diff --git a/02_PRODUITS_PHYSIQUES/Microphone/BOM/SESSION_SOURCING_CAPSULES_AVRIL_2026.md b/02_PRODUITS_PHYSIQUES/Microphone/BOM/SESSION_SOURCING_CAPSULES_AVRIL_2026.md new file mode 100644 index 0000000..f56214f --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/BOM/SESSION_SOURCING_CAPSULES_AVRIL_2026.md @@ -0,0 +1,411 @@ +# Session sourcing capsules — avril 2026 + +Trace ecrite de la session du 2026-04-14 sur le sourcing des capsules +large membrane pour [[Talas One]], suite a la session corps +[[SESSION_SOURCING_CORPS_AVRIL_2026]]. + +Contexte : le [[ETAT_PROTOTYPE_P1|prototype P1]] fonctionne avec une t.bone +SC600 cablee single-channel, mais presente une sensibilite 15 dB inferieure +au Vibe C1 commercial. On veut : comprendre la chaine d'approvisionnement +reelle des capsules LDC, identifier si aller "direct usine" est rentable, +et etablir une short-list de test qui couvre l'espace sonore sans depasser +le budget. + +Documents lies : +- [[SOURCING_COMPOSANTS]] section 1 (capsules LDC Talas One) +- [[STRATEGIE_GAMME]] section 6 (decision capsule du 2026-03-27) +- [[ETAT_PROTOTYPE_P1]] (probleme sensibilite + POL) +- [[JOURNAL_DEBUG_PROTOTYPE_P1]] + +--- + +## 1. Point de depart — etat du P1 + +### Capsule actuelle + +**t.bone SC600** (Thomann, ~15 EUR), dual-diaphragm K67-style, **cablee +single-channel** (1 diaphragme rear vers SGNL_B1, l'autre flottant). + +### Probleme identifie sur P1 + +Le journal debug ([[ETAT_PROTOTYPE_P1]] ligne 235) note : +- **Sensibilite 15 dB plus basse** que le Vibe C1 commercial de reference +- **Causes suspectees** : + 1. Capsule SC600 sous-performante + 2. Tension POL (~25 V) trop basse vs commercial (~50-60 V) + 3. Preamp bodge non optimal + +**Implication critique pour le test capsules :** tant que le POL n'est pas +valide a la valeur nominale, **aucune capsule haut de gamme ne sonnera +correctement sur le P1**. Mesurer et corriger POL avant ou en parallele du +test capsules — sinon on teste le circuit, pas les capsules. + +La tension POL doit etre mesuree avec une sonde oscillo x10 (pas multimetre +direct — voir [[ETAT_PROTOTYPE_P1]] ligne 77 : diviseur R1 1G / Zmetre 10M +donne une lecture ~5 V pour une realite ~25 V). + +### Decision capsule existante (2026-03-27) + +Dans [[STRATEGIE_GAMME]] ligne 149 : **797 Audio CY002 retenue** comme capsule +de production. Pas encore commandee. + +--- + +## 2. Criteres techniques — ce que le PCB AliceOPA accepte + +Le preampli P2 (OPA1642, derive Alice OPA de DJJules) attend : + +| Critere | Valeur attendue | Remarque | +|---------|-----------------|----------| +| **Type** | True condenser (pur, **pas electret**) | Electret = circuit different (Talas Lite avec THAT1512) | +| **Diametre** | 34 mm standard Neumann | Compatible corps BM-800/U87 actuels | +| **Terminaison** | Center-term OU edge-term | Les deux marchent, cablage adapte | +| **Polarisation externe** | 40-60 V (circuit actuel : ~25 V, point faible) | Voir section 1 | +| **Cablage** | 3 fils minimum : body + diaphragme avant + diaphragme arriere (si dual) | Le P1 cable 3 fils, un flottant | +| **Style** | K47, K67, K87, CK12 — tous compatibles | Sonorites differentes, choix esthetique | +| **Sensibilite cible** | -35 a -40 dB (1V/Pa) | En dessous, preamp force et bruit monte | +| **Bruit propre capsule** | < 18 dB-A | Pour atteindre 16-18 dB-A au micro complet | + +**Differences topologiques a garder en tete :** +- **K47** : son "chaud", mediums proeminents, signature U47 +- **K67** : pic presence 5-10 kHz, signature U87 +- **CK12** : son "aere", equilibre, signature C12/C414 +- **K87** : variante de K67, tres proche + +**Incompatibles (pieges) :** JLI-3413AU01, JLI-103, JLI-3410AU sont listees +"LDC 34mm" mais sont en realite **electret** — non compatibles AliceOPA. +Verifier "true condenser" avant achat. + +--- + +## 3. Supply chain reelle — qui fabrique vraiment quoi + +Insight cle : dans le monde des capsules LDC, il y a **peu de vrais fabricants** +(5-6 dans le monde). Tout le reste est soit du rebranding, soit de la +modification lourde. La vraie question n'est pas "reseller ou usine", mais +**"le markup du reseller correspond-il a de la valeur technique ajoutee ?"**. + +### Vrais fabricants + +| Marque | Localisation | Modele | Echelle | +|--------|--------------|--------|---------| +| **797 Audio** | Pekin, Chine | CY002, CY037, CY032 | Grande serie, OEM pour Studio Projects/Soundelux/Rode K2 rumored | +| **ShuaiYin** (contact Jenny) | Enping, Chine | K67/K47/CK12 custom | Moyenne serie, ex-employee devenue independante | +| **MaiAo** (diy-microphone.com) | Chine | K67/K47/CK12 + kits complets | Petite serie | +| **Transound** | Taiwan | TSB-165A (16.5mm — **pas LDC**) | Specialiste electret petit format | +| **Thiersch** | Allemagne | STW7 Blue M7 PVC | Boutique, historiquement fidele | +| **Heiserman** | USA | HK47/67/87/12 | One-man shop, **sold out depuis 2024** | +| **BeesNeez** | Australie | CK12, M7 laiton gun barrel | Boutique, main-assemblee Ben Sneesby | +| **Neumann** | Berlin | K67/K87 authentiques | Pieces detachees, ~600 EUR | +| **MAIKU** | Europe (Luxembourg/DE) | K47/K87/CK12 Mylar 6μm gold | Pre-commande, petite serie | + +### Resellers "serieux" — modification lourde = valeur ajoutee reelle + +| Marque | Realite | +|--------|---------| +| **Microphone-Parts** (Matt McGlynn, USA) | Spec Mylar **3 μm** (vs 6μm standard), QC individuel, tolerances serrees. RK-47/RK-87/RK-12 a 169 USD sont un **vrai upgrade** vs capsules chinoises standard. | +| **Advanced Audio** (Dave Thomas, Canada) | Shells chinois + **Mylar allemand 6μm** + assemblage Canada. AK67/AK47/AK12 99-119 USD. Consistency saluee GroupDIY. | +| **Peluso** (John Peluso, USA) | Shells chinois + **rebuild USA** (diaphragme neuf, tensionnage manuel). CEK/P-K 175-319 USD. | +| **Arienne Audio** | Boutique builder/modifier, ~118-298 USD, souvent sold out | + +### Resellers "budget" — rebranding avec peu ou pas d'ajout technique + +| Marque | Realite | +|--------|---------| +| **JLI Electronics** (USA) | Design partiel en interne + sourcing Chine. JLI-CK12 63 USD = correct mais markup 2x vs equivalent usine | +| **Studio 939** (Coree) | Pure reseller de capsules Enping curees. 55-73 USD | +| **t.bone** (Thomann/DE) | Rebranding Chine budget, 15 EUR. Capsule du P1 actuel | + +### Usines nameless sans QC + +**1688.com / AliExpress generics** : vrais produits usine Enping, prix plancher +3-10 EUR, **loterie qualite brutale** (15-35 % de defauts selon GroupDIY — +diaphragmes froisses, particules, mauvaise tension). + +--- + +## 4. MEGA tableau — toutes les possibilites + +Format compact. Colonnes : Prix unit. / Livre FR (3-5 pcs) / Qualite / +Consistance (QC) / Dispo / MOQ / Viabilite prod / Q/P. + +### Tier A — Direct usine (fabricants reels) + +| # | Source | Modele | Prix u. | Livre FR | Qualite | Consistance | Dispo | MOQ | Prod | Q/P | +|---|--------|--------|---------|----------|---------|-------------|-------|-----|------|-----| +| A1 | 797 Audio direct (email) | CY002 K67/K87 34mm | ~50 USD | ~320 USD / 5 pcs | 4/5 | 4/5 | 2-4 sem | 1 possible, vol 10+ | **Excellente** | ★★★★★ | +| A2 | 797 Audio store AliExpress | CY002 | ~55-70 USD | ~60 EUR/pc | 4/5 | 4/5 | 2-3 sem | 1 | Excellente | ★★★★☆ | +| A3 | 797 Audio direct | CY037 K67 4-wire | devis | ~300 EUR / 5 | 4/5 | 4/5 | email | 10+ | Tres bonne | ★★★★☆ | +| A4 | MaiAo (diy-microphone.com) | K67/K47/CK12 34mm | 35-60 USD | 50-75 EUR/pc | 3/5 | 3/5 | email | 1 | Possible | ★★★☆☆ | +| A5 | ShuaiYin / Jenny | Custom K67/47/CK12 | devis | ~50-80 EUR/pc | 3-4/5 | 3/5 | email GroupDIY | 10+ | Bonne si contact OK | ★★★☆☆ | +| A6 | Thiersch (DE) | STW7 Blue M7 PVC | 358-400 USD | ~400 EUR/pc | 5/5 | 5/5 | boutique | 1 | Trop cher | Mauvais prod | +| A7 | BeesNeez (AU) | CK12 / M7 | 345-445 AUD | 280-350 EUR/pc | 5/5 | 5/5 | email | 1 | Trop cher | Mauvais prod | +| A8 | Heiserman (US) | HK47/67/87/12 | 500-650 USD | indispo | 5/5 | 5/5 | **sold out** | — | — | — | +| A9 | Neumann pieces detachees | K67/K87 authentique | ~600 EUR | ~650 EUR | 5/5 | 5/5 | distrib. | 1 | Hors sujet | Mauvais | +| A10 | MAIKU (EU) | K47/K87/CK12 | 125-160 EUR | 130-165 EUR (pas de douane) | 4/5 | 4/5 | pre-commande | 1 | Possible premium | ★★★☆☆ | + +### Tier B — Usines nameless Chine direct (MOQ faible) + +| # | Source | Modele | Prix u. | Livre FR | Qualite | Consistance | Dispo | MOQ | Prod | Q/P | +|---|--------|--------|---------|----------|---------|-------------|-------|-----|------|-----| +| B1 | AliExpress item 4000397399204 | 34mm K47/K49/K87 double-sided | **14,25 USD** | ~55-70 USD / 3 | 2-4/5 | **2/5** | 2-4 sem | 1 | Possible avec tri | ★★★★☆ si tri OK | +| B2 | AliExpress item 4000263578242 | 34mm K67/K87 hybride | 27,99 USD | ~100 USD / 3 | 3/5 | 2/5 | 2-4 sem | 1 | Possible avec tri | ★★★☆☆ | +| B3 | AliExpress item 32811427368 | 34mm double-sided M7/K47 | 27,99 USD | ~100 USD / 3 | 3/5 | 2/5 | 2-4 sem | 1 | Possible | ★★★☆☆ | +| B4 | **1688.com via CSSBuy** | K67 34mm nameless | **3-10 EUR** | **80-120 EUR / 10 pcs** | 2-4/5 | **1/5 loterie** | 3-5 sem | 10+ | **Possible si loterie OK** | **★★★★★ si loterie / ★★☆☆☆ sinon** | +| B5 | 1688 micro complet BM-800 a vider | Capsule native BM-800 | 2-3 EUR micro | ~3-5 EUR/capsule | 1/5 | 2/5 | 3-5 sem | 20+ | **Deconseille** (capsule trop bruyante -60 dB) | Mauvais | +| B6 | eBay "34mm K67" vendeur CN | Generique identique AE | 15-35 USD | 30-50 USD/pc | 3/5 | 2/5 | 2-3 sem | 1 | Possible | ★★★☆☆ | + +### Tier C — Resellers budget (rebranding peu d'ajout) + +| # | Source | Modele | Prix u. | Livre FR | Qualite | Consistance | Dispo | MOQ | Prod | Q/P | +|---|--------|--------|---------|----------|---------|-------------|-------|-----|------|-----| +| C1 | JLI Electronics | JLI-3413AU01 (electret — **pas compatible P2**) | 25,86 USD | — | — | — | — | — | **INCOMPATIBLE** | — | +| C2 | JLI Electronics | JLI-103 LDC (verifier true condenser) | 51,79 USD | ~85 EUR | 4/5 | 4/5 | 1-2 sem | 1 | Bonne | ★★★★☆ | +| C3 | **JLI Electronics** | **JLI-CK12 dual edge-term** | **63,09 USD** | **~95-100 EUR** | 4/5 | 4/5 | 1-2 sem | 1 | Bonne | ★★★★☆ | +| C4 | Studio 939 | Budget K67 34mm | 55 USD | ~85 EUR | 3/5 | 3/5 | 2-3 sem | 1 | Possible | ★★★☆☆ | +| C5 | Studio 939 | Budget K47 34mm | 60 USD | ~90 EUR | 3/5 | 3/5 | 2-3 sem | 1 | Possible | ★★★☆☆ | +| C6 | Studio 939 | Edge-term CK12-compat 34mm | 73 USD | ~105 EUR | 4/5 | 4/5 | 2-3 sem | 1 | Bonne | ★★★☆☆ | +| C7 | **t.bone SC600** (Thomann) | Dual K67 budget | **15 EUR** | **15 EUR** | 2/5 | 3/5 | 2-3 jours | 1 | ⚠ **Sous-performante confirmee P1** | ★★★☆☆ | + +### Tier D — Resellers serieux (modification lourde, valeur reelle) + +| # | Source | Modele | Prix u. | Livre FR | Qualite | Consistance | Dispo | MOQ | Prod | Q/P | +|---|--------|--------|---------|----------|---------|-------------|-------|-----|------|-----| +| D1 | Advanced Audio | AK89 K67/K89 26mm | 59 USD | ~90 EUR | 4/5 | 5/5 | 2 sem | 1 | Bonne | ★★★★☆ | +| D2 | **Advanced Audio** | **AK67 K67 ameliore 28,7mm** | **99 USD** | **~135 EUR** | 5/5 | 5/5 | 2 sem | 1 | Bonne (etalon qualite) | **★★★★★** | +| D3 | Advanced Audio | AK47 K47 26mm | 119 USD | ~160 EUR | 5/5 | 5/5 | 2 sem | 1 | Bonne | ★★★★★ | +| D4 | Advanced Audio | AK12 CK12 27,8mm | 99 USD | ~135 EUR | 5/5 | 5/5 | 2 sem | 1 | Bonne | ★★★★★ | +| D5 | Microphone-Parts | **RK-47** K47 dual Mylar **3μm** | 169 USD | ~220 EUR | 5/5 | 5/5 | 2 sem | 1 | Edition premium | ★★★★☆ | +| D6 | Microphone-Parts | RK-87 K67/K87 dual 3μm | 169 USD | ~220 EUR | 5/5 | 5/5 | 2 sem | 1 | Premium | ★★★★☆ | +| D7 | Microphone-Parts | RK-12 CK12 dual 3μm | 169 USD | ~220 EUR | 5/5 | 5/5 | 2 sem | 1 | Premium | ★★★★☆ | +| D8 | Microphone-Parts | RK-47C cardioide 3μm | 109 USD | ~155 EUR | 5/5 | 5/5 | 2 sem | 1 | Possible mid-range | ★★★★☆ | +| D9 | Mic & Mod (FR) | K67 Premium Mylar 6μm gold DE | **199 EUR** | **199 EUR** (FR, zero douane) | 4/5 | 4/5 | 1 sem | 1 | Premium europeen | ★★★☆☆ | +| D10 | Peluso | CEK-89 K67/K89 | 175-184 USD | ~230 EUR | 5/5 | 5/5 | 2-3 sem | 1 | Premium | ★★★★☆ | +| D11 | Peluso | CEK-47/367/12 | 225-319 USD | ~270-360 EUR | 5/5 | 5/5 | 2-3 sem | 1 | Trop cher | ★★★☆☆ | +| D12 | ADK | GK12/GK67/GK47/GK251 | 300-450 USD | ~350-500 EUR | 5/5 | 5/5 | 2-3 sem | 1 | Trop cher | Mauvais Q/P | +| D13 | Arienne Audio | Flat K47 / K47 Accurate | 118-298 USD | ~170-370 EUR | 5/5 | 5/5 | **sold out** | — | indispo | — | + +--- + +## 5. Cout reel — formule d'ajustement + +Les prix bruts mentent. Coefficient a appliquer pour comparer honnetement : + +**Cout reel/capsule utile** = Prix brut × Coeff pays × (1 / Taux de survie QC) ++ Frais fixes/quantite + +### Coefficients + +| Origine | Coeff pays (port + douane) | Taux de survie | Frais fixes typiques | +|---------|---------------------------|----------------|---------------------| +| France (Mic & Mod) | ×1,00 | 95 % | 0 EUR | +| Europe (Thiersch, MAIKU, Thomann) | ×1,05 | 95 % | ~5 EUR | +| Canada/USA (Advanced Audio, Microphone-Parts, JLI, Peluso) | ×1,35 | 98 % | ~25 EUR | +| Chine direct reseller serieux (797 Audio) | ×1,30 | 90 % | ~20 EUR | +| AliExpress generique | ×1,20 (souvent sous seuil douane) | **65-75 %** | ~5 EUR | +| 1688 via CSSBuy/Superbuy | ×1,40 (port + TVA + agent) | **65-75 %** | ~30 EUR | + +### Exemples — commande UNITAIRE + +| Source | Prix brut | Cout reel livre | Survie | **Cout effectif/capsule utile** | +|--------|-----------|-----------------|--------|--------------------------------| +| AliExpress 14,25 USD (B1) | 13 EUR | 13×1,2+5 = **20 EUR** | 70 % | **29 EUR** | +| t.bone SC600 (C7) | 15 EUR | **15 EUR** | 95 % | **16 EUR** — qualite plafonnee 2/5 | +| JLI-CK12 (C3) | 63 USD = 57 EUR | 57×1,35+25 = **102 EUR** | 98 % | **104 EUR** | +| 797 Audio CY002 (A1) | 50 USD = 46 EUR | 46×1,3+20 = **80 EUR** | 90 % | **89 EUR** | +| Advanced Audio AK67 (D2) | 99 USD = 90 EUR | 90×1,35+25 = **147 EUR** | 98 % | **150 EUR** | +| Microphone-Parts RK-47 (D5) | 169 USD = 154 EUR | 154×1,35+25 = **233 EUR** | 98 % | **238 EUR** | + +**Insight :** en commande unitaire, la SC600 explose le Q/P reel (16 EUR +effectifs) mais sa qualite plafonne a 2/5, ce qui explique la sous-performance +du P1. + +### Exemples — serie LOT 50 (diluer les frais fixes) + +| Source | Prix unit. lot 50 | Frais fixes lot | Cout unit. reel | Survie | **Cout effectif/capsule utile** | +|--------|-------------------|-----------------|-----------------|--------|--------------------------------| +| **1688 nameless (B4)** | 5 EUR | 100 EUR (port+TVA) | 5+2 = **7 EUR** | **70 %** | **10 EUR** — imbattable si loterie OK | +| AliExpress generique (B2) | 20 EUR tiered | 30 EUR | 20+0,60 = **20,60 EUR** | 70 % | **29 EUR** | +| **797 Audio CY002 direct (A1)** | 35 EUR vol 50+ | 130 EUR | 35+2,60 = **37,60 EUR** | 90 % | **42 EUR** — **choix rationnel** | +| JLI-CK12 (C3) | ~50 EUR | 150 EUR | 50+3 = **53 EUR** | 98 % | **54 EUR** | +| Advanced Audio AK67 (D2) | ~82 EUR | 190 EUR | 82+3,80 = **85,80 EUR** | 98 % | **88 EUR** | +| Mic & Mod K67 (D9) | 199 EUR | 0 | **199 EUR** | 95 % | **210 EUR** | + +### Verdict serie 50 Talas One + +**Hierarchie pour lot 50 :** + +1. **1688 nameless : 10 EUR/capsule utile** — imbattable, mais **loterie**. + Risque 35/50 defauts → tri manuel frustrant, possible refabrication. +2. **797 Audio CY002 direct : 42 EUR/capsule utile** — qualite confirmee + (OEM Studio Projects/Soundelux). **Choix rationnel serie.** +3. **JLI-CK12 : 54 EUR/capsule utile** — sur-sur, mais 30 % plus cher que + 797 Audio pour resultat equivalent. + +**"Mieux ET moins cher que SC600" n'est possible que par :** +- **797 Audio direct** (voie certaine, +27 EUR/unite vs SC600 mais qualite 4/5) +- **1688 nameless a petite echelle** (voie incertaine, +0 EUR/unite si loterie, + mais risque 30 % capsules DOA) + +Les capsules techniquement superieures (RK-47, AK67, Peluso) sont **2x+ plus +cheres** et leur superiorite (Mylar 3μm, QC chambre anechoique) **n'est +audible que sur systeme monitoring de reference** — utilisateurs Talas ne +l'entendront pas. + +--- + +## 6. Short-list finale pour tests + +Objectif : couvrir l'espace sonore (K67, CK12, floor, factory-direct) sans +exploser le budget. + +| # | Capsule | Prix test | Source | Role | +|---|---------|-----------|--------|------| +| **0** | t.bone SC600 (deja chez toi) | 0 EUR | Thomann | Baseline actuelle | +| **1** | **797 Audio CY002 ×5 direct** | ~250-300 EUR | litianyu@797audio.com | **Candidat production**, decision 27/03 a valider | +| **2** | **JLI-CK12 ×1** | ~85 EUR | jlielectronics.com | Reference reseller serieux, CK12 edge-term | +| **3** | **AliExpress 34mm K67 ×3** | ~60 EUR | [item 4000397399204](https://www.aliexpress.com/item/4000397399204.html) | Test floor marche (acheter 3 garder 2) | +| **4** | **1688 nameless K67 ×10 via CSSBuy** | ~80-120 EUR | CSSBuy/Superbuy | **Test loterie** — si OK, economie ~30 EUR/u serie | + +### Variantes budget + +| Version | Composition | Budget | +|---------|-------------|--------| +| **Minimale** | 1 + 2 + 3 | ~180 EUR | +| **Recommandee** | 1 + 2 + 3 + 4 | **~475-585 EUR** | +| **Max info** | + Advanced Audio AK67 D2 (~135 EUR) comme etalon qualite absolu | **~600 EUR** | + +--- + +## 7. Actions concretes + +### Bloquantes — a lancer des que possible + +- [ ] **Mail 797 Audio** ([litianyu@797audio.com](mailto:litianyu@797audio.com)) : + demande devis 5 et 50 pcs CY002, pattern (cardioide ou multi), centering dual, + delai, port France, RoHS. Chemin critique 2-4 semaines. +- [ ] **Mesurer vraie tension POL** sous charge capsule, avec sonde oscillo x10 + (pas multimetre direct). Ref [[ETAT_PROTOTYPE_P1]] ligne 77. Bloquant pour + l'interpretation des tests capsules. +- [ ] Si POL < 40 V reel : **corriger le hex inverter** avant tests capsules. + Ref [[CORRECTIONS_PCB_P2]] et [[ANALYSE_BRUIT_50HZ_P1]]. + +### Parallele — commandes + +- [ ] Commander **JLI-CK12 ×1** chez jlielectronics.com (carte, ~85 EUR livre) +- [ ] Commander **3 capsules AliExpress 34mm** (item 4000397399204 ou similaire) +- [ ] Optionnel : **10 capsules 1688 nameless** via CSSBuy (voir session corps + pour le workflow CSSBuy) avec inspection photo +- [ ] Optionnel max info : **Advanced Audio AK67 ×1** chez advancedaudio.ca + (~135 EUR livre) + +### Preparer le banc de test + +- [ ] Position reproductible (support, distance source 30 cm) +- [ ] Source sonore fixe : tap-test mecanique + voix + bruit rose reference +- [ ] Meme preamp, meme gain, meme interface (Audient iD14) +- [ ] Enregistrement a la suite sous Audacity/REW +- [ ] Metriques a relever : sensibilite relative (dB), RSB, reponse en + frequence (si REW), SPL max percu + +### A reception + +- [ ] Tester les capsules 1 par 1 sur le P1 avec POL correct +- [ ] Remplir un tableau comparatif (sensibilite, bruit, couleur) +- [ ] Decision capsule production serie 50 + +--- + +## 8. Template mail 797 Audio (a envoyer en priorite) + +``` +Subject: Request for quotation — CY002 capsule samples + +Hello, + +I'm developing an open-hardware condenser microphone (CERN-OHL-W licence) +and I'm interested in your CY002 capsule for prototyping and small-batch +production. + +Could you provide a quotation for: +- 5 pieces CY002 (sample order for testing) +- 50 pieces CY002 (future production) + +Please also confirm: +- Available polarization patterns (cardioid / multi-pattern) +- Center-terminated or edge-terminated configuration +- Mounting dimensions and wiring diagram +- Lead time for 5 pcs and 50 pcs +- Shipping options to France +- RoHS compliance certification + +Best regards, +Nikola — Talas Group +``` + +--- + +## 9. Points de vigilance + +### 9.1 Pieges "electret listee comme LDC" + +Certains catalogues JLI mentionnent "LDC 34mm" mais l'article est en fait +**electret integre** (JLI-3413AU01, JLI-3410AU...). **Non compatible** avec +AliceOPA qui attend une capsule passive polarisee externe. Verifier "true +condenser" ou "passive capsule" avant achat. + +### 9.2 POL bas = tous les tests biaises + +Si le POL reel du P1 est a 25 V au lieu de 50 V+, **toutes les capsules +sous-performeront**. Mesurer et corriger **avant** les tests de comparaison. + +### 9.3 Loterie 1688 — preparer le tri + +Attendre 30 % de capsules defectueuses (diaphragme froisse, particules, +tension incorrecte). **Faire venir l'inspection photo via CSSBuy** pour +filtrer les pires avant meme qu'elles quittent l'entrepot chinois. + +### 9.4 Differences topologiques = choix subjectif + +Pas moyen de savoir si on prefere K67 vs K47 vs CK12 sans ecouter. D'ou +l'interet de tester au moins 2 topologies differentes dans la short-list +(la JLI-CK12 joue ce role dans la selection ci-dessus, par opposition aux +K67 de la SC600 et des AliExpress). + +### 9.5 Resellers "serieux" vs "budget" + +Ne pas confondre : +- **Microphone-Parts, Advanced Audio, Peluso** = modification lourde reelle + (Mylar 3μm, German Mylar, rebuild USA). Markup justifie. +- **JLI, Studio 939, t.bone** = rebranding leger. Markup moins justifie, + equivalent trouvable direct usine. + +--- + +## 10. Sources de reference utilisees + +Fouille WebSearch/WebFetch du 2026-04-14 : + +- [797 Audio CY002 product page](https://www.797microphone.com/microphone-parts/micrphone-capasule/797audio-cy002-34mm-k67-capsule.html) +- [797 Audio store page](https://www.797microphone.com/) +- GroupDIY — [797 Capsules experience & prices](https://groupdiy.com/threads/797-capsules-experience-where-to-buy-them.87080/) +- GroupDIY — [Chinese Capsules development 797 etc](https://groupdiy.com/threads/chinese-capsules-development-797-etc.66642/) +- GroupDIY — [Experience with AliExpress condenser mic capsules](https://groupdiy.com/threads/experience-with-aliexpress-condenser-mic-capsules.87063/) +- Gearspace — [K67 capsule community reviews](https://gearspace.com/board/low-end-theory/1215338-k67-capsule-has-anyone-tried-these.html) +- AliExpress — [item 4000397399204 — 34mm 14,25 USD](https://www.aliexpress.com/item/4000397399204.html) +- AliExpress — [item 4000263578242 — 34mm 27,99 USD](https://www.aliexpress.com/item/4000263578242.html) +- AliExpress — [item 32811427368 — M7/K47 27,99 USD](https://www.aliexpress.com/item/32811427368.html) +- [Mic & Mod K67 Premium France](https://www.micandmod.com/k67-capsule-replacement-microphone/) +- [Microphone-Parts RK-47/RK-87/RK-12](https://microphone-parts.com/) + +Contacts cles : +- **797 Audio** : litianyu@797audio.com, +86-10-64310797 +- **Jenny / Shengyin** : [email protected] (GroupDIY) +- **MaiAo** : diy-microphone.com + +--- + +*Session menee le 2026-04-14. Voir aussi [[SESSION_SOURCING_CORPS_AVRIL_2026]] +pour la session corps complementaire. A reintegrer dans +[[SOURCING_COMPOSANTS]] section 1 apres validation par ecoute des premiers +echantillons recus.* diff --git a/02_PRODUITS_PHYSIQUES/Microphone/BOM/SESSION_SOURCING_CORPS_AVRIL_2026.md b/02_PRODUITS_PHYSIQUES/Microphone/BOM/SESSION_SOURCING_CORPS_AVRIL_2026.md new file mode 100644 index 0000000..2827273 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/BOM/SESSION_SOURCING_CORPS_AVRIL_2026.md @@ -0,0 +1,411 @@ +# Session sourcing corps de microphone — avril 2026 + +Trace ecrite de la session du 2026-04-13 / 2026-04-14 autour du sourcing +des corps metalliques pour [[Talas Lite]] et [[Talas One]]. + +Contexte : le [[ETAT_PROTOTYPE_P1|prototype P1]] est fonctionnel, on cherche +maintenant a preparer la premiere serie (10-50 unites) en optimisant le cout +du corps metallique. + +Documents lies : +- [[SOURCING_COMPOSANTS]] section 5 (corps metallique) — mis a jour avec + section 5.9 "Liens concrets identifies" pendant cette session +- [[STRATEGIE_GAMME]] section 4 (sourcing boitier) + +--- + +## 1. Point de depart + +### Methode actuelle validee + +1. Acheter un microphone condensateur generique BM-800 sur AliExpress (~10-15 EUR) +2. Ouvrir, retirer toute l'electronique d'origine +3. Garder uniquement le corps metallique (aluminium/zinc) +4. Integrer l'electronique Talas (PCB + capsule CY002 + circuit AliceOPA) + +### Question + +Comment descendre en-dessous de 10 EUR/corps en restant sur un MOQ faible, +et comment preparer le passage a la serie (~1 EUR/corps) ? + +--- + +## 2. Pistes deja documentees (rappel section 5.1-5.8) + +| Piste | Prix/u | MOQ | Statut | +|-------|--------|-----|--------| +| BM-800 AliExpress a vider | 10-15 EUR | 1 | **Methode actuelle** | +| eBay corps vides DIY | 21-53 USD | 1 | Alternatif proto | +| 1688.com via agent | 0,70-2 EUR | 50 | Cible serie | +| Alibaba Enping body-only | 1-5 USD zinc / 5-20 USD alu | 100-500 | Cible serie + | +| Jenny/Shengyin (GroupDIY) | ~89 USD (C414) | 50+ | Corps custom qualite | +| MaiAo (diy-microphone.com) | Variable | 3+ | Corps kits | +| Mic & Mod (France) | 99-349 EUR | 1 | Reference qualite, trop cher serie | +| JLCCNC custom | 10-30 EUR | 50 | Long terme, design original | +| Xometry EU | 30-80 EUR | 50 | Long terme, qualite garantie | + +--- + +## 3. Fouille web du 2026-04-13 — liens concrets + +Recherche WebSearch + WebFetch sur AliExpress, eBay, Made-in-China, Alibaba. +AliExpress bloque le fetch direct (JS pur), eBay timeout, mais les snippets +Google ont ramene assez de titres et prix pour construire une short-list. + +### AliExpress (MOQ 1) + +| Ref | Titre | Prix | Lien | +|-----|-------|------|------| +| AE-01 | For DIY U 87 microphone body shell part | a verifier | [item/1005005978739413](https://www.aliexpress.com/item/1005005978739413.html) | +| AE-02 | 20cm Light Gold Metal U87 Body + shockmount | ~49,99 USD | [item/1005002276379642](https://www.aliexpress.com/item/1005002276379642.html) | + +**Constat :** a l'unite, les corps vides sur AliExpress sont **plus chers** que +la methode actuelle (micro BM-800 complet a vider). Ils n'ont de sens que +pour un style U87/U47 specifique qu'on ne trouve pas en micro complet. + +### eBay (MOQ 1, Chine vers France) + +| Ref | Titre | Prix | Style | Lien | +|-----|-------|------|-------|------| +| EB-01 | Metal DIY Empty Tube Mic Body | 21,06 + 7,50 port = **28,56 USD** | LDC generique | [itm/146352881640](https://www.ebay.com/itm/146352881640) | +| EB-02 | Big Metal U87 Body + shockmount | 34,82 (1) / **30,64 (qty 4+)** | U87. Piliers internes cylindriques (PCB a fixer par corde) | [itm/205012805853](https://www.ebay.com/itm/205012805853) | +| EB-03 | TF47 Custom Mic Shell | **45,99 + 2 USD port** | Style Telefunken | [itm/125820751204](https://www.ebay.com/itm/125820751204) | +| EB-04 | Multicolor Metal Mic Body | a verifier | Generique | [itm/115340957416](https://www.ebay.com/itm/115340957416) | +| EB-05 | 24CM HTT-U47 Silver Body | a verifier | U47 long | [itm/125866809751](https://www.ebay.com/itm/125866809751) | +| EB-06 | TF12 Tube Mic Body | a verifier | Tube vintage | [itm/115786652410](https://www.ebay.com/itm/115786652410) | +| EB-07 | Little u47 body | a verifier | U47 court | [itm/127338630934](https://www.ebay.com/itm/127338630934) | + +### Made-in-China (la meilleure trouvaille unitaire) + +| Ref | Titre | Prix | MOQ | Materiau | Lien | +|-----|-------|------|-----|----------|------| +| MIC-01 | DIY U Style 87/47/103/TF11/33/51 Body (Cast Sound Lighting, Guangzhou) | **7,85 - 55,75 USD** selon modele | **1** | Cuivre + alu | [castsoundlight.en.made-in-china.com](https://castsoundlight.en.made-in-china.com/product/WmHYzLaZJRpO/China-DIY-U-Style-87-47-103-TF11-33-51-Condenser-Microphone-Body-Large-Cardioid-Microphone-87-Condenser-Mic-Shell-Tube.html) | + +**Interet** : a 7,85 USD bas de gamme, c'est potentiellement **moins cher que la +methode BM-800 actuelle**, et le fournisseur est note 4,7/5 avec une capacite +500 000 pcs/mois. A contacter pour confirmer dimensions + devis 50 pieces. + +### Alibaba — MaiAo (diy-microphone.com) + +| Ref | Titre | Tiers prix | +|-----|-------|-----------| +| AB-01 | U47 DIY Body Shell Chrome Plated | 3-49 : **37,99** / 50-99 : **35,99** / 100-1999 : **34,99** / 2000+ : **29,99** USD | + +Cher relativement, mais reference structuree avec le meme vendeur derriere +diy-microphone.com (deja cite en section 5.3 du doc sourcing). + +### Synthese prix unitaires + +| Source | Prix | MOQ | Quand l'utiliser | +|--------|------|-----|------------------| +| BM-800 complet AliExpress a vider | **10-15 EUR** | 1 | Proto unitaire actuel | +| **Made-in-China MIC-01** | **7,85-55 USD** | 1 | **Tester en priorite** | +| eBay EB-01 | 28,56 USD | 1 | Proto LDC generique | +| eBay EB-02 | 30-35 USD | 1 | U87 avec shockmount | +| AliExpress AE-02 | ~50 USD | 1 | Esthetique U87 specifique | +| MaiAo AB-01 | 30-38 USD | 3 | Petits lots U47 qualite | +| **1688.com via agent** | **~1 EUR** | 50 | **Serie** | + +--- + +## 4. 1688.com — comprendre la plateforme + +### Qu'est-ce que 1688 + +Marche B2B **domestique chinois** du groupe Alibaba. C'est l'etage en-dessous +d'Alibaba.com : commercants chinois qui s'approvisionnent directement a l'usine. + +| | Alibaba.com | 1688.com | +|---|---|---| +| Cible | International | Chinois domestique | +| Langue | Anglais | **Chinois uniquement** | +| Prix | Marge export | **3-10x moins cher** | +| MOQ | 50-500 | 1-50 | +| Paiement | CB/PayPal | Alipay CN (carte chinoise) | +| Livraison | Internationale | **Chine continentale uniquement** | + +Un shell BM-800 a 5 USD sur Alibaba = **0,70-1,50 EUR** sur 1688. + +**Probleme :** 1688 refuse carte etrangere, langue etrangere, adresse etrangere. +Il faut un intermediaire chinois. + +### L'agent d'achat (daigou) + +Une boite chinoise qui commande a ta place. Les principaux pour Europeens : +**Superbuy, CSSBuy, Basetao, Pandabuy, Wegobuy**. + +### Workflow CSSBuy pas-a-pas + +1. **Inscription** sur cssbuy.com (gratuit) +2. **Trouver le produit** sur 1688 (via leur moteur ou en copiant l'URL 1688 directe) +3. **Coller l'URL** dans "Submit order", preciser quantite/variantes +4. **Payer** en EUR (Visa/PayPal/SEPA) — l'agent convertit en RMB et commande +5. **Vendeur livre l'entrepot agent** (Guangzhou) — 2-7 jours +6. **Inspection qualite** optionnelle (~1-2 EUR/article avec photos) — **recommande + pour les corps de micro** (verifier absence de defauts, peinture, RoHS) +7. **Entrepot** : gratuit 60-90 jours +8. **Checkout expedition internationale** : choix transporteur + port au poids reel +9. **Livraison France** : 7-20 jours (EMS lent/cheap, DHL rapide/cher) + +### Structure de frais pour un lot 50 shells BM-800 + +| Poste | Estime | +|-------|--------| +| Prix produit (50 × 1 EUR) | 50 | +| Livraison domestique Chine | 3-5 | +| Commission agent (0-5 %) | 0-3 | +| Inspection photo | 5-15 | +| **Sous-total en Chine** | **~60-75 EUR** | +| Port international EMS (~12 kg) | 30-50 | +| Port international DHL | 60-80 | +| TVA + douane FR (20 % + ~15 EUR si > 150 EUR total) | 20-30 | +| **Total livre France (EMS)** | **~110-155 EUR** | +| **Par corps** | **~2,20 - 3,10 EUR** | + +Meme avec tous les frais : **4 a 7x moins cher** que l'achat unitaire AliExpress, +et le ratio s'ameliore avec le volume (le port international ne double pas en +passant de 50 a 100 corps). + +### Comparatif agents + +| Agent | Commission | Points forts | URL | +|-------|-----------|--------------|-----| +| **CSSBuy** | **0 %** (marge cachee dans taux change) | Interface propre, entrepot Guangzhou, bonne reputation Reddit | cssbuy.com | +| **Superbuy** | ~5 % explicite | UX la plus polie, appli mobile excellente, recherche 1688/Taobao integree | superbuy.com | +| **Basetao** | Forfait faible | Bien pour petites commandes test | basetao.com | + +**Choix retenu pour premiere commande :** CSSBuy (zero commission, prix vrai). + +--- + +## 5. Observation importante du 2026-04-14 + +**Constat du user apres recherche** : toutes les repliques basiques U87/BM-800, +peu importe le prix ou la marque (Neewer, Tonor, ZealSound, MAONO, BM-700, +BM-900...), partagent **exactement le meme corps metallique**. Il y a +essentiellement **UN seul corps canonique** coule dans 3-4 usines d'Enping, +avec juste peinture/logo differents. + +**Consequence strategique** : on ne cherche pas "le bon modele", on cherche +**le vendeur le moins cher qui accepte MOQ faible**. C'est un produit de commodite. + +--- + +## 6. Termes de recherche 1688 (a coller dans CSSBuy) + +### Corps vide seul + +``` +麦克风外壳 +``` +*mic housing* — le plus generique + +``` +话筒外壳 +``` +*mic shell* — synonyme, autres vendeurs + +``` +电容麦克风外壳 +``` +*condenser mic shell* — filtre sur condensateurs + +``` +BM800外壳 +BM-800 外壳 +``` +Direct sur le modele (les deux graphies donnent des resultats differents) + +``` +U87外壳 +U87 话筒外壳 +``` +Specifiquement style U87 + +``` +录音麦克风金属外壳 +``` +*recording mic metal shell* — sort plutot de l'alu propre que du zinc peint + +### Micro complet a vider (souvent moins cher que le shell seul) + +Sur 1688, un BM-800 complet neuf est parfois a **15-25 RMB** (2-3 EUR), +moins cher que le shell vendu seul (5-15 RMB), parce que les usines +liquident des fins de serie. + +``` +BM800电容麦克风 +``` +*BM800 condenser mic* + +``` +电容麦克风批发 +``` +*wholesale condenser mic* + +``` +电容麦克风 厂家 +``` +*condenser mic factory* (usines directes vs revendeurs) + +### Mots a eviter dans les titres (= pas ce qu'on veut) + +- `支架` support / trepied +- `话筒架` pied de micro +- `防喷罩` / `防风罩` bonnette anti-pop +- `声卡` carte son +- `无线` sans fil +- `手持` micro a main + +### Mots positifs a reperer dans les listings + +- `工厂` / `工厂直销` — usine directe (meilleur prix) +- `批发` — wholesale +- `定制` / `定做` — customisable (logo, couleur, gravure) +- `现货` — **en stock** (vs fabrication a la commande +2 semaines) +- `包邮` — port domestique Chine gratuit +- `阳极氧化` — anodise (alu qualite) +- `锌合金` — zinc die-cast (standard BM-800, lourd, peint) +- `铝合金` — aluminium (plus leger, plus rare, souvent plus cher) + +### Filtres a appliquer dans CSSBuy/1688 + +1. **Tri prix croissant** (`价格从低到高`) +2. **"起订量 1 件"** ou **"1 起批"** — MOQ = 1 +3. **"支持混批"** (*supports mixed wholesale*) — accepte petits lots melanges +4. **Localisation** : `广东 Enping 恩平` ou `广东 广州 Guangzhou` — hub du micro +5. **Score vendeur** (`回头率`) : viser > 20 % + +--- + +## 7. Templates messages vendeurs + +### Anglais (a coller en premier dans le chat CSSBuy) + +``` +Hello, I would like to order 5 pieces for sample testing. +Please confirm: +1. Internal diameter (inside where PCB sits) +2. Total length and outside diameter +3. Material: zinc or aluminum? +4. Is it RoHS compliant (lead-free)? +5. Price per piece for 5 pcs, and for 50 pcs. +Thank you. +``` + +### Chinois (backup — certains vendeurs ne lisent que le chinois) + +``` +你好，我想订购5件样品测试。请确认： +1. 内径（PCB安装处的内部直径） +2. 总长度和外径 +3. 材料：锌合金还是铝合金？ +4. 是否符合ROHS（无铅）？ +5. 5件和50件的单价？ +谢谢。 +``` + +--- + +## 8. Pieges a connaitre + +### 8.1 RoHS + +Les shells 1688 bas de gamme sont souvent en zinc die-cast avec plomb residuel. +Pour la conformite CE : +- Demander explicitement `无铅 ROHS认证` (sans plomb, certifie RoHS) +- Garder un echantillon pour test XRF en Europe (~50 EUR labo francais) +- Voir [[SOURCING_COMPOSANTS]] section 8 pour le detail conformite + +### 8.2 Photos vs realite + +Les photos 1688 sont souvent celles de l'usine d'origine. Le shell recu +peut avoir des defauts de finition. **Inspection photo CSSBuy indispensable**. + +### 8.3 Peinture interieure isolante + +Les shells chinois ont souvent une couche de peinture/vernis interieure qui +empeche le contact masse (confirme par la communaute GroupDIY). + +**Solutions** : +- Demander `内部无涂层` (sans revetement interieur) — marche rarement +- Plan B : grattage manuel au papier de verre aux points de contact blindage + +### 8.4 MOQ cachees + +Le prix affiche sur 1688 est souvent pour MOQ 50+. Certains vendeurs refusent +en dessous meme si l'annonce dit "1 起批". L'agent confirme avant commande. + +### 8.5 Delai total reel + +**3-5 semaines** du clic au colis France. Pas 1 semaine. A integrer au planning. + +### 8.6 Montage PCB + +Certains corps (comme EB-02 ci-dessus) ont des piliers internes cylindriques : +**PCB fixable par corde uniquement, pas par vis**. Verifier la photo interieure +avant d'acheter, ou demander au vendeur. + +--- + +## 9. Recommandation finale + +### Phase 1 — Maintenant (proto unitaire) + +**Rester sur la methode BM-800 AliExpress a vider.** Validee, workflow maitrise, +zero friction, OK pour 5-10 protos. Ne pas changer tant que le design PCB n'est +pas gele. + +### Phase 2 — Avant commande serie (semaines prochaines) + +**Preparer le terrain** : +1. Mesurer precisement le corps P1 actuel : diametre interieur, longueur, + pas de vis grille, diametre du PCB P2 +2. Ouvrir compte **CSSBuy** (30 min, gratuit, charger 20 EUR wallet) +3. Se familiariser avec l'interface, tester un search +4. Contacter **Cast Sound Lighting** (Made-in-China MIC-01) pour devis + et dimensions precises + +### Phase 3 — Commande test (~30 EUR) + +**5 shells 1688 via CSSBuy** pour validation avant serie : +- Fouille 30 min avec les termes ci-dessus +- Short-list 3-4 vendeurs prix < 10 RMB, MOQ 1, Guangdong, `现货` +- Commande 5 unites avec inspection photo +- Attendre 3-5 semaines +- Valider compatibilite PCB + qualite + RoHS + +### Phase 4 — Lot 50 + +Une fois le vendeur confirme : commande serie ~50-100 unites. + +**Economie attendue** : passage de ~12 EUR/corps a ~2-3 EUR/corps livre += **500 EUR d'economie sur un lot 50 Talas One**. A 10-20 Talas One produits, +la ligne "corps" devient negligeable (~5 % du cout materiau) et l'attention +se porte sur la capsule et les PCBs. + +### Phase 5 — Long terme (design Talas original) + +Quand l'identite visuelle est stabilisee : +- Dessin CAD corps original Talas (FreeCAD/Fusion360) +- Devis JLCCNC (~10-30 EUR/u) et Xometry (~30-80 EUR/u) +- Aluminium anodise avec logo grave + +--- + +## 10. Prochaines actions concretes + +- [ ] **Mesurer le corps P1** (Ø interieur, longueur, pas de vis grille) — **bloquant** +- [ ] Creer compte CSSBuy + charger wallet 20 EUR test +- [ ] Contacter Cast Sound Lighting via Made-in-China ([lien MIC-01](https://castsoundlight.en.made-in-china.com/product/WmHYzLaZJRpO/China-DIY-U-Style-87-47-103-TF11-33-51-Condenser-Microphone-Body-Large-Cardioid-Microphone-87-Condenser-Mic-Shell-Tube.html)) +- [ ] Fouille 1688 via CSSBuy avec les termes chinois de section 6 — short-list 3-4 vendeurs +- [ ] Commande test 5 shells avec inspection photo +- [ ] Test XRF RoHS sur 1 echantillon a reception +- [ ] Valider compatibilite PCB + finition +- [ ] Commande serie lot 50 + +--- + +*Session menee les 2026-04-13 et 2026-04-14. Voir aussi +[[SOURCING_COMPOSANTS]] section 5.9 pour les liens concrets integres au doc +sourcing de reference.* diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_hex_inverter_pcb_prototype_p1_rev2/W754467AS3P9_export_gerbers.rar b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_hex_inverter_pcb_prototype_p1_rev2/W754467AS3P9_export_gerbers.rar new file mode 100644 index 0000000..29ecf5f Binary files /dev/null and b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_hex_inverter_pcb_prototype_p1_rev2/W754467AS3P9_export_gerbers.rar differ diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_hex_inverter_pcb_prototype_p1_rev2/guide_test_hex_inverter.pdf b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_hex_inverter_pcb_prototype_p1_rev2/guide_test_hex_inverter.pdf new file mode 100644 index 0000000..a493e54 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_hex_inverter_pcb_prototype_p1_rev2/guide_test_hex_inverter.pdf @@ -0,0 +1,422 @@ +%PDF-1.4 +% ReportLab Generated PDF document (opensource) +1 0 obj +<< +/F1 2 0 R /F2 3 0 R /F3 4 0 R /F4 8 0 R /F5 9 0 R /F6 10 0 R +>> +endobj +2 0 obj +<< +/BaseFont /Helvetica /Encoding /WinAnsiEncoding /Name /F1 /Subtype /Type1 /Type /Font +>> +endobj +3 0 obj +<< +/BaseFont /Helvetica-Bold /Encoding /WinAnsiEncoding /Name /F2 /Subtype /Type1 /Type /Font +>> +endobj +4 0 obj +<< +/BaseFont /Helvetica-Oblique /Encoding /WinAnsiEncoding /Name /F3 /Subtype /Type1 /Type /Font +>> +endobj +5 0 obj +<< +/Contents 29 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 28 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +6 0 obj +<< +/Contents 30 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 28 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +7 0 obj +<< +/Contents 31 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 28 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +8 0 obj +<< +/BaseFont /Courier-Bold /Encoding /WinAnsiEncoding /Name /F4 /Subtype /Type1 /Type /Font +>> +endobj +9 0 obj +<< +/BaseFont /Symbol /Name /F5 /Subtype /Type1 /Type /Font +>> +endobj +10 0 obj +<< +/BaseFont /ZapfDingbats /Name /F6 /Subtype /Type1 /Type /Font +>> +endobj +11 0 obj +<< +/Contents 32 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 28 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +12 0 obj +<< +/Contents 33 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 28 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +13 0 obj +<< +/Contents 34 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 28 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +14 0 obj +<< +/Contents 35 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 28 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +15 0 obj +<< +/Contents 36 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 28 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +16 0 obj +<< +/Contents 37 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 28 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +17 0 obj +<< +/Contents 38 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 28 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +18 0 obj +<< +/Contents 39 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 28 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +19 0 obj +<< +/Contents 40 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 28 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +20 0 obj +<< +/Contents 41 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 28 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +21 0 obj +<< +/Contents 42 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 28 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +22 0 obj +<< +/Contents 43 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 28 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +23 0 obj +<< +/Contents 44 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 28 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +24 0 obj +<< +/Contents 45 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 28 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +25 0 obj +<< +/Contents 46 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 28 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +26 0 obj +<< +/PageMode /UseNone /Pages 28 0 R /Type /Catalog +>> +endobj +27 0 obj +<< +/Author (\(anonymous\)) /CreationDate (D:20260329134239+00'00') /Creator (\(unspecified\)) /Keywords () /ModDate (D:20260329134239+00'00') /Producer (ReportLab PDF Library - \(opensource\)) + /Subject (\(unspecified\)) /Title (\(anonymous\)) /Trapped /False +>> +endobj +28 0 obj +<< +/Count 18 /Kids [ 5 0 R 6 0 R 7 0 R 11 0 R 12 0 R 13 0 R 14 0 R 15 0 R 16 0 R 17 0 R + 18 0 R 19 0 R 20 0 R 21 0 R 22 0 R 23 0 R 24 0 R 25 0 R ] /Type /Pages +>> +endobj +29 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 3000 +>> +stream +Gb"/(968iI'#*[5oOVd-LCh*!DUf^>H^sH*1X=W&cc$]TVJXUT%oZGjg-^>dG(UtEg/c4m;YIKZ6kiij^[Rp=J,kUZ,((/IJ2]9/FY#dKQsG?k9Z-3"I[s4$-JMlIrSSokg!"N&!HZuabi@/ea"9,,1dPrg9-K\2c@ba_Br`i0k&<#$IId4S/u<[ZG#M\3JH+>Dh86ep$iG)9WGL:oJYU-Id:#!!6[hscGQtK=@J64es,MEu19Tr>$BA-%G]7=,\j#JY;5F%/-#;5#O]Mq@4oYgD=[-A%Y)YNQ9S46CT_Y%tT'Dh#[o'0=D(>pOKTLt;u&FAQcpWr&S&oPQQZp3^W/OFom-t/CE+V13]!-CqX?(l=BcDpK9$$0Fi*1sI@#VH<0Lcs&f^_>nIKLh<[c&CaU,D"&fn[VaMARBZW=+d!\(ojF9HQSa`[%7+B,_#u6cA_>SM+/K2:\G"'t@4$Kbgt[W0F!<*eU-<%Y;roq(PC"aKeDi\ujtMA?s&]#ZVg*A38bMIq.i:B/E$G.H8;NQs?G%G*n"j/0cI\0su5_V>Z(b)s??MGGgZ^Y\no9g2Lj#la:ZE1$SJ(<:b\'T7gD%,PSio^I1[ZrIDS:/CS!kXaQ3Br9F\FV>oIU-$[7bb,',;IkNpBId<1$U@RR'8gTJ;E7_PX&,B2f2QuJT+i\H#o#,]H>:H(NS4C8K?EOk(%`a;Hf&86ht`K61edKM)P=>!E:>*2U=6A310J-*YM1emhp.o'Ok.Hsh*ACfgDhY<-l6n-^t8SHkM^bB]\DM)AOTTW";g;a$iD(Z$k)K;s>GJPT61dkbC!.Z6kd-.ZW@mEcC)#-?#;`DcNle%/4]/LWEE<$?710hGD*A)(I-=!ohHYqn5CB.KcfkY.^eV++'38^d3r<_oIZ8E0eV5"I90ac,h,I#/NsQXg*IAWtjTePAB9UFbGWL@gH:@GVRXs6lu5%j.[1jPJN1+=:o>fZ;A<]-OAI'*^rsiZ%cuRSddOB]AS9&>!&\r6H1P[]OK;fS7@tL(qJp&6LUX%SVG5<.qV.5cqBFQ,1/.YlcIXT.n"1uE@SmbE^]m/.;FG3,-b4X:2.C1K7mq2,Q=E;Gk8RD31b^+1@5V(Soi1!EB+`RjGr*d*bkR?hS>4I#;Wdr#Y(-u$MkU=3da@77H&/qg;P:8k!8lOkU%iMI%`pG+(uX8R._6P]?Qq$r!Gf-lnVh]Y`Y=I0O0fh'i.(-$tFH9U$#,m/?E7!;<'ZE=BJ66ga=q0h6PPO4YHOqM("C["NHQ>E>Fs40Lcci+@fEF*+tdUSuDk^FHY`BQNQtQ8O+80",7%YDbjmbD1:]N'YnB.``Ic]G6+'tR+HF6gEVReM1*l+!97DG1''_iM=$ZS-2$=?N!MRAf=[N0mt&*D&qp\:"K.WPZ+L_745g*W$F.uP)O[<_Orf-Z$=g'*Z`&hCK`H\;0/$&p%2agE06IVFO^V*SC_O$GPcB^c.G1KAO:+itdRbd]*O$+^&aDM*6$c=a:lL>X>bh&skY]S-kTVek,A0=VRI!PU@2nm("R(t+!.?!/NS?622YR;Lm/cEKi&6pi)[$'2dJ!:j1rXIg#k7d9bH-V]Zr6$::^C`Vi&K!;nFKj-^gVBnnK%>3df`GC:3Ddr=07!+0^s[^[8FH0%B<[OL\\>)SJ5BF;"tNF`0WJJ+Xu8I>)8/]';!Nt@=$,iF``-K%sqdksZ_6PRr@:/\,\8cnu_)o+\"U-1[2_<)!Zg&q,8jB-Xd56cUeJZogc$HjBJj2^)=7o?lF8Q,Im]XN"VIPX/HgMoY;5R3O?h0!1Y>\p7KZa.s_(nDSehh-kfs=SLmJ[u[Pj'9,a#6M)B@HO8V+ENIifFZDPlBY_^XKbfq&GajM1R*!:'~>endstream +endobj +30 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 840 +>> +stream +Gatn%?#SI?'Sc)T/'cu!8Y^gPLp>oL=e:KO7j73V8-WL?n>%-m$#/qMMQqX;%59H+Kc;TCD*P05m9#E6n/WFZ<"gh>%:-q@jh3M/L_"TM8iHQA&?YK*#C>f;]ou=nl9NTpf,Qm3ABQPbC+5?S#33+gR=o0f5F%lPXliCLT$5d_<6<`f)C=07&#N9\4.!"Im9NE6CCThj,YrcH*B-f0k^g-WCtuU0S_qk$WJUpJLHb9eAr(T7Qca`R,@U\O^JBBn#L0:cg0FZV8*/#\j2*sEI>l*/_6.oHK\$W['lT'3ul/SnWVoao$2@H3']?c]raucRZVLH@=+qH2meB'eF'KhSSdWuOD-u$3#&0>nm0]Z[OcE7FpHCKel:5-*OKE_idLRO=C0l5-748cJ=tn4d*.mq)nGB6S56T7HgDU9D)[if1et)?;tm^AVPuE_a="mpnW@`r=sq[Z&$]0Y)j'e-O@$NO&dBd+OZ%Aek9Z'*7<]WrBkI>LW[Q-0g&K`9897A?Y_eJo)nj/F_QIU"CZ+nu21[0OPGg0'E[4g!H&7m/fgRhXmU=]#h/6]&699lc)/O$YD;B(lPSppg.-?dZ_Y19Q2uh+%%<;SmWR)oG]>4BW1~>endstream +endobj +31 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 2375 +>> +stream +Gatm<=]aCg&q9:V;/[V!K-JF'Qhte66Y=F[&e`X1'/.?2iZ,G`nO!$Ho9F-mD*k.gS9od(>Un:$>!?)O`/er2q1e+b28/upOj^VN,o))s3&EBbn/[4fN2X;I%;M-1PnIL>-_qCfKM`T6H:(3gPI$HKFJX+RJ+U^>-2_qpmH@@C5]<]MgN9lt2lF]7:'[p4fq"tt-*=r/qA7^H;dhMAQ"da-ENb%cnV^A9&B:T@;K9Y4cKL0N0RGi+a(_,:2R75-$`)8mZEo[`WGCoB#!R'1+.,%\h>RG"^4i5Oc=+&iLFnWCRZKjQPLMi[+RsPkoSFL>Khpj]1;&I$`f>$X6M?F5+-+dFcA978X>mZ1\AEh\6Ja&o*DEG40b[ZlCV^AkQcf@1,JZF4H0!hrs8JCKnE]/s1a.hbe9*1RZkg%rn6"1IA/D^:,nbb2KX!A=_9]H$;+s$?QA)(A_CG-e;L'i4'53/^PE#([?:C[!n9RSA@9GdmsXY5FBb/?LuGbHdDF`FL35+\ACYWg[12*/'`q5q^:4KAN75rOloV+)_D`nV]_qlV?>m\iau_AJNmSH!N3(N%_hO=e)[SkG/gS$:D-\.HJ.#NC>7O/7pG?)mI=U@B0kN+X3idVWbA.5rZTXOWMiDYUFurZ]X8KQD6,aoqo7_j1V\0JR5\4;Hq\%f\$TZGJR.%F8,_N6^;_Z,9pf\@1snG7KU_*t'5_4LBPGKIBbQ\#6o-/cS!Z;JRPB*A`8lKo4AHQ,?rAHhdMV(tkoUs:>f@liMAd[&4Y2sam^l^(7,q%8'*d&a1*GUGKU2N8\Gf`PUMm[Z[PmTD-&1&^TLtK*:$N-$BrVbWjKZ_,:=FI,A*CG>'k,aF+KWF>&m@qpX*@22#l,W;e8XGXBOV#\mjNX7^@F+GBH^rWZB-(9(Z%ubjMe,Ek(D4F[tgE=?8^l7P\mLfotVVj4;SpS/ikWH+o$KB0L_OSli_Ha`9.<6].7.j$A^Z^YWcZ,Xpq+d4<@::jt;A@s[PF+1W2]?GKNmeqAP"+Ir_mJZnKq>9,Vc[#ZJ>7<-=8ZfU[k<#X7?WSkl4$?XTs+rR',9=;kofKd*fOGaIIDZ-jit0i9N[OX>7E'e\Kk;tH4WqmoWU)1"Mm$:i.DY59kKcpH1u[&(BVEd@5):%"k8[`icQ;uem]Y8`)M>PaLC\%B4qDc2s@>I9s-!\;?SWlN$/*b],FV)_/C:-08;'].kl$.gl_*W.$UoVPU/'ES27:$.\irP.1A*GuZkq)5$N/0!cp[_8d:mrW.8U5"G~>endstream +endobj +32 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 3812 +>> +stream +Gb"/)968lH'#)\q^eJiY_0D%al,-QT;Ng^=*'<[YH\hC2E$1PtP%0[q`I$:q^)oW"_3pE1V;e"CEC?c4oF'K7YBu!;LB"d^=g`pq>a&gXEl%u_h[lC+KWHiK2s]#7ebgaM060jdWlUSZ#gJNs'fhj8ad=:NXkCL&mXfMKW%9;?V_V,+,3tPbY$YGJGXnojaN/S;HD:fGNHuG`5P6DpWk6aYW-`Q)IWf]pXa44.C6C\&lX.d1.jI1iOUQ"Pg38$p6?"loVTaJ:BY:7dEE?^NMAqZVF,2Mi",?E?-h[75Aj'6#@HR^Fh=Uoa#RiQ3ebuhH$lucj_&,5:L0U`?JAfZh9SG_\/VK\=n9+k7O49pkj"s.F'"D,6e]SSUd%MKEW6JuRf+.=V1A0W:VfuQdFNDp66&S]"Bdn:]!8PB\SgQ$)oA)35afBRfX3$kaH":4grHRpu#Je4o"C'7*15E35nl>8JAl.ngi\f0aUeTTQ*_c^"6eZKqulJ0I^n>gD3eQC;/\f44^@\hQW[XQ"M;JC/e_NXu5n!-N'O\@n*r"FSZM=jS\ci:BoG!0s"FkW5f't^a=G+)[.?CY@eH%83e#*hdM\C4'2*S0KNM)gm!,d#V@r:Zi;9ti3k;,adWOh5WnE8]`?dOQ!XQPXSa0nG$7mHpCd#<4[l(epe85&(H9N$r_V2_iW`88Co.6H8"2(*]ta8LCF\;]FBa,H!(ok)UeN;nu%p1JoPA."6ZRnh_sF'dB!!8YBWcX?mQGQ7&3>iJ'*\oopr)j_;u^$hlInfWlX->-X`$K0T9's%B^!eU7%=Fn=.@k,?K`ncDC`b]AY-?h42>e`<`SX/Ij-Sd;:l1)XEZeqsC_O9qpsR\fL"kHe0[epsW2b);(qGsPSj'9[U(Ea5/d;G`XV/:i8Ak*\+^D.X^bZG50nWh?Dj260\CGRcBQ>)Jd_[tk;`,Ke4E]H#2^g-dc1Olu/754k1%K9oq>-pnPm&V?iH)%WaCBhi_e6\ZnC3F5ennG9'+orH^%XFL.[#ontUR>@2%Bp%N8,6."VR;FS$6b&iCKeQ38KNlY!d#c1q0+`U7&q/iH4$$rM;]t7l7M(er9<97Y96FH@kH!2o?0fh.n16lhh[CmDB=qJF:?3EWU(ep1Oh61>/hLA)PMR/7R*4KbF=ASMui=*d>!>g.'%F@^t,pLYN3R1G%+F%(`E/Id1EUo@8g-B^CnXR8L]Y)=t?E7b)Zc6uG[*O'mQle=u-82]Z,L7-c1ms#$8su_b`XthR"YU")9M^d$O[UR`kF&k]U.As!@"s8ojRoka1c:tO:D6/dPsfhZ8>DJE,)XRpC?90di$P<9:^H:&F6?)'<'N[]%\?Q%>s/YY4AW(CJ]@;7MGs`@JM:kI3)([%BG3q^)UCF6idn9s>CMX(V3'?P=:sQ;*9Q#IQ]$Go#S_J>KsifNC=>OFGp.j:VIX7o$)IX[g-ENM5U6\fTE_J*ePkt-$C,1RJqN"f;Q6sH'm'O/%#d,b0ZY>7`omoGoFVH$MHKV_Q$c+^hDW4.e9\s^,o,-u_[-SG1k6(D""p9mO!/q.J@U+)ou%97?g]C88Rd8sg[r1Us\O;K1CKm[22DPMCKh0QLoT>].plB:frdnKU%j3(MX,5-Tl^4Rd7CThk*c]3E`\IXV0JSG`O1>MY9V&p&HMigBNA#gBksh&Bs='=4NrO0ESi^>X$6:JKqVfk>JekV:IVl3b5dU+\X['r%Ij]>BU>F9m2EWQCD]jKeSp/h!"C,gc:'d.)"c:4G%Tl!aiQFg^V!rqtc';HjeK6Jp([/_PTM]9PCNh)=R-0N&`mBqDbcS$L[GEh8a$*EK&idmc/ZGE.nX[=IeH\W)-BMZa(E_5=+13[*X*f8)[*5`p53(-$SsPD>ZM1kkQZV4W!-S0jF:0@*S$cY;KT??=HWd(TT9@0\+6Ssf4N1^4g_KRaXi1jC@Wpqu$Yj1dhXN'l3>/.;G1&Z4+UH,_S+>Sn5._WRD-0L#)GD*r4^M"coLTn/,iO*^nFY@Q-"5[Rc;leghj:)N?Q57d;hR=qr%=LZpgVaF#Jq3>H78iC6>fZ?rs&"9k:s)Ft0!Jg8*Y7Ge_TA$Y50k7_!GOgttDVin/)r9h_Z30*p*!UiiA3%K$$2Od9B6h7m\#jk(;"(GtDr.rn1`s0<4#8qa[Nfs$bq%6(r9WKb87l=V50b;buiU"Mig$ZpQMs%cRbKe\>P#T-GI9DVU3=S[<]^u5W3GGWu`mrtSld)b?iX=A@GIl2P=I[LZhHfMlU]7(J"bU+1*3EO4g6*iJ@uJqWd>J![/VCIUi/)nEQ=G>!?-pZWm8+ak%s-N#GEs\l5CtgcHO9]OD1C4sdjGo%Rk%Cnl,ro^g.^5mgNm+8.6$jCPtdlsfMLEI\7Rd_DFtXP-oOlcD'_`PRW_@LB17M^kr`u=9HTbD,A1F]VIWi&q#/U]=kS]ccf1(nBc7VUUWmptd51j!RgFb3l7#_0bL=hs45ldN!a?G9RZXr6Dar$$U]2WD&>o%OGgj2jcI%#qfhJ?'[s`gM;u!+j.B8b+dOZGLgIt56H+`#H%F`^2,\As]7&6&ZR5lbC1cWTsLn&QXCK=4&dROsPk%,GIq;'%ZDOYuBYJ#S"R!'ks?lY(k/>Dq&dXF+JU$SZ[\%T[Bg"bDIcb8"e8rQ)K&`ni&5ft5KqQt,E;SCu=6OcT9/^"RI<2$T((8-M1Y>JTH\D<-8pK]SB@e$TZ"`g[RgSkT=jfK,0NAAK:qG]0"?9KUOr6O^?SBOlrTCj0Bd%5[RHYrN^qe'e:tHmgp0]Jgh)BnM!4OS_\c`QC?^_/c-`O!ZO)VTjr$pamUbfo;jCr/T@WLhN)3%>`fK!;^2R>hKeh8[fc[bB2D1-o/^L.q.,:9O(o:Ys<'Hou"nt"&K44?(*11:riLmJH'N&oIZC_L,tLa&9Xdb+*FAg+*Dg#KK;4I662Z;!a?G9r__0bs2QZt"Ebj=p/)'rfg?dr8WH1!UdJil^-4=Kd8XVAjhklB/]>LM2!&b.ZcNM)O84_ej8*R5_XUTZ=%14gbG!Gs'S'nY^;'"kA&>[`qQGEfM&Ok;oJ'0tiD2HRq.hgr\j]3Dq3f~>endstream +endobj +33 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 1750 +>> +stream +Gb"/&9lo&I&A@[:m*/-LL&mAYaP9[k8^g8#3)Y(FKqdLm*Kjn,iHuXAg\UtC+=5^C1Xl'IO[^%O_!^2jhnr>'a%*Ys]H[2\72IT[#t_15&eU%8opU>7"eUD&'5\g:hTk+;iF,>P7uF2NY&U7_9^P>360u6W+]oHEKOhs:.#qb?jkHi7bP+/IEYE[Wi#nEis%dnf*6]rH!FgRFM#?_0Ks*(R]e4rR=[B_=Hh*o#nb&5"-LSjnJYD?](,nLTqT6F(;NKT>HM-2m7C^_D2,C/Qc%,Z?6M9j+F*TSc^90U3cn\!=H8AdJeNFekn_]_M5o@^\*%&Q_j<:WhP>F0!gMUm2,@>8Y^_#k2Pdjn]Cqd9$^"XHAd?G,`fHSHD4&oN%8G:MO+rJ\oIAhp?-_Kk*SH3mT[mnm[(OnIh-1^.$d9R1Vh+h,r/H8(0?a4YT$^M;DBIc@QD?5;OCG.CanBG"9J9K$<=#1AVqs+=c4F-L`ICq]3[[9KtW-(_h'8ST%naX6qoCc=4S'Tl:3aH)6>X&Elp+r#?"'W4g%@Q!#_lWRIIN]ERMsY-4u4!6g!H?M=^0Sci$u6.cHV,7N0ZhX5ZB/88s@>92MX2$7GUfuP^Tfp(@RuW93p%iI?_b>6#3,%OHOBIVlXTeY@_#];I"-qITtj8BhD;i;4MGZ!//p+QObBsN]ON(FI+YKr_QQh9B%+H^dFEb;Z&0Rs1BJqIp!?&'D9-!]i']jPIl)n_V"Q'hp;2t``@7A5=OaJE-?#;pY7ne*BR,LAO1TrPI*%l)Y!C;EsHm`"1NnRJ=8HWZT:<5UEu+].ku&djQl.u]IqGBONa^)M"X?[l-2rQ=lm.T-YSE4bOuDV9s*V%<*83cbC:&>:`j`VYRC9oo((f%YKu15+5sTDQYifE.^?b+#kSocWQk-sT&T.Dj[kUnqt:%G&o#Sn(hUqnFV8cf`[oq_Hcf?OaAGVFMoQ\T.MD!58]_]b9&-'YjhWY0khSTbt;d1.+6Q]boHK@>fKuhTK&FHC_YHu7jTR(K;NK*N@K;Mhjq2r0pRdhY`_;+p`8t\[O3]bV;q#IOCa*#D>gQcr*n#4\2UD)?3NEXi]%n=@="afRuDcsDEDs]XmY*Ubn7OLc.Gj1+@]0foJTij[19JFl"ILBgD?_,3tq60Rr)0a[C&0b4`">%)+`ko?endstream +endobj +34 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 4031 +>> +stream +Gb"/)968mu&\dj<+=G8M)^[h%&#YR?>OpK?acEj,Hq/!EeVZNi=YM#PlAg^_LMV+T?E_!phY8Fp(Q#![-r'U^ANUHfT-eeP@I-Lc\L.S98s_m60T$Mj'-;g((pVV[SZZ:*^:[q,;TA&t?efCNJ":I=p/ZZQ(Y)UCFLkoDB@"lLL/B&!Hd/94D"T;_rC"!$$fEoKuSM_n%79"a:1*i>-0+G,u#qNPa<2Eips56"b@OcXRZZ0c8@frM4)/Qno4WS>'6975;0c-G3q845FAf.RBY$%8se&<5u%&dA0q,?Cb%KJa.4PU?cNrj^PXidJpsOiE%K`KI#mCVngc$3I[4NMG*5t##;o1OS]="JhLmN@;`c#)$*o:1OMXOV-N[J2!n9>/nVa,b.K'SS5B/:YmE6L.XFM<2[#eKmm+@/Ba5Z.(NeW44$cC:oh"1iS.oa(%qE+1^`2N!#aM6'tr'@ZJh)9E'l0B^lbQ[4S7+6E`jSK*n&6uUH^rqPJaUm/@HcZ&D`1B,&^c.Ql9r#&OX=YCC_:k)hZQV"XMq_R`D=P"VYrd#5djrMrJrT`EOT\o38nbQn",)^X9iK/#?h'N_(]_i'[jAmYi-^CdTVJ/'^,Vut%p4o12j*Hp%!W=+ZpoNW,hif1+c[_U]c3!1Se(#K#cR"O(+,f=c4.7YXl1V%,%"@TT]MP=c+M`@\Y(/i;'r4:1k>?"1an3*VuT0mN`UA\e^a88]'B$2O\J9?QLgWoR71H"m]rSAcR=tg==fceIB<=#aEPO,c=\?_^IJUK,]CrdTj^\!P/nGpX1g&RnYpsPS0'eD,A*c`Z/c.SEaKd1c?[l6bS@uQt3QkLR))GLNnAs+%\+7lN.hL>6AnZNJl=2u2fE#P3XTlSN;'LaReH*q`S18sk^1ik2aplVPeCXPG6L)6SuA\71)?=fs+.;@\glF8l<&sm6@!b[_LXL^G'M<.h"DuD*-%3^cLe9ReM#QJfUO,]hP3h/b.hnV.l^]B#mZLrbI2APT4r9ufK0Gg6`Y=5]!/[3Mt.&K"'*\f9>?iXK4)H?4GcEo3L,ZLSt83])lbc!6JUTA"rX)>VkV^`(ksShl7Ck]a?U32Z`S,#%Kk./ZLlLP8-fB_H&!R$M(d!J/B.2+3XikI*P@ok;JQ.R8ggl1N0Dpt/S.t<>?^:EaXtb]@XU0cQ-Ybgb%Jn2s-O77*JVK%ANH:[2q;<9X2hmKcmr3q(aB4e.O`nR?@0OZkQ1DuXn2b30i@q/AsX/*UjP;&9L8S/(TI5-*MB:$N%M#NUdXb#8QfRV##HH2UH-mbU39u_lm'b7OdmW`ICY^,=RAje'#d./]j!IA4SC%[cNaQV,&J&=&[4hpXqmgPF@SutDZURrStu][jB_nrV@*TuS$\n(R))eG6iN7Sqq\!$#g^R_8C4qt&G+S+)cdnieuN:Ll(f?R9Zd@-E/YbsM.>+bV?_-<=m&XtNV\2GLq@`?H$@R#q8XmTIAf'MU=+6b"P3/R[t&B4l6%&B5a=fZ0";XG(1V2$gO983bRj7mXd6lL9[NP57/gr-0Q!7LB\nEJt1#;^t>.aTLG`342(CJbQ#JZ6$lEM<;15"RYDCC_Oo<"H6f%"kf*U:1l"8<_&]mK-muR5s&l*.75&Fmn^J_J4d^ETq->iY85X7GkMYk[9[3)L*pj@*M22>%_+Nl*M*[>`X[F*gOO4pgCGD!*7s-*>5Gu+=nac=/#_!]2g&HU,2^$t?^)&t$4"-Z)@M%u4lcI$OiJ8LmH?RTi@qlSDALIC"ZLNrhDq#<`,[WDJ[o$UrNdrXLKMal!)_e/[2>U1,;GCiV^S"_V,=WuaH.=&Ug?ehfn^Hd)0,>'fSYG"4[i@jMPCLRR`E^.8i5k50f+noD)$$gllgFHEu,ABL"#GKP&(J3^U'-/DGUk`T,;K;eXJ^+AfL]5N~>endstream +endobj +35 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 1377 +>> +stream +GasaobAu>s&A7Tbjq]8J&HKa*2m9nd[`XAMXj+s(((E?!;3\tRPM34t#&/ZgjOCc:&qg9>1YnF4;@pl=N5+J7k`7=/q]JF#g>7rg9[WQsrnM,CZ_nNW(L47%iuQH/0rm/*%\lme)f"j%!V,5V$Ght3Nhg0q1K:u)>m[gub?T>FD#X*G+j+'Q685J9%KG'u"2"52;5rC5O#1&l/N%m7-(/cUh3d9(F`rsCE2'1Cn>VI5"TdlEh-tI.Y'k2\-l_dR4jj]Zcie#\6Nj5\I&2n.9YeXAX7.e.A'i1.=&cn9jpr4AAPf:X(4kk-VqeXb3\O*W/@4H.c,S=*&/42cK%nIXf`;U,(t\pn;c5Fmqkc[,eUbmAn5,n]ZCHl6q$A'mN4m=X1f/]t6P:"CUr4*C3`:LJg(3*76eg"*d<#uD/i3[$IhF-YL3q/7*FXq$NUA\0E0i6tH9YRW"6_&-ST2%86(?=J%i=ELB;m!:EF4\sFObejb1&.\aF4PeBDRVkJO?On6bl9j%Z$9P0jm>&28KcPV?=gW&0=@0p4n_X3Sbh7&Fm]*j:_-TFRUj`r]2IV47I>B.moN8J#&W<[d+!fdBXWBaO+eG1J^:>9Ld08s@X)<\hf-#feN.rYdk(jk)fr@rRT!'p:`r]c-)\+`;ri(W7f?VK0TJSIRAe&BMehAP``h^TWqPR>`UsbP;HB<3[=OR"#9/\'2&^WupaekJ&_APs`NFg+5!FKotA1JCdhO[2.d\nheaiR++q55LHi3l3r^b/sVG\PJE!Q)9OOcFJ@!Bc/_Pi/`C.nBkAq(Q'0UMUtNYCUgmW"c(PY.R_82*1K'H47uHG=o=.t!">suLEGVuh2D&KrB9F3d=iR!ei]49e8$R[sATJMh@+IL:!o<`Y"hYtBFjY>3m(i?c4a^N]72hVj85U8OZ5*3kFu4N/J"_Jd(YTUF1V_XfAQ@?/.dl`)nnX&UNX`rn^S4&jSFYOLNU%rk^5?hcd00S=&OM\Q/2%U+@\C:>;9<.;[u;r'bf6SmBVJfJ6Q`-/0)c=IT&DQ,K+*Ir:hlYjUEY8ZG1*P%W%cGYqQ%86AX*,uijis2~>endstream +endobj +36 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 2537 +>> +stream +Gb"/(968iW%)2%/i$P:[fDFLsd?u$q3D&$u;^YUodY4RL%Qbj`o:`&[o`^WlOg8LID0"i6-^dM/0!N.#^^#B%_"!Jis$d=1Ws,$.&Ki>MmQihVJ]0]q]pLoWRO9.>n@Ni*#!Q)h0[J-/nF=tM4RPQ85Q[\-/qm\nlhMZOVB"3-@?J?AEUiJV#*r/5n@"3U#4QPFM@t@nTA_9UR_1I;>gCYJkOl"DnA0YT!Z&Pgi]B37GD)8q/.\90&R3(rDa+W*G0nmW&]/VRdi/2Tm=]3KA!2Fed30C#RmFiS`s!`]Q-Zgua*2<7\=%_08D:CUfh,u'7,S7T,sGqXX,iI)'$:;Gs%9t[%0p\6q&9XW-ZGp$G31J\&/_/8rRU'"I2mrPS>EHLMor-Q###>#QBlMo`MMfZqVd6Y%VJrp\$;!A(@^oOYbY;e!fe3Rho@V23.G$nQ]-j+#(=ZL1psN8MEW2iAs_-8tge96ua9Amk95gYn.dtX>#[?WW[qB/iG-m=gbPC4]^$V%I*L\#[nA^'QHuNjlKX?VhL5eA'Gda1+aBf9j*X,\1t509tCB8$%e2b8m4.X%kFQfSZG/K%sa,CP=(V0qIGd)BKdBM*nPNG1f&R'pc)RS3#4]m$(iP`Y0pchU-[G%@#=NCP-.THE+$CZ=pFVUBeIJYFMl1I!_P<^pJ7KZT`h.L`F]$OHB`p;:EdEAnndtWu<@d,W>EW%k6rUVXGmr8"U4f0HU#C;]+W%Z2,$_2-lbm`j%4*GT]l5M?G9ae;od=RPr:j0&8Z065o99ZF7Zb@>V3quUYNj"gNFUFe&Fd=30`T-::.IAauDh4b87'9meBIJa8%d8E.F=Qr:ZlOV=BpOmI7N&%/0YgDt4:SH[8`6$&a.JX;o/mb0W[Y$c4?p6k5lU;(!u00-4WB&(.u,2+AH*%89;j1aj=70s@+W^hU8If9k3!m-,F=OIC?+3fNiaD+o!ZL,46bL:-W?%Np9J#KZ_m76c>+Lb7N0B*[QOEb&'5WpbB/dS3c-O`d<-*>-NSfa6Z%Jlc`&4(j56<$t)[#oqXt,K`nB,@QfD]d4ZqIBn]OQ>f=/er46.!*h&s8'U#3k@+%h8JdQ%f?KK'Uu>o&dETK&aak<0Q5qZ>7+9TQbI34d*+p?MU4f\e_%P:2.sO,1@GSsZD(If4+S"ogcg^pf"UV,79\#.9Oli$qIqA0W0#rT_L=RbLU8>kCFA+bYEa?.a!"RG"sWn15tE6(kNde#+:>M"`4U)-sRe#@Mbc_Xc&Yp3\7U1/59ID#0\"?VE>fYe@pN9@Ci2^c`m0W:P:RsY-X?8?I$8,O1i95l1\,\d,*(2"Dj8e4Va%Oh1L78T:8/H1PKp^0\I1uDN/7ip.\!MPRj)UrpJXWk>ZWt[(iSGlSc..ZbNJFCH$C$ZF?f;CH$C4YICK8X#KhkH$7a`_n.";L.cChl.Wc;a'dAO@uZYia]BU#I[*)geUn6fW;V[RC-A.;T4VQr.g"7E2(r\F0F@CA)uDqWe%=ac*Tsg%UZs>>EpuSi#=1KsBV^/,c(b?Tgp?2pN#07iZ>^?Yg)scFuYTr0B>d72Ir`2CGZ6_UpefG0$V/hWC*BIf,t1:P,3.rb5IH$I;8OaRgd`_e?'mnPn`WE$%.V$DN^gn8C%S%Q^GIVEeT!O3ORDo)^N<>.'jp+mo7jkX\oIDsZ[>_a*]8g6;<+0'n8bUi!U7Q4LH/#A'NLDujSm!GA$J5PAWaP0@oj:j5%hO27^)j+5>0\+?k]~>endstream +endobj +37 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 919 +>> +stream +Gasan9iKe#&A@7.Cek3=<(WB,WRL)?KGN8sHk]@P>`9951q&$Qe,K9J*2D4];KnX!,AHnch7)\Z",[WTI^9+6."QT7)))QB4YT/),\QTqR6Agk)s&_p3%(uY1bq=\OORrKA"dQEm_Luh*h>)V7'&4a9d11-(m4rDP/FWDCUi>._+C-R=hmgClNU,ODtm3o>Lus^a7FrDq:b*hIB[+&+aJ`Oca+-1,fa;l&S$]27d.XZ(bPsrCBS,sp1kK:pQHJWn7u'VN%lJn0MQ%JUaUisA>G(380?-CE':g"8RAnENCZPWa,D^s(eWIeqZiB7]bT"L18uDE?%l0@qWPSH$s0V`If[od`(I9XJ5@J@&RPOqcGt5PmV+Y`?52(ZcIZ6D9u-X(&&_M%C]1n5Wn'$4=miRRDo`'s.#.P%hf`SmMKHB>=gu#F8pIZ[KL^bfNXbVAMV:DNY'[ZroB3Js-Bs;qTi>aV!?C2Obb8kDZCPruC>^u_n,l&mr^Xa9o6dLl[]G,IM#GAA%^pqPo4+^RG3l>BDX/n>#N<\h$gY*PKslZ"LVQg=I_VVPV2REqmnB)Tba/\f[#LQ_HU[A@FaKteG7O%;'t?D!M"?s#k.X;>l(TUmqc.)NG[KN:To?%>#e&NWQbHj10^Oa-`9U=3+[M=;hBrp>/)$nhtCL/GPHjc.#]`2K:e02nbY9j)ZMkr[%kj`IUs,:_/:Sih+[P+`GgG*nQZ!`C]65.?5_/\/Ifb:mU*\:j:7-cfo&^pWWT#8[Pfn*.,QU^0OaR1N^oTFr!2PH_Id>#eNGV`!s:^04T~>endstream +endobj +38 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 2734 +>> +stream +Gb"/(968iI'#*[5oU[V[7Ml+NprHmE'R?7kQ8:!iL^Ee5h:?T="BE$mhT!&)FLL8&9rG=X]OCD*qA1hp\2eld'Js9[OrGSeI"G-Tfq.PR.E+^=L%$B01Z::PV!A<,-`6o9[HAN)7b+-7-,Dt.FruuWr/-@gd;l!#E[afJDO8E?XR`0Cf]co:4;Z<7jnD3(CEpkWD@G7?&T,B!aaI-%""p<6pme%;oU-r;5\n8o"k$7'e=T9QTs_rh;DBIcTWs(lm'17dTS3XY!!<_"\W1\EJsmiC@?Su\3n!7An\f(6&;&)s-<\\@ER2a)3dL86dQHZHNpha63=4h+@]V[b_7iYp9=('k:5AP^PImIF.fIhdK5nOXNd$k,&TMbR680REHb`:.I)%aW8.n9PqW9dWrqf5Ki:"Hc6MYB?s)[`g4#h8O0j/V1)p/Z7@BpI/lfl_bFH;-GB%FeKK0V84ckE%)6)C@dT8,S2;d.9ihu!>$)E2>eI&h"^X#*JmUdWWXFNcKL&"-#Gf>^?uj`Eu3)ae:pa?2Ap26s,HY$+`$cEmV&GdiBo(sZA^j!NHc\tft"*pNkL=Z,M#W!*I\VFaXR)m!:O=re.U!7nrYbd:nE,YNESP)gd-uZ%gr1mL21::oH.:MkJH@L:^,-:L@]TpB)5(!Rf),E(Vjgf`>_\Y_,NhQ+k`:"kU;*obSS&OoZ=Oe9+4X?gL8ZcX6b\]?+t0\nlC9j!VXQ$3Jnla^nAn-4i-QB-^NmTb`teP78Hh*p[qBdVS/0S%Ke(!d]uFlHL.D]/%7:AMsP?KU2F303I#?\PRhJ`Z4XHGeAic9VSEK/)%Si*\4>K&0lT)33&r.mWGFW^P@n:\4@da&Z"KOt\5run9rcum6@^A6bijP]1C9aFkbqN',@JT6kCYo&:`MbH"7e"4'UI&[F,)YFA*b$r/[nNR./5s,;\=t\iQf\VlZmg/``escTbZR6I?'O4>8@6*Y72qI]L/DU7HFa9EN0-],&2:4=[3Ylh`?EgqZ\IG!_@pKQ86`7We^Sf9n-LlP)cmA@pUl0=e++QY@f*<;,4?lqTR]N3DM`8l:gc@)I!$2h2\rfQWK."8^.ZeK,'TF/.B`ZJaHCGU]F?5HF)7][.FjH\&c3n:@]K'ODA@pSO.F:`f4\=fb@>!_?0nVMFAS@(Ub9j)Zo;Fp?V5U:NC"1uhKDO7:gEpJaU:\#oriM_\[,piD1W!K'9UbNa%mR/97ig#<!'pVVTBrk4t=0W2!kU]9S`4Pe#V=+j6Hg_%IIod@,C?E*Eu*Q:M]X:Cu=+`9WrP,5Nq3IJ:dPkQS3GI:4\97ibI;.k9Tp\q?KQ%t>+_9?qD84<-ZSmjXga-P`Y1Ut9"eJ:uX[JQ?l8:bK"2igYDZfO3i*c"Zk0^IpC3qHqd5G(pkE^Y)J,Fhlp+dIhUH,e20J!P:[j.AauIm+-q'FpIC/9i$W[E1#[Y_/Hqd*1ceq*fXk5fm/(j^uoQq)^(bIKH)a\LB_16%O'HQK8tNK\#Xi[QIIV@:C-Ql6QF2PgJ%p#n04bjVW4k/6HOm[Y\(6E\&B\RX5dDPd"LV-bGTZQl<\TYLmoueio1BcQ/<'d9H(fI/"3.f(4:6ks3\iIo?Z%[GKUZrO11K?*"A$UNE4W00$]M6Yfc5H=Jo]1X>7p:V,&L$g,M$d!BklpYtKtjY&0Dhe2I-3;0g%.Ohe+8=9)IT;c-o^DUlYH9YVfgn8*Np:2h1%o.d6;<(+L70kD#`W>RObi":-R2U0.RGLHJ/VBQp:E1?,1``So>o,^ZRn)&_"VhJ9CiS-Q:/PUk6pXYAnPO3C>EpmCM8%-2eG\UsK,+IhL7@)LUZEU"`fIqST#[]=DbiZA-s3[!AO@,63""T3O-i~>endstream +endobj +39 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 1371 +>> +stream +GasIga`?,q&A@ZcqIV`&6NDq%WCflFf%@;gE>#NunqErKLFJ*Y\2_cF^3pom#a(,\Po#UCmXEF4^hY]upr!%0HirjjL&!"s`Z`##-A[3E)ZEF*Dpa#&]*/l76m[T-#nS[69ak?ncr<=0hu_Op4/WCIS/L7>`'Ob6kltbaq=XOrDE6]!XCH0$Y4K^":UE%ZRFDM[&WjmO*P&.'/.k9abqp8/OMY,;RF!4>NAOI9\:8WH4uiQtT)/$S*carZC@aXDV)2(uQt_hl3i:>o6^0(')TD]gQgNNLpY5m#omf##\HnAgZ-'C_&O"ZIOc2j]k]F[00@,T0j8=<,R1odJ.,gTA*A2R)W-rC%]A`I:`YTKS@"6:\r[''$])XqK?JChI)OK\#2aKT7H@ALSsT3e-,.+#I;n4q*SGPjY+ab6p8Skm6areXmKj.$bL_3QedqXp$tYN8I`+[I,!3==^KU'=0te'-l\Et8!5-G%d&t&[[UQjjX<'a*?$k3i/[Xuq"HWi#*k5-;5>a?m`K"`V,rc2.u8i2N/tF]M[Epa&0oQNXbMUD:3='>K/r`*/iK7!O]/LW:-g?L:3_#LM.qfeDS4;75B6M[Ih)%Ipg,eBnKgAP^i2)M^i:?BM;/YMd]#GBAN4u::*=),oeZulESRLgVs3\I7QAF:(XhE`l.,Nr\Qt-<%#,=U8&;'3JfBJTMLu60JF2tJ$&Lfrfm2%i3R/qS*r]BdLWn\iD/_eZrSe=RU=DnS;D=t>aoKq0F##Q<6:TasS$YVUY1k'hoQ%q!hWNaJuNXhomk\M[E2<6,[`kQXD70u1tG]rj2JBGNG09'=^]:s"V5G(+4g3-8%M=!_8UAk6#X(V5~>endstream +endobj +40 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 2392 +>> +stream +Gb"/(8U&oK'#*[5e1F;-1]i11QbIag1=,2[gNoHL0/O-]m%Ht(MgIJ.Dk@O_#u[(P-lKuO5PpjHOf497^8cbgEVp+>2dI"90Bi'J5sj#ZNeG`+>+F'p@eONeh[.PeaN7Qr8)0#ZKtcPdKPTM$4J6G'(5Q;/j=sS26mO#>q10X7@R]n-dJ;09>tZ'`gGZ[oK\o8N%DC5?dJMoh=,jBHo]52aPO>E2a\p$aQaHO?(-`].',sQ\>9<[22BE"]PNQ("Pn.eC?\gBi=6oOugDNr^kH#d@+S3PJMDbLK-r$&I1%2M;(^WSN5q]_@)3g^J[3e%O^T-lSjug+_4[.jN[is$^2%'$iVnc(.h84SS!/=1qKgQH>_2sk5+r9,fnk-j."Bb'"jn3c,;-r?XH>q@5Y.-%q6;CORYO(Sa$:lYor\7;:"6($AF"Ma2_NOD'87UVHD1sJEiOE##%XlN,!`+HBiE_plXc68u=`4nSj`&p$']Bhur4O'H/8mL,\(L-m5EG#iT/>TPLds,jFNYPN=T5gr]>iQB,(q)'@\Wn\m)%+!qKuBX@Thh+u*)=&FY;a!BK2fmJ_jj'_pO]u[#1b9TKPM7]U`Dj9_]@)@f`iUYn9s([^nL+ZrhsL%FW-QNnN@BQTj5ZaWPQ@6W+#i*[B#.jV0*<)Tk2dF^(sLG+jFr0>q,ta9\YaN+es*;fA^r%p_^l!DI9KWl@$^@";oBGR;jFh/f$HIW%H5hXXOEuFoIH\Xe`KT7cEjl^EN9=TF5nmY'o-`9*s)A8cH=!ReSV5SXt8!*_?.r\iF>23SBEa;r9YI1X21_@-,cu(Fj]-(1hg_u^?YpfW";qGE4Tb.hYb'q&#EEo_LM98E-?;Sj=E(@s-r6!GBE''.MVPt-orP7.>tfSfiEn?krO7e>9s-MZ_*+;Amf4UiPZpu2024F&fp&/@S2Ht<'LR2a.h*P(,ISeHA(>]dg@qV:i6gTb+o%-H(uXUKe+!+E&l&d11AASW6%U8Hg/br!p0TX@8'F[@")b.flIe-)n^2HkIK'K*FEPX-4G"mQXI-PCt:`rq\h\E3C5DC:dddI0h#,:/*n'ZZISub\!ZCRO=_.V[Aj298rE8t]Pk-I$\K@6d$&YmFsHl.%@b:e\TVT*b0K6aQe^+n:.F2TMn2gHep0Y2P$9sR3GP@[dYZV3:(0hF7ZUsus*A-Ab?sJ-WO/Oo;$M'0%l$jOk-jYC_!"Blfc@m-WJ/b:=TPm2mCMJCd>Yp?9r8;.CBNW297I9If[=9Nmn/iNR?2FdN3^?r9`AFaD=VG1TI`5<^:89Sjq5=D[Jgq8*Ndq1f'rio\1-/:"`b\!od`'KTsH@UC<@:$:1ZCNfRLVTj0Eds#W=H#BgBbNGRg\=VCCY\`P%?oG[Eb?T7!^XkJ"DN5sgPiqmW8.jOE9^=d/%O<&>_W+it.U2gP4b>GQ=Lj%6rP*:.\NjDmP5$h>hEgC1Yrh'?rmR'_3d<:fjhKbGe1aG)c<-F0WD7m`R*WV_":TPa05b%qi(Ahd9[(r!N(8C$T'_K+`Q8ASG/q3].pDNS7Dn313h/M#Q_@:#u99h*8*A[AO70YP\:R6l&TA?A2P*5l[a#e#5d_8";)#]ohDsYjMIkO$ZeC*]5T6rm]~>endstream +endobj +41 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 2837 +>> +stream +Gatm<968iI'#*[5oOZ1fXGm3&^dkE5[N%;&AiDM;ClM6$ckM]uTh'kJ:GR_'p?`&UOL-:VR7]K%7'N:*)VpAg_!t4QcX[.IHjNS%"UGFX2$h/8/76;Qjm:0lHP=bad&f)g$FprR$^BdNLu5oR\.@[+@M#)PaWm[Z#XO3h;nhg2\UjSIr:TkC]U(C(QVG%HJH'@_eaU_/L#;G_;q@h!MoFAgU88;ELE/W\C\a.6Uc7*d'V'j;P*+Te:MXjpK+B2$3MZQ-?5*m"]dN$@Bf>egQN(G[#*I^bWZp$<].dd-UFNL3M"^c\AhbD>kl2N5>R?+2p_V0#PGBamO2rDqV0[G:46,JX1f)I(Hs`u'b\kcSXt%oJohN`Y(jrqQ2-ROc1PkKn6Ln=Z022dR;:`[GMcGnCcm5QY&t0fK7@MgiRU?&6Z(kj[oK10sj_ks]Vg^@oI#iXJjg&R@WSWdYcUb)S>I:0N^*r:]WD:gcPQJ-GB_8Nl&C1&aT[CHo+8G#8Tp-bD&"E,dW"i63o3!29E`/p^WJB9!9n9\M^"Ya:!S*S0YpMX2aCF/'-=Hjjos`:=?:pa_^o+6:HB@@^F\pRj1'C]3IuOY.$C5Wm"L>pecj&T_gM@p===#iP:6?c05.BhGTfBb";4#kR-0/a">k6@/!aH#9Z(_;%%-kO,5\FeLTr"aL!6fi-6.1bo!CPh_0_K6H(P^VT'2Yj@5^abFIq"gSr7BrP\$!E/JgW2'fn`igse49qU,'om"@smhkk(bk5kEcA'i+)26kSFr@R&T-D6Y7fMQ!!"G/n7-(eO[PO=u@YMN:lNT-@b@c8s>aSq$OU1aWWTcFa?`S%%P*bFqZ-t9(So0;Yl5>@MMO1Fhfeg"BTFE+?AVSD3ibtl6mW^-@Q&1nnhX&_KTjHIuKlnLkJ.s\%Io?HV9p;pY$pTf*3S+5B_77:dh:)U[M2A-%gJI_E`VK2!="fTTRTP0SLn`!b;PusT)`YC]DGSms&Kr6Q\=eR0?E[:D@S0%AnXCb-T^`g/_R:(^QKChMYk^<]i.T4i$338Fc`d=3_PZs]%3*]5gD&0]DVp^+p7ou1oM2*Pi'r0c*0E*5Ar<(u5?jI<_a0W8pnV<3c06M8$MU/2f&U%uO_72BR.,RVr0Lo%gQII)5,HT4rWV:,1#"b'c-0&[-41iFn"QerrTb;L'5R$Vh8C,0S,^J-T,q_o]WRZA7<12K&[t636uEGO^#bGhI\1pSpQ.pID9#'CRNq)JlBnMWl\Sje*>,iiT#_Yd&Wp:5M3+Wp0f%NIgbW3n$QI&Qj;oX9mgf$W$Eq+V6HcWZfh:6PhR5F8J6--PIB*60W_c[lZ+3_KCTmV;5V$FRPtT4VD%&Tr"F:/#Ckg]`-#Ef->'!!M7"rO1j%*d"/I7c->+u;3K\ch4D3YbqJCI4/J[E%Tc(+&*7]fYXF:q!%Riq"LqX;gI#>dTjgXY-RM5*g-@\Hfa1@CaW![$;8j5pbPG3ncl+XU:DdoiHg`lZ_>^Nir\jT.,BntHDd^eed^CPm.+DQIKnG4S,u^6;kTr4i'g+3F;LmU,*:OXb0E,\M\3,AB!\UY[nOdg]'"tb)HPK[d`s^`SZfjZ]mCCjZ)rCke*"D/;`QbDs,S\ie*CF$>HnE"3@%SJ(@=:Om"@@TIu[/78qpUZ/O<*Vq2`'i'39A$@A;VP>p_0r8DJ>H^47[4.9g9F1'%+;k7>jg%]J5Q"Cj<%^Wroe@(A,@Yn<(C7n4!:N'oj?1U%*K\'><=?@Dtq-IFe@@7N&^Xg\!6r3X?Sf-QE8B=joe#_n-0/,*G$Eb.fQFfo,g<9+[;'fq2!KPikJIVQ)VsS[LDrU[fK<-u^is^Y$XmjhL[$kqu!Z=494/&8gj>Rkk:N*D>a)g'"R'_ER"5Fr$4/,_ubOJ['(`*n;>K))h$]C'crkTrB`rpK!VoAofendstream +endobj +42 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 3552 +>> +stream +Gb"/)96].#(#J7X@+,d%)C'J<"PM6V;Q#_ea-lHCWk7eUU#:SQ--@Lpb\ZFNpB*s<+=106le0P)K+`EKEH+4u-c?>/+7B-Sf7a'E8R?nm#o@,t96`iLZFhH4>;#=Zr>TT\,^u9'Bu4CQW/_Qb'0P;GZ^B77m0)9e(G)CTn:ZUNas`9ZZSu+hCO>`(Xfl4_q$u6JuRgmr)=4DT=_MbT/NOG>)/`<.pJ0NLX9d_(LRE6^cnPGSP%q196<[C[Ll.>sTB-B>eWSX'^f/RAJ38D6ka4WchoYjE7m/;Jcgg(G?ae6Y_8*D:T1XA8^A\@[!(#:0uHGY%Yoq7)cScnuO^\\iZZ^%!l+QE?%7j>!2137/f/6:-".m%Nk9qAt?Kg9I)YN"a!@*U*D/lFlj$AdKDm)p6c3NACrGPbjc=/!WPTa-'a=-pu>"6=VBIB;8Tqd+_ee])Y7secd*DVN3`d3G\WY*A#V>aP^'X,pP\iIrCB,0ji>Mt?eg^IOY%MRbnk11X2Gf=d=2E-huad&(:W0Q.+G)4N`2J8fKMBm]V"t)<+r-A6m11Y+H+d4=-/#XhB(&F^/5H?;DY1KpcXuR7Y7=S$jqic]m>Jr-34AOC?,q&Ip@5bW7%&Ia9!IsG^>1fqq)Q.PWR5T;t+ht,Z3ThAJWW^MFnUT):J@99A@L(Kgbu=4@1;TbGPgnM'iA68nS\a#q2!nP>kH'OunWZl6A$.TU%>+BCc1[BLn+NTo1mYU-NkaON%ju\"R*7AI5fbV5-F'EZB-]rBHt<9N01JRf_e6:FT5HqZ(t]2#GpP('4-#`DaVIAf-'E7ILCli-X/XHr'Wui*.jsBJ*rUa+qM*e5Pks-\:`q&V?XN86>S-Jfj`t@L0\K&20GZY8ILKq@N?&LCj?S_ipdTn]=N7U"=_<3JW'V%A=kWT+h&\VCG%j2MGHXJUX8`6Ecsb^%Q0KLL*@[S:g@<5qd2m3"lthKbVl891/'"LoJu'&GD\aJA#Uc<:Ea";%[RaJe*)K^P_44HeJII:]$+/$NY1HoGmcRKpS^/Jfd,^I(tX@I*(;mRHDg$^4s['Q(3@8mt1$a"[A.!,pil4+'=3S%kO:\^5aUJ`Y7i?:(Kd@:E+mMcoriPcuuGA4Q=O/i"+=9nE&-7+1;c5+1(.J>tT?WCd,dC6>).2-OsLX=QW5V"1W[n!UcPu;fRRnBrn*;EL05\@edMpm[c>Ph:"P4mLffFd6-!<_lsZi;q,Hu[P!rVMmsBKnj=="M.DFlTt3L^KQU&BZ<,Z=blt+tWl^1)FLCS4$A$kgj0"''o);XfF-0]@gM&^\qXJUCpi'(^R4kT/*iWV5<*a2K/\B/3=LE*B;9DI7Q7Z2!m*[_$.!0:7@9$8WHnm:qX3Je')Ro=XG6,p"dMkKSAEln?(AFu(q)Og6"]Ck#;]@r@Jmr#4$>FX*4NC`$4Vie9Z0Gk]N5Y[07X57,X6\'d[`3qM%X%W=`<"*2u66q!0f@6`OjDPWBS8AI\&9tI6TP=]P[e]O9nJ.tocV>9s1Db[RN/]bH.A#V7CBZX4p1H22WG:AI]E#p>31$F?e@?gn(%)*.p'5B_nubkntch$e"H6er\]7S=bp\BcGsq%-C`ZjqVT(Bl_u(g_ai'h""SNqh2PgiR7U/+4Y/AgP1?1AY]oUmM"p]^=X0:9Y&.HmY"d@fp9-(0f3NI,H]d"79q-P\b+^W`,>;1W^rnU5m=diu`MU=d;k%$Kc@?Y8:cG08K#^grVYVoiC,8d'G/4?9]qD#;8,W:X$]b(@\Y`$H"](5G7m'*)1U'T.m*2a!8+KM.5?9E7idQiGCtZ=um=P62[L;LNq@XL7;qaK%mYE-'V0Z7Y!%SB57e\+IpK>-k+,lfrNN*_:G3O!qPj-I'kK]lf`;d>q(oTb,hZ6C6:sK,hl0CqpC32;>-"JtfI3%PDjCSAAF*.B7V,d&uJLWedpbbVjgM]d'Fpk>`Xd8LiQ(5^./Z!UWH'j7R/2T0=rb\?"(#@W:,I=p@*/EB7JMeXV2p">mN8a@bB6eBdl4p-6i`FAG$EpI!d7GuBib"n"5-n-7/77RrP[i%U3>HW#J$$rY]-'?QKTEpoZQM`Ju^iPHmQ;\%EV?57`)9OWs1fFrbYSqO!7<4O7`8J"e8lVkD$VBEXn*6F5b)s,=MB:(='oI9E^SC/SUjm7&f'E\-O)>'oE/D&X.g_]Zo5T@f.Y;%)lnqB$ml7oUj:g:/dm!b82Ld&$;4GtRVfk4s^YFGJL"qKK%5IJX5G\I2f:CK)c(:C\p[]OgXk!u!?HOmmEQh1Pr[;M7k_/d^CVh1?ONWKra3LXH-$[5+X`h,&*o",l8e,#EJK@3;lt2hX,c.jkmAc0UkuGF:YYKnKoM"`]VW[;aR3eC`r;",9Rm<`h(8,Jq1q'F[R\,8:0'\i;UnnE1Zb@VBte?-:D-)-]A!+0gd+c~>endstream +endobj +43 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 1357 +>> +stream +Gb"/%9lK&M&A@sBbUq*a@7X"TW!-@42qcFka>V_kaN55e@2p'ZE:i,6cgN))bB?'Q+4?_fgQF:cB&3sR)ic&$O7:c&+Sn3qPHTRkUtInfOG,O'TJ*Xnj(*BI]*EYhZRF3`8;P6YiebZ<$=b,S]l5W\_7Sb7;c7:lRK[+67PlW/3r=$hl'ga4`cU(j4%&eOVJ5:aH(s3=Q)Rtde(O!UfkJ4d.U=WC!7P66Y@0h*($fc6l<5cUg\X6:N^rSk6eNQjYB7"e$m"pnKF=lcB[eA0!aplaJ(S6kUfE,p"iSpYfX"L`e&,Y#7D5%]@Z>4o$R)E*meUME?fcm*krOR]\QUbe&Uq[E35p.&Hj7C,2:A\5l8/Q/doaTZR2j#Rq_!!"HOf-17oY0;1to@fn$ea/0h7VK`e):uNcrYH"b&Xu'+j!cpQM%rAL-GA3IRIlf^gG,^V#.B0:=m.V1Kro/pCR9qk_s+""X:X9Ns<8lLAJ>7N;fOBhj#)%SPa9Lu4nXU;FD&N>T0YIGK%;p[)rmE^O((;Yk4)HEas$,Jj-0(4HAk4((AU?h77*m-aLU:AI%h3*1=XBN5l0>t1;&W_-C\`HUI/fcTrl[Ipo!U:Gb%u(U^ZgQQkK'(3h16d>jC__<`5IePQ@[[Yb,qopcMRbapB=[e:])G-l-a+EEEW!6Ki@BhjTV('fp:1u+'Dl\Q%*iRq\f%R@="m$4RXtCm!<2!lZU8XVM,:]oeD#jRW[oYNYXBj'??cd[>q.Rendstream +endobj +44 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 2861 +>> +stream +Gb"/(968iI'#*[5i+?QC5ld#)@qoe[*%.?%QEud1egFg<)KLq98=9u_Fq=E9q_^o2PV$*3t?:W>:c0NH,pbfm-S8*59&ItoHNgE*i4]!;T@`nM_r7+$=a[QqMkjB^g2e]CF'Xk&fu^'(pV&;bnk#ZB:mkb;DJ'NZaY\J[l$n'hO/DTc7g-L@#M4)nI$@%3C>;f/(/D2N/cn-K$RAl6V*]$;T9;3S^a9\RrQ^PSa-?":GAq&4D.YUo\,,GfCf$j03!$Pk$(#9FP+nAKN3Q(G^u`hM;4>]b)/TiCVfHlQ,1qEQ">cnYSlt#n%(\+p.dTo1QtrH7_pcDcPY;7Fp1m]RI]<2MGRTe(U,=Q>Hm68qc\+R0k6VqB\)"nC.Er&?EI8Rk;RNr>CP5P;4,5uZ21^2%"/85c4S/0J[1?MpBHq9nm9!SjH,6(.S<5A!E6!`X-B2('U$`pB1d4sAO=q%,B5uUR_Vf('M8aJ#7gor:dKOT]qGkWP)KJXCa&U*k,FSCW%C]ZIBEup3I/\j?9[tbLkf[Ua!pVM,S0c^r-9=b\kspfo9+GqO7g\/b?nX,qWU0$9J2mX"0RBI3q8.s1.^IX.]u5n_1P_:jKtXElX@j6@4e,@%q$ugA%g(c]IK9ADY3^nGCLkD$WF?2KnqrTT:VW6GOcHi+47DZHs9AMHg+7`@ZngHQu%=LQ;X9n5(JYH.=3QPC=o_F'1'Y>U0\:Tm'FBh\X1hAb=V]?_JK2hFg+ZXXep15/,L[4.Hsa!]JY,Fqs_WPPZlfsLR*(J)]5MmI01pdb'N^`dX76dueFb)Hb8,<6CEg[Gh2FY3K_[d3_E*V59F+&2R:L#E#8,JaFRhe1n\XIZ*RXmrZ,X55P\+ph=5T6)"Cn;C=oQ@"$r/s3@?).!t]t1V@LLd=0YK9LagOMm&>dZ[I.UCOG7:'E%atd-FX.*!X"\A$jl/[e1lsodtfAJlf[NGW9rE3WV:(Rf!UkYcJQ`Bk^\!=M@)]FPa-E%0EZ\==%>e$KfC^5s6lsP^T4BL\>rrig?bB'rk]uhQhbm:hpX$pfTo%Gp0$5r;CMqLdY`%PX]B+ge/'2Ro[S9$09pC7\qRoN0/u%;A\646:CEN(UM6gQ)7_>U@jHA9MN-NEO6i!G$8EN(dr]>J#YDtfGd$mHj_@u'.#2:+6K?;8LoUDXf/a!dZ.NtRcio=n.(?!SJ6Hp[As>>D<7C_)@dTm9AU*%&k@_VU^IL3?"#ElH/G#5FFmr<5^;$.?OUJfQ*-PjBsIc+9a8%nSp\qV3ZhQ6ta#gob2R\n\;>5O4l1h9-$ZL?J/ZrFTc-\sCI=Vp#d/Pmf&A\<41H=N&)+_([\BFSXHo.MHRkBTgJ.")$abFBbDasJ>^J$*Yp+c`$>U(*X$?>=9Hf(h&:"g0JV!c=>BD;n(=T%.f>]F,#:o[)Tg"^jL$pC3JBU[]:["gj)3!QGF1%lHcC:rjTkZV+@D4r.I'b$/5?kdIE.G^rQ5K0aiVr,UZOL\D@GF`Aj&H2:5Ell*"l8_[(O(#amR>^b5Sid+&6`iV\lTtS%^r#`%lQ9`;1I1__iXhuE^EZ&ErU.FK6T#gQf[65Q)GGdDr?\Kf*\C.sYZ!j/Vc[%A($D)fUsG@7hendstream +endobj +45 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 2890 +>> +stream +Gat=-gN)%.&q/A5oNRP/)[=+Tf$7=@aQqOGjD&K/j;48ZD,*s(_M]f;q`PCGi5O8$]B.ZX61dJ'F>qS&;'b\,bhlr,o]qeqXqWohf*r$&N._N.%J6mMicP>R-3h[QAWeKYI#,J'2'n?`NoLVe%Zf;J#-f%XQgs)LJN=pO\(S*a+j^F$'%qH*NQhA+@NeYEpcDU'moh5nrm@nJ4q9A;[Eq\(VI>/Sh9<^uM!NFsQuBYK;0kiN.f6+\-E)Y4//rI"WDU=K_74U)GNp@&:5[>`?!CW]fB68'Tto^EO`q59jfV4hT[4]%@,,!)kC*JlQaUjE+/_T=ngG7n;hSdIe$_[Ar_^$'rK:T:R^3sdTDcbPLhDSM>N+A^rkVoDgCi_Aq_N?Q;a#32Dh,<'0-VgsR:e0@bR&BTUo$\4!j/&!5%rqIdB*bQ66tgtc?>0'[cEhq&2">BtYMi24d"4HJH!Gnjb4p4ae!+=ahZ0`MQcu9nB7P"&PnirUj2Ips/(j-;#NtM,d!kk:\HIS)YWsi7\8e%S=7fU+3Cp_c-TDm1o-CB"2J\s7DNWqSjTem@)IP]o)l4r7BEGX'4>Z\Ldjf^cE&KjiH$rPVmB3QgX`58<]oFgM]a11?1J[\dHMS)j%cZ5,Hn$5tA+=!nlTpcm>bB`>7d$_-NJh-2B!p+4I)9^I(26:(sEXL]Tb8GC;;!TZrjp`8Tk764>8Q5b[LfdPmp,5TDA4H?p,[+ntf]Hhs/km?/uYf2S9qQ>eAId8b'DG57u5R4+_T*(1q;\6W:fEKe7.pMo`2`PJtc#!+=QN4LIm6[MKGN*1@E;0-WC`,u\G7^PMP@GtGn2nFl?ker:QWl\/9D99^P`iR4s`&2_\=sd$"TBJ?`@0pg@S:s%6,j##%f&2LYZPlD\SoU:("?IcHCX-h8(_2S-BK99N#m0*$p"Rpf2eVVI$J#35n:3[]+u.#AS4jS#5F&`KAIrue(L.Z._L_,b7+m0&jKN#/(s0D_ha-&bii+q@%^u40@=7X-[rhn)X?-g?2K:doK>j<.U"PV6kO&c93FoV$6eZ(q&nIq1O>,3bQ,;n3kjD/J-chn'H+6D0"[oaX!4''u`RX!GUC=k9FdWE=W6XLk9L#:km[o5"MHefDH%Qg>3H\b7`&W[L!3/VbDJD3-gc4JdE3V0cZY-PGSVp4\QUlT+f,aD!ZU2!bZE8[;Y8"%KRrH/DaLJFkKg:9_i6[s2!.8eR/PBYY[cIklFU0lXdfgCqXjqD=>qZ_]h002h:[S:m^2!\*I,;dA03.^^78p?3h@#qMWA=JqKo>l&TJm.'1AX]kAq0Va,/u"&'B$ZCRRjGH`B>fPoKKbC[&+on6d*o#8cR,Bh`@$3?B[;@Dp;9.m'WdRZd-&Hp$NtjXS2J&$'g!EG&@\,KZUE*QqN-EB>KP=?3IOXQ6$TNX%(J^PjL1b^Wf9X01obHA3d[0P@>F1q>r"VRLAT)BSI7079a)O"j",.G[;.TnLA<%TnQu2,)GYE4*_J)i]+e#QSI6#F9[l&PFdtnll1n(8dud3[]8!]W_OCc&l+T'X2s$W,2!Ptoe/#57-hK?=e."QZ55"\P\=V_jJ(m2%r?6#mcK@],aHqp=]e8W!\Js`,"6:Bp?2]2$?^f/%Mi1)Q0a6Z%QZI@h\U_`fA]bKfD,cefj0=Di',RF<6*`O2eg8ON1uh%DZF?81T_nMh"W3T]5UspXDZk#fe3(!Za6CX4-j3`-Q)G2ab\ZN(X3-e+P/IsD!7XEH_cXfo$Un3l^)]&QZ*:l(QBitt)==o9T_nQK8+Xa\=;%IS9?E##lQ-6IL\/RcLjW@QlG%-1fKf~>endstream +endobj +46 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 2602 +>> +stream +Gat=-gMZ%2&q0LU'X1\uHT#;'8u/9!!/$6:I@3i+dN-6@!e+"iEhXFWgq%%-pL1gbMj-V,mW`7]\_*WOZ&5HX,'h+WiXaNj4j_Ah[Ruhd/O_RWB"r1s%'Kr2o"ZL:?\SGaCY8AK@+VZadYN[&Elk0a?dTK&n)Yr)(#6HjGb[d_Hn#G\2V4GS4uS@^L^0Qm^F^Nr%4o)%lAi/-d><6p/8)"p&^+argfFpdFo@hmB6L0`-ZroY)X?Xb7fJO9'BY[gDY0GMI>.irN$W\_&-^Je%J=292sNG.ArDc7"7_;]Pb(-HO:eahosDL@Xk"">3-C*SElS7`F;p^DV:!HcX!f!V(SSUYYEGm[eGc=l>\K@_*Ee&Ea&Vpo/T>IXmrs,K,F-ou%JXKZ*Odi8]q!K))-sSmmMI_CnVB$,QnT9aNP'K.O0o1+)LP5[?3(W;Cf-0;&du$?;B1RBnElYY;($:5W9YG%HVV6L:DaSr5^lUH1:A;XG6j+=t`[B`cn#'#f(hf<*4qFhOiE1kpd>Um+PO07AE,?k/;<)o*GKE:,gGE0"rk&06&',>I/&_jnekQ6:H&-][\PkAY"o';,($>]P[SX!Sh5p.+IVrUb&a&Kric!KPX[L6J:"NBrmfrT*O`"!0G?nV)J&K98BY1S$o>]KT=Hlif9M_UXqds5hsOK2+.mG@=I;YrL[5@D=2KI">W,(S@)p;KYM$Xph=mV,Bn\X>eI[=+t/0h154==,BVk]FQU,d?$oC]aGRLPRgl2lhuM=Xo;X7`MBY3gaXMe71SX5VbBqED"7!h%XVYgXCek'#*KOmS#Ub\Kc!RU#4tlZJ+-inRtD9q4S+Lhu*]o#3aeG^tj@$AVCg4p!BpVQ;GGUl:bXS35i%A*'PMK@mF#h0f16(f):DMi,EC@akU_Br`;b\uEmgWLXWIhEd@9Mc=[@p3EV6rnC?&9H+q(RDce^[mp-nfVdk#*MYr#4$/BXTsBQ*G.T`moo4[Y!&t]PT%&@df8jB\A6Y+#Do!RStRC'!FGG&#,O>G%AMdfrl_tqe-B3G?l-;`!5mO4if#r(3okck5-lj)EZl)]DB%Wcjc%(*L_ZodN4ilh$(bQSH3-Dn1bMY`[-0O3K:]#9;bCkRGklQ[D42&Y%Is*i^H*PiMm:;miQNn*21pidph[=R;$.D-Ns)DeVS#3n.alf!)0lGdhHjW?;4'LKOrlcR;m,ukg1n%]LF\rOI1efU.WF^'Ddr:GpUeZS>IJQ>S_%$Z?!m4btBJ:4LC]NEcfB#>YChU`FGTM$?H6$,Q]!OXi#s;q)#.?BoO'2dc7sq[7=R[RI@IpAMBD@ai-kin#?:p&%\%PR?A0cBH[sW;[X")'L\Ll7KmA"k*"+nm$Bc1:6p#(RMYjdB=aoB"Ld%KVh^.g^QY?QDq2_BdKJa^4"b/?Ze1:E]rj/PYWX'OFYmE7;KiSAFRlRDjNN~>endstream +endobj +xref +0 47 +0000000000 65535 f +0000000061 00000 n +0000000143 00000 n +0000000250 00000 n +0000000362 00000 n +0000000477 00000 n +0000000682 00000 n +0000000887 00000 n +0000001092 00000 n +0000001202 00000 n +0000001279 00000 n +0000001363 00000 n +0000001569 00000 n +0000001775 00000 n +0000001981 00000 n +0000002187 00000 n +0000002393 00000 n +0000002599 00000 n +0000002805 00000 n +0000003011 00000 n +0000003217 00000 n +0000003423 00000 n +0000003629 00000 n +0000003835 00000 n +0000004041 00000 n +0000004247 00000 n +0000004453 00000 n +0000004523 00000 n +0000004804 00000 n +0000004985 00000 n +0000008077 00000 n +0000009008 00000 n +0000011475 00000 n +0000015379 00000 n +0000017221 00000 n +0000021344 00000 n +0000022813 00000 n +0000025442 00000 n +0000026452 00000 n +0000029278 00000 n +0000030741 00000 n +0000033225 00000 n +0000036154 00000 n +0000039798 00000 n +0000041247 00000 n +0000044200 00000 n +0000047182 00000 n +trailer +<< +/ID +[<4f4526d99bc685e2db358b741e4cef27><4f4526d99bc685e2db358b741e4cef27>] +% ReportLab generated PDF document -- digest (opensource) + +/Info 27 0 R +/Root 26 0 R +/Size 47 +>> +startxref +49876 +%%EOF diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_hex_inverter_pcb_prototype_p1_rev2/guide_test_hex_inverter_v2.pdf b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_hex_inverter_pcb_prototype_p1_rev2/guide_test_hex_inverter_v2.pdf new file mode 100644 index 0000000..d6357ec --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_hex_inverter_pcb_prototype_p1_rev2/guide_test_hex_inverter_v2.pdf @@ -0,0 +1,360 @@ +%PDF-1.4 +% ReportLab Generated PDF document (opensource) +1 0 obj +<< +/F1 2 0 R /F2 3 0 R /F3 6 0 R /F4 7 0 R /F5 11 0 R +>> +endobj +2 0 obj +<< +/BaseFont /Helvetica /Encoding /WinAnsiEncoding /Name /F1 /Subtype /Type1 /Type /Font +>> +endobj +3 0 obj +<< +/BaseFont /Helvetica-Bold /Encoding /WinAnsiEncoding /Name /F2 /Subtype /Type1 /Type /Font +>> +endobj +4 0 obj +<< +/BitsPerComponent 8 /ColorSpace /DeviceRGB /Filter [ /ASCII85Decode /FlateDecode ] /Height 837 /Length 43695 /SMask 5 0 R + /Subtype /Image /Type /XObject /Width 636 +>> +stream +Gb"-6cg,MiH08=G$h'#j?7Pm[ZK6lQH#-G8]T.pT$W2=J2Gg97&T6ff$U(CCun+iJPnf@WG,N$!MZtg7F4e@?5Q8P:5P_p8&J08R-r'X;4(%5)>T9h%Y>-&;g445V2@@,iPT%OJ(YT%#"E6!17\Nn?d_U_lATT[00U+/ZqtL-fIu^Se9>oGS^@p)iM(8@'J,YC7`>EN]>;5nI["n3nNVbTgh-55Yh`:!F8fS/gZm`Z_-9R+&+;UPE!n/aJGJF;_b`gW6pFc0lT'kCp]t/^F%F&]fPQ7o#+_(Z?\o(M!^>PS0cERC@QLjq;!B#*X>j3LS"+h7]cqJ.VEs0)aB/kLp`.aUhQ!E8PN-dL6el+(mXTiWD/#QH\+YQlt_S^YYh6cMUrIG+8jD1;As`HW(^\+i(Y,?\o=NdfQ?MJ#,Y\eQjmi'ZtV;h9O8V>+G3ScV.1KF2ejkIeuuYNSKd1#%nS4:4%aJ:6,#\]fAh3(&&S+1FC']Z0%YUfpdtWH*W[Wah2R'$b?)TlADm$pZ%VDXO]u5Ypk92'KG+;M;&TpN!F!)tZ?2`?^cbkZ_p-c37T_F>u3VVpGep3M];l`':tnU_V"J&hR^Zqi\t3tp#=f>JdIKdONV!cTal>B?le3GUZqe/=mVf5'0;0&'024*$0''03j(-7@NVSJB9EVn\rI3#@+I3Q/Iu`KYb;S+#EI,0dZO1'(DTS9dgZfC6Tq=o6hYasg`3H'"AKM2J$c(?[kZeFXEs^f/HG.`IjP8NgOF66^1T0FCjEAKo,0s$bc37TkNcf7"cF1jH\GlLUiu/T_9*=D\LRuGi1d[A*]j]5Dh.)db$I5F(sQ;!;9uJkB>NUW,X73pN?I1"P&j>3+jioY1QpqqT5YAKpcY7&MDe$kWlB/1'%3WUN:LKcZ(SND:"*9/uR=T*HShs&:H,k>AdC&4C4Q\Gb9%LGe^UFn-4uT>Z\$76NgC%j=-:Ye)ug>X5pI1rm83.S\oCg7>lR1FU_PCHFO=u(WVup((:(I#0!U9M1ZsUqF2!))o:*=)j9!]LVTs=,5%fadY4cHc)uWFbShkZkNr'hVD&)Gl2^mCj%@*f]l]1*HJuo)=+PE)ChPIp\nQ*P`Zq@R>l_G9k9=^Yg<7nNe)(44dh%:q_&N`#c);p9Fg)J9CslAma`@MuDr/Hp/pS79KYW!:9ha#FrD!n5G3f/m&Uj$U=mm3g[C*]T0e\9)b@-?C!hmTNqOig"3ccM%g?l'Acd\kCiQ7"F:+9!`6fTkC36s00f3hq8SUD]8ePplL%QY!RC@*@mL0EJT_'%Ed@/[iIhS]=^a)=cFlCeS88-C#C<:pigb-m,kU&fd/D^[V#>MA]fUZ5i&nJ?G$"4;aGE$L$S9XW!$(,P[bU18`;DXJYH`h"cfq&FeeW89SFYkhdn,AU)8G2AcB]+roDCqlD4Z:R5e@$OZF+al]3@;Y$rfciPP?XuNj3bAfeIL"64;D.e1U@jE^G,MJIt/Z!77ZaDQFJ2JEV'CaLT-29@XnMP5aH`4Qjp`jd\;tPkn%6?QPR`"nR:g!?g%K\UN!_DMuKBZ3lLS-gGdQ[)!RW5NOM>H`a)AK,:NWH'3)[PI$Nqmt,Hmk)pi`\8\TiTNqPl$S$,+1MfF#H9Acn5;i%WQAoR>R?>KNR9pPH@JNTX3R[3Q5qa$3egu6^M_tOa^o()<+$bBgB91`2IZngb^7%Sh$RkL,S)72$O5M$49g,:'[Y[OOSS3_Ygicr:Sg.$Ok7tm`R4AJodES>lYjMQ=OOS^;simF,@B)[u4s"%/P*:dc5fPS[u9Bc8jJc5AiKl^lZ`\2=,?.R(!CU"i)m+Z/oE\:4!QSofIqS-]abol1QcW4#(\W[C0pLRoWG.A4_gB?mF@!6^2dH"Q,.S*TX\_!VH_(AmXeN#SQoToL8gQN!RXQ$NA\(r_8Dro,JI(&,%O!(q6cRC?[q4V'op2t9@F'#45#7sm$;6?Fk]/XHHeU'[sMBYaW#,_g1M#Y>2?WK(?Zc5WJg4m)SmHAP3rfIr)$/,QMJK:W1U1.O&!%7416N$*EH\W94[Umc)JBqWMH8p:N<3Pq#_%gerJp6Q%mqaqLj$]9P>64`_>R(YJ7>>6O[C:kZ&tK&eoKNnFG?PDB#f41et?W\4t=&3/9-P1%K$cB+iKYYb>-d'MI7)K\RI?IDYTHCS4sP%+>trmWCNL(Vti4APt&oc4,g(qk&^$djHTBE%V,G+\!L06>t=H>I&Z3R24s(BG[TOc36H[e]s/.>NAC#%We.UTO"3,3#;R_e2]J@D`knIbgDC"abP%j9&NqSA4"VF9no25Wh!Am;RkPn#205!JTCjR8_rae>Na;%.+IHc"76/49U=Vt,rbnWQU/on=832)(1$?5"76.qZnKF$b06\/!SEa/F"t)65"1T@&M2t:2m`m[Q[&^JP)SPAj)O"bB3&=iRk5rGmUN9r>"Y3`p=23Q9Ou[]sDkF6q"o9cORX:(m1lGKpm5BG^"@S-sj@lGcFf$U_6+g'-43k5lb>30s`S$he&D!O:]@!$'p%-I=BtKdHSJErc8hJTejF^psFF*C.5%5&`+S5Rl'm&.Y3i;!W\Gcm/jQ.\GuVX5eB9.E%V,U-.&e7?MOL-X.pd@3-PkY4SR'"lBpNkG]eB7ciCF7T:i?6oq,P"_VoVXS3%Ehr8LVp$"k#E!;Zcac@N.ak\BUc\o*f4F>*Z]/:RM?m`>VFJF5\7j1)5Wiia>.f<'(cuq9$gQCt(eT\ViYf-cDrGs+.JcBe1iVN';(jfBZEXqL1ijpul)Q/A?F`;47r'EBAS6Vt7'i\"L!?_hUmKQ$0_;8>cD:Q7BePn7g:7u4[tqFd:1\PgS6O7J[n]@(d+A!n[`6kD/LP6s__'4f'++>jKK/T*cE1TeE%P7#H%:-AR57.BaZZ@Mo\=d+/C%"suf=S*D;U6iemCW:k^mbi$!]dVIGKGmRg.`cqU9fZ8(l*h)gXNdP,`!YYnDM-tqP-:G_t?UE$+DOB5SM]:Eu1-NBK)U-96i=dU9j4@`.2oeBP^GtiqMp@q4HnJ>qD[T+G>WEan!jfmJ9AVkY/`]K)*3m79%T?\;JkPrTh54/VJS_NisjmUM![/^nJ,^H+@lGd&s4V2fDkgB==r.i*8Hg:KA3aYbaVQqtLCQiE"3_=.P4!8KksY5eEnnOZU+J1Y^K'E%[c?EldKQiIpMZ6fSJbAb@,+!h!snF.#)EB-C_J[gUWV+[9HhdXf^g2L34N,bG"R:N[TZOV/asC*<:oT5j]?;Fiu9rZXI,EkMB+jIF7B27P6B%H#,O?%ffHHV;7lW:.RfdG,sr[MJnF7+,_3<^@:'scuNe%B7Sl_O+./Nj;dRXlT.$@S_:-J>AHCtcB[mB,7_qXQgNXO!$II=Zs-M]M5od`uB[L"6\)Hh9%b(If(S/]t.GKaRS9!^R#5!S18"O?:OjC,\H!1KXnp24rT1Y0s$JDDJ"::[XkMku94gV*p8RB9>T1=t7uuYf"(tlr7U7VH31g)^htL,d`>Su*bk7%_.s'^I;S0PBF@Ac'$_0l-n#r*`%W/_8eLot1-WmompTW6n3C9r*FfHaJFQU:94"YdT[*,X$A6*e@8QZ@j9*=A&B=T>#LXeCGMT[kAq"beDkieS-6]&uP]8aV:dsuKG,eqR2iV$!d0'1Gm\K^!;R`d?Ks3=\nj1'&VhIrP6T$5C&fC">7Z)tFWX=2"fFSmC8#L4WWr/S[LgG^.bPX?NMW`##lTe=RhcA*QhgijZZ=GdHUS::o!3m2@S1AQBLS.lr+lQF#.g?[hprcTQN%@0C9%ga/mrQ(!@cEp_+^$afQeDVUJ'JQm+S[!(bcF6@N)HEb.LkX==Ch`8@\u`VN+RV8VY$F#2%a1-H49@?YmLn$J8khWG1h;C[q"A^@b-kNaj`5>Goc1Ek/t>"YjiUdK!?*qA$#3G9-6]7^S%#PUfo!)0=./8\T%qgQ4)5YXS\oL0/WTl@`[ri0NN1JRjJ'MA2DEH!34JEu_:`G+WHL"6Gn/#_[la^K7;I-#.>kU>g7fPkW)8hKK[f\e(4!s0AGbI(3nN_t?-LWc_fFijO2*>dmX3N_8khWELGSbB+%\n;^=L;E/UhS3U:;#>_[?YEYtH=b>;ULl?q"]dfun6])qm%pl4&\3gPa6harV+60[FYS0pSaZelOh/MV!>V'[?ti]:'+QWpj-'odV.(=dQ%.QXn3>pmI4'&l/TH8e?TlXPt7gSM5&7ZFFt,fDHN]k,eT/\Trsr:(l]08f$sp5uQ7U:O)j7;''/lQl7#66'ZTYD)<KYpXm.qR^69+`>:MZd7[-Ak3LoTsp\canl(@t"^ZcK9Zahlm;,s-JN]D9:-&J(pJ$.Zsj]q4giEjC/iA^f0s-23XFU6T:BjJ3VU,-"2EfCLb8Vk89m^=atDG`Ean9+oZ]g\c=c)34!F"Pc)o+mCs=0]Ir3L@?]\Gu?5IrC$frO5-<7j;*J'ae/Id@#F>jBUf/pjfXJH65u?/ZY%FjH_<'I]0&bMZjt;c6LLfdQFO`"Ckfg->Xs4R,-QrsnCf)as^L)6TT]J3'qC[9eSuHRiEH#Rn2<(S8S.6\",.fFauRK5J?oc>UM>7>>8BD1:a-[NosRkpeF-qpt/eUnZom'5ZSRc1N>B??g%F3O8d)JQMR-;Op:))E@/(HB3h`kNAj@HG.po`mC#sLI[jHdRB;3=3@+Ap_R^_7m#tFl=2n7I31VbT0m/1hk&:A]pD,`t&^IfjEH;uNm6XGZEca`_FrNJR&[Liao(=A'Yn'q']c"7\qOtLq3G.ul9Q704$Bk\>m6]0qFb?cI`ifo[gJ0E$NMu'bDF:YJh.3ELHZ8_gN*S]`I>P+?ADg0J$3jCm'2TQEbES4f<(aA`hrDFm\>UAbLcZn;HV[CEj,^X(_&]/e@L"sX]I>_CUF&!g:=U7tME&D7AH7Q&J;o3^r=]_#$JFBG)UoM*X9HQ5q%XXHbBNNKU4!I(96DDlKba5?1?JnR'*Y`EoB3TQZYal>(-A#a([>BXHf!33KU>'gK[S2&TEi($;NPPlg.F]^Yk9i_Y&**RJ[cXpQ)\#*bUBWM[6?,!-r@F7^Y)OBppoS]!11qHi(ajAZ7Y5eHEBY)`GRb@n6.7*_Nb&sf3W86g)_aZ!8&VW()GkACFC\ZQ8K>-DpkG.i_"Qk;"BT\V4'h/9p[(Z!Cd#m51br:i&Y:s%CGF75Q;9.Ar"*A=+_LAab^lGu`nMthB#h4'iS*C;/-K_u^psTB1aab.+@i(eX@%,'S.N[*:_Ait(=AsK,>TAcSE!`=niIVef=!gU;48.5)3A?sne=/e+0MXDg/joC-0;lTFT)`0$*%tqkUGaeE2IeOVc;48.5)3=sG/`eDD?N7aiY468kg^-D$r[$>U,45I1*?gl>KVNB23E'cs'6JT/f^]n3-Pq.1aab.+:"E@b*gO4:MTV2d-bFJZjZ%,6BpV#70_h'F%\OE\H^bn9so0'gd-bES>aMZ*,odE-TfpF];qp[/t>!/Bpt6l-l0l)kE^.EF5M9/V(3fM8;26=;Q!fpd,qD:kM@E-ERNhK@^$>B.D"-)$C9Y1K:Q5K\c)Vj5C!.Ehu!Q0>t'HjF*el0bErFAgY_dN9N!c.k&/NApa&,X\N-HG:0N$1%%LOZ53E-e]mT"CnK;)E\o0s6?/JSWg:^8FMhAOp1euCMk^kY38W++8nZ*HcQ\.'V#/\(-QoX.%NSi[[Cq/ZAoQ68]0KLt2f!G?%lG@nlq0*2;)0M5^Z7F(RsR&hK`Q%="IBuub;6I23p#0oq8n@"P0Bm3qI)B%8RXcmRmlpD'T"Gh!H+_9E5Ka8B_^aOa[FEDCC9d4Pj$g3t]c4/L<2Z2WqQZ]ZV/Shc[kHk&I\X&T>3j+Kn^idOq+]*+ZUBHn0dCF6)f@BK/k1W^+))T$P.P:o3.Xp.1_SBX+IqbA/G"W:#E@MHkO-bLMA*;[RM``hTeb`cPoHhm75IlSJLasqnC[Wg(R]l=[PSbm&ain2SbtnOmG-XEn&`j4D"uVCRWa>/KU0?(dT`TD?_TV;m3XVi+GXLjqW]W6iU(tuqYX#D3Oc73^Q+B40_/*4IW1qVZ"Dp]$NMc5L>*3MXRBZfR,WiK_Q+bJ]S-bSOronXn-]``T_oCH)B"mG)m08GaT2JD-VuG(>^M.m=C(FN203'7GDDG^%bmRNUFjthT%RCO7kM@uI\J']Yk8"8t(E3-7rnEL9E3K:bC!jH6IIu[F+2@cCW%m.&`bBXYF,A74]5[1cAB(X0\-p._,mFHG9c:Z][-8%F(>-%!H6l>qJ1"QiV)Y0'KE:RcQMTZIER8s\X-r75We]URfZ9Ldk=Y<#=p>"gqIu1I4\Ba6>d`&ce.ZVG:#!)'oGAbG@F&+7,S65nLM`PTS8Aa-GX'I)F>Hk`@6PZ+:GLs&/<>(^CqsrcSIdY&DX(0P4;WlIkE^H-l^\)WM8`af,?_Lm*5.pRRY=4'0/ZYil,@aue`@MMkTcOGnNfe%L]!hIM[-Yr:*Cu\j]h:oK(G=?Gg`jnOME%Xl@dUB"U\4,"IO'&fHNE?AOcHUdO&:r+aN3UF>OgcuSrPNYAgABYO]:udpidBlF"`SA&LRTP@reI\J"&f$7ATiT_Z-Y]sJa9d(0r,&3.M/NGLPCaG&r`rqa_JDAU6k9l.`tE$GR>R@`rSnF;Y?_2G%[-E&(6X@";(3$Eq*U%6l-]?)!!mEUi41AHVj\@iHS2R*jp+?AO/kKr"q[A"SM#0nf5M0$p*g'-u*i>O\bS5milRqT;0L2L't#4c>)<&%a18'>],cf=Ep]2D-C8moVo97sea&*GS=`nK@gOe_QcpON'!\p)"6$ZLl&ts,i!7.DFTg!,8$[3\>j_CT>h9-YPgWh*oNjt<#0tbS1oUXLMd@siX,VD:--(.e45NspFebs/0@pdq[iOGQ2&!C`)tWnXfPLBQ2nslaIGe@Y8<[5-W9?6I\ki**N;5PD0W+eG4T=8]37eD\eV>QP`JBCXcn3IUE[I9JY(OqV&&5KA!J"d(m3g&1+_$;:4uNb6Lg-A01ABnTRh1W+\HK(EhX@l/G$K!P?ko!c>C4!(Z=(l2KGrjb;H81f[gkkS4H>u.Z]h]!*H,&"_r(Z=(l[WAShXPMeJH^3[i>^G/[i!^P>#oYd)+*+0C7*^r9^2lr&1\nirD0!tf\_o*rEk.UsTDt8X\YD?kZahkR<@q!V@u(fHf=A'0m&S3A'8YB.HtClZF7g]"ECGYEV'uX0QO)+DUfR^ZpGP]gDTBn@NcsC:!'"%%6B"AV,_g`ZZ!4[.hX[XY!1n`/Vfi5#2RJQ$R"'gE?K56AN7/`^"5:)f4E,GZGWt.3[b98?iJM&H2qJ"X+:YNNLE,I,\SSL"7SWbj\G+DNf`iQpqA,PBok6A`4q@I5F,be`bmoa#/Tl&h]oqM0+Kl]m)iEVSpm^/L(g9k]S#.AsLoM\h*Zls\CiL7HoFrR3)?/hV;]fu1?qpddkqX?/i(HAmp6-_?MG%]s]V-PV,lbBll\b[+>([Y5;L^Cl-q@I>I!1Bld]"0)1W_Yfjq_,8oL$M)_,";Rq[PQ4>k/ffKhu2nGdrHefDZ4SRp^aBOIO]7!_OdA+^q%ULWNuT0O\EL&$4:W4Uh!bY>CgkM)aAFn8m!>XG;jWjRK!9Yh!ZHaH\,?[/KEA)4#qqU@!s8=U!WE6UTk,tH2\K,b8XWlb?GA-m!T0:e;`qoA4b.OD\Aunc.c;fUHSXE1rBt:5d^R_FF[[(.\@NDIQVQE5Yn_:6Ad&u9ImBSJdhmjA#At&djX,JWP[RDG^M@2#+gWn$N+"(aR:J6BBD6RA#F`-7$Foflg`YLVi,*EGTKbhsNB;T`?CU^ueg$eC;B6/]tkt;E;BkmchXtmH4fbT]l-n_lGDEF&QH\HJ.G5L\UD7hl!ma]O;*MrKK8Hn9,@geiE&P7c;64;tb1Z,`TfT<-$cLoeB9EqD#3*4/^%V,s_'f+#m=>]BDrf@Ta2[KbhsNB9dP_!:BX.mIGkZT.WN=)Xh`i>jak#ES2u71o^p8SD2=UkF18]%CW^HQCr^cjqt,lbO#A$X,L=h[S&`Bl9YmA[^4PqVRL_'5Ber'Xtk0?fe2eOWXJ3rF0Q5*/_0/`rQC9$`!4LJ#lU!LGX]bt"X,L=h[S&`Bl9YmA[Nj/0-IQe&XkX]?f0>jPmMS&(DSt8&J\9eJ*=\O>N*T\sbBd;\FeOM1gQC`*'2?0>e#qSG[Au.hF+;spNm>(!]6Lq,3Z9tZ',udEUSoXpZuBnE@\%9qC"I:=g>LOX%R(D>>9.S:^q#od87WZ.gl9V`bWn,_Y$(Xg:r'2XVa$!',udEUSoXpZuBnE_OYK=C"Gf6C?2sSJiLg>F[JY$kA"HNO_ke4`J#)QD+D<]9ip`-N4)@:>YT#[ZAkTY\Br+'m;1`ddndSpDBj,'-8lLi7T!/jB]7`iG&a\LUg5sh&L'Tt961nech>S(cd7Fjs+dnBa>SpUi^+%9[^2*;9b6X.\W,Z*`6Gau!j,FOafhG^JM(aaZAkTY\Br+'mHiq>e#Zh7[h7?)DB-/NlT(kB2cgC4?,]8WgF0(Z$S@n'c?@JjD;'\b)kifAfJDB&,5;hA]9\FEB(f@_96$Yji*8.5+qka7X'3,SDBhTq24<<2[llJBQIiF#`@SX>R`iTj?m;?ob"<_j-aL9NWpN$LLHAp=;&]2gEFPkH8A4Mck4[Xl;[Zd(-]fCmWo,&JcRo;XH67iC3jqa7C[tW1h_OEA'r>k(RkXZ&?RP]>R`iTnRRBg"j39:qO3a#W=lNSH([hpu)eUd`sE_[qt!Xea-a"b:^&">\N*OFqcpfP\?DDL;/GF^[]Ztmm$@R$f4EpjIuk4\T+;6"O:;r/f(e[&mN>/(=$beLN8h>Er#%,f]lQQYffY(M@2#+gQ"nhRSU?goC%&Qeh5q.ABdn3(ZUf%`-TVsr7nf3+?.bp]-#Nlm%Q2S/eM,hB]7`iZoZeOCU]4Cj&`]X93E-$c8AI*jgk_N?n_:5nUQKopQuanB$E:\n;=(#2a"@s)>\N*OG#!"Z8SL+C+D4A-2ZV-'__):;lk3aGKbhsNk7HgF8A"Bm\MZ*nFfFmO'9#sdZVXZj9VG$%^.Z)e^Q@nF,3U,8Z+^q-4>70)pmHj8r;L\AHD\:^B*XB0ISZ@KN'^"$o_MS^QSD2>'cFkF;e1UIco5RPBfAhVqF7p(Z;J]=\N*OG)g^J\JnE]++G"(2Rn2l2U7DX>&%&mMUd@Q)>L[3IcKi:UJSODW8([(G-'D'T[1Y.^6>JL8]>7)e7Q2-]i+@#HupXu,(lG'#gt+*i4FKcGTW?*+71BlTT36u08R!`AXP5TO)(.q"8p/$:_egiaAn2n:6Gm9%)ShtV=Ghfmq'.F@L+2m`bGPumO7%-V>-`CcLLQNMAHiNIb`iiKZ*3k4#-Qs3Rst\%A?a"JXt$o+F41r2+AljZiuRpa]a1FZ^@>)K9RU.\5laDuJ#H\L4Ocltc>VZ9$^k-%>@V0A7P`72G5Y=CFH6P%VD'nT(:e?.Mj]fODP:m4?$Xc>?(DF5nu;7<;8kfDSJ,hu2nG7FBt6Wf(f;\t36C^UM:pm?[pOCa$!L/Y]qL"o,mDm3m$nr$J[jmYR-]n'+M;bR!Pse]#".l#)!+XC^NjaK)1(O/0q\UNZS'-T@p:8N#;RB2d&Eoj3IZ$ZGes#T>niRUq57Q?_U../\skK[]JH,XS3mG#3)SkK`7`m+PZbiDI\-LXKQ$^`kjRWI;CeC"^>i=FbDSpTHUQMhh[BMn1]eHP?qUY%n>0j@&8XrE"A6ZUo*"afa?UkG9)>Z[Ej>H5Y4dPpT/b"Zhmr3gLi4#l,_NH7mc]0CR]j1h+-'hibdqqRt!6=)BN7%:+oPLJ`3h\t[u;DAQ_0./j5^Hlb;$aY`^DqkKY-EG;;bAm#-TlKLWb@I*^>OH%`]*[9*Z##@[o_1[qe_X_?YFO6o<2K4"H:K$8UU+m9JT*/%Ah4MUb9[(Y*Y?85Y8jcOY&@k1PG,M-Irb9(EOn[b5TocdJ20e9in@7e`@gd04365T$H&r/\Ib'qbufr?k1>>M]]M_,]A9Hnu.9#A-h*Qo'6\L*TK$,TDCQh.+]ZoC!n=Agqm\[up"8*a%>>gm1[OiE_gq^sA((\5h96[m7k4-pe3245S$V(3DT\hTZ^[Y/RM*>^@P?m1Y3OkCIjdQ$KZcq$Bpi51^G943q0Vnc`qVVj7U)\p3@Da>[01q(Y[rN@j"'I#dSbY!1pMeCT.Trh"L6mG-bsTB=o8po1<[T`'0j=""oN(K^KnQ]m/n[N?22@Zq(IVLPd_m'TF'?H>',%f%iWa&&&p&'J\JR`m2AdM;"NY$:Or?;s!FH%77)cC(;oXSh`cF`FUkKC,)dqu4Hrq\65i/1=!%\T5cPH*2%dlX#n+a>Kqob#Z#kDNa'ZQ6teg>)17-A)u[Z?fQ53X.8J7D_(2*4gT(9h$`Z+5/fcHo$*FeIa!Y[Z#i\K;2nhE)PoPd">ZN@hjW=sF%sq;S^q"gXgZ$@Zm)nQFn*G>$u"McLjX:*O<8P@W3Oa;hV4^oc3l?mUra2##8JP$DE@Z/:m9DZZ!@U:K\T5cP3F+Rap,I#IC?-^3.A,X*c5m3#U4Ye#F%s#SIGIkh+8ti$rW++Ur>P:mlDM4L^$hU"q<#gC5N]Gi&UH)p8)oij^>qa4TAs2%/IT:U4@Yra9r)(og_9S(8&,%3+P`]%lCR8bq7Zqpo$*FeIa"4pOVdFD5WA&C%n8pF;Ehq-L:q5JnP%jnqB/HKYU&"6PLYM>6OLAYN[tY]Yf_m#3V;HfX^u\(]OrS+8c3niVrP1D_)bLYS"qf"j#:2Jc*Tiq2N=FVVp6Q>_KfP!L:aX(4k,ZX-pk#lkZDF\a_aOqSkh2j+Q1KL+;4]/[W,O@^X0@@-!_/YdRXRQ/8*.R<+cTcBiIim0cQsIY`pm8S/R]md:A1(*?D903XQEc2neBDM=h)\]Gd\N3K_UanOUE(sYir82SVjH*nQ!:B34*,S[u,kAJTUPV.2K=4dHB_5JQLY78Xi*>9]&NP+Cf1d^],$^k4j>]OsLEs29BQmC.BWIT`MeL)3,lW\)Y2.UUg?lMf/AKAMGN[Q53.&HkaL1/9FlNsod36W5#27mqjj%UOD>`Gmpe#`gC#$@omm\cqmjPYgDV^`"79t/S6Lt[Da/LCWM5:"#5?EGoW<#kjT=_E^$P&ihj'\f\3jeK82@dWmHt%G>=[&[WEYE3BJK%Xm`*H3:/s+XG@0P0U>5C\*?q7GP1^4VG73?a3eGM_U*?ugH+$oq0B["OfO7_A"qO@4DB-E<\^ug&6q2qWZQmi"I,Nd@HqW%5(trB0%?$b2IQ:']8kN;L\(?VOYTp,,1%08FQml%N+j''YZn!+U[gp1oljgBQ)*#*cmSu3N\pgkIF'n*2YG;X#u0GjkT$KQbDl12tG)c<[iQ&S;m.s7QYQAPMGPEk&oC;Dm&/Tht=8O_N.0@F#SN>gW7skD4)ddh`0a8W\*)jqR-'_Y1ucS`)C-caM>>[P.)[eY5?R1dbSAGG62`$2*/`/\$2iQc'+oo2SF*_ZJ*jN6&K->nje_J!9Z,ZPs]nfr(cD8F-4*'Zf6g1O=_+tQ2.uN,AZ_,_8G3Lf5^;.92oNI$m]j]k9pqH&jeZlk!R>O*B^/X%U[&-C'OAE@HHR&ilWhoIhQheR2^5O-W-'WaMfI`_^9:?^>s,nUVqnq^7o05VgPG0$/8FSK/XOI0S\G!a(9t8g9iTI*FlO`,2m/me=5@gJ'4Ta;E'n.&6F\h&F1Vttg':D\s.C;jnc9pF3VuhDQS!I_9(%#^(uBCRH3Mn-?"R@h8^VM%cP]$K!6.*P([?lHrZXX^%nrC5nt:sOP@;uEOCaA(oLPm!p?$MN?`Ia`/Vs*P8qd'kN:tir"[LgijX!bHs>TTX'I72lbCp.$%rSb&Kse]q:SA^%WW%&1mXO?s*DUkJe0P\ua2A]Q$7,Dd<%a\J6h@Ph#0@KQEIkA@p<.Y+XM>Ck\>taUCW]`)_kR8juQ@-g+E5a)nMlk;2#+a]G*VPkZqNgn6#@;9hnEio;buaYVk'mLnML*S6\p=#GG6%<`k_N$qn1,;9k8I2'&0GAl749Qk=J*=S.jS[VqJKaChQ+6'h%aXnG5P9rfANp(_CF.";c(Qu8F?X5[jUTOUaN^f\D.Zg/-`Kc0Mk8kI\g5VTt\&Vm*mOC23@[R)_Af%,rd7C\\+3CKY>\V!aC-k#p3.@VChiZuXn%L_dn^"*p\]g+A$7*MbhKV';p^_I:ZE0b^-Ho8qh%^_%#3.BQl:rD8dljMMD]acAtQ@Le:$NdTR:\n2"sCFK8D\U*P<"8]*4@7`TPF*J,-V[c``?t)T@sGS3%G"hM_Ef4f'pAX6GB,"gg@Cb>Xb0\V!aUD`7Mj=k(pg/W;`gR1(HT76&-'hDA*&X!g%\Br+'UZq+"GS/,,>mhlQ]?5#)*Q]6ZH=8W&$I47@H$fTG!enO\oAr=E-VA+8$].POIQm$KiXX`^\62jQ0!2$F+[2giau'#Cu^S*qFs!(/pGh[r^G/`_cP;Df[*0O<%K]Ie70!p:Q7p(i)7p`$29q-5&D$Y_cS&e1QDX+0+ic;LVrqR,dR]`/"f2903-/;hWbMP)=5dIDIOIQm$Pt%:N&b?C5+1jbA`t-ebf3bomf/,J=[=.sFq_fhXO\WO'IH)9g2)[Ja01V]1kEEj?3+&5Q2m2]DDO2:IP"8VR&X!g%\C*npXfln.q\i]Mi@9Os)OqbugROf+QhH;@]CGS^"JqHca8qRu\oH9&h-N#M,a#1.+s\O(EM\dj=tf:**k(+u]:XLET5[N,F5q]3q)R\te^iUVO=I,NlRl8-"8_5.j!od_FhD]:M.BU$+aJ&<`K^Xi[!(i&mbF`2ft556Y0*ll8Tu5*CPgfg[dT2Sr:>d0IcHT7Co?NWX`MEtIZ:$H/f1EM^KC>+KgeIf;7t8B@@+8ed@?Oeb%l_t60VM-'u9)K7a,H'ql78Qr*o!R6"\`\Y,R+5MC2\C@M(XAS!j8@U5cCK\l:K8Mq/bE/3G]U%_%)gJ)X`dA'6`,%cgm4sY>'%foG.Yf0Z&J&Xg:8RRel*<>:!;r!dWf8g@,3a#k;+b/.4XUMNcoc_>p>T=dhe1mG(#DqkF0o=3b?So%..N4TVZtiZC5L!V`@i'N<:nuf1W21loLH/cAb&4T?-7s[^=P>[!&](NePP_\#3I.-V_c%S`1SWe2#_I6fFC4^9*a@RO6%`F0g<#oG3e$3gO5-0'sbV%Oi^%_N$+F(pT7(6YpesSSLHKcWn.VAhT=m,p!828\TV^RsY(iI@7'=>)`'JT76C^cSh?'\\u_6`_Fc"?#JG3cF!d>m2^*bL_2/:3lEACMfY(5+4!V?2]4.*:X"*rDW&kb5Q#9VfK/U:Y2A3rrgM#%J!,&K"H\u1E2I]/f1GE%/,.iU(;au0L_2/:3lEB.&EgVHH_#4PO)==X;.gl`OlF,X\+37B`DtX8?W[H$l!3i@a@ZEO"W8NX`dnu3P,^lcEn]^>jq-P-/,4+eG-6C>,:\Z4$eNWC$#8Vt-2Xg/=)k<_c):#Riu<2*in=tDBm"g>%:UV`LY1Z%3B,PUPl*i#T3L4*(?(hhea?:W9;uo?iVE\3%E=S>bZMV6XH(Ir[_$N%M-*@"+a/\Qg:@.SQ8rH*-fZR+3Jf^j*@K-cG*b/T-W=Oq>.BS/a@Xj$5c7,&]ifeG=7!U&8]36I=H1P$/8=:qdoVAN7Es/ds(f6`E`"E7-I:5OE,H/_E-D?"c%1WL^;r-1$SkXKr'pH5Nqc-O:V"$3=nstq2Hf@_\Oi(p\*k>gE!bIXI?A6B(1a:5nS_r[dep].+!Z44pQ4*rPJ`$+>P(25nNdGtV-uR*1XBYTO1RjmA=`OY4(-ZlK$\>*[KP%Ln3=#P`B8Lr7h215CB`Z3L.F1=2e=%9#@foR=+D&cX,_5-!Y)]^:I!*[3.7oLH(V\\Z+R0$aXKZhl/Z,^LAEj?V.S0cB2#3&a@,sipqn$#E(MkL3\(XkO+K+reUl!ZS`!a75D]=#G,_!;2s)8HOL`4AXNoG,9:6X?(Ot)(LAZs]9&"//e6"#Rlc_kjGOSMALA["l_L%u;I`YIi:iL8)!c8'U?$#XG4rIo3KBQpW:rfo/LTWti4W&N?ifDgM,p09&#F+*,Fk_1hDNVUM>a3*X'Y5!PQlY49tWVbLh:r//-DVT-+#m=ORIj*TFMO^1&M"(;*iEX)giS57V.=*.@^m8(EFa*ZXc=N$0ir?gSS;`6qf^SZgfi7q_eP[Bh83d8-+7^+dJ_5g$5Z/=XN"1Gk4]\fP9R=3uU-?IThG(%o=?(7@FhgTEoE(saMm(X3-^256JE2u"D\Zml%3]I$OSEmL8;1Ul_W>pAs554Be0&#DoXtQq[E`,3L>]@WZ@\unsG%V06Pe>?8B::)5mOhk$KlC6EFY5g4):!qW>?I&eX-sAPEOEZHK(-[#N&sDeE;e5.Fi5r!ab:Ggf<;$f/P;QtmEQEKKg0H8GF+/0DU:NPiDre?>l#UY0B^o/0@S4SPD4+E5i4?AP!fJBaL0*PD)D,)2\q*-6,TV[EZO\"rpJGa(N'm'O3+@lSW/8^+]WU?i#[C0n*%[^,2AG1I"`&OleLCL^%$s%s.F*H4cLfA0[F$69AlLf;6dL&_GOg=1_+YC\"Y/3&ctu^`hK><&g5SEUoY>r-j9B'-j#_;U^5&!JYZDjsS='6r6H1K<7dP,EZ@.>;"Ncgs<`ei9@'aF[8rM8*pN&s7l!5AmX;C=*nL*F7ES#YJ;=:NprU_)*oG'\TQFqDWN9r*NIn=h(c(hn-^q?lSCb&rjrel7qf2,[']<]?EO[lSa2HrOudfe9in\V)gimt`p[k.51Rj^_ArYS,acIsLd;gYgUVIAfj&H7Z5K.d6HDBgID'3Wc8BYZfCCLr3oJ$hrnsF(>as[7cuM-tiLRGa]$c'+\,B9TB"Au:6G(?*;u8Tl_B$S/73VuCFib01+KM#RP@ZM@No^2h3,VmV_N1"2SSLE943Zs_JTHa>CW(#?(TtO"a/0S&KKG2gMZc=UB5^XcY]DEo-A0_cHl(';:uGTcF%84A#hEl9>lRS],]3qd(j?J%\$!E7bF*V@4t"'K"J"4A:pF);,'gV$)DB]r^Ub9Qh2J?!=aM9EdLqfShK=?lq5P$cUEaFlmV@k<9lphK#ngYiV;JD@pi*4+Sh75IZ?^P3qj^M&laBg:\6(l!;+01H0r3-&qI)K\Ifi+D-XT?i9WlEhWB4n.Fqoa3@reFagrn>u:U7=jj?oU*ejE,NI,1oksrRc/$??CC/l&J*Pe1l#bTluj@2*GuIWRO2U7@/ODB/7Q=ci2eiql7&5NIs=TqT&8o/sf>1./Bb87jjT(o'dlr*LAK*[B@*YIa_bs"lNq`Y3Y!Wr=W4g_6S=='gqHEE\oqnt%C#$&/oPtu:rlCY3mJ3`^lRnR%h,<4#L)c62F5=7`Kr8tFD/l`0KceRNUuc@ggKq;Q?KEGb*eSNmkiO'EK[.f-S=H8.$K7G.*"I"aU6hIs:Kk8D?[4&0kgR_5hu6s?c(`C(d4Xtc[EE8'h[%urh7.qeS3$fPh:_23_+%TKUG:tTccg/>jeSl%$Q1a"]61tJ[5f6!.X)tof&"84CR.CFfLOE74cajH=euuKEmr5<\#6I@Z]`bIe]$&&Ej\kl6lSWQ?4s2atDWNB.2dgpZiai@b2<%aX,BhA\iEX:GaY)m>34`nWYK&+r+r*,nGH$n$WI(+!&sd:[_<@d5k=RhtVr_rY:#/gpAM06;N.U2u>YO/hP-j;%"%-)S:ubg(D,,9#b`:EM"]VCbC?LUZP*D.dNL'a-d8)FH\J;g#n`:[Y\kHg]>]714Vqnk4Xq3=I5[`#0/8UfnY8'Q7b=l:>F]qO`d;HR89s\n&mMOrWX?2p-ude02P+SYa#QCW&3!#edSQkPB;RO5&a).VKeb'jj^fF5>$m@*3?*g5j>t53D#TfdLQSD0EN*Q$oPJ+1#_H?m3fiH6F?LI&i;\g?g:n,K@9sSSKl4C$kU#L2eUuK5MO3!:YN[nqJV?i2__!`>W)PH/WYAZ6Yh8=+#]msJ,K#"DZiSM_&_;ihJD=''\Sbo&ZnnjZZ>SGpKVK4CPkF/uu^ugrsjd(TBKo=1AZ`I`n;=#31af2/Zac^H6Un]U!;?I^=lcl*IA^,R;;W_DaU"A@l7d$48j-H6WDd2akQNJ#9c`M/(m^11m<;m(/nJn:C0iYbeWK(7^Q[CedD!DfY^O-\s+p-5HqdILT++E?NUAn0%E/g7\\^n=+qq8Grdtmh1]r3Q4bk!>([iD?n*u6/2Y0\e%WahCFjT\-75'J$jQE(G(f#PX%99\(H=a?uu>`N)#0L;T3\Ggm>?hIQnm4VdaP>\BA]i+@E/q&9R)D$FfPG^^'1%Fa()^/Z`sjOE6u7_7Im1DN8"#=6/.]3?[YCT=j^b]GTgO-1g0+?h8c1F087tQi<2`_Ni>^mTZ4IVl4L4I%)p@kZ$Mt0Q!UD=5E,NkPq!;Id3d+)#O`OfHTr[deF!n&+`Pb6ImZG,D3p6>RD.,P*]62CVWL`fV[tM)#n6^?GX^-AYY^^O,jR4VK14%(EkO-VJW@N"lm/lrrHYLd=n9Z;8rR:4/]5G6%R>3f"Bt)g,ah`6"XjqJ<#N]\bn8ER%rJPkF*bGJ-S)Rq.E,1Ya;t:BcE`!$H>6B\=R,9]?JI/H+kki>gr%E-c+S3gX:)b_+B7I_RVD5UlOp!M?T4kj8VHL(9T;8=4rVGHJQ)Bc5C:BBXbsk`Z(BfV_10>CDmGp]l%^t1dE]`4M=j8-JuoXcXt,)9&Y[cBSRpaFKp+TcD=#^-T?s7F)ua)nLm-$i;(p.\0kA(a'F:?Pd1`_H/n!ojNhl*)K0YgrF+Cm)iU[5pP,$,PGMp%A[HX8AS4Yo)kQFtQ?Ho$a-+DoVVk_8pa]:rjf7+.i`dKEgj\q-c=-S47XmSrDK=O,"`B?FR5duBQBF4K<3r"\>P@(sW<[#r&FD#`_4UuX4;Dl'30_q$#e&(dm%d,m@`Z_f0A2876!E+082[0U9T"qn7iV#YFg:;WKCFO:Anj?V]#*i_QF6ThW3&elI$%*o2Ke'(A;M];:C?L&5feA53V"tjE;2Ak2_R[]BiRV)CbYA"5c(Q82b;V(&`DtO3&,i^^L8,Vc23"[,MTuXn*fG@-"rl>2[4[u=A+p+D-X;jTDS1S%ijkIr/l7BQkIQ:u!E>o@%?=--lAb+93&en/$/ACf-KA@SK_`.kJ9-96UcI%Sg+j-:QYu`X:,O6hXS5KrkN:DUJX["uONoul[rammdk5WX4MZJmYab^uJ@HWi0G<@T/pHaNV;mE>_.eb>r9Opd`2-s$_mqLk-?*>NR^8PHZjV;rF5u6OG5p@mi-1?R5m:"TgQe"3S."FGI@2*%pk;-p/aT(9eZf.nU5`>"aBiQmDctj0fZ'6kN6Nu5bRQ:?s(qLI>)iI)R5"XMd-&Nj"0bP$YSHiiKUOe%*YM1kC?p$j>Ou!rP9ncP6`;N,^I+-eBt3I=cOD&23<[O%c-2l_7_&[7`'66iT4&cTb#Zo[qKg"PQVki(QTS,4D"$g2P4P/a5UI]d29$M2l![hc.2mG-,APPd@r>p<*5Z?#AUno6Nnm``f8dWJ[_AR?)LOh9Oi<@Lt\FkN?*3otm5iEQlae!R3-F8K7S/nM*>?F!\@3I"'G&GDnuf2oT^S5_Ld3HhPWW4,Pg$QjhP,$_b%?*p!Vb)LAK^q"D:LRDjuKCf$SHe#_,O#6'l$?gQqlP/o`0/l22]ptRnZ2(A7YOJT6EmW5VEh*$`qi>VfWU&a9*a8qAeo(/@-c#chRIbLui!)dc!R@7^bV[?44QdaB7rQ->a_1']h(rg%$k(AB7P=ko`OX*'p!V?t4MXM/aafA@l\)<`U6&LEG1gG#nm%kdg%j*Ni7nW494P&[>Uq65^\c]ngpa:&B`-$_XWk>92qDP/lKUF`lE2uF3R4JuQAN^1b)iUYl=(j-A?RjF32_IO-SR-3JL3uZZ+`Li1o;XikX24jgO&V43]C/K\b*7JmKBDhqr*n5GUs:O\6"?[]gIdGlUrno]&^>rDX3f$&E6sLZ$\EOj7Acf>`1l7[LWb.l.kPa*C?8HC0ebtbZWgYBU\HQ-iFTuMXl6PNL/s(]5rTCUEt&ZrG83K1-gY:X]7U`bqF[$DeF8D7[eMrCLZ@BO@aiV,?Su>Vk76c]:6(6mYE^sD/T>StqE"AZBr7kP('M!c)ad%W?W<@eW-EMVTQ[pib./iVL<=3e:ab/2rjVfh"Fl,H$2/e>bA8:,Ig]COn1M=9Fo3sn_K1mCnQP4'34Ct![Cb5)_.[@0^>!]EX[rXdbP.2]KmN@a.=+YMlVQQ+3YrJ$+aQ5CJWR7Gm*JZUug6'q$$dZ3G_CQ4'Oj&Kb/c5hZem7M?#PMN>k0AFJs>&`U2h(CAF^0'[UBo=/fB?h-VJLMM(#VKCe5jTu:F`^d!]!PtXj]W>Uf6C!V\l!#,^&Q.Xc:DG)\!5^Vqr5*"B>Zt5mGH[V53[MJVK7SpY[+[][sh;qRMZ&WCLWgJEjf`Zd%!J"^HSg7a8*sK\^@Godq=&+a`ai%B$ld\LfC[BG+\`HhtL,d`>Z4,h(dMGY-2rX1n:V!aXI[6ql?mC[@=>Fr<>ff-;#p=T/]3*WDf4K's\4SlXUoU+NJ-gf)TWJ#-dHg>q8jO>5*;il^`=)s)tqp8%lK_js'!BNof?6@/'?ZpUP823*^mnf5+LlGdWKHn8%AuRF>J^aB`[:Ou[6tbg`)FFg?)BIIuhI-C_0i!?]#NZ40+bOu_4Z>ToNGMN6C2P`n+_''5paFuq`D?I=Abgj"CjjIb`"$Gj8?nN5rTIDs$<[:ArATa>`pR@/&mkko[cVHS.E%;Ao<]!UcaRB(ZCWmrc&dpO>Yg)ZWGYs"MAl_WED_Tf1h=ZTX*C,b"Y[r/lj3-R3a;Z.mH3@Y%FAkpcM34i,V>W9mBXf,CsB&#;+/#"3VjnN#Z[6$2m?i9Wl!cJi[Y)@H*rRHUHe1ojkT1!aSP-^7s[nO+dV8O3J`I\pmCtRCWX5c1$C?IWlhU\<=6RFc[75SNb!ae]VG),4U)`Qkbi)X)83(!k[p1=]Cffd7j.UoPWDH/1sE:.6Hhf#>9BBE`qF+[UsV$h,DXki;Z7F;Z.fi\AFg)Z`J5qBA2EcFa_Pj/KHc8c3o`f9*@W@eusIP-Cs;@4+:MH3o/%h9e7I>\U,6Zs9c=WS=nQ)_CoSFDh#ZQ36",dN#R8-.#A?EuQ(/JIAQnhg>A81E)DmYEf8\];'Gq3k(hb3PJa.;n'sI>[f.^p-!Aq^O)3"N_1kL9!r`Pm*Oh=`cl=\jj)gc];'F&BUgteY,/+%1cW#i/8XJjV4jXs$ae@Ggg8_r1S$%D1Lb&0g7==hFucO.QO@!A7EfsnBq)\[%+S2n3\%C".uhh+*>RT>J'Wqk+1rY2Ll`UueoJ;D*7ESHf;$O"E>H#<5nFr):W8[TdCJXW]B(FM*L0a"'d:jKK!4!jc@pGrSSLAZ"K+dM(X?m\W5Jb>#]];1FtU/VmTbBfDP;,3h90bTNh[3p[*n0n:#G.%Z7j!Qn3/cIgb&e!W,OA%<#*DLd2\ERTTr"0RVg(s6bC$P1<4RuQA];:cdLo7QZGpG'r!]As0hK&:Yd`9/"X^ST@N4#B%M00llt&3a')Dp(]%lmYH:F30&nU,KSQKcFLFEZJ\u>e'\Wr;=.VtJ$'_a'b``>+BB"Cp*W,?e+;h<3[UFZ$QeDH+>+oeukiN:-/;(^#[AO>VG%S!R>7kZsnLPBb!0U]g*[!c8D4Se93SPb=2Y?IiT]f^-K:N$&!(7C)_+im,3T#q6bhrLMorZn7^ps(ah4po<%,eJkjSBDF^0#;8d"o@HB>k@3A.UT:!@!-:][W$Yfh*uE&(l1$eXH#A3L3?fu!j+:tcWRgh'qF$4e'\WrdEB(\A0]^pG*XddbD9Hn%LflqQJCU.I;Nc1eXYNIAI`7nmftkjD]E?%d!EFpA=t1:PR%Mdih:fuH#ue%,#%Je:q(q[/nVT[VKJ!rA;KgqAAVJTc5RXsr&ai3o-L;J3Xej/mBdV;33W]=?A$#7BZZr7>:i:%H2W%p)8p57]tgF[Z()SZ$8JXVS(^qdkklM3P_ONKn7rs*3_AgiaV-kNBjUfVS1\HT>0c/^&.l@g5cL*9ZbB_?F[fF=p)+mTR)85K49C^5I.e_1>/^b*_*l#T'T(rkiLUT3m>h@QAHI@74)(9!JF!4d2MSP]I#[XqPgCWF@>@d+\";?7C>_3'A%$]/q\I^BT7YT-*amB3fF1pZk"iOYlX77fA]H%!&6f/L[i<"RhW&EsfVhLTiF6+B0,IG;=&nrN_C\aI.JDY[j'pQfgE[5TCkc>r(PO`CE0h:08biER9\(X1hC?iORTg/$I*U3[,i;!N_,4*C+&f!j0sNiS^d%hARTcD;t1mSt\Jq]OAFKl[dC?M`R&FFKT!<`s2kL$g5qP3OeDhE:/9rWp=1!?@&=1'%J2]BrPIr)@FWi[e[9U,M5h?ZjO?mnGO"m5\TIngA4#0nNnCC^-sKlbf9i9@-XCMZ4?BB*7(Y!c7qG=h(sTf[CI&+NOWWFkl4_YdXc?[hprcTQOPp+YKWkB=]YS9k>)9r,?i;knDfVf!!U;[82I[eAbCS]a3lP9UY$MO-^q_eoFgI-865r>2VUHe:.#4i9:]kXZ`lr&\9M?>8/5SXI4a"QqC2h#qht%[8`n\S!P'ChfO,CNj.K?=s-'?[_\!IsTY!l[Q)KF3!$f3AT\<\MZ:oIf%,D#$'BIWdC7W-)>DiY/$)nh0&_mW<6?)kL.;s[.B%3V)nc.Md?5M&u)R5?bT*5\cZhEb!/c),J#2]5]fs8DPIkQ@7[rbJHm+#!Xm!SLZ14h9hcSYRth,%H!Z!l+4PA;+@)iiEV;>H5k-]6?h_17_lPk\)*oN.Eci$GQ6s?aZn213o%8]4""n7].!P;='FncU-!L*0Ap*(Uc7[sjgojg-DZR>XY+2:HaFs,IT5f#p*S:Y[qM/85XF"+H51aONjrOcEOXsb\np9&O9OHsT93la`V[i(1Z&:2<7Q@laru"r"$eGZb\)H*dFJfW8!h9Y]No7lpIkM*"nQQ:NXR;h$HHRo(:*%sj34Hl;DInc;37GF)?=3N7^O5eCIu)#8GuDAg#hK?_\)H*dFJfW8!h[g2HqR`_\NBh^Q^_X_rFjB*=4P.:%,N=NBR,i!.'[>g>RlP4,`lp\V(LSBg2A3uNf>c4uMRETg.<&C07[jX^^YgWl'HDOL)q?hYOhM:+;&r@V[,jT=E'R`WFW*Zh1Yg:?C@ER'i2\oHq/*=r]nnO)-f/q$mic/i_*nokG>khV5FPtO%_YSW;<]aJn-.>]FHER'i2\tS=_*K\LeM_//Q3OeOjNKi!D7J2sG4s:EN#9mNgAA>,*pqaVWOmh!UG6,f&2%&jS6P13:[T!lb&(6Fa16?#$GW;@SD/;!ICkgt,<@;7h$t*g4"b[T%qMP\rN^0neh=RXi)npmC?JWQ$&P[b/stf4SD/;!i+tL'G?>?]_dSRHa/*[fFp$\59cX4*i*:]UD5fmi22:!DD82SBk??RY9gqdPC!O,F8DQu,-A=NHlRKANc;mkYS85+IOGXs'Z?%VR;`@4YZu@&7mN"8&31&l7J'c^Fi*"/:[FDfpV'faf[2e_CNIEQTt/T)"k5I@&+TlYXnUi)]G98+<=kh^l#JTI7)of!Mpr[k[OgZs8?Z0@H2"j9X&.q`dp'Eq/s+*3M_/0.cKu>n,c]o&gn],jcHkmM5P"O8ksS_J?/W`ZmLg5dhPgNr8-[A\2Ml(MAg(WZa)27:`+(SRQ>UmdLM^?[Akg(!a8W4j64QE/Eu>goQU#T&:#c8E#T/\4>(R&VaP"n^VP.*ukEQX@_nLb8)3/W-*7C:+H.!m/6gAr:ZSPM0l0Cb^A4cOI6#G7,3mc3\^84mODegUX1d]+?S+%\.a]8/t>+jL1V,``ZlLt(#ge_Qg%P?IZe2u9HBG\MhnptjVZZG0+6iKd9TU&\af@aG/ChTf4EnUuZalY5=QILG()`baFL8S;_(Mj,BCBclpP:%0+goIS&88?`\]22Mu>L'YgDANe&Y.<"6KF;r(c8EklN>J&k,TA.VYI]`:d&t.XJSXr`CIS)L=ri##SE!kt5H>f7"PRedo!%?]K00M6mZLK'g@jO-U.9E^ip[3P=d0=,iml8lE:`;tC3%@3i7$RWFIdh2gHB%Di;'EO'X-5()Sn?/aRCmCLF`fQDC)?0?F,=TscnRST__+\(?F(q<'$(TpYk/%q]0%^4bf0Z[]jaPBR]>TW]_oGRW5eEdgn(aY&VP%3;*%_$O?olmMG)[qs*q&"42:1c!F??s@Bh)hQ8-[@^<&iM.[6hK(dNeuIME;"1iS9_Q1MJUqG.XEb\J#;PZjS,ZkP>`_El#:2J9K[Ei7r%c!87V"_8;6s/^@o;@4&[Q`>*T6=cs08I_p^)3m+.s4)OqA4!68Hq@tY"u$h2>I^kF&'m$T.E39_A.tR)pb?&OY^/qq6H(g7M=B,i"$.mTO=*)X@A:q@0r4u^T\N\QhNQ4ZeA#nPC;RXq)h1qLWC!P"oAoHRecm@dMTPuKBH-9p\U9t@[E320VCeYRr*r-^R3Z_R7nT1V[!/4j;jTb@R*lYn.&C&n]R]\%g1XE8b%cI\!oJ]5c$$k\Vk:ZIs$>4D7@1b]:4IE%Mg8>p3Gl7]-Cq"H+i:<&iM/2WKY*f-c5jiS5V&BK'm>qim_?p]^3J%pg>$>Vjd<)[Y+oUtrVBAI/m/?jUdi5b2u^_W7N[c;/RZbCs`hiVLsc1.KtSm(1C!*8t)$S\$rB?ia(t!&A($7VgVJ2S2eq(8ot@0c@Zsc;DG9R%FaYJ78SA+WE.8]5iR?SfGl-f[TR1#)@00J9@dj+"/H9MhLH9+RT#bgg90>\SZ\:M3>U^l,gfU1=HcU%u]RWA%cHhKNRO/=KiY)?B!8!d"O,^R%:pM9lCPggiP7*$aHIY/V;9-W_KO6,)jk"4n2J+,n,5c.IlT!;"i7_VK^0:69t=m)m?&BkgrM?tYKu_K(Vh[Y>NCWJ\'q&&lk9,9d;E7),-a9BSc>N\f8?U;'s?H"gHrD."9$edr!DO^[p16KarD@ng1pBth(Ej+(4M[1j?1Q7mC-Mj!ng,>G$Wsj$CB%c,3Sp:H!@c,(J8"FW,V^jhEn_aU2rU.eJ4YQ\k]P<A'd!>MLOKuSg%[51.@qm33nJkGJoD$$:<&>anR1LFl5IoX-N7<7eMn;ud#d9(3Cq5TTqs&Q3-RKq*%KIRF=o]ie%_4IiOdi'_RVs\AKY4^IV-TkofmB0MUpZd(HO1Q7U2\Vd]&3sn;B-SXqNQbLb^%Rqbe[F5NeHt/7%n@`OWh09)e\p^2U8prGP-=ERMS)E#gT"MbX"##J6KJc6[EuGCg/LaINFa3D?_t4j<^B^X=/)]>N5'V`U"oc/d:Xe]nWBC7]7)qg\J32nsl^K`L9K/?*fYf6(233Q\:;ETLX.A(]!1cM9/*_0HGA11pIWC?NT8ML=U`Ispea7hDg7i7o&Dn-D%1nc++Cg"Q8&\''blbEI`+obg.%2KhtrH\o[`ipAaTQ/^\$)pN!6S?$PP7QX'0cIg<6%.]@2+p(aE33g/t@9QE,V('C3Lto)^%Y\Al2h=k9cUb/HQq?0M3?/ZjZ&g,@#`2*3l58[2o1e8*tAXF5!hVI`EDmC$Tphu3.2e"O?H*iRn!kF-PRQAN.=QZN*iWU-2>bO&T<3&4T9,InQXZ0#n>:26fpi7oT!ZDICe?fgS1rq0XUQ9[Z>a&eMFe$LWNI]gerM=KPCIM(c\&/7"3R+p1JPo<3(39o88bf1KJFWI!AAAV4fFUrp9-*X4&l@,uWj"J;C**0EVeY';lrQaKE+2!VoANiQCRQ(QL05W_Ip##@],J>n9)CbNKf",bd,);=!]d.4/rT3[SE5H`=r^H.%0DiV&/Mbp^*k01@mp'rc(X^jFKK\Q_ld*s2l8g"<[[^i@c;Y3"BR/Z34p:F0?/70@,Q&V:S3>bTlQp!n^[?Fg"@I88ArRS]Y:hhD3IVK3oG,F"Id&`a89TFLbL^H0nWOUN\c=]Ka3^>*IIQQ,#YU*8;,,lp\"Zq=qU(ccs'NP9Y.oH=d/s"8gZ=))s8B]Uf;dK0*lQht\hGqk/QD0bNVtWL0uqS\87OsC#!cSgK[HfoFe==:d"\TGQ4I(>aK1%kdXq4GlJADiDh1XpY2Ltf!Cdb#*%HVW6h5%#.-`KNWigtqEt$2/rY*eO#=&4Jh`9N9L>Bb[:q2;9#dO.Ve%1QN^O'+aF."IRiZjc(%c&BbAq(EN`[t+4`0lV"C31"$HF6C]desZ,:E7hsObore7J+sn&/f/>`C-N^!ggm.B&_N+XpM18A::BD%S=_=jB,/d6^EgS>He-*F3T+.oL!CDpQB.X@`OOKYn&-i$k#FnTB@bSiW0OldqV^V9EXgmkF17Ktaqh-K_74%YkH:KT,$gS.X+klfpoEteb8Ipq+541#ip?KXP8i:aHN!'PQYg]A2;Z69f"50d;&iTf@Gs]p34CsJlELGi*e3[*i6!8>`XUZgrRG:4_%8\0!.sb.rZ0T?>RSnT,`VL/:VD9F>E:J#W[?@F`LRM^GJSl5_5Li)jsG4'''HL(NNc*4bhcD;D@5Q"_GoC7n5i-3\Bos`0&irJGeZ/qe&\`_IbE%]Ckr"8`!a*dADa0O$rFX\`ufQ'm$T]I>>*LobY,(GKAT]SB9E?>#d3gQE!fX_b2EH4&gW\G!_lel$:62=H$6Uq[Pisam&kZEj)\Ln&5:+dojQ,X,Q*LobY."=iN0#mRq0RHtQiiJ`8lVbO]n8_FiT12bSIZKb]Ob=`7Brd&U164Gn@B;f5rh5:kC@Vl)4*d0IGLW9om5N3I';LR($k6WaKJ7Op=3f*r.crn*`hH5/+Um*BM&L`>?99s6h`?jF)Mqb7"HPMr_BF.rao.UU-oh/mm^tdfXY3;c*VNUSf(,F_T.3Hl$-[rp%g:M*Ja=9R_G;[Tjs#[Q54/;3R)2)Z+>@f6([tLE;t4bChG3eXL!jU`ZV[ScchUOC+?oDS=P3s7E_&5's?OlPOtf+@Prak9Rld$*LT\br[=pVP,=[NHBPu+&UY7H%Q=ahD-I:AA0a_)(R_gY=iBg3aF*4RQJrBM%.nVDrFa;\NM%cU*_&Ne.&:D^pLZ_cFmdm(.f10[.jnpIU,Q-f0g)#ggPYY2JB@=GA\D$Q5l!:RY5cK@)Xnm%2ta`bKMN#;]=c96o+?!;PJ*_P3a0Kqgj/%#52Rg[l!5dY$se!09_0m^ptG^/_).X^ljdma@C\bRd<27S%>tG]/[8VhhN\dm$I0L(nOrCn]%Y5$6XrRT&n9*m!BLKV++_jm`2X@1MsG?V@pcbt=YT4?aD.LR13E%ZoG\J19f&I!3l,nqT=/g[#)GVBnNDFcSTr2%[JHG&4lF7>gtLHb4>-12S`5(do:XN`'+5^"]B&rPT7aKJ6N-PBcsXpW-QMMgG!N1i9P^IIKp*=]#;.tD\$8B@WfMNh';G"7!e8insjB9jAPeNPuP3IQa5O$"V!AtgUqUD_JH-ESdoJkb;N-^TGUF6V,-gFp,_72-Fp^g['#VDPpag'16IttSALRCU8oNA#PiKkmG-d:"+3Vj:!TTO*XBLDC)n!gF;=3&aiLiG1qrn_Q_/Wor9@D>PC3(.*@]7SY=f2bju3(0:"hckQ\[,(V"B\G8VdoZ&T:Y#>opOmZ8ra?J/'h*')?Z!TuCElOq2W\Ens,,]3?n/Ws.J8b=#&k5U0)3'4_eJ,/5aAY!^02I]A`UPHAZ4ESW]XAtp[rTFn,U#r2i5O^FGqelt&)2D^a1:X1[7kJl@k2Qh6l9gV)i:^IeG'M'F_0"p)ac[7(OMEUqu_Yo.XS/]BLc3:e18sg`r5SEm8C$]*aJ=o1H2a"_@iYTApKl_fSTFrTm.$-iG>oHi3p:W'Vf+C+-"qcT2JRY8b-HITs7"/G,4,u*nMJdYc7j'/]hmo7@mG>B/)`7p&NBed`OAR-Wr4:B<0)$:Yg1F0L80Z,kC8!kJ#\p[@@`fU.Zk>T=cAQMkBM*AYLLpTFn,U#o4$P!C-AU(U*>URkNN(s*&U]&gZ5B\+=A5L*r[)c?4Q_&t/on%QtV`;5@2CH$MmnI@MP51a,-ZeIf!HE2+lN#g(JQifIf#C1GIS16?uWNM8+_32m&_s1LfZ>V`(F+?dU+Ks(dXqm:$UVaQ_fY*f*3PZkeOB8@Mi9@-XCJd<$B3UN+3-R2?apFF;4Mh>KFVO5f(,TPs!9F=t!KZ_9?Cf![^[m`Y'r_YoR9(aGF9CV-PQHp86!bSK\;D!NW?tG:5R$W_+6:rYN9DaM"$-s:#NZ*EpA=$=t2."X_faF#Xcj1mp"L:ZNW(R-rPS;CL,Z4cN9.LB#;B&YL!+:@u!ZHVXMEl?!"a)9PJ8t]0JOGA\G,]"hLS51@2O"`p$"sPV.0<.uW!%5li.,hLg;.6QV-p8rI@r1r*)KBq4"s2Sa>&+9/d34k:-^lp81DV7I@r1r*)KBq4"s2Sa>&+9/d34k:-^lp8AN,u&*X2ic*?$!mE!2kBK:pn\l@eiZ>>sdRH7r\S),e.o92)Q+<0,l3-R$e37itVGH(.^=nYRY^iD2]IIGc>E:.c)gqA5ZG@]U,#qRG;f_9jN!p@^=?fqIlXJ6._TU^O%@$"9J@k'cM$94]KJ4u)pTU^NnTT9GABt?Uj"`Q^e!>RjA'd1tIoAJl2VH'GD[8nXk<.],l.Y']45c1Mn:!Y.L*2&?RY^"c6Zo;OBCcMN\'0lYDe:E!/PI_YI[HM=tS:DSu7if[[PI]sJ:8M\9qg[A4K,ZgZ-k*n4:(bn)O@Zp".=4W.gI7p.dnImkOsNKr1Cq6:!:tWuY[W/L&'I0ki&Q*r3K/-uP3ckWDA8qbS4uNB'W7^s:rnYTl3>%1ZD3Dj!O.pWBVTGFlm4aIW#G_`ac8:E#/FQNUQ)kXjRrE9gQ/iX)qUQ+fUqG;LZBe5Q1b9_q3X3k'SGl2msoNK9s/uD-%ToE!JEb)(h9&l<[kZWl_0,5#Nb1o8LSn!/?#k)HVjUc=3o9+Nor'5p*1C%@%eF?#+l8`tgVZnq>V5%%"@k8ElbMe>7SUG=?$=!!bh`'(n`!*#H;="6(#h`&D`X5NUP2sDi+T!0*SAnpQ%bQ1ANY$8k>*b'or.&\HEsoJ\U$kKe!A9_aOLTWAkL[+L:2GClB/W$0Yns&'GVK.(hpI%SS\Jtna^F^UsLHhqU8fYP_cRi(TAfA??"T]_X4CN1DI,Jt(!=-q%anReQ?]oS-t5$];@WSmZaD;46DUdg+(?/XpYF`-\-%Vd*%WB<=5s87(p#"ihT%ul2_GD2)8,AJ2jNjTm?^W8W=//"!C?RA:4CPldOI(8+-T](GOphO;^XX`J#0i'7_3fOedL-"Gr'_"U#r=A0`TH!'qeR8HAht&fF7J#XFKm85_\QJj`(k!WioY16N=_J09u:A5EjaG[^)L*i,+A26TNUE^-Hzzzz!!%NOquM*uP"5~>endstream +endobj +5 0 obj +<< +/BitsPerComponent 8 /ColorSpace /DeviceGray /Decode [ 0 1 ] /Filter [ /ASCII85Decode /FlateDecode ] /Height 837 /Length 164 + /Subtype /Image /Type /XObject /Width 636 +>> +stream +Gb"0;0`_7S!5bE.WFlN5TE"rlzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzJ>WFXfZ!7~>endstream +endobj +6 0 obj +<< +/BaseFont /Helvetica-Oblique /Encoding /WinAnsiEncoding /Name /F3 /Subtype /Type1 /Type /Font +>> +endobj +7 0 obj +<< +/BaseFont /Courier-Bold /Encoding /WinAnsiEncoding /Name /F4 /Subtype /Type1 /Type /Font +>> +endobj +8 0 obj +<< +/Contents 26 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 25 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] /XObject << +/FormXob.17a03f3f5cb3c9b4274e4ff3b61aceba 4 0 R +>> +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +9 0 obj +<< +/Contents 27 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 25 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +10 0 obj +<< +/Contents 28 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 25 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +11 0 obj +<< +/BaseFont /Symbol /Name /F5 /Subtype /Type1 /Type /Font +>> +endobj +12 0 obj +<< +/Contents 29 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 25 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +13 0 obj +<< +/Contents 30 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 25 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +14 0 obj +<< +/Contents 31 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 25 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +15 0 obj +<< +/Contents 32 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 25 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +16 0 obj +<< +/Contents 33 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 25 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +17 0 obj +<< +/Contents 34 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 25 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +18 0 obj +<< +/Contents 35 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 25 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +19 0 obj +<< +/Contents 36 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 25 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +20 0 obj +<< +/Contents 37 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 25 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +21 0 obj +<< +/Contents 38 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 25 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +22 0 obj +<< +/Contents 39 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 25 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +23 0 obj +<< +/PageMode /UseNone /Pages 25 0 R /Type /Catalog +>> +endobj +24 0 obj +<< +/Author (\(anonymous\)) /CreationDate (D:20260329141635+00'00') /Creator (\(unspecified\)) /Keywords () /ModDate (D:20260329141635+00'00') /Producer (ReportLab PDF Library - \(opensource\)) + /Subject (\(unspecified\)) /Title (\(anonymous\)) /Trapped /False +>> +endobj +25 0 obj +<< +/Count 14 /Kids [ 8 0 R 9 0 R 10 0 R 12 0 R 13 0 R 14 0 R 15 0 R 16 0 R 17 0 R 18 0 R + 19 0 R 20 0 R 21 0 R 22 0 R ] /Type /Pages +>> +endobj +26 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 1677 +>> +stream +Gatm;8Q4A7'YaHG]VCZ/RU2iYULOR?MMqj$'K*iuLc-Y-91B<2c_&f@99tNr;a\]8afW%$D\WA3+6L>u-,?E=*.MS936W2S,`sdqJCF>XH*i#5\d,f.-\9ZE(a,MOe7cK!18FpbO,ednV)&bt)JBRb'-RGq^jHIKq;c"*%$rF[rWD:)SJaRrMPJ_OaJ#aQ:2#^f)`lJ("<7tlZ98!N@(%7\C13>df8?Xqdp:9OC0,ub*MlN)2<=/Ru5BFo`Y4Kb#/X.h)c1P@K3b*(rA[Z&KhK&_=Iqlj@UU->RDfE+RY`"XXp.'A)SEidWmCBo6C/i-bGc-QNViI.a.`+QQ0H#^dam.jcj(X0l[Nk<)H:.1lu:9.oj-?3#<\nF4M8f++"Nk\Y@)APis6nF@!AY!"H5C5X>cZ'd('c:BgB0.dY*Wq?(%59[&5cqn5/:;V0:do'/_eob.7a2d@:=1dd^521ba+n[c..d;O=p!0Na?<2%Z7>.lK2L9T/Sl3W('3\@^`L?p+PcoT[3\r!PUNsmmIA6#.)sF4T">]ZbK-;Vra_9AR=ElM=Gc6[HWB1\/'BTDT*S[EIpQ2J>(ZWH9)MuW=U"':]Ul3o4K[Te>#]Gs4lYId>jIba=`BWgjscgjcSUj?/7`ZOE+VY6'aQ>q.bj+(PTki3jb^M*R$Q7']DUmfF'^D9o6\]3Ll-mgW;'];k$DL9ZZ<;^pAmWdmj%0Kq_CsOYbuAg'l51-df;eNj'e-^_?fO*I)+m!nOMB(b'S1BN*g>W2DDpX?2fOdYA>lcG9:#4NeT%WQP7D"`R1aR[`=UT1dh>3PXI7'&%4V[#FK8eiZuB9-#cIc/eB25dbAiYP@FTHP+kH!e:='V[6Cq">X*R\/&4\BR0qJ_l3jR1AhMG6_ac*o6"C%8\S0"VV5r@ZCj43PFMePW\]n5'^6Q3+a'-B>ghHRFD4Gs)EtiEeBmZcVt+q2h08*>YGkAFm,+H9W.@PIj"3fs!LmS0Co;Fj&3N%EU"/H[t-C#oW1@n&FK\l5Nhg@GB(oIl;FST)0l$1u2JC]bu-`tPp2a&75Eo?a'e-='nH'[,jY2jOWQB3.9pjqF)@3aQu&t%TtC1ils_-6qm^[_?ELhQfhK6m_W!UJ>"X"tain8gSKQCB&ESY^;mM.lo<*?endstream +endobj +27 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 2646 +>> +stream +GauHM>BA<(&q6H[d;K=qM9s5)j\p:C_W1bk+I6E5d)2-`^^J"9*0.\q/I'J&(^4fgg:nr0g\]?9q^/2oUr-AM*gB]ubi?JD"S&rFUfCq2u^f9p7!top$3UiBQ7RH3M9-&j4"0adB;#,tJ0Q-7n:7_O9pb0G+CAs)RpCAe_&Gs72NZZd`r3R+\%-I-k#FcLhVFN@\npY>(f(YfP!hhm\q*EIL7$jG,\[LJ7#]+-r*%5r:*rVLi=7&s&?Sf!@0%J%R\u$V)0P(oa`)!,K2[ai9jmZ(Qo*9s.7)5NO;/0X6WPo+3*3uA=:?\scQZ`Id%lc^jE!#K/$a8ZhrW$n%i-M%hbe:SD[E`cGB[<%M_Nc+P&bgEhRVNm=dk]N\nDi_EHW_sgkR!i'IfqaGs.SmDhA+Z1,Ui2:uTIThR_76%2#<;M95CfRUb:lNITd\4[+=%o8n^g(&fm*S3VH82#+Bp\ZY:\-o]g[S>*8#7kA'a6rnX^2="hQ1pALDUI>hMTIo<,d3W+^K]tc5:Z7IIr="ld`5J&o/5<66D^-3Gi(CY`+1(b^L?5?Ysmu&J9+0I]dV[$&:\m5`g&2(GO?XW9WOo,?lKT:'>CRjQ^d=e2\WaF_.cp_nlbaq&ec`7tNiH2Jg>HN3_YD]t`QakRRn&F#S'cFY7Dst]unhm9jP')"hp1C`^(ebncM[$5+?/cn9/)/bA1N:SAiB!!&G5/LN#M/k`f=p6V>l,F'f56i),pqgZ)l9%0_9+F(RqjRW>0*!PYpJ5"232YOG(f4s0BelYie)ZSJ@(%UFlI@i]b65(an,BP&7`?XP'@@SMn!'!Oc7>Qk/Q\\d[0L*H+.@BF1jQ/htcD0SJ,:[$u-jP`Lt\e6q>lqOS+LCIidYfBm3D$!WB%mq\["XOV9k"ocg(]XQtjgKF^8AnK6i'n_?M:h,m4ar$U;M&Glm,sAX/D[?r]2^1B2E4LF)R3o`WmaLu!d[i9.Zba_dTNkrC<,kEkfUqGG=UtoZen`@T3_SZ3(ur?-3NmJ*E\QNnTKuD8MRb?'1i8dN=j_8Y7[,XJs>sp3jo9`#Fg,CRj-9hmm9*cNmT*7d6dbcp#[[Eco,ND-OV1jFB.;51^]'U.f[[gQp120r6LMZuEhNIQI+F>388<7^1BPc$a#`%28'hn(iVJK:1,3IR8@:#1qdm(=rQ`_St_kmSfU2:Y!_/EQ&")Aj<*GB7SG(=KEHWW-)35$.R=^-$6FB&U-;jhL&]`an`jXo`2NA(".KYcgX_:+T)btErjk-o3/?^sfGJ8\k?rQ]O5S]KTZoG9%V9,^@c6gt*Q#CEUDmpUN>O)]UC!TQQXds'\49J:FR^;KAIH;T`CIJ!X$6k7]?c94iSEgXRNmU:E=O)\Iq!TQQXe+^^B9J:FR^>JqT`-)7I9:]q`t=S-'q9!8-NPcq6nugnJ7&PDb&mCn:,XjJIOmsNmFb9?Xhdk.U:C*i1&(2]0nmM-7%1N-NAac>Ns"&4T[c=0,J;ODEan"AD^N(H\a"aA=@K0/;'i?m,-`9&iO5EG5c&'_e*;m%$_\[r).k")r`s+S[=mCYe,m,50,]J):`l.k+UgM:>SR?g[n@<88mo)=a<_5D#%!AUVpm'M*Hhg0Vkrl"aoU?s]70fltX*j3-t?9endstream +endobj +28 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 1599 +>> +stream +Gatm;8U&oY%)2=7i"e>\-aRjX9m)u&:Pn+6p$9F1L8&MH;5D(Jl-D":,_r0>=(u$6(RZD3%iF6B=9-Ap@=KXdJD\rIlAYce@D)i1AAY1DGgYC@54MpTS6+,*rg^]J@t']Q$o"7APL5R*tW/u!l957Bi49PIl2Yhm3*]j*.-iEjY,hR;)a"oN8d\q,',J&:<&lW\U@4Jc&A<_uiM6WUE=dA_VQ+&YpJYl5!qQNUe2b=G%G,<_+\,T36.d/-N\!,*59(Al:.Q!atY)RY/gD)"R^lNHZK3SZga?3kZ!otS[H]*stlMSNj!+i]/VdeqdoN8I,_U!JBhk%%F`7Yo=uF==_Z/u2rKKdMI&L$_P*:LCe]K^Xk#l?RLfp$j5@9nAqdY]=[oE5mS&k6'HF_hWijgSgEt+)O+o?YTphJjr.4]I*B.,(9[(#S),Q-]5S8[n&#m+\l!9]98JQ._\@]Z^:Z.Y/Y1'+7/2b)S4NH,(R]L2/-9^h-@?ZtGZp*p(5qut,qOb*L15FKMY!\oA(T>LYBC[^l:LKXe\BQ(P3/=e7Z961IDl[rXZMcsW=AN)U`^_M'%%+oCo,nICdq,*o0/V7?GTr3`P]4Ac>M*S6$IR].fa3VXg`]mrEKX<.6d*2ll"QIN^+p`:,XL\g6a9Kfq@DN@%u^mSW_?O"\L6Pgc`l3h`OF.-4$!B,G/ZE\:Rb[J:RWSm;SOAD1to8HK?U2%KRV37:f=AZ#81s&m(WWId[kkH=l@o9\n0Kc_TWV%N6E53YQfVlc*o&-pHU(B:jG/M5u.2-mC$6VE)Q:iW:%R$8(M<,e0dJP)QW8/GECg-f^t+5"88.AY"70&'iQ#0i>^oReQ%!%DtmW@Wc42pQE[,]t,t5-B5^WfJ8Es\VE>bV)ICUg`/.o3ZJ=K,4S,KL%d`E.'ld*klc6>!p=^-dbnS4V&s9Z2oIm.P4cu<1OZstm!]KFkTGVGi[MuJ;blZ44/Fh09VhmVE&ofJ1*\)nuRGrcYNU=#?%2VB.nO/NqqYcT#cl1nCB+83]k^!We*%h;h)@rCW$8B31GiskXL6eoYYld^RV!ggr;gc!t@JL&79oDKQn;\[2FP@hc<'0l+6c%XL4E7l:YA$A;88_I-hO!PFZg[$iD^(@'s06UJrQ*_Ve[;eu^Mg-%NPj*@L99DpBkQBN?P/f=DE-;(TV(qgTeniEQK'#]:+IMg2fYQZpW6CU!gfm.32Vl_PH$"S5724FY4u0$6(tUh\K3DP,I$,V^EJN)d7[n?%\.%4!UjWmQSs:O-8X4(LCaFh;,9"0fl&>)tu/5Vendstream +endobj +29 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 2991 +>> +stream +Gau0EgN)%.&q/A5oUD,6"9X_g0<*3K7s6L`:7QH+hQ8BEcn[..7?Ip1SnoJAg\3OL&ZNspWC\S"AV*0kU\g^r&#;bUTKY1]:gr1upfpq.H/r_Ia3uBa7\^a;aGkFG(XXs!K_S/ascs_MPKS*=*DU&KHAR63WDCYVX=@PoGhChi?RIR3^&JIs^REZEA0ep<;"uF;;"2-8"IC:THnrhcFn_Hf;IZ/,%`VC#S@(D=,^B-g(=]&Q*%6j=(i=r+S>d9[g7Rt:I$Y7]_X8SR%@7>0aX_'t2DJl<5&CfNH2$Tj'>(T,k.E*I]WS1iFXlT\9!S?DX@uZWFdRds\k#Fl[c&k3;q;,V?>"WoZ80NX3h&:K#$6]/6P+G$kur%`aELmZdI3%WV`]SnX>B)ncH;\C^t[TuGYY)@Ac95j<>UAVV1Ln!e1<(J(Bd7pY1m6$D2RC<1%_;#(.l:\`V9*5+LSQRjD9"F-(tPKNd.@bCN4AN/X$U7a5O-DROrf7H$4Z.9[Lg"fLY$,adm)<9C[oRM1i'qM.uY?@"Rph[@]D6jiFka8=tJ=1A#fqK^TKQ*7+,D_uJTj\7pCrS.&/^VI@>m4,G#e=d1"IQ1Hf.b>E5A#tpT#K(dDWi(a;"lF1$$;>8o7B4S57#X%oih6T`Q#!./=lFUq_>Vn.lUWJ'=fhJ`C%DEs'm_`h>62@ErQO&U`FQ13+`VAKacU0NLN&hB\Up<2f0VaM(a8@E91a3mPWHL.CrWpFl6Mu(ujU2F-.3I'@A-l\36lGaFOU^\(S.[F'=`Y/,3daFht$;*Z=$:]H/o7Y&&rY>*I;/ps'>r'+KaUW_H?(RG+fWr7]!FRL[,bqu8,`Y&AEeJq;T2/MaX6I3>:PFu6&TDgjSMm=uWkO\:h+6InWXt:nHELO*tEOE9?m*,TLkQk8$l::=tGJh>$P%C65g"X\HH,ijG)b=Djj3JlWXpb%"ddQpT!&"-Ug3/g7>Qr_-)rHR;]Nc^rMVgF_LD=8(KVnfGR4P\SrlTeqb\CDbq'Oq)&)78+eQipse$55RIl6iuhYdm-ifmb,X.JqX(fK-J,`?i'V(I:2%l$$)$SGkdEj)S.P<2$qhk(l@"kml8U`rS_AW:/@Hb^@7RPE!,T%uj\^AcsYl1UF^U!Q9\BeNTn)!J;h;Q'bm"o\)9/CSi(m$.c*6=4sUhZ/W6[e,JE3EUAZrKcUsl@?@;q?M1-db&@Vm1e`Zq]dU]C9Psek3lo[(GpK>Njru&d@k@4+a@MQDui.ZBlc7oa;O54bJ+rg.['Hc4WpMDSIX?`_qqro+b#$X4ZuosqKnD8Nd?)Ko=I+K;Z-7ZlJ6qB5KlnVNqd=a&%Sqt#C^Dd@a**p&NM*'9#BOS6"m&9iW3"09YGF*72AZ(L:t2\/]>R2G'+@fLfG"V*9R+.1>PPQ1PR+.0SPF.U<;DpH+%pLq@8@G2R8c?P?d_T6`Kj&0^\Qjm`:-c#&/ToE:2Fhc-/hD)8\8%a3HU!Rs7=-FeZpWN@*Qf/bTkr*taqejX8@5(,dGLd:?'hHnL)VnQomRfjMfpORZpWN@*Qf/bTkr+/AK1NFUMS>=Vejce9hfO3b4EBZEU7`3cjY9q<1jgCGNXTY+,g'JTG?@f4JAdP]Y7)RK-m5*N<*["hU(%:K0L3BU@7-R/Fds@[GAL3TBj";TT7g4CAom!+EUk%jOQt%63bFk?hfo1BVdhuLomC8gQF*^(]pkBMp^Dh]cO)^<7;Tblg<<>t*?.>7d1bG!+G"]9523(75`#u`$@sJdo7tS\n]N0+'jU6M8SCKtOLt:glq1]2T\26endstream +endobj +30 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 2901 +>> +stream +Gb".=bAu@Yn]n?%*)`N?UbQI8K81t(YUS7&<]4NGG&;*\!eHFA(C8B4BX@^7F:WoKSShQ5Ys>7OoRl41=7&loff[[MW6Fl2ud7:=E/(C#m=!qW7/_>rIVkrTrNpOp=Dl9+^,iroI>J@X*l*iq7R?bO0uI18,%q!bFXf*UC83iQlhqq80WGe^nGoDBa\l_K3.9^gH#4n'6b1:g7H]n"X7=T(Ws=M0k`WLZkGGs)Gq=R[D0TcV#`W.YFR2M5]OA$(,/\"_8KAsr(;VnE.S)MQU9(+0O^:?3r3\Je6fQGD8HmiscggBG:%1X;nZ:`bjWbCBaY#f0Lh&YBhp!lX2j.=m$p0I]0:&)]i89VEOSPR6.DK]MBq"%S'5,?u0mGp@8DG5T30-?MZfL4CeB_?+*WORb(i*]hO(b5\sHES!X.4Er'b+CpMm#EO["_9YABo@#!bJ<-['&KnY'C)8Pc[4s#FOSQV*Mq;l7q!YD3BJ\NP4E$2PYpiSpTVSC@rJ8=Q$u;[X,@72]AR1REl!`O3)R7nJ5>;qYAAY6p8)!,6%/>+,$!8N%pJHRKh7P^DaUJ9s*seq`;?cX9gF5eJ9J;=:Y!DT3/`md1'PWhA_QbO>2WsD76GQl0cu!n]haB=/5=n5AJ]>"6nl&'T-?o^K,/lm%&g;Xc:XPOsK]7*?GCeSN`k#3\E^k-/O&0]m0Y%?R@or;Q9>>qMa8RdEnF_kdENr7BW,D6WhA#g^feAgd#A?nrm#0,kK2,-8YD/J]&b4iWo_N+!b0);jObX?Xp=&b$Be,:(.!hC5RVfq_l#U`4SXgrcQV9/Xd;$2H(lc*(Xn/%8'IHXTOL+(AlNOs%>'Xkks$)*jCLlD[l@n;pHJQ@Q!3e7(3nWA'4Tl3tr.RA[)D4_.qEuJhpbfSc==+EOR6kdB=?fe'<0S!WQk/[lJ3$`s!6XGWO/e:ht5REiTlF+3"o3qmN?FoD^QJDI@6#BnS#Sg$k9a-UM74[P0LJ]kh+RB[br2OC$$ZKaIF-@IMT5?qQh6a9L'AT3AWr!P[aggB0D?ED(HfNecV=K`<%f-/Pr)WI_nsF9OL'NR"5#O.?r1Ek/.Jgj.V=`jZ(=B3*Z>1'=DL$C;#+j%KS6VqBYL;&i]F.M\G'0ZKm$?,2b"OSki6E^]K'sG"D'_#\j4+$)K4K(F',A_kFg#?k&@E8^B&]R59mqoSXfCTu<@8fbf2#"S$f;baFUK;#4&(Gd_7Z`J]QmJ9Cb00b=G;F+r*G*E-jFpNBPagu"S"mQ/djO6K$"TuQ`4P$(W$_Ob#]2%ShV@ee[o^5Uoq.6nE;8[RY8ZNpUh_.dOG!Y)&K9Q:3e3N]Ik-i(RJ(oANN`.2cF,BXEA9&^1*RF\61B%$j,lY^'7$TSXFYfdk$2Y-GDuND?j:$UGInf;k>_LF0;dU;?]03#39EJeQ@*;%hL0:`"omKasoQ,0gh9<.L?s=*QXNMfaSIdBXO`ifk:(]@lgeW%)amQ(n-_q^kM4Pr&GH6IlTFQR-m1UBR](E13A"&M!>?*-7F#4NdWpTeKLbh92G`ok<$3DKp`9nkASjIWO9*j9+esEZPSY*`s]OS/fQ^`b0o"([:k@;#l^0V8lMgAISb6R<)$C`26RY8)_2.o(68O7\imEZiCiHD$T!DZGh#hT#endstream +endobj +31 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 1112 +>> +stream +GasIf9lo&K%)(t.i"i5s5mVpqjC&Qng1GPu2X*]%fg@Bl/3E.8Z7FVmhd;JNC"[L(q-ja6O20cX80I\sinnJOE)j^8#6L&bb^_Nb-uS!lOoPZ]ruYKq\pJtBgR#KUf,ZESB&9oi6A,/`3NjSjLZ1B0DaGA;Z]*tHL"D)m]grh^s"@VR8kqHij?-PHcl&aK#i8&>F()U'+%d_`KlKkBb$'g(#*iY9OBc"mf^U/R\f,1!1(j$]+p)g<;C]/oNA>*`>b2UA9UP!LqO$eQZ\!+$4bM:^l/D!sp?Zn7?6VtYe/q(c5F!711u1F)Co;F1Qg8tHr4lL.qMW;Y!jj1oNk9@N*5ltd2n@c1k/TG]_+G!dU!['8*%l[AR8?a#p*/#->RY[KE\12[8o+f=^uSG-fT,)T3!FA*=GXFlL;1M.ZY[s*J+d1GPOOW+7pWBDA"f"-R@h]E?*!urUn]<9p#;aT&n)S~>endstream +endobj +32 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 2776 +>> +stream +Gb"/(968iW'#*s=oUa8PdUXC9%,`T_-..cubDp.lB'hl##_Z`upbEmcEnT?AD[*ugI#1PJhXVhU9-bG)4l&9W?[%P6EVp+:4.R$jNp4UIJqTri*Jo:M1k%m>`e.'>p5Q=1,#;i[*,u],1P+\.K[2>+4J^un15JuBL^iBQ'Tn?A$Gmp]nXP?oMcU_HF4#4!Zs5/fZpO1*2u9CR4I@G(9=bunCKfi+N8ht(GP(ZThLl+/DK2Z'09.=u#S/cM`+!L74b;F8iAR9*L8Jq5sn!iPMs(jHNh(VoLLj*mp46;oIdi'/C8BdZQZ%__V?E:;q7Ob8OMbm9tZGo8@Hdjp9O7X$Rc@fKJUGI[V)Hdmj6Q4B:)uXD52V@7=4_$!+:jma;[I%B&t3OFMNuQX:WO04qP:%NIuCJ8QaLb:TUg=Sr-V\Mh=Fci8mcNBLKWM:&B:m$U:Rm4-`D>n09[)EFXW;)]cSHFWVjh#oFi2opuR]Z7_H^4IMb5'DbEJUG&Uq:UCp=*.l\@N:Qd,S*!9E+S7<*_7.s?RMT\/=!q\*@hrJH0<"CAFmkLiGDgcIOojk$-q?+Y%2Af%!%Eup$XJkrd6AKBjY9MYAW1u,+l=5DdhA2$D?.6c^)%a%^fLZK+;A,JI+e[3J#/X%N6^BGoJH.c5\mtDR*a=0:*2aQb6?JN/h(k_\'8JGVF+UkH#2tj\*mG\$_"_R5IU@_ITOGo8JQ3A9^iM`Om`H:TiG.T(#>Sn[UmfHb^0-VigQ%!7aHN(^O'S1kA#*a7N^q/4]G=O:XLT@Y'ColEIuCI3S74c*\%Rn2#cmGG1TRD??T;eEn-bSe$-4L>ASJn'dgI"eR75X_S0hOS@c:[qNRkN0OGVn+iVFfng`\S=27E)^pSRL)/6^;K?Ub"qRt]TmcFZO$ke)'fTock>)>S(oP(pa2gn0!Q]##-2Y6.A3t*N=3mTh+J_6p"57X3("k4Z@gAD+%7DF\Be)'?^>PPXP8a`XNR8STMV#pP'#Ej-li67uEK/Mg9n.,@U'BVk1DT#DHWY?nHS`S!+5E4YL![cdkl/_5^#(H\#Ftm%~>endstream +endobj +33 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 2604 +>> +stream +Gb"/(968iI'#*[5oZbZ\JcHq/`uMP1QK'5h:@*g;XuZ8D;maFV7EU"&VY8X1#>bQ&7q/;qamLE1\JGhcPibi!X02Tm;tXNFLm<,q"cW=e82=_Ins*"W"Wboa/l&S6MV,`^[<*%[>n8'7:*6A-CM+^dR6R#R#$$&P0%^R8fdI!b1:jl4)'!Bqt_$\KkTN,Gg7@Z-R)q>k'k-YHs!.cDdn//C3?'D6#O(G+56`o5s2ubgH&A`r%Q";.iq*KEusH[=SAMG#DEO$W;Gl_@SIt3F.,/]cVo$o>#[qU.>V#+)seZmoO;?eRG8@hbAXdM$eVW-.bUDIRGkdR3*mmh3*q8:O>2@,]8&dEAE5ii'A1s-#O]86Aa&:VcL^b+@'&bW_S]cAiX!XEJlmr+4TjieRZN%ZZ>t_'A]#&!!$O"H#ip(U;V0k,!'b0o?u*D.IkdKZMCr+mPuuf?nFOTOKJ,?Frf9K8*>>85m,;p*K?ZTt3p)6^QjNBg"b5,Hs[X\K,[9/Pbegp?!\Wf2/"S=R.q-FTRu!5<=00(?,WNY0mT)/K,$,C3-8=>pXqoesI86\N!l9`)p8qgV?q>R[Y@#F2BqXd2b9*'^`jp)Q\.u;Y[d>lPEYY),nhZtR0%9AE__g+Wa!KFk9QGH>NKD@Ei3X+^VhD40H%RX"<2JlU[BkI.[B%?.$tPag)[ClN=r#UIs[B]rll'=ddJ>_i,cT7s0RZAjKmP.R-LuEVrRG:]7C1AO`.DYEi:Irnc"BZacrN0h[FjIbuC'7=`rZHWufJpoZW]:Plfcb.Dc=cJPTkj#?@&;969<%Va7rCmQItG*mA0h8:FD1M*9VM[g4k#Mr7OK;85@5"e*6C%0"X!=s-%CCZTL2gB..F.2R=j/-WC1o%kb?.h."=MY^DV6(ioUNh\c,i-,)B2#AIhl5+F_qX2J*qB?%#=c6H0XpWRmU,jrUI_E5&K7I9Zsfb!.mqZ=Cq^B`qWlcZ[BC0)$PS_@Z0T]TOjOBMr&nF1LL:.)$,',]WLE^:7qeB(9[f9.Z\p?fNLA.Y9/`hiHC9.Hi-^*2.828"l7-T`Uj_N:jr5X@+?aaAp64(!@H]/?Xqmhkl#UiC9U^#V-jTcHpbU;m1(t)q]L[Wi@fVOnN_dY-?CQ5h>+P=>Ptfa0Ye'lC*"2qp'IPKSVJ*E/-qBmMO6.(N4@$T"8#p;MNeiE*Mb4u?4FM=YPr)k9#0-IfHDZm#KkiXiV4IC"&Yc.d4a383:5rP9RF+Om78m9@,V;:=K=@n8)9n10^/C2Rlc_d2/#AB$4EiMbhb^dQ-AmRLJp.uQb_\@W#Vrug49%Onfg.nlG3=r@*L$J(VQuS\]^lE,7B6WKUD>Lh,g'\L=bVOhJht,%Qd[X^o$$a1^&2\rdbTJqI^Y#D[VMjWYFUufH'Lo4Ds,Z?@,L=??lfYlbruAKWI%OK:.Dk!(4+J9;='a_6+*VDOCllIQ.RJVn19a,0JC)!90J0S!47$6CrjW,>1i(K1[/WtX,(9?;hfJuLcfQ?m$T76q5,)srp;OD30Ae5phPs\f0J%t231231rG-5`.<`W)ZZAW(4)oof1+sO4?2%i=Xp@99WmfjT?Q7G,StjDW!0:34#l~>endstream +endobj +34 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 1814 +>> +stream +Gat=+a`?/p&A@Zc3erqFa+=='i1`i6P-nCeXN6\SWZ6,SB.u(]%QW[G<-%K;Vje&"8fk=%dPA]eqK:ikJqa8c5GJ+kg]4uj^l*776Gd1@688Y%[rAeF5(!6tOBt=Uc@S%8ILIc,R`?"h"tJ[7PkUsrH?9aSN!E2_11Is);uhgcln=CV*oFc(PTd\WdZjk2X\Dg5`Ru>PEd;d0Dt4-3eu"+p9^gH#4c""O]B%g6HiT(#Y]rWT34?1^YBd4H[N6^ScMI:F+mYYU=5@(*%lh^79R[9Fj>r0o"V;:+KKfP5qEHqNU&SOL_Z0"R[C4NbhD3l_6CU&1[qR/cjDgs7!b.?k-"^?W?.P0BaebLea*'PXuF82KamiRajSjNeVLi?[hcUZpb_goXs(]Skg2%GuqL9[?HrcYKDQ>)X2[:r68(\t@3M`fn%JJ#fU^c!Xn8QqUCa_U\>l^B"19Sq,g>5t_'%:fdHEg=]ED^&mJooigSCi]&R5C$"r:1dC6!EgR>>t**(Jc"QC*:-^@9l;?,`p`d?'7BTe`q?R[XFp5!Y.9Q.[E/juUpG7uCgGes,D[2/qqm:mMsPdQGS:2AN=ehOKD6K/kL'",t>nN%gLK",MLAH$@'d:pFBV2DIs"/R_7oQLSY/g?Id/QCc4L`rF+k,&m#gmWj-!"j)

L(aI*88OIO+\=0d%nT7To^`Ip!S/gqf[/a+WS/5,*BMnsl[$-KRhBdW:/u!uokse"UkLiLD;up5hEL;K6lV#?pQgF7)paK&`:6?fc1!p%3J?jWMWlMD_lm/M+-M"_jpL[A#A%'!LO##JLIIWlpBKC.NmLp^$%oa)1nUD8Gm)%CTeCFFL^f!T[a:$H"S/R/dMe4#Ude-lO#l^-<_6U`>IOIAaG]JbCrQ?o5k-GfOL<;+2//nqCiA:sYF0g@nP`0IaOZlL?#EmcZrFk!TdkmueikcbiUhop;88@;G%CAS7#s1SI2NJ;#;t>"5Vo.p7mM=]slij&X/i=?]noio"YG1OQEap5?6WmqpoOO2c<6pCnV=F[*<)1p-L/.4-oaI,*++5%J!8!\T`bbc&5Sp`TpC%ud7u=H0.iA[0RGe.Noo&V`NG:g)/-U]J:Tl)?6*#1HM23`L!6&k,ij-lUTi:Zo,3.!K5uD0L1>k?]"c!Dg`)mYZ:N$.n#ASVG(VRj*N_$dFTN8V\^#E1#iB9LD4D5`*KO5X0p'5bmuVHS$9RfR"Ps]srsH`)59sg+.CU[1C=4D*r.L4(J;.0XH7SG'roYp"9un<'UP1hfph<+SESL_^>Gng[,[9,?P\&$E_qEnfqJS^M)1oi&a3fFteh0]gD*O3c4/sJ!bpfqG?MH8":5endstream +endobj +35 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 2802 +>> +stream +Gb"/(cZe-R&\dS7QqO':h$=$HJj8t:h3XD?a_m[%[C'`[^2PORAkJ1@.=-'Xhqf6$"A-_DP^V<#*ZE(b"C_QkK:*8-5QWqE#kKu\"8oBR2a7W\&f.r!I-/?+*6o=`LIq@gU^*#$B0dMW0*W3gMT6=C#(FVqW:!2A[+[sMR#j')))9GJqu@LJQnI6e^V,@@.78@3A1J,aJ#hle]Kc9@bWf?;_b\7HY-tonZHDU@JisH&rA(q4+S[HhI"KX:,ob/04*oB_";8D01&@b6-K6/f8Dmu)6E,?S:&:IN6=BFeWZB\N.+8.X7g[&N7S4$41hB`395&WXEkql8GTCaO]R^0>CuB97MN_s5U^ZsA-XJP0g<,!!onn>J6k$'`__%jHEL\?XM?f/6=V:d6#3BJS5)GuA4]XqH&P-C_S4O]BkaR$.d(Fd?&SK=TO-U!bo;S(P\QdV4C#1r4`gRJmSlhem*,8FgV#Yf#31KT]cNeCQ".mh3\t<>W(Me0b%t1pYPk1pELrUj%J,Sml[Z#dT$aMkm7]9WsgXJlXNO;DBIc7"roQV,1hg(lK7J=Oic@bkI@"!%SBa$=,qc&>:JbIO(J;//CQkfoKPQCuP&Ugdnn\3cSX1o4'E^@rRk>oBe;N4Z@t5SQ0RO=me-6qj1&q^VNaoO,^m\\1dsXQu(_tLfo<9Thp*S'IGg-+2NaMK`C042>VN*FJ.O/BF,ERZ2Vp=DitG>&$p>$]3/Z&OMtJOmUEEEE`hu=(o[(>/uT$VOg#DD%pCB+.V1<4?-58l!H2=Dqq!m\kuK_X@,C<;^iC4k?@u"RUk%P"2G+C(5WM1t4:1FtAaB)u$QH0aeU2,sLZTk5JFb(WcB"o4'k,D`.f=ehr:/;^s23AsTsFO`e;O`g9,%O+30n4hY$_PIM`poL&uOOl"FHtI.'QY^lnL^ZXJDA?&OsSAk,TnnpaUJ*<2ZEQ/:<7jnBG*U>o%ZmID#@>l3q9S2+R,IO/I5O9^f!e2P9N,rACPtJ\._o1:qgS6m\M*Se1oXr`rh-o$7&d<+I%fXm/C(hCLUO:YarIN;%(4^M8X^n)SQfhuql*_$'+l-MIY%/B/pOa7'3i"W.b!:,Yd0PKG]s-;=AnHkNZ69*,[]UR31"ntUZL8Yd"Y(448l8tq2l#cfRW36`o>K@FTP"DN?:T6*_e@q;uf[jHgM8Q1F+Z0lc(fEJ2jNpX#eEM?5t4SU,,=GZ?7&;[4k1bcQF;jK6Lb#9?YT(B7fOJ8+klm,eRoI;:fCbYQ4niRe3CPXch9mo_>\oL>ig-_B^hB70M!_rWMD%3Z20O[UH\6A',3SlaoZ?UfE."MR/gOHcCZ_VYb@.aO#Pe7L29#YH_&6b?JX=hG&H"I[:C2B!\)eJZaTY&r]K0?H/LFoas:Cm;N8]6-O_K@PSR$N0<+\U_icg2q&JA5.f8^^;V?>d=W#ABiAWNlr$oc/DUe(\=)4X5TCF;JHn]@/.Y5$M(F"!aFSo`(JN0nGl/GIhX5s=a0Jkr\\1GIP"Du0D6bbKQA#@S6F3ST3LfPHlu17(1&,jC#rs.fjJ@-XHPkSP,8C#eeJ3buDMQ1BR<*u4;0V9[D&4$SMmlQ5U)["u07l6`4mW%s?ol$fT24+2Sj$3+t:,GGGmXmhiXcg\n$Du7M@TNkr(_IJuC9u1Z'+q(Eq@F^OaQOUf6,.#q:NH^^0UV"$GR'(:r5IY!b%%/*kbos'7%@`;IA6P74Ba3h]i!&AT'_D7+b6WGpYaZ8gKt`eK24:%QF]R![SF_].n:XPDN-pgtE[5qeXKfZM2"7HE.]J26G?l!VobXLR/Y;(FohY5C9j+-Lbcp$nHF%d"aEIOMk.o%^CX;O[2HM+pendstream +endobj +36 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 2545 +>> +stream +Gb"/'bAu@[&`*%/H>!)?1r9YTGdnBaFD8k.M<'H1X3*aJ(kcQ^+@+m/4'p]\cfkHb"=6[9;bjWTjV#PPFAMY!I[ks7#=$Z7:)674:?gtAP#O9O-0Y_sVWW%V*Sl]U:BGtV>.O-tcuC9CJZ#%e`2E&-N_e2q($*NKN3n[=Kqq&oHG8RkF@"sOnbM\ih'a#bgGYOtK`=bM2fs66GFDdL^S9VCqm:+dMTRE&=W/pklrF.\'bdRF%EY9UJjV0@&"E'1CaR_3>UFrr3;7QX?hXoe_.TkF1N5jflELY2_R,Fg?t?+Kr[Rbjd;pK=S(.,LcPbc:WgK9:NH`,Db#MdYTV8Q6l88Q:ek(fRWj,kC_"S4tuiRs0/%5>UJ,?EKEOWn0Yof>8@!)`4DO/k\`q3(\r8;,.9.cO67Lh&`-OjZQh)0-1E5\hc"#-pcZ&d=32':u719dge,$A(ULbJ7-G>*=gG&P4Dl[?^iRY,9d9XJF`,)-N@\]Z:P6Lo_mO]P\\#T9V[FpWCX[kLS)Apla%l07\q0\s"hp9*;jXe>cFVgQ<1JC02"#7ZQLS\O-e[an$lslp'iu"8a^tOugsZp*XEkS'ChoIrk&K=<-B\%b$GIf$K%.,9%g:3(.XL=GM&U)eKT&0T?3\tW?@,,(4emA,E&UeJ2%uZ5mU"D&tTS#KhqBGfCp%]I(j0V<,r#E0T8sGLGBWAaLU@4aVqf(VG+4H"H85`'[1+E+!hS+>h@NU)WCPlgI\&mgHK$n'Q>ig`H:tmbJ%%FEKROg:dpZ[^_=k>9I*ga(oG[`d;GO.%h]ZkI>DDH6Q5Xe;'P)k.]g2s)sn)]#6c/8DdmU'K'B*nG//(,8Jf1316IS1B]Zps?)(i>5.ZK4U4@e>.RVG5Y.'nCJS93(a3K5`WTF];Y2j"jMumsro@J1#2N6[7H&W#hHk0Y?C9VuP,t]g)TaW/d0jfPuq`@q)UPH06G`[daiO]+Xk6ffMFgr>]^mkK3p3a8GQIkj8'SZasomb]rkWYo_^]8'0VL]$E't:_eFTR]CPHd&s2X^m%I,;YR*\1JjfE25t9&D7M;ZC/+KdORD<)4X,ct=7>?1\-YG*fncN`P%rblMat-K8XuGoY=gk3APH>t$5M8G%L.PmQ>4cot<("#\-_oF]/m,*6"'TrE_8T6Q;HY'5.TcoCien6N&-G.Bf`H'chJCnAY=JCUsd9@sVn9bQ2t=AL/!\6-Yr6_r3QmV\sD-V:mcGj?@[DeQia>Nb4U.\!a>k;!co]L_XqXS/k43Wi#hJX/#L#D`+6O[g(mih;.6W^I2e1$jEVj"FBRlLs-i%XK3:2Y8V"!1m0%I,E9O.EZP7'OJ]=Us'0LqgJ(!;T,>Rf^naN?5N>::eb_CIc0;B(4XR/;I-^R=7hh"==>VGe(*+-lhteTd(+teq`(X#\@nRkiO_KTa3CVsYGge30(.GrVp:%LH+81)mQ$JS:(.s31:sKW"iEdBXC#N8rEtbQoo!Vk+"X_'D@r7dMn>qX]DqbZgQJP+f$^Y)?T&[JI#=!E$7?P"KJC,^Jasd%7#DdC2^:i(cOG+RncE/Hj_-gnHnbWl(JB1@!)%F)?nJY[aiMW_79=L)5c-OX6_CG_5?Pa:GI1tF988pSr!iqHBXNYmBa![)^7,!a'Loeu]8A0]X8<7?XW8Dn7UX#lLpLK)]2FGupoq-lW(8,+bHb=PmB*Ok\&u""&G0\-=fJV-G.9+(sj6I4]QqpMUo]d%Q4^KbqXF&:gO<\*P:X;:[U%_+$]U/"m<=,,&FIuT6>dLY@U0C[\^$CP'e*dGlZNOA!5ENtd3;^G[.Mbu=Osjmj.sj(dXjXg>jjth8o9u@JZ91(*SEC^0GYqM"3#D2kZNitq@ZUEdfm!:6pR7F`CsRMoM3e\(9?a!Y49B9A0t>jORrendstream +endobj +37 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 2655 +>> +stream +Gasaq>Beg[&q8H9R("JL$O4CncaJ0u3D%u5CI_ERp-C>g"j>-K7HVQ\s8C5n,Y6'ikW$"=&G'>m_dG/S!]^/brAR=LIbVa8-NQQNp&TikCtN(2a6hl#dD#/7Kl=u!)u/1qJ9eT@"!9a5gZ'n##8.S"\d09&V"?tLbd(O/Kl%1?m>&jq\$2(EK?n\Q=+L<$o5Y33o@Kh(HsGOs;VZ'W_?(U?3s_pcW\`igp$20R+=n[.-OP9-beFTI>NS+U\%"Ko^*bJ[U9j$)MOC?!A.N,7oaaK],SNiF]6Q`Z9t2j'UX;5$O8H/Oonli;h^q^p%&6a%(%Z>9)@%k2+fqHZ2^"VeYYjX>#pVma0]tVX*baFK\m-*pZ7q]1ZWn^kKgd`.d=ZS'm#;0o%I69k8t"<.=o#m[82>Mdd*(W,`u0[^VKs)lZTB"^p:NP!q?Rb5L9]oCoUFDW6p]Uq3e[XPE4[%;^g+-/9(O$Z35NK0f+*2arf>iV;PV1k!r0Ye/#Y^*o?P]5'$!\^%X1]UXs#VUh3k\@IYnM#X09J(T&[9NoO&cpY^#eH>(LhOG5tlPPjsb?__mO%`EK6`>TAuolT'A#!MjhMfH3aj=aEQJ$;9-2:NSD;c]st2`qg_C7:_92NYu;k7<"V@5FIao:ED=Lo_N5#-33o`6R6WPt)g.MR+eXO<4WE#?6ClQ#e?/(br^$-14Qr7B3+c^onl`i'28mbOM1`?I4@Oo[Tt_O*&:)':Wha".KFA:J:,As$imR0]0];21<+0ShaOdG?Ic#Q^Fl;<3(*N5J_q;)6"`9Qi"F32b"a,<)m2J_>&$NK3RoG:f"JC0(Uj8S0=sJ7[tQ>dVm^(_a-Q.7H!2PfX)+POC-Re0+q1sE>4u1P%\__"Mc.`7gRQ&W&O)[sB@/9Lii"\U5:>n(egtqoPO6:=90gPO;W\ppskIB00)"EY5hRfbEV=cO4@$[rI+np-kquUNT,YjY1WKBUGF;*mFKnUabtlPIe#:Ot#Q!PK[,faV=8t8S61?l3d4CUi*9'A8:YN,W""F_Aa8i`4Uu/1Ckka$*7O1,P@Spqe4-=W@!bhGe1dXc';?XkcE4C62,$]-rIPN1fu%R)!_@j+:Go?&QtT49<@UoOUZ/D2rKsC7>!SA:];b9A:U`T/d0cTn7BLCqh&G'%*GG,V'goc;F+ga^I[-rH]/kk[$Qr9rqIiZiiQbGY1W8s]LQpNb1R@1:EHKF$GphE$MM]g%-#O5"t=$EM3Z7f/@bLT48*^;^SXWf8Q3-?qDiVHin-gb[A6"K&#'1pJ2`U&q[grt6OS+slGS\r&oJD2h+urEZn'qp]LJ.b@^4>h)63kl@;@Qq@5UbQ;)e>39_?S9We/q.M)qS%ZS4.k6G6#hP8)Zi%hCWK6NnTKg=a'R+(7I!j$m%[SK0$`3^e5t\d1`AOP_65JZ?M6;[J`Z^pA+r4W>%pif4Y>+Zk*rr6#-Wrs'&))?K~>endstream +endobj +38 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 2227 +>> +stream +Gat=-?#SIU'Re<2\A0dTCMS[#84ir"3+bu$VV*4o5f.45I`pk^BsQLOW>f!NbAt+$&,0pKR]6mWIj-1-EqZ:(/)M(O+9_G&5"@%KWAi4h&'QLO=e5;<$i]7dNg+YCjDJ9@!&c#WBj)Ycbl2$Fcn!V:4`J$/`hN(K%Idoc7%4`E_.r'u^e&/EiGrm`W^nC(?irg%(^>d'U>(@efmaKndj@E2Ok+(eFbE020T_[W+)lJ5g(`3iKgf12.;Z@PBaK^jiXX#sP5D6kQG@&9jglp-X#tb/'$:=m#qG9IXM*\4mr[';k706TnCI+db6kLCb%(\^1MY#`iI*P5o/'+rLF$F8HrTf09Jb!`FM,#UaUrM/b%J^#lhm+:'2Y7ED#+6o]!9#Ug!n'`PC$NiP/G.2uu^@le:R7J"^r=m%27h7Jl,G2dtQZ_MksNYd7GA''&ZtK?tc4am-"s\&\57*ogjl[F5B,EW&%\Nrl%8Vm;AU'CRW%Y(b/o$Zms*Zf4[QFEt'^]f-@I6A,NPsdC9'?r9"8,5k:5Z%Pj.L^J%HLIM@%5iuTrko%D%3\b[4VdQ6^'DAW=#X-ADEZ,1ER*1d-M8VrpHOS.lb.LL((DdMU5jAuP@&7_B2eL:5-sQ>HlBLa09WHgHaD#@QQBJZm$Dk/Kl*7hA:uK"65Z`cB&mTl'h718M`KBFF.Y'?[b0g_A"PFkgdj[@>rVL,u#!+p?DIkgA51%f$GUJO)hGUJ/6IOrU(X,CUd?/aaqS%5Jq*Y>M*&/KEH-WLp?DO,N%4!.I*Y-Cj#jVf"B-a&`G:s_A85.jOgE_&jHFUbboK@Eauco4%p%!i+Jf7>1:E$=^I[oKf71#^Nd#PCTVmsI&^?._p"IT-_7h/[@H"+%%k,2_Sb=ua%=X<0;#CSCa*;1m)uJ[#o5.bj/(DUZ]c4FIHf@__U):sl7rW%5PG&H4(6fcYSq7T4W2ODQ6XO7mDQutc-d7]]h%o7'Q0&H]7Ce`('pN4h6]18T$?+=X7l;[fZ^]IRVHp)$3`4C^GC98dmQ[=KSMPWB@SC.V2027$`3ZZM5=$sphpQDBnm>bh>r1NZE\4Y5SI?FBC:UU1Oit]O3K_a6Uq)Fm%Ii/J1lT:thUn#c]eT^]+iP/,[HBjTP6(Cp4,@#G0t1U:TCR((7nQ44fa(,le\c![C*StX3K"T;qK<;N#$SD^RAR"m=9lWH\qIX%gea&btk7^.u`>]po:sgZt&rtKmAkj^SSVP\r1`Nqkga0lRp8;)3DNtGqK$:p=$Sl2rAFIMYO<(YMF!L+)ba8R%>Akendstream +endobj +39 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 955 +>> +stream +Gas1]9lJc?%))O>n@#]+=\4`dH^>l`g21MXA?/RL5VI_aZl0oGoga5\D]e'dZJ,e?j2dt:pW+`1*#Mtos3J.ST/*phk.h.2)rM>TA.,oiU?Cb0-MB*U?q6b7CmkFF;R&'PAdGr.L[.8$:]AL!\]3$tk[3iI.R(o_Ul/#"9_)j,GG2NW6I6F[g\`#[FVlQB%b[[iT5(:ACY>koh]]GA;N+%t[AnPT(IV4JEl/;apiL99_Z-u@@.=9H_cpt1Wp5OEm+T+$3F1'>(\Z2ud1+@9$D)PAqnBgXb_)q9WXGBGWAs?9-sZ#+DQ0SV71=1%EA#\Tj=_"H<*$c*$:<$b(3%(d(Jq>;jFb58Cf10XY\Tcf3pMhh76:cE*KK^AGm1;n``b[5H]EiF#]rgb)[70e1kb[Ns?=B41IEb-p$P8Dd8g>n()Ms*!K=!SA0(8WVueq0cF*H4j684QrW9OiJmS~>endstream +endobj +xref +0 40 +0000000000 65535 f +0000000061 00000 n +0000000133 00000 n +0000000240 00000 n +0000000352 00000 n +0000044252 00000 n +0000044623 00000 n +0000044738 00000 n +0000044848 00000 n +0000045116 00000 n +0000045321 00000 n +0000045527 00000 n +0000045605 00000 n +0000045811 00000 n +0000046017 00000 n +0000046223 00000 n +0000046429 00000 n +0000046635 00000 n +0000046841 00000 n +0000047047 00000 n +0000047253 00000 n +0000047459 00000 n +0000047665 00000 n +0000047871 00000 n +0000047941 00000 n +0000048222 00000 n +0000048376 00000 n +0000050145 00000 n +0000052883 00000 n +0000054574 00000 n +0000057657 00000 n +0000060650 00000 n +0000061854 00000 n +0000064722 00000 n +0000067418 00000 n +0000069324 00000 n +0000072218 00000 n +0000074855 00000 n +0000077602 00000 n +0000079921 00000 n +trailer +<< +/ID +[] +% ReportLab generated PDF document -- digest (opensource) + +/Info 24 0 R +/Root 23 0 R +/Size 40 +>> +startxref +80967 +%%EOF diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_hex_inverter_pcb_prototype_p1_rev2/guide_test_hex_inverter_vc23-1.pdf b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_hex_inverter_pcb_prototype_p1_rev2/guide_test_hex_inverter_vc23-1.pdf new file mode 100644 index 0000000..004da3f --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_hex_inverter_pcb_prototype_p1_rev2/guide_test_hex_inverter_vc23-1.pdf @@ -0,0 +1,416 @@ +%PDF-1.4 +% ReportLab Generated PDF document (opensource) +1 0 obj +<< +/F1 2 0 R /F2 3 0 R /F3 4 0 R /F4 8 0 R /F5 10 0 R +>> +endobj +2 0 obj +<< +/BaseFont /Helvetica /Encoding /WinAnsiEncoding /Name /F1 /Subtype /Type1 /Type /Font +>> +endobj +3 0 obj +<< +/BaseFont /Helvetica-Bold /Encoding /WinAnsiEncoding /Name /F2 /Subtype /Type1 /Type /Font +>> +endobj +4 0 obj +<< +/BaseFont /Helvetica-Oblique /Encoding /WinAnsiEncoding /Name /F3 /Subtype /Type1 /Type /Font +>> +endobj +5 0 obj +<< +/Contents 28 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 27 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +6 0 obj +<< +/Contents 29 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 27 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +7 0 obj +<< +/Contents 30 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 27 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +8 0 obj +<< +/BaseFont /Courier-Bold /Encoding /WinAnsiEncoding /Name /F4 /Subtype /Type1 /Type /Font +>> +endobj +9 0 obj +<< +/Contents 31 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 27 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +10 0 obj +<< +/BaseFont /Symbol /Name /F5 /Subtype /Type1 /Type /Font +>> +endobj +11 0 obj +<< +/Contents 32 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 27 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +12 0 obj +<< +/Contents 33 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 27 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +13 0 obj +<< +/Contents 34 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 27 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +14 0 obj +<< +/Contents 35 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 27 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +15 0 obj +<< +/Contents 36 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 27 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +16 0 obj +<< +/Contents 37 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 27 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +17 0 obj +<< +/Contents 38 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 27 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +18 0 obj +<< +/Contents 39 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 27 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +19 0 obj +<< +/Contents 40 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 27 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +20 0 obj +<< +/Contents 41 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 27 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +21 0 obj +<< +/Contents 42 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 27 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +22 0 obj +<< +/Contents 43 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 27 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +23 0 obj +<< +/Contents 44 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 27 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +24 0 obj +<< +/Contents 45 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 27 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +25 0 obj +<< +/PageMode /UseNone /Pages 27 0 R /Type /Catalog +>> +endobj +26 0 obj +<< +/Author (\(anonymous\)) /CreationDate (D:20260329135320+00'00') /Creator (\(unspecified\)) /Keywords () /ModDate (D:20260329135320+00'00') /Producer (ReportLab PDF Library - \(opensource\)) + /Subject (\(unspecified\)) /Title (\(anonymous\)) /Trapped /False +>> +endobj +27 0 obj +<< +/Count 18 /Kids [ 5 0 R 6 0 R 7 0 R 9 0 R 11 0 R 12 0 R 13 0 R 14 0 R 15 0 R 16 0 R + 17 0 R 18 0 R 19 0 R 20 0 R 21 0 R 22 0 R 23 0 R 24 0 R ] /Type /Pages +>> +endobj +28 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 3012 +>> +stream +Gb"/(968iI'#*[5oOVd-LCh*!DUf^>H(=5=1dG(UtEg/c4m;YIKZ6kiij^[Rp=J,kUZ,((.6J6-f:E?[Y=QsYEk9Z-c[r&UJ*:3OB3qS>Z_Z^Ku+"6QuLRE)5UNa$2"BnFuWQU3BCSHnDIdT0S>0ApOCo'OU2E$;'1fA#Sr"T6l;RhjkF?f7R":M&"@%33]ka0T[5qu"#.nHA!(_YbiSruLdtAQXf#a:'q*QP5@*8eS"hqqN2>n.8p0W&ZG6'Yla&?)8IO^\NpKYXfH)ZbHk_\UYB[rHf2SY/a+BXCuY-'SL$T@2L\4bnQ/Z;4XZ:^$r^`aCH#Mfi=6,?-n/!p<7(009nEdH2^`_pL$Uc1SkA$YkbEJIN-+Pc&'s(2R"G`#Wa$^ujI]DQ@nc'mX#$S'InmL)+11_Y<`'cC8Rt/P2).2d6D]Z!(JnTJ5EpXYrYBeQbP`#8cpWr&S'!B,=Zp3^W/OFp"/7G)f+:k*\!-CqX^Q3D\>P&UqJOHP^HHL#f'n0TM8AXfmn'3DpGJt>=BcDpK9$$2]U!hZ]rT\Z?4O'BO.jIaQrcuTTcp7c@BiWAf!X%cIA21D^Z-$t:q'kc`%Yr=?dlYquu!WV2q.#_YrF.WY+@8UC.rP2H9KcoMeO;]Q>@#VH<0Lcs&f^_>n@07atG2XV!Tf(n%fn[VaMARBZW=+da\(ojF9HQSa`[%7+B,_#u)<-"Nad4T\Rqc)*lb$!^o'K^O]4c\A`am8p)G?RG[.4"C$!\HIK_\I"/?6.LcC=+q)Y[,OEA!iY3ZQ"IBpc1?##U5`np4Nt%5N^C1_oS!VD+s+&&6B.PT0T?/Ui%o$Kh9U[W0F!<*eU->cfX%c%57S"aKeDi\ujtMA?s&VT:LSbuVej7C0R?VgmcM]36927d$34L?kML8Q0)7>S\W-@I=@Oj[e60`M]$>?Z5pr-D.8E"TS4;Qt=$gjiP=J`F:#?K6J1H4hOoTD,nIMe$k)iFte5fE2@8g(+2gU=+@5e*p+]K&K&c<#-m2#1,ZkHcV'`mMfkBB[pl?DA=pF-i.K!FE6Pc^3C#=Vf\a<>1i^E[`\edp3&P7oPh'P[LgCikp4`i"G5N<\dPqN]XU)3aHiqN\ik(]08!n]?"@BCUO!2R?]^J%,4&IFU!h:jX6l(+^8I;Cg=;\V6bmMJ`$Bl)i7K:G*+$?+%T6:j;3ZdZ?8e*/K,m&WupgIXhq-:IFdp&1luF$_Y0q7#)UNs3+dF-7M_X^R0'^&&m.C(,UG.)["u'04G#;fO8q;@Rc$0c9_1q(J>_EYVn!eW7nNjB8/j6FOEu6to4[`DDl!G'.l"aNKYIo1'Z.M[e(Gd>KLfpVp&Q$))OCaAP'1Zf'Ig"9pL$C&FLht-S:;()"dLK8AL9CUXGl8+:u;8;L+2.1+FL;M8Li*8qgT-U<`--9rB8@2M!7uV^+NgZiT@m.;mq4q67EuH0PApQNFY,bhO'!V[rL2GGZgLdmelV:KmJ:_,TlK2FdUGD5bYV*nX,`$#;H!c=o3`dI#6^##=@t$!d23NfGNr5ZD,^E9cG[%FM,NHIM^S!&B&_L&?4eI;nT!4!bpjJ]]4Ua0Om;G_-WAp(dc1o$Q),MH@=F'p5T]B\k^Wp8kL&fp\5d8,gp\gX#BLC@]V15s/0g`R38iLCe)Nj-cY7?3G:HV@YD^"O>.q&j]:&)YK/DiCaIrhQghnWE2lfSfkFp2[-Ju8LFkGM#UN!hEkP_5Z]Y0_fWt)%T-YIWE!0dEa710.6~>endstream +endobj +29 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 846 +>> +stream +Gatn%hf%6l&BE]"=5;QY8YpsRL;u,RgJ+*i/68A=@_!aoZZ5+Lg&Cmi33BK$h(6ON"VP525'PnrKE9&IKeY4]Y#DjA@DFju>@<$g8=/fhSc"ipG7qZa?Ih]L'ob&36qFUdFZ+CB^de.h'P+m?g+f,pct\eeh$7-7nE+E=oH(!THU%?c@adE:rLN"&hCn4N)ESY0&N+[5i5VonHI4M<%N][-C4"I/4)L$TF:m@SN*(20q[eqt5m]b&l'=J)WK2K-_+j5^NK+^"WR?GmoR6TMd3K7%km%7W+SK&pT#J_QgS&"B,S=?VRjok#sF'*!9_VNY2ZXpme$]X=:rld$VJHD*&k`30"6ac\B'W)UlK##Fh`,o/bX7YaJjm(BJLsLg)9%e()Oq3F=JCZ'?7nRZ'cUNC@TTGZQc5/IEJu]f?jSD+\U/#&:IpYinGF(3fM1M#j8i6r7k]B^.Ytla\pPd&kR!(,H."gN9;@N#-;:\^n?0Qt2s(q;aM_]]Yb!edJkJ6`fD/*opo5d[2U5*XCq3F)/C/=TQ3*Z,Lh;DPlAo.PK$+`W+WPQlRLkLJ@DWC#;""'fK(J=p#<0b5k"@FqQYBOmIp*>uk>Fq0(0XM0kcDG/#,dW\HSj4r\@6M,6KtHrg=pma[!)!^uRF7l"OQ~>endstream +endobj +30 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 2365 +>> +stream +Gatm<=]aCg&q9:V;/[V!K-JF'Qhte66Y=F[&e`X1'/.?2iZ,G`nO!$Ho9F-mD*k.gS9od(>Un:$>!?)O`/er2q1e+b28/upOj^VN,o))s3&EBbn/[4fN2X;I%;M-1PnIL>-_qCfKM`T6H:(3gPI$HKFJX+RJ+U^>-2_qpmH@@C5]<]MgN9lt2lF]7:'[p4fq"tt-*=r/qA7^H;dhMAQ"da-ENb%cnV^A9&B:T@;K9Y4cKL0N0RGi+a(_,:2R75-$`)8mZEo[`WGCoB#!R'1+.,%\h>RG"^4i5Oc=+&iLFnWCRZKjQPLMi[+RsPkoSFL>Khpj]1;&I$`f>$X6M?F5+-+dFcA978X>mZ1\AEh\6Ja&o*DEG40b[ZlCV^AkQcf@1,JZF4H0!hrs8JCKnE]/s1a.hbe9*1RZkg%rn6"1IA/D^:,nbb2KX!A=_9]H$;+s$?QA)(A_CG-e;L'i4'53/^PE#([?:C[!n9RSA@9GdmsXY5FBb/?LuGbHdDF`FL35+\ACYWg[12*/'`q5q^:4KAN75rOloV+)_D`nV]_qlV?>m\iau_AJNmSH!N3(N%_aJ0p"c0/rI9PUc3dp-Rq5hs*W^8dInGQB69h!m]*@7:EQUEesB)bh3BR=lk(M/HLH>Db2]m`fKO=(DZgf#_^"V,n1;dM:@JkfB;AT?U0Mq2Zb3&q3-lK'1Ek/*bL&;H^EU!.s`(23-,96oshATh@Sq!L`q#D\gq6BF:"R7Ae8%Umh+Qs:\UAM3Pjo'"1,nH0iOWDJG66TTZETJ4'Ts7d^H^g.sl-#BX?kIo\aKm.>VD\8\OfO3"`MmccH_1mWu9OU$@g*<&8Rj[G.BY>ijT9%4_?RR4fgJ4-abU!tlPN$13DKRm+;m\PJnXH*R$J7h*AVpaj/F/NFa.!8QPIM9BR$CH?ul5fYS!Z/^nL]E5hbQoXJ[c]T$X`LPmamFbWY"`O[tP?Ak\fYR3jaJB:'a"')?hCf4o=85kL%,EF^"ELOlt*CId\XouWH"CW%bOjI:C>fB(Q8&u3LU4sU.6PC-SGXq<$o9H5Q6jkI(P_JI;\DW)k,qi:F0d!JDYLQSBSQVObY.SdNP<6$iV_qi'SQR6[r'p_4N'W'qo?&4kBp+.CjS31N#6s]:_A!>oh#6#^C%kH,OI]:)L1Td\!-aGWfb+.BI'mHVE%f[p4e'iXLgp_^;Kl!,7*MCt4fqs`\fV*t8X2B6*$i:iKB2cdhm6l9U2!I#?MSQFR,'l'N&=WO$^jBpEnV8G,3+qCSFaY+g1A"1B(*e7)"?kaDsu:rcef9%G1I>bhI:FY9PWCs45W?#s137(h;PnbpeR\O)X5&nVr-0e_]H]dko1Zl(l,VuG+b"38a'H-bi@,:;kX4s@41og*69=^\lrjZjcd;R2;`Hh8FkqOuJejfpTInurPKT0aCN;*([UkbOU]S?ZHJK/)hU7b7\_YfLHZR&OgS4)*'j*b^<';;:p-:-L/Bq$1FkXCIZXQj,Y^=Ft#=t3T9unA@>TR\QLD+4?[])@(.]e\eGa/!&TWY3Lh1]9/?WgLp5kV2:1bCRRMp']@$E27jPJ#ufcE#+PbkR^;FdYBI$pLh-oaeh`2nA~>endstream +endobj +31 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 3384 +>> +stream +Gb"/(968iI'#*[5i$Ka[@gJ.raZ41&,NgrGX>@-4Qgl+6$AuC5LE_nQbl7J;)C.W6iPaElmV+.";eco(mLNY`\cKW0r"JdB=toYZ`I<7^R#l-l@3XV1>@"M#X4cZ=s%>mI6r)$M*-m"WGShh^NptOak\7L&6j#i\>meCM*C`^lg^eM"frAG+lk14PiV%a`NNWCGTjs'/hPCYCbOE(+IeH%QLZ_ma"8hptj\C+iuOIX!TC/_H]bAOAn8U&:R@COF$ktaG0)Iq^bS/C6,4,07FRbEM46'QR!f@AeS#)./Lb>U^uXbo]V-o#>^m,OYU>(a8qeBHngpA.!n)(0BYF;atkBWfe*6hIM=SG(sk7G/mLu4qVEe>L)K((9^\QP8fgp9m+0C8l-gBg@IE8aNCAlGDe"bl$\iI=Yh2aObo5O:C=)co7D]58X"R?9ju2!j`?XBRln1H/54mfbh]T][efL]k):lF]B5_k"WQMTiWj9S(%jkk2*kSf1q1WA6/B=2c>[6nc%CdrKI*^5Wca#uC'tk?!PN>r,Gd-V&@,DCCR5(AaZ"\2lg+Ns%d0TGB!NX3oi:N*3.T537X:]lfoaW]BR`=u6$4uQ'QJIq&F-Ms#)^9LkfR.sFc2Y!]iRsp6`.C,nO+]lbWUXpo'qVNW:WSOb]T^DY^PYE:2)nWoh$SR%UXFCFL9T?nsT&'Gm"hP9VKg']dlUL'1oAA\d"S/24qqoO.:CVoeBd["tuQl9p&tpDMQB..=+lAeK0d)V2Q4@F!A%5bO+uQCAHiJeS;kDTikiohCtt%AtfYjMi9K7`;u%-Vu9BB6"S%\?ce[UO7pErccCj/bs@T%J:_;T@.7.rRO_-/T@uP=l&.AZp`(8Vo0fK$(dUne*Y/kKekX1]V;L_6C#)lD6Vg/7.fF68YfRO*(OBC),Gr#UZ!*)AXJRX6/8Q_2`CXWB1U?BeVY5E(%Si,21sj+_roBms"fGuE\B-F>&A`6!g'YGn'1h+(qS-Gk-V.mq+=A*K)&++'Q;UWIfDhN:7RSqM#d;+Z!dY'eM!e&;?lraOE[JG\LB9R("B[$mJ-ZZKDAZ)%';"8kJ-KM8C`Hjm22VJ`M`"NiN$k'aAE)u))_c9#*,]Z.$+eE^a]jBVK;N/Y/@q`u'V7f<)=@NN^'>oP&iM.4]=:(:-l9=25nDa8&XbDEA7%XYF/10W-tZ;1>jmSJQ:%O]o*-S+EQAaR^qqJ*:g&a?+^3?_P<"EiW@Wci-p4#CJKRGAPK__<,jB!CP9H,[b1\Yo6kjU>jJ[G?oG3Oc:?2i.8($7Sdlaem&QW8`]Vj=YqUFGMn]3XmbkK9sHO2'caQne?2Dm7-_o(s&6;!kKapPrkX\l\FUBlnt9U$0c7R]7J:FRJ?FVp,O/;sR#I2u)?Jo.Fl7n$0,9LcpGR0K%mnfm31Bm\\NWGssH_77=[nZC[7;:2(Qklb3bfS3X[=+Zd35jVF$a-L82[+j.11#:3$f[h\QBd&f"(<7HN)C30(Y_T]O%61%]#Sjj16E,CI[snDYCp?8gI7L"-U4Xnm`X*u2&$ceD?I+F;5M$V9_4\nC^!.3RLRnro47l?``7Q=.^jH%Sb9uY9P[80cr&aiS-a^!i;a9&mM?u!B,Ntfh.j\\N,2j:^gf#f>GOn"=<:"fLcOa;C^tPjaJ3Ub5!A9K-;'4H+-Nn=eEc'I3C-PQOq:".UG5eu==Dp/T5(+hA.!#M.Pu/>mb0E([q\Yr%0l6]^i@=.3b5QA"T&4Wara&BFWZsp22fs_FT83dLJZco`qjP\4,jeDh^f$ii?)-5P1WM/uR\F.P4=i'Z2!:4KiS4a-d.O^-qe@3kD'`qgco*N\)AZ(caI&R-II#m[Ek."i1'*N20W:A[:q$f84n8chVaC`HdQ.k'6!%qb$&U+7*kRCOAJ0-]4m!hD3QWrsU2l?h&W\C:1T*fP+m_%'4t"1V_($gRQ9.g]rZ.7;p6\8#7Ise+SX(.l#uO7g@s:H8&l1%1#5s[.NG+VuKN\i;jh]7]h>M-`[e+nAqcHfTR*&m9/`p?BeG4u/3?(8H=0"gPE51`t-6$M)Q9uChnq_&DnA_6Y[Hh6\>f"83.(ACDT^d`LrV$#I/T!9hZjnqo?Yi."\h+=^8OYMiuq\)TfHZs@QG'L1F+Q_si@f)tM@=`h[6M^:U;Yf9C7K/@3b)OM;J+[Ae7(719T<(@LC-?9+haMj_VZQ\-3G!mE#EeW<\>l[3[.Ead->Bd1EI864;KdseX:7*C7j31&2Z"M`6Lq.k3pWa@2*ogk]8h@D%EL\p+@nN=m$UE3>-m+5u1C3G]N*+lHlt`f9\.OD543.0r`V[2tdmFElmQLVZ*ps=QKdE"sllk[G1&2%&Mg`_I%YnMCkm0s0A.Q0iOZ2;HN85I41T`#>s'-N;~>endstream +endobj +32 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 3052 +>> +stream +Gb"/(bBDZ!'&E:`@+Xcc#mS2SG)@8d1.NBG;-UBSL16ohk4$d\6ZM\iEsj6Z2VCiA+)=n;Z:)#i<##b=>IQl>"Fd0BS)fP,\7I=#9-tD.m[81-bI6$hVsWd0WdbZ.K@%cO+,.Rg(_9kI6m8_I)[N'9O#0,qg6IoXon/@*O?9W6qJ;Y-c1^`)ns8)^'sKW6]$h)f)I5;g?htH5\TlP&UFZ''lMT14pXZtO;)@YEg]#4$5EPPp#uAB?&\5q/Sg5,9pN`Ps(X>LQP^uV3j7KNnT4eI]/+p_IZ6e@GQ7Aa14h![]Id\%'i]Kl,q@csdG8AhSV'AdVR):i])Z's[grniN$Vjn$[IMFg)?c6_SWA9N)0-&dUZ@@PHK.F5')5V?B1gbOCgL2GSNAp7>>b$gOT\nFuIko6%66^CntAbCZl7@sR!EWcdKZKHDq[N6SUAdeVE=]H1KL^>?$p;c1hGFG>.5B-=V_*`ME39cruDISA-c9m?0g[[^#"VQ%g=:M25&u3=b^qk3!P%5\-rW7p+FVaM-%imAAS"&LOk)h:X>6#p-D8>iWukKtP21nn`1&QA&YTUE6:rdIZs,mp;W`atdYe+kDnN6qp/)@/N!phn:KHb*&r3u+qNK28R8I.S'k!<_h7VWSAi&%$57Fc]agLG92rr/)>19FJ3#gd(>O)F5949PWc.STO*lnL!!>_h.A3QIm>fXVjMV8O`#IYLLO.UNGQ]AoETe$NXDVF;7[%,i,81EdmI`Il#JUrZBB)\T@_nI[DpFdK@*Y1AAAXb9Cr2UA9T3`*B_>Ri'6"'gQ>rP$fE"fj$1qJma`eMj$+$%>VD1VoL.RJmZB6p`a(XC)K?`l+RB3*#iCoJ8`0gZc"Mat?b#C<:Ef)L*V??o?@iForBM4t>KmnuMoEk/$UH`%gF,p]OGQ.^J+*jhO@")nWVTVM"&-eF4'.p3HUaY`,SsYb]%a9Xt>Z6DXo<-QB#?1b'0VE`(!"dd[VZ]+/gIF)V+6kUsM'`7U%@nY[#1$qhUT3hW(\%klE&mX(lpCa(V/TZSQPRQAJSQ`F88GNa_BF#]E&T435mm\-rd,ah$/g=SH"-;D=2L3^4!5VP=i.?=Y*LK:FU-F&,1K-Hdlg5WQ>[4Y>-.aSOCDq\DQDoIW*G&r6JR%TRB]ng\2?mZ\D%)N`=a.gg*(#,+k9PhJB^>tbAa`bnoE@Pa*jI1M>I&l4fmfcpBtrrM*`8/.f>&ZIXfosT:%RnReA&(]i*N(E\`uQO\I$sFp$"[dI4mG/!BD1,?k@dc]4.H(r254=^.fn]4Ur'b!6cY#B['qI"$G6lDK?b-r*#Q?l\GrfG*RA(19P!3pgmRc:lRpZQ^::A!^V!1#)C3$@CV(Aeub;EZgT:>-Moms:mU6:f3mf(1M*fgK)LHZYRIooJ2X0&"9T3`*B_>SVpLrdH]BnQ%TK#)=mk3.rH)Ko"cORtWI>lUI@M5N6Ci%s@5r)W_B_4B0n(,prFRN)a]rT4A"95drqp5)3X;[fEb7=Mo%!&_gH2m?&pV5Ptb;mu9bu;orFH'%BYaD'X!E7QhQ4h;uM'WeYok1i,o/;UTN.UJ]a0`[!X!tj6AR!om*!\MdfQHhXNWT9qD$EAcH81LTdl2luI(dYuemB4T:u:tEc`(!lRRSJi^QJh"qH]aAoBqZ*3h!GbjX#=cU!WI&Tp*sXZN9NTd2"[.&b.qWT2PMq9q^:CLA8oV4i-NZ^03&pMD>hnd&6*:2LTU9;EGT[&<^=e7UhujH%,gh9`^oSlK0`\V_35kZKSnO;[b1'Y.?_M@B9D/JulK0~>endstream +endobj +33 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 4031 +>> +stream +Gb"/)968mu&\dj<+=G8M)^[h%&#YR?>OpK?acEj,Hq/!EeVZNi=YM#PlAg^_LMV+T?E_!phY8Fp(Q#![-r'U^ANUHfT-eeP@I-Lc\L.S98s_m60T$Mj'-;g((pVV[SZZ:*^:[q,;TA&t?efCNJ":I=p/ZZQ(Y)UCFLkoDB@"lLL/B&!Hd/94D"T;_rC"!$$fEoKuSM_n%79"a:1*i>-0+G,u#qNPa<2Eips56"b@OcXRZZ0c8@frM4)/Qno4WS>'6975;0c-G3q845FAf.RBY$%8se&<5u%&dA0q,?Cb%KJa.4PU?cNrj^PXidJpsOiE%K`KI#mCVngc$3I[4NMG*5t##;o1OS]="JhLmN@;`c#)$*o:1OMXOV-N[J2!n9>/nVa,b.K'SS5B/:YmE6L.XFM<2[#eKmm+@/Ba5Z.(NeW44$cC:oh"1iS.oa(%qE+1^`2N!#aM6'tr'@ZJh)9E'l0B^lbQ[4S7+6E`jSK*n&6uUH^rqPJaUm/@HcZ&D`1B,&^c.Ql9r#&OX=YCC_:k)hZQV"XMq_R`D=P"VYrd#5djrMrJrT`EOT\o38nbQn",)^X9iK/#?h'N_(]_i'[jAmYi-^CdTVJ/'^,Vut%p4o12j*Hp%!W=+ZpoNW,hif1+c[_U]c3!1Se(#K#cR"O(+,f=c4.7YXl1V%,%"@TT]MP=c+M`@\Y(/i;'r4:1k>?"1an3*VuT0mN`UA\e^a88]'B$2O\J9?QLgWoR71H"m]rSAcR=tg==fceIB<=#aEPO,c=\?_^IJUK,]CrdTj^\!P/nGpX1g&RnYpsPS0'eD,A*c`Z/c.SEaKd1c?[l6bS@uQt3QkLR))GLNnAs+%\+7lN.hL>6AnZNJl=2u2fE#P3XTlSN;'LaReH*q`S18sk^1ik2aplVPeCXPG6L)6SuA\71)?=fs+.;@\glF8l<&sm6@!b[_LXL^G'M<.h"DuD*-%3^cLe9ReM#QJfUO,]hP3h/b.hnV.l^]B#mZLrbI2APT4r9ufK0Gg6`Y=5]!/[3Mt.&K"'*\f9>?iXK4)H?4GcEo3L,ZLSt83])lbc!6JUTA"rX)>VkV^`(ksShl7Ck]a?U32Z`S,#%Kk./ZLlLP8-fB_H&!R$M(d!J/B.2+3XikI*P@ok;JQ.R8ggl1N0Dpt/S.t<>?^:EaXtb]@XU0cQ-Ybgb%Jn2s-O77*JVK%ANH:[2q;<9X2hmKcmr3q(aB4e.O`nR?@0OZkQ1DuXn2b30i@q/AsX/*UjP;&9L8S/(TI5-*MB:$N%M#NUdXb#8QfRV##HH2UH-mbU39u_lm'b7OdmW`ICY^,=RAje'#d./]j!IA4SC%[cNaQV,&J&=&[4hpXqmgPF@SutDZURrStu][jB_nrV@*TuS$\n(R))eG6iN7Sqq\!$#g^R_8C4qt&G+S+)cdnieuN:Ll(f?R9Zd@-E/YbsM.>+bV?_-<=m&XtNV\2GLq@`?H$@R#q8XmTIAf'MU=+6b"P3/R[t&B4l6%&B5a=fZ0";XG(1V2$gO983bRj7mXd6lL9[NP57/gr-0Q!7LB\nEJt1#;^t>.aTLG`342(CJbQ#JZ6$lEM<;15"RYDCC_Oo<"H6f%"kf*U:1l"8<_&]mK-muR5s&l*.75&Fmn^J_J4d^ETq->iY85X7GkMYk[9[3)L*pj@*M22>%_+Nl*M*[>`X[F*gOO4pgCGD!*7s-*>5Gu+=nac=/#_!]2g&HU,2^$t?^)&t$4"-Z)@M%u4lcI$OiJ8LmH?RTi@qlSDALIC"ZLNrhDq#<`,[WDJ[o$UrNdrXLKMal!)_e/[2>U1,;GCiV^S"_V,=WuaH.=&Ug?ehfn^Hd)0,>'fSYG"4[i@jMPCLRR`E^.8i5k50f+noD)$$gllgFHEu,ABL"#GKP&(J3^U'-/DGUk`T,;K;eXJ^+AfL]5N~>endstream +endobj +34 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 1377 +>> +stream +GasaobAu>s&A7Tbjq]8J&HKa*2m9nd[`XAMXj+s(((E?!;3\tRPM34t#&/ZgjOCc:&qg9>1YnF4;@pl=N5+J7k`7=/q]JF#g>7rg9[WQsrnM,CZ_nNW(L47%iuQH/0rm/*%\lme)f"j%!V,5V$Ght3Nhg0q1K:u)>m[gub?T>FD#X*G+j+'Q685J9%KG'u"2"52;5rC5O#1&l/N%m7-(/cUh3d9(F`rsCE2'1Cn>VI5"TdlEh-tI.Y'k2\-l_dR4jj]Zcie#\6Nj5\I&2n.9YeXAX7.e.A'i1.=&cn9jpr4AAPf:X(4kk-VqeXb3\O*W/@4H.c,S=*&/42cK%nIXf`;U,(t\pn;c5Fmqkc[,eUbmAn5,n]ZCHl6q$A'mN4m=X1f/]t6P:"CUr4*C3`:LJg(3*76eg"*d<#uD/i3[$IhF-YL3q/7*FXq$NUA\0E0i6tH9YRW"6_&-ST2%86(?=J%i=ELB;m!:EF4\sFObejb1&.\aF4PeBDRVkJO?On6bl9j%Z$9P0jm>&28KcPV?=gW&0=@0p4n_X3Sbh7&Fm]*j:_-TFRUj`r]2IV47I>B.moN8J#&W<[d+!fdBXWBaO+eG1J^:>9Ld08s@X)<\hf-#feN.rYdk(jk)fr@rRT!'p:`r]c-)\+`;ri(W7f?VK0TJSIRAe&BMehAP``h^TWqPR>`UsbP;HB<3[=OR"#9/\'2&^WupaekJ&_APs`NFg+5!FKotA1JCdhO[2.d\nheaiR++q55LHi3l3r^b/sVG\PJE!Q)9OOcFJ@!Bc/_Pi/`C.nBkAq(Q'0UMUtNYCUgmW"c(PY.R_82*1K'H47uHG=o=.t!">suLEGVuh2D&KrB9F3d=iR!ei]49e8$R[sATJMh@+IL:!o<`Y"hYtBFjY>3m(i?c4a^N]72hVj85U8OZ5*3kFu4N/J"_Jd(YTUF1V_XfAQ@?/.dl`)nnX&UNX`rn^S4&jSFYOLNU%rk^5?hcd00S=&OM\Q/2%U+@\C:>;9<.;[u;r'bf6SmBVJfJ6Q`-/0)c=IT&DQ,K+*Ir:hlYjUEY8ZG1*P%W%cGYqQ%86AX*,uijis2~>endstream +endobj +35 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 2579 +>> +stream +Gb"/(968iY%_h71i$N$Tm]`0s5,N')NpL;iQ%p#gI+!_7g,;kB.?gJR1V\B'1`moQa\m;G_cBLNA]`1$)Yb6G!&0QUr0-jKCe=826Ef9=P):T1,X(,6j?6dB#*4E58\bkRG$Xl?kdV4]^sc$mim[W'a/Aj,"_=`@8LZbd#YB`eomG)`ac],WZhJ+a1fZ#uG@`NgKV,Y$f(:WeN@r[-PHR\UkMt%_EOG*^^,Hb?U<-K*r5,@UNmJ-Q3g&#Yi^jKTZX6*mHS@AKU^VYMZpoOj2\;GW*2KBY32@b.)+DCO*(`fODCBU_j4gsF>n9+$P3-Rf2,[Tc)>Ol;`+'sCl8[n9dLAb:Dl'qIEQFUFqQ1qZ1:YJ947WMK(^sRCIUhs0/t']E,YRAN.8$pK(c#lqAa)6Ib@GHNNdfhpTB?K^>ed_.I?sNo(LTh:L*_+o,f1+.:@7ssoo9ZFN.TW/`.E[>#S+-aHA/Ht_V+E[(!5L/-BCPkQ(_mF@TuRdcPa-#nphgb/;N[5c$eAfJ9GWj&s.Yl]EPW5GbK>3\>3flFFR69p#uR+n"c^cQc1:DIcmh!=S2;eu3hhnIXpbeE&$_\-K$O6U_T\Tk['`g^R@]9&prd;BlEcLWi>q91U_mZ.6V6`#\e/d#pH:IJrhmg\`I9ka+ED,QTr_p8Zac>0IGi\0d.(Y>GB(I_Mn+micII];PIpOFi[6NLNg\$Ab0&G[Eg[b,c=>-]KCjRGq?\RKI[^j68P'6oLJ2guY+TuYBtpbcARW+Y&8\W*k4qq295rMqe>1nkkeN#biUT-.>W8@%QY.Gp@L!UP%:r__@/,)Y;D)AFM5BWEk#gbGH672?9[,NY3!Nh0QVVU!QkN[I)?OfH**Kj*bjq&KH5Ud;jKpD#!l;e3O+@BAil^`o3:q][`\L:29+K`_JDf]onXSMJX_G[9%?/_`t5A1AP00lrU&BKSF>7L"CL$OIS"=I$T,2)?%&%1SD[X1;Y]85bDUA@2n"0Yl3Nc3rc^Oka2Sq]@@0@hTl/8:o&bD)C;L5oYmoAK$9!M/DI=S[lf^0kRqE5rc=JR9g>(j"dgdfm-eKi8NikTPN_a'ue=9lPiS-O@2R%:^\Dm,DG64ML0a&TD%S:k>BB]EE2qJlb8+/X5+$Noorn/?NT:\JUhs?PEOTu#Y6#o=[IiJ[,0,`rGEt#413!en09@j'7fVKd63[u!@$.@g4+*>&;FG'>4ji7I4^#N3g5n";H&G*dk1!QVEqI=OG>#,OH$,X7qrocp,"L@4]oK55ADGTt#I#i_1bn;;fmtBs#+e+r'$=('8?oj`f)!u5$SC>0IiihH\[P.r+mTD9dlm+RRU5U&"F)$9KE'Qq>&9NRU0GOg"Cl4-R4Psqn-:EPp'fSd-.'lj:VP&<0Aq@B>cONH[=2C@cSb)*D.)*n=0b:sU/7jX8UL+PP?<>hLf-+:1DoQ8k[SEKUMF[R36.4AOV@^5.6J=3)g_>WhNG"@89h"s/kq,!O]0#mr;VBXMm\XTuh:0rum\XTug!j'FcDGceg!l>%cDGceg(Yb%m&\6^[sr33XrKMo=5L?7oJV-Sf-i(A^(ROC6i&(;lBCS(XR2?+*#c"H1'k%P1$G_U@!dirN!`tgkJbC>hi!=%ArXCJ$u)maD#c.D)\bBj@/e)''*,J#TuVU!pSKiobg^6metBBkH*8TeAnDs0H<>%q5pt3Y)6`O[2`J4OZ),g"2h?92sZu*]6,Q(BGA)o_qFp+.d`B-RTtA0BQm$G2%>%dCS5jrQK(VZ43?(2;>:>_UoZRG)!!EVg]kr*WL*M=n)#%"lp5in:G2'9NMi99O5%!Vb0&.LM2?#LlRqmJ&_E@CW*rSU0JhgpN2"<#U6CZ3l1.C5&L>/Bi!@$0*M(s7SiMi[O(HL:#6K<:XdR*/ar,iG03!a&0j[J%%Mb"rimcM>U;MYM5l<1q4kEuC8bh8+(K'+Ac~>endstream +endobj +36 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 926 +>> +stream +GasIfgJZc[&:Ml+CnJ3GW0/]7;Pu/Z>'aVe'Mk@l@Z2FA@QVXhmH8]T(tE424AMW5[!U*dg%C(#`J8TN=TNK1^rNVe(l./QQllHn$i#n/SnJ"]neX?WPLsOe)'DOBC,E)u:c&CNkT*cdc5@iN+=tg2C4@+#Of`r4SA$FI=0uXMFFC7lQQNDdsJh\#;[0ui_q2@l>1Fkc2Qk23DVD0>oPX,=*dR7iG%qdE&S_]qaYM>(+Un`lY7[RcrVEW"Hh$07`NR@m(@s1`TRMMX4"!CTY2qi-hR0@Ojc&jsi'+YlXT.?`1:biEa/]!h6a-KY=FE^$Xng#_il4[FifGQaM)@?]p1g_>1Xbg5\'q(6pKT#h,dX[8688cKFcg'G[uWkfLKkTW%Fh4VNpI*In@gq6A3u&8sNEt^hLO&*6KT]gBfg<#&]?IBC!3JdPA/u)'jp:AMGXlLj;0`DHGE*Fi=9+4pTiXq;iLD(d#1Y._#'\on.3np8)obdR%0Tg-]6sl`.X:SXi"`"]D`L+KLBBgF@oV[iI0Mlk>2Q38F/i:.,g`'&$TsCqOP)Xtll$F!oc:R5/R@5fZ;)@n\uCG@!3qNZN5BY*"#a\u9H?l(Q`b>VqNRl,(ko>B1Tl0J_7FRR$1C_.45L*)+b/GEBgsrYIJAXhR>Lmb,+OAC>`QD+m*UaM'_N]\r'/s6D:lKUU>oGrNe?/7^1$@endstream +endobj +37 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 2885 +>> +stream +Gb"/(968iW'#*s=oU\H`bmA!4_8D&1U8cf2/N\E$H-ukJ+9s>,V!q3dQi-RUH2n?ROtu,K3@C.mU=bjtf5uMkh2p^U8".37QK[G!IXWS7.U(_moRoa#\+IjiFuS`Y"T0CLFQ#``j$k9q:HMF0:YuO"T?8h"6$D%K'+(dO81G=VkBfCp[kqGFh_%.BPu7XrDR,arn6;ej:&dugUc68@>1RCZQ`J*eWa59@rfWFdT$dCY>5uP#7l%H'[SGmXA_]p5?8!M!4_Pd[;?f=7)Qc6;SdA,@bR2c^/5d)HN$@3bNhe7@2\\<+HqVZIoB[]Ld`_>a^Ir>c,Oq\_KHY#(BCBR.NY7A2!c'O9?c$7TKi7\Vm`-(nV_o?Sk*S]gCpLu;l"c[d#L2/'oPWd%JM2knckKHV?^a*[e#$q+V5W;Z6#UetQYCG,H/'(tjoV\8e!.#tdD?8M=3oN1=HMlC>\,dh"nN]rkSU:!*FItYm<9*S[iS$JK!J^.3qQam'(e3Ems7@?"Y7$B.klEIAX9XW\:Im7;S([!$(k4[QE`E!9YTu3H%Gh#aRO*-GfG_O(HJcoQnmL<,o^e8O2C&lg8I9Haq%VoLIA(GXWma4RS25+QmjVoPTaOj5hKSqG!q6"'EA=W[.%>fC':q0El'*DG.Pg:.*4"OOd+9k"&4WV:#^_fV=a>ARAK_rMqfG2aE!H\CW0D$Q@aOuT\"&KG94kXt_,^E^SqD$q1lcd6l4@rW5#M_:OaFl:NI8N%1*jsr*e!^O%KAd@*q=I5/ZAh8jo6e.Ork])B1s@Rn&DY#F-n.,o7KsY+G;_eMFi=(fXKB[StE)/tZ'XhHb2bjn(cn"uPbk*P;^8#"mTg@U=B])?JuD>PK:hi0+^^QZ(;-]?R3J^J>MDA_Z9'NfG9'\QSpCDX@Ts-4I5#di3HOTho;+%me)VL:^,oT.`"X#so/p+k"JJECpVRh#V06YX9i#BYMsb"kUSe5FGXmZu@-:?m_0DeFdA9P@a%b_@H\S?G0<28HuRR/Y?2)QKATlSO$ul9Xah>I'FXX5GJB1lt4!eFP5a'`_V,+*JUS8P:)SQQ&BY2n0O^#,'&pGRA\"Aaf+0P"2XCrAsVSk_GaWh`B_iq#l(>Le%nU=LQRd\C&+hH4nV[qeZgm_7t&C]l=*%C(_i.5\mCiInou]b>AJ)Rs!23'!rX;q^fqV]LD;b8be)+OBIQP@R4WB[afP(p$bD#'#B'r:?XO`--Qf`9g0jc"][+2T&3OK]S+"XEjd1V4aO?R_XPp>TG6q'QK;3H\c)9m[2!g`'EY-h'hb9/@1'Q=YX7_WJobcOBRjQE^kX5fBb58ii@FpuQ1OWJNr%%$cKa`)`citO4N@ZNh5RPH"HhGEpto!3N0F%@39ZQP>11B[dRR]lk4K=A50o;@=!h_H_s4)&2`Kp]%=eZe%6$%FAaj5sa!HmcR\K>c.4q2qhJC[3&Y4sJqZa3QADP^ISbntaDV:U:#MJOV8k\g)Io"M'>2#Wpr0TdBRPJtS*+Y8kdQB.EAJsdtRk3uFPu7KrMf"Y5(\-m0QMf<.,J*I@`?W6,KgM3ujo@WIa!VnUA#b3ji'5BN(KBbDD4EgL7Wd72SWuROn-Em%BJeRk&oIYk]!$[r[c@,f8fI=>e"[ci2u,BG\G%HXa6a-"Qo)7GJmh4H(+#t]1.(C7Bk.BMS0HNI`W6nK_<_AC2i_QmL$OISm.tjX.>J-=KfD3]RuWL0!jD"Z6XZ8&L1:GD\0U@V/95uQdPLBEDY:f\P$/'Fa_tMVa:jt[k6Rb;HA0ljp?@oMOV1Q+=>SW]=M;h>qXbO@[cod-o!-kZgnddL3G(pf\9rth3p9%4#.!0d%4t*Yl"nZ/5M>g?qtU-#D<%^lDS1NG5@`tH@#m]+>U!6jft7AGn5qU3\"bNu"!c*1S1*tPD0R,?n#]:"86'7klt:Q2rIg;YfJd^7s)oI%hufq>l-32$47`YSddLPT;V^\4Yo17rEno+<6L!B/3eq7Xgc;uj['V2b?l2&7[!n.^o[+jUCDU,U?odr(JJL#f+tus;Xo3aTU`Emkm/PP]C@_~>endstream +endobj +38 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 1416 +>> +stream +GasaogN)%.%"6`/i%7^%Ak5P,W&(!81u;arC"(WO5NP=rR8b20G'-C*Qi6U],`@u:FM6_QP!B!P!m#F6JE'.Ahq84l>lnZ*!ec6f*^mpj8?UqG,kr/A4H+iZ8Fb?l+1F7_YBiu;;840\6=`St>^4]]>%:$=:g&_11Y&7VDtZ8>\dkYa;lDi`HP!&4Rk:KKVBiVPGo+=N3n9MI?l["*91l6`Vb;%dm[EM3#m;q%3!hI6?u@lUO7IZe\I>IWV@A)9/f0,(_dbS/Z7ThXT.>SW5!0;IS<,hU`7?(H5/7o!Zc2Hs;p)8A#\4pg%(Ic5ucQ0ZL[)b2/Cf5if]W%ERS%mpk,M=F%+7g+_5+LG6?38[Y9hn8X\GEEhRRbDn4NhTRDC\f+\qTkp@;*%C5IDmqD<0tk/jmFL0[C,S-.m&(BWU\Or$mmP?l1Xn)n=)`(6;Bs;d7g#I:J:*9/2=[%dkm&KGYH<3)['h:#RC;<;OgU:kZ=^GZVhEYBk!L8ZcgR!bse_u.RG@[a$jFW70Kq7'*ZcY$)*3DNR3kirPLE=5$d:,m/?o6f(6u(akM+h:HF0h+.d$V7\MNgc=aYZ\:!R*#9q]=:VU('N"bq/OhU%P@SUbNaT5U9Z@a_S/Wu^VM'rH`9F$I],,:Qj]P@d:+Pj&R*[5+sCM?^&'rm@bK>klDJ[]&&rHTta2T8'0X9P:t)gYA4\HZ#OaUVm->7l+!DrZV[r.(4ZZhsM!++0`r)*+@o#@@Oq';7reJ8$O]$W,$NCSG`G`$>\VNr(^T*f9s<`FYhn-gKW=cEqA,R,6aGZG>4:aDg1tTLU?a"%JuR:O6^&OC?Y7T5@"N5YlaVBB:1u>3)HX775^H*A.-mQ"/RpfY+5D<51X8o"^lglAm?F6`>eUR*lT\,i:m9;W"fRM7,^?0GLE/EVi?GC:`fF$ooo+B./PEV[S_(f%V0EZJ)aJ*RWEA6'N;e;(DjoS>`WXYk7oY7lX>GY(37uL/!QQ]JE9$B=L,>ru/0V,4fa?$#8B/']TsY=s-&ukg`N?GBr#S?LPK5eujE>'5^Ms&Guoe;0j/~>endstream +endobj +39 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 2392 +>> +stream +Gb"/(8U&oK'#*[5e1F;-1]i11QbIag1=,2[gNoHL0/O-]m%Ht(MgIJ.Dk@O_#u[(P-lKuO5PpjHOf497^8cbgEVp+>2dI"90Bi'J5sj#ZNeG`+>+F'p@eONeh[.PeaN7Qr8)0#ZKtcPdKPTM$4J6G'(5Q;/j=sS26mO#>q10X7@R]n-dJ;09>tZ'`gGZ[oK\o8N%DC5?dJMoh=,jBHo]52aPO>E2a\p$aQaHO?(-`].',sQ\>9<[22BE"]PNQ("Pn.eC?\gBi=6oOugDNr^kH#d@+S3PJMDbLK-r$&I1%2M;(^WSN5q]_@)3g^J[3e%O^T-lSjug+_4[.jN[is$^2%'$iVnc(.h84SS!/=1qKgQH>_2sk5+r9,fnk-j."Bb'"jn3c,;-r?XH>q@5Y.-%q6;CORYO(Sa$:lYor\7;:"6($AF"Ma2_NOD'87UVHD1sJEiOE##%XlN,!`+HBiE_plXc68u=`4nSj`&p$']Bhur4O'H/8mL,\(L-m5EG#iT/>TPLds,jFNYPN=T5gr]>iQB,(q)'@\Wn\m)%+!qKuBX@Thh+u*)=&FY;a!BK2fmJ_jj'_pO]u[#1b9TKPM7]U`Dj9_]@)@f`iUYn9s([^nL+ZrhsL%FW-QNnN@BQTj5ZaWPQ@6W+#i*[B#.jV0*<)Tk2dF^(sLG+jFr0>q,ta9\YaN+es*;fA^r%p_^l!DI9KWl@$^@";oBGR;jFh/f$HIW%H5hXXOEuFoIH\Xe`KT7cEjl^EN9=TF5nmY'o-`9*s)A8cH=!ReSV5SXt8!*_?.r\iF>23SBEa;r9YI1X21_@-,cu(Fj]-(1hg_u^?YpfW";qGE4Tb.hYb'q&#EEo_LM98E-?;Sj=E(@s-r6!GBE''.MVPt-orP7.>tfSfiEn?krO7e>9s-MZ_*+;Amf4UiPZpu2024F&fp&/@S2Ht<'LR2a.h*P(,ISeHA(>]dg@qV:i6gTb+o%-H(uXUKe+!+E&l&d11AASW6%U8Hg/br!p0TX@8'F[@")b.flIe-)n^2HkIK'K*FEPX-4G"mQXI-PCt:`rq\h\E3C5DC:dddI0h#,:/*n'ZZISub\!ZCRO=_.V[Aj298rE8t]Pk-I$\K@6d$&YmFsHl.%@b:e\TVT*b0K6aQe^+n:.F2TMn2gHep0Y2P$9sR3GP@[dYZV3:(0hF7ZUsus*A-Ab?sJ-WO/Oo;$M'0%l$jOk-jYC_!"Blfc@m-WJ/b:=TPm2mCMJCd>Yp?9r8;.CBNW297I9If[=9Nmn/iNR?2FdN3^?r9`AFaD=VG1TI`5<^:89Sjq5=D[Jgq8*Ndq1f'rio\1-/:"`b\!od`'KTsH@UC<@:$:1ZCNfRLVTj0Eds#W=H#BgBbNGRg\=VCCY\`P%?oG[Eb?T7!^XkJ"DN5sgPiqmW8.jOE9^=d/%O<&>_W+it.U2gP4b>GQ=Lj%6rP*:.\NjDmP5$h>hEgC1Yrh'?rmR'_3d<:fjhKbGe1aG)c<-F0WD7m`R*WV_":TPa05b%qi(Ahd9[(r!N(8C$T'_K+`Q8ASG/q3].pDNS7Dn313h/M#Q_@:#u99h*8*A[AO70YP\:R6l&TA?A2P*5l[a#e#5d_8";)#]ohDsYjMIkO$ZeC*]5T6rm]~>endstream +endobj +40 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 2837 +>> +stream +Gatm<968iI'#*[5oOZ1fXGm3&^dkE5[N%;&AiDM;ClM6$ckM]uTh'kJ:GR_'p?`&UOL-:VR7]K%7'N:*)VpAg_!t4QcX[.IHjNS%"UGFX2$h/8/76;Qjm:0lHP=bad&f)g$FprR$^BdNLu5oR\.@[+@M#)PaWm[Z#XO3h;nhg2\UjSIr:TkC]U(C(QVG%HJH'@_eaU_/L#;G_;q@h!MoFAgU88;ELE/W\C\a.6Uc7*d'V'j;P*+Te:MXjpK+B2$3MZQ-?5*m"]dN$@Bf>egQN(G[#*I^bWZp$<].dd-UFNL3M"^c\AhbD>kl2N5>R?+2p_V0#PGBamO2rDqV0[G:46,JX1f)I(Hs`u'b\kcSXt%oJohN`Y(jrqQ2-ROc1PkKn6Ln=Z022dR;:`[GMcGnCcm5QY&t0fK7@MgiRU?&6Z(kj[oK10sj_ks]Vg^@oI#iXJjg&R@WSWdYcUb)S>I:0N^*r:]WD:gcPQJ-GB_8Nl&C1&aT[CHo+8G#8Tp-bD&"E,dW"i63o3!29E`/p^WJB9!9n9\M^"Ya:!S*S0YpMX2aCF/'-=Hjjos`:=?:pa_^o+6:HB@@^F\pRj1'C]3IuOY.$C5Wm"L>pecj&T_gM@p===#iP:6?c05.BhGTfBb";4#kR-0/a">k6@/!aH#9Z(_;%%-kO,5\FeLTr"aL!6fi-6.1bo!CPh_0_K6H(P^VT'2Yj@5^abFIq"gSr7BrP\$!E/JgW2'fn`igse49qU,'om"@smhkk(bk5kEcA'i+)26kSFr@R&T-D6Y7fMQ!!"G/n7-(eO[PO=u@YMN:lNT-@b@c8s>aSq$OU1aWWTcFa?`S%%P*bFqZ-t9(So0;Yl5>@MMO1Fhfeg"BTFE+?AVSD3ibtl6mW^-@Q&1nnhX&_KTjHIuKlnLkJ.s\%Io?HV9p;pY$pTf*3S+5B_77:dh:)U[M2A-%gJI_E`VK2!="fTTRTP0SLn`!b;PusT)`YC]DGSms&Kr6Q\=eR0?E[:D@S0%AnXCb-T^`g/_R:(^QKChMYk^<]i.T4i$338Fc`d=3_PZs]%3*]5gD&0]DVp^+p7ou1oM2*Pi'r0c*0E*5Ar<(u5?jI<_a0W8pnV<3c06M8$MU/2f&U%uO_72BR.,RVr0Lo%gQII)5,HT4rWV:,1#"b'c-0&[-41iFn"QerrTb;L'5R$Vh8C,0S,^J-T,q_o]WRZA7<12K&[t636uEGO^#bGhI\1pSpQ.pID9#'CRNq)JlBnMWl\Sje*>,iiT#_Yd&Wp:5M3+Wp0f%NIgbW3n$QI&Qj;oX9mgf$W$Eq+V6HcWZfh:6PhR5F8J6--PIB*60W_c[lZ+3_KCTmV;5V$FRPtT4VD%&Tr"F:/#Ckg]`-#Ef->'!!M7"rO1j%*d"/I7c->+u;3K\ch4D3YbqJCI4/J[E%Tc(+&*7]fYXF:q!%Riq"LqX;gI#>dTjgXY-RM5*g-@\Hfa1@CaW![$;8j5pbPG3ncl+XU:DdoiHg`lZ_>^Nir\jT.,BntHDd^eed^CPm.+DQIKnG4S,u^6;kTr4i'g+3F;LmU,*:OXb0E,\M\3,AB!\UY[nOdg]'"tb)HPK[d`s^`SZfjZ]mCCjZ)rCke*"D/;`QbDs,S\ie*CF$>HnE"3@%SJ(@=:Om"@@TIu[/78qpUZ/O<*Vq2`'i'39A$@A;VP>p_0r8DJ>H^47[4.9g9F1'%+;k7>jg%]J5Q"Cj<%^Wroe@(A,@Yn<(C7n4!:N'oj?1U%*K\'><=?@Dtq-IFe@@7N&^Xg\!6r3X?Sf-QE8B=joe#_n-0/,*G$Eb.fQFfo,g<9+[;'fq2!KPikJIVQ)VsS[LDrU[fK<-u^is^Y$XmjhL[$kqu!Z=494/&8gj>Rkk:N*D>a)g'"R'_ER"5Fr$4/,_ubOJ['(`*n;>K))h$]C'crkTrB`rpK!VoAofendstream +endobj +41 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 3657 +>> +stream +Gb"/)96].#(#J7X@+/W31e-sW#dU@6UeW;d*bWKVW9tuOL4X9>'P3Jm1Yq-$pB*s<+=106lZP-5%nTh=(Dlh`I8ZRhr8I)DHqh\SQfRfMS8^c[f7ZXN,0LAbQf[4Ud=7qY(Q#'=3),c6$.Y/IBnFqrdOZaHl%5a2$(_]j:`75L9U9I7\pSShjs0[IKI6/r`QAbiD,&KB+3h"MYLS9)>>p`pk@\_Z40Hcn`^$NlaRT^AIW)\+p.thEZ8A$DEAG%/iB?rJ"^Jo@Do/Aq?K;o+]qf*j.:!XQIZsOGPJ#6RUT2u,;kt%/I]2fq'%fP0*a=k(ecUC?6aeh:B'sC+Y"jJ9qjVD8HKgrO1Sa]'9r#dqZ?qLNW\<:#_?&-IJ:O/FXP0tA+$'?HXb-,VBXg.YN5="$Vj9p)9NAS_jfS%;eC1"A?GfX^F_udlAV+q@Il-^87oF(m&o$-\5cb=0(O=0GIsg_-0HXNRN])Tf59(K2Ip^cl_;No]-]2rHs!3^is.7*[cK]+,qS>I2W1BdO`=f)dk,,12P'Ji\)Z12-e9,5[f7l#`j>\E+SbIr8sTj7^6db2.*RbXV)`R6N8B?5R^oQ0!;rr:mao7*iHO&Z$l#$noi84g4J[ZY?$.6g&Q],P?,SqQRQQ4hST"(K_J?@0Z[ZLs$SVO%)ACRD"Z2jcRtUE/1_lIY";saR1!!gHi%&KW]4d8lJCl7U9W8oY.H2E(#*aX;N_(BkZo8M8f-HI9^D\C$g`I=r,cW\5)S,p)"Haa?nile9$0;Y=0,1]s5"X6pZbce#85Z?1.77E;Zb1_CC@V!&)8q[q.s?p&.Q0I.!-?)0,1AQ!n*Hfr@t\&[Of8B\kCm$#/970_"YJp#el92M<8g_I_6bMcTMFrIMV_X(a8ZGMK4Ec,ku@d.u)tt"ne#bp6njoV>"C_8-lKh,s3.C)"6h.&:30aS9*m!h@TO7pEcMoA#`uP@oMUA!U'dV.J2nNctd!#Hg!m$`An(9)"[kGN&*2>?:Y)IYVa:)LmVr%pL3MZ"PA&5cNPCr&J_S%+o$QmqQ"iN^?5s@pUi-b^(?+/9$b=J'QYHGNi+kaI<65IALb;4O;t(Gl?"(#Dr'<^VrZL4Ri9Q3YbBO);b3?X!ms.:i#MtdM+4a1%RqI+o!;qCp$GLm/pqngQn7204\4_ZlNPgO]9@td-nKd$c1s9-<[0Ln/,/E#mGV8Eg.ZK]m+mosh?&VlEa5-=k\9m'K`*EG\31B#VYoi[jH&DHWg%GU@E=l7r7=@^:X-!gQg=I,H['2.g>Oh!9]K&IuY\E[&/7%`AUdea8bd_FsVR!rCFXE8%@OFmJQTnhN"Rg9/-1ak(r=_naQE"`f@:e'D$YpN\.9\`GgTopuS6hS;%#p:<2QVe\$L^Y]nkHMIB3b=h)Og57](Oo:gY.a*9-E/j9pt%`KBd_R\35r8Ol@D1@1>\4>!EB!X,6VQc*UfD<(B^'W`7\nhdP\QaD+Rgr:g]$aSXgcJ[Iq*(d_c_Q[uH,m0Ku@pa/fJVRS).)&IUHr_55)m%Qne56/?VReBtJ9PknE-&gUc!DOfbaW`DZjn82#,uRoqh25SZme(')YqYP?ekCps4I(X5[R;As8R>YN5fWhoD\0/"AQDk+$_s/q(KoBGF/(7DU\#7DnXi@-Z'P_I(7@#rkoI_DBG!;D2PognF!3`o;.\aBp$qINK"o(r\\YD="?8QY3/OF#TG10Zhh\m&M=2ON<_i]Ct>ZBq)`'.)DqVi];mkL[:pPD(cJ,`&-,9rRscp3U+u[L3H"6/OY"r;'gRN])p.fhO5;:Jh![4@+l_LeWUJdI6?Lq5BUWPmb@;Vm0)M)gA^-G/)lDg\jJ=-=@[_9;FrRgg*.e\m!^R.7,!A*^2V@N??:HMKL7^S.>i!gq$T%4GiPXK#\-8V7TQ;77InbUX?$<`![TF1e7n2ZqDncId;iM3iU?lBhdYi>8%IhL=b@!DkJSUmHtE:!n2B1&\f!gRC3W-Ce(lP)jH6iS8'Y[T2Z$S$,OIRVL(q'TboH6G@m+?#T&!CM#c!pSk-eZN>=DI^rc&e#=8?r',C^r^U[W/4-EY4iFW+'Zoc)AMm:KM+TS'kZ4e2OUbtt`FTPiaA&d6AeekIDJ:s9&>>oR&W$C0RE5pRXEkSGXLd3]!.NT-;-;RHb,C$=ib&@ZW<^B4XI7cmNVhqN-9_D63T^Q!8r=29=[NW+.H-D:GCadN>lDiYQ`2G<$SX:BS'.'!L[/&7Rmn32/1^2mq1h_'pkfYP7O&rO+Y)\=.p3-pG4PDOX*H*%K-=l`.r"8q'="$X*:'V@#.2il)]=IuDRMh,P>o-V'\sKohR%KiN6cj_#Q04)LqCL>@fd,FA1N0X0"V>iUm_Z&Q@Ynk@Ta/qM>Ho%,QG[SOm\XXoq'[8T9hmdfPs^Q'^tn2T=b;L$Mi0P5FD`ZCK!/#'ZkIaEp)R#CLd'25Ycrg*<:4;\PrHg)PcTVRVsn(,Ng(i%i>2X,'RWl5,/4##O)%>>66\\']t4]IAkk.E@C`]<@j=)+j]B[#\l/:gTWV\+Xr9/YbIsendstream +endobj +42 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 1355 +>> +stream +Gb"/%95iiK&AJ$CbUq*a@JCB[C4R/QF`t(pZ;%b^Eq2Xr(l*fO&LD@EIV1'5G$_9]BhsG"aV[W+h[I8<3!)'g7(DA*^um_JHkdbLbjReb/;![XI$mbO-L6qM(n-GKEd\V(a#$;c+OR0J?iqs)e8)$5QMdE7VX*$i'+jn)0[`K\repD*-Lhl0S1e2EZ,M/M.6V#kL8hrdhrT`6].EnhbY2@jMuLH(Lj17u0'_KLfR`#Ln6n9pg[-P6uDj)9ETa9N.f$/t`?L%+>F@O1#+m-9n^]S(P"$]G1f$dQ#3Li\D1h&5G\eW!!rCV1)Gb%M:uiq'rZ-U$RMk4&)(^df+-4hca]NhF#cGgj'8F'F2%l>uBOfDX:,Y5Mgo;LOUO*gaIa#E;-0H3u-g&1s#u=8-p?ABu7l3,"/M?rY)/qFl,Mm=X[X.\X4-;Y&*HAhms9..eIe%6o2&u%Ek]j,kHiIa(&@65fm%24/V(@\GHS0.6hpH&'oIu_-Go_t$?9HC.ZNQ,4*"P%AZCU:9FG9"+=tnY?Rg89.H:K[J43t1dRjU>&fHN75UD7T8[YtePD#c!#VNSEaiqQUXf'RPM3h"->Kig@,tSH=-c)N#bSY9*i-QDBUMWC_H?tud5.UQ@V4u;ONPJI)\=eqW6Q=\:N'IOPNS[Mha=X2Nktpc)n8DkMr',*a48osq9B\c.ofoLX41@WW[=Fbb=LK0sKKWip7s37.Lq(tuLZ>YB,t(3VA$@\(NGhEQ:ADo!LKB%A69#5u,Su.+[K'`^7FDJ*\&+WO`up\e[(\!E1@&\1@WT(AU4g3anZ51gH[.\eUO>TjG1EaoXe.r#2f55n(9c4E_OU=&i*4gr/ZL_ro7IcUR8;YM^4e6g<2O'\GX2@%.G1aS\5;QfPtM:<]`B=k^UG.iiK2CD\;rmtpMj';L&f-XPSQgTKlQ#QC3QM"M`JoC-jl:kAP'99(as1uHA>lm(W;\dHd]"$H!EA9g0)O,25Lbr\R$%Pn9fp@@2_Ce(qRdHH_%F^BigZenPU+$E@0D,q@!BqKZ]0Rl-'0I&tRe]6VNX4_)nmc[J:1i]Vi\C'iRX=K`CS$lY3epFm3jS=LEo=Dl]1cF%-VQOUr$%6PCD6nt/iN,PchXoVBlg9#&ZIRE<-l>PI39)\P?T/:;I'*7Jma_UFg2O2En:uFBZ?;EA:R3t/iij2EK?(Nendstream +endobj +43 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 2861 +>> +stream +Gb"/(968iI'#*[5i+?QC5ld#)@qoe[*%.?%QEud1egFg<)KLq98=9u_Fq=E9q_^o2PV$*3t?:W>:c0NH,pbfm-S8*59&ItoHNgE*i4]!;T@`nM_r7+$=a[QqMkjB^g2e]CF'Xk&fu^'(pV&;bnk#ZB:mkb;DJ'NZaY\J[l$n'hO/DTc7g-L@#M4)nI$@%3C>;f/(/D2N/cn-K$RAl6V*]$;T9;3S^a9\RrQ^PSa-?":GAq&4D.YUo\,,GfCf$j03!$Pk$(#9FP+nAKN3Q(G^u`hM;4>]b)/TiCVfHlQ,1qEQ">cnYSlt#n%(\+p.dTo1QtrH7_pcDcPY;7Fp1m]RI]<2MGRTe(U,=Q>Hm68qc\+R0k6VqB\)"nC.Er&?EI8Rk;RNr>CP5P;4,5uZ21^2%"/85c4S/0J[1?MpBHq9nm9!SjH,6(.S<5A!E6!`X-B2('U$`pB1d4sAO=q%,B5uUR_Vf('M8aJ#7gor:dKOT]qGkWP)KJXCa&U*k,FSCW%C]ZIBEup3I/\j?9[tbLkf[Ua!pVM,S0c^r-9=b\kspfo9+GqO7g\/b?nX,qWU0$9J2mX"0RBI3q8.s1.^IX.]u5n_1P_:jKtXElX@j6@4e,@%q$ugA%g(c]IK9ADY3^nGCLkD$WF?2KnqrTT:VW6GOcHi+47DZHs9AMHg+7`@ZngHQu%=LQ;X9n5(JYH.=3QPC=o_F'1'Y>U0\:Tm'FBh\X1hAb=V]?_JK2hFg+ZXXep15/,L[4.Hsa!]JY,Fqs_WPPZlfsLR*(J)]5MmI01pdb'N^`dX76dueFb)Hb8,<6CEg[Gh2FY3K_[d3_E*V59F+&2R:L#E#8,JaFRhe1n\XIZ*RXmrZ,X55P\+ph=5T6)"Cn;C=oQ@"$r/s3@?).!t]t1V@LLd=0YK9LagOMm&>dZ[I.UCOG7:'E%atd-FX.*!X"\A$jl/[e1lsodtfAJlf[NGW9rE3WV:(Rf!UkYcJQ`Bk^\!=M@)]FPa-E%0EZ\==%>e$KfC^5s6lsP^T4BL\>rrig?bB'rk]uhQhbm:hpX$pfTo%Gp0$5r;CMqLdY`%PX]B+ge/'2Ro[S9$09pC7\qRoN0/u%;A\646:CEN(UM6gQ)7_>U@jHA9MN-NEO6i!G$8EN(dr]>J#YDtfGd$mHj_@u'.#2:+6K?;8LoUDXf/a!dZ.NtRcio=n.(?!SJ6Hp[As>>D<7C_)@dTm9AU*%&k@_VU^IL3?"#ElH/G#5FFmr<5^;$.?OUJfQ*-PjBsIc+9a8%nSp\qV3ZhQ6ta#gob2R\n\;>5O4l1h9-$ZL?J/ZrFTc-\sCI=Vp#d/Pmf&A\<41H=N&)+_([\BFSXHo.MHRkBTgJ.")$abFBbDasJ>^J$*Yp+c`$>U(*X$?>=9Hf(h&:"g0JV!c=>BD;n(=T%.f>]F,#:o[)Tg"^jL$pC3JBU[]:["gj)3!QGF1%lHcC:rjTkZV+@D4r.I'b$/5?kdIE.G^rQ5K0aiVr,UZOL\D@GF`Aj&H2:5Ell*"l8_[(O(#amR>^b5Sid+&6`iV\lTtS%^r#`%lQ9`;1I1__iXhuE^EZ&ErU.FK6T#gQf[65Q)GGdDr?\Kf*\C.sYZ!j/Vc[%A($D)fUsG@7hendstream +endobj +44 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 3029 +>> +stream +Gat=->?BT>&q9:V;/^R=J<8jhSt/#WVAV/B+[D^0T6N).!R>]>NA!urn$botjU9mAG#&1!A_!^,"LT*ejCR])hZ"HmSmATh?F]:Po]oa;ifUI9>rG\c2!][sN@]14YE[\lF:\CK8pSVtpUini'S"We?;\fu9t^FW3Oq&A\TRItdPK[/=SH:SP9[Ei3]c$-#L,=X6-H[>eE7!hVZaeor2Pb_*YH3I!aU84L,8-t5re"mj$G6KX!3^)>,PIdmS%l.>W?0BIIQ7"0eoibKlmFueeJ_?kb?Ds>NfiLj16^Qa6W+hLX9]8RS3V"&M4<-=WP2\k]>4BL'H4(""]iGtaKnN/=9B*/)2K?`Qt@0`qWYqX*NhJMd:]Ef>j;.);=-5X0`oE-Q4PL/3*dVCdu^;[KuH$Y\K.D.Pg_]MEUMFp1;?l,0OMo+:NVsm`_8IA0%EVW^O&(qG_m#.`o\h"bA(!,C#+*Nkj_0mZ*8:olsX+[Wc[1`#h\1ZeOWp>=/5S-IGP7DZ(cjKk3HMRg8l!HY\E_Y"rH6=Q`=k'PiFi;dE+LMmO5k]4V@>]qQ+*4*k-?-7.H$[qXgMV7mq]7!uOeDW@t4Z#Z^G+-LRihiFU.>u7A0uLaIQ:8?$4f05nZaOCssH2)o'+0R>65Sst8aMgb@QVGAZ'VPc8OcE!\m2WZ36*s.j/ri'HI'-)[6ndXrW@?KB,qOk;>PJm]5m)e@i.'0G0%lPt#!5W[F(]NG?2\S7T^NlaVa0g_(=\'rV:]2C;fl+#fHrg/p0-!hnK$`O2jIbgK2FnuFPB<<"`;9G,S!nJ/289O!X`5JQ+e>/!61-qe<>N`%_:>`/,0kS`o[Wg2$F`("hKu/G(glq?/?>S'*Vp-K+WoPgfEN:>UspD?(AYfR+Q4_8>cJUUTTJdhfNF^2X<9H/#k1b\4U4G6jpYT(cYU7NK,2'3\a*%=f7-jZ^H'XR.3-mEJ6J#/X)Ng1A[;-YeeS?1N4@(;XF*GKq,t`>%(:".4Q!ITJHZ$3d5AZ0QEn66e-c@&27G\r^N1+Aq_P<[1o*Oq,nkj#`XCeQAP3$;g=<+6P"GL4*$%EQeaCc_2C=FZ93rsRLC2RY7Z,+N%kMgP*&+`@A"ngQN'?V2qFK[=Um%ZT3Qa05&7/4]sVVB=.-AZa;JUZ-;$i"Zbc<=[qOU*h:>o_Bl/J2`<[(cH!)V=$=\:-;H*tR<]XGgM)'U+QQ,uS(1-"k\^Mrq:Fk22")Ftr+DgI"UN#Y7RR)`Kd&qmOTm]4f>$Yu?k:"\,i-<"OW(:2SB<0C:2NB\GP-F@Sm]o?Y\^\6XU568Z8f=qeaYci*m=brEh0Z*TQ+TD.FVZ?V6HSg"F7,AibbGIlh.^t?](DF`*">Ne/*oeI_h]=h.t-H-W!CM#>Vdrockk*Z]!\h>3Gj$(bhmU$:q\mSt)HITjj,4b!)mF>#8cd<37;8[!)oI.p#[C,jKQ[-b%_gFXp2"*qrVXlU8e;s9d9Qt,+ac,nV9M]:Xac)WZIG\X!W?:FRRF]SqOr8$_"hLVR6bPSQ0\`.?4=10Vf9=FrAC?fSm6\kRbe_JEZ9.tjKKbJM+FbHfb:CE@d:l0lFpe4H/6BfN;Aun_%;9c\VpLtF&)O`sq1m7<6Z\dG*rRdbYX;Om%EgW+8/0[PIn#2XB$>+!m;t8p/DjBSCijp8MTat)0J'NJ,I%$YHS"gbT>p\Jf'2iu2o17[%.7%bnn8%;k6C`+X\g8qd_8FBf>dYu1qfC#i2U(0b%DFbU0W1Oi,pc'H:jA;F;pL[V<%`YEot1Ueu-@HJ8&dM:NX@p;6]B(HuT6gU-(CnOSic+eZb[^&,,!b5rIZ"mhs2lM~>endstream +endobj +45 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 2627 +>> +stream +Gat=->ArQ1&q9SY(n`ijDbn63PUMAWd3<_E]02Y7fo9F5J7#[hP,QpMX%U#e&*LEo+XL!M2m-sA(L*YQ0)UGBOs:/FJ!g3WAH4rsi9CaR`aSN?bU"mCDW0d/m.77huRh&ch1\2_0gBRH[QDDc@'rl,hj1*[uRL-hSij[Qi&irlaVV;`T>@=7GWZY0sKRnXT!b#\&uDG6ZA!M8pBX^R1X2mM<)OmBVin>n#9)'ouFNt,2fY-%`6*qEJ`_?OuPX:OF_?P+p.CTA1?<[4s25dDiaWr64bJ,M-T%W_Yht*G9,i@5h(99p;ir#6bRf`EGUM[U*8hf$Q1_5O(gjmKHL\qt4(Ids16hD(ADRrCN2Xo(X&E>^jii4G;!r!#N78niM^O1M3FU1j#ZUE'.?'0kQ;MB6kj;P6QA%WJLKb>sRGofIuC`&u%/NQ1"R-i<)Y1"YRQZq&`b>and?_>ufIMtY[s%sK$<"@b,]ESB,c,.lMV];4[=QQ$$+&18$?AO+V[r]&2FcFA),5L+Y.fC"d]A!3"jo?JF"'5aZYAE\lParICiPe"+7\"@UUU;Mj$d.\e9J`EnN;"EWf_-"8"@?ERpG4&UrE_8UA/QAV>tiKoc!sVfdek>$]2E[Wu$-;:R!i8JjI7%mO6BWkghOlkj%g-a'Yq/6ZO^]\k^Nr["ak=@Q8HGtt@d:.HW+7h];:(f'=)9`4[V2HtS/"bT=69$utN_@mMTu&cSmZ:0O]8H2P4aORrb:.1G(Y!4@PsY,pj#?QeDE=\:?j2;NrYkcaFU@tQkE5"rE)5U/j,jDXW&WQ]12X7A2UkZ2(NjtqFq=N'MRZO+e;R&<:W4#>[N:&o&2n9&"CkmEPR&.'nPeZXJ(=o&ea`?j@<)BT1d:p!ksG^;/QI;lO]!PBZ)-&XKrEfTcVXKr=QZ^GtC2U$MRbLLO:H$@feems1>[6fb.W7QSJ1*85;Zr!@920Kjq^c:m/#g7.oHWW._:mjO`%c,f?NWS-mnV<.tf:8VXALb$sW,L0Lrt;B'U\n'2/(H>_a_)JW.g'qA+qtl=E-"1eoT`OVq!Q*3hfCb^fPUL^iW\4ijun/Z,V\_%-Y6%m1EU-\as*f*IUi&kJN]Dc7BqJ`D%a!H20GdQ;mq\ao.$'V:!_F3[\WTb2kSQODHRc+aLe\ESFY&=N2ie8Y5n`Mfe+G6jR?[+9Djm0L-g2F+Zbd1nrY'ncIfkTggr]E&bRm`f/H!V;?mEdatdHf)+;K8R&$D;aljH=!SZsmaJaa.*?D[f?W-JU"+j_,gaiJ;XLnukY[tD\[kYq[c_ej8,6"]^\cepQ)B)`mtuN2s_hWc-S*n<2t.aE;DQ=8dG-P=0P``Hb0ce\EeT^-EG\Goc)5eG>_ZTM8b0D.jjc-+qmZa)sVbi6"*;e`$n]iMafS/T@7@ebrI%T&]%8pAjL:]6Ys40[FU$]endstream +endobj +xref +0 46 +0000000000 65535 f +0000000061 00000 n +0000000133 00000 n +0000000240 00000 n +0000000352 00000 n +0000000467 00000 n +0000000672 00000 n +0000000877 00000 n +0000001082 00000 n +0000001192 00000 n +0000001397 00000 n +0000001475 00000 n +0000001681 00000 n +0000001887 00000 n +0000002093 00000 n +0000002299 00000 n +0000002505 00000 n +0000002711 00000 n +0000002917 00000 n +0000003123 00000 n +0000003329 00000 n +0000003535 00000 n +0000003741 00000 n +0000003947 00000 n +0000004153 00000 n +0000004359 00000 n +0000004429 00000 n +0000004710 00000 n +0000004890 00000 n +0000007994 00000 n +0000008931 00000 n +0000011388 00000 n +0000014864 00000 n +0000018008 00000 n +0000022131 00000 n +0000023600 00000 n +0000026271 00000 n +0000027288 00000 n +0000030265 00000 n +0000031773 00000 n +0000034257 00000 n +0000037186 00000 n +0000040935 00000 n +0000042382 00000 n +0000045335 00000 n +0000048456 00000 n +trailer +<< +/ID +[] +% ReportLab generated PDF document -- digest (opensource) + +/Info 26 0 R +/Root 25 0 R +/Size 46 +>> +startxref +51175 +%%EOF diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_hex_inverter_pcb_prototype_p1_rev2/guide_test_hex_inverter_vc23.pdf b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_hex_inverter_pcb_prototype_p1_rev2/guide_test_hex_inverter_vc23.pdf new file mode 100644 index 0000000..004da3f --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_hex_inverter_pcb_prototype_p1_rev2/guide_test_hex_inverter_vc23.pdf @@ -0,0 +1,416 @@ +%PDF-1.4 +% ReportLab Generated PDF document (opensource) +1 0 obj +<< +/F1 2 0 R /F2 3 0 R /F3 4 0 R /F4 8 0 R /F5 10 0 R +>> +endobj +2 0 obj +<< +/BaseFont /Helvetica /Encoding /WinAnsiEncoding /Name /F1 /Subtype /Type1 /Type /Font +>> +endobj +3 0 obj +<< +/BaseFont /Helvetica-Bold /Encoding /WinAnsiEncoding /Name /F2 /Subtype /Type1 /Type /Font +>> +endobj +4 0 obj +<< +/BaseFont /Helvetica-Oblique /Encoding /WinAnsiEncoding /Name /F3 /Subtype /Type1 /Type /Font +>> +endobj +5 0 obj +<< +/Contents 28 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 27 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +6 0 obj +<< +/Contents 29 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 27 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +7 0 obj +<< +/Contents 30 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 27 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +8 0 obj +<< +/BaseFont /Courier-Bold /Encoding /WinAnsiEncoding /Name /F4 /Subtype /Type1 /Type /Font +>> +endobj +9 0 obj +<< +/Contents 31 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 27 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +10 0 obj +<< +/BaseFont /Symbol /Name /F5 /Subtype /Type1 /Type /Font +>> +endobj +11 0 obj +<< +/Contents 32 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 27 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +12 0 obj +<< +/Contents 33 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 27 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +13 0 obj +<< +/Contents 34 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 27 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +14 0 obj +<< +/Contents 35 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 27 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +15 0 obj +<< +/Contents 36 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 27 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +16 0 obj +<< +/Contents 37 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 27 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +17 0 obj +<< +/Contents 38 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 27 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +18 0 obj +<< +/Contents 39 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 27 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +19 0 obj +<< +/Contents 40 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 27 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +20 0 obj +<< +/Contents 41 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 27 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +21 0 obj +<< +/Contents 42 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 27 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +22 0 obj +<< +/Contents 43 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 27 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +23 0 obj +<< +/Contents 44 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 27 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +24 0 obj +<< +/Contents 45 0 R /MediaBox [ 0 0 595.2756 841.8898 ] /Parent 27 0 R /Resources << +/Font 1 0 R /ProcSet [ /PDF /Text /ImageB /ImageC /ImageI ] +>> /Rotate 0 /Trans << + +>> + /Type /Page +>> +endobj +25 0 obj +<< +/PageMode /UseNone /Pages 27 0 R /Type /Catalog +>> +endobj +26 0 obj +<< +/Author (\(anonymous\)) /CreationDate (D:20260329135320+00'00') /Creator (\(unspecified\)) /Keywords () /ModDate (D:20260329135320+00'00') /Producer (ReportLab PDF Library - \(opensource\)) + /Subject (\(unspecified\)) /Title (\(anonymous\)) /Trapped /False +>> +endobj +27 0 obj +<< +/Count 18 /Kids [ 5 0 R 6 0 R 7 0 R 9 0 R 11 0 R 12 0 R 13 0 R 14 0 R 15 0 R 16 0 R + 17 0 R 18 0 R 19 0 R 20 0 R 21 0 R 22 0 R 23 0 R 24 0 R ] /Type /Pages +>> +endobj +28 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 3012 +>> +stream +Gb"/(968iI'#*[5oOVd-LCh*!DUf^>H(=5=1dG(UtEg/c4m;YIKZ6kiij^[Rp=J,kUZ,((.6J6-f:E?[Y=QsYEk9Z-c[r&UJ*:3OB3qS>Z_Z^Ku+"6QuLRE)5UNa$2"BnFuWQU3BCSHnDIdT0S>0ApOCo'OU2E$;'1fA#Sr"T6l;RhjkF?f7R":M&"@%33]ka0T[5qu"#.nHA!(_YbiSruLdtAQXf#a:'q*QP5@*8eS"hqqN2>n.8p0W&ZG6'Yla&?)8IO^\NpKYXfH)ZbHk_\UYB[rHf2SY/a+BXCuY-'SL$T@2L\4bnQ/Z;4XZ:^$r^`aCH#Mfi=6,?-n/!p<7(009nEdH2^`_pL$Uc1SkA$YkbEJIN-+Pc&'s(2R"G`#Wa$^ujI]DQ@nc'mX#$S'InmL)+11_Y<`'cC8Rt/P2).2d6D]Z!(JnTJ5EpXYrYBeQbP`#8cpWr&S'!B,=Zp3^W/OFp"/7G)f+:k*\!-CqX^Q3D\>P&UqJOHP^HHL#f'n0TM8AXfmn'3DpGJt>=BcDpK9$$2]U!hZ]rT\Z?4O'BO.jIaQrcuTTcp7c@BiWAf!X%cIA21D^Z-$t:q'kc`%Yr=?dlYquu!WV2q.#_YrF.WY+@8UC.rP2H9KcoMeO;]Q>@#VH<0Lcs&f^_>n@07atG2XV!Tf(n%fn[VaMARBZW=+da\(ojF9HQSa`[%7+B,_#u)<-"Nad4T\Rqc)*lb$!^o'K^O]4c\A`am8p)G?RG[.4"C$!\HIK_\I"/?6.LcC=+q)Y[,OEA!iY3ZQ"IBpc1?##U5`np4Nt%5N^C1_oS!VD+s+&&6B.PT0T?/Ui%o$Kh9U[W0F!<*eU->cfX%c%57S"aKeDi\ujtMA?s&VT:LSbuVej7C0R?VgmcM]36927d$34L?kML8Q0)7>S\W-@I=@Oj[e60`M]$>?Z5pr-D.8E"TS4;Qt=$gjiP=J`F:#?K6J1H4hOoTD,nIMe$k)iFte5fE2@8g(+2gU=+@5e*p+]K&K&c<#-m2#1,ZkHcV'`mMfkBB[pl?DA=pF-i.K!FE6Pc^3C#=Vf\a<>1i^E[`\edp3&P7oPh'P[LgCikp4`i"G5N<\dPqN]XU)3aHiqN\ik(]08!n]?"@BCUO!2R?]^J%,4&IFU!h:jX6l(+^8I;Cg=;\V6bmMJ`$Bl)i7K:G*+$?+%T6:j;3ZdZ?8e*/K,m&WupgIXhq-:IFdp&1luF$_Y0q7#)UNs3+dF-7M_X^R0'^&&m.C(,UG.)["u'04G#;fO8q;@Rc$0c9_1q(J>_EYVn!eW7nNjB8/j6FOEu6to4[`DDl!G'.l"aNKYIo1'Z.M[e(Gd>KLfpVp&Q$))OCaAP'1Zf'Ig"9pL$C&FLht-S:;()"dLK8AL9CUXGl8+:u;8;L+2.1+FL;M8Li*8qgT-U<`--9rB8@2M!7uV^+NgZiT@m.;mq4q67EuH0PApQNFY,bhO'!V[rL2GGZgLdmelV:KmJ:_,TlK2FdUGD5bYV*nX,`$#;H!c=o3`dI#6^##=@t$!d23NfGNr5ZD,^E9cG[%FM,NHIM^S!&B&_L&?4eI;nT!4!bpjJ]]4Ua0Om;G_-WAp(dc1o$Q),MH@=F'p5T]B\k^Wp8kL&fp\5d8,gp\gX#BLC@]V15s/0g`R38iLCe)Nj-cY7?3G:HV@YD^"O>.q&j]:&)YK/DiCaIrhQghnWE2lfSfkFp2[-Ju8LFkGM#UN!hEkP_5Z]Y0_fWt)%T-YIWE!0dEa710.6~>endstream +endobj +29 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 846 +>> +stream +Gatn%hf%6l&BE]"=5;QY8YpsRL;u,RgJ+*i/68A=@_!aoZZ5+Lg&Cmi33BK$h(6ON"VP525'PnrKE9&IKeY4]Y#DjA@DFju>@<$g8=/fhSc"ipG7qZa?Ih]L'ob&36qFUdFZ+CB^de.h'P+m?g+f,pct\eeh$7-7nE+E=oH(!THU%?c@adE:rLN"&hCn4N)ESY0&N+[5i5VonHI4M<%N][-C4"I/4)L$TF:m@SN*(20q[eqt5m]b&l'=J)WK2K-_+j5^NK+^"WR?GmoR6TMd3K7%km%7W+SK&pT#J_QgS&"B,S=?VRjok#sF'*!9_VNY2ZXpme$]X=:rld$VJHD*&k`30"6ac\B'W)UlK##Fh`,o/bX7YaJjm(BJLsLg)9%e()Oq3F=JCZ'?7nRZ'cUNC@TTGZQc5/IEJu]f?jSD+\U/#&:IpYinGF(3fM1M#j8i6r7k]B^.Ytla\pPd&kR!(,H."gN9;@N#-;:\^n?0Qt2s(q;aM_]]Yb!edJkJ6`fD/*opo5d[2U5*XCq3F)/C/=TQ3*Z,Lh;DPlAo.PK$+`W+WPQlRLkLJ@DWC#;""'fK(J=p#<0b5k"@FqQYBOmIp*>uk>Fq0(0XM0kcDG/#,dW\HSj4r\@6M,6KtHrg=pma[!)!^uRF7l"OQ~>endstream +endobj +30 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 2365 +>> +stream +Gatm<=]aCg&q9:V;/[V!K-JF'Qhte66Y=F[&e`X1'/.?2iZ,G`nO!$Ho9F-mD*k.gS9od(>Un:$>!?)O`/er2q1e+b28/upOj^VN,o))s3&EBbn/[4fN2X;I%;M-1PnIL>-_qCfKM`T6H:(3gPI$HKFJX+RJ+U^>-2_qpmH@@C5]<]MgN9lt2lF]7:'[p4fq"tt-*=r/qA7^H;dhMAQ"da-ENb%cnV^A9&B:T@;K9Y4cKL0N0RGi+a(_,:2R75-$`)8mZEo[`WGCoB#!R'1+.,%\h>RG"^4i5Oc=+&iLFnWCRZKjQPLMi[+RsPkoSFL>Khpj]1;&I$`f>$X6M?F5+-+dFcA978X>mZ1\AEh\6Ja&o*DEG40b[ZlCV^AkQcf@1,JZF4H0!hrs8JCKnE]/s1a.hbe9*1RZkg%rn6"1IA/D^:,nbb2KX!A=_9]H$;+s$?QA)(A_CG-e;L'i4'53/^PE#([?:C[!n9RSA@9GdmsXY5FBb/?LuGbHdDF`FL35+\ACYWg[12*/'`q5q^:4KAN75rOloV+)_D`nV]_qlV?>m\iau_AJNmSH!N3(N%_aJ0p"c0/rI9PUc3dp-Rq5hs*W^8dInGQB69h!m]*@7:EQUEesB)bh3BR=lk(M/HLH>Db2]m`fKO=(DZgf#_^"V,n1;dM:@JkfB;AT?U0Mq2Zb3&q3-lK'1Ek/*bL&;H^EU!.s`(23-,96oshATh@Sq!L`q#D\gq6BF:"R7Ae8%Umh+Qs:\UAM3Pjo'"1,nH0iOWDJG66TTZETJ4'Ts7d^H^g.sl-#BX?kIo\aKm.>VD\8\OfO3"`MmccH_1mWu9OU$@g*<&8Rj[G.BY>ijT9%4_?RR4fgJ4-abU!tlPN$13DKRm+;m\PJnXH*R$J7h*AVpaj/F/NFa.!8QPIM9BR$CH?ul5fYS!Z/^nL]E5hbQoXJ[c]T$X`LPmamFbWY"`O[tP?Ak\fYR3jaJB:'a"')?hCf4o=85kL%,EF^"ELOlt*CId\XouWH"CW%bOjI:C>fB(Q8&u3LU4sU.6PC-SGXq<$o9H5Q6jkI(P_JI;\DW)k,qi:F0d!JDYLQSBSQVObY.SdNP<6$iV_qi'SQR6[r'p_4N'W'qo?&4kBp+.CjS31N#6s]:_A!>oh#6#^C%kH,OI]:)L1Td\!-aGWfb+.BI'mHVE%f[p4e'iXLgp_^;Kl!,7*MCt4fqs`\fV*t8X2B6*$i:iKB2cdhm6l9U2!I#?MSQFR,'l'N&=WO$^jBpEnV8G,3+qCSFaY+g1A"1B(*e7)"?kaDsu:rcef9%G1I>bhI:FY9PWCs45W?#s137(h;PnbpeR\O)X5&nVr-0e_]H]dko1Zl(l,VuG+b"38a'H-bi@,:;kX4s@41og*69=^\lrjZjcd;R2;`Hh8FkqOuJejfpTInurPKT0aCN;*([UkbOU]S?ZHJK/)hU7b7\_YfLHZR&OgS4)*'j*b^<';;:p-:-L/Bq$1FkXCIZXQj,Y^=Ft#=t3T9unA@>TR\QLD+4?[])@(.]e\eGa/!&TWY3Lh1]9/?WgLp5kV2:1bCRRMp']@$E27jPJ#ufcE#+PbkR^;FdYBI$pLh-oaeh`2nA~>endstream +endobj +31 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 3384 +>> +stream +Gb"/(968iI'#*[5i$Ka[@gJ.raZ41&,NgrGX>@-4Qgl+6$AuC5LE_nQbl7J;)C.W6iPaElmV+.";eco(mLNY`\cKW0r"JdB=toYZ`I<7^R#l-l@3XV1>@"M#X4cZ=s%>mI6r)$M*-m"WGShh^NptOak\7L&6j#i\>meCM*C`^lg^eM"frAG+lk14PiV%a`NNWCGTjs'/hPCYCbOE(+IeH%QLZ_ma"8hptj\C+iuOIX!TC/_H]bAOAn8U&:R@COF$ktaG0)Iq^bS/C6,4,07FRbEM46'QR!f@AeS#)./Lb>U^uXbo]V-o#>^m,OYU>(a8qeBHngpA.!n)(0BYF;atkBWfe*6hIM=SG(sk7G/mLu4qVEe>L)K((9^\QP8fgp9m+0C8l-gBg@IE8aNCAlGDe"bl$\iI=Yh2aObo5O:C=)co7D]58X"R?9ju2!j`?XBRln1H/54mfbh]T][efL]k):lF]B5_k"WQMTiWj9S(%jkk2*kSf1q1WA6/B=2c>[6nc%CdrKI*^5Wca#uC'tk?!PN>r,Gd-V&@,DCCR5(AaZ"\2lg+Ns%d0TGB!NX3oi:N*3.T537X:]lfoaW]BR`=u6$4uQ'QJIq&F-Ms#)^9LkfR.sFc2Y!]iRsp6`.C,nO+]lbWUXpo'qVNW:WSOb]T^DY^PYE:2)nWoh$SR%UXFCFL9T?nsT&'Gm"hP9VKg']dlUL'1oAA\d"S/24qqoO.:CVoeBd["tuQl9p&tpDMQB..=+lAeK0d)V2Q4@F!A%5bO+uQCAHiJeS;kDTikiohCtt%AtfYjMi9K7`;u%-Vu9BB6"S%\?ce[UO7pErccCj/bs@T%J:_;T@.7.rRO_-/T@uP=l&.AZp`(8Vo0fK$(dUne*Y/kKekX1]V;L_6C#)lD6Vg/7.fF68YfRO*(OBC),Gr#UZ!*)AXJRX6/8Q_2`CXWB1U?BeVY5E(%Si,21sj+_roBms"fGuE\B-F>&A`6!g'YGn'1h+(qS-Gk-V.mq+=A*K)&++'Q;UWIfDhN:7RSqM#d;+Z!dY'eM!e&;?lraOE[JG\LB9R("B[$mJ-ZZKDAZ)%';"8kJ-KM8C`Hjm22VJ`M`"NiN$k'aAE)u))_c9#*,]Z.$+eE^a]jBVK;N/Y/@q`u'V7f<)=@NN^'>oP&iM.4]=:(:-l9=25nDa8&XbDEA7%XYF/10W-tZ;1>jmSJQ:%O]o*-S+EQAaR^qqJ*:g&a?+^3?_P<"EiW@Wci-p4#CJKRGAPK__<,jB!CP9H,[b1\Yo6kjU>jJ[G?oG3Oc:?2i.8($7Sdlaem&QW8`]Vj=YqUFGMn]3XmbkK9sHO2'caQne?2Dm7-_o(s&6;!kKapPrkX\l\FUBlnt9U$0c7R]7J:FRJ?FVp,O/;sR#I2u)?Jo.Fl7n$0,9LcpGR0K%mnfm31Bm\\NWGssH_77=[nZC[7;:2(Qklb3bfS3X[=+Zd35jVF$a-L82[+j.11#:3$f[h\QBd&f"(<7HN)C30(Y_T]O%61%]#Sjj16E,CI[snDYCp?8gI7L"-U4Xnm`X*u2&$ceD?I+F;5M$V9_4\nC^!.3RLRnro47l?``7Q=.^jH%Sb9uY9P[80cr&aiS-a^!i;a9&mM?u!B,Ntfh.j\\N,2j:^gf#f>GOn"=<:"fLcOa;C^tPjaJ3Ub5!A9K-;'4H+-Nn=eEc'I3C-PQOq:".UG5eu==Dp/T5(+hA.!#M.Pu/>mb0E([q\Yr%0l6]^i@=.3b5QA"T&4Wara&BFWZsp22fs_FT83dLJZco`qjP\4,jeDh^f$ii?)-5P1WM/uR\F.P4=i'Z2!:4KiS4a-d.O^-qe@3kD'`qgco*N\)AZ(caI&R-II#m[Ek."i1'*N20W:A[:q$f84n8chVaC`HdQ.k'6!%qb$&U+7*kRCOAJ0-]4m!hD3QWrsU2l?h&W\C:1T*fP+m_%'4t"1V_($gRQ9.g]rZ.7;p6\8#7Ise+SX(.l#uO7g@s:H8&l1%1#5s[.NG+VuKN\i;jh]7]h>M-`[e+nAqcHfTR*&m9/`p?BeG4u/3?(8H=0"gPE51`t-6$M)Q9uChnq_&DnA_6Y[Hh6\>f"83.(ACDT^d`LrV$#I/T!9hZjnqo?Yi."\h+=^8OYMiuq\)TfHZs@QG'L1F+Q_si@f)tM@=`h[6M^:U;Yf9C7K/@3b)OM;J+[Ae7(719T<(@LC-?9+haMj_VZQ\-3G!mE#EeW<\>l[3[.Ead->Bd1EI864;KdseX:7*C7j31&2Z"M`6Lq.k3pWa@2*ogk]8h@D%EL\p+@nN=m$UE3>-m+5u1C3G]N*+lHlt`f9\.OD543.0r`V[2tdmFElmQLVZ*ps=QKdE"sllk[G1&2%&Mg`_I%YnMCkm0s0A.Q0iOZ2;HN85I41T`#>s'-N;~>endstream +endobj +32 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 3052 +>> +stream +Gb"/(bBDZ!'&E:`@+Xcc#mS2SG)@8d1.NBG;-UBSL16ohk4$d\6ZM\iEsj6Z2VCiA+)=n;Z:)#i<##b=>IQl>"Fd0BS)fP,\7I=#9-tD.m[81-bI6$hVsWd0WdbZ.K@%cO+,.Rg(_9kI6m8_I)[N'9O#0,qg6IoXon/@*O?9W6qJ;Y-c1^`)ns8)^'sKW6]$h)f)I5;g?htH5\TlP&UFZ''lMT14pXZtO;)@YEg]#4$5EPPp#uAB?&\5q/Sg5,9pN`Ps(X>LQP^uV3j7KNnT4eI]/+p_IZ6e@GQ7Aa14h![]Id\%'i]Kl,q@csdG8AhSV'AdVR):i])Z's[grniN$Vjn$[IMFg)?c6_SWA9N)0-&dUZ@@PHK.F5')5V?B1gbOCgL2GSNAp7>>b$gOT\nFuIko6%66^CntAbCZl7@sR!EWcdKZKHDq[N6SUAdeVE=]H1KL^>?$p;c1hGFG>.5B-=V_*`ME39cruDISA-c9m?0g[[^#"VQ%g=:M25&u3=b^qk3!P%5\-rW7p+FVaM-%imAAS"&LOk)h:X>6#p-D8>iWukKtP21nn`1&QA&YTUE6:rdIZs,mp;W`atdYe+kDnN6qp/)@/N!phn:KHb*&r3u+qNK28R8I.S'k!<_h7VWSAi&%$57Fc]agLG92rr/)>19FJ3#gd(>O)F5949PWc.STO*lnL!!>_h.A3QIm>fXVjMV8O`#IYLLO.UNGQ]AoETe$NXDVF;7[%,i,81EdmI`Il#JUrZBB)\T@_nI[DpFdK@*Y1AAAXb9Cr2UA9T3`*B_>Ri'6"'gQ>rP$fE"fj$1qJma`eMj$+$%>VD1VoL.RJmZB6p`a(XC)K?`l+RB3*#iCoJ8`0gZc"Mat?b#C<:Ef)L*V??o?@iForBM4t>KmnuMoEk/$UH`%gF,p]OGQ.^J+*jhO@")nWVTVM"&-eF4'.p3HUaY`,SsYb]%a9Xt>Z6DXo<-QB#?1b'0VE`(!"dd[VZ]+/gIF)V+6kUsM'`7U%@nY[#1$qhUT3hW(\%klE&mX(lpCa(V/TZSQPRQAJSQ`F88GNa_BF#]E&T435mm\-rd,ah$/g=SH"-;D=2L3^4!5VP=i.?=Y*LK:FU-F&,1K-Hdlg5WQ>[4Y>-.aSOCDq\DQDoIW*G&r6JR%TRB]ng\2?mZ\D%)N`=a.gg*(#,+k9PhJB^>tbAa`bnoE@Pa*jI1M>I&l4fmfcpBtrrM*`8/.f>&ZIXfosT:%RnReA&(]i*N(E\`uQO\I$sFp$"[dI4mG/!BD1,?k@dc]4.H(r254=^.fn]4Ur'b!6cY#B['qI"$G6lDK?b-r*#Q?l\GrfG*RA(19P!3pgmRc:lRpZQ^::A!^V!1#)C3$@CV(Aeub;EZgT:>-Moms:mU6:f3mf(1M*fgK)LHZYRIooJ2X0&"9T3`*B_>SVpLrdH]BnQ%TK#)=mk3.rH)Ko"cORtWI>lUI@M5N6Ci%s@5r)W_B_4B0n(,prFRN)a]rT4A"95drqp5)3X;[fEb7=Mo%!&_gH2m?&pV5Ptb;mu9bu;orFH'%BYaD'X!E7QhQ4h;uM'WeYok1i,o/;UTN.UJ]a0`[!X!tj6AR!om*!\MdfQHhXNWT9qD$EAcH81LTdl2luI(dYuemB4T:u:tEc`(!lRRSJi^QJh"qH]aAoBqZ*3h!GbjX#=cU!WI&Tp*sXZN9NTd2"[.&b.qWT2PMq9q^:CLA8oV4i-NZ^03&pMD>hnd&6*:2LTU9;EGT[&<^=e7UhujH%,gh9`^oSlK0`\V_35kZKSnO;[b1'Y.?_M@B9D/JulK0~>endstream +endobj +33 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 4031 +>> +stream +Gb"/)968mu&\dj<+=G8M)^[h%&#YR?>OpK?acEj,Hq/!EeVZNi=YM#PlAg^_LMV+T?E_!phY8Fp(Q#![-r'U^ANUHfT-eeP@I-Lc\L.S98s_m60T$Mj'-;g((pVV[SZZ:*^:[q,;TA&t?efCNJ":I=p/ZZQ(Y)UCFLkoDB@"lLL/B&!Hd/94D"T;_rC"!$$fEoKuSM_n%79"a:1*i>-0+G,u#qNPa<2Eips56"b@OcXRZZ0c8@frM4)/Qno4WS>'6975;0c-G3q845FAf.RBY$%8se&<5u%&dA0q,?Cb%KJa.4PU?cNrj^PXidJpsOiE%K`KI#mCVngc$3I[4NMG*5t##;o1OS]="JhLmN@;`c#)$*o:1OMXOV-N[J2!n9>/nVa,b.K'SS5B/:YmE6L.XFM<2[#eKmm+@/Ba5Z.(NeW44$cC:oh"1iS.oa(%qE+1^`2N!#aM6'tr'@ZJh)9E'l0B^lbQ[4S7+6E`jSK*n&6uUH^rqPJaUm/@HcZ&D`1B,&^c.Ql9r#&OX=YCC_:k)hZQV"XMq_R`D=P"VYrd#5djrMrJrT`EOT\o38nbQn",)^X9iK/#?h'N_(]_i'[jAmYi-^CdTVJ/'^,Vut%p4o12j*Hp%!W=+ZpoNW,hif1+c[_U]c3!1Se(#K#cR"O(+,f=c4.7YXl1V%,%"@TT]MP=c+M`@\Y(/i;'r4:1k>?"1an3*VuT0mN`UA\e^a88]'B$2O\J9?QLgWoR71H"m]rSAcR=tg==fceIB<=#aEPO,c=\?_^IJUK,]CrdTj^\!P/nGpX1g&RnYpsPS0'eD,A*c`Z/c.SEaKd1c?[l6bS@uQt3QkLR))GLNnAs+%\+7lN.hL>6AnZNJl=2u2fE#P3XTlSN;'LaReH*q`S18sk^1ik2aplVPeCXPG6L)6SuA\71)?=fs+.;@\glF8l<&sm6@!b[_LXL^G'M<.h"DuD*-%3^cLe9ReM#QJfUO,]hP3h/b.hnV.l^]B#mZLrbI2APT4r9ufK0Gg6`Y=5]!/[3Mt.&K"'*\f9>?iXK4)H?4GcEo3L,ZLSt83])lbc!6JUTA"rX)>VkV^`(ksShl7Ck]a?U32Z`S,#%Kk./ZLlLP8-fB_H&!R$M(d!J/B.2+3XikI*P@ok;JQ.R8ggl1N0Dpt/S.t<>?^:EaXtb]@XU0cQ-Ybgb%Jn2s-O77*JVK%ANH:[2q;<9X2hmKcmr3q(aB4e.O`nR?@0OZkQ1DuXn2b30i@q/AsX/*UjP;&9L8S/(TI5-*MB:$N%M#NUdXb#8QfRV##HH2UH-mbU39u_lm'b7OdmW`ICY^,=RAje'#d./]j!IA4SC%[cNaQV,&J&=&[4hpXqmgPF@SutDZURrStu][jB_nrV@*TuS$\n(R))eG6iN7Sqq\!$#g^R_8C4qt&G+S+)cdnieuN:Ll(f?R9Zd@-E/YbsM.>+bV?_-<=m&XtNV\2GLq@`?H$@R#q8XmTIAf'MU=+6b"P3/R[t&B4l6%&B5a=fZ0";XG(1V2$gO983bRj7mXd6lL9[NP57/gr-0Q!7LB\nEJt1#;^t>.aTLG`342(CJbQ#JZ6$lEM<;15"RYDCC_Oo<"H6f%"kf*U:1l"8<_&]mK-muR5s&l*.75&Fmn^J_J4d^ETq->iY85X7GkMYk[9[3)L*pj@*M22>%_+Nl*M*[>`X[F*gOO4pgCGD!*7s-*>5Gu+=nac=/#_!]2g&HU,2^$t?^)&t$4"-Z)@M%u4lcI$OiJ8LmH?RTi@qlSDALIC"ZLNrhDq#<`,[WDJ[o$UrNdrXLKMal!)_e/[2>U1,;GCiV^S"_V,=WuaH.=&Ug?ehfn^Hd)0,>'fSYG"4[i@jMPCLRR`E^.8i5k50f+noD)$$gllgFHEu,ABL"#GKP&(J3^U'-/DGUk`T,;K;eXJ^+AfL]5N~>endstream +endobj +34 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 1377 +>> +stream +GasaobAu>s&A7Tbjq]8J&HKa*2m9nd[`XAMXj+s(((E?!;3\tRPM34t#&/ZgjOCc:&qg9>1YnF4;@pl=N5+J7k`7=/q]JF#g>7rg9[WQsrnM,CZ_nNW(L47%iuQH/0rm/*%\lme)f"j%!V,5V$Ght3Nhg0q1K:u)>m[gub?T>FD#X*G+j+'Q685J9%KG'u"2"52;5rC5O#1&l/N%m7-(/cUh3d9(F`rsCE2'1Cn>VI5"TdlEh-tI.Y'k2\-l_dR4jj]Zcie#\6Nj5\I&2n.9YeXAX7.e.A'i1.=&cn9jpr4AAPf:X(4kk-VqeXb3\O*W/@4H.c,S=*&/42cK%nIXf`;U,(t\pn;c5Fmqkc[,eUbmAn5,n]ZCHl6q$A'mN4m=X1f/]t6P:"CUr4*C3`:LJg(3*76eg"*d<#uD/i3[$IhF-YL3q/7*FXq$NUA\0E0i6tH9YRW"6_&-ST2%86(?=J%i=ELB;m!:EF4\sFObejb1&.\aF4PeBDRVkJO?On6bl9j%Z$9P0jm>&28KcPV?=gW&0=@0p4n_X3Sbh7&Fm]*j:_-TFRUj`r]2IV47I>B.moN8J#&W<[d+!fdBXWBaO+eG1J^:>9Ld08s@X)<\hf-#feN.rYdk(jk)fr@rRT!'p:`r]c-)\+`;ri(W7f?VK0TJSIRAe&BMehAP``h^TWqPR>`UsbP;HB<3[=OR"#9/\'2&^WupaekJ&_APs`NFg+5!FKotA1JCdhO[2.d\nheaiR++q55LHi3l3r^b/sVG\PJE!Q)9OOcFJ@!Bc/_Pi/`C.nBkAq(Q'0UMUtNYCUgmW"c(PY.R_82*1K'H47uHG=o=.t!">suLEGVuh2D&KrB9F3d=iR!ei]49e8$R[sATJMh@+IL:!o<`Y"hYtBFjY>3m(i?c4a^N]72hVj85U8OZ5*3kFu4N/J"_Jd(YTUF1V_XfAQ@?/.dl`)nnX&UNX`rn^S4&jSFYOLNU%rk^5?hcd00S=&OM\Q/2%U+@\C:>;9<.;[u;r'bf6SmBVJfJ6Q`-/0)c=IT&DQ,K+*Ir:hlYjUEY8ZG1*P%W%cGYqQ%86AX*,uijis2~>endstream +endobj +35 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 2579 +>> +stream +Gb"/(968iY%_h71i$N$Tm]`0s5,N')NpL;iQ%p#gI+!_7g,;kB.?gJR1V\B'1`moQa\m;G_cBLNA]`1$)Yb6G!&0QUr0-jKCe=826Ef9=P):T1,X(,6j?6dB#*4E58\bkRG$Xl?kdV4]^sc$mim[W'a/Aj,"_=`@8LZbd#YB`eomG)`ac],WZhJ+a1fZ#uG@`NgKV,Y$f(:WeN@r[-PHR\UkMt%_EOG*^^,Hb?U<-K*r5,@UNmJ-Q3g&#Yi^jKTZX6*mHS@AKU^VYMZpoOj2\;GW*2KBY32@b.)+DCO*(`fODCBU_j4gsF>n9+$P3-Rf2,[Tc)>Ol;`+'sCl8[n9dLAb:Dl'qIEQFUFqQ1qZ1:YJ947WMK(^sRCIUhs0/t']E,YRAN.8$pK(c#lqAa)6Ib@GHNNdfhpTB?K^>ed_.I?sNo(LTh:L*_+o,f1+.:@7ssoo9ZFN.TW/`.E[>#S+-aHA/Ht_V+E[(!5L/-BCPkQ(_mF@TuRdcPa-#nphgb/;N[5c$eAfJ9GWj&s.Yl]EPW5GbK>3\>3flFFR69p#uR+n"c^cQc1:DIcmh!=S2;eu3hhnIXpbeE&$_\-K$O6U_T\Tk['`g^R@]9&prd;BlEcLWi>q91U_mZ.6V6`#\e/d#pH:IJrhmg\`I9ka+ED,QTr_p8Zac>0IGi\0d.(Y>GB(I_Mn+micII];PIpOFi[6NLNg\$Ab0&G[Eg[b,c=>-]KCjRGq?\RKI[^j68P'6oLJ2guY+TuYBtpbcARW+Y&8\W*k4qq295rMqe>1nkkeN#biUT-.>W8@%QY.Gp@L!UP%:r__@/,)Y;D)AFM5BWEk#gbGH672?9[,NY3!Nh0QVVU!QkN[I)?OfH**Kj*bjq&KH5Ud;jKpD#!l;e3O+@BAil^`o3:q][`\L:29+K`_JDf]onXSMJX_G[9%?/_`t5A1AP00lrU&BKSF>7L"CL$OIS"=I$T,2)?%&%1SD[X1;Y]85bDUA@2n"0Yl3Nc3rc^Oka2Sq]@@0@hTl/8:o&bD)C;L5oYmoAK$9!M/DI=S[lf^0kRqE5rc=JR9g>(j"dgdfm-eKi8NikTPN_a'ue=9lPiS-O@2R%:^\Dm,DG64ML0a&TD%S:k>BB]EE2qJlb8+/X5+$Noorn/?NT:\JUhs?PEOTu#Y6#o=[IiJ[,0,`rGEt#413!en09@j'7fVKd63[u!@$.@g4+*>&;FG'>4ji7I4^#N3g5n";H&G*dk1!QVEqI=OG>#,OH$,X7qrocp,"L@4]oK55ADGTt#I#i_1bn;;fmtBs#+e+r'$=('8?oj`f)!u5$SC>0IiihH\[P.r+mTD9dlm+RRU5U&"F)$9KE'Qq>&9NRU0GOg"Cl4-R4Psqn-:EPp'fSd-.'lj:VP&<0Aq@B>cONH[=2C@cSb)*D.)*n=0b:sU/7jX8UL+PP?<>hLf-+:1DoQ8k[SEKUMF[R36.4AOV@^5.6J=3)g_>WhNG"@89h"s/kq,!O]0#mr;VBXMm\XTuh:0rum\XTug!j'FcDGceg!l>%cDGceg(Yb%m&\6^[sr33XrKMo=5L?7oJV-Sf-i(A^(ROC6i&(;lBCS(XR2?+*#c"H1'k%P1$G_U@!dirN!`tgkJbC>hi!=%ArXCJ$u)maD#c.D)\bBj@/e)''*,J#TuVU!pSKiobg^6metBBkH*8TeAnDs0H<>%q5pt3Y)6`O[2`J4OZ),g"2h?92sZu*]6,Q(BGA)o_qFp+.d`B-RTtA0BQm$G2%>%dCS5jrQK(VZ43?(2;>:>_UoZRG)!!EVg]kr*WL*M=n)#%"lp5in:G2'9NMi99O5%!Vb0&.LM2?#LlRqmJ&_E@CW*rSU0JhgpN2"<#U6CZ3l1.C5&L>/Bi!@$0*M(s7SiMi[O(HL:#6K<:XdR*/ar,iG03!a&0j[J%%Mb"rimcM>U;MYM5l<1q4kEuC8bh8+(K'+Ac~>endstream +endobj +36 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 926 +>> +stream +GasIfgJZc[&:Ml+CnJ3GW0/]7;Pu/Z>'aVe'Mk@l@Z2FA@QVXhmH8]T(tE424AMW5[!U*dg%C(#`J8TN=TNK1^rNVe(l./QQllHn$i#n/SnJ"]neX?WPLsOe)'DOBC,E)u:c&CNkT*cdc5@iN+=tg2C4@+#Of`r4SA$FI=0uXMFFC7lQQNDdsJh\#;[0ui_q2@l>1Fkc2Qk23DVD0>oPX,=*dR7iG%qdE&S_]qaYM>(+Un`lY7[RcrVEW"Hh$07`NR@m(@s1`TRMMX4"!CTY2qi-hR0@Ojc&jsi'+YlXT.?`1:biEa/]!h6a-KY=FE^$Xng#_il4[FifGQaM)@?]p1g_>1Xbg5\'q(6pKT#h,dX[8688cKFcg'G[uWkfLKkTW%Fh4VNpI*In@gq6A3u&8sNEt^hLO&*6KT]gBfg<#&]?IBC!3JdPA/u)'jp:AMGXlLj;0`DHGE*Fi=9+4pTiXq;iLD(d#1Y._#'\on.3np8)obdR%0Tg-]6sl`.X:SXi"`"]D`L+KLBBgF@oV[iI0Mlk>2Q38F/i:.,g`'&$TsCqOP)Xtll$F!oc:R5/R@5fZ;)@n\uCG@!3qNZN5BY*"#a\u9H?l(Q`b>VqNRl,(ko>B1Tl0J_7FRR$1C_.45L*)+b/GEBgsrYIJAXhR>Lmb,+OAC>`QD+m*UaM'_N]\r'/s6D:lKUU>oGrNe?/7^1$@endstream +endobj +37 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 2885 +>> +stream +Gb"/(968iW'#*s=oU\H`bmA!4_8D&1U8cf2/N\E$H-ukJ+9s>,V!q3dQi-RUH2n?ROtu,K3@C.mU=bjtf5uMkh2p^U8".37QK[G!IXWS7.U(_moRoa#\+IjiFuS`Y"T0CLFQ#``j$k9q:HMF0:YuO"T?8h"6$D%K'+(dO81G=VkBfCp[kqGFh_%.BPu7XrDR,arn6;ej:&dugUc68@>1RCZQ`J*eWa59@rfWFdT$dCY>5uP#7l%H'[SGmXA_]p5?8!M!4_Pd[;?f=7)Qc6;SdA,@bR2c^/5d)HN$@3bNhe7@2\\<+HqVZIoB[]Ld`_>a^Ir>c,Oq\_KHY#(BCBR.NY7A2!c'O9?c$7TKi7\Vm`-(nV_o?Sk*S]gCpLu;l"c[d#L2/'oPWd%JM2knckKHV?^a*[e#$q+V5W;Z6#UetQYCG,H/'(tjoV\8e!.#tdD?8M=3oN1=HMlC>\,dh"nN]rkSU:!*FItYm<9*S[iS$JK!J^.3qQam'(e3Ems7@?"Y7$B.klEIAX9XW\:Im7;S([!$(k4[QE`E!9YTu3H%Gh#aRO*-GfG_O(HJcoQnmL<,o^e8O2C&lg8I9Haq%VoLIA(GXWma4RS25+QmjVoPTaOj5hKSqG!q6"'EA=W[.%>fC':q0El'*DG.Pg:.*4"OOd+9k"&4WV:#^_fV=a>ARAK_rMqfG2aE!H\CW0D$Q@aOuT\"&KG94kXt_,^E^SqD$q1lcd6l4@rW5#M_:OaFl:NI8N%1*jsr*e!^O%KAd@*q=I5/ZAh8jo6e.Ork])B1s@Rn&DY#F-n.,o7KsY+G;_eMFi=(fXKB[StE)/tZ'XhHb2bjn(cn"uPbk*P;^8#"mTg@U=B])?JuD>PK:hi0+^^QZ(;-]?R3J^J>MDA_Z9'NfG9'\QSpCDX@Ts-4I5#di3HOTho;+%me)VL:^,oT.`"X#so/p+k"JJECpVRh#V06YX9i#BYMsb"kUSe5FGXmZu@-:?m_0DeFdA9P@a%b_@H\S?G0<28HuRR/Y?2)QKATlSO$ul9Xah>I'FXX5GJB1lt4!eFP5a'`_V,+*JUS8P:)SQQ&BY2n0O^#,'&pGRA\"Aaf+0P"2XCrAsVSk_GaWh`B_iq#l(>Le%nU=LQRd\C&+hH4nV[qeZgm_7t&C]l=*%C(_i.5\mCiInou]b>AJ)Rs!23'!rX;q^fqV]LD;b8be)+OBIQP@R4WB[afP(p$bD#'#B'r:?XO`--Qf`9g0jc"][+2T&3OK]S+"XEjd1V4aO?R_XPp>TG6q'QK;3H\c)9m[2!g`'EY-h'hb9/@1'Q=YX7_WJobcOBRjQE^kX5fBb58ii@FpuQ1OWJNr%%$cKa`)`citO4N@ZNh5RPH"HhGEpto!3N0F%@39ZQP>11B[dRR]lk4K=A50o;@=!h_H_s4)&2`Kp]%=eZe%6$%FAaj5sa!HmcR\K>c.4q2qhJC[3&Y4sJqZa3QADP^ISbntaDV:U:#MJOV8k\g)Io"M'>2#Wpr0TdBRPJtS*+Y8kdQB.EAJsdtRk3uFPu7KrMf"Y5(\-m0QMf<.,J*I@`?W6,KgM3ujo@WIa!VnUA#b3ji'5BN(KBbDD4EgL7Wd72SWuROn-Em%BJeRk&oIYk]!$[r[c@,f8fI=>e"[ci2u,BG\G%HXa6a-"Qo)7GJmh4H(+#t]1.(C7Bk.BMS0HNI`W6nK_<_AC2i_QmL$OISm.tjX.>J-=KfD3]RuWL0!jD"Z6XZ8&L1:GD\0U@V/95uQdPLBEDY:f\P$/'Fa_tMVa:jt[k6Rb;HA0ljp?@oMOV1Q+=>SW]=M;h>qXbO@[cod-o!-kZgnddL3G(pf\9rth3p9%4#.!0d%4t*Yl"nZ/5M>g?qtU-#D<%^lDS1NG5@`tH@#m]+>U!6jft7AGn5qU3\"bNu"!c*1S1*tPD0R,?n#]:"86'7klt:Q2rIg;YfJd^7s)oI%hufq>l-32$47`YSddLPT;V^\4Yo17rEno+<6L!B/3eq7Xgc;uj['V2b?l2&7[!n.^o[+jUCDU,U?odr(JJL#f+tus;Xo3aTU`Emkm/PP]C@_~>endstream +endobj +38 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 1416 +>> +stream +GasaogN)%.%"6`/i%7^%Ak5P,W&(!81u;arC"(WO5NP=rR8b20G'-C*Qi6U],`@u:FM6_QP!B!P!m#F6JE'.Ahq84l>lnZ*!ec6f*^mpj8?UqG,kr/A4H+iZ8Fb?l+1F7_YBiu;;840\6=`St>^4]]>%:$=:g&_11Y&7VDtZ8>\dkYa;lDi`HP!&4Rk:KKVBiVPGo+=N3n9MI?l["*91l6`Vb;%dm[EM3#m;q%3!hI6?u@lUO7IZe\I>IWV@A)9/f0,(_dbS/Z7ThXT.>SW5!0;IS<,hU`7?(H5/7o!Zc2Hs;p)8A#\4pg%(Ic5ucQ0ZL[)b2/Cf5if]W%ERS%mpk,M=F%+7g+_5+LG6?38[Y9hn8X\GEEhRRbDn4NhTRDC\f+\qTkp@;*%C5IDmqD<0tk/jmFL0[C,S-.m&(BWU\Or$mmP?l1Xn)n=)`(6;Bs;d7g#I:J:*9/2=[%dkm&KGYH<3)['h:#RC;<;OgU:kZ=^GZVhEYBk!L8ZcgR!bse_u.RG@[a$jFW70Kq7'*ZcY$)*3DNR3kirPLE=5$d:,m/?o6f(6u(akM+h:HF0h+.d$V7\MNgc=aYZ\:!R*#9q]=:VU('N"bq/OhU%P@SUbNaT5U9Z@a_S/Wu^VM'rH`9F$I],,:Qj]P@d:+Pj&R*[5+sCM?^&'rm@bK>klDJ[]&&rHTta2T8'0X9P:t)gYA4\HZ#OaUVm->7l+!DrZV[r.(4ZZhsM!++0`r)*+@o#@@Oq';7reJ8$O]$W,$NCSG`G`$>\VNr(^T*f9s<`FYhn-gKW=cEqA,R,6aGZG>4:aDg1tTLU?a"%JuR:O6^&OC?Y7T5@"N5YlaVBB:1u>3)HX775^H*A.-mQ"/RpfY+5D<51X8o"^lglAm?F6`>eUR*lT\,i:m9;W"fRM7,^?0GLE/EVi?GC:`fF$ooo+B./PEV[S_(f%V0EZJ)aJ*RWEA6'N;e;(DjoS>`WXYk7oY7lX>GY(37uL/!QQ]JE9$B=L,>ru/0V,4fa?$#8B/']TsY=s-&ukg`N?GBr#S?LPK5eujE>'5^Ms&Guoe;0j/~>endstream +endobj +39 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 2392 +>> +stream +Gb"/(8U&oK'#*[5e1F;-1]i11QbIag1=,2[gNoHL0/O-]m%Ht(MgIJ.Dk@O_#u[(P-lKuO5PpjHOf497^8cbgEVp+>2dI"90Bi'J5sj#ZNeG`+>+F'p@eONeh[.PeaN7Qr8)0#ZKtcPdKPTM$4J6G'(5Q;/j=sS26mO#>q10X7@R]n-dJ;09>tZ'`gGZ[oK\o8N%DC5?dJMoh=,jBHo]52aPO>E2a\p$aQaHO?(-`].',sQ\>9<[22BE"]PNQ("Pn.eC?\gBi=6oOugDNr^kH#d@+S3PJMDbLK-r$&I1%2M;(^WSN5q]_@)3g^J[3e%O^T-lSjug+_4[.jN[is$^2%'$iVnc(.h84SS!/=1qKgQH>_2sk5+r9,fnk-j."Bb'"jn3c,;-r?XH>q@5Y.-%q6;CORYO(Sa$:lYor\7;:"6($AF"Ma2_NOD'87UVHD1sJEiOE##%XlN,!`+HBiE_plXc68u=`4nSj`&p$']Bhur4O'H/8mL,\(L-m5EG#iT/>TPLds,jFNYPN=T5gr]>iQB,(q)'@\Wn\m)%+!qKuBX@Thh+u*)=&FY;a!BK2fmJ_jj'_pO]u[#1b9TKPM7]U`Dj9_]@)@f`iUYn9s([^nL+ZrhsL%FW-QNnN@BQTj5ZaWPQ@6W+#i*[B#.jV0*<)Tk2dF^(sLG+jFr0>q,ta9\YaN+es*;fA^r%p_^l!DI9KWl@$^@";oBGR;jFh/f$HIW%H5hXXOEuFoIH\Xe`KT7cEjl^EN9=TF5nmY'o-`9*s)A8cH=!ReSV5SXt8!*_?.r\iF>23SBEa;r9YI1X21_@-,cu(Fj]-(1hg_u^?YpfW";qGE4Tb.hYb'q&#EEo_LM98E-?;Sj=E(@s-r6!GBE''.MVPt-orP7.>tfSfiEn?krO7e>9s-MZ_*+;Amf4UiPZpu2024F&fp&/@S2Ht<'LR2a.h*P(,ISeHA(>]dg@qV:i6gTb+o%-H(uXUKe+!+E&l&d11AASW6%U8Hg/br!p0TX@8'F[@")b.flIe-)n^2HkIK'K*FEPX-4G"mQXI-PCt:`rq\h\E3C5DC:dddI0h#,:/*n'ZZISub\!ZCRO=_.V[Aj298rE8t]Pk-I$\K@6d$&YmFsHl.%@b:e\TVT*b0K6aQe^+n:.F2TMn2gHep0Y2P$9sR3GP@[dYZV3:(0hF7ZUsus*A-Ab?sJ-WO/Oo;$M'0%l$jOk-jYC_!"Blfc@m-WJ/b:=TPm2mCMJCd>Yp?9r8;.CBNW297I9If[=9Nmn/iNR?2FdN3^?r9`AFaD=VG1TI`5<^:89Sjq5=D[Jgq8*Ndq1f'rio\1-/:"`b\!od`'KTsH@UC<@:$:1ZCNfRLVTj0Eds#W=H#BgBbNGRg\=VCCY\`P%?oG[Eb?T7!^XkJ"DN5sgPiqmW8.jOE9^=d/%O<&>_W+it.U2gP4b>GQ=Lj%6rP*:.\NjDmP5$h>hEgC1Yrh'?rmR'_3d<:fjhKbGe1aG)c<-F0WD7m`R*WV_":TPa05b%qi(Ahd9[(r!N(8C$T'_K+`Q8ASG/q3].pDNS7Dn313h/M#Q_@:#u99h*8*A[AO70YP\:R6l&TA?A2P*5l[a#e#5d_8";)#]ohDsYjMIkO$ZeC*]5T6rm]~>endstream +endobj +40 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 2837 +>> +stream +Gatm<968iI'#*[5oOZ1fXGm3&^dkE5[N%;&AiDM;ClM6$ckM]uTh'kJ:GR_'p?`&UOL-:VR7]K%7'N:*)VpAg_!t4QcX[.IHjNS%"UGFX2$h/8/76;Qjm:0lHP=bad&f)g$FprR$^BdNLu5oR\.@[+@M#)PaWm[Z#XO3h;nhg2\UjSIr:TkC]U(C(QVG%HJH'@_eaU_/L#;G_;q@h!MoFAgU88;ELE/W\C\a.6Uc7*d'V'j;P*+Te:MXjpK+B2$3MZQ-?5*m"]dN$@Bf>egQN(G[#*I^bWZp$<].dd-UFNL3M"^c\AhbD>kl2N5>R?+2p_V0#PGBamO2rDqV0[G:46,JX1f)I(Hs`u'b\kcSXt%oJohN`Y(jrqQ2-ROc1PkKn6Ln=Z022dR;:`[GMcGnCcm5QY&t0fK7@MgiRU?&6Z(kj[oK10sj_ks]Vg^@oI#iXJjg&R@WSWdYcUb)S>I:0N^*r:]WD:gcPQJ-GB_8Nl&C1&aT[CHo+8G#8Tp-bD&"E,dW"i63o3!29E`/p^WJB9!9n9\M^"Ya:!S*S0YpMX2aCF/'-=Hjjos`:=?:pa_^o+6:HB@@^F\pRj1'C]3IuOY.$C5Wm"L>pecj&T_gM@p===#iP:6?c05.BhGTfBb";4#kR-0/a">k6@/!aH#9Z(_;%%-kO,5\FeLTr"aL!6fi-6.1bo!CPh_0_K6H(P^VT'2Yj@5^abFIq"gSr7BrP\$!E/JgW2'fn`igse49qU,'om"@smhkk(bk5kEcA'i+)26kSFr@R&T-D6Y7fMQ!!"G/n7-(eO[PO=u@YMN:lNT-@b@c8s>aSq$OU1aWWTcFa?`S%%P*bFqZ-t9(So0;Yl5>@MMO1Fhfeg"BTFE+?AVSD3ibtl6mW^-@Q&1nnhX&_KTjHIuKlnLkJ.s\%Io?HV9p;pY$pTf*3S+5B_77:dh:)U[M2A-%gJI_E`VK2!="fTTRTP0SLn`!b;PusT)`YC]DGSms&Kr6Q\=eR0?E[:D@S0%AnXCb-T^`g/_R:(^QKChMYk^<]i.T4i$338Fc`d=3_PZs]%3*]5gD&0]DVp^+p7ou1oM2*Pi'r0c*0E*5Ar<(u5?jI<_a0W8pnV<3c06M8$MU/2f&U%uO_72BR.,RVr0Lo%gQII)5,HT4rWV:,1#"b'c-0&[-41iFn"QerrTb;L'5R$Vh8C,0S,^J-T,q_o]WRZA7<12K&[t636uEGO^#bGhI\1pSpQ.pID9#'CRNq)JlBnMWl\Sje*>,iiT#_Yd&Wp:5M3+Wp0f%NIgbW3n$QI&Qj;oX9mgf$W$Eq+V6HcWZfh:6PhR5F8J6--PIB*60W_c[lZ+3_KCTmV;5V$FRPtT4VD%&Tr"F:/#Ckg]`-#Ef->'!!M7"rO1j%*d"/I7c->+u;3K\ch4D3YbqJCI4/J[E%Tc(+&*7]fYXF:q!%Riq"LqX;gI#>dTjgXY-RM5*g-@\Hfa1@CaW![$;8j5pbPG3ncl+XU:DdoiHg`lZ_>^Nir\jT.,BntHDd^eed^CPm.+DQIKnG4S,u^6;kTr4i'g+3F;LmU,*:OXb0E,\M\3,AB!\UY[nOdg]'"tb)HPK[d`s^`SZfjZ]mCCjZ)rCke*"D/;`QbDs,S\ie*CF$>HnE"3@%SJ(@=:Om"@@TIu[/78qpUZ/O<*Vq2`'i'39A$@A;VP>p_0r8DJ>H^47[4.9g9F1'%+;k7>jg%]J5Q"Cj<%^Wroe@(A,@Yn<(C7n4!:N'oj?1U%*K\'><=?@Dtq-IFe@@7N&^Xg\!6r3X?Sf-QE8B=joe#_n-0/,*G$Eb.fQFfo,g<9+[;'fq2!KPikJIVQ)VsS[LDrU[fK<-u^is^Y$XmjhL[$kqu!Z=494/&8gj>Rkk:N*D>a)g'"R'_ER"5Fr$4/,_ubOJ['(`*n;>K))h$]C'crkTrB`rpK!VoAofendstream +endobj +41 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 3657 +>> +stream +Gb"/)96].#(#J7X@+/W31e-sW#dU@6UeW;d*bWKVW9tuOL4X9>'P3Jm1Yq-$pB*s<+=106lZP-5%nTh=(Dlh`I8ZRhr8I)DHqh\SQfRfMS8^c[f7ZXN,0LAbQf[4Ud=7qY(Q#'=3),c6$.Y/IBnFqrdOZaHl%5a2$(_]j:`75L9U9I7\pSShjs0[IKI6/r`QAbiD,&KB+3h"MYLS9)>>p`pk@\_Z40Hcn`^$NlaRT^AIW)\+p.thEZ8A$DEAG%/iB?rJ"^Jo@Do/Aq?K;o+]qf*j.:!XQIZsOGPJ#6RUT2u,;kt%/I]2fq'%fP0*a=k(ecUC?6aeh:B'sC+Y"jJ9qjVD8HKgrO1Sa]'9r#dqZ?qLNW\<:#_?&-IJ:O/FXP0tA+$'?HXb-,VBXg.YN5="$Vj9p)9NAS_jfS%;eC1"A?GfX^F_udlAV+q@Il-^87oF(m&o$-\5cb=0(O=0GIsg_-0HXNRN])Tf59(K2Ip^cl_;No]-]2rHs!3^is.7*[cK]+,qS>I2W1BdO`=f)dk,,12P'Ji\)Z12-e9,5[f7l#`j>\E+SbIr8sTj7^6db2.*RbXV)`R6N8B?5R^oQ0!;rr:mao7*iHO&Z$l#$noi84g4J[ZY?$.6g&Q],P?,SqQRQQ4hST"(K_J?@0Z[ZLs$SVO%)ACRD"Z2jcRtUE/1_lIY";saR1!!gHi%&KW]4d8lJCl7U9W8oY.H2E(#*aX;N_(BkZo8M8f-HI9^D\C$g`I=r,cW\5)S,p)"Haa?nile9$0;Y=0,1]s5"X6pZbce#85Z?1.77E;Zb1_CC@V!&)8q[q.s?p&.Q0I.!-?)0,1AQ!n*Hfr@t\&[Of8B\kCm$#/970_"YJp#el92M<8g_I_6bMcTMFrIMV_X(a8ZGMK4Ec,ku@d.u)tt"ne#bp6njoV>"C_8-lKh,s3.C)"6h.&:30aS9*m!h@TO7pEcMoA#`uP@oMUA!U'dV.J2nNctd!#Hg!m$`An(9)"[kGN&*2>?:Y)IYVa:)LmVr%pL3MZ"PA&5cNPCr&J_S%+o$QmqQ"iN^?5s@pUi-b^(?+/9$b=J'QYHGNi+kaI<65IALb;4O;t(Gl?"(#Dr'<^VrZL4Ri9Q3YbBO);b3?X!ms.:i#MtdM+4a1%RqI+o!;qCp$GLm/pqngQn7204\4_ZlNPgO]9@td-nKd$c1s9-<[0Ln/,/E#mGV8Eg.ZK]m+mosh?&VlEa5-=k\9m'K`*EG\31B#VYoi[jH&DHWg%GU@E=l7r7=@^:X-!gQg=I,H['2.g>Oh!9]K&IuY\E[&/7%`AUdea8bd_FsVR!rCFXE8%@OFmJQTnhN"Rg9/-1ak(r=_naQE"`f@:e'D$YpN\.9\`GgTopuS6hS;%#p:<2QVe\$L^Y]nkHMIB3b=h)Og57](Oo:gY.a*9-E/j9pt%`KBd_R\35r8Ol@D1@1>\4>!EB!X,6VQc*UfD<(B^'W`7\nhdP\QaD+Rgr:g]$aSXgcJ[Iq*(d_c_Q[uH,m0Ku@pa/fJVRS).)&IUHr_55)m%Qne56/?VReBtJ9PknE-&gUc!DOfbaW`DZjn82#,uRoqh25SZme(')YqYP?ekCps4I(X5[R;As8R>YN5fWhoD\0/"AQDk+$_s/q(KoBGF/(7DU\#7DnXi@-Z'P_I(7@#rkoI_DBG!;D2PognF!3`o;.\aBp$qINK"o(r\\YD="?8QY3/OF#TG10Zhh\m&M=2ON<_i]Ct>ZBq)`'.)DqVi];mkL[:pPD(cJ,`&-,9rRscp3U+u[L3H"6/OY"r;'gRN])p.fhO5;:Jh![4@+l_LeWUJdI6?Lq5BUWPmb@;Vm0)M)gA^-G/)lDg\jJ=-=@[_9;FrRgg*.e\m!^R.7,!A*^2V@N??:HMKL7^S.>i!gq$T%4GiPXK#\-8V7TQ;77InbUX?$<`![TF1e7n2ZqDncId;iM3iU?lBhdYi>8%IhL=b@!DkJSUmHtE:!n2B1&\f!gRC3W-Ce(lP)jH6iS8'Y[T2Z$S$,OIRVL(q'TboH6G@m+?#T&!CM#c!pSk-eZN>=DI^rc&e#=8?r',C^r^U[W/4-EY4iFW+'Zoc)AMm:KM+TS'kZ4e2OUbtt`FTPiaA&d6AeekIDJ:s9&>>oR&W$C0RE5pRXEkSGXLd3]!.NT-;-;RHb,C$=ib&@ZW<^B4XI7cmNVhqN-9_D63T^Q!8r=29=[NW+.H-D:GCadN>lDiYQ`2G<$SX:BS'.'!L[/&7Rmn32/1^2mq1h_'pkfYP7O&rO+Y)\=.p3-pG4PDOX*H*%K-=l`.r"8q'="$X*:'V@#.2il)]=IuDRMh,P>o-V'\sKohR%KiN6cj_#Q04)LqCL>@fd,FA1N0X0"V>iUm_Z&Q@Ynk@Ta/qM>Ho%,QG[SOm\XXoq'[8T9hmdfPs^Q'^tn2T=b;L$Mi0P5FD`ZCK!/#'ZkIaEp)R#CLd'25Ycrg*<:4;\PrHg)PcTVRVsn(,Ng(i%i>2X,'RWl5,/4##O)%>>66\\']t4]IAkk.E@C`]<@j=)+j]B[#\l/:gTWV\+Xr9/YbIsendstream +endobj +42 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 1355 +>> +stream +Gb"/%95iiK&AJ$CbUq*a@JCB[C4R/QF`t(pZ;%b^Eq2Xr(l*fO&LD@EIV1'5G$_9]BhsG"aV[W+h[I8<3!)'g7(DA*^um_JHkdbLbjReb/;![XI$mbO-L6qM(n-GKEd\V(a#$;c+OR0J?iqs)e8)$5QMdE7VX*$i'+jn)0[`K\repD*-Lhl0S1e2EZ,M/M.6V#kL8hrdhrT`6].EnhbY2@jMuLH(Lj17u0'_KLfR`#Ln6n9pg[-P6uDj)9ETa9N.f$/t`?L%+>F@O1#+m-9n^]S(P"$]G1f$dQ#3Li\D1h&5G\eW!!rCV1)Gb%M:uiq'rZ-U$RMk4&)(^df+-4hca]NhF#cGgj'8F'F2%l>uBOfDX:,Y5Mgo;LOUO*gaIa#E;-0H3u-g&1s#u=8-p?ABu7l3,"/M?rY)/qFl,Mm=X[X.\X4-;Y&*HAhms9..eIe%6o2&u%Ek]j,kHiIa(&@65fm%24/V(@\GHS0.6hpH&'oIu_-Go_t$?9HC.ZNQ,4*"P%AZCU:9FG9"+=tnY?Rg89.H:K[J43t1dRjU>&fHN75UD7T8[YtePD#c!#VNSEaiqQUXf'RPM3h"->Kig@,tSH=-c)N#bSY9*i-QDBUMWC_H?tud5.UQ@V4u;ONPJI)\=eqW6Q=\:N'IOPNS[Mha=X2Nktpc)n8DkMr',*a48osq9B\c.ofoLX41@WW[=Fbb=LK0sKKWip7s37.Lq(tuLZ>YB,t(3VA$@\(NGhEQ:ADo!LKB%A69#5u,Su.+[K'`^7FDJ*\&+WO`up\e[(\!E1@&\1@WT(AU4g3anZ51gH[.\eUO>TjG1EaoXe.r#2f55n(9c4E_OU=&i*4gr/ZL_ro7IcUR8;YM^4e6g<2O'\GX2@%.G1aS\5;QfPtM:<]`B=k^UG.iiK2CD\;rmtpMj';L&f-XPSQgTKlQ#QC3QM"M`JoC-jl:kAP'99(as1uHA>lm(W;\dHd]"$H!EA9g0)O,25Lbr\R$%Pn9fp@@2_Ce(qRdHH_%F^BigZenPU+$E@0D,q@!BqKZ]0Rl-'0I&tRe]6VNX4_)nmc[J:1i]Vi\C'iRX=K`CS$lY3epFm3jS=LEo=Dl]1cF%-VQOUr$%6PCD6nt/iN,PchXoVBlg9#&ZIRE<-l>PI39)\P?T/:;I'*7Jma_UFg2O2En:uFBZ?;EA:R3t/iij2EK?(Nendstream +endobj +43 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 2861 +>> +stream +Gb"/(968iI'#*[5i+?QC5ld#)@qoe[*%.?%QEud1egFg<)KLq98=9u_Fq=E9q_^o2PV$*3t?:W>:c0NH,pbfm-S8*59&ItoHNgE*i4]!;T@`nM_r7+$=a[QqMkjB^g2e]CF'Xk&fu^'(pV&;bnk#ZB:mkb;DJ'NZaY\J[l$n'hO/DTc7g-L@#M4)nI$@%3C>;f/(/D2N/cn-K$RAl6V*]$;T9;3S^a9\RrQ^PSa-?":GAq&4D.YUo\,,GfCf$j03!$Pk$(#9FP+nAKN3Q(G^u`hM;4>]b)/TiCVfHlQ,1qEQ">cnYSlt#n%(\+p.dTo1QtrH7_pcDcPY;7Fp1m]RI]<2MGRTe(U,=Q>Hm68qc\+R0k6VqB\)"nC.Er&?EI8Rk;RNr>CP5P;4,5uZ21^2%"/85c4S/0J[1?MpBHq9nm9!SjH,6(.S<5A!E6!`X-B2('U$`pB1d4sAO=q%,B5uUR_Vf('M8aJ#7gor:dKOT]qGkWP)KJXCa&U*k,FSCW%C]ZIBEup3I/\j?9[tbLkf[Ua!pVM,S0c^r-9=b\kspfo9+GqO7g\/b?nX,qWU0$9J2mX"0RBI3q8.s1.^IX.]u5n_1P_:jKtXElX@j6@4e,@%q$ugA%g(c]IK9ADY3^nGCLkD$WF?2KnqrTT:VW6GOcHi+47DZHs9AMHg+7`@ZngHQu%=LQ;X9n5(JYH.=3QPC=o_F'1'Y>U0\:Tm'FBh\X1hAb=V]?_JK2hFg+ZXXep15/,L[4.Hsa!]JY,Fqs_WPPZlfsLR*(J)]5MmI01pdb'N^`dX76dueFb)Hb8,<6CEg[Gh2FY3K_[d3_E*V59F+&2R:L#E#8,JaFRhe1n\XIZ*RXmrZ,X55P\+ph=5T6)"Cn;C=oQ@"$r/s3@?).!t]t1V@LLd=0YK9LagOMm&>dZ[I.UCOG7:'E%atd-FX.*!X"\A$jl/[e1lsodtfAJlf[NGW9rE3WV:(Rf!UkYcJQ`Bk^\!=M@)]FPa-E%0EZ\==%>e$KfC^5s6lsP^T4BL\>rrig?bB'rk]uhQhbm:hpX$pfTo%Gp0$5r;CMqLdY`%PX]B+ge/'2Ro[S9$09pC7\qRoN0/u%;A\646:CEN(UM6gQ)7_>U@jHA9MN-NEO6i!G$8EN(dr]>J#YDtfGd$mHj_@u'.#2:+6K?;8LoUDXf/a!dZ.NtRcio=n.(?!SJ6Hp[As>>D<7C_)@dTm9AU*%&k@_VU^IL3?"#ElH/G#5FFmr<5^;$.?OUJfQ*-PjBsIc+9a8%nSp\qV3ZhQ6ta#gob2R\n\;>5O4l1h9-$ZL?J/ZrFTc-\sCI=Vp#d/Pmf&A\<41H=N&)+_([\BFSXHo.MHRkBTgJ.")$abFBbDasJ>^J$*Yp+c`$>U(*X$?>=9Hf(h&:"g0JV!c=>BD;n(=T%.f>]F,#:o[)Tg"^jL$pC3JBU[]:["gj)3!QGF1%lHcC:rjTkZV+@D4r.I'b$/5?kdIE.G^rQ5K0aiVr,UZOL\D@GF`Aj&H2:5Ell*"l8_[(O(#amR>^b5Sid+&6`iV\lTtS%^r#`%lQ9`;1I1__iXhuE^EZ&ErU.FK6T#gQf[65Q)GGdDr?\Kf*\C.sYZ!j/Vc[%A($D)fUsG@7hendstream +endobj +44 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 3029 +>> +stream +Gat=->?BT>&q9:V;/^R=J<8jhSt/#WVAV/B+[D^0T6N).!R>]>NA!urn$botjU9mAG#&1!A_!^,"LT*ejCR])hZ"HmSmATh?F]:Po]oa;ifUI9>rG\c2!][sN@]14YE[\lF:\CK8pSVtpUini'S"We?;\fu9t^FW3Oq&A\TRItdPK[/=SH:SP9[Ei3]c$-#L,=X6-H[>eE7!hVZaeor2Pb_*YH3I!aU84L,8-t5re"mj$G6KX!3^)>,PIdmS%l.>W?0BIIQ7"0eoibKlmFueeJ_?kb?Ds>NfiLj16^Qa6W+hLX9]8RS3V"&M4<-=WP2\k]>4BL'H4(""]iGtaKnN/=9B*/)2K?`Qt@0`qWYqX*NhJMd:]Ef>j;.);=-5X0`oE-Q4PL/3*dVCdu^;[KuH$Y\K.D.Pg_]MEUMFp1;?l,0OMo+:NVsm`_8IA0%EVW^O&(qG_m#.`o\h"bA(!,C#+*Nkj_0mZ*8:olsX+[Wc[1`#h\1ZeOWp>=/5S-IGP7DZ(cjKk3HMRg8l!HY\E_Y"rH6=Q`=k'PiFi;dE+LMmO5k]4V@>]qQ+*4*k-?-7.H$[qXgMV7mq]7!uOeDW@t4Z#Z^G+-LRihiFU.>u7A0uLaIQ:8?$4f05nZaOCssH2)o'+0R>65Sst8aMgb@QVGAZ'VPc8OcE!\m2WZ36*s.j/ri'HI'-)[6ndXrW@?KB,qOk;>PJm]5m)e@i.'0G0%lPt#!5W[F(]NG?2\S7T^NlaVa0g_(=\'rV:]2C;fl+#fHrg/p0-!hnK$`O2jIbgK2FnuFPB<<"`;9G,S!nJ/289O!X`5JQ+e>/!61-qe<>N`%_:>`/,0kS`o[Wg2$F`("hKu/G(glq?/?>S'*Vp-K+WoPgfEN:>UspD?(AYfR+Q4_8>cJUUTTJdhfNF^2X<9H/#k1b\4U4G6jpYT(cYU7NK,2'3\a*%=f7-jZ^H'XR.3-mEJ6J#/X)Ng1A[;-YeeS?1N4@(;XF*GKq,t`>%(:".4Q!ITJHZ$3d5AZ0QEn66e-c@&27G\r^N1+Aq_P<[1o*Oq,nkj#`XCeQAP3$;g=<+6P"GL4*$%EQeaCc_2C=FZ93rsRLC2RY7Z,+N%kMgP*&+`@A"ngQN'?V2qFK[=Um%ZT3Qa05&7/4]sVVB=.-AZa;JUZ-;$i"Zbc<=[qOU*h:>o_Bl/J2`<[(cH!)V=$=\:-;H*tR<]XGgM)'U+QQ,uS(1-"k\^Mrq:Fk22")Ftr+DgI"UN#Y7RR)`Kd&qmOTm]4f>$Yu?k:"\,i-<"OW(:2SB<0C:2NB\GP-F@Sm]o?Y\^\6XU568Z8f=qeaYci*m=brEh0Z*TQ+TD.FVZ?V6HSg"F7,AibbGIlh.^t?](DF`*">Ne/*oeI_h]=h.t-H-W!CM#>Vdrockk*Z]!\h>3Gj$(bhmU$:q\mSt)HITjj,4b!)mF>#8cd<37;8[!)oI.p#[C,jKQ[-b%_gFXp2"*qrVXlU8e;s9d9Qt,+ac,nV9M]:Xac)WZIG\X!W?:FRRF]SqOr8$_"hLVR6bPSQ0\`.?4=10Vf9=FrAC?fSm6\kRbe_JEZ9.tjKKbJM+FbHfb:CE@d:l0lFpe4H/6BfN;Aun_%;9c\VpLtF&)O`sq1m7<6Z\dG*rRdbYX;Om%EgW+8/0[PIn#2XB$>+!m;t8p/DjBSCijp8MTat)0J'NJ,I%$YHS"gbT>p\Jf'2iu2o17[%.7%bnn8%;k6C`+X\g8qd_8FBf>dYu1qfC#i2U(0b%DFbU0W1Oi,pc'H:jA;F;pL[V<%`YEot1Ueu-@HJ8&dM:NX@p;6]B(HuT6gU-(CnOSic+eZb[^&,,!b5rIZ"mhs2lM~>endstream +endobj +45 0 obj +<< +/Filter [ /ASCII85Decode /FlateDecode ] /Length 2627 +>> +stream +Gat=->ArQ1&q9SY(n`ijDbn63PUMAWd3<_E]02Y7fo9F5J7#[hP,QpMX%U#e&*LEo+XL!M2m-sA(L*YQ0)UGBOs:/FJ!g3WAH4rsi9CaR`aSN?bU"mCDW0d/m.77huRh&ch1\2_0gBRH[QDDc@'rl,hj1*[uRL-hSij[Qi&irlaVV;`T>@=7GWZY0sKRnXT!b#\&uDG6ZA!M8pBX^R1X2mM<)OmBVin>n#9)'ouFNt,2fY-%`6*qEJ`_?OuPX:OF_?P+p.CTA1?<[4s25dDiaWr64bJ,M-T%W_Yht*G9,i@5h(99p;ir#6bRf`EGUM[U*8hf$Q1_5O(gjmKHL\qt4(Ids16hD(ADRrCN2Xo(X&E>^jii4G;!r!#N78niM^O1M3FU1j#ZUE'.?'0kQ;MB6kj;P6QA%WJLKb>sRGofIuC`&u%/NQ1"R-i<)Y1"YRQZq&`b>and?_>ufIMtY[s%sK$<"@b,]ESB,c,.lMV];4[=QQ$$+&18$?AO+V[r]&2FcFA),5L+Y.fC"d]A!3"jo?JF"'5aZYAE\lParICiPe"+7\"@UUU;Mj$d.\e9J`EnN;"EWf_-"8"@?ERpG4&UrE_8UA/QAV>tiKoc!sVfdek>$]2E[Wu$-;:R!i8JjI7%mO6BWkghOlkj%g-a'Yq/6ZO^]\k^Nr["ak=@Q8HGtt@d:.HW+7h];:(f'=)9`4[V2HtS/"bT=69$utN_@mMTu&cSmZ:0O]8H2P4aORrb:.1G(Y!4@PsY,pj#?QeDE=\:?j2;NrYkcaFU@tQkE5"rE)5U/j,jDXW&WQ]12X7A2UkZ2(NjtqFq=N'MRZO+e;R&<:W4#>[N:&o&2n9&"CkmEPR&.'nPeZXJ(=o&ea`?j@<)BT1d:p!ksG^;/QI;lO]!PBZ)-&XKrEfTcVXKr=QZ^GtC2U$MRbLLO:H$@feems1>[6fb.W7QSJ1*85;Zr!@920Kjq^c:m/#g7.oHWW._:mjO`%c,f?NWS-mnV<.tf:8VXALb$sW,L0Lrt;B'U\n'2/(H>_a_)JW.g'qA+qtl=E-"1eoT`OVq!Q*3hfCb^fPUL^iW\4ijun/Z,V\_%-Y6%m1EU-\as*f*IUi&kJN]Dc7BqJ`D%a!H20GdQ;mq\ao.$'V:!_F3[\WTb2kSQODHRc+aLe\ESFY&=N2ie8Y5n`Mfe+G6jR?[+9Djm0L-g2F+Zbd1nrY'ncIfkTggr]E&bRm`f/H!V;?mEdatdHf)+;K8R&$D;aljH=!SZsmaJaa.*?D[f?W-JU"+j_,gaiJ;XLnukY[tD\[kYq[c_ej8,6"]^\cepQ)B)`mtuN2s_hWc-S*n<2t.aE;DQ=8dG-P=0P``Hb0ce\EeT^-EG\Goc)5eG>_ZTM8b0D.jjc-+qmZa)sVbi6"*;e`$n]iMafS/T@7@ebrI%T&]%8pAjL:]6Ys40[FU$]endstream +endobj +xref +0 46 +0000000000 65535 f +0000000061 00000 n +0000000133 00000 n +0000000240 00000 n +0000000352 00000 n +0000000467 00000 n +0000000672 00000 n +0000000877 00000 n +0000001082 00000 n +0000001192 00000 n +0000001397 00000 n +0000001475 00000 n +0000001681 00000 n +0000001887 00000 n +0000002093 00000 n +0000002299 00000 n +0000002505 00000 n +0000002711 00000 n +0000002917 00000 n +0000003123 00000 n +0000003329 00000 n +0000003535 00000 n +0000003741 00000 n +0000003947 00000 n +0000004153 00000 n +0000004359 00000 n +0000004429 00000 n +0000004710 00000 n +0000004890 00000 n +0000007994 00000 n +0000008931 00000 n +0000011388 00000 n +0000014864 00000 n +0000018008 00000 n +0000022131 00000 n +0000023600 00000 n +0000026271 00000 n +0000027288 00000 n +0000030265 00000 n +0000031773 00000 n +0000034257 00000 n +0000037186 00000 n +0000040935 00000 n +0000042382 00000 n +0000045335 00000 n +0000048456 00000 n +trailer +<< +/ID +[] +% ReportLab generated PDF document -- digest (opensource) + +/Info 26 0 R +/Root 25 0 R +/Size 46 +>> +startxref +51175 +%%EOF diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_hex_inverter_pcb_prototype_p1_rev2/mic_hex_inverter_pcb_prototype_p1_rev2.kicad_pcb b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_hex_inverter_pcb_prototype_p1_rev2/mic_hex_inverter_pcb_prototype_p1_rev2.kicad_pcb new file mode 100755 index 0000000..2b8ba10 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_hex_inverter_pcb_prototype_p1_rev2/mic_hex_inverter_pcb_prototype_p1_rev2.kicad_pcb @@ -0,0 +1,2 @@ +(kicad_pcb (version 20221018) (generator pcbnew) +) \ No newline at end of file diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_hex_inverter_pcb_prototype_p1_rev2/mic_hex_inverter_pcb_prototype_p1_rev2.kicad_prl b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_hex_inverter_pcb_prototype_p1_rev2/mic_hex_inverter_pcb_prototype_p1_rev2.kicad_prl new file mode 100755 index 0000000..1a5ade1 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_hex_inverter_pcb_prototype_p1_rev2/mic_hex_inverter_pcb_prototype_p1_rev2.kicad_prl @@ -0,0 +1,77 @@ +{ + "board": { + "active_layer": 0, + "active_layer_preset": "", + "auto_track_width": true, + "hidden_netclasses": [], + "hidden_nets": [], + "high_contrast_mode": 0, + "net_color_mode": 1, + "opacity": { + "images": 0.6, + "pads": 1.0, + "tracks": 1.0, + "vias": 1.0, + "zones": 0.6 + }, + "selection_filter": { + "dimensions": true, + "footprints": true, + "graphics": true, + "keepouts": true, + "lockedItems": false, + "otherItems": true, + "pads": true, + "text": true, + "tracks": true, + "vias": true, + "zones": true + }, + "visible_items": [ + 0, + 1, + 2, + 3, + 4, + 5, + 8, + 9, + 10, + 11, + 12, + 13, + 15, + 16, + 17, + 18, + 19, + 20, + 21, + 22, + 23, + 24, + 25, + 26, + 27, + 28, + 29, + 30, + 32, + 33, + 34, + 35, + 36, + 39, + 40 + ], + "visible_layers": "fffffff_ffffffff", + "zone_display_mode": 0 + }, + "meta": { + "filename": "mic_hex_inverter_pcb_prototype_p1_rev2.kicad_prl", + "version": 3 + }, + "project": { + "files": [] + } +} diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_hex_inverter_pcb_prototype_p1_rev2/mic_hex_inverter_pcb_prototype_p1_rev2.kicad_pro b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_hex_inverter_pcb_prototype_p1_rev2/mic_hex_inverter_pcb_prototype_p1_rev2.kicad_pro new file mode 100755 index 0000000..81862a3 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_hex_inverter_pcb_prototype_p1_rev2/mic_hex_inverter_pcb_prototype_p1_rev2.kicad_pro @@ -0,0 +1,332 @@ +{ + "board": { + "3dviewports": [], + "design_settings": { + "defaults": { + "board_outline_line_width": 0.1, + "copper_line_width": 0.2, + "copper_text_size_h": 1.5, + "copper_text_size_v": 1.5, + "copper_text_thickness": 0.3, + "other_line_width": 0.15, + "silk_line_width": 0.15, + "silk_text_size_h": 1.0, + "silk_text_size_v": 1.0, + "silk_text_thickness": 0.15 + }, + "diff_pair_dimensions": [], + "drc_exclusions": [], + "rules": { + "min_copper_edge_clearance": 0.0, + "solder_mask_clearance": 0.0, + "solder_mask_min_width": 0.0 + }, + "track_widths": [], + "via_dimensions": [] + }, + "layer_presets": [], + "viewports": [] + }, + "boards": [], + "cvpcb": { + "equivalence_files": [] + }, + "erc": { + "erc_exclusions": [], + "meta": { + "version": 0 + }, + "pin_map": [ + [ + 0, + 0, + 0, + 0, + 0, + 0, + 1, + 0, + 0, + 0, + 0, + 2 + ], + [ + 0, + 2, + 0, + 1, + 0, + 0, + 1, + 0, + 2, + 2, + 2, + 2 + ], + [ + 0, + 0, + 0, + 0, + 0, + 0, + 1, + 0, + 1, + 0, + 1, + 2 + ], + [ + 0, + 1, + 0, + 0, + 0, + 0, + 1, + 1, + 2, + 1, + 1, + 2 + ], + [ + 0, + 0, + 0, + 0, + 0, + 0, + 1, + 0, + 0, + 0, + 0, + 2 + ], + [ + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 2 + ], + [ + 1, + 1, + 1, + 1, + 1, + 0, + 1, + 1, + 1, + 1, + 1, + 2 + ], + [ + 0, + 0, + 0, + 1, + 0, + 0, + 1, + 0, + 0, + 0, + 0, + 2 + ], + [ + 0, + 2, + 1, + 2, + 0, + 0, + 1, + 0, + 2, + 2, + 2, + 2 + ], + [ + 0, + 2, + 0, + 1, + 0, + 0, + 1, + 0, + 2, + 0, + 0, + 2 + ], + [ + 0, + 2, + 1, + 1, + 0, + 0, + 1, + 0, + 2, + 0, + 0, + 2 + ], + [ + 2, + 2, + 2, + 2, + 2, + 2, + 2, + 2, + 2, + 2, + 2, + 2 + ] + ], + "rule_severities": { + "bus_definition_conflict": "error", + "bus_entry_needed": "error", + "bus_to_bus_conflict": "error", + "bus_to_net_conflict": "error", + "conflicting_netclasses": "error", + "different_unit_footprint": "error", + "different_unit_net": "error", + "duplicate_reference": "error", + "duplicate_sheet_names": "error", + "endpoint_off_grid": "warning", + "extra_units": "error", + "global_label_dangling": "warning", + "hier_label_mismatch": "error", + "label_dangling": "error", + "lib_symbol_issues": "warning", + "missing_bidi_pin": "warning", + "missing_input_pin": "warning", + "missing_power_pin": "error", + "missing_unit": "warning", + "multiple_net_names": "warning", + "net_not_bus_member": "warning", + "no_connect_connected": "warning", + "no_connect_dangling": "warning", + "pin_not_connected": "error", + "pin_not_driven": "error", + "pin_to_pin": "warning", + "power_pin_not_driven": "error", + "similar_labels": "warning", + "simulation_model_issue": "ignore", + "unannotated": "error", + "unit_value_mismatch": "error", + "unresolved_variable": "error", + "wire_dangling": "error" + } + }, + "libraries": { + "pinned_footprint_libs": [], + "pinned_symbol_libs": [] + }, + "meta": { + "filename": "mic_hex_inverter_pcb_prototype_p1_rev2.kicad_pro", + "version": 1 + }, + "net_settings": { + "classes": [ + { + "bus_width": 12, + "clearance": 0.2, + "diff_pair_gap": 0.25, + "diff_pair_via_gap": 0.25, + "diff_pair_width": 0.2, + "line_style": 0, + "microvia_diameter": 0.3, + "microvia_drill": 0.1, + "name": "Default", + "pcb_color": "rgba(0, 0, 0, 0.000)", + "schematic_color": "rgba(0, 0, 0, 0.000)", + "track_width": 0.25, + "via_diameter": 0.8, + "via_drill": 0.4, + "wire_width": 6 + } + ], + "meta": { + "version": 3 + }, + "net_colors": null, + "netclass_assignments": null, + "netclass_patterns": [] + }, + "pcbnew": { + "last_paths": { + "gencad": "", + "idf": "", + "netlist": "", + "specctra_dsn": "", + "step": "", + "vrml": "" + }, + "page_layout_descr_file": "" + }, + "schematic": { + "annotate_start_num": 0, + "drawing": { + "dashed_lines_dash_length_ratio": 12.0, + "dashed_lines_gap_length_ratio": 3.0, + "default_line_thickness": 6.0, + "default_text_size": 50.0, + "field_names": [], + "intersheets_ref_own_page": false, + "intersheets_ref_prefix": "", + "intersheets_ref_short": false, + "intersheets_ref_show": false, + "intersheets_ref_suffix": "", + "junction_size_choice": 3, + "label_size_ratio": 0.375, + "pin_symbol_size": 25.0, + "text_offset_ratio": 0.15 + }, + "legacy_lib_dir": "", + "legacy_lib_list": [], + "meta": { + "version": 1 + }, + "net_format_name": "", + "page_layout_descr_file": "", + "plot_directory": "", + "spice_current_sheet_as_root": false, + "spice_external_command": "spice \"%I\"", + "spice_model_current_sheet_as_root": true, + "spice_save_all_currents": false, + "spice_save_all_voltages": false, + "subpart_first_id": 65, + "subpart_id_separator": 0 + }, + "sheets": [ + [ + "3d8e7ae7-5f8e-4bf5-8c8e-786bf8970fd7", + "" + ] + ], + "text_variables": {} +} diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_hex_inverter_pcb_prototype_p1_rev2/mic_hex_inverter_pcb_prototype_p1_rev2.kicad_sch b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_hex_inverter_pcb_prototype_p1_rev2/mic_hex_inverter_pcb_prototype_p1_rev2.kicad_sch new file mode 100755 index 0000000..26dcb47 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_hex_inverter_pcb_prototype_p1_rev2/mic_hex_inverter_pcb_prototype_p1_rev2.kicad_sch @@ -0,0 +1,962 @@ +(kicad_sch (version 20230121) (generator eeschema) + + (uuid 3d8e7ae7-5f8e-4bf5-8c8e-786bf8970fd7) + + (paper "A4") + + (lib_symbols + (symbol "1N4148:1N4148" (pin_names hide) (in_bom yes) (on_board yes) + (property "Reference" "D" (at 11.43 5.08 0) + (effects (font (size 1.27 1.27)) (justify left top)) + ) + (property "Value" "1N4148" (at 11.43 2.54 0) + (effects (font (size 1.27 1.27)) (justify left top)) + ) + (property "Footprint" "DIOAD1068W53L380D172" (at 11.43 -97.46 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Datasheet" "https://www.onsemi.com/pub/Collateral/1N914-D.PDF" (at 11.43 -197.46 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Height" "" (at 11.43 -397.46 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Mouser Part Number" "512-1N4148" (at 11.43 -497.46 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Mouser Price/Stock" "https://www.mouser.co.uk/ProductDetail/onsemi-Fairchild/1N4148?qs=i4Fj9T%2FoRm8RMUhj5DeFQg%3D%3D" (at 11.43 -597.46 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Manufacturer_Name" "onsemi" (at 11.43 -697.46 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Manufacturer_Part_Number" "1N4148" (at 11.43 -797.46 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "ki_description" "Small Signal Diode, 100V 0.3A 2-Pin DO35" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (symbol "1N4148_1_1" + (polyline + (pts + (xy 2.54 0) + (xy 5.08 0) + ) + (stroke (width 0.254) (type default)) + (fill (type none)) + ) + (polyline + (pts + (xy 5.08 2.54) + (xy 5.08 -2.54) + ) + (stroke (width 0.254) (type default)) + (fill (type none)) + ) + (polyline + (pts + (xy 10.16 0) + (xy 12.7 0) + ) + (stroke (width 0.254) (type default)) + (fill (type none)) + ) + (polyline + (pts + (xy 5.08 0) + (xy 10.16 2.54) + (xy 10.16 -2.54) + (xy 5.08 0) + ) + (stroke (width 0.254) (type default)) + (fill (type outline)) + ) + (pin passive line (at 0 0 0) (length 2.54) + (name "K" (effects (font (size 1.27 1.27)))) + (number "1" (effects (font (size 1.27 1.27)))) + ) + (pin passive line (at 15.24 0 180) (length 2.54) + (name "A" (effects (font (size 1.27 1.27)))) + (number "2" (effects (font (size 1.27 1.27)))) + ) + ) + ) + (symbol "ECE-A1VKS4R7:ECE-A1VKS4R7" (pin_names hide) (in_bom yes) (on_board yes) + (property "Reference" "C" (at 8.89 6.35 0) + (effects (font (size 1.27 1.27)) (justify left top)) + ) + (property "Value" "ECE-A1VKS4R7" (at 8.89 3.81 0) + (effects (font (size 1.27 1.27)) (justify left top)) + ) + (property "Footprint" "CAPPRD150W50D400H600" (at 8.89 -96.19 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Datasheet" "https://componentsearchengine.com/Datasheets/1/ECE-A1VKS4R7.pdf" (at 8.89 -196.19 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Height" "6" (at 8.89 -396.19 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Mouser Part Number" "667-ECE-A1VKS4R7" (at 8.89 -496.19 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Mouser Price/Stock" "https://www.mouser.com/Search/Refine.aspx?Keyword=667-ECE-A1VKS4R7" (at 8.89 -596.19 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Manufacturer_Name" "Panasonic" (at 8.89 -696.19 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Manufacturer_Part_Number" "ECE-A1VKS4R7" (at 8.89 -796.19 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "ki_description" "Aluminium Electrolytic Capacitor, Radial Lead, Low Profile, 85?C 1000h, 5mm Height" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (symbol "ECE-A1VKS4R7_1_1" + (polyline + (pts + (xy 2.54 0) + (xy 5.08 0) + ) + (stroke (width 0.254) (type default)) + (fill (type none)) + ) + (polyline + (pts + (xy 4.064 1.778) + (xy 4.064 0.762) + ) + (stroke (width 0.254) (type default)) + (fill (type none)) + ) + (polyline + (pts + (xy 4.572 1.27) + (xy 3.556 1.27) + ) + (stroke (width 0.254) (type default)) + (fill (type none)) + ) + (polyline + (pts + (xy 7.62 0) + (xy 10.16 0) + ) + (stroke (width 0.254) (type default)) + (fill (type none)) + ) + (polyline + (pts + (xy 7.62 2.54) + (xy 7.62 -2.54) + (xy 6.858 -2.54) + (xy 6.858 2.54) + (xy 7.62 2.54) + ) + (stroke (width 0.254) (type default)) + (fill (type outline)) + ) + (rectangle (start 5.08 2.54) (end 5.842 -2.54) + (stroke (width 0.254) (type default)) + (fill (type background)) + ) + (pin passive line (at 0 0 0) (length 2.54) + (name "+" (effects (font (size 1.27 1.27)))) + (number "1" (effects (font (size 1.27 1.27)))) + ) + (pin passive line (at 12.7 0 180) (length 2.54) + (name "-" (effects (font (size 1.27 1.27)))) + (number "2" (effects (font (size 1.27 1.27)))) + ) + ) + ) + (symbol "K102J20C0GH5TH5:K102J20C0GH5TH5" (pin_names hide) (in_bom yes) (on_board yes) + (property "Reference" "C" (at 8.89 6.35 0) + (effects (font (size 1.27 1.27)) (justify left top)) + ) + (property "Value" "K102J20C0GH5TH5" (at 8.89 3.81 0) + (effects (font (size 1.27 1.27)) (justify left top)) + ) + (property "Footprint" "K102J20C0GH5TH5" (at 8.89 -96.19 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Datasheet" "https://www.vishay.com/docs/45171/kseries.pdf" (at 8.89 -196.19 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Height" "7.6" (at 8.89 -396.19 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Mouser Part Number" "594-K102J20C0GH5TH5" (at 8.89 -496.19 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Mouser Price/Stock" "https://www.mouser.co.uk/ProductDetail/Vishay-BC-Components/K102J20C0GH5TH5?qs=sYfpZ29HcUR4LZTQqjYeyA%3D%3D" (at 8.89 -596.19 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Manufacturer_Name" "Vishay" (at 8.89 -696.19 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Manufacturer_Part_Number" "K102J20C0GH5TH5" (at 8.89 -796.19 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "ki_description" "Multilayer Ceramic Capacitors MLCC - Leaded 1000pF 100volts 5% C0G 5mm LS" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (symbol "K102J20C0GH5TH5_1_1" + (polyline + (pts + (xy 5.08 0) + (xy 5.588 0) + ) + (stroke (width 0.254) (type default)) + (fill (type none)) + ) + (polyline + (pts + (xy 5.588 2.54) + (xy 5.588 -2.54) + ) + (stroke (width 0.254) (type default)) + (fill (type none)) + ) + (polyline + (pts + (xy 7.112 0) + (xy 7.62 0) + ) + (stroke (width 0.254) (type default)) + (fill (type none)) + ) + (polyline + (pts + (xy 7.112 2.54) + (xy 7.112 -2.54) + ) + (stroke (width 0.254) (type default)) + (fill (type none)) + ) + (pin passive line (at 0 0 0) (length 5.08) + (name "1" (effects (font (size 1.27 1.27)))) + (number "1" (effects (font (size 1.27 1.27)))) + ) + (pin passive line (at 12.7 0 180) (length 5.08) + (name "2" (effects (font (size 1.27 1.27)))) + (number "2" (effects (font (size 1.27 1.27)))) + ) + ) + ) + (symbol "K104M20X7RH53L2:K104M20X7RH53L2" (pin_names hide) (in_bom yes) (on_board yes) + (property "Reference" "C" (at 8.89 6.35 0) + (effects (font (size 1.27 1.27)) (justify left top)) + ) + (property "Value" "K104M20X7RH53L2" (at 8.89 3.81 0) + (effects (font (size 1.27 1.27)) (justify left top)) + ) + (property "Footprint" "K104M20X7RH53L2" (at 8.89 -96.19 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Datasheet" "https://componentsearchengine.com/Datasheets/1/K104M20X7RH53L2.pdf" (at 8.89 -196.19 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Height" "6.7" (at 8.89 -396.19 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Mouser Part Number" "594-K104M20X7RH53L2" (at 8.89 -496.19 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Mouser Price/Stock" "https://www.mouser.co.uk/ProductDetail/Vishay-BC-Components/K104M20X7RH53L2?qs=SFC1ZZvMyCE87rbn3%2FQBJw%3D%3D" (at 8.89 -596.19 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Manufacturer_Name" "Vishay" (at 8.89 -696.19 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Manufacturer_Part_Number" "K104M20X7RH53L2" (at 8.89 -796.19 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "ki_description" "Multilayer Ceramic Capacitors MLCC - Leaded 0.1uF 100volts 20% X7R 2.5mm LS" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (symbol "K104M20X7RH53L2_1_1" + (polyline + (pts + (xy 5.08 0) + (xy 5.588 0) + ) + (stroke (width 0.254) (type default)) + (fill (type none)) + ) + (polyline + (pts + (xy 5.588 2.54) + (xy 5.588 -2.54) + ) + (stroke (width 0.254) (type default)) + (fill (type none)) + ) + (polyline + (pts + (xy 7.112 0) + (xy 7.62 0) + ) + (stroke (width 0.254) (type default)) + (fill (type none)) + ) + (polyline + (pts + (xy 7.112 2.54) + (xy 7.112 -2.54) + ) + (stroke (width 0.254) (type default)) + (fill (type none)) + ) + (pin passive line (at 0 0 0) (length 5.08) + (name "1" (effects (font (size 1.27 1.27)))) + (number "1" (effects (font (size 1.27 1.27)))) + ) + (pin passive line (at 12.7 0 180) (length 5.08) + (name "2" (effects (font (size 1.27 1.27)))) + (number "2" (effects (font (size 1.27 1.27)))) + ) + ) + ) + (symbol "MFS1_4DCT52A1002F:MFS1_4DCT52A1002F" (pin_names hide) (in_bom yes) (on_board yes) + (property "Reference" "R" (at 13.97 6.35 0) + (effects (font (size 1.27 1.27)) (justify left top)) + ) + (property "Value" "MFS1_4DCT52A1002F" (at 13.97 3.81 0) + (effects (font (size 1.27 1.27)) (justify left top)) + ) + (property "Footprint" "RESAD1020W45L320D175" (at 13.97 -96.19 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Datasheet" "https://componentsearchengine.com/Datasheets/1/MFS1_4DCT52A1002F.pdf" (at 13.97 -196.19 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Height" "" (at 13.97 -396.19 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Mouser Part Number" "660-MFS1/4DCT52A1002" (at 13.97 -496.19 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Mouser Price/Stock" "https://www.mouser.co.uk/ProductDetail/KOA-Speer/MFS1-4DCT52A1002F?qs=MQKPUGRr2Cy5Doqv6RTWfw%3D%3D" (at 13.97 -596.19 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Manufacturer_Name" "KOA Speer" (at 13.97 -696.19 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Manufacturer_Part_Number" "MFS1/4DCT52A1002F" (at 13.97 -796.19 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "ki_description" "Res Metal Film 10K Ohm 1% 0.25W(1/4W) +/-100ppm/C Conformal AXL Ammo Pack" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (symbol "MFS1_4DCT52A1002F_1_1" + (rectangle (start 5.08 1.27) (end 12.7 -1.27) + (stroke (width 0.254) (type default)) + (fill (type background)) + ) + (pin passive line (at 0 0 0) (length 5.08) + (name "1" (effects (font (size 1.27 1.27)))) + (number "1" (effects (font (size 1.27 1.27)))) + ) + (pin passive line (at 17.78 0 180) (length 5.08) + (name "2" (effects (font (size 1.27 1.27)))) + (number "2" (effects (font (size 1.27 1.27)))) + ) + ) + ) + (symbol "RGP0207CHK1G0:RGP0207CHK1G0" (pin_names hide) (in_bom yes) (on_board yes) + (property "Reference" "R" (at 13.97 6.35 0) + (effects (font (size 1.27 1.27)) (justify left top)) + ) + (property "Value" "RGP0207CHK1G0" (at 13.97 3.81 0) + (effects (font (size 1.27 1.27)) (justify left top)) + ) + (property "Footprint" "RESAD1650W70L650D250" (at 13.97 -96.19 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Datasheet" "https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Data+Sheet%7F1773267%7FC%7Fpdf%7FEnglish%7FENG_DS_1773267_C.pdf%7F1-1623708-2" (at 13.97 -196.19 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Height" "" (at 13.97 -396.19 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Mouser Part Number" "279-RGP0207CHK1G0" (at 13.97 -496.19 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Mouser Price/Stock" "https://www.mouser.co.uk/ProductDetail/TE-Connectivity-Holsworthy/RGP0207CHK1G0?qs=ip69W3eHERWnWvdTrALHzw%3D%3D" (at 13.97 -596.19 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Manufacturer_Name" "TE Connectivity" (at 13.97 -696.19 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Manufacturer_Part_Number" "RGP0207CHK1G0" (at 13.97 -796.19 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "ki_description" "TE Connectivity RGP0207CH Series Axial Thick Film Resistor 1G +/-10% 0.25W +/-350ppm/C" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (symbol "RGP0207CHK1G0_1_1" + (rectangle (start 5.08 1.27) (end 12.7 -1.27) + (stroke (width 0.254) (type default)) + (fill (type background)) + ) + (pin passive line (at 0 0 0) (length 5.08) + (name "1" (effects (font (size 1.27 1.27)))) + (number "1" (effects (font (size 1.27 1.27)))) + ) + (pin passive line (at 17.78 0 180) (length 5.08) + (name "2" (effects (font (size 1.27 1.27)))) + (number "2" (effects (font (size 1.27 1.27)))) + ) + ) + ) + (symbol "TC4584BF_EL_N_F_:TC4584BF_EL,N,F_" (in_bom yes) (on_board yes) + (property "Reference" "IC" (at 21.59 7.62 0) + (effects (font (size 1.27 1.27)) (justify left top)) + ) + (property "Value" "TC4584BF_EL,N,F_" (at 21.59 5.08 0) + (effects (font (size 1.27 1.27)) (justify left top)) + ) + (property "Footprint" "SOIC127P780X190-14N" (at 21.59 -94.92 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Datasheet" "" (at 21.59 -194.92 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Height" "1.9" (at 21.59 -394.92 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Mouser Part Number" "757-TC4584BFELNF" (at 21.59 -494.92 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Mouser Price/Stock" "https://www.mouser.co.uk/ProductDetail/Toshiba/TC4584BFELNF?qs=3kEcuH7qFhf5uJLuXNw2kw%3D%3D" (at 21.59 -594.92 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Manufacturer_Name" "Toshiba" (at 21.59 -694.92 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Manufacturer_Part_Number" "TC4584BF(EL,N,F)" (at 21.59 -794.92 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "ki_description" "Inverters CMOS Logic 6 Ch 0.51mA 60ns 18V" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (symbol "TC4584BF_EL,N,F__1_1" + (rectangle (start 5.08 2.54) (end 20.32 -17.78) + (stroke (width 0.254) (type default)) + (fill (type background)) + ) + (pin passive line (at 0 0 0) (length 5.08) + (name "I1" (effects (font (size 1.27 1.27)))) + (number "1" (effects (font (size 1.27 1.27)))) + ) + (pin passive line (at 25.4 -10.16 180) (length 5.08) + (name "O5" (effects (font (size 1.27 1.27)))) + (number "10" (effects (font (size 1.27 1.27)))) + ) + (pin passive line (at 25.4 -7.62 180) (length 5.08) + (name "I5" (effects (font (size 1.27 1.27)))) + (number "11" (effects (font (size 1.27 1.27)))) + ) + (pin passive line (at 25.4 -5.08 180) (length 5.08) + (name "O6" (effects (font (size 1.27 1.27)))) + (number "12" (effects (font (size 1.27 1.27)))) + ) + (pin passive line (at 25.4 -2.54 180) (length 5.08) + (name "I6" (effects (font (size 1.27 1.27)))) + (number "13" (effects (font (size 1.27 1.27)))) + ) + (pin passive line (at 25.4 0 180) (length 5.08) + (name "VDD" (effects (font (size 1.27 1.27)))) + (number "14" (effects (font (size 1.27 1.27)))) + ) + (pin passive line (at 0 -2.54 0) (length 5.08) + (name "O1" (effects (font (size 1.27 1.27)))) + (number "2" (effects (font (size 1.27 1.27)))) + ) + (pin passive line (at 0 -5.08 0) (length 5.08) + (name "I2" (effects (font (size 1.27 1.27)))) + (number "3" (effects (font (size 1.27 1.27)))) + ) + (pin passive line (at 0 -7.62 0) (length 5.08) + (name "O2" (effects (font (size 1.27 1.27)))) + (number "4" (effects (font (size 1.27 1.27)))) + ) + (pin passive line (at 0 -10.16 0) (length 5.08) + (name "I3" (effects (font (size 1.27 1.27)))) + (number "5" (effects (font (size 1.27 1.27)))) + ) + (pin passive line (at 0 -12.7 0) (length 5.08) + (name "O3" (effects (font (size 1.27 1.27)))) + (number "6" (effects (font (size 1.27 1.27)))) + ) + (pin passive line (at 0 -15.24 0) (length 5.08) + (name "VSS" (effects (font (size 1.27 1.27)))) + (number "7" (effects (font (size 1.27 1.27)))) + ) + (pin passive line (at 25.4 -15.24 180) (length 5.08) + (name "O4" (effects (font (size 1.27 1.27)))) + (number "8" (effects (font (size 1.27 1.27)))) + ) + (pin passive line (at 25.4 -12.7 180) (length 5.08) + (name "I4" (effects (font (size 1.27 1.27)))) + (number "9" (effects (font (size 1.27 1.27)))) + ) + ) + ) + (symbol "power:GND" (power) (pin_names (offset 0)) (in_bom yes) (on_board yes) + (property "Reference" "#PWR" (at 0 -6.35 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Value" "GND" (at 0 -3.81 0) + (effects (font (size 1.27 1.27))) + ) + (property "Footprint" "" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "ki_keywords" "global power" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "ki_description" "Power symbol creates a global label with name \"GND\" , ground" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (symbol "GND_0_1" + (polyline + (pts + (xy 0 0) + (xy 0 -1.27) + (xy 1.27 -1.27) + (xy 0 -2.54) + (xy -1.27 -1.27) + (xy 0 -1.27) + ) + (stroke (width 0) (type default)) + (fill (type none)) + ) + ) + (symbol "GND_1_1" + (pin power_in line (at 0 0 270) (length 0) hide + (name "GND" (effects (font (size 1.27 1.27)))) + (number "1" (effects (font (size 1.27 1.27)))) + ) + ) + ) + (symbol "power:GNDREF" (power) (pin_names (offset 0)) (in_bom yes) (on_board yes) + (property "Reference" "#PWR" (at 0 -6.35 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Value" "GNDREF" (at 0 -3.81 0) + (effects (font (size 1.27 1.27))) + ) + (property "Footprint" "" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "ki_keywords" "global power" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "ki_description" "Power symbol creates a global label with name \"GNDREF\" , reference supply ground" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (symbol "GNDREF_0_1" + (polyline + (pts + (xy -0.635 -1.905) + (xy 0.635 -1.905) + ) + (stroke (width 0) (type default)) + (fill (type none)) + ) + (polyline + (pts + (xy -0.127 -2.54) + (xy 0.127 -2.54) + ) + (stroke (width 0) (type default)) + (fill (type none)) + ) + (polyline + (pts + (xy 0 -1.27) + (xy 0 0) + ) + (stroke (width 0) (type default)) + (fill (type none)) + ) + (polyline + (pts + (xy 1.27 -1.27) + (xy -1.27 -1.27) + ) + (stroke (width 0) (type default)) + (fill (type none)) + ) + ) + (symbol "GNDREF_1_1" + (pin power_in line (at 0 0 270) (length 0) hide + (name "GNDREF" (effects (font (size 1.27 1.27)))) + (number "1" (effects (font (size 1.27 1.27)))) + ) + ) + ) + ) + + + (symbol (lib_id "K102J20C0GH5TH5:K102J20C0GH5TH5") (at 45.72 77.47 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced) + (uuid 22e449a2-a11a-46c1-8f23-c7cc7bfbf6b1) + (property "Reference" "C1" (at 52.07 69.85 0) + (effects (font (size 1.27 1.27))) + ) + (property "Value" "K102J20C0GH5TH5" (at 52.07 72.39 0) + (effects (font (size 1.27 1.27))) + ) + (property "Footprint" "1nF:K102J20C0GH5TH5" (at 54.61 173.66 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Datasheet" "https://www.vishay.com/docs/45171/kseries.pdf" (at 54.61 273.66 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Height" "7.6" (at 54.61 473.66 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Mouser Part Number" "594-K102J20C0GH5TH5" (at 54.61 573.66 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Mouser Price/Stock" "https://www.mouser.co.uk/ProductDetail/Vishay-BC-Components/K102J20C0GH5TH5?qs=sYfpZ29HcUR4LZTQqjYeyA%3D%3D" (at 54.61 673.66 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Manufacturer_Name" "Vishay" (at 54.61 773.66 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Manufacturer_Part_Number" "K102J20C0GH5TH5" (at 54.61 873.66 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (pin "1" (uuid 39d88e5b-add7-4cdd-a130-99ca6fcd5081)) + (pin "2" (uuid 0bc19385-03de-4e22-965d-547519479255)) + (instances + (project "mic_hex_inverter_pcb_prototype_p1_rev2" + (path "/3d8e7ae7-5f8e-4bf5-8c8e-786bf8970fd7" + (reference "C1") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "MFS1_4DCT52A1002F:MFS1_4DCT52A1002F") (at 67.31 57.15 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced) + (uuid 3f4c6269-37dc-46d3-bfd8-36203de663ad) + (property "Reference" "R3" (at 76.2 50.8 0) + (effects (font (size 1.27 1.27))) + ) + (property "Value" "MFS1_4DCT52A1002F" (at 76.2 53.34 0) + (effects (font (size 1.27 1.27))) + ) + (property "Footprint" "RESAD1020W45L320D175" (at 81.28 153.34 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Datasheet" "https://componentsearchengine.com/Datasheets/1/MFS1_4DCT52A1002F.pdf" (at 81.28 253.34 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Height" "" (at 81.28 453.34 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Mouser Part Number" "660-MFS1/4DCT52A1002" (at 81.28 553.34 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Mouser Price/Stock" "https://www.mouser.co.uk/ProductDetail/KOA-Speer/MFS1-4DCT52A1002F?qs=MQKPUGRr2Cy5Doqv6RTWfw%3D%3D" (at 81.28 653.34 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Manufacturer_Name" "KOA Speer" (at 81.28 753.34 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Manufacturer_Part_Number" "MFS1/4DCT52A1002F" (at 81.28 853.34 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (pin "2" (uuid e2c5b9d6-63a3-44fe-b4fe-cfdcee382961)) + (pin "1" (uuid c9d4be48-1180-4964-9b44-de754eeabf9f)) + (instances + (project "mic_hex_inverter_pcb_prototype_p1_rev2" + (path "/3d8e7ae7-5f8e-4bf5-8c8e-786bf8970fd7" + (reference "R3") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "power:GND") (at 130.81 100.33 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced) + (uuid 59fd0e9d-5c9d-4b3e-860a-5939259b96b7) + (property "Reference" "#PWR01" (at 130.81 106.68 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Value" "GND" (at 130.81 105.41 0) + (effects (font (size 1.27 1.27))) + ) + (property "Footprint" "" (at 130.81 100.33 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "" (at 130.81 100.33 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "1" (uuid 6b911d5f-a80c-421d-b690-2b7d2a4e53eb)) + (instances + (project "mic_hex_inverter_pcb_prototype_p1_rev2" + (path "/3d8e7ae7-5f8e-4bf5-8c8e-786bf8970fd7" + (reference "#PWR01") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "power:GNDREF") (at 160.02 104.14 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced) + (uuid 62f931f0-a996-4815-a68c-21a5a5a6a711) + (property "Reference" "#PWR02" (at 160.02 110.49 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Value" "GNDREF" (at 160.02 109.22 0) + (effects (font (size 1.27 1.27))) + ) + (property "Footprint" "" (at 160.02 104.14 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "" (at 160.02 104.14 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "1" (uuid 55ee2459-30ad-4be1-97b9-2eae5ea5016f)) + (instances + (project "mic_hex_inverter_pcb_prototype_p1_rev2" + (path "/3d8e7ae7-5f8e-4bf5-8c8e-786bf8970fd7" + (reference "#PWR02") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "K104M20X7RH53L2:K104M20X7RH53L2") (at 90.17 121.92 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced) + (uuid 6866677a-9022-4f56-abd1-326c2b7a34b9) + (property "Reference" "C3" (at 96.52 114.3 0) + (effects (font (size 1.27 1.27))) + ) + (property "Value" "K104M20X7RH53L2" (at 96.52 116.84 0) + (effects (font (size 1.27 1.27))) + ) + (property "Footprint" "K104M20X7RH53L2" (at 99.06 218.11 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Datasheet" "https://componentsearchengine.com/Datasheets/1/K104M20X7RH53L2.pdf" (at 99.06 318.11 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Height" "6.7" (at 99.06 518.11 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Mouser Part Number" "594-K104M20X7RH53L2" (at 99.06 618.11 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Mouser Price/Stock" "https://www.mouser.co.uk/ProductDetail/Vishay-BC-Components/K104M20X7RH53L2?qs=SFC1ZZvMyCE87rbn3%2FQBJw%3D%3D" (at 99.06 718.11 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Manufacturer_Name" "Vishay" (at 99.06 818.11 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Manufacturer_Part_Number" "K104M20X7RH53L2" (at 99.06 918.11 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (pin "1" (uuid 5248e17e-76b4-49fe-99ab-f1761bf2f535)) + (pin "2" (uuid 83b3c32d-d131-453a-aaa7-586403527be4)) + (instances + (project "mic_hex_inverter_pcb_prototype_p1_rev2" + (path "/3d8e7ae7-5f8e-4bf5-8c8e-786bf8970fd7" + (reference "C3") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "ECE-A1VKS4R7:ECE-A1VKS4R7") (at 80.01 106.68 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced) + (uuid 74aa9228-0e92-4727-a58a-f3737f9cb74f) + (property "Reference" "C5" (at 86.36 99.06 0) + (effects (font (size 1.27 1.27))) + ) + (property "Value" "ECE-A1VKS4R7" (at 86.36 101.6 0) + (effects (font (size 1.27 1.27))) + ) + (property "Footprint" "CAPPRD150W50D400H600" (at 88.9 202.87 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Datasheet" "https://componentsearchengine.com/Datasheets/1/ECE-A1VKS4R7.pdf" (at 88.9 302.87 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Height" "6" (at 88.9 502.87 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Mouser Part Number" "667-ECE-A1VKS4R7" (at 88.9 602.87 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Mouser Price/Stock" "https://www.mouser.com/Search/Refine.aspx?Keyword=667-ECE-A1VKS4R7" (at 88.9 702.87 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Manufacturer_Name" "Panasonic" (at 88.9 802.87 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Manufacturer_Part_Number" "ECE-A1VKS4R7" (at 88.9 902.87 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (pin "2" (uuid b3e5d868-8a07-45de-9d42-19c5577db9b7)) + (pin "1" (uuid 5e32bd9b-9423-4ba4-a120-ff8fea463833)) + (instances + (project "mic_hex_inverter_pcb_prototype_p1_rev2" + (path "/3d8e7ae7-5f8e-4bf5-8c8e-786bf8970fd7" + (reference "C5") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "RGP0207CHK1G0:RGP0207CHK1G0") (at 77.47 66.04 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced) + (uuid 7870ad85-eee6-4f2d-8a4c-8015f5bd7591) + (property "Reference" "R1" (at 86.36 59.69 0) + (effects (font (size 1.27 1.27))) + ) + (property "Value" "RGP0207CHK1G0" (at 86.36 62.23 0) + (effects (font (size 1.27 1.27))) + ) + (property "Footprint" "RESAD1650W70L650D250" (at 91.44 162.23 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Datasheet" "https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Data+Sheet%7F1773267%7FC%7Fpdf%7FEnglish%7FENG_DS_1773267_C.pdf%7F1-1623708-2" (at 91.44 262.23 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Height" "" (at 91.44 462.23 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Mouser Part Number" "279-RGP0207CHK1G0" (at 91.44 562.23 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Mouser Price/Stock" "https://www.mouser.co.uk/ProductDetail/TE-Connectivity-Holsworthy/RGP0207CHK1G0?qs=ip69W3eHERWnWvdTrALHzw%3D%3D" (at 91.44 662.23 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Manufacturer_Name" "TE Connectivity" (at 91.44 762.23 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Manufacturer_Part_Number" "RGP0207CHK1G0" (at 91.44 862.23 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (pin "1" (uuid 7c8a0086-12fb-401f-bed3-046eb915cad3)) + (pin "2" (uuid 3bc5a29f-7748-4436-81bb-7a83fa88405c)) + (instances + (project "mic_hex_inverter_pcb_prototype_p1_rev2" + (path "/3d8e7ae7-5f8e-4bf5-8c8e-786bf8970fd7" + (reference "R1") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "1N4148:1N4148") (at 59.69 93.98 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced) + (uuid 8db42d17-3faa-434e-b524-11eb8277fd34) + (property "Reference" "D2" (at 67.31 86.36 0) + (effects (font (size 1.27 1.27))) + ) + (property "Value" "1N4148" (at 67.31 88.9 0) + (effects (font (size 1.27 1.27))) + ) + (property "Footprint" "DIOAD1068W53L380D172" (at 71.12 191.44 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Datasheet" "https://www.onsemi.com/pub/Collateral/1N914-D.PDF" (at 71.12 291.44 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Height" "" (at 71.12 491.44 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Mouser Part Number" "512-1N4148" (at 71.12 591.44 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Mouser Price/Stock" "https://www.mouser.co.uk/ProductDetail/onsemi-Fairchild/1N4148?qs=i4Fj9T%2FoRm8RMUhj5DeFQg%3D%3D" (at 71.12 691.44 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Manufacturer_Name" "onsemi" (at 71.12 791.44 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Manufacturer_Part_Number" "1N4148" (at 71.12 891.44 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (pin "1" (uuid 21e214e2-c0be-40e9-8b29-0baefafd11f1)) + (pin "2" (uuid 2fbc079b-b248-4a69-b81c-1e3f4d3fb53d)) + (instances + (project "mic_hex_inverter_pcb_prototype_p1_rev2" + (path "/3d8e7ae7-5f8e-4bf5-8c8e-786bf8970fd7" + (reference "D2") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "TC4584BF_EL_N_F_:TC4584BF_EL,N,F_") (at 95.25 76.2 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced) + (uuid 9a7cccfc-d1a4-43b2-9663-cc694d018aa3) + (property "Reference" "IC1" (at 107.95 68.58 0) + (effects (font (size 1.27 1.27))) + ) + (property "Value" "TC4584BF_EL,N,F_" (at 107.95 71.12 0) + (effects (font (size 1.27 1.27))) + ) + (property "Footprint" "SOIC127P780X190-14N" (at 116.84 171.12 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Datasheet" "" (at 116.84 271.12 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Height" "1.9" (at 116.84 471.12 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Mouser Part Number" "757-TC4584BFELNF" (at 116.84 571.12 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Mouser Price/Stock" "https://www.mouser.co.uk/ProductDetail/Toshiba/TC4584BFELNF?qs=3kEcuH7qFhf5uJLuXNw2kw%3D%3D" (at 116.84 671.12 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Manufacturer_Name" "Toshiba" (at 116.84 771.12 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (property "Manufacturer_Part_Number" "TC4584BF(EL,N,F)" (at 116.84 871.12 0) + (effects (font (size 1.27 1.27)) (justify left top) hide) + ) + (pin "10" (uuid 5c9442fd-2a25-4127-8d7b-46332c1d54a8)) + (pin "7" (uuid 42705441-4995-44e8-aa18-8fe3d168c6c3)) + (pin "12" (uuid 9a834d6e-308a-4257-819e-3561c1be48db)) + (pin "5" (uuid 606de5b1-6225-4b0f-9c14-b47426b7c5c4)) + (pin "3" (uuid 9f90e1a4-48e8-485d-bca3-1e4ac672e3e9)) + (pin "11" (uuid 99e48c11-05ee-4bf7-a263-016e289dbe7f)) + (pin "1" (uuid db1bb896-8109-4d56-815e-1f7d1f7b54da)) + (pin "8" (uuid 682863fc-1aa2-495c-b156-0009220aedd1)) + (pin "6" (uuid 2e7277f1-b36b-48c5-9635-2379e016ed7a)) + (pin "2" (uuid 39349a63-b64b-4520-9433-eab60ccfca78)) + (pin "13" (uuid 8d59e8f5-afdb-4042-b676-f7541d249262)) + (pin "9" (uuid 4f87fdc9-8b23-4d27-8414-3da5fdea4f64)) + (pin "14" (uuid 635332b5-cc0b-4bef-93f2-46495d839a63)) + (pin "4" (uuid f3e0eb21-922c-4a42-9869-e6aa25ae6383)) + (instances + (project "mic_hex_inverter_pcb_prototype_p1_rev2" + (path "/3d8e7ae7-5f8e-4bf5-8c8e-786bf8970fd7" + (reference "IC1") (unit 1) + ) + ) + ) + ) + + (sheet_instances + (path "/" (page "1")) + ) +) diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/BOM_preamp_p2_2026-04-23.csv b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/BOM_preamp_p2_2026-04-23.csv new file mode 100644 index 0000000..c7c1839 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/BOM_preamp_p2_2026-04-23.csv @@ -0,0 +1,15 @@ +value,footprint,quantity,references +0.1uF,Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical,3,"['C13', 'C8', 'C1']" +2.2K,Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical,8,"['R16', 'R6', 'R19', 'R14', 'R9', 'R3', 'R13', 'R4']" +M2.5,MountingHole:MountingHole_2.7mm_M2.5_ISO14580,2,"['H1', 'H2']" +Conn_01x01_Pin,Library:conn_holepad,11,"['X1', 'X3B1', 'X3A1', 'X2B1', 'SGNL_A1', 'VCC_A2', 'SGNL_B1', 'GND_B1', 'GND_A1', 'VCC_B2', 'X2A1']" +47,Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical,4,"['R1', 'R12', 'R2', 'R11']" +47uF 35v,C47u35v:CAPPRD200W50D525H1250,6,"['C12', 'C9', 'C7', 'C5', 'C2', 'C14']" +47uF 63v,C47u63v:CAPPRD350W65D800H1250,4,"['C11', 'C4', 'C10', 'C3']" +1G,R1Go:RESAD1650W70L650D250,2,"['R20', 'R10']" +47K,Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical,4,"['R8', 'R18', 'R7', 'R17']" +12V,Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical,2,"['D1', 'D2']" +0.1uF,C.022uF50v:K223K15X7RF5UL2,1,['C6'] +200,Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical,2,"['R15', 'R5']" +Conn_01x01_Pin,Connector_Pin:Pin_D1.0mm_L10.0mm,2,"['VCC_A1', 'VCC_B1']" +OPA1642AID,opa1642:SOIC127P600X175-8N,2,"['IC2', 'IC1']" diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/fp-lib-table b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/fp-lib-table index ed01f9f..6010582 100644 --- a/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/fp-lib-table +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/fp-lib-table @@ -1,4 +1,9 @@ (fp_lib_table (version 7) - (lib (name "Library")(type "KiCad")(uri "${KIPRJMOD}/Library.pretty")(options "")(descr "")) + (lib (name "Library")(type "KiCad")(uri "${KIPRJMOD}/Library.pretty")(options "")(descr "Custom footprints (conn_holepad)")) + (lib (name "C47u35v")(type "KiCad")(uri "${KIPRJMOD}/C47u35v.pretty")(options "")(descr "47uF 35V electrolytic footprints (embedded in PCB)")) + (lib (name "C47u63v")(type "KiCad")(uri "${KIPRJMOD}/C47u63v.pretty")(options "")(descr "47uF 63V electrolytic footprints (embedded in PCB)")) + (lib (name "R1Go")(type "KiCad")(uri "${KIPRJMOD}/R1Go.pretty")(options "")(descr "1 GOhm resistor footprint (embedded in PCB)")) + (lib (name "opa1642")(type "KiCad")(uri "${KIPRJMOD}/opa1642.pretty")(options "")(descr "OPA1642AID SOIC-8 footprint (embedded in PCB)")) + (lib (name "C.022uF50v")(type "KiCad")(uri "${KIPRJMOD}/C.022uF50v.pretty")(options "")(descr "0.022uF 50V film cap footprint (embedded in PCB)")) ) diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/gerbers_v2/mic_preamp_pcb_prototype_p2-B_Cu.gbl b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/gerbers_v2/mic_preamp_pcb_prototype_p2-B_Cu.gbl new file mode 100644 index 0000000..07b9119 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/gerbers_v2/mic_preamp_pcb_prototype_p2-B_Cu.gbl @@ -0,0 +1,790 @@ +%TF.GenerationSoftware,KiCad,Pcbnew,9.0.8-1.fc42*% +%TF.CreationDate,2026-04-23T23:16:55+02:00*% +%TF.ProjectId,mic_preamp_pcb_prototype_p2,6d69635f-7072-4656-916d-705f7063625f,rev?*% +%TF.SameCoordinates,Original*% +%TF.FileFunction,Copper,L2,Bot*% +%TF.FilePolarity,Positive*% +%FSLAX46Y46*% +G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)* +G04 Created by KiCad (PCBNEW 9.0.8-1.fc42) date 2026-04-23 23:16:55* +%MOMM*% +%LPD*% +G01* +G04 APERTURE LIST* +%TA.AperFunction,ComponentPad*% +%ADD10C,1.400000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD11O,1.400000X1.400000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD12C,3.000000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD13R,1.100000X1.100000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD14C,1.100000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD15R,1.275000X1.275000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD16C,1.275000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD17C,1.350000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD18C,1.200000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD19C,2.000000*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD20R,0.650000X1.528000*% +%TD*% +%TA.AperFunction,ViaPad*% +%ADD21C,0.800000*% +%TD*% +%TA.AperFunction,Conductor*% +%ADD22C,0.250000*% +%TD*% +G04 APERTURE END LIST* +D10* +%TO.P,C13,1*% +%TO.N,Net-(VCC_B2-Pin_1)*% +X59400000Y-90120000D03* +D11* +%TO.P,C13,2*% +%TO.N,GND*% +X59400000Y-87580000D03* +%TD*% +D10* +%TO.P,R16,1*% +%TO.N,Net-(IC2-Pad6)*% +X64480000Y-97740000D03* +D11* +%TO.P,R16,2*% +%TO.N,Net-(C10-Pad2)*% +X67020000Y-97740000D03* +%TD*% +D12* +%TO.P,X1,1,Pin_1*% +%TO.N,GND*% +X72100000Y-156160000D03* +%TD*% +D10* +%TO.P,R1,1*% +%TO.N,Net-(C3-Pad1)*% +X87340000Y-128220000D03* +D11* +%TO.P,R1,2*% +%TO.N,Net-(X3A1-Pin_1)*% +X87340000Y-130760000D03* +%TD*% +D10* +%TO.P,R6,1*% +%TO.N,Net-(IC1-Pad6)*% +X77180000Y-97740000D03* +D11* +%TO.P,R6,2*% +%TO.N,Net-(C3-Pad2)*% +X79720000Y-97740000D03* +%TD*% +D10* +%TO.P,R19,1*% +%TO.N,Net-(C11-Pad2)*% +X64480000Y-102820000D03* +D11* +%TO.P,R19,2*% +%TO.N,Net-(IC2-Pad6)*% +X67020000Y-102820000D03* +%TD*% +D13* +%TO.P,C12,1*% +%TO.N,Net-(C12-Pad1)*% +X67020000Y-110440000D03* +D14* +%TO.P,C12,2*% +%TO.N,GND*% +X69020000Y-110440000D03* +%TD*% +D15* +%TO.P,C11,1*% +%TO.N,Net-(C11-Pad1)*% +X63520000Y-135840000D03* +D16* +%TO.P,C11,2*% +%TO.N,Net-(C11-Pad2)*% +X67020000Y-135840000D03* +%TD*% +D10* +%TO.P,R14,1*% +%TO.N,Net-(D2-K)*% +X61940000Y-120600000D03* +D11* +%TO.P,R14,2*% +%TO.N,Net-(C11-Pad1)*% +X61940000Y-123140000D03* +%TD*% +D13* +%TO.P,C9,1*% +%TO.N,Net-(D2-K)*% +X67020000Y-125680000D03* +D14* +%TO.P,C9,2*% +%TO.N,GND*% +X67020000Y-127680000D03* +%TD*% +D17* +%TO.P,R20,1*% +%TO.N,Net-(C12-Pad1)*% +X53690000Y-82500000D03* +%TO.P,R20,2*% +%TO.N,Net-(SGNL_B1-Pin_1)*% +X70190000Y-82500000D03* +%TD*% +%TO.P,R10,1*% +%TO.N,Net-(C5-Pad1)*% +X74010000Y-82500000D03* +%TO.P,R10,2*% +%TO.N,Net-(SGNL_A1-Pin_1)*% +X90510000Y-82500000D03* +%TD*% +D15* +%TO.P,C4,1*% +%TO.N,Net-(C4-Pad1)*% +X77180000Y-135840000D03* +D16* +%TO.P,C4,2*% +%TO.N,Net-(C4-Pad2)*% +X80680000Y-135840000D03* +%TD*% +D12* +%TO.P,X3B1,1,Pin_1*% +%TO.N,Net-(X3B1-Pin_1)*% +X61940000Y-156160000D03* +%TD*% +D10* +%TO.P,R12,1*% +%TO.N,Net-(C11-Pad1)*% +X61940000Y-128220000D03* +D11* +%TO.P,R12,2*% +%TO.N,Net-(X2B1-Pin_1)*% +X61940000Y-130760000D03* +%TD*% +D10* +%TO.P,R8,1*% +%TO.N,Net-(VCC_A2-Pin_1)*% +X82260000Y-95200000D03* +D11* +%TO.P,R8,2*% +%TO.N,Net-(C5-Pad1)*% +X84800000Y-95200000D03* +%TD*% +D10* +%TO.P,R2,1*% +%TO.N,Net-(C4-Pad1)*% +X82260000Y-128220000D03* +D11* +%TO.P,R2,2*% +%TO.N,Net-(X2A1-Pin_1)*% +X82260000Y-130760000D03* +%TD*% +D10* +%TO.P,D1,1,K*% +%TO.N,Net-(D1-K)*% +X82260000Y-115520000D03* +D11* +%TO.P,D1,2,A*% +%TO.N,GND*% +X82260000Y-112980000D03* +%TD*% +D18* +%TO.P,C6,1*% +%TO.N,Net-(VCC_A2-Pin_1)*% +X84800000Y-90120000D03* +%TO.P,C6,2*% +%TO.N,GND*% +X84800000Y-87620000D03* +%TD*% +D10* +%TO.P,R9,1*% +%TO.N,Net-(C4-Pad2)*% +X77180000Y-102820000D03* +D11* +%TO.P,R9,2*% +%TO.N,Net-(IC1-Pad6)*% +X79720000Y-102820000D03* +%TD*% +D10* +%TO.P,D2,1,K*% +%TO.N,Net-(D2-K)*% +X56860000Y-115520000D03* +D11* +%TO.P,D2,2,A*% +%TO.N,GND*% +X56860000Y-112980000D03* +%TD*% +D10* +%TO.P,R15,1*% +%TO.N,Net-(VCC_B2-Pin_1)*% +X61940000Y-105360000D03* +D11* +%TO.P,R15,2*% +%TO.N,Net-(D2-K)*% +X61940000Y-107900000D03* +%TD*% +D10* +%TO.P,C8,1*% +%TO.N,Net-(D2-K)*% +X61940000Y-115520000D03* +D11* +%TO.P,C8,2*% +%TO.N,GND*% +X61940000Y-112980000D03* +%TD*% +D10* +%TO.P,R5,1*% +%TO.N,Net-(VCC_A2-Pin_1)*% +X82260000Y-105360000D03* +D11* +%TO.P,R5,2*% +%TO.N,Net-(D1-K)*% +X82260000Y-107900000D03* +%TD*% +D12* +%TO.P,X3A1,1,Pin_1*% +%TO.N,Net-(X3A1-Pin_1)*% +X82260000Y-156160000D03* +%TD*% +D10* +%TO.P,R18,1*% +%TO.N,Net-(VCC_B2-Pin_1)*% +X59400000Y-95200000D03* +D11* +%TO.P,R18,2*% +%TO.N,Net-(C12-Pad1)*% +X61940000Y-95200000D03* +%TD*% +D13* +%TO.P,C7,1*% +%TO.N,Net-(VCC_A2-Pin_1)*% +X77180000Y-118060000D03* +D14* +%TO.P,C7,2*% +%TO.N,GND*% +X77180000Y-120060000D03* +%TD*% +D10* +%TO.P,R7,1*% +%TO.N,Net-(C5-Pad1)*% +X89880000Y-90120000D03* +D11* +%TO.P,R7,2*% +%TO.N,GND*% +X89880000Y-87580000D03* +%TD*% +D12* +%TO.P,X2B1,1,Pin_1*% +%TO.N,Net-(X2B1-Pin_1)*% +X67020000Y-156160000D03* +%TD*% +%TO.P,SGNL_A1,1,Pin_1*% +%TO.N,Net-(SGNL_A1-Pin_1)*% +X77180000Y-69800000D03* +%TD*% +D10* +%TO.P,C1,1*% +%TO.N,Net-(D1-K)*% +X87340000Y-115520000D03* +D11* +%TO.P,C1,2*% +%TO.N,GND*% +X87340000Y-112980000D03* +%TD*% +D12* +%TO.P,VCC_A2,1,Pin_1*% +%TO.N,Net-(VCC_A2-Pin_1)*% +X83530000Y-69800000D03* +%TD*% +%TO.P,SGNL_B1,1,Pin_1*% +%TO.N,Net-(SGNL_B1-Pin_1)*% +X67020000Y-69800000D03* +%TD*% +D15* +%TO.P,C10,1*% +%TO.N,Net-(C10-Pad1)*% +X63520000Y-146000000D03* +D16* +%TO.P,C10,2*% +%TO.N,Net-(C10-Pad2)*% +X67020000Y-146000000D03* +%TD*% +D10* +%TO.P,R3,1*% +%TO.N,Net-(D1-K)*% +X87340000Y-120600000D03* +D11* +%TO.P,R3,2*% +%TO.N,Net-(C3-Pad1)*% +X87340000Y-123140000D03* +%TD*% +D10* +%TO.P,R11,1*% +%TO.N,Net-(C10-Pad1)*% +X56860000Y-128220000D03* +D11* +%TO.P,R11,2*% +%TO.N,Net-(X3B1-Pin_1)*% +X56860000Y-130760000D03* +%TD*% +D12* +%TO.P,GND_B1,1,Pin_1*% +%TO.N,GND*% +X54320000Y-69800000D03* +%TD*% +D13* +%TO.P,C5,1*% +%TO.N,Net-(C5-Pad1)*% +X75180000Y-110440000D03* +D14* +%TO.P,C5,2*% +%TO.N,GND*% +X77180000Y-110440000D03* +%TD*% +D13* +%TO.P,C2,1*% +%TO.N,Net-(D1-K)*% +X77180000Y-125680000D03* +D14* +%TO.P,C2,2*% +%TO.N,GND*% +X77180000Y-127680000D03* +%TD*% +D12* +%TO.P,GND_A1,1,Pin_1*% +%TO.N,GND*% +X89880000Y-69800000D03* +%TD*% +D10* +%TO.P,R13,1*% +%TO.N,Net-(D2-K)*% +X56860000Y-120600000D03* +D11* +%TO.P,R13,2*% +%TO.N,Net-(C10-Pad1)*% +X56860000Y-123140000D03* +%TD*% +D12* +%TO.P,VCC_B2,1,Pin_1*% +%TO.N,Net-(VCC_B2-Pin_1)*% +X60670000Y-69800000D03* +%TD*% +D19* +%TO.P,VCC_A1,1,Pin_1*% +%TO.N,Net-(D1-K)*% +X87340000Y-107900000D03* +%TD*% +D10* +%TO.P,R17,1*% +%TO.N,Net-(C12-Pad1)*% +X54320000Y-87580000D03* +D11* +%TO.P,R17,2*% +%TO.N,GND*% +X54320000Y-90120000D03* +%TD*% +D15* +%TO.P,C3,1*% +%TO.N,Net-(C3-Pad1)*% +X77180000Y-146000000D03* +D16* +%TO.P,C3,2*% +%TO.N,Net-(C3-Pad2)*% +X80680000Y-146000000D03* +%TD*% +D10* +%TO.P,R4,1*% +%TO.N,Net-(D1-K)*% +X82260000Y-120600000D03* +D11* +%TO.P,R4,2*% +%TO.N,Net-(C4-Pad1)*% +X82260000Y-123140000D03* +%TD*% +D19* +%TO.P,VCC_B1,1,Pin_1*% +%TO.N,Net-(D2-K)*% +X56860000Y-107900000D03* +%TD*% +D13* +%TO.P,C14,1*% +%TO.N,Net-(VCC_B2-Pin_1)*% +X67020000Y-118060000D03* +D14* +%TO.P,C14,2*% +%TO.N,GND*% +X67020000Y-120060000D03* +%TD*% +D12* +%TO.P,X2A1,1,Pin_1*% +%TO.N,Net-(X2A1-Pin_1)*% +X77180000Y-156160000D03* +%TD*% +D20* +%TO.P,IC2,1*% +%TO.N,Net-(C11-Pad2)*% +X65115000Y-87409000D03* +%TO.P,IC2,2*% +X66385000Y-87409000D03* +%TO.P,IC2,3*% +%TO.N,Net-(SGNL_B1-Pin_1)*% +X67655000Y-87409000D03* +%TO.P,IC2,4*% +%TO.N,GND*% +X68925000Y-87409000D03* +%TO.P,IC2,5*% +%TO.N,Net-(C12-Pad1)*% +X68925000Y-92831000D03* +%TO.P,IC2,6*% +%TO.N,Net-(IC2-Pad6)*% +X67655000Y-92831000D03* +%TO.P,IC2,7*% +%TO.N,Net-(C10-Pad2)*% +X66385000Y-92831000D03* +%TO.P,IC2,8*% +%TO.N,Net-(VCC_B2-Pin_1)*% +X65115000Y-92831000D03* +%TD*% +%TO.P,IC1,1*% +%TO.N,Net-(C4-Pad2)*% +X75275000Y-87409000D03* +%TO.P,IC1,2*% +X76545000Y-87409000D03* +%TO.P,IC1,3*% +%TO.N,Net-(SGNL_A1-Pin_1)*% +X77815000Y-87409000D03* +%TO.P,IC1,4*% +%TO.N,GND*% +X79085000Y-87409000D03* +%TO.P,IC1,5*% +%TO.N,Net-(C5-Pad1)*% +X79085000Y-92831000D03* +%TO.P,IC1,6*% +%TO.N,Net-(IC1-Pad6)*% +X77815000Y-92831000D03* +%TO.P,IC1,7*% +%TO.N,Net-(C3-Pad2)*% +X76545000Y-92831000D03* +%TO.P,IC1,8*% +%TO.N,Net-(VCC_A2-Pin_1)*% +X75275000Y-92831000D03* +%TD*% +D21* +%TO.N,GND*% +X69020000Y-88803500D03* +X60095148Y-92286039D03* +%TO.N,Net-(C5-Pad1)*% +X78573700Y-94209900D03* +%TD*% +D22* +%TO.N,Net-(D1-K)*% +X78056900Y-124803000D02* +X82260000Y-120600000D01* +X77180000Y-125680000D02* +X77180000Y-124803000D01* +X77180000Y-124803000D02* +X78056900Y-124803000D01* +X87340000Y-115520000D02* +X82260000Y-115520000D01* +X82260000Y-107900000D02* +X87340000Y-107900000D01* +%TO.N,Net-(C3-Pad1)*% +X77180000Y-145036000D02* +X85825400Y-136390000D01* +X85825400Y-136390000D02* +X85825400Y-129735000D01* +X85825400Y-129735000D02* +X87340000Y-128220000D01* +X77180000Y-146000000D02* +X77180000Y-145036000D01* +%TO.N,GND*% +X89880000Y-87580000D02* +X91510000Y-85950000D01* +X79085000Y-87409000D02* +X79085000Y-87690300D01* +X68925000Y-88499900D02* +X68925000Y-87409000D01* +X79085000Y-87690300D02* +X78275400Y-88499900D01* +X67020000Y-120060000D02* +X77180000Y-120060000D01* +X61940000Y-112980000D02* +X56860000Y-112980000D01* +X69924700Y-109535000D02* +X69020000Y-110440000D01* +X67020000Y-127680000D02* +X77180000Y-127680000D01* +X89880000Y-87580000D02* +X88995000Y-86695000D01* +X69020000Y-88499900D02* +X69020000Y-88803500D01* +X82347100Y-90072900D02* +X84800000Y-87620000D01* +X66480000Y-112980000D02* +X61940000Y-112980000D01* +X62919800Y-90072900D02* +X82347100Y-90072900D01* +X69020000Y-110440000D02* +X66480000Y-112980000D01* +X77180000Y-110440000D02* +X76275300Y-109535000D01* +X59400000Y-87580000D02* +X60426900Y-87580000D01* +X69020000Y-88499900D02* +X68925000Y-88499900D01* +X91510000Y-71430000D02* +X89880000Y-69800000D01* +X76275300Y-109535000D02* +X69924700Y-109535000D01* +X91510000Y-85950000D02* +X91510000Y-71430000D01* +X56486039Y-92286039D02* +X54320000Y-90120000D01* +X79720000Y-112980000D02* +X77180000Y-110440000D01* +X78275400Y-88499900D02* +X69020000Y-88499900D01* +X82260000Y-112980000D02* +X79720000Y-112980000D01* +X60095148Y-92286039D02* +X56486039Y-92286039D01* +X79799000Y-86695000D02* +X79085000Y-87409000D01* +X88995000Y-86695000D02* +X79799000Y-86695000D01* +X60426900Y-87580000D02* +X62919800Y-90072900D01* +X87340000Y-112980000D02* +X82260000Y-112980000D01* +%TO.N,Net-(C3-Pad2)*% +X76122200Y-94344700D02* +X76545000Y-93921900D01* +X77636000Y-98797100D02* +X76729000Y-98797100D01* +X79720000Y-97740000D02* +X78693100Y-97740000D01* +X78693100Y-97740000D02* +X77636000Y-98797100D01* +X76729000Y-98797100D02* +X76122200Y-98190300D01* +X76122200Y-98190300D02* +X76122200Y-94344700D01* +X76545000Y-93921900D02* +X76545000Y-92831000D01* +%TO.N,Net-(C4-Pad1)*% +X77180000Y-135840000D02* +X77180000Y-133300000D01* +X77180000Y-133300000D02* +X82260000Y-128220000D01* +%TO.N,Net-(C4-Pad2)*% +X55385000Y-117185431D02* +X60915000Y-122715431D01* +X58314035Y-81500000D02* +X52845000Y-86969035D01* +X79717500Y-136802500D02* +X80680000Y-135840000D01* +X75275000Y-87409000D02* +X76545000Y-87409000D01* +X65695000Y-135876181D02* +X66621319Y-136802500D01* +X65695000Y-128344569D02* +X65695000Y-135876181D01* +X70636000Y-81500000D02* +X58314035Y-81500000D01* +X76545000Y-87409000D02* +X70636000Y-81500000D01* +X52845000Y-86969035D02* +X52845000Y-91821396D01* +X55385000Y-94361396D02* +X55385000Y-117185431D01* +X52845000Y-91821396D02* +X55385000Y-94361396D01* +X60915000Y-122715431D02* +X60915000Y-123564569D01* +X66621319Y-136802500D02* +X79717500Y-136802500D01* +X60915000Y-123564569D02* +X65695000Y-128344569D01* +%TO.N,Net-(C5-Pad1)*% +X79085000Y-94137900D02* +X82711000Y-94137900D01* +X83773100Y-95200000D02* +X84800000Y-95200000D01* +X84800000Y-95200000D02* +X89880000Y-90120000D01* +X79085000Y-94137900D02* +X79013000Y-94209900D01* +X79085000Y-92831000D02* +X79085000Y-94137900D01* +X79013000Y-94209900D02* +X78573700Y-94209900D01* +X82711000Y-94137900D02* +X83773100Y-95200000D01* +%TO.N,Net-(VCC_A2-Pin_1)*% +X78056900Y-118060000D02* +X81866900Y-114250000D01* +X88417300Y-113412000D02* +X88417300Y-112604000D01* +X87421100Y-111608000D02* +X84505100Y-111608000D01* +X81866900Y-114250000D02* +X87578800Y-114250000D01* +X83179900Y-91740100D02* +X84800000Y-90120000D01* +X88417300Y-112604000D02* +X87421100Y-111608000D01* +X81233100Y-106387000D02* +X82260000Y-105360000D01* +X75275000Y-92831000D02* +X75275000Y-91740100D01* +X77180000Y-118060000D02* +X78056900Y-118060000D01* +X75275000Y-91740100D02* +X83179900Y-91740100D01* +X87578800Y-114250000D02* +X88417300Y-113412000D01* +X81233100Y-108336000D02* +X81233100Y-106387000D01* +X84505100Y-111608000D02* +X81233100Y-108336000D01* +%TO.N,Net-(D2-K)*% +X56860000Y-115520000D02* +X61940000Y-115520000D01* +X61940000Y-107900000D02* +X56860000Y-107900000D01* +X67020000Y-124803000D02* +X66143100Y-124803000D01* +X66143100Y-124803000D02* +X61940000Y-120600000D01* +X67020000Y-125680000D02* +X67020000Y-124803000D01* +%TO.N,Net-(C10-Pad2)*% +X66385000Y-96078100D02* +X66385000Y-92831000D01* +X67020000Y-96713100D02* +X66385000Y-96078100D01* +X67020000Y-97740000D02* +X67020000Y-96713100D01* +%TO.N,Net-(C11-Pad2)*% +X55835000Y-112555431D02* +X55835000Y-115944569D01* +X53895431Y-86555000D02* +X53295000Y-87155431D01* +X66145000Y-125441379D02* +X66145000Y-134965000D01* +X66145000Y-134965000D02* +X67020000Y-135840000D01* +X64480000Y-102820000D02* +X64480000Y-111380000D01* +X53295000Y-91635000D02* +X64480000Y-102820000D01* +X64261000Y-86555000D02* +X53895431Y-86555000D01* +X64480000Y-111380000D02* +X63905000Y-111955000D01* +X65115000Y-87409000D02* +X64261000Y-86555000D01* +X63905000Y-111955000D02* +X56435431Y-111955000D01* +X56435431Y-111955000D02* +X55835000Y-112555431D01* +X62328621Y-121625000D02* +X66145000Y-125441379D01* +X53295000Y-87155431D02* +X53295000Y-91635000D01* +X61515431Y-121625000D02* +X62328621Y-121625000D01* +X66385000Y-87409000D02* +X65115000Y-87409000D01* +X55835000Y-115944569D02* +X61515431Y-121625000D01* +%TO.N,Net-(C12-Pad1)*% +X58364400Y-94781400D02* +X61405700Y-91740100D01* +X68925000Y-91740100D02* +X68925000Y-92831000D01* +X61405700Y-91740100D02* +X68925000Y-91740100D01* +X61405700Y-91740100D02* +X58480100Y-91740100D01* +X61940000Y-95200000D02* +X60913100Y-95200000D01* +X58364400Y-95715500D02* +X58364400Y-94781400D01* +X60913100Y-95200000D02* +X59867400Y-96245700D01* +X59867400Y-96245700D02* +X58894600Y-96245700D01* +X58894600Y-96245700D02* +X58364400Y-95715500D01* +X58480100Y-91740100D02* +X54320000Y-87580000D01* +%TO.N,Net-(VCC_B2-Pin_1)*% +X60678100Y-93921900D02* +X59400000Y-95200000D01* +X65115000Y-92831000D02* +X65115000Y-93921900D01* +X65115000Y-93921900D02* +X60678100Y-93921900D01* +%TO.N,Net-(SGNL_A1-Pin_1)*% +X77815000Y-87409000D02* +X77815000Y-86970000D01* +X77815000Y-86970000D02* +X82285000Y-82500000D01* +X82285000Y-82500000D02* +X90510000Y-82500000D01* +X77815000Y-70435000D02* +X77815000Y-87409000D01* +X77180000Y-69800000D02* +X77815000Y-70435000D01* +%TO.N,Net-(IC1-Pad6)*% +X77815000Y-96712000D02* +X80152400Y-96712000D01* +X80779900Y-97339500D02* +X80779900Y-100733000D01* +X80152400Y-96712000D02* +X80779900Y-97339500D01* +X77815000Y-97105000D02* +X77180000Y-97740000D01* +X77815000Y-92831000D02* +X77815000Y-96712000D01* +X77815000Y-96712000D02* +X77815000Y-97105000D01* +X79720000Y-101793000D02* +X79720000Y-102820000D01* +X80779900Y-100733000D02* +X79720000Y-101793000D01* +%TO.N,Net-(SGNL_B1-Pin_1)*% +X67655000Y-85035000D02* +X70190000Y-82500000D01* +X67655000Y-87409000D02* +X67655000Y-85035000D01* +%TO.N,Net-(IC2-Pad6)*% +X68061600Y-98175900D02* +X67451400Y-98786100D01* +X67655000Y-92831000D02* +X67655000Y-93921900D01* +X67655000Y-93921900D02* +X68061600Y-94328500D01* +X68061600Y-94328500D02* +X68061600Y-98175900D01* +X65526100Y-98786100D02* +X64480000Y-97740000D01* +X67451400Y-98786100D02* +X65526100Y-98786100D01* +%TD*% +M02* diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/gerbers_v2/mic_preamp_pcb_prototype_p2-B_Mask.gbs b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/gerbers_v2/mic_preamp_pcb_prototype_p2-B_Mask.gbs new file mode 100644 index 0000000..72a914c --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/gerbers_v2/mic_preamp_pcb_prototype_p2-B_Mask.gbs @@ -0,0 +1,318 @@ +%TF.GenerationSoftware,KiCad,Pcbnew,9.0.8-1.fc42*% +%TF.CreationDate,2026-04-23T23:16:55+02:00*% +%TF.ProjectId,mic_preamp_pcb_prototype_p2,6d69635f-7072-4656-916d-705f7063625f,rev?*% +%TF.SameCoordinates,Original*% +%TF.FileFunction,Soldermask,Bot*% +%TF.FilePolarity,Negative*% +%FSLAX46Y46*% +G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)* +G04 Created by KiCad (PCBNEW 9.0.8-1.fc42) date 2026-04-23 23:16:55* +%MOMM*% +%LPD*% +G01* +G04 APERTURE LIST* +%ADD10C,1.400000*% +%ADD11O,1.400000X1.400000*% +%ADD12O,3.500000X2.700000*% +%ADD13C,3.000000*% +%ADD14R,1.100000X1.100000*% +%ADD15C,1.100000*% +%ADD16R,1.275000X1.275000*% +%ADD17C,1.275000*% +%ADD18C,1.350000*% +%ADD19C,1.200000*% +%ADD20C,2.000000*% +%ADD21R,0.650000X1.528000*% +G04 APERTURE END LIST* +D10* +%TO.C,C13*% +X59400000Y-90120000D03* +D11* +X59400000Y-87580000D03* +%TD*% +D10* +%TO.C,R16*% +X64480000Y-97740000D03* +D11* +X67020000Y-97740000D03* +%TD*% +D12* +%TO.C,H1*% +X57495000Y-77591000D03* +%TD*% +D13* +%TO.C,X1*% +X72100000Y-156160000D03* +%TD*% +D10* +%TO.C,R1*% +X87340000Y-128220000D03* +D11* +X87340000Y-130760000D03* +%TD*% +D10* +%TO.C,R6*% +X77180000Y-97740000D03* +D11* +X79720000Y-97740000D03* +%TD*% +D10* +%TO.C,R19*% +X64480000Y-102820000D03* +D11* +X67020000Y-102820000D03* +%TD*% +D14* +%TO.C,C12*% +X67020000Y-110440000D03* +D15* +X69020000Y-110440000D03* +%TD*% +D16* +%TO.C,C11*% +X63520000Y-135840000D03* +D17* +X67020000Y-135840000D03* +%TD*% +D10* +%TO.C,R14*% +X61940000Y-120600000D03* +D11* +X61940000Y-123140000D03* +%TD*% +D14* +%TO.C,C9*% +X67020000Y-125680000D03* +D15* +X67020000Y-127680000D03* +%TD*% +D18* +%TO.C,R20*% +X53690000Y-82500000D03* +X70190000Y-82500000D03* +%TD*% +%TO.C,R10*% +X74010000Y-82500000D03* +X90510000Y-82500000D03* +%TD*% +D16* +%TO.C,C4*% +X77180000Y-135840000D03* +D17* +X80680000Y-135840000D03* +%TD*% +D13* +%TO.C,X3B1*% +X61940000Y-156160000D03* +%TD*% +D10* +%TO.C,R12*% +X61940000Y-128220000D03* +D11* +X61940000Y-130760000D03* +%TD*% +D10* +%TO.C,R8*% +X82260000Y-95200000D03* +D11* +X84800000Y-95200000D03* +%TD*% +D10* +%TO.C,R2*% +X82260000Y-128220000D03* +D11* +X82260000Y-130760000D03* +%TD*% +D10* +%TO.C,D1*% +X82260000Y-115520000D03* +D11* +X82260000Y-112980000D03* +%TD*% +D19* +%TO.C,C6*% +X84800000Y-90120000D03* +X84800000Y-87620000D03* +%TD*% +D12* +%TO.C,H2*% +X86495000Y-77591000D03* +%TD*% +D10* +%TO.C,R9*% +X77180000Y-102820000D03* +D11* +X79720000Y-102820000D03* +%TD*% +D10* +%TO.C,D2*% +X56860000Y-115520000D03* +D11* +X56860000Y-112980000D03* +%TD*% +D10* +%TO.C,R15*% +X61940000Y-105360000D03* +D11* +X61940000Y-107900000D03* +%TD*% +D10* +%TO.C,C8*% +X61940000Y-115520000D03* +D11* +X61940000Y-112980000D03* +%TD*% +D10* +%TO.C,R5*% +X82260000Y-105360000D03* +D11* +X82260000Y-107900000D03* +%TD*% +D13* +%TO.C,X3A1*% +X82260000Y-156160000D03* +%TD*% +D10* +%TO.C,R18*% +X59400000Y-95200000D03* +D11* +X61940000Y-95200000D03* +%TD*% +D14* +%TO.C,C7*% +X77180000Y-118060000D03* +D15* +X77180000Y-120060000D03* +%TD*% +D10* +%TO.C,R7*% +X89880000Y-90120000D03* +D11* +X89880000Y-87580000D03* +%TD*% +D13* +%TO.C,X2B1*% +X67020000Y-156160000D03* +%TD*% +%TO.C,SGNL_A1*% +X77180000Y-69800000D03* +%TD*% +D10* +%TO.C,C1*% +X87340000Y-115520000D03* +D11* +X87340000Y-112980000D03* +%TD*% +D13* +%TO.C,VCC_A2*% +X83530000Y-69800000D03* +%TD*% +%TO.C,SGNL_B1*% +X67020000Y-69800000D03* +%TD*% +D16* +%TO.C,C10*% +X63520000Y-146000000D03* +D17* +X67020000Y-146000000D03* +%TD*% +D10* +%TO.C,R3*% +X87340000Y-120600000D03* +D11* +X87340000Y-123140000D03* +%TD*% +D10* +%TO.C,R11*% +X56860000Y-128220000D03* +D11* +X56860000Y-130760000D03* +%TD*% +D13* +%TO.C,GND_B1*% +X54320000Y-69800000D03* +%TD*% +D14* +%TO.C,C5*% +X75180000Y-110440000D03* +D15* +X77180000Y-110440000D03* +%TD*% +D14* +%TO.C,C2*% +X77180000Y-125680000D03* +D15* +X77180000Y-127680000D03* +%TD*% +D13* +%TO.C,GND_A1*% +X89880000Y-69800000D03* +%TD*% +D10* +%TO.C,R13*% +X56860000Y-120600000D03* +D11* +X56860000Y-123140000D03* +%TD*% +D13* +%TO.C,VCC_B2*% +X60670000Y-69800000D03* +%TD*% +D20* +%TO.C,VCC_A1*% +X87340000Y-107900000D03* +%TD*% +D10* +%TO.C,R17*% +X54320000Y-87580000D03* +D11* +X54320000Y-90120000D03* +%TD*% +D16* +%TO.C,C3*% +X77180000Y-146000000D03* +D17* +X80680000Y-146000000D03* +%TD*% +D10* +%TO.C,R4*% +X82260000Y-120600000D03* +D11* +X82260000Y-123140000D03* +%TD*% +D20* +%TO.C,VCC_B1*% +X56860000Y-107900000D03* +%TD*% +D14* +%TO.C,C14*% +X67020000Y-118060000D03* +D15* +X67020000Y-120060000D03* +%TD*% +D13* +%TO.C,X2A1*% +X77180000Y-156160000D03* +%TD*% +D21* +%TO.C,IC2*% +X65115000Y-87409000D03* +X66385000Y-87409000D03* +X67655000Y-87409000D03* +X68925000Y-87409000D03* +X68925000Y-92831000D03* +X67655000Y-92831000D03* +X66385000Y-92831000D03* +X65115000Y-92831000D03* +%TD*% +%TO.C,IC1*% +X75275000Y-87409000D03* +X76545000Y-87409000D03* +X77815000Y-87409000D03* +X79085000Y-87409000D03* +X79085000Y-92831000D03* +X77815000Y-92831000D03* +X76545000Y-92831000D03* +X75275000Y-92831000D03* +%TD*% +M02* diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/gerbers_v2/mic_preamp_pcb_prototype_p2-B_Paste.gbp b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/gerbers_v2/mic_preamp_pcb_prototype_p2-B_Paste.gbp new file mode 100644 index 0000000..903ac07 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/gerbers_v2/mic_preamp_pcb_prototype_p2-B_Paste.gbp @@ -0,0 +1,37 @@ +%TF.GenerationSoftware,KiCad,Pcbnew,9.0.8-1.fc42*% +%TF.CreationDate,2026-04-23T23:16:55+02:00*% +%TF.ProjectId,mic_preamp_pcb_prototype_p2,6d69635f-7072-4656-916d-705f7063625f,rev?*% +%TF.SameCoordinates,Original*% +%TF.FileFunction,Paste,Bot*% +%TF.FilePolarity,Positive*% +%FSLAX46Y46*% +G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)* +G04 Created by KiCad (PCBNEW 9.0.8-1.fc42) date 2026-04-23 23:16:55* +%MOMM*% +%LPD*% +G01* +G04 APERTURE LIST* +%ADD10R,0.650000X1.528000*% +G04 APERTURE END LIST* +D10* +%TO.C,IC2*% +X65115000Y-87409000D03* +X66385000Y-87409000D03* +X67655000Y-87409000D03* +X68925000Y-87409000D03* +X68925000Y-92831000D03* +X67655000Y-92831000D03* +X66385000Y-92831000D03* +X65115000Y-92831000D03* +%TD*% +%TO.C,IC1*% +X75275000Y-87409000D03* +X76545000Y-87409000D03* +X77815000Y-87409000D03* +X79085000Y-87409000D03* +X79085000Y-92831000D03* +X77815000Y-92831000D03* +X76545000Y-92831000D03* +X75275000Y-92831000D03* +%TD*% +M02* diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/gerbers_v2/mic_preamp_pcb_prototype_p2-B_Silkscreen.gbo b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/gerbers_v2/mic_preamp_pcb_prototype_p2-B_Silkscreen.gbo new file mode 100644 index 0000000..2cffa7a --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/gerbers_v2/mic_preamp_pcb_prototype_p2-B_Silkscreen.gbo @@ -0,0 +1,196 @@ +%TF.GenerationSoftware,KiCad,Pcbnew,9.0.8-1.fc42*% +%TF.CreationDate,2026-04-23T23:16:55+02:00*% +%TF.ProjectId,mic_preamp_pcb_prototype_p2,6d69635f-7072-4656-916d-705f7063625f,rev?*% +%TF.SameCoordinates,Original*% +%TF.FileFunction,Legend,Bot*% +%TF.FilePolarity,Positive*% +%FSLAX46Y46*% +G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)* +G04 Created by KiCad (PCBNEW 9.0.8-1.fc42) date 2026-04-23 23:16:55* +%MOMM*% +%LPD*% +G01* +G04 APERTURE LIST* +%ADD10C,0.150000*% +%ADD11C,0.254000*% +%ADD12C,0.200000*% +G04 APERTURE END LIST* +D10* +X67952380Y-110917438D02* +X69095237Y-110917438D01* +X68523808Y-112917438D02* +X68523808Y-110917438D01* +X69666666Y-112346009D02* +X70619047Y-112346009D01* +X69476190Y-112917438D02* +X70142856Y-110917438D01* +X70142856Y-110917438D02* +X70809523Y-112917438D01* +X72428571Y-112917438D02* +X71476190Y-112917438D01* +X71476190Y-112917438D02* +X71476190Y-110917438D01* +X73000000Y-112346009D02* +X73952381Y-112346009D01* +X72809524Y-112917438D02* +X73476190Y-110917438D01* +X73476190Y-110917438D02* +X74142857Y-112917438D01* +X74714286Y-112822200D02* +X75000000Y-112917438D01* +X75000000Y-112917438D02* +X75476191Y-112917438D01* +X75476191Y-112917438D02* +X75666667Y-112822200D01* +X75666667Y-112822200D02* +X75761905Y-112726961D01* +X75761905Y-112726961D02* +X75857143Y-112536485D01* +X75857143Y-112536485D02* +X75857143Y-112346009D01* +X75857143Y-112346009D02* +X75761905Y-112155533D01* +X75761905Y-112155533D02* +X75666667Y-112060295D01* +X75666667Y-112060295D02* +X75476191Y-111965057D01* +X75476191Y-111965057D02* +X75095238Y-111869819D01* +X75095238Y-111869819D02* +X74904762Y-111774580D01* +X74904762Y-111774580D02* +X74809524Y-111679342D01* +X74809524Y-111679342D02* +X74714286Y-111488866D01* +X74714286Y-111488866D02* +X74714286Y-111298390D01* +X74714286Y-111298390D02* +X74809524Y-111107914D01* +X74809524Y-111107914D02* +X74904762Y-111012676D01* +X74904762Y-111012676D02* +X75095238Y-110917438D01* +X75095238Y-110917438D02* +X75571429Y-110917438D01* +X75571429Y-110917438D02* +X75857143Y-111012676D01* +D11* +X67594318Y-88880237D02* +X66324318Y-88880237D01* +X67473365Y-90210714D02* +X67533842Y-90150238D01* +X67533842Y-90150238D02* +X67594318Y-89968809D01* +X67594318Y-89968809D02* +X67594318Y-89847857D01* +X67594318Y-89847857D02* +X67533842Y-89666428D01* +X67533842Y-89666428D02* +X67412889Y-89545476D01* +X67412889Y-89545476D02* +X67291937Y-89484999D01* +X67291937Y-89484999D02* +X67050032Y-89424523D01* +X67050032Y-89424523D02* +X66868603Y-89424523D01* +X66868603Y-89424523D02* +X66626699Y-89484999D01* +X66626699Y-89484999D02* +X66505746Y-89545476D01* +X66505746Y-89545476D02* +X66384794Y-89666428D01* +X66384794Y-89666428D02* +X66324318Y-89847857D01* +X66324318Y-89847857D02* +X66324318Y-89968809D01* +X66324318Y-89968809D02* +X66384794Y-90150238D01* +X66384794Y-90150238D02* +X66445270Y-90210714D01* +X66445270Y-90694523D02* +X66384794Y-90754999D01* +X66384794Y-90754999D02* +X66324318Y-90875952D01* +X66324318Y-90875952D02* +X66324318Y-91178333D01* +X66324318Y-91178333D02* +X66384794Y-91299285D01* +X66384794Y-91299285D02* +X66445270Y-91359761D01* +X66445270Y-91359761D02* +X66566222Y-91420238D01* +X66566222Y-91420238D02* +X66687175Y-91420238D01* +X66687175Y-91420238D02* +X66868603Y-91359761D01* +X66868603Y-91359761D02* +X67594318Y-90634047D01* +X67594318Y-90634047D02* +X67594318Y-91420238D01* +X77754318Y-88880237D02* +X76484318Y-88880237D01* +X77633365Y-90210714D02* +X77693842Y-90150238D01* +X77693842Y-90150238D02* +X77754318Y-89968809D01* +X77754318Y-89968809D02* +X77754318Y-89847857D01* +X77754318Y-89847857D02* +X77693842Y-89666428D01* +X77693842Y-89666428D02* +X77572889Y-89545476D01* +X77572889Y-89545476D02* +X77451937Y-89484999D01* +X77451937Y-89484999D02* +X77210032Y-89424523D01* +X77210032Y-89424523D02* +X77028603Y-89424523D01* +X77028603Y-89424523D02* +X76786699Y-89484999D01* +X76786699Y-89484999D02* +X76665746Y-89545476D01* +X76665746Y-89545476D02* +X76544794Y-89666428D01* +X76544794Y-89666428D02* +X76484318Y-89847857D01* +X76484318Y-89847857D02* +X76484318Y-89968809D01* +X76484318Y-89968809D02* +X76544794Y-90150238D01* +X76544794Y-90150238D02* +X76605270Y-90210714D01* +X77754318Y-91420238D02* +X77754318Y-90694523D01* +X77754318Y-91057380D02* +X76484318Y-91057380D01* +X76484318Y-91057380D02* +X76665746Y-90936428D01* +X76665746Y-90936428D02* +X76786699Y-90815476D01* +X76786699Y-90815476D02* +X76847175Y-90694523D01* +D12* +%TO.C,IC2*% +X64440000Y-86645000D02* +X64440000Y-88172000D01* +X64568000Y-88522000D02* +X64568000Y-91718000D01* +X64568000Y-91718000D02* +X69472000Y-91718000D01* +X69472000Y-88522000D02* +X64568000Y-88522000D01* +X69472000Y-91718000D02* +X69472000Y-88522000D01* +%TO.C,IC1*% +X74600000Y-86645000D02* +X74600000Y-88172000D01* +X74728000Y-88522000D02* +X74728000Y-91718000D01* +X74728000Y-91718000D02* +X79632000Y-91718000D01* +X79632000Y-88522000D02* +X74728000Y-88522000D01* +X79632000Y-91718000D02* +X79632000Y-88522000D01* +%TD*% +M02* diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/gerbers_v2/mic_preamp_pcb_prototype_p2-Edge_Cuts.gm1 b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/gerbers_v2/mic_preamp_pcb_prototype_p2-Edge_Cuts.gm1 new file mode 100644 index 0000000..c8a874f --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/gerbers_v2/mic_preamp_pcb_prototype_p2-Edge_Cuts.gm1 @@ -0,0 +1,50 @@ +%TF.GenerationSoftware,KiCad,Pcbnew,9.0.8-1.fc42*% +%TF.CreationDate,2026-04-23T23:16:55+02:00*% +%TF.ProjectId,mic_preamp_pcb_prototype_p2,6d69635f-7072-4656-916d-705f7063625f,rev?*% +%TF.SameCoordinates,Original*% +%TF.FileFunction,Profile,NP*% +%FSLAX46Y46*% +G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)* +G04 Created by KiCad (PCBNEW 9.0.8-1.fc42) date 2026-04-23 23:16:55* +%MOMM*% +%LPD*% +G01* +G04 APERTURE LIST* +%TA.AperFunction,Profile*% +%ADD10C,0.100000*% +%TD*% +G04 APERTURE END LIST* +D10* +X51155914Y-66091802D02* +G75* +G02* +X52432248Y-64815514I1276386J-98D01* +G01* +X51155914Y-66091802D02* +X54923769Y-156333000D01* +X52432248Y-64815468D02* +X91578521Y-64817237D01* +X55015769Y-156333000D02* +X54923769Y-156333000D01* +X55015769Y-156333000D02* +G75* +G02* +X57972000Y-159289231I31J-2956200D01* +G01* +X57972000Y-159289231D02* +X86038769Y-159291000D01* +X86038769Y-159291000D02* +G75* +G02* +X88995000Y-156334769I2956331J-100D01* +G01* +X88995000Y-156334769D02* +X89087000Y-156334769D01* +X91578521Y-64817237D02* +G75* +G02* +X92854763Y-66093571I-121J-1276363D01* +G01* +X92854855Y-66093571D02* +X89087000Y-156334769D01* +M02* diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/gerbers_v2/mic_preamp_pcb_prototype_p2-F_Cu.gtl b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/gerbers_v2/mic_preamp_pcb_prototype_p2-F_Cu.gtl new file mode 100644 index 0000000..4ca402b --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/gerbers_v2/mic_preamp_pcb_prototype_p2-F_Cu.gtl @@ -0,0 +1,3048 @@ +%TF.GenerationSoftware,KiCad,Pcbnew,9.0.8-1.fc42*% +%TF.CreationDate,2026-04-23T23:16:55+02:00*% +%TF.ProjectId,mic_preamp_pcb_prototype_p2,6d69635f-7072-4656-916d-705f7063625f,rev?*% +%TF.SameCoordinates,Original*% +%TF.FileFunction,Copper,L1,Top*% +%TF.FilePolarity,Positive*% +%FSLAX46Y46*% +G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)* +G04 Created by KiCad (PCBNEW 9.0.8-1.fc42) date 2026-04-23 23:16:55* +%MOMM*% +%LPD*% +G01* +G04 APERTURE LIST* +%ADD10C,0.250000*% +%ADD11C,0.300000*% +%TA.AperFunction,ComponentPad*% +%ADD12C,1.400000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD13O,1.400000X1.400000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD14C,3.000000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD15R,1.100000X1.100000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD16C,1.100000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD17R,1.275000X1.275000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD18C,1.275000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD19C,1.350000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD20C,1.200000*% +%TD*% +%TA.AperFunction,ComponentPad*% +%ADD21C,2.000000*% +%TD*% +%TA.AperFunction,ViaPad*% +%ADD22C,0.800000*% +%TD*% +%TA.AperFunction,Conductor*% +%ADD23C,0.250000*% +%TD*% +G04 APERTURE END LIST* +D10* +G36* +X89441916Y-104397525D02* +G01* +X89433425Y-104397525D01* +X89401847Y-104381736D01* +X89386059Y-104350160D01* +X89386059Y-104218700D01* +X89400410Y-104189997D01* +X89441916Y-104397525D01* +G37* +G36* +X89441916Y-101826096D02* +G01* +X89433425Y-101826096D01* +X89401847Y-101810307D01* +X89386059Y-101778731D01* +X89386059Y-101647271D01* +X89400410Y-101618568D01* +X89441916Y-101826096D01* +G37* +G36* +X89693622Y-98973798D02* +G01* +X89758443Y-99006209D01* +X89777375Y-99025141D01* +X89802726Y-99075842D01* +X89802726Y-99112063D01* +X89777375Y-99162764D01* +X89758443Y-99181697D01* +X89693622Y-99214107D01* +X89531384Y-99254667D01* +X89324067Y-99254667D01* +X89161830Y-99214107D01* +X89097009Y-99181697D01* +X89078076Y-99162765D01* +X89052726Y-99112064D01* +X89052726Y-99075842D01* +X89078076Y-99025140D01* +X89097009Y-99006208D01* +X89161830Y-98973798D01* +X89324067Y-98933239D01* +X89531384Y-98933239D01* +X89693622Y-98973798D01* +G37* +G36* +X90177726Y-105582049D02* +G01* +X88677726Y-105582049D01* +X88677726Y-105046335D01* +X89136059Y-105046335D01* +X89136059Y-105189192D01* +X89138461Y-105213578D01* +X89140179Y-105217726D01* +X89140498Y-105222208D01* +X89149256Y-105245094D01* +X89196874Y-105340331D01* +X89199441Y-105344409D01* +X89200083Y-105346334D01* +X89202162Y-105348731D01* +X89209929Y-105361069D01* +X89221769Y-105371338D01* +X89232039Y-105383179D01* +X89244375Y-105390945D01* +X89246774Y-105393025D01* +X89248699Y-105393666D01* +X89252776Y-105396233D01* +X89348014Y-105443852D01* +X89370900Y-105452610D01* +X89375380Y-105452928D01* +X89379530Y-105454647D01* +X89403916Y-105457049D01* +X89451535Y-105457049D01* +X89475921Y-105454647D01* +X89480069Y-105452928D01* +X89484551Y-105452610D01* +X89507437Y-105443852D01* +X89602674Y-105396234D01* +X89606752Y-105393666D01* +X89608677Y-105393025D01* +X89611074Y-105390945D01* +X89623412Y-105383179D01* +X89633681Y-105371338D01* +X89645522Y-105361069D01* +X89653288Y-105348732D01* +X89655368Y-105346334D01* +X89656009Y-105344408D01* +X89658576Y-105340332D01* +X89706195Y-105245094D01* +X89714953Y-105222208D01* +X89715271Y-105217727D01* +X89716990Y-105213578D01* +X89719392Y-105189192D01* +X89719392Y-105075843D01* +X89735180Y-105044266D01* +X89761058Y-105031327D01* +X89786937Y-105044267D01* +X89802726Y-105075843D01* +X89802726Y-105207302D01* +X89768304Y-105276147D01* +X89759546Y-105299033D01* +X89756088Y-105347683D01* +X89771512Y-105393953D01* +X89803468Y-105430798D01* +X89847091Y-105452610D01* +X89895741Y-105456068D01* +X89942011Y-105440644D01* +X89978856Y-105408688D01* +X89991910Y-105387951D01* +X90039529Y-105292713D01* +X90048287Y-105269827D01* +X90048605Y-105265346D01* +X90050324Y-105261197D01* +X90052726Y-105236811D01* +X90052726Y-105046335D01* +X90050324Y-105021949D01* +X90048605Y-105017799D01* +X90048287Y-105013319D01* +X90039529Y-104990433D01* +X89991910Y-104895195D01* +X89989344Y-104891119D01* +X89988702Y-104889192D01* +X89986620Y-104886791D01* +X89978856Y-104874458D01* +X89967016Y-104864189D01* +X89956745Y-104852347D01* +X89944407Y-104844580D01* +X89942011Y-104842502D01* +X89940086Y-104841860D01* +X89936008Y-104839293D01* +X89840769Y-104791674D01* +X89817883Y-104782917D01* +X89813403Y-104782598D01* +X89809254Y-104780880D01* +X89784868Y-104778478D01* +X89737249Y-104778478D01* +X89712863Y-104780880D01* +X89708713Y-104782598D01* +X89704233Y-104782917D01* +X89681347Y-104791675D01* +X89586109Y-104839294D01* +X89582032Y-104841860D01* +X89580107Y-104842502D01* +X89577708Y-104844581D01* +X89565372Y-104852348D01* +X89555102Y-104864188D01* +X89543262Y-104874458D01* +X89535495Y-104886795D01* +X89533416Y-104889193D01* +X89532774Y-104891117D01* +X89530207Y-104895196D01* +X89482589Y-104990433D01* +X89473831Y-105013319D01* +X89473512Y-105017800D01* +X89471794Y-105021949D01* +X89469392Y-105046335D01* +X89469392Y-105159683D01* +X89453603Y-105191260D01* +X89427725Y-105204199D01* +X89401847Y-105191260D01* +X89386059Y-105159684D01* +X89386059Y-105075843D01* +X89420481Y-105006999D01* +X89429239Y-104984113D01* +X89432696Y-104935464D01* +X89417273Y-104889193D01* +X89385317Y-104852348D01* +X89341694Y-104830537D01* +X89293044Y-104827079D01* +X89246774Y-104842502D01* +X89209929Y-104874458D01* +X89196874Y-104895196D01* +X89149256Y-104990433D01* +X89140498Y-105013319D01* +X89140179Y-105017800D01* +X89138461Y-105021949D01* +X89136059Y-105046335D01* +X88677726Y-105046335D01* +X88677726Y-104189192D01* +X89136059Y-104189192D01* +X89136059Y-104379668D01* +X89138461Y-104404054D01* +X89140179Y-104408202D01* +X89140498Y-104412684D01* +X89149256Y-104435570D01* +X89196874Y-104530807D01* +X89199441Y-104534885D01* +X89200083Y-104536810D01* +X89202162Y-104539207D01* +X89209929Y-104551545D01* +X89221769Y-104561814D01* +X89232039Y-104573655D01* +X89244375Y-104581421D01* +X89246774Y-104583501D01* +X89248699Y-104584142D01* +X89252776Y-104586709D01* +X89348014Y-104634328D01* +X89370900Y-104643086D01* +X89375380Y-104643404D01* +X89379530Y-104645123D01* +X89403916Y-104647525D01* +X89784868Y-104647525D01* +X89809254Y-104645123D01* +X89813403Y-104643404D01* +X89817883Y-104643086D01* +X89840769Y-104634329D01* +X89936008Y-104586710D01* +X89940086Y-104584142D01* +X89942011Y-104583501D01* +X89944407Y-104581422D01* +X89956745Y-104573656D01* +X89967016Y-104561813D01* +X89978856Y-104551545D01* +X89986620Y-104539211D01* +X89988702Y-104536811D01* +X89989344Y-104534883D01* +X89991910Y-104530808D01* +X90039529Y-104435570D01* +X90048287Y-104412684D01* +X90048605Y-104408203D01* +X90050324Y-104404054D01* +X90052726Y-104379668D01* +X90052726Y-104189192D01* +X90050324Y-104164806D01* +X90048605Y-104160656D01* +X90048287Y-104156176D01* +X90039529Y-104133290D01* +X89991910Y-104038052D01* +X89978856Y-104017315D01* +X89942011Y-103985359D01* +X89895741Y-103969935D01* +X89847091Y-103973393D01* +X89803468Y-103995205D01* +X89771512Y-104032050D01* +X89756088Y-104078320D01* +X89759546Y-104126970D01* +X89768304Y-104149856D01* +X89802726Y-104218700D01* +X89802726Y-104350159D01* +X89786937Y-104381735D01* +X89755359Y-104397525D01* +X89696868Y-104397525D01* +X89621727Y-104021820D01* +X89614589Y-103998379D01* +X89607774Y-103988203D01* +X89603088Y-103976889D01* +X89594337Y-103968138D01* +X89587450Y-103957854D01* +X89577259Y-103951060D01* +X89568600Y-103942401D01* +X89557165Y-103937664D01* +X89546868Y-103930800D01* +X89534854Y-103928423D01* +X89523540Y-103923737D01* +X89499154Y-103921335D01* +X89403916Y-103921335D01* +X89379530Y-103923737D01* +X89375380Y-103925455D01* +X89370900Y-103925774D01* +X89348014Y-103934532D01* +X89252776Y-103982151D01* +X89248699Y-103984717D01* +X89246774Y-103985359D01* +X89244375Y-103987438D01* +X89232039Y-103995205D01* +X89221769Y-104007045D01* +X89209929Y-104017315D01* +X89202162Y-104029652D01* +X89200083Y-104032050D01* +X89199441Y-104033974D01* +X89196874Y-104038053D01* +X89149256Y-104133290D01* +X89140498Y-104156176D01* +X89140179Y-104160657D01* +X89138461Y-104164806D01* +X89136059Y-104189192D01* +X88677726Y-104189192D01* +X88677726Y-103332049D01* +X89136059Y-103332049D01* +X89136059Y-103474906D01* +X89138461Y-103499292D01* +X89140179Y-103503440D01* +X89140498Y-103507922D01* +X89149256Y-103530808D01* +X89157715Y-103547726D01* +X89157125Y-103548317D01* +X89138461Y-103593377D01* +X89138461Y-103642149D01* +X89157125Y-103687209D01* +X89191613Y-103721697D01* +X89236673Y-103740361D01* +X89261059Y-103742763D01* +X89927726Y-103742763D01* +X89952112Y-103740361D01* +X89997172Y-103721697D01* +X90031660Y-103687209D01* +X90050324Y-103642149D01* +X90050324Y-103593377D01* +X90031660Y-103548317D01* +X89997172Y-103513829D01* +X89952112Y-103495165D01* +X89927726Y-103492763D01* +X89409741Y-103492763D01* +X89386059Y-103445398D01* +X89386059Y-103361557D01* +X89401847Y-103329980D01* +X89433425Y-103314192D01* +X89927726Y-103314192D01* +X89952112Y-103311790D01* +X89997172Y-103293126D01* +X90031660Y-103258638D01* +X90050324Y-103213578D01* +X90050324Y-103164806D01* +X90031660Y-103119746D01* +X89997172Y-103085258D01* +X89952112Y-103066594D01* +X89927726Y-103064192D01* +X89403916Y-103064192D01* +X89379530Y-103066594D01* +X89375380Y-103068312D01* +X89370900Y-103068631D01* +X89348014Y-103077389D01* +X89252776Y-103125008D01* +X89248699Y-103127574D01* +X89246774Y-103128216D01* +X89244375Y-103130295D01* +X89232039Y-103138062D01* +X89221769Y-103149902D01* +X89209929Y-103160172D01* +X89202162Y-103172509D01* +X89200083Y-103174907D01* +X89199441Y-103176831D01* +X89196874Y-103180910D01* +X89149256Y-103276147D01* +X89140498Y-103299033D01* +X89140179Y-103303514D01* +X89138461Y-103307663D01* +X89136059Y-103332049D01* +X88677726Y-103332049D01* +X88677726Y-102688615D01* +X88805128Y-102688615D01* +X88805128Y-102737387D01* +X88823792Y-102782447D01* +X88858280Y-102816935D01* +X88903340Y-102835599D01* +X88927726Y-102838001D01* +X89927726Y-102838001D01* +X89952112Y-102835599D01* +X89997172Y-102816935D01* +X90031660Y-102782447D01* +X90050324Y-102737387D01* +X90050324Y-102688615D01* +X90031660Y-102643555D01* +X89997172Y-102609067D01* +X89952112Y-102590403D01* +X89927726Y-102588001D01* +X89794789Y-102588001D01* +X90002726Y-102432049D01* +X90020794Y-102415496D01* +X90045643Y-102373529D01* +X90052541Y-102325245D01* +X90040436Y-102277999D01* +X90011173Y-102238981D01* +X89969206Y-102214132D01* +X89920923Y-102207234D01* +X89873676Y-102219339D01* +X89852726Y-102232049D01* +X89558502Y-102452716D01* +X89349447Y-102243661D01* +X89330505Y-102228116D01* +X89285446Y-102209451D01* +X89236672Y-102209451D01* +X89191613Y-102228116D01* +X89157126Y-102262603D01* +X89138461Y-102307662D01* +X89138461Y-102356436D01* +X89157126Y-102401495D01* +X89172671Y-102420437D01* +X89340235Y-102588001D01* +X88927726Y-102588001D01* +X88903340Y-102590403D01* +X88858280Y-102609067D01* +X88823792Y-102643555D01* +X88805128Y-102688615D01* +X88677726Y-102688615D01* +X88677726Y-101617763D01* +X89136059Y-101617763D01* +X89136059Y-101808239D01* +X89138461Y-101832625D01* +X89140179Y-101836773D01* +X89140498Y-101841255D01* +X89149256Y-101864141D01* +X89196874Y-101959378D01* +X89199441Y-101963456D01* +X89200083Y-101965381D01* +X89202162Y-101967778D01* +X89209929Y-101980116D01* +X89221769Y-101990385D01* +X89232039Y-102002226D01* +X89244375Y-102009992D01* +X89246774Y-102012072D01* +X89248699Y-102012713D01* +X89252776Y-102015280D01* +X89348014Y-102062899D01* +X89370900Y-102071657D01* +X89375380Y-102071975D01* +X89379530Y-102073694D01* +X89403916Y-102076096D01* +X89784868Y-102076096D01* +X89809254Y-102073694D01* +X89813403Y-102071975D01* +X89817883Y-102071657D01* +X89840769Y-102062900D01* +X89936008Y-102015281D01* +X89940086Y-102012713D01* +X89942011Y-102012072D01* +X89944407Y-102009993D01* +X89956745Y-102002227D01* +X89967016Y-101990384D01* +X89978856Y-101980116D01* +X89986620Y-101967782D01* +X89988702Y-101965382D01* +X89989344Y-101963454D01* +X89991910Y-101959379D01* +X90039529Y-101864141D01* +X90048287Y-101841255D01* +X90048605Y-101836774D01* +X90050324Y-101832625D01* +X90052726Y-101808239D01* +X90052726Y-101617763D01* +X90050324Y-101593377D01* +X90048605Y-101589227D01* +X90048287Y-101584747D01* +X90039529Y-101561861D01* +X89991910Y-101466623D01* +X89978856Y-101445886D01* +X89942011Y-101413930D01* +X89895741Y-101398506D01* +X89847091Y-101401964D01* +X89803468Y-101423776D01* +X89771512Y-101460621D01* +X89756088Y-101506891D01* +X89759546Y-101555541D01* +X89768304Y-101578427D01* +X89802726Y-101647271D01* +X89802726Y-101778730D01* +X89786937Y-101810306D01* +X89755359Y-101826096D01* +X89696868Y-101826096D01* +X89621727Y-101450391D01* +X89614589Y-101426950D01* +X89607774Y-101416774D01* +X89603088Y-101405460D01* +X89594337Y-101396709D01* +X89587450Y-101386425D01* +X89577259Y-101379631D01* +X89568600Y-101370972D01* +X89557165Y-101366235D01* +X89546868Y-101359371D01* +X89534854Y-101356994D01* +X89523540Y-101352308D01* +X89499154Y-101349906D01* +X89403916Y-101349906D01* +X89379530Y-101352308D01* +X89375380Y-101354026D01* +X89370900Y-101354345D01* +X89348014Y-101363103D01* +X89252776Y-101410722D01* +X89248699Y-101413288D01* +X89246774Y-101413930D01* +X89244375Y-101416009D01* +X89232039Y-101423776D01* +X89221769Y-101435616D01* +X89209929Y-101445886D01* +X89202162Y-101458223D01* +X89200083Y-101460621D01* +X89199441Y-101462545D01* +X89196874Y-101466624D01* +X89149256Y-101561861D01* +X89140498Y-101584747D01* +X89140179Y-101589228D01* +X89138461Y-101593377D01* +X89136059Y-101617763D01* +X88677726Y-101617763D01* +X88677726Y-99951096D01* +X88802726Y-99951096D01* +X88802726Y-100189191D01* +X88805128Y-100213577D01* +X88806846Y-100217725D01* +X88807165Y-100222207D01* +X88815923Y-100245093D01* +X88863541Y-100340330D01* +X88870150Y-100350828D01* +X88871412Y-100353875D01* +X88874227Y-100357306D01* +X88876596Y-100361068D01* +X88879090Y-100363231D01* +X88886957Y-100372817D01* +X88934575Y-100420436D01* +X88953517Y-100435981D01* +X88998577Y-100454646D01* +X89047350Y-100454646D01* +X89092410Y-100435981D01* +X89126897Y-100401494D01* +X89145562Y-100356434D01* +X89145562Y-100307661D01* +X89126897Y-100262601D01* +X89111352Y-100243659D01* +X89078076Y-100210384D01* +X89052726Y-100159683D01* +X89052726Y-99980604D01* +X89078076Y-99929902D01* +X89097009Y-99910970D01* +X89147711Y-99885620D01* +X89193157Y-99885620D01* +X89288774Y-99917492D01* +X89839338Y-100468055D01* +X89858274Y-100483595D01* +X89858280Y-100483601D01* +X89890141Y-100496798D01* +X89903339Y-100502265D01* +X89903340Y-100502265D01* +X89952112Y-100502265D01* +X89952113Y-100502265D01* +X89970777Y-100494533D01* +X89997172Y-100483601D01* +X90031660Y-100449113D01* +X90048504Y-100408447D01* +X90050324Y-100404054D01* +X90050324Y-100404053D01* +X90052726Y-100379667D01* +X90052726Y-99760620D01* +X90050324Y-99736234D01* +X90031660Y-99691174D01* +X89997172Y-99656686D01* +X89952112Y-99638022D01* +X89903340Y-99638022D01* +X89858280Y-99656686D01* +X89823792Y-99691174D01* +X89805128Y-99736234D01* +X89802726Y-99760620D01* +X89802726Y-100077891D01* +X89444685Y-99719851D01* +X89425743Y-99704306D01* +X89421593Y-99702587D01* +X89418200Y-99699644D01* +X89395825Y-99689653D01* +X89252968Y-99642035D01* +X89240877Y-99639285D01* +X89237826Y-99638022D01* +X89233403Y-99637586D01* +X89229074Y-99636602D01* +X89225783Y-99636835D01* +X89213440Y-99635620D01* +X89118202Y-99635620D01* +X89093816Y-99638022D01* +X89089666Y-99639740D01* +X89085186Y-99640059D01* +X89062300Y-99648817D01* +X88967062Y-99696436D01* +X88956567Y-99703042D01* +X88953517Y-99704306D01* +X88950082Y-99707124D01* +X88946325Y-99709490D01* +X88944163Y-99711981D01* +X88934575Y-99719851D01* +X88886957Y-99767470D01* +X88879090Y-99777055D01* +X88876596Y-99779219D01* +X88874227Y-99782980D01* +X88871412Y-99786412D01* +X88870150Y-99789458D01* +X88863541Y-99799957D01* +X88815923Y-99895194D01* +X88807165Y-99918080D01* +X88806846Y-99922561D01* +X88805128Y-99926710D01* +X88802726Y-99951096D01* +X88677726Y-99951096D01* +X88677726Y-99046334D01* +X88802726Y-99046334D01* +X88802726Y-99141572D01* +X88805128Y-99165958D01* +X88806846Y-99170106D01* +X88807165Y-99174588D01* +X88815923Y-99197474D01* +X88863541Y-99292711D01* +X88870150Y-99303209D01* +X88871412Y-99306256D01* +X88874227Y-99309687D01* +X88876596Y-99313449D01* +X88879090Y-99315612D01* +X88886957Y-99325198D01* +X88934575Y-99372817D01* +X88944163Y-99380686D01* +X88946325Y-99383178D01* +X88950082Y-99385543D01* +X88953517Y-99388362D01* +X88956567Y-99389625D01* +X88967062Y-99396232D01* +X89062300Y-99443851D01* +X89064085Y-99444534D01* +X89064810Y-99445071D01* +X89075039Y-99448726D01* +X89085186Y-99452609D01* +X89086085Y-99452672D01* +X89087885Y-99453316D01* +X89278361Y-99500935D01* +X89282590Y-99501560D01* +X89284292Y-99502265D01* +X89293471Y-99503169D01* +X89302601Y-99504519D01* +X89304423Y-99504247D01* +X89308678Y-99504667D01* +X89546773Y-99504667D01* +X89551027Y-99504247D01* +X89552849Y-99504519D01* +X89561977Y-99503169D01* +X89571159Y-99502265D01* +X89572860Y-99501560D01* +X89577090Y-99500935D01* +X89767566Y-99453316D01* +X89769365Y-99452672D01* +X89770265Y-99452609D01* +X89780411Y-99448726D01* +X89790641Y-99445071D01* +X89791365Y-99444534D01* +X89793151Y-99443851D01* +X89888388Y-99396233D01* +X89898884Y-99389625D01* +X89901932Y-99388363D01* +X89905365Y-99385545D01* +X89909126Y-99383178D01* +X89911289Y-99380683D01* +X89920874Y-99372818D01* +X89968494Y-99325199D01* +X89976363Y-99315610D01* +X89978856Y-99313449D01* +X89981219Y-99309694D01* +X89984040Y-99306258D01* +X89985304Y-99303204D01* +X89991910Y-99292712D01* +X90039529Y-99197474D01* +X90048287Y-99174588D01* +X90048605Y-99170107D01* +X90050324Y-99165958D01* +X90052726Y-99141572D01* +X90052726Y-99046334D01* +X90050324Y-99021948D01* +X90048605Y-99017798D01* +X90048287Y-99013318D01* +X90039529Y-98990432D01* +X89991910Y-98895194D01* +X89985304Y-98884701D01* +X89984040Y-98881648D01* +X89981219Y-98878211D01* +X89978856Y-98874457D01* +X89976363Y-98872295D01* +X89968494Y-98862707D01* +X89920874Y-98815088D01* +X89911289Y-98807222D01* +X89909126Y-98804728D01* +X89905365Y-98802360D01* +X89901932Y-98799543D01* +X89898884Y-98798280D01* +X89888388Y-98791673D01* +X89793151Y-98744055D01* +X89791365Y-98743371D01* +X89790641Y-98742835D01* +X89780411Y-98739179D01* +X89770265Y-98735297D01* +X89769365Y-98735233D01* +X89767566Y-98734590D01* +X89577090Y-98686971D01* +X89572860Y-98686345D01* +X89571159Y-98685641D01* +X89561977Y-98684736D01* +X89552849Y-98683387D01* +X89551027Y-98683658D01* +X89546773Y-98683239D01* +X89308678Y-98683239D01* +X89304423Y-98683658D01* +X89302601Y-98683387D01* +X89293471Y-98684736D01* +X89284292Y-98685641D01* +X89282590Y-98686345D01* +X89278361Y-98686971D01* +X89087885Y-98734590D01* +X89086085Y-98735233D01* +X89085186Y-98735297D01* +X89075039Y-98739179D01* +X89064810Y-98742835D01* +X89064085Y-98743371D01* +X89062300Y-98744055D01* +X88967062Y-98791674D01* +X88956567Y-98798280D01* +X88953517Y-98799544D01* +X88950082Y-98802362D01* +X88946325Y-98804728D01* +X88944163Y-98807219D01* +X88934575Y-98815089D01* +X88886957Y-98862708D01* +X88879090Y-98872293D01* +X88876596Y-98874457D01* +X88874227Y-98878218D01* +X88871412Y-98881650D01* +X88870150Y-98884696D01* +X88863541Y-98895195D01* +X88815923Y-98990432D01* +X88807165Y-99013318D01* +X88806846Y-99017799D01* +X88805128Y-99021948D01* +X88802726Y-99046334D01* +X88677726Y-99046334D01* +X88677726Y-98046334D01* +X88802726Y-98046334D01* +X88802726Y-98284429D01* +X88805128Y-98308815D01* +X88806846Y-98312963D01* +X88807165Y-98317445D01* +X88815923Y-98340331D01* +X88863541Y-98435568D01* +X88870150Y-98446066D01* +X88871412Y-98449113D01* +X88874227Y-98452544D01* +X88876596Y-98456306D01* +X88879090Y-98458469D01* +X88886957Y-98468055D01* +X88934575Y-98515674D01* +X88953517Y-98531219D01* +X88998577Y-98549884D01* +X89047350Y-98549884D01* +X89092410Y-98531219D01* +X89126897Y-98496732D01* +X89145562Y-98451672D01* +X89145562Y-98402899D01* +X89126897Y-98357839D01* +X89111352Y-98338897D01* +X89078076Y-98305622D01* +X89052726Y-98254921D01* +X89052726Y-98075842D01* +X89078076Y-98025140D01* +X89097009Y-98006208D01* +X89147711Y-97980858D01* +X89193157Y-97980858D01* +X89288774Y-98012730D01* +X89839338Y-98563293D01* +X89858274Y-98578833D01* +X89858280Y-98578839D01* +X89890141Y-98592036D01* +X89903339Y-98597503D01* +X89903340Y-98597503D01* +X89952112Y-98597503D01* +X89952113Y-98597503D01* +X89970777Y-98589771D01* +X89997172Y-98578839D01* +X90031660Y-98544351D01* +X90048504Y-98503685D01* +X90050324Y-98499292D01* +X90050324Y-98499291D01* +X90052726Y-98474905D01* +X90052726Y-97855858D01* +X90050324Y-97831472D01* +X90031660Y-97786412D01* +X89997172Y-97751924D01* +X89952112Y-97733260D01* +X89903340Y-97733260D01* +X89858280Y-97751924D01* +X89823792Y-97786412D01* +X89805128Y-97831472D01* +X89802726Y-97855858D01* +X89802726Y-98173129D01* +X89444685Y-97815089D01* +X89425743Y-97799544D01* +X89421593Y-97797825D01* +X89418200Y-97794882D01* +X89395825Y-97784891D01* +X89252968Y-97737273D01* +X89240877Y-97734523D01* +X89237826Y-97733260D01* +X89233403Y-97732824D01* +X89229074Y-97731840D01* +X89225783Y-97732073D01* +X89213440Y-97730858D01* +X89118202Y-97730858D01* +X89093816Y-97733260D01* +X89089666Y-97734978D01* +X89085186Y-97735297D01* +X89062300Y-97744055D01* +X88967062Y-97791674D01* +X88956567Y-97798280D01* +X88953517Y-97799544D01* +X88950082Y-97802362D01* +X88946325Y-97804728D01* +X88944163Y-97807219D01* +X88934575Y-97815089D01* +X88886957Y-97862708D01* +X88879090Y-97872293D01* +X88876596Y-97874457D01* +X88874227Y-97878218D01* +X88871412Y-97881650D01* +X88870150Y-97884696D01* +X88863541Y-97895195D01* +X88815923Y-97990432D01* +X88807165Y-98013318D01* +X88806846Y-98017799D01* +X88805128Y-98021948D01* +X88802726Y-98046334D01* +X88677726Y-98046334D01* +X88677726Y-96951096D01* +X88802726Y-96951096D01* +X88802726Y-97427286D01* +X88803614Y-97436306D01* +X88803310Y-97439352D01* +X88804207Y-97442326D01* +X88805128Y-97451672D01* +X88812120Y-97468553D01* +X88817398Y-97486046D01* +X88821383Y-97490917D01* +X88823792Y-97496732D01* +X88836712Y-97509652D01* +X88848283Y-97523794D01* +X88853829Y-97526769D01* +X88858280Y-97531220D01* +X88875162Y-97538212D01* +X88891262Y-97546849D01* +X88900469Y-97548695D01* +X88903340Y-97549884D01* +X88906400Y-97549884D01* +X88915288Y-97551666D01* +X89391478Y-97599285D01* +X89415982Y-97599321D01* +X89422008Y-97597503D01* +X89428302Y-97597503D01* +X89445180Y-97590511D01* +X89462676Y-97585233D01* +X89467549Y-97581245D01* +X89473362Y-97578838D01* +X89486277Y-97565922D01* +X89500424Y-97554348D01* +X89503400Y-97548799D01* +X89507849Y-97544351D01* +X89514839Y-97527473D01* +X89523479Y-97511369D01* +X89524105Y-97505105D01* +X89526514Y-97499291D01* +X89526514Y-97481019D01* +X89528332Y-97462839D01* +X89526514Y-97456813D01* +X89526514Y-97450518D01* +X89519521Y-97433637D01* +X89514244Y-97416145D01* +X89510257Y-97411272D01* +X89507849Y-97405458D01* +X89492304Y-97386516D01* +X89459028Y-97353241D01* +X89433678Y-97302540D01* +X89433678Y-97123461D01* +X89459028Y-97072759D01* +X89477961Y-97053827D01* +X89528663Y-97028477D01* +X89707741Y-97028477D01* +X89758443Y-97053828D01* +X89777375Y-97072760D01* +X89802726Y-97123461D01* +X89802726Y-97302539D01* +X89777375Y-97353240D01* +X89744100Y-97386516D01* +X89728554Y-97405458D01* +X89709889Y-97450517D01* +X89709889Y-97499290D01* +X89728553Y-97544350D01* +X89763040Y-97578838D01* +X89808099Y-97597503D01* +X89856872Y-97597503D01* +X89901932Y-97578839D01* +X89920874Y-97563294D01* +X89968494Y-97515675D01* +X89976363Y-97506086D01* +X89978856Y-97503925D01* +X89981219Y-97500170D01* +X89984040Y-97496734D01* +X89985304Y-97493680D01* +X89991910Y-97483188D01* +X90039529Y-97387950D01* +X90048287Y-97365064D01* +X90048605Y-97360583D01* +X90050324Y-97356434D01* +X90052726Y-97332048D01* +X90052726Y-97093953D01* +X90050324Y-97069567D01* +X90048605Y-97065417D01* +X90048287Y-97060937D01* +X90039529Y-97038051D01* +X89991910Y-96942813D01* +X89985304Y-96932320D01* +X89984040Y-96929267D01* +X89981219Y-96925830D01* +X89978856Y-96922076D01* +X89976363Y-96919914D01* +X89968494Y-96910326D01* +X89920874Y-96862707D01* +X89911289Y-96854841D01* +X89909126Y-96852347D01* +X89905365Y-96849979D01* +X89901932Y-96847162D01* +X89898884Y-96845899D01* +X89888388Y-96839292D01* +X89793151Y-96791674D01* +X89770265Y-96782916D01* +X89765783Y-96782597D01* +X89761635Y-96780879D01* +X89737249Y-96778477D01* +X89499154Y-96778477D01* +X89474768Y-96780879D01* +X89470618Y-96782597D01* +X89466138Y-96782916D01* +X89443252Y-96791674D01* +X89348014Y-96839293D01* +X89337519Y-96845899D01* +X89334469Y-96847163D01* +X89331034Y-96849981D01* +X89327277Y-96852347D01* +X89325115Y-96854838D01* +X89315527Y-96862708D01* +X89267909Y-96910327D01* +X89260042Y-96919912D01* +X89257548Y-96922076D01* +X89255179Y-96925837D01* +X89252364Y-96929269D01* +X89251102Y-96932315D01* +X89244493Y-96942814D01* +X89196875Y-97038051D01* +X89188117Y-97060937D01* +X89187798Y-97065418D01* +X89186080Y-97069567D01* +X89183678Y-97093953D01* +X89183678Y-97327257D01* +X89052726Y-97314162D01* +X89052726Y-96951096D01* +X89050324Y-96926710D01* +X89031660Y-96881650D01* +X88997172Y-96847162D01* +X88952112Y-96828498D01* +X88903340Y-96828498D01* +X88858280Y-96847162D01* +X88823792Y-96881650D01* +X88805128Y-96926710D01* +X88802726Y-96951096D01* +X88677726Y-96951096D01* +X88677726Y-96653477D01* +X90177726Y-96653477D01* +X90177726Y-105582049D01* +G37* +D11* +G36* +X71263864Y-66284399D02* +G01* +X71290309Y-66314622D01* +X71321318Y-66397314D01* +X71276435Y-66756381D01* +X71216114Y-66852893D01* +X71168063Y-66895606D01* +X71066214Y-66943535D01* +X70851530Y-66943535D01* +X70841743Y-66938315D01* +X70925842Y-66265520D01* +X70972561Y-66243535D01* +X71187244Y-66243535D01* +X71263864Y-66284399D01* +G37* +G36* +X69827217Y-66921550D02* +G01* +X69780500Y-66943535D01* +X69494387Y-66943535D01* +X69443521Y-66916407D01* +X69422812Y-66861183D01* +X69431981Y-66787831D01* +X69480336Y-66710463D01* +X69561846Y-66672107D01* +X69858398Y-66672107D01* +X69827217Y-66921550D01* +G37* +G36* +X75952396Y-66270664D02* +G01* +X75972550Y-66324409D01* +X75551058Y-66406651D01* +X75556982Y-66359259D01* +X75605336Y-66281893D01* +X75686847Y-66243535D01* +X75901530Y-66243535D01* +X75952396Y-66270664D01* +G37* +G36* +X76442809Y-67909814D02* +G01* +X67676323Y-67909814D01* +X67676323Y-67604325D01* +X70459061Y-67604325D01* +X70474580Y-67660758D01* +X70510511Y-67706955D01* +X70561387Y-67735887D01* +X70619463Y-67743147D01* +X70675896Y-67727628D01* +X70722093Y-67691697D01* +X70751025Y-67640821D01* +X70757515Y-67612140D01* +X70803717Y-67242519D01* +X70814030Y-67243535D01* +X71099744Y-67243535D01* +X71129008Y-67240653D01* +X71132322Y-67239280D01* +X71135907Y-67239111D01* +X71163613Y-67229258D01* +X71315399Y-67157830D01* +X71324051Y-67152666D01* +X71327398Y-67151506D01* +X71333823Y-67146835D01* +X71340651Y-67142762D01* +X71343036Y-67140140D01* +X71351185Y-67134218D01* +X71431542Y-67062789D01* +X71438272Y-67055506D01* +X71441133Y-67053466D01* +X71446043Y-67047096D01* +X71451499Y-67041193D01* +X71453030Y-67038033D01* +X71453867Y-67036947D01* +X71816552Y-67036947D01* +X71833593Y-67092937D01* +X71870763Y-67138146D01* +X71895228Y-67154460D01* +X72029156Y-67225888D01* +X72056333Y-67237116D01* +X72063668Y-67237831D01* +X72070480Y-67240653D01* +X72099744Y-67243535D01* +X72385459Y-67243535D01* +X72414723Y-67240653D01* +X72418037Y-67239280D01* +X72421623Y-67239111D01* +X72449328Y-67229258D01* +X72601114Y-67157830D01* +X72626365Y-67142762D01* +X72635473Y-67132751D01* +X72646490Y-67124895D01* +X72664444Y-67101607D01* +X72753730Y-66958749D01* +X72766796Y-66932405D01* +X72767318Y-66929285D01* +X72768882Y-66926536D01* +X72775372Y-66897855D01* +X72776349Y-66890039D01* +X73119776Y-66890039D01* +X73121594Y-66896652D01* +X73121362Y-66903504D01* +X73128938Y-66931917D01* +X73182509Y-67074775D01* +X73189593Y-67089185D01* +X73190736Y-67092938D01* +X73192483Y-67095063D01* +X73195483Y-67101164D01* +X73212280Y-67119141D01* +X73227906Y-67138146D01* +X73233560Y-67141916D01* +X73235441Y-67143929D01* +X73239013Y-67145553D01* +X73252371Y-67154460D01* +X73386301Y-67225888D01* +X73413478Y-67237117D01* +X73420815Y-67237832D01* +X73427624Y-67240653D01* +X73456888Y-67243535D01* +X73671173Y-67243535D01* +X73700437Y-67240653D01* +X73703751Y-67239280D01* +X73707336Y-67239111D01* +X73735042Y-67229258D01* +X73785994Y-67205280D01* +X73787297Y-67206955D01* +X73838173Y-67235887D01* +X73896249Y-67243147D01* +X73952682Y-67227628D01* +X73998879Y-67191697D01* +X74027811Y-67140821D01* +X74034301Y-67112140D01* +X74062064Y-66890039D01* +X74476919Y-66890039D01* +X74478737Y-66896652D01* +X74478505Y-66903504D01* +X74486081Y-66931917D01* +X74539652Y-67074775D01* +X74546736Y-67089185D01* +X74547879Y-67092938D01* +X74549626Y-67095063D01* +X74552626Y-67101164D01* +X74569423Y-67119141D01* +X74585049Y-67138146D01* +X74590703Y-67141916D01* +X74592584Y-67143929D01* +X74596156Y-67145553D01* +X74609514Y-67154460D01* +X74743444Y-67225888D01* +X74770621Y-67237117D01* +X74828872Y-67242799D01* +X74884862Y-67225758D01* +X74930070Y-67188588D01* +X74957613Y-67136945D01* +X74963295Y-67078694D01* +X74946254Y-67022704D01* +X74909084Y-66977496D01* +X74884619Y-66961182D01* +X74800665Y-66916407D01* +X74790777Y-66890039D01* +X75191204Y-66890039D01* +X75193022Y-66896652D01* +X75192790Y-66903504D01* +X75200366Y-66931917D01* +X75253937Y-67074775D01* +X75261021Y-67089185D01* +X75262164Y-67092938D01* +X75263911Y-67095063D01* +X75266911Y-67101164D01* +X75283708Y-67119141D01* +X75299334Y-67138146D01* +X75304988Y-67141916D01* +X75306869Y-67143929D01* +X75310441Y-67145553D01* +X75323799Y-67154460D01* +X75457729Y-67225888D01* +X75484906Y-67237117D01* +X75492243Y-67237832D01* +X75499052Y-67240653D01* +X75528316Y-67243535D01* +X75814030Y-67243535D01* +X75843294Y-67240653D01* +X75846608Y-67239280D01* +X75850193Y-67239111D01* +X75877899Y-67229258D01* +X76029685Y-67157830D01* +X76054937Y-67142762D01* +X76094325Y-67099472D01* +X76114149Y-67044406D01* +X76111392Y-66985944D01* +X76086471Y-66932986D01* +X76043182Y-66893598D01* +X75988115Y-66873774D01* +X75929653Y-66876531D01* +X75901947Y-66886384D01* +X75780500Y-66943535D01* +X75565816Y-66943535D01* +X75514950Y-66916407D01* +X75494241Y-66861183D01* +X75511895Y-66719951D01* +X76137399Y-66597902D01* +X76165570Y-66589469D01* +X76170360Y-66586293D01* +X76175896Y-66584771D01* +X76194593Y-66570228D01* +X76214352Y-66557130D01* +X76217561Y-66552364D01* +X76222093Y-66548840D01* +X76233806Y-66528242D01* +X76247044Y-66508586D01* +X76248184Y-66502958D01* +X76251025Y-66497964D01* +X76257515Y-66469283D01* +X76275372Y-66326426D01* +X76276142Y-66297030D01* +X76274323Y-66290416D01* +X76274556Y-66283565D01* +X76266979Y-66255153D01* +X76213408Y-66112296D01* +X76206323Y-66097885D01* +X76205182Y-66094134D01* +X76203434Y-66092008D01* +X76200435Y-66085907D01* +X76183634Y-66067926D01* +X76168012Y-66048925D01* +X76162357Y-66045154D01* +X76160477Y-66043142D01* +X76156904Y-66041518D01* +X76143547Y-66032611D01* +X76009618Y-65961182D01* +X75982441Y-65949954D01* +X75975105Y-65949238D01* +X75968294Y-65946417D01* +X75939030Y-65943535D01* +X75653316Y-65943535D01* +X75624052Y-65946417D01* +X75620737Y-65947789D01* +X75617152Y-65947959D01* +X75589446Y-65957812D01* +X75437660Y-66029241D01* +X75412409Y-66044310D01* +X75403300Y-66054320D01* +X75392284Y-66062177D01* +X75374330Y-66085465D01* +X75285045Y-66228322D01* +X75271979Y-66254665D01* +X75271456Y-66257785D01* +X75269893Y-66260535D01* +X75263403Y-66289216D01* +X75191974Y-66860644D01* +X75191204Y-66890039D01* +X74790777Y-66890039D01* +X74779956Y-66861183D01* +X74936087Y-65612140D01* +X74936857Y-65582744D01* +X74921338Y-65526312D01* +X74885407Y-65480114D01* +X74834531Y-65451182D01* +X74776455Y-65443923D01* +X74720022Y-65459441D01* +X74673825Y-65495373D01* +X74644893Y-65546249D01* +X74638403Y-65574929D01* +X74477689Y-66860644D01* +X74476919Y-66890039D01* +X74062064Y-66890039D01* +X74159301Y-66112140D01* +X74160071Y-66082745D01* +X74144552Y-66026312D01* +X74108621Y-65980115D01* +X74057745Y-65951183D01* +X73999669Y-65943924D01* +X73943236Y-65959442D01* +X73897039Y-65995373D01* +X73868107Y-66046249D01* +X73861617Y-66074930D01* +X73761475Y-66876065D01* +X73739492Y-66895606D01* +X73637643Y-66943535D01* +X73494388Y-66943535D01* +X73443522Y-66916407D01* +X73422813Y-66861183D01* +X73516444Y-66112140D01* +X73517214Y-66082744D01* +X73501695Y-66026312D01* +X73465764Y-65980114D01* +X73414888Y-65951182D01* +X73356812Y-65943923D01* +X73300379Y-65959441D01* +X73254182Y-65995373D01* +X73225250Y-66046249D01* +X73218760Y-66074929D01* +X73120546Y-66860644D01* +X73119776Y-66890039D01* +X72776349Y-66890039D01* +X72784301Y-66826427D01* +X72785071Y-66797032D01* +X72783252Y-66790418D01* +X72783485Y-66783565D01* +X72775908Y-66755152D01* +X72722336Y-66612295D01* +X72715252Y-66597886D01* +X72714110Y-66594134D01* +X72712362Y-66592008D01* +X72709362Y-66585906D01* +X72692561Y-66567926D01* +X72676940Y-66548926D01* +X72671284Y-66545154D01* +X72669404Y-66543142D01* +X72665831Y-66541518D01* +X72652475Y-66532611D01* +X72518548Y-66461182D01* +X72491370Y-66449954D01* +X72484033Y-66449238D01* +X72477223Y-66446417D01* +X72447959Y-66443535D01* +X72271173Y-66443535D01* +X72220307Y-66416407D01* +X72199599Y-66361184D01* +X72199839Y-66359259D01* +X72248193Y-66281893D01* +X72329704Y-66243535D01* +X72472958Y-66243535D01* +X72573798Y-66297316D01* +X72600975Y-66308545D01* +X72659226Y-66314228D01* +X72715216Y-66297188D01* +X72760425Y-66260017D01* +X72787968Y-66208375D01* +X72793651Y-66150124D01* +X72776610Y-66094134D01* +X72739440Y-66048926D01* +X72714975Y-66032611D01* +X72581048Y-65961182D01* +X72553870Y-65949954D01* +X72546533Y-65949238D01* +X72539723Y-65946417D01* +X72510459Y-65943535D01* +X72296173Y-65943535D01* +X72266909Y-65946417D01* +X72263594Y-65947789D01* +X72260009Y-65947959D01* +X72232303Y-65957812D01* +X72080517Y-66029241D01* +X72055266Y-66044310D01* +X72046157Y-66054320D01* +X72035141Y-66062177D01* +X72017187Y-66085465D01* +X71927902Y-66228322D01* +X71914836Y-66254665D01* +X71914313Y-66257784D01* +X71912750Y-66260534D01* +X71906260Y-66289215D01* +X71897331Y-66360643D01* +X71896561Y-66390038D01* +X71898379Y-66396651D01* +X71898147Y-66403504D01* +X71905723Y-66431917D01* +X71959294Y-66574775D01* +X71966378Y-66589185D01* +X71967521Y-66592938D01* +X71969268Y-66595063D01* +X71972268Y-66601164D01* +X71989065Y-66619141D01* +X72004691Y-66638146D01* +X72010345Y-66641916D01* +X72012226Y-66643929D01* +X72015798Y-66645553D01* +X72029156Y-66654460D01* +X72163086Y-66725888D01* +X72190263Y-66737117D01* +X72197600Y-66737832D01* +X72204409Y-66740653D01* +X72233673Y-66743535D01* +X72410458Y-66743535D01* +X72461324Y-66770663D01* +X72482032Y-66825885D01* +X72481792Y-66827809D01* +X72433436Y-66905178D01* +X72351929Y-66943535D01* +X72137244Y-66943535D01* +X72036404Y-66889754D01* +X72009227Y-66878526D01* +X71950976Y-66872843D01* +X71894986Y-66889884D01* +X71849777Y-66927054D01* +X71822235Y-66978696D01* +X71816552Y-67036947D01* +X71453867Y-67036947D01* +X71459087Y-67030178D01* +X71548373Y-66887321D01* +X71561439Y-66860978D01* +X71561961Y-66857856D01* +X71563525Y-66855107D01* +X71570015Y-66826426D01* +X71623586Y-66397854D01* +X71624356Y-66368459D01* +X71622537Y-66361845D01* +X71622770Y-66354993D01* +X71615193Y-66326581D01* +X71561622Y-66183724D01* +X71552144Y-66164446D01* +X71551161Y-66161537D01* +X71549732Y-66159538D01* +X71548649Y-66157335D01* +X71546553Y-66155092D01* +X71534059Y-66137616D01* +X71471559Y-66066188D01* +X71455607Y-66051213D01* +X71453726Y-66048925D01* +X71451805Y-66047644D01* +X71450120Y-66046062D01* +X71447459Y-66044746D01* +X71429261Y-66032611D01* +X71295332Y-65961182D01* +X71268155Y-65949954D01* +X71260819Y-65949238D01* +X71254008Y-65946417D01* +X71224744Y-65943535D01* +X70939030Y-65943535D01* +X70909766Y-65946417D01* +X70906451Y-65947789D01* +X70902866Y-65947959D01* +X70875160Y-65957812D01* +X70864192Y-65962973D01* +X70843459Y-65951183D01* +X70785383Y-65943924D01* +X70728950Y-65959442D01* +X70682753Y-65995373D01* +X70653821Y-66046250D01* +X70647331Y-66074930D01* +X70459831Y-67574930D01* +X70459061Y-67604325D01* +X67676323Y-67604325D01* +X67676323Y-66818611D01* +X67842990Y-66818611D01* +X67844808Y-66825224D01* +X67844576Y-66832077D01* +X67852153Y-66860489D01* +X67905723Y-67003346D01* +X67915202Y-67022627D01* +X67916185Y-67025532D01* +X67917611Y-67027528D01* +X67918697Y-67029735D01* +X67920794Y-67031979D01* +X67933286Y-67049453D01* +X67995786Y-67120882D01* +X68011738Y-67135857D01* +X68013620Y-67138146D01* +X68015540Y-67139426D01* +X68017225Y-67141008D01* +X68019883Y-67142322D01* +X68038085Y-67154460D01* +X68172015Y-67225888D01* +X68199192Y-67237117D01* +X68206529Y-67237832D01* +X68213338Y-67240653D01* +X68242602Y-67243535D01* +X68528316Y-67243535D01* +X68557580Y-67240653D01* +X68560894Y-67239280D01* +X68564479Y-67239111D01* +X68592185Y-67229258D01* +X68743971Y-67157830D01* +X68769223Y-67142762D01* +X68808611Y-67099472D01* +X68828435Y-67044406D01* +X68825678Y-66985944D01* +X68800757Y-66932986D01* +X68757468Y-66893598D01* +X68747582Y-66890039D01* +X69119775Y-66890039D01* +X69121593Y-66896652D01* +X69121361Y-66903504D01* +X69128937Y-66931917D01* +X69182508Y-67074775D01* +X69189592Y-67089185D01* +X69190735Y-67092938D01* +X69192482Y-67095063D01* +X69195482Y-67101164D01* +X69212279Y-67119141D01* +X69227905Y-67138146D01* +X69233559Y-67141916D01* +X69235440Y-67143929D01* +X69239012Y-67145553D01* +X69252370Y-67154460D01* +X69386300Y-67225888D01* +X69413477Y-67237117D01* +X69420814Y-67237832D01* +X69427623Y-67240653D01* +X69456887Y-67243535D01* +X69814030Y-67243535D01* +X69843294Y-67240653D01* +X69846608Y-67239280D01* +X69850193Y-67239111D01* +X69877899Y-67229258D01* +X69888867Y-67224096D01* +X69909601Y-67235887D01* +X69967677Y-67243147D01* +X70024110Y-67227628D01* +X70070307Y-67191697D01* +X70099239Y-67140821D01* +X70105729Y-67112140D01* +X70203943Y-66326426D01* +X70204713Y-66297030D01* +X70202894Y-66290416D01* +X70203127Y-66283565D01* +X70195550Y-66255153D01* +X70141979Y-66112296D01* +X70134894Y-66097885D01* +X70133753Y-66094134D01* +X70132005Y-66092008D01* +X70129006Y-66085907D01* +X70112205Y-66067926D01* +X70096583Y-66048925D01* +X70090928Y-66045154D01* +X70089048Y-66043142D01* +X70085475Y-66041518D01* +X70072118Y-66032611D01* +X69938189Y-65961182D01* +X69911012Y-65949954D01* +X69903676Y-65949238D01* +X69896865Y-65946417D01* +X69867601Y-65943535D01* +X69581887Y-65943535D01* +X69552623Y-65946417D01* +X69549308Y-65947789D01* +X69545723Y-65947959D01* +X69518017Y-65957812D01* +X69366231Y-66029241D01* +X69340980Y-66044310D01* +X69301591Y-66087599D01* +X69281768Y-66142666D01* +X69284525Y-66201128D01* +X69309447Y-66254085D01* +X69352736Y-66293474D01* +X69407803Y-66313297D01* +X69466265Y-66310540D01* +X69493971Y-66300687D01* +X69615418Y-66243535D01* +X69830101Y-66243535D01* +X69880967Y-66270664D01* +X69901675Y-66325885D01* +X69898645Y-66350121D01* +X69851927Y-66372107D01* +X69528316Y-66372107D01* +X69499052Y-66374989D01* +X69495737Y-66376361D01* +X69492153Y-66376531D01* +X69464447Y-66386384D01* +X69312661Y-66457812D01* +X69287409Y-66472880D01* +X69278300Y-66482890D01* +X69267284Y-66490747D01* +X69249330Y-66514035D01* +X69160044Y-66656892D01* +X69146978Y-66683235D01* +X69146455Y-66686356D01* +X69144892Y-66689106D01* +X69138402Y-66717787D01* +X69120545Y-66860644D01* +X69119775Y-66890039D01* +X68747582Y-66890039D01* +X68702401Y-66873774D01* +X68643939Y-66876531D01* +X68616233Y-66886384D01* +X68494786Y-66943535D01* +X68280102Y-66943535D01* +X68203483Y-66902672D01* +X68177035Y-66872446D01* +X68146027Y-66789757D01* +X68190910Y-66430688D01* +X68251230Y-66334177D01* +X68299281Y-66291465D01* +X68401133Y-66243535D01* +X68615815Y-66243535D01* +X68716655Y-66297316D01* +X68743832Y-66308545D01* +X68802083Y-66314228D01* +X68858073Y-66297188D01* +X68903282Y-66260017D01* +X68930825Y-66208375D01* +X68936508Y-66150124D01* +X68919467Y-66094134D01* +X68882297Y-66048926D01* +X68857832Y-66032611D01* +X68723905Y-65961182D01* +X68696727Y-65949954D01* +X68689390Y-65949238D01* +X68682580Y-65946417D01* +X68653316Y-65943535D01* +X68367602Y-65943535D01* +X68338338Y-65946417D01* +X68335023Y-65947789D01* +X68331438Y-65947959D01* +X68303732Y-65957812D01* +X68151946Y-66029241D01* +X68143296Y-66034402D01* +X68139949Y-66035564D01* +X68133515Y-66040239D01* +X68126695Y-66044310D01* +X68124312Y-66046928D01* +X68116162Y-66052852D01* +X68035805Y-66124280D01* +X68029073Y-66131564D01* +X68026213Y-66133604D01* +X68021305Y-66139969D01* +X68015847Y-66145876D01* +X68014313Y-66149038D01* +X68008259Y-66156892D01* +X67918973Y-66299749D01* +X67905907Y-66326092D01* +X67905384Y-66329215D01* +X67903821Y-66331964D01* +X67897331Y-66360644D01* +X67843760Y-66789216D01* +X67842990Y-66818611D01* +X67676323Y-66818611D01* +X67676323Y-65277256D01* +X76442809Y-65277256D01* +X76442809Y-67909814D01* +G37* +G36* +X73775680Y-151863084D02* +G01* +X73802125Y-151893307D01* +X73833134Y-151975999D01* +X73815037Y-152120780D01* +X73754716Y-152217292D01* +X73706665Y-152260005D01* +X73604816Y-152307934D01* +X73236835Y-152307934D01* +X73297550Y-151822220D01* +X73699060Y-151822220D01* +X73775680Y-151863084D01* +G37* +G36* +X74302839Y-153488887D02* +G01* +X69875738Y-153488887D01* +X69875738Y-153160145D01* +X70042405Y-153160145D01* +X70049165Y-153218279D01* +X70077657Y-153269403D01* +X70123546Y-153305732D01* +X70179843Y-153321733D01* +X70237977Y-153314973D01* +X70289101Y-153286481D01* +X70309525Y-153265325D01* +X70762101Y-152693650D01* +X71060024Y-153243662D01* +X71076496Y-153268021D01* +X71121944Y-153304899D01* +X71178043Y-153321577D01* +X71236256Y-153315518D01* +X71287719Y-153287642D01* +X71324597Y-153242194D01* +X71341275Y-153186095D01* +X71340954Y-153183010D01* +X71613734Y-153183010D01* +X71616228Y-153192079D01* +X71616228Y-153201484D01* +X71623922Y-153220060D01* +X71629253Y-153239443D01* +X71635026Y-153246865D01* +X71638626Y-153255556D01* +X71652843Y-153269773D01* +X71665184Y-153285640D01* +X71673358Y-153290288D01* +X71680010Y-153296940D01* +X71698584Y-153304633D01* +X71716060Y-153314572D01* +X71725392Y-153315738D01* +X71734082Y-153319338D01* +X71763346Y-153322220D01* +X72477632Y-153322220D01* +X72506896Y-153319338D01* +X72560968Y-153296940D01* +X72602352Y-153255556D01* +X72624750Y-153201484D01* +X72624750Y-153183010D01* +X72828020Y-153183010D01* +X72843539Y-153239443D01* +X72879470Y-153285640D01* +X72930346Y-153314572D01* +X72988422Y-153321832D01* +X73044855Y-153306313D01* +X73091052Y-153270382D01* +X73119984Y-153219506D01* +X73126474Y-153190825D01* +X73199335Y-152607934D01* +X73337281Y-152607934D01* +X73704739Y-153246991D01* +X73721825Y-153270924D01* +X73768195Y-153306634D01* +X73824700Y-153321881D01* +X73882740Y-153314345D01* +X73933478Y-153285171D01* +X73969189Y-153238800D01* +X73984436Y-153182295D01* +X73976900Y-153124255D01* +X73964811Y-153097450D01* +X73679728Y-152601653D01* +X73702215Y-152593657D01* +X73854001Y-152522229D01* +X73862653Y-152517065D01* +X73866000Y-152515905D01* +X73872425Y-152511234D01* +X73879253Y-152507161D01* +X73881638Y-152504539D01* +X73889787Y-152498617D01* +X73970144Y-152427188D01* +X73976874Y-152419905D01* +X73979735Y-152417865D01* +X73984645Y-152411495D01* +X73990101Y-152405592D01* +X73991632Y-152402432D01* +X73997689Y-152394577D01* +X74086975Y-152251720D01* +X74100041Y-152225377D01* +X74100563Y-152222253D01* +X74102127Y-152219505D01* +X74108617Y-152190825D01* +X74135402Y-151976538D01* +X74136172Y-151947143D01* +X74134353Y-151940529D01* +X74134586Y-151933678D01* +X74127009Y-151905266D01* +X74073438Y-151762409D01* +X74063960Y-151743131D01* +X74062977Y-151740222D01* +X74061548Y-151738223D01* +X74060465Y-151736020D01* +X74058369Y-151733777D01* +X74045875Y-151716301D01* +X73983375Y-151644873D01* +X73967423Y-151629898D01* +X73965542Y-151627610D01* +X73963621Y-151626329D01* +X73961936Y-151624747D01* +X73959275Y-151623431D01* +X73941077Y-151611296D01* +X73807148Y-151539867D01* +X73779971Y-151528639D01* +X73772635Y-151527923D01* +X73765824Y-151525102D01* +X73736560Y-151522220D01* +X73165132Y-151522220D01* +X73157356Y-151522985D01* +X73154342Y-151522609D01* +X73150525Y-151523658D01* +X73135868Y-151525102D01* +X73117289Y-151532797D01* +X73097909Y-151538127D01* +X73090486Y-151543900D01* +X73081796Y-151547500D01* +X73067579Y-151561717D01* +X73051712Y-151574058D01* +X73047063Y-151582232D01* +X73040412Y-151588884D01* +X73032717Y-151607460D01* +X73022780Y-151624935D01* +X73019530Y-151639295D01* +X73018014Y-151642956D01* +X73018014Y-151645996D01* +X73016290Y-151653615D01* +X72828790Y-153153615D01* +X72828020Y-153183010D01* +X72624750Y-153183010D01* +X72624750Y-153142956D01* +X72602352Y-153088884D01* +X72560968Y-153047500D01* +X72506896Y-153025102D01* +X72477632Y-153022220D01* +X71933264Y-153022220D01* +X72099688Y-151690826D01* +X72100458Y-151661430D01* +X72084939Y-151604997D01* +X72049008Y-151558800D01* +X71998132Y-151529868D01* +X71940056Y-151522609D01* +X71883623Y-151538127D01* +X71837426Y-151574058D01* +X71808494Y-151624935D01* +X71802004Y-151653615D01* +X71614504Y-153153615D01* +X71613734Y-153183010D01* +X71340954Y-153183010D01* +X71335216Y-153127882D01* +X71323812Y-153100778D01* +X70964678Y-152437762D01* +X71497025Y-151765326D01* +X71512929Y-151740593D01* +X71528931Y-151684295D01* +X71522171Y-151626161D01* +X71493679Y-151575037D01* +X71447790Y-151538709D01* +X71391493Y-151522707D01* +X71333358Y-151529467D01* +X71282235Y-151557959D01* +X71261811Y-151579115D01* +X70809235Y-152150789D01* +X70511312Y-151600778D01* +X70494840Y-151576419D01* +X70449392Y-151539541D01* +X70393293Y-151522863D01* +X70335080Y-151528922D01* +X70283617Y-151556798D01* +X70246739Y-151602246D01* +X70230061Y-151658345D01* +X70236120Y-151716558D01* +X70247524Y-151743662D01* +X70606657Y-152406677D01* +X70074311Y-153079115D01* +X70058406Y-153103848D01* +X70042405Y-153160145D01* +X69875738Y-153160145D01* +X69875738Y-151355553D01* +X74302839Y-151355553D01* +X74302839Y-153488887D01* +G37* +G36* +X87867299Y-103475002D02* +G01* +X87867299Y-103761326D01* +X87834067Y-103827789D01* +X87767604Y-103861021D01* +X87695566Y-103861021D01* +X87629101Y-103827789D01* +X87595871Y-103761326D01* +X87595871Y-103446736D01* +X87853166Y-103446736D01* +X87867299Y-103475002D01* +G37* +G36* +X87867299Y-101332145D02* +G01* +X87867299Y-101618469D01* +X87834067Y-101684932D01* +X87767604Y-101718164D01* +X87695566Y-101718164D01* +X87629101Y-101684932D01* +X87595871Y-101618469D01* +X87595871Y-101303879D01* +X87853166Y-101303879D01* +X87867299Y-101332145D01* +G37* +G36* +X88333966Y-105324806D02* +G01* +X86200632Y-105324806D01* +X86200632Y-104767472D01* +X86370181Y-104767472D01* +X86370181Y-104826000D01* +X86392579Y-104880072D01* +X86433963Y-104921456D01* +X86488035Y-104943854D01* +X86517299Y-104946736D01* +X86867299Y-104946736D01* +X86867299Y-105011021D01* +X86870181Y-105040285D01* +X86892579Y-105094357D01* +X86933963Y-105135741D01* +X86988035Y-105158139D01* +X87046563Y-105158139D01* +X87100635Y-105135741D01* +X87142019Y-105094357D01* +X87164417Y-105040285D01* +X87167299Y-105011021D01* +X87167299Y-104946736D01* +X87803013Y-104946736D01* +X87832277Y-104943854D01* +X87837254Y-104941792D01* +X87842632Y-104941410D01* +X87870095Y-104930900D01* +X88012953Y-104859471D01* +X88017847Y-104856390D01* +X88020155Y-104855621D01* +X88023028Y-104853128D01* +X88037839Y-104843806D01* +X88050163Y-104829594D01* +X88064370Y-104817274D01* +X88073691Y-104802466D01* +X88076185Y-104799591D01* +X88076954Y-104797282D01* +X88080035Y-104792389D01* +X88151463Y-104649531D01* +X88161973Y-104622068D01* +X88162354Y-104616692D01* +X88164417Y-104611714D01* +X88167299Y-104582450D01* +X88167299Y-104439593D01* +X88164417Y-104410329D01* +X88142019Y-104356257D01* +X88100635Y-104314873D01* +X88046563Y-104292475D01* +X87988035Y-104292475D01* +X87933963Y-104314873D01* +X87892579Y-104356257D01* +X87870181Y-104410329D01* +X87867299Y-104439593D01* +X87867299Y-104547040D01* +X87834067Y-104613503D01* +X87767603Y-104646736D01* +X87167299Y-104646736D01* +X87167299Y-104439593D01* +X87164417Y-104410329D01* +X87142019Y-104356257D01* +X87100635Y-104314873D01* +X87046563Y-104292475D01* +X86988035Y-104292475D01* +X86933963Y-104314873D01* +X86892579Y-104356257D01* +X86870181Y-104410329D01* +X86867299Y-104439593D01* +X86867299Y-104646736D01* +X86517299Y-104646736D01* +X86488035Y-104649618D01* +X86433963Y-104672016D01* +X86392579Y-104713400D01* +X86370181Y-104767472D01* +X86200632Y-104767472D01* +X86200632Y-103511021D01* +X86867299Y-103511021D01* +X86867299Y-103796736D01* +X86870181Y-103826000D01* +X86872244Y-103830980D01* +X86872626Y-103836355D01* +X86883135Y-103863818D01* +X86954564Y-104006675D01* +X86970229Y-104031561D01* +X87014444Y-104069907D01* +X87069967Y-104088415D01* +X87128347Y-104084266D01* +X87180696Y-104058092D01* +X87219043Y-104013876D01* +X87237550Y-103958354D01* +X87233401Y-103899974D01* +X87222892Y-103872510D01* +X87167299Y-103761325D01* +X87167299Y-103546431D01* +X87200531Y-103479967D01* +X87266995Y-103446736D01* +X87281737Y-103446736D01* +X87295871Y-103475003D01* +X87295871Y-103796736D01* +X87298753Y-103826000D01* +X87300815Y-103830978D01* +X87301197Y-103836354D01* +X87311707Y-103863818D01* +X87383135Y-104006675D01* +X87386215Y-104011569D01* +X87386985Y-104013877D01* +X87389477Y-104016750D01* +X87398800Y-104031561D01* +X87413011Y-104043885D01* +X87425332Y-104058092D01* +X87440139Y-104067413D01* +X87443015Y-104069907D01* +X87445323Y-104070676D01* +X87450217Y-104073757D01* +X87593075Y-104145185D01* +X87620538Y-104155695D01* +X87625913Y-104156076D01* +X87630892Y-104158139D01* +X87660156Y-104161021D01* +X87803013Y-104161021D01* +X87832277Y-104158139D01* +X87837255Y-104156076D01* +X87842631Y-104155695D01* +X87870094Y-104145185D01* +X88012953Y-104073757D01* +X88017846Y-104070676D01* +X88020155Y-104069907D01* +X88023029Y-104067413D01* +X88037838Y-104058092D01* +X88050162Y-104043882D01* +X88064370Y-104031560D01* +X88073689Y-104016755D01* +X88076185Y-104013878D01* +X88076955Y-104011567D01* +X88080035Y-104006675D01* +X88151463Y-103863817D01* +X88161973Y-103836354D01* +X88162354Y-103830978D01* +X88164417Y-103826000D01* +X88167299Y-103796736D01* +X88167299Y-103439593D01* +X88164417Y-103410329D01* +X88162354Y-103405350D01* +X88161973Y-103399975D01* +X88151463Y-103372512D01* +X88148010Y-103365607D01* +X88164417Y-103326000D01* +X88164417Y-103267472D01* +X88142019Y-103213400D01* +X88100635Y-103172016D01* +X88046563Y-103149618D01* +X88017299Y-103146736D01* +X87231585Y-103146736D01* +X87202321Y-103149618D01* +X87197342Y-103151680D01* +X87191967Y-103152062D01* +X87164504Y-103162572D01* +X87021646Y-103234000D01* +X87016752Y-103237080D01* +X87014444Y-103237850D01* +X87011568Y-103240343D01* +X86996761Y-103249665D01* +X86984440Y-103263871D01* +X86970229Y-103276196D01* +X86960906Y-103291006D01* +X86958414Y-103293880D01* +X86957644Y-103296187D01* +X86954564Y-103301082D01* +X86883135Y-103443939D01* +X86872626Y-103471402D01* +X86872244Y-103476776D01* +X86870181Y-103481757D01* +X86867299Y-103511021D01* +X86200632Y-103511021D01* +X86200632Y-102553186D01* +X86370181Y-102553186D01* +X86370181Y-102611714D01* +X86392579Y-102665786D01* +X86433963Y-102707170D01* +X86488035Y-102729568D01* +X86517299Y-102732450D01* +X87803013Y-102732450D01* +X87832277Y-102729568D01* +X87837254Y-102727506D01* +X87842632Y-102727124D01* +X87870095Y-102716614D01* +X88012953Y-102645185D01* +X88017847Y-102642104D01* +X88020155Y-102641335D01* +X88023028Y-102638842D01* +X88037839Y-102629520D01* +X88050163Y-102615308D01* +X88064370Y-102602988D01* +X88073691Y-102588180D01* +X88076185Y-102585305D01* +X88076954Y-102582996D01* +X88080035Y-102578103D01* +X88151463Y-102435245D01* +X88161973Y-102407782D01* +X88166121Y-102349402D01* +X88147613Y-102293879D01* +X88109266Y-102249664D01* +X88056917Y-102223490D01* +X87998537Y-102219342D01* +X87943015Y-102237850D01* +X87898800Y-102276196D01* +X87883135Y-102301082D01* +X87834067Y-102399217D01* +X87767603Y-102432450D01* +X86517299Y-102432450D01* +X86488035Y-102435332D01* +X86433963Y-102457730D01* +X86392579Y-102499114D01* +X86370181Y-102553186D01* +X86200632Y-102553186D01* +X86200632Y-101368164D01* +X86867299Y-101368164D01* +X86867299Y-101653879D01* +X86870181Y-101683143D01* +X86872244Y-101688123D01* +X86872626Y-101693498D01* +X86883135Y-101720961D01* +X86954564Y-101863818D01* +X86970229Y-101888704D01* +X87014444Y-101927050D01* +X87069967Y-101945558D01* +X87128347Y-101941409D01* +X87180696Y-101915235D01* +X87219043Y-101871019D01* +X87237550Y-101815497D01* +X87233401Y-101757117D01* +X87222892Y-101729653D01* +X87167299Y-101618468D01* +X87167299Y-101403574D01* +X87200531Y-101337110D01* +X87266995Y-101303879D01* +X87281737Y-101303879D01* +X87295871Y-101332146D01* +X87295871Y-101653879D01* +X87298753Y-101683143D01* +X87300815Y-101688121D01* +X87301197Y-101693497D01* +X87311707Y-101720961D01* +X87383135Y-101863818D01* +X87386215Y-101868712D01* +X87386985Y-101871020D01* +X87389477Y-101873893D01* +X87398800Y-101888704D01* +X87413011Y-101901028D01* +X87425332Y-101915235D01* +X87440139Y-101924556D01* +X87443015Y-101927050D01* +X87445323Y-101927819D01* +X87450217Y-101930900D01* +X87593075Y-102002328D01* +X87620538Y-102012838D01* +X87625913Y-102013219D01* +X87630892Y-102015282D01* +X87660156Y-102018164D01* +X87803013Y-102018164D01* +X87832277Y-102015282D01* +X87837255Y-102013219D01* +X87842631Y-102012838D01* +X87870094Y-102002328D01* +X88012953Y-101930900D01* +X88017846Y-101927819D01* +X88020155Y-101927050D01* +X88023029Y-101924556D01* +X88037838Y-101915235D01* +X88050162Y-101901025D01* +X88064370Y-101888703D01* +X88073689Y-101873898D01* +X88076185Y-101871021D01* +X88076955Y-101868710D01* +X88080035Y-101863818D01* +X88151463Y-101720960D01* +X88161973Y-101693497D01* +X88162354Y-101688121D01* +X88164417Y-101683143D01* +X88167299Y-101653879D01* +X88167299Y-101296736D01* +X88164417Y-101267472D01* +X88162354Y-101262493D01* +X88161973Y-101257118D01* +X88151463Y-101229655D01* +X88148010Y-101222750D01* +X88164417Y-101183143D01* +X88164417Y-101124615D01* +X88142019Y-101070543D01* +X88100635Y-101029159D01* +X88046563Y-101006761D01* +X88017299Y-101003879D01* +X87231585Y-101003879D01* +X87202321Y-101006761D01* +X87197342Y-101008823D01* +X87191967Y-101009205D01* +X87164504Y-101019715D01* +X87021646Y-101091143D01* +X87016752Y-101094223D01* +X87014444Y-101094993D01* +X87011568Y-101097486D01* +X86996761Y-101106808D01* +X86984440Y-101121014D01* +X86970229Y-101133339D01* +X86960906Y-101148149D01* +X86958414Y-101151023D01* +X86957644Y-101153330D01* +X86954564Y-101158225D01* +X86883135Y-101301082D01* +X86872626Y-101328545D01* +X86872244Y-101333919D01* +X86870181Y-101338900D01* +X86867299Y-101368164D01* +X86200632Y-101368164D01* +X86200632Y-100082450D01* +X86867299Y-100082450D01* +X86867299Y-100296736D01* +X86870181Y-100326000D01* +X86872244Y-100330980D01* +X86872626Y-100336355D01* +X86883135Y-100363818D01* +X86954564Y-100506675D01* +X86957644Y-100511569D01* +X86958414Y-100513877D01* +X86960906Y-100516750D01* +X86970229Y-100531561D01* +X86984440Y-100543885D01* +X86996761Y-100558092D01* +X87011568Y-100567413D01* +X87014444Y-100569907D01* +X87016752Y-100570676D01* +X87021646Y-100573757D01* +X87164504Y-100645185D01* +X87191967Y-100655695D01* +X87197342Y-100656076D01* +X87202321Y-100658139D01* +X87231585Y-100661021D01* +X87303013Y-100661021D01* +X87332277Y-100658139D01* +X87337255Y-100656076D01* +X87342631Y-100655695D01* +X87370094Y-100645185D01* +X87512953Y-100573757D01* +X87517846Y-100570676D01* +X87520155Y-100569907D01* +X87523029Y-100567413D01* +X87537838Y-100558092D01* +X87550162Y-100543882D01* +X87564370Y-100531560D01* +X87573689Y-100516755D01* +X87576185Y-100513878D01* +X87576955Y-100511567D01* +X87580035Y-100506675D01* +X87651463Y-100363817D01* +X87661973Y-100336354D01* +X87662354Y-100330978D01* +X87664417Y-100326000D01* +X87667299Y-100296736D01* +X87667299Y-100117860D01* +X87700531Y-100051395D01* +X87766995Y-100018164D01* +X87767603Y-100018164D01* +X87834067Y-100051396D01* +X87867299Y-100117859D01* +X87867299Y-100332754D01* +X87811707Y-100443939D01* +X87801197Y-100471403D01* +X87797049Y-100529783D01* +X87815557Y-100585305D01* +X87853904Y-100629520D01* +X87906253Y-100655695D01* +X87964633Y-100659843D01* +X88020155Y-100641335D01* +X88064370Y-100602988D01* +X88080035Y-100578103D01* +X88151463Y-100435245D01* +X88161973Y-100407782D01* +X88162354Y-100402406D01* +X88164417Y-100397428D01* +X88167299Y-100368164D01* +X88167299Y-100082450D01* +X88164417Y-100053186D01* +X88162354Y-100048207D01* +X88161973Y-100042832D01* +X88151463Y-100015369D01* +X88080035Y-99872511D01* +X88076954Y-99867617D01* +X88076185Y-99865309D01* +X88073691Y-99862433D01* +X88064370Y-99847626D01* +X88050163Y-99835305D01* +X88037839Y-99821094D01* +X88023028Y-99811771D01* +X88020155Y-99809279D01* +X88017847Y-99808509D01* +X88012953Y-99805429D01* +X87870095Y-99734000D01* +X87842632Y-99723490D01* +X87837254Y-99723107D01* +X87832277Y-99721046D01* +X87803013Y-99718164D01* +X87731585Y-99718164D01* +X87702321Y-99721046D01* +X87697340Y-99723109D01* +X87691966Y-99723491D01* +X87664502Y-99734000D01* +X87521646Y-99805429D01* +X87516751Y-99808509D01* +X87514444Y-99809279D01* +X87511569Y-99811771D01* +X87496760Y-99821094D01* +X87484436Y-99835303D01* +X87470229Y-99847625D01* +X87460909Y-99862430D01* +X87458413Y-99865309D01* +X87457642Y-99867620D01* +X87454564Y-99872511D01* +X87383135Y-100015368D01* +X87372626Y-100042831D01* +X87372244Y-100048205D01* +X87370181Y-100053186D01* +X87367299Y-100082450D01* +X87367299Y-100261326D01* +X87334067Y-100327789D01* +X87267604Y-100361021D01* +X87266995Y-100361021D01* +X87200531Y-100327789D01* +X87167299Y-100261325D01* +X87167299Y-100117860D01* +X87222892Y-100006676D01* +X87233401Y-99979212D01* +X87237550Y-99920832D01* +X87219043Y-99865310D01* +X87180696Y-99821094D01* +X87128347Y-99794920D01* +X87069967Y-99790771D01* +X87014444Y-99809279D01* +X86970229Y-99847625D01* +X86954564Y-99872511D01* +X86883135Y-100015368D01* +X86872626Y-100042831D01* +X86872244Y-100048205D01* +X86870181Y-100053186D01* +X86867299Y-100082450D01* +X86200632Y-100082450D01* +X86200632Y-99196043D01* +X87727324Y-99196043D01* +X87727324Y-99196044D01* +X87727324Y-99196045D01* +X87727324Y-99254571D01* +X87729550Y-99259944D01* +X87749721Y-99308642D01* +X87749722Y-99308643D01* +X87768377Y-99331374D01* +X87839806Y-99402802D01* +X87862535Y-99421455D01* +X87862536Y-99421456D01* +X87916608Y-99443853D01* +X87916609Y-99443853D01* +X87975134Y-99443853D01* +X88029206Y-99421456D01* +X88051937Y-99402801D01* +X88123365Y-99331373D01* +X88142020Y-99308643D01* +X88151296Y-99286245D01* +X88164417Y-99254571D01* +X88164417Y-99196043D01* +X88142020Y-99141973D01* +X88142020Y-99141972D01* +X88123366Y-99119242D01* +X88051938Y-99047813D01* +X88029207Y-99029158D01* +X88029206Y-99029157D01* +X87997532Y-99016037D01* +X87975135Y-99006760D01* +X87975134Y-99006760D01* +X87916608Y-99006760D01* +X87862536Y-99029157D01* +X87839805Y-99047812D01* +X87768376Y-99119241D01* +X87749721Y-99141972D01* +X87749721Y-99141973D01* +X87727324Y-99196043D01* +X86200632Y-99196043D01* +X86200632Y-98153878D01* +X86367299Y-98153878D01* +X86367299Y-98296735D01* +X86370181Y-98325999D01* +X86372244Y-98330979D01* +X86372626Y-98336354D01* +X86383135Y-98363817D01* +X86454564Y-98506674D01* +X86457642Y-98511564D01* +X86458413Y-98513876D01* +X86460909Y-98516754D01* +X86470229Y-98531560D01* +X86484436Y-98543881D01* +X86496760Y-98558091D01* +X86511569Y-98567413D01* +X86514444Y-98569906D01* +X86516751Y-98570675D01* +X86521646Y-98573756D01* +X86664502Y-98645185D01* +X86691966Y-98655694D01* +X86697340Y-98656075D01* +X86702321Y-98658139D01* +X86731585Y-98661021D01* +X86867299Y-98661021D01* +X86867299Y-98725306D01* +X86870181Y-98754570D01* +X86892579Y-98808642D01* +X86933963Y-98850026D01* +X86988035Y-98872424D01* +X87046563Y-98872424D01* +X87100635Y-98850026D01* +X87142019Y-98808642D01* +X87164417Y-98754570D01* +X87167299Y-98725306D01* +X87167299Y-98661021D01* +X88017299Y-98661021D01* +X88046563Y-98658139D01* +X88100635Y-98635741D01* +X88142019Y-98594357D01* +X88164417Y-98540285D01* +X88164417Y-98481757D01* +X88142019Y-98427685D01* +X88100635Y-98386301D01* +X88046563Y-98363903D01* +X88017299Y-98361021D01* +X87167299Y-98361021D01* +X87167299Y-98153878D01* +X87164417Y-98124614D01* +X87142019Y-98070542D01* +X87100635Y-98029158D01* +X87046563Y-98006760D01* +X86988035Y-98006760D01* +X86933963Y-98029158D01* +X86892579Y-98070542D01* +X86870181Y-98124614D01* +X86867299Y-98153878D01* +X86867299Y-98361021D01* +X86766995Y-98361021D01* +X86700531Y-98327789D01* +X86667299Y-98261324D01* +X86667299Y-98153878D01* +X86664417Y-98124614D01* +X86642019Y-98070542D01* +X86600635Y-98029158D01* +X86546563Y-98006760D01* +X86488035Y-98006760D01* +X86433963Y-98029158D01* +X86392579Y-98070542D01* +X86370181Y-98124614D01* +X86367299Y-98153878D01* +X86200632Y-98153878D01* +X86200632Y-97225306D01* +X86867299Y-97225306D01* +X86867299Y-97368163D01* +X86870181Y-97397427D01* +X86872242Y-97402404D01* +X86872625Y-97407782D01* +X86883135Y-97435245D01* +X86931382Y-97531739D01* +X86892579Y-97570542D01* +X86870181Y-97624614D01* +X86870181Y-97683142D01* +X86892579Y-97737214D01* +X86933963Y-97778598D01* +X86988035Y-97800996D01* +X87017299Y-97803878D01* +X88017299Y-97803878D01* +X88046563Y-97800996D01* +X88100635Y-97778598D01* +X88142019Y-97737214D01* +X88164417Y-97683142D01* +X88164417Y-97624614D01* +X88142019Y-97570542D01* +X88100635Y-97529158D01* +X88046563Y-97506760D01* +X88017299Y-97503878D01* +X87338423Y-97503878D01* +X87249010Y-97459171D01* +X87212006Y-97422167D01* +X87167299Y-97332753D01* +X87167299Y-97225306D01* +X87164417Y-97196042D01* +X87142019Y-97141970D01* +X87100635Y-97100586D01* +X87046563Y-97078188D01* +X86988035Y-97078188D01* +X86933963Y-97100586D01* +X86892579Y-97141970D01* +X86870181Y-97196042D01* +X86867299Y-97225306D01* +X86200632Y-97225306D01* +X86200632Y-96911521D01* +X88333966Y-96911521D01* +X88333966Y-105324806D01* +G37* +D12* +%TO.P,C13,1*% +%TO.N,Net-(VCC_B2-Pin_1)*% +X59400000Y-90120000D03* +D13* +%TO.P,C13,2*% +%TO.N,GND*% +X59400000Y-87580000D03* +%TD*% +D12* +%TO.P,R16,1*% +%TO.N,Net-(IC2-Pad6)*% +X64480000Y-97740000D03* +D13* +%TO.P,R16,2*% +%TO.N,Net-(C10-Pad2)*% +X67020000Y-97740000D03* +%TD*% +D14* +%TO.P,X1,1,Pin_1*% +%TO.N,GND*% +X72100000Y-156160000D03* +%TD*% +D12* +%TO.P,R1,1*% +%TO.N,Net-(C3-Pad1)*% +X87340000Y-128220000D03* +D13* +%TO.P,R1,2*% +%TO.N,Net-(X3A1-Pin_1)*% +X87340000Y-130760000D03* +%TD*% +D12* +%TO.P,R6,1*% +%TO.N,Net-(IC1-Pad6)*% +X77180000Y-97740000D03* +D13* +%TO.P,R6,2*% +%TO.N,Net-(C3-Pad2)*% +X79720000Y-97740000D03* +%TD*% +D12* +%TO.P,R19,1*% +%TO.N,Net-(C11-Pad2)*% +X64480000Y-102820000D03* +D13* +%TO.P,R19,2*% +%TO.N,Net-(IC2-Pad6)*% +X67020000Y-102820000D03* +%TD*% +D15* +%TO.P,C12,1*% +%TO.N,Net-(C12-Pad1)*% +X67020000Y-110440000D03* +D16* +%TO.P,C12,2*% +%TO.N,GND*% +X69020000Y-110440000D03* +%TD*% +D17* +%TO.P,C11,1*% +%TO.N,Net-(C11-Pad1)*% +X63520000Y-135840000D03* +D18* +%TO.P,C11,2*% +%TO.N,Net-(C11-Pad2)*% +X67020000Y-135840000D03* +%TD*% +D12* +%TO.P,R14,1*% +%TO.N,Net-(D2-K)*% +X61940000Y-120600000D03* +D13* +%TO.P,R14,2*% +%TO.N,Net-(C11-Pad1)*% +X61940000Y-123140000D03* +%TD*% +D15* +%TO.P,C9,1*% +%TO.N,Net-(D2-K)*% +X67020000Y-125680000D03* +D16* +%TO.P,C9,2*% +%TO.N,GND*% +X67020000Y-127680000D03* +%TD*% +D19* +%TO.P,R20,1*% +%TO.N,Net-(C12-Pad1)*% +X53690000Y-82500000D03* +%TO.P,R20,2*% +%TO.N,Net-(SGNL_B1-Pin_1)*% +X70190000Y-82500000D03* +%TD*% +%TO.P,R10,1*% +%TO.N,Net-(C5-Pad1)*% +X74010000Y-82500000D03* +%TO.P,R10,2*% +%TO.N,Net-(SGNL_A1-Pin_1)*% +X90510000Y-82500000D03* +%TD*% +D17* +%TO.P,C4,1*% +%TO.N,Net-(C4-Pad1)*% +X77180000Y-135840000D03* +D18* +%TO.P,C4,2*% +%TO.N,Net-(C4-Pad2)*% +X80680000Y-135840000D03* +%TD*% +D14* +%TO.P,X3B1,1,Pin_1*% +%TO.N,Net-(X3B1-Pin_1)*% +X61940000Y-156160000D03* +%TD*% +D12* +%TO.P,R12,1*% +%TO.N,Net-(C11-Pad1)*% +X61940000Y-128220000D03* +D13* +%TO.P,R12,2*% +%TO.N,Net-(X2B1-Pin_1)*% +X61940000Y-130760000D03* +%TD*% +D12* +%TO.P,R8,1*% +%TO.N,Net-(VCC_A2-Pin_1)*% +X82260000Y-95200000D03* +D13* +%TO.P,R8,2*% +%TO.N,Net-(C5-Pad1)*% +X84800000Y-95200000D03* +%TD*% +D12* +%TO.P,R2,1*% +%TO.N,Net-(C4-Pad1)*% +X82260000Y-128220000D03* +D13* +%TO.P,R2,2*% +%TO.N,Net-(X2A1-Pin_1)*% +X82260000Y-130760000D03* +%TD*% +D12* +%TO.P,D1,1,K*% +%TO.N,Net-(D1-K)*% +X82260000Y-115520000D03* +D13* +%TO.P,D1,2,A*% +%TO.N,GND*% +X82260000Y-112980000D03* +%TD*% +D20* +%TO.P,C6,1*% +%TO.N,Net-(VCC_A2-Pin_1)*% +X84800000Y-90120000D03* +%TO.P,C6,2*% +%TO.N,GND*% +X84800000Y-87620000D03* +%TD*% +D12* +%TO.P,R9,1*% +%TO.N,Net-(C4-Pad2)*% +X77180000Y-102820000D03* +D13* +%TO.P,R9,2*% +%TO.N,Net-(IC1-Pad6)*% +X79720000Y-102820000D03* +%TD*% +D12* +%TO.P,D2,1,K*% +%TO.N,Net-(D2-K)*% +X56860000Y-115520000D03* +D13* +%TO.P,D2,2,A*% +%TO.N,GND*% +X56860000Y-112980000D03* +%TD*% +D12* +%TO.P,R15,1*% +%TO.N,Net-(VCC_B2-Pin_1)*% +X61940000Y-105360000D03* +D13* +%TO.P,R15,2*% +%TO.N,Net-(D2-K)*% +X61940000Y-107900000D03* +%TD*% +D12* +%TO.P,C8,1*% +%TO.N,Net-(D2-K)*% +X61940000Y-115520000D03* +D13* +%TO.P,C8,2*% +%TO.N,GND*% +X61940000Y-112980000D03* +%TD*% +D12* +%TO.P,R5,1*% +%TO.N,Net-(VCC_A2-Pin_1)*% +X82260000Y-105360000D03* +D13* +%TO.P,R5,2*% +%TO.N,Net-(D1-K)*% +X82260000Y-107900000D03* +%TD*% +D14* +%TO.P,X3A1,1,Pin_1*% +%TO.N,Net-(X3A1-Pin_1)*% +X82260000Y-156160000D03* +%TD*% +D12* +%TO.P,R18,1*% +%TO.N,Net-(VCC_B2-Pin_1)*% +X59400000Y-95200000D03* +D13* +%TO.P,R18,2*% +%TO.N,Net-(C12-Pad1)*% +X61940000Y-95200000D03* +%TD*% +D15* +%TO.P,C7,1*% +%TO.N,Net-(VCC_A2-Pin_1)*% +X77180000Y-118060000D03* +D16* +%TO.P,C7,2*% +%TO.N,GND*% +X77180000Y-120060000D03* +%TD*% +D12* +%TO.P,R7,1*% +%TO.N,Net-(C5-Pad1)*% +X89880000Y-90120000D03* +D13* +%TO.P,R7,2*% +%TO.N,GND*% +X89880000Y-87580000D03* +%TD*% +D14* +%TO.P,X2B1,1,Pin_1*% +%TO.N,Net-(X2B1-Pin_1)*% +X67020000Y-156160000D03* +%TD*% +%TO.P,SGNL_A1,1,Pin_1*% +%TO.N,Net-(SGNL_A1-Pin_1)*% +X77180000Y-69800000D03* +%TD*% +D12* +%TO.P,C1,1*% +%TO.N,Net-(D1-K)*% +X87340000Y-115520000D03* +D13* +%TO.P,C1,2*% +%TO.N,GND*% +X87340000Y-112980000D03* +%TD*% +D14* +%TO.P,VCC_A2,1,Pin_1*% +%TO.N,Net-(VCC_A2-Pin_1)*% +X83530000Y-69800000D03* +%TD*% +%TO.P,SGNL_B1,1,Pin_1*% +%TO.N,Net-(SGNL_B1-Pin_1)*% +X67020000Y-69800000D03* +%TD*% +D17* +%TO.P,C10,1*% +%TO.N,Net-(C10-Pad1)*% +X63520000Y-146000000D03* +D18* +%TO.P,C10,2*% +%TO.N,Net-(C10-Pad2)*% +X67020000Y-146000000D03* +%TD*% +D12* +%TO.P,R3,1*% +%TO.N,Net-(D1-K)*% +X87340000Y-120600000D03* +D13* +%TO.P,R3,2*% +%TO.N,Net-(C3-Pad1)*% +X87340000Y-123140000D03* +%TD*% +D12* +%TO.P,R11,1*% +%TO.N,Net-(C10-Pad1)*% +X56860000Y-128220000D03* +D13* +%TO.P,R11,2*% +%TO.N,Net-(X3B1-Pin_1)*% +X56860000Y-130760000D03* +%TD*% +D14* +%TO.P,GND_B1,1,Pin_1*% +%TO.N,GND*% +X54320000Y-69800000D03* +%TD*% +D15* +%TO.P,C5,1*% +%TO.N,Net-(C5-Pad1)*% +X75180000Y-110440000D03* +D16* +%TO.P,C5,2*% +%TO.N,GND*% +X77180000Y-110440000D03* +%TD*% +D15* +%TO.P,C2,1*% +%TO.N,Net-(D1-K)*% +X77180000Y-125680000D03* +D16* +%TO.P,C2,2*% +%TO.N,GND*% +X77180000Y-127680000D03* +%TD*% +D14* +%TO.P,GND_A1,1,Pin_1*% +%TO.N,GND*% +X89880000Y-69800000D03* +%TD*% +D12* +%TO.P,R13,1*% +%TO.N,Net-(D2-K)*% +X56860000Y-120600000D03* +D13* +%TO.P,R13,2*% +%TO.N,Net-(C10-Pad1)*% +X56860000Y-123140000D03* +%TD*% +D14* +%TO.P,VCC_B2,1,Pin_1*% +%TO.N,Net-(VCC_B2-Pin_1)*% +X60670000Y-69800000D03* +%TD*% +D21* +%TO.P,VCC_A1,1,Pin_1*% +%TO.N,Net-(D1-K)*% +X87340000Y-107900000D03* +%TD*% +D12* +%TO.P,R17,1*% +%TO.N,Net-(C12-Pad1)*% +X54320000Y-87580000D03* +D13* +%TO.P,R17,2*% +%TO.N,GND*% +X54320000Y-90120000D03* +%TD*% +D17* +%TO.P,C3,1*% +%TO.N,Net-(C3-Pad1)*% +X77180000Y-146000000D03* +D18* +%TO.P,C3,2*% +%TO.N,Net-(C3-Pad2)*% +X80680000Y-146000000D03* +%TD*% +D12* +%TO.P,R4,1*% +%TO.N,Net-(D1-K)*% +X82260000Y-120600000D03* +D13* +%TO.P,R4,2*% +%TO.N,Net-(C4-Pad1)*% +X82260000Y-123140000D03* +%TD*% +D21* +%TO.P,VCC_B1,1,Pin_1*% +%TO.N,Net-(D2-K)*% +X56860000Y-107900000D03* +%TD*% +D15* +%TO.P,C14,1*% +%TO.N,Net-(VCC_B2-Pin_1)*% +X67020000Y-118060000D03* +D16* +%TO.P,C14,2*% +%TO.N,GND*% +X67020000Y-120060000D03* +%TD*% +D14* +%TO.P,X2A1,1,Pin_1*% +%TO.N,Net-(X2A1-Pin_1)*% +X77180000Y-156160000D03* +%TD*% +D22* +%TO.N,GND*% +X69020000Y-88803500D03* +X60095148Y-92286039D03* +%TO.N,Net-(C5-Pad1)*% +X78573700Y-94209900D03* +%TD*% +D23* +%TO.N,Net-(D1-K)*% +X82260000Y-108927000D02* +X81201300Y-109986000D01* +X87340000Y-115520000D02* +X87340000Y-120600000D01* +X81201300Y-114461000D02* +X82260000Y-115520000D01* +X82260000Y-120600000D02* +X82260000Y-115520000D01* +X81201300Y-109986000D02* +X81201300Y-114461000D01* +X82260000Y-107900000D02* +X82260000Y-108927000D01* +%TO.N,Net-(C3-Pad1)*% +X87340000Y-123140000D02* +X87340000Y-128220000D01* +%TO.N,GND*% +X64094700Y-113620000D02* +X64094700Y-117135000D01* +X58313400Y-107839000D02* +X64094700Y-113620000D01* +X69020000Y-88803500D02* +X65476500Y-85260000D01* +X78056900Y-126803000D02* +X78056900Y-111317000D01* +X64094700Y-117135000D02* +X67020000Y-120060000D01* +X59400000Y-87580000D02* +X59400000Y-88606900D01* +X59400000Y-88606900D02* +X58313400Y-89693500D01* +X72100000Y-132760000D02* +X72100000Y-156160000D01* +X62920000Y-85260000D02* +X62420000Y-85760000D01* +X54320000Y-90120000D02* +X52690000Y-88490000D01* +X77180000Y-127680000D02* +X72100000Y-132760000D01* +X52690000Y-88490000D02* +X52690000Y-71430000D01* +X65476500Y-85260000D02* +X62920000Y-85260000D01* +X78056900Y-111317000D02* +X77180000Y-110440000D01* +X62420000Y-89961187D02* +X60095148Y-92286039D01* +X62420000Y-85760000D02* +X62420000Y-89961187D01* +X69020000Y-110440000D02* +X69020000Y-88803500D01* +X52690000Y-71430000D02* +X54320000Y-69800000D01* +X58313400Y-89693500D02* +X58313400Y-107839000D01* +X77180000Y-127680000D02* +X78056900Y-126803000D01* +%TO.N,Net-(C3-Pad2)*% +X81661100Y-131613000D02* +X80749400Y-130702000D01* +X80749400Y-99796300D02* +X79720000Y-98766900D01* +X81661100Y-145019000D02* +X81661100Y-131613000D01* +X80680000Y-146000000D02* +X81661100Y-145019000D01* +X80749400Y-130702000D02* +X80749400Y-99796300D01* +X79720000Y-98766900D02* +X79720000Y-97740000D01* +%TO.N,Net-(C4-Pad1)*% +X82260000Y-123140000D02* +X82260000Y-128220000D01* +%TO.N,Net-(C5-Pad1)*% +X75180000Y-110440000D02* +X75180000Y-94209900D01* +X74010000Y-82500000D02* +X74010000Y-93039900D01* +X75180000Y-94209900D02* +X78573700Y-94209900D01* +X74010000Y-93039900D02* +X75180000Y-94209900D01* +%TO.N,Net-(VCC_A2-Pin_1)*% +X82260000Y-91390000D02* +X82260000Y-95200000D01* +X84800000Y-90120000D02* +X83530000Y-90120000D01* +X83530000Y-90120000D02* +X83530000Y-69800000D01* +X82260000Y-95200000D02* +X82260000Y-105360000D01* +X83530000Y-90120000D02* +X82260000Y-91390000D01* +%TO.N,Net-(D2-K)*% +X55824700Y-114485000D02* +X55824700Y-108935000D01* +X56860000Y-115520000D02* +X55824700Y-114485000D01* +X56860000Y-120600000D02* +X56860000Y-115520000D01* +X55824700Y-108935000D02* +X56860000Y-107900000D01* +X61940000Y-115520000D02* +X61940000Y-120600000D01* +%TO.N,Net-(C10-Pad1)*% +X62103700Y-143619000D02* +X63520000Y-145036000D01* +X63520000Y-145036000D02* +X63520000Y-146000000D01* +X56860000Y-128220000D02* +X62103700Y-133464000D01* +X56860000Y-123140000D02* +X56860000Y-128220000D01* +X62103700Y-133464000D02* +X62103700Y-143619000D01* +%TO.N,Net-(C10-Pad2)*% +X68051400Y-99798300D02* +X68051400Y-144969000D01* +X67020000Y-97740000D02* +X67020000Y-98766900D01* +X68051400Y-144969000D02* +X67020000Y-146000000D01* +X67020000Y-98766900D02* +X68051400Y-99798300D01* +%TO.N,Net-(C11-Pad1)*% +X63520000Y-135840000D02* +X63520000Y-129800000D01* +X61940000Y-128220000D02* +X61940000Y-123140000D01* +X63520000Y-129800000D02* +X61940000Y-128220000D01* +%TO.N,Net-(C12-Pad1)*% +X67020000Y-106931000D02* +X67020000Y-110440000D01* +X54320000Y-83130000D02* +X53690000Y-82500000D01* +X54320000Y-87580000D02* +X54320000Y-83130000D01* +X61940000Y-95200000D02* +X61940000Y-101851000D01* +X61940000Y-101851000D02* +X67020000Y-106931000D01* +%TO.N,Net-(VCC_B2-Pin_1)*% +X67020000Y-117183000D02* +X66143100Y-116306000D01* +X59400000Y-102820000D02* +X59400000Y-95200000D01* +X66143100Y-116306000D02* +X66143100Y-109563000D01* +X61940000Y-105360000D02* +X59400000Y-102820000D01* +X66143100Y-109563000D02* +X61940000Y-105360000D01* +X59400000Y-90120000D02* +X59400000Y-95200000D01* +X59400000Y-90120000D02* +X60670000Y-88850000D01* +X60670000Y-88850000D02* +X60670000Y-69800000D01* +X67020000Y-118060000D02* +X67020000Y-117183000D01* +%TO.N,Net-(SGNL_B1-Pin_1)*% +X67020000Y-79330000D02* +X70190000Y-82500000D01* +X67020000Y-69800000D02* +X67020000Y-79330000D01* +%TO.N,Net-(IC2-Pad6)*% +X64480000Y-99253100D02* +X64480000Y-97740000D01* +X67020000Y-101793000D02* +X64480000Y-99253100D01* +X67020000Y-102820000D02* +X67020000Y-101793000D01* +%TO.N,Net-(X3A1-Pin_1)*% +X87340000Y-130760000D02* +X87340000Y-151080000D01* +X87340000Y-151080000D02* +X82260000Y-156160000D01* +%TO.N,Net-(X2A1-Pin_1)*% +X82260000Y-130760000D02* +X82260000Y-151080000D01* +X82260000Y-151080000D02* +X77180000Y-156160000D01* +%TO.N,Net-(X3B1-Pin_1)*% +X56860000Y-151080000D02* +X61940000Y-156160000D01* +X56860000Y-130760000D02* +X56860000Y-151080000D01* +%TO.N,Net-(X2B1-Pin_1)*% +X64484400Y-153624000D02* +X67020000Y-156160000D01* +X64484400Y-138542000D02* +X64484400Y-153624000D01* +X62555600Y-136613000D02* +X64484400Y-138542000D01* +X61940000Y-131787000D02* +X62555600Y-132402000D01* +X62555600Y-132402000D02* +X62555600Y-136613000D01* +X61940000Y-130760000D02* +X61940000Y-131787000D01* +%TD*% +M02* diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/gerbers_v2/mic_preamp_pcb_prototype_p2-F_Mask.gts b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/gerbers_v2/mic_preamp_pcb_prototype_p2-F_Mask.gts new file mode 100644 index 0000000..35d78ea --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/gerbers_v2/mic_preamp_pcb_prototype_p2-F_Mask.gts @@ -0,0 +1,296 @@ +%TF.GenerationSoftware,KiCad,Pcbnew,9.0.8-1.fc42*% +%TF.CreationDate,2026-04-23T23:16:55+02:00*% +%TF.ProjectId,mic_preamp_pcb_prototype_p2,6d69635f-7072-4656-916d-705f7063625f,rev?*% +%TF.SameCoordinates,Original*% +%TF.FileFunction,Soldermask,Top*% +%TF.FilePolarity,Negative*% +%FSLAX46Y46*% +G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)* +G04 Created by KiCad (PCBNEW 9.0.8-1.fc42) date 2026-04-23 23:16:55* +%MOMM*% +%LPD*% +G01* +G04 APERTURE LIST* +%ADD10C,1.400000*% +%ADD11O,1.400000X1.400000*% +%ADD12O,3.500000X2.700000*% +%ADD13C,3.000000*% +%ADD14R,1.100000X1.100000*% +%ADD15C,1.100000*% +%ADD16R,1.275000X1.275000*% +%ADD17C,1.275000*% +%ADD18C,1.350000*% +%ADD19C,1.200000*% +%ADD20C,2.000000*% +G04 APERTURE END LIST* +D10* +%TO.C,C13*% +X59400000Y-90120000D03* +D11* +X59400000Y-87580000D03* +%TD*% +D10* +%TO.C,R16*% +X64480000Y-97740000D03* +D11* +X67020000Y-97740000D03* +%TD*% +D12* +%TO.C,H1*% +X57495000Y-77591000D03* +%TD*% +D13* +%TO.C,X1*% +X72100000Y-156160000D03* +%TD*% +D10* +%TO.C,R1*% +X87340000Y-128220000D03* +D11* +X87340000Y-130760000D03* +%TD*% +D10* +%TO.C,R6*% +X77180000Y-97740000D03* +D11* +X79720000Y-97740000D03* +%TD*% +D10* +%TO.C,R19*% +X64480000Y-102820000D03* +D11* +X67020000Y-102820000D03* +%TD*% +D14* +%TO.C,C12*% +X67020000Y-110440000D03* +D15* +X69020000Y-110440000D03* +%TD*% +D16* +%TO.C,C11*% +X63520000Y-135840000D03* +D17* +X67020000Y-135840000D03* +%TD*% +D10* +%TO.C,R14*% +X61940000Y-120600000D03* +D11* +X61940000Y-123140000D03* +%TD*% +D14* +%TO.C,C9*% +X67020000Y-125680000D03* +D15* +X67020000Y-127680000D03* +%TD*% +D18* +%TO.C,R20*% +X53690000Y-82500000D03* +X70190000Y-82500000D03* +%TD*% +%TO.C,R10*% +X74010000Y-82500000D03* +X90510000Y-82500000D03* +%TD*% +D16* +%TO.C,C4*% +X77180000Y-135840000D03* +D17* +X80680000Y-135840000D03* +%TD*% +D13* +%TO.C,X3B1*% +X61940000Y-156160000D03* +%TD*% +D10* +%TO.C,R12*% +X61940000Y-128220000D03* +D11* +X61940000Y-130760000D03* +%TD*% +D10* +%TO.C,R8*% +X82260000Y-95200000D03* +D11* +X84800000Y-95200000D03* +%TD*% +D10* +%TO.C,R2*% +X82260000Y-128220000D03* +D11* +X82260000Y-130760000D03* +%TD*% +D10* +%TO.C,D1*% +X82260000Y-115520000D03* +D11* +X82260000Y-112980000D03* +%TD*% +D19* +%TO.C,C6*% +X84800000Y-90120000D03* +X84800000Y-87620000D03* +%TD*% +D12* +%TO.C,H2*% +X86495000Y-77591000D03* +%TD*% +D10* +%TO.C,R9*% +X77180000Y-102820000D03* +D11* +X79720000Y-102820000D03* +%TD*% +D10* +%TO.C,D2*% +X56860000Y-115520000D03* +D11* +X56860000Y-112980000D03* +%TD*% +D10* +%TO.C,R15*% +X61940000Y-105360000D03* +D11* +X61940000Y-107900000D03* +%TD*% +D10* +%TO.C,C8*% +X61940000Y-115520000D03* +D11* +X61940000Y-112980000D03* +%TD*% +D10* +%TO.C,R5*% +X82260000Y-105360000D03* +D11* +X82260000Y-107900000D03* +%TD*% +D13* +%TO.C,X3A1*% +X82260000Y-156160000D03* +%TD*% +D10* +%TO.C,R18*% +X59400000Y-95200000D03* +D11* +X61940000Y-95200000D03* +%TD*% +D14* +%TO.C,C7*% +X77180000Y-118060000D03* +D15* +X77180000Y-120060000D03* +%TD*% +D10* +%TO.C,R7*% +X89880000Y-90120000D03* +D11* +X89880000Y-87580000D03* +%TD*% +D13* +%TO.C,X2B1*% +X67020000Y-156160000D03* +%TD*% +%TO.C,SGNL_A1*% +X77180000Y-69800000D03* +%TD*% +D10* +%TO.C,C1*% +X87340000Y-115520000D03* +D11* +X87340000Y-112980000D03* +%TD*% +D13* +%TO.C,VCC_A2*% +X83530000Y-69800000D03* +%TD*% +%TO.C,SGNL_B1*% +X67020000Y-69800000D03* +%TD*% +D16* +%TO.C,C10*% +X63520000Y-146000000D03* +D17* +X67020000Y-146000000D03* +%TD*% +D10* +%TO.C,R3*% +X87340000Y-120600000D03* +D11* +X87340000Y-123140000D03* +%TD*% +D10* +%TO.C,R11*% +X56860000Y-128220000D03* +D11* +X56860000Y-130760000D03* +%TD*% +D13* +%TO.C,GND_B1*% +X54320000Y-69800000D03* +%TD*% +D14* +%TO.C,C5*% +X75180000Y-110440000D03* +D15* +X77180000Y-110440000D03* +%TD*% +D14* +%TO.C,C2*% +X77180000Y-125680000D03* +D15* +X77180000Y-127680000D03* +%TD*% +D13* +%TO.C,GND_A1*% +X89880000Y-69800000D03* +%TD*% +D10* +%TO.C,R13*% +X56860000Y-120600000D03* +D11* +X56860000Y-123140000D03* +%TD*% +D13* +%TO.C,VCC_B2*% +X60670000Y-69800000D03* +%TD*% +D20* +%TO.C,VCC_A1*% +X87340000Y-107900000D03* +%TD*% +D10* +%TO.C,R17*% +X54320000Y-87580000D03* +D11* +X54320000Y-90120000D03* +%TD*% +D16* +%TO.C,C3*% +X77180000Y-146000000D03* +D17* +X80680000Y-146000000D03* +%TD*% +D10* +%TO.C,R4*% +X82260000Y-120600000D03* +D11* +X82260000Y-123140000D03* +%TD*% +D20* +%TO.C,VCC_B1*% +X56860000Y-107900000D03* +%TD*% +D14* +%TO.C,C14*% +X67020000Y-118060000D03* +D15* +X67020000Y-120060000D03* +%TD*% +D13* +%TO.C,X2A1*% +X77180000Y-156160000D03* +%TD*% +M02* diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/gerbers_v2/mic_preamp_pcb_prototype_p2-F_Paste.gtp b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/gerbers_v2/mic_preamp_pcb_prototype_p2-F_Paste.gtp new file mode 100644 index 0000000..7d07c81 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/gerbers_v2/mic_preamp_pcb_prototype_p2-F_Paste.gtp @@ -0,0 +1,15 @@ +%TF.GenerationSoftware,KiCad,Pcbnew,9.0.8-1.fc42*% +%TF.CreationDate,2026-04-23T23:16:55+02:00*% +%TF.ProjectId,mic_preamp_pcb_prototype_p2,6d69635f-7072-4656-916d-705f7063625f,rev?*% +%TF.SameCoordinates,Original*% +%TF.FileFunction,Paste,Top*% +%TF.FilePolarity,Positive*% +%FSLAX46Y46*% +G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)* +G04 Created by KiCad (PCBNEW 9.0.8-1.fc42) date 2026-04-23 23:16:55* +%MOMM*% +%LPD*% +G01* +G04 APERTURE LIST* +G04 APERTURE END LIST* +M02* diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/gerbers_v2/mic_preamp_pcb_prototype_p2-F_Silkscreen.gto b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/gerbers_v2/mic_preamp_pcb_prototype_p2-F_Silkscreen.gto new file mode 100644 index 0000000..b89ca26 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/gerbers_v2/mic_preamp_pcb_prototype_p2-F_Silkscreen.gto @@ -0,0 +1,4243 @@ +%TF.GenerationSoftware,KiCad,Pcbnew,9.0.8-1.fc42*% +%TF.CreationDate,2026-04-23T23:16:55+02:00*% +%TF.ProjectId,mic_preamp_pcb_prototype_p2,6d69635f-7072-4656-916d-705f7063625f,rev?*% +%TF.SameCoordinates,Original*% +%TF.FileFunction,Legend,Top*% +%TF.FilePolarity,Positive*% +%FSLAX46Y46*% +G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)* +G04 Created by KiCad (PCBNEW 9.0.8-1.fc42) date 2026-04-23 23:16:55* +%MOMM*% +%LPD*% +G01* +G04 APERTURE LIST* +%ADD10C,0.150000*% +%ADD11C,0.100000*% +%ADD12C,0.254000*% +%ADD13C,0.120000*% +%ADD14C,0.200000*% +G04 APERTURE END LIST* +D10* +X59748937Y-77591000D02* +G75* +G02* +X55241063Y-77591000I-2253937J0D01* +G01* +X55241063Y-77591000D02* +G75* +G02* +X59748937Y-77591000I2253937J0D01* +G01* +X88761321Y-77591000D02* +G75* +G02* +X84229449Y-77591000I-2265936J0D01* +G01* +X84229449Y-77591000D02* +G75* +G02* +X88761321Y-77591000I2265936J0D01* +G01* +X52102310Y-72210369D02* +X52007072Y-72162750D01* +X52007072Y-72162750D02* +X51864215Y-72162750D01* +X51864215Y-72162750D02* +X51721358Y-72210369D01* +X51721358Y-72210369D02* +X51626120Y-72305607D01* +X51626120Y-72305607D02* +X51578501Y-72400845D01* +X51578501Y-72400845D02* +X51530882Y-72591321D01* +X51530882Y-72591321D02* +X51530882Y-72734178D01* +X51530882Y-72734178D02* +X51578501Y-72924654D01* +X51578501Y-72924654D02* +X51626120Y-73019892D01* +X51626120Y-73019892D02* +X51721358Y-73115131D01* +X51721358Y-73115131D02* +X51864215Y-73162750D01* +X51864215Y-73162750D02* +X51959453Y-73162750D01* +X51959453Y-73162750D02* +X52102310Y-73115131D01* +X52102310Y-73115131D02* +X52149929Y-73067511D01* +X52149929Y-73067511D02* +X52149929Y-72734178D01* +X52149929Y-72734178D02* +X51959453Y-72734178D01* +X52578501Y-73162750D02* +X52578501Y-72162750D01* +X52578501Y-72162750D02* +X53149929Y-73162750D01* +X53149929Y-73162750D02* +X53149929Y-72162750D01* +X53626120Y-73162750D02* +X53626120Y-72162750D01* +X53626120Y-72162750D02* +X53864215Y-72162750D01* +X53864215Y-72162750D02* +X54007072Y-72210369D01* +X54007072Y-72210369D02* +X54102310Y-72305607D01* +X54102310Y-72305607D02* +X54149929Y-72400845D01* +X54149929Y-72400845D02* +X54197548Y-72591321D01* +X54197548Y-72591321D02* +X54197548Y-72734178D01* +X54197548Y-72734178D02* +X54149929Y-72924654D01* +X54149929Y-72924654D02* +X54102310Y-73019892D01* +X54102310Y-73019892D02* +X54007072Y-73115131D01* +X54007072Y-73115131D02* +X53864215Y-73162750D01* +X53864215Y-73162750D02* +X53626120Y-73162750D01* +X54388025Y-73257988D02* +X55149929Y-73257988D01* +X55721358Y-72638940D02* +X55864215Y-72686559D01* +X55864215Y-72686559D02* +X55911834Y-72734178D01* +X55911834Y-72734178D02* +X55959453Y-72829416D01* +X55959453Y-72829416D02* +X55959453Y-72972273D01* +X55959453Y-72972273D02* +X55911834Y-73067511D01* +X55911834Y-73067511D02* +X55864215Y-73115131D01* +X55864215Y-73115131D02* +X55768977Y-73162750D01* +X55768977Y-73162750D02* +X55388025Y-73162750D01* +X55388025Y-73162750D02* +X55388025Y-72162750D01* +X55388025Y-72162750D02* +X55721358Y-72162750D01* +X55721358Y-72162750D02* +X55816596Y-72210369D01* +X55816596Y-72210369D02* +X55864215Y-72257988D01* +X55864215Y-72257988D02* +X55911834Y-72353226D01* +X55911834Y-72353226D02* +X55911834Y-72448464D01* +X55911834Y-72448464D02* +X55864215Y-72543702D01* +X55864215Y-72543702D02* +X55816596Y-72591321D01* +X55816596Y-72591321D02* +X55721358Y-72638940D01* +X55721358Y-72638940D02* +X55388025Y-72638940D01* +X56911834Y-73162750D02* +X56340406Y-73162750D01* +X56626120Y-73162750D02* +X56626120Y-72162750D01* +X56626120Y-72162750D02* +X56530882Y-72305607D01* +X56530882Y-72305607D02* +X56435644Y-72400845D01* +X56435644Y-72400845D02* +X56340406Y-72448464D01* +X57880882Y-72162750D02* +X58214215Y-73162750D01* +X58214215Y-73162750D02* +X58547548Y-72162750D01* +X59452310Y-73067511D02* +X59404691Y-73115131D01* +X59404691Y-73115131D02* +X59261834Y-73162750D01* +X59261834Y-73162750D02* +X59166596Y-73162750D01* +X59166596Y-73162750D02* +X59023739Y-73115131D01* +X59023739Y-73115131D02* +X58928501Y-73019892D01* +X58928501Y-73019892D02* +X58880882Y-72924654D01* +X58880882Y-72924654D02* +X58833263Y-72734178D01* +X58833263Y-72734178D02* +X58833263Y-72591321D01* +X58833263Y-72591321D02* +X58880882Y-72400845D01* +X58880882Y-72400845D02* +X58928501Y-72305607D01* +X58928501Y-72305607D02* +X59023739Y-72210369D01* +X59023739Y-72210369D02* +X59166596Y-72162750D01* +X59166596Y-72162750D02* +X59261834Y-72162750D01* +X59261834Y-72162750D02* +X59404691Y-72210369D01* +X59404691Y-72210369D02* +X59452310Y-72257988D01* +X60452310Y-73067511D02* +X60404691Y-73115131D01* +X60404691Y-73115131D02* +X60261834Y-73162750D01* +X60261834Y-73162750D02* +X60166596Y-73162750D01* +X60166596Y-73162750D02* +X60023739Y-73115131D01* +X60023739Y-73115131D02* +X59928501Y-73019892D01* +X59928501Y-73019892D02* +X59880882Y-72924654D01* +X59880882Y-72924654D02* +X59833263Y-72734178D01* +X59833263Y-72734178D02* +X59833263Y-72591321D01* +X59833263Y-72591321D02* +X59880882Y-72400845D01* +X59880882Y-72400845D02* +X59928501Y-72305607D01* +X59928501Y-72305607D02* +X60023739Y-72210369D01* +X60023739Y-72210369D02* +X60166596Y-72162750D01* +X60166596Y-72162750D02* +X60261834Y-72162750D01* +X60261834Y-72162750D02* +X60404691Y-72210369D01* +X60404691Y-72210369D02* +X60452310Y-72257988D01* +X60642787Y-73257988D02* +X61404691Y-73257988D01* +X61976120Y-72638940D02* +X62118977Y-72686559D01* +X62118977Y-72686559D02* +X62166596Y-72734178D01* +X62166596Y-72734178D02* +X62214215Y-72829416D01* +X62214215Y-72829416D02* +X62214215Y-72972273D01* +X62214215Y-72972273D02* +X62166596Y-73067511D01* +X62166596Y-73067511D02* +X62118977Y-73115131D01* +X62118977Y-73115131D02* +X62023739Y-73162750D01* +X62023739Y-73162750D02* +X61642787Y-73162750D01* +X61642787Y-73162750D02* +X61642787Y-72162750D01* +X61642787Y-72162750D02* +X61976120Y-72162750D01* +X61976120Y-72162750D02* +X62071358Y-72210369D01* +X62071358Y-72210369D02* +X62118977Y-72257988D01* +X62118977Y-72257988D02* +X62166596Y-72353226D01* +X62166596Y-72353226D02* +X62166596Y-72448464D01* +X62166596Y-72448464D02* +X62118977Y-72543702D01* +X62118977Y-72543702D02* +X62071358Y-72591321D01* +X62071358Y-72591321D02* +X61976120Y-72638940D01* +X61976120Y-72638940D02* +X61642787Y-72638940D01* +X62595168Y-72257988D02* +X62642787Y-72210369D01* +X62642787Y-72210369D02* +X62738025Y-72162750D01* +X62738025Y-72162750D02* +X62976120Y-72162750D01* +X62976120Y-72162750D02* +X63071358Y-72210369D01* +X63071358Y-72210369D02* +X63118977Y-72257988D01* +X63118977Y-72257988D02* +X63166596Y-72353226D01* +X63166596Y-72353226D02* +X63166596Y-72448464D01* +X63166596Y-72448464D02* +X63118977Y-72591321D01* +X63118977Y-72591321D02* +X62547549Y-73162750D01* +X62547549Y-73162750D02* +X63166596Y-73162750D01* +X63849929Y-73115131D02* +X63992786Y-73162750D01* +X63992786Y-73162750D02* +X64230881Y-73162750D01* +X64230881Y-73162750D02* +X64326119Y-73115131D01* +X64326119Y-73115131D02* +X64373738Y-73067511D01* +X64373738Y-73067511D02* +X64421357Y-72972273D01* +X64421357Y-72972273D02* +X64421357Y-72877035D01* +X64421357Y-72877035D02* +X64373738Y-72781797D01* +X64373738Y-72781797D02* +X64326119Y-72734178D01* +X64326119Y-72734178D02* +X64230881Y-72686559D01* +X64230881Y-72686559D02* +X64040405Y-72638940D01* +X64040405Y-72638940D02* +X63945167Y-72591321D01* +X63945167Y-72591321D02* +X63897548Y-72543702D01* +X63897548Y-72543702D02* +X63849929Y-72448464D01* +X63849929Y-72448464D02* +X63849929Y-72353226D01* +X63849929Y-72353226D02* +X63897548Y-72257988D01* +X63897548Y-72257988D02* +X63945167Y-72210369D01* +X63945167Y-72210369D02* +X64040405Y-72162750D01* +X64040405Y-72162750D02* +X64278500Y-72162750D01* +X64278500Y-72162750D02* +X64421357Y-72210369D01* +X65373738Y-72210369D02* +X65278500Y-72162750D01* +X65278500Y-72162750D02* +X65135643Y-72162750D01* +X65135643Y-72162750D02* +X64992786Y-72210369D01* +X64992786Y-72210369D02* +X64897548Y-72305607D01* +X64897548Y-72305607D02* +X64849929Y-72400845D01* +X64849929Y-72400845D02* +X64802310Y-72591321D01* +X64802310Y-72591321D02* +X64802310Y-72734178D01* +X64802310Y-72734178D02* +X64849929Y-72924654D01* +X64849929Y-72924654D02* +X64897548Y-73019892D01* +X64897548Y-73019892D02* +X64992786Y-73115131D01* +X64992786Y-73115131D02* +X65135643Y-73162750D01* +X65135643Y-73162750D02* +X65230881Y-73162750D01* +X65230881Y-73162750D02* +X65373738Y-73115131D01* +X65373738Y-73115131D02* +X65421357Y-73067511D01* +X65421357Y-73067511D02* +X65421357Y-72734178D01* +X65421357Y-72734178D02* +X65230881Y-72734178D01* +X65849929Y-73162750D02* +X65849929Y-72162750D01* +X65849929Y-72162750D02* +X66421357Y-73162750D01* +X66421357Y-73162750D02* +X66421357Y-72162750D01* +X67373738Y-73162750D02* +X66897548Y-73162750D01* +X66897548Y-73162750D02* +X66897548Y-72162750D01* +X67468977Y-73257988D02* +X68230881Y-73257988D01* +X68802310Y-72638940D02* +X68945167Y-72686559D01* +X68945167Y-72686559D02* +X68992786Y-72734178D01* +X68992786Y-72734178D02* +X69040405Y-72829416D01* +X69040405Y-72829416D02* +X69040405Y-72972273D01* +X69040405Y-72972273D02* +X68992786Y-73067511D01* +X68992786Y-73067511D02* +X68945167Y-73115131D01* +X68945167Y-73115131D02* +X68849929Y-73162750D01* +X68849929Y-73162750D02* +X68468977Y-73162750D01* +X68468977Y-73162750D02* +X68468977Y-72162750D01* +X68468977Y-72162750D02* +X68802310Y-72162750D01* +X68802310Y-72162750D02* +X68897548Y-72210369D01* +X68897548Y-72210369D02* +X68945167Y-72257988D01* +X68945167Y-72257988D02* +X68992786Y-72353226D01* +X68992786Y-72353226D02* +X68992786Y-72448464D01* +X68992786Y-72448464D02* +X68945167Y-72543702D01* +X68945167Y-72543702D02* +X68897548Y-72591321D01* +X68897548Y-72591321D02* +X68802310Y-72638940D01* +X68802310Y-72638940D02* +X68468977Y-72638940D01* +X69992786Y-73162750D02* +X69421358Y-73162750D01* +X69707072Y-73162750D02* +X69707072Y-72162750D01* +X69707072Y-72162750D02* +X69611834Y-72305607D01* +X69611834Y-72305607D02* +X69516596Y-72400845D01* +X69516596Y-72400845D02* +X69421358Y-72448464D01* +X62976190Y-155050057D02* +X63023809Y-155002438D01* +X63023809Y-155002438D02* +X63119047Y-154954819D01* +X63119047Y-154954819D02* +X63357142Y-154954819D01* +X63357142Y-154954819D02* +X63452380Y-155002438D01* +X63452380Y-155002438D02* +X63499999Y-155050057D01* +X63499999Y-155050057D02* +X63547618Y-155145295D01* +X63547618Y-155145295D02* +X63547618Y-155240533D01* +X63547618Y-155240533D02* +X63499999Y-155383390D01* +X63499999Y-155383390D02* +X62928571Y-155954819D01* +X62928571Y-155954819D02* +X63547618Y-155954819D01* +X64166666Y-154954819D02* +X64261904Y-154954819D01* +X64261904Y-154954819D02* +X64357142Y-155002438D01* +X64357142Y-155002438D02* +X64404761Y-155050057D01* +X64404761Y-155050057D02* +X64452380Y-155145295D01* +X64452380Y-155145295D02* +X64499999Y-155335771D01* +X64499999Y-155335771D02* +X64499999Y-155573866D01* +X64499999Y-155573866D02* +X64452380Y-155764342D01* +X64452380Y-155764342D02* +X64404761Y-155859580D01* +X64404761Y-155859580D02* +X64357142Y-155907200D01* +X64357142Y-155907200D02* +X64261904Y-155954819D01* +X64261904Y-155954819D02* +X64166666Y-155954819D01* +X64166666Y-155954819D02* +X64071428Y-155907200D01* +X64071428Y-155907200D02* +X64023809Y-155859580D01* +X64023809Y-155859580D02* +X63976190Y-155764342D01* +X63976190Y-155764342D02* +X63928571Y-155573866D01* +X63928571Y-155573866D02* +X63928571Y-155335771D01* +X63928571Y-155335771D02* +X63976190Y-155145295D01* +X63976190Y-155145295D02* +X64023809Y-155050057D01* +X64023809Y-155050057D02* +X64071428Y-155002438D01* +X64071428Y-155002438D02* +X64166666Y-154954819D01* +X64880952Y-155050057D02* +X64928571Y-155002438D01* +X64928571Y-155002438D02* +X65023809Y-154954819D01* +X65023809Y-154954819D02* +X65261904Y-154954819D01* +X65261904Y-154954819D02* +X65357142Y-155002438D01* +X65357142Y-155002438D02* +X65404761Y-155050057D01* +X65404761Y-155050057D02* +X65452380Y-155145295D01* +X65452380Y-155145295D02* +X65452380Y-155240533D01* +X65452380Y-155240533D02* +X65404761Y-155383390D01* +X65404761Y-155383390D02* +X64833333Y-155954819D01* +X64833333Y-155954819D02* +X65452380Y-155954819D01* +X66309523Y-154954819D02* +X66119047Y-154954819D01* +X66119047Y-154954819D02* +X66023809Y-155002438D01* +X66023809Y-155002438D02* +X65976190Y-155050057D01* +X65976190Y-155050057D02* +X65880952Y-155192914D01* +X65880952Y-155192914D02* +X65833333Y-155383390D01* +X65833333Y-155383390D02* +X65833333Y-155764342D01* +X65833333Y-155764342D02* +X65880952Y-155859580D01* +X65880952Y-155859580D02* +X65928571Y-155907200D01* +X65928571Y-155907200D02* +X66023809Y-155954819D01* +X66023809Y-155954819D02* +X66214285Y-155954819D01* +X66214285Y-155954819D02* +X66309523Y-155907200D01* +X66309523Y-155907200D02* +X66357142Y-155859580D01* +X66357142Y-155859580D02* +X66404761Y-155764342D01* +X66404761Y-155764342D02* +X66404761Y-155526247D01* +X66404761Y-155526247D02* +X66357142Y-155431009D01* +X66357142Y-155431009D02* +X66309523Y-155383390D01* +X66309523Y-155383390D02* +X66214285Y-155335771D01* +X66214285Y-155335771D02* +X66023809Y-155335771D01* +X66023809Y-155335771D02* +X65928571Y-155383390D01* +X65928571Y-155383390D02* +X65880952Y-155431009D01* +X65880952Y-155431009D02* +X65833333Y-155526247D01* +X66833333Y-155573866D02* +X67595238Y-155573866D01* +X68261904Y-154954819D02* +X68357142Y-154954819D01* +X68357142Y-154954819D02* +X68452380Y-155002438D01* +X68452380Y-155002438D02* +X68499999Y-155050057D01* +X68499999Y-155050057D02* +X68547618Y-155145295D01* +X68547618Y-155145295D02* +X68595237Y-155335771D01* +X68595237Y-155335771D02* +X68595237Y-155573866D01* +X68595237Y-155573866D02* +X68547618Y-155764342D01* +X68547618Y-155764342D02* +X68499999Y-155859580D01* +X68499999Y-155859580D02* +X68452380Y-155907200D01* +X68452380Y-155907200D02* +X68357142Y-155954819D01* +X68357142Y-155954819D02* +X68261904Y-155954819D01* +X68261904Y-155954819D02* +X68166666Y-155907200D01* +X68166666Y-155907200D02* +X68119047Y-155859580D01* +X68119047Y-155859580D02* +X68071428Y-155764342D01* +X68071428Y-155764342D02* +X68023809Y-155573866D01* +X68023809Y-155573866D02* +X68023809Y-155335771D01* +X68023809Y-155335771D02* +X68071428Y-155145295D01* +X68071428Y-155145295D02* +X68119047Y-155050057D01* +X68119047Y-155050057D02* +X68166666Y-155002438D01* +X68166666Y-155002438D02* +X68261904Y-154954819D01* +X69452380Y-155288152D02* +X69452380Y-155954819D01* +X69214285Y-154907200D02* +X68976190Y-155621485D01* +X68976190Y-155621485D02* +X69595237Y-155621485D01* +X71166666Y-155954819D02* +X71166666Y-154954819D01* +X71166666Y-155907200D02* +X71071428Y-155954819D01* +X71071428Y-155954819D02* +X70880952Y-155954819D01* +X70880952Y-155954819D02* +X70785714Y-155907200D01* +X70785714Y-155907200D02* +X70738095Y-155859580D01* +X70738095Y-155859580D02* +X70690476Y-155764342D01* +X70690476Y-155764342D02* +X70690476Y-155478628D01* +X70690476Y-155478628D02* +X70738095Y-155383390D01* +X70738095Y-155383390D02* +X70785714Y-155335771D01* +X70785714Y-155335771D02* +X70880952Y-155288152D01* +X70880952Y-155288152D02* +X71071428Y-155288152D01* +X71071428Y-155288152D02* +X71166666Y-155335771D01* +X72071428Y-155288152D02* +X72071428Y-155954819D01* +X71642857Y-155288152D02* +X71642857Y-155811961D01* +X71642857Y-155811961D02* +X71690476Y-155907200D01* +X71690476Y-155907200D02* +X71785714Y-155954819D01* +X71785714Y-155954819D02* +X71928571Y-155954819D01* +X71928571Y-155954819D02* +X72023809Y-155907200D01* +X72023809Y-155907200D02* +X72071428Y-155859580D01* +X72976190Y-155954819D02* +X72976190Y-155431009D01* +X72976190Y-155431009D02* +X72928571Y-155335771D01* +X72928571Y-155335771D02* +X72833333Y-155288152D01* +X72833333Y-155288152D02* +X72642857Y-155288152D01* +X72642857Y-155288152D02* +X72547619Y-155335771D01* +X72976190Y-155907200D02* +X72880952Y-155954819D01* +X72880952Y-155954819D02* +X72642857Y-155954819D01* +X72642857Y-155954819D02* +X72547619Y-155907200D01* +X72547619Y-155907200D02* +X72500000Y-155811961D01* +X72500000Y-155811961D02* +X72500000Y-155716723D01* +X72500000Y-155716723D02* +X72547619Y-155621485D01* +X72547619Y-155621485D02* +X72642857Y-155573866D01* +X72642857Y-155573866D02* +X72880952Y-155573866D01* +X72880952Y-155573866D02* +X72976190Y-155526247D01* +X73595238Y-155954819D02* +X73500000Y-155907200D01* +X73500000Y-155907200D02* +X73452381Y-155811961D01* +X73452381Y-155811961D02* +X73452381Y-154954819D01* +X74928572Y-154954819D02* +X75119048Y-154954819D01* +X75119048Y-154954819D02* +X75214286Y-155002438D01* +X75214286Y-155002438D02* +X75309524Y-155097676D01* +X75309524Y-155097676D02* +X75357143Y-155288152D01* +X75357143Y-155288152D02* +X75357143Y-155621485D01* +X75357143Y-155621485D02* +X75309524Y-155811961D01* +X75309524Y-155811961D02* +X75214286Y-155907200D01* +X75214286Y-155907200D02* +X75119048Y-155954819D01* +X75119048Y-155954819D02* +X74928572Y-155954819D01* +X74928572Y-155954819D02* +X74833334Y-155907200D01* +X74833334Y-155907200D02* +X74738096Y-155811961D01* +X74738096Y-155811961D02* +X74690477Y-155621485D01* +X74690477Y-155621485D02* +X74690477Y-155288152D01* +X74690477Y-155288152D02* +X74738096Y-155097676D01* +X74738096Y-155097676D02* +X74833334Y-155002438D01* +X74833334Y-155002438D02* +X74928572Y-154954819D01* +X75785715Y-155954819D02* +X75785715Y-154954819D01* +X75785715Y-154954819D02* +X76166667Y-154954819D01* +X76166667Y-154954819D02* +X76261905Y-155002438D01* +X76261905Y-155002438D02* +X76309524Y-155050057D01* +X76309524Y-155050057D02* +X76357143Y-155145295D01* +X76357143Y-155145295D02* +X76357143Y-155288152D01* +X76357143Y-155288152D02* +X76309524Y-155383390D01* +X76309524Y-155383390D02* +X76261905Y-155431009D01* +X76261905Y-155431009D02* +X76166667Y-155478628D01* +X76166667Y-155478628D02* +X75785715Y-155478628D01* +X76738096Y-155669104D02* +X77214286Y-155669104D01* +X76642858Y-155954819D02* +X76976191Y-154954819D01* +X76976191Y-154954819D02* +X77309524Y-155954819D01* +X78166667Y-155954819D02* +X77595239Y-155954819D01* +X77880953Y-155954819D02* +X77880953Y-154954819D01* +X77880953Y-154954819D02* +X77785715Y-155097676D01* +X77785715Y-155097676D02* +X77690477Y-155192914D01* +X77690477Y-155192914D02* +X77595239Y-155240533D01* +X79023810Y-154954819D02* +X78833334Y-154954819D01* +X78833334Y-154954819D02* +X78738096Y-155002438D01* +X78738096Y-155002438D02* +X78690477Y-155050057D01* +X78690477Y-155050057D02* +X78595239Y-155192914D01* +X78595239Y-155192914D02* +X78547620Y-155383390D01* +X78547620Y-155383390D02* +X78547620Y-155764342D01* +X78547620Y-155764342D02* +X78595239Y-155859580D01* +X78595239Y-155859580D02* +X78642858Y-155907200D01* +X78642858Y-155907200D02* +X78738096Y-155954819D01* +X78738096Y-155954819D02* +X78928572Y-155954819D01* +X78928572Y-155954819D02* +X79023810Y-155907200D01* +X79023810Y-155907200D02* +X79071429Y-155859580D01* +X79071429Y-155859580D02* +X79119048Y-155764342D01* +X79119048Y-155764342D02* +X79119048Y-155526247D01* +X79119048Y-155526247D02* +X79071429Y-155431009D01* +X79071429Y-155431009D02* +X79023810Y-155383390D01* +X79023810Y-155383390D02* +X78928572Y-155335771D01* +X78928572Y-155335771D02* +X78738096Y-155335771D01* +X78738096Y-155335771D02* +X78642858Y-155383390D01* +X78642858Y-155383390D02* +X78595239Y-155431009D01* +X78595239Y-155431009D02* +X78547620Y-155526247D01* +X79976191Y-155288152D02* +X79976191Y-155954819D01* +X79738096Y-154907200D02* +X79500001Y-155621485D01* +X79500001Y-155621485D02* +X80119048Y-155621485D01* +X80452382Y-155050057D02* +X80500001Y-155002438D01* +X80500001Y-155002438D02* +X80595239Y-154954819D01* +X80595239Y-154954819D02* +X80833334Y-154954819D01* +X80833334Y-154954819D02* +X80928572Y-155002438D01* +X80928572Y-155002438D02* +X80976191Y-155050057D01* +X80976191Y-155050057D02* +X81023810Y-155145295D01* +X81023810Y-155145295D02* +X81023810Y-155240533D01* +X81023810Y-155240533D02* +X80976191Y-155383390D01* +X80976191Y-155383390D02* +X80404763Y-155954819D01* +X80404763Y-155954819D02* +X81023810Y-155954819D01* +X74081358Y-73115131D02* +X74224215Y-73162750D01* +X74224215Y-73162750D02* +X74462310Y-73162750D01* +X74462310Y-73162750D02* +X74557548Y-73115131D01* +X74557548Y-73115131D02* +X74605167Y-73067511D01* +X74605167Y-73067511D02* +X74652786Y-72972273D01* +X74652786Y-72972273D02* +X74652786Y-72877035D01* +X74652786Y-72877035D02* +X74605167Y-72781797D01* +X74605167Y-72781797D02* +X74557548Y-72734178D01* +X74557548Y-72734178D02* +X74462310Y-72686559D01* +X74462310Y-72686559D02* +X74271834Y-72638940D01* +X74271834Y-72638940D02* +X74176596Y-72591321D01* +X74176596Y-72591321D02* +X74128977Y-72543702D01* +X74128977Y-72543702D02* +X74081358Y-72448464D01* +X74081358Y-72448464D02* +X74081358Y-72353226D01* +X74081358Y-72353226D02* +X74128977Y-72257988D01* +X74128977Y-72257988D02* +X74176596Y-72210369D01* +X74176596Y-72210369D02* +X74271834Y-72162750D01* +X74271834Y-72162750D02* +X74509929Y-72162750D01* +X74509929Y-72162750D02* +X74652786Y-72210369D01* +X75605167Y-72210369D02* +X75509929Y-72162750D01* +X75509929Y-72162750D02* +X75367072Y-72162750D01* +X75367072Y-72162750D02* +X75224215Y-72210369D01* +X75224215Y-72210369D02* +X75128977Y-72305607D01* +X75128977Y-72305607D02* +X75081358Y-72400845D01* +X75081358Y-72400845D02* +X75033739Y-72591321D01* +X75033739Y-72591321D02* +X75033739Y-72734178D01* +X75033739Y-72734178D02* +X75081358Y-72924654D01* +X75081358Y-72924654D02* +X75128977Y-73019892D01* +X75128977Y-73019892D02* +X75224215Y-73115131D01* +X75224215Y-73115131D02* +X75367072Y-73162750D01* +X75367072Y-73162750D02* +X75462310Y-73162750D01* +X75462310Y-73162750D02* +X75605167Y-73115131D01* +X75605167Y-73115131D02* +X75652786Y-73067511D01* +X75652786Y-73067511D02* +X75652786Y-72734178D01* +X75652786Y-72734178D02* +X75462310Y-72734178D01* +X76081358Y-73162750D02* +X76081358Y-72162750D01* +X76081358Y-72162750D02* +X76652786Y-73162750D01* +X76652786Y-73162750D02* +X76652786Y-72162750D01* +X77605167Y-73162750D02* +X77128977Y-73162750D01* +X77128977Y-73162750D02* +X77128977Y-72162750D01* +X77700406Y-73257988D02* +X78462310Y-73257988D01* +X78652787Y-72877035D02* +X79128977Y-72877035D01* +X78557549Y-73162750D02* +X78890882Y-72162750D01* +X78890882Y-72162750D02* +X79224215Y-73162750D01* +X80081358Y-73162750D02* +X79509930Y-73162750D01* +X79795644Y-73162750D02* +X79795644Y-72162750D01* +X79795644Y-72162750D02* +X79700406Y-72305607D01* +X79700406Y-72305607D02* +X79605168Y-72400845D01* +X79605168Y-72400845D02* +X79509930Y-72448464D01* +X80812310Y-72162750D02* +X81145643Y-73162750D01* +X81145643Y-73162750D02* +X81478976Y-72162750D01* +X82383738Y-73067511D02* +X82336119Y-73115131D01* +X82336119Y-73115131D02* +X82193262Y-73162750D01* +X82193262Y-73162750D02* +X82098024Y-73162750D01* +X82098024Y-73162750D02* +X81955167Y-73115131D01* +X81955167Y-73115131D02* +X81859929Y-73019892D01* +X81859929Y-73019892D02* +X81812310Y-72924654D01* +X81812310Y-72924654D02* +X81764691Y-72734178D01* +X81764691Y-72734178D02* +X81764691Y-72591321D01* +X81764691Y-72591321D02* +X81812310Y-72400845D01* +X81812310Y-72400845D02* +X81859929Y-72305607D01* +X81859929Y-72305607D02* +X81955167Y-72210369D01* +X81955167Y-72210369D02* +X82098024Y-72162750D01* +X82098024Y-72162750D02* +X82193262Y-72162750D01* +X82193262Y-72162750D02* +X82336119Y-72210369D01* +X82336119Y-72210369D02* +X82383738Y-72257988D01* +X83383738Y-73067511D02* +X83336119Y-73115131D01* +X83336119Y-73115131D02* +X83193262Y-73162750D01* +X83193262Y-73162750D02* +X83098024Y-73162750D01* +X83098024Y-73162750D02* +X82955167Y-73115131D01* +X82955167Y-73115131D02* +X82859929Y-73019892D01* +X82859929Y-73019892D02* +X82812310Y-72924654D01* +X82812310Y-72924654D02* +X82764691Y-72734178D01* +X82764691Y-72734178D02* +X82764691Y-72591321D01* +X82764691Y-72591321D02* +X82812310Y-72400845D01* +X82812310Y-72400845D02* +X82859929Y-72305607D01* +X82859929Y-72305607D02* +X82955167Y-72210369D01* +X82955167Y-72210369D02* +X83098024Y-72162750D01* +X83098024Y-72162750D02* +X83193262Y-72162750D01* +X83193262Y-72162750D02* +X83336119Y-72210369D01* +X83336119Y-72210369D02* +X83383738Y-72257988D01* +X83574215Y-73257988D02* +X84336119Y-73257988D01* +X84526596Y-72877035D02* +X85002786Y-72877035D01* +X84431358Y-73162750D02* +X84764691Y-72162750D01* +X84764691Y-72162750D02* +X85098024Y-73162750D01* +X85383739Y-72257988D02* +X85431358Y-72210369D01* +X85431358Y-72210369D02* +X85526596Y-72162750D01* +X85526596Y-72162750D02* +X85764691Y-72162750D01* +X85764691Y-72162750D02* +X85859929Y-72210369D01* +X85859929Y-72210369D02* +X85907548Y-72257988D01* +X85907548Y-72257988D02* +X85955167Y-72353226D01* +X85955167Y-72353226D02* +X85955167Y-72448464D01* +X85955167Y-72448464D02* +X85907548Y-72591321D01* +X85907548Y-72591321D02* +X85336120Y-73162750D01* +X85336120Y-73162750D02* +X85955167Y-73162750D01* +X87733738Y-72210369D02* +X87638500Y-72162750D01* +X87638500Y-72162750D02* +X87495643Y-72162750D01* +X87495643Y-72162750D02* +X87352786Y-72210369D01* +X87352786Y-72210369D02* +X87257548Y-72305607D01* +X87257548Y-72305607D02* +X87209929Y-72400845D01* +X87209929Y-72400845D02* +X87162310Y-72591321D01* +X87162310Y-72591321D02* +X87162310Y-72734178D01* +X87162310Y-72734178D02* +X87209929Y-72924654D01* +X87209929Y-72924654D02* +X87257548Y-73019892D01* +X87257548Y-73019892D02* +X87352786Y-73115131D01* +X87352786Y-73115131D02* +X87495643Y-73162750D01* +X87495643Y-73162750D02* +X87590881Y-73162750D01* +X87590881Y-73162750D02* +X87733738Y-73115131D01* +X87733738Y-73115131D02* +X87781357Y-73067511D01* +X87781357Y-73067511D02* +X87781357Y-72734178D01* +X87781357Y-72734178D02* +X87590881Y-72734178D01* +X88209929Y-73162750D02* +X88209929Y-72162750D01* +X88209929Y-72162750D02* +X88781357Y-73162750D01* +X88781357Y-73162750D02* +X88781357Y-72162750D01* +X89257548Y-73162750D02* +X89257548Y-72162750D01* +X89257548Y-72162750D02* +X89495643Y-72162750D01* +X89495643Y-72162750D02* +X89638500Y-72210369D01* +X89638500Y-72210369D02* +X89733738Y-72305607D01* +X89733738Y-72305607D02* +X89781357Y-72400845D01* +X89781357Y-72400845D02* +X89828976Y-72591321D01* +X89828976Y-72591321D02* +X89828976Y-72734178D01* +X89828976Y-72734178D02* +X89781357Y-72924654D01* +X89781357Y-72924654D02* +X89733738Y-73019892D01* +X89733738Y-73019892D02* +X89638500Y-73115131D01* +X89638500Y-73115131D02* +X89495643Y-73162750D01* +X89495643Y-73162750D02* +X89257548Y-73162750D01* +X90019453Y-73257988D02* +X90781357Y-73257988D01* +X90971834Y-72877035D02* +X91448024Y-72877035D01* +X90876596Y-73162750D02* +X91209929Y-72162750D01* +X91209929Y-72162750D02* +X91543262Y-73162750D01* +X92400405Y-73162750D02* +X91828977Y-73162750D01* +X92114691Y-73162750D02* +X92114691Y-72162750D01* +X92114691Y-72162750D02* +X92019453Y-72305607D01* +X92019453Y-72305607D02* +X91924215Y-72400845D01* +X91924215Y-72400845D02* +X91828977Y-72448464D01* +X61685714Y-74347342D02* +X62371429Y-74347342D01* +X62028571Y-75547342D02* +X62028571Y-74347342D01* +X62714286Y-75204485D02* +X63285715Y-75204485D01* +X62600000Y-75547342D02* +X63000000Y-74347342D01* +X63000000Y-74347342D02* +X63400000Y-75547342D01* +X64371428Y-75547342D02* +X63800000Y-75547342D01* +X63800000Y-75547342D02* +X63800000Y-74347342D01* +X64714286Y-75204485D02* +X65285715Y-75204485D01* +X64600000Y-75547342D02* +X65000000Y-74347342D01* +X65000000Y-74347342D02* +X65400000Y-75547342D01* +X65742857Y-75490200D02* +X65914286Y-75547342D01* +X65914286Y-75547342D02* +X66200000Y-75547342D01* +X66200000Y-75547342D02* +X66314286Y-75490200D01* +X66314286Y-75490200D02* +X66371428Y-75433057D01* +X66371428Y-75433057D02* +X66428571Y-75318771D01* +X66428571Y-75318771D02* +X66428571Y-75204485D01* +X66428571Y-75204485D02* +X66371428Y-75090200D01* +X66371428Y-75090200D02* +X66314286Y-75033057D01* +X66314286Y-75033057D02* +X66200000Y-74975914D01* +X66200000Y-74975914D02* +X65971428Y-74918771D01* +X65971428Y-74918771D02* +X65857143Y-74861628D01* +X65857143Y-74861628D02* +X65800000Y-74804485D01* +X65800000Y-74804485D02* +X65742857Y-74690200D01* +X65742857Y-74690200D02* +X65742857Y-74575914D01* +X65742857Y-74575914D02* +X65800000Y-74461628D01* +X65800000Y-74461628D02* +X65857143Y-74404485D01* +X65857143Y-74404485D02* +X65971428Y-74347342D01* +X65971428Y-74347342D02* +X66257143Y-74347342D01* +X66257143Y-74347342D02* +X66428571Y-74404485D01* +X68085714Y-74347342D02* +X68314286Y-74347342D01* +X68314286Y-74347342D02* +X68428571Y-74404485D01* +X68428571Y-74404485D02* +X68542857Y-74518771D01* +X68542857Y-74518771D02* +X68600000Y-74747342D01* +X68600000Y-74747342D02* +X68600000Y-75147342D01* +X68600000Y-75147342D02* +X68542857Y-75375914D01* +X68542857Y-75375914D02* +X68428571Y-75490200D01* +X68428571Y-75490200D02* +X68314286Y-75547342D01* +X68314286Y-75547342D02* +X68085714Y-75547342D01* +X68085714Y-75547342D02* +X67971429Y-75490200D01* +X67971429Y-75490200D02* +X67857143Y-75375914D01* +X67857143Y-75375914D02* +X67800000Y-75147342D01* +X67800000Y-75147342D02* +X67800000Y-74747342D01* +X67800000Y-74747342D02* +X67857143Y-74518771D01* +X67857143Y-74518771D02* +X67971429Y-74404485D01* +X67971429Y-74404485D02* +X68085714Y-74347342D01* +X69114286Y-75547342D02* +X69114286Y-74347342D01* +X69114286Y-74347342D02* +X69800000Y-75547342D01* +X69800000Y-75547342D02* +X69800000Y-74347342D01* +X70371429Y-74918771D02* +X70771429Y-74918771D01* +X70942857Y-75547342D02* +X70371429Y-75547342D01* +X70371429Y-75547342D02* +X70371429Y-74347342D01* +X70371429Y-74347342D02* +X70942857Y-74347342D01* +X72371429Y-75547342D02* +X72371429Y-74347342D01* +X72371429Y-74347342D02* +X72828572Y-74347342D01* +X72828572Y-74347342D02* +X72942857Y-74404485D01* +X72942857Y-74404485D02* +X73000000Y-74461628D01* +X73000000Y-74461628D02* +X73057143Y-74575914D01* +X73057143Y-74575914D02* +X73057143Y-74747342D01* +X73057143Y-74747342D02* +X73000000Y-74861628D01* +X73000000Y-74861628D02* +X72942857Y-74918771D01* +X72942857Y-74918771D02* +X72828572Y-74975914D01* +X72828572Y-74975914D02* +X72371429Y-74975914D01* +X74257143Y-75547342D02* +X73857143Y-74975914D01* +X73571429Y-75547342D02* +X73571429Y-74347342D01* +X73571429Y-74347342D02* +X74028572Y-74347342D01* +X74028572Y-74347342D02* +X74142857Y-74404485D01* +X74142857Y-74404485D02* +X74200000Y-74461628D01* +X74200000Y-74461628D02* +X74257143Y-74575914D01* +X74257143Y-74575914D02* +X74257143Y-74747342D01* +X74257143Y-74747342D02* +X74200000Y-74861628D01* +X74200000Y-74861628D02* +X74142857Y-74918771D01* +X74142857Y-74918771D02* +X74028572Y-74975914D01* +X74028572Y-74975914D02* +X73571429Y-74975914D01* +X74771429Y-74918771D02* +X75171429Y-74918771D01* +X75342857Y-75547342D02* +X74771429Y-75547342D01* +X74771429Y-75547342D02* +X74771429Y-74347342D01* +X74771429Y-74347342D02* +X75342857Y-74347342D01* +X75800000Y-75204485D02* +X76371429Y-75204485D01* +X75685714Y-75547342D02* +X76085714Y-74347342D01* +X76085714Y-74347342D02* +X76485714Y-75547342D01* +X76885714Y-75547342D02* +X76885714Y-74347342D01* +X76885714Y-74347342D02* +X77285714Y-75204485D01* +X77285714Y-75204485D02* +X77685714Y-74347342D01* +X77685714Y-74347342D02* +X77685714Y-75547342D01* +X78257143Y-75547342D02* +X78257143Y-74347342D01* +X78257143Y-74347342D02* +X78714286Y-74347342D01* +X78714286Y-74347342D02* +X78828571Y-74404485D01* +X78828571Y-74404485D02* +X78885714Y-74461628D01* +X78885714Y-74461628D02* +X78942857Y-74575914D01* +X78942857Y-74575914D02* +X78942857Y-74747342D01* +X78942857Y-74747342D02* +X78885714Y-74861628D01* +X78885714Y-74861628D02* +X78828571Y-74918771D01* +X78828571Y-74918771D02* +X78714286Y-74975914D01* +X78714286Y-74975914D02* +X78257143Y-74975914D01* +X80371429Y-75547342D02* +X80371429Y-74347342D01* +X80371429Y-74347342D02* +X80828572Y-74347342D01* +X80828572Y-74347342D02* +X80942857Y-74404485D01* +X80942857Y-74404485D02* +X81000000Y-74461628D01* +X81000000Y-74461628D02* +X81057143Y-74575914D01* +X81057143Y-74575914D02* +X81057143Y-74747342D01* +X81057143Y-74747342D02* +X81000000Y-74861628D01* +X81000000Y-74861628D02* +X80942857Y-74918771D01* +X80942857Y-74918771D02* +X80828572Y-74975914D01* +X80828572Y-74975914D02* +X80371429Y-74975914D01* +X81514286Y-74461628D02* +X81571429Y-74404485D01* +X81571429Y-74404485D02* +X81685715Y-74347342D01* +X81685715Y-74347342D02* +X81971429Y-74347342D01* +X81971429Y-74347342D02* +X82085715Y-74404485D01* +X82085715Y-74404485D02* +X82142857Y-74461628D01* +X82142857Y-74461628D02* +X82200000Y-74575914D01* +X82200000Y-74575914D02* +X82200000Y-74690200D01* +X82200000Y-74690200D02* +X82142857Y-74861628D01* +X82142857Y-74861628D02* +X81457143Y-75547342D01* +X81457143Y-75547342D02* +X82200000Y-75547342D01* +X61196396Y-91032781D02* +X61148777Y-91080401D01* +X61148777Y-91080401D02* +X61005920Y-91128020D01* +X61005920Y-91128020D02* +X60910682Y-91128020D01* +X60910682Y-91128020D02* +X60767825Y-91080401D01* +X60767825Y-91080401D02* +X60672587Y-90985162D01* +X60672587Y-90985162D02* +X60624968Y-90889924D01* +X60624968Y-90889924D02* +X60577349Y-90699448D01* +X60577349Y-90699448D02* +X60577349Y-90556591D01* +X60577349Y-90556591D02* +X60624968Y-90366115D01* +X60624968Y-90366115D02* +X60672587Y-90270877D01* +X60672587Y-90270877D02* +X60767825Y-90175639D01* +X60767825Y-90175639D02* +X60910682Y-90128020D01* +X60910682Y-90128020D02* +X61005920Y-90128020D01* +X61005920Y-90128020D02* +X61148777Y-90175639D01* +X61148777Y-90175639D02* +X61196396Y-90223258D01* +X62148777Y-91128020D02* +X61577349Y-91128020D01* +X61863063Y-91128020D02* +X61863063Y-90128020D01* +X61863063Y-90128020D02* +X61767825Y-90270877D01* +X61767825Y-90270877D02* +X61672587Y-90366115D01* +X61672587Y-90366115D02* +X61577349Y-90413734D01* +X62482111Y-90128020D02* +X63101158Y-90128020D01* +X63101158Y-90128020D02* +X62767825Y-90508972D01* +X62767825Y-90508972D02* +X62910682Y-90508972D01* +X62910682Y-90508972D02* +X63005920Y-90556591D01* +X63005920Y-90556591D02* +X63053539Y-90604210D01* +X63053539Y-90604210D02* +X63101158Y-90699448D01* +X63101158Y-90699448D02* +X63101158Y-90937543D01* +X63101158Y-90937543D02* +X63053539Y-91032781D01* +X63053539Y-91032781D02* +X63005920Y-91080401D01* +X63005920Y-91080401D02* +X62910682Y-91128020D01* +X62910682Y-91128020D02* +X62624968Y-91128020D01* +X62624968Y-91128020D02* +X62529730Y-91080401D01* +X62529730Y-91080401D02* +X62482111Y-91032781D01* +X64050288Y-99941510D02* +X63716955Y-99465319D01* +X63478860Y-99941510D02* +X63478860Y-98941510D01* +X63478860Y-98941510D02* +X63859812Y-98941510D01* +X63859812Y-98941510D02* +X63955050Y-98989129D01* +X63955050Y-98989129D02* +X64002669Y-99036748D01* +X64002669Y-99036748D02* +X64050288Y-99131986D01* +X64050288Y-99131986D02* +X64050288Y-99274843D01* +X64050288Y-99274843D02* +X64002669Y-99370081D01* +X64002669Y-99370081D02* +X63955050Y-99417700D01* +X63955050Y-99417700D02* +X63859812Y-99465319D01* +X63859812Y-99465319D02* +X63478860Y-99465319D01* +X65002669Y-99941510D02* +X64431241Y-99941510D01* +X64716955Y-99941510D02* +X64716955Y-98941510D01* +X64716955Y-98941510D02* +X64621717Y-99084367D01* +X64621717Y-99084367D02* +X64526479Y-99179605D01* +X64526479Y-99179605D02* +X64431241Y-99227224D01* +X65859812Y-98941510D02* +X65669336Y-98941510D01* +X65669336Y-98941510D02* +X65574098Y-98989129D01* +X65574098Y-98989129D02* +X65526479Y-99036748D01* +X65526479Y-99036748D02* +X65431241Y-99179605D01* +X65431241Y-99179605D02* +X65383622Y-99370081D01* +X65383622Y-99370081D02* +X65383622Y-99751033D01* +X65383622Y-99751033D02* +X65431241Y-99846271D01* +X65431241Y-99846271D02* +X65478860Y-99893891D01* +X65478860Y-99893891D02* +X65574098Y-99941510D01* +X65574098Y-99941510D02* +X65764574Y-99941510D01* +X65764574Y-99941510D02* +X65859812Y-99893891D01* +X65859812Y-99893891D02* +X65907431Y-99846271D01* +X65907431Y-99846271D02* +X65955050Y-99751033D01* +X65955050Y-99751033D02* +X65955050Y-99512938D01* +X65955050Y-99512938D02* +X65907431Y-99417700D01* +X65907431Y-99417700D02* +X65859812Y-99370081D01* +X65859812Y-99370081D02* +X65764574Y-99322462D01* +X65764574Y-99322462D02* +X65574098Y-99322462D01* +X65574098Y-99322462D02* +X65478860Y-99370081D01* +X65478860Y-99370081D02* +X65431241Y-99417700D01* +X65431241Y-99417700D02* +X65383622Y-99512938D01* +D11* +X71290476Y-155117419D02* +X71957142Y-156117419D01* +X71957142Y-155117419D02* +X71290476Y-156117419D01* +X72861904Y-156117419D02* +X72290476Y-156117419D01* +X72576190Y-156117419D02* +X72576190Y-155117419D01* +X72576190Y-155117419D02* +X72480952Y-155260276D01* +X72480952Y-155260276D02* +X72385714Y-155355514D01* +X72385714Y-155355514D02* +X72290476Y-155403133D01* +D10* +X89110366Y-131566552D02* +X88777033Y-131090361D01* +X88538938Y-131566552D02* +X88538938Y-130566552D01* +X88538938Y-130566552D02* +X88919890Y-130566552D01* +X88919890Y-130566552D02* +X89015128Y-130614171D01* +X89015128Y-130614171D02* +X89062747Y-130661790D01* +X89062747Y-130661790D02* +X89110366Y-130757028D01* +X89110366Y-130757028D02* +X89110366Y-130899885D01* +X89110366Y-130899885D02* +X89062747Y-130995123D01* +X89062747Y-130995123D02* +X89015128Y-131042742D01* +X89015128Y-131042742D02* +X88919890Y-131090361D01* +X88919890Y-131090361D02* +X88538938Y-131090361D01* +X90062747Y-131566552D02* +X89491319Y-131566552D01* +X89777033Y-131566552D02* +X89777033Y-130566552D01* +X89777033Y-130566552D02* +X89681795Y-130709409D01* +X89681795Y-130709409D02* +X89586557Y-130804647D01* +X89586557Y-130804647D02* +X89491319Y-130852266D01* +X76753448Y-99948971D02* +X76420115Y-99472780D01* +X76182020Y-99948971D02* +X76182020Y-98948971D01* +X76182020Y-98948971D02* +X76562972Y-98948971D01* +X76562972Y-98948971D02* +X76658210Y-98996590D01* +X76658210Y-98996590D02* +X76705829Y-99044209D01* +X76705829Y-99044209D02* +X76753448Y-99139447D01* +X76753448Y-99139447D02* +X76753448Y-99282304D01* +X76753448Y-99282304D02* +X76705829Y-99377542D01* +X76705829Y-99377542D02* +X76658210Y-99425161D01* +X76658210Y-99425161D02* +X76562972Y-99472780D01* +X76562972Y-99472780D02* +X76182020Y-99472780D01* +X77610591Y-98948971D02* +X77420115Y-98948971D01* +X77420115Y-98948971D02* +X77324877Y-98996590D01* +X77324877Y-98996590D02* +X77277258Y-99044209D01* +X77277258Y-99044209D02* +X77182020Y-99187066D01* +X77182020Y-99187066D02* +X77134401Y-99377542D01* +X77134401Y-99377542D02* +X77134401Y-99758494D01* +X77134401Y-99758494D02* +X77182020Y-99853732D01* +X77182020Y-99853732D02* +X77229639Y-99901352D01* +X77229639Y-99901352D02* +X77324877Y-99948971D01* +X77324877Y-99948971D02* +X77515353Y-99948971D01* +X77515353Y-99948971D02* +X77610591Y-99901352D01* +X77610591Y-99901352D02* +X77658210Y-99853732D01* +X77658210Y-99853732D02* +X77705829Y-99758494D01* +X77705829Y-99758494D02* +X77705829Y-99520399D01* +X77705829Y-99520399D02* +X77658210Y-99425161D01* +X77658210Y-99425161D02* +X77610591Y-99377542D01* +X77610591Y-99377542D02* +X77515353Y-99329923D01* +X77515353Y-99329923D02* +X77324877Y-99329923D01* +X77324877Y-99329923D02* +X77229639Y-99377542D01* +X77229639Y-99377542D02* +X77182020Y-99425161D01* +X77182020Y-99425161D02* +X77134401Y-99520399D01* +X64070806Y-105015096D02* +X63737473Y-104538905D01* +X63499378Y-105015096D02* +X63499378Y-104015096D01* +X63499378Y-104015096D02* +X63880330Y-104015096D01* +X63880330Y-104015096D02* +X63975568Y-104062715D01* +X63975568Y-104062715D02* +X64023187Y-104110334D01* +X64023187Y-104110334D02* +X64070806Y-104205572D01* +X64070806Y-104205572D02* +X64070806Y-104348429D01* +X64070806Y-104348429D02* +X64023187Y-104443667D01* +X64023187Y-104443667D02* +X63975568Y-104491286D01* +X63975568Y-104491286D02* +X63880330Y-104538905D01* +X63880330Y-104538905D02* +X63499378Y-104538905D01* +X65023187Y-105015096D02* +X64451759Y-105015096D01* +X64737473Y-105015096D02* +X64737473Y-104015096D01* +X64737473Y-104015096D02* +X64642235Y-104157953D01* +X64642235Y-104157953D02* +X64546997Y-104253191D01* +X64546997Y-104253191D02* +X64451759Y-104300810D01* +X65499378Y-105015096D02* +X65689854Y-105015096D01* +X65689854Y-105015096D02* +X65785092Y-104967477D01* +X65785092Y-104967477D02* +X65832711Y-104919857D01* +X65832711Y-104919857D02* +X65927949Y-104777000D01* +X65927949Y-104777000D02* +X65975568Y-104586524D01* +X65975568Y-104586524D02* +X65975568Y-104205572D01* +X65975568Y-104205572D02* +X65927949Y-104110334D01* +X65927949Y-104110334D02* +X65880330Y-104062715D01* +X65880330Y-104062715D02* +X65785092Y-104015096D01* +X65785092Y-104015096D02* +X65594616Y-104015096D01* +X65594616Y-104015096D02* +X65499378Y-104062715D01* +X65499378Y-104062715D02* +X65451759Y-104110334D01* +X65451759Y-104110334D02* +X65404140Y-104205572D01* +X65404140Y-104205572D02* +X65404140Y-104443667D01* +X65404140Y-104443667D02* +X65451759Y-104538905D01* +X65451759Y-104538905D02* +X65499378Y-104586524D01* +X65499378Y-104586524D02* +X65594616Y-104634143D01* +X65594616Y-104634143D02* +X65785092Y-104634143D01* +X65785092Y-104634143D02* +X65880330Y-104586524D01* +X65880330Y-104586524D02* +X65927949Y-104538905D01* +X65927949Y-104538905D02* +X65975568Y-104443667D01* +D12* +X67165366Y-114762385D02* +X67104890Y-114822862D01* +X67104890Y-114822862D02* +X66923461Y-114883338D01* +X66923461Y-114883338D02* +X66802509Y-114883338D01* +X66802509Y-114883338D02* +X66621080Y-114822862D01* +X66621080Y-114822862D02* +X66500128Y-114701909D01* +X66500128Y-114701909D02* +X66439651Y-114580957D01* +X66439651Y-114580957D02* +X66379175Y-114339052D01* +X66379175Y-114339052D02* +X66379175Y-114157623D01* +X66379175Y-114157623D02* +X66439651Y-113915719D01* +X66439651Y-113915719D02* +X66500128Y-113794766D01* +X66500128Y-113794766D02* +X66621080Y-113673814D01* +X66621080Y-113673814D02* +X66802509Y-113613338D01* +X66802509Y-113613338D02* +X66923461Y-113613338D01* +X66923461Y-113613338D02* +X67104890Y-113673814D01* +X67104890Y-113673814D02* +X67165366Y-113734290D01* +X68374890Y-114883338D02* +X67649175Y-114883338D01* +X68012032Y-114883338D02* +X68012032Y-113613338D01* +X68012032Y-113613338D02* +X67891080Y-113794766D01* +X67891080Y-113794766D02* +X67770128Y-113915719D01* +X67770128Y-113915719D02* +X67649175Y-113976195D01* +X68858699Y-113734290D02* +X68919175Y-113673814D01* +X68919175Y-113673814D02* +X69040128Y-113613338D01* +X69040128Y-113613338D02* +X69342509Y-113613338D01* +X69342509Y-113613338D02* +X69463461Y-113673814D01* +X69463461Y-113673814D02* +X69523937Y-113734290D01* +X69523937Y-113734290D02* +X69584414Y-113855242D01* +X69584414Y-113855242D02* +X69584414Y-113976195D01* +X69584414Y-113976195D02* +X69523937Y-114157623D01* +X69523937Y-114157623D02* +X68798223Y-114883338D01* +X68798223Y-114883338D02* +X69584414Y-114883338D01* +X64412832Y-138457807D02* +X64352356Y-138518284D01* +X64352356Y-138518284D02* +X64170927Y-138578760D01* +X64170927Y-138578760D02* +X64049975Y-138578760D01* +X64049975Y-138578760D02* +X63868546Y-138518284D01* +X63868546Y-138518284D02* +X63747594Y-138397331D01* +X63747594Y-138397331D02* +X63687117Y-138276379D01* +X63687117Y-138276379D02* +X63626641Y-138034474D01* +X63626641Y-138034474D02* +X63626641Y-137853045D01* +X63626641Y-137853045D02* +X63687117Y-137611141D01* +X63687117Y-137611141D02* +X63747594Y-137490188D01* +X63747594Y-137490188D02* +X63868546Y-137369236D01* +X63868546Y-137369236D02* +X64049975Y-137308760D01* +X64049975Y-137308760D02* +X64170927Y-137308760D01* +X64170927Y-137308760D02* +X64352356Y-137369236D01* +X64352356Y-137369236D02* +X64412832Y-137429712D01* +X65622356Y-138578760D02* +X64896641Y-138578760D01* +X65259498Y-138578760D02* +X65259498Y-137308760D01* +X65259498Y-137308760D02* +X65138546Y-137490188D01* +X65138546Y-137490188D02* +X65017594Y-137611141D01* +X65017594Y-137611141D02* +X64896641Y-137671617D01* +X66831880Y-138578760D02* +X66106165Y-138578760D01* +X66469022Y-138578760D02* +X66469022Y-137308760D01* +X66469022Y-137308760D02* +X66348070Y-137490188D01* +X66348070Y-137490188D02* +X66227118Y-137611141D01* +X66227118Y-137611141D02* +X66106165Y-137671617D01* +D10* +X63729458Y-124020526D02* +X63396125Y-123544335D01* +X63158030Y-124020526D02* +X63158030Y-123020526D01* +X63158030Y-123020526D02* +X63538982Y-123020526D01* +X63538982Y-123020526D02* +X63634220Y-123068145D01* +X63634220Y-123068145D02* +X63681839Y-123115764D01* +X63681839Y-123115764D02* +X63729458Y-123211002D01* +X63729458Y-123211002D02* +X63729458Y-123353859D01* +X63729458Y-123353859D02* +X63681839Y-123449097D01* +X63681839Y-123449097D02* +X63634220Y-123496716D01* +X63634220Y-123496716D02* +X63538982Y-123544335D01* +X63538982Y-123544335D02* +X63158030Y-123544335D01* +X64681839Y-124020526D02* +X64110411Y-124020526D01* +X64396125Y-124020526D02* +X64396125Y-123020526D01* +X64396125Y-123020526D02* +X64300887Y-123163383D01* +X64300887Y-123163383D02* +X64205649Y-123258621D01* +X64205649Y-123258621D02* +X64110411Y-123306240D01* +X65538982Y-123353859D02* +X65538982Y-124020526D01* +X65300887Y-122972907D02* +X65062792Y-123687192D01* +X65062792Y-123687192D02* +X65681839Y-123687192D01* +D12* +X67513973Y-131013439D02* +X67453497Y-131073916D01* +X67453497Y-131073916D02* +X67272068Y-131134392D01* +X67272068Y-131134392D02* +X67151116Y-131134392D01* +X67151116Y-131134392D02* +X66969687Y-131073916D01* +X66969687Y-131073916D02* +X66848735Y-130952963D01* +X66848735Y-130952963D02* +X66788258Y-130832011D01* +X66788258Y-130832011D02* +X66727782Y-130590106D01* +X66727782Y-130590106D02* +X66727782Y-130408677D01* +X66727782Y-130408677D02* +X66788258Y-130166773D01* +X66788258Y-130166773D02* +X66848735Y-130045820D01* +X66848735Y-130045820D02* +X66969687Y-129924868D01* +X66969687Y-129924868D02* +X67151116Y-129864392D01* +X67151116Y-129864392D02* +X67272068Y-129864392D01* +X67272068Y-129864392D02* +X67453497Y-129924868D01* +X67453497Y-129924868D02* +X67513973Y-129985344D01* +X68118735Y-131134392D02* +X68360639Y-131134392D01* +X68360639Y-131134392D02* +X68481592Y-131073916D01* +X68481592Y-131073916D02* +X68542068Y-131013439D01* +X68542068Y-131013439D02* +X68663020Y-130832011D01* +X68663020Y-130832011D02* +X68723497Y-130590106D01* +X68723497Y-130590106D02* +X68723497Y-130106296D01* +X68723497Y-130106296D02* +X68663020Y-129985344D01* +X68663020Y-129985344D02* +X68602544Y-129924868D01* +X68602544Y-129924868D02* +X68481592Y-129864392D01* +X68481592Y-129864392D02* +X68239687Y-129864392D01* +X68239687Y-129864392D02* +X68118735Y-129924868D01* +X68118735Y-129924868D02* +X68058258Y-129985344D01* +X68058258Y-129985344D02* +X67997782Y-130106296D01* +X67997782Y-130106296D02* +X67997782Y-130408677D01* +X67997782Y-130408677D02* +X68058258Y-130529630D01* +X68058258Y-130529630D02* +X68118735Y-130590106D01* +X68118735Y-130590106D02* +X68239687Y-130650582D01* +X68239687Y-130650582D02* +X68481592Y-130650582D01* +X68481592Y-130650582D02* +X68602544Y-130590106D01* +X68602544Y-130590106D02* +X68663020Y-130529630D01* +X68663020Y-130529630D02* +X68723497Y-130408677D01* +X53503571Y-85614318D02* +X53080237Y-85009556D01* +X52777856Y-85614318D02* +X52777856Y-84344318D01* +X52777856Y-84344318D02* +X53261666Y-84344318D01* +X53261666Y-84344318D02* +X53382618Y-84404794D01* +X53382618Y-84404794D02* +X53443095Y-84465270D01* +X53443095Y-84465270D02* +X53503571Y-84586222D01* +X53503571Y-84586222D02* +X53503571Y-84767651D01* +X53503571Y-84767651D02* +X53443095Y-84888603D01* +X53443095Y-84888603D02* +X53382618Y-84949080D01* +X53382618Y-84949080D02* +X53261666Y-85009556D01* +X53261666Y-85009556D02* +X52777856Y-85009556D01* +X53987380Y-84465270D02* +X54047856Y-84404794D01* +X54047856Y-84404794D02* +X54168809Y-84344318D01* +X54168809Y-84344318D02* +X54471190Y-84344318D01* +X54471190Y-84344318D02* +X54592142Y-84404794D01* +X54592142Y-84404794D02* +X54652618Y-84465270D01* +X54652618Y-84465270D02* +X54713095Y-84586222D01* +X54713095Y-84586222D02* +X54713095Y-84707175D01* +X54713095Y-84707175D02* +X54652618Y-84888603D01* +X54652618Y-84888603D02* +X53926904Y-85614318D01* +X53926904Y-85614318D02* +X54713095Y-85614318D01* +X55499285Y-84344318D02* +X55620238Y-84344318D01* +X55620238Y-84344318D02* +X55741190Y-84404794D01* +X55741190Y-84404794D02* +X55801666Y-84465270D01* +X55801666Y-84465270D02* +X55862142Y-84586222D01* +X55862142Y-84586222D02* +X55922619Y-84828127D01* +X55922619Y-84828127D02* +X55922619Y-85130508D01* +X55922619Y-85130508D02* +X55862142Y-85372413D01* +X55862142Y-85372413D02* +X55801666Y-85493365D01* +X55801666Y-85493365D02* +X55741190Y-85553842D01* +X55741190Y-85553842D02* +X55620238Y-85614318D01* +X55620238Y-85614318D02* +X55499285Y-85614318D01* +X55499285Y-85614318D02* +X55378333Y-85553842D01* +X55378333Y-85553842D02* +X55317857Y-85493365D01* +X55317857Y-85493365D02* +X55257380Y-85372413D01* +X55257380Y-85372413D02* +X55196904Y-85130508D01* +X55196904Y-85130508D02* +X55196904Y-84828127D01* +X55196904Y-84828127D02* +X55257380Y-84586222D01* +X55257380Y-84586222D02* +X55317857Y-84465270D01* +X55317857Y-84465270D02* +X55378333Y-84404794D01* +X55378333Y-84404794D02* +X55499285Y-84344318D01* +X73823571Y-85614318D02* +X73400237Y-85009556D01* +X73097856Y-85614318D02* +X73097856Y-84344318D01* +X73097856Y-84344318D02* +X73581666Y-84344318D01* +X73581666Y-84344318D02* +X73702618Y-84404794D01* +X73702618Y-84404794D02* +X73763095Y-84465270D01* +X73763095Y-84465270D02* +X73823571Y-84586222D01* +X73823571Y-84586222D02* +X73823571Y-84767651D01* +X73823571Y-84767651D02* +X73763095Y-84888603D01* +X73763095Y-84888603D02* +X73702618Y-84949080D01* +X73702618Y-84949080D02* +X73581666Y-85009556D01* +X73581666Y-85009556D02* +X73097856Y-85009556D01* +X75033095Y-85614318D02* +X74307380Y-85614318D01* +X74670237Y-85614318D02* +X74670237Y-84344318D01* +X74670237Y-84344318D02* +X74549285Y-84525746D01* +X74549285Y-84525746D02* +X74428333Y-84646699D01* +X74428333Y-84646699D02* +X74307380Y-84707175D01* +X75819285Y-84344318D02* +X75940238Y-84344318D01* +X75940238Y-84344318D02* +X76061190Y-84404794D01* +X76061190Y-84404794D02* +X76121666Y-84465270D01* +X76121666Y-84465270D02* +X76182142Y-84586222D01* +X76182142Y-84586222D02* +X76242619Y-84828127D01* +X76242619Y-84828127D02* +X76242619Y-85130508D01* +X76242619Y-85130508D02* +X76182142Y-85372413D01* +X76182142Y-85372413D02* +X76121666Y-85493365D01* +X76121666Y-85493365D02* +X76061190Y-85553842D01* +X76061190Y-85553842D02* +X75940238Y-85614318D01* +X75940238Y-85614318D02* +X75819285Y-85614318D01* +X75819285Y-85614318D02* +X75698333Y-85553842D01* +X75698333Y-85553842D02* +X75637857Y-85493365D01* +X75637857Y-85493365D02* +X75577380Y-85372413D01* +X75577380Y-85372413D02* +X75516904Y-85130508D01* +X75516904Y-85130508D02* +X75516904Y-84828127D01* +X75516904Y-84828127D02* +X75577380Y-84586222D01* +X75577380Y-84586222D02* +X75637857Y-84465270D01* +X75637857Y-84465270D02* +X75698333Y-84404794D01* +X75698333Y-84404794D02* +X75819285Y-84344318D01* +X78884153Y-138390657D02* +X78823677Y-138451134D01* +X78823677Y-138451134D02* +X78642248Y-138511610D01* +X78642248Y-138511610D02* +X78521296Y-138511610D01* +X78521296Y-138511610D02* +X78339867Y-138451134D01* +X78339867Y-138451134D02* +X78218915Y-138330181D01* +X78218915Y-138330181D02* +X78158438Y-138209229D01* +X78158438Y-138209229D02* +X78097962Y-137967324D01* +X78097962Y-137967324D02* +X78097962Y-137785895D01* +X78097962Y-137785895D02* +X78158438Y-137543991D01* +X78158438Y-137543991D02* +X78218915Y-137423038D01* +X78218915Y-137423038D02* +X78339867Y-137302086D01* +X78339867Y-137302086D02* +X78521296Y-137241610D01* +X78521296Y-137241610D02* +X78642248Y-137241610D01* +X78642248Y-137241610D02* +X78823677Y-137302086D01* +X78823677Y-137302086D02* +X78884153Y-137362562D01* +X79972724Y-137664943D02* +X79972724Y-138511610D01* +X79670343Y-137181134D02* +X79367962Y-138088276D01* +X79367962Y-138088276D02* +X80154153Y-138088276D01* +D11* +X60170744Y-158112008D02* +X60837410Y-159112008D01* +X60837410Y-158112008D02* +X60170744Y-159112008D01* +X61123125Y-158112008D02* +X61742172Y-158112008D01* +X61742172Y-158112008D02* +X61408839Y-158492960D01* +X61408839Y-158492960D02* +X61551696Y-158492960D01* +X61551696Y-158492960D02* +X61646934Y-158540579D01* +X61646934Y-158540579D02* +X61694553Y-158588198D01* +X61694553Y-158588198D02* +X61742172Y-158683436D01* +X61742172Y-158683436D02* +X61742172Y-158921531D01* +X61742172Y-158921531D02* +X61694553Y-159016769D01* +X61694553Y-159016769D02* +X61646934Y-159064389D01* +X61646934Y-159064389D02* +X61551696Y-159112008D01* +X61551696Y-159112008D02* +X61265982Y-159112008D01* +X61265982Y-159112008D02* +X61170744Y-159064389D01* +X61170744Y-159064389D02* +X61123125Y-159016769D01* +X62504077Y-158588198D02* +X62646934Y-158635817D01* +X62646934Y-158635817D02* +X62694553Y-158683436D01* +X62694553Y-158683436D02* +X62742172Y-158778674D01* +X62742172Y-158778674D02* +X62742172Y-158921531D01* +X62742172Y-158921531D02* +X62694553Y-159016769D01* +X62694553Y-159016769D02* +X62646934Y-159064389D01* +X62646934Y-159064389D02* +X62551696Y-159112008D01* +X62551696Y-159112008D02* +X62170744Y-159112008D01* +X62170744Y-159112008D02* +X62170744Y-158112008D01* +X62170744Y-158112008D02* +X62504077Y-158112008D01* +X62504077Y-158112008D02* +X62599315Y-158159627D01* +X62599315Y-158159627D02* +X62646934Y-158207246D01* +X62646934Y-158207246D02* +X62694553Y-158302484D01* +X62694553Y-158302484D02* +X62694553Y-158397722D01* +X62694553Y-158397722D02* +X62646934Y-158492960D01* +X62646934Y-158492960D02* +X62599315Y-158540579D01* +X62599315Y-158540579D02* +X62504077Y-158588198D01* +X62504077Y-158588198D02* +X62170744Y-158588198D01* +X63694553Y-159112008D02* +X63123125Y-159112008D01* +X63408839Y-159112008D02* +X63408839Y-158112008D01* +X63408839Y-158112008D02* +X63313601Y-158254865D01* +X63313601Y-158254865D02* +X63218363Y-158350103D01* +X63218363Y-158350103D02* +X63123125Y-158397722D01* +D10* +X63746246Y-131589868D02* +X63412913Y-131113677D01* +X63174818Y-131589868D02* +X63174818Y-130589868D01* +X63174818Y-130589868D02* +X63555770Y-130589868D01* +X63555770Y-130589868D02* +X63651008Y-130637487D01* +X63651008Y-130637487D02* +X63698627Y-130685106D01* +X63698627Y-130685106D02* +X63746246Y-130780344D01* +X63746246Y-130780344D02* +X63746246Y-130923201D01* +X63746246Y-130923201D02* +X63698627Y-131018439D01* +X63698627Y-131018439D02* +X63651008Y-131066058D01* +X63651008Y-131066058D02* +X63555770Y-131113677D01* +X63555770Y-131113677D02* +X63174818Y-131113677D01* +X64698627Y-131589868D02* +X64127199Y-131589868D01* +X64412913Y-131589868D02* +X64412913Y-130589868D01* +X64412913Y-130589868D02* +X64317675Y-130732725D01* +X64317675Y-130732725D02* +X64222437Y-130827963D01* +X64222437Y-130827963D02* +X64127199Y-130875582D01* +X65079580Y-130685106D02* +X65127199Y-130637487D01* +X65127199Y-130637487D02* +X65222437Y-130589868D01* +X65222437Y-130589868D02* +X65460532Y-130589868D01* +X65460532Y-130589868D02* +X65555770Y-130637487D01* +X65555770Y-130637487D02* +X65603389Y-130685106D01* +X65603389Y-130685106D02* +X65651008Y-130780344D01* +X65651008Y-130780344D02* +X65651008Y-130875582D01* +X65651008Y-130875582D02* +X65603389Y-131018439D01* +X65603389Y-131018439D02* +X65031961Y-131589868D01* +X65031961Y-131589868D02* +X65651008Y-131589868D01* +X81834496Y-97389795D02* +X81501163Y-96913604D01* +X81263068Y-97389795D02* +X81263068Y-96389795D01* +X81263068Y-96389795D02* +X81644020Y-96389795D01* +X81644020Y-96389795D02* +X81739258Y-96437414D01* +X81739258Y-96437414D02* +X81786877Y-96485033D01* +X81786877Y-96485033D02* +X81834496Y-96580271D01* +X81834496Y-96580271D02* +X81834496Y-96723128D01* +X81834496Y-96723128D02* +X81786877Y-96818366D01* +X81786877Y-96818366D02* +X81739258Y-96865985D01* +X81739258Y-96865985D02* +X81644020Y-96913604D01* +X81644020Y-96913604D02* +X81263068Y-96913604D01* +X82405925Y-96818366D02* +X82310687Y-96770747D01* +X82310687Y-96770747D02* +X82263068Y-96723128D01* +X82263068Y-96723128D02* +X82215449Y-96627890D01* +X82215449Y-96627890D02* +X82215449Y-96580271D01* +X82215449Y-96580271D02* +X82263068Y-96485033D01* +X82263068Y-96485033D02* +X82310687Y-96437414D01* +X82310687Y-96437414D02* +X82405925Y-96389795D01* +X82405925Y-96389795D02* +X82596401Y-96389795D01* +X82596401Y-96389795D02* +X82691639Y-96437414D01* +X82691639Y-96437414D02* +X82739258Y-96485033D01* +X82739258Y-96485033D02* +X82786877Y-96580271D01* +X82786877Y-96580271D02* +X82786877Y-96627890D01* +X82786877Y-96627890D02* +X82739258Y-96723128D01* +X82739258Y-96723128D02* +X82691639Y-96770747D01* +X82691639Y-96770747D02* +X82596401Y-96818366D01* +X82596401Y-96818366D02* +X82405925Y-96818366D01* +X82405925Y-96818366D02* +X82310687Y-96865985D01* +X82310687Y-96865985D02* +X82263068Y-96913604D01* +X82263068Y-96913604D02* +X82215449Y-97008842D01* +X82215449Y-97008842D02* +X82215449Y-97199318D01* +X82215449Y-97199318D02* +X82263068Y-97294556D01* +X82263068Y-97294556D02* +X82310687Y-97342176D01* +X82310687Y-97342176D02* +X82405925Y-97389795D01* +X82405925Y-97389795D02* +X82596401Y-97389795D01* +X82596401Y-97389795D02* +X82691639Y-97342176D01* +X82691639Y-97342176D02* +X82739258Y-97294556D01* +X82739258Y-97294556D02* +X82786877Y-97199318D01* +X82786877Y-97199318D02* +X82786877Y-97008842D01* +X82786877Y-97008842D02* +X82739258Y-96913604D01* +X82739258Y-96913604D02* +X82691639Y-96865985D01* +X82691639Y-96865985D02* +X82596401Y-96818366D01* +X84074086Y-131633703D02* +X83740753Y-131157512D01* +X83502658Y-131633703D02* +X83502658Y-130633703D01* +X83502658Y-130633703D02* +X83883610Y-130633703D01* +X83883610Y-130633703D02* +X83978848Y-130681322D01* +X83978848Y-130681322D02* +X84026467Y-130728941D01* +X84026467Y-130728941D02* +X84074086Y-130824179D01* +X84074086Y-130824179D02* +X84074086Y-130967036D01* +X84074086Y-130967036D02* +X84026467Y-131062274D01* +X84026467Y-131062274D02* +X83978848Y-131109893D01* +X83978848Y-131109893D02* +X83883610Y-131157512D01* +X83883610Y-131157512D02* +X83502658Y-131157512D01* +X84455039Y-130728941D02* +X84502658Y-130681322D01* +X84502658Y-130681322D02* +X84597896Y-130633703D01* +X84597896Y-130633703D02* +X84835991Y-130633703D01* +X84835991Y-130633703D02* +X84931229Y-130681322D01* +X84931229Y-130681322D02* +X84978848Y-130728941D01* +X84978848Y-130728941D02* +X85026467Y-130824179D01* +X85026467Y-130824179D02* +X85026467Y-130919417D01* +X85026467Y-130919417D02* +X84978848Y-131062274D01* +X84978848Y-131062274D02* +X84407420Y-131633703D01* +X84407420Y-131633703D02* +X85026467Y-131633703D01* +X83536233Y-116538852D02* +X83536233Y-115538852D01* +X83536233Y-115538852D02* +X83774328Y-115538852D01* +X83774328Y-115538852D02* +X83917185Y-115586471D01* +X83917185Y-115586471D02* +X84012423Y-115681709D01* +X84012423Y-115681709D02* +X84060042Y-115776947D01* +X84060042Y-115776947D02* +X84107661Y-115967423D01* +X84107661Y-115967423D02* +X84107661Y-116110280D01* +X84107661Y-116110280D02* +X84060042Y-116300756D01* +X84060042Y-116300756D02* +X84012423Y-116395994D01* +X84012423Y-116395994D02* +X83917185Y-116491233D01* +X83917185Y-116491233D02* +X83774328Y-116538852D01* +X83774328Y-116538852D02* +X83536233Y-116538852D01* +X85060042Y-116538852D02* +X84488614Y-116538852D01* +X84774328Y-116538852D02* +X84774328Y-115538852D01* +X84774328Y-115538852D02* +X84679090Y-115681709D01* +X84679090Y-115681709D02* +X84583852Y-115776947D01* +X84583852Y-115776947D02* +X84488614Y-115824566D01* +D12* +X84505356Y-92792269D02* +X84444880Y-92852746D01* +X84444880Y-92852746D02* +X84263451Y-92913222D01* +X84263451Y-92913222D02* +X84142499Y-92913222D01* +X84142499Y-92913222D02* +X83961070Y-92852746D01* +X83961070Y-92852746D02* +X83840118Y-92731793D01* +X83840118Y-92731793D02* +X83779641Y-92610841D01* +X83779641Y-92610841D02* +X83719165Y-92368936D01* +X83719165Y-92368936D02* +X83719165Y-92187507D01* +X83719165Y-92187507D02* +X83779641Y-91945603D01* +X83779641Y-91945603D02* +X83840118Y-91824650D01* +X83840118Y-91824650D02* +X83961070Y-91703698D01* +X83961070Y-91703698D02* +X84142499Y-91643222D01* +X84142499Y-91643222D02* +X84263451Y-91643222D01* +X84263451Y-91643222D02* +X84444880Y-91703698D01* +X84444880Y-91703698D02* +X84505356Y-91764174D01* +X85593927Y-91643222D02* +X85352022Y-91643222D01* +X85352022Y-91643222D02* +X85231070Y-91703698D01* +X85231070Y-91703698D02* +X85170594Y-91764174D01* +X85170594Y-91764174D02* +X85049641Y-91945603D01* +X85049641Y-91945603D02* +X84989165Y-92187507D01* +X84989165Y-92187507D02* +X84989165Y-92671317D01* +X84989165Y-92671317D02* +X85049641Y-92792269D01* +X85049641Y-92792269D02* +X85110118Y-92852746D01* +X85110118Y-92852746D02* +X85231070Y-92913222D01* +X85231070Y-92913222D02* +X85472975Y-92913222D01* +X85472975Y-92913222D02* +X85593927Y-92852746D01* +X85593927Y-92852746D02* +X85654403Y-92792269D01* +X85654403Y-92792269D02* +X85714880Y-92671317D01* +X85714880Y-92671317D02* +X85714880Y-92368936D01* +X85714880Y-92368936D02* +X85654403Y-92247984D01* +X85654403Y-92247984D02* +X85593927Y-92187507D01* +X85593927Y-92187507D02* +X85472975Y-92127031D01* +X85472975Y-92127031D02* +X85231070Y-92127031D01* +X85231070Y-92127031D02* +X85110118Y-92187507D01* +X85110118Y-92187507D02* +X85049641Y-92247984D01* +X85049641Y-92247984D02* +X84989165Y-92368936D01* +D10* +X76743500Y-105000174D02* +X76410167Y-104523983D01* +X76172072Y-105000174D02* +X76172072Y-104000174D01* +X76172072Y-104000174D02* +X76553024Y-104000174D01* +X76553024Y-104000174D02* +X76648262Y-104047793D01* +X76648262Y-104047793D02* +X76695881Y-104095412D01* +X76695881Y-104095412D02* +X76743500Y-104190650D01* +X76743500Y-104190650D02* +X76743500Y-104333507D01* +X76743500Y-104333507D02* +X76695881Y-104428745D01* +X76695881Y-104428745D02* +X76648262Y-104476364D01* +X76648262Y-104476364D02* +X76553024Y-104523983D01* +X76553024Y-104523983D02* +X76172072Y-104523983D01* +X77219691Y-105000174D02* +X77410167Y-105000174D01* +X77410167Y-105000174D02* +X77505405Y-104952555D01* +X77505405Y-104952555D02* +X77553024Y-104904935D01* +X77553024Y-104904935D02* +X77648262Y-104762078D01* +X77648262Y-104762078D02* +X77695881Y-104571602D01* +X77695881Y-104571602D02* +X77695881Y-104190650D01* +X77695881Y-104190650D02* +X77648262Y-104095412D01* +X77648262Y-104095412D02* +X77600643Y-104047793D01* +X77600643Y-104047793D02* +X77505405Y-104000174D01* +X77505405Y-104000174D02* +X77314929Y-104000174D01* +X77314929Y-104000174D02* +X77219691Y-104047793D01* +X77219691Y-104047793D02* +X77172072Y-104095412D01* +X77172072Y-104095412D02* +X77124453Y-104190650D01* +X77124453Y-104190650D02* +X77124453Y-104428745D01* +X77124453Y-104428745D02* +X77172072Y-104523983D01* +X77172072Y-104523983D02* +X77219691Y-104571602D01* +X77219691Y-104571602D02* +X77314929Y-104619221D01* +X77314929Y-104619221D02* +X77505405Y-104619221D01* +X77505405Y-104619221D02* +X77600643Y-104571602D01* +X77600643Y-104571602D02* +X77648262Y-104523983D01* +X77648262Y-104523983D02* +X77695881Y-104428745D01* +X58073795Y-116565898D02* +X58073795Y-115565898D01* +X58073795Y-115565898D02* +X58311890Y-115565898D01* +X58311890Y-115565898D02* +X58454747Y-115613517D01* +X58454747Y-115613517D02* +X58549985Y-115708755D01* +X58549985Y-115708755D02* +X58597604Y-115803993D01* +X58597604Y-115803993D02* +X58645223Y-115994469D01* +X58645223Y-115994469D02* +X58645223Y-116137326D01* +X58645223Y-116137326D02* +X58597604Y-116327802D01* +X58597604Y-116327802D02* +X58549985Y-116423040D01* +X58549985Y-116423040D02* +X58454747Y-116518279D01* +X58454747Y-116518279D02* +X58311890Y-116565898D01* +X58311890Y-116565898D02* +X58073795Y-116565898D01* +X59026176Y-115661136D02* +X59073795Y-115613517D01* +X59073795Y-115613517D02* +X59169033Y-115565898D01* +X59169033Y-115565898D02* +X59407128Y-115565898D01* +X59407128Y-115565898D02* +X59502366Y-115613517D01* +X59502366Y-115613517D02* +X59549985Y-115661136D01* +X59549985Y-115661136D02* +X59597604Y-115756374D01* +X59597604Y-115756374D02* +X59597604Y-115851612D01* +X59597604Y-115851612D02* +X59549985Y-115994469D01* +X59549985Y-115994469D02* +X58978557Y-116565898D01* +X58978557Y-116565898D02* +X59597604Y-116565898D01* +X63727593Y-108790441D02* +X63394260Y-108314250D01* +X63156165Y-108790441D02* +X63156165Y-107790441D01* +X63156165Y-107790441D02* +X63537117Y-107790441D01* +X63537117Y-107790441D02* +X63632355Y-107838060D01* +X63632355Y-107838060D02* +X63679974Y-107885679D01* +X63679974Y-107885679D02* +X63727593Y-107980917D01* +X63727593Y-107980917D02* +X63727593Y-108123774D01* +X63727593Y-108123774D02* +X63679974Y-108219012D01* +X63679974Y-108219012D02* +X63632355Y-108266631D01* +X63632355Y-108266631D02* +X63537117Y-108314250D01* +X63537117Y-108314250D02* +X63156165Y-108314250D01* +X64679974Y-108790441D02* +X64108546Y-108790441D01* +X64394260Y-108790441D02* +X64394260Y-107790441D01* +X64394260Y-107790441D02* +X64299022Y-107933298D01* +X64299022Y-107933298D02* +X64203784Y-108028536D01* +X64203784Y-108028536D02* +X64108546Y-108076155D01* +X65584736Y-107790441D02* +X65108546Y-107790441D01* +X65108546Y-107790441D02* +X65060927Y-108266631D01* +X65060927Y-108266631D02* +X65108546Y-108219012D01* +X65108546Y-108219012D02* +X65203784Y-108171393D01* +X65203784Y-108171393D02* +X65441879Y-108171393D01* +X65441879Y-108171393D02* +X65537117Y-108219012D01* +X65537117Y-108219012D02* +X65584736Y-108266631D01* +X65584736Y-108266631D02* +X65632355Y-108361869D01* +X65632355Y-108361869D02* +X65632355Y-108599964D01* +X65632355Y-108599964D02* +X65584736Y-108695202D01* +X65584736Y-108695202D02* +X65537117Y-108742822D01* +X65537117Y-108742822D02* +X65441879Y-108790441D01* +X65441879Y-108790441D02* +X65203784Y-108790441D01* +X65203784Y-108790441D02* +X65108546Y-108742822D01* +X65108546Y-108742822D02* +X65060927Y-108695202D01* +X63771037Y-116493043D02* +X63723418Y-116540663D01* +X63723418Y-116540663D02* +X63580561Y-116588282D01* +X63580561Y-116588282D02* +X63485323Y-116588282D01* +X63485323Y-116588282D02* +X63342466Y-116540663D01* +X63342466Y-116540663D02* +X63247228Y-116445424D01* +X63247228Y-116445424D02* +X63199609Y-116350186D01* +X63199609Y-116350186D02* +X63151990Y-116159710D01* +X63151990Y-116159710D02* +X63151990Y-116016853D01* +X63151990Y-116016853D02* +X63199609Y-115826377D01* +X63199609Y-115826377D02* +X63247228Y-115731139D01* +X63247228Y-115731139D02* +X63342466Y-115635901D01* +X63342466Y-115635901D02* +X63485323Y-115588282D01* +X63485323Y-115588282D02* +X63580561Y-115588282D01* +X63580561Y-115588282D02* +X63723418Y-115635901D01* +X63723418Y-115635901D02* +X63771037Y-115683520D01* +X64342466Y-116016853D02* +X64247228Y-115969234D01* +X64247228Y-115969234D02* +X64199609Y-115921615D01* +X64199609Y-115921615D02* +X64151990Y-115826377D01* +X64151990Y-115826377D02* +X64151990Y-115778758D01* +X64151990Y-115778758D02* +X64199609Y-115683520D01* +X64199609Y-115683520D02* +X64247228Y-115635901D01* +X64247228Y-115635901D02* +X64342466Y-115588282D01* +X64342466Y-115588282D02* +X64532942Y-115588282D01* +X64532942Y-115588282D02* +X64628180Y-115635901D01* +X64628180Y-115635901D02* +X64675799Y-115683520D01* +X64675799Y-115683520D02* +X64723418Y-115778758D01* +X64723418Y-115778758D02* +X64723418Y-115826377D01* +X64723418Y-115826377D02* +X64675799Y-115921615D01* +X64675799Y-115921615D02* +X64628180Y-115969234D01* +X64628180Y-115969234D02* +X64532942Y-116016853D01* +X64532942Y-116016853D02* +X64342466Y-116016853D01* +X64342466Y-116016853D02* +X64247228Y-116064472D01* +X64247228Y-116064472D02* +X64199609Y-116112091D01* +X64199609Y-116112091D02* +X64151990Y-116207329D01* +X64151990Y-116207329D02* +X64151990Y-116397805D01* +X64151990Y-116397805D02* +X64199609Y-116493043D01* +X64199609Y-116493043D02* +X64247228Y-116540663D01* +X64247228Y-116540663D02* +X64342466Y-116588282D01* +X64342466Y-116588282D02* +X64532942Y-116588282D01* +X64532942Y-116588282D02* +X64628180Y-116540663D01* +X64628180Y-116540663D02* +X64675799Y-116493043D01* +X64675799Y-116493043D02* +X64723418Y-116397805D01* +X64723418Y-116397805D02* +X64723418Y-116207329D01* +X64723418Y-116207329D02* +X64675799Y-116112091D01* +X64675799Y-116112091D02* +X64628180Y-116064472D01* +X64628180Y-116064472D02* +X64532942Y-116016853D01* +X84107661Y-108771788D02* +X83774328Y-108295597D01* +X83536233Y-108771788D02* +X83536233Y-107771788D01* +X83536233Y-107771788D02* +X83917185Y-107771788D01* +X83917185Y-107771788D02* +X84012423Y-107819407D01* +X84012423Y-107819407D02* +X84060042Y-107867026D01* +X84060042Y-107867026D02* +X84107661Y-107962264D01* +X84107661Y-107962264D02* +X84107661Y-108105121D01* +X84107661Y-108105121D02* +X84060042Y-108200359D01* +X84060042Y-108200359D02* +X84012423Y-108247978D01* +X84012423Y-108247978D02* +X83917185Y-108295597D01* +X83917185Y-108295597D02* +X83536233Y-108295597D01* +X85012423Y-107771788D02* +X84536233Y-107771788D01* +X84536233Y-107771788D02* +X84488614Y-108247978D01* +X84488614Y-108247978D02* +X84536233Y-108200359D01* +X84536233Y-108200359D02* +X84631471Y-108152740D01* +X84631471Y-108152740D02* +X84869566Y-108152740D01* +X84869566Y-108152740D02* +X84964804Y-108200359D01* +X84964804Y-108200359D02* +X85012423Y-108247978D01* +X85012423Y-108247978D02* +X85060042Y-108343216D01* +X85060042Y-108343216D02* +X85060042Y-108581311D01* +X85060042Y-108581311D02* +X85012423Y-108676549D01* +X85012423Y-108676549D02* +X84964804Y-108724169D01* +X84964804Y-108724169D02* +X84869566Y-108771788D01* +X84869566Y-108771788D02* +X84631471Y-108771788D01* +X84631471Y-108771788D02* +X84536233Y-108724169D01* +X84536233Y-108724169D02* +X84488614Y-108676549D01* +D11* +X80506671Y-158141853D02* +X81173337Y-159141853D01* +X81173337Y-158141853D02* +X80506671Y-159141853D01* +X81459052Y-158141853D02* +X82078099Y-158141853D01* +X82078099Y-158141853D02* +X81744766Y-158522805D01* +X81744766Y-158522805D02* +X81887623Y-158522805D01* +X81887623Y-158522805D02* +X81982861Y-158570424D01* +X81982861Y-158570424D02* +X82030480Y-158618043D01* +X82030480Y-158618043D02* +X82078099Y-158713281D01* +X82078099Y-158713281D02* +X82078099Y-158951376D01* +X82078099Y-158951376D02* +X82030480Y-159046614D01* +X82030480Y-159046614D02* +X81982861Y-159094234D01* +X81982861Y-159094234D02* +X81887623Y-159141853D01* +X81887623Y-159141853D02* +X81601909Y-159141853D01* +X81601909Y-159141853D02* +X81506671Y-159094234D01* +X81506671Y-159094234D02* +X81459052Y-159046614D01* +X82459052Y-158856138D02* +X82935242Y-158856138D01* +X82363814Y-159141853D02* +X82697147Y-158141853D01* +X82697147Y-158141853D02* +X83030480Y-159141853D01* +X83887623Y-159141853D02* +X83316195Y-159141853D01* +X83601909Y-159141853D02* +X83601909Y-158141853D01* +X83601909Y-158141853D02* +X83506671Y-158284710D01* +X83506671Y-158284710D02* +X83411433Y-158379948D01* +X83411433Y-158379948D02* +X83316195Y-158427567D01* +D10* +X58969241Y-97389795D02* +X58635908Y-96913604D01* +X58397813Y-97389795D02* +X58397813Y-96389795D01* +X58397813Y-96389795D02* +X58778765Y-96389795D01* +X58778765Y-96389795D02* +X58874003Y-96437414D01* +X58874003Y-96437414D02* +X58921622Y-96485033D01* +X58921622Y-96485033D02* +X58969241Y-96580271D01* +X58969241Y-96580271D02* +X58969241Y-96723128D01* +X58969241Y-96723128D02* +X58921622Y-96818366D01* +X58921622Y-96818366D02* +X58874003Y-96865985D01* +X58874003Y-96865985D02* +X58778765Y-96913604D01* +X58778765Y-96913604D02* +X58397813Y-96913604D01* +X59921622Y-97389795D02* +X59350194Y-97389795D01* +X59635908Y-97389795D02* +X59635908Y-96389795D01* +X59635908Y-96389795D02* +X59540670Y-96532652D01* +X59540670Y-96532652D02* +X59445432Y-96627890D01* +X59445432Y-96627890D02* +X59350194Y-96675509D01* +X60493051Y-96818366D02* +X60397813Y-96770747D01* +X60397813Y-96770747D02* +X60350194Y-96723128D01* +X60350194Y-96723128D02* +X60302575Y-96627890D01* +X60302575Y-96627890D02* +X60302575Y-96580271D01* +X60302575Y-96580271D02* +X60350194Y-96485033D01* +X60350194Y-96485033D02* +X60397813Y-96437414D01* +X60397813Y-96437414D02* +X60493051Y-96389795D01* +X60493051Y-96389795D02* +X60683527Y-96389795D01* +X60683527Y-96389795D02* +X60778765Y-96437414D01* +X60778765Y-96437414D02* +X60826384Y-96485033D01* +X60826384Y-96485033D02* +X60874003Y-96580271D01* +X60874003Y-96580271D02* +X60874003Y-96627890D01* +X60874003Y-96627890D02* +X60826384Y-96723128D01* +X60826384Y-96723128D02* +X60778765Y-96770747D01* +X60778765Y-96770747D02* +X60683527Y-96818366D01* +X60683527Y-96818366D02* +X60493051Y-96818366D01* +X60493051Y-96818366D02* +X60397813Y-96865985D01* +X60397813Y-96865985D02* +X60350194Y-96913604D01* +X60350194Y-96913604D02* +X60302575Y-97008842D01* +X60302575Y-97008842D02* +X60302575Y-97199318D01* +X60302575Y-97199318D02* +X60350194Y-97294556D01* +X60350194Y-97294556D02* +X60397813Y-97342176D01* +X60397813Y-97342176D02* +X60493051Y-97389795D01* +X60493051Y-97389795D02* +X60683527Y-97389795D01* +X60683527Y-97389795D02* +X60778765Y-97342176D01* +X60778765Y-97342176D02* +X60826384Y-97294556D01* +X60826384Y-97294556D02* +X60874003Y-97199318D01* +X60874003Y-97199318D02* +X60874003Y-97008842D01* +X60874003Y-97008842D02* +X60826384Y-96913604D01* +X60826384Y-96913604D02* +X60778765Y-96865985D01* +X60778765Y-96865985D02* +X60683527Y-96818366D01* +D12* +X77586533Y-123358293D02* +X77526057Y-123418770D01* +X77526057Y-123418770D02* +X77344628Y-123479246D01* +X77344628Y-123479246D02* +X77223676Y-123479246D01* +X77223676Y-123479246D02* +X77042247Y-123418770D01* +X77042247Y-123418770D02* +X76921295Y-123297817D01* +X76921295Y-123297817D02* +X76860818Y-123176865D01* +X76860818Y-123176865D02* +X76800342Y-122934960D01* +X76800342Y-122934960D02* +X76800342Y-122753531D01* +X76800342Y-122753531D02* +X76860818Y-122511627D01* +X76860818Y-122511627D02* +X76921295Y-122390674D01* +X76921295Y-122390674D02* +X77042247Y-122269722D01* +X77042247Y-122269722D02* +X77223676Y-122209246D01* +X77223676Y-122209246D02* +X77344628Y-122209246D01* +X77344628Y-122209246D02* +X77526057Y-122269722D01* +X77526057Y-122269722D02* +X77586533Y-122330198D01* +X78009866Y-122209246D02* +X78856533Y-122209246D01* +X78856533Y-122209246D02* +X78312247Y-123479246D01* +D10* +X89668709Y-92435587D02* +X89335376Y-91959396D01* +X89097281Y-92435587D02* +X89097281Y-91435587D01* +X89097281Y-91435587D02* +X89478233Y-91435587D01* +X89478233Y-91435587D02* +X89573471Y-91483206D01* +X89573471Y-91483206D02* +X89621090Y-91530825D01* +X89621090Y-91530825D02* +X89668709Y-91626063D01* +X89668709Y-91626063D02* +X89668709Y-91768920D01* +X89668709Y-91768920D02* +X89621090Y-91864158D01* +X89621090Y-91864158D02* +X89573471Y-91911777D01* +X89573471Y-91911777D02* +X89478233Y-91959396D01* +X89478233Y-91959396D02* +X89097281Y-91959396D01* +X90002043Y-91435587D02* +X90668709Y-91435587D01* +X90668709Y-91435587D02* +X90240138Y-92435587D01* +D11* +X65229407Y-158112008D02* +X65896073Y-159112008D01* +X65896073Y-158112008D02* +X65229407Y-159112008D01* +X66229407Y-158207246D02* +X66277026Y-158159627D01* +X66277026Y-158159627D02* +X66372264Y-158112008D01* +X66372264Y-158112008D02* +X66610359Y-158112008D01* +X66610359Y-158112008D02* +X66705597Y-158159627D01* +X66705597Y-158159627D02* +X66753216Y-158207246D01* +X66753216Y-158207246D02* +X66800835Y-158302484D01* +X66800835Y-158302484D02* +X66800835Y-158397722D01* +X66800835Y-158397722D02* +X66753216Y-158540579D01* +X66753216Y-158540579D02* +X66181788Y-159112008D01* +X66181788Y-159112008D02* +X66800835Y-159112008D01* +X67562740Y-158588198D02* +X67705597Y-158635817D01* +X67705597Y-158635817D02* +X67753216Y-158683436D01* +X67753216Y-158683436D02* +X67800835Y-158778674D01* +X67800835Y-158778674D02* +X67800835Y-158921531D01* +X67800835Y-158921531D02* +X67753216Y-159016769D01* +X67753216Y-159016769D02* +X67705597Y-159064389D01* +X67705597Y-159064389D02* +X67610359Y-159112008D01* +X67610359Y-159112008D02* +X67229407Y-159112008D01* +X67229407Y-159112008D02* +X67229407Y-158112008D01* +X67229407Y-158112008D02* +X67562740Y-158112008D01* +X67562740Y-158112008D02* +X67657978Y-158159627D01* +X67657978Y-158159627D02* +X67705597Y-158207246D01* +X67705597Y-158207246D02* +X67753216Y-158302484D01* +X67753216Y-158302484D02* +X67753216Y-158397722D01* +X67753216Y-158397722D02* +X67705597Y-158492960D01* +X67705597Y-158492960D02* +X67657978Y-158540579D01* +X67657978Y-158540579D02* +X67562740Y-158588198D01* +X67562740Y-158588198D02* +X67229407Y-158588198D01* +X68753216Y-159112008D02* +X68181788Y-159112008D01* +X68467502Y-159112008D02* +X68467502Y-158112008D01* +X68467502Y-158112008D02* +X68372264Y-158254865D01* +X68372264Y-158254865D02* +X68277026Y-158350103D01* +X68277026Y-158350103D02* +X68181788Y-158397722D01* +D10* +X89188708Y-116465996D02* +X89141089Y-116513616D01* +X89141089Y-116513616D02* +X88998232Y-116561235D01* +X88998232Y-116561235D02* +X88902994Y-116561235D01* +X88902994Y-116561235D02* +X88760137Y-116513616D01* +X88760137Y-116513616D02* +X88664899Y-116418377D01* +X88664899Y-116418377D02* +X88617280Y-116323139D01* +X88617280Y-116323139D02* +X88569661Y-116132663D01* +X88569661Y-116132663D02* +X88569661Y-115989806D01* +X88569661Y-115989806D02* +X88617280Y-115799330D01* +X88617280Y-115799330D02* +X88664899Y-115704092D01* +X88664899Y-115704092D02* +X88760137Y-115608854D01* +X88760137Y-115608854D02* +X88902994Y-115561235D01* +X88902994Y-115561235D02* +X88998232Y-115561235D01* +X88998232Y-115561235D02* +X89141089Y-115608854D01* +X89141089Y-115608854D02* +X89188708Y-115656473D01* +X90141089Y-116561235D02* +X89569661Y-116561235D01* +X89855375Y-116561235D02* +X89855375Y-115561235D01* +X89855375Y-115561235D02* +X89760137Y-115704092D01* +X89760137Y-115704092D02* +X89664899Y-115799330D01* +X89664899Y-115799330D02* +X89569661Y-115846949D01* +D12* +X64412832Y-148496793D02* +X64352356Y-148557270D01* +X64352356Y-148557270D02* +X64170927Y-148617746D01* +X64170927Y-148617746D02* +X64049975Y-148617746D01* +X64049975Y-148617746D02* +X63868546Y-148557270D01* +X63868546Y-148557270D02* +X63747594Y-148436317D01* +X63747594Y-148436317D02* +X63687117Y-148315365D01* +X63687117Y-148315365D02* +X63626641Y-148073460D01* +X63626641Y-148073460D02* +X63626641Y-147892031D01* +X63626641Y-147892031D02* +X63687117Y-147650127D01* +X63687117Y-147650127D02* +X63747594Y-147529174D01* +X63747594Y-147529174D02* +X63868546Y-147408222D01* +X63868546Y-147408222D02* +X64049975Y-147347746D01* +X64049975Y-147347746D02* +X64170927Y-147347746D01* +X64170927Y-147347746D02* +X64352356Y-147408222D01* +X64352356Y-147408222D02* +X64412832Y-147468698D01* +X65622356Y-148617746D02* +X64896641Y-148617746D01* +X65259498Y-148617746D02* +X65259498Y-147347746D01* +X65259498Y-147347746D02* +X65138546Y-147529174D01* +X65138546Y-147529174D02* +X65017594Y-147650127D01* +X65017594Y-147650127D02* +X64896641Y-147710603D01* +X66408546Y-147347746D02* +X66529499Y-147347746D01* +X66529499Y-147347746D02* +X66650451Y-147408222D01* +X66650451Y-147408222D02* +X66710927Y-147468698D01* +X66710927Y-147468698D02* +X66771403Y-147589650D01* +X66771403Y-147589650D02* +X66831880Y-147831555D01* +X66831880Y-147831555D02* +X66831880Y-148133936D01* +X66831880Y-148133936D02* +X66771403Y-148375841D01* +X66771403Y-148375841D02* +X66710927Y-148496793D01* +X66710927Y-148496793D02* +X66650451Y-148557270D01* +X66650451Y-148557270D02* +X66529499Y-148617746D01* +X66529499Y-148617746D02* +X66408546Y-148617746D01* +X66408546Y-148617746D02* +X66287594Y-148557270D01* +X66287594Y-148557270D02* +X66227118Y-148496793D01* +X66227118Y-148496793D02* +X66166641Y-148375841D01* +X66166641Y-148375841D02* +X66106165Y-148133936D01* +X66106165Y-148133936D02* +X66106165Y-147831555D01* +X66106165Y-147831555D02* +X66166641Y-147589650D01* +X66166641Y-147589650D02* +X66227118Y-147468698D01* +X66227118Y-147468698D02* +X66287594Y-147408222D01* +X66287594Y-147408222D02* +X66408546Y-147347746D01* +D10* +X89143941Y-124012132D02* +X88810608Y-123535941D01* +X88572513Y-124012132D02* +X88572513Y-123012132D01* +X88572513Y-123012132D02* +X88953465Y-123012132D01* +X88953465Y-123012132D02* +X89048703Y-123059751D01* +X89048703Y-123059751D02* +X89096322Y-123107370D01* +X89096322Y-123107370D02* +X89143941Y-123202608D01* +X89143941Y-123202608D02* +X89143941Y-123345465D01* +X89143941Y-123345465D02* +X89096322Y-123440703D01* +X89096322Y-123440703D02* +X89048703Y-123488322D01* +X89048703Y-123488322D02* +X88953465Y-123535941D01* +X88953465Y-123535941D02* +X88572513Y-123535941D01* +X89477275Y-123012132D02* +X90096322Y-123012132D01* +X90096322Y-123012132D02* +X89762989Y-123393084D01* +X89762989Y-123393084D02* +X89905846Y-123393084D01* +X89905846Y-123393084D02* +X90001084Y-123440703D01* +X90001084Y-123440703D02* +X90048703Y-123488322D01* +X90048703Y-123488322D02* +X90096322Y-123583560D01* +X90096322Y-123583560D02* +X90096322Y-123821655D01* +X90096322Y-123821655D02* +X90048703Y-123916893D01* +X90048703Y-123916893D02* +X90001084Y-123964513D01* +X90001084Y-123964513D02* +X89905846Y-124012132D01* +X89905846Y-124012132D02* +X89620132Y-124012132D01* +X89620132Y-124012132D02* +X89524894Y-123964513D01* +X89524894Y-123964513D02* +X89477275Y-123916893D01* +X58642815Y-131664480D02* +X58309482Y-131188289D01* +X58071387Y-131664480D02* +X58071387Y-130664480D01* +X58071387Y-130664480D02* +X58452339Y-130664480D01* +X58452339Y-130664480D02* +X58547577Y-130712099D01* +X58547577Y-130712099D02* +X58595196Y-130759718D01* +X58595196Y-130759718D02* +X58642815Y-130854956D01* +X58642815Y-130854956D02* +X58642815Y-130997813D01* +X58642815Y-130997813D02* +X58595196Y-131093051D01* +X58595196Y-131093051D02* +X58547577Y-131140670D01* +X58547577Y-131140670D02* +X58452339Y-131188289D01* +X58452339Y-131188289D02* +X58071387Y-131188289D01* +X59595196Y-131664480D02* +X59023768Y-131664480D01* +X59309482Y-131664480D02* +X59309482Y-130664480D01* +X59309482Y-130664480D02* +X59214244Y-130807337D01* +X59214244Y-130807337D02* +X59119006Y-130902575D01* +X59119006Y-130902575D02* +X59023768Y-130950194D01* +X60547577Y-131664480D02* +X59976149Y-131664480D01* +X60261863Y-131664480D02* +X60261863Y-130664480D01* +X60261863Y-130664480D02* +X60166625Y-130807337D01* +X60166625Y-130807337D02* +X60071387Y-130902575D01* +X60071387Y-130902575D02* +X59976149Y-130950194D01* +D12* +X76153991Y-114715477D02* +X76093515Y-114775954D01* +X76093515Y-114775954D02* +X75912086Y-114836430D01* +X75912086Y-114836430D02* +X75791134Y-114836430D01* +X75791134Y-114836430D02* +X75609705Y-114775954D01* +X75609705Y-114775954D02* +X75488753Y-114655001D01* +X75488753Y-114655001D02* +X75428276Y-114534049D01* +X75428276Y-114534049D02* +X75367800Y-114292144D01* +X75367800Y-114292144D02* +X75367800Y-114110715D01* +X75367800Y-114110715D02* +X75428276Y-113868811D01* +X75428276Y-113868811D02* +X75488753Y-113747858D01* +X75488753Y-113747858D02* +X75609705Y-113626906D01* +X75609705Y-113626906D02* +X75791134Y-113566430D01* +X75791134Y-113566430D02* +X75912086Y-113566430D01* +X75912086Y-113566430D02* +X76093515Y-113626906D01* +X76093515Y-113626906D02* +X76153991Y-113687382D01* +X77303038Y-113566430D02* +X76698276Y-113566430D01* +X76698276Y-113566430D02* +X76637800Y-114171192D01* +X76637800Y-114171192D02* +X76698276Y-114110715D01* +X76698276Y-114110715D02* +X76819229Y-114050239D01* +X76819229Y-114050239D02* +X77121610Y-114050239D01* +X77121610Y-114050239D02* +X77242562Y-114110715D01* +X77242562Y-114110715D02* +X77303038Y-114171192D01* +X77303038Y-114171192D02* +X77363515Y-114292144D01* +X77363515Y-114292144D02* +X77363515Y-114594525D01* +X77363515Y-114594525D02* +X77303038Y-114715477D01* +X77303038Y-114715477D02* +X77242562Y-114775954D01* +X77242562Y-114775954D02* +X77121610Y-114836430D01* +X77121610Y-114836430D02* +X76819229Y-114836430D01* +X76819229Y-114836430D02* +X76698276Y-114775954D01* +X76698276Y-114775954D02* +X76637800Y-114715477D01* +X77586533Y-131013439D02* +X77526057Y-131073916D01* +X77526057Y-131073916D02* +X77344628Y-131134392D01* +X77344628Y-131134392D02* +X77223676Y-131134392D01* +X77223676Y-131134392D02* +X77042247Y-131073916D01* +X77042247Y-131073916D02* +X76921295Y-130952963D01* +X76921295Y-130952963D02* +X76860818Y-130832011D01* +X76860818Y-130832011D02* +X76800342Y-130590106D01* +X76800342Y-130590106D02* +X76800342Y-130408677D01* +X76800342Y-130408677D02* +X76860818Y-130166773D01* +X76860818Y-130166773D02* +X76921295Y-130045820D01* +X76921295Y-130045820D02* +X77042247Y-129924868D01* +X77042247Y-129924868D02* +X77223676Y-129864392D01* +X77223676Y-129864392D02* +X77344628Y-129864392D01* +X77344628Y-129864392D02* +X77526057Y-129924868D01* +X77526057Y-129924868D02* +X77586533Y-129985344D01* +X78070342Y-129985344D02* +X78130818Y-129924868D01* +X78130818Y-129924868D02* +X78251771Y-129864392D01* +X78251771Y-129864392D02* +X78554152Y-129864392D01* +X78554152Y-129864392D02* +X78675104Y-129924868D01* +X78675104Y-129924868D02* +X78735580Y-129985344D01* +X78735580Y-129985344D02* +X78796057Y-130106296D01* +X78796057Y-130106296D02* +X78796057Y-130227249D01* +X78796057Y-130227249D02* +X78735580Y-130408677D01* +X78735580Y-130408677D02* +X78009866Y-131134392D01* +X78009866Y-131134392D02* +X78796057Y-131134392D01* +D10* +X58655872Y-124005603D02* +X58322539Y-123529412D01* +X58084444Y-124005603D02* +X58084444Y-123005603D01* +X58084444Y-123005603D02* +X58465396Y-123005603D01* +X58465396Y-123005603D02* +X58560634Y-123053222D01* +X58560634Y-123053222D02* +X58608253Y-123100841D01* +X58608253Y-123100841D02* +X58655872Y-123196079D01* +X58655872Y-123196079D02* +X58655872Y-123338936D01* +X58655872Y-123338936D02* +X58608253Y-123434174D01* +X58608253Y-123434174D02* +X58560634Y-123481793D01* +X58560634Y-123481793D02* +X58465396Y-123529412D01* +X58465396Y-123529412D02* +X58084444Y-123529412D01* +X59608253Y-124005603D02* +X59036825Y-124005603D01* +X59322539Y-124005603D02* +X59322539Y-123005603D01* +X59322539Y-123005603D02* +X59227301Y-123148460D01* +X59227301Y-123148460D02* +X59132063Y-123243698D01* +X59132063Y-123243698D02* +X59036825Y-123291317D01* +X59941587Y-123005603D02* +X60560634Y-123005603D01* +X60560634Y-123005603D02* +X60227301Y-123386555D01* +X60227301Y-123386555D02* +X60370158Y-123386555D01* +X60370158Y-123386555D02* +X60465396Y-123434174D01* +X60465396Y-123434174D02* +X60513015Y-123481793D01* +X60513015Y-123481793D02* +X60560634Y-123577031D01* +X60560634Y-123577031D02* +X60560634Y-123815126D01* +X60560634Y-123815126D02* +X60513015Y-123910364D01* +X60513015Y-123910364D02* +X60465396Y-123957984D01* +X60465396Y-123957984D02* +X60370158Y-124005603D01* +X60370158Y-124005603D02* +X60084444Y-124005603D01* +X60084444Y-124005603D02* +X59989206Y-123957984D01* +X59989206Y-123957984D02* +X59941587Y-123910364D01* +X84720952Y-109894819D02* +X85054285Y-110894819D01* +X85054285Y-110894819D02* +X85387618Y-109894819D01* +X86292380Y-110799580D02* +X86244761Y-110847200D01* +X86244761Y-110847200D02* +X86101904Y-110894819D01* +X86101904Y-110894819D02* +X86006666Y-110894819D01* +X86006666Y-110894819D02* +X85863809Y-110847200D01* +X85863809Y-110847200D02* +X85768571Y-110751961D01* +X85768571Y-110751961D02* +X85720952Y-110656723D01* +X85720952Y-110656723D02* +X85673333Y-110466247D01* +X85673333Y-110466247D02* +X85673333Y-110323390D01* +X85673333Y-110323390D02* +X85720952Y-110132914D01* +X85720952Y-110132914D02* +X85768571Y-110037676D01* +X85768571Y-110037676D02* +X85863809Y-109942438D01* +X85863809Y-109942438D02* +X86006666Y-109894819D01* +X86006666Y-109894819D02* +X86101904Y-109894819D01* +X86101904Y-109894819D02* +X86244761Y-109942438D01* +X86244761Y-109942438D02* +X86292380Y-109990057D01* +X87292380Y-110799580D02* +X87244761Y-110847200D01* +X87244761Y-110847200D02* +X87101904Y-110894819D01* +X87101904Y-110894819D02* +X87006666Y-110894819D01* +X87006666Y-110894819D02* +X86863809Y-110847200D01* +X86863809Y-110847200D02* +X86768571Y-110751961D01* +X86768571Y-110751961D02* +X86720952Y-110656723D01* +X86720952Y-110656723D02* +X86673333Y-110466247D01* +X86673333Y-110466247D02* +X86673333Y-110323390D01* +X86673333Y-110323390D02* +X86720952Y-110132914D01* +X86720952Y-110132914D02* +X86768571Y-110037676D01* +X86768571Y-110037676D02* +X86863809Y-109942438D01* +X86863809Y-109942438D02* +X87006666Y-109894819D01* +X87006666Y-109894819D02* +X87101904Y-109894819D01* +X87101904Y-109894819D02* +X87244761Y-109942438D01* +X87244761Y-109942438D02* +X87292380Y-109990057D01* +X87482857Y-110990057D02* +X88244761Y-110990057D01* +X88435238Y-110609104D02* +X88911428Y-110609104D01* +X88340000Y-110894819D02* +X88673333Y-109894819D01* +X88673333Y-109894819D02* +X89006666Y-110894819D01* +X89863809Y-110894819D02* +X89292381Y-110894819D01* +X89578095Y-110894819D02* +X89578095Y-109894819D01* +X89578095Y-109894819D02* +X89482857Y-110037676D01* +X89482857Y-110037676D02* +X89387619Y-110132914D01* +X89387619Y-110132914D02* +X89292381Y-110180533D01* +X56115349Y-91060869D02* +X55782016Y-90584678D01* +X55543921Y-91060869D02* +X55543921Y-90060869D01* +X55543921Y-90060869D02* +X55924873Y-90060869D01* +X55924873Y-90060869D02* +X56020111Y-90108488D01* +X56020111Y-90108488D02* +X56067730Y-90156107D01* +X56067730Y-90156107D02* +X56115349Y-90251345D01* +X56115349Y-90251345D02* +X56115349Y-90394202D01* +X56115349Y-90394202D02* +X56067730Y-90489440D01* +X56067730Y-90489440D02* +X56020111Y-90537059D01* +X56020111Y-90537059D02* +X55924873Y-90584678D01* +X55924873Y-90584678D02* +X55543921Y-90584678D01* +X57067730Y-91060869D02* +X56496302Y-91060869D01* +X56782016Y-91060869D02* +X56782016Y-90060869D01* +X56782016Y-90060869D02* +X56686778Y-90203726D01* +X56686778Y-90203726D02* +X56591540Y-90298964D01* +X56591540Y-90298964D02* +X56496302Y-90346583D01* +X57401064Y-90060869D02* +X58067730Y-90060869D01* +X58067730Y-90060869D02* +X57639159Y-91060869D01* +D12* +X78884153Y-148664669D02* +X78823677Y-148725146D01* +X78823677Y-148725146D02* +X78642248Y-148785622D01* +X78642248Y-148785622D02* +X78521296Y-148785622D01* +X78521296Y-148785622D02* +X78339867Y-148725146D01* +X78339867Y-148725146D02* +X78218915Y-148604193D01* +X78218915Y-148604193D02* +X78158438Y-148483241D01* +X78158438Y-148483241D02* +X78097962Y-148241336D01* +X78097962Y-148241336D02* +X78097962Y-148059907D01* +X78097962Y-148059907D02* +X78158438Y-147818003D01* +X78158438Y-147818003D02* +X78218915Y-147697050D01* +X78218915Y-147697050D02* +X78339867Y-147576098D01* +X78339867Y-147576098D02* +X78521296Y-147515622D01* +X78521296Y-147515622D02* +X78642248Y-147515622D01* +X78642248Y-147515622D02* +X78823677Y-147576098D01* +X78823677Y-147576098D02* +X78884153Y-147636574D01* +X79307486Y-147515622D02* +X80093677Y-147515622D01* +X80093677Y-147515622D02* +X79670343Y-147999431D01* +X79670343Y-147999431D02* +X79851772Y-147999431D01* +X79851772Y-147999431D02* +X79972724Y-148059907D01* +X79972724Y-148059907D02* +X80033200Y-148120384D01* +X80033200Y-148120384D02* +X80093677Y-148241336D01* +X80093677Y-148241336D02* +X80093677Y-148543717D01* +X80093677Y-148543717D02* +X80033200Y-148664669D01* +X80033200Y-148664669D02* +X79972724Y-148725146D01* +X79972724Y-148725146D02* +X79851772Y-148785622D01* +X79851772Y-148785622D02* +X79488915Y-148785622D01* +X79488915Y-148785622D02* +X79367962Y-148725146D01* +X79367962Y-148725146D02* +X79307486Y-148664669D01* +D10* +X84040511Y-124045707D02* +X83707178Y-123569516D01* +X83469083Y-124045707D02* +X83469083Y-123045707D01* +X83469083Y-123045707D02* +X83850035Y-123045707D01* +X83850035Y-123045707D02* +X83945273Y-123093326D01* +X83945273Y-123093326D02* +X83992892Y-123140945D01* +X83992892Y-123140945D02* +X84040511Y-123236183D01* +X84040511Y-123236183D02* +X84040511Y-123379040D01* +X84040511Y-123379040D02* +X83992892Y-123474278D01* +X83992892Y-123474278D02* +X83945273Y-123521897D01* +X83945273Y-123521897D02* +X83850035Y-123569516D01* +X83850035Y-123569516D02* +X83469083Y-123569516D01* +X84897654Y-123379040D02* +X84897654Y-124045707D01* +X84659559Y-122998088D02* +X84421464Y-123712373D01* +X84421464Y-123712373D02* +X85040511Y-123712373D01* +X54169524Y-109604819D02* +X54502857Y-110604819D01* +X54502857Y-110604819D02* +X54836190Y-109604819D01* +X55740952Y-110509580D02* +X55693333Y-110557200D01* +X55693333Y-110557200D02* +X55550476Y-110604819D01* +X55550476Y-110604819D02* +X55455238Y-110604819D01* +X55455238Y-110604819D02* +X55312381Y-110557200D01* +X55312381Y-110557200D02* +X55217143Y-110461961D01* +X55217143Y-110461961D02* +X55169524Y-110366723D01* +X55169524Y-110366723D02* +X55121905Y-110176247D01* +X55121905Y-110176247D02* +X55121905Y-110033390D01* +X55121905Y-110033390D02* +X55169524Y-109842914D01* +X55169524Y-109842914D02* +X55217143Y-109747676D01* +X55217143Y-109747676D02* +X55312381Y-109652438D01* +X55312381Y-109652438D02* +X55455238Y-109604819D01* +X55455238Y-109604819D02* +X55550476Y-109604819D01* +X55550476Y-109604819D02* +X55693333Y-109652438D01* +X55693333Y-109652438D02* +X55740952Y-109700057D01* +X56740952Y-110509580D02* +X56693333Y-110557200D01* +X56693333Y-110557200D02* +X56550476Y-110604819D01* +X56550476Y-110604819D02* +X56455238Y-110604819D01* +X56455238Y-110604819D02* +X56312381Y-110557200D01* +X56312381Y-110557200D02* +X56217143Y-110461961D01* +X56217143Y-110461961D02* +X56169524Y-110366723D01* +X56169524Y-110366723D02* +X56121905Y-110176247D01* +X56121905Y-110176247D02* +X56121905Y-110033390D01* +X56121905Y-110033390D02* +X56169524Y-109842914D01* +X56169524Y-109842914D02* +X56217143Y-109747676D01* +X56217143Y-109747676D02* +X56312381Y-109652438D01* +X56312381Y-109652438D02* +X56455238Y-109604819D01* +X56455238Y-109604819D02* +X56550476Y-109604819D01* +X56550476Y-109604819D02* +X56693333Y-109652438D01* +X56693333Y-109652438D02* +X56740952Y-109700057D01* +X56931429Y-110700057D02* +X57693333Y-110700057D01* +X58264762Y-110081009D02* +X58407619Y-110128628D01* +X58407619Y-110128628D02* +X58455238Y-110176247D01* +X58455238Y-110176247D02* +X58502857Y-110271485D01* +X58502857Y-110271485D02* +X58502857Y-110414342D01* +X58502857Y-110414342D02* +X58455238Y-110509580D01* +X58455238Y-110509580D02* +X58407619Y-110557200D01* +X58407619Y-110557200D02* +X58312381Y-110604819D01* +X58312381Y-110604819D02* +X57931429Y-110604819D01* +X57931429Y-110604819D02* +X57931429Y-109604819D01* +X57931429Y-109604819D02* +X58264762Y-109604819D01* +X58264762Y-109604819D02* +X58360000Y-109652438D01* +X58360000Y-109652438D02* +X58407619Y-109700057D01* +X58407619Y-109700057D02* +X58455238Y-109795295D01* +X58455238Y-109795295D02* +X58455238Y-109890533D01* +X58455238Y-109890533D02* +X58407619Y-109985771D01* +X58407619Y-109985771D02* +X58360000Y-110033390D01* +X58360000Y-110033390D02* +X58264762Y-110081009D01* +X58264762Y-110081009D02* +X57931429Y-110081009D01* +X59455238Y-110604819D02* +X58883810Y-110604819D01* +X59169524Y-110604819D02* +X59169524Y-109604819D01* +X59169524Y-109604819D02* +X59074286Y-109747676D01* +X59074286Y-109747676D02* +X58979048Y-109842914D01* +X58979048Y-109842914D02* +X58883810Y-109890533D01* +D12* +X67379263Y-123324718D02* +X67318787Y-123385195D01* +X67318787Y-123385195D02* +X67137358Y-123445671D01* +X67137358Y-123445671D02* +X67016406Y-123445671D01* +X67016406Y-123445671D02* +X66834977Y-123385195D01* +X66834977Y-123385195D02* +X66714025Y-123264242D01* +X66714025Y-123264242D02* +X66653548Y-123143290D01* +X66653548Y-123143290D02* +X66593072Y-122901385D01* +X66593072Y-122901385D02* +X66593072Y-122719956D01* +X66593072Y-122719956D02* +X66653548Y-122478052D01* +X66653548Y-122478052D02* +X66714025Y-122357099D01* +X66714025Y-122357099D02* +X66834977Y-122236147D01* +X66834977Y-122236147D02* +X67016406Y-122175671D01* +X67016406Y-122175671D02* +X67137358Y-122175671D01* +X67137358Y-122175671D02* +X67318787Y-122236147D01* +X67318787Y-122236147D02* +X67379263Y-122296623D01* +X68588787Y-123445671D02* +X67863072Y-123445671D01* +X68225929Y-123445671D02* +X68225929Y-122175671D01* +X68225929Y-122175671D02* +X68104977Y-122357099D01* +X68104977Y-122357099D02* +X67984025Y-122478052D01* +X67984025Y-122478052D02* +X67863072Y-122538528D01* +X69677358Y-122599004D02* +X69677358Y-123445671D01* +X69374977Y-122115195D02* +X69072596Y-123022337D01* +X69072596Y-123022337D02* +X69858787Y-123022337D01* +D11* +X75462930Y-158156775D02* +X76129596Y-159156775D01* +X76129596Y-158156775D02* +X75462930Y-159156775D01* +X76462930Y-158252013D02* +X76510549Y-158204394D01* +X76510549Y-158204394D02* +X76605787Y-158156775D01* +X76605787Y-158156775D02* +X76843882Y-158156775D01* +X76843882Y-158156775D02* +X76939120Y-158204394D01* +X76939120Y-158204394D02* +X76986739Y-158252013D01* +X76986739Y-158252013D02* +X77034358Y-158347251D01* +X77034358Y-158347251D02* +X77034358Y-158442489D01* +X77034358Y-158442489D02* +X76986739Y-158585346D01* +X76986739Y-158585346D02* +X76415311Y-159156775D01* +X76415311Y-159156775D02* +X77034358Y-159156775D01* +X77415311Y-158871060D02* +X77891501Y-158871060D01* +X77320073Y-159156775D02* +X77653406Y-158156775D01* +X77653406Y-158156775D02* +X77986739Y-159156775D01* +X78843882Y-159156775D02* +X78272454Y-159156775D01* +X78558168Y-159156775D02* +X78558168Y-158156775D01* +X78558168Y-158156775D02* +X78462930Y-158299632D01* +X78462930Y-158299632D02* +X78367692Y-158394870D01* +X78367692Y-158394870D02* +X78272454Y-158442489D01* +D13* +%TO.C,C13*% +X59400000Y-89200000D02* +X59400000Y-88580000D01* +X60320000Y-90120000D02* +G75* +G02* +X58480000Y-90120000I-920000J0D01* +G01* +X58480000Y-90120000D02* +G75* +G02* +X60320000Y-90120000I920000J0D01* +G01* +%TO.C,R16*% +X65400000Y-97740000D02* +X66020000Y-97740000D01* +X65400000Y-97740000D02* +G75* +G02* +X63560000Y-97740000I-920000J0D01* +G01* +X63560000Y-97740000D02* +G75* +G02* +X65400000Y-97740000I920000J0D01* +G01* +%TO.C,R1*% +X87340000Y-129140000D02* +X87340000Y-129760000D01* +X88260000Y-128220000D02* +G75* +G02* +X86420000Y-128220000I-920000J0D01* +G01* +X86420000Y-128220000D02* +G75* +G02* +X88260000Y-128220000I920000J0D01* +G01* +%TO.C,R6*% +X78100000Y-97740000D02* +X78720000Y-97740000D01* +X78100000Y-97740000D02* +G75* +G02* +X76260000Y-97740000I-920000J0D01* +G01* +X76260000Y-97740000D02* +G75* +G02* +X78100000Y-97740000I920000J0D01* +G01* +%TO.C,R19*% +X65400000Y-102820000D02* +X66020000Y-102820000D01* +X65400000Y-102820000D02* +G75* +G02* +X63560000Y-102820000I-920000J0D01* +G01* +X63560000Y-102820000D02* +G75* +G02* +X65400000Y-102820000I920000J0D01* +G01* +D14* +%TO.C,C12*% +X70645000Y-110440000D02* +G75* +G02* +X65395000Y-110440000I-2625000J0D01* +G01* +X65395000Y-110440000D02* +G75* +G02* +X70645000Y-110440000I2625000J0D01* +G01* +%TO.C,C11*% +X69270000Y-135840000D02* +G75* +G02* +X61270000Y-135840000I-4000000J0D01* +G01* +X61270000Y-135840000D02* +G75* +G02* +X69270000Y-135840000I4000000J0D01* +G01* +D13* +%TO.C,R14*% +X61940000Y-121520000D02* +X61940000Y-122140000D01* +X62860000Y-120600000D02* +G75* +G02* +X61020000Y-120600000I-920000J0D01* +G01* +X61020000Y-120600000D02* +G75* +G02* +X62860000Y-120600000I920000J0D01* +G01* +D14* +%TO.C,C9*% +X69645000Y-126680000D02* +G75* +G02* +X64395000Y-126680000I-2625000J0D01* +G01* +X64395000Y-126680000D02* +G75* +G02* +X69645000Y-126680000I2625000J0D01* +G01* +%TO.C,R20*% +X54715000Y-82500000D02* +X58690000Y-82500000D01* +X58690000Y-81250000D02* +X65190000Y-81250000D01* +X58690000Y-83750000D02* +X58690000Y-81250000D01* +X65190000Y-81250000D02* +X65190000Y-83750000D01* +X65190000Y-82500000D02* +X69165000Y-82500000D01* +X65190000Y-83750000D02* +X58690000Y-83750000D01* +%TO.C,R10*% +X75035000Y-82500000D02* +X79010000Y-82500000D01* +X79010000Y-81250000D02* +X85510000Y-81250000D01* +X79010000Y-83750000D02* +X79010000Y-81250000D01* +X85510000Y-81250000D02* +X85510000Y-83750000D01* +X85510000Y-82500000D02* +X89485000Y-82500000D01* +X85510000Y-83750000D02* +X79010000Y-83750000D01* +%TO.C,C4*% +X82930000Y-135840000D02* +G75* +G02* +X74930000Y-135840000I-4000000J0D01* +G01* +X74930000Y-135840000D02* +G75* +G02* +X82930000Y-135840000I4000000J0D01* +G01* +D13* +%TO.C,R12*% +X61940000Y-129140000D02* +X61940000Y-129760000D01* +X62860000Y-128220000D02* +G75* +G02* +X61020000Y-128220000I-920000J0D01* +G01* +X61020000Y-128220000D02* +G75* +G02* +X62860000Y-128220000I920000J0D01* +G01* +%TO.C,R8*% +X83180000Y-95200000D02* +X83800000Y-95200000D01* +X83180000Y-95200000D02* +G75* +G02* +X81340000Y-95200000I-920000J0D01* +G01* +X81340000Y-95200000D02* +G75* +G02* +X83180000Y-95200000I920000J0D01* +G01* +%TO.C,R2*% +X82260000Y-129140000D02* +X82260000Y-129760000D01* +X83180000Y-128220000D02* +G75* +G02* +X81340000Y-128220000I-920000J0D01* +G01* +X81340000Y-128220000D02* +G75* +G02* +X83180000Y-128220000I920000J0D01* +G01* +%TO.C,D1*% +X82260000Y-114600000D02* +X82260000Y-113980000D01* +X83180000Y-115520000D02* +G75* +G02* +X81340000Y-115520000I-920000J0D01* +G01* +X81340000Y-115520000D02* +G75* +G02* +X83180000Y-115520000I920000J0D01* +G01* +D11* +%TO.C,C6*% +X83500000Y-86870000D02* +X83800000Y-86870000D01* +X83500000Y-90870000D02* +X83500000Y-86870000D01* +X83800000Y-90870000D02* +X83500000Y-90870000D01* +X85800000Y-90870000D02* +X86100000Y-90870000D01* +X86100000Y-86870000D02* +X85800000Y-86870000D01* +X86100000Y-90870000D02* +X86100000Y-86870000D01* +D13* +%TO.C,R9*% +X78100000Y-102820000D02* +X78720000Y-102820000D01* +X78100000Y-102820000D02* +G75* +G02* +X76260000Y-102820000I-920000J0D01* +G01* +X76260000Y-102820000D02* +G75* +G02* +X78100000Y-102820000I920000J0D01* +G01* +%TO.C,D2*% +X56860000Y-114600000D02* +X56860000Y-113980000D01* +X57780000Y-115520000D02* +G75* +G02* +X55940000Y-115520000I-920000J0D01* +G01* +X55940000Y-115520000D02* +G75* +G02* +X57780000Y-115520000I920000J0D01* +G01* +%TO.C,R15*% +X61940000Y-106280000D02* +X61940000Y-106900000D01* +X62860000Y-105360000D02* +G75* +G02* +X61020000Y-105360000I-920000J0D01* +G01* +X61020000Y-105360000D02* +G75* +G02* +X62860000Y-105360000I920000J0D01* +G01* +%TO.C,C8*% +X61940000Y-114600000D02* +X61940000Y-113980000D01* +X62860000Y-115520000D02* +G75* +G02* +X61020000Y-115520000I-920000J0D01* +G01* +X61020000Y-115520000D02* +G75* +G02* +X62860000Y-115520000I920000J0D01* +G01* +%TO.C,R5*% +X82260000Y-106280000D02* +X82260000Y-106900000D01* +X83180000Y-105360000D02* +G75* +G02* +X81340000Y-105360000I-920000J0D01* +G01* +X81340000Y-105360000D02* +G75* +G02* +X83180000Y-105360000I920000J0D01* +G01* +%TO.C,R18*% +X60320000Y-95200000D02* +X60940000Y-95200000D01* +X60320000Y-95200000D02* +G75* +G02* +X58480000Y-95200000I-920000J0D01* +G01* +X58480000Y-95200000D02* +G75* +G02* +X60320000Y-95200000I920000J0D01* +G01* +D14* +%TO.C,C7*% +X79805000Y-119060000D02* +G75* +G02* +X74555000Y-119060000I-2625000J0D01* +G01* +X74555000Y-119060000D02* +G75* +G02* +X79805000Y-119060000I2625000J0D01* +G01* +D13* +%TO.C,R7*% +X89880000Y-89200000D02* +X89880000Y-88580000D01* +X90800000Y-90120000D02* +G75* +G02* +X88960000Y-90120000I-920000J0D01* +G01* +X88960000Y-90120000D02* +G75* +G02* +X90800000Y-90120000I920000J0D01* +G01* +%TO.C,C1*% +X87340000Y-114600000D02* +X87340000Y-113980000D01* +X88260000Y-115520000D02* +G75* +G02* +X86420000Y-115520000I-920000J0D01* +G01* +X86420000Y-115520000D02* +G75* +G02* +X88260000Y-115520000I920000J0D01* +G01* +D14* +%TO.C,C10*% +X69270000Y-146000000D02* +G75* +G02* +X61270000Y-146000000I-4000000J0D01* +G01* +X61270000Y-146000000D02* +G75* +G02* +X69270000Y-146000000I4000000J0D01* +G01* +D13* +%TO.C,R3*% +X87340000Y-121520000D02* +X87340000Y-122140000D01* +X88260000Y-120600000D02* +G75* +G02* +X86420000Y-120600000I-920000J0D01* +G01* +X86420000Y-120600000D02* +G75* +G02* +X88260000Y-120600000I920000J0D01* +G01* +%TO.C,R11*% +X56860000Y-129140000D02* +X56860000Y-129760000D01* +X57780000Y-128220000D02* +G75* +G02* +X55940000Y-128220000I-920000J0D01* +G01* +X55940000Y-128220000D02* +G75* +G02* +X57780000Y-128220000I920000J0D01* +G01* +D14* +%TO.C,C5*% +X78805000Y-110440000D02* +G75* +G02* +X73555000Y-110440000I-2625000J0D01* +G01* +X73555000Y-110440000D02* +G75* +G02* +X78805000Y-110440000I2625000J0D01* +G01* +%TO.C,C2*% +X79805000Y-126680000D02* +G75* +G02* +X74555000Y-126680000I-2625000J0D01* +G01* +X74555000Y-126680000D02* +G75* +G02* +X79805000Y-126680000I2625000J0D01* +G01* +D13* +%TO.C,R13*% +X56860000Y-121520000D02* +X56860000Y-122140000D01* +X57780000Y-120600000D02* +G75* +G02* +X55940000Y-120600000I-920000J0D01* +G01* +X55940000Y-120600000D02* +G75* +G02* +X57780000Y-120600000I920000J0D01* +G01* +%TO.C,VCC_A1*% +X88591000Y-107900000D02* +G75* +G02* +X86089000Y-107900000I-1251000J0D01* +G01* +X86089000Y-107900000D02* +G75* +G02* +X88591000Y-107900000I1251000J0D01* +G01* +%TO.C,R17*% +X54320000Y-88500000D02* +X54320000Y-89120000D01* +X55240000Y-87580000D02* +G75* +G02* +X53400000Y-87580000I-920000J0D01* +G01* +X53400000Y-87580000D02* +G75* +G02* +X55240000Y-87580000I920000J0D01* +G01* +D14* +%TO.C,C3*% +X82930000Y-146000000D02* +G75* +G02* +X74930000Y-146000000I-4000000J0D01* +G01* +X74930000Y-146000000D02* +G75* +G02* +X82930000Y-146000000I4000000J0D01* +G01* +D13* +%TO.C,R4*% +X82260000Y-121520000D02* +X82260000Y-122140000D01* +X83180000Y-120600000D02* +G75* +G02* +X81340000Y-120600000I-920000J0D01* +G01* +X81340000Y-120600000D02* +G75* +G02* +X83180000Y-120600000I920000J0D01* +G01* +%TO.C,VCC_B1*% +X58111000Y-107900000D02* +G75* +G02* +X55609000Y-107900000I-1251000J0D01* +G01* +X55609000Y-107900000D02* +G75* +G02* +X58111000Y-107900000I1251000J0D01* +G01* +D14* +%TO.C,C14*% +X69645000Y-119060000D02* +G75* +G02* +X64395000Y-119060000I-2625000J0D01* +G01* +X64395000Y-119060000D02* +G75* +G02* +X69645000Y-119060000I2625000J0D01* +G01* +%TD*% +M02* diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/gerbers_v2/mic_preamp_pcb_prototype_p2-job.gbrjob b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/gerbers_v2/mic_preamp_pcb_prototype_p2-job.gbrjob new file mode 100644 index 0000000..2299dd0 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/gerbers_v2/mic_preamp_pcb_prototype_p2-job.gbrjob @@ -0,0 +1,127 @@ +{ + "Header": { + "GenerationSoftware": { + "Vendor": "KiCad", + "Application": "Pcbnew", + "Version": "9.0.8-1.fc42" + }, + "CreationDate": "2026-04-23T23:16:55+02:00" + }, + "GeneralSpecs": { + "ProjectId": { + "Name": "mic_preamp_pcb_prototype_p2", + "GUID": "6d69635f-7072-4656-916d-705f7063625f", + "Revision": "rev?" + }, + "Size": { + "X": 41.7989, + "Y": 94.5755 + }, + "LayerNumber": 2, + "BoardThickness": 1.6, + "Finish": "None" + }, + "DesignRules": [ + { + "Layers": "Outer", + "PadToPad": 0.2, + "PadToTrack": 0.2, + "TrackToTrack": 0.2, + "MinLineWidth": 0.25, + "TrackToRegion": 0.3, + "RegionToRegion": 0.3 + } + ], + "FilesAttributes": [ + { + "Path": "mic_preamp_pcb_prototype_p2-F_Cu.gtl", + "FileFunction": "Copper,L1,Top", + "FilePolarity": "Positive" + }, + { + "Path": "mic_preamp_pcb_prototype_p2-B_Cu.gbl", + "FileFunction": "Copper,L2,Bot", + "FilePolarity": "Positive" + }, + { + "Path": "mic_preamp_pcb_prototype_p2-F_Paste.gtp", + "FileFunction": "SolderPaste,Top", + "FilePolarity": "Positive" + }, + { + "Path": "mic_preamp_pcb_prototype_p2-B_Paste.gbp", + "FileFunction": "SolderPaste,Bot", + "FilePolarity": "Positive" + }, + { + "Path": "mic_preamp_pcb_prototype_p2-F_Silkscreen.gto", + "FileFunction": "Legend,Top", + "FilePolarity": "Positive" + }, + { + "Path": "mic_preamp_pcb_prototype_p2-B_Silkscreen.gbo", + "FileFunction": "Legend,Bot", + "FilePolarity": "Positive" + }, + { + "Path": "mic_preamp_pcb_prototype_p2-F_Mask.gts", + "FileFunction": "SolderMask,Top", + "FilePolarity": "Negative" + }, + { + "Path": "mic_preamp_pcb_prototype_p2-B_Mask.gbs", + "FileFunction": "SolderMask,Bot", + "FilePolarity": "Negative" + }, + { + "Path": "mic_preamp_pcb_prototype_p2-Edge_Cuts.gm1", + "FileFunction": "Profile", + "FilePolarity": "Positive" + } + ], + "MaterialStackup": [ + { + "Type": "Legend", + "Name": "Top Silk Screen" + }, + { + "Type": "SolderPaste", + "Name": "Top Solder Paste" + }, + { + "Type": "SolderMask", + "Thickness": 0.01, + "Name": "Top Solder Mask" + }, + { + "Type": "Copper", + "Thickness": 0.035, + "Name": "F.Cu" + }, + { + "Type": "Dielectric", + "Thickness": 1.51, + "Material": "FR4", + "Name": "F.Cu/B.Cu", + "Notes": "Type: dielectric layer 1 (from F.Cu to B.Cu)" + }, + { + "Type": "Copper", + "Thickness": 0.035, + "Name": "B.Cu" + }, + { + "Type": "SolderMask", + "Thickness": 0.01, + "Name": "Bottom Solder Mask" + }, + { + "Type": "SolderPaste", + "Name": "Bottom Solder Paste" + }, + { + "Type": "Legend", + "Name": "Bottom Silk Screen" + } + ] +} diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/gerbers_v2/mic_preamp_pcb_prototype_p2.drl b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/gerbers_v2/mic_preamp_pcb_prototype_p2.drl new file mode 100644 index 0000000..7ea7c66 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/gerbers_v2/mic_preamp_pcb_prototype_p2.drl @@ -0,0 +1,128 @@ +M48 +; DRILL file {KiCad 9.0.8-1.fc42} date 2026-04-23T23:16:56+0200 +; FORMAT={-:-/ absolute / metric / decimal} +; #@! TF.CreationDate,2026-04-23T23:16:56+02:00 +; #@! TF.GenerationSoftware,Kicad,Pcbnew,9.0.8-1.fc42 +; #@! TF.FileFunction,MixedPlating,1,2 +FMAT,2 +METRIC +; #@! TA.AperFunction,Plated,PTH,ViaDrill +T1C0.400 +; #@! TA.AperFunction,Plated,PTH,ComponentDrill +T2C0.700 +; #@! TA.AperFunction,Plated,PTH,ComponentDrill +T3C0.750 +; #@! TA.AperFunction,Plated,PTH,ComponentDrill +T4C0.850 +; #@! TA.AperFunction,Plated,PTH,ComponentDrill +T5C0.900 +; #@! TA.AperFunction,Plated,PTH,ComponentDrill +T6C1.000 +; #@! TA.AperFunction,Plated,PTH,ComponentDrill +T7C1.500 +; #@! TA.AperFunction,NonPlated,NPTH,ComponentDrill +T8C2.700 +% +G90 +G05 +T1 +X60.095Y-92.286 +X69.02Y-88.803 +X78.574Y-94.21 +T2 +X54.32Y-87.58 +X54.32Y-90.12 +X56.86Y-112.98 +X56.86Y-115.52 +X56.86Y-120.6 +X56.86Y-123.14 +X56.86Y-128.22 +X56.86Y-130.76 +X59.4Y-87.58 +X59.4Y-90.12 +X59.4Y-95.2 +X61.94Y-95.2 +X61.94Y-105.36 +X61.94Y-107.9 +X61.94Y-112.98 +X61.94Y-115.52 +X61.94Y-120.6 +X61.94Y-123.14 +X61.94Y-128.22 +X61.94Y-130.76 +X64.48Y-97.74 +X64.48Y-102.82 +X67.02Y-97.74 +X67.02Y-102.82 +X67.02Y-110.44 +X67.02Y-118.06 +X67.02Y-120.06 +X67.02Y-125.68 +X67.02Y-127.68 +X69.02Y-110.44 +X75.18Y-110.44 +X77.18Y-97.74 +X77.18Y-102.82 +X77.18Y-110.44 +X77.18Y-118.06 +X77.18Y-120.06 +X77.18Y-125.68 +X77.18Y-127.68 +X79.72Y-97.74 +X79.72Y-102.82 +X82.26Y-95.2 +X82.26Y-105.36 +X82.26Y-107.9 +X82.26Y-112.98 +X82.26Y-115.52 +X82.26Y-120.6 +X82.26Y-123.14 +X82.26Y-128.22 +X82.26Y-130.76 +X84.8Y-95.2 +X87.34Y-112.98 +X87.34Y-115.52 +X87.34Y-120.6 +X87.34Y-123.14 +X87.34Y-128.22 +X87.34Y-130.76 +X89.88Y-87.58 +X89.88Y-90.12 +T3 +X84.8Y-87.62 +X84.8Y-90.12 +T4 +X63.52Y-135.84 +X63.52Y-146.0 +X67.02Y-135.84 +X67.02Y-146.0 +X77.18Y-135.84 +X77.18Y-146.0 +X80.68Y-135.84 +X80.68Y-146.0 +T5 +X53.69Y-82.5 +X70.19Y-82.5 +X74.01Y-82.5 +X90.51Y-82.5 +T6 +X56.86Y-107.9 +X87.34Y-107.9 +T7 +X54.32Y-69.8 +X60.67Y-69.8 +X61.94Y-156.16 +X67.02Y-69.8 +X67.02Y-156.16 +X72.1Y-156.16 +X77.18Y-69.8 +X77.18Y-156.16 +X82.26Y-156.16 +X83.53Y-69.8 +X89.88Y-69.8 +T8 +X57.095Y-77.591G85X57.895Y-77.591 +G05 +X86.095Y-77.591G85X86.895Y-77.591 +G05 +M30 diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/mic_preamp_pcb_prototype_p2-backups/mic_preamp_pcb_prototype_p2-2026-04-25_205238.zip b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/mic_preamp_pcb_prototype_p2-backups/mic_preamp_pcb_prototype_p2-2026-04-25_205238.zip new file mode 100644 index 0000000..657273e Binary files /dev/null and b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/mic_preamp_pcb_prototype_p2-backups/mic_preamp_pcb_prototype_p2-2026-04-25_205238.zip differ diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/mic_preamp_pcb_prototype_p2.kicad_pcb b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/mic_preamp_pcb_prototype_p2.kicad_pcb index 373e3e8..9443727 100644 --- a/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/mic_preamp_pcb_prototype_p2.kicad_pcb +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/mic_preamp_pcb_prototype_p2.kicad_pcb @@ -1,2586 +1,10408 @@ -(kicad_pcb (version 20221018) (generator pcbnew) - - (general - (thickness 1.6) - ) - - (paper "A4") - (layers - (0 "F.Cu" signal) - (31 "B.Cu" signal) - (32 "B.Adhes" user "B.Adhesive") - (33 "F.Adhes" user "F.Adhesive") - (34 "B.Paste" user) - (35 "F.Paste" user) - (36 "B.SilkS" user "B.Silkscreen") - (37 "F.SilkS" user "F.Silkscreen") - (38 "B.Mask" user) - (39 "F.Mask" user) - (40 "Dwgs.User" user "User.Drawings") - (41 "Cmts.User" user "User.Comments") - (42 "Eco1.User" user "User.Eco1") - (43 "Eco2.User" user "User.Eco2") - (44 "Edge.Cuts" user) - (45 "Margin" user) - (46 "B.CrtYd" user "B.Courtyard") - (47 "F.CrtYd" user "F.Courtyard") - (48 "B.Fab" user) - (49 "F.Fab" user) - (50 "User.1" user) - (51 "User.2" user) - (52 "User.3" user) - (53 "User.4" user) - (54 "User.5" user) - (55 "User.6" user) - (56 "User.7" user) - (57 "User.8" user) - (58 "User.9" user) - ) - - (setup - (stackup - (layer "F.SilkS" (type "Top Silk Screen")) - (layer "F.Paste" (type "Top Solder Paste")) - (layer "F.Mask" (type "Top Solder Mask") (thickness 0.01)) - (layer "F.Cu" (type "copper") (thickness 0.035)) - (layer "dielectric 1" (type "core") (thickness 1.51) (material "FR4") (epsilon_r 4.5) (loss_tangent 0.02)) - (layer "B.Cu" (type "copper") (thickness 0.035)) - (layer "B.Mask" (type "Bottom Solder Mask") (thickness 0.01)) - (layer "B.Paste" (type "Bottom Solder Paste")) - (layer "B.SilkS" (type "Bottom Silk Screen")) - (copper_finish "None") - (dielectric_constraints no) - ) - (pad_to_mask_clearance 0) - (grid_origin 219.42 67.26) - (pcbplotparams - (layerselection 0x00010fc_ffffffff) - (plot_on_all_layers_selection 0x0000000_00000000) - (disableapertmacros false) - (usegerberextensions false) - (usegerberattributes true) - (usegerberadvancedattributes true) - (creategerberjobfile true) - (dashed_line_dash_ratio 12.000000) - (dashed_line_gap_ratio 3.000000) - (svgprecision 4) - (plotframeref false) - (viasonmask false) - (mode 1) - (useauxorigin false) - (hpglpennumber 1) - (hpglpenspeed 20) - (hpglpendiameter 15.000000) - (dxfpolygonmode true) - (dxfimperialunits true) - (dxfusepcbnewfont true) - (psnegative false) - (psa4output false) - (plotreference true) - (plotvalue true) - (plotinvisibletext false) - (sketchpadsonfab false) - (subtractmaskfromsilk false) - (outputformat 1) - (mirror false) - (drillshape 0) - (scaleselection 1) - (outputdirectory "Gerbers") - ) - ) - - (net 0 "") - (net 1 "Net-(D1-K)") - (net 2 "Earth") - (net 3 "Net-(C3-Pad1)") - (net 4 "GND") - (net 5 "Net-(C3-Pad2)") - (net 6 "Net-(C4-Pad1)") - (net 7 "Net-(C4-Pad2)") - (net 8 "Net-(C5-Pad1)") - (net 9 "Net-(VCC_A2-Pin_1)") - (net 10 "Net-(D2-K)") - (net 11 "Net-(C10-Pad1)") - (net 12 "Net-(C10-Pad2)") - (net 13 "Net-(C11-Pad1)") - (net 14 "Net-(C11-Pad2)") - (net 15 "Net-(C12-Pad1)") - (net 16 "Net-(VCC_B2-Pin_1)") - (net 17 "Net-(SGNL_A1-Pin_1)") - (net 18 "Net-(IC1-Pad3)") - (net 19 "Net-(IC1-Pad6)") - (net 20 "Net-(SGNL_B1-Pin_1)") - (net 21 "Net-(IC2-Pad3)") - (net 22 "Net-(IC2-Pad6)") - (net 23 "Net-(X3A1-Pin_1)") - (net 24 "Net-(X2A1-Pin_1)") - (net 25 "Net-(X3B1-Pin_1)") - (net 26 "Net-(X2B1-Pin_1)") - - (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") - (tstamp 04cdfa84-93d5-4ee1-9040-d0312d749bd6) - (at 59.4 90.12 90) - (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") - (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Unpolarized capacitor") - (property "ki_keywords" "cap capacitor") - (path "/b34f1ed3-ca84-4b39-accd-7cbb7c08ede6") - (attr through_hole) - (fp_text reference "C13" (at -0.553201 2.439254) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp e7e3fa75-c2fc-46bd-b988-524e73c7524b) - ) - (fp_text value "0.1uF" (at 1.27 1.92 90) (layer "F.Fab") hide - (effects (font (size 1 1) (thickness 0.15))) - (tstamp ce2f5b5c-0c53-4205-ac98-785d789f2ec6) - ) - (fp_line (start 0.92 0) (end 1.54 0) - (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 745c8e4d-5da7-4f44-a20b-25864bf10001)) - (fp_circle (center 0 0) (end 0.92 0) - (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp c0f7a03c-0ad2-4804-b3e1-d1ac01f576fd)) - (fp_line (start -1.05 -1.05) (end -1.05 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp e863d924-af2c-44ae-b0a1-73e980de9875)) - (fp_line (start -1.05 1.05) (end 3.49 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 1eae90c6-3259-484a-a33a-023af40e32a2)) - (fp_line (start 3.49 -1.05) (end -1.05 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp a9b74ddf-5cee-4a52-a165-56c2b02c46ad)) - (fp_line (start 3.49 1.05) (end 3.49 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp eba0052a-3f0c-4850-9d3c-a37d54f8bac2)) - (fp_line (start 0 0) (end 2.54 0) - (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 22681448-812a-4abe-abcf-60313ea09da1)) - (fp_circle (center 0 0) (end 0.8 0) - (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 2e2a2d8e-b46f-4391-8379-816526a0f339)) - (pad "1" thru_hole circle (at 0 0 90) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 16 "Net-(VCC_B2-Pin_1)") (pintype "passive") (tstamp b5037d99-8272-4e16-b39b-a2a20234e7f1)) - (pad "2" thru_hole oval (at 2.54 0 90) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 2 "Earth") (pintype "passive") (tstamp 8d847d48-72e1-4c36-9931-8cfb4dfd1ac0)) - (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - - (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") - (tstamp 06a23103-0375-47b9-9d2d-e1886a061500) - (at 64.48 97.74) - (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") - (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Resistor") - (property "ki_keywords" "R res resistor") - (path "/4dfa4bfd-4e46-43b4-9020-c77e950185e1") - (attr through_hole) - (fp_text reference "R16" (at 0.213146 1.746691) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 1b011455-2b58-4f34-b9d0-ea77e5f68ec2) - ) - (fp_text value "2.2K" (at 1.27 1.92) (layer "F.Fab") hide - (effects (font (size 1 1) (thickness 0.15))) - (tstamp ef3764f3-5e9f-4c05-88e7-b69168ea8607) - ) - (fp_line (start 0.92 0) (end 1.54 0) - (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 47428e46-80cf-4a9f-80bc-774e2dd5d84d)) - (fp_circle (center 0 0) (end 0.92 0) - (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp f7bbf5bd-0860-4583-9c9e-02e22a08a8ca)) - (fp_line (start -1.05 -1.05) (end -1.05 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp d1435468-f3f3-4c95-9254-edc5fe1e7538)) - (fp_line (start -1.05 1.05) (end 3.49 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 9a547cd5-433e-453c-8217-3d6746024354)) - (fp_line (start 3.49 -1.05) (end -1.05 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 2d3b1bb4-93db-4bf5-ab00-d504ab21e1e5)) - (fp_line (start 3.49 1.05) (end 3.49 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 14f2f782-d3d5-457e-9b44-ac104f15b4ed)) - (fp_line (start 0 0) (end 2.54 0) - (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp e0df1665-27fd-449f-aca0-82f2114c64b9)) - (fp_circle (center 0 0) (end 0.8 0) - (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 1ae364a0-6e8b-4707-be25-86ad093f8d15)) - (pad "1" thru_hole circle (at 0 0) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 22 "Net-(IC2-Pad6)") (pintype "passive") (tstamp c51b7066-bde8-48bc-b0e5-883836bab8a4)) - (pad "2" thru_hole oval (at 2.54 0) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 12 "Net-(C10-Pad2)") (pintype "passive") (tstamp d1473500-173c-4d85-985c-932b6bfdb702)) - (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - - (footprint "MountingHole:MountingHole_2.7mm_M2.5_ISO14580" (layer "F.Cu") - (tstamp 06a73276-4738-419b-bc90-44210544e3fe) - (at 57.495 77.591) - (descr "Mounting Hole 2.7mm, no annular, M2.5, ISO14580") - (tags "mounting hole 2.7mm no annular m2.5 iso14580") - (property "Sheetfile" "StudioMic.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Mounting Hole without connection") - (property "ki_keywords" "mounting hole") - (attr exclude_from_pos_files) - (fp_text reference "H1" (at 0 -3.25) (layer "F.SilkS") hide - (effects (font (size 1 1) (thickness 0.15))) - (tstamp db699c64-ba8b-4e68-8122-4b315359b5f2) - ) - (fp_text value "M2.5" (at 0 3.25) (layer "F.Fab") hide - (effects (font (size 1 1) (thickness 0.15))) - (tstamp cfbd51a1-0b26-4952-a8eb-b6f8c7a75f1f) - ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp f0bc4919-5f99-45ba-a4ae-986c8f04c10a) - ) - (fp_circle (center 0 0) (end 2.25 0) - (stroke (width 0.15) (type solid)) (fill none) (layer "Cmts.User") (tstamp 86a7048d-682a-4ad8-af23-3a4be441d615)) - (fp_circle (center 0 0) (end 2.5 0) - (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd") (tstamp e1b489b6-5af7-44d0-b23a-7914f8af8879)) - (pad "" np_thru_hole oval (at 0 0) (size 3.5 2.7) (drill oval 3.5 2.7) (layers "F&B.Cu" "*.Mask") - (thermal_bridge_angle 45) (tstamp 3cc6757b-2ef4-4f86-953d-f8e25ecdb6dc)) - ) - - (footprint "Library:conn_holepad" (layer "F.Cu") - (tstamp 0d7d7047-21e2-4464-b6ae-828a43548935) - (at 72.1 156.16) - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Generic connector, single row, 01x01, script generated") - (property "ki_keywords" "connector") - (path "/cf4c5d8d-0c85-43b3-b2ab-eff2610198e1") - (attr through_hole) - (fp_text reference "X1" (at 0 -0.5 unlocked) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.1))) - (tstamp 7f7ff3c7-87d0-4667-be20-a77440a2a01c) - ) - (fp_text value "Conn_01x01_Pin" (at 0 1 unlocked) (layer "F.Fab") hide - (effects (font (size 1 1) (thickness 0.15))) - (tstamp c5175324-d7b3-48f1-adc1-e4e54a5cd289) - ) - (fp_text user "${REFERENCE}" (at 0 2.5 unlocked) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 7ed70e4d-fab4-4234-92b1-1e035f55ae07) - ) - (pad "1" thru_hole circle (at 0 0) (size 3 3) (drill 1.5) (layers "*.Cu" "*.Mask") - (net 4 "GND") (pinfunction "Pin_1") (pintype "passive") (tstamp ad89e844-d3c4-47e7-9865-ad19d0aeab33)) - ) - - (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") - (tstamp 164b3322-14a0-4ba8-9213-866bdfffe114) - (at 87.34 128.22 -90) - (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") - (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Resistor") - (property "ki_keywords" "R res resistor") - (path "/465be87b-5590-4da0-9122-4e5009c124ff") - (attr through_hole) - (fp_text reference "R1" (at 2.891733 -1.937033 -180) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 7016fc18-6df7-4cf0-8145-a161da92d943) - ) - (fp_text value "47" (at 1.27 1.92 -90) (layer "F.Fab") hide - (effects (font (size 1 1) (thickness 0.15))) - (tstamp e31afb44-10ca-4053-8616-df692abfbf50) - ) - (fp_line (start 0.92 0) (end 1.54 0) - (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp e7e0f93e-e037-4307-af8c-630d93f2aa8a)) - (fp_circle (center 0 0) (end 0.92 0) - (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp 8fd70b97-3f7d-4c7e-abe2-00c7ca6df05b)) - (fp_line (start -1.05 -1.05) (end -1.05 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp af0a02c1-a929-4b4e-b125-5da65e8f33ed)) - (fp_line (start -1.05 1.05) (end 3.49 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 1a97f59e-5a9d-4fd5-9bf9-a9d39bedf1cb)) - (fp_line (start 3.49 -1.05) (end -1.05 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp f43bdfe6-564a-4250-8e73-3c83a173bd64)) - (fp_line (start 3.49 1.05) (end 3.49 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 39517e59-18cd-48a5-bcb7-8bf4d2de6838)) - (fp_line (start 0 0) (end 2.54 0) - (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp bfdb51a1-8150-408a-bb28-4b074f64ebd1)) - (fp_circle (center 0 0) (end 0.8 0) - (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 3a6c1c4a-911d-40ad-8a7f-6d0b0329704d)) - (pad "1" thru_hole circle (at 0 0 270) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 3 "Net-(C3-Pad1)") (pintype "passive") (tstamp f0f0b9e2-bd1e-4cc8-85f4-83d16144d318)) - (pad "2" thru_hole oval (at 2.54 0 270) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 23 "Net-(X3A1-Pin_1)") (pintype "passive") (tstamp cc2e40ce-5b5d-47d5-9c39-cebc9b9d3fd4)) - (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - - (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") - (tstamp 208db086-01b9-4ed9-8543-986ef572fe92) - (at 77.18 97.74) - (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") - (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Resistor") - (property "ki_keywords" "R res resistor") - (path "/a10f13f8-a81d-4f2b-b313-a7028981413d") - (attr through_hole) - (fp_text reference "R6" (at -0.259885 1.754152) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 0aca9955-60e9-44e0-9b6c-0673e92a1bcc) - ) - (fp_text value "2.2K" (at 1.27 1.92) (layer "F.Fab") hide - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 9f35ce26-b6ae-4de0-bbf1-13f812364108) - ) - (fp_line (start 0.92 0) (end 1.54 0) - (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 2fe2d874-de20-4f50-aafe-96a141e37236)) - (fp_circle (center 0 0) (end 0.92 0) - (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp 873de376-52d5-43c4-a3cf-fa43f1d91a6f)) - (fp_line (start -1.05 -1.05) (end -1.05 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 7da9831c-3ac5-441e-9859-47efbb9b4b85)) - (fp_line (start -1.05 1.05) (end 3.49 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 90c21000-2a25-4b9e-8305-003112da7640)) - (fp_line (start 3.49 -1.05) (end -1.05 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 3828b049-eab0-4a39-add4-64ff0e3d2fc6)) - (fp_line (start 3.49 1.05) (end 3.49 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp c790dc29-510a-44c4-9754-0b53eb2d62ee)) - (fp_line (start 0 0) (end 2.54 0) - (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp f4469cae-83d4-4671-b3dc-cb8150bebbad)) - (fp_circle (center 0 0) (end 0.8 0) - (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp b74a22cd-66c2-4c85-880a-37aa0029f00d)) - (pad "1" thru_hole circle (at 0 0) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 19 "Net-(IC1-Pad6)") (pintype "passive") (tstamp da6cefdd-c164-40fc-a51f-ab348ab92b0d)) - (pad "2" thru_hole oval (at 2.54 0) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 5 "Net-(C3-Pad2)") (pintype "passive") (tstamp ebbe8870-7fc2-4ceb-a65c-5a2171f4d779)) - (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - - (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") - (tstamp 215dd88a-87ca-494a-a87e-9f2137eb8bcb) - (at 64.48 102.82) - (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") - (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Resistor") - (property "ki_keywords" "R res resistor") - (path "/6a141024-0740-4682-ac78-fa29ac380bd3") - (attr through_hole) - (fp_text reference "R19" (at 0.233664 1.740277) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp ddc6f61c-6d94-4c10-842f-360fa502ecc1) - ) - (fp_text value "2.2K" (at 1.27 1.92) (layer "F.Fab") hide - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 1a7f7eb1-dc25-43f1-83ad-59d882f47eae) - ) - (fp_line (start 0.92 0) (end 1.54 0) - (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp badeb390-6d53-466d-aff9-81bbf6da38ad)) - (fp_circle (center 0 0) (end 0.92 0) - (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp 029a0e5e-e7ae-492b-9ff2-574de22461f3)) - (fp_line (start -1.05 -1.05) (end -1.05 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp ec7c247d-f86f-4a08-91b3-cfc88f4bd7e4)) - (fp_line (start -1.05 1.05) (end 3.49 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 2e918e54-78e1-4f97-b913-94819b0bc914)) - (fp_line (start 3.49 -1.05) (end -1.05 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 88b9d459-fa74-4bd5-bc3f-c86be236b777)) - (fp_line (start 3.49 1.05) (end 3.49 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 90b908c0-79fd-40ee-a14a-8228f512fcbb)) - (fp_line (start 0 0) (end 2.54 0) - (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp a8c0ac93-33c2-4363-b797-c90d50793cf1)) - (fp_circle (center 0 0) (end 0.8 0) - (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp d58f5538-ec1a-44e2-8b3e-c6c7cd130711)) - (pad "1" thru_hole circle (at 0 0) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 21 "Net-(IC2-Pad3)") (pintype "passive") (tstamp 172ce72e-ccd7-4e6f-bf49-9c982af2f8a7)) - (pad "2" thru_hole oval (at 2.54 0) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 22 "Net-(IC2-Pad6)") (pintype "passive") (tstamp 67d6f75c-3cb3-40df-9475-99436f887263)) - (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - - (footprint "C47u35v:CAPPRD200W50D525H1250" (layer "F.Cu") - (tstamp 32127b65-24cd-4624-9ae5-38653049c6fb) - (at 67.02 110.44) - (descr "5*11") - (tags "Capacitor Polarised") - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Polarized capacitor") - (property "ki_keywords" "cap capacitor") - (path "/26f9efc1-f18f-46a4-a4e0-fd7b825b179e") - (attr through_hole) - (fp_text reference "C12" (at 0.961795 3.86902) (layer "F.SilkS") - (effects (font (size 1.27 1.27) (thickness 0.254))) - (tstamp a9957f41-43ff-475f-89a8-e195d0a1f43f) - ) - (fp_text value "47uF 35v" (at 0 0) (layer "F.SilkS") hide - (effects (font (size 1.27 1.27) (thickness 0.254))) - (tstamp e51d3d8e-d78e-45d0-85c2-d3ba4279a56f) - ) - (fp_circle (center 1 0) (end 1 2.625) - (stroke (width 0.2) (type solid)) (fill none) (layer "F.SilkS") (tstamp 2bb7e679-2791-4f57-9c61-cfc474e0e80f)) - (fp_circle (center 1 0) (end 1 2.625) - (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 19d2fcb9-ae5f-425b-bc59-e96493cb05dd)) - (pad "1" thru_hole rect (at 0 0) (size 1.1 1.1) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 15 "Net-(C12-Pad1)") (pintype "passive") (tstamp c725d7fb-d2d8-4859-8e5e-0d3cd4be4321)) - (pad "2" thru_hole circle (at 2 0) (size 1.1 1.1) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 4 "GND") (pintype "passive") (tstamp 310bfc25-4982-4fe7-aa75-f08bb0a76949)) - (model "UVZ1V470MDD1TA.stp" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - - (footprint "C47u63v:CAPPRD350W65D800H1250" (layer "F.Cu") - (tstamp 37069337-d408-4d28-ac1d-b25de44e20ba) - (at 63.52 135.84) - (descr "EEU-EB1J470SJ-1") - (tags "Capacitor Polarised") - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Polarized capacitor") - (property "ki_keywords" "cap capacitor") - (path "/388d7ed8-52d9-442b-b762-60006c60c529") - (attr through_hole) - (fp_text reference "C11" (at 1.709261 2.164442) (layer "F.SilkS") - (effects (font (size 1.27 1.27) (thickness 0.254))) - (tstamp efeb1898-966a-4c7b-ac2d-f79e09f509ca) - ) - (fp_text value "47uF 63v" (at 0 0) (layer "F.SilkS") hide - (effects (font (size 1.27 1.27) (thickness 0.254))) - (tstamp c4b08a4f-d1f7-4276-99d8-74f1dea09338) - ) - (fp_circle (center 1.75 0) (end 1.75 4) - (stroke (width 0.2) (type solid)) (fill none) (layer "F.SilkS") (tstamp bd041b97-4b7b-4601-a3e6-92cb52905170)) - (fp_circle (center 1.75 0) (end 1.75 4) - (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 2a90a626-31fc-44ea-973c-68f14242f186)) - (pad "1" thru_hole rect (at 0 0) (size 1.275 1.275) (drill 0.85) (layers "*.Cu" "*.Mask") - (net 13 "Net-(C11-Pad1)") (pintype "passive") (tstamp a87da594-d52e-48a4-9306-98eccacfff4f)) - (pad "2" thru_hole circle (at 3.5 0) (size 1.275 1.275) (drill 0.85) (layers "*.Cu" "*.Mask") - (net 14 "Net-(C11-Pad2)") (pintype "passive") (tstamp e2005726-d1f9-4de6-a5ac-fea150879263)) - (model "EEU-EB1J470SJ.stp" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - - (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") - (tstamp 3edb5673-b873-4087-ac88-b8b0ecba1c97) - (at 61.94 120.6 -90) - (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") - (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Resistor") - (property "ki_keywords" "R res resistor") - (path "/22c624a2-9c69-4937-8b4e-0e03aaaaa038") - (attr through_hole) - (fp_text reference "R14" (at 2.965707 -2.432316) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 2bbcab44-528c-4516-b9a6-48c027d9a8ec) - ) - (fp_text value "2.2K" (at 1.27 1.92 90) (layer "F.Fab") hide - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 8d796ea7-ed94-4592-8a98-dd6460c51c59) - ) - (fp_line (start 0.92 0) (end 1.54 0) - (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 3b102618-2d75-4f74-b80d-3a5c015423b2)) - (fp_circle (center 0 0) (end 0.92 0) - (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp 079cee2c-a811-4792-b517-17f45a894a3d)) - (fp_line (start -1.05 -1.05) (end -1.05 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 491cdf89-6ee8-42c3-8c68-9bc522986db6)) - (fp_line (start -1.05 1.05) (end 3.49 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp d27eae09-ea9e-442f-8117-e72b36a13ed9)) - (fp_line (start 3.49 -1.05) (end -1.05 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 65a2bd31-6e08-4daf-b2a8-926623b9f20f)) - (fp_line (start 3.49 1.05) (end 3.49 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 5e4844c5-86c5-438f-8c69-462750e00b78)) - (fp_line (start 0 0) (end 2.54 0) - (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 264d4c99-5502-4860-8c6b-357e5045764d)) - (fp_circle (center 0 0) (end 0.8 0) - (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp a0cbd4b8-6f2f-497a-89c6-30f41cc9e073)) - (pad "1" thru_hole circle (at 0 0 270) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 10 "Net-(D2-K)") (pintype "passive") (tstamp 1c7dc787-e6e2-4ec7-aef7-b2c6000765ae)) - (pad "2" thru_hole oval (at 2.54 0 270) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 13 "Net-(C11-Pad1)") (pintype "passive") (tstamp 4a9a71a1-6087-485e-9dc3-e78a801a3398)) - (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - - (footprint "C47u35v:CAPPRD200W50D525H1250" (layer "F.Cu") - (tstamp 50645cf4-8007-4d77-8b63-fabebd482d62) - (at 67.02 125.68 -90) - (descr "5*11") - (tags "Capacitor Polarised") - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Polarized capacitor") - (property "ki_keywords" "cap capacitor") - (path "/d1189f40-af74-4922-94ba-fe238cf5f19c") - (attr through_hole) - (fp_text reference "C9" (at 4.880074 -0.70564) (layer "F.SilkS") - (effects (font (size 1.27 1.27) (thickness 0.254))) - (tstamp 2f9ed1ec-bcd5-45c0-bc46-ad72b6dad5fd) - ) - (fp_text value "47uF 35v" (at 0 0 90) (layer "F.SilkS") hide - (effects (font (size 1.27 1.27) (thickness 0.254))) - (tstamp b9bbc8b6-bb07-4c49-bb9e-eab0a2a1f3d2) - ) - (fp_circle (center 1 0) (end 1 2.625) - (stroke (width 0.2) (type solid)) (fill none) (layer "F.SilkS") (tstamp 6d3a5cb2-9489-47a6-ab4b-8dc365dfe226)) - (fp_circle (center 1 0) (end 1 2.625) - (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 60b9f829-6311-43f3-8287-1f07964f8e58)) - (pad "1" thru_hole rect (at 0 0 270) (size 1.1 1.1) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 10 "Net-(D2-K)") (pintype "passive") (tstamp 7814e902-3d2d-49e5-b4f5-82be6ebcebcf)) - (pad "2" thru_hole circle (at 2 0 270) (size 1.1 1.1) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 4 "GND") (pintype "passive") (tstamp 890ff405-654c-4d9f-93c2-0580d00c0ea5)) - (model "UVZ1V470MDD1TA.stp" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - - (footprint "R1Go:RESAD1650W70L650D250" (layer "F.Cu") - (tstamp 5104b3e0-c4fe-42eb-b101-ccee056fc4c4) - (at 53.69 82.5) - (descr "RGP0207CHK1G0") - (tags "Resistor") - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Resistor") - (property "ki_keywords" "R res resistor") - (path "/621df7af-eee1-4ba7-b334-c8f75f6a97e7") - (attr through_hole) - (fp_text reference "R20" (at 0.63 2.54) (layer "F.SilkS") - (effects (font (size 1.27 1.27) (thickness 0.254))) - (tstamp 8746d88e-59dc-4699-a145-8bad2f20e0fa) - ) - (fp_text value "1G" (at 0 0) (layer "F.SilkS") hide - (effects (font (size 1.27 1.27) (thickness 0.254))) - (tstamp a6e656f8-7716-4972-9d0a-6918430baeba) - ) - (fp_text user "${REFERENCE}" (at 0.63 2.54) (layer "F.Fab") - (effects (font (size 1.27 1.27) (thickness 0.254))) - (tstamp 74ea7ca2-74ae-44c5-9190-0627748c8b38) - ) - (fp_line (start 1.025 0) (end 5 0) - (stroke (width 0.2) (type solid)) (layer "F.SilkS") (tstamp 378094dc-27db-4b38-a5ba-28d82dfc0369)) - (fp_line (start 5 -1.25) (end 11.5 -1.25) - (stroke (width 0.2) (type solid)) (layer "F.SilkS") (tstamp a7748322-8c5f-46cf-bd37-2fb01db21bc6)) - (fp_line (start 5 1.25) (end 5 -1.25) - (stroke (width 0.2) (type solid)) (layer "F.SilkS") (tstamp e286f56c-b764-4fd8-947f-4c9064d1f136)) - (fp_line (start 11.5 -1.25) (end 11.5 1.25) - (stroke (width 0.2) (type solid)) (layer "F.SilkS") (tstamp 203edae9-b058-41e0-b169-692f5c9b4aca)) - (fp_line (start 11.5 0) (end 15.475 0) - (stroke (width 0.2) (type solid)) (layer "F.SilkS") (tstamp 1e7d0371-3bb0-4b3c-a1e8-f3f81afd40de)) - (fp_line (start 11.5 1.25) (end 5 1.25) - (stroke (width 0.2) (type solid)) (layer "F.SilkS") (tstamp 30941456-c4ee-4b5e-b2a0-dba0876787fb)) - (fp_line (start -0.925 -1.6) (end 17.425 -1.6) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 19e24384-4dc9-40f5-8b69-52afb8de8277)) - (fp_line (start -0.925 1.6) (end -0.925 -1.6) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 7921c54e-03fb-4873-a717-2904fdbc97cb)) - (fp_line (start 17.425 -1.6) (end 17.425 1.6) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp ff470143-b351-4dfe-866b-679817ca38bf)) - (fp_line (start 17.425 1.6) (end -0.925 1.6) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 9e8c624d-a666-4c46-aa6e-6d4117680901)) - (fp_line (start 0 0) (end 5 0) - (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp c9f22a6b-a010-4287-b248-6f1073552a37)) - (fp_line (start 5 -1.25) (end 11.5 -1.25) - (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp da0902d6-d4e7-4c5d-bd67-265ab1567f54)) - (fp_line (start 5 1.25) (end 5 -1.25) - (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 1eeb6b7e-98df-4357-86ac-9b6e40ecf6b6)) - (fp_line (start 11.5 -1.25) (end 11.5 1.25) - (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 884f6c53-b78a-49f4-82af-2883729a7adc)) - (fp_line (start 11.5 0) (end 16.5 0) - (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 7ddb31ac-1194-4c0c-90da-e6b149bfa01c)) - (fp_line (start 11.5 1.25) (end 5 1.25) - (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp e241adbb-49a6-4f7e-8e6b-fa858c0f5cff)) - (pad "1" thru_hole circle (at 0 0) (size 1.35 1.35) (drill 0.9) (layers "*.Cu" "*.Mask") - (net 15 "Net-(C12-Pad1)") (pintype "passive") (tstamp 9158f69c-9a15-4931-8b93-4d1366aea86c)) - (pad "2" thru_hole circle (at 16.5 0) (size 1.35 1.35) (drill 0.9) (layers "*.Cu" "*.Mask") - (net 20 "Net-(SGNL_B1-Pin_1)") (pintype "passive") (tstamp a3912331-601a-47cb-ac46-8d8144f6a5d9)) - (model "RGP0207CHK1G0.stp" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - - (footprint "R1Go:RESAD1650W70L650D250" (layer "F.Cu") - (tstamp 511ee32a-67bc-40fe-a005-09ae35c9667b) - (at 74.01 82.5) - (descr "RGP0207CHK1G0") - (tags "Resistor") - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Resistor") - (property "ki_keywords" "R res resistor") - (path "/a3724ff5-8cb6-46d0-b421-63da8a253dc7") - (attr through_hole) - (fp_text reference "R10" (at 0.63 2.54) (layer "F.SilkS") - (effects (font (size 1.27 1.27) (thickness 0.254))) - (tstamp c5c81eb8-6711-43b2-acad-eaf5c7b879c4) - ) - (fp_text value "1G" (at 0 0) (layer "F.SilkS") hide - (effects (font (size 1.27 1.27) (thickness 0.254))) - (tstamp f086b580-57d9-468f-aec6-1963fefd2be1) - ) - (fp_text user "${REFERENCE}" (at 0.63 2.54) (layer "F.Fab") - (effects (font (size 1.27 1.27) (thickness 0.254))) - (tstamp ed575cdb-9053-46a4-9d34-fada42a46b08) - ) - (fp_line (start 1.025 0) (end 5 0) - (stroke (width 0.2) (type solid)) (layer "F.SilkS") (tstamp 7974632e-a7fd-4dc4-9022-ae21568dfdab)) - (fp_line (start 5 -1.25) (end 11.5 -1.25) - (stroke (width 0.2) (type solid)) (layer "F.SilkS") (tstamp a44bb3d9-77ad-4599-8e80-ffc9ced10332)) - (fp_line (start 5 1.25) (end 5 -1.25) - (stroke (width 0.2) (type solid)) (layer "F.SilkS") (tstamp 32b03cd3-00fb-43a8-855c-2e5ad844592a)) - (fp_line (start 11.5 -1.25) (end 11.5 1.25) - (stroke (width 0.2) (type solid)) (layer "F.SilkS") (tstamp a6c1952d-ad17-424d-a8c5-4df6ea8c9b9b)) - (fp_line (start 11.5 0) (end 15.475 0) - (stroke (width 0.2) (type solid)) (layer "F.SilkS") (tstamp 82205807-5925-4f22-96ef-e7caca865b65)) - (fp_line (start 11.5 1.25) (end 5 1.25) - (stroke (width 0.2) (type solid)) (layer "F.SilkS") (tstamp 86954dfc-743d-4881-bd42-406c34e21c4f)) - (fp_line (start -0.925 -1.6) (end 17.425 -1.6) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp d3fd7d17-fe9e-4786-956c-d9870573d16c)) - (fp_line (start -0.925 1.6) (end -0.925 -1.6) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 37224075-86d9-47bc-bb9e-f92cfa8ef84d)) - (fp_line (start 17.425 -1.6) (end 17.425 1.6) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 24c753d4-741a-4583-bd3a-0ee3208172f5)) - (fp_line (start 17.425 1.6) (end -0.925 1.6) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 29087955-a82b-41e7-995f-f2a0581adb29)) - (fp_line (start 0 0) (end 5 0) - (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 2b4d77e4-d8a8-4c5e-8348-2e3891df195a)) - (fp_line (start 5 -1.25) (end 11.5 -1.25) - (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 480e923f-3c25-45d7-944a-0b387355e824)) - (fp_line (start 5 1.25) (end 5 -1.25) - (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 6c18156c-8a98-4a5a-ab8f-771fbaa32118)) - (fp_line (start 11.5 -1.25) (end 11.5 1.25) - (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp bdfcedcd-4d2c-40b2-a92d-35551a10a6af)) - (fp_line (start 11.5 0) (end 16.5 0) - (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp e5ce0a63-afee-4f28-94fd-12186d2e3684)) - (fp_line (start 11.5 1.25) (end 5 1.25) - (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp f87dc0cb-5eeb-4b58-94b8-3792883479d8)) - (pad "1" thru_hole circle (at 0 0) (size 1.35 1.35) (drill 0.9) (layers "*.Cu" "*.Mask") - (net 8 "Net-(C5-Pad1)") (pintype "passive") (tstamp 5a6c052a-d6ea-460b-984d-29426d71e7ea)) - (pad "2" thru_hole circle (at 16.5 0) (size 1.35 1.35) (drill 0.9) (layers "*.Cu" "*.Mask") - (net 17 "Net-(SGNL_A1-Pin_1)") (pintype "passive") (tstamp 1fecd301-41d2-4f17-8241-372746319e52)) - (model "RGP0207CHK1G0.stp" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - - (footprint "C47u63v:CAPPRD350W65D800H1250" (layer "F.Cu") - (tstamp 57f1cd55-3f2c-438f-b4c2-4f5d150ecffc) - (at 77.18 135.84) - (descr "EEU-EB1J470SJ-1") - (tags "Capacitor Polarised") - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Polarized capacitor") - (property "ki_keywords" "cap capacitor") - (path "/225d2ae8-3230-4005-a4b4-2094ff960f52") - (attr through_hole) - (fp_text reference "C4" (at 1.91582 2.097292) (layer "F.SilkS") - (effects (font (size 1.27 1.27) (thickness 0.254))) - (tstamp 82096ada-3ded-44cf-bd75-8959c327a174) - ) - (fp_text value "47uF 63v" (at 0 0) (layer "F.SilkS") hide - (effects (font (size 1.27 1.27) (thickness 0.254))) - (tstamp 5ad46f85-f25b-4bd1-82ed-795913f1666d) - ) - (fp_circle (center 1.75 0) (end 1.75 4) - (stroke (width 0.2) (type solid)) (fill none) (layer "F.SilkS") (tstamp d4102372-978f-42a1-a90d-41d236206e20)) - (fp_circle (center 1.75 0) (end 1.75 4) - (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 7787f7ca-8876-47c6-bb05-6c14aebedc41)) - (pad "1" thru_hole rect (at 0 0) (size 1.275 1.275) (drill 0.85) (layers "*.Cu" "*.Mask") - (net 6 "Net-(C4-Pad1)") (pintype "passive") (tstamp a6779f9f-6a23-40bc-961e-0b8261bdce78)) - (pad "2" thru_hole circle (at 3.5 0) (size 1.275 1.275) (drill 0.85) (layers "*.Cu" "*.Mask") - (net 7 "Net-(C4-Pad2)") (pintype "passive") (tstamp 7f2ab19a-976a-456a-8fad-601874d85423)) - (model "EEU-EB1J470SJ.stp" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - - (footprint "Library:conn_holepad" (layer "F.Cu") - (tstamp 5e40555e-2a89-4573-9a30-23f8a46b86ad) - (at 61.94 156.16) - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Generic connector, single row, 01x01, script generated") - (property "ki_keywords" "connector") - (path "/cb6e0e92-8106-4918-9d8c-3e3013d6e7e1") - (attr through_hole) - (fp_text reference "X3B1" (at 0.016458 2.494589 unlocked) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.1))) - (tstamp 30a5f286-250d-4a3c-9f3a-4f3ed4a1e0fa) - ) - (fp_text value "Conn_01x01_Pin" (at 0 1 unlocked) (layer "F.Fab") hide - (effects (font (size 1 1) (thickness 0.15))) - (tstamp b6432240-0ae5-4008-b659-2d7da56c7894) - ) - (fp_text user "${REFERENCE}" (at 0 2.5 unlocked) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 99f21f5f-21c1-4ef8-a0c8-a5a1b720aba9) - ) - (pad "1" thru_hole circle (at 0 0) (size 3 3) (drill 1.5) (layers "*.Cu" "*.Mask") - (net 25 "Net-(X3B1-Pin_1)") (pinfunction "Pin_1") (pintype "passive") (tstamp abdbdf51-9f1a-417f-a17c-6991518f0831)) - ) - - (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") - (tstamp 6a95d45f-4519-4910-bd01-b4336f829f93) - (at 61.94 128.22 -90) - (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") - (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Resistor") - (property "ki_keywords" "R res resistor") - (path "/9a83ce8c-c4ea-4707-8978-a44f631e4fc0") - (attr through_hole) - (fp_text reference "R12" (at 2.915049 -2.449104 -180) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 95885942-92e5-4336-add5-a2ba35600eff) - ) - (fp_text value "47" (at 1.27 1.92 -90) (layer "F.Fab") hide - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 7556e769-713c-42b0-8e52-81caf6b8a4ed) - ) - (fp_line (start 0.92 0) (end 1.54 0) - (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 88f7a153-3c40-4d8d-8e04-42edb8032c01)) - (fp_circle (center 0 0) (end 0.92 0) - (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp ad112007-8408-4e1d-a96b-c679b440039a)) - (fp_line (start -1.05 -1.05) (end -1.05 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 4381bf1e-59cb-4e33-8f51-6396028cb0ab)) - (fp_line (start -1.05 1.05) (end 3.49 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp ac8679ee-a570-4285-beaf-41b481358ff8)) - (fp_line (start 3.49 -1.05) (end -1.05 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp cd2728a6-cbf9-4086-93a2-472dd5bec58e)) - (fp_line (start 3.49 1.05) (end 3.49 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp f2727568-393a-4706-9c58-a6867848526d)) - (fp_line (start 0 0) (end 2.54 0) - (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 814bee79-5ee9-491c-b583-6ba5c17fdf16)) - (fp_circle (center 0 0) (end 0.8 0) - (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 316744c1-0e96-4874-b09f-28721d28a9c5)) - (pad "1" thru_hole circle (at 0 0 270) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 13 "Net-(C11-Pad1)") (pintype "passive") (tstamp cb6ccae2-58ed-4069-aacb-cc35c7c95063)) - (pad "2" thru_hole oval (at 2.54 0 270) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 26 "Net-(X2B1-Pin_1)") (pintype "passive") (tstamp b0c91d99-9800-421c-83ad-05b0c7bcde76)) - (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - - (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") - (tstamp 70727d25-e90e-4f97-a2c4-19ef1c2db17a) - (at 82.26 95.2) - (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") - (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Resistor") - (property "ki_keywords" "R res resistor") - (path "/6bc81894-9db7-4be7-a876-2de954b2e8d4") - (attr through_hole) - (fp_text reference "R8" (at -0.258837 1.734976) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 3e611c63-801e-46e9-86f7-ddc50e28500a) - ) - (fp_text value "47K" (at 1.27 1.92) (layer "F.Fab") hide - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 8ab7a06b-c99d-4344-948a-c34e639a1293) - ) - (fp_line (start 0.92 0) (end 1.54 0) - (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 72332f31-d254-4b7d-bb98-67a3ecf53cd0)) - (fp_circle (center 0 0) (end 0.92 0) - (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp dbb33cd9-018e-4d7b-ae36-e97d83a18f0b)) - (fp_line (start -1.05 -1.05) (end -1.05 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 5bfa8fa6-e47f-429e-9267-97501f54c005)) - (fp_line (start -1.05 1.05) (end 3.49 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp e63217f6-e95c-4d83-9128-5fe2bf0307fe)) - (fp_line (start 3.49 -1.05) (end -1.05 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 26fd6a13-7c19-4e62-a717-28d9800c7e52)) - (fp_line (start 3.49 1.05) (end 3.49 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 59cdf935-d918-4629-9a24-844a65b45ce3)) - (fp_line (start 0 0) (end 2.54 0) - (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 75949e46-71ae-42a3-bdbf-6acf6818cd0a)) - (fp_circle (center 0 0) (end 0.8 0) - (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp d3e61387-093f-4be7-b181-0b4c0a3edeb9)) - (pad "1" thru_hole circle (at 0 0) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 9 "Net-(VCC_A2-Pin_1)") (pintype "passive") (tstamp f7a268ac-3442-4517-a027-1ae5bc623840)) - (pad "2" thru_hole oval (at 2.54 0) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 8 "Net-(C5-Pad1)") (pintype "passive") (tstamp 15440508-6b49-427a-94cd-13d5773a99f4)) - (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - - (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") - (tstamp 745fa253-fc6b-4da8-b153-6b4fca625b32) - (at 82.26 128.22 -90) - (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") - (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Resistor") - (property "ki_keywords" "R res resistor") - (path "/e7bc09ca-c05b-46b5-a6ac-36183d8d76a3") - (attr through_hole) - (fp_text reference "R2" (at 2.958884 -1.980753 -180) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp a517cc3f-6e9e-4271-a99a-07a6f04e0cdb) - ) - (fp_text value "47" (at 1.27 1.92 -90) (layer "F.Fab") hide - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 2daa1a04-b9c4-46f5-af0b-171fd3490c07) - ) - (fp_line (start 0.92 0) (end 1.54 0) - (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp c3741035-4127-46ee-b322-d339618cd69f)) - (fp_circle (center 0 0) (end 0.92 0) - (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp e3823e06-9efd-4f4e-8ee5-47273c5b42e1)) - (fp_line (start -1.05 -1.05) (end -1.05 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 79c9ebfb-7e18-4f6d-8309-5deb5e77e1e2)) - (fp_line (start -1.05 1.05) (end 3.49 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 21cbafd0-bc53-4dab-acba-c038266db131)) - (fp_line (start 3.49 -1.05) (end -1.05 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 49ffcd0c-9ae3-42bd-a1ea-1e54a66a97fd)) - (fp_line (start 3.49 1.05) (end 3.49 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 34f5eceb-df9b-434b-a7f0-4b41a05c335c)) - (fp_line (start 0 0) (end 2.54 0) - (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 6d6641b2-49aa-4349-ba42-f60171ef5ef6)) - (fp_circle (center 0 0) (end 0.8 0) - (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp afa9d047-e99c-4bc6-b3b5-01d5d442aba0)) - (pad "1" thru_hole circle (at 0 0 270) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 6 "Net-(C4-Pad1)") (pintype "passive") (tstamp e1b10bd0-8cab-4414-aaf4-14cf087e9d4e)) - (pad "2" thru_hole oval (at 2.54 0 270) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 24 "Net-(X2A1-Pin_1)") (pintype "passive") (tstamp e6729b8e-23fe-4d05-9615-7ca7671bf626)) - (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - - (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") - (tstamp 7472e516-6d6f-42aa-aff0-409e97b9c722) - (at 82.26 115.52 90) - (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") - (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "Sim.Device" "D") - (property "Sim.Pins" "1=K 2=A") - (property "ki_description" "Diode") - (property "ki_keywords" "diode") - (path "/04786958-d145-4302-af4f-030967ac2a8a") - (attr through_hole) - (fp_text reference "D1" (at -0.564033 2.014328) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp ffd6cd47-439a-4bbe-9753-dd65d13040da) - ) - (fp_text value "12V" (at 1.27 1.92 90) (layer "F.Fab") hide - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 752cf63f-5d23-4dc4-817a-a293d9be6234) - ) - (fp_line (start 0.92 0) (end 1.54 0) - (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 0224cf19-064c-494b-82b4-98171a22933e)) - (fp_circle (center 0 0) (end 0.92 0) - (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp 993e43d6-d0ab-428f-85bc-ae5bcf149a49)) - (fp_line (start -1.05 -1.05) (end -1.05 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp abb9a96d-08a8-46e6-a1f1-b0846347ca6a)) - (fp_line (start -1.05 1.05) (end 3.49 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 92183174-45ed-4b2a-b139-5ac7bf3b7546)) - (fp_line (start 3.49 -1.05) (end -1.05 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 46cac06e-fab6-4272-9732-bfad65d29f81)) - (fp_line (start 3.49 1.05) (end 3.49 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp b1c35bab-a00e-4782-a36b-79e79e988f5d)) - (fp_line (start 0 0) (end 2.54 0) - (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 2919f9e8-6ec9-4b2a-ba3a-c916e973035b)) - (fp_circle (center 0 0) (end 0.8 0) - (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp eb481af8-d85c-4ce6-a652-43b00abdcc39)) - (pad "1" thru_hole circle (at 0 0 90) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 1 "Net-(D1-K)") (pinfunction "K") (pintype "passive") (tstamp 4588228a-a974-4b52-afde-3bd24b303adf)) - (pad "2" thru_hole oval (at 2.54 0 90) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 4 "GND") (pinfunction "A") (pintype "passive") (tstamp 73e20179-02ea-4a65-9a4f-0a706a4c9c9d)) - (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - - (footprint "C.022uF50v:K223K15X7RF5UL2" (layer "F.Cu") - (tstamp 777a2a11-51b6-4ba0-a284-b026e2b2353a) - (at 84.8 90.12 90) - (descr "K223K15X7RF5UL2-1") - (tags "Capacitor") - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Unpolarized capacitor") - (property "ki_keywords" "cap capacitor") - (path "/57c290cf-4a3a-4689-a5cc-79dd666271df") - (attr through_hole) - (fp_text reference "C6" (at -2.218904 -0.082977 180) (layer "F.SilkS") - (effects (font (size 1.27 1.27) (thickness 0.254))) - (tstamp a4f65e3a-dbd2-44a3-b1c5-9975be850695) - ) - (fp_text value "0.1uF" (at 1.25 0 90) (layer "F.SilkS") hide - (effects (font (size 1.27 1.27) (thickness 0.254))) - (tstamp f867c9ac-9208-4dae-b13e-f7a83fbe91a4) - ) - (fp_line (start -0.75 -1.3) (end 3.25 -1.3) - (stroke (width 0.1) (type solid)) (layer "F.SilkS") (tstamp d40b2379-d455-462c-a1b7-0a8450946868)) - (fp_line (start -0.75 -1) (end -0.75 -1.3) - (stroke (width 0.1) (type solid)) (layer "F.SilkS") (tstamp 0d4bd84a-5607-45fb-87fb-139520d7a0f1)) - (fp_line (start -0.75 1) (end -0.75 1.3) - (stroke (width 0.1) (type solid)) (layer "F.SilkS") (tstamp bcbb11f6-f2b2-494c-8850-cf4b4f829176)) - (fp_line (start -0.75 1.3) (end 3.25 1.3) - (stroke (width 0.1) (type solid)) (layer "F.SilkS") (tstamp 6b001352-3195-4298-baa5-3df16eb94116)) - (fp_line (start 3.25 -1.3) (end 3.25 -1) - (stroke (width 0.1) (type solid)) (layer "F.SilkS") (tstamp a475d7c7-8820-4801-af00-0fcbcca38990)) - (fp_line (start 3.25 1.3) (end 3.25 1) - (stroke (width 0.1) (type solid)) (layer "F.SilkS") (tstamp 59319f7d-fe92-451d-990d-363cbca24416)) - (fp_line (start -1.25 -1.8) (end 3.75 -1.8) - (stroke (width 0.1) (type solid)) (layer "F.CrtYd") (tstamp 7baec531-e6a6-458b-a317-1988ff17822e)) - (fp_line (start -1.25 1.8) (end -1.25 -1.8) - (stroke (width 0.1) (type solid)) (layer "F.CrtYd") (tstamp aac5680b-f51b-4db4-b343-1bd513dfea4f)) - (fp_line (start 3.75 -1.8) (end 3.75 1.8) - (stroke (width 0.1) (type solid)) (layer "F.CrtYd") (tstamp c851eff6-5ab5-4129-a309-bbf8c82d7558)) - (fp_line (start 3.75 1.8) (end -1.25 1.8) - (stroke (width 0.1) (type solid)) (layer "F.CrtYd") (tstamp 86f516d8-4335-491f-b766-a3db1be23d8b)) - (fp_line (start -0.75 -1.3) (end 3.25 -1.3) - (stroke (width 0.2) (type solid)) (layer "F.Fab") (tstamp 011e2610-78b5-4cab-96d7-0f99d08a59fa)) - (fp_line (start -0.75 1.3) (end -0.75 -1.3) - (stroke (width 0.2) (type solid)) (layer "F.Fab") (tstamp db2af17f-2eb4-4f2b-b59e-eb5c8504eb43)) - (fp_line (start 3.25 -1.3) (end 3.25 1.3) - (stroke (width 0.2) (type solid)) (layer "F.Fab") (tstamp 83838809-c2f3-4cb0-8c78-517af44e787b)) - (fp_line (start 3.25 1.3) (end -0.75 1.3) - (stroke (width 0.2) (type solid)) (layer "F.Fab") (tstamp c1a01b22-728e-46d6-96ef-30e776faf4fa)) - (pad "1" thru_hole circle (at 0 0 90) (size 1.2 1.2) (drill 0.75) (layers "*.Cu" "*.Mask") - (net 9 "Net-(VCC_A2-Pin_1)") (pintype "passive") (tstamp d2fa98eb-94f3-4395-b54d-d4291f80c27f)) - (pad "2" thru_hole circle (at 2.5 0 90) (size 1.2 1.2) (drill 0.75) (layers "*.Cu" "*.Mask") - (net 2 "Earth") (pintype "passive") (tstamp 448d6ed4-1c1f-4bea-a65e-151ed27dfe57)) - (model "K223K15X7RF5UL2.stp" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - - (footprint "MountingHole:MountingHole_2.7mm_M2.5_ISO14580" (layer "F.Cu") - (tstamp 7f03512d-5430-4f6b-989a-c57dddec5941) - (at 86.495 77.591) - (descr "Mounting Hole 2.7mm, no annular, M2.5, ISO14580") - (tags "mounting hole 2.7mm no annular m2.5 iso14580") - (property "Sheetfile" "StudioMic.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Mounting Hole without connection") - (property "ki_keywords" "mounting hole") - (attr exclude_from_pos_files) - (fp_text reference "H2" (at 0 -3.25) (layer "F.SilkS") hide - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 8c84fe77-0de7-4088-a65e-4dddda1e9add) - ) - (fp_text value "M2.5" (at 0 3.25) (layer "F.Fab") hide - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 8fc6e3fc-39d3-4a90-920b-1879c4c60efe) - ) - (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 88414f96-11bc-4b42-a55b-9c68a12fe7d3) - ) - (fp_circle (center 0 0) (end 2.25 0) - (stroke (width 0.15) (type solid)) (fill none) (layer "Cmts.User") (tstamp 3d8ade6d-3490-4a27-8a42-8c4f9b2b216b)) - (fp_circle (center 0 0) (end 2.5 0) - (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd") (tstamp d740fdd3-3381-4e68-abba-3550b800a4b9)) - (pad "" np_thru_hole oval (at 0 0) (size 3.5 2.7) (drill oval 3.5 2.7) (layers "F&B.Cu" "*.Mask") (tstamp d10210f0-ec59-438e-a0e2-3e35204b58ab)) - ) - - (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") - (tstamp 8222916a-afda-4ca0-9014-a8d49bfd5eca) - (at 77.18 102.82) - (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") - (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Resistor") - (property "ki_keywords" "R res resistor") - (path "/333c6bef-4cf7-4319-b480-a4d554049f1a") - (attr through_hole) - (fp_text reference "R9" (at -0.269833 1.725355) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp fe03fcd1-3a46-4641-b4a4-6271a9c4a05c) - ) - (fp_text value "2.2K" (at 1.27 1.92) (layer "F.Fab") hide - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 3d136940-b473-4bb7-b7fc-a37a3d1f627d) - ) - (fp_line (start 0.92 0) (end 1.54 0) - (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 90ef6fdf-2801-46ca-ad22-7ac678cd6738)) - (fp_circle (center 0 0) (end 0.92 0) - (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp 8c0e6bf2-9834-4387-9f20-62f75692ddea)) - (fp_line (start -1.05 -1.05) (end -1.05 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 5349220a-ce3f-4604-835f-2e97f62acc5d)) - (fp_line (start -1.05 1.05) (end 3.49 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp ba228c7b-fd34-408a-8a2b-4a1c916b760e)) - (fp_line (start 3.49 -1.05) (end -1.05 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp ae8ab25a-71ea-40a8-a5f6-02d2dd7f0a61)) - (fp_line (start 3.49 1.05) (end 3.49 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 63f24955-dcd9-4332-a2a3-07f1e5914fcf)) - (fp_line (start 0 0) (end 2.54 0) - (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp d8c4b57b-464b-4294-82a2-41d2f3cd66d9)) - (fp_circle (center 0 0) (end 0.8 0) - (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp cc1ebe5c-f4c9-4b70-83eb-e60fb874dc79)) - (pad "1" thru_hole circle (at 0 0) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 18 "Net-(IC1-Pad3)") (pintype "passive") (tstamp c150de42-16be-4fdc-853c-5f7149aceb59)) - (pad "2" thru_hole oval (at 2.54 0) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 19 "Net-(IC1-Pad6)") (pintype "passive") (tstamp a513bcd0-e8d2-493e-889c-f7069e4a27f5)) - (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - - (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") - (tstamp 87039480-541e-4ba1-8b4c-becebf7d9ca0) - (at 56.86 115.52 90) - (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") - (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "Sim.Device" "D") - (property "Sim.Pins" "1=K 2=A") - (property "ki_description" "Diode") - (property "ki_keywords" "diode") - (path "/60bb60f7-d540-494b-9a5e-5a737fa70d44") - (attr through_hole) - (fp_text reference "D2" (at -0.591079 1.95189) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 1235d70f-2098-481f-ab42-9da8c8985f0e) - ) - (fp_text value "12V" (at 1.27 1.92 90) (layer "F.Fab") hide - (effects (font (size 1 1) (thickness 0.15))) - (tstamp dc161806-2a08-47ac-aa0b-6d28839e8d72) - ) - (fp_line (start 0.92 0) (end 1.54 0) - (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 0a57cbbb-36e7-49f4-8388-e321f682968c)) - (fp_circle (center 0 0) (end 0.92 0) - (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp b8e79ce5-adc7-42e7-8264-18dfda5ab300)) - (fp_line (start -1.05 -1.05) (end -1.05 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp b8e6d07c-596c-44ef-9bed-c266491f9a4b)) - (fp_line (start -1.05 1.05) (end 3.49 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 5d3b86c5-23ed-4f8d-b4f9-2f0a6f2b5371)) - (fp_line (start 3.49 -1.05) (end -1.05 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 206ed511-f19b-4e42-8589-0130ee9ff6b3)) - (fp_line (start 3.49 1.05) (end 3.49 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 2635a543-dd70-4118-892f-2536c0e2a23a)) - (fp_line (start 0 0) (end 2.54 0) - (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 8a9fb8a9-f82e-421c-9a3d-efda6114a0d6)) - (fp_circle (center 0 0) (end 0.8 0) - (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp c5aa4b15-3a49-4e48-aa4b-93fb9434694b)) - (pad "1" thru_hole circle (at 0 0 90) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 10 "Net-(D2-K)") (pinfunction "K") (pintype "passive") (tstamp 43fb71e1-af97-4bb0-bbba-19e9c758b00f)) - (pad "2" thru_hole oval (at 2.54 0 90) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 4 "GND") (pinfunction "A") (pintype "passive") (tstamp e0afb2aa-fd20-4f27-aa21-405c17a841ad)) - (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - - (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") - (tstamp 88eee050-1f6e-4b7d-956e-b68a6d184d3d) - (at 61.94 105.36 -90) - (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") - (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Resistor") - (property "ki_keywords" "R res resistor") - (path "/ecfd7613-45e7-4949-88b5-f33fd1e3a59e") - (attr through_hole) - (fp_text reference "R15" (at 2.975622 -2.430451) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp e84e0394-33f4-4f73-bb5a-3c497fb44bba) - ) - (fp_text value "200" (at 1.27 1.92 90) (layer "F.Fab") hide - (effects (font (size 1 1) (thickness 0.15))) - (tstamp cc50b4db-f9a4-47e4-9c5a-de4f6b9b372e) - ) - (fp_line (start 0.92 0) (end 1.54 0) - (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp d7889851-719a-4f0e-a5ef-37303f437a10)) - (fp_circle (center 0 0) (end 0.92 0) - (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp cb9c4244-3998-44f5-b623-2c6a639f9c67)) - (fp_line (start -1.05 -1.05) (end -1.05 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp bded68ca-02e0-4891-bc91-9a7efd46d714)) - (fp_line (start -1.05 1.05) (end 3.49 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 363dfcd3-2abe-44cd-a8ae-47046bff7491)) - (fp_line (start 3.49 -1.05) (end -1.05 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 7ca39ae6-a869-4917-9211-de348471e2e5)) - (fp_line (start 3.49 1.05) (end 3.49 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 04dcb482-be1c-4aef-81c7-82e050eceb6f)) - (fp_line (start 0 0) (end 2.54 0) - (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp f9930ee4-73dc-47c3-a61b-6e6ee1265373)) - (fp_circle (center 0 0) (end 0.8 0) - (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 2f2d545f-1858-4dd5-a4ee-e52d44c257b0)) - (pad "1" thru_hole circle (at 0 0 270) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 16 "Net-(VCC_B2-Pin_1)") (pintype "passive") (tstamp c7011c0b-56aa-440b-9bd4-feaddb54374d)) - (pad "2" thru_hole oval (at 2.54 0 270) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 10 "Net-(D2-K)") (pintype "passive") (tstamp c6ab1031-4d70-424e-9213-8ef3496d68ff)) - (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - - (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") - (tstamp 930fb205-d5cd-48f9-a781-9004a9399450) - (at 61.94 115.52 90) - (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") - (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Unpolarized capacitor") - (property "ki_keywords" "cap capacitor") - (path "/0074ef94-0d36-4108-8f14-b1d064783f91") - (attr through_hole) - (fp_text reference "C8" (at -0.613463 1.997704) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 40966c82-ce75-4b79-8949-185ad92092bb) - ) - (fp_text value "0.1uF" (at 1.27 1.92 90) (layer "F.Fab") hide - (effects (font (size 1 1) (thickness 0.15))) - (tstamp d5a5f12a-7151-4e16-9321-d859c322c039) - ) - (fp_line (start 0.92 0) (end 1.54 0) - (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 0d325ce5-9686-46e1-9710-553c86fad016)) - (fp_circle (center 0 0) (end 0.92 0) - (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp 232f966d-1a71-4f43-a9cc-c02258ab6ef5)) - (fp_line (start -1.05 -1.05) (end -1.05 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp e325372f-b4a1-4c37-a40d-a7deb804eba1)) - (fp_line (start -1.05 1.05) (end 3.49 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp f2c5b4b1-2c5c-4bdb-96b1-5b4a00bf5ecf)) - (fp_line (start 3.49 -1.05) (end -1.05 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 6b6605b9-1d95-4609-af46-2b13c6043844)) - (fp_line (start 3.49 1.05) (end 3.49 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 99d0fa06-d55e-4736-a715-055daa0c5d70)) - (fp_line (start 0 0) (end 2.54 0) - (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 417cc6a6-89c8-4f98-853c-cdcde77c0d4c)) - (fp_circle (center 0 0) (end 0.8 0) - (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 246f1a83-7735-4299-904e-687af4cc2121)) - (pad "1" thru_hole circle (at 0 0 90) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 10 "Net-(D2-K)") (pintype "passive") (tstamp 04c2d50b-f84b-4b00-9c08-d75289fd0c43)) - (pad "2" thru_hole oval (at 2.54 0 90) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 4 "GND") (pintype "passive") (tstamp 229161d5-9ab3-4020-8df7-6107acbc7bac)) - (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - - (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") - (tstamp 959d4b1a-fc40-4583-b414-2275fb79e479) - (at 82.26 105.36 -90) - (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") - (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Resistor") - (property "ki_keywords" "R res resistor") - (path "/7f13f25b-68e1-44e1-992e-6e69c71b1400") - (attr through_hole) - (fp_text reference "R5" (at 2.956969 -2.014328 -180) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp e24cc170-5302-456e-aeca-910cb0640507) - ) - (fp_text value "200" (at 1.27 1.92 -90) (layer "F.Fab") hide - (effects (font (size 1 1) (thickness 0.15))) - (tstamp e8289d04-0393-4a67-9ddf-3a5c9d0fa599) - ) - (fp_line (start 0.92 0) (end 1.54 0) - (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp d3f7b3a8-d135-401e-8064-8ad0069d43c9)) - (fp_circle (center 0 0) (end 0.92 0) - (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp 81fe116a-52c3-429f-9aed-1586910c406e)) - (fp_line (start -1.05 -1.05) (end -1.05 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 3b904076-a20d-4b59-ae30-4e3c5d8e3f16)) - (fp_line (start -1.05 1.05) (end 3.49 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 89181fdb-23b4-4ea1-b31e-b0eff898a7d0)) - (fp_line (start 3.49 -1.05) (end -1.05 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp e1f22170-d15b-4801-ac28-f748ddf101ed)) - (fp_line (start 3.49 1.05) (end 3.49 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp bf57fa49-14f5-41f9-9acd-09d4d23a11da)) - (fp_line (start 0 0) (end 2.54 0) - (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp a193c140-1c13-4217-92f5-4ffc95ed767a)) - (fp_circle (center 0 0) (end 0.8 0) - (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 6f5ffd86-4625-4173-8d26-1174d5496705)) - (pad "1" thru_hole circle (at 0 0 270) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 9 "Net-(VCC_A2-Pin_1)") (pintype "passive") (tstamp e8c3d387-00c8-4398-a83a-9365ebf93a43)) - (pad "2" thru_hole oval (at 2.54 0 270) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 1 "Net-(D1-K)") (pintype "passive") (tstamp 58b5a7c0-9f6e-4e46-85bc-5db95e418a01)) - (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - - (footprint "Library:conn_holepad" (layer "F.Cu") - (tstamp 95f3cf11-5e3e-4f4f-ad36-1e7c81240b7f) - (at 82.26 156.16) - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Generic connector, single row, 01x01, script generated") - (property "ki_keywords" "connector") - (path "/caa6c8b8-ee7b-44c3-a728-7e55c5ac92d4") - (attr through_hole) - (fp_text reference "X3A1" (at -0.039043 2.524434 unlocked) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.1))) - (tstamp ca690d1f-83c1-45bb-babc-efa06be639dc) - ) - (fp_text value "Conn_01x01_Pin" (at 0 1 unlocked) (layer "F.Fab") hide - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 42ce4a1a-b352-4d63-86f8-1877213d9cb7) - ) - (fp_text user "${REFERENCE}" (at 0 2.5 unlocked) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 7931f949-744c-4070-b5b9-9141b8124a2d) - ) - (pad "1" thru_hole circle (at 0 0) (size 3 3) (drill 1.5) (layers "*.Cu" "*.Mask") - (net 23 "Net-(X3A1-Pin_1)") (pinfunction "Pin_1") (pintype "passive") (tstamp 1096f159-2fd7-4d0f-8c49-5e8e92f1ac73)) - ) - - (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") - (tstamp 96edd9a0-1961-43b7-abec-2fcd9dc521f8) - (at 59.4 95.2) - (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") - (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Resistor") - (property "ki_keywords" "R res resistor") - (path "/dffbb023-66a6-4908-bab6-7170bcf5a1bb") - (attr through_hole) - (fp_text reference "R18" (at 0.212099 1.734976) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 7d01e317-e30d-4099-9024-f03be67c49ad) - ) - (fp_text value "47K" (at 1.27 1.92) (layer "F.Fab") hide - (effects (font (size 1 1) (thickness 0.15))) - (tstamp ba3fee32-5607-4e2d-8c80-bfa3f4f0643f) - ) - (fp_line (start 0.92 0) (end 1.54 0) - (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 941cde38-2805-4446-8659-7045ce2defdd)) - (fp_circle (center 0 0) (end 0.92 0) - (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp 96c32c3a-b018-4d93-b5ef-63127a8581b0)) - (fp_line (start -1.05 -1.05) (end -1.05 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp a9870692-2cf2-4816-a3ce-64f6e44ef8b0)) - (fp_line (start -1.05 1.05) (end 3.49 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 96852ad8-6479-4d59-bfd7-b9e66893bda7)) - (fp_line (start 3.49 -1.05) (end -1.05 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp cd907c6f-df83-4fdd-81e6-e955798d3470)) - (fp_line (start 3.49 1.05) (end 3.49 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp a04fad82-1cc8-49f3-896a-f04b357b4557)) - (fp_line (start 0 0) (end 2.54 0) - (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 3734aed0-0cae-4a81-b5c7-2adecc43f460)) - (fp_circle (center 0 0) (end 0.8 0) - (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 0b6fa5b7-9028-41fe-b3b1-d74fb8700b63)) - (pad "1" thru_hole circle (at 0 0) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 16 "Net-(VCC_B2-Pin_1)") (pintype "passive") (tstamp 1ba822b9-917a-43c2-b3f6-8db9cb7ec407)) - (pad "2" thru_hole oval (at 2.54 0) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 15 "Net-(C12-Pad1)") (pintype "passive") (tstamp 26895040-bb44-4da7-8f1e-68bb588e3ee6)) - (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - - (footprint "C47u35v:CAPPRD200W50D525H1250" (layer "F.Cu") - (tstamp 99197f4c-2fe4-4089-b0fa-e89e30d9edc8) - (at 77.18 118.06 -90) - (descr "5*11") - (tags "Capacitor Polarised") - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Polarized capacitor") - (property "ki_keywords" "cap capacitor") - (path "/e99cf364-578f-476c-924e-844a1b1a8e85") - (attr through_hole) - (fp_text reference "C7" (at 4.844928 -0.6182) (layer "F.SilkS") - (effects (font (size 1.27 1.27) (thickness 0.254))) - (tstamp 86e5d921-e8e0-493b-83a4-fb49f4fa5c56) - ) - (fp_text value "47uF 35v" (at 0 0 90) (layer "F.SilkS") hide - (effects (font (size 1.27 1.27) (thickness 0.254))) - (tstamp f2ac2ce7-3672-4776-87b3-bc13e8c293dc) - ) - (fp_circle (center 1 0) (end 1 2.625) - (stroke (width 0.2) (type solid)) (fill none) (layer "F.SilkS") (tstamp f17d0654-baf1-43be-a44a-a8e29655dd2b)) - (fp_circle (center 1 0) (end 1 2.625) - (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 08ee4e0f-41a8-4ecd-aed7-39440055cbe5)) - (pad "1" thru_hole rect (at 0 0 270) (size 1.1 1.1) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 9 "Net-(VCC_A2-Pin_1)") (pintype "passive") (tstamp 465c2404-a3dd-4ed4-8c70-900027804e71)) - (pad "2" thru_hole circle (at 2 0 270) (size 1.1 1.1) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 2 "Earth") (pintype "passive") (tstamp 06f032a5-26c0-4697-afaf-b621b86d80b4)) - (model "UVZ1V470MDD1TA.stp" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - - (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") - (tstamp 99c3b2dd-1fe3-41c8-bfa0-f729178fe195) - (at 89.88 90.12 90) - (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") - (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Resistor") - (property "ki_keywords" "R res resistor") - (path "/9073f975-3395-426e-a26b-e4f39deda04a") - (attr through_hole) - (fp_text reference "R7" (at -1.860768 -0.044624) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 692d2aa6-91ed-4927-ac36-d095b976a9dc) - ) - (fp_text value "47K" (at 1.27 1.92 90) (layer "F.Fab") hide - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 188217de-9e22-4812-8857-52b8ed838eee) - ) - (fp_line (start 0.92 0) (end 1.54 0) - (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 391657fd-92d7-4fd2-bccb-6a03875eac4c)) - (fp_circle (center 0 0) (end 0.92 0) - (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp 1db74212-d692-4e1b-b4bd-a658f524ed32)) - (fp_line (start -1.05 -1.05) (end -1.05 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 35067d5e-e5a4-4f8d-a6b6-33b2cfd3edb8)) - (fp_line (start -1.05 1.05) (end 3.49 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 5e460e4e-a63e-4f00-a6a7-0661ca99b1a6)) - (fp_line (start 3.49 -1.05) (end -1.05 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp d7e27410-0677-4c4e-b058-367e26c8bebe)) - (fp_line (start 3.49 1.05) (end 3.49 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp cae7b1d2-616f-45cf-b639-87ad890f8e8e)) - (fp_line (start 0 0) (end 2.54 0) - (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 85d6eb9b-579b-45bd-9e49-b940e2b36e87)) - (fp_circle (center 0 0) (end 0.8 0) - (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 8aa682a4-9a8b-419a-a646-de3fc0367b4c)) - (pad "1" thru_hole circle (at 0 0 90) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 8 "Net-(C5-Pad1)") (pintype "passive") (tstamp c51d383a-b53a-4671-8a0c-96d419655fd4)) - (pad "2" thru_hole oval (at 2.54 0 90) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 4 "GND") (pintype "passive") (tstamp eb5a2e53-20bc-4282-b37c-0fa2d2fb1534)) - (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - - (footprint "Library:conn_holepad" (layer "F.Cu") - (tstamp 9e7b1d91-5ecd-4ac9-8f97-6818989902ee) - (at 67.02 156.16) - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Generic connector, single row, 01x01, script generated") - (property "ki_keywords" "connector") - (path "/9e00ee5d-3600-4941-9f50-ffa5b59f36da") - (attr through_hole) - (fp_text reference "X2B1" (at -0.004879 2.494589 unlocked) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.1))) - (tstamp 43813caf-7586-4993-b65c-5ab1960aca2c) - ) - (fp_text value "Conn_01x01_Pin" (at 0 1 unlocked) (layer "F.Fab") hide - (effects (font (size 1 1) (thickness 0.15))) - (tstamp bdf7e597-4a99-404c-bf92-6b07911c38c9) - ) - (fp_text user "${REFERENCE}" (at 0 2.5 unlocked) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 846c5826-b5a8-4975-b14a-5205a1815a08) - ) - (pad "1" thru_hole circle (at 0 0) (size 3 3) (drill 1.5) (layers "*.Cu" "*.Mask") - (net 26 "Net-(X2B1-Pin_1)") (pinfunction "Pin_1") (pintype "passive") (tstamp d41ca2f8-9791-46f7-80af-83983bcb8fe6)) - ) - - (footprint "Library:conn_holepad" (layer "F.Cu") - (tstamp a4df7562-a290-407a-ab81-43fab86b5a61) - (at 77.18 69.8) - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Generic connector, single row, 01x01, script generated") - (property "ki_keywords" "connector") - (path "/8a06125c-2a98-42e5-987b-f3b86e05fdf0") - (attr through_hole) - (fp_text reference "SGNL_A1" (at 0 -0.5 unlocked) (layer "F.SilkS") hide - (effects (font (size 1 1) (thickness 0.1))) - (tstamp 2bc4b8e1-d431-481c-bc25-7df681101c5e) - ) - (fp_text value "Conn_01x01_Pin" (at 0 1 unlocked) (layer "F.Fab") hide - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 3081efc6-5f2e-45d5-9bb2-c009835491ec) - ) - (pad "1" thru_hole circle (at 0 0) (size 3 3) (drill 1.5) (layers "*.Cu" "*.Mask") - (net 17 "Net-(SGNL_A1-Pin_1)") (pinfunction "Pin_1") (pintype "passive") (tstamp cf71c2cc-ae6c-46bd-97e1-d41546650fe7)) - ) - - (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") - (tstamp aa6efbc5-6ba3-459f-9580-cd462fcda12c) - (at 87.34 115.52 90) - (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") - (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Unpolarized capacitor") - (property "ki_keywords" "cap capacitor") - (path "/85f8809e-e152-4de2-87ff-91f95cdc3dd3") - (attr through_hole) - (fp_text reference "C1" (at -0.586416 2.015375) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp ebbab0e7-98de-41b6-b0cb-c788ec26123c) - ) - (fp_text value "0.1uF" (at 1.27 1.92 90) (layer "F.Fab") hide - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 5c6adab0-2d60-41b4-bbc3-ac42d5a1c82e) - ) - (fp_line (start 0.92 0) (end 1.54 0) - (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 59a80458-4570-4521-bb70-04a7b47ca69a)) - (fp_circle (center 0 0) (end 0.92 0) - (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp 8c9a20c3-ea9c-4884-96e1-4d56069549b2)) - (fp_line (start -1.05 -1.05) (end -1.05 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 600363cc-f599-45b8-82cc-97ad84ada0f3)) - (fp_line (start -1.05 1.05) (end 3.49 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 24f025a1-3efa-47c2-a005-47860e3c5ef3)) - (fp_line (start 3.49 -1.05) (end -1.05 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 10f5d38a-7c6e-4919-8d15-c7303ae24b4c)) - (fp_line (start 3.49 1.05) (end 3.49 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp ee3862ec-9f0a-4293-8462-ed9a93b4676e)) - (fp_line (start 0 0) (end 2.54 0) - (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 5d96c95e-3ef0-4f19-85e8-ed3f64d3b4ed)) - (fp_circle (center 0 0) (end 0.8 0) - (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp d20545d5-6330-46fa-845d-98299a02fb8c)) - (pad "1" thru_hole circle (at 0 0 90) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 1 "Net-(D1-K)") (pintype "passive") (tstamp fafa54b4-7ce4-401c-90ac-82e976008a01)) - (pad "2" thru_hole oval (at 2.54 0 90) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 4 "GND") (pintype "passive") (tstamp d7be3e35-e20f-4d53-9cad-865efe817c1c)) - (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - - (footprint "Library:conn_holepad" (layer "F.Cu") - (tstamp ae236a0b-2833-4b1a-b543-6315ef73a5e5) - (at 83.53 69.8) - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Generic connector, single row, 01x01, script generated") - (property "ki_keywords" "connector") - (path "/c623b86b-7f7f-40b9-93e6-26635740e815") - (attr through_hole) - (fp_text reference "VCC_A2" (at 0 -0.5 unlocked) (layer "F.SilkS") hide - (effects (font (size 1 1) (thickness 0.1))) - (tstamp d4a06815-153a-44b7-98be-9be23dd99874) - ) - (fp_text value "Conn_01x01_Pin" (at 0 1 unlocked) (layer "F.Fab") hide - (effects (font (size 1 1) (thickness 0.15))) - (tstamp eca0be31-9f7f-4545-972d-bfb6393a3a66) - ) - (pad "1" thru_hole circle (at 0 0) (size 3 3) (drill 1.5) (layers "*.Cu" "*.Mask") - (net 9 "Net-(VCC_A2-Pin_1)") (pinfunction "Pin_1") (pintype "passive") (tstamp f12ffd00-16b3-4975-83e7-a949d3ea280d)) - ) - - (footprint "Library:conn_holepad" (layer "F.Cu") - (tstamp b06caee4-0d58-4da3-b2b7-a0187d91e230) - (at 67.02 69.8) - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Generic connector, single row, 01x01, script generated") - (property "ki_keywords" "connector") - (path "/5927db5e-0de5-4020-a1e2-d3c795f23f3a") - (attr through_hole) - (fp_text reference "SGNL_B1" (at 0 -0.5 unlocked) (layer "F.SilkS") hide - (effects (font (size 1 1) (thickness 0.1))) - (tstamp a5870f43-5667-417d-8f22-e824b3f11f3e) - ) - (fp_text value "Conn_01x01_Pin" (at 0 1 unlocked) (layer "F.Fab") hide - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 4ea611fb-e0e3-4ce4-8d5f-b6df2c9d67ef) - ) - (pad "1" thru_hole circle (at 0 0) (size 3 3) (drill 1.5) (layers "*.Cu" "*.Mask") - (net 20 "Net-(SGNL_B1-Pin_1)") (pinfunction "Pin_1") (pintype "passive") (tstamp 4cd77282-26c4-4a20-b562-8a563709271d)) - ) - - (footprint "C47u63v:CAPPRD350W65D800H1250" (layer "F.Cu") - (tstamp b5075aca-42d2-4f70-96dd-3872779dc083) - (at 63.52 146) - (descr "EEU-EB1J470SJ-1") - (tags "Capacitor Polarised") - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Polarized capacitor") - (property "ki_keywords" "cap capacitor") - (path "/90b176ff-c759-4172-98d6-a482a71dc515") - (attr through_hole) - (fp_text reference "C10" (at 1.709261 2.043428) (layer "F.SilkS") - (effects (font (size 1.27 1.27) (thickness 0.254))) - (tstamp 04109b5d-8e3d-466d-af92-2d3e23461013) - ) - (fp_text value "47uF 63v" (at 0 0) (layer "F.SilkS") hide - (effects (font (size 1.27 1.27) (thickness 0.254))) - (tstamp cf894c60-e36b-4996-9148-04c44f8822b4) - ) - (fp_text user "${REFERENCE}" (at 1.709261 2.043428) (layer "F.Fab") - (effects (font (size 1.27 1.27) (thickness 0.254))) - (tstamp aacf7dd8-53bc-4669-8fd0-d2c10ee3c884) - ) - (fp_circle (center 1.75 0) (end 1.75 4) - (stroke (width 0.2) (type solid)) (fill none) (layer "F.SilkS") (tstamp e5dc9451-87d8-41cb-9aba-07dd9c72d792)) - (fp_circle (center 1.75 0) (end 1.75 4) - (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 727123a4-062b-4900-9e6f-743331ddb861)) - (pad "1" thru_hole rect (at 0 0) (size 1.275 1.275) (drill 0.85) (layers "*.Cu" "*.Mask") - (net 11 "Net-(C10-Pad1)") (pintype "passive") (tstamp 72fa0ea7-e1ff-4997-8dd4-3dda2339d826)) - (pad "2" thru_hole circle (at 3.5 0) (size 1.275 1.275) (drill 0.85) (layers "*.Cu" "*.Mask") - (net 12 "Net-(C10-Pad2)") (pintype "passive") (tstamp c3a63387-05f2-48bc-8b7e-af16fd833770)) - (model "EEU-EB1J470SJ.stp" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - - (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") - (tstamp b84e8712-6efc-465e-95e6-3ac45935569c) - (at 87.34 120.6 -90) - (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") - (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Resistor") - (property "ki_keywords" "R res resistor") - (path "/f8426791-547e-42ff-b8e0-5863e33d65fa") - (attr through_hole) - (fp_text reference "R3" (at 2.957313 -1.970608 -180) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 93ac7d19-d67c-45b8-a018-e66d0d693255) - ) - (fp_text value "2.2K" (at 1.27 1.92 -90) (layer "F.Fab") hide - (effects (font (size 1 1) (thickness 0.15))) - (tstamp c002e533-0fea-41b3-ad7a-366d7df81023) - ) - (fp_line (start 0.92 0) (end 1.54 0) - (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp fabcbd8c-7383-4f28-b114-7b72a06c9db4)) - (fp_circle (center 0 0) (end 0.92 0) - (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp 91cb5219-3d6f-470e-bbb3-a67f1896486d)) - (fp_line (start -1.05 -1.05) (end -1.05 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp d0168173-bd98-4fe2-a2f9-108ce9cd7313)) - (fp_line (start -1.05 1.05) (end 3.49 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 82035587-db50-41ac-99bf-46552f523b4f)) - (fp_line (start 3.49 -1.05) (end -1.05 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 10563e31-80d1-400a-80f8-400fa4a9908e)) - (fp_line (start 3.49 1.05) (end 3.49 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 245990a2-da54-4dac-b95f-bffa48f885c6)) - (fp_line (start 0 0) (end 2.54 0) - (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 0b2c0b3b-30d1-4291-9664-2a73420c5026)) - (fp_circle (center 0 0) (end 0.8 0) - (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 50214740-bcbb-4169-96dc-e5e729a9abc9)) - (pad "1" thru_hole circle (at 0 0 270) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 1 "Net-(D1-K)") (pintype "passive") (tstamp cedec1a4-41e2-4f7c-ab31-82d215a27498)) - (pad "2" thru_hole oval (at 2.54 0 270) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 3 "Net-(C3-Pad1)") (pintype "passive") (tstamp afff5184-659d-42f6-bb50-57f31b58f697)) - (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - - (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") - (tstamp bcd770fa-1ed0-48b0-8cbb-2f87dc5541a4) - (at 56.86 128.22 -90) - (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") - (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Resistor") - (property "ki_keywords" "R res resistor") - (path "/4281c715-bfa5-4c1d-833f-007ae19a4629") - (attr through_hole) - (fp_text reference "R11" (at 2.989661 -2.425673 -180) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 9a4fa8ac-f6aa-4b1e-a05d-52c099ecae4f) - ) - (fp_text value "47" (at 1.27 1.92 -90) (layer "F.Fab") hide - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 962b8959-cd71-424d-9398-040fad19f045) - ) - (fp_line (start 0.92 0) (end 1.54 0) - (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 0f00f251-48ff-4520-818f-2835947dbbb5)) - (fp_circle (center 0 0) (end 0.92 0) - (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp 1f82be44-c34c-45c4-a30e-d1d9d366e1e8)) - (fp_line (start -1.05 -1.05) (end -1.05 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp c004e9fc-9e95-467f-b958-961ff4734bc8)) - (fp_line (start -1.05 1.05) (end 3.49 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 817873f0-a5c6-4482-916c-b8bce3351ef6)) - (fp_line (start 3.49 -1.05) (end -1.05 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp ded4a380-55a3-4c46-9dee-d6b001bdd121)) - (fp_line (start 3.49 1.05) (end 3.49 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp be36d02b-41c4-493a-9114-68008531c09c)) - (fp_line (start 0 0) (end 2.54 0) - (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp cf4a0f84-049d-482e-bfa5-0f57f4c43070)) - (fp_circle (center 0 0) (end 0.8 0) - (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp f98b31ee-14a8-4d0a-abaa-9b47340b48fc)) - (pad "1" thru_hole circle (at 0 0 270) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 11 "Net-(C10-Pad1)") (pintype "passive") (tstamp 15d39eaf-4060-4dfa-b0c8-a68e2a2c5e4f)) - (pad "2" thru_hole oval (at 2.54 0 270) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 25 "Net-(X3B1-Pin_1)") (pintype "passive") (tstamp 0ab0880e-3789-4e75-baf6-f6b9fa2c8ffa)) - (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - - (footprint "Library:conn_holepad" (layer "F.Cu") - (tstamp c262cae7-d9e8-4f1f-a599-ab4800cab255) - (at 54.32 69.8) - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Generic connector, single row, 01x01, script generated") - (property "ki_keywords" "connector") - (path "/989fc3e9-94aa-4ae0-8fd0-530b54bc7c6a") - (attr through_hole) - (fp_text reference "GND_B1" (at 0 -0.5 unlocked) (layer "F.SilkS") hide - (effects (font (size 1 1) (thickness 0.1))) - (tstamp 94ee880b-62c4-4690-b8db-c8deb2a802c1) - ) - (fp_text value "Conn_01x01_Pin" (at 0 1 unlocked) (layer "F.Fab") hide - (effects (font (size 1 1) (thickness 0.15))) - (tstamp d231f684-55fa-4bd0-89a8-90307185cb75) - ) - (pad "1" thru_hole circle (at 0 0) (size 3 3) (drill 1.5) (layers "*.Cu" "*.Mask") - (net 4 "GND") (pinfunction "Pin_1") (pintype "passive") (tstamp f252adea-92a7-4e02-b375-5662a1008766)) - ) - - (footprint "C47u35v:CAPPRD200W50D525H1250" (layer "F.Cu") - (tstamp c6f7ad19-b3e5-4c35-be9c-f49f41b71b9c) - (at 75.18 110.44) - (descr "5*11") - (tags "Capacitor Polarised") - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Polarized capacitor") - (property "ki_keywords" "cap capacitor") - (path "/4b15cc8f-884d-43ed-8a34-09c6b829c7ae") - (attr through_hole) - (fp_text reference "C5" (at 1.185658 3.822112) (layer "F.SilkS") - (effects (font (size 1.27 1.27) (thickness 0.254))) - (tstamp 24d7d41c-a663-47c1-8766-fb44e232409e) - ) - (fp_text value "47uF 35v" (at 0 0) (layer "F.SilkS") hide - (effects (font (size 1.27 1.27) (thickness 0.254))) - (tstamp b4f9aa59-0764-4eae-8c6d-9997b8fa7f0c) - ) - (fp_circle (center 1 0) (end 1 2.625) - (stroke (width 0.2) (type solid)) (fill none) (layer "F.SilkS") (tstamp 40116a95-4088-4a06-9824-3e994e651ff3)) - (fp_circle (center 1 0) (end 1 2.625) - (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 181d21fe-9b9e-4efc-9745-dea381a54c65)) - (pad "1" thru_hole rect (at 0 0) (size 1.1 1.1) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 8 "Net-(C5-Pad1)") (pintype "passive") (tstamp e476c53c-8951-41ac-bbc2-278126285c9f)) - (pad "2" thru_hole circle (at 2 0) (size 1.1 1.1) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 4 "GND") (pintype "passive") (tstamp 8a97c5c8-fa77-4792-bcb6-843f0102dd8e)) - (model "UVZ1V470MDD1TA.stp" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - - (footprint "C47u35v:CAPPRD200W50D525H1250" (layer "F.Cu") - (tstamp c8cfe034-72d1-41a5-9f6c-2a8b58c4cd4e) - (at 77.18 125.68 -90) - (descr "5*11") - (tags "Capacitor Polarised") - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Polarized capacitor") - (property "ki_keywords" "cap capacitor") - (path "/4af43834-c924-4e65-939c-9334e1de4766") - (attr through_hole) - (fp_text reference "C2" (at 4.880074 -0.6182) (layer "F.SilkS") - (effects (font (size 1.27 1.27) (thickness 0.254))) - (tstamp 82a06bbe-6f85-4009-a909-b329e94c0fb2) - ) - (fp_text value "47uF 35v" (at 0 0 90) (layer "F.SilkS") hide - (effects (font (size 1.27 1.27) (thickness 0.254))) - (tstamp 60c1f95e-29ae-4968-820b-c216c26f2b5c) - ) - (fp_circle (center 1 0) (end 1 2.625) - (stroke (width 0.2) (type solid)) (fill none) (layer "F.SilkS") (tstamp a013cb76-2687-462b-b75e-1d91f94c1fe4)) - (fp_circle (center 1 0) (end 1 2.625) - (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 077d1680-f903-4e77-9d5a-52100de2801a)) - (pad "1" thru_hole rect (at 0 0 270) (size 1.1 1.1) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 1 "Net-(D1-K)") (pintype "passive") (tstamp 1ea38779-7b99-4e3c-b48d-39ba0b2f0dab)) - (pad "2" thru_hole circle (at 2 0 270) (size 1.1 1.1) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 4 "GND") (pintype "passive") (tstamp 8ce33f08-44ac-4d15-acca-7b62eca58ef5)) - (model "UVZ1V470MDD1TA.stp" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - - (footprint "Library:conn_holepad" (layer "F.Cu") - (tstamp cbc40c09-e30e-460a-bcc4-8171f797a030) - (at 89.88 69.8) - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Generic connector, single row, 01x01, script generated") - (property "ki_keywords" "connector") - (path "/dc9beee8-362a-431f-ae58-61cdcb6832dc") - (attr through_hole) - (fp_text reference "GND_A1" (at 0 -0.5 unlocked) (layer "F.SilkS") hide - (effects (font (size 1 1) (thickness 0.1))) - (tstamp 0947c915-f5c6-432f-bac1-be020a7c7bb5) - ) - (fp_text value "Conn_01x01_Pin" (at 0 1 unlocked) (layer "F.Fab") hide - (effects (font (size 1 1) (thickness 0.15))) - (tstamp a5e5504f-2e7f-452d-96ef-037a92a4a23b) - ) - (pad "1" thru_hole circle (at 0 0) (size 3 3) (drill 1.5) (layers "*.Cu" "*.Mask") - (net 4 "GND") (pinfunction "Pin_1") (pintype "passive") (tstamp e567df10-68fb-4fdd-87c4-6b1de5057a6f)) - ) - - (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") - (tstamp cc303b2f-da8c-4df0-8c75-83ec2aa6f6fc) - (at 56.86 120.6 -90) - (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") - (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Resistor") - (property "ki_keywords" "R res resistor") - (path "/486efbe6-6d60-4f65-a28a-eac2f703a21a") - (attr through_hole) - (fp_text reference "R13" (at 2.950784 -2.43873) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 40383974-586f-488f-8d15-c01cebca7367) - ) - (fp_text value "2.2K" (at 1.27 1.92 90) (layer "F.Fab") hide - (effects (font (size 1 1) (thickness 0.15))) - (tstamp c2c5b360-c807-4f30-9b32-b41bbee60ce9) - ) - (fp_line (start 0.92 0) (end 1.54 0) - (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 0c243eae-8e52-488e-a46c-947e4f00312f)) - (fp_circle (center 0 0) (end 0.92 0) - (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp c3db4bd4-0b60-4cb5-b000-4ad70d25d9d2)) - (fp_line (start -1.05 -1.05) (end -1.05 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 4200db4c-fcd2-48e8-977c-4ee8d4040212)) - (fp_line (start -1.05 1.05) (end 3.49 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp e81289d4-047f-4bc2-896f-9a6e0ff93552)) - (fp_line (start 3.49 -1.05) (end -1.05 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp e402de82-732e-43fe-94e4-3ec091ea86f6)) - (fp_line (start 3.49 1.05) (end 3.49 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp afbc005d-9813-4792-ae0f-efc02afcb9fb)) - (fp_line (start 0 0) (end 2.54 0) - (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 0609b196-f404-48f2-a5ed-1c23bbb9d89f)) - (fp_circle (center 0 0) (end 0.8 0) - (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp b8c28dfb-b198-482c-a03d-5187315aa79b)) - (pad "1" thru_hole circle (at 0 0 270) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 10 "Net-(D2-K)") (pintype "passive") (tstamp 430a3414-b187-4b96-962c-d5afbac9f47b)) - (pad "2" thru_hole oval (at 2.54 0 270) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 11 "Net-(C10-Pad1)") (pintype "passive") (tstamp 57635aef-4120-4aa4-87b9-0454e8f067e7)) - (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - - (footprint "Library:conn_holepad" (layer "F.Cu") - (tstamp d52543a2-d091-4b9c-b89b-c6f43a6f94a3) - (at 60.67 69.8) - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Generic connector, single row, 01x01, script generated") - (property "ki_keywords" "connector") - (path "/6e74e034-da91-4106-b8de-7f1079a017da") - (attr through_hole) - (fp_text reference "VCC_B2" (at 0 -0.5 unlocked) (layer "F.SilkS") hide - (effects (font (size 1 1) (thickness 0.1))) - (tstamp 999556b9-5a96-4aa2-8b56-6ff0dc5ca186) - ) - (fp_text value "Conn_01x01_Pin" (at 0 1 unlocked) (layer "F.Fab") hide - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 6fce5574-8878-4437-a31a-399b7d6c31ad) - ) - (pad "1" thru_hole circle (at 0 0) (size 3 3) (drill 1.5) (layers "*.Cu" "*.Mask") - (net 16 "Net-(VCC_B2-Pin_1)") (pinfunction "Pin_1") (pintype "passive") (tstamp 1cbaaaae-3dbb-4e2b-86b8-dcce87cdf954)) - ) - - (footprint "Connector_Pin:Pin_D1.0mm_L10.0mm" (layer "F.Cu") - (tstamp d692ec11-ab6f-4974-8421-c0368dbf4bfd) - (at 87.34 107.9) - (descr "solder Pin_ diameter 1.0mm, hole diameter 1.0mm (press fit), length 10.0mm") - (tags "solder Pin_ press fit") - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Generic connector, single row, 01x01, script generated") - (property "ki_keywords" "connector") - (path "/7056a7e2-eebb-4df3-8f54-dadb45bfed44") - (attr through_hole) - (fp_text reference "VCC_A1" (at 0 2.54) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp bcc587bd-d6e7-4ee4-934b-57f69efee420) - ) - (fp_text value "Conn_01x01_Pin" (at 0 -2.05) (layer "F.Fab") hide - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 76102052-38a6-4791-a45f-cc550315cc22) - ) - (fp_text user "${REFERENCE}" (at 0 2.54) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 1a183987-d28e-4930-9de2-f47cf58afc0a) - ) - (fp_circle (center 0 0) (end 1.25 0.05) - (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp 93f1e5e5-0c0e-4c7a-b73d-030d479f2f03)) - (fp_circle (center 0 0) (end 1.5 0) - (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd") (tstamp d14b7f59-ddf5-434e-a696-7056665ee85a)) - (fp_circle (center 0 0) (end 0.5 0) - (stroke (width 0.12) (type solid)) (fill none) (layer "F.Fab") (tstamp b9a14ece-9b3b-46a2-aa18-c9f98a17f8db)) - (fp_circle (center 0 0) (end 1 0) - (stroke (width 0.12) (type solid)) (fill none) (layer "F.Fab") (tstamp 2ea6bfbc-373f-49ce-87c4-76d0b945f499)) - (pad "1" thru_hole circle (at 0 0) (size 2 2) (drill 1) (layers "*.Cu" "*.Mask") - (net 1 "Net-(D1-K)") (pinfunction "Pin_1") (pintype "passive") (tstamp 34803306-11b2-4687-9250-7e4da9c0467d)) - (model "${KICAD6_3DMODEL_DIR}/Connector_Pin.3dshapes/Pin_D1.0mm_L10.0mm.wrl" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - - (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") - (tstamp d78725d9-47d7-4c83-be9b-4988d133a9b1) - (at 54.32 87.58 -90) - (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") - (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Resistor") - (property "ki_keywords" "R res resistor") - (path "/8a64f8ab-cec7-4969-9401-c34ade5f0cb5") - (attr through_hole) - (fp_text reference "R17" (at 3.02605 -2.438207) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp b5b0ae33-50f6-4aa9-bad9-6288811ae392) - ) - (fp_text value "47K" (at 1.27 1.92 90) (layer "F.Fab") hide - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 4c53eb70-ba9c-4268-9c7f-16a0f882d12c) - ) - (fp_line (start 0.92 0) (end 1.54 0) - (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 4b654bad-6c82-4e13-81eb-7690e7d65088)) - (fp_circle (center 0 0) (end 0.92 0) - (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp ecb0d627-3dd7-45ed-94b8-d110571a4102)) - (fp_line (start -1.05 -1.05) (end -1.05 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp a14ceb7e-9045-4f6b-a877-1bcdabbccfc3)) - (fp_line (start -1.05 1.05) (end 3.49 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 351a8d7b-5519-49b6-be48-159d30d68ba9)) - (fp_line (start 3.49 -1.05) (end -1.05 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp b2638917-4ba7-4f9a-ba60-7bbf29a08545)) - (fp_line (start 3.49 1.05) (end 3.49 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 027b16d4-ed89-4ecb-9d56-55b28958995a)) - (fp_line (start 0 0) (end 2.54 0) - (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 04b0efa9-7fa9-4091-806e-0feb46bcca8a)) - (fp_circle (center 0 0) (end 0.8 0) - (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 247a97aa-db32-42a5-9497-b9292b6b560c)) - (pad "1" thru_hole circle (at 0 0 270) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 15 "Net-(C12-Pad1)") (pintype "passive") (tstamp b7485c42-0a31-4c6d-b2c9-9bf54242cc73)) - (pad "2" thru_hole oval (at 2.54 0 270) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 4 "GND") (pintype "passive") (tstamp c5b5e88b-0bde-42ff-bc86-61422ecab011)) - (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - - (footprint "C47u63v:CAPPRD350W65D800H1250" (layer "F.Cu") - (tstamp d9eee99c-ac07-4010-90bf-79bd31a2f61a) - (at 77.18 146) - (descr "EEU-EB1J470SJ-1") - (tags "Capacitor Polarised") - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Polarized capacitor") - (property "ki_keywords" "cap capacitor") - (path "/b794b8cc-7dca-48f0-a5b9-9fe56f5cb9c1") - (attr through_hole) - (fp_text reference "C3" (at 1.91582 2.211304) (layer "F.SilkS") - (effects (font (size 1.27 1.27) (thickness 0.254))) - (tstamp 68af9610-47d8-4b28-b278-6835e9f14d62) - ) - (fp_text value "47uF 63v" (at 0 0) (layer "F.SilkS") hide - (effects (font (size 1.27 1.27) (thickness 0.254))) - (tstamp 797c0ff2-1abe-4cef-bea8-2fdb46466297) - ) - (fp_circle (center 1.75 0) (end 1.75 4) - (stroke (width 0.2) (type solid)) (fill none) (layer "F.SilkS") (tstamp f1b0b285-09c1-4cac-8dfb-1ae231a7707b)) - (fp_circle (center 1.75 0) (end 1.75 4) - (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp fcaa04ce-8c24-4122-bb76-2277c48bccb8)) - (pad "1" thru_hole rect (at 0 0) (size 1.275 1.275) (drill 0.85) (layers "*.Cu" "*.Mask") - (net 3 "Net-(C3-Pad1)") (pintype "passive") (tstamp 21675859-af13-49a5-a89a-4474ecd9d726)) - (pad "2" thru_hole circle (at 3.5 0) (size 1.275 1.275) (drill 0.85) (layers "*.Cu" "*.Mask") - (net 5 "Net-(C3-Pad2)") (pintype "passive") (tstamp a8594eb3-c6a5-4d87-9514-85efd0312e03)) - (model "EEU-EB1J470SJ.stp" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - - (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") - (tstamp ddaadb9e-34f4-4d27-b880-e32c97542663) - (at 82.26 120.6 -90) - (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") - (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Resistor") - (property "ki_keywords" "R res resistor") - (path "/831a82f3-bee1-4a20-9f0c-de8891a80b24") - (attr through_hole) - (fp_text reference "R4" (at 2.990888 -1.947178 -180) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 43cbdaf2-5dad-4be4-9de3-4d78d516d7ab) - ) - (fp_text value "2.2K" (at 1.27 1.92 90) (layer "F.Fab") hide - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 832d4942-107e-4326-b3fb-18baf1123f02) - ) - (fp_line (start 0.92 0) (end 1.54 0) - (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 5de920bc-4e4d-4053-9613-313706e2500e)) - (fp_circle (center 0 0) (end 0.92 0) - (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp fd69e8ad-e9cf-4107-bfbb-ec8585d1b82d)) - (fp_line (start -1.05 -1.05) (end -1.05 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp c07d5f7c-5786-4121-9594-1fc82a628b7f)) - (fp_line (start -1.05 1.05) (end 3.49 1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 554f7d26-3640-4294-a434-eabcfd4bc15f)) - (fp_line (start 3.49 -1.05) (end -1.05 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp f7ad05db-2f1b-46fa-8b4b-5d2a50ac6c8f)) - (fp_line (start 3.49 1.05) (end 3.49 -1.05) - (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 1024eda9-edb0-4304-b86a-f738438a6539)) - (fp_line (start 0 0) (end 2.54 0) - (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 76286cb1-2984-4886-ad44-69a694c5d13f)) - (fp_circle (center 0 0) (end 0.8 0) - (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 173aec12-1541-4d22-b2dc-2ce2e22a79aa)) - (pad "1" thru_hole circle (at 0 0 270) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 1 "Net-(D1-K)") (pintype "passive") (tstamp a2f44d4a-752d-4b68-aa02-fc3a04b207fa)) - (pad "2" thru_hole oval (at 2.54 0 270) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 6 "Net-(C4-Pad1)") (pintype "passive") (tstamp fdc90a4c-2006-4549-be27-2a173bff3e6b)) - (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - - (footprint "Connector_Pin:Pin_D1.0mm_L10.0mm" (layer "F.Cu") - (tstamp eb2b727b-6c46-4603-9390-f7a52a6f2750) - (at 56.86 107.9) - (descr "solder Pin_ diameter 1.0mm, hole diameter 1.0mm (press fit), length 10.0mm") - (tags "solder Pin_ press fit") - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Generic connector, single row, 01x01, script generated") - (property "ki_keywords" "connector") - (path "/6778b725-cc7e-4fa7-8d8b-1f47e2db759c") - (attr through_hole) - (fp_text reference "VCC_B1" (at 0 2.25) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 0fcbc334-e9b5-4b03-9f5f-48d04892b842) - ) - (fp_text value "Conn_01x01_Pin" (at 0 -2.05) (layer "F.Fab") hide - (effects (font (size 1 1) (thickness 0.15))) - (tstamp d693ee10-12f0-40b1-acd0-b1f4f6a0d677) - ) - (fp_text user "${REFERENCE}" (at 0 2.25) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 705ee86f-7b1f-4c78-b3e6-e12f18a1ff44) - ) - (fp_circle (center 0 0) (end 1.25 0.05) - (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp 87fce251-3f66-46ee-9c2b-640083f0e3ef)) - (fp_circle (center 0 0) (end 1.5 0) - (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd") (tstamp a93f1705-a556-4ce2-9fb9-5840e70a3de0)) - (fp_circle (center 0 0) (end 0.5 0) - (stroke (width 0.12) (type solid)) (fill none) (layer "F.Fab") (tstamp 691e2d80-b959-4c7c-958d-8041b1a0f5f9)) - (fp_circle (center 0 0) (end 1 0) - (stroke (width 0.12) (type solid)) (fill none) (layer "F.Fab") (tstamp ccdcab9c-1148-4b7c-a5cc-08cbddc04d08)) - (pad "1" thru_hole circle (at 0 0) (size 2 2) (drill 1) (layers "*.Cu" "*.Mask") - (net 10 "Net-(D2-K)") (pinfunction "Pin_1") (pintype "passive") (tstamp 30eff844-c514-488d-a74f-a90181e31452)) - (model "${KICAD6_3DMODEL_DIR}/Connector_Pin.3dshapes/Pin_D1.0mm_L10.0mm.wrl" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - - (footprint "C47u35v:CAPPRD200W50D525H1250" (layer "F.Cu") - (tstamp ee1741f5-8fe9-4aef-8cfa-1bdaf9b0d7f6) - (at 67.02 118.06 -90) - (descr "5*11") - (tags "Capacitor Polarised") - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Polarized capacitor") - (property "ki_keywords" "cap capacitor") - (path "/028b1213-6965-4c6b-88c6-99867053371d") - (attr through_hole) - (fp_text reference "C14" (at 4.811353 -1.175692) (layer "F.SilkS") - (effects (font (size 1.27 1.27) (thickness 0.254))) - (tstamp 75c77906-4dc5-4d49-9c15-83f3025923e3) - ) - (fp_text value "47uF 35v" (at 0 0 90) (layer "F.SilkS") hide - (effects (font (size 1.27 1.27) (thickness 0.254))) - (tstamp 5bda1c20-1d50-4b9b-ab0c-0b8357e40a88) - ) - (fp_circle (center 1 0) (end 1 2.625) - (stroke (width 0.2) (type solid)) (fill none) (layer "F.SilkS") (tstamp bc54e2fa-61af-42de-9f4f-d4840899512c)) - (fp_circle (center 1 0) (end 1 2.625) - (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 999edf3e-b089-400a-bdea-5554c000e468)) - (pad "1" thru_hole rect (at 0 0 270) (size 1.1 1.1) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 16 "Net-(VCC_B2-Pin_1)") (pintype "passive") (tstamp b6101f82-1379-437b-9a34-da0e4f4c85ec)) - (pad "2" thru_hole circle (at 2 0 270) (size 1.1 1.1) (drill 0.7) (layers "*.Cu" "*.Mask") - (net 2 "Earth") (pintype "passive") (tstamp 88bfbde4-b27a-497d-9b8a-37ad5bce6032)) - (model "UVZ1V470MDD1TA.stp" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - - (footprint "Library:conn_holepad" (layer "F.Cu") - (tstamp f4e09da5-de11-4910-938f-ad22f422a378) - (at 77.18 156.16) - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "ki_description" "Generic connector, single row, 01x01, script generated") - (property "ki_keywords" "connector") - (path "/02603ffc-8ef0-4551-98e5-69f3d0b5f5ed") - (attr through_hole) - (fp_text reference "X2A1" (at -0.002784 2.539356 unlocked) (layer "F.SilkS") - (effects (font (size 1 1) (thickness 0.1))) - (tstamp d5f4a471-ed9d-4edc-bb23-bc08bbf7bf32) - ) - (fp_text value "Conn_01x01_Pin" (at 0 1 unlocked) (layer "F.Fab") hide - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 7b9076ea-7a3b-44da-9637-c3c60712ac36) - ) - (fp_text user "${REFERENCE}" (at 0 2.5 unlocked) (layer "F.Fab") - (effects (font (size 1 1) (thickness 0.15))) - (tstamp 1306ac26-2168-4d74-b747-b714a328742e) - ) - (pad "1" thru_hole circle (at 0 0) (size 3 3) (drill 1.5) (layers "*.Cu" "*.Mask") - (net 24 "Net-(X2A1-Pin_1)") (pinfunction "Pin_1") (pintype "passive") (tstamp 1b13fdac-fbab-47a5-83c7-5c17e6ca715a)) - ) - - (footprint "opa1642:SOIC127P600X175-8N" (layer "B.Cu") - (tstamp 3df34ff6-6920-43a3-9389-a99a8a5a4bd9) - (at 67.02 90.12 -90) - (descr "D0008A") - (tags "Integrated Circuit") - (property "Availability" "In Stock") - (property "Check_prices" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=eda") - (property "Description" "\n \n Dual SoundPlus™ high-performance, JFET-input audio op amp\n \n") - (property "MANUFACTURER" "Texas Instruments") - (property "MAXIMUM_PACKAGE_HEIGHT" "1.75 mm") - (property "MF" "Texas Instruments") - (property "MP" "OPA1642AID") - (property "PARTREV" "D") - (property "Package" "SOIC-8 Texas Instruments") - (property "Price" "None") - (property "STANDARD" "IPC 7351B") - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "SnapEDA_Link" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=snap") - (path "/e46d3b5f-0bed-4df1-a7ff-7fb3e0496ac5") - (attr smd) - (fp_text reference "IC2" (at 0 0 90) (layer "B.SilkS") - (effects (font (size 1.27 1.27) (thickness 0.254)) (justify mirror)) - (tstamp 7ab03f5b-4dbe-4043-9c09-ca81c971378b) - ) - (fp_text value "OPA1642AID" (at 0 0 90) (layer "B.SilkS") hide - (effects (font (size 1.27 1.27) (thickness 0.254)) (justify mirror)) - (tstamp 21191121-0451-4bc0-8c43-6a118ab7be55) - ) - (fp_text user "${REFERENCE}" (at 0 0 90) (layer "B.Fab") - (effects (font (size 1.27 1.27) (thickness 0.254)) (justify mirror)) - (tstamp 67213649-116b-44b4-a016-908d30e19bf3) - ) - (fp_line (start -3.475 2.58) (end -1.948 2.58) - (stroke (width 0.2) (type solid)) (layer "B.SilkS") (tstamp 4ba2e218-d66f-433a-99ce-c0aba8017f15)) - (fp_line (start -1.598 -2.452) (end -1.598 2.452) - (stroke (width 0.2) (type solid)) (layer "B.SilkS") (tstamp bcdd0f5b-e8fd-4242-a11c-667ec30e092a)) - (fp_line (start -1.598 2.452) (end 1.598 2.452) - (stroke (width 0.2) (type solid)) (layer "B.SilkS") (tstamp 131d93cb-5ed0-47be-bfc4-cc8c8360c030)) - (fp_line (start 1.598 -2.452) (end -1.598 -2.452) - (stroke (width 0.2) (type solid)) (layer "B.SilkS") (tstamp dbf2a3aa-479b-49e0-9ed3-b6d343f94a44)) - (fp_line (start 1.598 2.452) (end 1.598 -2.452) - (stroke (width 0.2) (type solid)) (layer "B.SilkS") (tstamp 29a50c34-9072-49c7-a0a0-9c192fb183ab)) - (fp_line (start -3.725 -2.75) (end -3.725 2.75) - (stroke (width 0.05) (type solid)) (layer "B.CrtYd") (tstamp 33d63245-0b86-4679-846f-9f2d45d02764)) - (fp_line (start -3.725 2.75) (end 3.725 2.75) - (stroke (width 0.05) (type solid)) (layer "B.CrtYd") (tstamp e3a830bd-70bf-43fa-8411-57307f60abfe)) - (fp_line (start 3.725 -2.75) (end -3.725 -2.75) - (stroke (width 0.05) (type solid)) (layer "B.CrtYd") (tstamp 5a89c354-5527-4ee0-ba60-77c7881cd971)) - (fp_line (start 3.725 2.75) (end 3.725 -2.75) - (stroke (width 0.05) (type solid)) (layer "B.CrtYd") (tstamp 257f17a2-9701-4be4-9f56-f6d7fa9d7e23)) - (fp_line (start -1.948 -2.452) (end -1.948 2.452) - (stroke (width 0.1) (type solid)) (layer "B.Fab") (tstamp c3bf4815-2da1-412e-98a1-e0d962eeab47)) - (fp_line (start -1.948 1.182) (end -0.678 2.452) - (stroke (width 0.1) (type solid)) (layer "B.Fab") (tstamp d5548735-46c8-45d4-83d2-7300ccccc86a)) - (fp_line (start -1.948 2.452) (end 1.948 2.452) - (stroke (width 0.1) (type solid)) (layer "B.Fab") (tstamp 57abdd58-59f1-4a90-8ba3-166964f27bb7)) - (fp_line (start 1.948 -2.452) (end -1.948 -2.452) - (stroke (width 0.1) (type solid)) (layer "B.Fab") (tstamp cf79f700-d51a-4ec9-b719-038b079e3b22)) - (fp_line (start 1.948 2.452) (end 1.948 -2.452) - (stroke (width 0.1) (type solid)) (layer "B.Fab") (tstamp 662b0489-51c6-4ec4-b6cf-76b8bd6b6370)) - (pad "1" smd rect (at -2.711 1.905 180) (size 0.65 1.528) (layers "B.Cu" "B.Paste" "B.Mask") - (net 14 "Net-(C11-Pad2)") (pintype "output") (tstamp 2fbfacf1-4eb5-40c6-bb8b-0f91dcc18e05)) - (pad "2" smd rect (at -2.711 0.635 180) (size 0.65 1.528) (layers "B.Cu" "B.Paste" "B.Mask") - (net 20 "Net-(SGNL_B1-Pin_1)") (pintype "input") (tstamp 778b80fd-e950-42d3-8fac-7497a66155cd)) - (pad "3" smd rect (at -2.711 -0.635 180) (size 0.65 1.528) (layers "B.Cu" "B.Paste" "B.Mask") - (net 21 "Net-(IC2-Pad3)") (pintype "input") (tstamp b6284a84-3a51-44fb-a8b8-477ad4f72f15)) - (pad "4" smd rect (at -2.711 -1.905 180) (size 0.65 1.528) (layers "B.Cu" "B.Paste" "B.Mask") - (net 4 "GND") (pintype "power_in") (tstamp 5404bce7-efa6-4418-852d-fa6f13572326)) - (pad "5" smd rect (at 2.711 -1.905 180) (size 0.65 1.528) (layers "B.Cu" "B.Paste" "B.Mask") - (net 15 "Net-(C12-Pad1)") (pintype "input") (tstamp 1ce196e2-76b3-456b-89af-f5c8710a9ca6)) - (pad "6" smd rect (at 2.711 -0.635 180) (size 0.65 1.528) (layers "B.Cu" "B.Paste" "B.Mask") - (net 22 "Net-(IC2-Pad6)") (pintype "input") (tstamp 3f001d35-b3f1-4d1c-bff8-c4562d7faed2)) - (pad "7" smd rect (at 2.711 0.635 180) (size 0.65 1.528) (layers "B.Cu" "B.Paste" "B.Mask") - (net 12 "Net-(C10-Pad2)") (pintype "output") (tstamp a4088c01-4b23-4e86-ad63-95bdb41b011c)) - (pad "8" smd rect (at 2.711 1.905 180) (size 0.65 1.528) (layers "B.Cu" "B.Paste" "B.Mask") - (net 16 "Net-(VCC_B2-Pin_1)") (pintype "power_in") (tstamp cdda338b-07c9-42fb-acce-81d9ace24aff)) - (model "OPA1642AID.stp" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - - (footprint "opa1642:SOIC127P600X175-8N" (layer "B.Cu") - (tstamp 7cf4c0a4-a134-4e2d-a9f4-d4f0335ad8a0) - (at 77.18 90.12 -90) - (descr "D0008A") - (tags "Integrated Circuit") - (property "Availability" "In Stock") - (property "Check_prices" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=eda") - (property "Description" "\n \n Dual SoundPlus™ high-performance, JFET-input audio op amp\n \n") - (property "MANUFACTURER" "Texas Instruments") - (property "MAXIMUM_PACKAGE_HEIGHT" "1.75 mm") - (property "MF" "Texas Instruments") - (property "MP" "OPA1642AID") - (property "PARTREV" "D") - (property "Package" "SOIC-8 Texas Instruments") - (property "Price" "None") - (property "STANDARD" "IPC 7351B") - (property "Sheetfile" "retro.kicad_sch") - (property "Sheetname" "") - (property "SnapEDA_Link" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=snap") - (path "/adb405c9-094f-4a77-a219-d4048679141c") - (attr smd) - (fp_text reference "IC1" (at 0 0 90) (layer "B.SilkS") - (effects (font (size 1.27 1.27) (thickness 0.254)) (justify mirror)) - (tstamp 48fcb5a8-de4a-49ed-9c39-0a45edaf5644) - ) - (fp_text value "OPA1642AID" (at 0 0 90) (layer "B.SilkS") hide - (effects (font (size 1.27 1.27) (thickness 0.254)) (justify mirror)) - (tstamp e980c6f1-3dd5-41e4-aff4-881a7810fd3b) - ) - (fp_text user "${REFERENCE}" (at 0 0 90) (layer "B.Fab") - (effects (font (size 1.27 1.27) (thickness 0.254)) (justify mirror)) - (tstamp d46ea488-78be-483c-9644-e4f51b81e21d) - ) - (fp_line (start -3.475 2.58) (end -1.948 2.58) - (stroke (width 0.2) (type solid)) (layer "B.SilkS") (tstamp 4987cd9b-409e-4639-95b2-7988f6efac41)) - (fp_line (start -1.598 -2.452) (end -1.598 2.452) - (stroke (width 0.2) (type solid)) (layer "B.SilkS") (tstamp 077c0592-6626-4af3-842c-207009d40bb7)) - (fp_line (start -1.598 2.452) (end 1.598 2.452) - (stroke (width 0.2) (type solid)) (layer "B.SilkS") (tstamp e1d8020f-32ec-488c-8482-4347981fbbf2)) - (fp_line (start 1.598 -2.452) (end -1.598 -2.452) - (stroke (width 0.2) (type solid)) (layer "B.SilkS") (tstamp 7dd04dc5-0d6d-4f9c-8c6b-ab7bb6b47523)) - (fp_line (start 1.598 2.452) (end 1.598 -2.452) - (stroke (width 0.2) (type solid)) (layer "B.SilkS") (tstamp f18e4cd9-d7e6-46b3-ac9f-9c7ce5d20559)) - (fp_line (start -3.725 -2.75) (end -3.725 2.75) - (stroke (width 0.05) (type solid)) (layer "B.CrtYd") (tstamp 4266a81e-f548-41f9-8523-14e6db9e1724)) - (fp_line (start -3.725 2.75) (end 3.725 2.75) - (stroke (width 0.05) (type solid)) (layer "B.CrtYd") (tstamp ab2f59ea-310d-4b7f-8328-3c4a915d4b49)) - (fp_line (start 3.725 -2.75) (end -3.725 -2.75) - (stroke (width 0.05) (type solid)) (layer "B.CrtYd") (tstamp abd35881-88a4-4be3-a67e-31363880025e)) - (fp_line (start 3.725 2.75) (end 3.725 -2.75) - (stroke (width 0.05) (type solid)) (layer "B.CrtYd") (tstamp 8a69ea1e-3605-442c-873c-c3877c9e2571)) - (fp_line (start -1.948 -2.452) (end -1.948 2.452) - (stroke (width 0.1) (type solid)) (layer "B.Fab") (tstamp f9dc7044-1345-4c74-8392-92bcdaf4f525)) - (fp_line (start -1.948 1.182) (end -0.678 2.452) - (stroke (width 0.1) (type solid)) (layer "B.Fab") (tstamp 5b15ff4f-b94b-4329-93a6-97c742c07889)) - (fp_line (start -1.948 2.452) (end 1.948 2.452) - (stroke (width 0.1) (type solid)) (layer "B.Fab") (tstamp 2333be59-73ae-483a-9836-ef610aaddd14)) - (fp_line (start 1.948 -2.452) (end -1.948 -2.452) - (stroke (width 0.1) (type solid)) (layer "B.Fab") (tstamp 6f8697fd-e0da-45e5-a0bb-6a6308141d72)) - (fp_line (start 1.948 2.452) (end 1.948 -2.452) - (stroke (width 0.1) (type solid)) (layer "B.Fab") (tstamp f3a72be3-480c-48cb-86f1-9b74814ffaae)) - (pad "1" smd rect (at -2.711 1.905 180) (size 0.65 1.528) (layers "B.Cu" "B.Paste" "B.Mask") - (net 7 "Net-(C4-Pad2)") (pintype "output") (tstamp de8d7992-cea7-4454-bef2-0ae393fe4429)) - (pad "2" smd rect (at -2.711 0.635 180) (size 0.65 1.528) (layers "B.Cu" "B.Paste" "B.Mask") - (net 17 "Net-(SGNL_A1-Pin_1)") (pintype "input") (tstamp 97fbe7d0-32c8-47ef-85ae-e696bcb0104b)) - (pad "3" smd rect (at -2.711 -0.635 180) (size 0.65 1.528) (layers "B.Cu" "B.Paste" "B.Mask") - (net 18 "Net-(IC1-Pad3)") (pintype "input") (tstamp 82632c34-11fe-46c8-91a9-46ac8f926739)) - (pad "4" smd rect (at -2.711 -1.905 180) (size 0.65 1.528) (layers "B.Cu" "B.Paste" "B.Mask") - (net 4 "GND") (pintype "power_in") (tstamp 2fbbe455-206b-4f3b-8542-5880a65d816a)) - (pad "5" smd rect (at 2.711 -1.905 180) (size 0.65 1.528) (layers "B.Cu" "B.Paste" "B.Mask") - (net 8 "Net-(C5-Pad1)") (pintype "input") (tstamp d4532c89-058b-49c5-ac06-59239cb28bbf)) - (pad "6" smd rect (at 2.711 -0.635 180) (size 0.65 1.528) (layers "B.Cu" "B.Paste" "B.Mask") - (net 19 "Net-(IC1-Pad6)") (pintype "input") (tstamp 6faf1d0f-8776-42a8-b7bb-c08c8260601f)) - (pad "7" smd rect (at 2.711 0.635 180) (size 0.65 1.528) (layers "B.Cu" "B.Paste" "B.Mask") - (net 5 "Net-(C3-Pad2)") (pintype "output") (tstamp e52b3a68-d4f8-4520-b5fa-c78e4d4231ae)) - (pad "8" smd rect (at 2.711 1.905 180) (size 0.65 1.528) (layers "B.Cu" "B.Paste" "B.Mask") - (net 9 "Net-(VCC_A2-Pin_1)") (pintype "power_in") (tstamp 4acc962d-aee4-4b2e-925c-89282e018113)) - (model "OPA1642AID.stp" - (offset (xyz 0 0 0)) - (scale (xyz 1 1 1)) - (rotate (xyz 0 0 0)) - ) - ) - - (gr_circle (center 86.495385 77.591) (end 84.22977 77.629116) - (stroke (width 0.15) (type default)) (fill none) (layer "F.SilkS") (tstamp 74ba7f71-dc4b-4851-9c33-6c55ed8714ba)) - (gr_circle (center 57.495 77.591) (end 55.241385 77.629116) - (stroke (width 0.15) (type default)) (fill none) (layer "F.SilkS") (tstamp d78a8605-0faa-45b0-a883-fb5ba757e10d)) - (gr_line (start 55.015769 156.333) (end 54.923769 156.333) - (stroke (width 0.1) (type default)) (layer "Edge.Cuts") (tstamp 00c33ccb-8250-48c5-86b2-2bf2450fe837)) - (gr_line (start 52.432248 64.815468) (end 91.578521 64.817237) - (stroke (width 0.1) (type default)) (layer "Edge.Cuts") (tstamp 33d19db6-c008-49ec-97b4-4d648cf0e5a2)) - (gr_arc (start 91.578521 64.817237) (mid 92.481003 65.191089) (end 92.854855 66.093571) - (stroke (width 0.1) (type default)) (layer "Edge.Cuts") (tstamp 455ddf0d-7497-49f4-92c2-28e3811e4ba9)) - (gr_line (start 57.972 159.289231) (end 86.038769 159.291) - (stroke (width 0.1) (type default)) (layer "Edge.Cuts") (tstamp 492a0e52-3505-4eff-b233-23a6f27b5c18)) - (gr_line (start 88.995 156.334769) (end 89.087 156.334769) - (stroke (width 0.1) (type default)) (layer "Edge.Cuts") (tstamp 7ddecae6-4c4b-42b0-bab0-5e26d93e32e6)) - (gr_arc (start 51.155914 66.091802) (mid 51.529759 65.189328) (end 52.432248 64.815468) - (stroke (width 0.1) (type default)) (layer "Edge.Cuts") (tstamp 88ecc551-e657-45ea-9528-c0f9a0a6a25d)) - (gr_arc (start 55.015769 156.333) (mid 57.106138 157.198853) (end 57.972 159.289231) - (stroke (width 0.1) (type default)) (layer "Edge.Cuts") (tstamp bec32d07-79ec-4cb1-a483-8aabd22cc57b)) - (gr_line (start 51.155914 66.091802) (end 54.923769 156.333) - (stroke (width 0.1) (type default)) (layer "Edge.Cuts") (tstamp c840ab66-863d-4edf-8993-ecb9072a5357)) - (gr_arc (start 86.038769 159.291) (mid 86.904653 157.200674) (end 88.995 156.334769) - (stroke (width 0.1) (type default)) (layer "Edge.Cuts") (tstamp cede8dad-cd64-44e3-9657-2ee8823340ac)) - (gr_line (start 92.854855 66.093571) (end 89.087 156.334769) - (stroke (width 0.1) (type default)) (layer "Edge.Cuts") (tstamp f2ed6753-d7ba-4ccc-ab01-db834b2589fd)) - (gr_text "XLR" (at 69.789193 153.371392) (layer "F.Cu" knockout) (tstamp 367109ff-45e2-4dd4-a867-67d045227ac0) - (effects (font (size 1.5 1.5) (thickness 0.3) bold italic) (justify left bottom)) - ) - (gr_text "senke 2025" (at 90.063107 105.686999 90) (layer "F.Cu" knockout) (tstamp 81178e4f-6204-475d-9d9f-29553ce9a21b) - (effects (font (size 1 1) (thickness 0.25) bold) (justify left bottom)) - ) - (gr_text "talas.fr" (at 88.216471 105.351247 90) (layer "F.Cu" knockout) (tstamp d09b2539-7373-4473-a5f0-c8459ea8232d) - (effects (font (size 1.5 1.5) (thickness 0.3) bold) (justify left bottom)) - ) - (gr_text "capsule" (at 67.482734 67.292707) (layer "F.Cu" knockout) (tstamp f3c31054-420d-4d95-8d93-ef87df79b9ce) - (effects (font (size 1.5 1.5) (thickness 0.3) bold italic) (justify left bottom)) - ) - (gr_text "GND_A1" (at 89.781358 72.707931) (layer "F.SilkS") (tstamp 13144784-7da2-4b4e-8378-dfc12272a967) - (effects (font (size 1 1) (thickness 0.15))) - ) - (gr_text "VCC_B2" (at 60.571358 72.707931) (layer "F.SilkS") (tstamp 45eb5003-35fc-42b1-b550-d82b87dc2308) - (effects (font (size 1 1) (thickness 0.15))) - ) - (gr_text "SGNL_B1" (at 66.921358 72.707931) (layer "F.SilkS") (tstamp 7199f138-4675-4532-802c-8a270467b896) - (effects (font (size 1 1) (thickness 0.15))) - ) - (gr_text "GND_B1" (at 54.221358 72.707931) (layer "F.SilkS") (tstamp 8e34020d-ee90-4bea-acee-401facaca816) - (effects (font (size 1 1) (thickness 0.15))) - ) - (gr_text "SGNL_A1" (at 77.081358 72.707931) (layer "F.SilkS") (tstamp ca1ce028-c4b6-4e6d-8613-a3acf2c1d838) - (effects (font (size 1 1) (thickness 0.15))) - ) - (gr_text "VCC_A2" (at 83.431358 72.707931) (layer "F.SilkS") (tstamp e096f130-20bb-4a15-b169-12682ad3daa8) - (effects (font (size 1 1) (thickness 0.15))) - ) - (gr_text "SGNL_A1" (at 77.081358 72.707931) (layer "F.Fab") (tstamp 77aab8de-1485-43a0-8253-6813f49783a1) - (effects (font (size 1 1) (thickness 0.15))) - ) - (gr_text "VCC_B2" (at 60.571358 72.707931) (layer "F.Fab") (tstamp 7d8d8aa4-9316-4eb8-8e65-366793df64c3) - (effects (font (size 1 1) (thickness 0.15))) - ) - (gr_text "VCC_A2" (at 83.431358 72.707931) (layer "F.Fab") (tstamp a362efc1-93b0-498c-a9b5-5ad8e9dde368) - (effects (font (size 1 1) (thickness 0.15))) - ) - (gr_text "GND_A1" (at 89.781358 72.707931) (layer "F.Fab") (tstamp da20e25f-bcc9-4b72-9cae-1c851ad01816) - (effects (font (size 1 1) (thickness 0.15))) - ) - (gr_text "SGNL_B1" (at 66.921358 72.707931) (layer "F.Fab") (tstamp f5fd0f85-7d20-48ef-9e08-f1615af2a5b0) - (effects (font (size 1 1) (thickness 0.15))) - ) - (gr_text "GND_B1" (at 54.221358 72.707931) (layer "F.Fab") (tstamp f822b50d-810f-4469-a3b4-13f7ecdb3896) - (effects (font (size 1 1) (thickness 0.15))) - ) - - (segment (start 82.26 108.927) (end 81.2013 109.986) (width 0.25) (layer "F.Cu") (net 1) (tstamp 033ed2bb-8469-4304-85c0-bf1822acd097)) - (segment (start 87.34 115.52) (end 87.34 120.6) (width 0.25) (layer "F.Cu") (net 1) (tstamp 5b7910c5-b356-43cf-93e4-9129027fce53)) - (segment (start 81.2013 114.461) (end 82.26 115.52) (width 0.25) (layer "F.Cu") (net 1) (tstamp 6ceba954-2229-49e6-955d-305504d99db7)) - (segment (start 82.26 120.6) (end 82.26 115.52) (width 0.25) (layer "F.Cu") (net 1) (tstamp 8f976c81-d877-4384-a08c-3ca17cafc9a7)) - (segment (start 81.2013 109.986) (end 81.2013 114.461) (width 0.25) (layer "F.Cu") (net 1) (tstamp 947eee9b-2039-4bfc-96c8-2b3f72776459)) - (segment (start 82.26 107.9) (end 82.26 108.927) (width 0.25) (layer "F.Cu") (net 1) (tstamp f0123df6-f5c1-44e7-b1b5-db88687f71b8)) - (segment (start 78.0569 124.803) (end 82.26 120.6) (width 0.25) (layer "B.Cu") (net 1) (tstamp 0f933596-8e11-4139-b28f-3d53e2b65e8f)) - (segment (start 77.18 125.68) (end 77.18 124.803) (width 0.25) (layer "B.Cu") (net 1) (tstamp 43b6479b-b5e7-4c93-a126-9d36bedc1575)) - (segment (start 77.18 124.803) (end 78.0569 124.803) (width 0.25) (layer "B.Cu") (net 1) (tstamp 468ff319-7061-4497-9d76-148f0a46bce9)) - (segment (start 87.34 115.52) (end 82.26 115.52) (width 0.25) (layer "B.Cu") (net 1) (tstamp e8ed593d-4fde-4ca5-973b-825aa6c34f02)) - (segment (start 82.26 107.9) (end 87.34 107.9) (width 0.25) (layer "B.Cu") (net 1) (tstamp f2e1bcf5-7192-4f9b-84ac-cab1a56402ee)) - (segment (start 64.0947 113.62) (end 64.0947 117.135) (width 0.25) (layer "F.Cu") (net 2) (tstamp 011514d0-e73c-4507-8bee-ecb4698c5cf8)) - (segment (start 58.3134 107.839) (end 64.0947 113.62) (width 0.25) (layer "F.Cu") (net 2) (tstamp 18621ccc-97d1-422b-a191-1af0d6a3d70c)) - (segment (start 64.0947 117.135) (end 67.02 120.06) (width 0.25) (layer "F.Cu") (net 2) (tstamp 27ab4cda-0b13-471f-9f30-93674f24404f)) - (segment (start 59.4 87.58) (end 59.4 88.6069) (width 0.25) (layer "F.Cu") (net 2) (tstamp 3bd23884-6659-4488-9734-e307f95f4561)) - (segment (start 59.4 88.6069) (end 58.3134 89.6935) (width 0.25) (layer "F.Cu") (net 2) (tstamp 3ca0f2c6-e7ac-4621-9547-60df783c3c76)) - (segment (start 58.3134 89.6935) (end 58.3134 107.839) (width 0.25) (layer "F.Cu") (net 2) (tstamp f26086f4-295c-444a-b07e-f5b1beeede6b)) - (segment (start 67.02 120.06) (end 77.18 120.06) (width 0.25) (layer "B.Cu") (net 2) (tstamp 08323eb8-51d0-445e-876a-d6a559a18f87)) - (segment (start 82.3471 90.0729) (end 84.8 87.62) (width 0.25) (layer "B.Cu") (net 2) (tstamp 39477db4-ebc9-4055-8bdf-e52fb8d0bda8)) - (segment (start 62.9198 90.0729) (end 82.3471 90.0729) (width 0.25) (layer "B.Cu") (net 2) (tstamp 62811476-ee45-4e1f-b41b-4f7210083eb8)) - (segment (start 59.4 87.58) (end 60.4269 87.58) (width 0.25) (layer "B.Cu") (net 2) (tstamp 7e5dc6c4-f876-4f74-b4c1-a48b6f4862b1)) - (segment (start 60.4269 87.58) (end 62.9198 90.0729) (width 0.25) (layer "B.Cu") (net 2) (tstamp fed4ad18-75fd-4576-b8e0-3843781eaf50)) - (segment (start 87.34 123.14) (end 87.34 128.22) (width 0.25) (layer "F.Cu") (net 3) (tstamp 5f1b3636-cc0a-4b84-b10d-87032e3c549a)) - (segment (start 77.18 145.036) (end 85.8254 136.39) (width 0.25) (layer "B.Cu") (net 3) (tstamp 3de93b22-4b07-4749-9b80-faadfb0dfe41)) - (segment (start 85.8254 136.39) (end 85.8254 129.735) (width 0.25) (layer "B.Cu") (net 3) (tstamp 611ec917-5917-421b-a96c-cdce32b8428f)) - (segment (start 85.8254 129.735) (end 87.34 128.22) (width 0.25) (layer "B.Cu") (net 3) (tstamp 6acbe092-0b0d-48bc-84b6-882d58d868b0)) - (segment (start 77.18 146) (end 77.18 145.036) (width 0.25) (layer "B.Cu") (net 3) (tstamp 737fa8f5-9acd-46ae-89c3-8976c3b7cd30)) - (segment (start 78.0569 126.803) (end 78.0569 111.317) (width 0.25) (layer "F.Cu") (net 4) (tstamp 209b7696-56e1-4224-af84-7fd6d1d04f56)) - (segment (start 72.1 132.76) (end 72.1 156.16) (width 0.25) (layer "F.Cu") (net 4) (tstamp 4a57c764-e240-44fe-9e4a-a44909338814)) - (segment (start 69.02 88.8035) (end 68.3582 88.1417) (width 0.25) (layer "F.Cu") (net 4) (tstamp 7f104a8c-b8eb-4e6a-9943-e9e99c85e889)) - (segment (start 54.32 90.12) (end 52.69 88.49) (width 0.25) (layer "F.Cu") (net 4) (tstamp 8a063b81-c04a-45fa-a1d0-37a4b91aa557)) - (segment (start 68.3582 88.1417) (end 64.239487 88.1417) (width 0.25) (layer "F.Cu") (net 4) (tstamp 8fdb7a63-017c-4bf9-bdeb-0d540fac39ce)) - (segment (start 77.18 127.68) (end 72.1 132.76) (width 0.25) (layer "F.Cu") (net 4) (tstamp 9450e8b7-97b0-4fef-b6c2-09de9444a4da)) - (segment (start 52.69 88.49) (end 52.69 71.43) (width 0.25) (layer "F.Cu") (net 4) (tstamp 9e2e9213-6763-48c0-967c-31cb121ee944)) - (segment (start 78.0569 111.317) (end 77.18 110.44) (width 0.25) (layer "F.Cu") (net 4) (tstamp ab78860f-29ed-46ac-886f-71b5cbc58123)) - (segment (start 69.02 110.44) (end 69.02 88.8035) (width 0.25) (layer "F.Cu") (net 4) (tstamp d0570697-78d4-43c6-99c2-8047b7716482)) - (segment (start 52.69 71.43) (end 54.32 69.8) (width 0.25) (layer "F.Cu") (net 4) (tstamp d4631fd8-c765-48e9-b922-c1bd07952ee4)) - (segment (start 64.239487 88.1417) (end 60.095148 92.286039) (width 0.25) (layer "F.Cu") (net 4) (tstamp d93fad23-99ac-4ed8-83aa-8b7d89589ac0)) - (segment (start 77.18 127.68) (end 78.0569 126.803) (width 0.25) (layer "F.Cu") (net 4) (tstamp f900bd41-8a8e-4cc2-9459-860be8914972)) - (via (at 69.02 88.8035) (size 0.8) (drill 0.4) (layers "F.Cu" "B.Cu") (net 4) (tstamp 129a9b89-5231-41d6-b6b7-0b4c17a0b92c)) - (via (at 60.095148 92.286039) (size 0.8) (drill 0.4) (layers "F.Cu" "B.Cu") (net 4) (tstamp 1fae0adb-002a-477a-9d38-b1293b358999)) - (segment (start 89.88 87.58) (end 91.51 85.95) (width 0.25) (layer "B.Cu") (net 4) (tstamp 020e3c31-f49e-4bf8-afb1-a3378dbe861b)) - (segment (start 79.085 87.409) (end 79.085 87.6903) (width 0.25) (layer "B.Cu") (net 4) (tstamp 029076ff-0072-4ee6-8e0d-7d0a4bb36558)) - (segment (start 68.925 88.4999) (end 68.925 87.409) (width 0.25) (layer "B.Cu") (net 4) (tstamp 0432c1c9-9c7b-434c-8df5-f1b8cd7c2a11)) - (segment (start 79.085 87.6903) (end 78.2754 88.4999) (width 0.25) (layer "B.Cu") (net 4) (tstamp 0530d8a5-231e-4b26-8bab-e4534cf5b4d0)) - (segment (start 61.94 112.98) (end 56.86 112.98) (width 0.25) (layer "B.Cu") (net 4) (tstamp 10c684c4-384b-4bb1-9802-27a017234b10)) - (segment (start 69.9247 109.535) (end 69.02 110.44) (width 0.25) (layer "B.Cu") (net 4) (tstamp 200f0b78-46d3-4086-ba11-e7c9fdef8ef3)) - (segment (start 67.02 127.68) (end 77.18 127.68) (width 0.25) (layer "B.Cu") (net 4) (tstamp 206855e3-6ef7-4f28-be50-ae130a134168)) - (segment (start 89.88 87.58) (end 88.995 86.695) (width 0.25) (layer "B.Cu") (net 4) (tstamp 2b3a4b4c-dc26-4ea9-a6ce-f3d40a36d287)) - (segment (start 69.02 88.4999) (end 69.02 88.8035) (width 0.25) (layer "B.Cu") (net 4) (tstamp 3795d412-e14a-41e8-8f49-ab7d279b549d)) - (segment (start 66.48 112.98) (end 61.94 112.98) (width 0.25) (layer "B.Cu") (net 4) (tstamp 5bc49640-0fb6-45cf-86f7-949f08b8f773)) - (segment (start 69.02 110.44) (end 66.48 112.98) (width 0.25) (layer "B.Cu") (net 4) (tstamp 630ccbc0-97c6-498c-b9fb-b76aec5abe5a)) - (segment (start 77.18 110.44) (end 76.2753 109.535) (width 0.25) (layer "B.Cu") (net 4) (tstamp 6b04eb24-4d04-4fbc-8f8b-fecd472cb035)) - (segment (start 69.02 88.4999) (end 68.925 88.4999) (width 0.25) (layer "B.Cu") (net 4) (tstamp 89a8cd68-57ef-456b-9590-bd7f0c4ad535)) - (segment (start 91.51 71.43) (end 89.88 69.8) (width 0.25) (layer "B.Cu") (net 4) (tstamp 8c90b011-8b8c-400f-95d3-7f69d18891db)) - (segment (start 76.2753 109.535) (end 69.9247 109.535) (width 0.25) (layer "B.Cu") (net 4) (tstamp b0b7525a-365f-4a95-a51a-0538227cfddc)) - (segment (start 91.51 85.95) (end 91.51 71.43) (width 0.25) (layer "B.Cu") (net 4) (tstamp b68031b4-f189-46ec-86f8-7deeadf0408b)) - (segment (start 56.486039 92.286039) (end 54.32 90.12) (width 0.25) (layer "B.Cu") (net 4) (tstamp bc108439-51a0-405a-8800-1d928eeebab0)) - (segment (start 79.72 112.98) (end 77.18 110.44) (width 0.25) (layer "B.Cu") (net 4) (tstamp bf74106a-38d0-4ac9-894b-b3257172b551)) - (segment (start 78.2754 88.4999) (end 69.02 88.4999) (width 0.25) (layer "B.Cu") (net 4) (tstamp c61e81df-31c9-4137-9809-73b07d0f6924)) - (segment (start 82.26 112.98) (end 79.72 112.98) (width 0.25) (layer "B.Cu") (net 4) (tstamp d581192b-5ad9-44e8-8c5c-a8e50245b8ee)) - (segment (start 60.095148 92.286039) (end 56.486039 92.286039) (width 0.25) (layer "B.Cu") (net 4) (tstamp e6c6c8af-431d-44e3-80e5-8bf5b73c9e7b)) - (segment (start 79.799 86.695) (end 79.085 87.409) (width 0.25) (layer "B.Cu") (net 4) (tstamp ea06388d-501b-40d4-a754-9214f9986ba8)) - (segment (start 88.995 86.695) (end 79.799 86.695) (width 0.25) (layer "B.Cu") (net 4) (tstamp ecf260d7-8e62-49eb-b41d-e130e4bfcac0)) - (segment (start 87.34 112.98) (end 82.26 112.98) (width 0.25) (layer "B.Cu") (net 4) (tstamp ffd8f634-a55d-4ffa-b2c2-db6a48589650)) - (segment (start 81.6611 131.613) (end 80.7494 130.702) (width 0.25) (layer "F.Cu") (net 5) (tstamp 41914ef8-2b70-4516-8b91-8d4a1c6ad113)) - (segment (start 80.7494 99.7963) (end 79.72 98.7669) (width 0.25) (layer "F.Cu") (net 5) (tstamp 44f9646d-9bb7-4aa7-8f3b-13190119d9e3)) - (segment (start 81.6611 145.019) (end 81.6611 131.613) (width 0.25) (layer "F.Cu") (net 5) (tstamp 573a7f29-8016-4176-9747-7bb9b08d1bbc)) - (segment (start 80.68 146) (end 81.6611 145.019) (width 0.25) (layer "F.Cu") (net 5) (tstamp 64ca9b3b-9090-4837-b7d7-2062f1c94b8d)) - (segment (start 80.7494 130.702) (end 80.7494 99.7963) (width 0.25) (layer "F.Cu") (net 5) (tstamp 7fb442c0-5ad0-403d-8b4b-4fc69a0296fe)) - (segment (start 79.72 98.7669) (end 79.72 97.74) (width 0.25) (layer "F.Cu") (net 5) (tstamp ce845281-4dd4-45e5-8e01-fed6dd598892)) - (segment (start 76.1222 94.3447) (end 76.545 93.9219) (width 0.25) (layer "B.Cu") (net 5) (tstamp 5ee15710-e1f9-427f-a849-9bca30ae3891)) - (segment (start 77.636 98.7971) (end 76.729 98.7971) (width 0.25) (layer "B.Cu") (net 5) (tstamp 6a28c046-4bde-4928-829f-220e428921e7)) - (segment (start 79.72 97.74) (end 78.6931 97.74) (width 0.25) (layer "B.Cu") (net 5) (tstamp bfe7d129-aa68-4bf4-acb8-3382809ad7b2)) - (segment (start 78.6931 97.74) (end 77.636 98.7971) (width 0.25) (layer "B.Cu") (net 5) (tstamp c041df09-87bc-4514-ba24-8502e2981e0b)) - (segment (start 76.729 98.7971) (end 76.1222 98.1903) (width 0.25) (layer "B.Cu") (net 5) (tstamp c7bf2868-9744-4d90-ae42-781f22730798)) - (segment (start 76.1222 98.1903) (end 76.1222 94.3447) (width 0.25) (layer "B.Cu") (net 5) (tstamp ec9df18b-c318-4a01-b823-7386bafb5273)) - (segment (start 76.545 93.9219) (end 76.545 92.831) (width 0.25) (layer "B.Cu") (net 5) (tstamp ff9a395c-2705-4936-a7a2-3124e4d8609e)) - (segment (start 82.26 123.14) (end 82.26 128.22) (width 0.25) (layer "F.Cu") (net 6) (tstamp b0159e10-7e34-4899-8e29-f6ae0eb2a7ae)) - (segment (start 77.18 135.84) (end 77.18 133.3) (width 0.25) (layer "B.Cu") (net 6) (tstamp 14098f69-dbc8-4e6c-899a-833c4bd5d92f)) - (segment (start 77.18 133.3) (end 82.26 128.22) (width 0.25) (layer "B.Cu") (net 6) (tstamp 1918a999-926d-40c9-b091-a03b127d731e)) - (segment (start 80.68 135.84) (end 78.6481 133.808) (width 0.25) (layer "F.Cu") (net 7) (tstamp 32731c60-21b7-48de-9e3b-17a942cc01ad)) - (segment (start 78.6481 95.1713) (end 79.3057 94.5137) (width 0.25) (layer "F.Cu") (net 7) (tstamp 7441eda8-12bb-43ac-ba0c-28122cbfa1b2)) - (segment (start 79.3057 94.5137) (end 79.3057 88.9846) (width 0.25) (layer "F.Cu") (net 7) (tstamp 82074f95-0106-4af6-9dfe-ff0868fb3208)) - (segment (start 79.3057 88.9846) (end 76.0675 85.7464) (width 0.25) (layer "F.Cu") (net 7) (tstamp b0e70cf5-81fd-4bf0-809b-6533d48ca216)) - (segment (start 78.6481 133.808) (end 78.6481 95.1713) (width 0.25) (layer "F.Cu") (net 7) (tstamp ee70bf47-da11-4709-a104-3108b90f5480)) - (via (at 76.0675 85.7464) (size 0.8) (drill 0.4) (layers "F.Cu" "B.Cu") (net 7) (tstamp 843e8b25-8363-4680-a2c8-47ee8bbd546d)) - (segment (start 75.4958 86.3181) (end 76.0675 85.7464) (width 0.25) (layer "B.Cu") (net 7) (tstamp eda17a6f-9b34-4b77-8e87-14e7462acc5c)) - (segment (start 75.275 86.3181) (end 75.4958 86.3181) (width 0.25) (layer "B.Cu") (net 7) (tstamp f06f72e7-c9c4-4566-8b81-f93b95bf24ec)) - (segment (start 75.275 87.409) (end 75.275 86.3181) (width 0.25) (layer "B.Cu") (net 7) (tstamp f657d139-4893-4327-b7cf-2e1dfca41fb9)) - (segment (start 75.18 110.44) (end 75.18 94.2099) (width 0.25) (layer "F.Cu") (net 8) (tstamp 6bc86e2c-2996-49bf-aa44-5c72550b6336)) - (segment (start 74.01 82.5) (end 74.01 93.0399) (width 0.25) (layer "F.Cu") (net 8) (tstamp 957b566a-aea2-435e-b4cb-2c411feda973)) - (segment (start 75.18 94.2099) (end 78.5737 94.2099) (width 0.25) (layer "F.Cu") (net 8) (tstamp df89d961-57d2-49eb-bbca-59874808f559)) - (segment (start 74.01 93.0399) (end 75.18 94.2099) (width 0.25) (layer "F.Cu") (net 8) (tstamp f4e04e41-0b1f-4874-82b2-cb4080d896d3)) - (via (at 78.5737 94.2099) (size 0.8) (drill 0.4) (layers "F.Cu" "B.Cu") (net 8) (tstamp efd79e95-8324-4136-8fac-9615285e42c7)) - (segment (start 79.085 94.1379) (end 82.711 94.1379) (width 0.25) (layer "B.Cu") (net 8) (tstamp 280f19ec-4ae6-48ec-8c75-cf612e900837)) - (segment (start 83.7731 95.2) (end 84.8 95.2) (width 0.25) (layer "B.Cu") (net 8) (tstamp 39d1744e-0b1c-4b49-9a1f-df989157daa7)) - (segment (start 84.8 95.2) (end 89.88 90.12) (width 0.25) (layer "B.Cu") (net 8) (tstamp 7199385e-82ba-45a4-8d99-940d43022047)) - (segment (start 79.085 94.1379) (end 79.013 94.2099) (width 0.25) (layer "B.Cu") (net 8) (tstamp 71a3bca3-c4e9-4b67-9dfd-7c0b7b600969)) - (segment (start 79.085 92.831) (end 79.085 94.1379) (width 0.25) (layer "B.Cu") (net 8) (tstamp 8b121a54-ab83-4a67-b050-7eb62b70d62b)) - (segment (start 79.013 94.2099) (end 78.5737 94.2099) (width 0.25) (layer "B.Cu") (net 8) (tstamp 8d174f60-2811-4740-bac5-ef04d050456d)) - (segment (start 82.711 94.1379) (end 83.7731 95.2) (width 0.25) (layer "B.Cu") (net 8) (tstamp 95248e96-1c28-4d02-a242-e23471082208)) - (segment (start 82.26 91.39) (end 82.26 95.2) (width 0.25) (layer "F.Cu") (net 9) (tstamp 31842fad-80d1-4205-ade9-cb599793e47c)) - (segment (start 84.8 90.12) (end 83.53 90.12) (width 0.25) (layer "F.Cu") (net 9) (tstamp 66071923-5a15-412d-8a71-fbc223391dfd)) - (segment (start 83.53 90.12) (end 83.53 69.8) (width 0.25) (layer "F.Cu") (net 9) (tstamp a47341c9-1190-4a53-ab9c-3cba13e5ed44)) - (segment (start 82.26 95.2) (end 82.26 105.36) (width 0.25) (layer "F.Cu") (net 9) (tstamp f6f6da33-710a-43ce-a559-5bb62d603a7a)) - (segment (start 83.53 90.12) (end 82.26 91.39) (width 0.25) (layer "F.Cu") (net 9) (tstamp ffcd4bda-db79-4da9-a8a3-635187e176a4)) - (segment (start 78.0569 118.06) (end 81.8669 114.25) (width 0.25) (layer "B.Cu") (net 9) (tstamp 1560c018-4a1e-46d8-af76-960dc75055c1)) - (segment (start 88.4173 113.412) (end 88.4173 112.604) (width 0.25) (layer "B.Cu") (net 9) (tstamp 42827461-628a-47fa-b08f-33f87ae0f439)) - (segment (start 87.4211 111.608) (end 84.5051 111.608) (width 0.25) (layer "B.Cu") (net 9) (tstamp 5a20b21c-7f67-48bc-9682-35ad7807ea62)) - (segment (start 81.8669 114.25) (end 87.5788 114.25) (width 0.25) (layer "B.Cu") (net 9) (tstamp 75a2aedf-a1f0-436d-8b60-33805d7773c0)) - (segment (start 83.1799 91.7401) (end 84.8 90.12) (width 0.25) (layer "B.Cu") (net 9) (tstamp 7c315e74-68bb-47b9-b791-ef151f0a99ad)) - (segment (start 88.4173 112.604) (end 87.4211 111.608) (width 0.25) (layer "B.Cu") (net 9) (tstamp 7e905f53-d12e-4c6c-a95f-df022685b381)) - (segment (start 81.2331 106.387) (end 82.26 105.36) (width 0.25) (layer "B.Cu") (net 9) (tstamp 82145b9e-be81-43ed-8d4c-cd2e1ab3fd4b)) - (segment (start 75.275 92.831) (end 75.275 91.7401) (width 0.25) (layer "B.Cu") (net 9) (tstamp 85374f5c-03dc-4f1c-8f58-2f107fc1a33c)) - (segment (start 77.18 118.06) (end 78.0569 118.06) (width 0.25) (layer "B.Cu") (net 9) (tstamp 9d88e646-edf9-45bb-bbb5-cc7967393bf8)) - (segment (start 75.275 91.7401) (end 83.1799 91.7401) (width 0.25) (layer "B.Cu") (net 9) (tstamp d7df7ffb-ecb6-4cfa-80e1-3c7a3f2bbb6b)) - (segment (start 87.5788 114.25) (end 88.4173 113.412) (width 0.25) (layer "B.Cu") (net 9) (tstamp d7fdcb52-26a4-411b-9067-9dc16e26cf3a)) - (segment (start 81.2331 108.336) (end 81.2331 106.387) (width 0.25) (layer "B.Cu") (net 9) (tstamp e1747144-0d21-49d5-ac45-6910079b9df8)) - (segment (start 84.5051 111.608) (end 81.2331 108.336) (width 0.25) (layer "B.Cu") (net 9) (tstamp eda48c8b-865b-4453-bb6c-28f1fe4934bd)) - (segment (start 55.8247 114.485) (end 55.8247 108.935) (width 0.25) (layer "F.Cu") (net 10) (tstamp 3d94bf94-28b3-4501-b4e5-bbbc21f0c949)) - (segment (start 56.86 115.52) (end 55.8247 114.485) (width 0.25) (layer "F.Cu") (net 10) (tstamp 78c82b5b-d8e9-4a93-8bb4-08ddcecc90ac)) - (segment (start 56.86 120.6) (end 56.86 115.52) (width 0.25) (layer "F.Cu") (net 10) (tstamp 8bc8fa6f-f48a-4d7e-b848-d901e2c7b02e)) - (segment (start 55.8247 108.935) (end 56.86 107.9) (width 0.25) (layer "F.Cu") (net 10) (tstamp 8d6d4c9e-08f9-43b5-bb33-9ad274829d64)) - (segment (start 61.94 115.52) (end 61.94 120.6) (width 0.25) (layer "F.Cu") (net 10) (tstamp f8152bbb-c6e7-404e-ad64-6339be0b407c)) - (segment (start 56.86 115.52) (end 61.94 115.52) (width 0.25) (layer "B.Cu") (net 10) (tstamp 09d0e9dc-d1bc-43cc-9c6c-0862846af11f)) - (segment (start 61.94 107.9) (end 56.86 107.9) (width 0.25) (layer "B.Cu") (net 10) (tstamp 2f01dbc9-351e-4cd9-8350-7b66a53b3ee3)) - (segment (start 67.02 124.803) (end 66.1431 124.803) (width 0.25) (layer "B.Cu") (net 10) (tstamp 82e8cd85-55c3-47ef-9c76-b8c2ac0db5ae)) - (segment (start 66.1431 124.803) (end 61.94 120.6) (width 0.25) (layer "B.Cu") (net 10) (tstamp b3f79d25-bf79-4404-b7e2-192cb54d8962)) - (segment (start 67.02 125.68) (end 67.02 124.803) (width 0.25) (layer "B.Cu") (net 10) (tstamp e49e4464-7b1a-47ea-ae3c-56146c0d6e75)) - (segment (start 62.1037 143.619) (end 63.52 145.036) (width 0.25) (layer "F.Cu") (net 11) (tstamp 0ca72782-37d6-4240-902d-cbcc30ba93f5)) - (segment (start 63.52 145.036) (end 63.52 146) (width 0.25) (layer "F.Cu") (net 11) (tstamp 34390c90-540c-4185-a10a-d335e2d03290)) - (segment (start 56.86 128.22) (end 62.1037 133.464) (width 0.25) (layer "F.Cu") (net 11) (tstamp 525f5242-96e3-4301-92db-2e87ab6fca9a)) - (segment (start 56.86 123.14) (end 56.86 128.22) (width 0.25) (layer "F.Cu") (net 11) (tstamp 602dbfaf-c2bd-4fbe-aefd-0c62402095c1)) - (segment (start 62.1037 133.464) (end 62.1037 143.619) (width 0.25) (layer "F.Cu") (net 11) (tstamp e4222a8c-64d3-40a1-bcd8-c54f2a1e1c9a)) - (segment (start 68.0514 99.7983) (end 68.0514 144.969) (width 0.25) (layer "F.Cu") (net 12) (tstamp 4b384b9a-ace7-414f-85f4-36c871b82c79)) - (segment (start 67.02 97.74) (end 67.02 98.7669) (width 0.25) (layer "F.Cu") (net 12) (tstamp 98edad9e-9b7d-4306-acd9-bcd21ca6ec8f)) - (segment (start 68.0514 144.969) (end 67.02 146) (width 0.25) (layer "F.Cu") (net 12) (tstamp a50917f3-82e3-4232-b42d-13ef12c3d26b)) - (segment (start 67.02 98.7669) (end 68.0514 99.7983) (width 0.25) (layer "F.Cu") (net 12) (tstamp c8e59ab2-0126-4ee4-bcb4-f9feb13b6814)) - (segment (start 66.385 96.0781) (end 66.385 92.831) (width 0.25) (layer "B.Cu") (net 12) (tstamp 2c42c174-72da-4bbb-a82d-72bf4284b146)) - (segment (start 67.02 96.7131) (end 66.385 96.0781) (width 0.25) (layer "B.Cu") (net 12) (tstamp 93a8ecaa-164f-41e8-9c1d-541a4b1a161d)) - (segment (start 67.02 97.74) (end 67.02 96.7131) (width 0.25) (layer "B.Cu") (net 12) (tstamp f2759f14-3b40-4461-975f-25b120ec3674)) - (segment (start 63.52 135.84) (end 63.52 129.8) (width 0.25) (layer "F.Cu") (net 13) (tstamp 883338c8-980d-4e1d-9d4f-d6f471350e92)) - (segment (start 61.94 128.22) (end 61.94 123.14) (width 0.25) (layer "F.Cu") (net 13) (tstamp cd2e08c0-8a72-4ef4-b9a7-37cb0ae7dbb2)) - (segment (start 63.52 129.8) (end 61.94 128.22) (width 0.25) (layer "F.Cu") (net 13) (tstamp e731ea8a-6512-4fe7-bfe8-b56cca27c23b)) - (segment (start 71.993 89.3417) (end 71.993 130.895) (width 0.25) (layer "F.Cu") (net 14) (tstamp e71206d0-2c47-4a18-b799-e120635c32c0)) - (via (at 71.993 89.3417) (size 0.8) (drill 0.4) (layers "F.Cu" "B.Cu") (net 14) (tstamp 6745eadc-a326-4828-968d-40149ee02b9c)) - (via (at 71.993 130.895) (size 0.8) (drill 0.4) (layers "F.Cu" "B.Cu") (net 14) (tstamp da7e2f3d-6a3d-4336-89bf-fa2b660c52a9)) - (segment (start 65.115 88.4999) (end 66.2361 89.621) (width 0.25) (layer "B.Cu") (net 14) (tstamp 44c9fbd7-3e6c-4f9f-a9aa-cbf9eb94339f)) - (segment (start 67.02 135.84) (end 71.9652 130.895) (width 0.25) (layer "B.Cu") (net 14) (tstamp 55a88de6-1015-463d-8152-70fedcfb064a)) - (segment (start 71.7137 89.621) (end 71.993 89.3417) (width 0.25) (layer "B.Cu") (net 14) (tstamp 681fecbd-1830-4319-a4eb-42d9b2d8200b)) - (segment (start 66.2361 89.621) (end 71.7137 89.621) (width 0.25) (layer "B.Cu") (net 14) (tstamp bced0748-3286-497f-ae13-16e6340c61ac)) - (segment (start 71.9652 130.895) (end 71.993 130.895) (width 0.25) (layer "B.Cu") (net 14) (tstamp ea09fdd4-7fcb-4ea7-932c-612be1cc212e)) - (segment (start 65.115 87.409) (end 65.115 88.4999) (width 0.25) (layer "B.Cu") (net 14) (tstamp f69e1b79-d430-4766-893a-12271e1f07d6)) - (segment (start 67.02 106.931) (end 67.02 110.44) (width 0.25) (layer "F.Cu") (net 15) (tstamp 2910ffe7-604c-4c0c-92f1-d80a476295d5)) - (segment (start 54.32 83.13) (end 53.69 82.5) (width 0.25) (layer "F.Cu") (net 15) (tstamp 3922cd73-735e-4b43-8249-8f5016ce11a9)) - (segment (start 54.32 87.58) (end 54.32 83.13) (width 0.25) (layer "F.Cu") (net 15) (tstamp 475ceb0f-2125-4176-a545-b93ccaccc8e8)) - (segment (start 61.94 95.2) (end 61.94 101.851) (width 0.25) (layer "F.Cu") (net 15) (tstamp 6c0e36f5-45c4-4998-9874-6ae5edd9c3ff)) - (segment (start 61.94 101.851) (end 67.02 106.931) (width 0.25) (layer "F.Cu") (net 15) (tstamp 7296ec70-977c-49dd-9deb-9bb59ba7a870)) - (segment (start 58.3644 94.7814) (end 61.4057 91.7401) (width 0.25) (layer "B.Cu") (net 15) (tstamp 09c17a1b-c829-4891-af5d-6b9d4636f772)) - (segment (start 68.925 91.7401) (end 68.925 92.831) (width 0.25) (layer "B.Cu") (net 15) (tstamp 0c13af30-6978-4c11-9ea3-420ba2531c89)) - (segment (start 61.4057 91.7401) (end 68.925 91.7401) (width 0.25) (layer "B.Cu") (net 15) (tstamp 22f17e60-7d79-4936-b43a-ff8af616a405)) - (segment (start 61.4057 91.7401) (end 58.4801 91.7401) (width 0.25) (layer "B.Cu") (net 15) (tstamp 78fed139-5eaf-49fc-9910-d10f12339d29)) - (segment (start 61.94 95.2) (end 60.9131 95.2) (width 0.25) (layer "B.Cu") (net 15) (tstamp 96f7d759-9760-4750-82ea-297b16461ed8)) - (segment (start 58.3644 95.7155) (end 58.3644 94.7814) (width 0.25) (layer "B.Cu") (net 15) (tstamp a45f40d4-b978-47b7-84ce-041919e2732e)) - (segment (start 60.9131 95.2) (end 59.8674 96.2457) (width 0.25) (layer "B.Cu") (net 15) (tstamp b65b2349-5006-446b-8e4e-8ef2abbbd3d6)) - (segment (start 59.8674 96.2457) (end 58.8946 96.2457) (width 0.25) (layer "B.Cu") (net 15) (tstamp bad9567c-8494-4f2c-a2d8-616e5ae3134c)) - (segment (start 58.8946 96.2457) (end 58.3644 95.7155) (width 0.25) (layer "B.Cu") (net 15) (tstamp d0a3cc18-d901-4332-9a9f-251f38b82aa0)) - (segment (start 58.4801 91.7401) (end 54.32 87.58) (width 0.25) (layer "B.Cu") (net 15) (tstamp d74b8be1-f3d3-4ae9-9ba4-ab20e1ae50d4)) - (segment (start 67.02 117.183) (end 66.1431 116.306) (width 0.25) (layer "F.Cu") (net 16) (tstamp 00cabc8d-c100-45fd-a637-c0db99669427)) - (segment (start 59.4 102.82) (end 59.4 95.2) (width 0.25) (layer "F.Cu") (net 16) (tstamp 14f836c7-f4c6-48a2-a7d3-4e75e85acc7a)) - (segment (start 66.1431 116.306) (end 66.1431 109.563) (width 0.25) (layer "F.Cu") (net 16) (tstamp 27a5431f-bd2c-4dba-8fce-f7761532ed6a)) - (segment (start 61.94 105.36) (end 59.4 102.82) (width 0.25) (layer "F.Cu") (net 16) (tstamp 6a77169d-27c3-4a31-9c60-4d382d5f35bd)) - (segment (start 66.1431 109.563) (end 61.94 105.36) (width 0.25) (layer "F.Cu") (net 16) (tstamp 73cdbe46-1aab-4b3b-a95a-46ee80046098)) - (segment (start 59.4 90.12) (end 59.4 95.2) (width 0.25) (layer "F.Cu") (net 16) (tstamp 75391f0c-3271-4ec5-aaac-a2a1e343d223)) - (segment (start 59.4 90.12) (end 60.67 88.85) (width 0.25) (layer "F.Cu") (net 16) (tstamp 7988efa7-b56d-4fb0-8e46-9b1fceee1924)) - (segment (start 60.67 88.85) (end 60.67 69.8) (width 0.25) (layer "F.Cu") (net 16) (tstamp b211ee2c-923e-4dc7-934f-102069ae344e)) - (segment (start 67.02 118.06) (end 67.02 117.183) (width 0.25) (layer "F.Cu") (net 16) (tstamp c7e90134-c1ca-41d2-9f2b-326e7eb00edf)) - (segment (start 60.6781 93.9219) (end 59.4 95.2) (width 0.25) (layer "B.Cu") (net 16) (tstamp 5d8a60ec-b607-42fb-bd54-f442e57b58e1)) - (segment (start 65.115 92.831) (end 65.115 93.9219) (width 0.25) (layer "B.Cu") (net 16) (tstamp a66f2ae3-4e0d-4e5c-ad5d-28687e29946e)) - (segment (start 65.115 93.9219) (end 60.6781 93.9219) (width 0.25) (layer "B.Cu") (net 16) (tstamp b8a0e001-7d95-4223-b6dc-ac505a30a25f)) - (segment (start 76.545 87.409) (end 76.545 86.97) (width 0.25) (layer "B.Cu") (net 17) (tstamp 15fb4488-c77b-4ed5-943c-3aecb1e90899)) - (segment (start 76.545 86.97) (end 76.545 86.3181) (width 0.25) (layer "B.Cu") (net 17) (tstamp 4fc93a51-8800-4e0e-8544-1948b010618d)) - (segment (start 76.545 86.3181) (end 77.18 85.6831) (width 0.25) (layer "B.Cu") (net 17) (tstamp 5346eda4-b8c3-425a-b209-9c2387e42948)) - (segment (start 76.545 86.97) (end 81.015 82.5) (width 0.25) (layer "B.Cu") (net 17) (tstamp 782f273c-d66f-494a-a334-82534584f161)) - (segment (start 81.015 82.5) (end 90.51 82.5) (width 0.25) (layer "B.Cu") (net 17) (tstamp c4d23696-79ef-48b8-924d-71124997f7d1)) - (segment (start 76.545 87.409) (end 76.545 86.97) (width 0.25) (layer "B.Cu") (net 17) (tstamp db1e748a-a37c-45e4-8908-7c0726ef47e5)) - (segment (start 77.18 85.6831) (end 77.18 69.8) (width 0.25) (layer "B.Cu") (net 17) (tstamp e8952c88-2ff7-4c9a-93a7-0b443318542b)) - (segment (start 81.235 103.433368) (end 81.535 103.733368) (width 0.25) (layer "F.Cu") (net 18) (tstamp 38ff7c46-3302-4c46-97b4-01524f2ca987)) - (segment (start 82.26 85.04) (end 81.235 86.065) (width 0.25) (layer "F.Cu") (net 18) (tstamp 712642e8-978d-42f8-891f-fb049b9a03a8)) - (segment (start 81.235 86.065) (end 81.235 103.433368) (width 0.25) (layer "F.Cu") (net 18) (tstamp fd70234b-9e1f-48f4-9457-dd2fb950e815)) - (via (at 81.535 103.733368) (size 0.8) (drill 0.4) (layers "F.Cu" "B.Cu") (free) (net 18) (tstamp 90e0f111-236a-4b30-a086-7725295994ec)) - (via (at 82.26 85.04) (size 0.8) (drill 0.4) (layers "F.Cu" "B.Cu") (free) (net 18) (tstamp afc373d2-a652-40d4-9e6d-d2ad495edf5f)) - (segment (start 77.815 86.945) (end 79.72 85.04) (width 0.25) (layer "B.Cu") (net 18) (tstamp 063fbf71-f8cb-4d1a-a803-e692529302e5)) - (segment (start 81.535 103.733368) (end 81.423368 103.845) (width 0.25) (layer "B.Cu") (net 18) (tstamp 0fed3795-646d-493f-a00a-9135fcf25d98)) - (segment (start 81.423368 103.845) (end 78.205 103.845) (width 0.25) (layer "B.Cu") (net 18) (tstamp 3f64d733-b10d-4eb1-9924-5c351fb08947)) - (segment (start 77.815 87.409) (end 77.815 86.945) (width 0.25) (layer "B.Cu") (net 18) (tstamp 5ea56ae5-168a-4b8d-8b7f-9725c2305690)) - (segment (start 79.72 85.04) (end 82.26 85.04) (width 0.25) (layer "B.Cu") (net 18) (tstamp 6369661c-b339-4912-a714-0fe29e7017ba)) - (segment (start 78.205 103.845) (end 77.18 102.82) (width 0.25) (layer "B.Cu") (net 18) (tstamp f3f332f9-f8c1-47bd-bf81-dcb08f220c34)) - (segment (start 77.815 96.712) (end 80.1524 96.712) (width 0.25) (layer "B.Cu") (net 19) (tstamp 3e5c4264-ebe0-4943-a1e2-ed5cdc893266)) - (segment (start 80.7799 97.3395) (end 80.7799 100.733) (width 0.25) (layer "B.Cu") (net 19) (tstamp 648291b4-1793-4d0d-8844-5b3e4252de96)) - (segment (start 80.1524 96.712) (end 80.7799 97.3395) (width 0.25) (layer "B.Cu") (net 19) (tstamp 7b38de57-0ae7-481e-9235-37862d438bee)) - (segment (start 77.815 97.105) (end 77.18 97.74) (width 0.25) (layer "B.Cu") (net 19) (tstamp 87ca52d1-e702-47fc-bf24-185407e7a018)) - (segment (start 77.815 92.831) (end 77.815 96.712) (width 0.25) (layer "B.Cu") (net 19) (tstamp bf93c692-d5e7-42ec-bb4e-a4c87b3c3782)) - (segment (start 77.815 96.712) (end 77.815 97.105) (width 0.25) (layer "B.Cu") (net 19) (tstamp c2a0763b-38c3-4b07-9c87-46a3bd0f3d36)) - (segment (start 79.72 101.793) (end 79.72 102.82) (width 0.25) (layer "B.Cu") (net 19) (tstamp d7783c50-c985-44d8-b643-48f90045348d)) - (segment (start 80.7799 100.733) (end 79.72 101.793) (width 0.25) (layer "B.Cu") (net 19) (tstamp ede63222-c37a-4bfc-8ce8-f8abc11abb36)) - (segment (start 70.19 72.97) (end 67.02 69.8) (width 0.25) (layer "F.Cu") (net 20) (tstamp 608f77e5-afeb-4db6-8b4c-46e82aba6c44)) - (segment (start 70.19 82.5) (end 70.19 72.97) (width 0.25) (layer "F.Cu") (net 20) (tstamp c316ca98-7217-449e-a56d-91f1b9718488)) - (segment (start 66.385 86.305) (end 70.19 82.5) (width 0.25) (layer "B.Cu") (net 20) (tstamp 0fd89712-c318-48bb-86be-fa4d0ee029b8)) - (segment (start 66.385 87.409) (end 66.385 86.305) (width 0.25) (layer "B.Cu") (net 20) (tstamp 9d60bca0-1292-4f02-b5a1-6818b95ba169)) - (segment (start 63.408 92.7469) (end 67.2882 88.8667) (width 0.25) (layer "F.Cu") (net 21) (tstamp 13d023bc-9d85-4068-b227-fc5b7a565a47)) - (segment (start 64.48 102.82) (end 63.408 101.748) (width 0.25) (layer "F.Cu") (net 21) (tstamp b74df6aa-35da-4837-a2e6-84a929020af0)) - (segment (start 63.408 101.748) (end 63.408 92.7469) (width 0.25) (layer "F.Cu") (net 21) (tstamp b853bc9c-82f1-41c5-865a-8f6dc4b063c1)) - (via (at 67.2882 88.8667) (size 0.8) (drill 0.4) (layers "F.Cu" "B.Cu") (net 21) (tstamp 7371fcbc-d990-417b-9c77-ee18d76d9c18)) - (segment (start 67.655 88.4999) (end 67.2882 88.8667) (width 0.25) (layer "B.Cu") (net 21) (tstamp 0aca4605-d128-4db8-97d3-71b36608bbbd)) - (segment (start 67.655 87.409) (end 67.655 88.4999) (width 0.25) (layer "B.Cu") (net 21) (tstamp 675e5738-7367-4fbd-b9e2-c18920357f16)) - (segment (start 64.48 99.2531) (end 64.48 97.74) (width 0.25) (layer "F.Cu") (net 22) (tstamp 05a512b3-b2a0-4588-aa5f-f0e916ade693)) - (segment (start 67.02 101.793) (end 64.48 99.2531) (width 0.25) (layer "F.Cu") (net 22) (tstamp 59162bae-baf1-41e6-876f-3c170a31c870)) - (segment (start 67.02 102.82) (end 67.02 101.793) (width 0.25) (layer "F.Cu") (net 22) (tstamp 8ccc9c35-dea0-4b35-a02f-925a9b479e49)) - (segment (start 68.0616 98.1759) (end 67.4514 98.7861) (width 0.25) (layer "B.Cu") (net 22) (tstamp 39fe054d-90d4-4a40-b218-56599c5f40db)) - (segment (start 67.655 92.831) (end 67.655 93.9219) (width 0.25) (layer "B.Cu") (net 22) (tstamp 4d85a315-8755-4acd-a8a5-e11dc98c56a8)) - (segment (start 67.655 93.9219) (end 68.0616 94.3285) (width 0.25) (layer "B.Cu") (net 22) (tstamp b4e069a2-72f4-4b60-8e22-754acc96e87a)) - (segment (start 68.0616 94.3285) (end 68.0616 98.1759) (width 0.25) (layer "B.Cu") (net 22) (tstamp cf2347a4-b616-42dd-82c4-3e8831a95ae1)) - (segment (start 65.5261 98.7861) (end 64.48 97.74) (width 0.25) (layer "B.Cu") (net 22) (tstamp dc55bf62-9fd2-4d96-b49a-5377c281e192)) - (segment (start 67.4514 98.7861) (end 65.5261 98.7861) (width 0.25) (layer "B.Cu") (net 22) (tstamp e018ca69-42c2-4dd7-a638-951a090e6e08)) - (segment (start 87.34 130.76) (end 87.34 151.08) (width 0.25) (layer "F.Cu") (net 23) (tstamp 5af7fdc9-f6dc-4736-bf14-91c7c0b2619b)) - (segment (start 87.34 151.08) (end 82.26 156.16) (width 0.25) (layer "F.Cu") (net 23) (tstamp 9cc93276-0e29-4094-8a03-345dfcbd198f)) - (segment (start 82.26 130.76) (end 82.26 151.08) (width 0.25) (layer "F.Cu") (net 24) (tstamp 20cef1fc-af0f-4b59-9d11-c24cc50e6dc2)) - (segment (start 82.26 151.08) (end 77.18 156.16) (width 0.25) (layer "F.Cu") (net 24) (tstamp df803807-b0c8-4f87-8ba8-e20a8f26b6ef)) - (segment (start 56.86 151.08) (end 61.94 156.16) (width 0.25) (layer "F.Cu") (net 25) (tstamp 38341714-caa4-4f5a-8229-91df7acc3f58)) - (segment (start 56.86 130.76) (end 56.86 151.08) (width 0.25) (layer "F.Cu") (net 25) (tstamp 8beb86d4-1bbc-429a-ac58-7a070fe8ff8b)) - (segment (start 64.4844 153.624) (end 67.02 156.16) (width 0.25) (layer "F.Cu") (net 26) (tstamp 18ef5a20-c8d3-4071-be43-07b7a6fb1c73)) - (segment (start 64.4844 138.542) (end 64.4844 153.624) (width 0.25) (layer "F.Cu") (net 26) (tstamp 47ef807b-b281-4de9-8565-96981b28e991)) - (segment (start 62.5556 136.613) (end 64.4844 138.542) (width 0.25) (layer "F.Cu") (net 26) (tstamp 5f13957e-bdbf-4b30-91de-426889aa6dcc)) - (segment (start 61.94 131.787) (end 62.5556 132.402) (width 0.25) (layer "F.Cu") (net 26) (tstamp b252279e-62aa-430e-9c8d-2aa3674c6203)) - (segment (start 62.5556 132.402) (end 62.5556 136.613) (width 0.25) (layer "F.Cu") (net 26) (tstamp dbe52a5c-087a-4eb5-9e2f-d99eaff09807)) - (segment (start 61.94 130.76) (end 61.94 131.787) (width 0.25) (layer "F.Cu") (net 26) (tstamp e9b6b720-aef4-4a33-b698-8530db7a71d0)) - +(kicad_pcb + (version 20241229) + (generator "pcbnew") + (generator_version "9.0") + (general + (thickness 1.6) + (legacy_teardrops no) + ) + (paper "A4") + (layers + (0 "F.Cu" signal) + (2 "B.Cu" signal) + (9 "F.Adhes" user "F.Adhesive") + (11 "B.Adhes" user "B.Adhesive") + (13 "F.Paste" user) + (15 "B.Paste" user) + (5 "F.SilkS" user "F.Silkscreen") + (7 "B.SilkS" user "B.Silkscreen") + (1 "F.Mask" user) + (3 "B.Mask" user) + (17 "Dwgs.User" user "User.Drawings") + (19 "Cmts.User" user "User.Comments") + (21 "Eco1.User" user "User.Eco1") + (23 "Eco2.User" user "User.Eco2") + (25 "Edge.Cuts" user) + (27 "Margin" user) + (31 "F.CrtYd" user "F.Courtyard") + (29 "B.CrtYd" user "B.Courtyard") + (35 "F.Fab" user) + (33 "B.Fab" user) + (39 "User.1" user) + (41 "User.2" user) + (43 "User.3" user) + (45 "User.4" user) + (47 "User.5" user) + (49 "User.6" user) + (51 "User.7" user) + (53 "User.8" user) + (55 "User.9" user) + ) + (setup + (stackup + (layer "F.SilkS" + (type "Top Silk Screen") + ) + (layer "F.Paste" + (type "Top Solder Paste") + ) + (layer "F.Mask" + (type "Top Solder Mask") + (thickness 0.01) + ) + (layer "F.Cu" + (type "copper") + (thickness 0.035) + ) + (layer "dielectric 1" + (type "core") + (thickness 1.51) + (material "FR4") + (epsilon_r 4.5) + (loss_tangent 0.02) + ) + (layer "B.Cu" + (type "copper") + (thickness 0.035) + ) + (layer "B.Mask" + (type "Bottom Solder Mask") + (thickness 0.01) + ) + (layer "B.Paste" + (type "Bottom Solder Paste") + ) + (layer "B.SilkS" + (type "Bottom Silk Screen") + ) + (copper_finish "None") + (dielectric_constraints no) + ) + (pad_to_mask_clearance 0) + (allow_soldermask_bridges_in_footprints no) + (tenting front back) + (grid_origin 219.42 67.26) + (pcbplotparams + (layerselection 0x00000000_00000000_55555555_5755f5ff) + (plot_on_all_layers_selection 0x00000000_00000000_00000000_00000000) + (disableapertmacros no) + (usegerberextensions no) + (usegerberattributes yes) + (usegerberadvancedattributes yes) + (creategerberjobfile yes) + (dashed_line_dash_ratio 12.000000) + (dashed_line_gap_ratio 3.000000) + (svgprecision 4) + (plotframeref no) + (mode 1) + (useauxorigin no) + (hpglpennumber 1) + (hpglpenspeed 20) + (hpglpendiameter 15.000000) + (pdf_front_fp_property_popups yes) + (pdf_back_fp_property_popups yes) + (pdf_metadata yes) + (pdf_single_document no) + (dxfpolygonmode yes) + (dxfimperialunits yes) + (dxfusepcbnewfont yes) + (psnegative no) + (psa4output no) + (plot_black_and_white yes) + (sketchpadsonfab no) + (plotpadnumbers no) + (hidednponfab no) + (sketchdnponfab yes) + (crossoutdnponfab yes) + (subtractmaskfromsilk no) + (outputformat 1) + (mirror no) + (drillshape 0) + (scaleselection 1) + (outputdirectory "Gerbers") + ) + ) + (net 0 "") + (net 1 "Net-(D1-K)") + (net 2 "Net-(C3-Pad1)") + (net 3 "GND") + (net 4 "Net-(C3-Pad2)") + (net 5 "Net-(C4-Pad1)") + (net 6 "Net-(C4-Pad2)") + (net 7 "Net-(C5-Pad1)") + (net 8 "Net-(VCC_A2-Pin_1)") + (net 9 "Net-(D2-K)") + (net 10 "Net-(C10-Pad1)") + (net 11 "Net-(C10-Pad2)") + (net 12 "Net-(C11-Pad1)") + (net 13 "Net-(C11-Pad2)") + (net 14 "Net-(C12-Pad1)") + (net 15 "Net-(VCC_B2-Pin_1)") + (net 16 "Net-(SGNL_A1-Pin_1)") + (net 17 "Net-(IC1-Pad6)") + (net 18 "Net-(SGNL_B1-Pin_1)") + (net 19 "Net-(IC2-Pad6)") + (net 20 "Net-(X3A1-Pin_1)") + (net 21 "Net-(X2A1-Pin_1)") + (net 22 "Net-(X3B1-Pin_1)") + (net 23 "Net-(X2B1-Pin_1)") + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "04cdfa84-93d5-4ee1-9040-d0312d749bd6") + (at 59.4 90.12 90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "C13" + (at -0.553201 2.439254 0) + (layer "F.SilkS") + (uuid "e7e3fa75-c2fc-46bd-b988-524e73c7524b") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "0.1uF" + (at 1.27 1.92 90) + (layer "F.Fab") + (hide yes) + (uuid "ce2f5b5c-0c53-4205-ac98-785d789f2ec6") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 90) + (layer "F.Fab") + (hide yes) + (uuid "99a171f8-9625-49fc-a5b8-00ecc1dfe041") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Unpolarized capacitor" + (at 0 0 90) + (layer "F.Fab") + (hide yes) + (uuid "824d88c7-f6c2-4e91-9ae8-997eb47dff0d") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/b34f1ed3-ca84-4b39-accd-7cbb7c08ede6") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "745c8e4d-5da7-4f44-a20b-25864bf10001") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "c0f7a03c-0ad2-4804-b3e1-d1ac01f576fd") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "a9b74ddf-5cee-4a52-a165-56c2b02c46ad") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "e863d924-af2c-44ae-b0a1-73e980de9875") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "eba0052a-3f0c-4850-9d3c-a37d54f8bac2") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "1eae90c6-3259-484a-a33a-023af40e32a2") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "22681448-812a-4abe-abcf-60313ea09da1") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "2e2a2d8e-b46f-4391-8379-816526a0f339") + ) + (pad "1" thru_hole circle + (at 0 0 90) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 15 "Net-(VCC_B2-Pin_1)") + (pintype "passive") + (uuid "b5037d99-8272-4e16-b39b-a2a20234e7f1") + ) + (pad "2" thru_hole oval + (at 2.54 0 90) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 3 "GND") + (pintype "passive") + (uuid "8d847d48-72e1-4c36-9931-8cfb4dfd1ac0") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "06a23103-0375-47b9-9d2d-e1886a061500") + (at 64.48 97.74) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "R16" + (at 0.213146 1.746691 0) + (layer "F.SilkS") + (uuid "1b011455-2b58-4f34-b9d0-ea77e5f68ec2") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "2.2K" + (at 1.27 1.92 0) + (layer "F.Fab") + (hide yes) + (uuid "ef3764f3-5e9f-4c05-88e7-b69168ea8607") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "91bdbace-9809-481b-9084-ca80c88b9e61") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Resistor" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "27fbf73c-8e77-4bb2-a662-26a8af54dfff") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/4dfa4bfd-4e46-43b4-9020-c77e950185e1") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "47428e46-80cf-4a9f-80bc-774e2dd5d84d") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "f7bbf5bd-0860-4583-9c9e-02e22a08a8ca") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "d1435468-f3f3-4c95-9254-edc5fe1e7538") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "9a547cd5-433e-453c-8217-3d6746024354") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "2d3b1bb4-93db-4bf5-ab00-d504ab21e1e5") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "14f2f782-d3d5-457e-9b44-ac104f15b4ed") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "e0df1665-27fd-449f-aca0-82f2114c64b9") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "1ae364a0-6e8b-4707-be25-86ad093f8d15") + ) + (pad "1" thru_hole circle + (at 0 0) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 19 "Net-(IC2-Pad6)") + (pintype "passive") + (uuid "c51b7066-bde8-48bc-b0e5-883836bab8a4") + ) + (pad "2" thru_hole oval + (at 2.54 0) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 11 "Net-(C10-Pad2)") + (pintype "passive") + (uuid "d1473500-173c-4d85-985c-932b6bfdb702") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "MountingHole:MountingHole_2.7mm_M2.5_ISO14580" + (layer "F.Cu") + (uuid "06a73276-4738-419b-bc90-44210544e3fe") + (at 57.495 77.591) + (descr "Mounting Hole 2.7mm, no annular, M2.5, ISO14580") + (tags "mounting hole 2.7mm no annular m2.5 iso14580") + (property "Reference" "H1" + (at 0 -3.25 0) + (layer "F.SilkS") + (hide yes) + (uuid "db699c64-ba8b-4e68-8122-4b315359b5f2") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "M2.5" + (at 0 3.25 0) + (layer "F.Fab") + (hide yes) + (uuid "cfbd51a1-0b26-4952-a8eb-b6f8c7a75f1f") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "fe06deb1-e50b-4713-8866-18a7ce472bb0") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Mounting Hole without connection" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "1b997168-1814-4f06-9b5e-585278a8b8bd") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (sheetfile "StudioMic.kicad_sch") + (attr exclude_from_pos_files) + (fp_circle + (center 0 0) + (end 2.25 0) + (stroke + (width 0.15) + (type solid) + ) + (fill no) + (layer "Cmts.User") + (uuid "86a7048d-682a-4ad8-af23-3a4be441d615") + ) + (fp_circle + (center 0 0) + (end 2.5 0) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + (uuid "e1b489b6-5af7-44d0-b23a-7914f8af8879") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (uuid "f0bc4919-5f99-45ba-a4ae-986c8f04c10a") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "" np_thru_hole oval + (at 0 0) + (size 3.5 2.7) + (drill oval 3.5 2.7) + (layers "*.Cu" "*.Mask") + (thermal_bridge_angle 45) + (uuid "3cc6757b-2ef4-4f86-953d-f8e25ecdb6dc") + ) + (embedded_fonts no) + ) + (footprint "Library:conn_holepad" + (layer "F.Cu") + (uuid "0d7d7047-21e2-4464-b6ae-828a43548935") + (at 72.1 156.16) + (property "Reference" "X1" + (at 0 -0.5 0) + (unlocked yes) + (layer "F.SilkS") + (uuid "7f7ff3c7-87d0-4667-be20-a77440a2a01c") + (effects + (font + (size 1 1) + (thickness 0.1) + ) + ) + ) + (property "Value" "Conn_01x01_Pin" + (at 0 1 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "c5175324-d7b3-48f1-adc1-e4e54a5cd289") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "6112b270-056d-4e39-b09d-ea9f0e61f0f7") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Generic connector, single row, 01x01, script generated" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "3509b8bc-f0b9-40e0-a314-7585e47c60a0") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/cf4c5d8d-0c85-43b3-b2ab-eff2610198e1") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_text user "${REFERENCE}" + (at 0 2.5 0) + (unlocked yes) + (layer "F.Fab") + (uuid "7ed70e4d-fab4-4234-92b1-1e035f55ae07") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" thru_hole circle + (at 0 0) + (size 3 3) + (drill 1.5) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 3 "GND") + (pinfunction "Pin_1") + (pintype "passive") + (uuid "ad89e844-d3c4-47e7-9865-ad19d0aeab33") + ) + (embedded_fonts no) + ) + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "164b3322-14a0-4ba8-9213-866bdfffe114") + (at 87.34 128.22 -90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "R1" + (at 2.891733 -1.937033 180) + (layer "F.SilkS") + (uuid "7016fc18-6df7-4cf0-8145-a161da92d943") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "47" + (at 1.27 1.92 270) + (layer "F.Fab") + (hide yes) + (uuid "e31afb44-10ca-4053-8616-df692abfbf50") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "20846b89-4318-4f16-920b-fbe952d2e2d4") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Resistor" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "00b86c2c-5baf-41ef-b6ce-0893e1b922f8") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/465be87b-5590-4da0-9122-4e5009c124ff") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "e7e0f93e-e037-4307-af8c-630d93f2aa8a") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "8fd70b97-3f7d-4c7e-abe2-00c7ca6df05b") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "1a97f59e-5a9d-4fd5-9bf9-a9d39bedf1cb") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "39517e59-18cd-48a5-bcb7-8bf4d2de6838") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "af0a02c1-a929-4b4e-b125-5da65e8f33ed") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "f43bdfe6-564a-4250-8e73-3c83a173bd64") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "bfdb51a1-8150-408a-bb28-4b074f64ebd1") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "3a6c1c4a-911d-40ad-8a7f-6d0b0329704d") + ) + (pad "1" thru_hole circle + (at 0 0 270) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 2 "Net-(C3-Pad1)") + (pintype "passive") + (uuid "f0f0b9e2-bd1e-4cc8-85f4-83d16144d318") + ) + (pad "2" thru_hole oval + (at 2.54 0 270) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 20 "Net-(X3A1-Pin_1)") + (pintype "passive") + (uuid "cc2e40ce-5b5d-47d5-9c39-cebc9b9d3fd4") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "208db086-01b9-4ed9-8543-986ef572fe92") + (at 77.18 97.74) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "R6" + (at -0.259885 1.754152 0) + (layer "F.SilkS") + (uuid "0aca9955-60e9-44e0-9b6c-0673e92a1bcc") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "2.2K" + (at 1.27 1.92 0) + (layer "F.Fab") + (hide yes) + (uuid "9f35ce26-b6ae-4de0-bbf1-13f812364108") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "0e6a0dfd-1138-4298-b221-9a236b0b4271") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Resistor" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "d8d6aa99-6ccd-4fa4-9a53-66ca1198eba6") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/a10f13f8-a81d-4f2b-b313-a7028981413d") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "2fe2d874-de20-4f50-aafe-96a141e37236") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "873de376-52d5-43c4-a3cf-fa43f1d91a6f") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "7da9831c-3ac5-441e-9859-47efbb9b4b85") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "90c21000-2a25-4b9e-8305-003112da7640") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "3828b049-eab0-4a39-add4-64ff0e3d2fc6") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "c790dc29-510a-44c4-9754-0b53eb2d62ee") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "f4469cae-83d4-4671-b3dc-cb8150bebbad") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "b74a22cd-66c2-4c85-880a-37aa0029f00d") + ) + (pad "1" thru_hole circle + (at 0 0) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 17 "Net-(IC1-Pad6)") + (pintype "passive") + (uuid "da6cefdd-c164-40fc-a51f-ab348ab92b0d") + ) + (pad "2" thru_hole oval + (at 2.54 0) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 4 "Net-(C3-Pad2)") + (pintype "passive") + (uuid "ebbe8870-7fc2-4ceb-a65c-5a2171f4d779") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "215dd88a-87ca-494a-a87e-9f2137eb8bcb") + (at 64.48 102.82) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "R19" + (at 0.233664 1.740277 0) + (layer "F.SilkS") + (uuid "ddc6f61c-6d94-4c10-842f-360fa502ecc1") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "2.2K" + (at 1.27 1.92 0) + (layer "F.Fab") + (hide yes) + (uuid "1a7f7eb1-dc25-43f1-83ad-59d882f47eae") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "18806dda-b5ba-4aa2-9ed5-c68740803ba6") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Resistor" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "70712d6b-d354-44d4-8ea6-c5a62436e0ad") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/6a141024-0740-4682-ac78-fa29ac380bd3") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "badeb390-6d53-466d-aff9-81bbf6da38ad") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "029a0e5e-e7ae-492b-9ff2-574de22461f3") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "ec7c247d-f86f-4a08-91b3-cfc88f4bd7e4") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "2e918e54-78e1-4f97-b913-94819b0bc914") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "88b9d459-fa74-4bd5-bc3f-c86be236b777") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "90b908c0-79fd-40ee-a14a-8228f512fcbb") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "a8c0ac93-33c2-4363-b797-c90d50793cf1") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "d58f5538-ec1a-44e2-8b3e-c6c7cd130711") + ) + (pad "1" thru_hole circle + (at 0 0) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 13 "Net-(C11-Pad2)") + (pintype "passive") + (uuid "172ce72e-ccd7-4e6f-bf49-9c982af2f8a7") + ) + (pad "2" thru_hole oval + (at 2.54 0) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 19 "Net-(IC2-Pad6)") + (pintype "passive") + (uuid "67d6f75c-3cb3-40df-9475-99436f887263") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "C47u35v:CAPPRD200W50D525H1250" + (layer "F.Cu") + (uuid "32127b65-24cd-4624-9ae5-38653049c6fb") + (at 67.02 110.44) + (descr "5*11") + (tags "Capacitor Polarised") + (property "Reference" "C12" + (at 0.961795 3.86902 0) + (layer "F.SilkS") + (uuid "a9957f41-43ff-475f-89a8-e195d0a1f43f") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Value" "47uF 35v" + (at 0 0 0) + (layer "F.SilkS") + (hide yes) + (uuid "e51d3d8e-d78e-45d0-85c2-d3ba4279a56f") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "51a81c25-57d9-4e59-8d0d-8f1b3aac7e99") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Polarized capacitor" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "65639150-8588-40ff-a25e-81d4f84e950b") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/26f9efc1-f18f-46a4-a4e0-fd7b825b179e") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_circle + (center 1 0) + (end 1 2.625) + (stroke + (width 0.2) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "2bb7e679-2791-4f57-9c61-cfc474e0e80f") + ) + (fp_circle + (center 1 0) + (end 1 2.625) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "19d2fcb9-ae5f-425b-bc59-e96493cb05dd") + ) + (pad "1" thru_hole rect + (at 0 0) + (size 1.1 1.1) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 14 "Net-(C12-Pad1)") + (pintype "passive") + (uuid "c725d7fb-d2d8-4859-8e5e-0d3cd4be4321") + ) + (pad "2" thru_hole circle + (at 2 0) + (size 1.1 1.1) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 3 "GND") + (pintype "passive") + (uuid "310bfc25-4982-4fe7-aa75-f08bb0a76949") + ) + (embedded_fonts no) + (model "UVZ1V470MDD1TA.stp" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "C47u63v:CAPPRD350W65D800H1250" + (layer "F.Cu") + (uuid "37069337-d408-4d28-ac1d-b25de44e20ba") + (at 63.52 135.84) + (descr "EEU-EB1J470SJ-1") + (tags "Capacitor Polarised") + (property "Reference" "C11" + (at 1.709261 2.164442 0) + (layer "F.SilkS") + (uuid "efeb1898-966a-4c7b-ac2d-f79e09f509ca") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Value" "47uF 63v" + (at 0 0 0) + (layer "F.SilkS") + (hide yes) + (uuid "c4b08a4f-d1f7-4276-99d8-74f1dea09338") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "a81e3499-7e42-4a29-9a1d-639f7208b476") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Polarized capacitor" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "0f717ee9-9705-4c77-a72d-c1ce408c9391") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/388d7ed8-52d9-442b-b762-60006c60c529") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_circle + (center 1.75 0) + (end 1.75 4) + (stroke + (width 0.2) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "bd041b97-4b7b-4601-a3e6-92cb52905170") + ) + (fp_circle + (center 1.75 0) + (end 1.75 4) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "2a90a626-31fc-44ea-973c-68f14242f186") + ) + (pad "1" thru_hole rect + (at 0 0) + (size 1.275 1.275) + (drill 0.85) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 12 "Net-(C11-Pad1)") + (pintype "passive") + (uuid "a87da594-d52e-48a4-9306-98eccacfff4f") + ) + (pad "2" thru_hole circle + (at 3.5 0) + (size 1.275 1.275) + (drill 0.85) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 13 "Net-(C11-Pad2)") + (pintype "passive") + (uuid "e2005726-d1f9-4de6-a5ac-fea150879263") + ) + (embedded_fonts no) + (model "EEU-EB1J470SJ.stp" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "3edb5673-b873-4087-ac88-b8b0ecba1c97") + (at 61.94 120.6 -90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "R14" + (at 2.965707 -2.432316 0) + (layer "F.SilkS") + (uuid "2bbcab44-528c-4516-b9a6-48c027d9a8ec") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "2.2K" + (at 1.27 1.92 90) + (layer "F.Fab") + (hide yes) + (uuid "8d796ea7-ed94-4592-8a98-dd6460c51c59") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "6e1005d0-ed84-4d43-8ec8-59b7740e9b46") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Resistor" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "ef829e0e-20d8-4d16-95ea-573e2bef7238") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/22c624a2-9c69-4937-8b4e-0e03aaaaa038") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "3b102618-2d75-4f74-b80d-3a5c015423b2") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "079cee2c-a811-4792-b517-17f45a894a3d") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "d27eae09-ea9e-442f-8117-e72b36a13ed9") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "5e4844c5-86c5-438f-8c69-462750e00b78") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "491cdf89-6ee8-42c3-8c68-9bc522986db6") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "65a2bd31-6e08-4daf-b2a8-926623b9f20f") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "264d4c99-5502-4860-8c6b-357e5045764d") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "a0cbd4b8-6f2f-497a-89c6-30f41cc9e073") + ) + (pad "1" thru_hole circle + (at 0 0 270) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 9 "Net-(D2-K)") + (pintype "passive") + (uuid "1c7dc787-e6e2-4ec7-aef7-b2c6000765ae") + ) + (pad "2" thru_hole oval + (at 2.54 0 270) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 12 "Net-(C11-Pad1)") + (pintype "passive") + (uuid "4a9a71a1-6087-485e-9dc3-e78a801a3398") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "C47u35v:CAPPRD200W50D525H1250" + (layer "F.Cu") + (uuid "50645cf4-8007-4d77-8b63-fabebd482d62") + (at 67.02 125.68 -90) + (descr "5*11") + (tags "Capacitor Polarised") + (property "Reference" "C9" + (at 4.880074 -0.70564 0) + (layer "F.SilkS") + (uuid "2f9ed1ec-bcd5-45c0-bc46-ad72b6dad5fd") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Value" "47uF 35v" + (at 0 0 90) + (layer "F.SilkS") + (hide yes) + (uuid "b9bbc8b6-bb07-4c49-bb9e-eab0a2a1f3d2") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "0063325f-82f1-4873-9925-6eedddd57e15") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Polarized capacitor" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "3b494395-b991-47f2-8b63-205cb200aeb3") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/d1189f40-af74-4922-94ba-fe238cf5f19c") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_circle + (center 1 0) + (end 1 2.625) + (stroke + (width 0.2) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "6d3a5cb2-9489-47a6-ab4b-8dc365dfe226") + ) + (fp_circle + (center 1 0) + (end 1 2.625) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "60b9f829-6311-43f3-8287-1f07964f8e58") + ) + (pad "1" thru_hole rect + (at 0 0 270) + (size 1.1 1.1) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 9 "Net-(D2-K)") + (pintype "passive") + (uuid "7814e902-3d2d-49e5-b4f5-82be6ebcebcf") + ) + (pad "2" thru_hole circle + (at 2 0 270) + (size 1.1 1.1) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 3 "GND") + (pintype "passive") + (uuid "890ff405-654c-4d9f-93c2-0580d00c0ea5") + ) + (embedded_fonts no) + (model "UVZ1V470MDD1TA.stp" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "R1Go:RESAD1650W70L650D250" + (layer "F.Cu") + (uuid "5104b3e0-c4fe-42eb-b101-ccee056fc4c4") + (at 53.69 82.5) + (descr "RGP0207CHK1G0") + (tags "Resistor") + (property "Reference" "R20" + (at 0.63 2.54 0) + (layer "F.SilkS") + (uuid "8746d88e-59dc-4699-a145-8bad2f20e0fa") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Value" "1G" + (at 0 0 0) + (layer "F.SilkS") + (hide yes) + (uuid "a6e656f8-7716-4972-9d0a-6918430baeba") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "033966f3-3e6f-42cb-846c-8a331518d361") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Resistor" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "39938887-036e-486d-9e69-acef345b4f2e") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/621df7af-eee1-4ba7-b334-c8f75f6a97e7") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 1.025 0) + (end 5 0) + (stroke + (width 0.2) + (type solid) + ) + (layer "F.SilkS") + (uuid "378094dc-27db-4b38-a5ba-28d82dfc0369") + ) + (fp_line + (start 5 -1.25) + (end 11.5 -1.25) + (stroke + (width 0.2) + (type solid) + ) + (layer "F.SilkS") + (uuid "a7748322-8c5f-46cf-bd37-2fb01db21bc6") + ) + (fp_line + (start 5 1.25) + (end 5 -1.25) + (stroke + (width 0.2) + (type solid) + ) + (layer "F.SilkS") + (uuid "e286f56c-b764-4fd8-947f-4c9064d1f136") + ) + (fp_line + (start 11.5 -1.25) + (end 11.5 1.25) + (stroke + (width 0.2) + (type solid) + ) + (layer "F.SilkS") + (uuid "203edae9-b058-41e0-b169-692f5c9b4aca") + ) + (fp_line + (start 11.5 0) + (end 15.475 0) + (stroke + (width 0.2) + (type solid) + ) + (layer "F.SilkS") + (uuid "1e7d0371-3bb0-4b3c-a1e8-f3f81afd40de") + ) + (fp_line + (start 11.5 1.25) + (end 5 1.25) + (stroke + (width 0.2) + (type solid) + ) + (layer "F.SilkS") + (uuid "30941456-c4ee-4b5e-b2a0-dba0876787fb") + ) + (fp_line + (start -0.925 -1.6) + (end 17.425 -1.6) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "19e24384-4dc9-40f5-8b69-52afb8de8277") + ) + (fp_line + (start -0.925 1.6) + (end -0.925 -1.6) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "7921c54e-03fb-4873-a717-2904fdbc97cb") + ) + (fp_line + (start 17.425 -1.6) + (end 17.425 1.6) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "ff470143-b351-4dfe-866b-679817ca38bf") + ) + (fp_line + (start 17.425 1.6) + (end -0.925 1.6) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "9e8c624d-a666-4c46-aa6e-6d4117680901") + ) + (fp_line + (start 0 0) + (end 5 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "c9f22a6b-a010-4287-b248-6f1073552a37") + ) + (fp_line + (start 5 -1.25) + (end 11.5 -1.25) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "da0902d6-d4e7-4c5d-bd67-265ab1567f54") + ) + (fp_line + (start 5 1.25) + (end 5 -1.25) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "1eeb6b7e-98df-4357-86ac-9b6e40ecf6b6") + ) + (fp_line + (start 11.5 -1.25) + (end 11.5 1.25) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "884f6c53-b78a-49f4-82af-2883729a7adc") + ) + (fp_line + (start 11.5 0) + (end 16.5 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "7ddb31ac-1194-4c0c-90da-e6b149bfa01c") + ) + (fp_line + (start 11.5 1.25) + (end 5 1.25) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "e241adbb-49a6-4f7e-8e6b-fa858c0f5cff") + ) + (fp_text user "${REFERENCE}" + (at 0.63 2.54 0) + (layer "F.Fab") + (uuid "74ea7ca2-74ae-44c5-9190-0627748c8b38") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (pad "1" thru_hole circle + (at 0 0) + (size 1.35 1.35) + (drill 0.9) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 14 "Net-(C12-Pad1)") + (pintype "passive") + (uuid "9158f69c-9a15-4931-8b93-4d1366aea86c") + ) + (pad "2" thru_hole circle + (at 16.5 0) + (size 1.35 1.35) + (drill 0.9) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 18 "Net-(SGNL_B1-Pin_1)") + (pintype "passive") + (uuid "a3912331-601a-47cb-ac46-8d8144f6a5d9") + ) + (embedded_fonts no) + (model "RGP0207CHK1G0.stp" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "R1Go:RESAD1650W70L650D250" + (layer "F.Cu") + (uuid "511ee32a-67bc-40fe-a005-09ae35c9667b") + (at 74.01 82.5) + (descr "RGP0207CHK1G0") + (tags "Resistor") + (property "Reference" "R10" + (at 0.63 2.54 0) + (layer "F.SilkS") + (uuid "c5c81eb8-6711-43b2-acad-eaf5c7b879c4") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Value" "1G" + (at 0 0 0) + (layer "F.SilkS") + (hide yes) + (uuid "f086b580-57d9-468f-aec6-1963fefd2be1") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "e8cdc9f7-eb39-4e7f-ae8b-6a218d1fcfba") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Resistor" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "384838fb-6b63-46b7-8d2c-5521db75255c") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/a3724ff5-8cb6-46d0-b421-63da8a253dc7") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 1.025 0) + (end 5 0) + (stroke + (width 0.2) + (type solid) + ) + (layer "F.SilkS") + (uuid "7974632e-a7fd-4dc4-9022-ae21568dfdab") + ) + (fp_line + (start 5 -1.25) + (end 11.5 -1.25) + (stroke + (width 0.2) + (type solid) + ) + (layer "F.SilkS") + (uuid "a44bb3d9-77ad-4599-8e80-ffc9ced10332") + ) + (fp_line + (start 5 1.25) + (end 5 -1.25) + (stroke + (width 0.2) + (type solid) + ) + (layer "F.SilkS") + (uuid "32b03cd3-00fb-43a8-855c-2e5ad844592a") + ) + (fp_line + (start 11.5 -1.25) + (end 11.5 1.25) + (stroke + (width 0.2) + (type solid) + ) + (layer "F.SilkS") + (uuid "a6c1952d-ad17-424d-a8c5-4df6ea8c9b9b") + ) + (fp_line + (start 11.5 0) + (end 15.475 0) + (stroke + (width 0.2) + (type solid) + ) + (layer "F.SilkS") + (uuid "82205807-5925-4f22-96ef-e7caca865b65") + ) + (fp_line + (start 11.5 1.25) + (end 5 1.25) + (stroke + (width 0.2) + (type solid) + ) + (layer "F.SilkS") + (uuid "86954dfc-743d-4881-bd42-406c34e21c4f") + ) + (fp_line + (start -0.925 -1.6) + (end 17.425 -1.6) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "d3fd7d17-fe9e-4786-956c-d9870573d16c") + ) + (fp_line + (start -0.925 1.6) + (end -0.925 -1.6) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "37224075-86d9-47bc-bb9e-f92cfa8ef84d") + ) + (fp_line + (start 17.425 -1.6) + (end 17.425 1.6) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "24c753d4-741a-4583-bd3a-0ee3208172f5") + ) + (fp_line + (start 17.425 1.6) + (end -0.925 1.6) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "29087955-a82b-41e7-995f-f2a0581adb29") + ) + (fp_line + (start 0 0) + (end 5 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "2b4d77e4-d8a8-4c5e-8348-2e3891df195a") + ) + (fp_line + (start 5 -1.25) + (end 11.5 -1.25) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "480e923f-3c25-45d7-944a-0b387355e824") + ) + (fp_line + (start 5 1.25) + (end 5 -1.25) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "6c18156c-8a98-4a5a-ab8f-771fbaa32118") + ) + (fp_line + (start 11.5 -1.25) + (end 11.5 1.25) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "bdfcedcd-4d2c-40b2-a92d-35551a10a6af") + ) + (fp_line + (start 11.5 0) + (end 16.5 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "e5ce0a63-afee-4f28-94fd-12186d2e3684") + ) + (fp_line + (start 11.5 1.25) + (end 5 1.25) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "f87dc0cb-5eeb-4b58-94b8-3792883479d8") + ) + (fp_text user "${REFERENCE}" + (at 0.63 2.54 0) + (layer "F.Fab") + (uuid "ed575cdb-9053-46a4-9d34-fada42a46b08") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (pad "1" thru_hole circle + (at 0 0) + (size 1.35 1.35) + (drill 0.9) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 7 "Net-(C5-Pad1)") + (pintype "passive") + (uuid "5a6c052a-d6ea-460b-984d-29426d71e7ea") + ) + (pad "2" thru_hole circle + (at 16.5 0) + (size 1.35 1.35) + (drill 0.9) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 16 "Net-(SGNL_A1-Pin_1)") + (pintype "passive") + (uuid "1fecd301-41d2-4f17-8241-372746319e52") + ) + (embedded_fonts no) + (model "RGP0207CHK1G0.stp" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "C47u63v:CAPPRD350W65D800H1250" + (layer "F.Cu") + (uuid "57f1cd55-3f2c-438f-b4c2-4f5d150ecffc") + (at 77.18 135.84) + (descr "EEU-EB1J470SJ-1") + (tags "Capacitor Polarised") + (property "Reference" "C4" + (at 1.91582 2.097292 0) + (layer "F.SilkS") + (uuid "82096ada-3ded-44cf-bd75-8959c327a174") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Value" "47uF 63v" + (at 0 0 0) + (layer "F.SilkS") + (hide yes) + (uuid "5ad46f85-f25b-4bd1-82ed-795913f1666d") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "01259666-2de3-45de-9934-4bc5af33e538") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Polarized capacitor" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "19240d3e-b7f9-4ae4-9f9d-018cd3fbc5dd") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/225d2ae8-3230-4005-a4b4-2094ff960f52") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_circle + (center 1.75 0) + (end 1.75 4) + (stroke + (width 0.2) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "d4102372-978f-42a1-a90d-41d236206e20") + ) + (fp_circle + (center 1.75 0) + (end 1.75 4) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "7787f7ca-8876-47c6-bb05-6c14aebedc41") + ) + (pad "1" thru_hole rect + (at 0 0) + (size 1.275 1.275) + (drill 0.85) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 5 "Net-(C4-Pad1)") + (pintype "passive") + (uuid "a6779f9f-6a23-40bc-961e-0b8261bdce78") + ) + (pad "2" thru_hole circle + (at 3.5 0) + (size 1.275 1.275) + (drill 0.85) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 6 "Net-(C4-Pad2)") + (pintype "passive") + (uuid "7f2ab19a-976a-456a-8fad-601874d85423") + ) + (embedded_fonts no) + (model "EEU-EB1J470SJ.stp" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Library:conn_holepad" + (layer "F.Cu") + (uuid "5e40555e-2a89-4573-9a30-23f8a46b86ad") + (at 61.94 156.16) + (property "Reference" "X3B1" + (at 0.016458 2.494589 0) + (unlocked yes) + (layer "F.SilkS") + (uuid "30a5f286-250d-4a3c-9f3a-4f3ed4a1e0fa") + (effects + (font + (size 1 1) + (thickness 0.1) + ) + ) + ) + (property "Value" "Conn_01x01_Pin" + (at 0 1 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "b6432240-0ae5-4008-b659-2d7da56c7894") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "f4b1bbf4-7453-4efc-9ae2-791c6dd65202") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Generic connector, single row, 01x01, script generated" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "18d200ec-8a1b-4f8a-b6dd-97c2395b3c52") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/cb6e0e92-8106-4918-9d8c-3e3013d6e7e1") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_text user "${REFERENCE}" + (at 0 2.5 0) + (unlocked yes) + (layer "F.Fab") + (uuid "99f21f5f-21c1-4ef8-a0c8-a5a1b720aba9") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" thru_hole circle + (at 0 0) + (size 3 3) + (drill 1.5) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 22 "Net-(X3B1-Pin_1)") + (pinfunction "Pin_1") + (pintype "passive") + (uuid "abdbdf51-9f1a-417f-a17c-6991518f0831") + ) + (embedded_fonts no) + ) + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "6a95d45f-4519-4910-bd01-b4336f829f93") + (at 61.94 128.22 -90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "R12" + (at 2.915049 -2.449104 180) + (layer "F.SilkS") + (uuid "95885942-92e5-4336-add5-a2ba35600eff") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "47" + (at 1.27 1.92 270) + (layer "F.Fab") + (hide yes) + (uuid "7556e769-713c-42b0-8e52-81caf6b8a4ed") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "e8591d5e-9b96-42c9-bef5-d7dfb39311b6") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Resistor" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "18f93c2b-5214-4bc0-83bb-dac192af2e41") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/9a83ce8c-c4ea-4707-8978-a44f631e4fc0") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "88f7a153-3c40-4d8d-8e04-42edb8032c01") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "ad112007-8408-4e1d-a96b-c679b440039a") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "ac8679ee-a570-4285-beaf-41b481358ff8") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "f2727568-393a-4706-9c58-a6867848526d") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "4381bf1e-59cb-4e33-8f51-6396028cb0ab") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "cd2728a6-cbf9-4086-93a2-472dd5bec58e") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "814bee79-5ee9-491c-b583-6ba5c17fdf16") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "316744c1-0e96-4874-b09f-28721d28a9c5") + ) + (pad "1" thru_hole circle + (at 0 0 270) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 12 "Net-(C11-Pad1)") + (pintype "passive") + (uuid "cb6ccae2-58ed-4069-aacb-cc35c7c95063") + ) + (pad "2" thru_hole oval + (at 2.54 0 270) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 23 "Net-(X2B1-Pin_1)") + (pintype "passive") + (uuid "b0c91d99-9800-421c-83ad-05b0c7bcde76") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "70727d25-e90e-4f97-a2c4-19ef1c2db17a") + (at 82.26 95.2) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "R8" + (at -0.258837 1.734976 0) + (layer "F.SilkS") + (uuid "3e611c63-801e-46e9-86f7-ddc50e28500a") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "47K" + (at 1.27 1.92 0) + (layer "F.Fab") + (hide yes) + (uuid "8ab7a06b-c99d-4344-948a-c34e639a1293") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "e8c82127-8e15-4cb9-b6a6-9806aed42ecb") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Resistor" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "ff163064-c9d5-4ce0-8649-fa1a92b85da5") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/6bc81894-9db7-4be7-a876-2de954b2e8d4") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "72332f31-d254-4b7d-bb98-67a3ecf53cd0") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "dbb33cd9-018e-4d7b-ae36-e97d83a18f0b") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "5bfa8fa6-e47f-429e-9267-97501f54c005") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "e63217f6-e95c-4d83-9128-5fe2bf0307fe") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "26fd6a13-7c19-4e62-a717-28d9800c7e52") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "59cdf935-d918-4629-9a24-844a65b45ce3") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "75949e46-71ae-42a3-bdbf-6acf6818cd0a") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "d3e61387-093f-4be7-b181-0b4c0a3edeb9") + ) + (pad "1" thru_hole circle + (at 0 0) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 8 "Net-(VCC_A2-Pin_1)") + (pintype "passive") + (uuid "f7a268ac-3442-4517-a027-1ae5bc623840") + ) + (pad "2" thru_hole oval + (at 2.54 0) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 7 "Net-(C5-Pad1)") + (pintype "passive") + (uuid "15440508-6b49-427a-94cd-13d5773a99f4") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "745fa253-fc6b-4da8-b153-6b4fca625b32") + (at 82.26 128.22 -90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "R2" + (at 2.958884 -1.980753 180) + (layer "F.SilkS") + (uuid "a517cc3f-6e9e-4271-a99a-07a6f04e0cdb") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "47" + (at 1.27 1.92 270) + (layer "F.Fab") + (hide yes) + (uuid "2daa1a04-b9c4-46f5-af0b-171fd3490c07") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "5e8f0bcc-2c52-44d7-8292-51a08060c83e") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Resistor" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "152e506d-81a9-407f-bb66-e3f68ca0d258") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/e7bc09ca-c05b-46b5-a6ac-36183d8d76a3") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "c3741035-4127-46ee-b322-d339618cd69f") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "e3823e06-9efd-4f4e-8ee5-47273c5b42e1") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "21cbafd0-bc53-4dab-acba-c038266db131") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "34f5eceb-df9b-434b-a7f0-4b41a05c335c") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "79c9ebfb-7e18-4f6d-8309-5deb5e77e1e2") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "49ffcd0c-9ae3-42bd-a1ea-1e54a66a97fd") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "6d6641b2-49aa-4349-ba42-f60171ef5ef6") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "afa9d047-e99c-4bc6-b3b5-01d5d442aba0") + ) + (pad "1" thru_hole circle + (at 0 0 270) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 5 "Net-(C4-Pad1)") + (pintype "passive") + (uuid "e1b10bd0-8cab-4414-aaf4-14cf087e9d4e") + ) + (pad "2" thru_hole oval + (at 2.54 0 270) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 21 "Net-(X2A1-Pin_1)") + (pintype "passive") + (uuid "e6729b8e-23fe-4d05-9615-7ca7671bf626") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "7472e516-6d6f-42aa-aff0-409e97b9c722") + (at 82.26 115.52 90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "D1" + (at -0.564033 2.014328 0) + (layer "F.SilkS") + (uuid "ffd6cd47-439a-4bbe-9753-dd65d13040da") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "12V" + (at 1.27 1.92 90) + (layer "F.Fab") + (hide yes) + (uuid "752cf63f-5d23-4dc4-817a-a293d9be6234") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 90) + (layer "F.Fab") + (hide yes) + (uuid "f5a3ce67-854c-4f38-921f-c306a3c363eb") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Diode" + (at 0 0 90) + (layer "F.Fab") + (hide yes) + (uuid "8c224d7c-c61e-4caa-b24f-348d9fd0569a") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Sim.Device" "D" + (at 197.78 33.26 0) + (layer "F.Fab") + (hide yes) + (uuid "5a1f9017-d692-42d7-b6d1-b99d6e00667e") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Sim.Pins" "1=K 2=A" + (at 197.78 33.26 0) + (layer "F.Fab") + (hide yes) + (uuid "e594021b-69db-4df1-8358-ac2a00e07d21") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (path "/04786958-d145-4302-af4f-030967ac2a8a") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "0224cf19-064c-494b-82b4-98171a22933e") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "993e43d6-d0ab-428f-85bc-ae5bcf149a49") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "46cac06e-fab6-4272-9732-bfad65d29f81") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "abb9a96d-08a8-46e6-a1f1-b0846347ca6a") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "b1c35bab-a00e-4782-a36b-79e79e988f5d") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "92183174-45ed-4b2a-b139-5ac7bf3b7546") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "2919f9e8-6ec9-4b2a-ba3a-c916e973035b") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "eb481af8-d85c-4ce6-a652-43b00abdcc39") + ) + (pad "1" thru_hole circle + (at 0 0 90) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 1 "Net-(D1-K)") + (pinfunction "K") + (pintype "passive") + (uuid "4588228a-a974-4b52-afde-3bd24b303adf") + ) + (pad "2" thru_hole oval + (at 2.54 0 90) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 3 "GND") + (pinfunction "A") + (pintype "passive") + (uuid "73e20179-02ea-4a65-9a4f-0a706a4c9c9d") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "C.022uF50v:K223K15X7RF5UL2" + (layer "F.Cu") + (uuid "777a2a11-51b6-4ba0-a284-b026e2b2353a") + (at 84.8 90.12 90) + (descr "K223K15X7RF5UL2-1") + (tags "Capacitor") + (property "Reference" "C6" + (at -2.218904 -0.082977 180) + (layer "F.SilkS") + (uuid "a4f65e3a-dbd2-44a3-b1c5-9975be850695") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Value" "0.1uF" + (at 1.25 0 90) + (layer "F.SilkS") + (hide yes) + (uuid "f867c9ac-9208-4dae-b13e-f7a83fbe91a4") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 90) + (layer "F.Fab") + (hide yes) + (uuid "0c8bf523-6517-4708-bff6-f22ab2e9bf66") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Unpolarized capacitor" + (at 0 0 90) + (layer "F.Fab") + (hide yes) + (uuid "16a5054a-691a-40b7-9b81-d4371e0048d4") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/57c290cf-4a3a-4689-a5cc-79dd666271df") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 3.25 -1.3) + (end 3.25 -1) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.SilkS") + (uuid "a475d7c7-8820-4801-af00-0fcbcca38990") + ) + (fp_line + (start -0.75 -1.3) + (end 3.25 -1.3) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.SilkS") + (uuid "d40b2379-d455-462c-a1b7-0a8450946868") + ) + (fp_line + (start -0.75 -1) + (end -0.75 -1.3) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.SilkS") + (uuid "0d4bd84a-5607-45fb-87fb-139520d7a0f1") + ) + (fp_line + (start -0.75 1) + (end -0.75 1.3) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.SilkS") + (uuid "bcbb11f6-f2b2-494c-8850-cf4b4f829176") + ) + (fp_line + (start 3.25 1.3) + (end 3.25 1) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.SilkS") + (uuid "59319f7d-fe92-451d-990d-363cbca24416") + ) + (fp_line + (start -0.75 1.3) + (end 3.25 1.3) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.SilkS") + (uuid "6b001352-3195-4298-baa5-3df16eb94116") + ) + (fp_line + (start 3.75 -1.8) + (end 3.75 1.8) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.CrtYd") + (uuid "c851eff6-5ab5-4129-a309-bbf8c82d7558") + ) + (fp_line + (start -1.25 -1.8) + (end 3.75 -1.8) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.CrtYd") + (uuid "7baec531-e6a6-458b-a317-1988ff17822e") + ) + (fp_line + (start 3.75 1.8) + (end -1.25 1.8) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.CrtYd") + (uuid "86f516d8-4335-491f-b766-a3db1be23d8b") + ) + (fp_line + (start -1.25 1.8) + (end -1.25 -1.8) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.CrtYd") + (uuid "aac5680b-f51b-4db4-b343-1bd513dfea4f") + ) + (fp_line + (start 3.25 -1.3) + (end 3.25 1.3) + (stroke + (width 0.2) + (type solid) + ) + (layer "F.Fab") + (uuid "83838809-c2f3-4cb0-8c78-517af44e787b") + ) + (fp_line + (start -0.75 -1.3) + (end 3.25 -1.3) + (stroke + (width 0.2) + (type solid) + ) + (layer "F.Fab") + (uuid "011e2610-78b5-4cab-96d7-0f99d08a59fa") + ) + (fp_line + (start 3.25 1.3) + (end -0.75 1.3) + (stroke + (width 0.2) + (type solid) + ) + (layer "F.Fab") + (uuid "c1a01b22-728e-46d6-96ef-30e776faf4fa") + ) + (fp_line + (start -0.75 1.3) + (end -0.75 -1.3) + (stroke + (width 0.2) + (type solid) + ) + (layer "F.Fab") + (uuid "db2af17f-2eb4-4f2b-b59e-eb5c8504eb43") + ) + (pad "1" thru_hole circle + (at 0 0 90) + (size 1.2 1.2) + (drill 0.75) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 8 "Net-(VCC_A2-Pin_1)") + (pintype "passive") + (uuid "d2fa98eb-94f3-4395-b54d-d4291f80c27f") + ) + (pad "2" thru_hole circle + (at 2.5 0 90) + (size 1.2 1.2) + (drill 0.75) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 3 "GND") + (pintype "passive") + (uuid "448d6ed4-1c1f-4bea-a65e-151ed27dfe57") + ) + (embedded_fonts no) + (model "K223K15X7RF5UL2.stp" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "MountingHole:MountingHole_2.7mm_M2.5_ISO14580" + (layer "F.Cu") + (uuid "7f03512d-5430-4f6b-989a-c57dddec5941") + (at 86.495 77.591) + (descr "Mounting Hole 2.7mm, no annular, M2.5, ISO14580") + (tags "mounting hole 2.7mm no annular m2.5 iso14580") + (property "Reference" "H2" + (at 0 -3.25 0) + (layer "F.SilkS") + (hide yes) + (uuid "8c84fe77-0de7-4088-a65e-4dddda1e9add") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "M2.5" + (at 0 3.25 0) + (layer "F.Fab") + (hide yes) + (uuid "8fc6e3fc-39d3-4a90-920b-1879c4c60efe") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "e9396dda-cbac-45a2-9dcb-cd09675e02f1") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Mounting Hole without connection" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "9e9f731d-18dc-475f-abe2-9857ca1d4272") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (sheetfile "StudioMic.kicad_sch") + (attr exclude_from_pos_files) + (fp_circle + (center 0 0) + (end 2.25 0) + (stroke + (width 0.15) + (type solid) + ) + (fill no) + (layer "Cmts.User") + (uuid "3d8ade6d-3490-4a27-8a42-8c4f9b2b216b") + ) + (fp_circle + (center 0 0) + (end 2.5 0) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + (uuid "d740fdd3-3381-4e68-abba-3550b800a4b9") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (uuid "88414f96-11bc-4b42-a55b-9c68a12fe7d3") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "" np_thru_hole oval + (at 0 0) + (size 3.5 2.7) + (drill oval 3.5 2.7) + (layers "*.Cu" "*.Mask") + (uuid "d10210f0-ec59-438e-a0e2-3e35204b58ab") + ) + (embedded_fonts no) + ) + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "8222916a-afda-4ca0-9014-a8d49bfd5eca") + (at 77.18 102.82) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "R9" + (at -0.269833 1.725355 0) + (layer "F.SilkS") + (uuid "fe03fcd1-3a46-4641-b4a4-6271a9c4a05c") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "2.2K" + (at 1.27 1.92 0) + (layer "F.Fab") + (hide yes) + (uuid "3d136940-b473-4bb7-b7fc-a37a3d1f627d") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "df917154-3873-4794-b7fb-d489d0b60eae") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Resistor" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "af81fb55-e4a7-42b9-9cd8-38d437659e87") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/333c6bef-4cf7-4319-b480-a4d554049f1a") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "90ef6fdf-2801-46ca-ad22-7ac678cd6738") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "8c0e6bf2-9834-4387-9f20-62f75692ddea") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "5349220a-ce3f-4604-835f-2e97f62acc5d") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "ba228c7b-fd34-408a-8a2b-4a1c916b760e") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "ae8ab25a-71ea-40a8-a5f6-02d2dd7f0a61") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "63f24955-dcd9-4332-a2a3-07f1e5914fcf") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "d8c4b57b-464b-4294-82a2-41d2f3cd66d9") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "cc1ebe5c-f4c9-4b70-83eb-e60fb874dc79") + ) + (pad "1" thru_hole circle + (at 0 0) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 6 "Net-(C4-Pad2)") + (pintype "passive") + (uuid "c150de42-16be-4fdc-853c-5f7149aceb59") + ) + (pad "2" thru_hole oval + (at 2.54 0) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 17 "Net-(IC1-Pad6)") + (pintype "passive") + (uuid "a513bcd0-e8d2-493e-889c-f7069e4a27f5") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "87039480-541e-4ba1-8b4c-becebf7d9ca0") + (at 56.86 115.52 90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "D2" + (at -0.591079 1.95189 0) + (layer "F.SilkS") + (uuid "1235d70f-2098-481f-ab42-9da8c8985f0e") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "12V" + (at 1.27 1.92 90) + (layer "F.Fab") + (hide yes) + (uuid "dc161806-2a08-47ac-aa0b-6d28839e8d72") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 90) + (layer "F.Fab") + (hide yes) + (uuid "5a210988-93f9-4e47-8b69-04e306120415") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Diode" + (at 0 0 90) + (layer "F.Fab") + (hide yes) + (uuid "1adbc3ef-302f-4a7a-952f-3d03ceedbca8") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Sim.Device" "D" + (at 172.38 58.66 0) + (layer "F.Fab") + (hide yes) + (uuid "cfda58be-341a-4bbc-9e10-9584ddd01fcc") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Sim.Pins" "1=K 2=A" + (at 172.38 58.66 0) + (layer "F.Fab") + (hide yes) + (uuid "8711ddee-ed0c-4807-8d13-7166e9b55ab1") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (path "/60bb60f7-d540-494b-9a5e-5a737fa70d44") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "0a57cbbb-36e7-49f4-8388-e321f682968c") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "b8e79ce5-adc7-42e7-8264-18dfda5ab300") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "206ed511-f19b-4e42-8589-0130ee9ff6b3") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "b8e6d07c-596c-44ef-9bed-c266491f9a4b") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "2635a543-dd70-4118-892f-2536c0e2a23a") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "5d3b86c5-23ed-4f8d-b4f9-2f0a6f2b5371") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "8a9fb8a9-f82e-421c-9a3d-efda6114a0d6") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "c5aa4b15-3a49-4e48-aa4b-93fb9434694b") + ) + (pad "1" thru_hole circle + (at 0 0 90) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 9 "Net-(D2-K)") + (pinfunction "K") + (pintype "passive") + (uuid "43fb71e1-af97-4bb0-bbba-19e9c758b00f") + ) + (pad "2" thru_hole oval + (at 2.54 0 90) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 3 "GND") + (pinfunction "A") + (pintype "passive") + (uuid "e0afb2aa-fd20-4f27-aa21-405c17a841ad") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "88eee050-1f6e-4b7d-956e-b68a6d184d3d") + (at 61.94 105.36 -90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "R15" + (at 2.975622 -2.430451 0) + (layer "F.SilkS") + (uuid "e84e0394-33f4-4f73-bb5a-3c497fb44bba") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "200" + (at 1.27 1.92 90) + (layer "F.Fab") + (hide yes) + (uuid "cc50b4db-f9a4-47e4-9c5a-de4f6b9b372e") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "03ac3ef3-da9b-45af-8fb8-9c48828dca77") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Resistor" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "836905f3-1854-401d-9f9a-05dc336f0f1c") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/ecfd7613-45e7-4949-88b5-f33fd1e3a59e") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "d7889851-719a-4f0e-a5ef-37303f437a10") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "cb9c4244-3998-44f5-b623-2c6a639f9c67") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "363dfcd3-2abe-44cd-a8ae-47046bff7491") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "04dcb482-be1c-4aef-81c7-82e050eceb6f") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "bded68ca-02e0-4891-bc91-9a7efd46d714") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "7ca39ae6-a869-4917-9211-de348471e2e5") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "f9930ee4-73dc-47c3-a61b-6e6ee1265373") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "2f2d545f-1858-4dd5-a4ee-e52d44c257b0") + ) + (pad "1" thru_hole circle + (at 0 0 270) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 15 "Net-(VCC_B2-Pin_1)") + (pintype "passive") + (uuid "c7011c0b-56aa-440b-9bd4-feaddb54374d") + ) + (pad "2" thru_hole oval + (at 2.54 0 270) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 9 "Net-(D2-K)") + (pintype "passive") + (uuid "c6ab1031-4d70-424e-9213-8ef3496d68ff") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "930fb205-d5cd-48f9-a781-9004a9399450") + (at 61.94 115.52 90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "C8" + (at -0.613463 1.997704 0) + (layer "F.SilkS") + (uuid "40966c82-ce75-4b79-8949-185ad92092bb") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "0.1uF" + (at 1.27 1.92 90) + (layer "F.Fab") + (hide yes) + (uuid "d5a5f12a-7151-4e16-9321-d859c322c039") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 90) + (layer "F.Fab") + (hide yes) + (uuid "46b6d6ce-adee-4dfe-aab1-e4d9ce05a5b6") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Unpolarized capacitor" + (at 0 0 90) + (layer "F.Fab") + (hide yes) + (uuid "c1cfc99b-eb8e-4b7e-afb0-9da993eaf499") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/0074ef94-0d36-4108-8f14-b1d064783f91") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "0d325ce5-9686-46e1-9710-553c86fad016") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "232f966d-1a71-4f43-a9cc-c02258ab6ef5") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "6b6605b9-1d95-4609-af46-2b13c6043844") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "e325372f-b4a1-4c37-a40d-a7deb804eba1") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "99d0fa06-d55e-4736-a715-055daa0c5d70") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "f2c5b4b1-2c5c-4bdb-96b1-5b4a00bf5ecf") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "417cc6a6-89c8-4f98-853c-cdcde77c0d4c") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "246f1a83-7735-4299-904e-687af4cc2121") + ) + (pad "1" thru_hole circle + (at 0 0 90) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 9 "Net-(D2-K)") + (pintype "passive") + (uuid "04c2d50b-f84b-4b00-9c08-d75289fd0c43") + ) + (pad "2" thru_hole oval + (at 2.54 0 90) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 3 "GND") + (pintype "passive") + (uuid "229161d5-9ab3-4020-8df7-6107acbc7bac") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "959d4b1a-fc40-4583-b414-2275fb79e479") + (at 82.26 105.36 -90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "R5" + (at 2.956969 -2.014328 180) + (layer "F.SilkS") + (uuid "e24cc170-5302-456e-aeca-910cb0640507") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "200" + (at 1.27 1.92 270) + (layer "F.Fab") + (hide yes) + (uuid "e8289d04-0393-4a67-9ddf-3a5c9d0fa599") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "73a25dfa-9c11-4c4a-ab5c-a9628fcee152") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Resistor" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "9e8bcd89-5f4d-4cbe-b4d1-ceed3cbd2ec7") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/7f13f25b-68e1-44e1-992e-6e69c71b1400") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "d3f7b3a8-d135-401e-8064-8ad0069d43c9") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "81fe116a-52c3-429f-9aed-1586910c406e") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "89181fdb-23b4-4ea1-b31e-b0eff898a7d0") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "bf57fa49-14f5-41f9-9acd-09d4d23a11da") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "3b904076-a20d-4b59-ae30-4e3c5d8e3f16") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "e1f22170-d15b-4801-ac28-f748ddf101ed") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "a193c140-1c13-4217-92f5-4ffc95ed767a") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "6f5ffd86-4625-4173-8d26-1174d5496705") + ) + (pad "1" thru_hole circle + (at 0 0 270) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 8 "Net-(VCC_A2-Pin_1)") + (pintype "passive") + (uuid "e8c3d387-00c8-4398-a83a-9365ebf93a43") + ) + (pad "2" thru_hole oval + (at 2.54 0 270) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 1 "Net-(D1-K)") + (pintype "passive") + (uuid "58b5a7c0-9f6e-4e46-85bc-5db95e418a01") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Library:conn_holepad" + (layer "F.Cu") + (uuid "95f3cf11-5e3e-4f4f-ad36-1e7c81240b7f") + (at 82.26 156.16) + (property "Reference" "X3A1" + (at -0.039043 2.524434 0) + (unlocked yes) + (layer "F.SilkS") + (uuid "ca690d1f-83c1-45bb-babc-efa06be639dc") + (effects + (font + (size 1 1) + (thickness 0.1) + ) + ) + ) + (property "Value" "Conn_01x01_Pin" + (at 0 1 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "42ce4a1a-b352-4d63-86f8-1877213d9cb7") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "2860c4ad-7bbf-4ff9-b499-7188f39d7670") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Generic connector, single row, 01x01, script generated" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "7cb13238-aa71-424c-b9d4-b3de9d8ff902") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/caa6c8b8-ee7b-44c3-a728-7e55c5ac92d4") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_text user "${REFERENCE}" + (at 0 2.5 0) + (unlocked yes) + (layer "F.Fab") + (uuid "7931f949-744c-4070-b5b9-9141b8124a2d") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" thru_hole circle + (at 0 0) + (size 3 3) + (drill 1.5) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 20 "Net-(X3A1-Pin_1)") + (pinfunction "Pin_1") + (pintype "passive") + (uuid "1096f159-2fd7-4d0f-8c49-5e8e92f1ac73") + ) + (embedded_fonts no) + ) + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "96edd9a0-1961-43b7-abec-2fcd9dc521f8") + (at 59.4 95.2) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "R18" + (at 0.212099 1.734976 0) + (layer "F.SilkS") + (uuid "7d01e317-e30d-4099-9024-f03be67c49ad") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "47K" + (at 1.27 1.92 0) + (layer "F.Fab") + (hide yes) + (uuid "ba3fee32-5607-4e2d-8c80-bfa3f4f0643f") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "9981c7fd-7812-4525-9805-d31044250e64") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Resistor" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "ca20e36f-fd0c-4c07-b61b-b02c62bb7c45") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/dffbb023-66a6-4908-bab6-7170bcf5a1bb") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "941cde38-2805-4446-8659-7045ce2defdd") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "96c32c3a-b018-4d93-b5ef-63127a8581b0") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "a9870692-2cf2-4816-a3ce-64f6e44ef8b0") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "96852ad8-6479-4d59-bfd7-b9e66893bda7") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "cd907c6f-df83-4fdd-81e6-e955798d3470") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "a04fad82-1cc8-49f3-896a-f04b357b4557") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "3734aed0-0cae-4a81-b5c7-2adecc43f460") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "0b6fa5b7-9028-41fe-b3b1-d74fb8700b63") + ) + (pad "1" thru_hole circle + (at 0 0) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 15 "Net-(VCC_B2-Pin_1)") + (pintype "passive") + (uuid "1ba822b9-917a-43c2-b3f6-8db9cb7ec407") + ) + (pad "2" thru_hole oval + (at 2.54 0) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 14 "Net-(C12-Pad1)") + (pintype "passive") + (uuid "26895040-bb44-4da7-8f1e-68bb588e3ee6") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "C47u35v:CAPPRD200W50D525H1250" + (layer "F.Cu") + (uuid "99197f4c-2fe4-4089-b0fa-e89e30d9edc8") + (at 77.18 118.06 -90) + (descr "5*11") + (tags "Capacitor Polarised") + (property "Reference" "C7" + (at 4.844928 -0.6182 0) + (layer "F.SilkS") + (uuid "86e5d921-e8e0-493b-83a4-fb49f4fa5c56") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Value" "47uF 35v" + (at 0 0 90) + (layer "F.SilkS") + (hide yes) + (uuid "f2ac2ce7-3672-4776-87b3-bc13e8c293dc") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "d2fb2d67-0617-43c5-982d-bbdd386c3194") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Polarized capacitor" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "ebb75ed9-bc0f-4138-af58-93e429173144") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/e99cf364-578f-476c-924e-844a1b1a8e85") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_circle + (center 1 0) + (end 1 2.625) + (stroke + (width 0.2) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "f17d0654-baf1-43be-a44a-a8e29655dd2b") + ) + (fp_circle + (center 1 0) + (end 1 2.625) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "08ee4e0f-41a8-4ecd-aed7-39440055cbe5") + ) + (pad "1" thru_hole rect + (at 0 0 270) + (size 1.1 1.1) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 8 "Net-(VCC_A2-Pin_1)") + (pintype "passive") + (uuid "465c2404-a3dd-4ed4-8c70-900027804e71") + ) + (pad "2" thru_hole circle + (at 2 0 270) + (size 1.1 1.1) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 3 "GND") + (pintype "passive") + (uuid "06f032a5-26c0-4697-afaf-b621b86d80b4") + ) + (embedded_fonts no) + (model "UVZ1V470MDD1TA.stp" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "99c3b2dd-1fe3-41c8-bfa0-f729178fe195") + (at 89.88 90.12 90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "R7" + (at -1.860768 -0.044624 0) + (layer "F.SilkS") + (uuid "692d2aa6-91ed-4927-ac36-d095b976a9dc") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "47K" + (at 1.27 1.92 90) + (layer "F.Fab") + (hide yes) + (uuid "188217de-9e22-4812-8857-52b8ed838eee") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 90) + (layer "F.Fab") + (hide yes) + (uuid "12bc9038-f77b-402c-801c-470512c30ab9") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Resistor" + (at 0 0 90) + (layer "F.Fab") + (hide yes) + (uuid "40921298-6c18-4b74-a495-a820904530c5") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/9073f975-3395-426e-a26b-e4f39deda04a") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "391657fd-92d7-4fd2-bccb-6a03875eac4c") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "1db74212-d692-4e1b-b4bd-a658f524ed32") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "d7e27410-0677-4c4e-b058-367e26c8bebe") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "35067d5e-e5a4-4f8d-a6b6-33b2cfd3edb8") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "cae7b1d2-616f-45cf-b639-87ad890f8e8e") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "5e460e4e-a63e-4f00-a6a7-0661ca99b1a6") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "85d6eb9b-579b-45bd-9e49-b940e2b36e87") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "8aa682a4-9a8b-419a-a646-de3fc0367b4c") + ) + (pad "1" thru_hole circle + (at 0 0 90) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 7 "Net-(C5-Pad1)") + (pintype "passive") + (uuid "c51d383a-b53a-4671-8a0c-96d419655fd4") + ) + (pad "2" thru_hole oval + (at 2.54 0 90) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 3 "GND") + (pintype "passive") + (uuid "eb5a2e53-20bc-4282-b37c-0fa2d2fb1534") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Library:conn_holepad" + (layer "F.Cu") + (uuid "9e7b1d91-5ecd-4ac9-8f97-6818989902ee") + (at 67.02 156.16) + (property "Reference" "X2B1" + (at -0.004879 2.494589 0) + (unlocked yes) + (layer "F.SilkS") + (uuid "43813caf-7586-4993-b65c-5ab1960aca2c") + (effects + (font + (size 1 1) + (thickness 0.1) + ) + ) + ) + (property "Value" "Conn_01x01_Pin" + (at 0 1 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "bdf7e597-4a99-404c-bf92-6b07911c38c9") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "0ba49c4a-bdca-47ed-bde9-7d588a5c68c6") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Generic connector, single row, 01x01, script generated" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "7f1d7575-40d3-41b7-8927-15e56e129a1a") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/9e00ee5d-3600-4941-9f50-ffa5b59f36da") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_text user "${REFERENCE}" + (at 0 2.5 0) + (unlocked yes) + (layer "F.Fab") + (uuid "846c5826-b5a8-4975-b14a-5205a1815a08") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" thru_hole circle + (at 0 0) + (size 3 3) + (drill 1.5) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 23 "Net-(X2B1-Pin_1)") + (pinfunction "Pin_1") + (pintype "passive") + (uuid "d41ca2f8-9791-46f7-80af-83983bcb8fe6") + ) + (embedded_fonts no) + ) + (footprint "Library:conn_holepad" + (layer "F.Cu") + (uuid "a4df7562-a290-407a-ab81-43fab86b5a61") + (at 77.18 69.8) + (property "Reference" "SGNL_A1" + (at 0 -0.5 0) + (unlocked yes) + (layer "F.SilkS") + (hide yes) + (uuid "2bc4b8e1-d431-481c-bc25-7df681101c5e") + (effects + (font + (size 1 1) + (thickness 0.1) + ) + ) + ) + (property "Value" "Conn_01x01_Pin" + (at 0 1 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "3081efc6-5f2e-45d5-9bb2-c009835491ec") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "be9a9e0d-5d1a-46c8-9221-699d2e0d22dd") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Generic connector, single row, 01x01, script generated" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "59222085-ee46-40fe-8f34-1a3f8e7dd036") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/8a06125c-2a98-42e5-987b-f3b86e05fdf0") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (pad "1" thru_hole circle + (at 0 0) + (size 3 3) + (drill 1.5) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 16 "Net-(SGNL_A1-Pin_1)") + (pinfunction "Pin_1") + (pintype "passive") + (uuid "cf71c2cc-ae6c-46bd-97e1-d41546650fe7") + ) + (embedded_fonts no) + ) + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "aa6efbc5-6ba3-459f-9580-cd462fcda12c") + (at 87.34 115.52 90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "C1" + (at -0.586416 2.015375 0) + (layer "F.SilkS") + (uuid "ebbab0e7-98de-41b6-b0cb-c788ec26123c") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "0.1uF" + (at 1.27 1.92 90) + (layer "F.Fab") + (hide yes) + (uuid "5c6adab0-2d60-41b4-bbc3-ac42d5a1c82e") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 90) + (layer "F.Fab") + (hide yes) + (uuid "16b39a61-a7a0-4f25-a7db-287aa554ee86") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Unpolarized capacitor" + (at 0 0 90) + (layer "F.Fab") + (hide yes) + (uuid "9080a5fc-86f9-41e8-8dfb-fb9c54a14e97") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/85f8809e-e152-4de2-87ff-91f95cdc3dd3") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "59a80458-4570-4521-bb70-04a7b47ca69a") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "8c9a20c3-ea9c-4884-96e1-4d56069549b2") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "10f5d38a-7c6e-4919-8d15-c7303ae24b4c") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "600363cc-f599-45b8-82cc-97ad84ada0f3") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "ee3862ec-9f0a-4293-8462-ed9a93b4676e") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "24f025a1-3efa-47c2-a005-47860e3c5ef3") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "5d96c95e-3ef0-4f19-85e8-ed3f64d3b4ed") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "d20545d5-6330-46fa-845d-98299a02fb8c") + ) + (pad "1" thru_hole circle + (at 0 0 90) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 1 "Net-(D1-K)") + (pintype "passive") + (uuid "fafa54b4-7ce4-401c-90ac-82e976008a01") + ) + (pad "2" thru_hole oval + (at 2.54 0 90) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 3 "GND") + (pintype "passive") + (uuid "d7be3e35-e20f-4d53-9cad-865efe817c1c") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Library:conn_holepad" + (layer "F.Cu") + (uuid "ae236a0b-2833-4b1a-b543-6315ef73a5e5") + (at 83.53 69.8) + (property "Reference" "VCC_A2" + (at 0 -0.5 0) + (unlocked yes) + (layer "F.SilkS") + (hide yes) + (uuid "d4a06815-153a-44b7-98be-9be23dd99874") + (effects + (font + (size 1 1) + (thickness 0.1) + ) + ) + ) + (property "Value" "Conn_01x01_Pin" + (at 0 1 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "eca0be31-9f7f-4545-972d-bfb6393a3a66") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "031750d9-3a4f-4ecc-8a39-c91b45ec816c") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Generic connector, single row, 01x01, script generated" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "4975db62-1587-427f-aae3-1156b0b4d15f") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/c623b86b-7f7f-40b9-93e6-26635740e815") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (pad "1" thru_hole circle + (at 0 0) + (size 3 3) + (drill 1.5) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 8 "Net-(VCC_A2-Pin_1)") + (pinfunction "Pin_1") + (pintype "passive") + (uuid "f12ffd00-16b3-4975-83e7-a949d3ea280d") + ) + (embedded_fonts no) + ) + (footprint "Library:conn_holepad" + (layer "F.Cu") + (uuid "b06caee4-0d58-4da3-b2b7-a0187d91e230") + (at 67.02 69.8) + (property "Reference" "SGNL_B1" + (at 0 -0.5 0) + (unlocked yes) + (layer "F.SilkS") + (hide yes) + (uuid "a5870f43-5667-417d-8f22-e824b3f11f3e") + (effects + (font + (size 1 1) + (thickness 0.1) + ) + ) + ) + (property "Value" "Conn_01x01_Pin" + (at 0 1 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "4ea611fb-e0e3-4ce4-8d5f-b6df2c9d67ef") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "78955fe8-8b1e-436b-885f-9da70f4ff973") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Generic connector, single row, 01x01, script generated" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "9649aa6e-c541-4d38-87e8-475e1a11cf47") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/5927db5e-0de5-4020-a1e2-d3c795f23f3a") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (pad "1" thru_hole circle + (at 0 0) + (size 3 3) + (drill 1.5) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 18 "Net-(SGNL_B1-Pin_1)") + (pinfunction "Pin_1") + (pintype "passive") + (uuid "4cd77282-26c4-4a20-b562-8a563709271d") + ) + (embedded_fonts no) + ) + (footprint "C47u63v:CAPPRD350W65D800H1250" + (layer "F.Cu") + (uuid "b5075aca-42d2-4f70-96dd-3872779dc083") + (at 63.52 146) + (descr "EEU-EB1J470SJ-1") + (tags "Capacitor Polarised") + (property "Reference" "C10" + (at 1.709261 2.043428 0) + (layer "F.SilkS") + (uuid "04109b5d-8e3d-466d-af92-2d3e23461013") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Value" "47uF 63v" + (at 0 0 0) + (layer "F.SilkS") + (hide yes) + (uuid "cf894c60-e36b-4996-9148-04c44f8822b4") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "bb691852-a8d1-431e-886a-89de0adc7535") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Polarized capacitor" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "239618a7-6821-4575-a2ee-393ff4ed0ec2") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/90b176ff-c759-4172-98d6-a482a71dc515") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_circle + (center 1.75 0) + (end 1.75 4) + (stroke + (width 0.2) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "e5dc9451-87d8-41cb-9aba-07dd9c72d792") + ) + (fp_circle + (center 1.75 0) + (end 1.75 4) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "727123a4-062b-4900-9e6f-743331ddb861") + ) + (fp_text user "${REFERENCE}" + (at 1.709261 2.043428 0) + (layer "F.Fab") + (uuid "aacf7dd8-53bc-4669-8fd0-d2c10ee3c884") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (pad "1" thru_hole rect + (at 0 0) + (size 1.275 1.275) + (drill 0.85) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 10 "Net-(C10-Pad1)") + (pintype "passive") + (uuid "72fa0ea7-e1ff-4997-8dd4-3dda2339d826") + ) + (pad "2" thru_hole circle + (at 3.5 0) + (size 1.275 1.275) + (drill 0.85) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 11 "Net-(C10-Pad2)") + (pintype "passive") + (uuid "c3a63387-05f2-48bc-8b7e-af16fd833770") + ) + (embedded_fonts no) + (model "EEU-EB1J470SJ.stp" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "b84e8712-6efc-465e-95e6-3ac45935569c") + (at 87.34 120.6 -90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "R3" + (at 2.957313 -1.970608 180) + (layer "F.SilkS") + (uuid "93ac7d19-d67c-45b8-a018-e66d0d693255") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "2.2K" + (at 1.27 1.92 270) + (layer "F.Fab") + (hide yes) + (uuid "c002e533-0fea-41b3-ad7a-366d7df81023") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "c179dc51-8c1b-411a-a9fb-a3c9b6285f69") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Resistor" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "9a3e861b-d2fd-4cdd-9101-acdecf7dc060") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/f8426791-547e-42ff-b8e0-5863e33d65fa") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "fabcbd8c-7383-4f28-b114-7b72a06c9db4") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "91cb5219-3d6f-470e-bbb3-a67f1896486d") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "82035587-db50-41ac-99bf-46552f523b4f") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "245990a2-da54-4dac-b95f-bffa48f885c6") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "d0168173-bd98-4fe2-a2f9-108ce9cd7313") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "10563e31-80d1-400a-80f8-400fa4a9908e") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "0b2c0b3b-30d1-4291-9664-2a73420c5026") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "50214740-bcbb-4169-96dc-e5e729a9abc9") + ) + (pad "1" thru_hole circle + (at 0 0 270) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 1 "Net-(D1-K)") + (pintype "passive") + (uuid "cedec1a4-41e2-4f7c-ab31-82d215a27498") + ) + (pad "2" thru_hole oval + (at 2.54 0 270) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 2 "Net-(C3-Pad1)") + (pintype "passive") + (uuid "afff5184-659d-42f6-bb50-57f31b58f697") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "bcd770fa-1ed0-48b0-8cbb-2f87dc5541a4") + (at 56.86 128.22 -90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "R11" + (at 2.989661 -2.425673 180) + (layer "F.SilkS") + (uuid "9a4fa8ac-f6aa-4b1e-a05d-52c099ecae4f") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "47" + (at 1.27 1.92 270) + (layer "F.Fab") + (hide yes) + (uuid "962b8959-cd71-424d-9398-040fad19f045") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "281af48f-5c73-453b-9d26-8571ab25ebd1") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Resistor" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "f9a239ad-a0bf-4260-b92e-9b01d9bc0dde") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/4281c715-bfa5-4c1d-833f-007ae19a4629") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "0f00f251-48ff-4520-818f-2835947dbbb5") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "1f82be44-c34c-45c4-a30e-d1d9d366e1e8") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "817873f0-a5c6-4482-916c-b8bce3351ef6") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "be36d02b-41c4-493a-9114-68008531c09c") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "c004e9fc-9e95-467f-b958-961ff4734bc8") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "ded4a380-55a3-4c46-9dee-d6b001bdd121") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "cf4a0f84-049d-482e-bfa5-0f57f4c43070") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "f98b31ee-14a8-4d0a-abaa-9b47340b48fc") + ) + (pad "1" thru_hole circle + (at 0 0 270) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 10 "Net-(C10-Pad1)") + (pintype "passive") + (uuid "15d39eaf-4060-4dfa-b0c8-a68e2a2c5e4f") + ) + (pad "2" thru_hole oval + (at 2.54 0 270) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 22 "Net-(X3B1-Pin_1)") + (pintype "passive") + (uuid "0ab0880e-3789-4e75-baf6-f6b9fa2c8ffa") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Library:conn_holepad" + (layer "F.Cu") + (uuid "c262cae7-d9e8-4f1f-a599-ab4800cab255") + (at 54.32 69.8) + (property "Reference" "GND_B1" + (at 0 -0.5 0) + (unlocked yes) + (layer "F.SilkS") + (hide yes) + (uuid "94ee880b-62c4-4690-b8db-c8deb2a802c1") + (effects + (font + (size 1 1) + (thickness 0.1) + ) + ) + ) + (property "Value" "Conn_01x01_Pin" + (at 0 1 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "d231f684-55fa-4bd0-89a8-90307185cb75") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "1a8657a6-9f7a-4c1d-893f-a13beaad7a72") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Generic connector, single row, 01x01, script generated" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "5657a3a8-4c63-477b-b008-9ea1533ac316") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/989fc3e9-94aa-4ae0-8fd0-530b54bc7c6a") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (pad "1" thru_hole circle + (at 0 0) + (size 3 3) + (drill 1.5) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 3 "GND") + (pinfunction "Pin_1") + (pintype "passive") + (uuid "f252adea-92a7-4e02-b375-5662a1008766") + ) + (embedded_fonts no) + ) + (footprint "C47u35v:CAPPRD200W50D525H1250" + (layer "F.Cu") + (uuid "c6f7ad19-b3e5-4c35-be9c-f49f41b71b9c") + (at 75.18 110.44) + (descr "5*11") + (tags "Capacitor Polarised") + (property "Reference" "C5" + (at 1.185658 3.822112 0) + (layer "F.SilkS") + (uuid "24d7d41c-a663-47c1-8766-fb44e232409e") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Value" "47uF 35v" + (at 0 0 0) + (layer "F.SilkS") + (hide yes) + (uuid "b4f9aa59-0764-4eae-8c6d-9997b8fa7f0c") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "de9118d6-a036-45ec-bb52-022719991bde") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Polarized capacitor" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "7982e65d-e2ca-4d6d-879d-09fecee0785c") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/4b15cc8f-884d-43ed-8a34-09c6b829c7ae") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_circle + (center 1 0) + (end 1 2.625) + (stroke + (width 0.2) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "40116a95-4088-4a06-9824-3e994e651ff3") + ) + (fp_circle + (center 1 0) + (end 1 2.625) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "181d21fe-9b9e-4efc-9745-dea381a54c65") + ) + (pad "1" thru_hole rect + (at 0 0) + (size 1.1 1.1) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 7 "Net-(C5-Pad1)") + (pintype "passive") + (uuid "e476c53c-8951-41ac-bbc2-278126285c9f") + ) + (pad "2" thru_hole circle + (at 2 0) + (size 1.1 1.1) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 3 "GND") + (pintype "passive") + (uuid "8a97c5c8-fa77-4792-bcb6-843f0102dd8e") + ) + (embedded_fonts no) + (model "UVZ1V470MDD1TA.stp" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "C47u35v:CAPPRD200W50D525H1250" + (layer "F.Cu") + (uuid "c8cfe034-72d1-41a5-9f6c-2a8b58c4cd4e") + (at 77.18 125.68 -90) + (descr "5*11") + (tags "Capacitor Polarised") + (property "Reference" "C2" + (at 4.880074 -0.6182 0) + (layer "F.SilkS") + (uuid "82a06bbe-6f85-4009-a909-b329e94c0fb2") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Value" "47uF 35v" + (at 0 0 90) + (layer "F.SilkS") + (hide yes) + (uuid "60c1f95e-29ae-4968-820b-c216c26f2b5c") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "3d41cf57-5a79-46d6-ba3d-61d385e81808") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Polarized capacitor" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "b6c8f9c7-fbe3-4868-bdff-3cd7192bda6d") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/4af43834-c924-4e65-939c-9334e1de4766") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_circle + (center 1 0) + (end 1 2.625) + (stroke + (width 0.2) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "a013cb76-2687-462b-b75e-1d91f94c1fe4") + ) + (fp_circle + (center 1 0) + (end 1 2.625) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "077d1680-f903-4e77-9d5a-52100de2801a") + ) + (pad "1" thru_hole rect + (at 0 0 270) + (size 1.1 1.1) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 1 "Net-(D1-K)") + (pintype "passive") + (uuid "1ea38779-7b99-4e3c-b48d-39ba0b2f0dab") + ) + (pad "2" thru_hole circle + (at 2 0 270) + (size 1.1 1.1) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 3 "GND") + (pintype "passive") + (uuid "8ce33f08-44ac-4d15-acca-7b62eca58ef5") + ) + (embedded_fonts no) + (model "UVZ1V470MDD1TA.stp" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Library:conn_holepad" + (layer "F.Cu") + (uuid "cbc40c09-e30e-460a-bcc4-8171f797a030") + (at 89.88 69.8) + (property "Reference" "GND_A1" + (at 0 -0.5 0) + (unlocked yes) + (layer "F.SilkS") + (hide yes) + (uuid "0947c915-f5c6-432f-bac1-be020a7c7bb5") + (effects + (font + (size 1 1) + (thickness 0.1) + ) + ) + ) + (property "Value" "Conn_01x01_Pin" + (at 0 1 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "a5e5504f-2e7f-452d-96ef-037a92a4a23b") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "35fedb7b-b962-44fc-a5f8-1d30db13f476") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Generic connector, single row, 01x01, script generated" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "ce0bf894-68f0-4eb0-9f8d-03d9b5d59c91") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/dc9beee8-362a-431f-ae58-61cdcb6832dc") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (pad "1" thru_hole circle + (at 0 0) + (size 3 3) + (drill 1.5) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 3 "GND") + (pinfunction "Pin_1") + (pintype "passive") + (uuid "e567df10-68fb-4fdd-87c4-6b1de5057a6f") + ) + (embedded_fonts no) + ) + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "cc303b2f-da8c-4df0-8c75-83ec2aa6f6fc") + (at 56.86 120.6 -90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "R13" + (at 2.950784 -2.43873 0) + (layer "F.SilkS") + (uuid "40383974-586f-488f-8d15-c01cebca7367") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "2.2K" + (at 1.27 1.92 90) + (layer "F.Fab") + (hide yes) + (uuid "c2c5b360-c807-4f30-9b32-b41bbee60ce9") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "aee206dd-4468-4364-8214-1a093a911af2") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Resistor" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "280854fe-c3c6-4b28-ba78-de8a8a12bc8f") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/486efbe6-6d60-4f65-a28a-eac2f703a21a") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "0c243eae-8e52-488e-a46c-947e4f00312f") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "c3db4bd4-0b60-4cb5-b000-4ad70d25d9d2") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "e81289d4-047f-4bc2-896f-9a6e0ff93552") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "afbc005d-9813-4792-ae0f-efc02afcb9fb") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "4200db4c-fcd2-48e8-977c-4ee8d4040212") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "e402de82-732e-43fe-94e4-3ec091ea86f6") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "0609b196-f404-48f2-a5ed-1c23bbb9d89f") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "b8c28dfb-b198-482c-a03d-5187315aa79b") + ) + (pad "1" thru_hole circle + (at 0 0 270) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 9 "Net-(D2-K)") + (pintype "passive") + (uuid "430a3414-b187-4b96-962c-d5afbac9f47b") + ) + (pad "2" thru_hole oval + (at 2.54 0 270) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 10 "Net-(C10-Pad1)") + (pintype "passive") + (uuid "57635aef-4120-4aa4-87b9-0454e8f067e7") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Library:conn_holepad" + (layer "F.Cu") + (uuid "d52543a2-d091-4b9c-b89b-c6f43a6f94a3") + (at 60.67 69.8) + (property "Reference" "VCC_B2" + (at 0 -0.5 0) + (unlocked yes) + (layer "F.SilkS") + (hide yes) + (uuid "999556b9-5a96-4aa2-8b56-6ff0dc5ca186") + (effects + (font + (size 1 1) + (thickness 0.1) + ) + ) + ) + (property "Value" "Conn_01x01_Pin" + (at 0 1 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "6fce5574-8878-4437-a31a-399b7d6c31ad") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "2c6738d7-dc77-4d1f-9018-9062e610be37") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Generic connector, single row, 01x01, script generated" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "8ebea94a-dc88-4b40-ba4f-9485b075c8bd") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/6e74e034-da91-4106-b8de-7f1079a017da") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (pad "1" thru_hole circle + (at 0 0) + (size 3 3) + (drill 1.5) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 15 "Net-(VCC_B2-Pin_1)") + (pinfunction "Pin_1") + (pintype "passive") + (uuid "1cbaaaae-3dbb-4e2b-86b8-dcce87cdf954") + ) + (embedded_fonts no) + ) + (footprint "Connector_Pin:Pin_D1.0mm_L10.0mm" + (layer "F.Cu") + (uuid "d692ec11-ab6f-4974-8421-c0368dbf4bfd") + (at 87.34 107.9) + (descr "solder Pin_ diameter 1.0mm, hole diameter 1.0mm (press fit), length 10.0mm") + (tags "solder Pin_ press fit") + (property "Reference" "VCC_A1" + (at 0 2.54 0) + (layer "F.SilkS") + (uuid "bcc587bd-d6e7-4ee4-934b-57f69efee420") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "Conn_01x01_Pin" + (at 0 -2.05 0) + (layer "F.Fab") + (hide yes) + (uuid "76102052-38a6-4791-a45f-cc550315cc22") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "d2e2225d-a65d-4b05-acc2-4067d8a95c3a") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Generic connector, single row, 01x01, script generated" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "b5be9ed2-962c-48a9-bfc5-81a9d115bdd4") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/7056a7e2-eebb-4df3-8f54-dadb45bfed44") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_circle + (center 0 0) + (end 1.25 0.05) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "93f1e5e5-0c0e-4c7a-b73d-030d479f2f03") + ) + (fp_circle + (center 0 0) + (end 1.5 0) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + (uuid "d14b7f59-ddf5-434e-a696-7056665ee85a") + ) + (fp_circle + (center 0 0) + (end 0.5 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "b9a14ece-9b3b-46a2-aa18-c9f98a17f8db") + ) + (fp_circle + (center 0 0) + (end 1 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "2ea6bfbc-373f-49ce-87c4-76d0b945f499") + ) + (fp_text user "${REFERENCE}" + (at 0 2.54 0) + (layer "F.Fab") + (uuid "1a183987-d28e-4930-9de2-f47cf58afc0a") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" thru_hole circle + (at 0 0) + (size 2 2) + (drill 1) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 1 "Net-(D1-K)") + (pinfunction "Pin_1") + (pintype "passive") + (uuid "34803306-11b2-4687-9250-7e4da9c0467d") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Connector_Pin.3dshapes/Pin_D1.0mm_L10.0mm.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "d78725d9-47d7-4c83-be9b-4988d133a9b1") + (at 54.32 87.58 -90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "R17" + (at 3.02605 -2.438207 0) + (layer "F.SilkS") + (uuid "b5b0ae33-50f6-4aa9-bad9-6288811ae392") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "47K" + (at 1.27 1.92 90) + (layer "F.Fab") + (hide yes) + (uuid "4c53eb70-ba9c-4268-9c7f-16a0f882d12c") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "665cb565-ff0f-4677-a308-325af43d6683") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Resistor" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "061ef799-3c80-4782-99d1-be37b915e54d") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/8a64f8ab-cec7-4969-9401-c34ade5f0cb5") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "4b654bad-6c82-4e13-81eb-7690e7d65088") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "ecb0d627-3dd7-45ed-94b8-d110571a4102") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "351a8d7b-5519-49b6-be48-159d30d68ba9") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "027b16d4-ed89-4ecb-9d56-55b28958995a") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "a14ceb7e-9045-4f6b-a877-1bcdabbccfc3") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "b2638917-4ba7-4f9a-ba60-7bbf29a08545") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "04b0efa9-7fa9-4091-806e-0feb46bcca8a") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "247a97aa-db32-42a5-9497-b9292b6b560c") + ) + (pad "1" thru_hole circle + (at 0 0 270) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 14 "Net-(C12-Pad1)") + (pintype "passive") + (uuid "b7485c42-0a31-4c6d-b2c9-9bf54242cc73") + ) + (pad "2" thru_hole oval + (at 2.54 0 270) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 3 "GND") + (pintype "passive") + (uuid "c5b5e88b-0bde-42ff-bc86-61422ecab011") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "C47u63v:CAPPRD350W65D800H1250" + (layer "F.Cu") + (uuid "d9eee99c-ac07-4010-90bf-79bd31a2f61a") + (at 77.18 146) + (descr "EEU-EB1J470SJ-1") + (tags "Capacitor Polarised") + (property "Reference" "C3" + (at 1.91582 2.211304 0) + (layer "F.SilkS") + (uuid "68af9610-47d8-4b28-b278-6835e9f14d62") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Value" "47uF 63v" + (at 0 0 0) + (layer "F.SilkS") + (hide yes) + (uuid "797c0ff2-1abe-4cef-bea8-2fdb46466297") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "149a27a3-9382-48cc-ba82-ac9d9e3cc236") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Polarized capacitor" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "f5903234-3c2b-4c78-9b74-48440fe6869a") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/b794b8cc-7dca-48f0-a5b9-9fe56f5cb9c1") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_circle + (center 1.75 0) + (end 1.75 4) + (stroke + (width 0.2) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "f1b0b285-09c1-4cac-8dfb-1ae231a7707b") + ) + (fp_circle + (center 1.75 0) + (end 1.75 4) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "fcaa04ce-8c24-4122-bb76-2277c48bccb8") + ) + (pad "1" thru_hole rect + (at 0 0) + (size 1.275 1.275) + (drill 0.85) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 2 "Net-(C3-Pad1)") + (pintype "passive") + (uuid "21675859-af13-49a5-a89a-4474ecd9d726") + ) + (pad "2" thru_hole circle + (at 3.5 0) + (size 1.275 1.275) + (drill 0.85) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 4 "Net-(C3-Pad2)") + (pintype "passive") + (uuid "a8594eb3-c6a5-4d87-9514-85efd0312e03") + ) + (embedded_fonts no) + (model "EEU-EB1J470SJ.stp" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "ddaadb9e-34f4-4d27-b880-e32c97542663") + (at 82.26 120.6 -90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "R4" + (at 2.990888 -1.947178 180) + (layer "F.SilkS") + (uuid "43cbdaf2-5dad-4be4-9de3-4d78d516d7ab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "2.2K" + (at 1.27 1.92 90) + (layer "F.Fab") + (hide yes) + (uuid "832d4942-107e-4326-b3fb-18baf1123f02") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "182f3f42-234f-4aa6-8822-3a8dc642f264") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Resistor" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "2e9ddc3d-9464-4261-99c6-c9ae56e20b5a") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/831a82f3-bee1-4a20-9f0c-de8891a80b24") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "5de920bc-4e4d-4053-9613-313706e2500e") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "fd69e8ad-e9cf-4107-bfbb-ec8585d1b82d") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "554f7d26-3640-4294-a434-eabcfd4bc15f") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "1024eda9-edb0-4304-b86a-f738438a6539") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "c07d5f7c-5786-4121-9594-1fc82a628b7f") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "f7ad05db-2f1b-46fa-8b4b-5d2a50ac6c8f") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "76286cb1-2984-4886-ad44-69a694c5d13f") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "173aec12-1541-4d22-b2dc-2ce2e22a79aa") + ) + (pad "1" thru_hole circle + (at 0 0 270) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 1 "Net-(D1-K)") + (pintype "passive") + (uuid "a2f44d4a-752d-4b68-aa02-fc3a04b207fa") + ) + (pad "2" thru_hole oval + (at 2.54 0 270) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 5 "Net-(C4-Pad1)") + (pintype "passive") + (uuid "fdc90a4c-2006-4549-be27-2a173bff3e6b") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Connector_Pin:Pin_D1.0mm_L10.0mm" + (layer "F.Cu") + (uuid "eb2b727b-6c46-4603-9390-f7a52a6f2750") + (at 56.86 107.9) + (descr "solder Pin_ diameter 1.0mm, hole diameter 1.0mm (press fit), length 10.0mm") + (tags "solder Pin_ press fit") + (property "Reference" "VCC_B1" + (at 0 2.25 0) + (layer "F.SilkS") + (uuid "0fcbc334-e9b5-4b03-9f5f-48d04892b842") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "Conn_01x01_Pin" + (at 0 -2.05 0) + (layer "F.Fab") + (hide yes) + (uuid "d693ee10-12f0-40b1-acd0-b1f4f6a0d677") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "8deecbd9-eeca-43d6-b877-06a8d18f09a1") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Generic connector, single row, 01x01, script generated" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "03641573-8ca6-4ed3-a13c-b301b858cc21") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/6778b725-cc7e-4fa7-8d8b-1f47e2db759c") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_circle + (center 0 0) + (end 1.25 0.05) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "87fce251-3f66-46ee-9c2b-640083f0e3ef") + ) + (fp_circle + (center 0 0) + (end 1.5 0) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + (uuid "a93f1705-a556-4ce2-9fb9-5840e70a3de0") + ) + (fp_circle + (center 0 0) + (end 0.5 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "691e2d80-b959-4c7c-958d-8041b1a0f5f9") + ) + (fp_circle + (center 0 0) + (end 1 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "ccdcab9c-1148-4b7c-a5cc-08cbddc04d08") + ) + (fp_text user "${REFERENCE}" + (at 0 2.25 0) + (layer "F.Fab") + (uuid "705ee86f-7b1f-4c78-b3e6-e12f18a1ff44") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" thru_hole circle + (at 0 0) + (size 2 2) + (drill 1) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 9 "Net-(D2-K)") + (pinfunction "Pin_1") + (pintype "passive") + (uuid "30eff844-c514-488d-a74f-a90181e31452") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Connector_Pin.3dshapes/Pin_D1.0mm_L10.0mm.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "C47u35v:CAPPRD200W50D525H1250" + (layer "F.Cu") + (uuid "ee1741f5-8fe9-4aef-8cfa-1bdaf9b0d7f6") + (at 67.02 118.06 -90) + (descr "5*11") + (tags "Capacitor Polarised") + (property "Reference" "C14" + (at 4.811353 -1.175692 0) + (layer "F.SilkS") + (uuid "75c77906-4dc5-4d49-9c15-83f3025923e3") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Value" "47uF 35v" + (at 0 0 90) + (layer "F.SilkS") + (hide yes) + (uuid "5bda1c20-1d50-4b9b-ab0c-0b8357e40a88") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "cd2f0c52-1b56-4348-bc8c-7959b6eb8ca9") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Polarized capacitor" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "0d5a5e64-1344-41ef-b2c2-3c12962b397e") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/028b1213-6965-4c6b-88c6-99867053371d") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_circle + (center 1 0) + (end 1 2.625) + (stroke + (width 0.2) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "bc54e2fa-61af-42de-9f4f-d4840899512c") + ) + (fp_circle + (center 1 0) + (end 1 2.625) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "999edf3e-b089-400a-bdea-5554c000e468") + ) + (pad "1" thru_hole rect + (at 0 0 270) + (size 1.1 1.1) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 15 "Net-(VCC_B2-Pin_1)") + (pintype "passive") + (uuid "b6101f82-1379-437b-9a34-da0e4f4c85ec") + ) + (pad "2" thru_hole circle + (at 2 0 270) + (size 1.1 1.1) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 3 "GND") + (pintype "passive") + (uuid "88bfbde4-b27a-497d-9b8a-37ad5bce6032") + ) + (embedded_fonts no) + (model "UVZ1V470MDD1TA.stp" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Library:conn_holepad" + (layer "F.Cu") + (uuid "f4e09da5-de11-4910-938f-ad22f422a378") + (at 77.18 156.16) + (property "Reference" "X2A1" + (at -0.002784 2.539356 0) + (unlocked yes) + (layer "F.SilkS") + (uuid "d5f4a471-ed9d-4edc-bb23-bc08bbf7bf32") + (effects + (font + (size 1 1) + (thickness 0.1) + ) + ) + ) + (property "Value" "Conn_01x01_Pin" + (at 0 1 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "7b9076ea-7a3b-44da-9637-c3c60712ac36") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "ba197c54-7441-4c51-ae88-626016e931f5") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Generic connector, single row, 01x01, script generated" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "0cd07fbd-c075-427e-b50f-071cec277e17") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/02603ffc-8ef0-4551-98e5-69f3d0b5f5ed") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_text user "${REFERENCE}" + (at 0 2.5 0) + (unlocked yes) + (layer "F.Fab") + (uuid "1306ac26-2168-4d74-b747-b714a328742e") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" thru_hole circle + (at 0 0) + (size 3 3) + (drill 1.5) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 21 "Net-(X2A1-Pin_1)") + (pinfunction "Pin_1") + (pintype "passive") + (uuid "1b13fdac-fbab-47a5-83c7-5c17e6ca715a") + ) + (embedded_fonts no) + ) + (footprint "opa1642:SOIC127P600X175-8N" + (layer "B.Cu") + (uuid "3df34ff6-6920-43a3-9389-a99a8a5a4bd9") + (at 67.02 90.12 -90) + (descr "D0008A") + (tags "Integrated Circuit") + (property "Reference" "IC2" + (at 0 0 90) + (layer "B.SilkS") + (uuid "7ab03f5b-4dbe-4043-9c09-ca81c971378b") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + (justify mirror) + ) + ) + (property "Value" "OPA1642AID" + (at 0 0 90) + (layer "B.SilkS") + (hide yes) + (uuid "21191121-0451-4bc0-8c43-6a118ab7be55") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + (justify mirror) + ) + ) + (property "Datasheet" "" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "5a923597-b701-469d-abc1-e18c1f973800") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "\n \n Dual SoundPlus™ high-performance, JFET-input audio op amp\n \n" + (at -23.1 157.14 0) + (layer "F.Fab") + (hide yes) + (uuid "f4421172-45e5-41f4-a121-4257b5e50590") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Availability" "In Stock" + (at -23.1 157.14 0) + (layer "B.Fab") + (hide yes) + (uuid "2da86e55-0385-40cb-8882-6aa4fe686ee6") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (property "Check_prices" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=eda" + (at -23.1 157.14 0) + (layer "B.Fab") + (hide yes) + (uuid "00ee88a7-d2bf-471d-aa73-9d81787a8116") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (property "MANUFACTURER" "Texas Instruments" + (at -23.1 157.14 0) + (layer "B.Fab") + (hide yes) + (uuid "5e093ee3-1678-4e95-8ddb-6353b1f84e36") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (property "MAXIMUM_PACKAGE_HEIGHT" "1.75 mm" + (at -23.1 157.14 0) + (layer "B.Fab") + (hide yes) + (uuid "9207d135-f026-4e47-a3d8-3079324d0a01") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (property "MF" "Texas Instruments" + (at -23.1 157.14 0) + (layer "B.Fab") + (hide yes) + (uuid "e792fd29-dbbb-4613-ae02-4a13a77a2e5f") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (property "MP" "OPA1642AID" + (at -23.1 157.14 0) + (layer "B.Fab") + (hide yes) + (uuid "f442a8ec-0641-481b-8df1-82b6c1b7539c") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (property "PARTREV" "D" + (at -23.1 157.14 0) + (layer "B.Fab") + (hide yes) + (uuid "2e156cf0-c18b-4a82-8362-de866b9a8d5b") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (property "Package" "SOIC-8 Texas Instruments" + (at -23.1 157.14 0) + (layer "B.Fab") + (hide yes) + (uuid "04ba0cff-3ce1-4b73-86ba-8515be5a971a") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (property "Price" "None" + (at -23.1 157.14 0) + (layer "B.Fab") + (hide yes) + (uuid "09c67899-740e-4e36-9134-2b0ac542fa10") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (property "STANDARD" "IPC 7351B" + (at -23.1 157.14 0) + (layer "B.Fab") + (hide yes) + (uuid "be56c491-bf47-4e9c-b453-94907a3a51f6") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (property "SnapEDA_Link" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=snap" + (at -23.1 157.14 0) + (layer "B.Fab") + (hide yes) + (uuid "9657d99b-6f1f-463d-a66a-b8f5a60cd3a1") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (path "/e46d3b5f-0bed-4df1-a7ff-7fb3e0496ac5") + (sheetfile "retro.kicad_sch") + (attr smd) + (fp_line + (start -3.475 2.58) + (end -1.948 2.58) + (stroke + (width 0.2) + (type solid) + ) + (layer "B.SilkS") + (uuid "4ba2e218-d66f-433a-99ce-c0aba8017f15") + ) + (fp_line + (start -1.598 2.452) + (end 1.598 2.452) + (stroke + (width 0.2) + (type solid) + ) + (layer "B.SilkS") + (uuid "131d93cb-5ed0-47be-bfc4-cc8c8360c030") + ) + (fp_line + (start 1.598 2.452) + (end 1.598 -2.452) + (stroke + (width 0.2) + (type solid) + ) + (layer "B.SilkS") + (uuid "29a50c34-9072-49c7-a0a0-9c192fb183ab") + ) + (fp_line + (start -1.598 -2.452) + (end -1.598 2.452) + (stroke + (width 0.2) + (type solid) + ) + (layer "B.SilkS") + (uuid "bcdd0f5b-e8fd-4242-a11c-667ec30e092a") + ) + (fp_line + (start 1.598 -2.452) + (end -1.598 -2.452) + (stroke + (width 0.2) + (type solid) + ) + (layer "B.SilkS") + (uuid "dbf2a3aa-479b-49e0-9ed3-b6d343f94a44") + ) + (fp_line + (start -3.725 2.75) + (end 3.725 2.75) + (stroke + (width 0.05) + (type solid) + ) + (layer "B.CrtYd") + (uuid "e3a830bd-70bf-43fa-8411-57307f60abfe") + ) + (fp_line + (start 3.725 2.75) + (end 3.725 -2.75) + (stroke + (width 0.05) + (type solid) + ) + (layer "B.CrtYd") + (uuid "257f17a2-9701-4be4-9f56-f6d7fa9d7e23") + ) + (fp_line + (start -3.725 -2.75) + (end -3.725 2.75) + (stroke + (width 0.05) + (type solid) + ) + (layer "B.CrtYd") + (uuid "33d63245-0b86-4679-846f-9f2d45d02764") + ) + (fp_line + (start 3.725 -2.75) + (end -3.725 -2.75) + (stroke + (width 0.05) + (type solid) + ) + (layer "B.CrtYd") + (uuid "5a89c354-5527-4ee0-ba60-77c7881cd971") + ) + (fp_line + (start -1.948 2.452) + (end 1.948 2.452) + (stroke + (width 0.1) + (type solid) + ) + (layer "B.Fab") + (uuid "57abdd58-59f1-4a90-8ba3-166964f27bb7") + ) + (fp_line + (start 1.948 2.452) + (end 1.948 -2.452) + (stroke + (width 0.1) + (type solid) + ) + (layer "B.Fab") + (uuid "662b0489-51c6-4ec4-b6cf-76b8bd6b6370") + ) + (fp_line + (start -1.948 1.182) + (end -0.678 2.452) + (stroke + (width 0.1) + (type solid) + ) + (layer "B.Fab") + (uuid "d5548735-46c8-45d4-83d2-7300ccccc86a") + ) + (fp_line + (start -1.948 -2.452) + (end -1.948 2.452) + (stroke + (width 0.1) + (type solid) + ) + (layer "B.Fab") + (uuid "c3bf4815-2da1-412e-98a1-e0d962eeab47") + ) + (fp_line + (start 1.948 -2.452) + (end -1.948 -2.452) + (stroke + (width 0.1) + (type solid) + ) + (layer "B.Fab") + (uuid "cf79f700-d51a-4ec9-b719-038b079e3b22") + ) + (fp_text user "${REFERENCE}" + (at 0 0 90) + (layer "B.Fab") + (uuid "67213649-116b-44b4-a016-908d30e19bf3") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + (justify mirror) + ) + ) + (pad "1" smd rect + (at -2.711 1.905 180) + (size 0.65 1.528) + (layers "B.Cu" "B.Mask" "B.Paste") + (net 13 "Net-(C11-Pad2)") + (pintype "output") + (uuid "2fbfacf1-4eb5-40c6-bb8b-0f91dcc18e05") + ) + (pad "2" smd rect + (at -2.711 0.635 180) + (size 0.65 1.528) + (layers "B.Cu" "B.Mask" "B.Paste") + (net 13 "Net-(C11-Pad2)") + (pintype "input") + (uuid "778b80fd-e950-42d3-8fac-7497a66155cd") + ) + (pad "3" smd rect + (at -2.711 -0.635 180) + (size 0.65 1.528) + (layers "B.Cu" "B.Mask" "B.Paste") + (net 18 "Net-(SGNL_B1-Pin_1)") + (pintype "input") + (uuid "b6284a84-3a51-44fb-a8b8-477ad4f72f15") + ) + (pad "4" smd rect + (at -2.711 -1.905 180) + (size 0.65 1.528) + (layers "B.Cu" "B.Mask" "B.Paste") + (net 3 "GND") + (pintype "power_in") + (uuid "5404bce7-efa6-4418-852d-fa6f13572326") + ) + (pad "5" smd rect + (at 2.711 -1.905 180) + (size 0.65 1.528) + (layers "B.Cu" "B.Mask" "B.Paste") + (net 14 "Net-(C12-Pad1)") + (pintype "input") + (uuid "1ce196e2-76b3-456b-89af-f5c8710a9ca6") + ) + (pad "6" smd rect + (at 2.711 -0.635 180) + (size 0.65 1.528) + (layers "B.Cu" "B.Mask" "B.Paste") + (net 19 "Net-(IC2-Pad6)") + (pintype "input") + (uuid "3f001d35-b3f1-4d1c-bff8-c4562d7faed2") + ) + (pad "7" smd rect + (at 2.711 0.635 180) + (size 0.65 1.528) + (layers "B.Cu" "B.Mask" "B.Paste") + (net 11 "Net-(C10-Pad2)") + (pintype "output") + (uuid "a4088c01-4b23-4e86-ad63-95bdb41b011c") + ) + (pad "8" smd rect + (at 2.711 1.905 180) + (size 0.65 1.528) + (layers "B.Cu" "B.Mask" "B.Paste") + (net 15 "Net-(VCC_B2-Pin_1)") + (pintype "power_in") + (uuid "cdda338b-07c9-42fb-acce-81d9ace24aff") + ) + (embedded_fonts no) + (model "OPA1642AID.stp" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "opa1642:SOIC127P600X175-8N" + (layer "B.Cu") + (uuid "7cf4c0a4-a134-4e2d-a9f4-d4f0335ad8a0") + (at 77.18 90.12 -90) + (descr "D0008A") + (tags "Integrated Circuit") + (property "Reference" "IC1" + (at 0 0 90) + (layer "B.SilkS") + (uuid "48fcb5a8-de4a-49ed-9c39-0a45edaf5644") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + (justify mirror) + ) + ) + (property "Value" "OPA1642AID" + (at 0 0 90) + (layer "B.SilkS") + (hide yes) + (uuid "e980c6f1-3dd5-41e4-aff4-881a7810fd3b") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + (justify mirror) + ) + ) + (property "Datasheet" "" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "c25cbc4a-6bd4-47ad-8536-876aabb6d0c9") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "\n \n Dual SoundPlus™ high-performance, JFET-input audio op amp\n \n" + (at -12.94 167.3 0) + (layer "F.Fab") + (hide yes) + (uuid "362e886b-7522-4564-88c0-e6f2917b2548") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Availability" "In Stock" + (at -12.94 167.3 0) + (layer "B.Fab") + (hide yes) + (uuid "4fe48375-9213-43fd-a3ce-cbe43114d3b2") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (property "Check_prices" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=eda" + (at -12.94 167.3 0) + (layer "B.Fab") + (hide yes) + (uuid "d381481c-5896-4038-baf7-505d803e730a") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (property "MANUFACTURER" "Texas Instruments" + (at -12.94 167.3 0) + (layer "B.Fab") + (hide yes) + (uuid "0c1f3624-879c-40c8-a2a2-fb4ed2f16dd5") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (property "MAXIMUM_PACKAGE_HEIGHT" "1.75 mm" + (at -12.94 167.3 0) + (layer "B.Fab") + (hide yes) + (uuid "c87ee3be-0baf-4270-8f78-6ee7cb023b31") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (property "MF" "Texas Instruments" + (at -12.94 167.3 0) + (layer "B.Fab") + (hide yes) + (uuid "a148a76a-f356-4cd5-b970-cbd7c0f77c07") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (property "MP" "OPA1642AID" + (at -12.94 167.3 0) + (layer "B.Fab") + (hide yes) + (uuid "4b9a4eb3-7e0d-4821-a763-d451291003a7") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (property "PARTREV" "D" + (at -12.94 167.3 0) + (layer "B.Fab") + (hide yes) + (uuid "02826c73-af98-4f56-9a79-20c8447c991c") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (property "Package" "SOIC-8 Texas Instruments" + (at -12.94 167.3 0) + (layer "B.Fab") + (hide yes) + (uuid "5d915c3f-df9a-4702-90c8-92581aff5b87") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (property "Price" "None" + (at -12.94 167.3 0) + (layer "B.Fab") + (hide yes) + (uuid "846aed56-fd05-4dec-b518-44bcb04a0039") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (property "STANDARD" "IPC 7351B" + (at -12.94 167.3 0) + (layer "B.Fab") + (hide yes) + (uuid "53aeea43-86bc-46b2-b9c9-f8cf01106cbb") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (property "SnapEDA_Link" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=snap" + (at -12.94 167.3 0) + (layer "B.Fab") + (hide yes) + (uuid "90ae0200-2606-4851-816c-c327503b58f5") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (path "/adb405c9-094f-4a77-a219-d4048679141c") + (sheetfile "retro.kicad_sch") + (attr smd) + (fp_line + (start -3.475 2.58) + (end -1.948 2.58) + (stroke + (width 0.2) + (type solid) + ) + (layer "B.SilkS") + (uuid "4987cd9b-409e-4639-95b2-7988f6efac41") + ) + (fp_line + (start -1.598 2.452) + (end 1.598 2.452) + (stroke + (width 0.2) + (type solid) + ) + (layer "B.SilkS") + (uuid "e1d8020f-32ec-488c-8482-4347981fbbf2") + ) + (fp_line + (start 1.598 2.452) + (end 1.598 -2.452) + (stroke + (width 0.2) + (type solid) + ) + (layer "B.SilkS") + (uuid "f18e4cd9-d7e6-46b3-ac9f-9c7ce5d20559") + ) + (fp_line + (start -1.598 -2.452) + (end -1.598 2.452) + (stroke + (width 0.2) + (type solid) + ) + (layer "B.SilkS") + (uuid "077c0592-6626-4af3-842c-207009d40bb7") + ) + (fp_line + (start 1.598 -2.452) + (end -1.598 -2.452) + (stroke + (width 0.2) + (type solid) + ) + (layer "B.SilkS") + (uuid "7dd04dc5-0d6d-4f9c-8c6b-ab7bb6b47523") + ) + (fp_line + (start -3.725 2.75) + (end 3.725 2.75) + (stroke + (width 0.05) + (type solid) + ) + (layer "B.CrtYd") + (uuid "ab2f59ea-310d-4b7f-8328-3c4a915d4b49") + ) + (fp_line + (start 3.725 2.75) + (end 3.725 -2.75) + (stroke + (width 0.05) + (type solid) + ) + (layer "B.CrtYd") + (uuid "8a69ea1e-3605-442c-873c-c3877c9e2571") + ) + (fp_line + (start -3.725 -2.75) + (end -3.725 2.75) + (stroke + (width 0.05) + (type solid) + ) + (layer "B.CrtYd") + (uuid "4266a81e-f548-41f9-8523-14e6db9e1724") + ) + (fp_line + (start 3.725 -2.75) + (end -3.725 -2.75) + (stroke + (width 0.05) + (type solid) + ) + (layer "B.CrtYd") + (uuid "abd35881-88a4-4be3-a67e-31363880025e") + ) + (fp_line + (start -1.948 2.452) + (end 1.948 2.452) + (stroke + (width 0.1) + (type solid) + ) + (layer "B.Fab") + (uuid "2333be59-73ae-483a-9836-ef610aaddd14") + ) + (fp_line + (start 1.948 2.452) + (end 1.948 -2.452) + (stroke + (width 0.1) + (type solid) + ) + (layer "B.Fab") + (uuid "f3a72be3-480c-48cb-86f1-9b74814ffaae") + ) + (fp_line + (start -1.948 1.182) + (end -0.678 2.452) + (stroke + (width 0.1) + (type solid) + ) + (layer "B.Fab") + (uuid "5b15ff4f-b94b-4329-93a6-97c742c07889") + ) + (fp_line + (start -1.948 -2.452) + (end -1.948 2.452) + (stroke + (width 0.1) + (type solid) + ) + (layer "B.Fab") + (uuid "f9dc7044-1345-4c74-8392-92bcdaf4f525") + ) + (fp_line + (start 1.948 -2.452) + (end -1.948 -2.452) + (stroke + (width 0.1) + (type solid) + ) + (layer "B.Fab") + (uuid "6f8697fd-e0da-45e5-a0bb-6a6308141d72") + ) + (fp_text user "${REFERENCE}" + (at 0 0 90) + (layer "B.Fab") + (uuid "d46ea488-78be-483c-9644-e4f51b81e21d") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + (justify mirror) + ) + ) + (pad "1" smd rect + (at -2.711 1.905 180) + (size 0.65 1.528) + (layers "B.Cu" "B.Mask" "B.Paste") + (net 6 "Net-(C4-Pad2)") + (pintype "output") + (uuid "de8d7992-cea7-4454-bef2-0ae393fe4429") + ) + (pad "2" smd rect + (at -2.711 0.635 180) + (size 0.65 1.528) + (layers "B.Cu" "B.Mask" "B.Paste") + (net 6 "Net-(C4-Pad2)") + (pintype "input") + (uuid "97fbe7d0-32c8-47ef-85ae-e696bcb0104b") + ) + (pad "3" smd rect + (at -2.711 -0.635 180) + (size 0.65 1.528) + (layers "B.Cu" "B.Mask" "B.Paste") + (net 16 "Net-(SGNL_A1-Pin_1)") + (pintype "input") + (uuid "82632c34-11fe-46c8-91a9-46ac8f926739") + ) + (pad "4" smd rect + (at -2.711 -1.905 180) + (size 0.65 1.528) + (layers "B.Cu" "B.Mask" "B.Paste") + (net 3 "GND") + (pintype "power_in") + (uuid "2fbbe455-206b-4f3b-8542-5880a65d816a") + ) + (pad "5" smd rect + (at 2.711 -1.905 180) + (size 0.65 1.528) + (layers "B.Cu" "B.Mask" "B.Paste") + (net 7 "Net-(C5-Pad1)") + (pintype "input") + (uuid "d4532c89-058b-49c5-ac06-59239cb28bbf") + ) + (pad "6" smd rect + (at 2.711 -0.635 180) + (size 0.65 1.528) + (layers "B.Cu" "B.Mask" "B.Paste") + (net 17 "Net-(IC1-Pad6)") + (pintype "input") + (uuid "6faf1d0f-8776-42a8-b7bb-c08c8260601f") + ) + (pad "7" smd rect + (at 2.711 0.635 180) + (size 0.65 1.528) + (layers "B.Cu" "B.Mask" "B.Paste") + (net 4 "Net-(C3-Pad2)") + (pintype "output") + (uuid "e52b3a68-d4f8-4520-b5fa-c78e4d4231ae") + ) + (pad "8" smd rect + (at 2.711 1.905 180) + (size 0.65 1.528) + (layers "B.Cu" "B.Mask" "B.Paste") + (net 8 "Net-(VCC_A2-Pin_1)") + (pintype "power_in") + (uuid "4acc962d-aee4-4b2e-925c-89282e018113") + ) + (embedded_fonts no) + (model "OPA1642AID.stp" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (gr_circle + (center 57.495 77.591) + (end 55.241385 77.629116) + (stroke + (width 0.15) + (type default) + ) + (fill no) + (layer "F.SilkS") + (uuid "d78a8605-0faa-45b0-a883-fb5ba757e10d") + ) + (gr_circle + (center 86.495385 77.591) + (end 84.22977 77.629116) + (stroke + (width 0.15) + (type default) + ) + (fill no) + (layer "F.SilkS") + (uuid "74ba7f71-dc4b-4851-9c33-6c55ed8714ba") + ) + (gr_arc + (start 51.155914 66.091802) + (mid 51.529759 65.189328) + (end 52.432248 64.815468) + (stroke + (width 0.1) + (type default) + ) + (layer "Edge.Cuts") + (uuid "88ecc551-e657-45ea-9528-c0f9a0a6a25d") + ) + (gr_line + (start 51.155914 66.091802) + (end 54.923769 156.333) + (stroke + (width 0.1) + (type default) + ) + (layer "Edge.Cuts") + (uuid "c840ab66-863d-4edf-8993-ecb9072a5357") + ) + (gr_line + (start 52.432248 64.815468) + (end 91.578521 64.817237) + (stroke + (width 0.1) + (type default) + ) + (layer "Edge.Cuts") + (uuid "33d19db6-c008-49ec-97b4-4d648cf0e5a2") + ) + (gr_line + (start 55.015769 156.333) + (end 54.923769 156.333) + (stroke + (width 0.1) + (type default) + ) + (layer "Edge.Cuts") + (uuid "00c33ccb-8250-48c5-86b2-2bf2450fe837") + ) + (gr_arc + (start 55.015769 156.333) + (mid 57.106138 157.198853) + (end 57.972 159.289231) + (stroke + (width 0.1) + (type default) + ) + (layer "Edge.Cuts") + (uuid "bec32d07-79ec-4cb1-a483-8aabd22cc57b") + ) + (gr_line + (start 57.972 159.289231) + (end 86.038769 159.291) + (stroke + (width 0.1) + (type default) + ) + (layer "Edge.Cuts") + (uuid "492a0e52-3505-4eff-b233-23a6f27b5c18") + ) + (gr_arc + (start 86.038769 159.291) + (mid 86.904653 157.200674) + (end 88.995 156.334769) + (stroke + (width 0.1) + (type default) + ) + (layer "Edge.Cuts") + (uuid "cede8dad-cd64-44e3-9657-2ee8823340ac") + ) + (gr_line + (start 88.995 156.334769) + (end 89.087 156.334769) + (stroke + (width 0.1) + (type default) + ) + (layer "Edge.Cuts") + (uuid "7ddecae6-4c4b-42b0-bab0-5e26d93e32e6") + ) + (gr_arc + (start 91.578521 64.817237) + (mid 92.481003 65.191089) + (end 92.854855 66.093571) + (stroke + (width 0.1) + (type default) + ) + (layer "Edge.Cuts") + (uuid "455ddf0d-7497-49f4-92c2-28e3811e4ba9") + ) + (gr_line + (start 92.854855 66.093571) + (end 89.087 156.334769) + (stroke + (width 0.1) + (type default) + ) + (layer "Edge.Cuts") + (uuid "f2ed6753-d7ba-4ccc-ab01-db834b2589fd") + ) + (gr_text "senke 2025" + (at 90.063107 105.686999 90) + (layer "F.Cu" knockout) + (uuid "81178e4f-6204-475d-9d9f-29553ce9a21b") + (effects + (font + (size 1 1) + (thickness 0.25) + (bold yes) + ) + (justify left bottom) + ) + ) + (gr_text "capsule" + (at 67.482734 67.292707 0) + (layer "F.Cu" knockout) + (uuid "f3c31054-420d-4d95-8d93-ef87df79b9ce") + (effects + (font + (size 1.5 1.5) + (thickness 0.3) + (bold yes) + (italic yes) + ) + (justify left bottom) + ) + ) + (gr_text "XLR" + (at 69.789193 153.371392 0) + (layer "F.Cu" knockout) + (uuid "367109ff-45e2-4dd4-a867-67d045227ac0") + (effects + (font + (size 1.5 1.5) + (thickness 0.3) + (bold yes) + (italic yes) + ) + (justify left bottom) + ) + ) + (gr_text "talas.fr" + (at 88.216471 105.351247 90) + (layer "F.Cu" knockout) + (uuid "d09b2539-7373-4473-a5f0-c8459ea8232d") + (effects + (font + (size 1.5 1.5) + (thickness 0.3) + (bold yes) + ) + (justify left bottom) + ) + ) + (gr_text "GND_B1" + (at 54.221358 72.707931 0) + (layer "F.SilkS") + (uuid "8e34020d-ee90-4bea-acee-401facaca816") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (gr_text "VCC_B2" + (at 60.571358 72.707931 0) + (layer "F.SilkS") + (uuid "45eb5003-35fc-42b1-b550-d82b87dc2308") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (gr_text "SGNL_B1" + (at 66.921358 72.707931 0) + (layer "F.SilkS") + (uuid "7199f138-4675-4532-802c-8a270467b896") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (gr_text "2026-04 dual OPA1642" + (at 72 155.5 0) + (layer "F.SilkS") + (uuid "36144690-64c8-4a99-a016-2ca74a0d3daf") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (gr_text "SGNL_A1" + (at 77.081358 72.707931 0) + (layer "F.SilkS") + (uuid "ca1ce028-c4b6-4e6d-8613-a3acf2c1d838") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (gr_text "VCC_A2" + (at 83.431358 72.707931 0) + (layer "F.SilkS") + (uuid "e096f130-20bb-4a15-b169-12682ad3daa8") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (gr_text "GND_A1" + (at 89.781358 72.707931 0) + (layer "F.SilkS") + (uuid "13144784-7da2-4b4e-8378-dfc12272a967") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (gr_text "TALAS ONE PREAMP P2" + (at 72 75 0) + (layer "F.SilkS") + (uuid "619eadaa-f43f-405a-95da-38ba61b89cc3") + (effects + (font + (size 1.2 1.2) + (thickness 0.15) + ) + ) + ) + (gr_text "TALAS" + (at 72 112 0) + (layer "B.SilkS") + (uuid "a6c77bc8-9c91-4f02-adb0-c605fccb12bd") + (effects + (font + (size 2 2) + (thickness 0.15) + ) + ) + ) + (gr_text "GND_B1" + (at 54.221358 72.707931 0) + (layer "F.Fab") + (uuid "f822b50d-810f-4469-a3b4-13f7ecdb3896") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (gr_text "VCC_B2" + (at 60.571358 72.707931 0) + (layer "F.Fab") + (uuid "7d8d8aa4-9316-4eb8-8e65-366793df64c3") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (gr_text "SGNL_B1" + (at 66.921358 72.707931 0) + (layer "F.Fab") + (uuid "f5fd0f85-7d20-48ef-9e08-f1615af2a5b0") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (gr_text "SGNL_A1" + (at 77.081358 72.707931 0) + (layer "F.Fab") + (uuid "77aab8de-1485-43a0-8253-6813f49783a1") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (gr_text "VCC_A2" + (at 83.431358 72.707931 0) + (layer "F.Fab") + (uuid "a362efc1-93b0-498c-a9b5-5ad8e9dde368") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (gr_text "GND_A1" + (at 89.781358 72.707931 0) + (layer "F.Fab") + (uuid "da20e25f-bcc9-4b72-9cae-1c851ad01816") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (segment + (start 82.26 108.927) + (end 81.2013 109.986) + (width 0.25) + (layer "F.Cu") + (net 1) + (uuid "033ed2bb-8469-4304-85c0-bf1822acd097") + ) + (segment + (start 87.34 115.52) + (end 87.34 120.6) + (width 0.25) + (layer "F.Cu") + (net 1) + (uuid "5b7910c5-b356-43cf-93e4-9129027fce53") + ) + (segment + (start 81.2013 114.461) + (end 82.26 115.52) + (width 0.25) + (layer "F.Cu") + (net 1) + (uuid "6ceba954-2229-49e6-955d-305504d99db7") + ) + (segment + (start 82.26 120.6) + (end 82.26 115.52) + (width 0.25) + (layer "F.Cu") + (net 1) + (uuid "8f976c81-d877-4384-a08c-3ca17cafc9a7") + ) + (segment + (start 81.2013 109.986) + (end 81.2013 114.461) + (width 0.25) + (layer "F.Cu") + (net 1) + (uuid "947eee9b-2039-4bfc-96c8-2b3f72776459") + ) + (segment + (start 82.26 107.9) + (end 82.26 108.927) + (width 0.25) + (layer "F.Cu") + (net 1) + (uuid "f0123df6-f5c1-44e7-b1b5-db88687f71b8") + ) + (segment + (start 78.0569 124.803) + (end 82.26 120.6) + (width 0.25) + (layer "B.Cu") + (net 1) + (uuid "0f933596-8e11-4139-b28f-3d53e2b65e8f") + ) + (segment + (start 77.18 125.68) + (end 77.18 124.803) + (width 0.25) + (layer "B.Cu") + (net 1) + (uuid "43b6479b-b5e7-4c93-a126-9d36bedc1575") + ) + (segment + (start 77.18 124.803) + (end 78.0569 124.803) + (width 0.25) + (layer "B.Cu") + (net 1) + (uuid "468ff319-7061-4497-9d76-148f0a46bce9") + ) + (segment + (start 87.34 115.52) + (end 82.26 115.52) + (width 0.25) + (layer "B.Cu") + (net 1) + (uuid "e8ed593d-4fde-4ca5-973b-825aa6c34f02") + ) + (segment + (start 82.26 107.9) + (end 87.34 107.9) + (width 0.25) + (layer "B.Cu") + (net 1) + (uuid "f2e1bcf5-7192-4f9b-84ac-cab1a56402ee") + ) + (segment + (start 87.34 123.14) + (end 87.34 128.22) + (width 0.25) + (layer "F.Cu") + (net 2) + (uuid "5f1b3636-cc0a-4b84-b10d-87032e3c549a") + ) + (segment + (start 77.18 145.036) + (end 85.8254 136.39) + (width 0.25) + (layer "B.Cu") + (net 2) + (uuid "3de93b22-4b07-4749-9b80-faadfb0dfe41") + ) + (segment + (start 85.8254 136.39) + (end 85.8254 129.735) + (width 0.25) + (layer "B.Cu") + (net 2) + (uuid "611ec917-5917-421b-a96c-cdce32b8428f") + ) + (segment + (start 85.8254 129.735) + (end 87.34 128.22) + (width 0.25) + (layer "B.Cu") + (net 2) + (uuid "6acbe092-0b0d-48bc-84b6-882d58d868b0") + ) + (segment + (start 77.18 146) + (end 77.18 145.036) + (width 0.25) + (layer "B.Cu") + (net 2) + (uuid "737fa8f5-9acd-46ae-89c3-8976c3b7cd30") + ) + (segment + (start 64.0947 113.62) + (end 64.0947 117.135) + (width 0.25) + (layer "F.Cu") + (net 3) + (uuid "011514d0-e73c-4507-8bee-ecb4698c5cf8") + ) + (segment + (start 58.3134 107.839) + (end 64.0947 113.62) + (width 0.25) + (layer "F.Cu") + (net 3) + (uuid "18621ccc-97d1-422b-a191-1af0d6a3d70c") + ) + (segment + (start 69.02 88.8035) + (end 65.4765 85.26) + (width 0.25) + (layer "F.Cu") + (net 3) + (uuid "1ea53e3a-3a03-4959-9693-6513bbb2a06a") + ) + (segment + (start 78.0569 126.803) + (end 78.0569 111.317) + (width 0.25) + (layer "F.Cu") + (net 3) + (uuid "209b7696-56e1-4224-af84-7fd6d1d04f56") + ) + (segment + (start 64.0947 117.135) + (end 67.02 120.06) + (width 0.25) + (layer "F.Cu") + (net 3) + (uuid "27ab4cda-0b13-471f-9f30-93674f24404f") + ) + (segment + (start 59.4 87.58) + (end 59.4 88.6069) + (width 0.25) + (layer "F.Cu") + (net 3) + (uuid "3bd23884-6659-4488-9734-e307f95f4561") + ) + (segment + (start 59.4 88.6069) + (end 58.3134 89.6935) + (width 0.25) + (layer "F.Cu") + (net 3) + (uuid "3ca0f2c6-e7ac-4621-9547-60df783c3c76") + ) + (segment + (start 72.1 132.76) + (end 72.1 156.16) + (width 0.25) + (layer "F.Cu") + (net 3) + (uuid "4a57c764-e240-44fe-9e4a-a44909338814") + ) + (segment + (start 62.92 85.26) + (end 62.42 85.76) + (width 0.25) + (layer "F.Cu") + (net 3) + (uuid "62925fb2-2034-4a89-890c-723060adf64a") + ) + (segment + (start 54.32 90.12) + (end 52.69 88.49) + (width 0.25) + (layer "F.Cu") + (net 3) + (uuid "8a063b81-c04a-45fa-a1d0-37a4b91aa557") + ) + (segment + (start 77.18 127.68) + (end 72.1 132.76) + (width 0.25) + (layer "F.Cu") + (net 3) + (uuid "9450e8b7-97b0-4fef-b6c2-09de9444a4da") + ) + (segment + (start 52.69 88.49) + (end 52.69 71.43) + (width 0.25) + (layer "F.Cu") + (net 3) + (uuid "9e2e9213-6763-48c0-967c-31cb121ee944") + ) + (segment + (start 65.4765 85.26) + (end 62.92 85.26) + (width 0.25) + (layer "F.Cu") + (net 3) + (uuid "a8d366dd-9c28-4cf5-8b0c-6c5c75263d45") + ) + (segment + (start 78.0569 111.317) + (end 77.18 110.44) + (width 0.25) + (layer "F.Cu") + (net 3) + (uuid "ab78860f-29ed-46ac-886f-71b5cbc58123") + ) + (segment + (start 62.42 89.961187) + (end 60.095148 92.286039) + (width 0.25) + (layer "F.Cu") + (net 3) + (uuid "bde925c7-61e6-43f7-963c-54b2758ba7ab") + ) + (segment + (start 62.42 85.76) + (end 62.42 89.961187) + (width 0.25) + (layer "F.Cu") + (net 3) + (uuid "c6eabf49-37df-4769-9bf4-68a3c7d6d9ad") + ) + (segment + (start 69.02 110.44) + (end 69.02 88.8035) + (width 0.25) + (layer "F.Cu") + (net 3) + (uuid "d0570697-78d4-43c6-99c2-8047b7716482") + ) + (segment + (start 52.69 71.43) + (end 54.32 69.8) + (width 0.25) + (layer "F.Cu") + (net 3) + (uuid "d4631fd8-c765-48e9-b922-c1bd07952ee4") + ) + (segment + (start 58.3134 89.6935) + (end 58.3134 107.839) + (width 0.25) + (layer "F.Cu") + (net 3) + (uuid "f26086f4-295c-444a-b07e-f5b1beeede6b") + ) + (segment + (start 77.18 127.68) + (end 78.0569 126.803) + (width 0.25) + (layer "F.Cu") + (net 3) + (uuid "f900bd41-8a8e-4cc2-9459-860be8914972") + ) + (via + (at 69.02 88.8035) + (size 0.8) + (drill 0.4) + (layers "F.Cu" "B.Cu") + (net 3) + (uuid "129a9b89-5231-41d6-b6b7-0b4c17a0b92c") + ) + (via + (at 60.095148 92.286039) + (size 0.8) + (drill 0.4) + (layers "F.Cu" "B.Cu") + (net 3) + (uuid "1fae0adb-002a-477a-9d38-b1293b358999") + ) + (segment + (start 89.88 87.58) + (end 91.51 85.95) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "020e3c31-f49e-4bf8-afb1-a3378dbe861b") + ) + (segment + (start 79.085 87.409) + (end 79.085 87.6903) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "029076ff-0072-4ee6-8e0d-7d0a4bb36558") + ) + (segment + (start 68.925 88.4999) + (end 68.925 87.409) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "0432c1c9-9c7b-434c-8df5-f1b8cd7c2a11") + ) + (segment + (start 79.085 87.6903) + (end 78.2754 88.4999) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "0530d8a5-231e-4b26-8bab-e4534cf5b4d0") + ) + (segment + (start 67.02 120.06) + (end 77.18 120.06) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "08323eb8-51d0-445e-876a-d6a559a18f87") + ) + (segment + (start 61.94 112.98) + (end 56.86 112.98) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "10c684c4-384b-4bb1-9802-27a017234b10") + ) + (segment + (start 69.9247 109.535) + (end 69.02 110.44) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "200f0b78-46d3-4086-ba11-e7c9fdef8ef3") + ) + (segment + (start 67.02 127.68) + (end 77.18 127.68) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "206855e3-6ef7-4f28-be50-ae130a134168") + ) + (segment + (start 89.88 87.58) + (end 88.995 86.695) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "2b3a4b4c-dc26-4ea9-a6ce-f3d40a36d287") + ) + (segment + (start 69.02 88.4999) + (end 69.02 88.8035) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "3795d412-e14a-41e8-8f49-ab7d279b549d") + ) + (segment + (start 82.3471 90.0729) + (end 84.8 87.62) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "39477db4-ebc9-4055-8bdf-e52fb8d0bda8") + ) + (segment + (start 66.48 112.98) + (end 61.94 112.98) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "5bc49640-0fb6-45cf-86f7-949f08b8f773") + ) + (segment + (start 62.9198 90.0729) + (end 82.3471 90.0729) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "62811476-ee45-4e1f-b41b-4f7210083eb8") + ) + (segment + (start 69.02 110.44) + (end 66.48 112.98) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "630ccbc0-97c6-498c-b9fb-b76aec5abe5a") + ) + (segment + (start 77.18 110.44) + (end 76.2753 109.535) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "6b04eb24-4d04-4fbc-8f8b-fecd472cb035") + ) + (segment + (start 59.4 87.58) + (end 60.4269 87.58) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "7e5dc6c4-f876-4f74-b4c1-a48b6f4862b1") + ) + (segment + (start 69.02 88.4999) + (end 68.925 88.4999) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "89a8cd68-57ef-456b-9590-bd7f0c4ad535") + ) + (segment + (start 91.51 71.43) + (end 89.88 69.8) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "8c90b011-8b8c-400f-95d3-7f69d18891db") + ) + (segment + (start 76.2753 109.535) + (end 69.9247 109.535) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "b0b7525a-365f-4a95-a51a-0538227cfddc") + ) + (segment + (start 91.51 85.95) + (end 91.51 71.43) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "b68031b4-f189-46ec-86f8-7deeadf0408b") + ) + (segment + (start 56.486039 92.286039) + (end 54.32 90.12) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "bc108439-51a0-405a-8800-1d928eeebab0") + ) + (segment + (start 79.72 112.98) + (end 77.18 110.44) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "bf74106a-38d0-4ac9-894b-b3257172b551") + ) + (segment + (start 78.2754 88.4999) + (end 69.02 88.4999) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "c61e81df-31c9-4137-9809-73b07d0f6924") + ) + (segment + (start 82.26 112.98) + (end 79.72 112.98) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "d581192b-5ad9-44e8-8c5c-a8e50245b8ee") + ) + (segment + (start 60.095148 92.286039) + (end 56.486039 92.286039) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "e6c6c8af-431d-44e3-80e5-8bf5b73c9e7b") + ) + (segment + (start 79.799 86.695) + (end 79.085 87.409) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "ea06388d-501b-40d4-a754-9214f9986ba8") + ) + (segment + (start 88.995 86.695) + (end 79.799 86.695) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "ecf260d7-8e62-49eb-b41d-e130e4bfcac0") + ) + (segment + (start 60.4269 87.58) + (end 62.9198 90.0729) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "fed4ad18-75fd-4576-b8e0-3843781eaf50") + ) + (segment + (start 87.34 112.98) + (end 82.26 112.98) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "ffd8f634-a55d-4ffa-b2c2-db6a48589650") + ) + (segment + (start 81.6611 131.613) + (end 80.7494 130.702) + (width 0.25) + (layer "F.Cu") + (net 4) + (uuid "41914ef8-2b70-4516-8b91-8d4a1c6ad113") + ) + (segment + (start 80.7494 99.7963) + (end 79.72 98.7669) + (width 0.25) + (layer "F.Cu") + (net 4) + (uuid "44f9646d-9bb7-4aa7-8f3b-13190119d9e3") + ) + (segment + (start 81.6611 145.019) + (end 81.6611 131.613) + (width 0.25) + (layer "F.Cu") + (net 4) + (uuid "573a7f29-8016-4176-9747-7bb9b08d1bbc") + ) + (segment + (start 80.68 146) + (end 81.6611 145.019) + (width 0.25) + (layer "F.Cu") + (net 4) + (uuid "64ca9b3b-9090-4837-b7d7-2062f1c94b8d") + ) + (segment + (start 80.7494 130.702) + (end 80.7494 99.7963) + (width 0.25) + (layer "F.Cu") + (net 4) + (uuid "7fb442c0-5ad0-403d-8b4b-4fc69a0296fe") + ) + (segment + (start 79.72 98.7669) + (end 79.72 97.74) + (width 0.25) + (layer "F.Cu") + (net 4) + (uuid "ce845281-4dd4-45e5-8e01-fed6dd598892") + ) + (segment + (start 76.1222 94.3447) + (end 76.545 93.9219) + (width 0.25) + (layer "B.Cu") + (net 4) + (uuid "5ee15710-e1f9-427f-a849-9bca30ae3891") + ) + (segment + (start 77.636 98.7971) + (end 76.729 98.7971) + (width 0.25) + (layer "B.Cu") + (net 4) + (uuid "6a28c046-4bde-4928-829f-220e428921e7") + ) + (segment + (start 79.72 97.74) + (end 78.6931 97.74) + (width 0.25) + (layer "B.Cu") + (net 4) + (uuid "bfe7d129-aa68-4bf4-acb8-3382809ad7b2") + ) + (segment + (start 78.6931 97.74) + (end 77.636 98.7971) + (width 0.25) + (layer "B.Cu") + (net 4) + (uuid "c041df09-87bc-4514-ba24-8502e2981e0b") + ) + (segment + (start 76.729 98.7971) + (end 76.1222 98.1903) + (width 0.25) + (layer "B.Cu") + (net 4) + (uuid "c7bf2868-9744-4d90-ae42-781f22730798") + ) + (segment + (start 76.1222 98.1903) + (end 76.1222 94.3447) + (width 0.25) + (layer "B.Cu") + (net 4) + (uuid "ec9df18b-c318-4a01-b823-7386bafb5273") + ) + (segment + (start 76.545 93.9219) + (end 76.545 92.831) + (width 0.25) + (layer "B.Cu") + (net 4) + (uuid "ff9a395c-2705-4936-a7a2-3124e4d8609e") + ) + (segment + (start 82.26 123.14) + (end 82.26 128.22) + (width 0.25) + (layer "F.Cu") + (net 5) + (uuid "b0159e10-7e34-4899-8e29-f6ae0eb2a7ae") + ) + (segment + (start 77.18 135.84) + (end 77.18 133.3) + (width 0.25) + (layer "B.Cu") + (net 5) + (uuid "14098f69-dbc8-4e6c-899a-833c4bd5d92f") + ) + (segment + (start 77.18 133.3) + (end 82.26 128.22) + (width 0.25) + (layer "B.Cu") + (net 5) + (uuid "1918a999-926d-40c9-b091-a03b127d731e") + ) + (segment + (start 55.385 117.185431) + (end 60.915 122.715431) + (width 0.25) + (layer "B.Cu") + (net 6) + (uuid "20485865-867d-4b6e-98a7-6a1a46f1d983") + ) + (segment + (start 58.314035 81.5) + (end 52.845 86.969035) + (width 0.25) + (layer "B.Cu") + (net 6) + (uuid "22ffb634-55ca-47d8-b35e-94df96630623") + ) + (segment + (start 79.7175 136.8025) + (end 80.68 135.84) + (width 0.25) + (layer "B.Cu") + (net 6) + (uuid "266a9e0a-3ca9-4df3-a74c-b8f0d69b6020") + ) + (segment + (start 75.275 87.409) + (end 76.545 87.409) + (width 0.25) + (layer "B.Cu") + (net 6) + (uuid "36256fb9-19d6-452d-99bf-3a8b4324e23c") + ) + (segment + (start 65.695 135.876181) + (end 66.621319 136.8025) + (width 0.25) + (layer "B.Cu") + (net 6) + (uuid "76b279f3-e785-4e8d-801d-41915b93b12c") + ) + (segment + (start 65.695 128.344569) + (end 65.695 135.876181) + (width 0.25) + (layer "B.Cu") + (net 6) + (uuid "8bec5deb-cd89-47d6-8882-b501fbe0a891") + ) + (segment + (start 70.636 81.5) + (end 58.314035 81.5) + (width 0.25) + (layer "B.Cu") + (net 6) + (uuid "93d90ac5-1a43-4783-a9e9-95d1bfca4ee4") + ) + (segment + (start 76.545 87.409) + (end 70.636 81.5) + (width 0.25) + (layer "B.Cu") + (net 6) + (uuid "a1f48c80-8a07-4d52-a1dd-172340092c19") + ) + (segment + (start 52.845 86.969035) + (end 52.845 91.821396) + (width 0.25) + (layer "B.Cu") + (net 6) + (uuid "a26eb255-0042-4be1-86c4-462b15cb981a") + ) + (segment + (start 55.385 94.361396) + (end 55.385 117.185431) + (width 0.25) + (layer "B.Cu") + (net 6) + (uuid "a8a5c44a-7f62-4317-b64f-b6fdb6ea42b4") + ) + (segment + (start 52.845 91.821396) + (end 55.385 94.361396) + (width 0.25) + (layer "B.Cu") + (net 6) + (uuid "bc031759-9481-49cf-86b8-228f02bd227e") + ) + (segment + (start 60.915 122.715431) + (end 60.915 123.564569) + (width 0.25) + (layer "B.Cu") + (net 6) + (uuid "c3adf3d2-20c5-45f8-8bfe-e097078cee6b") + ) + (segment + (start 66.621319 136.8025) + (end 79.7175 136.8025) + (width 0.25) + (layer "B.Cu") + (net 6) + (uuid "e4df9d41-5496-4c90-bd01-e5ca04054f98") + ) + (segment + (start 60.915 123.564569) + (end 65.695 128.344569) + (width 0.25) + (layer "B.Cu") + (net 6) + (uuid "e609d6b5-2dee-4f0f-a115-8e213979029d") + ) + (segment + (start 75.18 110.44) + (end 75.18 94.2099) + (width 0.25) + (layer "F.Cu") + (net 7) + (uuid "6bc86e2c-2996-49bf-aa44-5c72550b6336") + ) + (segment + (start 74.01 82.5) + (end 74.01 93.0399) + (width 0.25) + (layer "F.Cu") + (net 7) + (uuid "957b566a-aea2-435e-b4cb-2c411feda973") + ) + (segment + (start 75.18 94.2099) + (end 78.5737 94.2099) + (width 0.25) + (layer "F.Cu") + (net 7) + (uuid "df89d961-57d2-49eb-bbca-59874808f559") + ) + (segment + (start 74.01 93.0399) + (end 75.18 94.2099) + (width 0.25) + (layer "F.Cu") + (net 7) + (uuid "f4e04e41-0b1f-4874-82b2-cb4080d896d3") + ) + (via + (at 78.5737 94.2099) + (size 0.8) + (drill 0.4) + (layers "F.Cu" "B.Cu") + (net 7) + (uuid "efd79e95-8324-4136-8fac-9615285e42c7") + ) + (segment + (start 79.085 94.1379) + (end 82.711 94.1379) + (width 0.25) + (layer "B.Cu") + (net 7) + (uuid "280f19ec-4ae6-48ec-8c75-cf612e900837") + ) + (segment + (start 83.7731 95.2) + (end 84.8 95.2) + (width 0.25) + (layer "B.Cu") + (net 7) + (uuid "39d1744e-0b1c-4b49-9a1f-df989157daa7") + ) + (segment + (start 84.8 95.2) + (end 89.88 90.12) + (width 0.25) + (layer "B.Cu") + (net 7) + (uuid "7199385e-82ba-45a4-8d99-940d43022047") + ) + (segment + (start 79.085 94.1379) + (end 79.013 94.2099) + (width 0.25) + (layer "B.Cu") + (net 7) + (uuid "71a3bca3-c4e9-4b67-9dfd-7c0b7b600969") + ) + (segment + (start 79.085 92.831) + (end 79.085 94.1379) + (width 0.25) + (layer "B.Cu") + (net 7) + (uuid "8b121a54-ab83-4a67-b050-7eb62b70d62b") + ) + (segment + (start 79.013 94.2099) + (end 78.5737 94.2099) + (width 0.25) + (layer "B.Cu") + (net 7) + (uuid "8d174f60-2811-4740-bac5-ef04d050456d") + ) + (segment + (start 82.711 94.1379) + (end 83.7731 95.2) + (width 0.25) + (layer "B.Cu") + (net 7) + (uuid "95248e96-1c28-4d02-a242-e23471082208") + ) + (segment + (start 82.26 91.39) + (end 82.26 95.2) + (width 0.25) + (layer "F.Cu") + (net 8) + (uuid "31842fad-80d1-4205-ade9-cb599793e47c") + ) + (segment + (start 84.8 90.12) + (end 83.53 90.12) + (width 0.25) + (layer "F.Cu") + (net 8) + (uuid "66071923-5a15-412d-8a71-fbc223391dfd") + ) + (segment + (start 83.53 90.12) + (end 83.53 69.8) + (width 0.25) + (layer "F.Cu") + (net 8) + (uuid "a47341c9-1190-4a53-ab9c-3cba13e5ed44") + ) + (segment + (start 82.26 95.2) + (end 82.26 105.36) + (width 0.25) + (layer "F.Cu") + (net 8) + (uuid "f6f6da33-710a-43ce-a559-5bb62d603a7a") + ) + (segment + (start 83.53 90.12) + (end 82.26 91.39) + (width 0.25) + (layer "F.Cu") + (net 8) + (uuid "ffcd4bda-db79-4da9-a8a3-635187e176a4") + ) + (segment + (start 78.0569 118.06) + (end 81.8669 114.25) + (width 0.25) + (layer "B.Cu") + (net 8) + (uuid "1560c018-4a1e-46d8-af76-960dc75055c1") + ) + (segment + (start 88.4173 113.412) + (end 88.4173 112.604) + (width 0.25) + (layer "B.Cu") + (net 8) + (uuid "42827461-628a-47fa-b08f-33f87ae0f439") + ) + (segment + (start 87.4211 111.608) + (end 84.5051 111.608) + (width 0.25) + (layer "B.Cu") + (net 8) + (uuid "5a20b21c-7f67-48bc-9682-35ad7807ea62") + ) + (segment + (start 81.8669 114.25) + (end 87.5788 114.25) + (width 0.25) + (layer "B.Cu") + (net 8) + (uuid "75a2aedf-a1f0-436d-8b60-33805d7773c0") + ) + (segment + (start 83.1799 91.7401) + (end 84.8 90.12) + (width 0.25) + (layer "B.Cu") + (net 8) + (uuid "7c315e74-68bb-47b9-b791-ef151f0a99ad") + ) + (segment + (start 88.4173 112.604) + (end 87.4211 111.608) + (width 0.25) + (layer "B.Cu") + (net 8) + (uuid "7e905f53-d12e-4c6c-a95f-df022685b381") + ) + (segment + (start 81.2331 106.387) + (end 82.26 105.36) + (width 0.25) + (layer "B.Cu") + (net 8) + (uuid "82145b9e-be81-43ed-8d4c-cd2e1ab3fd4b") + ) + (segment + (start 75.275 92.831) + (end 75.275 91.7401) + (width 0.25) + (layer "B.Cu") + (net 8) + (uuid "85374f5c-03dc-4f1c-8f58-2f107fc1a33c") + ) + (segment + (start 77.18 118.06) + (end 78.0569 118.06) + (width 0.25) + (layer "B.Cu") + (net 8) + (uuid "9d88e646-edf9-45bb-bbb5-cc7967393bf8") + ) + (segment + (start 75.275 91.7401) + (end 83.1799 91.7401) + (width 0.25) + (layer "B.Cu") + (net 8) + (uuid "d7df7ffb-ecb6-4cfa-80e1-3c7a3f2bbb6b") + ) + (segment + (start 87.5788 114.25) + (end 88.4173 113.412) + (width 0.25) + (layer "B.Cu") + (net 8) + (uuid "d7fdcb52-26a4-411b-9067-9dc16e26cf3a") + ) + (segment + (start 81.2331 108.336) + (end 81.2331 106.387) + (width 0.25) + (layer "B.Cu") + (net 8) + (uuid "e1747144-0d21-49d5-ac45-6910079b9df8") + ) + (segment + (start 84.5051 111.608) + (end 81.2331 108.336) + (width 0.25) + (layer "B.Cu") + (net 8) + (uuid "eda48c8b-865b-4453-bb6c-28f1fe4934bd") + ) + (segment + (start 55.8247 114.485) + (end 55.8247 108.935) + (width 0.25) + (layer "F.Cu") + (net 9) + (uuid "3d94bf94-28b3-4501-b4e5-bbbc21f0c949") + ) + (segment + (start 56.86 115.52) + (end 55.8247 114.485) + (width 0.25) + (layer "F.Cu") + (net 9) + (uuid "78c82b5b-d8e9-4a93-8bb4-08ddcecc90ac") + ) + (segment + (start 56.86 120.6) + (end 56.86 115.52) + (width 0.25) + (layer "F.Cu") + (net 9) + (uuid "8bc8fa6f-f48a-4d7e-b848-d901e2c7b02e") + ) + (segment + (start 55.8247 108.935) + (end 56.86 107.9) + (width 0.25) + (layer "F.Cu") + (net 9) + (uuid "8d6d4c9e-08f9-43b5-bb33-9ad274829d64") + ) + (segment + (start 61.94 115.52) + (end 61.94 120.6) + (width 0.25) + (layer "F.Cu") + (net 9) + (uuid "f8152bbb-c6e7-404e-ad64-6339be0b407c") + ) + (segment + (start 56.86 115.52) + (end 61.94 115.52) + (width 0.25) + (layer "B.Cu") + (net 9) + (uuid "09d0e9dc-d1bc-43cc-9c6c-0862846af11f") + ) + (segment + (start 61.94 107.9) + (end 56.86 107.9) + (width 0.25) + (layer "B.Cu") + (net 9) + (uuid "2f01dbc9-351e-4cd9-8350-7b66a53b3ee3") + ) + (segment + (start 67.02 124.803) + (end 66.1431 124.803) + (width 0.25) + (layer "B.Cu") + (net 9) + (uuid "82e8cd85-55c3-47ef-9c76-b8c2ac0db5ae") + ) + (segment + (start 66.1431 124.803) + (end 61.94 120.6) + (width 0.25) + (layer "B.Cu") + (net 9) + (uuid "b3f79d25-bf79-4404-b7e2-192cb54d8962") + ) + (segment + (start 67.02 125.68) + (end 67.02 124.803) + (width 0.25) + (layer "B.Cu") + (net 9) + (uuid "e49e4464-7b1a-47ea-ae3c-56146c0d6e75") + ) + (segment + (start 62.1037 143.619) + (end 63.52 145.036) + (width 0.25) + (layer "F.Cu") + (net 10) + (uuid "0ca72782-37d6-4240-902d-cbcc30ba93f5") + ) + (segment + (start 63.52 145.036) + (end 63.52 146) + (width 0.25) + (layer "F.Cu") + (net 10) + (uuid "34390c90-540c-4185-a10a-d335e2d03290") + ) + (segment + (start 56.86 128.22) + (end 62.1037 133.464) + (width 0.25) + (layer "F.Cu") + (net 10) + (uuid "525f5242-96e3-4301-92db-2e87ab6fca9a") + ) + (segment + (start 56.86 123.14) + (end 56.86 128.22) + (width 0.25) + (layer "F.Cu") + (net 10) + (uuid "602dbfaf-c2bd-4fbe-aefd-0c62402095c1") + ) + (segment + (start 62.1037 133.464) + (end 62.1037 143.619) + (width 0.25) + (layer "F.Cu") + (net 10) + (uuid "e4222a8c-64d3-40a1-bcd8-c54f2a1e1c9a") + ) + (segment + (start 68.0514 99.7983) + (end 68.0514 144.969) + (width 0.25) + (layer "F.Cu") + (net 11) + (uuid "4b384b9a-ace7-414f-85f4-36c871b82c79") + ) + (segment + (start 67.02 97.74) + (end 67.02 98.7669) + (width 0.25) + (layer "F.Cu") + (net 11) + (uuid "98edad9e-9b7d-4306-acd9-bcd21ca6ec8f") + ) + (segment + (start 68.0514 144.969) + (end 67.02 146) + (width 0.25) + (layer "F.Cu") + (net 11) + (uuid "a50917f3-82e3-4232-b42d-13ef12c3d26b") + ) + (segment + (start 67.02 98.7669) + (end 68.0514 99.7983) + (width 0.25) + (layer "F.Cu") + (net 11) + (uuid "c8e59ab2-0126-4ee4-bcb4-f9feb13b6814") + ) + (segment + (start 66.385 96.0781) + (end 66.385 92.831) + (width 0.25) + (layer "B.Cu") + (net 11) + (uuid "2c42c174-72da-4bbb-a82d-72bf4284b146") + ) + (segment + (start 67.02 96.7131) + (end 66.385 96.0781) + (width 0.25) + (layer "B.Cu") + (net 11) + (uuid "93a8ecaa-164f-41e8-9c1d-541a4b1a161d") + ) + (segment + (start 67.02 97.74) + (end 67.02 96.7131) + (width 0.25) + (layer "B.Cu") + (net 11) + (uuid "f2759f14-3b40-4461-975f-25b120ec3674") + ) + (segment + (start 63.52 135.84) + (end 63.52 129.8) + (width 0.25) + (layer "F.Cu") + (net 12) + (uuid "883338c8-980d-4e1d-9d4f-d6f471350e92") + ) + (segment + (start 61.94 128.22) + (end 61.94 123.14) + (width 0.25) + (layer "F.Cu") + (net 12) + (uuid "cd2e08c0-8a72-4ef4-b9a7-37cb0ae7dbb2") + ) + (segment + (start 63.52 129.8) + (end 61.94 128.22) + (width 0.25) + (layer "F.Cu") + (net 12) + (uuid "e731ea8a-6512-4fe7-bfe8-b56cca27c23b") + ) + (segment + (start 55.835 112.555431) + (end 55.835 115.944569) + (width 0.25) + (layer "B.Cu") + (net 13) + (uuid "019172d2-a161-4907-a88f-0d74fa4b4f33") + ) + (segment + (start 53.895431 86.555) + (end 53.295 87.155431) + (width 0.25) + (layer "B.Cu") + (net 13) + (uuid "087a7aba-b84d-4bdb-8168-0d680025f053") + ) + (segment + (start 66.145 125.441379) + (end 66.145 134.965) + (width 0.25) + (layer "B.Cu") + (net 13) + (uuid "0918751e-b6da-4ded-82ac-c0ad868eb521") + ) + (segment + (start 66.145 134.965) + (end 67.02 135.84) + (width 0.25) + (layer "B.Cu") + (net 13) + (uuid "1ab50c31-6968-45d3-88a9-16408896d91e") + ) + (segment + (start 64.48 102.82) + (end 64.48 111.38) + (width 0.25) + (layer "B.Cu") + (net 13) + (uuid "1c421ee7-16f8-4500-a340-69c5b74a1b81") + ) + (segment + (start 53.295 91.635) + (end 64.48 102.82) + (width 0.25) + (layer "B.Cu") + (net 13) + (uuid "248b90af-9dc2-4d47-a05a-fd5972a7e894") + ) + (segment + (start 64.261 86.555) + (end 53.895431 86.555) + (width 0.25) + (layer "B.Cu") + (net 13) + (uuid "30085982-784c-491b-bfe4-3f941ffef640") + ) + (segment + (start 64.48 111.38) + (end 63.905 111.955) + (width 0.25) + (layer "B.Cu") + (net 13) + (uuid "36d95308-5a98-43b6-81c7-519b826e4bea") + ) + (segment + (start 65.115 87.409) + (end 64.261 86.555) + (width 0.25) + (layer "B.Cu") + (net 13) + (uuid "56ce4b67-3f23-43fb-a2e0-0164633a3eea") + ) + (segment + (start 63.905 111.955) + (end 56.435431 111.955) + (width 0.25) + (layer "B.Cu") + (net 13) + (uuid "7ae971d2-7e24-4e76-9d52-322447ccb621") + ) + (segment + (start 56.435431 111.955) + (end 55.835 112.555431) + (width 0.25) + (layer "B.Cu") + (net 13) + (uuid "80b39636-d1f7-497b-b86d-7d7943f999c6") + ) + (segment + (start 62.328621 121.625) + (end 66.145 125.441379) + (width 0.25) + (layer "B.Cu") + (net 13) + (uuid "a8447aed-f282-439c-aeac-7b3f0f091a82") + ) + (segment + (start 53.295 87.155431) + (end 53.295 91.635) + (width 0.25) + (layer "B.Cu") + (net 13) + (uuid "b8f9283e-5dad-4ba5-a4c4-72bb75992980") + ) + (segment + (start 61.515431 121.625) + (end 62.328621 121.625) + (width 0.25) + (layer "B.Cu") + (net 13) + (uuid "c901a1bf-f34e-4e48-a771-eb1c45f5a191") + ) + (segment + (start 66.385 87.409) + (end 65.115 87.409) + (width 0.25) + (layer "B.Cu") + (net 13) + (uuid "f7a7b68b-bfd1-4698-98b7-ddfdcf5a6690") + ) + (segment + (start 55.835 115.944569) + (end 61.515431 121.625) + (width 0.25) + (layer "B.Cu") + (net 13) + (uuid "ffea876b-4655-4a02-a75c-270312f59a0c") + ) + (segment + (start 67.02 106.931) + (end 67.02 110.44) + (width 0.25) + (layer "F.Cu") + (net 14) + (uuid "2910ffe7-604c-4c0c-92f1-d80a476295d5") + ) + (segment + (start 54.32 83.13) + (end 53.69 82.5) + (width 0.25) + (layer "F.Cu") + (net 14) + (uuid "3922cd73-735e-4b43-8249-8f5016ce11a9") + ) + (segment + (start 54.32 87.58) + (end 54.32 83.13) + (width 0.25) + (layer "F.Cu") + (net 14) + (uuid "475ceb0f-2125-4176-a545-b93ccaccc8e8") + ) + (segment + (start 61.94 95.2) + (end 61.94 101.851) + (width 0.25) + (layer "F.Cu") + (net 14) + (uuid "6c0e36f5-45c4-4998-9874-6ae5edd9c3ff") + ) + (segment + (start 61.94 101.851) + (end 67.02 106.931) + (width 0.25) + (layer "F.Cu") + (net 14) + (uuid "7296ec70-977c-49dd-9deb-9bb59ba7a870") + ) + (segment + (start 58.3644 94.7814) + (end 61.4057 91.7401) + (width 0.25) + (layer "B.Cu") + (net 14) + (uuid "09c17a1b-c829-4891-af5d-6b9d4636f772") + ) + (segment + (start 68.925 91.7401) + (end 68.925 92.831) + (width 0.25) + (layer "B.Cu") + (net 14) + (uuid "0c13af30-6978-4c11-9ea3-420ba2531c89") + ) + (segment + (start 61.4057 91.7401) + (end 68.925 91.7401) + (width 0.25) + (layer "B.Cu") + (net 14) + (uuid "22f17e60-7d79-4936-b43a-ff8af616a405") + ) + (segment + (start 61.4057 91.7401) + (end 58.4801 91.7401) + (width 0.25) + (layer "B.Cu") + (net 14) + (uuid "78fed139-5eaf-49fc-9910-d10f12339d29") + ) + (segment + (start 61.94 95.2) + (end 60.9131 95.2) + (width 0.25) + (layer "B.Cu") + (net 14) + (uuid "96f7d759-9760-4750-82ea-297b16461ed8") + ) + (segment + (start 58.3644 95.7155) + (end 58.3644 94.7814) + (width 0.25) + (layer "B.Cu") + (net 14) + (uuid "a45f40d4-b978-47b7-84ce-041919e2732e") + ) + (segment + (start 60.9131 95.2) + (end 59.8674 96.2457) + (width 0.25) + (layer "B.Cu") + (net 14) + (uuid "b65b2349-5006-446b-8e4e-8ef2abbbd3d6") + ) + (segment + (start 59.8674 96.2457) + (end 58.8946 96.2457) + (width 0.25) + (layer "B.Cu") + (net 14) + (uuid "bad9567c-8494-4f2c-a2d8-616e5ae3134c") + ) + (segment + (start 58.8946 96.2457) + (end 58.3644 95.7155) + (width 0.25) + (layer "B.Cu") + (net 14) + (uuid "d0a3cc18-d901-4332-9a9f-251f38b82aa0") + ) + (segment + (start 58.4801 91.7401) + (end 54.32 87.58) + (width 0.25) + (layer "B.Cu") + (net 14) + (uuid "d74b8be1-f3d3-4ae9-9ba4-ab20e1ae50d4") + ) + (segment + (start 67.02 117.183) + (end 66.1431 116.306) + (width 0.25) + (layer "F.Cu") + (net 15) + (uuid "00cabc8d-c100-45fd-a637-c0db99669427") + ) + (segment + (start 59.4 102.82) + (end 59.4 95.2) + (width 0.25) + (layer "F.Cu") + (net 15) + (uuid "14f836c7-f4c6-48a2-a7d3-4e75e85acc7a") + ) + (segment + (start 66.1431 116.306) + (end 66.1431 109.563) + (width 0.25) + (layer "F.Cu") + (net 15) + (uuid "27a5431f-bd2c-4dba-8fce-f7761532ed6a") + ) + (segment + (start 61.94 105.36) + (end 59.4 102.82) + (width 0.25) + (layer "F.Cu") + (net 15) + (uuid "6a77169d-27c3-4a31-9c60-4d382d5f35bd") + ) + (segment + (start 66.1431 109.563) + (end 61.94 105.36) + (width 0.25) + (layer "F.Cu") + (net 15) + (uuid "73cdbe46-1aab-4b3b-a95a-46ee80046098") + ) + (segment + (start 59.4 90.12) + (end 59.4 95.2) + (width 0.25) + (layer "F.Cu") + (net 15) + (uuid "75391f0c-3271-4ec5-aaac-a2a1e343d223") + ) + (segment + (start 59.4 90.12) + (end 60.67 88.85) + (width 0.25) + (layer "F.Cu") + (net 15) + (uuid "7988efa7-b56d-4fb0-8e46-9b1fceee1924") + ) + (segment + (start 60.67 88.85) + (end 60.67 69.8) + (width 0.25) + (layer "F.Cu") + (net 15) + (uuid "b211ee2c-923e-4dc7-934f-102069ae344e") + ) + (segment + (start 67.02 118.06) + (end 67.02 117.183) + (width 0.25) + (layer "F.Cu") + (net 15) + (uuid "c7e90134-c1ca-41d2-9f2b-326e7eb00edf") + ) + (segment + (start 60.6781 93.9219) + (end 59.4 95.2) + (width 0.25) + (layer "B.Cu") + (net 15) + (uuid "5d8a60ec-b607-42fb-bd54-f442e57b58e1") + ) + (segment + (start 65.115 92.831) + (end 65.115 93.9219) + (width 0.25) + (layer "B.Cu") + (net 15) + (uuid "a66f2ae3-4e0d-4e5c-ad5d-28687e29946e") + ) + (segment + (start 65.115 93.9219) + (end 60.6781 93.9219) + (width 0.25) + (layer "B.Cu") + (net 15) + (uuid "b8a0e001-7d95-4223-b6dc-ac505a30a25f") + ) + (segment + (start 77.815 87.409) + (end 77.815 86.97) + (width 0.25) + (layer "B.Cu") + (net 16) + (uuid "6f61321f-33fd-4584-b60f-438f3e1098c6") + ) + (segment + (start 77.815 86.97) + (end 82.285 82.5) + (width 0.25) + (layer "B.Cu") + (net 16) + (uuid "70511cf2-9a14-4198-8286-1bfd3cca3757") + ) + (segment + (start 82.285 82.5) + (end 90.51 82.5) + (width 0.25) + (layer "B.Cu") + (net 16) + (uuid "757574d2-7258-41d3-9a10-fd4dcdcd72a5") + ) + (segment + (start 77.815 70.435) + (end 77.815 87.409) + (width 0.25) + (layer "B.Cu") + (net 16) + (uuid "d51f52a7-f6ce-4e19-b25d-b0c4edc60f48") + ) + (segment + (start 77.18 69.8) + (end 77.815 70.435) + (width 0.25) + (layer "B.Cu") + (net 16) + (uuid "ed9faa35-0ae0-4d09-bc17-fabe2fb2f974") + ) + (segment + (start 77.815 96.712) + (end 80.1524 96.712) + (width 0.25) + (layer "B.Cu") + (net 17) + (uuid "3e5c4264-ebe0-4943-a1e2-ed5cdc893266") + ) + (segment + (start 80.7799 97.3395) + (end 80.7799 100.733) + (width 0.25) + (layer "B.Cu") + (net 17) + (uuid "648291b4-1793-4d0d-8844-5b3e4252de96") + ) + (segment + (start 80.1524 96.712) + (end 80.7799 97.3395) + (width 0.25) + (layer "B.Cu") + (net 17) + (uuid "7b38de57-0ae7-481e-9235-37862d438bee") + ) + (segment + (start 77.815 97.105) + (end 77.18 97.74) + (width 0.25) + (layer "B.Cu") + (net 17) + (uuid "87ca52d1-e702-47fc-bf24-185407e7a018") + ) + (segment + (start 77.815 92.831) + (end 77.815 96.712) + (width 0.25) + (layer "B.Cu") + (net 17) + (uuid "bf93c692-d5e7-42ec-bb4e-a4c87b3c3782") + ) + (segment + (start 77.815 96.712) + (end 77.815 97.105) + (width 0.25) + (layer "B.Cu") + (net 17) + (uuid "c2a0763b-38c3-4b07-9c87-46a3bd0f3d36") + ) + (segment + (start 79.72 101.793) + (end 79.72 102.82) + (width 0.25) + (layer "B.Cu") + (net 17) + (uuid "d7783c50-c985-44d8-b643-48f90045348d") + ) + (segment + (start 80.7799 100.733) + (end 79.72 101.793) + (width 0.25) + (layer "B.Cu") + (net 17) + (uuid "ede63222-c37a-4bfc-8ce8-f8abc11abb36") + ) + (segment + (start 67.02 79.33) + (end 70.19 82.5) + (width 0.25) + (layer "F.Cu") + (net 18) + (uuid "0ef7f7a5-981b-400b-9462-b6f0b63e63e3") + ) + (segment + (start 67.02 69.8) + (end 67.02 79.33) + (width 0.25) + (layer "F.Cu") + (net 18) + (uuid "3a499630-8919-4b2d-bd64-864f3ce3f1ff") + ) + (segment + (start 67.655 85.035) + (end 70.19 82.5) + (width 0.25) + (layer "B.Cu") + (net 18) + (uuid "37146674-8903-4936-a7cf-cbe3a5c8e2b9") + ) + (segment + (start 67.655 87.409) + (end 67.655 85.035) + (width 0.25) + (layer "B.Cu") + (net 18) + (uuid "df5fdc89-21bf-4c12-a936-b5b39fccf22c") + ) + (segment + (start 64.48 99.2531) + (end 64.48 97.74) + (width 0.25) + (layer "F.Cu") + (net 19) + (uuid "05a512b3-b2a0-4588-aa5f-f0e916ade693") + ) + (segment + (start 67.02 101.793) + (end 64.48 99.2531) + (width 0.25) + (layer "F.Cu") + (net 19) + (uuid "59162bae-baf1-41e6-876f-3c170a31c870") + ) + (segment + (start 67.02 102.82) + (end 67.02 101.793) + (width 0.25) + (layer "F.Cu") + (net 19) + (uuid "8ccc9c35-dea0-4b35-a02f-925a9b479e49") + ) + (segment + (start 68.0616 98.1759) + (end 67.4514 98.7861) + (width 0.25) + (layer "B.Cu") + (net 19) + (uuid "39fe054d-90d4-4a40-b218-56599c5f40db") + ) + (segment + (start 67.655 92.831) + (end 67.655 93.9219) + (width 0.25) + (layer "B.Cu") + (net 19) + (uuid "4d85a315-8755-4acd-a8a5-e11dc98c56a8") + ) + (segment + (start 67.655 93.9219) + (end 68.0616 94.3285) + (width 0.25) + (layer "B.Cu") + (net 19) + (uuid "b4e069a2-72f4-4b60-8e22-754acc96e87a") + ) + (segment + (start 68.0616 94.3285) + (end 68.0616 98.1759) + (width 0.25) + (layer "B.Cu") + (net 19) + (uuid "cf2347a4-b616-42dd-82c4-3e8831a95ae1") + ) + (segment + (start 65.5261 98.7861) + (end 64.48 97.74) + (width 0.25) + (layer "B.Cu") + (net 19) + (uuid "dc55bf62-9fd2-4d96-b49a-5377c281e192") + ) + (segment + (start 67.4514 98.7861) + (end 65.5261 98.7861) + (width 0.25) + (layer "B.Cu") + (net 19) + (uuid "e018ca69-42c2-4dd7-a638-951a090e6e08") + ) + (segment + (start 87.34 130.76) + (end 87.34 151.08) + (width 0.25) + (layer "F.Cu") + (net 20) + (uuid "5af7fdc9-f6dc-4736-bf14-91c7c0b2619b") + ) + (segment + (start 87.34 151.08) + (end 82.26 156.16) + (width 0.25) + (layer "F.Cu") + (net 20) + (uuid "9cc93276-0e29-4094-8a03-345dfcbd198f") + ) + (segment + (start 82.26 130.76) + (end 82.26 151.08) + (width 0.25) + (layer "F.Cu") + (net 21) + (uuid "20cef1fc-af0f-4b59-9d11-c24cc50e6dc2") + ) + (segment + (start 82.26 151.08) + (end 77.18 156.16) + (width 0.25) + (layer "F.Cu") + (net 21) + (uuid "df803807-b0c8-4f87-8ba8-e20a8f26b6ef") + ) + (segment + (start 56.86 151.08) + (end 61.94 156.16) + (width 0.25) + (layer "F.Cu") + (net 22) + (uuid "38341714-caa4-4f5a-8229-91df7acc3f58") + ) + (segment + (start 56.86 130.76) + (end 56.86 151.08) + (width 0.25) + (layer "F.Cu") + (net 22) + (uuid "8beb86d4-1bbc-429a-ac58-7a070fe8ff8b") + ) + (segment + (start 64.4844 153.624) + (end 67.02 156.16) + (width 0.25) + (layer "F.Cu") + (net 23) + (uuid "18ef5a20-c8d3-4071-be43-07b7a6fb1c73") + ) + (segment + (start 64.4844 138.542) + (end 64.4844 153.624) + (width 0.25) + (layer "F.Cu") + (net 23) + (uuid "47ef807b-b281-4de9-8565-96981b28e991") + ) + (segment + (start 62.5556 136.613) + (end 64.4844 138.542) + (width 0.25) + (layer "F.Cu") + (net 23) + (uuid "5f13957e-bdbf-4b30-91de-426889aa6dcc") + ) + (segment + (start 61.94 131.787) + (end 62.5556 132.402) + (width 0.25) + (layer "F.Cu") + (net 23) + (uuid "b252279e-62aa-430e-9c8d-2aa3674c6203") + ) + (segment + (start 62.5556 132.402) + (end 62.5556 136.613) + (width 0.25) + (layer "F.Cu") + (net 23) + (uuid "dbe52a5c-087a-4eb5-9e2f-d99eaff09807") + ) + (segment + (start 61.94 130.76) + (end 61.94 131.787) + (width 0.25) + (layer "F.Cu") + (net 23) + (uuid "e9b6b720-aef4-4a33-b698-8530db7a71d0") + ) + (zone + (net 3) + (net_name "GND") + (layer "F.Cu") + (uuid "272d8dfe-425d-4887-ba78-60f7d7d5d920") + (hatch edge 0.5) + (connect_pads + (clearance 0.3) + ) + (min_thickness 0.2) + (filled_areas_thickness no) + (fill + (thermal_gap 0.5) + (thermal_bridge_width 0.5) + ) + (polygon + (pts + (xy 50 63) (xy 94 63) (xy 94 161) (xy 50 161) + ) + ) + ) + (zone + (net 3) + (net_name "GND") + (layer "B.Cu") + (uuid "bd5ddbab-779f-4709-bbad-bd7401c0abfb") + (hatch edge 0.5) + (connect_pads + (clearance 0.3) + ) + (min_thickness 0.2) + (filled_areas_thickness no) + (fill + (thermal_gap 0.5) + (thermal_bridge_width 0.5) + ) + (polygon + (pts + (xy 50 63) (xy 94 63) (xy 94 161) (xy 50 161) + ) + ) + ) + (embedded_fonts no) ) diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/mic_preamp_pcb_prototype_p2.kicad_pcb.before-final-fix-2026-04-23 b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/mic_preamp_pcb_prototype_p2.kicad_pcb.before-final-fix-2026-04-23 new file mode 100644 index 0000000..df1d528 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/mic_preamp_pcb_prototype_p2.kicad_pcb.before-final-fix-2026-04-23 @@ -0,0 +1,10333 @@ +(kicad_pcb + (version 20241229) + (generator "pcbnew") + (generator_version "9.0") + (general + (thickness 1.6) + (legacy_teardrops no) + ) + (paper "A4") + (layers + (0 "F.Cu" signal) + (2 "B.Cu" signal) + (9 "F.Adhes" user "F.Adhesive") + (11 "B.Adhes" user "B.Adhesive") + (13 "F.Paste" user) + (15 "B.Paste" user) + (5 "F.SilkS" user "F.Silkscreen") + (7 "B.SilkS" user "B.Silkscreen") + (1 "F.Mask" user) + (3 "B.Mask" user) + (17 "Dwgs.User" user "User.Drawings") + (19 "Cmts.User" user "User.Comments") + (21 "Eco1.User" user "User.Eco1") + (23 "Eco2.User" user "User.Eco2") + (25 "Edge.Cuts" user) + (27 "Margin" user) + (31 "F.CrtYd" user "F.Courtyard") + (29 "B.CrtYd" user "B.Courtyard") + (35 "F.Fab" user) + (33 "B.Fab" user) + (39 "User.1" user) + (41 "User.2" user) + (43 "User.3" user) + (45 "User.4" user) + (47 "User.5" user) + (49 "User.6" user) + (51 "User.7" user) + (53 "User.8" user) + (55 "User.9" user) + ) + (setup + (stackup + (layer "F.SilkS" + (type "Top Silk Screen") + ) + (layer "F.Paste" + (type "Top Solder Paste") + ) + (layer "F.Mask" + (type "Top Solder Mask") + (thickness 0.01) + ) + (layer "F.Cu" + (type "copper") + (thickness 0.035) + ) + (layer "dielectric 1" + (type "core") + (thickness 1.51) + (material "FR4") + (epsilon_r 4.5) + (loss_tangent 0.02) + ) + (layer "B.Cu" + (type "copper") + (thickness 0.035) + ) + (layer "B.Mask" + (type "Bottom Solder Mask") + (thickness 0.01) + ) + (layer "B.Paste" + (type "Bottom Solder Paste") + ) + (layer "B.SilkS" + (type "Bottom Silk Screen") + ) + (copper_finish "None") + (dielectric_constraints no) + ) + (pad_to_mask_clearance 0) + (allow_soldermask_bridges_in_footprints no) + (tenting front back) + (grid_origin 219.42 67.26) + (pcbplotparams + (layerselection 0x00000000_00000000_55555555_5755f5ff) + (plot_on_all_layers_selection 0x00000000_00000000_00000000_00000000) + (disableapertmacros no) + (usegerberextensions no) + (usegerberattributes yes) + (usegerberadvancedattributes yes) + (creategerberjobfile yes) + (dashed_line_dash_ratio 12.000000) + (dashed_line_gap_ratio 3.000000) + (svgprecision 4) + (plotframeref no) + (mode 1) + (useauxorigin no) + (hpglpennumber 1) + (hpglpenspeed 20) + (hpglpendiameter 15.000000) + (pdf_front_fp_property_popups yes) + (pdf_back_fp_property_popups yes) + (pdf_metadata yes) + (pdf_single_document no) + (dxfpolygonmode yes) + (dxfimperialunits yes) + (dxfusepcbnewfont yes) + (psnegative no) + (psa4output no) + (plot_black_and_white yes) + (sketchpadsonfab no) + (plotpadnumbers no) + (hidednponfab no) + (sketchdnponfab yes) + (crossoutdnponfab yes) + (subtractmaskfromsilk no) + (outputformat 1) + (mirror no) + (drillshape 0) + (scaleselection 1) + (outputdirectory "Gerbers") + ) + ) + (net 0 "") + (net 1 "Net-(D1-K)") + (net 2 "Net-(C3-Pad1)") + (net 3 "GND") + (net 4 "Net-(C3-Pad2)") + (net 5 "Net-(C4-Pad1)") + (net 6 "Net-(C4-Pad2)") + (net 7 "Net-(C5-Pad1)") + (net 8 "Net-(VCC_A2-Pin_1)") + (net 9 "Net-(D2-K)") + (net 10 "Net-(C10-Pad1)") + (net 11 "Net-(C10-Pad2)") + (net 12 "Net-(C11-Pad1)") + (net 13 "Net-(C11-Pad2)") + (net 14 "Net-(C12-Pad1)") + (net 15 "Net-(VCC_B2-Pin_1)") + (net 16 "Net-(SGNL_A1-Pin_1)") + (net 17 "Net-(IC1-Pad6)") + (net 18 "Net-(SGNL_B1-Pin_1)") + (net 19 "Net-(IC2-Pad6)") + (net 20 "Net-(X3A1-Pin_1)") + (net 21 "Net-(X2A1-Pin_1)") + (net 22 "Net-(X3B1-Pin_1)") + (net 23 "Net-(X2B1-Pin_1)") + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "04cdfa84-93d5-4ee1-9040-d0312d749bd6") + (at 59.4 90.12 90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "C13" + (at -0.553201 2.439254 0) + (layer "F.SilkS") + (uuid "e7e3fa75-c2fc-46bd-b988-524e73c7524b") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "0.1uF" + (at 1.27 1.92 90) + (layer "F.Fab") + (hide yes) + (uuid "ce2f5b5c-0c53-4205-ac98-785d789f2ec6") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 90) + (layer "F.Fab") + (hide yes) + (uuid "99a171f8-9625-49fc-a5b8-00ecc1dfe041") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Unpolarized capacitor" + (at 0 0 90) + (layer "F.Fab") + (hide yes) + (uuid "824d88c7-f6c2-4e91-9ae8-997eb47dff0d") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/b34f1ed3-ca84-4b39-accd-7cbb7c08ede6") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "745c8e4d-5da7-4f44-a20b-25864bf10001") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "c0f7a03c-0ad2-4804-b3e1-d1ac01f576fd") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "a9b74ddf-5cee-4a52-a165-56c2b02c46ad") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "e863d924-af2c-44ae-b0a1-73e980de9875") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "eba0052a-3f0c-4850-9d3c-a37d54f8bac2") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "1eae90c6-3259-484a-a33a-023af40e32a2") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "22681448-812a-4abe-abcf-60313ea09da1") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "2e2a2d8e-b46f-4391-8379-816526a0f339") + ) + (pad "1" thru_hole circle + (at 0 0 90) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 15 "Net-(VCC_B2-Pin_1)") + (pintype "passive") + (uuid "b5037d99-8272-4e16-b39b-a2a20234e7f1") + ) + (pad "2" thru_hole oval + (at 2.54 0 90) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 3 "GND") + (pintype "passive") + (uuid "8d847d48-72e1-4c36-9931-8cfb4dfd1ac0") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "06a23103-0375-47b9-9d2d-e1886a061500") + (at 64.48 97.74) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "R16" + (at 0.213146 1.746691 0) + (layer "F.SilkS") + (uuid "1b011455-2b58-4f34-b9d0-ea77e5f68ec2") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "2.2K" + (at 1.27 1.92 0) + (layer "F.Fab") + (hide yes) + (uuid "ef3764f3-5e9f-4c05-88e7-b69168ea8607") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "91bdbace-9809-481b-9084-ca80c88b9e61") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Resistor" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "27fbf73c-8e77-4bb2-a662-26a8af54dfff") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/4dfa4bfd-4e46-43b4-9020-c77e950185e1") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "47428e46-80cf-4a9f-80bc-774e2dd5d84d") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "f7bbf5bd-0860-4583-9c9e-02e22a08a8ca") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "d1435468-f3f3-4c95-9254-edc5fe1e7538") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "9a547cd5-433e-453c-8217-3d6746024354") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "2d3b1bb4-93db-4bf5-ab00-d504ab21e1e5") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "14f2f782-d3d5-457e-9b44-ac104f15b4ed") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "e0df1665-27fd-449f-aca0-82f2114c64b9") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "1ae364a0-6e8b-4707-be25-86ad093f8d15") + ) + (pad "1" thru_hole circle + (at 0 0) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 19 "Net-(IC2-Pad6)") + (pintype "passive") + (uuid "c51b7066-bde8-48bc-b0e5-883836bab8a4") + ) + (pad "2" thru_hole oval + (at 2.54 0) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 11 "Net-(C10-Pad2)") + (pintype "passive") + (uuid "d1473500-173c-4d85-985c-932b6bfdb702") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "MountingHole:MountingHole_2.7mm_M2.5_ISO14580" + (layer "F.Cu") + (uuid "06a73276-4738-419b-bc90-44210544e3fe") + (at 57.495 77.591) + (descr "Mounting Hole 2.7mm, no annular, M2.5, ISO14580") + (tags "mounting hole 2.7mm no annular m2.5 iso14580") + (property "Reference" "H1" + (at 0 -3.25 0) + (layer "F.SilkS") + (hide yes) + (uuid "db699c64-ba8b-4e68-8122-4b315359b5f2") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "M2.5" + (at 0 3.25 0) + (layer "F.Fab") + (hide yes) + (uuid "cfbd51a1-0b26-4952-a8eb-b6f8c7a75f1f") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "fe06deb1-e50b-4713-8866-18a7ce472bb0") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Mounting Hole without connection" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "1b997168-1814-4f06-9b5e-585278a8b8bd") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (sheetfile "StudioMic.kicad_sch") + (attr exclude_from_pos_files) + (fp_circle + (center 0 0) + (end 2.25 0) + (stroke + (width 0.15) + (type solid) + ) + (fill no) + (layer "Cmts.User") + (uuid "86a7048d-682a-4ad8-af23-3a4be441d615") + ) + (fp_circle + (center 0 0) + (end 2.5 0) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + (uuid "e1b489b6-5af7-44d0-b23a-7914f8af8879") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (uuid "f0bc4919-5f99-45ba-a4ae-986c8f04c10a") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "" np_thru_hole oval + (at 0 0) + (size 3.5 2.7) + (drill oval 3.5 2.7) + (layers "*.Cu" "*.Mask") + (thermal_bridge_angle 45) + (uuid "3cc6757b-2ef4-4f86-953d-f8e25ecdb6dc") + ) + (embedded_fonts no) + ) + (footprint "Library:conn_holepad" + (layer "F.Cu") + (uuid "0d7d7047-21e2-4464-b6ae-828a43548935") + (at 72.1 156.16) + (property "Reference" "X1" + (at 0 -0.5 0) + (unlocked yes) + (layer "F.SilkS") + (uuid "7f7ff3c7-87d0-4667-be20-a77440a2a01c") + (effects + (font + (size 1 1) + (thickness 0.1) + ) + ) + ) + (property "Value" "Conn_01x01_Pin" + (at 0 1 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "c5175324-d7b3-48f1-adc1-e4e54a5cd289") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "6112b270-056d-4e39-b09d-ea9f0e61f0f7") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Generic connector, single row, 01x01, script generated" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "3509b8bc-f0b9-40e0-a314-7585e47c60a0") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/cf4c5d8d-0c85-43b3-b2ab-eff2610198e1") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_text user "${REFERENCE}" + (at 0 2.5 0) + (unlocked yes) + (layer "F.Fab") + (uuid "7ed70e4d-fab4-4234-92b1-1e035f55ae07") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" thru_hole circle + (at 0 0) + (size 3 3) + (drill 1.5) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 3 "GND") + (pinfunction "Pin_1") + (pintype "passive") + (uuid "ad89e844-d3c4-47e7-9865-ad19d0aeab33") + ) + (embedded_fonts no) + ) + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "164b3322-14a0-4ba8-9213-866bdfffe114") + (at 87.34 128.22 -90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "R1" + (at 2.891733 -1.937033 180) + (layer "F.SilkS") + (uuid "7016fc18-6df7-4cf0-8145-a161da92d943") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "47" + (at 1.27 1.92 270) + (layer "F.Fab") + (hide yes) + (uuid "e31afb44-10ca-4053-8616-df692abfbf50") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "20846b89-4318-4f16-920b-fbe952d2e2d4") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Resistor" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "00b86c2c-5baf-41ef-b6ce-0893e1b922f8") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/465be87b-5590-4da0-9122-4e5009c124ff") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "e7e0f93e-e037-4307-af8c-630d93f2aa8a") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "8fd70b97-3f7d-4c7e-abe2-00c7ca6df05b") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "1a97f59e-5a9d-4fd5-9bf9-a9d39bedf1cb") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "39517e59-18cd-48a5-bcb7-8bf4d2de6838") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "af0a02c1-a929-4b4e-b125-5da65e8f33ed") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "f43bdfe6-564a-4250-8e73-3c83a173bd64") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "bfdb51a1-8150-408a-bb28-4b074f64ebd1") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "3a6c1c4a-911d-40ad-8a7f-6d0b0329704d") + ) + (pad "1" thru_hole circle + (at 0 0 270) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 2 "Net-(C3-Pad1)") + (pintype "passive") + (uuid "f0f0b9e2-bd1e-4cc8-85f4-83d16144d318") + ) + (pad "2" thru_hole oval + (at 2.54 0 270) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 20 "Net-(X3A1-Pin_1)") + (pintype "passive") + (uuid "cc2e40ce-5b5d-47d5-9c39-cebc9b9d3fd4") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "208db086-01b9-4ed9-8543-986ef572fe92") + (at 77.18 97.74) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "R6" + (at -0.259885 1.754152 0) + (layer "F.SilkS") + (uuid "0aca9955-60e9-44e0-9b6c-0673e92a1bcc") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "2.2K" + (at 1.27 1.92 0) + (layer "F.Fab") + (hide yes) + (uuid "9f35ce26-b6ae-4de0-bbf1-13f812364108") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "0e6a0dfd-1138-4298-b221-9a236b0b4271") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Resistor" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "d8d6aa99-6ccd-4fa4-9a53-66ca1198eba6") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/a10f13f8-a81d-4f2b-b313-a7028981413d") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "2fe2d874-de20-4f50-aafe-96a141e37236") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "873de376-52d5-43c4-a3cf-fa43f1d91a6f") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "7da9831c-3ac5-441e-9859-47efbb9b4b85") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "90c21000-2a25-4b9e-8305-003112da7640") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "3828b049-eab0-4a39-add4-64ff0e3d2fc6") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "c790dc29-510a-44c4-9754-0b53eb2d62ee") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "f4469cae-83d4-4671-b3dc-cb8150bebbad") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "b74a22cd-66c2-4c85-880a-37aa0029f00d") + ) + (pad "1" thru_hole circle + (at 0 0) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 17 "Net-(IC1-Pad6)") + (pintype "passive") + (uuid "da6cefdd-c164-40fc-a51f-ab348ab92b0d") + ) + (pad "2" thru_hole oval + (at 2.54 0) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 4 "Net-(C3-Pad2)") + (pintype "passive") + (uuid "ebbe8870-7fc2-4ceb-a65c-5a2171f4d779") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "215dd88a-87ca-494a-a87e-9f2137eb8bcb") + (at 64.48 102.82) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "R19" + (at 0.233664 1.740277 0) + (layer "F.SilkS") + (uuid "ddc6f61c-6d94-4c10-842f-360fa502ecc1") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "2.2K" + (at 1.27 1.92 0) + (layer "F.Fab") + (hide yes) + (uuid "1a7f7eb1-dc25-43f1-83ad-59d882f47eae") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "18806dda-b5ba-4aa2-9ed5-c68740803ba6") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Resistor" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "70712d6b-d354-44d4-8ea6-c5a62436e0ad") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/6a141024-0740-4682-ac78-fa29ac380bd3") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "badeb390-6d53-466d-aff9-81bbf6da38ad") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "029a0e5e-e7ae-492b-9ff2-574de22461f3") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "ec7c247d-f86f-4a08-91b3-cfc88f4bd7e4") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "2e918e54-78e1-4f97-b913-94819b0bc914") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "88b9d459-fa74-4bd5-bc3f-c86be236b777") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "90b908c0-79fd-40ee-a14a-8228f512fcbb") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "a8c0ac93-33c2-4363-b797-c90d50793cf1") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "d58f5538-ec1a-44e2-8b3e-c6c7cd130711") + ) + (pad "1" thru_hole circle + (at 0 0) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 13 "Net-(C11-Pad2)") + (pintype "passive") + (uuid "172ce72e-ccd7-4e6f-bf49-9c982af2f8a7") + ) + (pad "2" thru_hole oval + (at 2.54 0) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 19 "Net-(IC2-Pad6)") + (pintype "passive") + (uuid "67d6f75c-3cb3-40df-9475-99436f887263") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "C47u35v:CAPPRD200W50D525H1250" + (layer "F.Cu") + (uuid "32127b65-24cd-4624-9ae5-38653049c6fb") + (at 67.02 110.44) + (descr "5*11") + (tags "Capacitor Polarised") + (property "Reference" "C12" + (at 0.961795 3.86902 0) + (layer "F.SilkS") + (uuid "a9957f41-43ff-475f-89a8-e195d0a1f43f") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Value" "47uF 35v" + (at 0 0 0) + (layer "F.SilkS") + (hide yes) + (uuid "e51d3d8e-d78e-45d0-85c2-d3ba4279a56f") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "51a81c25-57d9-4e59-8d0d-8f1b3aac7e99") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Polarized capacitor" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "65639150-8588-40ff-a25e-81d4f84e950b") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/26f9efc1-f18f-46a4-a4e0-fd7b825b179e") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_circle + (center 1 0) + (end 1 2.625) + (stroke + (width 0.2) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "2bb7e679-2791-4f57-9c61-cfc474e0e80f") + ) + (fp_circle + (center 1 0) + (end 1 2.625) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "19d2fcb9-ae5f-425b-bc59-e96493cb05dd") + ) + (pad "1" thru_hole rect + (at 0 0) + (size 1.1 1.1) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 14 "Net-(C12-Pad1)") + (pintype "passive") + (uuid "c725d7fb-d2d8-4859-8e5e-0d3cd4be4321") + ) + (pad "2" thru_hole circle + (at 2 0) + (size 1.1 1.1) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 3 "GND") + (pintype "passive") + (uuid "310bfc25-4982-4fe7-aa75-f08bb0a76949") + ) + (embedded_fonts no) + (model "UVZ1V470MDD1TA.stp" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "C47u63v:CAPPRD350W65D800H1250" + (layer "F.Cu") + (uuid "37069337-d408-4d28-ac1d-b25de44e20ba") + (at 63.52 135.84) + (descr "EEU-EB1J470SJ-1") + (tags "Capacitor Polarised") + (property "Reference" "C11" + (at 1.709261 2.164442 0) + (layer "F.SilkS") + (uuid "efeb1898-966a-4c7b-ac2d-f79e09f509ca") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Value" "47uF 63v" + (at 0 0 0) + (layer "F.SilkS") + (hide yes) + (uuid "c4b08a4f-d1f7-4276-99d8-74f1dea09338") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "a81e3499-7e42-4a29-9a1d-639f7208b476") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Polarized capacitor" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "0f717ee9-9705-4c77-a72d-c1ce408c9391") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/388d7ed8-52d9-442b-b762-60006c60c529") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_circle + (center 1.75 0) + (end 1.75 4) + (stroke + (width 0.2) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "bd041b97-4b7b-4601-a3e6-92cb52905170") + ) + (fp_circle + (center 1.75 0) + (end 1.75 4) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "2a90a626-31fc-44ea-973c-68f14242f186") + ) + (pad "1" thru_hole rect + (at 0 0) + (size 1.275 1.275) + (drill 0.85) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 12 "Net-(C11-Pad1)") + (pintype "passive") + (uuid "a87da594-d52e-48a4-9306-98eccacfff4f") + ) + (pad "2" thru_hole circle + (at 3.5 0) + (size 1.275 1.275) + (drill 0.85) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 13 "Net-(C11-Pad2)") + (pintype "passive") + (uuid "e2005726-d1f9-4de6-a5ac-fea150879263") + ) + (embedded_fonts no) + (model "EEU-EB1J470SJ.stp" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "3edb5673-b873-4087-ac88-b8b0ecba1c97") + (at 61.94 120.6 -90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "R14" + (at 2.965707 -2.432316 0) + (layer "F.SilkS") + (uuid "2bbcab44-528c-4516-b9a6-48c027d9a8ec") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "2.2K" + (at 1.27 1.92 90) + (layer "F.Fab") + (hide yes) + (uuid "8d796ea7-ed94-4592-8a98-dd6460c51c59") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "6e1005d0-ed84-4d43-8ec8-59b7740e9b46") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Resistor" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "ef829e0e-20d8-4d16-95ea-573e2bef7238") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/22c624a2-9c69-4937-8b4e-0e03aaaaa038") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "3b102618-2d75-4f74-b80d-3a5c015423b2") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "079cee2c-a811-4792-b517-17f45a894a3d") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "d27eae09-ea9e-442f-8117-e72b36a13ed9") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "5e4844c5-86c5-438f-8c69-462750e00b78") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "491cdf89-6ee8-42c3-8c68-9bc522986db6") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "65a2bd31-6e08-4daf-b2a8-926623b9f20f") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "264d4c99-5502-4860-8c6b-357e5045764d") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "a0cbd4b8-6f2f-497a-89c6-30f41cc9e073") + ) + (pad "1" thru_hole circle + (at 0 0 270) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 9 "Net-(D2-K)") + (pintype "passive") + (uuid "1c7dc787-e6e2-4ec7-aef7-b2c6000765ae") + ) + (pad "2" thru_hole oval + (at 2.54 0 270) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 12 "Net-(C11-Pad1)") + (pintype "passive") + (uuid "4a9a71a1-6087-485e-9dc3-e78a801a3398") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "C47u35v:CAPPRD200W50D525H1250" + (layer "F.Cu") + (uuid "50645cf4-8007-4d77-8b63-fabebd482d62") + (at 67.02 125.68 -90) + (descr "5*11") + (tags "Capacitor Polarised") + (property "Reference" "C9" + (at 4.880074 -0.70564 0) + (layer "F.SilkS") + (uuid "2f9ed1ec-bcd5-45c0-bc46-ad72b6dad5fd") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Value" "47uF 35v" + (at 0 0 90) + (layer "F.SilkS") + (hide yes) + (uuid "b9bbc8b6-bb07-4c49-bb9e-eab0a2a1f3d2") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "0063325f-82f1-4873-9925-6eedddd57e15") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Polarized capacitor" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "3b494395-b991-47f2-8b63-205cb200aeb3") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/d1189f40-af74-4922-94ba-fe238cf5f19c") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_circle + (center 1 0) + (end 1 2.625) + (stroke + (width 0.2) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "6d3a5cb2-9489-47a6-ab4b-8dc365dfe226") + ) + (fp_circle + (center 1 0) + (end 1 2.625) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "60b9f829-6311-43f3-8287-1f07964f8e58") + ) + (pad "1" thru_hole rect + (at 0 0 270) + (size 1.1 1.1) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 9 "Net-(D2-K)") + (pintype "passive") + (uuid "7814e902-3d2d-49e5-b4f5-82be6ebcebcf") + ) + (pad "2" thru_hole circle + (at 2 0 270) + (size 1.1 1.1) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 3 "GND") + (pintype "passive") + (uuid "890ff405-654c-4d9f-93c2-0580d00c0ea5") + ) + (embedded_fonts no) + (model "UVZ1V470MDD1TA.stp" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "R1Go:RESAD1650W70L650D250" + (layer "F.Cu") + (uuid "5104b3e0-c4fe-42eb-b101-ccee056fc4c4") + (at 53.69 82.5) + (descr "RGP0207CHK1G0") + (tags "Resistor") + (property "Reference" "R20" + (at 0.63 2.54 0) + (layer "F.SilkS") + (uuid "8746d88e-59dc-4699-a145-8bad2f20e0fa") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Value" "1G" + (at 0 0 0) + (layer "F.SilkS") + (hide yes) + (uuid "a6e656f8-7716-4972-9d0a-6918430baeba") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "033966f3-3e6f-42cb-846c-8a331518d361") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Resistor" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "39938887-036e-486d-9e69-acef345b4f2e") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/621df7af-eee1-4ba7-b334-c8f75f6a97e7") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 1.025 0) + (end 5 0) + (stroke + (width 0.2) + (type solid) + ) + (layer "F.SilkS") + (uuid "378094dc-27db-4b38-a5ba-28d82dfc0369") + ) + (fp_line + (start 5 -1.25) + (end 11.5 -1.25) + (stroke + (width 0.2) + (type solid) + ) + (layer "F.SilkS") + (uuid "a7748322-8c5f-46cf-bd37-2fb01db21bc6") + ) + (fp_line + (start 5 1.25) + (end 5 -1.25) + (stroke + (width 0.2) + (type solid) + ) + (layer "F.SilkS") + (uuid "e286f56c-b764-4fd8-947f-4c9064d1f136") + ) + (fp_line + (start 11.5 -1.25) + (end 11.5 1.25) + (stroke + (width 0.2) + (type solid) + ) + (layer "F.SilkS") + (uuid "203edae9-b058-41e0-b169-692f5c9b4aca") + ) + (fp_line + (start 11.5 0) + (end 15.475 0) + (stroke + (width 0.2) + (type solid) + ) + (layer "F.SilkS") + (uuid "1e7d0371-3bb0-4b3c-a1e8-f3f81afd40de") + ) + (fp_line + (start 11.5 1.25) + (end 5 1.25) + (stroke + (width 0.2) + (type solid) + ) + (layer "F.SilkS") + (uuid "30941456-c4ee-4b5e-b2a0-dba0876787fb") + ) + (fp_line + (start -0.925 -1.6) + (end 17.425 -1.6) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "19e24384-4dc9-40f5-8b69-52afb8de8277") + ) + (fp_line + (start -0.925 1.6) + (end -0.925 -1.6) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "7921c54e-03fb-4873-a717-2904fdbc97cb") + ) + (fp_line + (start 17.425 -1.6) + (end 17.425 1.6) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "ff470143-b351-4dfe-866b-679817ca38bf") + ) + (fp_line + (start 17.425 1.6) + (end -0.925 1.6) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "9e8c624d-a666-4c46-aa6e-6d4117680901") + ) + (fp_line + (start 0 0) + (end 5 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "c9f22a6b-a010-4287-b248-6f1073552a37") + ) + (fp_line + (start 5 -1.25) + (end 11.5 -1.25) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "da0902d6-d4e7-4c5d-bd67-265ab1567f54") + ) + (fp_line + (start 5 1.25) + (end 5 -1.25) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "1eeb6b7e-98df-4357-86ac-9b6e40ecf6b6") + ) + (fp_line + (start 11.5 -1.25) + (end 11.5 1.25) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "884f6c53-b78a-49f4-82af-2883729a7adc") + ) + (fp_line + (start 11.5 0) + (end 16.5 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "7ddb31ac-1194-4c0c-90da-e6b149bfa01c") + ) + (fp_line + (start 11.5 1.25) + (end 5 1.25) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "e241adbb-49a6-4f7e-8e6b-fa858c0f5cff") + ) + (fp_text user "${REFERENCE}" + (at 0.63 2.54 0) + (layer "F.Fab") + (uuid "74ea7ca2-74ae-44c5-9190-0627748c8b38") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (pad "1" thru_hole circle + (at 0 0) + (size 1.35 1.35) + (drill 0.9) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 14 "Net-(C12-Pad1)") + (pintype "passive") + (uuid "9158f69c-9a15-4931-8b93-4d1366aea86c") + ) + (pad "2" thru_hole circle + (at 16.5 0) + (size 1.35 1.35) + (drill 0.9) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 18 "Net-(SGNL_B1-Pin_1)") + (pintype "passive") + (uuid "a3912331-601a-47cb-ac46-8d8144f6a5d9") + ) + (embedded_fonts no) + (model "RGP0207CHK1G0.stp" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "R1Go:RESAD1650W70L650D250" + (layer "F.Cu") + (uuid "511ee32a-67bc-40fe-a005-09ae35c9667b") + (at 74.01 82.5) + (descr "RGP0207CHK1G0") + (tags "Resistor") + (property "Reference" "R10" + (at 0.63 2.54 0) + (layer "F.SilkS") + (uuid "c5c81eb8-6711-43b2-acad-eaf5c7b879c4") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Value" "1G" + (at 0 0 0) + (layer "F.SilkS") + (hide yes) + (uuid "f086b580-57d9-468f-aec6-1963fefd2be1") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "e8cdc9f7-eb39-4e7f-ae8b-6a218d1fcfba") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Resistor" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "384838fb-6b63-46b7-8d2c-5521db75255c") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/a3724ff5-8cb6-46d0-b421-63da8a253dc7") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 1.025 0) + (end 5 0) + (stroke + (width 0.2) + (type solid) + ) + (layer "F.SilkS") + (uuid "7974632e-a7fd-4dc4-9022-ae21568dfdab") + ) + (fp_line + (start 5 -1.25) + (end 11.5 -1.25) + (stroke + (width 0.2) + (type solid) + ) + (layer "F.SilkS") + (uuid "a44bb3d9-77ad-4599-8e80-ffc9ced10332") + ) + (fp_line + (start 5 1.25) + (end 5 -1.25) + (stroke + (width 0.2) + (type solid) + ) + (layer "F.SilkS") + (uuid "32b03cd3-00fb-43a8-855c-2e5ad844592a") + ) + (fp_line + (start 11.5 -1.25) + (end 11.5 1.25) + (stroke + (width 0.2) + (type solid) + ) + (layer "F.SilkS") + (uuid "a6c1952d-ad17-424d-a8c5-4df6ea8c9b9b") + ) + (fp_line + (start 11.5 0) + (end 15.475 0) + (stroke + (width 0.2) + (type solid) + ) + (layer "F.SilkS") + (uuid "82205807-5925-4f22-96ef-e7caca865b65") + ) + (fp_line + (start 11.5 1.25) + (end 5 1.25) + (stroke + (width 0.2) + (type solid) + ) + (layer "F.SilkS") + (uuid "86954dfc-743d-4881-bd42-406c34e21c4f") + ) + (fp_line + (start -0.925 -1.6) + (end 17.425 -1.6) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "d3fd7d17-fe9e-4786-956c-d9870573d16c") + ) + (fp_line + (start -0.925 1.6) + (end -0.925 -1.6) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "37224075-86d9-47bc-bb9e-f92cfa8ef84d") + ) + (fp_line + (start 17.425 -1.6) + (end 17.425 1.6) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "24c753d4-741a-4583-bd3a-0ee3208172f5") + ) + (fp_line + (start 17.425 1.6) + (end -0.925 1.6) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "29087955-a82b-41e7-995f-f2a0581adb29") + ) + (fp_line + (start 0 0) + (end 5 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "2b4d77e4-d8a8-4c5e-8348-2e3891df195a") + ) + (fp_line + (start 5 -1.25) + (end 11.5 -1.25) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "480e923f-3c25-45d7-944a-0b387355e824") + ) + (fp_line + (start 5 1.25) + (end 5 -1.25) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "6c18156c-8a98-4a5a-ab8f-771fbaa32118") + ) + (fp_line + (start 11.5 -1.25) + (end 11.5 1.25) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "bdfcedcd-4d2c-40b2-a92d-35551a10a6af") + ) + (fp_line + (start 11.5 0) + (end 16.5 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "e5ce0a63-afee-4f28-94fd-12186d2e3684") + ) + (fp_line + (start 11.5 1.25) + (end 5 1.25) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "f87dc0cb-5eeb-4b58-94b8-3792883479d8") + ) + (fp_text user "${REFERENCE}" + (at 0.63 2.54 0) + (layer "F.Fab") + (uuid "ed575cdb-9053-46a4-9d34-fada42a46b08") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (pad "1" thru_hole circle + (at 0 0) + (size 1.35 1.35) + (drill 0.9) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 7 "Net-(C5-Pad1)") + (pintype "passive") + (uuid "5a6c052a-d6ea-460b-984d-29426d71e7ea") + ) + (pad "2" thru_hole circle + (at 16.5 0) + (size 1.35 1.35) + (drill 0.9) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 16 "Net-(SGNL_A1-Pin_1)") + (pintype "passive") + (uuid "1fecd301-41d2-4f17-8241-372746319e52") + ) + (embedded_fonts no) + (model "RGP0207CHK1G0.stp" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "C47u63v:CAPPRD350W65D800H1250" + (layer "F.Cu") + (uuid "57f1cd55-3f2c-438f-b4c2-4f5d150ecffc") + (at 77.18 135.84) + (descr "EEU-EB1J470SJ-1") + (tags "Capacitor Polarised") + (property "Reference" "C4" + (at 1.91582 2.097292 0) + (layer "F.SilkS") + (uuid "82096ada-3ded-44cf-bd75-8959c327a174") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Value" "47uF 63v" + (at 0 0 0) + (layer "F.SilkS") + (hide yes) + (uuid "5ad46f85-f25b-4bd1-82ed-795913f1666d") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "01259666-2de3-45de-9934-4bc5af33e538") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Polarized capacitor" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "19240d3e-b7f9-4ae4-9f9d-018cd3fbc5dd") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/225d2ae8-3230-4005-a4b4-2094ff960f52") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_circle + (center 1.75 0) + (end 1.75 4) + (stroke + (width 0.2) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "d4102372-978f-42a1-a90d-41d236206e20") + ) + (fp_circle + (center 1.75 0) + (end 1.75 4) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "7787f7ca-8876-47c6-bb05-6c14aebedc41") + ) + (pad "1" thru_hole rect + (at 0 0) + (size 1.275 1.275) + (drill 0.85) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 5 "Net-(C4-Pad1)") + (pintype "passive") + (uuid "a6779f9f-6a23-40bc-961e-0b8261bdce78") + ) + (pad "2" thru_hole circle + (at 3.5 0) + (size 1.275 1.275) + (drill 0.85) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 6 "Net-(C4-Pad2)") + (pintype "passive") + (uuid "7f2ab19a-976a-456a-8fad-601874d85423") + ) + (embedded_fonts no) + (model "EEU-EB1J470SJ.stp" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Library:conn_holepad" + (layer "F.Cu") + (uuid "5e40555e-2a89-4573-9a30-23f8a46b86ad") + (at 61.94 156.16) + (property "Reference" "X3B1" + (at 0.016458 2.494589 0) + (unlocked yes) + (layer "F.SilkS") + (uuid "30a5f286-250d-4a3c-9f3a-4f3ed4a1e0fa") + (effects + (font + (size 1 1) + (thickness 0.1) + ) + ) + ) + (property "Value" "Conn_01x01_Pin" + (at 0 1 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "b6432240-0ae5-4008-b659-2d7da56c7894") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "f4b1bbf4-7453-4efc-9ae2-791c6dd65202") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Generic connector, single row, 01x01, script generated" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "18d200ec-8a1b-4f8a-b6dd-97c2395b3c52") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/cb6e0e92-8106-4918-9d8c-3e3013d6e7e1") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_text user "${REFERENCE}" + (at 0 2.5 0) + (unlocked yes) + (layer "F.Fab") + (uuid "99f21f5f-21c1-4ef8-a0c8-a5a1b720aba9") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" thru_hole circle + (at 0 0) + (size 3 3) + (drill 1.5) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 22 "Net-(X3B1-Pin_1)") + (pinfunction "Pin_1") + (pintype "passive") + (uuid "abdbdf51-9f1a-417f-a17c-6991518f0831") + ) + (embedded_fonts no) + ) + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "6a95d45f-4519-4910-bd01-b4336f829f93") + (at 61.94 128.22 -90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "R12" + (at 2.915049 -2.449104 180) + (layer "F.SilkS") + (uuid "95885942-92e5-4336-add5-a2ba35600eff") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "47" + (at 1.27 1.92 270) + (layer "F.Fab") + (hide yes) + (uuid "7556e769-713c-42b0-8e52-81caf6b8a4ed") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "e8591d5e-9b96-42c9-bef5-d7dfb39311b6") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Resistor" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "18f93c2b-5214-4bc0-83bb-dac192af2e41") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/9a83ce8c-c4ea-4707-8978-a44f631e4fc0") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "88f7a153-3c40-4d8d-8e04-42edb8032c01") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "ad112007-8408-4e1d-a96b-c679b440039a") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "ac8679ee-a570-4285-beaf-41b481358ff8") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "f2727568-393a-4706-9c58-a6867848526d") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "4381bf1e-59cb-4e33-8f51-6396028cb0ab") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "cd2728a6-cbf9-4086-93a2-472dd5bec58e") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "814bee79-5ee9-491c-b583-6ba5c17fdf16") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "316744c1-0e96-4874-b09f-28721d28a9c5") + ) + (pad "1" thru_hole circle + (at 0 0 270) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 12 "Net-(C11-Pad1)") + (pintype "passive") + (uuid "cb6ccae2-58ed-4069-aacb-cc35c7c95063") + ) + (pad "2" thru_hole oval + (at 2.54 0 270) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 23 "Net-(X2B1-Pin_1)") + (pintype "passive") + (uuid "b0c91d99-9800-421c-83ad-05b0c7bcde76") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "70727d25-e90e-4f97-a2c4-19ef1c2db17a") + (at 82.26 95.2) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "R8" + (at -0.258837 1.734976 0) + (layer "F.SilkS") + (uuid "3e611c63-801e-46e9-86f7-ddc50e28500a") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "47K" + (at 1.27 1.92 0) + (layer "F.Fab") + (hide yes) + (uuid "8ab7a06b-c99d-4344-948a-c34e639a1293") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "e8c82127-8e15-4cb9-b6a6-9806aed42ecb") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Resistor" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "ff163064-c9d5-4ce0-8649-fa1a92b85da5") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/6bc81894-9db7-4be7-a876-2de954b2e8d4") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "72332f31-d254-4b7d-bb98-67a3ecf53cd0") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "dbb33cd9-018e-4d7b-ae36-e97d83a18f0b") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "5bfa8fa6-e47f-429e-9267-97501f54c005") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "e63217f6-e95c-4d83-9128-5fe2bf0307fe") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "26fd6a13-7c19-4e62-a717-28d9800c7e52") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "59cdf935-d918-4629-9a24-844a65b45ce3") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "75949e46-71ae-42a3-bdbf-6acf6818cd0a") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "d3e61387-093f-4be7-b181-0b4c0a3edeb9") + ) + (pad "1" thru_hole circle + (at 0 0) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 8 "Net-(VCC_A2-Pin_1)") + (pintype "passive") + (uuid "f7a268ac-3442-4517-a027-1ae5bc623840") + ) + (pad "2" thru_hole oval + (at 2.54 0) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 7 "Net-(C5-Pad1)") + (pintype "passive") + (uuid "15440508-6b49-427a-94cd-13d5773a99f4") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "745fa253-fc6b-4da8-b153-6b4fca625b32") + (at 82.26 128.22 -90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "R2" + (at 2.958884 -1.980753 180) + (layer "F.SilkS") + (uuid "a517cc3f-6e9e-4271-a99a-07a6f04e0cdb") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "47" + (at 1.27 1.92 270) + (layer "F.Fab") + (hide yes) + (uuid "2daa1a04-b9c4-46f5-af0b-171fd3490c07") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "5e8f0bcc-2c52-44d7-8292-51a08060c83e") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Resistor" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "152e506d-81a9-407f-bb66-e3f68ca0d258") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/e7bc09ca-c05b-46b5-a6ac-36183d8d76a3") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "c3741035-4127-46ee-b322-d339618cd69f") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "e3823e06-9efd-4f4e-8ee5-47273c5b42e1") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "21cbafd0-bc53-4dab-acba-c038266db131") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "34f5eceb-df9b-434b-a7f0-4b41a05c335c") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "79c9ebfb-7e18-4f6d-8309-5deb5e77e1e2") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "49ffcd0c-9ae3-42bd-a1ea-1e54a66a97fd") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "6d6641b2-49aa-4349-ba42-f60171ef5ef6") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "afa9d047-e99c-4bc6-b3b5-01d5d442aba0") + ) + (pad "1" thru_hole circle + (at 0 0 270) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 5 "Net-(C4-Pad1)") + (pintype "passive") + (uuid "e1b10bd0-8cab-4414-aaf4-14cf087e9d4e") + ) + (pad "2" thru_hole oval + (at 2.54 0 270) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 21 "Net-(X2A1-Pin_1)") + (pintype "passive") + (uuid "e6729b8e-23fe-4d05-9615-7ca7671bf626") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "7472e516-6d6f-42aa-aff0-409e97b9c722") + (at 82.26 115.52 90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "D1" + (at -0.564033 2.014328 0) + (layer "F.SilkS") + (uuid "ffd6cd47-439a-4bbe-9753-dd65d13040da") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "12V" + (at 1.27 1.92 90) + (layer "F.Fab") + (hide yes) + (uuid "752cf63f-5d23-4dc4-817a-a293d9be6234") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 90) + (layer "F.Fab") + (hide yes) + (uuid "f5a3ce67-854c-4f38-921f-c306a3c363eb") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Diode" + (at 0 0 90) + (layer "F.Fab") + (hide yes) + (uuid "8c224d7c-c61e-4caa-b24f-348d9fd0569a") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Sim.Device" "D" + (at 197.78 33.26 0) + (layer "F.Fab") + (hide yes) + (uuid "5a1f9017-d692-42d7-b6d1-b99d6e00667e") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Sim.Pins" "1=K 2=A" + (at 197.78 33.26 0) + (layer "F.Fab") + (hide yes) + (uuid "e594021b-69db-4df1-8358-ac2a00e07d21") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (path "/04786958-d145-4302-af4f-030967ac2a8a") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "0224cf19-064c-494b-82b4-98171a22933e") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "993e43d6-d0ab-428f-85bc-ae5bcf149a49") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "46cac06e-fab6-4272-9732-bfad65d29f81") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "abb9a96d-08a8-46e6-a1f1-b0846347ca6a") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "b1c35bab-a00e-4782-a36b-79e79e988f5d") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "92183174-45ed-4b2a-b139-5ac7bf3b7546") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "2919f9e8-6ec9-4b2a-ba3a-c916e973035b") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "eb481af8-d85c-4ce6-a652-43b00abdcc39") + ) + (pad "1" thru_hole circle + (at 0 0 90) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 1 "Net-(D1-K)") + (pinfunction "K") + (pintype "passive") + (uuid "4588228a-a974-4b52-afde-3bd24b303adf") + ) + (pad "2" thru_hole oval + (at 2.54 0 90) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 3 "GND") + (pinfunction "A") + (pintype "passive") + (uuid "73e20179-02ea-4a65-9a4f-0a706a4c9c9d") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "C.022uF50v:K223K15X7RF5UL2" + (layer "F.Cu") + (uuid "777a2a11-51b6-4ba0-a284-b026e2b2353a") + (at 84.8 90.12 90) + (descr "K223K15X7RF5UL2-1") + (tags "Capacitor") + (property "Reference" "C6" + (at -2.218904 -0.082977 180) + (layer "F.SilkS") + (uuid "a4f65e3a-dbd2-44a3-b1c5-9975be850695") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Value" "0.1uF" + (at 1.25 0 90) + (layer "F.SilkS") + (hide yes) + (uuid "f867c9ac-9208-4dae-b13e-f7a83fbe91a4") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 90) + (layer "F.Fab") + (hide yes) + (uuid "0c8bf523-6517-4708-bff6-f22ab2e9bf66") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Unpolarized capacitor" + (at 0 0 90) + (layer "F.Fab") + (hide yes) + (uuid "16a5054a-691a-40b7-9b81-d4371e0048d4") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/57c290cf-4a3a-4689-a5cc-79dd666271df") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 3.25 -1.3) + (end 3.25 -1) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.SilkS") + (uuid "a475d7c7-8820-4801-af00-0fcbcca38990") + ) + (fp_line + (start -0.75 -1.3) + (end 3.25 -1.3) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.SilkS") + (uuid "d40b2379-d455-462c-a1b7-0a8450946868") + ) + (fp_line + (start -0.75 -1) + (end -0.75 -1.3) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.SilkS") + (uuid "0d4bd84a-5607-45fb-87fb-139520d7a0f1") + ) + (fp_line + (start -0.75 1) + (end -0.75 1.3) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.SilkS") + (uuid "bcbb11f6-f2b2-494c-8850-cf4b4f829176") + ) + (fp_line + (start 3.25 1.3) + (end 3.25 1) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.SilkS") + (uuid "59319f7d-fe92-451d-990d-363cbca24416") + ) + (fp_line + (start -0.75 1.3) + (end 3.25 1.3) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.SilkS") + (uuid "6b001352-3195-4298-baa5-3df16eb94116") + ) + (fp_line + (start 3.75 -1.8) + (end 3.75 1.8) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.CrtYd") + (uuid "c851eff6-5ab5-4129-a309-bbf8c82d7558") + ) + (fp_line + (start -1.25 -1.8) + (end 3.75 -1.8) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.CrtYd") + (uuid "7baec531-e6a6-458b-a317-1988ff17822e") + ) + (fp_line + (start 3.75 1.8) + (end -1.25 1.8) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.CrtYd") + (uuid "86f516d8-4335-491f-b766-a3db1be23d8b") + ) + (fp_line + (start -1.25 1.8) + (end -1.25 -1.8) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.CrtYd") + (uuid "aac5680b-f51b-4db4-b343-1bd513dfea4f") + ) + (fp_line + (start 3.25 -1.3) + (end 3.25 1.3) + (stroke + (width 0.2) + (type solid) + ) + (layer "F.Fab") + (uuid "83838809-c2f3-4cb0-8c78-517af44e787b") + ) + (fp_line + (start -0.75 -1.3) + (end 3.25 -1.3) + (stroke + (width 0.2) + (type solid) + ) + (layer "F.Fab") + (uuid "011e2610-78b5-4cab-96d7-0f99d08a59fa") + ) + (fp_line + (start 3.25 1.3) + (end -0.75 1.3) + (stroke + (width 0.2) + (type solid) + ) + (layer "F.Fab") + (uuid "c1a01b22-728e-46d6-96ef-30e776faf4fa") + ) + (fp_line + (start -0.75 1.3) + (end -0.75 -1.3) + (stroke + (width 0.2) + (type solid) + ) + (layer "F.Fab") + (uuid "db2af17f-2eb4-4f2b-b59e-eb5c8504eb43") + ) + (pad "1" thru_hole circle + (at 0 0 90) + (size 1.2 1.2) + (drill 0.75) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 8 "Net-(VCC_A2-Pin_1)") + (pintype "passive") + (uuid "d2fa98eb-94f3-4395-b54d-d4291f80c27f") + ) + (pad "2" thru_hole circle + (at 2.5 0 90) + (size 1.2 1.2) + (drill 0.75) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 3 "GND") + (pintype "passive") + (uuid "448d6ed4-1c1f-4bea-a65e-151ed27dfe57") + ) + (embedded_fonts no) + (model "K223K15X7RF5UL2.stp" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "MountingHole:MountingHole_2.7mm_M2.5_ISO14580" + (layer "F.Cu") + (uuid "7f03512d-5430-4f6b-989a-c57dddec5941") + (at 86.495 77.591) + (descr "Mounting Hole 2.7mm, no annular, M2.5, ISO14580") + (tags "mounting hole 2.7mm no annular m2.5 iso14580") + (property "Reference" "H2" + (at 0 -3.25 0) + (layer "F.SilkS") + (hide yes) + (uuid "8c84fe77-0de7-4088-a65e-4dddda1e9add") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "M2.5" + (at 0 3.25 0) + (layer "F.Fab") + (hide yes) + (uuid "8fc6e3fc-39d3-4a90-920b-1879c4c60efe") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "e9396dda-cbac-45a2-9dcb-cd09675e02f1") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Mounting Hole without connection" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "9e9f731d-18dc-475f-abe2-9857ca1d4272") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (sheetfile "StudioMic.kicad_sch") + (attr exclude_from_pos_files) + (fp_circle + (center 0 0) + (end 2.25 0) + (stroke + (width 0.15) + (type solid) + ) + (fill no) + (layer "Cmts.User") + (uuid "3d8ade6d-3490-4a27-8a42-8c4f9b2b216b") + ) + (fp_circle + (center 0 0) + (end 2.5 0) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + (uuid "d740fdd3-3381-4e68-abba-3550b800a4b9") + ) + (fp_text user "${REFERENCE}" + (at 0 0 0) + (layer "F.Fab") + (uuid "88414f96-11bc-4b42-a55b-9c68a12fe7d3") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "" np_thru_hole oval + (at 0 0) + (size 3.5 2.7) + (drill oval 3.5 2.7) + (layers "*.Cu" "*.Mask") + (uuid "d10210f0-ec59-438e-a0e2-3e35204b58ab") + ) + (embedded_fonts no) + ) + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "8222916a-afda-4ca0-9014-a8d49bfd5eca") + (at 77.18 102.82) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "R9" + (at -0.269833 1.725355 0) + (layer "F.SilkS") + (uuid "fe03fcd1-3a46-4641-b4a4-6271a9c4a05c") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "2.2K" + (at 1.27 1.92 0) + (layer "F.Fab") + (hide yes) + (uuid "3d136940-b473-4bb7-b7fc-a37a3d1f627d") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "df917154-3873-4794-b7fb-d489d0b60eae") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Resistor" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "af81fb55-e4a7-42b9-9cd8-38d437659e87") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/333c6bef-4cf7-4319-b480-a4d554049f1a") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "90ef6fdf-2801-46ca-ad22-7ac678cd6738") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "8c0e6bf2-9834-4387-9f20-62f75692ddea") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "5349220a-ce3f-4604-835f-2e97f62acc5d") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "ba228c7b-fd34-408a-8a2b-4a1c916b760e") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "ae8ab25a-71ea-40a8-a5f6-02d2dd7f0a61") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "63f24955-dcd9-4332-a2a3-07f1e5914fcf") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "d8c4b57b-464b-4294-82a2-41d2f3cd66d9") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "cc1ebe5c-f4c9-4b70-83eb-e60fb874dc79") + ) + (pad "1" thru_hole circle + (at 0 0) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 6 "Net-(C4-Pad2)") + (pintype "passive") + (uuid "c150de42-16be-4fdc-853c-5f7149aceb59") + ) + (pad "2" thru_hole oval + (at 2.54 0) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 17 "Net-(IC1-Pad6)") + (pintype "passive") + (uuid "a513bcd0-e8d2-493e-889c-f7069e4a27f5") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "87039480-541e-4ba1-8b4c-becebf7d9ca0") + (at 56.86 115.52 90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "D2" + (at -0.591079 1.95189 0) + (layer "F.SilkS") + (uuid "1235d70f-2098-481f-ab42-9da8c8985f0e") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "12V" + (at 1.27 1.92 90) + (layer "F.Fab") + (hide yes) + (uuid "dc161806-2a08-47ac-aa0b-6d28839e8d72") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 90) + (layer "F.Fab") + (hide yes) + (uuid "5a210988-93f9-4e47-8b69-04e306120415") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Diode" + (at 0 0 90) + (layer "F.Fab") + (hide yes) + (uuid "1adbc3ef-302f-4a7a-952f-3d03ceedbca8") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Sim.Device" "D" + (at 172.38 58.66 0) + (layer "F.Fab") + (hide yes) + (uuid "cfda58be-341a-4bbc-9e10-9584ddd01fcc") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Sim.Pins" "1=K 2=A" + (at 172.38 58.66 0) + (layer "F.Fab") + (hide yes) + (uuid "8711ddee-ed0c-4807-8d13-7166e9b55ab1") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (path "/60bb60f7-d540-494b-9a5e-5a737fa70d44") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "0a57cbbb-36e7-49f4-8388-e321f682968c") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "b8e79ce5-adc7-42e7-8264-18dfda5ab300") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "206ed511-f19b-4e42-8589-0130ee9ff6b3") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "b8e6d07c-596c-44ef-9bed-c266491f9a4b") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "2635a543-dd70-4118-892f-2536c0e2a23a") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "5d3b86c5-23ed-4f8d-b4f9-2f0a6f2b5371") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "8a9fb8a9-f82e-421c-9a3d-efda6114a0d6") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "c5aa4b15-3a49-4e48-aa4b-93fb9434694b") + ) + (pad "1" thru_hole circle + (at 0 0 90) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 9 "Net-(D2-K)") + (pinfunction "K") + (pintype "passive") + (uuid "43fb71e1-af97-4bb0-bbba-19e9c758b00f") + ) + (pad "2" thru_hole oval + (at 2.54 0 90) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 3 "GND") + (pinfunction "A") + (pintype "passive") + (uuid "e0afb2aa-fd20-4f27-aa21-405c17a841ad") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "88eee050-1f6e-4b7d-956e-b68a6d184d3d") + (at 61.94 105.36 -90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "R15" + (at 2.975622 -2.430451 0) + (layer "F.SilkS") + (uuid "e84e0394-33f4-4f73-bb5a-3c497fb44bba") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "200" + (at 1.27 1.92 90) + (layer "F.Fab") + (hide yes) + (uuid "cc50b4db-f9a4-47e4-9c5a-de4f6b9b372e") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "03ac3ef3-da9b-45af-8fb8-9c48828dca77") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Resistor" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "836905f3-1854-401d-9f9a-05dc336f0f1c") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/ecfd7613-45e7-4949-88b5-f33fd1e3a59e") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "d7889851-719a-4f0e-a5ef-37303f437a10") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "cb9c4244-3998-44f5-b623-2c6a639f9c67") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "363dfcd3-2abe-44cd-a8ae-47046bff7491") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "04dcb482-be1c-4aef-81c7-82e050eceb6f") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "bded68ca-02e0-4891-bc91-9a7efd46d714") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "7ca39ae6-a869-4917-9211-de348471e2e5") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "f9930ee4-73dc-47c3-a61b-6e6ee1265373") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "2f2d545f-1858-4dd5-a4ee-e52d44c257b0") + ) + (pad "1" thru_hole circle + (at 0 0 270) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 15 "Net-(VCC_B2-Pin_1)") + (pintype "passive") + (uuid "c7011c0b-56aa-440b-9bd4-feaddb54374d") + ) + (pad "2" thru_hole oval + (at 2.54 0 270) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 9 "Net-(D2-K)") + (pintype "passive") + (uuid "c6ab1031-4d70-424e-9213-8ef3496d68ff") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "930fb205-d5cd-48f9-a781-9004a9399450") + (at 61.94 115.52 90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "C8" + (at -0.613463 1.997704 0) + (layer "F.SilkS") + (uuid "40966c82-ce75-4b79-8949-185ad92092bb") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "0.1uF" + (at 1.27 1.92 90) + (layer "F.Fab") + (hide yes) + (uuid "d5a5f12a-7151-4e16-9321-d859c322c039") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 90) + (layer "F.Fab") + (hide yes) + (uuid "46b6d6ce-adee-4dfe-aab1-e4d9ce05a5b6") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Unpolarized capacitor" + (at 0 0 90) + (layer "F.Fab") + (hide yes) + (uuid "c1cfc99b-eb8e-4b7e-afb0-9da993eaf499") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/0074ef94-0d36-4108-8f14-b1d064783f91") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "0d325ce5-9686-46e1-9710-553c86fad016") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "232f966d-1a71-4f43-a9cc-c02258ab6ef5") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "6b6605b9-1d95-4609-af46-2b13c6043844") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "e325372f-b4a1-4c37-a40d-a7deb804eba1") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "99d0fa06-d55e-4736-a715-055daa0c5d70") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "f2c5b4b1-2c5c-4bdb-96b1-5b4a00bf5ecf") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "417cc6a6-89c8-4f98-853c-cdcde77c0d4c") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "246f1a83-7735-4299-904e-687af4cc2121") + ) + (pad "1" thru_hole circle + (at 0 0 90) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 9 "Net-(D2-K)") + (pintype "passive") + (uuid "04c2d50b-f84b-4b00-9c08-d75289fd0c43") + ) + (pad "2" thru_hole oval + (at 2.54 0 90) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 3 "GND") + (pintype "passive") + (uuid "229161d5-9ab3-4020-8df7-6107acbc7bac") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "959d4b1a-fc40-4583-b414-2275fb79e479") + (at 82.26 105.36 -90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "R5" + (at 2.956969 -2.014328 180) + (layer "F.SilkS") + (uuid "e24cc170-5302-456e-aeca-910cb0640507") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "200" + (at 1.27 1.92 270) + (layer "F.Fab") + (hide yes) + (uuid "e8289d04-0393-4a67-9ddf-3a5c9d0fa599") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "73a25dfa-9c11-4c4a-ab5c-a9628fcee152") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Resistor" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "9e8bcd89-5f4d-4cbe-b4d1-ceed3cbd2ec7") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/7f13f25b-68e1-44e1-992e-6e69c71b1400") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "d3f7b3a8-d135-401e-8064-8ad0069d43c9") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "81fe116a-52c3-429f-9aed-1586910c406e") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "89181fdb-23b4-4ea1-b31e-b0eff898a7d0") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "bf57fa49-14f5-41f9-9acd-09d4d23a11da") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "3b904076-a20d-4b59-ae30-4e3c5d8e3f16") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "e1f22170-d15b-4801-ac28-f748ddf101ed") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "a193c140-1c13-4217-92f5-4ffc95ed767a") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "6f5ffd86-4625-4173-8d26-1174d5496705") + ) + (pad "1" thru_hole circle + (at 0 0 270) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 8 "Net-(VCC_A2-Pin_1)") + (pintype "passive") + (uuid "e8c3d387-00c8-4398-a83a-9365ebf93a43") + ) + (pad "2" thru_hole oval + (at 2.54 0 270) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 1 "Net-(D1-K)") + (pintype "passive") + (uuid "58b5a7c0-9f6e-4e46-85bc-5db95e418a01") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Library:conn_holepad" + (layer "F.Cu") + (uuid "95f3cf11-5e3e-4f4f-ad36-1e7c81240b7f") + (at 82.26 156.16) + (property "Reference" "X3A1" + (at -0.039043 2.524434 0) + (unlocked yes) + (layer "F.SilkS") + (uuid "ca690d1f-83c1-45bb-babc-efa06be639dc") + (effects + (font + (size 1 1) + (thickness 0.1) + ) + ) + ) + (property "Value" "Conn_01x01_Pin" + (at 0 1 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "42ce4a1a-b352-4d63-86f8-1877213d9cb7") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "2860c4ad-7bbf-4ff9-b499-7188f39d7670") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Generic connector, single row, 01x01, script generated" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "7cb13238-aa71-424c-b9d4-b3de9d8ff902") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/caa6c8b8-ee7b-44c3-a728-7e55c5ac92d4") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_text user "${REFERENCE}" + (at 0 2.5 0) + (unlocked yes) + (layer "F.Fab") + (uuid "7931f949-744c-4070-b5b9-9141b8124a2d") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" thru_hole circle + (at 0 0) + (size 3 3) + (drill 1.5) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 20 "Net-(X3A1-Pin_1)") + (pinfunction "Pin_1") + (pintype "passive") + (uuid "1096f159-2fd7-4d0f-8c49-5e8e92f1ac73") + ) + (embedded_fonts no) + ) + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "96edd9a0-1961-43b7-abec-2fcd9dc521f8") + (at 59.4 95.2) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "R18" + (at 0.212099 1.734976 0) + (layer "F.SilkS") + (uuid "7d01e317-e30d-4099-9024-f03be67c49ad") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "47K" + (at 1.27 1.92 0) + (layer "F.Fab") + (hide yes) + (uuid "ba3fee32-5607-4e2d-8c80-bfa3f4f0643f") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "9981c7fd-7812-4525-9805-d31044250e64") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Resistor" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "ca20e36f-fd0c-4c07-b61b-b02c62bb7c45") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/dffbb023-66a6-4908-bab6-7170bcf5a1bb") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "941cde38-2805-4446-8659-7045ce2defdd") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "96c32c3a-b018-4d93-b5ef-63127a8581b0") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "a9870692-2cf2-4816-a3ce-64f6e44ef8b0") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "96852ad8-6479-4d59-bfd7-b9e66893bda7") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "cd907c6f-df83-4fdd-81e6-e955798d3470") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "a04fad82-1cc8-49f3-896a-f04b357b4557") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "3734aed0-0cae-4a81-b5c7-2adecc43f460") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "0b6fa5b7-9028-41fe-b3b1-d74fb8700b63") + ) + (pad "1" thru_hole circle + (at 0 0) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 15 "Net-(VCC_B2-Pin_1)") + (pintype "passive") + (uuid "1ba822b9-917a-43c2-b3f6-8db9cb7ec407") + ) + (pad "2" thru_hole oval + (at 2.54 0) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 14 "Net-(C12-Pad1)") + (pintype "passive") + (uuid "26895040-bb44-4da7-8f1e-68bb588e3ee6") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "C47u35v:CAPPRD200W50D525H1250" + (layer "F.Cu") + (uuid "99197f4c-2fe4-4089-b0fa-e89e30d9edc8") + (at 77.18 118.06 -90) + (descr "5*11") + (tags "Capacitor Polarised") + (property "Reference" "C7" + (at 4.844928 -0.6182 0) + (layer "F.SilkS") + (uuid "86e5d921-e8e0-493b-83a4-fb49f4fa5c56") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Value" "47uF 35v" + (at 0 0 90) + (layer "F.SilkS") + (hide yes) + (uuid "f2ac2ce7-3672-4776-87b3-bc13e8c293dc") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "d2fb2d67-0617-43c5-982d-bbdd386c3194") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Polarized capacitor" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "ebb75ed9-bc0f-4138-af58-93e429173144") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/e99cf364-578f-476c-924e-844a1b1a8e85") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_circle + (center 1 0) + (end 1 2.625) + (stroke + (width 0.2) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "f17d0654-baf1-43be-a44a-a8e29655dd2b") + ) + (fp_circle + (center 1 0) + (end 1 2.625) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "08ee4e0f-41a8-4ecd-aed7-39440055cbe5") + ) + (pad "1" thru_hole rect + (at 0 0 270) + (size 1.1 1.1) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 8 "Net-(VCC_A2-Pin_1)") + (pintype "passive") + (uuid "465c2404-a3dd-4ed4-8c70-900027804e71") + ) + (pad "2" thru_hole circle + (at 2 0 270) + (size 1.1 1.1) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 3 "GND") + (pintype "passive") + (uuid "06f032a5-26c0-4697-afaf-b621b86d80b4") + ) + (embedded_fonts no) + (model "UVZ1V470MDD1TA.stp" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "99c3b2dd-1fe3-41c8-bfa0-f729178fe195") + (at 89.88 90.12 90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "R7" + (at -1.860768 -0.044624 0) + (layer "F.SilkS") + (uuid "692d2aa6-91ed-4927-ac36-d095b976a9dc") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "47K" + (at 1.27 1.92 90) + (layer "F.Fab") + (hide yes) + (uuid "188217de-9e22-4812-8857-52b8ed838eee") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 90) + (layer "F.Fab") + (hide yes) + (uuid "12bc9038-f77b-402c-801c-470512c30ab9") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Resistor" + (at 0 0 90) + (layer "F.Fab") + (hide yes) + (uuid "40921298-6c18-4b74-a495-a820904530c5") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/9073f975-3395-426e-a26b-e4f39deda04a") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "391657fd-92d7-4fd2-bccb-6a03875eac4c") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "1db74212-d692-4e1b-b4bd-a658f524ed32") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "d7e27410-0677-4c4e-b058-367e26c8bebe") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "35067d5e-e5a4-4f8d-a6b6-33b2cfd3edb8") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "cae7b1d2-616f-45cf-b639-87ad890f8e8e") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "5e460e4e-a63e-4f00-a6a7-0661ca99b1a6") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "85d6eb9b-579b-45bd-9e49-b940e2b36e87") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "8aa682a4-9a8b-419a-a646-de3fc0367b4c") + ) + (pad "1" thru_hole circle + (at 0 0 90) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 7 "Net-(C5-Pad1)") + (pintype "passive") + (uuid "c51d383a-b53a-4671-8a0c-96d419655fd4") + ) + (pad "2" thru_hole oval + (at 2.54 0 90) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 3 "GND") + (pintype "passive") + (uuid "eb5a2e53-20bc-4282-b37c-0fa2d2fb1534") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Library:conn_holepad" + (layer "F.Cu") + (uuid "9e7b1d91-5ecd-4ac9-8f97-6818989902ee") + (at 67.02 156.16) + (property "Reference" "X2B1" + (at -0.004879 2.494589 0) + (unlocked yes) + (layer "F.SilkS") + (uuid "43813caf-7586-4993-b65c-5ab1960aca2c") + (effects + (font + (size 1 1) + (thickness 0.1) + ) + ) + ) + (property "Value" "Conn_01x01_Pin" + (at 0 1 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "bdf7e597-4a99-404c-bf92-6b07911c38c9") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "0ba49c4a-bdca-47ed-bde9-7d588a5c68c6") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Generic connector, single row, 01x01, script generated" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "7f1d7575-40d3-41b7-8927-15e56e129a1a") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/9e00ee5d-3600-4941-9f50-ffa5b59f36da") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_text user "${REFERENCE}" + (at 0 2.5 0) + (unlocked yes) + (layer "F.Fab") + (uuid "846c5826-b5a8-4975-b14a-5205a1815a08") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" thru_hole circle + (at 0 0) + (size 3 3) + (drill 1.5) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 23 "Net-(X2B1-Pin_1)") + (pinfunction "Pin_1") + (pintype "passive") + (uuid "d41ca2f8-9791-46f7-80af-83983bcb8fe6") + ) + (embedded_fonts no) + ) + (footprint "Library:conn_holepad" + (layer "F.Cu") + (uuid "a4df7562-a290-407a-ab81-43fab86b5a61") + (at 77.18 69.8) + (property "Reference" "SGNL_A1" + (at 0 -0.5 0) + (unlocked yes) + (layer "F.SilkS") + (hide yes) + (uuid "2bc4b8e1-d431-481c-bc25-7df681101c5e") + (effects + (font + (size 1 1) + (thickness 0.1) + ) + ) + ) + (property "Value" "Conn_01x01_Pin" + (at 0 1 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "3081efc6-5f2e-45d5-9bb2-c009835491ec") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "be9a9e0d-5d1a-46c8-9221-699d2e0d22dd") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Generic connector, single row, 01x01, script generated" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "59222085-ee46-40fe-8f34-1a3f8e7dd036") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/8a06125c-2a98-42e5-987b-f3b86e05fdf0") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (pad "1" thru_hole circle + (at 0 0) + (size 3 3) + (drill 1.5) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 16 "Net-(SGNL_A1-Pin_1)") + (pinfunction "Pin_1") + (pintype "passive") + (uuid "cf71c2cc-ae6c-46bd-97e1-d41546650fe7") + ) + (embedded_fonts no) + ) + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "aa6efbc5-6ba3-459f-9580-cd462fcda12c") + (at 87.34 115.52 90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "C1" + (at -0.586416 2.015375 0) + (layer "F.SilkS") + (uuid "ebbab0e7-98de-41b6-b0cb-c788ec26123c") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "0.1uF" + (at 1.27 1.92 90) + (layer "F.Fab") + (hide yes) + (uuid "5c6adab0-2d60-41b4-bbc3-ac42d5a1c82e") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 90) + (layer "F.Fab") + (hide yes) + (uuid "16b39a61-a7a0-4f25-a7db-287aa554ee86") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Unpolarized capacitor" + (at 0 0 90) + (layer "F.Fab") + (hide yes) + (uuid "9080a5fc-86f9-41e8-8dfb-fb9c54a14e97") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/85f8809e-e152-4de2-87ff-91f95cdc3dd3") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "59a80458-4570-4521-bb70-04a7b47ca69a") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "8c9a20c3-ea9c-4884-96e1-4d56069549b2") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "10f5d38a-7c6e-4919-8d15-c7303ae24b4c") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "600363cc-f599-45b8-82cc-97ad84ada0f3") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "ee3862ec-9f0a-4293-8462-ed9a93b4676e") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "24f025a1-3efa-47c2-a005-47860e3c5ef3") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "5d96c95e-3ef0-4f19-85e8-ed3f64d3b4ed") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "d20545d5-6330-46fa-845d-98299a02fb8c") + ) + (pad "1" thru_hole circle + (at 0 0 90) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 1 "Net-(D1-K)") + (pintype "passive") + (uuid "fafa54b4-7ce4-401c-90ac-82e976008a01") + ) + (pad "2" thru_hole oval + (at 2.54 0 90) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 3 "GND") + (pintype "passive") + (uuid "d7be3e35-e20f-4d53-9cad-865efe817c1c") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Library:conn_holepad" + (layer "F.Cu") + (uuid "ae236a0b-2833-4b1a-b543-6315ef73a5e5") + (at 83.53 69.8) + (property "Reference" "VCC_A2" + (at 0 -0.5 0) + (unlocked yes) + (layer "F.SilkS") + (hide yes) + (uuid "d4a06815-153a-44b7-98be-9be23dd99874") + (effects + (font + (size 1 1) + (thickness 0.1) + ) + ) + ) + (property "Value" "Conn_01x01_Pin" + (at 0 1 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "eca0be31-9f7f-4545-972d-bfb6393a3a66") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "031750d9-3a4f-4ecc-8a39-c91b45ec816c") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Generic connector, single row, 01x01, script generated" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "4975db62-1587-427f-aae3-1156b0b4d15f") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/c623b86b-7f7f-40b9-93e6-26635740e815") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (pad "1" thru_hole circle + (at 0 0) + (size 3 3) + (drill 1.5) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 8 "Net-(VCC_A2-Pin_1)") + (pinfunction "Pin_1") + (pintype "passive") + (uuid "f12ffd00-16b3-4975-83e7-a949d3ea280d") + ) + (embedded_fonts no) + ) + (footprint "Library:conn_holepad" + (layer "F.Cu") + (uuid "b06caee4-0d58-4da3-b2b7-a0187d91e230") + (at 67.02 69.8) + (property "Reference" "SGNL_B1" + (at 0 -0.5 0) + (unlocked yes) + (layer "F.SilkS") + (hide yes) + (uuid "a5870f43-5667-417d-8f22-e824b3f11f3e") + (effects + (font + (size 1 1) + (thickness 0.1) + ) + ) + ) + (property "Value" "Conn_01x01_Pin" + (at 0 1 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "4ea611fb-e0e3-4ce4-8d5f-b6df2c9d67ef") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "78955fe8-8b1e-436b-885f-9da70f4ff973") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Generic connector, single row, 01x01, script generated" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "9649aa6e-c541-4d38-87e8-475e1a11cf47") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/5927db5e-0de5-4020-a1e2-d3c795f23f3a") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (pad "1" thru_hole circle + (at 0 0) + (size 3 3) + (drill 1.5) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 18 "Net-(SGNL_B1-Pin_1)") + (pinfunction "Pin_1") + (pintype "passive") + (uuid "4cd77282-26c4-4a20-b562-8a563709271d") + ) + (embedded_fonts no) + ) + (footprint "C47u63v:CAPPRD350W65D800H1250" + (layer "F.Cu") + (uuid "b5075aca-42d2-4f70-96dd-3872779dc083") + (at 63.52 146) + (descr "EEU-EB1J470SJ-1") + (tags "Capacitor Polarised") + (property "Reference" "C10" + (at 1.709261 2.043428 0) + (layer "F.SilkS") + (uuid "04109b5d-8e3d-466d-af92-2d3e23461013") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Value" "47uF 63v" + (at 0 0 0) + (layer "F.SilkS") + (hide yes) + (uuid "cf894c60-e36b-4996-9148-04c44f8822b4") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "bb691852-a8d1-431e-886a-89de0adc7535") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Polarized capacitor" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "239618a7-6821-4575-a2ee-393ff4ed0ec2") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/90b176ff-c759-4172-98d6-a482a71dc515") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_circle + (center 1.75 0) + (end 1.75 4) + (stroke + (width 0.2) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "e5dc9451-87d8-41cb-9aba-07dd9c72d792") + ) + (fp_circle + (center 1.75 0) + (end 1.75 4) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "727123a4-062b-4900-9e6f-743331ddb861") + ) + (fp_text user "${REFERENCE}" + (at 1.709261 2.043428 0) + (layer "F.Fab") + (uuid "aacf7dd8-53bc-4669-8fd0-d2c10ee3c884") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (pad "1" thru_hole rect + (at 0 0) + (size 1.275 1.275) + (drill 0.85) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 10 "Net-(C10-Pad1)") + (pintype "passive") + (uuid "72fa0ea7-e1ff-4997-8dd4-3dda2339d826") + ) + (pad "2" thru_hole circle + (at 3.5 0) + (size 1.275 1.275) + (drill 0.85) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 11 "Net-(C10-Pad2)") + (pintype "passive") + (uuid "c3a63387-05f2-48bc-8b7e-af16fd833770") + ) + (embedded_fonts no) + (model "EEU-EB1J470SJ.stp" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "b84e8712-6efc-465e-95e6-3ac45935569c") + (at 87.34 120.6 -90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "R3" + (at 2.957313 -1.970608 180) + (layer "F.SilkS") + (uuid "93ac7d19-d67c-45b8-a018-e66d0d693255") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "2.2K" + (at 1.27 1.92 270) + (layer "F.Fab") + (hide yes) + (uuid "c002e533-0fea-41b3-ad7a-366d7df81023") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "c179dc51-8c1b-411a-a9fb-a3c9b6285f69") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Resistor" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "9a3e861b-d2fd-4cdd-9101-acdecf7dc060") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/f8426791-547e-42ff-b8e0-5863e33d65fa") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "fabcbd8c-7383-4f28-b114-7b72a06c9db4") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "91cb5219-3d6f-470e-bbb3-a67f1896486d") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "82035587-db50-41ac-99bf-46552f523b4f") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "245990a2-da54-4dac-b95f-bffa48f885c6") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "d0168173-bd98-4fe2-a2f9-108ce9cd7313") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "10563e31-80d1-400a-80f8-400fa4a9908e") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "0b2c0b3b-30d1-4291-9664-2a73420c5026") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "50214740-bcbb-4169-96dc-e5e729a9abc9") + ) + (pad "1" thru_hole circle + (at 0 0 270) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 1 "Net-(D1-K)") + (pintype "passive") + (uuid "cedec1a4-41e2-4f7c-ab31-82d215a27498") + ) + (pad "2" thru_hole oval + (at 2.54 0 270) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 2 "Net-(C3-Pad1)") + (pintype "passive") + (uuid "afff5184-659d-42f6-bb50-57f31b58f697") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "bcd770fa-1ed0-48b0-8cbb-2f87dc5541a4") + (at 56.86 128.22 -90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "R11" + (at 2.989661 -2.425673 180) + (layer "F.SilkS") + (uuid "9a4fa8ac-f6aa-4b1e-a05d-52c099ecae4f") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "47" + (at 1.27 1.92 270) + (layer "F.Fab") + (hide yes) + (uuid "962b8959-cd71-424d-9398-040fad19f045") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "281af48f-5c73-453b-9d26-8571ab25ebd1") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Resistor" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "f9a239ad-a0bf-4260-b92e-9b01d9bc0dde") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/4281c715-bfa5-4c1d-833f-007ae19a4629") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "0f00f251-48ff-4520-818f-2835947dbbb5") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "1f82be44-c34c-45c4-a30e-d1d9d366e1e8") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "817873f0-a5c6-4482-916c-b8bce3351ef6") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "be36d02b-41c4-493a-9114-68008531c09c") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "c004e9fc-9e95-467f-b958-961ff4734bc8") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "ded4a380-55a3-4c46-9dee-d6b001bdd121") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "cf4a0f84-049d-482e-bfa5-0f57f4c43070") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "f98b31ee-14a8-4d0a-abaa-9b47340b48fc") + ) + (pad "1" thru_hole circle + (at 0 0 270) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 10 "Net-(C10-Pad1)") + (pintype "passive") + (uuid "15d39eaf-4060-4dfa-b0c8-a68e2a2c5e4f") + ) + (pad "2" thru_hole oval + (at 2.54 0 270) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 22 "Net-(X3B1-Pin_1)") + (pintype "passive") + (uuid "0ab0880e-3789-4e75-baf6-f6b9fa2c8ffa") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Library:conn_holepad" + (layer "F.Cu") + (uuid "c262cae7-d9e8-4f1f-a599-ab4800cab255") + (at 54.32 69.8) + (property "Reference" "GND_B1" + (at 0 -0.5 0) + (unlocked yes) + (layer "F.SilkS") + (hide yes) + (uuid "94ee880b-62c4-4690-b8db-c8deb2a802c1") + (effects + (font + (size 1 1) + (thickness 0.1) + ) + ) + ) + (property "Value" "Conn_01x01_Pin" + (at 0 1 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "d231f684-55fa-4bd0-89a8-90307185cb75") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "1a8657a6-9f7a-4c1d-893f-a13beaad7a72") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Generic connector, single row, 01x01, script generated" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "5657a3a8-4c63-477b-b008-9ea1533ac316") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/989fc3e9-94aa-4ae0-8fd0-530b54bc7c6a") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (pad "1" thru_hole circle + (at 0 0) + (size 3 3) + (drill 1.5) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 3 "GND") + (pinfunction "Pin_1") + (pintype "passive") + (uuid "f252adea-92a7-4e02-b375-5662a1008766") + ) + (embedded_fonts no) + ) + (footprint "C47u35v:CAPPRD200W50D525H1250" + (layer "F.Cu") + (uuid "c6f7ad19-b3e5-4c35-be9c-f49f41b71b9c") + (at 75.18 110.44) + (descr "5*11") + (tags "Capacitor Polarised") + (property "Reference" "C5" + (at 1.185658 3.822112 0) + (layer "F.SilkS") + (uuid "24d7d41c-a663-47c1-8766-fb44e232409e") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Value" "47uF 35v" + (at 0 0 0) + (layer "F.SilkS") + (hide yes) + (uuid "b4f9aa59-0764-4eae-8c6d-9997b8fa7f0c") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "de9118d6-a036-45ec-bb52-022719991bde") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Polarized capacitor" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "7982e65d-e2ca-4d6d-879d-09fecee0785c") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/4b15cc8f-884d-43ed-8a34-09c6b829c7ae") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_circle + (center 1 0) + (end 1 2.625) + (stroke + (width 0.2) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "40116a95-4088-4a06-9824-3e994e651ff3") + ) + (fp_circle + (center 1 0) + (end 1 2.625) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "181d21fe-9b9e-4efc-9745-dea381a54c65") + ) + (pad "1" thru_hole rect + (at 0 0) + (size 1.1 1.1) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 7 "Net-(C5-Pad1)") + (pintype "passive") + (uuid "e476c53c-8951-41ac-bbc2-278126285c9f") + ) + (pad "2" thru_hole circle + (at 2 0) + (size 1.1 1.1) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 3 "GND") + (pintype "passive") + (uuid "8a97c5c8-fa77-4792-bcb6-843f0102dd8e") + ) + (embedded_fonts no) + (model "UVZ1V470MDD1TA.stp" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "C47u35v:CAPPRD200W50D525H1250" + (layer "F.Cu") + (uuid "c8cfe034-72d1-41a5-9f6c-2a8b58c4cd4e") + (at 77.18 125.68 -90) + (descr "5*11") + (tags "Capacitor Polarised") + (property "Reference" "C2" + (at 4.880074 -0.6182 0) + (layer "F.SilkS") + (uuid "82a06bbe-6f85-4009-a909-b329e94c0fb2") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Value" "47uF 35v" + (at 0 0 90) + (layer "F.SilkS") + (hide yes) + (uuid "60c1f95e-29ae-4968-820b-c216c26f2b5c") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "3d41cf57-5a79-46d6-ba3d-61d385e81808") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Polarized capacitor" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "b6c8f9c7-fbe3-4868-bdff-3cd7192bda6d") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/4af43834-c924-4e65-939c-9334e1de4766") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_circle + (center 1 0) + (end 1 2.625) + (stroke + (width 0.2) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "a013cb76-2687-462b-b75e-1d91f94c1fe4") + ) + (fp_circle + (center 1 0) + (end 1 2.625) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "077d1680-f903-4e77-9d5a-52100de2801a") + ) + (pad "1" thru_hole rect + (at 0 0 270) + (size 1.1 1.1) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 1 "Net-(D1-K)") + (pintype "passive") + (uuid "1ea38779-7b99-4e3c-b48d-39ba0b2f0dab") + ) + (pad "2" thru_hole circle + (at 2 0 270) + (size 1.1 1.1) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 3 "GND") + (pintype "passive") + (uuid "8ce33f08-44ac-4d15-acca-7b62eca58ef5") + ) + (embedded_fonts no) + (model "UVZ1V470MDD1TA.stp" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Library:conn_holepad" + (layer "F.Cu") + (uuid "cbc40c09-e30e-460a-bcc4-8171f797a030") + (at 89.88 69.8) + (property "Reference" "GND_A1" + (at 0 -0.5 0) + (unlocked yes) + (layer "F.SilkS") + (hide yes) + (uuid "0947c915-f5c6-432f-bac1-be020a7c7bb5") + (effects + (font + (size 1 1) + (thickness 0.1) + ) + ) + ) + (property "Value" "Conn_01x01_Pin" + (at 0 1 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "a5e5504f-2e7f-452d-96ef-037a92a4a23b") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "35fedb7b-b962-44fc-a5f8-1d30db13f476") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Generic connector, single row, 01x01, script generated" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "ce0bf894-68f0-4eb0-9f8d-03d9b5d59c91") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/dc9beee8-362a-431f-ae58-61cdcb6832dc") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (pad "1" thru_hole circle + (at 0 0) + (size 3 3) + (drill 1.5) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 3 "GND") + (pinfunction "Pin_1") + (pintype "passive") + (uuid "e567df10-68fb-4fdd-87c4-6b1de5057a6f") + ) + (embedded_fonts no) + ) + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "cc303b2f-da8c-4df0-8c75-83ec2aa6f6fc") + (at 56.86 120.6 -90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "R13" + (at 2.950784 -2.43873 0) + (layer "F.SilkS") + (uuid "40383974-586f-488f-8d15-c01cebca7367") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "2.2K" + (at 1.27 1.92 90) + (layer "F.Fab") + (hide yes) + (uuid "c2c5b360-c807-4f30-9b32-b41bbee60ce9") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "aee206dd-4468-4364-8214-1a093a911af2") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Resistor" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "280854fe-c3c6-4b28-ba78-de8a8a12bc8f") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/486efbe6-6d60-4f65-a28a-eac2f703a21a") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "0c243eae-8e52-488e-a46c-947e4f00312f") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "c3db4bd4-0b60-4cb5-b000-4ad70d25d9d2") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "e81289d4-047f-4bc2-896f-9a6e0ff93552") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "afbc005d-9813-4792-ae0f-efc02afcb9fb") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "4200db4c-fcd2-48e8-977c-4ee8d4040212") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "e402de82-732e-43fe-94e4-3ec091ea86f6") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "0609b196-f404-48f2-a5ed-1c23bbb9d89f") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "b8c28dfb-b198-482c-a03d-5187315aa79b") + ) + (pad "1" thru_hole circle + (at 0 0 270) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 9 "Net-(D2-K)") + (pintype "passive") + (uuid "430a3414-b187-4b96-962c-d5afbac9f47b") + ) + (pad "2" thru_hole oval + (at 2.54 0 270) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 10 "Net-(C10-Pad1)") + (pintype "passive") + (uuid "57635aef-4120-4aa4-87b9-0454e8f067e7") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Library:conn_holepad" + (layer "F.Cu") + (uuid "d52543a2-d091-4b9c-b89b-c6f43a6f94a3") + (at 60.67 69.8) + (property "Reference" "VCC_B2" + (at 0 -0.5 0) + (unlocked yes) + (layer "F.SilkS") + (hide yes) + (uuid "999556b9-5a96-4aa2-8b56-6ff0dc5ca186") + (effects + (font + (size 1 1) + (thickness 0.1) + ) + ) + ) + (property "Value" "Conn_01x01_Pin" + (at 0 1 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "6fce5574-8878-4437-a31a-399b7d6c31ad") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "2c6738d7-dc77-4d1f-9018-9062e610be37") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Generic connector, single row, 01x01, script generated" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "8ebea94a-dc88-4b40-ba4f-9485b075c8bd") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/6e74e034-da91-4106-b8de-7f1079a017da") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (pad "1" thru_hole circle + (at 0 0) + (size 3 3) + (drill 1.5) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 15 "Net-(VCC_B2-Pin_1)") + (pinfunction "Pin_1") + (pintype "passive") + (uuid "1cbaaaae-3dbb-4e2b-86b8-dcce87cdf954") + ) + (embedded_fonts no) + ) + (footprint "Connector_Pin:Pin_D1.0mm_L10.0mm" + (layer "F.Cu") + (uuid "d692ec11-ab6f-4974-8421-c0368dbf4bfd") + (at 87.34 107.9) + (descr "solder Pin_ diameter 1.0mm, hole diameter 1.0mm (press fit), length 10.0mm") + (tags "solder Pin_ press fit") + (property "Reference" "VCC_A1" + (at 0 2.54 0) + (layer "F.SilkS") + (uuid "bcc587bd-d6e7-4ee4-934b-57f69efee420") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "Conn_01x01_Pin" + (at 0 -2.05 0) + (layer "F.Fab") + (hide yes) + (uuid "76102052-38a6-4791-a45f-cc550315cc22") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "d2e2225d-a65d-4b05-acc2-4067d8a95c3a") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Generic connector, single row, 01x01, script generated" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "b5be9ed2-962c-48a9-bfc5-81a9d115bdd4") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/7056a7e2-eebb-4df3-8f54-dadb45bfed44") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_circle + (center 0 0) + (end 1.25 0.05) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "93f1e5e5-0c0e-4c7a-b73d-030d479f2f03") + ) + (fp_circle + (center 0 0) + (end 1.5 0) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + (uuid "d14b7f59-ddf5-434e-a696-7056665ee85a") + ) + (fp_circle + (center 0 0) + (end 0.5 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "b9a14ece-9b3b-46a2-aa18-c9f98a17f8db") + ) + (fp_circle + (center 0 0) + (end 1 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "2ea6bfbc-373f-49ce-87c4-76d0b945f499") + ) + (fp_text user "${REFERENCE}" + (at 0 2.54 0) + (layer "F.Fab") + (uuid "1a183987-d28e-4930-9de2-f47cf58afc0a") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" thru_hole circle + (at 0 0) + (size 2 2) + (drill 1) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 1 "Net-(D1-K)") + (pinfunction "Pin_1") + (pintype "passive") + (uuid "34803306-11b2-4687-9250-7e4da9c0467d") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Connector_Pin.3dshapes/Pin_D1.0mm_L10.0mm.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "d78725d9-47d7-4c83-be9b-4988d133a9b1") + (at 54.32 87.58 -90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "R17" + (at 3.02605 -2.438207 0) + (layer "F.SilkS") + (uuid "b5b0ae33-50f6-4aa9-bad9-6288811ae392") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "47K" + (at 1.27 1.92 90) + (layer "F.Fab") + (hide yes) + (uuid "4c53eb70-ba9c-4268-9c7f-16a0f882d12c") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "665cb565-ff0f-4677-a308-325af43d6683") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Resistor" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "061ef799-3c80-4782-99d1-be37b915e54d") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/8a64f8ab-cec7-4969-9401-c34ade5f0cb5") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "4b654bad-6c82-4e13-81eb-7690e7d65088") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "ecb0d627-3dd7-45ed-94b8-d110571a4102") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "351a8d7b-5519-49b6-be48-159d30d68ba9") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "027b16d4-ed89-4ecb-9d56-55b28958995a") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "a14ceb7e-9045-4f6b-a877-1bcdabbccfc3") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "b2638917-4ba7-4f9a-ba60-7bbf29a08545") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "04b0efa9-7fa9-4091-806e-0feb46bcca8a") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "247a97aa-db32-42a5-9497-b9292b6b560c") + ) + (pad "1" thru_hole circle + (at 0 0 270) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 14 "Net-(C12-Pad1)") + (pintype "passive") + (uuid "b7485c42-0a31-4c6d-b2c9-9bf54242cc73") + ) + (pad "2" thru_hole oval + (at 2.54 0 270) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 3 "GND") + (pintype "passive") + (uuid "c5b5e88b-0bde-42ff-bc86-61422ecab011") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "C47u63v:CAPPRD350W65D800H1250" + (layer "F.Cu") + (uuid "d9eee99c-ac07-4010-90bf-79bd31a2f61a") + (at 77.18 146) + (descr "EEU-EB1J470SJ-1") + (tags "Capacitor Polarised") + (property "Reference" "C3" + (at 1.91582 2.211304 0) + (layer "F.SilkS") + (uuid "68af9610-47d8-4b28-b278-6835e9f14d62") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Value" "47uF 63v" + (at 0 0 0) + (layer "F.SilkS") + (hide yes) + (uuid "797c0ff2-1abe-4cef-bea8-2fdb46466297") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "149a27a3-9382-48cc-ba82-ac9d9e3cc236") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Polarized capacitor" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "f5903234-3c2b-4c78-9b74-48440fe6869a") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/b794b8cc-7dca-48f0-a5b9-9fe56f5cb9c1") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_circle + (center 1.75 0) + (end 1.75 4) + (stroke + (width 0.2) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "f1b0b285-09c1-4cac-8dfb-1ae231a7707b") + ) + (fp_circle + (center 1.75 0) + (end 1.75 4) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "fcaa04ce-8c24-4122-bb76-2277c48bccb8") + ) + (pad "1" thru_hole rect + (at 0 0) + (size 1.275 1.275) + (drill 0.85) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 2 "Net-(C3-Pad1)") + (pintype "passive") + (uuid "21675859-af13-49a5-a89a-4474ecd9d726") + ) + (pad "2" thru_hole circle + (at 3.5 0) + (size 1.275 1.275) + (drill 0.85) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 4 "Net-(C3-Pad2)") + (pintype "passive") + (uuid "a8594eb3-c6a5-4d87-9514-85efd0312e03") + ) + (embedded_fonts no) + (model "EEU-EB1J470SJ.stp" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (layer "F.Cu") + (uuid "ddaadb9e-34f4-4d27-b880-e32c97542663") + (at 82.26 120.6 -90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Reference" "R4" + (at 2.990888 -1.947178 180) + (layer "F.SilkS") + (uuid "43cbdaf2-5dad-4be4-9de3-4d78d516d7ab") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "2.2K" + (at 1.27 1.92 90) + (layer "F.Fab") + (hide yes) + (uuid "832d4942-107e-4326-b3fb-18baf1123f02") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "182f3f42-234f-4aa6-8822-3a8dc642f264") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Resistor" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "2e9ddc3d-9464-4261-99c6-c9ae56e20b5a") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/831a82f3-bee1-4a20-9f0c-de8891a80b24") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_line + (start 0.92 0) + (end 1.54 0) + (stroke + (width 0.12) + (type solid) + ) + (layer "F.SilkS") + (uuid "5de920bc-4e4d-4053-9613-313706e2500e") + ) + (fp_circle + (center 0 0) + (end 0.92 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "fd69e8ad-e9cf-4107-bfbb-ec8585d1b82d") + ) + (fp_line + (start -1.05 1.05) + (end 3.49 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "554f7d26-3640-4294-a434-eabcfd4bc15f") + ) + (fp_line + (start 3.49 1.05) + (end 3.49 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "1024eda9-edb0-4304-b86a-f738438a6539") + ) + (fp_line + (start -1.05 -1.05) + (end -1.05 1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "c07d5f7c-5786-4121-9594-1fc82a628b7f") + ) + (fp_line + (start 3.49 -1.05) + (end -1.05 -1.05) + (stroke + (width 0.05) + (type solid) + ) + (layer "F.CrtYd") + (uuid "f7ad05db-2f1b-46fa-8b4b-5d2a50ac6c8f") + ) + (fp_line + (start 0 0) + (end 2.54 0) + (stroke + (width 0.1) + (type solid) + ) + (layer "F.Fab") + (uuid "76286cb1-2984-4886-ad44-69a694c5d13f") + ) + (fp_circle + (center 0 0) + (end 0.8 0) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "173aec12-1541-4d22-b2dc-2ce2e22a79aa") + ) + (pad "1" thru_hole circle + (at 0 0 270) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 1 "Net-(D1-K)") + (pintype "passive") + (uuid "a2f44d4a-752d-4b68-aa02-fc3a04b207fa") + ) + (pad "2" thru_hole oval + (at 2.54 0 270) + (size 1.4 1.4) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 5 "Net-(C4-Pad1)") + (pintype "passive") + (uuid "fdc90a4c-2006-4549-be27-2a173bff3e6b") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Connector_Pin:Pin_D1.0mm_L10.0mm" + (layer "F.Cu") + (uuid "eb2b727b-6c46-4603-9390-f7a52a6f2750") + (at 56.86 107.9) + (descr "solder Pin_ diameter 1.0mm, hole diameter 1.0mm (press fit), length 10.0mm") + (tags "solder Pin_ press fit") + (property "Reference" "VCC_B1" + (at 0 2.25 0) + (layer "F.SilkS") + (uuid "0fcbc334-e9b5-4b03-9f5f-48d04892b842") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Value" "Conn_01x01_Pin" + (at 0 -2.05 0) + (layer "F.Fab") + (hide yes) + (uuid "d693ee10-12f0-40b1-acd0-b1f4f6a0d677") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "8deecbd9-eeca-43d6-b877-06a8d18f09a1") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Generic connector, single row, 01x01, script generated" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "03641573-8ca6-4ed3-a13c-b301b858cc21") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/6778b725-cc7e-4fa7-8d8b-1f47e2db759c") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_circle + (center 0 0) + (end 1.25 0.05) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "87fce251-3f66-46ee-9c2b-640083f0e3ef") + ) + (fp_circle + (center 0 0) + (end 1.5 0) + (stroke + (width 0.05) + (type solid) + ) + (fill no) + (layer "F.CrtYd") + (uuid "a93f1705-a556-4ce2-9fb9-5840e70a3de0") + ) + (fp_circle + (center 0 0) + (end 0.5 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "691e2d80-b959-4c7c-958d-8041b1a0f5f9") + ) + (fp_circle + (center 0 0) + (end 1 0) + (stroke + (width 0.12) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "ccdcab9c-1148-4b7c-a5cc-08cbddc04d08") + ) + (fp_text user "${REFERENCE}" + (at 0 2.25 0) + (layer "F.Fab") + (uuid "705ee86f-7b1f-4c78-b3e6-e12f18a1ff44") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" thru_hole circle + (at 0 0) + (size 2 2) + (drill 1) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 9 "Net-(D2-K)") + (pinfunction "Pin_1") + (pintype "passive") + (uuid "30eff844-c514-488d-a74f-a90181e31452") + ) + (embedded_fonts no) + (model "${KICAD6_3DMODEL_DIR}/Connector_Pin.3dshapes/Pin_D1.0mm_L10.0mm.wrl" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "C47u35v:CAPPRD200W50D525H1250" + (layer "F.Cu") + (uuid "ee1741f5-8fe9-4aef-8cfa-1bdaf9b0d7f6") + (at 67.02 118.06 -90) + (descr "5*11") + (tags "Capacitor Polarised") + (property "Reference" "C14" + (at 4.811353 -1.175692 0) + (layer "F.SilkS") + (uuid "75c77906-4dc5-4d49-9c15-83f3025923e3") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Value" "47uF 35v" + (at 0 0 90) + (layer "F.SilkS") + (hide yes) + (uuid "5bda1c20-1d50-4b9b-ab0c-0b8357e40a88") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "cd2f0c52-1b56-4348-bc8c-7959b6eb8ca9") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Polarized capacitor" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "0d5a5e64-1344-41ef-b2c2-3c12962b397e") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/028b1213-6965-4c6b-88c6-99867053371d") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_circle + (center 1 0) + (end 1 2.625) + (stroke + (width 0.2) + (type solid) + ) + (fill no) + (layer "F.SilkS") + (uuid "bc54e2fa-61af-42de-9f4f-d4840899512c") + ) + (fp_circle + (center 1 0) + (end 1 2.625) + (stroke + (width 0.1) + (type solid) + ) + (fill no) + (layer "F.Fab") + (uuid "999edf3e-b089-400a-bdea-5554c000e468") + ) + (pad "1" thru_hole rect + (at 0 0 270) + (size 1.1 1.1) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 15 "Net-(VCC_B2-Pin_1)") + (pintype "passive") + (uuid "b6101f82-1379-437b-9a34-da0e4f4c85ec") + ) + (pad "2" thru_hole circle + (at 2 0 270) + (size 1.1 1.1) + (drill 0.7) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 3 "GND") + (pintype "passive") + (uuid "88bfbde4-b27a-497d-9b8a-37ad5bce6032") + ) + (embedded_fonts no) + (model "UVZ1V470MDD1TA.stp" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "Library:conn_holepad" + (layer "F.Cu") + (uuid "f4e09da5-de11-4910-938f-ad22f422a378") + (at 77.18 156.16) + (property "Reference" "X2A1" + (at -0.002784 2.539356 0) + (unlocked yes) + (layer "F.SilkS") + (uuid "d5f4a471-ed9d-4edc-bb23-bc08bbf7bf32") + (effects + (font + (size 1 1) + (thickness 0.1) + ) + ) + ) + (property "Value" "Conn_01x01_Pin" + (at 0 1 0) + (unlocked yes) + (layer "F.Fab") + (hide yes) + (uuid "7b9076ea-7a3b-44da-9637-c3c60712ac36") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "ba197c54-7441-4c51-ae88-626016e931f5") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "Generic connector, single row, 01x01, script generated" + (at 0 0 0) + (layer "F.Fab") + (hide yes) + (uuid "0cd07fbd-c075-427e-b50f-071cec277e17") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (path "/02603ffc-8ef0-4551-98e5-69f3d0b5f5ed") + (sheetfile "retro.kicad_sch") + (attr through_hole) + (fp_text user "${REFERENCE}" + (at 0 2.5 0) + (unlocked yes) + (layer "F.Fab") + (uuid "1306ac26-2168-4d74-b747-b714a328742e") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (pad "1" thru_hole circle + (at 0 0) + (size 3 3) + (drill 1.5) + (layers "*.Cu" "*.Mask") + (remove_unused_layers no) + (net 21 "Net-(X2A1-Pin_1)") + (pinfunction "Pin_1") + (pintype "passive") + (uuid "1b13fdac-fbab-47a5-83c7-5c17e6ca715a") + ) + (embedded_fonts no) + ) + (footprint "opa1642:SOIC127P600X175-8N" + (layer "B.Cu") + (uuid "3df34ff6-6920-43a3-9389-a99a8a5a4bd9") + (at 67.02 90.12 -90) + (descr "D0008A") + (tags "Integrated Circuit") + (property "Reference" "IC2" + (at 0 0 90) + (layer "B.SilkS") + (uuid "7ab03f5b-4dbe-4043-9c09-ca81c971378b") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + (justify mirror) + ) + ) + (property "Value" "OPA1642AID" + (at 0 0 90) + (layer "B.SilkS") + (hide yes) + (uuid "21191121-0451-4bc0-8c43-6a118ab7be55") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + (justify mirror) + ) + ) + (property "Datasheet" "" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "5a923597-b701-469d-abc1-e18c1f973800") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "\n \n Dual SoundPlus™ high-performance, JFET-input audio op amp\n \n" + (at -23.1 157.14 0) + (layer "F.Fab") + (hide yes) + (uuid "f4421172-45e5-41f4-a121-4257b5e50590") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Availability" "In Stock" + (at -23.1 157.14 0) + (layer "B.Fab") + (hide yes) + (uuid "2da86e55-0385-40cb-8882-6aa4fe686ee6") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (property "Check_prices" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=eda" + (at -23.1 157.14 0) + (layer "B.Fab") + (hide yes) + (uuid "00ee88a7-d2bf-471d-aa73-9d81787a8116") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (property "MANUFACTURER" "Texas Instruments" + (at -23.1 157.14 0) + (layer "B.Fab") + (hide yes) + (uuid "5e093ee3-1678-4e95-8ddb-6353b1f84e36") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (property "MAXIMUM_PACKAGE_HEIGHT" "1.75 mm" + (at -23.1 157.14 0) + (layer "B.Fab") + (hide yes) + (uuid "9207d135-f026-4e47-a3d8-3079324d0a01") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (property "MF" "Texas Instruments" + (at -23.1 157.14 0) + (layer "B.Fab") + (hide yes) + (uuid "e792fd29-dbbb-4613-ae02-4a13a77a2e5f") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (property "MP" "OPA1642AID" + (at -23.1 157.14 0) + (layer "B.Fab") + (hide yes) + (uuid "f442a8ec-0641-481b-8df1-82b6c1b7539c") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (property "PARTREV" "D" + (at -23.1 157.14 0) + (layer "B.Fab") + (hide yes) + (uuid "2e156cf0-c18b-4a82-8362-de866b9a8d5b") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (property "Package" "SOIC-8 Texas Instruments" + (at -23.1 157.14 0) + (layer "B.Fab") + (hide yes) + (uuid "04ba0cff-3ce1-4b73-86ba-8515be5a971a") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (property "Price" "None" + (at -23.1 157.14 0) + (layer "B.Fab") + (hide yes) + (uuid "09c67899-740e-4e36-9134-2b0ac542fa10") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (property "STANDARD" "IPC 7351B" + (at -23.1 157.14 0) + (layer "B.Fab") + (hide yes) + (uuid "be56c491-bf47-4e9c-b453-94907a3a51f6") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (property "SnapEDA_Link" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=snap" + (at -23.1 157.14 0) + (layer "B.Fab") + (hide yes) + (uuid "9657d99b-6f1f-463d-a66a-b8f5a60cd3a1") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (path "/e46d3b5f-0bed-4df1-a7ff-7fb3e0496ac5") + (sheetfile "retro.kicad_sch") + (attr smd) + (fp_line + (start -3.475 2.58) + (end -1.948 2.58) + (stroke + (width 0.2) + (type solid) + ) + (layer "B.SilkS") + (uuid "4ba2e218-d66f-433a-99ce-c0aba8017f15") + ) + (fp_line + (start -1.598 2.452) + (end 1.598 2.452) + (stroke + (width 0.2) + (type solid) + ) + (layer "B.SilkS") + (uuid "131d93cb-5ed0-47be-bfc4-cc8c8360c030") + ) + (fp_line + (start 1.598 2.452) + (end 1.598 -2.452) + (stroke + (width 0.2) + (type solid) + ) + (layer "B.SilkS") + (uuid "29a50c34-9072-49c7-a0a0-9c192fb183ab") + ) + (fp_line + (start -1.598 -2.452) + (end -1.598 2.452) + (stroke + (width 0.2) + (type solid) + ) + (layer "B.SilkS") + (uuid "bcdd0f5b-e8fd-4242-a11c-667ec30e092a") + ) + (fp_line + (start 1.598 -2.452) + (end -1.598 -2.452) + (stroke + (width 0.2) + (type solid) + ) + (layer "B.SilkS") + (uuid "dbf2a3aa-479b-49e0-9ed3-b6d343f94a44") + ) + (fp_line + (start -3.725 2.75) + (end 3.725 2.75) + (stroke + (width 0.05) + (type solid) + ) + (layer "B.CrtYd") + (uuid "e3a830bd-70bf-43fa-8411-57307f60abfe") + ) + (fp_line + (start 3.725 2.75) + (end 3.725 -2.75) + (stroke + (width 0.05) + (type solid) + ) + (layer "B.CrtYd") + (uuid "257f17a2-9701-4be4-9f56-f6d7fa9d7e23") + ) + (fp_line + (start -3.725 -2.75) + (end -3.725 2.75) + (stroke + (width 0.05) + (type solid) + ) + (layer "B.CrtYd") + (uuid "33d63245-0b86-4679-846f-9f2d45d02764") + ) + (fp_line + (start 3.725 -2.75) + (end -3.725 -2.75) + (stroke + (width 0.05) + (type solid) + ) + (layer "B.CrtYd") + (uuid "5a89c354-5527-4ee0-ba60-77c7881cd971") + ) + (fp_line + (start -1.948 2.452) + (end 1.948 2.452) + (stroke + (width 0.1) + (type solid) + ) + (layer "B.Fab") + (uuid "57abdd58-59f1-4a90-8ba3-166964f27bb7") + ) + (fp_line + (start 1.948 2.452) + (end 1.948 -2.452) + (stroke + (width 0.1) + (type solid) + ) + (layer "B.Fab") + (uuid "662b0489-51c6-4ec4-b6cf-76b8bd6b6370") + ) + (fp_line + (start -1.948 1.182) + (end -0.678 2.452) + (stroke + (width 0.1) + (type solid) + ) + (layer "B.Fab") + (uuid "d5548735-46c8-45d4-83d2-7300ccccc86a") + ) + (fp_line + (start -1.948 -2.452) + (end -1.948 2.452) + (stroke + (width 0.1) + (type solid) + ) + (layer "B.Fab") + (uuid "c3bf4815-2da1-412e-98a1-e0d962eeab47") + ) + (fp_line + (start 1.948 -2.452) + (end -1.948 -2.452) + (stroke + (width 0.1) + (type solid) + ) + (layer "B.Fab") + (uuid "cf79f700-d51a-4ec9-b719-038b079e3b22") + ) + (fp_text user "${REFERENCE}" + (at 0 0 90) + (layer "B.Fab") + (uuid "67213649-116b-44b4-a016-908d30e19bf3") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + (justify mirror) + ) + ) + (pad "1" smd rect + (at -2.711 1.905 180) + (size 0.65 1.528) + (layers "B.Cu" "B.Mask" "B.Paste") + (net 13 "Net-(C11-Pad2)") + (pintype "output") + (uuid "2fbfacf1-4eb5-40c6-bb8b-0f91dcc18e05") + ) + (pad "2" smd rect + (at -2.711 0.635 180) + (size 0.65 1.528) + (layers "B.Cu" "B.Mask" "B.Paste") + (net 13 "Net-(C11-Pad2)") + (pintype "input") + (uuid "778b80fd-e950-42d3-8fac-7497a66155cd") + ) + (pad "3" smd rect + (at -2.711 -0.635 180) + (size 0.65 1.528) + (layers "B.Cu" "B.Mask" "B.Paste") + (net 18 "Net-(SGNL_B1-Pin_1)") + (pintype "input") + (uuid "b6284a84-3a51-44fb-a8b8-477ad4f72f15") + ) + (pad "4" smd rect + (at -2.711 -1.905 180) + (size 0.65 1.528) + (layers "B.Cu" "B.Mask" "B.Paste") + (net 3 "GND") + (pintype "power_in") + (uuid "5404bce7-efa6-4418-852d-fa6f13572326") + ) + (pad "5" smd rect + (at 2.711 -1.905 180) + (size 0.65 1.528) + (layers "B.Cu" "B.Mask" "B.Paste") + (net 14 "Net-(C12-Pad1)") + (pintype "input") + (uuid "1ce196e2-76b3-456b-89af-f5c8710a9ca6") + ) + (pad "6" smd rect + (at 2.711 -0.635 180) + (size 0.65 1.528) + (layers "B.Cu" "B.Mask" "B.Paste") + (net 19 "Net-(IC2-Pad6)") + (pintype "input") + (uuid "3f001d35-b3f1-4d1c-bff8-c4562d7faed2") + ) + (pad "7" smd rect + (at 2.711 0.635 180) + (size 0.65 1.528) + (layers "B.Cu" "B.Mask" "B.Paste") + (net 11 "Net-(C10-Pad2)") + (pintype "output") + (uuid "a4088c01-4b23-4e86-ad63-95bdb41b011c") + ) + (pad "8" smd rect + (at 2.711 1.905 180) + (size 0.65 1.528) + (layers "B.Cu" "B.Mask" "B.Paste") + (net 15 "Net-(VCC_B2-Pin_1)") + (pintype "power_in") + (uuid "cdda338b-07c9-42fb-acce-81d9ace24aff") + ) + (embedded_fonts no) + (model "OPA1642AID.stp" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (footprint "opa1642:SOIC127P600X175-8N" + (layer "B.Cu") + (uuid "7cf4c0a4-a134-4e2d-a9f4-d4f0335ad8a0") + (at 77.18 90.12 -90) + (descr "D0008A") + (tags "Integrated Circuit") + (property "Reference" "IC1" + (at 0 0 90) + (layer "B.SilkS") + (uuid "48fcb5a8-de4a-49ed-9c39-0a45edaf5644") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + (justify mirror) + ) + ) + (property "Value" "OPA1642AID" + (at 0 0 90) + (layer "B.SilkS") + (hide yes) + (uuid "e980c6f1-3dd5-41e4-aff4-881a7810fd3b") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + (justify mirror) + ) + ) + (property "Datasheet" "" + (at 0 0 270) + (layer "F.Fab") + (hide yes) + (uuid "c25cbc4a-6bd4-47ad-8536-876aabb6d0c9") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Description" "\n \n Dual SoundPlus™ high-performance, JFET-input audio op amp\n \n" + (at -12.94 167.3 0) + (layer "F.Fab") + (hide yes) + (uuid "362e886b-7522-4564-88c0-e6f2917b2548") + (effects + (font + (size 1.27 1.27) + (thickness 0.15) + ) + ) + ) + (property "Availability" "In Stock" + (at -12.94 167.3 0) + (layer "B.Fab") + (hide yes) + (uuid "4fe48375-9213-43fd-a3ce-cbe43114d3b2") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (property "Check_prices" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=eda" + (at -12.94 167.3 0) + (layer "B.Fab") + (hide yes) + (uuid "d381481c-5896-4038-baf7-505d803e730a") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (property "MANUFACTURER" "Texas Instruments" + (at -12.94 167.3 0) + (layer "B.Fab") + (hide yes) + (uuid "0c1f3624-879c-40c8-a2a2-fb4ed2f16dd5") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (property "MAXIMUM_PACKAGE_HEIGHT" "1.75 mm" + (at -12.94 167.3 0) + (layer "B.Fab") + (hide yes) + (uuid "c87ee3be-0baf-4270-8f78-6ee7cb023b31") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (property "MF" "Texas Instruments" + (at -12.94 167.3 0) + (layer "B.Fab") + (hide yes) + (uuid "a148a76a-f356-4cd5-b970-cbd7c0f77c07") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (property "MP" "OPA1642AID" + (at -12.94 167.3 0) + (layer "B.Fab") + (hide yes) + (uuid "4b9a4eb3-7e0d-4821-a763-d451291003a7") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (property "PARTREV" "D" + (at -12.94 167.3 0) + (layer "B.Fab") + (hide yes) + (uuid "02826c73-af98-4f56-9a79-20c8447c991c") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (property "Package" "SOIC-8 Texas Instruments" + (at -12.94 167.3 0) + (layer "B.Fab") + (hide yes) + (uuid "5d915c3f-df9a-4702-90c8-92581aff5b87") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (property "Price" "None" + (at -12.94 167.3 0) + (layer "B.Fab") + (hide yes) + (uuid "846aed56-fd05-4dec-b518-44bcb04a0039") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (property "STANDARD" "IPC 7351B" + (at -12.94 167.3 0) + (layer "B.Fab") + (hide yes) + (uuid "53aeea43-86bc-46b2-b9c9-f8cf01106cbb") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (property "SnapEDA_Link" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=snap" + (at -12.94 167.3 0) + (layer "B.Fab") + (hide yes) + (uuid "90ae0200-2606-4851-816c-c327503b58f5") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + (justify mirror) + ) + ) + (path "/adb405c9-094f-4a77-a219-d4048679141c") + (sheetfile "retro.kicad_sch") + (attr smd) + (fp_line + (start -3.475 2.58) + (end -1.948 2.58) + (stroke + (width 0.2) + (type solid) + ) + (layer "B.SilkS") + (uuid "4987cd9b-409e-4639-95b2-7988f6efac41") + ) + (fp_line + (start -1.598 2.452) + (end 1.598 2.452) + (stroke + (width 0.2) + (type solid) + ) + (layer "B.SilkS") + (uuid "e1d8020f-32ec-488c-8482-4347981fbbf2") + ) + (fp_line + (start 1.598 2.452) + (end 1.598 -2.452) + (stroke + (width 0.2) + (type solid) + ) + (layer "B.SilkS") + (uuid "f18e4cd9-d7e6-46b3-ac9f-9c7ce5d20559") + ) + (fp_line + (start -1.598 -2.452) + (end -1.598 2.452) + (stroke + (width 0.2) + (type solid) + ) + (layer "B.SilkS") + (uuid "077c0592-6626-4af3-842c-207009d40bb7") + ) + (fp_line + (start 1.598 -2.452) + (end -1.598 -2.452) + (stroke + (width 0.2) + (type solid) + ) + (layer "B.SilkS") + (uuid "7dd04dc5-0d6d-4f9c-8c6b-ab7bb6b47523") + ) + (fp_line + (start -3.725 2.75) + (end 3.725 2.75) + (stroke + (width 0.05) + (type solid) + ) + (layer "B.CrtYd") + (uuid "ab2f59ea-310d-4b7f-8328-3c4a915d4b49") + ) + (fp_line + (start 3.725 2.75) + (end 3.725 -2.75) + (stroke + (width 0.05) + (type solid) + ) + (layer "B.CrtYd") + (uuid "8a69ea1e-3605-442c-873c-c3877c9e2571") + ) + (fp_line + (start -3.725 -2.75) + (end -3.725 2.75) + (stroke + (width 0.05) + (type solid) + ) + (layer "B.CrtYd") + (uuid "4266a81e-f548-41f9-8523-14e6db9e1724") + ) + (fp_line + (start 3.725 -2.75) + (end -3.725 -2.75) + (stroke + (width 0.05) + (type solid) + ) + (layer "B.CrtYd") + (uuid "abd35881-88a4-4be3-a67e-31363880025e") + ) + (fp_line + (start -1.948 2.452) + (end 1.948 2.452) + (stroke + (width 0.1) + (type solid) + ) + (layer "B.Fab") + (uuid "2333be59-73ae-483a-9836-ef610aaddd14") + ) + (fp_line + (start 1.948 2.452) + (end 1.948 -2.452) + (stroke + (width 0.1) + (type solid) + ) + (layer "B.Fab") + (uuid "f3a72be3-480c-48cb-86f1-9b74814ffaae") + ) + (fp_line + (start -1.948 1.182) + (end -0.678 2.452) + (stroke + (width 0.1) + (type solid) + ) + (layer "B.Fab") + (uuid "5b15ff4f-b94b-4329-93a6-97c742c07889") + ) + (fp_line + (start -1.948 -2.452) + (end -1.948 2.452) + (stroke + (width 0.1) + (type solid) + ) + (layer "B.Fab") + (uuid "f9dc7044-1345-4c74-8392-92bcdaf4f525") + ) + (fp_line + (start 1.948 -2.452) + (end -1.948 -2.452) + (stroke + (width 0.1) + (type solid) + ) + (layer "B.Fab") + (uuid "6f8697fd-e0da-45e5-a0bb-6a6308141d72") + ) + (fp_text user "${REFERENCE}" + (at 0 0 90) + (layer "B.Fab") + (uuid "d46ea488-78be-483c-9644-e4f51b81e21d") + (effects + (font + (size 1.27 1.27) + (thickness 0.254) + ) + (justify mirror) + ) + ) + (pad "1" smd rect + (at -2.711 1.905 180) + (size 0.65 1.528) + (layers "B.Cu" "B.Mask" "B.Paste") + (net 6 "Net-(C4-Pad2)") + (pintype "output") + (uuid "de8d7992-cea7-4454-bef2-0ae393fe4429") + ) + (pad "2" smd rect + (at -2.711 0.635 180) + (size 0.65 1.528) + (layers "B.Cu" "B.Mask" "B.Paste") + (net 6 "Net-(C4-Pad2)") + (pintype "input") + (uuid "97fbe7d0-32c8-47ef-85ae-e696bcb0104b") + ) + (pad "3" smd rect + (at -2.711 -0.635 180) + (size 0.65 1.528) + (layers "B.Cu" "B.Mask" "B.Paste") + (net 16 "Net-(SGNL_A1-Pin_1)") + (pintype "input") + (uuid "82632c34-11fe-46c8-91a9-46ac8f926739") + ) + (pad "4" smd rect + (at -2.711 -1.905 180) + (size 0.65 1.528) + (layers "B.Cu" "B.Mask" "B.Paste") + (net 3 "GND") + (pintype "power_in") + (uuid "2fbbe455-206b-4f3b-8542-5880a65d816a") + ) + (pad "5" smd rect + (at 2.711 -1.905 180) + (size 0.65 1.528) + (layers "B.Cu" "B.Mask" "B.Paste") + (net 7 "Net-(C5-Pad1)") + (pintype "input") + (uuid "d4532c89-058b-49c5-ac06-59239cb28bbf") + ) + (pad "6" smd rect + (at 2.711 -0.635 180) + (size 0.65 1.528) + (layers "B.Cu" "B.Mask" "B.Paste") + (net 17 "Net-(IC1-Pad6)") + (pintype "input") + (uuid "6faf1d0f-8776-42a8-b7bb-c08c8260601f") + ) + (pad "7" smd rect + (at 2.711 0.635 180) + (size 0.65 1.528) + (layers "B.Cu" "B.Mask" "B.Paste") + (net 4 "Net-(C3-Pad2)") + (pintype "output") + (uuid "e52b3a68-d4f8-4520-b5fa-c78e4d4231ae") + ) + (pad "8" smd rect + (at 2.711 1.905 180) + (size 0.65 1.528) + (layers "B.Cu" "B.Mask" "B.Paste") + (net 8 "Net-(VCC_A2-Pin_1)") + (pintype "power_in") + (uuid "4acc962d-aee4-4b2e-925c-89282e018113") + ) + (embedded_fonts no) + (model "OPA1642AID.stp" + (offset + (xyz 0 0 0) + ) + (scale + (xyz 1 1 1) + ) + (rotate + (xyz 0 0 0) + ) + ) + ) + (gr_circle + (center 57.495 77.591) + (end 55.241385 77.629116) + (stroke + (width 0.15) + (type default) + ) + (fill no) + (layer "F.SilkS") + (uuid "d78a8605-0faa-45b0-a883-fb5ba757e10d") + ) + (gr_circle + (center 86.495385 77.591) + (end 84.22977 77.629116) + (stroke + (width 0.15) + (type default) + ) + (fill no) + (layer "F.SilkS") + (uuid "74ba7f71-dc4b-4851-9c33-6c55ed8714ba") + ) + (gr_arc + (start 51.155914 66.091802) + (mid 51.529759 65.189328) + (end 52.432248 64.815468) + (stroke + (width 0.1) + (type default) + ) + (layer "Edge.Cuts") + (uuid "88ecc551-e657-45ea-9528-c0f9a0a6a25d") + ) + (gr_line + (start 51.155914 66.091802) + (end 54.923769 156.333) + (stroke + (width 0.1) + (type default) + ) + (layer "Edge.Cuts") + (uuid "c840ab66-863d-4edf-8993-ecb9072a5357") + ) + (gr_line + (start 52.432248 64.815468) + (end 91.578521 64.817237) + (stroke + (width 0.1) + (type default) + ) + (layer "Edge.Cuts") + (uuid "33d19db6-c008-49ec-97b4-4d648cf0e5a2") + ) + (gr_line + (start 55.015769 156.333) + (end 54.923769 156.333) + (stroke + (width 0.1) + (type default) + ) + (layer "Edge.Cuts") + (uuid "00c33ccb-8250-48c5-86b2-2bf2450fe837") + ) + (gr_arc + (start 55.015769 156.333) + (mid 57.106138 157.198853) + (end 57.972 159.289231) + (stroke + (width 0.1) + (type default) + ) + (layer "Edge.Cuts") + (uuid "bec32d07-79ec-4cb1-a483-8aabd22cc57b") + ) + (gr_line + (start 57.972 159.289231) + (end 86.038769 159.291) + (stroke + (width 0.1) + (type default) + ) + (layer "Edge.Cuts") + (uuid "492a0e52-3505-4eff-b233-23a6f27b5c18") + ) + (gr_arc + (start 86.038769 159.291) + (mid 86.904653 157.200674) + (end 88.995 156.334769) + (stroke + (width 0.1) + (type default) + ) + (layer "Edge.Cuts") + (uuid "cede8dad-cd64-44e3-9657-2ee8823340ac") + ) + (gr_line + (start 88.995 156.334769) + (end 89.087 156.334769) + (stroke + (width 0.1) + (type default) + ) + (layer "Edge.Cuts") + (uuid "7ddecae6-4c4b-42b0-bab0-5e26d93e32e6") + ) + (gr_arc + (start 91.578521 64.817237) + (mid 92.481003 65.191089) + (end 92.854855 66.093571) + (stroke + (width 0.1) + (type default) + ) + (layer "Edge.Cuts") + (uuid "455ddf0d-7497-49f4-92c2-28e3811e4ba9") + ) + (gr_line + (start 92.854855 66.093571) + (end 89.087 156.334769) + (stroke + (width 0.1) + (type default) + ) + (layer "Edge.Cuts") + (uuid "f2ed6753-d7ba-4ccc-ab01-db834b2589fd") + ) + (gr_text "senke 2025" + (at 90.063107 105.686999 90) + (layer "F.Cu" knockout) + (uuid "81178e4f-6204-475d-9d9f-29553ce9a21b") + (effects + (font + (size 1 1) + (thickness 0.25) + (bold yes) + ) + (justify left bottom) + ) + ) + (gr_text "capsule" + (at 67.482734 67.292707 0) + (layer "F.Cu" knockout) + (uuid "f3c31054-420d-4d95-8d93-ef87df79b9ce") + (effects + (font + (size 1.5 1.5) + (thickness 0.3) + (bold yes) + (italic yes) + ) + (justify left bottom) + ) + ) + (gr_text "XLR" + (at 69.789193 153.371392 0) + (layer "F.Cu" knockout) + (uuid "367109ff-45e2-4dd4-a867-67d045227ac0") + (effects + (font + (size 1.5 1.5) + (thickness 0.3) + (bold yes) + (italic yes) + ) + (justify left bottom) + ) + ) + (gr_text "talas.fr" + (at 88.216471 105.351247 90) + (layer "F.Cu" knockout) + (uuid "d09b2539-7373-4473-a5f0-c8459ea8232d") + (effects + (font + (size 1.5 1.5) + (thickness 0.3) + (bold yes) + ) + (justify left bottom) + ) + ) + (gr_text "GND_B1" + (at 54.221358 72.707931 0) + (layer "F.SilkS") + (uuid "8e34020d-ee90-4bea-acee-401facaca816") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (gr_text "VCC_B2" + (at 60.571358 72.707931 0) + (layer "F.SilkS") + (uuid "45eb5003-35fc-42b1-b550-d82b87dc2308") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (gr_text "SGNL_B1" + (at 66.921358 72.707931 0) + (layer "F.SilkS") + (uuid "7199f138-4675-4532-802c-8a270467b896") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (gr_text "SGNL_A1" + (at 77.081358 72.707931 0) + (layer "F.SilkS") + (uuid "ca1ce028-c4b6-4e6d-8613-a3acf2c1d838") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (gr_text "VCC_A2" + (at 83.431358 72.707931 0) + (layer "F.SilkS") + (uuid "e096f130-20bb-4a15-b169-12682ad3daa8") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (gr_text "GND_A1" + (at 89.781358 72.707931 0) + (layer "F.SilkS") + (uuid "13144784-7da2-4b4e-8378-dfc12272a967") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (gr_text "GND_B1" + (at 54.221358 72.707931 0) + (layer "F.Fab") + (uuid "f822b50d-810f-4469-a3b4-13f7ecdb3896") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (gr_text "VCC_B2" + (at 60.571358 72.707931 0) + (layer "F.Fab") + (uuid "7d8d8aa4-9316-4eb8-8e65-366793df64c3") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (gr_text "SGNL_B1" + (at 66.921358 72.707931 0) + (layer "F.Fab") + (uuid "f5fd0f85-7d20-48ef-9e08-f1615af2a5b0") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (gr_text "SGNL_A1" + (at 77.081358 72.707931 0) + (layer "F.Fab") + (uuid "77aab8de-1485-43a0-8253-6813f49783a1") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (gr_text "VCC_A2" + (at 83.431358 72.707931 0) + (layer "F.Fab") + (uuid "a362efc1-93b0-498c-a9b5-5ad8e9dde368") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (gr_text "GND_A1" + (at 89.781358 72.707931 0) + (layer "F.Fab") + (uuid "da20e25f-bcc9-4b72-9cae-1c851ad01816") + (effects + (font + (size 1 1) + (thickness 0.15) + ) + ) + ) + (segment + (start 82.26 108.927) + (end 81.2013 109.986) + (width 0.25) + (layer "F.Cu") + (net 1) + (uuid "033ed2bb-8469-4304-85c0-bf1822acd097") + ) + (segment + (start 87.34 115.52) + (end 87.34 120.6) + (width 0.25) + (layer "F.Cu") + (net 1) + (uuid "5b7910c5-b356-43cf-93e4-9129027fce53") + ) + (segment + (start 81.2013 114.461) + (end 82.26 115.52) + (width 0.25) + (layer "F.Cu") + (net 1) + (uuid "6ceba954-2229-49e6-955d-305504d99db7") + ) + (segment + (start 82.26 120.6) + (end 82.26 115.52) + (width 0.25) + (layer "F.Cu") + (net 1) + (uuid "8f976c81-d877-4384-a08c-3ca17cafc9a7") + ) + (segment + (start 81.2013 109.986) + (end 81.2013 114.461) + (width 0.25) + (layer "F.Cu") + (net 1) + (uuid "947eee9b-2039-4bfc-96c8-2b3f72776459") + ) + (segment + (start 82.26 107.9) + (end 82.26 108.927) + (width 0.25) + (layer "F.Cu") + (net 1) + (uuid "f0123df6-f5c1-44e7-b1b5-db88687f71b8") + ) + (segment + (start 78.0569 124.803) + (end 82.26 120.6) + (width 0.25) + (layer "B.Cu") + (net 1) + (uuid "0f933596-8e11-4139-b28f-3d53e2b65e8f") + ) + (segment + (start 77.18 125.68) + (end 77.18 124.803) + (width 0.25) + (layer "B.Cu") + (net 1) + (uuid "43b6479b-b5e7-4c93-a126-9d36bedc1575") + ) + (segment + (start 77.18 124.803) + (end 78.0569 124.803) + (width 0.25) + (layer "B.Cu") + (net 1) + (uuid "468ff319-7061-4497-9d76-148f0a46bce9") + ) + (segment + (start 87.34 115.52) + (end 82.26 115.52) + (width 0.25) + (layer "B.Cu") + (net 1) + (uuid "e8ed593d-4fde-4ca5-973b-825aa6c34f02") + ) + (segment + (start 82.26 107.9) + (end 87.34 107.9) + (width 0.25) + (layer "B.Cu") + (net 1) + (uuid "f2e1bcf5-7192-4f9b-84ac-cab1a56402ee") + ) + (segment + (start 87.34 123.14) + (end 87.34 128.22) + (width 0.25) + (layer "F.Cu") + (net 2) + (uuid "5f1b3636-cc0a-4b84-b10d-87032e3c549a") + ) + (segment + (start 77.18 145.036) + (end 85.8254 136.39) + (width 0.25) + (layer "B.Cu") + (net 2) + (uuid "3de93b22-4b07-4749-9b80-faadfb0dfe41") + ) + (segment + (start 85.8254 136.39) + (end 85.8254 129.735) + (width 0.25) + (layer "B.Cu") + (net 2) + (uuid "611ec917-5917-421b-a96c-cdce32b8428f") + ) + (segment + (start 85.8254 129.735) + (end 87.34 128.22) + (width 0.25) + (layer "B.Cu") + (net 2) + (uuid "6acbe092-0b0d-48bc-84b6-882d58d868b0") + ) + (segment + (start 77.18 146) + (end 77.18 145.036) + (width 0.25) + (layer "B.Cu") + (net 2) + (uuid "737fa8f5-9acd-46ae-89c3-8976c3b7cd30") + ) + (segment + (start 64.0947 113.62) + (end 64.0947 117.135) + (width 0.25) + (layer "F.Cu") + (net 3) + (uuid "011514d0-e73c-4507-8bee-ecb4698c5cf8") + ) + (segment + (start 58.3134 107.839) + (end 64.0947 113.62) + (width 0.25) + (layer "F.Cu") + (net 3) + (uuid "18621ccc-97d1-422b-a191-1af0d6a3d70c") + ) + (segment + (start 69.02 88.8035) + (end 65.4765 85.26) + (width 0.25) + (layer "F.Cu") + (net 3) + (uuid "1ea53e3a-3a03-4959-9693-6513bbb2a06a") + ) + (segment + (start 78.0569 126.803) + (end 78.0569 111.317) + (width 0.25) + (layer "F.Cu") + (net 3) + (uuid "209b7696-56e1-4224-af84-7fd6d1d04f56") + ) + (segment + (start 64.0947 117.135) + (end 67.02 120.06) + (width 0.25) + (layer "F.Cu") + (net 3) + (uuid "27ab4cda-0b13-471f-9f30-93674f24404f") + ) + (segment + (start 59.4 87.58) + (end 59.4 88.6069) + (width 0.25) + (layer "F.Cu") + (net 3) + (uuid "3bd23884-6659-4488-9734-e307f95f4561") + ) + (segment + (start 59.4 88.6069) + (end 58.3134 89.6935) + (width 0.25) + (layer "F.Cu") + (net 3) + (uuid "3ca0f2c6-e7ac-4621-9547-60df783c3c76") + ) + (segment + (start 72.1 132.76) + (end 72.1 156.16) + (width 0.25) + (layer "F.Cu") + (net 3) + (uuid "4a57c764-e240-44fe-9e4a-a44909338814") + ) + (segment + (start 62.92 85.26) + (end 62.42 85.76) + (width 0.25) + (layer "F.Cu") + (net 3) + (uuid "62925fb2-2034-4a89-890c-723060adf64a") + ) + (segment + (start 54.32 90.12) + (end 52.69 88.49) + (width 0.25) + (layer "F.Cu") + (net 3) + (uuid "8a063b81-c04a-45fa-a1d0-37a4b91aa557") + ) + (segment + (start 77.18 127.68) + (end 72.1 132.76) + (width 0.25) + (layer "F.Cu") + (net 3) + (uuid "9450e8b7-97b0-4fef-b6c2-09de9444a4da") + ) + (segment + (start 52.69 88.49) + (end 52.69 71.43) + (width 0.25) + (layer "F.Cu") + (net 3) + (uuid "9e2e9213-6763-48c0-967c-31cb121ee944") + ) + (segment + (start 65.4765 85.26) + (end 62.92 85.26) + (width 0.25) + (layer "F.Cu") + (net 3) + (uuid "a8d366dd-9c28-4cf5-8b0c-6c5c75263d45") + ) + (segment + (start 78.0569 111.317) + (end 77.18 110.44) + (width 0.25) + (layer "F.Cu") + (net 3) + (uuid "ab78860f-29ed-46ac-886f-71b5cbc58123") + ) + (segment + (start 62.42 89.961187) + (end 60.095148 92.286039) + (width 0.25) + (layer "F.Cu") + (net 3) + (uuid "bde925c7-61e6-43f7-963c-54b2758ba7ab") + ) + (segment + (start 62.42 85.76) + (end 62.42 89.961187) + (width 0.25) + (layer "F.Cu") + (net 3) + (uuid "c6eabf49-37df-4769-9bf4-68a3c7d6d9ad") + ) + (segment + (start 69.02 110.44) + (end 69.02 88.8035) + (width 0.25) + (layer "F.Cu") + (net 3) + (uuid "d0570697-78d4-43c6-99c2-8047b7716482") + ) + (segment + (start 52.69 71.43) + (end 54.32 69.8) + (width 0.25) + (layer "F.Cu") + (net 3) + (uuid "d4631fd8-c765-48e9-b922-c1bd07952ee4") + ) + (segment + (start 58.3134 89.6935) + (end 58.3134 107.839) + (width 0.25) + (layer "F.Cu") + (net 3) + (uuid "f26086f4-295c-444a-b07e-f5b1beeede6b") + ) + (segment + (start 77.18 127.68) + (end 78.0569 126.803) + (width 0.25) + (layer "F.Cu") + (net 3) + (uuid "f900bd41-8a8e-4cc2-9459-860be8914972") + ) + (via + (at 69.02 88.8035) + (size 0.8) + (drill 0.4) + (layers "F.Cu" "B.Cu") + (net 3) + (uuid "129a9b89-5231-41d6-b6b7-0b4c17a0b92c") + ) + (via + (at 60.095148 92.286039) + (size 0.8) + (drill 0.4) + (layers "F.Cu" "B.Cu") + (net 3) + (uuid "1fae0adb-002a-477a-9d38-b1293b358999") + ) + (segment + (start 89.88 87.58) + (end 91.51 85.95) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "020e3c31-f49e-4bf8-afb1-a3378dbe861b") + ) + (segment + (start 79.085 87.409) + (end 79.085 87.6903) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "029076ff-0072-4ee6-8e0d-7d0a4bb36558") + ) + (segment + (start 68.925 88.4999) + (end 68.925 87.409) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "0432c1c9-9c7b-434c-8df5-f1b8cd7c2a11") + ) + (segment + (start 79.085 87.6903) + (end 78.2754 88.4999) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "0530d8a5-231e-4b26-8bab-e4534cf5b4d0") + ) + (segment + (start 67.02 120.06) + (end 77.18 120.06) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "08323eb8-51d0-445e-876a-d6a559a18f87") + ) + (segment + (start 61.94 112.98) + (end 56.86 112.98) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "10c684c4-384b-4bb1-9802-27a017234b10") + ) + (segment + (start 69.9247 109.535) + (end 69.02 110.44) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "200f0b78-46d3-4086-ba11-e7c9fdef8ef3") + ) + (segment + (start 67.02 127.68) + (end 77.18 127.68) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "206855e3-6ef7-4f28-be50-ae130a134168") + ) + (segment + (start 89.88 87.58) + (end 88.995 86.695) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "2b3a4b4c-dc26-4ea9-a6ce-f3d40a36d287") + ) + (segment + (start 69.02 88.4999) + (end 69.02 88.8035) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "3795d412-e14a-41e8-8f49-ab7d279b549d") + ) + (segment + (start 82.3471 90.0729) + (end 84.8 87.62) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "39477db4-ebc9-4055-8bdf-e52fb8d0bda8") + ) + (segment + (start 66.48 112.98) + (end 61.94 112.98) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "5bc49640-0fb6-45cf-86f7-949f08b8f773") + ) + (segment + (start 62.9198 90.0729) + (end 82.3471 90.0729) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "62811476-ee45-4e1f-b41b-4f7210083eb8") + ) + (segment + (start 69.02 110.44) + (end 66.48 112.98) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "630ccbc0-97c6-498c-b9fb-b76aec5abe5a") + ) + (segment + (start 77.18 110.44) + (end 76.2753 109.535) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "6b04eb24-4d04-4fbc-8f8b-fecd472cb035") + ) + (segment + (start 59.4 87.58) + (end 60.4269 87.58) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "7e5dc6c4-f876-4f74-b4c1-a48b6f4862b1") + ) + (segment + (start 69.02 88.4999) + (end 68.925 88.4999) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "89a8cd68-57ef-456b-9590-bd7f0c4ad535") + ) + (segment + (start 91.51 71.43) + (end 89.88 69.8) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "8c90b011-8b8c-400f-95d3-7f69d18891db") + ) + (segment + (start 76.2753 109.535) + (end 69.9247 109.535) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "b0b7525a-365f-4a95-a51a-0538227cfddc") + ) + (segment + (start 91.51 85.95) + (end 91.51 71.43) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "b68031b4-f189-46ec-86f8-7deeadf0408b") + ) + (segment + (start 56.486039 92.286039) + (end 54.32 90.12) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "bc108439-51a0-405a-8800-1d928eeebab0") + ) + (segment + (start 79.72 112.98) + (end 77.18 110.44) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "bf74106a-38d0-4ac9-894b-b3257172b551") + ) + (segment + (start 78.2754 88.4999) + (end 69.02 88.4999) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "c61e81df-31c9-4137-9809-73b07d0f6924") + ) + (segment + (start 82.26 112.98) + (end 79.72 112.98) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "d581192b-5ad9-44e8-8c5c-a8e50245b8ee") + ) + (segment + (start 60.095148 92.286039) + (end 56.486039 92.286039) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "e6c6c8af-431d-44e3-80e5-8bf5b73c9e7b") + ) + (segment + (start 79.799 86.695) + (end 79.085 87.409) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "ea06388d-501b-40d4-a754-9214f9986ba8") + ) + (segment + (start 88.995 86.695) + (end 79.799 86.695) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "ecf260d7-8e62-49eb-b41d-e130e4bfcac0") + ) + (segment + (start 60.4269 87.58) + (end 62.9198 90.0729) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "fed4ad18-75fd-4576-b8e0-3843781eaf50") + ) + (segment + (start 87.34 112.98) + (end 82.26 112.98) + (width 0.25) + (layer "B.Cu") + (net 3) + (uuid "ffd8f634-a55d-4ffa-b2c2-db6a48589650") + ) + (segment + (start 81.6611 131.613) + (end 80.7494 130.702) + (width 0.25) + (layer "F.Cu") + (net 4) + (uuid "41914ef8-2b70-4516-8b91-8d4a1c6ad113") + ) + (segment + (start 80.7494 99.7963) + (end 79.72 98.7669) + (width 0.25) + (layer "F.Cu") + (net 4) + (uuid "44f9646d-9bb7-4aa7-8f3b-13190119d9e3") + ) + (segment + (start 81.6611 145.019) + (end 81.6611 131.613) + (width 0.25) + (layer "F.Cu") + (net 4) + (uuid "573a7f29-8016-4176-9747-7bb9b08d1bbc") + ) + (segment + (start 80.68 146) + (end 81.6611 145.019) + (width 0.25) + (layer "F.Cu") + (net 4) + (uuid "64ca9b3b-9090-4837-b7d7-2062f1c94b8d") + ) + (segment + (start 80.7494 130.702) + (end 80.7494 99.7963) + (width 0.25) + (layer "F.Cu") + (net 4) + (uuid "7fb442c0-5ad0-403d-8b4b-4fc69a0296fe") + ) + (segment + (start 79.72 98.7669) + (end 79.72 97.74) + (width 0.25) + (layer "F.Cu") + (net 4) + (uuid "ce845281-4dd4-45e5-8e01-fed6dd598892") + ) + (segment + (start 76.1222 94.3447) + (end 76.545 93.9219) + (width 0.25) + (layer "B.Cu") + (net 4) + (uuid "5ee15710-e1f9-427f-a849-9bca30ae3891") + ) + (segment + (start 77.636 98.7971) + (end 76.729 98.7971) + (width 0.25) + (layer "B.Cu") + (net 4) + (uuid "6a28c046-4bde-4928-829f-220e428921e7") + ) + (segment + (start 79.72 97.74) + (end 78.6931 97.74) + (width 0.25) + (layer "B.Cu") + (net 4) + (uuid "bfe7d129-aa68-4bf4-acb8-3382809ad7b2") + ) + (segment + (start 78.6931 97.74) + (end 77.636 98.7971) + (width 0.25) + (layer "B.Cu") + (net 4) + (uuid "c041df09-87bc-4514-ba24-8502e2981e0b") + ) + (segment + (start 76.729 98.7971) + (end 76.1222 98.1903) + (width 0.25) + (layer "B.Cu") + (net 4) + (uuid "c7bf2868-9744-4d90-ae42-781f22730798") + ) + (segment + (start 76.1222 98.1903) + (end 76.1222 94.3447) + (width 0.25) + (layer "B.Cu") + (net 4) + (uuid "ec9df18b-c318-4a01-b823-7386bafb5273") + ) + (segment + (start 76.545 93.9219) + (end 76.545 92.831) + (width 0.25) + (layer "B.Cu") + (net 4) + (uuid "ff9a395c-2705-4936-a7a2-3124e4d8609e") + ) + (segment + (start 82.26 123.14) + (end 82.26 128.22) + (width 0.25) + (layer "F.Cu") + (net 5) + (uuid "b0159e10-7e34-4899-8e29-f6ae0eb2a7ae") + ) + (segment + (start 77.18 135.84) + (end 77.18 133.3) + (width 0.25) + (layer "B.Cu") + (net 5) + (uuid "14098f69-dbc8-4e6c-899a-833c4bd5d92f") + ) + (segment + (start 77.18 133.3) + (end 82.26 128.22) + (width 0.25) + (layer "B.Cu") + (net 5) + (uuid "1918a999-926d-40c9-b091-a03b127d731e") + ) + (segment + (start 55.385 117.185431) + (end 60.915 122.715431) + (width 0.25) + (layer "B.Cu") + (net 6) + (uuid "20485865-867d-4b6e-98a7-6a1a46f1d983") + ) + (segment + (start 58.314035 81.5) + (end 52.845 86.969035) + (width 0.25) + (layer "B.Cu") + (net 6) + (uuid "22ffb634-55ca-47d8-b35e-94df96630623") + ) + (segment + (start 79.7175 136.8025) + (end 80.68 135.84) + (width 0.25) + (layer "B.Cu") + (net 6) + (uuid "266a9e0a-3ca9-4df3-a74c-b8f0d69b6020") + ) + (segment + (start 75.275 87.409) + (end 76.545 87.409) + (width 0.25) + (layer "B.Cu") + (net 6) + (uuid "36256fb9-19d6-452d-99bf-3a8b4324e23c") + ) + (segment + (start 65.695 135.876181) + (end 66.621319 136.8025) + (width 0.25) + (layer "B.Cu") + (net 6) + (uuid "76b279f3-e785-4e8d-801d-41915b93b12c") + ) + (segment + (start 65.695 128.344569) + (end 65.695 135.876181) + (width 0.25) + (layer "B.Cu") + (net 6) + (uuid "8bec5deb-cd89-47d6-8882-b501fbe0a891") + ) + (segment + (start 70.636 81.5) + (end 58.314035 81.5) + (width 0.25) + (layer "B.Cu") + (net 6) + (uuid "93d90ac5-1a43-4783-a9e9-95d1bfca4ee4") + ) + (segment + (start 76.545 87.409) + (end 70.636 81.5) + (width 0.25) + (layer "B.Cu") + (net 6) + (uuid "a1f48c80-8a07-4d52-a1dd-172340092c19") + ) + (segment + (start 52.845 86.969035) + (end 52.845 91.821396) + (width 0.25) + (layer "B.Cu") + (net 6) + (uuid "a26eb255-0042-4be1-86c4-462b15cb981a") + ) + (segment + (start 55.385 94.361396) + (end 55.385 117.185431) + (width 0.25) + (layer "B.Cu") + (net 6) + (uuid "a8a5c44a-7f62-4317-b64f-b6fdb6ea42b4") + ) + (segment + (start 52.845 91.821396) + (end 55.385 94.361396) + (width 0.25) + (layer "B.Cu") + (net 6) + (uuid "bc031759-9481-49cf-86b8-228f02bd227e") + ) + (segment + (start 60.915 122.715431) + (end 60.915 123.564569) + (width 0.25) + (layer "B.Cu") + (net 6) + (uuid "c3adf3d2-20c5-45f8-8bfe-e097078cee6b") + ) + (segment + (start 66.621319 136.8025) + (end 79.7175 136.8025) + (width 0.25) + (layer "B.Cu") + (net 6) + (uuid "e4df9d41-5496-4c90-bd01-e5ca04054f98") + ) + (segment + (start 60.915 123.564569) + (end 65.695 128.344569) + (width 0.25) + (layer "B.Cu") + (net 6) + (uuid "e609d6b5-2dee-4f0f-a115-8e213979029d") + ) + (segment + (start 75.18 110.44) + (end 75.18 94.2099) + (width 0.25) + (layer "F.Cu") + (net 7) + (uuid "6bc86e2c-2996-49bf-aa44-5c72550b6336") + ) + (segment + (start 74.01 82.5) + (end 74.01 93.0399) + (width 0.25) + (layer "F.Cu") + (net 7) + (uuid "957b566a-aea2-435e-b4cb-2c411feda973") + ) + (segment + (start 75.18 94.2099) + (end 78.5737 94.2099) + (width 0.25) + (layer "F.Cu") + (net 7) + (uuid "df89d961-57d2-49eb-bbca-59874808f559") + ) + (segment + (start 74.01 93.0399) + (end 75.18 94.2099) + (width 0.25) + (layer "F.Cu") + (net 7) + (uuid "f4e04e41-0b1f-4874-82b2-cb4080d896d3") + ) + (via + (at 78.5737 94.2099) + (size 0.8) + (drill 0.4) + (layers "F.Cu" "B.Cu") + (net 7) + (uuid "efd79e95-8324-4136-8fac-9615285e42c7") + ) + (segment + (start 79.085 94.1379) + (end 82.711 94.1379) + (width 0.25) + (layer "B.Cu") + (net 7) + (uuid "280f19ec-4ae6-48ec-8c75-cf612e900837") + ) + (segment + (start 83.7731 95.2) + (end 84.8 95.2) + (width 0.25) + (layer "B.Cu") + (net 7) + (uuid "39d1744e-0b1c-4b49-9a1f-df989157daa7") + ) + (segment + (start 84.8 95.2) + (end 89.88 90.12) + (width 0.25) + (layer "B.Cu") + (net 7) + (uuid "7199385e-82ba-45a4-8d99-940d43022047") + ) + (segment + (start 79.085 94.1379) + (end 79.013 94.2099) + (width 0.25) + (layer "B.Cu") + (net 7) + (uuid "71a3bca3-c4e9-4b67-9dfd-7c0b7b600969") + ) + (segment + (start 79.085 92.831) + (end 79.085 94.1379) + (width 0.25) + (layer "B.Cu") + (net 7) + (uuid "8b121a54-ab83-4a67-b050-7eb62b70d62b") + ) + (segment + (start 79.013 94.2099) + (end 78.5737 94.2099) + (width 0.25) + (layer "B.Cu") + (net 7) + (uuid "8d174f60-2811-4740-bac5-ef04d050456d") + ) + (segment + (start 82.711 94.1379) + (end 83.7731 95.2) + (width 0.25) + (layer "B.Cu") + (net 7) + (uuid "95248e96-1c28-4d02-a242-e23471082208") + ) + (segment + (start 82.26 91.39) + (end 82.26 95.2) + (width 0.25) + (layer "F.Cu") + (net 8) + (uuid "31842fad-80d1-4205-ade9-cb599793e47c") + ) + (segment + (start 84.8 90.12) + (end 83.53 90.12) + (width 0.25) + (layer "F.Cu") + (net 8) + (uuid "66071923-5a15-412d-8a71-fbc223391dfd") + ) + (segment + (start 83.53 90.12) + (end 83.53 69.8) + (width 0.25) + (layer "F.Cu") + (net 8) + (uuid "a47341c9-1190-4a53-ab9c-3cba13e5ed44") + ) + (segment + (start 82.26 95.2) + (end 82.26 105.36) + (width 0.25) + (layer "F.Cu") + (net 8) + (uuid "f6f6da33-710a-43ce-a559-5bb62d603a7a") + ) + (segment + (start 83.53 90.12) + (end 82.26 91.39) + (width 0.25) + (layer "F.Cu") + (net 8) + (uuid "ffcd4bda-db79-4da9-a8a3-635187e176a4") + ) + (segment + (start 78.0569 118.06) + (end 81.8669 114.25) + (width 0.25) + (layer "B.Cu") + (net 8) + (uuid "1560c018-4a1e-46d8-af76-960dc75055c1") + ) + (segment + (start 88.4173 113.412) + (end 88.4173 112.604) + (width 0.25) + (layer "B.Cu") + (net 8) + (uuid "42827461-628a-47fa-b08f-33f87ae0f439") + ) + (segment + (start 87.4211 111.608) + (end 84.5051 111.608) + (width 0.25) + (layer "B.Cu") + (net 8) + (uuid "5a20b21c-7f67-48bc-9682-35ad7807ea62") + ) + (segment + (start 81.8669 114.25) + (end 87.5788 114.25) + (width 0.25) + (layer "B.Cu") + (net 8) + (uuid "75a2aedf-a1f0-436d-8b60-33805d7773c0") + ) + (segment + (start 83.1799 91.7401) + (end 84.8 90.12) + (width 0.25) + (layer "B.Cu") + (net 8) + (uuid "7c315e74-68bb-47b9-b791-ef151f0a99ad") + ) + (segment + (start 88.4173 112.604) + (end 87.4211 111.608) + (width 0.25) + (layer "B.Cu") + (net 8) + (uuid "7e905f53-d12e-4c6c-a95f-df022685b381") + ) + (segment + (start 81.2331 106.387) + (end 82.26 105.36) + (width 0.25) + (layer "B.Cu") + (net 8) + (uuid "82145b9e-be81-43ed-8d4c-cd2e1ab3fd4b") + ) + (segment + (start 75.275 92.831) + (end 75.275 91.7401) + (width 0.25) + (layer "B.Cu") + (net 8) + (uuid "85374f5c-03dc-4f1c-8f58-2f107fc1a33c") + ) + (segment + (start 77.18 118.06) + (end 78.0569 118.06) + (width 0.25) + (layer "B.Cu") + (net 8) + (uuid "9d88e646-edf9-45bb-bbb5-cc7967393bf8") + ) + (segment + (start 75.275 91.7401) + (end 83.1799 91.7401) + (width 0.25) + (layer "B.Cu") + (net 8) + (uuid "d7df7ffb-ecb6-4cfa-80e1-3c7a3f2bbb6b") + ) + (segment + (start 87.5788 114.25) + (end 88.4173 113.412) + (width 0.25) + (layer "B.Cu") + (net 8) + (uuid "d7fdcb52-26a4-411b-9067-9dc16e26cf3a") + ) + (segment + (start 81.2331 108.336) + (end 81.2331 106.387) + (width 0.25) + (layer "B.Cu") + (net 8) + (uuid "e1747144-0d21-49d5-ac45-6910079b9df8") + ) + (segment + (start 84.5051 111.608) + (end 81.2331 108.336) + (width 0.25) + (layer "B.Cu") + (net 8) + (uuid "eda48c8b-865b-4453-bb6c-28f1fe4934bd") + ) + (segment + (start 55.8247 114.485) + (end 55.8247 108.935) + (width 0.25) + (layer "F.Cu") + (net 9) + (uuid "3d94bf94-28b3-4501-b4e5-bbbc21f0c949") + ) + (segment + (start 56.86 115.52) + (end 55.8247 114.485) + (width 0.25) + (layer "F.Cu") + (net 9) + (uuid "78c82b5b-d8e9-4a93-8bb4-08ddcecc90ac") + ) + (segment + (start 56.86 120.6) + (end 56.86 115.52) + (width 0.25) + (layer "F.Cu") + (net 9) + (uuid "8bc8fa6f-f48a-4d7e-b848-d901e2c7b02e") + ) + (segment + (start 55.8247 108.935) + (end 56.86 107.9) + (width 0.25) + (layer "F.Cu") + (net 9) + (uuid "8d6d4c9e-08f9-43b5-bb33-9ad274829d64") + ) + (segment + (start 61.94 115.52) + (end 61.94 120.6) + (width 0.25) + (layer "F.Cu") + (net 9) + (uuid "f8152bbb-c6e7-404e-ad64-6339be0b407c") + ) + (segment + (start 56.86 115.52) + (end 61.94 115.52) + (width 0.25) + (layer "B.Cu") + (net 9) + (uuid "09d0e9dc-d1bc-43cc-9c6c-0862846af11f") + ) + (segment + (start 61.94 107.9) + (end 56.86 107.9) + (width 0.25) + (layer "B.Cu") + (net 9) + (uuid "2f01dbc9-351e-4cd9-8350-7b66a53b3ee3") + ) + (segment + (start 67.02 124.803) + (end 66.1431 124.803) + (width 0.25) + (layer "B.Cu") + (net 9) + (uuid "82e8cd85-55c3-47ef-9c76-b8c2ac0db5ae") + ) + (segment + (start 66.1431 124.803) + (end 61.94 120.6) + (width 0.25) + (layer "B.Cu") + (net 9) + (uuid "b3f79d25-bf79-4404-b7e2-192cb54d8962") + ) + (segment + (start 67.02 125.68) + (end 67.02 124.803) + (width 0.25) + (layer "B.Cu") + (net 9) + (uuid "e49e4464-7b1a-47ea-ae3c-56146c0d6e75") + ) + (segment + (start 62.1037 143.619) + (end 63.52 145.036) + (width 0.25) + (layer "F.Cu") + (net 10) + (uuid "0ca72782-37d6-4240-902d-cbcc30ba93f5") + ) + (segment + (start 63.52 145.036) + (end 63.52 146) + (width 0.25) + (layer "F.Cu") + (net 10) + (uuid "34390c90-540c-4185-a10a-d335e2d03290") + ) + (segment + (start 56.86 128.22) + (end 62.1037 133.464) + (width 0.25) + (layer "F.Cu") + (net 10) + (uuid "525f5242-96e3-4301-92db-2e87ab6fca9a") + ) + (segment + (start 56.86 123.14) + (end 56.86 128.22) + (width 0.25) + (layer "F.Cu") + (net 10) + (uuid "602dbfaf-c2bd-4fbe-aefd-0c62402095c1") + ) + (segment + (start 62.1037 133.464) + (end 62.1037 143.619) + (width 0.25) + (layer "F.Cu") + (net 10) + (uuid "e4222a8c-64d3-40a1-bcd8-c54f2a1e1c9a") + ) + (segment + (start 68.0514 99.7983) + (end 68.0514 144.969) + (width 0.25) + (layer "F.Cu") + (net 11) + (uuid "4b384b9a-ace7-414f-85f4-36c871b82c79") + ) + (segment + (start 67.02 97.74) + (end 67.02 98.7669) + (width 0.25) + (layer "F.Cu") + (net 11) + (uuid "98edad9e-9b7d-4306-acd9-bcd21ca6ec8f") + ) + (segment + (start 68.0514 144.969) + (end 67.02 146) + (width 0.25) + (layer "F.Cu") + (net 11) + (uuid "a50917f3-82e3-4232-b42d-13ef12c3d26b") + ) + (segment + (start 67.02 98.7669) + (end 68.0514 99.7983) + (width 0.25) + (layer "F.Cu") + (net 11) + (uuid "c8e59ab2-0126-4ee4-bcb4-f9feb13b6814") + ) + (segment + (start 66.385 96.0781) + (end 66.385 92.831) + (width 0.25) + (layer "B.Cu") + (net 11) + (uuid "2c42c174-72da-4bbb-a82d-72bf4284b146") + ) + (segment + (start 67.02 96.7131) + (end 66.385 96.0781) + (width 0.25) + (layer "B.Cu") + (net 11) + (uuid "93a8ecaa-164f-41e8-9c1d-541a4b1a161d") + ) + (segment + (start 67.02 97.74) + (end 67.02 96.7131) + (width 0.25) + (layer "B.Cu") + (net 11) + (uuid "f2759f14-3b40-4461-975f-25b120ec3674") + ) + (segment + (start 63.52 135.84) + (end 63.52 129.8) + (width 0.25) + (layer "F.Cu") + (net 12) + (uuid "883338c8-980d-4e1d-9d4f-d6f471350e92") + ) + (segment + (start 61.94 128.22) + (end 61.94 123.14) + (width 0.25) + (layer "F.Cu") + (net 12) + (uuid "cd2e08c0-8a72-4ef4-b9a7-37cb0ae7dbb2") + ) + (segment + (start 63.52 129.8) + (end 61.94 128.22) + (width 0.25) + (layer "F.Cu") + (net 12) + (uuid "e731ea8a-6512-4fe7-bfe8-b56cca27c23b") + ) + (segment + (start 55.835 112.555431) + (end 55.835 115.944569) + (width 0.25) + (layer "B.Cu") + (net 13) + (uuid "019172d2-a161-4907-a88f-0d74fa4b4f33") + ) + (segment + (start 53.895431 86.555) + (end 53.295 87.155431) + (width 0.25) + (layer "B.Cu") + (net 13) + (uuid "087a7aba-b84d-4bdb-8168-0d680025f053") + ) + (segment + (start 66.145 125.441379) + (end 66.145 134.965) + (width 0.25) + (layer "B.Cu") + (net 13) + (uuid "0918751e-b6da-4ded-82ac-c0ad868eb521") + ) + (segment + (start 66.145 134.965) + (end 67.02 135.84) + (width 0.25) + (layer "B.Cu") + (net 13) + (uuid "1ab50c31-6968-45d3-88a9-16408896d91e") + ) + (segment + (start 64.48 102.82) + (end 64.48 111.38) + (width 0.25) + (layer "B.Cu") + (net 13) + (uuid "1c421ee7-16f8-4500-a340-69c5b74a1b81") + ) + (segment + (start 53.295 91.635) + (end 64.48 102.82) + (width 0.25) + (layer "B.Cu") + (net 13) + (uuid "248b90af-9dc2-4d47-a05a-fd5972a7e894") + ) + (segment + (start 64.261 86.555) + (end 53.895431 86.555) + (width 0.25) + (layer "B.Cu") + (net 13) + (uuid "30085982-784c-491b-bfe4-3f941ffef640") + ) + (segment + (start 64.48 111.38) + (end 63.905 111.955) + (width 0.25) + (layer "B.Cu") + (net 13) + (uuid "36d95308-5a98-43b6-81c7-519b826e4bea") + ) + (segment + (start 65.115 87.409) + (end 64.261 86.555) + (width 0.25) + (layer "B.Cu") + (net 13) + (uuid "56ce4b67-3f23-43fb-a2e0-0164633a3eea") + ) + (segment + (start 63.905 111.955) + (end 56.435431 111.955) + (width 0.25) + (layer "B.Cu") + (net 13) + (uuid "7ae971d2-7e24-4e76-9d52-322447ccb621") + ) + (segment + (start 56.435431 111.955) + (end 55.835 112.555431) + (width 0.25) + (layer "B.Cu") + (net 13) + (uuid "80b39636-d1f7-497b-b86d-7d7943f999c6") + ) + (segment + (start 62.328621 121.625) + (end 66.145 125.441379) + (width 0.25) + (layer "B.Cu") + (net 13) + (uuid "a8447aed-f282-439c-aeac-7b3f0f091a82") + ) + (segment + (start 53.295 87.155431) + (end 53.295 91.635) + (width 0.25) + (layer "B.Cu") + (net 13) + (uuid "b8f9283e-5dad-4ba5-a4c4-72bb75992980") + ) + (segment + (start 61.515431 121.625) + (end 62.328621 121.625) + (width 0.25) + (layer "B.Cu") + (net 13) + (uuid "c901a1bf-f34e-4e48-a771-eb1c45f5a191") + ) + (segment + (start 66.385 87.409) + (end 65.115 87.409) + (width 0.25) + (layer "B.Cu") + (net 13) + (uuid "f7a7b68b-bfd1-4698-98b7-ddfdcf5a6690") + ) + (segment + (start 55.835 115.944569) + (end 61.515431 121.625) + (width 0.25) + (layer "B.Cu") + (net 13) + (uuid "ffea876b-4655-4a02-a75c-270312f59a0c") + ) + (segment + (start 67.02 106.931) + (end 67.02 110.44) + (width 0.25) + (layer "F.Cu") + (net 14) + (uuid "2910ffe7-604c-4c0c-92f1-d80a476295d5") + ) + (segment + (start 54.32 83.13) + (end 53.69 82.5) + (width 0.25) + (layer "F.Cu") + (net 14) + (uuid "3922cd73-735e-4b43-8249-8f5016ce11a9") + ) + (segment + (start 54.32 87.58) + (end 54.32 83.13) + (width 0.25) + (layer "F.Cu") + (net 14) + (uuid "475ceb0f-2125-4176-a545-b93ccaccc8e8") + ) + (segment + (start 61.94 95.2) + (end 61.94 101.851) + (width 0.25) + (layer "F.Cu") + (net 14) + (uuid "6c0e36f5-45c4-4998-9874-6ae5edd9c3ff") + ) + (segment + (start 61.94 101.851) + (end 67.02 106.931) + (width 0.25) + (layer "F.Cu") + (net 14) + (uuid "7296ec70-977c-49dd-9deb-9bb59ba7a870") + ) + (segment + (start 58.3644 94.7814) + (end 61.4057 91.7401) + (width 0.25) + (layer "B.Cu") + (net 14) + (uuid "09c17a1b-c829-4891-af5d-6b9d4636f772") + ) + (segment + (start 68.925 91.7401) + (end 68.925 92.831) + (width 0.25) + (layer "B.Cu") + (net 14) + (uuid "0c13af30-6978-4c11-9ea3-420ba2531c89") + ) + (segment + (start 61.4057 91.7401) + (end 68.925 91.7401) + (width 0.25) + (layer "B.Cu") + (net 14) + (uuid "22f17e60-7d79-4936-b43a-ff8af616a405") + ) + (segment + (start 61.4057 91.7401) + (end 58.4801 91.7401) + (width 0.25) + (layer "B.Cu") + (net 14) + (uuid "78fed139-5eaf-49fc-9910-d10f12339d29") + ) + (segment + (start 61.94 95.2) + (end 60.9131 95.2) + (width 0.25) + (layer "B.Cu") + (net 14) + (uuid "96f7d759-9760-4750-82ea-297b16461ed8") + ) + (segment + (start 58.3644 95.7155) + (end 58.3644 94.7814) + (width 0.25) + (layer "B.Cu") + (net 14) + (uuid "a45f40d4-b978-47b7-84ce-041919e2732e") + ) + (segment + (start 60.9131 95.2) + (end 59.8674 96.2457) + (width 0.25) + (layer "B.Cu") + (net 14) + (uuid "b65b2349-5006-446b-8e4e-8ef2abbbd3d6") + ) + (segment + (start 59.8674 96.2457) + (end 58.8946 96.2457) + (width 0.25) + (layer "B.Cu") + (net 14) + (uuid "bad9567c-8494-4f2c-a2d8-616e5ae3134c") + ) + (segment + (start 58.8946 96.2457) + (end 58.3644 95.7155) + (width 0.25) + (layer "B.Cu") + (net 14) + (uuid "d0a3cc18-d901-4332-9a9f-251f38b82aa0") + ) + (segment + (start 58.4801 91.7401) + (end 54.32 87.58) + (width 0.25) + (layer "B.Cu") + (net 14) + (uuid "d74b8be1-f3d3-4ae9-9ba4-ab20e1ae50d4") + ) + (segment + (start 67.02 117.183) + (end 66.1431 116.306) + (width 0.25) + (layer "F.Cu") + (net 15) + (uuid "00cabc8d-c100-45fd-a637-c0db99669427") + ) + (segment + (start 59.4 102.82) + (end 59.4 95.2) + (width 0.25) + (layer "F.Cu") + (net 15) + (uuid "14f836c7-f4c6-48a2-a7d3-4e75e85acc7a") + ) + (segment + (start 66.1431 116.306) + (end 66.1431 109.563) + (width 0.25) + (layer "F.Cu") + (net 15) + (uuid "27a5431f-bd2c-4dba-8fce-f7761532ed6a") + ) + (segment + (start 61.94 105.36) + (end 59.4 102.82) + (width 0.25) + (layer "F.Cu") + (net 15) + (uuid "6a77169d-27c3-4a31-9c60-4d382d5f35bd") + ) + (segment + (start 66.1431 109.563) + (end 61.94 105.36) + (width 0.25) + (layer "F.Cu") + (net 15) + (uuid "73cdbe46-1aab-4b3b-a95a-46ee80046098") + ) + (segment + (start 59.4 90.12) + (end 59.4 95.2) + (width 0.25) + (layer "F.Cu") + (net 15) + (uuid "75391f0c-3271-4ec5-aaac-a2a1e343d223") + ) + (segment + (start 59.4 90.12) + (end 60.67 88.85) + (width 0.25) + (layer "F.Cu") + (net 15) + (uuid "7988efa7-b56d-4fb0-8e46-9b1fceee1924") + ) + (segment + (start 60.67 88.85) + (end 60.67 69.8) + (width 0.25) + (layer "F.Cu") + (net 15) + (uuid "b211ee2c-923e-4dc7-934f-102069ae344e") + ) + (segment + (start 67.02 118.06) + (end 67.02 117.183) + (width 0.25) + (layer "F.Cu") + (net 15) + (uuid "c7e90134-c1ca-41d2-9f2b-326e7eb00edf") + ) + (segment + (start 60.6781 93.9219) + (end 59.4 95.2) + (width 0.25) + (layer "B.Cu") + (net 15) + (uuid "5d8a60ec-b607-42fb-bd54-f442e57b58e1") + ) + (segment + (start 65.115 92.831) + (end 65.115 93.9219) + (width 0.25) + (layer "B.Cu") + (net 15) + (uuid "a66f2ae3-4e0d-4e5c-ad5d-28687e29946e") + ) + (segment + (start 65.115 93.9219) + (end 60.6781 93.9219) + (width 0.25) + (layer "B.Cu") + (net 15) + (uuid "b8a0e001-7d95-4223-b6dc-ac505a30a25f") + ) + (segment + (start 77.815 87.409) + (end 77.815 86.97) + (width 0.25) + (layer "B.Cu") + (net 16) + (uuid "6f61321f-33fd-4584-b60f-438f3e1098c6") + ) + (segment + (start 77.815 86.97) + (end 82.285 82.5) + (width 0.25) + (layer "B.Cu") + (net 16) + (uuid "70511cf2-9a14-4198-8286-1bfd3cca3757") + ) + (segment + (start 82.285 82.5) + (end 90.51 82.5) + (width 0.25) + (layer "B.Cu") + (net 16) + (uuid "757574d2-7258-41d3-9a10-fd4dcdcd72a5") + ) + (segment + (start 77.815 70.435) + (end 77.815 87.409) + (width 0.25) + (layer "B.Cu") + (net 16) + (uuid "d51f52a7-f6ce-4e19-b25d-b0c4edc60f48") + ) + (segment + (start 77.18 69.8) + (end 77.815 70.435) + (width 0.25) + (layer "B.Cu") + (net 16) + (uuid "ed9faa35-0ae0-4d09-bc17-fabe2fb2f974") + ) + (segment + (start 77.815 96.712) + (end 80.1524 96.712) + (width 0.25) + (layer "B.Cu") + (net 17) + (uuid "3e5c4264-ebe0-4943-a1e2-ed5cdc893266") + ) + (segment + (start 80.7799 97.3395) + (end 80.7799 100.733) + (width 0.25) + (layer "B.Cu") + (net 17) + (uuid "648291b4-1793-4d0d-8844-5b3e4252de96") + ) + (segment + (start 80.1524 96.712) + (end 80.7799 97.3395) + (width 0.25) + (layer "B.Cu") + (net 17) + (uuid "7b38de57-0ae7-481e-9235-37862d438bee") + ) + (segment + (start 77.815 97.105) + (end 77.18 97.74) + (width 0.25) + (layer "B.Cu") + (net 17) + (uuid "87ca52d1-e702-47fc-bf24-185407e7a018") + ) + (segment + (start 77.815 92.831) + (end 77.815 96.712) + (width 0.25) + (layer "B.Cu") + (net 17) + (uuid "bf93c692-d5e7-42ec-bb4e-a4c87b3c3782") + ) + (segment + (start 77.815 96.712) + (end 77.815 97.105) + (width 0.25) + (layer "B.Cu") + (net 17) + (uuid "c2a0763b-38c3-4b07-9c87-46a3bd0f3d36") + ) + (segment + (start 79.72 101.793) + (end 79.72 102.82) + (width 0.25) + (layer "B.Cu") + (net 17) + (uuid "d7783c50-c985-44d8-b643-48f90045348d") + ) + (segment + (start 80.7799 100.733) + (end 79.72 101.793) + (width 0.25) + (layer "B.Cu") + (net 17) + (uuid "ede63222-c37a-4bfc-8ce8-f8abc11abb36") + ) + (segment + (start 67.02 79.33) + (end 70.19 82.5) + (width 0.25) + (layer "F.Cu") + (net 18) + (uuid "0ef7f7a5-981b-400b-9462-b6f0b63e63e3") + ) + (segment + (start 67.02 69.8) + (end 67.02 79.33) + (width 0.25) + (layer "F.Cu") + (net 18) + (uuid "3a499630-8919-4b2d-bd64-864f3ce3f1ff") + ) + (segment + (start 67.655 85.035) + (end 70.19 82.5) + (width 0.25) + (layer "B.Cu") + (net 18) + (uuid "37146674-8903-4936-a7cf-cbe3a5c8e2b9") + ) + (segment + (start 67.655 87.409) + (end 67.655 85.035) + (width 0.25) + (layer "B.Cu") + (net 18) + (uuid "df5fdc89-21bf-4c12-a936-b5b39fccf22c") + ) + (segment + (start 64.48 99.2531) + (end 64.48 97.74) + (width 0.25) + (layer "F.Cu") + (net 19) + (uuid "05a512b3-b2a0-4588-aa5f-f0e916ade693") + ) + (segment + (start 67.02 101.793) + (end 64.48 99.2531) + (width 0.25) + (layer "F.Cu") + (net 19) + (uuid "59162bae-baf1-41e6-876f-3c170a31c870") + ) + (segment + (start 67.02 102.82) + (end 67.02 101.793) + (width 0.25) + (layer "F.Cu") + (net 19) + (uuid "8ccc9c35-dea0-4b35-a02f-925a9b479e49") + ) + (segment + (start 68.0616 98.1759) + (end 67.4514 98.7861) + (width 0.25) + (layer "B.Cu") + (net 19) + (uuid "39fe054d-90d4-4a40-b218-56599c5f40db") + ) + (segment + (start 67.655 92.831) + (end 67.655 93.9219) + (width 0.25) + (layer "B.Cu") + (net 19) + (uuid "4d85a315-8755-4acd-a8a5-e11dc98c56a8") + ) + (segment + (start 67.655 93.9219) + (end 68.0616 94.3285) + (width 0.25) + (layer "B.Cu") + (net 19) + (uuid "b4e069a2-72f4-4b60-8e22-754acc96e87a") + ) + (segment + (start 68.0616 94.3285) + (end 68.0616 98.1759) + (width 0.25) + (layer "B.Cu") + (net 19) + (uuid "cf2347a4-b616-42dd-82c4-3e8831a95ae1") + ) + (segment + (start 65.5261 98.7861) + (end 64.48 97.74) + (width 0.25) + (layer "B.Cu") + (net 19) + (uuid "dc55bf62-9fd2-4d96-b49a-5377c281e192") + ) + (segment + (start 67.4514 98.7861) + (end 65.5261 98.7861) + (width 0.25) + (layer "B.Cu") + (net 19) + (uuid "e018ca69-42c2-4dd7-a638-951a090e6e08") + ) + (segment + (start 87.34 130.76) + (end 87.34 151.08) + (width 0.25) + (layer "F.Cu") + (net 20) + (uuid "5af7fdc9-f6dc-4736-bf14-91c7c0b2619b") + ) + (segment + (start 87.34 151.08) + (end 82.26 156.16) + (width 0.25) + (layer "F.Cu") + (net 20) + (uuid "9cc93276-0e29-4094-8a03-345dfcbd198f") + ) + (segment + (start 82.26 130.76) + (end 82.26 151.08) + (width 0.25) + (layer "F.Cu") + (net 21) + (uuid "20cef1fc-af0f-4b59-9d11-c24cc50e6dc2") + ) + (segment + (start 82.26 151.08) + (end 77.18 156.16) + (width 0.25) + (layer "F.Cu") + (net 21) + (uuid "df803807-b0c8-4f87-8ba8-e20a8f26b6ef") + ) + (segment + (start 56.86 151.08) + (end 61.94 156.16) + (width 0.25) + (layer "F.Cu") + (net 22) + (uuid "38341714-caa4-4f5a-8229-91df7acc3f58") + ) + (segment + (start 56.86 130.76) + (end 56.86 151.08) + (width 0.25) + (layer "F.Cu") + (net 22) + (uuid "8beb86d4-1bbc-429a-ac58-7a070fe8ff8b") + ) + (segment + (start 64.4844 153.624) + (end 67.02 156.16) + (width 0.25) + (layer "F.Cu") + (net 23) + (uuid "18ef5a20-c8d3-4071-be43-07b7a6fb1c73") + ) + (segment + (start 64.4844 138.542) + (end 64.4844 153.624) + (width 0.25) + (layer "F.Cu") + (net 23) + (uuid "47ef807b-b281-4de9-8565-96981b28e991") + ) + (segment + (start 62.5556 136.613) + (end 64.4844 138.542) + (width 0.25) + (layer "F.Cu") + (net 23) + (uuid "5f13957e-bdbf-4b30-91de-426889aa6dcc") + ) + (segment + (start 61.94 131.787) + (end 62.5556 132.402) + (width 0.25) + (layer "F.Cu") + (net 23) + (uuid "b252279e-62aa-430e-9c8d-2aa3674c6203") + ) + (segment + (start 62.5556 132.402) + (end 62.5556 136.613) + (width 0.25) + (layer "F.Cu") + (net 23) + (uuid "dbe52a5c-087a-4eb5-9e2f-d99eaff09807") + ) + (segment + (start 61.94 130.76) + (end 61.94 131.787) + (width 0.25) + (layer "F.Cu") + (net 23) + (uuid "e9b6b720-aef4-4a33-b698-8530db7a71d0") + ) + (embedded_fonts no) +) diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/mic_preamp_pcb_prototype_p2.kicad_pcb.before-sync-2026-04-20 b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/mic_preamp_pcb_prototype_p2.kicad_pcb.before-sync-2026-04-20 new file mode 100644 index 0000000..373e3e8 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/mic_preamp_pcb_prototype_p2.kicad_pcb.before-sync-2026-04-20 @@ -0,0 +1,2586 @@ +(kicad_pcb (version 20221018) (generator pcbnew) + + (general + (thickness 1.6) + ) + + (paper "A4") + (layers + (0 "F.Cu" signal) + (31 "B.Cu" signal) + (32 "B.Adhes" user "B.Adhesive") + (33 "F.Adhes" user "F.Adhesive") + (34 "B.Paste" user) + (35 "F.Paste" user) + (36 "B.SilkS" user "B.Silkscreen") + (37 "F.SilkS" user "F.Silkscreen") + (38 "B.Mask" user) + (39 "F.Mask" user) + (40 "Dwgs.User" user "User.Drawings") + (41 "Cmts.User" user "User.Comments") + (42 "Eco1.User" user "User.Eco1") + (43 "Eco2.User" user "User.Eco2") + (44 "Edge.Cuts" user) + (45 "Margin" user) + (46 "B.CrtYd" user "B.Courtyard") + (47 "F.CrtYd" user "F.Courtyard") + (48 "B.Fab" user) + (49 "F.Fab" user) + (50 "User.1" user) + (51 "User.2" user) + (52 "User.3" user) + (53 "User.4" user) + (54 "User.5" user) + (55 "User.6" user) + (56 "User.7" user) + (57 "User.8" user) + (58 "User.9" user) + ) + + (setup + (stackup + (layer "F.SilkS" (type "Top Silk Screen")) + (layer "F.Paste" (type "Top Solder Paste")) + (layer "F.Mask" (type "Top Solder Mask") (thickness 0.01)) + (layer "F.Cu" (type "copper") (thickness 0.035)) + (layer "dielectric 1" (type "core") (thickness 1.51) (material "FR4") (epsilon_r 4.5) (loss_tangent 0.02)) + (layer "B.Cu" (type "copper") (thickness 0.035)) + (layer "B.Mask" (type "Bottom Solder Mask") (thickness 0.01)) + (layer "B.Paste" (type "Bottom Solder Paste")) + (layer "B.SilkS" (type "Bottom Silk Screen")) + (copper_finish "None") + (dielectric_constraints no) + ) + (pad_to_mask_clearance 0) + (grid_origin 219.42 67.26) + (pcbplotparams + (layerselection 0x00010fc_ffffffff) + (plot_on_all_layers_selection 0x0000000_00000000) + (disableapertmacros false) + (usegerberextensions false) + (usegerberattributes true) + (usegerberadvancedattributes true) + (creategerberjobfile true) + (dashed_line_dash_ratio 12.000000) + (dashed_line_gap_ratio 3.000000) + (svgprecision 4) + (plotframeref false) + (viasonmask false) + (mode 1) + (useauxorigin false) + (hpglpennumber 1) + (hpglpenspeed 20) + (hpglpendiameter 15.000000) + (dxfpolygonmode true) + (dxfimperialunits true) + (dxfusepcbnewfont true) + (psnegative false) + (psa4output false) + (plotreference true) + (plotvalue true) + (plotinvisibletext false) + (sketchpadsonfab false) + (subtractmaskfromsilk false) + (outputformat 1) + (mirror false) + (drillshape 0) + (scaleselection 1) + (outputdirectory "Gerbers") + ) + ) + + (net 0 "") + (net 1 "Net-(D1-K)") + (net 2 "Earth") + (net 3 "Net-(C3-Pad1)") + (net 4 "GND") + (net 5 "Net-(C3-Pad2)") + (net 6 "Net-(C4-Pad1)") + (net 7 "Net-(C4-Pad2)") + (net 8 "Net-(C5-Pad1)") + (net 9 "Net-(VCC_A2-Pin_1)") + (net 10 "Net-(D2-K)") + (net 11 "Net-(C10-Pad1)") + (net 12 "Net-(C10-Pad2)") + (net 13 "Net-(C11-Pad1)") + (net 14 "Net-(C11-Pad2)") + (net 15 "Net-(C12-Pad1)") + (net 16 "Net-(VCC_B2-Pin_1)") + (net 17 "Net-(SGNL_A1-Pin_1)") + (net 18 "Net-(IC1-Pad3)") + (net 19 "Net-(IC1-Pad6)") + (net 20 "Net-(SGNL_B1-Pin_1)") + (net 21 "Net-(IC2-Pad3)") + (net 22 "Net-(IC2-Pad6)") + (net 23 "Net-(X3A1-Pin_1)") + (net 24 "Net-(X2A1-Pin_1)") + (net 25 "Net-(X3B1-Pin_1)") + (net 26 "Net-(X2B1-Pin_1)") + + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") + (tstamp 04cdfa84-93d5-4ee1-9040-d0312d749bd6) + (at 59.4 90.12 90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Unpolarized capacitor") + (property "ki_keywords" "cap capacitor") + (path "/b34f1ed3-ca84-4b39-accd-7cbb7c08ede6") + (attr through_hole) + (fp_text reference "C13" (at -0.553201 2.439254) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp e7e3fa75-c2fc-46bd-b988-524e73c7524b) + ) + (fp_text value "0.1uF" (at 1.27 1.92 90) (layer "F.Fab") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp ce2f5b5c-0c53-4205-ac98-785d789f2ec6) + ) + (fp_line (start 0.92 0) (end 1.54 0) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 745c8e4d-5da7-4f44-a20b-25864bf10001)) + (fp_circle (center 0 0) (end 0.92 0) + (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp c0f7a03c-0ad2-4804-b3e1-d1ac01f576fd)) + (fp_line (start -1.05 -1.05) (end -1.05 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp e863d924-af2c-44ae-b0a1-73e980de9875)) + (fp_line (start -1.05 1.05) (end 3.49 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 1eae90c6-3259-484a-a33a-023af40e32a2)) + (fp_line (start 3.49 -1.05) (end -1.05 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp a9b74ddf-5cee-4a52-a165-56c2b02c46ad)) + (fp_line (start 3.49 1.05) (end 3.49 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp eba0052a-3f0c-4850-9d3c-a37d54f8bac2)) + (fp_line (start 0 0) (end 2.54 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 22681448-812a-4abe-abcf-60313ea09da1)) + (fp_circle (center 0 0) (end 0.8 0) + (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 2e2a2d8e-b46f-4391-8379-816526a0f339)) + (pad "1" thru_hole circle (at 0 0 90) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 16 "Net-(VCC_B2-Pin_1)") (pintype "passive") (tstamp b5037d99-8272-4e16-b39b-a2a20234e7f1)) + (pad "2" thru_hole oval (at 2.54 0 90) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 2 "Earth") (pintype "passive") (tstamp 8d847d48-72e1-4c36-9931-8cfb4dfd1ac0)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") + (tstamp 06a23103-0375-47b9-9d2d-e1886a061500) + (at 64.48 97.74) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Resistor") + (property "ki_keywords" "R res resistor") + (path "/4dfa4bfd-4e46-43b4-9020-c77e950185e1") + (attr through_hole) + (fp_text reference "R16" (at 0.213146 1.746691) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 1b011455-2b58-4f34-b9d0-ea77e5f68ec2) + ) + (fp_text value "2.2K" (at 1.27 1.92) (layer "F.Fab") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp ef3764f3-5e9f-4c05-88e7-b69168ea8607) + ) + (fp_line (start 0.92 0) (end 1.54 0) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 47428e46-80cf-4a9f-80bc-774e2dd5d84d)) + (fp_circle (center 0 0) (end 0.92 0) + (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp f7bbf5bd-0860-4583-9c9e-02e22a08a8ca)) + (fp_line (start -1.05 -1.05) (end -1.05 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp d1435468-f3f3-4c95-9254-edc5fe1e7538)) + (fp_line (start -1.05 1.05) (end 3.49 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 9a547cd5-433e-453c-8217-3d6746024354)) + (fp_line (start 3.49 -1.05) (end -1.05 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 2d3b1bb4-93db-4bf5-ab00-d504ab21e1e5)) + (fp_line (start 3.49 1.05) (end 3.49 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 14f2f782-d3d5-457e-9b44-ac104f15b4ed)) + (fp_line (start 0 0) (end 2.54 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp e0df1665-27fd-449f-aca0-82f2114c64b9)) + (fp_circle (center 0 0) (end 0.8 0) + (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 1ae364a0-6e8b-4707-be25-86ad093f8d15)) + (pad "1" thru_hole circle (at 0 0) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 22 "Net-(IC2-Pad6)") (pintype "passive") (tstamp c51b7066-bde8-48bc-b0e5-883836bab8a4)) + (pad "2" thru_hole oval (at 2.54 0) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 12 "Net-(C10-Pad2)") (pintype "passive") (tstamp d1473500-173c-4d85-985c-932b6bfdb702)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "MountingHole:MountingHole_2.7mm_M2.5_ISO14580" (layer "F.Cu") + (tstamp 06a73276-4738-419b-bc90-44210544e3fe) + (at 57.495 77.591) + (descr "Mounting Hole 2.7mm, no annular, M2.5, ISO14580") + (tags "mounting hole 2.7mm no annular m2.5 iso14580") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Mounting Hole without connection") + (property "ki_keywords" "mounting hole") + (attr exclude_from_pos_files) + (fp_text reference "H1" (at 0 -3.25) (layer "F.SilkS") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp db699c64-ba8b-4e68-8122-4b315359b5f2) + ) + (fp_text value "M2.5" (at 0 3.25) (layer "F.Fab") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp cfbd51a1-0b26-4952-a8eb-b6f8c7a75f1f) + ) + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp f0bc4919-5f99-45ba-a4ae-986c8f04c10a) + ) + (fp_circle (center 0 0) (end 2.25 0) + (stroke (width 0.15) (type solid)) (fill none) (layer "Cmts.User") (tstamp 86a7048d-682a-4ad8-af23-3a4be441d615)) + (fp_circle (center 0 0) (end 2.5 0) + (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd") (tstamp e1b489b6-5af7-44d0-b23a-7914f8af8879)) + (pad "" np_thru_hole oval (at 0 0) (size 3.5 2.7) (drill oval 3.5 2.7) (layers "F&B.Cu" "*.Mask") + (thermal_bridge_angle 45) (tstamp 3cc6757b-2ef4-4f86-953d-f8e25ecdb6dc)) + ) + + (footprint "Library:conn_holepad" (layer "F.Cu") + (tstamp 0d7d7047-21e2-4464-b6ae-828a43548935) + (at 72.1 156.16) + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Generic connector, single row, 01x01, script generated") + (property "ki_keywords" "connector") + (path "/cf4c5d8d-0c85-43b3-b2ab-eff2610198e1") + (attr through_hole) + (fp_text reference "X1" (at 0 -0.5 unlocked) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.1))) + (tstamp 7f7ff3c7-87d0-4667-be20-a77440a2a01c) + ) + (fp_text value "Conn_01x01_Pin" (at 0 1 unlocked) (layer "F.Fab") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp c5175324-d7b3-48f1-adc1-e4e54a5cd289) + ) + (fp_text user "${REFERENCE}" (at 0 2.5 unlocked) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 7ed70e4d-fab4-4234-92b1-1e035f55ae07) + ) + (pad "1" thru_hole circle (at 0 0) (size 3 3) (drill 1.5) (layers "*.Cu" "*.Mask") + (net 4 "GND") (pinfunction "Pin_1") (pintype "passive") (tstamp ad89e844-d3c4-47e7-9865-ad19d0aeab33)) + ) + + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") + (tstamp 164b3322-14a0-4ba8-9213-866bdfffe114) + (at 87.34 128.22 -90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Resistor") + (property "ki_keywords" "R res resistor") + (path "/465be87b-5590-4da0-9122-4e5009c124ff") + (attr through_hole) + (fp_text reference "R1" (at 2.891733 -1.937033 -180) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 7016fc18-6df7-4cf0-8145-a161da92d943) + ) + (fp_text value "47" (at 1.27 1.92 -90) (layer "F.Fab") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp e31afb44-10ca-4053-8616-df692abfbf50) + ) + (fp_line (start 0.92 0) (end 1.54 0) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp e7e0f93e-e037-4307-af8c-630d93f2aa8a)) + (fp_circle (center 0 0) (end 0.92 0) + (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp 8fd70b97-3f7d-4c7e-abe2-00c7ca6df05b)) + (fp_line (start -1.05 -1.05) (end -1.05 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp af0a02c1-a929-4b4e-b125-5da65e8f33ed)) + (fp_line (start -1.05 1.05) (end 3.49 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 1a97f59e-5a9d-4fd5-9bf9-a9d39bedf1cb)) + (fp_line (start 3.49 -1.05) (end -1.05 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp f43bdfe6-564a-4250-8e73-3c83a173bd64)) + (fp_line (start 3.49 1.05) (end 3.49 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 39517e59-18cd-48a5-bcb7-8bf4d2de6838)) + (fp_line (start 0 0) (end 2.54 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp bfdb51a1-8150-408a-bb28-4b074f64ebd1)) + (fp_circle (center 0 0) (end 0.8 0) + (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 3a6c1c4a-911d-40ad-8a7f-6d0b0329704d)) + (pad "1" thru_hole circle (at 0 0 270) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 3 "Net-(C3-Pad1)") (pintype "passive") (tstamp f0f0b9e2-bd1e-4cc8-85f4-83d16144d318)) + (pad "2" thru_hole oval (at 2.54 0 270) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 23 "Net-(X3A1-Pin_1)") (pintype "passive") (tstamp cc2e40ce-5b5d-47d5-9c39-cebc9b9d3fd4)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") + (tstamp 208db086-01b9-4ed9-8543-986ef572fe92) + (at 77.18 97.74) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Resistor") + (property "ki_keywords" "R res resistor") + (path "/a10f13f8-a81d-4f2b-b313-a7028981413d") + (attr through_hole) + (fp_text reference "R6" (at -0.259885 1.754152) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 0aca9955-60e9-44e0-9b6c-0673e92a1bcc) + ) + (fp_text value "2.2K" (at 1.27 1.92) (layer "F.Fab") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 9f35ce26-b6ae-4de0-bbf1-13f812364108) + ) + (fp_line (start 0.92 0) (end 1.54 0) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 2fe2d874-de20-4f50-aafe-96a141e37236)) + (fp_circle (center 0 0) (end 0.92 0) + (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp 873de376-52d5-43c4-a3cf-fa43f1d91a6f)) + (fp_line (start -1.05 -1.05) (end -1.05 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 7da9831c-3ac5-441e-9859-47efbb9b4b85)) + (fp_line (start -1.05 1.05) (end 3.49 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 90c21000-2a25-4b9e-8305-003112da7640)) + (fp_line (start 3.49 -1.05) (end -1.05 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 3828b049-eab0-4a39-add4-64ff0e3d2fc6)) + (fp_line (start 3.49 1.05) (end 3.49 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp c790dc29-510a-44c4-9754-0b53eb2d62ee)) + (fp_line (start 0 0) (end 2.54 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp f4469cae-83d4-4671-b3dc-cb8150bebbad)) + (fp_circle (center 0 0) (end 0.8 0) + (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp b74a22cd-66c2-4c85-880a-37aa0029f00d)) + (pad "1" thru_hole circle (at 0 0) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 19 "Net-(IC1-Pad6)") (pintype "passive") (tstamp da6cefdd-c164-40fc-a51f-ab348ab92b0d)) + (pad "2" thru_hole oval (at 2.54 0) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 5 "Net-(C3-Pad2)") (pintype "passive") (tstamp ebbe8870-7fc2-4ceb-a65c-5a2171f4d779)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") + (tstamp 215dd88a-87ca-494a-a87e-9f2137eb8bcb) + (at 64.48 102.82) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Resistor") + (property "ki_keywords" "R res resistor") + (path "/6a141024-0740-4682-ac78-fa29ac380bd3") + (attr through_hole) + (fp_text reference "R19" (at 0.233664 1.740277) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp ddc6f61c-6d94-4c10-842f-360fa502ecc1) + ) + (fp_text value "2.2K" (at 1.27 1.92) (layer "F.Fab") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 1a7f7eb1-dc25-43f1-83ad-59d882f47eae) + ) + (fp_line (start 0.92 0) (end 1.54 0) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp badeb390-6d53-466d-aff9-81bbf6da38ad)) + (fp_circle (center 0 0) (end 0.92 0) + (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp 029a0e5e-e7ae-492b-9ff2-574de22461f3)) + (fp_line (start -1.05 -1.05) (end -1.05 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp ec7c247d-f86f-4a08-91b3-cfc88f4bd7e4)) + (fp_line (start -1.05 1.05) (end 3.49 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 2e918e54-78e1-4f97-b913-94819b0bc914)) + (fp_line (start 3.49 -1.05) (end -1.05 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 88b9d459-fa74-4bd5-bc3f-c86be236b777)) + (fp_line (start 3.49 1.05) (end 3.49 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 90b908c0-79fd-40ee-a14a-8228f512fcbb)) + (fp_line (start 0 0) (end 2.54 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp a8c0ac93-33c2-4363-b797-c90d50793cf1)) + (fp_circle (center 0 0) (end 0.8 0) + (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp d58f5538-ec1a-44e2-8b3e-c6c7cd130711)) + (pad "1" thru_hole circle (at 0 0) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 21 "Net-(IC2-Pad3)") (pintype "passive") (tstamp 172ce72e-ccd7-4e6f-bf49-9c982af2f8a7)) + (pad "2" thru_hole oval (at 2.54 0) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 22 "Net-(IC2-Pad6)") (pintype "passive") (tstamp 67d6f75c-3cb3-40df-9475-99436f887263)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "C47u35v:CAPPRD200W50D525H1250" (layer "F.Cu") + (tstamp 32127b65-24cd-4624-9ae5-38653049c6fb) + (at 67.02 110.44) + (descr "5*11") + (tags "Capacitor Polarised") + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Polarized capacitor") + (property "ki_keywords" "cap capacitor") + (path "/26f9efc1-f18f-46a4-a4e0-fd7b825b179e") + (attr through_hole) + (fp_text reference "C12" (at 0.961795 3.86902) (layer "F.SilkS") + (effects (font (size 1.27 1.27) (thickness 0.254))) + (tstamp a9957f41-43ff-475f-89a8-e195d0a1f43f) + ) + (fp_text value "47uF 35v" (at 0 0) (layer "F.SilkS") hide + (effects (font (size 1.27 1.27) (thickness 0.254))) + (tstamp e51d3d8e-d78e-45d0-85c2-d3ba4279a56f) + ) + (fp_circle (center 1 0) (end 1 2.625) + (stroke (width 0.2) (type solid)) (fill none) (layer "F.SilkS") (tstamp 2bb7e679-2791-4f57-9c61-cfc474e0e80f)) + (fp_circle (center 1 0) (end 1 2.625) + (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 19d2fcb9-ae5f-425b-bc59-e96493cb05dd)) + (pad "1" thru_hole rect (at 0 0) (size 1.1 1.1) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 15 "Net-(C12-Pad1)") (pintype "passive") (tstamp c725d7fb-d2d8-4859-8e5e-0d3cd4be4321)) + (pad "2" thru_hole circle (at 2 0) (size 1.1 1.1) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 4 "GND") (pintype "passive") (tstamp 310bfc25-4982-4fe7-aa75-f08bb0a76949)) + (model "UVZ1V470MDD1TA.stp" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "C47u63v:CAPPRD350W65D800H1250" (layer "F.Cu") + (tstamp 37069337-d408-4d28-ac1d-b25de44e20ba) + (at 63.52 135.84) + (descr "EEU-EB1J470SJ-1") + (tags "Capacitor Polarised") + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Polarized capacitor") + (property "ki_keywords" "cap capacitor") + (path "/388d7ed8-52d9-442b-b762-60006c60c529") + (attr through_hole) + (fp_text reference "C11" (at 1.709261 2.164442) (layer "F.SilkS") + (effects (font (size 1.27 1.27) (thickness 0.254))) + (tstamp efeb1898-966a-4c7b-ac2d-f79e09f509ca) + ) + (fp_text value "47uF 63v" (at 0 0) (layer "F.SilkS") hide + (effects (font (size 1.27 1.27) (thickness 0.254))) + (tstamp c4b08a4f-d1f7-4276-99d8-74f1dea09338) + ) + (fp_circle (center 1.75 0) (end 1.75 4) + (stroke (width 0.2) (type solid)) (fill none) (layer "F.SilkS") (tstamp bd041b97-4b7b-4601-a3e6-92cb52905170)) + (fp_circle (center 1.75 0) (end 1.75 4) + (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 2a90a626-31fc-44ea-973c-68f14242f186)) + (pad "1" thru_hole rect (at 0 0) (size 1.275 1.275) (drill 0.85) (layers "*.Cu" "*.Mask") + (net 13 "Net-(C11-Pad1)") (pintype "passive") (tstamp a87da594-d52e-48a4-9306-98eccacfff4f)) + (pad "2" thru_hole circle (at 3.5 0) (size 1.275 1.275) (drill 0.85) (layers "*.Cu" "*.Mask") + (net 14 "Net-(C11-Pad2)") (pintype "passive") (tstamp e2005726-d1f9-4de6-a5ac-fea150879263)) + (model "EEU-EB1J470SJ.stp" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") + (tstamp 3edb5673-b873-4087-ac88-b8b0ecba1c97) + (at 61.94 120.6 -90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Resistor") + (property "ki_keywords" "R res resistor") + (path "/22c624a2-9c69-4937-8b4e-0e03aaaaa038") + (attr through_hole) + (fp_text reference "R14" (at 2.965707 -2.432316) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 2bbcab44-528c-4516-b9a6-48c027d9a8ec) + ) + (fp_text value "2.2K" (at 1.27 1.92 90) (layer "F.Fab") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 8d796ea7-ed94-4592-8a98-dd6460c51c59) + ) + (fp_line (start 0.92 0) (end 1.54 0) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 3b102618-2d75-4f74-b80d-3a5c015423b2)) + (fp_circle (center 0 0) (end 0.92 0) + (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp 079cee2c-a811-4792-b517-17f45a894a3d)) + (fp_line (start -1.05 -1.05) (end -1.05 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 491cdf89-6ee8-42c3-8c68-9bc522986db6)) + (fp_line (start -1.05 1.05) (end 3.49 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp d27eae09-ea9e-442f-8117-e72b36a13ed9)) + (fp_line (start 3.49 -1.05) (end -1.05 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 65a2bd31-6e08-4daf-b2a8-926623b9f20f)) + (fp_line (start 3.49 1.05) (end 3.49 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 5e4844c5-86c5-438f-8c69-462750e00b78)) + (fp_line (start 0 0) (end 2.54 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 264d4c99-5502-4860-8c6b-357e5045764d)) + (fp_circle (center 0 0) (end 0.8 0) + (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp a0cbd4b8-6f2f-497a-89c6-30f41cc9e073)) + (pad "1" thru_hole circle (at 0 0 270) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 10 "Net-(D2-K)") (pintype "passive") (tstamp 1c7dc787-e6e2-4ec7-aef7-b2c6000765ae)) + (pad "2" thru_hole oval (at 2.54 0 270) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 13 "Net-(C11-Pad1)") (pintype "passive") (tstamp 4a9a71a1-6087-485e-9dc3-e78a801a3398)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "C47u35v:CAPPRD200W50D525H1250" (layer "F.Cu") + (tstamp 50645cf4-8007-4d77-8b63-fabebd482d62) + (at 67.02 125.68 -90) + (descr "5*11") + (tags "Capacitor Polarised") + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Polarized capacitor") + (property "ki_keywords" "cap capacitor") + (path "/d1189f40-af74-4922-94ba-fe238cf5f19c") + (attr through_hole) + (fp_text reference "C9" (at 4.880074 -0.70564) (layer "F.SilkS") + (effects (font (size 1.27 1.27) (thickness 0.254))) + (tstamp 2f9ed1ec-bcd5-45c0-bc46-ad72b6dad5fd) + ) + (fp_text value "47uF 35v" (at 0 0 90) (layer "F.SilkS") hide + (effects (font (size 1.27 1.27) (thickness 0.254))) + (tstamp b9bbc8b6-bb07-4c49-bb9e-eab0a2a1f3d2) + ) + (fp_circle (center 1 0) (end 1 2.625) + (stroke (width 0.2) (type solid)) (fill none) (layer "F.SilkS") (tstamp 6d3a5cb2-9489-47a6-ab4b-8dc365dfe226)) + (fp_circle (center 1 0) (end 1 2.625) + (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 60b9f829-6311-43f3-8287-1f07964f8e58)) + (pad "1" thru_hole rect (at 0 0 270) (size 1.1 1.1) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 10 "Net-(D2-K)") (pintype "passive") (tstamp 7814e902-3d2d-49e5-b4f5-82be6ebcebcf)) + (pad "2" thru_hole circle (at 2 0 270) (size 1.1 1.1) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 4 "GND") (pintype "passive") (tstamp 890ff405-654c-4d9f-93c2-0580d00c0ea5)) + (model "UVZ1V470MDD1TA.stp" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "R1Go:RESAD1650W70L650D250" (layer "F.Cu") + (tstamp 5104b3e0-c4fe-42eb-b101-ccee056fc4c4) + (at 53.69 82.5) + (descr "RGP0207CHK1G0") + (tags "Resistor") + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Resistor") + (property "ki_keywords" "R res resistor") + (path "/621df7af-eee1-4ba7-b334-c8f75f6a97e7") + (attr through_hole) + (fp_text reference "R20" (at 0.63 2.54) (layer "F.SilkS") + (effects (font (size 1.27 1.27) (thickness 0.254))) + (tstamp 8746d88e-59dc-4699-a145-8bad2f20e0fa) + ) + (fp_text value "1G" (at 0 0) (layer "F.SilkS") hide + (effects (font (size 1.27 1.27) (thickness 0.254))) + (tstamp a6e656f8-7716-4972-9d0a-6918430baeba) + ) + (fp_text user "${REFERENCE}" (at 0.63 2.54) (layer "F.Fab") + (effects (font (size 1.27 1.27) (thickness 0.254))) + (tstamp 74ea7ca2-74ae-44c5-9190-0627748c8b38) + ) + (fp_line (start 1.025 0) (end 5 0) + (stroke (width 0.2) (type solid)) (layer "F.SilkS") (tstamp 378094dc-27db-4b38-a5ba-28d82dfc0369)) + (fp_line (start 5 -1.25) (end 11.5 -1.25) + (stroke (width 0.2) (type solid)) (layer "F.SilkS") (tstamp a7748322-8c5f-46cf-bd37-2fb01db21bc6)) + (fp_line (start 5 1.25) (end 5 -1.25) + (stroke (width 0.2) (type solid)) (layer "F.SilkS") (tstamp e286f56c-b764-4fd8-947f-4c9064d1f136)) + (fp_line (start 11.5 -1.25) (end 11.5 1.25) + (stroke (width 0.2) (type solid)) (layer "F.SilkS") (tstamp 203edae9-b058-41e0-b169-692f5c9b4aca)) + (fp_line (start 11.5 0) (end 15.475 0) + (stroke (width 0.2) (type solid)) (layer "F.SilkS") (tstamp 1e7d0371-3bb0-4b3c-a1e8-f3f81afd40de)) + (fp_line (start 11.5 1.25) (end 5 1.25) + (stroke (width 0.2) (type solid)) (layer "F.SilkS") (tstamp 30941456-c4ee-4b5e-b2a0-dba0876787fb)) + (fp_line (start -0.925 -1.6) (end 17.425 -1.6) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 19e24384-4dc9-40f5-8b69-52afb8de8277)) + (fp_line (start -0.925 1.6) (end -0.925 -1.6) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 7921c54e-03fb-4873-a717-2904fdbc97cb)) + (fp_line (start 17.425 -1.6) (end 17.425 1.6) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp ff470143-b351-4dfe-866b-679817ca38bf)) + (fp_line (start 17.425 1.6) (end -0.925 1.6) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 9e8c624d-a666-4c46-aa6e-6d4117680901)) + (fp_line (start 0 0) (end 5 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp c9f22a6b-a010-4287-b248-6f1073552a37)) + (fp_line (start 5 -1.25) (end 11.5 -1.25) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp da0902d6-d4e7-4c5d-bd67-265ab1567f54)) + (fp_line (start 5 1.25) (end 5 -1.25) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 1eeb6b7e-98df-4357-86ac-9b6e40ecf6b6)) + (fp_line (start 11.5 -1.25) (end 11.5 1.25) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 884f6c53-b78a-49f4-82af-2883729a7adc)) + (fp_line (start 11.5 0) (end 16.5 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 7ddb31ac-1194-4c0c-90da-e6b149bfa01c)) + (fp_line (start 11.5 1.25) (end 5 1.25) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp e241adbb-49a6-4f7e-8e6b-fa858c0f5cff)) + (pad "1" thru_hole circle (at 0 0) (size 1.35 1.35) (drill 0.9) (layers "*.Cu" "*.Mask") + (net 15 "Net-(C12-Pad1)") (pintype "passive") (tstamp 9158f69c-9a15-4931-8b93-4d1366aea86c)) + (pad "2" thru_hole circle (at 16.5 0) (size 1.35 1.35) (drill 0.9) (layers "*.Cu" "*.Mask") + (net 20 "Net-(SGNL_B1-Pin_1)") (pintype "passive") (tstamp a3912331-601a-47cb-ac46-8d8144f6a5d9)) + (model "RGP0207CHK1G0.stp" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "R1Go:RESAD1650W70L650D250" (layer "F.Cu") + (tstamp 511ee32a-67bc-40fe-a005-09ae35c9667b) + (at 74.01 82.5) + (descr "RGP0207CHK1G0") + (tags "Resistor") + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Resistor") + (property "ki_keywords" "R res resistor") + (path "/a3724ff5-8cb6-46d0-b421-63da8a253dc7") + (attr through_hole) + (fp_text reference "R10" (at 0.63 2.54) (layer "F.SilkS") + (effects (font (size 1.27 1.27) (thickness 0.254))) + (tstamp c5c81eb8-6711-43b2-acad-eaf5c7b879c4) + ) + (fp_text value "1G" (at 0 0) (layer "F.SilkS") hide + (effects (font (size 1.27 1.27) (thickness 0.254))) + (tstamp f086b580-57d9-468f-aec6-1963fefd2be1) + ) + (fp_text user "${REFERENCE}" (at 0.63 2.54) (layer "F.Fab") + (effects (font (size 1.27 1.27) (thickness 0.254))) + (tstamp ed575cdb-9053-46a4-9d34-fada42a46b08) + ) + (fp_line (start 1.025 0) (end 5 0) + (stroke (width 0.2) (type solid)) (layer "F.SilkS") (tstamp 7974632e-a7fd-4dc4-9022-ae21568dfdab)) + (fp_line (start 5 -1.25) (end 11.5 -1.25) + (stroke (width 0.2) (type solid)) (layer "F.SilkS") (tstamp a44bb3d9-77ad-4599-8e80-ffc9ced10332)) + (fp_line (start 5 1.25) (end 5 -1.25) + (stroke (width 0.2) (type solid)) (layer "F.SilkS") (tstamp 32b03cd3-00fb-43a8-855c-2e5ad844592a)) + (fp_line (start 11.5 -1.25) (end 11.5 1.25) + (stroke (width 0.2) (type solid)) (layer "F.SilkS") (tstamp a6c1952d-ad17-424d-a8c5-4df6ea8c9b9b)) + (fp_line (start 11.5 0) (end 15.475 0) + (stroke (width 0.2) (type solid)) (layer "F.SilkS") (tstamp 82205807-5925-4f22-96ef-e7caca865b65)) + (fp_line (start 11.5 1.25) (end 5 1.25) + (stroke (width 0.2) (type solid)) (layer "F.SilkS") (tstamp 86954dfc-743d-4881-bd42-406c34e21c4f)) + (fp_line (start -0.925 -1.6) (end 17.425 -1.6) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp d3fd7d17-fe9e-4786-956c-d9870573d16c)) + (fp_line (start -0.925 1.6) (end -0.925 -1.6) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 37224075-86d9-47bc-bb9e-f92cfa8ef84d)) + (fp_line (start 17.425 -1.6) (end 17.425 1.6) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 24c753d4-741a-4583-bd3a-0ee3208172f5)) + (fp_line (start 17.425 1.6) (end -0.925 1.6) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 29087955-a82b-41e7-995f-f2a0581adb29)) + (fp_line (start 0 0) (end 5 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 2b4d77e4-d8a8-4c5e-8348-2e3891df195a)) + (fp_line (start 5 -1.25) (end 11.5 -1.25) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 480e923f-3c25-45d7-944a-0b387355e824)) + (fp_line (start 5 1.25) (end 5 -1.25) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 6c18156c-8a98-4a5a-ab8f-771fbaa32118)) + (fp_line (start 11.5 -1.25) (end 11.5 1.25) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp bdfcedcd-4d2c-40b2-a92d-35551a10a6af)) + (fp_line (start 11.5 0) (end 16.5 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp e5ce0a63-afee-4f28-94fd-12186d2e3684)) + (fp_line (start 11.5 1.25) (end 5 1.25) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp f87dc0cb-5eeb-4b58-94b8-3792883479d8)) + (pad "1" thru_hole circle (at 0 0) (size 1.35 1.35) (drill 0.9) (layers "*.Cu" "*.Mask") + (net 8 "Net-(C5-Pad1)") (pintype "passive") (tstamp 5a6c052a-d6ea-460b-984d-29426d71e7ea)) + (pad "2" thru_hole circle (at 16.5 0) (size 1.35 1.35) (drill 0.9) (layers "*.Cu" "*.Mask") + (net 17 "Net-(SGNL_A1-Pin_1)") (pintype "passive") (tstamp 1fecd301-41d2-4f17-8241-372746319e52)) + (model "RGP0207CHK1G0.stp" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "C47u63v:CAPPRD350W65D800H1250" (layer "F.Cu") + (tstamp 57f1cd55-3f2c-438f-b4c2-4f5d150ecffc) + (at 77.18 135.84) + (descr "EEU-EB1J470SJ-1") + (tags "Capacitor Polarised") + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Polarized capacitor") + (property "ki_keywords" "cap capacitor") + (path "/225d2ae8-3230-4005-a4b4-2094ff960f52") + (attr through_hole) + (fp_text reference "C4" (at 1.91582 2.097292) (layer "F.SilkS") + (effects (font (size 1.27 1.27) (thickness 0.254))) + (tstamp 82096ada-3ded-44cf-bd75-8959c327a174) + ) + (fp_text value "47uF 63v" (at 0 0) (layer "F.SilkS") hide + (effects (font (size 1.27 1.27) (thickness 0.254))) + (tstamp 5ad46f85-f25b-4bd1-82ed-795913f1666d) + ) + (fp_circle (center 1.75 0) (end 1.75 4) + (stroke (width 0.2) (type solid)) (fill none) (layer "F.SilkS") (tstamp d4102372-978f-42a1-a90d-41d236206e20)) + (fp_circle (center 1.75 0) (end 1.75 4) + (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 7787f7ca-8876-47c6-bb05-6c14aebedc41)) + (pad "1" thru_hole rect (at 0 0) (size 1.275 1.275) (drill 0.85) (layers "*.Cu" "*.Mask") + (net 6 "Net-(C4-Pad1)") (pintype "passive") (tstamp a6779f9f-6a23-40bc-961e-0b8261bdce78)) + (pad "2" thru_hole circle (at 3.5 0) (size 1.275 1.275) (drill 0.85) (layers "*.Cu" "*.Mask") + (net 7 "Net-(C4-Pad2)") (pintype "passive") (tstamp 7f2ab19a-976a-456a-8fad-601874d85423)) + (model "EEU-EB1J470SJ.stp" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Library:conn_holepad" (layer "F.Cu") + (tstamp 5e40555e-2a89-4573-9a30-23f8a46b86ad) + (at 61.94 156.16) + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Generic connector, single row, 01x01, script generated") + (property "ki_keywords" "connector") + (path "/cb6e0e92-8106-4918-9d8c-3e3013d6e7e1") + (attr through_hole) + (fp_text reference "X3B1" (at 0.016458 2.494589 unlocked) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.1))) + (tstamp 30a5f286-250d-4a3c-9f3a-4f3ed4a1e0fa) + ) + (fp_text value "Conn_01x01_Pin" (at 0 1 unlocked) (layer "F.Fab") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp b6432240-0ae5-4008-b659-2d7da56c7894) + ) + (fp_text user "${REFERENCE}" (at 0 2.5 unlocked) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 99f21f5f-21c1-4ef8-a0c8-a5a1b720aba9) + ) + (pad "1" thru_hole circle (at 0 0) (size 3 3) (drill 1.5) (layers "*.Cu" "*.Mask") + (net 25 "Net-(X3B1-Pin_1)") (pinfunction "Pin_1") (pintype "passive") (tstamp abdbdf51-9f1a-417f-a17c-6991518f0831)) + ) + + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") + (tstamp 6a95d45f-4519-4910-bd01-b4336f829f93) + (at 61.94 128.22 -90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Resistor") + (property "ki_keywords" "R res resistor") + (path "/9a83ce8c-c4ea-4707-8978-a44f631e4fc0") + (attr through_hole) + (fp_text reference "R12" (at 2.915049 -2.449104 -180) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 95885942-92e5-4336-add5-a2ba35600eff) + ) + (fp_text value "47" (at 1.27 1.92 -90) (layer "F.Fab") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 7556e769-713c-42b0-8e52-81caf6b8a4ed) + ) + (fp_line (start 0.92 0) (end 1.54 0) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 88f7a153-3c40-4d8d-8e04-42edb8032c01)) + (fp_circle (center 0 0) (end 0.92 0) + (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp ad112007-8408-4e1d-a96b-c679b440039a)) + (fp_line (start -1.05 -1.05) (end -1.05 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 4381bf1e-59cb-4e33-8f51-6396028cb0ab)) + (fp_line (start -1.05 1.05) (end 3.49 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp ac8679ee-a570-4285-beaf-41b481358ff8)) + (fp_line (start 3.49 -1.05) (end -1.05 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp cd2728a6-cbf9-4086-93a2-472dd5bec58e)) + (fp_line (start 3.49 1.05) (end 3.49 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp f2727568-393a-4706-9c58-a6867848526d)) + (fp_line (start 0 0) (end 2.54 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 814bee79-5ee9-491c-b583-6ba5c17fdf16)) + (fp_circle (center 0 0) (end 0.8 0) + (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 316744c1-0e96-4874-b09f-28721d28a9c5)) + (pad "1" thru_hole circle (at 0 0 270) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 13 "Net-(C11-Pad1)") (pintype "passive") (tstamp cb6ccae2-58ed-4069-aacb-cc35c7c95063)) + (pad "2" thru_hole oval (at 2.54 0 270) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 26 "Net-(X2B1-Pin_1)") (pintype "passive") (tstamp b0c91d99-9800-421c-83ad-05b0c7bcde76)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") + (tstamp 70727d25-e90e-4f97-a2c4-19ef1c2db17a) + (at 82.26 95.2) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Resistor") + (property "ki_keywords" "R res resistor") + (path "/6bc81894-9db7-4be7-a876-2de954b2e8d4") + (attr through_hole) + (fp_text reference "R8" (at -0.258837 1.734976) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 3e611c63-801e-46e9-86f7-ddc50e28500a) + ) + (fp_text value "47K" (at 1.27 1.92) (layer "F.Fab") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 8ab7a06b-c99d-4344-948a-c34e639a1293) + ) + (fp_line (start 0.92 0) (end 1.54 0) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 72332f31-d254-4b7d-bb98-67a3ecf53cd0)) + (fp_circle (center 0 0) (end 0.92 0) + (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp dbb33cd9-018e-4d7b-ae36-e97d83a18f0b)) + (fp_line (start -1.05 -1.05) (end -1.05 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 5bfa8fa6-e47f-429e-9267-97501f54c005)) + (fp_line (start -1.05 1.05) (end 3.49 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp e63217f6-e95c-4d83-9128-5fe2bf0307fe)) + (fp_line (start 3.49 -1.05) (end -1.05 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 26fd6a13-7c19-4e62-a717-28d9800c7e52)) + (fp_line (start 3.49 1.05) (end 3.49 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 59cdf935-d918-4629-9a24-844a65b45ce3)) + (fp_line (start 0 0) (end 2.54 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 75949e46-71ae-42a3-bdbf-6acf6818cd0a)) + (fp_circle (center 0 0) (end 0.8 0) + (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp d3e61387-093f-4be7-b181-0b4c0a3edeb9)) + (pad "1" thru_hole circle (at 0 0) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 9 "Net-(VCC_A2-Pin_1)") (pintype "passive") (tstamp f7a268ac-3442-4517-a027-1ae5bc623840)) + (pad "2" thru_hole oval (at 2.54 0) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 8 "Net-(C5-Pad1)") (pintype "passive") (tstamp 15440508-6b49-427a-94cd-13d5773a99f4)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") + (tstamp 745fa253-fc6b-4da8-b153-6b4fca625b32) + (at 82.26 128.22 -90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Resistor") + (property "ki_keywords" "R res resistor") + (path "/e7bc09ca-c05b-46b5-a6ac-36183d8d76a3") + (attr through_hole) + (fp_text reference "R2" (at 2.958884 -1.980753 -180) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp a517cc3f-6e9e-4271-a99a-07a6f04e0cdb) + ) + (fp_text value "47" (at 1.27 1.92 -90) (layer "F.Fab") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 2daa1a04-b9c4-46f5-af0b-171fd3490c07) + ) + (fp_line (start 0.92 0) (end 1.54 0) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp c3741035-4127-46ee-b322-d339618cd69f)) + (fp_circle (center 0 0) (end 0.92 0) + (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp e3823e06-9efd-4f4e-8ee5-47273c5b42e1)) + (fp_line (start -1.05 -1.05) (end -1.05 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 79c9ebfb-7e18-4f6d-8309-5deb5e77e1e2)) + (fp_line (start -1.05 1.05) (end 3.49 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 21cbafd0-bc53-4dab-acba-c038266db131)) + (fp_line (start 3.49 -1.05) (end -1.05 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 49ffcd0c-9ae3-42bd-a1ea-1e54a66a97fd)) + (fp_line (start 3.49 1.05) (end 3.49 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 34f5eceb-df9b-434b-a7f0-4b41a05c335c)) + (fp_line (start 0 0) (end 2.54 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 6d6641b2-49aa-4349-ba42-f60171ef5ef6)) + (fp_circle (center 0 0) (end 0.8 0) + (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp afa9d047-e99c-4bc6-b3b5-01d5d442aba0)) + (pad "1" thru_hole circle (at 0 0 270) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 6 "Net-(C4-Pad1)") (pintype "passive") (tstamp e1b10bd0-8cab-4414-aaf4-14cf087e9d4e)) + (pad "2" thru_hole oval (at 2.54 0 270) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 24 "Net-(X2A1-Pin_1)") (pintype "passive") (tstamp e6729b8e-23fe-4d05-9615-7ca7671bf626)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") + (tstamp 7472e516-6d6f-42aa-aff0-409e97b9c722) + (at 82.26 115.52 90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "Sim.Device" "D") + (property "Sim.Pins" "1=K 2=A") + (property "ki_description" "Diode") + (property "ki_keywords" "diode") + (path "/04786958-d145-4302-af4f-030967ac2a8a") + (attr through_hole) + (fp_text reference "D1" (at -0.564033 2.014328) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp ffd6cd47-439a-4bbe-9753-dd65d13040da) + ) + (fp_text value "12V" (at 1.27 1.92 90) (layer "F.Fab") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 752cf63f-5d23-4dc4-817a-a293d9be6234) + ) + (fp_line (start 0.92 0) (end 1.54 0) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 0224cf19-064c-494b-82b4-98171a22933e)) + (fp_circle (center 0 0) (end 0.92 0) + (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp 993e43d6-d0ab-428f-85bc-ae5bcf149a49)) + (fp_line (start -1.05 -1.05) (end -1.05 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp abb9a96d-08a8-46e6-a1f1-b0846347ca6a)) + (fp_line (start -1.05 1.05) (end 3.49 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 92183174-45ed-4b2a-b139-5ac7bf3b7546)) + (fp_line (start 3.49 -1.05) (end -1.05 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 46cac06e-fab6-4272-9732-bfad65d29f81)) + (fp_line (start 3.49 1.05) (end 3.49 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp b1c35bab-a00e-4782-a36b-79e79e988f5d)) + (fp_line (start 0 0) (end 2.54 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 2919f9e8-6ec9-4b2a-ba3a-c916e973035b)) + (fp_circle (center 0 0) (end 0.8 0) + (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp eb481af8-d85c-4ce6-a652-43b00abdcc39)) + (pad "1" thru_hole circle (at 0 0 90) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 1 "Net-(D1-K)") (pinfunction "K") (pintype "passive") (tstamp 4588228a-a974-4b52-afde-3bd24b303adf)) + (pad "2" thru_hole oval (at 2.54 0 90) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 4 "GND") (pinfunction "A") (pintype "passive") (tstamp 73e20179-02ea-4a65-9a4f-0a706a4c9c9d)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "C.022uF50v:K223K15X7RF5UL2" (layer "F.Cu") + (tstamp 777a2a11-51b6-4ba0-a284-b026e2b2353a) + (at 84.8 90.12 90) + (descr "K223K15X7RF5UL2-1") + (tags "Capacitor") + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Unpolarized capacitor") + (property "ki_keywords" "cap capacitor") + (path "/57c290cf-4a3a-4689-a5cc-79dd666271df") + (attr through_hole) + (fp_text reference "C6" (at -2.218904 -0.082977 180) (layer "F.SilkS") + (effects (font (size 1.27 1.27) (thickness 0.254))) + (tstamp a4f65e3a-dbd2-44a3-b1c5-9975be850695) + ) + (fp_text value "0.1uF" (at 1.25 0 90) (layer "F.SilkS") hide + (effects (font (size 1.27 1.27) (thickness 0.254))) + (tstamp f867c9ac-9208-4dae-b13e-f7a83fbe91a4) + ) + (fp_line (start -0.75 -1.3) (end 3.25 -1.3) + (stroke (width 0.1) (type solid)) (layer "F.SilkS") (tstamp d40b2379-d455-462c-a1b7-0a8450946868)) + (fp_line (start -0.75 -1) (end -0.75 -1.3) + (stroke (width 0.1) (type solid)) (layer "F.SilkS") (tstamp 0d4bd84a-5607-45fb-87fb-139520d7a0f1)) + (fp_line (start -0.75 1) (end -0.75 1.3) + (stroke (width 0.1) (type solid)) (layer "F.SilkS") (tstamp bcbb11f6-f2b2-494c-8850-cf4b4f829176)) + (fp_line (start -0.75 1.3) (end 3.25 1.3) + (stroke (width 0.1) (type solid)) (layer "F.SilkS") (tstamp 6b001352-3195-4298-baa5-3df16eb94116)) + (fp_line (start 3.25 -1.3) (end 3.25 -1) + (stroke (width 0.1) (type solid)) (layer "F.SilkS") (tstamp a475d7c7-8820-4801-af00-0fcbcca38990)) + (fp_line (start 3.25 1.3) (end 3.25 1) + (stroke (width 0.1) (type solid)) (layer "F.SilkS") (tstamp 59319f7d-fe92-451d-990d-363cbca24416)) + (fp_line (start -1.25 -1.8) (end 3.75 -1.8) + (stroke (width 0.1) (type solid)) (layer "F.CrtYd") (tstamp 7baec531-e6a6-458b-a317-1988ff17822e)) + (fp_line (start -1.25 1.8) (end -1.25 -1.8) + (stroke (width 0.1) (type solid)) (layer "F.CrtYd") (tstamp aac5680b-f51b-4db4-b343-1bd513dfea4f)) + (fp_line (start 3.75 -1.8) (end 3.75 1.8) + (stroke (width 0.1) (type solid)) (layer "F.CrtYd") (tstamp c851eff6-5ab5-4129-a309-bbf8c82d7558)) + (fp_line (start 3.75 1.8) (end -1.25 1.8) + (stroke (width 0.1) (type solid)) (layer "F.CrtYd") (tstamp 86f516d8-4335-491f-b766-a3db1be23d8b)) + (fp_line (start -0.75 -1.3) (end 3.25 -1.3) + (stroke (width 0.2) (type solid)) (layer "F.Fab") (tstamp 011e2610-78b5-4cab-96d7-0f99d08a59fa)) + (fp_line (start -0.75 1.3) (end -0.75 -1.3) + (stroke (width 0.2) (type solid)) (layer "F.Fab") (tstamp db2af17f-2eb4-4f2b-b59e-eb5c8504eb43)) + (fp_line (start 3.25 -1.3) (end 3.25 1.3) + (stroke (width 0.2) (type solid)) (layer "F.Fab") (tstamp 83838809-c2f3-4cb0-8c78-517af44e787b)) + (fp_line (start 3.25 1.3) (end -0.75 1.3) + (stroke (width 0.2) (type solid)) (layer "F.Fab") (tstamp c1a01b22-728e-46d6-96ef-30e776faf4fa)) + (pad "1" thru_hole circle (at 0 0 90) (size 1.2 1.2) (drill 0.75) (layers "*.Cu" "*.Mask") + (net 9 "Net-(VCC_A2-Pin_1)") (pintype "passive") (tstamp d2fa98eb-94f3-4395-b54d-d4291f80c27f)) + (pad "2" thru_hole circle (at 2.5 0 90) (size 1.2 1.2) (drill 0.75) (layers "*.Cu" "*.Mask") + (net 2 "Earth") (pintype "passive") (tstamp 448d6ed4-1c1f-4bea-a65e-151ed27dfe57)) + (model "K223K15X7RF5UL2.stp" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "MountingHole:MountingHole_2.7mm_M2.5_ISO14580" (layer "F.Cu") + (tstamp 7f03512d-5430-4f6b-989a-c57dddec5941) + (at 86.495 77.591) + (descr "Mounting Hole 2.7mm, no annular, M2.5, ISO14580") + (tags "mounting hole 2.7mm no annular m2.5 iso14580") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Mounting Hole without connection") + (property "ki_keywords" "mounting hole") + (attr exclude_from_pos_files) + (fp_text reference "H2" (at 0 -3.25) (layer "F.SilkS") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 8c84fe77-0de7-4088-a65e-4dddda1e9add) + ) + (fp_text value "M2.5" (at 0 3.25) (layer "F.Fab") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 8fc6e3fc-39d3-4a90-920b-1879c4c60efe) + ) + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 88414f96-11bc-4b42-a55b-9c68a12fe7d3) + ) + (fp_circle (center 0 0) (end 2.25 0) + (stroke (width 0.15) (type solid)) (fill none) (layer "Cmts.User") (tstamp 3d8ade6d-3490-4a27-8a42-8c4f9b2b216b)) + (fp_circle (center 0 0) (end 2.5 0) + (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd") (tstamp d740fdd3-3381-4e68-abba-3550b800a4b9)) + (pad "" np_thru_hole oval (at 0 0) (size 3.5 2.7) (drill oval 3.5 2.7) (layers "F&B.Cu" "*.Mask") (tstamp d10210f0-ec59-438e-a0e2-3e35204b58ab)) + ) + + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") + (tstamp 8222916a-afda-4ca0-9014-a8d49bfd5eca) + (at 77.18 102.82) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Resistor") + (property "ki_keywords" "R res resistor") + (path "/333c6bef-4cf7-4319-b480-a4d554049f1a") + (attr through_hole) + (fp_text reference "R9" (at -0.269833 1.725355) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp fe03fcd1-3a46-4641-b4a4-6271a9c4a05c) + ) + (fp_text value "2.2K" (at 1.27 1.92) (layer "F.Fab") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 3d136940-b473-4bb7-b7fc-a37a3d1f627d) + ) + (fp_line (start 0.92 0) (end 1.54 0) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 90ef6fdf-2801-46ca-ad22-7ac678cd6738)) + (fp_circle (center 0 0) (end 0.92 0) + (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp 8c0e6bf2-9834-4387-9f20-62f75692ddea)) + (fp_line (start -1.05 -1.05) (end -1.05 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 5349220a-ce3f-4604-835f-2e97f62acc5d)) + (fp_line (start -1.05 1.05) (end 3.49 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp ba228c7b-fd34-408a-8a2b-4a1c916b760e)) + (fp_line (start 3.49 -1.05) (end -1.05 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp ae8ab25a-71ea-40a8-a5f6-02d2dd7f0a61)) + (fp_line (start 3.49 1.05) (end 3.49 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 63f24955-dcd9-4332-a2a3-07f1e5914fcf)) + (fp_line (start 0 0) (end 2.54 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp d8c4b57b-464b-4294-82a2-41d2f3cd66d9)) + (fp_circle (center 0 0) (end 0.8 0) + (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp cc1ebe5c-f4c9-4b70-83eb-e60fb874dc79)) + (pad "1" thru_hole circle (at 0 0) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 18 "Net-(IC1-Pad3)") (pintype "passive") (tstamp c150de42-16be-4fdc-853c-5f7149aceb59)) + (pad "2" thru_hole oval (at 2.54 0) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 19 "Net-(IC1-Pad6)") (pintype "passive") (tstamp a513bcd0-e8d2-493e-889c-f7069e4a27f5)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") + (tstamp 87039480-541e-4ba1-8b4c-becebf7d9ca0) + (at 56.86 115.52 90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "Sim.Device" "D") + (property "Sim.Pins" "1=K 2=A") + (property "ki_description" "Diode") + (property "ki_keywords" "diode") + (path "/60bb60f7-d540-494b-9a5e-5a737fa70d44") + (attr through_hole) + (fp_text reference "D2" (at -0.591079 1.95189) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 1235d70f-2098-481f-ab42-9da8c8985f0e) + ) + (fp_text value "12V" (at 1.27 1.92 90) (layer "F.Fab") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp dc161806-2a08-47ac-aa0b-6d28839e8d72) + ) + (fp_line (start 0.92 0) (end 1.54 0) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 0a57cbbb-36e7-49f4-8388-e321f682968c)) + (fp_circle (center 0 0) (end 0.92 0) + (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp b8e79ce5-adc7-42e7-8264-18dfda5ab300)) + (fp_line (start -1.05 -1.05) (end -1.05 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp b8e6d07c-596c-44ef-9bed-c266491f9a4b)) + (fp_line (start -1.05 1.05) (end 3.49 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 5d3b86c5-23ed-4f8d-b4f9-2f0a6f2b5371)) + (fp_line (start 3.49 -1.05) (end -1.05 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 206ed511-f19b-4e42-8589-0130ee9ff6b3)) + (fp_line (start 3.49 1.05) (end 3.49 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 2635a543-dd70-4118-892f-2536c0e2a23a)) + (fp_line (start 0 0) (end 2.54 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 8a9fb8a9-f82e-421c-9a3d-efda6114a0d6)) + (fp_circle (center 0 0) (end 0.8 0) + (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp c5aa4b15-3a49-4e48-aa4b-93fb9434694b)) + (pad "1" thru_hole circle (at 0 0 90) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 10 "Net-(D2-K)") (pinfunction "K") (pintype "passive") (tstamp 43fb71e1-af97-4bb0-bbba-19e9c758b00f)) + (pad "2" thru_hole oval (at 2.54 0 90) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 4 "GND") (pinfunction "A") (pintype "passive") (tstamp e0afb2aa-fd20-4f27-aa21-405c17a841ad)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") + (tstamp 88eee050-1f6e-4b7d-956e-b68a6d184d3d) + (at 61.94 105.36 -90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Resistor") + (property "ki_keywords" "R res resistor") + (path "/ecfd7613-45e7-4949-88b5-f33fd1e3a59e") + (attr through_hole) + (fp_text reference "R15" (at 2.975622 -2.430451) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp e84e0394-33f4-4f73-bb5a-3c497fb44bba) + ) + (fp_text value "200" (at 1.27 1.92 90) (layer "F.Fab") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp cc50b4db-f9a4-47e4-9c5a-de4f6b9b372e) + ) + (fp_line (start 0.92 0) (end 1.54 0) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp d7889851-719a-4f0e-a5ef-37303f437a10)) + (fp_circle (center 0 0) (end 0.92 0) + (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp cb9c4244-3998-44f5-b623-2c6a639f9c67)) + (fp_line (start -1.05 -1.05) (end -1.05 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp bded68ca-02e0-4891-bc91-9a7efd46d714)) + (fp_line (start -1.05 1.05) (end 3.49 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 363dfcd3-2abe-44cd-a8ae-47046bff7491)) + (fp_line (start 3.49 -1.05) (end -1.05 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 7ca39ae6-a869-4917-9211-de348471e2e5)) + (fp_line (start 3.49 1.05) (end 3.49 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 04dcb482-be1c-4aef-81c7-82e050eceb6f)) + (fp_line (start 0 0) (end 2.54 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp f9930ee4-73dc-47c3-a61b-6e6ee1265373)) + (fp_circle (center 0 0) (end 0.8 0) + (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 2f2d545f-1858-4dd5-a4ee-e52d44c257b0)) + (pad "1" thru_hole circle (at 0 0 270) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 16 "Net-(VCC_B2-Pin_1)") (pintype "passive") (tstamp c7011c0b-56aa-440b-9bd4-feaddb54374d)) + (pad "2" thru_hole oval (at 2.54 0 270) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 10 "Net-(D2-K)") (pintype "passive") (tstamp c6ab1031-4d70-424e-9213-8ef3496d68ff)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") + (tstamp 930fb205-d5cd-48f9-a781-9004a9399450) + (at 61.94 115.52 90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Unpolarized capacitor") + (property "ki_keywords" "cap capacitor") + (path "/0074ef94-0d36-4108-8f14-b1d064783f91") + (attr through_hole) + (fp_text reference "C8" (at -0.613463 1.997704) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 40966c82-ce75-4b79-8949-185ad92092bb) + ) + (fp_text value "0.1uF" (at 1.27 1.92 90) (layer "F.Fab") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp d5a5f12a-7151-4e16-9321-d859c322c039) + ) + (fp_line (start 0.92 0) (end 1.54 0) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 0d325ce5-9686-46e1-9710-553c86fad016)) + (fp_circle (center 0 0) (end 0.92 0) + (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp 232f966d-1a71-4f43-a9cc-c02258ab6ef5)) + (fp_line (start -1.05 -1.05) (end -1.05 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp e325372f-b4a1-4c37-a40d-a7deb804eba1)) + (fp_line (start -1.05 1.05) (end 3.49 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp f2c5b4b1-2c5c-4bdb-96b1-5b4a00bf5ecf)) + (fp_line (start 3.49 -1.05) (end -1.05 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 6b6605b9-1d95-4609-af46-2b13c6043844)) + (fp_line (start 3.49 1.05) (end 3.49 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 99d0fa06-d55e-4736-a715-055daa0c5d70)) + (fp_line (start 0 0) (end 2.54 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 417cc6a6-89c8-4f98-853c-cdcde77c0d4c)) + (fp_circle (center 0 0) (end 0.8 0) + (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 246f1a83-7735-4299-904e-687af4cc2121)) + (pad "1" thru_hole circle (at 0 0 90) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 10 "Net-(D2-K)") (pintype "passive") (tstamp 04c2d50b-f84b-4b00-9c08-d75289fd0c43)) + (pad "2" thru_hole oval (at 2.54 0 90) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 4 "GND") (pintype "passive") (tstamp 229161d5-9ab3-4020-8df7-6107acbc7bac)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") + (tstamp 959d4b1a-fc40-4583-b414-2275fb79e479) + (at 82.26 105.36 -90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Resistor") + (property "ki_keywords" "R res resistor") + (path "/7f13f25b-68e1-44e1-992e-6e69c71b1400") + (attr through_hole) + (fp_text reference "R5" (at 2.956969 -2.014328 -180) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp e24cc170-5302-456e-aeca-910cb0640507) + ) + (fp_text value "200" (at 1.27 1.92 -90) (layer "F.Fab") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp e8289d04-0393-4a67-9ddf-3a5c9d0fa599) + ) + (fp_line (start 0.92 0) (end 1.54 0) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp d3f7b3a8-d135-401e-8064-8ad0069d43c9)) + (fp_circle (center 0 0) (end 0.92 0) + (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp 81fe116a-52c3-429f-9aed-1586910c406e)) + (fp_line (start -1.05 -1.05) (end -1.05 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 3b904076-a20d-4b59-ae30-4e3c5d8e3f16)) + (fp_line (start -1.05 1.05) (end 3.49 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 89181fdb-23b4-4ea1-b31e-b0eff898a7d0)) + (fp_line (start 3.49 -1.05) (end -1.05 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp e1f22170-d15b-4801-ac28-f748ddf101ed)) + (fp_line (start 3.49 1.05) (end 3.49 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp bf57fa49-14f5-41f9-9acd-09d4d23a11da)) + (fp_line (start 0 0) (end 2.54 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp a193c140-1c13-4217-92f5-4ffc95ed767a)) + (fp_circle (center 0 0) (end 0.8 0) + (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 6f5ffd86-4625-4173-8d26-1174d5496705)) + (pad "1" thru_hole circle (at 0 0 270) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 9 "Net-(VCC_A2-Pin_1)") (pintype "passive") (tstamp e8c3d387-00c8-4398-a83a-9365ebf93a43)) + (pad "2" thru_hole oval (at 2.54 0 270) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 1 "Net-(D1-K)") (pintype "passive") (tstamp 58b5a7c0-9f6e-4e46-85bc-5db95e418a01)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Library:conn_holepad" (layer "F.Cu") + (tstamp 95f3cf11-5e3e-4f4f-ad36-1e7c81240b7f) + (at 82.26 156.16) + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Generic connector, single row, 01x01, script generated") + (property "ki_keywords" "connector") + (path "/caa6c8b8-ee7b-44c3-a728-7e55c5ac92d4") + (attr through_hole) + (fp_text reference "X3A1" (at -0.039043 2.524434 unlocked) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.1))) + (tstamp ca690d1f-83c1-45bb-babc-efa06be639dc) + ) + (fp_text value "Conn_01x01_Pin" (at 0 1 unlocked) (layer "F.Fab") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 42ce4a1a-b352-4d63-86f8-1877213d9cb7) + ) + (fp_text user "${REFERENCE}" (at 0 2.5 unlocked) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 7931f949-744c-4070-b5b9-9141b8124a2d) + ) + (pad "1" thru_hole circle (at 0 0) (size 3 3) (drill 1.5) (layers "*.Cu" "*.Mask") + (net 23 "Net-(X3A1-Pin_1)") (pinfunction "Pin_1") (pintype "passive") (tstamp 1096f159-2fd7-4d0f-8c49-5e8e92f1ac73)) + ) + + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") + (tstamp 96edd9a0-1961-43b7-abec-2fcd9dc521f8) + (at 59.4 95.2) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Resistor") + (property "ki_keywords" "R res resistor") + (path "/dffbb023-66a6-4908-bab6-7170bcf5a1bb") + (attr through_hole) + (fp_text reference "R18" (at 0.212099 1.734976) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 7d01e317-e30d-4099-9024-f03be67c49ad) + ) + (fp_text value "47K" (at 1.27 1.92) (layer "F.Fab") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp ba3fee32-5607-4e2d-8c80-bfa3f4f0643f) + ) + (fp_line (start 0.92 0) (end 1.54 0) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 941cde38-2805-4446-8659-7045ce2defdd)) + (fp_circle (center 0 0) (end 0.92 0) + (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp 96c32c3a-b018-4d93-b5ef-63127a8581b0)) + (fp_line (start -1.05 -1.05) (end -1.05 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp a9870692-2cf2-4816-a3ce-64f6e44ef8b0)) + (fp_line (start -1.05 1.05) (end 3.49 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 96852ad8-6479-4d59-bfd7-b9e66893bda7)) + (fp_line (start 3.49 -1.05) (end -1.05 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp cd907c6f-df83-4fdd-81e6-e955798d3470)) + (fp_line (start 3.49 1.05) (end 3.49 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp a04fad82-1cc8-49f3-896a-f04b357b4557)) + (fp_line (start 0 0) (end 2.54 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 3734aed0-0cae-4a81-b5c7-2adecc43f460)) + (fp_circle (center 0 0) (end 0.8 0) + (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 0b6fa5b7-9028-41fe-b3b1-d74fb8700b63)) + (pad "1" thru_hole circle (at 0 0) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 16 "Net-(VCC_B2-Pin_1)") (pintype "passive") (tstamp 1ba822b9-917a-43c2-b3f6-8db9cb7ec407)) + (pad "2" thru_hole oval (at 2.54 0) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 15 "Net-(C12-Pad1)") (pintype "passive") (tstamp 26895040-bb44-4da7-8f1e-68bb588e3ee6)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "C47u35v:CAPPRD200W50D525H1250" (layer "F.Cu") + (tstamp 99197f4c-2fe4-4089-b0fa-e89e30d9edc8) + (at 77.18 118.06 -90) + (descr "5*11") + (tags "Capacitor Polarised") + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Polarized capacitor") + (property "ki_keywords" "cap capacitor") + (path "/e99cf364-578f-476c-924e-844a1b1a8e85") + (attr through_hole) + (fp_text reference "C7" (at 4.844928 -0.6182) (layer "F.SilkS") + (effects (font (size 1.27 1.27) (thickness 0.254))) + (tstamp 86e5d921-e8e0-493b-83a4-fb49f4fa5c56) + ) + (fp_text value "47uF 35v" (at 0 0 90) (layer "F.SilkS") hide + (effects (font (size 1.27 1.27) (thickness 0.254))) + (tstamp f2ac2ce7-3672-4776-87b3-bc13e8c293dc) + ) + (fp_circle (center 1 0) (end 1 2.625) + (stroke (width 0.2) (type solid)) (fill none) (layer "F.SilkS") (tstamp f17d0654-baf1-43be-a44a-a8e29655dd2b)) + (fp_circle (center 1 0) (end 1 2.625) + (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 08ee4e0f-41a8-4ecd-aed7-39440055cbe5)) + (pad "1" thru_hole rect (at 0 0 270) (size 1.1 1.1) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 9 "Net-(VCC_A2-Pin_1)") (pintype "passive") (tstamp 465c2404-a3dd-4ed4-8c70-900027804e71)) + (pad "2" thru_hole circle (at 2 0 270) (size 1.1 1.1) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 2 "Earth") (pintype "passive") (tstamp 06f032a5-26c0-4697-afaf-b621b86d80b4)) + (model "UVZ1V470MDD1TA.stp" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") + (tstamp 99c3b2dd-1fe3-41c8-bfa0-f729178fe195) + (at 89.88 90.12 90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Resistor") + (property "ki_keywords" "R res resistor") + (path "/9073f975-3395-426e-a26b-e4f39deda04a") + (attr through_hole) + (fp_text reference "R7" (at -1.860768 -0.044624) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 692d2aa6-91ed-4927-ac36-d095b976a9dc) + ) + (fp_text value "47K" (at 1.27 1.92 90) (layer "F.Fab") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 188217de-9e22-4812-8857-52b8ed838eee) + ) + (fp_line (start 0.92 0) (end 1.54 0) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 391657fd-92d7-4fd2-bccb-6a03875eac4c)) + (fp_circle (center 0 0) (end 0.92 0) + (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp 1db74212-d692-4e1b-b4bd-a658f524ed32)) + (fp_line (start -1.05 -1.05) (end -1.05 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 35067d5e-e5a4-4f8d-a6b6-33b2cfd3edb8)) + (fp_line (start -1.05 1.05) (end 3.49 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 5e460e4e-a63e-4f00-a6a7-0661ca99b1a6)) + (fp_line (start 3.49 -1.05) (end -1.05 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp d7e27410-0677-4c4e-b058-367e26c8bebe)) + (fp_line (start 3.49 1.05) (end 3.49 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp cae7b1d2-616f-45cf-b639-87ad890f8e8e)) + (fp_line (start 0 0) (end 2.54 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 85d6eb9b-579b-45bd-9e49-b940e2b36e87)) + (fp_circle (center 0 0) (end 0.8 0) + (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 8aa682a4-9a8b-419a-a646-de3fc0367b4c)) + (pad "1" thru_hole circle (at 0 0 90) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 8 "Net-(C5-Pad1)") (pintype "passive") (tstamp c51d383a-b53a-4671-8a0c-96d419655fd4)) + (pad "2" thru_hole oval (at 2.54 0 90) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 4 "GND") (pintype "passive") (tstamp eb5a2e53-20bc-4282-b37c-0fa2d2fb1534)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Library:conn_holepad" (layer "F.Cu") + (tstamp 9e7b1d91-5ecd-4ac9-8f97-6818989902ee) + (at 67.02 156.16) + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Generic connector, single row, 01x01, script generated") + (property "ki_keywords" "connector") + (path "/9e00ee5d-3600-4941-9f50-ffa5b59f36da") + (attr through_hole) + (fp_text reference "X2B1" (at -0.004879 2.494589 unlocked) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.1))) + (tstamp 43813caf-7586-4993-b65c-5ab1960aca2c) + ) + (fp_text value "Conn_01x01_Pin" (at 0 1 unlocked) (layer "F.Fab") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp bdf7e597-4a99-404c-bf92-6b07911c38c9) + ) + (fp_text user "${REFERENCE}" (at 0 2.5 unlocked) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 846c5826-b5a8-4975-b14a-5205a1815a08) + ) + (pad "1" thru_hole circle (at 0 0) (size 3 3) (drill 1.5) (layers "*.Cu" "*.Mask") + (net 26 "Net-(X2B1-Pin_1)") (pinfunction "Pin_1") (pintype "passive") (tstamp d41ca2f8-9791-46f7-80af-83983bcb8fe6)) + ) + + (footprint "Library:conn_holepad" (layer "F.Cu") + (tstamp a4df7562-a290-407a-ab81-43fab86b5a61) + (at 77.18 69.8) + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Generic connector, single row, 01x01, script generated") + (property "ki_keywords" "connector") + (path "/8a06125c-2a98-42e5-987b-f3b86e05fdf0") + (attr through_hole) + (fp_text reference "SGNL_A1" (at 0 -0.5 unlocked) (layer "F.SilkS") hide + (effects (font (size 1 1) (thickness 0.1))) + (tstamp 2bc4b8e1-d431-481c-bc25-7df681101c5e) + ) + (fp_text value "Conn_01x01_Pin" (at 0 1 unlocked) (layer "F.Fab") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 3081efc6-5f2e-45d5-9bb2-c009835491ec) + ) + (pad "1" thru_hole circle (at 0 0) (size 3 3) (drill 1.5) (layers "*.Cu" "*.Mask") + (net 17 "Net-(SGNL_A1-Pin_1)") (pinfunction "Pin_1") (pintype "passive") (tstamp cf71c2cc-ae6c-46bd-97e1-d41546650fe7)) + ) + + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") + (tstamp aa6efbc5-6ba3-459f-9580-cd462fcda12c) + (at 87.34 115.52 90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Unpolarized capacitor") + (property "ki_keywords" "cap capacitor") + (path "/85f8809e-e152-4de2-87ff-91f95cdc3dd3") + (attr through_hole) + (fp_text reference "C1" (at -0.586416 2.015375) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp ebbab0e7-98de-41b6-b0cb-c788ec26123c) + ) + (fp_text value "0.1uF" (at 1.27 1.92 90) (layer "F.Fab") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 5c6adab0-2d60-41b4-bbc3-ac42d5a1c82e) + ) + (fp_line (start 0.92 0) (end 1.54 0) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 59a80458-4570-4521-bb70-04a7b47ca69a)) + (fp_circle (center 0 0) (end 0.92 0) + (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp 8c9a20c3-ea9c-4884-96e1-4d56069549b2)) + (fp_line (start -1.05 -1.05) (end -1.05 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 600363cc-f599-45b8-82cc-97ad84ada0f3)) + (fp_line (start -1.05 1.05) (end 3.49 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 24f025a1-3efa-47c2-a005-47860e3c5ef3)) + (fp_line (start 3.49 -1.05) (end -1.05 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 10f5d38a-7c6e-4919-8d15-c7303ae24b4c)) + (fp_line (start 3.49 1.05) (end 3.49 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp ee3862ec-9f0a-4293-8462-ed9a93b4676e)) + (fp_line (start 0 0) (end 2.54 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 5d96c95e-3ef0-4f19-85e8-ed3f64d3b4ed)) + (fp_circle (center 0 0) (end 0.8 0) + (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp d20545d5-6330-46fa-845d-98299a02fb8c)) + (pad "1" thru_hole circle (at 0 0 90) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 1 "Net-(D1-K)") (pintype "passive") (tstamp fafa54b4-7ce4-401c-90ac-82e976008a01)) + (pad "2" thru_hole oval (at 2.54 0 90) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 4 "GND") (pintype "passive") (tstamp d7be3e35-e20f-4d53-9cad-865efe817c1c)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Library:conn_holepad" (layer "F.Cu") + (tstamp ae236a0b-2833-4b1a-b543-6315ef73a5e5) + (at 83.53 69.8) + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Generic connector, single row, 01x01, script generated") + (property "ki_keywords" "connector") + (path "/c623b86b-7f7f-40b9-93e6-26635740e815") + (attr through_hole) + (fp_text reference "VCC_A2" (at 0 -0.5 unlocked) (layer "F.SilkS") hide + (effects (font (size 1 1) (thickness 0.1))) + (tstamp d4a06815-153a-44b7-98be-9be23dd99874) + ) + (fp_text value "Conn_01x01_Pin" (at 0 1 unlocked) (layer "F.Fab") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp eca0be31-9f7f-4545-972d-bfb6393a3a66) + ) + (pad "1" thru_hole circle (at 0 0) (size 3 3) (drill 1.5) (layers "*.Cu" "*.Mask") + (net 9 "Net-(VCC_A2-Pin_1)") (pinfunction "Pin_1") (pintype "passive") (tstamp f12ffd00-16b3-4975-83e7-a949d3ea280d)) + ) + + (footprint "Library:conn_holepad" (layer "F.Cu") + (tstamp b06caee4-0d58-4da3-b2b7-a0187d91e230) + (at 67.02 69.8) + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Generic connector, single row, 01x01, script generated") + (property "ki_keywords" "connector") + (path "/5927db5e-0de5-4020-a1e2-d3c795f23f3a") + (attr through_hole) + (fp_text reference "SGNL_B1" (at 0 -0.5 unlocked) (layer "F.SilkS") hide + (effects (font (size 1 1) (thickness 0.1))) + (tstamp a5870f43-5667-417d-8f22-e824b3f11f3e) + ) + (fp_text value "Conn_01x01_Pin" (at 0 1 unlocked) (layer "F.Fab") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 4ea611fb-e0e3-4ce4-8d5f-b6df2c9d67ef) + ) + (pad "1" thru_hole circle (at 0 0) (size 3 3) (drill 1.5) (layers "*.Cu" "*.Mask") + (net 20 "Net-(SGNL_B1-Pin_1)") (pinfunction "Pin_1") (pintype "passive") (tstamp 4cd77282-26c4-4a20-b562-8a563709271d)) + ) + + (footprint "C47u63v:CAPPRD350W65D800H1250" (layer "F.Cu") + (tstamp b5075aca-42d2-4f70-96dd-3872779dc083) + (at 63.52 146) + (descr "EEU-EB1J470SJ-1") + (tags "Capacitor Polarised") + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Polarized capacitor") + (property "ki_keywords" "cap capacitor") + (path "/90b176ff-c759-4172-98d6-a482a71dc515") + (attr through_hole) + (fp_text reference "C10" (at 1.709261 2.043428) (layer "F.SilkS") + (effects (font (size 1.27 1.27) (thickness 0.254))) + (tstamp 04109b5d-8e3d-466d-af92-2d3e23461013) + ) + (fp_text value "47uF 63v" (at 0 0) (layer "F.SilkS") hide + (effects (font (size 1.27 1.27) (thickness 0.254))) + (tstamp cf894c60-e36b-4996-9148-04c44f8822b4) + ) + (fp_text user "${REFERENCE}" (at 1.709261 2.043428) (layer "F.Fab") + (effects (font (size 1.27 1.27) (thickness 0.254))) + (tstamp aacf7dd8-53bc-4669-8fd0-d2c10ee3c884) + ) + (fp_circle (center 1.75 0) (end 1.75 4) + (stroke (width 0.2) (type solid)) (fill none) (layer "F.SilkS") (tstamp e5dc9451-87d8-41cb-9aba-07dd9c72d792)) + (fp_circle (center 1.75 0) (end 1.75 4) + (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 727123a4-062b-4900-9e6f-743331ddb861)) + (pad "1" thru_hole rect (at 0 0) (size 1.275 1.275) (drill 0.85) (layers "*.Cu" "*.Mask") + (net 11 "Net-(C10-Pad1)") (pintype "passive") (tstamp 72fa0ea7-e1ff-4997-8dd4-3dda2339d826)) + (pad "2" thru_hole circle (at 3.5 0) (size 1.275 1.275) (drill 0.85) (layers "*.Cu" "*.Mask") + (net 12 "Net-(C10-Pad2)") (pintype "passive") (tstamp c3a63387-05f2-48bc-8b7e-af16fd833770)) + (model "EEU-EB1J470SJ.stp" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") + (tstamp b84e8712-6efc-465e-95e6-3ac45935569c) + (at 87.34 120.6 -90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Resistor") + (property "ki_keywords" "R res resistor") + (path "/f8426791-547e-42ff-b8e0-5863e33d65fa") + (attr through_hole) + (fp_text reference "R3" (at 2.957313 -1.970608 -180) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 93ac7d19-d67c-45b8-a018-e66d0d693255) + ) + (fp_text value "2.2K" (at 1.27 1.92 -90) (layer "F.Fab") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp c002e533-0fea-41b3-ad7a-366d7df81023) + ) + (fp_line (start 0.92 0) (end 1.54 0) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp fabcbd8c-7383-4f28-b114-7b72a06c9db4)) + (fp_circle (center 0 0) (end 0.92 0) + (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp 91cb5219-3d6f-470e-bbb3-a67f1896486d)) + (fp_line (start -1.05 -1.05) (end -1.05 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp d0168173-bd98-4fe2-a2f9-108ce9cd7313)) + (fp_line (start -1.05 1.05) (end 3.49 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 82035587-db50-41ac-99bf-46552f523b4f)) + (fp_line (start 3.49 -1.05) (end -1.05 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 10563e31-80d1-400a-80f8-400fa4a9908e)) + (fp_line (start 3.49 1.05) (end 3.49 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 245990a2-da54-4dac-b95f-bffa48f885c6)) + (fp_line (start 0 0) (end 2.54 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 0b2c0b3b-30d1-4291-9664-2a73420c5026)) + (fp_circle (center 0 0) (end 0.8 0) + (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 50214740-bcbb-4169-96dc-e5e729a9abc9)) + (pad "1" thru_hole circle (at 0 0 270) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 1 "Net-(D1-K)") (pintype "passive") (tstamp cedec1a4-41e2-4f7c-ab31-82d215a27498)) + (pad "2" thru_hole oval (at 2.54 0 270) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 3 "Net-(C3-Pad1)") (pintype "passive") (tstamp afff5184-659d-42f6-bb50-57f31b58f697)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") + (tstamp bcd770fa-1ed0-48b0-8cbb-2f87dc5541a4) + (at 56.86 128.22 -90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Resistor") + (property "ki_keywords" "R res resistor") + (path "/4281c715-bfa5-4c1d-833f-007ae19a4629") + (attr through_hole) + (fp_text reference "R11" (at 2.989661 -2.425673 -180) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 9a4fa8ac-f6aa-4b1e-a05d-52c099ecae4f) + ) + (fp_text value "47" (at 1.27 1.92 -90) (layer "F.Fab") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 962b8959-cd71-424d-9398-040fad19f045) + ) + (fp_line (start 0.92 0) (end 1.54 0) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 0f00f251-48ff-4520-818f-2835947dbbb5)) + (fp_circle (center 0 0) (end 0.92 0) + (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp 1f82be44-c34c-45c4-a30e-d1d9d366e1e8)) + (fp_line (start -1.05 -1.05) (end -1.05 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp c004e9fc-9e95-467f-b958-961ff4734bc8)) + (fp_line (start -1.05 1.05) (end 3.49 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 817873f0-a5c6-4482-916c-b8bce3351ef6)) + (fp_line (start 3.49 -1.05) (end -1.05 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp ded4a380-55a3-4c46-9dee-d6b001bdd121)) + (fp_line (start 3.49 1.05) (end 3.49 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp be36d02b-41c4-493a-9114-68008531c09c)) + (fp_line (start 0 0) (end 2.54 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp cf4a0f84-049d-482e-bfa5-0f57f4c43070)) + (fp_circle (center 0 0) (end 0.8 0) + (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp f98b31ee-14a8-4d0a-abaa-9b47340b48fc)) + (pad "1" thru_hole circle (at 0 0 270) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 11 "Net-(C10-Pad1)") (pintype "passive") (tstamp 15d39eaf-4060-4dfa-b0c8-a68e2a2c5e4f)) + (pad "2" thru_hole oval (at 2.54 0 270) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 25 "Net-(X3B1-Pin_1)") (pintype "passive") (tstamp 0ab0880e-3789-4e75-baf6-f6b9fa2c8ffa)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Library:conn_holepad" (layer "F.Cu") + (tstamp c262cae7-d9e8-4f1f-a599-ab4800cab255) + (at 54.32 69.8) + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Generic connector, single row, 01x01, script generated") + (property "ki_keywords" "connector") + (path "/989fc3e9-94aa-4ae0-8fd0-530b54bc7c6a") + (attr through_hole) + (fp_text reference "GND_B1" (at 0 -0.5 unlocked) (layer "F.SilkS") hide + (effects (font (size 1 1) (thickness 0.1))) + (tstamp 94ee880b-62c4-4690-b8db-c8deb2a802c1) + ) + (fp_text value "Conn_01x01_Pin" (at 0 1 unlocked) (layer "F.Fab") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp d231f684-55fa-4bd0-89a8-90307185cb75) + ) + (pad "1" thru_hole circle (at 0 0) (size 3 3) (drill 1.5) (layers "*.Cu" "*.Mask") + (net 4 "GND") (pinfunction "Pin_1") (pintype "passive") (tstamp f252adea-92a7-4e02-b375-5662a1008766)) + ) + + (footprint "C47u35v:CAPPRD200W50D525H1250" (layer "F.Cu") + (tstamp c6f7ad19-b3e5-4c35-be9c-f49f41b71b9c) + (at 75.18 110.44) + (descr "5*11") + (tags "Capacitor Polarised") + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Polarized capacitor") + (property "ki_keywords" "cap capacitor") + (path "/4b15cc8f-884d-43ed-8a34-09c6b829c7ae") + (attr through_hole) + (fp_text reference "C5" (at 1.185658 3.822112) (layer "F.SilkS") + (effects (font (size 1.27 1.27) (thickness 0.254))) + (tstamp 24d7d41c-a663-47c1-8766-fb44e232409e) + ) + (fp_text value "47uF 35v" (at 0 0) (layer "F.SilkS") hide + (effects (font (size 1.27 1.27) (thickness 0.254))) + (tstamp b4f9aa59-0764-4eae-8c6d-9997b8fa7f0c) + ) + (fp_circle (center 1 0) (end 1 2.625) + (stroke (width 0.2) (type solid)) (fill none) (layer "F.SilkS") (tstamp 40116a95-4088-4a06-9824-3e994e651ff3)) + (fp_circle (center 1 0) (end 1 2.625) + (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 181d21fe-9b9e-4efc-9745-dea381a54c65)) + (pad "1" thru_hole rect (at 0 0) (size 1.1 1.1) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 8 "Net-(C5-Pad1)") (pintype "passive") (tstamp e476c53c-8951-41ac-bbc2-278126285c9f)) + (pad "2" thru_hole circle (at 2 0) (size 1.1 1.1) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 4 "GND") (pintype "passive") (tstamp 8a97c5c8-fa77-4792-bcb6-843f0102dd8e)) + (model "UVZ1V470MDD1TA.stp" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "C47u35v:CAPPRD200W50D525H1250" (layer "F.Cu") + (tstamp c8cfe034-72d1-41a5-9f6c-2a8b58c4cd4e) + (at 77.18 125.68 -90) + (descr "5*11") + (tags "Capacitor Polarised") + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Polarized capacitor") + (property "ki_keywords" "cap capacitor") + (path "/4af43834-c924-4e65-939c-9334e1de4766") + (attr through_hole) + (fp_text reference "C2" (at 4.880074 -0.6182) (layer "F.SilkS") + (effects (font (size 1.27 1.27) (thickness 0.254))) + (tstamp 82a06bbe-6f85-4009-a909-b329e94c0fb2) + ) + (fp_text value "47uF 35v" (at 0 0 90) (layer "F.SilkS") hide + (effects (font (size 1.27 1.27) (thickness 0.254))) + (tstamp 60c1f95e-29ae-4968-820b-c216c26f2b5c) + ) + (fp_circle (center 1 0) (end 1 2.625) + (stroke (width 0.2) (type solid)) (fill none) (layer "F.SilkS") (tstamp a013cb76-2687-462b-b75e-1d91f94c1fe4)) + (fp_circle (center 1 0) (end 1 2.625) + (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 077d1680-f903-4e77-9d5a-52100de2801a)) + (pad "1" thru_hole rect (at 0 0 270) (size 1.1 1.1) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 1 "Net-(D1-K)") (pintype "passive") (tstamp 1ea38779-7b99-4e3c-b48d-39ba0b2f0dab)) + (pad "2" thru_hole circle (at 2 0 270) (size 1.1 1.1) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 4 "GND") (pintype "passive") (tstamp 8ce33f08-44ac-4d15-acca-7b62eca58ef5)) + (model "UVZ1V470MDD1TA.stp" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Library:conn_holepad" (layer "F.Cu") + (tstamp cbc40c09-e30e-460a-bcc4-8171f797a030) + (at 89.88 69.8) + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Generic connector, single row, 01x01, script generated") + (property "ki_keywords" "connector") + (path "/dc9beee8-362a-431f-ae58-61cdcb6832dc") + (attr through_hole) + (fp_text reference "GND_A1" (at 0 -0.5 unlocked) (layer "F.SilkS") hide + (effects (font (size 1 1) (thickness 0.1))) + (tstamp 0947c915-f5c6-432f-bac1-be020a7c7bb5) + ) + (fp_text value "Conn_01x01_Pin" (at 0 1 unlocked) (layer "F.Fab") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp a5e5504f-2e7f-452d-96ef-037a92a4a23b) + ) + (pad "1" thru_hole circle (at 0 0) (size 3 3) (drill 1.5) (layers "*.Cu" "*.Mask") + (net 4 "GND") (pinfunction "Pin_1") (pintype "passive") (tstamp e567df10-68fb-4fdd-87c4-6b1de5057a6f)) + ) + + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") + (tstamp cc303b2f-da8c-4df0-8c75-83ec2aa6f6fc) + (at 56.86 120.6 -90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Resistor") + (property "ki_keywords" "R res resistor") + (path "/486efbe6-6d60-4f65-a28a-eac2f703a21a") + (attr through_hole) + (fp_text reference "R13" (at 2.950784 -2.43873) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 40383974-586f-488f-8d15-c01cebca7367) + ) + (fp_text value "2.2K" (at 1.27 1.92 90) (layer "F.Fab") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp c2c5b360-c807-4f30-9b32-b41bbee60ce9) + ) + (fp_line (start 0.92 0) (end 1.54 0) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 0c243eae-8e52-488e-a46c-947e4f00312f)) + (fp_circle (center 0 0) (end 0.92 0) + (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp c3db4bd4-0b60-4cb5-b000-4ad70d25d9d2)) + (fp_line (start -1.05 -1.05) (end -1.05 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 4200db4c-fcd2-48e8-977c-4ee8d4040212)) + (fp_line (start -1.05 1.05) (end 3.49 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp e81289d4-047f-4bc2-896f-9a6e0ff93552)) + (fp_line (start 3.49 -1.05) (end -1.05 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp e402de82-732e-43fe-94e4-3ec091ea86f6)) + (fp_line (start 3.49 1.05) (end 3.49 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp afbc005d-9813-4792-ae0f-efc02afcb9fb)) + (fp_line (start 0 0) (end 2.54 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 0609b196-f404-48f2-a5ed-1c23bbb9d89f)) + (fp_circle (center 0 0) (end 0.8 0) + (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp b8c28dfb-b198-482c-a03d-5187315aa79b)) + (pad "1" thru_hole circle (at 0 0 270) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 10 "Net-(D2-K)") (pintype "passive") (tstamp 430a3414-b187-4b96-962c-d5afbac9f47b)) + (pad "2" thru_hole oval (at 2.54 0 270) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 11 "Net-(C10-Pad1)") (pintype "passive") (tstamp 57635aef-4120-4aa4-87b9-0454e8f067e7)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Library:conn_holepad" (layer "F.Cu") + (tstamp d52543a2-d091-4b9c-b89b-c6f43a6f94a3) + (at 60.67 69.8) + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Generic connector, single row, 01x01, script generated") + (property "ki_keywords" "connector") + (path "/6e74e034-da91-4106-b8de-7f1079a017da") + (attr through_hole) + (fp_text reference "VCC_B2" (at 0 -0.5 unlocked) (layer "F.SilkS") hide + (effects (font (size 1 1) (thickness 0.1))) + (tstamp 999556b9-5a96-4aa2-8b56-6ff0dc5ca186) + ) + (fp_text value "Conn_01x01_Pin" (at 0 1 unlocked) (layer "F.Fab") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 6fce5574-8878-4437-a31a-399b7d6c31ad) + ) + (pad "1" thru_hole circle (at 0 0) (size 3 3) (drill 1.5) (layers "*.Cu" "*.Mask") + (net 16 "Net-(VCC_B2-Pin_1)") (pinfunction "Pin_1") (pintype "passive") (tstamp 1cbaaaae-3dbb-4e2b-86b8-dcce87cdf954)) + ) + + (footprint "Connector_Pin:Pin_D1.0mm_L10.0mm" (layer "F.Cu") + (tstamp d692ec11-ab6f-4974-8421-c0368dbf4bfd) + (at 87.34 107.9) + (descr "solder Pin_ diameter 1.0mm, hole diameter 1.0mm (press fit), length 10.0mm") + (tags "solder Pin_ press fit") + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Generic connector, single row, 01x01, script generated") + (property "ki_keywords" "connector") + (path "/7056a7e2-eebb-4df3-8f54-dadb45bfed44") + (attr through_hole) + (fp_text reference "VCC_A1" (at 0 2.54) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp bcc587bd-d6e7-4ee4-934b-57f69efee420) + ) + (fp_text value "Conn_01x01_Pin" (at 0 -2.05) (layer "F.Fab") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 76102052-38a6-4791-a45f-cc550315cc22) + ) + (fp_text user "${REFERENCE}" (at 0 2.54) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 1a183987-d28e-4930-9de2-f47cf58afc0a) + ) + (fp_circle (center 0 0) (end 1.25 0.05) + (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp 93f1e5e5-0c0e-4c7a-b73d-030d479f2f03)) + (fp_circle (center 0 0) (end 1.5 0) + (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd") (tstamp d14b7f59-ddf5-434e-a696-7056665ee85a)) + (fp_circle (center 0 0) (end 0.5 0) + (stroke (width 0.12) (type solid)) (fill none) (layer "F.Fab") (tstamp b9a14ece-9b3b-46a2-aa18-c9f98a17f8db)) + (fp_circle (center 0 0) (end 1 0) + (stroke (width 0.12) (type solid)) (fill none) (layer "F.Fab") (tstamp 2ea6bfbc-373f-49ce-87c4-76d0b945f499)) + (pad "1" thru_hole circle (at 0 0) (size 2 2) (drill 1) (layers "*.Cu" "*.Mask") + (net 1 "Net-(D1-K)") (pinfunction "Pin_1") (pintype "passive") (tstamp 34803306-11b2-4687-9250-7e4da9c0467d)) + (model "${KICAD6_3DMODEL_DIR}/Connector_Pin.3dshapes/Pin_D1.0mm_L10.0mm.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") + (tstamp d78725d9-47d7-4c83-be9b-4988d133a9b1) + (at 54.32 87.58 -90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Resistor") + (property "ki_keywords" "R res resistor") + (path "/8a64f8ab-cec7-4969-9401-c34ade5f0cb5") + (attr through_hole) + (fp_text reference "R17" (at 3.02605 -2.438207) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp b5b0ae33-50f6-4aa9-bad9-6288811ae392) + ) + (fp_text value "47K" (at 1.27 1.92 90) (layer "F.Fab") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 4c53eb70-ba9c-4268-9c7f-16a0f882d12c) + ) + (fp_line (start 0.92 0) (end 1.54 0) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 4b654bad-6c82-4e13-81eb-7690e7d65088)) + (fp_circle (center 0 0) (end 0.92 0) + (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp ecb0d627-3dd7-45ed-94b8-d110571a4102)) + (fp_line (start -1.05 -1.05) (end -1.05 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp a14ceb7e-9045-4f6b-a877-1bcdabbccfc3)) + (fp_line (start -1.05 1.05) (end 3.49 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 351a8d7b-5519-49b6-be48-159d30d68ba9)) + (fp_line (start 3.49 -1.05) (end -1.05 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp b2638917-4ba7-4f9a-ba60-7bbf29a08545)) + (fp_line (start 3.49 1.05) (end 3.49 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 027b16d4-ed89-4ecb-9d56-55b28958995a)) + (fp_line (start 0 0) (end 2.54 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 04b0efa9-7fa9-4091-806e-0feb46bcca8a)) + (fp_circle (center 0 0) (end 0.8 0) + (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 247a97aa-db32-42a5-9497-b9292b6b560c)) + (pad "1" thru_hole circle (at 0 0 270) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 15 "Net-(C12-Pad1)") (pintype "passive") (tstamp b7485c42-0a31-4c6d-b2c9-9bf54242cc73)) + (pad "2" thru_hole oval (at 2.54 0 270) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 4 "GND") (pintype "passive") (tstamp c5b5e88b-0bde-42ff-bc86-61422ecab011)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "C47u63v:CAPPRD350W65D800H1250" (layer "F.Cu") + (tstamp d9eee99c-ac07-4010-90bf-79bd31a2f61a) + (at 77.18 146) + (descr "EEU-EB1J470SJ-1") + (tags "Capacitor Polarised") + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Polarized capacitor") + (property "ki_keywords" "cap capacitor") + (path "/b794b8cc-7dca-48f0-a5b9-9fe56f5cb9c1") + (attr through_hole) + (fp_text reference "C3" (at 1.91582 2.211304) (layer "F.SilkS") + (effects (font (size 1.27 1.27) (thickness 0.254))) + (tstamp 68af9610-47d8-4b28-b278-6835e9f14d62) + ) + (fp_text value "47uF 63v" (at 0 0) (layer "F.SilkS") hide + (effects (font (size 1.27 1.27) (thickness 0.254))) + (tstamp 797c0ff2-1abe-4cef-bea8-2fdb46466297) + ) + (fp_circle (center 1.75 0) (end 1.75 4) + (stroke (width 0.2) (type solid)) (fill none) (layer "F.SilkS") (tstamp f1b0b285-09c1-4cac-8dfb-1ae231a7707b)) + (fp_circle (center 1.75 0) (end 1.75 4) + (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp fcaa04ce-8c24-4122-bb76-2277c48bccb8)) + (pad "1" thru_hole rect (at 0 0) (size 1.275 1.275) (drill 0.85) (layers "*.Cu" "*.Mask") + (net 3 "Net-(C3-Pad1)") (pintype "passive") (tstamp 21675859-af13-49a5-a89a-4474ecd9d726)) + (pad "2" thru_hole circle (at 3.5 0) (size 1.275 1.275) (drill 0.85) (layers "*.Cu" "*.Mask") + (net 5 "Net-(C3-Pad2)") (pintype "passive") (tstamp a8594eb3-c6a5-4d87-9514-85efd0312e03)) + (model "EEU-EB1J470SJ.stp" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (layer "F.Cu") + (tstamp ddaadb9e-34f4-4d27-b880-e32c97542663) + (at 82.26 120.6 -90) + (descr "Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf") + (tags "Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm") + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Resistor") + (property "ki_keywords" "R res resistor") + (path "/831a82f3-bee1-4a20-9f0c-de8891a80b24") + (attr through_hole) + (fp_text reference "R4" (at 2.990888 -1.947178 -180) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 43cbdaf2-5dad-4be4-9de3-4d78d516d7ab) + ) + (fp_text value "2.2K" (at 1.27 1.92 90) (layer "F.Fab") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 832d4942-107e-4326-b3fb-18baf1123f02) + ) + (fp_line (start 0.92 0) (end 1.54 0) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 5de920bc-4e4d-4053-9613-313706e2500e)) + (fp_circle (center 0 0) (end 0.92 0) + (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp fd69e8ad-e9cf-4107-bfbb-ec8585d1b82d)) + (fp_line (start -1.05 -1.05) (end -1.05 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp c07d5f7c-5786-4121-9594-1fc82a628b7f)) + (fp_line (start -1.05 1.05) (end 3.49 1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 554f7d26-3640-4294-a434-eabcfd4bc15f)) + (fp_line (start 3.49 -1.05) (end -1.05 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp f7ad05db-2f1b-46fa-8b4b-5d2a50ac6c8f)) + (fp_line (start 3.49 1.05) (end 3.49 -1.05) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 1024eda9-edb0-4304-b86a-f738438a6539)) + (fp_line (start 0 0) (end 2.54 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 76286cb1-2984-4886-ad44-69a694c5d13f)) + (fp_circle (center 0 0) (end 0.8 0) + (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 173aec12-1541-4d22-b2dc-2ce2e22a79aa)) + (pad "1" thru_hole circle (at 0 0 270) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 1 "Net-(D1-K)") (pintype "passive") (tstamp a2f44d4a-752d-4b68-aa02-fc3a04b207fa)) + (pad "2" thru_hole oval (at 2.54 0 270) (size 1.4 1.4) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 6 "Net-(C4-Pad1)") (pintype "passive") (tstamp fdc90a4c-2006-4549-be27-2a173bff3e6b)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_THT.3dshapes/R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Connector_Pin:Pin_D1.0mm_L10.0mm" (layer "F.Cu") + (tstamp eb2b727b-6c46-4603-9390-f7a52a6f2750) + (at 56.86 107.9) + (descr "solder Pin_ diameter 1.0mm, hole diameter 1.0mm (press fit), length 10.0mm") + (tags "solder Pin_ press fit") + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Generic connector, single row, 01x01, script generated") + (property "ki_keywords" "connector") + (path "/6778b725-cc7e-4fa7-8d8b-1f47e2db759c") + (attr through_hole) + (fp_text reference "VCC_B1" (at 0 2.25) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 0fcbc334-e9b5-4b03-9f5f-48d04892b842) + ) + (fp_text value "Conn_01x01_Pin" (at 0 -2.05) (layer "F.Fab") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp d693ee10-12f0-40b1-acd0-b1f4f6a0d677) + ) + (fp_text user "${REFERENCE}" (at 0 2.25) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 705ee86f-7b1f-4c78-b3e6-e12f18a1ff44) + ) + (fp_circle (center 0 0) (end 1.25 0.05) + (stroke (width 0.12) (type solid)) (fill none) (layer "F.SilkS") (tstamp 87fce251-3f66-46ee-9c2b-640083f0e3ef)) + (fp_circle (center 0 0) (end 1.5 0) + (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd") (tstamp a93f1705-a556-4ce2-9fb9-5840e70a3de0)) + (fp_circle (center 0 0) (end 0.5 0) + (stroke (width 0.12) (type solid)) (fill none) (layer "F.Fab") (tstamp 691e2d80-b959-4c7c-958d-8041b1a0f5f9)) + (fp_circle (center 0 0) (end 1 0) + (stroke (width 0.12) (type solid)) (fill none) (layer "F.Fab") (tstamp ccdcab9c-1148-4b7c-a5cc-08cbddc04d08)) + (pad "1" thru_hole circle (at 0 0) (size 2 2) (drill 1) (layers "*.Cu" "*.Mask") + (net 10 "Net-(D2-K)") (pinfunction "Pin_1") (pintype "passive") (tstamp 30eff844-c514-488d-a74f-a90181e31452)) + (model "${KICAD6_3DMODEL_DIR}/Connector_Pin.3dshapes/Pin_D1.0mm_L10.0mm.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "C47u35v:CAPPRD200W50D525H1250" (layer "F.Cu") + (tstamp ee1741f5-8fe9-4aef-8cfa-1bdaf9b0d7f6) + (at 67.02 118.06 -90) + (descr "5*11") + (tags "Capacitor Polarised") + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Polarized capacitor") + (property "ki_keywords" "cap capacitor") + (path "/028b1213-6965-4c6b-88c6-99867053371d") + (attr through_hole) + (fp_text reference "C14" (at 4.811353 -1.175692) (layer "F.SilkS") + (effects (font (size 1.27 1.27) (thickness 0.254))) + (tstamp 75c77906-4dc5-4d49-9c15-83f3025923e3) + ) + (fp_text value "47uF 35v" (at 0 0 90) (layer "F.SilkS") hide + (effects (font (size 1.27 1.27) (thickness 0.254))) + (tstamp 5bda1c20-1d50-4b9b-ab0c-0b8357e40a88) + ) + (fp_circle (center 1 0) (end 1 2.625) + (stroke (width 0.2) (type solid)) (fill none) (layer "F.SilkS") (tstamp bc54e2fa-61af-42de-9f4f-d4840899512c)) + (fp_circle (center 1 0) (end 1 2.625) + (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 999edf3e-b089-400a-bdea-5554c000e468)) + (pad "1" thru_hole rect (at 0 0 270) (size 1.1 1.1) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 16 "Net-(VCC_B2-Pin_1)") (pintype "passive") (tstamp b6101f82-1379-437b-9a34-da0e4f4c85ec)) + (pad "2" thru_hole circle (at 2 0 270) (size 1.1 1.1) (drill 0.7) (layers "*.Cu" "*.Mask") + (net 2 "Earth") (pintype "passive") (tstamp 88bfbde4-b27a-497d-9b8a-37ad5bce6032)) + (model "UVZ1V470MDD1TA.stp" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Library:conn_holepad" (layer "F.Cu") + (tstamp f4e09da5-de11-4910-938f-ad22f422a378) + (at 77.18 156.16) + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Generic connector, single row, 01x01, script generated") + (property "ki_keywords" "connector") + (path "/02603ffc-8ef0-4551-98e5-69f3d0b5f5ed") + (attr through_hole) + (fp_text reference "X2A1" (at -0.002784 2.539356 unlocked) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.1))) + (tstamp d5f4a471-ed9d-4edc-bb23-bc08bbf7bf32) + ) + (fp_text value "Conn_01x01_Pin" (at 0 1 unlocked) (layer "F.Fab") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 7b9076ea-7a3b-44da-9637-c3c60712ac36) + ) + (fp_text user "${REFERENCE}" (at 0 2.5 unlocked) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 1306ac26-2168-4d74-b747-b714a328742e) + ) + (pad "1" thru_hole circle (at 0 0) (size 3 3) (drill 1.5) (layers "*.Cu" "*.Mask") + (net 24 "Net-(X2A1-Pin_1)") (pinfunction "Pin_1") (pintype "passive") (tstamp 1b13fdac-fbab-47a5-83c7-5c17e6ca715a)) + ) + + (footprint "opa1642:SOIC127P600X175-8N" (layer "B.Cu") + (tstamp 3df34ff6-6920-43a3-9389-a99a8a5a4bd9) + (at 67.02 90.12 -90) + (descr "D0008A") + (tags "Integrated Circuit") + (property "Availability" "In Stock") + (property "Check_prices" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=eda") + (property "Description" "\n \n Dual SoundPlus™ high-performance, JFET-input audio op amp\n \n") + (property "MANUFACTURER" "Texas Instruments") + (property "MAXIMUM_PACKAGE_HEIGHT" "1.75 mm") + (property "MF" "Texas Instruments") + (property "MP" "OPA1642AID") + (property "PARTREV" "D") + (property "Package" "SOIC-8 Texas Instruments") + (property "Price" "None") + (property "STANDARD" "IPC 7351B") + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "SnapEDA_Link" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=snap") + (path "/e46d3b5f-0bed-4df1-a7ff-7fb3e0496ac5") + (attr smd) + (fp_text reference "IC2" (at 0 0 90) (layer "B.SilkS") + (effects (font (size 1.27 1.27) (thickness 0.254)) (justify mirror)) + (tstamp 7ab03f5b-4dbe-4043-9c09-ca81c971378b) + ) + (fp_text value "OPA1642AID" (at 0 0 90) (layer "B.SilkS") hide + (effects (font (size 1.27 1.27) (thickness 0.254)) (justify mirror)) + (tstamp 21191121-0451-4bc0-8c43-6a118ab7be55) + ) + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "B.Fab") + (effects (font (size 1.27 1.27) (thickness 0.254)) (justify mirror)) + (tstamp 67213649-116b-44b4-a016-908d30e19bf3) + ) + (fp_line (start -3.475 2.58) (end -1.948 2.58) + (stroke (width 0.2) (type solid)) (layer "B.SilkS") (tstamp 4ba2e218-d66f-433a-99ce-c0aba8017f15)) + (fp_line (start -1.598 -2.452) (end -1.598 2.452) + (stroke (width 0.2) (type solid)) (layer "B.SilkS") (tstamp bcdd0f5b-e8fd-4242-a11c-667ec30e092a)) + (fp_line (start -1.598 2.452) (end 1.598 2.452) + (stroke (width 0.2) (type solid)) (layer "B.SilkS") (tstamp 131d93cb-5ed0-47be-bfc4-cc8c8360c030)) + (fp_line (start 1.598 -2.452) (end -1.598 -2.452) + (stroke (width 0.2) (type solid)) (layer "B.SilkS") (tstamp dbf2a3aa-479b-49e0-9ed3-b6d343f94a44)) + (fp_line (start 1.598 2.452) (end 1.598 -2.452) + (stroke (width 0.2) (type solid)) (layer "B.SilkS") (tstamp 29a50c34-9072-49c7-a0a0-9c192fb183ab)) + (fp_line (start -3.725 -2.75) (end -3.725 2.75) + (stroke (width 0.05) (type solid)) (layer "B.CrtYd") (tstamp 33d63245-0b86-4679-846f-9f2d45d02764)) + (fp_line (start -3.725 2.75) (end 3.725 2.75) + (stroke (width 0.05) (type solid)) (layer "B.CrtYd") (tstamp e3a830bd-70bf-43fa-8411-57307f60abfe)) + (fp_line (start 3.725 -2.75) (end -3.725 -2.75) + (stroke (width 0.05) (type solid)) (layer "B.CrtYd") (tstamp 5a89c354-5527-4ee0-ba60-77c7881cd971)) + (fp_line (start 3.725 2.75) (end 3.725 -2.75) + (stroke (width 0.05) (type solid)) (layer "B.CrtYd") (tstamp 257f17a2-9701-4be4-9f56-f6d7fa9d7e23)) + (fp_line (start -1.948 -2.452) (end -1.948 2.452) + (stroke (width 0.1) (type solid)) (layer "B.Fab") (tstamp c3bf4815-2da1-412e-98a1-e0d962eeab47)) + (fp_line (start -1.948 1.182) (end -0.678 2.452) + (stroke (width 0.1) (type solid)) (layer "B.Fab") (tstamp d5548735-46c8-45d4-83d2-7300ccccc86a)) + (fp_line (start -1.948 2.452) (end 1.948 2.452) + (stroke (width 0.1) (type solid)) (layer "B.Fab") (tstamp 57abdd58-59f1-4a90-8ba3-166964f27bb7)) + (fp_line (start 1.948 -2.452) (end -1.948 -2.452) + (stroke (width 0.1) (type solid)) (layer "B.Fab") (tstamp cf79f700-d51a-4ec9-b719-038b079e3b22)) + (fp_line (start 1.948 2.452) (end 1.948 -2.452) + (stroke (width 0.1) (type solid)) (layer "B.Fab") (tstamp 662b0489-51c6-4ec4-b6cf-76b8bd6b6370)) + (pad "1" smd rect (at -2.711 1.905 180) (size 0.65 1.528) (layers "B.Cu" "B.Paste" "B.Mask") + (net 14 "Net-(C11-Pad2)") (pintype "output") (tstamp 2fbfacf1-4eb5-40c6-bb8b-0f91dcc18e05)) + (pad "2" smd rect (at -2.711 0.635 180) (size 0.65 1.528) (layers "B.Cu" "B.Paste" "B.Mask") + (net 20 "Net-(SGNL_B1-Pin_1)") (pintype "input") (tstamp 778b80fd-e950-42d3-8fac-7497a66155cd)) + (pad "3" smd rect (at -2.711 -0.635 180) (size 0.65 1.528) (layers "B.Cu" "B.Paste" "B.Mask") + (net 21 "Net-(IC2-Pad3)") (pintype "input") (tstamp b6284a84-3a51-44fb-a8b8-477ad4f72f15)) + (pad "4" smd rect (at -2.711 -1.905 180) (size 0.65 1.528) (layers "B.Cu" "B.Paste" "B.Mask") + (net 4 "GND") (pintype "power_in") (tstamp 5404bce7-efa6-4418-852d-fa6f13572326)) + (pad "5" smd rect (at 2.711 -1.905 180) (size 0.65 1.528) (layers "B.Cu" "B.Paste" "B.Mask") + (net 15 "Net-(C12-Pad1)") (pintype "input") (tstamp 1ce196e2-76b3-456b-89af-f5c8710a9ca6)) + (pad "6" smd rect (at 2.711 -0.635 180) (size 0.65 1.528) (layers "B.Cu" "B.Paste" "B.Mask") + (net 22 "Net-(IC2-Pad6)") (pintype "input") (tstamp 3f001d35-b3f1-4d1c-bff8-c4562d7faed2)) + (pad "7" smd rect (at 2.711 0.635 180) (size 0.65 1.528) (layers "B.Cu" "B.Paste" "B.Mask") + (net 12 "Net-(C10-Pad2)") (pintype "output") (tstamp a4088c01-4b23-4e86-ad63-95bdb41b011c)) + (pad "8" smd rect (at 2.711 1.905 180) (size 0.65 1.528) (layers "B.Cu" "B.Paste" "B.Mask") + (net 16 "Net-(VCC_B2-Pin_1)") (pintype "power_in") (tstamp cdda338b-07c9-42fb-acce-81d9ace24aff)) + (model "OPA1642AID.stp" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "opa1642:SOIC127P600X175-8N" (layer "B.Cu") + (tstamp 7cf4c0a4-a134-4e2d-a9f4-d4f0335ad8a0) + (at 77.18 90.12 -90) + (descr "D0008A") + (tags "Integrated Circuit") + (property "Availability" "In Stock") + (property "Check_prices" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=eda") + (property "Description" "\n \n Dual SoundPlus™ high-performance, JFET-input audio op amp\n \n") + (property "MANUFACTURER" "Texas Instruments") + (property "MAXIMUM_PACKAGE_HEIGHT" "1.75 mm") + (property "MF" "Texas Instruments") + (property "MP" "OPA1642AID") + (property "PARTREV" "D") + (property "Package" "SOIC-8 Texas Instruments") + (property "Price" "None") + (property "STANDARD" "IPC 7351B") + (property "Sheetfile" "retro.kicad_sch") + (property "Sheetname" "") + (property "SnapEDA_Link" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=snap") + (path "/adb405c9-094f-4a77-a219-d4048679141c") + (attr smd) + (fp_text reference "IC1" (at 0 0 90) (layer "B.SilkS") + (effects (font (size 1.27 1.27) (thickness 0.254)) (justify mirror)) + (tstamp 48fcb5a8-de4a-49ed-9c39-0a45edaf5644) + ) + (fp_text value "OPA1642AID" (at 0 0 90) (layer "B.SilkS") hide + (effects (font (size 1.27 1.27) (thickness 0.254)) (justify mirror)) + (tstamp e980c6f1-3dd5-41e4-aff4-881a7810fd3b) + ) + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "B.Fab") + (effects (font (size 1.27 1.27) (thickness 0.254)) (justify mirror)) + (tstamp d46ea488-78be-483c-9644-e4f51b81e21d) + ) + (fp_line (start -3.475 2.58) (end -1.948 2.58) + (stroke (width 0.2) (type solid)) (layer "B.SilkS") (tstamp 4987cd9b-409e-4639-95b2-7988f6efac41)) + (fp_line (start -1.598 -2.452) (end -1.598 2.452) + (stroke (width 0.2) (type solid)) (layer "B.SilkS") (tstamp 077c0592-6626-4af3-842c-207009d40bb7)) + (fp_line (start -1.598 2.452) (end 1.598 2.452) + (stroke (width 0.2) (type solid)) (layer "B.SilkS") (tstamp e1d8020f-32ec-488c-8482-4347981fbbf2)) + (fp_line (start 1.598 -2.452) (end -1.598 -2.452) + (stroke (width 0.2) (type solid)) (layer "B.SilkS") (tstamp 7dd04dc5-0d6d-4f9c-8c6b-ab7bb6b47523)) + (fp_line (start 1.598 2.452) (end 1.598 -2.452) + (stroke (width 0.2) (type solid)) (layer "B.SilkS") (tstamp f18e4cd9-d7e6-46b3-ac9f-9c7ce5d20559)) + (fp_line (start -3.725 -2.75) (end -3.725 2.75) + (stroke (width 0.05) (type solid)) (layer "B.CrtYd") (tstamp 4266a81e-f548-41f9-8523-14e6db9e1724)) + (fp_line (start -3.725 2.75) (end 3.725 2.75) + (stroke (width 0.05) (type solid)) (layer "B.CrtYd") (tstamp ab2f59ea-310d-4b7f-8328-3c4a915d4b49)) + (fp_line (start 3.725 -2.75) (end -3.725 -2.75) + (stroke (width 0.05) (type solid)) (layer "B.CrtYd") (tstamp abd35881-88a4-4be3-a67e-31363880025e)) + (fp_line (start 3.725 2.75) (end 3.725 -2.75) + (stroke (width 0.05) (type solid)) (layer "B.CrtYd") (tstamp 8a69ea1e-3605-442c-873c-c3877c9e2571)) + (fp_line (start -1.948 -2.452) (end -1.948 2.452) + (stroke (width 0.1) (type solid)) (layer "B.Fab") (tstamp f9dc7044-1345-4c74-8392-92bcdaf4f525)) + (fp_line (start -1.948 1.182) (end -0.678 2.452) + (stroke (width 0.1) (type solid)) (layer "B.Fab") (tstamp 5b15ff4f-b94b-4329-93a6-97c742c07889)) + (fp_line (start -1.948 2.452) (end 1.948 2.452) + (stroke (width 0.1) (type solid)) (layer "B.Fab") (tstamp 2333be59-73ae-483a-9836-ef610aaddd14)) + (fp_line (start 1.948 -2.452) (end -1.948 -2.452) + (stroke (width 0.1) (type solid)) (layer "B.Fab") (tstamp 6f8697fd-e0da-45e5-a0bb-6a6308141d72)) + (fp_line (start 1.948 2.452) (end 1.948 -2.452) + (stroke (width 0.1) (type solid)) (layer "B.Fab") (tstamp f3a72be3-480c-48cb-86f1-9b74814ffaae)) + (pad "1" smd rect (at -2.711 1.905 180) (size 0.65 1.528) (layers "B.Cu" "B.Paste" "B.Mask") + (net 7 "Net-(C4-Pad2)") (pintype "output") (tstamp de8d7992-cea7-4454-bef2-0ae393fe4429)) + (pad "2" smd rect (at -2.711 0.635 180) (size 0.65 1.528) (layers "B.Cu" "B.Paste" "B.Mask") + (net 17 "Net-(SGNL_A1-Pin_1)") (pintype "input") (tstamp 97fbe7d0-32c8-47ef-85ae-e696bcb0104b)) + (pad "3" smd rect (at -2.711 -0.635 180) (size 0.65 1.528) (layers "B.Cu" "B.Paste" "B.Mask") + (net 18 "Net-(IC1-Pad3)") (pintype "input") (tstamp 82632c34-11fe-46c8-91a9-46ac8f926739)) + (pad "4" smd rect (at -2.711 -1.905 180) (size 0.65 1.528) (layers "B.Cu" "B.Paste" "B.Mask") + (net 4 "GND") (pintype "power_in") (tstamp 2fbbe455-206b-4f3b-8542-5880a65d816a)) + (pad "5" smd rect (at 2.711 -1.905 180) (size 0.65 1.528) (layers "B.Cu" "B.Paste" "B.Mask") + (net 8 "Net-(C5-Pad1)") (pintype "input") (tstamp d4532c89-058b-49c5-ac06-59239cb28bbf)) + (pad "6" smd rect (at 2.711 -0.635 180) (size 0.65 1.528) (layers "B.Cu" "B.Paste" "B.Mask") + (net 19 "Net-(IC1-Pad6)") (pintype "input") (tstamp 6faf1d0f-8776-42a8-b7bb-c08c8260601f)) + (pad "7" smd rect (at 2.711 0.635 180) (size 0.65 1.528) (layers "B.Cu" "B.Paste" "B.Mask") + (net 5 "Net-(C3-Pad2)") (pintype "output") (tstamp e52b3a68-d4f8-4520-b5fa-c78e4d4231ae)) + (pad "8" smd rect (at 2.711 1.905 180) (size 0.65 1.528) (layers "B.Cu" "B.Paste" "B.Mask") + (net 9 "Net-(VCC_A2-Pin_1)") (pintype "power_in") (tstamp 4acc962d-aee4-4b2e-925c-89282e018113)) + (model "OPA1642AID.stp" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (gr_circle (center 86.495385 77.591) (end 84.22977 77.629116) + (stroke (width 0.15) (type default)) (fill none) (layer "F.SilkS") (tstamp 74ba7f71-dc4b-4851-9c33-6c55ed8714ba)) + (gr_circle (center 57.495 77.591) (end 55.241385 77.629116) + (stroke (width 0.15) (type default)) (fill none) (layer "F.SilkS") (tstamp d78a8605-0faa-45b0-a883-fb5ba757e10d)) + (gr_line (start 55.015769 156.333) (end 54.923769 156.333) + (stroke (width 0.1) (type default)) (layer "Edge.Cuts") (tstamp 00c33ccb-8250-48c5-86b2-2bf2450fe837)) + (gr_line (start 52.432248 64.815468) (end 91.578521 64.817237) + (stroke (width 0.1) (type default)) (layer "Edge.Cuts") (tstamp 33d19db6-c008-49ec-97b4-4d648cf0e5a2)) + (gr_arc (start 91.578521 64.817237) (mid 92.481003 65.191089) (end 92.854855 66.093571) + (stroke (width 0.1) (type default)) (layer "Edge.Cuts") (tstamp 455ddf0d-7497-49f4-92c2-28e3811e4ba9)) + (gr_line (start 57.972 159.289231) (end 86.038769 159.291) + (stroke (width 0.1) (type default)) (layer "Edge.Cuts") (tstamp 492a0e52-3505-4eff-b233-23a6f27b5c18)) + (gr_line (start 88.995 156.334769) (end 89.087 156.334769) + (stroke (width 0.1) (type default)) (layer "Edge.Cuts") (tstamp 7ddecae6-4c4b-42b0-bab0-5e26d93e32e6)) + (gr_arc (start 51.155914 66.091802) (mid 51.529759 65.189328) (end 52.432248 64.815468) + (stroke (width 0.1) (type default)) (layer "Edge.Cuts") (tstamp 88ecc551-e657-45ea-9528-c0f9a0a6a25d)) + (gr_arc (start 55.015769 156.333) (mid 57.106138 157.198853) (end 57.972 159.289231) + (stroke (width 0.1) (type default)) (layer "Edge.Cuts") (tstamp bec32d07-79ec-4cb1-a483-8aabd22cc57b)) + (gr_line (start 51.155914 66.091802) (end 54.923769 156.333) + (stroke (width 0.1) (type default)) (layer "Edge.Cuts") (tstamp c840ab66-863d-4edf-8993-ecb9072a5357)) + (gr_arc (start 86.038769 159.291) (mid 86.904653 157.200674) (end 88.995 156.334769) + (stroke (width 0.1) (type default)) (layer "Edge.Cuts") (tstamp cede8dad-cd64-44e3-9657-2ee8823340ac)) + (gr_line (start 92.854855 66.093571) (end 89.087 156.334769) + (stroke (width 0.1) (type default)) (layer "Edge.Cuts") (tstamp f2ed6753-d7ba-4ccc-ab01-db834b2589fd)) + (gr_text "XLR" (at 69.789193 153.371392) (layer "F.Cu" knockout) (tstamp 367109ff-45e2-4dd4-a867-67d045227ac0) + (effects (font (size 1.5 1.5) (thickness 0.3) bold italic) (justify left bottom)) + ) + (gr_text "senke 2025" (at 90.063107 105.686999 90) (layer "F.Cu" knockout) (tstamp 81178e4f-6204-475d-9d9f-29553ce9a21b) + (effects (font (size 1 1) (thickness 0.25) bold) (justify left bottom)) + ) + (gr_text "talas.fr" (at 88.216471 105.351247 90) (layer "F.Cu" knockout) (tstamp d09b2539-7373-4473-a5f0-c8459ea8232d) + (effects (font (size 1.5 1.5) (thickness 0.3) bold) (justify left bottom)) + ) + (gr_text "capsule" (at 67.482734 67.292707) (layer "F.Cu" knockout) (tstamp f3c31054-420d-4d95-8d93-ef87df79b9ce) + (effects (font (size 1.5 1.5) (thickness 0.3) bold italic) (justify left bottom)) + ) + (gr_text "GND_A1" (at 89.781358 72.707931) (layer "F.SilkS") (tstamp 13144784-7da2-4b4e-8378-dfc12272a967) + (effects (font (size 1 1) (thickness 0.15))) + ) + (gr_text "VCC_B2" (at 60.571358 72.707931) (layer "F.SilkS") (tstamp 45eb5003-35fc-42b1-b550-d82b87dc2308) + (effects (font (size 1 1) (thickness 0.15))) + ) + (gr_text "SGNL_B1" (at 66.921358 72.707931) (layer "F.SilkS") (tstamp 7199f138-4675-4532-802c-8a270467b896) + (effects (font (size 1 1) (thickness 0.15))) + ) + (gr_text "GND_B1" (at 54.221358 72.707931) (layer "F.SilkS") (tstamp 8e34020d-ee90-4bea-acee-401facaca816) + (effects (font (size 1 1) (thickness 0.15))) + ) + (gr_text "SGNL_A1" (at 77.081358 72.707931) (layer "F.SilkS") (tstamp ca1ce028-c4b6-4e6d-8613-a3acf2c1d838) + (effects (font (size 1 1) (thickness 0.15))) + ) + (gr_text "VCC_A2" (at 83.431358 72.707931) (layer "F.SilkS") (tstamp e096f130-20bb-4a15-b169-12682ad3daa8) + (effects (font (size 1 1) (thickness 0.15))) + ) + (gr_text "SGNL_A1" (at 77.081358 72.707931) (layer "F.Fab") (tstamp 77aab8de-1485-43a0-8253-6813f49783a1) + (effects (font (size 1 1) (thickness 0.15))) + ) + (gr_text "VCC_B2" (at 60.571358 72.707931) (layer "F.Fab") (tstamp 7d8d8aa4-9316-4eb8-8e65-366793df64c3) + (effects (font (size 1 1) (thickness 0.15))) + ) + (gr_text "VCC_A2" (at 83.431358 72.707931) (layer "F.Fab") (tstamp a362efc1-93b0-498c-a9b5-5ad8e9dde368) + (effects (font (size 1 1) (thickness 0.15))) + ) + (gr_text "GND_A1" (at 89.781358 72.707931) (layer "F.Fab") (tstamp da20e25f-bcc9-4b72-9cae-1c851ad01816) + (effects (font (size 1 1) (thickness 0.15))) + ) + (gr_text "SGNL_B1" (at 66.921358 72.707931) (layer "F.Fab") (tstamp f5fd0f85-7d20-48ef-9e08-f1615af2a5b0) + (effects (font (size 1 1) (thickness 0.15))) + ) + (gr_text "GND_B1" (at 54.221358 72.707931) (layer "F.Fab") (tstamp f822b50d-810f-4469-a3b4-13f7ecdb3896) + (effects (font (size 1 1) (thickness 0.15))) + ) + + (segment (start 82.26 108.927) (end 81.2013 109.986) (width 0.25) (layer "F.Cu") (net 1) (tstamp 033ed2bb-8469-4304-85c0-bf1822acd097)) + (segment (start 87.34 115.52) (end 87.34 120.6) (width 0.25) (layer "F.Cu") (net 1) (tstamp 5b7910c5-b356-43cf-93e4-9129027fce53)) + (segment (start 81.2013 114.461) (end 82.26 115.52) (width 0.25) (layer "F.Cu") (net 1) (tstamp 6ceba954-2229-49e6-955d-305504d99db7)) + (segment (start 82.26 120.6) (end 82.26 115.52) (width 0.25) (layer "F.Cu") (net 1) (tstamp 8f976c81-d877-4384-a08c-3ca17cafc9a7)) + (segment (start 81.2013 109.986) (end 81.2013 114.461) (width 0.25) (layer "F.Cu") (net 1) (tstamp 947eee9b-2039-4bfc-96c8-2b3f72776459)) + (segment (start 82.26 107.9) (end 82.26 108.927) (width 0.25) (layer "F.Cu") (net 1) (tstamp f0123df6-f5c1-44e7-b1b5-db88687f71b8)) + (segment (start 78.0569 124.803) (end 82.26 120.6) (width 0.25) (layer "B.Cu") (net 1) (tstamp 0f933596-8e11-4139-b28f-3d53e2b65e8f)) + (segment (start 77.18 125.68) (end 77.18 124.803) (width 0.25) (layer "B.Cu") (net 1) (tstamp 43b6479b-b5e7-4c93-a126-9d36bedc1575)) + (segment (start 77.18 124.803) (end 78.0569 124.803) (width 0.25) (layer "B.Cu") (net 1) (tstamp 468ff319-7061-4497-9d76-148f0a46bce9)) + (segment (start 87.34 115.52) (end 82.26 115.52) (width 0.25) (layer "B.Cu") (net 1) (tstamp e8ed593d-4fde-4ca5-973b-825aa6c34f02)) + (segment (start 82.26 107.9) (end 87.34 107.9) (width 0.25) (layer "B.Cu") (net 1) (tstamp f2e1bcf5-7192-4f9b-84ac-cab1a56402ee)) + (segment (start 64.0947 113.62) (end 64.0947 117.135) (width 0.25) (layer "F.Cu") (net 2) (tstamp 011514d0-e73c-4507-8bee-ecb4698c5cf8)) + (segment (start 58.3134 107.839) (end 64.0947 113.62) (width 0.25) (layer "F.Cu") (net 2) (tstamp 18621ccc-97d1-422b-a191-1af0d6a3d70c)) + (segment (start 64.0947 117.135) (end 67.02 120.06) (width 0.25) (layer "F.Cu") (net 2) (tstamp 27ab4cda-0b13-471f-9f30-93674f24404f)) + (segment (start 59.4 87.58) (end 59.4 88.6069) (width 0.25) (layer "F.Cu") (net 2) (tstamp 3bd23884-6659-4488-9734-e307f95f4561)) + (segment (start 59.4 88.6069) (end 58.3134 89.6935) (width 0.25) (layer "F.Cu") (net 2) (tstamp 3ca0f2c6-e7ac-4621-9547-60df783c3c76)) + (segment (start 58.3134 89.6935) (end 58.3134 107.839) (width 0.25) (layer "F.Cu") (net 2) (tstamp f26086f4-295c-444a-b07e-f5b1beeede6b)) + (segment (start 67.02 120.06) (end 77.18 120.06) (width 0.25) (layer "B.Cu") (net 2) (tstamp 08323eb8-51d0-445e-876a-d6a559a18f87)) + (segment (start 82.3471 90.0729) (end 84.8 87.62) (width 0.25) (layer "B.Cu") (net 2) (tstamp 39477db4-ebc9-4055-8bdf-e52fb8d0bda8)) + (segment (start 62.9198 90.0729) (end 82.3471 90.0729) (width 0.25) (layer "B.Cu") (net 2) (tstamp 62811476-ee45-4e1f-b41b-4f7210083eb8)) + (segment (start 59.4 87.58) (end 60.4269 87.58) (width 0.25) (layer "B.Cu") (net 2) (tstamp 7e5dc6c4-f876-4f74-b4c1-a48b6f4862b1)) + (segment (start 60.4269 87.58) (end 62.9198 90.0729) (width 0.25) (layer "B.Cu") (net 2) (tstamp fed4ad18-75fd-4576-b8e0-3843781eaf50)) + (segment (start 87.34 123.14) (end 87.34 128.22) (width 0.25) (layer "F.Cu") (net 3) (tstamp 5f1b3636-cc0a-4b84-b10d-87032e3c549a)) + (segment (start 77.18 145.036) (end 85.8254 136.39) (width 0.25) (layer "B.Cu") (net 3) (tstamp 3de93b22-4b07-4749-9b80-faadfb0dfe41)) + (segment (start 85.8254 136.39) (end 85.8254 129.735) (width 0.25) (layer "B.Cu") (net 3) (tstamp 611ec917-5917-421b-a96c-cdce32b8428f)) + (segment (start 85.8254 129.735) (end 87.34 128.22) (width 0.25) (layer "B.Cu") (net 3) (tstamp 6acbe092-0b0d-48bc-84b6-882d58d868b0)) + (segment (start 77.18 146) (end 77.18 145.036) (width 0.25) (layer "B.Cu") (net 3) (tstamp 737fa8f5-9acd-46ae-89c3-8976c3b7cd30)) + (segment (start 78.0569 126.803) (end 78.0569 111.317) (width 0.25) (layer "F.Cu") (net 4) (tstamp 209b7696-56e1-4224-af84-7fd6d1d04f56)) + (segment (start 72.1 132.76) (end 72.1 156.16) (width 0.25) (layer "F.Cu") (net 4) (tstamp 4a57c764-e240-44fe-9e4a-a44909338814)) + (segment (start 69.02 88.8035) (end 68.3582 88.1417) (width 0.25) (layer "F.Cu") (net 4) (tstamp 7f104a8c-b8eb-4e6a-9943-e9e99c85e889)) + (segment (start 54.32 90.12) (end 52.69 88.49) (width 0.25) (layer "F.Cu") (net 4) (tstamp 8a063b81-c04a-45fa-a1d0-37a4b91aa557)) + (segment (start 68.3582 88.1417) (end 64.239487 88.1417) (width 0.25) (layer "F.Cu") (net 4) (tstamp 8fdb7a63-017c-4bf9-bdeb-0d540fac39ce)) + (segment (start 77.18 127.68) (end 72.1 132.76) (width 0.25) (layer "F.Cu") (net 4) (tstamp 9450e8b7-97b0-4fef-b6c2-09de9444a4da)) + (segment (start 52.69 88.49) (end 52.69 71.43) (width 0.25) (layer "F.Cu") (net 4) (tstamp 9e2e9213-6763-48c0-967c-31cb121ee944)) + (segment (start 78.0569 111.317) (end 77.18 110.44) (width 0.25) (layer "F.Cu") (net 4) (tstamp ab78860f-29ed-46ac-886f-71b5cbc58123)) + (segment (start 69.02 110.44) (end 69.02 88.8035) (width 0.25) (layer "F.Cu") (net 4) (tstamp d0570697-78d4-43c6-99c2-8047b7716482)) + (segment (start 52.69 71.43) (end 54.32 69.8) (width 0.25) (layer "F.Cu") (net 4) (tstamp d4631fd8-c765-48e9-b922-c1bd07952ee4)) + (segment (start 64.239487 88.1417) (end 60.095148 92.286039) (width 0.25) (layer "F.Cu") (net 4) (tstamp d93fad23-99ac-4ed8-83aa-8b7d89589ac0)) + (segment (start 77.18 127.68) (end 78.0569 126.803) (width 0.25) (layer "F.Cu") (net 4) (tstamp f900bd41-8a8e-4cc2-9459-860be8914972)) + (via (at 69.02 88.8035) (size 0.8) (drill 0.4) (layers "F.Cu" "B.Cu") (net 4) (tstamp 129a9b89-5231-41d6-b6b7-0b4c17a0b92c)) + (via (at 60.095148 92.286039) (size 0.8) (drill 0.4) (layers "F.Cu" "B.Cu") (net 4) (tstamp 1fae0adb-002a-477a-9d38-b1293b358999)) + (segment (start 89.88 87.58) (end 91.51 85.95) (width 0.25) (layer "B.Cu") (net 4) (tstamp 020e3c31-f49e-4bf8-afb1-a3378dbe861b)) + (segment (start 79.085 87.409) (end 79.085 87.6903) (width 0.25) (layer "B.Cu") (net 4) (tstamp 029076ff-0072-4ee6-8e0d-7d0a4bb36558)) + (segment (start 68.925 88.4999) (end 68.925 87.409) (width 0.25) (layer "B.Cu") (net 4) (tstamp 0432c1c9-9c7b-434c-8df5-f1b8cd7c2a11)) + (segment (start 79.085 87.6903) (end 78.2754 88.4999) (width 0.25) (layer "B.Cu") (net 4) (tstamp 0530d8a5-231e-4b26-8bab-e4534cf5b4d0)) + (segment (start 61.94 112.98) (end 56.86 112.98) (width 0.25) (layer "B.Cu") (net 4) (tstamp 10c684c4-384b-4bb1-9802-27a017234b10)) + (segment (start 69.9247 109.535) (end 69.02 110.44) (width 0.25) (layer "B.Cu") (net 4) (tstamp 200f0b78-46d3-4086-ba11-e7c9fdef8ef3)) + (segment (start 67.02 127.68) (end 77.18 127.68) (width 0.25) (layer "B.Cu") (net 4) (tstamp 206855e3-6ef7-4f28-be50-ae130a134168)) + (segment (start 89.88 87.58) (end 88.995 86.695) (width 0.25) (layer "B.Cu") (net 4) (tstamp 2b3a4b4c-dc26-4ea9-a6ce-f3d40a36d287)) + (segment (start 69.02 88.4999) (end 69.02 88.8035) (width 0.25) (layer "B.Cu") (net 4) (tstamp 3795d412-e14a-41e8-8f49-ab7d279b549d)) + (segment (start 66.48 112.98) (end 61.94 112.98) (width 0.25) (layer "B.Cu") (net 4) (tstamp 5bc49640-0fb6-45cf-86f7-949f08b8f773)) + (segment (start 69.02 110.44) (end 66.48 112.98) (width 0.25) (layer "B.Cu") (net 4) (tstamp 630ccbc0-97c6-498c-b9fb-b76aec5abe5a)) + (segment (start 77.18 110.44) (end 76.2753 109.535) (width 0.25) (layer "B.Cu") (net 4) (tstamp 6b04eb24-4d04-4fbc-8f8b-fecd472cb035)) + (segment (start 69.02 88.4999) (end 68.925 88.4999) (width 0.25) (layer "B.Cu") (net 4) (tstamp 89a8cd68-57ef-456b-9590-bd7f0c4ad535)) + (segment (start 91.51 71.43) (end 89.88 69.8) (width 0.25) (layer "B.Cu") (net 4) (tstamp 8c90b011-8b8c-400f-95d3-7f69d18891db)) + (segment (start 76.2753 109.535) (end 69.9247 109.535) (width 0.25) (layer "B.Cu") (net 4) (tstamp b0b7525a-365f-4a95-a51a-0538227cfddc)) + (segment (start 91.51 85.95) (end 91.51 71.43) (width 0.25) (layer "B.Cu") (net 4) (tstamp b68031b4-f189-46ec-86f8-7deeadf0408b)) + (segment (start 56.486039 92.286039) (end 54.32 90.12) (width 0.25) (layer "B.Cu") (net 4) (tstamp bc108439-51a0-405a-8800-1d928eeebab0)) + (segment (start 79.72 112.98) (end 77.18 110.44) (width 0.25) (layer "B.Cu") (net 4) (tstamp bf74106a-38d0-4ac9-894b-b3257172b551)) + (segment (start 78.2754 88.4999) (end 69.02 88.4999) (width 0.25) (layer "B.Cu") (net 4) (tstamp c61e81df-31c9-4137-9809-73b07d0f6924)) + (segment (start 82.26 112.98) (end 79.72 112.98) (width 0.25) (layer "B.Cu") (net 4) (tstamp d581192b-5ad9-44e8-8c5c-a8e50245b8ee)) + (segment (start 60.095148 92.286039) (end 56.486039 92.286039) (width 0.25) (layer "B.Cu") (net 4) (tstamp e6c6c8af-431d-44e3-80e5-8bf5b73c9e7b)) + (segment (start 79.799 86.695) (end 79.085 87.409) (width 0.25) (layer "B.Cu") (net 4) (tstamp ea06388d-501b-40d4-a754-9214f9986ba8)) + (segment (start 88.995 86.695) (end 79.799 86.695) (width 0.25) (layer "B.Cu") (net 4) (tstamp ecf260d7-8e62-49eb-b41d-e130e4bfcac0)) + (segment (start 87.34 112.98) (end 82.26 112.98) (width 0.25) (layer "B.Cu") (net 4) (tstamp ffd8f634-a55d-4ffa-b2c2-db6a48589650)) + (segment (start 81.6611 131.613) (end 80.7494 130.702) (width 0.25) (layer "F.Cu") (net 5) (tstamp 41914ef8-2b70-4516-8b91-8d4a1c6ad113)) + (segment (start 80.7494 99.7963) (end 79.72 98.7669) (width 0.25) (layer "F.Cu") (net 5) (tstamp 44f9646d-9bb7-4aa7-8f3b-13190119d9e3)) + (segment (start 81.6611 145.019) (end 81.6611 131.613) (width 0.25) (layer "F.Cu") (net 5) (tstamp 573a7f29-8016-4176-9747-7bb9b08d1bbc)) + (segment (start 80.68 146) (end 81.6611 145.019) (width 0.25) (layer "F.Cu") (net 5) (tstamp 64ca9b3b-9090-4837-b7d7-2062f1c94b8d)) + (segment (start 80.7494 130.702) (end 80.7494 99.7963) (width 0.25) (layer "F.Cu") (net 5) (tstamp 7fb442c0-5ad0-403d-8b4b-4fc69a0296fe)) + (segment (start 79.72 98.7669) (end 79.72 97.74) (width 0.25) (layer "F.Cu") (net 5) (tstamp ce845281-4dd4-45e5-8e01-fed6dd598892)) + (segment (start 76.1222 94.3447) (end 76.545 93.9219) (width 0.25) (layer "B.Cu") (net 5) (tstamp 5ee15710-e1f9-427f-a849-9bca30ae3891)) + (segment (start 77.636 98.7971) (end 76.729 98.7971) (width 0.25) (layer "B.Cu") (net 5) (tstamp 6a28c046-4bde-4928-829f-220e428921e7)) + (segment (start 79.72 97.74) (end 78.6931 97.74) (width 0.25) (layer "B.Cu") (net 5) (tstamp bfe7d129-aa68-4bf4-acb8-3382809ad7b2)) + (segment (start 78.6931 97.74) (end 77.636 98.7971) (width 0.25) (layer "B.Cu") (net 5) (tstamp c041df09-87bc-4514-ba24-8502e2981e0b)) + (segment (start 76.729 98.7971) (end 76.1222 98.1903) (width 0.25) (layer "B.Cu") (net 5) (tstamp c7bf2868-9744-4d90-ae42-781f22730798)) + (segment (start 76.1222 98.1903) (end 76.1222 94.3447) (width 0.25) (layer "B.Cu") (net 5) (tstamp ec9df18b-c318-4a01-b823-7386bafb5273)) + (segment (start 76.545 93.9219) (end 76.545 92.831) (width 0.25) (layer "B.Cu") (net 5) (tstamp ff9a395c-2705-4936-a7a2-3124e4d8609e)) + (segment (start 82.26 123.14) (end 82.26 128.22) (width 0.25) (layer "F.Cu") (net 6) (tstamp b0159e10-7e34-4899-8e29-f6ae0eb2a7ae)) + (segment (start 77.18 135.84) (end 77.18 133.3) (width 0.25) (layer "B.Cu") (net 6) (tstamp 14098f69-dbc8-4e6c-899a-833c4bd5d92f)) + (segment (start 77.18 133.3) (end 82.26 128.22) (width 0.25) (layer "B.Cu") (net 6) (tstamp 1918a999-926d-40c9-b091-a03b127d731e)) + (segment (start 80.68 135.84) (end 78.6481 133.808) (width 0.25) (layer "F.Cu") (net 7) (tstamp 32731c60-21b7-48de-9e3b-17a942cc01ad)) + (segment (start 78.6481 95.1713) (end 79.3057 94.5137) (width 0.25) (layer "F.Cu") (net 7) (tstamp 7441eda8-12bb-43ac-ba0c-28122cbfa1b2)) + (segment (start 79.3057 94.5137) (end 79.3057 88.9846) (width 0.25) (layer "F.Cu") (net 7) (tstamp 82074f95-0106-4af6-9dfe-ff0868fb3208)) + (segment (start 79.3057 88.9846) (end 76.0675 85.7464) (width 0.25) (layer "F.Cu") (net 7) (tstamp b0e70cf5-81fd-4bf0-809b-6533d48ca216)) + (segment (start 78.6481 133.808) (end 78.6481 95.1713) (width 0.25) (layer "F.Cu") (net 7) (tstamp ee70bf47-da11-4709-a104-3108b90f5480)) + (via (at 76.0675 85.7464) (size 0.8) (drill 0.4) (layers "F.Cu" "B.Cu") (net 7) (tstamp 843e8b25-8363-4680-a2c8-47ee8bbd546d)) + (segment (start 75.4958 86.3181) (end 76.0675 85.7464) (width 0.25) (layer "B.Cu") (net 7) (tstamp eda17a6f-9b34-4b77-8e87-14e7462acc5c)) + (segment (start 75.275 86.3181) (end 75.4958 86.3181) (width 0.25) (layer "B.Cu") (net 7) (tstamp f06f72e7-c9c4-4566-8b81-f93b95bf24ec)) + (segment (start 75.275 87.409) (end 75.275 86.3181) (width 0.25) (layer "B.Cu") (net 7) (tstamp f657d139-4893-4327-b7cf-2e1dfca41fb9)) + (segment (start 75.18 110.44) (end 75.18 94.2099) (width 0.25) (layer "F.Cu") (net 8) (tstamp 6bc86e2c-2996-49bf-aa44-5c72550b6336)) + (segment (start 74.01 82.5) (end 74.01 93.0399) (width 0.25) (layer "F.Cu") (net 8) (tstamp 957b566a-aea2-435e-b4cb-2c411feda973)) + (segment (start 75.18 94.2099) (end 78.5737 94.2099) (width 0.25) (layer "F.Cu") (net 8) (tstamp df89d961-57d2-49eb-bbca-59874808f559)) + (segment (start 74.01 93.0399) (end 75.18 94.2099) (width 0.25) (layer "F.Cu") (net 8) (tstamp f4e04e41-0b1f-4874-82b2-cb4080d896d3)) + (via (at 78.5737 94.2099) (size 0.8) (drill 0.4) (layers "F.Cu" "B.Cu") (net 8) (tstamp efd79e95-8324-4136-8fac-9615285e42c7)) + (segment (start 79.085 94.1379) (end 82.711 94.1379) (width 0.25) (layer "B.Cu") (net 8) (tstamp 280f19ec-4ae6-48ec-8c75-cf612e900837)) + (segment (start 83.7731 95.2) (end 84.8 95.2) (width 0.25) (layer "B.Cu") (net 8) (tstamp 39d1744e-0b1c-4b49-9a1f-df989157daa7)) + (segment (start 84.8 95.2) (end 89.88 90.12) (width 0.25) (layer "B.Cu") (net 8) (tstamp 7199385e-82ba-45a4-8d99-940d43022047)) + (segment (start 79.085 94.1379) (end 79.013 94.2099) (width 0.25) (layer "B.Cu") (net 8) (tstamp 71a3bca3-c4e9-4b67-9dfd-7c0b7b600969)) + (segment (start 79.085 92.831) (end 79.085 94.1379) (width 0.25) (layer "B.Cu") (net 8) (tstamp 8b121a54-ab83-4a67-b050-7eb62b70d62b)) + (segment (start 79.013 94.2099) (end 78.5737 94.2099) (width 0.25) (layer "B.Cu") (net 8) (tstamp 8d174f60-2811-4740-bac5-ef04d050456d)) + (segment (start 82.711 94.1379) (end 83.7731 95.2) (width 0.25) (layer "B.Cu") (net 8) (tstamp 95248e96-1c28-4d02-a242-e23471082208)) + (segment (start 82.26 91.39) (end 82.26 95.2) (width 0.25) (layer "F.Cu") (net 9) (tstamp 31842fad-80d1-4205-ade9-cb599793e47c)) + (segment (start 84.8 90.12) (end 83.53 90.12) (width 0.25) (layer "F.Cu") (net 9) (tstamp 66071923-5a15-412d-8a71-fbc223391dfd)) + (segment (start 83.53 90.12) (end 83.53 69.8) (width 0.25) (layer "F.Cu") (net 9) (tstamp a47341c9-1190-4a53-ab9c-3cba13e5ed44)) + (segment (start 82.26 95.2) (end 82.26 105.36) (width 0.25) (layer "F.Cu") (net 9) (tstamp f6f6da33-710a-43ce-a559-5bb62d603a7a)) + (segment (start 83.53 90.12) (end 82.26 91.39) (width 0.25) (layer "F.Cu") (net 9) (tstamp ffcd4bda-db79-4da9-a8a3-635187e176a4)) + (segment (start 78.0569 118.06) (end 81.8669 114.25) (width 0.25) (layer "B.Cu") (net 9) (tstamp 1560c018-4a1e-46d8-af76-960dc75055c1)) + (segment (start 88.4173 113.412) (end 88.4173 112.604) (width 0.25) (layer "B.Cu") (net 9) (tstamp 42827461-628a-47fa-b08f-33f87ae0f439)) + (segment (start 87.4211 111.608) (end 84.5051 111.608) (width 0.25) (layer "B.Cu") (net 9) (tstamp 5a20b21c-7f67-48bc-9682-35ad7807ea62)) + (segment (start 81.8669 114.25) (end 87.5788 114.25) (width 0.25) (layer "B.Cu") (net 9) (tstamp 75a2aedf-a1f0-436d-8b60-33805d7773c0)) + (segment (start 83.1799 91.7401) (end 84.8 90.12) (width 0.25) (layer "B.Cu") (net 9) (tstamp 7c315e74-68bb-47b9-b791-ef151f0a99ad)) + (segment (start 88.4173 112.604) (end 87.4211 111.608) (width 0.25) (layer "B.Cu") (net 9) (tstamp 7e905f53-d12e-4c6c-a95f-df022685b381)) + (segment (start 81.2331 106.387) (end 82.26 105.36) (width 0.25) (layer "B.Cu") (net 9) (tstamp 82145b9e-be81-43ed-8d4c-cd2e1ab3fd4b)) + (segment (start 75.275 92.831) (end 75.275 91.7401) (width 0.25) (layer "B.Cu") (net 9) (tstamp 85374f5c-03dc-4f1c-8f58-2f107fc1a33c)) + (segment (start 77.18 118.06) (end 78.0569 118.06) (width 0.25) (layer "B.Cu") (net 9) (tstamp 9d88e646-edf9-45bb-bbb5-cc7967393bf8)) + (segment (start 75.275 91.7401) (end 83.1799 91.7401) (width 0.25) (layer "B.Cu") (net 9) (tstamp d7df7ffb-ecb6-4cfa-80e1-3c7a3f2bbb6b)) + (segment (start 87.5788 114.25) (end 88.4173 113.412) (width 0.25) (layer "B.Cu") (net 9) (tstamp d7fdcb52-26a4-411b-9067-9dc16e26cf3a)) + (segment (start 81.2331 108.336) (end 81.2331 106.387) (width 0.25) (layer "B.Cu") (net 9) (tstamp e1747144-0d21-49d5-ac45-6910079b9df8)) + (segment (start 84.5051 111.608) (end 81.2331 108.336) (width 0.25) (layer "B.Cu") (net 9) (tstamp eda48c8b-865b-4453-bb6c-28f1fe4934bd)) + (segment (start 55.8247 114.485) (end 55.8247 108.935) (width 0.25) (layer "F.Cu") (net 10) (tstamp 3d94bf94-28b3-4501-b4e5-bbbc21f0c949)) + (segment (start 56.86 115.52) (end 55.8247 114.485) (width 0.25) (layer "F.Cu") (net 10) (tstamp 78c82b5b-d8e9-4a93-8bb4-08ddcecc90ac)) + (segment (start 56.86 120.6) (end 56.86 115.52) (width 0.25) (layer "F.Cu") (net 10) (tstamp 8bc8fa6f-f48a-4d7e-b848-d901e2c7b02e)) + (segment (start 55.8247 108.935) (end 56.86 107.9) (width 0.25) (layer "F.Cu") (net 10) (tstamp 8d6d4c9e-08f9-43b5-bb33-9ad274829d64)) + (segment (start 61.94 115.52) (end 61.94 120.6) (width 0.25) (layer "F.Cu") (net 10) (tstamp f8152bbb-c6e7-404e-ad64-6339be0b407c)) + (segment (start 56.86 115.52) (end 61.94 115.52) (width 0.25) (layer "B.Cu") (net 10) (tstamp 09d0e9dc-d1bc-43cc-9c6c-0862846af11f)) + (segment (start 61.94 107.9) (end 56.86 107.9) (width 0.25) (layer "B.Cu") (net 10) (tstamp 2f01dbc9-351e-4cd9-8350-7b66a53b3ee3)) + (segment (start 67.02 124.803) (end 66.1431 124.803) (width 0.25) (layer "B.Cu") (net 10) (tstamp 82e8cd85-55c3-47ef-9c76-b8c2ac0db5ae)) + (segment (start 66.1431 124.803) (end 61.94 120.6) (width 0.25) (layer "B.Cu") (net 10) (tstamp b3f79d25-bf79-4404-b7e2-192cb54d8962)) + (segment (start 67.02 125.68) (end 67.02 124.803) (width 0.25) (layer "B.Cu") (net 10) (tstamp e49e4464-7b1a-47ea-ae3c-56146c0d6e75)) + (segment (start 62.1037 143.619) (end 63.52 145.036) (width 0.25) (layer "F.Cu") (net 11) (tstamp 0ca72782-37d6-4240-902d-cbcc30ba93f5)) + (segment (start 63.52 145.036) (end 63.52 146) (width 0.25) (layer "F.Cu") (net 11) (tstamp 34390c90-540c-4185-a10a-d335e2d03290)) + (segment (start 56.86 128.22) (end 62.1037 133.464) (width 0.25) (layer "F.Cu") (net 11) (tstamp 525f5242-96e3-4301-92db-2e87ab6fca9a)) + (segment (start 56.86 123.14) (end 56.86 128.22) (width 0.25) (layer "F.Cu") (net 11) (tstamp 602dbfaf-c2bd-4fbe-aefd-0c62402095c1)) + (segment (start 62.1037 133.464) (end 62.1037 143.619) (width 0.25) (layer "F.Cu") (net 11) (tstamp e4222a8c-64d3-40a1-bcd8-c54f2a1e1c9a)) + (segment (start 68.0514 99.7983) (end 68.0514 144.969) (width 0.25) (layer "F.Cu") (net 12) (tstamp 4b384b9a-ace7-414f-85f4-36c871b82c79)) + (segment (start 67.02 97.74) (end 67.02 98.7669) (width 0.25) (layer "F.Cu") (net 12) (tstamp 98edad9e-9b7d-4306-acd9-bcd21ca6ec8f)) + (segment (start 68.0514 144.969) (end 67.02 146) (width 0.25) (layer "F.Cu") (net 12) (tstamp a50917f3-82e3-4232-b42d-13ef12c3d26b)) + (segment (start 67.02 98.7669) (end 68.0514 99.7983) (width 0.25) (layer "F.Cu") (net 12) (tstamp c8e59ab2-0126-4ee4-bcb4-f9feb13b6814)) + (segment (start 66.385 96.0781) (end 66.385 92.831) (width 0.25) (layer "B.Cu") (net 12) (tstamp 2c42c174-72da-4bbb-a82d-72bf4284b146)) + (segment (start 67.02 96.7131) (end 66.385 96.0781) (width 0.25) (layer "B.Cu") (net 12) (tstamp 93a8ecaa-164f-41e8-9c1d-541a4b1a161d)) + (segment (start 67.02 97.74) (end 67.02 96.7131) (width 0.25) (layer "B.Cu") (net 12) (tstamp f2759f14-3b40-4461-975f-25b120ec3674)) + (segment (start 63.52 135.84) (end 63.52 129.8) (width 0.25) (layer "F.Cu") (net 13) (tstamp 883338c8-980d-4e1d-9d4f-d6f471350e92)) + (segment (start 61.94 128.22) (end 61.94 123.14) (width 0.25) (layer "F.Cu") (net 13) (tstamp cd2e08c0-8a72-4ef4-b9a7-37cb0ae7dbb2)) + (segment (start 63.52 129.8) (end 61.94 128.22) (width 0.25) (layer "F.Cu") (net 13) (tstamp e731ea8a-6512-4fe7-bfe8-b56cca27c23b)) + (segment (start 71.993 89.3417) (end 71.993 130.895) (width 0.25) (layer "F.Cu") (net 14) (tstamp e71206d0-2c47-4a18-b799-e120635c32c0)) + (via (at 71.993 89.3417) (size 0.8) (drill 0.4) (layers "F.Cu" "B.Cu") (net 14) (tstamp 6745eadc-a326-4828-968d-40149ee02b9c)) + (via (at 71.993 130.895) (size 0.8) (drill 0.4) (layers "F.Cu" "B.Cu") (net 14) (tstamp da7e2f3d-6a3d-4336-89bf-fa2b660c52a9)) + (segment (start 65.115 88.4999) (end 66.2361 89.621) (width 0.25) (layer "B.Cu") (net 14) (tstamp 44c9fbd7-3e6c-4f9f-a9aa-cbf9eb94339f)) + (segment (start 67.02 135.84) (end 71.9652 130.895) (width 0.25) (layer "B.Cu") (net 14) (tstamp 55a88de6-1015-463d-8152-70fedcfb064a)) + (segment (start 71.7137 89.621) (end 71.993 89.3417) (width 0.25) (layer "B.Cu") (net 14) (tstamp 681fecbd-1830-4319-a4eb-42d9b2d8200b)) + (segment (start 66.2361 89.621) (end 71.7137 89.621) (width 0.25) (layer "B.Cu") (net 14) (tstamp bced0748-3286-497f-ae13-16e6340c61ac)) + (segment (start 71.9652 130.895) (end 71.993 130.895) (width 0.25) (layer "B.Cu") (net 14) (tstamp ea09fdd4-7fcb-4ea7-932c-612be1cc212e)) + (segment (start 65.115 87.409) (end 65.115 88.4999) (width 0.25) (layer "B.Cu") (net 14) (tstamp f69e1b79-d430-4766-893a-12271e1f07d6)) + (segment (start 67.02 106.931) (end 67.02 110.44) (width 0.25) (layer "F.Cu") (net 15) (tstamp 2910ffe7-604c-4c0c-92f1-d80a476295d5)) + (segment (start 54.32 83.13) (end 53.69 82.5) (width 0.25) (layer "F.Cu") (net 15) (tstamp 3922cd73-735e-4b43-8249-8f5016ce11a9)) + (segment (start 54.32 87.58) (end 54.32 83.13) (width 0.25) (layer "F.Cu") (net 15) (tstamp 475ceb0f-2125-4176-a545-b93ccaccc8e8)) + (segment (start 61.94 95.2) (end 61.94 101.851) (width 0.25) (layer "F.Cu") (net 15) (tstamp 6c0e36f5-45c4-4998-9874-6ae5edd9c3ff)) + (segment (start 61.94 101.851) (end 67.02 106.931) (width 0.25) (layer "F.Cu") (net 15) (tstamp 7296ec70-977c-49dd-9deb-9bb59ba7a870)) + (segment (start 58.3644 94.7814) (end 61.4057 91.7401) (width 0.25) (layer "B.Cu") (net 15) (tstamp 09c17a1b-c829-4891-af5d-6b9d4636f772)) + (segment (start 68.925 91.7401) (end 68.925 92.831) (width 0.25) (layer "B.Cu") (net 15) (tstamp 0c13af30-6978-4c11-9ea3-420ba2531c89)) + (segment (start 61.4057 91.7401) (end 68.925 91.7401) (width 0.25) (layer "B.Cu") (net 15) (tstamp 22f17e60-7d79-4936-b43a-ff8af616a405)) + (segment (start 61.4057 91.7401) (end 58.4801 91.7401) (width 0.25) (layer "B.Cu") (net 15) (tstamp 78fed139-5eaf-49fc-9910-d10f12339d29)) + (segment (start 61.94 95.2) (end 60.9131 95.2) (width 0.25) (layer "B.Cu") (net 15) (tstamp 96f7d759-9760-4750-82ea-297b16461ed8)) + (segment (start 58.3644 95.7155) (end 58.3644 94.7814) (width 0.25) (layer "B.Cu") (net 15) (tstamp a45f40d4-b978-47b7-84ce-041919e2732e)) + (segment (start 60.9131 95.2) (end 59.8674 96.2457) (width 0.25) (layer "B.Cu") (net 15) (tstamp b65b2349-5006-446b-8e4e-8ef2abbbd3d6)) + (segment (start 59.8674 96.2457) (end 58.8946 96.2457) (width 0.25) (layer "B.Cu") (net 15) (tstamp bad9567c-8494-4f2c-a2d8-616e5ae3134c)) + (segment (start 58.8946 96.2457) (end 58.3644 95.7155) (width 0.25) (layer "B.Cu") (net 15) (tstamp d0a3cc18-d901-4332-9a9f-251f38b82aa0)) + (segment (start 58.4801 91.7401) (end 54.32 87.58) (width 0.25) (layer "B.Cu") (net 15) (tstamp d74b8be1-f3d3-4ae9-9ba4-ab20e1ae50d4)) + (segment (start 67.02 117.183) (end 66.1431 116.306) (width 0.25) (layer "F.Cu") (net 16) (tstamp 00cabc8d-c100-45fd-a637-c0db99669427)) + (segment (start 59.4 102.82) (end 59.4 95.2) (width 0.25) (layer "F.Cu") (net 16) (tstamp 14f836c7-f4c6-48a2-a7d3-4e75e85acc7a)) + (segment (start 66.1431 116.306) (end 66.1431 109.563) (width 0.25) (layer "F.Cu") (net 16) (tstamp 27a5431f-bd2c-4dba-8fce-f7761532ed6a)) + (segment (start 61.94 105.36) (end 59.4 102.82) (width 0.25) (layer "F.Cu") (net 16) (tstamp 6a77169d-27c3-4a31-9c60-4d382d5f35bd)) + (segment (start 66.1431 109.563) (end 61.94 105.36) (width 0.25) (layer "F.Cu") (net 16) (tstamp 73cdbe46-1aab-4b3b-a95a-46ee80046098)) + (segment (start 59.4 90.12) (end 59.4 95.2) (width 0.25) (layer "F.Cu") (net 16) (tstamp 75391f0c-3271-4ec5-aaac-a2a1e343d223)) + (segment (start 59.4 90.12) (end 60.67 88.85) (width 0.25) (layer "F.Cu") (net 16) (tstamp 7988efa7-b56d-4fb0-8e46-9b1fceee1924)) + (segment (start 60.67 88.85) (end 60.67 69.8) (width 0.25) (layer "F.Cu") (net 16) (tstamp b211ee2c-923e-4dc7-934f-102069ae344e)) + (segment (start 67.02 118.06) (end 67.02 117.183) (width 0.25) (layer "F.Cu") (net 16) (tstamp c7e90134-c1ca-41d2-9f2b-326e7eb00edf)) + (segment (start 60.6781 93.9219) (end 59.4 95.2) (width 0.25) (layer "B.Cu") (net 16) (tstamp 5d8a60ec-b607-42fb-bd54-f442e57b58e1)) + (segment (start 65.115 92.831) (end 65.115 93.9219) (width 0.25) (layer "B.Cu") (net 16) (tstamp a66f2ae3-4e0d-4e5c-ad5d-28687e29946e)) + (segment (start 65.115 93.9219) (end 60.6781 93.9219) (width 0.25) (layer "B.Cu") (net 16) (tstamp b8a0e001-7d95-4223-b6dc-ac505a30a25f)) + (segment (start 76.545 87.409) (end 76.545 86.97) (width 0.25) (layer "B.Cu") (net 17) (tstamp 15fb4488-c77b-4ed5-943c-3aecb1e90899)) + (segment (start 76.545 86.97) (end 76.545 86.3181) (width 0.25) (layer "B.Cu") (net 17) (tstamp 4fc93a51-8800-4e0e-8544-1948b010618d)) + (segment (start 76.545 86.3181) (end 77.18 85.6831) (width 0.25) (layer "B.Cu") (net 17) (tstamp 5346eda4-b8c3-425a-b209-9c2387e42948)) + (segment (start 76.545 86.97) (end 81.015 82.5) (width 0.25) (layer "B.Cu") (net 17) (tstamp 782f273c-d66f-494a-a334-82534584f161)) + (segment (start 81.015 82.5) (end 90.51 82.5) (width 0.25) (layer "B.Cu") (net 17) (tstamp c4d23696-79ef-48b8-924d-71124997f7d1)) + (segment (start 76.545 87.409) (end 76.545 86.97) (width 0.25) (layer "B.Cu") (net 17) (tstamp db1e748a-a37c-45e4-8908-7c0726ef47e5)) + (segment (start 77.18 85.6831) (end 77.18 69.8) (width 0.25) (layer "B.Cu") (net 17) (tstamp e8952c88-2ff7-4c9a-93a7-0b443318542b)) + (segment (start 81.235 103.433368) (end 81.535 103.733368) (width 0.25) (layer "F.Cu") (net 18) (tstamp 38ff7c46-3302-4c46-97b4-01524f2ca987)) + (segment (start 82.26 85.04) (end 81.235 86.065) (width 0.25) (layer "F.Cu") (net 18) (tstamp 712642e8-978d-42f8-891f-fb049b9a03a8)) + (segment (start 81.235 86.065) (end 81.235 103.433368) (width 0.25) (layer "F.Cu") (net 18) (tstamp fd70234b-9e1f-48f4-9457-dd2fb950e815)) + (via (at 81.535 103.733368) (size 0.8) (drill 0.4) (layers "F.Cu" "B.Cu") (free) (net 18) (tstamp 90e0f111-236a-4b30-a086-7725295994ec)) + (via (at 82.26 85.04) (size 0.8) (drill 0.4) (layers "F.Cu" "B.Cu") (free) (net 18) (tstamp afc373d2-a652-40d4-9e6d-d2ad495edf5f)) + (segment (start 77.815 86.945) (end 79.72 85.04) (width 0.25) (layer "B.Cu") (net 18) (tstamp 063fbf71-f8cb-4d1a-a803-e692529302e5)) + (segment (start 81.535 103.733368) (end 81.423368 103.845) (width 0.25) (layer "B.Cu") (net 18) (tstamp 0fed3795-646d-493f-a00a-9135fcf25d98)) + (segment (start 81.423368 103.845) (end 78.205 103.845) (width 0.25) (layer "B.Cu") (net 18) (tstamp 3f64d733-b10d-4eb1-9924-5c351fb08947)) + (segment (start 77.815 87.409) (end 77.815 86.945) (width 0.25) (layer "B.Cu") (net 18) (tstamp 5ea56ae5-168a-4b8d-8b7f-9725c2305690)) + (segment (start 79.72 85.04) (end 82.26 85.04) (width 0.25) (layer "B.Cu") (net 18) (tstamp 6369661c-b339-4912-a714-0fe29e7017ba)) + (segment (start 78.205 103.845) (end 77.18 102.82) (width 0.25) (layer "B.Cu") (net 18) (tstamp f3f332f9-f8c1-47bd-bf81-dcb08f220c34)) + (segment (start 77.815 96.712) (end 80.1524 96.712) (width 0.25) (layer "B.Cu") (net 19) (tstamp 3e5c4264-ebe0-4943-a1e2-ed5cdc893266)) + (segment (start 80.7799 97.3395) (end 80.7799 100.733) (width 0.25) (layer "B.Cu") (net 19) (tstamp 648291b4-1793-4d0d-8844-5b3e4252de96)) + (segment (start 80.1524 96.712) (end 80.7799 97.3395) (width 0.25) (layer "B.Cu") (net 19) (tstamp 7b38de57-0ae7-481e-9235-37862d438bee)) + (segment (start 77.815 97.105) (end 77.18 97.74) (width 0.25) (layer "B.Cu") (net 19) (tstamp 87ca52d1-e702-47fc-bf24-185407e7a018)) + (segment (start 77.815 92.831) (end 77.815 96.712) (width 0.25) (layer "B.Cu") (net 19) (tstamp bf93c692-d5e7-42ec-bb4e-a4c87b3c3782)) + (segment (start 77.815 96.712) (end 77.815 97.105) (width 0.25) (layer "B.Cu") (net 19) (tstamp c2a0763b-38c3-4b07-9c87-46a3bd0f3d36)) + (segment (start 79.72 101.793) (end 79.72 102.82) (width 0.25) (layer "B.Cu") (net 19) (tstamp d7783c50-c985-44d8-b643-48f90045348d)) + (segment (start 80.7799 100.733) (end 79.72 101.793) (width 0.25) (layer "B.Cu") (net 19) (tstamp ede63222-c37a-4bfc-8ce8-f8abc11abb36)) + (segment (start 70.19 72.97) (end 67.02 69.8) (width 0.25) (layer "F.Cu") (net 20) (tstamp 608f77e5-afeb-4db6-8b4c-46e82aba6c44)) + (segment (start 70.19 82.5) (end 70.19 72.97) (width 0.25) (layer "F.Cu") (net 20) (tstamp c316ca98-7217-449e-a56d-91f1b9718488)) + (segment (start 66.385 86.305) (end 70.19 82.5) (width 0.25) (layer "B.Cu") (net 20) (tstamp 0fd89712-c318-48bb-86be-fa4d0ee029b8)) + (segment (start 66.385 87.409) (end 66.385 86.305) (width 0.25) (layer "B.Cu") (net 20) (tstamp 9d60bca0-1292-4f02-b5a1-6818b95ba169)) + (segment (start 63.408 92.7469) (end 67.2882 88.8667) (width 0.25) (layer "F.Cu") (net 21) (tstamp 13d023bc-9d85-4068-b227-fc5b7a565a47)) + (segment (start 64.48 102.82) (end 63.408 101.748) (width 0.25) (layer "F.Cu") (net 21) (tstamp b74df6aa-35da-4837-a2e6-84a929020af0)) + (segment (start 63.408 101.748) (end 63.408 92.7469) (width 0.25) (layer "F.Cu") (net 21) (tstamp b853bc9c-82f1-41c5-865a-8f6dc4b063c1)) + (via (at 67.2882 88.8667) (size 0.8) (drill 0.4) (layers "F.Cu" "B.Cu") (net 21) (tstamp 7371fcbc-d990-417b-9c77-ee18d76d9c18)) + (segment (start 67.655 88.4999) (end 67.2882 88.8667) (width 0.25) (layer "B.Cu") (net 21) (tstamp 0aca4605-d128-4db8-97d3-71b36608bbbd)) + (segment (start 67.655 87.409) (end 67.655 88.4999) (width 0.25) (layer "B.Cu") (net 21) (tstamp 675e5738-7367-4fbd-b9e2-c18920357f16)) + (segment (start 64.48 99.2531) (end 64.48 97.74) (width 0.25) (layer "F.Cu") (net 22) (tstamp 05a512b3-b2a0-4588-aa5f-f0e916ade693)) + (segment (start 67.02 101.793) (end 64.48 99.2531) (width 0.25) (layer "F.Cu") (net 22) (tstamp 59162bae-baf1-41e6-876f-3c170a31c870)) + (segment (start 67.02 102.82) (end 67.02 101.793) (width 0.25) (layer "F.Cu") (net 22) (tstamp 8ccc9c35-dea0-4b35-a02f-925a9b479e49)) + (segment (start 68.0616 98.1759) (end 67.4514 98.7861) (width 0.25) (layer "B.Cu") (net 22) (tstamp 39fe054d-90d4-4a40-b218-56599c5f40db)) + (segment (start 67.655 92.831) (end 67.655 93.9219) (width 0.25) (layer "B.Cu") (net 22) (tstamp 4d85a315-8755-4acd-a8a5-e11dc98c56a8)) + (segment (start 67.655 93.9219) (end 68.0616 94.3285) (width 0.25) (layer "B.Cu") (net 22) (tstamp b4e069a2-72f4-4b60-8e22-754acc96e87a)) + (segment (start 68.0616 94.3285) (end 68.0616 98.1759) (width 0.25) (layer "B.Cu") (net 22) (tstamp cf2347a4-b616-42dd-82c4-3e8831a95ae1)) + (segment (start 65.5261 98.7861) (end 64.48 97.74) (width 0.25) (layer "B.Cu") (net 22) (tstamp dc55bf62-9fd2-4d96-b49a-5377c281e192)) + (segment (start 67.4514 98.7861) (end 65.5261 98.7861) (width 0.25) (layer "B.Cu") (net 22) (tstamp e018ca69-42c2-4dd7-a638-951a090e6e08)) + (segment (start 87.34 130.76) (end 87.34 151.08) (width 0.25) (layer "F.Cu") (net 23) (tstamp 5af7fdc9-f6dc-4736-bf14-91c7c0b2619b)) + (segment (start 87.34 151.08) (end 82.26 156.16) (width 0.25) (layer "F.Cu") (net 23) (tstamp 9cc93276-0e29-4094-8a03-345dfcbd198f)) + (segment (start 82.26 130.76) (end 82.26 151.08) (width 0.25) (layer "F.Cu") (net 24) (tstamp 20cef1fc-af0f-4b59-9d11-c24cc50e6dc2)) + (segment (start 82.26 151.08) (end 77.18 156.16) (width 0.25) (layer "F.Cu") (net 24) (tstamp df803807-b0c8-4f87-8ba8-e20a8f26b6ef)) + (segment (start 56.86 151.08) (end 61.94 156.16) (width 0.25) (layer "F.Cu") (net 25) (tstamp 38341714-caa4-4f5a-8229-91df7acc3f58)) + (segment (start 56.86 130.76) (end 56.86 151.08) (width 0.25) (layer "F.Cu") (net 25) (tstamp 8beb86d4-1bbc-429a-ac58-7a070fe8ff8b)) + (segment (start 64.4844 153.624) (end 67.02 156.16) (width 0.25) (layer "F.Cu") (net 26) (tstamp 18ef5a20-c8d3-4071-be43-07b7a6fb1c73)) + (segment (start 64.4844 138.542) (end 64.4844 153.624) (width 0.25) (layer "F.Cu") (net 26) (tstamp 47ef807b-b281-4de9-8565-96981b28e991)) + (segment (start 62.5556 136.613) (end 64.4844 138.542) (width 0.25) (layer "F.Cu") (net 26) (tstamp 5f13957e-bdbf-4b30-91de-426889aa6dcc)) + (segment (start 61.94 131.787) (end 62.5556 132.402) (width 0.25) (layer "F.Cu") (net 26) (tstamp b252279e-62aa-430e-9c8d-2aa3674c6203)) + (segment (start 62.5556 132.402) (end 62.5556 136.613) (width 0.25) (layer "F.Cu") (net 26) (tstamp dbe52a5c-087a-4eb5-9e2f-d99eaff09807)) + (segment (start 61.94 130.76) (end 61.94 131.787) (width 0.25) (layer "F.Cu") (net 26) (tstamp e9b6b720-aef4-4a33-b698-8530db7a71d0)) + +) diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/mic_preamp_pcb_prototype_p2.kicad_prl b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/mic_preamp_pcb_prototype_p2.kicad_prl index f5d1ea0..c07fbae 100644 --- a/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/mic_preamp_pcb_prototype_p2.kicad_prl +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/mic_preamp_pcb_prototype_p2.kicad_prl @@ -1,6 +1,6 @@ { "board": { - "active_layer": 34, + "active_layer": 2, "active_layer_preset": "", "auto_track_width": true, "hidden_netclasses": [], @@ -10,6 +10,7 @@ "opacity": { "images": 0.6, "pads": 1.0, + "shapes": 1.0, "tracks": 1.0, "vias": 1.0, "zones": 0.6 @@ -28,49 +29,102 @@ "zones": true }, "visible_items": [ + "vias", + "footprint_text", + "footprint_anchors", + "ratsnest", + "footprints_front", + "footprints_back", + "footprint_values", + "footprint_references", + "tracks", + "drc_errors", + "drawing_sheet", + "bitmaps", + "pads", + "zones", + "drc_warnings", + "locked_item_shadows", + "conflict_shadows", + "shapes" + ], + "visible_layers": "00000000_00000000_0fffffff_ffffffff", + "zone_display_mode": 0 + }, + "git": { + "integration_disabled": false, + "repo_type": "", + "repo_username": "", + "ssh_key": "" + }, + "meta": { + "filename": "mic_preamp_pcb_prototype_p2.kicad_prl", + "version": 5 + }, + "net_inspector_panel": { + "col_hidden": [ + false, + false, + false, + false, + false, + false, + false, + false, + false, + false + ], + "col_order": [ 0, 1, 2, 3, 4, 5, + 6, + 7, 8, - 9, - 10, - 11, - 13, - 15, - 16, - 17, - 18, - 19, - 20, - 21, - 22, - 23, - 24, - 25, - 26, - 27, - 28, - 29, - 30, - 32, - 33, - 34, - 35, - 36, - 39, - 40 + 9 ], - "visible_layers": "fffffff_ffffffff", - "zone_display_mode": 0 - }, - "meta": { - "filename": "mic_preamp_pcb_prototype_p2.kicad_prl", - "version": 3 + "col_widths": [ + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0 + ], + "custom_group_rules": [], + "expanded_rows": [], + "filter_by_net_name": true, + "filter_by_netclass": true, + "filter_text": "", + "group_by_constraint": false, + "group_by_netclass": false, + "show_unconnected_nets": false, + "show_zero_pad_nets": false, + "sort_ascending": true, + "sorting_column": 0 }, + "open_jobsets": [], "project": { "files": [] + }, + "schematic": { + "selection_filter": { + "graphics": true, + "images": true, + "labels": true, + "lockedItems": false, + "otherItems": true, + "pins": true, + "symbols": true, + "text": true, + "wires": true + } } } diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/mic_preamp_pcb_prototype_p2.kicad_pro b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/mic_preamp_pcb_prototype_p2.kicad_pro index c8d3bbb..d5414f9 100644 --- a/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/mic_preamp_pcb_prototype_p2.kicad_pro +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/mic_preamp_pcb_prototype_p2.kicad_pro @@ -3,14 +3,17 @@ "3dviewports": [], "design_settings": { "defaults": { - "board_outline_line_width": 0.09999999999999999, - "copper_line_width": 0.19999999999999998, + "apply_defaults_to_fp_fields": false, + "apply_defaults_to_fp_shapes": false, + "apply_defaults_to_fp_text": false, + "board_outline_line_width": 0.1, + "copper_line_width": 0.2, "copper_text_italic": false, "copper_text_size_h": 1.5, "copper_text_size_v": 1.5, "copper_text_thickness": 0.3, "copper_text_upright": false, - "courtyard_line_width": 0.049999999999999996, + "courtyard_line_width": 0.05, "dimension_precision": 4, "dimension_units": 3, "dimensions": { @@ -21,7 +24,7 @@ "text_position": 0, "units_format": 1 }, - "fab_line_width": 0.09999999999999999, + "fab_line_width": 0.1, "fab_text_italic": false, "fab_text_size_h": 1.0, "fab_text_size_v": 1.0, @@ -66,15 +69,20 @@ "copper_edge_clearance": "error", "copper_sliver": "warning", "courtyards_overlap": "error", + "creepage": "error", "diff_pair_gap_out_of_range": "error", "diff_pair_uncoupled_length_too_long": "error", "drill_out_of_range": "error", "duplicate_footprints": "warning", "extra_footprint": "warning", "footprint": "error", + "footprint_filters_mismatch": "ignore", + "footprint_symbol_mismatch": "warning", "footprint_type_mismatch": "ignore", "hole_clearance": "error", "hole_near_hole": "error", + "hole_to_hole": "error", + "holes_co_located": "warning", "invalid_outline": "error", "isolated_copper": "warning", "item_on_disabled_layer": "error", @@ -84,9 +92,11 @@ "lib_footprint_mismatch": "warning", "malformed_courtyard": "error", "microvia_drill_out_of_range": "error", + "mirrored_text_on_front_layer": "warning", "missing_courtyard": "ignore", "missing_footprint": "warning", "net_conflict": "warning", + "nonmirrored_text_on_back_layer": "warning", "npth_inside_courtyard": "ignore", "padstack": "warning", "pth_inside_courtyard": "ignore", @@ -98,10 +108,13 @@ "solder_mask_bridge": "error", "starved_thermal": "error", "text_height": "warning", + "text_on_edge_cuts": "error", "text_thickness": "warning", "through_hole_pad_without_hole": "error", "too_many_vias": "error", + "track_angle": "error", "track_dangling": "warning", + "track_segment_length": "error", "track_width": "error", "tracks_crossing": "error", "unconnected_items": "error", @@ -114,17 +127,18 @@ "min_clearance": 0.0, "min_connection": 0.0, "min_copper_edge_clearance": 0.0, + "min_groove_width": 0.0, "min_hole_clearance": 0.25, "min_hole_to_hole": 0.25, - "min_microvia_diameter": 0.19999999999999998, - "min_microvia_drill": 0.09999999999999999, + "min_microvia_diameter": 0.2, + "min_microvia_drill": 0.1, "min_resolved_spokes": 2, "min_silk_clearance": 0.0, - "min_text_height": 0.7999999999999999, + "min_text_height": 0.8, "min_text_thickness": 0.08, "min_through_hole_diameter": 0.3, "min_track_width": 0.0, - "min_via_annular_width": 0.09999999999999999, + "min_via_annular_width": 0.1, "min_via_diameter": 0.5, "solder_mask_clearance": 0.0, "solder_mask_min_width": 0.0, @@ -133,40 +147,44 @@ }, "teardrop_options": [ { - "td_allow_use_two_tracks": true, - "td_curve_segcount": 5, - "td_on_pad_in_zone": false, - "td_onpadsmd": true, + "td_onpthpad": true, "td_onroundshapesonly": false, + "td_onsmdpad": true, "td_ontrackend": false, - "td_onviapad": true + "td_onvia": true } ], "teardrop_parameters": [ { - "td_curve_segcount": 0, + "td_allow_use_two_tracks": true, + "td_curve_segcount": 1, "td_height_ratio": 1.0, "td_length_ratio": 0.5, "td_maxheight": 2.0, "td_maxlen": 1.0, + "td_on_pad_in_zone": false, "td_target_name": "td_round_shape", "td_width_to_size_filter_ratio": 0.9 }, { - "td_curve_segcount": 0, + "td_allow_use_two_tracks": true, + "td_curve_segcount": 1, "td_height_ratio": 1.0, "td_length_ratio": 0.5, "td_maxheight": 2.0, "td_maxlen": 1.0, + "td_on_pad_in_zone": false, "td_target_name": "td_rect_shape", "td_width_to_size_filter_ratio": 0.9 }, { - "td_curve_segcount": 0, + "td_allow_use_two_tracks": true, + "td_curve_segcount": 1, "td_height_ratio": 1.0, "td_length_ratio": 0.5, "td_maxheight": 2.0, "td_maxlen": 1.0, + "td_on_pad_in_zone": false, "td_target_name": "td_track_end", "td_width_to_size_filter_ratio": 0.9 } @@ -174,6 +192,32 @@ "track_widths": [ 0.0 ], + "tuning_pattern_settings": { + "diff_pair_defaults": { + "corner_radius_percentage": 80, + "corner_style": 1, + "max_amplitude": 1.0, + "min_amplitude": 0.2, + "single_sided": false, + "spacing": 1.0 + }, + "diff_pair_skew_defaults": { + "corner_radius_percentage": 80, + "corner_style": 1, + "max_amplitude": 1.0, + "min_amplitude": 0.2, + "single_sided": false, + "spacing": 0.6 + }, + "single_track_defaults": { + "corner_radius_percentage": 80, + "corner_style": 1, + "max_amplitude": 1.0, + "min_amplitude": 0.2, + "single_sided": false, + "spacing": 0.6 + } + }, "via_dimensions": [ { "diameter": 0.0, @@ -182,6 +226,14 @@ ], "zones_allow_external_fillets": false }, + "ipc2581": { + "dist": "", + "distpn": "", + "internal_id": "", + "mfg": "", + "mpn": "" + }, + "layer_pairs": [], "layer_presets": [], "viewports": [] }, @@ -376,10 +428,15 @@ "duplicate_sheet_names": "error", "endpoint_off_grid": "warning", "extra_units": "error", + "footprint_filter": "ignore", + "footprint_link_issues": "warning", + "four_way_junction": "ignore", "global_label_dangling": "warning", "hier_label_mismatch": "error", "label_dangling": "error", + "label_multiple_wires": "warning", "lib_symbol_issues": "warning", + "lib_symbol_mismatch": "warning", "missing_bidi_pin": "warning", "missing_input_pin": "warning", "missing_power_pin": "error", @@ -392,9 +449,15 @@ "pin_not_driven": "error", "pin_to_pin": "warning", "power_pin_not_driven": "error", + "same_local_global_label": "warning", + "similar_label_and_power": "warning", "similar_labels": "warning", + "similar_power": "warning", "simulation_model_issue": "ignore", + "single_global_label": "ignore", "unannotated": "error", + "unconnected_wire_endpoint": "warning", + "undefined_netclass": "error", "unit_value_mismatch": "error", "unresolved_variable": "error", "wire_dangling": "error" @@ -406,7 +469,7 @@ }, "meta": { "filename": "mic_preamp_pcb_prototype_p2.kicad_pro", - "version": 1 + "version": 3 }, "net_settings": { "classes": [ @@ -421,6 +484,7 @@ "microvia_drill": 0.1, "name": "Default", "pcb_color": "rgba(0, 0, 0, 0.000)", + "priority": 2147483647, "schematic_color": "rgba(0, 0, 0, 0.000)", "track_width": 0.25, "via_diameter": 0.8, @@ -429,7 +493,7 @@ } ], "meta": { - "version": 3 + "version": 4 }, "net_colors": null, "netclass_assignments": null, @@ -440,14 +504,89 @@ "gencad": "", "idf": "", "netlist": "", + "plot": "", + "pos_files": "", "specctra_dsn": "", "step": "", + "svg": "", "vrml": "" }, "page_layout_descr_file": "" }, "schematic": { "annotate_start_num": 0, + "bom_export_filename": "${PROJECTNAME}.csv", + "bom_fmt_presets": [], + "bom_fmt_settings": { + "field_delimiter": ",", + "keep_line_breaks": false, + "keep_tabs": false, + "name": "CSV", + "ref_delimiter": ",", + "ref_range_delimiter": "", + "string_delimiter": "\"" + }, + "bom_presets": [], + "bom_settings": { + "exclude_dnp": false, + "fields_ordered": [ + { + "group_by": false, + "label": "Reference", + "name": "Reference", + "show": true + }, + { + "group_by": false, + "label": "Qty", + "name": "${QUANTITY}", + "show": true + }, + { + "group_by": true, + "label": "Value", + "name": "Value", + "show": true + }, + { + "group_by": true, + "label": "DNP", + "name": "${DNP}", + "show": true + }, + { + "group_by": true, + "label": "Exclude from BOM", + "name": "${EXCLUDE_FROM_BOM}", + "show": true + }, + { + "group_by": true, + "label": "Exclude from Board", + "name": "${EXCLUDE_FROM_BOARD}", + "show": true + }, + { + "group_by": true, + "label": "Footprint", + "name": "Footprint", + "show": true + }, + { + "group_by": false, + "label": "Datasheet", + "name": "Datasheet", + "show": true + } + ], + "filter_string": "", + "group_symbols": true, + "include_excluded_from_bom": true, + "name": "Default Editing", + "sort_asc": true, + "sort_field": "Reference" + }, + "connection_grid_size": 50.0, "drawing": { "dashed_lines_dash_length_ratio": 12.0, "dashed_lines_gap_length_ratio": 3.0, @@ -461,6 +600,11 @@ "intersheets_ref_suffix": "", "junction_size_choice": 3, "label_size_ratio": 0.375, + "operating_point_overlay_i_precision": 3, + "operating_point_overlay_i_range": "~A", + "operating_point_overlay_v_precision": 3, + "operating_point_overlay_v_range": "~V", + "overbar_offset_ratio": 1.23, "pin_symbol_size": 25.0, "text_offset_ratio": 0.15 }, @@ -472,10 +616,12 @@ "net_format_name": "", "page_layout_descr_file": "", "plot_directory": "", + "space_save_all_events": true, "spice_current_sheet_as_root": false, "spice_external_command": "spice \"%I\"", "spice_model_current_sheet_as_root": true, "spice_save_all_currents": false, + "spice_save_all_dissipations": false, "spice_save_all_voltages": false, "subpart_first_id": 65, "subpart_id_separator": 0 @@ -483,7 +629,7 @@ "sheets": [ [ "dde26cd9-6a98-439e-b5e9-17da5761ec2e", - "" + "Root" ] ], "text_variables": {} diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/mic_preamp_pcb_prototype_p2.kicad_pro.before-final-fix-2026-04-23 b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/mic_preamp_pcb_prototype_p2.kicad_pro.before-final-fix-2026-04-23 new file mode 100644 index 0000000..d5414f9 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/mic_preamp_pcb_prototype_p2.kicad_pro.before-final-fix-2026-04-23 @@ -0,0 +1,636 @@ +{ + "board": { + "3dviewports": [], + "design_settings": { + "defaults": { + "apply_defaults_to_fp_fields": false, + "apply_defaults_to_fp_shapes": false, + "apply_defaults_to_fp_text": false, + "board_outline_line_width": 0.1, + "copper_line_width": 0.2, + "copper_text_italic": false, + "copper_text_size_h": 1.5, + "copper_text_size_v": 1.5, + "copper_text_thickness": 0.3, + "copper_text_upright": false, + "courtyard_line_width": 0.05, + "dimension_precision": 4, + "dimension_units": 3, + "dimensions": { + "arrow_length": 1270000, + "extension_offset": 500000, + "keep_text_aligned": true, + "suppress_zeroes": false, + "text_position": 0, + "units_format": 1 + }, + "fab_line_width": 0.1, + "fab_text_italic": false, + "fab_text_size_h": 1.0, + "fab_text_size_v": 1.0, + "fab_text_thickness": 0.15, + "fab_text_upright": false, + "other_line_width": 0.15, + "other_text_italic": false, + "other_text_size_h": 1.0, + "other_text_size_v": 1.0, + "other_text_thickness": 0.15, + "other_text_upright": false, + "pads": { + "drill": 1.0, + "height": 2.0, + "width": 2.0 + }, + "silk_line_width": 0.15, + "silk_text_italic": false, + "silk_text_size_h": 1.0, + "silk_text_size_v": 1.0, + "silk_text_thickness": 0.15, + "silk_text_upright": false, + "zones": { + "min_clearance": 0.5 + } + }, + "diff_pair_dimensions": [ + { + "gap": 0.0, + "via_gap": 0.0, + "width": 0.0 + } + ], + "drc_exclusions": [], + "meta": { + "version": 2 + }, + "rule_severities": { + "annular_width": "error", + "clearance": "error", + "connection_width": "warning", + "copper_edge_clearance": "error", + "copper_sliver": "warning", + "courtyards_overlap": "error", + "creepage": "error", + "diff_pair_gap_out_of_range": "error", + "diff_pair_uncoupled_length_too_long": "error", + "drill_out_of_range": "error", + "duplicate_footprints": "warning", + "extra_footprint": "warning", + "footprint": "error", + "footprint_filters_mismatch": "ignore", + "footprint_symbol_mismatch": "warning", + "footprint_type_mismatch": "ignore", + "hole_clearance": "error", + "hole_near_hole": "error", + "hole_to_hole": "error", + "holes_co_located": "warning", + "invalid_outline": "error", + "isolated_copper": "warning", + "item_on_disabled_layer": "error", + "items_not_allowed": "error", + "length_out_of_range": "error", + "lib_footprint_issues": "warning", + "lib_footprint_mismatch": "warning", + "malformed_courtyard": "error", + "microvia_drill_out_of_range": "error", + "mirrored_text_on_front_layer": "warning", + "missing_courtyard": "ignore", + "missing_footprint": "warning", + "net_conflict": "warning", + "nonmirrored_text_on_back_layer": "warning", + "npth_inside_courtyard": "ignore", + "padstack": "warning", + "pth_inside_courtyard": "ignore", + "shorting_items": "error", + "silk_edge_clearance": "warning", + "silk_over_copper": "warning", + "silk_overlap": "warning", + "skew_out_of_range": "error", + "solder_mask_bridge": "error", + "starved_thermal": "error", + "text_height": "warning", + "text_on_edge_cuts": "error", + "text_thickness": "warning", + "through_hole_pad_without_hole": "error", + "too_many_vias": "error", + "track_angle": "error", + "track_dangling": "warning", + "track_segment_length": "error", + "track_width": "error", + "tracks_crossing": "error", + "unconnected_items": "error", + "unresolved_variable": "error", + "via_dangling": "warning", + "zones_intersect": "error" + }, + "rules": { + "max_error": 0.005, + "min_clearance": 0.0, + "min_connection": 0.0, + "min_copper_edge_clearance": 0.0, + "min_groove_width": 0.0, + "min_hole_clearance": 0.25, + "min_hole_to_hole": 0.25, + "min_microvia_diameter": 0.2, + "min_microvia_drill": 0.1, + "min_resolved_spokes": 2, + "min_silk_clearance": 0.0, + "min_text_height": 0.8, + "min_text_thickness": 0.08, + "min_through_hole_diameter": 0.3, + "min_track_width": 0.0, + "min_via_annular_width": 0.1, + "min_via_diameter": 0.5, + "solder_mask_clearance": 0.0, + "solder_mask_min_width": 0.0, + "solder_mask_to_copper_clearance": 0.0, + "use_height_for_length_calcs": true + }, + "teardrop_options": [ + { + "td_onpthpad": true, + "td_onroundshapesonly": false, + "td_onsmdpad": true, + "td_ontrackend": false, + "td_onvia": true + } + ], + "teardrop_parameters": [ + { + "td_allow_use_two_tracks": true, + "td_curve_segcount": 1, + "td_height_ratio": 1.0, + "td_length_ratio": 0.5, + "td_maxheight": 2.0, + "td_maxlen": 1.0, + "td_on_pad_in_zone": false, + "td_target_name": "td_round_shape", + "td_width_to_size_filter_ratio": 0.9 + }, + { + "td_allow_use_two_tracks": true, + "td_curve_segcount": 1, + "td_height_ratio": 1.0, + "td_length_ratio": 0.5, + "td_maxheight": 2.0, + "td_maxlen": 1.0, + "td_on_pad_in_zone": false, + "td_target_name": "td_rect_shape", + "td_width_to_size_filter_ratio": 0.9 + }, + { + "td_allow_use_two_tracks": true, + "td_curve_segcount": 1, + "td_height_ratio": 1.0, + "td_length_ratio": 0.5, + "td_maxheight": 2.0, + "td_maxlen": 1.0, + "td_on_pad_in_zone": false, + "td_target_name": "td_track_end", + "td_width_to_size_filter_ratio": 0.9 + } + ], + "track_widths": [ + 0.0 + ], + "tuning_pattern_settings": { + "diff_pair_defaults": { + "corner_radius_percentage": 80, + "corner_style": 1, + "max_amplitude": 1.0, + "min_amplitude": 0.2, + "single_sided": false, + "spacing": 1.0 + }, + "diff_pair_skew_defaults": { + "corner_radius_percentage": 80, + "corner_style": 1, + "max_amplitude": 1.0, + "min_amplitude": 0.2, + "single_sided": false, + "spacing": 0.6 + }, + "single_track_defaults": { + "corner_radius_percentage": 80, + "corner_style": 1, + "max_amplitude": 1.0, + "min_amplitude": 0.2, + "single_sided": false, + "spacing": 0.6 + } + }, + "via_dimensions": [ + { + "diameter": 0.0, + "drill": 0.0 + } + ], + "zones_allow_external_fillets": false + }, + "ipc2581": { + "dist": "", + "distpn": "", + "internal_id": "", + "mfg": "", + "mpn": "" + }, + "layer_pairs": [], + "layer_presets": [], + "viewports": [] + }, + "boards": [], + "cvpcb": { + "equivalence_files": [] + }, + "erc": { + "erc_exclusions": [], + "meta": { + "version": 0 + }, + "pin_map": [ + [ + 0, + 0, + 0, + 0, + 0, + 0, + 1, + 0, + 0, + 0, + 0, + 2 + ], + [ + 0, + 2, + 0, + 1, + 0, + 0, + 1, + 0, + 2, + 2, + 2, + 2 + ], + [ + 0, + 0, + 0, + 0, + 0, + 0, + 1, + 0, + 1, + 0, + 1, + 2 + ], + [ + 0, + 1, + 0, + 0, + 0, + 0, + 1, + 1, + 2, + 1, + 1, + 2 + ], + [ + 0, + 0, + 0, + 0, + 0, + 0, + 1, + 0, + 0, + 0, + 0, + 2 + ], + [ + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 2 + ], + [ + 1, + 1, + 1, + 1, + 1, + 0, + 1, + 1, + 1, + 1, + 1, + 2 + ], + [ + 0, + 0, + 0, + 1, + 0, + 0, + 1, + 0, + 0, + 0, + 0, + 2 + ], + [ + 0, + 2, + 1, + 2, + 0, + 0, + 1, + 0, + 2, + 2, + 2, + 2 + ], + [ + 0, + 2, + 0, + 1, + 0, + 0, + 1, + 0, + 2, + 0, + 0, + 2 + ], + [ + 0, + 2, + 1, + 1, + 0, + 0, + 1, + 0, + 2, + 0, + 0, + 2 + ], + [ + 2, + 2, + 2, + 2, + 2, + 2, + 2, + 2, + 2, + 2, + 2, + 2 + ] + ], + "rule_severities": { + "bus_definition_conflict": "error", + "bus_entry_needed": "error", + "bus_to_bus_conflict": "error", + "bus_to_net_conflict": "error", + "conflicting_netclasses": "error", + "different_unit_footprint": "error", + "different_unit_net": "error", + "duplicate_reference": "error", + "duplicate_sheet_names": "error", + "endpoint_off_grid": "warning", + "extra_units": "error", + "footprint_filter": "ignore", + "footprint_link_issues": "warning", + "four_way_junction": "ignore", + "global_label_dangling": "warning", + "hier_label_mismatch": "error", + "label_dangling": "error", + "label_multiple_wires": "warning", + "lib_symbol_issues": "warning", + "lib_symbol_mismatch": "warning", + "missing_bidi_pin": "warning", + "missing_input_pin": "warning", + "missing_power_pin": "error", + "missing_unit": "warning", + "multiple_net_names": "warning", + "net_not_bus_member": "warning", + "no_connect_connected": "warning", + "no_connect_dangling": "warning", + "pin_not_connected": "error", + "pin_not_driven": "error", + "pin_to_pin": "warning", + "power_pin_not_driven": "error", + "same_local_global_label": "warning", + "similar_label_and_power": "warning", + "similar_labels": "warning", + "similar_power": "warning", + "simulation_model_issue": "ignore", + "single_global_label": "ignore", + "unannotated": "error", + "unconnected_wire_endpoint": "warning", + "undefined_netclass": "error", + "unit_value_mismatch": "error", + "unresolved_variable": "error", + "wire_dangling": "error" + } + }, + "libraries": { + "pinned_footprint_libs": [], + "pinned_symbol_libs": [] + }, + "meta": { + "filename": "mic_preamp_pcb_prototype_p2.kicad_pro", + "version": 3 + }, + "net_settings": { + "classes": [ + { + "bus_width": 12, + "clearance": 0.2, + "diff_pair_gap": 0.25, + "diff_pair_via_gap": 0.25, + "diff_pair_width": 0.2, + "line_style": 0, + "microvia_diameter": 0.3, + "microvia_drill": 0.1, + "name": "Default", + "pcb_color": "rgba(0, 0, 0, 0.000)", + "priority": 2147483647, + "schematic_color": "rgba(0, 0, 0, 0.000)", + "track_width": 0.25, + "via_diameter": 0.8, + "via_drill": 0.4, + "wire_width": 6 + } + ], + "meta": { + "version": 4 + }, + "net_colors": null, + "netclass_assignments": null, + "netclass_patterns": [] + }, + "pcbnew": { + "last_paths": { + "gencad": "", + "idf": "", + "netlist": "", + "plot": "", + "pos_files": "", + "specctra_dsn": "", + "step": "", + "svg": "", + "vrml": "" + }, + "page_layout_descr_file": "" + }, + "schematic": { + "annotate_start_num": 0, + "bom_export_filename": "${PROJECTNAME}.csv", + "bom_fmt_presets": [], + "bom_fmt_settings": { + "field_delimiter": ",", + "keep_line_breaks": false, + "keep_tabs": false, + "name": "CSV", + "ref_delimiter": ",", + "ref_range_delimiter": "", + "string_delimiter": "\"" + }, + "bom_presets": [], + "bom_settings": { + "exclude_dnp": false, + "fields_ordered": [ + { + "group_by": false, + "label": "Reference", + "name": "Reference", + "show": true + }, + { + "group_by": false, + "label": "Qty", + "name": "${QUANTITY}", + "show": true + }, + { + "group_by": true, + "label": "Value", + "name": "Value", + "show": true + }, + { + "group_by": true, + "label": "DNP", + "name": "${DNP}", + "show": true + }, + { + "group_by": true, + "label": "Exclude from BOM", + "name": "${EXCLUDE_FROM_BOM}", + "show": true + }, + { + "group_by": true, + "label": "Exclude from Board", + "name": "${EXCLUDE_FROM_BOARD}", + "show": true + }, + { + "group_by": true, + "label": "Footprint", + "name": "Footprint", + "show": true + }, + { + "group_by": false, + "label": "Datasheet", + "name": "Datasheet", + "show": true + } + ], + "filter_string": "", + "group_symbols": true, + "include_excluded_from_bom": true, + "name": "Default Editing", + "sort_asc": true, + "sort_field": "Reference" + }, + "connection_grid_size": 50.0, + "drawing": { + "dashed_lines_dash_length_ratio": 12.0, + "dashed_lines_gap_length_ratio": 3.0, + "default_line_thickness": 6.0, + "default_text_size": 50.0, + "field_names": [], + "intersheets_ref_own_page": false, + "intersheets_ref_prefix": "", + "intersheets_ref_short": false, + "intersheets_ref_show": false, + "intersheets_ref_suffix": "", + "junction_size_choice": 3, + "label_size_ratio": 0.375, + "operating_point_overlay_i_precision": 3, + "operating_point_overlay_i_range": "~A", + "operating_point_overlay_v_precision": 3, + "operating_point_overlay_v_range": "~V", + "overbar_offset_ratio": 1.23, + "pin_symbol_size": 25.0, + "text_offset_ratio": 0.15 + }, + "legacy_lib_dir": "", + "legacy_lib_list": [], + "meta": { + "version": 1 + }, + "net_format_name": "", + "page_layout_descr_file": "", + "plot_directory": "", + "space_save_all_events": true, + "spice_current_sheet_as_root": false, + "spice_external_command": "spice \"%I\"", + "spice_model_current_sheet_as_root": true, + "spice_save_all_currents": false, + "spice_save_all_dissipations": false, + "spice_save_all_voltages": false, + "subpart_first_id": 65, + "subpart_id_separator": 0 + }, + "sheets": [ + [ + "dde26cd9-6a98-439e-b5e9-17da5761ec2e", + "Root" + ] + ], + "text_variables": {} +} diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/mic_preamp_pcb_prototype_p2.kicad_sch b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/mic_preamp_pcb_prototype_p2.kicad_sch index 6a6e1cb..6e53270 100644 --- a/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/mic_preamp_pcb_prototype_p2.kicad_sch +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/mic_preamp_pcb_prototype_p2.kicad_sch @@ -1,3381 +1 @@ -(kicad_sch (version 20230121) (generator eeschema) - - (uuid dde26cd9-6a98-439e-b5e9-17da5761ec2e) - - (paper "A4") - - (lib_symbols - (symbol "Connector:Conn_01x01_Pin" (pin_names (offset 1.016) hide) (in_bom yes) (on_board yes) - (property "Reference" "J" (at 0 2.54 0) - (effects (font (size 1.27 1.27))) - ) - (property "Value" "Conn_01x01_Pin" (at 0 -2.54 0) - (effects (font (size 1.27 1.27))) - ) - (property "Footprint" "" (at 0 0 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 0 0 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "ki_locked" "" (at 0 0 0) - (effects (font (size 1.27 1.27))) - ) - (property "ki_keywords" "connector" (at 0 0 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "ki_description" "Generic connector, single row, 01x01, script generated" (at 0 0 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "ki_fp_filters" "Connector*:*_1x??_*" (at 0 0 0) - (effects (font (size 1.27 1.27)) hide) - ) - (symbol "Conn_01x01_Pin_1_1" - (polyline - (pts - (xy 1.27 0) - (xy 0.8636 0) - ) - (stroke (width 0.1524) (type default)) - (fill (type none)) - ) - (rectangle (start 0.8636 0.127) (end 0 -0.127) - (stroke (width 0.1524) (type default)) - (fill (type outline)) - ) - (pin passive line (at 5.08 0 180) (length 3.81) - (name "Pin_1" (effects (font (size 1.27 1.27)))) - (number "1" (effects (font (size 1.27 1.27)))) - ) - ) - ) - (symbol "Connector_Generic:Conn_01x01" (pin_names (offset 1.016) hide) (in_bom yes) (on_board yes) - (property "Reference" "J" (at 0 2.54 0) - (effects (font (size 1.27 1.27))) - ) - (property "Value" "Conn_01x01" (at 0 -2.54 0) - (effects (font (size 1.27 1.27))) - ) - (property "Footprint" "" (at 0 0 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 0 0 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "ki_keywords" "connector" (at 0 0 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "ki_description" "Generic connector, single row, 01x01, script generated (kicad-library-utils/schlib/autogen/connector/)" (at 0 0 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "ki_fp_filters" "Connector*:*_1x??_*" (at 0 0 0) - (effects (font (size 1.27 1.27)) hide) - ) - (symbol "Conn_01x01_1_1" - (rectangle (start -1.27 0.127) (end 0 -0.127) - (stroke (width 0.1524) (type default)) - (fill (type none)) - ) - (rectangle (start -1.27 1.27) (end 1.27 -1.27) - (stroke (width 0.254) (type default)) - (fill (type background)) - ) - (pin passive line (at -5.08 0 0) (length 3.81) - (name "Pin_1" (effects (font (size 1.27 1.27)))) - (number "1" (effects (font (size 1.27 1.27)))) - ) - ) - ) - (symbol "Device:C" (pin_numbers hide) (pin_names (offset 0.254)) (in_bom yes) (on_board yes) - (property "Reference" "C" (at 0.635 2.54 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Value" "C" (at 0.635 -2.54 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Footprint" "" (at 0.9652 -3.81 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 0 0 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "ki_keywords" "cap capacitor" (at 0 0 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "ki_description" "Unpolarized capacitor" (at 0 0 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "ki_fp_filters" "C_*" (at 0 0 0) - (effects (font (size 1.27 1.27)) hide) - ) - (symbol "C_0_1" - (polyline - (pts - (xy -2.032 -0.762) - (xy 2.032 -0.762) - ) - (stroke (width 0.508) (type default)) - (fill (type none)) - ) - (polyline - (pts - (xy -2.032 0.762) - (xy 2.032 0.762) - ) - (stroke (width 0.508) (type default)) - (fill (type none)) - ) - ) - (symbol "C_1_1" - (pin passive line (at 0 3.81 270) (length 2.794) - (name "~" (effects (font (size 1.27 1.27)))) - (number "1" (effects (font (size 1.27 1.27)))) - ) - (pin passive line (at 0 -3.81 90) (length 2.794) - (name "~" (effects (font (size 1.27 1.27)))) - (number "2" (effects (font (size 1.27 1.27)))) - ) - ) - ) - (symbol "Device:C_Polarized" (pin_numbers hide) (pin_names (offset 0.254)) (in_bom yes) (on_board yes) - (property "Reference" "C" (at 0.635 2.54 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Value" "C_Polarized" (at 0.635 -2.54 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Footprint" "" (at 0.9652 -3.81 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 0 0 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "ki_keywords" "cap capacitor" (at 0 0 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "ki_description" "Polarized capacitor" (at 0 0 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "ki_fp_filters" "CP_*" (at 0 0 0) - (effects (font (size 1.27 1.27)) hide) - ) - (symbol "C_Polarized_0_1" - (rectangle (start -2.286 0.508) (end 2.286 1.016) - (stroke (width 0) (type default)) - (fill (type none)) - ) - (polyline - (pts - (xy -1.778 2.286) - (xy -0.762 2.286) - ) - (stroke (width 0) (type default)) - (fill (type none)) - ) - (polyline - (pts - (xy -1.27 2.794) - (xy -1.27 1.778) - ) - (stroke (width 0) (type default)) - (fill (type none)) - ) - (rectangle (start 2.286 -0.508) (end -2.286 -1.016) - (stroke (width 0) (type default)) - (fill (type outline)) - ) - ) - (symbol "C_Polarized_1_1" - (pin passive line (at 0 3.81 270) (length 2.794) - (name "~" (effects (font (size 1.27 1.27)))) - (number "1" (effects (font (size 1.27 1.27)))) - ) - (pin passive line (at 0 -3.81 90) (length 2.794) - (name "~" (effects (font (size 1.27 1.27)))) - (number "2" (effects (font (size 1.27 1.27)))) - ) - ) - ) - (symbol "Device:D" (pin_numbers hide) (pin_names (offset 1.016) hide) (in_bom yes) (on_board yes) - (property "Reference" "D" (at 0 2.54 0) - (effects (font (size 1.27 1.27))) - ) - (property "Value" "D" (at 0 -2.54 0) - (effects (font (size 1.27 1.27))) - ) - (property "Footprint" "" (at 0 0 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 0 0 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Sim.Device" "D" (at 0 0 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Sim.Pins" "1=K 2=A" (at 0 0 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "ki_keywords" "diode" (at 0 0 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "ki_description" "Diode" (at 0 0 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "ki_fp_filters" "TO-???* *_Diode_* *SingleDiode* D_*" (at 0 0 0) - (effects (font (size 1.27 1.27)) hide) - ) - (symbol "D_0_1" - (polyline - (pts - (xy -1.27 1.27) - (xy -1.27 -1.27) - ) - (stroke (width 0.254) (type default)) - (fill (type none)) - ) - (polyline - (pts - (xy 1.27 0) - (xy -1.27 0) - ) - (stroke (width 0) (type default)) - (fill (type none)) - ) - (polyline - (pts - (xy 1.27 1.27) - (xy 1.27 -1.27) - (xy -1.27 0) - (xy 1.27 1.27) - ) - (stroke (width 0.254) (type default)) - (fill (type none)) - ) - ) - (symbol "D_1_1" - (pin passive line (at -3.81 0 0) (length 2.54) - (name "K" (effects (font (size 1.27 1.27)))) - (number "1" (effects (font (size 1.27 1.27)))) - ) - (pin passive line (at 3.81 0 180) (length 2.54) - (name "A" (effects (font (size 1.27 1.27)))) - (number "2" (effects (font (size 1.27 1.27)))) - ) - ) - ) - (symbol "Device:R" (pin_numbers hide) (pin_names (offset 0)) (in_bom yes) (on_board yes) - (property "Reference" "R" (at 2.032 0 90) - (effects (font (size 1.27 1.27))) - ) - (property "Value" "R" (at 0 0 90) - (effects (font (size 1.27 1.27))) - ) - (property "Footprint" "" (at -1.778 0 90) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 0 0 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "ki_keywords" "R res resistor" (at 0 0 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "ki_description" "Resistor" (at 0 0 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "ki_fp_filters" "R_*" (at 0 0 0) - (effects (font (size 1.27 1.27)) hide) - ) - (symbol "R_0_1" - (rectangle (start -1.016 -2.54) (end 1.016 2.54) - (stroke (width 0.254) (type default)) - (fill (type none)) - ) - ) - (symbol "R_1_1" - (pin passive line (at 0 3.81 270) (length 1.27) - (name "~" (effects (font (size 1.27 1.27)))) - (number "1" (effects (font (size 1.27 1.27)))) - ) - (pin passive line (at 0 -3.81 90) (length 1.27) - (name "~" (effects (font (size 1.27 1.27)))) - (number "2" (effects (font (size 1.27 1.27)))) - ) - ) - ) - (symbol "OPA1642AID:OPA1642AID" (pin_names (offset 1.016)) (in_bom yes) (on_board yes) - (property "Reference" "U" (at 2.54 3.175 0) - (effects (font (size 1.27 1.27)) (justify left bottom)) - ) - (property "Value" "OPA1642AID" (at 2.54 -5.08 0) - (effects (font (size 1.27 1.27)) (justify left bottom)) - ) - (property "Footprint" "OPA1642AID:SOIC127P599X175-8N" (at 0 0 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "Datasheet" "" (at 0 0 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "MF" "Texas Instruments" (at 0 0 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "MAXIMUM_PACKAGE_HEIGHT" "1.75 mm" (at 0 0 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "Package" "SOIC-8 Texas Instruments" (at 0 0 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "Price" "None" (at 0 0 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "Check_prices" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=eda" (at 0 0 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "STANDARD" "IPC 7351B" (at 0 0 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "PARTREV" "D" (at 0 0 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "SnapEDA_Link" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=snap" (at 0 0 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "MP" "OPA1642AID" (at 0 0 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "Description" "\n \n Dual SoundPlus™ high-performance, JFET-input audio op amp\n \n" (at 0 0 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "Availability" "In Stock" (at 0 0 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "MANUFACTURER" "Texas Instruments" (at 0 0 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (symbol "OPA1642AID_1_0" - (polyline - (pts - (xy -5.08 -5.08) - (xy 5.08 0) - ) - (stroke (width 0.4064) (type default)) - (fill (type none)) - ) - (polyline - (pts - (xy -5.08 5.08) - (xy -5.08 -5.08) - ) - (stroke (width 0.4064) (type default)) - (fill (type none)) - ) - (polyline - (pts - (xy -4.445 -2.54) - (xy -3.175 -2.54) - ) - (stroke (width 0.1524) (type default)) - (fill (type none)) - ) - (polyline - (pts - (xy -4.445 2.54) - (xy -3.175 2.54) - ) - (stroke (width 0.1524) (type default)) - (fill (type none)) - ) - (polyline - (pts - (xy -3.81 -1.905) - (xy -3.81 -3.175) - ) - (stroke (width 0.1524) (type default)) - (fill (type none)) - ) - (polyline - (pts - (xy 5.08 0) - (xy -5.08 5.08) - ) - (stroke (width 0.4064) (type default)) - (fill (type none)) - ) - (text "V+" (at 1.27 3.175 900) - (effects (font (size 0.8128 0.8128)) (justify left bottom)) - ) - (text "V-" (at 1.27 -4.826 900) - (effects (font (size 0.8128 0.8128)) (justify left bottom)) - ) - (pin output line (at 10.16 0 180) (length 5.08) - (name "~" (effects (font (size 1.016 1.016)))) - (number "1" (effects (font (size 1.016 1.016)))) - ) - (pin input line (at -10.16 2.54 0) (length 5.08) - (name "~" (effects (font (size 1.016 1.016)))) - (number "2" (effects (font (size 1.016 1.016)))) - ) - (pin input line (at -10.16 -2.54 0) (length 5.08) - (name "~" (effects (font (size 1.016 1.016)))) - (number "3" (effects (font (size 1.016 1.016)))) - ) - (pin power_in line (at 0 -7.62 90) (length 5.08) - (name "~" (effects (font (size 1.016 1.016)))) - (number "4" (effects (font (size 1.016 1.016)))) - ) - (pin power_in line (at 0 7.62 270) (length 5.08) - (name "~" (effects (font (size 1.016 1.016)))) - (number "8" (effects (font (size 1.016 1.016)))) - ) - ) - (symbol "OPA1642AID_2_0" - (polyline - (pts - (xy -5.08 -5.08) - (xy 5.08 0) - ) - (stroke (width 0.4064) (type default)) - (fill (type none)) - ) - (polyline - (pts - (xy -5.08 5.08) - (xy -5.08 -5.08) - ) - (stroke (width 0.4064) (type default)) - (fill (type none)) - ) - (polyline - (pts - (xy -4.445 -2.54) - (xy -3.175 -2.54) - ) - (stroke (width 0.1524) (type default)) - (fill (type none)) - ) - (polyline - (pts - (xy -4.445 2.54) - (xy -3.175 2.54) - ) - (stroke (width 0.1524) (type default)) - (fill (type none)) - ) - (polyline - (pts - (xy -3.81 -1.905) - (xy -3.81 -3.175) - ) - (stroke (width 0.1524) (type default)) - (fill (type none)) - ) - (polyline - (pts - (xy 5.08 0) - (xy -5.08 5.08) - ) - (stroke (width 0.4064) (type default)) - (fill (type none)) - ) - (pin input line (at -10.16 -2.54 0) (length 5.08) - (name "~" (effects (font (size 1.016 1.016)))) - (number "5" (effects (font (size 1.016 1.016)))) - ) - (pin input line (at -10.16 2.54 0) (length 5.08) - (name "~" (effects (font (size 1.016 1.016)))) - (number "6" (effects (font (size 1.016 1.016)))) - ) - (pin output line (at 10.16 0 180) (length 5.08) - (name "~" (effects (font (size 1.016 1.016)))) - (number "7" (effects (font (size 1.016 1.016)))) - ) - ) - ) - (symbol "power:Earth" (power) (pin_names (offset 0)) (in_bom yes) (on_board yes) - (property "Reference" "#PWR" (at 0 -6.35 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Value" "Earth" (at 0 -3.81 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Footprint" "" (at 0 0 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 0 0 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "ki_keywords" "global ground gnd" (at 0 0 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "ki_description" "Power symbol creates a global label with name \"Earth\"" (at 0 0 0) - (effects (font (size 1.27 1.27)) hide) - ) - (symbol "Earth_0_1" - (polyline - (pts - (xy -0.635 -1.905) - (xy 0.635 -1.905) - ) - (stroke (width 0) (type default)) - (fill (type none)) - ) - (polyline - (pts - (xy -0.127 -2.54) - (xy 0.127 -2.54) - ) - (stroke (width 0) (type default)) - (fill (type none)) - ) - (polyline - (pts - (xy 0 -1.27) - (xy 0 0) - ) - (stroke (width 0) (type default)) - (fill (type none)) - ) - (polyline - (pts - (xy 1.27 -1.27) - (xy -1.27 -1.27) - ) - (stroke (width 0) (type default)) - (fill (type none)) - ) - ) - (symbol "Earth_1_1" - (pin power_in line (at 0 0 270) (length 0) hide - (name "Earth" (effects (font (size 1.27 1.27)))) - (number "1" (effects (font (size 1.27 1.27)))) - ) - ) - ) - (symbol "power:GND" (power) (pin_names (offset 0)) (in_bom yes) (on_board yes) - (property "Reference" "#PWR" (at 0 -6.35 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Value" "GND" (at 0 -3.81 0) - (effects (font (size 1.27 1.27))) - ) - (property "Footprint" "" (at 0 0 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "" (at 0 0 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "ki_keywords" "global power" (at 0 0 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "ki_description" "Power symbol creates a global label with name \"GND\" , ground" (at 0 0 0) - (effects (font (size 1.27 1.27)) hide) - ) - (symbol "GND_0_1" - (polyline - (pts - (xy 0 0) - (xy 0 -1.27) - (xy 1.27 -1.27) - (xy 0 -2.54) - (xy -1.27 -1.27) - (xy 0 -1.27) - ) - (stroke (width 0) (type default)) - (fill (type none)) - ) - ) - (symbol "GND_1_1" - (pin power_in line (at 0 0 270) (length 0) hide - (name "GND" (effects (font (size 1.27 1.27)))) - (number "1" (effects (font (size 1.27 1.27)))) - ) - ) - ) - ) - - (junction (at 176.53 33.02) (diameter 0) (color 0 0 0 0) - (uuid 00589357-8e78-4b48-ae28-55a325e7e60d) - ) - (junction (at 57.15 34.29) (diameter 0) (color 0 0 0 0) - (uuid 09588201-8b42-44b7-819e-c8f5ab4dc089) - ) - (junction (at 64.77 34.29) (diameter 0) (color 0 0 0 0) - (uuid 16b0b64c-300f-48e4-b5e3-6530295f7432) - ) - (junction (at 110.49 45.72) (diameter 0) (color 0 0 0 0) - (uuid 1fedaa26-68d8-43e0-9f71-7347c3987ea2) - ) - (junction (at 105.41 67.31) (diameter 0) (color 0 0 0 0) - (uuid 2197faeb-7074-4b3f-b0ae-c0c6950c6115) - ) - (junction (at 182.88 33.02) (diameter 0) (color 0 0 0 0) - (uuid 22226dcb-761d-4e21-8926-5e3e670d73b4) - ) - (junction (at 190.5 33.02) (diameter 0) (color 0 0 0 0) - (uuid 2b758264-7c69-4e0c-93be-2efbcb50a2c0) - ) - (junction (at 92.71 91.44) (diameter 0) (color 0 0 0 0) - (uuid 2e7b2632-ec2f-4541-8baa-fe7738ac00ce) - ) - (junction (at 130.81 102.87) (diameter 0) (color 0 0 0 0) - (uuid 31a0fa79-136a-44fe-886c-461ed761bcd9) - ) - (junction (at 246.38 44.45) (diameter 0) (color 0 0 0 0) - (uuid 34017a92-c9bf-47c6-82c9-f179df22de8e) - ) - (junction (at 69.85 48.26) (diameter 0) (color 0 0 0 0) - (uuid 3a063535-13d8-4452-8527-87ecc8b8bafd) - ) - (junction (at 218.44 90.17) (diameter 0) (color 0 0 0 0) - (uuid 506c6fe0-54fc-4644-b472-af2712a66982) - ) - (junction (at 50.8 34.29) (diameter 0) (color 0 0 0 0) - (uuid 52d16d23-5d99-4997-9606-6a432c5ed42c) - ) - (junction (at 110.49 91.44) (diameter 0) (color 0 0 0 0) - (uuid 6e7975c6-e34f-49fe-8979-b54dde5b3afa) - ) - (junction (at 135.89 45.72) (diameter 0) (color 0 0 0 0) - (uuid 7143fe68-cd97-4817-ad2c-119aed5e1e98) - ) - (junction (at 219.71 96.52) (diameter 0) (color 0 0 0 0) - (uuid 72610660-92b2-4c67-9420-a83a3b6c5fe8) - ) - (junction (at 160.02 63.5) (diameter 0) (color 0 0 0 0) - (uuid 7c17383d-56a7-44e5-a84d-f9087e67706a) - ) - (junction (at 254 44.45) (diameter 0) (color 0 0 0 0) - (uuid 8b6bfe60-3dc6-4264-96f7-e3717e7adb54) - ) - (junction (at 250.19 101.6) (diameter 0) (color 0 0 0 0) - (uuid 8c585ad5-91e8-4583-b2d8-0474483941bd) - ) - (junction (at 130.81 134.62) (diameter 0) (color 0 0 0 0) - (uuid 9028dbdb-828c-44c9-8913-4012ea279758) - ) - (junction (at 128.27 102.87) (diameter 0) (color 0 0 0 0) - (uuid 94ec2774-6ecc-4c4c-8ff7-25af5bc253b2) - ) - (junction (at 254 101.6) (diameter 0) (color 0 0 0 0) - (uuid 96a9a85d-09cd-4d8c-a932-99a3f6e299fa) - ) - (junction (at 261.62 44.45) (diameter 0) (color 0 0 0 0) - (uuid 9e1c806d-87fc-406a-a639-bcaeb441f29f) - ) - (junction (at 190.5 46.99) (diameter 0) (color 0 0 0 0) - (uuid a2e2e3ef-4659-4007-b817-ded43a82b6ad) - ) - (junction (at 231.14 44.45) (diameter 0) (color 0 0 0 0) - (uuid a7f346ae-f212-4dac-bed0-b846ad63e47e) - ) - (junction (at 105.41 45.72) (diameter 0) (color 0 0 0 0) - (uuid ac48b7f1-5297-4449-ba90-97fe45c07c15) - ) - (junction (at 231.14 66.04) (diameter 0) (color 0 0 0 0) - (uuid b77b5e27-f925-4c66-b4ba-d614a7032f1a) - ) - (junction (at 171.45 33.02) (diameter 0) (color 0 0 0 0) - (uuid bb063fe2-6534-4b28-99e0-da8d833215b1) - ) - (junction (at 64.77 48.26) (diameter 0) (color 0 0 0 0) - (uuid be418af7-2d0e-41ac-a848-fa5787a5fcd0) - ) - (junction (at 45.72 34.29) (diameter 0) (color 0 0 0 0) - (uuid c31e8219-696e-409a-8d87-dadc8b1a0d37) - ) - (junction (at 93.98 97.79) (diameter 0) (color 0 0 0 0) - (uuid c5697ae5-e8d7-4567-96b2-c46c35186d3b) - ) - (junction (at 195.58 46.99) (diameter 0) (color 0 0 0 0) - (uuid d20ebbb5-9e1b-439e-9109-a96a9c0da384) - ) - (junction (at 128.27 45.72) (diameter 0) (color 0 0 0 0) - (uuid d3939fce-7f5c-4b01-af8c-43fdf06aa9b4) - ) - (junction (at 236.22 44.45) (diameter 0) (color 0 0 0 0) - (uuid e1d9b8d6-2f6b-46b2-a5d7-a46c5f27b3ba) - ) - (junction (at 34.29 64.77) (diameter 0) (color 0 0 0 0) - (uuid e991ca0a-385e-45f3-b8db-5c612be6f19d) - ) - (junction (at 236.22 90.17) (diameter 0) (color 0 0 0 0) - (uuid eaa05d34-930c-4892-b0e5-6ea6106cf656) - ) - (junction (at 120.65 45.72) (diameter 0) (color 0 0 0 0) - (uuid f4b65052-dac7-4f36-bf7c-48aa76d3179f) - ) - (junction (at 194.31 81.28) (diameter 0) (color 0 0 0 0) - (uuid fb68e80d-0477-432b-9927-a247553d8d2d) - ) - (junction (at 68.58 82.55) (diameter 0) (color 0 0 0 0) - (uuid ffa8159e-09d6-41df-8412-f708e67ac562) - ) - - (wire (pts (xy 132.08 92.71) (xy 133.35 92.71)) - (stroke (width 0) (type default)) - (uuid 02ffd185-3759-49b3-8c77-2e0613d4dfc1) - ) - (wire (pts (xy 133.35 67.31) (xy 125.73 67.31)) - (stroke (width 0) (type default)) - (uuid 0356e5f5-98e0-41ac-986a-3a5c50e15865) - ) - (wire (pts (xy 171.45 73.66) (xy 171.45 74.93)) - (stroke (width 0) (type default)) - (uuid 04fa697f-ba4f-4896-9ec8-bc29f296ab27) - ) - (wire (pts (xy 261.62 45.72) (xy 261.62 44.45)) - (stroke (width 0) (type default)) - (uuid 054de042-36c6-466d-addf-52404f9a5cf5) - ) - (wire (pts (xy 132.08 91.44) (xy 125.73 91.44)) - (stroke (width 0) (type default)) - (uuid 07f957aa-8cbd-46c5-b269-0dd7732ae0b0) - ) - (wire (pts (xy 86.36 82.55) (xy 92.71 82.55)) - (stroke (width 0) (type default)) - (uuid 091a8572-79a5-4536-b85d-bab77e5807f6) - ) - (wire (pts (xy 196.85 92.71) (xy 194.31 92.71)) - (stroke (width 0) (type default)) - (uuid 0948c5ac-1f77-48ec-94a4-0f80cc03c66a) - ) - (wire (pts (xy 64.77 36.83) (xy 64.77 34.29)) - (stroke (width 0) (type default)) - (uuid 09bff6a2-4405-4b1c-b1c7-8770f1b83251) - ) - (wire (pts (xy 110.49 54.61) (xy 110.49 91.44)) - (stroke (width 0) (type default)) - (uuid 0a92ccac-a9ba-41ec-9130-6efa152b8c7c) - ) - (wire (pts (xy 120.65 45.72) (xy 128.27 45.72)) - (stroke (width 0) (type default)) - (uuid 0c093a6d-daaf-49d0-915e-5c6ba985c32f) - ) - (wire (pts (xy 71.12 93.98) (xy 68.58 93.98)) - (stroke (width 0) (type default)) - (uuid 0c103657-0555-49c9-8325-2766ddb6c34f) - ) - (wire (pts (xy 254 101.6) (xy 254 102.87)) - (stroke (width 0) (type default)) - (uuid 0c5e5cac-35ca-4a13-9be1-b006870f52be) - ) - (wire (pts (xy 182.88 41.91) (xy 182.88 43.18)) - (stroke (width 0) (type default)) - (uuid 0cce7c82-3eb4-4b62-871a-55f7b76e03fa) - ) - (wire (pts (xy 30.48 67.31) (xy 33.02 67.31)) - (stroke (width 0) (type default)) - (uuid 0d2f807f-742b-4768-94ba-95a2e0dbb27e) - ) - (wire (pts (xy 194.31 92.71) (xy 194.31 81.28)) - (stroke (width 0) (type default)) - (uuid 0dcc1259-f63a-4cdb-8738-f5795f1b3254) - ) - (wire (pts (xy 160.02 49.53) (xy 160.02 46.99)) - (stroke (width 0) (type default)) - (uuid 0e08d303-8030-47a4-80b3-c8e23305f124) - ) - (wire (pts (xy 135.89 68.58) (xy 135.89 121.92)) - (stroke (width 0) (type default)) - (uuid 0ecd9114-c5f3-41b1-bbaf-d0bf23bf8c72) - ) - (wire (pts (xy 69.85 88.9) (xy 69.85 48.26)) - (stroke (width 0) (type default)) - (uuid 0f14fdbd-45c6-4587-9179-a25b05c2e830) - ) - (wire (pts (xy 110.49 46.99) (xy 110.49 45.72)) - (stroke (width 0) (type default)) - (uuid 12318da3-5c3c-4ee8-be25-587a325bb671) - ) - (wire (pts (xy 130.81 102.87) (xy 130.81 134.62)) - (stroke (width 0) (type default)) - (uuid 14914217-99a2-4d1d-a175-3837138c9f9d) - ) - (wire (pts (xy 190.5 43.18) (xy 190.5 46.99)) - (stroke (width 0) (type default)) - (uuid 149d755e-650f-464a-b013-2877ffe94d53) - ) - (wire (pts (xy 167.64 33.02) (xy 167.64 34.29)) - (stroke (width 0) (type default)) - (uuid 1612cd4b-7389-451b-b032-7c60262b86ba) - ) - (wire (pts (xy 158.75 96.52) (xy 158.75 66.04)) - (stroke (width 0) (type default)) - (uuid 17c7e460-170d-43ec-9eda-22024b3b9d49) - ) - (wire (pts (xy 35.56 69.85) (xy 34.29 69.85)) - (stroke (width 0) (type default)) - (uuid 1910092b-7ffc-4db7-bd95-7f862afcc95a) - ) - (wire (pts (xy 64.77 44.45) (xy 64.77 48.26)) - (stroke (width 0) (type default)) - (uuid 19585c84-7781-4da6-b4c5-c2bb13cc74af) - ) - (wire (pts (xy 34.29 64.77) (xy 35.56 64.77)) - (stroke (width 0) (type default)) - (uuid 1a7dbebb-ec04-47d8-bb6f-a2411e559e67) - ) - (wire (pts (xy 95.25 67.31) (xy 55.88 67.31)) - (stroke (width 0) (type default)) - (uuid 1aa930ab-dc21-4937-8ecb-8e83e978bda0) - ) - (wire (pts (xy 161.29 68.58) (xy 160.02 68.58)) - (stroke (width 0) (type default)) - (uuid 1b40b0b7-7380-48ed-9812-f23bddb9be2a) - ) - (wire (pts (xy 195.58 46.99) (xy 219.71 46.99)) - (stroke (width 0) (type default)) - (uuid 1eba57e1-ae3d-47e1-9db3-7eb057abc06d) - ) - (wire (pts (xy 93.98 48.26) (xy 93.98 49.53)) - (stroke (width 0) (type default)) - (uuid 1f841559-9f10-4f15-a62a-5f8e9b558097) - ) - (wire (pts (xy 30.48 64.77) (xy 34.29 64.77)) - (stroke (width 0) (type default)) - (uuid 1f90ebaf-5381-4215-87a7-0678b5409152) - ) - (wire (pts (xy 220.98 66.04) (xy 181.61 66.04)) - (stroke (width 0) (type default)) - (uuid 20e1f14e-246f-408b-9bc9-45a3480af913) - ) - (wire (pts (xy 246.38 44.45) (xy 254 44.45)) - (stroke (width 0) (type default)) - (uuid 22cb0afe-5c07-4150-8264-9d54a11f4480) - ) - (wire (pts (xy 45.72 34.29) (xy 41.91 34.29)) - (stroke (width 0) (type default)) - (uuid 2373e140-4aee-4605-bb6d-a1aa0003ca85) - ) - (wire (pts (xy 92.71 82.55) (xy 92.71 91.44)) - (stroke (width 0) (type default)) - (uuid 2387ac61-6080-40df-9809-adfa32c9436d) - ) - (wire (pts (xy 267.97 45.72) (xy 267.97 44.45)) - (stroke (width 0) (type default)) - (uuid 24a76783-3bad-4ee9-aefe-a83c1207056d) - ) - (wire (pts (xy 130.81 134.62) (xy 130.81 135.89)) - (stroke (width 0) (type default)) - (uuid 2640e604-e51f-4854-b146-214b7487dbf8) - ) - (wire (pts (xy 245.11 101.6) (xy 250.19 101.6)) - (stroke (width 0) (type default)) - (uuid 2995443d-90a6-43a8-a5f9-059384375554) - ) - (wire (pts (xy 64.77 48.26) (xy 64.77 49.53)) - (stroke (width 0) (type default)) - (uuid 2a885e5e-7d91-4b49-82e4-0cb3564efb77) - ) - (wire (pts (xy 105.41 67.31) (xy 118.11 67.31)) - (stroke (width 0) (type default)) - (uuid 2b091d4b-29fd-474e-baf6-eb6d449ae010) - ) - (wire (pts (xy 231.14 43.18) (xy 231.14 44.45)) - (stroke (width 0) (type default)) - (uuid 2b42269e-c0f6-4ee1-a79a-ed49f1b423bc) - ) - (wire (pts (xy 261.62 44.45) (xy 254 44.45)) - (stroke (width 0) (type default)) - (uuid 2e57848c-6b0d-4203-afc5-11e7b17d4656) - ) - (wire (pts (xy 231.14 66.04) (xy 243.84 66.04)) - (stroke (width 0) (type default)) - (uuid 2f88aafa-1904-4b74-8678-eaf51e21ff15) - ) - (wire (pts (xy 110.49 45.72) (xy 120.65 45.72)) - (stroke (width 0) (type default)) - (uuid 307b7763-560b-4081-a5b0-4d9432cf7c90) - ) - (wire (pts (xy 142.24 46.99) (xy 142.24 45.72)) - (stroke (width 0) (type default)) - (uuid 3258f2e1-c35e-4c31-b4e2-df37c4b55397) - ) - (wire (pts (xy 92.71 91.44) (xy 95.25 91.44)) - (stroke (width 0) (type default)) - (uuid 33dc630f-6894-453f-ba6d-227a76c7dfb7) - ) - (wire (pts (xy 105.41 54.61) (xy 105.41 67.31)) - (stroke (width 0) (type default)) - (uuid 343dcd1d-c956-4e75-b567-a0342845ebaf) - ) - (wire (pts (xy 34.29 82.55) (xy 49.53 82.55)) - (stroke (width 0) (type default)) - (uuid 34a62c88-aad7-4f05-a14e-a8e2c2e7aa8c) - ) - (wire (pts (xy 133.35 92.71) (xy 133.35 121.92)) - (stroke (width 0) (type default)) - (uuid 3502f113-0881-4463-86a6-57a628a4d65c) - ) - (wire (pts (xy 171.45 33.02) (xy 167.64 33.02)) - (stroke (width 0) (type default)) - (uuid 36b94fa8-f95c-4830-b262-b1f0930cdfec) - ) - (wire (pts (xy 105.41 34.29) (xy 105.41 36.83)) - (stroke (width 0) (type default)) - (uuid 3f2a71ad-7543-4d78-ace7-ec7c6a72ede5) - ) - (wire (pts (xy 250.19 101.6) (xy 254 101.6)) - (stroke (width 0) (type default)) - (uuid 3fec9f90-1e3f-4ac1-af8d-3c01828ca098) - ) - (wire (pts (xy 142.24 45.72) (xy 135.89 45.72)) - (stroke (width 0) (type default)) - (uuid 44f75a8f-3922-464d-a9cb-247c27a22aaf) - ) - (wire (pts (xy 246.38 53.34) (xy 246.38 54.61)) - (stroke (width 0) (type default)) - (uuid 46b0c5b1-32e8-4b1f-a59f-9361200bbe71) - ) - (wire (pts (xy 231.14 33.02) (xy 231.14 35.56)) - (stroke (width 0) (type default)) - (uuid 46f7a7ce-f6f7-434e-adda-6d0b3c9625db) - ) - (wire (pts (xy 190.5 46.99) (xy 195.58 46.99)) - (stroke (width 0) (type default)) - (uuid 4ba3aedf-1589-47c6-9ebb-e7f82290d39d) - ) - (wire (pts (xy 195.58 87.63) (xy 195.58 46.99)) - (stroke (width 0) (type default)) - (uuid 4c8dd0ec-3ab0-447a-baad-4b8912ad9086) - ) - (wire (pts (xy 160.02 46.99) (xy 190.5 46.99)) - (stroke (width 0) (type default)) - (uuid 4ce29b5f-6b0d-4784-a4b4-2367ea534650) - ) - (wire (pts (xy 182.88 81.28) (xy 194.31 81.28)) - (stroke (width 0) (type default)) - (uuid 4e5e987c-6db3-4385-bfef-de2b0082abf6) - ) - (wire (pts (xy 257.81 90.17) (xy 251.46 90.17)) - (stroke (width 0) (type default)) - (uuid 4ee2dd63-ff0d-448c-985c-512662b0677e) - ) - (wire (pts (xy 128.27 46.99) (xy 128.27 45.72)) - (stroke (width 0) (type default)) - (uuid 5094e56d-01bf-4fbe-9ab6-6e2261a6778c) - ) - (wire (pts (xy 171.45 33.02) (xy 171.45 58.42)) - (stroke (width 0) (type default)) - (uuid 50c5c928-9226-4ccd-86c8-f441f4c823c0) - ) - (wire (pts (xy 110.49 91.44) (xy 118.11 91.44)) - (stroke (width 0) (type default)) - (uuid 50d74203-3acf-48ab-9ab4-9cd967bb8eda) - ) - (wire (pts (xy 176.53 33.02) (xy 182.88 33.02)) - (stroke (width 0) (type default)) - (uuid 5282bfdc-ba1d-49f1-bd41-c878cb71e66f) - ) - (wire (pts (xy 218.44 90.17) (xy 220.98 90.17)) - (stroke (width 0) (type default)) - (uuid 52d0ae17-05e5-427e-9a4e-f688b490a3d6) - ) - (wire (pts (xy 34.29 50.8) (xy 34.29 48.26)) - (stroke (width 0) (type default)) - (uuid 54716c51-f35b-4e7a-b401-b965c48846e9) - ) - (wire (pts (xy 120.65 54.61) (xy 120.65 55.88)) - (stroke (width 0) (type default)) - (uuid 5651c2dd-828f-4db3-b5f0-c2517dfad025) - ) - (wire (pts (xy 195.58 87.63) (xy 196.85 87.63)) - (stroke (width 0) (type default)) - (uuid 568335cf-e2ea-411d-97a3-ee936bfa35fd) - ) - (wire (pts (xy 93.98 97.79) (xy 130.81 97.79)) - (stroke (width 0) (type default)) - (uuid 56cfe013-4549-4aed-b51f-fd23cdd4317e) - ) - (wire (pts (xy 254 45.72) (xy 254 44.45)) - (stroke (width 0) (type default)) - (uuid 57534347-04b0-4ede-a7f5-b7f0614f969c) - ) - (wire (pts (xy 212.09 81.28) (xy 218.44 81.28)) - (stroke (width 0) (type default)) - (uuid 588917aa-2b57-4704-8692-b6cbddae4b93) - ) - (wire (pts (xy 228.6 66.04) (xy 231.14 66.04)) - (stroke (width 0) (type default)) - (uuid 5d9b100c-15eb-49b8-99fa-5122b7a9e260) - ) - (wire (pts (xy 236.22 90.17) (xy 243.84 90.17)) - (stroke (width 0) (type default)) - (uuid 5f3db4a8-9552-4076-91b7-c376c4b9dfd0) - ) - (wire (pts (xy 254 101.6) (xy 256.54 101.6)) - (stroke (width 0) (type default)) - (uuid 5f97aa97-7bab-43ce-a33c-31d0b7be2ec8) - ) - (wire (pts (xy 45.72 74.93) (xy 45.72 76.2)) - (stroke (width 0) (type default)) - (uuid 5fd5e64a-f9a8-4402-851f-a357c91335b0) - ) - (wire (pts (xy 256.54 101.6) (xy 256.54 96.52)) - (stroke (width 0) (type default)) - (uuid 602aee30-db48-4e11-afcd-c2ca5b2c774f) - ) - (wire (pts (xy 133.35 68.58) (xy 135.89 68.58)) - (stroke (width 0) (type default)) - (uuid 6250034d-badf-4beb-89bb-bd15b05aa371) - ) - (wire (pts (xy 68.58 93.98) (xy 68.58 82.55)) - (stroke (width 0) (type default)) - (uuid 642834c3-92d1-4978-a38c-9c0073735e66) - ) - (wire (pts (xy 105.41 44.45) (xy 105.41 45.72)) - (stroke (width 0) (type default)) - (uuid 64a24b07-8240-46c3-904a-a58b493a9ac6) - ) - (wire (pts (xy 261.62 53.34) (xy 261.62 54.61)) - (stroke (width 0) (type default)) - (uuid 6ecf933a-4006-4cef-a646-a8bc4b3ee0e1) - ) - (wire (pts (xy 182.88 33.02) (xy 190.5 33.02)) - (stroke (width 0) (type default)) - (uuid 710d1197-a691-45c2-9b2f-d9677797cef6) - ) - (wire (pts (xy 194.31 81.28) (xy 204.47 81.28)) - (stroke (width 0) (type default)) - (uuid 7214982d-e78f-4016-8929-772d89d4255a) - ) - (wire (pts (xy 218.44 81.28) (xy 218.44 90.17)) - (stroke (width 0) (type default)) - (uuid 723939a1-81a1-432a-b494-0491488c41c2) - ) - (wire (pts (xy 245.11 134.62) (xy 130.81 134.62)) - (stroke (width 0) (type default)) - (uuid 73e6a103-d702-4daa-848a-3d8cb790ca5b) - ) - (wire (pts (xy 102.87 91.44) (xy 110.49 91.44)) - (stroke (width 0) (type default)) - (uuid 7aaab007-f079-408f-9a58-56b5e6c15e7f) - ) - (wire (pts (xy 219.71 46.99) (xy 219.71 48.26)) - (stroke (width 0) (type default)) - (uuid 7d202f4b-6ae7-41ba-bbf8-91ee9ae9bf11) - ) - (wire (pts (xy 182.88 33.02) (xy 182.88 34.29)) - (stroke (width 0) (type default)) - (uuid 7fced63a-ef46-42a2-bfa8-88d2d300a113) - ) - (wire (pts (xy 176.53 34.29) (xy 176.53 33.02)) - (stroke (width 0) (type default)) - (uuid 811fe4ae-4d9e-491d-b0e8-8933950cb5be) - ) - (wire (pts (xy 236.22 45.72) (xy 236.22 44.45)) - (stroke (width 0) (type default)) - (uuid 839939a7-f516-4162-9624-10f055b5a228) - ) - (wire (pts (xy 259.08 67.31) (xy 261.62 67.31)) - (stroke (width 0) (type default)) - (uuid 846985e7-c6f1-450f-8a62-94532b5372ec) - ) - (wire (pts (xy 236.22 44.45) (xy 246.38 44.45)) - (stroke (width 0) (type default)) - (uuid 86addab7-132f-451a-ab53-d65534d1607e) - ) - (wire (pts (xy 160.02 57.15) (xy 160.02 63.5)) - (stroke (width 0) (type default)) - (uuid 86dc9426-5d58-4a4d-9256-16c899f4d11c) - ) - (wire (pts (xy 64.77 48.26) (xy 69.85 48.26)) - (stroke (width 0) (type default)) - (uuid 86e24455-dfec-433f-80dc-c39fde419c1e) - ) - (wire (pts (xy 219.71 96.52) (xy 256.54 96.52)) - (stroke (width 0) (type default)) - (uuid 8856110e-3a32-4b3d-953a-25572067de24) - ) - (wire (pts (xy 128.27 54.61) (xy 128.27 55.88)) - (stroke (width 0) (type default)) - (uuid 8875669a-09fd-49e3-834b-fb79775a5152) - ) - (wire (pts (xy 41.91 34.29) (xy 41.91 35.56)) - (stroke (width 0) (type default)) - (uuid 889851f8-9f91-4273-973a-f59b39f0400a) - ) - (wire (pts (xy 190.5 33.02) (xy 190.5 35.56)) - (stroke (width 0) (type default)) - (uuid 889a9c33-d91a-4548-8507-f801bfafeeed) - ) - (wire (pts (xy 231.14 44.45) (xy 231.14 45.72)) - (stroke (width 0) (type default)) - (uuid 8f41df4a-75c5-46bc-a8c3-5d3f0148c4ec) - ) - (wire (pts (xy 124.46 102.87) (xy 128.27 102.87)) - (stroke (width 0) (type default)) - (uuid 8f6ab6b7-67bb-4706-bb66-3d55c8558431) - ) - (wire (pts (xy 64.77 57.15) (xy 64.77 58.42)) - (stroke (width 0) (type default)) - (uuid 91f76ed0-46c8-4ab3-9260-b06dd9da6255) - ) - (wire (pts (xy 254 53.34) (xy 254 54.61)) - (stroke (width 0) (type default)) - (uuid 94593297-cfb7-447c-80e6-d6a438491c21) - ) - (wire (pts (xy 105.41 45.72) (xy 110.49 45.72)) - (stroke (width 0) (type default)) - (uuid 9600660b-ecc2-4c8d-b81b-4cdb5cadd82b) - ) - (wire (pts (xy 157.48 66.04) (xy 158.75 66.04)) - (stroke (width 0) (type default)) - (uuid 96c16208-2dcf-4069-9c05-8b71bd10214b) - ) - (wire (pts (xy 120.65 46.99) (xy 120.65 45.72)) - (stroke (width 0) (type default)) - (uuid 99341930-798d-403c-9037-dd18c1735461) - ) - (wire (pts (xy 245.11 101.6) (xy 245.11 134.62)) - (stroke (width 0) (type default)) - (uuid 994cff41-56e3-4d1c-9d77-b04edd02df9c) - ) - (wire (pts (xy 259.08 66.04) (xy 251.46 66.04)) - (stroke (width 0) (type default)) - (uuid 9968e922-56e2-42b7-9cd5-b46c4327e31e) - ) - (wire (pts (xy 218.44 90.17) (xy 217.17 90.17)) - (stroke (width 0) (type default)) - (uuid 99e7c8cb-3f1b-44b4-a5de-c55f0a57bf41) - ) - (wire (pts (xy 102.87 67.31) (xy 105.41 67.31)) - (stroke (width 0) (type default)) - (uuid 9bdf28dd-1c79-4457-b9a9-d8360885126c) - ) - (wire (pts (xy 93.98 57.15) (xy 93.98 97.79)) - (stroke (width 0) (type default)) - (uuid 9c4154e7-0da3-4a59-b5bf-3ae7d91d1980) - ) - (wire (pts (xy 219.71 55.88) (xy 219.71 96.52)) - (stroke (width 0) (type default)) - (uuid 9c8407c3-7408-40f6-bb90-5ea1187f4c4f) - ) - (wire (pts (xy 128.27 102.87) (xy 128.27 104.14)) - (stroke (width 0) (type default)) - (uuid 9d98a4ab-bba2-4501-a178-3b67b9210367) - ) - (wire (pts (xy 50.8 34.29) (xy 45.72 34.29)) - (stroke (width 0) (type default)) - (uuid 9e760a6c-d6bf-4d81-9446-72f6d0889c5f) - ) - (wire (pts (xy 34.29 48.26) (xy 64.77 48.26)) - (stroke (width 0) (type default)) - (uuid 9ea442e9-907a-4d6f-815a-171f8f3da236) - ) - (wire (pts (xy 236.22 53.34) (xy 236.22 90.17)) - (stroke (width 0) (type default)) - (uuid a26cbd66-b637-4bd4-bd16-ad289cd2e14a) - ) - (wire (pts (xy 69.85 88.9) (xy 71.12 88.9)) - (stroke (width 0) (type default)) - (uuid a304f8bb-9908-43d6-b984-39aa9d3ee6a4) - ) - (wire (pts (xy 176.53 41.91) (xy 176.53 43.18)) - (stroke (width 0) (type default)) - (uuid a47dd661-1608-40c6-9128-6ce417a2d5a8) - ) - (wire (pts (xy 135.89 46.99) (xy 135.89 45.72)) - (stroke (width 0) (type default)) - (uuid a50010c8-4d90-430d-b26e-d41cba80c5f1) - ) - (wire (pts (xy 135.89 54.61) (xy 135.89 55.88)) - (stroke (width 0) (type default)) - (uuid a5913897-6157-43d7-8158-819728b6aeb7) - ) - (wire (pts (xy 176.53 33.02) (xy 171.45 33.02)) - (stroke (width 0) (type default)) - (uuid a72433ab-0bb4-44e8-828b-b404a8b0e39b) - ) - (wire (pts (xy 267.97 44.45) (xy 261.62 44.45)) - (stroke (width 0) (type default)) - (uuid a75bfeb6-637c-4399-adcc-418096170287) - ) - (wire (pts (xy 190.5 55.88) (xy 190.5 57.15)) - (stroke (width 0) (type default)) - (uuid a91be8bc-dcb5-4c37-815d-24c8afe2ef06) - ) - (wire (pts (xy 50.8 43.18) (xy 50.8 44.45)) - (stroke (width 0) (type default)) - (uuid adea4fe8-030e-4a40-990b-130d838f0e1b) - ) - (wire (pts (xy 160.02 68.58) (xy 160.02 81.28)) - (stroke (width 0) (type default)) - (uuid af0d6653-524f-4b47-ba94-95e1ca1397d2) - ) - (wire (pts (xy 231.14 53.34) (xy 231.14 66.04)) - (stroke (width 0) (type default)) - (uuid b91024ae-8c24-4862-9f88-66259bfd1ec4) - ) - (wire (pts (xy 160.02 63.5) (xy 161.29 63.5)) - (stroke (width 0) (type default)) - (uuid b9960f5e-d8b0-417b-8d79-553b888a9b56) - ) - (wire (pts (xy 45.72 34.29) (xy 45.72 59.69)) - (stroke (width 0) (type default)) - (uuid b9b1354a-f500-404d-8faa-99b174b6b775) - ) - (wire (pts (xy 92.71 91.44) (xy 91.44 91.44)) - (stroke (width 0) (type default)) - (uuid bc758ff1-d4ec-472e-a239-d970b0236044) - ) - (wire (pts (xy 57.15 34.29) (xy 64.77 34.29)) - (stroke (width 0) (type default)) - (uuid c037460b-d785-4168-9730-7c0b238c4294) - ) - (wire (pts (xy 132.08 92.71) (xy 132.08 91.44)) - (stroke (width 0) (type default)) - (uuid c0ff053d-a31a-4fbc-9421-b883cb3d23ea) - ) - (wire (pts (xy 105.41 34.29) (xy 64.77 34.29)) - (stroke (width 0) (type default)) - (uuid c16969d1-a34b-4675-8a55-ada098db33e2) - ) - (wire (pts (xy 259.08 91.44) (xy 259.08 120.65)) - (stroke (width 0) (type default)) - (uuid c1ff8341-84d9-405a-84a6-3b330bc15bb5) - ) - (wire (pts (xy 250.19 101.6) (xy 250.19 102.87)) - (stroke (width 0) (type default)) - (uuid c2b51474-800f-4239-a324-8211c5098939) - ) - (wire (pts (xy 257.81 91.44) (xy 259.08 91.44)) - (stroke (width 0) (type default)) - (uuid c39a99c3-a5ac-422e-84c4-4a79c5f7d54e) - ) - (wire (pts (xy 93.98 97.79) (xy 33.02 97.79)) - (stroke (width 0) (type default)) - (uuid c9e1b4ce-66e4-4997-b653-40b4aa9cda9f) - ) - (wire (pts (xy 57.15 43.18) (xy 57.15 44.45)) - (stroke (width 0) (type default)) - (uuid cddf18c7-aa13-49b8-86a4-8ca768e1f21d) - ) - (wire (pts (xy 261.62 67.31) (xy 261.62 120.65)) - (stroke (width 0) (type default)) - (uuid ce39b7c5-1325-423d-85cf-10c84e601fcb) - ) - (wire (pts (xy 124.46 102.87) (xy 124.46 104.14)) - (stroke (width 0) (type default)) - (uuid d3e22f79-5e96-4414-970c-2ee4f5c8be26) - ) - (wire (pts (xy 190.5 33.02) (xy 231.14 33.02)) - (stroke (width 0) (type default)) - (uuid d56d1eac-d078-4188-89cd-4d8940b87b7d) - ) - (wire (pts (xy 130.81 102.87) (xy 130.81 97.79)) - (stroke (width 0) (type default)) - (uuid d7666022-e4b6-4922-b779-dc8f9cf22fb2) - ) - (wire (pts (xy 135.89 45.72) (xy 128.27 45.72)) - (stroke (width 0) (type default)) - (uuid d8336193-0c6a-450a-b17f-44ce6e543378) - ) - (wire (pts (xy 190.5 46.99) (xy 190.5 48.26)) - (stroke (width 0) (type default)) - (uuid d99af2fa-2f1f-4e6a-aba2-df0cdf0bd9b1) - ) - (wire (pts (xy 57.15 82.55) (xy 68.58 82.55)) - (stroke (width 0) (type default)) - (uuid db6bdf21-088d-45ed-b247-b1e84568f4f9) - ) - (wire (pts (xy 105.41 45.72) (xy 105.41 46.99)) - (stroke (width 0) (type default)) - (uuid dce9db85-1114-4c42-ada6-c3ab2cd8d9a9) - ) - (wire (pts (xy 257.81 91.44) (xy 257.81 90.17)) - (stroke (width 0) (type default)) - (uuid dd2db1c4-c33f-47da-843d-a86081428bb0) - ) - (wire (pts (xy 228.6 90.17) (xy 236.22 90.17)) - (stroke (width 0) (type default)) - (uuid dd68282a-67ee-483e-a535-e430213df65a) - ) - (wire (pts (xy 157.48 63.5) (xy 160.02 63.5)) - (stroke (width 0) (type default)) - (uuid df7e9f1b-cb67-4bea-9494-6b42c1315cda) - ) - (wire (pts (xy 50.8 34.29) (xy 57.15 34.29)) - (stroke (width 0) (type default)) - (uuid e4afcd15-3492-4e27-950c-6716d62227f2) - ) - (wire (pts (xy 68.58 82.55) (xy 78.74 82.55)) - (stroke (width 0) (type default)) - (uuid e4ea914c-95b7-40e4-87b6-c3c86e72091f) - ) - (wire (pts (xy 133.35 68.58) (xy 133.35 67.31)) - (stroke (width 0) (type default)) - (uuid e757f2a8-a230-49a3-bc8a-be01199c7127) - ) - (wire (pts (xy 128.27 102.87) (xy 130.81 102.87)) - (stroke (width 0) (type default)) - (uuid e7975401-490b-485e-9359-65cbafdc65ae) - ) - (wire (pts (xy 34.29 69.85) (xy 34.29 82.55)) - (stroke (width 0) (type default)) - (uuid e93f6340-c137-49c7-a724-215524990489) - ) - (wire (pts (xy 33.02 97.79) (xy 33.02 67.31)) - (stroke (width 0) (type default)) - (uuid e9dac3d9-65f9-4c73-9cbe-cd42b1852224) - ) - (wire (pts (xy 231.14 44.45) (xy 236.22 44.45)) - (stroke (width 0) (type default)) - (uuid ef652169-5654-4f01-919b-c5b357de0f98) - ) - (wire (pts (xy 34.29 58.42) (xy 34.29 64.77)) - (stroke (width 0) (type default)) - (uuid efc8e1ee-cc00-44c1-8da9-5afc10dad8f6) - ) - (wire (pts (xy 57.15 35.56) (xy 57.15 34.29)) - (stroke (width 0) (type default)) - (uuid efd1fca6-cdf9-4187-b093-e19b7395363f) - ) - (wire (pts (xy 50.8 35.56) (xy 50.8 34.29)) - (stroke (width 0) (type default)) - (uuid f1dcdd08-7048-4841-a090-82e23b525d67) - ) - (wire (pts (xy 259.08 67.31) (xy 259.08 66.04)) - (stroke (width 0) (type default)) - (uuid f30828a0-deda-4512-a88b-15589aa85550) - ) - (wire (pts (xy 69.85 48.26) (xy 93.98 48.26)) - (stroke (width 0) (type default)) - (uuid fa79d681-e624-472b-90ca-4bceabd22b58) - ) - (wire (pts (xy 219.71 96.52) (xy 158.75 96.52)) - (stroke (width 0) (type default)) - (uuid fb380bd7-1916-4ca4-a598-0bdcac2dfaac) - ) - (wire (pts (xy 160.02 81.28) (xy 175.26 81.28)) - (stroke (width 0) (type default)) - (uuid fd4bd9f0-1ef7-4201-8732-43d3596c5ea6) - ) - (wire (pts (xy 246.38 45.72) (xy 246.38 44.45)) - (stroke (width 0) (type default)) - (uuid fdfa8463-af02-44fd-b403-438076cb6fc4) - ) - - (symbol (lib_id "Device:C") (at 128.27 50.8 0) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid 0074ef94-0d36-4108-8f14-b1d064783f91) - (property "Reference" "C8" (at 128.27 48.26 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Value" "0.1uF" (at 128.27 53.34 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 129.2352 54.61 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 128.27 50.8 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "2" (uuid 40a700ce-d8c6-499d-85bd-ca5185849750)) - (pin "1" (uuid 7435bd30-37e9-41a7-9e23-93385145da9e)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "C8") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Connector:Conn_01x01_Pin") (at 261.62 125.73 90) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid 02603ffc-8ef0-4551-98e5-69f3d0b5f5ed) - (property "Reference" "X2A1" (at 261.62 125.73 0) - (effects (font (size 1.27 1.27)) (justify right)) - ) - (property "Value" "Conn_01x01_Pin" (at 262.89 126.365 90) - (effects (font (size 1.27 1.27)) (justify right) hide) - ) - (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" (at 261.62 125.73 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 261.62 125.73 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "1" (uuid b0e8089c-1407-4dd7-81ad-5836b1a948f4)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "X2A1") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Device:C_Polarized") (at 50.8 39.37 0) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid 028b1213-6965-4c6b-88c6-99867053371d) - (property "Reference" "C14" (at 50.8 36.83 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Value" "47uF 35v" (at 45.72 41.91 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Footprint" "C47u35v:CAPPRD200W50D525H1250" (at 51.7652 43.18 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 50.8 39.37 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "2" (uuid ecc9dcf8-ef72-45a3-a036-f97d5c03b47a)) - (pin "1" (uuid adfcc31b-373b-4348-88bb-59bab5bfd258)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "C14") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Device:D") (at 261.62 49.53 270) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid 04786958-d145-4302-af4f-030967ac2a8a) - (property "Reference" "D1" (at 261.62 46.99 90) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Value" "12V" (at 261.62 52.07 90) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 261.62 49.53 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 261.62 49.53 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Sim.Device" "D" (at 261.62 49.53 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Sim.Pins" "1=K 2=A" (at 261.62 49.53 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "1" (uuid fc238e8a-f415-426b-bfb8-a60940691ec0)) - (pin "2" (uuid 051bbe09-8bdc-4779-bfa2-a3908276e774)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "D1") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "power:GND") (at 124.46 104.14 0) (unit 1) - (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced) - (uuid 0638dd7e-db00-45d0-ab7e-e480ad52bc71) - (property "Reference" "#PWR0106" (at 124.46 110.49 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Value" "GND" (at 124.46 109.22 0) - (effects (font (size 1.27 1.27))) - ) - (property "Footprint" "" (at 124.46 104.14 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "" (at 124.46 104.14 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "1" (uuid 1cb34798-dd6e-4100-9bc6-8d54414adf08)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "#PWR0106") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "power:GND") (at 171.45 74.93 0) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid 0ce31e06-d5bf-4265-8302-b0df1a209197) - (property "Reference" "#PWR0109" (at 171.45 81.28 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Value" "GND" (at 171.45 80.01 0) - (effects (font (size 1.27 1.27))) - ) - (property "Footprint" "" (at 171.45 74.93 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "" (at 171.45 74.93 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "1" (uuid 1a78a636-f0a9-45b0-8a4e-9f2c470d570c)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "#PWR0109") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "power:GND") (at 135.89 55.88 0) (unit 1) - (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced) - (uuid 12f01892-6ea7-495e-854d-744cf9b544bc) - (property "Reference" "#PWR0108" (at 135.89 62.23 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Value" "GND" (at 135.89 60.96 0) - (effects (font (size 1.27 1.27))) - ) - (property "Footprint" "" (at 135.89 55.88 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "" (at 135.89 55.88 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "1" (uuid 942cf78d-d279-40d4-80ca-d3ba61fd8251)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "#PWR0108") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Device:C_Polarized") (at 224.79 66.04 270) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid 225d2ae8-3230-4005-a4b4-2094ff960f52) - (property "Reference" "C4" (at 227.33 63.5 90) - (effects (font (size 1.27 1.27))) - ) - (property "Value" "47uF 63v" (at 231.14 67.31 90) - (effects (font (size 1.27 1.27))) - ) - (property "Footprint" "C47u63v:CAPPRD350W65D800H1250" (at 220.98 67.0052 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 224.79 66.04 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "2" (uuid 301a08fd-b6be-45bd-a4b3-131c4d4ae900)) - (pin "1" (uuid 330ccdc2-e319-47b7-b9da-f6a3ec507838)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "C4") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Device:R") (at 105.41 50.8 0) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid 22c624a2-9c69-4937-8b4e-0e03aaaaa038) - (property "Reference" "R14" (at 105.41 46.99 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Value" "2.2K" (at 105.41 54.61 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 103.632 50.8 90) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 105.41 50.8 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "2" (uuid a1358048-f4a8-46fd-b384-828214ca563a)) - (pin "1" (uuid fce8e472-b813-4a8e-9411-5e0e03bbe999)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "R14") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Device:C_Polarized") (at 93.98 53.34 0) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid 26f9efc1-f18f-46a4-a4e0-fd7b825b179e) - (property "Reference" "C12" (at 93.98 50.8 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Value" "47uF 35v" (at 88.9 55.88 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Footprint" "C47u35v:CAPPRD200W50D525H1250" (at 94.9452 57.15 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 93.98 53.34 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "2" (uuid 4978d725-9316-4043-8a1f-b1c9ce984c4e)) - (pin "1" (uuid 88b3b53e-f532-4bb8-82a4-d6d592645dc1)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "C12") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "power:GND") (at 190.5 57.15 0) (unit 1) - (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced) - (uuid 27f8adc3-3950-478b-b798-a085134eab29) - (property "Reference" "#PWR0112" (at 190.5 63.5 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Value" "GND" (at 190.5 62.23 0) - (effects (font (size 1.27 1.27))) - ) - (property "Footprint" "" (at 190.5 57.15 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "" (at 190.5 57.15 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "1" (uuid 15910eea-dab8-4e08-897a-116a0d158e23)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "#PWR0112") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Device:R") (at 179.07 81.28 90) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid 333c6bef-4cf7-4319-b480-a4d554049f1a) - (property "Reference" "R9" (at 175.26 82.55 90) - (effects (font (size 1.27 1.27))) - ) - (property "Value" "2.2K" (at 184.15 82.55 90) - (effects (font (size 1.27 1.27))) - ) - (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 179.07 83.058 90) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 179.07 81.28 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "2" (uuid 70759d1c-be29-4c5c-8809-98315f1c5ab1)) - (pin "1" (uuid e877352c-a598-4129-b31b-d17acebc6954)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "R9") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Device:C_Polarized") (at 99.06 67.31 270) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid 388d7ed8-52d9-442b-b762-60006c60c529) - (property "Reference" "C11" (at 101.6 64.77 90) - (effects (font (size 1.27 1.27))) - ) - (property "Value" "47uF 63v" (at 105.41 68.58 90) - (effects (font (size 1.27 1.27))) - ) - (property "Footprint" "C47u63v:CAPPRD350W65D800H1250" (at 95.25 68.2752 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 99.06 67.31 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "2" (uuid 51a481e5-83de-40ff-89b7-dfc4eae21bc2)) - (pin "1" (uuid 89572e0b-9d69-46f6-8e01-4ad6452bc3f7)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "C11") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Connector_Generic:Conn_01x01") (at 26.67 85.09 0) (unit 1) - (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced) - (uuid 38fe0de6-7d2f-4f1f-80d5-5bc0704f2c9a) - (property "Reference" "J1" (at 29.21 83.82 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Value" "Conn_01x01" (at 29.21 86.36 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Footprint" "" (at 26.67 85.09 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 26.67 85.09 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "1" (uuid 67cc4a14-d1b6-4462-bcdc-06d9ed4be212)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "J1") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Device:R") (at 121.92 91.44 90) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid 4281c715-bfa5-4c1d-833f-007ae19a4629) - (property "Reference" "R11" (at 118.11 92.71 90) - (effects (font (size 1.27 1.27))) - ) - (property "Value" "47" (at 125.73 92.71 90) - (effects (font (size 1.27 1.27))) - ) - (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 121.92 93.218 90) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 121.92 91.44 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "2" (uuid 6faefed0-61f7-4fd8-8ccb-07f56d270344)) - (pin "1" (uuid 4db49fe1-988c-4207-bdeb-2ca6e8d955f4)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "R11") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "power:Earth") (at 182.88 43.18 0) (unit 1) - (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced) - (uuid 42e49b7c-ab92-43e4-8f7c-3d91038226a9) - (property "Reference" "#PWR0111" (at 182.88 49.53 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Value" "Earth" (at 182.88 46.99 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Footprint" "" (at 182.88 43.18 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 182.88 43.18 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "1" (uuid b363b289-7b34-4a27-8f0d-4b981c713ce6)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "#PWR0111") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Device:R") (at 247.65 90.17 90) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid 465be87b-5590-4da0-9122-4e5009c124ff) - (property "Reference" "R1" (at 243.84 91.44 90) - (effects (font (size 1.27 1.27))) - ) - (property "Value" "47" (at 251.46 91.44 90) - (effects (font (size 1.27 1.27))) - ) - (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 247.65 91.948 90) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 247.65 90.17 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "2" (uuid 518371d7-430d-4ece-85c1-e014c34e5f91)) - (pin "1" (uuid 8e32f884-af0c-4f58-b1d4-dee7df354570)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "R1") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "OPA1642AID:OPA1642AID") (at 45.72 67.31 0) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid 46bd3898-2842-4255-93e2-77804f67ee14) - (property "Reference" "IC2" (at 49.53 64.77 0) - (effects (font (size 1.27 1.27))) - ) - (property "Value" "OPA1642AID" (at 53.34 69.85 0) - (effects (font (size 1.27 1.27))) - ) - (property "Footprint" "opa1642:SOIC127P600X175-8N" (at 45.72 67.31 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "Datasheet" "" (at 45.72 67.31 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "MF" "Texas Instruments" (at 45.72 67.31 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "MAXIMUM_PACKAGE_HEIGHT" "1.75 mm" (at 45.72 67.31 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "Package" "SOIC-8 Texas Instruments" (at 45.72 67.31 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "Price" "None" (at 45.72 67.31 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "Check_prices" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=eda" (at 45.72 67.31 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "STANDARD" "IPC 7351B" (at 45.72 67.31 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "PARTREV" "D" (at 45.72 67.31 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "SnapEDA_Link" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=snap" (at 45.72 67.31 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "MP" "OPA1642AID" (at 45.72 67.31 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "Description" "\n \n Dual SoundPlus™ high-performance, JFET-input audio op amp\n \n" (at 45.72 67.31 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "Availability" "In Stock" (at 45.72 67.31 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "MANUFACTURER" "Texas Instruments" (at 45.72 67.31 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (pin "1" (uuid f6adf7a0-f4f6-489d-aa22-16fd1d80ab13)) - (pin "7" (uuid c8f04e9e-37cd-44d0-befd-fa1c054349ed)) - (pin "4" (uuid d54d4c06-fe4e-4323-b930-98b2c1a2dba1)) - (pin "2" (uuid 76767c82-1b5b-439e-a798-ee79a4f46bba)) - (pin "6" (uuid c36582c0-b02a-453d-9f70-9abbd6fba049)) - (pin "8" (uuid 8849be4b-fb86-4bc5-a0c6-953ccb2e220e)) - (pin "3" (uuid 29daf701-3def-4826-95b5-e97a339f144a)) - (pin "5" (uuid 1c1b288a-a713-40eb-8869-436701df4af6)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "IC2") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Device:R") (at 110.49 50.8 0) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid 486efbe6-6d60-4f65-a28a-eac2f703a21a) - (property "Reference" "R13" (at 110.49 46.99 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Value" "2.2K" (at 110.49 54.61 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 108.712 50.8 90) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 110.49 50.8 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "2" (uuid bc0f2659-41ff-4316-90ad-7a947ab2a415)) - (pin "1" (uuid feaeb753-707d-4138-a168-f4b32dfbad00)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "R13") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Device:C_Polarized") (at 246.38 49.53 0) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid 4af43834-c924-4e65-939c-9334e1de4766) - (property "Reference" "C2" (at 246.38 46.99 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Value" "47uF 35v" (at 241.3 52.07 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Footprint" "C47u35v:CAPPRD200W50D525H1250" (at 247.3452 53.34 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 246.38 49.53 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "2" (uuid 647869d4-07f5-4c7f-abe2-670267baac61)) - (pin "1" (uuid 65bae4a4-9996-4268-bc65-e781d99f3f37)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "C2") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Device:C_Polarized") (at 219.71 52.07 0) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid 4b15cc8f-884d-43ed-8a34-09c6b829c7ae) - (property "Reference" "C5" (at 219.71 49.53 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Value" "47uF 35v" (at 214.63 54.61 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Footprint" "C47u35v:CAPPRD200W50D525H1250" (at 220.6752 55.88 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 219.71 52.07 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "2" (uuid 525fdf3a-5064-41df-a1da-296395c40b65)) - (pin "1" (uuid 7f9c78b5-f669-4314-abbc-4dd36132e90c)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "C5") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Device:R") (at 82.55 82.55 90) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid 4dfa4bfd-4e46-43b4-9020-c77e950185e1) - (property "Reference" "R16" (at 82.55 80.01 90) - (effects (font (size 1.27 1.27))) - ) - (property "Value" "2.2K" (at 82.55 85.09 90) - (effects (font (size 1.27 1.27))) - ) - (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 82.55 84.328 90) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 82.55 82.55 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "2" (uuid 7d35210b-3864-4e01-beca-84275481542d)) - (pin "1" (uuid b795f1c6-d889-4b77-937f-8d4fed456b68)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "R16") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "power:Earth") (at 50.8 44.45 0) (unit 1) - (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced) - (uuid 55496943-3d08-49df-8e72-559ad6363ff2) - (property "Reference" "#PWR0102" (at 50.8 50.8 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Value" "Earth" (at 50.8 48.26 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Footprint" "" (at 50.8 44.45 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 50.8 44.45 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "1" (uuid a0107957-0ab7-4f4b-b471-781945bc510d)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "#PWR0102") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Device:C") (at 182.88 38.1 0) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid 57c290cf-4a3a-4689-a5cc-79dd666271df) - (property "Reference" "C6" (at 182.88 35.56 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Value" "0.1uF" (at 182.88 40.64 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Footprint" "C.022uF50v:K223K15X7RF5UL2" (at 183.8452 41.91 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 182.88 38.1 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "2" (uuid ace7e3a0-e0a8-4d53-aed7-f73bbc2ba9ac)) - (pin "1" (uuid 7875c3ce-ca93-43d1-a530-cfb1c2e4f9b4)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "C6") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Connector:Conn_01x01_Pin") (at 25.4 64.77 0) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid 5927db5e-0de5-4020-a1e2-d3c795f23f3a) - (property "Reference" "SGNL_B1" (at 25.4 64.77 0) - (effects (font (size 1.27 1.27)) (justify right)) - ) - (property "Value" "Conn_01x01_Pin" (at 24.765 66.04 90) - (effects (font (size 1.27 1.27)) (justify right) hide) - ) - (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" (at 25.4 64.77 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 25.4 64.77 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "1" (uuid 1f5986a4-36e7-4342-892f-caed098ad8ac)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "SGNL_B1") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "power:Earth") (at 176.53 43.18 0) (unit 1) - (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced) - (uuid 5eef0969-7988-4f2f-b554-6f3c5c35fdaf) - (property "Reference" "#PWR0110" (at 176.53 49.53 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Value" "Earth" (at 176.53 46.99 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Footprint" "" (at 176.53 43.18 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 176.53 43.18 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "1" (uuid 02e52f50-c25e-43df-a972-8981bec33971)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "#PWR0110") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Device:D") (at 135.89 50.8 270) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid 60bb60f7-d540-494b-9a5e-5a737fa70d44) - (property "Reference" "D2" (at 135.89 48.26 90) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Value" "12V" (at 135.89 53.34 90) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 135.89 50.8 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 135.89 50.8 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Sim.Device" "D" (at 135.89 50.8 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Sim.Pins" "1=K 2=A" (at 135.89 50.8 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "1" (uuid 48fffc35-69ad-407d-8ac5-a48aaef81aaa)) - (pin "2" (uuid 6d04fede-95df-4e99-9581-c968c34a51b8)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "D2") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Device:R") (at 34.29 54.61 0) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid 621df7af-eee1-4ba7-b334-c8f75f6a97e7) - (property "Reference" "R20" (at 34.29 50.8 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Value" "1G" (at 34.29 58.42 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Footprint" "R1Go:RESAD1650W70L650D250" (at 32.512 54.61 90) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 34.29 54.61 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "2" (uuid 37367294-eb12-4385-8a7d-d76663413377)) - (pin "1" (uuid adbf79fc-38fb-453c-9ec4-dcfac1a233ec)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "R20") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "power:GND") (at 64.77 58.42 0) (unit 1) - (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced) - (uuid 63c7cdab-6e11-4929-be9e-27ccae01fe37) - (property "Reference" "#PWR0104" (at 64.77 64.77 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Value" "GND" (at 64.77 63.5 0) - (effects (font (size 1.27 1.27))) - ) - (property "Footprint" "" (at 64.77 58.42 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "" (at 64.77 58.42 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "1" (uuid c98fc743-875d-40d3-93ae-0d4889cfef40)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "#PWR0104") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Connector:Conn_01x01_Pin") (at 128.27 109.22 90) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid 64e688e4-4221-4813-bb3e-a93bb87dbbc0) - (property "Reference" "GND_T2" (at 128.27 109.22 0) - (effects (font (size 1.27 1.27)) (justify right)) - ) - (property "Value" "Conn_01x01_Pin" (at 129.54 109.855 90) - (effects (font (size 1.27 1.27)) (justify right) hide) - ) - (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" (at 128.27 109.22 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 128.27 109.22 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "1" (uuid 92d01587-a830-495c-834d-8598d13fa0bc)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "GND_T2") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Connector:Conn_01x01_Pin") (at 142.24 52.07 90) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid 6778b725-cc7e-4fa7-8d8b-1f47e2db759c) - (property "Reference" "VCC_B1" (at 142.24 52.07 0) - (effects (font (size 1.27 1.27)) (justify right)) - ) - (property "Value" "Conn_01x01_Pin" (at 143.51 52.705 90) - (effects (font (size 1.27 1.27)) (justify right) hide) - ) - (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" (at 142.24 52.07 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 142.24 52.07 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "1" (uuid 743b3ee1-c27b-44f5-9b84-fc078bb4ae34)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "VCC_B1") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "power:Earth") (at 57.15 44.45 0) (unit 1) - (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced) - (uuid 68e3abc2-7a79-4ae5-adaf-6dd4d34703e8) - (property "Reference" "#PWR0103" (at 57.15 50.8 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Value" "Earth" (at 57.15 48.26 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Footprint" "" (at 57.15 44.45 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 57.15 44.45 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "1" (uuid 0cde865c-71f3-4a0d-876e-14769de2d823)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "#PWR0103") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Device:R") (at 53.34 82.55 90) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid 6a141024-0740-4682-ac78-fa29ac380bd3) - (property "Reference" "R19" (at 49.53 83.82 90) - (effects (font (size 1.27 1.27))) - ) - (property "Value" "2.2K" (at 58.42 83.82 90) - (effects (font (size 1.27 1.27))) - ) - (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 53.34 84.328 90) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 53.34 82.55 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "2" (uuid 57ab3927-126d-4bcb-b960-d87e99dac8f6)) - (pin "1" (uuid 8b59cb1e-3efe-4123-946e-88111aaeec9a)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "R19") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Device:R") (at 190.5 39.37 0) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid 6bc81894-9db7-4be7-a876-2de954b2e8d4) - (property "Reference" "R8" (at 190.5 35.56 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Value" "47K" (at 190.5 43.18 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 188.722 39.37 90) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 190.5 39.37 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "2" (uuid f6fd3a46-9bd3-4b6f-90c5-12f4fdc83af9)) - (pin "1" (uuid f7e0c90e-3c47-4d51-98ea-1a1c1bcebdf5)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "R8") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Connector:Conn_01x01_Pin") (at 41.91 40.64 90) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid 6e74e034-da91-4106-b8de-7f1079a017da) - (property "Reference" "VCC_B2" (at 41.91 40.64 0) - (effects (font (size 1.27 1.27)) (justify right)) - ) - (property "Value" "Conn_01x01_Pin" (at 43.18 41.275 90) - (effects (font (size 1.27 1.27)) (justify right) hide) - ) - (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" (at 41.91 40.64 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 41.91 40.64 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "1" (uuid 8a6f6c2d-76de-4ed7-9b45-ed1e73bbcf25)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "VCC_B2") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Connector:Conn_01x01_Pin") (at 267.97 50.8 90) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid 7056a7e2-eebb-4df3-8f54-dadb45bfed44) - (property "Reference" "VCC_A1" (at 267.97 50.8 0) - (effects (font (size 1.27 1.27)) (justify right)) - ) - (property "Value" "Conn_01x01_Pin" (at 269.24 51.435 90) - (effects (font (size 1.27 1.27)) (justify right) hide) - ) - (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" (at 267.97 50.8 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 267.97 50.8 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "1" (uuid fe39015c-d0fe-44f1-a61c-5dd362f67ab6)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "VCC_A1") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Device:R") (at 231.14 39.37 0) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid 7f13f25b-68e1-44e1-992e-6e69c71b1400) - (property "Reference" "R5" (at 231.14 35.56 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Value" "200" (at 231.14 43.18 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 229.362 39.37 90) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 231.14 39.37 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "2" (uuid 723218d0-30ba-4d7d-b4ad-dcaf19ce4da5)) - (pin "1" (uuid 0c84d6f8-f220-44e8-a38e-cbe00dda0ac3)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "R5") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Device:R") (at 231.14 49.53 0) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid 831a82f3-bee1-4a20-9f0c-de8891a80b24) - (property "Reference" "R4" (at 231.14 45.72 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Value" "2.2K" (at 231.14 53.34 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 229.362 49.53 90) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 231.14 49.53 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "2" (uuid 24ce802d-7dfa-4097-a649-d24b888ef91b)) - (pin "1" (uuid 4ed7e121-3441-41dc-bdf1-ce3e7760743d)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "R4") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Device:C") (at 254 49.53 0) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid 85f8809e-e152-4de2-87ff-91f95cdc3dd3) - (property "Reference" "C1" (at 254 46.99 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Value" "0.1uF" (at 254 52.07 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 254.9652 53.34 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 254 49.53 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "2" (uuid b7ea7844-17c6-4c08-bf47-43522e085528)) - (pin "1" (uuid 07c5af00-f156-4fd3-8ba9-83534d940a6d)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "C1") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Connector:Conn_01x01_Pin") (at 152.4 63.5 0) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid 8a06125c-2a98-42e5-987b-f3b86e05fdf0) - (property "Reference" "SGNL_A1" (at 152.4 63.5 0) - (effects (font (size 1.27 1.27)) (justify right)) - ) - (property "Value" "Conn_01x01_Pin" (at 151.765 64.77 90) - (effects (font (size 1.27 1.27)) (justify right) hide) - ) - (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" (at 152.4 63.5 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 152.4 63.5 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "1" (uuid dc757226-c32d-437b-8181-dc9c7ef42847)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "SGNL_A1") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Device:R") (at 64.77 53.34 0) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid 8a64f8ab-cec7-4969-9401-c34ade5f0cb5) - (property "Reference" "R17" (at 64.77 49.53 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Value" "47K" (at 64.77 57.15 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 62.992 53.34 90) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 64.77 53.34 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "2" (uuid 56b00a3a-50d5-44ba-8e34-e5b658887ba0)) - (pin "1" (uuid 84750aa7-df07-4ba8-a9a5-3927fa32b3c2)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "R17") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "OPA1642AID:OPA1642AID") (at 171.45 66.04 0) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid 8d506b1e-5a87-423a-8d59-2dff832fadc9) - (property "Reference" "IC1" (at 175.26 63.5 0) - (effects (font (size 1.27 1.27))) - ) - (property "Value" "OPA1642AID" (at 179.07 68.58 0) - (effects (font (size 1.27 1.27))) - ) - (property "Footprint" "opa1642:SOIC127P600X175-8N" (at 171.45 66.04 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "Datasheet" "" (at 171.45 66.04 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "MF" "Texas Instruments" (at 171.45 66.04 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "MAXIMUM_PACKAGE_HEIGHT" "1.75 mm" (at 171.45 66.04 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "Package" "SOIC-8 Texas Instruments" (at 171.45 66.04 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "Price" "None" (at 171.45 66.04 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "Check_prices" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=eda" (at 171.45 66.04 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "STANDARD" "IPC 7351B" (at 171.45 66.04 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "PARTREV" "D" (at 171.45 66.04 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "SnapEDA_Link" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=snap" (at 171.45 66.04 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "MP" "OPA1642AID" (at 171.45 66.04 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "Description" "\n \n Dual SoundPlus™ high-performance, JFET-input audio op amp\n \n" (at 171.45 66.04 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "Availability" "In Stock" (at 171.45 66.04 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "MANUFACTURER" "Texas Instruments" (at 171.45 66.04 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (pin "1" (uuid 3df379a1-e2db-4012-b7f4-e03ddff491f4)) - (pin "7" (uuid c8f04e9e-37cd-44d0-befd-fa1c054349ee)) - (pin "4" (uuid 651337f9-8ba0-4fb4-a19a-5b2153e21a46)) - (pin "2" (uuid ffee3cea-43a3-4548-959e-f592c529c82d)) - (pin "6" (uuid c36582c0-b02a-453d-9f70-9abbd6fba04a)) - (pin "8" (uuid 6e9185ff-d89f-45cd-881a-ae7bd73c8482)) - (pin "3" (uuid 2b4ed616-8377-450b-a166-514a2dceb365)) - (pin "5" (uuid 1c1b288a-a713-40eb-8869-436701df4af7)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "IC1") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Device:R") (at 190.5 52.07 0) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid 9073f975-3395-426e-a26b-e4f39deda04a) - (property "Reference" "R7" (at 190.5 48.26 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Value" "47K" (at 190.5 55.88 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 188.722 52.07 90) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 190.5 52.07 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "2" (uuid f0c9e713-d820-482b-9034-493d59e5d602)) - (pin "1" (uuid b724afc6-2e72-4c95-8481-b7e672131d32)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "R7") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Device:C_Polarized") (at 99.06 91.44 270) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid 90b176ff-c759-4172-98d6-a482a71dc515) - (property "Reference" "C10" (at 101.6 88.9 90) - (effects (font (size 1.27 1.27))) - ) - (property "Value" "47uF 63v" (at 105.41 92.71 90) - (effects (font (size 1.27 1.27))) - ) - (property "Footprint" "C47u63v:CAPPRD350W65D800H1250" (at 95.25 92.4052 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 99.06 91.44 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "2" (uuid f1b69faa-bead-4c39-bc09-4ced25f2253d)) - (pin "1" (uuid 65dc8b05-7f72-46e6-a78b-a3bc00e18890)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "C10") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "power:GND") (at 261.62 54.61 0) (unit 1) - (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced) - (uuid 94e815d1-ccba-4300-acdb-411e86c0272d) - (property "Reference" "#PWR0116" (at 261.62 60.96 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Value" "GND" (at 261.62 59.69 0) - (effects (font (size 1.27 1.27))) - ) - (property "Footprint" "" (at 261.62 54.61 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "" (at 261.62 54.61 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "1" (uuid 60bc8531-cbca-4d52-a219-177c287740b9)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "#PWR0116") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Connector:Conn_01x01_Pin") (at 25.4 67.31 0) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid 989fc3e9-94aa-4ae0-8fd0-530b54bc7c6a) - (property "Reference" "GND_B1" (at 25.4 67.31 0) - (effects (font (size 1.27 1.27)) (justify right)) - ) - (property "Value" "Conn_01x01_Pin" (at 24.765 68.58 90) - (effects (font (size 1.27 1.27)) (justify right) hide) - ) - (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" (at 25.4 67.31 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 25.4 67.31 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "1" (uuid ebb67577-81cb-402a-a479-e6b69b6a2a4c)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "GND_B1") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Device:R") (at 121.92 67.31 90) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid 9a83ce8c-c4ea-4707-8978-a44f631e4fc0) - (property "Reference" "R12" (at 118.11 68.58 90) - (effects (font (size 1.27 1.27))) - ) - (property "Value" "47" (at 125.73 68.58 90) - (effects (font (size 1.27 1.27))) - ) - (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 121.92 69.088 90) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 121.92 67.31 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "2" (uuid 29c69a30-72c3-4c8e-853b-16a0d81d7ab7)) - (pin "1" (uuid 03ca679f-145d-4409-b8c3-fb649159ea82)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "R12") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Connector:Conn_01x01_Pin") (at 135.89 127 90) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid 9e00ee5d-3600-4941-9f50-ffa5b59f36da) - (property "Reference" "X2B1" (at 135.89 127 0) - (effects (font (size 1.27 1.27)) (justify right)) - ) - (property "Value" "Conn_01x01_Pin" (at 137.16 127.635 90) - (effects (font (size 1.27 1.27)) (justify right) hide) - ) - (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" (at 135.89 127 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 135.89 127 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "1" (uuid f6197fba-036d-47cd-8ff2-bcb89febeb1e)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "X2B1") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "power:GND") (at 246.38 54.61 0) (unit 1) - (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced) - (uuid 9ef2a4b2-dd03-4616-8256-be478fd95499) - (property "Reference" "#PWR0113" (at 246.38 60.96 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Value" "GND" (at 246.38 59.69 0) - (effects (font (size 1.27 1.27))) - ) - (property "Footprint" "" (at 246.38 54.61 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "" (at 246.38 54.61 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "1" (uuid 9ddd2182-efff-4095-8aea-063efb3c9f4c)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "#PWR0113") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Device:R") (at 208.28 81.28 90) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid a10f13f8-a81d-4f2b-b313-a7028981413d) - (property "Reference" "R6" (at 204.47 82.55 90) - (effects (font (size 1.27 1.27))) - ) - (property "Value" "2.2K" (at 213.36 82.55 90) - (effects (font (size 1.27 1.27))) - ) - (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 208.28 83.058 90) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 208.28 81.28 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "2" (uuid e56fb348-0eed-4724-8374-d5ed289135fc)) - (pin "1" (uuid 2dc2e58e-bc13-43b6-aacc-05e583e6b221)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "R6") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Device:R") (at 160.02 53.34 0) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid a3724ff5-8cb6-46d0-b421-63da8a253dc7) - (property "Reference" "R10" (at 160.02 49.53 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Value" "1G" (at 160.02 57.15 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Footprint" "R1Go:RESAD1650W70L650D250" (at 158.242 53.34 90) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 160.02 53.34 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "2" (uuid 6cf9d0d0-dcc0-4e99-8d52-6d40b2b7c1ac)) - (pin "1" (uuid d97e47c4-78d6-4cb3-aec2-ef357ac9254f)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "R10") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "OPA1642AID:OPA1642AID") (at 207.01 90.17 0) (mirror x) (unit 2) - (in_bom yes) (on_board yes) (dnp no) - (uuid adb405c9-094f-4a77-a219-d4048679141c) - (property "Reference" "IC1" (at 208.28 86.36 0) - (effects (font (size 1.27 1.27))) - ) - (property "Value" "OPA1642AID" (at 212.09 93.98 0) - (effects (font (size 1.27 1.27))) - ) - (property "Footprint" "opa1642:SOIC127P600X175-8N" (at 207.01 90.17 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "Datasheet" "" (at 207.01 90.17 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "MF" "Texas Instruments" (at 207.01 90.17 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "MAXIMUM_PACKAGE_HEIGHT" "1.75 mm" (at 207.01 90.17 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "Package" "SOIC-8 Texas Instruments" (at 207.01 90.17 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "Price" "None" (at 207.01 90.17 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "Check_prices" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=eda" (at 207.01 90.17 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "STANDARD" "IPC 7351B" (at 207.01 90.17 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "PARTREV" "D" (at 207.01 90.17 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "SnapEDA_Link" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=snap" (at 207.01 90.17 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "MP" "OPA1642AID" (at 207.01 90.17 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "Description" "\n \n Dual SoundPlus™ high-performance, JFET-input audio op amp\n \n" (at 207.01 90.17 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "Availability" "In Stock" (at 207.01 90.17 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "MANUFACTURER" "Texas Instruments" (at 207.01 90.17 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (pin "1" (uuid 8eb7a723-ff49-4e64-bcff-d54dedebf6de)) - (pin "7" (uuid 05d5304f-1ed3-4e59-a514-76c851c09ee5)) - (pin "4" (uuid 5ea9edc8-d7e5-498d-a5e1-f4d8f0e59841)) - (pin "2" (uuid 223a6f4e-dc79-479d-8844-0b96b300e0c6)) - (pin "6" (uuid 476b9f2a-7339-4832-a12b-b9f0e4788b29)) - (pin "8" (uuid 30ff56b3-f2da-4beb-89d7-da61228bd144)) - (pin "3" (uuid bf170eff-2b68-464c-8e53-81064b7f76b1)) - (pin "5" (uuid 5a08e4c8-6a5e-47fb-957b-3a799787a7e7)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "IC1") (unit 2) - ) - ) - ) - ) - - (symbol (lib_id "power:GND") (at 120.65 55.88 0) (unit 1) - (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced) - (uuid b298509f-d04e-48de-bbad-f0bcbab3a04f) - (property "Reference" "#PWR0105" (at 120.65 62.23 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Value" "GND" (at 120.65 60.96 0) - (effects (font (size 1.27 1.27))) - ) - (property "Footprint" "" (at 120.65 55.88 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "" (at 120.65 55.88 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "1" (uuid e2867602-0acc-44af-823e-6d73343203c4)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "#PWR0105") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Device:C") (at 57.15 39.37 0) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid b34f1ed3-ca84-4b39-accd-7cbb7c08ede6) - (property "Reference" "C13" (at 57.15 36.83 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Value" "0.1uF" (at 57.15 41.91 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 58.1152 43.18 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 57.15 39.37 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "2" (uuid 08381df4-f68a-4b02-838a-e33bc5db6181)) - (pin "1" (uuid f9c91b11-1320-43ce-a281-800009a799b3)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "C13") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Device:C_Polarized") (at 224.79 90.17 270) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid b794b8cc-7dca-48f0-a5b9-9fe56f5cb9c1) - (property "Reference" "C3" (at 227.33 87.63 90) - (effects (font (size 1.27 1.27))) - ) - (property "Value" "47uF 63v" (at 231.14 91.44 90) - (effects (font (size 1.27 1.27))) - ) - (property "Footprint" "C47u63v:CAPPRD350W65D800H1250" (at 220.98 91.1352 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 224.79 90.17 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "2" (uuid 660c13ef-ecb7-4c3d-86fd-115e4d9a0c71)) - (pin "1" (uuid c590c216-8b22-4232-85fc-4f587bd02276)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "C3") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "power:GND") (at 254 54.61 0) (unit 1) - (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced) - (uuid b83e3479-76fc-41a1-9e65-7d4d4f852f71) - (property "Reference" "#PWR0115" (at 254 60.96 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Value" "GND" (at 254 59.69 0) - (effects (font (size 1.27 1.27))) - ) - (property "Footprint" "" (at 254 54.61 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "" (at 254 54.61 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "1" (uuid 65176011-8e4a-466d-b5eb-0012c0aa8023)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "#PWR0115") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "power:GND") (at 128.27 55.88 0) (unit 1) - (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced) - (uuid ba927458-14a9-4bb5-988c-8c8ee4e370d6) - (property "Reference" "#PWR0107" (at 128.27 62.23 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Value" "GND" (at 128.27 60.96 0) - (effects (font (size 1.27 1.27))) - ) - (property "Footprint" "" (at 128.27 55.88 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "" (at 128.27 55.88 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "1" (uuid b64aa85b-c13f-4d17-8d41-c3be2cbb7a2c)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "#PWR0107") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Connector:Conn_01x01_Pin") (at 167.64 39.37 90) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid c623b86b-7f7f-40b9-93e6-26635740e815) - (property "Reference" "VCC_A2" (at 167.64 39.37 0) - (effects (font (size 1.27 1.27)) (justify right)) - ) - (property "Value" "Conn_01x01_Pin" (at 168.91 40.005 90) - (effects (font (size 1.27 1.27)) (justify right) hide) - ) - (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" (at 167.64 39.37 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 167.64 39.37 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "1" (uuid 74392829-b572-4043-b75c-ce94c7303916)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "VCC_A2") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Connector:Conn_01x01_Pin") (at 254 107.95 90) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid c6463406-90eb-4918-8130-603a8949491f) - (property "Reference" "GND_T1" (at 254 107.95 0) - (effects (font (size 1.27 1.27)) (justify right)) - ) - (property "Value" "Conn_01x01_Pin" (at 255.27 108.585 90) - (effects (font (size 1.27 1.27)) (justify right) hide) - ) - (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" (at 254 107.95 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 254 107.95 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "1" (uuid dc641fdf-29e7-48f6-a8bd-98631f77428a)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "GND_T1") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Connector:Conn_01x01_Pin") (at 259.08 125.73 90) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid caa6c8b8-ee7b-44c3-a728-7e55c5ac92d4) - (property "Reference" "X3A1" (at 259.08 125.73 0) - (effects (font (size 1.27 1.27)) (justify right)) - ) - (property "Value" "Conn_01x01_Pin" (at 260.35 126.365 90) - (effects (font (size 1.27 1.27)) (justify right) hide) - ) - (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" (at 259.08 125.73 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 259.08 125.73 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "1" (uuid ddde005c-04b1-441b-8f96-405d6365ad7a)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "X3A1") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Connector:Conn_01x01_Pin") (at 133.35 127 90) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid cb6e0e92-8106-4918-9d8c-3e3013d6e7e1) - (property "Reference" "X3B1" (at 133.35 127 0) - (effects (font (size 1.27 1.27)) (justify right)) - ) - (property "Value" "Conn_01x01_Pin" (at 134.62 127.635 90) - (effects (font (size 1.27 1.27)) (justify right) hide) - ) - (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" (at 133.35 127 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 133.35 127 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "1" (uuid 83ee8894-d279-409f-872d-1bb4b54b4711)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "X3B1") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Connector:Conn_01x01_Pin") (at 130.81 140.97 90) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid cf4c5d8d-0c85-43b3-b2ab-eff2610198e1) - (property "Reference" "X1" (at 130.81 140.97 0) - (effects (font (size 1.27 1.27)) (justify right)) - ) - (property "Value" "Conn_01x01_Pin" (at 132.08 141.605 90) - (effects (font (size 1.27 1.27)) (justify right) hide) - ) - (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" (at 130.81 140.97 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 130.81 140.97 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "1" (uuid ede1e98a-7f1e-4164-9b48-4f99624e3fdb)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "X1") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Device:C_Polarized") (at 120.65 50.8 0) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid d1189f40-af74-4922-94ba-fe238cf5f19c) - (property "Reference" "C9" (at 120.65 48.26 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Value" "47uF 35v" (at 115.57 53.34 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Footprint" "C47u35v:CAPPRD200W50D525H1250" (at 121.6152 54.61 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 120.65 50.8 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "2" (uuid 21347f6b-880b-454c-b525-e7b32506f81a)) - (pin "1" (uuid e6fee27c-9b54-4d6a-af33-e23eae7903bd)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "C9") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "power:GND") (at 45.72 76.2 0) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid d2d03453-a471-47e3-b8a0-21c302ee4b55) - (property "Reference" "#PWR0101" (at 45.72 82.55 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Value" "GND" (at 45.72 81.28 0) - (effects (font (size 1.27 1.27))) - ) - (property "Footprint" "" (at 45.72 76.2 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "" (at 45.72 76.2 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "1" (uuid d5bd19b3-cf01-497e-9f3d-63ee2e537d2d)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "#PWR0101") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Connector:Conn_01x01_Pin") (at 152.4 66.04 0) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid dc9beee8-362a-431f-ae58-61cdcb6832dc) - (property "Reference" "GND_A1" (at 152.4 66.04 0) - (effects (font (size 1.27 1.27)) (justify right)) - ) - (property "Value" "Conn_01x01_Pin" (at 151.765 67.31 90) - (effects (font (size 1.27 1.27)) (justify right) hide) - ) - (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" (at 152.4 66.04 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 152.4 66.04 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "1" (uuid 384d9e59-0cf8-4a8b-8799-c7ed8eb90760)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "GND_A1") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Device:R") (at 64.77 40.64 0) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid dffbb023-66a6-4908-bab6-7170bcf5a1bb) - (property "Reference" "R18" (at 64.77 36.83 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Value" "47K" (at 64.77 44.45 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 62.992 40.64 90) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 64.77 40.64 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "2" (uuid d03037c0-1efd-4222-9884-4ef4e95956c7)) - (pin "1" (uuid 18557c98-42f0-44bd-8418-c4ad8636e6c1)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "R18") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "OPA1642AID:OPA1642AID") (at 81.28 91.44 0) (mirror x) (unit 2) - (in_bom yes) (on_board yes) (dnp no) - (uuid e46d3b5f-0bed-4df1-a7ff-7fb3e0496ac5) - (property "Reference" "IC2" (at 82.55 87.63 0) - (effects (font (size 1.27 1.27))) - ) - (property "Value" "OPA1642AID" (at 86.36 95.25 0) - (effects (font (size 1.27 1.27))) - ) - (property "Footprint" "opa1642:SOIC127P600X175-8N" (at 81.28 91.44 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "Datasheet" "" (at 81.28 91.44 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "MF" "Texas Instruments" (at 81.28 91.44 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "MAXIMUM_PACKAGE_HEIGHT" "1.75 mm" (at 81.28 91.44 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "Package" "SOIC-8 Texas Instruments" (at 81.28 91.44 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "Price" "None" (at 81.28 91.44 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "Check_prices" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=eda" (at 81.28 91.44 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "STANDARD" "IPC 7351B" (at 81.28 91.44 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "PARTREV" "D" (at 81.28 91.44 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "SnapEDA_Link" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=snap" (at 81.28 91.44 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "MP" "OPA1642AID" (at 81.28 91.44 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "Description" "\n \n Dual SoundPlus™ high-performance, JFET-input audio op amp\n \n" (at 81.28 91.44 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "Availability" "In Stock" (at 81.28 91.44 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (property "MANUFACTURER" "Texas Instruments" (at 81.28 91.44 0) - (effects (font (size 1.27 1.27)) (justify bottom) hide) - ) - (pin "1" (uuid 8eb7a723-ff49-4e64-bcff-d54dedebf6df)) - (pin "7" (uuid c8f04e9e-37cd-44d0-befd-fa1c054349ef)) - (pin "4" (uuid 5ea9edc8-d7e5-498d-a5e1-f4d8f0e59842)) - (pin "2" (uuid 223a6f4e-dc79-479d-8844-0b96b300e0c7)) - (pin "6" (uuid c36582c0-b02a-453d-9f70-9abbd6fba04b)) - (pin "8" (uuid 30ff56b3-f2da-4beb-89d7-da61228bd145)) - (pin "3" (uuid bf170eff-2b68-464c-8e53-81064b7f76b2)) - (pin "5" (uuid 1c1b288a-a713-40eb-8869-436701df4af8)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "IC2") (unit 2) - ) - ) - ) - ) - - (symbol (lib_id "power:GND") (at 250.19 102.87 0) (unit 1) - (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced) - (uuid e53bcdf9-738a-48e4-a152-a14a08270ebd) - (property "Reference" "#PWR0114" (at 250.19 109.22 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Value" "GND" (at 250.19 107.95 0) - (effects (font (size 1.27 1.27))) - ) - (property "Footprint" "" (at 250.19 102.87 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "" (at 250.19 102.87 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "1" (uuid c624e79d-a3f3-4f3c-98ab-5bbe94e84744)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "#PWR0114") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Device:R") (at 247.65 66.04 90) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid e7bc09ca-c05b-46b5-a6ac-36183d8d76a3) - (property "Reference" "R2" (at 242.57 67.31 90) - (effects (font (size 1.27 1.27))) - ) - (property "Value" "47" (at 251.46 67.31 90) - (effects (font (size 1.27 1.27))) - ) - (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 247.65 67.818 90) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 247.65 66.04 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "2" (uuid 811bcd25-7683-450d-a0f6-4cbf30fe16d7)) - (pin "1" (uuid b446f901-9264-4de1-a7f4-e94b77c4b7a7)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "R2") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Device:C_Polarized") (at 176.53 38.1 0) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid e99cf364-578f-476c-924e-844a1b1a8e85) - (property "Reference" "C7" (at 176.53 35.56 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Value" "47uF 35v" (at 171.45 40.64 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Footprint" "C47u35v:CAPPRD200W50D525H1250" (at 177.4952 41.91 0) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 176.53 38.1 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "2" (uuid 7fbc65c4-a622-4af7-8427-e54f1f86ba89)) - (pin "1" (uuid 02fe146f-014e-4c3e-acf4-171e7ba0e1ca)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "C7") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Device:R") (at 105.41 40.64 0) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid ecfd7613-45e7-4949-88b5-f33fd1e3a59e) - (property "Reference" "R15" (at 105.41 36.83 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Value" "200" (at 105.41 44.45 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 103.632 40.64 90) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 105.41 40.64 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "2" (uuid ca1d0729-2505-4402-9f17-357bcc7bb1bb)) - (pin "1" (uuid 0f86676d-62aa-41b0-b91a-cde645257906)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "R15") (unit 1) - ) - ) - ) - ) - - (symbol (lib_id "Device:R") (at 236.22 49.53 0) (unit 1) - (in_bom yes) (on_board yes) (dnp no) - (uuid f8426791-547e-42ff-b8e0-5863e33d65fa) - (property "Reference" "R3" (at 236.22 45.72 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Value" "2.2K" (at 236.22 53.34 0) - (effects (font (size 1.27 1.27)) (justify left)) - ) - (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 234.442 49.53 90) - (effects (font (size 1.27 1.27)) hide) - ) - (property "Datasheet" "~" (at 236.22 49.53 0) - (effects (font (size 1.27 1.27)) hide) - ) - (pin "2" (uuid 316da01b-6ffd-488d-82e6-871c663cd358)) - (pin "1" (uuid cab12070-cd00-4eeb-aa04-57f317411ced)) - (instances - (project "retro" - (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" - (reference "R3") (unit 1) - ) - ) - ) - ) - - (sheet_instances - (path "/" (page "1")) - ) -) +(kicad_sch (version 20250114) (generator "eeschema") (generator_version "9.0") (uuid "dde26cd9-6a98-439e-b5e9-17da5761ec2e") (paper "A4") (lib_symbols (symbol "Connector:Conn_01x01_Pin" (pin_names (offset 1.016) (hide yes)) (exclude_from_sim no) (in_bom yes) (on_board yes) (property "Reference" "J" (at 0 2.54 0) (effects (font (size 1.27 1.27)))) (property "Value" "Conn_01x01_Pin" (at 0 -2.54 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "Generic connector, single row, 01x01, script generated" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "ki_locked" "" (at 0 0 0) (effects (font (size 1.27 1.27)))) (property "ki_keywords" "connector" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "ki_fp_filters" "Connector*:*_1x??_*" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (symbol "Conn_01x01_Pin_1_1" (rectangle (start 0.8636 0.127) (end 0 -0.127) (stroke (width 0.1524) (type default)) (fill (type outline))) (polyline (pts (xy 1.27 0) (xy 0.8636 0)) (stroke (width 0.1524) (type default)) (fill (type none))) (pin passive line (at 5.08 0 180) (length 3.81) (name "Pin_1" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27)))))) (embedded_fonts no)) (symbol "Connector_Generic:Conn_01x01" (pin_names (offset 1.016) (hide yes)) (exclude_from_sim no) (in_bom yes) (on_board yes) (property "Reference" "J" (at 0 2.54 0) (effects (font (size 1.27 1.27)))) (property "Value" "Conn_01x01" (at 0 -2.54 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "Generic connector, single row, 01x01, script generated (kicad-library-utils/schlib/autogen/connector/)" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "ki_keywords" "connector" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "ki_fp_filters" "Connector*:*_1x??_*" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (symbol "Conn_01x01_1_1" (rectangle (start -1.27 1.27) (end 1.27 -1.27) (stroke (width 0.254) (type default)) (fill (type background))) (rectangle (start -1.27 0.127) (end 0 -0.127) (stroke (width 0.1524) (type default)) (fill (type none))) (pin passive line (at -5.08 0 0) (length 3.81) (name "Pin_1" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27)))))) (embedded_fonts no)) (symbol "Device:C" (pin_numbers (hide yes)) (pin_names (offset 0.254)) (exclude_from_sim no) (in_bom yes) (on_board yes) (property "Reference" "C" (at 0.635 2.54 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "C" (at 0.635 -2.54 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "" (at 0.9652 -3.81 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "Unpolarized capacitor" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "ki_keywords" "cap capacitor" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "ki_fp_filters" "C_*" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (symbol "C_0_1" (polyline (pts (xy -2.032 0.762) (xy 2.032 0.762)) (stroke (width 0.508) (type default)) (fill (type none))) (polyline (pts (xy -2.032 -0.762) (xy 2.032 -0.762)) (stroke (width 0.508) (type default)) (fill (type none)))) (symbol "C_1_1" (pin passive line (at 0 3.81 270) (length 2.794) (name "~" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27))))) (pin passive line (at 0 -3.81 90) (length 2.794) (name "~" (effects (font (size 1.27 1.27)))) (number "2" (effects (font (size 1.27 1.27)))))) (embedded_fonts no)) (symbol "Device:C_Polarized" (pin_numbers (hide yes)) (pin_names (offset 0.254)) (exclude_from_sim no) (in_bom yes) (on_board yes) (property "Reference" "C" (at 0.635 2.54 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "C_Polarized" (at 0.635 -2.54 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "" (at 0.9652 -3.81 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "Polarized capacitor" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "ki_keywords" "cap capacitor" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "ki_fp_filters" "CP_*" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (symbol "C_Polarized_0_1" (rectangle (start -2.286 0.508) (end 2.286 1.016) (stroke (width 0) (type default)) (fill (type none))) (polyline (pts (xy -1.778 2.286) (xy -0.762 2.286)) (stroke (width 0) (type default)) (fill (type none))) (polyline (pts (xy -1.27 2.794) (xy -1.27 1.778)) (stroke (width 0) (type default)) (fill (type none))) (rectangle (start 2.286 -0.508) (end -2.286 -1.016) (stroke (width 0) (type default)) (fill (type outline)))) (symbol "C_Polarized_1_1" (pin passive line (at 0 3.81 270) (length 2.794) (name "~" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27))))) (pin passive line (at 0 -3.81 90) (length 2.794) (name "~" (effects (font (size 1.27 1.27)))) (number "2" (effects (font (size 1.27 1.27)))))) (embedded_fonts no)) (symbol "Device:D" (pin_numbers (hide yes)) (pin_names (offset 1.016) (hide yes)) (exclude_from_sim no) (in_bom yes) (on_board yes) (property "Reference" "D" (at 0 2.54 0) (effects (font (size 1.27 1.27)))) (property "Value" "D" (at 0 -2.54 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "Diode" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Sim.Device" "D" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Sim.Pins" "1=K 2=A" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "ki_keywords" "diode" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "ki_fp_filters" "TO-???* *_Diode_* *SingleDiode* D_*" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (symbol "D_0_1" (polyline (pts (xy -1.27 1.27) (xy -1.27 -1.27)) (stroke (width 0.254) (type default)) (fill (type none))) (polyline (pts (xy 1.27 1.27) (xy 1.27 -1.27) (xy -1.27 0) (xy 1.27 1.27)) (stroke (width 0.254) (type default)) (fill (type none))) (polyline (pts (xy 1.27 0) (xy -1.27 0)) (stroke (width 0) (type default)) (fill (type none)))) (symbol "D_1_1" (pin passive line (at -3.81 0 0) (length 2.54) (name "K" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27))))) (pin passive line (at 3.81 0 180) (length 2.54) (name "A" (effects (font (size 1.27 1.27)))) (number "2" (effects (font (size 1.27 1.27)))))) (embedded_fonts no)) (symbol "Device:R" (pin_numbers (hide yes)) (pin_names (offset 0)) (exclude_from_sim no) (in_bom yes) (on_board yes) (property "Reference" "R" (at 2.032 0 90) (effects (font (size 1.27 1.27)))) (property "Value" "R" (at 0 0 90) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at -1.778 0 90) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "Resistor" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "ki_keywords" "R res resistor" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "ki_fp_filters" "R_*" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (symbol "R_0_1" (rectangle (start -1.016 -2.54) (end 1.016 2.54) (stroke (width 0.254) (type default)) (fill (type none)))) (symbol "R_1_1" (pin passive line (at 0 3.81 270) (length 1.27) (name "~" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27))))) (pin passive line (at 0 -3.81 90) (length 1.27) (name "~" (effects (font (size 1.27 1.27)))) (number "2" (effects (font (size 1.27 1.27)))))) (embedded_fonts no)) (symbol "OPA1642AID:OPA1642AID" (pin_names (offset 1.016)) (exclude_from_sim no) (in_bom yes) (on_board yes) (property "Reference" "U" (at 2.54 3.175 0) (effects (font (size 1.27 1.27)) (justify left bottom))) (property "Value" "OPA1642AID" (at 2.54 -5.08 0) (effects (font (size 1.27 1.27)) (justify left bottom))) (property "Footprint" "OPA1642AID:SOIC127P599X175-8N" (at 0 0 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "Datasheet" "" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "Dual SoundPlus™ high-performance, JFET-input audio op amp" (at 0 0 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "MF" "Texas Instruments" (at 0 0 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "MAXIMUM_PACKAGE_HEIGHT" "1.75 mm" (at 0 0 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "Package" "SOIC-8 Texas Instruments" (at 0 0 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "Price" "None" (at 0 0 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "Check_prices" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=eda" (at 0 0 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "STANDARD" "IPC 7351B" (at 0 0 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "PARTREV" "D" (at 0 0 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "SnapEDA_Link" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=snap" (at 0 0 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "MP" "OPA1642AID" (at 0 0 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "Availability" "In Stock" (at 0 0 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "MANUFACTURER" "Texas Instruments" (at 0 0 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (symbol "OPA1642AID_1_0" (polyline (pts (xy -5.08 5.08) (xy -5.08 -5.08)) (stroke (width 0.4064) (type default)) (fill (type none))) (polyline (pts (xy -5.08 -5.08) (xy 5.08 0)) (stroke (width 0.4064) (type default)) (fill (type none))) (polyline (pts (xy -4.445 2.54) (xy -3.175 2.54)) (stroke (width 0.1524) (type default)) (fill (type none))) (polyline (pts (xy -4.445 -2.54) (xy -3.175 -2.54)) (stroke (width 0.1524) (type default)) (fill (type none))) (polyline (pts (xy -3.81 -1.905) (xy -3.81 -3.175)) (stroke (width 0.1524) (type default)) (fill (type none))) (polyline (pts (xy 5.08 0) (xy -5.08 5.08)) (stroke (width 0.4064) (type default)) (fill (type none))) (text "V+" (at 1.27 3.175 900) (effects (font (size 0.8128 0.8128)) (justify left bottom))) (text "V-" (at 1.27 -4.826 900) (effects (font (size 0.8128 0.8128)) (justify left bottom))) (pin input line (at -10.16 2.54 0) (length 5.08) (name "~" (effects (font (size 1.016 1.016)))) (number "2" (effects (font (size 1.016 1.016))))) (pin input line (at -10.16 -2.54 0) (length 5.08) (name "~" (effects (font (size 1.016 1.016)))) (number "3" (effects (font (size 1.016 1.016))))) (pin power_in line (at 0 7.62 270) (length 5.08) (name "~" (effects (font (size 1.016 1.016)))) (number "8" (effects (font (size 1.016 1.016))))) (pin power_in line (at 0 -7.62 90) (length 5.08) (name "~" (effects (font (size 1.016 1.016)))) (number "4" (effects (font (size 1.016 1.016))))) (pin output line (at 10.16 0 180) (length 5.08) (name "~" (effects (font (size 1.016 1.016)))) (number "1" (effects (font (size 1.016 1.016)))))) (symbol "OPA1642AID_2_0" (polyline (pts (xy -5.08 5.08) (xy -5.08 -5.08)) (stroke (width 0.4064) (type default)) (fill (type none))) (polyline (pts (xy -5.08 -5.08) (xy 5.08 0)) (stroke (width 0.4064) (type default)) (fill (type none))) (polyline (pts (xy -4.445 2.54) (xy -3.175 2.54)) (stroke (width 0.1524) (type default)) (fill (type none))) (polyline (pts (xy -4.445 -2.54) (xy -3.175 -2.54)) (stroke (width 0.1524) (type default)) (fill (type none))) (polyline (pts (xy -3.81 -1.905) (xy -3.81 -3.175)) (stroke (width 0.1524) (type default)) (fill (type none))) (polyline (pts (xy 5.08 0) (xy -5.08 5.08)) (stroke (width 0.4064) (type default)) (fill (type none))) (pin input line (at -10.16 2.54 0) (length 5.08) (name "~" (effects (font (size 1.016 1.016)))) (number "6" (effects (font (size 1.016 1.016))))) (pin input line (at -10.16 -2.54 0) (length 5.08) (name "~" (effects (font (size 1.016 1.016)))) (number "5" (effects (font (size 1.016 1.016))))) (pin output line (at 10.16 0 180) (length 5.08) (name "~" (effects (font (size 1.016 1.016)))) (number "7" (effects (font (size 1.016 1.016)))))) (embedded_fonts no)) (symbol "power:Earth" (power) (pin_names (offset 0)) (exclude_from_sim no) (in_bom yes) (on_board yes) (property "Reference" "#PWR" (at 0 -6.35 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Value" "Earth" (at 0 -3.81 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "Power symbol creates a global label with name \"Earth\"" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "ki_keywords" "global ground gnd" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (symbol "Earth_0_1" (polyline (pts (xy -0.635 -1.905) (xy 0.635 -1.905)) (stroke (width 0) (type default)) (fill (type none))) (polyline (pts (xy -0.127 -2.54) (xy 0.127 -2.54)) (stroke (width 0) (type default)) (fill (type none))) (polyline (pts (xy 0 -1.27) (xy 0 0)) (stroke (width 0) (type default)) (fill (type none))) (polyline (pts (xy 1.27 -1.27) (xy -1.27 -1.27)) (stroke (width 0) (type default)) (fill (type none)))) (symbol "Earth_1_1" (pin power_in line (at 0 0 270) (length 0) (hide yes) (name "Earth" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27)))))) (embedded_fonts no)) (symbol "power:GND" (power) (pin_names (offset 0)) (exclude_from_sim no) (in_bom yes) (on_board yes) (property "Reference" "#PWR" (at 0 -6.35 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Value" "GND" (at 0 -3.81 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "Power symbol creates a global label with name \"GND\" , ground" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "ki_keywords" "global power" (at 0 0 0) (effects (font (size 1.27 1.27)) (hide yes))) (symbol "GND_0_1" (polyline (pts (xy 0 0) (xy 0 -1.27) (xy 1.27 -1.27) (xy 0 -2.54) (xy -1.27 -1.27) (xy 0 -1.27)) (stroke (width 0) (type default)) (fill (type none)))) (symbol "GND_1_1" (pin power_in line (at 0 0 270) (length 0) (hide yes) (name "GND" (effects (font (size 1.27 1.27)))) (number "1" (effects (font (size 1.27 1.27)))))) (embedded_fonts no))) (text "Cabler par NUMERO DE PIN, jamais par position visuelle. Topologie AliceOPA = suiveur (IC*A) + inverseur unitaire (IC*B). Ref DJJules." (exclude_from_sim no) (at 100 25 0) (effects (font (size 1.524 1.524)) (justify left bottom)) (uuid "2f27fc85-2db6-4634-b1d0-556b6bfa00eb")) (text "ATTENTION OPA1642AID (SnapEDA): + IN visuellement EN BAS (pin 3 sur IC*A, pin 5 sur IC*B), - IN EN HAUT (pin 2 sur IC*A, pin 6 sur IC*B)" (exclude_from_sim no) (at 100 22 0) (effects (font (size 1.524 1.524)) (justify left bottom)) (uuid "7f6c91a7-1382-4a57-98af-ac6239f97a4c")) (text "canal B (IC2)" (exclude_from_sim no) (at 41 78 0) (effects (font (size 1.524 1.524)) (justify left bottom)) (uuid "da0e6047-9e2c-4cb3-ab71-41d772680403")) (text "canal A (IC1)" (exclude_from_sim no) (at 167 78 0) (effects (font (size 1.524 1.524)) (justify left bottom)) (uuid "fe8aecfd-5870-4d86-a294-78b949670c9c")) (junction (at 176.53 33.02) (diameter 0) (color 0 0 0 0) (uuid "00589357-8e78-4b48-ae28-55a325e7e60d")) (junction (at 57.15 34.29) (diameter 0) (color 0 0 0 0) (uuid "09588201-8b42-44b7-819e-c8f5ab4dc089")) (junction (at 64.77 34.29) (diameter 0) (color 0 0 0 0) (uuid "16b0b64c-300f-48e4-b5e3-6530295f7432")) (junction (at 110.49 45.72) (diameter 0) (color 0 0 0 0) (uuid "1fedaa26-68d8-43e0-9f71-7347c3987ea2")) (junction (at 105.41 67.31) (diameter 0) (color 0 0 0 0) (uuid "2197faeb-7074-4b3f-b0ae-c0c6950c6115")) (junction (at 182.88 33.02) (diameter 0) (color 0 0 0 0) (uuid "22226dcb-761d-4e21-8926-5e3e670d73b4")) (junction (at 190.5 33.02) (diameter 0) (color 0 0 0 0) (uuid "2b758264-7c69-4e0c-93be-2efbcb50a2c0")) (junction (at 92.71 91.44) (diameter 0) (color 0 0 0 0) (uuid "2e7b2632-ec2f-4541-8baa-fe7738ac00ce")) (junction (at 130.81 102.87) (diameter 0) (color 0 0 0 0) (uuid "31a0fa79-136a-44fe-886c-461ed761bcd9")) (junction (at 246.38 44.45) (diameter 0) (color 0 0 0 0) (uuid "34017a92-c9bf-47c6-82c9-f179df22de8e")) (junction (at 69.85 48.26) (diameter 0) (color 0 0 0 0) (uuid "3a063535-13d8-4452-8527-87ecc8b8bafd")) (junction (at 218.44 90.17) (diameter 0) (color 0 0 0 0) (uuid "506c6fe0-54fc-4644-b472-af2712a66982")) (junction (at 50.8 34.29) (diameter 0) (color 0 0 0 0) (uuid "52d16d23-5d99-4997-9606-6a432c5ed42c")) (junction (at 110.49 91.44) (diameter 0) (color 0 0 0 0) (uuid "6e7975c6-e34f-49fe-8979-b54dde5b3afa")) (junction (at 135.89 45.72) (diameter 0) (color 0 0 0 0) (uuid "7143fe68-cd97-4817-ad2c-119aed5e1e98")) (junction (at 219.71 96.52) (diameter 0) (color 0 0 0 0) (uuid "72610660-92b2-4c67-9420-a83a3b6c5fe8")) (junction (at 160.02 63.5) (diameter 0) (color 0 0 0 0) (uuid "7c17383d-56a7-44e5-a84d-f9087e67706a")) (junction (at 254 44.45) (diameter 0) (color 0 0 0 0) (uuid "8b6bfe60-3dc6-4264-96f7-e3717e7adb54")) (junction (at 250.19 101.6) (diameter 0) (color 0 0 0 0) (uuid "8c585ad5-91e8-4583-b2d8-0474483941bd")) (junction (at 130.81 134.62) (diameter 0) (color 0 0 0 0) (uuid "9028dbdb-828c-44c9-8913-4012ea279758")) (junction (at 128.27 102.87) (diameter 0) (color 0 0 0 0) (uuid "94ec2774-6ecc-4c4c-8ff7-25af5bc253b2")) (junction (at 254 101.6) (diameter 0) (color 0 0 0 0) (uuid "96a9a85d-09cd-4d8c-a932-99a3f6e299fa")) (junction (at 261.62 44.45) (diameter 0) (color 0 0 0 0) (uuid "9e1c806d-87fc-406a-a639-bcaeb441f29f")) (junction (at 190.5 46.99) (diameter 0) (color 0 0 0 0) (uuid "a2e2e3ef-4659-4007-b817-ded43a82b6ad")) (junction (at 231.14 44.45) (diameter 0) (color 0 0 0 0) (uuid "a7f346ae-f212-4dac-bed0-b846ad63e47e")) (junction (at 105.41 45.72) (diameter 0) (color 0 0 0 0) (uuid "ac48b7f1-5297-4449-ba90-97fe45c07c15")) (junction (at 231.14 66.04) (diameter 0) (color 0 0 0 0) (uuid "b77b5e27-f925-4c66-b4ba-d614a7032f1a")) (junction (at 171.45 33.02) (diameter 0) (color 0 0 0 0) (uuid "bb063fe2-6534-4b28-99e0-da8d833215b1")) (junction (at 64.77 48.26) (diameter 0) (color 0 0 0 0) (uuid "be418af7-2d0e-41ac-a848-fa5787a5fcd0")) (junction (at 45.72 34.29) (diameter 0) (color 0 0 0 0) (uuid "c31e8219-696e-409a-8d87-dadc8b1a0d37")) (junction (at 93.98 97.79) (diameter 0) (color 0 0 0 0) (uuid "c5697ae5-e8d7-4567-96b2-c46c35186d3b")) (junction (at 195.58 46.99) (diameter 0) (color 0 0 0 0) (uuid "d20ebbb5-9e1b-439e-9109-a96a9c0da384")) (junction (at 128.27 45.72) (diameter 0) (color 0 0 0 0) (uuid "d3939fce-7f5c-4b01-af8c-43fdf06aa9b4")) (junction (at 236.22 44.45) (diameter 0) (color 0 0 0 0) (uuid "e1d9b8d6-2f6b-46b2-a5d7-a46c5f27b3ba")) (junction (at 34.29 64.77) (diameter 0) (color 0 0 0 0) (uuid "e991ca0a-385e-45f3-b8db-5c612be6f19d")) (junction (at 236.22 90.17) (diameter 0) (color 0 0 0 0) (uuid "eaa05d34-930c-4892-b0e5-6ea6106cf656")) (junction (at 120.65 45.72) (diameter 0) (color 0 0 0 0) (uuid "f4b65052-dac7-4f36-bf7c-48aa76d3179f")) (junction (at 194.31 81.28) (diameter 0) (color 0 0 0 0) (uuid "fb68e80d-0477-432b-9927-a247553d8d2d")) (junction (at 68.58 82.55) (diameter 0) (color 0 0 0 0) (uuid "ffa8159e-09d6-41df-8412-f708e67ac562")) (wire (pts (xy 132.08 92.71) (xy 133.35 92.71)) (stroke (width 0) (type default)) (uuid "02ffd185-3759-49b3-8c77-2e0613d4dfc1")) (wire (pts (xy 133.35 67.31) (xy 125.73 67.31)) (stroke (width 0) (type default)) (uuid "0356e5f5-98e0-41ac-986a-3a5c50e15865")) (wire (pts (xy 171.45 73.66) (xy 171.45 74.93)) (stroke (width 0) (type default)) (uuid "04fa697f-ba4f-4896-9ec8-bc29f296ab27")) (wire (pts (xy 261.62 45.72) (xy 261.62 44.45)) (stroke (width 0) (type default)) (uuid "054de042-36c6-466d-addf-52404f9a5cf5")) (wire (pts (xy 132.08 91.44) (xy 125.73 91.44)) (stroke (width 0) (type default)) (uuid "07f957aa-8cbd-46c5-b269-0dd7732ae0b0")) (wire (pts (xy 86.36 82.55) (xy 92.71 82.55)) (stroke (width 0) (type default)) (uuid "091a8572-79a5-4536-b85d-bab77e5807f6")) (wire (pts (xy 196.85 92.71) (xy 194.31 92.71)) (stroke (width 0) (type default)) (uuid "0948c5ac-1f77-48ec-94a4-0f80cc03c66a")) (wire (pts (xy 64.77 36.83) (xy 64.77 34.29)) (stroke (width 0) (type default)) (uuid "09bff6a2-4405-4b1c-b1c7-8770f1b83251")) (wire (pts (xy 110.49 54.61) (xy 110.49 91.44)) (stroke (width 0) (type default)) (uuid "0a92ccac-a9ba-41ec-9130-6efa152b8c7c")) (wire (pts (xy 120.65 45.72) (xy 128.27 45.72)) (stroke (width 0) (type default)) (uuid "0c093a6d-daaf-49d0-915e-5c6ba985c32f")) (wire (pts (xy 71.12 93.98) (xy 68.58 93.98)) (stroke (width 0) (type default)) (uuid "0c103657-0555-49c9-8325-2766ddb6c34f")) (wire (pts (xy 254 101.6) (xy 254 102.87)) (stroke (width 0) (type default)) (uuid "0c5e5cac-35ca-4a13-9be1-b006870f52be")) (wire (pts (xy 182.88 41.91) (xy 182.88 43.18)) (stroke (width 0) (type default)) (uuid "0cce7c82-3eb4-4b62-871a-55f7b76e03fa")) (wire (pts (xy 30.48 67.31) (xy 33.02 67.31)) (stroke (width 0) (type default)) (uuid "0d2f807f-742b-4768-94ba-95a2e0dbb27e")) (wire (pts (xy 194.31 92.71) (xy 194.31 81.28)) (stroke (width 0) (type default)) (uuid "0dcc1259-f63a-4cdb-8738-f5795f1b3254")) (wire (pts (xy 160.02 49.53) (xy 160.02 46.99)) (stroke (width 0) (type default)) (uuid "0e08d303-8030-47a4-80b3-c8e23305f124")) (wire (pts (xy 135.89 68.58) (xy 135.89 121.92)) (stroke (width 0) (type default)) (uuid "0ecd9114-c5f3-41b1-bbaf-d0bf23bf8c72")) (wire (pts (xy 69.85 88.9) (xy 69.85 48.26)) (stroke (width 0) (type default)) (uuid "0f14fdbd-45c6-4587-9179-a25b05c2e830")) (wire (pts (xy 110.49 46.99) (xy 110.49 45.72)) (stroke (width 0) (type default)) (uuid "12318da3-5c3c-4ee8-be25-587a325bb671")) (wire (pts (xy 60.96 78.74) (xy 60.96 67.31)) (stroke (width 0) (type default)) (uuid "138e04ba-8341-4806-8646-083545aec23c")) (wire (pts (xy 130.81 102.87) (xy 130.81 134.62)) (stroke (width 0) (type default)) (uuid "14914217-99a2-4d1d-a175-3837138c9f9d")) (wire (pts (xy 190.5 43.18) (xy 190.5 46.99)) (stroke (width 0) (type default)) (uuid "149d755e-650f-464a-b013-2877ffe94d53")) (wire (pts (xy 167.64 33.02) (xy 167.64 34.29)) (stroke (width 0) (type default)) (uuid "1612cd4b-7389-451b-b032-7c60262b86ba")) (wire (pts (xy 158.75 96.52) (xy 158.75 66.04)) (stroke (width 0) (type default)) (uuid "17c7e460-170d-43ec-9eda-22024b3b9d49")) (wire (pts (xy 175.26 80.01) (xy 184.15 80.01)) (stroke (width 0) (type default)) (uuid "186588e2-1b6c-4fc6-b4ab-2a2de861743d")) (wire (pts (xy 64.77 44.45) (xy 64.77 48.26)) (stroke (width 0) (type default)) (uuid "19585c84-7781-4da6-b4c5-c2bb13cc74af")) (wire (pts (xy 195.58 46.99) (xy 219.71 46.99)) (stroke (width 0) (type default)) (uuid "1eba57e1-ae3d-47e1-9db3-7eb057abc06d")) (wire (pts (xy 93.98 48.26) (xy 93.98 49.53)) (stroke (width 0) (type default)) (uuid "1f841559-9f10-4f15-a62a-5f8e9b558097")) (wire (pts (xy 30.48 64.77) (xy 34.29 64.77)) (stroke (width 0) (type default)) (uuid "1f90ebaf-5381-4215-87a7-0678b5409152")) (wire (pts (xy 181.61 66.04) (xy 220.98 66.04)) (stroke (width 0) (type default)) (uuid "20e1f14e-246f-408b-9bc9-45a3480af913")) (wire (pts (xy 246.38 44.45) (xy 254 44.45)) (stroke (width 0) (type default)) (uuid "22cb0afe-5c07-4150-8264-9d54a11f4480")) (wire (pts (xy 45.72 34.29) (xy 41.91 34.29)) (stroke (width 0) (type default)) (uuid "2373e140-4aee-4605-bb6d-a1aa0003ca85")) (wire (pts (xy 92.71 82.55) (xy 92.71 91.44)) (stroke (width 0) (type default)) (uuid "2387ac61-6080-40df-9809-adfa32c9436d")) (wire (pts (xy 267.97 45.72) (xy 267.97 44.45)) (stroke (width 0) (type default)) (uuid "24a76783-3bad-4ee9-aefe-a83c1207056d")) (wire (pts (xy 130.81 134.62) (xy 130.81 135.89)) (stroke (width 0) (type default)) (uuid "2640e604-e51f-4854-b146-214b7487dbf8")) (wire (pts (xy 245.11 101.6) (xy 250.19 101.6)) (stroke (width 0) (type default)) (uuid "2995443d-90a6-43a8-a5f9-059384375554")) (wire (pts (xy 64.77 48.26) (xy 64.77 49.53)) (stroke (width 0) (type default)) (uuid "2a885e5e-7d91-4b49-82e4-0cb3564efb77")) (wire (pts (xy 105.41 67.31) (xy 118.11 67.31)) (stroke (width 0) (type default)) (uuid "2b091d4b-29fd-474e-baf6-eb6d449ae010")) (wire (pts (xy 231.14 43.18) (xy 231.14 44.45)) (stroke (width 0) (type default)) (uuid "2b42269e-c0f6-4ee1-a79a-ed49f1b423bc")) (wire (pts (xy 261.62 44.45) (xy 254 44.45)) (stroke (width 0) (type default)) (uuid "2e57848c-6b0d-4203-afc5-11e7b17d4656")) (wire (pts (xy 231.14 66.04) (xy 243.84 66.04)) (stroke (width 0) (type default)) (uuid "2f88aafa-1904-4b74-8678-eaf51e21ff15")) (wire (pts (xy 110.49 45.72) (xy 120.65 45.72)) (stroke (width 0) (type default)) (uuid "307b7763-560b-4081-a5b0-4d9432cf7c90")) (wire (pts (xy 142.24 46.99) (xy 142.24 45.72)) (stroke (width 0) (type default)) (uuid "3258f2e1-c35e-4c31-b4e2-df37c4b55397")) (wire (pts (xy 92.71 91.44) (xy 95.25 91.44)) (stroke (width 0) (type default)) (uuid "33dc630f-6894-453f-ba6d-227a76c7dfb7")) (wire (pts (xy 105.41 54.61) (xy 105.41 67.31)) (stroke (width 0) (type default)) (uuid "343dcd1d-c956-4e75-b567-a0342845ebaf")) (wire (pts (xy 133.35 92.71) (xy 133.35 121.92)) (stroke (width 0) (type default)) (uuid "3502f113-0881-4463-86a6-57a628a4d65c")) (wire (pts (xy 171.45 33.02) (xy 167.64 33.02)) (stroke (width 0) (type default)) (uuid "36b94fa8-f95c-4830-b262-b1f0930cdfec")) (wire (pts (xy 105.41 34.29) (xy 105.41 36.83)) (stroke (width 0) (type default)) (uuid "3f2a71ad-7543-4d78-ace7-ec7c6a72ede5")) (wire (pts (xy 250.19 101.6) (xy 254 101.6)) (stroke (width 0) (type default)) (uuid "3fec9f90-1e3f-4ac1-af8d-3c01828ca098")) (wire (pts (xy 142.24 45.72) (xy 135.89 45.72)) (stroke (width 0) (type default)) (uuid "44f75a8f-3922-464d-a9cb-247c27a22aaf")) (wire (pts (xy 246.38 53.34) (xy 246.38 54.61)) (stroke (width 0) (type default)) (uuid "46b0c5b1-32e8-4b1f-a59f-9361200bbe71")) (wire (pts (xy 231.14 33.02) (xy 231.14 35.56)) (stroke (width 0) (type default)) (uuid "46f7a7ce-f6f7-434e-adda-6d0b3c9625db")) (wire (pts (xy 190.5 46.99) (xy 195.58 46.99)) (stroke (width 0) (type default)) (uuid "4ba3aedf-1589-47c6-9ebb-e7f82290d39d")) (wire (pts (xy 195.58 87.63) (xy 195.58 46.99)) (stroke (width 0) (type default)) (uuid "4c8dd0ec-3ab0-447a-baad-4b8912ad9086")) (wire (pts (xy 160.02 46.99) (xy 190.5 46.99)) (stroke (width 0) (type default)) (uuid "4ce29b5f-6b0d-4784-a4b4-2367ea534650")) (wire (pts (xy 182.88 81.28) (xy 194.31 81.28)) (stroke (width 0) (type default)) (uuid "4e5e987c-6db3-4385-bfef-de2b0082abf6")) (wire (pts (xy 257.81 90.17) (xy 251.46 90.17)) (stroke (width 0) (type default)) (uuid "4ee2dd63-ff0d-448c-985c-512662b0677e")) (wire (pts (xy 128.27 46.99) (xy 128.27 45.72)) (stroke (width 0) (type default)) (uuid "5094e56d-01bf-4fbe-9ab6-6e2261a6778c")) (wire (pts (xy 171.45 33.02) (xy 171.45 58.42)) (stroke (width 0) (type default)) (uuid "50c5c928-9226-4ccd-86c8-f441f4c823c0")) (wire (pts (xy 110.49 91.44) (xy 118.11 91.44)) (stroke (width 0) (type default)) (uuid "50d74203-3acf-48ab-9ab4-9cd967bb8eda")) (wire (pts (xy 176.53 33.02) (xy 182.88 33.02)) (stroke (width 0) (type default)) (uuid "5282bfdc-ba1d-49f1-bd41-c878cb71e66f")) (wire (pts (xy 218.44 90.17) (xy 220.98 90.17)) (stroke (width 0) (type default)) (uuid "52d0ae17-05e5-427e-9a4e-f688b490a3d6")) (wire (pts (xy 34.29 50.8) (xy 34.29 48.26)) (stroke (width 0) (type default)) (uuid "54716c51-f35b-4e7a-b401-b965c48846e9")) (wire (pts (xy 120.65 54.61) (xy 120.65 55.88)) (stroke (width 0) (type default)) (uuid "5651c2dd-828f-4db3-b5f0-c2517dfad025")) (wire (pts (xy 195.58 87.63) (xy 196.85 87.63)) (stroke (width 0) (type default)) (uuid "568335cf-e2ea-411d-97a3-ee936bfa35fd")) (wire (pts (xy 93.98 97.79) (xy 130.81 97.79)) (stroke (width 0) (type default)) (uuid "56cfe013-4549-4aed-b51f-fd23cdd4317e")) (wire (pts (xy 254 45.72) (xy 254 44.45)) (stroke (width 0) (type default)) (uuid "57534347-04b0-4ede-a7f5-b7f0614f969c")) (wire (pts (xy 212.09 81.28) (xy 218.44 81.28)) (stroke (width 0) (type default)) (uuid "588917aa-2b57-4704-8692-b6cbddae4b93")) (wire (pts (xy 228.6 66.04) (xy 231.14 66.04)) (stroke (width 0) (type default)) (uuid "5d9b100c-15eb-49b8-99fa-5122b7a9e260")) (wire (pts (xy 236.22 90.17) (xy 243.84 90.17)) (stroke (width 0) (type default)) (uuid "5f3db4a8-9552-4076-91b7-c376c4b9dfd0")) (wire (pts (xy 254 101.6) (xy 256.54 101.6)) (stroke (width 0) (type default)) (uuid "5f97aa97-7bab-43ce-a33c-31d0b7be2ec8")) (wire (pts (xy 45.72 74.93) (xy 45.72 76.2)) (stroke (width 0) (type default)) (uuid "5fd5e64a-f9a8-4402-851f-a357c91335b0")) (wire (pts (xy 256.54 101.6) (xy 256.54 96.52)) (stroke (width 0) (type default)) (uuid "602aee30-db48-4e11-afcd-c2ca5b2c774f")) (wire (pts (xy 133.35 68.58) (xy 135.89 68.58)) (stroke (width 0) (type default)) (uuid "6250034d-badf-4beb-89bb-bd15b05aa371")) (wire (pts (xy 68.58 93.98) (xy 68.58 82.55)) (stroke (width 0) (type default)) (uuid "642834c3-92d1-4978-a38c-9c0073735e66")) (wire (pts (xy 105.41 44.45) (xy 105.41 45.72)) (stroke (width 0) (type default)) (uuid "64a24b07-8240-46c3-904a-a58b493a9ac6")) (wire (pts (xy 261.62 53.34) (xy 261.62 54.61)) (stroke (width 0) (type default)) (uuid "6ecf933a-4006-4cef-a646-a8bc4b3ee0e1")) (wire (pts (xy 182.88 33.02) (xy 190.5 33.02)) (stroke (width 0) (type default)) (uuid "710d1197-a691-45c2-9b2f-d9677797cef6")) (wire (pts (xy 194.31 81.28) (xy 204.47 81.28)) (stroke (width 0) (type default)) (uuid "7214982d-e78f-4016-8929-772d89d4255a")) (wire (pts (xy 218.44 81.28) (xy 218.44 90.17)) (stroke (width 0) (type default)) (uuid "723939a1-81a1-432a-b494-0491488c41c2")) (wire (pts (xy 245.11 134.62) (xy 130.81 134.62)) (stroke (width 0) (type default)) (uuid "73e6a103-d702-4daa-848a-3d8cb790ca5b")) (wire (pts (xy 102.87 91.44) (xy 110.49 91.44)) (stroke (width 0) (type default)) (uuid "7aaab007-f079-408f-9a58-56b5e6c15e7f")) (wire (pts (xy 219.71 46.99) (xy 219.71 48.26)) (stroke (width 0) (type default)) (uuid "7d202f4b-6ae7-41ba-bbf8-91ee9ae9bf11")) (wire (pts (xy 182.88 33.02) (xy 182.88 34.29)) (stroke (width 0) (type default)) (uuid "7fced63a-ef46-42a2-bfa8-88d2d300a113")) (wire (pts (xy 176.53 34.29) (xy 176.53 33.02)) (stroke (width 0) (type default)) (uuid "811fe4ae-4d9e-491d-b0e8-8933950cb5be")) (wire (pts (xy 236.22 45.72) (xy 236.22 44.45)) (stroke (width 0) (type default)) (uuid "839939a7-f516-4162-9624-10f055b5a228")) (wire (pts (xy 259.08 67.31) (xy 261.62 67.31)) (stroke (width 0) (type default)) (uuid "846985e7-c6f1-450f-8a62-94532b5372ec")) (wire (pts (xy 236.22 44.45) (xy 246.38 44.45)) (stroke (width 0) (type default)) (uuid "86addab7-132f-451a-ab53-d65534d1607e")) (wire (pts (xy 160.02 57.15) (xy 160.02 63.5)) (stroke (width 0) (type default)) (uuid "86dc9426-5d58-4a4d-9256-16c899f4d11c")) (wire (pts (xy 64.77 48.26) (xy 69.85 48.26)) (stroke (width 0) (type default)) (uuid "86e24455-dfec-433f-80dc-c39fde419c1e")) (wire (pts (xy 219.71 96.52) (xy 256.54 96.52)) (stroke (width 0) (type default)) (uuid "8856110e-3a32-4b3d-953a-25572067de24")) (wire (pts (xy 128.27 54.61) (xy 128.27 55.88)) (stroke (width 0) (type default)) (uuid "8875669a-09fd-49e3-834b-fb79775a5152")) (wire (pts (xy 41.91 34.29) (xy 41.91 35.56)) (stroke (width 0) (type default)) (uuid "889851f8-9f91-4273-973a-f59b39f0400a")) (wire (pts (xy 190.5 33.02) (xy 190.5 35.56)) (stroke (width 0) (type default)) (uuid "889a9c33-d91a-4548-8507-f801bfafeeed")) (wire (pts (xy 231.14 44.45) (xy 231.14 45.72)) (stroke (width 0) (type default)) (uuid "8f41df4a-75c5-46bc-a8c3-5d3f0148c4ec")) (wire (pts (xy 124.46 102.87) (xy 128.27 102.87)) (stroke (width 0) (type default)) (uuid "8f6ab6b7-67bb-4706-bb66-3d55c8558431")) (wire (pts (xy 64.77 57.15) (xy 64.77 58.42)) (stroke (width 0) (type default)) (uuid "91f76ed0-46c8-4ab3-9260-b06dd9da6255")) (wire (pts (xy 254 53.34) (xy 254 54.61)) (stroke (width 0) (type default)) (uuid "94593297-cfb7-447c-80e6-d6a438491c21")) (wire (pts (xy 105.41 45.72) (xy 110.49 45.72)) (stroke (width 0) (type default)) (uuid "9600660b-ecc2-4c8d-b81b-4cdb5cadd82b")) (wire (pts (xy 157.48 66.04) (xy 158.75 66.04)) (stroke (width 0) (type default)) (uuid "96c16208-2dcf-4069-9c05-8b71bd10214b")) (wire (pts (xy 120.65 46.99) (xy 120.65 45.72)) (stroke (width 0) (type default)) (uuid "99341930-798d-403c-9037-dd18c1735461")) (wire (pts (xy 245.11 101.6) (xy 245.11 134.62)) (stroke (width 0) (type default)) (uuid "994cff41-56e3-4d1c-9d77-b04edd02df9c")) (wire (pts (xy 259.08 66.04) (xy 251.46 66.04)) (stroke (width 0) (type default)) (uuid "9968e922-56e2-42b7-9cd5-b46c4327e31e")) (wire (pts (xy 218.44 90.17) (xy 217.17 90.17)) (stroke (width 0) (type default)) (uuid "99e7c8cb-3f1b-44b4-a5de-c55f0a57bf41")) (wire (pts (xy 102.87 67.31) (xy 105.41 67.31)) (stroke (width 0) (type default)) (uuid "9bdf28dd-1c79-4457-b9a9-d8360885126c")) (wire (pts (xy 93.98 57.15) (xy 93.98 97.79)) (stroke (width 0) (type default)) (uuid "9c4154e7-0da3-4a59-b5bf-3ae7d91d1980")) (wire (pts (xy 219.71 55.88) (xy 219.71 96.52)) (stroke (width 0) (type default)) (uuid "9c8407c3-7408-40f6-bb90-5ea1187f4c4f")) (wire (pts (xy 128.27 102.87) (xy 128.27 104.14)) (stroke (width 0) (type default)) (uuid "9d98a4ab-bba2-4501-a178-3b67b9210367")) (wire (pts (xy 50.8 34.29) (xy 45.72 34.29)) (stroke (width 0) (type default)) (uuid "9e760a6c-d6bf-4d81-9446-72f6d0889c5f")) (wire (pts (xy 34.29 48.26) (xy 64.77 48.26)) (stroke (width 0) (type default)) (uuid "9ea442e9-907a-4d6f-815a-171f8f3da236")) (wire (pts (xy 236.22 53.34) (xy 236.22 90.17)) (stroke (width 0) (type default)) (uuid "a26cbd66-b637-4bd4-bd16-ad289cd2e14a")) (wire (pts (xy 69.85 88.9) (xy 71.12 88.9)) (stroke (width 0) (type default)) (uuid "a304f8bb-9908-43d6-b984-39aa9d3ee6a4")) (wire (pts (xy 176.53 41.91) (xy 176.53 43.18)) (stroke (width 0) (type default)) (uuid "a47dd661-1608-40c6-9128-6ce417a2d5a8")) (wire (pts (xy 135.89 46.99) (xy 135.89 45.72)) (stroke (width 0) (type default)) (uuid "a50010c8-4d90-430d-b26e-d41cba80c5f1")) (wire (pts (xy 135.89 54.61) (xy 135.89 55.88)) (stroke (width 0) (type default)) (uuid "a5913897-6157-43d7-8158-819728b6aeb7")) (wire (pts (xy 176.53 33.02) (xy 171.45 33.02)) (stroke (width 0) (type default)) (uuid "a72433ab-0bb4-44e8-828b-b404a8b0e39b")) (wire (pts (xy 267.97 44.45) (xy 261.62 44.45)) (stroke (width 0) (type default)) (uuid "a75bfeb6-637c-4399-adcc-418096170287")) (wire (pts (xy 190.5 55.88) (xy 190.5 57.15)) (stroke (width 0) (type default)) (uuid "a91be8bc-dcb5-4c37-815d-24c8afe2ef06")) (wire (pts (xy 50.8 43.18) (xy 50.8 44.45)) (stroke (width 0) (type default)) (uuid "adea4fe8-030e-4a40-990b-130d838f0e1b")) (wire (pts (xy 184.15 80.01) (xy 184.15 66.04)) (stroke (width 0) (type default)) (uuid "b4e05642-0d99-468b-9805-cc6901271eb3")) (wire (pts (xy 231.14 53.34) (xy 231.14 66.04)) (stroke (width 0) (type default)) (uuid "b91024ae-8c24-4862-9f88-66259bfd1ec4")) (wire (pts (xy 45.72 34.29) (xy 45.72 59.69)) (stroke (width 0) (type default)) (uuid "b9b1354a-f500-404d-8faa-99b174b6b775")) (wire (pts (xy 92.71 91.44) (xy 91.44 91.44)) (stroke (width 0) (type default)) (uuid "bc758ff1-d4ec-472e-a239-d970b0236044")) (wire (pts (xy 57.15 34.29) (xy 64.77 34.29)) (stroke (width 0) (type default)) (uuid "c037460b-d785-4168-9730-7c0b238c4294")) (wire (pts (xy 49.53 78.74) (xy 60.96 78.74)) (stroke (width 0) (type default)) (uuid "c0654cb0-503a-4347-8895-4dea2a13575a")) (wire (pts (xy 132.08 92.71) (xy 132.08 91.44)) (stroke (width 0) (type default)) (uuid "c0ff053d-a31a-4fbc-9421-b883cb3d23ea")) (wire (pts (xy 105.41 34.29) (xy 64.77 34.29)) (stroke (width 0) (type default)) (uuid "c16969d1-a34b-4675-8a55-ada098db33e2")) (wire (pts (xy 259.08 91.44) (xy 259.08 120.65)) (stroke (width 0) (type default)) (uuid "c1ff8341-84d9-405a-84a6-3b330bc15bb5")) (wire (pts (xy 250.19 101.6) (xy 250.19 102.87)) (stroke (width 0) (type default)) (uuid "c2b51474-800f-4239-a324-8211c5098939")) (wire (pts (xy 257.81 91.44) (xy 259.08 91.44)) (stroke (width 0) (type default)) (uuid "c39a99c3-a5ac-422e-84c4-4a79c5f7d54e")) (wire (pts (xy 55.88 67.31) (xy 95.25 67.31)) (stroke (width 0) (type default)) (uuid "c96d1d4f-4c61-4289-97bd-5d8e1d840722")) (wire (pts (xy 93.98 97.79) (xy 33.02 97.79)) (stroke (width 0) (type default)) (uuid "c9e1b4ce-66e4-4997-b653-40b4aa9cda9f")) (wire (pts (xy 175.26 81.28) (xy 175.26 80.01)) (stroke (width 0) (type default)) (uuid "cc1b1048-e157-4f6e-b41c-1d824105d6ae")) (wire (pts (xy 57.15 43.18) (xy 57.15 44.45)) (stroke (width 0) (type default)) (uuid "cddf18c7-aa13-49b8-86a4-8ca768e1f21d")) (wire (pts (xy 261.62 67.31) (xy 261.62 120.65)) (stroke (width 0) (type default)) (uuid "ce39b7c5-1325-423d-85cf-10c84e601fcb")) (wire (pts (xy 124.46 102.87) (xy 124.46 104.14)) (stroke (width 0) (type default)) (uuid "d3e22f79-5e96-4414-970c-2ee4f5c8be26")) (wire (pts (xy 190.5 33.02) (xy 231.14 33.02)) (stroke (width 0) (type default)) (uuid "d56d1eac-d078-4188-89cd-4d8940b87b7d")) (wire (pts (xy 130.81 102.87) (xy 130.81 97.79)) (stroke (width 0) (type default)) (uuid "d7666022-e4b6-4922-b779-dc8f9cf22fb2")) (wire (pts (xy 135.89 45.72) (xy 128.27 45.72)) (stroke (width 0) (type default)) (uuid "d8336193-0c6a-450a-b17f-44ce6e543378")) (wire (pts (xy 190.5 46.99) (xy 190.5 48.26)) (stroke (width 0) (type default)) (uuid "d99af2fa-2f1f-4e6a-aba2-df0cdf0bd9b1")) (wire (pts (xy 57.15 82.55) (xy 68.58 82.55)) (stroke (width 0) (type default)) (uuid "db6bdf21-088d-45ed-b247-b1e84568f4f9")) (wire (pts (xy 105.41 45.72) (xy 105.41 46.99)) (stroke (width 0) (type default)) (uuid "dce9db85-1114-4c42-ada6-c3ab2cd8d9a9")) (wire (pts (xy 257.81 91.44) (xy 257.81 90.17)) (stroke (width 0) (type default)) (uuid "dd2db1c4-c33f-47da-843d-a86081428bb0")) (wire (pts (xy 228.6 90.17) (xy 236.22 90.17)) (stroke (width 0) (type default)) (uuid "dd68282a-67ee-483e-a535-e430213df65a")) (wire (pts (xy 157.48 63.5) (xy 160.02 63.5)) (stroke (width 0) (type default)) (uuid "df7e9f1b-cb67-4bea-9494-6b42c1315cda")) (wire (pts (xy 50.8 34.29) (xy 57.15 34.29)) (stroke (width 0) (type default)) (uuid "e4afcd15-3492-4e27-950c-6716d62227f2")) (wire (pts (xy 68.58 82.55) (xy 78.74 82.55)) (stroke (width 0) (type default)) (uuid "e4ea914c-95b7-40e4-87b6-c3c86e72091f")) (wire (pts (xy 133.35 68.58) (xy 133.35 67.31)) (stroke (width 0) (type default)) (uuid "e757f2a8-a230-49a3-bc8a-be01199c7127")) (wire (pts (xy 128.27 102.87) (xy 130.81 102.87)) (stroke (width 0) (type default)) (uuid "e7975401-490b-485e-9359-65cbafdc65ae")) (wire (pts (xy 33.02 97.79) (xy 33.02 67.31)) (stroke (width 0) (type default)) (uuid "e9dac3d9-65f9-4c73-9cbe-cd42b1852224")) (wire (pts (xy 231.14 44.45) (xy 236.22 44.45)) (stroke (width 0) (type default)) (uuid "ef652169-5654-4f01-919b-c5b357de0f98")) (wire (pts (xy 34.29 58.42) (xy 34.29 64.77)) (stroke (width 0) (type default)) (uuid "efc8e1ee-cc00-44c1-8da9-5afc10dad8f6")) (wire (pts (xy 57.15 35.56) (xy 57.15 34.29)) (stroke (width 0) (type default)) (uuid "efd1fca6-cdf9-4187-b093-e19b7395363f")) (wire (pts (xy 50.8 35.56) (xy 50.8 34.29)) (stroke (width 0) (type default)) (uuid "f1dcdd08-7048-4841-a090-82e23b525d67")) (wire (pts (xy 49.53 82.55) (xy 49.53 78.74)) (stroke (width 0) (type default)) (uuid "f203d91b-1d93-47c8-9b81-9c07f7c24b39")) (wire (pts (xy 259.08 67.31) (xy 259.08 66.04)) (stroke (width 0) (type default)) (uuid "f30828a0-deda-4512-a88b-15589aa85550")) (wire (pts (xy 69.85 48.26) (xy 93.98 48.26)) (stroke (width 0) (type default)) (uuid "fa79d681-e624-472b-90ca-4bceabd22b58")) (wire (pts (xy 219.71 96.52) (xy 158.75 96.52)) (stroke (width 0) (type default)) (uuid "fb380bd7-1916-4ca4-a598-0bdcac2dfaac")) (wire (pts (xy 246.38 45.72) (xy 246.38 44.45)) (stroke (width 0) (type default)) (uuid "fdfa8463-af02-44fd-b403-438076cb6fc4")) (symbol (lib_id "Device:C") (at 128.27 50.8 0) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "0074ef94-0d36-4108-8f14-b1d064783f91") (property "Reference" "C8" (at 128.27 48.26 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "0.1uF" (at 128.27 53.34 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 129.2352 54.61 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 128.27 50.8 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 128.27 50.8 0) (effects (font (size 1.27 1.27)))) (pin "2" (uuid "40a700ce-d8c6-499d-85bd-ca5185849750")) (pin "1" (uuid "7435bd30-37e9-41a7-9e23-93385145da9e")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "C8") (unit 1))))) (symbol (lib_id "Connector:Conn_01x01_Pin") (at 261.62 125.73 90) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "02603ffc-8ef0-4551-98e5-69f3d0b5f5ed") (property "Reference" "X2A1" (at 261.62 125.73 0) (effects (font (size 1.27 1.27)) (justify right))) (property "Value" "Conn_01x01_Pin" (at 262.89 126.365 90) (effects (font (size 1.27 1.27)) (justify right) (hide yes))) (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" (at 261.62 125.73 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 261.62 125.73 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 261.62 125.73 0) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "b0e8089c-1407-4dd7-81ad-5836b1a948f4")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "X2A1") (unit 1))))) (symbol (lib_id "Device:C_Polarized") (at 50.8 39.37 0) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "028b1213-6965-4c6b-88c6-99867053371d") (property "Reference" "C14" (at 50.8 36.83 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "47uF 35v" (at 45.72 41.91 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "C47u35v:CAPPRD200W50D525H1250" (at 51.7652 43.18 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 50.8 39.37 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 50.8 39.37 0) (effects (font (size 1.27 1.27)))) (pin "2" (uuid "ecc9dcf8-ef72-45a3-a036-f97d5c03b47a")) (pin "1" (uuid "adfcc31b-373b-4348-88bb-59bab5bfd258")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "C14") (unit 1))))) (symbol (lib_id "Device:D") (at 261.62 49.53 270) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "04786958-d145-4302-af4f-030967ac2a8a") (property "Reference" "D1" (at 261.62 46.99 90) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "12V" (at 261.62 52.07 90) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 261.62 49.53 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 261.62 49.53 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 261.62 49.53 0) (effects (font (size 1.27 1.27)))) (property "Sim.Device" "D" (at 261.62 49.53 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Sim.Pins" "1=K 2=A" (at 261.62 49.53 0) (effects (font (size 1.27 1.27)) (hide yes))) (pin "1" (uuid "fc238e8a-f415-426b-bfb8-a60940691ec0")) (pin "2" (uuid "051bbe09-8bdc-4779-bfa2-a3908276e774")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "D1") (unit 1))))) (symbol (lib_id "power:GND") (at 124.46 104.14 0) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced yes) (uuid "0638dd7e-db00-45d0-ab7e-e480ad52bc71") (property "Reference" "#PWR0106" (at 124.46 110.49 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Value" "GND" (at 124.46 109.22 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 124.46 104.14 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "" (at 124.46 104.14 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 124.46 104.14 0) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "1cb34798-dd6e-4100-9bc6-8d54414adf08")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "#PWR0106") (unit 1))))) (symbol (lib_id "power:GND") (at 171.45 74.93 0) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "0ce31e06-d5bf-4265-8302-b0df1a209197") (property "Reference" "#PWR0109" (at 171.45 81.28 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Value" "GND" (at 171.45 80.01 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 171.45 74.93 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "" (at 171.45 74.93 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 171.45 74.93 0) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "1a78a636-f0a9-45b0-8a4e-9f2c470d570c")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "#PWR0109") (unit 1))))) (symbol (lib_id "power:GND") (at 135.89 55.88 0) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced yes) (uuid "12f01892-6ea7-495e-854d-744cf9b544bc") (property "Reference" "#PWR0108" (at 135.89 62.23 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Value" "GND" (at 135.89 60.96 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 135.89 55.88 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "" (at 135.89 55.88 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 135.89 55.88 0) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "942cf78d-d279-40d4-80ca-d3ba61fd8251")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "#PWR0108") (unit 1))))) (symbol (lib_id "Device:C_Polarized") (at 224.79 66.04 270) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "225d2ae8-3230-4005-a4b4-2094ff960f52") (property "Reference" "C4" (at 227.33 63.5 90) (effects (font (size 1.27 1.27)))) (property "Value" "47uF 63v" (at 231.14 67.31 90) (effects (font (size 1.27 1.27)))) (property "Footprint" "C47u63v:CAPPRD350W65D800H1250" (at 220.98 67.0052 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 224.79 66.04 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 224.79 66.04 0) (effects (font (size 1.27 1.27)))) (pin "2" (uuid "301a08fd-b6be-45bd-a4b3-131c4d4ae900")) (pin "1" (uuid "330ccdc2-e319-47b7-b9da-f6a3ec507838")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "C4") (unit 1))))) (symbol (lib_id "Device:R") (at 105.41 50.8 0) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "22c624a2-9c69-4937-8b4e-0e03aaaaa038") (property "Reference" "R14" (at 105.41 46.99 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "2.2K" (at 105.41 54.61 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 103.632 50.8 90) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 105.41 50.8 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 105.41 50.8 0) (effects (font (size 1.27 1.27)))) (pin "2" (uuid "a1358048-f4a8-46fd-b384-828214ca563a")) (pin "1" (uuid "fce8e472-b813-4a8e-9411-5e0e03bbe999")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "R14") (unit 1))))) (symbol (lib_id "Device:C_Polarized") (at 93.98 53.34 0) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "26f9efc1-f18f-46a4-a4e0-fd7b825b179e") (property "Reference" "C12" (at 93.98 50.8 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "47uF 35v" (at 88.9 55.88 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "C47u35v:CAPPRD200W50D525H1250" (at 94.9452 57.15 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 93.98 53.34 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 93.98 53.34 0) (effects (font (size 1.27 1.27)))) (pin "2" (uuid "4978d725-9316-4043-8a1f-b1c9ce984c4e")) (pin "1" (uuid "88b3b53e-f532-4bb8-82a4-d6d592645dc1")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "C12") (unit 1))))) (symbol (lib_id "power:GND") (at 190.5 57.15 0) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced yes) (uuid "27f8adc3-3950-478b-b798-a085134eab29") (property "Reference" "#PWR0112" (at 190.5 63.5 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Value" "GND" (at 190.5 62.23 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 190.5 57.15 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "" (at 190.5 57.15 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 190.5 57.15 0) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "15910eea-dab8-4e08-897a-116a0d158e23")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "#PWR0112") (unit 1))))) (symbol (lib_id "Device:R") (at 179.07 81.28 90) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "333c6bef-4cf7-4319-b480-a4d554049f1a") (property "Reference" "R9" (at 175.26 82.55 90) (effects (font (size 1.27 1.27)))) (property "Value" "2.2K" (at 184.15 82.55 90) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 179.07 83.058 90) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 179.07 81.28 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 179.07 81.28 0) (effects (font (size 1.27 1.27)))) (pin "2" (uuid "70759d1c-be29-4c5c-8809-98315f1c5ab1")) (pin "1" (uuid "e877352c-a598-4129-b31b-d17acebc6954")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "R9") (unit 1))))) (symbol (lib_id "Device:C_Polarized") (at 99.06 67.31 270) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "388d7ed8-52d9-442b-b762-60006c60c529") (property "Reference" "C11" (at 101.6 64.77 90) (effects (font (size 1.27 1.27)))) (property "Value" "47uF 63v" (at 105.41 68.58 90) (effects (font (size 1.27 1.27)))) (property "Footprint" "C47u63v:CAPPRD350W65D800H1250" (at 95.25 68.2752 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 99.06 67.31 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 99.06 67.31 0) (effects (font (size 1.27 1.27)))) (pin "2" (uuid "51a481e5-83de-40ff-89b7-dfc4eae21bc2")) (pin "1" (uuid "89572e0b-9d69-46f6-8e01-4ad6452bc3f7")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "C11") (unit 1))))) (symbol (lib_id "Connector_Generic:Conn_01x01") (at 26.67 85.09 0) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced yes) (uuid "38fe0de6-7d2f-4f1f-80d5-5bc0704f2c9a") (property "Reference" "J1" (at 29.21 83.82 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "Conn_01x01" (at 29.21 86.36 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "" (at 26.67 85.09 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 26.67 85.09 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 26.67 85.09 0) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "67cc4a14-d1b6-4462-bcdc-06d9ed4be212")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "J1") (unit 1))))) (symbol (lib_id "Device:R") (at 121.92 91.44 90) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "4281c715-bfa5-4c1d-833f-007ae19a4629") (property "Reference" "R11" (at 118.11 92.71 90) (effects (font (size 1.27 1.27)))) (property "Value" "47" (at 125.73 92.71 90) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 121.92 93.218 90) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 121.92 91.44 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 121.92 91.44 0) (effects (font (size 1.27 1.27)))) (pin "2" (uuid "6faefed0-61f7-4fd8-8ccb-07f56d270344")) (pin "1" (uuid "4db49fe1-988c-4207-bdeb-2ca6e8d955f4")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "R11") (unit 1))))) (symbol (lib_id "Device:R") (at 247.65 90.17 90) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "465be87b-5590-4da0-9122-4e5009c124ff") (property "Reference" "R1" (at 243.84 91.44 90) (effects (font (size 1.27 1.27)))) (property "Value" "47" (at 251.46 91.44 90) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 247.65 91.948 90) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 247.65 90.17 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 247.65 90.17 0) (effects (font (size 1.27 1.27)))) (pin "2" (uuid "518371d7-430d-4ece-85c1-e014c34e5f91")) (pin "1" (uuid "8e32f884-af0c-4f58-b1d4-dee7df354570")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "R1") (unit 1))))) (symbol (lib_id "OPA1642AID:OPA1642AID") (at 45.72 67.31 0) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "46bd3898-2842-4255-93e2-77804f67ee14") (property "Reference" "IC2" (at 49.53 64.77 0) (effects (font (size 1.27 1.27)))) (property "Value" "OPA1642AID" (at 53.34 69.85 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "opa1642:SOIC127P600X175-8N" (at 45.72 67.31 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "Datasheet" "" (at 45.72 67.31 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "\n \n Dual SoundPlus™ high-performance, JFET-input audio op amp\n \n" (at 45.72 67.31 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "MF" "Texas Instruments" (at 45.72 67.31 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "MAXIMUM_PACKAGE_HEIGHT" "1.75 mm" (at 45.72 67.31 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "Package" "SOIC-8 Texas Instruments" (at 45.72 67.31 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "Price" "None" (at 45.72 67.31 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "Check_prices" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=eda" (at 45.72 67.31 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "STANDARD" "IPC 7351B" (at 45.72 67.31 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "PARTREV" "D" (at 45.72 67.31 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "SnapEDA_Link" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=snap" (at 45.72 67.31 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "MP" "OPA1642AID" (at 45.72 67.31 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "Availability" "In Stock" (at 45.72 67.31 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "MANUFACTURER" "Texas Instruments" (at 45.72 67.31 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (pin "1" (uuid "f6adf7a0-f4f6-489d-aa22-16fd1d80ab13")) (pin "7" (uuid "c8f04e9e-37cd-44d0-befd-fa1c054349ed")) (pin "4" (uuid "d54d4c06-fe4e-4323-b930-98b2c1a2dba1")) (pin "2" (uuid "76767c82-1b5b-439e-a798-ee79a4f46bba")) (pin "6" (uuid "c36582c0-b02a-453d-9f70-9abbd6fba049")) (pin "8" (uuid "8849be4b-fb86-4bc5-a0c6-953ccb2e220e")) (pin "3" (uuid "29daf701-3def-4826-95b5-e97a339f144a")) (pin "5" (uuid "1c1b288a-a713-40eb-8869-436701df4af6")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "IC2") (unit 1))))) (symbol (lib_id "Device:R") (at 110.49 50.8 0) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "486efbe6-6d60-4f65-a28a-eac2f703a21a") (property "Reference" "R13" (at 110.49 46.99 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "2.2K" (at 110.49 54.61 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 108.712 50.8 90) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 110.49 50.8 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 110.49 50.8 0) (effects (font (size 1.27 1.27)))) (pin "2" (uuid "bc0f2659-41ff-4316-90ad-7a947ab2a415")) (pin "1" (uuid "feaeb753-707d-4138-a168-f4b32dfbad00")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "R13") (unit 1))))) (symbol (lib_id "Device:C_Polarized") (at 246.38 49.53 0) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "4af43834-c924-4e65-939c-9334e1de4766") (property "Reference" "C2" (at 246.38 46.99 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "47uF 35v" (at 241.3 52.07 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "C47u35v:CAPPRD200W50D525H1250" (at 247.3452 53.34 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 246.38 49.53 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 246.38 49.53 0) (effects (font (size 1.27 1.27)))) (pin "2" (uuid "647869d4-07f5-4c7f-abe2-670267baac61")) (pin "1" (uuid "65bae4a4-9996-4268-bc65-e781d99f3f37")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "C2") (unit 1))))) (symbol (lib_id "Device:C_Polarized") (at 219.71 52.07 0) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "4b15cc8f-884d-43ed-8a34-09c6b829c7ae") (property "Reference" "C5" (at 219.71 49.53 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "47uF 35v" (at 214.63 54.61 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "C47u35v:CAPPRD200W50D525H1250" (at 220.6752 55.88 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 219.71 52.07 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 219.71 52.07 0) (effects (font (size 1.27 1.27)))) (pin "2" (uuid "525fdf3a-5064-41df-a1da-296395c40b65")) (pin "1" (uuid "7f9c78b5-f669-4314-abbc-4dd36132e90c")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "C5") (unit 1))))) (symbol (lib_id "Device:R") (at 82.55 82.55 90) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "4dfa4bfd-4e46-43b4-9020-c77e950185e1") (property "Reference" "R16" (at 82.55 80.01 90) (effects (font (size 1.27 1.27)))) (property "Value" "2.2K" (at 82.55 85.09 90) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 82.55 84.328 90) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 82.55 82.55 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 82.55 82.55 0) (effects (font (size 1.27 1.27)))) (pin "2" (uuid "7d35210b-3864-4e01-beca-84275481542d")) (pin "1" (uuid "b795f1c6-d889-4b77-937f-8d4fed456b68")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "R16") (unit 1))))) (symbol (lib_id "Device:C") (at 182.88 38.1 0) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "57c290cf-4a3a-4689-a5cc-79dd666271df") (property "Reference" "C6" (at 182.88 35.56 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "0.1uF" (at 182.88 40.64 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "C.022uF50v:K223K15X7RF5UL2" (at 183.8452 41.91 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 182.88 38.1 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 182.88 38.1 0) (effects (font (size 1.27 1.27)))) (pin "2" (uuid "ace7e3a0-e0a8-4d53-aed7-f73bbc2ba9ac")) (pin "1" (uuid "7875c3ce-ca93-43d1-a530-cfb1c2e4f9b4")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "C6") (unit 1))))) (symbol (lib_id "Connector:Conn_01x01_Pin") (at 25.4 64.77 0) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "5927db5e-0de5-4020-a1e2-d3c795f23f3a") (property "Reference" "SGNL_B1" (at 25.4 64.77 0) (effects (font (size 1.27 1.27)) (justify right))) (property "Value" "Conn_01x01_Pin" (at 24.765 66.04 90) (effects (font (size 1.27 1.27)) (justify right) (hide yes))) (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" (at 25.4 64.77 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 25.4 64.77 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 25.4 64.77 0) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "1f5986a4-36e7-4342-892f-caed098ad8ac")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "SGNL_B1") (unit 1))))) (symbol (lib_id "Device:D") (at 135.89 50.8 270) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "60bb60f7-d540-494b-9a5e-5a737fa70d44") (property "Reference" "D2" (at 135.89 48.26 90) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "12V" (at 135.89 53.34 90) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 135.89 50.8 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 135.89 50.8 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 135.89 50.8 0) (effects (font (size 1.27 1.27)))) (property "Sim.Device" "D" (at 135.89 50.8 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Sim.Pins" "1=K 2=A" (at 135.89 50.8 0) (effects (font (size 1.27 1.27)) (hide yes))) (pin "1" (uuid "48fffc35-69ad-407d-8ac5-a48aaef81aaa")) (pin "2" (uuid "6d04fede-95df-4e99-9581-c968c34a51b8")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "D2") (unit 1))))) (symbol (lib_id "Device:R") (at 34.29 54.61 0) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "621df7af-eee1-4ba7-b334-c8f75f6a97e7") (property "Reference" "R20" (at 34.29 50.8 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "1G" (at 34.29 58.42 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "R1Go:RESAD1650W70L650D250" (at 32.512 54.61 90) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 34.29 54.61 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 34.29 54.61 0) (effects (font (size 1.27 1.27)))) (pin "2" (uuid "37367294-eb12-4385-8a7d-d76663413377")) (pin "1" (uuid "adbf79fc-38fb-453c-9ec4-dcfac1a233ec")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "R20") (unit 1))))) (symbol (lib_id "power:GND") (at 64.77 58.42 0) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced yes) (uuid "63c7cdab-6e11-4929-be9e-27ccae01fe37") (property "Reference" "#PWR0104" (at 64.77 64.77 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Value" "GND" (at 64.77 63.5 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 64.77 58.42 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "" (at 64.77 58.42 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 64.77 58.42 0) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "c98fc743-875d-40d3-93ae-0d4889cfef40")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "#PWR0104") (unit 1))))) (symbol (lib_id "Connector:Conn_01x01_Pin") (at 128.27 109.22 90) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "64e688e4-4221-4813-bb3e-a93bb87dbbc0") (property "Reference" "GND_T2" (at 128.27 109.22 0) (effects (font (size 1.27 1.27)) (justify right))) (property "Value" "Conn_01x01_Pin" (at 129.54 109.855 90) (effects (font (size 1.27 1.27)) (justify right) (hide yes))) (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" (at 128.27 109.22 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 128.27 109.22 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 128.27 109.22 0) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "92d01587-a830-495c-834d-8598d13fa0bc")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "GND_T2") (unit 1))))) (symbol (lib_id "Connector:Conn_01x01_Pin") (at 142.24 52.07 90) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "6778b725-cc7e-4fa7-8d8b-1f47e2db759c") (property "Reference" "VCC_B1" (at 142.24 52.07 0) (effects (font (size 1.27 1.27)) (justify right))) (property "Value" "Conn_01x01_Pin" (at 143.51 52.705 90) (effects (font (size 1.27 1.27)) (justify right) (hide yes))) (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" (at 142.24 52.07 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 142.24 52.07 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 142.24 52.07 0) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "743b3ee1-c27b-44f5-9b84-fc078bb4ae34")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "VCC_B1") (unit 1))))) (symbol (lib_id "Device:R") (at 53.34 82.55 90) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "6a141024-0740-4682-ac78-fa29ac380bd3") (property "Reference" "R19" (at 49.53 83.82 90) (effects (font (size 1.27 1.27)))) (property "Value" "2.2K" (at 58.42 83.82 90) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 53.34 84.328 90) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 53.34 82.55 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 53.34 82.55 0) (effects (font (size 1.27 1.27)))) (pin "2" (uuid "57ab3927-126d-4bcb-b960-d87e99dac8f6")) (pin "1" (uuid "8b59cb1e-3efe-4123-946e-88111aaeec9a")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "R19") (unit 1))))) (symbol (lib_id "Device:R") (at 190.5 39.37 0) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "6bc81894-9db7-4be7-a876-2de954b2e8d4") (property "Reference" "R8" (at 190.5 35.56 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "47K" (at 190.5 43.18 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 188.722 39.37 90) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 190.5 39.37 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 190.5 39.37 0) (effects (font (size 1.27 1.27)))) (pin "2" (uuid "f6fd3a46-9bd3-4b6f-90c5-12f4fdc83af9")) (pin "1" (uuid "f7e0c90e-3c47-4d51-98ea-1a1c1bcebdf5")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "R8") (unit 1))))) (symbol (lib_id "Connector:Conn_01x01_Pin") (at 41.91 40.64 90) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "6e74e034-da91-4106-b8de-7f1079a017da") (property "Reference" "VCC_B2" (at 41.91 40.64 0) (effects (font (size 1.27 1.27)) (justify right))) (property "Value" "Conn_01x01_Pin" (at 43.18 41.275 90) (effects (font (size 1.27 1.27)) (justify right) (hide yes))) (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" (at 41.91 40.64 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 41.91 40.64 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 41.91 40.64 0) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "8a6f6c2d-76de-4ed7-9b45-ed1e73bbcf25")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "VCC_B2") (unit 1))))) (symbol (lib_id "Connector:Conn_01x01_Pin") (at 267.97 50.8 90) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "7056a7e2-eebb-4df3-8f54-dadb45bfed44") (property "Reference" "VCC_A1" (at 267.97 50.8 0) (effects (font (size 1.27 1.27)) (justify right))) (property "Value" "Conn_01x01_Pin" (at 269.24 51.435 90) (effects (font (size 1.27 1.27)) (justify right) (hide yes))) (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" (at 267.97 50.8 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 267.97 50.8 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 267.97 50.8 0) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "fe39015c-d0fe-44f1-a61c-5dd362f67ab6")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "VCC_A1") (unit 1))))) (symbol (lib_id "Device:R") (at 231.14 39.37 0) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "7f13f25b-68e1-44e1-992e-6e69c71b1400") (property "Reference" "R5" (at 231.14 35.56 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "330" (at 231.14 43.18 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 229.362 39.37 90) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 231.14 39.37 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 231.14 39.37 0) (effects (font (size 1.27 1.27)))) (pin "2" (uuid "723218d0-30ba-4d7d-b4ad-dcaf19ce4da5")) (pin "1" (uuid "0c84d6f8-f220-44e8-a38e-cbe00dda0ac3")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "R5") (unit 1))))) (symbol (lib_id "power:GND") (at 50.8 44.45 0) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "8247279b-6189-44c1-a55a-78f114f233c6") (property "Reference" "#PWR?" (at 50.8 41.91 0) (effects (font (size 1.27 1.27)))) (property "Value" "GND" (at 50.8 46.99 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 50.8 44.45 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 50.8 44.45 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 50.8 44.45 0) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "87b4858d-1f90-4402-873b-2d25b9bb61f7")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "#PWR?") (unit 1))))) (symbol (lib_id "Device:R") (at 231.14 49.53 0) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "831a82f3-bee1-4a20-9f0c-de8891a80b24") (property "Reference" "R4" (at 231.14 45.72 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "2.2K" (at 231.14 53.34 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 229.362 49.53 90) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 231.14 49.53 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 231.14 49.53 0) (effects (font (size 1.27 1.27)))) (pin "2" (uuid "24ce802d-7dfa-4097-a649-d24b888ef91b")) (pin "1" (uuid "4ed7e121-3441-41dc-bdf1-ce3e7760743d")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "R4") (unit 1))))) (symbol (lib_id "Device:C") (at 254 49.53 0) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "85f8809e-e152-4de2-87ff-91f95cdc3dd3") (property "Reference" "C1" (at 254 46.99 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "0.1uF" (at 254 52.07 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 254.9652 53.34 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 254 49.53 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 254 49.53 0) (effects (font (size 1.27 1.27)))) (pin "2" (uuid "b7ea7844-17c6-4c08-bf47-43522e085528")) (pin "1" (uuid "07c5af00-f156-4fd3-8ba9-83534d940a6d")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "C1") (unit 1))))) (symbol (lib_id "Connector:Conn_01x01_Pin") (at 152.4 63.5 0) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "8a06125c-2a98-42e5-987b-f3b86e05fdf0") (property "Reference" "SGNL_A1" (at 152.4 63.5 0) (effects (font (size 1.27 1.27)) (justify right))) (property "Value" "Conn_01x01_Pin" (at 151.765 64.77 90) (effects (font (size 1.27 1.27)) (justify right) (hide yes))) (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" (at 152.4 63.5 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 152.4 63.5 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 152.4 63.5 0) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "dc757226-c32d-437b-8181-dc9c7ef42847")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "SGNL_A1") (unit 1))))) (symbol (lib_id "Device:R") (at 64.77 53.34 0) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "8a64f8ab-cec7-4969-9401-c34ade5f0cb5") (property "Reference" "R17" (at 64.77 49.53 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "47K" (at 64.77 57.15 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 62.992 53.34 90) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 64.77 53.34 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 64.77 53.34 0) (effects (font (size 1.27 1.27)))) (pin "2" (uuid "56b00a3a-50d5-44ba-8e34-e5b658887ba0")) (pin "1" (uuid "84750aa7-df07-4ba8-a9a5-3927fa32b3c2")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "R17") (unit 1))))) (symbol (lib_id "OPA1642AID:OPA1642AID") (at 171.45 66.04 0) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "8d506b1e-5a87-423a-8d59-2dff832fadc9") (property "Reference" "IC1" (at 175.26 63.5 0) (effects (font (size 1.27 1.27)))) (property "Value" "OPA1642AID" (at 179.07 68.58 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "opa1642:SOIC127P600X175-8N" (at 171.45 66.04 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "Datasheet" "" (at 171.45 66.04 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "\n \n Dual SoundPlus™ high-performance, JFET-input audio op amp\n \n" (at 171.45 66.04 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "MF" "Texas Instruments" (at 171.45 66.04 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "MAXIMUM_PACKAGE_HEIGHT" "1.75 mm" (at 171.45 66.04 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "Package" "SOIC-8 Texas Instruments" (at 171.45 66.04 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "Price" "None" (at 171.45 66.04 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "Check_prices" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=eda" (at 171.45 66.04 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "STANDARD" "IPC 7351B" (at 171.45 66.04 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "PARTREV" "D" (at 171.45 66.04 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "SnapEDA_Link" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=snap" (at 171.45 66.04 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "MP" "OPA1642AID" (at 171.45 66.04 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "Availability" "In Stock" (at 171.45 66.04 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "MANUFACTURER" "Texas Instruments" (at 171.45 66.04 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (pin "1" (uuid "3df379a1-e2db-4012-b7f4-e03ddff491f4")) (pin "7" (uuid "c8f04e9e-37cd-44d0-befd-fa1c054349ee")) (pin "4" (uuid "651337f9-8ba0-4fb4-a19a-5b2153e21a46")) (pin "2" (uuid "ffee3cea-43a3-4548-959e-f592c529c82d")) (pin "6" (uuid "c36582c0-b02a-453d-9f70-9abbd6fba04a")) (pin "8" (uuid "6e9185ff-d89f-45cd-881a-ae7bd73c8482")) (pin "3" (uuid "2b4ed616-8377-450b-a166-514a2dceb365")) (pin "5" (uuid "1c1b288a-a713-40eb-8869-436701df4af7")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "IC1") (unit 1))))) (symbol (lib_id "Device:R") (at 190.5 52.07 0) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "9073f975-3395-426e-a26b-e4f39deda04a") (property "Reference" "R7" (at 190.5 48.26 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "47K" (at 190.5 55.88 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 188.722 52.07 90) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 190.5 52.07 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 190.5 52.07 0) (effects (font (size 1.27 1.27)))) (pin "2" (uuid "f0c9e713-d820-482b-9034-493d59e5d602")) (pin "1" (uuid "b724afc6-2e72-4c95-8481-b7e672131d32")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "R7") (unit 1))))) (symbol (lib_id "Device:C_Polarized") (at 99.06 91.44 270) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "90b176ff-c759-4172-98d6-a482a71dc515") (property "Reference" "C10" (at 101.6 88.9 90) (effects (font (size 1.27 1.27)))) (property "Value" "47uF 63v" (at 105.41 92.71 90) (effects (font (size 1.27 1.27)))) (property "Footprint" "C47u63v:CAPPRD350W65D800H1250" (at 95.25 92.4052 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 99.06 91.44 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 99.06 91.44 0) (effects (font (size 1.27 1.27)))) (pin "2" (uuid "f1b69faa-bead-4c39-bc09-4ced25f2253d")) (pin "1" (uuid "65dc8b05-7f72-46e6-a78b-a3bc00e18890")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "C10") (unit 1))))) (symbol (lib_id "power:GND") (at 261.62 54.61 0) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced yes) (uuid "94e815d1-ccba-4300-acdb-411e86c0272d") (property "Reference" "#PWR0116" (at 261.62 60.96 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Value" "GND" (at 261.62 59.69 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 261.62 54.61 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "" (at 261.62 54.61 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 261.62 54.61 0) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "60bc8531-cbca-4d52-a219-177c287740b9")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "#PWR0116") (unit 1))))) (symbol (lib_id "Connector:Conn_01x01_Pin") (at 25.4 67.31 0) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "989fc3e9-94aa-4ae0-8fd0-530b54bc7c6a") (property "Reference" "GND_B1" (at 25.4 67.31 0) (effects (font (size 1.27 1.27)) (justify right))) (property "Value" "Conn_01x01_Pin" (at 24.765 68.58 90) (effects (font (size 1.27 1.27)) (justify right) (hide yes))) (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" (at 25.4 67.31 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 25.4 67.31 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 25.4 67.31 0) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "ebb67577-81cb-402a-a479-e6b69b6a2a4c")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "GND_B1") (unit 1))))) (symbol (lib_id "Device:R") (at 121.92 67.31 90) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "9a83ce8c-c4ea-4707-8978-a44f631e4fc0") (property "Reference" "R12" (at 118.11 68.58 90) (effects (font (size 1.27 1.27)))) (property "Value" "47" (at 125.73 68.58 90) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 121.92 69.088 90) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 121.92 67.31 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 121.92 67.31 0) (effects (font (size 1.27 1.27)))) (pin "2" (uuid "29c69a30-72c3-4c8e-853b-16a0d81d7ab7")) (pin "1" (uuid "03ca679f-145d-4409-b8c3-fb649159ea82")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "R12") (unit 1))))) (symbol (lib_id "Connector:Conn_01x01_Pin") (at 135.89 127 90) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "9e00ee5d-3600-4941-9f50-ffa5b59f36da") (property "Reference" "X2B1" (at 135.89 127 0) (effects (font (size 1.27 1.27)) (justify right))) (property "Value" "Conn_01x01_Pin" (at 137.16 127.635 90) (effects (font (size 1.27 1.27)) (justify right) (hide yes))) (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" (at 135.89 127 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 135.89 127 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 135.89 127 0) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "f6197fba-036d-47cd-8ff2-bcb89febeb1e")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "X2B1") (unit 1))))) (symbol (lib_id "power:GND") (at 246.38 54.61 0) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced yes) (uuid "9ef2a4b2-dd03-4616-8256-be478fd95499") (property "Reference" "#PWR0113" (at 246.38 60.96 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Value" "GND" (at 246.38 59.69 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 246.38 54.61 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "" (at 246.38 54.61 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 246.38 54.61 0) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "9ddd2182-efff-4095-8aea-063efb3c9f4c")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "#PWR0113") (unit 1))))) (symbol (lib_id "Device:R") (at 208.28 81.28 90) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "a10f13f8-a81d-4f2b-b313-a7028981413d") (property "Reference" "R6" (at 204.47 82.55 90) (effects (font (size 1.27 1.27)))) (property "Value" "2.2K" (at 213.36 82.55 90) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 208.28 83.058 90) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 208.28 81.28 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 208.28 81.28 0) (effects (font (size 1.27 1.27)))) (pin "2" (uuid "e56fb348-0eed-4724-8374-d5ed289135fc")) (pin "1" (uuid "2dc2e58e-bc13-43b6-aacc-05e583e6b221")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "R6") (unit 1))))) (symbol (lib_id "Device:R") (at 160.02 53.34 0) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "a3724ff5-8cb6-46d0-b421-63da8a253dc7") (property "Reference" "R10" (at 160.02 49.53 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "1G" (at 160.02 57.15 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "R1Go:RESAD1650W70L650D250" (at 158.242 53.34 90) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 160.02 53.34 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 160.02 53.34 0) (effects (font (size 1.27 1.27)))) (pin "2" (uuid "6cf9d0d0-dcc0-4e99-8d52-6d40b2b7c1ac")) (pin "1" (uuid "d97e47c4-78d6-4cb3-aec2-ef357ac9254f")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "R10") (unit 1))))) (symbol (lib_id "OPA1642AID:OPA1642AID") (at 207.01 90.17 0) (mirror x) (unit 2) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "adb405c9-094f-4a77-a219-d4048679141c") (property "Reference" "IC1" (at 208.28 86.36 0) (effects (font (size 1.27 1.27)))) (property "Value" "OPA1642AID" (at 212.09 93.98 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "opa1642:SOIC127P600X175-8N" (at 207.01 90.17 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "Datasheet" "" (at 207.01 90.17 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "\n \n Dual SoundPlus™ high-performance, JFET-input audio op amp\n \n" (at 207.01 90.17 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "MF" "Texas Instruments" (at 207.01 90.17 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "MAXIMUM_PACKAGE_HEIGHT" "1.75 mm" (at 207.01 90.17 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "Package" "SOIC-8 Texas Instruments" (at 207.01 90.17 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "Price" "None" (at 207.01 90.17 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "Check_prices" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=eda" (at 207.01 90.17 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "STANDARD" "IPC 7351B" (at 207.01 90.17 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "PARTREV" "D" (at 207.01 90.17 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "SnapEDA_Link" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=snap" (at 207.01 90.17 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "MP" "OPA1642AID" (at 207.01 90.17 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "Availability" "In Stock" (at 207.01 90.17 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "MANUFACTURER" "Texas Instruments" (at 207.01 90.17 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (pin "1" (uuid "8eb7a723-ff49-4e64-bcff-d54dedebf6de")) (pin "7" (uuid "05d5304f-1ed3-4e59-a514-76c851c09ee5")) (pin "4" (uuid "5ea9edc8-d7e5-498d-a5e1-f4d8f0e59841")) (pin "2" (uuid "223a6f4e-dc79-479d-8844-0b96b300e0c6")) (pin "6" (uuid "476b9f2a-7339-4832-a12b-b9f0e4788b29")) (pin "8" (uuid "30ff56b3-f2da-4beb-89d7-da61228bd144")) (pin "3" (uuid "bf170eff-2b68-464c-8e53-81064b7f76b1")) (pin "5" (uuid "5a08e4c8-6a5e-47fb-957b-3a799787a7e7")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "IC1") (unit 2))))) (symbol (lib_id "power:GND") (at 120.65 55.88 0) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced yes) (uuid "b298509f-d04e-48de-bbad-f0bcbab3a04f") (property "Reference" "#PWR0105" (at 120.65 62.23 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Value" "GND" (at 120.65 60.96 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 120.65 55.88 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "" (at 120.65 55.88 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 120.65 55.88 0) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "e2867602-0acc-44af-823e-6d73343203c4")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "#PWR0105") (unit 1))))) (symbol (lib_id "Device:C") (at 57.15 39.37 0) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "b34f1ed3-ca84-4b39-accd-7cbb7c08ede6") (property "Reference" "C13" (at 57.15 36.83 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "0.1uF" (at 57.15 41.91 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 58.1152 43.18 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 57.15 39.37 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 57.15 39.37 0) (effects (font (size 1.27 1.27)))) (pin "2" (uuid "08381df4-f68a-4b02-838a-e33bc5db6181")) (pin "1" (uuid "f9c91b11-1320-43ce-a281-800009a799b3")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "C13") (unit 1))))) (symbol (lib_id "Device:C_Polarized") (at 224.79 90.17 270) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "b794b8cc-7dca-48f0-a5b9-9fe56f5cb9c1") (property "Reference" "C3" (at 227.33 87.63 90) (effects (font (size 1.27 1.27)))) (property "Value" "47uF 63v" (at 231.14 91.44 90) (effects (font (size 1.27 1.27)))) (property "Footprint" "C47u63v:CAPPRD350W65D800H1250" (at 220.98 91.1352 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 224.79 90.17 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 224.79 90.17 0) (effects (font (size 1.27 1.27)))) (pin "2" (uuid "660c13ef-ecb7-4c3d-86fd-115e4d9a0c71")) (pin "1" (uuid "c590c216-8b22-4232-85fc-4f587bd02276")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "C3") (unit 1))))) (symbol (lib_id "power:GND") (at 254 54.61 0) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced yes) (uuid "b83e3479-76fc-41a1-9e65-7d4d4f852f71") (property "Reference" "#PWR0115" (at 254 60.96 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Value" "GND" (at 254 59.69 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 254 54.61 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "" (at 254 54.61 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 254 54.61 0) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "65176011-8e4a-466d-b5eb-0012c0aa8023")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "#PWR0115") (unit 1))))) (symbol (lib_id "power:GND") (at 128.27 55.88 0) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced yes) (uuid "ba927458-14a9-4bb5-988c-8c8ee4e370d6") (property "Reference" "#PWR0107" (at 128.27 62.23 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Value" "GND" (at 128.27 60.96 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 128.27 55.88 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "" (at 128.27 55.88 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 128.27 55.88 0) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "b64aa85b-c13f-4d17-8d41-c3be2cbb7a2c")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "#PWR0107") (unit 1))))) (symbol (lib_id "Connector:Conn_01x01_Pin") (at 167.64 39.37 90) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "c623b86b-7f7f-40b9-93e6-26635740e815") (property "Reference" "VCC_A2" (at 167.64 39.37 0) (effects (font (size 1.27 1.27)) (justify right))) (property "Value" "Conn_01x01_Pin" (at 168.91 40.005 90) (effects (font (size 1.27 1.27)) (justify right) (hide yes))) (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" (at 167.64 39.37 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 167.64 39.37 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 167.64 39.37 0) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "74392829-b572-4043-b75c-ce94c7303916")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "VCC_A2") (unit 1))))) (symbol (lib_id "Connector:Conn_01x01_Pin") (at 254 107.95 90) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "c6463406-90eb-4918-8130-603a8949491f") (property "Reference" "GND_T1" (at 254 107.95 0) (effects (font (size 1.27 1.27)) (justify right))) (property "Value" "Conn_01x01_Pin" (at 255.27 108.585 90) (effects (font (size 1.27 1.27)) (justify right) (hide yes))) (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" (at 254 107.95 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 254 107.95 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 254 107.95 0) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "dc641fdf-29e7-48f6-a8bd-98631f77428a")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "GND_T1") (unit 1))))) (symbol (lib_id "power:GND") (at 176.53 43.18 0) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "c826f725-7fac-419e-a838-77c3ddd24776") (property "Reference" "#PWR?" (at 176.53 40.64 0) (effects (font (size 1.27 1.27)))) (property "Value" "GND" (at 176.53 45.72 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 176.53 43.18 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 176.53 43.18 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 176.53 43.18 0) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "98716072-2d75-48d9-bd28-320352bc7e95")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "#PWR?") (unit 1))))) (symbol (lib_id "Connector:Conn_01x01_Pin") (at 259.08 125.73 90) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "caa6c8b8-ee7b-44c3-a728-7e55c5ac92d4") (property "Reference" "X3A1" (at 259.08 125.73 0) (effects (font (size 1.27 1.27)) (justify right))) (property "Value" "Conn_01x01_Pin" (at 260.35 126.365 90) (effects (font (size 1.27 1.27)) (justify right) (hide yes))) (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" (at 259.08 125.73 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 259.08 125.73 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 259.08 125.73 0) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "ddde005c-04b1-441b-8f96-405d6365ad7a")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "X3A1") (unit 1))))) (symbol (lib_id "Connector:Conn_01x01_Pin") (at 133.35 127 90) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "cb6e0e92-8106-4918-9d8c-3e3013d6e7e1") (property "Reference" "X3B1" (at 133.35 127 0) (effects (font (size 1.27 1.27)) (justify right))) (property "Value" "Conn_01x01_Pin" (at 134.62 127.635 90) (effects (font (size 1.27 1.27)) (justify right) (hide yes))) (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" (at 133.35 127 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 133.35 127 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 133.35 127 0) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "83ee8894-d279-409f-872d-1bb4b54b4711")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "X3B1") (unit 1))))) (symbol (lib_id "Connector:Conn_01x01_Pin") (at 130.81 140.97 90) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "cf4c5d8d-0c85-43b3-b2ab-eff2610198e1") (property "Reference" "X1" (at 130.81 140.97 0) (effects (font (size 1.27 1.27)) (justify right))) (property "Value" "Conn_01x01_Pin" (at 132.08 141.605 90) (effects (font (size 1.27 1.27)) (justify right) (hide yes))) (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" (at 130.81 140.97 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 130.81 140.97 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 130.81 140.97 0) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "ede1e98a-7f1e-4164-9b48-4f99624e3fdb")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "X1") (unit 1))))) (symbol (lib_id "Device:C_Polarized") (at 120.65 50.8 0) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "d1189f40-af74-4922-94ba-fe238cf5f19c") (property "Reference" "C9" (at 120.65 48.26 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "47uF 35v" (at 115.57 53.34 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "C47u35v:CAPPRD200W50D525H1250" (at 121.6152 54.61 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 120.65 50.8 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 120.65 50.8 0) (effects (font (size 1.27 1.27)))) (pin "2" (uuid "21347f6b-880b-454c-b525-e7b32506f81a")) (pin "1" (uuid "e6fee27c-9b54-4d6a-af33-e23eae7903bd")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "C9") (unit 1))))) (symbol (lib_id "power:GND") (at 45.72 76.2 0) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "d2d03453-a471-47e3-b8a0-21c302ee4b55") (property "Reference" "#PWR0101" (at 45.72 82.55 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Value" "GND" (at 45.72 81.28 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 45.72 76.2 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "" (at 45.72 76.2 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 45.72 76.2 0) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "d5bd19b3-cf01-497e-9f3d-63ee2e537d2d")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "#PWR0101") (unit 1))))) (symbol (lib_id "Connector:Conn_01x01_Pin") (at 152.4 66.04 0) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "dc9beee8-362a-431f-ae58-61cdcb6832dc") (property "Reference" "GND_A1" (at 152.4 66.04 0) (effects (font (size 1.27 1.27)) (justify right))) (property "Value" "Conn_01x01_Pin" (at 151.765 67.31 90) (effects (font (size 1.27 1.27)) (justify right) (hide yes))) (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" (at 152.4 66.04 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 152.4 66.04 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 152.4 66.04 0) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "384d9e59-0cf8-4a8b-8799-c7ed8eb90760")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "GND_A1") (unit 1))))) (symbol (lib_id "Device:R") (at 64.77 40.64 0) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "dffbb023-66a6-4908-bab6-7170bcf5a1bb") (property "Reference" "R18" (at 64.77 36.83 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "47K" (at 64.77 44.45 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 62.992 40.64 90) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 64.77 40.64 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 64.77 40.64 0) (effects (font (size 1.27 1.27)))) (pin "2" (uuid "d03037c0-1efd-4222-9884-4ef4e95956c7")) (pin "1" (uuid "18557c98-42f0-44bd-8418-c4ad8636e6c1")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "R18") (unit 1))))) (symbol (lib_id "OPA1642AID:OPA1642AID") (at 81.28 91.44 0) (mirror x) (unit 2) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "e46d3b5f-0bed-4df1-a7ff-7fb3e0496ac5") (property "Reference" "IC2" (at 82.55 87.63 0) (effects (font (size 1.27 1.27)))) (property "Value" "OPA1642AID" (at 86.36 95.25 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "opa1642:SOIC127P600X175-8N" (at 81.28 91.44 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "Datasheet" "" (at 81.28 91.44 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "\n \n Dual SoundPlus™ high-performance, JFET-input audio op amp\n \n" (at 81.28 91.44 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "MF" "Texas Instruments" (at 81.28 91.44 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "MAXIMUM_PACKAGE_HEIGHT" "1.75 mm" (at 81.28 91.44 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "Package" "SOIC-8 Texas Instruments" (at 81.28 91.44 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "Price" "None" (at 81.28 91.44 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "Check_prices" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=eda" (at 81.28 91.44 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "STANDARD" "IPC 7351B" (at 81.28 91.44 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "PARTREV" "D" (at 81.28 91.44 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "SnapEDA_Link" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=snap" (at 81.28 91.44 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "MP" "OPA1642AID" (at 81.28 91.44 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "Availability" "In Stock" (at 81.28 91.44 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (property "MANUFACTURER" "Texas Instruments" (at 81.28 91.44 0) (effects (font (size 1.27 1.27)) (justify bottom) (hide yes))) (pin "1" (uuid "8eb7a723-ff49-4e64-bcff-d54dedebf6df")) (pin "7" (uuid "c8f04e9e-37cd-44d0-befd-fa1c054349ef")) (pin "4" (uuid "5ea9edc8-d7e5-498d-a5e1-f4d8f0e59842")) (pin "2" (uuid "223a6f4e-dc79-479d-8844-0b96b300e0c7")) (pin "6" (uuid "c36582c0-b02a-453d-9f70-9abbd6fba04b")) (pin "8" (uuid "30ff56b3-f2da-4beb-89d7-da61228bd145")) (pin "3" (uuid "bf170eff-2b68-464c-8e53-81064b7f76b2")) (pin "5" (uuid "1c1b288a-a713-40eb-8869-436701df4af8")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "IC2") (unit 2))))) (symbol (lib_id "power:GND") (at 250.19 102.87 0) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced yes) (uuid "e53bcdf9-738a-48e4-a152-a14a08270ebd") (property "Reference" "#PWR0114" (at 250.19 109.22 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Value" "GND" (at 250.19 107.95 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 250.19 102.87 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "" (at 250.19 102.87 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 250.19 102.87 0) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "c624e79d-a3f3-4f3c-98ab-5bbe94e84744")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "#PWR0114") (unit 1))))) (symbol (lib_id "Device:R") (at 247.65 66.04 90) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "e7bc09ca-c05b-46b5-a6ac-36183d8d76a3") (property "Reference" "R2" (at 242.57 67.31 90) (effects (font (size 1.27 1.27)))) (property "Value" "47" (at 251.46 67.31 90) (effects (font (size 1.27 1.27)))) (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 247.65 67.818 90) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 247.65 66.04 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 247.65 66.04 0) (effects (font (size 1.27 1.27)))) (pin "2" (uuid "811bcd25-7683-450d-a0f6-4cbf30fe16d7")) (pin "1" (uuid "b446f901-9264-4de1-a7f4-e94b77c4b7a7")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "R2") (unit 1))))) (symbol (lib_id "Device:C_Polarized") (at 176.53 38.1 0) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "e99cf364-578f-476c-924e-844a1b1a8e85") (property "Reference" "C7" (at 176.53 35.56 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "47uF 35v" (at 171.45 40.64 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "C47u35v:CAPPRD200W50D525H1250" (at 177.4952 41.91 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 176.53 38.1 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 176.53 38.1 0) (effects (font (size 1.27 1.27)))) (pin "2" (uuid "7fbc65c4-a622-4af7-8427-e54f1f86ba89")) (pin "1" (uuid "02fe146f-014e-4c3e-acf4-171e7ba0e1ca")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "C7") (unit 1))))) (symbol (lib_id "Device:R") (at 105.41 40.64 0) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "ecfd7613-45e7-4949-88b5-f33fd1e3a59e") (property "Reference" "R15" (at 105.41 36.83 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "330" (at 105.41 44.45 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 103.632 40.64 90) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 105.41 40.64 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 105.41 40.64 0) (effects (font (size 1.27 1.27)))) (pin "2" (uuid "ca1d0729-2505-4402-9f17-357bcc7bb1bb")) (pin "1" (uuid "0f86676d-62aa-41b0-b91a-cde645257906")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "R15") (unit 1))))) (symbol (lib_id "power:GND") (at 57.15 44.45 0) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "f6cb3d82-f698-47c9-b4a5-7d6c197cce6b") (property "Reference" "#PWR?" (at 57.15 41.91 0) (effects (font (size 1.27 1.27)))) (property "Value" "GND" (at 57.15 46.99 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 57.15 44.45 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 57.15 44.45 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 57.15 44.45 0) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "78c3d887-baba-422a-aa92-2cf9a2d56981")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "#PWR?") (unit 1))))) (symbol (lib_id "Device:R") (at 236.22 49.53 0) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "f8426791-547e-42ff-b8e0-5863e33d65fa") (property "Reference" "R3" (at 236.22 45.72 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Value" "2.2K" (at 236.22 53.34 0) (effects (font (size 1.27 1.27)) (justify left))) (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 234.442 49.53 90) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 236.22 49.53 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 236.22 49.53 0) (effects (font (size 1.27 1.27)))) (pin "2" (uuid "316da01b-6ffd-488d-82e6-871c663cd358")) (pin "1" (uuid "cab12070-cd00-4eeb-aa04-57f317411ced")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "R3") (unit 1))))) (symbol (lib_id "power:GND") (at 182.88 43.18 0) (unit 1) (exclude_from_sim no) (in_bom yes) (on_board yes) (dnp no) (uuid "faf0d463-3fd5-4414-bd12-c3fdcbe9c493") (property "Reference" "#PWR?" (at 182.88 40.64 0) (effects (font (size 1.27 1.27)))) (property "Value" "GND" (at 182.88 45.72 0) (effects (font (size 1.27 1.27)))) (property "Footprint" "" (at 182.88 43.18 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Datasheet" "~" (at 182.88 43.18 0) (effects (font (size 1.27 1.27)) (hide yes))) (property "Description" "" (at 182.88 43.18 0) (effects (font (size 1.27 1.27)))) (pin "1" (uuid "35ab5bfa-400d-4cd7-a31a-fc9054a076b6")) (instances (project "mic_preamp_pcb_prototype_p2" (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" (reference "#PWR?") (unit 1))))) (wire (pts (xy 160.02 63.5) (xy 161.29 63.50000000000001)) (stroke (width 0) (type default)) (uuid "d475590d-7b97-49c4-8f2a-98b4e23e4d48")) (wire (pts (xy 181.60999999999999 66.04) (xy 181.61 76.2)) (stroke (width 0) (type default)) (uuid "0565cdab-26be-4d1d-8449-1d4124f1fbf8")) (wire (pts (xy 181.61 76.2) (xy 154.94 76.2)) (stroke (width 0) (type default)) (uuid "1e1d27a7-b6c3-4b9b-a9ce-43caab6d1544")) (wire (pts (xy 154.94 76.2) (xy 154.94 68.58)) (stroke (width 0) (type default)) (uuid "5a6f4d09-e05c-466f-bfd9-d4751989493e")) (wire (pts (xy 154.94 68.58) (xy 161.29 68.58000000000001)) (stroke (width 0) (type default)) (uuid "f0f7cc64-e280-4861-a19a-a5ad43ece2a9")) (wire (pts (xy 34.29 64.77) (xy 35.56 64.77)) (stroke (width 0) (type default)) (uuid "dbd83d6f-b1ee-4c61-93fb-eb37b25b47d8")) (wire (pts (xy 55.879999999999995 67.31) (xy 55.88 77.47)) (stroke (width 0) (type default)) (uuid "66002d9b-f870-4e2e-8287-caebb877040d")) (wire (pts (xy 55.88 77.47) (xy 27.94 77.47)) (stroke (width 0) (type default)) (uuid "913f5db0-3ff7-46a1-b638-2cb3ff0218d0")) (wire (pts (xy 27.94 77.47) (xy 27.94 69.85)) (stroke (width 0) (type default)) (uuid "6efd6e14-09aa-4bfc-ab1a-1c579fa61e7a")) (wire (pts (xy 27.94 69.85) (xy 35.56 69.85000000000001)) (stroke (width 0) (type default)) (uuid "19233f57-c431-41c2-9ba0-d536364d7043")) (sheet_instances (path "/" (page "1"))) (embedded_fonts no)) \ No newline at end of file diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/mic_preamp_pcb_prototype_p2.kicad_sch.before-final-fix-2026-04-23 b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/mic_preamp_pcb_prototype_p2.kicad_sch.before-final-fix-2026-04-23 new file mode 100644 index 0000000..b62876a --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/mic_preamp_pcb_prototype_p2.kicad_sch.before-final-fix-2026-04-23 @@ -0,0 +1,8855 @@ +(kicad_sch + (version 20250114) + (generator "eeschema") + (generator_version "9.0") + (uuid "dde26cd9-6a98-439e-b5e9-17da5761ec2e") + (paper "A4") + (lib_symbols + (symbol "Connector:Conn_01x01_Pin" + (pin_names + (offset 1.016) + (hide yes) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "J" + (at 0 2.54 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "Conn_01x01_Pin" + (at 0 -2.54 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Generic connector, single row, 01x01, script generated" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_locked" "" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "ki_keywords" "connector" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "Connector*:*_1x??_*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "Conn_01x01_Pin_1_1" + (rectangle + (start 0.8636 0.127) + (end 0 -0.127) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type outline) + ) + ) + (polyline + (pts + (xy 1.27 0) (xy 0.8636 0) + ) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (pin passive line + (at 5.08 0 180) + (length 3.81) + (name "Pin_1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Connector_Generic:Conn_01x01" + (pin_names + (offset 1.016) + (hide yes) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "J" + (at 0 2.54 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "Conn_01x01" + (at 0 -2.54 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Generic connector, single row, 01x01, script generated (kicad-library-utils/schlib/autogen/connector/)" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "connector" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "Connector*:*_1x??_*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "Conn_01x01_1_1" + (rectangle + (start -1.27 1.27) + (end 1.27 -1.27) + (stroke + (width 0.254) + (type default) + ) + (fill + (type background) + ) + ) + (rectangle + (start -1.27 0.127) + (end 0 -0.127) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (pin passive line + (at -5.08 0 0) + (length 3.81) + (name "Pin_1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Device:C" + (pin_numbers + (hide yes) + ) + (pin_names + (offset 0.254) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "C" + (at 0.635 2.54 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "C" + (at 0.635 -2.54 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "" + (at 0.9652 -3.81 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Unpolarized capacitor" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "cap capacitor" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "C_*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "C_0_1" + (polyline + (pts + (xy -2.032 0.762) (xy 2.032 0.762) + ) + (stroke + (width 0.508) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -2.032 -0.762) (xy 2.032 -0.762) + ) + (stroke + (width 0.508) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "C_1_1" + (pin passive line + (at 0 3.81 270) + (length 2.794) + (name "~" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 0 -3.81 90) + (length 2.794) + (name "~" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Device:C_Polarized" + (pin_numbers + (hide yes) + ) + (pin_names + (offset 0.254) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "C" + (at 0.635 2.54 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "C_Polarized" + (at 0.635 -2.54 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "" + (at 0.9652 -3.81 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Polarized capacitor" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "cap capacitor" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "CP_*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "C_Polarized_0_1" + (rectangle + (start -2.286 0.508) + (end 2.286 1.016) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -1.778 2.286) (xy -0.762 2.286) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -1.27 2.794) (xy -1.27 1.778) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (rectangle + (start 2.286 -0.508) + (end -2.286 -1.016) + (stroke + (width 0) + (type default) + ) + (fill + (type outline) + ) + ) + ) + (symbol "C_Polarized_1_1" + (pin passive line + (at 0 3.81 270) + (length 2.794) + (name "~" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 0 -3.81 90) + (length 2.794) + (name "~" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Device:D" + (pin_numbers + (hide yes) + ) + (pin_names + (offset 1.016) + (hide yes) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "D" + (at 0 2.54 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "D" + (at 0 -2.54 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Diode" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Sim.Device" "D" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Sim.Pins" "1=K 2=A" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "diode" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "TO-???* *_Diode_* *SingleDiode* D_*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "D_0_1" + (polyline + (pts + (xy -1.27 1.27) (xy -1.27 -1.27) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 1.27 1.27) (xy 1.27 -1.27) (xy -1.27 0) (xy 1.27 1.27) + ) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 1.27 0) (xy -1.27 0) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "D_1_1" + (pin passive line + (at -3.81 0 0) + (length 2.54) + (name "K" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 3.81 0 180) + (length 2.54) + (name "A" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "Device:R" + (pin_numbers + (hide yes) + ) + (pin_names + (offset 0) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "R" + (at 2.032 0 90) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "R" + (at 0 0 90) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at -1.778 0 90) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Resistor" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "R res resistor" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_fp_filters" "R_*" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "R_0_1" + (rectangle + (start -1.016 -2.54) + (end 1.016 2.54) + (stroke + (width 0.254) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "R_1_1" + (pin passive line + (at 0 3.81 270) + (length 1.27) + (name "~" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + (pin passive line + (at 0 -3.81 90) + (length 1.27) + (name "~" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "2" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "OPA1642AID:OPA1642AID" + (pin_names + (offset 1.016) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "U" + (at 2.54 3.175 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + ) + (property "Value" "OPA1642AID" + (at 2.54 -5.08 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left bottom) + ) + ) + (property "Footprint" "OPA1642AID:SOIC127P599X175-8N" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Dual SoundPlus™ high-performance, JFET-input audio op amp" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "MF" "Texas Instruments" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "MAXIMUM_PACKAGE_HEIGHT" "1.75 mm" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "Package" "SOIC-8 Texas Instruments" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "Price" "None" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "Check_prices" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=eda" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "STANDARD" "IPC 7351B" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "PARTREV" "D" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "SnapEDA_Link" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=snap" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "MP" "OPA1642AID" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "Availability" "In Stock" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "MANUFACTURER" "Texas Instruments" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (symbol "OPA1642AID_1_0" + (polyline + (pts + (xy -5.08 5.08) (xy -5.08 -5.08) + ) + (stroke + (width 0.4064) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -5.08 -5.08) (xy 5.08 0) + ) + (stroke + (width 0.4064) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -4.445 2.54) (xy -3.175 2.54) + ) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -4.445 -2.54) (xy -3.175 -2.54) + ) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -3.81 -1.905) (xy -3.81 -3.175) + ) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 5.08 0) (xy -5.08 5.08) + ) + (stroke + (width 0.4064) + (type default) + ) + (fill + (type none) + ) + ) + (text "V+" + (at 1.27 3.175 900) + (effects + (font + (size 0.8128 0.8128) + ) + (justify left bottom) + ) + ) + (text "V-" + (at 1.27 -4.826 900) + (effects + (font + (size 0.8128 0.8128) + ) + (justify left bottom) + ) + ) + (pin input line + (at -10.16 2.54 0) + (length 5.08) + (name "~" + (effects + (font + (size 1.016 1.016) + ) + ) + ) + (number "2" + (effects + (font + (size 1.016 1.016) + ) + ) + ) + ) + (pin input line + (at -10.16 -2.54 0) + (length 5.08) + (name "~" + (effects + (font + (size 1.016 1.016) + ) + ) + ) + (number "3" + (effects + (font + (size 1.016 1.016) + ) + ) + ) + ) + (pin power_in line + (at 0 7.62 270) + (length 5.08) + (name "~" + (effects + (font + (size 1.016 1.016) + ) + ) + ) + (number "8" + (effects + (font + (size 1.016 1.016) + ) + ) + ) + ) + (pin power_in line + (at 0 -7.62 90) + (length 5.08) + (name "~" + (effects + (font + (size 1.016 1.016) + ) + ) + ) + (number "4" + (effects + (font + (size 1.016 1.016) + ) + ) + ) + ) + (pin output line + (at 10.16 0 180) + (length 5.08) + (name "~" + (effects + (font + (size 1.016 1.016) + ) + ) + ) + (number "1" + (effects + (font + (size 1.016 1.016) + ) + ) + ) + ) + ) + (symbol "OPA1642AID_2_0" + (polyline + (pts + (xy -5.08 5.08) (xy -5.08 -5.08) + ) + (stroke + (width 0.4064) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -5.08 -5.08) (xy 5.08 0) + ) + (stroke + (width 0.4064) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -4.445 2.54) (xy -3.175 2.54) + ) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -4.445 -2.54) (xy -3.175 -2.54) + ) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -3.81 -1.905) (xy -3.81 -3.175) + ) + (stroke + (width 0.1524) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 5.08 0) (xy -5.08 5.08) + ) + (stroke + (width 0.4064) + (type default) + ) + (fill + (type none) + ) + ) + (pin input line + (at -10.16 2.54 0) + (length 5.08) + (name "~" + (effects + (font + (size 1.016 1.016) + ) + ) + ) + (number "6" + (effects + (font + (size 1.016 1.016) + ) + ) + ) + ) + (pin input line + (at -10.16 -2.54 0) + (length 5.08) + (name "~" + (effects + (font + (size 1.016 1.016) + ) + ) + ) + (number "5" + (effects + (font + (size 1.016 1.016) + ) + ) + ) + ) + (pin output line + (at 10.16 0 180) + (length 5.08) + (name "~" + (effects + (font + (size 1.016 1.016) + ) + ) + ) + (number "7" + (effects + (font + (size 1.016 1.016) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "power:Earth" + (power) + (pin_names + (offset 0) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "#PWR" + (at 0 -6.35 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Value" "Earth" + (at 0 -3.81 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Footprint" "" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Power symbol creates a global label with name \"Earth\"" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "global ground gnd" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "Earth_0_1" + (polyline + (pts + (xy -0.635 -1.905) (xy 0.635 -1.905) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy -0.127 -2.54) (xy 0.127 -2.54) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 0 -1.27) (xy 0 0) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + (polyline + (pts + (xy 1.27 -1.27) (xy -1.27 -1.27) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "Earth_1_1" + (pin power_in line + (at 0 0 270) + (length 0) + (hide yes) + (name "Earth" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + (symbol "power:GND" + (power) + (pin_names + (offset 0) + ) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (property "Reference" "#PWR" + (at 0 -6.35 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Value" "GND" + (at 0 -3.81 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "Power symbol creates a global label with name \"GND\" , ground" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "ki_keywords" "global power" + (at 0 0 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (symbol "GND_0_1" + (polyline + (pts + (xy 0 0) (xy 0 -1.27) (xy 1.27 -1.27) (xy 0 -2.54) (xy -1.27 -1.27) (xy 0 -1.27) + ) + (stroke + (width 0) + (type default) + ) + (fill + (type none) + ) + ) + ) + (symbol "GND_1_1" + (pin power_in line + (at 0 0 270) + (length 0) + (hide yes) + (name "GND" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (number "1" + (effects + (font + (size 1.27 1.27) + ) + ) + ) + ) + ) + (embedded_fonts no) + ) + ) + (text "Cabler par NUMERO DE PIN, jamais par position visuelle. Topologie AliceOPA = suiveur (IC*A) + inverseur unitaire (IC*B). Ref DJJules." + (exclude_from_sim no) + (at 100 25 0) + (effects + (font + (size 1.524 1.524) + ) + (justify left bottom) + ) + (uuid "2f27fc85-2db6-4634-b1d0-556b6bfa00eb") + ) + (text "ATTENTION OPA1642AID (SnapEDA): + IN visuellement EN BAS (pin 3 sur IC*A, pin 5 sur IC*B), - IN EN HAUT (pin 2 sur IC*A, pin 6 sur IC*B)" + (exclude_from_sim no) + (at 100 22 0) + (effects + (font + (size 1.524 1.524) + ) + (justify left bottom) + ) + (uuid "7f6c91a7-1382-4a57-98af-ac6239f97a4c") + ) + (text "canal B (IC2)" + (exclude_from_sim no) + (at 41 78 0) + (effects + (font + (size 1.524 1.524) + ) + (justify left bottom) + ) + (uuid "da0e6047-9e2c-4cb3-ab71-41d772680403") + ) + (text "canal A (IC1)" + (exclude_from_sim no) + (at 167 78 0) + (effects + (font + (size 1.524 1.524) + ) + (justify left bottom) + ) + (uuid "fe8aecfd-5870-4d86-a294-78b949670c9c") + ) + (junction + (at 176.53 33.02) + (diameter 0) + (color 0 0 0 0) + (uuid "00589357-8e78-4b48-ae28-55a325e7e60d") + ) + (junction + (at 57.15 34.29) + (diameter 0) + (color 0 0 0 0) + (uuid "09588201-8b42-44b7-819e-c8f5ab4dc089") + ) + (junction + (at 64.77 34.29) + (diameter 0) + (color 0 0 0 0) + (uuid "16b0b64c-300f-48e4-b5e3-6530295f7432") + ) + (junction + (at 110.49 45.72) + (diameter 0) + (color 0 0 0 0) + (uuid "1fedaa26-68d8-43e0-9f71-7347c3987ea2") + ) + (junction + (at 105.41 67.31) + (diameter 0) + (color 0 0 0 0) + (uuid "2197faeb-7074-4b3f-b0ae-c0c6950c6115") + ) + (junction + (at 182.88 33.02) + (diameter 0) + (color 0 0 0 0) + (uuid "22226dcb-761d-4e21-8926-5e3e670d73b4") + ) + (junction + (at 190.5 33.02) + (diameter 0) + (color 0 0 0 0) + (uuid "2b758264-7c69-4e0c-93be-2efbcb50a2c0") + ) + (junction + (at 92.71 91.44) + (diameter 0) + (color 0 0 0 0) + (uuid "2e7b2632-ec2f-4541-8baa-fe7738ac00ce") + ) + (junction + (at 130.81 102.87) + (diameter 0) + (color 0 0 0 0) + (uuid "31a0fa79-136a-44fe-886c-461ed761bcd9") + ) + (junction + (at 246.38 44.45) + (diameter 0) + (color 0 0 0 0) + (uuid "34017a92-c9bf-47c6-82c9-f179df22de8e") + ) + (junction + (at 69.85 48.26) + (diameter 0) + (color 0 0 0 0) + (uuid "3a063535-13d8-4452-8527-87ecc8b8bafd") + ) + (junction + (at 218.44 90.17) + (diameter 0) + (color 0 0 0 0) + (uuid "506c6fe0-54fc-4644-b472-af2712a66982") + ) + (junction + (at 50.8 34.29) + (diameter 0) + (color 0 0 0 0) + (uuid "52d16d23-5d99-4997-9606-6a432c5ed42c") + ) + (junction + (at 110.49 91.44) + (diameter 0) + (color 0 0 0 0) + (uuid "6e7975c6-e34f-49fe-8979-b54dde5b3afa") + ) + (junction + (at 135.89 45.72) + (diameter 0) + (color 0 0 0 0) + (uuid "7143fe68-cd97-4817-ad2c-119aed5e1e98") + ) + (junction + (at 219.71 96.52) + (diameter 0) + (color 0 0 0 0) + (uuid "72610660-92b2-4c67-9420-a83a3b6c5fe8") + ) + (junction + (at 160.02 63.5) + (diameter 0) + (color 0 0 0 0) + (uuid "7c17383d-56a7-44e5-a84d-f9087e67706a") + ) + (junction + (at 254 44.45) + (diameter 0) + (color 0 0 0 0) + (uuid "8b6bfe60-3dc6-4264-96f7-e3717e7adb54") + ) + (junction + (at 250.19 101.6) + (diameter 0) + (color 0 0 0 0) + (uuid "8c585ad5-91e8-4583-b2d8-0474483941bd") + ) + (junction + (at 130.81 134.62) + (diameter 0) + (color 0 0 0 0) + (uuid "9028dbdb-828c-44c9-8913-4012ea279758") + ) + (junction + (at 128.27 102.87) + (diameter 0) + (color 0 0 0 0) + (uuid "94ec2774-6ecc-4c4c-8ff7-25af5bc253b2") + ) + (junction + (at 254 101.6) + (diameter 0) + (color 0 0 0 0) + (uuid "96a9a85d-09cd-4d8c-a932-99a3f6e299fa") + ) + (junction + (at 261.62 44.45) + (diameter 0) + (color 0 0 0 0) + (uuid "9e1c806d-87fc-406a-a639-bcaeb441f29f") + ) + (junction + (at 190.5 46.99) + (diameter 0) + (color 0 0 0 0) + (uuid "a2e2e3ef-4659-4007-b817-ded43a82b6ad") + ) + (junction + (at 231.14 44.45) + (diameter 0) + (color 0 0 0 0) + (uuid "a7f346ae-f212-4dac-bed0-b846ad63e47e") + ) + (junction + (at 105.41 45.72) + (diameter 0) + (color 0 0 0 0) + (uuid "ac48b7f1-5297-4449-ba90-97fe45c07c15") + ) + (junction + (at 231.14 66.04) + (diameter 0) + (color 0 0 0 0) + (uuid "b77b5e27-f925-4c66-b4ba-d614a7032f1a") + ) + (junction + (at 171.45 33.02) + (diameter 0) + (color 0 0 0 0) + (uuid "bb063fe2-6534-4b28-99e0-da8d833215b1") + ) + (junction + (at 64.77 48.26) + (diameter 0) + (color 0 0 0 0) + (uuid "be418af7-2d0e-41ac-a848-fa5787a5fcd0") + ) + (junction + (at 45.72 34.29) + (diameter 0) + (color 0 0 0 0) + (uuid "c31e8219-696e-409a-8d87-dadc8b1a0d37") + ) + (junction + (at 93.98 97.79) + (diameter 0) + (color 0 0 0 0) + (uuid "c5697ae5-e8d7-4567-96b2-c46c35186d3b") + ) + (junction + (at 195.58 46.99) + (diameter 0) + (color 0 0 0 0) + (uuid "d20ebbb5-9e1b-439e-9109-a96a9c0da384") + ) + (junction + (at 128.27 45.72) + (diameter 0) + (color 0 0 0 0) + (uuid "d3939fce-7f5c-4b01-af8c-43fdf06aa9b4") + ) + (junction + (at 236.22 44.45) + (diameter 0) + (color 0 0 0 0) + (uuid "e1d9b8d6-2f6b-46b2-a5d7-a46c5f27b3ba") + ) + (junction + (at 34.29 64.77) + (diameter 0) + (color 0 0 0 0) + (uuid "e991ca0a-385e-45f3-b8db-5c612be6f19d") + ) + (junction + (at 236.22 90.17) + (diameter 0) + (color 0 0 0 0) + (uuid "eaa05d34-930c-4892-b0e5-6ea6106cf656") + ) + (junction + (at 120.65 45.72) + (diameter 0) + (color 0 0 0 0) + (uuid "f4b65052-dac7-4f36-bf7c-48aa76d3179f") + ) + (junction + (at 194.31 81.28) + (diameter 0) + (color 0 0 0 0) + (uuid "fb68e80d-0477-432b-9927-a247553d8d2d") + ) + (junction + (at 68.58 82.55) + (diameter 0) + (color 0 0 0 0) + (uuid "ffa8159e-09d6-41df-8412-f708e67ac562") + ) + (wire + (pts + (xy 181.61 66.04) (xy 181.61 59.69) + ) + (stroke + (width 0) + (type default) + ) + (uuid "0247d6f8-8bef-42bd-9758-5767f526b9e7") + ) + (wire + (pts + (xy 132.08 92.71) (xy 133.35 92.71) + ) + (stroke + (width 0) + (type default) + ) + (uuid "02ffd185-3759-49b3-8c77-2e0613d4dfc1") + ) + (wire + (pts + (xy 133.35 67.31) (xy 125.73 67.31) + ) + (stroke + (width 0) + (type default) + ) + (uuid "0356e5f5-98e0-41ac-986a-3a5c50e15865") + ) + (wire + (pts + (xy 171.45 73.66) (xy 171.45 74.93) + ) + (stroke + (width 0) + (type default) + ) + (uuid "04fa697f-ba4f-4896-9ec8-bc29f296ab27") + ) + (wire + (pts + (xy 261.62 45.72) (xy 261.62 44.45) + ) + (stroke + (width 0) + (type default) + ) + (uuid "054de042-36c6-466d-addf-52404f9a5cf5") + ) + (wire + (pts + (xy 132.08 91.44) (xy 125.73 91.44) + ) + (stroke + (width 0) + (type default) + ) + (uuid "07f957aa-8cbd-46c5-b269-0dd7732ae0b0") + ) + (wire + (pts + (xy 86.36 82.55) (xy 92.71 82.55) + ) + (stroke + (width 0) + (type default) + ) + (uuid "091a8572-79a5-4536-b85d-bab77e5807f6") + ) + (wire + (pts + (xy 196.85 92.71) (xy 194.31 92.71) + ) + (stroke + (width 0) + (type default) + ) + (uuid "0948c5ac-1f77-48ec-94a4-0f80cc03c66a") + ) + (wire + (pts + (xy 64.77 36.83) (xy 64.77 34.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "09bff6a2-4405-4b1c-b1c7-8770f1b83251") + ) + (wire + (pts + (xy 110.49 54.61) (xy 110.49 91.44) + ) + (stroke + (width 0) + (type default) + ) + (uuid "0a92ccac-a9ba-41ec-9130-6efa152b8c7c") + ) + (wire + (pts + (xy 120.65 45.72) (xy 128.27 45.72) + ) + (stroke + (width 0) + (type default) + ) + (uuid "0c093a6d-daaf-49d0-915e-5c6ba985c32f") + ) + (wire + (pts + (xy 71.12 93.98) (xy 68.58 93.98) + ) + (stroke + (width 0) + (type default) + ) + (uuid "0c103657-0555-49c9-8325-2766ddb6c34f") + ) + (wire + (pts + (xy 254 101.6) (xy 254 102.87) + ) + (stroke + (width 0) + (type default) + ) + (uuid "0c5e5cac-35ca-4a13-9be1-b006870f52be") + ) + (wire + (pts + (xy 182.88 41.91) (xy 182.88 43.18) + ) + (stroke + (width 0) + (type default) + ) + (uuid "0cce7c82-3eb4-4b62-871a-55f7b76e03fa") + ) + (wire + (pts + (xy 30.48 67.31) (xy 33.02 67.31) + ) + (stroke + (width 0) + (type default) + ) + (uuid "0d2f807f-742b-4768-94ba-95a2e0dbb27e") + ) + (wire + (pts + (xy 194.31 92.71) (xy 194.31 81.28) + ) + (stroke + (width 0) + (type default) + ) + (uuid "0dcc1259-f63a-4cdb-8738-f5795f1b3254") + ) + (wire + (pts + (xy 160.02 49.53) (xy 160.02 46.99) + ) + (stroke + (width 0) + (type default) + ) + (uuid "0e08d303-8030-47a4-80b3-c8e23305f124") + ) + (wire + (pts + (xy 135.89 68.58) (xy 135.89 121.92) + ) + (stroke + (width 0) + (type default) + ) + (uuid "0ecd9114-c5f3-41b1-bbaf-d0bf23bf8c72") + ) + (wire + (pts + (xy 69.85 88.9) (xy 69.85 48.26) + ) + (stroke + (width 0) + (type default) + ) + (uuid "0f14fdbd-45c6-4587-9179-a25b05c2e830") + ) + (wire + (pts + (xy 110.49 46.99) (xy 110.49 45.72) + ) + (stroke + (width 0) + (type default) + ) + (uuid "12318da3-5c3c-4ee8-be25-587a325bb671") + ) + (wire + (pts + (xy 60.96 78.74) (xy 60.96 67.31) + ) + (stroke + (width 0) + (type default) + ) + (uuid "138e04ba-8341-4806-8646-083545aec23c") + ) + (wire + (pts + (xy 130.81 102.87) (xy 130.81 134.62) + ) + (stroke + (width 0) + (type default) + ) + (uuid "14914217-99a2-4d1d-a175-3837138c9f9d") + ) + (wire + (pts + (xy 190.5 43.18) (xy 190.5 46.99) + ) + (stroke + (width 0) + (type default) + ) + (uuid "149d755e-650f-464a-b013-2877ffe94d53") + ) + (wire + (pts + (xy 167.64 33.02) (xy 167.64 34.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "1612cd4b-7389-451b-b032-7c60262b86ba") + ) + (wire + (pts + (xy 158.75 96.52) (xy 158.75 66.04) + ) + (stroke + (width 0) + (type default) + ) + (uuid "17c7e460-170d-43ec-9eda-22024b3b9d49") + ) + (wire + (pts + (xy 175.26 80.01) (xy 184.15 80.01) + ) + (stroke + (width 0) + (type default) + ) + (uuid "186588e2-1b6c-4fc6-b4ab-2a2de861743d") + ) + (wire + (pts + (xy 64.77 44.45) (xy 64.77 48.26) + ) + (stroke + (width 0) + (type default) + ) + (uuid "19585c84-7781-4da6-b4c5-c2bb13cc74af") + ) + (wire + (pts + (xy 195.58 46.99) (xy 219.71 46.99) + ) + (stroke + (width 0) + (type default) + ) + (uuid "1eba57e1-ae3d-47e1-9db3-7eb057abc06d") + ) + (wire + (pts + (xy 93.98 48.26) (xy 93.98 49.53) + ) + (stroke + (width 0) + (type default) + ) + (uuid "1f841559-9f10-4f15-a62a-5f8e9b558097") + ) + (wire + (pts + (xy 30.48 64.77) (xy 34.29 64.77) + ) + (stroke + (width 0) + (type default) + ) + (uuid "1f90ebaf-5381-4215-87a7-0678b5409152") + ) + (wire + (pts + (xy 181.61 66.04) (xy 220.98 66.04) + ) + (stroke + (width 0) + (type default) + ) + (uuid "20e1f14e-246f-408b-9bc9-45a3480af913") + ) + (wire + (pts + (xy 246.38 44.45) (xy 254 44.45) + ) + (stroke + (width 0) + (type default) + ) + (uuid "22cb0afe-5c07-4150-8264-9d54a11f4480") + ) + (wire + (pts + (xy 45.72 34.29) (xy 41.91 34.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "2373e140-4aee-4605-bb6d-a1aa0003ca85") + ) + (wire + (pts + (xy 92.71 82.55) (xy 92.71 91.44) + ) + (stroke + (width 0) + (type default) + ) + (uuid "2387ac61-6080-40df-9809-adfa32c9436d") + ) + (wire + (pts + (xy 267.97 45.72) (xy 267.97 44.45) + ) + (stroke + (width 0) + (type default) + ) + (uuid "24a76783-3bad-4ee9-aefe-a83c1207056d") + ) + (wire + (pts + (xy 130.81 134.62) (xy 130.81 135.89) + ) + (stroke + (width 0) + (type default) + ) + (uuid "2640e604-e51f-4854-b146-214b7487dbf8") + ) + (wire + (pts + (xy 160.02 63.5) (xy 160.02 68.58) + ) + (stroke + (width 0) + (type default) + ) + (uuid "26cda222-ce4c-4e30-b0b5-9cc4b4b99f79") + ) + (wire + (pts + (xy 245.11 101.6) (xy 250.19 101.6) + ) + (stroke + (width 0) + (type default) + ) + (uuid "2995443d-90a6-43a8-a5f9-059384375554") + ) + (wire + (pts + (xy 64.77 48.26) (xy 64.77 49.53) + ) + (stroke + (width 0) + (type default) + ) + (uuid "2a885e5e-7d91-4b49-82e4-0cb3564efb77") + ) + (wire + (pts + (xy 105.41 67.31) (xy 118.11 67.31) + ) + (stroke + (width 0) + (type default) + ) + (uuid "2b091d4b-29fd-474e-baf6-eb6d449ae010") + ) + (wire + (pts + (xy 231.14 43.18) (xy 231.14 44.45) + ) + (stroke + (width 0) + (type default) + ) + (uuid "2b42269e-c0f6-4ee1-a79a-ed49f1b423bc") + ) + (wire + (pts + (xy 55.88 67.31) (xy 55.88 60.96) + ) + (stroke + (width 0) + (type default) + ) + (uuid "2c7106d4-24d7-4f95-9af3-b2fcace368d1") + ) + (wire + (pts + (xy 261.62 44.45) (xy 254 44.45) + ) + (stroke + (width 0) + (type default) + ) + (uuid "2e57848c-6b0d-4203-afc5-11e7b17d4656") + ) + (wire + (pts + (xy 231.14 66.04) (xy 243.84 66.04) + ) + (stroke + (width 0) + (type default) + ) + (uuid "2f88aafa-1904-4b74-8678-eaf51e21ff15") + ) + (wire + (pts + (xy 110.49 45.72) (xy 120.65 45.72) + ) + (stroke + (width 0) + (type default) + ) + (uuid "307b7763-560b-4081-a5b0-4d9432cf7c90") + ) + (wire + (pts + (xy 142.24 46.99) (xy 142.24 45.72) + ) + (stroke + (width 0) + (type default) + ) + (uuid "3258f2e1-c35e-4c31-b4e2-df37c4b55397") + ) + (wire + (pts + (xy 92.71 91.44) (xy 95.25 91.44) + ) + (stroke + (width 0) + (type default) + ) + (uuid "33dc630f-6894-453f-ba6d-227a76c7dfb7") + ) + (wire + (pts + (xy 105.41 54.61) (xy 105.41 67.31) + ) + (stroke + (width 0) + (type default) + ) + (uuid "343dcd1d-c956-4e75-b567-a0342845ebaf") + ) + (wire + (pts + (xy 133.35 92.71) (xy 133.35 121.92) + ) + (stroke + (width 0) + (type default) + ) + (uuid "3502f113-0881-4463-86a6-57a628a4d65c") + ) + (wire + (pts + (xy 35.56 60.96) (xy 35.56 64.77) + ) + (stroke + (width 0) + (type default) + ) + (uuid "3554428c-6f8b-465c-b90d-98df200be2ed") + ) + (wire + (pts + (xy 171.45 33.02) (xy 167.64 33.02) + ) + (stroke + (width 0) + (type default) + ) + (uuid "36b94fa8-f95c-4830-b262-b1f0930cdfec") + ) + (wire + (pts + (xy 105.41 34.29) (xy 105.41 36.83) + ) + (stroke + (width 0) + (type default) + ) + (uuid "3f2a71ad-7543-4d78-ace7-ec7c6a72ede5") + ) + (wire + (pts + (xy 250.19 101.6) (xy 254 101.6) + ) + (stroke + (width 0) + (type default) + ) + (uuid "3fec9f90-1e3f-4ac1-af8d-3c01828ca098") + ) + (wire + (pts + (xy 142.24 45.72) (xy 135.89 45.72) + ) + (stroke + (width 0) + (type default) + ) + (uuid "44f75a8f-3922-464d-a9cb-247c27a22aaf") + ) + (wire + (pts + (xy 160.02 68.58) (xy 161.29 68.58) + ) + (stroke + (width 0) + (type default) + ) + (uuid "469dde99-a417-453c-b6a0-247bc0c06923") + ) + (wire + (pts + (xy 246.38 53.34) (xy 246.38 54.61) + ) + (stroke + (width 0) + (type default) + ) + (uuid "46b0c5b1-32e8-4b1f-a59f-9361200bbe71") + ) + (wire + (pts + (xy 231.14 33.02) (xy 231.14 35.56) + ) + (stroke + (width 0) + (type default) + ) + (uuid "46f7a7ce-f6f7-434e-adda-6d0b3c9625db") + ) + (wire + (pts + (xy 190.5 46.99) (xy 195.58 46.99) + ) + (stroke + (width 0) + (type default) + ) + (uuid "4ba3aedf-1589-47c6-9ebb-e7f82290d39d") + ) + (wire + (pts + (xy 195.58 87.63) (xy 195.58 46.99) + ) + (stroke + (width 0) + (type default) + ) + (uuid "4c8dd0ec-3ab0-447a-baad-4b8912ad9086") + ) + (wire + (pts + (xy 160.02 46.99) (xy 190.5 46.99) + ) + (stroke + (width 0) + (type default) + ) + (uuid "4ce29b5f-6b0d-4784-a4b4-2367ea534650") + ) + (wire + (pts + (xy 182.88 81.28) (xy 194.31 81.28) + ) + (stroke + (width 0) + (type default) + ) + (uuid "4e5e987c-6db3-4385-bfef-de2b0082abf6") + ) + (wire + (pts + (xy 257.81 90.17) (xy 251.46 90.17) + ) + (stroke + (width 0) + (type default) + ) + (uuid "4ee2dd63-ff0d-448c-985c-512662b0677e") + ) + (wire + (pts + (xy 128.27 46.99) (xy 128.27 45.72) + ) + (stroke + (width 0) + (type default) + ) + (uuid "5094e56d-01bf-4fbe-9ab6-6e2261a6778c") + ) + (wire + (pts + (xy 171.45 33.02) (xy 171.45 58.42) + ) + (stroke + (width 0) + (type default) + ) + (uuid "50c5c928-9226-4ccd-86c8-f441f4c823c0") + ) + (wire + (pts + (xy 110.49 91.44) (xy 118.11 91.44) + ) + (stroke + (width 0) + (type default) + ) + (uuid "50d74203-3acf-48ab-9ab4-9cd967bb8eda") + ) + (wire + (pts + (xy 176.53 33.02) (xy 182.88 33.02) + ) + (stroke + (width 0) + (type default) + ) + (uuid "5282bfdc-ba1d-49f1-bd41-c878cb71e66f") + ) + (wire + (pts + (xy 218.44 90.17) (xy 220.98 90.17) + ) + (stroke + (width 0) + (type default) + ) + (uuid "52d0ae17-05e5-427e-9a4e-f688b490a3d6") + ) + (wire + (pts + (xy 34.29 50.8) (xy 34.29 48.26) + ) + (stroke + (width 0) + (type default) + ) + (uuid "54716c51-f35b-4e7a-b401-b965c48846e9") + ) + (wire + (pts + (xy 120.65 54.61) (xy 120.65 55.88) + ) + (stroke + (width 0) + (type default) + ) + (uuid "5651c2dd-828f-4db3-b5f0-c2517dfad025") + ) + (wire + (pts + (xy 195.58 87.63) (xy 196.85 87.63) + ) + (stroke + (width 0) + (type default) + ) + (uuid "568335cf-e2ea-411d-97a3-ee936bfa35fd") + ) + (wire + (pts + (xy 93.98 97.79) (xy 130.81 97.79) + ) + (stroke + (width 0) + (type default) + ) + (uuid "56cfe013-4549-4aed-b51f-fd23cdd4317e") + ) + (wire + (pts + (xy 254 45.72) (xy 254 44.45) + ) + (stroke + (width 0) + (type default) + ) + (uuid "57534347-04b0-4ede-a7f5-b7f0614f969c") + ) + (wire + (pts + (xy 212.09 81.28) (xy 218.44 81.28) + ) + (stroke + (width 0) + (type default) + ) + (uuid "588917aa-2b57-4704-8692-b6cbddae4b93") + ) + (wire + (pts + (xy 228.6 66.04) (xy 231.14 66.04) + ) + (stroke + (width 0) + (type default) + ) + (uuid "5d9b100c-15eb-49b8-99fa-5122b7a9e260") + ) + (wire + (pts + (xy 236.22 90.17) (xy 243.84 90.17) + ) + (stroke + (width 0) + (type default) + ) + (uuid "5f3db4a8-9552-4076-91b7-c376c4b9dfd0") + ) + (wire + (pts + (xy 254 101.6) (xy 256.54 101.6) + ) + (stroke + (width 0) + (type default) + ) + (uuid "5f97aa97-7bab-43ce-a33c-31d0b7be2ec8") + ) + (wire + (pts + (xy 45.72 74.93) (xy 45.72 76.2) + ) + (stroke + (width 0) + (type default) + ) + (uuid "5fd5e64a-f9a8-4402-851f-a357c91335b0") + ) + (wire + (pts + (xy 256.54 101.6) (xy 256.54 96.52) + ) + (stroke + (width 0) + (type default) + ) + (uuid "602aee30-db48-4e11-afcd-c2ca5b2c774f") + ) + (wire + (pts + (xy 133.35 68.58) (xy 135.89 68.58) + ) + (stroke + (width 0) + (type default) + ) + (uuid "6250034d-badf-4beb-89bb-bd15b05aa371") + ) + (wire + (pts + (xy 68.58 93.98) (xy 68.58 82.55) + ) + (stroke + (width 0) + (type default) + ) + (uuid "642834c3-92d1-4978-a38c-9c0073735e66") + ) + (wire + (pts + (xy 105.41 44.45) (xy 105.41 45.72) + ) + (stroke + (width 0) + (type default) + ) + (uuid "64a24b07-8240-46c3-904a-a58b493a9ac6") + ) + (wire + (pts + (xy 55.88 60.96) (xy 35.56 60.96) + ) + (stroke + (width 0) + (type default) + ) + (uuid "6bb5680b-a890-49a9-a4be-9088106136b7") + ) + (wire + (pts + (xy 261.62 53.34) (xy 261.62 54.61) + ) + (stroke + (width 0) + (type default) + ) + (uuid "6ecf933a-4006-4cef-a646-a8bc4b3ee0e1") + ) + (wire + (pts + (xy 182.88 33.02) (xy 190.5 33.02) + ) + (stroke + (width 0) + (type default) + ) + (uuid "710d1197-a691-45c2-9b2f-d9677797cef6") + ) + (wire + (pts + (xy 194.31 81.28) (xy 204.47 81.28) + ) + (stroke + (width 0) + (type default) + ) + (uuid "7214982d-e78f-4016-8929-772d89d4255a") + ) + (wire + (pts + (xy 218.44 81.28) (xy 218.44 90.17) + ) + (stroke + (width 0) + (type default) + ) + (uuid "723939a1-81a1-432a-b494-0491488c41c2") + ) + (wire + (pts + (xy 245.11 134.62) (xy 130.81 134.62) + ) + (stroke + (width 0) + (type default) + ) + (uuid "73e6a103-d702-4daa-848a-3d8cb790ca5b") + ) + (wire + (pts + (xy 102.87 91.44) (xy 110.49 91.44) + ) + (stroke + (width 0) + (type default) + ) + (uuid "7aaab007-f079-408f-9a58-56b5e6c15e7f") + ) + (wire + (pts + (xy 219.71 46.99) (xy 219.71 48.26) + ) + (stroke + (width 0) + (type default) + ) + (uuid "7d202f4b-6ae7-41ba-bbf8-91ee9ae9bf11") + ) + (wire + (pts + (xy 181.61 59.69) (xy 161.29 59.69) + ) + (stroke + (width 0) + (type default) + ) + (uuid "7d4dde29-0582-4d4b-a3fd-c07337dae5e2") + ) + (wire + (pts + (xy 34.29 69.85) (xy 35.56 69.85) + ) + (stroke + (width 0) + (type default) + ) + (uuid "7ef9cbde-b95b-4698-8f49-da3409bc2f5f") + ) + (wire + (pts + (xy 182.88 33.02) (xy 182.88 34.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "7fced63a-ef46-42a2-bfa8-88d2d300a113") + ) + (wire + (pts + (xy 176.53 34.29) (xy 176.53 33.02) + ) + (stroke + (width 0) + (type default) + ) + (uuid "811fe4ae-4d9e-491d-b0e8-8933950cb5be") + ) + (wire + (pts + (xy 236.22 45.72) (xy 236.22 44.45) + ) + (stroke + (width 0) + (type default) + ) + (uuid "839939a7-f516-4162-9624-10f055b5a228") + ) + (wire + (pts + (xy 259.08 67.31) (xy 261.62 67.31) + ) + (stroke + (width 0) + (type default) + ) + (uuid "846985e7-c6f1-450f-8a62-94532b5372ec") + ) + (wire + (pts + (xy 236.22 44.45) (xy 246.38 44.45) + ) + (stroke + (width 0) + (type default) + ) + (uuid "86addab7-132f-451a-ab53-d65534d1607e") + ) + (wire + (pts + (xy 160.02 57.15) (xy 160.02 63.5) + ) + (stroke + (width 0) + (type default) + ) + (uuid "86dc9426-5d58-4a4d-9256-16c899f4d11c") + ) + (wire + (pts + (xy 64.77 48.26) (xy 69.85 48.26) + ) + (stroke + (width 0) + (type default) + ) + (uuid "86e24455-dfec-433f-80dc-c39fde419c1e") + ) + (wire + (pts + (xy 219.71 96.52) (xy 256.54 96.52) + ) + (stroke + (width 0) + (type default) + ) + (uuid "8856110e-3a32-4b3d-953a-25572067de24") + ) + (wire + (pts + (xy 128.27 54.61) (xy 128.27 55.88) + ) + (stroke + (width 0) + (type default) + ) + (uuid "8875669a-09fd-49e3-834b-fb79775a5152") + ) + (wire + (pts + (xy 41.91 34.29) (xy 41.91 35.56) + ) + (stroke + (width 0) + (type default) + ) + (uuid "889851f8-9f91-4273-973a-f59b39f0400a") + ) + (wire + (pts + (xy 190.5 33.02) (xy 190.5 35.56) + ) + (stroke + (width 0) + (type default) + ) + (uuid "889a9c33-d91a-4548-8507-f801bfafeeed") + ) + (wire + (pts + (xy 231.14 44.45) (xy 231.14 45.72) + ) + (stroke + (width 0) + (type default) + ) + (uuid "8f41df4a-75c5-46bc-a8c3-5d3f0148c4ec") + ) + (wire + (pts + (xy 124.46 102.87) (xy 128.27 102.87) + ) + (stroke + (width 0) + (type default) + ) + (uuid "8f6ab6b7-67bb-4706-bb66-3d55c8558431") + ) + (wire + (pts + (xy 64.77 57.15) (xy 64.77 58.42) + ) + (stroke + (width 0) + (type default) + ) + (uuid "91f76ed0-46c8-4ab3-9260-b06dd9da6255") + ) + (wire + (pts + (xy 254 53.34) (xy 254 54.61) + ) + (stroke + (width 0) + (type default) + ) + (uuid "94593297-cfb7-447c-80e6-d6a438491c21") + ) + (wire + (pts + (xy 105.41 45.72) (xy 110.49 45.72) + ) + (stroke + (width 0) + (type default) + ) + (uuid "9600660b-ecc2-4c8d-b81b-4cdb5cadd82b") + ) + (wire + (pts + (xy 157.48 66.04) (xy 158.75 66.04) + ) + (stroke + (width 0) + (type default) + ) + (uuid "96c16208-2dcf-4069-9c05-8b71bd10214b") + ) + (wire + (pts + (xy 120.65 46.99) (xy 120.65 45.72) + ) + (stroke + (width 0) + (type default) + ) + (uuid "99341930-798d-403c-9037-dd18c1735461") + ) + (wire + (pts + (xy 245.11 101.6) (xy 245.11 134.62) + ) + (stroke + (width 0) + (type default) + ) + (uuid "994cff41-56e3-4d1c-9d77-b04edd02df9c") + ) + (wire + (pts + (xy 259.08 66.04) (xy 251.46 66.04) + ) + (stroke + (width 0) + (type default) + ) + (uuid "9968e922-56e2-42b7-9cd5-b46c4327e31e") + ) + (wire + (pts + (xy 218.44 90.17) (xy 217.17 90.17) + ) + (stroke + (width 0) + (type default) + ) + (uuid "99e7c8cb-3f1b-44b4-a5de-c55f0a57bf41") + ) + (wire + (pts + (xy 102.87 67.31) (xy 105.41 67.31) + ) + (stroke + (width 0) + (type default) + ) + (uuid "9bdf28dd-1c79-4457-b9a9-d8360885126c") + ) + (wire + (pts + (xy 93.98 57.15) (xy 93.98 97.79) + ) + (stroke + (width 0) + (type default) + ) + (uuid "9c4154e7-0da3-4a59-b5bf-3ae7d91d1980") + ) + (wire + (pts + (xy 219.71 55.88) (xy 219.71 96.52) + ) + (stroke + (width 0) + (type default) + ) + (uuid "9c8407c3-7408-40f6-bb90-5ea1187f4c4f") + ) + (wire + (pts + (xy 128.27 102.87) (xy 128.27 104.14) + ) + (stroke + (width 0) + (type default) + ) + (uuid "9d98a4ab-bba2-4501-a178-3b67b9210367") + ) + (wire + (pts + (xy 50.8 34.29) (xy 45.72 34.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "9e760a6c-d6bf-4d81-9446-72f6d0889c5f") + ) + (wire + (pts + (xy 34.29 48.26) (xy 64.77 48.26) + ) + (stroke + (width 0) + (type default) + ) + (uuid "9ea442e9-907a-4d6f-815a-171f8f3da236") + ) + (wire + (pts + (xy 236.22 53.34) (xy 236.22 90.17) + ) + (stroke + (width 0) + (type default) + ) + (uuid "a26cbd66-b637-4bd4-bd16-ad289cd2e14a") + ) + (wire + (pts + (xy 69.85 88.9) (xy 71.12 88.9) + ) + (stroke + (width 0) + (type default) + ) + (uuid "a304f8bb-9908-43d6-b984-39aa9d3ee6a4") + ) + (wire + (pts + (xy 176.53 41.91) (xy 176.53 43.18) + ) + (stroke + (width 0) + (type default) + ) + (uuid "a47dd661-1608-40c6-9128-6ce417a2d5a8") + ) + (wire + (pts + (xy 135.89 46.99) (xy 135.89 45.72) + ) + (stroke + (width 0) + (type default) + ) + (uuid "a50010c8-4d90-430d-b26e-d41cba80c5f1") + ) + (wire + (pts + (xy 135.89 54.61) (xy 135.89 55.88) + ) + (stroke + (width 0) + (type default) + ) + (uuid "a5913897-6157-43d7-8158-819728b6aeb7") + ) + (wire + (pts + (xy 176.53 33.02) (xy 171.45 33.02) + ) + (stroke + (width 0) + (type default) + ) + (uuid "a72433ab-0bb4-44e8-828b-b404a8b0e39b") + ) + (wire + (pts + (xy 267.97 44.45) (xy 261.62 44.45) + ) + (stroke + (width 0) + (type default) + ) + (uuid "a75bfeb6-637c-4399-adcc-418096170287") + ) + (wire + (pts + (xy 190.5 55.88) (xy 190.5 57.15) + ) + (stroke + (width 0) + (type default) + ) + (uuid "a91be8bc-dcb5-4c37-815d-24c8afe2ef06") + ) + (wire + (pts + (xy 50.8 43.18) (xy 50.8 44.45) + ) + (stroke + (width 0) + (type default) + ) + (uuid "adea4fe8-030e-4a40-990b-130d838f0e1b") + ) + (wire + (pts + (xy 161.29 59.69) (xy 161.29 63.5) + ) + (stroke + (width 0) + (type default) + ) + (uuid "b37039f8-f51f-4638-9dd5-501faaa7e711") + ) + (wire + (pts + (xy 184.15 80.01) (xy 184.15 66.04) + ) + (stroke + (width 0) + (type default) + ) + (uuid "b4e05642-0d99-468b-9805-cc6901271eb3") + ) + (wire + (pts + (xy 231.14 53.34) (xy 231.14 66.04) + ) + (stroke + (width 0) + (type default) + ) + (uuid "b91024ae-8c24-4862-9f88-66259bfd1ec4") + ) + (wire + (pts + (xy 45.72 34.29) (xy 45.72 59.69) + ) + (stroke + (width 0) + (type default) + ) + (uuid "b9b1354a-f500-404d-8faa-99b174b6b775") + ) + (wire + (pts + (xy 92.71 91.44) (xy 91.44 91.44) + ) + (stroke + (width 0) + (type default) + ) + (uuid "bc758ff1-d4ec-472e-a239-d970b0236044") + ) + (wire + (pts + (xy 57.15 34.29) (xy 64.77 34.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "c037460b-d785-4168-9730-7c0b238c4294") + ) + (wire + (pts + (xy 49.53 78.74) (xy 60.96 78.74) + ) + (stroke + (width 0) + (type default) + ) + (uuid "c0654cb0-503a-4347-8895-4dea2a13575a") + ) + (wire + (pts + (xy 132.08 92.71) (xy 132.08 91.44) + ) + (stroke + (width 0) + (type default) + ) + (uuid "c0ff053d-a31a-4fbc-9421-b883cb3d23ea") + ) + (wire + (pts + (xy 105.41 34.29) (xy 64.77 34.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "c16969d1-a34b-4675-8a55-ada098db33e2") + ) + (wire + (pts + (xy 259.08 91.44) (xy 259.08 120.65) + ) + (stroke + (width 0) + (type default) + ) + (uuid "c1ff8341-84d9-405a-84a6-3b330bc15bb5") + ) + (wire + (pts + (xy 250.19 101.6) (xy 250.19 102.87) + ) + (stroke + (width 0) + (type default) + ) + (uuid "c2b51474-800f-4239-a324-8211c5098939") + ) + (wire + (pts + (xy 257.81 91.44) (xy 259.08 91.44) + ) + (stroke + (width 0) + (type default) + ) + (uuid "c39a99c3-a5ac-422e-84c4-4a79c5f7d54e") + ) + (wire + (pts + (xy 55.88 67.31) (xy 95.25 67.31) + ) + (stroke + (width 0) + (type default) + ) + (uuid "c96d1d4f-4c61-4289-97bd-5d8e1d840722") + ) + (wire + (pts + (xy 93.98 97.79) (xy 33.02 97.79) + ) + (stroke + (width 0) + (type default) + ) + (uuid "c9e1b4ce-66e4-4997-b653-40b4aa9cda9f") + ) + (wire + (pts + (xy 175.26 81.28) (xy 175.26 80.01) + ) + (stroke + (width 0) + (type default) + ) + (uuid "cc1b1048-e157-4f6e-b41c-1d824105d6ae") + ) + (wire + (pts + (xy 57.15 43.18) (xy 57.15 44.45) + ) + (stroke + (width 0) + (type default) + ) + (uuid "cddf18c7-aa13-49b8-86a4-8ca768e1f21d") + ) + (wire + (pts + (xy 261.62 67.31) (xy 261.62 120.65) + ) + (stroke + (width 0) + (type default) + ) + (uuid "ce39b7c5-1325-423d-85cf-10c84e601fcb") + ) + (wire + (pts + (xy 124.46 102.87) (xy 124.46 104.14) + ) + (stroke + (width 0) + (type default) + ) + (uuid "d3e22f79-5e96-4414-970c-2ee4f5c8be26") + ) + (wire + (pts + (xy 190.5 33.02) (xy 231.14 33.02) + ) + (stroke + (width 0) + (type default) + ) + (uuid "d56d1eac-d078-4188-89cd-4d8940b87b7d") + ) + (wire + (pts + (xy 130.81 102.87) (xy 130.81 97.79) + ) + (stroke + (width 0) + (type default) + ) + (uuid "d7666022-e4b6-4922-b779-dc8f9cf22fb2") + ) + (wire + (pts + (xy 135.89 45.72) (xy 128.27 45.72) + ) + (stroke + (width 0) + (type default) + ) + (uuid "d8336193-0c6a-450a-b17f-44ce6e543378") + ) + (wire + (pts + (xy 190.5 46.99) (xy 190.5 48.26) + ) + (stroke + (width 0) + (type default) + ) + (uuid "d99af2fa-2f1f-4e6a-aba2-df0cdf0bd9b1") + ) + (wire + (pts + (xy 34.29 64.77) (xy 34.29 69.85) + ) + (stroke + (width 0) + (type default) + ) + (uuid "da19adc9-ff18-40b1-a6da-a729a49bda12") + ) + (wire + (pts + (xy 57.15 82.55) (xy 68.58 82.55) + ) + (stroke + (width 0) + (type default) + ) + (uuid "db6bdf21-088d-45ed-b247-b1e84568f4f9") + ) + (wire + (pts + (xy 105.41 45.72) (xy 105.41 46.99) + ) + (stroke + (width 0) + (type default) + ) + (uuid "dce9db85-1114-4c42-ada6-c3ab2cd8d9a9") + ) + (wire + (pts + (xy 257.81 91.44) (xy 257.81 90.17) + ) + (stroke + (width 0) + (type default) + ) + (uuid "dd2db1c4-c33f-47da-843d-a86081428bb0") + ) + (wire + (pts + (xy 228.6 90.17) (xy 236.22 90.17) + ) + (stroke + (width 0) + (type default) + ) + (uuid "dd68282a-67ee-483e-a535-e430213df65a") + ) + (wire + (pts + (xy 157.48 63.5) (xy 160.02 63.5) + ) + (stroke + (width 0) + (type default) + ) + (uuid "df7e9f1b-cb67-4bea-9494-6b42c1315cda") + ) + (wire + (pts + (xy 50.8 34.29) (xy 57.15 34.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "e4afcd15-3492-4e27-950c-6716d62227f2") + ) + (wire + (pts + (xy 68.58 82.55) (xy 78.74 82.55) + ) + (stroke + (width 0) + (type default) + ) + (uuid "e4ea914c-95b7-40e4-87b6-c3c86e72091f") + ) + (wire + (pts + (xy 133.35 68.58) (xy 133.35 67.31) + ) + (stroke + (width 0) + (type default) + ) + (uuid "e757f2a8-a230-49a3-bc8a-be01199c7127") + ) + (wire + (pts + (xy 128.27 102.87) (xy 130.81 102.87) + ) + (stroke + (width 0) + (type default) + ) + (uuid "e7975401-490b-485e-9359-65cbafdc65ae") + ) + (wire + (pts + (xy 33.02 97.79) (xy 33.02 67.31) + ) + (stroke + (width 0) + (type default) + ) + (uuid "e9dac3d9-65f9-4c73-9cbe-cd42b1852224") + ) + (wire + (pts + (xy 231.14 44.45) (xy 236.22 44.45) + ) + (stroke + (width 0) + (type default) + ) + (uuid "ef652169-5654-4f01-919b-c5b357de0f98") + ) + (wire + (pts + (xy 34.29 58.42) (xy 34.29 64.77) + ) + (stroke + (width 0) + (type default) + ) + (uuid "efc8e1ee-cc00-44c1-8da9-5afc10dad8f6") + ) + (wire + (pts + (xy 57.15 35.56) (xy 57.15 34.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "efd1fca6-cdf9-4187-b093-e19b7395363f") + ) + (wire + (pts + (xy 50.8 35.56) (xy 50.8 34.29) + ) + (stroke + (width 0) + (type default) + ) + (uuid "f1dcdd08-7048-4841-a090-82e23b525d67") + ) + (wire + (pts + (xy 49.53 82.55) (xy 49.53 78.74) + ) + (stroke + (width 0) + (type default) + ) + (uuid "f203d91b-1d93-47c8-9b81-9c07f7c24b39") + ) + (wire + (pts + (xy 259.08 67.31) (xy 259.08 66.04) + ) + (stroke + (width 0) + (type default) + ) + (uuid "f30828a0-deda-4512-a88b-15589aa85550") + ) + (wire + (pts + (xy 69.85 48.26) (xy 93.98 48.26) + ) + (stroke + (width 0) + (type default) + ) + (uuid "fa79d681-e624-472b-90ca-4bceabd22b58") + ) + (wire + (pts + (xy 219.71 96.52) (xy 158.75 96.52) + ) + (stroke + (width 0) + (type default) + ) + (uuid "fb380bd7-1916-4ca4-a598-0bdcac2dfaac") + ) + (wire + (pts + (xy 246.38 45.72) (xy 246.38 44.45) + ) + (stroke + (width 0) + (type default) + ) + (uuid "fdfa8463-af02-44fd-b403-438076cb6fc4") + ) + (symbol + (lib_id "Device:C") + (at 128.27 50.8 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "0074ef94-0d36-4108-8f14-b1d064783f91") + (property "Reference" "C8" + (at 128.27 48.26 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "0.1uF" + (at 128.27 53.34 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (at 129.2352 54.61 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 128.27 50.8 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 128.27 50.8 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "2" + (uuid "40a700ce-d8c6-499d-85bd-ca5185849750") + ) + (pin "1" + (uuid "7435bd30-37e9-41a7-9e23-93385145da9e") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "C8") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector:Conn_01x01_Pin") + (at 261.62 125.73 90) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "02603ffc-8ef0-4551-98e5-69f3d0b5f5ed") + (property "Reference" "X2A1" + (at 261.62 125.73 0) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + ) + ) + (property "Value" "Conn_01x01_Pin" + (at 262.89 126.365 90) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + (hide yes) + ) + ) + (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" + (at 261.62 125.73 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 261.62 125.73 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 261.62 125.73 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "b0e8089c-1407-4dd7-81ad-5836b1a948f4") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "X2A1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C_Polarized") + (at 50.8 39.37 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "028b1213-6965-4c6b-88c6-99867053371d") + (property "Reference" "C14" + (at 50.8 36.83 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "47uF 35v" + (at 45.72 41.91 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "C47u35v:CAPPRD200W50D525H1250" + (at 51.7652 43.18 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 50.8 39.37 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 50.8 39.37 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "2" + (uuid "ecc9dcf8-ef72-45a3-a036-f97d5c03b47a") + ) + (pin "1" + (uuid "adfcc31b-373b-4348-88bb-59bab5bfd258") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "C14") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:D") + (at 261.62 49.53 270) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "04786958-d145-4302-af4f-030967ac2a8a") + (property "Reference" "D1" + (at 261.62 46.99 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "12V" + (at 261.62 52.07 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (at 261.62 49.53 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 261.62 49.53 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 261.62 49.53 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Sim.Device" "D" + (at 261.62 49.53 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Sim.Pins" "1=K 2=A" + (at 261.62 49.53 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "fc238e8a-f415-426b-bfb8-a60940691ec0") + ) + (pin "2" + (uuid "051bbe09-8bdc-4779-bfa2-a3908276e774") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "D1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "power:GND") + (at 124.46 104.14 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (fields_autoplaced yes) + (uuid "0638dd7e-db00-45d0-ab7e-e480ad52bc71") + (property "Reference" "#PWR0106" + (at 124.46 110.49 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Value" "GND" + (at 124.46 109.22 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 124.46 104.14 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "" + (at 124.46 104.14 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 124.46 104.14 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "1cb34798-dd6e-4100-9bc6-8d54414adf08") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "#PWR0106") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "power:GND") + (at 171.45 74.93 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "0ce31e06-d5bf-4265-8302-b0df1a209197") + (property "Reference" "#PWR0109" + (at 171.45 81.28 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Value" "GND" + (at 171.45 80.01 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 171.45 74.93 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "" + (at 171.45 74.93 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 171.45 74.93 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "1a78a636-f0a9-45b0-8a4e-9f2c470d570c") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "#PWR0109") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "power:GND") + (at 135.89 55.88 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (fields_autoplaced yes) + (uuid "12f01892-6ea7-495e-854d-744cf9b544bc") + (property "Reference" "#PWR0108" + (at 135.89 62.23 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Value" "GND" + (at 135.89 60.96 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 135.89 55.88 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "" + (at 135.89 55.88 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 135.89 55.88 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "942cf78d-d279-40d4-80ca-d3ba61fd8251") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "#PWR0108") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C_Polarized") + (at 224.79 66.04 270) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "225d2ae8-3230-4005-a4b4-2094ff960f52") + (property "Reference" "C4" + (at 227.33 63.5 90) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "47uF 63v" + (at 231.14 67.31 90) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "C47u63v:CAPPRD350W65D800H1250" + (at 220.98 67.0052 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 224.79 66.04 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 224.79 66.04 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "2" + (uuid "301a08fd-b6be-45bd-a4b3-131c4d4ae900") + ) + (pin "1" + (uuid "330ccdc2-e319-47b7-b9da-f6a3ec507838") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "C4") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 105.41 50.8 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "22c624a2-9c69-4937-8b4e-0e03aaaaa038") + (property "Reference" "R14" + (at 105.41 46.99 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "2.2K" + (at 105.41 54.61 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (at 103.632 50.8 90) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 105.41 50.8 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 105.41 50.8 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "2" + (uuid "a1358048-f4a8-46fd-b384-828214ca563a") + ) + (pin "1" + (uuid "fce8e472-b813-4a8e-9411-5e0e03bbe999") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "R14") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C_Polarized") + (at 93.98 53.34 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "26f9efc1-f18f-46a4-a4e0-fd7b825b179e") + (property "Reference" "C12" + (at 93.98 50.8 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "47uF 35v" + (at 88.9 55.88 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "C47u35v:CAPPRD200W50D525H1250" + (at 94.9452 57.15 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 93.98 53.34 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 93.98 53.34 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "2" + (uuid "4978d725-9316-4043-8a1f-b1c9ce984c4e") + ) + (pin "1" + (uuid "88b3b53e-f532-4bb8-82a4-d6d592645dc1") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "C12") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "power:GND") + (at 190.5 57.15 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (fields_autoplaced yes) + (uuid "27f8adc3-3950-478b-b798-a085134eab29") + (property "Reference" "#PWR0112" + (at 190.5 63.5 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Value" "GND" + (at 190.5 62.23 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 190.5 57.15 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "" + (at 190.5 57.15 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 190.5 57.15 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "15910eea-dab8-4e08-897a-116a0d158e23") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "#PWR0112") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 179.07 81.28 90) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "333c6bef-4cf7-4319-b480-a4d554049f1a") + (property "Reference" "R9" + (at 175.26 82.55 90) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "2.2K" + (at 184.15 82.55 90) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (at 179.07 83.058 90) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 179.07 81.28 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 179.07 81.28 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "2" + (uuid "70759d1c-be29-4c5c-8809-98315f1c5ab1") + ) + (pin "1" + (uuid "e877352c-a598-4129-b31b-d17acebc6954") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "R9") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C_Polarized") + (at 99.06 67.31 270) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "388d7ed8-52d9-442b-b762-60006c60c529") + (property "Reference" "C11" + (at 101.6 64.77 90) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "47uF 63v" + (at 105.41 68.58 90) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "C47u63v:CAPPRD350W65D800H1250" + (at 95.25 68.2752 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 99.06 67.31 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 99.06 67.31 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "2" + (uuid "51a481e5-83de-40ff-89b7-dfc4eae21bc2") + ) + (pin "1" + (uuid "89572e0b-9d69-46f6-8e01-4ad6452bc3f7") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "C11") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector_Generic:Conn_01x01") + (at 26.67 85.09 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (fields_autoplaced yes) + (uuid "38fe0de6-7d2f-4f1f-80d5-5bc0704f2c9a") + (property "Reference" "J1" + (at 29.21 83.82 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "Conn_01x01" + (at 29.21 86.36 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "" + (at 26.67 85.09 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 26.67 85.09 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 26.67 85.09 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "67cc4a14-d1b6-4462-bcdc-06d9ed4be212") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "J1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 121.92 91.44 90) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "4281c715-bfa5-4c1d-833f-007ae19a4629") + (property "Reference" "R11" + (at 118.11 92.71 90) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "47" + (at 125.73 92.71 90) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (at 121.92 93.218 90) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 121.92 91.44 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 121.92 91.44 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "2" + (uuid "6faefed0-61f7-4fd8-8ccb-07f56d270344") + ) + (pin "1" + (uuid "4db49fe1-988c-4207-bdeb-2ca6e8d955f4") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "R11") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 247.65 90.17 90) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "465be87b-5590-4da0-9122-4e5009c124ff") + (property "Reference" "R1" + (at 243.84 91.44 90) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "47" + (at 251.46 91.44 90) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (at 247.65 91.948 90) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 247.65 90.17 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 247.65 90.17 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "2" + (uuid "518371d7-430d-4ece-85c1-e014c34e5f91") + ) + (pin "1" + (uuid "8e32f884-af0c-4f58-b1d4-dee7df354570") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "R1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "OPA1642AID:OPA1642AID") + (at 45.72 67.31 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "46bd3898-2842-4255-93e2-77804f67ee14") + (property "Reference" "IC2" + (at 49.53 64.77 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "OPA1642AID" + (at 53.34 69.85 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "opa1642:SOIC127P600X175-8N" + (at 45.72 67.31 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "Datasheet" "" + (at 45.72 67.31 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "\n \n Dual SoundPlus™ high-performance, JFET-input audio op amp\n \n" + (at 45.72 67.31 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "MF" "Texas Instruments" + (at 45.72 67.31 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "MAXIMUM_PACKAGE_HEIGHT" "1.75 mm" + (at 45.72 67.31 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "Package" "SOIC-8 Texas Instruments" + (at 45.72 67.31 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "Price" "None" + (at 45.72 67.31 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "Check_prices" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=eda" + (at 45.72 67.31 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "STANDARD" "IPC 7351B" + (at 45.72 67.31 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "PARTREV" "D" + (at 45.72 67.31 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "SnapEDA_Link" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=snap" + (at 45.72 67.31 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "MP" "OPA1642AID" + (at 45.72 67.31 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "Availability" "In Stock" + (at 45.72 67.31 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "MANUFACTURER" "Texas Instruments" + (at 45.72 67.31 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (pin "1" + (uuid "f6adf7a0-f4f6-489d-aa22-16fd1d80ab13") + ) + (pin "7" + (uuid "c8f04e9e-37cd-44d0-befd-fa1c054349ed") + ) + (pin "4" + (uuid "d54d4c06-fe4e-4323-b930-98b2c1a2dba1") + ) + (pin "2" + (uuid "76767c82-1b5b-439e-a798-ee79a4f46bba") + ) + (pin "6" + (uuid "c36582c0-b02a-453d-9f70-9abbd6fba049") + ) + (pin "8" + (uuid "8849be4b-fb86-4bc5-a0c6-953ccb2e220e") + ) + (pin "3" + (uuid "29daf701-3def-4826-95b5-e97a339f144a") + ) + (pin "5" + (uuid "1c1b288a-a713-40eb-8869-436701df4af6") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "IC2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 110.49 50.8 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "486efbe6-6d60-4f65-a28a-eac2f703a21a") + (property "Reference" "R13" + (at 110.49 46.99 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "2.2K" + (at 110.49 54.61 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (at 108.712 50.8 90) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 110.49 50.8 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 110.49 50.8 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "2" + (uuid "bc0f2659-41ff-4316-90ad-7a947ab2a415") + ) + (pin "1" + (uuid "feaeb753-707d-4138-a168-f4b32dfbad00") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "R13") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C_Polarized") + (at 246.38 49.53 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "4af43834-c924-4e65-939c-9334e1de4766") + (property "Reference" "C2" + (at 246.38 46.99 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "47uF 35v" + (at 241.3 52.07 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "C47u35v:CAPPRD200W50D525H1250" + (at 247.3452 53.34 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 246.38 49.53 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 246.38 49.53 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "2" + (uuid "647869d4-07f5-4c7f-abe2-670267baac61") + ) + (pin "1" + (uuid "65bae4a4-9996-4268-bc65-e781d99f3f37") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "C2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C_Polarized") + (at 219.71 52.07 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "4b15cc8f-884d-43ed-8a34-09c6b829c7ae") + (property "Reference" "C5" + (at 219.71 49.53 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "47uF 35v" + (at 214.63 54.61 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "C47u35v:CAPPRD200W50D525H1250" + (at 220.6752 55.88 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 219.71 52.07 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 219.71 52.07 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "2" + (uuid "525fdf3a-5064-41df-a1da-296395c40b65") + ) + (pin "1" + (uuid "7f9c78b5-f669-4314-abbc-4dd36132e90c") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "C5") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 82.55 82.55 90) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "4dfa4bfd-4e46-43b4-9020-c77e950185e1") + (property "Reference" "R16" + (at 82.55 80.01 90) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "2.2K" + (at 82.55 85.09 90) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (at 82.55 84.328 90) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 82.55 82.55 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 82.55 82.55 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "2" + (uuid "7d35210b-3864-4e01-beca-84275481542d") + ) + (pin "1" + (uuid "b795f1c6-d889-4b77-937f-8d4fed456b68") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "R16") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 182.88 38.1 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "57c290cf-4a3a-4689-a5cc-79dd666271df") + (property "Reference" "C6" + (at 182.88 35.56 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "0.1uF" + (at 182.88 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "C.022uF50v:K223K15X7RF5UL2" + (at 183.8452 41.91 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 182.88 38.1 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 182.88 38.1 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "2" + (uuid "ace7e3a0-e0a8-4d53-aed7-f73bbc2ba9ac") + ) + (pin "1" + (uuid "7875c3ce-ca93-43d1-a530-cfb1c2e4f9b4") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "C6") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector:Conn_01x01_Pin") + (at 25.4 64.77 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "5927db5e-0de5-4020-a1e2-d3c795f23f3a") + (property "Reference" "SGNL_B1" + (at 25.4 64.77 0) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + ) + ) + (property "Value" "Conn_01x01_Pin" + (at 24.765 66.04 90) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + (hide yes) + ) + ) + (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" + (at 25.4 64.77 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 25.4 64.77 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 25.4 64.77 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "1f5986a4-36e7-4342-892f-caed098ad8ac") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "SGNL_B1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:D") + (at 135.89 50.8 270) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "60bb60f7-d540-494b-9a5e-5a737fa70d44") + (property "Reference" "D2" + (at 135.89 48.26 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "12V" + (at 135.89 53.34 90) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (at 135.89 50.8 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 135.89 50.8 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 135.89 50.8 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Sim.Device" "D" + (at 135.89 50.8 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Sim.Pins" "1=K 2=A" + (at 135.89 50.8 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (pin "1" + (uuid "48fffc35-69ad-407d-8ac5-a48aaef81aaa") + ) + (pin "2" + (uuid "6d04fede-95df-4e99-9581-c968c34a51b8") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "D2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 34.29 54.61 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "621df7af-eee1-4ba7-b334-c8f75f6a97e7") + (property "Reference" "R20" + (at 34.29 50.8 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "1G" + (at 34.29 58.42 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "R1Go:RESAD1650W70L650D250" + (at 32.512 54.61 90) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 34.29 54.61 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 34.29 54.61 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "2" + (uuid "37367294-eb12-4385-8a7d-d76663413377") + ) + (pin "1" + (uuid "adbf79fc-38fb-453c-9ec4-dcfac1a233ec") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "R20") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "power:GND") + (at 64.77 58.42 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (fields_autoplaced yes) + (uuid "63c7cdab-6e11-4929-be9e-27ccae01fe37") + (property "Reference" "#PWR0104" + (at 64.77 64.77 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Value" "GND" + (at 64.77 63.5 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 64.77 58.42 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "" + (at 64.77 58.42 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 64.77 58.42 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "c98fc743-875d-40d3-93ae-0d4889cfef40") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "#PWR0104") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector:Conn_01x01_Pin") + (at 128.27 109.22 90) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "64e688e4-4221-4813-bb3e-a93bb87dbbc0") + (property "Reference" "GND_T2" + (at 128.27 109.22 0) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + ) + ) + (property "Value" "Conn_01x01_Pin" + (at 129.54 109.855 90) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + (hide yes) + ) + ) + (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" + (at 128.27 109.22 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 128.27 109.22 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 128.27 109.22 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "92d01587-a830-495c-834d-8598d13fa0bc") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "GND_T2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector:Conn_01x01_Pin") + (at 142.24 52.07 90) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "6778b725-cc7e-4fa7-8d8b-1f47e2db759c") + (property "Reference" "VCC_B1" + (at 142.24 52.07 0) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + ) + ) + (property "Value" "Conn_01x01_Pin" + (at 143.51 52.705 90) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + (hide yes) + ) + ) + (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" + (at 142.24 52.07 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 142.24 52.07 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 142.24 52.07 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "743b3ee1-c27b-44f5-9b84-fc078bb4ae34") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "VCC_B1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 53.34 82.55 90) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "6a141024-0740-4682-ac78-fa29ac380bd3") + (property "Reference" "R19" + (at 49.53 83.82 90) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "2.2K" + (at 58.42 83.82 90) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (at 53.34 84.328 90) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 53.34 82.55 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 53.34 82.55 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "2" + (uuid "57ab3927-126d-4bcb-b960-d87e99dac8f6") + ) + (pin "1" + (uuid "8b59cb1e-3efe-4123-946e-88111aaeec9a") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "R19") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 190.5 39.37 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "6bc81894-9db7-4be7-a876-2de954b2e8d4") + (property "Reference" "R8" + (at 190.5 35.56 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "47K" + (at 190.5 43.18 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (at 188.722 39.37 90) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 190.5 39.37 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 190.5 39.37 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "2" + (uuid "f6fd3a46-9bd3-4b6f-90c5-12f4fdc83af9") + ) + (pin "1" + (uuid "f7e0c90e-3c47-4d51-98ea-1a1c1bcebdf5") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "R8") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector:Conn_01x01_Pin") + (at 41.91 40.64 90) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "6e74e034-da91-4106-b8de-7f1079a017da") + (property "Reference" "VCC_B2" + (at 41.91 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + ) + ) + (property "Value" "Conn_01x01_Pin" + (at 43.18 41.275 90) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + (hide yes) + ) + ) + (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" + (at 41.91 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 41.91 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 41.91 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "8a6f6c2d-76de-4ed7-9b45-ed1e73bbcf25") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "VCC_B2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector:Conn_01x01_Pin") + (at 267.97 50.8 90) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "7056a7e2-eebb-4df3-8f54-dadb45bfed44") + (property "Reference" "VCC_A1" + (at 267.97 50.8 0) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + ) + ) + (property "Value" "Conn_01x01_Pin" + (at 269.24 51.435 90) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + (hide yes) + ) + ) + (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" + (at 267.97 50.8 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 267.97 50.8 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 267.97 50.8 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "fe39015c-d0fe-44f1-a61c-5dd362f67ab6") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "VCC_A1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 231.14 39.37 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "7f13f25b-68e1-44e1-992e-6e69c71b1400") + (property "Reference" "R5" + (at 231.14 35.56 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "330" + (at 231.14 43.18 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (at 229.362 39.37 90) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 231.14 39.37 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 231.14 39.37 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "2" + (uuid "723218d0-30ba-4d7d-b4ad-dcaf19ce4da5") + ) + (pin "1" + (uuid "0c84d6f8-f220-44e8-a38e-cbe00dda0ac3") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "R5") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "power:GND") + (at 50.8 44.45 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "8247279b-6189-44c1-a55a-78f114f233c6") + (property "Reference" "#PWR?" + (at 50.8 41.91 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "GND" + (at 50.8 46.99 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 50.8 44.45 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 50.8 44.45 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 50.8 44.45 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "87b4858d-1f90-4402-873b-2d25b9bb61f7") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "#PWR?") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 231.14 49.53 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "831a82f3-bee1-4a20-9f0c-de8891a80b24") + (property "Reference" "R4" + (at 231.14 45.72 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "2.2K" + (at 231.14 53.34 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (at 229.362 49.53 90) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 231.14 49.53 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 231.14 49.53 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "2" + (uuid "24ce802d-7dfa-4097-a649-d24b888ef91b") + ) + (pin "1" + (uuid "4ed7e121-3441-41dc-bdf1-ce3e7760743d") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "R4") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 254 49.53 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "85f8809e-e152-4de2-87ff-91f95cdc3dd3") + (property "Reference" "C1" + (at 254 46.99 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "0.1uF" + (at 254 52.07 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (at 254.9652 53.34 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 254 49.53 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 254 49.53 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "2" + (uuid "b7ea7844-17c6-4c08-bf47-43522e085528") + ) + (pin "1" + (uuid "07c5af00-f156-4fd3-8ba9-83534d940a6d") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "C1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector:Conn_01x01_Pin") + (at 152.4 63.5 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "8a06125c-2a98-42e5-987b-f3b86e05fdf0") + (property "Reference" "SGNL_A1" + (at 152.4 63.5 0) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + ) + ) + (property "Value" "Conn_01x01_Pin" + (at 151.765 64.77 90) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + (hide yes) + ) + ) + (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" + (at 152.4 63.5 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 152.4 63.5 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 152.4 63.5 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "dc757226-c32d-437b-8181-dc9c7ef42847") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "SGNL_A1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 64.77 53.34 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "8a64f8ab-cec7-4969-9401-c34ade5f0cb5") + (property "Reference" "R17" + (at 64.77 49.53 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "47K" + (at 64.77 57.15 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (at 62.992 53.34 90) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 64.77 53.34 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 64.77 53.34 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "2" + (uuid "56b00a3a-50d5-44ba-8e34-e5b658887ba0") + ) + (pin "1" + (uuid "84750aa7-df07-4ba8-a9a5-3927fa32b3c2") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "R17") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "OPA1642AID:OPA1642AID") + (at 171.45 66.04 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "8d506b1e-5a87-423a-8d59-2dff832fadc9") + (property "Reference" "IC1" + (at 175.26 63.5 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "OPA1642AID" + (at 179.07 68.58 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "opa1642:SOIC127P600X175-8N" + (at 171.45 66.04 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "Datasheet" "" + (at 171.45 66.04 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "\n \n Dual SoundPlus™ high-performance, JFET-input audio op amp\n \n" + (at 171.45 66.04 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "MF" "Texas Instruments" + (at 171.45 66.04 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "MAXIMUM_PACKAGE_HEIGHT" "1.75 mm" + (at 171.45 66.04 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "Package" "SOIC-8 Texas Instruments" + (at 171.45 66.04 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "Price" "None" + (at 171.45 66.04 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "Check_prices" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=eda" + (at 171.45 66.04 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "STANDARD" "IPC 7351B" + (at 171.45 66.04 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "PARTREV" "D" + (at 171.45 66.04 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "SnapEDA_Link" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=snap" + (at 171.45 66.04 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "MP" "OPA1642AID" + (at 171.45 66.04 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "Availability" "In Stock" + (at 171.45 66.04 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "MANUFACTURER" "Texas Instruments" + (at 171.45 66.04 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (pin "1" + (uuid "3df379a1-e2db-4012-b7f4-e03ddff491f4") + ) + (pin "7" + (uuid "c8f04e9e-37cd-44d0-befd-fa1c054349ee") + ) + (pin "4" + (uuid "651337f9-8ba0-4fb4-a19a-5b2153e21a46") + ) + (pin "2" + (uuid "ffee3cea-43a3-4548-959e-f592c529c82d") + ) + (pin "6" + (uuid "c36582c0-b02a-453d-9f70-9abbd6fba04a") + ) + (pin "8" + (uuid "6e9185ff-d89f-45cd-881a-ae7bd73c8482") + ) + (pin "3" + (uuid "2b4ed616-8377-450b-a166-514a2dceb365") + ) + (pin "5" + (uuid "1c1b288a-a713-40eb-8869-436701df4af7") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "IC1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 190.5 52.07 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "9073f975-3395-426e-a26b-e4f39deda04a") + (property "Reference" "R7" + (at 190.5 48.26 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "47K" + (at 190.5 55.88 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (at 188.722 52.07 90) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 190.5 52.07 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 190.5 52.07 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "2" + (uuid "f0c9e713-d820-482b-9034-493d59e5d602") + ) + (pin "1" + (uuid "b724afc6-2e72-4c95-8481-b7e672131d32") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "R7") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C_Polarized") + (at 99.06 91.44 270) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "90b176ff-c759-4172-98d6-a482a71dc515") + (property "Reference" "C10" + (at 101.6 88.9 90) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "47uF 63v" + (at 105.41 92.71 90) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "C47u63v:CAPPRD350W65D800H1250" + (at 95.25 92.4052 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 99.06 91.44 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 99.06 91.44 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "2" + (uuid "f1b69faa-bead-4c39-bc09-4ced25f2253d") + ) + (pin "1" + (uuid "65dc8b05-7f72-46e6-a78b-a3bc00e18890") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "C10") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "power:GND") + (at 261.62 54.61 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (fields_autoplaced yes) + (uuid "94e815d1-ccba-4300-acdb-411e86c0272d") + (property "Reference" "#PWR0116" + (at 261.62 60.96 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Value" "GND" + (at 261.62 59.69 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 261.62 54.61 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "" + (at 261.62 54.61 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 261.62 54.61 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "60bc8531-cbca-4d52-a219-177c287740b9") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "#PWR0116") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector:Conn_01x01_Pin") + (at 25.4 67.31 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "989fc3e9-94aa-4ae0-8fd0-530b54bc7c6a") + (property "Reference" "GND_B1" + (at 25.4 67.31 0) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + ) + ) + (property "Value" "Conn_01x01_Pin" + (at 24.765 68.58 90) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + (hide yes) + ) + ) + (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" + (at 25.4 67.31 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 25.4 67.31 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 25.4 67.31 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "ebb67577-81cb-402a-a479-e6b69b6a2a4c") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "GND_B1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 121.92 67.31 90) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "9a83ce8c-c4ea-4707-8978-a44f631e4fc0") + (property "Reference" "R12" + (at 118.11 68.58 90) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "47" + (at 125.73 68.58 90) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (at 121.92 69.088 90) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 121.92 67.31 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 121.92 67.31 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "2" + (uuid "29c69a30-72c3-4c8e-853b-16a0d81d7ab7") + ) + (pin "1" + (uuid "03ca679f-145d-4409-b8c3-fb649159ea82") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "R12") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector:Conn_01x01_Pin") + (at 135.89 127 90) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "9e00ee5d-3600-4941-9f50-ffa5b59f36da") + (property "Reference" "X2B1" + (at 135.89 127 0) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + ) + ) + (property "Value" "Conn_01x01_Pin" + (at 137.16 127.635 90) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + (hide yes) + ) + ) + (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" + (at 135.89 127 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 135.89 127 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 135.89 127 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "f6197fba-036d-47cd-8ff2-bcb89febeb1e") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "X2B1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "power:GND") + (at 246.38 54.61 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (fields_autoplaced yes) + (uuid "9ef2a4b2-dd03-4616-8256-be478fd95499") + (property "Reference" "#PWR0113" + (at 246.38 60.96 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Value" "GND" + (at 246.38 59.69 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 246.38 54.61 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "" + (at 246.38 54.61 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 246.38 54.61 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "9ddd2182-efff-4095-8aea-063efb3c9f4c") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "#PWR0113") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 208.28 81.28 90) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "a10f13f8-a81d-4f2b-b313-a7028981413d") + (property "Reference" "R6" + (at 204.47 82.55 90) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "2.2K" + (at 213.36 82.55 90) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (at 208.28 83.058 90) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 208.28 81.28 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 208.28 81.28 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "2" + (uuid "e56fb348-0eed-4724-8374-d5ed289135fc") + ) + (pin "1" + (uuid "2dc2e58e-bc13-43b6-aacc-05e583e6b221") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "R6") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 160.02 53.34 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "a3724ff5-8cb6-46d0-b421-63da8a253dc7") + (property "Reference" "R10" + (at 160.02 49.53 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "1G" + (at 160.02 57.15 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "R1Go:RESAD1650W70L650D250" + (at 158.242 53.34 90) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 160.02 53.34 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 160.02 53.34 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "2" + (uuid "6cf9d0d0-dcc0-4e99-8d52-6d40b2b7c1ac") + ) + (pin "1" + (uuid "d97e47c4-78d6-4cb3-aec2-ef357ac9254f") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "R10") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "OPA1642AID:OPA1642AID") + (at 207.01 90.17 0) + (mirror x) + (unit 2) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "adb405c9-094f-4a77-a219-d4048679141c") + (property "Reference" "IC1" + (at 208.28 86.36 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "OPA1642AID" + (at 212.09 93.98 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "opa1642:SOIC127P600X175-8N" + (at 207.01 90.17 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "Datasheet" "" + (at 207.01 90.17 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "\n \n Dual SoundPlus™ high-performance, JFET-input audio op amp\n \n" + (at 207.01 90.17 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "MF" "Texas Instruments" + (at 207.01 90.17 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "MAXIMUM_PACKAGE_HEIGHT" "1.75 mm" + (at 207.01 90.17 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "Package" "SOIC-8 Texas Instruments" + (at 207.01 90.17 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "Price" "None" + (at 207.01 90.17 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "Check_prices" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=eda" + (at 207.01 90.17 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "STANDARD" "IPC 7351B" + (at 207.01 90.17 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "PARTREV" "D" + (at 207.01 90.17 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "SnapEDA_Link" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=snap" + (at 207.01 90.17 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "MP" "OPA1642AID" + (at 207.01 90.17 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "Availability" "In Stock" + (at 207.01 90.17 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "MANUFACTURER" "Texas Instruments" + (at 207.01 90.17 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (pin "1" + (uuid "8eb7a723-ff49-4e64-bcff-d54dedebf6de") + ) + (pin "7" + (uuid "05d5304f-1ed3-4e59-a514-76c851c09ee5") + ) + (pin "4" + (uuid "5ea9edc8-d7e5-498d-a5e1-f4d8f0e59841") + ) + (pin "2" + (uuid "223a6f4e-dc79-479d-8844-0b96b300e0c6") + ) + (pin "6" + (uuid "476b9f2a-7339-4832-a12b-b9f0e4788b29") + ) + (pin "8" + (uuid "30ff56b3-f2da-4beb-89d7-da61228bd144") + ) + (pin "3" + (uuid "bf170eff-2b68-464c-8e53-81064b7f76b1") + ) + (pin "5" + (uuid "5a08e4c8-6a5e-47fb-957b-3a799787a7e7") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "IC1") + (unit 2) + ) + ) + ) + ) + (symbol + (lib_id "power:GND") + (at 120.65 55.88 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (fields_autoplaced yes) + (uuid "b298509f-d04e-48de-bbad-f0bcbab3a04f") + (property "Reference" "#PWR0105" + (at 120.65 62.23 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Value" "GND" + (at 120.65 60.96 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 120.65 55.88 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "" + (at 120.65 55.88 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 120.65 55.88 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "e2867602-0acc-44af-823e-6d73343203c4") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "#PWR0105") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C") + (at 57.15 39.37 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "b34f1ed3-ca84-4b39-accd-7cbb7c08ede6") + (property "Reference" "C13" + (at 57.15 36.83 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "0.1uF" + (at 57.15 41.91 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (at 58.1152 43.18 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 57.15 39.37 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 57.15 39.37 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "2" + (uuid "08381df4-f68a-4b02-838a-e33bc5db6181") + ) + (pin "1" + (uuid "f9c91b11-1320-43ce-a281-800009a799b3") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "C13") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C_Polarized") + (at 224.79 90.17 270) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "b794b8cc-7dca-48f0-a5b9-9fe56f5cb9c1") + (property "Reference" "C3" + (at 227.33 87.63 90) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "47uF 63v" + (at 231.14 91.44 90) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "C47u63v:CAPPRD350W65D800H1250" + (at 220.98 91.1352 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 224.79 90.17 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 224.79 90.17 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "2" + (uuid "660c13ef-ecb7-4c3d-86fd-115e4d9a0c71") + ) + (pin "1" + (uuid "c590c216-8b22-4232-85fc-4f587bd02276") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "C3") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "power:GND") + (at 254 54.61 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (fields_autoplaced yes) + (uuid "b83e3479-76fc-41a1-9e65-7d4d4f852f71") + (property "Reference" "#PWR0115" + (at 254 60.96 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Value" "GND" + (at 254 59.69 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 254 54.61 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "" + (at 254 54.61 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 254 54.61 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "65176011-8e4a-466d-b5eb-0012c0aa8023") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "#PWR0115") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "power:GND") + (at 128.27 55.88 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (fields_autoplaced yes) + (uuid "ba927458-14a9-4bb5-988c-8c8ee4e370d6") + (property "Reference" "#PWR0107" + (at 128.27 62.23 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Value" "GND" + (at 128.27 60.96 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 128.27 55.88 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "" + (at 128.27 55.88 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 128.27 55.88 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "b64aa85b-c13f-4d17-8d41-c3be2cbb7a2c") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "#PWR0107") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector:Conn_01x01_Pin") + (at 167.64 39.37 90) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "c623b86b-7f7f-40b9-93e6-26635740e815") + (property "Reference" "VCC_A2" + (at 167.64 39.37 0) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + ) + ) + (property "Value" "Conn_01x01_Pin" + (at 168.91 40.005 90) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + (hide yes) + ) + ) + (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" + (at 167.64 39.37 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 167.64 39.37 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 167.64 39.37 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "74392829-b572-4043-b75c-ce94c7303916") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "VCC_A2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector:Conn_01x01_Pin") + (at 254 107.95 90) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "c6463406-90eb-4918-8130-603a8949491f") + (property "Reference" "GND_T1" + (at 254 107.95 0) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + ) + ) + (property "Value" "Conn_01x01_Pin" + (at 255.27 108.585 90) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + (hide yes) + ) + ) + (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" + (at 254 107.95 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 254 107.95 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 254 107.95 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "dc641fdf-29e7-48f6-a8bd-98631f77428a") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "GND_T1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "power:GND") + (at 176.53 43.18 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "c826f725-7fac-419e-a838-77c3ddd24776") + (property "Reference" "#PWR?" + (at 176.53 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "GND" + (at 176.53 45.72 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 176.53 43.18 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 176.53 43.18 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 176.53 43.18 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "98716072-2d75-48d9-bd28-320352bc7e95") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "#PWR?") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector:Conn_01x01_Pin") + (at 259.08 125.73 90) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "caa6c8b8-ee7b-44c3-a728-7e55c5ac92d4") + (property "Reference" "X3A1" + (at 259.08 125.73 0) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + ) + ) + (property "Value" "Conn_01x01_Pin" + (at 260.35 126.365 90) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + (hide yes) + ) + ) + (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" + (at 259.08 125.73 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 259.08 125.73 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 259.08 125.73 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "ddde005c-04b1-441b-8f96-405d6365ad7a") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "X3A1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector:Conn_01x01_Pin") + (at 133.35 127 90) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "cb6e0e92-8106-4918-9d8c-3e3013d6e7e1") + (property "Reference" "X3B1" + (at 133.35 127 0) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + ) + ) + (property "Value" "Conn_01x01_Pin" + (at 134.62 127.635 90) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + (hide yes) + ) + ) + (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" + (at 133.35 127 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 133.35 127 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 133.35 127 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "83ee8894-d279-409f-872d-1bb4b54b4711") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "X3B1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector:Conn_01x01_Pin") + (at 130.81 140.97 90) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "cf4c5d8d-0c85-43b3-b2ab-eff2610198e1") + (property "Reference" "X1" + (at 130.81 140.97 0) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + ) + ) + (property "Value" "Conn_01x01_Pin" + (at 132.08 141.605 90) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + (hide yes) + ) + ) + (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" + (at 130.81 140.97 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 130.81 140.97 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 130.81 140.97 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "ede1e98a-7f1e-4164-9b48-4f99624e3fdb") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "X1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C_Polarized") + (at 120.65 50.8 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "d1189f40-af74-4922-94ba-fe238cf5f19c") + (property "Reference" "C9" + (at 120.65 48.26 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "47uF 35v" + (at 115.57 53.34 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "C47u35v:CAPPRD200W50D525H1250" + (at 121.6152 54.61 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 120.65 50.8 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 120.65 50.8 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "2" + (uuid "21347f6b-880b-454c-b525-e7b32506f81a") + ) + (pin "1" + (uuid "e6fee27c-9b54-4d6a-af33-e23eae7903bd") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "C9") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "power:GND") + (at 45.72 76.2 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "d2d03453-a471-47e3-b8a0-21c302ee4b55") + (property "Reference" "#PWR0101" + (at 45.72 82.55 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Value" "GND" + (at 45.72 81.28 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 45.72 76.2 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "" + (at 45.72 76.2 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 45.72 76.2 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "d5bd19b3-cf01-497e-9f3d-63ee2e537d2d") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "#PWR0101") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Connector:Conn_01x01_Pin") + (at 152.4 66.04 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "dc9beee8-362a-431f-ae58-61cdcb6832dc") + (property "Reference" "GND_A1" + (at 152.4 66.04 0) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + ) + ) + (property "Value" "Conn_01x01_Pin" + (at 151.765 67.31 90) + (effects + (font + (size 1.27 1.27) + ) + (justify right) + (hide yes) + ) + ) + (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" + (at 152.4 66.04 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 152.4 66.04 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 152.4 66.04 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "384d9e59-0cf8-4a8b-8799-c7ed8eb90760") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "GND_A1") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 64.77 40.64 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "dffbb023-66a6-4908-bab6-7170bcf5a1bb") + (property "Reference" "R18" + (at 64.77 36.83 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "47K" + (at 64.77 44.45 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (at 62.992 40.64 90) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 64.77 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 64.77 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "2" + (uuid "d03037c0-1efd-4222-9884-4ef4e95956c7") + ) + (pin "1" + (uuid "18557c98-42f0-44bd-8418-c4ad8636e6c1") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "R18") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "OPA1642AID:OPA1642AID") + (at 81.28 91.44 0) + (mirror x) + (unit 2) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "e46d3b5f-0bed-4df1-a7ff-7fb3e0496ac5") + (property "Reference" "IC2" + (at 82.55 87.63 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "OPA1642AID" + (at 86.36 95.25 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "opa1642:SOIC127P600X175-8N" + (at 81.28 91.44 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "Datasheet" "" + (at 81.28 91.44 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "\n \n Dual SoundPlus™ high-performance, JFET-input audio op amp\n \n" + (at 81.28 91.44 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "MF" "Texas Instruments" + (at 81.28 91.44 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "MAXIMUM_PACKAGE_HEIGHT" "1.75 mm" + (at 81.28 91.44 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "Package" "SOIC-8 Texas Instruments" + (at 81.28 91.44 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "Price" "None" + (at 81.28 91.44 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "Check_prices" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=eda" + (at 81.28 91.44 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "STANDARD" "IPC 7351B" + (at 81.28 91.44 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "PARTREV" "D" + (at 81.28 91.44 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "SnapEDA_Link" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=snap" + (at 81.28 91.44 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "MP" "OPA1642AID" + (at 81.28 91.44 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "Availability" "In Stock" + (at 81.28 91.44 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (property "MANUFACTURER" "Texas Instruments" + (at 81.28 91.44 0) + (effects + (font + (size 1.27 1.27) + ) + (justify bottom) + (hide yes) + ) + ) + (pin "1" + (uuid "8eb7a723-ff49-4e64-bcff-d54dedebf6df") + ) + (pin "7" + (uuid "c8f04e9e-37cd-44d0-befd-fa1c054349ef") + ) + (pin "4" + (uuid "5ea9edc8-d7e5-498d-a5e1-f4d8f0e59842") + ) + (pin "2" + (uuid "223a6f4e-dc79-479d-8844-0b96b300e0c7") + ) + (pin "6" + (uuid "c36582c0-b02a-453d-9f70-9abbd6fba04b") + ) + (pin "8" + (uuid "30ff56b3-f2da-4beb-89d7-da61228bd145") + ) + (pin "3" + (uuid "bf170eff-2b68-464c-8e53-81064b7f76b2") + ) + (pin "5" + (uuid "1c1b288a-a713-40eb-8869-436701df4af8") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "IC2") + (unit 2) + ) + ) + ) + ) + (symbol + (lib_id "power:GND") + (at 250.19 102.87 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (fields_autoplaced yes) + (uuid "e53bcdf9-738a-48e4-a152-a14a08270ebd") + (property "Reference" "#PWR0114" + (at 250.19 109.22 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Value" "GND" + (at 250.19 107.95 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 250.19 102.87 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "" + (at 250.19 102.87 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 250.19 102.87 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "c624e79d-a3f3-4f3c-98ab-5bbe94e84744") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "#PWR0114") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 247.65 66.04 90) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "e7bc09ca-c05b-46b5-a6ac-36183d8d76a3") + (property "Reference" "R2" + (at 242.57 67.31 90) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "47" + (at 251.46 67.31 90) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (at 247.65 67.818 90) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 247.65 66.04 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 247.65 66.04 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "2" + (uuid "811bcd25-7683-450d-a0f6-4cbf30fe16d7") + ) + (pin "1" + (uuid "b446f901-9264-4de1-a7f4-e94b77c4b7a7") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "R2") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:C_Polarized") + (at 176.53 38.1 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "e99cf364-578f-476c-924e-844a1b1a8e85") + (property "Reference" "C7" + (at 176.53 35.56 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "47uF 35v" + (at 171.45 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "C47u35v:CAPPRD200W50D525H1250" + (at 177.4952 41.91 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 176.53 38.1 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 176.53 38.1 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "2" + (uuid "7fbc65c4-a622-4af7-8427-e54f1f86ba89") + ) + (pin "1" + (uuid "02fe146f-014e-4c3e-acf4-171e7ba0e1ca") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "C7") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 105.41 40.64 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "ecfd7613-45e7-4949-88b5-f33fd1e3a59e") + (property "Reference" "R15" + (at 105.41 36.83 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "330" + (at 105.41 44.45 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (at 103.632 40.64 90) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 105.41 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 105.41 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "2" + (uuid "ca1d0729-2505-4402-9f17-357bcc7bb1bb") + ) + (pin "1" + (uuid "0f86676d-62aa-41b0-b91a-cde645257906") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "R15") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "power:GND") + (at 57.15 44.45 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "f6cb3d82-f698-47c9-b4a5-7d6c197cce6b") + (property "Reference" "#PWR?" + (at 57.15 41.91 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "GND" + (at 57.15 46.99 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 57.15 44.45 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 57.15 44.45 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 57.15 44.45 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "78c3d887-baba-422a-aa92-2cf9a2d56981") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "#PWR?") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "Device:R") + (at 236.22 49.53 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "f8426791-547e-42ff-b8e0-5863e33d65fa") + (property "Reference" "R3" + (at 236.22 45.72 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Value" "2.2K" + (at 236.22 53.34 0) + (effects + (font + (size 1.27 1.27) + ) + (justify left) + ) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" + (at 234.442 49.53 90) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 236.22 49.53 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 236.22 49.53 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "2" + (uuid "316da01b-6ffd-488d-82e6-871c663cd358") + ) + (pin "1" + (uuid "cab12070-cd00-4eeb-aa04-57f317411ced") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "R3") + (unit 1) + ) + ) + ) + ) + (symbol + (lib_id "power:GND") + (at 182.88 43.18 0) + (unit 1) + (exclude_from_sim no) + (in_bom yes) + (on_board yes) + (dnp no) + (uuid "faf0d463-3fd5-4414-bd12-c3fdcbe9c493") + (property "Reference" "#PWR?" + (at 182.88 40.64 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Value" "GND" + (at 182.88 45.72 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (property "Footprint" "" + (at 182.88 43.18 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Datasheet" "~" + (at 182.88 43.18 0) + (effects + (font + (size 1.27 1.27) + ) + (hide yes) + ) + ) + (property "Description" "" + (at 182.88 43.18 0) + (effects + (font + (size 1.27 1.27) + ) + ) + ) + (pin "1" + (uuid "35ab5bfa-400d-4cd7-a31a-fc9054a076b6") + ) + (instances + (project "mic_preamp_pcb_prototype_p2" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "#PWR?") + (unit 1) + ) + ) + ) + ) + (sheet_instances + (path "/" + (page "1") + ) + ) + (embedded_fonts no) +) diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/mic_preamp_pcb_prototype_p2.kicad_sch.before-fix-2026-04-20 b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/mic_preamp_pcb_prototype_p2.kicad_sch.before-fix-2026-04-20 new file mode 100644 index 0000000..6a6e1cb --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/mic_preamp_pcb_prototype_p2.kicad_sch.before-fix-2026-04-20 @@ -0,0 +1,3381 @@ +(kicad_sch (version 20230121) (generator eeschema) + + (uuid dde26cd9-6a98-439e-b5e9-17da5761ec2e) + + (paper "A4") + + (lib_symbols + (symbol "Connector:Conn_01x01_Pin" (pin_names (offset 1.016) hide) (in_bom yes) (on_board yes) + (property "Reference" "J" (at 0 2.54 0) + (effects (font (size 1.27 1.27))) + ) + (property "Value" "Conn_01x01_Pin" (at 0 -2.54 0) + (effects (font (size 1.27 1.27))) + ) + (property "Footprint" "" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "ki_locked" "" (at 0 0 0) + (effects (font (size 1.27 1.27))) + ) + (property "ki_keywords" "connector" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "ki_description" "Generic connector, single row, 01x01, script generated" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "ki_fp_filters" "Connector*:*_1x??_*" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (symbol "Conn_01x01_Pin_1_1" + (polyline + (pts + (xy 1.27 0) + (xy 0.8636 0) + ) + (stroke (width 0.1524) (type default)) + (fill (type none)) + ) + (rectangle (start 0.8636 0.127) (end 0 -0.127) + (stroke (width 0.1524) (type default)) + (fill (type outline)) + ) + (pin passive line (at 5.08 0 180) (length 3.81) + (name "Pin_1" (effects (font (size 1.27 1.27)))) + (number "1" (effects (font (size 1.27 1.27)))) + ) + ) + ) + (symbol "Connector_Generic:Conn_01x01" (pin_names (offset 1.016) hide) (in_bom yes) (on_board yes) + (property "Reference" "J" (at 0 2.54 0) + (effects (font (size 1.27 1.27))) + ) + (property "Value" "Conn_01x01" (at 0 -2.54 0) + (effects (font (size 1.27 1.27))) + ) + (property "Footprint" "" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "ki_keywords" "connector" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "ki_description" "Generic connector, single row, 01x01, script generated (kicad-library-utils/schlib/autogen/connector/)" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "ki_fp_filters" "Connector*:*_1x??_*" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (symbol "Conn_01x01_1_1" + (rectangle (start -1.27 0.127) (end 0 -0.127) + (stroke (width 0.1524) (type default)) + (fill (type none)) + ) + (rectangle (start -1.27 1.27) (end 1.27 -1.27) + (stroke (width 0.254) (type default)) + (fill (type background)) + ) + (pin passive line (at -5.08 0 0) (length 3.81) + (name "Pin_1" (effects (font (size 1.27 1.27)))) + (number "1" (effects (font (size 1.27 1.27)))) + ) + ) + ) + (symbol "Device:C" (pin_numbers hide) (pin_names (offset 0.254)) (in_bom yes) (on_board yes) + (property "Reference" "C" (at 0.635 2.54 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Value" "C" (at 0.635 -2.54 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Footprint" "" (at 0.9652 -3.81 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "ki_keywords" "cap capacitor" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "ki_description" "Unpolarized capacitor" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "ki_fp_filters" "C_*" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (symbol "C_0_1" + (polyline + (pts + (xy -2.032 -0.762) + (xy 2.032 -0.762) + ) + (stroke (width 0.508) (type default)) + (fill (type none)) + ) + (polyline + (pts + (xy -2.032 0.762) + (xy 2.032 0.762) + ) + (stroke (width 0.508) (type default)) + (fill (type none)) + ) + ) + (symbol "C_1_1" + (pin passive line (at 0 3.81 270) (length 2.794) + (name "~" (effects (font (size 1.27 1.27)))) + (number "1" (effects (font (size 1.27 1.27)))) + ) + (pin passive line (at 0 -3.81 90) (length 2.794) + (name "~" (effects (font (size 1.27 1.27)))) + (number "2" (effects (font (size 1.27 1.27)))) + ) + ) + ) + (symbol "Device:C_Polarized" (pin_numbers hide) (pin_names (offset 0.254)) (in_bom yes) (on_board yes) + (property "Reference" "C" (at 0.635 2.54 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Value" "C_Polarized" (at 0.635 -2.54 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Footprint" "" (at 0.9652 -3.81 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "ki_keywords" "cap capacitor" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "ki_description" "Polarized capacitor" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "ki_fp_filters" "CP_*" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (symbol "C_Polarized_0_1" + (rectangle (start -2.286 0.508) (end 2.286 1.016) + (stroke (width 0) (type default)) + (fill (type none)) + ) + (polyline + (pts + (xy -1.778 2.286) + (xy -0.762 2.286) + ) + (stroke (width 0) (type default)) + (fill (type none)) + ) + (polyline + (pts + (xy -1.27 2.794) + (xy -1.27 1.778) + ) + (stroke (width 0) (type default)) + (fill (type none)) + ) + (rectangle (start 2.286 -0.508) (end -2.286 -1.016) + (stroke (width 0) (type default)) + (fill (type outline)) + ) + ) + (symbol "C_Polarized_1_1" + (pin passive line (at 0 3.81 270) (length 2.794) + (name "~" (effects (font (size 1.27 1.27)))) + (number "1" (effects (font (size 1.27 1.27)))) + ) + (pin passive line (at 0 -3.81 90) (length 2.794) + (name "~" (effects (font (size 1.27 1.27)))) + (number "2" (effects (font (size 1.27 1.27)))) + ) + ) + ) + (symbol "Device:D" (pin_numbers hide) (pin_names (offset 1.016) hide) (in_bom yes) (on_board yes) + (property "Reference" "D" (at 0 2.54 0) + (effects (font (size 1.27 1.27))) + ) + (property "Value" "D" (at 0 -2.54 0) + (effects (font (size 1.27 1.27))) + ) + (property "Footprint" "" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Sim.Device" "D" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Sim.Pins" "1=K 2=A" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "ki_keywords" "diode" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "ki_description" "Diode" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "ki_fp_filters" "TO-???* *_Diode_* *SingleDiode* D_*" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (symbol "D_0_1" + (polyline + (pts + (xy -1.27 1.27) + (xy -1.27 -1.27) + ) + (stroke (width 0.254) (type default)) + (fill (type none)) + ) + (polyline + (pts + (xy 1.27 0) + (xy -1.27 0) + ) + (stroke (width 0) (type default)) + (fill (type none)) + ) + (polyline + (pts + (xy 1.27 1.27) + (xy 1.27 -1.27) + (xy -1.27 0) + (xy 1.27 1.27) + ) + (stroke (width 0.254) (type default)) + (fill (type none)) + ) + ) + (symbol "D_1_1" + (pin passive line (at -3.81 0 0) (length 2.54) + (name "K" (effects (font (size 1.27 1.27)))) + (number "1" (effects (font (size 1.27 1.27)))) + ) + (pin passive line (at 3.81 0 180) (length 2.54) + (name "A" (effects (font (size 1.27 1.27)))) + (number "2" (effects (font (size 1.27 1.27)))) + ) + ) + ) + (symbol "Device:R" (pin_numbers hide) (pin_names (offset 0)) (in_bom yes) (on_board yes) + (property "Reference" "R" (at 2.032 0 90) + (effects (font (size 1.27 1.27))) + ) + (property "Value" "R" (at 0 0 90) + (effects (font (size 1.27 1.27))) + ) + (property "Footprint" "" (at -1.778 0 90) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "ki_keywords" "R res resistor" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "ki_description" "Resistor" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "ki_fp_filters" "R_*" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (symbol "R_0_1" + (rectangle (start -1.016 -2.54) (end 1.016 2.54) + (stroke (width 0.254) (type default)) + (fill (type none)) + ) + ) + (symbol "R_1_1" + (pin passive line (at 0 3.81 270) (length 1.27) + (name "~" (effects (font (size 1.27 1.27)))) + (number "1" (effects (font (size 1.27 1.27)))) + ) + (pin passive line (at 0 -3.81 90) (length 1.27) + (name "~" (effects (font (size 1.27 1.27)))) + (number "2" (effects (font (size 1.27 1.27)))) + ) + ) + ) + (symbol "OPA1642AID:OPA1642AID" (pin_names (offset 1.016)) (in_bom yes) (on_board yes) + (property "Reference" "U" (at 2.54 3.175 0) + (effects (font (size 1.27 1.27)) (justify left bottom)) + ) + (property "Value" "OPA1642AID" (at 2.54 -5.08 0) + (effects (font (size 1.27 1.27)) (justify left bottom)) + ) + (property "Footprint" "OPA1642AID:SOIC127P599X175-8N" (at 0 0 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "Datasheet" "" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "MF" "Texas Instruments" (at 0 0 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "MAXIMUM_PACKAGE_HEIGHT" "1.75 mm" (at 0 0 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "Package" "SOIC-8 Texas Instruments" (at 0 0 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "Price" "None" (at 0 0 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "Check_prices" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=eda" (at 0 0 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "STANDARD" "IPC 7351B" (at 0 0 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "PARTREV" "D" (at 0 0 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "SnapEDA_Link" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=snap" (at 0 0 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "MP" "OPA1642AID" (at 0 0 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "Description" "\n \n Dual SoundPlus™ high-performance, JFET-input audio op amp\n \n" (at 0 0 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "Availability" "In Stock" (at 0 0 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "MANUFACTURER" "Texas Instruments" (at 0 0 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (symbol "OPA1642AID_1_0" + (polyline + (pts + (xy -5.08 -5.08) + (xy 5.08 0) + ) + (stroke (width 0.4064) (type default)) + (fill (type none)) + ) + (polyline + (pts + (xy -5.08 5.08) + (xy -5.08 -5.08) + ) + (stroke (width 0.4064) (type default)) + (fill (type none)) + ) + (polyline + (pts + (xy -4.445 -2.54) + (xy -3.175 -2.54) + ) + (stroke (width 0.1524) (type default)) + (fill (type none)) + ) + (polyline + (pts + (xy -4.445 2.54) + (xy -3.175 2.54) + ) + (stroke (width 0.1524) (type default)) + (fill (type none)) + ) + (polyline + (pts + (xy -3.81 -1.905) + (xy -3.81 -3.175) + ) + (stroke (width 0.1524) (type default)) + (fill (type none)) + ) + (polyline + (pts + (xy 5.08 0) + (xy -5.08 5.08) + ) + (stroke (width 0.4064) (type default)) + (fill (type none)) + ) + (text "V+" (at 1.27 3.175 900) + (effects (font (size 0.8128 0.8128)) (justify left bottom)) + ) + (text "V-" (at 1.27 -4.826 900) + (effects (font (size 0.8128 0.8128)) (justify left bottom)) + ) + (pin output line (at 10.16 0 180) (length 5.08) + (name "~" (effects (font (size 1.016 1.016)))) + (number "1" (effects (font (size 1.016 1.016)))) + ) + (pin input line (at -10.16 2.54 0) (length 5.08) + (name "~" (effects (font (size 1.016 1.016)))) + (number "2" (effects (font (size 1.016 1.016)))) + ) + (pin input line (at -10.16 -2.54 0) (length 5.08) + (name "~" (effects (font (size 1.016 1.016)))) + (number "3" (effects (font (size 1.016 1.016)))) + ) + (pin power_in line (at 0 -7.62 90) (length 5.08) + (name "~" (effects (font (size 1.016 1.016)))) + (number "4" (effects (font (size 1.016 1.016)))) + ) + (pin power_in line (at 0 7.62 270) (length 5.08) + (name "~" (effects (font (size 1.016 1.016)))) + (number "8" (effects (font (size 1.016 1.016)))) + ) + ) + (symbol "OPA1642AID_2_0" + (polyline + (pts + (xy -5.08 -5.08) + (xy 5.08 0) + ) + (stroke (width 0.4064) (type default)) + (fill (type none)) + ) + (polyline + (pts + (xy -5.08 5.08) + (xy -5.08 -5.08) + ) + (stroke (width 0.4064) (type default)) + (fill (type none)) + ) + (polyline + (pts + (xy -4.445 -2.54) + (xy -3.175 -2.54) + ) + (stroke (width 0.1524) (type default)) + (fill (type none)) + ) + (polyline + (pts + (xy -4.445 2.54) + (xy -3.175 2.54) + ) + (stroke (width 0.1524) (type default)) + (fill (type none)) + ) + (polyline + (pts + (xy -3.81 -1.905) + (xy -3.81 -3.175) + ) + (stroke (width 0.1524) (type default)) + (fill (type none)) + ) + (polyline + (pts + (xy 5.08 0) + (xy -5.08 5.08) + ) + (stroke (width 0.4064) (type default)) + (fill (type none)) + ) + (pin input line (at -10.16 -2.54 0) (length 5.08) + (name "~" (effects (font (size 1.016 1.016)))) + (number "5" (effects (font (size 1.016 1.016)))) + ) + (pin input line (at -10.16 2.54 0) (length 5.08) + (name "~" (effects (font (size 1.016 1.016)))) + (number "6" (effects (font (size 1.016 1.016)))) + ) + (pin output line (at 10.16 0 180) (length 5.08) + (name "~" (effects (font (size 1.016 1.016)))) + (number "7" (effects (font (size 1.016 1.016)))) + ) + ) + ) + (symbol "power:Earth" (power) (pin_names (offset 0)) (in_bom yes) (on_board yes) + (property "Reference" "#PWR" (at 0 -6.35 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Value" "Earth" (at 0 -3.81 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Footprint" "" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "ki_keywords" "global ground gnd" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "ki_description" "Power symbol creates a global label with name \"Earth\"" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (symbol "Earth_0_1" + (polyline + (pts + (xy -0.635 -1.905) + (xy 0.635 -1.905) + ) + (stroke (width 0) (type default)) + (fill (type none)) + ) + (polyline + (pts + (xy -0.127 -2.54) + (xy 0.127 -2.54) + ) + (stroke (width 0) (type default)) + (fill (type none)) + ) + (polyline + (pts + (xy 0 -1.27) + (xy 0 0) + ) + (stroke (width 0) (type default)) + (fill (type none)) + ) + (polyline + (pts + (xy 1.27 -1.27) + (xy -1.27 -1.27) + ) + (stroke (width 0) (type default)) + (fill (type none)) + ) + ) + (symbol "Earth_1_1" + (pin power_in line (at 0 0 270) (length 0) hide + (name "Earth" (effects (font (size 1.27 1.27)))) + (number "1" (effects (font (size 1.27 1.27)))) + ) + ) + ) + (symbol "power:GND" (power) (pin_names (offset 0)) (in_bom yes) (on_board yes) + (property "Reference" "#PWR" (at 0 -6.35 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Value" "GND" (at 0 -3.81 0) + (effects (font (size 1.27 1.27))) + ) + (property "Footprint" "" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "ki_keywords" "global power" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "ki_description" "Power symbol creates a global label with name \"GND\" , ground" (at 0 0 0) + (effects (font (size 1.27 1.27)) hide) + ) + (symbol "GND_0_1" + (polyline + (pts + (xy 0 0) + (xy 0 -1.27) + (xy 1.27 -1.27) + (xy 0 -2.54) + (xy -1.27 -1.27) + (xy 0 -1.27) + ) + (stroke (width 0) (type default)) + (fill (type none)) + ) + ) + (symbol "GND_1_1" + (pin power_in line (at 0 0 270) (length 0) hide + (name "GND" (effects (font (size 1.27 1.27)))) + (number "1" (effects (font (size 1.27 1.27)))) + ) + ) + ) + ) + + (junction (at 176.53 33.02) (diameter 0) (color 0 0 0 0) + (uuid 00589357-8e78-4b48-ae28-55a325e7e60d) + ) + (junction (at 57.15 34.29) (diameter 0) (color 0 0 0 0) + (uuid 09588201-8b42-44b7-819e-c8f5ab4dc089) + ) + (junction (at 64.77 34.29) (diameter 0) (color 0 0 0 0) + (uuid 16b0b64c-300f-48e4-b5e3-6530295f7432) + ) + (junction (at 110.49 45.72) (diameter 0) (color 0 0 0 0) + (uuid 1fedaa26-68d8-43e0-9f71-7347c3987ea2) + ) + (junction (at 105.41 67.31) (diameter 0) (color 0 0 0 0) + (uuid 2197faeb-7074-4b3f-b0ae-c0c6950c6115) + ) + (junction (at 182.88 33.02) (diameter 0) (color 0 0 0 0) + (uuid 22226dcb-761d-4e21-8926-5e3e670d73b4) + ) + (junction (at 190.5 33.02) (diameter 0) (color 0 0 0 0) + (uuid 2b758264-7c69-4e0c-93be-2efbcb50a2c0) + ) + (junction (at 92.71 91.44) (diameter 0) (color 0 0 0 0) + (uuid 2e7b2632-ec2f-4541-8baa-fe7738ac00ce) + ) + (junction (at 130.81 102.87) (diameter 0) (color 0 0 0 0) + (uuid 31a0fa79-136a-44fe-886c-461ed761bcd9) + ) + (junction (at 246.38 44.45) (diameter 0) (color 0 0 0 0) + (uuid 34017a92-c9bf-47c6-82c9-f179df22de8e) + ) + (junction (at 69.85 48.26) (diameter 0) (color 0 0 0 0) + (uuid 3a063535-13d8-4452-8527-87ecc8b8bafd) + ) + (junction (at 218.44 90.17) (diameter 0) (color 0 0 0 0) + (uuid 506c6fe0-54fc-4644-b472-af2712a66982) + ) + (junction (at 50.8 34.29) (diameter 0) (color 0 0 0 0) + (uuid 52d16d23-5d99-4997-9606-6a432c5ed42c) + ) + (junction (at 110.49 91.44) (diameter 0) (color 0 0 0 0) + (uuid 6e7975c6-e34f-49fe-8979-b54dde5b3afa) + ) + (junction (at 135.89 45.72) (diameter 0) (color 0 0 0 0) + (uuid 7143fe68-cd97-4817-ad2c-119aed5e1e98) + ) + (junction (at 219.71 96.52) (diameter 0) (color 0 0 0 0) + (uuid 72610660-92b2-4c67-9420-a83a3b6c5fe8) + ) + (junction (at 160.02 63.5) (diameter 0) (color 0 0 0 0) + (uuid 7c17383d-56a7-44e5-a84d-f9087e67706a) + ) + (junction (at 254 44.45) (diameter 0) (color 0 0 0 0) + (uuid 8b6bfe60-3dc6-4264-96f7-e3717e7adb54) + ) + (junction (at 250.19 101.6) (diameter 0) (color 0 0 0 0) + (uuid 8c585ad5-91e8-4583-b2d8-0474483941bd) + ) + (junction (at 130.81 134.62) (diameter 0) (color 0 0 0 0) + (uuid 9028dbdb-828c-44c9-8913-4012ea279758) + ) + (junction (at 128.27 102.87) (diameter 0) (color 0 0 0 0) + (uuid 94ec2774-6ecc-4c4c-8ff7-25af5bc253b2) + ) + (junction (at 254 101.6) (diameter 0) (color 0 0 0 0) + (uuid 96a9a85d-09cd-4d8c-a932-99a3f6e299fa) + ) + (junction (at 261.62 44.45) (diameter 0) (color 0 0 0 0) + (uuid 9e1c806d-87fc-406a-a639-bcaeb441f29f) + ) + (junction (at 190.5 46.99) (diameter 0) (color 0 0 0 0) + (uuid a2e2e3ef-4659-4007-b817-ded43a82b6ad) + ) + (junction (at 231.14 44.45) (diameter 0) (color 0 0 0 0) + (uuid a7f346ae-f212-4dac-bed0-b846ad63e47e) + ) + (junction (at 105.41 45.72) (diameter 0) (color 0 0 0 0) + (uuid ac48b7f1-5297-4449-ba90-97fe45c07c15) + ) + (junction (at 231.14 66.04) (diameter 0) (color 0 0 0 0) + (uuid b77b5e27-f925-4c66-b4ba-d614a7032f1a) + ) + (junction (at 171.45 33.02) (diameter 0) (color 0 0 0 0) + (uuid bb063fe2-6534-4b28-99e0-da8d833215b1) + ) + (junction (at 64.77 48.26) (diameter 0) (color 0 0 0 0) + (uuid be418af7-2d0e-41ac-a848-fa5787a5fcd0) + ) + (junction (at 45.72 34.29) (diameter 0) (color 0 0 0 0) + (uuid c31e8219-696e-409a-8d87-dadc8b1a0d37) + ) + (junction (at 93.98 97.79) (diameter 0) (color 0 0 0 0) + (uuid c5697ae5-e8d7-4567-96b2-c46c35186d3b) + ) + (junction (at 195.58 46.99) (diameter 0) (color 0 0 0 0) + (uuid d20ebbb5-9e1b-439e-9109-a96a9c0da384) + ) + (junction (at 128.27 45.72) (diameter 0) (color 0 0 0 0) + (uuid d3939fce-7f5c-4b01-af8c-43fdf06aa9b4) + ) + (junction (at 236.22 44.45) (diameter 0) (color 0 0 0 0) + (uuid e1d9b8d6-2f6b-46b2-a5d7-a46c5f27b3ba) + ) + (junction (at 34.29 64.77) (diameter 0) (color 0 0 0 0) + (uuid e991ca0a-385e-45f3-b8db-5c612be6f19d) + ) + (junction (at 236.22 90.17) (diameter 0) (color 0 0 0 0) + (uuid eaa05d34-930c-4892-b0e5-6ea6106cf656) + ) + (junction (at 120.65 45.72) (diameter 0) (color 0 0 0 0) + (uuid f4b65052-dac7-4f36-bf7c-48aa76d3179f) + ) + (junction (at 194.31 81.28) (diameter 0) (color 0 0 0 0) + (uuid fb68e80d-0477-432b-9927-a247553d8d2d) + ) + (junction (at 68.58 82.55) (diameter 0) (color 0 0 0 0) + (uuid ffa8159e-09d6-41df-8412-f708e67ac562) + ) + + (wire (pts (xy 132.08 92.71) (xy 133.35 92.71)) + (stroke (width 0) (type default)) + (uuid 02ffd185-3759-49b3-8c77-2e0613d4dfc1) + ) + (wire (pts (xy 133.35 67.31) (xy 125.73 67.31)) + (stroke (width 0) (type default)) + (uuid 0356e5f5-98e0-41ac-986a-3a5c50e15865) + ) + (wire (pts (xy 171.45 73.66) (xy 171.45 74.93)) + (stroke (width 0) (type default)) + (uuid 04fa697f-ba4f-4896-9ec8-bc29f296ab27) + ) + (wire (pts (xy 261.62 45.72) (xy 261.62 44.45)) + (stroke (width 0) (type default)) + (uuid 054de042-36c6-466d-addf-52404f9a5cf5) + ) + (wire (pts (xy 132.08 91.44) (xy 125.73 91.44)) + (stroke (width 0) (type default)) + (uuid 07f957aa-8cbd-46c5-b269-0dd7732ae0b0) + ) + (wire (pts (xy 86.36 82.55) (xy 92.71 82.55)) + (stroke (width 0) (type default)) + (uuid 091a8572-79a5-4536-b85d-bab77e5807f6) + ) + (wire (pts (xy 196.85 92.71) (xy 194.31 92.71)) + (stroke (width 0) (type default)) + (uuid 0948c5ac-1f77-48ec-94a4-0f80cc03c66a) + ) + (wire (pts (xy 64.77 36.83) (xy 64.77 34.29)) + (stroke (width 0) (type default)) + (uuid 09bff6a2-4405-4b1c-b1c7-8770f1b83251) + ) + (wire (pts (xy 110.49 54.61) (xy 110.49 91.44)) + (stroke (width 0) (type default)) + (uuid 0a92ccac-a9ba-41ec-9130-6efa152b8c7c) + ) + (wire (pts (xy 120.65 45.72) (xy 128.27 45.72)) + (stroke (width 0) (type default)) + (uuid 0c093a6d-daaf-49d0-915e-5c6ba985c32f) + ) + (wire (pts (xy 71.12 93.98) (xy 68.58 93.98)) + (stroke (width 0) (type default)) + (uuid 0c103657-0555-49c9-8325-2766ddb6c34f) + ) + (wire (pts (xy 254 101.6) (xy 254 102.87)) + (stroke (width 0) (type default)) + (uuid 0c5e5cac-35ca-4a13-9be1-b006870f52be) + ) + (wire (pts (xy 182.88 41.91) (xy 182.88 43.18)) + (stroke (width 0) (type default)) + (uuid 0cce7c82-3eb4-4b62-871a-55f7b76e03fa) + ) + (wire (pts (xy 30.48 67.31) (xy 33.02 67.31)) + (stroke (width 0) (type default)) + (uuid 0d2f807f-742b-4768-94ba-95a2e0dbb27e) + ) + (wire (pts (xy 194.31 92.71) (xy 194.31 81.28)) + (stroke (width 0) (type default)) + (uuid 0dcc1259-f63a-4cdb-8738-f5795f1b3254) + ) + (wire (pts (xy 160.02 49.53) (xy 160.02 46.99)) + (stroke (width 0) (type default)) + (uuid 0e08d303-8030-47a4-80b3-c8e23305f124) + ) + (wire (pts (xy 135.89 68.58) (xy 135.89 121.92)) + (stroke (width 0) (type default)) + (uuid 0ecd9114-c5f3-41b1-bbaf-d0bf23bf8c72) + ) + (wire (pts (xy 69.85 88.9) (xy 69.85 48.26)) + (stroke (width 0) (type default)) + (uuid 0f14fdbd-45c6-4587-9179-a25b05c2e830) + ) + (wire (pts (xy 110.49 46.99) (xy 110.49 45.72)) + (stroke (width 0) (type default)) + (uuid 12318da3-5c3c-4ee8-be25-587a325bb671) + ) + (wire (pts (xy 130.81 102.87) (xy 130.81 134.62)) + (stroke (width 0) (type default)) + (uuid 14914217-99a2-4d1d-a175-3837138c9f9d) + ) + (wire (pts (xy 190.5 43.18) (xy 190.5 46.99)) + (stroke (width 0) (type default)) + (uuid 149d755e-650f-464a-b013-2877ffe94d53) + ) + (wire (pts (xy 167.64 33.02) (xy 167.64 34.29)) + (stroke (width 0) (type default)) + (uuid 1612cd4b-7389-451b-b032-7c60262b86ba) + ) + (wire (pts (xy 158.75 96.52) (xy 158.75 66.04)) + (stroke (width 0) (type default)) + (uuid 17c7e460-170d-43ec-9eda-22024b3b9d49) + ) + (wire (pts (xy 35.56 69.85) (xy 34.29 69.85)) + (stroke (width 0) (type default)) + (uuid 1910092b-7ffc-4db7-bd95-7f862afcc95a) + ) + (wire (pts (xy 64.77 44.45) (xy 64.77 48.26)) + (stroke (width 0) (type default)) + (uuid 19585c84-7781-4da6-b4c5-c2bb13cc74af) + ) + (wire (pts (xy 34.29 64.77) (xy 35.56 64.77)) + (stroke (width 0) (type default)) + (uuid 1a7dbebb-ec04-47d8-bb6f-a2411e559e67) + ) + (wire (pts (xy 95.25 67.31) (xy 55.88 67.31)) + (stroke (width 0) (type default)) + (uuid 1aa930ab-dc21-4937-8ecb-8e83e978bda0) + ) + (wire (pts (xy 161.29 68.58) (xy 160.02 68.58)) + (stroke (width 0) (type default)) + (uuid 1b40b0b7-7380-48ed-9812-f23bddb9be2a) + ) + (wire (pts (xy 195.58 46.99) (xy 219.71 46.99)) + (stroke (width 0) (type default)) + (uuid 1eba57e1-ae3d-47e1-9db3-7eb057abc06d) + ) + (wire (pts (xy 93.98 48.26) (xy 93.98 49.53)) + (stroke (width 0) (type default)) + (uuid 1f841559-9f10-4f15-a62a-5f8e9b558097) + ) + (wire (pts (xy 30.48 64.77) (xy 34.29 64.77)) + (stroke (width 0) (type default)) + (uuid 1f90ebaf-5381-4215-87a7-0678b5409152) + ) + (wire (pts (xy 220.98 66.04) (xy 181.61 66.04)) + (stroke (width 0) (type default)) + (uuid 20e1f14e-246f-408b-9bc9-45a3480af913) + ) + (wire (pts (xy 246.38 44.45) (xy 254 44.45)) + (stroke (width 0) (type default)) + (uuid 22cb0afe-5c07-4150-8264-9d54a11f4480) + ) + (wire (pts (xy 45.72 34.29) (xy 41.91 34.29)) + (stroke (width 0) (type default)) + (uuid 2373e140-4aee-4605-bb6d-a1aa0003ca85) + ) + (wire (pts (xy 92.71 82.55) (xy 92.71 91.44)) + (stroke (width 0) (type default)) + (uuid 2387ac61-6080-40df-9809-adfa32c9436d) + ) + (wire (pts (xy 267.97 45.72) (xy 267.97 44.45)) + (stroke (width 0) (type default)) + (uuid 24a76783-3bad-4ee9-aefe-a83c1207056d) + ) + (wire (pts (xy 130.81 134.62) (xy 130.81 135.89)) + (stroke (width 0) (type default)) + (uuid 2640e604-e51f-4854-b146-214b7487dbf8) + ) + (wire (pts (xy 245.11 101.6) (xy 250.19 101.6)) + (stroke (width 0) (type default)) + (uuid 2995443d-90a6-43a8-a5f9-059384375554) + ) + (wire (pts (xy 64.77 48.26) (xy 64.77 49.53)) + (stroke (width 0) (type default)) + (uuid 2a885e5e-7d91-4b49-82e4-0cb3564efb77) + ) + (wire (pts (xy 105.41 67.31) (xy 118.11 67.31)) + (stroke (width 0) (type default)) + (uuid 2b091d4b-29fd-474e-baf6-eb6d449ae010) + ) + (wire (pts (xy 231.14 43.18) (xy 231.14 44.45)) + (stroke (width 0) (type default)) + (uuid 2b42269e-c0f6-4ee1-a79a-ed49f1b423bc) + ) + (wire (pts (xy 261.62 44.45) (xy 254 44.45)) + (stroke (width 0) (type default)) + (uuid 2e57848c-6b0d-4203-afc5-11e7b17d4656) + ) + (wire (pts (xy 231.14 66.04) (xy 243.84 66.04)) + (stroke (width 0) (type default)) + (uuid 2f88aafa-1904-4b74-8678-eaf51e21ff15) + ) + (wire (pts (xy 110.49 45.72) (xy 120.65 45.72)) + (stroke (width 0) (type default)) + (uuid 307b7763-560b-4081-a5b0-4d9432cf7c90) + ) + (wire (pts (xy 142.24 46.99) (xy 142.24 45.72)) + (stroke (width 0) (type default)) + (uuid 3258f2e1-c35e-4c31-b4e2-df37c4b55397) + ) + (wire (pts (xy 92.71 91.44) (xy 95.25 91.44)) + (stroke (width 0) (type default)) + (uuid 33dc630f-6894-453f-ba6d-227a76c7dfb7) + ) + (wire (pts (xy 105.41 54.61) (xy 105.41 67.31)) + (stroke (width 0) (type default)) + (uuid 343dcd1d-c956-4e75-b567-a0342845ebaf) + ) + (wire (pts (xy 34.29 82.55) (xy 49.53 82.55)) + (stroke (width 0) (type default)) + (uuid 34a62c88-aad7-4f05-a14e-a8e2c2e7aa8c) + ) + (wire (pts (xy 133.35 92.71) (xy 133.35 121.92)) + (stroke (width 0) (type default)) + (uuid 3502f113-0881-4463-86a6-57a628a4d65c) + ) + (wire (pts (xy 171.45 33.02) (xy 167.64 33.02)) + (stroke (width 0) (type default)) + (uuid 36b94fa8-f95c-4830-b262-b1f0930cdfec) + ) + (wire (pts (xy 105.41 34.29) (xy 105.41 36.83)) + (stroke (width 0) (type default)) + (uuid 3f2a71ad-7543-4d78-ace7-ec7c6a72ede5) + ) + (wire (pts (xy 250.19 101.6) (xy 254 101.6)) + (stroke (width 0) (type default)) + (uuid 3fec9f90-1e3f-4ac1-af8d-3c01828ca098) + ) + (wire (pts (xy 142.24 45.72) (xy 135.89 45.72)) + (stroke (width 0) (type default)) + (uuid 44f75a8f-3922-464d-a9cb-247c27a22aaf) + ) + (wire (pts (xy 246.38 53.34) (xy 246.38 54.61)) + (stroke (width 0) (type default)) + (uuid 46b0c5b1-32e8-4b1f-a59f-9361200bbe71) + ) + (wire (pts (xy 231.14 33.02) (xy 231.14 35.56)) + (stroke (width 0) (type default)) + (uuid 46f7a7ce-f6f7-434e-adda-6d0b3c9625db) + ) + (wire (pts (xy 190.5 46.99) (xy 195.58 46.99)) + (stroke (width 0) (type default)) + (uuid 4ba3aedf-1589-47c6-9ebb-e7f82290d39d) + ) + (wire (pts (xy 195.58 87.63) (xy 195.58 46.99)) + (stroke (width 0) (type default)) + (uuid 4c8dd0ec-3ab0-447a-baad-4b8912ad9086) + ) + (wire (pts (xy 160.02 46.99) (xy 190.5 46.99)) + (stroke (width 0) (type default)) + (uuid 4ce29b5f-6b0d-4784-a4b4-2367ea534650) + ) + (wire (pts (xy 182.88 81.28) (xy 194.31 81.28)) + (stroke (width 0) (type default)) + (uuid 4e5e987c-6db3-4385-bfef-de2b0082abf6) + ) + (wire (pts (xy 257.81 90.17) (xy 251.46 90.17)) + (stroke (width 0) (type default)) + (uuid 4ee2dd63-ff0d-448c-985c-512662b0677e) + ) + (wire (pts (xy 128.27 46.99) (xy 128.27 45.72)) + (stroke (width 0) (type default)) + (uuid 5094e56d-01bf-4fbe-9ab6-6e2261a6778c) + ) + (wire (pts (xy 171.45 33.02) (xy 171.45 58.42)) + (stroke (width 0) (type default)) + (uuid 50c5c928-9226-4ccd-86c8-f441f4c823c0) + ) + (wire (pts (xy 110.49 91.44) (xy 118.11 91.44)) + (stroke (width 0) (type default)) + (uuid 50d74203-3acf-48ab-9ab4-9cd967bb8eda) + ) + (wire (pts (xy 176.53 33.02) (xy 182.88 33.02)) + (stroke (width 0) (type default)) + (uuid 5282bfdc-ba1d-49f1-bd41-c878cb71e66f) + ) + (wire (pts (xy 218.44 90.17) (xy 220.98 90.17)) + (stroke (width 0) (type default)) + (uuid 52d0ae17-05e5-427e-9a4e-f688b490a3d6) + ) + (wire (pts (xy 34.29 50.8) (xy 34.29 48.26)) + (stroke (width 0) (type default)) + (uuid 54716c51-f35b-4e7a-b401-b965c48846e9) + ) + (wire (pts (xy 120.65 54.61) (xy 120.65 55.88)) + (stroke (width 0) (type default)) + (uuid 5651c2dd-828f-4db3-b5f0-c2517dfad025) + ) + (wire (pts (xy 195.58 87.63) (xy 196.85 87.63)) + (stroke (width 0) (type default)) + (uuid 568335cf-e2ea-411d-97a3-ee936bfa35fd) + ) + (wire (pts (xy 93.98 97.79) (xy 130.81 97.79)) + (stroke (width 0) (type default)) + (uuid 56cfe013-4549-4aed-b51f-fd23cdd4317e) + ) + (wire (pts (xy 254 45.72) (xy 254 44.45)) + (stroke (width 0) (type default)) + (uuid 57534347-04b0-4ede-a7f5-b7f0614f969c) + ) + (wire (pts (xy 212.09 81.28) (xy 218.44 81.28)) + (stroke (width 0) (type default)) + (uuid 588917aa-2b57-4704-8692-b6cbddae4b93) + ) + (wire (pts (xy 228.6 66.04) (xy 231.14 66.04)) + (stroke (width 0) (type default)) + (uuid 5d9b100c-15eb-49b8-99fa-5122b7a9e260) + ) + (wire (pts (xy 236.22 90.17) (xy 243.84 90.17)) + (stroke (width 0) (type default)) + (uuid 5f3db4a8-9552-4076-91b7-c376c4b9dfd0) + ) + (wire (pts (xy 254 101.6) (xy 256.54 101.6)) + (stroke (width 0) (type default)) + (uuid 5f97aa97-7bab-43ce-a33c-31d0b7be2ec8) + ) + (wire (pts (xy 45.72 74.93) (xy 45.72 76.2)) + (stroke (width 0) (type default)) + (uuid 5fd5e64a-f9a8-4402-851f-a357c91335b0) + ) + (wire (pts (xy 256.54 101.6) (xy 256.54 96.52)) + (stroke (width 0) (type default)) + (uuid 602aee30-db48-4e11-afcd-c2ca5b2c774f) + ) + (wire (pts (xy 133.35 68.58) (xy 135.89 68.58)) + (stroke (width 0) (type default)) + (uuid 6250034d-badf-4beb-89bb-bd15b05aa371) + ) + (wire (pts (xy 68.58 93.98) (xy 68.58 82.55)) + (stroke (width 0) (type default)) + (uuid 642834c3-92d1-4978-a38c-9c0073735e66) + ) + (wire (pts (xy 105.41 44.45) (xy 105.41 45.72)) + (stroke (width 0) (type default)) + (uuid 64a24b07-8240-46c3-904a-a58b493a9ac6) + ) + (wire (pts (xy 261.62 53.34) (xy 261.62 54.61)) + (stroke (width 0) (type default)) + (uuid 6ecf933a-4006-4cef-a646-a8bc4b3ee0e1) + ) + (wire (pts (xy 182.88 33.02) (xy 190.5 33.02)) + (stroke (width 0) (type default)) + (uuid 710d1197-a691-45c2-9b2f-d9677797cef6) + ) + (wire (pts (xy 194.31 81.28) (xy 204.47 81.28)) + (stroke (width 0) (type default)) + (uuid 7214982d-e78f-4016-8929-772d89d4255a) + ) + (wire (pts (xy 218.44 81.28) (xy 218.44 90.17)) + (stroke (width 0) (type default)) + (uuid 723939a1-81a1-432a-b494-0491488c41c2) + ) + (wire (pts (xy 245.11 134.62) (xy 130.81 134.62)) + (stroke (width 0) (type default)) + (uuid 73e6a103-d702-4daa-848a-3d8cb790ca5b) + ) + (wire (pts (xy 102.87 91.44) (xy 110.49 91.44)) + (stroke (width 0) (type default)) + (uuid 7aaab007-f079-408f-9a58-56b5e6c15e7f) + ) + (wire (pts (xy 219.71 46.99) (xy 219.71 48.26)) + (stroke (width 0) (type default)) + (uuid 7d202f4b-6ae7-41ba-bbf8-91ee9ae9bf11) + ) + (wire (pts (xy 182.88 33.02) (xy 182.88 34.29)) + (stroke (width 0) (type default)) + (uuid 7fced63a-ef46-42a2-bfa8-88d2d300a113) + ) + (wire (pts (xy 176.53 34.29) (xy 176.53 33.02)) + (stroke (width 0) (type default)) + (uuid 811fe4ae-4d9e-491d-b0e8-8933950cb5be) + ) + (wire (pts (xy 236.22 45.72) (xy 236.22 44.45)) + (stroke (width 0) (type default)) + (uuid 839939a7-f516-4162-9624-10f055b5a228) + ) + (wire (pts (xy 259.08 67.31) (xy 261.62 67.31)) + (stroke (width 0) (type default)) + (uuid 846985e7-c6f1-450f-8a62-94532b5372ec) + ) + (wire (pts (xy 236.22 44.45) (xy 246.38 44.45)) + (stroke (width 0) (type default)) + (uuid 86addab7-132f-451a-ab53-d65534d1607e) + ) + (wire (pts (xy 160.02 57.15) (xy 160.02 63.5)) + (stroke (width 0) (type default)) + (uuid 86dc9426-5d58-4a4d-9256-16c899f4d11c) + ) + (wire (pts (xy 64.77 48.26) (xy 69.85 48.26)) + (stroke (width 0) (type default)) + (uuid 86e24455-dfec-433f-80dc-c39fde419c1e) + ) + (wire (pts (xy 219.71 96.52) (xy 256.54 96.52)) + (stroke (width 0) (type default)) + (uuid 8856110e-3a32-4b3d-953a-25572067de24) + ) + (wire (pts (xy 128.27 54.61) (xy 128.27 55.88)) + (stroke (width 0) (type default)) + (uuid 8875669a-09fd-49e3-834b-fb79775a5152) + ) + (wire (pts (xy 41.91 34.29) (xy 41.91 35.56)) + (stroke (width 0) (type default)) + (uuid 889851f8-9f91-4273-973a-f59b39f0400a) + ) + (wire (pts (xy 190.5 33.02) (xy 190.5 35.56)) + (stroke (width 0) (type default)) + (uuid 889a9c33-d91a-4548-8507-f801bfafeeed) + ) + (wire (pts (xy 231.14 44.45) (xy 231.14 45.72)) + (stroke (width 0) (type default)) + (uuid 8f41df4a-75c5-46bc-a8c3-5d3f0148c4ec) + ) + (wire (pts (xy 124.46 102.87) (xy 128.27 102.87)) + (stroke (width 0) (type default)) + (uuid 8f6ab6b7-67bb-4706-bb66-3d55c8558431) + ) + (wire (pts (xy 64.77 57.15) (xy 64.77 58.42)) + (stroke (width 0) (type default)) + (uuid 91f76ed0-46c8-4ab3-9260-b06dd9da6255) + ) + (wire (pts (xy 254 53.34) (xy 254 54.61)) + (stroke (width 0) (type default)) + (uuid 94593297-cfb7-447c-80e6-d6a438491c21) + ) + (wire (pts (xy 105.41 45.72) (xy 110.49 45.72)) + (stroke (width 0) (type default)) + (uuid 9600660b-ecc2-4c8d-b81b-4cdb5cadd82b) + ) + (wire (pts (xy 157.48 66.04) (xy 158.75 66.04)) + (stroke (width 0) (type default)) + (uuid 96c16208-2dcf-4069-9c05-8b71bd10214b) + ) + (wire (pts (xy 120.65 46.99) (xy 120.65 45.72)) + (stroke (width 0) (type default)) + (uuid 99341930-798d-403c-9037-dd18c1735461) + ) + (wire (pts (xy 245.11 101.6) (xy 245.11 134.62)) + (stroke (width 0) (type default)) + (uuid 994cff41-56e3-4d1c-9d77-b04edd02df9c) + ) + (wire (pts (xy 259.08 66.04) (xy 251.46 66.04)) + (stroke (width 0) (type default)) + (uuid 9968e922-56e2-42b7-9cd5-b46c4327e31e) + ) + (wire (pts (xy 218.44 90.17) (xy 217.17 90.17)) + (stroke (width 0) (type default)) + (uuid 99e7c8cb-3f1b-44b4-a5de-c55f0a57bf41) + ) + (wire (pts (xy 102.87 67.31) (xy 105.41 67.31)) + (stroke (width 0) (type default)) + (uuid 9bdf28dd-1c79-4457-b9a9-d8360885126c) + ) + (wire (pts (xy 93.98 57.15) (xy 93.98 97.79)) + (stroke (width 0) (type default)) + (uuid 9c4154e7-0da3-4a59-b5bf-3ae7d91d1980) + ) + (wire (pts (xy 219.71 55.88) (xy 219.71 96.52)) + (stroke (width 0) (type default)) + (uuid 9c8407c3-7408-40f6-bb90-5ea1187f4c4f) + ) + (wire (pts (xy 128.27 102.87) (xy 128.27 104.14)) + (stroke (width 0) (type default)) + (uuid 9d98a4ab-bba2-4501-a178-3b67b9210367) + ) + (wire (pts (xy 50.8 34.29) (xy 45.72 34.29)) + (stroke (width 0) (type default)) + (uuid 9e760a6c-d6bf-4d81-9446-72f6d0889c5f) + ) + (wire (pts (xy 34.29 48.26) (xy 64.77 48.26)) + (stroke (width 0) (type default)) + (uuid 9ea442e9-907a-4d6f-815a-171f8f3da236) + ) + (wire (pts (xy 236.22 53.34) (xy 236.22 90.17)) + (stroke (width 0) (type default)) + (uuid a26cbd66-b637-4bd4-bd16-ad289cd2e14a) + ) + (wire (pts (xy 69.85 88.9) (xy 71.12 88.9)) + (stroke (width 0) (type default)) + (uuid a304f8bb-9908-43d6-b984-39aa9d3ee6a4) + ) + (wire (pts (xy 176.53 41.91) (xy 176.53 43.18)) + (stroke (width 0) (type default)) + (uuid a47dd661-1608-40c6-9128-6ce417a2d5a8) + ) + (wire (pts (xy 135.89 46.99) (xy 135.89 45.72)) + (stroke (width 0) (type default)) + (uuid a50010c8-4d90-430d-b26e-d41cba80c5f1) + ) + (wire (pts (xy 135.89 54.61) (xy 135.89 55.88)) + (stroke (width 0) (type default)) + (uuid a5913897-6157-43d7-8158-819728b6aeb7) + ) + (wire (pts (xy 176.53 33.02) (xy 171.45 33.02)) + (stroke (width 0) (type default)) + (uuid a72433ab-0bb4-44e8-828b-b404a8b0e39b) + ) + (wire (pts (xy 267.97 44.45) (xy 261.62 44.45)) + (stroke (width 0) (type default)) + (uuid a75bfeb6-637c-4399-adcc-418096170287) + ) + (wire (pts (xy 190.5 55.88) (xy 190.5 57.15)) + (stroke (width 0) (type default)) + (uuid a91be8bc-dcb5-4c37-815d-24c8afe2ef06) + ) + (wire (pts (xy 50.8 43.18) (xy 50.8 44.45)) + (stroke (width 0) (type default)) + (uuid adea4fe8-030e-4a40-990b-130d838f0e1b) + ) + (wire (pts (xy 160.02 68.58) (xy 160.02 81.28)) + (stroke (width 0) (type default)) + (uuid af0d6653-524f-4b47-ba94-95e1ca1397d2) + ) + (wire (pts (xy 231.14 53.34) (xy 231.14 66.04)) + (stroke (width 0) (type default)) + (uuid b91024ae-8c24-4862-9f88-66259bfd1ec4) + ) + (wire (pts (xy 160.02 63.5) (xy 161.29 63.5)) + (stroke (width 0) (type default)) + (uuid b9960f5e-d8b0-417b-8d79-553b888a9b56) + ) + (wire (pts (xy 45.72 34.29) (xy 45.72 59.69)) + (stroke (width 0) (type default)) + (uuid b9b1354a-f500-404d-8faa-99b174b6b775) + ) + (wire (pts (xy 92.71 91.44) (xy 91.44 91.44)) + (stroke (width 0) (type default)) + (uuid bc758ff1-d4ec-472e-a239-d970b0236044) + ) + (wire (pts (xy 57.15 34.29) (xy 64.77 34.29)) + (stroke (width 0) (type default)) + (uuid c037460b-d785-4168-9730-7c0b238c4294) + ) + (wire (pts (xy 132.08 92.71) (xy 132.08 91.44)) + (stroke (width 0) (type default)) + (uuid c0ff053d-a31a-4fbc-9421-b883cb3d23ea) + ) + (wire (pts (xy 105.41 34.29) (xy 64.77 34.29)) + (stroke (width 0) (type default)) + (uuid c16969d1-a34b-4675-8a55-ada098db33e2) + ) + (wire (pts (xy 259.08 91.44) (xy 259.08 120.65)) + (stroke (width 0) (type default)) + (uuid c1ff8341-84d9-405a-84a6-3b330bc15bb5) + ) + (wire (pts (xy 250.19 101.6) (xy 250.19 102.87)) + (stroke (width 0) (type default)) + (uuid c2b51474-800f-4239-a324-8211c5098939) + ) + (wire (pts (xy 257.81 91.44) (xy 259.08 91.44)) + (stroke (width 0) (type default)) + (uuid c39a99c3-a5ac-422e-84c4-4a79c5f7d54e) + ) + (wire (pts (xy 93.98 97.79) (xy 33.02 97.79)) + (stroke (width 0) (type default)) + (uuid c9e1b4ce-66e4-4997-b653-40b4aa9cda9f) + ) + (wire (pts (xy 57.15 43.18) (xy 57.15 44.45)) + (stroke (width 0) (type default)) + (uuid cddf18c7-aa13-49b8-86a4-8ca768e1f21d) + ) + (wire (pts (xy 261.62 67.31) (xy 261.62 120.65)) + (stroke (width 0) (type default)) + (uuid ce39b7c5-1325-423d-85cf-10c84e601fcb) + ) + (wire (pts (xy 124.46 102.87) (xy 124.46 104.14)) + (stroke (width 0) (type default)) + (uuid d3e22f79-5e96-4414-970c-2ee4f5c8be26) + ) + (wire (pts (xy 190.5 33.02) (xy 231.14 33.02)) + (stroke (width 0) (type default)) + (uuid d56d1eac-d078-4188-89cd-4d8940b87b7d) + ) + (wire (pts (xy 130.81 102.87) (xy 130.81 97.79)) + (stroke (width 0) (type default)) + (uuid d7666022-e4b6-4922-b779-dc8f9cf22fb2) + ) + (wire (pts (xy 135.89 45.72) (xy 128.27 45.72)) + (stroke (width 0) (type default)) + (uuid d8336193-0c6a-450a-b17f-44ce6e543378) + ) + (wire (pts (xy 190.5 46.99) (xy 190.5 48.26)) + (stroke (width 0) (type default)) + (uuid d99af2fa-2f1f-4e6a-aba2-df0cdf0bd9b1) + ) + (wire (pts (xy 57.15 82.55) (xy 68.58 82.55)) + (stroke (width 0) (type default)) + (uuid db6bdf21-088d-45ed-b247-b1e84568f4f9) + ) + (wire (pts (xy 105.41 45.72) (xy 105.41 46.99)) + (stroke (width 0) (type default)) + (uuid dce9db85-1114-4c42-ada6-c3ab2cd8d9a9) + ) + (wire (pts (xy 257.81 91.44) (xy 257.81 90.17)) + (stroke (width 0) (type default)) + (uuid dd2db1c4-c33f-47da-843d-a86081428bb0) + ) + (wire (pts (xy 228.6 90.17) (xy 236.22 90.17)) + (stroke (width 0) (type default)) + (uuid dd68282a-67ee-483e-a535-e430213df65a) + ) + (wire (pts (xy 157.48 63.5) (xy 160.02 63.5)) + (stroke (width 0) (type default)) + (uuid df7e9f1b-cb67-4bea-9494-6b42c1315cda) + ) + (wire (pts (xy 50.8 34.29) (xy 57.15 34.29)) + (stroke (width 0) (type default)) + (uuid e4afcd15-3492-4e27-950c-6716d62227f2) + ) + (wire (pts (xy 68.58 82.55) (xy 78.74 82.55)) + (stroke (width 0) (type default)) + (uuid e4ea914c-95b7-40e4-87b6-c3c86e72091f) + ) + (wire (pts (xy 133.35 68.58) (xy 133.35 67.31)) + (stroke (width 0) (type default)) + (uuid e757f2a8-a230-49a3-bc8a-be01199c7127) + ) + (wire (pts (xy 128.27 102.87) (xy 130.81 102.87)) + (stroke (width 0) (type default)) + (uuid e7975401-490b-485e-9359-65cbafdc65ae) + ) + (wire (pts (xy 34.29 69.85) (xy 34.29 82.55)) + (stroke (width 0) (type default)) + (uuid e93f6340-c137-49c7-a724-215524990489) + ) + (wire (pts (xy 33.02 97.79) (xy 33.02 67.31)) + (stroke (width 0) (type default)) + (uuid e9dac3d9-65f9-4c73-9cbe-cd42b1852224) + ) + (wire (pts (xy 231.14 44.45) (xy 236.22 44.45)) + (stroke (width 0) (type default)) + (uuid ef652169-5654-4f01-919b-c5b357de0f98) + ) + (wire (pts (xy 34.29 58.42) (xy 34.29 64.77)) + (stroke (width 0) (type default)) + (uuid efc8e1ee-cc00-44c1-8da9-5afc10dad8f6) + ) + (wire (pts (xy 57.15 35.56) (xy 57.15 34.29)) + (stroke (width 0) (type default)) + (uuid efd1fca6-cdf9-4187-b093-e19b7395363f) + ) + (wire (pts (xy 50.8 35.56) (xy 50.8 34.29)) + (stroke (width 0) (type default)) + (uuid f1dcdd08-7048-4841-a090-82e23b525d67) + ) + (wire (pts (xy 259.08 67.31) (xy 259.08 66.04)) + (stroke (width 0) (type default)) + (uuid f30828a0-deda-4512-a88b-15589aa85550) + ) + (wire (pts (xy 69.85 48.26) (xy 93.98 48.26)) + (stroke (width 0) (type default)) + (uuid fa79d681-e624-472b-90ca-4bceabd22b58) + ) + (wire (pts (xy 219.71 96.52) (xy 158.75 96.52)) + (stroke (width 0) (type default)) + (uuid fb380bd7-1916-4ca4-a598-0bdcac2dfaac) + ) + (wire (pts (xy 160.02 81.28) (xy 175.26 81.28)) + (stroke (width 0) (type default)) + (uuid fd4bd9f0-1ef7-4201-8732-43d3596c5ea6) + ) + (wire (pts (xy 246.38 45.72) (xy 246.38 44.45)) + (stroke (width 0) (type default)) + (uuid fdfa8463-af02-44fd-b403-438076cb6fc4) + ) + + (symbol (lib_id "Device:C") (at 128.27 50.8 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid 0074ef94-0d36-4108-8f14-b1d064783f91) + (property "Reference" "C8" (at 128.27 48.26 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Value" "0.1uF" (at 128.27 53.34 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 129.2352 54.61 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 128.27 50.8 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "2" (uuid 40a700ce-d8c6-499d-85bd-ca5185849750)) + (pin "1" (uuid 7435bd30-37e9-41a7-9e23-93385145da9e)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "C8") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Connector:Conn_01x01_Pin") (at 261.62 125.73 90) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid 02603ffc-8ef0-4551-98e5-69f3d0b5f5ed) + (property "Reference" "X2A1" (at 261.62 125.73 0) + (effects (font (size 1.27 1.27)) (justify right)) + ) + (property "Value" "Conn_01x01_Pin" (at 262.89 126.365 90) + (effects (font (size 1.27 1.27)) (justify right) hide) + ) + (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" (at 261.62 125.73 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 261.62 125.73 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "1" (uuid b0e8089c-1407-4dd7-81ad-5836b1a948f4)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "X2A1") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Device:C_Polarized") (at 50.8 39.37 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid 028b1213-6965-4c6b-88c6-99867053371d) + (property "Reference" "C14" (at 50.8 36.83 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Value" "47uF 35v" (at 45.72 41.91 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Footprint" "C47u35v:CAPPRD200W50D525H1250" (at 51.7652 43.18 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 50.8 39.37 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "2" (uuid ecc9dcf8-ef72-45a3-a036-f97d5c03b47a)) + (pin "1" (uuid adfcc31b-373b-4348-88bb-59bab5bfd258)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "C14") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Device:D") (at 261.62 49.53 270) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid 04786958-d145-4302-af4f-030967ac2a8a) + (property "Reference" "D1" (at 261.62 46.99 90) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Value" "12V" (at 261.62 52.07 90) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 261.62 49.53 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 261.62 49.53 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Sim.Device" "D" (at 261.62 49.53 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Sim.Pins" "1=K 2=A" (at 261.62 49.53 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "1" (uuid fc238e8a-f415-426b-bfb8-a60940691ec0)) + (pin "2" (uuid 051bbe09-8bdc-4779-bfa2-a3908276e774)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "D1") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "power:GND") (at 124.46 104.14 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced) + (uuid 0638dd7e-db00-45d0-ab7e-e480ad52bc71) + (property "Reference" "#PWR0106" (at 124.46 110.49 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Value" "GND" (at 124.46 109.22 0) + (effects (font (size 1.27 1.27))) + ) + (property "Footprint" "" (at 124.46 104.14 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "" (at 124.46 104.14 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "1" (uuid 1cb34798-dd6e-4100-9bc6-8d54414adf08)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "#PWR0106") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "power:GND") (at 171.45 74.93 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid 0ce31e06-d5bf-4265-8302-b0df1a209197) + (property "Reference" "#PWR0109" (at 171.45 81.28 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Value" "GND" (at 171.45 80.01 0) + (effects (font (size 1.27 1.27))) + ) + (property "Footprint" "" (at 171.45 74.93 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "" (at 171.45 74.93 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "1" (uuid 1a78a636-f0a9-45b0-8a4e-9f2c470d570c)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "#PWR0109") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "power:GND") (at 135.89 55.88 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced) + (uuid 12f01892-6ea7-495e-854d-744cf9b544bc) + (property "Reference" "#PWR0108" (at 135.89 62.23 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Value" "GND" (at 135.89 60.96 0) + (effects (font (size 1.27 1.27))) + ) + (property "Footprint" "" (at 135.89 55.88 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "" (at 135.89 55.88 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "1" (uuid 942cf78d-d279-40d4-80ca-d3ba61fd8251)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "#PWR0108") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Device:C_Polarized") (at 224.79 66.04 270) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid 225d2ae8-3230-4005-a4b4-2094ff960f52) + (property "Reference" "C4" (at 227.33 63.5 90) + (effects (font (size 1.27 1.27))) + ) + (property "Value" "47uF 63v" (at 231.14 67.31 90) + (effects (font (size 1.27 1.27))) + ) + (property "Footprint" "C47u63v:CAPPRD350W65D800H1250" (at 220.98 67.0052 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 224.79 66.04 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "2" (uuid 301a08fd-b6be-45bd-a4b3-131c4d4ae900)) + (pin "1" (uuid 330ccdc2-e319-47b7-b9da-f6a3ec507838)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "C4") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Device:R") (at 105.41 50.8 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid 22c624a2-9c69-4937-8b4e-0e03aaaaa038) + (property "Reference" "R14" (at 105.41 46.99 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Value" "2.2K" (at 105.41 54.61 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 103.632 50.8 90) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 105.41 50.8 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "2" (uuid a1358048-f4a8-46fd-b384-828214ca563a)) + (pin "1" (uuid fce8e472-b813-4a8e-9411-5e0e03bbe999)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "R14") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Device:C_Polarized") (at 93.98 53.34 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid 26f9efc1-f18f-46a4-a4e0-fd7b825b179e) + (property "Reference" "C12" (at 93.98 50.8 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Value" "47uF 35v" (at 88.9 55.88 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Footprint" "C47u35v:CAPPRD200W50D525H1250" (at 94.9452 57.15 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 93.98 53.34 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "2" (uuid 4978d725-9316-4043-8a1f-b1c9ce984c4e)) + (pin "1" (uuid 88b3b53e-f532-4bb8-82a4-d6d592645dc1)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "C12") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "power:GND") (at 190.5 57.15 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced) + (uuid 27f8adc3-3950-478b-b798-a085134eab29) + (property "Reference" "#PWR0112" (at 190.5 63.5 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Value" "GND" (at 190.5 62.23 0) + (effects (font (size 1.27 1.27))) + ) + (property "Footprint" "" (at 190.5 57.15 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "" (at 190.5 57.15 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "1" (uuid 15910eea-dab8-4e08-897a-116a0d158e23)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "#PWR0112") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Device:R") (at 179.07 81.28 90) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid 333c6bef-4cf7-4319-b480-a4d554049f1a) + (property "Reference" "R9" (at 175.26 82.55 90) + (effects (font (size 1.27 1.27))) + ) + (property "Value" "2.2K" (at 184.15 82.55 90) + (effects (font (size 1.27 1.27))) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 179.07 83.058 90) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 179.07 81.28 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "2" (uuid 70759d1c-be29-4c5c-8809-98315f1c5ab1)) + (pin "1" (uuid e877352c-a598-4129-b31b-d17acebc6954)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "R9") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Device:C_Polarized") (at 99.06 67.31 270) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid 388d7ed8-52d9-442b-b762-60006c60c529) + (property "Reference" "C11" (at 101.6 64.77 90) + (effects (font (size 1.27 1.27))) + ) + (property "Value" "47uF 63v" (at 105.41 68.58 90) + (effects (font (size 1.27 1.27))) + ) + (property "Footprint" "C47u63v:CAPPRD350W65D800H1250" (at 95.25 68.2752 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 99.06 67.31 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "2" (uuid 51a481e5-83de-40ff-89b7-dfc4eae21bc2)) + (pin "1" (uuid 89572e0b-9d69-46f6-8e01-4ad6452bc3f7)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "C11") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Connector_Generic:Conn_01x01") (at 26.67 85.09 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced) + (uuid 38fe0de6-7d2f-4f1f-80d5-5bc0704f2c9a) + (property "Reference" "J1" (at 29.21 83.82 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Value" "Conn_01x01" (at 29.21 86.36 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Footprint" "" (at 26.67 85.09 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 26.67 85.09 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "1" (uuid 67cc4a14-d1b6-4462-bcdc-06d9ed4be212)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "J1") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Device:R") (at 121.92 91.44 90) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid 4281c715-bfa5-4c1d-833f-007ae19a4629) + (property "Reference" "R11" (at 118.11 92.71 90) + (effects (font (size 1.27 1.27))) + ) + (property "Value" "47" (at 125.73 92.71 90) + (effects (font (size 1.27 1.27))) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 121.92 93.218 90) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 121.92 91.44 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "2" (uuid 6faefed0-61f7-4fd8-8ccb-07f56d270344)) + (pin "1" (uuid 4db49fe1-988c-4207-bdeb-2ca6e8d955f4)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "R11") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "power:Earth") (at 182.88 43.18 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced) + (uuid 42e49b7c-ab92-43e4-8f7c-3d91038226a9) + (property "Reference" "#PWR0111" (at 182.88 49.53 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Value" "Earth" (at 182.88 46.99 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Footprint" "" (at 182.88 43.18 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 182.88 43.18 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "1" (uuid b363b289-7b34-4a27-8f0d-4b981c713ce6)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "#PWR0111") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Device:R") (at 247.65 90.17 90) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid 465be87b-5590-4da0-9122-4e5009c124ff) + (property "Reference" "R1" (at 243.84 91.44 90) + (effects (font (size 1.27 1.27))) + ) + (property "Value" "47" (at 251.46 91.44 90) + (effects (font (size 1.27 1.27))) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 247.65 91.948 90) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 247.65 90.17 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "2" (uuid 518371d7-430d-4ece-85c1-e014c34e5f91)) + (pin "1" (uuid 8e32f884-af0c-4f58-b1d4-dee7df354570)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "R1") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "OPA1642AID:OPA1642AID") (at 45.72 67.31 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid 46bd3898-2842-4255-93e2-77804f67ee14) + (property "Reference" "IC2" (at 49.53 64.77 0) + (effects (font (size 1.27 1.27))) + ) + (property "Value" "OPA1642AID" (at 53.34 69.85 0) + (effects (font (size 1.27 1.27))) + ) + (property "Footprint" "opa1642:SOIC127P600X175-8N" (at 45.72 67.31 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "Datasheet" "" (at 45.72 67.31 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "MF" "Texas Instruments" (at 45.72 67.31 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "MAXIMUM_PACKAGE_HEIGHT" "1.75 mm" (at 45.72 67.31 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "Package" "SOIC-8 Texas Instruments" (at 45.72 67.31 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "Price" "None" (at 45.72 67.31 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "Check_prices" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=eda" (at 45.72 67.31 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "STANDARD" "IPC 7351B" (at 45.72 67.31 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "PARTREV" "D" (at 45.72 67.31 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "SnapEDA_Link" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=snap" (at 45.72 67.31 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "MP" "OPA1642AID" (at 45.72 67.31 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "Description" "\n \n Dual SoundPlus™ high-performance, JFET-input audio op amp\n \n" (at 45.72 67.31 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "Availability" "In Stock" (at 45.72 67.31 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "MANUFACTURER" "Texas Instruments" (at 45.72 67.31 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (pin "1" (uuid f6adf7a0-f4f6-489d-aa22-16fd1d80ab13)) + (pin "7" (uuid c8f04e9e-37cd-44d0-befd-fa1c054349ed)) + (pin "4" (uuid d54d4c06-fe4e-4323-b930-98b2c1a2dba1)) + (pin "2" (uuid 76767c82-1b5b-439e-a798-ee79a4f46bba)) + (pin "6" (uuid c36582c0-b02a-453d-9f70-9abbd6fba049)) + (pin "8" (uuid 8849be4b-fb86-4bc5-a0c6-953ccb2e220e)) + (pin "3" (uuid 29daf701-3def-4826-95b5-e97a339f144a)) + (pin "5" (uuid 1c1b288a-a713-40eb-8869-436701df4af6)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "IC2") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Device:R") (at 110.49 50.8 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid 486efbe6-6d60-4f65-a28a-eac2f703a21a) + (property "Reference" "R13" (at 110.49 46.99 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Value" "2.2K" (at 110.49 54.61 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 108.712 50.8 90) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 110.49 50.8 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "2" (uuid bc0f2659-41ff-4316-90ad-7a947ab2a415)) + (pin "1" (uuid feaeb753-707d-4138-a168-f4b32dfbad00)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "R13") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Device:C_Polarized") (at 246.38 49.53 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid 4af43834-c924-4e65-939c-9334e1de4766) + (property "Reference" "C2" (at 246.38 46.99 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Value" "47uF 35v" (at 241.3 52.07 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Footprint" "C47u35v:CAPPRD200W50D525H1250" (at 247.3452 53.34 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 246.38 49.53 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "2" (uuid 647869d4-07f5-4c7f-abe2-670267baac61)) + (pin "1" (uuid 65bae4a4-9996-4268-bc65-e781d99f3f37)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "C2") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Device:C_Polarized") (at 219.71 52.07 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid 4b15cc8f-884d-43ed-8a34-09c6b829c7ae) + (property "Reference" "C5" (at 219.71 49.53 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Value" "47uF 35v" (at 214.63 54.61 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Footprint" "C47u35v:CAPPRD200W50D525H1250" (at 220.6752 55.88 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 219.71 52.07 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "2" (uuid 525fdf3a-5064-41df-a1da-296395c40b65)) + (pin "1" (uuid 7f9c78b5-f669-4314-abbc-4dd36132e90c)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "C5") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Device:R") (at 82.55 82.55 90) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid 4dfa4bfd-4e46-43b4-9020-c77e950185e1) + (property "Reference" "R16" (at 82.55 80.01 90) + (effects (font (size 1.27 1.27))) + ) + (property "Value" "2.2K" (at 82.55 85.09 90) + (effects (font (size 1.27 1.27))) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 82.55 84.328 90) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 82.55 82.55 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "2" (uuid 7d35210b-3864-4e01-beca-84275481542d)) + (pin "1" (uuid b795f1c6-d889-4b77-937f-8d4fed456b68)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "R16") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "power:Earth") (at 50.8 44.45 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced) + (uuid 55496943-3d08-49df-8e72-559ad6363ff2) + (property "Reference" "#PWR0102" (at 50.8 50.8 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Value" "Earth" (at 50.8 48.26 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Footprint" "" (at 50.8 44.45 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 50.8 44.45 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "1" (uuid a0107957-0ab7-4f4b-b471-781945bc510d)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "#PWR0102") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Device:C") (at 182.88 38.1 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid 57c290cf-4a3a-4689-a5cc-79dd666271df) + (property "Reference" "C6" (at 182.88 35.56 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Value" "0.1uF" (at 182.88 40.64 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Footprint" "C.022uF50v:K223K15X7RF5UL2" (at 183.8452 41.91 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 182.88 38.1 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "2" (uuid ace7e3a0-e0a8-4d53-aed7-f73bbc2ba9ac)) + (pin "1" (uuid 7875c3ce-ca93-43d1-a530-cfb1c2e4f9b4)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "C6") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Connector:Conn_01x01_Pin") (at 25.4 64.77 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid 5927db5e-0de5-4020-a1e2-d3c795f23f3a) + (property "Reference" "SGNL_B1" (at 25.4 64.77 0) + (effects (font (size 1.27 1.27)) (justify right)) + ) + (property "Value" "Conn_01x01_Pin" (at 24.765 66.04 90) + (effects (font (size 1.27 1.27)) (justify right) hide) + ) + (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" (at 25.4 64.77 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 25.4 64.77 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "1" (uuid 1f5986a4-36e7-4342-892f-caed098ad8ac)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "SGNL_B1") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "power:Earth") (at 176.53 43.18 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced) + (uuid 5eef0969-7988-4f2f-b554-6f3c5c35fdaf) + (property "Reference" "#PWR0110" (at 176.53 49.53 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Value" "Earth" (at 176.53 46.99 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Footprint" "" (at 176.53 43.18 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 176.53 43.18 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "1" (uuid 02e52f50-c25e-43df-a972-8981bec33971)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "#PWR0110") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Device:D") (at 135.89 50.8 270) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid 60bb60f7-d540-494b-9a5e-5a737fa70d44) + (property "Reference" "D2" (at 135.89 48.26 90) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Value" "12V" (at 135.89 53.34 90) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 135.89 50.8 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 135.89 50.8 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Sim.Device" "D" (at 135.89 50.8 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Sim.Pins" "1=K 2=A" (at 135.89 50.8 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "1" (uuid 48fffc35-69ad-407d-8ac5-a48aaef81aaa)) + (pin "2" (uuid 6d04fede-95df-4e99-9581-c968c34a51b8)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "D2") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Device:R") (at 34.29 54.61 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid 621df7af-eee1-4ba7-b334-c8f75f6a97e7) + (property "Reference" "R20" (at 34.29 50.8 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Value" "1G" (at 34.29 58.42 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Footprint" "R1Go:RESAD1650W70L650D250" (at 32.512 54.61 90) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 34.29 54.61 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "2" (uuid 37367294-eb12-4385-8a7d-d76663413377)) + (pin "1" (uuid adbf79fc-38fb-453c-9ec4-dcfac1a233ec)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "R20") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "power:GND") (at 64.77 58.42 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced) + (uuid 63c7cdab-6e11-4929-be9e-27ccae01fe37) + (property "Reference" "#PWR0104" (at 64.77 64.77 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Value" "GND" (at 64.77 63.5 0) + (effects (font (size 1.27 1.27))) + ) + (property "Footprint" "" (at 64.77 58.42 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "" (at 64.77 58.42 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "1" (uuid c98fc743-875d-40d3-93ae-0d4889cfef40)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "#PWR0104") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Connector:Conn_01x01_Pin") (at 128.27 109.22 90) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid 64e688e4-4221-4813-bb3e-a93bb87dbbc0) + (property "Reference" "GND_T2" (at 128.27 109.22 0) + (effects (font (size 1.27 1.27)) (justify right)) + ) + (property "Value" "Conn_01x01_Pin" (at 129.54 109.855 90) + (effects (font (size 1.27 1.27)) (justify right) hide) + ) + (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" (at 128.27 109.22 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 128.27 109.22 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "1" (uuid 92d01587-a830-495c-834d-8598d13fa0bc)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "GND_T2") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Connector:Conn_01x01_Pin") (at 142.24 52.07 90) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid 6778b725-cc7e-4fa7-8d8b-1f47e2db759c) + (property "Reference" "VCC_B1" (at 142.24 52.07 0) + (effects (font (size 1.27 1.27)) (justify right)) + ) + (property "Value" "Conn_01x01_Pin" (at 143.51 52.705 90) + (effects (font (size 1.27 1.27)) (justify right) hide) + ) + (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" (at 142.24 52.07 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 142.24 52.07 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "1" (uuid 743b3ee1-c27b-44f5-9b84-fc078bb4ae34)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "VCC_B1") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "power:Earth") (at 57.15 44.45 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced) + (uuid 68e3abc2-7a79-4ae5-adaf-6dd4d34703e8) + (property "Reference" "#PWR0103" (at 57.15 50.8 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Value" "Earth" (at 57.15 48.26 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Footprint" "" (at 57.15 44.45 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 57.15 44.45 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "1" (uuid 0cde865c-71f3-4a0d-876e-14769de2d823)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "#PWR0103") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Device:R") (at 53.34 82.55 90) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid 6a141024-0740-4682-ac78-fa29ac380bd3) + (property "Reference" "R19" (at 49.53 83.82 90) + (effects (font (size 1.27 1.27))) + ) + (property "Value" "2.2K" (at 58.42 83.82 90) + (effects (font (size 1.27 1.27))) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 53.34 84.328 90) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 53.34 82.55 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "2" (uuid 57ab3927-126d-4bcb-b960-d87e99dac8f6)) + (pin "1" (uuid 8b59cb1e-3efe-4123-946e-88111aaeec9a)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "R19") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Device:R") (at 190.5 39.37 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid 6bc81894-9db7-4be7-a876-2de954b2e8d4) + (property "Reference" "R8" (at 190.5 35.56 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Value" "47K" (at 190.5 43.18 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 188.722 39.37 90) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 190.5 39.37 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "2" (uuid f6fd3a46-9bd3-4b6f-90c5-12f4fdc83af9)) + (pin "1" (uuid f7e0c90e-3c47-4d51-98ea-1a1c1bcebdf5)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "R8") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Connector:Conn_01x01_Pin") (at 41.91 40.64 90) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid 6e74e034-da91-4106-b8de-7f1079a017da) + (property "Reference" "VCC_B2" (at 41.91 40.64 0) + (effects (font (size 1.27 1.27)) (justify right)) + ) + (property "Value" "Conn_01x01_Pin" (at 43.18 41.275 90) + (effects (font (size 1.27 1.27)) (justify right) hide) + ) + (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" (at 41.91 40.64 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 41.91 40.64 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "1" (uuid 8a6f6c2d-76de-4ed7-9b45-ed1e73bbcf25)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "VCC_B2") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Connector:Conn_01x01_Pin") (at 267.97 50.8 90) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid 7056a7e2-eebb-4df3-8f54-dadb45bfed44) + (property "Reference" "VCC_A1" (at 267.97 50.8 0) + (effects (font (size 1.27 1.27)) (justify right)) + ) + (property "Value" "Conn_01x01_Pin" (at 269.24 51.435 90) + (effects (font (size 1.27 1.27)) (justify right) hide) + ) + (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" (at 267.97 50.8 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 267.97 50.8 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "1" (uuid fe39015c-d0fe-44f1-a61c-5dd362f67ab6)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "VCC_A1") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Device:R") (at 231.14 39.37 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid 7f13f25b-68e1-44e1-992e-6e69c71b1400) + (property "Reference" "R5" (at 231.14 35.56 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Value" "200" (at 231.14 43.18 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 229.362 39.37 90) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 231.14 39.37 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "2" (uuid 723218d0-30ba-4d7d-b4ad-dcaf19ce4da5)) + (pin "1" (uuid 0c84d6f8-f220-44e8-a38e-cbe00dda0ac3)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "R5") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Device:R") (at 231.14 49.53 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid 831a82f3-bee1-4a20-9f0c-de8891a80b24) + (property "Reference" "R4" (at 231.14 45.72 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Value" "2.2K" (at 231.14 53.34 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 229.362 49.53 90) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 231.14 49.53 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "2" (uuid 24ce802d-7dfa-4097-a649-d24b888ef91b)) + (pin "1" (uuid 4ed7e121-3441-41dc-bdf1-ce3e7760743d)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "R4") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Device:C") (at 254 49.53 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid 85f8809e-e152-4de2-87ff-91f95cdc3dd3) + (property "Reference" "C1" (at 254 46.99 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Value" "0.1uF" (at 254 52.07 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 254.9652 53.34 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 254 49.53 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "2" (uuid b7ea7844-17c6-4c08-bf47-43522e085528)) + (pin "1" (uuid 07c5af00-f156-4fd3-8ba9-83534d940a6d)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "C1") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Connector:Conn_01x01_Pin") (at 152.4 63.5 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid 8a06125c-2a98-42e5-987b-f3b86e05fdf0) + (property "Reference" "SGNL_A1" (at 152.4 63.5 0) + (effects (font (size 1.27 1.27)) (justify right)) + ) + (property "Value" "Conn_01x01_Pin" (at 151.765 64.77 90) + (effects (font (size 1.27 1.27)) (justify right) hide) + ) + (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" (at 152.4 63.5 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 152.4 63.5 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "1" (uuid dc757226-c32d-437b-8181-dc9c7ef42847)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "SGNL_A1") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Device:R") (at 64.77 53.34 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid 8a64f8ab-cec7-4969-9401-c34ade5f0cb5) + (property "Reference" "R17" (at 64.77 49.53 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Value" "47K" (at 64.77 57.15 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 62.992 53.34 90) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 64.77 53.34 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "2" (uuid 56b00a3a-50d5-44ba-8e34-e5b658887ba0)) + (pin "1" (uuid 84750aa7-df07-4ba8-a9a5-3927fa32b3c2)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "R17") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "OPA1642AID:OPA1642AID") (at 171.45 66.04 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid 8d506b1e-5a87-423a-8d59-2dff832fadc9) + (property "Reference" "IC1" (at 175.26 63.5 0) + (effects (font (size 1.27 1.27))) + ) + (property "Value" "OPA1642AID" (at 179.07 68.58 0) + (effects (font (size 1.27 1.27))) + ) + (property "Footprint" "opa1642:SOIC127P600X175-8N" (at 171.45 66.04 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "Datasheet" "" (at 171.45 66.04 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "MF" "Texas Instruments" (at 171.45 66.04 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "MAXIMUM_PACKAGE_HEIGHT" "1.75 mm" (at 171.45 66.04 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "Package" "SOIC-8 Texas Instruments" (at 171.45 66.04 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "Price" "None" (at 171.45 66.04 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "Check_prices" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=eda" (at 171.45 66.04 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "STANDARD" "IPC 7351B" (at 171.45 66.04 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "PARTREV" "D" (at 171.45 66.04 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "SnapEDA_Link" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=snap" (at 171.45 66.04 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "MP" "OPA1642AID" (at 171.45 66.04 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "Description" "\n \n Dual SoundPlus™ high-performance, JFET-input audio op amp\n \n" (at 171.45 66.04 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "Availability" "In Stock" (at 171.45 66.04 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "MANUFACTURER" "Texas Instruments" (at 171.45 66.04 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (pin "1" (uuid 3df379a1-e2db-4012-b7f4-e03ddff491f4)) + (pin "7" (uuid c8f04e9e-37cd-44d0-befd-fa1c054349ee)) + (pin "4" (uuid 651337f9-8ba0-4fb4-a19a-5b2153e21a46)) + (pin "2" (uuid ffee3cea-43a3-4548-959e-f592c529c82d)) + (pin "6" (uuid c36582c0-b02a-453d-9f70-9abbd6fba04a)) + (pin "8" (uuid 6e9185ff-d89f-45cd-881a-ae7bd73c8482)) + (pin "3" (uuid 2b4ed616-8377-450b-a166-514a2dceb365)) + (pin "5" (uuid 1c1b288a-a713-40eb-8869-436701df4af7)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "IC1") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Device:R") (at 190.5 52.07 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid 9073f975-3395-426e-a26b-e4f39deda04a) + (property "Reference" "R7" (at 190.5 48.26 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Value" "47K" (at 190.5 55.88 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 188.722 52.07 90) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 190.5 52.07 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "2" (uuid f0c9e713-d820-482b-9034-493d59e5d602)) + (pin "1" (uuid b724afc6-2e72-4c95-8481-b7e672131d32)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "R7") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Device:C_Polarized") (at 99.06 91.44 270) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid 90b176ff-c759-4172-98d6-a482a71dc515) + (property "Reference" "C10" (at 101.6 88.9 90) + (effects (font (size 1.27 1.27))) + ) + (property "Value" "47uF 63v" (at 105.41 92.71 90) + (effects (font (size 1.27 1.27))) + ) + (property "Footprint" "C47u63v:CAPPRD350W65D800H1250" (at 95.25 92.4052 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 99.06 91.44 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "2" (uuid f1b69faa-bead-4c39-bc09-4ced25f2253d)) + (pin "1" (uuid 65dc8b05-7f72-46e6-a78b-a3bc00e18890)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "C10") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "power:GND") (at 261.62 54.61 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced) + (uuid 94e815d1-ccba-4300-acdb-411e86c0272d) + (property "Reference" "#PWR0116" (at 261.62 60.96 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Value" "GND" (at 261.62 59.69 0) + (effects (font (size 1.27 1.27))) + ) + (property "Footprint" "" (at 261.62 54.61 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "" (at 261.62 54.61 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "1" (uuid 60bc8531-cbca-4d52-a219-177c287740b9)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "#PWR0116") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Connector:Conn_01x01_Pin") (at 25.4 67.31 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid 989fc3e9-94aa-4ae0-8fd0-530b54bc7c6a) + (property "Reference" "GND_B1" (at 25.4 67.31 0) + (effects (font (size 1.27 1.27)) (justify right)) + ) + (property "Value" "Conn_01x01_Pin" (at 24.765 68.58 90) + (effects (font (size 1.27 1.27)) (justify right) hide) + ) + (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" (at 25.4 67.31 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 25.4 67.31 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "1" (uuid ebb67577-81cb-402a-a479-e6b69b6a2a4c)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "GND_B1") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Device:R") (at 121.92 67.31 90) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid 9a83ce8c-c4ea-4707-8978-a44f631e4fc0) + (property "Reference" "R12" (at 118.11 68.58 90) + (effects (font (size 1.27 1.27))) + ) + (property "Value" "47" (at 125.73 68.58 90) + (effects (font (size 1.27 1.27))) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 121.92 69.088 90) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 121.92 67.31 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "2" (uuid 29c69a30-72c3-4c8e-853b-16a0d81d7ab7)) + (pin "1" (uuid 03ca679f-145d-4409-b8c3-fb649159ea82)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "R12") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Connector:Conn_01x01_Pin") (at 135.89 127 90) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid 9e00ee5d-3600-4941-9f50-ffa5b59f36da) + (property "Reference" "X2B1" (at 135.89 127 0) + (effects (font (size 1.27 1.27)) (justify right)) + ) + (property "Value" "Conn_01x01_Pin" (at 137.16 127.635 90) + (effects (font (size 1.27 1.27)) (justify right) hide) + ) + (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" (at 135.89 127 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 135.89 127 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "1" (uuid f6197fba-036d-47cd-8ff2-bcb89febeb1e)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "X2B1") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "power:GND") (at 246.38 54.61 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced) + (uuid 9ef2a4b2-dd03-4616-8256-be478fd95499) + (property "Reference" "#PWR0113" (at 246.38 60.96 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Value" "GND" (at 246.38 59.69 0) + (effects (font (size 1.27 1.27))) + ) + (property "Footprint" "" (at 246.38 54.61 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "" (at 246.38 54.61 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "1" (uuid 9ddd2182-efff-4095-8aea-063efb3c9f4c)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "#PWR0113") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Device:R") (at 208.28 81.28 90) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid a10f13f8-a81d-4f2b-b313-a7028981413d) + (property "Reference" "R6" (at 204.47 82.55 90) + (effects (font (size 1.27 1.27))) + ) + (property "Value" "2.2K" (at 213.36 82.55 90) + (effects (font (size 1.27 1.27))) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 208.28 83.058 90) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 208.28 81.28 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "2" (uuid e56fb348-0eed-4724-8374-d5ed289135fc)) + (pin "1" (uuid 2dc2e58e-bc13-43b6-aacc-05e583e6b221)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "R6") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Device:R") (at 160.02 53.34 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid a3724ff5-8cb6-46d0-b421-63da8a253dc7) + (property "Reference" "R10" (at 160.02 49.53 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Value" "1G" (at 160.02 57.15 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Footprint" "R1Go:RESAD1650W70L650D250" (at 158.242 53.34 90) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 160.02 53.34 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "2" (uuid 6cf9d0d0-dcc0-4e99-8d52-6d40b2b7c1ac)) + (pin "1" (uuid d97e47c4-78d6-4cb3-aec2-ef357ac9254f)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "R10") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "OPA1642AID:OPA1642AID") (at 207.01 90.17 0) (mirror x) (unit 2) + (in_bom yes) (on_board yes) (dnp no) + (uuid adb405c9-094f-4a77-a219-d4048679141c) + (property "Reference" "IC1" (at 208.28 86.36 0) + (effects (font (size 1.27 1.27))) + ) + (property "Value" "OPA1642AID" (at 212.09 93.98 0) + (effects (font (size 1.27 1.27))) + ) + (property "Footprint" "opa1642:SOIC127P600X175-8N" (at 207.01 90.17 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "Datasheet" "" (at 207.01 90.17 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "MF" "Texas Instruments" (at 207.01 90.17 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "MAXIMUM_PACKAGE_HEIGHT" "1.75 mm" (at 207.01 90.17 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "Package" "SOIC-8 Texas Instruments" (at 207.01 90.17 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "Price" "None" (at 207.01 90.17 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "Check_prices" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=eda" (at 207.01 90.17 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "STANDARD" "IPC 7351B" (at 207.01 90.17 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "PARTREV" "D" (at 207.01 90.17 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "SnapEDA_Link" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=snap" (at 207.01 90.17 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "MP" "OPA1642AID" (at 207.01 90.17 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "Description" "\n \n Dual SoundPlus™ high-performance, JFET-input audio op amp\n \n" (at 207.01 90.17 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "Availability" "In Stock" (at 207.01 90.17 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "MANUFACTURER" "Texas Instruments" (at 207.01 90.17 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (pin "1" (uuid 8eb7a723-ff49-4e64-bcff-d54dedebf6de)) + (pin "7" (uuid 05d5304f-1ed3-4e59-a514-76c851c09ee5)) + (pin "4" (uuid 5ea9edc8-d7e5-498d-a5e1-f4d8f0e59841)) + (pin "2" (uuid 223a6f4e-dc79-479d-8844-0b96b300e0c6)) + (pin "6" (uuid 476b9f2a-7339-4832-a12b-b9f0e4788b29)) + (pin "8" (uuid 30ff56b3-f2da-4beb-89d7-da61228bd144)) + (pin "3" (uuid bf170eff-2b68-464c-8e53-81064b7f76b1)) + (pin "5" (uuid 5a08e4c8-6a5e-47fb-957b-3a799787a7e7)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "IC1") (unit 2) + ) + ) + ) + ) + + (symbol (lib_id "power:GND") (at 120.65 55.88 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced) + (uuid b298509f-d04e-48de-bbad-f0bcbab3a04f) + (property "Reference" "#PWR0105" (at 120.65 62.23 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Value" "GND" (at 120.65 60.96 0) + (effects (font (size 1.27 1.27))) + ) + (property "Footprint" "" (at 120.65 55.88 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "" (at 120.65 55.88 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "1" (uuid e2867602-0acc-44af-823e-6d73343203c4)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "#PWR0105") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Device:C") (at 57.15 39.37 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid b34f1ed3-ca84-4b39-accd-7cbb7c08ede6) + (property "Reference" "C13" (at 57.15 36.83 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Value" "0.1uF" (at 57.15 41.91 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 58.1152 43.18 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 57.15 39.37 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "2" (uuid 08381df4-f68a-4b02-838a-e33bc5db6181)) + (pin "1" (uuid f9c91b11-1320-43ce-a281-800009a799b3)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "C13") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Device:C_Polarized") (at 224.79 90.17 270) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid b794b8cc-7dca-48f0-a5b9-9fe56f5cb9c1) + (property "Reference" "C3" (at 227.33 87.63 90) + (effects (font (size 1.27 1.27))) + ) + (property "Value" "47uF 63v" (at 231.14 91.44 90) + (effects (font (size 1.27 1.27))) + ) + (property "Footprint" "C47u63v:CAPPRD350W65D800H1250" (at 220.98 91.1352 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 224.79 90.17 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "2" (uuid 660c13ef-ecb7-4c3d-86fd-115e4d9a0c71)) + (pin "1" (uuid c590c216-8b22-4232-85fc-4f587bd02276)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "C3") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "power:GND") (at 254 54.61 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced) + (uuid b83e3479-76fc-41a1-9e65-7d4d4f852f71) + (property "Reference" "#PWR0115" (at 254 60.96 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Value" "GND" (at 254 59.69 0) + (effects (font (size 1.27 1.27))) + ) + (property "Footprint" "" (at 254 54.61 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "" (at 254 54.61 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "1" (uuid 65176011-8e4a-466d-b5eb-0012c0aa8023)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "#PWR0115") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "power:GND") (at 128.27 55.88 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced) + (uuid ba927458-14a9-4bb5-988c-8c8ee4e370d6) + (property "Reference" "#PWR0107" (at 128.27 62.23 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Value" "GND" (at 128.27 60.96 0) + (effects (font (size 1.27 1.27))) + ) + (property "Footprint" "" (at 128.27 55.88 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "" (at 128.27 55.88 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "1" (uuid b64aa85b-c13f-4d17-8d41-c3be2cbb7a2c)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "#PWR0107") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Connector:Conn_01x01_Pin") (at 167.64 39.37 90) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid c623b86b-7f7f-40b9-93e6-26635740e815) + (property "Reference" "VCC_A2" (at 167.64 39.37 0) + (effects (font (size 1.27 1.27)) (justify right)) + ) + (property "Value" "Conn_01x01_Pin" (at 168.91 40.005 90) + (effects (font (size 1.27 1.27)) (justify right) hide) + ) + (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" (at 167.64 39.37 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 167.64 39.37 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "1" (uuid 74392829-b572-4043-b75c-ce94c7303916)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "VCC_A2") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Connector:Conn_01x01_Pin") (at 254 107.95 90) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid c6463406-90eb-4918-8130-603a8949491f) + (property "Reference" "GND_T1" (at 254 107.95 0) + (effects (font (size 1.27 1.27)) (justify right)) + ) + (property "Value" "Conn_01x01_Pin" (at 255.27 108.585 90) + (effects (font (size 1.27 1.27)) (justify right) hide) + ) + (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" (at 254 107.95 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 254 107.95 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "1" (uuid dc641fdf-29e7-48f6-a8bd-98631f77428a)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "GND_T1") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Connector:Conn_01x01_Pin") (at 259.08 125.73 90) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid caa6c8b8-ee7b-44c3-a728-7e55c5ac92d4) + (property "Reference" "X3A1" (at 259.08 125.73 0) + (effects (font (size 1.27 1.27)) (justify right)) + ) + (property "Value" "Conn_01x01_Pin" (at 260.35 126.365 90) + (effects (font (size 1.27 1.27)) (justify right) hide) + ) + (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" (at 259.08 125.73 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 259.08 125.73 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "1" (uuid ddde005c-04b1-441b-8f96-405d6365ad7a)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "X3A1") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Connector:Conn_01x01_Pin") (at 133.35 127 90) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid cb6e0e92-8106-4918-9d8c-3e3013d6e7e1) + (property "Reference" "X3B1" (at 133.35 127 0) + (effects (font (size 1.27 1.27)) (justify right)) + ) + (property "Value" "Conn_01x01_Pin" (at 134.62 127.635 90) + (effects (font (size 1.27 1.27)) (justify right) hide) + ) + (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" (at 133.35 127 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 133.35 127 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "1" (uuid 83ee8894-d279-409f-872d-1bb4b54b4711)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "X3B1") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Connector:Conn_01x01_Pin") (at 130.81 140.97 90) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid cf4c5d8d-0c85-43b3-b2ab-eff2610198e1) + (property "Reference" "X1" (at 130.81 140.97 0) + (effects (font (size 1.27 1.27)) (justify right)) + ) + (property "Value" "Conn_01x01_Pin" (at 132.08 141.605 90) + (effects (font (size 1.27 1.27)) (justify right) hide) + ) + (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" (at 130.81 140.97 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 130.81 140.97 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "1" (uuid ede1e98a-7f1e-4164-9b48-4f99624e3fdb)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "X1") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Device:C_Polarized") (at 120.65 50.8 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid d1189f40-af74-4922-94ba-fe238cf5f19c) + (property "Reference" "C9" (at 120.65 48.26 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Value" "47uF 35v" (at 115.57 53.34 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Footprint" "C47u35v:CAPPRD200W50D525H1250" (at 121.6152 54.61 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 120.65 50.8 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "2" (uuid 21347f6b-880b-454c-b525-e7b32506f81a)) + (pin "1" (uuid e6fee27c-9b54-4d6a-af33-e23eae7903bd)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "C9") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "power:GND") (at 45.72 76.2 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid d2d03453-a471-47e3-b8a0-21c302ee4b55) + (property "Reference" "#PWR0101" (at 45.72 82.55 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Value" "GND" (at 45.72 81.28 0) + (effects (font (size 1.27 1.27))) + ) + (property "Footprint" "" (at 45.72 76.2 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "" (at 45.72 76.2 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "1" (uuid d5bd19b3-cf01-497e-9f3d-63ee2e537d2d)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "#PWR0101") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Connector:Conn_01x01_Pin") (at 152.4 66.04 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid dc9beee8-362a-431f-ae58-61cdcb6832dc) + (property "Reference" "GND_A1" (at 152.4 66.04 0) + (effects (font (size 1.27 1.27)) (justify right)) + ) + (property "Value" "Conn_01x01_Pin" (at 151.765 67.31 90) + (effects (font (size 1.27 1.27)) (justify right) hide) + ) + (property "Footprint" "Connector_Pin:Pin_D1.0mm_L10.0mm" (at 152.4 66.04 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 152.4 66.04 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "1" (uuid 384d9e59-0cf8-4a8b-8799-c7ed8eb90760)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "GND_A1") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Device:R") (at 64.77 40.64 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid dffbb023-66a6-4908-bab6-7170bcf5a1bb) + (property "Reference" "R18" (at 64.77 36.83 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Value" "47K" (at 64.77 44.45 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 62.992 40.64 90) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 64.77 40.64 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "2" (uuid d03037c0-1efd-4222-9884-4ef4e95956c7)) + (pin "1" (uuid 18557c98-42f0-44bd-8418-c4ad8636e6c1)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "R18") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "OPA1642AID:OPA1642AID") (at 81.28 91.44 0) (mirror x) (unit 2) + (in_bom yes) (on_board yes) (dnp no) + (uuid e46d3b5f-0bed-4df1-a7ff-7fb3e0496ac5) + (property "Reference" "IC2" (at 82.55 87.63 0) + (effects (font (size 1.27 1.27))) + ) + (property "Value" "OPA1642AID" (at 86.36 95.25 0) + (effects (font (size 1.27 1.27))) + ) + (property "Footprint" "opa1642:SOIC127P600X175-8N" (at 81.28 91.44 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "Datasheet" "" (at 81.28 91.44 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "MF" "Texas Instruments" (at 81.28 91.44 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "MAXIMUM_PACKAGE_HEIGHT" "1.75 mm" (at 81.28 91.44 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "Package" "SOIC-8 Texas Instruments" (at 81.28 91.44 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "Price" "None" (at 81.28 91.44 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "Check_prices" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=eda" (at 81.28 91.44 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "STANDARD" "IPC 7351B" (at 81.28 91.44 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "PARTREV" "D" (at 81.28 91.44 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "SnapEDA_Link" "https://www.snapeda.com/parts/OPA1642AID/Texas+Instruments/view-part/?ref=snap" (at 81.28 91.44 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "MP" "OPA1642AID" (at 81.28 91.44 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "Description" "\n \n Dual SoundPlus™ high-performance, JFET-input audio op amp\n \n" (at 81.28 91.44 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "Availability" "In Stock" (at 81.28 91.44 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (property "MANUFACTURER" "Texas Instruments" (at 81.28 91.44 0) + (effects (font (size 1.27 1.27)) (justify bottom) hide) + ) + (pin "1" (uuid 8eb7a723-ff49-4e64-bcff-d54dedebf6df)) + (pin "7" (uuid c8f04e9e-37cd-44d0-befd-fa1c054349ef)) + (pin "4" (uuid 5ea9edc8-d7e5-498d-a5e1-f4d8f0e59842)) + (pin "2" (uuid 223a6f4e-dc79-479d-8844-0b96b300e0c7)) + (pin "6" (uuid c36582c0-b02a-453d-9f70-9abbd6fba04b)) + (pin "8" (uuid 30ff56b3-f2da-4beb-89d7-da61228bd145)) + (pin "3" (uuid bf170eff-2b68-464c-8e53-81064b7f76b2)) + (pin "5" (uuid 1c1b288a-a713-40eb-8869-436701df4af8)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "IC2") (unit 2) + ) + ) + ) + ) + + (symbol (lib_id "power:GND") (at 250.19 102.87 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) (fields_autoplaced) + (uuid e53bcdf9-738a-48e4-a152-a14a08270ebd) + (property "Reference" "#PWR0114" (at 250.19 109.22 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Value" "GND" (at 250.19 107.95 0) + (effects (font (size 1.27 1.27))) + ) + (property "Footprint" "" (at 250.19 102.87 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "" (at 250.19 102.87 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "1" (uuid c624e79d-a3f3-4f3c-98ab-5bbe94e84744)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "#PWR0114") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Device:R") (at 247.65 66.04 90) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid e7bc09ca-c05b-46b5-a6ac-36183d8d76a3) + (property "Reference" "R2" (at 242.57 67.31 90) + (effects (font (size 1.27 1.27))) + ) + (property "Value" "47" (at 251.46 67.31 90) + (effects (font (size 1.27 1.27))) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 247.65 67.818 90) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 247.65 66.04 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "2" (uuid 811bcd25-7683-450d-a0f6-4cbf30fe16d7)) + (pin "1" (uuid b446f901-9264-4de1-a7f4-e94b77c4b7a7)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "R2") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Device:C_Polarized") (at 176.53 38.1 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid e99cf364-578f-476c-924e-844a1b1a8e85) + (property "Reference" "C7" (at 176.53 35.56 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Value" "47uF 35v" (at 171.45 40.64 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Footprint" "C47u35v:CAPPRD200W50D525H1250" (at 177.4952 41.91 0) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 176.53 38.1 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "2" (uuid 7fbc65c4-a622-4af7-8427-e54f1f86ba89)) + (pin "1" (uuid 02fe146f-014e-4c3e-acf4-171e7ba0e1ca)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "C7") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Device:R") (at 105.41 40.64 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid ecfd7613-45e7-4949-88b5-f33fd1e3a59e) + (property "Reference" "R15" (at 105.41 36.83 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Value" "200" (at 105.41 44.45 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 103.632 40.64 90) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 105.41 40.64 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "2" (uuid ca1d0729-2505-4402-9f17-357bcc7bb1bb)) + (pin "1" (uuid 0f86676d-62aa-41b0-b91a-cde645257906)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "R15") (unit 1) + ) + ) + ) + ) + + (symbol (lib_id "Device:R") (at 236.22 49.53 0) (unit 1) + (in_bom yes) (on_board yes) (dnp no) + (uuid f8426791-547e-42ff-b8e0-5863e33d65fa) + (property "Reference" "R3" (at 236.22 45.72 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Value" "2.2K" (at 236.22 53.34 0) + (effects (font (size 1.27 1.27)) (justify left)) + ) + (property "Footprint" "Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical" (at 234.442 49.53 90) + (effects (font (size 1.27 1.27)) hide) + ) + (property "Datasheet" "~" (at 236.22 49.53 0) + (effects (font (size 1.27 1.27)) hide) + ) + (pin "2" (uuid 316da01b-6ffd-488d-82e6-871c663cd358)) + (pin "1" (uuid cab12070-cd00-4eeb-aa04-57f317411ced)) + (instances + (project "retro" + (path "/dde26cd9-6a98-439e-b5e9-17da5761ec2e" + (reference "R3") (unit 1) + ) + ) + ) + ) + + (sheet_instances + (path "/" (page "1")) + ) +) diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/mic_preamp_pcb_prototype_p2_drc_violations.json b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/mic_preamp_pcb_prototype_p2_drc_violations.json new file mode 100644 index 0000000..fa56db3 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/mic_preamp_pcb_prototype_p2_drc_violations.json @@ -0,0 +1,522 @@ +{ + "board": "/home/senke/Documents/TG__Talas_Group/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/mic_preamp_pcb_prototype_p2.kicad_pcb", + "timestamp": "2026-04-23T23:15:43+0200", + "total_violations": 50, + "violation_counts": { + "clearance": 3, + "shorting_items": 1, + "nonmirrored_text_on_back_layer": 1, + "silk_overlap": 1, + "silk_over_copper": 3, + "lib_footprint_mismatch": 25, + "lib_footprint_issues": 15, + "silk_edge_clearance": 1 + }, + "severity_counts": { + "error": 4, + "warning": 46, + "info": 0 + }, + "violations": [ + { + "type": "clearance", + "severity": "error", + "message": "Clearance violation ( clearance 0.2000 mm; actual 0.0157 mm)", + "location": { + "x": 58.3644, + "y": 94.7814, + "unit": "mm" + } + }, + { + "type": "clearance", + "severity": "error", + "message": "Clearance violation ( clearance 0.2000 mm; actual 0.0209 mm)", + "location": { + "x": 60.095148, + "y": 92.286039, + "unit": "mm" + } + }, + { + "type": "clearance", + "severity": "error", + "message": "Clearance violation ( clearance 0.2000 mm; actual 0.1701 mm)", + "location": { + "x": 60.095148, + "y": 92.286039, + "unit": "mm" + } + }, + { + "type": "shorting_items", + "severity": "error", + "message": "Items shorting two nets (nets and GND)", + "location": { + "x": 69.789193, + "y": 153.371392, + "unit": "mm" + } + }, + { + "type": "nonmirrored_text_on_back_layer", + "severity": "warning", + "message": "Non-Mirrored text on back layer", + "location": { + "x": 72.0, + "y": 112.0, + "unit": "mm" + } + }, + { + "type": "silk_overlap", + "severity": "warning", + "message": "Silkscreen overlap", + "location": { + "x": 72.0, + "y": 155.5, + "unit": "mm" + } + }, + { + "type": "silk_over_copper", + "severity": "warning", + "message": "Silkscreen clipped by solder mask", + "location": { + "x": 72.0, + "y": 155.5, + "unit": "mm" + } + }, + { + "type": "silk_over_copper", + "severity": "warning", + "message": "Silkscreen clipped by solder mask", + "location": { + "x": 72.0, + "y": 112.0, + "unit": "mm" + } + }, + { + "type": "silk_over_copper", + "severity": "warning", + "message": "Silkscreen clipped by solder mask", + "location": { + "x": 72.1, + "y": 155.66, + "unit": "mm" + } + }, + { + "type": "lib_footprint_mismatch", + "severity": "warning", + "message": "Footprint 'R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical' does not match copy in library 'Resistor_THT'.", + "location": { + "x": 59.4, + "y": 90.12, + "unit": "mm" + } + }, + { + "type": "lib_footprint_mismatch", + "severity": "warning", + "message": "Footprint 'R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical' does not match copy in library 'Resistor_THT'.", + "location": { + "x": 64.48, + "y": 97.74, + "unit": "mm" + } + }, + { + "type": "lib_footprint_mismatch", + "severity": "warning", + "message": "Footprint 'MountingHole_2.7mm_M2.5_ISO14580' does not match copy in library 'MountingHole'.", + "location": { + "x": 57.495, + "y": 77.591, + "unit": "mm" + } + }, + { + "type": "lib_footprint_mismatch", + "severity": "warning", + "message": "Footprint 'R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical' does not match copy in library 'Resistor_THT'.", + "location": { + "x": 87.34, + "y": 128.22, + "unit": "mm" + } + }, + { + "type": "lib_footprint_mismatch", + "severity": "warning", + "message": "Footprint 'R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical' does not match copy in library 'Resistor_THT'.", + "location": { + "x": 77.18, + "y": 97.74, + "unit": "mm" + } + }, + { + "type": "lib_footprint_mismatch", + "severity": "warning", + "message": "Footprint 'R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical' does not match copy in library 'Resistor_THT'.", + "location": { + "x": 64.48, + "y": 102.82, + "unit": "mm" + } + }, + { + "type": "lib_footprint_issues", + "severity": "warning", + "message": "The footprint library 'C47u35v' was not found at '/home/senke/Documents/TG__Talas_Group/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/C47u35v.pretty'.", + "location": { + "x": 67.02, + "y": 110.44, + "unit": "mm" + } + }, + { + "type": "lib_footprint_issues", + "severity": "warning", + "message": "The footprint library 'C47u63v' was not found at '/home/senke/Documents/TG__Talas_Group/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/C47u63v.pretty'.", + "location": { + "x": 63.52, + "y": 135.84, + "unit": "mm" + } + }, + { + "type": "lib_footprint_mismatch", + "severity": "warning", + "message": "Footprint 'R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical' does not match copy in library 'Resistor_THT'.", + "location": { + "x": 61.94, + "y": 120.6, + "unit": "mm" + } + }, + { + "type": "lib_footprint_issues", + "severity": "warning", + "message": "The footprint library 'C47u35v' was not found at '/home/senke/Documents/TG__Talas_Group/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/C47u35v.pretty'.", + "location": { + "x": 67.02, + "y": 125.68, + "unit": "mm" + } + }, + { + "type": "lib_footprint_issues", + "severity": "warning", + "message": "The footprint library 'R1Go' was not found at '/home/senke/Documents/TG__Talas_Group/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/R1Go.pretty'.", + "location": { + "x": 53.69, + "y": 82.5, + "unit": "mm" + } + }, + { + "type": "lib_footprint_issues", + "severity": "warning", + "message": "The footprint library 'R1Go' was not found at '/home/senke/Documents/TG__Talas_Group/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/R1Go.pretty'.", + "location": { + "x": 74.01, + "y": 82.5, + "unit": "mm" + } + }, + { + "type": "lib_footprint_issues", + "severity": "warning", + "message": "The footprint library 'C47u63v' was not found at '/home/senke/Documents/TG__Talas_Group/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/C47u63v.pretty'.", + "location": { + "x": 77.18, + "y": 135.84, + "unit": "mm" + } + }, + { + "type": "lib_footprint_mismatch", + "severity": "warning", + "message": "Footprint 'R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical' does not match copy in library 'Resistor_THT'.", + "location": { + "x": 61.94, + "y": 128.22, + "unit": "mm" + } + }, + { + "type": "lib_footprint_mismatch", + "severity": "warning", + "message": "Footprint 'R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical' does not match copy in library 'Resistor_THT'.", + "location": { + "x": 82.26, + "y": 95.2, + "unit": "mm" + } + }, + { + "type": "lib_footprint_mismatch", + "severity": "warning", + "message": "Footprint 'R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical' does not match copy in library 'Resistor_THT'.", + "location": { + "x": 82.26, + "y": 128.22, + "unit": "mm" + } + }, + { + "type": "lib_footprint_mismatch", + "severity": "warning", + "message": "Footprint 'R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical' does not match copy in library 'Resistor_THT'.", + "location": { + "x": 82.26, + "y": 115.52, + "unit": "mm" + } + }, + { + "type": "lib_footprint_issues", + "severity": "warning", + "message": "The footprint library 'C.022uF50v' was not found at '/home/senke/Documents/TG__Talas_Group/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/C.022uF50v.pretty'.", + "location": { + "x": 84.8, + "y": 90.12, + "unit": "mm" + } + }, + { + "type": "lib_footprint_mismatch", + "severity": "warning", + "message": "Footprint 'MountingHole_2.7mm_M2.5_ISO14580' does not match copy in library 'MountingHole'.", + "location": { + "x": 86.495, + "y": 77.591, + "unit": "mm" + } + }, + { + "type": "lib_footprint_mismatch", + "severity": "warning", + "message": "Footprint 'R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical' does not match copy in library 'Resistor_THT'.", + "location": { + "x": 77.18, + "y": 102.82, + "unit": "mm" + } + }, + { + "type": "lib_footprint_mismatch", + "severity": "warning", + "message": "Footprint 'R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical' does not match copy in library 'Resistor_THT'.", + "location": { + "x": 56.86, + "y": 115.52, + "unit": "mm" + } + }, + { + "type": "lib_footprint_mismatch", + "severity": "warning", + "message": "Footprint 'R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical' does not match copy in library 'Resistor_THT'.", + "location": { + "x": 61.94, + "y": 105.36, + "unit": "mm" + } + }, + { + "type": "lib_footprint_mismatch", + "severity": "warning", + "message": "Footprint 'R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical' does not match copy in library 'Resistor_THT'.", + "location": { + "x": 61.94, + "y": 115.52, + "unit": "mm" + } + }, + { + "type": "lib_footprint_mismatch", + "severity": "warning", + "message": "Footprint 'R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical' does not match copy in library 'Resistor_THT'.", + "location": { + "x": 82.26, + "y": 105.36, + "unit": "mm" + } + }, + { + "type": "lib_footprint_mismatch", + "severity": "warning", + "message": "Footprint 'R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical' does not match copy in library 'Resistor_THT'.", + "location": { + "x": 59.4, + "y": 95.2, + "unit": "mm" + } + }, + { + "type": "lib_footprint_issues", + "severity": "warning", + "message": "The footprint library 'C47u35v' was not found at '/home/senke/Documents/TG__Talas_Group/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/C47u35v.pretty'.", + "location": { + "x": 77.18, + "y": 118.06, + "unit": "mm" + } + }, + { + "type": "lib_footprint_mismatch", + "severity": "warning", + "message": "Footprint 'R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical' does not match copy in library 'Resistor_THT'.", + "location": { + "x": 89.88, + "y": 90.12, + "unit": "mm" + } + }, + { + "type": "lib_footprint_mismatch", + "severity": "warning", + "message": "Footprint 'R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical' does not match copy in library 'Resistor_THT'.", + "location": { + "x": 87.34, + "y": 115.52, + "unit": "mm" + } + }, + { + "type": "lib_footprint_issues", + "severity": "warning", + "message": "The footprint library 'C47u63v' was not found at '/home/senke/Documents/TG__Talas_Group/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/C47u63v.pretty'.", + "location": { + "x": 63.52, + "y": 146.0, + "unit": "mm" + } + }, + { + "type": "lib_footprint_mismatch", + "severity": "warning", + "message": "Footprint 'R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical' does not match copy in library 'Resistor_THT'.", + "location": { + "x": 87.34, + "y": 120.6, + "unit": "mm" + } + }, + { + "type": "lib_footprint_mismatch", + "severity": "warning", + "message": "Footprint 'R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical' does not match copy in library 'Resistor_THT'.", + "location": { + "x": 56.86, + "y": 128.22, + "unit": "mm" + } + }, + { + "type": "lib_footprint_issues", + "severity": "warning", + "message": "The footprint library 'C47u35v' was not found at '/home/senke/Documents/TG__Talas_Group/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/C47u35v.pretty'.", + "location": { + "x": 75.18, + "y": 110.44, + "unit": "mm" + } + }, + { + "type": "lib_footprint_issues", + "severity": "warning", + "message": "The footprint library 'C47u35v' was not found at '/home/senke/Documents/TG__Talas_Group/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/C47u35v.pretty'.", + "location": { + "x": 77.18, + "y": 125.68, + "unit": "mm" + } + }, + { + "type": "lib_footprint_mismatch", + "severity": "warning", + "message": "Footprint 'R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical' does not match copy in library 'Resistor_THT'.", + "location": { + "x": 56.86, + "y": 120.6, + "unit": "mm" + } + }, + { + "type": "lib_footprint_mismatch", + "severity": "warning", + "message": "Footprint 'R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical' does not match copy in library 'Resistor_THT'.", + "location": { + "x": 54.32, + "y": 87.58, + "unit": "mm" + } + }, + { + "type": "lib_footprint_issues", + "severity": "warning", + "message": "The footprint library 'C47u63v' was not found at '/home/senke/Documents/TG__Talas_Group/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/C47u63v.pretty'.", + "location": { + "x": 77.18, + "y": 146.0, + "unit": "mm" + } + }, + { + "type": "lib_footprint_mismatch", + "severity": "warning", + "message": "Footprint 'R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical' does not match copy in library 'Resistor_THT'.", + "location": { + "x": 82.26, + "y": 120.6, + "unit": "mm" + } + }, + { + "type": "lib_footprint_issues", + "severity": "warning", + "message": "The footprint library 'C47u35v' was not found at '/home/senke/Documents/TG__Talas_Group/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/C47u35v.pretty'.", + "location": { + "x": 67.02, + "y": 118.06, + "unit": "mm" + } + }, + { + "type": "lib_footprint_issues", + "severity": "warning", + "message": "The footprint library 'opa1642' was not found at '/home/senke/Documents/TG__Talas_Group/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/opa1642.pretty'.", + "location": { + "x": 67.02, + "y": 90.12, + "unit": "mm" + } + }, + { + "type": "lib_footprint_issues", + "severity": "warning", + "message": "The footprint library 'opa1642' was not found at '/home/senke/Documents/TG__Talas_Group/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/opa1642.pretty'.", + "location": { + "x": 77.18, + "y": 90.12, + "unit": "mm" + } + }, + { + "type": "silk_edge_clearance", + "severity": "warning", + "message": "Silkscreen clipped by board edge", + "location": { + "x": 92.854855, + "y": 66.093571, + "unit": "mm" + } + } + ] +} \ No newline at end of file diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/preamp_p2_gerbers_v2_BROUILLON.zip b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/preamp_p2_gerbers_v2_BROUILLON.zip new file mode 100644 index 0000000..744bd2a Binary files /dev/null and b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/preamp_p2_gerbers_v2_BROUILLON.zip differ diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/schema_preamp_p2_2026-04-23.pdf b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/schema_preamp_p2_2026-04-23.pdf new file mode 100644 index 0000000..efa0d33 Binary files /dev/null and b/02_PRODUITS_PHYSIQUES/Microphone/Conception/mic_preamp_pcb_prototype_p2/schema_preamp_p2_2026-04-23.pdf differ diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/DIYPERKS_MICRO_USB-C_NOTES.md b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/DIYPERKS_MICRO_USB-C_NOTES.md new file mode 100644 index 0000000..6c3f62e --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/DIYPERKS_MICRO_USB-C_NOTES.md @@ -0,0 +1,129 @@ +# DIY Perks — Microphone USB-C : Notes techniques complètes + +**Source :** https://diyperks.com/project_31_high-quality-usb-c-microphone/ +**Forum :** https://forum.diyperks.com/microphones/usb-c-microphone-official-topic/ (1249 réponses, 241k vues) +**Fichiers téléchargés :** `diyperks_mic_preamp_resource_pack_v1.1.zip` → `diyperks_mic_preamp_v1.1/` +**Date de collecte :** 2026-03-31 + +--- + +## Description du projet + +Construction d'un microphone USB-C de qualité studio à coût réduit. Le projet couvre le sourcing de la capsule, la fabrication du châssis en laiton, le préamplificateur, et l'interface USB pour utilisation sur laptop ou smartphone. + +## Composants principaux (BOM) + +| Composant | Réf. | Sources | +|-----------|------|---------| +| Capsule microphone | JLI-2555 (25mm) | Micbooster (EU), JLI Electronics (US), eBay | +| Transistor JFET | J111 / J112 / J113 | eBay | +| Puce préampli | THAT1512 | eBay (attention aux contrefaçons) | +| Interface audio USB | CM108B | AliExpress (5-15€) | +| Connecteur USB-C breakout | — | Amazon | +| Tube laiton 7mm | — | Amazon, eBay | +| Tige laiton 6mm | — | Amazon, eBay | +| Tiges laiton 3mm | — | Amazon, eBay | +| Joint torique nitrile 72mm (1.5mm) | — | Amazon, eBay | +| Maille laiton | — | Amazon | +| Isolateur 15V ± | — | eBay, RS Online | +| Condensateur 2200µF 16V | Polarisé | Nichicon UFW1C222MHD1TO (DigiKey) | +| Condensateur 22µF | Non-polarisé | — | +| Gaine blindage cuivre 2mm | — | — | +| Vis M2 x 10mm et 14mm | — | — | + +## Architecture du circuit + +### Étage JFET (capsule → préampli) +- Configuration common drain recommandée +- Drain → rail positif (sans résistance) +- Source → résistance 2K2 → 0V (PAS -15V, sinon THD passe de 0,8% à 14%) +- Résistance de polarisation 10GΩ (critique pour la linéarité basse fréquence) + +### JFET recommandés (par ordre de préférence) +1. **LSK170 / LSK170A** — faible tension de pincement, excellent bruit +2. **2SK208** — « s'est avéré si bon » selon les tests communautaires +3. **J112 / J113** — alternatives viables +4. **Éviter** : 2N3819 (résultats insuffisants), J111 seul (problèmes de polarité) + +### Étage préamplificateur (THAT1512) +- Gain = (R10 + R11) / R_sélectionnée +- Ex. : R=100Ω avec R10+R11=2000 → gain 20x (26 dB) +- Omission possible de R15/R16 (sans utilité fonctionnelle) +- Entrée non-inverseuse directement à la masse +- Condensateurs de découplage : 10µF électrolytique + 0,1µF céramique +- Diodes limiteurs en parallèle du feedback (résistance 100kΩ) + +### Interface USB (CM108B) +- **Modification critique** : dessouder R13 (résistance de bias) → réduit significativement le bruit +- Supporte EEPROM externe pour config de gain +- Impédance d'entrée : 10kΩ avec condensateur DC blocking +- Alternative haut de gamme : Behringer LINE 2 USB (~20€) + +## Problèmes courants et solutions + +### Pas de son +- Vérifier polarité du JFET (connexions drain/source inversées) +- Ne pas ponter le rotary switch (sensibilité excessive) +- Essayer R=1kΩ au lieu de 5,6kΩ minimum + +### Son faible +- Sélection du JFET critique — J111 sous-performe, préférer J112/J113 +- Tension drain insuffisante (mesurer : >1V attendu sur 10Ω) +- Vérifier que la capsule est montée dans le boîtier laiton (sans boîtier = sensibilité très faible) + +### Buzz / ronflements +- Condensateurs polarisés (2200µF 16V) soudés à l'envers +- Interférence EM 50/60Hz (néoplasmes fluorescents) +- **Solution** : ajouter condensateurs bypass 0,1µF sur l'alimentation 5V +- Utiliser résistances métal film (meilleur comportement basse fréquence) + +### Interférence radio +- Problème de blindage → câble de masse de la capsule doit être connecté à la grille +- Puce THAT1512 potentiellement contrefaite + +## Améliorations communautaires + +### Projet « Varee » (mod BM800) +- Remplacement de la carte originale du Neewer BM800 +- Seulement 5 connexions filaires nécessaires +- Compatible capsules 34mm (meilleure réponse basse) +- Systèmes d'amplification : Sarah, Michelle 2, Dorit (5V à 48V) + +### Résistance 10GΩ artisanale +- Non disponible commercialement en traversant +- Alternative : résistance 10MΩ (avec perte de graves) +- Hack : graphite de crayon HB entre les connexions, ajusté en essuyant + +### Blindage +- Tresse à dessouder US (s'ouvre facilement) > tresse chinoise +- Alternative : gaine blindage cuivre tressée 2mm +- Connecter le blindage au pin masse du microphone uniquement + +## Contenu du resource pack (V1.1) + +``` +diyperks_mic_preamp_v1.1/ +├── 2n4416 transistor pinout.jpg — Brochage du transistor +├── Parts List & Stripboard Template V1.1 (print with no scaling).pdf +│ — BOM + gabarit PCB stripboard +└── V1 schematic.jpg — Schéma électrique V1 +``` + +## Pertinence pour [[TALAS_ONE]] + +| Aspect DIY Perks | Comparaison Talas | +|-------------------|-------------------| +| Capsule JLI-2555 | Même famille de capsules à électret | +| Châssis laiton artisanal | Production modulaire, réparable | +| Préampli THAT1512 sur stripboard | PCB professionnel KiCAD | +| Interface CM108B modifiée | Carte son dédiée (projet futur) | +| Alimentation USB 5V | Alimentation phantom 48V possible | +| Contrôle de gain par résistances fixes | Potentiomètre continu recommandé | + +## Liens utiles + +- Forum officiel : https://forum.diyperks.com/microphones/usb-c-microphone-official-topic/ +- Améliorations V2 : https://forum.diyperks.com/microphones/i-did-not-see-this-one-coming-ultimate-usb-c-mic-improvement/ +- Mod BM800 : https://forum.diyperks.com/microphones/neewer-bme-800-upgrade-diy-perks-style/ +- Cartes capture audio : https://forum.diyperks.com/microphones/audio-capture-card-options/ +- Instructions détaillées : https://forum.diyperks.com/microphones/clearer-instructions-the-learning-experience/ diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/diyperks_mic_preamp_resource_pack_v1.1.zip b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/diyperks_mic_preamp_resource_pack_v1.1.zip new file mode 100644 index 0000000..a7330a6 Binary files /dev/null and b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/diyperks_mic_preamp_resource_pack_v1.1.zip differ diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/diyperks_mic_preamp_v1.1/2n4416 transistor pinout.jpg b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/diyperks_mic_preamp_v1.1/2n4416 transistor pinout.jpg new file mode 100644 index 0000000..3a144e1 Binary files /dev/null and b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/diyperks_mic_preamp_v1.1/2n4416 transistor pinout.jpg differ diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/diyperks_mic_preamp_v1.1/Parts List & Stripboard Template V1.1 (print with no scaling).pdf b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/diyperks_mic_preamp_v1.1/Parts List & Stripboard Template V1.1 (print with no scaling).pdf new file mode 100644 index 0000000..eebbcaa Binary files /dev/null and b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/diyperks_mic_preamp_v1.1/Parts List & Stripboard Template V1.1 (print with no scaling).pdf differ diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/diyperks_mic_preamp_v1.1/V1 schematic.jpg b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/diyperks_mic_preamp_v1.1/V1 schematic.jpg new file mode 100644 index 0000000..05dee46 Binary files /dev/null and b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/diyperks_mic_preamp_v1.1/V1 schematic.jpg differ diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Assembly.html b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Assembly.html new file mode 100755 index 0000000..1d3a0aa --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Assembly.html @@ -0,0 +1,4414 @@ + + + + + + + Interactive BOM for KiCAD + + + + + + +

 + + + + diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/DXF/StudioMic-B_Cu.dxf b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/DXF/StudioMic-B_Cu.dxf new file mode 100755 index 0000000..aebc4b1 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/DXF/StudioMic-B_Cu.dxf @@ -0,0 +1,9214 @@ + 0 +SECTION + 2 +HEADER + 9 +$ANGBASE + 50 +0.0 + 9 +$ANGDIR + 70 +1 + 9 +$MEASUREMENT + 70 +0 + 0 +ENDSEC + 0 +SECTION + 2 +TABLES + 0 +TABLE + 2 +LTYPE + 70 +4 + 0 +LTYPE + 5 +40F + 2 +CONTINUOUS + 70 +0 + 3 +Solid line + 72 +65 + 73 +0 + 40 +0.0 + 0 +LTYPE + 5 +410 + 2 +DASHDOT + 70 +0 + 3 +Dash Dot ____ _ ____ _ + 72 +65 + 73 +4 + 40 +2.0 + 49 +1.25 + 49 +-0.25 + 49 +0.25 + 49 +-0.25 + 0 +LTYPE + 5 +411 + 2 +DASHED + 70 +0 + 3 +Dashed __ __ __ __ __ + 72 +65 + 73 +2 + 40 +0.75 + 49 +0.5 + 49 +-0.25 + 0 +LTYPE + 5 +43B + 2 +DOTTED + 70 +0 + 3 +Dotted . . . . + 72 +65 + 73 +2 + 40 +0.2 + 49 +0.0 + 49 +-0.2 + 0 +ENDTAB + 0 +TABLE + 2 +STYLE + 70 +4 + 0 +STYLE + 2 +KICAD + 70 +0 + 40 +0 + 41 +1 + 42 +1 + 50 +0 + 71 +0 + 3 +isocp.shx + 0 +STYLE + 2 +KICADB + 70 +0 + 40 +0 + 41 +1 + 42 +1 + 50 +0 + 71 +0 + 3 +isocp.shx + 0 +STYLE + 2 +KICADI + 70 +0 + 40 +0 + 41 +1 + 42 +1 + 50 +15 + 71 +0 + 3 +isocp.shx + 0 +STYLE + 2 +KICADBI + 70 +0 + 40 +0 + 41 +1 + 42 +1 + 50 +15 + 71 +0 + 3 +isocp.shx + 0 +ENDTAB + 0 +TABLE + 2 +LAYER + 70 +1 + 0 +LAYER + 2 +BLACK + 70 +0 + 62 +7 + 6 +CONTINUOUS + 0 +ENDTAB + 0 +ENDSEC + 0 +SECTION + 2 +ENTITIES +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43768 +20 +-4.05639 +11 +6.44507 +21 +-4.05863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44507 +20 +-4.05863 +11 +6.45187 +21 +-4.06226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45187 +20 +-4.06226 +11 +6.45784 +21 +-4.06716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45784 +20 +-4.06716 +11 +6.46274 +21 +-4.07313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46274 +20 +-4.07313 +11 +6.46637 +21 +-4.07993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46637 +20 +-4.07993 +11 +6.46861 +21 +-4.08732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46861 +20 +-4.08732 +11 +6.46937 +21 +-4.095 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46937 +20 +-4.095 +11 +6.46861 +21 +-4.10268 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46861 +20 +-4.10268 +11 +6.46637 +21 +-4.11007 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46637 +20 +-4.11007 +11 +6.46274 +21 +-4.11687 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46274 +20 +-4.11687 +11 +6.45784 +21 +-4.12284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45784 +20 +-4.12284 +11 +6.45187 +21 +-4.12774 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45187 +20 +-4.12774 +11 +6.44507 +21 +-4.13137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44507 +20 +-4.13137 +11 +6.43787 +21 +-4.13355 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43787 +20 +-4.13355 +11 +6.43787 +21 +-4.25645 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43787 +20 +-4.25645 +11 +6.44507 +21 +-4.25863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44507 +20 +-4.25863 +11 +6.45187 +21 +-4.26226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45187 +20 +-4.26226 +11 +6.45784 +21 +-4.26716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45784 +20 +-4.26716 +11 +6.46274 +21 +-4.27313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46274 +20 +-4.27313 +11 +6.46637 +21 +-4.27993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46637 +20 +-4.27993 +11 +6.46861 +21 +-4.28732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46861 +20 +-4.28732 +11 +6.46937 +21 +-4.295 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46937 +20 +-4.295 +11 +6.46861 +21 +-4.30268 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46861 +20 +-4.30268 +11 +6.46637 +21 +-4.31007 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46637 +20 +-4.31007 +11 +6.46274 +21 +-4.31687 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46274 +20 +-4.31687 +11 +6.45784 +21 +-4.32284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45784 +20 +-4.32284 +11 +6.45187 +21 +-4.32774 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45187 +20 +-4.32774 +11 +6.44507 +21 +-4.33137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44507 +20 +-4.33137 +11 +6.43768 +21 +-4.33361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43768 +20 +-4.33361 +11 +6.43 +21 +-4.33437 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43 +20 +-4.33437 +11 +6.42232 +21 +-4.33361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42232 +20 +-4.33361 +11 +6.41493 +21 +-4.33137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41493 +20 +-4.33137 +11 +6.40813 +21 +-4.32774 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40813 +20 +-4.32774 +11 +6.40216 +21 +-4.32284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40216 +20 +-4.32284 +11 +6.39726 +21 +-4.31687 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39726 +20 +-4.31687 +11 +6.39363 +21 +-4.31007 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39363 +20 +-4.31007 +11 +6.39139 +21 +-4.30268 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39139 +20 +-4.30268 +11 +6.39063 +21 +-4.295 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39063 +20 +-4.295 +11 +6.39139 +21 +-4.28732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39139 +20 +-4.28732 +11 +6.39363 +21 +-4.27993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39363 +20 +-4.27993 +11 +6.39726 +21 +-4.27313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39726 +20 +-4.27313 +11 +6.40216 +21 +-4.26716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40216 +20 +-4.26716 +11 +6.40813 +21 +-4.26226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40813 +20 +-4.26226 +11 +6.41493 +21 +-4.25863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41493 +20 +-4.25863 +11 +6.42213 +21 +-4.25645 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42213 +20 +-4.25645 +11 +6.42213 +21 +-4.13355 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42213 +20 +-4.13355 +11 +6.41493 +21 +-4.13137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41493 +20 +-4.13137 +11 +6.40813 +21 +-4.12774 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40813 +20 +-4.12774 +11 +6.40216 +21 +-4.12284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40216 +20 +-4.12284 +11 +6.39726 +21 +-4.11687 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39726 +20 +-4.11687 +11 +6.39363 +21 +-4.11007 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39363 +20 +-4.11007 +11 +6.39139 +21 +-4.10268 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39139 +20 +-4.10268 +11 +6.39063 +21 +-4.095 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39063 +20 +-4.095 +11 +6.39139 +21 +-4.08732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39139 +20 +-4.08732 +11 +6.39363 +21 +-4.07993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39363 +20 +-4.07993 +11 +6.39726 +21 +-4.07313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39726 +20 +-4.07313 +11 +6.40216 +21 +-4.06716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40216 +20 +-4.06716 +11 +6.40813 +21 +-4.06226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40813 +20 +-4.06226 +11 +6.41493 +21 +-4.05863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41493 +20 +-4.05863 +11 +6.42232 +21 +-4.05639 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42232 +20 +-4.05639 +11 +6.43 +21 +-4.05563 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43 +20 +-4.05563 +11 +6.43768 +21 +-4.05639 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92629 +20 +-2.23242 +11 +5.9276 +21 +-2.23257 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9276 +20 +-2.23257 +11 +5.92798 +21 +-2.23281 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92798 +20 +-2.23281 +11 +5.92842 +21 +-2.23291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92842 +20 +-2.23291 +11 +5.92945 +21 +-2.23373 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92945 +20 +-2.23373 +11 +5.93057 +21 +-2.23443 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93057 +20 +-2.23443 +11 +6.01831 +21 +-2.32217 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01831 +20 +-2.32217 +11 +6.02493 +21 +-2.31863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02493 +20 +-2.31863 +11 +6.03232 +21 +-2.31639 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03232 +20 +-2.31639 +11 +6.04 +21 +-2.31563 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04 +20 +-2.31563 +11 +6.04768 +21 +-2.31639 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04768 +20 +-2.31639 +11 +6.05507 +21 +-2.31863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05507 +20 +-2.31863 +11 +6.06187 +21 +-2.32226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06187 +20 +-2.32226 +11 +6.06784 +21 +-2.32716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06784 +20 +-2.32716 +11 +6.07274 +21 +-2.33313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07274 +20 +-2.33313 +11 +6.07637 +21 +-2.33993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07637 +20 +-2.33993 +11 +6.07861 +21 +-2.34732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07861 +20 +-2.34732 +11 +6.07937 +21 +-2.355 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07937 +20 +-2.355 +11 +6.07861 +21 +-2.36268 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07861 +20 +-2.36268 +11 +6.07637 +21 +-2.37007 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07637 +20 +-2.37007 +11 +6.07274 +21 +-2.37687 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07274 +20 +-2.37687 +11 +6.06784 +21 +-2.38284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06784 +20 +-2.38284 +11 +6.06187 +21 +-2.38774 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06187 +20 +-2.38774 +11 +6.05507 +21 +-2.39137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05507 +20 +-2.39137 +11 +6.04768 +21 +-2.39361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04768 +20 +-2.39361 +11 +6.04 +21 +-2.39437 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04 +20 +-2.39437 +11 +6.03232 +21 +-2.39361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03232 +20 +-2.39361 +11 +6.02493 +21 +-2.39137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02493 +20 +-2.39137 +11 +6.01813 +21 +-2.38774 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01813 +20 +-2.38774 +11 +6.01216 +21 +-2.38284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01216 +20 +-2.38284 +11 +6.00726 +21 +-2.37687 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00726 +20 +-2.37687 +11 +6.00363 +21 +-2.37007 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00363 +20 +-2.37007 +11 +6.00139 +21 +-2.36268 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00139 +20 +-2.36268 +11 +6.00063 +21 +-2.355 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00063 +20 +-2.355 +11 +6.00139 +21 +-2.34732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00139 +20 +-2.34732 +11 +6.00363 +21 +-2.33993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00363 +20 +-2.33993 +11 +6.00717 +21 +-2.33331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00717 +20 +-2.33331 +11 +5.92174 +21 +-2.24787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92174 +20 +-2.24787 +11 +5.57326 +21 +-2.24787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57326 +20 +-2.24787 +11 +5.52287 +21 +-2.29826 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52287 +20 +-2.29826 +11 +5.52287 +21 +-4.11674 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52287 +20 +-4.11674 +11 +5.63831 +21 +-4.23217 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63831 +20 +-4.23217 +11 +5.64493 +21 +-4.22863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64493 +20 +-4.22863 +11 +5.65232 +21 +-4.22639 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65232 +20 +-4.22639 +11 +5.66 +21 +-4.22563 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66 +20 +-4.22563 +11 +5.66768 +21 +-4.22639 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66768 +20 +-4.22639 +11 +5.67507 +21 +-4.22863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67507 +20 +-4.22863 +11 +5.68187 +21 +-4.23226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68187 +20 +-4.23226 +11 +5.68784 +21 +-4.23716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68784 +20 +-4.23716 +11 +5.69274 +21 +-4.24313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.69274 +20 +-4.24313 +11 +5.69637 +21 +-4.24993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.69637 +20 +-4.24993 +11 +5.69861 +21 +-4.25732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.69861 +20 +-4.25732 +11 +5.69937 +21 +-4.265 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.69937 +20 +-4.265 +11 +5.69861 +21 +-4.27268 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.69861 +20 +-4.27268 +11 +5.69637 +21 +-4.28007 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.69637 +20 +-4.28007 +11 +5.69274 +21 +-4.28687 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.69274 +20 +-4.28687 +11 +5.68784 +21 +-4.29284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68784 +20 +-4.29284 +11 +5.68187 +21 +-4.29774 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68187 +20 +-4.29774 +11 +5.67507 +21 +-4.30137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67507 +20 +-4.30137 +11 +5.66768 +21 +-4.30361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66768 +20 +-4.30361 +11 +5.66 +21 +-4.30437 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66 +20 +-4.30437 +11 +5.65232 +21 +-4.30361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65232 +20 +-4.30361 +11 +5.64493 +21 +-4.30137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64493 +20 +-4.30137 +11 +5.63813 +21 +-4.29774 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63813 +20 +-4.29774 +11 +5.63216 +21 +-4.29284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63216 +20 +-4.29284 +11 +5.62726 +21 +-4.28687 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62726 +20 +-4.28687 +11 +5.62363 +21 +-4.28007 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62363 +20 +-4.28007 +11 +5.62139 +21 +-4.27268 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62139 +20 +-4.27268 +11 +5.62063 +21 +-4.265 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62063 +20 +-4.265 +11 +5.62139 +21 +-4.25732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62139 +20 +-4.25732 +11 +5.62363 +21 +-4.24993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62363 +20 +-4.24993 +11 +5.62717 +21 +-4.24331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62717 +20 +-4.24331 +11 +5.50943 +21 +-4.12557 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50943 +20 +-4.12557 +11 +5.50873 +21 +-4.12445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50873 +20 +-4.12445 +11 +5.50791 +21 +-4.12342 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50791 +20 +-4.12342 +11 +5.50781 +21 +-4.12298 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50781 +20 +-4.12298 +11 +5.50757 +21 +-4.1226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50757 +20 +-4.1226 +11 +5.50742 +21 +-4.12129 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50742 +20 +-4.12129 +11 +5.50713 +21 +-4.12 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50713 +20 +-4.12 +11 +5.50713 +21 +-2.295 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50713 +20 +-2.295 +11 +5.50742 +21 +-2.29371 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50742 +20 +-2.29371 +11 +5.50757 +21 +-2.2924 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50757 +20 +-2.2924 +11 +5.50781 +21 +-2.29202 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50781 +20 +-2.29202 +11 +5.50791 +21 +-2.29158 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50791 +20 +-2.29158 +11 +5.50873 +21 +-2.29055 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50873 +20 +-2.29055 +11 +5.50943 +21 +-2.28943 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50943 +20 +-2.28943 +11 +5.56443 +21 +-2.23443 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.56443 +20 +-2.23443 +11 +5.56555 +21 +-2.23373 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.56555 +20 +-2.23373 +11 +5.56658 +21 +-2.23291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.56658 +20 +-2.23291 +11 +5.56702 +21 +-2.23281 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.56702 +20 +-2.23281 +11 +5.5674 +21 +-2.23257 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5674 +20 +-2.23257 +11 +5.56871 +21 +-2.23242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.56871 +20 +-2.23242 +11 +5.57 +21 +-2.23213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57 +20 +-2.23213 +11 +5.925 +21 +-2.23213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.925 +20 +-2.23213 +11 +5.92629 +21 +-2.23242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92861 +20 +-2.78639 +11 +5.93599 +21 +-2.78863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93599 +20 +-2.78863 +11 +5.9428 +21 +-2.79226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9428 +20 +-2.79226 +11 +5.94876 +21 +-2.79716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94876 +20 +-2.79716 +11 +5.95366 +21 +-2.80313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95366 +20 +-2.80313 +11 +5.9573 +21 +-2.80993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9573 +20 +-2.80993 +11 +5.95954 +21 +-2.81732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95954 +20 +-2.81732 +11 +5.9603 +21 +-2.825 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9603 +20 +-2.825 +11 +5.95954 +21 +-2.83268 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95954 +20 +-2.83268 +11 +5.9573 +21 +-2.84007 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9573 +20 +-2.84007 +11 +5.95366 +21 +-2.84687 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95366 +20 +-2.84687 +11 +5.94876 +21 +-2.85284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94876 +20 +-2.85284 +11 +5.9428 +21 +-2.85774 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9428 +20 +-2.85774 +11 +5.93599 +21 +-2.86137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93599 +20 +-2.86137 +11 +5.9288 +21 +-2.86355 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9288 +20 +-2.86355 +11 +5.9288 +21 +-3.21766 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9288 +20 +-3.21766 +11 +6.01025 +21 +-3.29912 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01025 +20 +-3.29912 +11 +6.01096 +21 +-3.30024 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01096 +20 +-3.30024 +11 +6.01178 +21 +-3.30127 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01178 +20 +-3.30127 +11 +6.01188 +21 +-3.3017 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01188 +20 +-3.3017 +11 +6.01212 +21 +-3.30208 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01212 +20 +-3.30208 +11 +6.01226 +21 +-3.3034 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01226 +20 +-3.3034 +11 +6.01256 +21 +-3.30468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01256 +20 +-3.30468 +11 +6.01256 +21 +-4.17532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01256 +20 +-4.17532 +11 +6.01226 +21 +-4.1766 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01226 +20 +-4.1766 +11 +6.01212 +21 +-4.17792 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01212 +20 +-4.17792 +11 +6.01188 +21 +-4.1783 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01188 +20 +-4.1783 +11 +6.01178 +21 +-4.17873 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01178 +20 +-4.17873 +11 +6.01096 +21 +-4.17976 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01096 +20 +-4.17976 +11 +6.01025 +21 +-4.18088 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01025 +20 +-4.18088 +11 +6.00283 +21 +-4.18831 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00283 +20 +-4.18831 +11 +6.00637 +21 +-4.19493 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00637 +20 +-4.19493 +11 +6.00861 +21 +-4.20232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00861 +20 +-4.20232 +11 +6.00937 +21 +-4.21 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00937 +20 +-4.21 +11 +6.00861 +21 +-4.21768 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00861 +20 +-4.21768 +11 +6.00637 +21 +-4.22507 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00637 +20 +-4.22507 +11 +6.00274 +21 +-4.23187 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00274 +20 +-4.23187 +11 +5.99784 +21 +-4.23784 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99784 +20 +-4.23784 +11 +5.99187 +21 +-4.24274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99187 +20 +-4.24274 +11 +5.98507 +21 +-4.24637 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98507 +20 +-4.24637 +11 +5.97768 +21 +-4.24861 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97768 +20 +-4.24861 +11 +5.97 +21 +-4.24937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97 +20 +-4.24937 +11 +5.96232 +21 +-4.24861 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96232 +20 +-4.24861 +11 +5.95493 +21 +-4.24637 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95493 +20 +-4.24637 +11 +5.94813 +21 +-4.24274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94813 +20 +-4.24274 +11 +5.94216 +21 +-4.23784 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94216 +20 +-4.23784 +11 +5.93726 +21 +-4.23187 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93726 +20 +-4.23187 +11 +5.93363 +21 +-4.22507 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93363 +20 +-4.22507 +11 +5.93139 +21 +-4.21768 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93139 +20 +-4.21768 +11 +5.93063 +21 +-4.21 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93063 +20 +-4.21 +11 +5.93139 +21 +-4.20232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93139 +20 +-4.20232 +11 +5.93363 +21 +-4.19493 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93363 +20 +-4.19493 +11 +5.93726 +21 +-4.18813 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93726 +20 +-4.18813 +11 +5.94216 +21 +-4.18216 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94216 +20 +-4.18216 +11 +5.94813 +21 +-4.17726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94813 +20 +-4.17726 +11 +5.95493 +21 +-4.17363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95493 +20 +-4.17363 +11 +5.96232 +21 +-4.17139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96232 +20 +-4.17139 +11 +5.97 +21 +-4.17063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97 +20 +-4.17063 +11 +5.97768 +21 +-4.17139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97768 +20 +-4.17139 +11 +5.98507 +21 +-4.17363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98507 +20 +-4.17363 +11 +5.99169 +21 +-4.17717 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99169 +20 +-4.17717 +11 +5.99681 +21 +-4.17205 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99681 +20 +-4.17205 +11 +5.99681 +21 +-3.30795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99681 +20 +-3.30795 +11 +5.91536 +21 +-3.22649 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91536 +20 +-3.22649 +11 +5.91465 +21 +-3.22537 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91465 +20 +-3.22537 +11 +5.91383 +21 +-3.22434 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91383 +20 +-3.22434 +11 +5.91373 +21 +-3.2239 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91373 +20 +-3.2239 +11 +5.91349 +21 +-3.22353 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91349 +20 +-3.22353 +11 +5.91335 +21 +-3.22221 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91335 +20 +-3.22221 +11 +5.91305 +21 +-3.22093 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91305 +20 +-3.22093 +11 +5.91305 +21 +-2.86355 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91305 +20 +-2.86355 +11 +5.90586 +21 +-2.86137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90586 +20 +-2.86137 +11 +5.89905 +21 +-2.85774 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89905 +20 +-2.85774 +11 +5.89309 +21 +-2.85284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89309 +20 +-2.85284 +11 +5.88819 +21 +-2.84687 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88819 +20 +-2.84687 +11 +5.88455 +21 +-2.84007 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88455 +20 +-2.84007 +11 +5.88231 +21 +-2.83268 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88231 +20 +-2.83268 +11 +5.88156 +21 +-2.825 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88156 +20 +-2.825 +11 +5.88231 +21 +-2.81732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88231 +20 +-2.81732 +11 +5.88455 +21 +-2.80993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88455 +20 +-2.80993 +11 +5.88819 +21 +-2.80313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88819 +20 +-2.80313 +11 +5.89309 +21 +-2.79716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89309 +20 +-2.79716 +11 +5.89905 +21 +-2.79226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89905 +20 +-2.79226 +11 +5.90586 +21 +-2.78863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90586 +20 +-2.78863 +11 +5.91324 +21 +-2.78639 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91324 +20 +-2.78639 +11 +5.92093 +21 +-2.78563 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92093 +20 +-2.78563 +11 +5.92861 +21 +-2.78639 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71768 +20 +-2.30639 +11 +5.72507 +21 +-2.30863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72507 +20 +-2.30863 +11 +5.73187 +21 +-2.31226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73187 +20 +-2.31226 +11 +5.73784 +21 +-2.31716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73784 +20 +-2.31716 +11 +5.74274 +21 +-2.32313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74274 +20 +-2.32313 +11 +5.74637 +21 +-2.32993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74637 +20 +-2.32993 +11 +5.74861 +21 +-2.33732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74861 +20 +-2.33732 +11 +5.74937 +21 +-2.345 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74937 +20 +-2.345 +11 +5.74861 +21 +-2.35268 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74861 +20 +-2.35268 +11 +5.74637 +21 +-2.36007 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74637 +20 +-2.36007 +11 +5.74274 +21 +-2.36687 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74274 +20 +-2.36687 +11 +5.73784 +21 +-2.37284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73784 +20 +-2.37284 +11 +5.73187 +21 +-2.37774 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73187 +20 +-2.37774 +11 +5.72507 +21 +-2.38137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72507 +20 +-2.38137 +11 +5.71768 +21 +-2.38361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71768 +20 +-2.38361 +11 +5.71 +21 +-2.38437 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71 +20 +-2.38437 +11 +5.70232 +21 +-2.38361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70232 +20 +-2.38361 +11 +5.69493 +21 +-2.38137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.69493 +20 +-2.38137 +11 +5.68813 +21 +-2.37774 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68813 +20 +-2.37774 +11 +5.68216 +21 +-2.37284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68216 +20 +-2.37284 +11 +5.67726 +21 +-2.36687 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67726 +20 +-2.36687 +11 +5.67363 +21 +-2.36007 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67363 +20 +-2.36007 +11 +5.67145 +21 +-2.35287 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67145 +20 +-2.35287 +11 +5.66326 +21 +-2.35287 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66326 +20 +-2.35287 +11 +5.60787 +21 +-2.40826 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60787 +20 +-2.40826 +11 +5.60787 +21 +-2.94674 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60787 +20 +-2.94674 +11 +5.73326 +21 +-3.07213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73326 +20 +-3.07213 +11 +5.78645 +21 +-3.07213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78645 +20 +-3.07213 +11 +5.78863 +21 +-3.06493 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78863 +20 +-3.06493 +11 +5.79226 +21 +-3.05813 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79226 +20 +-3.05813 +11 +5.79716 +21 +-3.05216 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79716 +20 +-3.05216 +11 +5.80313 +21 +-3.04726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80313 +20 +-3.04726 +11 +5.80993 +21 +-3.04363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80993 +20 +-3.04363 +11 +5.81732 +21 +-3.04139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81732 +20 +-3.04139 +11 +5.825 +21 +-3.04063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.825 +20 +-3.04063 +11 +5.83268 +21 +-3.04139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83268 +20 +-3.04139 +11 +5.84007 +21 +-3.04363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84007 +20 +-3.04363 +11 +5.84687 +21 +-3.04726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84687 +20 +-3.04726 +11 +5.85284 +21 +-3.05216 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85284 +20 +-3.05216 +11 +5.85774 +21 +-3.05813 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85774 +20 +-3.05813 +11 +5.86137 +21 +-3.06493 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86137 +20 +-3.06493 +11 +5.86361 +21 +-3.07232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86361 +20 +-3.07232 +11 +5.86437 +21 +-3.08 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86437 +20 +-3.08 +11 +5.86361 +21 +-3.08768 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86361 +20 +-3.08768 +11 +5.86137 +21 +-3.09507 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86137 +20 +-3.09507 +11 +5.85774 +21 +-3.10187 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85774 +20 +-3.10187 +11 +5.85284 +21 +-3.10784 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85284 +20 +-3.10784 +11 +5.84687 +21 +-3.11274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84687 +20 +-3.11274 +11 +5.84007 +21 +-3.11637 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84007 +20 +-3.11637 +11 +5.83268 +21 +-3.11861 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83268 +20 +-3.11861 +11 +5.825 +21 +-3.11937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.825 +20 +-3.11937 +11 +5.81732 +21 +-3.11861 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81732 +20 +-3.11861 +11 +5.80993 +21 +-3.11637 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80993 +20 +-3.11637 +11 +5.80313 +21 +-3.11274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80313 +20 +-3.11274 +11 +5.79716 +21 +-3.10784 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79716 +20 +-3.10784 +11 +5.79226 +21 +-3.10187 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79226 +20 +-3.10187 +11 +5.78863 +21 +-3.09507 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78863 +20 +-3.09507 +11 +5.78645 +21 +-3.08787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78645 +20 +-3.08787 +11 +5.73 +21 +-3.08787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73 +20 +-3.08787 +11 +5.72871 +21 +-3.08758 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72871 +20 +-3.08758 +11 +5.7274 +21 +-3.08743 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7274 +20 +-3.08743 +11 +5.72702 +21 +-3.08719 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72702 +20 +-3.08719 +11 +5.72658 +21 +-3.08709 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72658 +20 +-3.08709 +11 +5.72555 +21 +-3.08627 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72555 +20 +-3.08627 +11 +5.72443 +21 +-3.08557 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72443 +20 +-3.08557 +11 +5.59443 +21 +-2.95557 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59443 +20 +-2.95557 +11 +5.59373 +21 +-2.95445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59373 +20 +-2.95445 +11 +5.59291 +21 +-2.95342 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59291 +20 +-2.95342 +11 +5.59281 +21 +-2.95298 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59281 +20 +-2.95298 +11 +5.59257 +21 +-2.9526 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59257 +20 +-2.9526 +11 +5.59242 +21 +-2.95129 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59242 +20 +-2.95129 +11 +5.59213 +21 +-2.95 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59213 +20 +-2.95 +11 +5.59213 +21 +-2.405 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59213 +20 +-2.405 +11 +5.59242 +21 +-2.40371 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59242 +20 +-2.40371 +11 +5.59257 +21 +-2.4024 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59257 +20 +-2.4024 +11 +5.59281 +21 +-2.40202 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59281 +20 +-2.40202 +11 +5.59291 +21 +-2.40158 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59291 +20 +-2.40158 +11 +5.59373 +21 +-2.40055 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59373 +20 +-2.40055 +11 +5.59443 +21 +-2.39943 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59443 +20 +-2.39943 +11 +5.65443 +21 +-2.33943 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65443 +20 +-2.33943 +11 +5.65555 +21 +-2.33873 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65555 +20 +-2.33873 +11 +5.65658 +21 +-2.33791 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65658 +20 +-2.33791 +11 +5.65702 +21 +-2.33781 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65702 +20 +-2.33781 +11 +5.6574 +21 +-2.33757 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6574 +20 +-2.33757 +11 +5.65871 +21 +-2.33742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65871 +20 +-2.33742 +11 +5.66 +21 +-2.33713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66 +20 +-2.33713 +11 +5.67145 +21 +-2.33713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67145 +20 +-2.33713 +11 +5.67363 +21 +-2.32993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67363 +20 +-2.32993 +11 +5.67726 +21 +-2.32313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67726 +20 +-2.32313 +11 +5.68216 +21 +-2.31716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68216 +20 +-2.31716 +11 +5.68813 +21 +-2.31226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68813 +20 +-2.31226 +11 +5.69493 +21 +-2.30863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.69493 +20 +-2.30863 +11 +5.70232 +21 +-2.30639 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70232 +20 +-2.30639 +11 +5.71 +21 +-2.30563 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71 +20 +-2.30563 +11 +5.71768 +21 +-2.30639 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10305 +20 +-2.63176 +11 +6.11044 +21 +-2.634 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11044 +20 +-2.634 +11 +6.11725 +21 +-2.63764 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11725 +20 +-2.63764 +11 +6.12321 +21 +-2.64254 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12321 +20 +-2.64254 +11 +6.12811 +21 +-2.6485 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12811 +20 +-2.6485 +11 +6.13175 +21 +-2.65531 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13175 +20 +-2.65531 +11 +6.13399 +21 +-2.66269 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13399 +20 +-2.66269 +11 +6.13474 +21 +-2.67037 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13474 +20 +-2.67037 +11 +6.13399 +21 +-2.67805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13399 +20 +-2.67805 +11 +6.13175 +21 +-2.68544 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13175 +20 +-2.68544 +11 +6.12811 +21 +-2.69225 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12811 +20 +-2.69225 +11 +6.12321 +21 +-2.69821 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12321 +20 +-2.69821 +11 +6.11725 +21 +-2.70311 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11725 +20 +-2.70311 +11 +6.11044 +21 +-2.70675 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11044 +20 +-2.70675 +11 +6.10305 +21 +-2.70899 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10305 +20 +-2.70899 +11 +6.09537 +21 +-2.70974 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09537 +20 +-2.70974 +11 +6.08769 +21 +-2.70899 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08769 +20 +-2.70899 +11 +6.08031 +21 +-2.70675 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08031 +20 +-2.70675 +11 +6.07368 +21 +-2.7032 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07368 +20 +-2.7032 +11 +6.05787 +21 +-2.71901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05787 +20 +-2.71901 +11 +6.05787 +21 +-3.02145 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05787 +20 +-3.02145 +11 +6.06507 +21 +-3.02363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06507 +20 +-3.02363 +11 +6.07187 +21 +-3.02726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07187 +20 +-3.02726 +11 +6.07784 +21 +-3.03216 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07784 +20 +-3.03216 +11 +6.08274 +21 +-3.03813 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08274 +20 +-3.03813 +11 +6.08637 +21 +-3.04493 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08637 +20 +-3.04493 +11 +6.08861 +21 +-3.05232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08861 +20 +-3.05232 +11 +6.08937 +21 +-3.06 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08937 +20 +-3.06 +11 +6.08861 +21 +-3.06768 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08861 +20 +-3.06768 +11 +6.08637 +21 +-3.07507 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08637 +20 +-3.07507 +11 +6.08274 +21 +-3.08187 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08274 +20 +-3.08187 +11 +6.07784 +21 +-3.08784 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07784 +20 +-3.08784 +11 +6.07187 +21 +-3.09274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07187 +20 +-3.09274 +11 +6.06507 +21 +-3.09637 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06507 +20 +-3.09637 +11 +6.05768 +21 +-3.09861 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05768 +20 +-3.09861 +11 +6.05 +21 +-3.09937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05 +20 +-3.09937 +11 +6.04232 +21 +-3.09861 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04232 +20 +-3.09861 +11 +6.03493 +21 +-3.09637 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03493 +20 +-3.09637 +11 +6.02813 +21 +-3.09274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02813 +20 +-3.09274 +11 +6.02216 +21 +-3.08784 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02216 +20 +-3.08784 +11 +6.01726 +21 +-3.08187 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01726 +20 +-3.08187 +11 +6.01363 +21 +-3.07507 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01363 +20 +-3.07507 +11 +6.01139 +21 +-3.06768 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01139 +20 +-3.06768 +11 +6.01063 +21 +-3.06 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01063 +20 +-3.06 +11 +6.01139 +21 +-3.05232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01139 +20 +-3.05232 +11 +6.01363 +21 +-3.04493 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01363 +20 +-3.04493 +11 +6.01726 +21 +-3.03813 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01726 +20 +-3.03813 +11 +6.02216 +21 +-3.03216 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02216 +20 +-3.03216 +11 +6.02813 +21 +-3.02726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02813 +20 +-3.02726 +11 +6.03493 +21 +-3.02363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03493 +20 +-3.02363 +11 +6.04213 +21 +-3.02145 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04213 +20 +-3.02145 +11 +6.04213 +21 +-2.71575 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04213 +20 +-2.71575 +11 +6.04242 +21 +-2.71446 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04242 +20 +-2.71446 +11 +6.04257 +21 +-2.71315 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04257 +20 +-2.71315 +11 +6.04281 +21 +-2.71277 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04281 +20 +-2.71277 +11 +6.04291 +21 +-2.71233 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04291 +20 +-2.71233 +11 +6.04373 +21 +-2.7113 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04373 +20 +-2.7113 +11 +6.04443 +21 +-2.71018 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04443 +20 +-2.71018 +11 +6.06254 +21 +-2.69207 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06254 +20 +-2.69207 +11 +6.059 +21 +-2.68544 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.059 +20 +-2.68544 +11 +6.05676 +21 +-2.67805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05676 +20 +-2.67805 +11 +6.056 +21 +-2.67037 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.056 +20 +-2.67037 +11 +6.05676 +21 +-2.66269 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05676 +20 +-2.66269 +11 +6.059 +21 +-2.65531 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.059 +20 +-2.65531 +11 +6.06264 +21 +-2.6485 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06264 +20 +-2.6485 +11 +6.06754 +21 +-2.64254 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06754 +20 +-2.64254 +11 +6.0735 +21 +-2.63764 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0735 +20 +-2.63764 +11 +6.08031 +21 +-2.634 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08031 +20 +-2.634 +11 +6.08769 +21 +-2.63176 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08769 +20 +-2.63176 +11 +6.09537 +21 +-2.631 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09537 +20 +-2.631 +11 +6.10305 +21 +-2.63176 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23768 +20 +-2.18139 +11 +6.24507 +21 +-2.18363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24507 +20 +-2.18363 +11 +6.25187 +21 +-2.18726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25187 +20 +-2.18726 +11 +6.25784 +21 +-2.19216 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25784 +20 +-2.19216 +11 +6.26274 +21 +-2.19813 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26274 +20 +-2.19813 +11 +6.26637 +21 +-2.20493 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26637 +20 +-2.20493 +11 +6.26855 +21 +-2.21213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26855 +20 +-2.21213 +11 +6.3525 +21 +-2.21213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3525 +20 +-2.21213 +11 +6.35379 +21 +-2.21242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35379 +20 +-2.21242 +11 +6.3551 +21 +-2.21257 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3551 +20 +-2.21257 +11 +6.35548 +21 +-2.21281 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35548 +20 +-2.21281 +11 +6.35592 +21 +-2.21291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35592 +20 +-2.21291 +11 +6.35695 +21 +-2.21373 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35695 +20 +-2.21373 +11 +6.35807 +21 +-2.21443 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35807 +20 +-2.21443 +11 +6.39172 +21 +-2.24808 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39172 +20 +-2.24808 +11 +6.39732 +21 +-2.24639 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39732 +20 +-2.24639 +11 +6.405 +21 +-2.24563 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.405 +20 +-2.24563 +11 +6.41268 +21 +-2.24639 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41268 +20 +-2.24639 +11 +6.42007 +21 +-2.24863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42007 +20 +-2.24863 +11 +6.42687 +21 +-2.25226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42687 +20 +-2.25226 +11 +6.43284 +21 +-2.25716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43284 +20 +-2.25716 +11 +6.43774 +21 +-2.26313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43774 +20 +-2.26313 +11 +6.44137 +21 +-2.26993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44137 +20 +-2.26993 +11 +6.44361 +21 +-2.27732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44361 +20 +-2.27732 +11 +6.44437 +21 +-2.285 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44437 +20 +-2.285 +11 +6.44361 +21 +-2.29268 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44361 +20 +-2.29268 +11 +6.44137 +21 +-2.30007 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44137 +20 +-2.30007 +11 +6.43774 +21 +-2.30687 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43774 +20 +-2.30687 +11 +6.43284 +21 +-2.31284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43284 +20 +-2.31284 +11 +6.42687 +21 +-2.31774 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42687 +20 +-2.31774 +11 +6.42007 +21 +-2.32137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42007 +20 +-2.32137 +11 +6.41268 +21 +-2.32361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41268 +20 +-2.32361 +11 +6.405 +21 +-2.32437 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.405 +20 +-2.32437 +11 +6.39732 +21 +-2.32361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39732 +20 +-2.32361 +11 +6.38993 +21 +-2.32137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38993 +20 +-2.32137 +11 +6.38313 +21 +-2.31774 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38313 +20 +-2.31774 +11 +6.37716 +21 +-2.31284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37716 +20 +-2.31284 +11 +6.37226 +21 +-2.30687 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37226 +20 +-2.30687 +11 +6.36863 +21 +-2.30007 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36863 +20 +-2.30007 +11 +6.36639 +21 +-2.29268 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36639 +20 +-2.29268 +11 +6.36563 +21 +-2.285 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36563 +20 +-2.285 +11 +6.36639 +21 +-2.27732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36639 +20 +-2.27732 +11 +6.36863 +21 +-2.26993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36863 +20 +-2.26993 +11 +6.37226 +21 +-2.26313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37226 +20 +-2.26313 +11 +6.37716 +21 +-2.25716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37716 +20 +-2.25716 +11 +6.37791 +21 +-2.25655 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37791 +20 +-2.25655 +11 +6.34924 +21 +-2.22787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34924 +20 +-2.22787 +11 +6.26855 +21 +-2.22787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26855 +20 +-2.22787 +11 +6.26637 +21 +-2.23507 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26637 +20 +-2.23507 +11 +6.26274 +21 +-2.24187 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26274 +20 +-2.24187 +11 +6.25784 +21 +-2.24784 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25784 +20 +-2.24784 +11 +6.25187 +21 +-2.25274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25187 +20 +-2.25274 +11 +6.24507 +21 +-2.25637 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24507 +20 +-2.25637 +11 +6.23768 +21 +-2.25861 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23768 +20 +-2.25861 +11 +6.23 +21 +-2.25937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23 +20 +-2.25937 +11 +6.22232 +21 +-2.25861 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22232 +20 +-2.25861 +11 +6.21493 +21 +-2.25637 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21493 +20 +-2.25637 +11 +6.20813 +21 +-2.25274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20813 +20 +-2.25274 +11 +6.20216 +21 +-2.24784 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20216 +20 +-2.24784 +11 +6.19726 +21 +-2.24187 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19726 +20 +-2.24187 +11 +6.19363 +21 +-2.23507 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19363 +20 +-2.23507 +11 +6.19139 +21 +-2.22768 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19139 +20 +-2.22768 +11 +6.19063 +21 +-2.22 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19063 +20 +-2.22 +11 +6.19139 +21 +-2.21232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19139 +20 +-2.21232 +11 +6.19363 +21 +-2.20493 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19363 +20 +-2.20493 +11 +6.19726 +21 +-2.19813 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19726 +20 +-2.19813 +11 +6.20216 +21 +-2.19216 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20216 +20 +-2.19216 +11 +6.20813 +21 +-2.18726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20813 +20 +-2.18726 +11 +6.21493 +21 +-2.18363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21493 +20 +-2.18363 +11 +6.22232 +21 +-2.18139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22232 +20 +-2.18139 +11 +6.23 +21 +-2.18063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23 +20 +-2.18063 +11 +6.23768 +21 +-2.18139 +0 +CIRCLE +8 +BLACK +10 +6.23 +20 +-2.22 +40 +0.019685 +0 +CIRCLE +8 +BLACK +10 +6.405 +20 +-2.285 +40 +0.019685 +0 +CIRCLE +8 +BLACK +10 +5.92093 +20 +-2.825 +40 +0.019685 +0 +CIRCLE +8 +BLACK +10 +5.97 +20 +-4.21 +40 +0.019685 +0 +CIRCLE +8 +BLACK +10 +5.66 +20 +-4.265 +40 +0.019685 +0 +CIRCLE +8 +BLACK +10 +6.04 +20 +-2.355 +40 +0.019685 +0 +CIRCLE +8 +BLACK +10 +6.09537 +20 +-2.67037 +40 +0.019685 +0 +CIRCLE +8 +BLACK +10 +6.43 +20 +-4.295 +40 +0.019685 +0 +CIRCLE +8 +BLACK +10 +6.05 +20 +-3.06 +40 +0.019685 +0 +CIRCLE +8 +BLACK +10 +6.43 +20 +-4.095 +40 +0.019685 +0 +CIRCLE +8 +BLACK +10 +5.825 +20 +-3.08 +40 +0.019685 +0 +CIRCLE +8 +BLACK +10 +5.71 +20 +-2.345 +40 +0.019685 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.76443 +20 +-1.89161 +11 +6.7726 +21 +-1.89225 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.7726 +20 +-1.89225 +11 +6.78057 +21 +-1.89417 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.78057 +20 +-1.89417 +11 +6.78814 +21 +-1.8973 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.78814 +20 +-1.8973 +11 +6.79512 +21 +-1.90158 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.79512 +20 +-1.90158 +11 +6.80135 +21 +-1.9069 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.80135 +20 +-1.9069 +11 +6.80667 +21 +-1.91313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.80667 +20 +-1.91313 +11 +6.81096 +21 +-1.92012 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81096 +20 +-1.92012 +11 +6.81409 +21 +-1.92769 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81409 +20 +-1.92769 +11 +6.816 +21 +-1.93566 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.816 +20 +-1.93566 +11 +6.81665 +21 +-1.94383 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81665 +20 +-1.94383 +11 +6.81665 +21 +-1.94383 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81665 +20 +-1.94383 +11 +6.81663 +21 +-1.94387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81663 +20 +-1.94387 +11 +6.81665 +21 +-1.94391 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81665 +20 +-1.94391 +11 +6.68447 +21 +-5.12373 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68447 +20 +-5.12373 +11 +6.68417 +21 +-5.12438 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68417 +20 +-5.12438 +11 +6.6839 +21 +-5.12504 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6839 +20 +-5.12504 +11 +6.68386 +21 +-5.12506 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68386 +20 +-5.12506 +11 +6.68384 +21 +-5.1251 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68384 +20 +-5.1251 +11 +6.68317 +21 +-5.12534 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68317 +20 +-5.12534 +11 +6.6825 +21 +-5.12562 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6825 +20 +-5.12562 +11 +6.67888 +21 +-5.12562 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67888 +20 +-5.12562 +11 +6.67888 +21 +-5.12562 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67888 +20 +-5.12562 +11 +6.67246 +21 +-5.12562 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67246 +20 +-5.12562 +11 +6.65969 +21 +-5.12706 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65969 +20 +-5.12706 +11 +6.64716 +21 +-5.12992 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64716 +20 +-5.12992 +11 +6.63503 +21 +-5.13416 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63503 +20 +-5.13416 +11 +6.62345 +21 +-5.13974 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62345 +20 +-5.13974 +11 +6.61257 +21 +-5.14657 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61257 +20 +-5.14657 +11 +6.60252 +21 +-5.15459 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60252 +20 +-5.15459 +11 +6.59343 +21 +-5.16367 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59343 +20 +-5.16367 +11 +6.58542 +21 +-5.17372 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58542 +20 +-5.17372 +11 +6.57858 +21 +-5.1846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57858 +20 +-5.1846 +11 +6.57301 +21 +-5.19618 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57301 +20 +-5.19618 +11 +6.56876 +21 +-5.20831 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56876 +20 +-5.20831 +11 +6.5659 +21 +-5.22084 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5659 +20 +-5.22084 +11 +6.56446 +21 +-5.23361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56446 +20 +-5.23361 +11 +6.56446 +21 +-5.24003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56446 +20 +-5.24003 +11 +6.56446 +21 +-5.24003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56446 +20 +-5.24003 +11 +6.56446 +21 +-5.24003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56446 +20 +-5.24003 +11 +6.56446 +21 +-5.24004 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56446 +20 +-5.24004 +11 +6.56409 +21 +-5.24119 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56409 +20 +-5.24119 +11 +6.56394 +21 +-5.2413 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56394 +20 +-5.2413 +11 +6.56389 +21 +-5.24143 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56389 +20 +-5.24143 +11 +6.5636 +21 +-5.24154 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5636 +20 +-5.24154 +11 +6.5631 +21 +-5.24191 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5631 +20 +-5.24191 +11 +6.56273 +21 +-5.24191 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56273 +20 +-5.24191 +11 +6.5625 +21 +-5.242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5625 +20 +-5.242 +11 +5.4575 +21 +-5.24193 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4575 +20 +-5.24193 +11 +5.45727 +21 +-5.24184 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45727 +20 +-5.24184 +11 +5.4569 +21 +-5.24184 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4569 +20 +-5.24184 +11 +5.4564 +21 +-5.24148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4564 +20 +-5.24148 +11 +5.45611 +21 +-5.24136 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45611 +20 +-5.24136 +11 +5.45606 +21 +-5.24123 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45606 +20 +-5.24123 +11 +5.45591 +21 +-5.24112 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45591 +20 +-5.24112 +11 +5.45554 +21 +-5.23997 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45554 +20 +-5.23997 +11 +5.45554 +21 +-5.23997 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45554 +20 +-5.23997 +11 +5.45554 +21 +-5.23997 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45554 +20 +-5.23997 +11 +5.45554 +21 +-5.23996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45554 +20 +-5.23996 +11 +5.45554 +21 +-5.23354 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45554 +20 +-5.23354 +11 +5.4541 +21 +-5.22077 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4541 +20 +-5.22077 +11 +5.45124 +21 +-5.20824 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45124 +20 +-5.20824 +11 +5.44699 +21 +-5.19611 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44699 +20 +-5.19611 +11 +5.44142 +21 +-5.18453 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44142 +20 +-5.18453 +11 +5.43458 +21 +-5.17365 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43458 +20 +-5.17365 +11 +5.42657 +21 +-5.1636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42657 +20 +-5.1636 +11 +5.41748 +21 +-5.15452 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41748 +20 +-5.15452 +11 +5.40743 +21 +-5.1465 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40743 +20 +-5.1465 +11 +5.39655 +21 +-5.13967 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39655 +20 +-5.13967 +11 +5.38497 +21 +-5.13409 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38497 +20 +-5.13409 +11 +5.37284 +21 +-5.12985 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37284 +20 +-5.12985 +11 +5.36031 +21 +-5.12699 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36031 +20 +-5.12699 +11 +5.34754 +21 +-5.12555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34754 +20 +-5.12555 +11 +5.34112 +21 +-5.12555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34112 +20 +-5.12555 +11 +5.3375 +21 +-5.12555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3375 +20 +-5.12555 +11 +5.33683 +21 +-5.12527 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33683 +20 +-5.12527 +11 +5.33616 +21 +-5.12503 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33616 +20 +-5.12503 +11 +5.33614 +21 +-5.12499 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33614 +20 +-5.12499 +11 +5.3361 +21 +-5.12497 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3361 +20 +-5.12497 +11 +5.33583 +21 +-5.12431 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33583 +20 +-5.12431 +11 +5.33553 +21 +-5.12366 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33553 +20 +-5.12366 +11 +5.20252 +21 +-1.94391 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20252 +20 +-1.94391 +11 +5.20253 +21 +-1.94387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20253 +20 +-1.94387 +11 +5.20252 +21 +-1.94383 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20252 +20 +-1.94383 +11 +5.20316 +21 +-1.93566 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20316 +20 +-1.93566 +11 +5.20507 +21 +-1.92769 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20507 +20 +-1.92769 +11 +5.20821 +21 +-1.92012 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20821 +20 +-1.92012 +11 +5.21249 +21 +-1.91313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.21249 +20 +-1.91313 +11 +5.21781 +21 +-1.9069 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.21781 +20 +-1.9069 +11 +5.22404 +21 +-1.90158 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.22404 +20 +-1.90158 +11 +5.23103 +21 +-1.8973 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.23103 +20 +-1.8973 +11 +5.2386 +21 +-1.89417 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.2386 +20 +-1.89417 +11 +5.24656 +21 +-1.89225 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.24656 +20 +-1.89225 +11 +5.25473 +21 +-1.89161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25473 +20 +-1.89161 +11 +5.25473 +21 +-1.89161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25473 +20 +-1.89161 +11 +6.76443 +21 +-1.89161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25473 +20 +-1.89555 +11 +5.25473 +21 +-1.89555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25473 +20 +-1.89555 +11 +5.25093 +21 +-1.89555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25093 +20 +-1.89555 +11 +5.24343 +21 +-1.89674 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.24343 +20 +-1.89674 +11 +5.2362 +21 +-1.89908 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.2362 +20 +-1.89908 +11 +5.22943 +21 +-1.90253 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.22943 +20 +-1.90253 +11 +5.22328 +21 +-1.907 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.22328 +20 +-1.907 +11 +5.21791 +21 +-1.91237 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.21791 +20 +-1.91237 +11 +5.21344 +21 +-1.91852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.21344 +20 +-1.91852 +11 +5.20999 +21 +-1.92529 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20999 +20 +-1.92529 +11 +5.20764 +21 +-1.93252 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20764 +20 +-1.93252 +11 +5.20645 +21 +-1.94003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20645 +20 +-1.94003 +11 +5.20645 +21 +-1.94379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20645 +20 +-1.94379 +11 +5.33938 +21 +-5.12161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33938 +20 +-5.12161 +11 +5.34112 +21 +-5.12161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34112 +20 +-5.12161 +11 +5.35349 +21 +-5.12226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.35349 +20 +-5.12226 +11 +5.36573 +21 +-5.1242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36573 +20 +-5.1242 +11 +5.37769 +21 +-5.1274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37769 +20 +-5.1274 +11 +5.38926 +21 +-5.13184 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38926 +20 +-5.13184 +11 +5.4003 +21 +-5.13747 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4003 +20 +-5.13747 +11 +5.41069 +21 +-5.14421 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41069 +20 +-5.14421 +11 +5.42031 +21 +-5.15201 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42031 +20 +-5.15201 +11 +5.42907 +21 +-5.16077 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42907 +20 +-5.16077 +11 +5.43687 +21 +-5.1704 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43687 +20 +-5.1704 +11 +5.44362 +21 +-5.18079 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44362 +20 +-5.18079 +11 +5.44924 +21 +-5.19183 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44924 +20 +-5.19183 +11 +5.45368 +21 +-5.20339 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45368 +20 +-5.20339 +11 +5.45689 +21 +-5.21536 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45689 +20 +-5.21536 +11 +5.45882 +21 +-5.22759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45882 +20 +-5.22759 +11 +5.45937 +21 +-5.238 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45937 +20 +-5.238 +11 +6.56063 +21 +-5.23807 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56063 +20 +-5.23807 +11 +6.56118 +21 +-5.22766 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56118 +20 +-5.22766 +11 +6.56311 +21 +-5.21543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56311 +20 +-5.21543 +11 +6.56632 +21 +-5.20346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56632 +20 +-5.20346 +11 +6.57076 +21 +-5.1919 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57076 +20 +-5.1919 +11 +6.57638 +21 +-5.18086 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57638 +20 +-5.18086 +11 +6.58313 +21 +-5.17047 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58313 +20 +-5.17047 +11 +6.59093 +21 +-5.16084 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59093 +20 +-5.16084 +11 +6.59969 +21 +-5.15208 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59969 +20 +-5.15208 +11 +6.60932 +21 +-5.14428 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60932 +20 +-5.14428 +11 +6.6197 +21 +-5.13754 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6197 +20 +-5.13754 +11 +6.63074 +21 +-5.13191 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63074 +20 +-5.13191 +11 +6.64231 +21 +-5.12747 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64231 +20 +-5.12747 +11 +6.65428 +21 +-5.12427 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65428 +20 +-5.12427 +11 +6.66651 +21 +-5.12233 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66651 +20 +-5.12233 +11 +6.67888 +21 +-5.12168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67888 +20 +-5.12168 +11 +6.67888 +21 +-5.12168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67888 +20 +-5.12168 +11 +6.68062 +21 +-5.12168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68062 +20 +-5.12168 +11 +6.81271 +21 +-1.9438 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81271 +20 +-1.9438 +11 +6.81271 +21 +-1.94003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81271 +20 +-1.94003 +11 +6.81152 +21 +-1.93252 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81152 +20 +-1.93252 +11 +6.80917 +21 +-1.92529 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.80917 +20 +-1.92529 +11 +6.80572 +21 +-1.91852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.80572 +20 +-1.91852 +11 +6.80126 +21 +-1.91237 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.80126 +20 +-1.91237 +11 +6.79588 +21 +-1.907 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.79588 +20 +-1.907 +11 +6.78973 +21 +-1.90253 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.78973 +20 +-1.90253 +11 +6.78296 +21 +-1.89908 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.78296 +20 +-1.89908 +11 +6.77573 +21 +-1.89674 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.77573 +20 +-1.89674 +11 +6.76823 +21 +-1.89555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.76823 +20 +-1.89555 +11 +6.76443 +21 +-1.89555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.76443 +20 +-1.89555 +11 +5.25473 +21 +-1.89555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25473 +20 +-1.89555 +11 +5.25473 +21 +-1.89555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25473 +20 +-1.89555 +11 +5.25473 +21 +-1.89555 + 0 +ENDSEC + 0 +EOF diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/DXF/StudioMic-B_Mask.dxf b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/DXF/StudioMic-B_Mask.dxf new file mode 100755 index 0000000..e69de29 diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/DXF/StudioMic-B_Paste.dxf b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/DXF/StudioMic-B_Paste.dxf new file mode 100755 index 0000000..c49a5f4 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/DXF/StudioMic-B_Paste.dxf @@ -0,0 +1,2416 @@ + 0 +SECTION + 2 +HEADER + 9 +$ANGBASE + 50 +0.0 + 9 +$ANGDIR + 70 +1 + 9 +$MEASUREMENT + 70 +0 + 0 +ENDSEC + 0 +SECTION + 2 +TABLES + 0 +TABLE + 2 +LTYPE + 70 +4 + 0 +LTYPE + 5 +40F + 2 +CONTINUOUS + 70 +0 + 3 +Solid line + 72 +65 + 73 +0 + 40 +0.0 + 0 +LTYPE + 5 +410 + 2 +DASHDOT + 70 +0 + 3 +Dash Dot ____ _ ____ _ + 72 +65 + 73 +4 + 40 +2.0 + 49 +1.25 + 49 +-0.25 + 49 +0.25 + 49 +-0.25 + 0 +LTYPE + 5 +411 + 2 +DASHED + 70 +0 + 3 +Dashed __ __ __ __ __ + 72 +65 + 73 +2 + 40 +0.75 + 49 +0.5 + 49 +-0.25 + 0 +LTYPE + 5 +43B + 2 +DOTTED + 70 +0 + 3 +Dotted . . . . + 72 +65 + 73 +2 + 40 +0.2 + 49 +0.0 + 49 +-0.2 + 0 +ENDTAB + 0 +TABLE + 2 +STYLE + 70 +4 + 0 +STYLE + 2 +KICAD + 70 +0 + 40 +0 + 41 +1 + 42 +1 + 50 +0 + 71 +0 + 3 +isocp.shx + 0 +STYLE + 2 +KICADB + 70 +0 + 40 +0 + 41 +1 + 42 +1 + 50 +0 + 71 +0 + 3 +isocp.shx + 0 +STYLE + 2 +KICADI + 70 +0 + 40 +0 + 41 +1 + 42 +1 + 50 +15 + 71 +0 + 3 +isocp.shx + 0 +STYLE + 2 +KICADBI + 70 +0 + 40 +0 + 41 +1 + 42 +1 + 50 +15 + 71 +0 + 3 +isocp.shx + 0 +ENDTAB + 0 +TABLE + 2 +LAYER + 70 +1 + 0 +LAYER + 2 +BLACK + 70 +0 + 62 +7 + 6 +CONTINUOUS + 0 +ENDTAB + 0 +ENDSEC + 0 +SECTION + 2 +ENTITIES +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.76443 +20 +-1.89161 +11 +6.7726 +21 +-1.89225 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.7726 +20 +-1.89225 +11 +6.78057 +21 +-1.89417 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.78057 +20 +-1.89417 +11 +6.78814 +21 +-1.8973 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.78814 +20 +-1.8973 +11 +6.79512 +21 +-1.90158 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.79512 +20 +-1.90158 +11 +6.80135 +21 +-1.9069 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.80135 +20 +-1.9069 +11 +6.80667 +21 +-1.91313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.80667 +20 +-1.91313 +11 +6.81096 +21 +-1.92012 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81096 +20 +-1.92012 +11 +6.81409 +21 +-1.92769 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81409 +20 +-1.92769 +11 +6.816 +21 +-1.93566 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.816 +20 +-1.93566 +11 +6.81665 +21 +-1.94383 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81665 +20 +-1.94383 +11 +6.81665 +21 +-1.94383 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81665 +20 +-1.94383 +11 +6.81663 +21 +-1.94387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81663 +20 +-1.94387 +11 +6.81665 +21 +-1.94391 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81665 +20 +-1.94391 +11 +6.68447 +21 +-5.12373 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68447 +20 +-5.12373 +11 +6.68417 +21 +-5.12438 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68417 +20 +-5.12438 +11 +6.6839 +21 +-5.12504 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6839 +20 +-5.12504 +11 +6.68386 +21 +-5.12506 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68386 +20 +-5.12506 +11 +6.68384 +21 +-5.1251 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68384 +20 +-5.1251 +11 +6.68317 +21 +-5.12534 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68317 +20 +-5.12534 +11 +6.6825 +21 +-5.12562 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6825 +20 +-5.12562 +11 +6.67888 +21 +-5.12562 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67888 +20 +-5.12562 +11 +6.67888 +21 +-5.12562 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67888 +20 +-5.12562 +11 +6.67246 +21 +-5.12562 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67246 +20 +-5.12562 +11 +6.65969 +21 +-5.12706 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65969 +20 +-5.12706 +11 +6.64716 +21 +-5.12992 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64716 +20 +-5.12992 +11 +6.63503 +21 +-5.13416 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63503 +20 +-5.13416 +11 +6.62345 +21 +-5.13974 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62345 +20 +-5.13974 +11 +6.61257 +21 +-5.14657 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61257 +20 +-5.14657 +11 +6.60252 +21 +-5.15459 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60252 +20 +-5.15459 +11 +6.59343 +21 +-5.16367 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59343 +20 +-5.16367 +11 +6.58542 +21 +-5.17372 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58542 +20 +-5.17372 +11 +6.57858 +21 +-5.1846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57858 +20 +-5.1846 +11 +6.57301 +21 +-5.19618 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57301 +20 +-5.19618 +11 +6.56876 +21 +-5.20831 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56876 +20 +-5.20831 +11 +6.5659 +21 +-5.22084 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5659 +20 +-5.22084 +11 +6.56446 +21 +-5.23361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56446 +20 +-5.23361 +11 +6.56446 +21 +-5.24003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56446 +20 +-5.24003 +11 +6.56446 +21 +-5.24003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56446 +20 +-5.24003 +11 +6.56446 +21 +-5.24003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56446 +20 +-5.24003 +11 +6.56446 +21 +-5.24004 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56446 +20 +-5.24004 +11 +6.56409 +21 +-5.24119 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56409 +20 +-5.24119 +11 +6.56394 +21 +-5.2413 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56394 +20 +-5.2413 +11 +6.56389 +21 +-5.24143 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56389 +20 +-5.24143 +11 +6.5636 +21 +-5.24154 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5636 +20 +-5.24154 +11 +6.5631 +21 +-5.24191 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5631 +20 +-5.24191 +11 +6.56273 +21 +-5.24191 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56273 +20 +-5.24191 +11 +6.5625 +21 +-5.242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5625 +20 +-5.242 +11 +5.4575 +21 +-5.24193 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4575 +20 +-5.24193 +11 +5.45727 +21 +-5.24184 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45727 +20 +-5.24184 +11 +5.4569 +21 +-5.24184 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4569 +20 +-5.24184 +11 +5.4564 +21 +-5.24148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4564 +20 +-5.24148 +11 +5.45611 +21 +-5.24136 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45611 +20 +-5.24136 +11 +5.45606 +21 +-5.24123 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45606 +20 +-5.24123 +11 +5.45591 +21 +-5.24112 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45591 +20 +-5.24112 +11 +5.45554 +21 +-5.23997 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45554 +20 +-5.23997 +11 +5.45554 +21 +-5.23997 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45554 +20 +-5.23997 +11 +5.45554 +21 +-5.23997 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45554 +20 +-5.23997 +11 +5.45554 +21 +-5.23996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45554 +20 +-5.23996 +11 +5.45554 +21 +-5.23354 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45554 +20 +-5.23354 +11 +5.4541 +21 +-5.22077 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4541 +20 +-5.22077 +11 +5.45124 +21 +-5.20824 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45124 +20 +-5.20824 +11 +5.44699 +21 +-5.19611 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44699 +20 +-5.19611 +11 +5.44142 +21 +-5.18453 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44142 +20 +-5.18453 +11 +5.43458 +21 +-5.17365 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43458 +20 +-5.17365 +11 +5.42657 +21 +-5.1636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42657 +20 +-5.1636 +11 +5.41748 +21 +-5.15452 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41748 +20 +-5.15452 +11 +5.40743 +21 +-5.1465 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40743 +20 +-5.1465 +11 +5.39655 +21 +-5.13967 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39655 +20 +-5.13967 +11 +5.38497 +21 +-5.13409 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38497 +20 +-5.13409 +11 +5.37284 +21 +-5.12985 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37284 +20 +-5.12985 +11 +5.36031 +21 +-5.12699 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36031 +20 +-5.12699 +11 +5.34754 +21 +-5.12555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34754 +20 +-5.12555 +11 +5.34112 +21 +-5.12555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34112 +20 +-5.12555 +11 +5.3375 +21 +-5.12555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3375 +20 +-5.12555 +11 +5.33683 +21 +-5.12527 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33683 +20 +-5.12527 +11 +5.33616 +21 +-5.12503 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33616 +20 +-5.12503 +11 +5.33614 +21 +-5.12499 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33614 +20 +-5.12499 +11 +5.3361 +21 +-5.12497 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3361 +20 +-5.12497 +11 +5.33583 +21 +-5.12431 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33583 +20 +-5.12431 +11 +5.33553 +21 +-5.12366 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33553 +20 +-5.12366 +11 +5.20252 +21 +-1.94391 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20252 +20 +-1.94391 +11 +5.20253 +21 +-1.94387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20253 +20 +-1.94387 +11 +5.20252 +21 +-1.94383 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20252 +20 +-1.94383 +11 +5.20316 +21 +-1.93566 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20316 +20 +-1.93566 +11 +5.20507 +21 +-1.92769 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20507 +20 +-1.92769 +11 +5.20821 +21 +-1.92012 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20821 +20 +-1.92012 +11 +5.21249 +21 +-1.91313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.21249 +20 +-1.91313 +11 +5.21781 +21 +-1.9069 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.21781 +20 +-1.9069 +11 +5.22404 +21 +-1.90158 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.22404 +20 +-1.90158 +11 +5.23103 +21 +-1.8973 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.23103 +20 +-1.8973 +11 +5.2386 +21 +-1.89417 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.2386 +20 +-1.89417 +11 +5.24656 +21 +-1.89225 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.24656 +20 +-1.89225 +11 +5.25473 +21 +-1.89161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25473 +20 +-1.89161 +11 +5.25473 +21 +-1.89161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25473 +20 +-1.89161 +11 +6.76443 +21 +-1.89161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25473 +20 +-1.89555 +11 +5.25473 +21 +-1.89555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25473 +20 +-1.89555 +11 +5.25093 +21 +-1.89555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25093 +20 +-1.89555 +11 +5.24343 +21 +-1.89674 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.24343 +20 +-1.89674 +11 +5.2362 +21 +-1.89908 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.2362 +20 +-1.89908 +11 +5.22943 +21 +-1.90253 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.22943 +20 +-1.90253 +11 +5.22328 +21 +-1.907 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.22328 +20 +-1.907 +11 +5.21791 +21 +-1.91237 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.21791 +20 +-1.91237 +11 +5.21344 +21 +-1.91852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.21344 +20 +-1.91852 +11 +5.20999 +21 +-1.92529 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20999 +20 +-1.92529 +11 +5.20764 +21 +-1.93252 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20764 +20 +-1.93252 +11 +5.20645 +21 +-1.94003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20645 +20 +-1.94003 +11 +5.20645 +21 +-1.94379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20645 +20 +-1.94379 +11 +5.33938 +21 +-5.12161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33938 +20 +-5.12161 +11 +5.34112 +21 +-5.12161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34112 +20 +-5.12161 +11 +5.35349 +21 +-5.12226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.35349 +20 +-5.12226 +11 +5.36573 +21 +-5.1242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36573 +20 +-5.1242 +11 +5.37769 +21 +-5.1274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37769 +20 +-5.1274 +11 +5.38926 +21 +-5.13184 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38926 +20 +-5.13184 +11 +5.4003 +21 +-5.13747 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4003 +20 +-5.13747 +11 +5.41069 +21 +-5.14421 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41069 +20 +-5.14421 +11 +5.42031 +21 +-5.15201 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42031 +20 +-5.15201 +11 +5.42907 +21 +-5.16077 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42907 +20 +-5.16077 +11 +5.43687 +21 +-5.1704 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43687 +20 +-5.1704 +11 +5.44362 +21 +-5.18079 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44362 +20 +-5.18079 +11 +5.44924 +21 +-5.19183 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44924 +20 +-5.19183 +11 +5.45368 +21 +-5.20339 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45368 +20 +-5.20339 +11 +5.45689 +21 +-5.21536 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45689 +20 +-5.21536 +11 +5.45882 +21 +-5.22759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45882 +20 +-5.22759 +11 +5.45937 +21 +-5.238 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45937 +20 +-5.238 +11 +6.56063 +21 +-5.23807 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56063 +20 +-5.23807 +11 +6.56118 +21 +-5.22766 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56118 +20 +-5.22766 +11 +6.56311 +21 +-5.21543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56311 +20 +-5.21543 +11 +6.56632 +21 +-5.20346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56632 +20 +-5.20346 +11 +6.57076 +21 +-5.1919 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57076 +20 +-5.1919 +11 +6.57638 +21 +-5.18086 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57638 +20 +-5.18086 +11 +6.58313 +21 +-5.17047 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58313 +20 +-5.17047 +11 +6.59093 +21 +-5.16084 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59093 +20 +-5.16084 +11 +6.59969 +21 +-5.15208 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59969 +20 +-5.15208 +11 +6.60932 +21 +-5.14428 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60932 +20 +-5.14428 +11 +6.6197 +21 +-5.13754 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6197 +20 +-5.13754 +11 +6.63074 +21 +-5.13191 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63074 +20 +-5.13191 +11 +6.64231 +21 +-5.12747 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64231 +20 +-5.12747 +11 +6.65428 +21 +-5.12427 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65428 +20 +-5.12427 +11 +6.66651 +21 +-5.12233 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66651 +20 +-5.12233 +11 +6.67888 +21 +-5.12168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67888 +20 +-5.12168 +11 +6.67888 +21 +-5.12168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67888 +20 +-5.12168 +11 +6.68062 +21 +-5.12168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68062 +20 +-5.12168 +11 +6.81271 +21 +-1.9438 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81271 +20 +-1.9438 +11 +6.81271 +21 +-1.94003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81271 +20 +-1.94003 +11 +6.81152 +21 +-1.93252 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81152 +20 +-1.93252 +11 +6.80917 +21 +-1.92529 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.80917 +20 +-1.92529 +11 +6.80572 +21 +-1.91852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.80572 +20 +-1.91852 +11 +6.80126 +21 +-1.91237 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.80126 +20 +-1.91237 +11 +6.79588 +21 +-1.907 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.79588 +20 +-1.907 +11 +6.78973 +21 +-1.90253 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.78973 +20 +-1.90253 +11 +6.78296 +21 +-1.89908 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.78296 +20 +-1.89908 +11 +6.77573 +21 +-1.89674 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.77573 +20 +-1.89674 +11 +6.76823 +21 +-1.89555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.76823 +20 +-1.89555 +11 +6.76443 +21 +-1.89555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.76443 +20 +-1.89555 +11 +5.25473 +21 +-1.89555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25473 +20 +-1.89555 +11 +5.25473 +21 +-1.89555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25473 +20 +-1.89555 +11 +5.25473 +21 +-1.89555 + 0 +ENDSEC + 0 +EOF diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/DXF/StudioMic-B_Silkscreen.dxf b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/DXF/StudioMic-B_Silkscreen.dxf new file mode 100755 index 0000000..c49a5f4 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/DXF/StudioMic-B_Silkscreen.dxf @@ -0,0 +1,2416 @@ + 0 +SECTION + 2 +HEADER + 9 +$ANGBASE + 50 +0.0 + 9 +$ANGDIR + 70 +1 + 9 +$MEASUREMENT + 70 +0 + 0 +ENDSEC + 0 +SECTION + 2 +TABLES + 0 +TABLE + 2 +LTYPE + 70 +4 + 0 +LTYPE + 5 +40F + 2 +CONTINUOUS + 70 +0 + 3 +Solid line + 72 +65 + 73 +0 + 40 +0.0 + 0 +LTYPE + 5 +410 + 2 +DASHDOT + 70 +0 + 3 +Dash Dot ____ _ ____ _ + 72 +65 + 73 +4 + 40 +2.0 + 49 +1.25 + 49 +-0.25 + 49 +0.25 + 49 +-0.25 + 0 +LTYPE + 5 +411 + 2 +DASHED + 70 +0 + 3 +Dashed __ __ __ __ __ + 72 +65 + 73 +2 + 40 +0.75 + 49 +0.5 + 49 +-0.25 + 0 +LTYPE + 5 +43B + 2 +DOTTED + 70 +0 + 3 +Dotted . . . . + 72 +65 + 73 +2 + 40 +0.2 + 49 +0.0 + 49 +-0.2 + 0 +ENDTAB + 0 +TABLE + 2 +STYLE + 70 +4 + 0 +STYLE + 2 +KICAD + 70 +0 + 40 +0 + 41 +1 + 42 +1 + 50 +0 + 71 +0 + 3 +isocp.shx + 0 +STYLE + 2 +KICADB + 70 +0 + 40 +0 + 41 +1 + 42 +1 + 50 +0 + 71 +0 + 3 +isocp.shx + 0 +STYLE + 2 +KICADI + 70 +0 + 40 +0 + 41 +1 + 42 +1 + 50 +15 + 71 +0 + 3 +isocp.shx + 0 +STYLE + 2 +KICADBI + 70 +0 + 40 +0 + 41 +1 + 42 +1 + 50 +15 + 71 +0 + 3 +isocp.shx + 0 +ENDTAB + 0 +TABLE + 2 +LAYER + 70 +1 + 0 +LAYER + 2 +BLACK + 70 +0 + 62 +7 + 6 +CONTINUOUS + 0 +ENDTAB + 0 +ENDSEC + 0 +SECTION + 2 +ENTITIES +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.76443 +20 +-1.89161 +11 +6.7726 +21 +-1.89225 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.7726 +20 +-1.89225 +11 +6.78057 +21 +-1.89417 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.78057 +20 +-1.89417 +11 +6.78814 +21 +-1.8973 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.78814 +20 +-1.8973 +11 +6.79512 +21 +-1.90158 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.79512 +20 +-1.90158 +11 +6.80135 +21 +-1.9069 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.80135 +20 +-1.9069 +11 +6.80667 +21 +-1.91313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.80667 +20 +-1.91313 +11 +6.81096 +21 +-1.92012 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81096 +20 +-1.92012 +11 +6.81409 +21 +-1.92769 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81409 +20 +-1.92769 +11 +6.816 +21 +-1.93566 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.816 +20 +-1.93566 +11 +6.81665 +21 +-1.94383 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81665 +20 +-1.94383 +11 +6.81665 +21 +-1.94383 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81665 +20 +-1.94383 +11 +6.81663 +21 +-1.94387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81663 +20 +-1.94387 +11 +6.81665 +21 +-1.94391 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81665 +20 +-1.94391 +11 +6.68447 +21 +-5.12373 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68447 +20 +-5.12373 +11 +6.68417 +21 +-5.12438 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68417 +20 +-5.12438 +11 +6.6839 +21 +-5.12504 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6839 +20 +-5.12504 +11 +6.68386 +21 +-5.12506 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68386 +20 +-5.12506 +11 +6.68384 +21 +-5.1251 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68384 +20 +-5.1251 +11 +6.68317 +21 +-5.12534 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68317 +20 +-5.12534 +11 +6.6825 +21 +-5.12562 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6825 +20 +-5.12562 +11 +6.67888 +21 +-5.12562 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67888 +20 +-5.12562 +11 +6.67888 +21 +-5.12562 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67888 +20 +-5.12562 +11 +6.67246 +21 +-5.12562 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67246 +20 +-5.12562 +11 +6.65969 +21 +-5.12706 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65969 +20 +-5.12706 +11 +6.64716 +21 +-5.12992 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64716 +20 +-5.12992 +11 +6.63503 +21 +-5.13416 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63503 +20 +-5.13416 +11 +6.62345 +21 +-5.13974 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62345 +20 +-5.13974 +11 +6.61257 +21 +-5.14657 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61257 +20 +-5.14657 +11 +6.60252 +21 +-5.15459 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60252 +20 +-5.15459 +11 +6.59343 +21 +-5.16367 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59343 +20 +-5.16367 +11 +6.58542 +21 +-5.17372 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58542 +20 +-5.17372 +11 +6.57858 +21 +-5.1846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57858 +20 +-5.1846 +11 +6.57301 +21 +-5.19618 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57301 +20 +-5.19618 +11 +6.56876 +21 +-5.20831 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56876 +20 +-5.20831 +11 +6.5659 +21 +-5.22084 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5659 +20 +-5.22084 +11 +6.56446 +21 +-5.23361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56446 +20 +-5.23361 +11 +6.56446 +21 +-5.24003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56446 +20 +-5.24003 +11 +6.56446 +21 +-5.24003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56446 +20 +-5.24003 +11 +6.56446 +21 +-5.24003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56446 +20 +-5.24003 +11 +6.56446 +21 +-5.24004 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56446 +20 +-5.24004 +11 +6.56409 +21 +-5.24119 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56409 +20 +-5.24119 +11 +6.56394 +21 +-5.2413 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56394 +20 +-5.2413 +11 +6.56389 +21 +-5.24143 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56389 +20 +-5.24143 +11 +6.5636 +21 +-5.24154 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5636 +20 +-5.24154 +11 +6.5631 +21 +-5.24191 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5631 +20 +-5.24191 +11 +6.56273 +21 +-5.24191 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56273 +20 +-5.24191 +11 +6.5625 +21 +-5.242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5625 +20 +-5.242 +11 +5.4575 +21 +-5.24193 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4575 +20 +-5.24193 +11 +5.45727 +21 +-5.24184 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45727 +20 +-5.24184 +11 +5.4569 +21 +-5.24184 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4569 +20 +-5.24184 +11 +5.4564 +21 +-5.24148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4564 +20 +-5.24148 +11 +5.45611 +21 +-5.24136 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45611 +20 +-5.24136 +11 +5.45606 +21 +-5.24123 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45606 +20 +-5.24123 +11 +5.45591 +21 +-5.24112 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45591 +20 +-5.24112 +11 +5.45554 +21 +-5.23997 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45554 +20 +-5.23997 +11 +5.45554 +21 +-5.23997 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45554 +20 +-5.23997 +11 +5.45554 +21 +-5.23997 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45554 +20 +-5.23997 +11 +5.45554 +21 +-5.23996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45554 +20 +-5.23996 +11 +5.45554 +21 +-5.23354 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45554 +20 +-5.23354 +11 +5.4541 +21 +-5.22077 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4541 +20 +-5.22077 +11 +5.45124 +21 +-5.20824 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45124 +20 +-5.20824 +11 +5.44699 +21 +-5.19611 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44699 +20 +-5.19611 +11 +5.44142 +21 +-5.18453 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44142 +20 +-5.18453 +11 +5.43458 +21 +-5.17365 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43458 +20 +-5.17365 +11 +5.42657 +21 +-5.1636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42657 +20 +-5.1636 +11 +5.41748 +21 +-5.15452 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41748 +20 +-5.15452 +11 +5.40743 +21 +-5.1465 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40743 +20 +-5.1465 +11 +5.39655 +21 +-5.13967 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39655 +20 +-5.13967 +11 +5.38497 +21 +-5.13409 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38497 +20 +-5.13409 +11 +5.37284 +21 +-5.12985 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37284 +20 +-5.12985 +11 +5.36031 +21 +-5.12699 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36031 +20 +-5.12699 +11 +5.34754 +21 +-5.12555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34754 +20 +-5.12555 +11 +5.34112 +21 +-5.12555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34112 +20 +-5.12555 +11 +5.3375 +21 +-5.12555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3375 +20 +-5.12555 +11 +5.33683 +21 +-5.12527 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33683 +20 +-5.12527 +11 +5.33616 +21 +-5.12503 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33616 +20 +-5.12503 +11 +5.33614 +21 +-5.12499 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33614 +20 +-5.12499 +11 +5.3361 +21 +-5.12497 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3361 +20 +-5.12497 +11 +5.33583 +21 +-5.12431 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33583 +20 +-5.12431 +11 +5.33553 +21 +-5.12366 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33553 +20 +-5.12366 +11 +5.20252 +21 +-1.94391 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20252 +20 +-1.94391 +11 +5.20253 +21 +-1.94387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20253 +20 +-1.94387 +11 +5.20252 +21 +-1.94383 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20252 +20 +-1.94383 +11 +5.20316 +21 +-1.93566 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20316 +20 +-1.93566 +11 +5.20507 +21 +-1.92769 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20507 +20 +-1.92769 +11 +5.20821 +21 +-1.92012 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20821 +20 +-1.92012 +11 +5.21249 +21 +-1.91313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.21249 +20 +-1.91313 +11 +5.21781 +21 +-1.9069 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.21781 +20 +-1.9069 +11 +5.22404 +21 +-1.90158 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.22404 +20 +-1.90158 +11 +5.23103 +21 +-1.8973 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.23103 +20 +-1.8973 +11 +5.2386 +21 +-1.89417 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.2386 +20 +-1.89417 +11 +5.24656 +21 +-1.89225 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.24656 +20 +-1.89225 +11 +5.25473 +21 +-1.89161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25473 +20 +-1.89161 +11 +5.25473 +21 +-1.89161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25473 +20 +-1.89161 +11 +6.76443 +21 +-1.89161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25473 +20 +-1.89555 +11 +5.25473 +21 +-1.89555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25473 +20 +-1.89555 +11 +5.25093 +21 +-1.89555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25093 +20 +-1.89555 +11 +5.24343 +21 +-1.89674 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.24343 +20 +-1.89674 +11 +5.2362 +21 +-1.89908 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.2362 +20 +-1.89908 +11 +5.22943 +21 +-1.90253 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.22943 +20 +-1.90253 +11 +5.22328 +21 +-1.907 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.22328 +20 +-1.907 +11 +5.21791 +21 +-1.91237 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.21791 +20 +-1.91237 +11 +5.21344 +21 +-1.91852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.21344 +20 +-1.91852 +11 +5.20999 +21 +-1.92529 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20999 +20 +-1.92529 +11 +5.20764 +21 +-1.93252 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20764 +20 +-1.93252 +11 +5.20645 +21 +-1.94003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20645 +20 +-1.94003 +11 +5.20645 +21 +-1.94379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20645 +20 +-1.94379 +11 +5.33938 +21 +-5.12161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33938 +20 +-5.12161 +11 +5.34112 +21 +-5.12161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34112 +20 +-5.12161 +11 +5.35349 +21 +-5.12226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.35349 +20 +-5.12226 +11 +5.36573 +21 +-5.1242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36573 +20 +-5.1242 +11 +5.37769 +21 +-5.1274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37769 +20 +-5.1274 +11 +5.38926 +21 +-5.13184 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38926 +20 +-5.13184 +11 +5.4003 +21 +-5.13747 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4003 +20 +-5.13747 +11 +5.41069 +21 +-5.14421 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41069 +20 +-5.14421 +11 +5.42031 +21 +-5.15201 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42031 +20 +-5.15201 +11 +5.42907 +21 +-5.16077 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42907 +20 +-5.16077 +11 +5.43687 +21 +-5.1704 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43687 +20 +-5.1704 +11 +5.44362 +21 +-5.18079 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44362 +20 +-5.18079 +11 +5.44924 +21 +-5.19183 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44924 +20 +-5.19183 +11 +5.45368 +21 +-5.20339 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45368 +20 +-5.20339 +11 +5.45689 +21 +-5.21536 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45689 +20 +-5.21536 +11 +5.45882 +21 +-5.22759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45882 +20 +-5.22759 +11 +5.45937 +21 +-5.238 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45937 +20 +-5.238 +11 +6.56063 +21 +-5.23807 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56063 +20 +-5.23807 +11 +6.56118 +21 +-5.22766 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56118 +20 +-5.22766 +11 +6.56311 +21 +-5.21543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56311 +20 +-5.21543 +11 +6.56632 +21 +-5.20346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56632 +20 +-5.20346 +11 +6.57076 +21 +-5.1919 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57076 +20 +-5.1919 +11 +6.57638 +21 +-5.18086 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57638 +20 +-5.18086 +11 +6.58313 +21 +-5.17047 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58313 +20 +-5.17047 +11 +6.59093 +21 +-5.16084 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59093 +20 +-5.16084 +11 +6.59969 +21 +-5.15208 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59969 +20 +-5.15208 +11 +6.60932 +21 +-5.14428 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60932 +20 +-5.14428 +11 +6.6197 +21 +-5.13754 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6197 +20 +-5.13754 +11 +6.63074 +21 +-5.13191 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63074 +20 +-5.13191 +11 +6.64231 +21 +-5.12747 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64231 +20 +-5.12747 +11 +6.65428 +21 +-5.12427 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65428 +20 +-5.12427 +11 +6.66651 +21 +-5.12233 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66651 +20 +-5.12233 +11 +6.67888 +21 +-5.12168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67888 +20 +-5.12168 +11 +6.67888 +21 +-5.12168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67888 +20 +-5.12168 +11 +6.68062 +21 +-5.12168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68062 +20 +-5.12168 +11 +6.81271 +21 +-1.9438 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81271 +20 +-1.9438 +11 +6.81271 +21 +-1.94003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81271 +20 +-1.94003 +11 +6.81152 +21 +-1.93252 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81152 +20 +-1.93252 +11 +6.80917 +21 +-1.92529 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.80917 +20 +-1.92529 +11 +6.80572 +21 +-1.91852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.80572 +20 +-1.91852 +11 +6.80126 +21 +-1.91237 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.80126 +20 +-1.91237 +11 +6.79588 +21 +-1.907 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.79588 +20 +-1.907 +11 +6.78973 +21 +-1.90253 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.78973 +20 +-1.90253 +11 +6.78296 +21 +-1.89908 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.78296 +20 +-1.89908 +11 +6.77573 +21 +-1.89674 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.77573 +20 +-1.89674 +11 +6.76823 +21 +-1.89555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.76823 +20 +-1.89555 +11 +6.76443 +21 +-1.89555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.76443 +20 +-1.89555 +11 +5.25473 +21 +-1.89555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25473 +20 +-1.89555 +11 +5.25473 +21 +-1.89555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25473 +20 +-1.89555 +11 +5.25473 +21 +-1.89555 + 0 +ENDSEC + 0 +EOF diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/DXF/StudioMic-Edge_Cuts.dxf b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/DXF/StudioMic-Edge_Cuts.dxf new file mode 100755 index 0000000..c49a5f4 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/DXF/StudioMic-Edge_Cuts.dxf @@ -0,0 +1,2416 @@ + 0 +SECTION + 2 +HEADER + 9 +$ANGBASE + 50 +0.0 + 9 +$ANGDIR + 70 +1 + 9 +$MEASUREMENT + 70 +0 + 0 +ENDSEC + 0 +SECTION + 2 +TABLES + 0 +TABLE + 2 +LTYPE + 70 +4 + 0 +LTYPE + 5 +40F + 2 +CONTINUOUS + 70 +0 + 3 +Solid line + 72 +65 + 73 +0 + 40 +0.0 + 0 +LTYPE + 5 +410 + 2 +DASHDOT + 70 +0 + 3 +Dash Dot ____ _ ____ _ + 72 +65 + 73 +4 + 40 +2.0 + 49 +1.25 + 49 +-0.25 + 49 +0.25 + 49 +-0.25 + 0 +LTYPE + 5 +411 + 2 +DASHED + 70 +0 + 3 +Dashed __ __ __ __ __ + 72 +65 + 73 +2 + 40 +0.75 + 49 +0.5 + 49 +-0.25 + 0 +LTYPE + 5 +43B + 2 +DOTTED + 70 +0 + 3 +Dotted . . . . + 72 +65 + 73 +2 + 40 +0.2 + 49 +0.0 + 49 +-0.2 + 0 +ENDTAB + 0 +TABLE + 2 +STYLE + 70 +4 + 0 +STYLE + 2 +KICAD + 70 +0 + 40 +0 + 41 +1 + 42 +1 + 50 +0 + 71 +0 + 3 +isocp.shx + 0 +STYLE + 2 +KICADB + 70 +0 + 40 +0 + 41 +1 + 42 +1 + 50 +0 + 71 +0 + 3 +isocp.shx + 0 +STYLE + 2 +KICADI + 70 +0 + 40 +0 + 41 +1 + 42 +1 + 50 +15 + 71 +0 + 3 +isocp.shx + 0 +STYLE + 2 +KICADBI + 70 +0 + 40 +0 + 41 +1 + 42 +1 + 50 +15 + 71 +0 + 3 +isocp.shx + 0 +ENDTAB + 0 +TABLE + 2 +LAYER + 70 +1 + 0 +LAYER + 2 +BLACK + 70 +0 + 62 +7 + 6 +CONTINUOUS + 0 +ENDTAB + 0 +ENDSEC + 0 +SECTION + 2 +ENTITIES +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.76443 +20 +-1.89161 +11 +6.7726 +21 +-1.89225 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.7726 +20 +-1.89225 +11 +6.78057 +21 +-1.89417 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.78057 +20 +-1.89417 +11 +6.78814 +21 +-1.8973 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.78814 +20 +-1.8973 +11 +6.79512 +21 +-1.90158 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.79512 +20 +-1.90158 +11 +6.80135 +21 +-1.9069 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.80135 +20 +-1.9069 +11 +6.80667 +21 +-1.91313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.80667 +20 +-1.91313 +11 +6.81096 +21 +-1.92012 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81096 +20 +-1.92012 +11 +6.81409 +21 +-1.92769 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81409 +20 +-1.92769 +11 +6.816 +21 +-1.93566 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.816 +20 +-1.93566 +11 +6.81665 +21 +-1.94383 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81665 +20 +-1.94383 +11 +6.81665 +21 +-1.94383 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81665 +20 +-1.94383 +11 +6.81663 +21 +-1.94387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81663 +20 +-1.94387 +11 +6.81665 +21 +-1.94391 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81665 +20 +-1.94391 +11 +6.68447 +21 +-5.12373 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68447 +20 +-5.12373 +11 +6.68417 +21 +-5.12438 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68417 +20 +-5.12438 +11 +6.6839 +21 +-5.12504 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6839 +20 +-5.12504 +11 +6.68386 +21 +-5.12506 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68386 +20 +-5.12506 +11 +6.68384 +21 +-5.1251 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68384 +20 +-5.1251 +11 +6.68317 +21 +-5.12534 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68317 +20 +-5.12534 +11 +6.6825 +21 +-5.12562 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6825 +20 +-5.12562 +11 +6.67888 +21 +-5.12562 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67888 +20 +-5.12562 +11 +6.67888 +21 +-5.12562 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67888 +20 +-5.12562 +11 +6.67246 +21 +-5.12562 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67246 +20 +-5.12562 +11 +6.65969 +21 +-5.12706 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65969 +20 +-5.12706 +11 +6.64716 +21 +-5.12992 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64716 +20 +-5.12992 +11 +6.63503 +21 +-5.13416 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63503 +20 +-5.13416 +11 +6.62345 +21 +-5.13974 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62345 +20 +-5.13974 +11 +6.61257 +21 +-5.14657 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61257 +20 +-5.14657 +11 +6.60252 +21 +-5.15459 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60252 +20 +-5.15459 +11 +6.59343 +21 +-5.16367 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59343 +20 +-5.16367 +11 +6.58542 +21 +-5.17372 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58542 +20 +-5.17372 +11 +6.57858 +21 +-5.1846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57858 +20 +-5.1846 +11 +6.57301 +21 +-5.19618 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57301 +20 +-5.19618 +11 +6.56876 +21 +-5.20831 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56876 +20 +-5.20831 +11 +6.5659 +21 +-5.22084 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5659 +20 +-5.22084 +11 +6.56446 +21 +-5.23361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56446 +20 +-5.23361 +11 +6.56446 +21 +-5.24003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56446 +20 +-5.24003 +11 +6.56446 +21 +-5.24003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56446 +20 +-5.24003 +11 +6.56446 +21 +-5.24003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56446 +20 +-5.24003 +11 +6.56446 +21 +-5.24004 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56446 +20 +-5.24004 +11 +6.56409 +21 +-5.24119 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56409 +20 +-5.24119 +11 +6.56394 +21 +-5.2413 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56394 +20 +-5.2413 +11 +6.56389 +21 +-5.24143 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56389 +20 +-5.24143 +11 +6.5636 +21 +-5.24154 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5636 +20 +-5.24154 +11 +6.5631 +21 +-5.24191 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5631 +20 +-5.24191 +11 +6.56273 +21 +-5.24191 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56273 +20 +-5.24191 +11 +6.5625 +21 +-5.242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5625 +20 +-5.242 +11 +5.4575 +21 +-5.24193 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4575 +20 +-5.24193 +11 +5.45727 +21 +-5.24184 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45727 +20 +-5.24184 +11 +5.4569 +21 +-5.24184 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4569 +20 +-5.24184 +11 +5.4564 +21 +-5.24148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4564 +20 +-5.24148 +11 +5.45611 +21 +-5.24136 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45611 +20 +-5.24136 +11 +5.45606 +21 +-5.24123 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45606 +20 +-5.24123 +11 +5.45591 +21 +-5.24112 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45591 +20 +-5.24112 +11 +5.45554 +21 +-5.23997 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45554 +20 +-5.23997 +11 +5.45554 +21 +-5.23997 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45554 +20 +-5.23997 +11 +5.45554 +21 +-5.23997 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45554 +20 +-5.23997 +11 +5.45554 +21 +-5.23996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45554 +20 +-5.23996 +11 +5.45554 +21 +-5.23354 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45554 +20 +-5.23354 +11 +5.4541 +21 +-5.22077 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4541 +20 +-5.22077 +11 +5.45124 +21 +-5.20824 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45124 +20 +-5.20824 +11 +5.44699 +21 +-5.19611 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44699 +20 +-5.19611 +11 +5.44142 +21 +-5.18453 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44142 +20 +-5.18453 +11 +5.43458 +21 +-5.17365 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43458 +20 +-5.17365 +11 +5.42657 +21 +-5.1636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42657 +20 +-5.1636 +11 +5.41748 +21 +-5.15452 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41748 +20 +-5.15452 +11 +5.40743 +21 +-5.1465 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40743 +20 +-5.1465 +11 +5.39655 +21 +-5.13967 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39655 +20 +-5.13967 +11 +5.38497 +21 +-5.13409 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38497 +20 +-5.13409 +11 +5.37284 +21 +-5.12985 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37284 +20 +-5.12985 +11 +5.36031 +21 +-5.12699 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36031 +20 +-5.12699 +11 +5.34754 +21 +-5.12555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34754 +20 +-5.12555 +11 +5.34112 +21 +-5.12555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34112 +20 +-5.12555 +11 +5.3375 +21 +-5.12555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3375 +20 +-5.12555 +11 +5.33683 +21 +-5.12527 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33683 +20 +-5.12527 +11 +5.33616 +21 +-5.12503 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33616 +20 +-5.12503 +11 +5.33614 +21 +-5.12499 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33614 +20 +-5.12499 +11 +5.3361 +21 +-5.12497 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3361 +20 +-5.12497 +11 +5.33583 +21 +-5.12431 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33583 +20 +-5.12431 +11 +5.33553 +21 +-5.12366 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33553 +20 +-5.12366 +11 +5.20252 +21 +-1.94391 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20252 +20 +-1.94391 +11 +5.20253 +21 +-1.94387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20253 +20 +-1.94387 +11 +5.20252 +21 +-1.94383 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20252 +20 +-1.94383 +11 +5.20316 +21 +-1.93566 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20316 +20 +-1.93566 +11 +5.20507 +21 +-1.92769 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20507 +20 +-1.92769 +11 +5.20821 +21 +-1.92012 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20821 +20 +-1.92012 +11 +5.21249 +21 +-1.91313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.21249 +20 +-1.91313 +11 +5.21781 +21 +-1.9069 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.21781 +20 +-1.9069 +11 +5.22404 +21 +-1.90158 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.22404 +20 +-1.90158 +11 +5.23103 +21 +-1.8973 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.23103 +20 +-1.8973 +11 +5.2386 +21 +-1.89417 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.2386 +20 +-1.89417 +11 +5.24656 +21 +-1.89225 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.24656 +20 +-1.89225 +11 +5.25473 +21 +-1.89161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25473 +20 +-1.89161 +11 +5.25473 +21 +-1.89161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25473 +20 +-1.89161 +11 +6.76443 +21 +-1.89161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25473 +20 +-1.89555 +11 +5.25473 +21 +-1.89555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25473 +20 +-1.89555 +11 +5.25093 +21 +-1.89555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25093 +20 +-1.89555 +11 +5.24343 +21 +-1.89674 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.24343 +20 +-1.89674 +11 +5.2362 +21 +-1.89908 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.2362 +20 +-1.89908 +11 +5.22943 +21 +-1.90253 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.22943 +20 +-1.90253 +11 +5.22328 +21 +-1.907 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.22328 +20 +-1.907 +11 +5.21791 +21 +-1.91237 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.21791 +20 +-1.91237 +11 +5.21344 +21 +-1.91852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.21344 +20 +-1.91852 +11 +5.20999 +21 +-1.92529 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20999 +20 +-1.92529 +11 +5.20764 +21 +-1.93252 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20764 +20 +-1.93252 +11 +5.20645 +21 +-1.94003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20645 +20 +-1.94003 +11 +5.20645 +21 +-1.94379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20645 +20 +-1.94379 +11 +5.33938 +21 +-5.12161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33938 +20 +-5.12161 +11 +5.34112 +21 +-5.12161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34112 +20 +-5.12161 +11 +5.35349 +21 +-5.12226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.35349 +20 +-5.12226 +11 +5.36573 +21 +-5.1242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36573 +20 +-5.1242 +11 +5.37769 +21 +-5.1274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37769 +20 +-5.1274 +11 +5.38926 +21 +-5.13184 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38926 +20 +-5.13184 +11 +5.4003 +21 +-5.13747 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4003 +20 +-5.13747 +11 +5.41069 +21 +-5.14421 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41069 +20 +-5.14421 +11 +5.42031 +21 +-5.15201 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42031 +20 +-5.15201 +11 +5.42907 +21 +-5.16077 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42907 +20 +-5.16077 +11 +5.43687 +21 +-5.1704 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43687 +20 +-5.1704 +11 +5.44362 +21 +-5.18079 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44362 +20 +-5.18079 +11 +5.44924 +21 +-5.19183 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44924 +20 +-5.19183 +11 +5.45368 +21 +-5.20339 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45368 +20 +-5.20339 +11 +5.45689 +21 +-5.21536 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45689 +20 +-5.21536 +11 +5.45882 +21 +-5.22759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45882 +20 +-5.22759 +11 +5.45937 +21 +-5.238 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45937 +20 +-5.238 +11 +6.56063 +21 +-5.23807 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56063 +20 +-5.23807 +11 +6.56118 +21 +-5.22766 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56118 +20 +-5.22766 +11 +6.56311 +21 +-5.21543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56311 +20 +-5.21543 +11 +6.56632 +21 +-5.20346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56632 +20 +-5.20346 +11 +6.57076 +21 +-5.1919 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57076 +20 +-5.1919 +11 +6.57638 +21 +-5.18086 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57638 +20 +-5.18086 +11 +6.58313 +21 +-5.17047 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58313 +20 +-5.17047 +11 +6.59093 +21 +-5.16084 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59093 +20 +-5.16084 +11 +6.59969 +21 +-5.15208 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59969 +20 +-5.15208 +11 +6.60932 +21 +-5.14428 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60932 +20 +-5.14428 +11 +6.6197 +21 +-5.13754 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6197 +20 +-5.13754 +11 +6.63074 +21 +-5.13191 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63074 +20 +-5.13191 +11 +6.64231 +21 +-5.12747 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64231 +20 +-5.12747 +11 +6.65428 +21 +-5.12427 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65428 +20 +-5.12427 +11 +6.66651 +21 +-5.12233 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66651 +20 +-5.12233 +11 +6.67888 +21 +-5.12168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67888 +20 +-5.12168 +11 +6.67888 +21 +-5.12168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67888 +20 +-5.12168 +11 +6.68062 +21 +-5.12168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68062 +20 +-5.12168 +11 +6.81271 +21 +-1.9438 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81271 +20 +-1.9438 +11 +6.81271 +21 +-1.94003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81271 +20 +-1.94003 +11 +6.81152 +21 +-1.93252 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81152 +20 +-1.93252 +11 +6.80917 +21 +-1.92529 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.80917 +20 +-1.92529 +11 +6.80572 +21 +-1.91852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.80572 +20 +-1.91852 +11 +6.80126 +21 +-1.91237 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.80126 +20 +-1.91237 +11 +6.79588 +21 +-1.907 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.79588 +20 +-1.907 +11 +6.78973 +21 +-1.90253 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.78973 +20 +-1.90253 +11 +6.78296 +21 +-1.89908 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.78296 +20 +-1.89908 +11 +6.77573 +21 +-1.89674 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.77573 +20 +-1.89674 +11 +6.76823 +21 +-1.89555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.76823 +20 +-1.89555 +11 +6.76443 +21 +-1.89555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.76443 +20 +-1.89555 +11 +5.25473 +21 +-1.89555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25473 +20 +-1.89555 +11 +5.25473 +21 +-1.89555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25473 +20 +-1.89555 +11 +5.25473 +21 +-1.89555 + 0 +ENDSEC + 0 +EOF diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/DXF/StudioMic-F_Cu.dxf b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/DXF/StudioMic-F_Cu.dxf new file mode 100755 index 0000000..465d956 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/DXF/StudioMic-F_Cu.dxf @@ -0,0 +1,59558 @@ + 0 +SECTION + 2 +HEADER + 9 +$ANGBASE + 50 +0.0 + 9 +$ANGDIR + 70 +1 + 9 +$MEASUREMENT + 70 +0 + 0 +ENDSEC + 0 +SECTION + 2 +TABLES + 0 +TABLE + 2 +LTYPE + 70 +4 + 0 +LTYPE + 5 +40F + 2 +CONTINUOUS + 70 +0 + 3 +Solid line + 72 +65 + 73 +0 + 40 +0.0 + 0 +LTYPE + 5 +410 + 2 +DASHDOT + 70 +0 + 3 +Dash Dot ____ _ ____ _ + 72 +65 + 73 +4 + 40 +2.0 + 49 +1.25 + 49 +-0.25 + 49 +0.25 + 49 +-0.25 + 0 +LTYPE + 5 +411 + 2 +DASHED + 70 +0 + 3 +Dashed __ __ __ __ __ + 72 +65 + 73 +2 + 40 +0.75 + 49 +0.5 + 49 +-0.25 + 0 +LTYPE + 5 +43B + 2 +DOTTED + 70 +0 + 3 +Dotted . . . . + 72 +65 + 73 +2 + 40 +0.2 + 49 +0.0 + 49 +-0.2 + 0 +ENDTAB + 0 +TABLE + 2 +STYLE + 70 +4 + 0 +STYLE + 2 +KICAD + 70 +0 + 40 +0 + 41 +1 + 42 +1 + 50 +0 + 71 +0 + 3 +isocp.shx + 0 +STYLE + 2 +KICADB + 70 +0 + 40 +0 + 41 +1 + 42 +1 + 50 +0 + 71 +0 + 3 +isocp.shx + 0 +STYLE + 2 +KICADI + 70 +0 + 40 +0 + 41 +1 + 42 +1 + 50 +15 + 71 +0 + 3 +isocp.shx + 0 +STYLE + 2 +KICADBI + 70 +0 + 40 +0 + 41 +1 + 42 +1 + 50 +15 + 71 +0 + 3 +isocp.shx + 0 +ENDTAB + 0 +TABLE + 2 +LAYER + 70 +1 + 0 +LAYER + 2 +BLACK + 70 +0 + 62 +7 + 6 +CONTINUOUS + 0 +ENDTAB + 0 +ENDSEC + 0 +SECTION + 2 +ENTITIES +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84814 +20 +-4.5748 +11 +5.85133 +21 +-4.57694 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85133 +20 +-4.57694 +11 +5.85346 +21 +-4.58013 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85346 +20 +-4.58013 +11 +5.85421 +21 +-4.5839 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85421 +20 +-4.5839 +11 +5.85421 +21 +-4.6828 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85421 +20 +-4.6828 +11 +5.99659 +21 +-4.6828 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99659 +20 +-4.6828 +11 +5.99737 +21 +-4.68297 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99737 +20 +-4.68297 +11 +6.02679 +21 +-4.68297 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02679 +20 +-4.68297 +11 +6.03056 +21 +-4.68372 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03056 +20 +-4.68372 +11 +6.03375 +21 +-4.68586 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03375 +20 +-4.68586 +11 +6.03588 +21 +-4.68905 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03588 +20 +-4.68905 +11 +6.03663 +21 +-4.69281 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03663 +20 +-4.69281 +11 +6.03663 +21 +-4.69611 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03663 +20 +-4.69611 +11 +6.0376 +21 +-4.69688 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0376 +20 +-4.69688 +11 +6.03872 +21 +-4.69758 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03872 +20 +-4.69758 +11 +6.11057 +21 +-4.76943 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11057 +20 +-4.76943 +11 +6.11127 +21 +-4.77055 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11127 +20 +-4.77055 +11 +6.11209 +21 +-4.77158 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11209 +20 +-4.77158 +11 +6.11219 +21 +-4.77202 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11219 +20 +-4.77202 +11 +6.11243 +21 +-4.7724 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11243 +20 +-4.7724 +11 +6.11258 +21 +-4.77371 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11258 +20 +-4.77371 +11 +6.11287 +21 +-4.775 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11287 +20 +-4.775 +11 +6.11287 +21 +-4.90174 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11287 +20 +-4.90174 +11 +6.12326 +21 +-4.91213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12326 +20 +-4.91213 +11 +6.32174 +21 +-4.91213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32174 +20 +-4.91213 +11 +6.35028 +21 +-4.88359 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35028 +20 +-4.88359 +11 +6.35028 +21 +-4.76756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35028 +20 +-4.76756 +11 +6.34781 +21 +-4.76756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34781 +20 +-4.76756 +11 +6.34405 +21 +-4.76681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34405 +20 +-4.76681 +11 +6.34086 +21 +-4.76468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34086 +20 +-4.76468 +11 +6.33872 +21 +-4.76148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33872 +20 +-4.76148 +11 +6.33797 +21 +-4.75772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33797 +20 +-4.75772 +11 +6.33797 +21 +-4.72228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33797 +20 +-4.72228 +11 +6.33872 +21 +-4.71852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33872 +20 +-4.71852 +11 +6.34086 +21 +-4.71532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34086 +20 +-4.71532 +11 +6.34405 +21 +-4.71319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34405 +20 +-4.71319 +11 +6.34781 +21 +-4.71244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34781 +20 +-4.71244 +11 +6.36848 +21 +-4.71244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36848 +20 +-4.71244 +11 +6.37225 +21 +-4.71319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37225 +20 +-4.71319 +11 +6.37544 +21 +-4.71532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37544 +20 +-4.71532 +11 +6.37758 +21 +-4.71852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37758 +20 +-4.71852 +11 +6.37833 +21 +-4.72228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37833 +20 +-4.72228 +11 +6.37833 +21 +-4.75772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37833 +20 +-4.75772 +11 +6.37758 +21 +-4.76148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37758 +20 +-4.76148 +11 +6.37544 +21 +-4.76468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37544 +20 +-4.76468 +11 +6.37225 +21 +-4.76681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37225 +20 +-4.76681 +11 +6.36848 +21 +-4.76756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36848 +20 +-4.76756 +11 +6.36602 +21 +-4.76756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36602 +20 +-4.76756 +11 +6.36602 +21 +-4.88685 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36602 +20 +-4.88685 +11 +6.36573 +21 +-4.88814 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36573 +20 +-4.88814 +11 +6.36558 +21 +-4.88945 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36558 +20 +-4.88945 +11 +6.36534 +21 +-4.88983 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36534 +20 +-4.88983 +11 +6.36524 +21 +-4.89027 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36524 +20 +-4.89027 +11 +6.36442 +21 +-4.8913 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36442 +20 +-4.8913 +11 +6.36372 +21 +-4.89242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36372 +20 +-4.89242 +11 +6.33057 +21 +-4.92557 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33057 +20 +-4.92557 +11 +6.32945 +21 +-4.92627 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32945 +20 +-4.92627 +11 +6.32842 +21 +-4.92709 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32842 +20 +-4.92709 +11 +6.32798 +21 +-4.92719 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32798 +20 +-4.92719 +11 +6.3276 +21 +-4.92743 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3276 +20 +-4.92743 +11 +6.32629 +21 +-4.92758 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32629 +20 +-4.92758 +11 +6.325 +21 +-4.92787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.325 +20 +-4.92787 +11 +6.12 +21 +-4.92787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12 +20 +-4.92787 +11 +6.11871 +21 +-4.92758 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11871 +20 +-4.92758 +11 +6.1174 +21 +-4.92743 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1174 +20 +-4.92743 +11 +6.11702 +21 +-4.92719 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11702 +20 +-4.92719 +11 +6.11658 +21 +-4.92709 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11658 +20 +-4.92709 +11 +6.11555 +21 +-4.92627 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11555 +20 +-4.92627 +11 +6.11443 +21 +-4.92557 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11443 +20 +-4.92557 +11 +6.09943 +21 +-4.91057 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09943 +20 +-4.91057 +11 +6.09873 +21 +-4.90945 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09873 +20 +-4.90945 +11 +6.09791 +21 +-4.90842 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09791 +20 +-4.90842 +11 +6.09781 +21 +-4.90798 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09781 +20 +-4.90798 +11 +6.09757 +21 +-4.9076 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09757 +20 +-4.9076 +11 +6.09742 +21 +-4.90629 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09742 +20 +-4.90629 +11 +6.09713 +21 +-4.905 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09713 +20 +-4.905 +11 +6.09713 +21 +-4.77826 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09713 +20 +-4.77826 +11 +6.03592 +21 +-4.71706 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03592 +20 +-4.71706 +11 +6.03588 +21 +-4.71725 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03588 +20 +-4.71725 +11 +6.03375 +21 +-4.72044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03375 +20 +-4.72044 +11 +6.03056 +21 +-4.72258 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03056 +20 +-4.72258 +11 +6.02679 +21 +-4.72333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02679 +20 +-4.72333 +11 +5.99136 +21 +-4.72333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99136 +20 +-4.72333 +11 +5.98759 +21 +-4.72258 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98759 +20 +-4.72258 +11 +5.9844 +21 +-4.72044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9844 +20 +-4.72044 +11 +5.98226 +21 +-4.71725 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98226 +20 +-4.71725 +11 +5.98152 +21 +-4.71348 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98152 +20 +-4.71348 +11 +5.98152 +21 +-4.69854 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98152 +20 +-4.69854 +11 +5.85421 +21 +-4.69854 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85421 +20 +-4.69854 +11 +5.85421 +21 +-4.73744 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85421 +20 +-4.73744 +11 +5.85346 +21 +-4.74121 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85346 +20 +-4.74121 +11 +5.85133 +21 +-4.7444 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85133 +20 +-4.7444 +11 +5.84814 +21 +-4.74653 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84814 +20 +-4.74653 +11 +5.84437 +21 +-4.74728 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84437 +20 +-4.74728 +11 +5.76563 +21 +-4.74728 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76563 +20 +-4.74728 +11 +5.76186 +21 +-4.74653 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76186 +20 +-4.74653 +11 +5.75867 +21 +-4.7444 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75867 +20 +-4.7444 +11 +5.75654 +21 +-4.74121 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75654 +20 +-4.74121 +11 +5.75579 +21 +-4.73744 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75579 +20 +-4.73744 +11 +5.75579 +21 +-4.5839 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75579 +20 +-4.5839 +11 +5.75654 +21 +-4.58013 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75654 +20 +-4.58013 +11 +5.75867 +21 +-4.57694 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75867 +20 +-4.57694 +11 +5.76186 +21 +-4.5748 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76186 +20 +-4.5748 +11 +5.76563 +21 +-4.57406 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76563 +20 +-4.57406 +11 +5.84437 +21 +-4.57406 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84437 +20 +-4.57406 +11 +5.84814 +21 +-4.5748 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24056 +20 +-4.75557 +11 +6.24375 +21 +-4.75771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24375 +20 +-4.75771 +11 +6.24588 +21 +-4.7609 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24588 +20 +-4.7609 +11 +6.24663 +21 +-4.76467 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24663 +20 +-4.76467 +11 +6.24663 +21 +-4.78533 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24663 +20 +-4.78533 +11 +6.24588 +21 +-4.7891 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24588 +20 +-4.7891 +11 +6.24375 +21 +-4.79229 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24375 +20 +-4.79229 +11 +6.24056 +21 +-4.79443 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24056 +20 +-4.79443 +11 +6.23679 +21 +-4.79518 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23679 +20 +-4.79518 +11 +6.22695 +21 +-4.79518 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22695 +20 +-4.79518 +11 +6.22695 +21 +-4.82077 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22695 +20 +-4.82077 +11 +6.22979 +21 +-4.82108 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22979 +20 +-4.82108 +11 +6.23504 +21 +-4.82304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23504 +20 +-4.82304 +11 +6.23953 +21 +-4.8264 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23953 +20 +-4.8264 +11 +6.24289 +21 +-4.83088 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24289 +20 +-4.83088 +11 +6.24485 +21 +-4.83613 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24485 +20 +-4.83613 +11 +6.2453 +21 +-4.84031 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2453 +20 +-4.84031 +11 +6.2453 +21 +-4.87969 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2453 +20 +-4.87969 +11 +6.24485 +21 +-4.88387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24485 +20 +-4.88387 +11 +6.24289 +21 +-4.88912 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24289 +20 +-4.88912 +11 +6.23953 +21 +-4.8936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23953 +20 +-4.8936 +11 +6.23504 +21 +-4.89696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23504 +20 +-4.89696 +11 +6.22979 +21 +-4.89892 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22979 +20 +-4.89892 +11 +6.22561 +21 +-4.89937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22561 +20 +-4.89937 +11 +6.18624 +21 +-4.89937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18624 +20 +-4.89937 +11 +6.18206 +21 +-4.89892 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18206 +20 +-4.89892 +11 +6.17681 +21 +-4.89696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17681 +20 +-4.89696 +11 +6.17232 +21 +-4.8936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17232 +20 +-4.8936 +11 +6.16896 +21 +-4.88912 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16896 +20 +-4.88912 +11 +6.167 +21 +-4.88387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.167 +20 +-4.88387 +11 +6.16656 +21 +-4.87969 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16656 +20 +-4.87969 +11 +6.16656 +21 +-4.84031 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16656 +20 +-4.84031 +11 +6.167 +21 +-4.83613 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.167 +20 +-4.83613 +11 +6.16896 +21 +-4.83088 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16896 +20 +-4.83088 +11 +6.17232 +21 +-4.8264 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17232 +20 +-4.8264 +11 +6.17681 +21 +-4.82304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17681 +20 +-4.82304 +11 +6.18206 +21 +-4.82108 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18206 +20 +-4.82108 +11 +6.18624 +21 +-4.82063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18624 +20 +-4.82063 +11 +6.2112 +21 +-4.82063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2112 +20 +-4.82063 +11 +6.2112 +21 +-4.79518 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2112 +20 +-4.79518 +11 +6.20136 +21 +-4.79518 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20136 +20 +-4.79518 +11 +6.19759 +21 +-4.79443 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19759 +20 +-4.79443 +11 +6.1944 +21 +-4.79229 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1944 +20 +-4.79229 +11 +6.19226 +21 +-4.7891 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19226 +20 +-4.7891 +11 +6.19152 +21 +-4.78533 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19152 +20 +-4.78533 +11 +6.19152 +21 +-4.76467 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19152 +20 +-4.76467 +11 +6.19226 +21 +-4.7609 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19226 +20 +-4.7609 +11 +6.1944 +21 +-4.75771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1944 +20 +-4.75771 +11 +6.19759 +21 +-4.75557 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19759 +20 +-4.75557 +11 +6.20136 +21 +-4.75482 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20136 +20 +-4.75482 +11 +6.23679 +21 +-4.75482 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23679 +20 +-4.75482 +11 +6.24056 +21 +-4.75557 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03056 +20 +-4.75557 +11 +6.03375 +21 +-4.75771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03375 +20 +-4.75771 +11 +6.03588 +21 +-4.7609 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03588 +20 +-4.7609 +11 +6.03663 +21 +-4.76467 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03663 +20 +-4.76467 +11 +6.03663 +21 +-4.78533 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03663 +20 +-4.78533 +11 +6.03588 +21 +-4.7891 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03588 +20 +-4.7891 +11 +6.03375 +21 +-4.79229 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03375 +20 +-4.79229 +11 +6.03056 +21 +-4.79443 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03056 +20 +-4.79443 +11 +6.02679 +21 +-4.79518 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02679 +20 +-4.79518 +11 +6.01695 +21 +-4.79518 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01695 +20 +-4.79518 +11 +6.01695 +21 +-4.82063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01695 +20 +-4.82063 +11 +6.02876 +21 +-4.82063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02876 +20 +-4.82063 +11 +6.03294 +21 +-4.82108 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03294 +20 +-4.82108 +11 +6.03819 +21 +-4.82304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03819 +20 +-4.82304 +11 +6.04268 +21 +-4.8264 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04268 +20 +-4.8264 +11 +6.04604 +21 +-4.83088 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04604 +20 +-4.83088 +11 +6.048 +21 +-4.83613 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.048 +20 +-4.83613 +11 +6.04844 +21 +-4.84031 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04844 +20 +-4.84031 +11 +6.04844 +21 +-4.87969 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04844 +20 +-4.87969 +11 +6.048 +21 +-4.88387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.048 +20 +-4.88387 +11 +6.04604 +21 +-4.88912 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04604 +20 +-4.88912 +11 +6.04268 +21 +-4.8936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04268 +20 +-4.8936 +11 +6.03819 +21 +-4.89696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03819 +20 +-4.89696 +11 +6.03294 +21 +-4.89892 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03294 +20 +-4.89892 +11 +6.02876 +21 +-4.89937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02876 +20 +-4.89937 +11 +5.98939 +21 +-4.89937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98939 +20 +-4.89937 +11 +5.98521 +21 +-4.89892 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98521 +20 +-4.89892 +11 +5.97996 +21 +-4.89696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97996 +20 +-4.89696 +11 +5.97547 +21 +-4.8936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97547 +20 +-4.8936 +11 +5.97211 +21 +-4.88912 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97211 +20 +-4.88912 +11 +5.97015 +21 +-4.88387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97015 +20 +-4.88387 +11 +5.9697 +21 +-4.87969 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9697 +20 +-4.87969 +11 +5.9697 +21 +-4.84031 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9697 +20 +-4.84031 +11 +5.97015 +21 +-4.83613 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97015 +20 +-4.83613 +11 +5.97211 +21 +-4.83088 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97211 +20 +-4.83088 +11 +5.97547 +21 +-4.8264 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97547 +20 +-4.8264 +11 +5.97996 +21 +-4.82304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97996 +20 +-4.82304 +11 +5.98521 +21 +-4.82108 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98521 +20 +-4.82108 +11 +5.98939 +21 +-4.82063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98939 +20 +-4.82063 +11 +6.0012 +21 +-4.82063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0012 +20 +-4.82063 +11 +6.0012 +21 +-4.79518 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0012 +20 +-4.79518 +11 +5.99136 +21 +-4.79518 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99136 +20 +-4.79518 +11 +5.98759 +21 +-4.79443 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98759 +20 +-4.79443 +11 +5.9844 +21 +-4.79229 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9844 +20 +-4.79229 +11 +5.98226 +21 +-4.7891 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98226 +20 +-4.7891 +11 +5.98152 +21 +-4.78533 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98152 +20 +-4.78533 +11 +5.98152 +21 +-4.76467 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98152 +20 +-4.76467 +11 +5.98226 +21 +-4.7609 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98226 +20 +-4.7609 +11 +5.9844 +21 +-4.75771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9844 +20 +-4.75771 +11 +5.98759 +21 +-4.75557 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98759 +20 +-4.75557 +11 +5.99136 +21 +-4.75482 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99136 +20 +-4.75482 +11 +6.02679 +21 +-4.75482 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02679 +20 +-4.75482 +11 +6.03056 +21 +-4.75557 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33154 +20 +-3.10521 +11 +6.33474 +21 +-3.10735 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33474 +20 +-3.10735 +11 +6.33687 +21 +-3.11054 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33687 +20 +-3.11054 +11 +6.33762 +21 +-3.11431 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33762 +20 +-3.11431 +11 +6.33762 +21 +-3.13399 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33762 +20 +-3.13399 +11 +6.33687 +21 +-3.13776 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33687 +20 +-3.13776 +11 +6.33474 +21 +-3.14095 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33474 +20 +-3.14095 +11 +6.33154 +21 +-3.14309 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33154 +20 +-3.14309 +11 +6.32778 +21 +-3.14383 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32778 +20 +-3.14383 +11 +6.31695 +21 +-3.14383 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31695 +20 +-3.14383 +11 +6.31695 +21 +-3.19095 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31695 +20 +-3.19095 +11 +6.31872 +21 +-3.18918 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31872 +20 +-3.18918 +11 +6.31984 +21 +-3.18848 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31984 +20 +-3.18848 +11 +6.32087 +21 +-3.18765 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32087 +20 +-3.18765 +11 +6.32131 +21 +-3.18755 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32131 +20 +-3.18755 +11 +6.32169 +21 +-3.18732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32169 +20 +-3.18732 +11 +6.323 +21 +-3.18717 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.323 +20 +-3.18717 +11 +6.32429 +21 +-3.18687 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32429 +20 +-3.18687 +11 +6.35118 +21 +-3.18687 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35118 +20 +-3.18687 +11 +6.35118 +21 +-3.18491 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35118 +20 +-3.18491 +11 +6.35193 +21 +-3.18114 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35193 +20 +-3.18114 +11 +6.35406 +21 +-3.17795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35406 +20 +-3.17795 +11 +6.35725 +21 +-3.17581 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35725 +20 +-3.17581 +11 +6.36102 +21 +-3.17506 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36102 +20 +-3.17506 +11 +6.3807 +21 +-3.17506 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3807 +20 +-3.17506 +11 +6.38447 +21 +-3.17581 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38447 +20 +-3.17581 +11 +6.38766 +21 +-3.17795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38766 +20 +-3.17795 +11 +6.3898 +21 +-3.18114 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3898 +20 +-3.18114 +11 +6.39055 +21 +-3.18491 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39055 +20 +-3.18491 +11 +6.39055 +21 +-3.20459 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39055 +20 +-3.20459 +11 +6.3898 +21 +-3.20836 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3898 +20 +-3.20836 +11 +6.38766 +21 +-3.21155 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38766 +20 +-3.21155 +11 +6.38447 +21 +-3.21368 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38447 +20 +-3.21368 +11 +6.3807 +21 +-3.21443 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3807 +20 +-3.21443 +11 +6.36102 +21 +-3.21443 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36102 +20 +-3.21443 +11 +6.35725 +21 +-3.21368 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35725 +20 +-3.21368 +11 +6.35406 +21 +-3.21155 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35406 +20 +-3.21155 +11 +6.35193 +21 +-3.20836 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35193 +20 +-3.20836 +11 +6.35118 +21 +-3.20459 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35118 +20 +-3.20459 +11 +6.35118 +21 +-3.20262 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35118 +20 +-3.20262 +11 +6.32755 +21 +-3.20262 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32755 +20 +-3.20262 +11 +6.31464 +21 +-3.21553 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31464 +20 +-3.21553 +11 +6.31464 +21 +-3.21553 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31464 +20 +-3.21553 +11 +6.31297 +21 +-3.2172 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31297 +20 +-3.2172 +11 +6.31297 +21 +-3.23559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31297 +20 +-3.23559 +11 +6.31222 +21 +-3.23936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31222 +20 +-3.23936 +11 +6.31009 +21 +-3.24255 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31009 +20 +-3.24255 +11 +6.3069 +21 +-3.24468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3069 +20 +-3.24468 +11 +6.30313 +21 +-3.24543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30313 +20 +-3.24543 +11 +6.28344 +21 +-3.24543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28344 +20 +-3.24543 +11 +6.27968 +21 +-3.24468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27968 +20 +-3.24468 +11 +6.27649 +21 +-3.24255 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27649 +20 +-3.24255 +11 +6.27435 +21 +-3.23936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27435 +20 +-3.23936 +11 +6.2736 +21 +-3.23559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2736 +20 +-3.23559 +11 +6.2736 +21 +-3.21591 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2736 +20 +-3.21591 +11 +6.27435 +21 +-3.21214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27435 +20 +-3.21214 +11 +6.27649 +21 +-3.20895 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27649 +20 +-3.20895 +11 +6.27968 +21 +-3.20681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27968 +20 +-3.20681 +11 +6.28344 +21 +-3.20606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28344 +20 +-3.20606 +11 +6.3012 +21 +-3.20606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3012 +20 +-3.20606 +11 +6.3012 +21 +-3.14383 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3012 +20 +-3.14383 +11 +6.29037 +21 +-3.14383 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29037 +20 +-3.14383 +11 +6.28661 +21 +-3.14309 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28661 +20 +-3.14309 +11 +6.28341 +21 +-3.14095 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28341 +20 +-3.14095 +11 +6.28128 +21 +-3.13776 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28128 +20 +-3.13776 +11 +6.28053 +21 +-3.13399 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28053 +20 +-3.13399 +11 +6.28053 +21 +-3.11431 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28053 +20 +-3.11431 +11 +6.28128 +21 +-3.11054 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28128 +20 +-3.11054 +11 +6.28341 +21 +-3.10735 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28341 +20 +-3.10735 +11 +6.28661 +21 +-3.10521 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28661 +20 +-3.10521 +11 +6.29037 +21 +-3.10446 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29037 +20 +-3.10446 +11 +6.32778 +21 +-3.10446 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32778 +20 +-3.10446 +11 +6.33154 +21 +-3.10521 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41154 +20 +-3.10521 +11 +6.41474 +21 +-3.10735 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41474 +20 +-3.10735 +11 +6.41687 +21 +-3.11054 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41687 +20 +-3.11054 +11 +6.41762 +21 +-3.11431 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41762 +20 +-3.11431 +11 +6.41762 +21 +-3.13399 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41762 +20 +-3.13399 +11 +6.41687 +21 +-3.13776 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41687 +20 +-3.13776 +11 +6.41565 +21 +-3.13959 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41565 +20 +-3.13959 +11 +6.4534 +21 +-3.17734 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4534 +20 +-3.17734 +11 +6.45568 +21 +-3.17581 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45568 +20 +-3.17581 +11 +6.45944 +21 +-3.17506 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45944 +20 +-3.17506 +11 +6.47913 +21 +-3.17506 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47913 +20 +-3.17506 +11 +6.4829 +21 +-3.17581 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4829 +20 +-3.17581 +11 +6.48609 +21 +-3.17795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48609 +20 +-3.17795 +11 +6.48822 +21 +-3.18114 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48822 +20 +-3.18114 +11 +6.48897 +21 +-3.18491 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48897 +20 +-3.18491 +11 +6.48897 +21 +-3.18749 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48897 +20 +-3.18749 +11 +6.52739 +21 +-3.18749 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52739 +20 +-3.18749 +11 +6.52739 +21 +-3.18552 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52739 +20 +-3.18552 +11 +6.52814 +21 +-3.18175 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52814 +20 +-3.18175 +11 +6.53027 +21 +-3.17856 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53027 +20 +-3.17856 +11 +6.53347 +21 +-3.17643 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53347 +20 +-3.17643 +11 +6.53723 +21 +-3.17568 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53723 +20 +-3.17568 +11 +6.55692 +21 +-3.17568 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55692 +20 +-3.17568 +11 +6.56068 +21 +-3.17643 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56068 +20 +-3.17643 +11 +6.56388 +21 +-3.17856 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56388 +20 +-3.17856 +11 +6.56601 +21 +-3.18175 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56601 +20 +-3.18175 +11 +6.56676 +21 +-3.18552 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56676 +20 +-3.18552 +11 +6.56676 +21 +-3.2052 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56676 +20 +-3.2052 +11 +6.56601 +21 +-3.20897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56601 +20 +-3.20897 +11 +6.56388 +21 +-3.21216 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56388 +20 +-3.21216 +11 +6.56068 +21 +-3.2143 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56068 +20 +-3.2143 +11 +6.55692 +21 +-3.21505 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55692 +20 +-3.21505 +11 +6.53723 +21 +-3.21505 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53723 +20 +-3.21505 +11 +6.53347 +21 +-3.2143 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53347 +20 +-3.2143 +11 +6.53027 +21 +-3.21216 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53027 +20 +-3.21216 +11 +6.52814 +21 +-3.20897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52814 +20 +-3.20897 +11 +6.52739 +21 +-3.2052 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52739 +20 +-3.2052 +11 +6.52739 +21 +-3.20324 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52739 +20 +-3.20324 +11 +6.48897 +21 +-3.20324 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48897 +20 +-3.20324 +11 +6.48897 +21 +-3.20459 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48897 +20 +-3.20459 +11 +6.48822 +21 +-3.20836 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48822 +20 +-3.20836 +11 +6.48609 +21 +-3.21155 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48609 +20 +-3.21155 +11 +6.4829 +21 +-3.21368 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4829 +20 +-3.21368 +11 +6.47913 +21 +-3.21443 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47913 +20 +-3.21443 +11 +6.45944 +21 +-3.21443 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45944 +20 +-3.21443 +11 +6.45568 +21 +-3.21368 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45568 +20 +-3.21368 +11 +6.45249 +21 +-3.21155 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45249 +20 +-3.21155 +11 +6.45035 +21 +-3.20836 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45035 +20 +-3.20836 +11 +6.4496 +21 +-3.20459 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4496 +20 +-3.20459 +11 +6.4496 +21 +-3.19581 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4496 +20 +-3.19581 +11 +6.39762 +21 +-3.14383 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39762 +20 +-3.14383 +11 +6.37037 +21 +-3.14383 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37037 +20 +-3.14383 +11 +6.36661 +21 +-3.14309 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36661 +20 +-3.14309 +11 +6.36341 +21 +-3.14095 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36341 +20 +-3.14095 +11 +6.36128 +21 +-3.13776 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36128 +20 +-3.13776 +11 +6.36053 +21 +-3.13399 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36053 +20 +-3.13399 +11 +6.36053 +21 +-3.11431 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36053 +20 +-3.11431 +11 +6.36128 +21 +-3.11054 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36128 +20 +-3.11054 +11 +6.36341 +21 +-3.10735 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36341 +20 +-3.10735 +11 +6.36661 +21 +-3.10521 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36661 +20 +-3.10521 +11 +6.37037 +21 +-3.10446 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37037 +20 +-3.10446 +11 +6.40778 +21 +-3.10446 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40778 +20 +-3.10446 +11 +6.41154 +21 +-3.10521 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57568 +20 +-2.98243 +11 +6.57888 +21 +-2.98456 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57888 +20 +-2.98456 +11 +6.58101 +21 +-2.98775 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58101 +20 +-2.98775 +11 +6.58176 +21 +-2.99152 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58176 +20 +-2.99152 +11 +6.58176 +21 +-3.0112 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58176 +20 +-3.0112 +11 +6.58101 +21 +-3.01497 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58101 +20 +-3.01497 +11 +6.57888 +21 +-3.01816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57888 +20 +-3.01816 +11 +6.57568 +21 +-3.0203 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57568 +20 +-3.0203 +11 +6.57192 +21 +-3.02105 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57192 +20 +-3.02105 +11 +6.55495 +21 +-3.02105 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55495 +20 +-3.02105 +11 +6.55495 +21 +-3.07725 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55495 +20 +-3.07725 +11 +6.55692 +21 +-3.07725 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55692 +20 +-3.07725 +11 +6.56068 +21 +-3.078 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56068 +20 +-3.078 +11 +6.56388 +21 +-3.08013 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56388 +20 +-3.08013 +11 +6.56601 +21 +-3.08333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56601 +20 +-3.08333 +11 +6.56676 +21 +-3.08709 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56676 +20 +-3.08709 +11 +6.56676 +21 +-3.10678 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56676 +20 +-3.10678 +11 +6.56601 +21 +-3.11055 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56601 +20 +-3.11055 +11 +6.56388 +21 +-3.11374 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56388 +20 +-3.11374 +11 +6.56068 +21 +-3.11587 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56068 +20 +-3.11587 +11 +6.55692 +21 +-3.11662 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55692 +20 +-3.11662 +11 +6.53853 +21 +-3.11662 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53853 +20 +-3.11662 +11 +6.52503 +21 +-3.13012 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52503 +20 +-3.13012 +11 +6.52391 +21 +-3.13082 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52391 +20 +-3.13082 +11 +6.52288 +21 +-3.13165 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52288 +20 +-3.13165 +11 +6.52244 +21 +-3.13175 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52244 +20 +-3.13175 +11 +6.52206 +21 +-3.13198 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52206 +20 +-3.13198 +11 +6.52075 +21 +-3.13213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52075 +20 +-3.13213 +11 +6.51946 +21 +-3.13243 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51946 +20 +-3.13243 +11 +6.49662 +21 +-3.13243 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49662 +20 +-3.13243 +11 +6.49662 +21 +-3.13439 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49662 +20 +-3.13439 +11 +6.49587 +21 +-3.13816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49587 +20 +-3.13816 +11 +6.49374 +21 +-3.14135 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49374 +20 +-3.14135 +11 +6.49054 +21 +-3.14349 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49054 +20 +-3.14349 +11 +6.48678 +21 +-3.14424 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48678 +20 +-3.14424 +11 +6.44937 +21 +-3.14424 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44937 +20 +-3.14424 +11 +6.44561 +21 +-3.14349 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44561 +20 +-3.14349 +11 +6.44241 +21 +-3.14135 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44241 +20 +-3.14135 +11 +6.44028 +21 +-3.13816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44028 +20 +-3.13816 +11 +6.43953 +21 +-3.13439 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43953 +20 +-3.13439 +11 +6.43953 +21 +-3.11471 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43953 +20 +-3.11471 +11 +6.44028 +21 +-3.11094 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44028 +20 +-3.11094 +11 +6.44241 +21 +-3.10775 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44241 +20 +-3.10775 +11 +6.44561 +21 +-3.10562 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44561 +20 +-3.10562 +11 +6.44937 +21 +-3.10487 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44937 +20 +-3.10487 +11 +6.48678 +21 +-3.10487 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48678 +20 +-3.10487 +11 +6.49054 +21 +-3.10562 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49054 +20 +-3.10562 +11 +6.49374 +21 +-3.10775 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49374 +20 +-3.10775 +11 +6.49587 +21 +-3.11094 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49587 +20 +-3.11094 +11 +6.49662 +21 +-3.11471 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49662 +20 +-3.11471 +11 +6.49662 +21 +-3.11668 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49662 +20 +-3.11668 +11 +6.5162 +21 +-3.11668 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5162 +20 +-3.11668 +11 +6.52739 +21 +-3.10549 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52739 +20 +-3.10549 +11 +6.52739 +21 +-3.08709 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52739 +20 +-3.08709 +11 +6.52814 +21 +-3.08333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52814 +20 +-3.08333 +11 +6.53027 +21 +-3.08013 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53027 +20 +-3.08013 +11 +6.53347 +21 +-3.078 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53347 +20 +-3.078 +11 +6.53723 +21 +-3.07725 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53723 +20 +-3.07725 +11 +6.5392 +21 +-3.07725 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5392 +20 +-3.07725 +11 +6.5392 +21 +-3.01636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5392 +20 +-3.01636 +11 +6.53949 +21 +-3.01507 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53949 +20 +-3.01507 +11 +6.53964 +21 +-3.01376 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53964 +20 +-3.01376 +11 +6.53988 +21 +-3.01338 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53988 +20 +-3.01338 +11 +6.53998 +21 +-3.01295 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53998 +20 +-3.01295 +11 +6.5408 +21 +-3.01191 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5408 +20 +-3.01191 +11 +6.54151 +21 +-3.01079 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54151 +20 +-3.01079 +11 +6.54239 +21 +-3.00991 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54239 +20 +-3.00991 +11 +6.54239 +21 +-2.99152 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54239 +20 +-2.99152 +11 +6.54314 +21 +-2.98775 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54314 +20 +-2.98775 +11 +6.54527 +21 +-2.98456 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54527 +20 +-2.98456 +11 +6.54847 +21 +-2.98243 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54847 +20 +-2.98243 +11 +6.55223 +21 +-2.98168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55223 +20 +-2.98168 +11 +6.57192 +21 +-2.98168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57192 +20 +-2.98168 +11 +6.57568 +21 +-2.98243 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19424 +20 +-2.91065 +11 +6.19616 +21 +-2.91193 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19616 +20 +-2.91193 +11 +6.19744 +21 +-2.91385 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19744 +20 +-2.91385 +11 +6.19789 +21 +-2.91611 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19789 +20 +-2.91611 +11 +6.19789 +21 +-2.98107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19789 +20 +-2.98107 +11 +6.19744 +21 +-2.98333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19744 +20 +-2.98333 +11 +6.19616 +21 +-2.98525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19616 +20 +-2.98525 +11 +6.19424 +21 +-2.98653 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19424 +20 +-2.98653 +11 +6.19198 +21 +-2.98698 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19198 +20 +-2.98698 +11 +6.18017 +21 +-2.98698 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18017 +20 +-2.98698 +11 +6.17791 +21 +-2.98653 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17791 +20 +-2.98653 +11 +6.17599 +21 +-2.98525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17599 +20 +-2.98525 +11 +6.17471 +21 +-2.98333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17471 +20 +-2.98333 +11 +6.17426 +21 +-2.98107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17426 +20 +-2.98107 +11 +6.17426 +21 +-2.97154 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17426 +20 +-2.97154 +11 +6.16963 +21 +-2.97617 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16963 +20 +-2.97617 +11 +6.16963 +21 +-3.00759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16963 +20 +-3.00759 +11 +6.17348 +21 +-3.00759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17348 +20 +-3.00759 +11 +6.17725 +21 +-3.00834 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17725 +20 +-3.00834 +11 +6.18044 +21 +-3.01047 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18044 +20 +-3.01047 +11 +6.18258 +21 +-3.01367 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18258 +20 +-3.01367 +11 +6.18333 +21 +-3.01743 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18333 +20 +-3.01743 +11 +6.18333 +21 +-3.05287 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18333 +20 +-3.05287 +11 +6.18258 +21 +-3.05663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18258 +20 +-3.05663 +11 +6.18044 +21 +-3.05983 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18044 +20 +-3.05983 +11 +6.17725 +21 +-3.06196 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17725 +20 +-3.06196 +11 +6.17348 +21 +-3.06271 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17348 +20 +-3.06271 +11 +6.17102 +21 +-3.06271 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17102 +20 +-3.06271 +11 +6.17102 +21 +-3.08371 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17102 +20 +-3.08371 +11 +6.17428 +21 +-3.08436 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17428 +20 +-3.08436 +11 +6.17748 +21 +-3.08649 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17748 +20 +-3.08649 +11 +6.17961 +21 +-3.08968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17961 +20 +-3.08968 +11 +6.18036 +21 +-3.09345 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18036 +20 +-3.09345 +11 +6.18036 +21 +-3.13085 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18036 +20 +-3.13085 +11 +6.17961 +21 +-3.13462 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17961 +20 +-3.13462 +11 +6.17748 +21 +-3.13781 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17748 +20 +-3.13781 +11 +6.17428 +21 +-3.13994 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17428 +20 +-3.13994 +11 +6.17052 +21 +-3.14069 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17052 +20 +-3.14069 +11 +6.15083 +21 +-3.14069 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15083 +20 +-3.14069 +11 +6.14706 +21 +-3.13994 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14706 +20 +-3.13994 +11 +6.14387 +21 +-3.13781 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14387 +20 +-3.13781 +11 +6.14174 +21 +-3.13462 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14174 +20 +-3.13462 +11 +6.14099 +21 +-3.13085 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14099 +20 +-3.13085 +11 +6.14099 +21 +-3.09345 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14099 +20 +-3.09345 +11 +6.14174 +21 +-3.08968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14174 +20 +-3.08968 +11 +6.14387 +21 +-3.08649 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14387 +20 +-3.08649 +11 +6.14706 +21 +-3.08436 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14706 +20 +-3.08436 +11 +6.15083 +21 +-3.08361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15083 +20 +-3.08361 +11 +6.15528 +21 +-3.08361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15528 +20 +-3.08361 +11 +6.15528 +21 +-3.06271 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15528 +20 +-3.06271 +11 +6.15281 +21 +-3.06271 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15281 +20 +-3.06271 +11 +6.14905 +21 +-3.06196 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14905 +20 +-3.06196 +11 +6.14586 +21 +-3.05983 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14586 +20 +-3.05983 +11 +6.14372 +21 +-3.05663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14372 +20 +-3.05663 +11 +6.14297 +21 +-3.05287 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14297 +20 +-3.05287 +11 +6.14297 +21 +-3.01743 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14297 +20 +-3.01743 +11 +6.14372 +21 +-3.01367 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14372 +20 +-3.01367 +11 +6.14586 +21 +-3.01047 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14586 +20 +-3.01047 +11 +6.14905 +21 +-3.00834 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14905 +20 +-3.00834 +11 +6.15281 +21 +-3.00759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15281 +20 +-3.00759 +11 +6.15388 +21 +-3.00759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15388 +20 +-3.00759 +11 +6.15388 +21 +-2.97291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15388 +20 +-2.97291 +11 +6.15418 +21 +-2.97162 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15418 +20 +-2.97162 +11 +6.15433 +21 +-2.97031 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15433 +20 +-2.97031 +11 +6.15456 +21 +-2.96993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15456 +20 +-2.96993 +11 +6.15466 +21 +-2.96949 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15466 +20 +-2.96949 +11 +6.15549 +21 +-2.96846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15549 +20 +-2.96846 +11 +6.15619 +21 +-2.96734 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15619 +20 +-2.96734 +11 +6.17426 +21 +-2.94927 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17426 +20 +-2.94927 +11 +6.17426 +21 +-2.91611 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17426 +20 +-2.91611 +11 +6.17471 +21 +-2.91385 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17471 +20 +-2.91385 +11 +6.17599 +21 +-2.91193 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17599 +20 +-2.91193 +11 +6.17791 +21 +-2.91065 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17791 +20 +-2.91065 +11 +6.18017 +21 +-2.9102 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18017 +20 +-2.9102 +11 +6.19198 +21 +-2.9102 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19198 +20 +-2.9102 +11 +6.19424 +21 +-2.91065 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44424 +20 +-2.71577 +11 +6.44616 +21 +-2.71705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44616 +20 +-2.71705 +11 +6.44744 +21 +-2.71897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44744 +20 +-2.71897 +11 +6.44789 +21 +-2.72123 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44789 +20 +-2.72123 +11 +6.44789 +21 +-2.78619 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44789 +20 +-2.78619 +11 +6.44744 +21 +-2.78845 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44744 +20 +-2.78845 +11 +6.44616 +21 +-2.79036 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44616 +20 +-2.79036 +11 +6.44424 +21 +-2.79164 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44424 +20 +-2.79164 +11 +6.44395 +21 +-2.7917 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44395 +20 +-2.7917 +11 +6.44395 +21 +-2.9106 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44395 +20 +-2.9106 +11 +6.44424 +21 +-2.91065 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44424 +20 +-2.91065 +11 +6.44616 +21 +-2.91193 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44616 +20 +-2.91193 +11 +6.44744 +21 +-2.91385 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44744 +20 +-2.91385 +11 +6.44789 +21 +-2.91611 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44789 +20 +-2.91611 +11 +6.44789 +21 +-2.98107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44789 +20 +-2.98107 +11 +6.44744 +21 +-2.98333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44744 +20 +-2.98333 +11 +6.44616 +21 +-2.98525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44616 +20 +-2.98525 +11 +6.44424 +21 +-2.98653 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44424 +20 +-2.98653 +11 +6.44395 +21 +-2.98658 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44395 +20 +-2.98658 +11 +6.44395 +21 +-3.01449 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44395 +20 +-3.01449 +11 +6.45953 +21 +-3.03006 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45953 +20 +-3.03006 +11 +6.48678 +21 +-3.03006 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48678 +20 +-3.03006 +11 +6.49054 +21 +-3.03081 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49054 +20 +-3.03081 +11 +6.49374 +21 +-3.03295 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49374 +20 +-3.03295 +11 +6.49587 +21 +-3.03614 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49587 +20 +-3.03614 +11 +6.49662 +21 +-3.03991 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49662 +20 +-3.03991 +11 +6.49662 +21 +-3.05959 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49662 +20 +-3.05959 +11 +6.49587 +21 +-3.06336 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49587 +20 +-3.06336 +11 +6.49374 +21 +-3.06655 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49374 +20 +-3.06655 +11 +6.49054 +21 +-3.06868 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49054 +20 +-3.06868 +11 +6.48678 +21 +-3.06943 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48678 +20 +-3.06943 +11 +6.44937 +21 +-3.06943 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44937 +20 +-3.06943 +11 +6.44561 +21 +-3.06868 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44561 +20 +-3.06868 +11 +6.44241 +21 +-3.06655 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44241 +20 +-3.06655 +11 +6.44028 +21 +-3.06336 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44028 +20 +-3.06336 +11 +6.43953 +21 +-3.05959 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43953 +20 +-3.05959 +11 +6.43953 +21 +-3.03991 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43953 +20 +-3.03991 +11 +6.44028 +21 +-3.03614 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44028 +20 +-3.03614 +11 +6.4415 +21 +-3.03431 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4415 +20 +-3.03431 +11 +6.43051 +21 +-3.02332 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43051 +20 +-3.02332 +11 +6.4298 +21 +-3.0222 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4298 +20 +-3.0222 +11 +6.42898 +21 +-3.02116 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42898 +20 +-3.02116 +11 +6.42888 +21 +-3.02073 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42888 +20 +-3.02073 +11 +6.42864 +21 +-3.02035 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42864 +20 +-3.02035 +11 +6.42849 +21 +-3.01904 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42849 +20 +-3.01904 +11 +6.4282 +21 +-3.01775 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4282 +20 +-3.01775 +11 +6.4282 +21 +-2.98658 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4282 +20 +-2.98658 +11 +6.42791 +21 +-2.98653 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42791 +20 +-2.98653 +11 +6.42599 +21 +-2.98525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42599 +20 +-2.98525 +11 +6.42471 +21 +-2.98333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42471 +20 +-2.98333 +11 +6.42426 +21 +-2.98107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42426 +20 +-2.98107 +11 +6.42426 +21 +-2.91611 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42426 +20 +-2.91611 +11 +6.42471 +21 +-2.91385 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42471 +20 +-2.91385 +11 +6.42599 +21 +-2.91193 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42599 +20 +-2.91193 +11 +6.42791 +21 +-2.91065 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42791 +20 +-2.91065 +11 +6.4282 +21 +-2.9106 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4282 +20 +-2.9106 +11 +6.4282 +21 +-2.7917 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4282 +20 +-2.7917 +11 +6.42791 +21 +-2.79164 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42791 +20 +-2.79164 +11 +6.42599 +21 +-2.79036 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42599 +20 +-2.79036 +11 +6.42471 +21 +-2.78845 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42471 +20 +-2.78845 +11 +6.42426 +21 +-2.78619 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42426 +20 +-2.78619 +11 +6.42426 +21 +-2.72123 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42426 +20 +-2.72123 +11 +6.42471 +21 +-2.71897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42471 +20 +-2.71897 +11 +6.42599 +21 +-2.71705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42599 +20 +-2.71705 +11 +6.42791 +21 +-2.71577 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42791 +20 +-2.71577 +11 +6.43017 +21 +-2.71532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43017 +20 +-2.71532 +11 +6.44198 +21 +-2.71532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44198 +20 +-2.71532 +11 +6.44424 +21 +-2.71577 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34424 +20 +-2.91065 +11 +6.34616 +21 +-2.91193 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34616 +20 +-2.91193 +11 +6.34744 +21 +-2.91385 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34744 +20 +-2.91385 +11 +6.34789 +21 +-2.91611 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34789 +20 +-2.91611 +11 +6.34789 +21 +-2.94072 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34789 +20 +-2.94072 +11 +6.37426 +21 +-2.94072 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37426 +20 +-2.94072 +11 +6.37426 +21 +-2.91611 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37426 +20 +-2.91611 +11 +6.37471 +21 +-2.91385 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37471 +20 +-2.91385 +11 +6.37599 +21 +-2.91193 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37599 +20 +-2.91193 +11 +6.37791 +21 +-2.91065 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37791 +20 +-2.91065 +11 +6.38017 +21 +-2.9102 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38017 +20 +-2.9102 +11 +6.39198 +21 +-2.9102 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39198 +20 +-2.9102 +11 +6.39424 +21 +-2.91065 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39424 +20 +-2.91065 +11 +6.39616 +21 +-2.91193 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39616 +20 +-2.91193 +11 +6.39744 +21 +-2.91385 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39744 +20 +-2.91385 +11 +6.39789 +21 +-2.91611 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39789 +20 +-2.91611 +11 +6.39789 +21 +-2.98107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39789 +20 +-2.98107 +11 +6.39744 +21 +-2.98333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39744 +20 +-2.98333 +11 +6.39695 +21 +-2.98406 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39695 +20 +-2.98406 +11 +6.39695 +21 +-3.02966 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39695 +20 +-3.02966 +11 +6.40778 +21 +-3.02966 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40778 +20 +-3.02966 +11 +6.41154 +21 +-3.03041 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41154 +20 +-3.03041 +11 +6.41474 +21 +-3.03254 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41474 +20 +-3.03254 +11 +6.41687 +21 +-3.03574 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41687 +20 +-3.03574 +11 +6.41762 +21 +-3.0395 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41762 +20 +-3.0395 +11 +6.41762 +21 +-3.05919 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41762 +20 +-3.05919 +11 +6.41687 +21 +-3.06296 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41687 +20 +-3.06296 +11 +6.41474 +21 +-3.06615 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41474 +20 +-3.06615 +11 +6.41154 +21 +-3.06828 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41154 +20 +-3.06828 +11 +6.40778 +21 +-3.06903 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40778 +20 +-3.06903 +11 +6.37037 +21 +-3.06903 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37037 +20 +-3.06903 +11 +6.36661 +21 +-3.06828 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36661 +20 +-3.06828 +11 +6.36341 +21 +-3.06615 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36341 +20 +-3.06615 +11 +6.36128 +21 +-3.06296 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36128 +20 +-3.06296 +11 +6.36053 +21 +-3.05919 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36053 +20 +-3.05919 +11 +6.36053 +21 +-3.0395 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36053 +20 +-3.0395 +11 +6.36128 +21 +-3.03574 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36128 +20 +-3.03574 +11 +6.36341 +21 +-3.03254 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36341 +20 +-3.03254 +11 +6.36661 +21 +-3.03041 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36661 +20 +-3.03041 +11 +6.37037 +21 +-3.02966 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37037 +20 +-3.02966 +11 +6.3812 +21 +-3.02966 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3812 +20 +-3.02966 +11 +6.3812 +21 +-2.98698 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3812 +20 +-2.98698 +11 +6.38017 +21 +-2.98698 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38017 +20 +-2.98698 +11 +6.37791 +21 +-2.98653 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37791 +20 +-2.98653 +11 +6.37599 +21 +-2.98525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37599 +20 +-2.98525 +11 +6.37471 +21 +-2.98333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37471 +20 +-2.98333 +11 +6.37426 +21 +-2.98107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37426 +20 +-2.98107 +11 +6.37426 +21 +-2.95646 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37426 +20 +-2.95646 +11 +6.34789 +21 +-2.95646 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34789 +20 +-2.95646 +11 +6.34789 +21 +-2.98107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34789 +20 +-2.98107 +11 +6.34744 +21 +-2.98333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34744 +20 +-2.98333 +11 +6.34616 +21 +-2.98525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34616 +20 +-2.98525 +11 +6.34424 +21 +-2.98653 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34424 +20 +-2.98653 +11 +6.34198 +21 +-2.98698 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34198 +20 +-2.98698 +11 +6.33017 +21 +-2.98698 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33017 +20 +-2.98698 +11 +6.32791 +21 +-2.98653 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32791 +20 +-2.98653 +11 +6.32599 +21 +-2.98525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32599 +20 +-2.98525 +11 +6.32471 +21 +-2.98333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32471 +20 +-2.98333 +11 +6.32426 +21 +-2.98107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32426 +20 +-2.98107 +11 +6.32426 +21 +-2.91611 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32426 +20 +-2.91611 +11 +6.32471 +21 +-2.91385 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32471 +20 +-2.91385 +11 +6.32599 +21 +-2.91193 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32599 +20 +-2.91193 +11 +6.32791 +21 +-2.91065 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32791 +20 +-2.91065 +11 +6.33017 +21 +-2.9102 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33017 +20 +-2.9102 +11 +6.34198 +21 +-2.9102 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34198 +20 +-2.9102 +11 +6.34424 +21 +-2.91065 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24424 +20 +-2.91065 +11 +6.24616 +21 +-2.91193 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24616 +20 +-2.91193 +11 +6.24744 +21 +-2.91385 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24744 +20 +-2.91385 +11 +6.24789 +21 +-2.91611 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24789 +20 +-2.91611 +11 +6.24789 +21 +-2.94072 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24789 +20 +-2.94072 +11 +6.27426 +21 +-2.94072 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27426 +20 +-2.94072 +11 +6.27426 +21 +-2.91611 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27426 +20 +-2.91611 +11 +6.27471 +21 +-2.91385 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27471 +20 +-2.91385 +11 +6.27599 +21 +-2.91193 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27599 +20 +-2.91193 +11 +6.27791 +21 +-2.91065 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27791 +20 +-2.91065 +11 +6.28017 +21 +-2.9102 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28017 +20 +-2.9102 +11 +6.29198 +21 +-2.9102 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29198 +20 +-2.9102 +11 +6.29424 +21 +-2.91065 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29424 +20 +-2.91065 +11 +6.29616 +21 +-2.91193 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29616 +20 +-2.91193 +11 +6.29744 +21 +-2.91385 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29744 +20 +-2.91385 +11 +6.29789 +21 +-2.91611 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29789 +20 +-2.91611 +11 +6.29789 +21 +-2.98107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29789 +20 +-2.98107 +11 +6.29744 +21 +-2.98333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29744 +20 +-2.98333 +11 +6.29616 +21 +-2.98525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29616 +20 +-2.98525 +11 +6.29424 +21 +-2.98653 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29424 +20 +-2.98653 +11 +6.29198 +21 +-2.98698 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29198 +20 +-2.98698 +11 +6.28017 +21 +-2.98698 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28017 +20 +-2.98698 +11 +6.27791 +21 +-2.98653 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27791 +20 +-2.98653 +11 +6.27599 +21 +-2.98525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27599 +20 +-2.98525 +11 +6.27471 +21 +-2.98333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27471 +20 +-2.98333 +11 +6.27426 +21 +-2.98107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27426 +20 +-2.98107 +11 +6.27426 +21 +-2.95646 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27426 +20 +-2.95646 +11 +6.24789 +21 +-2.95646 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24789 +20 +-2.95646 +11 +6.24789 +21 +-2.98107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24789 +20 +-2.98107 +11 +6.24744 +21 +-2.98333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24744 +20 +-2.98333 +11 +6.24616 +21 +-2.98525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24616 +20 +-2.98525 +11 +6.24424 +21 +-2.98653 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24424 +20 +-2.98653 +11 +6.24395 +21 +-2.98658 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24395 +20 +-2.98658 +11 +6.24395 +21 +-3.00759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24395 +20 +-3.00759 +11 +6.24533 +21 +-3.00759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24533 +20 +-3.00759 +11 +6.2491 +21 +-3.00834 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2491 +20 +-3.00834 +11 +6.25229 +21 +-3.01047 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25229 +20 +-3.01047 +11 +6.25443 +21 +-3.01367 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25443 +20 +-3.01367 +11 +6.25518 +21 +-3.01743 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25518 +20 +-3.01743 +11 +6.25518 +21 +-3.04147 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25518 +20 +-3.04147 +11 +6.28053 +21 +-3.04147 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28053 +20 +-3.04147 +11 +6.28053 +21 +-3.0395 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28053 +20 +-3.0395 +11 +6.28128 +21 +-3.03574 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28128 +20 +-3.03574 +11 +6.28341 +21 +-3.03254 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28341 +20 +-3.03254 +11 +6.28661 +21 +-3.03041 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28661 +20 +-3.03041 +11 +6.29037 +21 +-3.02966 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29037 +20 +-3.02966 +11 +6.32778 +21 +-3.02966 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32778 +20 +-3.02966 +11 +6.33154 +21 +-3.03041 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33154 +20 +-3.03041 +11 +6.33474 +21 +-3.03254 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33474 +20 +-3.03254 +11 +6.33687 +21 +-3.03574 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33687 +20 +-3.03574 +11 +6.33762 +21 +-3.0395 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33762 +20 +-3.0395 +11 +6.33762 +21 +-3.05919 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33762 +20 +-3.05919 +11 +6.33687 +21 +-3.06296 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33687 +20 +-3.06296 +11 +6.33474 +21 +-3.06615 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33474 +20 +-3.06615 +11 +6.33154 +21 +-3.06828 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33154 +20 +-3.06828 +11 +6.32778 +21 +-3.06903 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32778 +20 +-3.06903 +11 +6.29037 +21 +-3.06903 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29037 +20 +-3.06903 +11 +6.28661 +21 +-3.06828 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28661 +20 +-3.06828 +11 +6.28341 +21 +-3.06615 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28341 +20 +-3.06615 +11 +6.28128 +21 +-3.06296 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28128 +20 +-3.06296 +11 +6.28053 +21 +-3.05919 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28053 +20 +-3.05919 +11 +6.28053 +21 +-3.05722 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28053 +20 +-3.05722 +11 +6.25404 +21 +-3.05722 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25404 +20 +-3.05722 +11 +6.25229 +21 +-3.05983 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25229 +20 +-3.05983 +11 +6.2491 +21 +-3.06196 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2491 +20 +-3.06196 +11 +6.24533 +21 +-3.06271 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24533 +20 +-3.06271 +11 +6.22467 +21 +-3.06271 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22467 +20 +-3.06271 +11 +6.2209 +21 +-3.06196 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2209 +20 +-3.06196 +11 +6.21771 +21 +-3.05983 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21771 +20 +-3.05983 +11 +6.21557 +21 +-3.05663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21557 +20 +-3.05663 +11 +6.21482 +21 +-3.05287 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21482 +20 +-3.05287 +11 +6.21482 +21 +-3.01743 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21482 +20 +-3.01743 +11 +6.21557 +21 +-3.01367 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21557 +20 +-3.01367 +11 +6.21771 +21 +-3.01047 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21771 +20 +-3.01047 +11 +6.2209 +21 +-3.00834 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2209 +20 +-3.00834 +11 +6.22467 +21 +-3.00759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22467 +20 +-3.00759 +11 +6.2282 +21 +-3.00759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2282 +20 +-3.00759 +11 +6.2282 +21 +-2.98658 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2282 +20 +-2.98658 +11 +6.22791 +21 +-2.98653 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22791 +20 +-2.98653 +11 +6.22599 +21 +-2.98525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22599 +20 +-2.98525 +11 +6.22471 +21 +-2.98333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22471 +20 +-2.98333 +11 +6.22426 +21 +-2.98107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22426 +20 +-2.98107 +11 +6.22426 +21 +-2.91611 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22426 +20 +-2.91611 +11 +6.22471 +21 +-2.91385 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22471 +20 +-2.91385 +11 +6.22599 +21 +-2.91193 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22599 +20 +-2.91193 +11 +6.22791 +21 +-2.91065 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22791 +20 +-2.91065 +11 +6.23017 +21 +-2.9102 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23017 +20 +-2.9102 +11 +6.24198 +21 +-2.9102 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24198 +20 +-2.9102 +11 +6.24424 +21 +-2.91065 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58861 +20 +-2.67102 +11 +6.5918 +21 +-2.67316 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5918 +20 +-2.67316 +11 +6.59394 +21 +-2.67635 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59394 +20 +-2.67635 +11 +6.59469 +21 +-2.68012 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59469 +20 +-2.68012 +11 +6.59469 +21 +-2.68209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59469 +20 +-2.68209 +11 +6.59921 +21 +-2.68209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59921 +20 +-2.68209 +11 +6.6005 +21 +-2.68238 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6005 +20 +-2.68238 +11 +6.60181 +21 +-2.68253 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60181 +20 +-2.68253 +11 +6.60219 +21 +-2.68277 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60219 +20 +-2.68277 +11 +6.60263 +21 +-2.68287 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60263 +20 +-2.68287 +11 +6.60366 +21 +-2.68369 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60366 +20 +-2.68369 +11 +6.60478 +21 +-2.68439 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60478 +20 +-2.68439 +11 +6.63557 +21 +-2.71518 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63557 +20 +-2.71518 +11 +6.63627 +21 +-2.7163 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63627 +20 +-2.7163 +11 +6.63709 +21 +-2.71733 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63709 +20 +-2.71733 +11 +6.63719 +21 +-2.71777 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63719 +20 +-2.71777 +11 +6.63743 +21 +-2.71815 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63743 +20 +-2.71815 +11 +6.63758 +21 +-2.71946 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63758 +20 +-2.71946 +11 +6.63787 +21 +-2.72075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63787 +20 +-2.72075 +11 +6.63787 +21 +-2.79075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63787 +20 +-2.79075 +11 +6.63758 +21 +-2.79204 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63758 +20 +-2.79204 +11 +6.63743 +21 +-2.79335 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63743 +20 +-2.79335 +11 +6.63719 +21 +-2.79373 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63719 +20 +-2.79373 +11 +6.63709 +21 +-2.79416 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63709 +20 +-2.79416 +11 +6.63627 +21 +-2.7952 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63627 +20 +-2.7952 +11 +6.63557 +21 +-2.79632 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63557 +20 +-2.79632 +11 +6.59576 +21 +-2.83612 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59576 +20 +-2.83612 +11 +6.59465 +21 +-2.83682 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59465 +20 +-2.83682 +11 +6.59361 +21 +-2.83765 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59361 +20 +-2.83765 +11 +6.59318 +21 +-2.83775 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59318 +20 +-2.83775 +11 +6.5928 +21 +-2.83798 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5928 +20 +-2.83798 +11 +6.59148 +21 +-2.83813 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59148 +20 +-2.83813 +11 +6.5902 +21 +-2.83843 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5902 +20 +-2.83843 +11 +6.58562 +21 +-2.83843 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58562 +20 +-2.83843 +11 +6.58562 +21 +-2.84039 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58562 +20 +-2.84039 +11 +6.58487 +21 +-2.84416 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58487 +20 +-2.84416 +11 +6.58274 +21 +-2.84735 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58274 +20 +-2.84735 +11 +6.57954 +21 +-2.84949 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57954 +20 +-2.84949 +11 +6.57578 +21 +-2.85024 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57578 +20 +-2.85024 +11 +6.56995 +21 +-2.85024 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56995 +20 +-2.85024 +11 +6.56995 +21 +-2.88325 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56995 +20 +-2.88325 +11 +6.57192 +21 +-2.88325 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57192 +20 +-2.88325 +11 +6.57568 +21 +-2.884 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57568 +20 +-2.884 +11 +6.57888 +21 +-2.88613 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57888 +20 +-2.88613 +11 +6.58101 +21 +-2.88933 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58101 +20 +-2.88933 +11 +6.58176 +21 +-2.89309 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58176 +20 +-2.89309 +11 +6.58176 +21 +-2.91278 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58176 +20 +-2.91278 +11 +6.58101 +21 +-2.91655 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58101 +20 +-2.91655 +11 +6.57888 +21 +-2.91974 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57888 +20 +-2.91974 +11 +6.57568 +21 +-2.92187 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57568 +20 +-2.92187 +11 +6.57192 +21 +-2.92262 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57192 +20 +-2.92262 +11 +6.55223 +21 +-2.92262 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55223 +20 +-2.92262 +11 +6.54847 +21 +-2.92187 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54847 +20 +-2.92187 +11 +6.54527 +21 +-2.91974 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54527 +20 +-2.91974 +11 +6.54314 +21 +-2.91655 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54314 +20 +-2.91655 +11 +6.54239 +21 +-2.91278 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54239 +20 +-2.91278 +11 +6.54239 +21 +-2.89309 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54239 +20 +-2.89309 +11 +6.54314 +21 +-2.88933 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54314 +20 +-2.88933 +11 +6.54527 +21 +-2.88613 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54527 +20 +-2.88613 +11 +6.54847 +21 +-2.884 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54847 +20 +-2.884 +11 +6.55223 +21 +-2.88325 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55223 +20 +-2.88325 +11 +6.5542 +21 +-2.88325 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5542 +20 +-2.88325 +11 +6.5542 +21 +-2.85024 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5542 +20 +-2.85024 +11 +6.53837 +21 +-2.85024 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53837 +20 +-2.85024 +11 +6.53461 +21 +-2.84949 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53461 +20 +-2.84949 +11 +6.53141 +21 +-2.84735 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53141 +20 +-2.84735 +11 +6.52928 +21 +-2.84416 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52928 +20 +-2.84416 +11 +6.52853 +21 +-2.84039 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52853 +20 +-2.84039 +11 +6.52853 +21 +-2.82071 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52853 +20 +-2.82071 +11 +6.52928 +21 +-2.81694 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52928 +20 +-2.81694 +11 +6.53141 +21 +-2.81375 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53141 +20 +-2.81375 +11 +6.53461 +21 +-2.81162 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53461 +20 +-2.81162 +11 +6.53837 +21 +-2.81087 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53837 +20 +-2.81087 +11 +6.57578 +21 +-2.81087 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57578 +20 +-2.81087 +11 +6.57954 +21 +-2.81162 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57954 +20 +-2.81162 +11 +6.58274 +21 +-2.81375 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58274 +20 +-2.81375 +11 +6.58487 +21 +-2.81694 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58487 +20 +-2.81694 +11 +6.58562 +21 +-2.82071 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58562 +20 +-2.82071 +11 +6.58562 +21 +-2.82268 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58562 +20 +-2.82268 +11 +6.58694 +21 +-2.82268 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58694 +20 +-2.82268 +11 +6.62213 +21 +-2.78749 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62213 +20 +-2.78749 +11 +6.62213 +21 +-2.72401 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62213 +20 +-2.72401 +11 +6.59595 +21 +-2.69783 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59595 +20 +-2.69783 +11 +6.59469 +21 +-2.69783 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59469 +20 +-2.69783 +11 +6.59469 +21 +-2.6998 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59469 +20 +-2.6998 +11 +6.59394 +21 +-2.70357 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59394 +20 +-2.70357 +11 +6.5918 +21 +-2.70676 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5918 +20 +-2.70676 +11 +6.58861 +21 +-2.7089 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58861 +20 +-2.7089 +11 +6.58484 +21 +-2.70965 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58484 +20 +-2.70965 +11 +6.56516 +21 +-2.70965 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56516 +20 +-2.70965 +11 +6.56139 +21 +-2.7089 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56139 +20 +-2.7089 +11 +6.5582 +21 +-2.70676 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5582 +20 +-2.70676 +11 +6.55606 +21 +-2.70357 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55606 +20 +-2.70357 +11 +6.55531 +21 +-2.6998 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55531 +20 +-2.6998 +11 +6.55531 +21 +-2.68012 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55531 +20 +-2.68012 +11 +6.55606 +21 +-2.67635 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55606 +20 +-2.67635 +11 +6.5582 +21 +-2.67316 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5582 +20 +-2.67316 +11 +6.56139 +21 +-2.67102 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56139 +20 +-2.67102 +11 +6.56516 +21 +-2.67028 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56516 +20 +-2.67028 +11 +6.58484 +21 +-2.67028 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58484 +20 +-2.67028 +11 +6.58861 +21 +-2.67102 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41121 +20 +-2.62795 +11 +6.4144 +21 +-2.63009 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4144 +20 +-2.63009 +11 +6.41653 +21 +-2.63328 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41653 +20 +-2.63328 +11 +6.41728 +21 +-2.63705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41728 +20 +-2.63705 +11 +6.41728 +21 +-2.67445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41728 +20 +-2.67445 +11 +6.41653 +21 +-2.67822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41653 +20 +-2.67822 +11 +6.4144 +21 +-2.68141 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4144 +20 +-2.68141 +11 +6.41121 +21 +-2.68354 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41121 +20 +-2.68354 +11 +6.40744 +21 +-2.68429 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40744 +20 +-2.68429 +11 +6.39395 +21 +-2.68429 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39395 +20 +-2.68429 +11 +6.39395 +21 +-2.71571 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39395 +20 +-2.71571 +11 +6.39424 +21 +-2.71577 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39424 +20 +-2.71577 +11 +6.39616 +21 +-2.71705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39616 +20 +-2.71705 +11 +6.39744 +21 +-2.71897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39744 +20 +-2.71897 +11 +6.39789 +21 +-2.72123 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39789 +20 +-2.72123 +11 +6.39789 +21 +-2.78619 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39789 +20 +-2.78619 +11 +6.39744 +21 +-2.78845 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39744 +20 +-2.78845 +11 +6.39616 +21 +-2.79036 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39616 +20 +-2.79036 +11 +6.39424 +21 +-2.79164 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39424 +20 +-2.79164 +11 +6.39287 +21 +-2.79192 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39287 +20 +-2.79192 +11 +6.39287 +21 +-2.83575 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39287 +20 +-2.83575 +11 +6.39258 +21 +-2.83704 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39258 +20 +-2.83704 +11 +6.39243 +21 +-2.83835 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39243 +20 +-2.83835 +11 +6.39219 +21 +-2.83873 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39219 +20 +-2.83873 +11 +6.39209 +21 +-2.83916 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39209 +20 +-2.83916 +11 +6.39127 +21 +-2.8402 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39127 +20 +-2.8402 +11 +6.39057 +21 +-2.84132 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39057 +20 +-2.84132 +11 +6.38057 +21 +-2.85132 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38057 +20 +-2.85132 +11 +6.37945 +21 +-2.85202 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37945 +20 +-2.85202 +11 +6.37842 +21 +-2.85284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37842 +20 +-2.85284 +11 +6.37798 +21 +-2.85294 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37798 +20 +-2.85294 +11 +6.3776 +21 +-2.85318 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3776 +20 +-2.85318 +11 +6.37629 +21 +-2.85333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37629 +20 +-2.85333 +11 +6.375 +21 +-2.85362 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.375 +20 +-2.85362 +11 +6.245 +21 +-2.85362 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.245 +20 +-2.85362 +11 +6.24371 +21 +-2.85333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24371 +20 +-2.85333 +11 +6.2424 +21 +-2.85318 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2424 +20 +-2.85318 +11 +6.24202 +21 +-2.85294 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24202 +20 +-2.85294 +11 +6.24158 +21 +-2.85284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24158 +20 +-2.85284 +11 +6.24055 +21 +-2.85202 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24055 +20 +-2.85202 +11 +6.23943 +21 +-2.85132 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23943 +20 +-2.85132 +11 +6.23051 +21 +-2.84239 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23051 +20 +-2.84239 +11 +6.2298 +21 +-2.84127 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2298 +20 +-2.84127 +11 +6.22898 +21 +-2.84024 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22898 +20 +-2.84024 +11 +6.22888 +21 +-2.8398 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22888 +20 +-2.8398 +11 +6.22864 +21 +-2.83942 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22864 +20 +-2.83942 +11 +6.22849 +21 +-2.83811 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22849 +20 +-2.83811 +11 +6.2282 +21 +-2.83682 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2282 +20 +-2.83682 +11 +6.2282 +21 +-2.7917 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2282 +20 +-2.7917 +11 +6.22791 +21 +-2.79164 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22791 +20 +-2.79164 +11 +6.22599 +21 +-2.79036 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22599 +20 +-2.79036 +11 +6.22471 +21 +-2.78845 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22471 +20 +-2.78845 +11 +6.22426 +21 +-2.78619 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22426 +20 +-2.78619 +11 +6.22426 +21 +-2.72123 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22426 +20 +-2.72123 +11 +6.22471 +21 +-2.71897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22471 +20 +-2.71897 +11 +6.22599 +21 +-2.71705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22599 +20 +-2.71705 +11 +6.22791 +21 +-2.71577 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22791 +20 +-2.71577 +11 +6.23017 +21 +-2.71532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23017 +20 +-2.71532 +11 +6.24198 +21 +-2.71532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24198 +20 +-2.71532 +11 +6.24424 +21 +-2.71577 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24424 +20 +-2.71577 +11 +6.24616 +21 +-2.71705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24616 +20 +-2.71705 +11 +6.24744 +21 +-2.71897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24744 +20 +-2.71897 +11 +6.24789 +21 +-2.72123 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24789 +20 +-2.72123 +11 +6.24789 +21 +-2.78619 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24789 +20 +-2.78619 +11 +6.24744 +21 +-2.78845 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24744 +20 +-2.78845 +11 +6.24616 +21 +-2.79036 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24616 +20 +-2.79036 +11 +6.24424 +21 +-2.79164 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24424 +20 +-2.79164 +11 +6.24395 +21 +-2.7917 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24395 +20 +-2.7917 +11 +6.24395 +21 +-2.83356 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24395 +20 +-2.83356 +11 +6.24826 +21 +-2.83787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24826 +20 +-2.83787 +11 +6.37174 +21 +-2.83787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37174 +20 +-2.83787 +11 +6.37713 +21 +-2.83249 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37713 +20 +-2.83249 +11 +6.37713 +21 +-2.79112 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37713 +20 +-2.79112 +11 +6.37599 +21 +-2.79036 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37599 +20 +-2.79036 +11 +6.37471 +21 +-2.78845 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37471 +20 +-2.78845 +11 +6.37426 +21 +-2.78619 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37426 +20 +-2.78619 +11 +6.37426 +21 +-2.72123 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37426 +20 +-2.72123 +11 +6.37471 +21 +-2.71897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37471 +20 +-2.71897 +11 +6.37599 +21 +-2.71705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37599 +20 +-2.71705 +11 +6.37791 +21 +-2.71577 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37791 +20 +-2.71577 +11 +6.3782 +21 +-2.71571 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3782 +20 +-2.71571 +11 +6.3782 +21 +-2.67589 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3782 +20 +-2.67589 +11 +6.37791 +21 +-2.67445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37791 +20 +-2.67445 +11 +6.37791 +21 +-2.63705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37791 +20 +-2.63705 +11 +6.37866 +21 +-2.63328 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37866 +20 +-2.63328 +11 +6.3808 +21 +-2.63009 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3808 +20 +-2.63009 +11 +6.38399 +21 +-2.62795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38399 +20 +-2.62795 +11 +6.38776 +21 +-2.6272 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38776 +20 +-2.6272 +11 +6.40744 +21 +-2.6272 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40744 +20 +-2.6272 +11 +6.41121 +21 +-2.62795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59629 +20 +-2.50817 +11 +6.5976 +21 +-2.50832 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5976 +20 +-2.50832 +11 +6.59798 +21 +-2.50855 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59798 +20 +-2.50855 +11 +6.59842 +21 +-2.50865 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59842 +20 +-2.50865 +11 +6.59945 +21 +-2.50948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59945 +20 +-2.50948 +11 +6.60057 +21 +-2.51018 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60057 +20 +-2.51018 +11 +6.63057 +21 +-2.54018 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63057 +20 +-2.54018 +11 +6.63127 +21 +-2.5413 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63127 +20 +-2.5413 +11 +6.63209 +21 +-2.54233 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63209 +20 +-2.54233 +11 +6.63219 +21 +-2.54277 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63219 +20 +-2.54277 +11 +6.63243 +21 +-2.54315 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63243 +20 +-2.54315 +11 +6.63258 +21 +-2.54446 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63258 +20 +-2.54446 +11 +6.63287 +21 +-2.54575 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63287 +20 +-2.54575 +11 +6.63287 +21 +-2.62575 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63287 +20 +-2.62575 +11 +6.63258 +21 +-2.62704 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63258 +20 +-2.62704 +11 +6.63243 +21 +-2.62835 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63243 +20 +-2.62835 +11 +6.63219 +21 +-2.62873 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63219 +20 +-2.62873 +11 +6.63209 +21 +-2.62916 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63209 +20 +-2.62916 +11 +6.63127 +21 +-2.6302 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63127 +20 +-2.6302 +11 +6.63057 +21 +-2.63132 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63057 +20 +-2.63132 +11 +6.61557 +21 +-2.64632 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61557 +20 +-2.64632 +11 +6.61445 +21 +-2.64702 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61445 +20 +-2.64702 +11 +6.61342 +21 +-2.64784 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61342 +20 +-2.64784 +11 +6.61298 +21 +-2.64794 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61298 +20 +-2.64794 +11 +6.6126 +21 +-2.64818 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6126 +20 +-2.64818 +11 +6.61129 +21 +-2.64833 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61129 +20 +-2.64833 +11 +6.61 +21 +-2.64862 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61 +20 +-2.64862 +11 +6.53826 +21 +-2.64862 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53826 +20 +-2.64862 +11 +6.53287 +21 +-2.65401 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53287 +20 +-2.65401 +11 +6.53287 +21 +-2.73797 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53287 +20 +-2.73797 +11 +6.53461 +21 +-2.73681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53461 +20 +-2.73681 +11 +6.53837 +21 +-2.73606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53837 +20 +-2.73606 +11 +6.57578 +21 +-2.73606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57578 +20 +-2.73606 +11 +6.57954 +21 +-2.73681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57954 +20 +-2.73681 +11 +6.58274 +21 +-2.73895 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58274 +20 +-2.73895 +11 +6.58487 +21 +-2.74214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58487 +20 +-2.74214 +11 +6.58562 +21 +-2.74591 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58562 +20 +-2.74591 +11 +6.58562 +21 +-2.76559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58562 +20 +-2.76559 +11 +6.58487 +21 +-2.76936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58487 +20 +-2.76936 +11 +6.58274 +21 +-2.77255 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58274 +20 +-2.77255 +11 +6.57954 +21 +-2.77468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57954 +20 +-2.77468 +11 +6.57578 +21 +-2.77543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57578 +20 +-2.77543 +11 +6.53837 +21 +-2.77543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53837 +20 +-2.77543 +11 +6.53461 +21 +-2.77468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53461 +20 +-2.77468 +11 +6.53141 +21 +-2.77255 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53141 +20 +-2.77255 +11 +6.52928 +21 +-2.76936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52928 +20 +-2.76936 +11 +6.52853 +21 +-2.76559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52853 +20 +-2.76559 +11 +6.52853 +21 +-2.76158 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52853 +20 +-2.76158 +11 +6.49789 +21 +-2.76158 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49789 +20 +-2.76158 +11 +6.49789 +21 +-2.78619 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49789 +20 +-2.78619 +11 +6.49744 +21 +-2.78845 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49744 +20 +-2.78845 +11 +6.49616 +21 +-2.79036 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49616 +20 +-2.79036 +11 +6.49424 +21 +-2.79164 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49424 +20 +-2.79164 +11 +6.49198 +21 +-2.79209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49198 +20 +-2.79209 +11 +6.48017 +21 +-2.79209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48017 +20 +-2.79209 +11 +6.47791 +21 +-2.79164 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47791 +20 +-2.79164 +11 +6.47599 +21 +-2.79036 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47599 +20 +-2.79036 +11 +6.47471 +21 +-2.78845 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47471 +20 +-2.78845 +11 +6.47426 +21 +-2.78619 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47426 +20 +-2.78619 +11 +6.47426 +21 +-2.72123 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47426 +20 +-2.72123 +11 +6.47471 +21 +-2.71897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47471 +20 +-2.71897 +11 +6.47599 +21 +-2.71705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47599 +20 +-2.71705 +11 +6.47791 +21 +-2.71577 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47791 +20 +-2.71577 +11 +6.48017 +21 +-2.71532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48017 +20 +-2.71532 +11 +6.49198 +21 +-2.71532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49198 +20 +-2.71532 +11 +6.49424 +21 +-2.71577 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49424 +20 +-2.71577 +11 +6.49616 +21 +-2.71705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49616 +20 +-2.71705 +11 +6.49744 +21 +-2.71897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49744 +20 +-2.71897 +11 +6.49789 +21 +-2.72123 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49789 +20 +-2.72123 +11 +6.49789 +21 +-2.74583 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49789 +20 +-2.74583 +11 +6.51674 +21 +-2.74583 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51674 +20 +-2.74583 +11 +6.51713 +21 +-2.74545 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51713 +20 +-2.74545 +11 +6.51713 +21 +-2.65075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51713 +20 +-2.65075 +11 +6.51742 +21 +-2.64946 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51742 +20 +-2.64946 +11 +6.51757 +21 +-2.64815 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51757 +20 +-2.64815 +11 +6.51781 +21 +-2.64777 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51781 +20 +-2.64777 +11 +6.51791 +21 +-2.64733 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51791 +20 +-2.64733 +11 +6.51873 +21 +-2.6463 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51873 +20 +-2.6463 +11 +6.51943 +21 +-2.64518 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51943 +20 +-2.64518 +11 +6.52943 +21 +-2.63518 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52943 +20 +-2.63518 +11 +6.53055 +21 +-2.63448 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53055 +20 +-2.63448 +11 +6.53158 +21 +-2.63365 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53158 +20 +-2.63365 +11 +6.53202 +21 +-2.63355 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53202 +20 +-2.63355 +11 +6.5324 +21 +-2.63332 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5324 +20 +-2.63332 +11 +6.53371 +21 +-2.63317 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53371 +20 +-2.63317 +11 +6.535 +21 +-2.63287 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.535 +20 +-2.63287 +11 +6.60674 +21 +-2.63287 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60674 +20 +-2.63287 +11 +6.61713 +21 +-2.62249 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61713 +20 +-2.62249 +11 +6.61713 +21 +-2.54901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61713 +20 +-2.54901 +11 +6.59174 +21 +-2.52362 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59174 +20 +-2.52362 +11 +6.45103 +21 +-2.52362 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45103 +20 +-2.52362 +11 +6.42787 +21 +-2.54678 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42787 +20 +-2.54678 +11 +6.42787 +21 +-2.58575 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42787 +20 +-2.58575 +11 +6.42758 +21 +-2.58704 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42758 +20 +-2.58704 +11 +6.42743 +21 +-2.58835 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42743 +20 +-2.58835 +11 +6.42719 +21 +-2.58873 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42719 +20 +-2.58873 +11 +6.42709 +21 +-2.58916 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42709 +20 +-2.58916 +11 +6.42627 +21 +-2.5902 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42627 +20 +-2.5902 +11 +6.42557 +21 +-2.59132 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42557 +20 +-2.59132 +11 +6.4162 +21 +-2.60069 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4162 +20 +-2.60069 +11 +6.41508 +21 +-2.60139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41508 +20 +-2.60139 +11 +6.41405 +21 +-2.60221 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41405 +20 +-2.60221 +11 +6.41361 +21 +-2.60231 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41361 +20 +-2.60231 +11 +6.41323 +21 +-2.60255 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41323 +20 +-2.60255 +11 +6.41192 +21 +-2.6027 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41192 +20 +-2.6027 +11 +6.41063 +21 +-2.60299 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41063 +20 +-2.60299 +11 +6.37389 +21 +-2.60299 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37389 +20 +-2.60299 +11 +6.34395 +21 +-2.63293 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34395 +20 +-2.63293 +11 +6.34395 +21 +-2.71571 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34395 +20 +-2.71571 +11 +6.34424 +21 +-2.71577 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34424 +20 +-2.71577 +11 +6.34616 +21 +-2.71705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34616 +20 +-2.71705 +11 +6.34744 +21 +-2.71897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34744 +20 +-2.71897 +11 +6.34789 +21 +-2.72123 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34789 +20 +-2.72123 +11 +6.34789 +21 +-2.78619 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34789 +20 +-2.78619 +11 +6.34744 +21 +-2.78845 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34744 +20 +-2.78845 +11 +6.34616 +21 +-2.79036 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34616 +20 +-2.79036 +11 +6.34424 +21 +-2.79164 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34424 +20 +-2.79164 +11 +6.34198 +21 +-2.79209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34198 +20 +-2.79209 +11 +6.33017 +21 +-2.79209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33017 +20 +-2.79209 +11 +6.32791 +21 +-2.79164 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32791 +20 +-2.79164 +11 +6.32599 +21 +-2.79036 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32599 +20 +-2.79036 +11 +6.32471 +21 +-2.78845 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32471 +20 +-2.78845 +11 +6.32426 +21 +-2.78619 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32426 +20 +-2.78619 +11 +6.32426 +21 +-2.72123 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32426 +20 +-2.72123 +11 +6.32471 +21 +-2.71897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32471 +20 +-2.71897 +11 +6.32599 +21 +-2.71705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32599 +20 +-2.71705 +11 +6.32791 +21 +-2.71577 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32791 +20 +-2.71577 +11 +6.3282 +21 +-2.71571 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3282 +20 +-2.71571 +11 +6.3282 +21 +-2.62967 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3282 +20 +-2.62967 +11 +6.32849 +21 +-2.62839 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32849 +20 +-2.62839 +11 +6.32864 +21 +-2.62707 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32864 +20 +-2.62707 +11 +6.32888 +21 +-2.62669 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32888 +20 +-2.62669 +11 +6.32898 +21 +-2.62626 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32898 +20 +-2.62626 +11 +6.3298 +21 +-2.62522 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3298 +20 +-2.62522 +11 +6.33051 +21 +-2.62411 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33051 +20 +-2.62411 +11 +6.36506 +21 +-2.58955 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36506 +20 +-2.58955 +11 +6.36618 +21 +-2.58885 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36618 +20 +-2.58885 +11 +6.36721 +21 +-2.58802 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36721 +20 +-2.58802 +11 +6.36765 +21 +-2.58792 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36765 +20 +-2.58792 +11 +6.36803 +21 +-2.58769 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36803 +20 +-2.58769 +11 +6.36934 +21 +-2.58754 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36934 +20 +-2.58754 +11 +6.37063 +21 +-2.58724 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37063 +20 +-2.58724 +11 +6.40737 +21 +-2.58724 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40737 +20 +-2.58724 +11 +6.41213 +21 +-2.58249 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41213 +20 +-2.58249 +11 +6.41213 +21 +-2.54352 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41213 +20 +-2.54352 +11 +6.41242 +21 +-2.54223 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41242 +20 +-2.54223 +11 +6.41257 +21 +-2.54092 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41257 +20 +-2.54092 +11 +6.41281 +21 +-2.54054 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41281 +20 +-2.54054 +11 +6.41291 +21 +-2.5401 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41291 +20 +-2.5401 +11 +6.41373 +21 +-2.53907 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41373 +20 +-2.53907 +11 +6.41443 +21 +-2.53795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41443 +20 +-2.53795 +11 +6.4422 +21 +-2.51018 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4422 +20 +-2.51018 +11 +6.44332 +21 +-2.50948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44332 +20 +-2.50948 +11 +6.44435 +21 +-2.50865 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44435 +20 +-2.50865 +11 +6.44479 +21 +-2.50855 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44479 +20 +-2.50855 +11 +6.44517 +21 +-2.50832 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44517 +20 +-2.50832 +11 +6.44648 +21 +-2.50817 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44648 +20 +-2.50817 +11 +6.44777 +21 +-2.50787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44777 +20 +-2.50787 +11 +6.595 +21 +-2.50787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.595 +20 +-2.50787 +11 +6.59629 +21 +-2.50817 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29747 +20 +-2.64921 +11 +6.30066 +21 +-2.65135 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30066 +20 +-2.65135 +11 +6.30279 +21 +-2.65454 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30279 +20 +-2.65454 +11 +6.30354 +21 +-2.65831 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30354 +20 +-2.65831 +11 +6.30354 +21 +-2.67799 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30354 +20 +-2.67799 +11 +6.30279 +21 +-2.68176 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30279 +20 +-2.68176 +11 +6.30066 +21 +-2.68495 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30066 +20 +-2.68495 +11 +6.29747 +21 +-2.68709 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29747 +20 +-2.68709 +11 +6.29395 +21 +-2.68779 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29395 +20 +-2.68779 +11 +6.29395 +21 +-2.71571 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29395 +20 +-2.71571 +11 +6.29424 +21 +-2.71577 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29424 +20 +-2.71577 +11 +6.29616 +21 +-2.71705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29616 +20 +-2.71705 +11 +6.29744 +21 +-2.71897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29744 +20 +-2.71897 +11 +6.29789 +21 +-2.72123 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29789 +20 +-2.72123 +11 +6.29789 +21 +-2.78619 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29789 +20 +-2.78619 +11 +6.29744 +21 +-2.78845 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29744 +20 +-2.78845 +11 +6.29616 +21 +-2.79036 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29616 +20 +-2.79036 +11 +6.29424 +21 +-2.79164 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29424 +20 +-2.79164 +11 +6.29198 +21 +-2.79209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29198 +20 +-2.79209 +11 +6.28017 +21 +-2.79209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28017 +20 +-2.79209 +11 +6.27791 +21 +-2.79164 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27791 +20 +-2.79164 +11 +6.27599 +21 +-2.79036 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27599 +20 +-2.79036 +11 +6.27471 +21 +-2.78845 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27471 +20 +-2.78845 +11 +6.27426 +21 +-2.78619 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27426 +20 +-2.78619 +11 +6.27426 +21 +-2.72123 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27426 +20 +-2.72123 +11 +6.27471 +21 +-2.71897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27471 +20 +-2.71897 +11 +6.27599 +21 +-2.71705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27599 +20 +-2.71705 +11 +6.27791 +21 +-2.71577 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27791 +20 +-2.71577 +11 +6.2782 +21 +-2.71571 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2782 +20 +-2.71571 +11 +6.2782 +21 +-2.68783 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2782 +20 +-2.68783 +11 +6.2563 +21 +-2.68783 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2563 +20 +-2.68783 +11 +6.25253 +21 +-2.68709 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25253 +20 +-2.68709 +11 +6.24934 +21 +-2.68495 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24934 +20 +-2.68495 +11 +6.24721 +21 +-2.68176 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24721 +20 +-2.68176 +11 +6.24646 +21 +-2.67799 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24646 +20 +-2.67799 +11 +6.24646 +21 +-2.65831 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24646 +20 +-2.65831 +11 +6.24721 +21 +-2.65454 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24721 +20 +-2.65454 +11 +6.24934 +21 +-2.65135 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24934 +20 +-2.65135 +11 +6.25253 +21 +-2.64921 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25253 +20 +-2.64921 +11 +6.2563 +21 +-2.64846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2563 +20 +-2.64846 +11 +6.2937 +21 +-2.64846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2937 +20 +-2.64846 +11 +6.29747 +21 +-2.64921 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10305 +20 +-2.63176 +11 +6.11044 +21 +-2.634 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11044 +20 +-2.634 +11 +6.11725 +21 +-2.63764 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11725 +20 +-2.63764 +11 +6.12321 +21 +-2.64254 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12321 +20 +-2.64254 +11 +6.12811 +21 +-2.6485 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12811 +20 +-2.6485 +11 +6.13175 +21 +-2.65531 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13175 +20 +-2.65531 +11 +6.13399 +21 +-2.66269 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13399 +20 +-2.66269 +11 +6.13474 +21 +-2.67037 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13474 +20 +-2.67037 +11 +6.13399 +21 +-2.67805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13399 +20 +-2.67805 +11 +6.13175 +21 +-2.68544 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13175 +20 +-2.68544 +11 +6.12811 +21 +-2.69225 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12811 +20 +-2.69225 +11 +6.12395 +21 +-2.69732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12395 +20 +-2.69732 +11 +6.12395 +21 +-2.73306 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12395 +20 +-2.73306 +11 +6.13478 +21 +-2.73306 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13478 +20 +-2.73306 +11 +6.13854 +21 +-2.73381 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13854 +20 +-2.73381 +11 +6.14174 +21 +-2.73595 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14174 +20 +-2.73595 +11 +6.14387 +21 +-2.73914 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14387 +20 +-2.73914 +11 +6.14462 +21 +-2.74291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14462 +20 +-2.74291 +11 +6.14462 +21 +-2.74583 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14462 +20 +-2.74583 +11 +6.17426 +21 +-2.74583 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17426 +20 +-2.74583 +11 +6.17426 +21 +-2.72123 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17426 +20 +-2.72123 +11 +6.17471 +21 +-2.71897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17471 +20 +-2.71897 +11 +6.17599 +21 +-2.71705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17599 +20 +-2.71705 +11 +6.17791 +21 +-2.71577 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17791 +20 +-2.71577 +11 +6.18017 +21 +-2.71532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18017 +20 +-2.71532 +11 +6.19198 +21 +-2.71532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19198 +20 +-2.71532 +11 +6.19424 +21 +-2.71577 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19424 +20 +-2.71577 +11 +6.19616 +21 +-2.71705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19616 +20 +-2.71705 +11 +6.19744 +21 +-2.71897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19744 +20 +-2.71897 +11 +6.19789 +21 +-2.72123 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19789 +20 +-2.72123 +11 +6.19789 +21 +-2.78619 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19789 +20 +-2.78619 +11 +6.19744 +21 +-2.78845 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19744 +20 +-2.78845 +11 +6.19616 +21 +-2.79036 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19616 +20 +-2.79036 +11 +6.19424 +21 +-2.79164 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19424 +20 +-2.79164 +11 +6.19198 +21 +-2.79209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19198 +20 +-2.79209 +11 +6.18017 +21 +-2.79209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18017 +20 +-2.79209 +11 +6.17791 +21 +-2.79164 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17791 +20 +-2.79164 +11 +6.17599 +21 +-2.79036 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17599 +20 +-2.79036 +11 +6.17471 +21 +-2.78845 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17471 +20 +-2.78845 +11 +6.17426 +21 +-2.78619 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17426 +20 +-2.78619 +11 +6.17426 +21 +-2.76158 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17426 +20 +-2.76158 +11 +6.14462 +21 +-2.76158 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14462 +20 +-2.76158 +11 +6.14462 +21 +-2.76259 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14462 +20 +-2.76259 +11 +6.14387 +21 +-2.76636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14387 +20 +-2.76636 +11 +6.14174 +21 +-2.76955 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14174 +20 +-2.76955 +11 +6.13854 +21 +-2.77168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13854 +20 +-2.77168 +11 +6.13478 +21 +-2.77243 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13478 +20 +-2.77243 +11 +6.09737 +21 +-2.77243 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09737 +20 +-2.77243 +11 +6.09361 +21 +-2.77168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09361 +20 +-2.77168 +11 +6.09041 +21 +-2.76955 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09041 +20 +-2.76955 +11 +6.08828 +21 +-2.76636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08828 +20 +-2.76636 +11 +6.08753 +21 +-2.76259 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08753 +20 +-2.76259 +11 +6.08753 +21 +-2.74291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08753 +20 +-2.74291 +11 +6.08828 +21 +-2.73914 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08828 +20 +-2.73914 +11 +6.09041 +21 +-2.73595 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09041 +20 +-2.73595 +11 +6.09361 +21 +-2.73381 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09361 +20 +-2.73381 +11 +6.09737 +21 +-2.73306 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09737 +20 +-2.73306 +11 +6.1082 +21 +-2.73306 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1082 +20 +-2.73306 +11 +6.1082 +21 +-2.70743 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1082 +20 +-2.70743 +11 +6.10305 +21 +-2.70899 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10305 +20 +-2.70899 +11 +6.09537 +21 +-2.70974 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09537 +20 +-2.70974 +11 +6.08769 +21 +-2.70899 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08769 +20 +-2.70899 +11 +6.08031 +21 +-2.70675 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08031 +20 +-2.70675 +11 +6.0735 +21 +-2.70311 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0735 +20 +-2.70311 +11 +6.06754 +21 +-2.69821 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06754 +20 +-2.69821 +11 +6.06264 +21 +-2.69225 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06264 +20 +-2.69225 +11 +6.059 +21 +-2.68544 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.059 +20 +-2.68544 +11 +6.05676 +21 +-2.67805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05676 +20 +-2.67805 +11 +6.056 +21 +-2.67037 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.056 +20 +-2.67037 +11 +6.05676 +21 +-2.66269 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05676 +20 +-2.66269 +11 +6.059 +21 +-2.65531 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.059 +20 +-2.65531 +11 +6.06264 +21 +-2.6485 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06264 +20 +-2.6485 +11 +6.06754 +21 +-2.64254 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06754 +20 +-2.64254 +11 +6.0735 +21 +-2.63764 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0735 +20 +-2.63764 +11 +6.08031 +21 +-2.634 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08031 +20 +-2.634 +11 +6.08769 +21 +-2.63176 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08769 +20 +-2.63176 +11 +6.09537 +21 +-2.631 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09537 +20 +-2.631 +11 +6.10305 +21 +-2.63176 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48282 +20 +-2.53681 +11 +6.48601 +21 +-2.53895 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48601 +20 +-2.53895 +11 +6.48815 +21 +-2.54214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48815 +20 +-2.54214 +11 +6.4889 +21 +-2.54591 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4889 +20 +-2.54591 +11 +6.4889 +21 +-2.5643 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4889 +20 +-2.5643 +11 +6.50826 +21 +-2.58366 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50826 +20 +-2.58366 +11 +6.55531 +21 +-2.58366 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55531 +20 +-2.58366 +11 +6.55531 +21 +-2.58169 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55531 +20 +-2.58169 +11 +6.55606 +21 +-2.57793 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55606 +20 +-2.57793 +11 +6.5582 +21 +-2.57473 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5582 +20 +-2.57473 +11 +6.56139 +21 +-2.5726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56139 +20 +-2.5726 +11 +6.56516 +21 +-2.57185 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56516 +20 +-2.57185 +11 +6.58484 +21 +-2.57185 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58484 +20 +-2.57185 +11 +6.58861 +21 +-2.5726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58861 +20 +-2.5726 +11 +6.5918 +21 +-2.57473 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5918 +20 +-2.57473 +11 +6.59394 +21 +-2.57793 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59394 +20 +-2.57793 +11 +6.59469 +21 +-2.58169 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59469 +20 +-2.58169 +11 +6.59469 +21 +-2.60138 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59469 +20 +-2.60138 +11 +6.59394 +21 +-2.60514 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59394 +20 +-2.60514 +11 +6.5918 +21 +-2.60834 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5918 +20 +-2.60834 +11 +6.58861 +21 +-2.61047 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58861 +20 +-2.61047 +11 +6.58484 +21 +-2.61122 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58484 +20 +-2.61122 +11 +6.56516 +21 +-2.61122 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56516 +20 +-2.61122 +11 +6.56139 +21 +-2.61047 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56139 +20 +-2.61047 +11 +6.5582 +21 +-2.60834 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5582 +20 +-2.60834 +11 +6.55606 +21 +-2.60514 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55606 +20 +-2.60514 +11 +6.55531 +21 +-2.60138 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55531 +20 +-2.60138 +11 +6.55531 +21 +-2.59941 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55531 +20 +-2.59941 +11 +6.505 +21 +-2.59941 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.505 +20 +-2.59941 +11 +6.50371 +21 +-2.59912 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50371 +20 +-2.59912 +11 +6.5024 +21 +-2.59897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5024 +20 +-2.59897 +11 +6.50202 +21 +-2.59873 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50202 +20 +-2.59873 +11 +6.50158 +21 +-2.59863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50158 +20 +-2.59863 +11 +6.50055 +21 +-2.59781 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50055 +20 +-2.59781 +11 +6.49943 +21 +-2.5971 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49943 +20 +-2.5971 +11 +6.48787 +21 +-2.58554 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48787 +20 +-2.58554 +11 +6.48787 +21 +-2.6292 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48787 +20 +-2.6292 +11 +6.4892 +21 +-2.63009 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4892 +20 +-2.63009 +11 +6.49134 +21 +-2.63328 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49134 +20 +-2.63328 +11 +6.49209 +21 +-2.63705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49209 +20 +-2.63705 +11 +6.49209 +21 +-2.67445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49209 +20 +-2.67445 +11 +6.49134 +21 +-2.67822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49134 +20 +-2.67822 +11 +6.4892 +21 +-2.68141 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4892 +20 +-2.68141 +11 +6.48601 +21 +-2.68354 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48601 +20 +-2.68354 +11 +6.48224 +21 +-2.68429 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48224 +20 +-2.68429 +11 +6.46256 +21 +-2.68429 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46256 +20 +-2.68429 +11 +6.45879 +21 +-2.68354 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45879 +20 +-2.68354 +11 +6.4556 +21 +-2.68141 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4556 +20 +-2.68141 +11 +6.45347 +21 +-2.67822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45347 +20 +-2.67822 +11 +6.45272 +21 +-2.67445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45272 +20 +-2.67445 +11 +6.45272 +21 +-2.63705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45272 +20 +-2.63705 +11 +6.45347 +21 +-2.63328 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45347 +20 +-2.63328 +11 +6.4556 +21 +-2.63009 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4556 +20 +-2.63009 +11 +6.45879 +21 +-2.62795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45879 +20 +-2.62795 +11 +6.46256 +21 +-2.6272 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46256 +20 +-2.6272 +11 +6.47213 +21 +-2.6272 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47213 +20 +-2.6272 +11 +6.47213 +21 +-2.57543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47213 +20 +-2.57543 +11 +6.45937 +21 +-2.57543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45937 +20 +-2.57543 +11 +6.4556 +21 +-2.57468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4556 +20 +-2.57468 +11 +6.45241 +21 +-2.57255 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45241 +20 +-2.57255 +11 +6.45028 +21 +-2.56936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45028 +20 +-2.56936 +11 +6.44953 +21 +-2.56559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44953 +20 +-2.56559 +11 +6.44953 +21 +-2.54591 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44953 +20 +-2.54591 +11 +6.45028 +21 +-2.54214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45028 +20 +-2.54214 +11 +6.45241 +21 +-2.53895 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45241 +20 +-2.53895 +11 +6.4556 +21 +-2.53681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4556 +20 +-2.53681 +11 +6.45937 +21 +-2.53606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45937 +20 +-2.53606 +11 +6.47906 +21 +-2.53606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47906 +20 +-2.53606 +11 +6.48282 +21 +-2.53681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3844 +20 +-2.53681 +11 +6.38759 +21 +-2.53895 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38759 +20 +-2.53895 +11 +6.38972 +21 +-2.54214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38972 +20 +-2.54214 +11 +6.39047 +21 +-2.54591 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39047 +20 +-2.54591 +11 +6.39047 +21 +-2.56559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39047 +20 +-2.56559 +11 +6.38972 +21 +-2.56936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38972 +20 +-2.56936 +11 +6.38759 +21 +-2.57255 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38759 +20 +-2.57255 +11 +6.3844 +21 +-2.57468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3844 +20 +-2.57468 +11 +6.38063 +21 +-2.57543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38063 +20 +-2.57543 +11 +6.36094 +21 +-2.57543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36094 +20 +-2.57543 +11 +6.35718 +21 +-2.57468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35718 +20 +-2.57468 +11 +6.35399 +21 +-2.57255 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35399 +20 +-2.57255 +11 +6.35185 +21 +-2.56936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35185 +20 +-2.56936 +11 +6.3511 +21 +-2.56559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3511 +20 +-2.56559 +11 +6.3511 +21 +-2.56362 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3511 +20 +-2.56362 +11 +6.33901 +21 +-2.56362 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33901 +20 +-2.56362 +11 +6.30372 +21 +-2.59891 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30372 +20 +-2.59891 +11 +6.30354 +21 +-2.59902 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30354 +20 +-2.59902 +11 +6.30354 +21 +-2.60319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30354 +20 +-2.60319 +11 +6.30279 +21 +-2.60696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30279 +20 +-2.60696 +11 +6.30066 +21 +-2.61015 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30066 +20 +-2.61015 +11 +6.29747 +21 +-2.61228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29747 +20 +-2.61228 +11 +6.2937 +21 +-2.61303 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2937 +20 +-2.61303 +11 +6.2563 +21 +-2.61303 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2563 +20 +-2.61303 +11 +6.25253 +21 +-2.61228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25253 +20 +-2.61228 +11 +6.24934 +21 +-2.61015 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24934 +20 +-2.61015 +11 +6.24721 +21 +-2.60696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24721 +20 +-2.60696 +11 +6.24646 +21 +-2.60319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24646 +20 +-2.60319 +11 +6.24646 +21 +-2.60224 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24646 +20 +-2.60224 +11 +6.21469 +21 +-2.60224 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21469 +20 +-2.60224 +11 +6.21469 +21 +-2.6042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21469 +20 +-2.6042 +11 +6.21394 +21 +-2.60797 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21394 +20 +-2.60797 +11 +6.2118 +21 +-2.61116 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2118 +20 +-2.61116 +11 +6.20861 +21 +-2.6133 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20861 +20 +-2.6133 +11 +6.20484 +21 +-2.61405 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20484 +20 +-2.61405 +11 +6.18516 +21 +-2.61405 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18516 +20 +-2.61405 +11 +6.18139 +21 +-2.6133 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18139 +20 +-2.6133 +11 +6.1782 +21 +-2.61116 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1782 +20 +-2.61116 +11 +6.17606 +21 +-2.60797 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17606 +20 +-2.60797 +11 +6.17531 +21 +-2.6042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17531 +20 +-2.6042 +11 +6.17531 +21 +-2.58452 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17531 +20 +-2.58452 +11 +6.17606 +21 +-2.58075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17606 +20 +-2.58075 +11 +6.1782 +21 +-2.57756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1782 +20 +-2.57756 +11 +6.18139 +21 +-2.57543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18139 +20 +-2.57543 +11 +6.18516 +21 +-2.57468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18516 +20 +-2.57468 +11 +6.20484 +21 +-2.57468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20484 +20 +-2.57468 +11 +6.20861 +21 +-2.57543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20861 +20 +-2.57543 +11 +6.2118 +21 +-2.57756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2118 +20 +-2.57756 +11 +6.21394 +21 +-2.58075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21394 +20 +-2.58075 +11 +6.21469 +21 +-2.58452 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21469 +20 +-2.58452 +11 +6.21469 +21 +-2.58649 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21469 +20 +-2.58649 +11 +6.24646 +21 +-2.58649 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24646 +20 +-2.58649 +11 +6.24646 +21 +-2.5835 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24646 +20 +-2.5835 +11 +6.24721 +21 +-2.57974 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24721 +20 +-2.57974 +11 +6.24934 +21 +-2.57654 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24934 +20 +-2.57654 +11 +6.25253 +21 +-2.57441 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25253 +20 +-2.57441 +11 +6.2563 +21 +-2.57366 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2563 +20 +-2.57366 +11 +6.2937 +21 +-2.57366 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2937 +20 +-2.57366 +11 +6.29747 +21 +-2.57441 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29747 +20 +-2.57441 +11 +6.30066 +21 +-2.57654 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30066 +20 +-2.57654 +11 +6.30192 +21 +-2.57844 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30192 +20 +-2.57844 +11 +6.33018 +21 +-2.55018 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33018 +20 +-2.55018 +11 +6.3313 +21 +-2.54948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3313 +20 +-2.54948 +11 +6.33233 +21 +-2.54865 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33233 +20 +-2.54865 +11 +6.33277 +21 +-2.54855 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33277 +20 +-2.54855 +11 +6.33315 +21 +-2.54832 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33315 +20 +-2.54832 +11 +6.33446 +21 +-2.54817 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33446 +20 +-2.54817 +11 +6.33575 +21 +-2.54787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33575 +20 +-2.54787 +11 +6.3511 +21 +-2.54787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3511 +20 +-2.54787 +11 +6.3511 +21 +-2.54591 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3511 +20 +-2.54591 +11 +6.35185 +21 +-2.54214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35185 +20 +-2.54214 +11 +6.35399 +21 +-2.53895 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35399 +20 +-2.53895 +11 +6.35718 +21 +-2.53681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35718 +20 +-2.53681 +11 +6.36094 +21 +-2.53606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36094 +20 +-2.53606 +11 +6.38063 +21 +-2.53606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38063 +20 +-2.53606 +11 +6.3844 +21 +-2.53681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20861 +20 +-2.477 +11 +6.2118 +21 +-2.47913 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2118 +20 +-2.47913 +11 +6.21394 +21 +-2.48233 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21394 +20 +-2.48233 +11 +6.21469 +21 +-2.48609 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21469 +20 +-2.48609 +11 +6.21469 +21 +-2.50449 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21469 +20 +-2.50449 +11 +6.2184 +21 +-2.5082 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2184 +20 +-2.5082 +11 +6.25852 +21 +-2.5082 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25852 +20 +-2.5082 +11 +6.25852 +21 +-2.50574 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25852 +20 +-2.50574 +11 +6.25926 +21 +-2.50197 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25926 +20 +-2.50197 +11 +6.2614 +21 +-2.49878 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2614 +20 +-2.49878 +11 +6.26459 +21 +-2.49665 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26459 +20 +-2.49665 +11 +6.26836 +21 +-2.4959 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26836 +20 +-2.4959 +11 +6.30379 +21 +-2.4959 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30379 +20 +-2.4959 +11 +6.30756 +21 +-2.49665 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30756 +20 +-2.49665 +11 +6.31075 +21 +-2.49878 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31075 +20 +-2.49878 +11 +6.31288 +21 +-2.50197 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31288 +20 +-2.50197 +11 +6.31363 +21 +-2.50574 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31363 +20 +-2.50574 +11 +6.31363 +21 +-2.52641 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31363 +20 +-2.52641 +11 +6.31288 +21 +-2.53018 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31288 +20 +-2.53018 +11 +6.31075 +21 +-2.53337 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31075 +20 +-2.53337 +11 +6.30756 +21 +-2.5355 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30756 +20 +-2.5355 +11 +6.30379 +21 +-2.53625 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30379 +20 +-2.53625 +11 +6.26836 +21 +-2.53625 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26836 +20 +-2.53625 +11 +6.26459 +21 +-2.5355 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26459 +20 +-2.5355 +11 +6.2614 +21 +-2.53337 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2614 +20 +-2.53337 +11 +6.25926 +21 +-2.53018 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25926 +20 +-2.53018 +11 +6.25852 +21 +-2.52641 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25852 +20 +-2.52641 +11 +6.25852 +21 +-2.52395 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25852 +20 +-2.52395 +11 +6.21514 +21 +-2.52395 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21514 +20 +-2.52395 +11 +6.21385 +21 +-2.52365 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21385 +20 +-2.52365 +11 +6.21254 +21 +-2.52351 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21254 +20 +-2.52351 +11 +6.21216 +21 +-2.52327 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21216 +20 +-2.52327 +11 +6.21172 +21 +-2.52317 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21172 +20 +-2.52317 +11 +6.21069 +21 +-2.52235 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21069 +20 +-2.52235 +11 +6.20957 +21 +-2.52164 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20957 +20 +-2.52164 +11 +6.20355 +21 +-2.51562 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20355 +20 +-2.51562 +11 +6.18516 +21 +-2.51562 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18516 +20 +-2.51562 +11 +6.18139 +21 +-2.51487 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18139 +20 +-2.51487 +11 +6.1782 +21 +-2.51274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1782 +20 +-2.51274 +11 +6.17606 +21 +-2.50955 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17606 +20 +-2.50955 +11 +6.17531 +21 +-2.50578 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17531 +20 +-2.50578 +11 +6.17531 +21 +-2.48609 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17531 +20 +-2.48609 +11 +6.17606 +21 +-2.48233 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17606 +20 +-2.48233 +11 +6.1782 +21 +-2.47913 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1782 +20 +-2.47913 +11 +6.18139 +21 +-2.477 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18139 +20 +-2.477 +11 +6.18516 +21 +-2.47625 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18516 +20 +-2.47625 +11 +6.20484 +21 +-2.47625 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20484 +20 +-2.47625 +11 +6.20861 +21 +-2.477 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37325 +20 +-2.35894 +11 +6.37644 +21 +-2.36107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37644 +20 +-2.36107 +11 +6.37858 +21 +-2.36426 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37858 +20 +-2.36426 +11 +6.37933 +21 +-2.36803 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37933 +20 +-2.36803 +11 +6.37933 +21 +-2.40346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37933 +20 +-2.40346 +11 +6.37858 +21 +-2.40723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37858 +20 +-2.40723 +11 +6.37644 +21 +-2.41042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37644 +20 +-2.41042 +11 +6.37325 +21 +-2.41256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37325 +20 +-2.41256 +11 +6.36948 +21 +-2.41331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36948 +20 +-2.41331 +11 +6.36702 +21 +-2.41331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36702 +20 +-2.41331 +11 +6.36702 +21 +-2.4372 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36702 +20 +-2.4372 +11 +6.36852 +21 +-2.4372 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36852 +20 +-2.4372 +11 +6.37228 +21 +-2.43795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37228 +20 +-2.43795 +11 +6.37548 +21 +-2.44009 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37548 +20 +-2.44009 +11 +6.37761 +21 +-2.44328 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37761 +20 +-2.44328 +11 +6.37836 +21 +-2.44705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37836 +20 +-2.44705 +11 +6.37836 +21 +-2.48445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37836 +20 +-2.48445 +11 +6.37761 +21 +-2.48822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37761 +20 +-2.48822 +11 +6.37548 +21 +-2.49141 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37548 +20 +-2.49141 +11 +6.37228 +21 +-2.49354 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37228 +20 +-2.49354 +11 +6.36852 +21 +-2.49429 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36852 +20 +-2.49429 +11 +6.34883 +21 +-2.49429 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34883 +20 +-2.49429 +11 +6.34506 +21 +-2.49354 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34506 +20 +-2.49354 +11 +6.34187 +21 +-2.49141 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34187 +20 +-2.49141 +11 +6.33974 +21 +-2.48822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33974 +20 +-2.48822 +11 +6.33899 +21 +-2.48445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33899 +20 +-2.48445 +11 +6.33899 +21 +-2.44705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33899 +20 +-2.44705 +11 +6.33974 +21 +-2.44328 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33974 +20 +-2.44328 +11 +6.34187 +21 +-2.44009 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34187 +20 +-2.44009 +11 +6.34506 +21 +-2.43795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34506 +20 +-2.43795 +11 +6.34883 +21 +-2.4372 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34883 +20 +-2.4372 +11 +6.35128 +21 +-2.4372 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35128 +20 +-2.4372 +11 +6.35128 +21 +-2.41331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35128 +20 +-2.41331 +11 +6.34881 +21 +-2.41331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34881 +20 +-2.41331 +11 +6.34505 +21 +-2.41256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34505 +20 +-2.41256 +11 +6.34186 +21 +-2.41042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34186 +20 +-2.41042 +11 +6.33972 +21 +-2.40723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33972 +20 +-2.40723 +11 +6.33897 +21 +-2.40346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33897 +20 +-2.40346 +11 +6.33897 +21 +-2.40246 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33897 +20 +-2.40246 +11 +6.31225 +21 +-2.42918 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31225 +20 +-2.42918 +11 +6.31288 +21 +-2.43012 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31288 +20 +-2.43012 +11 +6.31363 +21 +-2.43389 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31363 +20 +-2.43389 +11 +6.31363 +21 +-2.45456 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31363 +20 +-2.45456 +11 +6.31288 +21 +-2.45833 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31288 +20 +-2.45833 +11 +6.31075 +21 +-2.46152 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31075 +20 +-2.46152 +11 +6.30756 +21 +-2.46365 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30756 +20 +-2.46365 +11 +6.30379 +21 +-2.4644 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30379 +20 +-2.4644 +11 +6.26836 +21 +-2.4644 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26836 +20 +-2.4644 +11 +6.26459 +21 +-2.46365 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26459 +20 +-2.46365 +11 +6.2614 +21 +-2.46152 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2614 +20 +-2.46152 +11 +6.25926 +21 +-2.45833 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25926 +20 +-2.45833 +11 +6.25852 +21 +-2.45456 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25852 +20 +-2.45456 +11 +6.25852 +21 +-2.43389 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25852 +20 +-2.43389 +11 +6.25926 +21 +-2.43012 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25926 +20 +-2.43012 +11 +6.2614 +21 +-2.42693 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2614 +20 +-2.42693 +11 +6.26459 +21 +-2.4248 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26459 +20 +-2.4248 +11 +6.26836 +21 +-2.42405 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26836 +20 +-2.42405 +11 +6.29512 +21 +-2.42405 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29512 +20 +-2.42405 +11 +6.33897 +21 +-2.38019 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33897 +20 +-2.38019 +11 +6.33897 +21 +-2.36803 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33897 +20 +-2.36803 +11 +6.33972 +21 +-2.36426 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33972 +20 +-2.36426 +11 +6.34186 +21 +-2.36107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34186 +20 +-2.36107 +11 +6.34505 +21 +-2.35894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34505 +20 +-2.35894 +11 +6.34881 +21 +-2.35819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34881 +20 +-2.35819 +11 +6.36948 +21 +-2.35819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36948 +20 +-2.35819 +11 +6.37325 +21 +-2.35894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41268 +20 +-2.24639 +11 +6.42007 +21 +-2.24863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42007 +20 +-2.24863 +11 +6.42687 +21 +-2.25226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42687 +20 +-2.25226 +11 +6.43284 +21 +-2.25716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43284 +20 +-2.25716 +11 +6.43774 +21 +-2.26313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43774 +20 +-2.26313 +11 +6.44137 +21 +-2.26993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44137 +20 +-2.26993 +11 +6.44361 +21 +-2.27732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44361 +20 +-2.27732 +11 +6.44437 +21 +-2.285 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44437 +20 +-2.285 +11 +6.44361 +21 +-2.29268 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44361 +20 +-2.29268 +11 +6.44137 +21 +-2.30007 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44137 +20 +-2.30007 +11 +6.43774 +21 +-2.30687 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43774 +20 +-2.30687 +11 +6.43763 +21 +-2.307 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43763 +20 +-2.307 +11 +6.43809 +21 +-2.30758 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43809 +20 +-2.30758 +11 +6.43819 +21 +-2.30802 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43819 +20 +-2.30802 +11 +6.43843 +21 +-2.3084 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43843 +20 +-2.3084 +11 +6.43858 +21 +-2.30971 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43858 +20 +-2.30971 +11 +6.43887 +21 +-2.311 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43887 +20 +-2.311 +11 +6.43887 +21 +-2.35819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43887 +20 +-2.35819 +11 +6.44133 +21 +-2.35819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44133 +20 +-2.35819 +11 +6.4451 +21 +-2.35894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4451 +20 +-2.35894 +11 +6.44829 +21 +-2.36107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44829 +20 +-2.36107 +11 +6.45043 +21 +-2.36426 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45043 +20 +-2.36426 +11 +6.45118 +21 +-2.36803 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45118 +20 +-2.36803 +11 +6.45118 +21 +-2.37787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45118 +20 +-2.37787 +11 +6.49146 +21 +-2.37787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49146 +20 +-2.37787 +11 +6.49146 +21 +-2.3735 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49146 +20 +-2.3735 +11 +6.49221 +21 +-2.36974 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49221 +20 +-2.36974 +11 +6.49434 +21 +-2.36654 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49434 +20 +-2.36654 +11 +6.49753 +21 +-2.36441 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49753 +20 +-2.36441 +11 +6.5013 +21 +-2.36366 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5013 +20 +-2.36366 +11 +6.5387 +21 +-2.36366 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5387 +20 +-2.36366 +11 +6.54247 +21 +-2.36441 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54247 +20 +-2.36441 +11 +6.54566 +21 +-2.36654 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54566 +20 +-2.36654 +11 +6.54779 +21 +-2.36974 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54779 +20 +-2.36974 +11 +6.54854 +21 +-2.3735 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54854 +20 +-2.3735 +11 +6.54854 +21 +-2.39319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54854 +20 +-2.39319 +11 +6.54779 +21 +-2.39696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54779 +20 +-2.39696 +11 +6.54566 +21 +-2.40015 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54566 +20 +-2.40015 +11 +6.54247 +21 +-2.40228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54247 +20 +-2.40228 +11 +6.5387 +21 +-2.40303 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5387 +20 +-2.40303 +11 +6.5013 +21 +-2.40303 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5013 +20 +-2.40303 +11 +6.49753 +21 +-2.40228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49753 +20 +-2.40228 +11 +6.49434 +21 +-2.40015 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49434 +20 +-2.40015 +11 +6.49221 +21 +-2.39696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49221 +20 +-2.39696 +11 +6.49154 +21 +-2.39362 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49154 +20 +-2.39362 +11 +6.45118 +21 +-2.39362 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45118 +20 +-2.39362 +11 +6.45118 +21 +-2.40346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45118 +20 +-2.40346 +11 +6.45043 +21 +-2.40723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45043 +20 +-2.40723 +11 +6.44829 +21 +-2.41042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44829 +20 +-2.41042 +11 +6.4451 +21 +-2.41256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4451 +20 +-2.41256 +11 +6.44133 +21 +-2.41331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44133 +20 +-2.41331 +11 +6.42067 +21 +-2.41331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42067 +20 +-2.41331 +11 +6.4169 +21 +-2.41256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4169 +20 +-2.41256 +11 +6.41371 +21 +-2.41042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41371 +20 +-2.41042 +11 +6.41157 +21 +-2.40723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41157 +20 +-2.40723 +11 +6.41082 +21 +-2.40346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41082 +20 +-2.40346 +11 +6.41082 +21 +-2.36803 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41082 +20 +-2.36803 +11 +6.41157 +21 +-2.36426 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41157 +20 +-2.36426 +11 +6.41371 +21 +-2.36107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41371 +20 +-2.36107 +11 +6.4169 +21 +-2.35894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4169 +20 +-2.35894 +11 +6.42067 +21 +-2.35819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42067 +20 +-2.35819 +11 +6.42313 +21 +-2.35819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42313 +20 +-2.35819 +11 +6.42313 +21 +-2.31974 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42313 +20 +-2.31974 +11 +6.42007 +21 +-2.32137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42007 +20 +-2.32137 +11 +6.41268 +21 +-2.32361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41268 +20 +-2.32361 +11 +6.405 +21 +-2.32437 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.405 +20 +-2.32437 +11 +6.39732 +21 +-2.32361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39732 +20 +-2.32361 +11 +6.38993 +21 +-2.32137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38993 +20 +-2.32137 +11 +6.38313 +21 +-2.31774 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38313 +20 +-2.31774 +11 +6.37716 +21 +-2.31284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37716 +20 +-2.31284 +11 +6.37226 +21 +-2.30687 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37226 +20 +-2.30687 +11 +6.36863 +21 +-2.30007 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36863 +20 +-2.30007 +11 +6.36639 +21 +-2.29268 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36639 +20 +-2.29268 +11 +6.36563 +21 +-2.285 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36563 +20 +-2.285 +11 +6.36639 +21 +-2.27732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36639 +20 +-2.27732 +11 +6.36863 +21 +-2.26993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36863 +20 +-2.26993 +11 +6.37226 +21 +-2.26313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37226 +20 +-2.26313 +11 +6.37716 +21 +-2.25716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37716 +20 +-2.25716 +11 +6.38313 +21 +-2.25226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38313 +20 +-2.25226 +11 +6.38993 +21 +-2.24863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38993 +20 +-2.24863 +11 +6.39732 +21 +-2.24639 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39732 +20 +-2.24639 +11 +6.405 +21 +-2.24563 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.405 +20 +-2.24563 +11 +6.41268 +21 +-2.24639 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47054 +20 +-2.20742 +11 +6.47185 +21 +-2.20757 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47185 +20 +-2.20757 +11 +6.47223 +21 +-2.20781 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47223 +20 +-2.20781 +11 +6.47267 +21 +-2.20791 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47267 +20 +-2.20791 +11 +6.4737 +21 +-2.20873 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4737 +20 +-2.20873 +11 +6.47482 +21 +-2.20943 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47482 +20 +-2.20943 +11 +6.60557 +21 +-2.34018 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60557 +20 +-2.34018 +11 +6.60627 +21 +-2.3413 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60627 +20 +-2.3413 +11 +6.60709 +21 +-2.34233 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60709 +20 +-2.34233 +11 +6.60719 +21 +-2.34277 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60719 +20 +-2.34277 +11 +6.60743 +21 +-2.34315 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60743 +20 +-2.34315 +11 +6.60758 +21 +-2.34446 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60758 +20 +-2.34446 +11 +6.60787 +21 +-2.34575 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60787 +20 +-2.34575 +11 +6.60787 +21 +-2.45749 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60787 +20 +-2.45749 +11 +6.67057 +21 +-2.52018 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67057 +20 +-2.52018 +11 +6.67127 +21 +-2.5213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67127 +20 +-2.5213 +11 +6.67209 +21 +-2.52233 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67209 +20 +-2.52233 +11 +6.67219 +21 +-2.52277 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67219 +20 +-2.52277 +11 +6.67243 +21 +-2.52315 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67243 +20 +-2.52315 +11 +6.67258 +21 +-2.52446 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67258 +20 +-2.52446 +11 +6.67287 +21 +-2.52575 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67287 +20 +-2.52575 +11 +6.67287 +21 +-2.91575 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67287 +20 +-2.91575 +11 +6.67258 +21 +-2.91704 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67258 +20 +-2.91704 +11 +6.67243 +21 +-2.91835 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67243 +20 +-2.91835 +11 +6.67219 +21 +-2.91873 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67219 +20 +-2.91873 +11 +6.67209 +21 +-2.91916 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67209 +20 +-2.91916 +11 +6.67127 +21 +-2.9202 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67127 +20 +-2.9202 +11 +6.67057 +21 +-2.92132 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67057 +20 +-2.92132 +11 +6.64057 +21 +-2.95132 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64057 +20 +-2.95132 +11 +6.63945 +21 +-2.95202 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63945 +20 +-2.95202 +11 +6.63842 +21 +-2.95284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63842 +20 +-2.95284 +11 +6.63798 +21 +-2.95294 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63798 +20 +-2.95294 +11 +6.6376 +21 +-2.95318 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6376 +20 +-2.95318 +11 +6.63629 +21 +-2.95333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63629 +20 +-2.95333 +11 +6.635 +21 +-2.95362 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.635 +20 +-2.95362 +11 +6.62787 +21 +-2.95362 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62787 +20 +-2.95362 +11 +6.62787 +21 +-3.22575 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62787 +20 +-3.22575 +11 +6.62758 +21 +-3.22704 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62758 +20 +-3.22704 +11 +6.62743 +21 +-3.22835 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62743 +20 +-3.22835 +11 +6.62719 +21 +-3.22873 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62719 +20 +-3.22873 +11 +6.62709 +21 +-3.22916 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62709 +20 +-3.22916 +11 +6.62627 +21 +-3.2302 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62627 +20 +-3.2302 +11 +6.62557 +21 +-3.23132 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62557 +20 +-3.23132 +11 +6.57787 +21 +-3.27901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57787 +20 +-3.27901 +11 +6.57787 +21 +-3.51 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57787 +20 +-3.51 +11 +6.57758 +21 +-3.51129 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57758 +20 +-3.51129 +11 +6.57743 +21 +-3.5126 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57743 +20 +-3.5126 +11 +6.57719 +21 +-3.51298 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57719 +20 +-3.51298 +11 +6.57709 +21 +-3.51342 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57709 +20 +-3.51342 +11 +6.57627 +21 +-3.51445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57627 +20 +-3.51445 +11 +6.57557 +21 +-3.51557 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57557 +20 +-3.51557 +11 +6.51317 +21 +-3.57797 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51317 +20 +-3.57797 +11 +6.51205 +21 +-3.57867 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51205 +20 +-3.57867 +11 +6.51101 +21 +-3.5795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51101 +20 +-3.5795 +11 +6.51058 +21 +-3.5796 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51058 +20 +-3.5796 +11 +6.5102 +21 +-3.57983 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5102 +20 +-3.57983 +11 +6.50889 +21 +-3.57998 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50889 +20 +-3.57998 +11 +6.5076 +21 +-3.58028 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5076 +20 +-3.58028 +11 +6.48854 +21 +-3.58028 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48854 +20 +-3.58028 +11 +6.48854 +21 +-3.58224 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48854 +20 +-3.58224 +11 +6.48779 +21 +-3.58601 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48779 +20 +-3.58601 +11 +6.48566 +21 +-3.5892 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48566 +20 +-3.5892 +11 +6.48247 +21 +-3.59134 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48247 +20 +-3.59134 +11 +6.4787 +21 +-3.59209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4787 +20 +-3.59209 +11 +6.44905 +21 +-3.59209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44905 +20 +-3.59209 +11 +6.39846 +21 +-3.64267 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39846 +20 +-3.64267 +11 +6.39846 +21 +-3.6706 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39846 +20 +-3.6706 +11 +6.57057 +21 +-3.8427 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57057 +20 +-3.8427 +11 +6.57127 +21 +-3.84382 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57127 +20 +-3.84382 +11 +6.57209 +21 +-3.84485 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57209 +20 +-3.84485 +11 +6.57219 +21 +-3.84529 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57219 +20 +-3.84529 +11 +6.57243 +21 +-3.84567 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57243 +20 +-3.84567 +11 +6.57258 +21 +-3.84698 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57258 +20 +-3.84698 +11 +6.57287 +21 +-3.84827 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57287 +20 +-3.84827 +11 +6.57287 +21 +-4.115 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57287 +20 +-4.115 +11 +6.57258 +21 +-4.11629 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57258 +20 +-4.11629 +11 +6.57243 +21 +-4.1176 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57243 +20 +-4.1176 +11 +6.57219 +21 +-4.11798 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57219 +20 +-4.11798 +11 +6.57209 +21 +-4.11842 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57209 +20 +-4.11842 +11 +6.57127 +21 +-4.11945 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57127 +20 +-4.11945 +11 +6.57057 +21 +-4.12057 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57057 +20 +-4.12057 +11 +6.50057 +21 +-4.19057 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50057 +20 +-4.19057 +11 +6.49945 +21 +-4.19127 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49945 +20 +-4.19127 +11 +6.49842 +21 +-4.19209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49842 +20 +-4.19209 +11 +6.49798 +21 +-4.19219 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49798 +20 +-4.19219 +11 +6.4976 +21 +-4.19243 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4976 +20 +-4.19243 +11 +6.49629 +21 +-4.19258 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49629 +20 +-4.19258 +11 +6.495 +21 +-4.19287 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.495 +20 +-4.19287 +11 +6.39 +21 +-4.19287 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39 +20 +-4.19287 +11 +6.38871 +21 +-4.19258 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38871 +20 +-4.19258 +11 +6.3874 +21 +-4.19243 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3874 +20 +-4.19243 +11 +6.38702 +21 +-4.19219 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38702 +20 +-4.19219 +11 +6.38658 +21 +-4.19209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38658 +20 +-4.19209 +11 +6.38555 +21 +-4.19127 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38555 +20 +-4.19127 +11 +6.38443 +21 +-4.19057 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38443 +20 +-4.19057 +11 +6.21935 +21 +-4.02549 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21935 +20 +-4.02549 +11 +6.21935 +21 +-4.03937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21935 +20 +-4.03937 +11 +6.2186 +21 +-4.04314 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2186 +20 +-4.04314 +11 +6.21647 +21 +-4.04633 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21647 +20 +-4.04633 +11 +6.21327 +21 +-4.04846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21327 +20 +-4.04846 +11 +6.20951 +21 +-4.04921 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20951 +20 +-4.04921 +11 +6.14061 +21 +-4.04921 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14061 +20 +-4.04921 +11 +6.14061 +21 +-4.05947 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14061 +20 +-4.05947 +11 +6.21326 +21 +-4.13213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21326 +20 +-4.13213 +11 +6.245 +21 +-4.13213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.245 +20 +-4.13213 +11 +6.24629 +21 +-4.13242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24629 +20 +-4.13242 +11 +6.2476 +21 +-4.13257 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2476 +20 +-4.13257 +11 +6.24798 +21 +-4.13281 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24798 +20 +-4.13281 +11 +6.24842 +21 +-4.13291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24842 +20 +-4.13291 +11 +6.24945 +21 +-4.13373 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24945 +20 +-4.13373 +11 +6.25057 +21 +-4.13443 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25057 +20 +-4.13443 +11 +6.30057 +21 +-4.18443 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30057 +20 +-4.18443 +11 +6.30127 +21 +-4.18555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30127 +20 +-4.18555 +11 +6.30209 +21 +-4.18658 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30209 +20 +-4.18658 +11 +6.30219 +21 +-4.18702 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30219 +20 +-4.18702 +11 +6.30243 +21 +-4.1874 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30243 +20 +-4.1874 +11 +6.30258 +21 +-4.18871 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30258 +20 +-4.18871 +11 +6.30287 +21 +-4.19 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30287 +20 +-4.19 +11 +6.30287 +21 +-4.39 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30287 +20 +-4.39 +11 +6.30258 +21 +-4.39129 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30258 +20 +-4.39129 +11 +6.30243 +21 +-4.3926 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30243 +20 +-4.3926 +11 +6.30219 +21 +-4.39298 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30219 +20 +-4.39298 +11 +6.30209 +21 +-4.39342 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30209 +20 +-4.39342 +11 +6.30127 +21 +-4.39445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30127 +20 +-4.39445 +11 +6.30057 +21 +-4.39557 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30057 +20 +-4.39557 +11 +6.25057 +21 +-4.44557 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25057 +20 +-4.44557 +11 +6.24945 +21 +-4.44627 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24945 +20 +-4.44627 +11 +6.24842 +21 +-4.44709 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24842 +20 +-4.44709 +11 +6.24798 +21 +-4.44719 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24798 +20 +-4.44719 +11 +6.2476 +21 +-4.44743 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2476 +20 +-4.44743 +11 +6.24629 +21 +-4.44758 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24629 +20 +-4.44758 +11 +6.245 +21 +-4.44787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.245 +20 +-4.44787 +11 +6.07326 +21 +-4.44787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07326 +20 +-4.44787 +11 +6.00057 +21 +-4.52057 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00057 +20 +-4.52057 +11 +5.99945 +21 +-4.52127 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99945 +20 +-4.52127 +11 +5.99842 +21 +-4.52209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99842 +20 +-4.52209 +11 +5.99798 +21 +-4.52219 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99798 +20 +-4.52219 +11 +5.9976 +21 +-4.52243 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9976 +20 +-4.52243 +11 +5.99629 +21 +-4.52258 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99629 +20 +-4.52258 +11 +5.995 +21 +-4.52287 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.995 +20 +-4.52287 +11 +5.74826 +21 +-4.52287 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74826 +20 +-4.52287 +11 +5.65787 +21 +-4.61326 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65787 +20 +-4.61326 +11 +5.65787 +21 +-4.81674 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65787 +20 +-4.81674 +11 +5.69826 +21 +-4.85713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.69826 +20 +-4.85713 +11 +5.77285 +21 +-4.85713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77285 +20 +-4.85713 +11 +5.77285 +21 +-4.84031 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77285 +20 +-4.84031 +11 +5.7733 +21 +-4.83613 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7733 +20 +-4.83613 +11 +5.77526 +21 +-4.83088 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77526 +20 +-4.83088 +11 +5.77862 +21 +-4.8264 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77862 +20 +-4.8264 +11 +5.78311 +21 +-4.82304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78311 +20 +-4.82304 +11 +5.78836 +21 +-4.82108 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78836 +20 +-4.82108 +11 +5.79254 +21 +-4.82063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79254 +20 +-4.82063 +11 +5.83191 +21 +-4.82063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83191 +20 +-4.82063 +11 +5.83609 +21 +-4.82108 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83609 +20 +-4.82108 +11 +5.84134 +21 +-4.82304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84134 +20 +-4.82304 +11 +5.84583 +21 +-4.8264 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84583 +20 +-4.8264 +11 +5.84919 +21 +-4.83088 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84919 +20 +-4.83088 +11 +5.85114 +21 +-4.83613 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85114 +20 +-4.83613 +11 +5.85159 +21 +-4.84031 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85159 +20 +-4.84031 +11 +5.85159 +21 +-4.87969 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85159 +20 +-4.87969 +11 +5.85114 +21 +-4.88387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85114 +20 +-4.88387 +11 +5.84919 +21 +-4.88912 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84919 +20 +-4.88912 +11 +5.84583 +21 +-4.8936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84583 +20 +-4.8936 +11 +5.84134 +21 +-4.89696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84134 +20 +-4.89696 +11 +5.83609 +21 +-4.89892 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83609 +20 +-4.89892 +11 +5.83191 +21 +-4.89937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83191 +20 +-4.89937 +11 +5.79254 +21 +-4.89937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79254 +20 +-4.89937 +11 +5.78836 +21 +-4.89892 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78836 +20 +-4.89892 +11 +5.78311 +21 +-4.89696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78311 +20 +-4.89696 +11 +5.77862 +21 +-4.8936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77862 +20 +-4.8936 +11 +5.77526 +21 +-4.88912 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77526 +20 +-4.88912 +11 +5.7733 +21 +-4.88387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7733 +20 +-4.88387 +11 +5.77285 +21 +-4.87969 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77285 +20 +-4.87969 +11 +5.77285 +21 +-4.87287 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77285 +20 +-4.87287 +11 +5.695 +21 +-4.87287 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.695 +20 +-4.87287 +11 +5.69371 +21 +-4.87258 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.69371 +20 +-4.87258 +11 +5.6924 +21 +-4.87243 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6924 +20 +-4.87243 +11 +5.69202 +21 +-4.87219 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.69202 +20 +-4.87219 +11 +5.69158 +21 +-4.87209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.69158 +20 +-4.87209 +11 +5.69055 +21 +-4.87127 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.69055 +20 +-4.87127 +11 +5.68943 +21 +-4.87057 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68943 +20 +-4.87057 +11 +5.64443 +21 +-4.82557 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64443 +20 +-4.82557 +11 +5.64373 +21 +-4.82445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64373 +20 +-4.82445 +11 +5.64291 +21 +-4.82342 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64291 +20 +-4.82342 +11 +5.64281 +21 +-4.82298 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64281 +20 +-4.82298 +11 +5.64257 +21 +-4.8226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64257 +20 +-4.8226 +11 +5.64242 +21 +-4.82129 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64242 +20 +-4.82129 +11 +5.64213 +21 +-4.82 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64213 +20 +-4.82 +11 +5.64213 +21 +-4.61 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64213 +20 +-4.61 +11 +5.64242 +21 +-4.60871 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64242 +20 +-4.60871 +11 +5.64257 +21 +-4.6074 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64257 +20 +-4.6074 +11 +5.64281 +21 +-4.60702 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64281 +20 +-4.60702 +11 +5.64291 +21 +-4.60658 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64291 +20 +-4.60658 +11 +5.64373 +21 +-4.60555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64373 +20 +-4.60555 +11 +5.64443 +21 +-4.60443 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64443 +20 +-4.60443 +11 +5.73943 +21 +-4.50943 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73943 +20 +-4.50943 +11 +5.74055 +21 +-4.50873 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74055 +20 +-4.50873 +11 +5.74158 +21 +-4.50791 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74158 +20 +-4.50791 +11 +5.74202 +21 +-4.50781 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74202 +20 +-4.50781 +11 +5.7424 +21 +-4.50757 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7424 +20 +-4.50757 +11 +5.74371 +21 +-4.50742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74371 +20 +-4.50742 +11 +5.745 +21 +-4.50713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.745 +20 +-4.50713 +11 +5.99174 +21 +-4.50713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99174 +20 +-4.50713 +11 +6.06443 +21 +-4.43443 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06443 +20 +-4.43443 +11 +6.06555 +21 +-4.43373 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06555 +20 +-4.43373 +11 +6.06658 +21 +-4.43291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06658 +20 +-4.43291 +11 +6.06702 +21 +-4.43281 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06702 +20 +-4.43281 +11 +6.0674 +21 +-4.43257 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0674 +20 +-4.43257 +11 +6.06871 +21 +-4.43242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06871 +20 +-4.43242 +11 +6.07 +21 +-4.43213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07 +20 +-4.43213 +11 +6.24174 +21 +-4.43213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24174 +20 +-4.43213 +11 +6.28713 +21 +-4.38674 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28713 +20 +-4.38674 +11 +6.28713 +21 +-4.19326 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28713 +20 +-4.19326 +11 +6.24174 +21 +-4.14787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24174 +20 +-4.14787 +11 +6.21 +21 +-4.14787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21 +20 +-4.14787 +11 +6 +21 +-4.14787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6 +20 +-4.14787 +11 +5.99871 +21 +-4.14758 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99871 +20 +-4.14758 +11 +5.9974 +21 +-4.14743 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9974 +20 +-4.14743 +11 +5.99702 +21 +-4.14719 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99702 +20 +-4.14719 +11 +5.99658 +21 +-4.14709 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99658 +20 +-4.14709 +11 +5.99555 +21 +-4.14627 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99555 +20 +-4.14627 +11 +5.99443 +21 +-4.14557 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99443 +20 +-4.14557 +11 +5.94741 +21 +-4.09854 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94741 +20 +-4.09854 +11 +5.85421 +21 +-4.09854 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85421 +20 +-4.09854 +11 +5.85421 +21 +-4.16744 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85421 +20 +-4.16744 +11 +5.85346 +21 +-4.17121 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85346 +20 +-4.17121 +11 +5.85133 +21 +-4.1744 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85133 +20 +-4.1744 +11 +5.84814 +21 +-4.17653 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84814 +20 +-4.17653 +11 +5.84437 +21 +-4.17728 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84437 +20 +-4.17728 +11 +5.76563 +21 +-4.17728 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76563 +20 +-4.17728 +11 +5.76186 +21 +-4.17653 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76186 +20 +-4.17653 +11 +5.75867 +21 +-4.1744 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75867 +20 +-4.1744 +11 +5.75654 +21 +-4.17121 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75654 +20 +-4.17121 +11 +5.75579 +21 +-4.16744 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75579 +20 +-4.16744 +11 +5.75579 +21 +-4.05259 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75579 +20 +-4.05259 +11 +5.66443 +21 +-3.96124 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66443 +20 +-3.96124 +11 +5.66373 +21 +-3.96012 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66373 +20 +-3.96012 +11 +5.66291 +21 +-3.95909 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66291 +20 +-3.95909 +11 +5.66281 +21 +-3.95865 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66281 +20 +-3.95865 +11 +5.66257 +21 +-3.95827 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66257 +20 +-3.95827 +11 +5.66242 +21 +-3.95696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66242 +20 +-3.95696 +11 +5.66213 +21 +-3.95567 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66213 +20 +-3.95567 +11 +5.66213 +21 +-3.695 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66213 +20 +-3.695 +11 +5.66242 +21 +-3.69371 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66242 +20 +-3.69371 +11 +5.66257 +21 +-3.6924 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66257 +20 +-3.6924 +11 +5.66281 +21 +-3.69202 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66281 +20 +-3.69202 +11 +5.66291 +21 +-3.69158 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66291 +20 +-3.69158 +11 +5.66373 +21 +-3.69055 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66373 +20 +-3.69055 +11 +5.66443 +21 +-3.68943 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66443 +20 +-3.68943 +11 +5.72443 +21 +-3.62943 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72443 +20 +-3.62943 +11 +5.72555 +21 +-3.62873 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72555 +20 +-3.62873 +11 +5.72658 +21 +-3.62791 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72658 +20 +-3.62791 +11 +5.72702 +21 +-3.62781 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72702 +20 +-3.62781 +11 +5.7274 +21 +-3.62757 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7274 +20 +-3.62757 +11 +5.72871 +21 +-3.62742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72871 +20 +-3.62742 +11 +5.73 +21 +-3.62713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73 +20 +-3.62713 +11 +5.90174 +21 +-3.62713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90174 +20 +-3.62713 +11 +5.94713 +21 +-3.58174 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94713 +20 +-3.58174 +11 +5.94713 +21 +-3.28326 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94713 +20 +-3.28326 +11 +5.9067 +21 +-3.24283 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9067 +20 +-3.24283 +11 +5.87945 +21 +-3.24283 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87945 +20 +-3.24283 +11 +5.87568 +21 +-3.24209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87568 +20 +-3.24209 +11 +5.87249 +21 +-3.23995 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87249 +20 +-3.23995 +11 +5.87036 +21 +-3.23676 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87036 +20 +-3.23676 +11 +5.86961 +21 +-3.23299 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86961 +20 +-3.23299 +11 +5.86961 +21 +-3.21331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86961 +20 +-3.21331 +11 +5.87036 +21 +-3.20954 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87036 +20 +-3.20954 +11 +5.87158 +21 +-3.20771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87158 +20 +-3.20771 +11 +5.81943 +21 +-3.15557 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81943 +20 +-3.15557 +11 +5.81873 +21 +-3.15445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81873 +20 +-3.15445 +11 +5.81791 +21 +-3.15342 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81791 +20 +-3.15342 +11 +5.81781 +21 +-3.15298 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81781 +20 +-3.15298 +11 +5.81757 +21 +-3.1526 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81757 +20 +-3.1526 +11 +5.81742 +21 +-3.15129 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81742 +20 +-3.15129 +11 +5.81713 +21 +-3.15 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81713 +20 +-3.15 +11 +5.81713 +21 +-3.11855 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81713 +20 +-3.11855 +11 +5.80993 +21 +-3.11637 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80993 +20 +-3.11637 +11 +5.80313 +21 +-3.11274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80313 +20 +-3.11274 +11 +5.79716 +21 +-3.10784 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79716 +20 +-3.10784 +11 +5.79226 +21 +-3.10187 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79226 +20 +-3.10187 +11 +5.78863 +21 +-3.09507 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78863 +20 +-3.09507 +11 +5.78639 +21 +-3.08768 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78639 +20 +-3.08768 +11 +5.78563 +21 +-3.08 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78563 +20 +-3.08 +11 +5.78639 +21 +-3.07232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78639 +20 +-3.07232 +11 +5.78863 +21 +-3.06493 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78863 +20 +-3.06493 +11 +5.79226 +21 +-3.05813 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79226 +20 +-3.05813 +11 +5.79716 +21 +-3.05216 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79716 +20 +-3.05216 +11 +5.80313 +21 +-3.04726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80313 +20 +-3.04726 +11 +5.80993 +21 +-3.04363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80993 +20 +-3.04363 +11 +5.81713 +21 +-3.04145 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81713 +20 +-3.04145 +11 +5.81713 +21 +-2.95331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81713 +20 +-2.95331 +11 +5.80689 +21 +-2.95331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80689 +20 +-2.95331 +11 +5.80312 +21 +-2.95256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80312 +20 +-2.95256 +11 +5.79993 +21 +-2.95042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79993 +20 +-2.95042 +11 +5.7978 +21 +-2.94723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7978 +20 +-2.94723 +11 +5.79705 +21 +-2.94346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79705 +20 +-2.94346 +11 +5.79705 +21 +-2.90803 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79705 +20 +-2.90803 +11 +5.7978 +21 +-2.90426 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7978 +20 +-2.90426 +11 +5.79993 +21 +-2.90107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79993 +20 +-2.90107 +11 +5.80312 +21 +-2.89894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80312 +20 +-2.89894 +11 +5.80689 +21 +-2.89819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80689 +20 +-2.89819 +11 +5.82756 +21 +-2.89819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82756 +20 +-2.89819 +11 +5.83133 +21 +-2.89894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83133 +20 +-2.89894 +11 +5.83452 +21 +-2.90107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83452 +20 +-2.90107 +11 +5.83665 +21 +-2.90426 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83665 +20 +-2.90426 +11 +5.8374 +21 +-2.90803 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8374 +20 +-2.90803 +11 +5.8374 +21 +-2.94346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8374 +20 +-2.94346 +11 +5.83665 +21 +-2.94723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83665 +20 +-2.94723 +11 +5.83452 +21 +-2.95042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83452 +20 +-2.95042 +11 +5.83287 +21 +-2.95152 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83287 +20 +-2.95152 +11 +5.83287 +21 +-3.04145 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83287 +20 +-3.04145 +11 +5.84007 +21 +-3.04363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84007 +20 +-3.04363 +11 +5.84687 +21 +-3.04726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84687 +20 +-3.04726 +11 +5.85284 +21 +-3.05216 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85284 +20 +-3.05216 +11 +5.85774 +21 +-3.05813 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85774 +20 +-3.05813 +11 +5.86137 +21 +-3.06493 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86137 +20 +-3.06493 +11 +5.86361 +21 +-3.07232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86361 +20 +-3.07232 +11 +5.86437 +21 +-3.08 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86437 +20 +-3.08 +11 +5.86361 +21 +-3.08768 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86361 +20 +-3.08768 +11 +5.86137 +21 +-3.09507 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86137 +20 +-3.09507 +11 +5.85774 +21 +-3.10187 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85774 +20 +-3.10187 +11 +5.85284 +21 +-3.10784 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85284 +20 +-3.10784 +11 +5.84687 +21 +-3.11274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84687 +20 +-3.11274 +11 +5.84007 +21 +-3.11637 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84007 +20 +-3.11637 +11 +5.83287 +21 +-3.11855 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83287 +20 +-3.11855 +11 +5.83287 +21 +-3.14674 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83287 +20 +-3.14674 +11 +5.8896 +21 +-3.20346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8896 +20 +-3.20346 +11 +5.91685 +21 +-3.20346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91685 +20 +-3.20346 +11 +5.92062 +21 +-3.20421 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92062 +20 +-3.20421 +11 +5.92381 +21 +-3.20635 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92381 +20 +-3.20635 +11 +5.92594 +21 +-3.20954 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92594 +20 +-3.20954 +11 +5.92669 +21 +-3.21331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92669 +20 +-3.21331 +11 +5.92669 +21 +-3.23299 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92669 +20 +-3.23299 +11 +5.92594 +21 +-3.23676 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92594 +20 +-3.23676 +11 +5.92472 +21 +-3.23859 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92472 +20 +-3.23859 +11 +5.96057 +21 +-3.27443 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96057 +20 +-3.27443 +11 +5.96127 +21 +-3.27555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96127 +20 +-3.27555 +11 +5.96209 +21 +-3.27658 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96209 +20 +-3.27658 +11 +5.96219 +21 +-3.27702 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96219 +20 +-3.27702 +11 +5.96243 +21 +-3.2774 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96243 +20 +-3.2774 +11 +5.96258 +21 +-3.27871 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96258 +20 +-3.27871 +11 +5.96287 +21 +-3.28 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96287 +20 +-3.28 +11 +5.96287 +21 +-3.585 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96287 +20 +-3.585 +11 +5.96258 +21 +-3.58629 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96258 +20 +-3.58629 +11 +5.96243 +21 +-3.5876 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96243 +20 +-3.5876 +11 +5.96219 +21 +-3.58798 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96219 +20 +-3.58798 +11 +5.96209 +21 +-3.58842 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96209 +20 +-3.58842 +11 +5.96127 +21 +-3.58945 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96127 +20 +-3.58945 +11 +5.96057 +21 +-3.59057 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96057 +20 +-3.59057 +11 +5.91057 +21 +-3.64057 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91057 +20 +-3.64057 +11 +5.90945 +21 +-3.64127 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90945 +20 +-3.64127 +11 +5.90842 +21 +-3.64209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90842 +20 +-3.64209 +11 +5.90798 +21 +-3.64219 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90798 +20 +-3.64219 +11 +5.9076 +21 +-3.64243 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9076 +20 +-3.64243 +11 +5.90629 +21 +-3.64258 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90629 +20 +-3.64258 +11 +5.905 +21 +-3.64287 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.905 +20 +-3.64287 +11 +5.73326 +21 +-3.64287 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73326 +20 +-3.64287 +11 +5.67787 +21 +-3.69826 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67787 +20 +-3.69826 +11 +5.67787 +21 +-3.95241 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67787 +20 +-3.95241 +11 +5.75579 +21 +-4.03032 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75579 +20 +-4.03032 +11 +5.75579 +21 +-4.0139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75579 +20 +-4.0139 +11 +5.75654 +21 +-4.01013 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75654 +20 +-4.01013 +11 +5.75867 +21 +-4.00694 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75867 +20 +-4.00694 +11 +5.76186 +21 +-4.0048 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76186 +20 +-4.0048 +11 +5.76563 +21 +-4.00406 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76563 +20 +-4.00406 +11 +5.84437 +21 +-4.00406 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84437 +20 +-4.00406 +11 +5.84814 +21 +-4.0048 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84814 +20 +-4.0048 +11 +5.85133 +21 +-4.00694 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85133 +20 +-4.00694 +11 +5.85346 +21 +-4.01013 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85346 +20 +-4.01013 +11 +5.85421 +21 +-4.0139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85421 +20 +-4.0139 +11 +5.85421 +21 +-4.03032 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85421 +20 +-4.03032 +11 +6.1128 +21 +-3.77174 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1128 +20 +-3.77174 +11 +6.1128 +21 +-3.53921 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1128 +20 +-3.53921 +11 +6.0439 +21 +-3.53921 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0439 +20 +-3.53921 +11 +6.04013 +21 +-3.53846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04013 +20 +-3.53846 +11 +6.03694 +21 +-3.53633 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03694 +20 +-3.53633 +11 +6.0348 +21 +-3.53314 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0348 +20 +-3.53314 +11 +6.03406 +21 +-3.52937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03406 +20 +-3.52937 +11 +6.03406 +21 +-3.45063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03406 +20 +-3.45063 +11 +6.0348 +21 +-3.44686 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0348 +20 +-3.44686 +11 +6.03694 +21 +-3.44367 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03694 +20 +-3.44367 +11 +6.04013 +21 +-3.44154 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04013 +20 +-3.44154 +11 +6.0439 +21 +-3.44079 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0439 +20 +-3.44079 +11 +6.19744 +21 +-3.44079 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19744 +20 +-3.44079 +11 +6.20121 +21 +-3.44154 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20121 +20 +-3.44154 +11 +6.2044 +21 +-3.44367 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2044 +20 +-3.44367 +11 +6.20653 +21 +-3.44686 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20653 +20 +-3.44686 +11 +6.20728 +21 +-3.45063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20728 +20 +-3.45063 +11 +6.20728 +21 +-3.52937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20728 +20 +-3.52937 +11 +6.20653 +21 +-3.53314 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20653 +20 +-3.53314 +11 +6.2044 +21 +-3.53633 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2044 +20 +-3.53633 +11 +6.20121 +21 +-3.53846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20121 +20 +-3.53846 +11 +6.19744 +21 +-3.53921 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19744 +20 +-3.53921 +11 +6.12854 +21 +-3.53921 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12854 +20 +-3.53921 +11 +6.12854 +21 +-3.775 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12854 +20 +-3.775 +11 +6.12825 +21 +-3.77629 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12825 +20 +-3.77629 +11 +6.1281 +21 +-3.7776 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1281 +20 +-3.7776 +11 +6.12786 +21 +-3.77798 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12786 +20 +-3.77798 +11 +6.12776 +21 +-3.77842 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12776 +20 +-3.77842 +11 +6.12694 +21 +-3.77945 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12694 +20 +-3.77945 +11 +6.12624 +21 +-3.78057 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12624 +20 +-3.78057 +11 +5.85421 +21 +-4.05259 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85421 +20 +-4.05259 +11 +5.85421 +21 +-4.0828 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85421 +20 +-4.0828 +11 +5.95067 +21 +-4.0828 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95067 +20 +-4.0828 +11 +5.95196 +21 +-4.08309 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95196 +20 +-4.08309 +11 +5.95327 +21 +-4.08324 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95327 +20 +-4.08324 +11 +5.95365 +21 +-4.08348 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95365 +20 +-4.08348 +11 +5.95409 +21 +-4.08358 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95409 +20 +-4.08358 +11 +5.95512 +21 +-4.0844 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95512 +20 +-4.0844 +11 +5.95624 +21 +-4.0851 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95624 +20 +-4.0851 +11 +6.00326 +21 +-4.13213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00326 +20 +-4.13213 +11 +6.19099 +21 +-4.13213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19099 +20 +-4.13213 +11 +6.12717 +21 +-4.0683 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12717 +20 +-4.0683 +11 +6.12647 +21 +-4.06719 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12647 +20 +-4.06719 +11 +6.12564 +21 +-4.06615 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12564 +20 +-4.06615 +11 +6.12554 +21 +-4.06572 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12554 +20 +-4.06572 +11 +6.1253 +21 +-4.06534 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1253 +20 +-4.06534 +11 +6.12516 +21 +-4.06402 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12516 +20 +-4.06402 +11 +6.12486 +21 +-4.06274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12486 +20 +-4.06274 +11 +6.12486 +21 +-4.04921 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12486 +20 +-4.04921 +11 +6.05596 +21 +-4.04921 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05596 +20 +-4.04921 +11 +6.0522 +21 +-4.04846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0522 +20 +-4.04846 +11 +6.049 +21 +-4.04633 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.049 +20 +-4.04633 +11 +6.04687 +21 +-4.04314 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04687 +20 +-4.04314 +11 +6.04612 +21 +-4.03937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04612 +20 +-4.03937 +11 +6.04612 +21 +-3.96063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04612 +20 +-3.96063 +11 +6.04687 +21 +-3.95686 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04687 +20 +-3.95686 +11 +6.049 +21 +-3.95367 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.049 +20 +-3.95367 +11 +6.0522 +21 +-3.95154 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0522 +20 +-3.95154 +11 +6.05596 +21 +-3.95079 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05596 +20 +-3.95079 +11 +6.20951 +21 +-3.95079 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20951 +20 +-3.95079 +11 +6.21327 +21 +-3.95154 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21327 +20 +-3.95154 +11 +6.21647 +21 +-3.95367 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21647 +20 +-3.95367 +11 +6.2186 +21 +-3.95686 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2186 +20 +-3.95686 +11 +6.21935 +21 +-3.96063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21935 +20 +-3.96063 +11 +6.21935 +21 +-4.00321 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21935 +20 +-4.00321 +11 +6.39326 +21 +-4.17713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39326 +20 +-4.17713 +11 +6.49174 +21 +-4.17713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49174 +20 +-4.17713 +11 +6.55713 +21 +-4.11174 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55713 +20 +-4.11174 +11 +6.55713 +21 +-3.85153 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55713 +20 +-3.85153 +11 +6.39846 +21 +-3.69287 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39846 +20 +-3.69287 +11 +6.39846 +21 +-3.70339 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39846 +20 +-3.70339 +11 +6.39772 +21 +-3.70715 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39772 +20 +-3.70715 +11 +6.39558 +21 +-3.71035 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39558 +20 +-3.71035 +11 +6.39239 +21 +-3.71248 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39239 +20 +-3.71248 +11 +6.38862 +21 +-3.71323 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38862 +20 +-3.71323 +11 +6.34138 +21 +-3.71323 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34138 +20 +-3.71323 +11 +6.33761 +21 +-3.71248 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33761 +20 +-3.71248 +11 +6.33442 +21 +-3.71035 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33442 +20 +-3.71035 +11 +6.33228 +21 +-3.70715 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33228 +20 +-3.70715 +11 +6.33154 +21 +-3.70339 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33154 +20 +-3.70339 +11 +6.33154 +21 +-3.59315 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33154 +20 +-3.59315 +11 +6.33228 +21 +-3.58938 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33228 +20 +-3.58938 +11 +6.33442 +21 +-3.58619 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33442 +20 +-3.58619 +11 +6.33761 +21 +-3.58406 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33761 +20 +-3.58406 +11 +6.34138 +21 +-3.58331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34138 +20 +-3.58331 +11 +6.38862 +21 +-3.58331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38862 +20 +-3.58331 +11 +6.39239 +21 +-3.58406 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39239 +20 +-3.58406 +11 +6.39558 +21 +-3.58619 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39558 +20 +-3.58619 +11 +6.39772 +21 +-3.58938 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39772 +20 +-3.58938 +11 +6.39846 +21 +-3.59315 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39846 +20 +-3.59315 +11 +6.39846 +21 +-3.6204 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39846 +20 +-3.6204 +11 +6.43247 +21 +-3.5864 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43247 +20 +-3.5864 +11 +6.43221 +21 +-3.58601 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43221 +20 +-3.58601 +11 +6.43146 +21 +-3.58224 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43146 +20 +-3.58224 +11 +6.43146 +21 +-3.56256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43146 +20 +-3.56256 +11 +6.43221 +21 +-3.55879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43221 +20 +-3.55879 +11 +6.43434 +21 +-3.5556 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43434 +20 +-3.5556 +11 +6.43753 +21 +-3.55347 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43753 +20 +-3.55347 +11 +6.4413 +21 +-3.55272 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4413 +20 +-3.55272 +11 +6.4787 +21 +-3.55272 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4787 +20 +-3.55272 +11 +6.48247 +21 +-3.55347 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48247 +20 +-3.55347 +11 +6.48566 +21 +-3.5556 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48566 +20 +-3.5556 +11 +6.48779 +21 +-3.55879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48779 +20 +-3.55879 +11 +6.48854 +21 +-3.56256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48854 +20 +-3.56256 +11 +6.48854 +21 +-3.56453 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48854 +20 +-3.56453 +11 +6.50434 +21 +-3.56453 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50434 +20 +-3.56453 +11 +6.56213 +21 +-3.50674 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56213 +20 +-3.50674 +11 +6.56213 +21 +-3.28362 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56213 +20 +-3.28362 +11 +6.255 +21 +-3.28362 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.255 +20 +-3.28362 +11 +6.25371 +21 +-3.28333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25371 +20 +-3.28333 +11 +6.2524 +21 +-3.28318 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2524 +20 +-3.28318 +11 +6.25202 +21 +-3.28294 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25202 +20 +-3.28294 +11 +6.25158 +21 +-3.28284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25158 +20 +-3.28284 +11 +6.25055 +21 +-3.28202 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25055 +20 +-3.28202 +11 +6.24943 +21 +-3.28132 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24943 +20 +-3.28132 +11 +6.23943 +21 +-3.27132 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23943 +20 +-3.27132 +11 +6.23873 +21 +-3.2702 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23873 +20 +-3.2702 +11 +6.23791 +21 +-3.26916 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23791 +20 +-3.26916 +11 +6.23781 +21 +-3.26873 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23781 +20 +-3.26873 +11 +6.23757 +21 +-3.26835 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23757 +20 +-3.26835 +11 +6.23742 +21 +-3.26704 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23742 +20 +-3.26704 +11 +6.23713 +21 +-3.26575 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23713 +20 +-3.26575 +11 +6.23713 +21 +-3.15976 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23713 +20 +-3.15976 +11 +6.22057 +21 +-3.17632 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22057 +20 +-3.17632 +11 +6.21945 +21 +-3.17702 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21945 +20 +-3.17702 +11 +6.21842 +21 +-3.17784 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21842 +20 +-3.17784 +11 +6.21798 +21 +-3.17794 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21798 +20 +-3.17794 +11 +6.2176 +21 +-3.17818 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2176 +20 +-3.17818 +11 +6.21629 +21 +-3.17833 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21629 +20 +-3.17833 +11 +6.215 +21 +-3.17862 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.215 +20 +-3.17862 +11 +6.14 +21 +-3.17862 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14 +20 +-3.17862 +11 +6.13871 +21 +-3.17833 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13871 +20 +-3.17833 +11 +6.1374 +21 +-3.17818 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1374 +20 +-3.17818 +11 +6.13702 +21 +-3.17794 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13702 +20 +-3.17794 +11 +6.13658 +21 +-3.17784 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13658 +20 +-3.17784 +11 +6.13555 +21 +-3.17702 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13555 +20 +-3.17702 +11 +6.13443 +21 +-3.17632 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13443 +20 +-3.17632 +11 +6.10443 +21 +-3.14632 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10443 +20 +-3.14632 +11 +6.10373 +21 +-3.1452 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10373 +20 +-3.1452 +11 +6.10291 +21 +-3.14416 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10291 +20 +-3.14416 +11 +6.10281 +21 +-3.14373 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10281 +20 +-3.14373 +11 +6.10257 +21 +-3.14335 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10257 +20 +-3.14335 +11 +6.10242 +21 +-3.14204 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10242 +20 +-3.14204 +11 +6.10213 +21 +-3.14075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10213 +20 +-3.14075 +11 +6.10213 +21 +-2.90362 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10213 +20 +-2.90362 +11 +6.095 +21 +-2.90362 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.095 +20 +-2.90362 +11 +6.09371 +21 +-2.90333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09371 +20 +-2.90333 +11 +6.0924 +21 +-2.90318 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0924 +20 +-2.90318 +11 +6.09202 +21 +-2.90294 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09202 +20 +-2.90294 +11 +6.09158 +21 +-2.90284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09158 +20 +-2.90284 +11 +6.09055 +21 +-2.90202 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09055 +20 +-2.90202 +11 +6.08943 +21 +-2.90132 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08943 +20 +-2.90132 +11 +6.02943 +21 +-2.84132 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02943 +20 +-2.84132 +11 +6.02873 +21 +-2.8402 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02873 +20 +-2.8402 +11 +6.02791 +21 +-2.83916 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02791 +20 +-2.83916 +11 +6.02781 +21 +-2.83873 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02781 +20 +-2.83873 +11 +6.02757 +21 +-2.83835 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02757 +20 +-2.83835 +11 +6.02742 +21 +-2.83704 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02742 +20 +-2.83704 +11 +6.02713 +21 +-2.83575 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02713 +20 +-2.83575 +11 +6.02713 +21 +-2.62 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02713 +20 +-2.62 +11 +6.02742 +21 +-2.61871 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02742 +20 +-2.61871 +11 +6.02757 +21 +-2.6174 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02757 +20 +-2.6174 +11 +6.02781 +21 +-2.61702 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02781 +20 +-2.61702 +11 +6.02791 +21 +-2.61658 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02791 +20 +-2.61658 +11 +6.02873 +21 +-2.61555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02873 +20 +-2.61555 +11 +6.02943 +21 +-2.61443 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02943 +20 +-2.61443 +11 +6.11713 +21 +-2.52674 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11713 +20 +-2.52674 +11 +6.11713 +21 +-2.43 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11713 +20 +-2.43 +11 +6.11742 +21 +-2.42871 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11742 +20 +-2.42871 +11 +6.11757 +21 +-2.4274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11757 +20 +-2.4274 +11 +6.11781 +21 +-2.42702 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11781 +20 +-2.42702 +11 +6.11791 +21 +-2.42658 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11791 +20 +-2.42658 +11 +6.11873 +21 +-2.42555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11873 +20 +-2.42555 +11 +6.11943 +21 +-2.42443 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11943 +20 +-2.42443 +11 +6.33443 +21 +-2.20943 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33443 +20 +-2.20943 +11 +6.33555 +21 +-2.20873 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33555 +20 +-2.20873 +11 +6.33658 +21 +-2.20791 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33658 +20 +-2.20791 +11 +6.33702 +21 +-2.20781 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33702 +20 +-2.20781 +11 +6.3374 +21 +-2.20757 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3374 +20 +-2.20757 +11 +6.33871 +21 +-2.20742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33871 +20 +-2.20742 +11 +6.34 +21 +-2.20713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34 +20 +-2.20713 +11 +6.46925 +21 +-2.20713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46925 +20 +-2.20713 +11 +6.47054 +21 +-2.20742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34326 +20 +-2.22287 +11 +6.13287 +21 +-2.43326 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13287 +20 +-2.43326 +11 +6.13287 +21 +-2.53 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13287 +20 +-2.53 +11 +6.13258 +21 +-2.53129 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13258 +20 +-2.53129 +11 +6.13243 +21 +-2.5326 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13243 +20 +-2.5326 +11 +6.13219 +21 +-2.53298 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13219 +20 +-2.53298 +11 +6.13209 +21 +-2.53342 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13209 +20 +-2.53342 +11 +6.13127 +21 +-2.53445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13127 +20 +-2.53445 +11 +6.13057 +21 +-2.53557 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13057 +20 +-2.53557 +11 +6.04287 +21 +-2.62326 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04287 +20 +-2.62326 +11 +6.04287 +21 +-2.83249 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04287 +20 +-2.83249 +11 +6.09826 +21 +-2.88787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09826 +20 +-2.88787 +11 +6.1082 +21 +-2.88787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1082 +20 +-2.88787 +11 +6.1082 +21 +-2.84724 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1082 +20 +-2.84724 +11 +6.09737 +21 +-2.84724 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09737 +20 +-2.84724 +11 +6.09361 +21 +-2.84649 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09361 +20 +-2.84649 +11 +6.09041 +21 +-2.84435 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09041 +20 +-2.84435 +11 +6.08828 +21 +-2.84116 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08828 +20 +-2.84116 +11 +6.08753 +21 +-2.83739 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08753 +20 +-2.83739 +11 +6.08753 +21 +-2.81771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08753 +20 +-2.81771 +11 +6.08828 +21 +-2.81394 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08828 +20 +-2.81394 +11 +6.09041 +21 +-2.81075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09041 +20 +-2.81075 +11 +6.09361 +21 +-2.80862 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09361 +20 +-2.80862 +11 +6.09737 +21 +-2.80787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09737 +20 +-2.80787 +11 +6.13478 +21 +-2.80787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13478 +20 +-2.80787 +11 +6.13854 +21 +-2.80862 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13854 +20 +-2.80862 +11 +6.14174 +21 +-2.81075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14174 +20 +-2.81075 +11 +6.14387 +21 +-2.81394 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14387 +20 +-2.81394 +11 +6.14462 +21 +-2.81771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14462 +20 +-2.81771 +11 +6.14462 +21 +-2.83739 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14462 +20 +-2.83739 +11 +6.14387 +21 +-2.84116 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14387 +20 +-2.84116 +11 +6.14174 +21 +-2.84435 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14174 +20 +-2.84435 +11 +6.13854 +21 +-2.84649 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13854 +20 +-2.84649 +11 +6.13478 +21 +-2.84724 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13478 +20 +-2.84724 +11 +6.12395 +21 +-2.84724 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12395 +20 +-2.84724 +11 +6.12395 +21 +-2.89575 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12395 +20 +-2.89575 +11 +6.12375 +21 +-2.89661 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12375 +20 +-2.89661 +11 +6.12375 +21 +-2.8975 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12375 +20 +-2.8975 +11 +6.12356 +21 +-2.8979 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12356 +20 +-2.8979 +11 +6.12351 +21 +-2.89835 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12351 +20 +-2.89835 +11 +6.12327 +21 +-2.89873 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12327 +20 +-2.89873 +11 +6.12317 +21 +-2.89916 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12317 +20 +-2.89916 +11 +6.12262 +21 +-2.89986 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12262 +20 +-2.89986 +11 +6.12223 +21 +-2.90066 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12223 +20 +-2.90066 +11 +6.12188 +21 +-2.90094 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12188 +20 +-2.90094 +11 +6.12164 +21 +-2.90132 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12164 +20 +-2.90132 +11 +6.11787 +21 +-2.90508 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11787 +20 +-2.90508 +11 +6.11787 +21 +-3.13749 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11787 +20 +-3.13749 +11 +6.14326 +21 +-3.16287 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14326 +20 +-3.16287 +11 +6.21174 +21 +-3.16287 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21174 +20 +-3.16287 +11 +6.2276 +21 +-3.14701 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2276 +20 +-3.14701 +11 +6.2276 +21 +-3.14069 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2276 +20 +-3.14069 +11 +6.22563 +21 +-3.14069 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22563 +20 +-3.14069 +11 +6.22187 +21 +-3.13994 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22187 +20 +-3.13994 +11 +6.21867 +21 +-3.13781 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21867 +20 +-3.13781 +11 +6.21654 +21 +-3.13462 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21654 +20 +-3.13462 +11 +6.21579 +21 +-3.13085 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21579 +20 +-3.13085 +11 +6.21579 +21 +-3.09345 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21579 +20 +-3.09345 +11 +6.21654 +21 +-3.08968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21654 +20 +-3.08968 +11 +6.21867 +21 +-3.08649 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21867 +20 +-3.08649 +11 +6.22187 +21 +-3.08436 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22187 +20 +-3.08436 +11 +6.22563 +21 +-3.08361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22563 +20 +-3.08361 +11 +6.24532 +21 +-3.08361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24532 +20 +-3.08361 +11 +6.24909 +21 +-3.08436 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24909 +20 +-3.08436 +11 +6.25228 +21 +-3.08649 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25228 +20 +-3.08649 +11 +6.25441 +21 +-3.08968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25441 +20 +-3.08968 +11 +6.25516 +21 +-3.09345 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25516 +20 +-3.09345 +11 +6.25516 +21 +-3.13085 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25516 +20 +-3.13085 +11 +6.25441 +21 +-3.13462 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25441 +20 +-3.13462 +11 +6.25287 +21 +-3.13692 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25287 +20 +-3.13692 +11 +6.25287 +21 +-3.26249 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25287 +20 +-3.26249 +11 +6.25826 +21 +-3.26787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25826 +20 +-3.26787 +11 +6.56674 +21 +-3.26787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56674 +20 +-3.26787 +11 +6.61213 +21 +-3.22249 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61213 +20 +-3.22249 +11 +6.61213 +21 +-2.95401 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61213 +20 +-2.95401 +11 +6.61174 +21 +-2.95362 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61174 +20 +-2.95362 +11 +6.49789 +21 +-2.95362 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49789 +20 +-2.95362 +11 +6.49789 +21 +-2.98107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49789 +20 +-2.98107 +11 +6.49744 +21 +-2.98333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49744 +20 +-2.98333 +11 +6.49616 +21 +-2.98525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49616 +20 +-2.98525 +11 +6.49424 +21 +-2.98653 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49424 +20 +-2.98653 +11 +6.49198 +21 +-2.98698 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49198 +20 +-2.98698 +11 +6.48017 +21 +-2.98698 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48017 +20 +-2.98698 +11 +6.47791 +21 +-2.98653 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47791 +20 +-2.98653 +11 +6.47599 +21 +-2.98525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47599 +20 +-2.98525 +11 +6.47471 +21 +-2.98333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47471 +20 +-2.98333 +11 +6.47426 +21 +-2.98107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47426 +20 +-2.98107 +11 +6.47426 +21 +-2.91611 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47426 +20 +-2.91611 +11 +6.47471 +21 +-2.91385 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47471 +20 +-2.91385 +11 +6.47599 +21 +-2.91193 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47599 +20 +-2.91193 +11 +6.47791 +21 +-2.91065 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47791 +20 +-2.91065 +11 +6.48017 +21 +-2.9102 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48017 +20 +-2.9102 +11 +6.49198 +21 +-2.9102 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49198 +20 +-2.9102 +11 +6.49424 +21 +-2.91065 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49424 +20 +-2.91065 +11 +6.49616 +21 +-2.91193 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49616 +20 +-2.91193 +11 +6.49744 +21 +-2.91385 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49744 +20 +-2.91385 +11 +6.49789 +21 +-2.91611 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49789 +20 +-2.91611 +11 +6.49789 +21 +-2.93787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49789 +20 +-2.93787 +11 +6.615 +21 +-2.93787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.615 +20 +-2.93787 +11 +6.63174 +21 +-2.93787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63174 +20 +-2.93787 +11 +6.65713 +21 +-2.91249 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65713 +20 +-2.91249 +11 +6.65713 +21 +-2.52901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65713 +20 +-2.52901 +11 +6.6 +21 +-2.47188 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6 +20 +-2.47188 +11 +6.59557 +21 +-2.47632 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59557 +20 +-2.47632 +11 +6.59445 +21 +-2.47702 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59445 +20 +-2.47702 +11 +6.59342 +21 +-2.47784 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59342 +20 +-2.47784 +11 +6.59298 +21 +-2.47794 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59298 +20 +-2.47794 +11 +6.5926 +21 +-2.47818 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5926 +20 +-2.47818 +11 +6.59129 +21 +-2.47833 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59129 +20 +-2.47833 +11 +6.59 +21 +-2.47862 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59 +20 +-2.47862 +11 +6.5326 +21 +-2.47862 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5326 +20 +-2.47862 +11 +6.53131 +21 +-2.47833 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53131 +20 +-2.47833 +11 +6.53 +21 +-2.47818 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53 +20 +-2.47818 +11 +6.52962 +21 +-2.47794 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52962 +20 +-2.47794 +11 +6.52918 +21 +-2.47784 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52918 +20 +-2.47784 +11 +6.52917 +21 +-2.47783 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52917 +20 +-2.47783 +11 +6.5013 +21 +-2.47783 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5013 +20 +-2.47783 +11 +6.49753 +21 +-2.47709 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49753 +20 +-2.47709 +11 +6.49434 +21 +-2.47495 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49434 +20 +-2.47495 +11 +6.49221 +21 +-2.47176 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49221 +20 +-2.47176 +11 +6.49146 +21 +-2.46799 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49146 +20 +-2.46799 +11 +6.49146 +21 +-2.46602 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49146 +20 +-2.46602 +11 +6.45316 +21 +-2.46602 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45316 +20 +-2.46602 +11 +6.45316 +21 +-2.48445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45316 +20 +-2.48445 +11 +6.45241 +21 +-2.48822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45241 +20 +-2.48822 +11 +6.45028 +21 +-2.49141 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45028 +20 +-2.49141 +11 +6.44709 +21 +-2.49354 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44709 +20 +-2.49354 +11 +6.44332 +21 +-2.49429 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44332 +20 +-2.49429 +11 +6.42363 +21 +-2.49429 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42363 +20 +-2.49429 +11 +6.41987 +21 +-2.49354 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41987 +20 +-2.49354 +11 +6.41667 +21 +-2.49141 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41667 +20 +-2.49141 +11 +6.41454 +21 +-2.48822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41454 +20 +-2.48822 +11 +6.41379 +21 +-2.48445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41379 +20 +-2.48445 +11 +6.41379 +21 +-2.44705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41379 +20 +-2.44705 +11 +6.41454 +21 +-2.44328 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41454 +20 +-2.44328 +11 +6.41667 +21 +-2.44009 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41667 +20 +-2.44009 +11 +6.41987 +21 +-2.43795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41987 +20 +-2.43795 +11 +6.42363 +21 +-2.4372 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42363 +20 +-2.4372 +11 +6.44332 +21 +-2.4372 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44332 +20 +-2.4372 +11 +6.44709 +21 +-2.43795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44709 +20 +-2.43795 +11 +6.45028 +21 +-2.44009 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45028 +20 +-2.44009 +11 +6.45241 +21 +-2.44328 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45241 +20 +-2.44328 +11 +6.45316 +21 +-2.44705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45316 +20 +-2.44705 +11 +6.45316 +21 +-2.45028 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45316 +20 +-2.45028 +11 +6.49146 +21 +-2.45028 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49146 +20 +-2.45028 +11 +6.49146 +21 +-2.44831 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49146 +20 +-2.44831 +11 +6.49221 +21 +-2.44454 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49221 +20 +-2.44454 +11 +6.49434 +21 +-2.44135 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49434 +20 +-2.44135 +11 +6.49753 +21 +-2.43921 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49753 +20 +-2.43921 +11 +6.5013 +21 +-2.43846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5013 +20 +-2.43846 +11 +6.5387 +21 +-2.43846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5387 +20 +-2.43846 +11 +6.54247 +21 +-2.43921 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54247 +20 +-2.43921 +11 +6.54566 +21 +-2.44135 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54566 +20 +-2.44135 +11 +6.54779 +21 +-2.44454 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54779 +20 +-2.44454 +11 +6.54854 +21 +-2.44831 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54854 +20 +-2.44831 +11 +6.54854 +21 +-2.46287 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54854 +20 +-2.46287 +11 +6.58674 +21 +-2.46287 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58674 +20 +-2.46287 +11 +6.59213 +21 +-2.45749 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59213 +20 +-2.45749 +11 +6.59213 +21 +-2.34901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59213 +20 +-2.34901 +11 +6.46599 +21 +-2.22287 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46599 +20 +-2.22287 +11 +6.34326 +21 +-2.22287 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43768 +20 +-4.25639 +11 +6.44507 +21 +-4.25863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44507 +20 +-4.25863 +11 +6.45187 +21 +-4.26226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45187 +20 +-4.26226 +11 +6.45784 +21 +-4.26716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45784 +20 +-4.26716 +11 +6.46274 +21 +-4.27313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46274 +20 +-4.27313 +11 +6.46637 +21 +-4.27993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46637 +20 +-4.27993 +11 +6.46861 +21 +-4.28732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46861 +20 +-4.28732 +11 +6.46937 +21 +-4.295 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46937 +20 +-4.295 +11 +6.46861 +21 +-4.30268 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46861 +20 +-4.30268 +11 +6.46637 +21 +-4.31007 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46637 +20 +-4.31007 +11 +6.46274 +21 +-4.31687 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46274 +20 +-4.31687 +11 +6.45784 +21 +-4.32284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45784 +20 +-4.32284 +11 +6.45187 +21 +-4.32774 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45187 +20 +-4.32774 +11 +6.44507 +21 +-4.33137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44507 +20 +-4.33137 +11 +6.43787 +21 +-4.33355 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43787 +20 +-4.33355 +11 +6.43787 +21 +-4.62244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43787 +20 +-4.62244 +11 +6.44033 +21 +-4.62244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44033 +20 +-4.62244 +11 +6.4441 +21 +-4.62319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4441 +20 +-4.62319 +11 +6.44729 +21 +-4.62532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44729 +20 +-4.62532 +11 +6.44943 +21 +-4.62852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44943 +20 +-4.62852 +11 +6.45018 +21 +-4.63228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45018 +20 +-4.63228 +11 +6.45018 +21 +-4.66772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45018 +20 +-4.66772 +11 +6.44943 +21 +-4.67148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44943 +20 +-4.67148 +11 +6.44729 +21 +-4.67468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44729 +20 +-4.67468 +11 +6.4441 +21 +-4.67681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4441 +20 +-4.67681 +11 +6.44033 +21 +-4.67756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44033 +20 +-4.67756 +11 +6.43787 +21 +-4.67756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43787 +20 +-4.67756 +11 +6.43787 +21 +-4.71244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43787 +20 +-4.71244 +11 +6.44033 +21 +-4.71244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44033 +20 +-4.71244 +11 +6.4441 +21 +-4.71319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4441 +20 +-4.71319 +11 +6.44729 +21 +-4.71532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44729 +20 +-4.71532 +11 +6.44943 +21 +-4.71852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44943 +20 +-4.71852 +11 +6.45018 +21 +-4.72228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45018 +20 +-4.72228 +11 +6.45018 +21 +-4.75772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45018 +20 +-4.75772 +11 +6.44943 +21 +-4.76148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44943 +20 +-4.76148 +11 +6.44729 +21 +-4.76468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44729 +20 +-4.76468 +11 +6.4441 +21 +-4.76681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4441 +20 +-4.76681 +11 +6.44033 +21 +-4.76756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44033 +20 +-4.76756 +11 +6.41967 +21 +-4.76756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41967 +20 +-4.76756 +11 +6.4159 +21 +-4.76681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4159 +20 +-4.76681 +11 +6.41271 +21 +-4.76468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41271 +20 +-4.76468 +11 +6.41057 +21 +-4.76148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41057 +20 +-4.76148 +11 +6.40982 +21 +-4.75772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40982 +20 +-4.75772 +11 +6.40982 +21 +-4.72228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40982 +20 +-4.72228 +11 +6.41057 +21 +-4.71852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41057 +20 +-4.71852 +11 +6.41271 +21 +-4.71532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41271 +20 +-4.71532 +11 +6.4159 +21 +-4.71319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4159 +20 +-4.71319 +11 +6.41967 +21 +-4.71244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41967 +20 +-4.71244 +11 +6.42213 +21 +-4.71244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42213 +20 +-4.71244 +11 +6.42213 +21 +-4.67756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42213 +20 +-4.67756 +11 +6.41967 +21 +-4.67756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41967 +20 +-4.67756 +11 +6.4159 +21 +-4.67681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4159 +20 +-4.67681 +11 +6.41271 +21 +-4.67468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41271 +20 +-4.67468 +11 +6.41057 +21 +-4.67148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41057 +20 +-4.67148 +11 +6.40982 +21 +-4.66772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40982 +20 +-4.66772 +11 +6.40982 +21 +-4.63228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40982 +20 +-4.63228 +11 +6.41057 +21 +-4.62852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41057 +20 +-4.62852 +11 +6.41271 +21 +-4.62532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41271 +20 +-4.62532 +11 +6.4159 +21 +-4.62319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4159 +20 +-4.62319 +11 +6.41967 +21 +-4.62244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41967 +20 +-4.62244 +11 +6.42213 +21 +-4.62244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42213 +20 +-4.62244 +11 +6.42213 +21 +-4.33355 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42213 +20 +-4.33355 +11 +6.41493 +21 +-4.33137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41493 +20 +-4.33137 +11 +6.40813 +21 +-4.32774 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40813 +20 +-4.32774 +11 +6.40216 +21 +-4.32284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40216 +20 +-4.32284 +11 +6.39726 +21 +-4.31687 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39726 +20 +-4.31687 +11 +6.39363 +21 +-4.31007 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39363 +20 +-4.31007 +11 +6.39139 +21 +-4.30268 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39139 +20 +-4.30268 +11 +6.39063 +21 +-4.295 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39063 +20 +-4.295 +11 +6.39139 +21 +-4.28732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39139 +20 +-4.28732 +11 +6.39363 +21 +-4.27993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39363 +20 +-4.27993 +11 +6.39726 +21 +-4.27313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39726 +20 +-4.27313 +11 +6.40216 +21 +-4.26716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40216 +20 +-4.26716 +11 +6.40813 +21 +-4.26226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40813 +20 +-4.26226 +11 +6.41493 +21 +-4.25863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41493 +20 +-4.25863 +11 +6.42232 +21 +-4.25639 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42232 +20 +-4.25639 +11 +6.43 +21 +-4.25563 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43 +20 +-4.25563 +11 +6.43768 +21 +-4.25639 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22814 +20 +-4.4798 +11 +6.23133 +21 +-4.48194 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23133 +20 +-4.48194 +11 +6.23346 +21 +-4.48513 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23346 +20 +-4.48513 +11 +6.23421 +21 +-4.4889 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23421 +20 +-4.4889 +11 +6.23421 +21 +-4.64244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23421 +20 +-4.64244 +11 +6.23346 +21 +-4.64621 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23346 +20 +-4.64621 +11 +6.23133 +21 +-4.6494 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23133 +20 +-4.6494 +11 +6.22814 +21 +-4.65153 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22814 +20 +-4.65153 +11 +6.22437 +21 +-4.65228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22437 +20 +-4.65228 +11 +6.19287 +21 +-4.65228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19287 +20 +-4.65228 +11 +6.19287 +21 +-4.66581 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19287 +20 +-4.66581 +11 +6.21003 +21 +-4.68297 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21003 +20 +-4.68297 +11 +6.23679 +21 +-4.68297 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23679 +20 +-4.68297 +11 +6.24056 +21 +-4.68372 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24056 +20 +-4.68372 +11 +6.24375 +21 +-4.68586 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24375 +20 +-4.68586 +11 +6.24588 +21 +-4.68905 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24588 +20 +-4.68905 +11 +6.24654 +21 +-4.69233 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24654 +20 +-4.69233 +11 +6.29443 +21 +-4.64443 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29443 +20 +-4.64443 +11 +6.29555 +21 +-4.64373 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29555 +20 +-4.64373 +11 +6.29658 +21 +-4.64291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29658 +20 +-4.64291 +11 +6.29702 +21 +-4.64281 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29702 +20 +-4.64281 +11 +6.2974 +21 +-4.64257 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2974 +20 +-4.64257 +11 +6.29871 +21 +-4.64242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29871 +20 +-4.64242 +11 +6.3 +21 +-4.64213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3 +20 +-4.64213 +11 +6.33797 +21 +-4.64213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33797 +20 +-4.64213 +11 +6.33797 +21 +-4.63228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33797 +20 +-4.63228 +11 +6.33872 +21 +-4.62852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33872 +20 +-4.62852 +11 +6.34086 +21 +-4.62532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34086 +20 +-4.62532 +11 +6.34405 +21 +-4.62319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34405 +20 +-4.62319 +11 +6.34781 +21 +-4.62244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34781 +20 +-4.62244 +11 +6.36848 +21 +-4.62244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36848 +20 +-4.62244 +11 +6.37225 +21 +-4.62319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37225 +20 +-4.62319 +11 +6.37544 +21 +-4.62532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37544 +20 +-4.62532 +11 +6.37758 +21 +-4.62852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37758 +20 +-4.62852 +11 +6.37833 +21 +-4.63228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37833 +20 +-4.63228 +11 +6.37833 +21 +-4.66772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37833 +20 +-4.66772 +11 +6.37758 +21 +-4.67148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37758 +20 +-4.67148 +11 +6.37544 +21 +-4.67468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37544 +20 +-4.67468 +11 +6.37225 +21 +-4.67681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37225 +20 +-4.67681 +11 +6.36848 +21 +-4.67756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36848 +20 +-4.67756 +11 +6.34781 +21 +-4.67756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34781 +20 +-4.67756 +11 +6.34405 +21 +-4.67681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34405 +20 +-4.67681 +11 +6.34086 +21 +-4.67468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34086 +20 +-4.67468 +11 +6.33872 +21 +-4.67148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33872 +20 +-4.67148 +11 +6.33797 +21 +-4.66772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33797 +20 +-4.66772 +11 +6.33797 +21 +-4.65787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33797 +20 +-4.65787 +11 +6.30326 +21 +-4.65787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30326 +20 +-4.65787 +11 +6.25242 +21 +-4.70872 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25242 +20 +-4.70872 +11 +6.2513 +21 +-4.70942 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2513 +20 +-4.70942 +11 +6.25027 +21 +-4.71024 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25027 +20 +-4.71024 +11 +6.24983 +21 +-4.71034 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24983 +20 +-4.71034 +11 +6.24945 +21 +-4.71058 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24945 +20 +-4.71058 +11 +6.24814 +21 +-4.71073 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24814 +20 +-4.71073 +11 +6.24685 +21 +-4.71102 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24685 +20 +-4.71102 +11 +6.24663 +21 +-4.71102 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24663 +20 +-4.71102 +11 +6.24663 +21 +-4.71348 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24663 +20 +-4.71348 +11 +6.24588 +21 +-4.71725 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24588 +20 +-4.71725 +11 +6.24375 +21 +-4.72044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24375 +20 +-4.72044 +11 +6.24056 +21 +-4.72258 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24056 +20 +-4.72258 +11 +6.23679 +21 +-4.72333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23679 +20 +-4.72333 +11 +6.20136 +21 +-4.72333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20136 +20 +-4.72333 +11 +6.19759 +21 +-4.72258 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19759 +20 +-4.72258 +11 +6.1944 +21 +-4.72044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1944 +20 +-4.72044 +11 +6.19226 +21 +-4.71725 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19226 +20 +-4.71725 +11 +6.19152 +21 +-4.71348 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19152 +20 +-4.71348 +11 +6.19152 +21 +-4.69281 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19152 +20 +-4.69281 +11 +6.19226 +21 +-4.68905 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19226 +20 +-4.68905 +11 +6.1929 +21 +-4.68811 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1929 +20 +-4.68811 +11 +6.17943 +21 +-4.67464 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17943 +20 +-4.67464 +11 +6.17873 +21 +-4.67352 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17873 +20 +-4.67352 +11 +6.17791 +21 +-4.67249 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17791 +20 +-4.67249 +11 +6.17781 +21 +-4.67205 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17781 +20 +-4.67205 +11 +6.17757 +21 +-4.67168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17757 +20 +-4.67168 +11 +6.17742 +21 +-4.67036 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17742 +20 +-4.67036 +11 +6.17713 +21 +-4.66907 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17713 +20 +-4.66907 +11 +6.17713 +21 +-4.65228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17713 +20 +-4.65228 +11 +6.14563 +21 +-4.65228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14563 +20 +-4.65228 +11 +6.14186 +21 +-4.65153 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14186 +20 +-4.65153 +11 +6.13867 +21 +-4.6494 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13867 +20 +-4.6494 +11 +6.13654 +21 +-4.64621 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13654 +20 +-4.64621 +11 +6.13579 +21 +-4.64244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13579 +20 +-4.64244 +11 +6.13579 +21 +-4.4889 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13579 +20 +-4.4889 +11 +6.13654 +21 +-4.48513 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13654 +20 +-4.48513 +11 +6.13867 +21 +-4.48194 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13867 +20 +-4.48194 +11 +6.14186 +21 +-4.4798 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14186 +20 +-4.4798 +11 +6.14563 +21 +-4.47906 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14563 +20 +-4.47906 +11 +6.22437 +21 +-4.47906 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22437 +20 +-4.47906 +11 +6.22814 +21 +-4.4798 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66768 +20 +-4.22639 +11 +5.67507 +21 +-4.22863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67507 +20 +-4.22863 +11 +5.68187 +21 +-4.23226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68187 +20 +-4.23226 +11 +5.68784 +21 +-4.23716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68784 +20 +-4.23716 +11 +5.69274 +21 +-4.24313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.69274 +20 +-4.24313 +11 +5.69637 +21 +-4.24993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.69637 +20 +-4.24993 +11 +5.69861 +21 +-4.25732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.69861 +20 +-4.25732 +11 +5.69937 +21 +-4.265 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.69937 +20 +-4.265 +11 +5.69861 +21 +-4.27268 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.69861 +20 +-4.27268 +11 +5.69637 +21 +-4.28007 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.69637 +20 +-4.28007 +11 +5.69457 +21 +-4.28344 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.69457 +20 +-4.28344 +11 +5.75579 +21 +-4.34465 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75579 +20 +-4.34465 +11 +5.75579 +21 +-4.29256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75579 +20 +-4.29256 +11 +5.75654 +21 +-4.28879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75654 +20 +-4.28879 +11 +5.75867 +21 +-4.2856 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75867 +20 +-4.2856 +11 +5.76186 +21 +-4.28347 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76186 +20 +-4.28347 +11 +5.76563 +21 +-4.28272 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76563 +20 +-4.28272 +11 +5.84437 +21 +-4.28272 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84437 +20 +-4.28272 +11 +5.84814 +21 +-4.28347 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84814 +20 +-4.28347 +11 +5.85133 +21 +-4.2856 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85133 +20 +-4.2856 +11 +5.85346 +21 +-4.28879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85346 +20 +-4.28879 +11 +5.85421 +21 +-4.29256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85421 +20 +-4.29256 +11 +5.85421 +21 +-4.4461 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85421 +20 +-4.4461 +11 +5.85346 +21 +-4.44987 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85346 +20 +-4.44987 +11 +5.85133 +21 +-4.45306 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85133 +20 +-4.45306 +11 +5.84814 +21 +-4.4552 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84814 +20 +-4.4552 +11 +5.84437 +21 +-4.45594 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84437 +20 +-4.45594 +11 +5.76563 +21 +-4.45594 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76563 +20 +-4.45594 +11 +5.76186 +21 +-4.4552 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76186 +20 +-4.4552 +11 +5.75867 +21 +-4.45306 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75867 +20 +-4.45306 +11 +5.75654 +21 +-4.44987 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75654 +20 +-4.44987 +11 +5.75579 +21 +-4.4461 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75579 +20 +-4.4461 +11 +5.75579 +21 +-4.36692 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75579 +20 +-4.36692 +11 +5.68447 +21 +-4.2956 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68447 +20 +-4.2956 +11 +5.68187 +21 +-4.29774 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68187 +20 +-4.29774 +11 +5.67507 +21 +-4.30137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67507 +20 +-4.30137 +11 +5.66768 +21 +-4.30361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66768 +20 +-4.30361 +11 +5.66 +21 +-4.30437 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66 +20 +-4.30437 +11 +5.65232 +21 +-4.30361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65232 +20 +-4.30361 +11 +5.64493 +21 +-4.30137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64493 +20 +-4.30137 +11 +5.63813 +21 +-4.29774 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63813 +20 +-4.29774 +11 +5.63216 +21 +-4.29284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63216 +20 +-4.29284 +11 +5.62726 +21 +-4.28687 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62726 +20 +-4.28687 +11 +5.62363 +21 +-4.28007 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62363 +20 +-4.28007 +11 +5.62139 +21 +-4.27268 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62139 +20 +-4.27268 +11 +5.62063 +21 +-4.265 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62063 +20 +-4.265 +11 +5.62139 +21 +-4.25732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62139 +20 +-4.25732 +11 +5.62363 +21 +-4.24993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62363 +20 +-4.24993 +11 +5.62726 +21 +-4.24313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62726 +20 +-4.24313 +11 +5.63216 +21 +-4.23716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63216 +20 +-4.23716 +11 +5.63813 +21 +-4.23226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63813 +20 +-4.23226 +11 +5.64493 +21 +-4.22863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64493 +20 +-4.22863 +11 +5.65232 +21 +-4.22639 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65232 +20 +-4.22639 +11 +5.66 +21 +-4.22563 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66 +20 +-4.22563 +11 +5.66768 +21 +-4.22639 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97768 +20 +-4.17139 +11 +5.98507 +21 +-4.17363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98507 +20 +-4.17363 +11 +5.99187 +21 +-4.17726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99187 +20 +-4.17726 +11 +5.99784 +21 +-4.18216 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99784 +20 +-4.18216 +11 +6.00274 +21 +-4.18813 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00274 +20 +-4.18813 +11 +6.00637 +21 +-4.19493 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00637 +20 +-4.19493 +11 +6.00855 +21 +-4.20213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00855 +20 +-4.20213 +11 +6.12067 +21 +-4.20213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12067 +20 +-4.20213 +11 +6.12196 +21 +-4.20242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12196 +20 +-4.20242 +11 +6.12327 +21 +-4.20257 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12327 +20 +-4.20257 +11 +6.12365 +21 +-4.20281 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12365 +20 +-4.20281 +11 +6.12409 +21 +-4.20291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12409 +20 +-4.20291 +11 +6.12512 +21 +-4.20373 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12512 +20 +-4.20373 +11 +6.12624 +21 +-4.20443 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12624 +20 +-4.20443 +11 +6.13579 +21 +-4.21398 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13579 +20 +-4.21398 +11 +6.13579 +21 +-4.19756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13579 +20 +-4.19756 +11 +6.13654 +21 +-4.19379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13654 +20 +-4.19379 +11 +6.13867 +21 +-4.1906 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13867 +20 +-4.1906 +11 +6.14186 +21 +-4.18847 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14186 +20 +-4.18847 +11 +6.14563 +21 +-4.18772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14563 +20 +-4.18772 +11 +6.22437 +21 +-4.18772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22437 +20 +-4.18772 +11 +6.22814 +21 +-4.18847 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22814 +20 +-4.18847 +11 +6.23133 +21 +-4.1906 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23133 +20 +-4.1906 +11 +6.23346 +21 +-4.19379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23346 +20 +-4.19379 +11 +6.23421 +21 +-4.19756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23421 +20 +-4.19756 +11 +6.23421 +21 +-4.3511 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23421 +20 +-4.3511 +11 +6.23346 +21 +-4.35487 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23346 +20 +-4.35487 +11 +6.23133 +21 +-4.35806 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23133 +20 +-4.35806 +11 +6.22814 +21 +-4.3602 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22814 +20 +-4.3602 +11 +6.22437 +21 +-4.36094 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22437 +20 +-4.36094 +11 +6.14563 +21 +-4.36094 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14563 +20 +-4.36094 +11 +6.14186 +21 +-4.3602 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14186 +20 +-4.3602 +11 +6.13867 +21 +-4.35806 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13867 +20 +-4.35806 +11 +6.13654 +21 +-4.35487 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13654 +20 +-4.35487 +11 +6.13579 +21 +-4.3511 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13579 +20 +-4.3511 +11 +6.13579 +21 +-4.23625 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13579 +20 +-4.23625 +11 +6.11741 +21 +-4.21787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11741 +20 +-4.21787 +11 +6.00855 +21 +-4.21787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00855 +20 +-4.21787 +11 +6.00637 +21 +-4.22507 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00637 +20 +-4.22507 +11 +6.00274 +21 +-4.23187 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00274 +20 +-4.23187 +11 +5.99784 +21 +-4.23784 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99784 +20 +-4.23784 +11 +5.99187 +21 +-4.24274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99187 +20 +-4.24274 +11 +5.98507 +21 +-4.24637 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98507 +20 +-4.24637 +11 +5.97768 +21 +-4.24861 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97768 +20 +-4.24861 +11 +5.97 +21 +-4.24937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97 +20 +-4.24937 +11 +5.96232 +21 +-4.24861 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96232 +20 +-4.24861 +11 +5.95493 +21 +-4.24637 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95493 +20 +-4.24637 +11 +5.94813 +21 +-4.24274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94813 +20 +-4.24274 +11 +5.94216 +21 +-4.23784 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94216 +20 +-4.23784 +11 +5.93726 +21 +-4.23187 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93726 +20 +-4.23187 +11 +5.93363 +21 +-4.22507 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93363 +20 +-4.22507 +11 +5.93139 +21 +-4.21768 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93139 +20 +-4.21768 +11 +5.93063 +21 +-4.21 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93063 +20 +-4.21 +11 +5.93139 +21 +-4.20232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93139 +20 +-4.20232 +11 +5.93363 +21 +-4.19493 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93363 +20 +-4.19493 +11 +5.93726 +21 +-4.18813 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93726 +20 +-4.18813 +11 +5.94216 +21 +-4.18216 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94216 +20 +-4.18216 +11 +5.94813 +21 +-4.17726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94813 +20 +-4.17726 +11 +5.95493 +21 +-4.17363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95493 +20 +-4.17363 +11 +5.96232 +21 +-4.17139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96232 +20 +-4.17139 +11 +5.97 +21 +-4.17063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97 +20 +-4.17063 +11 +5.97768 +21 +-4.17139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05768 +20 +-3.02139 +11 +6.06507 +21 +-3.02363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06507 +20 +-3.02363 +11 +6.07187 +21 +-3.02726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07187 +20 +-3.02726 +11 +6.07784 +21 +-3.03216 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07784 +20 +-3.03216 +11 +6.08274 +21 +-3.03813 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08274 +20 +-3.03813 +11 +6.08637 +21 +-3.04493 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08637 +20 +-3.04493 +11 +6.08861 +21 +-3.05232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08861 +20 +-3.05232 +11 +6.08937 +21 +-3.06 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08937 +20 +-3.06 +11 +6.08861 +21 +-3.06768 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08861 +20 +-3.06768 +11 +6.08637 +21 +-3.07507 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08637 +20 +-3.07507 +11 +6.08274 +21 +-3.08187 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08274 +20 +-3.08187 +11 +6.07784 +21 +-3.08784 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07784 +20 +-3.08784 +11 +6.07187 +21 +-3.09274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07187 +20 +-3.09274 +11 +6.06507 +21 +-3.09637 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06507 +20 +-3.09637 +11 +6.05768 +21 +-3.09861 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05768 +20 +-3.09861 +11 +6.05695 +21 +-3.09869 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05695 +20 +-3.09869 +11 +6.05695 +21 +-3.12819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05695 +20 +-3.12819 +11 +6.05941 +21 +-3.12819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05941 +20 +-3.12819 +11 +6.06318 +21 +-3.12894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06318 +20 +-3.12894 +11 +6.06637 +21 +-3.13107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06637 +20 +-3.13107 +11 +6.0685 +21 +-3.13426 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0685 +20 +-3.13426 +11 +6.06925 +21 +-3.13803 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06925 +20 +-3.13803 +11 +6.06925 +21 +-3.16479 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06925 +20 +-3.16479 +11 +6.12234 +21 +-3.21787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12234 +20 +-3.21787 +11 +6.17518 +21 +-3.21787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17518 +20 +-3.21787 +11 +6.17518 +21 +-3.21591 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17518 +20 +-3.21591 +11 +6.17593 +21 +-3.21214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17593 +20 +-3.21214 +11 +6.17806 +21 +-3.20895 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17806 +20 +-3.20895 +11 +6.18125 +21 +-3.20681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18125 +20 +-3.20681 +11 +6.18502 +21 +-3.20606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18502 +20 +-3.20606 +11 +6.2047 +21 +-3.20606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2047 +20 +-3.20606 +11 +6.20847 +21 +-3.20681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20847 +20 +-3.20681 +11 +6.21166 +21 +-3.20895 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21166 +20 +-3.20895 +11 +6.2138 +21 +-3.21214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2138 +20 +-3.21214 +11 +6.21455 +21 +-3.21591 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21455 +20 +-3.21591 +11 +6.21455 +21 +-3.23559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21455 +20 +-3.23559 +11 +6.2138 +21 +-3.23936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2138 +20 +-3.23936 +11 +6.21166 +21 +-3.24255 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21166 +20 +-3.24255 +11 +6.20847 +21 +-3.24468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20847 +20 +-3.24468 +11 +6.2047 +21 +-3.24543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2047 +20 +-3.24543 +11 +6.20274 +21 +-3.24543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20274 +20 +-3.24543 +11 +6.20274 +21 +-3.31735 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20274 +20 +-3.31735 +11 +6.30251 +21 +-3.41713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30251 +20 +-3.41713 +11 +6.33154 +21 +-3.41713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33154 +20 +-3.41713 +11 +6.33154 +21 +-3.37661 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33154 +20 +-3.37661 +11 +6.33228 +21 +-3.37285 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33228 +20 +-3.37285 +11 +6.33442 +21 +-3.36965 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33442 +20 +-3.36965 +11 +6.33761 +21 +-3.36752 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33761 +20 +-3.36752 +11 +6.34138 +21 +-3.36677 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34138 +20 +-3.36677 +11 +6.38862 +21 +-3.36677 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38862 +20 +-3.36677 +11 +6.39239 +21 +-3.36752 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39239 +20 +-3.36752 +11 +6.39558 +21 +-3.36965 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39558 +20 +-3.36965 +11 +6.39772 +21 +-3.37285 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39772 +20 +-3.37285 +11 +6.39846 +21 +-3.37661 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39846 +20 +-3.37661 +11 +6.39846 +21 +-3.4242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39846 +20 +-3.4242 +11 +6.39933 +21 +-3.4243 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39933 +20 +-3.4243 +11 +6.39971 +21 +-3.42454 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39971 +20 +-3.42454 +11 +6.40015 +21 +-3.42464 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40015 +20 +-3.42464 +11 +6.40118 +21 +-3.42546 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40118 +20 +-3.42546 +11 +6.4023 +21 +-3.42616 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4023 +20 +-3.42616 +11 +6.45405 +21 +-3.47791 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45405 +20 +-3.47791 +11 +6.4787 +21 +-3.47791 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4787 +20 +-3.47791 +11 +6.48247 +21 +-3.47866 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48247 +20 +-3.47866 +11 +6.48566 +21 +-3.4808 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48566 +20 +-3.4808 +11 +6.48779 +21 +-3.48399 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48779 +20 +-3.48399 +11 +6.48854 +21 +-3.48776 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48854 +20 +-3.48776 +11 +6.48854 +21 +-3.50744 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48854 +20 +-3.50744 +11 +6.48779 +21 +-3.51121 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48779 +20 +-3.51121 +11 +6.48566 +21 +-3.5144 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48566 +20 +-3.5144 +11 +6.48247 +21 +-3.51653 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48247 +20 +-3.51653 +11 +6.4787 +21 +-3.51728 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4787 +20 +-3.51728 +11 +6.4413 +21 +-3.51728 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4413 +20 +-3.51728 +11 +6.43753 +21 +-3.51653 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43753 +20 +-3.51653 +11 +6.43434 +21 +-3.5144 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43434 +20 +-3.5144 +11 +6.43221 +21 +-3.51121 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43221 +20 +-3.51121 +11 +6.43146 +21 +-3.50744 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43146 +20 +-3.50744 +11 +6.43146 +21 +-3.50655 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43146 +20 +-3.50655 +11 +6.39244 +21 +-3.54557 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39244 +20 +-3.54557 +11 +6.39132 +21 +-3.54627 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39132 +20 +-3.54627 +11 +6.39029 +21 +-3.54709 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39029 +20 +-3.54709 +11 +6.38985 +21 +-3.54719 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38985 +20 +-3.54719 +11 +6.38948 +21 +-3.54743 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38948 +20 +-3.54743 +11 +6.38816 +21 +-3.54758 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38816 +20 +-3.54758 +11 +6.38688 +21 +-3.54787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38688 +20 +-3.54787 +11 +6.29326 +21 +-3.54787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29326 +20 +-3.54787 +11 +6.28287 +21 +-3.55826 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28287 +20 +-3.55826 +11 +6.28287 +21 +-3.79174 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28287 +20 +-3.79174 +11 +6.42964 +21 +-3.93851 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42964 +20 +-3.93851 +11 +6.43035 +21 +-3.93963 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43035 +20 +-3.93963 +11 +6.43117 +21 +-3.94066 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43117 +20 +-3.94066 +11 +6.43127 +21 +-3.94109 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43127 +20 +-3.94109 +11 +6.43151 +21 +-3.94147 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43151 +20 +-3.94147 +11 +6.43165 +21 +-3.94279 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43165 +20 +-3.94279 +11 +6.43195 +21 +-3.94407 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43195 +20 +-3.94407 +11 +6.43195 +21 +-3.95079 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43195 +20 +-3.95079 +11 +6.50085 +21 +-3.95079 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50085 +20 +-3.95079 +11 +6.50461 +21 +-3.95154 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50461 +20 +-3.95154 +11 +6.50781 +21 +-3.95367 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50781 +20 +-3.95367 +11 +6.50994 +21 +-3.95686 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50994 +20 +-3.95686 +11 +6.51069 +21 +-3.96063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51069 +20 +-3.96063 +11 +6.51069 +21 +-4.03937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51069 +20 +-4.03937 +11 +6.50994 +21 +-4.04314 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50994 +20 +-4.04314 +11 +6.50781 +21 +-4.04633 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50781 +20 +-4.04633 +11 +6.50461 +21 +-4.04846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50461 +20 +-4.04846 +11 +6.50085 +21 +-4.04921 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50085 +20 +-4.04921 +11 +6.43787 +21 +-4.04921 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43787 +20 +-4.04921 +11 +6.43787 +21 +-4.05645 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43787 +20 +-4.05645 +11 +6.44507 +21 +-4.05863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44507 +20 +-4.05863 +11 +6.45187 +21 +-4.06226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45187 +20 +-4.06226 +11 +6.45784 +21 +-4.06716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45784 +20 +-4.06716 +11 +6.46274 +21 +-4.07313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46274 +20 +-4.07313 +11 +6.46637 +21 +-4.07993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46637 +20 +-4.07993 +11 +6.46861 +21 +-4.08732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46861 +20 +-4.08732 +11 +6.46937 +21 +-4.095 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46937 +20 +-4.095 +11 +6.46861 +21 +-4.10268 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46861 +20 +-4.10268 +11 +6.46637 +21 +-4.11007 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46637 +20 +-4.11007 +11 +6.46274 +21 +-4.11687 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46274 +20 +-4.11687 +11 +6.45784 +21 +-4.12284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45784 +20 +-4.12284 +11 +6.45187 +21 +-4.12774 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45187 +20 +-4.12774 +11 +6.44507 +21 +-4.13137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44507 +20 +-4.13137 +11 +6.43768 +21 +-4.13361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43768 +20 +-4.13361 +11 +6.43 +21 +-4.13437 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43 +20 +-4.13437 +11 +6.42232 +21 +-4.13361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42232 +20 +-4.13361 +11 +6.41493 +21 +-4.13137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41493 +20 +-4.13137 +11 +6.40813 +21 +-4.12774 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40813 +20 +-4.12774 +11 +6.40216 +21 +-4.12284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40216 +20 +-4.12284 +11 +6.39726 +21 +-4.11687 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39726 +20 +-4.11687 +11 +6.39363 +21 +-4.11007 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39363 +20 +-4.11007 +11 +6.39139 +21 +-4.10268 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39139 +20 +-4.10268 +11 +6.39063 +21 +-4.095 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39063 +20 +-4.095 +11 +6.39139 +21 +-4.08732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39139 +20 +-4.08732 +11 +6.39363 +21 +-4.07993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39363 +20 +-4.07993 +11 +6.39726 +21 +-4.07313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39726 +20 +-4.07313 +11 +6.40216 +21 +-4.06716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40216 +20 +-4.06716 +11 +6.40813 +21 +-4.06226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40813 +20 +-4.06226 +11 +6.41493 +21 +-4.05863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41493 +20 +-4.05863 +11 +6.42213 +21 +-4.05645 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42213 +20 +-4.05645 +11 +6.42213 +21 +-4.04921 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42213 +20 +-4.04921 +11 +6.3473 +21 +-4.04921 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3473 +20 +-4.04921 +11 +6.34354 +21 +-4.04846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34354 +20 +-4.04846 +11 +6.34034 +21 +-4.04633 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34034 +20 +-4.04633 +11 +6.33821 +21 +-4.04314 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33821 +20 +-4.04314 +11 +6.33746 +21 +-4.03937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33746 +20 +-4.03937 +11 +6.33746 +21 +-3.96063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33746 +20 +-3.96063 +11 +6.33821 +21 +-3.95686 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33821 +20 +-3.95686 +11 +6.34034 +21 +-3.95367 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34034 +20 +-3.95367 +11 +6.34354 +21 +-3.95154 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34354 +20 +-3.95154 +11 +6.3473 +21 +-3.95079 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3473 +20 +-3.95079 +11 +6.4162 +21 +-3.95079 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4162 +20 +-3.95079 +11 +6.4162 +21 +-3.94734 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4162 +20 +-3.94734 +11 +6.26943 +21 +-3.80057 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26943 +20 +-3.80057 +11 +6.26873 +21 +-3.79945 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26873 +20 +-3.79945 +11 +6.26791 +21 +-3.79842 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26791 +20 +-3.79842 +11 +6.26781 +21 +-3.79798 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26781 +20 +-3.79798 +11 +6.26757 +21 +-3.7976 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26757 +20 +-3.7976 +11 +6.26742 +21 +-3.79629 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26742 +20 +-3.79629 +11 +6.26713 +21 +-3.795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26713 +20 +-3.795 +11 +6.26713 +21 +-3.555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26713 +20 +-3.555 +11 +6.26742 +21 +-3.55371 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26742 +20 +-3.55371 +11 +6.26757 +21 +-3.5524 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26757 +20 +-3.5524 +11 +6.26781 +21 +-3.55202 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26781 +20 +-3.55202 +11 +6.26791 +21 +-3.55158 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26791 +20 +-3.55158 +11 +6.26873 +21 +-3.55055 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26873 +20 +-3.55055 +11 +6.26943 +21 +-3.54943 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26943 +20 +-3.54943 +11 +6.28443 +21 +-3.53443 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28443 +20 +-3.53443 +11 +6.28555 +21 +-3.53373 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28555 +20 +-3.53373 +11 +6.28658 +21 +-3.53291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28658 +20 +-3.53291 +11 +6.28702 +21 +-3.53281 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28702 +20 +-3.53281 +11 +6.2874 +21 +-3.53257 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2874 +20 +-3.53257 +11 +6.28871 +21 +-3.53242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28871 +20 +-3.53242 +11 +6.29 +21 +-3.53213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29 +20 +-3.53213 +11 +6.38361 +21 +-3.53213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38361 +20 +-3.53213 +11 +6.42371 +21 +-3.49203 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42371 +20 +-3.49203 +11 +6.42483 +21 +-3.49133 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42483 +20 +-3.49133 +11 +6.42586 +21 +-3.4905 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42586 +20 +-3.4905 +11 +6.4263 +21 +-3.4904 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4263 +20 +-3.4904 +11 +6.42668 +21 +-3.49017 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42668 +20 +-3.49017 +11 +6.42799 +21 +-3.49002 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42799 +20 +-3.49002 +11 +6.42928 +21 +-3.48972 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42928 +20 +-3.48972 +11 +6.43146 +21 +-3.48972 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43146 +20 +-3.48972 +11 +6.43146 +21 +-3.48776 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43146 +20 +-3.48776 +11 +6.43221 +21 +-3.48399 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43221 +20 +-3.48399 +11 +6.43434 +21 +-3.4808 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43434 +20 +-3.4808 +11 +6.43453 +21 +-3.48067 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43453 +20 +-3.48067 +11 +6.39846 +21 +-3.4446 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39846 +20 +-3.4446 +11 +6.39846 +21 +-3.48685 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39846 +20 +-3.48685 +11 +6.39772 +21 +-3.49062 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39772 +20 +-3.49062 +11 +6.39558 +21 +-3.49381 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39558 +20 +-3.49381 +11 +6.39239 +21 +-3.49594 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39239 +20 +-3.49594 +11 +6.38862 +21 +-3.49669 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38862 +20 +-3.49669 +11 +6.34138 +21 +-3.49669 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34138 +20 +-3.49669 +11 +6.33761 +21 +-3.49594 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33761 +20 +-3.49594 +11 +6.33442 +21 +-3.49381 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33442 +20 +-3.49381 +11 +6.33228 +21 +-3.49062 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33228 +20 +-3.49062 +11 +6.33154 +21 +-3.48685 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33154 +20 +-3.48685 +11 +6.33154 +21 +-3.43287 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33154 +20 +-3.43287 +11 +6.29925 +21 +-3.43287 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29925 +20 +-3.43287 +11 +6.29796 +21 +-3.43258 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29796 +20 +-3.43258 +11 +6.29665 +21 +-3.43243 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29665 +20 +-3.43243 +11 +6.29627 +21 +-3.43219 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29627 +20 +-3.43219 +11 +6.29584 +21 +-3.43209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29584 +20 +-3.43209 +11 +6.2948 +21 +-3.43127 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2948 +20 +-3.43127 +11 +6.29368 +21 +-3.43057 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29368 +20 +-3.43057 +11 +6.18929 +21 +-3.32618 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18929 +20 +-3.32618 +11 +6.18859 +21 +-3.32506 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18859 +20 +-3.32506 +11 +6.18777 +21 +-3.32403 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18777 +20 +-3.32403 +11 +6.18767 +21 +-3.32359 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18767 +20 +-3.32359 +11 +6.18743 +21 +-3.32321 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18743 +20 +-3.32321 +11 +6.18728 +21 +-3.3219 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18728 +20 +-3.3219 +11 +6.18699 +21 +-3.32061 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18699 +20 +-3.32061 +11 +6.18699 +21 +-3.24543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18699 +20 +-3.24543 +11 +6.18502 +21 +-3.24543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18502 +20 +-3.24543 +11 +6.18125 +21 +-3.24468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18125 +20 +-3.24468 +11 +6.17806 +21 +-3.24255 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17806 +20 +-3.24255 +11 +6.17593 +21 +-3.23936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17593 +20 +-3.23936 +11 +6.17518 +21 +-3.23559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17518 +20 +-3.23559 +11 +6.17518 +21 +-3.23362 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17518 +20 +-3.23362 +11 +6.11907 +21 +-3.23362 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11907 +20 +-3.23362 +11 +6.11779 +21 +-3.23333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11779 +20 +-3.23333 +11 +6.11647 +21 +-3.23318 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11647 +20 +-3.23318 +11 +6.11609 +21 +-3.23294 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11609 +20 +-3.23294 +11 +6.11566 +21 +-3.23284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11566 +20 +-3.23284 +11 +6.11463 +21 +-3.23202 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11463 +20 +-3.23202 +11 +6.11351 +21 +-3.23132 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11351 +20 +-3.23132 +11 +6.06412 +21 +-3.18193 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06412 +20 +-3.18193 +11 +6.06318 +21 +-3.18256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06318 +20 +-3.18256 +11 +6.05941 +21 +-3.18331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05941 +20 +-3.18331 +11 +6.03874 +21 +-3.18331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03874 +20 +-3.18331 +11 +6.03497 +21 +-3.18256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03497 +20 +-3.18256 +11 +6.03178 +21 +-3.18042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03178 +20 +-3.18042 +11 +6.02965 +21 +-3.17723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02965 +20 +-3.17723 +11 +6.0289 +21 +-3.17346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0289 +20 +-3.17346 +11 +6.0289 +21 +-3.13803 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0289 +20 +-3.13803 +11 +6.02965 +21 +-3.13426 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02965 +20 +-3.13426 +11 +6.03178 +21 +-3.13107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03178 +20 +-3.13107 +11 +6.03497 +21 +-3.12894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03497 +20 +-3.12894 +11 +6.03874 +21 +-3.12819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03874 +20 +-3.12819 +11 +6.0412 +21 +-3.12819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0412 +20 +-3.12819 +11 +6.0412 +21 +-3.09827 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0412 +20 +-3.09827 +11 +6.03493 +21 +-3.09637 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03493 +20 +-3.09637 +11 +6.02813 +21 +-3.09274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02813 +20 +-3.09274 +11 +6.02216 +21 +-3.08784 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02216 +20 +-3.08784 +11 +6.01726 +21 +-3.08187 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01726 +20 +-3.08187 +11 +6.01363 +21 +-3.07507 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01363 +20 +-3.07507 +11 +6.01139 +21 +-3.06768 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01139 +20 +-3.06768 +11 +6.01063 +21 +-3.06 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01063 +20 +-3.06 +11 +6.01139 +21 +-3.05232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01139 +20 +-3.05232 +11 +6.01363 +21 +-3.04493 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01363 +20 +-3.04493 +11 +6.01726 +21 +-3.03813 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01726 +20 +-3.03813 +11 +6.02216 +21 +-3.03216 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02216 +20 +-3.03216 +11 +6.02813 +21 +-3.02726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02813 +20 +-3.02726 +11 +6.03493 +21 +-3.02363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03493 +20 +-3.02363 +11 +6.04232 +21 +-3.02139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04232 +20 +-3.02139 +11 +6.05 +21 +-3.02063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05 +20 +-3.02063 +11 +6.05768 +21 +-3.02139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96224 +20 +-2.60025 +11 +5.96416 +21 +-2.60153 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96416 +20 +-2.60153 +11 +5.96544 +21 +-2.60345 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96544 +20 +-2.60345 +11 +5.96589 +21 +-2.60571 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96589 +20 +-2.60571 +11 +5.96589 +21 +-2.66475 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96589 +20 +-2.66475 +11 +5.99057 +21 +-2.68943 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99057 +20 +-2.68943 +11 +5.99127 +21 +-2.69055 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99127 +20 +-2.69055 +11 +5.99209 +21 +-2.69158 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99209 +20 +-2.69158 +11 +5.99219 +21 +-2.69202 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99219 +20 +-2.69202 +11 +5.99243 +21 +-2.6924 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99243 +20 +-2.6924 +11 +5.99258 +21 +-2.69371 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99258 +20 +-2.69371 +11 +5.99287 +21 +-2.695 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99287 +20 +-2.695 +11 +5.99287 +21 +-2.98075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99287 +20 +-2.98075 +11 +5.99258 +21 +-2.98204 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99258 +20 +-2.98204 +11 +5.99243 +21 +-2.98335 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99243 +20 +-2.98335 +11 +5.99219 +21 +-2.98373 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99219 +20 +-2.98373 +11 +5.99209 +21 +-2.98416 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99209 +20 +-2.98416 +11 +5.99127 +21 +-2.9852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99127 +20 +-2.9852 +11 +5.99057 +21 +-2.98632 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99057 +20 +-2.98632 +11 +5.98018 +21 +-2.99671 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98018 +20 +-2.99671 +11 +5.98018 +21 +-3.01479 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98018 +20 +-3.01479 +11 +5.98279 +21 +-3.0174 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98279 +20 +-3.0174 +11 +5.98349 +21 +-3.01852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98349 +20 +-3.01852 +11 +5.98432 +21 +-3.01956 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98432 +20 +-3.01956 +11 +5.98442 +21 +-3.01999 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98442 +20 +-3.01999 +11 +5.98466 +21 +-3.02037 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98466 +20 +-3.02037 +11 +5.9848 +21 +-3.02168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9848 +20 +-3.02168 +11 +5.9851 +21 +-3.02297 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9851 +20 +-3.02297 +11 +5.9851 +21 +-3.12819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9851 +20 +-3.12819 +11 +5.98756 +21 +-3.12819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98756 +20 +-3.12819 +11 +5.99133 +21 +-3.12894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99133 +20 +-3.12894 +11 +5.99452 +21 +-3.13107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99452 +20 +-3.13107 +11 +5.99665 +21 +-3.13426 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99665 +20 +-3.13426 +11 +5.9974 +21 +-3.13803 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9974 +20 +-3.13803 +11 +5.9974 +21 +-3.16587 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9974 +20 +-3.16587 +11 +5.99743 +21 +-3.16592 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99743 +20 +-3.16592 +11 +5.99758 +21 +-3.16724 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99758 +20 +-3.16724 +11 +5.99787 +21 +-3.16852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99787 +20 +-3.16852 +11 +5.99787 +21 +-3.74 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99787 +20 +-3.74 +11 +5.99758 +21 +-3.74129 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99758 +20 +-3.74129 +11 +5.99743 +21 +-3.7426 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99743 +20 +-3.7426 +11 +5.99719 +21 +-3.74298 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99719 +20 +-3.74298 +11 +5.99709 +21 +-3.74342 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99709 +20 +-3.74342 +11 +5.99627 +21 +-3.74445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99627 +20 +-3.74445 +11 +5.99557 +21 +-3.74557 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99557 +20 +-3.74557 +11 +5.93624 +21 +-3.8049 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93624 +20 +-3.8049 +11 +5.93512 +21 +-3.8056 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93512 +20 +-3.8056 +11 +5.93409 +21 +-3.80642 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93409 +20 +-3.80642 +11 +5.93365 +21 +-3.80652 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93365 +20 +-3.80652 +11 +5.93327 +21 +-3.80676 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93327 +20 +-3.80676 +11 +5.93196 +21 +-3.80691 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93196 +20 +-3.80691 +11 +5.93067 +21 +-3.8072 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93067 +20 +-3.8072 +11 +5.85421 +21 +-3.8072 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85421 +20 +-3.8072 +11 +5.85421 +21 +-3.8761 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85421 +20 +-3.8761 +11 +5.85346 +21 +-3.87987 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85346 +20 +-3.87987 +11 +5.85133 +21 +-3.88306 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85133 +20 +-3.88306 +11 +5.84814 +21 +-3.8852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84814 +20 +-3.8852 +11 +5.84437 +21 +-3.88594 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84437 +20 +-3.88594 +11 +5.76563 +21 +-3.88594 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76563 +20 +-3.88594 +11 +5.76186 +21 +-3.8852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76186 +20 +-3.8852 +11 +5.75867 +21 +-3.88306 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75867 +20 +-3.88306 +11 +5.75654 +21 +-3.87987 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75654 +20 +-3.87987 +11 +5.75579 +21 +-3.8761 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75579 +20 +-3.8761 +11 +5.75579 +21 +-3.72256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75579 +20 +-3.72256 +11 +5.75654 +21 +-3.71879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75654 +20 +-3.71879 +11 +5.75867 +21 +-3.7156 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75867 +20 +-3.7156 +11 +5.76186 +21 +-3.71347 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76186 +20 +-3.71347 +11 +5.76563 +21 +-3.71272 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76563 +20 +-3.71272 +11 +5.84437 +21 +-3.71272 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84437 +20 +-3.71272 +11 +5.84814 +21 +-3.71347 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84814 +20 +-3.71347 +11 +5.85133 +21 +-3.7156 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85133 +20 +-3.7156 +11 +5.85346 +21 +-3.71879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85346 +20 +-3.71879 +11 +5.85421 +21 +-3.72256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85421 +20 +-3.72256 +11 +5.85421 +21 +-3.79146 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85421 +20 +-3.79146 +11 +5.92741 +21 +-3.79146 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92741 +20 +-3.79146 +11 +5.98213 +21 +-3.73674 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98213 +20 +-3.73674 +11 +5.98213 +21 +-3.18331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98213 +20 +-3.18331 +11 +5.96689 +21 +-3.18331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96689 +20 +-3.18331 +11 +5.96312 +21 +-3.18256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96312 +20 +-3.18256 +11 +5.95993 +21 +-3.18042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95993 +20 +-3.18042 +11 +5.9578 +21 +-3.17723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9578 +20 +-3.17723 +11 +5.95705 +21 +-3.17346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95705 +20 +-3.17346 +11 +5.95705 +21 +-3.16362 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95705 +20 +-3.16362 +11 +5.92483 +21 +-3.16362 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92483 +20 +-3.16362 +11 +5.92381 +21 +-3.16515 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92381 +20 +-3.16515 +11 +5.92062 +21 +-3.16728 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92062 +20 +-3.16728 +11 +5.91685 +21 +-3.16803 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91685 +20 +-3.16803 +11 +5.87945 +21 +-3.16803 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87945 +20 +-3.16803 +11 +5.87568 +21 +-3.16728 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87568 +20 +-3.16728 +11 +5.87249 +21 +-3.16515 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87249 +20 +-3.16515 +11 +5.87036 +21 +-3.16196 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87036 +20 +-3.16196 +11 +5.86961 +21 +-3.15819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86961 +20 +-3.15819 +11 +5.86961 +21 +-3.1385 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86961 +20 +-3.1385 +11 +5.87036 +21 +-3.13474 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87036 +20 +-3.13474 +11 +5.87249 +21 +-3.13154 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87249 +20 +-3.13154 +11 +5.87568 +21 +-3.12941 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87568 +20 +-3.12941 +11 +5.87945 +21 +-3.12866 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87945 +20 +-3.12866 +11 +5.91685 +21 +-3.12866 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91685 +20 +-3.12866 +11 +5.92062 +21 +-3.12941 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92062 +20 +-3.12941 +11 +5.92381 +21 +-3.13154 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92381 +20 +-3.13154 +11 +5.92594 +21 +-3.13474 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92594 +20 +-3.13474 +11 +5.92669 +21 +-3.1385 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92669 +20 +-3.1385 +11 +5.92669 +21 +-3.14787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92669 +20 +-3.14787 +11 +5.95705 +21 +-3.14787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95705 +20 +-3.14787 +11 +5.95705 +21 +-3.13803 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95705 +20 +-3.13803 +11 +5.9578 +21 +-3.13426 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9578 +20 +-3.13426 +11 +5.95993 +21 +-3.13107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95993 +20 +-3.13107 +11 +5.96312 +21 +-3.12894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96312 +20 +-3.12894 +11 +5.96689 +21 +-3.12819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96689 +20 +-3.12819 +11 +5.96935 +21 +-3.12819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96935 +20 +-3.12819 +11 +5.96935 +21 +-3.03331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96935 +20 +-3.03331 +11 +5.94967 +21 +-3.03331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94967 +20 +-3.03331 +11 +5.9459 +21 +-3.03256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9459 +20 +-3.03256 +11 +5.94271 +21 +-3.03042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94271 +20 +-3.03042 +11 +5.94057 +21 +-3.02723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94057 +20 +-3.02723 +11 +5.93982 +21 +-3.02346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93982 +20 +-3.02346 +11 +5.93982 +21 +-2.98803 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93982 +20 +-2.98803 +11 +5.94057 +21 +-2.98426 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94057 +20 +-2.98426 +11 +5.94271 +21 +-2.98107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94271 +20 +-2.98107 +11 +5.9459 +21 +-2.97894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9459 +20 +-2.97894 +11 +5.94967 +21 +-2.97819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94967 +20 +-2.97819 +11 +5.97033 +21 +-2.97819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97033 +20 +-2.97819 +11 +5.9741 +21 +-2.97894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9741 +20 +-2.97894 +11 +5.97504 +21 +-2.97957 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97504 +20 +-2.97957 +11 +5.97713 +21 +-2.97749 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97713 +20 +-2.97749 +11 +5.97713 +21 +-2.69826 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97713 +20 +-2.69826 +11 +5.95544 +21 +-2.67657 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95544 +20 +-2.67657 +11 +5.94817 +21 +-2.67657 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94817 +20 +-2.67657 +11 +5.94591 +21 +-2.67613 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94591 +20 +-2.67613 +11 +5.94399 +21 +-2.67485 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94399 +20 +-2.67485 +11 +5.94271 +21 +-2.67293 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94271 +20 +-2.67293 +11 +5.94226 +21 +-2.67067 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94226 +20 +-2.67067 +11 +5.94226 +21 +-2.60571 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94226 +20 +-2.60571 +11 +5.94271 +21 +-2.60345 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94271 +20 +-2.60345 +11 +5.94399 +21 +-2.60153 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94399 +20 +-2.60153 +11 +5.94591 +21 +-2.60025 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94591 +20 +-2.60025 +11 +5.94817 +21 +-2.5998 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94817 +20 +-2.5998 +11 +5.95998 +21 +-2.5998 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95998 +20 +-2.5998 +11 +5.96224 +21 +-2.60025 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.58702 +20 +-2.18108 +11 +5.59227 +21 +-2.18304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59227 +20 +-2.18304 +11 +5.59675 +21 +-2.1864 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59675 +20 +-2.1864 +11 +5.60011 +21 +-2.19088 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60011 +20 +-2.19088 +11 +5.60207 +21 +-2.19613 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60207 +20 +-2.19613 +11 +5.60252 +21 +-2.20031 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60252 +20 +-2.20031 +11 +5.60252 +21 +-2.23969 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60252 +20 +-2.23969 +11 +5.60207 +21 +-2.24387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60207 +20 +-2.24387 +11 +5.60011 +21 +-2.24912 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60011 +20 +-2.24912 +11 +5.59675 +21 +-2.2536 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59675 +20 +-2.2536 +11 +5.59227 +21 +-2.25696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59227 +20 +-2.25696 +11 +5.58702 +21 +-2.25892 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.58702 +20 +-2.25892 +11 +5.58283 +21 +-2.25937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.58283 +20 +-2.25937 +11 +5.57102 +21 +-2.25937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57102 +20 +-2.25937 +11 +5.57102 +21 +-2.55489 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57102 +20 +-2.55489 +11 +5.63234 +21 +-2.6162 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63234 +20 +-2.6162 +11 +5.66244 +21 +-2.6162 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66244 +20 +-2.6162 +11 +5.66244 +21 +-2.61374 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66244 +20 +-2.61374 +11 +5.66319 +21 +-2.60997 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66319 +20 +-2.60997 +11 +5.66532 +21 +-2.60678 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66532 +20 +-2.60678 +11 +5.66852 +21 +-2.60465 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66852 +20 +-2.60465 +11 +5.67228 +21 +-2.6039 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67228 +20 +-2.6039 +11 +5.70421 +21 +-2.6039 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70421 +20 +-2.6039 +11 +5.70421 +21 +-2.52709 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70421 +20 +-2.52709 +11 +5.69339 +21 +-2.52709 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.69339 +20 +-2.52709 +11 +5.68962 +21 +-2.52634 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68962 +20 +-2.52634 +11 +5.68643 +21 +-2.5242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68643 +20 +-2.5242 +11 +5.68429 +21 +-2.52101 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68429 +20 +-2.52101 +11 +5.68354 +21 +-2.51724 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68354 +20 +-2.51724 +11 +5.68354 +21 +-2.49756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68354 +20 +-2.49756 +11 +5.68429 +21 +-2.49379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68429 +20 +-2.49379 +11 +5.68643 +21 +-2.4906 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68643 +20 +-2.4906 +11 +5.68962 +21 +-2.48847 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68962 +20 +-2.48847 +11 +5.69339 +21 +-2.48772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.69339 +20 +-2.48772 +11 +5.73079 +21 +-2.48772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73079 +20 +-2.48772 +11 +5.73455 +21 +-2.48847 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73455 +20 +-2.48847 +11 +5.73775 +21 +-2.4906 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73775 +20 +-2.4906 +11 +5.73988 +21 +-2.49379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73988 +20 +-2.49379 +11 +5.74063 +21 +-2.49756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74063 +20 +-2.49756 +11 +5.74063 +21 +-2.51724 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74063 +20 +-2.51724 +11 +5.73988 +21 +-2.52101 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73988 +20 +-2.52101 +11 +5.73775 +21 +-2.5242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73775 +20 +-2.5242 +11 +5.73455 +21 +-2.52634 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73455 +20 +-2.52634 +11 +5.73079 +21 +-2.52709 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73079 +20 +-2.52709 +11 +5.71996 +21 +-2.52709 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71996 +20 +-2.52709 +11 +5.71996 +21 +-2.6162 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71996 +20 +-2.6162 +11 +5.78996 +21 +-2.6162 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78996 +20 +-2.6162 +11 +5.79125 +21 +-2.61649 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79125 +20 +-2.61649 +11 +5.79226 +21 +-2.61661 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79226 +20 +-2.61661 +11 +5.79226 +21 +-2.60571 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79226 +20 +-2.60571 +11 +5.79271 +21 +-2.60345 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79271 +20 +-2.60345 +11 +5.79399 +21 +-2.60153 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79399 +20 +-2.60153 +11 +5.79591 +21 +-2.60025 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79591 +20 +-2.60025 +11 +5.79817 +21 +-2.5998 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79817 +20 +-2.5998 +11 +5.80998 +21 +-2.5998 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80998 +20 +-2.5998 +11 +5.81224 +21 +-2.60025 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81224 +20 +-2.60025 +11 +5.81416 +21 +-2.60153 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81416 +20 +-2.60153 +11 +5.81544 +21 +-2.60345 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81544 +20 +-2.60345 +11 +5.81589 +21 +-2.60571 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81589 +20 +-2.60571 +11 +5.81589 +21 +-2.67067 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81589 +20 +-2.67067 +11 +5.81544 +21 +-2.67293 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81544 +20 +-2.67293 +11 +5.81416 +21 +-2.67485 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81416 +20 +-2.67485 +11 +5.81224 +21 +-2.67613 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81224 +20 +-2.67613 +11 +5.81195 +21 +-2.67618 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81195 +20 +-2.67618 +11 +5.81195 +21 +-2.78982 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81195 +20 +-2.78982 +11 +5.81195 +21 +-2.80581 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81195 +20 +-2.80581 +11 +5.89464 +21 +-2.88851 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89464 +20 +-2.88851 +11 +5.89535 +21 +-2.88963 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89535 +20 +-2.88963 +11 +5.89617 +21 +-2.89066 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89617 +20 +-2.89066 +11 +5.89627 +21 +-2.89109 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89627 +20 +-2.89109 +11 +5.89651 +21 +-2.89147 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89651 +20 +-2.89147 +11 +5.89665 +21 +-2.89279 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89665 +20 +-2.89279 +11 +5.89695 +21 +-2.89407 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89695 +20 +-2.89407 +11 +5.89695 +21 +-2.89819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89695 +20 +-2.89819 +11 +5.89941 +21 +-2.89819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89941 +20 +-2.89819 +11 +5.90318 +21 +-2.89894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90318 +20 +-2.89894 +11 +5.90637 +21 +-2.90107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90637 +20 +-2.90107 +11 +5.9085 +21 +-2.90426 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9085 +20 +-2.90426 +11 +5.90925 +21 +-2.90803 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90925 +20 +-2.90803 +11 +5.90925 +21 +-2.94346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90925 +20 +-2.94346 +11 +5.9085 +21 +-2.94723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9085 +20 +-2.94723 +11 +5.90637 +21 +-2.95042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90637 +20 +-2.95042 +11 +5.90318 +21 +-2.95256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90318 +20 +-2.95256 +11 +5.89941 +21 +-2.95331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89941 +20 +-2.95331 +11 +5.89602 +21 +-2.95331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89602 +20 +-2.95331 +11 +5.89602 +21 +-2.97819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89602 +20 +-2.97819 +11 +5.89848 +21 +-2.97819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89848 +20 +-2.97819 +11 +5.90225 +21 +-2.97894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90225 +20 +-2.97894 +11 +5.90544 +21 +-2.98107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90544 +20 +-2.98107 +11 +5.90758 +21 +-2.98426 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90758 +20 +-2.98426 +11 +5.90833 +21 +-2.98803 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90833 +20 +-2.98803 +11 +5.90833 +21 +-3.02346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90833 +20 +-3.02346 +11 +5.90758 +21 +-3.02723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90758 +20 +-3.02723 +11 +5.90544 +21 +-3.03042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90544 +20 +-3.03042 +11 +5.90225 +21 +-3.03256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90225 +20 +-3.03256 +11 +5.89848 +21 +-3.03331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89848 +20 +-3.03331 +11 +5.87781 +21 +-3.03331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87781 +20 +-3.03331 +11 +5.87405 +21 +-3.03256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87405 +20 +-3.03256 +11 +5.87086 +21 +-3.03042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87086 +20 +-3.03042 +11 +5.86872 +21 +-3.02723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86872 +20 +-3.02723 +11 +5.86797 +21 +-3.02346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86797 +20 +-3.02346 +11 +5.86797 +21 +-2.98803 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86797 +20 +-2.98803 +11 +5.86872 +21 +-2.98426 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86872 +20 +-2.98426 +11 +5.87086 +21 +-2.98107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87086 +20 +-2.98107 +11 +5.87405 +21 +-2.97894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87405 +20 +-2.97894 +11 +5.87781 +21 +-2.97819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87781 +20 +-2.97819 +11 +5.88028 +21 +-2.97819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88028 +20 +-2.97819 +11 +5.88028 +21 +-2.95331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88028 +20 +-2.95331 +11 +5.87874 +21 +-2.95331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87874 +20 +-2.95331 +11 +5.87497 +21 +-2.95256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87497 +20 +-2.95256 +11 +5.87178 +21 +-2.95042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87178 +20 +-2.95042 +11 +5.86965 +21 +-2.94723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86965 +20 +-2.94723 +11 +5.8689 +21 +-2.94346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8689 +20 +-2.94346 +11 +5.8689 +21 +-2.90803 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8689 +20 +-2.90803 +11 +5.86965 +21 +-2.90426 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86965 +20 +-2.90426 +11 +5.87178 +21 +-2.90107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87178 +20 +-2.90107 +11 +5.87497 +21 +-2.89894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87497 +20 +-2.89894 +11 +5.87874 +21 +-2.89819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87874 +20 +-2.89819 +11 +5.8812 +21 +-2.89819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8812 +20 +-2.89819 +11 +5.8812 +21 +-2.89734 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8812 +20 +-2.89734 +11 +5.79851 +21 +-2.81464 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79851 +20 +-2.81464 +11 +5.7978 +21 +-2.81352 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7978 +20 +-2.81352 +11 +5.79698 +21 +-2.81249 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79698 +20 +-2.81249 +11 +5.79688 +21 +-2.81205 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79688 +20 +-2.81205 +11 +5.79664 +21 +-2.81168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79664 +20 +-2.81168 +11 +5.79649 +21 +-2.81036 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79649 +20 +-2.81036 +11 +5.7962 +21 +-2.80907 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7962 +20 +-2.80907 +11 +5.7962 +21 +-2.80883 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7962 +20 +-2.80883 +11 +5.76787 +21 +-2.83716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76787 +20 +-2.83716 +11 +5.76787 +21 +-3.31174 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76787 +20 +-3.31174 +11 +5.8349 +21 +-3.37876 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8349 +20 +-3.37876 +11 +5.8356 +21 +-3.37988 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8356 +20 +-3.37988 +11 +5.83642 +21 +-3.38091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83642 +20 +-3.38091 +11 +5.83652 +21 +-3.38135 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83652 +20 +-3.38135 +11 +5.83676 +21 +-3.38173 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83676 +20 +-3.38173 +11 +5.83691 +21 +-3.38304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83691 +20 +-3.38304 +11 +5.8372 +21 +-3.38433 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8372 +20 +-3.38433 +11 +5.8372 +21 +-3.44079 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8372 +20 +-3.44079 +11 +5.9061 +21 +-3.44079 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9061 +20 +-3.44079 +11 +5.90987 +21 +-3.44154 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90987 +20 +-3.44154 +11 +5.91306 +21 +-3.44367 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91306 +20 +-3.44367 +11 +5.9152 +21 +-3.44686 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9152 +20 +-3.44686 +11 +5.91594 +21 +-3.45063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91594 +20 +-3.45063 +11 +5.91594 +21 +-3.52937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91594 +20 +-3.52937 +11 +5.9152 +21 +-3.53314 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9152 +20 +-3.53314 +11 +5.91306 +21 +-3.53633 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91306 +20 +-3.53633 +11 +5.90987 +21 +-3.53846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90987 +20 +-3.53846 +11 +5.9061 +21 +-3.53921 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9061 +20 +-3.53921 +11 +5.75256 +21 +-3.53921 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75256 +20 +-3.53921 +11 +5.74879 +21 +-3.53846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74879 +20 +-3.53846 +11 +5.7456 +21 +-3.53633 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7456 +20 +-3.53633 +11 +5.74347 +21 +-3.53314 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74347 +20 +-3.53314 +11 +5.74272 +21 +-3.52937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74272 +20 +-3.52937 +11 +5.74272 +21 +-3.45063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74272 +20 +-3.45063 +11 +5.74347 +21 +-3.44686 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74347 +20 +-3.44686 +11 +5.7456 +21 +-3.44367 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7456 +20 +-3.44367 +11 +5.74879 +21 +-3.44154 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74879 +20 +-3.44154 +11 +5.75256 +21 +-3.44079 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75256 +20 +-3.44079 +11 +5.82146 +21 +-3.44079 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82146 +20 +-3.44079 +11 +5.82146 +21 +-3.38759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82146 +20 +-3.38759 +11 +5.75443 +21 +-3.32057 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75443 +20 +-3.32057 +11 +5.75373 +21 +-3.31945 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75373 +20 +-3.31945 +11 +5.75291 +21 +-3.31842 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75291 +20 +-3.31842 +11 +5.75281 +21 +-3.31798 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75281 +20 +-3.31798 +11 +5.75257 +21 +-3.3176 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75257 +20 +-3.3176 +11 +5.75242 +21 +-3.31629 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75242 +20 +-3.31629 +11 +5.75213 +21 +-3.315 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75213 +20 +-3.315 +11 +5.75213 +21 +-2.8339 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75213 +20 +-2.8339 +11 +5.75242 +21 +-2.83261 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75242 +20 +-2.83261 +11 +5.75257 +21 +-2.8313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75257 +20 +-2.8313 +11 +5.75281 +21 +-2.83092 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75281 +20 +-2.83092 +11 +5.75291 +21 +-2.83048 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75291 +20 +-2.83048 +11 +5.75373 +21 +-2.82945 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75373 +20 +-2.82945 +11 +5.75443 +21 +-2.82833 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75443 +20 +-2.82833 +11 +5.7962 +21 +-2.78656 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7962 +20 +-2.78656 +11 +5.7962 +21 +-2.67618 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7962 +20 +-2.67618 +11 +5.79591 +21 +-2.67613 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79591 +20 +-2.67613 +11 +5.79399 +21 +-2.67485 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79399 +20 +-2.67485 +11 +5.79271 +21 +-2.67293 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79271 +20 +-2.67293 +11 +5.79226 +21 +-2.67067 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79226 +20 +-2.67067 +11 +5.79226 +21 +-2.63751 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79226 +20 +-2.63751 +11 +5.7867 +21 +-2.63195 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7867 +20 +-2.63195 +11 +5.71756 +21 +-2.63195 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71756 +20 +-2.63195 +11 +5.71756 +21 +-2.63441 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71756 +20 +-2.63441 +11 +5.71681 +21 +-2.63818 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71681 +20 +-2.63818 +11 +5.71468 +21 +-2.64137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71468 +20 +-2.64137 +11 +5.71148 +21 +-2.6435 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71148 +20 +-2.6435 +11 +5.70772 +21 +-2.64425 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70772 +20 +-2.64425 +11 +5.67228 +21 +-2.64425 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67228 +20 +-2.64425 +11 +5.66852 +21 +-2.6435 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66852 +20 +-2.6435 +11 +5.66532 +21 +-2.64137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66532 +20 +-2.64137 +11 +5.66319 +21 +-2.63818 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66319 +20 +-2.63818 +11 +5.66244 +21 +-2.63441 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66244 +20 +-2.63441 +11 +5.66244 +21 +-2.63195 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66244 +20 +-2.63195 +11 +5.62907 +21 +-2.63195 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62907 +20 +-2.63195 +11 +5.62779 +21 +-2.63165 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62779 +20 +-2.63165 +11 +5.62647 +21 +-2.63151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62647 +20 +-2.63151 +11 +5.62609 +21 +-2.63127 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62609 +20 +-2.63127 +11 +5.62566 +21 +-2.63117 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62566 +20 +-2.63117 +11 +5.62463 +21 +-2.63035 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62463 +20 +-2.63035 +11 +5.62351 +21 +-2.62964 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62351 +20 +-2.62964 +11 +5.55758 +21 +-2.56372 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55758 +20 +-2.56372 +11 +5.55688 +21 +-2.5626 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55688 +20 +-2.5626 +11 +5.55606 +21 +-2.56157 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55606 +20 +-2.56157 +11 +5.55596 +21 +-2.56113 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55596 +20 +-2.56113 +11 +5.55572 +21 +-2.56075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55572 +20 +-2.56075 +11 +5.55557 +21 +-2.55944 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55557 +20 +-2.55944 +11 +5.55528 +21 +-2.55815 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55528 +20 +-2.55815 +11 +5.55528 +21 +-2.25937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55528 +20 +-2.25937 +11 +5.54346 +21 +-2.25937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54346 +20 +-2.25937 +11 +5.53928 +21 +-2.25892 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53928 +20 +-2.25892 +11 +5.53403 +21 +-2.25696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53403 +20 +-2.25696 +11 +5.52955 +21 +-2.2536 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52955 +20 +-2.2536 +11 +5.52619 +21 +-2.24912 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52619 +20 +-2.24912 +11 +5.52423 +21 +-2.24387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52423 +20 +-2.24387 +11 +5.52378 +21 +-2.23969 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52378 +20 +-2.23969 +11 +5.52378 +21 +-2.20031 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52378 +20 +-2.20031 +11 +5.52423 +21 +-2.19613 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52423 +20 +-2.19613 +11 +5.52619 +21 +-2.19088 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52619 +20 +-2.19088 +11 +5.52955 +21 +-2.1864 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52955 +20 +-2.1864 +11 +5.53403 +21 +-2.18304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53403 +20 +-2.18304 +11 +5.53928 +21 +-2.18108 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53928 +20 +-2.18108 +11 +5.54346 +21 +-2.18063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54346 +20 +-2.18063 +11 +5.58283 +21 +-2.18063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.58283 +20 +-2.18063 +11 +5.58702 +21 +-2.18108 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71148 +20 +-2.8115 +11 +5.71468 +21 +-2.81363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71468 +20 +-2.81363 +11 +5.71681 +21 +-2.81682 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71681 +20 +-2.81682 +11 +5.71756 +21 +-2.82059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71756 +20 +-2.82059 +11 +5.71756 +21 +-2.84126 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71756 +20 +-2.84126 +11 +5.71681 +21 +-2.84503 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71681 +20 +-2.84503 +11 +5.71468 +21 +-2.84822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71468 +20 +-2.84822 +11 +5.71148 +21 +-2.85035 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71148 +20 +-2.85035 +11 +5.70772 +21 +-2.8511 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70772 +20 +-2.8511 +11 +5.7038 +21 +-2.8511 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7038 +20 +-2.8511 +11 +5.7038 +21 +-2.87244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7038 +20 +-2.87244 +11 +5.70626 +21 +-2.87244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70626 +20 +-2.87244 +11 +5.71003 +21 +-2.87319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71003 +20 +-2.87319 +11 +5.71322 +21 +-2.87532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71322 +20 +-2.87532 +11 +5.71535 +21 +-2.87852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71535 +20 +-2.87852 +11 +5.7161 +21 +-2.88228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7161 +20 +-2.88228 +11 +5.7161 +21 +-2.91772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7161 +20 +-2.91772 +11 +5.71535 +21 +-2.92148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71535 +20 +-2.92148 +11 +5.71322 +21 +-2.92468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71322 +20 +-2.92468 +11 +5.71003 +21 +-2.92681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71003 +20 +-2.92681 +11 +5.70626 +21 +-2.92756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70626 +20 +-2.92756 +11 +5.68559 +21 +-2.92756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68559 +20 +-2.92756 +11 +5.68182 +21 +-2.92681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68182 +20 +-2.92681 +11 +5.67863 +21 +-2.92468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67863 +20 +-2.92468 +11 +5.6765 +21 +-2.92148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6765 +20 +-2.92148 +11 +5.67575 +21 +-2.91772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67575 +20 +-2.91772 +11 +5.67575 +21 +-2.88228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67575 +20 +-2.88228 +11 +5.6765 +21 +-2.87852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6765 +20 +-2.87852 +11 +5.67863 +21 +-2.87532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67863 +20 +-2.87532 +11 +5.68182 +21 +-2.87319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68182 +20 +-2.87319 +11 +5.68559 +21 +-2.87244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68559 +20 +-2.87244 +11 +5.68805 +21 +-2.87244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68805 +20 +-2.87244 +11 +5.68805 +21 +-2.8511 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68805 +20 +-2.8511 +11 +5.67228 +21 +-2.8511 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67228 +20 +-2.8511 +11 +5.66852 +21 +-2.85035 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66852 +20 +-2.85035 +11 +5.66532 +21 +-2.84822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66532 +20 +-2.84822 +11 +5.66319 +21 +-2.84503 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66319 +20 +-2.84503 +11 +5.66244 +21 +-2.84126 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66244 +20 +-2.84126 +11 +5.66244 +21 +-2.82059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66244 +20 +-2.82059 +11 +5.66319 +21 +-2.81682 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66319 +20 +-2.81682 +11 +5.66532 +21 +-2.81363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66532 +20 +-2.81363 +11 +5.66852 +21 +-2.8115 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66852 +20 +-2.8115 +11 +5.67228 +21 +-2.81075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67228 +20 +-2.81075 +11 +5.70772 +21 +-2.81075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70772 +20 +-2.81075 +11 +5.71148 +21 +-2.8115 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57503 +20 +-2.87319 +11 +5.57822 +21 +-2.87532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57822 +20 +-2.87532 +11 +5.58035 +21 +-2.87852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.58035 +20 +-2.87852 +11 +5.5811 +21 +-2.88228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5811 +20 +-2.88228 +11 +5.5811 +21 +-2.89213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5811 +20 +-2.89213 +11 +5.6039 +21 +-2.89213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6039 +20 +-2.89213 +11 +5.6039 +21 +-2.88228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6039 +20 +-2.88228 +11 +5.60465 +21 +-2.87852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60465 +20 +-2.87852 +11 +5.60678 +21 +-2.87532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60678 +20 +-2.87532 +11 +5.60997 +21 +-2.87319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60997 +20 +-2.87319 +11 +5.61374 +21 +-2.87244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61374 +20 +-2.87244 +11 +5.63441 +21 +-2.87244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63441 +20 +-2.87244 +11 +5.63818 +21 +-2.87319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63818 +20 +-2.87319 +11 +5.64137 +21 +-2.87532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64137 +20 +-2.87532 +11 +5.6435 +21 +-2.87852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6435 +20 +-2.87852 +11 +5.64425 +21 +-2.88228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64425 +20 +-2.88228 +11 +5.64425 +21 +-2.91772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64425 +20 +-2.91772 +11 +5.6435 +21 +-2.92148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6435 +20 +-2.92148 +11 +5.64137 +21 +-2.92468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64137 +20 +-2.92468 +11 +5.63818 +21 +-2.92681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63818 +20 +-2.92681 +11 +5.63441 +21 +-2.92756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63441 +20 +-2.92756 +11 +5.61374 +21 +-2.92756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61374 +20 +-2.92756 +11 +5.60997 +21 +-2.92681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60997 +20 +-2.92681 +11 +5.60678 +21 +-2.92468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60678 +20 +-2.92468 +11 +5.60465 +21 +-2.92148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60465 +20 +-2.92148 +11 +5.6039 +21 +-2.91772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6039 +20 +-2.91772 +11 +5.6039 +21 +-2.90787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6039 +20 +-2.90787 +11 +5.5811 +21 +-2.90787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5811 +20 +-2.90787 +11 +5.5811 +21 +-2.91772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5811 +20 +-2.91772 +11 +5.58035 +21 +-2.92148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.58035 +20 +-2.92148 +11 +5.57822 +21 +-2.92468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57822 +20 +-2.92468 +11 +5.57503 +21 +-2.92681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57503 +20 +-2.92681 +11 +5.57126 +21 +-2.92756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57126 +20 +-2.92756 +11 +5.55059 +21 +-2.92756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55059 +20 +-2.92756 +11 +5.54682 +21 +-2.92681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54682 +20 +-2.92681 +11 +5.54363 +21 +-2.92468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54363 +20 +-2.92468 +11 +5.5415 +21 +-2.92148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5415 +20 +-2.92148 +11 +5.54075 +21 +-2.91772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54075 +20 +-2.91772 +11 +5.54075 +21 +-2.88228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54075 +20 +-2.88228 +11 +5.5415 +21 +-2.87852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5415 +20 +-2.87852 +11 +5.54363 +21 +-2.87532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54363 +20 +-2.87532 +11 +5.54682 +21 +-2.87319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54682 +20 +-2.87319 +11 +5.55059 +21 +-2.87244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55059 +20 +-2.87244 +11 +5.57126 +21 +-2.87244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57126 +20 +-2.87244 +11 +5.57503 +21 +-2.87319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4391 +20 +-2.87319 +11 +5.44229 +21 +-2.87532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44229 +20 +-2.87532 +11 +5.44443 +21 +-2.87852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44443 +20 +-2.87852 +11 +5.44518 +21 +-2.88228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44518 +20 +-2.88228 +11 +5.44518 +21 +-2.89213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44518 +20 +-2.89213 +11 +5.4689 +21 +-2.89213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4689 +20 +-2.89213 +11 +5.4689 +21 +-2.88228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4689 +20 +-2.88228 +11 +5.46965 +21 +-2.87852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.46965 +20 +-2.87852 +11 +5.47178 +21 +-2.87532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47178 +20 +-2.87532 +11 +5.47497 +21 +-2.87319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47497 +20 +-2.87319 +11 +5.47874 +21 +-2.87244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47874 +20 +-2.87244 +11 +5.49941 +21 +-2.87244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49941 +20 +-2.87244 +11 +5.50318 +21 +-2.87319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50318 +20 +-2.87319 +11 +5.50637 +21 +-2.87532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50637 +20 +-2.87532 +11 +5.5085 +21 +-2.87852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5085 +20 +-2.87852 +11 +5.50925 +21 +-2.88228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50925 +20 +-2.88228 +11 +5.50925 +21 +-2.91772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50925 +20 +-2.91772 +11 +5.5085 +21 +-2.92148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5085 +20 +-2.92148 +11 +5.50637 +21 +-2.92468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50637 +20 +-2.92468 +11 +5.50318 +21 +-2.92681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50318 +20 +-2.92681 +11 +5.49941 +21 +-2.92756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49941 +20 +-2.92756 +11 +5.47874 +21 +-2.92756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47874 +20 +-2.92756 +11 +5.47497 +21 +-2.92681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47497 +20 +-2.92681 +11 +5.47178 +21 +-2.92468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47178 +20 +-2.92468 +11 +5.46965 +21 +-2.92148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.46965 +20 +-2.92148 +11 +5.4689 +21 +-2.91772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4689 +20 +-2.91772 +11 +5.4689 +21 +-2.90787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4689 +20 +-2.90787 +11 +5.44518 +21 +-2.90787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44518 +20 +-2.90787 +11 +5.44518 +21 +-2.91772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44518 +20 +-2.91772 +11 +5.44443 +21 +-2.92148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44443 +20 +-2.92148 +11 +5.44229 +21 +-2.92468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44229 +20 +-2.92468 +11 +5.4391 +21 +-2.92681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4391 +20 +-2.92681 +11 +5.43533 +21 +-2.92756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43533 +20 +-2.92756 +11 +5.41467 +21 +-2.92756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41467 +20 +-2.92756 +11 +5.4109 +21 +-2.92681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4109 +20 +-2.92681 +11 +5.40771 +21 +-2.92468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40771 +20 +-2.92468 +11 +5.40557 +21 +-2.92148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40557 +20 +-2.92148 +11 +5.40482 +21 +-2.91772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40482 +20 +-2.91772 +11 +5.40482 +21 +-2.88228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40482 +20 +-2.88228 +11 +5.40557 +21 +-2.87852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40557 +20 +-2.87852 +11 +5.40771 +21 +-2.87532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40771 +20 +-2.87532 +11 +5.4109 +21 +-2.87319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4109 +20 +-2.87319 +11 +5.41467 +21 +-2.87244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41467 +20 +-2.87244 +11 +5.43533 +21 +-2.87244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43533 +20 +-2.87244 +11 +5.4391 +21 +-2.87319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38148 +20 +-2.8115 +11 +5.38468 +21 +-2.81363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38468 +20 +-2.81363 +11 +5.38681 +21 +-2.81682 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38681 +20 +-2.81682 +11 +5.38756 +21 +-2.82059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38756 +20 +-2.82059 +11 +5.38756 +21 +-2.84126 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38756 +20 +-2.84126 +11 +5.38681 +21 +-2.84503 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38681 +20 +-2.84503 +11 +5.38468 +21 +-2.84822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38468 +20 +-2.84822 +11 +5.38148 +21 +-2.85035 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38148 +20 +-2.85035 +11 +5.37772 +21 +-2.8511 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37772 +20 +-2.8511 +11 +5.36787 +21 +-2.8511 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36787 +20 +-2.8511 +11 +5.36787 +21 +-2.87361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36787 +20 +-2.87361 +11 +5.37044 +21 +-2.87532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37044 +20 +-2.87532 +11 +5.37258 +21 +-2.87852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37258 +20 +-2.87852 +11 +5.37333 +21 +-2.88228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37333 +20 +-2.88228 +11 +5.37333 +21 +-2.91772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37333 +20 +-2.91772 +11 +5.37258 +21 +-2.92148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37258 +20 +-2.92148 +11 +5.37044 +21 +-2.92468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37044 +20 +-2.92468 +11 +5.36725 +21 +-2.92681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36725 +20 +-2.92681 +11 +5.36348 +21 +-2.92756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36348 +20 +-2.92756 +11 +5.34281 +21 +-2.92756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34281 +20 +-2.92756 +11 +5.33905 +21 +-2.92681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33905 +20 +-2.92681 +11 +5.33586 +21 +-2.92468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33586 +20 +-2.92468 +11 +5.33372 +21 +-2.92148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33372 +20 +-2.92148 +11 +5.33297 +21 +-2.91772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33297 +20 +-2.91772 +11 +5.33297 +21 +-2.88228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33297 +20 +-2.88228 +11 +5.33372 +21 +-2.87852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33372 +20 +-2.87852 +11 +5.33586 +21 +-2.87532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33586 +20 +-2.87532 +11 +5.33905 +21 +-2.87319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33905 +20 +-2.87319 +11 +5.34281 +21 +-2.87244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34281 +20 +-2.87244 +11 +5.35213 +21 +-2.87244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.35213 +20 +-2.87244 +11 +5.35213 +21 +-2.8511 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.35213 +20 +-2.8511 +11 +5.34228 +21 +-2.8511 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34228 +20 +-2.8511 +11 +5.33852 +21 +-2.85035 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33852 +20 +-2.85035 +11 +5.33532 +21 +-2.84822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33532 +20 +-2.84822 +11 +5.33319 +21 +-2.84503 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33319 +20 +-2.84503 +11 +5.33244 +21 +-2.84126 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33244 +20 +-2.84126 +11 +5.33244 +21 +-2.82059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33244 +20 +-2.82059 +11 +5.33319 +21 +-2.81682 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33319 +20 +-2.81682 +11 +5.33532 +21 +-2.81363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33532 +20 +-2.81363 +11 +5.33852 +21 +-2.8115 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33852 +20 +-2.8115 +11 +5.34228 +21 +-2.81075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34228 +20 +-2.81075 +11 +5.37772 +21 +-2.81075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37772 +20 +-2.81075 +11 +5.38148 +21 +-2.8115 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91224 +20 +-2.60025 +11 +5.91416 +21 +-2.60153 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91416 +20 +-2.60153 +11 +5.91544 +21 +-2.60345 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91544 +20 +-2.60345 +11 +5.91589 +21 +-2.60571 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91589 +20 +-2.60571 +11 +5.91589 +21 +-2.67067 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91589 +20 +-2.67067 +11 +5.91544 +21 +-2.67293 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91544 +20 +-2.67293 +11 +5.91416 +21 +-2.67485 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91416 +20 +-2.67485 +11 +5.91224 +21 +-2.67613 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91224 +20 +-2.67613 +11 +5.91195 +21 +-2.67618 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91195 +20 +-2.67618 +11 +5.91195 +21 +-2.70319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91195 +20 +-2.70319 +11 +5.93126 +21 +-2.70319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93126 +20 +-2.70319 +11 +5.93503 +21 +-2.70394 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93503 +20 +-2.70394 +11 +5.93822 +21 +-2.70607 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93822 +20 +-2.70607 +11 +5.94035 +21 +-2.70926 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94035 +20 +-2.70926 +11 +5.9411 +21 +-2.71303 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9411 +20 +-2.71303 +11 +5.9411 +21 +-2.74846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9411 +20 +-2.74846 +11 +5.94035 +21 +-2.75223 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94035 +20 +-2.75223 +11 +5.93822 +21 +-2.75542 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93822 +20 +-2.75542 +11 +5.93503 +21 +-2.75756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93503 +20 +-2.75756 +11 +5.93126 +21 +-2.75831 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93126 +20 +-2.75831 +11 +5.9288 +21 +-2.75831 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9288 +20 +-2.75831 +11 +5.9288 +21 +-2.78645 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9288 +20 +-2.78645 +11 +5.93599 +21 +-2.78863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93599 +20 +-2.78863 +11 +5.9428 +21 +-2.79226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9428 +20 +-2.79226 +11 +5.94876 +21 +-2.79716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94876 +20 +-2.79716 +11 +5.95366 +21 +-2.80313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95366 +20 +-2.80313 +11 +5.9573 +21 +-2.80993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9573 +20 +-2.80993 +11 +5.95954 +21 +-2.81732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95954 +20 +-2.81732 +11 +5.9603 +21 +-2.825 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9603 +20 +-2.825 +11 +5.95954 +21 +-2.83268 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95954 +20 +-2.83268 +11 +5.9573 +21 +-2.84007 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9573 +20 +-2.84007 +11 +5.95366 +21 +-2.84687 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95366 +20 +-2.84687 +11 +5.94876 +21 +-2.85284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94876 +20 +-2.85284 +11 +5.9428 +21 +-2.85774 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9428 +20 +-2.85774 +11 +5.93599 +21 +-2.86137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93599 +20 +-2.86137 +11 +5.92861 +21 +-2.86361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92861 +20 +-2.86361 +11 +5.92093 +21 +-2.86437 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92093 +20 +-2.86437 +11 +5.91324 +21 +-2.86361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91324 +20 +-2.86361 +11 +5.90586 +21 +-2.86137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90586 +20 +-2.86137 +11 +5.89905 +21 +-2.85774 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89905 +20 +-2.85774 +11 +5.89309 +21 +-2.85284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89309 +20 +-2.85284 +11 +5.88819 +21 +-2.84687 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88819 +20 +-2.84687 +11 +5.88455 +21 +-2.84007 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88455 +20 +-2.84007 +11 +5.88231 +21 +-2.83268 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88231 +20 +-2.83268 +11 +5.88156 +21 +-2.825 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88156 +20 +-2.825 +11 +5.88231 +21 +-2.81732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88231 +20 +-2.81732 +11 +5.88455 +21 +-2.80993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88455 +20 +-2.80993 +11 +5.88819 +21 +-2.80313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88819 +20 +-2.80313 +11 +5.89309 +21 +-2.79716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89309 +20 +-2.79716 +11 +5.89905 +21 +-2.79226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89905 +20 +-2.79226 +11 +5.90586 +21 +-2.78863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90586 +20 +-2.78863 +11 +5.91305 +21 +-2.78645 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91305 +20 +-2.78645 +11 +5.91305 +21 +-2.75831 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91305 +20 +-2.75831 +11 +5.91059 +21 +-2.75831 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91059 +20 +-2.75831 +11 +5.90682 +21 +-2.75756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90682 +20 +-2.75756 +11 +5.90363 +21 +-2.75542 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90363 +20 +-2.75542 +11 +5.9015 +21 +-2.75223 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9015 +20 +-2.75223 +11 +5.90075 +21 +-2.74846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90075 +20 +-2.74846 +11 +5.90075 +21 +-2.72171 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90075 +20 +-2.72171 +11 +5.89851 +21 +-2.71947 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89851 +20 +-2.71947 +11 +5.8978 +21 +-2.71835 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8978 +20 +-2.71835 +11 +5.89698 +21 +-2.71731 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89698 +20 +-2.71731 +11 +5.89688 +21 +-2.71688 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89688 +20 +-2.71688 +11 +5.89664 +21 +-2.7165 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89664 +20 +-2.7165 +11 +5.89649 +21 +-2.71519 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89649 +20 +-2.71519 +11 +5.8962 +21 +-2.7139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8962 +20 +-2.7139 +11 +5.8962 +21 +-2.67618 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8962 +20 +-2.67618 +11 +5.89591 +21 +-2.67613 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89591 +20 +-2.67613 +11 +5.89399 +21 +-2.67485 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89399 +20 +-2.67485 +11 +5.89271 +21 +-2.67293 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89271 +20 +-2.67293 +11 +5.89226 +21 +-2.67067 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89226 +20 +-2.67067 +11 +5.89226 +21 +-2.60571 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89226 +20 +-2.60571 +11 +5.89271 +21 +-2.60345 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89271 +20 +-2.60345 +11 +5.89399 +21 +-2.60153 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89399 +20 +-2.60153 +11 +5.89591 +21 +-2.60025 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89591 +20 +-2.60025 +11 +5.89817 +21 +-2.5998 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89817 +20 +-2.5998 +11 +5.90998 +21 +-2.5998 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90998 +20 +-2.5998 +11 +5.91224 +21 +-2.60025 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71148 +20 +-2.6765 +11 +5.71468 +21 +-2.67863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71468 +20 +-2.67863 +11 +5.71681 +21 +-2.68182 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71681 +20 +-2.68182 +11 +5.71756 +21 +-2.68559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71756 +20 +-2.68559 +11 +5.71756 +21 +-2.68864 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71756 +20 +-2.68864 +11 +5.71991 +21 +-2.68977 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71991 +20 +-2.68977 +11 +5.72209 +21 +-2.69251 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72209 +20 +-2.69251 +11 +5.72287 +21 +-2.69593 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72287 +20 +-2.69593 +11 +5.72287 +21 +-2.75907 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72287 +20 +-2.75907 +11 +5.72209 +21 +-2.76249 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72209 +20 +-2.76249 +11 +5.71991 +21 +-2.76523 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71991 +20 +-2.76523 +11 +5.71756 +21 +-2.76636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71756 +20 +-2.76636 +11 +5.71756 +21 +-2.76941 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71756 +20 +-2.76941 +11 +5.71681 +21 +-2.77318 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71681 +20 +-2.77318 +11 +5.71468 +21 +-2.77637 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71468 +20 +-2.77637 +11 +5.71148 +21 +-2.7785 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71148 +20 +-2.7785 +11 +5.70772 +21 +-2.77925 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70772 +20 +-2.77925 +11 +5.67228 +21 +-2.77925 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67228 +20 +-2.77925 +11 +5.66852 +21 +-2.7785 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66852 +20 +-2.7785 +11 +5.66532 +21 +-2.77637 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66532 +20 +-2.77637 +11 +5.66319 +21 +-2.77318 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66319 +20 +-2.77318 +11 +5.66244 +21 +-2.76941 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66244 +20 +-2.76941 +11 +5.66244 +21 +-2.74874 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66244 +20 +-2.74874 +11 +5.66319 +21 +-2.74497 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66319 +20 +-2.74497 +11 +5.66532 +21 +-2.74178 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66532 +20 +-2.74178 +11 +5.66852 +21 +-2.73965 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66852 +20 +-2.73965 +11 +5.67228 +21 +-2.7389 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67228 +20 +-2.7389 +11 +5.70713 +21 +-2.7389 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70713 +20 +-2.7389 +11 +5.70713 +21 +-2.7161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70713 +20 +-2.7161 +11 +5.67228 +21 +-2.7161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67228 +20 +-2.7161 +11 +5.66852 +21 +-2.71535 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66852 +20 +-2.71535 +11 +5.66532 +21 +-2.71322 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66532 +20 +-2.71322 +11 +5.66319 +21 +-2.71003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66319 +20 +-2.71003 +11 +5.66244 +21 +-2.70626 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66244 +20 +-2.70626 +11 +5.66244 +21 +-2.68559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66244 +20 +-2.68559 +11 +5.66319 +21 +-2.68182 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66319 +20 +-2.68182 +11 +5.66532 +21 +-2.67863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66532 +20 +-2.67863 +11 +5.66852 +21 +-2.6765 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66852 +20 +-2.6765 +11 +5.67228 +21 +-2.67575 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67228 +20 +-2.67575 +11 +5.70772 +21 +-2.67575 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70772 +20 +-2.67575 +11 +5.71148 +21 +-2.6765 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38148 +20 +-2.6765 +11 +5.38468 +21 +-2.67863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38468 +20 +-2.67863 +11 +5.38681 +21 +-2.68182 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38681 +20 +-2.68182 +11 +5.38756 +21 +-2.68559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38756 +20 +-2.68559 +11 +5.38756 +21 +-2.70626 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38756 +20 +-2.70626 +11 +5.38681 +21 +-2.71003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38681 +20 +-2.71003 +11 +5.38468 +21 +-2.71322 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38468 +20 +-2.71322 +11 +5.38148 +21 +-2.71535 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38148 +20 +-2.71535 +11 +5.37772 +21 +-2.7161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37772 +20 +-2.7161 +11 +5.36787 +21 +-2.7161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36787 +20 +-2.7161 +11 +5.36787 +21 +-2.7389 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36787 +20 +-2.7389 +11 +5.37772 +21 +-2.7389 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37772 +20 +-2.7389 +11 +5.38148 +21 +-2.73965 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38148 +20 +-2.73965 +11 +5.38468 +21 +-2.74178 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38468 +20 +-2.74178 +11 +5.38681 +21 +-2.74497 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38681 +20 +-2.74497 +11 +5.38756 +21 +-2.74874 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38756 +20 +-2.74874 +11 +5.38756 +21 +-2.76941 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38756 +20 +-2.76941 +11 +5.38681 +21 +-2.77318 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38681 +20 +-2.77318 +11 +5.38468 +21 +-2.77637 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38468 +20 +-2.77637 +11 +5.38148 +21 +-2.7785 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38148 +20 +-2.7785 +11 +5.37772 +21 +-2.77925 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37772 +20 +-2.77925 +11 +5.34228 +21 +-2.77925 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34228 +20 +-2.77925 +11 +5.33852 +21 +-2.7785 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33852 +20 +-2.7785 +11 +5.33532 +21 +-2.77637 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33532 +20 +-2.77637 +11 +5.33319 +21 +-2.77318 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33319 +20 +-2.77318 +11 +5.33244 +21 +-2.76941 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33244 +20 +-2.76941 +11 +5.33244 +21 +-2.74874 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33244 +20 +-2.74874 +11 +5.33319 +21 +-2.74497 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33319 +20 +-2.74497 +11 +5.33532 +21 +-2.74178 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33532 +20 +-2.74178 +11 +5.33852 +21 +-2.73965 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33852 +20 +-2.73965 +11 +5.34228 +21 +-2.7389 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34228 +20 +-2.7389 +11 +5.35213 +21 +-2.7389 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.35213 +20 +-2.7389 +11 +5.35213 +21 +-2.7161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.35213 +20 +-2.7161 +11 +5.34228 +21 +-2.7161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34228 +20 +-2.7161 +11 +5.33852 +21 +-2.71535 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33852 +20 +-2.71535 +11 +5.33532 +21 +-2.71322 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33532 +20 +-2.71322 +11 +5.33319 +21 +-2.71003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33319 +20 +-2.71003 +11 +5.33244 +21 +-2.70626 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33244 +20 +-2.70626 +11 +5.33244 +21 +-2.68559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33244 +20 +-2.68559 +11 +5.33319 +21 +-2.68182 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33319 +20 +-2.68182 +11 +5.33532 +21 +-2.67863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33532 +20 +-2.67863 +11 +5.33852 +21 +-2.6765 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33852 +20 +-2.6765 +11 +5.34228 +21 +-2.67575 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34228 +20 +-2.67575 +11 +5.37772 +21 +-2.67575 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37772 +20 +-2.67575 +11 +5.38148 +21 +-2.6765 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05056 +20 +-2.5065 +11 +6.05375 +21 +-2.50863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05375 +20 +-2.50863 +11 +6.05588 +21 +-2.51182 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05588 +20 +-2.51182 +11 +6.05663 +21 +-2.51559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05663 +20 +-2.51559 +11 +6.05663 +21 +-2.53626 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05663 +20 +-2.53626 +11 +6.05588 +21 +-2.54003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05588 +20 +-2.54003 +11 +6.05375 +21 +-2.54322 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05375 +20 +-2.54322 +11 +6.05056 +21 +-2.54535 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05056 +20 +-2.54535 +11 +6.04679 +21 +-2.5461 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04679 +20 +-2.5461 +11 +6.02003 +21 +-2.5461 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02003 +20 +-2.5461 +11 +6.01057 +21 +-2.55557 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01057 +20 +-2.55557 +11 +6.00945 +21 +-2.55627 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00945 +20 +-2.55627 +11 +6.00842 +21 +-2.55709 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00842 +20 +-2.55709 +11 +6.00798 +21 +-2.55719 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00798 +20 +-2.55719 +11 +6.0076 +21 +-2.55743 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0076 +20 +-2.55743 +11 +6.00629 +21 +-2.55758 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00629 +20 +-2.55758 +11 +6.005 +21 +-2.55787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.005 +20 +-2.55787 +11 +5.86401 +21 +-2.55787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86401 +20 +-2.55787 +11 +5.86195 +21 +-2.55993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86195 +20 +-2.55993 +11 +5.86195 +21 +-2.60019 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86195 +20 +-2.60019 +11 +5.86224 +21 +-2.60025 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86224 +20 +-2.60025 +11 +5.86416 +21 +-2.60153 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86416 +20 +-2.60153 +11 +5.86544 +21 +-2.60345 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86544 +20 +-2.60345 +11 +5.86589 +21 +-2.60571 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86589 +20 +-2.60571 +11 +5.86589 +21 +-2.67067 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86589 +20 +-2.67067 +11 +5.86544 +21 +-2.67293 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86544 +20 +-2.67293 +11 +5.86416 +21 +-2.67485 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86416 +20 +-2.67485 +11 +5.86224 +21 +-2.67613 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86224 +20 +-2.67613 +11 +5.86195 +21 +-2.67618 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86195 +20 +-2.67618 +11 +5.86195 +21 +-2.70369 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86195 +20 +-2.70369 +11 +5.86318 +21 +-2.70394 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86318 +20 +-2.70394 +11 +5.86637 +21 +-2.70607 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86637 +20 +-2.70607 +11 +5.8685 +21 +-2.70926 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8685 +20 +-2.70926 +11 +5.86925 +21 +-2.71303 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86925 +20 +-2.71303 +11 +5.86925 +21 +-2.74846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86925 +20 +-2.74846 +11 +5.8685 +21 +-2.75223 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8685 +20 +-2.75223 +11 +5.86637 +21 +-2.75542 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86637 +20 +-2.75542 +11 +5.86318 +21 +-2.75756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86318 +20 +-2.75756 +11 +5.85941 +21 +-2.75831 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85941 +20 +-2.75831 +11 +5.83874 +21 +-2.75831 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83874 +20 +-2.75831 +11 +5.83497 +21 +-2.75756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83497 +20 +-2.75756 +11 +5.83178 +21 +-2.75542 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83178 +20 +-2.75542 +11 +5.82965 +21 +-2.75223 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82965 +20 +-2.75223 +11 +5.8289 +21 +-2.74846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8289 +20 +-2.74846 +11 +5.8289 +21 +-2.71303 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8289 +20 +-2.71303 +11 +5.82965 +21 +-2.70926 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82965 +20 +-2.70926 +11 +5.83178 +21 +-2.70607 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83178 +20 +-2.70607 +11 +5.83497 +21 +-2.70394 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83497 +20 +-2.70394 +11 +5.83874 +21 +-2.70319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83874 +20 +-2.70319 +11 +5.8462 +21 +-2.70319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8462 +20 +-2.70319 +11 +5.8462 +21 +-2.67618 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8462 +20 +-2.67618 +11 +5.84591 +21 +-2.67613 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84591 +20 +-2.67613 +11 +5.84399 +21 +-2.67485 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84399 +20 +-2.67485 +11 +5.84271 +21 +-2.67293 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84271 +20 +-2.67293 +11 +5.84226 +21 +-2.67067 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84226 +20 +-2.67067 +11 +5.84226 +21 +-2.60571 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84226 +20 +-2.60571 +11 +5.84271 +21 +-2.60345 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84271 +20 +-2.60345 +11 +5.84399 +21 +-2.60153 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84399 +20 +-2.60153 +11 +5.84591 +21 +-2.60025 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84591 +20 +-2.60025 +11 +5.8462 +21 +-2.60019 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8462 +20 +-2.60019 +11 +5.8462 +21 +-2.55667 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8462 +20 +-2.55667 +11 +5.84649 +21 +-2.55539 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84649 +20 +-2.55539 +11 +5.84664 +21 +-2.55407 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84664 +20 +-2.55407 +11 +5.84688 +21 +-2.55369 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84688 +20 +-2.55369 +11 +5.84698 +21 +-2.55326 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84698 +20 +-2.55326 +11 +5.8478 +21 +-2.55222 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8478 +20 +-2.55222 +11 +5.84851 +21 +-2.55111 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84851 +20 +-2.55111 +11 +5.85518 +21 +-2.54443 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85518 +20 +-2.54443 +11 +5.8563 +21 +-2.54373 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8563 +20 +-2.54373 +11 +5.85733 +21 +-2.54291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85733 +20 +-2.54291 +11 +5.85777 +21 +-2.54281 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85777 +20 +-2.54281 +11 +5.85815 +21 +-2.54257 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85815 +20 +-2.54257 +11 +5.85946 +21 +-2.54242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85946 +20 +-2.54242 +11 +5.86075 +21 +-2.54213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86075 +20 +-2.54213 +11 +6.00174 +21 +-2.54213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00174 +20 +-2.54213 +11 +6.0029 +21 +-2.54097 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0029 +20 +-2.54097 +11 +6.00226 +21 +-2.54003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00226 +20 +-2.54003 +11 +6.00152 +21 +-2.53626 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00152 +20 +-2.53626 +11 +6.00152 +21 +-2.51559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00152 +20 +-2.51559 +11 +6.00226 +21 +-2.51182 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00226 +20 +-2.51182 +11 +6.0044 +21 +-2.50863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0044 +20 +-2.50863 +11 +6.00759 +21 +-2.5065 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00759 +20 +-2.5065 +11 +6.01136 +21 +-2.50575 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01136 +20 +-2.50575 +11 +6.04679 +21 +-2.50575 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04679 +20 +-2.50575 +11 +6.05056 +21 +-2.5065 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38148 +20 +-2.5415 +11 +5.38468 +21 +-2.54363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38468 +20 +-2.54363 +11 +5.38681 +21 +-2.54682 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38681 +20 +-2.54682 +11 +5.38756 +21 +-2.55059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38756 +20 +-2.55059 +11 +5.38756 +21 +-2.57126 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38756 +20 +-2.57126 +11 +5.38681 +21 +-2.57503 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38681 +20 +-2.57503 +11 +5.38468 +21 +-2.57822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38468 +20 +-2.57822 +11 +5.38148 +21 +-2.58035 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38148 +20 +-2.58035 +11 +5.37772 +21 +-2.5811 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37772 +20 +-2.5811 +11 +5.36787 +21 +-2.5811 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36787 +20 +-2.5811 +11 +5.36787 +21 +-2.6039 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36787 +20 +-2.6039 +11 +5.37772 +21 +-2.6039 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37772 +20 +-2.6039 +11 +5.38148 +21 +-2.60465 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38148 +20 +-2.60465 +11 +5.38468 +21 +-2.60678 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38468 +20 +-2.60678 +11 +5.38681 +21 +-2.60997 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38681 +20 +-2.60997 +11 +5.38756 +21 +-2.61374 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38756 +20 +-2.61374 +11 +5.38756 +21 +-2.63441 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38756 +20 +-2.63441 +11 +5.38681 +21 +-2.63818 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38681 +20 +-2.63818 +11 +5.38468 +21 +-2.64137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38468 +20 +-2.64137 +11 +5.38148 +21 +-2.6435 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38148 +20 +-2.6435 +11 +5.37772 +21 +-2.64425 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37772 +20 +-2.64425 +11 +5.34228 +21 +-2.64425 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34228 +20 +-2.64425 +11 +5.33852 +21 +-2.6435 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33852 +20 +-2.6435 +11 +5.33532 +21 +-2.64137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33532 +20 +-2.64137 +11 +5.33319 +21 +-2.63818 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33319 +20 +-2.63818 +11 +5.33244 +21 +-2.63441 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33244 +20 +-2.63441 +11 +5.33244 +21 +-2.61374 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33244 +20 +-2.61374 +11 +5.33319 +21 +-2.60997 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33319 +20 +-2.60997 +11 +5.33532 +21 +-2.60678 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33532 +20 +-2.60678 +11 +5.33852 +21 +-2.60465 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33852 +20 +-2.60465 +11 +5.34228 +21 +-2.6039 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34228 +20 +-2.6039 +11 +5.35213 +21 +-2.6039 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.35213 +20 +-2.6039 +11 +5.35213 +21 +-2.5811 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.35213 +20 +-2.5811 +11 +5.34228 +21 +-2.5811 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34228 +20 +-2.5811 +11 +5.33852 +21 +-2.58035 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33852 +20 +-2.58035 +11 +5.33532 +21 +-2.57822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33532 +20 +-2.57822 +11 +5.33319 +21 +-2.57503 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33319 +20 +-2.57503 +11 +5.33244 +21 +-2.57126 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33244 +20 +-2.57126 +11 +5.33244 +21 +-2.55059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33244 +20 +-2.55059 +11 +5.33319 +21 +-2.54682 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33319 +20 +-2.54682 +11 +5.33532 +21 +-2.54363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33532 +20 +-2.54363 +11 +5.33852 +21 +-2.5415 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33852 +20 +-2.5415 +11 +5.34228 +21 +-2.54075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34228 +20 +-2.54075 +11 +5.37772 +21 +-2.54075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37772 +20 +-2.54075 +11 +5.38148 +21 +-2.5415 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38148 +20 +-2.40742 +11 +5.38468 +21 +-2.40956 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38468 +20 +-2.40956 +11 +5.38681 +21 +-2.41275 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38681 +20 +-2.41275 +11 +5.38756 +21 +-2.41652 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38756 +20 +-2.41652 +11 +5.38756 +21 +-2.43719 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38756 +20 +-2.43719 +11 +5.38681 +21 +-2.44095 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38681 +20 +-2.44095 +11 +5.38468 +21 +-2.44414 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38468 +20 +-2.44414 +11 +5.38148 +21 +-2.44628 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38148 +20 +-2.44628 +11 +5.37772 +21 +-2.44703 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37772 +20 +-2.44703 +11 +5.36787 +21 +-2.44703 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36787 +20 +-2.44703 +11 +5.36787 +21 +-2.4689 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36787 +20 +-2.4689 +11 +5.37772 +21 +-2.4689 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37772 +20 +-2.4689 +11 +5.38148 +21 +-2.46965 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38148 +20 +-2.46965 +11 +5.38468 +21 +-2.47178 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38468 +20 +-2.47178 +11 +5.38681 +21 +-2.47497 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38681 +20 +-2.47497 +11 +5.38756 +21 +-2.47874 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38756 +20 +-2.47874 +11 +5.38756 +21 +-2.49941 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38756 +20 +-2.49941 +11 +5.38681 +21 +-2.50318 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38681 +20 +-2.50318 +11 +5.38468 +21 +-2.50637 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38468 +20 +-2.50637 +11 +5.38148 +21 +-2.5085 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38148 +20 +-2.5085 +11 +5.37772 +21 +-2.50925 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37772 +20 +-2.50925 +11 +5.34228 +21 +-2.50925 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34228 +20 +-2.50925 +11 +5.33852 +21 +-2.5085 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33852 +20 +-2.5085 +11 +5.33532 +21 +-2.50637 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33532 +20 +-2.50637 +11 +5.33319 +21 +-2.50318 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33319 +20 +-2.50318 +11 +5.33244 +21 +-2.49941 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33244 +20 +-2.49941 +11 +5.33244 +21 +-2.47874 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33244 +20 +-2.47874 +11 +5.33319 +21 +-2.47497 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33319 +20 +-2.47497 +11 +5.33532 +21 +-2.47178 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33532 +20 +-2.47178 +11 +5.33852 +21 +-2.46965 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33852 +20 +-2.46965 +11 +5.34228 +21 +-2.4689 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34228 +20 +-2.4689 +11 +5.35213 +21 +-2.4689 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.35213 +20 +-2.4689 +11 +5.35213 +21 +-2.44703 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.35213 +20 +-2.44703 +11 +5.34228 +21 +-2.44703 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34228 +20 +-2.44703 +11 +5.33852 +21 +-2.44628 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33852 +20 +-2.44628 +11 +5.33532 +21 +-2.44414 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33532 +20 +-2.44414 +11 +5.33319 +21 +-2.44095 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33319 +20 +-2.44095 +11 +5.33244 +21 +-2.43719 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33244 +20 +-2.43719 +11 +5.33244 +21 +-2.41652 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33244 +20 +-2.41652 +11 +5.33319 +21 +-2.41275 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33319 +20 +-2.41275 +11 +5.33532 +21 +-2.40956 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33532 +20 +-2.40956 +11 +5.33852 +21 +-2.40742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33852 +20 +-2.40742 +11 +5.34228 +21 +-2.40667 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34228 +20 +-2.40667 +11 +5.37772 +21 +-2.40667 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37772 +20 +-2.40667 +11 +5.38148 +21 +-2.40742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04768 +20 +-2.31639 +11 +6.05507 +21 +-2.31863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05507 +20 +-2.31863 +11 +6.06187 +21 +-2.32226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06187 +20 +-2.32226 +11 +6.06784 +21 +-2.32716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06784 +20 +-2.32716 +11 +6.07274 +21 +-2.33313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07274 +20 +-2.33313 +11 +6.07637 +21 +-2.33993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07637 +20 +-2.33993 +11 +6.07861 +21 +-2.34732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07861 +20 +-2.34732 +11 +6.07937 +21 +-2.355 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07937 +20 +-2.355 +11 +6.07861 +21 +-2.36268 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07861 +20 +-2.36268 +11 +6.07637 +21 +-2.37007 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07637 +20 +-2.37007 +11 +6.07274 +21 +-2.37687 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07274 +20 +-2.37687 +11 +6.06784 +21 +-2.38284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06784 +20 +-2.38284 +11 +6.06187 +21 +-2.38774 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06187 +20 +-2.38774 +11 +6.05507 +21 +-2.39137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05507 +20 +-2.39137 +11 +6.04768 +21 +-2.39361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04768 +20 +-2.39361 +11 +6.04 +21 +-2.39437 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04 +20 +-2.39437 +11 +6.03232 +21 +-2.39361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03232 +20 +-2.39361 +11 +6.02493 +21 +-2.39137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02493 +20 +-2.39137 +11 +6.01986 +21 +-2.38866 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01986 +20 +-2.38866 +11 +5.96589 +21 +-2.44263 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96589 +20 +-2.44263 +11 +5.96589 +21 +-2.44398 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96589 +20 +-2.44398 +11 +5.9681 +21 +-2.4462 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9681 +20 +-2.4462 +11 +6.00152 +21 +-2.4462 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00152 +20 +-2.4462 +11 +6.00152 +21 +-2.44374 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00152 +20 +-2.44374 +11 +6.00226 +21 +-2.43997 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00226 +20 +-2.43997 +11 +6.0044 +21 +-2.43678 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0044 +20 +-2.43678 +11 +6.00759 +21 +-2.43465 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00759 +20 +-2.43465 +11 +6.01136 +21 +-2.4339 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01136 +20 +-2.4339 +11 +6.04679 +21 +-2.4339 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04679 +20 +-2.4339 +11 +6.05056 +21 +-2.43465 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05056 +20 +-2.43465 +11 +6.05375 +21 +-2.43678 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05375 +20 +-2.43678 +11 +6.05588 +21 +-2.43997 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05588 +20 +-2.43997 +11 +6.05663 +21 +-2.44374 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05663 +20 +-2.44374 +11 +6.05663 +21 +-2.46441 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05663 +20 +-2.46441 +11 +6.05588 +21 +-2.46818 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05588 +20 +-2.46818 +11 +6.05375 +21 +-2.47137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05375 +20 +-2.47137 +11 +6.05056 +21 +-2.4735 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05056 +20 +-2.4735 +11 +6.04679 +21 +-2.47425 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04679 +20 +-2.47425 +11 +6.01136 +21 +-2.47425 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01136 +20 +-2.47425 +11 +6.00759 +21 +-2.4735 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00759 +20 +-2.4735 +11 +6.0044 +21 +-2.47137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0044 +20 +-2.47137 +11 +6.00226 +21 +-2.46818 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00226 +20 +-2.46818 +11 +6.00152 +21 +-2.46441 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00152 +20 +-2.46441 +11 +6.00152 +21 +-2.46195 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00152 +20 +-2.46195 +11 +5.96589 +21 +-2.46195 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96589 +20 +-2.46195 +11 +5.96589 +21 +-2.47579 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96589 +20 +-2.47579 +11 +5.96544 +21 +-2.47805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96544 +20 +-2.47805 +11 +5.96416 +21 +-2.47996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96416 +20 +-2.47996 +11 +5.96224 +21 +-2.48124 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96224 +20 +-2.48124 +11 +5.95998 +21 +-2.48169 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95998 +20 +-2.48169 +11 +5.94817 +21 +-2.48169 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94817 +20 +-2.48169 +11 +5.94591 +21 +-2.48124 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94591 +20 +-2.48124 +11 +5.94399 +21 +-2.47996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94399 +20 +-2.47996 +11 +5.94271 +21 +-2.47805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94271 +20 +-2.47805 +11 +5.94226 +21 +-2.47579 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94226 +20 +-2.47579 +11 +5.94226 +21 +-2.45118 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94226 +20 +-2.45118 +11 +5.91589 +21 +-2.45118 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91589 +20 +-2.45118 +11 +5.91589 +21 +-2.47579 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91589 +20 +-2.47579 +11 +5.91544 +21 +-2.47805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91544 +20 +-2.47805 +11 +5.91416 +21 +-2.47996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91416 +20 +-2.47996 +11 +5.91224 +21 +-2.48124 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91224 +20 +-2.48124 +11 +5.90998 +21 +-2.48169 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90998 +20 +-2.48169 +11 +5.89817 +21 +-2.48169 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89817 +20 +-2.48169 +11 +5.89591 +21 +-2.48124 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89591 +20 +-2.48124 +11 +5.89399 +21 +-2.47996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89399 +20 +-2.47996 +11 +5.89271 +21 +-2.47805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89271 +20 +-2.47805 +11 +5.89226 +21 +-2.47579 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89226 +20 +-2.47579 +11 +5.89226 +21 +-2.41083 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89226 +20 +-2.41083 +11 +5.89271 +21 +-2.40857 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89271 +20 +-2.40857 +11 +5.89399 +21 +-2.40665 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89399 +20 +-2.40665 +11 +5.89591 +21 +-2.40537 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89591 +20 +-2.40537 +11 +5.89817 +21 +-2.40492 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89817 +20 +-2.40492 +11 +5.90998 +21 +-2.40492 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90998 +20 +-2.40492 +11 +5.91224 +21 +-2.40537 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91224 +20 +-2.40537 +11 +5.91416 +21 +-2.40665 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91416 +20 +-2.40665 +11 +5.91544 +21 +-2.40857 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91544 +20 +-2.40857 +11 +5.91589 +21 +-2.41083 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91589 +20 +-2.41083 +11 +5.91589 +21 +-2.43543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91589 +20 +-2.43543 +11 +5.94226 +21 +-2.43543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94226 +20 +-2.43543 +11 +5.94226 +21 +-2.41083 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94226 +20 +-2.41083 +11 +5.94271 +21 +-2.40857 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94271 +20 +-2.40857 +11 +5.94399 +21 +-2.40665 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94399 +20 +-2.40665 +11 +5.94591 +21 +-2.40537 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94591 +20 +-2.40537 +11 +5.94817 +21 +-2.40492 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94817 +20 +-2.40492 +11 +5.95998 +21 +-2.40492 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95998 +20 +-2.40492 +11 +5.96224 +21 +-2.40537 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96224 +20 +-2.40537 +11 +5.96416 +21 +-2.40665 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96416 +20 +-2.40665 +11 +5.96544 +21 +-2.40857 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96544 +20 +-2.40857 +11 +5.96589 +21 +-2.41083 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96589 +20 +-2.41083 +11 +5.96589 +21 +-2.42036 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96589 +20 +-2.42036 +11 +6.00822 +21 +-2.37803 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00822 +20 +-2.37803 +11 +6.00726 +21 +-2.37687 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00726 +20 +-2.37687 +11 +6.00363 +21 +-2.37007 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00363 +20 +-2.37007 +11 +6.00139 +21 +-2.36268 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00139 +20 +-2.36268 +11 +6.00063 +21 +-2.355 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00063 +20 +-2.355 +11 +6.00139 +21 +-2.34732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00139 +20 +-2.34732 +11 +6.00363 +21 +-2.33993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00363 +20 +-2.33993 +11 +6.00726 +21 +-2.33313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00726 +20 +-2.33313 +11 +6.01216 +21 +-2.32716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01216 +20 +-2.32716 +11 +6.01813 +21 +-2.32226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01813 +20 +-2.32226 +11 +6.02493 +21 +-2.31863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02493 +20 +-2.31863 +11 +6.03232 +21 +-2.31639 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03232 +20 +-2.31639 +11 +6.04 +21 +-2.31563 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04 +20 +-2.31563 +11 +6.04768 +21 +-2.31639 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79129 +20 +-2.12742 +11 +5.7926 +21 +-2.12757 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7926 +20 +-2.12757 +11 +5.79298 +21 +-2.12781 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79298 +20 +-2.12781 +11 +5.79342 +21 +-2.12791 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79342 +20 +-2.12791 +11 +5.79445 +21 +-2.12873 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79445 +20 +-2.12873 +11 +5.79557 +21 +-2.12943 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79557 +20 +-2.12943 +11 +5.86317 +21 +-2.19703 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86317 +20 +-2.19703 +11 +5.86387 +21 +-2.19815 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86387 +20 +-2.19815 +11 +5.86469 +21 +-2.19918 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86469 +20 +-2.19918 +11 +5.86479 +21 +-2.19962 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86479 +20 +-2.19962 +11 +5.86503 +21 +-2.2 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86503 +20 +-2.2 +11 +5.86518 +21 +-2.20131 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86518 +20 +-2.20131 +11 +5.86547 +21 +-2.2026 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86547 +20 +-2.2026 +11 +5.86547 +21 +-2.29146 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86547 +20 +-2.29146 +11 +5.86744 +21 +-2.29146 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86744 +20 +-2.29146 +11 +5.87121 +21 +-2.29221 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87121 +20 +-2.29221 +11 +5.8744 +21 +-2.29434 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8744 +20 +-2.29434 +11 +5.87653 +21 +-2.29753 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87653 +20 +-2.29753 +11 +5.87728 +21 +-2.3013 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87728 +20 +-2.3013 +11 +5.87728 +21 +-2.3387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87728 +20 +-2.3387 +11 +5.87653 +21 +-2.34247 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87653 +20 +-2.34247 +11 +5.8744 +21 +-2.34566 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8744 +20 +-2.34566 +11 +5.87121 +21 +-2.34779 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87121 +20 +-2.34779 +11 +5.86744 +21 +-2.34854 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86744 +20 +-2.34854 +11 +5.86195 +21 +-2.34854 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86195 +20 +-2.34854 +11 +5.86195 +21 +-2.40531 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86195 +20 +-2.40531 +11 +5.86224 +21 +-2.40537 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86224 +20 +-2.40537 +11 +5.86416 +21 +-2.40665 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86416 +20 +-2.40665 +11 +5.86544 +21 +-2.40857 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86544 +20 +-2.40857 +11 +5.86589 +21 +-2.41083 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86589 +20 +-2.41083 +11 +5.86589 +21 +-2.47579 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86589 +20 +-2.47579 +11 +5.86544 +21 +-2.47805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86544 +20 +-2.47805 +11 +5.86416 +21 +-2.47996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86416 +20 +-2.47996 +11 +5.86224 +21 +-2.48124 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86224 +20 +-2.48124 +11 +5.85998 +21 +-2.48169 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85998 +20 +-2.48169 +11 +5.84817 +21 +-2.48169 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84817 +20 +-2.48169 +11 +5.84591 +21 +-2.48124 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84591 +20 +-2.48124 +11 +5.84399 +21 +-2.47996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84399 +20 +-2.47996 +11 +5.84271 +21 +-2.47805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84271 +20 +-2.47805 +11 +5.84226 +21 +-2.47579 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84226 +20 +-2.47579 +11 +5.84226 +21 +-2.41083 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84226 +20 +-2.41083 +11 +5.84271 +21 +-2.40857 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84271 +20 +-2.40857 +11 +5.84399 +21 +-2.40665 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84399 +20 +-2.40665 +11 +5.84591 +21 +-2.40537 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84591 +20 +-2.40537 +11 +5.8462 +21 +-2.40531 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8462 +20 +-2.40531 +11 +5.8462 +21 +-2.34823 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8462 +20 +-2.34823 +11 +5.84399 +21 +-2.34779 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84399 +20 +-2.34779 +11 +5.8408 +21 +-2.34566 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8408 +20 +-2.34566 +11 +5.83866 +21 +-2.34247 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83866 +20 +-2.34247 +11 +5.83791 +21 +-2.3387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83791 +20 +-2.3387 +11 +5.83791 +21 +-2.3013 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83791 +20 +-2.3013 +11 +5.83866 +21 +-2.29753 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83866 +20 +-2.29753 +11 +5.8408 +21 +-2.29434 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8408 +20 +-2.29434 +11 +5.84399 +21 +-2.29221 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84399 +20 +-2.29221 +11 +5.84776 +21 +-2.29146 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84776 +20 +-2.29146 +11 +5.84972 +21 +-2.29146 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84972 +20 +-2.29146 +11 +5.84972 +21 +-2.20586 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84972 +20 +-2.20586 +11 +5.78674 +21 +-2.14287 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78674 +20 +-2.14287 +11 +5.50826 +21 +-2.14287 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50826 +20 +-2.14287 +11 +5.42649 +21 +-2.22464 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42649 +20 +-2.22464 +11 +5.42537 +21 +-2.22535 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42537 +20 +-2.22535 +11 +5.42434 +21 +-2.22617 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42434 +20 +-2.22617 +11 +5.4239 +21 +-2.22627 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4239 +20 +-2.22627 +11 +5.42353 +21 +-2.22651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42353 +20 +-2.22651 +11 +5.42221 +21 +-2.22665 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42221 +20 +-2.22665 +11 +5.42093 +21 +-2.22695 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42093 +20 +-2.22695 +11 +5.38756 +21 +-2.22695 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38756 +20 +-2.22695 +11 +5.38756 +21 +-2.22941 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38756 +20 +-2.22941 +11 +5.38681 +21 +-2.23318 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38681 +20 +-2.23318 +11 +5.38468 +21 +-2.23637 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38468 +20 +-2.23637 +11 +5.38148 +21 +-2.2385 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38148 +20 +-2.2385 +11 +5.37772 +21 +-2.23925 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37772 +20 +-2.23925 +11 +5.34228 +21 +-2.23925 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34228 +20 +-2.23925 +11 +5.33852 +21 +-2.2385 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33852 +20 +-2.2385 +11 +5.33532 +21 +-2.23637 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33532 +20 +-2.23637 +11 +5.33319 +21 +-2.23318 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33319 +20 +-2.23318 +11 +5.33244 +21 +-2.22941 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33244 +20 +-2.22941 +11 +5.33244 +21 +-2.20874 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33244 +20 +-2.20874 +11 +5.33319 +21 +-2.20497 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33319 +20 +-2.20497 +11 +5.33532 +21 +-2.20178 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33532 +20 +-2.20178 +11 +5.33852 +21 +-2.19965 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33852 +20 +-2.19965 +11 +5.34228 +21 +-2.1989 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34228 +20 +-2.1989 +11 +5.37772 +21 +-2.1989 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37772 +20 +-2.1989 +11 +5.38148 +21 +-2.19965 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38148 +20 +-2.19965 +11 +5.38468 +21 +-2.20178 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38468 +20 +-2.20178 +11 +5.38681 +21 +-2.20497 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38681 +20 +-2.20497 +11 +5.38756 +21 +-2.20874 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38756 +20 +-2.20874 +11 +5.38756 +21 +-2.2112 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38756 +20 +-2.2112 +11 +5.41766 +21 +-2.2112 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41766 +20 +-2.2112 +11 +5.49943 +21 +-2.12943 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49943 +20 +-2.12943 +11 +5.50055 +21 +-2.12873 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50055 +20 +-2.12873 +11 +5.50158 +21 +-2.12791 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50158 +20 +-2.12791 +11 +5.50202 +21 +-2.12781 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50202 +20 +-2.12781 +11 +5.5024 +21 +-2.12757 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5024 +20 +-2.12757 +11 +5.50371 +21 +-2.12742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50371 +20 +-2.12742 +11 +5.505 +21 +-2.12713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.505 +20 +-2.12713 +11 +5.79 +21 +-2.12713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79 +20 +-2.12713 +11 +5.79129 +21 +-2.12742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71768 +20 +-2.30639 +11 +5.72507 +21 +-2.30863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72507 +20 +-2.30863 +11 +5.73187 +21 +-2.31226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73187 +20 +-2.31226 +11 +5.73784 +21 +-2.31716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73784 +20 +-2.31716 +11 +5.74274 +21 +-2.32313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74274 +20 +-2.32313 +11 +5.74637 +21 +-2.32993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74637 +20 +-2.32993 +11 +5.74861 +21 +-2.33732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74861 +20 +-2.33732 +11 +5.74937 +21 +-2.345 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74937 +20 +-2.345 +11 +5.74861 +21 +-2.35268 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74861 +20 +-2.35268 +11 +5.74637 +21 +-2.36007 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74637 +20 +-2.36007 +11 +5.74274 +21 +-2.36687 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74274 +20 +-2.36687 +11 +5.73784 +21 +-2.37284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73784 +20 +-2.37284 +11 +5.73187 +21 +-2.37774 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73187 +20 +-2.37774 +11 +5.72507 +21 +-2.38137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72507 +20 +-2.38137 +11 +5.71996 +21 +-2.38292 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71996 +20 +-2.38292 +11 +5.71996 +21 +-2.41291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71996 +20 +-2.41291 +11 +5.73079 +21 +-2.41291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73079 +20 +-2.41291 +11 +5.73455 +21 +-2.41366 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73455 +20 +-2.41366 +11 +5.73775 +21 +-2.4158 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73775 +20 +-2.4158 +11 +5.73988 +21 +-2.41899 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73988 +20 +-2.41899 +11 +5.74063 +21 +-2.42276 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74063 +20 +-2.42276 +11 +5.74063 +21 +-2.43547 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74063 +20 +-2.43547 +11 +5.79226 +21 +-2.43547 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79226 +20 +-2.43547 +11 +5.79226 +21 +-2.41083 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79226 +20 +-2.41083 +11 +5.79271 +21 +-2.40857 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79271 +20 +-2.40857 +11 +5.79399 +21 +-2.40665 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79399 +20 +-2.40665 +11 +5.79591 +21 +-2.40537 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79591 +20 +-2.40537 +11 +5.79817 +21 +-2.40492 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79817 +20 +-2.40492 +11 +5.80998 +21 +-2.40492 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80998 +20 +-2.40492 +11 +5.81224 +21 +-2.40537 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81224 +20 +-2.40537 +11 +5.81416 +21 +-2.40665 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81416 +20 +-2.40665 +11 +5.81544 +21 +-2.40857 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81544 +20 +-2.40857 +11 +5.81589 +21 +-2.41083 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81589 +20 +-2.41083 +11 +5.81589 +21 +-2.47579 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81589 +20 +-2.47579 +11 +5.81544 +21 +-2.47805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81544 +20 +-2.47805 +11 +5.81416 +21 +-2.47996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81416 +20 +-2.47996 +11 +5.81224 +21 +-2.48124 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81224 +20 +-2.48124 +11 +5.80998 +21 +-2.48169 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80998 +20 +-2.48169 +11 +5.79817 +21 +-2.48169 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79817 +20 +-2.48169 +11 +5.79591 +21 +-2.48124 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79591 +20 +-2.48124 +11 +5.79399 +21 +-2.47996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79399 +20 +-2.47996 +11 +5.79271 +21 +-2.47805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79271 +20 +-2.47805 +11 +5.79226 +21 +-2.47579 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79226 +20 +-2.47579 +11 +5.79226 +21 +-2.45122 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79226 +20 +-2.45122 +11 +5.73502 +21 +-2.45122 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73502 +20 +-2.45122 +11 +5.73455 +21 +-2.45153 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73455 +20 +-2.45153 +11 +5.73079 +21 +-2.45228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73079 +20 +-2.45228 +11 +5.69339 +21 +-2.45228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.69339 +20 +-2.45228 +11 +5.68962 +21 +-2.45153 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68962 +20 +-2.45153 +11 +5.68643 +21 +-2.4494 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68643 +20 +-2.4494 +11 +5.68429 +21 +-2.44621 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68429 +20 +-2.44621 +11 +5.68354 +21 +-2.44244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68354 +20 +-2.44244 +11 +5.68354 +21 +-2.42276 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68354 +20 +-2.42276 +11 +5.68429 +21 +-2.41899 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68429 +20 +-2.41899 +11 +5.68643 +21 +-2.4158 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68643 +20 +-2.4158 +11 +5.68962 +21 +-2.41366 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68962 +20 +-2.41366 +11 +5.69339 +21 +-2.41291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.69339 +20 +-2.41291 +11 +5.70421 +21 +-2.41291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70421 +20 +-2.41291 +11 +5.70421 +21 +-2.3838 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70421 +20 +-2.3838 +11 +5.70232 +21 +-2.38361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70232 +20 +-2.38361 +11 +5.69493 +21 +-2.38137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.69493 +20 +-2.38137 +11 +5.68813 +21 +-2.37774 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68813 +20 +-2.37774 +11 +5.68216 +21 +-2.37284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68216 +20 +-2.37284 +11 +5.67726 +21 +-2.36687 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67726 +20 +-2.36687 +11 +5.67363 +21 +-2.36007 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67363 +20 +-2.36007 +11 +5.67139 +21 +-2.35268 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67139 +20 +-2.35268 +11 +5.67063 +21 +-2.345 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67063 +20 +-2.345 +11 +5.67139 +21 +-2.33732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67139 +20 +-2.33732 +11 +5.67363 +21 +-2.32993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67363 +20 +-2.32993 +11 +5.67726 +21 +-2.32313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67726 +20 +-2.32313 +11 +5.68216 +21 +-2.31716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68216 +20 +-2.31716 +11 +5.68813 +21 +-2.31226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68813 +20 +-2.31226 +11 +5.69493 +21 +-2.30863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.69493 +20 +-2.30863 +11 +5.70232 +21 +-2.30639 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70232 +20 +-2.30639 +11 +5.71 +21 +-2.30563 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71 +20 +-2.30563 +11 +5.71768 +21 +-2.30639 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38148 +20 +-2.2715 +11 +5.38468 +21 +-2.27363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38468 +20 +-2.27363 +11 +5.38681 +21 +-2.27682 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38681 +20 +-2.27682 +11 +5.38756 +21 +-2.28059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38756 +20 +-2.28059 +11 +5.38756 +21 +-2.30126 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38756 +20 +-2.30126 +11 +5.38681 +21 +-2.30503 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38681 +20 +-2.30503 +11 +5.38468 +21 +-2.30822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38468 +20 +-2.30822 +11 +5.38148 +21 +-2.31035 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38148 +20 +-2.31035 +11 +5.37772 +21 +-2.3111 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37772 +20 +-2.3111 +11 +5.36787 +21 +-2.3111 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36787 +20 +-2.3111 +11 +5.36787 +21 +-2.33482 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36787 +20 +-2.33482 +11 +5.37772 +21 +-2.33482 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37772 +20 +-2.33482 +11 +5.38148 +21 +-2.33557 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38148 +20 +-2.33557 +11 +5.38468 +21 +-2.33771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38468 +20 +-2.33771 +11 +5.38681 +21 +-2.3409 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38681 +20 +-2.3409 +11 +5.38756 +21 +-2.34467 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38756 +20 +-2.34467 +11 +5.38756 +21 +-2.36533 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38756 +20 +-2.36533 +11 +5.38681 +21 +-2.3691 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38681 +20 +-2.3691 +11 +5.38468 +21 +-2.37229 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38468 +20 +-2.37229 +11 +5.38148 +21 +-2.37443 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38148 +20 +-2.37443 +11 +5.37772 +21 +-2.37518 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37772 +20 +-2.37518 +11 +5.34228 +21 +-2.37518 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34228 +20 +-2.37518 +11 +5.33852 +21 +-2.37443 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33852 +20 +-2.37443 +11 +5.33532 +21 +-2.37229 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33532 +20 +-2.37229 +11 +5.33319 +21 +-2.3691 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33319 +20 +-2.3691 +11 +5.33244 +21 +-2.36533 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33244 +20 +-2.36533 +11 +5.33244 +21 +-2.34467 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33244 +20 +-2.34467 +11 +5.33319 +21 +-2.3409 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33319 +20 +-2.3409 +11 +5.33532 +21 +-2.33771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33532 +20 +-2.33771 +11 +5.33852 +21 +-2.33557 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33852 +20 +-2.33557 +11 +5.34228 +21 +-2.33482 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34228 +20 +-2.33482 +11 +5.35213 +21 +-2.33482 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.35213 +20 +-2.33482 +11 +5.35213 +21 +-2.3111 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.35213 +20 +-2.3111 +11 +5.34228 +21 +-2.3111 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34228 +20 +-2.3111 +11 +5.33852 +21 +-2.31035 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33852 +20 +-2.31035 +11 +5.33532 +21 +-2.30822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33532 +20 +-2.30822 +11 +5.33319 +21 +-2.30503 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33319 +20 +-2.30503 +11 +5.33244 +21 +-2.30126 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33244 +20 +-2.30126 +11 +5.33244 +21 +-2.28059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33244 +20 +-2.28059 +11 +5.33319 +21 +-2.27682 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33319 +20 +-2.27682 +11 +5.33532 +21 +-2.27363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33532 +20 +-2.27363 +11 +5.33852 +21 +-2.2715 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33852 +20 +-2.2715 +11 +5.34228 +21 +-2.27075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34228 +20 +-2.27075 +11 +5.37772 +21 +-2.27075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37772 +20 +-2.27075 +11 +5.38148 +21 +-2.2715 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98072 +20 +-2.18108 +11 +5.98597 +21 +-2.18304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98597 +20 +-2.18304 +11 +5.99045 +21 +-2.1864 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99045 +20 +-2.1864 +11 +5.99381 +21 +-2.19088 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99381 +20 +-2.19088 +11 +5.99577 +21 +-2.19613 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99577 +20 +-2.19613 +11 +5.99622 +21 +-2.20031 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99622 +20 +-2.20031 +11 +5.99622 +21 +-2.21213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99622 +20 +-2.21213 +11 +6.0289 +21 +-2.21213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0289 +20 +-2.21213 +11 +6.0289 +21 +-2.20228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0289 +20 +-2.20228 +11 +6.02965 +21 +-2.19852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02965 +20 +-2.19852 +11 +6.03178 +21 +-2.19532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03178 +20 +-2.19532 +11 +6.03497 +21 +-2.19319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03497 +20 +-2.19319 +11 +6.03874 +21 +-2.19244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03874 +20 +-2.19244 +11 +6.05941 +21 +-2.19244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05941 +20 +-2.19244 +11 +6.06318 +21 +-2.19319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06318 +20 +-2.19319 +11 +6.06637 +21 +-2.19532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06637 +20 +-2.19532 +11 +6.0685 +21 +-2.19852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0685 +20 +-2.19852 +11 +6.06925 +21 +-2.20228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06925 +20 +-2.20228 +11 +6.06925 +21 +-2.23772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06925 +20 +-2.23772 +11 +6.0685 +21 +-2.24148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0685 +20 +-2.24148 +11 +6.06637 +21 +-2.24468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06637 +20 +-2.24468 +11 +6.06318 +21 +-2.24681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06318 +20 +-2.24681 +11 +6.05941 +21 +-2.24756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05941 +20 +-2.24756 +11 +6.03874 +21 +-2.24756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03874 +20 +-2.24756 +11 +6.03497 +21 +-2.24681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03497 +20 +-2.24681 +11 +6.03178 +21 +-2.24468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03178 +20 +-2.24468 +11 +6.02965 +21 +-2.24148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02965 +20 +-2.24148 +11 +6.0289 +21 +-2.23772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0289 +20 +-2.23772 +11 +6.0289 +21 +-2.22787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0289 +20 +-2.22787 +11 +5.99622 +21 +-2.22787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99622 +20 +-2.22787 +11 +5.99622 +21 +-2.23969 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99622 +20 +-2.23969 +11 +5.99577 +21 +-2.24387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99577 +20 +-2.24387 +11 +5.99381 +21 +-2.24912 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99381 +20 +-2.24912 +11 +5.99045 +21 +-2.2536 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99045 +20 +-2.2536 +11 +5.98597 +21 +-2.25696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98597 +20 +-2.25696 +11 +5.98072 +21 +-2.25892 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98072 +20 +-2.25892 +11 +5.97654 +21 +-2.25937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97654 +20 +-2.25937 +11 +5.94028 +21 +-2.25937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94028 +20 +-2.25937 +11 +5.94028 +21 +-2.29146 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94028 +20 +-2.29146 +11 +5.94224 +21 +-2.29146 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94224 +20 +-2.29146 +11 +5.94601 +21 +-2.29221 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94601 +20 +-2.29221 +11 +5.9492 +21 +-2.29434 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9492 +20 +-2.29434 +11 +5.95134 +21 +-2.29753 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95134 +20 +-2.29753 +11 +5.95209 +21 +-2.3013 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95209 +20 +-2.3013 +11 +5.95209 +21 +-2.3387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95209 +20 +-2.3387 +11 +5.95134 +21 +-2.34247 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95134 +20 +-2.34247 +11 +5.9492 +21 +-2.34566 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9492 +20 +-2.34566 +11 +5.94601 +21 +-2.34779 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94601 +20 +-2.34779 +11 +5.94224 +21 +-2.34854 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94224 +20 +-2.34854 +11 +5.92256 +21 +-2.34854 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92256 +20 +-2.34854 +11 +5.91879 +21 +-2.34779 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91879 +20 +-2.34779 +11 +5.9156 +21 +-2.34566 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9156 +20 +-2.34566 +11 +5.91347 +21 +-2.34247 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91347 +20 +-2.34247 +11 +5.91272 +21 +-2.3387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91272 +20 +-2.3387 +11 +5.91272 +21 +-2.3013 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91272 +20 +-2.3013 +11 +5.91347 +21 +-2.29753 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91347 +20 +-2.29753 +11 +5.9156 +21 +-2.29434 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9156 +20 +-2.29434 +11 +5.91879 +21 +-2.29221 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91879 +20 +-2.29221 +11 +5.92256 +21 +-2.29146 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92256 +20 +-2.29146 +11 +5.92453 +21 +-2.29146 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92453 +20 +-2.29146 +11 +5.92453 +21 +-2.25456 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92453 +20 +-2.25456 +11 +5.92325 +21 +-2.2536 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92325 +20 +-2.2536 +11 +5.91989 +21 +-2.24912 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91989 +20 +-2.24912 +11 +5.91793 +21 +-2.24387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91793 +20 +-2.24387 +11 +5.91748 +21 +-2.23969 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91748 +20 +-2.23969 +11 +5.91748 +21 +-2.20031 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91748 +20 +-2.20031 +11 +5.91793 +21 +-2.19613 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91793 +20 +-2.19613 +11 +5.91989 +21 +-2.19088 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91989 +20 +-2.19088 +11 +5.92325 +21 +-2.1864 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92325 +20 +-2.1864 +11 +5.92773 +21 +-2.18304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92773 +20 +-2.18304 +11 +5.93298 +21 +-2.18108 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93298 +20 +-2.18108 +11 +5.93717 +21 +-2.18063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93717 +20 +-2.18063 +11 +5.97654 +21 +-2.18063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97654 +20 +-2.18063 +11 +5.98072 +21 +-2.18108 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23768 +20 +-2.18139 +11 +6.24507 +21 +-2.18363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24507 +20 +-2.18363 +11 +6.25187 +21 +-2.18726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25187 +20 +-2.18726 +11 +6.25784 +21 +-2.19216 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25784 +20 +-2.19216 +11 +6.26274 +21 +-2.19813 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26274 +20 +-2.19813 +11 +6.26637 +21 +-2.20493 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26637 +20 +-2.20493 +11 +6.26861 +21 +-2.21232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26861 +20 +-2.21232 +11 +6.26937 +21 +-2.22 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26937 +20 +-2.22 +11 +6.26861 +21 +-2.22768 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26861 +20 +-2.22768 +11 +6.26637 +21 +-2.23507 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26637 +20 +-2.23507 +11 +6.26274 +21 +-2.24187 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26274 +20 +-2.24187 +11 +6.25784 +21 +-2.24784 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25784 +20 +-2.24784 +11 +6.25187 +21 +-2.25274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25187 +20 +-2.25274 +11 +6.24507 +21 +-2.25637 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24507 +20 +-2.25637 +11 +6.23768 +21 +-2.25861 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23768 +20 +-2.25861 +11 +6.23 +21 +-2.25937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23 +20 +-2.25937 +11 +6.22232 +21 +-2.25861 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22232 +20 +-2.25861 +11 +6.21493 +21 +-2.25637 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21493 +20 +-2.25637 +11 +6.20813 +21 +-2.25274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20813 +20 +-2.25274 +11 +6.20216 +21 +-2.24784 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20216 +20 +-2.24784 +11 +6.19726 +21 +-2.24187 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19726 +20 +-2.24187 +11 +6.19363 +21 +-2.23507 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19363 +20 +-2.23507 +11 +6.19145 +21 +-2.22787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19145 +20 +-2.22787 +11 +6.1411 +21 +-2.22787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1411 +20 +-2.22787 +11 +6.1411 +21 +-2.23772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1411 +20 +-2.23772 +11 +6.14035 +21 +-2.24148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14035 +20 +-2.24148 +11 +6.13822 +21 +-2.24468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13822 +20 +-2.24468 +11 +6.13503 +21 +-2.24681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13503 +20 +-2.24681 +11 +6.13126 +21 +-2.24756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13126 +20 +-2.24756 +11 +6.11059 +21 +-2.24756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11059 +20 +-2.24756 +11 +6.10682 +21 +-2.24681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10682 +20 +-2.24681 +11 +6.10363 +21 +-2.24468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10363 +20 +-2.24468 +11 +6.1015 +21 +-2.24148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1015 +20 +-2.24148 +11 +6.10075 +21 +-2.23772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10075 +20 +-2.23772 +11 +6.10075 +21 +-2.20228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10075 +20 +-2.20228 +11 +6.1015 +21 +-2.19852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1015 +20 +-2.19852 +11 +6.10363 +21 +-2.19532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10363 +20 +-2.19532 +11 +6.10682 +21 +-2.19319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10682 +20 +-2.19319 +11 +6.11059 +21 +-2.19244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11059 +20 +-2.19244 +11 +6.13126 +21 +-2.19244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13126 +20 +-2.19244 +11 +6.13503 +21 +-2.19319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13503 +20 +-2.19319 +11 +6.13822 +21 +-2.19532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13822 +20 +-2.19532 +11 +6.14035 +21 +-2.19852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14035 +20 +-2.19852 +11 +6.1411 +21 +-2.20228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1411 +20 +-2.20228 +11 +6.1411 +21 +-2.21213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1411 +20 +-2.21213 +11 +6.19145 +21 +-2.21213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19145 +20 +-2.21213 +11 +6.19363 +21 +-2.20493 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19363 +20 +-2.20493 +11 +6.19726 +21 +-2.19813 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19726 +20 +-2.19813 +11 +6.20216 +21 +-2.19216 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20216 +20 +-2.19216 +11 +6.20813 +21 +-2.18726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20813 +20 +-2.18726 +11 +6.21493 +21 +-2.18363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21493 +20 +-2.18363 +11 +6.22232 +21 +-2.18139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22232 +20 +-2.18139 +11 +6.23 +21 +-2.18063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23 +20 +-2.18063 +11 +6.23768 +21 +-2.18139 +0 +CIRCLE +8 +BLACK +10 +6.23 +20 +-2.22 +40 +0.019685 +0 +CIRCLE +8 +BLACK +10 +6.405 +20 +-2.285 +40 +0.019685 +0 +CIRCLE +8 +BLACK +10 +5.92093 +20 +-2.825 +40 +0.019685 +0 +CIRCLE +8 +BLACK +10 +5.97 +20 +-4.21 +40 +0.019685 +0 +CIRCLE +8 +BLACK +10 +5.66 +20 +-4.265 +40 +0.019685 +0 +CIRCLE +8 +BLACK +10 +6.04 +20 +-2.355 +40 +0.019685 +0 +CIRCLE +8 +BLACK +10 +6.09537 +20 +-2.67037 +40 +0.019685 +0 +CIRCLE +8 +BLACK +10 +6.43 +20 +-4.295 +40 +0.019685 +0 +CIRCLE +8 +BLACK +10 +6.05 +20 +-3.06 +40 +0.019685 +0 +CIRCLE +8 +BLACK +10 +6.43 +20 +-4.095 +40 +0.019685 +0 +CIRCLE +8 +BLACK +10 +5.825 +20 +-3.08 +40 +0.019685 +0 +CIRCLE +8 +BLACK +10 +5.71 +20 +-2.345 +40 +0.019685 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.76443 +20 +-1.89161 +11 +6.7726 +21 +-1.89225 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.7726 +20 +-1.89225 +11 +6.78057 +21 +-1.89417 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.78057 +20 +-1.89417 +11 +6.78814 +21 +-1.8973 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.78814 +20 +-1.8973 +11 +6.79512 +21 +-1.90158 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.79512 +20 +-1.90158 +11 +6.80135 +21 +-1.9069 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.80135 +20 +-1.9069 +11 +6.80667 +21 +-1.91313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.80667 +20 +-1.91313 +11 +6.81096 +21 +-1.92012 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81096 +20 +-1.92012 +11 +6.81409 +21 +-1.92769 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81409 +20 +-1.92769 +11 +6.816 +21 +-1.93566 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.816 +20 +-1.93566 +11 +6.81665 +21 +-1.94383 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81665 +20 +-1.94383 +11 +6.81665 +21 +-1.94383 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81665 +20 +-1.94383 +11 +6.81663 +21 +-1.94387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81663 +20 +-1.94387 +11 +6.81665 +21 +-1.94391 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81665 +20 +-1.94391 +11 +6.68447 +21 +-5.12373 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68447 +20 +-5.12373 +11 +6.68417 +21 +-5.12438 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68417 +20 +-5.12438 +11 +6.6839 +21 +-5.12504 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6839 +20 +-5.12504 +11 +6.68386 +21 +-5.12506 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68386 +20 +-5.12506 +11 +6.68384 +21 +-5.1251 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68384 +20 +-5.1251 +11 +6.68317 +21 +-5.12534 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68317 +20 +-5.12534 +11 +6.6825 +21 +-5.12562 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6825 +20 +-5.12562 +11 +6.67888 +21 +-5.12562 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67888 +20 +-5.12562 +11 +6.67888 +21 +-5.12562 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67888 +20 +-5.12562 +11 +6.67246 +21 +-5.12562 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67246 +20 +-5.12562 +11 +6.65969 +21 +-5.12706 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65969 +20 +-5.12706 +11 +6.64716 +21 +-5.12992 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64716 +20 +-5.12992 +11 +6.63503 +21 +-5.13416 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63503 +20 +-5.13416 +11 +6.62345 +21 +-5.13974 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62345 +20 +-5.13974 +11 +6.61257 +21 +-5.14657 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61257 +20 +-5.14657 +11 +6.60252 +21 +-5.15459 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60252 +20 +-5.15459 +11 +6.59343 +21 +-5.16367 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59343 +20 +-5.16367 +11 +6.58542 +21 +-5.17372 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58542 +20 +-5.17372 +11 +6.57858 +21 +-5.1846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57858 +20 +-5.1846 +11 +6.57301 +21 +-5.19618 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57301 +20 +-5.19618 +11 +6.56876 +21 +-5.20831 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56876 +20 +-5.20831 +11 +6.5659 +21 +-5.22084 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5659 +20 +-5.22084 +11 +6.56446 +21 +-5.23361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56446 +20 +-5.23361 +11 +6.56446 +21 +-5.24003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56446 +20 +-5.24003 +11 +6.56446 +21 +-5.24003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56446 +20 +-5.24003 +11 +6.56446 +21 +-5.24003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56446 +20 +-5.24003 +11 +6.56446 +21 +-5.24004 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56446 +20 +-5.24004 +11 +6.56409 +21 +-5.24119 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56409 +20 +-5.24119 +11 +6.56394 +21 +-5.2413 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56394 +20 +-5.2413 +11 +6.56389 +21 +-5.24143 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56389 +20 +-5.24143 +11 +6.5636 +21 +-5.24154 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5636 +20 +-5.24154 +11 +6.5631 +21 +-5.24191 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5631 +20 +-5.24191 +11 +6.56273 +21 +-5.24191 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56273 +20 +-5.24191 +11 +6.5625 +21 +-5.242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5625 +20 +-5.242 +11 +5.4575 +21 +-5.24193 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4575 +20 +-5.24193 +11 +5.45727 +21 +-5.24184 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45727 +20 +-5.24184 +11 +5.4569 +21 +-5.24184 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4569 +20 +-5.24184 +11 +5.4564 +21 +-5.24148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4564 +20 +-5.24148 +11 +5.45611 +21 +-5.24136 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45611 +20 +-5.24136 +11 +5.45606 +21 +-5.24123 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45606 +20 +-5.24123 +11 +5.45591 +21 +-5.24112 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45591 +20 +-5.24112 +11 +5.45554 +21 +-5.23997 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45554 +20 +-5.23997 +11 +5.45554 +21 +-5.23997 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45554 +20 +-5.23997 +11 +5.45554 +21 +-5.23997 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45554 +20 +-5.23997 +11 +5.45554 +21 +-5.23996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45554 +20 +-5.23996 +11 +5.45554 +21 +-5.23354 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45554 +20 +-5.23354 +11 +5.4541 +21 +-5.22077 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4541 +20 +-5.22077 +11 +5.45124 +21 +-5.20824 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45124 +20 +-5.20824 +11 +5.44699 +21 +-5.19611 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44699 +20 +-5.19611 +11 +5.44142 +21 +-5.18453 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44142 +20 +-5.18453 +11 +5.43458 +21 +-5.17365 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43458 +20 +-5.17365 +11 +5.42657 +21 +-5.1636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42657 +20 +-5.1636 +11 +5.41748 +21 +-5.15452 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41748 +20 +-5.15452 +11 +5.40743 +21 +-5.1465 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40743 +20 +-5.1465 +11 +5.39655 +21 +-5.13967 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39655 +20 +-5.13967 +11 +5.38497 +21 +-5.13409 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38497 +20 +-5.13409 +11 +5.37284 +21 +-5.12985 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37284 +20 +-5.12985 +11 +5.36031 +21 +-5.12699 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36031 +20 +-5.12699 +11 +5.34754 +21 +-5.12555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34754 +20 +-5.12555 +11 +5.34112 +21 +-5.12555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34112 +20 +-5.12555 +11 +5.3375 +21 +-5.12555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3375 +20 +-5.12555 +11 +5.33683 +21 +-5.12527 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33683 +20 +-5.12527 +11 +5.33616 +21 +-5.12503 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33616 +20 +-5.12503 +11 +5.33614 +21 +-5.12499 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33614 +20 +-5.12499 +11 +5.3361 +21 +-5.12497 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3361 +20 +-5.12497 +11 +5.33583 +21 +-5.12431 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33583 +20 +-5.12431 +11 +5.33553 +21 +-5.12366 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33553 +20 +-5.12366 +11 +5.20252 +21 +-1.94391 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20252 +20 +-1.94391 +11 +5.20253 +21 +-1.94387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20253 +20 +-1.94387 +11 +5.20252 +21 +-1.94383 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20252 +20 +-1.94383 +11 +5.20316 +21 +-1.93566 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20316 +20 +-1.93566 +11 +5.20507 +21 +-1.92769 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20507 +20 +-1.92769 +11 +5.20821 +21 +-1.92012 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20821 +20 +-1.92012 +11 +5.21249 +21 +-1.91313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.21249 +20 +-1.91313 +11 +5.21781 +21 +-1.9069 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.21781 +20 +-1.9069 +11 +5.22404 +21 +-1.90158 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.22404 +20 +-1.90158 +11 +5.23103 +21 +-1.8973 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.23103 +20 +-1.8973 +11 +5.2386 +21 +-1.89417 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.2386 +20 +-1.89417 +11 +5.24656 +21 +-1.89225 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.24656 +20 +-1.89225 +11 +5.25473 +21 +-1.89161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25473 +20 +-1.89161 +11 +5.25473 +21 +-1.89161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25473 +20 +-1.89161 +11 +6.76443 +21 +-1.89161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25473 +20 +-1.89555 +11 +5.25473 +21 +-1.89555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25473 +20 +-1.89555 +11 +5.25093 +21 +-1.89555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25093 +20 +-1.89555 +11 +5.24343 +21 +-1.89674 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.24343 +20 +-1.89674 +11 +5.2362 +21 +-1.89908 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.2362 +20 +-1.89908 +11 +5.22943 +21 +-1.90253 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.22943 +20 +-1.90253 +11 +5.22328 +21 +-1.907 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.22328 +20 +-1.907 +11 +5.21791 +21 +-1.91237 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.21791 +20 +-1.91237 +11 +5.21344 +21 +-1.91852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.21344 +20 +-1.91852 +11 +5.20999 +21 +-1.92529 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20999 +20 +-1.92529 +11 +5.20764 +21 +-1.93252 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20764 +20 +-1.93252 +11 +5.20645 +21 +-1.94003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20645 +20 +-1.94003 +11 +5.20645 +21 +-1.94379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20645 +20 +-1.94379 +11 +5.33938 +21 +-5.12161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33938 +20 +-5.12161 +11 +5.34112 +21 +-5.12161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34112 +20 +-5.12161 +11 +5.35349 +21 +-5.12226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.35349 +20 +-5.12226 +11 +5.36573 +21 +-5.1242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36573 +20 +-5.1242 +11 +5.37769 +21 +-5.1274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37769 +20 +-5.1274 +11 +5.38926 +21 +-5.13184 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38926 +20 +-5.13184 +11 +5.4003 +21 +-5.13747 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4003 +20 +-5.13747 +11 +5.41069 +21 +-5.14421 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41069 +20 +-5.14421 +11 +5.42031 +21 +-5.15201 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42031 +20 +-5.15201 +11 +5.42907 +21 +-5.16077 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42907 +20 +-5.16077 +11 +5.43687 +21 +-5.1704 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43687 +20 +-5.1704 +11 +5.44362 +21 +-5.18079 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44362 +20 +-5.18079 +11 +5.44924 +21 +-5.19183 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44924 +20 +-5.19183 +11 +5.45368 +21 +-5.20339 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45368 +20 +-5.20339 +11 +5.45689 +21 +-5.21536 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45689 +20 +-5.21536 +11 +5.45882 +21 +-5.22759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45882 +20 +-5.22759 +11 +5.45937 +21 +-5.238 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45937 +20 +-5.238 +11 +6.56063 +21 +-5.23807 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56063 +20 +-5.23807 +11 +6.56118 +21 +-5.22766 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56118 +20 +-5.22766 +11 +6.56311 +21 +-5.21543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56311 +20 +-5.21543 +11 +6.56632 +21 +-5.20346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56632 +20 +-5.20346 +11 +6.57076 +21 +-5.1919 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57076 +20 +-5.1919 +11 +6.57638 +21 +-5.18086 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57638 +20 +-5.18086 +11 +6.58313 +21 +-5.17047 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58313 +20 +-5.17047 +11 +6.59093 +21 +-5.16084 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59093 +20 +-5.16084 +11 +6.59969 +21 +-5.15208 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59969 +20 +-5.15208 +11 +6.60932 +21 +-5.14428 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60932 +20 +-5.14428 +11 +6.6197 +21 +-5.13754 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6197 +20 +-5.13754 +11 +6.63074 +21 +-5.13191 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63074 +20 +-5.13191 +11 +6.64231 +21 +-5.12747 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64231 +20 +-5.12747 +11 +6.65428 +21 +-5.12427 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65428 +20 +-5.12427 +11 +6.66651 +21 +-5.12233 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66651 +20 +-5.12233 +11 +6.67888 +21 +-5.12168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67888 +20 +-5.12168 +11 +6.67888 +21 +-5.12168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67888 +20 +-5.12168 +11 +6.68062 +21 +-5.12168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68062 +20 +-5.12168 +11 +6.81271 +21 +-1.9438 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81271 +20 +-1.9438 +11 +6.81271 +21 +-1.94003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81271 +20 +-1.94003 +11 +6.81152 +21 +-1.93252 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81152 +20 +-1.93252 +11 +6.80917 +21 +-1.92529 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.80917 +20 +-1.92529 +11 +6.80572 +21 +-1.91852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.80572 +20 +-1.91852 +11 +6.80126 +21 +-1.91237 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.80126 +20 +-1.91237 +11 +6.79588 +21 +-1.907 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.79588 +20 +-1.907 +11 +6.78973 +21 +-1.90253 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.78973 +20 +-1.90253 +11 +6.78296 +21 +-1.89908 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.78296 +20 +-1.89908 +11 +6.77573 +21 +-1.89674 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.77573 +20 +-1.89674 +11 +6.76823 +21 +-1.89555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.76823 +20 +-1.89555 +11 +6.76443 +21 +-1.89555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.76443 +20 +-1.89555 +11 +5.25473 +21 +-1.89555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25473 +20 +-1.89555 +11 +5.25473 +21 +-1.89555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25473 +20 +-1.89555 +11 +5.25473 +21 +-1.89555 + 0 +ENDSEC + 0 +EOF diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/DXF/StudioMic-F_Mask.dxf b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/DXF/StudioMic-F_Mask.dxf new file mode 100755 index 0000000..6888455 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/DXF/StudioMic-F_Mask.dxf @@ -0,0 +1,39600 @@ + 0 +SECTION + 2 +HEADER + 9 +$ANGBASE + 50 +0.0 + 9 +$ANGDIR + 70 +1 + 9 +$MEASUREMENT + 70 +0 + 0 +ENDSEC + 0 +SECTION + 2 +TABLES + 0 +TABLE + 2 +LTYPE + 70 +4 + 0 +LTYPE + 5 +40F + 2 +CONTINUOUS + 70 +0 + 3 +Solid line + 72 +65 + 73 +0 + 40 +0.0 + 0 +LTYPE + 5 +410 + 2 +DASHDOT + 70 +0 + 3 +Dash Dot ____ _ ____ _ + 72 +65 + 73 +4 + 40 +2.0 + 49 +1.25 + 49 +-0.25 + 49 +0.25 + 49 +-0.25 + 0 +LTYPE + 5 +411 + 2 +DASHED + 70 +0 + 3 +Dashed __ __ __ __ __ + 72 +65 + 73 +2 + 40 +0.75 + 49 +0.5 + 49 +-0.25 + 0 +LTYPE + 5 +43B + 2 +DOTTED + 70 +0 + 3 +Dotted . . . . + 72 +65 + 73 +2 + 40 +0.2 + 49 +0.0 + 49 +-0.2 + 0 +ENDTAB + 0 +TABLE + 2 +STYLE + 70 +4 + 0 +STYLE + 2 +KICAD + 70 +0 + 40 +0 + 41 +1 + 42 +1 + 50 +0 + 71 +0 + 3 +isocp.shx + 0 +STYLE + 2 +KICADB + 70 +0 + 40 +0 + 41 +1 + 42 +1 + 50 +0 + 71 +0 + 3 +isocp.shx + 0 +STYLE + 2 +KICADI + 70 +0 + 40 +0 + 41 +1 + 42 +1 + 50 +15 + 71 +0 + 3 +isocp.shx + 0 +STYLE + 2 +KICADBI + 70 +0 + 40 +0 + 41 +1 + 42 +1 + 50 +15 + 71 +0 + 3 +isocp.shx + 0 +ENDTAB + 0 +TABLE + 2 +LAYER + 70 +1 + 0 +LAYER + 2 +BLACK + 70 +0 + 62 +7 + 6 +CONTINUOUS + 0 +ENDTAB + 0 +ENDSEC + 0 +SECTION + 2 +ENTITIES +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22979 +20 +-4.82108 +11 +6.23504 +21 +-4.82304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23504 +20 +-4.82304 +11 +6.23953 +21 +-4.8264 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23953 +20 +-4.8264 +11 +6.24289 +21 +-4.83088 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24289 +20 +-4.83088 +11 +6.24485 +21 +-4.83613 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24485 +20 +-4.83613 +11 +6.2453 +21 +-4.84031 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2453 +20 +-4.84031 +11 +6.2453 +21 +-4.87969 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2453 +20 +-4.87969 +11 +6.24485 +21 +-4.88387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24485 +20 +-4.88387 +11 +6.24289 +21 +-4.88912 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24289 +20 +-4.88912 +11 +6.23953 +21 +-4.8936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23953 +20 +-4.8936 +11 +6.23504 +21 +-4.89696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23504 +20 +-4.89696 +11 +6.22979 +21 +-4.89892 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22979 +20 +-4.89892 +11 +6.22561 +21 +-4.89937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22561 +20 +-4.89937 +11 +6.18624 +21 +-4.89937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18624 +20 +-4.89937 +11 +6.18206 +21 +-4.89892 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18206 +20 +-4.89892 +11 +6.17681 +21 +-4.89696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17681 +20 +-4.89696 +11 +6.17232 +21 +-4.8936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17232 +20 +-4.8936 +11 +6.16896 +21 +-4.88912 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16896 +20 +-4.88912 +11 +6.167 +21 +-4.88387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.167 +20 +-4.88387 +11 +6.16656 +21 +-4.87969 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16656 +20 +-4.87969 +11 +6.16656 +21 +-4.84031 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16656 +20 +-4.84031 +11 +6.167 +21 +-4.83613 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.167 +20 +-4.83613 +11 +6.16896 +21 +-4.83088 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16896 +20 +-4.83088 +11 +6.17232 +21 +-4.8264 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17232 +20 +-4.8264 +11 +6.17681 +21 +-4.82304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17681 +20 +-4.82304 +11 +6.18206 +21 +-4.82108 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18206 +20 +-4.82108 +11 +6.18624 +21 +-4.82063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18624 +20 +-4.82063 +11 +6.22561 +21 +-4.82063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22561 +20 +-4.82063 +11 +6.22979 +21 +-4.82108 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03294 +20 +-4.82108 +11 +6.03819 +21 +-4.82304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03819 +20 +-4.82304 +11 +6.04268 +21 +-4.8264 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04268 +20 +-4.8264 +11 +6.04604 +21 +-4.83088 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04604 +20 +-4.83088 +11 +6.048 +21 +-4.83613 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.048 +20 +-4.83613 +11 +6.04844 +21 +-4.84031 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04844 +20 +-4.84031 +11 +6.04844 +21 +-4.87969 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04844 +20 +-4.87969 +11 +6.048 +21 +-4.88387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.048 +20 +-4.88387 +11 +6.04604 +21 +-4.88912 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04604 +20 +-4.88912 +11 +6.04268 +21 +-4.8936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04268 +20 +-4.8936 +11 +6.03819 +21 +-4.89696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03819 +20 +-4.89696 +11 +6.03294 +21 +-4.89892 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03294 +20 +-4.89892 +11 +6.02876 +21 +-4.89937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02876 +20 +-4.89937 +11 +5.98939 +21 +-4.89937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98939 +20 +-4.89937 +11 +5.98521 +21 +-4.89892 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98521 +20 +-4.89892 +11 +5.97996 +21 +-4.89696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97996 +20 +-4.89696 +11 +5.97547 +21 +-4.8936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97547 +20 +-4.8936 +11 +5.97211 +21 +-4.88912 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97211 +20 +-4.88912 +11 +5.97015 +21 +-4.88387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97015 +20 +-4.88387 +11 +5.9697 +21 +-4.87969 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9697 +20 +-4.87969 +11 +5.9697 +21 +-4.84031 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9697 +20 +-4.84031 +11 +5.97015 +21 +-4.83613 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97015 +20 +-4.83613 +11 +5.97211 +21 +-4.83088 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97211 +20 +-4.83088 +11 +5.97547 +21 +-4.8264 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97547 +20 +-4.8264 +11 +5.97996 +21 +-4.82304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97996 +20 +-4.82304 +11 +5.98521 +21 +-4.82108 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98521 +20 +-4.82108 +11 +5.98939 +21 +-4.82063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98939 +20 +-4.82063 +11 +6.02876 +21 +-4.82063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02876 +20 +-4.82063 +11 +6.03294 +21 +-4.82108 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83609 +20 +-4.82108 +11 +5.84134 +21 +-4.82304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84134 +20 +-4.82304 +11 +5.84583 +21 +-4.8264 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84583 +20 +-4.8264 +11 +5.84919 +21 +-4.83088 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84919 +20 +-4.83088 +11 +5.85114 +21 +-4.83613 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85114 +20 +-4.83613 +11 +5.85159 +21 +-4.84031 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85159 +20 +-4.84031 +11 +5.85159 +21 +-4.87969 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85159 +20 +-4.87969 +11 +5.85114 +21 +-4.88387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85114 +20 +-4.88387 +11 +5.84919 +21 +-4.88912 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84919 +20 +-4.88912 +11 +5.84583 +21 +-4.8936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84583 +20 +-4.8936 +11 +5.84134 +21 +-4.89696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84134 +20 +-4.89696 +11 +5.83609 +21 +-4.89892 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83609 +20 +-4.89892 +11 +5.83191 +21 +-4.89937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83191 +20 +-4.89937 +11 +5.79254 +21 +-4.89937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79254 +20 +-4.89937 +11 +5.78836 +21 +-4.89892 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78836 +20 +-4.89892 +11 +5.78311 +21 +-4.89696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78311 +20 +-4.89696 +11 +5.77862 +21 +-4.8936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77862 +20 +-4.8936 +11 +5.77526 +21 +-4.88912 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77526 +20 +-4.88912 +11 +5.7733 +21 +-4.88387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7733 +20 +-4.88387 +11 +5.77285 +21 +-4.87969 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77285 +20 +-4.87969 +11 +5.77285 +21 +-4.84031 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77285 +20 +-4.84031 +11 +5.7733 +21 +-4.83613 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7733 +20 +-4.83613 +11 +5.77526 +21 +-4.83088 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77526 +20 +-4.83088 +11 +5.77862 +21 +-4.8264 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77862 +20 +-4.8264 +11 +5.78311 +21 +-4.82304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78311 +20 +-4.82304 +11 +5.78836 +21 +-4.82108 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78836 +20 +-4.82108 +11 +5.79254 +21 +-4.82063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79254 +20 +-4.82063 +11 +5.83191 +21 +-4.82063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83191 +20 +-4.82063 +11 +5.83609 +21 +-4.82108 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24056 +20 +-4.75557 +11 +6.24375 +21 +-4.75771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24375 +20 +-4.75771 +11 +6.24588 +21 +-4.7609 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24588 +20 +-4.7609 +11 +6.24663 +21 +-4.76467 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24663 +20 +-4.76467 +11 +6.24663 +21 +-4.78533 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24663 +20 +-4.78533 +11 +6.24588 +21 +-4.7891 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24588 +20 +-4.7891 +11 +6.24375 +21 +-4.79229 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24375 +20 +-4.79229 +11 +6.24056 +21 +-4.79443 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24056 +20 +-4.79443 +11 +6.23679 +21 +-4.79518 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23679 +20 +-4.79518 +11 +6.20136 +21 +-4.79518 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20136 +20 +-4.79518 +11 +6.19759 +21 +-4.79443 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19759 +20 +-4.79443 +11 +6.1944 +21 +-4.79229 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1944 +20 +-4.79229 +11 +6.19226 +21 +-4.7891 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19226 +20 +-4.7891 +11 +6.19152 +21 +-4.78533 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19152 +20 +-4.78533 +11 +6.19152 +21 +-4.76467 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19152 +20 +-4.76467 +11 +6.19226 +21 +-4.7609 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19226 +20 +-4.7609 +11 +6.1944 +21 +-4.75771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1944 +20 +-4.75771 +11 +6.19759 +21 +-4.75557 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19759 +20 +-4.75557 +11 +6.20136 +21 +-4.75482 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20136 +20 +-4.75482 +11 +6.23679 +21 +-4.75482 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23679 +20 +-4.75482 +11 +6.24056 +21 +-4.75557 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03056 +20 +-4.75557 +11 +6.03375 +21 +-4.75771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03375 +20 +-4.75771 +11 +6.03588 +21 +-4.7609 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03588 +20 +-4.7609 +11 +6.03663 +21 +-4.76467 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03663 +20 +-4.76467 +11 +6.03663 +21 +-4.78533 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03663 +20 +-4.78533 +11 +6.03588 +21 +-4.7891 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03588 +20 +-4.7891 +11 +6.03375 +21 +-4.79229 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03375 +20 +-4.79229 +11 +6.03056 +21 +-4.79443 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03056 +20 +-4.79443 +11 +6.02679 +21 +-4.79518 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02679 +20 +-4.79518 +11 +5.99136 +21 +-4.79518 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99136 +20 +-4.79518 +11 +5.98759 +21 +-4.79443 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98759 +20 +-4.79443 +11 +5.9844 +21 +-4.79229 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9844 +20 +-4.79229 +11 +5.98226 +21 +-4.7891 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98226 +20 +-4.7891 +11 +5.98152 +21 +-4.78533 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98152 +20 +-4.78533 +11 +5.98152 +21 +-4.76467 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98152 +20 +-4.76467 +11 +5.98226 +21 +-4.7609 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98226 +20 +-4.7609 +11 +5.9844 +21 +-4.75771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9844 +20 +-4.75771 +11 +5.98759 +21 +-4.75557 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98759 +20 +-4.75557 +11 +5.99136 +21 +-4.75482 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99136 +20 +-4.75482 +11 +6.02679 +21 +-4.75482 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02679 +20 +-4.75482 +11 +6.03056 +21 +-4.75557 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4441 +20 +-4.71319 +11 +6.44729 +21 +-4.71532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44729 +20 +-4.71532 +11 +6.44943 +21 +-4.71852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44943 +20 +-4.71852 +11 +6.45018 +21 +-4.72228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45018 +20 +-4.72228 +11 +6.45018 +21 +-4.75772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45018 +20 +-4.75772 +11 +6.44943 +21 +-4.76148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44943 +20 +-4.76148 +11 +6.44729 +21 +-4.76468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44729 +20 +-4.76468 +11 +6.4441 +21 +-4.76681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4441 +20 +-4.76681 +11 +6.44033 +21 +-4.76756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44033 +20 +-4.76756 +11 +6.41967 +21 +-4.76756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41967 +20 +-4.76756 +11 +6.4159 +21 +-4.76681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4159 +20 +-4.76681 +11 +6.41271 +21 +-4.76468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41271 +20 +-4.76468 +11 +6.41057 +21 +-4.76148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41057 +20 +-4.76148 +11 +6.40982 +21 +-4.75772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40982 +20 +-4.75772 +11 +6.40982 +21 +-4.72228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40982 +20 +-4.72228 +11 +6.41057 +21 +-4.71852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41057 +20 +-4.71852 +11 +6.41271 +21 +-4.71532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41271 +20 +-4.71532 +11 +6.4159 +21 +-4.71319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4159 +20 +-4.71319 +11 +6.41967 +21 +-4.71244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41967 +20 +-4.71244 +11 +6.44033 +21 +-4.71244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44033 +20 +-4.71244 +11 +6.4441 +21 +-4.71319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37225 +20 +-4.71319 +11 +6.37544 +21 +-4.71532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37544 +20 +-4.71532 +11 +6.37758 +21 +-4.71852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37758 +20 +-4.71852 +11 +6.37833 +21 +-4.72228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37833 +20 +-4.72228 +11 +6.37833 +21 +-4.75772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37833 +20 +-4.75772 +11 +6.37758 +21 +-4.76148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37758 +20 +-4.76148 +11 +6.37544 +21 +-4.76468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37544 +20 +-4.76468 +11 +6.37225 +21 +-4.76681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37225 +20 +-4.76681 +11 +6.36848 +21 +-4.76756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36848 +20 +-4.76756 +11 +6.34781 +21 +-4.76756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34781 +20 +-4.76756 +11 +6.34405 +21 +-4.76681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34405 +20 +-4.76681 +11 +6.34086 +21 +-4.76468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34086 +20 +-4.76468 +11 +6.33872 +21 +-4.76148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33872 +20 +-4.76148 +11 +6.33797 +21 +-4.75772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33797 +20 +-4.75772 +11 +6.33797 +21 +-4.72228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33797 +20 +-4.72228 +11 +6.33872 +21 +-4.71852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33872 +20 +-4.71852 +11 +6.34086 +21 +-4.71532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34086 +20 +-4.71532 +11 +6.34405 +21 +-4.71319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34405 +20 +-4.71319 +11 +6.34781 +21 +-4.71244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34781 +20 +-4.71244 +11 +6.36848 +21 +-4.71244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36848 +20 +-4.71244 +11 +6.37225 +21 +-4.71319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84814 +20 +-4.5748 +11 +5.85133 +21 +-4.57694 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85133 +20 +-4.57694 +11 +5.85346 +21 +-4.58013 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85346 +20 +-4.58013 +11 +5.85421 +21 +-4.5839 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85421 +20 +-4.5839 +11 +5.85421 +21 +-4.73744 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85421 +20 +-4.73744 +11 +5.85346 +21 +-4.74121 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85346 +20 +-4.74121 +11 +5.85133 +21 +-4.7444 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85133 +20 +-4.7444 +11 +5.84814 +21 +-4.74653 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84814 +20 +-4.74653 +11 +5.84437 +21 +-4.74728 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84437 +20 +-4.74728 +11 +5.76563 +21 +-4.74728 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76563 +20 +-4.74728 +11 +5.76186 +21 +-4.74653 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76186 +20 +-4.74653 +11 +5.75867 +21 +-4.7444 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75867 +20 +-4.7444 +11 +5.75654 +21 +-4.74121 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75654 +20 +-4.74121 +11 +5.75579 +21 +-4.73744 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75579 +20 +-4.73744 +11 +5.75579 +21 +-4.5839 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75579 +20 +-4.5839 +11 +5.75654 +21 +-4.58013 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75654 +20 +-4.58013 +11 +5.75867 +21 +-4.57694 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75867 +20 +-4.57694 +11 +5.76186 +21 +-4.5748 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76186 +20 +-4.5748 +11 +5.76563 +21 +-4.57406 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76563 +20 +-4.57406 +11 +5.84437 +21 +-4.57406 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84437 +20 +-4.57406 +11 +5.84814 +21 +-4.5748 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24056 +20 +-4.68372 +11 +6.24375 +21 +-4.68586 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24375 +20 +-4.68586 +11 +6.24588 +21 +-4.68905 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24588 +20 +-4.68905 +11 +6.24663 +21 +-4.69281 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24663 +20 +-4.69281 +11 +6.24663 +21 +-4.71348 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24663 +20 +-4.71348 +11 +6.24588 +21 +-4.71725 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24588 +20 +-4.71725 +11 +6.24375 +21 +-4.72044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24375 +20 +-4.72044 +11 +6.24056 +21 +-4.72258 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24056 +20 +-4.72258 +11 +6.23679 +21 +-4.72333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23679 +20 +-4.72333 +11 +6.20136 +21 +-4.72333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20136 +20 +-4.72333 +11 +6.19759 +21 +-4.72258 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19759 +20 +-4.72258 +11 +6.1944 +21 +-4.72044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1944 +20 +-4.72044 +11 +6.19226 +21 +-4.71725 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19226 +20 +-4.71725 +11 +6.19152 +21 +-4.71348 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19152 +20 +-4.71348 +11 +6.19152 +21 +-4.69281 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19152 +20 +-4.69281 +11 +6.19226 +21 +-4.68905 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19226 +20 +-4.68905 +11 +6.1944 +21 +-4.68586 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1944 +20 +-4.68586 +11 +6.19759 +21 +-4.68372 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19759 +20 +-4.68372 +11 +6.20136 +21 +-4.68297 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20136 +20 +-4.68297 +11 +6.23679 +21 +-4.68297 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23679 +20 +-4.68297 +11 +6.24056 +21 +-4.68372 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03056 +20 +-4.68372 +11 +6.03375 +21 +-4.68586 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03375 +20 +-4.68586 +11 +6.03588 +21 +-4.68905 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03588 +20 +-4.68905 +11 +6.03663 +21 +-4.69281 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03663 +20 +-4.69281 +11 +6.03663 +21 +-4.71348 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03663 +20 +-4.71348 +11 +6.03588 +21 +-4.71725 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03588 +20 +-4.71725 +11 +6.03375 +21 +-4.72044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03375 +20 +-4.72044 +11 +6.03056 +21 +-4.72258 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03056 +20 +-4.72258 +11 +6.02679 +21 +-4.72333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02679 +20 +-4.72333 +11 +5.99136 +21 +-4.72333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99136 +20 +-4.72333 +11 +5.98759 +21 +-4.72258 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98759 +20 +-4.72258 +11 +5.9844 +21 +-4.72044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9844 +20 +-4.72044 +11 +5.98226 +21 +-4.71725 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98226 +20 +-4.71725 +11 +5.98152 +21 +-4.71348 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98152 +20 +-4.71348 +11 +5.98152 +21 +-4.69281 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98152 +20 +-4.69281 +11 +5.98226 +21 +-4.68905 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98226 +20 +-4.68905 +11 +5.9844 +21 +-4.68586 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9844 +20 +-4.68586 +11 +5.98759 +21 +-4.68372 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98759 +20 +-4.68372 +11 +5.99136 +21 +-4.68297 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99136 +20 +-4.68297 +11 +6.02679 +21 +-4.68297 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02679 +20 +-4.68297 +11 +6.03056 +21 +-4.68372 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4441 +20 +-4.62319 +11 +6.44729 +21 +-4.62532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44729 +20 +-4.62532 +11 +6.44943 +21 +-4.62852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44943 +20 +-4.62852 +11 +6.45018 +21 +-4.63228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45018 +20 +-4.63228 +11 +6.45018 +21 +-4.66772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45018 +20 +-4.66772 +11 +6.44943 +21 +-4.67148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44943 +20 +-4.67148 +11 +6.44729 +21 +-4.67468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44729 +20 +-4.67468 +11 +6.4441 +21 +-4.67681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4441 +20 +-4.67681 +11 +6.44033 +21 +-4.67756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44033 +20 +-4.67756 +11 +6.41967 +21 +-4.67756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41967 +20 +-4.67756 +11 +6.4159 +21 +-4.67681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4159 +20 +-4.67681 +11 +6.41271 +21 +-4.67468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41271 +20 +-4.67468 +11 +6.41057 +21 +-4.67148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41057 +20 +-4.67148 +11 +6.40982 +21 +-4.66772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40982 +20 +-4.66772 +11 +6.40982 +21 +-4.63228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40982 +20 +-4.63228 +11 +6.41057 +21 +-4.62852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41057 +20 +-4.62852 +11 +6.41271 +21 +-4.62532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41271 +20 +-4.62532 +11 +6.4159 +21 +-4.62319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4159 +20 +-4.62319 +11 +6.41967 +21 +-4.62244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41967 +20 +-4.62244 +11 +6.44033 +21 +-4.62244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44033 +20 +-4.62244 +11 +6.4441 +21 +-4.62319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37225 +20 +-4.62319 +11 +6.37544 +21 +-4.62532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37544 +20 +-4.62532 +11 +6.37758 +21 +-4.62852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37758 +20 +-4.62852 +11 +6.37833 +21 +-4.63228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37833 +20 +-4.63228 +11 +6.37833 +21 +-4.66772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37833 +20 +-4.66772 +11 +6.37758 +21 +-4.67148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37758 +20 +-4.67148 +11 +6.37544 +21 +-4.67468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37544 +20 +-4.67468 +11 +6.37225 +21 +-4.67681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37225 +20 +-4.67681 +11 +6.36848 +21 +-4.67756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36848 +20 +-4.67756 +11 +6.34781 +21 +-4.67756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34781 +20 +-4.67756 +11 +6.34405 +21 +-4.67681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34405 +20 +-4.67681 +11 +6.34086 +21 +-4.67468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34086 +20 +-4.67468 +11 +6.33872 +21 +-4.67148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33872 +20 +-4.67148 +11 +6.33797 +21 +-4.66772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33797 +20 +-4.66772 +11 +6.33797 +21 +-4.63228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33797 +20 +-4.63228 +11 +6.33872 +21 +-4.62852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33872 +20 +-4.62852 +11 +6.34086 +21 +-4.62532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34086 +20 +-4.62532 +11 +6.34405 +21 +-4.62319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34405 +20 +-4.62319 +11 +6.34781 +21 +-4.62244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34781 +20 +-4.62244 +11 +6.36848 +21 +-4.62244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36848 +20 +-4.62244 +11 +6.37225 +21 +-4.62319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22814 +20 +-4.4798 +11 +6.23133 +21 +-4.48194 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23133 +20 +-4.48194 +11 +6.23346 +21 +-4.48513 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23346 +20 +-4.48513 +11 +6.23421 +21 +-4.4889 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23421 +20 +-4.4889 +11 +6.23421 +21 +-4.64244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23421 +20 +-4.64244 +11 +6.23346 +21 +-4.64621 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23346 +20 +-4.64621 +11 +6.23133 +21 +-4.6494 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23133 +20 +-4.6494 +11 +6.22814 +21 +-4.65153 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22814 +20 +-4.65153 +11 +6.22437 +21 +-4.65228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22437 +20 +-4.65228 +11 +6.14563 +21 +-4.65228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14563 +20 +-4.65228 +11 +6.14186 +21 +-4.65153 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14186 +20 +-4.65153 +11 +6.13867 +21 +-4.6494 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13867 +20 +-4.6494 +11 +6.13654 +21 +-4.64621 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13654 +20 +-4.64621 +11 +6.13579 +21 +-4.64244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13579 +20 +-4.64244 +11 +6.13579 +21 +-4.4889 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13579 +20 +-4.4889 +11 +6.13654 +21 +-4.48513 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13654 +20 +-4.48513 +11 +6.13867 +21 +-4.48194 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13867 +20 +-4.48194 +11 +6.14186 +21 +-4.4798 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14186 +20 +-4.4798 +11 +6.14563 +21 +-4.47906 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14563 +20 +-4.47906 +11 +6.22437 +21 +-4.47906 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22437 +20 +-4.47906 +11 +6.22814 +21 +-4.4798 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84814 +20 +-4.28347 +11 +5.85133 +21 +-4.2856 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85133 +20 +-4.2856 +11 +5.85346 +21 +-4.28879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85346 +20 +-4.28879 +11 +5.85421 +21 +-4.29256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85421 +20 +-4.29256 +11 +5.85421 +21 +-4.4461 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85421 +20 +-4.4461 +11 +5.85346 +21 +-4.44987 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85346 +20 +-4.44987 +11 +5.85133 +21 +-4.45306 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85133 +20 +-4.45306 +11 +5.84814 +21 +-4.4552 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84814 +20 +-4.4552 +11 +5.84437 +21 +-4.45594 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84437 +20 +-4.45594 +11 +5.76563 +21 +-4.45594 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76563 +20 +-4.45594 +11 +5.76186 +21 +-4.4552 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76186 +20 +-4.4552 +11 +5.75867 +21 +-4.45306 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75867 +20 +-4.45306 +11 +5.75654 +21 +-4.44987 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75654 +20 +-4.44987 +11 +5.75579 +21 +-4.4461 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75579 +20 +-4.4461 +11 +5.75579 +21 +-4.29256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75579 +20 +-4.29256 +11 +5.75654 +21 +-4.28879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75654 +20 +-4.28879 +11 +5.75867 +21 +-4.2856 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75867 +20 +-4.2856 +11 +5.76186 +21 +-4.28347 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76186 +20 +-4.28347 +11 +5.76563 +21 +-4.28272 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76563 +20 +-4.28272 +11 +5.84437 +21 +-4.28272 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84437 +20 +-4.28272 +11 +5.84814 +21 +-4.28347 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22814 +20 +-4.18847 +11 +6.23133 +21 +-4.1906 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23133 +20 +-4.1906 +11 +6.23346 +21 +-4.19379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23346 +20 +-4.19379 +11 +6.23421 +21 +-4.19756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23421 +20 +-4.19756 +11 +6.23421 +21 +-4.3511 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23421 +20 +-4.3511 +11 +6.23346 +21 +-4.35487 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23346 +20 +-4.35487 +11 +6.23133 +21 +-4.35806 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23133 +20 +-4.35806 +11 +6.22814 +21 +-4.3602 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22814 +20 +-4.3602 +11 +6.22437 +21 +-4.36094 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22437 +20 +-4.36094 +11 +6.14563 +21 +-4.36094 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14563 +20 +-4.36094 +11 +6.14186 +21 +-4.3602 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14186 +20 +-4.3602 +11 +6.13867 +21 +-4.35806 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13867 +20 +-4.35806 +11 +6.13654 +21 +-4.35487 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13654 +20 +-4.35487 +11 +6.13579 +21 +-4.3511 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13579 +20 +-4.3511 +11 +6.13579 +21 +-4.19756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13579 +20 +-4.19756 +11 +6.13654 +21 +-4.19379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13654 +20 +-4.19379 +11 +6.13867 +21 +-4.1906 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13867 +20 +-4.1906 +11 +6.14186 +21 +-4.18847 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14186 +20 +-4.18847 +11 +6.14563 +21 +-4.18772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14563 +20 +-4.18772 +11 +6.22437 +21 +-4.18772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22437 +20 +-4.18772 +11 +6.22814 +21 +-4.18847 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84814 +20 +-4.0048 +11 +5.85133 +21 +-4.00694 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85133 +20 +-4.00694 +11 +5.85346 +21 +-4.01013 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85346 +20 +-4.01013 +11 +5.85421 +21 +-4.0139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85421 +20 +-4.0139 +11 +5.85421 +21 +-4.16744 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85421 +20 +-4.16744 +11 +5.85346 +21 +-4.17121 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85346 +20 +-4.17121 +11 +5.85133 +21 +-4.1744 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85133 +20 +-4.1744 +11 +5.84814 +21 +-4.17653 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84814 +20 +-4.17653 +11 +5.84437 +21 +-4.17728 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84437 +20 +-4.17728 +11 +5.76563 +21 +-4.17728 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76563 +20 +-4.17728 +11 +5.76186 +21 +-4.17653 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76186 +20 +-4.17653 +11 +5.75867 +21 +-4.1744 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75867 +20 +-4.1744 +11 +5.75654 +21 +-4.17121 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75654 +20 +-4.17121 +11 +5.75579 +21 +-4.16744 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75579 +20 +-4.16744 +11 +5.75579 +21 +-4.0139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75579 +20 +-4.0139 +11 +5.75654 +21 +-4.01013 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75654 +20 +-4.01013 +11 +5.75867 +21 +-4.00694 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75867 +20 +-4.00694 +11 +5.76186 +21 +-4.0048 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76186 +20 +-4.0048 +11 +5.76563 +21 +-4.00406 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76563 +20 +-4.00406 +11 +5.84437 +21 +-4.00406 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84437 +20 +-4.00406 +11 +5.84814 +21 +-4.0048 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50461 +20 +-3.95154 +11 +6.50781 +21 +-3.95367 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50781 +20 +-3.95367 +11 +6.50994 +21 +-3.95686 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50994 +20 +-3.95686 +11 +6.51069 +21 +-3.96063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51069 +20 +-3.96063 +11 +6.51069 +21 +-4.03937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51069 +20 +-4.03937 +11 +6.50994 +21 +-4.04314 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50994 +20 +-4.04314 +11 +6.50781 +21 +-4.04633 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50781 +20 +-4.04633 +11 +6.50461 +21 +-4.04846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50461 +20 +-4.04846 +11 +6.50085 +21 +-4.04921 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50085 +20 +-4.04921 +11 +6.3473 +21 +-4.04921 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3473 +20 +-4.04921 +11 +6.34354 +21 +-4.04846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34354 +20 +-4.04846 +11 +6.34034 +21 +-4.04633 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34034 +20 +-4.04633 +11 +6.33821 +21 +-4.04314 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33821 +20 +-4.04314 +11 +6.33746 +21 +-4.03937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33746 +20 +-4.03937 +11 +6.33746 +21 +-3.96063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33746 +20 +-3.96063 +11 +6.33821 +21 +-3.95686 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33821 +20 +-3.95686 +11 +6.34034 +21 +-3.95367 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34034 +20 +-3.95367 +11 +6.34354 +21 +-3.95154 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34354 +20 +-3.95154 +11 +6.3473 +21 +-3.95079 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3473 +20 +-3.95079 +11 +6.50085 +21 +-3.95079 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50085 +20 +-3.95079 +11 +6.50461 +21 +-3.95154 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21327 +20 +-3.95154 +11 +6.21647 +21 +-3.95367 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21647 +20 +-3.95367 +11 +6.2186 +21 +-3.95686 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2186 +20 +-3.95686 +11 +6.21935 +21 +-3.96063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21935 +20 +-3.96063 +11 +6.21935 +21 +-4.03937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21935 +20 +-4.03937 +11 +6.2186 +21 +-4.04314 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2186 +20 +-4.04314 +11 +6.21647 +21 +-4.04633 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21647 +20 +-4.04633 +11 +6.21327 +21 +-4.04846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21327 +20 +-4.04846 +11 +6.20951 +21 +-4.04921 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20951 +20 +-4.04921 +11 +6.05596 +21 +-4.04921 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05596 +20 +-4.04921 +11 +6.0522 +21 +-4.04846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0522 +20 +-4.04846 +11 +6.049 +21 +-4.04633 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.049 +20 +-4.04633 +11 +6.04687 +21 +-4.04314 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04687 +20 +-4.04314 +11 +6.04612 +21 +-4.03937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04612 +20 +-4.03937 +11 +6.04612 +21 +-3.96063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04612 +20 +-3.96063 +11 +6.04687 +21 +-3.95686 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04687 +20 +-3.95686 +11 +6.049 +21 +-3.95367 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.049 +20 +-3.95367 +11 +6.0522 +21 +-3.95154 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0522 +20 +-3.95154 +11 +6.05596 +21 +-3.95079 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05596 +20 +-3.95079 +11 +6.20951 +21 +-3.95079 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20951 +20 +-3.95079 +11 +6.21327 +21 +-3.95154 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84814 +20 +-3.71347 +11 +5.85133 +21 +-3.7156 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85133 +20 +-3.7156 +11 +5.85346 +21 +-3.71879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85346 +20 +-3.71879 +11 +5.85421 +21 +-3.72256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85421 +20 +-3.72256 +11 +5.85421 +21 +-3.8761 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85421 +20 +-3.8761 +11 +5.85346 +21 +-3.87987 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85346 +20 +-3.87987 +11 +5.85133 +21 +-3.88306 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85133 +20 +-3.88306 +11 +5.84814 +21 +-3.8852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84814 +20 +-3.8852 +11 +5.84437 +21 +-3.88594 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84437 +20 +-3.88594 +11 +5.76563 +21 +-3.88594 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76563 +20 +-3.88594 +11 +5.76186 +21 +-3.8852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76186 +20 +-3.8852 +11 +5.75867 +21 +-3.88306 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75867 +20 +-3.88306 +11 +5.75654 +21 +-3.87987 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75654 +20 +-3.87987 +11 +5.75579 +21 +-3.8761 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75579 +20 +-3.8761 +11 +5.75579 +21 +-3.72256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75579 +20 +-3.72256 +11 +5.75654 +21 +-3.71879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75654 +20 +-3.71879 +11 +5.75867 +21 +-3.7156 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75867 +20 +-3.7156 +11 +5.76186 +21 +-3.71347 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76186 +20 +-3.71347 +11 +5.76563 +21 +-3.71272 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76563 +20 +-3.71272 +11 +5.84437 +21 +-3.71272 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84437 +20 +-3.71272 +11 +5.84814 +21 +-3.71347 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39239 +20 +-3.58406 +11 +6.39558 +21 +-3.58619 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39558 +20 +-3.58619 +11 +6.39772 +21 +-3.58938 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39772 +20 +-3.58938 +11 +6.39846 +21 +-3.59315 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39846 +20 +-3.59315 +11 +6.39846 +21 +-3.70339 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39846 +20 +-3.70339 +11 +6.39772 +21 +-3.70715 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39772 +20 +-3.70715 +11 +6.39558 +21 +-3.71035 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39558 +20 +-3.71035 +11 +6.39239 +21 +-3.71248 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39239 +20 +-3.71248 +11 +6.38862 +21 +-3.71323 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38862 +20 +-3.71323 +11 +6.34138 +21 +-3.71323 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34138 +20 +-3.71323 +11 +6.33761 +21 +-3.71248 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33761 +20 +-3.71248 +11 +6.33442 +21 +-3.71035 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33442 +20 +-3.71035 +11 +6.33228 +21 +-3.70715 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33228 +20 +-3.70715 +11 +6.33154 +21 +-3.70339 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33154 +20 +-3.70339 +11 +6.33154 +21 +-3.59315 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33154 +20 +-3.59315 +11 +6.33228 +21 +-3.58938 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33228 +20 +-3.58938 +11 +6.33442 +21 +-3.58619 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33442 +20 +-3.58619 +11 +6.33761 +21 +-3.58406 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33761 +20 +-3.58406 +11 +6.34138 +21 +-3.58331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34138 +20 +-3.58331 +11 +6.38862 +21 +-3.58331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38862 +20 +-3.58331 +11 +6.39239 +21 +-3.58406 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48247 +20 +-3.55347 +11 +6.48566 +21 +-3.5556 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48566 +20 +-3.5556 +11 +6.48779 +21 +-3.55879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48779 +20 +-3.55879 +11 +6.48854 +21 +-3.56256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48854 +20 +-3.56256 +11 +6.48854 +21 +-3.58224 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48854 +20 +-3.58224 +11 +6.48779 +21 +-3.58601 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48779 +20 +-3.58601 +11 +6.48566 +21 +-3.5892 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48566 +20 +-3.5892 +11 +6.48247 +21 +-3.59134 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48247 +20 +-3.59134 +11 +6.4787 +21 +-3.59209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4787 +20 +-3.59209 +11 +6.4413 +21 +-3.59209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4413 +20 +-3.59209 +11 +6.43753 +21 +-3.59134 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43753 +20 +-3.59134 +11 +6.43434 +21 +-3.5892 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43434 +20 +-3.5892 +11 +6.43221 +21 +-3.58601 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43221 +20 +-3.58601 +11 +6.43146 +21 +-3.58224 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43146 +20 +-3.58224 +11 +6.43146 +21 +-3.56256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43146 +20 +-3.56256 +11 +6.43221 +21 +-3.55879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43221 +20 +-3.55879 +11 +6.43434 +21 +-3.5556 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43434 +20 +-3.5556 +11 +6.43753 +21 +-3.55347 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43753 +20 +-3.55347 +11 +6.4413 +21 +-3.55272 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4413 +20 +-3.55272 +11 +6.4787 +21 +-3.55272 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4787 +20 +-3.55272 +11 +6.48247 +21 +-3.55347 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20121 +20 +-3.44154 +11 +6.2044 +21 +-3.44367 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2044 +20 +-3.44367 +11 +6.20653 +21 +-3.44686 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20653 +20 +-3.44686 +11 +6.20728 +21 +-3.45063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20728 +20 +-3.45063 +11 +6.20728 +21 +-3.52937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20728 +20 +-3.52937 +11 +6.20653 +21 +-3.53314 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20653 +20 +-3.53314 +11 +6.2044 +21 +-3.53633 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2044 +20 +-3.53633 +11 +6.20121 +21 +-3.53846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20121 +20 +-3.53846 +11 +6.19744 +21 +-3.53921 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19744 +20 +-3.53921 +11 +6.0439 +21 +-3.53921 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0439 +20 +-3.53921 +11 +6.04013 +21 +-3.53846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04013 +20 +-3.53846 +11 +6.03694 +21 +-3.53633 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03694 +20 +-3.53633 +11 +6.0348 +21 +-3.53314 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0348 +20 +-3.53314 +11 +6.03406 +21 +-3.52937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03406 +20 +-3.52937 +11 +6.03406 +21 +-3.45063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03406 +20 +-3.45063 +11 +6.0348 +21 +-3.44686 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0348 +20 +-3.44686 +11 +6.03694 +21 +-3.44367 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03694 +20 +-3.44367 +11 +6.04013 +21 +-3.44154 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04013 +20 +-3.44154 +11 +6.0439 +21 +-3.44079 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0439 +20 +-3.44079 +11 +6.19744 +21 +-3.44079 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19744 +20 +-3.44079 +11 +6.20121 +21 +-3.44154 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90987 +20 +-3.44154 +11 +5.91306 +21 +-3.44367 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91306 +20 +-3.44367 +11 +5.9152 +21 +-3.44686 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9152 +20 +-3.44686 +11 +5.91594 +21 +-3.45063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91594 +20 +-3.45063 +11 +5.91594 +21 +-3.52937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91594 +20 +-3.52937 +11 +5.9152 +21 +-3.53314 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9152 +20 +-3.53314 +11 +5.91306 +21 +-3.53633 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91306 +20 +-3.53633 +11 +5.90987 +21 +-3.53846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90987 +20 +-3.53846 +11 +5.9061 +21 +-3.53921 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9061 +20 +-3.53921 +11 +5.75256 +21 +-3.53921 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75256 +20 +-3.53921 +11 +5.74879 +21 +-3.53846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74879 +20 +-3.53846 +11 +5.7456 +21 +-3.53633 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7456 +20 +-3.53633 +11 +5.74347 +21 +-3.53314 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74347 +20 +-3.53314 +11 +5.74272 +21 +-3.52937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74272 +20 +-3.52937 +11 +5.74272 +21 +-3.45063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74272 +20 +-3.45063 +11 +5.74347 +21 +-3.44686 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74347 +20 +-3.44686 +11 +5.7456 +21 +-3.44367 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7456 +20 +-3.44367 +11 +5.74879 +21 +-3.44154 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74879 +20 +-3.44154 +11 +5.75256 +21 +-3.44079 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75256 +20 +-3.44079 +11 +5.9061 +21 +-3.44079 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9061 +20 +-3.44079 +11 +5.90987 +21 +-3.44154 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48247 +20 +-3.47866 +11 +6.48566 +21 +-3.4808 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48566 +20 +-3.4808 +11 +6.48779 +21 +-3.48399 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48779 +20 +-3.48399 +11 +6.48854 +21 +-3.48776 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48854 +20 +-3.48776 +11 +6.48854 +21 +-3.50744 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48854 +20 +-3.50744 +11 +6.48779 +21 +-3.51121 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48779 +20 +-3.51121 +11 +6.48566 +21 +-3.5144 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48566 +20 +-3.5144 +11 +6.48247 +21 +-3.51653 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48247 +20 +-3.51653 +11 +6.4787 +21 +-3.51728 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4787 +20 +-3.51728 +11 +6.4413 +21 +-3.51728 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4413 +20 +-3.51728 +11 +6.43753 +21 +-3.51653 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43753 +20 +-3.51653 +11 +6.43434 +21 +-3.5144 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43434 +20 +-3.5144 +11 +6.43221 +21 +-3.51121 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43221 +20 +-3.51121 +11 +6.43146 +21 +-3.50744 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43146 +20 +-3.50744 +11 +6.43146 +21 +-3.48776 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43146 +20 +-3.48776 +11 +6.43221 +21 +-3.48399 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43221 +20 +-3.48399 +11 +6.43434 +21 +-3.4808 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43434 +20 +-3.4808 +11 +6.43753 +21 +-3.47866 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43753 +20 +-3.47866 +11 +6.4413 +21 +-3.47791 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4413 +20 +-3.47791 +11 +6.4787 +21 +-3.47791 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4787 +20 +-3.47791 +11 +6.48247 +21 +-3.47866 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39239 +20 +-3.36752 +11 +6.39558 +21 +-3.36965 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39558 +20 +-3.36965 +11 +6.39772 +21 +-3.37285 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39772 +20 +-3.37285 +11 +6.39846 +21 +-3.37661 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39846 +20 +-3.37661 +11 +6.39846 +21 +-3.48685 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39846 +20 +-3.48685 +11 +6.39772 +21 +-3.49062 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39772 +20 +-3.49062 +11 +6.39558 +21 +-3.49381 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39558 +20 +-3.49381 +11 +6.39239 +21 +-3.49594 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39239 +20 +-3.49594 +11 +6.38862 +21 +-3.49669 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38862 +20 +-3.49669 +11 +6.34138 +21 +-3.49669 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34138 +20 +-3.49669 +11 +6.33761 +21 +-3.49594 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33761 +20 +-3.49594 +11 +6.33442 +21 +-3.49381 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33442 +20 +-3.49381 +11 +6.33228 +21 +-3.49062 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33228 +20 +-3.49062 +11 +6.33154 +21 +-3.48685 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33154 +20 +-3.48685 +11 +6.33154 +21 +-3.37661 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33154 +20 +-3.37661 +11 +6.33228 +21 +-3.37285 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33228 +20 +-3.37285 +11 +6.33442 +21 +-3.36965 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33442 +20 +-3.36965 +11 +6.33761 +21 +-3.36752 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33761 +20 +-3.36752 +11 +6.34138 +21 +-3.36677 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34138 +20 +-3.36677 +11 +6.38862 +21 +-3.36677 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38862 +20 +-3.36677 +11 +6.39239 +21 +-3.36752 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3069 +20 +-3.20681 +11 +6.31009 +21 +-3.20895 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31009 +20 +-3.20895 +11 +6.31222 +21 +-3.21214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31222 +20 +-3.21214 +11 +6.31297 +21 +-3.21591 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31297 +20 +-3.21591 +11 +6.31297 +21 +-3.23559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31297 +20 +-3.23559 +11 +6.31222 +21 +-3.23936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31222 +20 +-3.23936 +11 +6.31009 +21 +-3.24255 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31009 +20 +-3.24255 +11 +6.3069 +21 +-3.24468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3069 +20 +-3.24468 +11 +6.30313 +21 +-3.24543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30313 +20 +-3.24543 +11 +6.28344 +21 +-3.24543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28344 +20 +-3.24543 +11 +6.27968 +21 +-3.24468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27968 +20 +-3.24468 +11 +6.27649 +21 +-3.24255 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27649 +20 +-3.24255 +11 +6.27435 +21 +-3.23936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27435 +20 +-3.23936 +11 +6.2736 +21 +-3.23559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2736 +20 +-3.23559 +11 +6.2736 +21 +-3.21591 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2736 +20 +-3.21591 +11 +6.27435 +21 +-3.21214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27435 +20 +-3.21214 +11 +6.27649 +21 +-3.20895 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27649 +20 +-3.20895 +11 +6.27968 +21 +-3.20681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27968 +20 +-3.20681 +11 +6.28344 +21 +-3.20606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28344 +20 +-3.20606 +11 +6.30313 +21 +-3.20606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30313 +20 +-3.20606 +11 +6.3069 +21 +-3.20681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20847 +20 +-3.20681 +11 +6.21166 +21 +-3.20895 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21166 +20 +-3.20895 +11 +6.2138 +21 +-3.21214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2138 +20 +-3.21214 +11 +6.21455 +21 +-3.21591 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21455 +20 +-3.21591 +11 +6.21455 +21 +-3.23559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21455 +20 +-3.23559 +11 +6.2138 +21 +-3.23936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2138 +20 +-3.23936 +11 +6.21166 +21 +-3.24255 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21166 +20 +-3.24255 +11 +6.20847 +21 +-3.24468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20847 +20 +-3.24468 +11 +6.2047 +21 +-3.24543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2047 +20 +-3.24543 +11 +6.18502 +21 +-3.24543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18502 +20 +-3.24543 +11 +6.18125 +21 +-3.24468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18125 +20 +-3.24468 +11 +6.17806 +21 +-3.24255 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17806 +20 +-3.24255 +11 +6.17593 +21 +-3.23936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17593 +20 +-3.23936 +11 +6.17518 +21 +-3.23559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17518 +20 +-3.23559 +11 +6.17518 +21 +-3.21591 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17518 +20 +-3.21591 +11 +6.17593 +21 +-3.21214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17593 +20 +-3.21214 +11 +6.17806 +21 +-3.20895 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17806 +20 +-3.20895 +11 +6.18125 +21 +-3.20681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18125 +20 +-3.20681 +11 +6.18502 +21 +-3.20606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18502 +20 +-3.20606 +11 +6.2047 +21 +-3.20606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2047 +20 +-3.20606 +11 +6.20847 +21 +-3.20681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92062 +20 +-3.20421 +11 +5.92381 +21 +-3.20635 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92381 +20 +-3.20635 +11 +5.92594 +21 +-3.20954 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92594 +20 +-3.20954 +11 +5.92669 +21 +-3.21331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92669 +20 +-3.21331 +11 +5.92669 +21 +-3.23299 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92669 +20 +-3.23299 +11 +5.92594 +21 +-3.23676 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92594 +20 +-3.23676 +11 +5.92381 +21 +-3.23995 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92381 +20 +-3.23995 +11 +5.92062 +21 +-3.24209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92062 +20 +-3.24209 +11 +5.91685 +21 +-3.24283 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91685 +20 +-3.24283 +11 +5.87945 +21 +-3.24283 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87945 +20 +-3.24283 +11 +5.87568 +21 +-3.24209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87568 +20 +-3.24209 +11 +5.87249 +21 +-3.23995 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87249 +20 +-3.23995 +11 +5.87036 +21 +-3.23676 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87036 +20 +-3.23676 +11 +5.86961 +21 +-3.23299 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86961 +20 +-3.23299 +11 +5.86961 +21 +-3.21331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86961 +20 +-3.21331 +11 +5.87036 +21 +-3.20954 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87036 +20 +-3.20954 +11 +5.87249 +21 +-3.20635 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87249 +20 +-3.20635 +11 +5.87568 +21 +-3.20421 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87568 +20 +-3.20421 +11 +5.87945 +21 +-3.20346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87945 +20 +-3.20346 +11 +5.91685 +21 +-3.20346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91685 +20 +-3.20346 +11 +5.92062 +21 +-3.20421 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56068 +20 +-3.17643 +11 +6.56388 +21 +-3.17856 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56388 +20 +-3.17856 +11 +6.56601 +21 +-3.18175 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56601 +20 +-3.18175 +11 +6.56676 +21 +-3.18552 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56676 +20 +-3.18552 +11 +6.56676 +21 +-3.2052 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56676 +20 +-3.2052 +11 +6.56601 +21 +-3.20897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56601 +20 +-3.20897 +11 +6.56388 +21 +-3.21216 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56388 +20 +-3.21216 +11 +6.56068 +21 +-3.2143 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56068 +20 +-3.2143 +11 +6.55692 +21 +-3.21505 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55692 +20 +-3.21505 +11 +6.53723 +21 +-3.21505 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53723 +20 +-3.21505 +11 +6.53347 +21 +-3.2143 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53347 +20 +-3.2143 +11 +6.53027 +21 +-3.21216 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53027 +20 +-3.21216 +11 +6.52814 +21 +-3.20897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52814 +20 +-3.20897 +11 +6.52739 +21 +-3.2052 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52739 +20 +-3.2052 +11 +6.52739 +21 +-3.18552 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52739 +20 +-3.18552 +11 +6.52814 +21 +-3.18175 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52814 +20 +-3.18175 +11 +6.53027 +21 +-3.17856 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53027 +20 +-3.17856 +11 +6.53347 +21 +-3.17643 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53347 +20 +-3.17643 +11 +6.53723 +21 +-3.17568 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53723 +20 +-3.17568 +11 +6.55692 +21 +-3.17568 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55692 +20 +-3.17568 +11 +6.56068 +21 +-3.17643 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4829 +20 +-3.17581 +11 +6.48609 +21 +-3.17795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48609 +20 +-3.17795 +11 +6.48822 +21 +-3.18114 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48822 +20 +-3.18114 +11 +6.48897 +21 +-3.18491 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48897 +20 +-3.18491 +11 +6.48897 +21 +-3.20459 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48897 +20 +-3.20459 +11 +6.48822 +21 +-3.20836 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48822 +20 +-3.20836 +11 +6.48609 +21 +-3.21155 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48609 +20 +-3.21155 +11 +6.4829 +21 +-3.21368 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4829 +20 +-3.21368 +11 +6.47913 +21 +-3.21443 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47913 +20 +-3.21443 +11 +6.45944 +21 +-3.21443 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45944 +20 +-3.21443 +11 +6.45568 +21 +-3.21368 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45568 +20 +-3.21368 +11 +6.45249 +21 +-3.21155 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45249 +20 +-3.21155 +11 +6.45035 +21 +-3.20836 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45035 +20 +-3.20836 +11 +6.4496 +21 +-3.20459 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4496 +20 +-3.20459 +11 +6.4496 +21 +-3.18491 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4496 +20 +-3.18491 +11 +6.45035 +21 +-3.18114 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45035 +20 +-3.18114 +11 +6.45249 +21 +-3.17795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45249 +20 +-3.17795 +11 +6.45568 +21 +-3.17581 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45568 +20 +-3.17581 +11 +6.45944 +21 +-3.17506 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45944 +20 +-3.17506 +11 +6.47913 +21 +-3.17506 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47913 +20 +-3.17506 +11 +6.4829 +21 +-3.17581 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38447 +20 +-3.17581 +11 +6.38766 +21 +-3.17795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38766 +20 +-3.17795 +11 +6.3898 +21 +-3.18114 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3898 +20 +-3.18114 +11 +6.39055 +21 +-3.18491 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39055 +20 +-3.18491 +11 +6.39055 +21 +-3.20459 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39055 +20 +-3.20459 +11 +6.3898 +21 +-3.20836 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3898 +20 +-3.20836 +11 +6.38766 +21 +-3.21155 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38766 +20 +-3.21155 +11 +6.38447 +21 +-3.21368 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38447 +20 +-3.21368 +11 +6.3807 +21 +-3.21443 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3807 +20 +-3.21443 +11 +6.36102 +21 +-3.21443 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36102 +20 +-3.21443 +11 +6.35725 +21 +-3.21368 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35725 +20 +-3.21368 +11 +6.35406 +21 +-3.21155 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35406 +20 +-3.21155 +11 +6.35193 +21 +-3.20836 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35193 +20 +-3.20836 +11 +6.35118 +21 +-3.20459 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35118 +20 +-3.20459 +11 +6.35118 +21 +-3.18491 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35118 +20 +-3.18491 +11 +6.35193 +21 +-3.18114 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35193 +20 +-3.18114 +11 +6.35406 +21 +-3.17795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35406 +20 +-3.17795 +11 +6.35725 +21 +-3.17581 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35725 +20 +-3.17581 +11 +6.36102 +21 +-3.17506 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36102 +20 +-3.17506 +11 +6.3807 +21 +-3.17506 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3807 +20 +-3.17506 +11 +6.38447 +21 +-3.17581 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06318 +20 +-3.12894 +11 +6.06637 +21 +-3.13107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06637 +20 +-3.13107 +11 +6.0685 +21 +-3.13426 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0685 +20 +-3.13426 +11 +6.06925 +21 +-3.13803 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06925 +20 +-3.13803 +11 +6.06925 +21 +-3.17346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06925 +20 +-3.17346 +11 +6.0685 +21 +-3.17723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0685 +20 +-3.17723 +11 +6.06637 +21 +-3.18042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06637 +20 +-3.18042 +11 +6.06318 +21 +-3.18256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06318 +20 +-3.18256 +11 +6.05941 +21 +-3.18331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05941 +20 +-3.18331 +11 +6.03874 +21 +-3.18331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03874 +20 +-3.18331 +11 +6.03497 +21 +-3.18256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03497 +20 +-3.18256 +11 +6.03178 +21 +-3.18042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03178 +20 +-3.18042 +11 +6.02965 +21 +-3.17723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02965 +20 +-3.17723 +11 +6.0289 +21 +-3.17346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0289 +20 +-3.17346 +11 +6.0289 +21 +-3.13803 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0289 +20 +-3.13803 +11 +6.02965 +21 +-3.13426 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02965 +20 +-3.13426 +11 +6.03178 +21 +-3.13107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03178 +20 +-3.13107 +11 +6.03497 +21 +-3.12894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03497 +20 +-3.12894 +11 +6.03874 +21 +-3.12819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03874 +20 +-3.12819 +11 +6.05941 +21 +-3.12819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05941 +20 +-3.12819 +11 +6.06318 +21 +-3.12894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99133 +20 +-3.12894 +11 +5.99452 +21 +-3.13107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99452 +20 +-3.13107 +11 +5.99665 +21 +-3.13426 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99665 +20 +-3.13426 +11 +5.9974 +21 +-3.13803 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9974 +20 +-3.13803 +11 +5.9974 +21 +-3.17346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9974 +20 +-3.17346 +11 +5.99665 +21 +-3.17723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99665 +20 +-3.17723 +11 +5.99452 +21 +-3.18042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99452 +20 +-3.18042 +11 +5.99133 +21 +-3.18256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99133 +20 +-3.18256 +11 +5.98756 +21 +-3.18331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98756 +20 +-3.18331 +11 +5.96689 +21 +-3.18331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96689 +20 +-3.18331 +11 +5.96312 +21 +-3.18256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96312 +20 +-3.18256 +11 +5.95993 +21 +-3.18042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95993 +20 +-3.18042 +11 +5.9578 +21 +-3.17723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9578 +20 +-3.17723 +11 +5.95705 +21 +-3.17346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95705 +20 +-3.17346 +11 +5.95705 +21 +-3.13803 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95705 +20 +-3.13803 +11 +5.9578 +21 +-3.13426 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9578 +20 +-3.13426 +11 +5.95993 +21 +-3.13107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95993 +20 +-3.13107 +11 +5.96312 +21 +-3.12894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96312 +20 +-3.12894 +11 +5.96689 +21 +-3.12819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96689 +20 +-3.12819 +11 +5.98756 +21 +-3.12819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98756 +20 +-3.12819 +11 +5.99133 +21 +-3.12894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92062 +20 +-3.12941 +11 +5.92381 +21 +-3.13154 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92381 +20 +-3.13154 +11 +5.92594 +21 +-3.13474 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92594 +20 +-3.13474 +11 +5.92669 +21 +-3.1385 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92669 +20 +-3.1385 +11 +5.92669 +21 +-3.15819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92669 +20 +-3.15819 +11 +5.92594 +21 +-3.16196 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92594 +20 +-3.16196 +11 +5.92381 +21 +-3.16515 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92381 +20 +-3.16515 +11 +5.92062 +21 +-3.16728 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92062 +20 +-3.16728 +11 +5.91685 +21 +-3.16803 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91685 +20 +-3.16803 +11 +5.87945 +21 +-3.16803 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87945 +20 +-3.16803 +11 +5.87568 +21 +-3.16728 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87568 +20 +-3.16728 +11 +5.87249 +21 +-3.16515 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87249 +20 +-3.16515 +11 +5.87036 +21 +-3.16196 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87036 +20 +-3.16196 +11 +5.86961 +21 +-3.15819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86961 +20 +-3.15819 +11 +5.86961 +21 +-3.1385 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86961 +20 +-3.1385 +11 +5.87036 +21 +-3.13474 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87036 +20 +-3.13474 +11 +5.87249 +21 +-3.13154 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87249 +20 +-3.13154 +11 +5.87568 +21 +-3.12941 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87568 +20 +-3.12941 +11 +5.87945 +21 +-3.12866 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87945 +20 +-3.12866 +11 +5.91685 +21 +-3.12866 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91685 +20 +-3.12866 +11 +5.92062 +21 +-3.12941 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49054 +20 +-3.10562 +11 +6.49374 +21 +-3.10775 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49374 +20 +-3.10775 +11 +6.49587 +21 +-3.11094 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49587 +20 +-3.11094 +11 +6.49662 +21 +-3.11471 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49662 +20 +-3.11471 +11 +6.49662 +21 +-3.13439 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49662 +20 +-3.13439 +11 +6.49587 +21 +-3.13816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49587 +20 +-3.13816 +11 +6.49374 +21 +-3.14135 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49374 +20 +-3.14135 +11 +6.49054 +21 +-3.14349 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49054 +20 +-3.14349 +11 +6.48678 +21 +-3.14424 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48678 +20 +-3.14424 +11 +6.44937 +21 +-3.14424 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44937 +20 +-3.14424 +11 +6.44561 +21 +-3.14349 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44561 +20 +-3.14349 +11 +6.44241 +21 +-3.14135 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44241 +20 +-3.14135 +11 +6.44028 +21 +-3.13816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44028 +20 +-3.13816 +11 +6.43953 +21 +-3.13439 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43953 +20 +-3.13439 +11 +6.43953 +21 +-3.11471 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43953 +20 +-3.11471 +11 +6.44028 +21 +-3.11094 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44028 +20 +-3.11094 +11 +6.44241 +21 +-3.10775 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44241 +20 +-3.10775 +11 +6.44561 +21 +-3.10562 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44561 +20 +-3.10562 +11 +6.44937 +21 +-3.10487 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44937 +20 +-3.10487 +11 +6.48678 +21 +-3.10487 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48678 +20 +-3.10487 +11 +6.49054 +21 +-3.10562 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41154 +20 +-3.10521 +11 +6.41474 +21 +-3.10735 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41474 +20 +-3.10735 +11 +6.41687 +21 +-3.11054 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41687 +20 +-3.11054 +11 +6.41762 +21 +-3.11431 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41762 +20 +-3.11431 +11 +6.41762 +21 +-3.13399 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41762 +20 +-3.13399 +11 +6.41687 +21 +-3.13776 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41687 +20 +-3.13776 +11 +6.41474 +21 +-3.14095 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41474 +20 +-3.14095 +11 +6.41154 +21 +-3.14309 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41154 +20 +-3.14309 +11 +6.40778 +21 +-3.14383 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40778 +20 +-3.14383 +11 +6.37037 +21 +-3.14383 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37037 +20 +-3.14383 +11 +6.36661 +21 +-3.14309 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36661 +20 +-3.14309 +11 +6.36341 +21 +-3.14095 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36341 +20 +-3.14095 +11 +6.36128 +21 +-3.13776 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36128 +20 +-3.13776 +11 +6.36053 +21 +-3.13399 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36053 +20 +-3.13399 +11 +6.36053 +21 +-3.11431 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36053 +20 +-3.11431 +11 +6.36128 +21 +-3.11054 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36128 +20 +-3.11054 +11 +6.36341 +21 +-3.10735 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36341 +20 +-3.10735 +11 +6.36661 +21 +-3.10521 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36661 +20 +-3.10521 +11 +6.37037 +21 +-3.10446 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37037 +20 +-3.10446 +11 +6.40778 +21 +-3.10446 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40778 +20 +-3.10446 +11 +6.41154 +21 +-3.10521 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33154 +20 +-3.10521 +11 +6.33474 +21 +-3.10735 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33474 +20 +-3.10735 +11 +6.33687 +21 +-3.11054 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33687 +20 +-3.11054 +11 +6.33762 +21 +-3.11431 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33762 +20 +-3.11431 +11 +6.33762 +21 +-3.13399 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33762 +20 +-3.13399 +11 +6.33687 +21 +-3.13776 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33687 +20 +-3.13776 +11 +6.33474 +21 +-3.14095 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33474 +20 +-3.14095 +11 +6.33154 +21 +-3.14309 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33154 +20 +-3.14309 +11 +6.32778 +21 +-3.14383 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32778 +20 +-3.14383 +11 +6.29037 +21 +-3.14383 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29037 +20 +-3.14383 +11 +6.28661 +21 +-3.14309 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28661 +20 +-3.14309 +11 +6.28341 +21 +-3.14095 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28341 +20 +-3.14095 +11 +6.28128 +21 +-3.13776 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28128 +20 +-3.13776 +11 +6.28053 +21 +-3.13399 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28053 +20 +-3.13399 +11 +6.28053 +21 +-3.11431 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28053 +20 +-3.11431 +11 +6.28128 +21 +-3.11054 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28128 +20 +-3.11054 +11 +6.28341 +21 +-3.10735 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28341 +20 +-3.10735 +11 +6.28661 +21 +-3.10521 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28661 +20 +-3.10521 +11 +6.29037 +21 +-3.10446 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29037 +20 +-3.10446 +11 +6.32778 +21 +-3.10446 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32778 +20 +-3.10446 +11 +6.33154 +21 +-3.10521 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24909 +20 +-3.08436 +11 +6.25228 +21 +-3.08649 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25228 +20 +-3.08649 +11 +6.25441 +21 +-3.08968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25441 +20 +-3.08968 +11 +6.25516 +21 +-3.09345 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25516 +20 +-3.09345 +11 +6.25516 +21 +-3.13085 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25516 +20 +-3.13085 +11 +6.25441 +21 +-3.13462 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25441 +20 +-3.13462 +11 +6.25228 +21 +-3.13781 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25228 +20 +-3.13781 +11 +6.24909 +21 +-3.13994 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24909 +20 +-3.13994 +11 +6.24532 +21 +-3.14069 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24532 +20 +-3.14069 +11 +6.22563 +21 +-3.14069 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22563 +20 +-3.14069 +11 +6.22187 +21 +-3.13994 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22187 +20 +-3.13994 +11 +6.21867 +21 +-3.13781 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21867 +20 +-3.13781 +11 +6.21654 +21 +-3.13462 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21654 +20 +-3.13462 +11 +6.21579 +21 +-3.13085 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21579 +20 +-3.13085 +11 +6.21579 +21 +-3.09345 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21579 +20 +-3.09345 +11 +6.21654 +21 +-3.08968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21654 +20 +-3.08968 +11 +6.21867 +21 +-3.08649 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21867 +20 +-3.08649 +11 +6.22187 +21 +-3.08436 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22187 +20 +-3.08436 +11 +6.22563 +21 +-3.08361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22563 +20 +-3.08361 +11 +6.24532 +21 +-3.08361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24532 +20 +-3.08361 +11 +6.24909 +21 +-3.08436 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17428 +20 +-3.08436 +11 +6.17748 +21 +-3.08649 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17748 +20 +-3.08649 +11 +6.17961 +21 +-3.08968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17961 +20 +-3.08968 +11 +6.18036 +21 +-3.09345 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18036 +20 +-3.09345 +11 +6.18036 +21 +-3.13085 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18036 +20 +-3.13085 +11 +6.17961 +21 +-3.13462 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17961 +20 +-3.13462 +11 +6.17748 +21 +-3.13781 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17748 +20 +-3.13781 +11 +6.17428 +21 +-3.13994 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17428 +20 +-3.13994 +11 +6.17052 +21 +-3.14069 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17052 +20 +-3.14069 +11 +6.15083 +21 +-3.14069 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15083 +20 +-3.14069 +11 +6.14706 +21 +-3.13994 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14706 +20 +-3.13994 +11 +6.14387 +21 +-3.13781 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14387 +20 +-3.13781 +11 +6.14174 +21 +-3.13462 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14174 +20 +-3.13462 +11 +6.14099 +21 +-3.13085 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14099 +20 +-3.13085 +11 +6.14099 +21 +-3.09345 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14099 +20 +-3.09345 +11 +6.14174 +21 +-3.08968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14174 +20 +-3.08968 +11 +6.14387 +21 +-3.08649 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14387 +20 +-3.08649 +11 +6.14706 +21 +-3.08436 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14706 +20 +-3.08436 +11 +6.15083 +21 +-3.08361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15083 +20 +-3.08361 +11 +6.17052 +21 +-3.08361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17052 +20 +-3.08361 +11 +6.17428 +21 +-3.08436 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56068 +20 +-3.078 +11 +6.56388 +21 +-3.08013 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56388 +20 +-3.08013 +11 +6.56601 +21 +-3.08333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56601 +20 +-3.08333 +11 +6.56676 +21 +-3.08709 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56676 +20 +-3.08709 +11 +6.56676 +21 +-3.10678 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56676 +20 +-3.10678 +11 +6.56601 +21 +-3.11055 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56601 +20 +-3.11055 +11 +6.56388 +21 +-3.11374 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56388 +20 +-3.11374 +11 +6.56068 +21 +-3.11587 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56068 +20 +-3.11587 +11 +6.55692 +21 +-3.11662 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55692 +20 +-3.11662 +11 +6.53723 +21 +-3.11662 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53723 +20 +-3.11662 +11 +6.53347 +21 +-3.11587 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53347 +20 +-3.11587 +11 +6.53027 +21 +-3.11374 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53027 +20 +-3.11374 +11 +6.52814 +21 +-3.11055 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52814 +20 +-3.11055 +11 +6.52739 +21 +-3.10678 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52739 +20 +-3.10678 +11 +6.52739 +21 +-3.08709 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52739 +20 +-3.08709 +11 +6.52814 +21 +-3.08333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52814 +20 +-3.08333 +11 +6.53027 +21 +-3.08013 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53027 +20 +-3.08013 +11 +6.53347 +21 +-3.078 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53347 +20 +-3.078 +11 +6.53723 +21 +-3.07725 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53723 +20 +-3.07725 +11 +6.55692 +21 +-3.07725 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55692 +20 +-3.07725 +11 +6.56068 +21 +-3.078 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49054 +20 +-3.03081 +11 +6.49374 +21 +-3.03295 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49374 +20 +-3.03295 +11 +6.49587 +21 +-3.03614 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49587 +20 +-3.03614 +11 +6.49662 +21 +-3.03991 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49662 +20 +-3.03991 +11 +6.49662 +21 +-3.05959 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49662 +20 +-3.05959 +11 +6.49587 +21 +-3.06336 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49587 +20 +-3.06336 +11 +6.49374 +21 +-3.06655 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49374 +20 +-3.06655 +11 +6.49054 +21 +-3.06868 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49054 +20 +-3.06868 +11 +6.48678 +21 +-3.06943 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48678 +20 +-3.06943 +11 +6.44937 +21 +-3.06943 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44937 +20 +-3.06943 +11 +6.44561 +21 +-3.06868 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44561 +20 +-3.06868 +11 +6.44241 +21 +-3.06655 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44241 +20 +-3.06655 +11 +6.44028 +21 +-3.06336 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44028 +20 +-3.06336 +11 +6.43953 +21 +-3.05959 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43953 +20 +-3.05959 +11 +6.43953 +21 +-3.03991 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43953 +20 +-3.03991 +11 +6.44028 +21 +-3.03614 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44028 +20 +-3.03614 +11 +6.44241 +21 +-3.03295 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44241 +20 +-3.03295 +11 +6.44561 +21 +-3.03081 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44561 +20 +-3.03081 +11 +6.44937 +21 +-3.03006 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44937 +20 +-3.03006 +11 +6.48678 +21 +-3.03006 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48678 +20 +-3.03006 +11 +6.49054 +21 +-3.03081 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41154 +20 +-3.03041 +11 +6.41474 +21 +-3.03254 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41474 +20 +-3.03254 +11 +6.41687 +21 +-3.03574 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41687 +20 +-3.03574 +11 +6.41762 +21 +-3.0395 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41762 +20 +-3.0395 +11 +6.41762 +21 +-3.05919 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41762 +20 +-3.05919 +11 +6.41687 +21 +-3.06296 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41687 +20 +-3.06296 +11 +6.41474 +21 +-3.06615 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41474 +20 +-3.06615 +11 +6.41154 +21 +-3.06828 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41154 +20 +-3.06828 +11 +6.40778 +21 +-3.06903 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40778 +20 +-3.06903 +11 +6.37037 +21 +-3.06903 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37037 +20 +-3.06903 +11 +6.36661 +21 +-3.06828 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36661 +20 +-3.06828 +11 +6.36341 +21 +-3.06615 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36341 +20 +-3.06615 +11 +6.36128 +21 +-3.06296 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36128 +20 +-3.06296 +11 +6.36053 +21 +-3.05919 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36053 +20 +-3.05919 +11 +6.36053 +21 +-3.0395 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36053 +20 +-3.0395 +11 +6.36128 +21 +-3.03574 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36128 +20 +-3.03574 +11 +6.36341 +21 +-3.03254 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36341 +20 +-3.03254 +11 +6.36661 +21 +-3.03041 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36661 +20 +-3.03041 +11 +6.37037 +21 +-3.02966 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37037 +20 +-3.02966 +11 +6.40778 +21 +-3.02966 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40778 +20 +-3.02966 +11 +6.41154 +21 +-3.03041 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33154 +20 +-3.03041 +11 +6.33474 +21 +-3.03254 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33474 +20 +-3.03254 +11 +6.33687 +21 +-3.03574 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33687 +20 +-3.03574 +11 +6.33762 +21 +-3.0395 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33762 +20 +-3.0395 +11 +6.33762 +21 +-3.05919 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33762 +20 +-3.05919 +11 +6.33687 +21 +-3.06296 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33687 +20 +-3.06296 +11 +6.33474 +21 +-3.06615 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33474 +20 +-3.06615 +11 +6.33154 +21 +-3.06828 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33154 +20 +-3.06828 +11 +6.32778 +21 +-3.06903 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32778 +20 +-3.06903 +11 +6.29037 +21 +-3.06903 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29037 +20 +-3.06903 +11 +6.28661 +21 +-3.06828 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28661 +20 +-3.06828 +11 +6.28341 +21 +-3.06615 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28341 +20 +-3.06615 +11 +6.28128 +21 +-3.06296 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28128 +20 +-3.06296 +11 +6.28053 +21 +-3.05919 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28053 +20 +-3.05919 +11 +6.28053 +21 +-3.0395 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28053 +20 +-3.0395 +11 +6.28128 +21 +-3.03574 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28128 +20 +-3.03574 +11 +6.28341 +21 +-3.03254 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28341 +20 +-3.03254 +11 +6.28661 +21 +-3.03041 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28661 +20 +-3.03041 +11 +6.29037 +21 +-3.02966 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29037 +20 +-3.02966 +11 +6.32778 +21 +-3.02966 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32778 +20 +-3.02966 +11 +6.33154 +21 +-3.03041 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2491 +20 +-3.00834 +11 +6.25229 +21 +-3.01047 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25229 +20 +-3.01047 +11 +6.25443 +21 +-3.01367 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25443 +20 +-3.01367 +11 +6.25518 +21 +-3.01743 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25518 +20 +-3.01743 +11 +6.25518 +21 +-3.05287 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25518 +20 +-3.05287 +11 +6.25443 +21 +-3.05663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25443 +20 +-3.05663 +11 +6.25229 +21 +-3.05983 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25229 +20 +-3.05983 +11 +6.2491 +21 +-3.06196 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2491 +20 +-3.06196 +11 +6.24533 +21 +-3.06271 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24533 +20 +-3.06271 +11 +6.22467 +21 +-3.06271 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22467 +20 +-3.06271 +11 +6.2209 +21 +-3.06196 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2209 +20 +-3.06196 +11 +6.21771 +21 +-3.05983 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21771 +20 +-3.05983 +11 +6.21557 +21 +-3.05663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21557 +20 +-3.05663 +11 +6.21482 +21 +-3.05287 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21482 +20 +-3.05287 +11 +6.21482 +21 +-3.01743 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21482 +20 +-3.01743 +11 +6.21557 +21 +-3.01367 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21557 +20 +-3.01367 +11 +6.21771 +21 +-3.01047 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21771 +20 +-3.01047 +11 +6.2209 +21 +-3.00834 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2209 +20 +-3.00834 +11 +6.22467 +21 +-3.00759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22467 +20 +-3.00759 +11 +6.24533 +21 +-3.00759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24533 +20 +-3.00759 +11 +6.2491 +21 +-3.00834 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17725 +20 +-3.00834 +11 +6.18044 +21 +-3.01047 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18044 +20 +-3.01047 +11 +6.18258 +21 +-3.01367 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18258 +20 +-3.01367 +11 +6.18333 +21 +-3.01743 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18333 +20 +-3.01743 +11 +6.18333 +21 +-3.05287 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18333 +20 +-3.05287 +11 +6.18258 +21 +-3.05663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18258 +20 +-3.05663 +11 +6.18044 +21 +-3.05983 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18044 +20 +-3.05983 +11 +6.17725 +21 +-3.06196 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17725 +20 +-3.06196 +11 +6.17348 +21 +-3.06271 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17348 +20 +-3.06271 +11 +6.15281 +21 +-3.06271 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15281 +20 +-3.06271 +11 +6.14905 +21 +-3.06196 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14905 +20 +-3.06196 +11 +6.14586 +21 +-3.05983 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14586 +20 +-3.05983 +11 +6.14372 +21 +-3.05663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14372 +20 +-3.05663 +11 +6.14297 +21 +-3.05287 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14297 +20 +-3.05287 +11 +6.14297 +21 +-3.01743 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14297 +20 +-3.01743 +11 +6.14372 +21 +-3.01367 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14372 +20 +-3.01367 +11 +6.14586 +21 +-3.01047 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14586 +20 +-3.01047 +11 +6.14905 +21 +-3.00834 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14905 +20 +-3.00834 +11 +6.15281 +21 +-3.00759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15281 +20 +-3.00759 +11 +6.17348 +21 +-3.00759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17348 +20 +-3.00759 +11 +6.17725 +21 +-3.00834 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9741 +20 +-2.97894 +11 +5.97729 +21 +-2.98107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97729 +20 +-2.98107 +11 +5.97943 +21 +-2.98426 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97943 +20 +-2.98426 +11 +5.98018 +21 +-2.98803 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98018 +20 +-2.98803 +11 +5.98018 +21 +-3.02346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98018 +20 +-3.02346 +11 +5.97943 +21 +-3.02723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97943 +20 +-3.02723 +11 +5.97729 +21 +-3.03042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97729 +20 +-3.03042 +11 +5.9741 +21 +-3.03256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9741 +20 +-3.03256 +11 +5.97033 +21 +-3.03331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97033 +20 +-3.03331 +11 +5.94967 +21 +-3.03331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94967 +20 +-3.03331 +11 +5.9459 +21 +-3.03256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9459 +20 +-3.03256 +11 +5.94271 +21 +-3.03042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94271 +20 +-3.03042 +11 +5.94057 +21 +-3.02723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94057 +20 +-3.02723 +11 +5.93982 +21 +-3.02346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93982 +20 +-3.02346 +11 +5.93982 +21 +-2.98803 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93982 +20 +-2.98803 +11 +5.94057 +21 +-2.98426 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94057 +20 +-2.98426 +11 +5.94271 +21 +-2.98107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94271 +20 +-2.98107 +11 +5.9459 +21 +-2.97894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9459 +20 +-2.97894 +11 +5.94967 +21 +-2.97819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94967 +20 +-2.97819 +11 +5.97033 +21 +-2.97819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97033 +20 +-2.97819 +11 +5.9741 +21 +-2.97894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90225 +20 +-2.97894 +11 +5.90544 +21 +-2.98107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90544 +20 +-2.98107 +11 +5.90758 +21 +-2.98426 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90758 +20 +-2.98426 +11 +5.90833 +21 +-2.98803 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90833 +20 +-2.98803 +11 +5.90833 +21 +-3.02346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90833 +20 +-3.02346 +11 +5.90758 +21 +-3.02723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90758 +20 +-3.02723 +11 +5.90544 +21 +-3.03042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90544 +20 +-3.03042 +11 +5.90225 +21 +-3.03256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90225 +20 +-3.03256 +11 +5.89848 +21 +-3.03331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89848 +20 +-3.03331 +11 +5.87781 +21 +-3.03331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87781 +20 +-3.03331 +11 +5.87405 +21 +-3.03256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87405 +20 +-3.03256 +11 +5.87086 +21 +-3.03042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87086 +20 +-3.03042 +11 +5.86872 +21 +-3.02723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86872 +20 +-3.02723 +11 +5.86797 +21 +-3.02346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86797 +20 +-3.02346 +11 +5.86797 +21 +-2.98803 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86797 +20 +-2.98803 +11 +5.86872 +21 +-2.98426 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86872 +20 +-2.98426 +11 +5.87086 +21 +-2.98107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87086 +20 +-2.98107 +11 +5.87405 +21 +-2.97894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87405 +20 +-2.97894 +11 +5.87781 +21 +-2.97819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87781 +20 +-2.97819 +11 +5.89848 +21 +-2.97819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89848 +20 +-2.97819 +11 +5.90225 +21 +-2.97894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57568 +20 +-2.98243 +11 +6.57888 +21 +-2.98456 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57888 +20 +-2.98456 +11 +6.58101 +21 +-2.98775 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58101 +20 +-2.98775 +11 +6.58176 +21 +-2.99152 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58176 +20 +-2.99152 +11 +6.58176 +21 +-3.0112 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58176 +20 +-3.0112 +11 +6.58101 +21 +-3.01497 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58101 +20 +-3.01497 +11 +6.57888 +21 +-3.01816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57888 +20 +-3.01816 +11 +6.57568 +21 +-3.0203 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57568 +20 +-3.0203 +11 +6.57192 +21 +-3.02105 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57192 +20 +-3.02105 +11 +6.55223 +21 +-3.02105 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55223 +20 +-3.02105 +11 +6.54847 +21 +-3.0203 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54847 +20 +-3.0203 +11 +6.54527 +21 +-3.01816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54527 +20 +-3.01816 +11 +6.54314 +21 +-3.01497 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54314 +20 +-3.01497 +11 +6.54239 +21 +-3.0112 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54239 +20 +-3.0112 +11 +6.54239 +21 +-2.99152 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54239 +20 +-2.99152 +11 +6.54314 +21 +-2.98775 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54314 +20 +-2.98775 +11 +6.54527 +21 +-2.98456 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54527 +20 +-2.98456 +11 +6.54847 +21 +-2.98243 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54847 +20 +-2.98243 +11 +6.55223 +21 +-2.98168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55223 +20 +-2.98168 +11 +6.57192 +21 +-2.98168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57192 +20 +-2.98168 +11 +6.57568 +21 +-2.98243 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49424 +20 +-2.91065 +11 +6.49616 +21 +-2.91193 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49616 +20 +-2.91193 +11 +6.49744 +21 +-2.91385 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49744 +20 +-2.91385 +11 +6.49789 +21 +-2.91611 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49789 +20 +-2.91611 +11 +6.49789 +21 +-2.98107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49789 +20 +-2.98107 +11 +6.49744 +21 +-2.98333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49744 +20 +-2.98333 +11 +6.49616 +21 +-2.98525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49616 +20 +-2.98525 +11 +6.49424 +21 +-2.98653 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49424 +20 +-2.98653 +11 +6.49198 +21 +-2.98698 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49198 +20 +-2.98698 +11 +6.48017 +21 +-2.98698 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48017 +20 +-2.98698 +11 +6.47791 +21 +-2.98653 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47791 +20 +-2.98653 +11 +6.47599 +21 +-2.98525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47599 +20 +-2.98525 +11 +6.47471 +21 +-2.98333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47471 +20 +-2.98333 +11 +6.47426 +21 +-2.98107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47426 +20 +-2.98107 +11 +6.47426 +21 +-2.91611 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47426 +20 +-2.91611 +11 +6.47471 +21 +-2.91385 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47471 +20 +-2.91385 +11 +6.47599 +21 +-2.91193 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47599 +20 +-2.91193 +11 +6.47791 +21 +-2.91065 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47791 +20 +-2.91065 +11 +6.48017 +21 +-2.9102 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48017 +20 +-2.9102 +11 +6.49198 +21 +-2.9102 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49198 +20 +-2.9102 +11 +6.49424 +21 +-2.91065 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44424 +20 +-2.91065 +11 +6.44616 +21 +-2.91193 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44616 +20 +-2.91193 +11 +6.44744 +21 +-2.91385 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44744 +20 +-2.91385 +11 +6.44789 +21 +-2.91611 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44789 +20 +-2.91611 +11 +6.44789 +21 +-2.98107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44789 +20 +-2.98107 +11 +6.44744 +21 +-2.98333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44744 +20 +-2.98333 +11 +6.44616 +21 +-2.98525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44616 +20 +-2.98525 +11 +6.44424 +21 +-2.98653 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44424 +20 +-2.98653 +11 +6.44198 +21 +-2.98698 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44198 +20 +-2.98698 +11 +6.43017 +21 +-2.98698 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43017 +20 +-2.98698 +11 +6.42791 +21 +-2.98653 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42791 +20 +-2.98653 +11 +6.42599 +21 +-2.98525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42599 +20 +-2.98525 +11 +6.42471 +21 +-2.98333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42471 +20 +-2.98333 +11 +6.42426 +21 +-2.98107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42426 +20 +-2.98107 +11 +6.42426 +21 +-2.91611 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42426 +20 +-2.91611 +11 +6.42471 +21 +-2.91385 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42471 +20 +-2.91385 +11 +6.42599 +21 +-2.91193 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42599 +20 +-2.91193 +11 +6.42791 +21 +-2.91065 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42791 +20 +-2.91065 +11 +6.43017 +21 +-2.9102 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43017 +20 +-2.9102 +11 +6.44198 +21 +-2.9102 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44198 +20 +-2.9102 +11 +6.44424 +21 +-2.91065 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39424 +20 +-2.91065 +11 +6.39616 +21 +-2.91193 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39616 +20 +-2.91193 +11 +6.39744 +21 +-2.91385 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39744 +20 +-2.91385 +11 +6.39789 +21 +-2.91611 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39789 +20 +-2.91611 +11 +6.39789 +21 +-2.98107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39789 +20 +-2.98107 +11 +6.39744 +21 +-2.98333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39744 +20 +-2.98333 +11 +6.39616 +21 +-2.98525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39616 +20 +-2.98525 +11 +6.39424 +21 +-2.98653 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39424 +20 +-2.98653 +11 +6.39198 +21 +-2.98698 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39198 +20 +-2.98698 +11 +6.38017 +21 +-2.98698 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38017 +20 +-2.98698 +11 +6.37791 +21 +-2.98653 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37791 +20 +-2.98653 +11 +6.37599 +21 +-2.98525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37599 +20 +-2.98525 +11 +6.37471 +21 +-2.98333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37471 +20 +-2.98333 +11 +6.37426 +21 +-2.98107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37426 +20 +-2.98107 +11 +6.37426 +21 +-2.91611 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37426 +20 +-2.91611 +11 +6.37471 +21 +-2.91385 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37471 +20 +-2.91385 +11 +6.37599 +21 +-2.91193 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37599 +20 +-2.91193 +11 +6.37791 +21 +-2.91065 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37791 +20 +-2.91065 +11 +6.38017 +21 +-2.9102 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38017 +20 +-2.9102 +11 +6.39198 +21 +-2.9102 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39198 +20 +-2.9102 +11 +6.39424 +21 +-2.91065 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34424 +20 +-2.91065 +11 +6.34616 +21 +-2.91193 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34616 +20 +-2.91193 +11 +6.34744 +21 +-2.91385 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34744 +20 +-2.91385 +11 +6.34789 +21 +-2.91611 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34789 +20 +-2.91611 +11 +6.34789 +21 +-2.98107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34789 +20 +-2.98107 +11 +6.34744 +21 +-2.98333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34744 +20 +-2.98333 +11 +6.34616 +21 +-2.98525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34616 +20 +-2.98525 +11 +6.34424 +21 +-2.98653 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34424 +20 +-2.98653 +11 +6.34198 +21 +-2.98698 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34198 +20 +-2.98698 +11 +6.33017 +21 +-2.98698 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33017 +20 +-2.98698 +11 +6.32791 +21 +-2.98653 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32791 +20 +-2.98653 +11 +6.32599 +21 +-2.98525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32599 +20 +-2.98525 +11 +6.32471 +21 +-2.98333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32471 +20 +-2.98333 +11 +6.32426 +21 +-2.98107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32426 +20 +-2.98107 +11 +6.32426 +21 +-2.91611 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32426 +20 +-2.91611 +11 +6.32471 +21 +-2.91385 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32471 +20 +-2.91385 +11 +6.32599 +21 +-2.91193 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32599 +20 +-2.91193 +11 +6.32791 +21 +-2.91065 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32791 +20 +-2.91065 +11 +6.33017 +21 +-2.9102 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33017 +20 +-2.9102 +11 +6.34198 +21 +-2.9102 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34198 +20 +-2.9102 +11 +6.34424 +21 +-2.91065 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29424 +20 +-2.91065 +11 +6.29616 +21 +-2.91193 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29616 +20 +-2.91193 +11 +6.29744 +21 +-2.91385 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29744 +20 +-2.91385 +11 +6.29789 +21 +-2.91611 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29789 +20 +-2.91611 +11 +6.29789 +21 +-2.98107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29789 +20 +-2.98107 +11 +6.29744 +21 +-2.98333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29744 +20 +-2.98333 +11 +6.29616 +21 +-2.98525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29616 +20 +-2.98525 +11 +6.29424 +21 +-2.98653 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29424 +20 +-2.98653 +11 +6.29198 +21 +-2.98698 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29198 +20 +-2.98698 +11 +6.28017 +21 +-2.98698 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28017 +20 +-2.98698 +11 +6.27791 +21 +-2.98653 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27791 +20 +-2.98653 +11 +6.27599 +21 +-2.98525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27599 +20 +-2.98525 +11 +6.27471 +21 +-2.98333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27471 +20 +-2.98333 +11 +6.27426 +21 +-2.98107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27426 +20 +-2.98107 +11 +6.27426 +21 +-2.91611 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27426 +20 +-2.91611 +11 +6.27471 +21 +-2.91385 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27471 +20 +-2.91385 +11 +6.27599 +21 +-2.91193 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27599 +20 +-2.91193 +11 +6.27791 +21 +-2.91065 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27791 +20 +-2.91065 +11 +6.28017 +21 +-2.9102 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28017 +20 +-2.9102 +11 +6.29198 +21 +-2.9102 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29198 +20 +-2.9102 +11 +6.29424 +21 +-2.91065 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24424 +20 +-2.91065 +11 +6.24616 +21 +-2.91193 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24616 +20 +-2.91193 +11 +6.24744 +21 +-2.91385 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24744 +20 +-2.91385 +11 +6.24789 +21 +-2.91611 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24789 +20 +-2.91611 +11 +6.24789 +21 +-2.98107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24789 +20 +-2.98107 +11 +6.24744 +21 +-2.98333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24744 +20 +-2.98333 +11 +6.24616 +21 +-2.98525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24616 +20 +-2.98525 +11 +6.24424 +21 +-2.98653 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24424 +20 +-2.98653 +11 +6.24198 +21 +-2.98698 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24198 +20 +-2.98698 +11 +6.23017 +21 +-2.98698 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23017 +20 +-2.98698 +11 +6.22791 +21 +-2.98653 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22791 +20 +-2.98653 +11 +6.22599 +21 +-2.98525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22599 +20 +-2.98525 +11 +6.22471 +21 +-2.98333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22471 +20 +-2.98333 +11 +6.22426 +21 +-2.98107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22426 +20 +-2.98107 +11 +6.22426 +21 +-2.91611 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22426 +20 +-2.91611 +11 +6.22471 +21 +-2.91385 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22471 +20 +-2.91385 +11 +6.22599 +21 +-2.91193 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22599 +20 +-2.91193 +11 +6.22791 +21 +-2.91065 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22791 +20 +-2.91065 +11 +6.23017 +21 +-2.9102 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23017 +20 +-2.9102 +11 +6.24198 +21 +-2.9102 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24198 +20 +-2.9102 +11 +6.24424 +21 +-2.91065 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19424 +20 +-2.91065 +11 +6.19616 +21 +-2.91193 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19616 +20 +-2.91193 +11 +6.19744 +21 +-2.91385 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19744 +20 +-2.91385 +11 +6.19789 +21 +-2.91611 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19789 +20 +-2.91611 +11 +6.19789 +21 +-2.98107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19789 +20 +-2.98107 +11 +6.19744 +21 +-2.98333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19744 +20 +-2.98333 +11 +6.19616 +21 +-2.98525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19616 +20 +-2.98525 +11 +6.19424 +21 +-2.98653 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19424 +20 +-2.98653 +11 +6.19198 +21 +-2.98698 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19198 +20 +-2.98698 +11 +6.18017 +21 +-2.98698 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18017 +20 +-2.98698 +11 +6.17791 +21 +-2.98653 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17791 +20 +-2.98653 +11 +6.17599 +21 +-2.98525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17599 +20 +-2.98525 +11 +6.17471 +21 +-2.98333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17471 +20 +-2.98333 +11 +6.17426 +21 +-2.98107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17426 +20 +-2.98107 +11 +6.17426 +21 +-2.91611 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17426 +20 +-2.91611 +11 +6.17471 +21 +-2.91385 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17471 +20 +-2.91385 +11 +6.17599 +21 +-2.91193 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17599 +20 +-2.91193 +11 +6.17791 +21 +-2.91065 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17791 +20 +-2.91065 +11 +6.18017 +21 +-2.9102 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18017 +20 +-2.9102 +11 +6.19198 +21 +-2.9102 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19198 +20 +-2.9102 +11 +6.19424 +21 +-2.91065 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90318 +20 +-2.89894 +11 +5.90637 +21 +-2.90107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90637 +20 +-2.90107 +11 +5.9085 +21 +-2.90426 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9085 +20 +-2.90426 +11 +5.90925 +21 +-2.90803 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90925 +20 +-2.90803 +11 +5.90925 +21 +-2.94346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90925 +20 +-2.94346 +11 +5.9085 +21 +-2.94723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9085 +20 +-2.94723 +11 +5.90637 +21 +-2.95042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90637 +20 +-2.95042 +11 +5.90318 +21 +-2.95256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90318 +20 +-2.95256 +11 +5.89941 +21 +-2.95331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89941 +20 +-2.95331 +11 +5.87874 +21 +-2.95331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87874 +20 +-2.95331 +11 +5.87497 +21 +-2.95256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87497 +20 +-2.95256 +11 +5.87178 +21 +-2.95042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87178 +20 +-2.95042 +11 +5.86965 +21 +-2.94723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86965 +20 +-2.94723 +11 +5.8689 +21 +-2.94346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8689 +20 +-2.94346 +11 +5.8689 +21 +-2.90803 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8689 +20 +-2.90803 +11 +5.86965 +21 +-2.90426 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86965 +20 +-2.90426 +11 +5.87178 +21 +-2.90107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87178 +20 +-2.90107 +11 +5.87497 +21 +-2.89894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87497 +20 +-2.89894 +11 +5.87874 +21 +-2.89819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87874 +20 +-2.89819 +11 +5.89941 +21 +-2.89819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89941 +20 +-2.89819 +11 +5.90318 +21 +-2.89894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83133 +20 +-2.89894 +11 +5.83452 +21 +-2.90107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83452 +20 +-2.90107 +11 +5.83665 +21 +-2.90426 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83665 +20 +-2.90426 +11 +5.8374 +21 +-2.90803 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8374 +20 +-2.90803 +11 +5.8374 +21 +-2.94346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8374 +20 +-2.94346 +11 +5.83665 +21 +-2.94723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83665 +20 +-2.94723 +11 +5.83452 +21 +-2.95042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83452 +20 +-2.95042 +11 +5.83133 +21 +-2.95256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83133 +20 +-2.95256 +11 +5.82756 +21 +-2.95331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82756 +20 +-2.95331 +11 +5.80689 +21 +-2.95331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80689 +20 +-2.95331 +11 +5.80312 +21 +-2.95256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80312 +20 +-2.95256 +11 +5.79993 +21 +-2.95042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79993 +20 +-2.95042 +11 +5.7978 +21 +-2.94723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7978 +20 +-2.94723 +11 +5.79705 +21 +-2.94346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79705 +20 +-2.94346 +11 +5.79705 +21 +-2.90803 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79705 +20 +-2.90803 +11 +5.7978 +21 +-2.90426 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7978 +20 +-2.90426 +11 +5.79993 +21 +-2.90107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79993 +20 +-2.90107 +11 +5.80312 +21 +-2.89894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80312 +20 +-2.89894 +11 +5.80689 +21 +-2.89819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80689 +20 +-2.89819 +11 +5.82756 +21 +-2.89819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82756 +20 +-2.89819 +11 +5.83133 +21 +-2.89894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71003 +20 +-2.87319 +11 +5.71322 +21 +-2.87532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71322 +20 +-2.87532 +11 +5.71535 +21 +-2.87852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71535 +20 +-2.87852 +11 +5.7161 +21 +-2.88228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7161 +20 +-2.88228 +11 +5.7161 +21 +-2.91772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7161 +20 +-2.91772 +11 +5.71535 +21 +-2.92148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71535 +20 +-2.92148 +11 +5.71322 +21 +-2.92468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71322 +20 +-2.92468 +11 +5.71003 +21 +-2.92681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71003 +20 +-2.92681 +11 +5.70626 +21 +-2.92756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70626 +20 +-2.92756 +11 +5.68559 +21 +-2.92756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68559 +20 +-2.92756 +11 +5.68182 +21 +-2.92681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68182 +20 +-2.92681 +11 +5.67863 +21 +-2.92468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67863 +20 +-2.92468 +11 +5.6765 +21 +-2.92148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6765 +20 +-2.92148 +11 +5.67575 +21 +-2.91772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67575 +20 +-2.91772 +11 +5.67575 +21 +-2.88228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67575 +20 +-2.88228 +11 +5.6765 +21 +-2.87852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6765 +20 +-2.87852 +11 +5.67863 +21 +-2.87532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67863 +20 +-2.87532 +11 +5.68182 +21 +-2.87319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68182 +20 +-2.87319 +11 +5.68559 +21 +-2.87244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68559 +20 +-2.87244 +11 +5.70626 +21 +-2.87244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70626 +20 +-2.87244 +11 +5.71003 +21 +-2.87319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63818 +20 +-2.87319 +11 +5.64137 +21 +-2.87532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64137 +20 +-2.87532 +11 +5.6435 +21 +-2.87852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6435 +20 +-2.87852 +11 +5.64425 +21 +-2.88228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64425 +20 +-2.88228 +11 +5.64425 +21 +-2.91772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64425 +20 +-2.91772 +11 +5.6435 +21 +-2.92148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6435 +20 +-2.92148 +11 +5.64137 +21 +-2.92468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64137 +20 +-2.92468 +11 +5.63818 +21 +-2.92681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63818 +20 +-2.92681 +11 +5.63441 +21 +-2.92756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63441 +20 +-2.92756 +11 +5.61374 +21 +-2.92756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61374 +20 +-2.92756 +11 +5.60997 +21 +-2.92681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60997 +20 +-2.92681 +11 +5.60678 +21 +-2.92468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60678 +20 +-2.92468 +11 +5.60465 +21 +-2.92148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60465 +20 +-2.92148 +11 +5.6039 +21 +-2.91772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6039 +20 +-2.91772 +11 +5.6039 +21 +-2.88228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6039 +20 +-2.88228 +11 +5.60465 +21 +-2.87852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60465 +20 +-2.87852 +11 +5.60678 +21 +-2.87532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60678 +20 +-2.87532 +11 +5.60997 +21 +-2.87319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60997 +20 +-2.87319 +11 +5.61374 +21 +-2.87244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61374 +20 +-2.87244 +11 +5.63441 +21 +-2.87244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63441 +20 +-2.87244 +11 +5.63818 +21 +-2.87319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57503 +20 +-2.87319 +11 +5.57822 +21 +-2.87532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57822 +20 +-2.87532 +11 +5.58035 +21 +-2.87852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.58035 +20 +-2.87852 +11 +5.5811 +21 +-2.88228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5811 +20 +-2.88228 +11 +5.5811 +21 +-2.91772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5811 +20 +-2.91772 +11 +5.58035 +21 +-2.92148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.58035 +20 +-2.92148 +11 +5.57822 +21 +-2.92468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57822 +20 +-2.92468 +11 +5.57503 +21 +-2.92681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57503 +20 +-2.92681 +11 +5.57126 +21 +-2.92756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57126 +20 +-2.92756 +11 +5.55059 +21 +-2.92756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55059 +20 +-2.92756 +11 +5.54682 +21 +-2.92681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54682 +20 +-2.92681 +11 +5.54363 +21 +-2.92468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54363 +20 +-2.92468 +11 +5.5415 +21 +-2.92148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5415 +20 +-2.92148 +11 +5.54075 +21 +-2.91772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54075 +20 +-2.91772 +11 +5.54075 +21 +-2.88228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54075 +20 +-2.88228 +11 +5.5415 +21 +-2.87852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5415 +20 +-2.87852 +11 +5.54363 +21 +-2.87532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54363 +20 +-2.87532 +11 +5.54682 +21 +-2.87319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54682 +20 +-2.87319 +11 +5.55059 +21 +-2.87244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55059 +20 +-2.87244 +11 +5.57126 +21 +-2.87244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57126 +20 +-2.87244 +11 +5.57503 +21 +-2.87319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50318 +20 +-2.87319 +11 +5.50637 +21 +-2.87532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50637 +20 +-2.87532 +11 +5.5085 +21 +-2.87852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5085 +20 +-2.87852 +11 +5.50925 +21 +-2.88228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50925 +20 +-2.88228 +11 +5.50925 +21 +-2.91772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50925 +20 +-2.91772 +11 +5.5085 +21 +-2.92148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5085 +20 +-2.92148 +11 +5.50637 +21 +-2.92468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50637 +20 +-2.92468 +11 +5.50318 +21 +-2.92681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50318 +20 +-2.92681 +11 +5.49941 +21 +-2.92756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49941 +20 +-2.92756 +11 +5.47874 +21 +-2.92756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47874 +20 +-2.92756 +11 +5.47497 +21 +-2.92681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47497 +20 +-2.92681 +11 +5.47178 +21 +-2.92468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47178 +20 +-2.92468 +11 +5.46965 +21 +-2.92148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.46965 +20 +-2.92148 +11 +5.4689 +21 +-2.91772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4689 +20 +-2.91772 +11 +5.4689 +21 +-2.88228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4689 +20 +-2.88228 +11 +5.46965 +21 +-2.87852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.46965 +20 +-2.87852 +11 +5.47178 +21 +-2.87532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47178 +20 +-2.87532 +11 +5.47497 +21 +-2.87319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47497 +20 +-2.87319 +11 +5.47874 +21 +-2.87244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47874 +20 +-2.87244 +11 +5.49941 +21 +-2.87244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49941 +20 +-2.87244 +11 +5.50318 +21 +-2.87319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4391 +20 +-2.87319 +11 +5.44229 +21 +-2.87532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44229 +20 +-2.87532 +11 +5.44443 +21 +-2.87852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44443 +20 +-2.87852 +11 +5.44518 +21 +-2.88228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44518 +20 +-2.88228 +11 +5.44518 +21 +-2.91772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44518 +20 +-2.91772 +11 +5.44443 +21 +-2.92148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44443 +20 +-2.92148 +11 +5.44229 +21 +-2.92468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44229 +20 +-2.92468 +11 +5.4391 +21 +-2.92681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4391 +20 +-2.92681 +11 +5.43533 +21 +-2.92756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43533 +20 +-2.92756 +11 +5.41467 +21 +-2.92756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41467 +20 +-2.92756 +11 +5.4109 +21 +-2.92681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4109 +20 +-2.92681 +11 +5.40771 +21 +-2.92468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40771 +20 +-2.92468 +11 +5.40557 +21 +-2.92148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40557 +20 +-2.92148 +11 +5.40482 +21 +-2.91772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40482 +20 +-2.91772 +11 +5.40482 +21 +-2.88228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40482 +20 +-2.88228 +11 +5.40557 +21 +-2.87852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40557 +20 +-2.87852 +11 +5.40771 +21 +-2.87532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40771 +20 +-2.87532 +11 +5.4109 +21 +-2.87319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4109 +20 +-2.87319 +11 +5.41467 +21 +-2.87244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41467 +20 +-2.87244 +11 +5.43533 +21 +-2.87244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43533 +20 +-2.87244 +11 +5.4391 +21 +-2.87319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36725 +20 +-2.87319 +11 +5.37044 +21 +-2.87532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37044 +20 +-2.87532 +11 +5.37258 +21 +-2.87852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37258 +20 +-2.87852 +11 +5.37333 +21 +-2.88228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37333 +20 +-2.88228 +11 +5.37333 +21 +-2.91772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37333 +20 +-2.91772 +11 +5.37258 +21 +-2.92148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37258 +20 +-2.92148 +11 +5.37044 +21 +-2.92468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37044 +20 +-2.92468 +11 +5.36725 +21 +-2.92681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36725 +20 +-2.92681 +11 +5.36348 +21 +-2.92756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36348 +20 +-2.92756 +11 +5.34281 +21 +-2.92756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34281 +20 +-2.92756 +11 +5.33905 +21 +-2.92681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33905 +20 +-2.92681 +11 +5.33586 +21 +-2.92468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33586 +20 +-2.92468 +11 +5.33372 +21 +-2.92148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33372 +20 +-2.92148 +11 +5.33297 +21 +-2.91772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33297 +20 +-2.91772 +11 +5.33297 +21 +-2.88228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33297 +20 +-2.88228 +11 +5.33372 +21 +-2.87852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33372 +20 +-2.87852 +11 +5.33586 +21 +-2.87532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33586 +20 +-2.87532 +11 +5.33905 +21 +-2.87319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33905 +20 +-2.87319 +11 +5.34281 +21 +-2.87244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34281 +20 +-2.87244 +11 +5.36348 +21 +-2.87244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36348 +20 +-2.87244 +11 +5.36725 +21 +-2.87319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57568 +20 +-2.884 +11 +6.57888 +21 +-2.88613 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57888 +20 +-2.88613 +11 +6.58101 +21 +-2.88933 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58101 +20 +-2.88933 +11 +6.58176 +21 +-2.89309 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58176 +20 +-2.89309 +11 +6.58176 +21 +-2.91278 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58176 +20 +-2.91278 +11 +6.58101 +21 +-2.91655 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58101 +20 +-2.91655 +11 +6.57888 +21 +-2.91974 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57888 +20 +-2.91974 +11 +6.57568 +21 +-2.92187 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57568 +20 +-2.92187 +11 +6.57192 +21 +-2.92262 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57192 +20 +-2.92262 +11 +6.55223 +21 +-2.92262 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55223 +20 +-2.92262 +11 +6.54847 +21 +-2.92187 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54847 +20 +-2.92187 +11 +6.54527 +21 +-2.91974 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54527 +20 +-2.91974 +11 +6.54314 +21 +-2.91655 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54314 +20 +-2.91655 +11 +6.54239 +21 +-2.91278 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54239 +20 +-2.91278 +11 +6.54239 +21 +-2.89309 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54239 +20 +-2.89309 +11 +6.54314 +21 +-2.88933 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54314 +20 +-2.88933 +11 +6.54527 +21 +-2.88613 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54527 +20 +-2.88613 +11 +6.54847 +21 +-2.884 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54847 +20 +-2.884 +11 +6.55223 +21 +-2.88325 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55223 +20 +-2.88325 +11 +6.57192 +21 +-2.88325 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57192 +20 +-2.88325 +11 +6.57568 +21 +-2.884 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71148 +20 +-2.8115 +11 +5.71468 +21 +-2.81363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71468 +20 +-2.81363 +11 +5.71681 +21 +-2.81682 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71681 +20 +-2.81682 +11 +5.71756 +21 +-2.82059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71756 +20 +-2.82059 +11 +5.71756 +21 +-2.84126 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71756 +20 +-2.84126 +11 +5.71681 +21 +-2.84503 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71681 +20 +-2.84503 +11 +5.71468 +21 +-2.84822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71468 +20 +-2.84822 +11 +5.71148 +21 +-2.85035 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71148 +20 +-2.85035 +11 +5.70772 +21 +-2.8511 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70772 +20 +-2.8511 +11 +5.67228 +21 +-2.8511 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67228 +20 +-2.8511 +11 +5.66852 +21 +-2.85035 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66852 +20 +-2.85035 +11 +5.66532 +21 +-2.84822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66532 +20 +-2.84822 +11 +5.66319 +21 +-2.84503 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66319 +20 +-2.84503 +11 +5.66244 +21 +-2.84126 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66244 +20 +-2.84126 +11 +5.66244 +21 +-2.82059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66244 +20 +-2.82059 +11 +5.66319 +21 +-2.81682 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66319 +20 +-2.81682 +11 +5.66532 +21 +-2.81363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66532 +20 +-2.81363 +11 +5.66852 +21 +-2.8115 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66852 +20 +-2.8115 +11 +5.67228 +21 +-2.81075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67228 +20 +-2.81075 +11 +5.70772 +21 +-2.81075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70772 +20 +-2.81075 +11 +5.71148 +21 +-2.8115 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38148 +20 +-2.8115 +11 +5.38468 +21 +-2.81363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38468 +20 +-2.81363 +11 +5.38681 +21 +-2.81682 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38681 +20 +-2.81682 +11 +5.38756 +21 +-2.82059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38756 +20 +-2.82059 +11 +5.38756 +21 +-2.84126 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38756 +20 +-2.84126 +11 +5.38681 +21 +-2.84503 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38681 +20 +-2.84503 +11 +5.38468 +21 +-2.84822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38468 +20 +-2.84822 +11 +5.38148 +21 +-2.85035 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38148 +20 +-2.85035 +11 +5.37772 +21 +-2.8511 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37772 +20 +-2.8511 +11 +5.34228 +21 +-2.8511 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34228 +20 +-2.8511 +11 +5.33852 +21 +-2.85035 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33852 +20 +-2.85035 +11 +5.33532 +21 +-2.84822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33532 +20 +-2.84822 +11 +5.33319 +21 +-2.84503 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33319 +20 +-2.84503 +11 +5.33244 +21 +-2.84126 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33244 +20 +-2.84126 +11 +5.33244 +21 +-2.82059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33244 +20 +-2.82059 +11 +5.33319 +21 +-2.81682 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33319 +20 +-2.81682 +11 +5.33532 +21 +-2.81363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33532 +20 +-2.81363 +11 +5.33852 +21 +-2.8115 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33852 +20 +-2.8115 +11 +5.34228 +21 +-2.81075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34228 +20 +-2.81075 +11 +5.37772 +21 +-2.81075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37772 +20 +-2.81075 +11 +5.38148 +21 +-2.8115 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57954 +20 +-2.81162 +11 +6.58274 +21 +-2.81375 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58274 +20 +-2.81375 +11 +6.58487 +21 +-2.81694 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58487 +20 +-2.81694 +11 +6.58562 +21 +-2.82071 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58562 +20 +-2.82071 +11 +6.58562 +21 +-2.84039 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58562 +20 +-2.84039 +11 +6.58487 +21 +-2.84416 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58487 +20 +-2.84416 +11 +6.58274 +21 +-2.84735 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58274 +20 +-2.84735 +11 +6.57954 +21 +-2.84949 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57954 +20 +-2.84949 +11 +6.57578 +21 +-2.85024 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57578 +20 +-2.85024 +11 +6.53837 +21 +-2.85024 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53837 +20 +-2.85024 +11 +6.53461 +21 +-2.84949 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53461 +20 +-2.84949 +11 +6.53141 +21 +-2.84735 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53141 +20 +-2.84735 +11 +6.52928 +21 +-2.84416 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52928 +20 +-2.84416 +11 +6.52853 +21 +-2.84039 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52853 +20 +-2.84039 +11 +6.52853 +21 +-2.82071 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52853 +20 +-2.82071 +11 +6.52928 +21 +-2.81694 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52928 +20 +-2.81694 +11 +6.53141 +21 +-2.81375 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53141 +20 +-2.81375 +11 +6.53461 +21 +-2.81162 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53461 +20 +-2.81162 +11 +6.53837 +21 +-2.81087 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53837 +20 +-2.81087 +11 +6.57578 +21 +-2.81087 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57578 +20 +-2.81087 +11 +6.57954 +21 +-2.81162 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13854 +20 +-2.80862 +11 +6.14174 +21 +-2.81075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14174 +20 +-2.81075 +11 +6.14387 +21 +-2.81394 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14387 +20 +-2.81394 +11 +6.14462 +21 +-2.81771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14462 +20 +-2.81771 +11 +6.14462 +21 +-2.83739 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14462 +20 +-2.83739 +11 +6.14387 +21 +-2.84116 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14387 +20 +-2.84116 +11 +6.14174 +21 +-2.84435 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14174 +20 +-2.84435 +11 +6.13854 +21 +-2.84649 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13854 +20 +-2.84649 +11 +6.13478 +21 +-2.84724 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13478 +20 +-2.84724 +11 +6.09737 +21 +-2.84724 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09737 +20 +-2.84724 +11 +6.09361 +21 +-2.84649 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09361 +20 +-2.84649 +11 +6.09041 +21 +-2.84435 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09041 +20 +-2.84435 +11 +6.08828 +21 +-2.84116 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08828 +20 +-2.84116 +11 +6.08753 +21 +-2.83739 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08753 +20 +-2.83739 +11 +6.08753 +21 +-2.81771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08753 +20 +-2.81771 +11 +6.08828 +21 +-2.81394 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08828 +20 +-2.81394 +11 +6.09041 +21 +-2.81075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09041 +20 +-2.81075 +11 +6.09361 +21 +-2.80862 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09361 +20 +-2.80862 +11 +6.09737 +21 +-2.80787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09737 +20 +-2.80787 +11 +6.13478 +21 +-2.80787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13478 +20 +-2.80787 +11 +6.13854 +21 +-2.80862 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49424 +20 +-2.71577 +11 +6.49616 +21 +-2.71705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49616 +20 +-2.71705 +11 +6.49744 +21 +-2.71897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49744 +20 +-2.71897 +11 +6.49789 +21 +-2.72123 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49789 +20 +-2.72123 +11 +6.49789 +21 +-2.78619 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49789 +20 +-2.78619 +11 +6.49744 +21 +-2.78845 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49744 +20 +-2.78845 +11 +6.49616 +21 +-2.79036 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49616 +20 +-2.79036 +11 +6.49424 +21 +-2.79164 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49424 +20 +-2.79164 +11 +6.49198 +21 +-2.79209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49198 +20 +-2.79209 +11 +6.48017 +21 +-2.79209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48017 +20 +-2.79209 +11 +6.47791 +21 +-2.79164 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47791 +20 +-2.79164 +11 +6.47599 +21 +-2.79036 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47599 +20 +-2.79036 +11 +6.47471 +21 +-2.78845 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47471 +20 +-2.78845 +11 +6.47426 +21 +-2.78619 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47426 +20 +-2.78619 +11 +6.47426 +21 +-2.72123 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47426 +20 +-2.72123 +11 +6.47471 +21 +-2.71897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47471 +20 +-2.71897 +11 +6.47599 +21 +-2.71705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47599 +20 +-2.71705 +11 +6.47791 +21 +-2.71577 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47791 +20 +-2.71577 +11 +6.48017 +21 +-2.71532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48017 +20 +-2.71532 +11 +6.49198 +21 +-2.71532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49198 +20 +-2.71532 +11 +6.49424 +21 +-2.71577 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44424 +20 +-2.71577 +11 +6.44616 +21 +-2.71705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44616 +20 +-2.71705 +11 +6.44744 +21 +-2.71897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44744 +20 +-2.71897 +11 +6.44789 +21 +-2.72123 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44789 +20 +-2.72123 +11 +6.44789 +21 +-2.78619 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44789 +20 +-2.78619 +11 +6.44744 +21 +-2.78845 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44744 +20 +-2.78845 +11 +6.44616 +21 +-2.79036 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44616 +20 +-2.79036 +11 +6.44424 +21 +-2.79164 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44424 +20 +-2.79164 +11 +6.44198 +21 +-2.79209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44198 +20 +-2.79209 +11 +6.43017 +21 +-2.79209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43017 +20 +-2.79209 +11 +6.42791 +21 +-2.79164 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42791 +20 +-2.79164 +11 +6.42599 +21 +-2.79036 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42599 +20 +-2.79036 +11 +6.42471 +21 +-2.78845 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42471 +20 +-2.78845 +11 +6.42426 +21 +-2.78619 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42426 +20 +-2.78619 +11 +6.42426 +21 +-2.72123 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42426 +20 +-2.72123 +11 +6.42471 +21 +-2.71897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42471 +20 +-2.71897 +11 +6.42599 +21 +-2.71705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42599 +20 +-2.71705 +11 +6.42791 +21 +-2.71577 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42791 +20 +-2.71577 +11 +6.43017 +21 +-2.71532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43017 +20 +-2.71532 +11 +6.44198 +21 +-2.71532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44198 +20 +-2.71532 +11 +6.44424 +21 +-2.71577 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39424 +20 +-2.71577 +11 +6.39616 +21 +-2.71705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39616 +20 +-2.71705 +11 +6.39744 +21 +-2.71897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39744 +20 +-2.71897 +11 +6.39789 +21 +-2.72123 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39789 +20 +-2.72123 +11 +6.39789 +21 +-2.78619 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39789 +20 +-2.78619 +11 +6.39744 +21 +-2.78845 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39744 +20 +-2.78845 +11 +6.39616 +21 +-2.79036 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39616 +20 +-2.79036 +11 +6.39424 +21 +-2.79164 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39424 +20 +-2.79164 +11 +6.39198 +21 +-2.79209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39198 +20 +-2.79209 +11 +6.38017 +21 +-2.79209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38017 +20 +-2.79209 +11 +6.37791 +21 +-2.79164 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37791 +20 +-2.79164 +11 +6.37599 +21 +-2.79036 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37599 +20 +-2.79036 +11 +6.37471 +21 +-2.78845 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37471 +20 +-2.78845 +11 +6.37426 +21 +-2.78619 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37426 +20 +-2.78619 +11 +6.37426 +21 +-2.72123 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37426 +20 +-2.72123 +11 +6.37471 +21 +-2.71897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37471 +20 +-2.71897 +11 +6.37599 +21 +-2.71705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37599 +20 +-2.71705 +11 +6.37791 +21 +-2.71577 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37791 +20 +-2.71577 +11 +6.38017 +21 +-2.71532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38017 +20 +-2.71532 +11 +6.39198 +21 +-2.71532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39198 +20 +-2.71532 +11 +6.39424 +21 +-2.71577 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34424 +20 +-2.71577 +11 +6.34616 +21 +-2.71705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34616 +20 +-2.71705 +11 +6.34744 +21 +-2.71897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34744 +20 +-2.71897 +11 +6.34789 +21 +-2.72123 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34789 +20 +-2.72123 +11 +6.34789 +21 +-2.78619 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34789 +20 +-2.78619 +11 +6.34744 +21 +-2.78845 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34744 +20 +-2.78845 +11 +6.34616 +21 +-2.79036 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34616 +20 +-2.79036 +11 +6.34424 +21 +-2.79164 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34424 +20 +-2.79164 +11 +6.34198 +21 +-2.79209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34198 +20 +-2.79209 +11 +6.33017 +21 +-2.79209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33017 +20 +-2.79209 +11 +6.32791 +21 +-2.79164 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32791 +20 +-2.79164 +11 +6.32599 +21 +-2.79036 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32599 +20 +-2.79036 +11 +6.32471 +21 +-2.78845 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32471 +20 +-2.78845 +11 +6.32426 +21 +-2.78619 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32426 +20 +-2.78619 +11 +6.32426 +21 +-2.72123 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32426 +20 +-2.72123 +11 +6.32471 +21 +-2.71897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32471 +20 +-2.71897 +11 +6.32599 +21 +-2.71705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32599 +20 +-2.71705 +11 +6.32791 +21 +-2.71577 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32791 +20 +-2.71577 +11 +6.33017 +21 +-2.71532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33017 +20 +-2.71532 +11 +6.34198 +21 +-2.71532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34198 +20 +-2.71532 +11 +6.34424 +21 +-2.71577 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29424 +20 +-2.71577 +11 +6.29616 +21 +-2.71705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29616 +20 +-2.71705 +11 +6.29744 +21 +-2.71897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29744 +20 +-2.71897 +11 +6.29789 +21 +-2.72123 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29789 +20 +-2.72123 +11 +6.29789 +21 +-2.78619 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29789 +20 +-2.78619 +11 +6.29744 +21 +-2.78845 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29744 +20 +-2.78845 +11 +6.29616 +21 +-2.79036 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29616 +20 +-2.79036 +11 +6.29424 +21 +-2.79164 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29424 +20 +-2.79164 +11 +6.29198 +21 +-2.79209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29198 +20 +-2.79209 +11 +6.28017 +21 +-2.79209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28017 +20 +-2.79209 +11 +6.27791 +21 +-2.79164 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27791 +20 +-2.79164 +11 +6.27599 +21 +-2.79036 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27599 +20 +-2.79036 +11 +6.27471 +21 +-2.78845 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27471 +20 +-2.78845 +11 +6.27426 +21 +-2.78619 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27426 +20 +-2.78619 +11 +6.27426 +21 +-2.72123 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27426 +20 +-2.72123 +11 +6.27471 +21 +-2.71897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27471 +20 +-2.71897 +11 +6.27599 +21 +-2.71705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27599 +20 +-2.71705 +11 +6.27791 +21 +-2.71577 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27791 +20 +-2.71577 +11 +6.28017 +21 +-2.71532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28017 +20 +-2.71532 +11 +6.29198 +21 +-2.71532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29198 +20 +-2.71532 +11 +6.29424 +21 +-2.71577 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24424 +20 +-2.71577 +11 +6.24616 +21 +-2.71705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24616 +20 +-2.71705 +11 +6.24744 +21 +-2.71897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24744 +20 +-2.71897 +11 +6.24789 +21 +-2.72123 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24789 +20 +-2.72123 +11 +6.24789 +21 +-2.78619 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24789 +20 +-2.78619 +11 +6.24744 +21 +-2.78845 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24744 +20 +-2.78845 +11 +6.24616 +21 +-2.79036 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24616 +20 +-2.79036 +11 +6.24424 +21 +-2.79164 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24424 +20 +-2.79164 +11 +6.24198 +21 +-2.79209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24198 +20 +-2.79209 +11 +6.23017 +21 +-2.79209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23017 +20 +-2.79209 +11 +6.22791 +21 +-2.79164 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22791 +20 +-2.79164 +11 +6.22599 +21 +-2.79036 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22599 +20 +-2.79036 +11 +6.22471 +21 +-2.78845 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22471 +20 +-2.78845 +11 +6.22426 +21 +-2.78619 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22426 +20 +-2.78619 +11 +6.22426 +21 +-2.72123 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22426 +20 +-2.72123 +11 +6.22471 +21 +-2.71897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22471 +20 +-2.71897 +11 +6.22599 +21 +-2.71705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22599 +20 +-2.71705 +11 +6.22791 +21 +-2.71577 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22791 +20 +-2.71577 +11 +6.23017 +21 +-2.71532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23017 +20 +-2.71532 +11 +6.24198 +21 +-2.71532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24198 +20 +-2.71532 +11 +6.24424 +21 +-2.71577 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19424 +20 +-2.71577 +11 +6.19616 +21 +-2.71705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19616 +20 +-2.71705 +11 +6.19744 +21 +-2.71897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19744 +20 +-2.71897 +11 +6.19789 +21 +-2.72123 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19789 +20 +-2.72123 +11 +6.19789 +21 +-2.78619 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19789 +20 +-2.78619 +11 +6.19744 +21 +-2.78845 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19744 +20 +-2.78845 +11 +6.19616 +21 +-2.79036 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19616 +20 +-2.79036 +11 +6.19424 +21 +-2.79164 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19424 +20 +-2.79164 +11 +6.19198 +21 +-2.79209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19198 +20 +-2.79209 +11 +6.18017 +21 +-2.79209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18017 +20 +-2.79209 +11 +6.17791 +21 +-2.79164 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17791 +20 +-2.79164 +11 +6.17599 +21 +-2.79036 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17599 +20 +-2.79036 +11 +6.17471 +21 +-2.78845 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17471 +20 +-2.78845 +11 +6.17426 +21 +-2.78619 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17426 +20 +-2.78619 +11 +6.17426 +21 +-2.72123 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17426 +20 +-2.72123 +11 +6.17471 +21 +-2.71897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17471 +20 +-2.71897 +11 +6.17599 +21 +-2.71705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17599 +20 +-2.71705 +11 +6.17791 +21 +-2.71577 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17791 +20 +-2.71577 +11 +6.18017 +21 +-2.71532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18017 +20 +-2.71532 +11 +6.19198 +21 +-2.71532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19198 +20 +-2.71532 +11 +6.19424 +21 +-2.71577 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71148 +20 +-2.73965 +11 +5.71468 +21 +-2.74178 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71468 +20 +-2.74178 +11 +5.71681 +21 +-2.74497 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71681 +20 +-2.74497 +11 +5.71756 +21 +-2.74874 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71756 +20 +-2.74874 +11 +5.71756 +21 +-2.76941 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71756 +20 +-2.76941 +11 +5.71681 +21 +-2.77318 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71681 +20 +-2.77318 +11 +5.71468 +21 +-2.77637 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71468 +20 +-2.77637 +11 +5.71148 +21 +-2.7785 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71148 +20 +-2.7785 +11 +5.70772 +21 +-2.77925 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70772 +20 +-2.77925 +11 +5.67228 +21 +-2.77925 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67228 +20 +-2.77925 +11 +5.66852 +21 +-2.7785 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66852 +20 +-2.7785 +11 +5.66532 +21 +-2.77637 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66532 +20 +-2.77637 +11 +5.66319 +21 +-2.77318 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66319 +20 +-2.77318 +11 +5.66244 +21 +-2.76941 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66244 +20 +-2.76941 +11 +5.66244 +21 +-2.74874 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66244 +20 +-2.74874 +11 +5.66319 +21 +-2.74497 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66319 +20 +-2.74497 +11 +5.66532 +21 +-2.74178 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66532 +20 +-2.74178 +11 +5.66852 +21 +-2.73965 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66852 +20 +-2.73965 +11 +5.67228 +21 +-2.7389 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67228 +20 +-2.7389 +11 +5.70772 +21 +-2.7389 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70772 +20 +-2.7389 +11 +5.71148 +21 +-2.73965 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38148 +20 +-2.73965 +11 +5.38468 +21 +-2.74178 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38468 +20 +-2.74178 +11 +5.38681 +21 +-2.74497 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38681 +20 +-2.74497 +11 +5.38756 +21 +-2.74874 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38756 +20 +-2.74874 +11 +5.38756 +21 +-2.76941 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38756 +20 +-2.76941 +11 +5.38681 +21 +-2.77318 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38681 +20 +-2.77318 +11 +5.38468 +21 +-2.77637 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38468 +20 +-2.77637 +11 +5.38148 +21 +-2.7785 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38148 +20 +-2.7785 +11 +5.37772 +21 +-2.77925 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37772 +20 +-2.77925 +11 +5.34228 +21 +-2.77925 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34228 +20 +-2.77925 +11 +5.33852 +21 +-2.7785 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33852 +20 +-2.7785 +11 +5.33532 +21 +-2.77637 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33532 +20 +-2.77637 +11 +5.33319 +21 +-2.77318 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33319 +20 +-2.77318 +11 +5.33244 +21 +-2.76941 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33244 +20 +-2.76941 +11 +5.33244 +21 +-2.74874 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33244 +20 +-2.74874 +11 +5.33319 +21 +-2.74497 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33319 +20 +-2.74497 +11 +5.33532 +21 +-2.74178 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33532 +20 +-2.74178 +11 +5.33852 +21 +-2.73965 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33852 +20 +-2.73965 +11 +5.34228 +21 +-2.7389 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34228 +20 +-2.7389 +11 +5.37772 +21 +-2.7389 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37772 +20 +-2.7389 +11 +5.38148 +21 +-2.73965 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57954 +20 +-2.73681 +11 +6.58274 +21 +-2.73895 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58274 +20 +-2.73895 +11 +6.58487 +21 +-2.74214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58487 +20 +-2.74214 +11 +6.58562 +21 +-2.74591 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58562 +20 +-2.74591 +11 +6.58562 +21 +-2.76559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58562 +20 +-2.76559 +11 +6.58487 +21 +-2.76936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58487 +20 +-2.76936 +11 +6.58274 +21 +-2.77255 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58274 +20 +-2.77255 +11 +6.57954 +21 +-2.77468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57954 +20 +-2.77468 +11 +6.57578 +21 +-2.77543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57578 +20 +-2.77543 +11 +6.53837 +21 +-2.77543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53837 +20 +-2.77543 +11 +6.53461 +21 +-2.77468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53461 +20 +-2.77468 +11 +6.53141 +21 +-2.77255 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53141 +20 +-2.77255 +11 +6.52928 +21 +-2.76936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52928 +20 +-2.76936 +11 +6.52853 +21 +-2.76559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52853 +20 +-2.76559 +11 +6.52853 +21 +-2.74591 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52853 +20 +-2.74591 +11 +6.52928 +21 +-2.74214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52928 +20 +-2.74214 +11 +6.53141 +21 +-2.73895 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53141 +20 +-2.73895 +11 +6.53461 +21 +-2.73681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53461 +20 +-2.73681 +11 +6.53837 +21 +-2.73606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53837 +20 +-2.73606 +11 +6.57578 +21 +-2.73606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57578 +20 +-2.73606 +11 +6.57954 +21 +-2.73681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13854 +20 +-2.73381 +11 +6.14174 +21 +-2.73595 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14174 +20 +-2.73595 +11 +6.14387 +21 +-2.73914 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14387 +20 +-2.73914 +11 +6.14462 +21 +-2.74291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14462 +20 +-2.74291 +11 +6.14462 +21 +-2.76259 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14462 +20 +-2.76259 +11 +6.14387 +21 +-2.76636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14387 +20 +-2.76636 +11 +6.14174 +21 +-2.76955 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14174 +20 +-2.76955 +11 +6.13854 +21 +-2.77168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13854 +20 +-2.77168 +11 +6.13478 +21 +-2.77243 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13478 +20 +-2.77243 +11 +6.09737 +21 +-2.77243 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09737 +20 +-2.77243 +11 +6.09361 +21 +-2.77168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09361 +20 +-2.77168 +11 +6.09041 +21 +-2.76955 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09041 +20 +-2.76955 +11 +6.08828 +21 +-2.76636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08828 +20 +-2.76636 +11 +6.08753 +21 +-2.76259 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08753 +20 +-2.76259 +11 +6.08753 +21 +-2.74291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08753 +20 +-2.74291 +11 +6.08828 +21 +-2.73914 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08828 +20 +-2.73914 +11 +6.09041 +21 +-2.73595 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09041 +20 +-2.73595 +11 +6.09361 +21 +-2.73381 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09361 +20 +-2.73381 +11 +6.09737 +21 +-2.73306 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09737 +20 +-2.73306 +11 +6.13478 +21 +-2.73306 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13478 +20 +-2.73306 +11 +6.13854 +21 +-2.73381 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93503 +20 +-2.70394 +11 +5.93822 +21 +-2.70607 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93822 +20 +-2.70607 +11 +5.94035 +21 +-2.70926 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94035 +20 +-2.70926 +11 +5.9411 +21 +-2.71303 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9411 +20 +-2.71303 +11 +5.9411 +21 +-2.74846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9411 +20 +-2.74846 +11 +5.94035 +21 +-2.75223 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94035 +20 +-2.75223 +11 +5.93822 +21 +-2.75542 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93822 +20 +-2.75542 +11 +5.93503 +21 +-2.75756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93503 +20 +-2.75756 +11 +5.93126 +21 +-2.75831 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93126 +20 +-2.75831 +11 +5.91059 +21 +-2.75831 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91059 +20 +-2.75831 +11 +5.90682 +21 +-2.75756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90682 +20 +-2.75756 +11 +5.90363 +21 +-2.75542 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90363 +20 +-2.75542 +11 +5.9015 +21 +-2.75223 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9015 +20 +-2.75223 +11 +5.90075 +21 +-2.74846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90075 +20 +-2.74846 +11 +5.90075 +21 +-2.71303 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90075 +20 +-2.71303 +11 +5.9015 +21 +-2.70926 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9015 +20 +-2.70926 +11 +5.90363 +21 +-2.70607 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90363 +20 +-2.70607 +11 +5.90682 +21 +-2.70394 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90682 +20 +-2.70394 +11 +5.91059 +21 +-2.70319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91059 +20 +-2.70319 +11 +5.93126 +21 +-2.70319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93126 +20 +-2.70319 +11 +5.93503 +21 +-2.70394 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86318 +20 +-2.70394 +11 +5.86637 +21 +-2.70607 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86637 +20 +-2.70607 +11 +5.8685 +21 +-2.70926 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8685 +20 +-2.70926 +11 +5.86925 +21 +-2.71303 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86925 +20 +-2.71303 +11 +5.86925 +21 +-2.74846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86925 +20 +-2.74846 +11 +5.8685 +21 +-2.75223 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8685 +20 +-2.75223 +11 +5.86637 +21 +-2.75542 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86637 +20 +-2.75542 +11 +5.86318 +21 +-2.75756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86318 +20 +-2.75756 +11 +5.85941 +21 +-2.75831 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85941 +20 +-2.75831 +11 +5.83874 +21 +-2.75831 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83874 +20 +-2.75831 +11 +5.83497 +21 +-2.75756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83497 +20 +-2.75756 +11 +5.83178 +21 +-2.75542 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83178 +20 +-2.75542 +11 +5.82965 +21 +-2.75223 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82965 +20 +-2.75223 +11 +5.8289 +21 +-2.74846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8289 +20 +-2.74846 +11 +5.8289 +21 +-2.71303 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8289 +20 +-2.71303 +11 +5.82965 +21 +-2.70926 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82965 +20 +-2.70926 +11 +5.83178 +21 +-2.70607 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83178 +20 +-2.70607 +11 +5.83497 +21 +-2.70394 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83497 +20 +-2.70394 +11 +5.83874 +21 +-2.70319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83874 +20 +-2.70319 +11 +5.85941 +21 +-2.70319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85941 +20 +-2.70319 +11 +5.86318 +21 +-2.70394 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71148 +20 +-2.6765 +11 +5.71468 +21 +-2.67863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71468 +20 +-2.67863 +11 +5.71681 +21 +-2.68182 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71681 +20 +-2.68182 +11 +5.71756 +21 +-2.68559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71756 +20 +-2.68559 +11 +5.71756 +21 +-2.70626 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71756 +20 +-2.70626 +11 +5.71681 +21 +-2.71003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71681 +20 +-2.71003 +11 +5.71468 +21 +-2.71322 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71468 +20 +-2.71322 +11 +5.71148 +21 +-2.71535 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71148 +20 +-2.71535 +11 +5.70772 +21 +-2.7161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70772 +20 +-2.7161 +11 +5.67228 +21 +-2.7161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67228 +20 +-2.7161 +11 +5.66852 +21 +-2.71535 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66852 +20 +-2.71535 +11 +5.66532 +21 +-2.71322 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66532 +20 +-2.71322 +11 +5.66319 +21 +-2.71003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66319 +20 +-2.71003 +11 +5.66244 +21 +-2.70626 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66244 +20 +-2.70626 +11 +5.66244 +21 +-2.68559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66244 +20 +-2.68559 +11 +5.66319 +21 +-2.68182 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66319 +20 +-2.68182 +11 +5.66532 +21 +-2.67863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66532 +20 +-2.67863 +11 +5.66852 +21 +-2.6765 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66852 +20 +-2.6765 +11 +5.67228 +21 +-2.67575 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67228 +20 +-2.67575 +11 +5.70772 +21 +-2.67575 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70772 +20 +-2.67575 +11 +5.71148 +21 +-2.6765 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38148 +20 +-2.6765 +11 +5.38468 +21 +-2.67863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38468 +20 +-2.67863 +11 +5.38681 +21 +-2.68182 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38681 +20 +-2.68182 +11 +5.38756 +21 +-2.68559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38756 +20 +-2.68559 +11 +5.38756 +21 +-2.70626 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38756 +20 +-2.70626 +11 +5.38681 +21 +-2.71003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38681 +20 +-2.71003 +11 +5.38468 +21 +-2.71322 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38468 +20 +-2.71322 +11 +5.38148 +21 +-2.71535 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38148 +20 +-2.71535 +11 +5.37772 +21 +-2.7161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37772 +20 +-2.7161 +11 +5.34228 +21 +-2.7161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34228 +20 +-2.7161 +11 +5.33852 +21 +-2.71535 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33852 +20 +-2.71535 +11 +5.33532 +21 +-2.71322 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33532 +20 +-2.71322 +11 +5.33319 +21 +-2.71003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33319 +20 +-2.71003 +11 +5.33244 +21 +-2.70626 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33244 +20 +-2.70626 +11 +5.33244 +21 +-2.68559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33244 +20 +-2.68559 +11 +5.33319 +21 +-2.68182 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33319 +20 +-2.68182 +11 +5.33532 +21 +-2.67863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33532 +20 +-2.67863 +11 +5.33852 +21 +-2.6765 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33852 +20 +-2.6765 +11 +5.34228 +21 +-2.67575 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34228 +20 +-2.67575 +11 +5.37772 +21 +-2.67575 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37772 +20 +-2.67575 +11 +5.38148 +21 +-2.6765 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58861 +20 +-2.67102 +11 +6.5918 +21 +-2.67316 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5918 +20 +-2.67316 +11 +6.59394 +21 +-2.67635 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59394 +20 +-2.67635 +11 +6.59469 +21 +-2.68012 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59469 +20 +-2.68012 +11 +6.59469 +21 +-2.6998 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59469 +20 +-2.6998 +11 +6.59394 +21 +-2.70357 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59394 +20 +-2.70357 +11 +6.5918 +21 +-2.70676 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5918 +20 +-2.70676 +11 +6.58861 +21 +-2.7089 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58861 +20 +-2.7089 +11 +6.58484 +21 +-2.70965 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58484 +20 +-2.70965 +11 +6.56516 +21 +-2.70965 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56516 +20 +-2.70965 +11 +6.56139 +21 +-2.7089 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56139 +20 +-2.7089 +11 +6.5582 +21 +-2.70676 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5582 +20 +-2.70676 +11 +6.55606 +21 +-2.70357 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55606 +20 +-2.70357 +11 +6.55531 +21 +-2.6998 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55531 +20 +-2.6998 +11 +6.55531 +21 +-2.68012 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55531 +20 +-2.68012 +11 +6.55606 +21 +-2.67635 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55606 +20 +-2.67635 +11 +6.5582 +21 +-2.67316 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5582 +20 +-2.67316 +11 +6.56139 +21 +-2.67102 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56139 +20 +-2.67102 +11 +6.56516 +21 +-2.67028 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56516 +20 +-2.67028 +11 +6.58484 +21 +-2.67028 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58484 +20 +-2.67028 +11 +6.58861 +21 +-2.67102 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29747 +20 +-2.64921 +11 +6.30066 +21 +-2.65135 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30066 +20 +-2.65135 +11 +6.30279 +21 +-2.65454 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30279 +20 +-2.65454 +11 +6.30354 +21 +-2.65831 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30354 +20 +-2.65831 +11 +6.30354 +21 +-2.67799 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30354 +20 +-2.67799 +11 +6.30279 +21 +-2.68176 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30279 +20 +-2.68176 +11 +6.30066 +21 +-2.68495 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30066 +20 +-2.68495 +11 +6.29747 +21 +-2.68709 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29747 +20 +-2.68709 +11 +6.2937 +21 +-2.68783 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2937 +20 +-2.68783 +11 +6.2563 +21 +-2.68783 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2563 +20 +-2.68783 +11 +6.25253 +21 +-2.68709 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25253 +20 +-2.68709 +11 +6.24934 +21 +-2.68495 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24934 +20 +-2.68495 +11 +6.24721 +21 +-2.68176 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24721 +20 +-2.68176 +11 +6.24646 +21 +-2.67799 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24646 +20 +-2.67799 +11 +6.24646 +21 +-2.65831 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24646 +20 +-2.65831 +11 +6.24721 +21 +-2.65454 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24721 +20 +-2.65454 +11 +6.24934 +21 +-2.65135 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24934 +20 +-2.65135 +11 +6.25253 +21 +-2.64921 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25253 +20 +-2.64921 +11 +6.2563 +21 +-2.64846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2563 +20 +-2.64846 +11 +6.2937 +21 +-2.64846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2937 +20 +-2.64846 +11 +6.29747 +21 +-2.64921 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48601 +20 +-2.62795 +11 +6.4892 +21 +-2.63009 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4892 +20 +-2.63009 +11 +6.49134 +21 +-2.63328 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49134 +20 +-2.63328 +11 +6.49209 +21 +-2.63705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49209 +20 +-2.63705 +11 +6.49209 +21 +-2.67445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49209 +20 +-2.67445 +11 +6.49134 +21 +-2.67822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49134 +20 +-2.67822 +11 +6.4892 +21 +-2.68141 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4892 +20 +-2.68141 +11 +6.48601 +21 +-2.68354 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48601 +20 +-2.68354 +11 +6.48224 +21 +-2.68429 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48224 +20 +-2.68429 +11 +6.46256 +21 +-2.68429 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46256 +20 +-2.68429 +11 +6.45879 +21 +-2.68354 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45879 +20 +-2.68354 +11 +6.4556 +21 +-2.68141 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4556 +20 +-2.68141 +11 +6.45347 +21 +-2.67822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45347 +20 +-2.67822 +11 +6.45272 +21 +-2.67445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45272 +20 +-2.67445 +11 +6.45272 +21 +-2.63705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45272 +20 +-2.63705 +11 +6.45347 +21 +-2.63328 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45347 +20 +-2.63328 +11 +6.4556 +21 +-2.63009 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4556 +20 +-2.63009 +11 +6.45879 +21 +-2.62795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45879 +20 +-2.62795 +11 +6.46256 +21 +-2.6272 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46256 +20 +-2.6272 +11 +6.48224 +21 +-2.6272 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48224 +20 +-2.6272 +11 +6.48601 +21 +-2.62795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41121 +20 +-2.62795 +11 +6.4144 +21 +-2.63009 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4144 +20 +-2.63009 +11 +6.41653 +21 +-2.63328 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41653 +20 +-2.63328 +11 +6.41728 +21 +-2.63705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41728 +20 +-2.63705 +11 +6.41728 +21 +-2.67445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41728 +20 +-2.67445 +11 +6.41653 +21 +-2.67822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41653 +20 +-2.67822 +11 +6.4144 +21 +-2.68141 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4144 +20 +-2.68141 +11 +6.41121 +21 +-2.68354 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41121 +20 +-2.68354 +11 +6.40744 +21 +-2.68429 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40744 +20 +-2.68429 +11 +6.38776 +21 +-2.68429 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38776 +20 +-2.68429 +11 +6.38399 +21 +-2.68354 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38399 +20 +-2.68354 +11 +6.3808 +21 +-2.68141 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3808 +20 +-2.68141 +11 +6.37866 +21 +-2.67822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37866 +20 +-2.67822 +11 +6.37791 +21 +-2.67445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37791 +20 +-2.67445 +11 +6.37791 +21 +-2.63705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37791 +20 +-2.63705 +11 +6.37866 +21 +-2.63328 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37866 +20 +-2.63328 +11 +6.3808 +21 +-2.63009 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3808 +20 +-2.63009 +11 +6.38399 +21 +-2.62795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38399 +20 +-2.62795 +11 +6.38776 +21 +-2.6272 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38776 +20 +-2.6272 +11 +6.40744 +21 +-2.6272 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40744 +20 +-2.6272 +11 +6.41121 +21 +-2.62795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96224 +20 +-2.60025 +11 +5.96416 +21 +-2.60153 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96416 +20 +-2.60153 +11 +5.96544 +21 +-2.60345 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96544 +20 +-2.60345 +11 +5.96589 +21 +-2.60571 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96589 +20 +-2.60571 +11 +5.96589 +21 +-2.67067 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96589 +20 +-2.67067 +11 +5.96544 +21 +-2.67293 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96544 +20 +-2.67293 +11 +5.96416 +21 +-2.67485 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96416 +20 +-2.67485 +11 +5.96224 +21 +-2.67613 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96224 +20 +-2.67613 +11 +5.95998 +21 +-2.67657 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95998 +20 +-2.67657 +11 +5.94817 +21 +-2.67657 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94817 +20 +-2.67657 +11 +5.94591 +21 +-2.67613 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94591 +20 +-2.67613 +11 +5.94399 +21 +-2.67485 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94399 +20 +-2.67485 +11 +5.94271 +21 +-2.67293 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94271 +20 +-2.67293 +11 +5.94226 +21 +-2.67067 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94226 +20 +-2.67067 +11 +5.94226 +21 +-2.60571 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94226 +20 +-2.60571 +11 +5.94271 +21 +-2.60345 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94271 +20 +-2.60345 +11 +5.94399 +21 +-2.60153 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94399 +20 +-2.60153 +11 +5.94591 +21 +-2.60025 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94591 +20 +-2.60025 +11 +5.94817 +21 +-2.5998 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94817 +20 +-2.5998 +11 +5.95998 +21 +-2.5998 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95998 +20 +-2.5998 +11 +5.96224 +21 +-2.60025 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91224 +20 +-2.60025 +11 +5.91416 +21 +-2.60153 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91416 +20 +-2.60153 +11 +5.91544 +21 +-2.60345 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91544 +20 +-2.60345 +11 +5.91589 +21 +-2.60571 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91589 +20 +-2.60571 +11 +5.91589 +21 +-2.67067 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91589 +20 +-2.67067 +11 +5.91544 +21 +-2.67293 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91544 +20 +-2.67293 +11 +5.91416 +21 +-2.67485 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91416 +20 +-2.67485 +11 +5.91224 +21 +-2.67613 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91224 +20 +-2.67613 +11 +5.90998 +21 +-2.67657 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90998 +20 +-2.67657 +11 +5.89817 +21 +-2.67657 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89817 +20 +-2.67657 +11 +5.89591 +21 +-2.67613 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89591 +20 +-2.67613 +11 +5.89399 +21 +-2.67485 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89399 +20 +-2.67485 +11 +5.89271 +21 +-2.67293 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89271 +20 +-2.67293 +11 +5.89226 +21 +-2.67067 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89226 +20 +-2.67067 +11 +5.89226 +21 +-2.60571 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89226 +20 +-2.60571 +11 +5.89271 +21 +-2.60345 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89271 +20 +-2.60345 +11 +5.89399 +21 +-2.60153 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89399 +20 +-2.60153 +11 +5.89591 +21 +-2.60025 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89591 +20 +-2.60025 +11 +5.89817 +21 +-2.5998 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89817 +20 +-2.5998 +11 +5.90998 +21 +-2.5998 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90998 +20 +-2.5998 +11 +5.91224 +21 +-2.60025 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86224 +20 +-2.60025 +11 +5.86416 +21 +-2.60153 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86416 +20 +-2.60153 +11 +5.86544 +21 +-2.60345 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86544 +20 +-2.60345 +11 +5.86589 +21 +-2.60571 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86589 +20 +-2.60571 +11 +5.86589 +21 +-2.67067 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86589 +20 +-2.67067 +11 +5.86544 +21 +-2.67293 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86544 +20 +-2.67293 +11 +5.86416 +21 +-2.67485 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86416 +20 +-2.67485 +11 +5.86224 +21 +-2.67613 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86224 +20 +-2.67613 +11 +5.85998 +21 +-2.67657 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85998 +20 +-2.67657 +11 +5.84817 +21 +-2.67657 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84817 +20 +-2.67657 +11 +5.84591 +21 +-2.67613 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84591 +20 +-2.67613 +11 +5.84399 +21 +-2.67485 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84399 +20 +-2.67485 +11 +5.84271 +21 +-2.67293 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84271 +20 +-2.67293 +11 +5.84226 +21 +-2.67067 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84226 +20 +-2.67067 +11 +5.84226 +21 +-2.60571 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84226 +20 +-2.60571 +11 +5.84271 +21 +-2.60345 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84271 +20 +-2.60345 +11 +5.84399 +21 +-2.60153 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84399 +20 +-2.60153 +11 +5.84591 +21 +-2.60025 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84591 +20 +-2.60025 +11 +5.84817 +21 +-2.5998 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84817 +20 +-2.5998 +11 +5.85998 +21 +-2.5998 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85998 +20 +-2.5998 +11 +5.86224 +21 +-2.60025 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81224 +20 +-2.60025 +11 +5.81416 +21 +-2.60153 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81416 +20 +-2.60153 +11 +5.81544 +21 +-2.60345 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81544 +20 +-2.60345 +11 +5.81589 +21 +-2.60571 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81589 +20 +-2.60571 +11 +5.81589 +21 +-2.67067 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81589 +20 +-2.67067 +11 +5.81544 +21 +-2.67293 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81544 +20 +-2.67293 +11 +5.81416 +21 +-2.67485 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81416 +20 +-2.67485 +11 +5.81224 +21 +-2.67613 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81224 +20 +-2.67613 +11 +5.80998 +21 +-2.67657 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80998 +20 +-2.67657 +11 +5.79817 +21 +-2.67657 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79817 +20 +-2.67657 +11 +5.79591 +21 +-2.67613 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79591 +20 +-2.67613 +11 +5.79399 +21 +-2.67485 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79399 +20 +-2.67485 +11 +5.79271 +21 +-2.67293 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79271 +20 +-2.67293 +11 +5.79226 +21 +-2.67067 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79226 +20 +-2.67067 +11 +5.79226 +21 +-2.60571 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79226 +20 +-2.60571 +11 +5.79271 +21 +-2.60345 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79271 +20 +-2.60345 +11 +5.79399 +21 +-2.60153 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79399 +20 +-2.60153 +11 +5.79591 +21 +-2.60025 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79591 +20 +-2.60025 +11 +5.79817 +21 +-2.5998 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79817 +20 +-2.5998 +11 +5.80998 +21 +-2.5998 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80998 +20 +-2.5998 +11 +5.81224 +21 +-2.60025 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71148 +20 +-2.60465 +11 +5.71468 +21 +-2.60678 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71468 +20 +-2.60678 +11 +5.71681 +21 +-2.60997 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71681 +20 +-2.60997 +11 +5.71756 +21 +-2.61374 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71756 +20 +-2.61374 +11 +5.71756 +21 +-2.63441 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71756 +20 +-2.63441 +11 +5.71681 +21 +-2.63818 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71681 +20 +-2.63818 +11 +5.71468 +21 +-2.64137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71468 +20 +-2.64137 +11 +5.71148 +21 +-2.6435 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71148 +20 +-2.6435 +11 +5.70772 +21 +-2.64425 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70772 +20 +-2.64425 +11 +5.67228 +21 +-2.64425 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67228 +20 +-2.64425 +11 +5.66852 +21 +-2.6435 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66852 +20 +-2.6435 +11 +5.66532 +21 +-2.64137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66532 +20 +-2.64137 +11 +5.66319 +21 +-2.63818 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66319 +20 +-2.63818 +11 +5.66244 +21 +-2.63441 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66244 +20 +-2.63441 +11 +5.66244 +21 +-2.61374 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66244 +20 +-2.61374 +11 +5.66319 +21 +-2.60997 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66319 +20 +-2.60997 +11 +5.66532 +21 +-2.60678 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66532 +20 +-2.60678 +11 +5.66852 +21 +-2.60465 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66852 +20 +-2.60465 +11 +5.67228 +21 +-2.6039 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67228 +20 +-2.6039 +11 +5.70772 +21 +-2.6039 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70772 +20 +-2.6039 +11 +5.71148 +21 +-2.60465 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38148 +20 +-2.60465 +11 +5.38468 +21 +-2.60678 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38468 +20 +-2.60678 +11 +5.38681 +21 +-2.60997 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38681 +20 +-2.60997 +11 +5.38756 +21 +-2.61374 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38756 +20 +-2.61374 +11 +5.38756 +21 +-2.63441 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38756 +20 +-2.63441 +11 +5.38681 +21 +-2.63818 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38681 +20 +-2.63818 +11 +5.38468 +21 +-2.64137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38468 +20 +-2.64137 +11 +5.38148 +21 +-2.6435 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38148 +20 +-2.6435 +11 +5.37772 +21 +-2.64425 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37772 +20 +-2.64425 +11 +5.34228 +21 +-2.64425 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34228 +20 +-2.64425 +11 +5.33852 +21 +-2.6435 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33852 +20 +-2.6435 +11 +5.33532 +21 +-2.64137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33532 +20 +-2.64137 +11 +5.33319 +21 +-2.63818 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33319 +20 +-2.63818 +11 +5.33244 +21 +-2.63441 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33244 +20 +-2.63441 +11 +5.33244 +21 +-2.61374 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33244 +20 +-2.61374 +11 +5.33319 +21 +-2.60997 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33319 +20 +-2.60997 +11 +5.33532 +21 +-2.60678 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33532 +20 +-2.60678 +11 +5.33852 +21 +-2.60465 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33852 +20 +-2.60465 +11 +5.34228 +21 +-2.6039 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34228 +20 +-2.6039 +11 +5.37772 +21 +-2.6039 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37772 +20 +-2.6039 +11 +5.38148 +21 +-2.60465 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20861 +20 +-2.57543 +11 +6.2118 +21 +-2.57756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2118 +20 +-2.57756 +11 +6.21394 +21 +-2.58075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21394 +20 +-2.58075 +11 +6.21469 +21 +-2.58452 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21469 +20 +-2.58452 +11 +6.21469 +21 +-2.6042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21469 +20 +-2.6042 +11 +6.21394 +21 +-2.60797 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21394 +20 +-2.60797 +11 +6.2118 +21 +-2.61116 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2118 +20 +-2.61116 +11 +6.20861 +21 +-2.6133 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20861 +20 +-2.6133 +11 +6.20484 +21 +-2.61405 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20484 +20 +-2.61405 +11 +6.18516 +21 +-2.61405 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18516 +20 +-2.61405 +11 +6.18139 +21 +-2.6133 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18139 +20 +-2.6133 +11 +6.1782 +21 +-2.61116 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1782 +20 +-2.61116 +11 +6.17606 +21 +-2.60797 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17606 +20 +-2.60797 +11 +6.17531 +21 +-2.6042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17531 +20 +-2.6042 +11 +6.17531 +21 +-2.58452 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17531 +20 +-2.58452 +11 +6.17606 +21 +-2.58075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17606 +20 +-2.58075 +11 +6.1782 +21 +-2.57756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1782 +20 +-2.57756 +11 +6.18139 +21 +-2.57543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18139 +20 +-2.57543 +11 +6.18516 +21 +-2.57468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18516 +20 +-2.57468 +11 +6.20484 +21 +-2.57468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20484 +20 +-2.57468 +11 +6.20861 +21 +-2.57543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29747 +20 +-2.57441 +11 +6.30066 +21 +-2.57654 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30066 +20 +-2.57654 +11 +6.30279 +21 +-2.57974 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30279 +20 +-2.57974 +11 +6.30354 +21 +-2.5835 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30354 +20 +-2.5835 +11 +6.30354 +21 +-2.60319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30354 +20 +-2.60319 +11 +6.30279 +21 +-2.60696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30279 +20 +-2.60696 +11 +6.30066 +21 +-2.61015 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30066 +20 +-2.61015 +11 +6.29747 +21 +-2.61228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29747 +20 +-2.61228 +11 +6.2937 +21 +-2.61303 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2937 +20 +-2.61303 +11 +6.2563 +21 +-2.61303 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2563 +20 +-2.61303 +11 +6.25253 +21 +-2.61228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25253 +20 +-2.61228 +11 +6.24934 +21 +-2.61015 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24934 +20 +-2.61015 +11 +6.24721 +21 +-2.60696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24721 +20 +-2.60696 +11 +6.24646 +21 +-2.60319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24646 +20 +-2.60319 +11 +6.24646 +21 +-2.5835 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24646 +20 +-2.5835 +11 +6.24721 +21 +-2.57974 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24721 +20 +-2.57974 +11 +6.24934 +21 +-2.57654 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24934 +20 +-2.57654 +11 +6.25253 +21 +-2.57441 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25253 +20 +-2.57441 +11 +6.2563 +21 +-2.57366 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2563 +20 +-2.57366 +11 +6.2937 +21 +-2.57366 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2937 +20 +-2.57366 +11 +6.29747 +21 +-2.57441 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58861 +20 +-2.5726 +11 +6.5918 +21 +-2.57473 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5918 +20 +-2.57473 +11 +6.59394 +21 +-2.57793 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59394 +20 +-2.57793 +11 +6.59469 +21 +-2.58169 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59469 +20 +-2.58169 +11 +6.59469 +21 +-2.60138 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59469 +20 +-2.60138 +11 +6.59394 +21 +-2.60514 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59394 +20 +-2.60514 +11 +6.5918 +21 +-2.60834 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5918 +20 +-2.60834 +11 +6.58861 +21 +-2.61047 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58861 +20 +-2.61047 +11 +6.58484 +21 +-2.61122 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58484 +20 +-2.61122 +11 +6.56516 +21 +-2.61122 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56516 +20 +-2.61122 +11 +6.56139 +21 +-2.61047 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56139 +20 +-2.61047 +11 +6.5582 +21 +-2.60834 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5582 +20 +-2.60834 +11 +6.55606 +21 +-2.60514 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55606 +20 +-2.60514 +11 +6.55531 +21 +-2.60138 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55531 +20 +-2.60138 +11 +6.55531 +21 +-2.58169 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55531 +20 +-2.58169 +11 +6.55606 +21 +-2.57793 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55606 +20 +-2.57793 +11 +6.5582 +21 +-2.57473 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5582 +20 +-2.57473 +11 +6.56139 +21 +-2.5726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56139 +20 +-2.5726 +11 +6.56516 +21 +-2.57185 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56516 +20 +-2.57185 +11 +6.58484 +21 +-2.57185 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58484 +20 +-2.57185 +11 +6.58861 +21 +-2.5726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38148 +20 +-2.5415 +11 +5.38468 +21 +-2.54363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38468 +20 +-2.54363 +11 +5.38681 +21 +-2.54682 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38681 +20 +-2.54682 +11 +5.38756 +21 +-2.55059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38756 +20 +-2.55059 +11 +5.38756 +21 +-2.57126 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38756 +20 +-2.57126 +11 +5.38681 +21 +-2.57503 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38681 +20 +-2.57503 +11 +5.38468 +21 +-2.57822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38468 +20 +-2.57822 +11 +5.38148 +21 +-2.58035 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38148 +20 +-2.58035 +11 +5.37772 +21 +-2.5811 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37772 +20 +-2.5811 +11 +5.34228 +21 +-2.5811 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34228 +20 +-2.5811 +11 +5.33852 +21 +-2.58035 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33852 +20 +-2.58035 +11 +5.33532 +21 +-2.57822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33532 +20 +-2.57822 +11 +5.33319 +21 +-2.57503 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33319 +20 +-2.57503 +11 +5.33244 +21 +-2.57126 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33244 +20 +-2.57126 +11 +5.33244 +21 +-2.55059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33244 +20 +-2.55059 +11 +5.33319 +21 +-2.54682 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33319 +20 +-2.54682 +11 +5.33532 +21 +-2.54363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33532 +20 +-2.54363 +11 +5.33852 +21 +-2.5415 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33852 +20 +-2.5415 +11 +5.34228 +21 +-2.54075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34228 +20 +-2.54075 +11 +5.37772 +21 +-2.54075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37772 +20 +-2.54075 +11 +5.38148 +21 +-2.5415 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48282 +20 +-2.53681 +11 +6.48601 +21 +-2.53895 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48601 +20 +-2.53895 +11 +6.48815 +21 +-2.54214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48815 +20 +-2.54214 +11 +6.4889 +21 +-2.54591 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4889 +20 +-2.54591 +11 +6.4889 +21 +-2.56559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4889 +20 +-2.56559 +11 +6.48815 +21 +-2.56936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48815 +20 +-2.56936 +11 +6.48601 +21 +-2.57255 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48601 +20 +-2.57255 +11 +6.48282 +21 +-2.57468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48282 +20 +-2.57468 +11 +6.47906 +21 +-2.57543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47906 +20 +-2.57543 +11 +6.45937 +21 +-2.57543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45937 +20 +-2.57543 +11 +6.4556 +21 +-2.57468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4556 +20 +-2.57468 +11 +6.45241 +21 +-2.57255 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45241 +20 +-2.57255 +11 +6.45028 +21 +-2.56936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45028 +20 +-2.56936 +11 +6.44953 +21 +-2.56559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44953 +20 +-2.56559 +11 +6.44953 +21 +-2.54591 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44953 +20 +-2.54591 +11 +6.45028 +21 +-2.54214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45028 +20 +-2.54214 +11 +6.45241 +21 +-2.53895 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45241 +20 +-2.53895 +11 +6.4556 +21 +-2.53681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4556 +20 +-2.53681 +11 +6.45937 +21 +-2.53606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45937 +20 +-2.53606 +11 +6.47906 +21 +-2.53606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47906 +20 +-2.53606 +11 +6.48282 +21 +-2.53681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3844 +20 +-2.53681 +11 +6.38759 +21 +-2.53895 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38759 +20 +-2.53895 +11 +6.38972 +21 +-2.54214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38972 +20 +-2.54214 +11 +6.39047 +21 +-2.54591 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39047 +20 +-2.54591 +11 +6.39047 +21 +-2.56559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39047 +20 +-2.56559 +11 +6.38972 +21 +-2.56936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38972 +20 +-2.56936 +11 +6.38759 +21 +-2.57255 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38759 +20 +-2.57255 +11 +6.3844 +21 +-2.57468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3844 +20 +-2.57468 +11 +6.38063 +21 +-2.57543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38063 +20 +-2.57543 +11 +6.36094 +21 +-2.57543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36094 +20 +-2.57543 +11 +6.35718 +21 +-2.57468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35718 +20 +-2.57468 +11 +6.35399 +21 +-2.57255 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35399 +20 +-2.57255 +11 +6.35185 +21 +-2.56936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35185 +20 +-2.56936 +11 +6.3511 +21 +-2.56559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3511 +20 +-2.56559 +11 +6.3511 +21 +-2.54591 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3511 +20 +-2.54591 +11 +6.35185 +21 +-2.54214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35185 +20 +-2.54214 +11 +6.35399 +21 +-2.53895 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35399 +20 +-2.53895 +11 +6.35718 +21 +-2.53681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35718 +20 +-2.53681 +11 +6.36094 +21 +-2.53606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36094 +20 +-2.53606 +11 +6.38063 +21 +-2.53606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38063 +20 +-2.53606 +11 +6.3844 +21 +-2.53681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05056 +20 +-2.5065 +11 +6.05375 +21 +-2.50863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05375 +20 +-2.50863 +11 +6.05588 +21 +-2.51182 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05588 +20 +-2.51182 +11 +6.05663 +21 +-2.51559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05663 +20 +-2.51559 +11 +6.05663 +21 +-2.53626 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05663 +20 +-2.53626 +11 +6.05588 +21 +-2.54003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05588 +20 +-2.54003 +11 +6.05375 +21 +-2.54322 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05375 +20 +-2.54322 +11 +6.05056 +21 +-2.54535 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05056 +20 +-2.54535 +11 +6.04679 +21 +-2.5461 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04679 +20 +-2.5461 +11 +6.01136 +21 +-2.5461 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01136 +20 +-2.5461 +11 +6.00759 +21 +-2.54535 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00759 +20 +-2.54535 +11 +6.0044 +21 +-2.54322 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0044 +20 +-2.54322 +11 +6.00226 +21 +-2.54003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00226 +20 +-2.54003 +11 +6.00152 +21 +-2.53626 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00152 +20 +-2.53626 +11 +6.00152 +21 +-2.51559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00152 +20 +-2.51559 +11 +6.00226 +21 +-2.51182 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00226 +20 +-2.51182 +11 +6.0044 +21 +-2.50863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0044 +20 +-2.50863 +11 +6.00759 +21 +-2.5065 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00759 +20 +-2.5065 +11 +6.01136 +21 +-2.50575 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01136 +20 +-2.50575 +11 +6.04679 +21 +-2.50575 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04679 +20 +-2.50575 +11 +6.05056 +21 +-2.5065 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30756 +20 +-2.49665 +11 +6.31075 +21 +-2.49878 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31075 +20 +-2.49878 +11 +6.31288 +21 +-2.50197 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31288 +20 +-2.50197 +11 +6.31363 +21 +-2.50574 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31363 +20 +-2.50574 +11 +6.31363 +21 +-2.52641 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31363 +20 +-2.52641 +11 +6.31288 +21 +-2.53018 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31288 +20 +-2.53018 +11 +6.31075 +21 +-2.53337 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31075 +20 +-2.53337 +11 +6.30756 +21 +-2.5355 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30756 +20 +-2.5355 +11 +6.30379 +21 +-2.53625 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30379 +20 +-2.53625 +11 +6.26836 +21 +-2.53625 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26836 +20 +-2.53625 +11 +6.26459 +21 +-2.5355 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26459 +20 +-2.5355 +11 +6.2614 +21 +-2.53337 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2614 +20 +-2.53337 +11 +6.25926 +21 +-2.53018 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25926 +20 +-2.53018 +11 +6.25852 +21 +-2.52641 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25852 +20 +-2.52641 +11 +6.25852 +21 +-2.50574 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25852 +20 +-2.50574 +11 +6.25926 +21 +-2.50197 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25926 +20 +-2.50197 +11 +6.2614 +21 +-2.49878 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2614 +20 +-2.49878 +11 +6.26459 +21 +-2.49665 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26459 +20 +-2.49665 +11 +6.26836 +21 +-2.4959 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26836 +20 +-2.4959 +11 +6.30379 +21 +-2.4959 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30379 +20 +-2.4959 +11 +6.30756 +21 +-2.49665 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73455 +20 +-2.48847 +11 +5.73775 +21 +-2.4906 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73775 +20 +-2.4906 +11 +5.73988 +21 +-2.49379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73988 +20 +-2.49379 +11 +5.74063 +21 +-2.49756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74063 +20 +-2.49756 +11 +5.74063 +21 +-2.51724 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74063 +20 +-2.51724 +11 +5.73988 +21 +-2.52101 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73988 +20 +-2.52101 +11 +5.73775 +21 +-2.5242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73775 +20 +-2.5242 +11 +5.73455 +21 +-2.52634 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73455 +20 +-2.52634 +11 +5.73079 +21 +-2.52709 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73079 +20 +-2.52709 +11 +5.69339 +21 +-2.52709 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.69339 +20 +-2.52709 +11 +5.68962 +21 +-2.52634 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68962 +20 +-2.52634 +11 +5.68643 +21 +-2.5242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68643 +20 +-2.5242 +11 +5.68429 +21 +-2.52101 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68429 +20 +-2.52101 +11 +5.68354 +21 +-2.51724 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68354 +20 +-2.51724 +11 +5.68354 +21 +-2.49756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68354 +20 +-2.49756 +11 +5.68429 +21 +-2.49379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68429 +20 +-2.49379 +11 +5.68643 +21 +-2.4906 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68643 +20 +-2.4906 +11 +5.68962 +21 +-2.48847 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68962 +20 +-2.48847 +11 +5.69339 +21 +-2.48772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.69339 +20 +-2.48772 +11 +5.73079 +21 +-2.48772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73079 +20 +-2.48772 +11 +5.73455 +21 +-2.48847 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20861 +20 +-2.477 +11 +6.2118 +21 +-2.47913 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2118 +20 +-2.47913 +11 +6.21394 +21 +-2.48233 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21394 +20 +-2.48233 +11 +6.21469 +21 +-2.48609 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21469 +20 +-2.48609 +11 +6.21469 +21 +-2.50578 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21469 +20 +-2.50578 +11 +6.21394 +21 +-2.50955 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21394 +20 +-2.50955 +11 +6.2118 +21 +-2.51274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2118 +20 +-2.51274 +11 +6.20861 +21 +-2.51487 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20861 +20 +-2.51487 +11 +6.20484 +21 +-2.51562 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20484 +20 +-2.51562 +11 +6.18516 +21 +-2.51562 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18516 +20 +-2.51562 +11 +6.18139 +21 +-2.51487 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18139 +20 +-2.51487 +11 +6.1782 +21 +-2.51274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1782 +20 +-2.51274 +11 +6.17606 +21 +-2.50955 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17606 +20 +-2.50955 +11 +6.17531 +21 +-2.50578 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17531 +20 +-2.50578 +11 +6.17531 +21 +-2.48609 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17531 +20 +-2.48609 +11 +6.17606 +21 +-2.48233 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17606 +20 +-2.48233 +11 +6.1782 +21 +-2.47913 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1782 +20 +-2.47913 +11 +6.18139 +21 +-2.477 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18139 +20 +-2.477 +11 +6.18516 +21 +-2.47625 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18516 +20 +-2.47625 +11 +6.20484 +21 +-2.47625 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20484 +20 +-2.47625 +11 +6.20861 +21 +-2.477 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38148 +20 +-2.46965 +11 +5.38468 +21 +-2.47178 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38468 +20 +-2.47178 +11 +5.38681 +21 +-2.47497 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38681 +20 +-2.47497 +11 +5.38756 +21 +-2.47874 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38756 +20 +-2.47874 +11 +5.38756 +21 +-2.49941 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38756 +20 +-2.49941 +11 +5.38681 +21 +-2.50318 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38681 +20 +-2.50318 +11 +5.38468 +21 +-2.50637 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38468 +20 +-2.50637 +11 +5.38148 +21 +-2.5085 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38148 +20 +-2.5085 +11 +5.37772 +21 +-2.50925 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37772 +20 +-2.50925 +11 +5.34228 +21 +-2.50925 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34228 +20 +-2.50925 +11 +5.33852 +21 +-2.5085 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33852 +20 +-2.5085 +11 +5.33532 +21 +-2.50637 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33532 +20 +-2.50637 +11 +5.33319 +21 +-2.50318 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33319 +20 +-2.50318 +11 +5.33244 +21 +-2.49941 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33244 +20 +-2.49941 +11 +5.33244 +21 +-2.47874 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33244 +20 +-2.47874 +11 +5.33319 +21 +-2.47497 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33319 +20 +-2.47497 +11 +5.33532 +21 +-2.47178 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33532 +20 +-2.47178 +11 +5.33852 +21 +-2.46965 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33852 +20 +-2.46965 +11 +5.34228 +21 +-2.4689 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34228 +20 +-2.4689 +11 +5.37772 +21 +-2.4689 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37772 +20 +-2.4689 +11 +5.38148 +21 +-2.46965 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44709 +20 +-2.43795 +11 +6.45028 +21 +-2.44009 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45028 +20 +-2.44009 +11 +6.45241 +21 +-2.44328 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45241 +20 +-2.44328 +11 +6.45316 +21 +-2.44705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45316 +20 +-2.44705 +11 +6.45316 +21 +-2.48445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45316 +20 +-2.48445 +11 +6.45241 +21 +-2.48822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45241 +20 +-2.48822 +11 +6.45028 +21 +-2.49141 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45028 +20 +-2.49141 +11 +6.44709 +21 +-2.49354 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44709 +20 +-2.49354 +11 +6.44332 +21 +-2.49429 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44332 +20 +-2.49429 +11 +6.42363 +21 +-2.49429 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42363 +20 +-2.49429 +11 +6.41987 +21 +-2.49354 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41987 +20 +-2.49354 +11 +6.41667 +21 +-2.49141 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41667 +20 +-2.49141 +11 +6.41454 +21 +-2.48822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41454 +20 +-2.48822 +11 +6.41379 +21 +-2.48445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41379 +20 +-2.48445 +11 +6.41379 +21 +-2.44705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41379 +20 +-2.44705 +11 +6.41454 +21 +-2.44328 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41454 +20 +-2.44328 +11 +6.41667 +21 +-2.44009 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41667 +20 +-2.44009 +11 +6.41987 +21 +-2.43795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41987 +20 +-2.43795 +11 +6.42363 +21 +-2.4372 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42363 +20 +-2.4372 +11 +6.44332 +21 +-2.4372 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44332 +20 +-2.4372 +11 +6.44709 +21 +-2.43795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37228 +20 +-2.43795 +11 +6.37548 +21 +-2.44009 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37548 +20 +-2.44009 +11 +6.37761 +21 +-2.44328 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37761 +20 +-2.44328 +11 +6.37836 +21 +-2.44705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37836 +20 +-2.44705 +11 +6.37836 +21 +-2.48445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37836 +20 +-2.48445 +11 +6.37761 +21 +-2.48822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37761 +20 +-2.48822 +11 +6.37548 +21 +-2.49141 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37548 +20 +-2.49141 +11 +6.37228 +21 +-2.49354 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37228 +20 +-2.49354 +11 +6.36852 +21 +-2.49429 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36852 +20 +-2.49429 +11 +6.34883 +21 +-2.49429 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34883 +20 +-2.49429 +11 +6.34506 +21 +-2.49354 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34506 +20 +-2.49354 +11 +6.34187 +21 +-2.49141 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34187 +20 +-2.49141 +11 +6.33974 +21 +-2.48822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33974 +20 +-2.48822 +11 +6.33899 +21 +-2.48445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33899 +20 +-2.48445 +11 +6.33899 +21 +-2.44705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33899 +20 +-2.44705 +11 +6.33974 +21 +-2.44328 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33974 +20 +-2.44328 +11 +6.34187 +21 +-2.44009 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34187 +20 +-2.44009 +11 +6.34506 +21 +-2.43795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34506 +20 +-2.43795 +11 +6.34883 +21 +-2.4372 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34883 +20 +-2.4372 +11 +6.36852 +21 +-2.4372 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36852 +20 +-2.4372 +11 +6.37228 +21 +-2.43795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96224 +20 +-2.40537 +11 +5.96416 +21 +-2.40665 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96416 +20 +-2.40665 +11 +5.96544 +21 +-2.40857 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96544 +20 +-2.40857 +11 +5.96589 +21 +-2.41083 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96589 +20 +-2.41083 +11 +5.96589 +21 +-2.47579 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96589 +20 +-2.47579 +11 +5.96544 +21 +-2.47805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96544 +20 +-2.47805 +11 +5.96416 +21 +-2.47996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96416 +20 +-2.47996 +11 +5.96224 +21 +-2.48124 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96224 +20 +-2.48124 +11 +5.95998 +21 +-2.48169 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95998 +20 +-2.48169 +11 +5.94817 +21 +-2.48169 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94817 +20 +-2.48169 +11 +5.94591 +21 +-2.48124 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94591 +20 +-2.48124 +11 +5.94399 +21 +-2.47996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94399 +20 +-2.47996 +11 +5.94271 +21 +-2.47805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94271 +20 +-2.47805 +11 +5.94226 +21 +-2.47579 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94226 +20 +-2.47579 +11 +5.94226 +21 +-2.41083 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94226 +20 +-2.41083 +11 +5.94271 +21 +-2.40857 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94271 +20 +-2.40857 +11 +5.94399 +21 +-2.40665 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94399 +20 +-2.40665 +11 +5.94591 +21 +-2.40537 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94591 +20 +-2.40537 +11 +5.94817 +21 +-2.40492 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94817 +20 +-2.40492 +11 +5.95998 +21 +-2.40492 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95998 +20 +-2.40492 +11 +5.96224 +21 +-2.40537 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91224 +20 +-2.40537 +11 +5.91416 +21 +-2.40665 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91416 +20 +-2.40665 +11 +5.91544 +21 +-2.40857 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91544 +20 +-2.40857 +11 +5.91589 +21 +-2.41083 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91589 +20 +-2.41083 +11 +5.91589 +21 +-2.47579 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91589 +20 +-2.47579 +11 +5.91544 +21 +-2.47805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91544 +20 +-2.47805 +11 +5.91416 +21 +-2.47996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91416 +20 +-2.47996 +11 +5.91224 +21 +-2.48124 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91224 +20 +-2.48124 +11 +5.90998 +21 +-2.48169 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90998 +20 +-2.48169 +11 +5.89817 +21 +-2.48169 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89817 +20 +-2.48169 +11 +5.89591 +21 +-2.48124 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89591 +20 +-2.48124 +11 +5.89399 +21 +-2.47996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89399 +20 +-2.47996 +11 +5.89271 +21 +-2.47805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89271 +20 +-2.47805 +11 +5.89226 +21 +-2.47579 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89226 +20 +-2.47579 +11 +5.89226 +21 +-2.41083 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89226 +20 +-2.41083 +11 +5.89271 +21 +-2.40857 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89271 +20 +-2.40857 +11 +5.89399 +21 +-2.40665 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89399 +20 +-2.40665 +11 +5.89591 +21 +-2.40537 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89591 +20 +-2.40537 +11 +5.89817 +21 +-2.40492 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89817 +20 +-2.40492 +11 +5.90998 +21 +-2.40492 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90998 +20 +-2.40492 +11 +5.91224 +21 +-2.40537 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86224 +20 +-2.40537 +11 +5.86416 +21 +-2.40665 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86416 +20 +-2.40665 +11 +5.86544 +21 +-2.40857 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86544 +20 +-2.40857 +11 +5.86589 +21 +-2.41083 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86589 +20 +-2.41083 +11 +5.86589 +21 +-2.47579 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86589 +20 +-2.47579 +11 +5.86544 +21 +-2.47805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86544 +20 +-2.47805 +11 +5.86416 +21 +-2.47996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86416 +20 +-2.47996 +11 +5.86224 +21 +-2.48124 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86224 +20 +-2.48124 +11 +5.85998 +21 +-2.48169 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85998 +20 +-2.48169 +11 +5.84817 +21 +-2.48169 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84817 +20 +-2.48169 +11 +5.84591 +21 +-2.48124 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84591 +20 +-2.48124 +11 +5.84399 +21 +-2.47996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84399 +20 +-2.47996 +11 +5.84271 +21 +-2.47805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84271 +20 +-2.47805 +11 +5.84226 +21 +-2.47579 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84226 +20 +-2.47579 +11 +5.84226 +21 +-2.41083 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84226 +20 +-2.41083 +11 +5.84271 +21 +-2.40857 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84271 +20 +-2.40857 +11 +5.84399 +21 +-2.40665 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84399 +20 +-2.40665 +11 +5.84591 +21 +-2.40537 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84591 +20 +-2.40537 +11 +5.84817 +21 +-2.40492 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84817 +20 +-2.40492 +11 +5.85998 +21 +-2.40492 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85998 +20 +-2.40492 +11 +5.86224 +21 +-2.40537 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81224 +20 +-2.40537 +11 +5.81416 +21 +-2.40665 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81416 +20 +-2.40665 +11 +5.81544 +21 +-2.40857 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81544 +20 +-2.40857 +11 +5.81589 +21 +-2.41083 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81589 +20 +-2.41083 +11 +5.81589 +21 +-2.47579 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81589 +20 +-2.47579 +11 +5.81544 +21 +-2.47805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81544 +20 +-2.47805 +11 +5.81416 +21 +-2.47996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81416 +20 +-2.47996 +11 +5.81224 +21 +-2.48124 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81224 +20 +-2.48124 +11 +5.80998 +21 +-2.48169 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80998 +20 +-2.48169 +11 +5.79817 +21 +-2.48169 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79817 +20 +-2.48169 +11 +5.79591 +21 +-2.48124 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79591 +20 +-2.48124 +11 +5.79399 +21 +-2.47996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79399 +20 +-2.47996 +11 +5.79271 +21 +-2.47805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79271 +20 +-2.47805 +11 +5.79226 +21 +-2.47579 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79226 +20 +-2.47579 +11 +5.79226 +21 +-2.41083 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79226 +20 +-2.41083 +11 +5.79271 +21 +-2.40857 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79271 +20 +-2.40857 +11 +5.79399 +21 +-2.40665 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79399 +20 +-2.40665 +11 +5.79591 +21 +-2.40537 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79591 +20 +-2.40537 +11 +5.79817 +21 +-2.40492 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79817 +20 +-2.40492 +11 +5.80998 +21 +-2.40492 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80998 +20 +-2.40492 +11 +5.81224 +21 +-2.40537 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54247 +20 +-2.43921 +11 +6.54566 +21 +-2.44135 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54566 +20 +-2.44135 +11 +6.54779 +21 +-2.44454 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54779 +20 +-2.44454 +11 +6.54854 +21 +-2.44831 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54854 +20 +-2.44831 +11 +6.54854 +21 +-2.46799 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54854 +20 +-2.46799 +11 +6.54779 +21 +-2.47176 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54779 +20 +-2.47176 +11 +6.54566 +21 +-2.47495 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54566 +20 +-2.47495 +11 +6.54247 +21 +-2.47709 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54247 +20 +-2.47709 +11 +6.5387 +21 +-2.47783 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5387 +20 +-2.47783 +11 +6.5013 +21 +-2.47783 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5013 +20 +-2.47783 +11 +6.49753 +21 +-2.47709 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49753 +20 +-2.47709 +11 +6.49434 +21 +-2.47495 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49434 +20 +-2.47495 +11 +6.49221 +21 +-2.47176 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49221 +20 +-2.47176 +11 +6.49146 +21 +-2.46799 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49146 +20 +-2.46799 +11 +6.49146 +21 +-2.44831 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49146 +20 +-2.44831 +11 +6.49221 +21 +-2.44454 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49221 +20 +-2.44454 +11 +6.49434 +21 +-2.44135 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49434 +20 +-2.44135 +11 +6.49753 +21 +-2.43921 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49753 +20 +-2.43921 +11 +6.5013 +21 +-2.43846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5013 +20 +-2.43846 +11 +6.5387 +21 +-2.43846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5387 +20 +-2.43846 +11 +6.54247 +21 +-2.43921 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05056 +20 +-2.43465 +11 +6.05375 +21 +-2.43678 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05375 +20 +-2.43678 +11 +6.05588 +21 +-2.43997 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05588 +20 +-2.43997 +11 +6.05663 +21 +-2.44374 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05663 +20 +-2.44374 +11 +6.05663 +21 +-2.46441 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05663 +20 +-2.46441 +11 +6.05588 +21 +-2.46818 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05588 +20 +-2.46818 +11 +6.05375 +21 +-2.47137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05375 +20 +-2.47137 +11 +6.05056 +21 +-2.4735 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05056 +20 +-2.4735 +11 +6.04679 +21 +-2.47425 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04679 +20 +-2.47425 +11 +6.01136 +21 +-2.47425 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01136 +20 +-2.47425 +11 +6.00759 +21 +-2.4735 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00759 +20 +-2.4735 +11 +6.0044 +21 +-2.47137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0044 +20 +-2.47137 +11 +6.00226 +21 +-2.46818 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00226 +20 +-2.46818 +11 +6.00152 +21 +-2.46441 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00152 +20 +-2.46441 +11 +6.00152 +21 +-2.44374 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00152 +20 +-2.44374 +11 +6.00226 +21 +-2.43997 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00226 +20 +-2.43997 +11 +6.0044 +21 +-2.43678 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0044 +20 +-2.43678 +11 +6.00759 +21 +-2.43465 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00759 +20 +-2.43465 +11 +6.01136 +21 +-2.4339 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01136 +20 +-2.4339 +11 +6.04679 +21 +-2.4339 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04679 +20 +-2.4339 +11 +6.05056 +21 +-2.43465 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30756 +20 +-2.4248 +11 +6.31075 +21 +-2.42693 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31075 +20 +-2.42693 +11 +6.31288 +21 +-2.43012 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31288 +20 +-2.43012 +11 +6.31363 +21 +-2.43389 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31363 +20 +-2.43389 +11 +6.31363 +21 +-2.45456 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31363 +20 +-2.45456 +11 +6.31288 +21 +-2.45833 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31288 +20 +-2.45833 +11 +6.31075 +21 +-2.46152 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31075 +20 +-2.46152 +11 +6.30756 +21 +-2.46365 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30756 +20 +-2.46365 +11 +6.30379 +21 +-2.4644 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30379 +20 +-2.4644 +11 +6.26836 +21 +-2.4644 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26836 +20 +-2.4644 +11 +6.26459 +21 +-2.46365 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26459 +20 +-2.46365 +11 +6.2614 +21 +-2.46152 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2614 +20 +-2.46152 +11 +6.25926 +21 +-2.45833 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25926 +20 +-2.45833 +11 +6.25852 +21 +-2.45456 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25852 +20 +-2.45456 +11 +6.25852 +21 +-2.43389 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25852 +20 +-2.43389 +11 +6.25926 +21 +-2.43012 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25926 +20 +-2.43012 +11 +6.2614 +21 +-2.42693 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2614 +20 +-2.42693 +11 +6.26459 +21 +-2.4248 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26459 +20 +-2.4248 +11 +6.26836 +21 +-2.42405 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26836 +20 +-2.42405 +11 +6.30379 +21 +-2.42405 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30379 +20 +-2.42405 +11 +6.30756 +21 +-2.4248 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73455 +20 +-2.41366 +11 +5.73775 +21 +-2.4158 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73775 +20 +-2.4158 +11 +5.73988 +21 +-2.41899 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73988 +20 +-2.41899 +11 +5.74063 +21 +-2.42276 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74063 +20 +-2.42276 +11 +5.74063 +21 +-2.44244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74063 +20 +-2.44244 +11 +5.73988 +21 +-2.44621 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73988 +20 +-2.44621 +11 +5.73775 +21 +-2.4494 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73775 +20 +-2.4494 +11 +5.73455 +21 +-2.45153 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73455 +20 +-2.45153 +11 +5.73079 +21 +-2.45228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73079 +20 +-2.45228 +11 +5.69339 +21 +-2.45228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.69339 +20 +-2.45228 +11 +5.68962 +21 +-2.45153 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68962 +20 +-2.45153 +11 +5.68643 +21 +-2.4494 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68643 +20 +-2.4494 +11 +5.68429 +21 +-2.44621 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68429 +20 +-2.44621 +11 +5.68354 +21 +-2.44244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68354 +20 +-2.44244 +11 +5.68354 +21 +-2.42276 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68354 +20 +-2.42276 +11 +5.68429 +21 +-2.41899 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68429 +20 +-2.41899 +11 +5.68643 +21 +-2.4158 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68643 +20 +-2.4158 +11 +5.68962 +21 +-2.41366 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68962 +20 +-2.41366 +11 +5.69339 +21 +-2.41291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.69339 +20 +-2.41291 +11 +5.73079 +21 +-2.41291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73079 +20 +-2.41291 +11 +5.73455 +21 +-2.41366 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38148 +20 +-2.40742 +11 +5.38468 +21 +-2.40956 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38468 +20 +-2.40956 +11 +5.38681 +21 +-2.41275 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38681 +20 +-2.41275 +11 +5.38756 +21 +-2.41652 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38756 +20 +-2.41652 +11 +5.38756 +21 +-2.43719 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38756 +20 +-2.43719 +11 +5.38681 +21 +-2.44095 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38681 +20 +-2.44095 +11 +5.38468 +21 +-2.44414 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38468 +20 +-2.44414 +11 +5.38148 +21 +-2.44628 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38148 +20 +-2.44628 +11 +5.37772 +21 +-2.44703 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37772 +20 +-2.44703 +11 +5.34228 +21 +-2.44703 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34228 +20 +-2.44703 +11 +5.33852 +21 +-2.44628 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33852 +20 +-2.44628 +11 +5.33532 +21 +-2.44414 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33532 +20 +-2.44414 +11 +5.33319 +21 +-2.44095 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33319 +20 +-2.44095 +11 +5.33244 +21 +-2.43719 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33244 +20 +-2.43719 +11 +5.33244 +21 +-2.41652 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33244 +20 +-2.41652 +11 +5.33319 +21 +-2.41275 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33319 +20 +-2.41275 +11 +5.33532 +21 +-2.40956 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33532 +20 +-2.40956 +11 +5.33852 +21 +-2.40742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33852 +20 +-2.40742 +11 +5.34228 +21 +-2.40667 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34228 +20 +-2.40667 +11 +5.37772 +21 +-2.40667 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37772 +20 +-2.40667 +11 +5.38148 +21 +-2.40742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4451 +20 +-2.35894 +11 +6.44829 +21 +-2.36107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44829 +20 +-2.36107 +11 +6.45043 +21 +-2.36426 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45043 +20 +-2.36426 +11 +6.45118 +21 +-2.36803 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45118 +20 +-2.36803 +11 +6.45118 +21 +-2.40346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45118 +20 +-2.40346 +11 +6.45043 +21 +-2.40723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45043 +20 +-2.40723 +11 +6.44829 +21 +-2.41042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44829 +20 +-2.41042 +11 +6.4451 +21 +-2.41256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4451 +20 +-2.41256 +11 +6.44133 +21 +-2.41331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44133 +20 +-2.41331 +11 +6.42067 +21 +-2.41331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42067 +20 +-2.41331 +11 +6.4169 +21 +-2.41256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4169 +20 +-2.41256 +11 +6.41371 +21 +-2.41042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41371 +20 +-2.41042 +11 +6.41157 +21 +-2.40723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41157 +20 +-2.40723 +11 +6.41082 +21 +-2.40346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41082 +20 +-2.40346 +11 +6.41082 +21 +-2.36803 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41082 +20 +-2.36803 +11 +6.41157 +21 +-2.36426 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41157 +20 +-2.36426 +11 +6.41371 +21 +-2.36107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41371 +20 +-2.36107 +11 +6.4169 +21 +-2.35894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4169 +20 +-2.35894 +11 +6.42067 +21 +-2.35819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42067 +20 +-2.35819 +11 +6.44133 +21 +-2.35819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44133 +20 +-2.35819 +11 +6.4451 +21 +-2.35894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37325 +20 +-2.35894 +11 +6.37644 +21 +-2.36107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37644 +20 +-2.36107 +11 +6.37858 +21 +-2.36426 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37858 +20 +-2.36426 +11 +6.37933 +21 +-2.36803 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37933 +20 +-2.36803 +11 +6.37933 +21 +-2.40346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37933 +20 +-2.40346 +11 +6.37858 +21 +-2.40723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37858 +20 +-2.40723 +11 +6.37644 +21 +-2.41042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37644 +20 +-2.41042 +11 +6.37325 +21 +-2.41256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37325 +20 +-2.41256 +11 +6.36948 +21 +-2.41331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36948 +20 +-2.41331 +11 +6.34881 +21 +-2.41331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34881 +20 +-2.41331 +11 +6.34505 +21 +-2.41256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34505 +20 +-2.41256 +11 +6.34186 +21 +-2.41042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34186 +20 +-2.41042 +11 +6.33972 +21 +-2.40723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33972 +20 +-2.40723 +11 +6.33897 +21 +-2.40346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33897 +20 +-2.40346 +11 +6.33897 +21 +-2.36803 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33897 +20 +-2.36803 +11 +6.33972 +21 +-2.36426 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33972 +20 +-2.36426 +11 +6.34186 +21 +-2.36107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34186 +20 +-2.36107 +11 +6.34505 +21 +-2.35894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34505 +20 +-2.35894 +11 +6.34881 +21 +-2.35819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34881 +20 +-2.35819 +11 +6.36948 +21 +-2.35819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36948 +20 +-2.35819 +11 +6.37325 +21 +-2.35894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54247 +20 +-2.36441 +11 +6.54566 +21 +-2.36654 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54566 +20 +-2.36654 +11 +6.54779 +21 +-2.36974 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54779 +20 +-2.36974 +11 +6.54854 +21 +-2.3735 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54854 +20 +-2.3735 +11 +6.54854 +21 +-2.39319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54854 +20 +-2.39319 +11 +6.54779 +21 +-2.39696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54779 +20 +-2.39696 +11 +6.54566 +21 +-2.40015 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54566 +20 +-2.40015 +11 +6.54247 +21 +-2.40228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54247 +20 +-2.40228 +11 +6.5387 +21 +-2.40303 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5387 +20 +-2.40303 +11 +6.5013 +21 +-2.40303 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5013 +20 +-2.40303 +11 +6.49753 +21 +-2.40228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49753 +20 +-2.40228 +11 +6.49434 +21 +-2.40015 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49434 +20 +-2.40015 +11 +6.49221 +21 +-2.39696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49221 +20 +-2.39696 +11 +6.49146 +21 +-2.39319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49146 +20 +-2.39319 +11 +6.49146 +21 +-2.3735 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49146 +20 +-2.3735 +11 +6.49221 +21 +-2.36974 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49221 +20 +-2.36974 +11 +6.49434 +21 +-2.36654 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49434 +20 +-2.36654 +11 +6.49753 +21 +-2.36441 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49753 +20 +-2.36441 +11 +6.5013 +21 +-2.36366 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5013 +20 +-2.36366 +11 +6.5387 +21 +-2.36366 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5387 +20 +-2.36366 +11 +6.54247 +21 +-2.36441 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38148 +20 +-2.33557 +11 +5.38468 +21 +-2.33771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38468 +20 +-2.33771 +11 +5.38681 +21 +-2.3409 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38681 +20 +-2.3409 +11 +5.38756 +21 +-2.34467 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38756 +20 +-2.34467 +11 +5.38756 +21 +-2.36533 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38756 +20 +-2.36533 +11 +5.38681 +21 +-2.3691 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38681 +20 +-2.3691 +11 +5.38468 +21 +-2.37229 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38468 +20 +-2.37229 +11 +5.38148 +21 +-2.37443 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38148 +20 +-2.37443 +11 +5.37772 +21 +-2.37518 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37772 +20 +-2.37518 +11 +5.34228 +21 +-2.37518 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34228 +20 +-2.37518 +11 +5.33852 +21 +-2.37443 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33852 +20 +-2.37443 +11 +5.33532 +21 +-2.37229 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33532 +20 +-2.37229 +11 +5.33319 +21 +-2.3691 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33319 +20 +-2.3691 +11 +5.33244 +21 +-2.36533 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33244 +20 +-2.36533 +11 +5.33244 +21 +-2.34467 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33244 +20 +-2.34467 +11 +5.33319 +21 +-2.3409 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33319 +20 +-2.3409 +11 +5.33532 +21 +-2.33771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33532 +20 +-2.33771 +11 +5.33852 +21 +-2.33557 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33852 +20 +-2.33557 +11 +5.34228 +21 +-2.33482 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34228 +20 +-2.33482 +11 +5.37772 +21 +-2.33482 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37772 +20 +-2.33482 +11 +5.38148 +21 +-2.33557 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94601 +20 +-2.29221 +11 +5.9492 +21 +-2.29434 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9492 +20 +-2.29434 +11 +5.95134 +21 +-2.29753 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95134 +20 +-2.29753 +11 +5.95209 +21 +-2.3013 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95209 +20 +-2.3013 +11 +5.95209 +21 +-2.3387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95209 +20 +-2.3387 +11 +5.95134 +21 +-2.34247 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95134 +20 +-2.34247 +11 +5.9492 +21 +-2.34566 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9492 +20 +-2.34566 +11 +5.94601 +21 +-2.34779 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94601 +20 +-2.34779 +11 +5.94224 +21 +-2.34854 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94224 +20 +-2.34854 +11 +5.92256 +21 +-2.34854 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92256 +20 +-2.34854 +11 +5.91879 +21 +-2.34779 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91879 +20 +-2.34779 +11 +5.9156 +21 +-2.34566 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9156 +20 +-2.34566 +11 +5.91347 +21 +-2.34247 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91347 +20 +-2.34247 +11 +5.91272 +21 +-2.3387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91272 +20 +-2.3387 +11 +5.91272 +21 +-2.3013 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91272 +20 +-2.3013 +11 +5.91347 +21 +-2.29753 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91347 +20 +-2.29753 +11 +5.9156 +21 +-2.29434 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9156 +20 +-2.29434 +11 +5.91879 +21 +-2.29221 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91879 +20 +-2.29221 +11 +5.92256 +21 +-2.29146 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92256 +20 +-2.29146 +11 +5.94224 +21 +-2.29146 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94224 +20 +-2.29146 +11 +5.94601 +21 +-2.29221 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87121 +20 +-2.29221 +11 +5.8744 +21 +-2.29434 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8744 +20 +-2.29434 +11 +5.87653 +21 +-2.29753 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87653 +20 +-2.29753 +11 +5.87728 +21 +-2.3013 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87728 +20 +-2.3013 +11 +5.87728 +21 +-2.3387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87728 +20 +-2.3387 +11 +5.87653 +21 +-2.34247 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87653 +20 +-2.34247 +11 +5.8744 +21 +-2.34566 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8744 +20 +-2.34566 +11 +5.87121 +21 +-2.34779 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87121 +20 +-2.34779 +11 +5.86744 +21 +-2.34854 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86744 +20 +-2.34854 +11 +5.84776 +21 +-2.34854 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84776 +20 +-2.34854 +11 +5.84399 +21 +-2.34779 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84399 +20 +-2.34779 +11 +5.8408 +21 +-2.34566 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8408 +20 +-2.34566 +11 +5.83866 +21 +-2.34247 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83866 +20 +-2.34247 +11 +5.83791 +21 +-2.3387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83791 +20 +-2.3387 +11 +5.83791 +21 +-2.3013 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83791 +20 +-2.3013 +11 +5.83866 +21 +-2.29753 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83866 +20 +-2.29753 +11 +5.8408 +21 +-2.29434 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8408 +20 +-2.29434 +11 +5.84399 +21 +-2.29221 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84399 +20 +-2.29221 +11 +5.84776 +21 +-2.29146 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84776 +20 +-2.29146 +11 +5.86744 +21 +-2.29146 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86744 +20 +-2.29146 +11 +5.87121 +21 +-2.29221 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38148 +20 +-2.2715 +11 +5.38468 +21 +-2.27363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38468 +20 +-2.27363 +11 +5.38681 +21 +-2.27682 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38681 +20 +-2.27682 +11 +5.38756 +21 +-2.28059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38756 +20 +-2.28059 +11 +5.38756 +21 +-2.30126 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38756 +20 +-2.30126 +11 +5.38681 +21 +-2.30503 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38681 +20 +-2.30503 +11 +5.38468 +21 +-2.30822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38468 +20 +-2.30822 +11 +5.38148 +21 +-2.31035 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38148 +20 +-2.31035 +11 +5.37772 +21 +-2.3111 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37772 +20 +-2.3111 +11 +5.34228 +21 +-2.3111 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34228 +20 +-2.3111 +11 +5.33852 +21 +-2.31035 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33852 +20 +-2.31035 +11 +5.33532 +21 +-2.30822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33532 +20 +-2.30822 +11 +5.33319 +21 +-2.30503 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33319 +20 +-2.30503 +11 +5.33244 +21 +-2.30126 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33244 +20 +-2.30126 +11 +5.33244 +21 +-2.28059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33244 +20 +-2.28059 +11 +5.33319 +21 +-2.27682 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33319 +20 +-2.27682 +11 +5.33532 +21 +-2.27363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33532 +20 +-2.27363 +11 +5.33852 +21 +-2.2715 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33852 +20 +-2.2715 +11 +5.34228 +21 +-2.27075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34228 +20 +-2.27075 +11 +5.37772 +21 +-2.27075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37772 +20 +-2.27075 +11 +5.38148 +21 +-2.2715 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98072 +20 +-2.18108 +11 +5.98597 +21 +-2.18304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98597 +20 +-2.18304 +11 +5.99045 +21 +-2.1864 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99045 +20 +-2.1864 +11 +5.99381 +21 +-2.19088 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99381 +20 +-2.19088 +11 +5.99577 +21 +-2.19613 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99577 +20 +-2.19613 +11 +5.99622 +21 +-2.20031 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99622 +20 +-2.20031 +11 +5.99622 +21 +-2.23969 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99622 +20 +-2.23969 +11 +5.99577 +21 +-2.24387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99577 +20 +-2.24387 +11 +5.99381 +21 +-2.24912 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99381 +20 +-2.24912 +11 +5.99045 +21 +-2.2536 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99045 +20 +-2.2536 +11 +5.98597 +21 +-2.25696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98597 +20 +-2.25696 +11 +5.98072 +21 +-2.25892 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98072 +20 +-2.25892 +11 +5.97654 +21 +-2.25937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97654 +20 +-2.25937 +11 +5.93717 +21 +-2.25937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93717 +20 +-2.25937 +11 +5.93298 +21 +-2.25892 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93298 +20 +-2.25892 +11 +5.92773 +21 +-2.25696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92773 +20 +-2.25696 +11 +5.92325 +21 +-2.2536 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92325 +20 +-2.2536 +11 +5.91989 +21 +-2.24912 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91989 +20 +-2.24912 +11 +5.91793 +21 +-2.24387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91793 +20 +-2.24387 +11 +5.91748 +21 +-2.23969 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91748 +20 +-2.23969 +11 +5.91748 +21 +-2.20031 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91748 +20 +-2.20031 +11 +5.91793 +21 +-2.19613 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91793 +20 +-2.19613 +11 +5.91989 +21 +-2.19088 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91989 +20 +-2.19088 +11 +5.92325 +21 +-2.1864 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92325 +20 +-2.1864 +11 +5.92773 +21 +-2.18304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92773 +20 +-2.18304 +11 +5.93298 +21 +-2.18108 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93298 +20 +-2.18108 +11 +5.93717 +21 +-2.18063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93717 +20 +-2.18063 +11 +5.97654 +21 +-2.18063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97654 +20 +-2.18063 +11 +5.98072 +21 +-2.18108 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.58702 +20 +-2.18108 +11 +5.59227 +21 +-2.18304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59227 +20 +-2.18304 +11 +5.59675 +21 +-2.1864 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59675 +20 +-2.1864 +11 +5.60011 +21 +-2.19088 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60011 +20 +-2.19088 +11 +5.60207 +21 +-2.19613 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60207 +20 +-2.19613 +11 +5.60252 +21 +-2.20031 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60252 +20 +-2.20031 +11 +5.60252 +21 +-2.23969 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60252 +20 +-2.23969 +11 +5.60207 +21 +-2.24387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60207 +20 +-2.24387 +11 +5.60011 +21 +-2.24912 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60011 +20 +-2.24912 +11 +5.59675 +21 +-2.2536 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59675 +20 +-2.2536 +11 +5.59227 +21 +-2.25696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59227 +20 +-2.25696 +11 +5.58702 +21 +-2.25892 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.58702 +20 +-2.25892 +11 +5.58283 +21 +-2.25937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.58283 +20 +-2.25937 +11 +5.54346 +21 +-2.25937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54346 +20 +-2.25937 +11 +5.53928 +21 +-2.25892 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53928 +20 +-2.25892 +11 +5.53403 +21 +-2.25696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53403 +20 +-2.25696 +11 +5.52955 +21 +-2.2536 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52955 +20 +-2.2536 +11 +5.52619 +21 +-2.24912 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52619 +20 +-2.24912 +11 +5.52423 +21 +-2.24387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52423 +20 +-2.24387 +11 +5.52378 +21 +-2.23969 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52378 +20 +-2.23969 +11 +5.52378 +21 +-2.20031 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52378 +20 +-2.20031 +11 +5.52423 +21 +-2.19613 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52423 +20 +-2.19613 +11 +5.52619 +21 +-2.19088 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52619 +20 +-2.19088 +11 +5.52955 +21 +-2.1864 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52955 +20 +-2.1864 +11 +5.53403 +21 +-2.18304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53403 +20 +-2.18304 +11 +5.53928 +21 +-2.18108 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53928 +20 +-2.18108 +11 +5.54346 +21 +-2.18063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54346 +20 +-2.18063 +11 +5.58283 +21 +-2.18063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.58283 +20 +-2.18063 +11 +5.58702 +21 +-2.18108 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13503 +20 +-2.19319 +11 +6.13822 +21 +-2.19532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13822 +20 +-2.19532 +11 +6.14035 +21 +-2.19852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14035 +20 +-2.19852 +11 +6.1411 +21 +-2.20228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1411 +20 +-2.20228 +11 +6.1411 +21 +-2.23772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1411 +20 +-2.23772 +11 +6.14035 +21 +-2.24148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14035 +20 +-2.24148 +11 +6.13822 +21 +-2.24468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13822 +20 +-2.24468 +11 +6.13503 +21 +-2.24681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13503 +20 +-2.24681 +11 +6.13126 +21 +-2.24756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13126 +20 +-2.24756 +11 +6.11059 +21 +-2.24756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11059 +20 +-2.24756 +11 +6.10682 +21 +-2.24681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10682 +20 +-2.24681 +11 +6.10363 +21 +-2.24468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10363 +20 +-2.24468 +11 +6.1015 +21 +-2.24148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1015 +20 +-2.24148 +11 +6.10075 +21 +-2.23772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10075 +20 +-2.23772 +11 +6.10075 +21 +-2.20228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10075 +20 +-2.20228 +11 +6.1015 +21 +-2.19852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1015 +20 +-2.19852 +11 +6.10363 +21 +-2.19532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10363 +20 +-2.19532 +11 +6.10682 +21 +-2.19319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10682 +20 +-2.19319 +11 +6.11059 +21 +-2.19244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11059 +20 +-2.19244 +11 +6.13126 +21 +-2.19244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13126 +20 +-2.19244 +11 +6.13503 +21 +-2.19319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06318 +20 +-2.19319 +11 +6.06637 +21 +-2.19532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06637 +20 +-2.19532 +11 +6.0685 +21 +-2.19852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0685 +20 +-2.19852 +11 +6.06925 +21 +-2.20228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06925 +20 +-2.20228 +11 +6.06925 +21 +-2.23772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06925 +20 +-2.23772 +11 +6.0685 +21 +-2.24148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0685 +20 +-2.24148 +11 +6.06637 +21 +-2.24468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06637 +20 +-2.24468 +11 +6.06318 +21 +-2.24681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06318 +20 +-2.24681 +11 +6.05941 +21 +-2.24756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05941 +20 +-2.24756 +11 +6.03874 +21 +-2.24756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03874 +20 +-2.24756 +11 +6.03497 +21 +-2.24681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03497 +20 +-2.24681 +11 +6.03178 +21 +-2.24468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03178 +20 +-2.24468 +11 +6.02965 +21 +-2.24148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02965 +20 +-2.24148 +11 +6.0289 +21 +-2.23772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0289 +20 +-2.23772 +11 +6.0289 +21 +-2.20228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0289 +20 +-2.20228 +11 +6.02965 +21 +-2.19852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02965 +20 +-2.19852 +11 +6.03178 +21 +-2.19532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03178 +20 +-2.19532 +11 +6.03497 +21 +-2.19319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03497 +20 +-2.19319 +11 +6.03874 +21 +-2.19244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03874 +20 +-2.19244 +11 +6.05941 +21 +-2.19244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05941 +20 +-2.19244 +11 +6.06318 +21 +-2.19319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38148 +20 +-2.19965 +11 +5.38468 +21 +-2.20178 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38468 +20 +-2.20178 +11 +5.38681 +21 +-2.20497 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38681 +20 +-2.20497 +11 +5.38756 +21 +-2.20874 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38756 +20 +-2.20874 +11 +5.38756 +21 +-2.22941 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38756 +20 +-2.22941 +11 +5.38681 +21 +-2.23318 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38681 +20 +-2.23318 +11 +5.38468 +21 +-2.23637 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38468 +20 +-2.23637 +11 +5.38148 +21 +-2.2385 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38148 +20 +-2.2385 +11 +5.37772 +21 +-2.23925 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37772 +20 +-2.23925 +11 +5.34228 +21 +-2.23925 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34228 +20 +-2.23925 +11 +5.33852 +21 +-2.2385 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33852 +20 +-2.2385 +11 +5.33532 +21 +-2.23637 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33532 +20 +-2.23637 +11 +5.33319 +21 +-2.23318 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33319 +20 +-2.23318 +11 +5.33244 +21 +-2.22941 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33244 +20 +-2.22941 +11 +5.33244 +21 +-2.20874 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33244 +20 +-2.20874 +11 +5.33319 +21 +-2.20497 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33319 +20 +-2.20497 +11 +5.33532 +21 +-2.20178 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33532 +20 +-2.20178 +11 +5.33852 +21 +-2.19965 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33852 +20 +-2.19965 +11 +5.34228 +21 +-2.1989 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34228 +20 +-2.1989 +11 +5.37772 +21 +-2.1989 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37772 +20 +-2.1989 +11 +5.38148 +21 +-2.19965 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60543 +20 +-1.97116 +11 +6.61438 +21 +-1.97356 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61438 +20 +-1.97356 +11 +6.62278 +21 +-1.97747 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62278 +20 +-1.97747 +11 +6.63037 +21 +-1.98278 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63037 +20 +-1.98278 +11 +6.63692 +21 +-1.98934 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63692 +20 +-1.98934 +11 +6.64223 +21 +-1.99692 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64223 +20 +-1.99692 +11 +6.64615 +21 +-2.00532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64615 +20 +-2.00532 +11 +6.64855 +21 +-2.01427 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64855 +20 +-2.01427 +11 +6.64935 +21 +-2.0235 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64935 +20 +-2.0235 +11 +6.64855 +21 +-2.03273 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64855 +20 +-2.03273 +11 +6.64615 +21 +-2.04168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64615 +20 +-2.04168 +11 +6.64223 +21 +-2.05007 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64223 +20 +-2.05007 +11 +6.63692 +21 +-2.05766 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63692 +20 +-2.05766 +11 +6.63037 +21 +-2.06421 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63037 +20 +-2.06421 +11 +6.62278 +21 +-2.06953 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62278 +20 +-2.06953 +11 +6.61438 +21 +-2.07344 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61438 +20 +-2.07344 +11 +6.60543 +21 +-2.07584 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60543 +20 +-2.07584 +11 +6.59621 +21 +-2.07665 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59621 +20 +-2.07665 +11 +6.56471 +21 +-2.07665 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56471 +20 +-2.07665 +11 +6.55548 +21 +-2.07584 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55548 +20 +-2.07584 +11 +6.54653 +21 +-2.07344 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54653 +20 +-2.07344 +11 +6.53813 +21 +-2.06953 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53813 +20 +-2.06953 +11 +6.53055 +21 +-2.06421 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53055 +20 +-2.06421 +11 +6.52399 +21 +-2.05766 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52399 +20 +-2.05766 +11 +6.51868 +21 +-2.05007 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51868 +20 +-2.05007 +11 +6.51476 +21 +-2.04168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51476 +20 +-2.04168 +11 +6.51237 +21 +-2.03273 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51237 +20 +-2.03273 +11 +6.51156 +21 +-2.0235 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51156 +20 +-2.0235 +11 +6.51237 +21 +-2.01427 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51237 +20 +-2.01427 +11 +6.51476 +21 +-2.00532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51476 +20 +-2.00532 +11 +6.51868 +21 +-1.99692 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51868 +20 +-1.99692 +11 +6.52399 +21 +-1.98934 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52399 +20 +-1.98934 +11 +6.53055 +21 +-1.98278 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53055 +20 +-1.98278 +11 +6.53813 +21 +-1.97747 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53813 +20 +-1.97747 +11 +6.54653 +21 +-1.97356 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54653 +20 +-1.97356 +11 +6.55548 +21 +-1.97116 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55548 +20 +-1.97116 +11 +6.56471 +21 +-1.97035 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56471 +20 +-1.97035 +11 +6.59621 +21 +-1.97035 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59621 +20 +-1.97035 +11 +6.60543 +21 +-1.97116 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4637 +20 +-1.97116 +11 +5.47265 +21 +-1.97356 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47265 +20 +-1.97356 +11 +5.48105 +21 +-1.97747 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.48105 +20 +-1.97747 +11 +5.48864 +21 +-1.98278 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.48864 +20 +-1.98278 +11 +5.49519 +21 +-1.98934 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49519 +20 +-1.98934 +11 +5.5005 +21 +-1.99692 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5005 +20 +-1.99692 +11 +5.50442 +21 +-2.00532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50442 +20 +-2.00532 +11 +5.50682 +21 +-2.01427 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50682 +20 +-2.01427 +11 +5.50762 +21 +-2.0235 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50762 +20 +-2.0235 +11 +5.50682 +21 +-2.03273 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50682 +20 +-2.03273 +11 +5.50442 +21 +-2.04168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50442 +20 +-2.04168 +11 +5.5005 +21 +-2.05007 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5005 +20 +-2.05007 +11 +5.49519 +21 +-2.05766 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49519 +20 +-2.05766 +11 +5.48864 +21 +-2.06421 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.48864 +20 +-2.06421 +11 +5.48105 +21 +-2.06953 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.48105 +20 +-2.06953 +11 +5.47265 +21 +-2.07344 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47265 +20 +-2.07344 +11 +5.4637 +21 +-2.07584 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4637 +20 +-2.07584 +11 +5.45447 +21 +-2.07665 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45447 +20 +-2.07665 +11 +5.42298 +21 +-2.07665 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42298 +20 +-2.07665 +11 +5.41375 +21 +-2.07584 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41375 +20 +-2.07584 +11 +5.4048 +21 +-2.07344 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4048 +20 +-2.07344 +11 +5.3964 +21 +-2.06953 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3964 +20 +-2.06953 +11 +5.38881 +21 +-2.06421 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38881 +20 +-2.06421 +11 +5.38226 +21 +-2.05766 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38226 +20 +-2.05766 +11 +5.37695 +21 +-2.05007 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37695 +20 +-2.05007 +11 +5.37303 +21 +-2.04168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37303 +20 +-2.04168 +11 +5.37063 +21 +-2.03273 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37063 +20 +-2.03273 +11 +5.36983 +21 +-2.0235 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36983 +20 +-2.0235 +11 +5.37063 +21 +-2.01427 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37063 +20 +-2.01427 +11 +5.37303 +21 +-2.00532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37303 +20 +-2.00532 +11 +5.37695 +21 +-1.99692 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37695 +20 +-1.99692 +11 +5.38226 +21 +-1.98934 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38226 +20 +-1.98934 +11 +5.38881 +21 +-1.98278 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38881 +20 +-1.98278 +11 +5.3964 +21 +-1.97747 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3964 +20 +-1.97747 +11 +5.4048 +21 +-1.97356 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4048 +20 +-1.97356 +11 +5.41375 +21 +-1.97116 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41375 +20 +-1.97116 +11 +5.42298 +21 +-1.97035 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42298 +20 +-1.97035 +11 +5.45447 +21 +-1.97035 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45447 +20 +-1.97035 +11 +5.4637 +21 +-1.97116 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.76443 +20 +-1.89161 +11 +6.7726 +21 +-1.89225 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.7726 +20 +-1.89225 +11 +6.78057 +21 +-1.89417 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.78057 +20 +-1.89417 +11 +6.78814 +21 +-1.8973 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.78814 +20 +-1.8973 +11 +6.79512 +21 +-1.90158 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.79512 +20 +-1.90158 +11 +6.80135 +21 +-1.9069 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.80135 +20 +-1.9069 +11 +6.80667 +21 +-1.91313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.80667 +20 +-1.91313 +11 +6.81096 +21 +-1.92012 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81096 +20 +-1.92012 +11 +6.81409 +21 +-1.92769 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81409 +20 +-1.92769 +11 +6.816 +21 +-1.93566 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.816 +20 +-1.93566 +11 +6.81665 +21 +-1.94383 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81665 +20 +-1.94383 +11 +6.81665 +21 +-1.94383 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81665 +20 +-1.94383 +11 +6.81663 +21 +-1.94387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81663 +20 +-1.94387 +11 +6.81665 +21 +-1.94391 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81665 +20 +-1.94391 +11 +6.68447 +21 +-5.12373 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68447 +20 +-5.12373 +11 +6.68417 +21 +-5.12438 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68417 +20 +-5.12438 +11 +6.6839 +21 +-5.12504 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6839 +20 +-5.12504 +11 +6.68386 +21 +-5.12506 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68386 +20 +-5.12506 +11 +6.68384 +21 +-5.1251 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68384 +20 +-5.1251 +11 +6.68317 +21 +-5.12534 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68317 +20 +-5.12534 +11 +6.6825 +21 +-5.12562 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6825 +20 +-5.12562 +11 +6.67888 +21 +-5.12562 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67888 +20 +-5.12562 +11 +6.67888 +21 +-5.12562 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67888 +20 +-5.12562 +11 +6.67246 +21 +-5.12562 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67246 +20 +-5.12562 +11 +6.65969 +21 +-5.12706 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65969 +20 +-5.12706 +11 +6.64716 +21 +-5.12992 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64716 +20 +-5.12992 +11 +6.63503 +21 +-5.13416 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63503 +20 +-5.13416 +11 +6.62345 +21 +-5.13974 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62345 +20 +-5.13974 +11 +6.61257 +21 +-5.14657 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61257 +20 +-5.14657 +11 +6.60252 +21 +-5.15459 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60252 +20 +-5.15459 +11 +6.59343 +21 +-5.16367 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59343 +20 +-5.16367 +11 +6.58542 +21 +-5.17372 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58542 +20 +-5.17372 +11 +6.57858 +21 +-5.1846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57858 +20 +-5.1846 +11 +6.57301 +21 +-5.19618 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57301 +20 +-5.19618 +11 +6.56876 +21 +-5.20831 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56876 +20 +-5.20831 +11 +6.5659 +21 +-5.22084 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5659 +20 +-5.22084 +11 +6.56446 +21 +-5.23361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56446 +20 +-5.23361 +11 +6.56446 +21 +-5.24003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56446 +20 +-5.24003 +11 +6.56446 +21 +-5.24003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56446 +20 +-5.24003 +11 +6.56446 +21 +-5.24003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56446 +20 +-5.24003 +11 +6.56446 +21 +-5.24004 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56446 +20 +-5.24004 +11 +6.56409 +21 +-5.24119 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56409 +20 +-5.24119 +11 +6.56394 +21 +-5.2413 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56394 +20 +-5.2413 +11 +6.56389 +21 +-5.24143 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56389 +20 +-5.24143 +11 +6.5636 +21 +-5.24154 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5636 +20 +-5.24154 +11 +6.5631 +21 +-5.24191 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5631 +20 +-5.24191 +11 +6.56273 +21 +-5.24191 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56273 +20 +-5.24191 +11 +6.5625 +21 +-5.242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5625 +20 +-5.242 +11 +5.4575 +21 +-5.24193 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4575 +20 +-5.24193 +11 +5.45727 +21 +-5.24184 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45727 +20 +-5.24184 +11 +5.4569 +21 +-5.24184 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4569 +20 +-5.24184 +11 +5.4564 +21 +-5.24148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4564 +20 +-5.24148 +11 +5.45611 +21 +-5.24136 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45611 +20 +-5.24136 +11 +5.45606 +21 +-5.24123 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45606 +20 +-5.24123 +11 +5.45591 +21 +-5.24112 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45591 +20 +-5.24112 +11 +5.45554 +21 +-5.23997 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45554 +20 +-5.23997 +11 +5.45554 +21 +-5.23997 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45554 +20 +-5.23997 +11 +5.45554 +21 +-5.23997 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45554 +20 +-5.23997 +11 +5.45554 +21 +-5.23996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45554 +20 +-5.23996 +11 +5.45554 +21 +-5.23354 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45554 +20 +-5.23354 +11 +5.4541 +21 +-5.22077 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4541 +20 +-5.22077 +11 +5.45124 +21 +-5.20824 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45124 +20 +-5.20824 +11 +5.44699 +21 +-5.19611 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44699 +20 +-5.19611 +11 +5.44142 +21 +-5.18453 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44142 +20 +-5.18453 +11 +5.43458 +21 +-5.17365 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43458 +20 +-5.17365 +11 +5.42657 +21 +-5.1636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42657 +20 +-5.1636 +11 +5.41748 +21 +-5.15452 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41748 +20 +-5.15452 +11 +5.40743 +21 +-5.1465 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40743 +20 +-5.1465 +11 +5.39655 +21 +-5.13967 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39655 +20 +-5.13967 +11 +5.38497 +21 +-5.13409 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38497 +20 +-5.13409 +11 +5.37284 +21 +-5.12985 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37284 +20 +-5.12985 +11 +5.36031 +21 +-5.12699 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36031 +20 +-5.12699 +11 +5.34754 +21 +-5.12555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34754 +20 +-5.12555 +11 +5.34112 +21 +-5.12555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34112 +20 +-5.12555 +11 +5.3375 +21 +-5.12555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3375 +20 +-5.12555 +11 +5.33683 +21 +-5.12527 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33683 +20 +-5.12527 +11 +5.33616 +21 +-5.12503 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33616 +20 +-5.12503 +11 +5.33614 +21 +-5.12499 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33614 +20 +-5.12499 +11 +5.3361 +21 +-5.12497 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3361 +20 +-5.12497 +11 +5.33583 +21 +-5.12431 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33583 +20 +-5.12431 +11 +5.33553 +21 +-5.12366 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33553 +20 +-5.12366 +11 +5.20252 +21 +-1.94391 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20252 +20 +-1.94391 +11 +5.20253 +21 +-1.94387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20253 +20 +-1.94387 +11 +5.20252 +21 +-1.94383 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20252 +20 +-1.94383 +11 +5.20316 +21 +-1.93566 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20316 +20 +-1.93566 +11 +5.20507 +21 +-1.92769 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20507 +20 +-1.92769 +11 +5.20821 +21 +-1.92012 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20821 +20 +-1.92012 +11 +5.21249 +21 +-1.91313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.21249 +20 +-1.91313 +11 +5.21781 +21 +-1.9069 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.21781 +20 +-1.9069 +11 +5.22404 +21 +-1.90158 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.22404 +20 +-1.90158 +11 +5.23103 +21 +-1.8973 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.23103 +20 +-1.8973 +11 +5.2386 +21 +-1.89417 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.2386 +20 +-1.89417 +11 +5.24656 +21 +-1.89225 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.24656 +20 +-1.89225 +11 +5.25473 +21 +-1.89161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25473 +20 +-1.89161 +11 +5.25473 +21 +-1.89161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25473 +20 +-1.89161 +11 +6.76443 +21 +-1.89161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25473 +20 +-1.89555 +11 +5.25473 +21 +-1.89555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25473 +20 +-1.89555 +11 +5.25093 +21 +-1.89555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25093 +20 +-1.89555 +11 +5.24343 +21 +-1.89674 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.24343 +20 +-1.89674 +11 +5.2362 +21 +-1.89908 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.2362 +20 +-1.89908 +11 +5.22943 +21 +-1.90253 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.22943 +20 +-1.90253 +11 +5.22328 +21 +-1.907 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.22328 +20 +-1.907 +11 +5.21791 +21 +-1.91237 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.21791 +20 +-1.91237 +11 +5.21344 +21 +-1.91852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.21344 +20 +-1.91852 +11 +5.20999 +21 +-1.92529 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20999 +20 +-1.92529 +11 +5.20764 +21 +-1.93252 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20764 +20 +-1.93252 +11 +5.20645 +21 +-1.94003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20645 +20 +-1.94003 +11 +5.20645 +21 +-1.94379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20645 +20 +-1.94379 +11 +5.33938 +21 +-5.12161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33938 +20 +-5.12161 +11 +5.34112 +21 +-5.12161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34112 +20 +-5.12161 +11 +5.35349 +21 +-5.12226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.35349 +20 +-5.12226 +11 +5.36573 +21 +-5.1242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36573 +20 +-5.1242 +11 +5.37769 +21 +-5.1274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37769 +20 +-5.1274 +11 +5.38926 +21 +-5.13184 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38926 +20 +-5.13184 +11 +5.4003 +21 +-5.13747 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4003 +20 +-5.13747 +11 +5.41069 +21 +-5.14421 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41069 +20 +-5.14421 +11 +5.42031 +21 +-5.15201 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42031 +20 +-5.15201 +11 +5.42907 +21 +-5.16077 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42907 +20 +-5.16077 +11 +5.43687 +21 +-5.1704 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43687 +20 +-5.1704 +11 +5.44362 +21 +-5.18079 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44362 +20 +-5.18079 +11 +5.44924 +21 +-5.19183 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44924 +20 +-5.19183 +11 +5.45368 +21 +-5.20339 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45368 +20 +-5.20339 +11 +5.45689 +21 +-5.21536 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45689 +20 +-5.21536 +11 +5.45882 +21 +-5.22759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45882 +20 +-5.22759 +11 +5.45937 +21 +-5.238 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45937 +20 +-5.238 +11 +6.56063 +21 +-5.23807 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56063 +20 +-5.23807 +11 +6.56118 +21 +-5.22766 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56118 +20 +-5.22766 +11 +6.56311 +21 +-5.21543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56311 +20 +-5.21543 +11 +6.56632 +21 +-5.20346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56632 +20 +-5.20346 +11 +6.57076 +21 +-5.1919 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57076 +20 +-5.1919 +11 +6.57638 +21 +-5.18086 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57638 +20 +-5.18086 +11 +6.58313 +21 +-5.17047 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58313 +20 +-5.17047 +11 +6.59093 +21 +-5.16084 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59093 +20 +-5.16084 +11 +6.59969 +21 +-5.15208 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59969 +20 +-5.15208 +11 +6.60932 +21 +-5.14428 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60932 +20 +-5.14428 +11 +6.6197 +21 +-5.13754 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6197 +20 +-5.13754 +11 +6.63074 +21 +-5.13191 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63074 +20 +-5.13191 +11 +6.64231 +21 +-5.12747 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64231 +20 +-5.12747 +11 +6.65428 +21 +-5.12427 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65428 +20 +-5.12427 +11 +6.66651 +21 +-5.12233 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66651 +20 +-5.12233 +11 +6.67888 +21 +-5.12168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67888 +20 +-5.12168 +11 +6.67888 +21 +-5.12168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67888 +20 +-5.12168 +11 +6.68062 +21 +-5.12168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68062 +20 +-5.12168 +11 +6.81271 +21 +-1.9438 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81271 +20 +-1.9438 +11 +6.81271 +21 +-1.94003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81271 +20 +-1.94003 +11 +6.81152 +21 +-1.93252 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81152 +20 +-1.93252 +11 +6.80917 +21 +-1.92529 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.80917 +20 +-1.92529 +11 +6.80572 +21 +-1.91852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.80572 +20 +-1.91852 +11 +6.80126 +21 +-1.91237 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.80126 +20 +-1.91237 +11 +6.79588 +21 +-1.907 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.79588 +20 +-1.907 +11 +6.78973 +21 +-1.90253 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.78973 +20 +-1.90253 +11 +6.78296 +21 +-1.89908 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.78296 +20 +-1.89908 +11 +6.77573 +21 +-1.89674 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.77573 +20 +-1.89674 +11 +6.76823 +21 +-1.89555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.76823 +20 +-1.89555 +11 +6.76443 +21 +-1.89555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.76443 +20 +-1.89555 +11 +5.25473 +21 +-1.89555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25473 +20 +-1.89555 +11 +5.25473 +21 +-1.89555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25473 +20 +-1.89555 +11 +5.25473 +21 +-1.89555 + 0 +ENDSEC + 0 +EOF diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/DXF/StudioMic-F_Paste.dxf b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/DXF/StudioMic-F_Paste.dxf new file mode 100755 index 0000000..e69de29 diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/DXF/StudioMic-F_Silkscreen.dxf b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/DXF/StudioMic-F_Silkscreen.dxf new file mode 100755 index 0000000..df9419e --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/DXF/StudioMic-F_Silkscreen.dxf @@ -0,0 +1,158684 @@ + 0 +SECTION + 2 +HEADER + 9 +$ANGBASE + 50 +0.0 + 9 +$ANGDIR + 70 +1 + 9 +$MEASUREMENT + 70 +0 + 0 +ENDSEC + 0 +SECTION + 2 +TABLES + 0 +TABLE + 2 +LTYPE + 70 +4 + 0 +LTYPE + 5 +40F + 2 +CONTINUOUS + 70 +0 + 3 +Solid line + 72 +65 + 73 +0 + 40 +0.0 + 0 +LTYPE + 5 +410 + 2 +DASHDOT + 70 +0 + 3 +Dash Dot ____ _ ____ _ + 72 +65 + 73 +4 + 40 +2.0 + 49 +1.25 + 49 +-0.25 + 49 +0.25 + 49 +-0.25 + 0 +LTYPE + 5 +411 + 2 +DASHED + 70 +0 + 3 +Dashed __ __ __ __ __ + 72 +65 + 73 +2 + 40 +0.75 + 49 +0.5 + 49 +-0.25 + 0 +LTYPE + 5 +43B + 2 +DOTTED + 70 +0 + 3 +Dotted . . . . + 72 +65 + 73 +2 + 40 +0.2 + 49 +0.0 + 49 +-0.2 + 0 +ENDTAB + 0 +TABLE + 2 +STYLE + 70 +4 + 0 +STYLE + 2 +KICAD + 70 +0 + 40 +0 + 41 +1 + 42 +1 + 50 +0 + 71 +0 + 3 +isocp.shx + 0 +STYLE + 2 +KICADB + 70 +0 + 40 +0 + 41 +1 + 42 +1 + 50 +0 + 71 +0 + 3 +isocp.shx + 0 +STYLE + 2 +KICADI + 70 +0 + 40 +0 + 41 +1 + 42 +1 + 50 +15 + 71 +0 + 3 +isocp.shx + 0 +STYLE + 2 +KICADBI + 70 +0 + 40 +0 + 41 +1 + 42 +1 + 50 +15 + 71 +0 + 3 +isocp.shx + 0 +ENDTAB + 0 +TABLE + 2 +LAYER + 70 +1 + 0 +LAYER + 2 +BLACK + 70 +0 + 62 +7 + 6 +CONTINUOUS + 0 +ENDTAB + 0 +ENDSEC + 0 +SECTION + 2 +ENTITIES +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81119 +20 +-4.99421 +11 +5.78362 +21 +-4.99421 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78362 +20 +-4.99421 +11 +5.76056 +21 +-4.99421 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76056 +20 +-4.99421 +11 +5.75535 +21 +-4.99421 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75535 +20 +-4.99421 +11 +5.75151 +21 +-4.99402 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75151 +20 +-4.99402 +11 +5.7477 +21 +-4.99345 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7477 +20 +-4.99345 +11 +5.74397 +21 +-4.99252 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74397 +20 +-4.99252 +11 +5.74035 +21 +-4.99122 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74035 +20 +-4.99122 +11 +5.73687 +21 +-4.98958 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73687 +20 +-4.98958 +11 +5.73357 +21 +-4.9876 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73357 +20 +-4.9876 +11 +5.73048 +21 +-4.98531 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73048 +20 +-4.98531 +11 +5.72763 +21 +-4.98272 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72763 +20 +-4.98272 +11 +5.72505 +21 +-4.97987 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72505 +20 +-4.97987 +11 +5.72275 +21 +-4.97678 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72275 +20 +-4.97678 +11 +5.72078 +21 +-4.97348 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72078 +20 +-4.97348 +11 +5.71913 +21 +-4.97 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71913 +20 +-4.97 +11 +5.71783 +21 +-4.96638 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71783 +20 +-4.96638 +11 +5.7169 +21 +-4.96265 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7169 +20 +-4.96265 +11 +5.71633 +21 +-4.95884 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71633 +20 +-4.95884 +11 +5.71615 +21 +-4.955 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71615 +20 +-4.955 +11 +5.71633 +21 +-4.95116 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71633 +20 +-4.95116 +11 +5.7169 +21 +-4.94735 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7169 +20 +-4.94735 +11 +5.71783 +21 +-4.94362 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71783 +20 +-4.94362 +11 +5.71913 +21 +-4.94 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71913 +20 +-4.94 +11 +5.72078 +21 +-4.93652 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72078 +20 +-4.93652 +11 +5.72275 +21 +-4.93322 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72275 +20 +-4.93322 +11 +5.72505 +21 +-4.93013 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72505 +20 +-4.93013 +11 +5.72763 +21 +-4.92728 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72763 +20 +-4.92728 +11 +5.73048 +21 +-4.92469 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73048 +20 +-4.92469 +11 +5.73357 +21 +-4.9224 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73357 +20 +-4.9224 +11 +5.73687 +21 +-4.92042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73687 +20 +-4.92042 +11 +5.74035 +21 +-4.91878 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74035 +20 +-4.91878 +11 +5.74397 +21 +-4.91748 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74397 +20 +-4.91748 +11 +5.7477 +21 +-4.91655 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7477 +20 +-4.91655 +11 +5.75151 +21 +-4.91598 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75151 +20 +-4.91598 +11 +5.75535 +21 +-4.91579 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75535 +20 +-4.91579 +11 +5.76056 +21 +-4.91579 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76056 +20 +-4.91579 +11 +5.85944 +21 +-4.91579 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85944 +20 +-4.91579 +11 +5.86465 +21 +-4.91579 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86465 +20 +-4.91579 +11 +5.86849 +21 +-4.91598 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86849 +20 +-4.91598 +11 +5.8723 +21 +-4.91655 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8723 +20 +-4.91655 +11 +5.87603 +21 +-4.91748 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87603 +20 +-4.91748 +11 +5.87965 +21 +-4.91878 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87965 +20 +-4.91878 +11 +5.88313 +21 +-4.92042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88313 +20 +-4.92042 +11 +5.88643 +21 +-4.9224 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88643 +20 +-4.9224 +11 +5.88952 +21 +-4.92469 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88952 +20 +-4.92469 +11 +5.89237 +21 +-4.92728 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89237 +20 +-4.92728 +11 +5.89495 +21 +-4.93013 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89495 +20 +-4.93013 +11 +5.89725 +21 +-4.93322 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89725 +20 +-4.93322 +11 +5.89922 +21 +-4.93652 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89922 +20 +-4.93652 +11 +5.90087 +21 +-4.94 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90087 +20 +-4.94 +11 +5.90217 +21 +-4.94362 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90217 +20 +-4.94362 +11 +5.9031 +21 +-4.94735 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9031 +20 +-4.94735 +11 +5.90367 +21 +-4.95116 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90367 +20 +-4.95116 +11 +5.90385 +21 +-4.955 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90385 +20 +-4.955 +11 +5.90367 +21 +-4.95884 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90367 +20 +-4.95884 +11 +5.9031 +21 +-4.96265 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9031 +20 +-4.96265 +11 +5.90217 +21 +-4.96638 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90217 +20 +-4.96638 +11 +5.90087 +21 +-4.97 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90087 +20 +-4.97 +11 +5.89922 +21 +-4.97348 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89922 +20 +-4.97348 +11 +5.89725 +21 +-4.97678 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89725 +20 +-4.97678 +11 +5.89495 +21 +-4.97987 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89495 +20 +-4.97987 +11 +5.89237 +21 +-4.98272 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89237 +20 +-4.98272 +11 +5.88952 +21 +-4.98531 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88952 +20 +-4.98531 +11 +5.88643 +21 +-4.9876 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88643 +20 +-4.9876 +11 +5.88313 +21 +-4.98958 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88313 +20 +-4.98958 +11 +5.87965 +21 +-4.99122 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87965 +20 +-4.99122 +11 +5.87603 +21 +-4.99252 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87603 +20 +-4.99252 +11 +5.8723 +21 +-4.99345 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8723 +20 +-4.99345 +11 +5.86849 +21 +-4.99402 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86849 +20 +-4.99402 +11 +5.86465 +21 +-4.99421 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86465 +20 +-4.99421 +11 +5.85944 +21 +-4.99421 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85944 +20 +-4.99421 +11 +5.85387 +21 +-4.99421 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85387 +20 +-4.99421 +11 +5.81119 +21 +-4.99421 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78362 +20 +-4.97831 +11 +5.78855 +21 +-4.97797 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78855 +20 +-4.97797 +11 +5.79281 +21 +-4.97695 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79281 +20 +-4.97695 +11 +5.79642 +21 +-4.97525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79642 +20 +-4.97525 +11 +5.79937 +21 +-4.97288 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79937 +20 +-4.97288 +11 +5.80112 +21 +-4.96906 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80112 +20 +-4.96906 +11 +5.80112 +21 +-4.95531 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80112 +20 +-4.95531 +11 +5.8005 +21 +-4.95181 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8005 +20 +-4.95181 +11 +5.79638 +21 +-4.95006 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79638 +20 +-4.95006 +11 +5.78538 +21 +-4.95006 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78538 +20 +-4.95006 +11 +5.78238 +21 +-4.95062 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78238 +20 +-4.95062 +11 +5.78134 +21 +-4.952 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78134 +20 +-4.952 +11 +5.78106 +21 +-4.95466 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78106 +20 +-4.95466 +11 +5.78131 +21 +-4.95728 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78131 +20 +-4.95728 +11 +5.78238 +21 +-4.95875 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78238 +20 +-4.95875 +11 +5.78512 +21 +-4.95925 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78512 +20 +-4.95925 +11 +5.79006 +21 +-4.95925 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79006 +20 +-4.95925 +11 +5.79006 +21 +-4.96606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79006 +20 +-4.96606 +11 +5.78714 +21 +-4.96691 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78714 +20 +-4.96691 +11 +5.78388 +21 +-4.96719 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78388 +20 +-4.96719 +11 +5.77937 +21 +-4.96624 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77937 +20 +-4.96624 +11 +5.77537 +21 +-4.96341 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77537 +20 +-4.96341 +11 +5.77329 +21 +-4.9607 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77329 +20 +-4.9607 +11 +5.77204 +21 +-4.95764 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77204 +20 +-4.95764 +11 +5.77163 +21 +-4.95422 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77163 +20 +-4.95422 +11 +5.77255 +21 +-4.94933 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77255 +20 +-4.94933 +11 +5.77531 +21 +-4.94547 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77531 +20 +-4.94547 +11 +5.77927 +21 +-4.94296 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77927 +20 +-4.94296 +11 +5.78375 +21 +-4.94212 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78375 +20 +-4.94212 +11 +5.78712 +21 +-4.94255 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78712 +20 +-4.94255 +11 +5.79 +21 +-4.94384 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79 +20 +-4.94384 +11 +5.79381 +21 +-4.94556 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79381 +20 +-4.94556 +11 +5.79592 +21 +-4.94473 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79592 +20 +-4.94473 +11 +5.79825 +21 +-4.94225 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79825 +20 +-4.94225 +11 +5.79969 +21 +-4.93872 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79969 +20 +-4.93872 +11 +5.798 +21 +-4.93594 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.798 +20 +-4.93594 +11 +5.79353 +21 +-4.93323 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79353 +20 +-4.93323 +11 +5.78889 +21 +-4.9316 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78889 +20 +-4.9316 +11 +5.78406 +21 +-4.93106 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78406 +20 +-4.93106 +11 +5.77947 +21 +-4.93148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77947 +20 +-4.93148 +11 +5.77519 +21 +-4.93273 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77519 +20 +-4.93273 +11 +5.77122 +21 +-4.93481 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77122 +20 +-4.93481 +11 +5.76756 +21 +-4.93772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76756 +20 +-4.93772 +11 +5.7645 +21 +-4.94125 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7645 +20 +-4.94125 +11 +5.76231 +21 +-4.9452 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76231 +20 +-4.9452 +11 +5.761 +21 +-4.94955 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.761 +20 +-4.94955 +11 +5.76056 +21 +-4.95431 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76056 +20 +-4.95431 +11 +5.76099 +21 +-4.9591 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76099 +20 +-4.9591 +11 +5.76228 +21 +-4.96352 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76228 +20 +-4.96352 +11 +5.76443 +21 +-4.96758 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76443 +20 +-4.96758 +11 +5.76744 +21 +-4.97128 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76744 +20 +-4.97128 +11 +5.77103 +21 +-4.97436 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77103 +20 +-4.97436 +11 +5.77492 +21 +-4.97655 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77492 +20 +-4.97655 +11 +5.77912 +21 +-4.97787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77912 +20 +-4.97787 +11 +5.78362 +21 +-4.97831 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81119 +20 +-4.98119 +11 +5.81291 +21 +-4.98072 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81291 +20 +-4.98072 +11 +5.81384 +21 +-4.97975 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81384 +20 +-4.97975 +11 +5.81462 +21 +-4.97819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81462 +20 +-4.97819 +11 +5.83469 +21 +-4.9365 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83469 +20 +-4.9365 +11 +5.83556 +21 +-4.93337 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83556 +20 +-4.93337 +11 +5.83472 +21 +-4.93152 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83472 +20 +-4.93152 +11 +5.83219 +21 +-4.92981 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83219 +20 +-4.92981 +11 +5.82903 +21 +-4.92881 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82903 +20 +-4.92881 +11 +5.82756 +21 +-4.92906 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82756 +20 +-4.92906 +11 +5.82544 +21 +-4.93181 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82544 +20 +-4.93181 +11 +5.80531 +21 +-4.97387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80531 +20 +-4.97387 +11 +5.80456 +21 +-4.977 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80456 +20 +-4.977 +11 +5.80528 +21 +-4.97859 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80528 +20 +-4.97859 +11 +5.80806 +21 +-4.98025 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80806 +20 +-4.98025 +11 +5.81119 +21 +-4.98119 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85387 +20 +-4.97781 +11 +5.85709 +21 +-4.97739 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85709 +20 +-4.97739 +11 +5.85875 +21 +-4.97612 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85875 +20 +-4.97612 +11 +5.85934 +21 +-4.97447 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85934 +20 +-4.97447 +11 +5.85944 +21 +-4.97231 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85944 +20 +-4.97231 +11 +5.85944 +21 +-4.9375 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85944 +20 +-4.9375 +11 +5.85912 +21 +-4.93419 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85912 +20 +-4.93419 +11 +5.85825 +21 +-4.93284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85825 +20 +-4.93284 +11 +5.85663 +21 +-4.93213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85663 +20 +-4.93213 +11 +5.85366 +21 +-4.93181 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85366 +20 +-4.93181 +11 +5.85013 +21 +-4.93344 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85013 +20 +-4.93344 +11 +5.84994 +21 +-4.93356 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84994 +20 +-4.93356 +11 +5.83969 +21 +-4.94281 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83969 +20 +-4.94281 +11 +5.83744 +21 +-4.9465 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83744 +20 +-4.9465 +11 +5.83941 +21 +-4.95038 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83941 +20 +-4.95038 +11 +5.84319 +21 +-4.95256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84319 +20 +-4.95256 +11 +5.84756 +21 +-4.95062 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84756 +20 +-4.95062 +11 +5.84837 +21 +-4.94987 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84837 +20 +-4.94987 +11 +5.84837 +21 +-4.97219 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84837 +20 +-4.97219 +11 +5.84847 +21 +-4.97447 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84847 +20 +-4.97447 +11 +5.84906 +21 +-4.97619 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84906 +20 +-4.97619 +11 +5.85073 +21 +-4.97741 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85073 +20 +-4.97741 +11 +5.85387 +21 +-4.97781 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18756 +20 +-4.99168 +11 +6.18235 +21 +-4.99168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18235 +20 +-4.99168 +11 +6.17876 +21 +-4.9915 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17876 +20 +-4.9915 +11 +6.1752 +21 +-4.99097 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1752 +20 +-4.99097 +11 +6.17171 +21 +-4.9901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17171 +20 +-4.9901 +11 +6.16832 +21 +-4.98889 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16832 +20 +-4.98889 +11 +6.16506 +21 +-4.98735 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16506 +20 +-4.98735 +11 +6.16198 +21 +-4.9855 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16198 +20 +-4.9855 +11 +6.15909 +21 +-4.98335 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15909 +20 +-4.98335 +11 +6.15642 +21 +-4.98093 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15642 +20 +-4.98093 +11 +6.154 +21 +-4.97827 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.154 +20 +-4.97827 +11 +6.15186 +21 +-4.97538 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15186 +20 +-4.97538 +11 +6.15001 +21 +-4.97229 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15001 +20 +-4.97229 +11 +6.14847 +21 +-4.96904 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14847 +20 +-4.96904 +11 +6.14726 +21 +-4.96565 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14726 +20 +-4.96565 +11 +6.14638 +21 +-4.96216 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14638 +20 +-4.96216 +11 +6.14585 +21 +-4.95859 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14585 +20 +-4.95859 +11 +6.14568 +21 +-4.955 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14568 +20 +-4.955 +11 +6.14585 +21 +-4.95141 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14585 +20 +-4.95141 +11 +6.14638 +21 +-4.94784 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14638 +20 +-4.94784 +11 +6.14726 +21 +-4.94435 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14726 +20 +-4.94435 +11 +6.14847 +21 +-4.94096 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14847 +20 +-4.94096 +11 +6.15001 +21 +-4.93771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15001 +20 +-4.93771 +11 +6.15186 +21 +-4.93462 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15186 +20 +-4.93462 +11 +6.154 +21 +-4.93173 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.154 +20 +-4.93173 +11 +6.15642 +21 +-4.92907 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15642 +20 +-4.92907 +11 +6.15909 +21 +-4.92665 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15909 +20 +-4.92665 +11 +6.16198 +21 +-4.9245 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16198 +20 +-4.9245 +11 +6.16506 +21 +-4.92265 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16506 +20 +-4.92265 +11 +6.16832 +21 +-4.92111 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16832 +20 +-4.92111 +11 +6.17171 +21 +-4.9199 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17171 +20 +-4.9199 +11 +6.1752 +21 +-4.91903 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1752 +20 +-4.91903 +11 +6.17876 +21 +-4.9185 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17876 +20 +-4.9185 +11 +6.18235 +21 +-4.91832 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18235 +20 +-4.91832 +11 +6.18756 +21 +-4.91832 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18756 +20 +-4.91832 +11 +6.22244 +21 +-4.91832 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22244 +20 +-4.91832 +11 +6.22765 +21 +-4.91832 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22765 +20 +-4.91832 +11 +6.23124 +21 +-4.9185 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23124 +20 +-4.9185 +11 +6.2348 +21 +-4.91903 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2348 +20 +-4.91903 +11 +6.23829 +21 +-4.9199 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23829 +20 +-4.9199 +11 +6.24168 +21 +-4.92111 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24168 +20 +-4.92111 +11 +6.24494 +21 +-4.92265 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24494 +20 +-4.92265 +11 +6.24802 +21 +-4.9245 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24802 +20 +-4.9245 +11 +6.25091 +21 +-4.92665 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25091 +20 +-4.92665 +11 +6.25358 +21 +-4.92907 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25358 +20 +-4.92907 +11 +6.256 +21 +-4.93173 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.256 +20 +-4.93173 +11 +6.25814 +21 +-4.93462 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25814 +20 +-4.93462 +11 +6.25999 +21 +-4.93771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25999 +20 +-4.93771 +11 +6.26153 +21 +-4.94096 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26153 +20 +-4.94096 +11 +6.26274 +21 +-4.94435 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26274 +20 +-4.94435 +11 +6.26362 +21 +-4.94784 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26362 +20 +-4.94784 +11 +6.26415 +21 +-4.95141 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26415 +20 +-4.95141 +11 +6.26432 +21 +-4.955 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26432 +20 +-4.955 +11 +6.26415 +21 +-4.95859 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26415 +20 +-4.95859 +11 +6.26362 +21 +-4.96216 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26362 +20 +-4.96216 +11 +6.26274 +21 +-4.96565 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26274 +20 +-4.96565 +11 +6.26153 +21 +-4.96904 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26153 +20 +-4.96904 +11 +6.25999 +21 +-4.97229 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25999 +20 +-4.97229 +11 +6.25814 +21 +-4.97538 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25814 +20 +-4.97538 +11 +6.256 +21 +-4.97827 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.256 +20 +-4.97827 +11 +6.25358 +21 +-4.98093 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25358 +20 +-4.98093 +11 +6.25091 +21 +-4.98335 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25091 +20 +-4.98335 +11 +6.24802 +21 +-4.9855 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24802 +20 +-4.9855 +11 +6.24494 +21 +-4.98735 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24494 +20 +-4.98735 +11 +6.24168 +21 +-4.98889 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24168 +20 +-4.98889 +11 +6.23829 +21 +-4.9901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23829 +20 +-4.9901 +11 +6.2348 +21 +-4.99097 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2348 +20 +-4.99097 +11 +6.23124 +21 +-4.9915 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23124 +20 +-4.9915 +11 +6.22765 +21 +-4.99168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22765 +20 +-4.99168 +11 +6.22244 +21 +-4.99168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22244 +20 +-4.99168 +11 +6.20487 +21 +-4.99168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20487 +20 +-4.99168 +11 +6.18756 +21 +-4.99168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20487 +20 +-4.97866 +11 +6.20963 +21 +-4.97817 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20963 +20 +-4.97817 +11 +6.21382 +21 +-4.97673 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21382 +20 +-4.97673 +11 +6.21744 +21 +-4.97431 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21744 +20 +-4.97431 +11 +6.22022 +21 +-4.97116 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22022 +20 +-4.97116 +11 +6.22188 +21 +-4.96748 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22188 +20 +-4.96748 +11 +6.22244 +21 +-4.96328 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22244 +20 +-4.96328 +11 +6.22192 +21 +-4.96009 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22192 +20 +-4.96009 +11 +6.22037 +21 +-4.95728 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22037 +20 +-4.95728 +11 +6.21841 +21 +-4.95525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21841 +20 +-4.95525 +11 +6.21656 +21 +-4.95391 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21656 +20 +-4.95391 +11 +6.21656 +21 +-4.95347 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21656 +20 +-4.95347 +11 +6.21927 +21 +-4.95151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21927 +20 +-4.95151 +11 +6.2209 +21 +-4.94887 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2209 +20 +-4.94887 +11 +6.22144 +21 +-4.94556 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22144 +20 +-4.94556 +11 +6.22094 +21 +-4.94204 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22094 +20 +-4.94204 +11 +6.21947 +21 +-4.93876 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21947 +20 +-4.93876 +11 +6.217 +21 +-4.93572 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.217 +20 +-4.93572 +11 +6.21368 +21 +-4.93329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21368 +20 +-4.93329 +11 +6.20964 +21 +-4.93183 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20964 +20 +-4.93183 +11 +6.20487 +21 +-4.93134 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20487 +20 +-4.93134 +11 +6.20177 +21 +-4.93156 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20177 +20 +-4.93156 +11 +6.19897 +21 +-4.93222 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19897 +20 +-4.93222 +11 +6.19484 +21 +-4.93416 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19484 +20 +-4.93416 +11 +6.19225 +21 +-4.93663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19225 +20 +-4.93663 +11 +6.19088 +21 +-4.93859 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19088 +20 +-4.93859 +11 +6.18944 +21 +-4.94284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18944 +20 +-4.94284 +11 +6.19022 +21 +-4.94508 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19022 +20 +-4.94508 +11 +6.19256 +21 +-4.94703 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19256 +20 +-4.94703 +11 +6.196 +21 +-4.94816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.196 +20 +-4.94816 +11 +6.19837 +21 +-4.94738 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19837 +20 +-4.94738 +11 +6.20012 +21 +-4.94503 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20012 +20 +-4.94503 +11 +6.2005 +21 +-4.94428 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2005 +20 +-4.94428 +11 +6.20212 +21 +-4.94278 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20212 +20 +-4.94278 +11 +6.20566 +21 +-4.94203 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20566 +20 +-4.94203 +11 +6.20913 +21 +-4.94322 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20913 +20 +-4.94322 +11 +6.21037 +21 +-4.94572 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21037 +20 +-4.94572 +11 +6.20919 +21 +-4.94755 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20919 +20 +-4.94755 +11 +6.20562 +21 +-4.94816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20562 +20 +-4.94816 +11 +6.20237 +21 +-4.94847 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20237 +20 +-4.94847 +11 +6.20064 +21 +-4.95017 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20064 +20 +-4.95017 +11 +6.20006 +21 +-4.95366 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20006 +20 +-4.95366 +11 +6.20048 +21 +-4.95686 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20048 +20 +-4.95686 +11 +6.20175 +21 +-4.95847 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20175 +20 +-4.95847 +11 +6.20337 +21 +-4.95909 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20337 +20 +-4.95909 +11 +6.20622 +21 +-4.95922 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20622 +20 +-4.95922 +11 +6.20984 +21 +-4.9605 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20984 +20 +-4.9605 +11 +6.21137 +21 +-4.96347 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21137 +20 +-4.96347 +11 +6.20981 +21 +-4.9665 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20981 +20 +-4.9665 +11 +6.20781 +21 +-4.96751 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20781 +20 +-4.96751 +11 +6.20494 +21 +-4.96784 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20494 +20 +-4.96784 +11 +6.20231 +21 +-4.96747 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20231 +20 +-4.96747 +11 +6.19888 +21 +-4.96447 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19888 +20 +-4.96447 +11 +6.197 +21 +-4.96122 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.197 +20 +-4.96122 +11 +6.19369 +21 +-4.96059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19369 +20 +-4.96059 +11 +6.18909 +21 +-4.9615 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18909 +20 +-4.9615 +11 +6.18756 +21 +-4.96422 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18756 +20 +-4.96422 +11 +6.18825 +21 +-4.96759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18825 +20 +-4.96759 +11 +6.18837 +21 +-4.96822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18837 +20 +-4.96822 +11 +6.18906 +21 +-4.96984 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18906 +20 +-4.96984 +11 +6.19061 +21 +-4.97233 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19061 +20 +-4.97233 +11 +6.19238 +21 +-4.97428 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19238 +20 +-4.97428 +11 +6.19599 +21 +-4.97671 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19599 +20 +-4.97671 +11 +6.20015 +21 +-4.97817 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20015 +20 +-4.97817 +11 +6.20487 +21 +-4.97866 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99222 +20 +-4.99133 +11 +5.98701 +21 +-4.99133 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98701 +20 +-4.99133 +11 +5.98345 +21 +-4.99116 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98345 +20 +-4.99116 +11 +5.97992 +21 +-4.99064 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97992 +20 +-4.99064 +11 +5.97646 +21 +-4.98977 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97646 +20 +-4.98977 +11 +5.97311 +21 +-4.98857 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97311 +20 +-4.98857 +11 +5.96988 +21 +-4.98704 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96988 +20 +-4.98704 +11 +5.96682 +21 +-4.98521 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96682 +20 +-4.98521 +11 +5.96396 +21 +-4.98309 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96396 +20 +-4.98309 +11 +5.96132 +21 +-4.98069 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96132 +20 +-4.98069 +11 +5.95892 +21 +-4.97805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95892 +20 +-4.97805 +11 +5.9568 +21 +-4.97519 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9568 +20 +-4.97519 +11 +5.95497 +21 +-4.97213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95497 +20 +-4.97213 +11 +5.95344 +21 +-4.9689 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95344 +20 +-4.9689 +11 +5.95224 +21 +-4.96555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95224 +20 +-4.96555 +11 +5.95138 +21 +-4.96209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95138 +20 +-4.96209 +11 +5.95085 +21 +-4.95856 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95085 +20 +-4.95856 +11 +5.95068 +21 +-4.955 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95068 +20 +-4.955 +11 +5.95085 +21 +-4.95144 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95085 +20 +-4.95144 +11 +5.95138 +21 +-4.94791 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95138 +20 +-4.94791 +11 +5.95224 +21 +-4.94445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95224 +20 +-4.94445 +11 +5.95344 +21 +-4.9411 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95344 +20 +-4.9411 +11 +5.95497 +21 +-4.93787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95497 +20 +-4.93787 +11 +5.9568 +21 +-4.93481 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9568 +20 +-4.93481 +11 +5.95892 +21 +-4.93195 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95892 +20 +-4.93195 +11 +5.96132 +21 +-4.92931 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96132 +20 +-4.92931 +11 +5.96396 +21 +-4.92691 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96396 +20 +-4.92691 +11 +5.96682 +21 +-4.92479 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96682 +20 +-4.92479 +11 +5.96988 +21 +-4.92296 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96988 +20 +-4.92296 +11 +5.97311 +21 +-4.92143 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97311 +20 +-4.92143 +11 +5.97646 +21 +-4.92023 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97646 +20 +-4.92023 +11 +5.97992 +21 +-4.91936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97992 +20 +-4.91936 +11 +5.98345 +21 +-4.91884 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98345 +20 +-4.91884 +11 +5.98701 +21 +-4.91867 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98701 +20 +-4.91867 +11 +5.99222 +21 +-4.91867 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99222 +20 +-4.91867 +11 +6.02778 +21 +-4.91867 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02778 +20 +-4.91867 +11 +6.03299 +21 +-4.91867 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03299 +20 +-4.91867 +11 +6.03655 +21 +-4.91884 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03655 +20 +-4.91884 +11 +6.04008 +21 +-4.91936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04008 +20 +-4.91936 +11 +6.04354 +21 +-4.92023 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04354 +20 +-4.92023 +11 +6.04689 +21 +-4.92143 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04689 +20 +-4.92143 +11 +6.05012 +21 +-4.92296 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05012 +20 +-4.92296 +11 +6.05318 +21 +-4.92479 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05318 +20 +-4.92479 +11 +6.05604 +21 +-4.92691 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05604 +20 +-4.92691 +11 +6.05868 +21 +-4.92931 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05868 +20 +-4.92931 +11 +6.06108 +21 +-4.93195 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06108 +20 +-4.93195 +11 +6.0632 +21 +-4.93481 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0632 +20 +-4.93481 +11 +6.06503 +21 +-4.93787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06503 +20 +-4.93787 +11 +6.06656 +21 +-4.9411 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06656 +20 +-4.9411 +11 +6.06776 +21 +-4.94445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06776 +20 +-4.94445 +11 +6.06862 +21 +-4.94791 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06862 +20 +-4.94791 +11 +6.06915 +21 +-4.95144 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06915 +20 +-4.95144 +11 +6.06932 +21 +-4.955 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06932 +20 +-4.955 +11 +6.06915 +21 +-4.95856 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06915 +20 +-4.95856 +11 +6.06862 +21 +-4.96209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06862 +20 +-4.96209 +11 +6.06776 +21 +-4.96555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06776 +20 +-4.96555 +11 +6.06656 +21 +-4.9689 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06656 +20 +-4.9689 +11 +6.06503 +21 +-4.97213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06503 +20 +-4.97213 +11 +6.0632 +21 +-4.97519 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0632 +20 +-4.97519 +11 +6.06108 +21 +-4.97805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06108 +20 +-4.97805 +11 +6.05868 +21 +-4.98069 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05868 +20 +-4.98069 +11 +6.05604 +21 +-4.98309 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05604 +20 +-4.98309 +11 +6.05318 +21 +-4.98521 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05318 +20 +-4.98521 +11 +6.05012 +21 +-4.98704 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05012 +20 +-4.98704 +11 +6.04689 +21 +-4.98857 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04689 +20 +-4.98857 +11 +6.04354 +21 +-4.98977 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04354 +20 +-4.98977 +11 +6.04008 +21 +-4.99064 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04008 +20 +-4.99064 +11 +6.03655 +21 +-4.99116 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03655 +20 +-4.99116 +11 +6.03299 +21 +-4.99133 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03299 +20 +-4.99133 +11 +6.02778 +21 +-4.99133 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02778 +20 +-4.99133 +11 +6.02216 +21 +-4.99133 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02216 +20 +-4.99133 +11 +5.99222 +21 +-4.99133 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02216 +20 +-4.97831 +11 +6.02603 +21 +-4.97756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02603 +20 +-4.97756 +11 +6.02738 +21 +-4.97594 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02738 +20 +-4.97594 +11 +6.02778 +21 +-4.97278 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02778 +20 +-4.97278 +11 +6.02741 +21 +-4.96959 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02741 +20 +-4.96959 +11 +6.02594 +21 +-4.96778 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02594 +20 +-4.96778 +11 +6.02228 +21 +-4.96719 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02228 +20 +-4.96719 +11 +6.01084 +21 +-4.96719 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01084 +20 +-4.96719 +11 +6.01084 +21 +-4.96687 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01084 +20 +-4.96687 +11 +6.01241 +21 +-4.96625 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01241 +20 +-4.96625 +11 +6.01628 +21 +-4.96414 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01628 +20 +-4.96414 +11 +6.02066 +21 +-4.96069 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02066 +20 +-4.96069 +11 +6.02269 +21 +-4.95844 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02269 +20 +-4.95844 +11 +6.02441 +21 +-4.95556 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02441 +20 +-4.95556 +11 +6.02558 +21 +-4.95228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02558 +20 +-4.95228 +11 +6.02597 +21 +-4.94881 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02597 +20 +-4.94881 +11 +6.02545 +21 +-4.94452 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02545 +20 +-4.94452 +11 +6.02389 +21 +-4.94055 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02389 +20 +-4.94055 +11 +6.02128 +21 +-4.93691 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02128 +20 +-4.93691 +11 +6.01784 +21 +-4.93401 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01784 +20 +-4.93401 +11 +6.01377 +21 +-4.93227 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01377 +20 +-4.93227 +11 +6.00906 +21 +-4.93169 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00906 +20 +-4.93169 +11 +6.00436 +21 +-4.93226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00436 +20 +-4.93226 +11 +6.0003 +21 +-4.93398 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0003 +20 +-4.93398 +11 +5.99688 +21 +-4.93684 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99688 +20 +-4.93684 +11 +5.99429 +21 +-4.94043 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99429 +20 +-4.94043 +11 +5.99274 +21 +-4.94432 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99274 +20 +-4.94432 +11 +5.99222 +21 +-4.9485 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99222 +20 +-4.9485 +11 +5.99253 +21 +-4.95169 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99253 +20 +-4.95169 +11 +5.99423 +21 +-4.95347 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99423 +20 +-4.95347 +11 +5.99772 +21 +-4.95406 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99772 +20 +-4.95406 +11 +6.00091 +21 +-4.95369 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00091 +20 +-4.95369 +11 +6.00259 +21 +-4.95256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00259 +20 +-4.95256 +11 +6.00319 +21 +-4.951 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00319 +20 +-4.951 +11 +6.00328 +21 +-4.94894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00328 +20 +-4.94894 +11 +6.00328 +21 +-4.94856 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00328 +20 +-4.94856 +11 +6.00353 +21 +-4.94712 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00353 +20 +-4.94712 +11 +6.00519 +21 +-4.94422 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00519 +20 +-4.94422 +11 +6.00866 +21 +-4.94275 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00866 +20 +-4.94275 +11 +6.01178 +21 +-4.94331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01178 +20 +-4.94331 +11 +6.01344 +21 +-4.94453 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01344 +20 +-4.94453 +11 +6.01441 +21 +-4.94622 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01441 +20 +-4.94622 +11 +6.01484 +21 +-4.94781 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01484 +20 +-4.94781 +11 +6.01426 +21 +-4.95055 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01426 +20 +-4.95055 +11 +6.0125 +21 +-4.95312 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0125 +20 +-4.95312 +11 +6.00991 +21 +-4.95549 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00991 +20 +-4.95549 +11 +6.00684 +21 +-4.95759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00684 +20 +-4.95759 +11 +6.00353 +21 +-4.95958 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00353 +20 +-4.95958 +11 +6.00022 +21 +-4.96159 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00022 +20 +-4.96159 +11 +5.99715 +21 +-4.96383 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99715 +20 +-4.96383 +11 +5.99456 +21 +-4.96647 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99456 +20 +-4.96647 +11 +5.9928 +21 +-4.96945 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9928 +20 +-4.96945 +11 +5.99222 +21 +-4.97269 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99222 +20 +-4.97269 +11 +5.99384 +21 +-4.97663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99384 +20 +-4.97663 +11 +5.99772 +21 +-4.97831 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99772 +20 +-4.97831 +11 +6.02216 +21 +-4.97831 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24907 +20 +-4.81464 +11 +6.25075 +21 +-4.81533 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25075 +20 +-4.81533 +11 +6.25144 +21 +-4.817 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25144 +20 +-4.817 +11 +6.25144 +21 +-4.904 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25144 +20 +-4.904 +11 +6.25075 +21 +-4.90567 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25075 +20 +-4.90567 +11 +6.24907 +21 +-4.90636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24907 +20 +-4.90636 +11 +5.76907 +21 +-4.90636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76907 +20 +-4.90636 +11 +5.7674 +21 +-4.90567 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7674 +20 +-4.90567 +11 +5.76671 +21 +-4.904 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76671 +20 +-4.904 +11 +5.76671 +21 +-4.817 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76671 +20 +-4.817 +11 +5.7674 +21 +-4.81533 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7674 +20 +-4.81533 +11 +5.76907 +21 +-4.81464 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76907 +20 +-4.81464 +11 +6.24907 +21 +-4.81464 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77144 +20 +-4.81936 +11 +5.77144 +21 +-4.90164 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77144 +20 +-4.90164 +11 +6.24671 +21 +-4.90164 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24671 +20 +-4.90164 +11 +6.24671 +21 +-4.81936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24671 +20 +-4.81936 +11 +5.77144 +21 +-4.81936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40468 +20 +-4.76727 +11 +6.40538 +21 +-4.76894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40538 +20 +-4.76894 +11 +6.40468 +21 +-4.77061 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40468 +20 +-4.77061 +11 +6.40301 +21 +-4.7713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40301 +20 +-4.7713 +11 +6.38514 +21 +-4.7713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38514 +20 +-4.7713 +11 +6.38346 +21 +-4.77061 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38346 +20 +-4.77061 +11 +6.38277 +21 +-4.76894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38277 +20 +-4.76894 +11 +6.38346 +21 +-4.76727 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38346 +20 +-4.76727 +11 +6.38514 +21 +-4.76657 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38514 +20 +-4.76657 +11 +6.40301 +21 +-4.76657 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40301 +20 +-4.76657 +11 +6.40468 +21 +-4.76727 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51922 +20 +-4.71562 +11 +6.52056 +21 +-4.71713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52056 +20 +-4.71713 +11 +6.52061 +21 +-4.71915 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52061 +20 +-4.71915 +11 +6.51253 +21 +-4.74339 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51253 +20 +-4.74339 +11 +6.52423 +21 +-4.74339 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52423 +20 +-4.74339 +11 +6.52423 +21 +-4.73322 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52423 +20 +-4.73322 +11 +6.52441 +21 +-4.73221 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52441 +20 +-4.73221 +11 +6.52571 +21 +-4.73066 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52571 +20 +-4.73066 +11 +6.5277 +21 +-4.73031 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5277 +20 +-4.73031 +11 +6.52945 +21 +-4.73132 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52945 +20 +-4.73132 +11 +6.53014 +21 +-4.73322 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53014 +20 +-4.73322 +11 +6.53014 +21 +-4.74339 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53014 +20 +-4.74339 +11 +6.53281 +21 +-4.74339 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53281 +20 +-4.74339 +11 +6.53382 +21 +-4.74357 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53382 +20 +-4.74357 +11 +6.53537 +21 +-4.74486 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53537 +20 +-4.74486 +11 +6.53572 +21 +-4.74685 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53572 +20 +-4.74685 +11 +6.53471 +21 +-4.7486 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53471 +20 +-4.7486 +11 +6.53281 +21 +-4.74929 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53281 +20 +-4.74929 +11 +6.53014 +21 +-4.74929 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53014 +20 +-4.74929 +11 +6.53014 +21 +-4.75946 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53014 +20 +-4.75946 +11 +6.52996 +21 +-4.76047 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52996 +20 +-4.76047 +11 +6.52866 +21 +-4.76202 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52866 +20 +-4.76202 +11 +6.52667 +21 +-4.76237 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52667 +20 +-4.76237 +11 +6.52492 +21 +-4.76136 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52492 +20 +-4.76136 +11 +6.52423 +21 +-4.75946 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52423 +20 +-4.75946 +11 +6.52423 +21 +-4.74929 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52423 +20 +-4.74929 +11 +6.50844 +21 +-4.74929 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50844 +20 +-4.74929 +11 +6.50743 +21 +-4.74912 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50743 +20 +-4.74912 +11 +6.50725 +21 +-4.74897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50725 +20 +-4.74897 +11 +6.50703 +21 +-4.74894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50703 +20 +-4.74894 +11 +6.5065 +21 +-4.74833 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5065 +20 +-4.74833 +11 +6.50588 +21 +-4.74782 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50588 +20 +-4.74782 +11 +6.50584 +21 +-4.74759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50584 +20 +-4.74759 +11 +6.50569 +21 +-4.74743 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50569 +20 +-4.74743 +11 +6.50567 +21 +-4.74662 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50567 +20 +-4.74662 +11 +6.50553 +21 +-4.74583 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50553 +20 +-4.74583 +11 +6.50564 +21 +-4.74563 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50564 +20 +-4.74563 +11 +6.50564 +21 +-4.74541 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50564 +20 +-4.74541 +11 +6.51501 +21 +-4.71729 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51501 +20 +-4.71729 +11 +6.5155 +21 +-4.71638 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5155 +20 +-4.71638 +11 +6.51722 +21 +-4.71533 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51722 +20 +-4.71533 +11 +6.51922 +21 +-4.71562 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48695 +20 +-4.71732 +11 +6.48708 +21 +-4.71743 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48708 +20 +-4.71743 +11 +6.48726 +21 +-4.71745 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48726 +20 +-4.71745 +11 +6.49101 +21 +-4.71933 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49101 +20 +-4.71933 +11 +6.49172 +21 +-4.71985 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49172 +20 +-4.71985 +11 +6.49178 +21 +-4.71988 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49178 +20 +-4.71988 +11 +6.49365 +21 +-4.72176 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49365 +20 +-4.72176 +11 +6.49416 +21 +-4.72248 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49416 +20 +-4.72248 +11 +6.4942 +21 +-4.72252 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4942 +20 +-4.72252 +11 +6.49608 +21 +-4.72627 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49608 +20 +-4.72627 +11 +6.49637 +21 +-4.72726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49637 +20 +-4.72726 +11 +6.49633 +21 +-4.72743 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49633 +20 +-4.72743 +11 +6.49639 +21 +-4.72759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49639 +20 +-4.72759 +11 +6.49639 +21 +-4.73322 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49639 +20 +-4.73322 +11 +6.49621 +21 +-4.73423 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49621 +20 +-4.73423 +11 +6.4961 +21 +-4.73436 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4961 +20 +-4.73436 +11 +6.49608 +21 +-4.73454 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49608 +20 +-4.73454 +11 +6.4942 +21 +-4.73829 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4942 +20 +-4.73829 +11 +6.49368 +21 +-4.739 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49368 +20 +-4.739 +11 +6.49365 +21 +-4.73905 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49365 +20 +-4.73905 +11 +6.49178 +21 +-4.74093 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49178 +20 +-4.74093 +11 +6.49105 +21 +-4.74144 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49105 +20 +-4.74144 +11 +6.49101 +21 +-4.74148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49101 +20 +-4.74148 +11 +6.48726 +21 +-4.74336 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48726 +20 +-4.74336 +11 +6.48628 +21 +-4.74365 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48628 +20 +-4.74365 +11 +6.48611 +21 +-4.74361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48611 +20 +-4.74361 +11 +6.48598 +21 +-4.74366 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48598 +20 +-4.74366 +11 +6.49586 +21 +-4.75777 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49586 +20 +-4.75777 +11 +6.49629 +21 +-4.7587 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49629 +20 +-4.7587 +11 +6.49611 +21 +-4.76071 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49611 +20 +-4.76071 +11 +6.49469 +21 +-4.76214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49469 +20 +-4.76214 +11 +6.49267 +21 +-4.76232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49267 +20 +-4.76232 +11 +6.49102 +21 +-4.76116 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49102 +20 +-4.76116 +11 +6.47878 +21 +-4.74367 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47878 +20 +-4.74367 +11 +6.47389 +21 +-4.74367 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47389 +20 +-4.74367 +11 +6.47389 +21 +-4.75946 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47389 +20 +-4.75946 +11 +6.47372 +21 +-4.76047 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47372 +20 +-4.76047 +11 +6.47242 +21 +-4.76202 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47242 +20 +-4.76202 +11 +6.47043 +21 +-4.76237 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47043 +20 +-4.76237 +11 +6.46868 +21 +-4.76136 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46868 +20 +-4.76136 +11 +6.46799 +21 +-4.75946 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46799 +20 +-4.75946 +11 +6.46799 +21 +-4.72009 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46799 +20 +-4.72009 +11 +6.46806 +21 +-4.71971 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46806 +20 +-4.71971 +11 +6.46803 +21 +-4.71958 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46803 +20 +-4.71958 +11 +6.4681 +21 +-4.71947 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4681 +20 +-4.71947 +11 +6.46817 +21 +-4.71908 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46817 +20 +-4.71908 +11 +6.46866 +21 +-4.7185 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46866 +20 +-4.7185 +11 +6.46904 +21 +-4.71783 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46904 +20 +-4.71783 +11 +6.46929 +21 +-4.71774 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46929 +20 +-4.71774 +11 +6.46946 +21 +-4.71754 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46946 +20 +-4.71754 +11 +6.47022 +21 +-4.7174 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47022 +20 +-4.7174 +11 +6.47094 +21 +-4.71714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47094 +20 +-4.71714 +11 +6.48594 +21 +-4.71714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48594 +20 +-4.71714 +11 +6.48695 +21 +-4.71732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47389 +20 +-4.73776 +11 +6.48524 +21 +-4.73776 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48524 +20 +-4.73776 +11 +6.48794 +21 +-4.73641 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48794 +20 +-4.73641 +11 +6.48914 +21 +-4.73522 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48914 +20 +-4.73522 +11 +6.49049 +21 +-4.73252 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49049 +20 +-4.73252 +11 +6.49049 +21 +-4.72829 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49049 +20 +-4.72829 +11 +6.48914 +21 +-4.72559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48914 +20 +-4.72559 +11 +6.48794 +21 +-4.7244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48794 +20 +-4.7244 +11 +6.48524 +21 +-4.72305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48524 +20 +-4.72305 +11 +6.47389 +21 +-4.72305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47389 +20 +-4.72305 +11 +6.47389 +21 +-4.73776 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31003 +20 +-4.71222 +11 +6.3102 +21 +-4.71219 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3102 +20 +-4.71219 +11 +6.31094 +21 +-4.71261 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31094 +20 +-4.71261 +11 +6.31172 +21 +-4.71296 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31172 +20 +-4.71296 +11 +6.3118 +21 +-4.71311 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3118 +20 +-4.71311 +11 +6.31195 +21 +-4.7132 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31195 +20 +-4.7132 +11 +6.31224 +21 +-4.714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31224 +20 +-4.714 +11 +6.31262 +21 +-4.71477 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31262 +20 +-4.71477 +11 +6.31258 +21 +-4.71493 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31258 +20 +-4.71493 +11 +6.31264 +21 +-4.71509 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31264 +20 +-4.71509 +11 +6.31264 +21 +-4.75151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31264 +20 +-4.75151 +11 +6.32093 +21 +-4.75151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32093 +20 +-4.75151 +11 +6.32194 +21 +-4.75169 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32194 +20 +-4.75169 +11 +6.32349 +21 +-4.75299 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32349 +20 +-4.75299 +11 +6.32384 +21 +-4.75498 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32384 +20 +-4.75498 +11 +6.32283 +21 +-4.75673 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32283 +20 +-4.75673 +11 +6.32093 +21 +-4.75742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32093 +20 +-4.75742 +11 +6.29844 +21 +-4.75742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29844 +20 +-4.75742 +11 +6.29743 +21 +-4.75724 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29743 +20 +-4.75724 +11 +6.29588 +21 +-4.75594 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29588 +20 +-4.75594 +11 +6.29553 +21 +-4.75395 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29553 +20 +-4.75395 +11 +6.29654 +21 +-4.7522 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29654 +20 +-4.7522 +11 +6.29844 +21 +-4.75151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29844 +20 +-4.75151 +11 +6.30673 +21 +-4.75151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30673 +20 +-4.75151 +11 +6.30673 +21 +-4.7241 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30673 +20 +-4.7241 +11 +6.30427 +21 +-4.72656 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30427 +20 +-4.72656 +11 +6.30355 +21 +-4.72706 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30355 +20 +-4.72706 +11 +6.30351 +21 +-4.72711 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30351 +20 +-4.72711 +11 +6.29976 +21 +-4.72898 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29976 +20 +-4.72898 +11 +6.29877 +21 +-4.72928 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29877 +20 +-4.72928 +11 +6.29681 +21 +-4.72881 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29681 +20 +-4.72881 +11 +6.29561 +21 +-4.72718 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29561 +20 +-4.72718 +11 +6.29573 +21 +-4.72517 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29573 +20 +-4.72517 +11 +6.29712 +21 +-4.7237 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29712 +20 +-4.7237 +11 +6.30044 +21 +-4.72204 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30044 +20 +-4.72204 +11 +6.30364 +21 +-4.71884 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30364 +20 +-4.71884 +11 +6.30723 +21 +-4.71346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30723 +20 +-4.71346 +11 +6.30794 +21 +-4.71271 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30794 +20 +-4.71271 +11 +6.3081 +21 +-4.71267 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3081 +20 +-4.71267 +11 +6.30821 +21 +-4.71254 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30821 +20 +-4.71254 +11 +6.30905 +21 +-4.71239 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30905 +20 +-4.71239 +11 +6.30988 +21 +-4.71215 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30988 +20 +-4.71215 +11 +6.31003 +21 +-4.71222 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10444 +20 +-4.71232 +11 +6.10458 +21 +-4.71243 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10458 +20 +-4.71243 +11 +6.10476 +21 +-4.71245 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10476 +20 +-4.71245 +11 +6.1085 +21 +-4.71433 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1085 +20 +-4.71433 +11 +6.10921 +21 +-4.71485 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10921 +20 +-4.71485 +11 +6.10927 +21 +-4.71488 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10927 +20 +-4.71488 +11 +6.11115 +21 +-4.71676 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11115 +20 +-4.71676 +11 +6.11165 +21 +-4.71748 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11165 +20 +-4.71748 +11 +6.1117 +21 +-4.71752 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1117 +20 +-4.71752 +11 +6.11357 +21 +-4.72127 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11357 +20 +-4.72127 +11 +6.11387 +21 +-4.72226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11387 +20 +-4.72226 +11 +6.11383 +21 +-4.72243 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11383 +20 +-4.72243 +11 +6.11389 +21 +-4.72259 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11389 +20 +-4.72259 +11 +6.11389 +21 +-4.72634 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11389 +20 +-4.72634 +11 +6.11373 +21 +-4.72721 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11373 +20 +-4.72721 +11 +6.11373 +21 +-4.72728 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11373 +20 +-4.72728 +11 +6.11186 +21 +-4.7329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11186 +20 +-4.7329 +11 +6.11137 +21 +-4.7338 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11137 +20 +-4.7338 +11 +6.11122 +21 +-4.73389 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11122 +20 +-4.73389 +11 +6.11115 +21 +-4.73405 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11115 +20 +-4.73405 +11 +6.09369 +21 +-4.75151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09369 +20 +-4.75151 +11 +6.11093 +21 +-4.75151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11093 +20 +-4.75151 +11 +6.11194 +21 +-4.75169 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11194 +20 +-4.75169 +11 +6.11349 +21 +-4.75299 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11349 +20 +-4.75299 +11 +6.11384 +21 +-4.75498 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11384 +20 +-4.75498 +11 +6.11283 +21 +-4.75673 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11283 +20 +-4.75673 +11 +6.11093 +21 +-4.75742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11093 +20 +-4.75742 +11 +6.08656 +21 +-4.75742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08656 +20 +-4.75742 +11 +6.08593 +21 +-4.7573 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08593 +20 +-4.7573 +11 +6.0858 +21 +-4.75732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0858 +20 +-4.75732 +11 +6.08573 +21 +-4.75727 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08573 +20 +-4.75727 +11 +6.08555 +21 +-4.75724 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08555 +20 +-4.75724 +11 +6.08487 +21 +-4.75667 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08487 +20 +-4.75667 +11 +6.08414 +21 +-4.75616 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08414 +20 +-4.75616 +11 +6.08411 +21 +-4.75603 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08411 +20 +-4.75603 +11 +6.084 +21 +-4.75594 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.084 +20 +-4.75594 +11 +6.08385 +21 +-4.75506 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08385 +20 +-4.75506 +11 +6.08362 +21 +-4.75421 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08362 +20 +-4.75421 +11 +6.08368 +21 +-4.75408 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08368 +20 +-4.75408 +11 +6.08365 +21 +-4.75395 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08365 +20 +-4.75395 +11 +6.0841 +21 +-4.75318 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0841 +20 +-4.75318 +11 +6.08447 +21 +-4.75238 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08447 +20 +-4.75238 +11 +6.10648 +21 +-4.73037 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10648 +20 +-4.73037 +11 +6.10798 +21 +-4.72586 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10798 +20 +-4.72586 +11 +6.10798 +21 +-4.72329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10798 +20 +-4.72329 +11 +6.10663 +21 +-4.72059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10663 +20 +-4.72059 +11 +6.10543 +21 +-4.7194 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10543 +20 +-4.7194 +11 +6.10274 +21 +-4.71805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10274 +20 +-4.71805 +11 +6.09476 +21 +-4.71805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09476 +20 +-4.71805 +11 +6.09206 +21 +-4.7194 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09206 +20 +-4.7194 +11 +6.09052 +21 +-4.72093 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09052 +20 +-4.72093 +11 +6.08968 +21 +-4.72152 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08968 +20 +-4.72152 +11 +6.08767 +21 +-4.7217 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08767 +20 +-4.7217 +11 +6.08602 +21 +-4.72054 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08602 +20 +-4.72054 +11 +6.08549 +21 +-4.71859 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08549 +20 +-4.71859 +11 +6.08635 +21 +-4.71676 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08635 +20 +-4.71676 +11 +6.08822 +21 +-4.71488 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08822 +20 +-4.71488 +11 +6.08895 +21 +-4.71437 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08895 +20 +-4.71437 +11 +6.08899 +21 +-4.71433 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08899 +20 +-4.71433 +11 +6.09274 +21 +-4.71245 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09274 +20 +-4.71245 +11 +6.09372 +21 +-4.71216 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09372 +20 +-4.71216 +11 +6.09389 +21 +-4.7122 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09389 +20 +-4.7122 +11 +6.09406 +21 +-4.71214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09406 +20 +-4.71214 +11 +6.10343 +21 +-4.71214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10343 +20 +-4.71214 +11 +6.10444 +21 +-4.71232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27695 +20 +-4.71232 +11 +6.27708 +21 +-4.71243 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27708 +20 +-4.71243 +11 +6.27726 +21 +-4.71245 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27726 +20 +-4.71245 +11 +6.28101 +21 +-4.71433 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28101 +20 +-4.71433 +11 +6.28172 +21 +-4.71485 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28172 +20 +-4.71485 +11 +6.28178 +21 +-4.71488 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28178 +20 +-4.71488 +11 +6.28365 +21 +-4.71676 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28365 +20 +-4.71676 +11 +6.28416 +21 +-4.71748 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28416 +20 +-4.71748 +11 +6.2842 +21 +-4.71752 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2842 +20 +-4.71752 +11 +6.28608 +21 +-4.72127 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28608 +20 +-4.72127 +11 +6.28637 +21 +-4.72226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28637 +20 +-4.72226 +11 +6.28633 +21 +-4.72243 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28633 +20 +-4.72243 +11 +6.28639 +21 +-4.72259 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28639 +20 +-4.72259 +11 +6.28639 +21 +-4.72822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28639 +20 +-4.72822 +11 +6.28621 +21 +-4.72923 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28621 +20 +-4.72923 +11 +6.2861 +21 +-4.72936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2861 +20 +-4.72936 +11 +6.28608 +21 +-4.72954 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28608 +20 +-4.72954 +11 +6.2842 +21 +-4.73329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2842 +20 +-4.73329 +11 +6.28368 +21 +-4.734 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28368 +20 +-4.734 +11 +6.28365 +21 +-4.73405 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28365 +20 +-4.73405 +11 +6.28178 +21 +-4.73593 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28178 +20 +-4.73593 +11 +6.28105 +21 +-4.73644 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28105 +20 +-4.73644 +11 +6.28101 +21 +-4.73648 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28101 +20 +-4.73648 +11 +6.27726 +21 +-4.73836 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27726 +20 +-4.73836 +11 +6.27628 +21 +-4.73865 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27628 +20 +-4.73865 +11 +6.27611 +21 +-4.73861 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27611 +20 +-4.73861 +11 +6.27598 +21 +-4.73866 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27598 +20 +-4.73866 +11 +6.28586 +21 +-4.75277 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28586 +20 +-4.75277 +11 +6.28629 +21 +-4.7537 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28629 +20 +-4.7537 +11 +6.28611 +21 +-4.75571 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28611 +20 +-4.75571 +11 +6.28469 +21 +-4.75714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28469 +20 +-4.75714 +11 +6.28267 +21 +-4.75732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28267 +20 +-4.75732 +11 +6.28102 +21 +-4.75616 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28102 +20 +-4.75616 +11 +6.26878 +21 +-4.73867 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26878 +20 +-4.73867 +11 +6.26389 +21 +-4.73867 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26389 +20 +-4.73867 +11 +6.26389 +21 +-4.75446 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26389 +20 +-4.75446 +11 +6.26372 +21 +-4.75547 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26372 +20 +-4.75547 +11 +6.26242 +21 +-4.75702 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26242 +20 +-4.75702 +11 +6.26043 +21 +-4.75737 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26043 +20 +-4.75737 +11 +6.25868 +21 +-4.75636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25868 +20 +-4.75636 +11 +6.25799 +21 +-4.75446 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25799 +20 +-4.75446 +11 +6.25799 +21 +-4.71509 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25799 +20 +-4.71509 +11 +6.25806 +21 +-4.71471 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25806 +20 +-4.71471 +11 +6.25803 +21 +-4.71458 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25803 +20 +-4.71458 +11 +6.2581 +21 +-4.71447 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2581 +20 +-4.71447 +11 +6.25817 +21 +-4.71408 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25817 +20 +-4.71408 +11 +6.25866 +21 +-4.7135 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25866 +20 +-4.7135 +11 +6.25904 +21 +-4.71283 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25904 +20 +-4.71283 +11 +6.25929 +21 +-4.71274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25929 +20 +-4.71274 +11 +6.25946 +21 +-4.71254 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25946 +20 +-4.71254 +11 +6.26022 +21 +-4.7124 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26022 +20 +-4.7124 +11 +6.26094 +21 +-4.71214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26094 +20 +-4.71214 +11 +6.27594 +21 +-4.71214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27594 +20 +-4.71214 +11 +6.27695 +21 +-4.71232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26389 +20 +-4.73276 +11 +6.27524 +21 +-4.73276 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27524 +20 +-4.73276 +11 +6.27794 +21 +-4.73141 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27794 +20 +-4.73141 +11 +6.27914 +21 +-4.73022 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27914 +20 +-4.73022 +11 +6.28049 +21 +-4.72752 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28049 +20 +-4.72752 +11 +6.28049 +21 +-4.72329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28049 +20 +-4.72329 +11 +6.27914 +21 +-4.72059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27914 +20 +-4.72059 +11 +6.27794 +21 +-4.7194 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27794 +20 +-4.7194 +11 +6.27524 +21 +-4.71805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27524 +20 +-4.71805 +11 +6.26389 +21 +-4.71805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26389 +20 +-4.71805 +11 +6.26389 +21 +-4.73276 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06695 +20 +-4.71232 +11 +6.06708 +21 +-4.71243 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06708 +20 +-4.71243 +11 +6.06726 +21 +-4.71245 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06726 +20 +-4.71245 +11 +6.07101 +21 +-4.71433 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07101 +20 +-4.71433 +11 +6.07172 +21 +-4.71485 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07172 +20 +-4.71485 +11 +6.07178 +21 +-4.71488 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07178 +20 +-4.71488 +11 +6.07365 +21 +-4.71676 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07365 +20 +-4.71676 +11 +6.07416 +21 +-4.71748 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07416 +20 +-4.71748 +11 +6.0742 +21 +-4.71752 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0742 +20 +-4.71752 +11 +6.07608 +21 +-4.72127 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07608 +20 +-4.72127 +11 +6.07637 +21 +-4.72226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07637 +20 +-4.72226 +11 +6.07633 +21 +-4.72243 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07633 +20 +-4.72243 +11 +6.07639 +21 +-4.72259 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07639 +20 +-4.72259 +11 +6.07639 +21 +-4.72822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07639 +20 +-4.72822 +11 +6.07621 +21 +-4.72923 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07621 +20 +-4.72923 +11 +6.0761 +21 +-4.72936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0761 +20 +-4.72936 +11 +6.07608 +21 +-4.72954 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07608 +20 +-4.72954 +11 +6.0742 +21 +-4.73329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0742 +20 +-4.73329 +11 +6.07368 +21 +-4.734 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07368 +20 +-4.734 +11 +6.07365 +21 +-4.73405 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07365 +20 +-4.73405 +11 +6.07178 +21 +-4.73593 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07178 +20 +-4.73593 +11 +6.07105 +21 +-4.73644 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07105 +20 +-4.73644 +11 +6.07101 +21 +-4.73648 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07101 +20 +-4.73648 +11 +6.06726 +21 +-4.73836 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06726 +20 +-4.73836 +11 +6.06628 +21 +-4.73865 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06628 +20 +-4.73865 +11 +6.06611 +21 +-4.73861 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06611 +20 +-4.73861 +11 +6.06598 +21 +-4.73866 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06598 +20 +-4.73866 +11 +6.07586 +21 +-4.75277 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07586 +20 +-4.75277 +11 +6.07629 +21 +-4.7537 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07629 +20 +-4.7537 +11 +6.07611 +21 +-4.75571 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07611 +20 +-4.75571 +11 +6.07469 +21 +-4.75714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07469 +20 +-4.75714 +11 +6.07267 +21 +-4.75732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07267 +20 +-4.75732 +11 +6.07102 +21 +-4.75616 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07102 +20 +-4.75616 +11 +6.05878 +21 +-4.73867 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05878 +20 +-4.73867 +11 +6.05389 +21 +-4.73867 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05389 +20 +-4.73867 +11 +6.05389 +21 +-4.75446 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05389 +20 +-4.75446 +11 +6.05372 +21 +-4.75547 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05372 +20 +-4.75547 +11 +6.05242 +21 +-4.75702 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05242 +20 +-4.75702 +11 +6.05043 +21 +-4.75737 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05043 +20 +-4.75737 +11 +6.04868 +21 +-4.75636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04868 +20 +-4.75636 +11 +6.04799 +21 +-4.75446 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04799 +20 +-4.75446 +11 +6.04799 +21 +-4.71509 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04799 +20 +-4.71509 +11 +6.04806 +21 +-4.71471 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04806 +20 +-4.71471 +11 +6.04803 +21 +-4.71458 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04803 +20 +-4.71458 +11 +6.0481 +21 +-4.71447 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0481 +20 +-4.71447 +11 +6.04817 +21 +-4.71408 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04817 +20 +-4.71408 +11 +6.04866 +21 +-4.7135 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04866 +20 +-4.7135 +11 +6.04904 +21 +-4.71283 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04904 +20 +-4.71283 +11 +6.04929 +21 +-4.71274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04929 +20 +-4.71274 +11 +6.04946 +21 +-4.71254 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04946 +20 +-4.71254 +11 +6.05022 +21 +-4.7124 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05022 +20 +-4.7124 +11 +6.05094 +21 +-4.71214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05094 +20 +-4.71214 +11 +6.06594 +21 +-4.71214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06594 +20 +-4.71214 +11 +6.06695 +21 +-4.71232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05389 +20 +-4.73276 +11 +6.06524 +21 +-4.73276 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06524 +20 +-4.73276 +11 +6.06794 +21 +-4.73141 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06794 +20 +-4.73141 +11 +6.06914 +21 +-4.73022 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06914 +20 +-4.73022 +11 +6.07049 +21 +-4.72752 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07049 +20 +-4.72752 +11 +6.07049 +21 +-4.72329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07049 +20 +-4.72329 +11 +6.06914 +21 +-4.72059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06914 +20 +-4.72059 +11 +6.06794 +21 +-4.7194 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06794 +20 +-4.7194 +11 +6.06524 +21 +-4.71805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06524 +20 +-4.71805 +11 +6.05389 +21 +-4.71805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05389 +20 +-4.71805 +11 +6.05389 +21 +-4.73276 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24968 +20 +-4.72846 +11 +6.25037 +21 +-4.73014 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25037 +20 +-4.73014 +11 +6.25037 +21 +-4.74801 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25037 +20 +-4.74801 +11 +6.24968 +21 +-4.74968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24968 +20 +-4.74968 +11 +6.24801 +21 +-4.75038 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24801 +20 +-4.75038 +11 +6.24634 +21 +-4.74968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24634 +20 +-4.74968 +11 +6.24565 +21 +-4.74801 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24565 +20 +-4.74801 +11 +6.24565 +21 +-4.73014 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24565 +20 +-4.73014 +11 +6.24634 +21 +-4.72846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24634 +20 +-4.72846 +11 +6.24801 +21 +-4.72777 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24801 +20 +-4.72777 +11 +6.24968 +21 +-4.72846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19181 +20 +-4.72846 +11 +6.1925 +21 +-4.73014 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1925 +20 +-4.73014 +11 +6.1925 +21 +-4.74801 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1925 +20 +-4.74801 +11 +6.19181 +21 +-4.74968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19181 +20 +-4.74968 +11 +6.19014 +21 +-4.75038 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19014 +20 +-4.75038 +11 +6.18847 +21 +-4.74968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18847 +20 +-4.74968 +11 +6.18778 +21 +-4.74801 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18778 +20 +-4.74801 +11 +6.18778 +21 +-4.73014 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18778 +20 +-4.73014 +11 +6.18847 +21 +-4.72846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18847 +20 +-4.72846 +11 +6.19014 +21 +-4.72777 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19014 +20 +-4.72777 +11 +6.19181 +21 +-4.72846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03968 +20 +-4.72846 +11 +6.04037 +21 +-4.73014 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04037 +20 +-4.73014 +11 +6.04037 +21 +-4.74801 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04037 +20 +-4.74801 +11 +6.03968 +21 +-4.74968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03968 +20 +-4.74968 +11 +6.03801 +21 +-4.75038 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03801 +20 +-4.75038 +11 +6.03634 +21 +-4.74968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03634 +20 +-4.74968 +11 +6.03565 +21 +-4.74801 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03565 +20 +-4.74801 +11 +6.03565 +21 +-4.73014 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03565 +20 +-4.73014 +11 +6.03634 +21 +-4.72846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03634 +20 +-4.72846 +11 +6.03801 +21 +-4.72777 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03801 +20 +-4.72777 +11 +6.03968 +21 +-4.72846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98181 +20 +-4.72846 +11 +5.9825 +21 +-4.73014 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9825 +20 +-4.73014 +11 +5.9825 +21 +-4.74801 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9825 +20 +-4.74801 +11 +5.98181 +21 +-4.74968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98181 +20 +-4.74968 +11 +5.98014 +21 +-4.75038 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98014 +20 +-4.75038 +11 +5.97847 +21 +-4.74968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97847 +20 +-4.74968 +11 +5.97778 +21 +-4.74801 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97778 +20 +-4.74801 +11 +5.97778 +21 +-4.73014 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97778 +20 +-4.73014 +11 +5.97847 +21 +-4.72846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97847 +20 +-4.72846 +11 +5.98014 +21 +-4.72777 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98014 +20 +-4.72777 +11 +5.98181 +21 +-4.72846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70785 +20 +-4.69443 +11 +5.70854 +21 +-4.6961 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70854 +20 +-4.6961 +11 +5.70854 +21 +-4.71343 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70854 +20 +-4.71343 +11 +5.72587 +21 +-4.71343 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72587 +20 +-4.71343 +11 +5.72754 +21 +-4.71412 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72754 +20 +-4.71412 +11 +5.72823 +21 +-4.71579 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72823 +20 +-4.71579 +11 +5.72754 +21 +-4.71746 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72754 +20 +-4.71746 +11 +5.72587 +21 +-4.71815 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72587 +20 +-4.71815 +11 +5.70854 +21 +-4.71815 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70854 +20 +-4.71815 +11 +5.70854 +21 +-4.73547 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70854 +20 +-4.73547 +11 +5.70785 +21 +-4.73714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70785 +20 +-4.73714 +11 +5.70618 +21 +-4.73783 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70618 +20 +-4.73783 +11 +5.70451 +21 +-4.73714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70451 +20 +-4.73714 +11 +5.70382 +21 +-4.73547 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70382 +20 +-4.73547 +11 +5.70382 +21 +-4.71815 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70382 +20 +-4.71815 +11 +5.6865 +21 +-4.71815 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6865 +20 +-4.71815 +11 +5.68483 +21 +-4.71746 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68483 +20 +-4.71746 +11 +5.68413 +21 +-4.71579 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68413 +20 +-4.71579 +11 +5.68483 +21 +-4.71412 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68483 +20 +-4.71412 +11 +5.6865 +21 +-4.71343 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6865 +20 +-4.71343 +11 +5.70382 +21 +-4.71343 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70382 +20 +-4.71343 +11 +5.70382 +21 +-4.6961 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70382 +20 +-4.6961 +11 +5.70451 +21 +-4.69443 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70451 +20 +-4.69443 +11 +5.70618 +21 +-4.69374 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70618 +20 +-4.69374 +11 +5.70785 +21 +-4.69443 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40468 +20 +-4.70939 +11 +6.40538 +21 +-4.71106 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40538 +20 +-4.71106 +11 +6.40468 +21 +-4.71273 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40468 +20 +-4.71273 +11 +6.40301 +21 +-4.71343 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40301 +20 +-4.71343 +11 +6.38514 +21 +-4.71343 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38514 +20 +-4.71343 +11 +6.38346 +21 +-4.71273 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38346 +20 +-4.71273 +11 +6.38277 +21 +-4.71106 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38277 +20 +-4.71106 +11 +6.38346 +21 +-4.70939 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38346 +20 +-4.70939 +11 +6.38514 +21 +-4.7087 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38514 +20 +-4.7087 +11 +6.40301 +21 +-4.7087 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40301 +20 +-4.7087 +11 +6.40468 +21 +-4.70939 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97665 +20 +-4.34098 +11 +5.97832 +21 +-4.34168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97832 +20 +-4.34168 +11 +5.97902 +21 +-4.34335 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97902 +20 +-4.34335 +11 +5.97902 +21 +-4.64475 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97902 +20 +-4.64475 +11 +5.97859 +21 +-4.64578 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97859 +20 +-4.64578 +11 +5.97832 +21 +-4.64642 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97832 +20 +-4.64642 +11 +5.93642 +21 +-4.68832 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93642 +20 +-4.68832 +11 +5.93642 +21 +-4.68832 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93642 +20 +-4.68832 +11 +5.93475 +21 +-4.68902 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93475 +20 +-4.68902 +11 +5.86445 +21 +-4.68902 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86445 +20 +-4.68902 +11 +5.86278 +21 +-4.68832 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86278 +20 +-4.68832 +11 +5.86209 +21 +-4.68665 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86209 +20 +-4.68665 +11 +5.86278 +21 +-4.68498 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86278 +20 +-4.68498 +11 +5.86445 +21 +-4.68429 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86445 +20 +-4.68429 +11 +5.93377 +21 +-4.68429 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93377 +20 +-4.68429 +11 +5.97429 +21 +-4.64377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97429 +20 +-4.64377 +11 +5.97429 +21 +-4.34571 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97429 +20 +-4.34571 +11 +5.86445 +21 +-4.34571 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86445 +20 +-4.34571 +11 +5.86278 +21 +-4.34502 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86278 +20 +-4.34502 +11 +5.86209 +21 +-4.34335 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86209 +20 +-4.34335 +11 +5.86278 +21 +-4.34168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86278 +20 +-4.34168 +11 +5.86445 +21 +-4.34098 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86445 +20 +-4.34098 +11 +5.97665 +21 +-4.34098 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74722 +20 +-4.34168 +11 +5.74791 +21 +-4.34335 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74791 +20 +-4.34335 +11 +5.74722 +21 +-4.34502 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74722 +20 +-4.34502 +11 +5.74555 +21 +-4.34571 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74555 +20 +-4.34571 +11 +5.63571 +21 +-4.34571 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63571 +20 +-4.34571 +11 +5.63571 +21 +-4.64377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63571 +20 +-4.64377 +11 +5.67623 +21 +-4.68429 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67623 +20 +-4.68429 +11 +5.74555 +21 +-4.68429 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74555 +20 +-4.68429 +11 +5.74722 +21 +-4.68498 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74722 +20 +-4.68498 +11 +5.74791 +21 +-4.68665 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74791 +20 +-4.68665 +11 +5.74722 +21 +-4.68832 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74722 +20 +-4.68832 +11 +5.74555 +21 +-4.68902 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74555 +20 +-4.68902 +11 +5.67525 +21 +-4.68902 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67525 +20 +-4.68902 +11 +5.67407 +21 +-4.68853 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67407 +20 +-4.68853 +11 +5.67358 +21 +-4.68832 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67358 +20 +-4.68832 +11 +5.63168 +21 +-4.64642 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63168 +20 +-4.64642 +11 +5.63141 +21 +-4.64578 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63141 +20 +-4.64578 +11 +5.63098 +21 +-4.64475 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63098 +20 +-4.64475 +11 +5.63098 +21 +-4.34335 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63098 +20 +-4.34335 +11 +5.63168 +21 +-4.34168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63168 +20 +-4.34168 +11 +5.63335 +21 +-4.34098 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63335 +20 +-4.34098 +11 +5.74555 +21 +-4.34098 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74555 +20 +-4.34098 +11 +5.74722 +21 +-4.34168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40468 +20 +-4.67727 +11 +6.40538 +21 +-4.67894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40538 +20 +-4.67894 +11 +6.40468 +21 +-4.68061 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40468 +20 +-4.68061 +11 +6.40301 +21 +-4.6813 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40301 +20 +-4.6813 +11 +6.38514 +21 +-4.6813 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38514 +20 +-4.6813 +11 +6.38346 +21 +-4.68061 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38346 +20 +-4.68061 +11 +6.38277 +21 +-4.67894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38277 +20 +-4.67894 +11 +6.38346 +21 +-4.67727 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38346 +20 +-4.67727 +11 +6.38514 +21 +-4.67657 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38514 +20 +-4.67657 +11 +6.40301 +21 +-4.67657 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40301 +20 +-4.67657 +11 +6.40468 +21 +-4.67727 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53137 +20 +-4.62722 +11 +6.53151 +21 +-4.6272 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53151 +20 +-4.6272 +11 +6.53161 +21 +-4.62726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53161 +20 +-4.62726 +11 +6.53194 +21 +-4.62732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53194 +20 +-4.62732 +11 +6.53255 +21 +-4.62783 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53255 +20 +-4.62783 +11 +6.53323 +21 +-4.62824 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53323 +20 +-4.62824 +11 +6.53331 +21 +-4.62847 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53331 +20 +-4.62847 +11 +6.53349 +21 +-4.62862 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53349 +20 +-4.62862 +11 +6.53363 +21 +-4.6294 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53363 +20 +-4.6294 +11 +6.53389 +21 +-4.63015 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53389 +20 +-4.63015 +11 +6.5338 +21 +-4.63037 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5338 +20 +-4.63037 +11 +6.53384 +21 +-4.63061 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53384 +20 +-4.63061 +11 +6.53344 +21 +-4.6313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53344 +20 +-4.6313 +11 +6.53316 +21 +-4.63204 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53316 +20 +-4.63204 +11 +6.5242 +21 +-4.64227 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5242 +20 +-4.64227 +11 +6.52444 +21 +-4.64232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52444 +20 +-4.64232 +11 +6.52458 +21 +-4.64243 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52458 +20 +-4.64243 +11 +6.52476 +21 +-4.64245 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52476 +20 +-4.64245 +11 +6.5285 +21 +-4.64433 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5285 +20 +-4.64433 +11 +6.52921 +21 +-4.64485 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52921 +20 +-4.64485 +11 +6.52927 +21 +-4.64488 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52927 +20 +-4.64488 +11 +6.53115 +21 +-4.64675 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53115 +20 +-4.64675 +11 +6.53165 +21 +-4.64748 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53165 +20 +-4.64748 +11 +6.5317 +21 +-4.64752 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5317 +20 +-4.64752 +11 +6.53357 +21 +-4.65127 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53357 +20 +-4.65127 +11 +6.53387 +21 +-4.65225 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53387 +20 +-4.65225 +11 +6.53383 +21 +-4.65243 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53383 +20 +-4.65243 +11 +6.53389 +21 +-4.65259 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53389 +20 +-4.65259 +11 +6.53389 +21 +-4.66196 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53389 +20 +-4.66196 +11 +6.53371 +21 +-4.66297 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53371 +20 +-4.66297 +11 +6.53359 +21 +-4.66311 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53359 +20 +-4.66311 +11 +6.53357 +21 +-4.66329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53357 +20 +-4.66329 +11 +6.5317 +21 +-4.66703 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5317 +20 +-4.66703 +11 +6.53117 +21 +-4.66774 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53117 +20 +-4.66774 +11 +6.53115 +21 +-4.6678 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53115 +20 +-4.6678 +11 +6.52927 +21 +-4.66968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52927 +20 +-4.66968 +11 +6.52855 +21 +-4.67018 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52855 +20 +-4.67018 +11 +6.5285 +21 +-4.67023 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5285 +20 +-4.67023 +11 +6.52476 +21 +-4.6721 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52476 +20 +-4.6721 +11 +6.52377 +21 +-4.6724 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52377 +20 +-4.6724 +11 +6.5236 +21 +-4.67236 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5236 +20 +-4.67236 +11 +6.52343 +21 +-4.67242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52343 +20 +-4.67242 +11 +6.51219 +21 +-4.67242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51219 +20 +-4.67242 +11 +6.51118 +21 +-4.67224 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51118 +20 +-4.67224 +11 +6.51104 +21 +-4.67212 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51104 +20 +-4.67212 +11 +6.51087 +21 +-4.6721 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51087 +20 +-4.6721 +11 +6.50712 +21 +-4.67023 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50712 +20 +-4.67023 +11 +6.50641 +21 +-4.6697 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50641 +20 +-4.6697 +11 +6.50635 +21 +-4.66968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50635 +20 +-4.66968 +11 +6.50447 +21 +-4.6678 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50447 +20 +-4.6678 +11 +6.50389 +21 +-4.66696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50389 +20 +-4.66696 +11 +6.50371 +21 +-4.66495 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50371 +20 +-4.66495 +11 +6.50487 +21 +-4.6633 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50487 +20 +-4.6633 +11 +6.50682 +21 +-4.66277 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50682 +20 +-4.66277 +11 +6.50865 +21 +-4.66363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50865 +20 +-4.66363 +11 +6.51019 +21 +-4.66516 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51019 +20 +-4.66516 +11 +6.51288 +21 +-4.66651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51288 +20 +-4.66651 +11 +6.52274 +21 +-4.66651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52274 +20 +-4.66651 +11 +6.52543 +21 +-4.66516 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52543 +20 +-4.66516 +11 +6.52663 +21 +-4.66397 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52663 +20 +-4.66397 +11 +6.52798 +21 +-4.66127 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52798 +20 +-4.66127 +11 +6.52798 +21 +-4.65329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52798 +20 +-4.65329 +11 +6.52663 +21 +-4.65059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52663 +20 +-4.65059 +11 +6.52543 +21 +-4.64939 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52543 +20 +-4.64939 +11 +6.52274 +21 +-4.64804 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52274 +20 +-4.64804 +11 +6.51781 +21 +-4.64804 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51781 +20 +-4.64804 +11 +6.51737 +21 +-4.64797 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51737 +20 +-4.64797 +11 +6.51724 +21 +-4.64799 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51724 +20 +-4.64799 +11 +6.51713 +21 +-4.64793 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51713 +20 +-4.64793 +11 +6.5168 +21 +-4.64787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5168 +20 +-4.64787 +11 +6.51619 +21 +-4.64735 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51619 +20 +-4.64735 +11 +6.51551 +21 +-4.64694 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51551 +20 +-4.64694 +11 +6.51543 +21 +-4.64672 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51543 +20 +-4.64672 +11 +6.51525 +21 +-4.64657 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51525 +20 +-4.64657 +11 +6.51511 +21 +-4.64578 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51511 +20 +-4.64578 +11 +6.51486 +21 +-4.64503 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51486 +20 +-4.64503 +11 +6.51494 +21 +-4.64481 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51494 +20 +-4.64481 +11 +6.5149 +21 +-4.64458 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5149 +20 +-4.64458 +11 +6.5153 +21 +-4.64389 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5153 +20 +-4.64389 +11 +6.51559 +21 +-4.64315 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51559 +20 +-4.64315 +11 +6.52443 +21 +-4.63305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52443 +20 +-4.63305 +11 +6.50656 +21 +-4.63305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50656 +20 +-4.63305 +11 +6.50555 +21 +-4.63287 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50555 +20 +-4.63287 +11 +6.504 +21 +-4.63157 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.504 +20 +-4.63157 +11 +6.50365 +21 +-4.62958 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50365 +20 +-4.62958 +11 +6.50466 +21 +-4.62783 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50466 +20 +-4.62783 +11 +6.50656 +21 +-4.62714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50656 +20 +-4.62714 +11 +6.53093 +21 +-4.62714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53093 +20 +-4.62714 +11 +6.53137 +21 +-4.62722 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48695 +20 +-4.62732 +11 +6.48708 +21 +-4.62743 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48708 +20 +-4.62743 +11 +6.48726 +21 +-4.62745 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48726 +20 +-4.62745 +11 +6.49101 +21 +-4.62933 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49101 +20 +-4.62933 +11 +6.49172 +21 +-4.62985 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49172 +20 +-4.62985 +11 +6.49178 +21 +-4.62988 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49178 +20 +-4.62988 +11 +6.49365 +21 +-4.63176 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49365 +20 +-4.63176 +11 +6.49416 +21 +-4.63248 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49416 +20 +-4.63248 +11 +6.4942 +21 +-4.63252 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4942 +20 +-4.63252 +11 +6.49608 +21 +-4.63627 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49608 +20 +-4.63627 +11 +6.49637 +21 +-4.63726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49637 +20 +-4.63726 +11 +6.49633 +21 +-4.63743 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49633 +20 +-4.63743 +11 +6.49639 +21 +-4.63759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49639 +20 +-4.63759 +11 +6.49639 +21 +-4.64322 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49639 +20 +-4.64322 +11 +6.49621 +21 +-4.64423 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49621 +20 +-4.64423 +11 +6.4961 +21 +-4.64436 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4961 +20 +-4.64436 +11 +6.49608 +21 +-4.64454 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49608 +20 +-4.64454 +11 +6.4942 +21 +-4.64829 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4942 +20 +-4.64829 +11 +6.49368 +21 +-4.649 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49368 +20 +-4.649 +11 +6.49365 +21 +-4.64905 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49365 +20 +-4.64905 +11 +6.49178 +21 +-4.65093 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49178 +20 +-4.65093 +11 +6.49105 +21 +-4.65144 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49105 +20 +-4.65144 +11 +6.49101 +21 +-4.65148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49101 +20 +-4.65148 +11 +6.48726 +21 +-4.65336 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48726 +20 +-4.65336 +11 +6.48628 +21 +-4.65365 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48628 +20 +-4.65365 +11 +6.48611 +21 +-4.65361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48611 +20 +-4.65361 +11 +6.48598 +21 +-4.65366 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48598 +20 +-4.65366 +11 +6.49586 +21 +-4.66777 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49586 +20 +-4.66777 +11 +6.49629 +21 +-4.6687 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49629 +20 +-4.6687 +11 +6.49611 +21 +-4.67071 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49611 +20 +-4.67071 +11 +6.49469 +21 +-4.67214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49469 +20 +-4.67214 +11 +6.49267 +21 +-4.67232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49267 +20 +-4.67232 +11 +6.49102 +21 +-4.67116 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49102 +20 +-4.67116 +11 +6.47878 +21 +-4.65367 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47878 +20 +-4.65367 +11 +6.47389 +21 +-4.65367 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47389 +20 +-4.65367 +11 +6.47389 +21 +-4.66946 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47389 +20 +-4.66946 +11 +6.47372 +21 +-4.67047 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47372 +20 +-4.67047 +11 +6.47242 +21 +-4.67202 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47242 +20 +-4.67202 +11 +6.47043 +21 +-4.67237 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47043 +20 +-4.67237 +11 +6.46868 +21 +-4.67136 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46868 +20 +-4.67136 +11 +6.46799 +21 +-4.66946 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46799 +20 +-4.66946 +11 +6.46799 +21 +-4.63009 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46799 +20 +-4.63009 +11 +6.46806 +21 +-4.62971 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46806 +20 +-4.62971 +11 +6.46803 +21 +-4.62958 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46803 +20 +-4.62958 +11 +6.4681 +21 +-4.62947 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4681 +20 +-4.62947 +11 +6.46817 +21 +-4.62908 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46817 +20 +-4.62908 +11 +6.46866 +21 +-4.6285 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46866 +20 +-4.6285 +11 +6.46904 +21 +-4.62783 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46904 +20 +-4.62783 +11 +6.46929 +21 +-4.62774 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46929 +20 +-4.62774 +11 +6.46946 +21 +-4.62754 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46946 +20 +-4.62754 +11 +6.47022 +21 +-4.6274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47022 +20 +-4.6274 +11 +6.47094 +21 +-4.62714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47094 +20 +-4.62714 +11 +6.48594 +21 +-4.62714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48594 +20 +-4.62714 +11 +6.48695 +21 +-4.62732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47389 +20 +-4.64776 +11 +6.48524 +21 +-4.64776 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48524 +20 +-4.64776 +11 +6.48794 +21 +-4.64641 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48794 +20 +-4.64641 +11 +6.48914 +21 +-4.64522 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48914 +20 +-4.64522 +11 +6.49049 +21 +-4.64252 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49049 +20 +-4.64252 +11 +6.49049 +21 +-4.63829 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49049 +20 +-4.63829 +11 +6.48914 +21 +-4.63559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48914 +20 +-4.63559 +11 +6.48794 +21 +-4.6344 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48794 +20 +-4.6344 +11 +6.48524 +21 +-4.63305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48524 +20 +-4.63305 +11 +6.47389 +21 +-4.63305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47389 +20 +-4.63305 +11 +6.47389 +21 +-4.64776 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08785 +20 +-4.59943 +11 +6.08854 +21 +-4.6011 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08854 +20 +-4.6011 +11 +6.08854 +21 +-4.61843 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08854 +20 +-4.61843 +11 +6.10587 +21 +-4.61843 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10587 +20 +-4.61843 +11 +6.10754 +21 +-4.61912 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10754 +20 +-4.61912 +11 +6.10823 +21 +-4.62079 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10823 +20 +-4.62079 +11 +6.10754 +21 +-4.62246 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10754 +20 +-4.62246 +11 +6.10587 +21 +-4.62315 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10587 +20 +-4.62315 +11 +6.08854 +21 +-4.62315 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08854 +20 +-4.62315 +11 +6.08854 +21 +-4.64047 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08854 +20 +-4.64047 +11 +6.08785 +21 +-4.64214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08785 +20 +-4.64214 +11 +6.08618 +21 +-4.64283 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08618 +20 +-4.64283 +11 +6.08451 +21 +-4.64214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08451 +20 +-4.64214 +11 +6.08382 +21 +-4.64047 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08382 +20 +-4.64047 +11 +6.08382 +21 +-4.62315 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08382 +20 +-4.62315 +11 +6.0665 +21 +-4.62315 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0665 +20 +-4.62315 +11 +6.06483 +21 +-4.62246 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06483 +20 +-4.62246 +11 +6.06413 +21 +-4.62079 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06413 +20 +-4.62079 +11 +6.06483 +21 +-4.61912 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06483 +20 +-4.61912 +11 +6.0665 +21 +-4.61843 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0665 +20 +-4.61843 +11 +6.08382 +21 +-4.61843 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08382 +20 +-4.61843 +11 +6.08382 +21 +-4.6011 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08382 +20 +-4.6011 +11 +6.08451 +21 +-4.59943 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08451 +20 +-4.59943 +11 +6.08618 +21 +-4.59874 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08618 +20 +-4.59874 +11 +6.08785 +21 +-4.59943 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40468 +20 +-4.61939 +11 +6.40538 +21 +-4.62106 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40538 +20 +-4.62106 +11 +6.40468 +21 +-4.62273 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40468 +20 +-4.62273 +11 +6.40301 +21 +-4.62343 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40301 +20 +-4.62343 +11 +6.38514 +21 +-4.62343 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38514 +20 +-4.62343 +11 +6.38346 +21 +-4.62273 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38346 +20 +-4.62273 +11 +6.38277 +21 +-4.62106 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38277 +20 +-4.62106 +11 +6.38346 +21 +-4.61939 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38346 +20 +-4.61939 +11 +6.38514 +21 +-4.6187 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38514 +20 +-4.6187 +11 +6.40301 +21 +-4.6187 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40301 +20 +-4.6187 +11 +6.40468 +21 +-4.61939 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35665 +20 +-4.24598 +11 +6.35832 +21 +-4.24668 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35832 +20 +-4.24668 +11 +6.35902 +21 +-4.24835 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35902 +20 +-4.24835 +11 +6.35902 +21 +-4.54975 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35902 +20 +-4.54975 +11 +6.35853 +21 +-4.55093 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35853 +20 +-4.55093 +11 +6.35832 +21 +-4.55142 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35832 +20 +-4.55142 +11 +6.31642 +21 +-4.59332 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31642 +20 +-4.59332 +11 +6.31475 +21 +-4.59402 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31475 +20 +-4.59402 +11 +6.24445 +21 +-4.59402 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24445 +20 +-4.59402 +11 +6.24278 +21 +-4.59332 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24278 +20 +-4.59332 +11 +6.24209 +21 +-4.59165 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24209 +20 +-4.59165 +11 +6.24278 +21 +-4.58998 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24278 +20 +-4.58998 +11 +6.24445 +21 +-4.58929 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24445 +20 +-4.58929 +11 +6.31377 +21 +-4.58929 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31377 +20 +-4.58929 +11 +6.35429 +21 +-4.54877 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35429 +20 +-4.54877 +11 +6.35429 +21 +-4.25071 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35429 +20 +-4.25071 +11 +6.24445 +21 +-4.25071 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24445 +20 +-4.25071 +11 +6.24278 +21 +-4.25002 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24278 +20 +-4.25002 +11 +6.24209 +21 +-4.24835 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24209 +20 +-4.24835 +11 +6.24278 +21 +-4.24668 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24278 +20 +-4.24668 +11 +6.24445 +21 +-4.24598 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24445 +20 +-4.24598 +11 +6.35665 +21 +-4.24598 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12722 +20 +-4.24668 +11 +6.12791 +21 +-4.24835 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12791 +20 +-4.24835 +11 +6.12722 +21 +-4.25002 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12722 +20 +-4.25002 +11 +6.12555 +21 +-4.25071 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12555 +20 +-4.25071 +11 +6.01571 +21 +-4.25071 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01571 +20 +-4.25071 +11 +6.01571 +21 +-4.54877 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01571 +20 +-4.54877 +11 +6.05623 +21 +-4.58929 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05623 +20 +-4.58929 +11 +6.12555 +21 +-4.58929 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12555 +20 +-4.58929 +11 +6.12722 +21 +-4.58998 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12722 +20 +-4.58998 +11 +6.12791 +21 +-4.59165 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12791 +20 +-4.59165 +11 +6.12722 +21 +-4.59332 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12722 +20 +-4.59332 +11 +6.12555 +21 +-4.59402 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12555 +20 +-4.59402 +11 +6.05525 +21 +-4.59402 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05525 +20 +-4.59402 +11 +6.05407 +21 +-4.59353 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05407 +20 +-4.59353 +11 +6.05358 +21 +-4.59332 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05358 +20 +-4.59332 +11 +6.01168 +21 +-4.55142 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01168 +20 +-4.55142 +11 +6.01168 +21 +-4.55142 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01168 +20 +-4.55142 +11 +6.01098 +21 +-4.54975 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01098 +20 +-4.54975 +11 +6.01098 +21 +-4.24835 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01098 +20 +-4.24835 +11 +6.01168 +21 +-4.24668 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01168 +20 +-4.24668 +11 +6.01335 +21 +-4.24598 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01335 +20 +-4.24598 +11 +6.12555 +21 +-4.24598 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12555 +20 +-4.24598 +11 +6.12722 +21 +-4.24668 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60944 +20 +-4.48732 +11 +5.60958 +21 +-4.48743 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60958 +20 +-4.48743 +11 +5.60976 +21 +-4.48745 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60976 +20 +-4.48745 +11 +5.6135 +21 +-4.48933 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6135 +20 +-4.48933 +11 +5.61421 +21 +-4.48985 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61421 +20 +-4.48985 +11 +5.61427 +21 +-4.48988 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61427 +20 +-4.48988 +11 +5.61615 +21 +-4.49176 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61615 +20 +-4.49176 +11 +5.61665 +21 +-4.49248 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61665 +20 +-4.49248 +11 +5.6167 +21 +-4.49252 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6167 +20 +-4.49252 +11 +5.61857 +21 +-4.49627 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61857 +20 +-4.49627 +11 +5.61887 +21 +-4.49726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61887 +20 +-4.49726 +11 +5.61883 +21 +-4.49743 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61883 +20 +-4.49743 +11 +5.61889 +21 +-4.49759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61889 +20 +-4.49759 +11 +5.61889 +21 +-4.50134 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61889 +20 +-4.50134 +11 +5.61873 +21 +-4.50221 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61873 +20 +-4.50221 +11 +5.61873 +21 +-4.50228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61873 +20 +-4.50228 +11 +5.61686 +21 +-4.5079 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61686 +20 +-4.5079 +11 +5.61637 +21 +-4.5088 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61637 +20 +-4.5088 +11 +5.61622 +21 +-4.50889 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61622 +20 +-4.50889 +11 +5.61615 +21 +-4.50905 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61615 +20 +-4.50905 +11 +5.59869 +21 +-4.52651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59869 +20 +-4.52651 +11 +5.61593 +21 +-4.52651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61593 +20 +-4.52651 +11 +5.61694 +21 +-4.52669 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61694 +20 +-4.52669 +11 +5.61849 +21 +-4.52799 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61849 +20 +-4.52799 +11 +5.61884 +21 +-4.52998 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61884 +20 +-4.52998 +11 +5.61783 +21 +-4.53173 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61783 +20 +-4.53173 +11 +5.61593 +21 +-4.53242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61593 +20 +-4.53242 +11 +5.59156 +21 +-4.53242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59156 +20 +-4.53242 +11 +5.59093 +21 +-4.5323 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59093 +20 +-4.5323 +11 +5.5908 +21 +-4.53232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5908 +20 +-4.53232 +11 +5.59073 +21 +-4.53227 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59073 +20 +-4.53227 +11 +5.59055 +21 +-4.53224 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59055 +20 +-4.53224 +11 +5.58987 +21 +-4.53167 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.58987 +20 +-4.53167 +11 +5.58914 +21 +-4.53116 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.58914 +20 +-4.53116 +11 +5.58911 +21 +-4.53103 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.58911 +20 +-4.53103 +11 +5.589 +21 +-4.53094 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.589 +20 +-4.53094 +11 +5.58885 +21 +-4.53006 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.58885 +20 +-4.53006 +11 +5.58862 +21 +-4.52921 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.58862 +20 +-4.52921 +11 +5.58868 +21 +-4.52908 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.58868 +20 +-4.52908 +11 +5.58865 +21 +-4.52895 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.58865 +20 +-4.52895 +11 +5.5891 +21 +-4.52818 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5891 +20 +-4.52818 +11 +5.58947 +21 +-4.52738 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.58947 +20 +-4.52738 +11 +5.61148 +21 +-4.50537 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61148 +20 +-4.50537 +11 +5.61298 +21 +-4.50086 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61298 +20 +-4.50086 +11 +5.61298 +21 +-4.49829 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61298 +20 +-4.49829 +11 +5.61163 +21 +-4.49559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61163 +20 +-4.49559 +11 +5.61043 +21 +-4.4944 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61043 +20 +-4.4944 +11 +5.60774 +21 +-4.49305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60774 +20 +-4.49305 +11 +5.59976 +21 +-4.49305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59976 +20 +-4.49305 +11 +5.59706 +21 +-4.4944 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59706 +20 +-4.4944 +11 +5.59552 +21 +-4.49593 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59552 +20 +-4.49593 +11 +5.59468 +21 +-4.49652 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59468 +20 +-4.49652 +11 +5.59267 +21 +-4.4967 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59267 +20 +-4.4967 +11 +5.59102 +21 +-4.49554 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59102 +20 +-4.49554 +11 +5.59049 +21 +-4.49359 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59049 +20 +-4.49359 +11 +5.59135 +21 +-4.49176 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59135 +20 +-4.49176 +11 +5.59322 +21 +-4.48988 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59322 +20 +-4.48988 +11 +5.59395 +21 +-4.48937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59395 +20 +-4.48937 +11 +5.59399 +21 +-4.48933 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59399 +20 +-4.48933 +11 +5.59774 +21 +-4.48745 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59774 +20 +-4.48745 +11 +5.59872 +21 +-4.48716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59872 +20 +-4.48716 +11 +5.59889 +21 +-4.4872 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59889 +20 +-4.4872 +11 +5.59906 +21 +-4.48714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59906 +20 +-4.48714 +11 +5.60843 +21 +-4.48714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60843 +20 +-4.48714 +11 +5.60944 +21 +-4.48732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57181 +20 +-4.48729 +11 +5.57187 +21 +-4.48729 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57187 +20 +-4.48729 +11 +5.5775 +21 +-4.48917 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5775 +20 +-4.48917 +11 +5.5784 +21 +-4.48966 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5784 +20 +-4.48966 +11 +5.57849 +21 +-4.48981 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57849 +20 +-4.48981 +11 +5.57865 +21 +-4.48988 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57865 +20 +-4.48988 +11 +5.58053 +21 +-4.49176 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.58053 +20 +-4.49176 +11 +5.58111 +21 +-4.4926 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.58111 +20 +-4.4926 +11 +5.58129 +21 +-4.49461 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.58129 +20 +-4.49461 +11 +5.58013 +21 +-4.49626 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.58013 +20 +-4.49626 +11 +5.57818 +21 +-4.49678 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57818 +20 +-4.49678 +11 +5.57635 +21 +-4.49593 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57635 +20 +-4.49593 +11 +5.57497 +21 +-4.49455 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57497 +20 +-4.49455 +11 +5.57046 +21 +-4.49305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57046 +20 +-4.49305 +11 +5.56767 +21 +-4.49305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.56767 +20 +-4.49305 +11 +5.56316 +21 +-4.49455 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.56316 +20 +-4.49455 +11 +5.56024 +21 +-4.49747 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.56024 +20 +-4.49747 +11 +5.55873 +21 +-4.5005 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55873 +20 +-4.5005 +11 +5.55702 +21 +-4.50733 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55702 +20 +-4.50733 +11 +5.55702 +21 +-4.51223 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55702 +20 +-4.51223 +11 +5.55873 +21 +-4.51906 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55873 +20 +-4.51906 +11 +5.56024 +21 +-4.52209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.56024 +20 +-4.52209 +11 +5.56316 +21 +-4.52501 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.56316 +20 +-4.52501 +11 +5.56767 +21 +-4.52651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.56767 +20 +-4.52651 +11 +5.57046 +21 +-4.52651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57046 +20 +-4.52651 +11 +5.57497 +21 +-4.52501 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57497 +20 +-4.52501 +11 +5.57635 +21 +-4.52363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57635 +20 +-4.52363 +11 +5.57719 +21 +-4.52304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57719 +20 +-4.52304 +11 +5.5792 +21 +-4.52286 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5792 +20 +-4.52286 +11 +5.58086 +21 +-4.52402 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.58086 +20 +-4.52402 +11 +5.58138 +21 +-4.52597 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.58138 +20 +-4.52597 +11 +5.58053 +21 +-4.5278 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.58053 +20 +-4.5278 +11 +5.57865 +21 +-4.52968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57865 +20 +-4.52968 +11 +5.57781 +21 +-4.53027 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57781 +20 +-4.53027 +11 +5.57764 +21 +-4.53028 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57764 +20 +-4.53028 +11 +5.5775 +21 +-4.53039 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5775 +20 +-4.53039 +11 +5.57187 +21 +-4.53226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57187 +20 +-4.53226 +11 +5.571 +21 +-4.53239 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.571 +20 +-4.53239 +11 +5.57094 +21 +-4.53242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57094 +20 +-4.53242 +11 +5.56719 +21 +-4.53242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.56719 +20 +-4.53242 +11 +5.56632 +21 +-4.53226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.56632 +20 +-4.53226 +11 +5.56626 +21 +-4.53226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.56626 +20 +-4.53226 +11 +5.56063 +21 +-4.53039 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.56063 +20 +-4.53039 +11 +5.55973 +21 +-4.5299 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55973 +20 +-4.5299 +11 +5.55964 +21 +-4.52975 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55964 +20 +-4.52975 +11 +5.55948 +21 +-4.52968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55948 +20 +-4.52968 +11 +5.55573 +21 +-4.52593 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55573 +20 +-4.52593 +11 +5.55522 +21 +-4.5252 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55522 +20 +-4.5252 +11 +5.55517 +21 +-4.52516 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55517 +20 +-4.52516 +11 +5.5533 +21 +-4.52141 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5533 +20 +-4.52141 +11 +5.55315 +21 +-4.52092 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55315 +20 +-4.52092 +11 +5.55308 +21 +-4.52081 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55308 +20 +-4.52081 +11 +5.5512 +21 +-4.51331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5512 +20 +-4.51331 +11 +5.55116 +21 +-4.51272 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55116 +20 +-4.51272 +11 +5.55111 +21 +-4.51259 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55111 +20 +-4.51259 +11 +5.55111 +21 +-4.50697 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55111 +20 +-4.50697 +11 +5.55122 +21 +-4.50639 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55122 +20 +-4.50639 +11 +5.5512 +21 +-4.50625 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5512 +20 +-4.50625 +11 +5.55308 +21 +-4.49875 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55308 +20 +-4.49875 +11 +5.55328 +21 +-4.49829 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55328 +20 +-4.49829 +11 +5.5533 +21 +-4.49815 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5533 +20 +-4.49815 +11 +5.55517 +21 +-4.4944 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55517 +20 +-4.4944 +11 +5.5557 +21 +-4.49369 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5557 +20 +-4.49369 +11 +5.55573 +21 +-4.49363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55573 +20 +-4.49363 +11 +5.55948 +21 +-4.48988 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55948 +20 +-4.48988 +11 +5.56032 +21 +-4.48929 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.56032 +20 +-4.48929 +11 +5.56049 +21 +-4.48928 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.56049 +20 +-4.48928 +11 +5.56063 +21 +-4.48917 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.56063 +20 +-4.48917 +11 +5.56626 +21 +-4.48729 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.56626 +20 +-4.48729 +11 +5.56713 +21 +-4.48716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.56713 +20 +-4.48716 +11 +5.56719 +21 +-4.48714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.56719 +20 +-4.48714 +11 +5.57094 +21 +-4.48714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57094 +20 +-4.48714 +11 +5.57181 +21 +-4.48729 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42096 +20 +-4.38722 +11 +6.42112 +21 +-4.38719 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42112 +20 +-4.38719 +11 +6.42187 +21 +-4.38761 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42187 +20 +-4.38761 +11 +6.42265 +21 +-4.38796 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42265 +20 +-4.38796 +11 +6.42273 +21 +-4.38811 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42273 +20 +-4.38811 +11 +6.42287 +21 +-4.3882 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42287 +20 +-4.3882 +11 +6.42317 +21 +-4.389 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42317 +20 +-4.389 +11 +6.42355 +21 +-4.38977 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42355 +20 +-4.38977 +11 +6.4235 +21 +-4.38993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4235 +20 +-4.38993 +11 +6.42356 +21 +-4.39009 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42356 +20 +-4.39009 +11 +6.42356 +21 +-4.42651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42356 +20 +-4.42651 +11 +6.43186 +21 +-4.42651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43186 +20 +-4.42651 +11 +6.43287 +21 +-4.42669 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43287 +20 +-4.42669 +11 +6.43442 +21 +-4.42799 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43442 +20 +-4.42799 +11 +6.43477 +21 +-4.42998 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43477 +20 +-4.42998 +11 +6.43376 +21 +-4.43173 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43376 +20 +-4.43173 +11 +6.43186 +21 +-4.43242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43186 +20 +-4.43242 +11 +6.40936 +21 +-4.43242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40936 +20 +-4.43242 +11 +6.40835 +21 +-4.43224 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40835 +20 +-4.43224 +11 +6.4068 +21 +-4.43094 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4068 +20 +-4.43094 +11 +6.40645 +21 +-4.42895 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40645 +20 +-4.42895 +11 +6.40746 +21 +-4.4272 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40746 +20 +-4.4272 +11 +6.40936 +21 +-4.42651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40936 +20 +-4.42651 +11 +6.41766 +21 +-4.42651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41766 +20 +-4.42651 +11 +6.41766 +21 +-4.3991 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41766 +20 +-4.3991 +11 +6.4152 +21 +-4.40156 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4152 +20 +-4.40156 +11 +6.41448 +21 +-4.40206 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41448 +20 +-4.40206 +11 +6.41443 +21 +-4.40211 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41443 +20 +-4.40211 +11 +6.41068 +21 +-4.40398 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41068 +20 +-4.40398 +11 +6.4097 +21 +-4.40428 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4097 +20 +-4.40428 +11 +6.40773 +21 +-4.40381 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40773 +20 +-4.40381 +11 +6.40653 +21 +-4.40218 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40653 +20 +-4.40218 +11 +6.40665 +21 +-4.40017 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40665 +20 +-4.40017 +11 +6.40804 +21 +-4.3987 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40804 +20 +-4.3987 +11 +6.41136 +21 +-4.39704 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41136 +20 +-4.39704 +11 +6.41457 +21 +-4.39384 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41457 +20 +-4.39384 +11 +6.41815 +21 +-4.38846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41815 +20 +-4.38846 +11 +6.41886 +21 +-4.38771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41886 +20 +-4.38771 +11 +6.41902 +21 +-4.38767 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41902 +20 +-4.38767 +11 +6.41913 +21 +-4.38754 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41913 +20 +-4.38754 +11 +6.41998 +21 +-4.38739 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41998 +20 +-4.38739 +11 +6.4208 +21 +-4.38715 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4208 +20 +-4.38715 +11 +6.42096 +21 +-4.38722 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38773 +20 +-4.38729 +11 +6.3878 +21 +-4.38729 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3878 +20 +-4.38729 +11 +6.39342 +21 +-4.38917 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39342 +20 +-4.38917 +11 +6.39432 +21 +-4.38966 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39432 +20 +-4.38966 +11 +6.39442 +21 +-4.38981 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39442 +20 +-4.38981 +11 +6.39458 +21 +-4.38988 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39458 +20 +-4.38988 +11 +6.39645 +21 +-4.39176 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39645 +20 +-4.39176 +11 +6.39704 +21 +-4.3926 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39704 +20 +-4.3926 +11 +6.39722 +21 +-4.39461 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39722 +20 +-4.39461 +11 +6.39606 +21 +-4.39626 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39606 +20 +-4.39626 +11 +6.39411 +21 +-4.39678 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39411 +20 +-4.39678 +11 +6.39228 +21 +-4.39593 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39228 +20 +-4.39593 +11 +6.39089 +21 +-4.39455 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39089 +20 +-4.39455 +11 +6.38639 +21 +-4.39305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38639 +20 +-4.39305 +11 +6.38359 +21 +-4.39305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38359 +20 +-4.39305 +11 +6.37909 +21 +-4.39455 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37909 +20 +-4.39455 +11 +6.37617 +21 +-4.39747 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37617 +20 +-4.39747 +11 +6.37465 +21 +-4.4005 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37465 +20 +-4.4005 +11 +6.37294 +21 +-4.40733 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37294 +20 +-4.40733 +11 +6.37294 +21 +-4.41223 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37294 +20 +-4.41223 +11 +6.37465 +21 +-4.41906 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37465 +20 +-4.41906 +11 +6.37617 +21 +-4.42209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37617 +20 +-4.42209 +11 +6.37909 +21 +-4.42501 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37909 +20 +-4.42501 +11 +6.38359 +21 +-4.42651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38359 +20 +-4.42651 +11 +6.38639 +21 +-4.42651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38639 +20 +-4.42651 +11 +6.39089 +21 +-4.42501 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39089 +20 +-4.42501 +11 +6.39228 +21 +-4.42363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39228 +20 +-4.42363 +11 +6.39312 +21 +-4.42304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39312 +20 +-4.42304 +11 +6.39513 +21 +-4.42286 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39513 +20 +-4.42286 +11 +6.39678 +21 +-4.42402 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39678 +20 +-4.42402 +11 +6.39731 +21 +-4.42597 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39731 +20 +-4.42597 +11 +6.39645 +21 +-4.4278 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39645 +20 +-4.4278 +11 +6.39458 +21 +-4.42968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39458 +20 +-4.42968 +11 +6.39374 +21 +-4.43027 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39374 +20 +-4.43027 +11 +6.39356 +21 +-4.43028 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39356 +20 +-4.43028 +11 +6.39342 +21 +-4.43039 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39342 +20 +-4.43039 +11 +6.3878 +21 +-4.43227 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3878 +20 +-4.43227 +11 +6.38692 +21 +-4.43239 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38692 +20 +-4.43239 +11 +6.38686 +21 +-4.43242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38686 +20 +-4.43242 +11 +6.38311 +21 +-4.43242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38311 +20 +-4.43242 +11 +6.38225 +21 +-4.43226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38225 +20 +-4.43226 +11 +6.38218 +21 +-4.43227 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38218 +20 +-4.43227 +11 +6.37656 +21 +-4.43039 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37656 +20 +-4.43039 +11 +6.37566 +21 +-4.4299 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37566 +20 +-4.4299 +11 +6.37556 +21 +-4.42975 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37556 +20 +-4.42975 +11 +6.3754 +21 +-4.42968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3754 +20 +-4.42968 +11 +6.37165 +21 +-4.42593 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37165 +20 +-4.42593 +11 +6.37115 +21 +-4.4252 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37115 +20 +-4.4252 +11 +6.3711 +21 +-4.42516 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3711 +20 +-4.42516 +11 +6.36923 +21 +-4.42141 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36923 +20 +-4.42141 +11 +6.36908 +21 +-4.42092 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36908 +20 +-4.42092 +11 +6.369 +21 +-4.42081 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.369 +20 +-4.42081 +11 +6.36713 +21 +-4.41331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36713 +20 +-4.41331 +11 +6.36709 +21 +-4.41272 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36709 +20 +-4.41272 +11 +6.36704 +21 +-4.41259 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36704 +20 +-4.41259 +11 +6.36704 +21 +-4.40697 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36704 +20 +-4.40697 +11 +6.36714 +21 +-4.40639 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36714 +20 +-4.40639 +11 +6.36713 +21 +-4.40625 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36713 +20 +-4.40625 +11 +6.369 +21 +-4.39875 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.369 +20 +-4.39875 +11 +6.36921 +21 +-4.39829 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36921 +20 +-4.39829 +11 +6.36923 +21 +-4.39815 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36923 +20 +-4.39815 +11 +6.3711 +21 +-4.3944 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3711 +20 +-4.3944 +11 +6.37163 +21 +-4.39369 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37163 +20 +-4.39369 +11 +6.37165 +21 +-4.39363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37165 +20 +-4.39363 +11 +6.3754 +21 +-4.38988 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3754 +20 +-4.38988 +11 +6.37624 +21 +-4.38929 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37624 +20 +-4.38929 +11 +6.37642 +21 +-4.38928 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37642 +20 +-4.38928 +11 +6.37656 +21 +-4.38917 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37656 +20 +-4.38917 +11 +6.38218 +21 +-4.38729 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38218 +20 +-4.38729 +11 +6.38305 +21 +-4.38716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38305 +20 +-4.38716 +11 +6.38311 +21 +-4.38714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38311 +20 +-4.38714 +11 +6.38686 +21 +-4.38714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38686 +20 +-4.38714 +11 +6.38773 +21 +-4.38729 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67007 +20 +-4.13665 +11 +5.67162 +21 +-4.13795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67162 +20 +-4.13795 +11 +5.67197 +21 +-4.13994 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67197 +20 +-4.13994 +11 +5.67096 +21 +-4.14169 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67096 +20 +-4.14169 +11 +5.66906 +21 +-4.14238 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66906 +20 +-4.14238 +11 +5.65298 +21 +-4.14238 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65298 +20 +-4.14238 +11 +5.65201 +21 +-4.15215 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65201 +20 +-4.15215 +11 +5.65274 +21 +-4.15178 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65274 +20 +-4.15178 +11 +5.65372 +21 +-4.15149 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65372 +20 +-4.15149 +11 +5.65389 +21 +-4.15153 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65389 +20 +-4.15153 +11 +5.65406 +21 +-4.15147 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65406 +20 +-4.15147 +11 +5.66343 +21 +-4.15147 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66343 +20 +-4.15147 +11 +5.66444 +21 +-4.15165 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66444 +20 +-4.15165 +11 +5.66458 +21 +-4.15176 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66458 +20 +-4.15176 +11 +5.66476 +21 +-4.15178 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66476 +20 +-4.15178 +11 +5.6685 +21 +-4.15366 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6685 +20 +-4.15366 +11 +5.66921 +21 +-4.15418 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66921 +20 +-4.15418 +11 +5.66927 +21 +-4.15421 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66927 +20 +-4.15421 +11 +5.67115 +21 +-4.15608 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67115 +20 +-4.15608 +11 +5.67165 +21 +-4.15681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67165 +20 +-4.15681 +11 +5.6717 +21 +-4.15685 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6717 +20 +-4.15685 +11 +5.67357 +21 +-4.1606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67357 +20 +-4.1606 +11 +5.67387 +21 +-4.16158 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67387 +20 +-4.16158 +11 +5.67383 +21 +-4.16176 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67383 +20 +-4.16176 +11 +5.67389 +21 +-4.16192 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67389 +20 +-4.16192 +11 +5.67389 +21 +-4.1713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67389 +20 +-4.1713 +11 +5.67371 +21 +-4.17231 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67371 +20 +-4.17231 +11 +5.67359 +21 +-4.17244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67359 +20 +-4.17244 +11 +5.67357 +21 +-4.17262 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67357 +20 +-4.17262 +11 +5.6717 +21 +-4.17637 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6717 +20 +-4.17637 +11 +5.67117 +21 +-4.17707 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67117 +20 +-4.17707 +11 +5.67115 +21 +-4.17713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67115 +20 +-4.17713 +11 +5.66927 +21 +-4.17901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66927 +20 +-4.17901 +11 +5.66855 +21 +-4.17951 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66855 +20 +-4.17951 +11 +5.6685 +21 +-4.17956 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6685 +20 +-4.17956 +11 +5.66476 +21 +-4.18144 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66476 +20 +-4.18144 +11 +5.66377 +21 +-4.18173 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66377 +20 +-4.18173 +11 +5.6636 +21 +-4.18169 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6636 +20 +-4.18169 +11 +5.66343 +21 +-4.18175 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66343 +20 +-4.18175 +11 +5.65406 +21 +-4.18175 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65406 +20 +-4.18175 +11 +5.65305 +21 +-4.18157 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65305 +20 +-4.18157 +11 +5.65292 +21 +-4.18146 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65292 +20 +-4.18146 +11 +5.65274 +21 +-4.18144 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65274 +20 +-4.18144 +11 +5.64899 +21 +-4.17956 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64899 +20 +-4.17956 +11 +5.64828 +21 +-4.17903 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64828 +20 +-4.17903 +11 +5.64822 +21 +-4.17901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64822 +20 +-4.17901 +11 +5.64635 +21 +-4.17713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64635 +20 +-4.17713 +11 +5.64576 +21 +-4.17629 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64576 +20 +-4.17629 +11 +5.64558 +21 +-4.17428 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64558 +20 +-4.17428 +11 +5.64674 +21 +-4.17263 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64674 +20 +-4.17263 +11 +5.64869 +21 +-4.1721 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64869 +20 +-4.1721 +11 +5.65052 +21 +-4.17296 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65052 +20 +-4.17296 +11 +5.65206 +21 +-4.17449 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65206 +20 +-4.17449 +11 +5.65476 +21 +-4.17584 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65476 +20 +-4.17584 +11 +5.66274 +21 +-4.17584 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66274 +20 +-4.17584 +11 +5.66543 +21 +-4.17449 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66543 +20 +-4.17449 +11 +5.66663 +21 +-4.1733 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66663 +20 +-4.1733 +11 +5.66798 +21 +-4.1706 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66798 +20 +-4.1706 +11 +5.66798 +21 +-4.16262 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66798 +20 +-4.16262 +11 +5.66663 +21 +-4.15992 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66663 +20 +-4.15992 +11 +5.66543 +21 +-4.15872 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66543 +20 +-4.15872 +11 +5.66274 +21 +-4.15738 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66274 +20 +-4.15738 +11 +5.65476 +21 +-4.15738 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65476 +20 +-4.15738 +11 +5.65206 +21 +-4.15872 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65206 +20 +-4.15872 +11 +5.65052 +21 +-4.16026 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65052 +20 +-4.16026 +11 +5.64968 +21 +-4.16085 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64968 +20 +-4.16085 +11 +5.64966 +21 +-4.16085 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64966 +20 +-4.16085 +11 +5.64965 +21 +-4.16086 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64965 +20 +-4.16086 +11 +5.64866 +21 +-4.16094 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64866 +20 +-4.16094 +11 +5.64767 +21 +-4.16102 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64767 +20 +-4.16102 +11 +5.64766 +21 +-4.16101 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64766 +20 +-4.16101 +11 +5.64764 +21 +-4.16101 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64764 +20 +-4.16101 +11 +5.64683 +21 +-4.16043 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64683 +20 +-4.16043 +11 +5.64602 +21 +-4.15987 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64602 +20 +-4.15987 +11 +5.64601 +21 +-4.15985 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64601 +20 +-4.15985 +11 +5.646 +21 +-4.15984 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.646 +20 +-4.15984 +11 +5.64575 +21 +-4.15887 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64575 +20 +-4.15887 +11 +5.64549 +21 +-4.15791 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64549 +20 +-4.15791 +11 +5.6455 +21 +-4.1579 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6455 +20 +-4.1579 +11 +5.6455 +21 +-4.15788 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6455 +20 +-4.15788 +11 +5.64737 +21 +-4.13913 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64737 +20 +-4.13913 +11 +5.64742 +21 +-4.13898 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64742 +20 +-4.13898 +11 +5.6474 +21 +-4.13891 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6474 +20 +-4.13891 +11 +5.64746 +21 +-4.13881 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64746 +20 +-4.13881 +11 +5.64765 +21 +-4.13814 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64765 +20 +-4.13814 +11 +5.6481 +21 +-4.13771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6481 +20 +-4.13771 +11 +5.64841 +21 +-4.13716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64841 +20 +-4.13716 +11 +5.6488 +21 +-4.13702 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6488 +20 +-4.13702 +11 +5.6491 +21 +-4.13673 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6491 +20 +-4.13673 +11 +5.64972 +21 +-4.13669 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64972 +20 +-4.13669 +11 +5.65031 +21 +-4.13647 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65031 +20 +-4.13647 +11 +5.66906 +21 +-4.13647 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66906 +20 +-4.13647 +11 +5.67007 +21 +-4.13665 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62681 +20 +-4.13662 +11 +5.62687 +21 +-4.13662 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62687 +20 +-4.13662 +11 +5.6325 +21 +-4.1385 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6325 +20 +-4.1385 +11 +5.6334 +21 +-4.13899 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6334 +20 +-4.13899 +11 +5.63349 +21 +-4.13914 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63349 +20 +-4.13914 +11 +5.63365 +21 +-4.13921 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63365 +20 +-4.13921 +11 +5.63553 +21 +-4.14109 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63553 +20 +-4.14109 +11 +5.63611 +21 +-4.14193 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63611 +20 +-4.14193 +11 +5.63629 +21 +-4.14394 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63629 +20 +-4.14394 +11 +5.63513 +21 +-4.14559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63513 +20 +-4.14559 +11 +5.63318 +21 +-4.14612 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63318 +20 +-4.14612 +11 +5.63135 +21 +-4.14526 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63135 +20 +-4.14526 +11 +5.62997 +21 +-4.14388 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62997 +20 +-4.14388 +11 +5.62546 +21 +-4.14238 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62546 +20 +-4.14238 +11 +5.62267 +21 +-4.14238 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62267 +20 +-4.14238 +11 +5.61816 +21 +-4.14388 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61816 +20 +-4.14388 +11 +5.61524 +21 +-4.1468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61524 +20 +-4.1468 +11 +5.61373 +21 +-4.14983 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61373 +20 +-4.14983 +11 +5.61202 +21 +-4.15666 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61202 +20 +-4.15666 +11 +5.61202 +21 +-4.16156 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61202 +20 +-4.16156 +11 +5.61373 +21 +-4.16839 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61373 +20 +-4.16839 +11 +5.61524 +21 +-4.17142 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61524 +20 +-4.17142 +11 +5.61816 +21 +-4.17434 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61816 +20 +-4.17434 +11 +5.62267 +21 +-4.17584 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62267 +20 +-4.17584 +11 +5.62546 +21 +-4.17584 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62546 +20 +-4.17584 +11 +5.62997 +21 +-4.17434 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62997 +20 +-4.17434 +11 +5.63135 +21 +-4.17296 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63135 +20 +-4.17296 +11 +5.63219 +21 +-4.17237 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63219 +20 +-4.17237 +11 +5.6342 +21 +-4.17219 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6342 +20 +-4.17219 +11 +5.63586 +21 +-4.17335 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63586 +20 +-4.17335 +11 +5.63638 +21 +-4.1753 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63638 +20 +-4.1753 +11 +5.63553 +21 +-4.17713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63553 +20 +-4.17713 +11 +5.63365 +21 +-4.17901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63365 +20 +-4.17901 +11 +5.63281 +21 +-4.1796 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63281 +20 +-4.1796 +11 +5.63264 +21 +-4.17961 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63264 +20 +-4.17961 +11 +5.6325 +21 +-4.17972 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6325 +20 +-4.17972 +11 +5.62687 +21 +-4.1816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62687 +20 +-4.1816 +11 +5.626 +21 +-4.18173 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.626 +20 +-4.18173 +11 +5.62594 +21 +-4.18175 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62594 +20 +-4.18175 +11 +5.62219 +21 +-4.18175 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62219 +20 +-4.18175 +11 +5.62132 +21 +-4.18159 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62132 +20 +-4.18159 +11 +5.62126 +21 +-4.1816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62126 +20 +-4.1816 +11 +5.61563 +21 +-4.17972 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61563 +20 +-4.17972 +11 +5.61473 +21 +-4.17923 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61473 +20 +-4.17923 +11 +5.61464 +21 +-4.17908 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61464 +20 +-4.17908 +11 +5.61448 +21 +-4.17901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61448 +20 +-4.17901 +11 +5.61073 +21 +-4.17526 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61073 +20 +-4.17526 +11 +5.61022 +21 +-4.17453 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61022 +20 +-4.17453 +11 +5.61017 +21 +-4.17449 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61017 +20 +-4.17449 +11 +5.6083 +21 +-4.17074 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6083 +20 +-4.17074 +11 +5.60815 +21 +-4.17025 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60815 +20 +-4.17025 +11 +5.60808 +21 +-4.17014 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60808 +20 +-4.17014 +11 +5.6062 +21 +-4.16264 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6062 +20 +-4.16264 +11 +5.60616 +21 +-4.16205 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60616 +20 +-4.16205 +11 +5.60611 +21 +-4.16192 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60611 +20 +-4.16192 +11 +5.60611 +21 +-4.1563 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60611 +20 +-4.1563 +11 +5.60622 +21 +-4.15572 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60622 +20 +-4.15572 +11 +5.6062 +21 +-4.15558 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6062 +20 +-4.15558 +11 +5.60808 +21 +-4.14808 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60808 +20 +-4.14808 +11 +5.60828 +21 +-4.14762 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60828 +20 +-4.14762 +11 +5.6083 +21 +-4.14748 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6083 +20 +-4.14748 +11 +5.61017 +21 +-4.14373 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61017 +20 +-4.14373 +11 +5.6107 +21 +-4.14302 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6107 +20 +-4.14302 +11 +5.61073 +21 +-4.14296 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61073 +20 +-4.14296 +11 +5.61448 +21 +-4.13921 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61448 +20 +-4.13921 +11 +5.61532 +21 +-4.13862 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61532 +20 +-4.13862 +11 +5.61549 +21 +-4.13861 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61549 +20 +-4.13861 +11 +5.61563 +21 +-4.1385 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61563 +20 +-4.1385 +11 +5.62126 +21 +-4.13662 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62126 +20 +-4.13662 +11 +5.62213 +21 +-4.13649 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62213 +20 +-4.13649 +11 +5.62219 +21 +-4.13647 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62219 +20 +-4.13647 +11 +5.62594 +21 +-4.13647 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62594 +20 +-4.13647 +11 +5.62681 +21 +-4.13662 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45173 +20 +-4.05778 +11 +6.45242 +21 +-4.05945 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45242 +20 +-4.05945 +11 +6.45242 +21 +-4.12975 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45242 +20 +-4.12975 +11 +6.45193 +21 +-4.13093 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45193 +20 +-4.13093 +11 +6.45173 +21 +-4.13142 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45173 +20 +-4.13142 +11 +6.40982 +21 +-4.17332 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40982 +20 +-4.17332 +11 +6.40815 +21 +-4.17402 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40815 +20 +-4.17402 +11 +6.10675 +21 +-4.17402 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10675 +20 +-4.17402 +11 +6.10508 +21 +-4.17332 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10508 +20 +-4.17332 +11 +6.10439 +21 +-4.17165 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10439 +20 +-4.17165 +11 +6.10439 +21 +-4.05945 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10439 +20 +-4.05945 +11 +6.10508 +21 +-4.05778 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10508 +20 +-4.05778 +11 +6.10675 +21 +-4.05709 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10675 +20 +-4.05709 +11 +6.10842 +21 +-4.05778 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10842 +20 +-4.05778 +11 +6.10911 +21 +-4.05945 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10911 +20 +-4.05945 +11 +6.10911 +21 +-4.16929 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10911 +20 +-4.16929 +11 +6.40717 +21 +-4.16929 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40717 +20 +-4.16929 +11 +6.4477 +21 +-4.12877 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4477 +20 +-4.12877 +11 +6.4477 +21 +-4.05945 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4477 +20 +-4.05945 +11 +6.44839 +21 +-4.05778 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44839 +20 +-4.05778 +11 +6.45006 +21 +-4.05709 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45006 +20 +-4.05709 +11 +6.45173 +21 +-4.05778 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48086 +20 +-4.07746 +11 +6.48156 +21 +-4.07913 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48156 +20 +-4.07913 +11 +6.48156 +21 +-4.09646 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48156 +20 +-4.09646 +11 +6.49888 +21 +-4.09646 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49888 +20 +-4.09646 +11 +6.50055 +21 +-4.09715 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50055 +20 +-4.09715 +11 +6.50124 +21 +-4.09882 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50124 +20 +-4.09882 +11 +6.50055 +21 +-4.10049 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50055 +20 +-4.10049 +11 +6.49888 +21 +-4.10118 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49888 +20 +-4.10118 +11 +6.48156 +21 +-4.10118 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48156 +20 +-4.10118 +11 +6.48156 +21 +-4.1185 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48156 +20 +-4.1185 +11 +6.48086 +21 +-4.12017 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48086 +20 +-4.12017 +11 +6.47919 +21 +-4.12087 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47919 +20 +-4.12087 +11 +6.47752 +21 +-4.12017 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47752 +20 +-4.12017 +11 +6.47683 +21 +-4.1185 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47683 +20 +-4.1185 +11 +6.47683 +21 +-4.10118 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47683 +20 +-4.10118 +11 +6.45951 +21 +-4.10118 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45951 +20 +-4.10118 +11 +6.45784 +21 +-4.10049 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45784 +20 +-4.10049 +11 +6.45715 +21 +-4.09882 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45715 +20 +-4.09882 +11 +6.45784 +21 +-4.09715 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45784 +20 +-4.09715 +11 +6.45951 +21 +-4.09646 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45951 +20 +-4.09646 +11 +6.47683 +21 +-4.09646 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47683 +20 +-4.09646 +11 +6.47683 +21 +-4.07913 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47683 +20 +-4.07913 +11 +6.47752 +21 +-4.07746 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47752 +20 +-4.07746 +11 +6.47919 +21 +-4.07677 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47919 +20 +-4.07677 +11 +6.48086 +21 +-4.07746 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93602 +20 +-3.77151 +11 +5.93642 +21 +-3.77168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93642 +20 +-3.77168 +11 +5.97832 +21 +-3.81358 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97832 +20 +-3.81358 +11 +5.97832 +21 +-3.81358 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97832 +20 +-3.81358 +11 +5.97902 +21 +-3.81525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97902 +20 +-3.81525 +11 +5.97902 +21 +-4.11665 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97902 +20 +-4.11665 +11 +5.97832 +21 +-4.11832 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97832 +20 +-4.11832 +11 +5.97665 +21 +-4.11902 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97665 +20 +-4.11902 +11 +5.86445 +21 +-4.11902 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86445 +20 +-4.11902 +11 +5.86278 +21 +-4.11832 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86278 +20 +-4.11832 +11 +5.86209 +21 +-4.11665 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86209 +20 +-4.11665 +11 +5.86278 +21 +-4.11498 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86278 +20 +-4.11498 +11 +5.86445 +21 +-4.11429 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86445 +20 +-4.11429 +11 +5.97429 +21 +-4.11429 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97429 +20 +-4.11429 +11 +5.97429 +21 +-3.81623 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97429 +20 +-3.81623 +11 +5.93377 +21 +-3.77571 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93377 +20 +-3.77571 +11 +5.86445 +21 +-3.77571 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86445 +20 +-3.77571 +11 +5.86278 +21 +-3.77502 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86278 +20 +-3.77502 +11 +5.86209 +21 +-3.77335 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86209 +20 +-3.77335 +11 +5.86278 +21 +-3.77168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86278 +20 +-3.77168 +11 +5.86445 +21 +-3.77098 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86445 +20 +-3.77098 +11 +5.93475 +21 +-3.77098 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93475 +20 +-3.77098 +11 +5.93602 +21 +-3.77151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74722 +20 +-3.77168 +11 +5.74791 +21 +-3.77335 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74791 +20 +-3.77335 +11 +5.74722 +21 +-3.77502 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74722 +20 +-3.77502 +11 +5.74555 +21 +-3.77571 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74555 +20 +-3.77571 +11 +5.67623 +21 +-3.77571 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67623 +20 +-3.77571 +11 +5.63571 +21 +-3.81623 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63571 +20 +-3.81623 +11 +5.63571 +21 +-4.11429 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63571 +20 +-4.11429 +11 +5.74555 +21 +-4.11429 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74555 +20 +-4.11429 +11 +5.74722 +21 +-4.11498 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74722 +20 +-4.11498 +11 +5.74791 +21 +-4.11665 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74791 +20 +-4.11665 +11 +5.74722 +21 +-4.11832 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74722 +20 +-4.11832 +11 +5.74555 +21 +-4.11902 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74555 +20 +-4.11902 +11 +5.63335 +21 +-4.11902 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63335 +20 +-4.11902 +11 +5.63168 +21 +-4.11832 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63168 +20 +-4.11832 +11 +5.63098 +21 +-4.11665 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63098 +20 +-4.11665 +11 +5.63098 +21 +-3.81525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63098 +20 +-3.81525 +11 +5.63168 +21 +-3.81358 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63168 +20 +-3.81358 +11 +5.63168 +21 +-3.81358 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63168 +20 +-3.81358 +11 +5.67358 +21 +-3.77168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67358 +20 +-3.77168 +11 +5.67407 +21 +-3.77147 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67407 +20 +-3.77147 +11 +5.67525 +21 +-3.77098 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67525 +20 +-3.77098 +11 +5.74555 +21 +-3.77098 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74555 +20 +-3.77098 +11 +5.74722 +21 +-3.77168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52918 +20 +-3.96515 +11 +5.53084 +21 +-3.96918 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53084 +20 +-3.96918 +11 +5.52996 +21 +-3.9723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52996 +20 +-3.9723 +11 +5.52765 +21 +-3.9734 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52765 +20 +-3.9734 +11 +5.52565 +21 +-3.97102 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52565 +20 +-3.97102 +11 +5.52565 +21 +-3.96315 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52565 +20 +-3.96315 +11 +5.52918 +21 +-3.96515 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52759 +20 +-3.86396 +11 +5.52927 +21 +-3.8678 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52927 +20 +-3.8678 +11 +5.52762 +21 +-3.87171 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52762 +20 +-3.87171 +11 +5.5239 +21 +-3.87321 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5239 +20 +-3.87321 +11 +5.52021 +21 +-3.87162 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52021 +20 +-3.87162 +11 +5.51859 +21 +-3.86774 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51859 +20 +-3.86774 +11 +5.52024 +21 +-3.86399 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52024 +20 +-3.86399 +11 +5.5239 +21 +-3.86252 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5239 +20 +-3.86252 +11 +5.52759 +21 +-3.86396 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52734 +20 +-3.77268 +11 +5.52909 +21 +-3.77668 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52909 +20 +-3.77668 +11 +5.52734 +21 +-3.78062 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52734 +20 +-3.78062 +11 +5.52356 +21 +-3.78209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52356 +20 +-3.78209 +11 +5.51984 +21 +-3.78055 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51984 +20 +-3.78055 +11 +5.51815 +21 +-3.77671 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51815 +20 +-3.77671 +11 +5.51981 +21 +-3.77277 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51981 +20 +-3.77277 +11 +5.52352 +21 +-3.77115 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52352 +20 +-3.77115 +11 +5.52734 +21 +-3.77268 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52918 +20 +-3.73802 +11 +5.53084 +21 +-3.74205 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53084 +20 +-3.74205 +11 +5.52996 +21 +-3.74518 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52996 +20 +-3.74518 +11 +5.52765 +21 +-3.74627 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52765 +20 +-3.74627 +11 +5.52565 +21 +-3.7439 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52565 +20 +-3.7439 +11 +5.52565 +21 +-3.73602 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52565 +20 +-3.73602 +11 +5.52918 +21 +-3.73802 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52759 +20 +-3.67277 +11 +5.52927 +21 +-3.67662 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52927 +20 +-3.67662 +11 +5.52762 +21 +-3.68052 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52762 +20 +-3.68052 +11 +5.5239 +21 +-3.68202 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5239 +20 +-3.68202 +11 +5.52021 +21 +-3.68043 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52021 +20 +-3.68043 +11 +5.51859 +21 +-3.67655 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51859 +20 +-3.67655 +11 +5.52024 +21 +-3.6728 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52024 +20 +-3.6728 +11 +5.5239 +21 +-3.67134 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5239 +20 +-3.67134 +11 +5.52759 +21 +-3.67277 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52918 +20 +-3.47565 +11 +5.53084 +21 +-3.47968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53084 +20 +-3.47968 +11 +5.52996 +21 +-3.4828 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52996 +20 +-3.4828 +11 +5.52765 +21 +-3.4839 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52765 +20 +-3.4839 +11 +5.52565 +21 +-3.48152 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52565 +20 +-3.48152 +11 +5.52565 +21 +-3.47365 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52565 +20 +-3.47365 +11 +5.52918 +21 +-3.47565 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52918 +20 +-3.3714 +11 +5.53084 +21 +-3.37543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53084 +20 +-3.37543 +11 +5.52996 +21 +-3.37855 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52996 +20 +-3.37855 +11 +5.52765 +21 +-3.37965 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52765 +20 +-3.37965 +11 +5.52565 +21 +-3.37727 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52565 +20 +-3.37727 +11 +5.52565 +21 +-3.3694 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52565 +20 +-3.3694 +11 +5.52918 +21 +-3.3714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52731 +20 +-3.33315 +11 +5.52902 +21 +-3.33715 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52902 +20 +-3.33715 +11 +5.52727 +21 +-3.34112 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52727 +20 +-3.34112 +11 +5.52349 +21 +-3.34259 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52349 +20 +-3.34259 +11 +5.51977 +21 +-3.34105 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51977 +20 +-3.34105 +11 +5.51809 +21 +-3.33721 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51809 +20 +-3.33721 +11 +5.51977 +21 +-3.33327 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51977 +20 +-3.33327 +11 +5.52352 +21 +-3.33165 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52352 +20 +-3.33165 +11 +5.52731 +21 +-3.33315 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52628 +20 +-3.25657 +11 +5.52821 +21 +-3.25802 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52821 +20 +-3.25802 +11 +5.52977 +21 +-3.26221 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52977 +20 +-3.26221 +11 +5.52827 +21 +-3.2664 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52827 +20 +-3.2664 +11 +5.52638 +21 +-3.26785 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52638 +20 +-3.26785 +11 +5.52371 +21 +-3.26834 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52371 +20 +-3.26834 +11 +5.52102 +21 +-3.26782 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52102 +20 +-3.26782 +11 +5.51909 +21 +-3.26627 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51909 +20 +-3.26627 +11 +5.51752 +21 +-3.26215 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51752 +20 +-3.26215 +11 +5.51906 +21 +-3.25809 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51906 +20 +-3.25809 +11 +5.52096 +21 +-3.25659 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52096 +20 +-3.25659 +11 +5.52362 +21 +-3.25609 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52362 +20 +-3.25609 +11 +5.52628 +21 +-3.25657 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47982 +20 +-3.22649 +11 +5.47982 +21 +-3.20259 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47982 +20 +-3.20259 +11 +5.47982 +21 +-3.19738 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47982 +20 +-3.19738 +11 +5.47982 +21 +-3.17076 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47982 +20 +-3.17076 +11 +5.56854 +21 +-3.19738 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.56854 +20 +-3.19738 +11 +5.56854 +21 +-3.20259 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.56854 +20 +-3.20259 +11 +5.56854 +21 +-4.0134 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.56854 +20 +-4.0134 +11 +5.56854 +21 +-4.01861 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.56854 +20 +-4.01861 +11 +5.56854 +21 +-4.04523 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.56854 +20 +-4.04523 +11 +5.47982 +21 +-4.01861 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47982 +20 +-4.01861 +11 +5.47982 +21 +-4.0134 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47982 +20 +-4.0134 +11 +5.47982 +21 +-3.99371 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47982 +20 +-3.99371 +11 +5.47982 +21 +-3.96927 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47982 +20 +-3.96927 +11 +5.47982 +21 +-3.93396 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47982 +20 +-3.93396 +11 +5.47982 +21 +-3.91384 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47982 +20 +-3.91384 +11 +5.47982 +21 +-3.90096 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47982 +20 +-3.90096 +11 +5.47982 +21 +-3.85696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47982 +20 +-3.85696 +11 +5.47982 +21 +-3.84109 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47982 +20 +-3.84109 +11 +5.47982 +21 +-3.78849 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47982 +20 +-3.78849 +11 +5.47982 +21 +-3.74215 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47982 +20 +-3.74215 +11 +5.47982 +21 +-3.70221 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47982 +20 +-3.70221 +11 +5.47982 +21 +-3.66577 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47982 +20 +-3.66577 +11 +5.47982 +21 +-3.62834 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47982 +20 +-3.62834 +11 +5.47982 +21 +-3.60177 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47982 +20 +-3.60177 +11 +5.47982 +21 +-3.58584 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47982 +20 +-3.58584 +11 +5.47982 +21 +-3.50421 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47982 +20 +-3.50421 +11 +5.47982 +21 +-3.47977 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47982 +20 +-3.47977 +11 +5.47982 +21 +-3.44424 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47982 +20 +-3.44424 +11 +5.47982 +21 +-3.4219 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47982 +20 +-3.4219 +11 +5.47982 +21 +-3.37552 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47982 +20 +-3.37552 +11 +5.47982 +21 +-3.34774 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47982 +20 +-3.34774 +11 +5.47982 +21 +-3.31084 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47982 +20 +-3.31084 +11 +5.47982 +21 +-3.26221 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47982 +20 +-3.26221 +11 +5.47982 +21 +-3.22649 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50627 +20 +-3.96927 +11 +5.50662 +21 +-3.9751 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50662 +20 +-3.9751 +11 +5.50766 +21 +-3.97926 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50766 +20 +-3.97926 +11 +5.5094 +21 +-3.98175 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5094 +20 +-3.98175 +11 +5.51184 +21 +-3.98259 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51184 +20 +-3.98259 +11 +5.51471 +21 +-3.98177 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51471 +20 +-3.98177 +11 +5.51752 +21 +-3.97834 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51752 +20 +-3.97834 +11 +5.51684 +21 +-3.97584 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51684 +20 +-3.97584 +11 +5.51659 +21 +-3.97515 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51659 +20 +-3.97515 +11 +5.51602 +21 +-3.9727 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51602 +20 +-3.9727 +11 +5.51584 +21 +-3.96946 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51584 +20 +-3.96946 +11 +5.51702 +21 +-3.96534 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51702 +20 +-3.96534 +11 +5.51996 +21 +-3.96327 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51996 +20 +-3.96327 +11 +5.51996 +21 +-3.97809 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51996 +20 +-3.97809 +11 +5.52181 +21 +-3.9823 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52181 +20 +-3.9823 +11 +5.52415 +21 +-3.98373 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52415 +20 +-3.98373 +11 +5.52749 +21 +-3.98421 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52749 +20 +-3.98421 +11 +5.53119 +21 +-3.98368 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53119 +20 +-3.98368 +11 +5.53459 +21 +-3.98209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53459 +20 +-3.98209 +11 +5.53727 +21 +-3.97977 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53727 +20 +-3.97977 +11 +5.53918 +21 +-3.97687 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53918 +20 +-3.97687 +11 +5.54033 +21 +-3.97339 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54033 +20 +-3.97339 +11 +5.54071 +21 +-3.96934 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54071 +20 +-3.96934 +11 +5.54019 +21 +-3.96453 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54019 +20 +-3.96453 +11 +5.53861 +21 +-3.96029 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53861 +20 +-3.96029 +11 +5.53599 +21 +-3.95662 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53599 +20 +-3.95662 +11 +5.5325 +21 +-3.95379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5325 +20 +-3.95379 +11 +5.5283 +21 +-3.95209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5283 +20 +-3.95209 +11 +5.5234 +21 +-3.95152 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5234 +20 +-3.95152 +11 +5.51936 +21 +-3.95196 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51936 +20 +-3.95196 +11 +5.51559 +21 +-3.95327 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51559 +20 +-3.95327 +11 +5.51209 +21 +-3.95546 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51209 +20 +-3.95546 +11 +5.50972 +21 +-3.95786 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50972 +20 +-3.95786 +11 +5.50787 +21 +-3.96105 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50787 +20 +-3.96105 +11 +5.50667 +21 +-3.96491 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50667 +20 +-3.96491 +11 +5.50627 +21 +-3.96927 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49284 +20 +-3.85696 +11 +5.49321 +21 +-3.86002 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49321 +20 +-3.86002 +11 +5.49449 +21 +-3.86162 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49449 +20 +-3.86162 +11 +5.49609 +21 +-3.86218 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49609 +20 +-3.86218 +11 +5.49821 +21 +-3.86227 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49821 +20 +-3.86227 +11 +5.51084 +21 +-3.86227 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51084 +20 +-3.86227 +11 +5.50868 +21 +-3.86529 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50868 +20 +-3.86529 +11 +5.50796 +21 +-3.86971 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50796 +20 +-3.86971 +11 +5.5085 +21 +-3.87306 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5085 +20 +-3.87306 +11 +5.5101 +21 +-3.87628 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5101 +20 +-3.87628 +11 +5.51277 +21 +-3.87937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51277 +20 +-3.87937 +11 +5.51616 +21 +-3.88188 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51616 +20 +-3.88188 +11 +5.51989 +21 +-3.88339 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51989 +20 +-3.88339 +11 +5.52396 +21 +-3.8839 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52396 +20 +-3.8839 +11 +5.52804 +21 +-3.88339 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52804 +20 +-3.88339 +11 +5.53177 +21 +-3.88187 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53177 +20 +-3.88187 +11 +5.53515 +21 +-3.87934 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53515 +20 +-3.87934 +11 +5.53782 +21 +-3.87624 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53782 +20 +-3.87624 +11 +5.53943 +21 +-3.87302 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53943 +20 +-3.87302 +11 +5.53996 +21 +-3.86968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53996 +20 +-3.86968 +11 +5.53915 +21 +-3.86527 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53915 +20 +-3.86527 +11 +5.53671 +21 +-3.86221 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53671 +20 +-3.86221 +11 +5.53918 +21 +-3.86087 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53918 +20 +-3.86087 +11 +5.54002 +21 +-3.8564 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54002 +20 +-3.8564 +11 +5.5396 +21 +-3.8537 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5396 +20 +-3.8537 +11 +5.53834 +21 +-3.85221 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53834 +20 +-3.85221 +11 +5.53677 +21 +-3.85168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53677 +20 +-3.85168 +11 +5.53465 +21 +-3.85159 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53465 +20 +-3.85159 +11 +5.49815 +21 +-3.85159 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49815 +20 +-3.85159 +11 +5.49602 +21 +-3.85168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49602 +20 +-3.85168 +11 +5.49446 +21 +-3.85224 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49446 +20 +-3.85224 +11 +5.49321 +21 +-3.85387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49321 +20 +-3.85387 +11 +5.49284 +21 +-3.85696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50721 +20 +-3.78849 +11 +5.50762 +21 +-3.79127 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50762 +20 +-3.79127 +11 +5.50884 +21 +-3.79277 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50884 +20 +-3.79277 +11 +5.51049 +21 +-3.7933 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51049 +20 +-3.7933 +11 +5.51265 +21 +-3.7934 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51265 +20 +-3.7934 +11 +5.53452 +21 +-3.7934 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53452 +20 +-3.7934 +11 +5.53668 +21 +-3.7933 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53668 +20 +-3.7933 +11 +5.53834 +21 +-3.79274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53834 +20 +-3.79274 +11 +5.53965 +21 +-3.79109 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53965 +20 +-3.79109 +11 +5.54002 +21 +-3.78746 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54002 +20 +-3.78746 +11 +5.53915 +21 +-3.78395 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53915 +20 +-3.78395 +11 +5.53652 +21 +-3.78252 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53652 +20 +-3.78252 +11 +5.53781 +21 +-3.7814 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53781 +20 +-3.7814 +11 +5.53921 +21 +-3.77896 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53921 +20 +-3.77896 +11 +5.53996 +21 +-3.77509 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53996 +20 +-3.77509 +11 +5.53942 +21 +-3.77148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53942 +20 +-3.77148 +11 +5.53778 +21 +-3.76807 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53778 +20 +-3.76807 +11 +5.53506 +21 +-3.76487 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53506 +20 +-3.76487 +11 +5.5316 +21 +-3.76228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5316 +20 +-3.76228 +11 +5.52779 +21 +-3.76073 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52779 +20 +-3.76073 +11 +5.52362 +21 +-3.76021 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52362 +20 +-3.76021 +11 +5.51944 +21 +-3.76072 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51944 +20 +-3.76072 +11 +5.51562 +21 +-3.76227 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51562 +20 +-3.76227 +11 +5.51215 +21 +-3.76484 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51215 +20 +-3.76484 +11 +5.50941 +21 +-3.76801 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50941 +20 +-3.76801 +11 +5.50776 +21 +-3.77135 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50776 +20 +-3.77135 +11 +5.50721 +21 +-3.77487 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50721 +20 +-3.77487 +11 +5.50804 +21 +-3.7795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50804 +20 +-3.7795 +11 +5.51052 +21 +-3.78259 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51052 +20 +-3.78259 +11 +5.50806 +21 +-3.78393 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50806 +20 +-3.78393 +11 +5.50721 +21 +-3.78849 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50627 +20 +-3.74215 +11 +5.50662 +21 +-3.74797 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50662 +20 +-3.74797 +11 +5.50766 +21 +-3.75213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50766 +20 +-3.75213 +11 +5.5094 +21 +-3.75463 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5094 +20 +-3.75463 +11 +5.51184 +21 +-3.75546 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51184 +20 +-3.75546 +11 +5.51471 +21 +-3.75465 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51471 +20 +-3.75465 +11 +5.51752 +21 +-3.75121 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51752 +20 +-3.75121 +11 +5.51684 +21 +-3.74871 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51684 +20 +-3.74871 +11 +5.51659 +21 +-3.74802 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51659 +20 +-3.74802 +11 +5.51602 +21 +-3.74557 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51602 +20 +-3.74557 +11 +5.51584 +21 +-3.74234 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51584 +20 +-3.74234 +11 +5.51702 +21 +-3.73821 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51702 +20 +-3.73821 +11 +5.51996 +21 +-3.73615 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51996 +20 +-3.73615 +11 +5.51996 +21 +-3.75096 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51996 +20 +-3.75096 +11 +5.52181 +21 +-3.75518 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52181 +20 +-3.75518 +11 +5.52415 +21 +-3.75661 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52415 +20 +-3.75661 +11 +5.52749 +21 +-3.75709 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52749 +20 +-3.75709 +11 +5.53119 +21 +-3.75655 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53119 +20 +-3.75655 +11 +5.53459 +21 +-3.75496 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53459 +20 +-3.75496 +11 +5.53727 +21 +-3.75264 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53727 +20 +-3.75264 +11 +5.53918 +21 +-3.74974 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53918 +20 +-3.74974 +11 +5.54033 +21 +-3.74627 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54033 +20 +-3.74627 +11 +5.54071 +21 +-3.74221 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54071 +20 +-3.74221 +11 +5.54019 +21 +-3.73741 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54019 +20 +-3.73741 +11 +5.53861 +21 +-3.73317 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53861 +20 +-3.73317 +11 +5.53599 +21 +-3.72949 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53599 +20 +-3.72949 +11 +5.5325 +21 +-3.72666 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5325 +20 +-3.72666 +11 +5.5283 +21 +-3.72496 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5283 +20 +-3.72496 +11 +5.5234 +21 +-3.7244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5234 +20 +-3.7244 +11 +5.51936 +21 +-3.72484 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51936 +20 +-3.72484 +11 +5.51559 +21 +-3.72615 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51559 +20 +-3.72615 +11 +5.51209 +21 +-3.72834 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51209 +20 +-3.72834 +11 +5.50972 +21 +-3.73073 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50972 +20 +-3.73073 +11 +5.50787 +21 +-3.73393 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50787 +20 +-3.73393 +11 +5.50667 +21 +-3.73778 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50667 +20 +-3.73778 +11 +5.50627 +21 +-3.74215 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49284 +20 +-3.66577 +11 +5.49321 +21 +-3.66884 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49321 +20 +-3.66884 +11 +5.49449 +21 +-3.67043 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49449 +20 +-3.67043 +11 +5.49609 +21 +-3.67099 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49609 +20 +-3.67099 +11 +5.49821 +21 +-3.67109 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49821 +20 +-3.67109 +11 +5.51084 +21 +-3.67109 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51084 +20 +-3.67109 +11 +5.50868 +21 +-3.6741 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50868 +20 +-3.6741 +11 +5.50796 +21 +-3.67852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50796 +20 +-3.67852 +11 +5.5085 +21 +-3.68187 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5085 +20 +-3.68187 +11 +5.5101 +21 +-3.68509 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5101 +20 +-3.68509 +11 +5.51277 +21 +-3.68818 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51277 +20 +-3.68818 +11 +5.51616 +21 +-3.6907 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51616 +20 +-3.6907 +11 +5.51989 +21 +-3.69221 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51989 +20 +-3.69221 +11 +5.52396 +21 +-3.69271 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52396 +20 +-3.69271 +11 +5.52804 +21 +-3.6922 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52804 +20 +-3.6922 +11 +5.53177 +21 +-3.69068 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53177 +20 +-3.69068 +11 +5.53515 +21 +-3.68815 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53515 +20 +-3.68815 +11 +5.53782 +21 +-3.68505 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53782 +20 +-3.68505 +11 +5.53943 +21 +-3.68183 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53943 +20 +-3.68183 +11 +5.53996 +21 +-3.67849 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53996 +20 +-3.67849 +11 +5.53915 +21 +-3.67408 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53915 +20 +-3.67408 +11 +5.53671 +21 +-3.67102 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53671 +20 +-3.67102 +11 +5.53918 +21 +-3.66968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53918 +20 +-3.66968 +11 +5.54002 +21 +-3.66521 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54002 +20 +-3.66521 +11 +5.5396 +21 +-3.66251 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5396 +20 +-3.66251 +11 +5.53834 +21 +-3.66102 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53834 +20 +-3.66102 +11 +5.53677 +21 +-3.66049 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53677 +20 +-3.66049 +11 +5.53465 +21 +-3.6604 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53465 +20 +-3.6604 +11 +5.49815 +21 +-3.6604 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49815 +20 +-3.6604 +11 +5.49602 +21 +-3.66049 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49602 +20 +-3.66049 +11 +5.49446 +21 +-3.66105 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49446 +20 +-3.66105 +11 +5.49321 +21 +-3.66268 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49321 +20 +-3.66268 +11 +5.49284 +21 +-3.66577 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50627 +20 +-3.47977 +11 +5.50662 +21 +-3.4856 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50662 +20 +-3.4856 +11 +5.50766 +21 +-3.48976 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50766 +20 +-3.48976 +11 +5.5094 +21 +-3.49225 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5094 +20 +-3.49225 +11 +5.51184 +21 +-3.49309 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51184 +20 +-3.49309 +11 +5.51471 +21 +-3.49227 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51471 +20 +-3.49227 +11 +5.51752 +21 +-3.48884 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51752 +20 +-3.48884 +11 +5.51684 +21 +-3.48634 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51684 +20 +-3.48634 +11 +5.51659 +21 +-3.48565 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51659 +20 +-3.48565 +11 +5.51602 +21 +-3.4832 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51602 +20 +-3.4832 +11 +5.51584 +21 +-3.47996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51584 +20 +-3.47996 +11 +5.51702 +21 +-3.47584 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51702 +20 +-3.47584 +11 +5.51996 +21 +-3.47377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51996 +20 +-3.47377 +11 +5.51996 +21 +-3.48859 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51996 +20 +-3.48859 +11 +5.52181 +21 +-3.4928 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52181 +20 +-3.4928 +11 +5.52415 +21 +-3.49423 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52415 +20 +-3.49423 +11 +5.52749 +21 +-3.49471 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52749 +20 +-3.49471 +11 +5.53119 +21 +-3.49418 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53119 +20 +-3.49418 +11 +5.53459 +21 +-3.49259 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53459 +20 +-3.49259 +11 +5.53727 +21 +-3.49027 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53727 +20 +-3.49027 +11 +5.53918 +21 +-3.48737 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53918 +20 +-3.48737 +11 +5.54033 +21 +-3.48389 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54033 +20 +-3.48389 +11 +5.54071 +21 +-3.47984 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54071 +20 +-3.47984 +11 +5.54019 +21 +-3.47503 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54019 +20 +-3.47503 +11 +5.53861 +21 +-3.47079 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53861 +20 +-3.47079 +11 +5.53599 +21 +-3.46712 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53599 +20 +-3.46712 +11 +5.5325 +21 +-3.46429 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5325 +20 +-3.46429 +11 +5.5283 +21 +-3.46259 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5283 +20 +-3.46259 +11 +5.5234 +21 +-3.46202 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5234 +20 +-3.46202 +11 +5.51936 +21 +-3.46246 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51936 +20 +-3.46246 +11 +5.51559 +21 +-3.46377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51559 +20 +-3.46377 +11 +5.51209 +21 +-3.46596 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51209 +20 +-3.46596 +11 +5.50972 +21 +-3.46836 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50972 +20 +-3.46836 +11 +5.50787 +21 +-3.47155 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50787 +20 +-3.47155 +11 +5.50667 +21 +-3.47541 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50667 +20 +-3.47541 +11 +5.50627 +21 +-3.47977 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50627 +20 +-3.37552 +11 +5.50662 +21 +-3.38135 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50662 +20 +-3.38135 +11 +5.50766 +21 +-3.38551 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50766 +20 +-3.38551 +11 +5.5094 +21 +-3.388 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5094 +20 +-3.388 +11 +5.51184 +21 +-3.38884 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51184 +20 +-3.38884 +11 +5.51471 +21 +-3.38802 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51471 +20 +-3.38802 +11 +5.51752 +21 +-3.38459 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51752 +20 +-3.38459 +11 +5.51684 +21 +-3.38209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51684 +20 +-3.38209 +11 +5.51659 +21 +-3.3814 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51659 +20 +-3.3814 +11 +5.51602 +21 +-3.37895 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51602 +20 +-3.37895 +11 +5.51584 +21 +-3.37571 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51584 +20 +-3.37571 +11 +5.51702 +21 +-3.37159 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51702 +20 +-3.37159 +11 +5.51996 +21 +-3.36952 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51996 +20 +-3.36952 +11 +5.51996 +21 +-3.38434 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51996 +20 +-3.38434 +11 +5.52181 +21 +-3.38855 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52181 +20 +-3.38855 +11 +5.52415 +21 +-3.38998 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52415 +20 +-3.38998 +11 +5.52749 +21 +-3.39046 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52749 +20 +-3.39046 +11 +5.53119 +21 +-3.38993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53119 +20 +-3.38993 +11 +5.53459 +21 +-3.38834 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53459 +20 +-3.38834 +11 +5.53727 +21 +-3.38602 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53727 +20 +-3.38602 +11 +5.53918 +21 +-3.38312 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53918 +20 +-3.38312 +11 +5.54033 +21 +-3.37964 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54033 +20 +-3.37964 +11 +5.54071 +21 +-3.37559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54071 +20 +-3.37559 +11 +5.54019 +21 +-3.37078 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54019 +20 +-3.37078 +11 +5.53861 +21 +-3.36654 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53861 +20 +-3.36654 +11 +5.53599 +21 +-3.36287 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53599 +20 +-3.36287 +11 +5.5325 +21 +-3.36004 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5325 +20 +-3.36004 +11 +5.5283 +21 +-3.35834 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5283 +20 +-3.35834 +11 +5.5234 +21 +-3.35777 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5234 +20 +-3.35777 +11 +5.51936 +21 +-3.35821 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51936 +20 +-3.35821 +11 +5.51559 +21 +-3.35952 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51559 +20 +-3.35952 +11 +5.51209 +21 +-3.36171 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51209 +20 +-3.36171 +11 +5.50972 +21 +-3.36411 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50972 +20 +-3.36411 +11 +5.50787 +21 +-3.3673 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50787 +20 +-3.3673 +11 +5.50667 +21 +-3.37116 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50667 +20 +-3.37116 +11 +5.50627 +21 +-3.37552 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50715 +20 +-3.34774 +11 +5.50757 +21 +-3.35123 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50757 +20 +-3.35123 +11 +5.50884 +21 +-3.35302 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50884 +20 +-3.35302 +11 +5.51043 +21 +-3.35362 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51043 +20 +-3.35362 +11 +5.51259 +21 +-3.35371 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51259 +20 +-3.35371 +11 +5.5499 +21 +-3.35371 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5499 +20 +-3.35371 +11 +5.55206 +21 +-3.35362 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55206 +20 +-3.35362 +11 +5.55371 +21 +-3.35305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55371 +20 +-3.35305 +11 +5.55502 +21 +-3.3514 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55502 +20 +-3.3514 +11 +5.5554 +21 +-3.34824 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5554 +20 +-3.34824 +11 +5.55502 +21 +-3.34509 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55502 +20 +-3.34509 +11 +5.55374 +21 +-3.34343 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55374 +20 +-3.34343 +11 +5.55212 +21 +-3.34287 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55212 +20 +-3.34287 +11 +5.54996 +21 +-3.34277 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54996 +20 +-3.34277 +11 +5.53684 +21 +-3.34277 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53684 +20 +-3.34277 +11 +5.53918 +21 +-3.3397 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53918 +20 +-3.3397 +11 +5.53996 +21 +-3.33559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53996 +20 +-3.33559 +11 +5.53941 +21 +-3.33198 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53941 +20 +-3.33198 +11 +5.53777 +21 +-3.32857 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53777 +20 +-3.32857 +11 +5.53502 +21 +-3.32537 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53502 +20 +-3.32537 +11 +5.53156 +21 +-3.32278 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53156 +20 +-3.32278 +11 +5.52773 +21 +-3.32123 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52773 +20 +-3.32123 +11 +5.52356 +21 +-3.32071 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52356 +20 +-3.32071 +11 +5.51938 +21 +-3.32122 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51938 +20 +-3.32122 +11 +5.51557 +21 +-3.32277 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51557 +20 +-3.32277 +11 +5.51212 +21 +-3.32534 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51212 +20 +-3.32534 +11 +5.50939 +21 +-3.32853 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50939 +20 +-3.32853 +11 +5.50776 +21 +-3.33195 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50776 +20 +-3.33195 +11 +5.50721 +21 +-3.33559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50721 +20 +-3.33559 +11 +5.50796 +21 +-3.33976 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50796 +20 +-3.33976 +11 +5.51021 +21 +-3.3429 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51021 +20 +-3.3429 +11 +5.50791 +21 +-3.34436 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50791 +20 +-3.34436 +11 +5.50715 +21 +-3.34774 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50652 +20 +-3.26221 +11 +5.507 +21 +-3.26627 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.507 +20 +-3.26627 +11 +5.50843 +21 +-3.27018 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50843 +20 +-3.27018 +11 +5.51087 +21 +-3.27373 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51087 +20 +-3.27373 +11 +5.51437 +21 +-3.27671 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51437 +20 +-3.27671 +11 +5.51869 +21 +-3.27873 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51869 +20 +-3.27873 +11 +5.52359 +21 +-3.2794 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52359 +20 +-3.2794 +11 +5.52829 +21 +-3.27882 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52829 +20 +-3.27882 +11 +5.53241 +21 +-3.27709 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53241 +20 +-3.27709 +11 +5.53593 +21 +-3.27421 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53593 +20 +-3.27421 +11 +5.53862 +21 +-3.27058 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53862 +20 +-3.27058 +11 +5.54024 +21 +-3.2666 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54024 +20 +-3.2666 +11 +5.54077 +21 +-3.26227 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54077 +20 +-3.26227 +11 +5.54023 +21 +-3.25794 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54023 +20 +-3.25794 +11 +5.53861 +21 +-3.25394 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53861 +20 +-3.25394 +11 +5.5359 +21 +-3.25027 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5359 +20 +-3.25027 +11 +5.53236 +21 +-3.24736 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53236 +20 +-3.24736 +11 +5.52823 +21 +-3.24561 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52823 +20 +-3.24561 +11 +5.52352 +21 +-3.24502 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52352 +20 +-3.24502 +11 +5.51878 +21 +-3.24569 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51878 +20 +-3.24569 +11 +5.51456 +21 +-3.24768 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51456 +20 +-3.24768 +11 +5.51107 +21 +-3.25064 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51107 +20 +-3.25064 +11 +5.50856 +21 +-3.25421 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50856 +20 +-3.25421 +11 +5.50703 +21 +-3.25815 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50703 +20 +-3.25815 +11 +5.50652 +21 +-3.26221 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50709 +20 +-3.99371 +11 +5.50749 +21 +-3.9969 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50749 +20 +-3.9969 +11 +5.50871 +21 +-3.99859 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50871 +20 +-3.99859 +11 +5.51037 +21 +-3.99918 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51037 +20 +-3.99918 +11 +5.51252 +21 +-3.99927 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51252 +20 +-3.99927 +11 +5.52565 +21 +-3.99927 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52565 +20 +-3.99927 +11 +5.52852 +21 +-4.00074 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52852 +20 +-4.00074 +11 +5.52971 +21 +-4.0039 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52971 +20 +-4.0039 +11 +5.52921 +21 +-4.00662 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52921 +20 +-4.00662 +11 +5.52871 +21 +-4.00877 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52871 +20 +-4.00877 +11 +5.53109 +21 +-4.01221 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53109 +20 +-4.01221 +11 +5.53546 +21 +-4.0134 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53546 +20 +-4.0134 +11 +5.53837 +21 +-4.01262 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53837 +20 +-4.01262 +11 +5.53965 +21 +-4.01065 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53965 +20 +-4.01065 +11 +5.54018 +21 +-4.00846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54018 +20 +-4.00846 +11 +5.54034 +21 +-4.00599 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54034 +20 +-4.00599 +11 +5.53927 +21 +-4.00259 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53927 +20 +-4.00259 +11 +5.53759 +21 +-4.00005 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53759 +20 +-4.00005 +11 +5.53652 +21 +-3.99915 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53652 +20 +-3.99915 +11 +5.53859 +21 +-3.99846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53859 +20 +-3.99846 +11 +5.53966 +21 +-3.99682 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53966 +20 +-3.99682 +11 +5.54002 +21 +-3.99377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54002 +20 +-3.99377 +11 +5.5396 +21 +-3.99055 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5396 +20 +-3.99055 +11 +5.53834 +21 +-3.9889 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53834 +20 +-3.9889 +11 +5.53674 +21 +-3.98837 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53674 +20 +-3.98837 +11 +5.53459 +21 +-3.98827 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53459 +20 +-3.98827 +11 +5.51265 +21 +-3.98827 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51265 +20 +-3.98827 +11 +5.51084 +21 +-3.98827 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51084 +20 +-3.98827 +11 +5.50815 +21 +-3.9894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50815 +20 +-3.9894 +11 +5.50709 +21 +-3.99371 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50702 +20 +-3.93396 +11 +5.5074 +21 +-3.93712 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5074 +20 +-3.93712 +11 +5.50893 +21 +-3.93893 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50893 +20 +-3.93893 +11 +5.51246 +21 +-3.93952 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51246 +20 +-3.93952 +11 +5.52921 +21 +-3.93952 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52921 +20 +-3.93952 +11 +5.52896 +21 +-3.94352 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52896 +20 +-3.94352 +11 +5.52971 +21 +-3.94734 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52971 +20 +-3.94734 +11 +5.53137 +21 +-3.94862 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53137 +20 +-3.94862 +11 +5.53446 +21 +-3.94902 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53446 +20 +-3.94902 +11 +5.53759 +21 +-3.94865 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53759 +20 +-3.94865 +11 +5.53937 +21 +-3.94701 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53937 +20 +-3.94701 +11 +5.53996 +21 +-3.94359 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53996 +20 +-3.94359 +11 +5.53959 +21 +-3.93952 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53959 +20 +-3.93952 +11 +5.54302 +21 +-3.93952 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54302 +20 +-3.93952 +11 +5.54459 +21 +-3.94184 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54459 +20 +-3.94184 +11 +5.54459 +21 +-3.94359 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54459 +20 +-3.94359 +11 +5.54571 +21 +-3.94634 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54571 +20 +-3.94634 +11 +5.55002 +21 +-3.9474 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55002 +20 +-3.9474 +11 +5.55323 +21 +-3.94698 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55323 +20 +-3.94698 +11 +5.55484 +21 +-3.94571 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55484 +20 +-3.94571 +11 +5.55543 +21 +-3.94405 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55543 +20 +-3.94405 +11 +5.55552 +21 +-3.9419 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55552 +20 +-3.9419 +11 +5.55509 +21 +-3.93791 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55509 +20 +-3.93791 +11 +5.55379 +21 +-3.93459 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55379 +20 +-3.93459 +11 +5.55162 +21 +-3.93196 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55162 +20 +-3.93196 +11 +5.54749 +21 +-3.92938 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54749 +20 +-3.92938 +11 +5.5429 +21 +-3.92852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5429 +20 +-3.92852 +11 +5.53959 +21 +-3.92852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53959 +20 +-3.92852 +11 +5.53959 +21 +-3.92646 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53959 +20 +-3.92646 +11 +5.53831 +21 +-3.9237 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53831 +20 +-3.9237 +11 +5.53446 +21 +-3.92277 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53446 +20 +-3.92277 +11 +5.5299 +21 +-3.92396 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5299 +20 +-3.92396 +11 +5.52915 +21 +-3.92627 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52915 +20 +-3.92627 +11 +5.52915 +21 +-3.92852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52915 +20 +-3.92852 +11 +5.51259 +21 +-3.92852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51259 +20 +-3.92852 +11 +5.5104 +21 +-3.92862 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5104 +20 +-3.92862 +11 +5.50874 +21 +-3.92921 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50874 +20 +-3.92921 +11 +5.50743 +21 +-3.93087 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50743 +20 +-3.93087 +11 +5.50702 +21 +-3.93396 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54446 +20 +-3.91387 +11 +5.54484 +21 +-3.91702 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54484 +20 +-3.91702 +11 +5.54612 +21 +-3.91868 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54612 +20 +-3.91868 +11 +5.54774 +21 +-3.91924 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54774 +20 +-3.91924 +11 +5.5499 +21 +-3.91934 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5499 +20 +-3.91934 +11 +5.55206 +21 +-3.91924 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55206 +20 +-3.91924 +11 +5.55371 +21 +-3.91865 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55371 +20 +-3.91865 +11 +5.55498 +21 +-3.91705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55498 +20 +-3.91705 +11 +5.5554 +21 +-3.9139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5554 +20 +-3.9139 +11 +5.55498 +21 +-3.91068 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55498 +20 +-3.91068 +11 +5.55371 +21 +-3.90902 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55371 +20 +-3.90902 +11 +5.55212 +21 +-3.90849 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55212 +20 +-3.90849 +11 +5.54996 +21 +-3.9084 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54996 +20 +-3.9084 +11 +5.54781 +21 +-3.90849 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54781 +20 +-3.90849 +11 +5.54615 +21 +-3.90905 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54615 +20 +-3.90905 +11 +5.54484 +21 +-3.91071 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54484 +20 +-3.91071 +11 +5.54446 +21 +-3.91387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50709 +20 +-3.91384 +11 +5.50749 +21 +-3.91704 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50749 +20 +-3.91704 +11 +5.50871 +21 +-3.91865 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50871 +20 +-3.91865 +11 +5.51037 +21 +-3.91924 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51037 +20 +-3.91924 +11 +5.51252 +21 +-3.91934 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51252 +20 +-3.91934 +11 +5.5344 +21 +-3.91934 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5344 +20 +-3.91934 +11 +5.53621 +21 +-3.91927 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53621 +20 +-3.91927 +11 +5.5389 +21 +-3.91815 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5389 +20 +-3.91815 +11 +5.53996 +21 +-3.9139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53996 +20 +-3.9139 +11 +5.53996 +21 +-3.91387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53996 +20 +-3.91387 +11 +5.53956 +21 +-3.91068 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53956 +20 +-3.91068 +11 +5.53834 +21 +-3.90902 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53834 +20 +-3.90902 +11 +5.53668 +21 +-3.90849 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53668 +20 +-3.90849 +11 +5.53452 +21 +-3.9084 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53452 +20 +-3.9084 +11 +5.51259 +21 +-3.9084 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51259 +20 +-3.9084 +11 +5.5104 +21 +-3.90849 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5104 +20 +-3.90849 +11 +5.50877 +21 +-3.90902 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50877 +20 +-3.90902 +11 +5.50751 +21 +-3.91066 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50751 +20 +-3.91066 +11 +5.50709 +21 +-3.91384 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50706 +20 +-3.90096 +11 +5.50771 +21 +-3.90371 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50771 +20 +-3.90371 +11 +5.50935 +21 +-3.90465 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50935 +20 +-3.90465 +11 +5.51252 +21 +-3.90496 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51252 +20 +-3.90496 +11 +5.51696 +21 +-3.90371 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51696 +20 +-3.90371 +11 +5.51749 +21 +-3.90265 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51749 +20 +-3.90265 +11 +5.51759 +21 +-3.90093 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51759 +20 +-3.90093 +11 +5.51818 +21 +-3.89927 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51818 +20 +-3.89927 +11 +5.52102 +21 +-3.8989 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52102 +20 +-3.8989 +11 +5.54996 +21 +-3.8989 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54996 +20 +-3.8989 +11 +5.55215 +21 +-3.8988 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55215 +20 +-3.8988 +11 +5.55384 +21 +-3.89821 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55384 +20 +-3.89821 +11 +5.5551 +21 +-3.89655 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5551 +20 +-3.89655 +11 +5.55552 +21 +-3.89346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55552 +20 +-3.89346 +11 +5.5551 +21 +-3.89024 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5551 +20 +-3.89024 +11 +5.55384 +21 +-3.88859 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55384 +20 +-3.88859 +11 +5.55218 +21 +-3.88805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55218 +20 +-3.88805 +11 +5.55002 +21 +-3.88796 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55002 +20 +-3.88796 +11 +5.52027 +21 +-3.88796 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52027 +20 +-3.88796 +11 +5.51449 +21 +-3.8884 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51449 +20 +-3.8884 +11 +5.51052 +21 +-3.88971 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51052 +20 +-3.88971 +11 +5.50845 +21 +-3.89199 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50845 +20 +-3.89199 +11 +5.50734 +21 +-3.89596 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50734 +20 +-3.89596 +11 +5.50706 +21 +-3.90096 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50709 +20 +-3.84109 +11 +5.50751 +21 +-3.84429 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50751 +20 +-3.84429 +11 +5.50877 +21 +-3.8459 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50877 +20 +-3.8459 +11 +5.51043 +21 +-3.84649 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51043 +20 +-3.84649 +11 +5.51259 +21 +-3.84659 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51259 +20 +-3.84659 +11 +5.52352 +21 +-3.84659 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52352 +20 +-3.84659 +11 +5.52888 +21 +-3.84621 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52888 +20 +-3.84621 +11 +5.53312 +21 +-3.84509 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53312 +20 +-3.84509 +11 +5.53624 +21 +-3.84321 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53624 +20 +-3.84321 +11 +5.53913 +21 +-3.83943 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53913 +20 +-3.83943 +11 +5.54009 +21 +-3.83484 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54009 +20 +-3.83484 +11 +5.53887 +21 +-3.83046 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53887 +20 +-3.83046 +11 +5.53662 +21 +-3.82737 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53662 +20 +-3.82737 +11 +5.53465 +21 +-3.82571 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53465 +20 +-3.82571 +11 +5.53767 +21 +-3.82327 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53767 +20 +-3.82327 +11 +5.53948 +21 +-3.8201 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53948 +20 +-3.8201 +11 +5.54009 +21 +-3.81621 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54009 +20 +-3.81621 +11 +5.53898 +21 +-3.81238 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53898 +20 +-3.81238 +11 +5.53565 +21 +-3.80915 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53565 +20 +-3.80915 +11 +5.5389 +21 +-3.80809 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5389 +20 +-3.80809 +11 +5.54002 +21 +-3.80352 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54002 +20 +-3.80352 +11 +5.5396 +21 +-3.80066 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5396 +20 +-3.80066 +11 +5.53834 +21 +-3.79909 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53834 +20 +-3.79909 +11 +5.53674 +21 +-3.79849 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53674 +20 +-3.79849 +11 +5.53459 +21 +-3.7984 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53459 +20 +-3.7984 +11 +5.51259 +21 +-3.7984 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51259 +20 +-3.7984 +11 +5.5104 +21 +-3.79849 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5104 +20 +-3.79849 +11 +5.50877 +21 +-3.79902 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50877 +20 +-3.79902 +11 +5.50751 +21 +-3.80066 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50751 +20 +-3.80066 +11 +5.50709 +21 +-3.80384 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50709 +20 +-3.80384 +11 +5.50749 +21 +-3.80702 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50749 +20 +-3.80702 +11 +5.50871 +21 +-3.80871 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50871 +20 +-3.80871 +11 +5.51037 +21 +-3.8093 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51037 +20 +-3.8093 +11 +5.51252 +21 +-3.8094 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51252 +20 +-3.8094 +11 +5.52359 +21 +-3.8094 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52359 +20 +-3.8094 +11 +5.52766 +21 +-3.81034 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52766 +20 +-3.81034 +11 +5.52902 +21 +-3.81315 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52902 +20 +-3.81315 +11 +5.52766 +21 +-3.81605 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52766 +20 +-3.81605 +11 +5.52359 +21 +-3.81702 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52359 +20 +-3.81702 +11 +5.51265 +21 +-3.81702 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51265 +20 +-3.81702 +11 +5.51049 +21 +-3.81712 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51049 +20 +-3.81712 +11 +5.50884 +21 +-3.81765 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50884 +20 +-3.81765 +11 +5.50752 +21 +-3.81929 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50752 +20 +-3.81929 +11 +5.50709 +21 +-3.82246 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50709 +20 +-3.82246 +11 +5.50751 +21 +-3.82568 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50751 +20 +-3.82568 +11 +5.50877 +21 +-3.82734 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50877 +20 +-3.82734 +11 +5.5104 +21 +-3.82793 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5104 +20 +-3.82793 +11 +5.51259 +21 +-3.82802 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51259 +20 +-3.82802 +11 +5.52352 +21 +-3.82802 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52352 +20 +-3.82802 +11 +5.52759 +21 +-3.8288 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52759 +20 +-3.8288 +11 +5.52902 +21 +-3.83177 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52902 +20 +-3.83177 +11 +5.52766 +21 +-3.83468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52766 +20 +-3.83468 +11 +5.52359 +21 +-3.83565 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52359 +20 +-3.83565 +11 +5.51265 +21 +-3.83565 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51265 +20 +-3.83565 +11 +5.51049 +21 +-3.83574 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51049 +20 +-3.83574 +11 +5.50884 +21 +-3.83627 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50884 +20 +-3.83627 +11 +5.50752 +21 +-3.83791 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50752 +20 +-3.83791 +11 +5.50709 +21 +-3.84109 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50709 +20 +-3.70221 +11 +5.50749 +21 +-3.7054 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50749 +20 +-3.7054 +11 +5.50871 +21 +-3.70709 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50871 +20 +-3.70709 +11 +5.51037 +21 +-3.70768 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51037 +20 +-3.70768 +11 +5.51252 +21 +-3.70777 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51252 +20 +-3.70777 +11 +5.52565 +21 +-3.70777 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52565 +20 +-3.70777 +11 +5.52852 +21 +-3.70924 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52852 +20 +-3.70924 +11 +5.52971 +21 +-3.7124 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52971 +20 +-3.7124 +11 +5.52921 +21 +-3.71512 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52921 +20 +-3.71512 +11 +5.52871 +21 +-3.71727 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52871 +20 +-3.71727 +11 +5.53109 +21 +-3.72071 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53109 +20 +-3.72071 +11 +5.53546 +21 +-3.7219 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53546 +20 +-3.7219 +11 +5.53837 +21 +-3.72112 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53837 +20 +-3.72112 +11 +5.53965 +21 +-3.71915 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53965 +20 +-3.71915 +11 +5.54018 +21 +-3.71696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54018 +20 +-3.71696 +11 +5.54034 +21 +-3.71449 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54034 +20 +-3.71449 +11 +5.53927 +21 +-3.71109 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53927 +20 +-3.71109 +11 +5.53759 +21 +-3.70855 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53759 +20 +-3.70855 +11 +5.53652 +21 +-3.70765 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53652 +20 +-3.70765 +11 +5.53859 +21 +-3.70696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53859 +20 +-3.70696 +11 +5.53966 +21 +-3.70532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53966 +20 +-3.70532 +11 +5.54002 +21 +-3.70227 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54002 +20 +-3.70227 +11 +5.5396 +21 +-3.69905 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5396 +20 +-3.69905 +11 +5.53834 +21 +-3.6974 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53834 +20 +-3.6974 +11 +5.53674 +21 +-3.69687 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53674 +20 +-3.69687 +11 +5.53459 +21 +-3.69677 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53459 +20 +-3.69677 +11 +5.51265 +21 +-3.69677 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51265 +20 +-3.69677 +11 +5.51084 +21 +-3.69677 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51084 +20 +-3.69677 +11 +5.50815 +21 +-3.6979 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50815 +20 +-3.6979 +11 +5.50709 +21 +-3.70221 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50677 +20 +-3.62834 +11 +5.5074 +21 +-3.63312 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5074 +20 +-3.63312 +11 +5.50927 +21 +-3.63709 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50927 +20 +-3.63709 +11 +5.51141 +21 +-3.63966 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51141 +20 +-3.63966 +11 +5.51371 +21 +-3.64052 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51371 +20 +-3.64052 +11 +5.51696 +21 +-3.63909 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51696 +20 +-3.63909 +11 +5.51945 +21 +-3.6366 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51945 +20 +-3.6366 +11 +5.52027 +21 +-3.63452 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52027 +20 +-3.63452 +11 +5.51912 +21 +-3.63174 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51912 +20 +-3.63174 +11 +5.51796 +21 +-3.62805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51796 +20 +-3.62805 +11 +5.51943 +21 +-3.62434 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51943 +20 +-3.62434 +11 +5.52356 +21 +-3.62259 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52356 +20 +-3.62259 +11 +5.52771 +21 +-3.6244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52771 +20 +-3.6244 +11 +5.52921 +21 +-3.6283 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52921 +20 +-3.6283 +11 +5.52815 +21 +-3.63152 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52815 +20 +-3.63152 +11 +5.52677 +21 +-3.6349 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52677 +20 +-3.6349 +11 +5.52763 +21 +-3.63701 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52763 +20 +-3.63701 +11 +5.53021 +21 +-3.63921 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53021 +20 +-3.63921 +11 +5.53381 +21 +-3.64052 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53381 +20 +-3.64052 +11 +5.53665 +21 +-3.6389 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53665 +20 +-3.6389 +11 +5.53784 +21 +-3.63715 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53784 +20 +-3.63715 +11 +5.53846 +21 +-3.63615 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53846 +20 +-3.63615 +11 +5.53974 +21 +-3.63284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53974 +20 +-3.63284 +11 +5.5404 +21 +-3.62821 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5404 +20 +-3.62821 +11 +5.53994 +21 +-3.62437 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53994 +20 +-3.62437 +11 +5.53857 +21 +-3.62068 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53857 +20 +-3.62068 +11 +5.53627 +21 +-3.61715 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53627 +20 +-3.61715 +11 +5.53395 +21 +-3.61482 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53395 +20 +-3.61482 +11 +5.53099 +21 +-3.61296 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53099 +20 +-3.61296 +11 +5.52752 +21 +-3.61174 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52752 +20 +-3.61174 +11 +5.52368 +21 +-3.61134 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52368 +20 +-3.61134 +11 +5.51982 +21 +-3.61174 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51982 +20 +-3.61174 +11 +5.51631 +21 +-3.61296 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51631 +20 +-3.61296 +11 +5.5133 +21 +-3.61482 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5133 +20 +-3.61482 +11 +5.51096 +21 +-3.61715 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51096 +20 +-3.61715 +11 +5.50864 +21 +-3.62078 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50864 +20 +-3.62078 +11 +5.50724 +21 +-3.62451 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50724 +20 +-3.62451 +11 +5.50677 +21 +-3.62834 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54446 +20 +-3.6018 +11 +5.54484 +21 +-3.60496 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54484 +20 +-3.60496 +11 +5.54612 +21 +-3.60662 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54612 +20 +-3.60662 +11 +5.54774 +21 +-3.60718 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54774 +20 +-3.60718 +11 +5.5499 +21 +-3.60727 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5499 +20 +-3.60727 +11 +5.55206 +21 +-3.60718 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55206 +20 +-3.60718 +11 +5.55371 +21 +-3.60659 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55371 +20 +-3.60659 +11 +5.55498 +21 +-3.60499 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55498 +20 +-3.60499 +11 +5.5554 +21 +-3.60184 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5554 +20 +-3.60184 +11 +5.55498 +21 +-3.59862 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55498 +20 +-3.59862 +11 +5.55371 +21 +-3.59696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55371 +20 +-3.59696 +11 +5.55212 +21 +-3.59643 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55212 +20 +-3.59643 +11 +5.54996 +21 +-3.59634 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54996 +20 +-3.59634 +11 +5.54781 +21 +-3.59643 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54781 +20 +-3.59643 +11 +5.54615 +21 +-3.59699 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54615 +20 +-3.59699 +11 +5.54484 +21 +-3.59865 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54484 +20 +-3.59865 +11 +5.54446 +21 +-3.6018 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50709 +20 +-3.60177 +11 +5.50749 +21 +-3.60498 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50749 +20 +-3.60498 +11 +5.50871 +21 +-3.60659 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50871 +20 +-3.60659 +11 +5.51037 +21 +-3.60718 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51037 +20 +-3.60718 +11 +5.51252 +21 +-3.60727 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51252 +20 +-3.60727 +11 +5.5344 +21 +-3.60727 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5344 +20 +-3.60727 +11 +5.53621 +21 +-3.60721 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53621 +20 +-3.60721 +11 +5.5389 +21 +-3.60609 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5389 +20 +-3.60609 +11 +5.53996 +21 +-3.60184 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53996 +20 +-3.60184 +11 +5.53996 +21 +-3.6018 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53996 +20 +-3.6018 +11 +5.53956 +21 +-3.59862 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53956 +20 +-3.59862 +11 +5.53834 +21 +-3.59696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53834 +20 +-3.59696 +11 +5.53668 +21 +-3.59643 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53668 +20 +-3.59643 +11 +5.53452 +21 +-3.59634 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53452 +20 +-3.59634 +11 +5.51259 +21 +-3.59634 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51259 +20 +-3.59634 +11 +5.5104 +21 +-3.59643 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5104 +20 +-3.59643 +11 +5.50877 +21 +-3.59696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50877 +20 +-3.59696 +11 +5.50751 +21 +-3.5986 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50751 +20 +-3.5986 +11 +5.50709 +21 +-3.60177 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50709 +20 +-3.58584 +11 +5.50751 +21 +-3.58904 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50751 +20 +-3.58904 +11 +5.50877 +21 +-3.59065 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50877 +20 +-3.59065 +11 +5.51043 +21 +-3.59124 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51043 +20 +-3.59124 +11 +5.51259 +21 +-3.59134 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51259 +20 +-3.59134 +11 +5.52352 +21 +-3.59134 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52352 +20 +-3.59134 +11 +5.52888 +21 +-3.59096 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52888 +20 +-3.59096 +11 +5.53312 +21 +-3.58984 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53312 +20 +-3.58984 +11 +5.53624 +21 +-3.58796 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53624 +20 +-3.58796 +11 +5.53913 +21 +-3.58418 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53913 +20 +-3.58418 +11 +5.54009 +21 +-3.57959 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54009 +20 +-3.57959 +11 +5.53887 +21 +-3.57521 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53887 +20 +-3.57521 +11 +5.53662 +21 +-3.57212 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53662 +20 +-3.57212 +11 +5.53465 +21 +-3.57046 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53465 +20 +-3.57046 +11 +5.53767 +21 +-3.56802 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53767 +20 +-3.56802 +11 +5.53948 +21 +-3.56485 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53948 +20 +-3.56485 +11 +5.54009 +21 +-3.56096 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54009 +20 +-3.56096 +11 +5.53898 +21 +-3.55713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53898 +20 +-3.55713 +11 +5.53565 +21 +-3.5539 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53565 +20 +-3.5539 +11 +5.5389 +21 +-3.55284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5389 +20 +-3.55284 +11 +5.54002 +21 +-3.54827 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54002 +20 +-3.54827 +11 +5.5396 +21 +-3.54541 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5396 +20 +-3.54541 +11 +5.53834 +21 +-3.54384 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53834 +20 +-3.54384 +11 +5.53674 +21 +-3.54324 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53674 +20 +-3.54324 +11 +5.53459 +21 +-3.54315 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53459 +20 +-3.54315 +11 +5.51259 +21 +-3.54315 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51259 +20 +-3.54315 +11 +5.5104 +21 +-3.54324 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5104 +20 +-3.54324 +11 +5.50877 +21 +-3.54377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50877 +20 +-3.54377 +11 +5.50751 +21 +-3.54541 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50751 +20 +-3.54541 +11 +5.50709 +21 +-3.54859 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50709 +20 +-3.54859 +11 +5.50749 +21 +-3.55177 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50749 +20 +-3.55177 +11 +5.50871 +21 +-3.55346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50871 +20 +-3.55346 +11 +5.51037 +21 +-3.55405 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51037 +20 +-3.55405 +11 +5.51252 +21 +-3.55415 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51252 +20 +-3.55415 +11 +5.52359 +21 +-3.55415 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52359 +20 +-3.55415 +11 +5.52766 +21 +-3.55509 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52766 +20 +-3.55509 +11 +5.52902 +21 +-3.5579 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52902 +20 +-3.5579 +11 +5.52766 +21 +-3.5608 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52766 +20 +-3.5608 +11 +5.52359 +21 +-3.56177 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52359 +20 +-3.56177 +11 +5.51265 +21 +-3.56177 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51265 +20 +-3.56177 +11 +5.51049 +21 +-3.56187 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51049 +20 +-3.56187 +11 +5.50884 +21 +-3.5624 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50884 +20 +-3.5624 +11 +5.50752 +21 +-3.56404 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50752 +20 +-3.56404 +11 +5.50709 +21 +-3.56721 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50709 +20 +-3.56721 +11 +5.50751 +21 +-3.57043 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50751 +20 +-3.57043 +11 +5.50877 +21 +-3.57209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50877 +20 +-3.57209 +11 +5.5104 +21 +-3.57268 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5104 +20 +-3.57268 +11 +5.51259 +21 +-3.57277 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51259 +20 +-3.57277 +11 +5.52352 +21 +-3.57277 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52352 +20 +-3.57277 +11 +5.52759 +21 +-3.57355 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52759 +20 +-3.57355 +11 +5.52902 +21 +-3.57652 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52902 +20 +-3.57652 +11 +5.52766 +21 +-3.57943 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52766 +20 +-3.57943 +11 +5.52359 +21 +-3.5804 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52359 +20 +-3.5804 +11 +5.51265 +21 +-3.5804 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51265 +20 +-3.5804 +11 +5.51049 +21 +-3.58049 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51049 +20 +-3.58049 +11 +5.50884 +21 +-3.58102 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50884 +20 +-3.58102 +11 +5.50752 +21 +-3.58266 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50752 +20 +-3.58266 +11 +5.50709 +21 +-3.58584 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50709 +20 +-3.50421 +11 +5.50749 +21 +-3.5074 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50749 +20 +-3.5074 +11 +5.50871 +21 +-3.50909 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50871 +20 +-3.50909 +11 +5.51037 +21 +-3.50968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51037 +20 +-3.50968 +11 +5.51252 +21 +-3.50977 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51252 +20 +-3.50977 +11 +5.52565 +21 +-3.50977 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52565 +20 +-3.50977 +11 +5.52852 +21 +-3.51124 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52852 +20 +-3.51124 +11 +5.52971 +21 +-3.5144 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52971 +20 +-3.5144 +11 +5.52921 +21 +-3.51712 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52921 +20 +-3.51712 +11 +5.52871 +21 +-3.51927 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52871 +20 +-3.51927 +11 +5.53109 +21 +-3.52271 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53109 +20 +-3.52271 +11 +5.53546 +21 +-3.5239 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53546 +20 +-3.5239 +11 +5.53837 +21 +-3.52312 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53837 +20 +-3.52312 +11 +5.53965 +21 +-3.52115 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53965 +20 +-3.52115 +11 +5.54018 +21 +-3.51896 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54018 +20 +-3.51896 +11 +5.54034 +21 +-3.51649 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54034 +20 +-3.51649 +11 +5.53927 +21 +-3.51309 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53927 +20 +-3.51309 +11 +5.53759 +21 +-3.51055 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53759 +20 +-3.51055 +11 +5.53652 +21 +-3.50965 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53652 +20 +-3.50965 +11 +5.53859 +21 +-3.50896 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53859 +20 +-3.50896 +11 +5.53966 +21 +-3.50732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53966 +20 +-3.50732 +11 +5.54002 +21 +-3.50427 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54002 +20 +-3.50427 +11 +5.5396 +21 +-3.50105 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5396 +20 +-3.50105 +11 +5.53834 +21 +-3.4994 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53834 +20 +-3.4994 +11 +5.53674 +21 +-3.49887 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53674 +20 +-3.49887 +11 +5.53459 +21 +-3.49877 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53459 +20 +-3.49877 +11 +5.51265 +21 +-3.49877 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51265 +20 +-3.49877 +11 +5.51084 +21 +-3.49877 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51084 +20 +-3.49877 +11 +5.50815 +21 +-3.4999 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50815 +20 +-3.4999 +11 +5.50709 +21 +-3.50421 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50652 +20 +-3.44424 +11 +5.50674 +21 +-3.44804 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50674 +20 +-3.44804 +11 +5.50739 +21 +-3.45138 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50739 +20 +-3.45138 +11 +5.50846 +21 +-3.45427 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50846 +20 +-3.45427 +11 +5.51187 +21 +-3.45768 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51187 +20 +-3.45768 +11 +5.51439 +21 +-3.45859 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51439 +20 +-3.45859 +11 +5.5174 +21 +-3.4589 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5174 +20 +-3.4589 +11 +5.52038 +21 +-3.45859 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52038 +20 +-3.45859 +11 +5.52281 +21 +-3.45768 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52281 +20 +-3.45768 +11 +5.52584 +21 +-3.45465 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52584 +20 +-3.45465 +11 +5.5274 +21 +-3.45071 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5274 +20 +-3.45071 +11 +5.52821 +21 +-3.44665 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52821 +20 +-3.44665 +11 +5.5291 +21 +-3.44346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5291 +20 +-3.44346 +11 +5.53065 +21 +-3.4424 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53065 +20 +-3.4424 +11 +5.53202 +21 +-3.44609 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53202 +20 +-3.44609 +11 +5.53109 +21 +-3.45049 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53109 +20 +-3.45049 +11 +5.53015 +21 +-3.45327 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53015 +20 +-3.45327 +11 +5.53234 +21 +-3.45609 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53234 +20 +-3.45609 +11 +5.53602 +21 +-3.45746 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53602 +20 +-3.45746 +11 +5.53852 +21 +-3.45527 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53852 +20 +-3.45527 +11 +5.54012 +21 +-3.45065 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54012 +20 +-3.45065 +11 +5.54065 +21 +-3.44615 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54065 +20 +-3.44615 +11 +5.54025 +21 +-3.44127 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54025 +20 +-3.44127 +11 +5.53907 +21 +-3.43747 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53907 +20 +-3.43747 +11 +5.53709 +21 +-3.43476 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53709 +20 +-3.43476 +11 +5.53433 +21 +-3.43313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53433 +20 +-3.43313 +11 +5.53077 +21 +-3.43259 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53077 +20 +-3.43259 +11 +5.52769 +21 +-3.43288 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52769 +20 +-3.43288 +11 +5.52506 +21 +-3.43377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52506 +20 +-3.43377 +11 +5.52152 +21 +-3.43677 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52152 +20 +-3.43677 +11 +5.5196 +21 +-3.44066 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5196 +20 +-3.44066 +11 +5.51859 +21 +-3.44459 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51859 +20 +-3.44459 +11 +5.51787 +21 +-3.44773 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51787 +20 +-3.44773 +11 +5.51684 +21 +-3.44877 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51684 +20 +-3.44877 +11 +5.51571 +21 +-3.44782 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51571 +20 +-3.44782 +11 +5.51534 +21 +-3.44496 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51534 +20 +-3.44496 +11 +5.51687 +21 +-3.44021 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51687 +20 +-3.44021 +11 +5.5184 +21 +-3.43605 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5184 +20 +-3.43605 +11 +5.51734 +21 +-3.43384 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51734 +20 +-3.43384 +11 +5.51445 +21 +-3.43205 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51445 +20 +-3.43205 +11 +5.5124 +21 +-3.43146 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5124 +20 +-3.43146 +11 +5.51002 +21 +-3.43265 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51002 +20 +-3.43265 +11 +5.50808 +21 +-3.43641 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50808 +20 +-3.43641 +11 +5.50691 +21 +-3.44027 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50691 +20 +-3.44027 +11 +5.50652 +21 +-3.44424 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50715 +20 +-3.4219 +11 +5.50757 +21 +-3.42512 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50757 +20 +-3.42512 +11 +5.50884 +21 +-3.42677 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50884 +20 +-3.42677 +11 +5.51043 +21 +-3.4273 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51043 +20 +-3.4273 +11 +5.51259 +21 +-3.4274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51259 +20 +-3.4274 +11 +5.52359 +21 +-3.4274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52359 +20 +-3.4274 +11 +5.52794 +21 +-3.42694 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52794 +20 +-3.42694 +11 +5.53182 +21 +-3.42555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53182 +20 +-3.42555 +11 +5.53524 +21 +-3.42324 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53524 +20 +-3.42324 +11 +5.5379 +21 +-3.42024 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5379 +20 +-3.42024 +11 +5.53949 +21 +-3.41677 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53949 +20 +-3.41677 +11 +5.54002 +21 +-3.41284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54002 +20 +-3.41284 +11 +5.53859 +21 +-3.40815 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53859 +20 +-3.40815 +11 +5.53727 +21 +-3.40646 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53727 +20 +-3.40646 +11 +5.53602 +21 +-3.40534 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53602 +20 +-3.40534 +11 +5.53859 +21 +-3.40471 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53859 +20 +-3.40471 +11 +5.53966 +21 +-3.4031 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53966 +20 +-3.4031 +11 +5.54002 +21 +-3.40002 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54002 +20 +-3.40002 +11 +5.53963 +21 +-3.39685 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53963 +20 +-3.39685 +11 +5.53846 +21 +-3.39521 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53846 +20 +-3.39521 +11 +5.53687 +21 +-3.39462 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53687 +20 +-3.39462 +11 +5.53477 +21 +-3.39452 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53477 +20 +-3.39452 +11 +5.51265 +21 +-3.39452 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51265 +20 +-3.39452 +11 +5.51049 +21 +-3.39462 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51049 +20 +-3.39462 +11 +5.50884 +21 +-3.39515 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50884 +20 +-3.39515 +11 +5.50757 +21 +-3.39679 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50757 +20 +-3.39679 +11 +5.50715 +21 +-3.39996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50715 +20 +-3.39996 +11 +5.50757 +21 +-3.40316 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50757 +20 +-3.40316 +11 +5.50884 +21 +-3.40477 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50884 +20 +-3.40477 +11 +5.51043 +21 +-3.40537 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51043 +20 +-3.40537 +11 +5.51259 +21 +-3.40546 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51259 +20 +-3.40546 +11 +5.52365 +21 +-3.40546 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52365 +20 +-3.40546 +11 +5.52759 +21 +-3.40699 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52759 +20 +-3.40699 +11 +5.52909 +21 +-3.41099 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52909 +20 +-3.41099 +11 +5.52765 +21 +-3.41493 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52765 +20 +-3.41493 +11 +5.52365 +21 +-3.4164 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52365 +20 +-3.4164 +11 +5.51265 +21 +-3.4164 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51265 +20 +-3.4164 +11 +5.50946 +21 +-3.41677 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50946 +20 +-3.41677 +11 +5.50773 +21 +-3.4184 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50773 +20 +-3.4184 +11 +5.50715 +21 +-3.4219 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50715 +20 +-3.31084 +11 +5.50757 +21 +-3.31405 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50757 +20 +-3.31405 +11 +5.50884 +21 +-3.31571 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50884 +20 +-3.31571 +11 +5.51043 +21 +-3.31624 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51043 +20 +-3.31624 +11 +5.51259 +21 +-3.31634 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51259 +20 +-3.31634 +11 +5.52359 +21 +-3.31634 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52359 +20 +-3.31634 +11 +5.52794 +21 +-3.31587 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52794 +20 +-3.31587 +11 +5.53182 +21 +-3.31449 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53182 +20 +-3.31449 +11 +5.53524 +21 +-3.31218 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53524 +20 +-3.31218 +11 +5.5379 +21 +-3.30918 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5379 +20 +-3.30918 +11 +5.53949 +21 +-3.30571 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53949 +20 +-3.30571 +11 +5.54002 +21 +-3.30177 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54002 +20 +-3.30177 +11 +5.53859 +21 +-3.29709 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53859 +20 +-3.29709 +11 +5.53727 +21 +-3.2954 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53727 +20 +-3.2954 +11 +5.53602 +21 +-3.29427 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53602 +20 +-3.29427 +11 +5.53859 +21 +-3.29365 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53859 +20 +-3.29365 +11 +5.53966 +21 +-3.29204 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53966 +20 +-3.29204 +11 +5.54002 +21 +-3.28896 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54002 +20 +-3.28896 +11 +5.53963 +21 +-3.28579 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53963 +20 +-3.28579 +11 +5.53846 +21 +-3.28415 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53846 +20 +-3.28415 +11 +5.53687 +21 +-3.28355 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53687 +20 +-3.28355 +11 +5.53477 +21 +-3.28346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53477 +20 +-3.28346 +11 +5.51265 +21 +-3.28346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51265 +20 +-3.28346 +11 +5.51049 +21 +-3.28355 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51049 +20 +-3.28355 +11 +5.50884 +21 +-3.28409 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50884 +20 +-3.28409 +11 +5.50757 +21 +-3.28573 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50757 +20 +-3.28573 +11 +5.50715 +21 +-3.2889 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50715 +20 +-3.2889 +11 +5.50757 +21 +-3.2921 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50757 +20 +-3.2921 +11 +5.50884 +21 +-3.29371 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50884 +20 +-3.29371 +11 +5.51043 +21 +-3.2943 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51043 +20 +-3.2943 +11 +5.51259 +21 +-3.2944 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51259 +20 +-3.2944 +11 +5.52365 +21 +-3.2944 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52365 +20 +-3.2944 +11 +5.52759 +21 +-3.29593 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52759 +20 +-3.29593 +11 +5.52909 +21 +-3.29993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52909 +20 +-3.29993 +11 +5.52765 +21 +-3.30387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52765 +20 +-3.30387 +11 +5.52365 +21 +-3.30534 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52365 +20 +-3.30534 +11 +5.51265 +21 +-3.30534 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51265 +20 +-3.30534 +11 +5.50946 +21 +-3.30571 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50946 +20 +-3.30571 +11 +5.50773 +21 +-3.30734 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50773 +20 +-3.30734 +11 +5.50715 +21 +-3.31084 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50646 +20 +-3.22649 +11 +5.50671 +21 +-3.22952 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50671 +20 +-3.22952 +11 +5.50746 +21 +-3.23265 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50746 +20 +-3.23265 +11 +5.50909 +21 +-3.23687 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50909 +20 +-3.23687 +11 +5.5104 +21 +-3.23902 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5104 +20 +-3.23902 +11 +5.51196 +21 +-3.24099 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51196 +20 +-3.24099 +11 +5.51415 +21 +-3.24184 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51415 +20 +-3.24184 +11 +5.51765 +21 +-3.24046 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51765 +20 +-3.24046 +11 +5.52027 +21 +-3.23829 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52027 +20 +-3.23829 +11 +5.52115 +21 +-3.23627 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52115 +20 +-3.23627 +11 +5.5199 +21 +-3.23327 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5199 +20 +-3.23327 +11 +5.51909 +21 +-3.23215 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51909 +20 +-3.23215 +11 +5.51809 +21 +-3.22968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51809 +20 +-3.22968 +11 +5.51759 +21 +-3.22602 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51759 +20 +-3.22602 +11 +5.51827 +21 +-3.22198 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51827 +20 +-3.22198 +11 +5.52034 +21 +-3.21809 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52034 +20 +-3.21809 +11 +5.52427 +21 +-3.2149 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52427 +20 +-3.2149 +11 +5.52694 +21 +-3.21396 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52694 +20 +-3.21396 +11 +5.52993 +21 +-3.21365 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52993 +20 +-3.21365 +11 +5.53292 +21 +-3.21396 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53292 +20 +-3.21396 +11 +5.53559 +21 +-3.2149 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53559 +20 +-3.2149 +11 +5.53946 +21 +-3.21802 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53946 +20 +-3.21802 +11 +5.54157 +21 +-3.22199 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54157 +20 +-3.22199 +11 +5.54227 +21 +-3.22602 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54227 +20 +-3.22602 +11 +5.54174 +21 +-3.22996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54174 +20 +-3.22996 +11 +5.54015 +21 +-3.23302 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54015 +20 +-3.23302 +11 +5.53877 +21 +-3.23621 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53877 +20 +-3.23621 +11 +5.53962 +21 +-3.23827 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53962 +20 +-3.23827 +11 +5.54215 +21 +-3.24059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54215 +20 +-3.24059 +11 +5.54562 +21 +-3.2419 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54562 +20 +-3.2419 +11 +5.54859 +21 +-3.24027 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54859 +20 +-3.24027 +11 +5.54971 +21 +-3.23852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54971 +20 +-3.23852 +11 +5.55059 +21 +-3.23702 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55059 +20 +-3.23702 +11 +5.55243 +21 +-3.23243 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55243 +20 +-3.23243 +11 +5.55311 +21 +-3.22942 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55311 +20 +-3.22942 +11 +5.55334 +21 +-3.22646 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55334 +20 +-3.22646 +11 +5.55296 +21 +-3.22234 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55296 +20 +-3.22234 +11 +5.55184 +21 +-3.21824 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55184 +20 +-3.21824 +11 +5.54996 +21 +-3.21415 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54996 +20 +-3.21415 +11 +5.548 +21 +-3.21108 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.548 +20 +-3.21108 +11 +5.54562 +21 +-3.20837 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54562 +20 +-3.20837 +11 +5.54268 +21 +-3.20606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54268 +20 +-3.20606 +11 +5.53906 +21 +-3.20421 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53906 +20 +-3.20421 +11 +5.53486 +21 +-3.20299 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53486 +20 +-3.20299 +11 +5.53021 +21 +-3.20259 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53021 +20 +-3.20259 +11 +5.52552 +21 +-3.203 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52552 +20 +-3.203 +11 +5.52118 +21 +-3.20424 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52118 +20 +-3.20424 +11 +5.5174 +21 +-3.20613 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5174 +20 +-3.20613 +11 +5.51437 +21 +-3.20846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51437 +20 +-3.20846 +11 +5.51191 +21 +-3.21119 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51191 +20 +-3.21119 +11 +5.50987 +21 +-3.21424 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50987 +20 +-3.21424 +11 +5.50829 +21 +-3.21741 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50829 +20 +-3.21741 +11 +5.50724 +21 +-3.22049 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50724 +20 +-3.22049 +11 +5.50666 +21 +-3.22351 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50666 +20 +-3.22351 +11 +5.50646 +21 +-3.22649 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60637 +20 +-3.96722 +11 +6.60651 +21 +-3.9672 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60651 +20 +-3.9672 +11 +6.60661 +21 +-3.96726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60661 +20 +-3.96726 +11 +6.60694 +21 +-3.96732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60694 +20 +-3.96732 +11 +6.60755 +21 +-3.96783 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60755 +20 +-3.96783 +11 +6.60823 +21 +-3.96824 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60823 +20 +-3.96824 +11 +6.60831 +21 +-3.96847 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60831 +20 +-3.96847 +11 +6.60849 +21 +-3.96862 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60849 +20 +-3.96862 +11 +6.60863 +21 +-3.9694 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60863 +20 +-3.9694 +11 +6.60889 +21 +-3.97015 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60889 +20 +-3.97015 +11 +6.6088 +21 +-3.97037 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6088 +20 +-3.97037 +11 +6.60884 +21 +-3.97061 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60884 +20 +-3.97061 +11 +6.60844 +21 +-3.9713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60844 +20 +-3.9713 +11 +6.60816 +21 +-3.97204 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60816 +20 +-3.97204 +11 +6.5992 +21 +-3.98227 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5992 +20 +-3.98227 +11 +6.59944 +21 +-3.98232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59944 +20 +-3.98232 +11 +6.59958 +21 +-3.98243 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59958 +20 +-3.98243 +11 +6.59976 +21 +-3.98245 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59976 +20 +-3.98245 +11 +6.6035 +21 +-3.98433 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6035 +20 +-3.98433 +11 +6.60421 +21 +-3.98485 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60421 +20 +-3.98485 +11 +6.60427 +21 +-3.98488 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60427 +20 +-3.98488 +11 +6.60615 +21 +-3.98675 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60615 +20 +-3.98675 +11 +6.60665 +21 +-3.98748 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60665 +20 +-3.98748 +11 +6.6067 +21 +-3.98752 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6067 +20 +-3.98752 +11 +6.60857 +21 +-3.99127 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60857 +20 +-3.99127 +11 +6.60887 +21 +-3.99225 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60887 +20 +-3.99225 +11 +6.60883 +21 +-3.99242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60883 +20 +-3.99242 +11 +6.60889 +21 +-3.99259 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60889 +20 +-3.99259 +11 +6.60889 +21 +-4.00196 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60889 +20 +-4.00196 +11 +6.60871 +21 +-4.00297 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60871 +20 +-4.00297 +11 +6.60859 +21 +-4.00311 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60859 +20 +-4.00311 +11 +6.60857 +21 +-4.00329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60857 +20 +-4.00329 +11 +6.6067 +21 +-4.00703 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6067 +20 +-4.00703 +11 +6.60617 +21 +-4.00774 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60617 +20 +-4.00774 +11 +6.60615 +21 +-4.0078 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60615 +20 +-4.0078 +11 +6.60427 +21 +-4.00968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60427 +20 +-4.00968 +11 +6.60355 +21 +-4.01018 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60355 +20 +-4.01018 +11 +6.6035 +21 +-4.01023 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6035 +20 +-4.01023 +11 +6.59976 +21 +-4.0121 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59976 +20 +-4.0121 +11 +6.59877 +21 +-4.0124 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59877 +20 +-4.0124 +11 +6.5986 +21 +-4.01236 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5986 +20 +-4.01236 +11 +6.59843 +21 +-4.01242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59843 +20 +-4.01242 +11 +6.58719 +21 +-4.01242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58719 +20 +-4.01242 +11 +6.58618 +21 +-4.01224 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58618 +20 +-4.01224 +11 +6.58604 +21 +-4.01212 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58604 +20 +-4.01212 +11 +6.58587 +21 +-4.0121 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58587 +20 +-4.0121 +11 +6.58212 +21 +-4.01023 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58212 +20 +-4.01023 +11 +6.58141 +21 +-4.0097 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58141 +20 +-4.0097 +11 +6.58135 +21 +-4.00968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58135 +20 +-4.00968 +11 +6.57947 +21 +-4.0078 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57947 +20 +-4.0078 +11 +6.57889 +21 +-4.00696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57889 +20 +-4.00696 +11 +6.57871 +21 +-4.00495 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57871 +20 +-4.00495 +11 +6.57987 +21 +-4.0033 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57987 +20 +-4.0033 +11 +6.58182 +21 +-4.00277 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58182 +20 +-4.00277 +11 +6.58365 +21 +-4.00363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58365 +20 +-4.00363 +11 +6.58519 +21 +-4.00516 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58519 +20 +-4.00516 +11 +6.58788 +21 +-4.00651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58788 +20 +-4.00651 +11 +6.59774 +21 +-4.00651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59774 +20 +-4.00651 +11 +6.60044 +21 +-4.00516 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60044 +20 +-4.00516 +11 +6.60163 +21 +-4.00397 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60163 +20 +-4.00397 +11 +6.60298 +21 +-4.00127 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60298 +20 +-4.00127 +11 +6.60298 +21 +-3.99329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60298 +20 +-3.99329 +11 +6.60163 +21 +-3.99059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60163 +20 +-3.99059 +11 +6.60044 +21 +-3.98939 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60044 +20 +-3.98939 +11 +6.59774 +21 +-3.98804 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59774 +20 +-3.98804 +11 +6.59281 +21 +-3.98804 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59281 +20 +-3.98804 +11 +6.59237 +21 +-3.98797 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59237 +20 +-3.98797 +11 +6.59224 +21 +-3.98799 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59224 +20 +-3.98799 +11 +6.59213 +21 +-3.98793 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59213 +20 +-3.98793 +11 +6.5918 +21 +-3.98787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5918 +20 +-3.98787 +11 +6.59119 +21 +-3.98735 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59119 +20 +-3.98735 +11 +6.59051 +21 +-3.98694 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59051 +20 +-3.98694 +11 +6.59043 +21 +-3.98672 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59043 +20 +-3.98672 +11 +6.59025 +21 +-3.98657 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59025 +20 +-3.98657 +11 +6.59011 +21 +-3.98578 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59011 +20 +-3.98578 +11 +6.58986 +21 +-3.98503 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58986 +20 +-3.98503 +11 +6.58994 +21 +-3.98481 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58994 +20 +-3.98481 +11 +6.5899 +21 +-3.98458 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5899 +20 +-3.98458 +11 +6.5903 +21 +-3.98389 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5903 +20 +-3.98389 +11 +6.59059 +21 +-3.98315 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59059 +20 +-3.98315 +11 +6.59943 +21 +-3.97305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59943 +20 +-3.97305 +11 +6.58156 +21 +-3.97305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58156 +20 +-3.97305 +11 +6.58055 +21 +-3.97287 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58055 +20 +-3.97287 +11 +6.579 +21 +-3.97157 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.579 +20 +-3.97157 +11 +6.57865 +21 +-3.96958 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57865 +20 +-3.96958 +11 +6.57966 +21 +-3.96783 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57966 +20 +-3.96783 +11 +6.58156 +21 +-3.96714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58156 +20 +-3.96714 +11 +6.60593 +21 +-3.96714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60593 +20 +-3.96714 +11 +6.60637 +21 +-3.96722 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56181 +20 +-3.96729 +11 +6.56187 +21 +-3.96729 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56187 +20 +-3.96729 +11 +6.5675 +21 +-3.96917 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5675 +20 +-3.96917 +11 +6.5684 +21 +-3.96966 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5684 +20 +-3.96966 +11 +6.56849 +21 +-3.96981 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56849 +20 +-3.96981 +11 +6.56865 +21 +-3.96988 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56865 +20 +-3.96988 +11 +6.57053 +21 +-3.97176 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57053 +20 +-3.97176 +11 +6.57111 +21 +-3.9726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57111 +20 +-3.9726 +11 +6.57129 +21 +-3.97461 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57129 +20 +-3.97461 +11 +6.57013 +21 +-3.97626 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57013 +20 +-3.97626 +11 +6.56818 +21 +-3.97678 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56818 +20 +-3.97678 +11 +6.56635 +21 +-3.97593 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56635 +20 +-3.97593 +11 +6.56497 +21 +-3.97455 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56497 +20 +-3.97455 +11 +6.56046 +21 +-3.97305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56046 +20 +-3.97305 +11 +6.55767 +21 +-3.97305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55767 +20 +-3.97305 +11 +6.55316 +21 +-3.97455 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55316 +20 +-3.97455 +11 +6.55024 +21 +-3.97747 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55024 +20 +-3.97747 +11 +6.54873 +21 +-3.9805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54873 +20 +-3.9805 +11 +6.54702 +21 +-3.98733 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54702 +20 +-3.98733 +11 +6.54702 +21 +-3.99223 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54702 +20 +-3.99223 +11 +6.54873 +21 +-3.99906 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54873 +20 +-3.99906 +11 +6.55024 +21 +-4.00209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55024 +20 +-4.00209 +11 +6.55316 +21 +-4.00501 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55316 +20 +-4.00501 +11 +6.55767 +21 +-4.00651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55767 +20 +-4.00651 +11 +6.56046 +21 +-4.00651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56046 +20 +-4.00651 +11 +6.56497 +21 +-4.00501 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56497 +20 +-4.00501 +11 +6.56635 +21 +-4.00363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56635 +20 +-4.00363 +11 +6.56719 +21 +-4.00304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56719 +20 +-4.00304 +11 +6.5692 +21 +-4.00286 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5692 +20 +-4.00286 +11 +6.57086 +21 +-4.00402 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57086 +20 +-4.00402 +11 +6.57138 +21 +-4.00597 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57138 +20 +-4.00597 +11 +6.57053 +21 +-4.0078 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57053 +20 +-4.0078 +11 +6.56865 +21 +-4.00968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56865 +20 +-4.00968 +11 +6.56781 +21 +-4.01027 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56781 +20 +-4.01027 +11 +6.56764 +21 +-4.01028 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56764 +20 +-4.01028 +11 +6.5675 +21 +-4.01039 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5675 +20 +-4.01039 +11 +6.56187 +21 +-4.01227 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56187 +20 +-4.01227 +11 +6.561 +21 +-4.01239 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.561 +20 +-4.01239 +11 +6.56094 +21 +-4.01242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56094 +20 +-4.01242 +11 +6.55719 +21 +-4.01242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55719 +20 +-4.01242 +11 +6.55632 +21 +-4.01226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55632 +20 +-4.01226 +11 +6.55626 +21 +-4.01227 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55626 +20 +-4.01227 +11 +6.55063 +21 +-4.01039 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55063 +20 +-4.01039 +11 +6.54973 +21 +-4.0099 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54973 +20 +-4.0099 +11 +6.54964 +21 +-4.00975 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54964 +20 +-4.00975 +11 +6.54948 +21 +-4.00968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54948 +20 +-4.00968 +11 +6.54573 +21 +-4.00593 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54573 +20 +-4.00593 +11 +6.54522 +21 +-4.0052 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54522 +20 +-4.0052 +11 +6.54517 +21 +-4.00516 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54517 +20 +-4.00516 +11 +6.5433 +21 +-4.00141 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5433 +20 +-4.00141 +11 +6.54315 +21 +-4.00092 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54315 +20 +-4.00092 +11 +6.54308 +21 +-4.00081 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54308 +20 +-4.00081 +11 +6.5412 +21 +-3.99331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5412 +20 +-3.99331 +11 +6.54116 +21 +-3.99272 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54116 +20 +-3.99272 +11 +6.54111 +21 +-3.99259 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54111 +20 +-3.99259 +11 +6.54111 +21 +-3.98697 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54111 +20 +-3.98697 +11 +6.54122 +21 +-3.98639 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54122 +20 +-3.98639 +11 +6.5412 +21 +-3.98625 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5412 +20 +-3.98625 +11 +6.54308 +21 +-3.97875 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54308 +20 +-3.97875 +11 +6.54328 +21 +-3.97829 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54328 +20 +-3.97829 +11 +6.5433 +21 +-3.97815 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5433 +20 +-3.97815 +11 +6.54517 +21 +-3.9744 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54517 +20 +-3.9744 +11 +6.5457 +21 +-3.97369 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5457 +20 +-3.97369 +11 +6.54573 +21 +-3.97363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54573 +20 +-3.97363 +11 +6.54948 +21 +-3.96988 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54948 +20 +-3.96988 +11 +6.55032 +21 +-3.96929 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55032 +20 +-3.96929 +11 +6.55049 +21 +-3.96928 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55049 +20 +-3.96928 +11 +6.55063 +21 +-3.96917 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55063 +20 +-3.96917 +11 +6.55626 +21 +-3.96729 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55626 +20 +-3.96729 +11 +6.55713 +21 +-3.96716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55713 +20 +-3.96716 +11 +6.55719 +21 +-3.96714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55719 +20 +-3.96714 +11 +6.56094 +21 +-3.96714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56094 +20 +-3.96714 +11 +6.56181 +21 +-3.96729 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40982 +20 +-3.82668 +11 +6.40982 +21 +-3.82668 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40982 +20 +-3.82668 +11 +6.45173 +21 +-3.86858 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45173 +20 +-3.86858 +11 +6.45173 +21 +-3.86858 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45173 +20 +-3.86858 +11 +6.45242 +21 +-3.87025 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45242 +20 +-3.87025 +11 +6.45242 +21 +-3.94055 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45242 +20 +-3.94055 +11 +6.45173 +21 +-3.94222 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45173 +20 +-3.94222 +11 +6.45006 +21 +-3.94291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45006 +20 +-3.94291 +11 +6.44839 +21 +-3.94222 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44839 +20 +-3.94222 +11 +6.4477 +21 +-3.94055 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4477 +20 +-3.94055 +11 +6.4477 +21 +-3.87123 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4477 +20 +-3.87123 +11 +6.40717 +21 +-3.83071 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40717 +20 +-3.83071 +11 +6.10911 +21 +-3.83071 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10911 +20 +-3.83071 +11 +6.10911 +21 +-3.94055 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10911 +20 +-3.94055 +11 +6.10842 +21 +-3.94222 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10842 +20 +-3.94222 +11 +6.10675 +21 +-3.94291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10675 +20 +-3.94291 +11 +6.10508 +21 +-3.94222 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10508 +20 +-3.94222 +11 +6.10439 +21 +-3.94055 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10439 +20 +-3.94055 +11 +6.10439 +21 +-3.82835 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10439 +20 +-3.82835 +11 +6.10508 +21 +-3.82668 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10508 +20 +-3.82668 +11 +6.10675 +21 +-3.82598 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10675 +20 +-3.82598 +11 +6.40815 +21 +-3.82598 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40815 +20 +-3.82598 +11 +6.40982 +21 +-3.82668 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39003 +20 +-3.73222 +11 +6.3902 +21 +-3.73219 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3902 +20 +-3.73219 +11 +6.39094 +21 +-3.73261 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39094 +20 +-3.73261 +11 +6.39172 +21 +-3.73296 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39172 +20 +-3.73296 +11 +6.3918 +21 +-3.73311 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3918 +20 +-3.73311 +11 +6.39195 +21 +-3.7332 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39195 +20 +-3.7332 +11 +6.39224 +21 +-3.734 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39224 +20 +-3.734 +11 +6.39262 +21 +-3.73477 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39262 +20 +-3.73477 +11 +6.39258 +21 +-3.73493 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39258 +20 +-3.73493 +11 +6.39264 +21 +-3.73509 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39264 +20 +-3.73509 +11 +6.39264 +21 +-3.77151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39264 +20 +-3.77151 +11 +6.40093 +21 +-3.77151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40093 +20 +-3.77151 +11 +6.40194 +21 +-3.77169 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40194 +20 +-3.77169 +11 +6.40349 +21 +-3.77299 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40349 +20 +-3.77299 +11 +6.40384 +21 +-3.77498 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40384 +20 +-3.77498 +11 +6.40283 +21 +-3.77673 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40283 +20 +-3.77673 +11 +6.40093 +21 +-3.77742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40093 +20 +-3.77742 +11 +6.37844 +21 +-3.77742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37844 +20 +-3.77742 +11 +6.37743 +21 +-3.77724 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37743 +20 +-3.77724 +11 +6.37588 +21 +-3.77594 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37588 +20 +-3.77594 +11 +6.37553 +21 +-3.77395 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37553 +20 +-3.77395 +11 +6.37654 +21 +-3.7722 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37654 +20 +-3.7722 +11 +6.37844 +21 +-3.77151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37844 +20 +-3.77151 +11 +6.38673 +21 +-3.77151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38673 +20 +-3.77151 +11 +6.38673 +21 +-3.7441 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38673 +20 +-3.7441 +11 +6.38427 +21 +-3.74656 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38427 +20 +-3.74656 +11 +6.38355 +21 +-3.74706 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38355 +20 +-3.74706 +11 +6.38351 +21 +-3.74711 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38351 +20 +-3.74711 +11 +6.37976 +21 +-3.74898 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37976 +20 +-3.74898 +11 +6.37877 +21 +-3.74928 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37877 +20 +-3.74928 +11 +6.37681 +21 +-3.74881 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37681 +20 +-3.74881 +11 +6.37561 +21 +-3.74718 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37561 +20 +-3.74718 +11 +6.37573 +21 +-3.74517 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37573 +20 +-3.74517 +11 +6.37712 +21 +-3.7437 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37712 +20 +-3.7437 +11 +6.38044 +21 +-3.74204 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38044 +20 +-3.74204 +11 +6.38364 +21 +-3.73884 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38364 +20 +-3.73884 +11 +6.38723 +21 +-3.73346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38723 +20 +-3.73346 +11 +6.38794 +21 +-3.73271 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38794 +20 +-3.73271 +11 +6.3881 +21 +-3.73267 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3881 +20 +-3.73267 +11 +6.38821 +21 +-3.73254 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38821 +20 +-3.73254 +11 +6.38905 +21 +-3.73239 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38905 +20 +-3.73239 +11 +6.38988 +21 +-3.73215 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38988 +20 +-3.73215 +11 +6.39003 +21 +-3.73222 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35118 +20 +-3.73229 +11 +6.35125 +21 +-3.73229 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35125 +20 +-3.73229 +11 +6.35687 +21 +-3.73417 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35687 +20 +-3.73417 +11 +6.35777 +21 +-3.73466 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35777 +20 +-3.73466 +11 +6.35787 +21 +-3.73481 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35787 +20 +-3.73481 +11 +6.35803 +21 +-3.73488 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35803 +20 +-3.73488 +11 +6.36178 +21 +-3.73863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36178 +20 +-3.73863 +11 +6.36228 +21 +-3.73935 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36228 +20 +-3.73935 +11 +6.36233 +21 +-3.7394 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36233 +20 +-3.7394 +11 +6.3642 +21 +-3.74315 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3642 +20 +-3.74315 +11 +6.36435 +21 +-3.74364 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36435 +20 +-3.74364 +11 +6.36443 +21 +-3.74375 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36443 +20 +-3.74375 +11 +6.3663 +21 +-3.75125 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3663 +20 +-3.75125 +11 +6.36634 +21 +-3.75184 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36634 +20 +-3.75184 +11 +6.36639 +21 +-3.75197 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36639 +20 +-3.75197 +11 +6.36639 +21 +-3.75759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36639 +20 +-3.75759 +11 +6.36629 +21 +-3.75817 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36629 +20 +-3.75817 +11 +6.3663 +21 +-3.75831 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3663 +20 +-3.75831 +11 +6.36443 +21 +-3.76581 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36443 +20 +-3.76581 +11 +6.36422 +21 +-3.76627 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36422 +20 +-3.76627 +11 +6.3642 +21 +-3.76641 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3642 +20 +-3.76641 +11 +6.36233 +21 +-3.77016 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36233 +20 +-3.77016 +11 +6.3618 +21 +-3.77087 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3618 +20 +-3.77087 +11 +6.36178 +21 +-3.77093 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36178 +20 +-3.77093 +11 +6.35803 +21 +-3.77468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35803 +20 +-3.77468 +11 +6.35719 +21 +-3.77527 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35719 +20 +-3.77527 +11 +6.35701 +21 +-3.77528 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35701 +20 +-3.77528 +11 +6.35687 +21 +-3.77539 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35687 +20 +-3.77539 +11 +6.35125 +21 +-3.77726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35125 +20 +-3.77726 +11 +6.35038 +21 +-3.77739 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35038 +20 +-3.77739 +11 +6.35031 +21 +-3.77742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35031 +20 +-3.77742 +11 +6.34094 +21 +-3.77742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34094 +20 +-3.77742 +11 +6.34056 +21 +-3.77735 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34056 +20 +-3.77735 +11 +6.34043 +21 +-3.77737 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34043 +20 +-3.77737 +11 +6.34031 +21 +-3.77731 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34031 +20 +-3.77731 +11 +6.33993 +21 +-3.77724 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33993 +20 +-3.77724 +11 +6.33934 +21 +-3.77675 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33934 +20 +-3.77675 +11 +6.33868 +21 +-3.77636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33868 +20 +-3.77636 +11 +6.33859 +21 +-3.77611 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33859 +20 +-3.77611 +11 +6.33838 +21 +-3.77594 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33838 +20 +-3.77594 +11 +6.33825 +21 +-3.77518 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33825 +20 +-3.77518 +11 +6.33799 +21 +-3.77446 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33799 +20 +-3.77446 +11 +6.33799 +21 +-3.73509 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33799 +20 +-3.73509 +11 +6.33806 +21 +-3.73471 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33806 +20 +-3.73471 +11 +6.33803 +21 +-3.73458 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33803 +20 +-3.73458 +11 +6.3381 +21 +-3.73447 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3381 +20 +-3.73447 +11 +6.33817 +21 +-3.73408 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33817 +20 +-3.73408 +11 +6.33866 +21 +-3.7335 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33866 +20 +-3.7335 +11 +6.33904 +21 +-3.73283 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33904 +20 +-3.73283 +11 +6.33929 +21 +-3.73274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33929 +20 +-3.73274 +11 +6.33946 +21 +-3.73254 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33946 +20 +-3.73254 +11 +6.34022 +21 +-3.7324 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34022 +20 +-3.7324 +11 +6.34094 +21 +-3.73214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34094 +20 +-3.73214 +11 +6.35031 +21 +-3.73214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35031 +20 +-3.73214 +11 +6.35118 +21 +-3.73229 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34389 +20 +-3.77151 +11 +6.34984 +21 +-3.77151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34984 +20 +-3.77151 +11 +6.35434 +21 +-3.77001 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35434 +20 +-3.77001 +11 +6.35726 +21 +-3.76709 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35726 +20 +-3.76709 +11 +6.35878 +21 +-3.76406 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35878 +20 +-3.76406 +11 +6.36049 +21 +-3.75723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36049 +20 +-3.75723 +11 +6.36049 +21 +-3.75233 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36049 +20 +-3.75233 +11 +6.35878 +21 +-3.7455 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35878 +20 +-3.7455 +11 +6.35726 +21 +-3.74247 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35726 +20 +-3.74247 +11 +6.35434 +21 +-3.73955 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35434 +20 +-3.73955 +11 +6.34984 +21 +-3.73805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34984 +20 +-3.73805 +11 +6.34389 +21 +-3.73805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34389 +20 +-3.73805 +11 +6.34389 +21 +-3.77151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90549 +20 +-3.72286 +11 +5.90618 +21 +-3.72453 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90618 +20 +-3.72453 +11 +5.90618 +21 +-3.74185 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90618 +20 +-3.74185 +11 +5.9235 +21 +-3.74185 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9235 +20 +-3.74185 +11 +5.92517 +21 +-3.74254 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92517 +20 +-3.74254 +11 +5.92587 +21 +-3.74421 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92587 +20 +-3.74421 +11 +5.92517 +21 +-3.74588 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92517 +20 +-3.74588 +11 +5.9235 +21 +-3.74657 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9235 +20 +-3.74657 +11 +5.90618 +21 +-3.74657 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90618 +20 +-3.74657 +11 +5.90618 +21 +-3.7639 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90618 +20 +-3.7639 +11 +5.90549 +21 +-3.76557 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90549 +20 +-3.76557 +11 +5.90382 +21 +-3.76626 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90382 +20 +-3.76626 +11 +5.90215 +21 +-3.76557 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90215 +20 +-3.76557 +11 +5.90146 +21 +-3.7639 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90146 +20 +-3.7639 +11 +5.90146 +21 +-3.74657 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90146 +20 +-3.74657 +11 +5.88413 +21 +-3.74657 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88413 +20 +-3.74657 +11 +5.88246 +21 +-3.74588 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88246 +20 +-3.74588 +11 +5.88177 +21 +-3.74421 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88177 +20 +-3.74421 +11 +5.88246 +21 +-3.74254 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88246 +20 +-3.74254 +11 +5.88413 +21 +-3.74185 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88413 +20 +-3.74185 +11 +5.90146 +21 +-3.74185 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90146 +20 +-3.74185 +11 +5.90146 +21 +-3.72453 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90146 +20 +-3.72453 +11 +5.90215 +21 +-3.72286 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90215 +20 +-3.72286 +11 +5.90382 +21 +-3.72217 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90382 +20 +-3.72217 +11 +5.90549 +21 +-3.72286 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14832 +20 +-3.54778 +11 +6.14902 +21 +-3.54945 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14902 +20 +-3.54945 +11 +6.14902 +21 +-3.66165 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14902 +20 +-3.66165 +11 +6.14832 +21 +-3.66332 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14832 +20 +-3.66332 +11 +6.14665 +21 +-3.66402 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14665 +20 +-3.66402 +11 +5.84525 +21 +-3.66402 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84525 +20 +-3.66402 +11 +5.84407 +21 +-3.66353 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84407 +20 +-3.66353 +11 +5.84358 +21 +-3.66332 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84358 +20 +-3.66332 +11 +5.80168 +21 +-3.62142 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80168 +20 +-3.62142 +11 +5.80147 +21 +-3.62093 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80147 +20 +-3.62093 +11 +5.80098 +21 +-3.61975 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80098 +20 +-3.61975 +11 +5.80098 +21 +-3.54945 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80098 +20 +-3.54945 +11 +5.80168 +21 +-3.54778 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80168 +20 +-3.54778 +11 +5.80335 +21 +-3.54709 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80335 +20 +-3.54709 +11 +5.80502 +21 +-3.54778 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80502 +20 +-3.54778 +11 +5.80571 +21 +-3.54945 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80571 +20 +-3.54945 +11 +5.80571 +21 +-3.61877 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80571 +20 +-3.61877 +11 +5.84623 +21 +-3.65929 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84623 +20 +-3.65929 +11 +6.14429 +21 +-3.65929 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14429 +20 +-3.65929 +11 +6.14429 +21 +-3.54945 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14429 +20 +-3.54945 +11 +6.14498 +21 +-3.54778 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14498 +20 +-3.54778 +11 +6.14665 +21 +-3.54709 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14665 +20 +-3.54709 +11 +6.14832 +21 +-3.54778 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44681 +20 +-3.61229 +11 +6.44687 +21 +-3.61229 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44687 +20 +-3.61229 +11 +6.4525 +21 +-3.61417 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4525 +20 +-3.61417 +11 +6.4534 +21 +-3.61466 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4534 +20 +-3.61466 +11 +6.45349 +21 +-3.61481 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45349 +20 +-3.61481 +11 +6.45365 +21 +-3.61488 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45365 +20 +-3.61488 +11 +6.45553 +21 +-3.61676 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45553 +20 +-3.61676 +11 +6.45611 +21 +-3.6176 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45611 +20 +-3.6176 +11 +6.45629 +21 +-3.61961 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45629 +20 +-3.61961 +11 +6.45513 +21 +-3.62126 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45513 +20 +-3.62126 +11 +6.45318 +21 +-3.62178 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45318 +20 +-3.62178 +11 +6.45135 +21 +-3.62093 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45135 +20 +-3.62093 +11 +6.44997 +21 +-3.61955 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44997 +20 +-3.61955 +11 +6.44546 +21 +-3.61805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44546 +20 +-3.61805 +11 +6.44267 +21 +-3.61805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44267 +20 +-3.61805 +11 +6.43816 +21 +-3.61955 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43816 +20 +-3.61955 +11 +6.43524 +21 +-3.62247 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43524 +20 +-3.62247 +11 +6.43373 +21 +-3.6255 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43373 +20 +-3.6255 +11 +6.43202 +21 +-3.63233 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43202 +20 +-3.63233 +11 +6.43202 +21 +-3.63723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43202 +20 +-3.63723 +11 +6.43373 +21 +-3.64406 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43373 +20 +-3.64406 +11 +6.43524 +21 +-3.64709 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43524 +20 +-3.64709 +11 +6.43816 +21 +-3.65001 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43816 +20 +-3.65001 +11 +6.44267 +21 +-3.65151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44267 +20 +-3.65151 +11 +6.44546 +21 +-3.65151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44546 +20 +-3.65151 +11 +6.44997 +21 +-3.65001 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44997 +20 +-3.65001 +11 +6.45135 +21 +-3.64863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45135 +20 +-3.64863 +11 +6.45219 +21 +-3.64804 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45219 +20 +-3.64804 +11 +6.4542 +21 +-3.64786 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4542 +20 +-3.64786 +11 +6.45586 +21 +-3.64902 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45586 +20 +-3.64902 +11 +6.45638 +21 +-3.65097 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45638 +20 +-3.65097 +11 +6.45553 +21 +-3.6528 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45553 +20 +-3.6528 +11 +6.45365 +21 +-3.65468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45365 +20 +-3.65468 +11 +6.45281 +21 +-3.65527 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45281 +20 +-3.65527 +11 +6.45264 +21 +-3.65528 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45264 +20 +-3.65528 +11 +6.4525 +21 +-3.65539 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4525 +20 +-3.65539 +11 +6.44687 +21 +-3.65726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44687 +20 +-3.65726 +11 +6.446 +21 +-3.65739 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.446 +20 +-3.65739 +11 +6.44594 +21 +-3.65742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44594 +20 +-3.65742 +11 +6.44219 +21 +-3.65742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44219 +20 +-3.65742 +11 +6.44132 +21 +-3.65726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44132 +20 +-3.65726 +11 +6.44126 +21 +-3.65726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44126 +20 +-3.65726 +11 +6.43563 +21 +-3.65539 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43563 +20 +-3.65539 +11 +6.43473 +21 +-3.6549 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43473 +20 +-3.6549 +11 +6.43464 +21 +-3.65475 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43464 +20 +-3.65475 +11 +6.43448 +21 +-3.65468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43448 +20 +-3.65468 +11 +6.43073 +21 +-3.65093 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43073 +20 +-3.65093 +11 +6.43022 +21 +-3.6502 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43022 +20 +-3.6502 +11 +6.43017 +21 +-3.65016 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43017 +20 +-3.65016 +11 +6.4283 +21 +-3.64641 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4283 +20 +-3.64641 +11 +6.42815 +21 +-3.64592 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42815 +20 +-3.64592 +11 +6.42808 +21 +-3.64581 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42808 +20 +-3.64581 +11 +6.4262 +21 +-3.63831 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4262 +20 +-3.63831 +11 +6.42616 +21 +-3.63772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42616 +20 +-3.63772 +11 +6.42611 +21 +-3.63759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42611 +20 +-3.63759 +11 +6.42611 +21 +-3.63197 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42611 +20 +-3.63197 +11 +6.42622 +21 +-3.63139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42622 +20 +-3.63139 +11 +6.4262 +21 +-3.63125 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4262 +20 +-3.63125 +11 +6.42808 +21 +-3.62375 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42808 +20 +-3.62375 +11 +6.42828 +21 +-3.62329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42828 +20 +-3.62329 +11 +6.4283 +21 +-3.62315 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4283 +20 +-3.62315 +11 +6.43017 +21 +-3.6194 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43017 +20 +-3.6194 +11 +6.4307 +21 +-3.61869 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4307 +20 +-3.61869 +11 +6.43073 +21 +-3.61863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43073 +20 +-3.61863 +11 +6.43448 +21 +-3.61488 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43448 +20 +-3.61488 +11 +6.43532 +21 +-3.61429 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43532 +20 +-3.61429 +11 +6.43549 +21 +-3.61428 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43549 +20 +-3.61428 +11 +6.43563 +21 +-3.61417 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43563 +20 +-3.61417 +11 +6.44126 +21 +-3.61229 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44126 +20 +-3.61229 +11 +6.44213 +21 +-3.61216 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44213 +20 +-3.61216 +11 +6.44219 +21 +-3.61214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44219 +20 +-3.61214 +11 +6.44594 +21 +-3.61214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44594 +20 +-3.61214 +11 +6.44681 +21 +-3.61229 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47922 +20 +-3.61062 +11 +6.48056 +21 +-3.61213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48056 +20 +-3.61213 +11 +6.48061 +21 +-3.61415 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48061 +20 +-3.61415 +11 +6.47253 +21 +-3.63839 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47253 +20 +-3.63839 +11 +6.48423 +21 +-3.63839 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48423 +20 +-3.63839 +11 +6.48423 +21 +-3.62822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48423 +20 +-3.62822 +11 +6.48441 +21 +-3.62721 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48441 +20 +-3.62721 +11 +6.48571 +21 +-3.62566 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48571 +20 +-3.62566 +11 +6.4877 +21 +-3.62531 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4877 +20 +-3.62531 +11 +6.48945 +21 +-3.62632 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48945 +20 +-3.62632 +11 +6.49014 +21 +-3.62822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49014 +20 +-3.62822 +11 +6.49014 +21 +-3.63839 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49014 +20 +-3.63839 +11 +6.49281 +21 +-3.63839 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49281 +20 +-3.63839 +11 +6.49382 +21 +-3.63857 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49382 +20 +-3.63857 +11 +6.49537 +21 +-3.63986 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49537 +20 +-3.63986 +11 +6.49572 +21 +-3.64185 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49572 +20 +-3.64185 +11 +6.49471 +21 +-3.6436 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49471 +20 +-3.6436 +11 +6.49281 +21 +-3.64429 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49281 +20 +-3.64429 +11 +6.49014 +21 +-3.64429 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49014 +20 +-3.64429 +11 +6.49014 +21 +-3.65446 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49014 +20 +-3.65446 +11 +6.48996 +21 +-3.65547 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48996 +20 +-3.65547 +11 +6.48866 +21 +-3.65702 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48866 +20 +-3.65702 +11 +6.48667 +21 +-3.65737 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48667 +20 +-3.65737 +11 +6.48492 +21 +-3.65636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48492 +20 +-3.65636 +11 +6.48423 +21 +-3.65446 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48423 +20 +-3.65446 +11 +6.48423 +21 +-3.64429 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48423 +20 +-3.64429 +11 +6.46844 +21 +-3.64429 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46844 +20 +-3.64429 +11 +6.46743 +21 +-3.64412 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46743 +20 +-3.64412 +11 +6.46725 +21 +-3.64397 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46725 +20 +-3.64397 +11 +6.46703 +21 +-3.64394 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46703 +20 +-3.64394 +11 +6.4665 +21 +-3.64333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4665 +20 +-3.64333 +11 +6.46588 +21 +-3.64282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46588 +20 +-3.64282 +11 +6.46584 +21 +-3.64259 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46584 +20 +-3.64259 +11 +6.46569 +21 +-3.64243 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46569 +20 +-3.64243 +11 +6.46567 +21 +-3.64162 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46567 +20 +-3.64162 +11 +6.46553 +21 +-3.64083 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46553 +20 +-3.64083 +11 +6.46564 +21 +-3.64063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46564 +20 +-3.64063 +11 +6.46564 +21 +-3.64041 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46564 +20 +-3.64041 +11 +6.47501 +21 +-3.61229 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47501 +20 +-3.61229 +11 +6.4755 +21 +-3.61138 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4755 +20 +-3.61138 +11 +6.47722 +21 +-3.61033 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47722 +20 +-3.61033 +11 +6.47922 +21 +-3.61062 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4087 +20 +-3.35417 +11 +6.41037 +21 +-3.35487 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41037 +20 +-3.35487 +11 +6.41106 +21 +-3.35654 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41106 +20 +-3.35654 +11 +6.41106 +21 +-3.64827 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41106 +20 +-3.64827 +11 +6.41037 +21 +-3.64994 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41037 +20 +-3.64994 +11 +6.4087 +21 +-3.65063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4087 +20 +-3.65063 +11 +6.40703 +21 +-3.64994 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40703 +20 +-3.64994 +11 +6.40634 +21 +-3.64827 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40634 +20 +-3.64827 +11 +6.40634 +21 +-3.3589 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40634 +20 +-3.3589 +11 +6.32366 +21 +-3.3589 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32366 +20 +-3.3589 +11 +6.32366 +21 +-3.64827 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32366 +20 +-3.64827 +11 +6.32297 +21 +-3.64994 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32297 +20 +-3.64994 +11 +6.3213 +21 +-3.65063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3213 +20 +-3.65063 +11 +6.31963 +21 +-3.64994 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31963 +20 +-3.64994 +11 +6.31894 +21 +-3.64827 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31894 +20 +-3.64827 +11 +6.31894 +21 +-3.35654 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31894 +20 +-3.35654 +11 +6.31963 +21 +-3.35487 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31963 +20 +-3.35487 +11 +6.3213 +21 +-3.35417 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3213 +20 +-3.35417 +11 +6.4087 +21 +-3.35417 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49061 +20 +-3.52304 +11 +6.4913 +21 +-3.52471 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4913 +20 +-3.52471 +11 +6.4913 +21 +-3.54529 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4913 +20 +-3.54529 +11 +6.49061 +21 +-3.54696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49061 +20 +-3.54696 +11 +6.48894 +21 +-3.54765 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48894 +20 +-3.54765 +11 +6.48727 +21 +-3.54696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48727 +20 +-3.54696 +11 +6.48657 +21 +-3.54529 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48657 +20 +-3.54529 +11 +6.48657 +21 +-3.52471 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48657 +20 +-3.52471 +11 +6.48727 +21 +-3.52304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48727 +20 +-3.52304 +11 +6.48894 +21 +-3.52235 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48894 +20 +-3.52235 +11 +6.49061 +21 +-3.52304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43273 +20 +-3.52304 +11 +6.43343 +21 +-3.52471 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43343 +20 +-3.52471 +11 +6.43343 +21 +-3.54529 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43343 +20 +-3.54529 +11 +6.43273 +21 +-3.54696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43273 +20 +-3.54696 +11 +6.43106 +21 +-3.54765 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43106 +20 +-3.54765 +11 +6.42939 +21 +-3.54696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42939 +20 +-3.54696 +11 +6.4287 +21 +-3.54529 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4287 +20 +-3.54529 +11 +6.4287 +21 +-3.52471 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4287 +20 +-3.52471 +11 +6.42939 +21 +-3.52304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42939 +20 +-3.52304 +11 +6.43106 +21 +-3.52235 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43106 +20 +-3.52235 +11 +6.43273 +21 +-3.52304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67681 +20 +-3.46729 +11 +5.67687 +21 +-3.46729 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67687 +20 +-3.46729 +11 +5.6825 +21 +-3.46917 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6825 +20 +-3.46917 +11 +5.6834 +21 +-3.46966 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6834 +20 +-3.46966 +11 +5.68349 +21 +-3.46981 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68349 +20 +-3.46981 +11 +5.68365 +21 +-3.46988 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68365 +20 +-3.46988 +11 +5.68553 +21 +-3.47176 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68553 +20 +-3.47176 +11 +5.68611 +21 +-3.4726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68611 +20 +-3.4726 +11 +5.68629 +21 +-3.47461 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68629 +20 +-3.47461 +11 +5.68513 +21 +-3.47626 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68513 +20 +-3.47626 +11 +5.68318 +21 +-3.47678 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68318 +20 +-3.47678 +11 +5.68135 +21 +-3.47593 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68135 +20 +-3.47593 +11 +5.67997 +21 +-3.47455 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67997 +20 +-3.47455 +11 +5.67546 +21 +-3.47305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67546 +20 +-3.47305 +11 +5.67267 +21 +-3.47305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67267 +20 +-3.47305 +11 +5.66816 +21 +-3.47455 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66816 +20 +-3.47455 +11 +5.66524 +21 +-3.47747 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66524 +20 +-3.47747 +11 +5.66373 +21 +-3.4805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66373 +20 +-3.4805 +11 +5.66202 +21 +-3.48733 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66202 +20 +-3.48733 +11 +5.66202 +21 +-3.49223 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66202 +20 +-3.49223 +11 +5.66373 +21 +-3.49906 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66373 +20 +-3.49906 +11 +5.66524 +21 +-3.50209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66524 +20 +-3.50209 +11 +5.66816 +21 +-3.50501 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66816 +20 +-3.50501 +11 +5.67267 +21 +-3.50651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67267 +20 +-3.50651 +11 +5.67546 +21 +-3.50651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67546 +20 +-3.50651 +11 +5.67997 +21 +-3.50501 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67997 +20 +-3.50501 +11 +5.68135 +21 +-3.50363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68135 +20 +-3.50363 +11 +5.68219 +21 +-3.50304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68219 +20 +-3.50304 +11 +5.6842 +21 +-3.50286 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6842 +20 +-3.50286 +11 +5.68586 +21 +-3.50402 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68586 +20 +-3.50402 +11 +5.68638 +21 +-3.50597 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68638 +20 +-3.50597 +11 +5.68553 +21 +-3.5078 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68553 +20 +-3.5078 +11 +5.68365 +21 +-3.50968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68365 +20 +-3.50968 +11 +5.68281 +21 +-3.51027 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68281 +20 +-3.51027 +11 +5.68264 +21 +-3.51028 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68264 +20 +-3.51028 +11 +5.6825 +21 +-3.51039 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6825 +20 +-3.51039 +11 +5.67687 +21 +-3.51226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67687 +20 +-3.51226 +11 +5.676 +21 +-3.51239 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.676 +20 +-3.51239 +11 +5.67594 +21 +-3.51242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67594 +20 +-3.51242 +11 +5.67219 +21 +-3.51242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67219 +20 +-3.51242 +11 +5.67132 +21 +-3.51226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67132 +20 +-3.51226 +11 +5.67126 +21 +-3.51226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67126 +20 +-3.51226 +11 +5.66563 +21 +-3.51039 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66563 +20 +-3.51039 +11 +5.66473 +21 +-3.5099 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66473 +20 +-3.5099 +11 +5.66464 +21 +-3.50975 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66464 +20 +-3.50975 +11 +5.66448 +21 +-3.50968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66448 +20 +-3.50968 +11 +5.66073 +21 +-3.50593 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66073 +20 +-3.50593 +11 +5.66022 +21 +-3.5052 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66022 +20 +-3.5052 +11 +5.66017 +21 +-3.50516 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66017 +20 +-3.50516 +11 +5.6583 +21 +-3.50141 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6583 +20 +-3.50141 +11 +5.65815 +21 +-3.50092 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65815 +20 +-3.50092 +11 +5.65808 +21 +-3.50081 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65808 +20 +-3.50081 +11 +5.6562 +21 +-3.49331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6562 +20 +-3.49331 +11 +5.65616 +21 +-3.49272 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65616 +20 +-3.49272 +11 +5.65611 +21 +-3.49259 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65611 +20 +-3.49259 +11 +5.65611 +21 +-3.48697 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65611 +20 +-3.48697 +11 +5.65622 +21 +-3.48639 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65622 +20 +-3.48639 +11 +5.6562 +21 +-3.48625 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6562 +20 +-3.48625 +11 +5.65808 +21 +-3.47875 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65808 +20 +-3.47875 +11 +5.65828 +21 +-3.47829 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65828 +20 +-3.47829 +11 +5.6583 +21 +-3.47815 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6583 +20 +-3.47815 +11 +5.66017 +21 +-3.4744 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66017 +20 +-3.4744 +11 +5.6607 +21 +-3.47369 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6607 +20 +-3.47369 +11 +5.66073 +21 +-3.47363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66073 +20 +-3.47363 +11 +5.66448 +21 +-3.46988 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66448 +20 +-3.46988 +11 +5.66532 +21 +-3.46929 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66532 +20 +-3.46929 +11 +5.66549 +21 +-3.46928 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66549 +20 +-3.46928 +11 +5.66563 +21 +-3.46917 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66563 +20 +-3.46917 +11 +5.67126 +21 +-3.46729 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67126 +20 +-3.46729 +11 +5.67213 +21 +-3.46716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67213 +20 +-3.46716 +11 +5.67219 +21 +-3.46714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67219 +20 +-3.46714 +11 +5.67594 +21 +-3.46714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67594 +20 +-3.46714 +11 +5.67681 +21 +-3.46729 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72382 +20 +-3.46732 +11 +5.72409 +21 +-3.46754 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72409 +20 +-3.46754 +11 +5.72443 +21 +-3.46762 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72443 +20 +-3.46762 +11 +5.72484 +21 +-3.46817 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72484 +20 +-3.46817 +11 +5.72537 +21 +-3.46862 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72537 +20 +-3.46862 +11 +5.72543 +21 +-3.46896 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72543 +20 +-3.46896 +11 +5.72564 +21 +-3.46924 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72564 +20 +-3.46924 +11 +5.7256 +21 +-3.46993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7256 +20 +-3.46993 +11 +5.72572 +21 +-3.47061 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72572 +20 +-3.47061 +11 +5.72554 +21 +-3.47091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72554 +20 +-3.47091 +11 +5.72552 +21 +-3.47126 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72552 +20 +-3.47126 +11 +5.70865 +21 +-3.51063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70865 +20 +-3.51063 +11 +5.70809 +21 +-3.51149 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70809 +20 +-3.51149 +11 +5.70629 +21 +-3.5124 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70629 +20 +-3.5124 +11 +5.70432 +21 +-3.51193 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70432 +20 +-3.51193 +11 +5.70311 +21 +-3.51032 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70311 +20 +-3.51032 +11 +5.70322 +21 +-3.5083 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.70322 +20 +-3.5083 +11 +5.71833 +21 +-3.47305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71833 +20 +-3.47305 +11 +5.69656 +21 +-3.47305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.69656 +20 +-3.47305 +11 +5.69555 +21 +-3.47287 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.69555 +20 +-3.47287 +11 +5.694 +21 +-3.47157 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.694 +20 +-3.47157 +11 +5.69365 +21 +-3.46958 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.69365 +20 +-3.46958 +11 +5.69466 +21 +-3.46783 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.69466 +20 +-3.46783 +11 +5.69656 +21 +-3.46714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.69656 +20 +-3.46714 +11 +5.72281 +21 +-3.46714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72281 +20 +-3.46714 +11 +5.72382 +21 +-3.46732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43506 +20 +-3.38669 +11 +5.43672 +21 +-3.39072 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43672 +20 +-3.39072 +11 +5.43584 +21 +-3.39384 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43584 +20 +-3.39384 +11 +5.43353 +21 +-3.39494 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43353 +20 +-3.39494 +11 +5.43153 +21 +-3.39256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43153 +20 +-3.39256 +11 +5.43153 +21 +-3.38469 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43153 +20 +-3.38469 +11 +5.43506 +21 +-3.38669 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43347 +20 +-3.21813 +11 +5.43516 +21 +-3.22197 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43516 +20 +-3.22197 +11 +5.4335 +21 +-3.22587 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4335 +20 +-3.22587 +11 +5.42978 +21 +-3.22737 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42978 +20 +-3.22737 +11 +5.42609 +21 +-3.22578 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42609 +20 +-3.22578 +11 +5.42447 +21 +-3.22191 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42447 +20 +-3.22191 +11 +5.42612 +21 +-3.21816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42612 +20 +-3.21816 +11 +5.42978 +21 +-3.21669 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42978 +20 +-3.21669 +11 +5.43347 +21 +-3.21813 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3857 +20 +-3.18703 +11 +5.3857 +21 +-3.17425 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3857 +20 +-3.17425 +11 +5.3857 +21 +-3.16904 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3857 +20 +-3.16904 +11 +5.3857 +21 +-3.14246 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3857 +20 +-3.14246 +11 +5.4743 +21 +-3.16904 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4743 +20 +-3.16904 +11 +5.4743 +21 +-3.17425 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4743 +20 +-3.17425 +11 +5.4743 +21 +-3.40575 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4743 +20 +-3.40575 +11 +5.4743 +21 +-3.41096 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4743 +20 +-3.41096 +11 +5.4743 +21 +-3.43754 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4743 +20 +-3.43754 +11 +5.3857 +21 +-3.41096 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3857 +20 +-3.41096 +11 +5.3857 +21 +-3.40575 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3857 +20 +-3.40575 +11 +5.3857 +21 +-3.39081 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3857 +20 +-3.39081 +11 +5.3857 +21 +-3.35087 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3857 +20 +-3.35087 +11 +5.3857 +21 +-3.33591 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3857 +20 +-3.33591 +11 +5.3857 +21 +-3.32 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3857 +20 +-3.32 +11 +5.3857 +21 +-3.29206 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3857 +20 +-3.29206 +11 +5.3857 +21 +-3.2635 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3857 +20 +-3.2635 +11 +5.3857 +21 +-3.24756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3857 +20 +-3.24756 +11 +5.3857 +21 +-3.21113 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3857 +20 +-3.21113 +11 +5.3857 +21 +-3.18703 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41216 +20 +-3.39081 +11 +5.4125 +21 +-3.39664 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4125 +20 +-3.39664 +11 +5.41355 +21 +-3.4008 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41355 +20 +-3.4008 +11 +5.41529 +21 +-3.40329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41529 +20 +-3.40329 +11 +5.41772 +21 +-3.40413 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41772 +20 +-3.40413 +11 +5.42059 +21 +-3.40331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42059 +20 +-3.40331 +11 +5.42341 +21 +-3.39987 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42341 +20 +-3.39987 +11 +5.42272 +21 +-3.39737 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42272 +20 +-3.39737 +11 +5.42247 +21 +-3.39669 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42247 +20 +-3.39669 +11 +5.42191 +21 +-3.39423 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42191 +20 +-3.39423 +11 +5.42172 +21 +-3.391 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42172 +20 +-3.391 +11 +5.42291 +21 +-3.38687 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42291 +20 +-3.38687 +11 +5.42584 +21 +-3.38481 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42584 +20 +-3.38481 +11 +5.42584 +21 +-3.39962 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42584 +20 +-3.39962 +11 +5.42769 +21 +-3.40384 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42769 +20 +-3.40384 +11 +5.43003 +21 +-3.40527 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43003 +20 +-3.40527 +11 +5.43337 +21 +-3.40575 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43337 +20 +-3.40575 +11 +5.43707 +21 +-3.40522 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43707 +20 +-3.40522 +11 +5.44047 +21 +-3.40362 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44047 +20 +-3.40362 +11 +5.44315 +21 +-3.4013 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44315 +20 +-3.4013 +11 +5.44506 +21 +-3.39841 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44506 +20 +-3.39841 +11 +5.44621 +21 +-3.39493 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44621 +20 +-3.39493 +11 +5.44659 +21 +-3.39087 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44659 +20 +-3.39087 +11 +5.44607 +21 +-3.38607 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44607 +20 +-3.38607 +11 +5.4445 +21 +-3.38183 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4445 +20 +-3.38183 +11 +5.44187 +21 +-3.37816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44187 +20 +-3.37816 +11 +5.43838 +21 +-3.37533 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43838 +20 +-3.37533 +11 +5.43418 +21 +-3.37363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43418 +20 +-3.37363 +11 +5.42928 +21 +-3.37306 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42928 +20 +-3.37306 +11 +5.42525 +21 +-3.3735 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42525 +20 +-3.3735 +11 +5.42148 +21 +-3.37481 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42148 +20 +-3.37481 +11 +5.41797 +21 +-3.377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41797 +20 +-3.377 +11 +5.4156 +21 +-3.3794 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4156 +20 +-3.3794 +11 +5.41375 +21 +-3.38259 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41375 +20 +-3.38259 +11 +5.41255 +21 +-3.38645 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41255 +20 +-3.38645 +11 +5.41216 +21 +-3.39081 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39872 +20 +-3.21113 +11 +5.39909 +21 +-3.21419 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39909 +20 +-3.21419 +11 +5.40037 +21 +-3.21578 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40037 +20 +-3.21578 +11 +5.40197 +21 +-3.21634 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40197 +20 +-3.21634 +11 +5.40409 +21 +-3.21644 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40409 +20 +-3.21644 +11 +5.41672 +21 +-3.21644 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41672 +20 +-3.21644 +11 +5.41456 +21 +-3.21945 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41456 +20 +-3.21945 +11 +5.41384 +21 +-3.22388 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41384 +20 +-3.22388 +11 +5.41438 +21 +-3.22723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41438 +20 +-3.22723 +11 +5.41598 +21 +-3.23044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41598 +20 +-3.23044 +11 +5.41866 +21 +-3.23353 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41866 +20 +-3.23353 +11 +5.42204 +21 +-3.23605 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42204 +20 +-3.23605 +11 +5.42577 +21 +-3.23756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42577 +20 +-3.23756 +11 +5.42984 +21 +-3.23806 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42984 +20 +-3.23806 +11 +5.43392 +21 +-3.23756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43392 +20 +-3.23756 +11 +5.43765 +21 +-3.23603 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43765 +20 +-3.23603 +11 +5.44103 +21 +-3.2335 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44103 +20 +-3.2335 +11 +5.4437 +21 +-3.2304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4437 +20 +-3.2304 +11 +5.44531 +21 +-3.22718 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44531 +20 +-3.22718 +11 +5.44584 +21 +-3.22384 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44584 +20 +-3.22384 +11 +5.44503 +21 +-3.21943 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44503 +20 +-3.21943 +11 +5.44259 +21 +-3.21637 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44259 +20 +-3.21637 +11 +5.44506 +21 +-3.21503 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44506 +20 +-3.21503 +11 +5.44591 +21 +-3.21056 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44591 +20 +-3.21056 +11 +5.44548 +21 +-3.20786 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44548 +20 +-3.20786 +11 +5.44422 +21 +-3.20637 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44422 +20 +-3.20637 +11 +5.44266 +21 +-3.20584 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44266 +20 +-3.20584 +11 +5.44053 +21 +-3.20575 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44053 +20 +-3.20575 +11 +5.40403 +21 +-3.20575 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40403 +20 +-3.20575 +11 +5.40191 +21 +-3.20584 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40191 +20 +-3.20584 +11 +5.40034 +21 +-3.20641 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40034 +20 +-3.20641 +11 +5.39909 +21 +-3.20803 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39909 +20 +-3.20803 +11 +5.39872 +21 +-3.21113 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41297 +20 +-3.35087 +11 +5.41338 +21 +-3.35406 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41338 +20 +-3.35406 +11 +5.41459 +21 +-3.35575 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41459 +20 +-3.35575 +11 +5.41625 +21 +-3.35634 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41625 +20 +-3.35634 +11 +5.41841 +21 +-3.35644 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41841 +20 +-3.35644 +11 +5.43153 +21 +-3.35644 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43153 +20 +-3.35644 +11 +5.43441 +21 +-3.35791 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43441 +20 +-3.35791 +11 +5.43559 +21 +-3.36106 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43559 +20 +-3.36106 +11 +5.43509 +21 +-3.36378 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43509 +20 +-3.36378 +11 +5.43459 +21 +-3.36594 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43459 +20 +-3.36594 +11 +5.43697 +21 +-3.36937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43697 +20 +-3.36937 +11 +5.44134 +21 +-3.37056 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44134 +20 +-3.37056 +11 +5.44425 +21 +-3.36978 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44425 +20 +-3.36978 +11 +5.44553 +21 +-3.36781 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44553 +20 +-3.36781 +11 +5.44606 +21 +-3.36563 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44606 +20 +-3.36563 +11 +5.44622 +21 +-3.36316 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44622 +20 +-3.36316 +11 +5.44516 +21 +-3.35975 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44516 +20 +-3.35975 +11 +5.44347 +21 +-3.35722 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44347 +20 +-3.35722 +11 +5.44241 +21 +-3.35631 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44241 +20 +-3.35631 +11 +5.44447 +21 +-3.35562 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44447 +20 +-3.35562 +11 +5.44555 +21 +-3.35398 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44555 +20 +-3.35398 +11 +5.44591 +21 +-3.35094 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44591 +20 +-3.35094 +11 +5.44548 +21 +-3.34772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44548 +20 +-3.34772 +11 +5.44422 +21 +-3.34606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44422 +20 +-3.34606 +11 +5.44262 +21 +-3.34553 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44262 +20 +-3.34553 +11 +5.44047 +21 +-3.34544 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44047 +20 +-3.34544 +11 +5.41853 +21 +-3.34544 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41853 +20 +-3.34544 +11 +5.41672 +21 +-3.34544 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41672 +20 +-3.34544 +11 +5.41403 +21 +-3.34656 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41403 +20 +-3.34656 +11 +5.41297 +21 +-3.35087 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41291 +20 +-3.33591 +11 +5.41336 +21 +-3.33898 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41336 +20 +-3.33898 +11 +5.41472 +21 +-3.34062 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41472 +20 +-3.34062 +11 +5.41644 +21 +-3.34128 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41644 +20 +-3.34128 +11 +5.41866 +21 +-3.34137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41866 +20 +-3.34137 +11 +5.41891 +21 +-3.34137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41891 +20 +-3.34137 +11 +5.42328 +21 +-3.34031 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42328 +20 +-3.34031 +11 +5.42427 +21 +-3.33829 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42427 +20 +-3.33829 +11 +5.42459 +21 +-3.33509 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42459 +20 +-3.33509 +11 +5.42413 +21 +-3.33202 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42413 +20 +-3.33202 +11 +5.42272 +21 +-3.33038 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42272 +20 +-3.33038 +11 +5.42103 +21 +-3.32978 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42103 +20 +-3.32978 +11 +5.41884 +21 +-3.32969 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41884 +20 +-3.32969 +11 +5.41859 +21 +-3.32969 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41859 +20 +-3.32969 +11 +5.41409 +21 +-3.33091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41409 +20 +-3.33091 +11 +5.4132 +21 +-3.33277 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4132 +20 +-3.33277 +11 +5.41291 +21 +-3.33591 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41297 +20 +-3.32 +11 +5.41306 +21 +-3.32209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41306 +20 +-3.32209 +11 +5.41359 +21 +-3.32375 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41359 +20 +-3.32375 +11 +5.41523 +21 +-3.32506 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41523 +20 +-3.32506 +11 +5.41841 +21 +-3.3255 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41841 +20 +-3.3255 +11 +5.42259 +21 +-3.32406 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42259 +20 +-3.32406 +11 +5.42319 +21 +-3.32241 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42319 +20 +-3.32241 +11 +5.42328 +21 +-3.32016 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42328 +20 +-3.32016 +11 +5.42403 +21 +-3.31816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42403 +20 +-3.31816 +11 +5.42647 +21 +-3.31763 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42647 +20 +-3.31763 +11 +5.43509 +21 +-3.31763 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43509 +20 +-3.31763 +11 +5.43484 +21 +-3.32169 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43484 +20 +-3.32169 +11 +5.43494 +21 +-3.32384 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43494 +20 +-3.32384 +11 +5.43547 +21 +-3.3255 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43547 +20 +-3.3255 +11 +5.43711 +21 +-3.32677 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43711 +20 +-3.32677 +11 +5.44028 +21 +-3.32719 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44028 +20 +-3.32719 +11 +5.44348 +21 +-3.32678 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44348 +20 +-3.32678 +11 +5.44509 +21 +-3.32556 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44509 +20 +-3.32556 +11 +5.44569 +21 +-3.32391 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44569 +20 +-3.32391 +11 +5.44578 +21 +-3.32178 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44578 +20 +-3.32178 +11 +5.44553 +21 +-3.31763 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44553 +20 +-3.31763 +11 +5.45166 +21 +-3.31763 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45166 +20 +-3.31763 +11 +5.45484 +21 +-3.31731 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45484 +20 +-3.31731 +11 +5.45658 +21 +-3.31564 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45658 +20 +-3.31564 +11 +5.45716 +21 +-3.31225 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45716 +20 +-3.31225 +11 +5.45677 +21 +-3.30905 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45677 +20 +-3.30905 +11 +5.45559 +21 +-3.30744 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45559 +20 +-3.30744 +11 +5.45409 +21 +-3.30684 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45409 +20 +-3.30684 +11 +5.45197 +21 +-3.30675 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45197 +20 +-3.30675 +11 +5.44553 +21 +-3.30675 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44553 +20 +-3.30675 +11 +5.44578 +21 +-3.30469 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44578 +20 +-3.30469 +11 +5.44497 +21 +-3.30219 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44497 +20 +-3.30219 +11 +5.44331 +21 +-3.30131 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44331 +20 +-3.30131 +11 +5.43959 +21 +-3.301 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43959 +20 +-3.301 +11 +5.43597 +21 +-3.30191 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43597 +20 +-3.30191 +11 +5.43491 +21 +-3.30419 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43491 +20 +-3.30419 +11 +5.43509 +21 +-3.30675 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43509 +20 +-3.30675 +11 +5.42584 +21 +-3.30675 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42584 +20 +-3.30675 +11 +5.42163 +21 +-3.30713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42163 +20 +-3.30713 +11 +5.41832 +21 +-3.30825 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41832 +20 +-3.30825 +11 +5.41591 +21 +-3.31012 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41591 +20 +-3.31012 +11 +5.41427 +21 +-3.31272 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41427 +20 +-3.31272 +11 +5.4133 +21 +-3.31601 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4133 +20 +-3.31601 +11 +5.41297 +21 +-3.32 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45034 +20 +-3.29209 +11 +5.45072 +21 +-3.29525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45072 +20 +-3.29525 +11 +5.452 +21 +-3.29691 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.452 +20 +-3.29691 +11 +5.45362 +21 +-3.29747 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45362 +20 +-3.29747 +11 +5.45578 +21 +-3.29756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45578 +20 +-3.29756 +11 +5.45794 +21 +-3.29747 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45794 +20 +-3.29747 +11 +5.45959 +21 +-3.29688 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45959 +20 +-3.29688 +11 +5.46086 +21 +-3.29528 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.46086 +20 +-3.29528 +11 +5.46128 +21 +-3.29212 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.46128 +20 +-3.29212 +11 +5.46086 +21 +-3.28891 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.46086 +20 +-3.28891 +11 +5.45959 +21 +-3.28725 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45959 +20 +-3.28725 +11 +5.458 +21 +-3.28672 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.458 +20 +-3.28672 +11 +5.45584 +21 +-3.28662 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45584 +20 +-3.28662 +11 +5.45369 +21 +-3.28672 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45369 +20 +-3.28672 +11 +5.45203 +21 +-3.28728 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45203 +20 +-3.28728 +11 +5.45072 +21 +-3.28894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45072 +20 +-3.28894 +11 +5.45034 +21 +-3.29209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41297 +20 +-3.29206 +11 +5.41338 +21 +-3.29527 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41338 +20 +-3.29527 +11 +5.41459 +21 +-3.29688 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41459 +20 +-3.29688 +11 +5.41625 +21 +-3.29747 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41625 +20 +-3.29747 +11 +5.41841 +21 +-3.29756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41841 +20 +-3.29756 +11 +5.44028 +21 +-3.29756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44028 +20 +-3.29756 +11 +5.44209 +21 +-3.2975 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44209 +20 +-3.2975 +11 +5.44478 +21 +-3.29637 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44478 +20 +-3.29637 +11 +5.44584 +21 +-3.29212 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44584 +20 +-3.29212 +11 +5.44584 +21 +-3.29209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44584 +20 +-3.29209 +11 +5.44544 +21 +-3.28891 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44544 +20 +-3.28891 +11 +5.44422 +21 +-3.28725 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44422 +20 +-3.28725 +11 +5.44256 +21 +-3.28672 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44256 +20 +-3.28672 +11 +5.44041 +21 +-3.28662 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44041 +20 +-3.28662 +11 +5.41847 +21 +-3.28662 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41847 +20 +-3.28662 +11 +5.41628 +21 +-3.28672 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41628 +20 +-3.28672 +11 +5.41466 +21 +-3.28725 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41466 +20 +-3.28725 +11 +5.41339 +21 +-3.28889 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41339 +20 +-3.28889 +11 +5.41297 +21 +-3.29206 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41297 +20 +-3.2635 +11 +5.41338 +21 +-3.26669 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41338 +20 +-3.26669 +11 +5.41459 +21 +-3.26837 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41459 +20 +-3.26837 +11 +5.41625 +21 +-3.26897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41625 +20 +-3.26897 +11 +5.41841 +21 +-3.26906 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41841 +20 +-3.26906 +11 +5.43153 +21 +-3.26906 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43153 +20 +-3.26906 +11 +5.43441 +21 +-3.27053 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43441 +20 +-3.27053 +11 +5.43559 +21 +-3.27369 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43559 +20 +-3.27369 +11 +5.43509 +21 +-3.27641 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43509 +20 +-3.27641 +11 +5.43459 +21 +-3.27856 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43459 +20 +-3.27856 +11 +5.43697 +21 +-3.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43697 +20 +-3.282 +11 +5.44134 +21 +-3.28319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44134 +20 +-3.28319 +11 +5.44425 +21 +-3.28241 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44425 +20 +-3.28241 +11 +5.44553 +21 +-3.28044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44553 +20 +-3.28044 +11 +5.44606 +21 +-3.27825 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44606 +20 +-3.27825 +11 +5.44622 +21 +-3.27578 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44622 +20 +-3.27578 +11 +5.44516 +21 +-3.27237 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44516 +20 +-3.27237 +11 +5.44347 +21 +-3.26984 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44347 +20 +-3.26984 +11 +5.44241 +21 +-3.26894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44241 +20 +-3.26894 +11 +5.44447 +21 +-3.26825 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44447 +20 +-3.26825 +11 +5.44555 +21 +-3.26661 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44555 +20 +-3.26661 +11 +5.44591 +21 +-3.26356 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44591 +20 +-3.26356 +11 +5.44548 +21 +-3.26034 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44548 +20 +-3.26034 +11 +5.44422 +21 +-3.25869 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44422 +20 +-3.25869 +11 +5.44262 +21 +-3.25816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44262 +20 +-3.25816 +11 +5.44047 +21 +-3.25806 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44047 +20 +-3.25806 +11 +5.41853 +21 +-3.25806 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41853 +20 +-3.25806 +11 +5.41672 +21 +-3.25806 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41672 +20 +-3.25806 +11 +5.41403 +21 +-3.25919 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41403 +20 +-3.25919 +11 +5.41297 +21 +-3.2635 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45034 +20 +-3.24759 +11 +5.45072 +21 +-3.25075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45072 +20 +-3.25075 +11 +5.452 +21 +-3.25241 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.452 +20 +-3.25241 +11 +5.45362 +21 +-3.25297 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45362 +20 +-3.25297 +11 +5.45578 +21 +-3.25306 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45578 +20 +-3.25306 +11 +5.45794 +21 +-3.25297 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45794 +20 +-3.25297 +11 +5.45959 +21 +-3.25237 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45959 +20 +-3.25237 +11 +5.46086 +21 +-3.25078 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.46086 +20 +-3.25078 +11 +5.46128 +21 +-3.24762 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.46128 +20 +-3.24762 +11 +5.46086 +21 +-3.24441 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.46086 +20 +-3.24441 +11 +5.45959 +21 +-3.24275 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45959 +20 +-3.24275 +11 +5.458 +21 +-3.24222 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.458 +20 +-3.24222 +11 +5.45584 +21 +-3.24213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45584 +20 +-3.24213 +11 +5.45369 +21 +-3.24222 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45369 +20 +-3.24222 +11 +5.45203 +21 +-3.24278 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45203 +20 +-3.24278 +11 +5.45072 +21 +-3.24444 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45072 +20 +-3.24444 +11 +5.45034 +21 +-3.24759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41297 +20 +-3.24756 +11 +5.41338 +21 +-3.25077 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41338 +20 +-3.25077 +11 +5.41459 +21 +-3.25237 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41459 +20 +-3.25237 +11 +5.41625 +21 +-3.25297 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41625 +20 +-3.25297 +11 +5.41841 +21 +-3.25306 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41841 +20 +-3.25306 +11 +5.44028 +21 +-3.25306 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44028 +20 +-3.25306 +11 +5.44209 +21 +-3.253 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44209 +20 +-3.253 +11 +5.44478 +21 +-3.25188 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44478 +20 +-3.25188 +11 +5.44584 +21 +-3.24762 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44584 +20 +-3.24762 +11 +5.44584 +21 +-3.24759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44584 +20 +-3.24759 +11 +5.44544 +21 +-3.24441 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44544 +20 +-3.24441 +11 +5.44422 +21 +-3.24275 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44422 +20 +-3.24275 +11 +5.44256 +21 +-3.24222 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44256 +20 +-3.24222 +11 +5.44041 +21 +-3.24213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44041 +20 +-3.24213 +11 +5.41847 +21 +-3.24213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41847 +20 +-3.24213 +11 +5.41628 +21 +-3.24222 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41628 +20 +-3.24222 +11 +5.41466 +21 +-3.24275 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41466 +20 +-3.24275 +11 +5.41339 +21 +-3.24439 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41339 +20 +-3.24439 +11 +5.41297 +21 +-3.24756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41241 +20 +-3.18703 +11 +5.41262 +21 +-3.19083 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41262 +20 +-3.19083 +11 +5.41327 +21 +-3.19417 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41327 +20 +-3.19417 +11 +5.41434 +21 +-3.19706 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41434 +20 +-3.19706 +11 +5.41775 +21 +-3.20047 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41775 +20 +-3.20047 +11 +5.42027 +21 +-3.20138 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42027 +20 +-3.20138 +11 +5.42328 +21 +-3.20169 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42328 +20 +-3.20169 +11 +5.42626 +21 +-3.20138 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42626 +20 +-3.20138 +11 +5.42869 +21 +-3.20047 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42869 +20 +-3.20047 +11 +5.43172 +21 +-3.19744 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43172 +20 +-3.19744 +11 +5.43328 +21 +-3.1935 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43328 +20 +-3.1935 +11 +5.43409 +21 +-3.18944 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43409 +20 +-3.18944 +11 +5.43498 +21 +-3.18625 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43498 +20 +-3.18625 +11 +5.43653 +21 +-3.18519 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43653 +20 +-3.18519 +11 +5.43791 +21 +-3.18887 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43791 +20 +-3.18887 +11 +5.43697 +21 +-3.19328 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43697 +20 +-3.19328 +11 +5.43603 +21 +-3.19606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43603 +20 +-3.19606 +11 +5.43822 +21 +-3.19888 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43822 +20 +-3.19888 +11 +5.44191 +21 +-3.20025 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44191 +20 +-3.20025 +11 +5.44441 +21 +-3.19806 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44441 +20 +-3.19806 +11 +5.446 +21 +-3.19344 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.446 +20 +-3.19344 +11 +5.44653 +21 +-3.18894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44653 +20 +-3.18894 +11 +5.44614 +21 +-3.18405 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44614 +20 +-3.18405 +11 +5.44495 +21 +-3.18026 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44495 +20 +-3.18026 +11 +5.44298 +21 +-3.17754 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44298 +20 +-3.17754 +11 +5.44021 +21 +-3.17592 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44021 +20 +-3.17592 +11 +5.43666 +21 +-3.17537 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43666 +20 +-3.17537 +11 +5.43357 +21 +-3.17567 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43357 +20 +-3.17567 +11 +5.43094 +21 +-3.17656 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43094 +20 +-3.17656 +11 +5.42741 +21 +-3.17956 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42741 +20 +-3.17956 +11 +5.42548 +21 +-3.18345 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42548 +20 +-3.18345 +11 +5.42447 +21 +-3.18737 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42447 +20 +-3.18737 +11 +5.42375 +21 +-3.19052 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42375 +20 +-3.19052 +11 +5.42272 +21 +-3.19156 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42272 +20 +-3.19156 +11 +5.42159 +21 +-3.19061 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42159 +20 +-3.19061 +11 +5.42122 +21 +-3.18775 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42122 +20 +-3.18775 +11 +5.42275 +21 +-3.183 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42275 +20 +-3.183 +11 +5.42428 +21 +-3.17884 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42428 +20 +-3.17884 +11 +5.42322 +21 +-3.17663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42322 +20 +-3.17663 +11 +5.42033 +21 +-3.17484 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42033 +20 +-3.17484 +11 +5.41828 +21 +-3.17425 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41828 +20 +-3.17425 +11 +5.41591 +21 +-3.17544 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41591 +20 +-3.17544 +11 +5.41396 +21 +-3.1792 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41396 +20 +-3.1792 +11 +5.4128 +21 +-3.18306 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4128 +20 +-3.18306 +11 +5.41241 +21 +-3.18703 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14665 +20 +-3.31598 +11 +6.14832 +21 +-3.31668 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14832 +20 +-3.31668 +11 +6.14902 +21 +-3.31835 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14902 +20 +-3.31835 +11 +6.14902 +21 +-3.43055 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14902 +20 +-3.43055 +11 +6.14832 +21 +-3.43222 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14832 +20 +-3.43222 +11 +6.14665 +21 +-3.43291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14665 +20 +-3.43291 +11 +6.14498 +21 +-3.43222 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14498 +20 +-3.43222 +11 +6.14429 +21 +-3.43055 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14429 +20 +-3.43055 +11 +6.14429 +21 +-3.32071 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14429 +20 +-3.32071 +11 +5.84623 +21 +-3.32071 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84623 +20 +-3.32071 +11 +5.80571 +21 +-3.36123 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80571 +20 +-3.36123 +11 +5.80571 +21 +-3.43055 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80571 +20 +-3.43055 +11 +5.80502 +21 +-3.43222 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80502 +20 +-3.43222 +11 +5.80335 +21 +-3.43291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80335 +20 +-3.43291 +11 +5.80168 +21 +-3.43222 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80168 +20 +-3.43222 +11 +5.80098 +21 +-3.43055 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80098 +20 +-3.43055 +11 +5.80098 +21 +-3.36025 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80098 +20 +-3.36025 +11 +5.80168 +21 +-3.35858 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80168 +20 +-3.35858 +11 +5.80168 +21 +-3.35858 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80168 +20 +-3.35858 +11 +5.84358 +21 +-3.31668 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84358 +20 +-3.31668 +11 +5.8444 +21 +-3.31634 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8444 +20 +-3.31634 +11 +5.84525 +21 +-3.31598 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84525 +20 +-3.31598 +11 +6.14665 +21 +-3.31598 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77588 +20 +-3.36983 +11 +5.77657 +21 +-3.3715 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77657 +20 +-3.3715 +11 +5.77657 +21 +-3.38882 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77657 +20 +-3.38882 +11 +5.7939 +21 +-3.38882 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7939 +20 +-3.38882 +11 +5.79557 +21 +-3.38951 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79557 +20 +-3.38951 +11 +5.79626 +21 +-3.39118 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79626 +20 +-3.39118 +11 +5.79557 +21 +-3.39285 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79557 +20 +-3.39285 +11 +5.7939 +21 +-3.39354 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7939 +20 +-3.39354 +11 +5.77657 +21 +-3.39354 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77657 +20 +-3.39354 +11 +5.77657 +21 +-3.41087 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77657 +20 +-3.41087 +11 +5.77588 +21 +-3.41254 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77588 +20 +-3.41254 +11 +5.77421 +21 +-3.41323 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77421 +20 +-3.41323 +11 +5.77254 +21 +-3.41254 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77254 +20 +-3.41254 +11 +5.77185 +21 +-3.41087 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77185 +20 +-3.41087 +11 +5.77185 +21 +-3.39354 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77185 +20 +-3.39354 +11 +5.75453 +21 +-3.39354 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75453 +20 +-3.39354 +11 +5.75286 +21 +-3.39285 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75286 +20 +-3.39285 +11 +5.75217 +21 +-3.39118 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75217 +20 +-3.39118 +11 +5.75286 +21 +-3.38951 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75286 +20 +-3.38951 +11 +5.75453 +21 +-3.38882 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75453 +20 +-3.38882 +11 +5.77185 +21 +-3.38882 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77185 +20 +-3.38882 +11 +5.77185 +21 +-3.3715 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77185 +20 +-3.3715 +11 +5.77254 +21 +-3.36983 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77254 +20 +-3.36983 +11 +5.77421 +21 +-3.36913 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77421 +20 +-3.36913 +11 +5.77588 +21 +-3.36983 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4768 +20 +-3.31437 +11 +6.47868 +21 +-3.31625 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47868 +20 +-3.31625 +11 +6.47927 +21 +-3.31709 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47927 +20 +-3.31709 +11 +6.47928 +21 +-3.31726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47928 +20 +-3.31726 +11 +6.47939 +21 +-3.3174 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47939 +20 +-3.3174 +11 +6.48126 +21 +-3.32302 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48126 +20 +-3.32302 +11 +6.48139 +21 +-3.3239 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48139 +20 +-3.3239 +11 +6.48142 +21 +-3.32396 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48142 +20 +-3.32396 +11 +6.48142 +21 +-3.32771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48142 +20 +-3.32771 +11 +6.48126 +21 +-3.32858 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48126 +20 +-3.32858 +11 +6.48126 +21 +-3.32864 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48126 +20 +-3.32864 +11 +6.47939 +21 +-3.33427 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47939 +20 +-3.33427 +11 +6.4789 +21 +-3.33517 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4789 +20 +-3.33517 +11 +6.47875 +21 +-3.33526 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47875 +20 +-3.33526 +11 +6.47868 +21 +-3.33542 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47868 +20 +-3.33542 +11 +6.47493 +21 +-3.33917 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47493 +20 +-3.33917 +11 +6.4742 +21 +-3.33968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4742 +20 +-3.33968 +11 +6.47416 +21 +-3.33972 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47416 +20 +-3.33972 +11 +6.47041 +21 +-3.3416 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47041 +20 +-3.3416 +11 +6.46992 +21 +-3.34174 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46992 +20 +-3.34174 +11 +6.46981 +21 +-3.34182 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46981 +20 +-3.34182 +11 +6.46231 +21 +-3.3437 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46231 +20 +-3.3437 +11 +6.46172 +21 +-3.34374 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46172 +20 +-3.34374 +11 +6.46159 +21 +-3.34378 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46159 +20 +-3.34378 +11 +6.45597 +21 +-3.34378 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45597 +20 +-3.34378 +11 +6.45539 +21 +-3.34368 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45539 +20 +-3.34368 +11 +6.45525 +21 +-3.3437 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45525 +20 +-3.3437 +11 +6.44775 +21 +-3.34182 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44775 +20 +-3.34182 +11 +6.44729 +21 +-3.34161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44729 +20 +-3.34161 +11 +6.44715 +21 +-3.3416 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44715 +20 +-3.3416 +11 +6.4434 +21 +-3.33972 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4434 +20 +-3.33972 +11 +6.44269 +21 +-3.3392 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44269 +20 +-3.3392 +11 +6.44263 +21 +-3.33917 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44263 +20 +-3.33917 +11 +6.43888 +21 +-3.33542 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43888 +20 +-3.33542 +11 +6.43829 +21 +-3.33458 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43829 +20 +-3.33458 +11 +6.43828 +21 +-3.3344 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43828 +20 +-3.3344 +11 +6.43817 +21 +-3.33427 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43817 +20 +-3.33427 +11 +6.43629 +21 +-3.32864 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43629 +20 +-3.32864 +11 +6.43616 +21 +-3.32777 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43616 +20 +-3.32777 +11 +6.43614 +21 +-3.32771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43614 +20 +-3.32771 +11 +6.43614 +21 +-3.32396 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43614 +20 +-3.32396 +11 +6.43629 +21 +-3.32309 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43629 +20 +-3.32309 +11 +6.43629 +21 +-3.32302 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43629 +20 +-3.32302 +11 +6.43817 +21 +-3.3174 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43817 +20 +-3.3174 +11 +6.43866 +21 +-3.3165 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43866 +20 +-3.3165 +11 +6.43881 +21 +-3.31641 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43881 +20 +-3.31641 +11 +6.43888 +21 +-3.31625 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43888 +20 +-3.31625 +11 +6.44076 +21 +-3.31437 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44076 +20 +-3.31437 +11 +6.4416 +21 +-3.31378 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4416 +20 +-3.31378 +11 +6.44361 +21 +-3.31361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44361 +20 +-3.31361 +11 +6.44526 +21 +-3.31477 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44526 +20 +-3.31477 +11 +6.44578 +21 +-3.31672 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44578 +20 +-3.31672 +11 +6.44493 +21 +-3.31855 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44493 +20 +-3.31855 +11 +6.44355 +21 +-3.31993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44355 +20 +-3.31993 +11 +6.44205 +21 +-3.32444 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44205 +20 +-3.32444 +11 +6.44205 +21 +-3.32723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44205 +20 +-3.32723 +11 +6.44355 +21 +-3.33174 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44355 +20 +-3.33174 +11 +6.44647 +21 +-3.33465 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44647 +20 +-3.33465 +11 +6.4495 +21 +-3.33617 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4495 +20 +-3.33617 +11 +6.45633 +21 +-3.33788 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45633 +20 +-3.33788 +11 +6.46123 +21 +-3.33788 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46123 +20 +-3.33788 +11 +6.46806 +21 +-3.33617 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46806 +20 +-3.33617 +11 +6.47109 +21 +-3.33465 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47109 +20 +-3.33465 +11 +6.47401 +21 +-3.33174 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47401 +20 +-3.33174 +11 +6.47551 +21 +-3.32723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47551 +20 +-3.32723 +11 +6.47551 +21 +-3.32444 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47551 +20 +-3.32444 +11 +6.47401 +21 +-3.31993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47401 +20 +-3.31993 +11 +6.47263 +21 +-3.31855 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47263 +20 +-3.31855 +11 +6.47204 +21 +-3.31771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47204 +20 +-3.31771 +11 +6.47186 +21 +-3.31569 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47186 +20 +-3.31569 +11 +6.47302 +21 +-3.31404 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47302 +20 +-3.31404 +11 +6.47497 +21 +-3.31352 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47497 +20 +-3.31352 +11 +6.4768 +21 +-3.31437 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4268 +20 +-3.31437 +11 +6.42868 +21 +-3.31625 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42868 +20 +-3.31625 +11 +6.42927 +21 +-3.31709 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42927 +20 +-3.31709 +11 +6.42928 +21 +-3.31726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42928 +20 +-3.31726 +11 +6.42939 +21 +-3.3174 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42939 +20 +-3.3174 +11 +6.43126 +21 +-3.32302 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43126 +20 +-3.32302 +11 +6.43139 +21 +-3.3239 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43139 +20 +-3.3239 +11 +6.43142 +21 +-3.32396 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43142 +20 +-3.32396 +11 +6.43142 +21 +-3.32771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43142 +20 +-3.32771 +11 +6.43126 +21 +-3.32858 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43126 +20 +-3.32858 +11 +6.43126 +21 +-3.32864 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43126 +20 +-3.32864 +11 +6.42939 +21 +-3.33427 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42939 +20 +-3.33427 +11 +6.4289 +21 +-3.33517 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4289 +20 +-3.33517 +11 +6.42875 +21 +-3.33526 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42875 +20 +-3.33526 +11 +6.42868 +21 +-3.33542 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42868 +20 +-3.33542 +11 +6.42493 +21 +-3.33917 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42493 +20 +-3.33917 +11 +6.4242 +21 +-3.33968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4242 +20 +-3.33968 +11 +6.42416 +21 +-3.33972 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42416 +20 +-3.33972 +11 +6.42041 +21 +-3.3416 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42041 +20 +-3.3416 +11 +6.41992 +21 +-3.34174 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41992 +20 +-3.34174 +11 +6.41981 +21 +-3.34182 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41981 +20 +-3.34182 +11 +6.41231 +21 +-3.3437 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41231 +20 +-3.3437 +11 +6.41172 +21 +-3.34374 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41172 +20 +-3.34374 +11 +6.41159 +21 +-3.34378 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41159 +20 +-3.34378 +11 +6.40597 +21 +-3.34378 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40597 +20 +-3.34378 +11 +6.40539 +21 +-3.34368 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40539 +20 +-3.34368 +11 +6.40525 +21 +-3.3437 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40525 +20 +-3.3437 +11 +6.39775 +21 +-3.34182 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39775 +20 +-3.34182 +11 +6.39729 +21 +-3.34161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39729 +20 +-3.34161 +11 +6.39715 +21 +-3.3416 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39715 +20 +-3.3416 +11 +6.3934 +21 +-3.33972 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3934 +20 +-3.33972 +11 +6.39269 +21 +-3.3392 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39269 +20 +-3.3392 +11 +6.39263 +21 +-3.33917 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39263 +20 +-3.33917 +11 +6.38888 +21 +-3.33542 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38888 +20 +-3.33542 +11 +6.38829 +21 +-3.33458 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38829 +20 +-3.33458 +11 +6.38828 +21 +-3.3344 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38828 +20 +-3.3344 +11 +6.38817 +21 +-3.33427 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38817 +20 +-3.33427 +11 +6.38629 +21 +-3.32864 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38629 +20 +-3.32864 +11 +6.38616 +21 +-3.32777 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38616 +20 +-3.32777 +11 +6.38614 +21 +-3.32771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38614 +20 +-3.32771 +11 +6.38614 +21 +-3.32396 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38614 +20 +-3.32396 +11 +6.38629 +21 +-3.32309 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38629 +20 +-3.32309 +11 +6.38629 +21 +-3.32302 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38629 +20 +-3.32302 +11 +6.38817 +21 +-3.3174 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38817 +20 +-3.3174 +11 +6.38866 +21 +-3.3165 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38866 +20 +-3.3165 +11 +6.38881 +21 +-3.31641 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38881 +20 +-3.31641 +11 +6.38888 +21 +-3.31625 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38888 +20 +-3.31625 +11 +6.39076 +21 +-3.31437 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39076 +20 +-3.31437 +11 +6.3916 +21 +-3.31378 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3916 +20 +-3.31378 +11 +6.39361 +21 +-3.31361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39361 +20 +-3.31361 +11 +6.39526 +21 +-3.31477 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39526 +20 +-3.31477 +11 +6.39578 +21 +-3.31672 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39578 +20 +-3.31672 +11 +6.39493 +21 +-3.31855 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39493 +20 +-3.31855 +11 +6.39355 +21 +-3.31993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39355 +20 +-3.31993 +11 +6.39205 +21 +-3.32444 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39205 +20 +-3.32444 +11 +6.39205 +21 +-3.32723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39205 +20 +-3.32723 +11 +6.39355 +21 +-3.33174 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39355 +20 +-3.33174 +11 +6.39647 +21 +-3.33465 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39647 +20 +-3.33465 +11 +6.3995 +21 +-3.33617 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3995 +20 +-3.33617 +11 +6.40633 +21 +-3.33788 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40633 +20 +-3.33788 +11 +6.41123 +21 +-3.33788 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41123 +20 +-3.33788 +11 +6.41806 +21 +-3.33617 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41806 +20 +-3.33617 +11 +6.42109 +21 +-3.33465 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42109 +20 +-3.33465 +11 +6.42401 +21 +-3.33174 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42401 +20 +-3.33174 +11 +6.42551 +21 +-3.32723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42551 +20 +-3.32723 +11 +6.42551 +21 +-3.32444 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42551 +20 +-3.32444 +11 +6.42401 +21 +-3.31993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42401 +20 +-3.31993 +11 +6.42263 +21 +-3.31855 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42263 +20 +-3.31855 +11 +6.42204 +21 +-3.31771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42204 +20 +-3.31771 +11 +6.42186 +21 +-3.31569 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42186 +20 +-3.31569 +11 +6.42302 +21 +-3.31404 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42302 +20 +-3.31404 +11 +6.42497 +21 +-3.31352 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42497 +20 +-3.31352 +11 +6.4268 +21 +-3.31437 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3728 +20 +-3.31397 +11 +6.37468 +21 +-3.31584 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37468 +20 +-3.31584 +11 +6.37527 +21 +-3.31668 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37527 +20 +-3.31668 +11 +6.37528 +21 +-3.31686 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37528 +20 +-3.31686 +11 +6.37539 +21 +-3.317 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37539 +20 +-3.317 +11 +6.37726 +21 +-3.32262 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37726 +20 +-3.32262 +11 +6.37739 +21 +-3.3235 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37739 +20 +-3.3235 +11 +6.37742 +21 +-3.32356 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37742 +20 +-3.32356 +11 +6.37742 +21 +-3.32731 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37742 +20 +-3.32731 +11 +6.37726 +21 +-3.32818 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37726 +20 +-3.32818 +11 +6.37726 +21 +-3.32824 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37726 +20 +-3.32824 +11 +6.37539 +21 +-3.33386 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37539 +20 +-3.33386 +11 +6.3749 +21 +-3.33477 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3749 +20 +-3.33477 +11 +6.37475 +21 +-3.33486 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37475 +20 +-3.33486 +11 +6.37468 +21 +-3.33502 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37468 +20 +-3.33502 +11 +6.37093 +21 +-3.33877 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37093 +20 +-3.33877 +11 +6.3702 +21 +-3.33927 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3702 +20 +-3.33927 +11 +6.37016 +21 +-3.33932 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37016 +20 +-3.33932 +11 +6.36641 +21 +-3.3412 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36641 +20 +-3.3412 +11 +6.36592 +21 +-3.34134 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36592 +20 +-3.34134 +11 +6.36581 +21 +-3.34142 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36581 +20 +-3.34142 +11 +6.35831 +21 +-3.34329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35831 +20 +-3.34329 +11 +6.35772 +21 +-3.34334 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35772 +20 +-3.34334 +11 +6.35759 +21 +-3.34338 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35759 +20 +-3.34338 +11 +6.35197 +21 +-3.34338 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35197 +20 +-3.34338 +11 +6.35139 +21 +-3.34328 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35139 +20 +-3.34328 +11 +6.35125 +21 +-3.34329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35125 +20 +-3.34329 +11 +6.34375 +21 +-3.34142 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34375 +20 +-3.34142 +11 +6.34329 +21 +-3.34121 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34329 +20 +-3.34121 +11 +6.34315 +21 +-3.3412 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34315 +20 +-3.3412 +11 +6.3394 +21 +-3.33932 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3394 +20 +-3.33932 +11 +6.33869 +21 +-3.33879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33869 +20 +-3.33879 +11 +6.33863 +21 +-3.33877 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33863 +20 +-3.33877 +11 +6.33488 +21 +-3.33502 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33488 +20 +-3.33502 +11 +6.33429 +21 +-3.33418 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33429 +20 +-3.33418 +11 +6.33428 +21 +-3.334 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33428 +20 +-3.334 +11 +6.33417 +21 +-3.33386 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33417 +20 +-3.33386 +11 +6.33229 +21 +-3.32824 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33229 +20 +-3.32824 +11 +6.33216 +21 +-3.32737 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33216 +20 +-3.32737 +11 +6.33214 +21 +-3.32731 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33214 +20 +-3.32731 +11 +6.33214 +21 +-3.32356 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33214 +20 +-3.32356 +11 +6.33229 +21 +-3.32269 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33229 +20 +-3.32269 +11 +6.33229 +21 +-3.32262 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33229 +20 +-3.32262 +11 +6.33417 +21 +-3.317 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33417 +20 +-3.317 +11 +6.33466 +21 +-3.3161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33466 +20 +-3.3161 +11 +6.33481 +21 +-3.316 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33481 +20 +-3.316 +11 +6.33488 +21 +-3.31584 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33488 +20 +-3.31584 +11 +6.33676 +21 +-3.31397 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33676 +20 +-3.31397 +11 +6.3376 +21 +-3.31338 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3376 +20 +-3.31338 +11 +6.33961 +21 +-3.31321 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33961 +20 +-3.31321 +11 +6.34126 +21 +-3.31436 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34126 +20 +-3.31436 +11 +6.34178 +21 +-3.31631 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34178 +20 +-3.31631 +11 +6.34093 +21 +-3.31815 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34093 +20 +-3.31815 +11 +6.33955 +21 +-3.31953 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33955 +20 +-3.31953 +11 +6.33805 +21 +-3.32404 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33805 +20 +-3.32404 +11 +6.33805 +21 +-3.32683 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33805 +20 +-3.32683 +11 +6.33955 +21 +-3.33134 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33955 +20 +-3.33134 +11 +6.34247 +21 +-3.33425 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34247 +20 +-3.33425 +11 +6.3455 +21 +-3.33577 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3455 +20 +-3.33577 +11 +6.35233 +21 +-3.33748 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35233 +20 +-3.33748 +11 +6.35723 +21 +-3.33748 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35723 +20 +-3.33748 +11 +6.36406 +21 +-3.33577 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36406 +20 +-3.33577 +11 +6.36709 +21 +-3.33425 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36709 +20 +-3.33425 +11 +6.37001 +21 +-3.33134 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37001 +20 +-3.33134 +11 +6.37151 +21 +-3.32683 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37151 +20 +-3.32683 +11 +6.37151 +21 +-3.32404 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37151 +20 +-3.32404 +11 +6.37001 +21 +-3.31953 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37001 +20 +-3.31953 +11 +6.36863 +21 +-3.31815 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36863 +20 +-3.31815 +11 +6.36804 +21 +-3.31731 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36804 +20 +-3.31731 +11 +6.36786 +21 +-3.31529 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36786 +20 +-3.31529 +11 +6.36902 +21 +-3.31364 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36902 +20 +-3.31364 +11 +6.37097 +21 +-3.31312 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37097 +20 +-3.31312 +11 +6.3728 +21 +-3.31397 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26852 +20 +-3.2709 +11 +6.26865 +21 +-3.27102 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26865 +20 +-3.27102 +11 +6.26883 +21 +-3.27104 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26883 +20 +-3.27104 +11 +6.27258 +21 +-3.27291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27258 +20 +-3.27291 +11 +6.27329 +21 +-3.27344 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27329 +20 +-3.27344 +11 +6.27335 +21 +-3.27346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27335 +20 +-3.27346 +11 +6.27522 +21 +-3.27534 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27522 +20 +-3.27534 +11 +6.27573 +21 +-3.27606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27573 +20 +-3.27606 +11 +6.27577 +21 +-3.27611 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27577 +20 +-3.27611 +11 +6.27765 +21 +-3.27985 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27765 +20 +-3.27985 +11 +6.27794 +21 +-3.28084 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27794 +20 +-3.28084 +11 +6.2779 +21 +-3.28101 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2779 +20 +-3.28101 +11 +6.27796 +21 +-3.28118 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27796 +20 +-3.28118 +11 +6.27796 +21 +-3.28492 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27796 +20 +-3.28492 +11 +6.27781 +21 +-3.28579 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27781 +20 +-3.28579 +11 +6.27781 +21 +-3.28586 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27781 +20 +-3.28586 +11 +6.27593 +21 +-3.29148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27593 +20 +-3.29148 +11 +6.27545 +21 +-3.29238 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27545 +20 +-3.29238 +11 +6.2753 +21 +-3.29248 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2753 +20 +-3.29248 +11 +6.27522 +21 +-3.29264 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27522 +20 +-3.29264 +11 +6.25777 +21 +-3.31009 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25777 +20 +-3.31009 +11 +6.27501 +21 +-3.31009 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27501 +20 +-3.31009 +11 +6.27602 +21 +-3.31027 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27602 +20 +-3.31027 +11 +6.27757 +21 +-3.31157 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27757 +20 +-3.31157 +11 +6.27792 +21 +-3.31356 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27792 +20 +-3.31356 +11 +6.27691 +21 +-3.31531 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27691 +20 +-3.31531 +11 +6.27501 +21 +-3.316 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27501 +20 +-3.316 +11 +6.25064 +21 +-3.316 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25064 +20 +-3.316 +11 +6.25 +21 +-3.31589 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25 +20 +-3.31589 +11 +6.24987 +21 +-3.3159 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24987 +20 +-3.3159 +11 +6.24981 +21 +-3.31585 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24981 +20 +-3.31585 +11 +6.24963 +21 +-3.31582 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24963 +20 +-3.31582 +11 +6.24895 +21 +-3.31525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24895 +20 +-3.31525 +11 +6.24822 +21 +-3.31474 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24822 +20 +-3.31474 +11 +6.24818 +21 +-3.31461 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24818 +20 +-3.31461 +11 +6.24808 +21 +-3.31452 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24808 +20 +-3.31452 +11 +6.24792 +21 +-3.31365 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24792 +20 +-3.31365 +11 +6.2477 +21 +-3.31279 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2477 +20 +-3.31279 +11 +6.24775 +21 +-3.31267 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24775 +20 +-3.31267 +11 +6.24773 +21 +-3.31253 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24773 +20 +-3.31253 +11 +6.24817 +21 +-3.31176 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24817 +20 +-3.31176 +11 +6.24855 +21 +-3.31096 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24855 +20 +-3.31096 +11 +6.27055 +21 +-3.28895 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27055 +20 +-3.28895 +11 +6.27206 +21 +-3.28445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27206 +20 +-3.28445 +11 +6.27206 +21 +-3.28187 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27206 +20 +-3.28187 +11 +6.27071 +21 +-3.27918 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27071 +20 +-3.27918 +11 +6.26951 +21 +-3.27798 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26951 +20 +-3.27798 +11 +6.26681 +21 +-3.27663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26681 +20 +-3.27663 +11 +6.25883 +21 +-3.27663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25883 +20 +-3.27663 +11 +6.25614 +21 +-3.27798 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25614 +20 +-3.27798 +11 +6.2546 +21 +-3.27951 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2546 +20 +-3.27951 +11 +6.25376 +21 +-3.2801 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25376 +20 +-3.2801 +11 +6.25175 +21 +-3.28028 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25175 +20 +-3.28028 +11 +6.25009 +21 +-3.27912 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25009 +20 +-3.27912 +11 +6.24957 +21 +-3.27717 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24957 +20 +-3.27717 +11 +6.25042 +21 +-3.27534 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25042 +20 +-3.27534 +11 +6.2523 +21 +-3.27346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2523 +20 +-3.27346 +11 +6.25302 +21 +-3.27296 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25302 +20 +-3.27296 +11 +6.25307 +21 +-3.27291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25307 +20 +-3.27291 +11 +6.25682 +21 +-3.27104 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25682 +20 +-3.27104 +11 +6.2578 +21 +-3.27074 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2578 +20 +-3.27074 +11 +6.25797 +21 +-3.27078 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25797 +20 +-3.27078 +11 +6.25814 +21 +-3.27072 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25814 +20 +-3.27072 +11 +6.26751 +21 +-3.27072 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26751 +20 +-3.27072 +11 +6.26852 +21 +-3.2709 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22526 +20 +-3.27088 +11 +6.22532 +21 +-3.27088 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22532 +20 +-3.27088 +11 +6.23095 +21 +-3.27275 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23095 +20 +-3.27275 +11 +6.23185 +21 +-3.27324 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23185 +20 +-3.27324 +11 +6.23194 +21 +-3.27339 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23194 +20 +-3.27339 +11 +6.2321 +21 +-3.27346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2321 +20 +-3.27346 +11 +6.23585 +21 +-3.27721 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23585 +20 +-3.27721 +11 +6.23636 +21 +-3.27794 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23636 +20 +-3.27794 +11 +6.2364 +21 +-3.27798 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2364 +20 +-3.27798 +11 +6.23828 +21 +-3.28173 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23828 +20 +-3.28173 +11 +6.23842 +21 +-3.28222 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23842 +20 +-3.28222 +11 +6.2385 +21 +-3.28233 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2385 +20 +-3.28233 +11 +6.24038 +21 +-3.28983 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24038 +20 +-3.28983 +11 +6.24042 +21 +-3.29042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24042 +20 +-3.29042 +11 +6.24047 +21 +-3.29055 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24047 +20 +-3.29055 +11 +6.24047 +21 +-3.29617 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24047 +20 +-3.29617 +11 +6.24036 +21 +-3.29675 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24036 +20 +-3.29675 +11 +6.24038 +21 +-3.29689 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24038 +20 +-3.29689 +11 +6.2385 +21 +-3.30439 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2385 +20 +-3.30439 +11 +6.2383 +21 +-3.30485 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2383 +20 +-3.30485 +11 +6.23828 +21 +-3.30499 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23828 +20 +-3.30499 +11 +6.2364 +21 +-3.30874 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2364 +20 +-3.30874 +11 +6.23588 +21 +-3.30945 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23588 +20 +-3.30945 +11 +6.23585 +21 +-3.30951 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23585 +20 +-3.30951 +11 +6.2321 +21 +-3.31326 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2321 +20 +-3.31326 +11 +6.23126 +21 +-3.31385 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23126 +20 +-3.31385 +11 +6.23109 +21 +-3.31386 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23109 +20 +-3.31386 +11 +6.23095 +21 +-3.31397 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23095 +20 +-3.31397 +11 +6.22532 +21 +-3.31585 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22532 +20 +-3.31585 +11 +6.22445 +21 +-3.31598 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22445 +20 +-3.31598 +11 +6.22439 +21 +-3.316 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22439 +20 +-3.316 +11 +6.21502 +21 +-3.316 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21502 +20 +-3.316 +11 +6.21463 +21 +-3.31593 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21463 +20 +-3.31593 +11 +6.2145 +21 +-3.31595 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2145 +20 +-3.31595 +11 +6.21439 +21 +-3.31589 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21439 +20 +-3.31589 +11 +6.21401 +21 +-3.31582 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21401 +20 +-3.31582 +11 +6.21342 +21 +-3.31533 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21342 +20 +-3.31533 +11 +6.21275 +21 +-3.31494 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21275 +20 +-3.31494 +11 +6.21266 +21 +-3.31469 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21266 +20 +-3.31469 +11 +6.21246 +21 +-3.31452 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21246 +20 +-3.31452 +11 +6.21233 +21 +-3.31377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21233 +20 +-3.31377 +11 +6.21206 +21 +-3.31305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21206 +20 +-3.31305 +11 +6.21206 +21 +-3.27368 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21206 +20 +-3.27368 +11 +6.21213 +21 +-3.27329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21213 +20 +-3.27329 +11 +6.21211 +21 +-3.27316 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21211 +20 +-3.27316 +11 +6.21217 +21 +-3.27305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21217 +20 +-3.27305 +11 +6.21224 +21 +-3.27267 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21224 +20 +-3.27267 +11 +6.21273 +21 +-3.27208 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21273 +20 +-3.27208 +11 +6.21312 +21 +-3.27141 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21312 +20 +-3.27141 +11 +6.21337 +21 +-3.27132 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21337 +20 +-3.27132 +11 +6.21354 +21 +-3.27112 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21354 +20 +-3.27112 +11 +6.2143 +21 +-3.27099 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2143 +20 +-3.27099 +11 +6.21502 +21 +-3.27072 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21502 +20 +-3.27072 +11 +6.22439 +21 +-3.27072 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22439 +20 +-3.27072 +11 +6.22526 +21 +-3.27088 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21797 +20 +-3.31009 +11 +6.22391 +21 +-3.31009 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22391 +20 +-3.31009 +11 +6.22842 +21 +-3.30859 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22842 +20 +-3.30859 +11 +6.23134 +21 +-3.30567 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23134 +20 +-3.30567 +11 +6.23285 +21 +-3.30264 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23285 +20 +-3.30264 +11 +6.23456 +21 +-3.29581 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23456 +20 +-3.29581 +11 +6.23456 +21 +-3.29091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23456 +20 +-3.29091 +11 +6.23285 +21 +-3.28408 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23285 +20 +-3.28408 +11 +6.23134 +21 +-3.28105 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23134 +20 +-3.28105 +11 +6.22842 +21 +-3.27813 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22842 +20 +-3.27813 +11 +6.22391 +21 +-3.27663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22391 +20 +-3.27663 +11 +6.21797 +21 +-3.27663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21797 +20 +-3.27663 +11 +6.21797 +21 +-3.31009 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48073 +20 +-3.27707 +11 +6.48142 +21 +-3.27896 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48142 +20 +-3.27896 +11 +6.48142 +21 +-3.30146 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48142 +20 +-3.30146 +11 +6.48124 +21 +-3.30247 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48124 +20 +-3.30247 +11 +6.47994 +21 +-3.30402 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47994 +20 +-3.30402 +11 +6.47795 +21 +-3.30437 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47795 +20 +-3.30437 +11 +6.4762 +21 +-3.30336 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4762 +20 +-3.30336 +11 +6.47551 +21 +-3.30146 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47551 +20 +-3.30146 +11 +6.47551 +21 +-3.29316 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47551 +20 +-3.29316 +11 +6.4481 +21 +-3.29316 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4481 +20 +-3.29316 +11 +6.45056 +21 +-3.29562 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45056 +20 +-3.29562 +11 +6.45106 +21 +-3.29635 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45106 +20 +-3.29635 +11 +6.45111 +21 +-3.29639 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45111 +20 +-3.29639 +11 +6.45298 +21 +-3.30014 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45298 +20 +-3.30014 +11 +6.45328 +21 +-3.30112 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45328 +20 +-3.30112 +11 +6.45281 +21 +-3.30309 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45281 +20 +-3.30309 +11 +6.45118 +21 +-3.30429 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45118 +20 +-3.30429 +11 +6.44917 +21 +-3.30417 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44917 +20 +-3.30417 +11 +6.4477 +21 +-3.30278 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4477 +20 +-3.30278 +11 +6.44604 +21 +-3.29946 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44604 +20 +-3.29946 +11 +6.44284 +21 +-3.29626 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44284 +20 +-3.29626 +11 +6.43746 +21 +-3.29267 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43746 +20 +-3.29267 +11 +6.43671 +21 +-3.29196 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43671 +20 +-3.29196 +11 +6.43667 +21 +-3.2918 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43667 +20 +-3.2918 +11 +6.43654 +21 +-3.29169 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43654 +20 +-3.29169 +11 +6.43639 +21 +-3.29084 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43639 +20 +-3.29084 +11 +6.43615 +21 +-3.29002 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43615 +20 +-3.29002 +11 +6.43622 +21 +-3.28987 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43622 +20 +-3.28987 +11 +6.43619 +21 +-3.2897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43619 +20 +-3.2897 +11 +6.43661 +21 +-3.28896 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43661 +20 +-3.28896 +11 +6.43696 +21 +-3.28817 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43696 +20 +-3.28817 +11 +6.43711 +21 +-3.2881 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43711 +20 +-3.2881 +11 +6.4372 +21 +-3.28795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4372 +20 +-3.28795 +11 +6.438 +21 +-3.28766 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.438 +20 +-3.28766 +11 +6.43877 +21 +-3.28728 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43877 +20 +-3.28728 +11 +6.43893 +21 +-3.28732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43893 +20 +-3.28732 +11 +6.43909 +21 +-3.28726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43909 +20 +-3.28726 +11 +6.47551 +21 +-3.28726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47551 +20 +-3.28726 +11 +6.47551 +21 +-3.27896 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47551 +20 +-3.27896 +11 +6.47569 +21 +-3.27795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47569 +20 +-3.27795 +11 +6.47699 +21 +-3.27641 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47699 +20 +-3.27641 +11 +6.47898 +21 +-3.27606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47898 +20 +-3.27606 +11 +6.48073 +21 +-3.27707 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43073 +20 +-3.27707 +11 +6.43142 +21 +-3.27896 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43142 +20 +-3.27896 +11 +6.43142 +21 +-3.30146 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43142 +20 +-3.30146 +11 +6.43124 +21 +-3.30247 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43124 +20 +-3.30247 +11 +6.42994 +21 +-3.30402 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42994 +20 +-3.30402 +11 +6.42795 +21 +-3.30437 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42795 +20 +-3.30437 +11 +6.4262 +21 +-3.30336 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4262 +20 +-3.30336 +11 +6.42551 +21 +-3.30146 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42551 +20 +-3.30146 +11 +6.42551 +21 +-3.29316 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42551 +20 +-3.29316 +11 +6.3981 +21 +-3.29316 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3981 +20 +-3.29316 +11 +6.40056 +21 +-3.29562 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40056 +20 +-3.29562 +11 +6.40106 +21 +-3.29635 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40106 +20 +-3.29635 +11 +6.40111 +21 +-3.29639 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40111 +20 +-3.29639 +11 +6.40298 +21 +-3.30014 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40298 +20 +-3.30014 +11 +6.40328 +21 +-3.30112 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40328 +20 +-3.30112 +11 +6.40281 +21 +-3.30309 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40281 +20 +-3.30309 +11 +6.40118 +21 +-3.30429 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40118 +20 +-3.30429 +11 +6.39917 +21 +-3.30417 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39917 +20 +-3.30417 +11 +6.3977 +21 +-3.30278 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3977 +20 +-3.30278 +11 +6.39604 +21 +-3.29946 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39604 +20 +-3.29946 +11 +6.39284 +21 +-3.29626 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39284 +20 +-3.29626 +11 +6.38746 +21 +-3.29267 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38746 +20 +-3.29267 +11 +6.38671 +21 +-3.29196 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38671 +20 +-3.29196 +11 +6.38667 +21 +-3.2918 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38667 +20 +-3.2918 +11 +6.38654 +21 +-3.29169 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38654 +20 +-3.29169 +11 +6.38639 +21 +-3.29084 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38639 +20 +-3.29084 +11 +6.38615 +21 +-3.29002 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38615 +20 +-3.29002 +11 +6.38622 +21 +-3.28987 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38622 +20 +-3.28987 +11 +6.38619 +21 +-3.2897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38619 +20 +-3.2897 +11 +6.38661 +21 +-3.28896 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38661 +20 +-3.28896 +11 +6.38696 +21 +-3.28817 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38696 +20 +-3.28817 +11 +6.38711 +21 +-3.2881 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38711 +20 +-3.2881 +11 +6.3872 +21 +-3.28795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3872 +20 +-3.28795 +11 +6.388 +21 +-3.28766 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.388 +20 +-3.28766 +11 +6.38877 +21 +-3.28728 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38877 +20 +-3.28728 +11 +6.38893 +21 +-3.28732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38893 +20 +-3.28732 +11 +6.38909 +21 +-3.28726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38909 +20 +-3.28726 +11 +6.42551 +21 +-3.28726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42551 +20 +-3.28726 +11 +6.42551 +21 +-3.27896 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42551 +20 +-3.27896 +11 +6.42569 +21 +-3.27795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42569 +20 +-3.27795 +11 +6.42699 +21 +-3.27641 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42699 +20 +-3.27641 +11 +6.42898 +21 +-3.27606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42898 +20 +-3.27606 +11 +6.43073 +21 +-3.27707 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37673 +20 +-3.27666 +11 +6.37742 +21 +-3.27856 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37742 +20 +-3.27856 +11 +6.37742 +21 +-3.30106 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37742 +20 +-3.30106 +11 +6.37724 +21 +-3.30207 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37724 +20 +-3.30207 +11 +6.37594 +21 +-3.30362 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37594 +20 +-3.30362 +11 +6.37395 +21 +-3.30397 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37395 +20 +-3.30397 +11 +6.3722 +21 +-3.30296 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3722 +20 +-3.30296 +11 +6.37151 +21 +-3.30106 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37151 +20 +-3.30106 +11 +6.37151 +21 +-3.29276 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37151 +20 +-3.29276 +11 +6.3441 +21 +-3.29276 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3441 +20 +-3.29276 +11 +6.34656 +21 +-3.29522 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34656 +20 +-3.29522 +11 +6.34706 +21 +-3.29594 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34706 +20 +-3.29594 +11 +6.34711 +21 +-3.29599 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34711 +20 +-3.29599 +11 +6.34898 +21 +-3.29974 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34898 +20 +-3.29974 +11 +6.34928 +21 +-3.30072 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34928 +20 +-3.30072 +11 +6.34881 +21 +-3.30269 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34881 +20 +-3.30269 +11 +6.34718 +21 +-3.30389 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34718 +20 +-3.30389 +11 +6.34517 +21 +-3.30377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34517 +20 +-3.30377 +11 +6.3437 +21 +-3.30238 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3437 +20 +-3.30238 +11 +6.34204 +21 +-3.29906 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34204 +20 +-3.29906 +11 +6.33884 +21 +-3.29585 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33884 +20 +-3.29585 +11 +6.33346 +21 +-3.29227 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33346 +20 +-3.29227 +11 +6.33271 +21 +-3.29156 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33271 +20 +-3.29156 +11 +6.33267 +21 +-3.2914 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33267 +20 +-3.2914 +11 +6.33254 +21 +-3.29129 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33254 +20 +-3.29129 +11 +6.33239 +21 +-3.29044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33239 +20 +-3.29044 +11 +6.33215 +21 +-3.28962 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33215 +20 +-3.28962 +11 +6.33222 +21 +-3.28947 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33222 +20 +-3.28947 +11 +6.33219 +21 +-3.2893 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33219 +20 +-3.2893 +11 +6.33261 +21 +-3.28856 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33261 +20 +-3.28856 +11 +6.33296 +21 +-3.28777 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33296 +20 +-3.28777 +11 +6.33311 +21 +-3.2877 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33311 +20 +-3.2877 +11 +6.3332 +21 +-3.28755 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3332 +20 +-3.28755 +11 +6.334 +21 +-3.28726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.334 +20 +-3.28726 +11 +6.33477 +21 +-3.28688 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33477 +20 +-3.28688 +11 +6.33493 +21 +-3.28692 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33493 +20 +-3.28692 +11 +6.33509 +21 +-3.28686 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33509 +20 +-3.28686 +11 +6.37151 +21 +-3.28686 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37151 +20 +-3.28686 +11 +6.37151 +21 +-3.27856 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37151 +20 +-3.27856 +11 +6.37169 +21 +-3.27755 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37169 +20 +-3.27755 +11 +6.37299 +21 +-3.276 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37299 +20 +-3.276 +11 +6.37498 +21 +-3.27565 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37498 +20 +-3.27565 +11 +6.37673 +21 +-3.27666 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56637 +20 +-3.23297 +11 +6.56651 +21 +-3.23295 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56651 +20 +-3.23295 +11 +6.56661 +21 +-3.23301 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56661 +20 +-3.23301 +11 +6.56694 +21 +-3.23307 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56694 +20 +-3.23307 +11 +6.56755 +21 +-3.23358 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56755 +20 +-3.23358 +11 +6.56823 +21 +-3.23399 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56823 +20 +-3.23399 +11 +6.56831 +21 +-3.23421 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56831 +20 +-3.23421 +11 +6.56849 +21 +-3.23437 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56849 +20 +-3.23437 +11 +6.56863 +21 +-3.23515 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56863 +20 +-3.23515 +11 +6.56889 +21 +-3.2359 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56889 +20 +-3.2359 +11 +6.5688 +21 +-3.23612 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5688 +20 +-3.23612 +11 +6.56884 +21 +-3.23635 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56884 +20 +-3.23635 +11 +6.56844 +21 +-3.23704 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56844 +20 +-3.23704 +11 +6.56816 +21 +-3.23779 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56816 +20 +-3.23779 +11 +6.5592 +21 +-3.24802 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5592 +20 +-3.24802 +11 +6.55944 +21 +-3.24807 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55944 +20 +-3.24807 +11 +6.55958 +21 +-3.24818 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55958 +20 +-3.24818 +11 +6.55976 +21 +-3.2482 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55976 +20 +-3.2482 +11 +6.5635 +21 +-3.25007 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5635 +20 +-3.25007 +11 +6.56421 +21 +-3.2506 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56421 +20 +-3.2506 +11 +6.56427 +21 +-3.25063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56427 +20 +-3.25063 +11 +6.56615 +21 +-3.2525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56615 +20 +-3.2525 +11 +6.56665 +21 +-3.25322 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56665 +20 +-3.25322 +11 +6.5667 +21 +-3.25327 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5667 +20 +-3.25327 +11 +6.56857 +21 +-3.25702 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56857 +20 +-3.25702 +11 +6.56887 +21 +-3.258 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56887 +20 +-3.258 +11 +6.56883 +21 +-3.25817 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56883 +20 +-3.25817 +11 +6.56889 +21 +-3.25834 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56889 +20 +-3.25834 +11 +6.56889 +21 +-3.26771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56889 +20 +-3.26771 +11 +6.56871 +21 +-3.26872 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56871 +20 +-3.26872 +11 +6.56859 +21 +-3.26886 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56859 +20 +-3.26886 +11 +6.56857 +21 +-3.26903 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56857 +20 +-3.26903 +11 +6.5667 +21 +-3.27278 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5667 +20 +-3.27278 +11 +6.56617 +21 +-3.27349 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56617 +20 +-3.27349 +11 +6.56615 +21 +-3.27355 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56615 +20 +-3.27355 +11 +6.56427 +21 +-3.27542 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56427 +20 +-3.27542 +11 +6.56355 +21 +-3.27593 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56355 +20 +-3.27593 +11 +6.5635 +21 +-3.27598 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5635 +20 +-3.27598 +11 +6.55976 +21 +-3.27785 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55976 +20 +-3.27785 +11 +6.55877 +21 +-3.27815 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55877 +20 +-3.27815 +11 +6.5586 +21 +-3.2781 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5586 +20 +-3.2781 +11 +6.55843 +21 +-3.27816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55843 +20 +-3.27816 +11 +6.54719 +21 +-3.27816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54719 +20 +-3.27816 +11 +6.54618 +21 +-3.27799 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54618 +20 +-3.27799 +11 +6.54604 +21 +-3.27787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54604 +20 +-3.27787 +11 +6.54587 +21 +-3.27785 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54587 +20 +-3.27785 +11 +6.54212 +21 +-3.27598 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54212 +20 +-3.27598 +11 +6.54141 +21 +-3.27545 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54141 +20 +-3.27545 +11 +6.54135 +21 +-3.27542 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54135 +20 +-3.27542 +11 +6.53947 +21 +-3.27355 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53947 +20 +-3.27355 +11 +6.53889 +21 +-3.27271 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53889 +20 +-3.27271 +11 +6.53871 +21 +-3.2707 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53871 +20 +-3.2707 +11 +6.53987 +21 +-3.26904 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53987 +20 +-3.26904 +11 +6.54182 +21 +-3.26852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54182 +20 +-3.26852 +11 +6.54365 +21 +-3.26937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54365 +20 +-3.26937 +11 +6.54519 +21 +-3.27091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54519 +20 +-3.27091 +11 +6.54788 +21 +-3.27226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54788 +20 +-3.27226 +11 +6.55774 +21 +-3.27226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55774 +20 +-3.27226 +11 +6.56044 +21 +-3.27091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56044 +20 +-3.27091 +11 +6.56163 +21 +-3.26971 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56163 +20 +-3.26971 +11 +6.56298 +21 +-3.26702 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56298 +20 +-3.26702 +11 +6.56298 +21 +-3.25904 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56298 +20 +-3.25904 +11 +6.56163 +21 +-3.25634 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56163 +20 +-3.25634 +11 +6.56044 +21 +-3.25514 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56044 +20 +-3.25514 +11 +6.55774 +21 +-3.25379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55774 +20 +-3.25379 +11 +6.55281 +21 +-3.25379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55281 +20 +-3.25379 +11 +6.55237 +21 +-3.25372 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55237 +20 +-3.25372 +11 +6.55224 +21 +-3.25374 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55224 +20 +-3.25374 +11 +6.55213 +21 +-3.25367 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55213 +20 +-3.25367 +11 +6.5518 +21 +-3.25361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5518 +20 +-3.25361 +11 +6.55119 +21 +-3.2531 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55119 +20 +-3.2531 +11 +6.55051 +21 +-3.25269 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55051 +20 +-3.25269 +11 +6.55043 +21 +-3.25247 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55043 +20 +-3.25247 +11 +6.55025 +21 +-3.25232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55025 +20 +-3.25232 +11 +6.55011 +21 +-3.25153 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55011 +20 +-3.25153 +11 +6.54986 +21 +-3.25078 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54986 +20 +-3.25078 +11 +6.54994 +21 +-3.25056 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54994 +20 +-3.25056 +11 +6.5499 +21 +-3.25033 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5499 +20 +-3.25033 +11 +6.5503 +21 +-3.24964 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5503 +20 +-3.24964 +11 +6.55059 +21 +-3.2489 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55059 +20 +-3.2489 +11 +6.55943 +21 +-3.23879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55943 +20 +-3.23879 +11 +6.54156 +21 +-3.23879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54156 +20 +-3.23879 +11 +6.54055 +21 +-3.23862 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54055 +20 +-3.23862 +11 +6.539 +21 +-3.23732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.539 +20 +-3.23732 +11 +6.53865 +21 +-3.23533 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53865 +20 +-3.23533 +11 +6.53966 +21 +-3.23358 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53966 +20 +-3.23358 +11 +6.54156 +21 +-3.23289 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54156 +20 +-3.23289 +11 +6.56593 +21 +-3.23289 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56593 +20 +-3.23289 +11 +6.56637 +21 +-3.23297 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51618 +20 +-3.23304 +11 +6.51625 +21 +-3.23304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51625 +20 +-3.23304 +11 +6.52187 +21 +-3.23492 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52187 +20 +-3.23492 +11 +6.52277 +21 +-3.2354 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52277 +20 +-3.2354 +11 +6.52287 +21 +-3.23555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52287 +20 +-3.23555 +11 +6.52303 +21 +-3.23563 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52303 +20 +-3.23563 +11 +6.52678 +21 +-3.23938 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52678 +20 +-3.23938 +11 +6.52728 +21 +-3.2401 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52728 +20 +-3.2401 +11 +6.52733 +21 +-3.24015 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52733 +20 +-3.24015 +11 +6.5292 +21 +-3.2439 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5292 +20 +-3.2439 +11 +6.52935 +21 +-3.24438 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52935 +20 +-3.24438 +11 +6.52943 +21 +-3.2445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52943 +20 +-3.2445 +11 +6.5313 +21 +-3.252 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5313 +20 +-3.252 +11 +6.53134 +21 +-3.25259 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53134 +20 +-3.25259 +11 +6.53139 +21 +-3.25271 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53139 +20 +-3.25271 +11 +6.53139 +21 +-3.25834 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53139 +20 +-3.25834 +11 +6.53129 +21 +-3.25892 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53129 +20 +-3.25892 +11 +6.5313 +21 +-3.25906 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5313 +20 +-3.25906 +11 +6.52943 +21 +-3.26655 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52943 +20 +-3.26655 +11 +6.52922 +21 +-3.26702 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52922 +20 +-3.26702 +11 +6.5292 +21 +-3.26716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5292 +20 +-3.26716 +11 +6.52733 +21 +-3.27091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52733 +20 +-3.27091 +11 +6.5268 +21 +-3.27162 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5268 +20 +-3.27162 +11 +6.52678 +21 +-3.27168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52678 +20 +-3.27168 +11 +6.52303 +21 +-3.27542 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52303 +20 +-3.27542 +11 +6.52219 +21 +-3.27601 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52219 +20 +-3.27601 +11 +6.52201 +21 +-3.27603 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52201 +20 +-3.27603 +11 +6.52187 +21 +-3.27614 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52187 +20 +-3.27614 +11 +6.51625 +21 +-3.27801 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51625 +20 +-3.27801 +11 +6.51538 +21 +-3.27814 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51538 +20 +-3.27814 +11 +6.51531 +21 +-3.27816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51531 +20 +-3.27816 +11 +6.50594 +21 +-3.27816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50594 +20 +-3.27816 +11 +6.50556 +21 +-3.2781 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50556 +20 +-3.2781 +11 +6.50543 +21 +-3.27812 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50543 +20 +-3.27812 +11 +6.50531 +21 +-3.27805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50531 +20 +-3.27805 +11 +6.50493 +21 +-3.27799 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50493 +20 +-3.27799 +11 +6.50434 +21 +-3.27749 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50434 +20 +-3.27749 +11 +6.50368 +21 +-3.27711 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50368 +20 +-3.27711 +11 +6.50359 +21 +-3.27686 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50359 +20 +-3.27686 +11 +6.50338 +21 +-3.27669 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50338 +20 +-3.27669 +11 +6.50325 +21 +-3.27593 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50325 +20 +-3.27593 +11 +6.50299 +21 +-3.27521 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50299 +20 +-3.27521 +11 +6.50299 +21 +-3.23584 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50299 +20 +-3.23584 +11 +6.50306 +21 +-3.23546 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50306 +20 +-3.23546 +11 +6.50303 +21 +-3.23533 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50303 +20 +-3.23533 +11 +6.5031 +21 +-3.23522 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5031 +20 +-3.23522 +11 +6.50317 +21 +-3.23483 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50317 +20 +-3.23483 +11 +6.50366 +21 +-3.23424 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50366 +20 +-3.23424 +11 +6.50404 +21 +-3.23358 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50404 +20 +-3.23358 +11 +6.50429 +21 +-3.23349 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50429 +20 +-3.23349 +11 +6.50446 +21 +-3.23328 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50446 +20 +-3.23328 +11 +6.50522 +21 +-3.23315 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50522 +20 +-3.23315 +11 +6.50594 +21 +-3.23289 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50594 +20 +-3.23289 +11 +6.51531 +21 +-3.23289 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51531 +20 +-3.23289 +11 +6.51618 +21 +-3.23304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50889 +20 +-3.27226 +11 +6.51484 +21 +-3.27226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51484 +20 +-3.27226 +11 +6.51934 +21 +-3.27076 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51934 +20 +-3.27076 +11 +6.52226 +21 +-3.26784 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52226 +20 +-3.26784 +11 +6.52378 +21 +-3.26481 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52378 +20 +-3.26481 +11 +6.52549 +21 +-3.25798 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52549 +20 +-3.25798 +11 +6.52549 +21 +-3.25308 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52549 +20 +-3.25308 +11 +6.52378 +21 +-3.24625 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52378 +20 +-3.24625 +11 +6.52226 +21 +-3.24322 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52226 +20 +-3.24322 +11 +6.51934 +21 +-3.2403 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51934 +20 +-3.2403 +11 +6.51484 +21 +-3.23879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51484 +20 +-3.23879 +11 +6.50889 +21 +-3.23879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50889 +20 +-3.23879 +11 +6.50889 +21 +-3.27226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40121 +20 +-3.23867 +11 +6.40128 +21 +-3.23867 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40128 +20 +-3.23867 +11 +6.4069 +21 +-3.24054 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4069 +20 +-3.24054 +11 +6.4078 +21 +-3.24103 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4078 +20 +-3.24103 +11 +6.40789 +21 +-3.24118 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40789 +20 +-3.24118 +11 +6.40805 +21 +-3.24126 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40805 +20 +-3.24126 +11 +6.42551 +21 +-3.25871 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42551 +20 +-3.25871 +11 +6.42551 +21 +-3.24147 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42551 +20 +-3.24147 +11 +6.42569 +21 +-3.24046 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42569 +20 +-3.24046 +11 +6.42699 +21 +-3.23891 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42699 +20 +-3.23891 +11 +6.42898 +21 +-3.23856 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42898 +20 +-3.23856 +11 +6.43073 +21 +-3.23957 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43073 +20 +-3.23957 +11 +6.43142 +21 +-3.24147 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43142 +20 +-3.24147 +11 +6.43142 +21 +-3.26584 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43142 +20 +-3.26584 +11 +6.4313 +21 +-3.26648 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4313 +20 +-3.26648 +11 +6.43132 +21 +-3.2666 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43132 +20 +-3.2666 +11 +6.43127 +21 +-3.26667 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43127 +20 +-3.26667 +11 +6.43124 +21 +-3.26685 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43124 +20 +-3.26685 +11 +6.43067 +21 +-3.26753 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43067 +20 +-3.26753 +11 +6.43016 +21 +-3.26826 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43016 +20 +-3.26826 +11 +6.43003 +21 +-3.26829 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43003 +20 +-3.26829 +11 +6.42994 +21 +-3.2684 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42994 +20 +-3.2684 +11 +6.42906 +21 +-3.26855 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42906 +20 +-3.26855 +11 +6.42821 +21 +-3.26878 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42821 +20 +-3.26878 +11 +6.42808 +21 +-3.26872 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42808 +20 +-3.26872 +11 +6.42795 +21 +-3.26875 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42795 +20 +-3.26875 +11 +6.42718 +21 +-3.2683 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42718 +20 +-3.2683 +11 +6.42638 +21 +-3.26793 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42638 +20 +-3.26793 +11 +6.40437 +21 +-3.24592 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40437 +20 +-3.24592 +11 +6.39986 +21 +-3.24442 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39986 +20 +-3.24442 +11 +6.39729 +21 +-3.24442 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39729 +20 +-3.24442 +11 +6.39459 +21 +-3.24577 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39459 +20 +-3.24577 +11 +6.3934 +21 +-3.24697 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3934 +20 +-3.24697 +11 +6.39205 +21 +-3.24966 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39205 +20 +-3.24966 +11 +6.39205 +21 +-3.25764 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39205 +20 +-3.25764 +11 +6.3934 +21 +-3.26034 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3934 +20 +-3.26034 +11 +6.39493 +21 +-3.26188 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39493 +20 +-3.26188 +11 +6.39552 +21 +-3.26272 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39552 +20 +-3.26272 +11 +6.3957 +21 +-3.26473 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3957 +20 +-3.26473 +11 +6.39454 +21 +-3.26638 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39454 +20 +-3.26638 +11 +6.39259 +21 +-3.26691 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39259 +20 +-3.26691 +11 +6.39076 +21 +-3.26605 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39076 +20 +-3.26605 +11 +6.38888 +21 +-3.26418 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38888 +20 +-3.26418 +11 +6.38837 +21 +-3.26346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38837 +20 +-3.26346 +11 +6.38833 +21 +-3.26341 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38833 +20 +-3.26341 +11 +6.38645 +21 +-3.25966 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38645 +20 +-3.25966 +11 +6.38616 +21 +-3.25868 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38616 +20 +-3.25868 +11 +6.3862 +21 +-3.25851 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3862 +20 +-3.25851 +11 +6.38614 +21 +-3.25834 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38614 +20 +-3.25834 +11 +6.38614 +21 +-3.24897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38614 +20 +-3.24897 +11 +6.38632 +21 +-3.24796 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38632 +20 +-3.24796 +11 +6.38643 +21 +-3.24782 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38643 +20 +-3.24782 +11 +6.38645 +21 +-3.24765 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38645 +20 +-3.24765 +11 +6.38833 +21 +-3.2439 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38833 +20 +-3.2439 +11 +6.38885 +21 +-3.24319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38885 +20 +-3.24319 +11 +6.38888 +21 +-3.24313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38888 +20 +-3.24313 +11 +6.39076 +21 +-3.24126 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39076 +20 +-3.24126 +11 +6.39148 +21 +-3.24075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39148 +20 +-3.24075 +11 +6.39152 +21 +-3.2407 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39152 +20 +-3.2407 +11 +6.39527 +21 +-3.23883 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39527 +20 +-3.23883 +11 +6.39626 +21 +-3.23853 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39626 +20 +-3.23853 +11 +6.39643 +21 +-3.23858 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39643 +20 +-3.23858 +11 +6.39659 +21 +-3.23852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.39659 +20 +-3.23852 +11 +6.40034 +21 +-3.23852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40034 +20 +-3.23852 +11 +6.40121 +21 +-3.23867 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47197 +20 +-3.23869 +11 +6.47211 +21 +-3.23881 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47211 +20 +-3.23881 +11 +6.47229 +21 +-3.23883 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47229 +20 +-3.23883 +11 +6.47603 +21 +-3.2407 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47603 +20 +-3.2407 +11 +6.47674 +21 +-3.24123 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47674 +20 +-3.24123 +11 +6.4768 +21 +-3.24126 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4768 +20 +-3.24126 +11 +6.47868 +21 +-3.24313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47868 +20 +-3.24313 +11 +6.47918 +21 +-3.24385 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47918 +20 +-3.24385 +11 +6.47923 +21 +-3.2439 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47923 +20 +-3.2439 +11 +6.4811 +21 +-3.24765 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4811 +20 +-3.24765 +11 +6.4814 +21 +-3.24863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4814 +20 +-3.24863 +11 +6.48136 +21 +-3.2488 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48136 +20 +-3.2488 +11 +6.48142 +21 +-3.24897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48142 +20 +-3.24897 +11 +6.48142 +21 +-3.26022 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48142 +20 +-3.26022 +11 +6.48124 +21 +-3.26123 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48124 +20 +-3.26123 +11 +6.48112 +21 +-3.26136 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48112 +20 +-3.26136 +11 +6.4811 +21 +-3.26154 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4811 +20 +-3.26154 +11 +6.47923 +21 +-3.26529 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47923 +20 +-3.26529 +11 +6.4787 +21 +-3.266 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4787 +20 +-3.266 +11 +6.47868 +21 +-3.26605 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47868 +20 +-3.26605 +11 +6.4768 +21 +-3.26793 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4768 +20 +-3.26793 +11 +6.47596 +21 +-3.26852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47596 +20 +-3.26852 +11 +6.47395 +21 +-3.26869 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47395 +20 +-3.26869 +11 +6.4723 +21 +-3.26753 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4723 +20 +-3.26753 +11 +6.47177 +21 +-3.26558 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47177 +20 +-3.26558 +11 +6.47263 +21 +-3.26375 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47263 +20 +-3.26375 +11 +6.47416 +21 +-3.26222 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47416 +20 +-3.26222 +11 +6.47551 +21 +-3.25952 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47551 +20 +-3.25952 +11 +6.47551 +21 +-3.24966 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47551 +20 +-3.24966 +11 +6.47416 +21 +-3.24697 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47416 +20 +-3.24697 +11 +6.47297 +21 +-3.24577 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47297 +20 +-3.24577 +11 +6.47027 +21 +-3.24442 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47027 +20 +-3.24442 +11 +6.46229 +21 +-3.24442 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46229 +20 +-3.24442 +11 +6.45959 +21 +-3.24577 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45959 +20 +-3.24577 +11 +6.45839 +21 +-3.24697 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45839 +20 +-3.24697 +11 +6.45704 +21 +-3.24966 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45704 +20 +-3.24966 +11 +6.45704 +21 +-3.25459 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45704 +20 +-3.25459 +11 +6.45697 +21 +-3.25503 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45697 +20 +-3.25503 +11 +6.45699 +21 +-3.25516 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45699 +20 +-3.25516 +11 +6.45693 +21 +-3.25527 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45693 +20 +-3.25527 +11 +6.45687 +21 +-3.2556 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45687 +20 +-3.2556 +11 +6.45635 +21 +-3.25621 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45635 +20 +-3.25621 +11 +6.45594 +21 +-3.25689 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45594 +20 +-3.25689 +11 +6.45572 +21 +-3.25697 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45572 +20 +-3.25697 +11 +6.45557 +21 +-3.25715 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45557 +20 +-3.25715 +11 +6.45478 +21 +-3.25729 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45478 +20 +-3.25729 +11 +6.45403 +21 +-3.25754 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45403 +20 +-3.25754 +11 +6.45381 +21 +-3.25746 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45381 +20 +-3.25746 +11 +6.45358 +21 +-3.2575 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45358 +20 +-3.2575 +11 +6.45289 +21 +-3.2571 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45289 +20 +-3.2571 +11 +6.45215 +21 +-3.25681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45215 +20 +-3.25681 +11 +6.44205 +21 +-3.24798 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44205 +20 +-3.24798 +11 +6.44205 +21 +-3.26584 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44205 +20 +-3.26584 +11 +6.44187 +21 +-3.26685 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44187 +20 +-3.26685 +11 +6.44057 +21 +-3.2684 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44057 +20 +-3.2684 +11 +6.43858 +21 +-3.26875 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43858 +20 +-3.26875 +11 +6.43683 +21 +-3.26774 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43683 +20 +-3.26774 +11 +6.43614 +21 +-3.26584 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43614 +20 +-3.26584 +11 +6.43614 +21 +-3.24147 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43614 +20 +-3.24147 +11 +6.43622 +21 +-3.24103 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43622 +20 +-3.24103 +11 +6.4362 +21 +-3.2409 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4362 +20 +-3.2409 +11 +6.43626 +21 +-3.24079 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43626 +20 +-3.24079 +11 +6.43632 +21 +-3.24046 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43632 +20 +-3.24046 +11 +6.43683 +21 +-3.23985 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43683 +20 +-3.23985 +11 +6.43724 +21 +-3.23917 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43724 +20 +-3.23917 +11 +6.43747 +21 +-3.23909 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43747 +20 +-3.23909 +11 +6.43762 +21 +-3.23891 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43762 +20 +-3.23891 +11 +6.4384 +21 +-3.23877 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4384 +20 +-3.23877 +11 +6.43915 +21 +-3.23852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43915 +20 +-3.23852 +11 +6.43937 +21 +-3.2386 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43937 +20 +-3.2386 +11 +6.43961 +21 +-3.23856 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43961 +20 +-3.23856 +11 +6.4403 +21 +-3.23896 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4403 +20 +-3.23896 +11 +6.44104 +21 +-3.23925 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44104 +20 +-3.23925 +11 +6.45127 +21 +-3.2482 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45127 +20 +-3.2482 +11 +6.45132 +21 +-3.24796 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45132 +20 +-3.24796 +11 +6.45143 +21 +-3.24782 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45143 +20 +-3.24782 +11 +6.45145 +21 +-3.24765 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45145 +20 +-3.24765 +11 +6.45333 +21 +-3.2439 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45333 +20 +-3.2439 +11 +6.45385 +21 +-3.24319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45385 +20 +-3.24319 +11 +6.45388 +21 +-3.24313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45388 +20 +-3.24313 +11 +6.45575 +21 +-3.24126 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45575 +20 +-3.24126 +11 +6.45648 +21 +-3.24075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45648 +20 +-3.24075 +11 +6.45652 +21 +-3.2407 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.45652 +20 +-3.2407 +11 +6.46027 +21 +-3.23883 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46027 +20 +-3.23883 +11 +6.46125 +21 +-3.23853 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46125 +20 +-3.23853 +11 +6.46143 +21 +-3.23858 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46143 +20 +-3.23858 +11 +6.46159 +21 +-3.23852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46159 +20 +-3.23852 +11 +6.47096 +21 +-3.23852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47096 +20 +-3.23852 +11 +6.47197 +21 +-3.23869 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37673 +20 +-3.23917 +11 +6.37742 +21 +-3.24107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37742 +20 +-3.24107 +11 +6.37742 +21 +-3.26356 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37742 +20 +-3.26356 +11 +6.37724 +21 +-3.26457 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37724 +20 +-3.26457 +11 +6.37594 +21 +-3.26612 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37594 +20 +-3.26612 +11 +6.37395 +21 +-3.26647 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37395 +20 +-3.26647 +11 +6.3722 +21 +-3.26546 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3722 +20 +-3.26546 +11 +6.37151 +21 +-3.26356 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37151 +20 +-3.26356 +11 +6.37151 +21 +-3.25527 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37151 +20 +-3.25527 +11 +6.3441 +21 +-3.25527 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3441 +20 +-3.25527 +11 +6.34656 +21 +-3.25773 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34656 +20 +-3.25773 +11 +6.34706 +21 +-3.25845 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34706 +20 +-3.25845 +11 +6.34711 +21 +-3.25849 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34711 +20 +-3.25849 +11 +6.34898 +21 +-3.26224 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34898 +20 +-3.26224 +11 +6.34928 +21 +-3.26323 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34928 +20 +-3.26323 +11 +6.34881 +21 +-3.26519 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34881 +20 +-3.26519 +11 +6.34718 +21 +-3.26639 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34718 +20 +-3.26639 +11 +6.34517 +21 +-3.26627 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34517 +20 +-3.26627 +11 +6.3437 +21 +-3.26488 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3437 +20 +-3.26488 +11 +6.34204 +21 +-3.26156 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34204 +20 +-3.26156 +11 +6.33884 +21 +-3.25836 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33884 +20 +-3.25836 +11 +6.33346 +21 +-3.25477 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33346 +20 +-3.25477 +11 +6.33271 +21 +-3.25406 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33271 +20 +-3.25406 +11 +6.33267 +21 +-3.2539 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33267 +20 +-3.2539 +11 +6.33254 +21 +-3.25379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33254 +20 +-3.25379 +11 +6.33239 +21 +-3.25295 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33239 +20 +-3.25295 +11 +6.33215 +21 +-3.25213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33215 +20 +-3.25213 +11 +6.33222 +21 +-3.25197 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33222 +20 +-3.25197 +11 +6.33219 +21 +-3.2518 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33219 +20 +-3.2518 +11 +6.33261 +21 +-3.25106 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33261 +20 +-3.25106 +11 +6.33296 +21 +-3.25028 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33296 +20 +-3.25028 +11 +6.33311 +21 +-3.2502 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33311 +20 +-3.2502 +11 +6.3332 +21 +-3.25005 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3332 +20 +-3.25005 +11 +6.334 +21 +-3.24976 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.334 +20 +-3.24976 +11 +6.33477 +21 +-3.24938 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33477 +20 +-3.24938 +11 +6.33493 +21 +-3.24942 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33493 +20 +-3.24942 +11 +6.33509 +21 +-3.24936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33509 +20 +-3.24936 +11 +6.37151 +21 +-3.24936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37151 +20 +-3.24936 +11 +6.37151 +21 +-3.24107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37151 +20 +-3.24107 +11 +6.37169 +21 +-3.24006 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37169 +20 +-3.24006 +11 +6.37299 +21 +-3.23851 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37299 +20 +-3.23851 +11 +6.37498 +21 +-3.23816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37498 +20 +-3.23816 +11 +6.37673 +21 +-3.23917 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32321 +20 +-3.18992 +11 +6.32488 +21 +-3.19061 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32488 +20 +-3.19061 +11 +6.32557 +21 +-3.19228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32557 +20 +-3.19228 +11 +6.32557 +21 +-3.25921 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32557 +20 +-3.25921 +11 +6.32488 +21 +-3.26088 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32488 +20 +-3.26088 +11 +6.32321 +21 +-3.26157 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32321 +20 +-3.26157 +11 +6.19486 +21 +-3.26157 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19486 +20 +-3.26157 +11 +6.19319 +21 +-3.26088 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19319 +20 +-3.26088 +11 +6.1925 +21 +-3.25921 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1925 +20 +-3.25921 +11 +6.19319 +21 +-3.25754 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19319 +20 +-3.25754 +11 +6.19486 +21 +-3.25685 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19486 +20 +-3.25685 +11 +6.32085 +21 +-3.25685 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32085 +20 +-3.25685 +11 +6.32085 +21 +-3.19465 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32085 +20 +-3.19465 +11 +6.19486 +21 +-3.19465 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19486 +20 +-3.19465 +11 +6.19319 +21 +-3.19395 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19319 +20 +-3.19395 +11 +6.1925 +21 +-3.19228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1925 +20 +-3.19228 +11 +6.19319 +21 +-3.19061 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19319 +20 +-3.19061 +11 +6.19486 +21 +-3.18992 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19486 +20 +-3.18992 +11 +6.32321 +21 +-3.18992 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34038 +20 +-3.15286 +11 +6.34051 +21 +-3.15284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34051 +20 +-3.15284 +11 +6.34063 +21 +-3.15291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34063 +20 +-3.15291 +11 +6.34076 +21 +-3.1529 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34076 +20 +-3.1529 +11 +6.34139 +21 +-3.15334 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34139 +20 +-3.15334 +11 +6.34209 +21 +-3.15366 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34209 +20 +-3.15366 +11 +6.35039 +21 +-3.16196 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35039 +20 +-3.16196 +11 +6.35098 +21 +-3.1628 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35098 +20 +-3.1628 +11 +6.35115 +21 +-3.16481 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35115 +20 +-3.16481 +11 +6.34999 +21 +-3.16647 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34999 +20 +-3.16647 +11 +6.34804 +21 +-3.16699 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34804 +20 +-3.16699 +11 +6.34621 +21 +-3.16614 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34621 +20 +-3.16614 +11 +6.34295 +21 +-3.16288 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34295 +20 +-3.16288 +11 +6.34295 +21 +-3.23075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34295 +20 +-3.23075 +11 +6.34295 +21 +-3.24575 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34295 +20 +-3.24575 +11 +6.34277 +21 +-3.24676 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34277 +20 +-3.24676 +11 +6.34148 +21 +-3.24831 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34148 +20 +-3.24831 +11 +6.33949 +21 +-3.24866 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33949 +20 +-3.24866 +11 +6.33774 +21 +-3.24765 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33774 +20 +-3.24765 +11 +6.33705 +21 +-3.24575 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33705 +20 +-3.24575 +11 +6.33705 +21 +-3.23075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33705 +20 +-3.23075 +11 +6.33705 +21 +-3.16288 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33705 +20 +-3.16288 +11 +6.33379 +21 +-3.16614 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33379 +20 +-3.16614 +11 +6.33295 +21 +-3.16672 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33295 +20 +-3.16672 +11 +6.33094 +21 +-3.1669 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33094 +20 +-3.1669 +11 +6.32928 +21 +-3.16574 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32928 +20 +-3.16574 +11 +6.32876 +21 +-3.16379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32876 +20 +-3.16379 +11 +6.32961 +21 +-3.16196 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32961 +20 +-3.16196 +11 +6.33791 +21 +-3.15366 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33791 +20 +-3.15366 +11 +6.33823 +21 +-3.15344 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33823 +20 +-3.15344 +11 +6.33831 +21 +-3.15333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33831 +20 +-3.15333 +11 +6.33843 +21 +-3.1533 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33843 +20 +-3.1533 +11 +6.33844 +21 +-3.15329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33844 +20 +-3.15329 +11 +6.33852 +21 +-3.15319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33852 +20 +-3.15319 +11 +6.3386 +21 +-3.15318 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3386 +20 +-3.15318 +11 +6.33875 +21 +-3.15307 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33875 +20 +-3.15307 +11 +6.33952 +21 +-3.15301 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33952 +20 +-3.15301 +11 +6.34026 +21 +-3.15281 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34026 +20 +-3.15281 +11 +6.34038 +21 +-3.15286 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04322 +20 +-3.19303 +11 +6.04477 +21 +-3.19433 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04477 +20 +-3.19433 +11 +6.04512 +21 +-3.19632 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04512 +20 +-3.19632 +11 +6.04411 +21 +-3.19806 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04411 +20 +-3.19806 +11 +6.04221 +21 +-3.19876 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04221 +20 +-3.19876 +11 +6.02613 +21 +-3.19876 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02613 +20 +-3.19876 +11 +6.02516 +21 +-3.20853 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02516 +20 +-3.20853 +11 +6.02589 +21 +-3.20816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02589 +20 +-3.20816 +11 +6.02687 +21 +-3.20787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02687 +20 +-3.20787 +11 +6.02704 +21 +-3.20791 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02704 +20 +-3.20791 +11 +6.02721 +21 +-3.20785 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02721 +20 +-3.20785 +11 +6.03658 +21 +-3.20785 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03658 +20 +-3.20785 +11 +6.03759 +21 +-3.20803 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03759 +20 +-3.20803 +11 +6.03773 +21 +-3.20814 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03773 +20 +-3.20814 +11 +6.0379 +21 +-3.20816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0379 +20 +-3.20816 +11 +6.04165 +21 +-3.21003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04165 +20 +-3.21003 +11 +6.04236 +21 +-3.21056 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04236 +20 +-3.21056 +11 +6.04242 +21 +-3.21059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04242 +20 +-3.21059 +11 +6.0443 +21 +-3.21246 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0443 +20 +-3.21246 +11 +6.0448 +21 +-3.21319 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0448 +20 +-3.21319 +11 +6.04485 +21 +-3.21323 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04485 +20 +-3.21323 +11 +6.04672 +21 +-3.21698 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04672 +20 +-3.21698 +11 +6.04702 +21 +-3.21796 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04702 +20 +-3.21796 +11 +6.04698 +21 +-3.21813 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04698 +20 +-3.21813 +11 +6.04704 +21 +-3.2183 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04704 +20 +-3.2183 +11 +6.04704 +21 +-3.22767 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04704 +20 +-3.22767 +11 +6.04686 +21 +-3.22868 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04686 +20 +-3.22868 +11 +6.04674 +21 +-3.22882 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04674 +20 +-3.22882 +11 +6.04672 +21 +-3.22899 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04672 +20 +-3.22899 +11 +6.04485 +21 +-3.23274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04485 +20 +-3.23274 +11 +6.04432 +21 +-3.23345 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04432 +20 +-3.23345 +11 +6.0443 +21 +-3.23351 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0443 +20 +-3.23351 +11 +6.04242 +21 +-3.23539 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04242 +20 +-3.23539 +11 +6.0417 +21 +-3.23589 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0417 +20 +-3.23589 +11 +6.04165 +21 +-3.23594 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04165 +20 +-3.23594 +11 +6.0379 +21 +-3.23781 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0379 +20 +-3.23781 +11 +6.03692 +21 +-3.23811 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03692 +20 +-3.23811 +11 +6.03675 +21 +-3.23806 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03675 +20 +-3.23806 +11 +6.03658 +21 +-3.23813 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03658 +20 +-3.23813 +11 +6.02721 +21 +-3.23813 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02721 +20 +-3.23813 +11 +6.0262 +21 +-3.23795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0262 +20 +-3.23795 +11 +6.02607 +21 +-3.23783 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02607 +20 +-3.23783 +11 +6.02589 +21 +-3.23781 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02589 +20 +-3.23781 +11 +6.02214 +21 +-3.23594 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02214 +20 +-3.23594 +11 +6.02143 +21 +-3.23541 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02143 +20 +-3.23541 +11 +6.02137 +21 +-3.23539 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02137 +20 +-3.23539 +11 +6.0195 +21 +-3.23351 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0195 +20 +-3.23351 +11 +6.01891 +21 +-3.23267 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01891 +20 +-3.23267 +11 +6.01873 +21 +-3.23066 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01873 +20 +-3.23066 +11 +6.01989 +21 +-3.229 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01989 +20 +-3.229 +11 +6.02184 +21 +-3.22848 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02184 +20 +-3.22848 +11 +6.02367 +21 +-3.22933 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02367 +20 +-3.22933 +11 +6.02521 +21 +-3.23087 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02521 +20 +-3.23087 +11 +6.02791 +21 +-3.23222 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02791 +20 +-3.23222 +11 +6.03589 +21 +-3.23222 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03589 +20 +-3.23222 +11 +6.03858 +21 +-3.23087 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03858 +20 +-3.23087 +11 +6.03978 +21 +-3.22967 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03978 +20 +-3.22967 +11 +6.04113 +21 +-3.22698 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04113 +20 +-3.22698 +11 +6.04113 +21 +-3.219 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04113 +20 +-3.219 +11 +6.03978 +21 +-3.2163 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03978 +20 +-3.2163 +11 +6.03858 +21 +-3.2151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03858 +20 +-3.2151 +11 +6.03589 +21 +-3.21375 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03589 +20 +-3.21375 +11 +6.02791 +21 +-3.21375 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02791 +20 +-3.21375 +11 +6.02521 +21 +-3.2151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02521 +20 +-3.2151 +11 +6.02367 +21 +-3.21664 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02367 +20 +-3.21664 +11 +6.02283 +21 +-3.21723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02283 +20 +-3.21723 +11 +6.02281 +21 +-3.21723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02281 +20 +-3.21723 +11 +6.0228 +21 +-3.21724 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0228 +20 +-3.21724 +11 +6.02181 +21 +-3.21732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02181 +20 +-3.21732 +11 +6.02082 +21 +-3.2174 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02082 +20 +-3.2174 +11 +6.02081 +21 +-3.21739 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02081 +20 +-3.21739 +11 +6.02079 +21 +-3.21739 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02079 +20 +-3.21739 +11 +6.01998 +21 +-3.21681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01998 +20 +-3.21681 +11 +6.01917 +21 +-3.21624 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01917 +20 +-3.21624 +11 +6.01916 +21 +-3.21622 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01916 +20 +-3.21622 +11 +6.01915 +21 +-3.21621 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01915 +20 +-3.21621 +11 +6.0189 +21 +-3.21525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0189 +20 +-3.21525 +11 +6.01864 +21 +-3.21429 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01864 +20 +-3.21429 +11 +6.01865 +21 +-3.21428 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01865 +20 +-3.21428 +11 +6.01865 +21 +-3.21426 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01865 +20 +-3.21426 +11 +6.02052 +21 +-3.19551 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02052 +20 +-3.19551 +11 +6.02056 +21 +-3.19536 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02056 +20 +-3.19536 +11 +6.02055 +21 +-3.19529 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02055 +20 +-3.19529 +11 +6.02061 +21 +-3.19518 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02061 +20 +-3.19518 +11 +6.0208 +21 +-3.19452 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0208 +20 +-3.19452 +11 +6.02125 +21 +-3.19408 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02125 +20 +-3.19408 +11 +6.02156 +21 +-3.19354 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02156 +20 +-3.19354 +11 +6.02195 +21 +-3.1934 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02195 +20 +-3.1934 +11 +6.02225 +21 +-3.19311 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02225 +20 +-3.19311 +11 +6.02287 +21 +-3.19306 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02287 +20 +-3.19306 +11 +6.02346 +21 +-3.19285 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02346 +20 +-3.19285 +11 +6.04221 +21 +-3.19285 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04221 +20 +-3.19285 +11 +6.04322 +21 +-3.19303 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0001 +20 +-3.19303 +11 +6.00023 +21 +-3.19314 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00023 +20 +-3.19314 +11 +6.00041 +21 +-3.19316 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00041 +20 +-3.19316 +11 +6.00416 +21 +-3.19504 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00416 +20 +-3.19504 +11 +6.00487 +21 +-3.19556 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00487 +20 +-3.19556 +11 +6.00493 +21 +-3.19559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00493 +20 +-3.19559 +11 +6.0068 +21 +-3.19746 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0068 +20 +-3.19746 +11 +6.00731 +21 +-3.19819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00731 +20 +-3.19819 +11 +6.00735 +21 +-3.19823 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00735 +20 +-3.19823 +11 +6.00923 +21 +-3.20198 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00923 +20 +-3.20198 +11 +6.00952 +21 +-3.20296 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00952 +20 +-3.20296 +11 +6.00948 +21 +-3.20314 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00948 +20 +-3.20314 +11 +6.00954 +21 +-3.2033 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00954 +20 +-3.2033 +11 +6.00954 +21 +-3.20893 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00954 +20 +-3.20893 +11 +6.00936 +21 +-3.20994 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00936 +20 +-3.20994 +11 +6.00925 +21 +-3.21007 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00925 +20 +-3.21007 +11 +6.00923 +21 +-3.21025 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00923 +20 +-3.21025 +11 +6.00735 +21 +-3.214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00735 +20 +-3.214 +11 +6.00683 +21 +-3.2147 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00683 +20 +-3.2147 +11 +6.0068 +21 +-3.21476 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0068 +20 +-3.21476 +11 +6.00493 +21 +-3.21664 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00493 +20 +-3.21664 +11 +6.0042 +21 +-3.21714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0042 +20 +-3.21714 +11 +6.00416 +21 +-3.21719 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00416 +20 +-3.21719 +11 +6.00041 +21 +-3.21907 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00041 +20 +-3.21907 +11 +5.99943 +21 +-3.21936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99943 +20 +-3.21936 +11 +5.99925 +21 +-3.21932 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99925 +20 +-3.21932 +11 +5.99913 +21 +-3.21936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99913 +20 +-3.21936 +11 +6.00901 +21 +-3.23348 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00901 +20 +-3.23348 +11 +6.00944 +21 +-3.23441 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00944 +20 +-3.23441 +11 +6.00926 +21 +-3.23642 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00926 +20 +-3.23642 +11 +6.00784 +21 +-3.23785 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00784 +20 +-3.23785 +11 +6.00582 +21 +-3.23802 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00582 +20 +-3.23802 +11 +6.00417 +21 +-3.23687 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00417 +20 +-3.23687 +11 +5.99193 +21 +-3.21938 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99193 +20 +-3.21938 +11 +5.98704 +21 +-3.21938 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98704 +20 +-3.21938 +11 +5.98704 +21 +-3.23517 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98704 +20 +-3.23517 +11 +5.98687 +21 +-3.23618 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98687 +20 +-3.23618 +11 +5.98557 +21 +-3.23773 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98557 +20 +-3.23773 +11 +5.98358 +21 +-3.23808 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98358 +20 +-3.23808 +11 +5.98183 +21 +-3.23707 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98183 +20 +-3.23707 +11 +5.98114 +21 +-3.23517 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98114 +20 +-3.23517 +11 +5.98114 +21 +-3.1958 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98114 +20 +-3.1958 +11 +5.98121 +21 +-3.19542 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98121 +20 +-3.19542 +11 +5.98118 +21 +-3.19529 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98118 +20 +-3.19529 +11 +5.98125 +21 +-3.19518 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98125 +20 +-3.19518 +11 +5.98132 +21 +-3.19479 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98132 +20 +-3.19479 +11 +5.98181 +21 +-3.1942 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98181 +20 +-3.1942 +11 +5.98219 +21 +-3.19354 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98219 +20 +-3.19354 +11 +5.98244 +21 +-3.19345 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98244 +20 +-3.19345 +11 +5.98261 +21 +-3.19325 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98261 +20 +-3.19325 +11 +5.98337 +21 +-3.19311 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98337 +20 +-3.19311 +11 +5.98409 +21 +-3.19285 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98409 +20 +-3.19285 +11 +5.99909 +21 +-3.19285 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99909 +20 +-3.19285 +11 +6.0001 +21 +-3.19303 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98704 +20 +-3.21347 +11 +5.99839 +21 +-3.21347 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99839 +20 +-3.21347 +11 +6.00109 +21 +-3.21212 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00109 +20 +-3.21212 +11 +6.00229 +21 +-3.21093 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00229 +20 +-3.21093 +11 +6.00364 +21 +-3.20823 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00364 +20 +-3.20823 +11 +6.00364 +21 +-3.204 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00364 +20 +-3.204 +11 +6.00229 +21 +-3.2013 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00229 +20 +-3.2013 +11 +6.00109 +21 +-3.2001 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00109 +20 +-3.2001 +11 +5.99839 +21 +-3.19876 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99839 +20 +-3.19876 +11 +5.98704 +21 +-3.19876 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98704 +20 +-3.19876 +11 +5.98704 +21 +-3.21347 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49921 +20 +-3.15892 +11 +6.50088 +21 +-3.15961 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50088 +20 +-3.15961 +11 +6.50157 +21 +-3.16128 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50157 +20 +-3.16128 +11 +6.50157 +21 +-3.22821 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50157 +20 +-3.22821 +11 +6.50088 +21 +-3.22988 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50088 +20 +-3.22988 +11 +6.49921 +21 +-3.23057 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49921 +20 +-3.23057 +11 +6.37086 +21 +-3.23057 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37086 +20 +-3.23057 +11 +6.36919 +21 +-3.22988 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36919 +20 +-3.22988 +11 +6.3685 +21 +-3.22821 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3685 +20 +-3.22821 +11 +6.36919 +21 +-3.22654 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36919 +20 +-3.22654 +11 +6.37086 +21 +-3.22585 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37086 +20 +-3.22585 +11 +6.49685 +21 +-3.22585 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49685 +20 +-3.22585 +11 +6.49685 +21 +-3.16365 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49685 +20 +-3.16365 +11 +6.37086 +21 +-3.16365 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37086 +20 +-3.16365 +11 +6.36919 +21 +-3.16295 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36919 +20 +-3.16295 +11 +6.3685 +21 +-3.16128 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3685 +20 +-3.16128 +11 +6.36919 +21 +-3.15961 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36919 +20 +-3.15961 +11 +6.37086 +21 +-3.15892 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37086 +20 +-3.15892 +11 +6.49921 +21 +-3.15892 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84819 +20 +-3.16232 +11 +5.84974 +21 +-3.16362 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84974 +20 +-3.16362 +11 +5.85009 +21 +-3.16561 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85009 +20 +-3.16561 +11 +5.84908 +21 +-3.16736 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84908 +20 +-3.16736 +11 +5.84718 +21 +-3.16805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84718 +20 +-3.16805 +11 +5.84038 +21 +-3.16805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84038 +20 +-3.16805 +11 +5.83768 +21 +-3.1694 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83768 +20 +-3.1694 +11 +5.83636 +21 +-3.17072 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83636 +20 +-3.17072 +11 +5.83305 +21 +-3.17568 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83305 +20 +-3.17568 +11 +5.83232 +21 +-3.1786 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83232 +20 +-3.1786 +11 +5.83461 +21 +-3.17745 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83461 +20 +-3.17745 +11 +5.8356 +21 +-3.17716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8356 +20 +-3.17716 +11 +5.83577 +21 +-3.1772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83577 +20 +-3.1772 +11 +5.83594 +21 +-3.17714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83594 +20 +-3.17714 +11 +5.84343 +21 +-3.17714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84343 +20 +-3.17714 +11 +5.84444 +21 +-3.17732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84444 +20 +-3.17732 +11 +5.84458 +21 +-3.17743 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84458 +20 +-3.17743 +11 +5.84476 +21 +-3.17745 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84476 +20 +-3.17745 +11 +5.8485 +21 +-3.17933 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8485 +20 +-3.17933 +11 +5.84921 +21 +-3.17985 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84921 +20 +-3.17985 +11 +5.84927 +21 +-3.17988 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84927 +20 +-3.17988 +11 +5.85115 +21 +-3.18175 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85115 +20 +-3.18175 +11 +5.85165 +21 +-3.18248 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85165 +20 +-3.18248 +11 +5.8517 +21 +-3.18252 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8517 +20 +-3.18252 +11 +5.85357 +21 +-3.18627 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85357 +20 +-3.18627 +11 +5.85387 +21 +-3.18725 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85387 +20 +-3.18725 +11 +5.85383 +21 +-3.18742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85383 +20 +-3.18742 +11 +5.85389 +21 +-3.18759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85389 +20 +-3.18759 +11 +5.85389 +21 +-3.19696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85389 +20 +-3.19696 +11 +5.85371 +21 +-3.19797 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85371 +20 +-3.19797 +11 +5.85359 +21 +-3.19811 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85359 +20 +-3.19811 +11 +5.85357 +21 +-3.19829 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85357 +20 +-3.19829 +11 +5.8517 +21 +-3.20203 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8517 +20 +-3.20203 +11 +5.85117 +21 +-3.20274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85117 +20 +-3.20274 +11 +5.85115 +21 +-3.2028 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85115 +20 +-3.2028 +11 +5.84927 +21 +-3.20468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84927 +20 +-3.20468 +11 +5.84855 +21 +-3.20518 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84855 +20 +-3.20518 +11 +5.8485 +21 +-3.20523 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8485 +20 +-3.20523 +11 +5.84476 +21 +-3.2071 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84476 +20 +-3.2071 +11 +5.84377 +21 +-3.2074 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84377 +20 +-3.2074 +11 +5.8436 +21 +-3.20736 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8436 +20 +-3.20736 +11 +5.84343 +21 +-3.20742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84343 +20 +-3.20742 +11 +5.83594 +21 +-3.20742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83594 +20 +-3.20742 +11 +5.83493 +21 +-3.20724 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83493 +20 +-3.20724 +11 +5.83479 +21 +-3.20712 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83479 +20 +-3.20712 +11 +5.83461 +21 +-3.2071 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83461 +20 +-3.2071 +11 +5.83087 +21 +-3.20523 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83087 +20 +-3.20523 +11 +5.83016 +21 +-3.2047 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83016 +20 +-3.2047 +11 +5.8301 +21 +-3.20468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8301 +20 +-3.20468 +11 +5.82822 +21 +-3.2028 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82822 +20 +-3.2028 +11 +5.82772 +21 +-3.20208 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82772 +20 +-3.20208 +11 +5.82767 +21 +-3.20203 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82767 +20 +-3.20203 +11 +5.8258 +21 +-3.19829 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8258 +20 +-3.19829 +11 +5.8255 +21 +-3.1973 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8255 +20 +-3.1973 +11 +5.82554 +21 +-3.19713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82554 +20 +-3.19713 +11 +5.82548 +21 +-3.19696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82548 +20 +-3.19696 +11 +5.82548 +21 +-3.18197 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82548 +20 +-3.18197 +11 +5.82559 +21 +-3.18139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82559 +20 +-3.18139 +11 +5.82557 +21 +-3.18125 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82557 +20 +-3.18125 +11 +5.82745 +21 +-3.17375 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82745 +20 +-3.17375 +11 +5.82785 +21 +-3.17285 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82785 +20 +-3.17285 +11 +5.82785 +21 +-3.17283 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82785 +20 +-3.17283 +11 +5.8316 +21 +-3.16721 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8316 +20 +-3.16721 +11 +5.83191 +21 +-3.16688 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83191 +20 +-3.16688 +11 +5.83197 +21 +-3.16676 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83197 +20 +-3.16676 +11 +5.83385 +21 +-3.16488 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83385 +20 +-3.16488 +11 +5.83457 +21 +-3.16437 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83457 +20 +-3.16437 +11 +5.83461 +21 +-3.16433 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83461 +20 +-3.16433 +11 +5.83836 +21 +-3.16245 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83836 +20 +-3.16245 +11 +5.83935 +21 +-3.16216 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83935 +20 +-3.16216 +11 +5.83952 +21 +-3.1622 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83952 +20 +-3.1622 +11 +5.83969 +21 +-3.16214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83969 +20 +-3.16214 +11 +5.84718 +21 +-3.16214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84718 +20 +-3.16214 +11 +5.84819 +21 +-3.16232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83394 +20 +-3.18439 +11 +5.83274 +21 +-3.18559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83274 +20 +-3.18559 +11 +5.83139 +21 +-3.18829 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83139 +20 +-3.18829 +11 +5.83139 +21 +-3.19627 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83139 +20 +-3.19627 +11 +5.83274 +21 +-3.19897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83274 +20 +-3.19897 +11 +5.83394 +21 +-3.20016 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83394 +20 +-3.20016 +11 +5.83663 +21 +-3.20151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83663 +20 +-3.20151 +11 +5.84274 +21 +-3.20151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84274 +20 +-3.20151 +11 +5.84544 +21 +-3.20016 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84544 +20 +-3.20016 +11 +5.84663 +21 +-3.19897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84663 +20 +-3.19897 +11 +5.84798 +21 +-3.19627 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84798 +20 +-3.19627 +11 +5.84798 +21 +-3.18829 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84798 +20 +-3.18829 +11 +5.84663 +21 +-3.18559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84663 +20 +-3.18559 +11 +5.84544 +21 +-3.18439 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84544 +20 +-3.18439 +11 +5.84274 +21 +-3.18304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84274 +20 +-3.18304 +11 +5.83663 +21 +-3.18304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83663 +20 +-3.18304 +11 +5.83394 +21 +-3.18439 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80681 +20 +-3.16229 +11 +5.80687 +21 +-3.16229 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80687 +20 +-3.16229 +11 +5.8125 +21 +-3.16417 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8125 +20 +-3.16417 +11 +5.8134 +21 +-3.16466 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8134 +20 +-3.16466 +11 +5.81349 +21 +-3.16481 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81349 +20 +-3.16481 +11 +5.81365 +21 +-3.16488 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81365 +20 +-3.16488 +11 +5.81553 +21 +-3.16676 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81553 +20 +-3.16676 +11 +5.81611 +21 +-3.1676 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81611 +20 +-3.1676 +11 +5.81629 +21 +-3.16961 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81629 +20 +-3.16961 +11 +5.81513 +21 +-3.17126 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81513 +20 +-3.17126 +11 +5.81318 +21 +-3.17178 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81318 +20 +-3.17178 +11 +5.81135 +21 +-3.17093 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81135 +20 +-3.17093 +11 +5.80997 +21 +-3.16955 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80997 +20 +-3.16955 +11 +5.80546 +21 +-3.16805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80546 +20 +-3.16805 +11 +5.80267 +21 +-3.16805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80267 +20 +-3.16805 +11 +5.79816 +21 +-3.16955 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79816 +20 +-3.16955 +11 +5.79524 +21 +-3.17247 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79524 +20 +-3.17247 +11 +5.79373 +21 +-3.1755 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79373 +20 +-3.1755 +11 +5.79202 +21 +-3.18233 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79202 +20 +-3.18233 +11 +5.79202 +21 +-3.18723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79202 +20 +-3.18723 +11 +5.79373 +21 +-3.19406 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79373 +20 +-3.19406 +11 +5.79524 +21 +-3.19709 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79524 +20 +-3.19709 +11 +5.79816 +21 +-3.20001 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79816 +20 +-3.20001 +11 +5.80267 +21 +-3.20151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80267 +20 +-3.20151 +11 +5.80546 +21 +-3.20151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80546 +20 +-3.20151 +11 +5.80997 +21 +-3.20001 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80997 +20 +-3.20001 +11 +5.81135 +21 +-3.19863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81135 +20 +-3.19863 +11 +5.81219 +21 +-3.19804 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81219 +20 +-3.19804 +11 +5.8142 +21 +-3.19786 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8142 +20 +-3.19786 +11 +5.81586 +21 +-3.19902 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81586 +20 +-3.19902 +11 +5.81638 +21 +-3.20097 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81638 +20 +-3.20097 +11 +5.81553 +21 +-3.2028 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81553 +20 +-3.2028 +11 +5.81365 +21 +-3.20468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81365 +20 +-3.20468 +11 +5.81281 +21 +-3.20527 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81281 +20 +-3.20527 +11 +5.81264 +21 +-3.20528 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81264 +20 +-3.20528 +11 +5.8125 +21 +-3.20539 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8125 +20 +-3.20539 +11 +5.80687 +21 +-3.20727 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80687 +20 +-3.20727 +11 +5.806 +21 +-3.20739 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.806 +20 +-3.20739 +11 +5.80594 +21 +-3.20742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80594 +20 +-3.20742 +11 +5.80219 +21 +-3.20742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80219 +20 +-3.20742 +11 +5.80132 +21 +-3.20726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80132 +20 +-3.20726 +11 +5.80126 +21 +-3.20727 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80126 +20 +-3.20727 +11 +5.79563 +21 +-3.20539 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79563 +20 +-3.20539 +11 +5.79473 +21 +-3.2049 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79473 +20 +-3.2049 +11 +5.79464 +21 +-3.20475 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79464 +20 +-3.20475 +11 +5.79448 +21 +-3.20468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79448 +20 +-3.20468 +11 +5.79073 +21 +-3.20093 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79073 +20 +-3.20093 +11 +5.79022 +21 +-3.2002 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79022 +20 +-3.2002 +11 +5.79017 +21 +-3.20016 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79017 +20 +-3.20016 +11 +5.7883 +21 +-3.19641 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7883 +20 +-3.19641 +11 +5.78815 +21 +-3.19592 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78815 +20 +-3.19592 +11 +5.78808 +21 +-3.19581 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78808 +20 +-3.19581 +11 +5.7862 +21 +-3.18831 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7862 +20 +-3.18831 +11 +5.78616 +21 +-3.18772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78616 +20 +-3.18772 +11 +5.78611 +21 +-3.18759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78611 +20 +-3.18759 +11 +5.78611 +21 +-3.18197 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78611 +20 +-3.18197 +11 +5.78622 +21 +-3.18139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78622 +20 +-3.18139 +11 +5.7862 +21 +-3.18125 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7862 +20 +-3.18125 +11 +5.78808 +21 +-3.17375 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78808 +20 +-3.17375 +11 +5.78828 +21 +-3.17329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78828 +20 +-3.17329 +11 +5.7883 +21 +-3.17315 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7883 +20 +-3.17315 +11 +5.79017 +21 +-3.1694 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79017 +20 +-3.1694 +11 +5.7907 +21 +-3.16869 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7907 +20 +-3.16869 +11 +5.79073 +21 +-3.16863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79073 +20 +-3.16863 +11 +5.79448 +21 +-3.16488 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79448 +20 +-3.16488 +11 +5.79532 +21 +-3.16429 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79532 +20 +-3.16429 +11 +5.79549 +21 +-3.16428 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79549 +20 +-3.16428 +11 +5.79563 +21 +-3.16417 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79563 +20 +-3.16417 +11 +5.80126 +21 +-3.16229 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80126 +20 +-3.16229 +11 +5.80213 +21 +-3.16216 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80213 +20 +-3.16216 +11 +5.80219 +21 +-3.16214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80219 +20 +-3.16214 +11 +5.80594 +21 +-3.16214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80594 +20 +-3.16214 +11 +5.80681 +21 +-3.16229 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92876 +20 +-3.17379 +11 +5.92945 +21 +-3.17546 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92945 +20 +-3.17546 +11 +5.92945 +21 +-3.19603 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92945 +20 +-3.19603 +11 +5.92876 +21 +-3.1977 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92876 +20 +-3.1977 +11 +5.92709 +21 +-3.1984 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92709 +20 +-3.1984 +11 +5.92542 +21 +-3.1977 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92542 +20 +-3.1977 +11 +5.92472 +21 +-3.19603 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92472 +20 +-3.19603 +11 +5.92472 +21 +-3.17546 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92472 +20 +-3.17546 +11 +5.92542 +21 +-3.17379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92542 +20 +-3.17379 +11 +5.92709 +21 +-3.1731 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92709 +20 +-3.1731 +11 +5.92876 +21 +-3.17379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87088 +20 +-3.17379 +11 +5.87157 +21 +-3.17546 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87157 +20 +-3.17546 +11 +5.87157 +21 +-3.19603 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87157 +20 +-3.19603 +11 +5.87088 +21 +-3.1977 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87088 +20 +-3.1977 +11 +5.86921 +21 +-3.1984 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86921 +20 +-3.1984 +11 +5.86754 +21 +-3.1977 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86754 +20 +-3.1977 +11 +5.86685 +21 +-3.19603 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86685 +20 +-3.19603 +11 +5.86685 +21 +-3.17546 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86685 +20 +-3.17546 +11 +5.86754 +21 +-3.17379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86754 +20 +-3.17379 +11 +5.86921 +21 +-3.1731 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86921 +20 +-3.1731 +11 +5.87088 +21 +-3.17379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58054 +20 +-3.06465 +11 +6.58221 +21 +-3.06535 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58221 +20 +-3.06535 +11 +6.5829 +21 +-3.06702 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5829 +20 +-3.06702 +11 +6.5829 +21 +-3.19536 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5829 +20 +-3.19536 +11 +6.58221 +21 +-3.19703 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58221 +20 +-3.19703 +11 +6.58054 +21 +-3.19772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58054 +20 +-3.19772 +11 +6.57887 +21 +-3.19703 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57887 +20 +-3.19703 +11 +6.57818 +21 +-3.19536 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57818 +20 +-3.19536 +11 +6.57818 +21 +-3.06938 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57818 +20 +-3.06938 +11 +6.51597 +21 +-3.06938 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51597 +20 +-3.06938 +11 +6.51597 +21 +-3.19536 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51597 +20 +-3.19536 +11 +6.51528 +21 +-3.19703 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51528 +20 +-3.19703 +11 +6.51361 +21 +-3.19772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51361 +20 +-3.19772 +11 +6.51194 +21 +-3.19703 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51194 +20 +-3.19703 +11 +6.51125 +21 +-3.19536 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51125 +20 +-3.19536 +11 +6.51125 +21 +-3.06702 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51125 +20 +-3.06702 +11 +6.51194 +21 +-3.06535 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51194 +20 +-3.06535 +11 +6.51361 +21 +-3.06465 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51361 +20 +-3.06465 +11 +6.58054 +21 +-3.06465 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16444 +20 +-3.14807 +11 +6.16458 +21 +-3.14818 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16458 +20 +-3.14818 +11 +6.16476 +21 +-3.1482 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16476 +20 +-3.1482 +11 +6.1685 +21 +-3.15008 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1685 +20 +-3.15008 +11 +6.16921 +21 +-3.1506 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16921 +20 +-3.1506 +11 +6.16927 +21 +-3.15063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16927 +20 +-3.15063 +11 +6.17115 +21 +-3.1525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17115 +20 +-3.1525 +11 +6.17165 +21 +-3.15323 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17165 +20 +-3.15323 +11 +6.1717 +21 +-3.15327 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1717 +20 +-3.15327 +11 +6.17357 +21 +-3.15702 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17357 +20 +-3.15702 +11 +6.17387 +21 +-3.158 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17387 +20 +-3.158 +11 +6.17383 +21 +-3.15817 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17383 +20 +-3.15817 +11 +6.17389 +21 +-3.15834 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17389 +20 +-3.15834 +11 +6.17389 +21 +-3.17334 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17389 +20 +-3.17334 +11 +6.17378 +21 +-3.17392 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17378 +20 +-3.17392 +11 +6.1738 +21 +-3.17406 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1738 +20 +-3.17406 +11 +6.17192 +21 +-3.18155 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17192 +20 +-3.18155 +11 +6.17152 +21 +-3.18246 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17152 +20 +-3.18246 +11 +6.17152 +21 +-3.18248 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17152 +20 +-3.18248 +11 +6.16777 +21 +-3.1881 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16777 +20 +-3.1881 +11 +6.16746 +21 +-3.18843 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16746 +20 +-3.18843 +11 +6.1674 +21 +-3.18855 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1674 +20 +-3.18855 +11 +6.16552 +21 +-3.19042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16552 +20 +-3.19042 +11 +6.1648 +21 +-3.19093 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1648 +20 +-3.19093 +11 +6.16476 +21 +-3.19098 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16476 +20 +-3.19098 +11 +6.16101 +21 +-3.19285 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16101 +20 +-3.19285 +11 +6.16002 +21 +-3.19315 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16002 +20 +-3.19315 +11 +6.15985 +21 +-3.1931 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15985 +20 +-3.1931 +11 +6.15969 +21 +-3.19316 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15969 +20 +-3.19316 +11 +6.15219 +21 +-3.19316 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15219 +20 +-3.19316 +11 +6.15118 +21 +-3.19299 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15118 +20 +-3.19299 +11 +6.14963 +21 +-3.19169 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14963 +20 +-3.19169 +11 +6.14928 +21 +-3.1897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14928 +20 +-3.1897 +11 +6.15029 +21 +-3.18795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15029 +20 +-3.18795 +11 +6.15219 +21 +-3.18726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15219 +20 +-3.18726 +11 +6.15899 +21 +-3.18726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15899 +20 +-3.18726 +11 +6.16169 +21 +-3.18591 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16169 +20 +-3.18591 +11 +6.16301 +21 +-3.18458 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16301 +20 +-3.18458 +11 +6.16632 +21 +-3.17963 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16632 +20 +-3.17963 +11 +6.16705 +21 +-3.17671 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16705 +20 +-3.17671 +11 +6.16476 +21 +-3.17785 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16476 +20 +-3.17785 +11 +6.16377 +21 +-3.17815 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16377 +20 +-3.17815 +11 +6.1636 +21 +-3.17811 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1636 +20 +-3.17811 +11 +6.16343 +21 +-3.17817 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16343 +20 +-3.17817 +11 +6.15594 +21 +-3.17817 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15594 +20 +-3.17817 +11 +6.15493 +21 +-3.17799 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15493 +20 +-3.17799 +11 +6.15479 +21 +-3.17787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15479 +20 +-3.17787 +11 +6.15461 +21 +-3.17785 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15461 +20 +-3.17785 +11 +6.15087 +21 +-3.17598 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15087 +20 +-3.17598 +11 +6.15016 +21 +-3.17545 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15016 +20 +-3.17545 +11 +6.1501 +21 +-3.17543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1501 +20 +-3.17543 +11 +6.14822 +21 +-3.17355 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14822 +20 +-3.17355 +11 +6.14772 +21 +-3.17283 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14772 +20 +-3.17283 +11 +6.14767 +21 +-3.17278 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14767 +20 +-3.17278 +11 +6.1458 +21 +-3.16904 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1458 +20 +-3.16904 +11 +6.1455 +21 +-3.16805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1455 +20 +-3.16805 +11 +6.14554 +21 +-3.16788 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14554 +20 +-3.16788 +11 +6.14548 +21 +-3.16771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14548 +20 +-3.16771 +11 +6.14548 +21 +-3.15834 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14548 +20 +-3.15834 +11 +6.14566 +21 +-3.15733 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14566 +20 +-3.15733 +11 +6.14578 +21 +-3.1572 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14578 +20 +-3.1572 +11 +6.1458 +21 +-3.15702 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1458 +20 +-3.15702 +11 +6.14767 +21 +-3.15327 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14767 +20 +-3.15327 +11 +6.1482 +21 +-3.15256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1482 +20 +-3.15256 +11 +6.14822 +21 +-3.1525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14822 +20 +-3.1525 +11 +6.1501 +21 +-3.15063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1501 +20 +-3.15063 +11 +6.15082 +21 +-3.15012 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15082 +20 +-3.15012 +11 +6.15087 +21 +-3.15008 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15087 +20 +-3.15008 +11 +6.15461 +21 +-3.1482 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15461 +20 +-3.1482 +11 +6.1556 +21 +-3.14791 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1556 +20 +-3.14791 +11 +6.15577 +21 +-3.14795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15577 +20 +-3.14795 +11 +6.15594 +21 +-3.14789 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15594 +20 +-3.14789 +11 +6.16343 +21 +-3.14789 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16343 +20 +-3.14789 +11 +6.16444 +21 +-3.14807 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15394 +20 +-3.15514 +11 +6.15274 +21 +-3.15634 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15274 +20 +-3.15634 +11 +6.15139 +21 +-3.15904 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15139 +20 +-3.15904 +11 +6.15139 +21 +-3.16702 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15139 +20 +-3.16702 +11 +6.15274 +21 +-3.16972 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15274 +20 +-3.16972 +11 +6.15394 +21 +-3.17091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15394 +20 +-3.17091 +11 +6.15663 +21 +-3.17226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15663 +20 +-3.17226 +11 +6.16274 +21 +-3.17226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16274 +20 +-3.17226 +11 +6.16543 +21 +-3.17091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16543 +20 +-3.17091 +11 +6.16663 +21 +-3.16972 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16663 +20 +-3.16972 +11 +6.16798 +21 +-3.16702 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16798 +20 +-3.16702 +11 +6.16798 +21 +-3.15904 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16798 +20 +-3.15904 +11 +6.16663 +21 +-3.15634 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16663 +20 +-3.15634 +11 +6.16543 +21 +-3.15514 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16543 +20 +-3.15514 +11 +6.16274 +21 +-3.15379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16274 +20 +-3.15379 +11 +6.15663 +21 +-3.15379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15663 +20 +-3.15379 +11 +6.15394 +21 +-3.15514 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12681 +20 +-3.14804 +11 +6.12687 +21 +-3.14804 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12687 +20 +-3.14804 +11 +6.1325 +21 +-3.14992 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1325 +20 +-3.14992 +11 +6.1334 +21 +-3.1504 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1334 +20 +-3.1504 +11 +6.13349 +21 +-3.15055 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13349 +20 +-3.15055 +11 +6.13365 +21 +-3.15063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13365 +20 +-3.15063 +11 +6.13553 +21 +-3.1525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13553 +20 +-3.1525 +11 +6.13611 +21 +-3.15334 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13611 +20 +-3.15334 +11 +6.13629 +21 +-3.15536 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13629 +20 +-3.15536 +11 +6.13513 +21 +-3.15701 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13513 +20 +-3.15701 +11 +6.13318 +21 +-3.15753 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13318 +20 +-3.15753 +11 +6.13135 +21 +-3.15668 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13135 +20 +-3.15668 +11 +6.12997 +21 +-3.1553 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12997 +20 +-3.1553 +11 +6.12546 +21 +-3.15379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12546 +20 +-3.15379 +11 +6.12267 +21 +-3.15379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12267 +20 +-3.15379 +11 +6.11816 +21 +-3.1553 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11816 +20 +-3.1553 +11 +6.11524 +21 +-3.15822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11524 +20 +-3.15822 +11 +6.11373 +21 +-3.16125 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11373 +20 +-3.16125 +11 +6.11202 +21 +-3.16808 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11202 +20 +-3.16808 +11 +6.11202 +21 +-3.17298 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11202 +20 +-3.17298 +11 +6.11373 +21 +-3.17981 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11373 +20 +-3.17981 +11 +6.11524 +21 +-3.18284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11524 +20 +-3.18284 +11 +6.11816 +21 +-3.18576 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11816 +20 +-3.18576 +11 +6.12267 +21 +-3.18726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12267 +20 +-3.18726 +11 +6.12546 +21 +-3.18726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12546 +20 +-3.18726 +11 +6.12997 +21 +-3.18576 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12997 +20 +-3.18576 +11 +6.13135 +21 +-3.18437 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13135 +20 +-3.18437 +11 +6.13219 +21 +-3.18379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13219 +20 +-3.18379 +11 +6.1342 +21 +-3.18361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1342 +20 +-3.18361 +11 +6.13586 +21 +-3.18477 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13586 +20 +-3.18477 +11 +6.13638 +21 +-3.18672 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13638 +20 +-3.18672 +11 +6.13553 +21 +-3.18855 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13553 +20 +-3.18855 +11 +6.13365 +21 +-3.19042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13365 +20 +-3.19042 +11 +6.13281 +21 +-3.19101 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13281 +20 +-3.19101 +11 +6.13264 +21 +-3.19103 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13264 +20 +-3.19103 +11 +6.1325 +21 +-3.19114 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1325 +20 +-3.19114 +11 +6.12687 +21 +-3.19301 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12687 +20 +-3.19301 +11 +6.126 +21 +-3.19314 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.126 +20 +-3.19314 +11 +6.12594 +21 +-3.19316 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12594 +20 +-3.19316 +11 +6.12219 +21 +-3.19316 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12219 +20 +-3.19316 +11 +6.12132 +21 +-3.19301 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12132 +20 +-3.19301 +11 +6.12126 +21 +-3.19301 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12126 +20 +-3.19301 +11 +6.11563 +21 +-3.19114 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11563 +20 +-3.19114 +11 +6.11473 +21 +-3.19065 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11473 +20 +-3.19065 +11 +6.11464 +21 +-3.1905 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11464 +20 +-3.1905 +11 +6.11448 +21 +-3.19042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11448 +20 +-3.19042 +11 +6.11073 +21 +-3.18668 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11073 +20 +-3.18668 +11 +6.11022 +21 +-3.18595 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11022 +20 +-3.18595 +11 +6.11017 +21 +-3.18591 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11017 +20 +-3.18591 +11 +6.1083 +21 +-3.18216 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1083 +20 +-3.18216 +11 +6.10815 +21 +-3.18167 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10815 +20 +-3.18167 +11 +6.10808 +21 +-3.18155 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10808 +20 +-3.18155 +11 +6.1062 +21 +-3.17406 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1062 +20 +-3.17406 +11 +6.10616 +21 +-3.17347 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10616 +20 +-3.17347 +11 +6.10611 +21 +-3.17334 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10611 +20 +-3.17334 +11 +6.10611 +21 +-3.16771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10611 +20 +-3.16771 +11 +6.10622 +21 +-3.16713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10622 +20 +-3.16713 +11 +6.1062 +21 +-3.167 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1062 +20 +-3.167 +11 +6.10808 +21 +-3.1595 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10808 +20 +-3.1595 +11 +6.10828 +21 +-3.15903 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10828 +20 +-3.15903 +11 +6.1083 +21 +-3.1589 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1083 +20 +-3.1589 +11 +6.11017 +21 +-3.15515 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11017 +20 +-3.15515 +11 +6.1107 +21 +-3.15444 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1107 +20 +-3.15444 +11 +6.11073 +21 +-3.15438 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11073 +20 +-3.15438 +11 +6.11448 +21 +-3.15063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11448 +20 +-3.15063 +11 +6.11532 +21 +-3.15004 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11532 +20 +-3.15004 +11 +6.11549 +21 +-3.15002 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11549 +20 +-3.15002 +11 +6.11563 +21 +-3.14992 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11563 +20 +-3.14992 +11 +6.12126 +21 +-3.14804 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12126 +20 +-3.14804 +11 +6.12213 +21 +-3.14791 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12213 +20 +-3.14791 +11 +6.12219 +21 +-3.14789 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12219 +20 +-3.14789 +11 +6.12594 +21 +-3.14789 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12594 +20 +-3.14789 +11 +6.12681 +21 +-3.14804 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02376 +20 +-3.18301 +11 +6.02445 +21 +-3.18469 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02445 +20 +-3.18469 +11 +6.02376 +21 +-3.18636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02376 +20 +-3.18636 +11 +6.02209 +21 +-3.18705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02209 +20 +-3.18705 +11 +6.00421 +21 +-3.18705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00421 +20 +-3.18705 +11 +6.00254 +21 +-3.18636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00254 +20 +-3.18636 +11 +6.00185 +21 +-3.18469 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00185 +20 +-3.18469 +11 +6.00254 +21 +-3.18301 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00254 +20 +-3.18301 +11 +6.00421 +21 +-3.18232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00421 +20 +-3.18232 +11 +6.02209 +21 +-3.18232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02209 +20 +-3.18232 +11 +6.02376 +21 +-3.18301 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60118 +20 +-3.11804 +11 +6.60125 +21 +-3.11804 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60125 +20 +-3.11804 +11 +6.60687 +21 +-3.11992 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60687 +20 +-3.11992 +11 +6.60777 +21 +-3.1204 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60777 +20 +-3.1204 +11 +6.60787 +21 +-3.12055 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60787 +20 +-3.12055 +11 +6.60803 +21 +-3.12063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60803 +20 +-3.12063 +11 +6.61178 +21 +-3.12438 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61178 +20 +-3.12438 +11 +6.61228 +21 +-3.1251 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61228 +20 +-3.1251 +11 +6.61233 +21 +-3.12515 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61233 +20 +-3.12515 +11 +6.6142 +21 +-3.1289 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6142 +20 +-3.1289 +11 +6.61435 +21 +-3.12938 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61435 +20 +-3.12938 +11 +6.61443 +21 +-3.1295 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61443 +20 +-3.1295 +11 +6.6163 +21 +-3.137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6163 +20 +-3.137 +11 +6.61634 +21 +-3.13759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61634 +20 +-3.13759 +11 +6.61639 +21 +-3.13771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61639 +20 +-3.13771 +11 +6.61639 +21 +-3.14334 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61639 +20 +-3.14334 +11 +6.61629 +21 +-3.14392 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61629 +20 +-3.14392 +11 +6.6163 +21 +-3.14406 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6163 +20 +-3.14406 +11 +6.61443 +21 +-3.15155 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61443 +20 +-3.15155 +11 +6.61422 +21 +-3.15202 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61422 +20 +-3.15202 +11 +6.6142 +21 +-3.15216 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6142 +20 +-3.15216 +11 +6.61233 +21 +-3.15591 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61233 +20 +-3.15591 +11 +6.6118 +21 +-3.15662 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6118 +20 +-3.15662 +11 +6.61178 +21 +-3.15668 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61178 +20 +-3.15668 +11 +6.60803 +21 +-3.16042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60803 +20 +-3.16042 +11 +6.60719 +21 +-3.16101 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60719 +20 +-3.16101 +11 +6.60701 +21 +-3.16103 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60701 +20 +-3.16103 +11 +6.60687 +21 +-3.16114 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60687 +20 +-3.16114 +11 +6.60125 +21 +-3.16301 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60125 +20 +-3.16301 +11 +6.60038 +21 +-3.16314 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60038 +20 +-3.16314 +11 +6.60031 +21 +-3.16316 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60031 +20 +-3.16316 +11 +6.59094 +21 +-3.16316 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59094 +20 +-3.16316 +11 +6.59056 +21 +-3.1631 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59056 +20 +-3.1631 +11 +6.59043 +21 +-3.16312 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59043 +20 +-3.16312 +11 +6.59031 +21 +-3.16305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59031 +20 +-3.16305 +11 +6.58993 +21 +-3.16299 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58993 +20 +-3.16299 +11 +6.58934 +21 +-3.16249 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58934 +20 +-3.16249 +11 +6.58868 +21 +-3.16211 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58868 +20 +-3.16211 +11 +6.58859 +21 +-3.16186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58859 +20 +-3.16186 +11 +6.58838 +21 +-3.16169 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58838 +20 +-3.16169 +11 +6.58825 +21 +-3.16093 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58825 +20 +-3.16093 +11 +6.58799 +21 +-3.16021 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58799 +20 +-3.16021 +11 +6.58799 +21 +-3.12084 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58799 +20 +-3.12084 +11 +6.58806 +21 +-3.12046 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58806 +20 +-3.12046 +11 +6.58803 +21 +-3.12033 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58803 +20 +-3.12033 +11 +6.5881 +21 +-3.12022 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5881 +20 +-3.12022 +11 +6.58817 +21 +-3.11983 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58817 +20 +-3.11983 +11 +6.58866 +21 +-3.11924 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58866 +20 +-3.11924 +11 +6.58904 +21 +-3.11858 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58904 +20 +-3.11858 +11 +6.58929 +21 +-3.11849 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58929 +20 +-3.11849 +11 +6.58946 +21 +-3.11828 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58946 +20 +-3.11828 +11 +6.59022 +21 +-3.11815 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59022 +20 +-3.11815 +11 +6.59094 +21 +-3.11789 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59094 +20 +-3.11789 +11 +6.60031 +21 +-3.11789 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60031 +20 +-3.11789 +11 +6.60118 +21 +-3.11804 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59389 +20 +-3.15726 +11 +6.59984 +21 +-3.15726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59984 +20 +-3.15726 +11 +6.60434 +21 +-3.15576 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60434 +20 +-3.15576 +11 +6.60726 +21 +-3.15284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60726 +20 +-3.15284 +11 +6.60878 +21 +-3.14981 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60878 +20 +-3.14981 +11 +6.61049 +21 +-3.14298 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61049 +20 +-3.14298 +11 +6.61049 +21 +-3.13808 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61049 +20 +-3.13808 +11 +6.60878 +21 +-3.13125 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60878 +20 +-3.13125 +11 +6.60726 +21 +-3.12822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60726 +20 +-3.12822 +11 +6.60434 +21 +-3.1253 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60434 +20 +-3.1253 +11 +6.59984 +21 +-3.12379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59984 +20 +-3.12379 +11 +6.59389 +21 +-3.12379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59389 +20 +-3.12379 +11 +6.59389 +21 +-3.15726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63922 +20 +-3.11637 +11 +6.64056 +21 +-3.11788 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64056 +20 +-3.11788 +11 +6.64061 +21 +-3.1199 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64061 +20 +-3.1199 +11 +6.63253 +21 +-3.14414 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63253 +20 +-3.14414 +11 +6.64423 +21 +-3.14414 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64423 +20 +-3.14414 +11 +6.64423 +21 +-3.13397 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64423 +20 +-3.13397 +11 +6.64441 +21 +-3.13296 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64441 +20 +-3.13296 +11 +6.64571 +21 +-3.13141 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64571 +20 +-3.13141 +11 +6.6477 +21 +-3.13106 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6477 +20 +-3.13106 +11 +6.64945 +21 +-3.13207 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64945 +20 +-3.13207 +11 +6.65014 +21 +-3.13397 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65014 +20 +-3.13397 +11 +6.65014 +21 +-3.14414 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65014 +20 +-3.14414 +11 +6.65281 +21 +-3.14414 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65281 +20 +-3.14414 +11 +6.65382 +21 +-3.14431 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65382 +20 +-3.14431 +11 +6.65537 +21 +-3.14561 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65537 +20 +-3.14561 +11 +6.65572 +21 +-3.1476 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65572 +20 +-3.1476 +11 +6.65471 +21 +-3.14935 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65471 +20 +-3.14935 +11 +6.65281 +21 +-3.15004 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65281 +20 +-3.15004 +11 +6.65014 +21 +-3.15004 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65014 +20 +-3.15004 +11 +6.65014 +21 +-3.16021 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65014 +20 +-3.16021 +11 +6.64996 +21 +-3.16122 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64996 +20 +-3.16122 +11 +6.64866 +21 +-3.16277 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64866 +20 +-3.16277 +11 +6.64667 +21 +-3.16312 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64667 +20 +-3.16312 +11 +6.64492 +21 +-3.16211 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64492 +20 +-3.16211 +11 +6.64423 +21 +-3.16021 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64423 +20 +-3.16021 +11 +6.64423 +21 +-3.15004 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64423 +20 +-3.15004 +11 +6.62844 +21 +-3.15004 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62844 +20 +-3.15004 +11 +6.62743 +21 +-3.14986 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62743 +20 +-3.14986 +11 +6.62725 +21 +-3.14972 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62725 +20 +-3.14972 +11 +6.62703 +21 +-3.14968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62703 +20 +-3.14968 +11 +6.6265 +21 +-3.14908 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6265 +20 +-3.14908 +11 +6.62588 +21 +-3.14856 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62588 +20 +-3.14856 +11 +6.62584 +21 +-3.14834 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62584 +20 +-3.14834 +11 +6.62569 +21 +-3.14817 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62569 +20 +-3.14817 +11 +6.62567 +21 +-3.14737 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62567 +20 +-3.14737 +11 +6.62553 +21 +-3.14658 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62553 +20 +-3.14658 +11 +6.62564 +21 +-3.14638 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62564 +20 +-3.14638 +11 +6.62564 +21 +-3.14615 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62564 +20 +-3.14615 +11 +6.63501 +21 +-3.11803 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63501 +20 +-3.11803 +11 +6.6355 +21 +-3.11713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6355 +20 +-3.11713 +11 +6.63722 +21 +-3.11607 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63722 +20 +-3.11607 +11 +6.63922 +21 +-3.11637 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21003 +20 +-3.13942 +11 +6.21072 +21 +-3.14109 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21072 +20 +-3.14109 +11 +6.21003 +21 +-3.14276 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21003 +20 +-3.14276 +11 +6.20836 +21 +-3.14345 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20836 +20 +-3.14345 +11 +6.18779 +21 +-3.14345 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18779 +20 +-3.14345 +11 +6.18612 +21 +-3.14276 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18612 +20 +-3.14276 +11 +6.18543 +21 +-3.14109 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18543 +20 +-3.14109 +11 +6.18612 +21 +-3.13942 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18612 +20 +-3.13942 +11 +6.18779 +21 +-3.13872 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18779 +20 +-3.13872 +11 +6.20836 +21 +-3.13872 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20836 +20 +-3.13872 +11 +6.21003 +21 +-3.13942 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02376 +20 +-3.12514 +11 +6.02445 +21 +-3.12681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02445 +20 +-3.12681 +11 +6.02376 +21 +-3.12848 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02376 +20 +-3.12848 +11 +6.02209 +21 +-3.12917 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02209 +20 +-3.12917 +11 +6.00421 +21 +-3.12917 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00421 +20 +-3.12917 +11 +6.00254 +21 +-3.12848 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00254 +20 +-3.12848 +11 +6.00185 +21 +-3.12681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00185 +20 +-3.12681 +11 +6.00254 +21 +-3.12514 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00254 +20 +-3.12514 +11 +6.00421 +21 +-3.12445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00421 +20 +-3.12445 +11 +6.02209 +21 +-3.12445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02209 +20 +-3.12445 +11 +6.02376 +21 +-3.12514 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49868 +20 +-3.07519 +11 +6.49937 +21 +-3.07686 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49937 +20 +-3.07686 +11 +6.49937 +21 +-3.09744 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49937 +20 +-3.09744 +11 +6.49868 +21 +-3.09911 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49868 +20 +-3.09911 +11 +6.49701 +21 +-3.0998 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49701 +20 +-3.0998 +11 +6.49534 +21 +-3.09911 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49534 +20 +-3.09911 +11 +6.49465 +21 +-3.09744 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49465 +20 +-3.09744 +11 +6.49465 +21 +-3.07686 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49465 +20 +-3.07686 +11 +6.49534 +21 +-3.07519 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49534 +20 +-3.07519 +11 +6.49701 +21 +-3.0745 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49701 +20 +-3.0745 +11 +6.49868 +21 +-3.07519 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44081 +20 +-3.07519 +11 +6.4415 +21 +-3.07686 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4415 +20 +-3.07686 +11 +6.4415 +21 +-3.09744 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4415 +20 +-3.09744 +11 +6.44081 +21 +-3.09911 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44081 +20 +-3.09911 +11 +6.43914 +21 +-3.0998 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43914 +20 +-3.0998 +11 +6.43747 +21 +-3.09911 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43747 +20 +-3.09911 +11 +6.43678 +21 +-3.09744 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43678 +20 +-3.09744 +11 +6.43678 +21 +-3.07686 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43678 +20 +-3.07686 +11 +6.43747 +21 +-3.07519 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43747 +20 +-3.07519 +11 +6.43914 +21 +-3.0745 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.43914 +20 +-3.0745 +11 +6.44081 +21 +-3.07519 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41968 +20 +-3.07479 +11 +6.42037 +21 +-3.07646 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42037 +20 +-3.07646 +11 +6.42037 +21 +-3.09703 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42037 +20 +-3.09703 +11 +6.41968 +21 +-3.0987 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41968 +20 +-3.0987 +11 +6.41801 +21 +-3.0994 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41801 +20 +-3.0994 +11 +6.41634 +21 +-3.0987 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41634 +20 +-3.0987 +11 +6.41565 +21 +-3.09703 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41565 +20 +-3.09703 +11 +6.41565 +21 +-3.07646 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41565 +20 +-3.07646 +11 +6.41634 +21 +-3.07479 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41634 +20 +-3.07479 +11 +6.41801 +21 +-3.0741 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.41801 +20 +-3.0741 +11 +6.41968 +21 +-3.07479 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36181 +20 +-3.07479 +11 +6.3625 +21 +-3.07646 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3625 +20 +-3.07646 +11 +6.3625 +21 +-3.09703 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3625 +20 +-3.09703 +11 +6.36181 +21 +-3.0987 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36181 +20 +-3.0987 +11 +6.36014 +21 +-3.0994 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36014 +20 +-3.0994 +11 +6.35847 +21 +-3.0987 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35847 +20 +-3.0987 +11 +6.35778 +21 +-3.09703 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35778 +20 +-3.09703 +11 +6.35778 +21 +-3.07646 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35778 +20 +-3.07646 +11 +6.35847 +21 +-3.07479 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35847 +20 +-3.07479 +11 +6.36014 +21 +-3.0741 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36014 +20 +-3.0741 +11 +6.36181 +21 +-3.07479 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33968 +20 +-3.07479 +11 +6.34037 +21 +-3.07646 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34037 +20 +-3.07646 +11 +6.34037 +21 +-3.09703 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34037 +20 +-3.09703 +11 +6.33968 +21 +-3.0987 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33968 +20 +-3.0987 +11 +6.33801 +21 +-3.0994 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33801 +20 +-3.0994 +11 +6.33634 +21 +-3.0987 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33634 +20 +-3.0987 +11 +6.33565 +21 +-3.09703 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33565 +20 +-3.09703 +11 +6.33565 +21 +-3.07646 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33565 +20 +-3.07646 +11 +6.33634 +21 +-3.07479 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33634 +20 +-3.07479 +11 +6.33801 +21 +-3.0741 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33801 +20 +-3.0741 +11 +6.33968 +21 +-3.07479 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28181 +20 +-3.07479 +11 +6.2825 +21 +-3.07646 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2825 +20 +-3.07646 +11 +6.2825 +21 +-3.09703 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2825 +20 +-3.09703 +11 +6.28181 +21 +-3.0987 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28181 +20 +-3.0987 +11 +6.28014 +21 +-3.0994 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28014 +20 +-3.0994 +11 +6.27847 +21 +-3.0987 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27847 +20 +-3.0987 +11 +6.27778 +21 +-3.09703 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27778 +20 +-3.09703 +11 +6.27778 +21 +-3.07646 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27778 +20 +-3.07646 +11 +6.27847 +21 +-3.07479 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27847 +20 +-3.07479 +11 +6.28014 +21 +-3.0741 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28014 +20 +-3.0741 +11 +6.28181 +21 +-3.07479 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95227 +20 +-3.04807 +11 +5.95382 +21 +-3.04937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95382 +20 +-3.04937 +11 +5.95417 +21 +-3.05135 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95417 +20 +-3.05135 +11 +5.95316 +21 +-3.0531 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95316 +20 +-3.0531 +11 +5.95126 +21 +-3.05379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95126 +20 +-3.05379 +11 +5.94446 +21 +-3.05379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94446 +20 +-3.05379 +11 +5.94176 +21 +-3.05514 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94176 +20 +-3.05514 +11 +5.94043 +21 +-3.05647 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94043 +20 +-3.05647 +11 +5.93713 +21 +-3.06143 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93713 +20 +-3.06143 +11 +5.9364 +21 +-3.06435 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9364 +20 +-3.06435 +11 +5.93869 +21 +-3.0632 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93869 +20 +-3.0632 +11 +5.93967 +21 +-3.06291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93967 +20 +-3.06291 +11 +5.93984 +21 +-3.06295 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93984 +20 +-3.06295 +11 +5.94001 +21 +-3.06289 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94001 +20 +-3.06289 +11 +5.94751 +21 +-3.06289 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94751 +20 +-3.06289 +11 +5.94852 +21 +-3.06307 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94852 +20 +-3.06307 +11 +5.94865 +21 +-3.06318 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94865 +20 +-3.06318 +11 +5.94883 +21 +-3.0632 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94883 +20 +-3.0632 +11 +5.95258 +21 +-3.06507 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95258 +20 +-3.06507 +11 +5.95329 +21 +-3.0656 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95329 +20 +-3.0656 +11 +5.95335 +21 +-3.06563 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95335 +20 +-3.06563 +11 +5.95522 +21 +-3.0675 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95522 +20 +-3.0675 +11 +5.95573 +21 +-3.06822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95573 +20 +-3.06822 +11 +5.95577 +21 +-3.06827 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95577 +20 +-3.06827 +11 +5.95765 +21 +-3.07202 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95765 +20 +-3.07202 +11 +5.95794 +21 +-3.073 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95794 +20 +-3.073 +11 +5.9579 +21 +-3.07317 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9579 +20 +-3.07317 +11 +5.95796 +21 +-3.07334 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95796 +20 +-3.07334 +11 +5.95796 +21 +-3.08271 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95796 +20 +-3.08271 +11 +5.95778 +21 +-3.08372 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95778 +20 +-3.08372 +11 +5.95767 +21 +-3.08386 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95767 +20 +-3.08386 +11 +5.95765 +21 +-3.08403 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95765 +20 +-3.08403 +11 +5.95577 +21 +-3.08778 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95577 +20 +-3.08778 +11 +5.95525 +21 +-3.08849 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95525 +20 +-3.08849 +11 +5.95522 +21 +-3.08855 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95522 +20 +-3.08855 +11 +5.95335 +21 +-3.09042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95335 +20 +-3.09042 +11 +5.95262 +21 +-3.09093 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95262 +20 +-3.09093 +11 +5.95258 +21 +-3.09098 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95258 +20 +-3.09098 +11 +5.94883 +21 +-3.09285 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94883 +20 +-3.09285 +11 +5.94785 +21 +-3.09315 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94785 +20 +-3.09315 +11 +5.94768 +21 +-3.0931 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94768 +20 +-3.0931 +11 +5.94751 +21 +-3.09316 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94751 +20 +-3.09316 +11 +5.94001 +21 +-3.09316 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94001 +20 +-3.09316 +11 +5.939 +21 +-3.09299 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.939 +20 +-3.09299 +11 +5.93887 +21 +-3.09287 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93887 +20 +-3.09287 +11 +5.93869 +21 +-3.09285 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93869 +20 +-3.09285 +11 +5.93494 +21 +-3.09098 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93494 +20 +-3.09098 +11 +5.93423 +21 +-3.09045 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93423 +20 +-3.09045 +11 +5.93417 +21 +-3.09042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93417 +20 +-3.09042 +11 +5.9323 +21 +-3.08855 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9323 +20 +-3.08855 +11 +5.93179 +21 +-3.08783 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93179 +20 +-3.08783 +11 +5.93175 +21 +-3.08778 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93175 +20 +-3.08778 +11 +5.92987 +21 +-3.08403 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92987 +20 +-3.08403 +11 +5.92958 +21 +-3.08305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92958 +20 +-3.08305 +11 +5.92962 +21 +-3.08288 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92962 +20 +-3.08288 +11 +5.92956 +21 +-3.08271 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92956 +20 +-3.08271 +11 +5.92956 +21 +-3.06771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92956 +20 +-3.06771 +11 +5.92966 +21 +-3.06713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92966 +20 +-3.06713 +11 +5.92965 +21 +-3.067 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92965 +20 +-3.067 +11 +5.93152 +21 +-3.0595 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93152 +20 +-3.0595 +11 +5.93193 +21 +-3.05859 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93193 +20 +-3.05859 +11 +5.93193 +21 +-3.05858 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93193 +20 +-3.05858 +11 +5.93568 +21 +-3.05295 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93568 +20 +-3.05295 +11 +5.93599 +21 +-3.05263 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93599 +20 +-3.05263 +11 +5.93605 +21 +-3.0525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93605 +20 +-3.0525 +11 +5.93792 +21 +-3.05063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93792 +20 +-3.05063 +11 +5.93865 +21 +-3.05012 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93865 +20 +-3.05012 +11 +5.93869 +21 +-3.05008 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93869 +20 +-3.05008 +11 +5.94244 +21 +-3.0482 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94244 +20 +-3.0482 +11 +5.94342 +21 +-3.04791 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94342 +20 +-3.04791 +11 +5.94359 +21 +-3.04795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94359 +20 +-3.04795 +11 +5.94376 +21 +-3.04789 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94376 +20 +-3.04789 +11 +5.95126 +21 +-3.04789 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95126 +20 +-3.04789 +11 +5.95227 +21 +-3.04807 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93801 +20 +-3.07014 +11 +5.93681 +21 +-3.07134 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93681 +20 +-3.07134 +11 +5.93546 +21 +-3.07404 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93546 +20 +-3.07404 +11 +5.93546 +21 +-3.08202 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93546 +20 +-3.08202 +11 +5.93681 +21 +-3.08471 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93681 +20 +-3.08471 +11 +5.93801 +21 +-3.08591 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93801 +20 +-3.08591 +11 +5.94071 +21 +-3.08726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94071 +20 +-3.08726 +11 +5.94681 +21 +-3.08726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94681 +20 +-3.08726 +11 +5.94951 +21 +-3.08591 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94951 +20 +-3.08591 +11 +5.95071 +21 +-3.08471 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95071 +20 +-3.08471 +11 +5.95206 +21 +-3.08202 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95206 +20 +-3.08202 +11 +5.95206 +21 +-3.07404 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95206 +20 +-3.07404 +11 +5.95071 +21 +-3.07134 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95071 +20 +-3.07134 +11 +5.94951 +21 +-3.07014 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94951 +20 +-3.07014 +11 +5.94681 +21 +-3.06879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94681 +20 +-3.06879 +11 +5.94071 +21 +-3.06879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94071 +20 +-3.06879 +11 +5.93801 +21 +-3.07014 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91102 +20 +-3.04807 +11 +5.91116 +21 +-3.04818 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91116 +20 +-3.04818 +11 +5.91133 +21 +-3.0482 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91133 +20 +-3.0482 +11 +5.91508 +21 +-3.05008 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91508 +20 +-3.05008 +11 +5.91579 +21 +-3.0506 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91579 +20 +-3.0506 +11 +5.91585 +21 +-3.05063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91585 +20 +-3.05063 +11 +5.91773 +21 +-3.0525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91773 +20 +-3.0525 +11 +5.91823 +21 +-3.05323 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91823 +20 +-3.05323 +11 +5.91828 +21 +-3.05327 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91828 +20 +-3.05327 +11 +5.92015 +21 +-3.05702 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92015 +20 +-3.05702 +11 +5.92045 +21 +-3.058 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92045 +20 +-3.058 +11 +5.92041 +21 +-3.05817 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92041 +20 +-3.05817 +11 +5.92047 +21 +-3.05834 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92047 +20 +-3.05834 +11 +5.92047 +21 +-3.06397 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92047 +20 +-3.06397 +11 +5.92029 +21 +-3.06498 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92029 +20 +-3.06498 +11 +5.92017 +21 +-3.06511 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92017 +20 +-3.06511 +11 +5.92015 +21 +-3.06529 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92015 +20 +-3.06529 +11 +5.91828 +21 +-3.06904 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91828 +20 +-3.06904 +11 +5.91775 +21 +-3.06974 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91775 +20 +-3.06974 +11 +5.91773 +21 +-3.0698 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91773 +20 +-3.0698 +11 +5.91585 +21 +-3.07168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91585 +20 +-3.07168 +11 +5.91513 +21 +-3.07218 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91513 +20 +-3.07218 +11 +5.91508 +21 +-3.07223 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91508 +20 +-3.07223 +11 +5.91133 +21 +-3.07411 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91133 +20 +-3.07411 +11 +5.91035 +21 +-3.0744 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91035 +20 +-3.0744 +11 +5.91018 +21 +-3.07436 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91018 +20 +-3.07436 +11 +5.91005 +21 +-3.0744 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91005 +20 +-3.0744 +11 +5.91993 +21 +-3.08852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91993 +20 +-3.08852 +11 +5.92037 +21 +-3.08945 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92037 +20 +-3.08945 +11 +5.92019 +21 +-3.09146 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92019 +20 +-3.09146 +11 +5.91876 +21 +-3.09289 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91876 +20 +-3.09289 +11 +5.91675 +21 +-3.09306 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91675 +20 +-3.09306 +11 +5.91509 +21 +-3.09191 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91509 +20 +-3.09191 +11 +5.90285 +21 +-3.07442 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90285 +20 +-3.07442 +11 +5.89797 +21 +-3.07442 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89797 +20 +-3.07442 +11 +5.89797 +21 +-3.09021 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89797 +20 +-3.09021 +11 +5.89779 +21 +-3.09122 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89779 +20 +-3.09122 +11 +5.89649 +21 +-3.09277 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89649 +20 +-3.09277 +11 +5.8945 +21 +-3.09312 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8945 +20 +-3.09312 +11 +5.89275 +21 +-3.09211 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89275 +20 +-3.09211 +11 +5.89206 +21 +-3.09021 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89206 +20 +-3.09021 +11 +5.89206 +21 +-3.05084 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89206 +20 +-3.05084 +11 +5.89213 +21 +-3.05046 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89213 +20 +-3.05046 +11 +5.89211 +21 +-3.05033 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89211 +20 +-3.05033 +11 +5.89217 +21 +-3.05022 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89217 +20 +-3.05022 +11 +5.89224 +21 +-3.04983 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89224 +20 +-3.04983 +11 +5.89273 +21 +-3.04924 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89273 +20 +-3.04924 +11 +5.89312 +21 +-3.04858 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89312 +20 +-3.04858 +11 +5.89337 +21 +-3.04849 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89337 +20 +-3.04849 +11 +5.89354 +21 +-3.04828 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89354 +20 +-3.04828 +11 +5.8943 +21 +-3.04815 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8943 +20 +-3.04815 +11 +5.89502 +21 +-3.04789 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89502 +20 +-3.04789 +11 +5.91001 +21 +-3.04789 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91001 +20 +-3.04789 +11 +5.91102 +21 +-3.04807 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89797 +20 +-3.06851 +11 +5.90932 +21 +-3.06851 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90932 +20 +-3.06851 +11 +5.91201 +21 +-3.06716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91201 +20 +-3.06716 +11 +5.91321 +21 +-3.06597 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91321 +20 +-3.06597 +11 +5.91456 +21 +-3.06327 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91456 +20 +-3.06327 +11 +5.91456 +21 +-3.05904 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91456 +20 +-3.05904 +11 +5.91321 +21 +-3.05634 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91321 +20 +-3.05634 +11 +5.91201 +21 +-3.05514 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91201 +20 +-3.05514 +11 +5.90932 +21 +-3.05379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90932 +20 +-3.05379 +11 +5.89797 +21 +-3.05379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89797 +20 +-3.05379 +11 +5.89797 +21 +-3.06851 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21003 +20 +-3.08154 +11 +6.21072 +21 +-3.08321 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21072 +20 +-3.08321 +11 +6.21003 +21 +-3.08488 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21003 +20 +-3.08488 +11 +6.20836 +21 +-3.08557 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20836 +20 +-3.08557 +11 +6.18779 +21 +-3.08557 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18779 +20 +-3.08557 +11 +6.18612 +21 +-3.08488 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18612 +20 +-3.08488 +11 +6.18543 +21 +-3.08321 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18543 +20 +-3.08321 +11 +6.18612 +21 +-3.08154 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18612 +20 +-3.08154 +11 +6.18779 +21 +-3.08085 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18779 +20 +-3.08085 +11 +6.20836 +21 +-3.08085 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20836 +20 +-3.08085 +11 +6.21003 +21 +-3.08154 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20968 +20 +-3.06242 +11 +6.21038 +21 +-3.06409 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21038 +20 +-3.06409 +11 +6.20968 +21 +-3.06576 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20968 +20 +-3.06576 +11 +6.20801 +21 +-3.06645 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20801 +20 +-3.06645 +11 +6.19014 +21 +-3.06645 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19014 +20 +-3.06645 +11 +6.18846 +21 +-3.06576 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18846 +20 +-3.06576 +11 +6.18777 +21 +-3.06409 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18777 +20 +-3.06409 +11 +6.18846 +21 +-3.06242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18846 +20 +-3.06242 +11 +6.19014 +21 +-3.06172 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19014 +20 +-3.06172 +11 +6.20801 +21 +-3.06172 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20801 +20 +-3.06172 +11 +6.20968 +21 +-3.06242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11944 +20 +-2.99232 +11 +6.11958 +21 +-2.99243 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11958 +20 +-2.99243 +11 +6.11976 +21 +-2.99245 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11976 +20 +-2.99245 +11 +6.1235 +21 +-2.99433 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1235 +20 +-2.99433 +11 +6.12421 +21 +-2.99485 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12421 +20 +-2.99485 +11 +6.12427 +21 +-2.99488 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12427 +20 +-2.99488 +11 +6.12615 +21 +-2.99676 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12615 +20 +-2.99676 +11 +6.12665 +21 +-2.99748 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12665 +20 +-2.99748 +11 +6.1267 +21 +-2.99752 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1267 +20 +-2.99752 +11 +6.12857 +21 +-3.00127 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12857 +20 +-3.00127 +11 +6.12887 +21 +-3.00226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12887 +20 +-3.00226 +11 +6.12883 +21 +-3.00243 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12883 +20 +-3.00243 +11 +6.12889 +21 +-3.00259 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12889 +20 +-3.00259 +11 +6.12889 +21 +-3.00447 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12889 +20 +-3.00447 +11 +6.12871 +21 +-3.00548 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12871 +20 +-3.00548 +11 +6.12859 +21 +-3.00561 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12859 +20 +-3.00561 +11 +6.12857 +21 +-3.00579 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12857 +20 +-3.00579 +11 +6.1267 +21 +-3.00954 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1267 +20 +-3.00954 +11 +6.12617 +21 +-3.01025 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12617 +20 +-3.01025 +11 +6.12615 +21 +-3.0103 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12615 +20 +-3.0103 +11 +6.12449 +21 +-3.01197 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12449 +20 +-3.01197 +11 +6.12615 +21 +-3.01363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12615 +20 +-3.01363 +11 +6.12665 +21 +-3.01435 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12665 +20 +-3.01435 +11 +6.1267 +21 +-3.0144 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1267 +20 +-3.0144 +11 +6.12857 +21 +-3.01815 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12857 +20 +-3.01815 +11 +6.12887 +21 +-3.01913 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12887 +20 +-3.01913 +11 +6.12883 +21 +-3.0193 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12883 +20 +-3.0193 +11 +6.12889 +21 +-3.01947 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12889 +20 +-3.01947 +11 +6.12889 +21 +-3.02696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12889 +20 +-3.02696 +11 +6.12871 +21 +-3.02797 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12871 +20 +-3.02797 +11 +6.12859 +21 +-3.02811 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12859 +20 +-3.02811 +11 +6.12857 +21 +-3.02829 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12857 +20 +-3.02829 +11 +6.1267 +21 +-3.03203 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1267 +20 +-3.03203 +11 +6.12617 +21 +-3.03274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12617 +20 +-3.03274 +11 +6.12615 +21 +-3.0328 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12615 +20 +-3.0328 +11 +6.12427 +21 +-3.03468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12427 +20 +-3.03468 +11 +6.12355 +21 +-3.03518 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12355 +20 +-3.03518 +11 +6.1235 +21 +-3.03523 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1235 +20 +-3.03523 +11 +6.11976 +21 +-3.0371 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11976 +20 +-3.0371 +11 +6.11877 +21 +-3.0374 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11877 +20 +-3.0374 +11 +6.1186 +21 +-3.03736 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1186 +20 +-3.03736 +11 +6.11843 +21 +-3.03742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11843 +20 +-3.03742 +11 +6.11094 +21 +-3.03742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11094 +20 +-3.03742 +11 +6.10993 +21 +-3.03724 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10993 +20 +-3.03724 +11 +6.10979 +21 +-3.03712 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10979 +20 +-3.03712 +11 +6.10961 +21 +-3.0371 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10961 +20 +-3.0371 +11 +6.10587 +21 +-3.03523 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10587 +20 +-3.03523 +11 +6.10516 +21 +-3.0347 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10516 +20 +-3.0347 +11 +6.1051 +21 +-3.03468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1051 +20 +-3.03468 +11 +6.10322 +21 +-3.0328 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10322 +20 +-3.0328 +11 +6.10272 +21 +-3.03208 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10272 +20 +-3.03208 +11 +6.10267 +21 +-3.03203 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10267 +20 +-3.03203 +11 +6.1008 +21 +-3.02829 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1008 +20 +-3.02829 +11 +6.1005 +21 +-3.0273 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1005 +20 +-3.0273 +11 +6.10054 +21 +-3.02713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10054 +20 +-3.02713 +11 +6.10048 +21 +-3.02696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10048 +20 +-3.02696 +11 +6.10048 +21 +-3.01947 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10048 +20 +-3.01947 +11 +6.10066 +21 +-3.01846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10066 +20 +-3.01846 +11 +6.10078 +21 +-3.01832 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10078 +20 +-3.01832 +11 +6.1008 +21 +-3.01815 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1008 +20 +-3.01815 +11 +6.10267 +21 +-3.0144 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10267 +20 +-3.0144 +11 +6.1032 +21 +-3.01369 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1032 +20 +-3.01369 +11 +6.10322 +21 +-3.01363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10322 +20 +-3.01363 +11 +6.10488 +21 +-3.01197 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10488 +20 +-3.01197 +11 +6.10322 +21 +-3.0103 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10322 +20 +-3.0103 +11 +6.10272 +21 +-3.00958 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10272 +20 +-3.00958 +11 +6.10267 +21 +-3.00954 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10267 +20 +-3.00954 +11 +6.1008 +21 +-3.00579 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1008 +20 +-3.00579 +11 +6.1005 +21 +-3.00481 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1005 +20 +-3.00481 +11 +6.10054 +21 +-3.00463 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10054 +20 +-3.00463 +11 +6.10048 +21 +-3.00447 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10048 +20 +-3.00447 +11 +6.10048 +21 +-3.00259 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10048 +20 +-3.00259 +11 +6.10066 +21 +-3.00158 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10066 +20 +-3.00158 +11 +6.10078 +21 +-3.00145 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10078 +20 +-3.00145 +11 +6.1008 +21 +-3.00127 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1008 +20 +-3.00127 +11 +6.10267 +21 +-2.99752 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10267 +20 +-2.99752 +11 +6.1032 +21 +-2.99681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1032 +20 +-2.99681 +11 +6.10322 +21 +-2.99676 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10322 +20 +-2.99676 +11 +6.1051 +21 +-2.99488 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1051 +20 +-2.99488 +11 +6.10582 +21 +-2.99437 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10582 +20 +-2.99437 +11 +6.10587 +21 +-2.99433 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10587 +20 +-2.99433 +11 +6.10961 +21 +-2.99245 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10961 +20 +-2.99245 +11 +6.1106 +21 +-2.99216 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1106 +20 +-2.99216 +11 +6.11077 +21 +-2.9922 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11077 +20 +-2.9922 +11 +6.11094 +21 +-2.99214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11094 +20 +-2.99214 +11 +6.11843 +21 +-2.99214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11843 +20 +-2.99214 +11 +6.11944 +21 +-2.99232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10894 +20 +-3.01627 +11 +6.10774 +21 +-3.01747 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10774 +20 +-3.01747 +11 +6.10639 +21 +-3.02016 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10639 +20 +-3.02016 +11 +6.10639 +21 +-3.02627 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10639 +20 +-3.02627 +11 +6.10774 +21 +-3.02897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10774 +20 +-3.02897 +11 +6.10894 +21 +-3.03016 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10894 +20 +-3.03016 +11 +6.11163 +21 +-3.03151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11163 +20 +-3.03151 +11 +6.11774 +21 +-3.03151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11774 +20 +-3.03151 +11 +6.12043 +21 +-3.03016 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12043 +20 +-3.03016 +11 +6.12163 +21 +-3.02897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12163 +20 +-3.02897 +11 +6.12298 +21 +-3.02627 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12298 +20 +-3.02627 +11 +6.12298 +21 +-3.02016 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12298 +20 +-3.02016 +11 +6.12163 +21 +-3.01747 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12163 +20 +-3.01747 +11 +6.12043 +21 +-3.01627 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12043 +20 +-3.01627 +11 +6.11774 +21 +-3.01492 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11774 +20 +-3.01492 +11 +6.11163 +21 +-3.01492 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11163 +20 +-3.01492 +11 +6.10894 +21 +-3.01627 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10894 +20 +-2.9994 +11 +6.10774 +21 +-3.00059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10774 +20 +-3.00059 +11 +6.10639 +21 +-3.00329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10639 +20 +-3.00329 +11 +6.10639 +21 +-3.00377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10639 +20 +-3.00377 +11 +6.10774 +21 +-3.00647 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10774 +20 +-3.00647 +11 +6.10894 +21 +-3.00767 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10894 +20 +-3.00767 +11 +6.11163 +21 +-3.00901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11163 +20 +-3.00901 +11 +6.11774 +21 +-3.00901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11774 +20 +-3.00901 +11 +6.12043 +21 +-3.00767 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12043 +20 +-3.00767 +11 +6.12163 +21 +-3.00647 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12163 +20 +-3.00647 +11 +6.12298 +21 +-3.00377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12298 +20 +-3.00377 +11 +6.12298 +21 +-3.00329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12298 +20 +-3.00329 +11 +6.12163 +21 +-3.00059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12163 +20 +-3.00059 +11 +6.12043 +21 +-2.9994 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12043 +20 +-2.9994 +11 +6.11774 +21 +-2.99805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11774 +20 +-2.99805 +11 +6.11163 +21 +-2.99805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11163 +20 +-2.99805 +11 +6.10894 +21 +-2.9994 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08195 +20 +-2.99232 +11 +6.08208 +21 +-2.99243 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08208 +20 +-2.99243 +11 +6.08226 +21 +-2.99245 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08226 +20 +-2.99245 +11 +6.08601 +21 +-2.99433 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08601 +20 +-2.99433 +11 +6.08672 +21 +-2.99485 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08672 +20 +-2.99485 +11 +6.08678 +21 +-2.99488 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08678 +20 +-2.99488 +11 +6.08865 +21 +-2.99676 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08865 +20 +-2.99676 +11 +6.08916 +21 +-2.99748 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08916 +20 +-2.99748 +11 +6.0892 +21 +-2.99752 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0892 +20 +-2.99752 +11 +6.09108 +21 +-3.00127 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09108 +20 +-3.00127 +11 +6.09137 +21 +-3.00226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09137 +20 +-3.00226 +11 +6.09133 +21 +-3.00243 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09133 +20 +-3.00243 +11 +6.09139 +21 +-3.00259 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09139 +20 +-3.00259 +11 +6.09139 +21 +-3.00822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09139 +20 +-3.00822 +11 +6.09121 +21 +-3.00923 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09121 +20 +-3.00923 +11 +6.0911 +21 +-3.00936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0911 +20 +-3.00936 +11 +6.09108 +21 +-3.00954 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09108 +20 +-3.00954 +11 +6.0892 +21 +-3.01329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0892 +20 +-3.01329 +11 +6.08868 +21 +-3.014 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08868 +20 +-3.014 +11 +6.08865 +21 +-3.01405 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08865 +20 +-3.01405 +11 +6.08678 +21 +-3.01593 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08678 +20 +-3.01593 +11 +6.08605 +21 +-3.01644 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08605 +20 +-3.01644 +11 +6.08601 +21 +-3.01648 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08601 +20 +-3.01648 +11 +6.08226 +21 +-3.01836 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08226 +20 +-3.01836 +11 +6.08128 +21 +-3.01865 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08128 +20 +-3.01865 +11 +6.08111 +21 +-3.01861 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08111 +20 +-3.01861 +11 +6.08098 +21 +-3.01866 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08098 +20 +-3.01866 +11 +6.09086 +21 +-3.03277 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09086 +20 +-3.03277 +11 +6.09129 +21 +-3.0337 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09129 +20 +-3.0337 +11 +6.09111 +21 +-3.03571 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09111 +20 +-3.03571 +11 +6.08969 +21 +-3.03714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08969 +20 +-3.03714 +11 +6.08767 +21 +-3.03732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08767 +20 +-3.03732 +11 +6.08602 +21 +-3.03616 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08602 +20 +-3.03616 +11 +6.07378 +21 +-3.01867 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07378 +20 +-3.01867 +11 +6.06889 +21 +-3.01867 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06889 +20 +-3.01867 +11 +6.06889 +21 +-3.03446 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06889 +20 +-3.03446 +11 +6.06872 +21 +-3.03547 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06872 +20 +-3.03547 +11 +6.06742 +21 +-3.03702 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06742 +20 +-3.03702 +11 +6.06543 +21 +-3.03737 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06543 +20 +-3.03737 +11 +6.06368 +21 +-3.03636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06368 +20 +-3.03636 +11 +6.06299 +21 +-3.03446 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06299 +20 +-3.03446 +11 +6.06299 +21 +-2.99509 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06299 +20 +-2.99509 +11 +6.06306 +21 +-2.99471 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06306 +20 +-2.99471 +11 +6.06303 +21 +-2.99458 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06303 +20 +-2.99458 +11 +6.0631 +21 +-2.99447 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0631 +20 +-2.99447 +11 +6.06317 +21 +-2.99408 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06317 +20 +-2.99408 +11 +6.06366 +21 +-2.9935 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06366 +20 +-2.9935 +11 +6.06404 +21 +-2.99283 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06404 +20 +-2.99283 +11 +6.06429 +21 +-2.99274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06429 +20 +-2.99274 +11 +6.06446 +21 +-2.99254 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06446 +20 +-2.99254 +11 +6.06522 +21 +-2.9924 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06522 +20 +-2.9924 +11 +6.06594 +21 +-2.99214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06594 +20 +-2.99214 +11 +6.08094 +21 +-2.99214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08094 +20 +-2.99214 +11 +6.08195 +21 +-2.99232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06889 +20 +-3.01276 +11 +6.08024 +21 +-3.01276 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08024 +20 +-3.01276 +11 +6.08294 +21 +-3.01141 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08294 +20 +-3.01141 +11 +6.08414 +21 +-3.01022 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08414 +20 +-3.01022 +11 +6.08549 +21 +-3.00752 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08549 +20 +-3.00752 +11 +6.08549 +21 +-3.00329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08549 +20 +-3.00329 +11 +6.08414 +21 +-3.00059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08414 +20 +-3.00059 +11 +6.08294 +21 +-2.9994 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08294 +20 +-2.9994 +11 +6.08024 +21 +-2.99805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08024 +20 +-2.99805 +11 +6.06889 +21 +-2.99805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06889 +20 +-2.99805 +11 +6.06889 +21 +-3.01276 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93468 +20 +-3.03301 +11 +5.93538 +21 +-3.03469 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93538 +20 +-3.03469 +11 +5.93468 +21 +-3.03636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93468 +20 +-3.03636 +11 +5.93301 +21 +-3.03705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93301 +20 +-3.03705 +11 +5.91514 +21 +-3.03705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91514 +20 +-3.03705 +11 +5.91346 +21 +-3.03636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91346 +20 +-3.03636 +11 +5.91277 +21 +-3.03469 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91277 +20 +-3.03469 +11 +5.91346 +21 +-3.03301 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91346 +20 +-3.03301 +11 +5.91514 +21 +-3.03232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91514 +20 +-3.03232 +11 +5.93301 +21 +-3.03232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93301 +20 +-3.03232 +11 +5.93468 +21 +-3.03301 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67659 +20 +-2.96929 +11 +5.67673 +21 +-2.9694 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67673 +20 +-2.9694 +11 +5.6769 +21 +-2.96942 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6769 +20 +-2.96942 +11 +5.68065 +21 +-2.9713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68065 +20 +-2.9713 +11 +5.68136 +21 +-2.97182 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68136 +20 +-2.97182 +11 +5.68142 +21 +-2.97185 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68142 +20 +-2.97185 +11 +5.6833 +21 +-2.97372 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6833 +20 +-2.97372 +11 +5.6838 +21 +-2.97445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6838 +20 +-2.97445 +11 +5.68385 +21 +-2.97449 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68385 +20 +-2.97449 +11 +5.68572 +21 +-2.97824 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68572 +20 +-2.97824 +11 +5.68587 +21 +-2.97873 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68587 +20 +-2.97873 +11 +5.68595 +21 +-2.97885 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68595 +20 +-2.97885 +11 +5.68782 +21 +-2.98634 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68782 +20 +-2.98634 +11 +5.68786 +21 +-2.98693 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68786 +20 +-2.98693 +11 +5.68791 +21 +-2.98706 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68791 +20 +-2.98706 +11 +5.68791 +21 +-2.99643 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68791 +20 +-2.99643 +11 +5.68781 +21 +-2.99701 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68781 +20 +-2.99701 +11 +5.68782 +21 +-2.99715 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68782 +20 +-2.99715 +11 +5.68595 +21 +-3.00465 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68595 +20 +-3.00465 +11 +5.68574 +21 +-3.00511 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68574 +20 +-3.00511 +11 +5.68572 +21 +-3.00525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68572 +20 +-3.00525 +11 +5.68385 +21 +-3.009 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68385 +20 +-3.009 +11 +5.68332 +21 +-3.00971 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68332 +20 +-3.00971 +11 +5.6833 +21 +-3.00977 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6833 +20 +-3.00977 +11 +5.68142 +21 +-3.01165 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68142 +20 +-3.01165 +11 +5.6807 +21 +-3.01215 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6807 +20 +-3.01215 +11 +5.68065 +21 +-3.0122 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68065 +20 +-3.0122 +11 +5.6769 +21 +-3.01407 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6769 +20 +-3.01407 +11 +5.67592 +21 +-3.01437 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67592 +20 +-3.01437 +11 +5.67575 +21 +-3.01432 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67575 +20 +-3.01432 +11 +5.67558 +21 +-3.01439 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67558 +20 +-3.01439 +11 +5.67183 +21 +-3.01439 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67183 +20 +-3.01439 +11 +5.67082 +21 +-3.01421 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67082 +20 +-3.01421 +11 +5.67069 +21 +-3.01409 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67069 +20 +-3.01409 +11 +5.67051 +21 +-3.01407 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67051 +20 +-3.01407 +11 +5.66676 +21 +-3.0122 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66676 +20 +-3.0122 +11 +5.66605 +21 +-3.01167 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66605 +20 +-3.01167 +11 +5.666 +21 +-3.01165 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.666 +20 +-3.01165 +11 +5.66412 +21 +-3.00977 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66412 +20 +-3.00977 +11 +5.66362 +21 +-3.00905 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66362 +20 +-3.00905 +11 +5.66357 +21 +-3.009 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66357 +20 +-3.009 +11 +5.66169 +21 +-3.00525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66169 +20 +-3.00525 +11 +5.66155 +21 +-3.00477 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66155 +20 +-3.00477 +11 +5.66147 +21 +-3.00465 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66147 +20 +-3.00465 +11 +5.6596 +21 +-2.99715 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6596 +20 +-2.99715 +11 +5.65955 +21 +-2.99656 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65955 +20 +-2.99656 +11 +5.65951 +21 +-2.99643 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65951 +20 +-2.99643 +11 +5.65951 +21 +-2.98706 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65951 +20 +-2.98706 +11 +5.65961 +21 +-2.98648 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65961 +20 +-2.98648 +11 +5.6596 +21 +-2.98634 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6596 +20 +-2.98634 +11 +5.66147 +21 +-2.97885 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66147 +20 +-2.97885 +11 +5.66168 +21 +-2.97838 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66168 +20 +-2.97838 +11 +5.66169 +21 +-2.97824 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66169 +20 +-2.97824 +11 +5.66357 +21 +-2.97449 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66357 +20 +-2.97449 +11 +5.66409 +21 +-2.97378 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66409 +20 +-2.97378 +11 +5.66412 +21 +-2.97372 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66412 +20 +-2.97372 +11 +5.666 +21 +-2.97185 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.666 +20 +-2.97185 +11 +5.66672 +21 +-2.97134 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66672 +20 +-2.97134 +11 +5.66676 +21 +-2.9713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66676 +20 +-2.9713 +11 +5.67051 +21 +-2.96942 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67051 +20 +-2.96942 +11 +5.6715 +21 +-2.96913 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6715 +20 +-2.96913 +11 +5.67167 +21 +-2.96917 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67167 +20 +-2.96917 +11 +5.67183 +21 +-2.96911 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67183 +20 +-2.96911 +11 +5.67558 +21 +-2.96911 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67558 +20 +-2.96911 +11 +5.67659 +21 +-2.96929 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67253 +20 +-2.97501 +11 +5.66983 +21 +-2.97636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66983 +20 +-2.97636 +11 +5.66864 +21 +-2.97756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66864 +20 +-2.97756 +11 +5.66712 +21 +-2.98059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66712 +20 +-2.98059 +11 +5.66541 +21 +-2.98742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66541 +20 +-2.98742 +11 +5.66541 +21 +-2.99607 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66541 +20 +-2.99607 +11 +5.66712 +21 +-3.0029 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66712 +20 +-3.0029 +11 +5.66864 +21 +-3.00593 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66864 +20 +-3.00593 +11 +5.66983 +21 +-3.00713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66983 +20 +-3.00713 +11 +5.67253 +21 +-3.00848 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67253 +20 +-3.00848 +11 +5.67489 +21 +-3.00848 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67489 +20 +-3.00848 +11 +5.67758 +21 +-3.00713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67758 +20 +-3.00713 +11 +5.67878 +21 +-3.00593 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67878 +20 +-3.00593 +11 +5.6803 +21 +-3.0029 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6803 +20 +-3.0029 +11 +5.682 +21 +-2.99607 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.682 +20 +-2.99607 +11 +5.682 +21 +-2.98742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.682 +20 +-2.98742 +11 +5.6803 +21 +-2.98059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6803 +20 +-2.98059 +11 +5.67878 +21 +-2.97756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67878 +20 +-2.97756 +11 +5.67758 +21 +-2.97636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67758 +20 +-2.97636 +11 +5.67489 +21 +-2.97501 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67489 +20 +-2.97501 +11 +5.67253 +21 +-2.97501 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63656 +20 +-2.96918 +11 +5.63673 +21 +-2.96915 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63673 +20 +-2.96915 +11 +5.63747 +21 +-2.96958 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63747 +20 +-2.96958 +11 +5.63825 +21 +-2.96993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63825 +20 +-2.96993 +11 +5.63833 +21 +-2.97008 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63833 +20 +-2.97008 +11 +5.63847 +21 +-2.97016 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63847 +20 +-2.97016 +11 +5.63877 +21 +-2.97097 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63877 +20 +-2.97097 +11 +5.63915 +21 +-2.97174 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63915 +20 +-2.97174 +11 +5.63911 +21 +-2.9719 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63911 +20 +-2.9719 +11 +5.63917 +21 +-2.97206 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63917 +20 +-2.97206 +11 +5.63917 +21 +-3.00848 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63917 +20 +-3.00848 +11 +5.64746 +21 +-3.00848 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64746 +20 +-3.00848 +11 +5.64847 +21 +-3.00866 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64847 +20 +-3.00866 +11 +5.65002 +21 +-3.00996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65002 +20 +-3.00996 +11 +5.65037 +21 +-3.01195 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65037 +20 +-3.01195 +11 +5.64936 +21 +-3.01369 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64936 +20 +-3.01369 +11 +5.64746 +21 +-3.01439 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64746 +20 +-3.01439 +11 +5.62496 +21 +-3.01439 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62496 +20 +-3.01439 +11 +5.62395 +21 +-3.01421 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62395 +20 +-3.01421 +11 +5.62241 +21 +-3.01291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62241 +20 +-3.01291 +11 +5.62206 +21 +-3.01092 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62206 +20 +-3.01092 +11 +5.62307 +21 +-3.00917 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62307 +20 +-3.00917 +11 +5.62496 +21 +-3.00848 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62496 +20 +-3.00848 +11 +5.63326 +21 +-3.00848 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63326 +20 +-3.00848 +11 +5.63326 +21 +-2.98107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63326 +20 +-2.98107 +11 +5.6308 +21 +-2.98352 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6308 +20 +-2.98352 +11 +5.63008 +21 +-2.98403 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63008 +20 +-2.98403 +11 +5.63003 +21 +-2.98408 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63003 +20 +-2.98408 +11 +5.62628 +21 +-2.98595 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62628 +20 +-2.98595 +11 +5.6253 +21 +-2.98624 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6253 +20 +-2.98624 +11 +5.62334 +21 +-2.98577 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62334 +20 +-2.98577 +11 +5.62213 +21 +-2.98415 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62213 +20 +-2.98415 +11 +5.62226 +21 +-2.98214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62226 +20 +-2.98214 +11 +5.62364 +21 +-2.98067 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62364 +20 +-2.98067 +11 +5.62696 +21 +-2.97901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62696 +20 +-2.97901 +11 +5.63017 +21 +-2.97581 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63017 +20 +-2.97581 +11 +5.63376 +21 +-2.97042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63376 +20 +-2.97042 +11 +5.63446 +21 +-2.96968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63446 +20 +-2.96968 +11 +5.63463 +21 +-2.96964 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63463 +20 +-2.96964 +11 +5.63474 +21 +-2.96951 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63474 +20 +-2.96951 +11 +5.63558 +21 +-2.96936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63558 +20 +-2.96936 +11 +5.6364 +21 +-2.96912 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6364 +20 +-2.96912 +11 +5.63656 +21 +-2.96918 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59906 +20 +-2.96918 +11 +5.59923 +21 +-2.96915 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59923 +20 +-2.96915 +11 +5.59997 +21 +-2.96958 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59997 +20 +-2.96958 +11 +5.60076 +21 +-2.96993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60076 +20 +-2.96993 +11 +5.60083 +21 +-2.97008 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60083 +20 +-2.97008 +11 +5.60098 +21 +-2.97016 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60098 +20 +-2.97016 +11 +5.60127 +21 +-2.97097 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60127 +20 +-2.97097 +11 +5.60165 +21 +-2.97174 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60165 +20 +-2.97174 +11 +5.60161 +21 +-2.9719 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60161 +20 +-2.9719 +11 +5.60167 +21 +-2.97206 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60167 +20 +-2.97206 +11 +5.60167 +21 +-3.00848 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60167 +20 +-3.00848 +11 +5.60997 +21 +-3.00848 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60997 +20 +-3.00848 +11 +5.61098 +21 +-3.00866 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61098 +20 +-3.00866 +11 +5.61252 +21 +-3.00996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61252 +20 +-3.00996 +11 +5.61287 +21 +-3.01195 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61287 +20 +-3.01195 +11 +5.61186 +21 +-3.01369 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61186 +20 +-3.01369 +11 +5.60997 +21 +-3.01439 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60997 +20 +-3.01439 +11 +5.58747 +21 +-3.01439 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.58747 +20 +-3.01439 +11 +5.58646 +21 +-3.01421 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.58646 +20 +-3.01421 +11 +5.58491 +21 +-3.01291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.58491 +20 +-3.01291 +11 +5.58456 +21 +-3.01092 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.58456 +20 +-3.01092 +11 +5.58557 +21 +-3.00917 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.58557 +20 +-3.00917 +11 +5.58747 +21 +-3.00848 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.58747 +20 +-3.00848 +11 +5.59576 +21 +-3.00848 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59576 +20 +-3.00848 +11 +5.59576 +21 +-2.98107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59576 +20 +-2.98107 +11 +5.59331 +21 +-2.98352 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59331 +20 +-2.98352 +11 +5.59258 +21 +-2.98403 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59258 +20 +-2.98403 +11 +5.59254 +21 +-2.98408 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59254 +20 +-2.98408 +11 +5.58879 +21 +-2.98595 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.58879 +20 +-2.98595 +11 +5.58781 +21 +-2.98624 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.58781 +20 +-2.98624 +11 +5.58584 +21 +-2.98577 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.58584 +20 +-2.98577 +11 +5.58464 +21 +-2.98415 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.58464 +20 +-2.98415 +11 +5.58476 +21 +-2.98214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.58476 +20 +-2.98214 +11 +5.58615 +21 +-2.98067 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.58615 +20 +-2.98067 +11 +5.58947 +21 +-2.97901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.58947 +20 +-2.97901 +11 +5.59267 +21 +-2.97581 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59267 +20 +-2.97581 +11 +5.59626 +21 +-2.97042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59626 +20 +-2.97042 +11 +5.59697 +21 +-2.96968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59697 +20 +-2.96968 +11 +5.59713 +21 +-2.96964 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59713 +20 +-2.96964 +11 +5.59724 +21 +-2.96951 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59724 +20 +-2.96951 +11 +5.59809 +21 +-2.96936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59809 +20 +-2.96936 +11 +5.59891 +21 +-2.96912 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.59891 +20 +-2.96912 +11 +5.59906 +21 +-2.96918 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47345 +20 +-2.96918 +11 +5.47362 +21 +-2.96915 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47362 +20 +-2.96915 +11 +5.47436 +21 +-2.96958 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47436 +20 +-2.96958 +11 +5.47515 +21 +-2.96993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47515 +20 +-2.96993 +11 +5.47522 +21 +-2.97008 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47522 +20 +-2.97008 +11 +5.47537 +21 +-2.97016 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47537 +20 +-2.97016 +11 +5.47566 +21 +-2.97097 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47566 +20 +-2.97097 +11 +5.47604 +21 +-2.97174 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47604 +20 +-2.97174 +11 +5.476 +21 +-2.9719 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.476 +20 +-2.9719 +11 +5.47606 +21 +-2.97206 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47606 +20 +-2.97206 +11 +5.47606 +21 +-3.00848 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47606 +20 +-3.00848 +11 +5.48436 +21 +-3.00848 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.48436 +20 +-3.00848 +11 +5.48537 +21 +-3.00866 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.48537 +20 +-3.00866 +11 +5.48691 +21 +-3.00996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.48691 +20 +-3.00996 +11 +5.48726 +21 +-3.01195 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.48726 +20 +-3.01195 +11 +5.48625 +21 +-3.01369 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.48625 +20 +-3.01369 +11 +5.48436 +21 +-3.01439 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.48436 +20 +-3.01439 +11 +5.46186 +21 +-3.01439 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.46186 +20 +-3.01439 +11 +5.46085 +21 +-3.01421 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.46085 +20 +-3.01421 +11 +5.4593 +21 +-3.01291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4593 +20 +-3.01291 +11 +5.45895 +21 +-3.01092 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45895 +20 +-3.01092 +11 +5.45996 +21 +-3.00917 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45996 +20 +-3.00917 +11 +5.46186 +21 +-3.00848 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.46186 +20 +-3.00848 +11 +5.47016 +21 +-3.00848 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47016 +20 +-3.00848 +11 +5.47016 +21 +-2.98107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47016 +20 +-2.98107 +11 +5.4677 +21 +-2.98352 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4677 +20 +-2.98352 +11 +5.46697 +21 +-2.98403 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.46697 +20 +-2.98403 +11 +5.46693 +21 +-2.98408 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.46693 +20 +-2.98408 +11 +5.46318 +21 +-2.98595 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.46318 +20 +-2.98595 +11 +5.4622 +21 +-2.98624 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4622 +20 +-2.98624 +11 +5.46023 +21 +-2.98577 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.46023 +20 +-2.98577 +11 +5.45903 +21 +-2.98415 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45903 +20 +-2.98415 +11 +5.45915 +21 +-2.98214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45915 +20 +-2.98214 +11 +5.46054 +21 +-2.98067 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.46054 +20 +-2.98067 +11 +5.46386 +21 +-2.97901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.46386 +20 +-2.97901 +11 +5.46706 +21 +-2.97581 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.46706 +20 +-2.97581 +11 +5.47065 +21 +-2.97042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47065 +20 +-2.97042 +11 +5.47136 +21 +-2.96968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47136 +20 +-2.96968 +11 +5.47152 +21 +-2.96964 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47152 +20 +-2.96964 +11 +5.47163 +21 +-2.96951 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47163 +20 +-2.96951 +11 +5.47248 +21 +-2.96936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47248 +20 +-2.96936 +11 +5.4733 +21 +-2.96912 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4733 +20 +-2.96912 +11 +5.47345 +21 +-2.96918 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4385 +20 +-2.96929 +11 +5.43863 +21 +-2.9694 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43863 +20 +-2.9694 +11 +5.43881 +21 +-2.96942 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43881 +20 +-2.96942 +11 +5.44256 +21 +-2.9713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44256 +20 +-2.9713 +11 +5.44327 +21 +-2.97182 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44327 +20 +-2.97182 +11 +5.44333 +21 +-2.97185 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44333 +20 +-2.97185 +11 +5.4452 +21 +-2.97372 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4452 +20 +-2.97372 +11 +5.44571 +21 +-2.97445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44571 +20 +-2.97445 +11 +5.44575 +21 +-2.97449 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44575 +20 +-2.97449 +11 +5.44763 +21 +-2.97824 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44763 +20 +-2.97824 +11 +5.44777 +21 +-2.97873 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44777 +20 +-2.97873 +11 +5.44785 +21 +-2.97885 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44785 +20 +-2.97885 +11 +5.44973 +21 +-2.98634 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44973 +20 +-2.98634 +11 +5.44977 +21 +-2.98693 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44977 +20 +-2.98693 +11 +5.44981 +21 +-2.98706 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44981 +20 +-2.98706 +11 +5.44981 +21 +-2.99643 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44981 +20 +-2.99643 +11 +5.44971 +21 +-2.99701 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44971 +20 +-2.99701 +11 +5.44973 +21 +-2.99715 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44973 +20 +-2.99715 +11 +5.44785 +21 +-3.00465 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44785 +20 +-3.00465 +11 +5.44764 +21 +-3.00511 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44764 +20 +-3.00511 +11 +5.44763 +21 +-3.00525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44763 +20 +-3.00525 +11 +5.44575 +21 +-3.009 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44575 +20 +-3.009 +11 +5.44523 +21 +-3.00971 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44523 +20 +-3.00971 +11 +5.4452 +21 +-3.00977 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4452 +20 +-3.00977 +11 +5.44333 +21 +-3.01165 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44333 +20 +-3.01165 +11 +5.4426 +21 +-3.01215 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4426 +20 +-3.01215 +11 +5.44256 +21 +-3.0122 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44256 +20 +-3.0122 +11 +5.43881 +21 +-3.01407 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43881 +20 +-3.01407 +11 +5.43783 +21 +-3.01437 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43783 +20 +-3.01437 +11 +5.43765 +21 +-3.01432 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43765 +20 +-3.01432 +11 +5.43749 +21 +-3.01439 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43749 +20 +-3.01439 +11 +5.43374 +21 +-3.01439 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43374 +20 +-3.01439 +11 +5.43273 +21 +-3.01421 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43273 +20 +-3.01421 +11 +5.43259 +21 +-3.01409 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43259 +20 +-3.01409 +11 +5.43242 +21 +-3.01407 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43242 +20 +-3.01407 +11 +5.42867 +21 +-3.0122 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42867 +20 +-3.0122 +11 +5.42796 +21 +-3.01167 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42796 +20 +-3.01167 +11 +5.4279 +21 +-3.01165 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4279 +20 +-3.01165 +11 +5.42603 +21 +-3.00977 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42603 +20 +-3.00977 +11 +5.42552 +21 +-3.00905 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42552 +20 +-3.00905 +11 +5.42547 +21 +-3.009 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42547 +20 +-3.009 +11 +5.4236 +21 +-3.00525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4236 +20 +-3.00525 +11 +5.42345 +21 +-3.00477 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42345 +20 +-3.00477 +11 +5.42337 +21 +-3.00465 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42337 +20 +-3.00465 +11 +5.4215 +21 +-2.99715 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4215 +20 +-2.99715 +11 +5.42146 +21 +-2.99656 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42146 +20 +-2.99656 +11 +5.42141 +21 +-2.99643 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42141 +20 +-2.99643 +11 +5.42141 +21 +-2.98706 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42141 +20 +-2.98706 +11 +5.42151 +21 +-2.98648 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42151 +20 +-2.98648 +11 +5.4215 +21 +-2.98634 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4215 +20 +-2.98634 +11 +5.42337 +21 +-2.97885 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42337 +20 +-2.97885 +11 +5.42358 +21 +-2.97838 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42358 +20 +-2.97838 +11 +5.4236 +21 +-2.97824 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4236 +20 +-2.97824 +11 +5.42547 +21 +-2.97449 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42547 +20 +-2.97449 +11 +5.426 +21 +-2.97378 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.426 +20 +-2.97378 +11 +5.42603 +21 +-2.97372 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42603 +20 +-2.97372 +11 +5.4279 +21 +-2.97185 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4279 +20 +-2.97185 +11 +5.42862 +21 +-2.97134 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42862 +20 +-2.97134 +11 +5.42867 +21 +-2.9713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42867 +20 +-2.9713 +11 +5.43242 +21 +-2.96942 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43242 +20 +-2.96942 +11 +5.4334 +21 +-2.96913 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4334 +20 +-2.96913 +11 +5.43357 +21 +-2.96917 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43357 +20 +-2.96917 +11 +5.43374 +21 +-2.96911 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43374 +20 +-2.96911 +11 +5.43749 +21 +-2.96911 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43749 +20 +-2.96911 +11 +5.4385 +21 +-2.96929 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43444 +20 +-2.97501 +11 +5.43174 +21 +-2.97636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43174 +20 +-2.97636 +11 +5.43054 +21 +-2.97756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43054 +20 +-2.97756 +11 +5.42903 +21 +-2.98059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42903 +20 +-2.98059 +11 +5.42732 +21 +-2.98742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42732 +20 +-2.98742 +11 +5.42732 +21 +-2.99607 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42732 +20 +-2.99607 +11 +5.42903 +21 +-3.0029 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42903 +20 +-3.0029 +11 +5.43054 +21 +-3.00593 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43054 +20 +-3.00593 +11 +5.43174 +21 +-3.00713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43174 +20 +-3.00713 +11 +5.43444 +21 +-3.00848 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43444 +20 +-3.00848 +11 +5.43679 +21 +-3.00848 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43679 +20 +-3.00848 +11 +5.43949 +21 +-3.00713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43949 +20 +-3.00713 +11 +5.44069 +21 +-3.00593 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44069 +20 +-3.00593 +11 +5.4422 +21 +-3.0029 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4422 +20 +-3.0029 +11 +5.44391 +21 +-2.99607 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44391 +20 +-2.99607 +11 +5.44391 +21 +-2.98742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44391 +20 +-2.98742 +11 +5.4422 +21 +-2.98059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4422 +20 +-2.98059 +11 +5.44069 +21 +-2.97756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44069 +20 +-2.97756 +11 +5.43949 +21 +-2.97636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43949 +20 +-2.97636 +11 +5.43679 +21 +-2.97501 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43679 +20 +-2.97501 +11 +5.43444 +21 +-2.97501 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39846 +20 +-2.96918 +11 +5.39863 +21 +-2.96915 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39863 +20 +-2.96915 +11 +5.39937 +21 +-2.96958 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39937 +20 +-2.96958 +11 +5.40016 +21 +-2.96993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40016 +20 +-2.96993 +11 +5.40023 +21 +-2.97008 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40023 +20 +-2.97008 +11 +5.40038 +21 +-2.97016 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40038 +20 +-2.97016 +11 +5.40067 +21 +-2.97097 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40067 +20 +-2.97097 +11 +5.40105 +21 +-2.97174 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40105 +20 +-2.97174 +11 +5.40101 +21 +-2.9719 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40101 +20 +-2.9719 +11 +5.40107 +21 +-2.97206 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40107 +20 +-2.97206 +11 +5.40107 +21 +-3.00848 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40107 +20 +-3.00848 +11 +5.40937 +21 +-3.00848 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40937 +20 +-3.00848 +11 +5.41038 +21 +-3.00866 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41038 +20 +-3.00866 +11 +5.41192 +21 +-3.00996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41192 +20 +-3.00996 +11 +5.41227 +21 +-3.01195 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41227 +20 +-3.01195 +11 +5.41126 +21 +-3.01369 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41126 +20 +-3.01369 +11 +5.40937 +21 +-3.01439 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40937 +20 +-3.01439 +11 +5.38687 +21 +-3.01439 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38687 +20 +-3.01439 +11 +5.38586 +21 +-3.01421 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38586 +20 +-3.01421 +11 +5.38431 +21 +-3.01291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38431 +20 +-3.01291 +11 +5.38396 +21 +-3.01092 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38396 +20 +-3.01092 +11 +5.38497 +21 +-3.00917 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38497 +20 +-3.00917 +11 +5.38687 +21 +-3.00848 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38687 +20 +-3.00848 +11 +5.39516 +21 +-3.00848 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39516 +20 +-3.00848 +11 +5.39516 +21 +-2.98107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39516 +20 +-2.98107 +11 +5.39271 +21 +-2.98352 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39271 +20 +-2.98352 +11 +5.39198 +21 +-2.98403 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39198 +20 +-2.98403 +11 +5.39194 +21 +-2.98408 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39194 +20 +-2.98408 +11 +5.38819 +21 +-2.98595 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38819 +20 +-2.98595 +11 +5.38721 +21 +-2.98624 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38721 +20 +-2.98624 +11 +5.38524 +21 +-2.98577 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38524 +20 +-2.98577 +11 +5.38404 +21 +-2.98415 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38404 +20 +-2.98415 +11 +5.38416 +21 +-2.98214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38416 +20 +-2.98214 +11 +5.38555 +21 +-2.98067 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38555 +20 +-2.98067 +11 +5.38887 +21 +-2.97901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38887 +20 +-2.97901 +11 +5.39207 +21 +-2.97581 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39207 +20 +-2.97581 +11 +5.39566 +21 +-2.97042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39566 +20 +-2.97042 +11 +5.39637 +21 +-2.96968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39637 +20 +-2.96968 +11 +5.39653 +21 +-2.96964 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39653 +20 +-2.96964 +11 +5.39664 +21 +-2.96951 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39664 +20 +-2.96951 +11 +5.39749 +21 +-2.96936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39749 +20 +-2.96936 +11 +5.39831 +21 +-2.96912 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39831 +20 +-2.96912 +11 +5.39846 +21 +-2.96918 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.56598 +20 +-2.96929 +11 +5.56612 +21 +-2.9694 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.56612 +20 +-2.9694 +11 +5.56629 +21 +-2.96942 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.56629 +20 +-2.96942 +11 +5.57004 +21 +-2.9713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57004 +20 +-2.9713 +11 +5.57075 +21 +-2.97182 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57075 +20 +-2.97182 +11 +5.57081 +21 +-2.97185 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57081 +20 +-2.97185 +11 +5.57268 +21 +-2.97372 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57268 +20 +-2.97372 +11 +5.57319 +21 +-2.97445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57319 +20 +-2.97445 +11 +5.57324 +21 +-2.97449 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57324 +20 +-2.97449 +11 +5.57511 +21 +-2.97824 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57511 +20 +-2.97824 +11 +5.5754 +21 +-2.97922 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5754 +20 +-2.97922 +11 +5.57536 +21 +-2.9794 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57536 +20 +-2.9794 +11 +5.57542 +21 +-2.97956 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57542 +20 +-2.97956 +11 +5.57542 +21 +-2.98519 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57542 +20 +-2.98519 +11 +5.57525 +21 +-2.9862 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57525 +20 +-2.9862 +11 +5.57513 +21 +-2.98633 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57513 +20 +-2.98633 +11 +5.57511 +21 +-2.98651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57511 +20 +-2.98651 +11 +5.57324 +21 +-2.99026 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57324 +20 +-2.99026 +11 +5.57271 +21 +-2.99096 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57271 +20 +-2.99096 +11 +5.57268 +21 +-2.99102 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57268 +20 +-2.99102 +11 +5.57081 +21 +-2.9929 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57081 +20 +-2.9929 +11 +5.57009 +21 +-2.9934 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57009 +20 +-2.9934 +11 +5.57004 +21 +-2.99345 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57004 +20 +-2.99345 +11 +5.56629 +21 +-2.99533 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.56629 +20 +-2.99533 +11 +5.56531 +21 +-2.99562 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.56531 +20 +-2.99562 +11 +5.56514 +21 +-2.99558 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.56514 +20 +-2.99558 +11 +5.56501 +21 +-2.99562 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.56501 +20 +-2.99562 +11 +5.57489 +21 +-3.00974 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57489 +20 +-3.00974 +11 +5.57532 +21 +-3.01067 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57532 +20 +-3.01067 +11 +5.57515 +21 +-3.01268 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57515 +20 +-3.01268 +11 +5.57372 +21 +-3.01411 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57372 +20 +-3.01411 +11 +5.57171 +21 +-3.01428 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57171 +20 +-3.01428 +11 +5.57005 +21 +-3.01313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.57005 +20 +-3.01313 +11 +5.55781 +21 +-2.99564 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55781 +20 +-2.99564 +11 +5.55293 +21 +-2.99564 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55293 +20 +-2.99564 +11 +5.55293 +21 +-3.01143 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55293 +20 +-3.01143 +11 +5.55275 +21 +-3.01244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55275 +20 +-3.01244 +11 +5.55145 +21 +-3.01399 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55145 +20 +-3.01399 +11 +5.54946 +21 +-3.01434 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54946 +20 +-3.01434 +11 +5.54771 +21 +-3.01333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54771 +20 +-3.01333 +11 +5.54702 +21 +-3.01143 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54702 +20 +-3.01143 +11 +5.54702 +21 +-2.97206 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54702 +20 +-2.97206 +11 +5.54709 +21 +-2.97168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54709 +20 +-2.97168 +11 +5.54707 +21 +-2.97155 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54707 +20 +-2.97155 +11 +5.54713 +21 +-2.97144 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54713 +20 +-2.97144 +11 +5.5472 +21 +-2.97105 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5472 +20 +-2.97105 +11 +5.54769 +21 +-2.97046 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54769 +20 +-2.97046 +11 +5.54808 +21 +-2.9698 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54808 +20 +-2.9698 +11 +5.54833 +21 +-2.96971 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54833 +20 +-2.96971 +11 +5.5485 +21 +-2.96951 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5485 +20 +-2.96951 +11 +5.54925 +21 +-2.96937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54925 +20 +-2.96937 +11 +5.54997 +21 +-2.96911 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54997 +20 +-2.96911 +11 +5.56497 +21 +-2.96911 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.56497 +20 +-2.96911 +11 +5.56598 +21 +-2.96929 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55293 +20 +-2.97501 +11 +5.55293 +21 +-2.98973 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55293 +20 +-2.98973 +11 +5.56427 +21 +-2.98973 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.56427 +20 +-2.98973 +11 +5.56697 +21 +-2.98838 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.56697 +20 +-2.98838 +11 +5.56817 +21 +-2.98719 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.56817 +20 +-2.98719 +11 +5.56952 +21 +-2.98449 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.56952 +20 +-2.98449 +11 +5.56952 +21 +-2.98026 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.56952 +20 +-2.98026 +11 +5.56817 +21 +-2.97756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.56817 +20 +-2.97756 +11 +5.56697 +21 +-2.97636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.56697 +20 +-2.97636 +11 +5.56427 +21 +-2.97501 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.56427 +20 +-2.97501 +11 +5.55293 +21 +-2.97501 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36538 +20 +-2.96929 +11 +5.36552 +21 +-2.9694 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36552 +20 +-2.9694 +11 +5.36569 +21 +-2.96942 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36569 +20 +-2.96942 +11 +5.36944 +21 +-2.9713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36944 +20 +-2.9713 +11 +5.37015 +21 +-2.97182 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37015 +20 +-2.97182 +11 +5.37021 +21 +-2.97185 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37021 +20 +-2.97185 +11 +5.37208 +21 +-2.97372 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37208 +20 +-2.97372 +11 +5.37259 +21 +-2.97445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37259 +20 +-2.97445 +11 +5.37264 +21 +-2.97449 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37264 +20 +-2.97449 +11 +5.37451 +21 +-2.97824 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37451 +20 +-2.97824 +11 +5.3748 +21 +-2.97922 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3748 +20 +-2.97922 +11 +5.37476 +21 +-2.9794 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37476 +20 +-2.9794 +11 +5.37482 +21 +-2.97956 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37482 +20 +-2.97956 +11 +5.37482 +21 +-2.98519 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37482 +20 +-2.98519 +11 +5.37465 +21 +-2.9862 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37465 +20 +-2.9862 +11 +5.37453 +21 +-2.98633 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37453 +20 +-2.98633 +11 +5.37451 +21 +-2.98651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37451 +20 +-2.98651 +11 +5.37264 +21 +-2.99026 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37264 +20 +-2.99026 +11 +5.37211 +21 +-2.99096 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37211 +20 +-2.99096 +11 +5.37208 +21 +-2.99102 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37208 +20 +-2.99102 +11 +5.37021 +21 +-2.9929 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37021 +20 +-2.9929 +11 +5.36949 +21 +-2.9934 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36949 +20 +-2.9934 +11 +5.36944 +21 +-2.99345 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36944 +20 +-2.99345 +11 +5.36569 +21 +-2.99533 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36569 +20 +-2.99533 +11 +5.36471 +21 +-2.99562 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36471 +20 +-2.99562 +11 +5.36454 +21 +-2.99558 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36454 +20 +-2.99558 +11 +5.36441 +21 +-2.99562 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36441 +20 +-2.99562 +11 +5.37429 +21 +-3.00974 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37429 +20 +-3.00974 +11 +5.37472 +21 +-3.01067 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37472 +20 +-3.01067 +11 +5.37455 +21 +-3.01268 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37455 +20 +-3.01268 +11 +5.37312 +21 +-3.01411 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37312 +20 +-3.01411 +11 +5.37111 +21 +-3.01428 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37111 +20 +-3.01428 +11 +5.36945 +21 +-3.01313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36945 +20 +-3.01313 +11 +5.35721 +21 +-2.99564 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.35721 +20 +-2.99564 +11 +5.35233 +21 +-2.99564 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.35233 +20 +-2.99564 +11 +5.35233 +21 +-3.01143 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.35233 +20 +-3.01143 +11 +5.35215 +21 +-3.01244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.35215 +20 +-3.01244 +11 +5.35085 +21 +-3.01399 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.35085 +20 +-3.01399 +11 +5.34886 +21 +-3.01434 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34886 +20 +-3.01434 +11 +5.34711 +21 +-3.01333 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34711 +20 +-3.01333 +11 +5.34642 +21 +-3.01143 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34642 +20 +-3.01143 +11 +5.34642 +21 +-2.97206 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34642 +20 +-2.97206 +11 +5.34649 +21 +-2.97168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34649 +20 +-2.97168 +11 +5.34647 +21 +-2.97155 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34647 +20 +-2.97155 +11 +5.34653 +21 +-2.97144 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34653 +20 +-2.97144 +11 +5.3466 +21 +-2.97105 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3466 +20 +-2.97105 +11 +5.34709 +21 +-2.97046 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34709 +20 +-2.97046 +11 +5.34748 +21 +-2.9698 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34748 +20 +-2.9698 +11 +5.34773 +21 +-2.96971 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34773 +20 +-2.96971 +11 +5.3479 +21 +-2.96951 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3479 +20 +-2.96951 +11 +5.34865 +21 +-2.96937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34865 +20 +-2.96937 +11 +5.34937 +21 +-2.96911 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34937 +20 +-2.96911 +11 +5.36437 +21 +-2.96911 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36437 +20 +-2.96911 +11 +5.36538 +21 +-2.96929 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.35233 +20 +-2.97501 +11 +5.35233 +21 +-2.98973 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.35233 +20 +-2.98973 +11 +5.36367 +21 +-2.98973 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36367 +20 +-2.98973 +11 +5.36637 +21 +-2.98838 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36637 +20 +-2.98838 +11 +5.36757 +21 +-2.98719 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36757 +20 +-2.98719 +11 +5.36892 +21 +-2.98449 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36892 +20 +-2.98449 +11 +5.36892 +21 +-2.98026 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36892 +20 +-2.98026 +11 +5.36757 +21 +-2.97756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36757 +20 +-2.97756 +11 +5.36637 +21 +-2.97636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36637 +20 +-2.97636 +11 +5.36367 +21 +-2.97501 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36367 +20 +-2.97501 +11 +5.35233 +21 +-2.97501 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20968 +20 +-3.00454 +11 +6.21038 +21 +-3.00621 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21038 +20 +-3.00621 +11 +6.20968 +21 +-3.00788 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20968 +20 +-3.00788 +11 +6.20801 +21 +-3.00857 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20801 +20 +-3.00857 +11 +6.19014 +21 +-3.00857 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19014 +20 +-3.00857 +11 +6.18846 +21 +-3.00788 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18846 +20 +-3.00788 +11 +6.18777 +21 +-3.00621 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18777 +20 +-3.00621 +11 +6.18846 +21 +-3.00454 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18846 +20 +-3.00454 +11 +6.19014 +21 +-3.00385 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19014 +20 +-3.00385 +11 +6.20801 +21 +-3.00385 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20801 +20 +-3.00385 +11 +6.20968 +21 +-3.00454 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59554 +20 +-2.87065 +11 +6.59721 +21 +-2.87135 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59721 +20 +-2.87135 +11 +6.5979 +21 +-2.87302 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5979 +20 +-2.87302 +11 +6.5979 +21 +-3.00136 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5979 +20 +-3.00136 +11 +6.59721 +21 +-3.00303 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59721 +20 +-3.00303 +11 +6.59554 +21 +-3.00372 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59554 +20 +-3.00372 +11 +6.59387 +21 +-3.00303 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59387 +20 +-3.00303 +11 +6.59318 +21 +-3.00136 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59318 +20 +-3.00136 +11 +6.59318 +21 +-2.87538 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59318 +20 +-2.87538 +11 +6.53097 +21 +-2.87538 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53097 +20 +-2.87538 +11 +6.53097 +21 +-3.00136 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53097 +20 +-3.00136 +11 +6.53028 +21 +-3.00303 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53028 +20 +-3.00303 +11 +6.52861 +21 +-3.00372 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52861 +20 +-3.00372 +11 +6.52694 +21 +-3.00303 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52694 +20 +-3.00303 +11 +6.52625 +21 +-3.00136 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52625 +20 +-3.00136 +11 +6.52625 +21 +-2.87302 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52625 +20 +-2.87302 +11 +6.52694 +21 +-2.87135 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52694 +20 +-2.87135 +11 +6.52861 +21 +-2.87065 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52861 +20 +-2.87065 +11 +6.59554 +21 +-2.87065 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14648 +20 +-2.97878 +11 +6.14992 +21 +-2.98167 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14992 +20 +-2.98167 +11 +6.15217 +21 +-2.98557 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15217 +20 +-2.98557 +11 +6.15295 +21 +-2.99 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15295 +20 +-2.99 +11 +6.15217 +21 +-2.99443 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15217 +20 +-2.99443 +11 +6.14992 +21 +-2.99833 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14992 +20 +-2.99833 +11 +6.14648 +21 +-3.00122 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14648 +20 +-3.00122 +11 +6.14225 +21 +-3.00276 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14225 +20 +-3.00276 +11 +6.13775 +21 +-3.00276 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13775 +20 +-3.00276 +11 +6.13352 +21 +-3.00122 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13352 +20 +-3.00122 +11 +6.13008 +21 +-2.99833 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13008 +20 +-2.99833 +11 +6.12783 +21 +-2.99443 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12783 +20 +-2.99443 +11 +6.12705 +21 +-2.99 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12705 +20 +-2.99 +11 +6.12783 +21 +-2.98557 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12783 +20 +-2.98557 +11 +6.13008 +21 +-2.98167 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13008 +20 +-2.98167 +11 +6.13352 +21 +-2.97878 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13352 +20 +-2.97878 +11 +6.13775 +21 +-2.97724 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13775 +20 +-2.97724 +11 +6.14225 +21 +-2.97724 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14225 +20 +-2.97724 +11 +6.14648 +21 +-2.97878 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53224 +20 +-2.99366 +11 +5.53378 +21 +-2.99496 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53378 +20 +-2.99496 +11 +5.53413 +21 +-2.99695 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53413 +20 +-2.99695 +11 +5.53312 +21 +-2.9987 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53312 +20 +-2.9987 +11 +5.53123 +21 +-2.99939 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53123 +20 +-2.99939 +11 +5.50123 +21 +-2.99939 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50123 +20 +-2.99939 +11 +5.50022 +21 +-2.99921 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50022 +20 +-2.99921 +11 +5.49867 +21 +-2.99791 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49867 +20 +-2.99791 +11 +5.49832 +21 +-2.99592 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49832 +20 +-2.99592 +11 +5.49933 +21 +-2.99417 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49933 +20 +-2.99417 +11 +5.50123 +21 +-2.99348 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50123 +20 +-2.99348 +11 +5.53123 +21 +-2.99348 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53123 +20 +-2.99348 +11 +5.53224 +21 +-2.99366 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16314 +20 +-2.77271 +11 +6.16383 +21 +-2.77438 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16383 +20 +-2.77438 +11 +6.16383 +21 +-2.85115 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16383 +20 +-2.85115 +11 +6.16383 +21 +-2.98698 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16383 +20 +-2.98698 +11 +6.16314 +21 +-2.98865 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16314 +20 +-2.98865 +11 +6.16147 +21 +-2.98934 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16147 +20 +-2.98934 +11 +6.1598 +21 +-2.98865 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1598 +20 +-2.98865 +11 +6.15911 +21 +-2.98698 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15911 +20 +-2.98698 +11 +6.15911 +21 +-2.85115 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15911 +20 +-2.85115 +11 +6.15911 +21 +-2.77438 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15911 +20 +-2.77438 +11 +6.1598 +21 +-2.77271 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1598 +20 +-2.77271 +11 +6.16147 +21 +-2.77202 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16147 +20 +-2.77202 +11 +6.16314 +21 +-2.77271 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93468 +20 +-2.97514 +11 +5.93538 +21 +-2.97681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93538 +20 +-2.97681 +11 +5.93468 +21 +-2.97848 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93468 +20 +-2.97848 +11 +5.93301 +21 +-2.97917 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93301 +20 +-2.97917 +11 +5.91514 +21 +-2.97917 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91514 +20 +-2.97917 +11 +5.91346 +21 +-2.97848 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91346 +20 +-2.97848 +11 +5.91277 +21 +-2.97681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91277 +20 +-2.97681 +11 +5.91346 +21 +-2.97514 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91346 +20 +-2.97514 +11 +5.91514 +21 +-2.97445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91514 +20 +-2.97445 +11 +5.93301 +21 +-2.97445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93301 +20 +-2.97445 +11 +5.93468 +21 +-2.97514 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66498 +20 +-2.92447 +11 +6.66653 +21 +-2.92577 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66653 +20 +-2.92577 +11 +6.66688 +21 +-2.92776 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66688 +20 +-2.92776 +11 +6.66587 +21 +-2.92951 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66587 +20 +-2.92951 +11 +6.66397 +21 +-2.9302 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66397 +20 +-2.9302 +11 +6.64789 +21 +-2.9302 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64789 +20 +-2.9302 +11 +6.64692 +21 +-2.93997 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64692 +20 +-2.93997 +11 +6.64765 +21 +-2.9396 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64765 +20 +-2.9396 +11 +6.64863 +21 +-2.93931 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64863 +20 +-2.93931 +11 +6.6488 +21 +-2.93935 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6488 +20 +-2.93935 +11 +6.64897 +21 +-2.93929 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64897 +20 +-2.93929 +11 +6.65834 +21 +-2.93929 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65834 +20 +-2.93929 +11 +6.65935 +21 +-2.93947 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65935 +20 +-2.93947 +11 +6.65949 +21 +-2.93958 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65949 +20 +-2.93958 +11 +6.65966 +21 +-2.9396 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65966 +20 +-2.9396 +11 +6.66341 +21 +-2.94148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66341 +20 +-2.94148 +11 +6.66412 +21 +-2.942 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66412 +20 +-2.942 +11 +6.66418 +21 +-2.94203 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66418 +20 +-2.94203 +11 +6.66606 +21 +-2.9439 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66606 +20 +-2.9439 +11 +6.66656 +21 +-2.94463 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66656 +20 +-2.94463 +11 +6.66661 +21 +-2.94467 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66661 +20 +-2.94467 +11 +6.66848 +21 +-2.94842 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66848 +20 +-2.94842 +11 +6.66878 +21 +-2.9494 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66878 +20 +-2.9494 +11 +6.66874 +21 +-2.94957 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66874 +20 +-2.94957 +11 +6.6688 +21 +-2.94974 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6688 +20 +-2.94974 +11 +6.6688 +21 +-2.95911 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6688 +20 +-2.95911 +11 +6.66862 +21 +-2.96012 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66862 +20 +-2.96012 +11 +6.6685 +21 +-2.96026 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6685 +20 +-2.96026 +11 +6.66848 +21 +-2.96043 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66848 +20 +-2.96043 +11 +6.66661 +21 +-2.96418 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66661 +20 +-2.96418 +11 +6.66608 +21 +-2.96489 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66608 +20 +-2.96489 +11 +6.66606 +21 +-2.96495 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66606 +20 +-2.96495 +11 +6.66418 +21 +-2.96683 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66418 +20 +-2.96683 +11 +6.66346 +21 +-2.96733 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66346 +20 +-2.96733 +11 +6.66341 +21 +-2.96738 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66341 +20 +-2.96738 +11 +6.65966 +21 +-2.96925 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65966 +20 +-2.96925 +11 +6.65868 +21 +-2.96955 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65868 +20 +-2.96955 +11 +6.65851 +21 +-2.96951 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65851 +20 +-2.96951 +11 +6.65834 +21 +-2.96957 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65834 +20 +-2.96957 +11 +6.64897 +21 +-2.96957 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64897 +20 +-2.96957 +11 +6.64796 +21 +-2.96939 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64796 +20 +-2.96939 +11 +6.64783 +21 +-2.96927 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64783 +20 +-2.96927 +11 +6.64765 +21 +-2.96925 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64765 +20 +-2.96925 +11 +6.6439 +21 +-2.96738 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6439 +20 +-2.96738 +11 +6.64319 +21 +-2.96685 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64319 +20 +-2.96685 +11 +6.64313 +21 +-2.96683 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64313 +20 +-2.96683 +11 +6.64126 +21 +-2.96495 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64126 +20 +-2.96495 +11 +6.64067 +21 +-2.96411 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64067 +20 +-2.96411 +11 +6.64049 +21 +-2.9621 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64049 +20 +-2.9621 +11 +6.64165 +21 +-2.96045 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64165 +20 +-2.96045 +11 +6.6436 +21 +-2.95992 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6436 +20 +-2.95992 +11 +6.64543 +21 +-2.96078 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64543 +20 +-2.96078 +11 +6.64697 +21 +-2.96231 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64697 +20 +-2.96231 +11 +6.64967 +21 +-2.96366 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64967 +20 +-2.96366 +11 +6.65765 +21 +-2.96366 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65765 +20 +-2.96366 +11 +6.66034 +21 +-2.96231 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66034 +20 +-2.96231 +11 +6.66154 +21 +-2.96111 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66154 +20 +-2.96111 +11 +6.66289 +21 +-2.95842 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66289 +20 +-2.95842 +11 +6.66289 +21 +-2.95044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66289 +20 +-2.95044 +11 +6.66154 +21 +-2.94774 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66154 +20 +-2.94774 +11 +6.66034 +21 +-2.94654 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66034 +20 +-2.94654 +11 +6.65765 +21 +-2.94519 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65765 +20 +-2.94519 +11 +6.64967 +21 +-2.94519 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64967 +20 +-2.94519 +11 +6.64697 +21 +-2.94654 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64697 +20 +-2.94654 +11 +6.64543 +21 +-2.94808 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64543 +20 +-2.94808 +11 +6.64459 +21 +-2.94867 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64459 +20 +-2.94867 +11 +6.64457 +21 +-2.94867 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64457 +20 +-2.94867 +11 +6.64456 +21 +-2.94868 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64456 +20 +-2.94868 +11 +6.64357 +21 +-2.94876 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64357 +20 +-2.94876 +11 +6.64258 +21 +-2.94884 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64258 +20 +-2.94884 +11 +6.64257 +21 +-2.94883 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64257 +20 +-2.94883 +11 +6.64255 +21 +-2.94883 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64255 +20 +-2.94883 +11 +6.64174 +21 +-2.94825 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64174 +20 +-2.94825 +11 +6.64093 +21 +-2.94768 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64093 +20 +-2.94768 +11 +6.64092 +21 +-2.94767 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64092 +20 +-2.94767 +11 +6.64091 +21 +-2.94765 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64091 +20 +-2.94765 +11 +6.64066 +21 +-2.94669 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64066 +20 +-2.94669 +11 +6.6404 +21 +-2.94573 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6404 +20 +-2.94573 +11 +6.64041 +21 +-2.94572 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64041 +20 +-2.94572 +11 +6.64041 +21 +-2.9457 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64041 +20 +-2.9457 +11 +6.64228 +21 +-2.92695 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64228 +20 +-2.92695 +11 +6.64232 +21 +-2.9268 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64232 +20 +-2.9268 +11 +6.64231 +21 +-2.92673 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64231 +20 +-2.92673 +11 +6.64237 +21 +-2.92662 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64237 +20 +-2.92662 +11 +6.64256 +21 +-2.92596 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64256 +20 +-2.92596 +11 +6.64301 +21 +-2.92552 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64301 +20 +-2.92552 +11 +6.64332 +21 +-2.92498 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64332 +20 +-2.92498 +11 +6.64371 +21 +-2.92484 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64371 +20 +-2.92484 +11 +6.64401 +21 +-2.92455 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64401 +20 +-2.92455 +11 +6.64463 +21 +-2.9245 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64463 +20 +-2.9245 +11 +6.64522 +21 +-2.92429 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64522 +20 +-2.92429 +11 +6.66397 +21 +-2.92429 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66397 +20 +-2.92429 +11 +6.66498 +21 +-2.92447 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61609 +20 +-2.92444 +11 +6.61616 +21 +-2.92444 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61616 +20 +-2.92444 +11 +6.62178 +21 +-2.92632 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62178 +20 +-2.92632 +11 +6.62268 +21 +-2.92681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62268 +20 +-2.92681 +11 +6.62278 +21 +-2.92696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62278 +20 +-2.92696 +11 +6.62294 +21 +-2.92703 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62294 +20 +-2.92703 +11 +6.62669 +21 +-2.93078 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62669 +20 +-2.93078 +11 +6.62719 +21 +-2.9315 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62719 +20 +-2.9315 +11 +6.62724 +21 +-2.93155 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62724 +20 +-2.93155 +11 +6.62911 +21 +-2.9353 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62911 +20 +-2.9353 +11 +6.62926 +21 +-2.93579 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62926 +20 +-2.93579 +11 +6.62934 +21 +-2.9359 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62934 +20 +-2.9359 +11 +6.63121 +21 +-2.9434 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63121 +20 +-2.9434 +11 +6.63125 +21 +-2.94399 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63125 +20 +-2.94399 +11 +6.6313 +21 +-2.94412 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6313 +20 +-2.94412 +11 +6.6313 +21 +-2.94974 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6313 +20 +-2.94974 +11 +6.6312 +21 +-2.95032 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6312 +20 +-2.95032 +11 +6.63121 +21 +-2.95046 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63121 +20 +-2.95046 +11 +6.62934 +21 +-2.95796 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62934 +20 +-2.95796 +11 +6.62913 +21 +-2.95842 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62913 +20 +-2.95842 +11 +6.62911 +21 +-2.95856 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62911 +20 +-2.95856 +11 +6.62724 +21 +-2.96231 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62724 +20 +-2.96231 +11 +6.62671 +21 +-2.96302 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62671 +20 +-2.96302 +11 +6.62669 +21 +-2.96308 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62669 +20 +-2.96308 +11 +6.62294 +21 +-2.96683 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62294 +20 +-2.96683 +11 +6.6221 +21 +-2.96741 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6221 +20 +-2.96741 +11 +6.62192 +21 +-2.96743 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62192 +20 +-2.96743 +11 +6.62178 +21 +-2.96754 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62178 +20 +-2.96754 +11 +6.61616 +21 +-2.96941 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61616 +20 +-2.96941 +11 +6.61528 +21 +-2.96954 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61528 +20 +-2.96954 +11 +6.61522 +21 +-2.96957 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61522 +20 +-2.96957 +11 +6.60585 +21 +-2.96957 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60585 +20 +-2.96957 +11 +6.60547 +21 +-2.9695 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60547 +20 +-2.9695 +11 +6.60534 +21 +-2.96952 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60534 +20 +-2.96952 +11 +6.60522 +21 +-2.96946 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60522 +20 +-2.96946 +11 +6.60484 +21 +-2.96939 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60484 +20 +-2.96939 +11 +6.60425 +21 +-2.96889 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60425 +20 +-2.96889 +11 +6.60359 +21 +-2.96851 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60359 +20 +-2.96851 +11 +6.6035 +21 +-2.96826 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6035 +20 +-2.96826 +11 +6.60329 +21 +-2.96809 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60329 +20 +-2.96809 +11 +6.60316 +21 +-2.96733 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60316 +20 +-2.96733 +11 +6.6029 +21 +-2.96661 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6029 +20 +-2.96661 +11 +6.6029 +21 +-2.92724 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6029 +20 +-2.92724 +11 +6.60297 +21 +-2.92686 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60297 +20 +-2.92686 +11 +6.60294 +21 +-2.92673 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60294 +20 +-2.92673 +11 +6.60301 +21 +-2.92662 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60301 +20 +-2.92662 +11 +6.60308 +21 +-2.92623 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60308 +20 +-2.92623 +11 +6.60357 +21 +-2.92565 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60357 +20 +-2.92565 +11 +6.60395 +21 +-2.92498 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60395 +20 +-2.92498 +11 +6.6042 +21 +-2.92489 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6042 +20 +-2.92489 +11 +6.60437 +21 +-2.92469 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60437 +20 +-2.92469 +11 +6.60513 +21 +-2.92455 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60513 +20 +-2.92455 +11 +6.60585 +21 +-2.92429 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60585 +20 +-2.92429 +11 +6.61522 +21 +-2.92429 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61522 +20 +-2.92429 +11 +6.61609 +21 +-2.92444 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6088 +20 +-2.96366 +11 +6.61475 +21 +-2.96366 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61475 +20 +-2.96366 +11 +6.61925 +21 +-2.96216 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61925 +20 +-2.96216 +11 +6.62217 +21 +-2.95924 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62217 +20 +-2.95924 +11 +6.62369 +21 +-2.95621 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62369 +20 +-2.95621 +11 +6.6254 +21 +-2.94938 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6254 +20 +-2.94938 +11 +6.6254 +21 +-2.94448 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6254 +20 +-2.94448 +11 +6.62369 +21 +-2.93765 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62369 +20 +-2.93765 +11 +6.62217 +21 +-2.93462 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62217 +20 +-2.93462 +11 +6.61925 +21 +-2.9317 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61925 +20 +-2.9317 +11 +6.61475 +21 +-2.9302 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61475 +20 +-2.9302 +11 +6.6088 +21 +-2.9302 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6088 +20 +-2.9302 +11 +6.6088 +21 +-2.96366 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14038 +20 +-2.91732 +11 +6.14052 +21 +-2.91743 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14052 +20 +-2.91743 +11 +6.14069 +21 +-2.91745 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14069 +20 +-2.91745 +11 +6.14444 +21 +-2.91933 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14444 +20 +-2.91933 +11 +6.14515 +21 +-2.91985 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14515 +20 +-2.91985 +11 +6.14521 +21 +-2.91988 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14521 +20 +-2.91988 +11 +6.14708 +21 +-2.92176 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14708 +20 +-2.92176 +11 +6.14759 +21 +-2.92248 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14759 +20 +-2.92248 +11 +6.14764 +21 +-2.92252 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14764 +20 +-2.92252 +11 +6.14951 +21 +-2.92627 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14951 +20 +-2.92627 +11 +6.1498 +21 +-2.92726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1498 +20 +-2.92726 +11 +6.14976 +21 +-2.92743 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14976 +20 +-2.92743 +11 +6.14982 +21 +-2.92759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14982 +20 +-2.92759 +11 +6.14982 +21 +-2.93134 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14982 +20 +-2.93134 +11 +6.14967 +21 +-2.93221 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14967 +20 +-2.93221 +11 +6.14967 +21 +-2.93228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14967 +20 +-2.93228 +11 +6.1478 +21 +-2.9379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1478 +20 +-2.9379 +11 +6.14731 +21 +-2.9388 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14731 +20 +-2.9388 +11 +6.14716 +21 +-2.93889 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14716 +20 +-2.93889 +11 +6.14708 +21 +-2.93905 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14708 +20 +-2.93905 +11 +6.12963 +21 +-2.95651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12963 +20 +-2.95651 +11 +6.14687 +21 +-2.95651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14687 +20 +-2.95651 +11 +6.14788 +21 +-2.95669 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14788 +20 +-2.95669 +11 +6.14943 +21 +-2.95799 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14943 +20 +-2.95799 +11 +6.14978 +21 +-2.95998 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14978 +20 +-2.95998 +11 +6.14877 +21 +-2.96173 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14877 +20 +-2.96173 +11 +6.14687 +21 +-2.96242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14687 +20 +-2.96242 +11 +6.1225 +21 +-2.96242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1225 +20 +-2.96242 +11 +6.12186 +21 +-2.9623 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12186 +20 +-2.9623 +11 +6.12173 +21 +-2.96232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12173 +20 +-2.96232 +11 +6.12167 +21 +-2.96227 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12167 +20 +-2.96227 +11 +6.12149 +21 +-2.96224 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12149 +20 +-2.96224 +11 +6.12081 +21 +-2.96167 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12081 +20 +-2.96167 +11 +6.12008 +21 +-2.96116 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12008 +20 +-2.96116 +11 +6.12005 +21 +-2.96103 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12005 +20 +-2.96103 +11 +6.11994 +21 +-2.96094 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11994 +20 +-2.96094 +11 +6.11979 +21 +-2.96006 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11979 +20 +-2.96006 +11 +6.11956 +21 +-2.95921 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11956 +20 +-2.95921 +11 +6.11961 +21 +-2.95908 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11961 +20 +-2.95908 +11 +6.11959 +21 +-2.95895 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11959 +20 +-2.95895 +11 +6.12004 +21 +-2.95818 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12004 +20 +-2.95818 +11 +6.12041 +21 +-2.95738 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12041 +20 +-2.95738 +11 +6.14242 +21 +-2.93537 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14242 +20 +-2.93537 +11 +6.14392 +21 +-2.93086 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14392 +20 +-2.93086 +11 +6.14392 +21 +-2.92829 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14392 +20 +-2.92829 +11 +6.14257 +21 +-2.92559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14257 +20 +-2.92559 +11 +6.14137 +21 +-2.9244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14137 +20 +-2.9244 +11 +6.13867 +21 +-2.92305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13867 +20 +-2.92305 +11 +6.1307 +21 +-2.92305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1307 +20 +-2.92305 +11 +6.128 +21 +-2.9244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.128 +20 +-2.9244 +11 +6.12646 +21 +-2.92593 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12646 +20 +-2.92593 +11 +6.12562 +21 +-2.92652 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12562 +20 +-2.92652 +11 +6.12361 +21 +-2.9267 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12361 +20 +-2.9267 +11 +6.12196 +21 +-2.92554 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12196 +20 +-2.92554 +11 +6.12143 +21 +-2.92359 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12143 +20 +-2.92359 +11 +6.12229 +21 +-2.92176 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12229 +20 +-2.92176 +11 +6.12416 +21 +-2.91988 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12416 +20 +-2.91988 +11 +6.12488 +21 +-2.91937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12488 +20 +-2.91937 +11 +6.12493 +21 +-2.91933 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12493 +20 +-2.91933 +11 +6.12868 +21 +-2.91745 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12868 +20 +-2.91745 +11 +6.12966 +21 +-2.91716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12966 +20 +-2.91716 +11 +6.12983 +21 +-2.9172 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12983 +20 +-2.9172 +11 +6.13 +21 +-2.91714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13 +20 +-2.91714 +11 +6.13937 +21 +-2.91714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13937 +20 +-2.91714 +11 +6.14038 +21 +-2.91732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10976 +20 +-2.9182 +11 +6.11045 +21 +-2.92009 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11045 +20 +-2.92009 +11 +6.11045 +21 +-2.95196 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11045 +20 +-2.95196 +11 +6.11028 +21 +-2.95297 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11028 +20 +-2.95297 +11 +6.11016 +21 +-2.95311 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11016 +20 +-2.95311 +11 +6.11014 +21 +-2.95329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11014 +20 +-2.95329 +11 +6.10827 +21 +-2.95703 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10827 +20 +-2.95703 +11 +6.10774 +21 +-2.95774 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10774 +20 +-2.95774 +11 +6.10771 +21 +-2.9578 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10771 +20 +-2.9578 +11 +6.10584 +21 +-2.95968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10584 +20 +-2.95968 +11 +6.10512 +21 +-2.96018 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10512 +20 +-2.96018 +11 +6.10507 +21 +-2.96023 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10507 +20 +-2.96023 +11 +6.10132 +21 +-2.9621 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10132 +20 +-2.9621 +11 +6.10034 +21 +-2.9624 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10034 +20 +-2.9624 +11 +6.10017 +21 +-2.96236 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10017 +20 +-2.96236 +11 +6.1 +21 +-2.96242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1 +20 +-2.96242 +11 +6.0925 +21 +-2.96242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0925 +20 +-2.96242 +11 +6.09149 +21 +-2.96224 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09149 +20 +-2.96224 +11 +6.09136 +21 +-2.96212 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09136 +20 +-2.96212 +11 +6.09118 +21 +-2.9621 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09118 +20 +-2.9621 +11 +6.08743 +21 +-2.96023 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08743 +20 +-2.96023 +11 +6.08672 +21 +-2.9597 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08672 +20 +-2.9597 +11 +6.08667 +21 +-2.95968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08667 +20 +-2.95968 +11 +6.08479 +21 +-2.9578 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08479 +20 +-2.9578 +11 +6.08428 +21 +-2.95708 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08428 +20 +-2.95708 +11 +6.08424 +21 +-2.95703 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08424 +20 +-2.95703 +11 +6.08236 +21 +-2.95329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08236 +20 +-2.95329 +11 +6.08207 +21 +-2.9523 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08207 +20 +-2.9523 +11 +6.08211 +21 +-2.95213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08211 +20 +-2.95213 +11 +6.08205 +21 +-2.95196 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08205 +20 +-2.95196 +11 +6.08205 +21 +-2.92009 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08205 +20 +-2.92009 +11 +6.08223 +21 +-2.91908 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08223 +20 +-2.91908 +11 +6.08353 +21 +-2.91754 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08353 +20 +-2.91754 +11 +6.08552 +21 +-2.91719 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08552 +20 +-2.91719 +11 +6.08727 +21 +-2.9182 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08727 +20 +-2.9182 +11 +6.08796 +21 +-2.92009 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08796 +20 +-2.92009 +11 +6.08796 +21 +-2.95127 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08796 +20 +-2.95127 +11 +6.08931 +21 +-2.95397 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08931 +20 +-2.95397 +11 +6.0905 +21 +-2.95516 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0905 +20 +-2.95516 +11 +6.0932 +21 +-2.95651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0932 +20 +-2.95651 +11 +6.0993 +21 +-2.95651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0993 +20 +-2.95651 +11 +6.102 +21 +-2.95516 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.102 +20 +-2.95516 +11 +6.1032 +21 +-2.95397 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1032 +20 +-2.95397 +11 +6.10455 +21 +-2.95127 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10455 +20 +-2.95127 +11 +6.10455 +21 +-2.92009 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10455 +20 +-2.92009 +11 +6.10473 +21 +-2.91908 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10473 +20 +-2.91908 +11 +6.10602 +21 +-2.91754 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10602 +20 +-2.91754 +11 +6.10801 +21 +-2.91719 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10801 +20 +-2.91719 +11 +6.10976 +21 +-2.9182 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86376 +20 +-2.95301 +11 +5.86445 +21 +-2.95469 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86445 +20 +-2.95469 +11 +5.86376 +21 +-2.95636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86376 +20 +-2.95636 +11 +5.86209 +21 +-2.95705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86209 +20 +-2.95705 +11 +5.84421 +21 +-2.95705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84421 +20 +-2.95705 +11 +5.84254 +21 +-2.95636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84254 +20 +-2.95636 +11 +5.84185 +21 +-2.95469 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84185 +20 +-2.95469 +11 +5.84254 +21 +-2.95301 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84254 +20 +-2.95301 +11 +5.84421 +21 +-2.95232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84421 +20 +-2.95232 +11 +5.86209 +21 +-2.95232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86209 +20 +-2.95232 +11 +5.86376 +21 +-2.95301 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67061 +20 +-2.92727 +11 +5.6713 +21 +-2.92894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6713 +20 +-2.92894 +11 +5.67061 +21 +-2.93061 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67061 +20 +-2.93061 +11 +5.66894 +21 +-2.9313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66894 +20 +-2.9313 +11 +5.65106 +21 +-2.9313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65106 +20 +-2.9313 +11 +5.64939 +21 +-2.93061 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64939 +20 +-2.93061 +11 +5.6487 +21 +-2.92894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6487 +20 +-2.92894 +11 +5.64939 +21 +-2.92727 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64939 +20 +-2.92727 +11 +5.65106 +21 +-2.92657 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65106 +20 +-2.92657 +11 +5.66894 +21 +-2.92657 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66894 +20 +-2.92657 +11 +5.67061 +21 +-2.92727 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53561 +20 +-2.92727 +11 +5.5363 +21 +-2.92894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5363 +20 +-2.92894 +11 +5.53561 +21 +-2.93061 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53561 +20 +-2.93061 +11 +5.53394 +21 +-2.9313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53394 +20 +-2.9313 +11 +5.51606 +21 +-2.9313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51606 +20 +-2.9313 +11 +5.51439 +21 +-2.93061 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51439 +20 +-2.93061 +11 +5.5137 +21 +-2.92894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5137 +20 +-2.92894 +11 +5.51439 +21 +-2.92727 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51439 +20 +-2.92727 +11 +5.51606 +21 +-2.92657 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51606 +20 +-2.92657 +11 +5.53394 +21 +-2.92657 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53394 +20 +-2.92657 +11 +5.53561 +21 +-2.92727 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39968 +20 +-2.92727 +11 +5.40038 +21 +-2.92894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40038 +20 +-2.92894 +11 +5.39968 +21 +-2.93061 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39968 +20 +-2.93061 +11 +5.39801 +21 +-2.9313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39801 +20 +-2.9313 +11 +5.38014 +21 +-2.9313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38014 +20 +-2.9313 +11 +5.37846 +21 +-2.93061 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37846 +20 +-2.93061 +11 +5.37777 +21 +-2.92894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37777 +20 +-2.92894 +11 +5.37846 +21 +-2.92727 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37846 +20 +-2.92727 +11 +5.38014 +21 +-2.92657 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38014 +20 +-2.92657 +11 +5.39801 +21 +-2.92657 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39801 +20 +-2.92657 +11 +5.39968 +21 +-2.92727 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67061 +20 +-2.86939 +11 +5.6713 +21 +-2.87106 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6713 +20 +-2.87106 +11 +5.67061 +21 +-2.87273 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.67061 +20 +-2.87273 +11 +5.66894 +21 +-2.87343 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66894 +20 +-2.87343 +11 +5.65106 +21 +-2.87343 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65106 +20 +-2.87343 +11 +5.64939 +21 +-2.87273 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64939 +20 +-2.87273 +11 +5.6487 +21 +-2.87106 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6487 +20 +-2.87106 +11 +5.64939 +21 +-2.86939 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64939 +20 +-2.86939 +11 +5.65106 +21 +-2.8687 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65106 +20 +-2.8687 +11 +5.66894 +21 +-2.8687 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66894 +20 +-2.8687 +11 +5.67061 +21 +-2.86939 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53561 +20 +-2.86939 +11 +5.5363 +21 +-2.87106 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5363 +20 +-2.87106 +11 +5.53561 +21 +-2.87273 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53561 +20 +-2.87273 +11 +5.53394 +21 +-2.87343 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53394 +20 +-2.87343 +11 +5.51606 +21 +-2.87343 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51606 +20 +-2.87343 +11 +5.51439 +21 +-2.87273 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51439 +20 +-2.87273 +11 +5.5137 +21 +-2.87106 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5137 +20 +-2.87106 +11 +5.51439 +21 +-2.86939 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51439 +20 +-2.86939 +11 +5.51606 +21 +-2.8687 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51606 +20 +-2.8687 +11 +5.53394 +21 +-2.8687 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53394 +20 +-2.8687 +11 +5.53561 +21 +-2.86939 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39968 +20 +-2.86939 +11 +5.40038 +21 +-2.87106 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40038 +20 +-2.87106 +11 +5.39968 +21 +-2.87273 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39968 +20 +-2.87273 +11 +5.39801 +21 +-2.87343 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39801 +20 +-2.87343 +11 +5.38014 +21 +-2.87343 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38014 +20 +-2.87343 +11 +5.37846 +21 +-2.87273 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37846 +20 +-2.87273 +11 +5.37777 +21 +-2.87106 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37777 +20 +-2.87106 +11 +5.37846 +21 +-2.86939 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37846 +20 +-2.86939 +11 +5.38014 +21 +-2.8687 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38014 +20 +-2.8687 +11 +5.39801 +21 +-2.8687 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39801 +20 +-2.8687 +11 +5.39968 +21 +-2.86939 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72061 +20 +-2.78439 +11 +5.7213 +21 +-2.78606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7213 +20 +-2.78606 +11 +5.7213 +21 +-2.80394 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7213 +20 +-2.80394 +11 +5.72061 +21 +-2.80561 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72061 +20 +-2.80561 +11 +5.71894 +21 +-2.8063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71894 +20 +-2.8063 +11 +5.71727 +21 +-2.80561 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71727 +20 +-2.80561 +11 +5.71657 +21 +-2.80394 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71657 +20 +-2.80394 +11 +5.71657 +21 +-2.78606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71657 +20 +-2.78606 +11 +5.71727 +21 +-2.78439 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71727 +20 +-2.78439 +11 +5.71894 +21 +-2.7837 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71894 +20 +-2.7837 +11 +5.72061 +21 +-2.78439 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66273 +20 +-2.78439 +11 +5.66343 +21 +-2.78606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66343 +20 +-2.78606 +11 +5.66343 +21 +-2.80394 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66343 +20 +-2.80394 +11 +5.66273 +21 +-2.80561 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66273 +20 +-2.80561 +11 +5.66106 +21 +-2.8063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66106 +20 +-2.8063 +11 +5.65939 +21 +-2.80561 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65939 +20 +-2.80561 +11 +5.6587 +21 +-2.80394 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6587 +20 +-2.80394 +11 +5.6587 +21 +-2.78606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6587 +20 +-2.78606 +11 +5.65939 +21 +-2.78439 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65939 +20 +-2.78439 +11 +5.66106 +21 +-2.7837 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66106 +20 +-2.7837 +11 +5.66273 +21 +-2.78439 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39061 +20 +-2.78439 +11 +5.3913 +21 +-2.78606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3913 +20 +-2.78606 +11 +5.3913 +21 +-2.80394 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3913 +20 +-2.80394 +11 +5.39061 +21 +-2.80561 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39061 +20 +-2.80561 +11 +5.38894 +21 +-2.8063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38894 +20 +-2.8063 +11 +5.38727 +21 +-2.80561 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38727 +20 +-2.80561 +11 +5.38657 +21 +-2.80394 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38657 +20 +-2.80394 +11 +5.38657 +21 +-2.78606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38657 +20 +-2.78606 +11 +5.38727 +21 +-2.78439 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38727 +20 +-2.78439 +11 +5.38894 +21 +-2.7837 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38894 +20 +-2.7837 +11 +5.39061 +21 +-2.78439 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33273 +20 +-2.78439 +11 +5.33343 +21 +-2.78606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33343 +20 +-2.78606 +11 +5.33343 +21 +-2.80394 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33343 +20 +-2.80394 +11 +5.33273 +21 +-2.80561 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33273 +20 +-2.80561 +11 +5.33106 +21 +-2.8063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33106 +20 +-2.8063 +11 +5.32939 +21 +-2.80561 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.32939 +20 +-2.80561 +11 +5.3287 +21 +-2.80394 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3287 +20 +-2.80394 +11 +5.3287 +21 +-2.78606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3287 +20 +-2.78606 +11 +5.32939 +21 +-2.78439 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.32939 +20 +-2.78439 +11 +5.33106 +21 +-2.7837 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33106 +20 +-2.7837 +11 +5.33273 +21 +-2.78439 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72061 +20 +-2.64939 +11 +5.7213 +21 +-2.65106 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7213 +20 +-2.65106 +11 +5.7213 +21 +-2.66894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7213 +20 +-2.66894 +11 +5.72061 +21 +-2.67061 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72061 +20 +-2.67061 +11 +5.71894 +21 +-2.6713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71894 +20 +-2.6713 +11 +5.71727 +21 +-2.67061 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71727 +20 +-2.67061 +11 +5.71657 +21 +-2.66894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71657 +20 +-2.66894 +11 +5.71657 +21 +-2.65106 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71657 +20 +-2.65106 +11 +5.71727 +21 +-2.64939 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71727 +20 +-2.64939 +11 +5.71894 +21 +-2.6487 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71894 +20 +-2.6487 +11 +5.72061 +21 +-2.64939 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66273 +20 +-2.64939 +11 +5.66343 +21 +-2.65106 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66343 +20 +-2.65106 +11 +5.66343 +21 +-2.66894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66343 +20 +-2.66894 +11 +5.66273 +21 +-2.67061 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66273 +20 +-2.67061 +11 +5.66106 +21 +-2.6713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66106 +20 +-2.6713 +11 +5.65939 +21 +-2.67061 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65939 +20 +-2.67061 +11 +5.6587 +21 +-2.66894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6587 +20 +-2.66894 +11 +5.6587 +21 +-2.65106 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6587 +20 +-2.65106 +11 +5.65939 +21 +-2.64939 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65939 +20 +-2.64939 +11 +5.66106 +21 +-2.6487 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66106 +20 +-2.6487 +11 +5.66273 +21 +-2.64939 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39061 +20 +-2.64939 +11 +5.3913 +21 +-2.65106 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3913 +20 +-2.65106 +11 +5.3913 +21 +-2.66894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3913 +20 +-2.66894 +11 +5.39061 +21 +-2.67061 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39061 +20 +-2.67061 +11 +5.38894 +21 +-2.6713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38894 +20 +-2.6713 +11 +5.38727 +21 +-2.67061 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38727 +20 +-2.67061 +11 +5.38657 +21 +-2.66894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38657 +20 +-2.66894 +11 +5.38657 +21 +-2.65106 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38657 +20 +-2.65106 +11 +5.38727 +21 +-2.64939 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38727 +20 +-2.64939 +11 +5.38894 +21 +-2.6487 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38894 +20 +-2.6487 +11 +5.39061 +21 +-2.64939 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33273 +20 +-2.64939 +11 +5.33343 +21 +-2.65106 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33343 +20 +-2.65106 +11 +5.33343 +21 +-2.66894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33343 +20 +-2.66894 +11 +5.33273 +21 +-2.67061 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33273 +20 +-2.67061 +11 +5.33106 +21 +-2.6713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33106 +20 +-2.6713 +11 +5.32939 +21 +-2.67061 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.32939 +20 +-2.67061 +11 +5.3287 +21 +-2.66894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3287 +20 +-2.66894 +11 +5.3287 +21 +-2.65106 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3287 +20 +-2.65106 +11 +5.32939 +21 +-2.64939 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.32939 +20 +-2.64939 +11 +5.33106 +21 +-2.6487 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33106 +20 +-2.6487 +11 +5.33273 +21 +-2.64939 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39061 +20 +-2.51439 +11 +5.3913 +21 +-2.51606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3913 +20 +-2.51606 +11 +5.3913 +21 +-2.53394 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3913 +20 +-2.53394 +11 +5.39061 +21 +-2.53561 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39061 +20 +-2.53561 +11 +5.38894 +21 +-2.5363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38894 +20 +-2.5363 +11 +5.38727 +21 +-2.53561 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38727 +20 +-2.53561 +11 +5.38657 +21 +-2.53394 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38657 +20 +-2.53394 +11 +5.38657 +21 +-2.51606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38657 +20 +-2.51606 +11 +5.38727 +21 +-2.51439 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38727 +20 +-2.51439 +11 +5.38894 +21 +-2.5137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38894 +20 +-2.5137 +11 +5.39061 +21 +-2.51439 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33273 +20 +-2.51439 +11 +5.33343 +21 +-2.51606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33343 +20 +-2.51606 +11 +5.33343 +21 +-2.53394 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33343 +20 +-2.53394 +11 +5.33273 +21 +-2.53561 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33273 +20 +-2.53561 +11 +5.33106 +21 +-2.5363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33106 +20 +-2.5363 +11 +5.32939 +21 +-2.53561 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.32939 +20 +-2.53561 +11 +5.3287 +21 +-2.53394 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3287 +20 +-2.53394 +11 +5.3287 +21 +-2.51606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3287 +20 +-2.51606 +11 +5.32939 +21 +-2.51439 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.32939 +20 +-2.51439 +11 +5.33106 +21 +-2.5137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33106 +20 +-2.5137 +11 +5.33273 +21 +-2.51439 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39061 +20 +-2.38032 +11 +5.3913 +21 +-2.38199 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3913 +20 +-2.38199 +11 +5.3913 +21 +-2.39986 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3913 +20 +-2.39986 +11 +5.39061 +21 +-2.40154 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39061 +20 +-2.40154 +11 +5.38894 +21 +-2.40223 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38894 +20 +-2.40223 +11 +5.38727 +21 +-2.40154 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38727 +20 +-2.40154 +11 +5.38657 +21 +-2.39986 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38657 +20 +-2.39986 +11 +5.38657 +21 +-2.38199 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38657 +20 +-2.38199 +11 +5.38727 +21 +-2.38032 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38727 +20 +-2.38032 +11 +5.38894 +21 +-2.37962 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38894 +20 +-2.37962 +11 +5.39061 +21 +-2.38032 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33273 +20 +-2.38032 +11 +5.33343 +21 +-2.38199 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33343 +20 +-2.38199 +11 +5.33343 +21 +-2.39986 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33343 +20 +-2.39986 +11 +5.33273 +21 +-2.40154 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33273 +20 +-2.40154 +11 +5.33106 +21 +-2.40223 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33106 +20 +-2.40223 +11 +5.32939 +21 +-2.40154 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.32939 +20 +-2.40154 +11 +5.3287 +21 +-2.39986 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3287 +20 +-2.39986 +11 +5.3287 +21 +-2.38199 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3287 +20 +-2.38199 +11 +5.32939 +21 +-2.38032 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.32939 +20 +-2.38032 +11 +5.33106 +21 +-2.37962 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33106 +20 +-2.37962 +11 +5.33273 +21 +-2.38032 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39061 +20 +-2.24439 +11 +5.3913 +21 +-2.24606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3913 +20 +-2.24606 +11 +5.3913 +21 +-2.26394 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3913 +20 +-2.26394 +11 +5.39061 +21 +-2.26561 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39061 +20 +-2.26561 +11 +5.38894 +21 +-2.2663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38894 +20 +-2.2663 +11 +5.38727 +21 +-2.26561 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38727 +20 +-2.26561 +11 +5.38657 +21 +-2.26394 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38657 +20 +-2.26394 +11 +5.38657 +21 +-2.24606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38657 +20 +-2.24606 +11 +5.38727 +21 +-2.24439 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38727 +20 +-2.24439 +11 +5.38894 +21 +-2.2437 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38894 +20 +-2.2437 +11 +5.39061 +21 +-2.24439 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33273 +20 +-2.24439 +11 +5.33343 +21 +-2.24606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33343 +20 +-2.24606 +11 +5.33343 +21 +-2.26394 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33343 +20 +-2.26394 +11 +5.33273 +21 +-2.26561 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33273 +20 +-2.26561 +11 +5.33106 +21 +-2.2663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33106 +20 +-2.2663 +11 +5.32939 +21 +-2.26561 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.32939 +20 +-2.26561 +11 +5.3287 +21 +-2.26394 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3287 +20 +-2.26394 +11 +5.3287 +21 +-2.24606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3287 +20 +-2.24606 +11 +5.32939 +21 +-2.24439 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.32939 +20 +-2.24439 +11 +5.33106 +21 +-2.2437 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33106 +20 +-2.2437 +11 +5.33273 +21 +-2.24439 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40038 +20 +-2.18211 +11 +5.40051 +21 +-2.18209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40051 +20 +-2.18209 +11 +5.40063 +21 +-2.18216 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40063 +20 +-2.18216 +11 +5.40101 +21 +-2.18223 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40101 +20 +-2.18223 +11 +5.4016 +21 +-2.18272 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4016 +20 +-2.18272 +11 +5.40226 +21 +-2.1831 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40226 +20 +-2.1831 +11 +5.40235 +21 +-2.18335 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40235 +20 +-2.18335 +11 +5.40256 +21 +-2.18352 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40256 +20 +-2.18352 +11 +5.40269 +21 +-2.18428 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40269 +20 +-2.18428 +11 +5.40295 +21 +-2.185 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40295 +20 +-2.185 +11 +5.40295 +21 +-2.85705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40295 +20 +-2.85705 +11 +5.64705 +21 +-2.85705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64705 +20 +-2.85705 +11 +5.64705 +21 +-2.595 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64705 +20 +-2.595 +11 +5.64711 +21 +-2.59462 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64711 +20 +-2.59462 +11 +5.64709 +21 +-2.59449 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64709 +20 +-2.59449 +11 +5.64716 +21 +-2.59437 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64716 +20 +-2.59437 +11 +5.64723 +21 +-2.59399 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64723 +20 +-2.59399 +11 +5.64772 +21 +-2.5934 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64772 +20 +-2.5934 +11 +5.6481 +21 +-2.59274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6481 +20 +-2.59274 +11 +5.64835 +21 +-2.59265 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64835 +20 +-2.59265 +11 +5.64852 +21 +-2.59244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64852 +20 +-2.59244 +11 +5.64928 +21 +-2.59231 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64928 +20 +-2.59231 +11 +5.65 +21 +-2.59205 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65 +20 +-2.59205 +11 +5.73 +21 +-2.59205 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73 +20 +-2.59205 +11 +5.73038 +21 +-2.59211 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73038 +20 +-2.59211 +11 +5.73051 +21 +-2.59209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73051 +20 +-2.59209 +11 +5.73063 +21 +-2.59216 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73063 +20 +-2.59216 +11 +5.73101 +21 +-2.59223 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73101 +20 +-2.59223 +11 +5.7316 +21 +-2.59272 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7316 +20 +-2.59272 +11 +5.73226 +21 +-2.5931 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73226 +20 +-2.5931 +11 +5.73235 +21 +-2.59335 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73235 +20 +-2.59335 +11 +5.73256 +21 +-2.59352 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73256 +20 +-2.59352 +11 +5.73269 +21 +-2.59428 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73269 +20 +-2.59428 +11 +5.73295 +21 +-2.595 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73295 +20 +-2.595 +11 +5.73295 +21 +-2.94 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73295 +20 +-2.94 +11 +5.73289 +21 +-2.94038 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73289 +20 +-2.94038 +11 +5.73291 +21 +-2.94051 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73291 +20 +-2.94051 +11 +5.73284 +21 +-2.94063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73284 +20 +-2.94063 +11 +5.73277 +21 +-2.94101 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73277 +20 +-2.94101 +11 +5.73228 +21 +-2.9416 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73228 +20 +-2.9416 +11 +5.7319 +21 +-2.94226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7319 +20 +-2.94226 +11 +5.73165 +21 +-2.94235 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73165 +20 +-2.94235 +11 +5.73148 +21 +-2.94256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73148 +20 +-2.94256 +11 +5.73072 +21 +-2.94269 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73072 +20 +-2.94269 +11 +5.73 +21 +-2.94295 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73 +20 +-2.94295 +11 +5.32 +21 +-2.94295 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.32 +20 +-2.94295 +11 +5.31962 +21 +-2.94289 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.31962 +20 +-2.94289 +11 +5.31949 +21 +-2.94291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.31949 +20 +-2.94291 +11 +5.31937 +21 +-2.94284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.31937 +20 +-2.94284 +11 +5.31899 +21 +-2.94277 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.31899 +20 +-2.94277 +11 +5.3184 +21 +-2.94228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3184 +20 +-2.94228 +11 +5.31774 +21 +-2.9419 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.31774 +20 +-2.9419 +11 +5.31765 +21 +-2.94165 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.31765 +20 +-2.94165 +11 +5.31744 +21 +-2.94148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.31744 +20 +-2.94148 +11 +5.31731 +21 +-2.94072 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.31731 +20 +-2.94072 +11 +5.31705 +21 +-2.94 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.31705 +20 +-2.94 +11 +5.31705 +21 +-2.185 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.31705 +20 +-2.185 +11 +5.31711 +21 +-2.18462 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.31711 +20 +-2.18462 +11 +5.31709 +21 +-2.18449 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.31709 +20 +-2.18449 +11 +5.31716 +21 +-2.18437 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.31716 +20 +-2.18437 +11 +5.31723 +21 +-2.18399 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.31723 +20 +-2.18399 +11 +5.31772 +21 +-2.1834 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.31772 +20 +-2.1834 +11 +5.3181 +21 +-2.18274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3181 +20 +-2.18274 +11 +5.31835 +21 +-2.18265 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.31835 +20 +-2.18265 +11 +5.31852 +21 +-2.18244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.31852 +20 +-2.18244 +11 +5.31928 +21 +-2.18231 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.31928 +20 +-2.18231 +11 +5.32 +21 +-2.18205 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.32 +20 +-2.18205 +11 +5.4 +21 +-2.18205 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4 +20 +-2.18205 +11 +5.40038 +21 +-2.18211 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.32295 +20 +-2.18795 +11 +5.32295 +21 +-2.93705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.32295 +20 +-2.93705 +11 +5.72705 +21 +-2.93705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72705 +20 +-2.93705 +11 +5.72705 +21 +-2.59795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72705 +20 +-2.59795 +11 +5.65295 +21 +-2.59795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65295 +20 +-2.59795 +11 +5.65295 +21 +-2.86 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65295 +20 +-2.86 +11 +5.65289 +21 +-2.86038 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65289 +20 +-2.86038 +11 +5.65291 +21 +-2.86051 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65291 +20 +-2.86051 +11 +5.65284 +21 +-2.86063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65284 +20 +-2.86063 +11 +5.65277 +21 +-2.86101 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65277 +20 +-2.86101 +11 +5.65228 +21 +-2.8616 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65228 +20 +-2.8616 +11 +5.6519 +21 +-2.86226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6519 +20 +-2.86226 +11 +5.65165 +21 +-2.86235 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65165 +20 +-2.86235 +11 +5.65148 +21 +-2.86256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65148 +20 +-2.86256 +11 +5.65072 +21 +-2.86269 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65072 +20 +-2.86269 +11 +5.65 +21 +-2.86295 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65 +20 +-2.86295 +11 +5.4 +21 +-2.86295 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4 +20 +-2.86295 +11 +5.39962 +21 +-2.86289 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39962 +20 +-2.86289 +11 +5.39949 +21 +-2.86291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39949 +20 +-2.86291 +11 +5.39937 +21 +-2.86284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39937 +20 +-2.86284 +11 +5.39899 +21 +-2.86277 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39899 +20 +-2.86277 +11 +5.3984 +21 +-2.86228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3984 +20 +-2.86228 +11 +5.39774 +21 +-2.8619 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39774 +20 +-2.8619 +11 +5.39765 +21 +-2.86165 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39765 +20 +-2.86165 +11 +5.39744 +21 +-2.86148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39744 +20 +-2.86148 +11 +5.39731 +21 +-2.86072 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39731 +20 +-2.86072 +11 +5.39705 +21 +-2.86 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39705 +20 +-2.86 +11 +5.39705 +21 +-2.18795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39705 +20 +-2.18795 +11 +5.32295 +21 +-2.18795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51235 +20 +-2.77271 +11 +6.51304 +21 +-2.77438 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51304 +20 +-2.77438 +11 +6.51304 +21 +-2.85115 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51304 +20 +-2.85115 +11 +6.51304 +21 +-2.92792 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51304 +20 +-2.92792 +11 +6.51235 +21 +-2.92959 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51235 +20 +-2.92959 +11 +6.51068 +21 +-2.93028 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51068 +20 +-2.93028 +11 +6.50901 +21 +-2.92959 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50901 +20 +-2.92959 +11 +6.50832 +21 +-2.92792 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50832 +20 +-2.92792 +11 +6.50832 +21 +-2.85115 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50832 +20 +-2.85115 +11 +6.50832 +21 +-2.77438 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50832 +20 +-2.77438 +11 +6.50901 +21 +-2.77271 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50901 +20 +-2.77271 +11 +6.51068 +21 +-2.77202 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51068 +20 +-2.77202 +11 +6.51235 +21 +-2.77271 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12132 +20 +-2.85732 +11 +6.12145 +21 +-2.85743 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12145 +20 +-2.85743 +11 +6.12163 +21 +-2.85745 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12163 +20 +-2.85745 +11 +6.12538 +21 +-2.85933 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12538 +20 +-2.85933 +11 +6.12609 +21 +-2.85985 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12609 +20 +-2.85985 +11 +6.12614 +21 +-2.85988 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12614 +20 +-2.85988 +11 +6.12802 +21 +-2.86176 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12802 +20 +-2.86176 +11 +6.12853 +21 +-2.86248 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12853 +20 +-2.86248 +11 +6.12857 +21 +-2.86252 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12857 +20 +-2.86252 +11 +6.13045 +21 +-2.86627 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13045 +20 +-2.86627 +11 +6.13059 +21 +-2.86676 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13059 +20 +-2.86676 +11 +6.13067 +21 +-2.86688 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13067 +20 +-2.86688 +11 +6.13255 +21 +-2.87438 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13255 +20 +-2.87438 +11 +6.13259 +21 +-2.87496 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13259 +20 +-2.87496 +11 +6.13263 +21 +-2.87509 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13263 +20 +-2.87509 +11 +6.13263 +21 +-2.88447 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13263 +20 +-2.88447 +11 +6.13253 +21 +-2.88505 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13253 +20 +-2.88505 +11 +6.13255 +21 +-2.88518 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13255 +20 +-2.88518 +11 +6.13067 +21 +-2.89268 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13067 +20 +-2.89268 +11 +6.13046 +21 +-2.89315 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13046 +20 +-2.89315 +11 +6.13045 +21 +-2.89329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13045 +20 +-2.89329 +11 +6.12857 +21 +-2.89703 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12857 +20 +-2.89703 +11 +6.12805 +21 +-2.89774 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12805 +20 +-2.89774 +11 +6.12802 +21 +-2.8978 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12802 +20 +-2.8978 +11 +6.12614 +21 +-2.89968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12614 +20 +-2.89968 +11 +6.12542 +21 +-2.90018 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12542 +20 +-2.90018 +11 +6.12538 +21 +-2.90023 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12538 +20 +-2.90023 +11 +6.12163 +21 +-2.9021 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12163 +20 +-2.9021 +11 +6.12064 +21 +-2.9024 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12064 +20 +-2.9024 +11 +6.12047 +21 +-2.90236 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12047 +20 +-2.90236 +11 +6.12031 +21 +-2.90242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12031 +20 +-2.90242 +11 +6.11656 +21 +-2.90242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11656 +20 +-2.90242 +11 +6.11555 +21 +-2.90224 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11555 +20 +-2.90224 +11 +6.11541 +21 +-2.90212 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11541 +20 +-2.90212 +11 +6.11524 +21 +-2.9021 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11524 +20 +-2.9021 +11 +6.11149 +21 +-2.90023 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11149 +20 +-2.90023 +11 +6.11078 +21 +-2.8997 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11078 +20 +-2.8997 +11 +6.11072 +21 +-2.89968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11072 +20 +-2.89968 +11 +6.10885 +21 +-2.8978 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10885 +20 +-2.8978 +11 +6.10834 +21 +-2.89708 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10834 +20 +-2.89708 +11 +6.10829 +21 +-2.89703 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10829 +20 +-2.89703 +11 +6.10642 +21 +-2.89329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10642 +20 +-2.89329 +11 +6.10627 +21 +-2.8928 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10627 +20 +-2.8928 +11 +6.10619 +21 +-2.89268 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10619 +20 +-2.89268 +11 +6.10432 +21 +-2.88518 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10432 +20 +-2.88518 +11 +6.10428 +21 +-2.88459 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10428 +20 +-2.88459 +11 +6.10423 +21 +-2.88447 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10423 +20 +-2.88447 +11 +6.10423 +21 +-2.87509 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10423 +20 +-2.87509 +11 +6.10433 +21 +-2.87451 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10433 +20 +-2.87451 +11 +6.10432 +21 +-2.87438 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10432 +20 +-2.87438 +11 +6.10619 +21 +-2.86688 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10619 +20 +-2.86688 +11 +6.1064 +21 +-2.86641 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1064 +20 +-2.86641 +11 +6.10642 +21 +-2.86627 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10642 +20 +-2.86627 +11 +6.10829 +21 +-2.86252 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10829 +20 +-2.86252 +11 +6.10882 +21 +-2.86181 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10882 +20 +-2.86181 +11 +6.10885 +21 +-2.86176 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10885 +20 +-2.86176 +11 +6.11072 +21 +-2.85988 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11072 +20 +-2.85988 +11 +6.11144 +21 +-2.85937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11144 +20 +-2.85937 +11 +6.11149 +21 +-2.85933 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11149 +20 +-2.85933 +11 +6.11524 +21 +-2.85745 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11524 +20 +-2.85745 +11 +6.11622 +21 +-2.85716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11622 +20 +-2.85716 +11 +6.11639 +21 +-2.8572 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11639 +20 +-2.8572 +11 +6.11656 +21 +-2.85714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11656 +20 +-2.85714 +11 +6.12031 +21 +-2.85714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12031 +20 +-2.85714 +11 +6.12132 +21 +-2.85732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11456 +20 +-2.8644 +11 +6.11336 +21 +-2.86559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11336 +20 +-2.86559 +11 +6.11184 +21 +-2.86862 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11184 +20 +-2.86862 +11 +6.11014 +21 +-2.87546 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11014 +20 +-2.87546 +11 +6.11014 +21 +-2.8841 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11014 +20 +-2.8841 +11 +6.11184 +21 +-2.89093 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11184 +20 +-2.89093 +11 +6.11336 +21 +-2.89397 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11336 +20 +-2.89397 +11 +6.11456 +21 +-2.89516 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11456 +20 +-2.89516 +11 +6.11725 +21 +-2.89651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11725 +20 +-2.89651 +11 +6.11961 +21 +-2.89651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11961 +20 +-2.89651 +11 +6.12231 +21 +-2.89516 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12231 +20 +-2.89516 +11 +6.1235 +21 +-2.89397 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1235 +20 +-2.89397 +11 +6.12502 +21 +-2.89093 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12502 +20 +-2.89093 +11 +6.12673 +21 +-2.8841 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12673 +20 +-2.8841 +11 +6.12673 +21 +-2.87546 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12673 +20 +-2.87546 +11 +6.12502 +21 +-2.86862 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12502 +20 +-2.86862 +11 +6.1235 +21 +-2.86559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1235 +20 +-2.86559 +11 +6.12231 +21 +-2.8644 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12231 +20 +-2.8644 +11 +6.11961 +21 +-2.86305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11961 +20 +-2.86305 +11 +6.11726 +21 +-2.86305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11726 +20 +-2.86305 +11 +6.11456 +21 +-2.8644 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08128 +20 +-2.85722 +11 +6.08145 +21 +-2.85719 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08145 +20 +-2.85719 +11 +6.08219 +21 +-2.85761 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08219 +20 +-2.85761 +11 +6.08298 +21 +-2.85796 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08298 +20 +-2.85796 +11 +6.08305 +21 +-2.85811 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08305 +20 +-2.85811 +11 +6.0832 +21 +-2.8582 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0832 +20 +-2.8582 +11 +6.08349 +21 +-2.859 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08349 +20 +-2.859 +11 +6.08387 +21 +-2.85977 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08387 +20 +-2.85977 +11 +6.08383 +21 +-2.85993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08383 +20 +-2.85993 +11 +6.08389 +21 +-2.86009 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08389 +20 +-2.86009 +11 +6.08389 +21 +-2.89651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08389 +20 +-2.89651 +11 +6.09219 +21 +-2.89651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09219 +20 +-2.89651 +11 +6.0932 +21 +-2.89669 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0932 +20 +-2.89669 +11 +6.09474 +21 +-2.89799 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09474 +20 +-2.89799 +11 +6.09509 +21 +-2.89998 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09509 +20 +-2.89998 +11 +6.09408 +21 +-2.90173 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09408 +20 +-2.90173 +11 +6.09219 +21 +-2.90242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09219 +20 +-2.90242 +11 +6.06969 +21 +-2.90242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06969 +20 +-2.90242 +11 +6.06868 +21 +-2.90224 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06868 +20 +-2.90224 +11 +6.06713 +21 +-2.90094 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06713 +20 +-2.90094 +11 +6.06678 +21 +-2.89895 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06678 +20 +-2.89895 +11 +6.06779 +21 +-2.8972 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06779 +20 +-2.8972 +11 +6.06969 +21 +-2.89651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06969 +20 +-2.89651 +11 +6.07798 +21 +-2.89651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07798 +20 +-2.89651 +11 +6.07798 +21 +-2.8691 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07798 +20 +-2.8691 +11 +6.07553 +21 +-2.87156 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07553 +20 +-2.87156 +11 +6.0748 +21 +-2.87206 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0748 +20 +-2.87206 +11 +6.07476 +21 +-2.87211 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07476 +20 +-2.87211 +11 +6.07101 +21 +-2.87398 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07101 +20 +-2.87398 +11 +6.07003 +21 +-2.87428 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07003 +20 +-2.87428 +11 +6.06806 +21 +-2.87381 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06806 +20 +-2.87381 +11 +6.06686 +21 +-2.87218 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06686 +20 +-2.87218 +11 +6.06698 +21 +-2.87017 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06698 +20 +-2.87017 +11 +6.06837 +21 +-2.8687 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06837 +20 +-2.8687 +11 +6.07169 +21 +-2.86704 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07169 +20 +-2.86704 +11 +6.07489 +21 +-2.86384 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07489 +20 +-2.86384 +11 +6.07848 +21 +-2.85846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07848 +20 +-2.85846 +11 +6.07919 +21 +-2.85771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07919 +20 +-2.85771 +11 +6.07935 +21 +-2.85767 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07935 +20 +-2.85767 +11 +6.07946 +21 +-2.85754 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07946 +20 +-2.85754 +11 +6.0803 +21 +-2.85739 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0803 +20 +-2.85739 +11 +6.08113 +21 +-2.85715 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08113 +20 +-2.85715 +11 +6.08128 +21 +-2.85722 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04806 +20 +-2.85729 +11 +6.04813 +21 +-2.85729 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04813 +20 +-2.85729 +11 +6.05375 +21 +-2.85917 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05375 +20 +-2.85917 +11 +6.05465 +21 +-2.85966 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05465 +20 +-2.85966 +11 +6.05474 +21 +-2.85981 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05474 +20 +-2.85981 +11 +6.0549 +21 +-2.85988 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0549 +20 +-2.85988 +11 +6.05678 +21 +-2.86176 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05678 +20 +-2.86176 +11 +6.05737 +21 +-2.8626 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05737 +20 +-2.8626 +11 +6.05754 +21 +-2.86461 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05754 +20 +-2.86461 +11 +6.05638 +21 +-2.86626 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05638 +20 +-2.86626 +11 +6.05443 +21 +-2.86678 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05443 +20 +-2.86678 +11 +6.0526 +21 +-2.86593 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0526 +20 +-2.86593 +11 +6.05122 +21 +-2.86455 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05122 +20 +-2.86455 +11 +6.04671 +21 +-2.86305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04671 +20 +-2.86305 +11 +6.04392 +21 +-2.86305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04392 +20 +-2.86305 +11 +6.03941 +21 +-2.86455 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03941 +20 +-2.86455 +11 +6.03649 +21 +-2.86747 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03649 +20 +-2.86747 +11 +6.03498 +21 +-2.8705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03498 +20 +-2.8705 +11 +6.03327 +21 +-2.87733 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03327 +20 +-2.87733 +11 +6.03327 +21 +-2.88223 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03327 +20 +-2.88223 +11 +6.03498 +21 +-2.88906 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03498 +20 +-2.88906 +11 +6.03649 +21 +-2.89209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03649 +20 +-2.89209 +11 +6.03941 +21 +-2.89501 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03941 +20 +-2.89501 +11 +6.04392 +21 +-2.89651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04392 +20 +-2.89651 +11 +6.04671 +21 +-2.89651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04671 +20 +-2.89651 +11 +6.05122 +21 +-2.89501 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05122 +20 +-2.89501 +11 +6.0526 +21 +-2.89363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0526 +20 +-2.89363 +11 +6.05344 +21 +-2.89304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05344 +20 +-2.89304 +11 +6.05545 +21 +-2.89286 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05545 +20 +-2.89286 +11 +6.05711 +21 +-2.89402 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05711 +20 +-2.89402 +11 +6.05763 +21 +-2.89597 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05763 +20 +-2.89597 +11 +6.05678 +21 +-2.8978 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05678 +20 +-2.8978 +11 +6.0549 +21 +-2.89968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0549 +20 +-2.89968 +11 +6.05406 +21 +-2.90027 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05406 +20 +-2.90027 +11 +6.05389 +21 +-2.90028 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05389 +20 +-2.90028 +11 +6.05375 +21 +-2.90039 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05375 +20 +-2.90039 +11 +6.04813 +21 +-2.90226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04813 +20 +-2.90226 +11 +6.04725 +21 +-2.90239 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04725 +20 +-2.90239 +11 +6.04719 +21 +-2.90242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04719 +20 +-2.90242 +11 +6.04344 +21 +-2.90242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04344 +20 +-2.90242 +11 +6.04257 +21 +-2.90226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04257 +20 +-2.90226 +11 +6.04251 +21 +-2.90226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04251 +20 +-2.90226 +11 +6.03688 +21 +-2.90039 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03688 +20 +-2.90039 +11 +6.03598 +21 +-2.8999 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03598 +20 +-2.8999 +11 +6.03589 +21 +-2.89975 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03589 +20 +-2.89975 +11 +6.03573 +21 +-2.89968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03573 +20 +-2.89968 +11 +6.03198 +21 +-2.89593 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03198 +20 +-2.89593 +11 +6.03147 +21 +-2.8952 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03147 +20 +-2.8952 +11 +6.03143 +21 +-2.89516 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03143 +20 +-2.89516 +11 +6.02955 +21 +-2.89141 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02955 +20 +-2.89141 +11 +6.02941 +21 +-2.89092 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02941 +20 +-2.89092 +11 +6.02933 +21 +-2.89081 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02933 +20 +-2.89081 +11 +6.02745 +21 +-2.88331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02745 +20 +-2.88331 +11 +6.02741 +21 +-2.88272 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02741 +20 +-2.88272 +11 +6.02737 +21 +-2.88259 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02737 +20 +-2.88259 +11 +6.02737 +21 +-2.87697 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02737 +20 +-2.87697 +11 +6.02747 +21 +-2.87639 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02747 +20 +-2.87639 +11 +6.02745 +21 +-2.87625 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02745 +20 +-2.87625 +11 +6.02933 +21 +-2.86875 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02933 +20 +-2.86875 +11 +6.02954 +21 +-2.86829 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02954 +20 +-2.86829 +11 +6.02955 +21 +-2.86815 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02955 +20 +-2.86815 +11 +6.03143 +21 +-2.8644 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03143 +20 +-2.8644 +11 +6.03195 +21 +-2.86369 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03195 +20 +-2.86369 +11 +6.03198 +21 +-2.86363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03198 +20 +-2.86363 +11 +6.03573 +21 +-2.85988 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03573 +20 +-2.85988 +11 +6.03657 +21 +-2.85929 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03657 +20 +-2.85929 +11 +6.03675 +21 +-2.85928 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03675 +20 +-2.85928 +11 +6.03688 +21 +-2.85917 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03688 +20 +-2.85917 +11 +6.04251 +21 +-2.85729 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04251 +20 +-2.85729 +11 +6.04338 +21 +-2.85716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04338 +20 +-2.85716 +11 +6.04344 +21 +-2.85714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04344 +20 +-2.85714 +11 +6.04719 +21 +-2.85714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04719 +20 +-2.85714 +11 +6.04806 +21 +-2.85729 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86376 +20 +-2.89514 +11 +5.86445 +21 +-2.89681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86445 +20 +-2.89681 +11 +5.86376 +21 +-2.89848 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86376 +20 +-2.89848 +11 +5.86209 +21 +-2.89917 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86209 +20 +-2.89917 +11 +5.84421 +21 +-2.89917 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84421 +20 +-2.89917 +11 +5.84254 +21 +-2.89848 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84254 +20 +-2.89848 +11 +5.84185 +21 +-2.89681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84185 +20 +-2.89681 +11 +5.84254 +21 +-2.89514 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84254 +20 +-2.89514 +11 +5.84421 +21 +-2.89445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84421 +20 +-2.89445 +11 +5.86209 +21 +-2.89445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86209 +20 +-2.89445 +11 +5.86376 +21 +-2.89514 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86382 +20 +-2.83732 +11 +5.86409 +21 +-2.83754 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86409 +20 +-2.83754 +11 +5.86443 +21 +-2.83762 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86443 +20 +-2.83762 +11 +5.86484 +21 +-2.83817 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86484 +20 +-2.83817 +11 +5.86537 +21 +-2.83862 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86537 +20 +-2.83862 +11 +5.86543 +21 +-2.83896 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86543 +20 +-2.83896 +11 +5.86564 +21 +-2.83924 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86564 +20 +-2.83924 +11 +5.8656 +21 +-2.83993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8656 +20 +-2.83993 +11 +5.86572 +21 +-2.84061 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86572 +20 +-2.84061 +11 +5.86554 +21 +-2.84091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86554 +20 +-2.84091 +11 +5.86552 +21 +-2.84126 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86552 +20 +-2.84126 +11 +5.84865 +21 +-2.88063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84865 +20 +-2.88063 +11 +5.84809 +21 +-2.88149 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84809 +20 +-2.88149 +11 +5.84629 +21 +-2.8824 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84629 +20 +-2.8824 +11 +5.84432 +21 +-2.88193 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84432 +20 +-2.88193 +11 +5.84311 +21 +-2.88032 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84311 +20 +-2.88032 +11 +5.84322 +21 +-2.8783 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84322 +20 +-2.8783 +11 +5.85833 +21 +-2.84305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85833 +20 +-2.84305 +11 +5.83656 +21 +-2.84305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83656 +20 +-2.84305 +11 +5.83555 +21 +-2.84287 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83555 +20 +-2.84287 +11 +5.834 +21 +-2.84157 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.834 +20 +-2.84157 +11 +5.83365 +21 +-2.83958 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83365 +20 +-2.83958 +11 +5.83466 +21 +-2.83783 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83466 +20 +-2.83783 +11 +5.83656 +21 +-2.83714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83656 +20 +-2.83714 +11 +5.86281 +21 +-2.83714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86281 +20 +-2.83714 +11 +5.86382 +21 +-2.83732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81695 +20 +-2.83732 +11 +5.81708 +21 +-2.83743 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81708 +20 +-2.83743 +11 +5.81726 +21 +-2.83745 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81726 +20 +-2.83745 +11 +5.82101 +21 +-2.83933 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82101 +20 +-2.83933 +11 +5.82172 +21 +-2.83985 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82172 +20 +-2.83985 +11 +5.82178 +21 +-2.83988 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82178 +20 +-2.83988 +11 +5.82365 +21 +-2.84176 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82365 +20 +-2.84176 +11 +5.82416 +21 +-2.84248 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82416 +20 +-2.84248 +11 +5.8242 +21 +-2.84252 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8242 +20 +-2.84252 +11 +5.82608 +21 +-2.84627 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82608 +20 +-2.84627 +11 +5.82637 +21 +-2.84726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82637 +20 +-2.84726 +11 +5.82633 +21 +-2.84743 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82633 +20 +-2.84743 +11 +5.82639 +21 +-2.84759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82639 +20 +-2.84759 +11 +5.82639 +21 +-2.85322 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82639 +20 +-2.85322 +11 +5.82621 +21 +-2.85423 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82621 +20 +-2.85423 +11 +5.8261 +21 +-2.85436 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8261 +20 +-2.85436 +11 +5.82608 +21 +-2.85454 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82608 +20 +-2.85454 +11 +5.8242 +21 +-2.85829 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8242 +20 +-2.85829 +11 +5.82368 +21 +-2.859 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82368 +20 +-2.859 +11 +5.82365 +21 +-2.85905 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82365 +20 +-2.85905 +11 +5.82178 +21 +-2.86093 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82178 +20 +-2.86093 +11 +5.82105 +21 +-2.86144 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82105 +20 +-2.86144 +11 +5.82101 +21 +-2.86148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82101 +20 +-2.86148 +11 +5.81726 +21 +-2.86336 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81726 +20 +-2.86336 +11 +5.81628 +21 +-2.86365 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81628 +20 +-2.86365 +11 +5.81611 +21 +-2.86361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81611 +20 +-2.86361 +11 +5.81598 +21 +-2.86366 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81598 +20 +-2.86366 +11 +5.82586 +21 +-2.87777 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82586 +20 +-2.87777 +11 +5.82629 +21 +-2.8787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82629 +20 +-2.8787 +11 +5.82611 +21 +-2.88071 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82611 +20 +-2.88071 +11 +5.82469 +21 +-2.88214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82469 +20 +-2.88214 +11 +5.82267 +21 +-2.88232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82267 +20 +-2.88232 +11 +5.82102 +21 +-2.88116 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82102 +20 +-2.88116 +11 +5.80878 +21 +-2.86367 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80878 +20 +-2.86367 +11 +5.80389 +21 +-2.86367 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80389 +20 +-2.86367 +11 +5.80389 +21 +-2.87946 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80389 +20 +-2.87946 +11 +5.80372 +21 +-2.88047 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80372 +20 +-2.88047 +11 +5.80242 +21 +-2.88202 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80242 +20 +-2.88202 +11 +5.80043 +21 +-2.88237 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80043 +20 +-2.88237 +11 +5.79868 +21 +-2.88136 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79868 +20 +-2.88136 +11 +5.79799 +21 +-2.87946 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79799 +20 +-2.87946 +11 +5.79799 +21 +-2.84009 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79799 +20 +-2.84009 +11 +5.79806 +21 +-2.83971 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79806 +20 +-2.83971 +11 +5.79803 +21 +-2.83958 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79803 +20 +-2.83958 +11 +5.7981 +21 +-2.83947 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7981 +20 +-2.83947 +11 +5.79817 +21 +-2.83908 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79817 +20 +-2.83908 +11 +5.79866 +21 +-2.8385 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79866 +20 +-2.8385 +11 +5.79904 +21 +-2.83783 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79904 +20 +-2.83783 +11 +5.79929 +21 +-2.83774 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79929 +20 +-2.83774 +11 +5.79946 +21 +-2.83754 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79946 +20 +-2.83754 +11 +5.80022 +21 +-2.8374 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80022 +20 +-2.8374 +11 +5.80094 +21 +-2.83714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80094 +20 +-2.83714 +11 +5.81594 +21 +-2.83714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81594 +20 +-2.83714 +11 +5.81695 +21 +-2.83732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80389 +20 +-2.85776 +11 +5.81524 +21 +-2.85776 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81524 +20 +-2.85776 +11 +5.81794 +21 +-2.85641 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81794 +20 +-2.85641 +11 +5.81914 +21 +-2.85522 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81914 +20 +-2.85522 +11 +5.82049 +21 +-2.85252 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82049 +20 +-2.85252 +11 +5.82049 +21 +-2.84829 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82049 +20 +-2.84829 +11 +5.81914 +21 +-2.84559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81914 +20 +-2.84559 +11 +5.81794 +21 +-2.8444 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81794 +20 +-2.8444 +11 +5.81524 +21 +-2.84305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81524 +20 +-2.84305 +11 +5.80389 +21 +-2.84305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80389 +20 +-2.84305 +11 +5.80389 +21 +-2.85776 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65628 +20 +-2.77296 +11 +6.65645 +21 +-2.77293 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65645 +20 +-2.77293 +11 +6.65719 +21 +-2.77336 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65719 +20 +-2.77336 +11 +6.65798 +21 +-2.77371 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65798 +20 +-2.77371 +11 +6.65805 +21 +-2.77386 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65805 +20 +-2.77386 +11 +6.6582 +21 +-2.77394 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6582 +20 +-2.77394 +11 +6.65849 +21 +-2.77475 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65849 +20 +-2.77475 +11 +6.65887 +21 +-2.77552 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65887 +20 +-2.77552 +11 +6.65883 +21 +-2.77568 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65883 +20 +-2.77568 +11 +6.65889 +21 +-2.77584 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65889 +20 +-2.77584 +11 +6.65889 +21 +-2.81226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65889 +20 +-2.81226 +11 +6.66719 +21 +-2.81226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66719 +20 +-2.81226 +11 +6.6682 +21 +-2.81244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6682 +20 +-2.81244 +11 +6.66974 +21 +-2.81374 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66974 +20 +-2.81374 +11 +6.67009 +21 +-2.81572 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67009 +20 +-2.81572 +11 +6.66908 +21 +-2.81747 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66908 +20 +-2.81747 +11 +6.66719 +21 +-2.81816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66719 +20 +-2.81816 +11 +6.64469 +21 +-2.81816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64469 +20 +-2.81816 +11 +6.64368 +21 +-2.81799 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64368 +20 +-2.81799 +11 +6.64213 +21 +-2.81669 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64213 +20 +-2.81669 +11 +6.64178 +21 +-2.8147 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64178 +20 +-2.8147 +11 +6.64279 +21 +-2.81295 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64279 +20 +-2.81295 +11 +6.64469 +21 +-2.81226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64469 +20 +-2.81226 +11 +6.65298 +21 +-2.81226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65298 +20 +-2.81226 +11 +6.65298 +21 +-2.78485 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65298 +20 +-2.78485 +11 +6.65053 +21 +-2.7873 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65053 +20 +-2.7873 +11 +6.6498 +21 +-2.78781 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6498 +20 +-2.78781 +11 +6.64976 +21 +-2.78786 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64976 +20 +-2.78786 +11 +6.64601 +21 +-2.78973 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64601 +20 +-2.78973 +11 +6.64503 +21 +-2.79002 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64503 +20 +-2.79002 +11 +6.64306 +21 +-2.78955 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64306 +20 +-2.78955 +11 +6.64186 +21 +-2.78793 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64186 +20 +-2.78793 +11 +6.64198 +21 +-2.78592 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64198 +20 +-2.78592 +11 +6.64337 +21 +-2.78445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64337 +20 +-2.78445 +11 +6.64669 +21 +-2.78279 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64669 +20 +-2.78279 +11 +6.64989 +21 +-2.77958 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64989 +20 +-2.77958 +11 +6.65348 +21 +-2.7742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65348 +20 +-2.7742 +11 +6.65419 +21 +-2.77346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65419 +20 +-2.77346 +11 +6.65435 +21 +-2.77341 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65435 +20 +-2.77341 +11 +6.65446 +21 +-2.77328 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65446 +20 +-2.77328 +11 +6.6553 +21 +-2.77314 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6553 +20 +-2.77314 +11 +6.65613 +21 +-2.7729 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65613 +20 +-2.7729 +11 +6.65628 +21 +-2.77296 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62306 +20 +-2.77304 +11 +6.62313 +21 +-2.77304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62313 +20 +-2.77304 +11 +6.62875 +21 +-2.77492 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62875 +20 +-2.77492 +11 +6.62965 +21 +-2.7754 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62965 +20 +-2.7754 +11 +6.62974 +21 +-2.77555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62974 +20 +-2.77555 +11 +6.6299 +21 +-2.77563 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6299 +20 +-2.77563 +11 +6.63178 +21 +-2.7775 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63178 +20 +-2.7775 +11 +6.63237 +21 +-2.77834 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63237 +20 +-2.77834 +11 +6.63254 +21 +-2.78036 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63254 +20 +-2.78036 +11 +6.63138 +21 +-2.78201 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63138 +20 +-2.78201 +11 +6.62943 +21 +-2.78253 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62943 +20 +-2.78253 +11 +6.6276 +21 +-2.78168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6276 +20 +-2.78168 +11 +6.62622 +21 +-2.7803 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62622 +20 +-2.7803 +11 +6.62171 +21 +-2.77879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62171 +20 +-2.77879 +11 +6.61892 +21 +-2.77879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61892 +20 +-2.77879 +11 +6.61441 +21 +-2.7803 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61441 +20 +-2.7803 +11 +6.61149 +21 +-2.78322 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61149 +20 +-2.78322 +11 +6.60998 +21 +-2.78625 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60998 +20 +-2.78625 +11 +6.60827 +21 +-2.79308 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60827 +20 +-2.79308 +11 +6.60827 +21 +-2.79798 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60827 +20 +-2.79798 +11 +6.60998 +21 +-2.80481 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60998 +20 +-2.80481 +11 +6.61149 +21 +-2.80784 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61149 +20 +-2.80784 +11 +6.61441 +21 +-2.81076 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61441 +20 +-2.81076 +11 +6.61892 +21 +-2.81226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61892 +20 +-2.81226 +11 +6.62171 +21 +-2.81226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62171 +20 +-2.81226 +11 +6.62622 +21 +-2.81076 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62622 +20 +-2.81076 +11 +6.6276 +21 +-2.80937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6276 +20 +-2.80937 +11 +6.62844 +21 +-2.80879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62844 +20 +-2.80879 +11 +6.63045 +21 +-2.80861 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63045 +20 +-2.80861 +11 +6.63211 +21 +-2.80977 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63211 +20 +-2.80977 +11 +6.63263 +21 +-2.81172 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63263 +20 +-2.81172 +11 +6.63178 +21 +-2.81355 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63178 +20 +-2.81355 +11 +6.6299 +21 +-2.81542 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6299 +20 +-2.81542 +11 +6.62906 +21 +-2.81601 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62906 +20 +-2.81601 +11 +6.62889 +21 +-2.81603 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62889 +20 +-2.81603 +11 +6.62875 +21 +-2.81614 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62875 +20 +-2.81614 +11 +6.62313 +21 +-2.81801 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62313 +20 +-2.81801 +11 +6.62225 +21 +-2.81814 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62225 +20 +-2.81814 +11 +6.62219 +21 +-2.81816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62219 +20 +-2.81816 +11 +6.61844 +21 +-2.81816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61844 +20 +-2.81816 +11 +6.61757 +21 +-2.81801 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61757 +20 +-2.81801 +11 +6.61751 +21 +-2.81801 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61751 +20 +-2.81801 +11 +6.61188 +21 +-2.81614 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61188 +20 +-2.81614 +11 +6.61098 +21 +-2.81565 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61098 +20 +-2.81565 +11 +6.61089 +21 +-2.8155 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61089 +20 +-2.8155 +11 +6.61073 +21 +-2.81542 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61073 +20 +-2.81542 +11 +6.60698 +21 +-2.81168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60698 +20 +-2.81168 +11 +6.60647 +21 +-2.81095 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60647 +20 +-2.81095 +11 +6.60643 +21 +-2.81091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60643 +20 +-2.81091 +11 +6.60455 +21 +-2.80716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60455 +20 +-2.80716 +11 +6.60441 +21 +-2.80667 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60441 +20 +-2.80667 +11 +6.60433 +21 +-2.80655 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60433 +20 +-2.80655 +11 +6.60245 +21 +-2.79906 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60245 +20 +-2.79906 +11 +6.60241 +21 +-2.79847 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60241 +20 +-2.79847 +11 +6.60237 +21 +-2.79834 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60237 +20 +-2.79834 +11 +6.60237 +21 +-2.79271 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60237 +20 +-2.79271 +11 +6.60247 +21 +-2.79213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60247 +20 +-2.79213 +11 +6.60245 +21 +-2.792 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60245 +20 +-2.792 +11 +6.60433 +21 +-2.7845 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60433 +20 +-2.7845 +11 +6.60454 +21 +-2.78403 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60454 +20 +-2.78403 +11 +6.60455 +21 +-2.7839 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60455 +20 +-2.7839 +11 +6.60643 +21 +-2.78015 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60643 +20 +-2.78015 +11 +6.60695 +21 +-2.77944 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60695 +20 +-2.77944 +11 +6.60698 +21 +-2.77938 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60698 +20 +-2.77938 +11 +6.61073 +21 +-2.77563 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61073 +20 +-2.77563 +11 +6.61157 +21 +-2.77504 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61157 +20 +-2.77504 +11 +6.61175 +21 +-2.77502 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61175 +20 +-2.77502 +11 +6.61188 +21 +-2.77492 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61188 +20 +-2.77492 +11 +6.61751 +21 +-2.77304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61751 +20 +-2.77304 +11 +6.61838 +21 +-2.77291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61838 +20 +-2.77291 +11 +6.61844 +21 +-2.77289 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61844 +20 +-2.77289 +11 +6.62219 +21 +-2.77289 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62219 +20 +-2.77289 +11 +6.62306 +21 +-2.77304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.69296 +20 +-2.77137 +11 +6.6943 +21 +-2.77288 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6943 +20 +-2.77288 +11 +6.69436 +21 +-2.7749 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.69436 +20 +-2.7749 +11 +6.68628 +21 +-2.79914 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68628 +20 +-2.79914 +11 +6.69798 +21 +-2.79914 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.69798 +20 +-2.79914 +11 +6.69798 +21 +-2.78897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.69798 +20 +-2.78897 +11 +6.69816 +21 +-2.78796 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.69816 +20 +-2.78796 +11 +6.69946 +21 +-2.78641 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.69946 +20 +-2.78641 +11 +6.70144 +21 +-2.78606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.70144 +20 +-2.78606 +11 +6.70319 +21 +-2.78707 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.70319 +20 +-2.78707 +11 +6.70388 +21 +-2.78897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.70388 +20 +-2.78897 +11 +6.70388 +21 +-2.79914 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.70388 +20 +-2.79914 +11 +6.70656 +21 +-2.79914 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.70656 +20 +-2.79914 +11 +6.70757 +21 +-2.79931 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.70757 +20 +-2.79931 +11 +6.70911 +21 +-2.80061 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.70911 +20 +-2.80061 +11 +6.70946 +21 +-2.8026 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.70946 +20 +-2.8026 +11 +6.70845 +21 +-2.80435 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.70845 +20 +-2.80435 +11 +6.70656 +21 +-2.80504 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.70656 +20 +-2.80504 +11 +6.70388 +21 +-2.80504 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.70388 +20 +-2.80504 +11 +6.70388 +21 +-2.81521 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.70388 +20 +-2.81521 +11 +6.70371 +21 +-2.81622 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.70371 +20 +-2.81622 +11 +6.70241 +21 +-2.81777 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.70241 +20 +-2.81777 +11 +6.70042 +21 +-2.81812 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.70042 +20 +-2.81812 +11 +6.69867 +21 +-2.81711 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.69867 +20 +-2.81711 +11 +6.69798 +21 +-2.81521 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.69798 +20 +-2.81521 +11 +6.69798 +21 +-2.80504 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.69798 +20 +-2.80504 +11 +6.68218 +21 +-2.80504 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68218 +20 +-2.80504 +11 +6.68117 +21 +-2.80486 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68117 +20 +-2.80486 +11 +6.681 +21 +-2.80472 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.681 +20 +-2.80472 +11 +6.68078 +21 +-2.80469 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68078 +20 +-2.80469 +11 +6.68024 +21 +-2.80408 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68024 +20 +-2.80408 +11 +6.67963 +21 +-2.80356 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67963 +20 +-2.80356 +11 +6.67959 +21 +-2.80334 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67959 +20 +-2.80334 +11 +6.67944 +21 +-2.80317 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67944 +20 +-2.80317 +11 +6.67942 +21 +-2.80237 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67942 +20 +-2.80237 +11 +6.67928 +21 +-2.80158 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67928 +20 +-2.80158 +11 +6.67939 +21 +-2.80138 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67939 +20 +-2.80138 +11 +6.67938 +21 +-2.80115 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67938 +20 +-2.80115 +11 +6.68876 +21 +-2.77303 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68876 +20 +-2.77303 +11 +6.68924 +21 +-2.77213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68924 +20 +-2.77213 +11 +6.69097 +21 +-2.77107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.69097 +20 +-2.77107 +11 +6.69296 +21 +-2.77137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86378 +20 +-2.76722 +11 +5.86395 +21 +-2.76719 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86395 +20 +-2.76719 +11 +5.86469 +21 +-2.76761 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86469 +20 +-2.76761 +11 +5.86547 +21 +-2.76796 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86547 +20 +-2.76796 +11 +5.86555 +21 +-2.76811 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86555 +20 +-2.76811 +11 +5.86569 +21 +-2.7682 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86569 +20 +-2.7682 +11 +5.86599 +21 +-2.769 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86599 +20 +-2.769 +11 +5.86637 +21 +-2.76977 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86637 +20 +-2.76977 +11 +5.86633 +21 +-2.76993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86633 +20 +-2.76993 +11 +5.86639 +21 +-2.77009 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86639 +20 +-2.77009 +11 +5.86639 +21 +-2.80651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86639 +20 +-2.80651 +11 +5.87468 +21 +-2.80651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87468 +20 +-2.80651 +11 +5.87569 +21 +-2.80669 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87569 +20 +-2.80669 +11 +5.87724 +21 +-2.80799 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87724 +20 +-2.80799 +11 +5.87759 +21 +-2.80998 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87759 +20 +-2.80998 +11 +5.87658 +21 +-2.81173 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87658 +20 +-2.81173 +11 +5.87468 +21 +-2.81242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87468 +20 +-2.81242 +11 +5.85218 +21 +-2.81242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85218 +20 +-2.81242 +11 +5.85117 +21 +-2.81224 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85117 +20 +-2.81224 +11 +5.84963 +21 +-2.81094 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84963 +20 +-2.81094 +11 +5.84928 +21 +-2.80895 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84928 +20 +-2.80895 +11 +5.85029 +21 +-2.8072 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85029 +20 +-2.8072 +11 +5.85218 +21 +-2.80651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85218 +20 +-2.80651 +11 +5.86048 +21 +-2.80651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86048 +20 +-2.80651 +11 +5.86048 +21 +-2.7791 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86048 +20 +-2.7791 +11 +5.85802 +21 +-2.78156 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85802 +20 +-2.78156 +11 +5.8573 +21 +-2.78206 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8573 +20 +-2.78206 +11 +5.85725 +21 +-2.78211 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85725 +20 +-2.78211 +11 +5.8535 +21 +-2.78398 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8535 +20 +-2.78398 +11 +5.85252 +21 +-2.78428 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85252 +20 +-2.78428 +11 +5.85056 +21 +-2.78381 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85056 +20 +-2.78381 +11 +5.84935 +21 +-2.78218 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84935 +20 +-2.78218 +11 +5.84947 +21 +-2.78017 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84947 +20 +-2.78017 +11 +5.85086 +21 +-2.7787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85086 +20 +-2.7787 +11 +5.85418 +21 +-2.77704 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85418 +20 +-2.77704 +11 +5.85739 +21 +-2.77384 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85739 +20 +-2.77384 +11 +5.86098 +21 +-2.76846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86098 +20 +-2.76846 +11 +5.86168 +21 +-2.76771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86168 +20 +-2.76771 +11 +5.86185 +21 +-2.76767 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86185 +20 +-2.76767 +11 +5.86196 +21 +-2.76754 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86196 +20 +-2.76754 +11 +5.8628 +21 +-2.76739 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8628 +20 +-2.76739 +11 +5.86362 +21 +-2.76715 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86362 +20 +-2.76715 +11 +5.86378 +21 +-2.76722 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82628 +20 +-2.76722 +11 +5.82645 +21 +-2.76719 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82645 +20 +-2.76719 +11 +5.82719 +21 +-2.76761 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82719 +20 +-2.76761 +11 +5.82798 +21 +-2.76796 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82798 +20 +-2.76796 +11 +5.82805 +21 +-2.76811 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82805 +20 +-2.76811 +11 +5.8282 +21 +-2.7682 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8282 +20 +-2.7682 +11 +5.82849 +21 +-2.769 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82849 +20 +-2.769 +11 +5.82887 +21 +-2.76977 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82887 +20 +-2.76977 +11 +5.82883 +21 +-2.76993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82883 +20 +-2.76993 +11 +5.82889 +21 +-2.77009 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82889 +20 +-2.77009 +11 +5.82889 +21 +-2.80651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82889 +20 +-2.80651 +11 +5.83719 +21 +-2.80651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83719 +20 +-2.80651 +11 +5.8382 +21 +-2.80669 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8382 +20 +-2.80669 +11 +5.83974 +21 +-2.80799 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83974 +20 +-2.80799 +11 +5.84009 +21 +-2.80998 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84009 +20 +-2.80998 +11 +5.83908 +21 +-2.81173 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83908 +20 +-2.81173 +11 +5.83719 +21 +-2.81242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83719 +20 +-2.81242 +11 +5.81469 +21 +-2.81242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81469 +20 +-2.81242 +11 +5.81368 +21 +-2.81224 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81368 +20 +-2.81224 +11 +5.81213 +21 +-2.81094 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81213 +20 +-2.81094 +11 +5.81178 +21 +-2.80895 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81178 +20 +-2.80895 +11 +5.81279 +21 +-2.8072 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81279 +20 +-2.8072 +11 +5.81469 +21 +-2.80651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81469 +20 +-2.80651 +11 +5.82298 +21 +-2.80651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82298 +20 +-2.80651 +11 +5.82298 +21 +-2.7791 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82298 +20 +-2.7791 +11 +5.82053 +21 +-2.78156 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82053 +20 +-2.78156 +11 +5.8198 +21 +-2.78206 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8198 +20 +-2.78206 +11 +5.81976 +21 +-2.78211 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81976 +20 +-2.78211 +11 +5.81601 +21 +-2.78398 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81601 +20 +-2.78398 +11 +5.81503 +21 +-2.78428 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81503 +20 +-2.78428 +11 +5.81306 +21 +-2.78381 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81306 +20 +-2.78381 +11 +5.81186 +21 +-2.78218 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81186 +20 +-2.78218 +11 +5.81198 +21 +-2.78017 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81198 +20 +-2.78017 +11 +5.81337 +21 +-2.7787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81337 +20 +-2.7787 +11 +5.81669 +21 +-2.77704 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81669 +20 +-2.77704 +11 +5.81989 +21 +-2.77384 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81989 +20 +-2.77384 +11 +5.82348 +21 +-2.76846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82348 +20 +-2.76846 +11 +5.82419 +21 +-2.76771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82419 +20 +-2.76771 +11 +5.82435 +21 +-2.76767 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82435 +20 +-2.76767 +11 +5.82446 +21 +-2.76754 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82446 +20 +-2.76754 +11 +5.8253 +21 +-2.76739 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8253 +20 +-2.76739 +11 +5.82613 +21 +-2.76715 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82613 +20 +-2.76715 +11 +5.82628 +21 +-2.76722 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7932 +20 +-2.76732 +11 +5.79334 +21 +-2.76743 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79334 +20 +-2.76743 +11 +5.79351 +21 +-2.76745 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79351 +20 +-2.76745 +11 +5.79726 +21 +-2.76933 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79726 +20 +-2.76933 +11 +5.79797 +21 +-2.76985 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79797 +20 +-2.76985 +11 +5.79803 +21 +-2.76988 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79803 +20 +-2.76988 +11 +5.7999 +21 +-2.77176 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7999 +20 +-2.77176 +11 +5.80041 +21 +-2.77248 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80041 +20 +-2.77248 +11 +5.80046 +21 +-2.77252 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80046 +20 +-2.77252 +11 +5.80233 +21 +-2.77627 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80233 +20 +-2.77627 +11 +5.80262 +21 +-2.77726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80262 +20 +-2.77726 +11 +5.80258 +21 +-2.77743 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80258 +20 +-2.77743 +11 +5.80264 +21 +-2.77759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80264 +20 +-2.77759 +11 +5.80264 +21 +-2.78322 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80264 +20 +-2.78322 +11 +5.80247 +21 +-2.78423 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80247 +20 +-2.78423 +11 +5.80235 +21 +-2.78436 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80235 +20 +-2.78436 +11 +5.80233 +21 +-2.78454 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80233 +20 +-2.78454 +11 +5.80046 +21 +-2.78829 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80046 +20 +-2.78829 +11 +5.79993 +21 +-2.789 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79993 +20 +-2.789 +11 +5.7999 +21 +-2.78905 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7999 +20 +-2.78905 +11 +5.79803 +21 +-2.79093 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79803 +20 +-2.79093 +11 +5.79731 +21 +-2.79144 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79731 +20 +-2.79144 +11 +5.79726 +21 +-2.79148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79726 +20 +-2.79148 +11 +5.79351 +21 +-2.79336 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79351 +20 +-2.79336 +11 +5.79253 +21 +-2.79365 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79253 +20 +-2.79365 +11 +5.79236 +21 +-2.79361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79236 +20 +-2.79361 +11 +5.79223 +21 +-2.79366 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79223 +20 +-2.79366 +11 +5.80211 +21 +-2.80777 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80211 +20 +-2.80777 +11 +5.80254 +21 +-2.8087 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80254 +20 +-2.8087 +11 +5.80237 +21 +-2.81071 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80237 +20 +-2.81071 +11 +5.80094 +21 +-2.81214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80094 +20 +-2.81214 +11 +5.79893 +21 +-2.81232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79893 +20 +-2.81232 +11 +5.79727 +21 +-2.81116 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79727 +20 +-2.81116 +11 +5.78503 +21 +-2.79367 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78503 +20 +-2.79367 +11 +5.78015 +21 +-2.79367 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78015 +20 +-2.79367 +11 +5.78015 +21 +-2.80946 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78015 +20 +-2.80946 +11 +5.77997 +21 +-2.81047 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77997 +20 +-2.81047 +11 +5.77867 +21 +-2.81202 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77867 +20 +-2.81202 +11 +5.77668 +21 +-2.81237 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77668 +20 +-2.81237 +11 +5.77493 +21 +-2.81136 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77493 +20 +-2.81136 +11 +5.77424 +21 +-2.80946 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77424 +20 +-2.80946 +11 +5.77424 +21 +-2.77009 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77424 +20 +-2.77009 +11 +5.77431 +21 +-2.76971 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77431 +20 +-2.76971 +11 +5.77429 +21 +-2.76958 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77429 +20 +-2.76958 +11 +5.77435 +21 +-2.76947 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77435 +20 +-2.76947 +11 +5.77442 +21 +-2.76908 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77442 +20 +-2.76908 +11 +5.77491 +21 +-2.7685 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77491 +20 +-2.7685 +11 +5.7753 +21 +-2.76783 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7753 +20 +-2.76783 +11 +5.77555 +21 +-2.76774 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77555 +20 +-2.76774 +11 +5.77572 +21 +-2.76754 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77572 +20 +-2.76754 +11 +5.77647 +21 +-2.7674 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77647 +20 +-2.7674 +11 +5.77719 +21 +-2.76714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77719 +20 +-2.76714 +11 +5.79219 +21 +-2.76714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79219 +20 +-2.76714 +11 +5.7932 +21 +-2.76732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78015 +20 +-2.78776 +11 +5.79149 +21 +-2.78776 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79149 +20 +-2.78776 +11 +5.79419 +21 +-2.78641 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79419 +20 +-2.78641 +11 +5.79539 +21 +-2.78522 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79539 +20 +-2.78522 +11 +5.79674 +21 +-2.78252 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79674 +20 +-2.78252 +11 +5.79674 +21 +-2.77829 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79674 +20 +-2.77829 +11 +5.79539 +21 +-2.77559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79539 +20 +-2.77559 +11 +5.79419 +21 +-2.7744 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79419 +20 +-2.7744 +11 +5.79149 +21 +-2.77305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79149 +20 +-2.77305 +11 +5.78015 +21 +-2.77305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78015 +20 +-2.77305 +11 +5.78015 +21 +-2.78776 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58768 +20 +-2.78119 +11 +6.58837 +21 +-2.78286 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58837 +20 +-2.78286 +11 +6.58837 +21 +-2.80344 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58837 +20 +-2.80344 +11 +6.58768 +21 +-2.80511 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58768 +20 +-2.80511 +11 +6.58601 +21 +-2.8058 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58601 +20 +-2.8058 +11 +6.58434 +21 +-2.80511 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58434 +20 +-2.80511 +11 +6.58365 +21 +-2.80344 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58365 +20 +-2.80344 +11 +6.58365 +21 +-2.78286 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58365 +20 +-2.78286 +11 +6.58434 +21 +-2.78119 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58434 +20 +-2.78119 +11 +6.58601 +21 +-2.7805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58601 +20 +-2.7805 +11 +6.58768 +21 +-2.78119 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52981 +20 +-2.78119 +11 +6.5305 +21 +-2.78286 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5305 +20 +-2.78286 +11 +6.5305 +21 +-2.80344 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5305 +20 +-2.80344 +11 +6.52981 +21 +-2.80511 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52981 +20 +-2.80511 +11 +6.52814 +21 +-2.8058 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52814 +20 +-2.8058 +11 +6.52647 +21 +-2.80511 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52647 +20 +-2.80511 +11 +6.52578 +21 +-2.80344 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52578 +20 +-2.80344 +11 +6.52578 +21 +-2.78286 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52578 +20 +-2.78286 +11 +6.52647 +21 +-2.78119 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52647 +20 +-2.78119 +11 +6.52814 +21 +-2.7805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52814 +20 +-2.7805 +11 +6.52981 +21 +-2.78119 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14668 +20 +-2.77819 +11 +6.14737 +21 +-2.77986 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14737 +20 +-2.77986 +11 +6.14737 +21 +-2.80044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14737 +20 +-2.80044 +11 +6.14668 +21 +-2.80211 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14668 +20 +-2.80211 +11 +6.14501 +21 +-2.8028 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14501 +20 +-2.8028 +11 +6.14334 +21 +-2.80211 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14334 +20 +-2.80211 +11 +6.14265 +21 +-2.80044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14265 +20 +-2.80044 +11 +6.14265 +21 +-2.77986 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14265 +20 +-2.77986 +11 +6.14334 +21 +-2.77819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14334 +20 +-2.77819 +11 +6.14501 +21 +-2.7775 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14501 +20 +-2.7775 +11 +6.14668 +21 +-2.77819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08881 +20 +-2.77819 +11 +6.0895 +21 +-2.77986 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0895 +20 +-2.77986 +11 +6.0895 +21 +-2.80044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0895 +20 +-2.80044 +11 +6.08881 +21 +-2.80211 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08881 +20 +-2.80211 +11 +6.08714 +21 +-2.8028 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08714 +20 +-2.8028 +11 +6.08547 +21 +-2.80211 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08547 +20 +-2.80211 +11 +6.08478 +21 +-2.80044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08478 +20 +-2.80044 +11 +6.08478 +21 +-2.77986 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08478 +20 +-2.77986 +11 +6.08547 +21 +-2.77819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08547 +20 +-2.77819 +11 +6.08714 +21 +-2.7775 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08714 +20 +-2.7775 +11 +6.08881 +21 +-2.77819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89561 +20 +-2.75801 +11 +5.8963 +21 +-2.75969 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8963 +20 +-2.75969 +11 +5.89561 +21 +-2.76136 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89561 +20 +-2.76136 +11 +5.89394 +21 +-2.76205 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89394 +20 +-2.76205 +11 +5.87606 +21 +-2.76205 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87606 +20 +-2.76205 +11 +5.87439 +21 +-2.76136 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87439 +20 +-2.76136 +11 +5.8737 +21 +-2.75969 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8737 +20 +-2.75969 +11 +5.87439 +21 +-2.75801 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87439 +20 +-2.75801 +11 +5.87606 +21 +-2.75732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87606 +20 +-2.75732 +11 +5.89394 +21 +-2.75732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89394 +20 +-2.75732 +11 +5.89561 +21 +-2.75801 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89561 +20 +-2.70014 +11 +5.8963 +21 +-2.70181 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8963 +20 +-2.70181 +11 +5.89561 +21 +-2.70348 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89561 +20 +-2.70348 +11 +5.89394 +21 +-2.70417 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89394 +20 +-2.70417 +11 +5.87606 +21 +-2.70417 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87606 +20 +-2.70417 +11 +5.87439 +21 +-2.70348 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87439 +20 +-2.70348 +11 +5.8737 +21 +-2.70181 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8737 +20 +-2.70181 +11 +5.87439 +21 +-2.70014 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87439 +20 +-2.70014 +11 +5.87606 +21 +-2.69945 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87606 +20 +-2.69945 +11 +5.89394 +21 +-2.69945 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89394 +20 +-2.69945 +11 +5.89561 +21 +-2.70014 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60846 +20 +-2.55925 +11 +6.61013 +21 +-2.55994 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61013 +20 +-2.55994 +11 +6.61083 +21 +-2.56161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61083 +20 +-2.56161 +11 +6.61083 +21 +-2.68996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61083 +20 +-2.68996 +11 +6.61013 +21 +-2.69163 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61013 +20 +-2.69163 +11 +6.60846 +21 +-2.69232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60846 +20 +-2.69232 +11 +6.60679 +21 +-2.69163 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60679 +20 +-2.69163 +11 +6.6061 +21 +-2.68996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6061 +20 +-2.68996 +11 +6.6061 +21 +-2.56398 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6061 +20 +-2.56398 +11 +6.5439 +21 +-2.56398 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5439 +20 +-2.56398 +11 +6.5439 +21 +-2.68996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5439 +20 +-2.68996 +11 +6.54321 +21 +-2.69163 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54321 +20 +-2.69163 +11 +6.54154 +21 +-2.69232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54154 +20 +-2.69232 +11 +6.53987 +21 +-2.69163 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53987 +20 +-2.69163 +11 +6.53917 +21 +-2.68996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53917 +20 +-2.68996 +11 +6.53917 +21 +-2.56161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53917 +20 +-2.56161 +11 +6.53987 +21 +-2.55994 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53987 +20 +-2.55994 +11 +6.54154 +21 +-2.55925 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54154 +20 +-2.55925 +11 +6.60846 +21 +-2.55925 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44696 +20 +-2.68301 +11 +6.44765 +21 +-2.68469 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44765 +20 +-2.68469 +11 +6.44696 +21 +-2.68636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44696 +20 +-2.68636 +11 +6.44529 +21 +-2.68705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44529 +20 +-2.68705 +11 +6.42471 +21 +-2.68705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42471 +20 +-2.68705 +11 +6.42304 +21 +-2.68636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42304 +20 +-2.68636 +11 +6.42235 +21 +-2.68469 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42235 +20 +-2.68469 +11 +6.42304 +21 +-2.68301 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42304 +20 +-2.68301 +11 +6.42471 +21 +-2.68232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42471 +20 +-2.68232 +11 +6.44529 +21 +-2.68232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44529 +20 +-2.68232 +11 +6.44696 +21 +-2.68301 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23694 +20 +-2.63732 +11 +6.23849 +21 +-2.63862 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23849 +20 +-2.63862 +11 +6.23884 +21 +-2.64061 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23884 +20 +-2.64061 +11 +6.23783 +21 +-2.64236 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23783 +20 +-2.64236 +11 +6.23593 +21 +-2.64305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23593 +20 +-2.64305 +11 +6.22913 +21 +-2.64305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22913 +20 +-2.64305 +11 +6.22643 +21 +-2.6444 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22643 +20 +-2.6444 +11 +6.2251 +21 +-2.64572 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2251 +20 +-2.64572 +11 +6.2218 +21 +-2.65068 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2218 +20 +-2.65068 +11 +6.22107 +21 +-2.6536 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22107 +20 +-2.6536 +11 +6.22336 +21 +-2.65245 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22336 +20 +-2.65245 +11 +6.22435 +21 +-2.65216 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22435 +20 +-2.65216 +11 +6.22452 +21 +-2.6522 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22452 +20 +-2.6522 +11 +6.22468 +21 +-2.65214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22468 +20 +-2.65214 +11 +6.23218 +21 +-2.65214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23218 +20 +-2.65214 +11 +6.23319 +21 +-2.65232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23319 +20 +-2.65232 +11 +6.23333 +21 +-2.65243 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23333 +20 +-2.65243 +11 +6.2335 +21 +-2.65245 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2335 +20 +-2.65245 +11 +6.23725 +21 +-2.65433 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23725 +20 +-2.65433 +11 +6.23796 +21 +-2.65485 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23796 +20 +-2.65485 +11 +6.23802 +21 +-2.65488 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23802 +20 +-2.65488 +11 +6.23989 +21 +-2.65675 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23989 +20 +-2.65675 +11 +6.2404 +21 +-2.65748 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2404 +20 +-2.65748 +11 +6.24045 +21 +-2.65752 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24045 +20 +-2.65752 +11 +6.24232 +21 +-2.66127 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24232 +20 +-2.66127 +11 +6.24261 +21 +-2.66225 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24261 +20 +-2.66225 +11 +6.24257 +21 +-2.66242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24257 +20 +-2.66242 +11 +6.24263 +21 +-2.66259 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24263 +20 +-2.66259 +11 +6.24263 +21 +-2.67196 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24263 +20 +-2.67196 +11 +6.24246 +21 +-2.67297 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24246 +20 +-2.67297 +11 +6.24234 +21 +-2.67311 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24234 +20 +-2.67311 +11 +6.24232 +21 +-2.67329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24232 +20 +-2.67329 +11 +6.24045 +21 +-2.67703 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24045 +20 +-2.67703 +11 +6.23992 +21 +-2.67774 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23992 +20 +-2.67774 +11 +6.23989 +21 +-2.6778 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23989 +20 +-2.6778 +11 +6.23802 +21 +-2.67968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23802 +20 +-2.67968 +11 +6.2373 +21 +-2.68018 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2373 +20 +-2.68018 +11 +6.23725 +21 +-2.68023 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23725 +20 +-2.68023 +11 +6.2335 +21 +-2.6821 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2335 +20 +-2.6821 +11 +6.23252 +21 +-2.6824 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23252 +20 +-2.6824 +11 +6.23235 +21 +-2.68236 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23235 +20 +-2.68236 +11 +6.23218 +21 +-2.68242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23218 +20 +-2.68242 +11 +6.22468 +21 +-2.68242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22468 +20 +-2.68242 +11 +6.22367 +21 +-2.68224 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22367 +20 +-2.68224 +11 +6.22354 +21 +-2.68212 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22354 +20 +-2.68212 +11 +6.22336 +21 +-2.6821 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22336 +20 +-2.6821 +11 +6.21961 +21 +-2.68023 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21961 +20 +-2.68023 +11 +6.2189 +21 +-2.6797 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2189 +20 +-2.6797 +11 +6.21885 +21 +-2.67968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21885 +20 +-2.67968 +11 +6.21697 +21 +-2.6778 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21697 +20 +-2.6778 +11 +6.21646 +21 +-2.67708 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21646 +20 +-2.67708 +11 +6.21642 +21 +-2.67703 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21642 +20 +-2.67703 +11 +6.21454 +21 +-2.67329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21454 +20 +-2.67329 +11 +6.21425 +21 +-2.6723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21425 +20 +-2.6723 +11 +6.21429 +21 +-2.67213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21429 +20 +-2.67213 +11 +6.21423 +21 +-2.67196 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21423 +20 +-2.67196 +11 +6.21423 +21 +-2.65697 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21423 +20 +-2.65697 +11 +6.21433 +21 +-2.65639 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21433 +20 +-2.65639 +11 +6.21432 +21 +-2.65625 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21432 +20 +-2.65625 +11 +6.21619 +21 +-2.64875 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.21619 +20 +-2.64875 +11 +6.2166 +21 +-2.64785 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2166 +20 +-2.64785 +11 +6.2166 +21 +-2.64783 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2166 +20 +-2.64783 +11 +6.22035 +21 +-2.64221 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22035 +20 +-2.64221 +11 +6.22066 +21 +-2.64188 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22066 +20 +-2.64188 +11 +6.22072 +21 +-2.64176 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22072 +20 +-2.64176 +11 +6.2226 +21 +-2.63988 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2226 +20 +-2.63988 +11 +6.22332 +21 +-2.63937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22332 +20 +-2.63937 +11 +6.22336 +21 +-2.63933 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22336 +20 +-2.63933 +11 +6.22711 +21 +-2.63745 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22711 +20 +-2.63745 +11 +6.2281 +21 +-2.63716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2281 +20 +-2.63716 +11 +6.22827 +21 +-2.6372 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22827 +20 +-2.6372 +11 +6.22843 +21 +-2.63714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22843 +20 +-2.63714 +11 +6.23593 +21 +-2.63714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23593 +20 +-2.63714 +11 +6.23694 +21 +-2.63732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22268 +20 +-2.65939 +11 +6.22149 +21 +-2.66059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22149 +20 +-2.66059 +11 +6.22014 +21 +-2.66329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22014 +20 +-2.66329 +11 +6.22014 +21 +-2.67127 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22014 +20 +-2.67127 +11 +6.22149 +21 +-2.67397 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22149 +20 +-2.67397 +11 +6.22268 +21 +-2.67516 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22268 +20 +-2.67516 +11 +6.22538 +21 +-2.67651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22538 +20 +-2.67651 +11 +6.23149 +21 +-2.67651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23149 +20 +-2.67651 +11 +6.23418 +21 +-2.67516 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23418 +20 +-2.67516 +11 +6.23538 +21 +-2.67397 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23538 +20 +-2.67397 +11 +6.23673 +21 +-2.67127 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23673 +20 +-2.67127 +11 +6.23673 +21 +-2.66329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23673 +20 +-2.66329 +11 +6.23538 +21 +-2.66059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23538 +20 +-2.66059 +11 +6.23418 +21 +-2.65939 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23418 +20 +-2.65939 +11 +6.23149 +21 +-2.65804 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23149 +20 +-2.65804 +11 +6.22538 +21 +-2.65804 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22538 +20 +-2.65804 +11 +6.22268 +21 +-2.65939 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19128 +20 +-2.63722 +11 +6.19145 +21 +-2.63719 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19145 +20 +-2.63719 +11 +6.19219 +21 +-2.63761 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19219 +20 +-2.63761 +11 +6.19298 +21 +-2.63796 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19298 +20 +-2.63796 +11 +6.19305 +21 +-2.63811 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19305 +20 +-2.63811 +11 +6.1932 +21 +-2.6382 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1932 +20 +-2.6382 +11 +6.19349 +21 +-2.639 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19349 +20 +-2.639 +11 +6.19387 +21 +-2.63977 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19387 +20 +-2.63977 +11 +6.19383 +21 +-2.63993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19383 +20 +-2.63993 +11 +6.19389 +21 +-2.64009 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19389 +20 +-2.64009 +11 +6.19389 +21 +-2.67651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19389 +20 +-2.67651 +11 +6.20219 +21 +-2.67651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20219 +20 +-2.67651 +11 +6.2032 +21 +-2.67669 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2032 +20 +-2.67669 +11 +6.20474 +21 +-2.67799 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20474 +20 +-2.67799 +11 +6.20509 +21 +-2.67998 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20509 +20 +-2.67998 +11 +6.20408 +21 +-2.68173 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20408 +20 +-2.68173 +11 +6.20219 +21 +-2.68242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.20219 +20 +-2.68242 +11 +6.17969 +21 +-2.68242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17969 +20 +-2.68242 +11 +6.17868 +21 +-2.68224 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17868 +20 +-2.68224 +11 +6.17713 +21 +-2.68094 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17713 +20 +-2.68094 +11 +6.17678 +21 +-2.67895 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17678 +20 +-2.67895 +11 +6.17779 +21 +-2.6772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17779 +20 +-2.6772 +11 +6.17969 +21 +-2.67651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17969 +20 +-2.67651 +11 +6.18798 +21 +-2.67651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18798 +20 +-2.67651 +11 +6.18798 +21 +-2.6491 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18798 +20 +-2.6491 +11 +6.18553 +21 +-2.65156 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18553 +20 +-2.65156 +11 +6.1848 +21 +-2.65206 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1848 +20 +-2.65206 +11 +6.18476 +21 +-2.65211 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18476 +20 +-2.65211 +11 +6.18101 +21 +-2.65398 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18101 +20 +-2.65398 +11 +6.18003 +21 +-2.65428 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18003 +20 +-2.65428 +11 +6.17806 +21 +-2.65381 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17806 +20 +-2.65381 +11 +6.17686 +21 +-2.65218 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17686 +20 +-2.65218 +11 +6.17698 +21 +-2.65017 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17698 +20 +-2.65017 +11 +6.17837 +21 +-2.6487 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17837 +20 +-2.6487 +11 +6.18169 +21 +-2.64704 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18169 +20 +-2.64704 +11 +6.18489 +21 +-2.64384 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18489 +20 +-2.64384 +11 +6.18848 +21 +-2.63846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18848 +20 +-2.63846 +11 +6.18919 +21 +-2.63771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18919 +20 +-2.63771 +11 +6.18935 +21 +-2.63767 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18935 +20 +-2.63767 +11 +6.18946 +21 +-2.63754 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.18946 +20 +-2.63754 +11 +6.1903 +21 +-2.63739 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1903 +20 +-2.63739 +11 +6.19113 +21 +-2.63715 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.19113 +20 +-2.63715 +11 +6.19128 +21 +-2.63722 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15806 +20 +-2.63729 +11 +6.15813 +21 +-2.63729 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15813 +20 +-2.63729 +11 +6.16375 +21 +-2.63917 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16375 +20 +-2.63917 +11 +6.16465 +21 +-2.63966 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16465 +20 +-2.63966 +11 +6.16474 +21 +-2.63981 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16474 +20 +-2.63981 +11 +6.1649 +21 +-2.63988 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1649 +20 +-2.63988 +11 +6.16678 +21 +-2.64176 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16678 +20 +-2.64176 +11 +6.16737 +21 +-2.6426 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16737 +20 +-2.6426 +11 +6.16754 +21 +-2.64461 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16754 +20 +-2.64461 +11 +6.16638 +21 +-2.64626 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16638 +20 +-2.64626 +11 +6.16443 +21 +-2.64678 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16443 +20 +-2.64678 +11 +6.1626 +21 +-2.64593 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1626 +20 +-2.64593 +11 +6.16122 +21 +-2.64455 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16122 +20 +-2.64455 +11 +6.15671 +21 +-2.64305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15671 +20 +-2.64305 +11 +6.15392 +21 +-2.64305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15392 +20 +-2.64305 +11 +6.14941 +21 +-2.64455 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14941 +20 +-2.64455 +11 +6.14649 +21 +-2.64747 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14649 +20 +-2.64747 +11 +6.14498 +21 +-2.6505 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14498 +20 +-2.6505 +11 +6.14327 +21 +-2.65733 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14327 +20 +-2.65733 +11 +6.14327 +21 +-2.66223 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14327 +20 +-2.66223 +11 +6.14498 +21 +-2.66906 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14498 +20 +-2.66906 +11 +6.14649 +21 +-2.67209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14649 +20 +-2.67209 +11 +6.14941 +21 +-2.67501 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14941 +20 +-2.67501 +11 +6.15392 +21 +-2.67651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15392 +20 +-2.67651 +11 +6.15671 +21 +-2.67651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15671 +20 +-2.67651 +11 +6.16122 +21 +-2.67501 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16122 +20 +-2.67501 +11 +6.1626 +21 +-2.67363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1626 +20 +-2.67363 +11 +6.16344 +21 +-2.67304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16344 +20 +-2.67304 +11 +6.16545 +21 +-2.67286 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16545 +20 +-2.67286 +11 +6.16711 +21 +-2.67402 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16711 +20 +-2.67402 +11 +6.16763 +21 +-2.67597 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16763 +20 +-2.67597 +11 +6.16678 +21 +-2.6778 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16678 +20 +-2.6778 +11 +6.1649 +21 +-2.67968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1649 +20 +-2.67968 +11 +6.16406 +21 +-2.68027 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16406 +20 +-2.68027 +11 +6.16389 +21 +-2.68028 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16389 +20 +-2.68028 +11 +6.16375 +21 +-2.68039 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16375 +20 +-2.68039 +11 +6.15813 +21 +-2.68227 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15813 +20 +-2.68227 +11 +6.15725 +21 +-2.68239 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15725 +20 +-2.68239 +11 +6.15719 +21 +-2.68242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15719 +20 +-2.68242 +11 +6.15344 +21 +-2.68242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15344 +20 +-2.68242 +11 +6.15257 +21 +-2.68226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15257 +20 +-2.68226 +11 +6.15251 +21 +-2.68227 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15251 +20 +-2.68227 +11 +6.14688 +21 +-2.68039 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14688 +20 +-2.68039 +11 +6.14598 +21 +-2.6799 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14598 +20 +-2.6799 +11 +6.14589 +21 +-2.67975 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14589 +20 +-2.67975 +11 +6.14573 +21 +-2.67968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14573 +20 +-2.67968 +11 +6.14198 +21 +-2.67593 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14198 +20 +-2.67593 +11 +6.14147 +21 +-2.6752 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14147 +20 +-2.6752 +11 +6.14143 +21 +-2.67516 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14143 +20 +-2.67516 +11 +6.13955 +21 +-2.67141 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13955 +20 +-2.67141 +11 +6.13941 +21 +-2.67092 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13941 +20 +-2.67092 +11 +6.13933 +21 +-2.67081 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13933 +20 +-2.67081 +11 +6.13745 +21 +-2.66331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13745 +20 +-2.66331 +11 +6.13741 +21 +-2.66272 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13741 +20 +-2.66272 +11 +6.13737 +21 +-2.66259 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13737 +20 +-2.66259 +11 +6.13737 +21 +-2.65697 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13737 +20 +-2.65697 +11 +6.13747 +21 +-2.65639 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13747 +20 +-2.65639 +11 +6.13745 +21 +-2.65625 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13745 +20 +-2.65625 +11 +6.13933 +21 +-2.64875 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13933 +20 +-2.64875 +11 +6.13954 +21 +-2.64829 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13954 +20 +-2.64829 +11 +6.13955 +21 +-2.64815 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13955 +20 +-2.64815 +11 +6.14143 +21 +-2.6444 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14143 +20 +-2.6444 +11 +6.14195 +21 +-2.64369 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14195 +20 +-2.64369 +11 +6.14198 +21 +-2.64363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14198 +20 +-2.64363 +11 +6.14573 +21 +-2.63988 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14573 +20 +-2.63988 +11 +6.14657 +21 +-2.63929 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14657 +20 +-2.63929 +11 +6.14675 +21 +-2.63928 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14675 +20 +-2.63928 +11 +6.14688 +21 +-2.63917 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14688 +20 +-2.63917 +11 +6.15251 +21 +-2.63729 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15251 +20 +-2.63729 +11 +6.15338 +21 +-2.63716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15338 +20 +-2.63716 +11 +6.15344 +21 +-2.63714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15344 +20 +-2.63714 +11 +6.15719 +21 +-2.63714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15719 +20 +-2.63714 +11 +6.15806 +21 +-2.63729 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51491 +20 +-2.60439 +11 +5.51597 +21 +-2.60734 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51597 +20 +-2.60734 +11 +5.51597 +21 +-2.61759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51597 +20 +-2.61759 +11 +5.49228 +21 +-2.61759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49228 +20 +-2.61759 +11 +5.49228 +21 +-2.60884 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49228 +20 +-2.60884 +11 +5.49291 +21 +-2.60575 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49291 +20 +-2.60575 +11 +5.49509 +21 +-2.60472 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49509 +20 +-2.60472 +11 +5.49734 +21 +-2.60491 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49734 +20 +-2.60491 +11 +5.49866 +21 +-2.60791 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49866 +20 +-2.60791 +11 +5.49953 +21 +-2.61175 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49953 +20 +-2.61175 +11 +5.50312 +21 +-2.61291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50312 +20 +-2.61291 +11 +5.50672 +21 +-2.61178 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50672 +20 +-2.61178 +11 +5.50759 +21 +-2.60841 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50759 +20 +-2.60841 +11 +5.50809 +21 +-2.60491 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50809 +20 +-2.60491 +11 +5.50934 +21 +-2.60375 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50934 +20 +-2.60375 +11 +5.51172 +21 +-2.60341 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51172 +20 +-2.60341 +11 +5.51491 +21 +-2.60439 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51434 +20 +-2.56887 +11 +5.51603 +21 +-2.57272 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51603 +20 +-2.57272 +11 +5.51438 +21 +-2.57666 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51438 +20 +-2.57666 +11 +5.51066 +21 +-2.57828 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51066 +20 +-2.57828 +11 +5.50684 +21 +-2.57675 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50684 +20 +-2.57675 +11 +5.50509 +21 +-2.57275 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50509 +20 +-2.57275 +11 +5.50684 +21 +-2.56881 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50684 +20 +-2.56881 +11 +5.51063 +21 +-2.56734 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51063 +20 +-2.56734 +11 +5.51434 +21 +-2.56887 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51397 +20 +-2.46519 +11 +5.51559 +21 +-2.46906 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51559 +20 +-2.46906 +11 +5.51394 +21 +-2.47281 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51394 +20 +-2.47281 +11 +5.51028 +21 +-2.47428 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51028 +20 +-2.47428 +11 +5.50659 +21 +-2.47284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50659 +20 +-2.47284 +11 +5.50491 +21 +-2.469 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50491 +20 +-2.469 +11 +5.50656 +21 +-2.46509 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50656 +20 +-2.46509 +11 +5.51028 +21 +-2.46359 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51028 +20 +-2.46359 +11 +5.51397 +21 +-2.46519 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51434 +20 +-2.409 +11 +5.51603 +21 +-2.41284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51603 +20 +-2.41284 +11 +5.51438 +21 +-2.41678 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51438 +20 +-2.41678 +11 +5.51066 +21 +-2.41841 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51066 +20 +-2.41841 +11 +5.50684 +21 +-2.41688 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50684 +20 +-2.41688 +11 +5.50509 +21 +-2.41288 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50509 +20 +-2.41288 +11 +5.50684 +21 +-2.40894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50684 +20 +-2.40894 +11 +5.51063 +21 +-2.40747 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51063 +20 +-2.40747 +11 +5.51434 +21 +-2.409 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50853 +20 +-2.34453 +11 +5.50853 +21 +-2.35241 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50853 +20 +-2.35241 +11 +5.505 +21 +-2.35041 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.505 +20 +-2.35041 +11 +5.50334 +21 +-2.34638 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50334 +20 +-2.34638 +11 +5.50422 +21 +-2.34325 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50422 +20 +-2.34325 +11 +5.50653 +21 +-2.34216 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50653 +20 +-2.34216 +11 +5.50853 +21 +-2.34453 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01844 +20 +-2.10678 +11 +6.01991 +21 +-2.11056 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01991 +20 +-2.11056 +11 +6.01837 +21 +-2.11428 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01837 +20 +-2.11428 +11 +6.01453 +21 +-2.11597 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01453 +20 +-2.11597 +11 +6.01059 +21 +-2.11431 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01059 +20 +-2.11431 +11 +6.00897 +21 +-2.11059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00897 +20 +-2.11059 +11 +6.0105 +21 +-2.10678 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0105 +20 +-2.10678 +11 +6.0145 +21 +-2.10503 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0145 +20 +-2.10503 +11 +6.01844 +21 +-2.10678 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87844 +20 +-2.10678 +11 +5.87991 +21 +-2.11056 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87991 +20 +-2.11056 +11 +5.87838 +21 +-2.11428 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87838 +20 +-2.11428 +11 +5.87453 +21 +-2.11597 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87453 +20 +-2.11597 +11 +5.87059 +21 +-2.11431 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87059 +20 +-2.11431 +11 +5.86897 +21 +-2.11059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86897 +20 +-2.11059 +11 +5.8705 +21 +-2.10678 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8705 +20 +-2.10678 +11 +5.8745 +21 +-2.10503 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8745 +20 +-2.10503 +11 +5.87844 +21 +-2.10678 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82054 +20 +-2.09313 +11 +5.82437 +21 +-2.09569 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82437 +20 +-2.09569 +11 +5.82702 +21 +-2.09951 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82702 +20 +-2.09951 +11 +5.82791 +21 +-2.10416 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82791 +20 +-2.10416 +11 +5.827 +21 +-2.10879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.827 +20 +-2.10879 +11 +5.82428 +21 +-2.11256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82428 +20 +-2.11256 +11 +5.82044 +21 +-2.11507 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82044 +20 +-2.11507 +11 +5.81616 +21 +-2.11591 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81616 +20 +-2.11591 +11 +5.81009 +21 +-2.11591 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81009 +20 +-2.11591 +11 +5.81009 +21 +-2.09228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81009 +20 +-2.09228 +11 +5.81609 +21 +-2.09228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81609 +20 +-2.09228 +11 +5.82054 +21 +-2.09313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91634 +20 +-2.1065 +11 +5.91784 +21 +-2.11022 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91784 +20 +-2.11022 +11 +5.91625 +21 +-2.11391 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91625 +20 +-2.11391 +11 +5.91237 +21 +-2.11553 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91237 +20 +-2.11553 +11 +5.90862 +21 +-2.11388 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90862 +20 +-2.11388 +11 +5.90716 +21 +-2.11022 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90716 +20 +-2.11022 +11 +5.90859 +21 +-2.10653 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90859 +20 +-2.10653 +11 +5.91244 +21 +-2.10484 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91244 +20 +-2.10484 +11 +5.91634 +21 +-2.1065 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05528 +20 +-2.10644 +11 +6.05672 +21 +-2.11013 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05672 +20 +-2.11013 +11 +6.05522 +21 +-2.11375 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05522 +20 +-2.11375 +11 +6.05144 +21 +-2.11541 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05144 +20 +-2.11541 +11 +6.04756 +21 +-2.11378 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04756 +20 +-2.11378 +11 +6.04597 +21 +-2.11013 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04597 +20 +-2.11013 +11 +6.04747 +21 +-2.10641 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04747 +20 +-2.10641 +11 +6.05141 +21 +-2.10472 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05141 +20 +-2.10472 +11 +6.05528 +21 +-2.10644 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05153 +20 +-2.1543 +11 +6.02631 +21 +-2.1543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02631 +20 +-2.1543 +11 +5.97584 +21 +-2.1543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97584 +20 +-2.1543 +11 +5.95991 +21 +-2.1543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95991 +20 +-2.1543 +11 +5.9577 +21 +-2.1543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9577 +20 +-2.1543 +11 +5.95795 +21 +-2.155 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95795 +20 +-2.155 +11 +5.95795 +21 +-2.17464 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95795 +20 +-2.17464 +11 +6 +21 +-2.17464 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6 +20 +-2.17464 +11 +6.00167 +21 +-2.17533 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00167 +20 +-2.17533 +11 +6.00236 +21 +-2.177 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00236 +20 +-2.177 +11 +6.00236 +21 +-2.264 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00236 +20 +-2.264 +11 +6.00167 +21 +-2.26567 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00167 +20 +-2.26567 +11 +6 +21 +-2.26636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6 +20 +-2.26636 +11 +5.52 +21 +-2.26636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52 +20 +-2.26636 +11 +5.51833 +21 +-2.26567 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51833 +20 +-2.26567 +11 +5.51764 +21 +-2.264 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51764 +20 +-2.264 +11 +5.51764 +21 +-2.22295 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51764 +20 +-2.22295 +11 +5.50795 +21 +-2.22295 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50795 +20 +-2.22295 +11 +5.50795 +21 +-2.28187 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50795 +20 +-2.28187 +11 +5.51 +21 +-2.28177 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51 +20 +-2.28177 +11 +5.51435 +21 +-2.28198 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51435 +20 +-2.28198 +11 +5.51866 +21 +-2.28262 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51866 +20 +-2.28262 +11 +5.52288 +21 +-2.28368 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52288 +20 +-2.28368 +11 +5.52698 +21 +-2.28515 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52698 +20 +-2.28515 +11 +5.53091 +21 +-2.28701 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53091 +20 +-2.28701 +11 +5.53465 +21 +-2.28925 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53465 +20 +-2.28925 +11 +5.53814 +21 +-2.29184 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53814 +20 +-2.29184 +11 +5.54137 +21 +-2.29476 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54137 +20 +-2.29476 +11 +5.54429 +21 +-2.29799 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54429 +20 +-2.29799 +11 +5.54689 +21 +-2.30149 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54689 +20 +-2.30149 +11 +5.54913 +21 +-2.30522 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54913 +20 +-2.30522 +11 +5.55099 +21 +-2.30916 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55099 +20 +-2.30916 +11 +5.55245 +21 +-2.31326 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55245 +20 +-2.31326 +11 +5.55351 +21 +-2.31748 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55351 +20 +-2.31748 +11 +5.55415 +21 +-2.32179 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55415 +20 +-2.32179 +11 +5.55436 +21 +-2.32614 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55436 +20 +-2.32614 +11 +5.55436 +21 +-2.33134 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55436 +20 +-2.33134 +11 +5.55436 +21 +-2.34628 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55436 +20 +-2.34628 +11 +5.55436 +21 +-2.37372 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55436 +20 +-2.37372 +11 +5.55436 +21 +-2.40106 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55436 +20 +-2.40106 +11 +5.55436 +21 +-2.43584 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55436 +20 +-2.43584 +11 +5.55436 +21 +-2.47984 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55436 +20 +-2.47984 +11 +5.55436 +21 +-2.49434 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55436 +20 +-2.49434 +11 +5.55436 +21 +-2.53497 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55436 +20 +-2.53497 +11 +5.55436 +21 +-2.56094 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55436 +20 +-2.56094 +11 +5.55436 +21 +-2.60672 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55436 +20 +-2.60672 +11 +5.55436 +21 +-2.62866 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55436 +20 +-2.62866 +11 +5.55436 +21 +-2.63386 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55436 +20 +-2.63386 +11 +5.55415 +21 +-2.63821 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55415 +20 +-2.63821 +11 +5.55351 +21 +-2.64252 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55351 +20 +-2.64252 +11 +5.55245 +21 +-2.64674 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55245 +20 +-2.64674 +11 +5.55099 +21 +-2.65084 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.55099 +20 +-2.65084 +11 +5.54913 +21 +-2.65478 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54913 +20 +-2.65478 +11 +5.54689 +21 +-2.65851 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54689 +20 +-2.65851 +11 +5.54429 +21 +-2.66201 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54429 +20 +-2.66201 +11 +5.54137 +21 +-2.66524 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54137 +20 +-2.66524 +11 +5.53814 +21 +-2.66816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53814 +20 +-2.66816 +11 +5.53465 +21 +-2.67075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53465 +20 +-2.67075 +11 +5.53091 +21 +-2.67299 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53091 +20 +-2.67299 +11 +5.52698 +21 +-2.67485 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52698 +20 +-2.67485 +11 +5.52288 +21 +-2.67632 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52288 +20 +-2.67632 +11 +5.51866 +21 +-2.67738 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51866 +20 +-2.67738 +11 +5.51435 +21 +-2.67802 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51435 +20 +-2.67802 +11 +5.51 +21 +-2.67823 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51 +20 +-2.67823 +11 +5.50565 +21 +-2.67802 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50565 +20 +-2.67802 +11 +5.50134 +21 +-2.67738 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50134 +20 +-2.67738 +11 +5.49712 +21 +-2.67632 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49712 +20 +-2.67632 +11 +5.49302 +21 +-2.67485 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49302 +20 +-2.67485 +11 +5.48909 +21 +-2.67299 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.48909 +20 +-2.67299 +11 +5.48535 +21 +-2.67075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.48535 +20 +-2.67075 +11 +5.48186 +21 +-2.66816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.48186 +20 +-2.66816 +11 +5.47863 +21 +-2.66524 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47863 +20 +-2.66524 +11 +5.47571 +21 +-2.66201 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47571 +20 +-2.66201 +11 +5.47311 +21 +-2.65851 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47311 +20 +-2.65851 +11 +5.47087 +21 +-2.65478 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47087 +20 +-2.65478 +11 +5.46901 +21 +-2.65084 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.46901 +20 +-2.65084 +11 +5.46755 +21 +-2.64674 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.46755 +20 +-2.64674 +11 +5.46649 +21 +-2.64252 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.46649 +20 +-2.64252 +11 +5.46585 +21 +-2.63821 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.46585 +20 +-2.63821 +11 +5.46564 +21 +-2.63386 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.46564 +20 +-2.63386 +11 +5.46564 +21 +-2.62866 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.46564 +20 +-2.62866 +11 +5.46564 +21 +-2.33134 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.46564 +20 +-2.33134 +11 +5.46564 +21 +-2.32614 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.46564 +20 +-2.32614 +11 +5.46585 +21 +-2.32179 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.46585 +20 +-2.32179 +11 +5.46649 +21 +-2.31748 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.46649 +20 +-2.31748 +11 +5.46755 +21 +-2.31326 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.46755 +20 +-2.31326 +11 +5.46901 +21 +-2.30916 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.46901 +20 +-2.30916 +11 +5.47087 +21 +-2.30522 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47087 +20 +-2.30522 +11 +5.47311 +21 +-2.30149 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47311 +20 +-2.30149 +11 +5.47571 +21 +-2.29799 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47571 +20 +-2.29799 +11 +5.47863 +21 +-2.29476 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47863 +20 +-2.29476 +11 +5.48186 +21 +-2.29184 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.48186 +20 +-2.29184 +11 +5.48535 +21 +-2.28925 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.48535 +20 +-2.28925 +11 +5.48909 +21 +-2.28701 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.48909 +20 +-2.28701 +11 +5.49302 +21 +-2.28515 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49302 +20 +-2.28515 +11 +5.49712 +21 +-2.28368 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49712 +20 +-2.28368 +11 +5.50134 +21 +-2.28262 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50134 +20 +-2.28262 +11 +5.50205 +21 +-2.28252 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50205 +20 +-2.28252 +11 +5.50205 +21 +-2.22 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50205 +20 +-2.22 +11 +5.50211 +21 +-2.21962 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50211 +20 +-2.21962 +11 +5.50209 +21 +-2.21949 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50209 +20 +-2.21949 +11 +5.50216 +21 +-2.21937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50216 +20 +-2.21937 +11 +5.50223 +21 +-2.21899 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50223 +20 +-2.21899 +11 +5.50272 +21 +-2.2184 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50272 +20 +-2.2184 +11 +5.5031 +21 +-2.21774 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5031 +20 +-2.21774 +11 +5.50335 +21 +-2.21765 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50335 +20 +-2.21765 +11 +5.50352 +21 +-2.21744 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50352 +20 +-2.21744 +11 +5.50428 +21 +-2.21731 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50428 +20 +-2.21731 +11 +5.505 +21 +-2.21705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.505 +20 +-2.21705 +11 +5.51764 +21 +-2.21705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51764 +20 +-2.21705 +11 +5.51764 +21 +-2.177 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51764 +20 +-2.177 +11 +5.51833 +21 +-2.17533 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51833 +20 +-2.17533 +11 +5.52 +21 +-2.17464 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52 +20 +-2.17464 +11 +5.95205 +21 +-2.17464 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95205 +20 +-2.17464 +11 +5.95205 +21 +-2.155 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95205 +20 +-2.155 +11 +5.95217 +21 +-2.1543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95217 +20 +-2.1543 +11 +5.90159 +21 +-2.1543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90159 +20 +-2.1543 +11 +5.88631 +21 +-2.1543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88631 +20 +-2.1543 +11 +5.84847 +21 +-2.1543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84847 +20 +-2.1543 +11 +5.81597 +21 +-2.1543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81597 +20 +-2.1543 +11 +5.79903 +21 +-2.1543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79903 +20 +-2.1543 +11 +5.79382 +21 +-2.1543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79382 +20 +-2.1543 +11 +5.78948 +21 +-2.15409 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78948 +20 +-2.15409 +11 +5.78518 +21 +-2.15345 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78518 +20 +-2.15345 +11 +5.78096 +21 +-2.15239 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78096 +20 +-2.15239 +11 +5.77687 +21 +-2.15093 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77687 +20 +-2.15093 +11 +5.77294 +21 +-2.14907 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77294 +20 +-2.14907 +11 +5.76921 +21 +-2.14684 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76921 +20 +-2.14684 +11 +5.76572 +21 +-2.14425 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76572 +20 +-2.14425 +11 +5.7625 +21 +-2.14133 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7625 +20 +-2.14133 +11 +5.75958 +21 +-2.1381 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75958 +20 +-2.1381 +11 +5.75699 +21 +-2.13461 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75699 +20 +-2.13461 +11 +5.75475 +21 +-2.13088 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75475 +20 +-2.13088 +11 +5.75289 +21 +-2.12695 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75289 +20 +-2.12695 +11 +5.75143 +21 +-2.12286 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75143 +20 +-2.12286 +11 +5.75037 +21 +-2.11864 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75037 +20 +-2.11864 +11 +5.74973 +21 +-2.11434 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74973 +20 +-2.11434 +11 +5.74952 +21 +-2.11 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74952 +20 +-2.11 +11 +5.74973 +21 +-2.10566 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74973 +20 +-2.10566 +11 +5.75037 +21 +-2.10136 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75037 +20 +-2.10136 +11 +5.75143 +21 +-2.09714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75143 +20 +-2.09714 +11 +5.75289 +21 +-2.09305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75289 +20 +-2.09305 +11 +5.75475 +21 +-2.08912 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75475 +20 +-2.08912 +11 +5.75699 +21 +-2.08539 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75699 +20 +-2.08539 +11 +5.75958 +21 +-2.0819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75958 +20 +-2.0819 +11 +5.7625 +21 +-2.07867 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7625 +20 +-2.07867 +11 +5.76572 +21 +-2.07575 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76572 +20 +-2.07575 +11 +5.76921 +21 +-2.07316 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76921 +20 +-2.07316 +11 +5.77294 +21 +-2.07093 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77294 +20 +-2.07093 +11 +5.77687 +21 +-2.06907 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77687 +20 +-2.06907 +11 +5.78096 +21 +-2.06761 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78096 +20 +-2.06761 +11 +5.78518 +21 +-2.06655 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78518 +20 +-2.06655 +11 +5.78948 +21 +-2.06591 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78948 +20 +-2.06591 +11 +5.79382 +21 +-2.0657 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79382 +20 +-2.0657 +11 +5.79903 +21 +-2.0657 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79903 +20 +-2.0657 +11 +6.12097 +21 +-2.0657 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12097 +20 +-2.0657 +11 +6.12618 +21 +-2.0657 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12618 +20 +-2.0657 +11 +6.13052 +21 +-2.06591 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13052 +20 +-2.06591 +11 +6.13482 +21 +-2.06655 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13482 +20 +-2.06655 +11 +6.13904 +21 +-2.06761 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13904 +20 +-2.06761 +11 +6.14313 +21 +-2.06907 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14313 +20 +-2.06907 +11 +6.14706 +21 +-2.07093 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14706 +20 +-2.07093 +11 +6.15079 +21 +-2.07316 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15079 +20 +-2.07316 +11 +6.15428 +21 +-2.07575 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15428 +20 +-2.07575 +11 +6.1575 +21 +-2.07867 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1575 +20 +-2.07867 +11 +6.16042 +21 +-2.0819 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16042 +20 +-2.0819 +11 +6.16301 +21 +-2.08539 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16301 +20 +-2.08539 +11 +6.16525 +21 +-2.08912 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16525 +20 +-2.08912 +11 +6.16711 +21 +-2.09305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16711 +20 +-2.09305 +11 +6.16857 +21 +-2.09714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16857 +20 +-2.09714 +11 +6.16963 +21 +-2.10136 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16963 +20 +-2.10136 +11 +6.17027 +21 +-2.10566 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17027 +20 +-2.10566 +11 +6.17048 +21 +-2.11 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17048 +20 +-2.11 +11 +6.17027 +21 +-2.11434 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17027 +20 +-2.11434 +11 +6.16963 +21 +-2.11864 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16963 +20 +-2.11864 +11 +6.16857 +21 +-2.12286 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16857 +20 +-2.12286 +11 +6.16711 +21 +-2.12695 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16711 +20 +-2.12695 +11 +6.16525 +21 +-2.13088 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16525 +20 +-2.13088 +11 +6.16301 +21 +-2.13461 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16301 +20 +-2.13461 +11 +6.16042 +21 +-2.1381 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16042 +20 +-2.1381 +11 +6.1575 +21 +-2.14133 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1575 +20 +-2.14133 +11 +6.15428 +21 +-2.14425 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15428 +20 +-2.14425 +11 +6.15079 +21 +-2.14684 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15079 +20 +-2.14684 +11 +6.14706 +21 +-2.14907 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14706 +20 +-2.14907 +11 +6.14313 +21 +-2.15093 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14313 +20 +-2.15093 +11 +6.13904 +21 +-2.15239 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13904 +20 +-2.15239 +11 +6.13482 +21 +-2.15345 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13482 +20 +-2.15345 +11 +6.13052 +21 +-2.15409 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13052 +20 +-2.15409 +11 +6.12618 +21 +-2.1543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12618 +20 +-2.1543 +11 +6.12097 +21 +-2.1543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12097 +20 +-2.1543 +11 +6.11547 +21 +-2.1543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11547 +20 +-2.1543 +11 +6.05153 +21 +-2.1543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52703 +20 +-2.60672 +11 +5.52656 +21 +-2.60296 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52656 +20 +-2.60296 +11 +5.52516 +21 +-2.59959 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52516 +20 +-2.59959 +11 +5.52281 +21 +-2.59662 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52281 +20 +-2.59662 +11 +5.51977 +21 +-2.5943 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51977 +20 +-2.5943 +11 +5.51628 +21 +-2.59287 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51628 +20 +-2.59287 +11 +5.51234 +21 +-2.59234 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51234 +20 +-2.59234 +11 +5.50884 +21 +-2.59275 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50884 +20 +-2.59275 +11 +5.50557 +21 +-2.59398 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50557 +20 +-2.59398 +11 +5.50253 +21 +-2.59603 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50253 +20 +-2.59603 +11 +5.49892 +21 +-2.59425 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49892 +20 +-2.59425 +11 +5.49497 +21 +-2.59366 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49497 +20 +-2.59366 +11 +5.49136 +21 +-2.59411 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49136 +20 +-2.59411 +11 +5.48811 +21 +-2.59546 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.48811 +20 +-2.59546 +11 +5.48522 +21 +-2.59772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.48522 +20 +-2.59772 +11 +5.483 +21 +-2.60051 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.483 +20 +-2.60051 +11 +5.48166 +21 +-2.60372 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.48166 +20 +-2.60372 +11 +5.48122 +21 +-2.60734 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.48122 +20 +-2.60734 +11 +5.48122 +21 +-2.62309 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.48122 +20 +-2.62309 +11 +5.48164 +21 +-2.62631 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.48164 +20 +-2.62631 +11 +5.48291 +21 +-2.62797 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.48291 +20 +-2.62797 +11 +5.48453 +21 +-2.62856 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.48453 +20 +-2.62856 +11 +5.48672 +21 +-2.62866 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.48672 +20 +-2.62866 +11 +5.52141 +21 +-2.62866 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52141 +20 +-2.62866 +11 +5.52466 +21 +-2.62828 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52466 +20 +-2.62828 +11 +5.52644 +21 +-2.62662 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52644 +20 +-2.62662 +11 +5.52703 +21 +-2.62316 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52703 +20 +-2.62316 +11 +5.52703 +21 +-2.60672 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52697 +20 +-2.56094 +11 +5.52656 +21 +-2.55816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52656 +20 +-2.55816 +11 +5.52534 +21 +-2.55666 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52534 +20 +-2.55666 +11 +5.52369 +21 +-2.55612 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52369 +20 +-2.55612 +11 +5.52153 +21 +-2.55603 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52153 +20 +-2.55603 +11 +5.49966 +21 +-2.55603 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49966 +20 +-2.55603 +11 +5.4975 +21 +-2.55612 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4975 +20 +-2.55612 +11 +5.49584 +21 +-2.55669 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49584 +20 +-2.55669 +11 +5.49453 +21 +-2.55834 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49453 +20 +-2.55834 +11 +5.49416 +21 +-2.56197 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49416 +20 +-2.56197 +11 +5.49503 +21 +-2.56548 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49503 +20 +-2.56548 +11 +5.49766 +21 +-2.56691 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49766 +20 +-2.56691 +11 +5.49637 +21 +-2.56803 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49637 +20 +-2.56803 +11 +5.49497 +21 +-2.57047 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49497 +20 +-2.57047 +11 +5.49422 +21 +-2.57434 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49422 +20 +-2.57434 +11 +5.49476 +21 +-2.57795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49476 +20 +-2.57795 +11 +5.4964 +21 +-2.58136 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4964 +20 +-2.58136 +11 +5.49913 +21 +-2.58456 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49913 +20 +-2.58456 +11 +5.50258 +21 +-2.58715 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50258 +20 +-2.58715 +11 +5.50639 +21 +-2.5887 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50639 +20 +-2.5887 +11 +5.51056 +21 +-2.58922 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51056 +20 +-2.58922 +11 +5.51474 +21 +-2.5887 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51474 +20 +-2.5887 +11 +5.51856 +21 +-2.58716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51856 +20 +-2.58716 +11 +5.52203 +21 +-2.58459 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52203 +20 +-2.58459 +11 +5.52477 +21 +-2.58142 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52477 +20 +-2.58142 +11 +5.52642 +21 +-2.57808 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52642 +20 +-2.57808 +11 +5.52697 +21 +-2.57456 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52697 +20 +-2.57456 +11 +5.52614 +21 +-2.56993 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52614 +20 +-2.56993 +11 +5.52366 +21 +-2.56684 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52366 +20 +-2.56684 +11 +5.52612 +21 +-2.5655 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52612 +20 +-2.5655 +11 +5.52697 +21 +-2.56094 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54134 +20 +-2.47984 +11 +5.54097 +21 +-2.47678 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54097 +20 +-2.47678 +11 +5.53969 +21 +-2.47519 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53969 +20 +-2.47519 +11 +5.53809 +21 +-2.47463 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53809 +20 +-2.47463 +11 +5.53597 +21 +-2.47453 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53597 +20 +-2.47453 +11 +5.52334 +21 +-2.47453 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52334 +20 +-2.47453 +11 +5.5255 +21 +-2.47152 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5255 +20 +-2.47152 +11 +5.52622 +21 +-2.46709 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52622 +20 +-2.46709 +11 +5.52568 +21 +-2.46374 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52568 +20 +-2.46374 +11 +5.52408 +21 +-2.46052 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52408 +20 +-2.46052 +11 +5.52141 +21 +-2.45744 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52141 +20 +-2.45744 +11 +5.51802 +21 +-2.45492 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51802 +20 +-2.45492 +11 +5.5143 +21 +-2.45341 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5143 +20 +-2.45341 +11 +5.51022 +21 +-2.45291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51022 +20 +-2.45291 +11 +5.50614 +21 +-2.45341 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50614 +20 +-2.45341 +11 +5.50241 +21 +-2.45493 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50241 +20 +-2.45493 +11 +5.49903 +21 +-2.45747 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49903 +20 +-2.45747 +11 +5.49636 +21 +-2.46057 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49636 +20 +-2.46057 +11 +5.49475 +21 +-2.46379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49475 +20 +-2.46379 +11 +5.49422 +21 +-2.46712 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49422 +20 +-2.46712 +11 +5.49503 +21 +-2.47154 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49503 +20 +-2.47154 +11 +5.49747 +21 +-2.47459 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49747 +20 +-2.47459 +11 +5.495 +21 +-2.47594 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.495 +20 +-2.47594 +11 +5.49416 +21 +-2.48041 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49416 +20 +-2.48041 +11 +5.49458 +21 +-2.48311 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49458 +20 +-2.48311 +11 +5.49584 +21 +-2.48459 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49584 +20 +-2.48459 +11 +5.49741 +21 +-2.48513 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49741 +20 +-2.48513 +11 +5.49953 +21 +-2.48522 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49953 +20 +-2.48522 +11 +5.53603 +21 +-2.48522 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53603 +20 +-2.48522 +11 +5.53816 +21 +-2.48513 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53816 +20 +-2.48513 +11 +5.53972 +21 +-2.48456 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53972 +20 +-2.48456 +11 +5.54097 +21 +-2.48294 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.54097 +20 +-2.48294 +11 +5.54134 +21 +-2.47984 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52697 +20 +-2.40106 +11 +5.52656 +21 +-2.39829 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52656 +20 +-2.39829 +11 +5.52534 +21 +-2.39678 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52534 +20 +-2.39678 +11 +5.52369 +21 +-2.39625 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52369 +20 +-2.39625 +11 +5.52153 +21 +-2.39616 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52153 +20 +-2.39616 +11 +5.49966 +21 +-2.39616 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49966 +20 +-2.39616 +11 +5.4975 +21 +-2.39625 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4975 +20 +-2.39625 +11 +5.49584 +21 +-2.39681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49584 +20 +-2.39681 +11 +5.49453 +21 +-2.39847 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49453 +20 +-2.39847 +11 +5.49416 +21 +-2.40209 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49416 +20 +-2.40209 +11 +5.49503 +21 +-2.40561 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49503 +20 +-2.40561 +11 +5.49766 +21 +-2.40703 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49766 +20 +-2.40703 +11 +5.49637 +21 +-2.40816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49637 +20 +-2.40816 +11 +5.49497 +21 +-2.41059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49497 +20 +-2.41059 +11 +5.49422 +21 +-2.41447 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49422 +20 +-2.41447 +11 +5.49476 +21 +-2.41808 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49476 +20 +-2.41808 +11 +5.4964 +21 +-2.42148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4964 +20 +-2.42148 +11 +5.49913 +21 +-2.42469 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49913 +20 +-2.42469 +11 +5.50258 +21 +-2.42727 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50258 +20 +-2.42727 +11 +5.50639 +21 +-2.42883 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50639 +20 +-2.42883 +11 +5.51056 +21 +-2.42934 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51056 +20 +-2.42934 +11 +5.51474 +21 +-2.42883 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51474 +20 +-2.42883 +11 +5.51856 +21 +-2.42729 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51856 +20 +-2.42729 +11 +5.52203 +21 +-2.42472 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52203 +20 +-2.42472 +11 +5.52477 +21 +-2.42155 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52477 +20 +-2.42155 +11 +5.52642 +21 +-2.4182 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52642 +20 +-2.4182 +11 +5.52697 +21 +-2.41469 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52697 +20 +-2.41469 +11 +5.52614 +21 +-2.41005 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52614 +20 +-2.41005 +11 +5.52366 +21 +-2.40697 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52366 +20 +-2.40697 +11 +5.52612 +21 +-2.40563 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52612 +20 +-2.40563 +11 +5.52697 +21 +-2.40106 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52791 +20 +-2.34628 +11 +5.52756 +21 +-2.34046 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52756 +20 +-2.34046 +11 +5.52652 +21 +-2.3363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52652 +20 +-2.3363 +11 +5.52478 +21 +-2.3338 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52478 +20 +-2.3338 +11 +5.52234 +21 +-2.33297 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52234 +20 +-2.33297 +11 +5.51947 +21 +-2.33378 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51947 +20 +-2.33378 +11 +5.51666 +21 +-2.33722 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51666 +20 +-2.33722 +11 +5.51734 +21 +-2.33972 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51734 +20 +-2.33972 +11 +5.51759 +21 +-2.34041 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51759 +20 +-2.34041 +11 +5.51816 +21 +-2.34286 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51816 +20 +-2.34286 +11 +5.51834 +21 +-2.34609 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51834 +20 +-2.34609 +11 +5.51716 +21 +-2.35022 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51716 +20 +-2.35022 +11 +5.51422 +21 +-2.35228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51422 +20 +-2.35228 +11 +5.51422 +21 +-2.33747 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51422 +20 +-2.33747 +11 +5.51237 +21 +-2.33325 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51237 +20 +-2.33325 +11 +5.51003 +21 +-2.33182 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51003 +20 +-2.33182 +11 +5.50669 +21 +-2.33134 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50669 +20 +-2.33134 +11 +5.50299 +21 +-2.33188 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50299 +20 +-2.33188 +11 +5.49959 +21 +-2.33347 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49959 +20 +-2.33347 +11 +5.49691 +21 +-2.33579 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49691 +20 +-2.33579 +11 +5.495 +21 +-2.33869 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.495 +20 +-2.33869 +11 +5.49385 +21 +-2.34216 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49385 +20 +-2.34216 +11 +5.49347 +21 +-2.34622 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49347 +20 +-2.34622 +11 +5.49399 +21 +-2.35102 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49399 +20 +-2.35102 +11 +5.49557 +21 +-2.35526 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49557 +20 +-2.35526 +11 +5.49819 +21 +-2.35894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49819 +20 +-2.35894 +11 +5.50168 +21 +-2.36177 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50168 +20 +-2.36177 +11 +5.50588 +21 +-2.36347 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50588 +20 +-2.36347 +11 +5.51078 +21 +-2.36403 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51078 +20 +-2.36403 +11 +5.51482 +21 +-2.36359 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51482 +20 +-2.36359 +11 +5.51859 +21 +-2.36228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51859 +20 +-2.36228 +11 +5.52209 +21 +-2.36009 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52209 +20 +-2.36009 +11 +5.52446 +21 +-2.3577 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52446 +20 +-2.3577 +11 +5.52631 +21 +-2.3545 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52631 +20 +-2.3545 +11 +5.52751 +21 +-2.35065 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52751 +20 +-2.35065 +11 +5.52791 +21 +-2.34628 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52236 +20 +-2.17936 +11 +5.52236 +21 +-2.21836 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52236 +20 +-2.21836 +11 +5.52256 +21 +-2.21852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52256 +20 +-2.21852 +11 +5.52291 +21 +-2.22051 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52291 +20 +-2.22051 +11 +5.52236 +21 +-2.22146 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52236 +20 +-2.22146 +11 +5.52236 +21 +-2.26164 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52236 +20 +-2.26164 +11 +5.99764 +21 +-2.26164 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99764 +20 +-2.26164 +11 +5.99764 +21 +-2.17936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99764 +20 +-2.17936 +11 +5.52236 +21 +-2.17936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02631 +20 +-2.12691 +11 +6.02909 +21 +-2.1265 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02909 +20 +-2.1265 +11 +6.03059 +21 +-2.12528 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03059 +20 +-2.12528 +11 +6.03113 +21 +-2.12363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03113 +20 +-2.12363 +11 +6.03122 +21 +-2.12147 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03122 +20 +-2.12147 +11 +6.03122 +21 +-2.09959 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03122 +20 +-2.09959 +11 +6.03113 +21 +-2.09744 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03113 +20 +-2.09744 +11 +6.03056 +21 +-2.09578 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03056 +20 +-2.09578 +11 +6.02891 +21 +-2.09447 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02891 +20 +-2.09447 +11 +6.02528 +21 +-2.09409 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02528 +20 +-2.09409 +11 +6.02177 +21 +-2.09497 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02177 +20 +-2.09497 +11 +6.02034 +21 +-2.09759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02034 +20 +-2.09759 +11 +6.01922 +21 +-2.09631 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01922 +20 +-2.09631 +11 +6.01678 +21 +-2.09491 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01678 +20 +-2.09491 +11 +6.01291 +21 +-2.09416 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01291 +20 +-2.09416 +11 +6.0093 +21 +-2.0947 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0093 +20 +-2.0947 +11 +6.00589 +21 +-2.09634 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00589 +20 +-2.09634 +11 +6.00269 +21 +-2.09906 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00269 +20 +-2.09906 +11 +6.0001 +21 +-2.10251 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0001 +20 +-2.10251 +11 +5.99855 +21 +-2.10633 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99855 +20 +-2.10633 +11 +5.99803 +21 +-2.1105 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99803 +20 +-2.1105 +11 +5.99855 +21 +-2.11468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99855 +20 +-2.11468 +11 +6.00009 +21 +-2.1185 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00009 +20 +-2.1185 +11 +6.00266 +21 +-2.12197 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00266 +20 +-2.12197 +11 +6.00583 +21 +-2.12471 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00583 +20 +-2.12471 +11 +6.00917 +21 +-2.12636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00917 +20 +-2.12636 +11 +6.01269 +21 +-2.12691 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01269 +20 +-2.12691 +11 +6.01732 +21 +-2.12608 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01732 +20 +-2.12608 +11 +6.02041 +21 +-2.12359 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02041 +20 +-2.12359 +11 +6.02175 +21 +-2.12606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02175 +20 +-2.12606 +11 +6.02631 +21 +-2.12691 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88631 +20 +-2.12691 +11 +5.88909 +21 +-2.1265 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88909 +20 +-2.1265 +11 +5.89059 +21 +-2.12528 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89059 +20 +-2.12528 +11 +5.89112 +21 +-2.12363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89112 +20 +-2.12363 +11 +5.89122 +21 +-2.12147 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89122 +20 +-2.12147 +11 +5.89122 +21 +-2.09959 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89122 +20 +-2.09959 +11 +5.89112 +21 +-2.09744 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89112 +20 +-2.09744 +11 +5.89056 +21 +-2.09578 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89056 +20 +-2.09578 +11 +5.88891 +21 +-2.09447 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88891 +20 +-2.09447 +11 +5.88528 +21 +-2.09409 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88528 +20 +-2.09409 +11 +5.88177 +21 +-2.09497 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88177 +20 +-2.09497 +11 +5.88034 +21 +-2.09759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88034 +20 +-2.09759 +11 +5.87922 +21 +-2.09631 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87922 +20 +-2.09631 +11 +5.87678 +21 +-2.09491 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87678 +20 +-2.09491 +11 +5.87291 +21 +-2.09416 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87291 +20 +-2.09416 +11 +5.8693 +21 +-2.0947 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8693 +20 +-2.0947 +11 +5.86589 +21 +-2.09634 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86589 +20 +-2.09634 +11 +5.86269 +21 +-2.09906 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86269 +20 +-2.09906 +11 +5.8601 +21 +-2.10251 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8601 +20 +-2.10251 +11 +5.85855 +21 +-2.10633 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85855 +20 +-2.10633 +11 +5.85803 +21 +-2.1105 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85803 +20 +-2.1105 +11 +5.85855 +21 +-2.11468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85855 +20 +-2.11468 +11 +5.86009 +21 +-2.1185 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86009 +20 +-2.1185 +11 +5.86266 +21 +-2.12197 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86266 +20 +-2.12197 +11 +5.86583 +21 +-2.12471 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86583 +20 +-2.12471 +11 +5.86917 +21 +-2.12636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.86917 +20 +-2.12636 +11 +5.87269 +21 +-2.12691 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87269 +20 +-2.12691 +11 +5.87732 +21 +-2.12608 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.87732 +20 +-2.12608 +11 +5.88041 +21 +-2.12359 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88041 +20 +-2.12359 +11 +5.88175 +21 +-2.12606 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88175 +20 +-2.12606 +11 +5.88631 +21 +-2.12691 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81597 +20 +-2.12697 +11 +5.82057 +21 +-2.12654 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82057 +20 +-2.12654 +11 +5.82482 +21 +-2.12527 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82482 +20 +-2.12527 +11 +5.82871 +21 +-2.12314 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82871 +20 +-2.12314 +11 +5.83225 +21 +-2.12016 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83225 +20 +-2.12016 +11 +5.83519 +21 +-2.11658 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83519 +20 +-2.11658 +11 +5.83729 +21 +-2.11266 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83729 +20 +-2.11266 +11 +5.83855 +21 +-2.10841 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83855 +20 +-2.10841 +11 +5.83897 +21 +-2.10381 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83897 +20 +-2.10381 +11 +5.83854 +21 +-2.09923 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83854 +20 +-2.09923 +11 +5.83725 +21 +-2.09503 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83725 +20 +-2.09503 +11 +5.8351 +21 +-2.0912 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8351 +20 +-2.0912 +11 +5.83209 +21 +-2.08775 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.83209 +20 +-2.08775 +11 +5.82852 +21 +-2.08489 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82852 +20 +-2.08489 +11 +5.82467 +21 +-2.08285 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82467 +20 +-2.08285 +11 +5.82055 +21 +-2.08163 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82055 +20 +-2.08163 +11 +5.81616 +21 +-2.08122 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81616 +20 +-2.08122 +11 +5.80459 +21 +-2.08116 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80459 +20 +-2.08116 +11 +5.80138 +21 +-2.08158 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80138 +20 +-2.08158 +11 +5.79972 +21 +-2.08284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79972 +20 +-2.08284 +11 +5.79913 +21 +-2.08447 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79913 +20 +-2.08447 +11 +5.79903 +21 +-2.08666 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79903 +20 +-2.08666 +11 +5.79903 +21 +-2.12141 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79903 +20 +-2.12141 +11 +5.79978 +21 +-2.12541 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79978 +20 +-2.12541 +11 +5.80144 +21 +-2.12658 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80144 +20 +-2.12658 +11 +5.80453 +21 +-2.12697 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80453 +20 +-2.12697 +11 +5.81597 +21 +-2.12697 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90159 +20 +-2.14128 +11 +5.90466 +21 +-2.14091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90466 +20 +-2.14091 +11 +5.90625 +21 +-2.13963 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90625 +20 +-2.13963 +11 +5.90681 +21 +-2.13803 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90681 +20 +-2.13803 +11 +5.90691 +21 +-2.13591 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90691 +20 +-2.13591 +11 +5.90691 +21 +-2.12328 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90691 +20 +-2.12328 +11 +5.90992 +21 +-2.12544 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90992 +20 +-2.12544 +11 +5.91434 +21 +-2.12616 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91434 +20 +-2.12616 +11 +5.91769 +21 +-2.12562 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91769 +20 +-2.12562 +11 +5.92091 +21 +-2.12402 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92091 +20 +-2.12402 +11 +5.924 +21 +-2.12134 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.924 +20 +-2.12134 +11 +5.92652 +21 +-2.11796 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92652 +20 +-2.11796 +11 +5.92803 +21 +-2.11423 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92803 +20 +-2.11423 +11 +5.92853 +21 +-2.11016 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92853 +20 +-2.11016 +11 +5.92802 +21 +-2.10608 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92802 +20 +-2.10608 +11 +5.9265 +21 +-2.10235 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9265 +20 +-2.10235 +11 +5.92397 +21 +-2.09897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92397 +20 +-2.09897 +11 +5.92087 +21 +-2.0963 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.92087 +20 +-2.0963 +11 +5.91765 +21 +-2.09469 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91765 +20 +-2.09469 +11 +5.91431 +21 +-2.09416 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.91431 +20 +-2.09416 +11 +5.9099 +21 +-2.09497 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9099 +20 +-2.09497 +11 +5.90684 +21 +-2.09741 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90684 +20 +-2.09741 +11 +5.9055 +21 +-2.09494 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9055 +20 +-2.09494 +11 +5.90103 +21 +-2.09409 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90103 +20 +-2.09409 +11 +5.89833 +21 +-2.09452 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89833 +20 +-2.09452 +11 +5.89684 +21 +-2.09578 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89684 +20 +-2.09578 +11 +5.89631 +21 +-2.09734 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89631 +20 +-2.09734 +11 +5.89622 +21 +-2.09947 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89622 +20 +-2.09947 +11 +5.89622 +21 +-2.13597 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89622 +20 +-2.13597 +11 +5.89631 +21 +-2.13809 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89631 +20 +-2.13809 +11 +5.89687 +21 +-2.13966 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.89687 +20 +-2.13966 +11 +5.8985 +21 +-2.14091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8985 +20 +-2.14091 +11 +5.90159 +21 +-2.14128 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05153 +20 +-2.14122 +11 +6.05556 +21 +-2.14073 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05556 +20 +-2.14073 +11 +6.05931 +21 +-2.13926 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05931 +20 +-2.13926 +11 +6.06278 +21 +-2.13681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06278 +20 +-2.13681 +11 +6.06556 +21 +-2.13357 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06556 +20 +-2.13357 +11 +6.06723 +21 +-2.1297 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06723 +20 +-2.1297 +11 +6.06778 +21 +-2.12522 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06778 +20 +-2.12522 +11 +6.06778 +21 +-2.09934 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06778 +20 +-2.09934 +11 +6.06769 +21 +-2.09722 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06769 +20 +-2.09722 +11 +6.06712 +21 +-2.09563 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06712 +20 +-2.09563 +11 +6.06553 +21 +-2.09434 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06553 +20 +-2.09434 +11 +6.06197 +21 +-2.09397 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06197 +20 +-2.09397 +11 +6.05844 +21 +-2.09488 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05844 +20 +-2.09488 +11 +6.05716 +21 +-2.09753 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05716 +20 +-2.09753 +11 +6.05612 +21 +-2.09631 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05612 +20 +-2.09631 +11 +6.05372 +21 +-2.09488 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05372 +20 +-2.09488 +11 +6.04984 +21 +-2.09409 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04984 +20 +-2.09409 +11 +6.04632 +21 +-2.09463 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04632 +20 +-2.09463 +11 +6.04298 +21 +-2.09623 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04298 +20 +-2.09623 +11 +6.03984 +21 +-2.09891 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03984 +20 +-2.09891 +11 +6.03731 +21 +-2.10229 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03731 +20 +-2.10229 +11 +6.03579 +21 +-2.10602 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03579 +20 +-2.10602 +11 +6.03528 +21 +-2.11009 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03528 +20 +-2.11009 +11 +6.03578 +21 +-2.11417 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03578 +20 +-2.11417 +11 +6.0373 +21 +-2.11789 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0373 +20 +-2.11789 +11 +6.03981 +21 +-2.12125 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03981 +20 +-2.12125 +11 +6.04291 +21 +-2.12391 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04291 +20 +-2.12391 +11 +6.04615 +21 +-2.1255 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04615 +20 +-2.1255 +11 +6.04953 +21 +-2.12603 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04953 +20 +-2.12603 +11 +6.05402 +21 +-2.12525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05402 +20 +-2.12525 +11 +6.05709 +21 +-2.12291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05709 +20 +-2.12291 +11 +6.05709 +21 +-2.12478 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05709 +20 +-2.12478 +11 +6.05559 +21 +-2.12928 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05559 +20 +-2.12928 +11 +6.05172 +21 +-2.13116 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05172 +20 +-2.13116 +11 +6.04834 +21 +-2.13058 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04834 +20 +-2.13058 +11 +6.04522 +21 +-2.12884 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04522 +20 +-2.12884 +11 +6.04341 +21 +-2.12809 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04341 +20 +-2.12809 +11 +6.04188 +21 +-2.12859 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04188 +20 +-2.12859 +11 +6.04003 +21 +-2.13041 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04003 +20 +-2.13041 +11 +6.03816 +21 +-2.13472 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03816 +20 +-2.13472 +11 +6.03923 +21 +-2.1367 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03923 +20 +-2.1367 +11 +6.04247 +21 +-2.13891 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04247 +20 +-2.13891 +11 +6.04689 +21 +-2.14064 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04689 +20 +-2.14064 +11 +6.05153 +21 +-2.14122 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52741 +20 +-2.53497 +11 +5.52678 +21 +-2.53019 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52678 +20 +-2.53019 +11 +5.52491 +21 +-2.52622 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52491 +20 +-2.52622 +11 +5.52277 +21 +-2.52364 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52277 +20 +-2.52364 +11 +5.52047 +21 +-2.52278 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52047 +20 +-2.52278 +11 +5.51722 +21 +-2.52422 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51722 +20 +-2.52422 +11 +5.51473 +21 +-2.5267 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51473 +20 +-2.5267 +11 +5.51391 +21 +-2.52878 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51391 +20 +-2.52878 +11 +5.51506 +21 +-2.53156 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51506 +20 +-2.53156 +11 +5.51622 +21 +-2.53525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51622 +20 +-2.53525 +11 +5.51475 +21 +-2.53897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51475 +20 +-2.53897 +11 +5.51063 +21 +-2.54072 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51063 +20 +-2.54072 +11 +5.50647 +21 +-2.53891 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50647 +20 +-2.53891 +11 +5.50497 +21 +-2.535 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50497 +20 +-2.535 +11 +5.50603 +21 +-2.53178 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50603 +20 +-2.53178 +11 +5.50741 +21 +-2.52841 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50741 +20 +-2.52841 +11 +5.50655 +21 +-2.5263 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50655 +20 +-2.5263 +11 +5.50397 +21 +-2.52409 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50397 +20 +-2.52409 +11 +5.50038 +21 +-2.52278 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50038 +20 +-2.52278 +11 +5.49753 +21 +-2.52441 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49753 +20 +-2.52441 +11 +5.49634 +21 +-2.52616 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49634 +20 +-2.52616 +11 +5.49572 +21 +-2.52716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49572 +20 +-2.52716 +11 +5.49444 +21 +-2.53047 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49444 +20 +-2.53047 +11 +5.49378 +21 +-2.53509 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49378 +20 +-2.53509 +11 +5.49424 +21 +-2.53893 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49424 +20 +-2.53893 +11 +5.49561 +21 +-2.54262 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49561 +20 +-2.54262 +11 +5.49791 +21 +-2.54616 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49791 +20 +-2.54616 +11 +5.50023 +21 +-2.54848 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50023 +20 +-2.54848 +11 +5.50319 +21 +-2.55034 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50319 +20 +-2.55034 +11 +5.50666 +21 +-2.55156 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50666 +20 +-2.55156 +11 +5.5105 +21 +-2.55197 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.5105 +20 +-2.55197 +11 +5.51436 +21 +-2.55156 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51436 +20 +-2.55156 +11 +5.51788 +21 +-2.55034 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51788 +20 +-2.55034 +11 +5.52088 +21 +-2.54848 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52088 +20 +-2.54848 +11 +5.52322 +21 +-2.54616 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52322 +20 +-2.54616 +11 +5.52555 +21 +-2.54252 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52555 +20 +-2.54252 +11 +5.52694 +21 +-2.5388 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52694 +20 +-2.5388 +11 +5.52741 +21 +-2.53497 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52747 +20 +-2.49434 +11 +5.52484 +21 +-2.49059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52484 +20 +-2.49059 +11 +5.52078 +21 +-2.48866 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52078 +20 +-2.48866 +11 +5.51947 +21 +-2.48906 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51947 +20 +-2.48906 +11 +5.51747 +21 +-2.49103 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51747 +20 +-2.49103 +11 +5.51059 +21 +-2.49934 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51059 +20 +-2.49934 +11 +5.50534 +21 +-2.49316 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50534 +20 +-2.49316 +11 +5.50197 +21 +-2.49084 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50197 +20 +-2.49084 +11 +5.498 +21 +-2.49287 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.498 +20 +-2.49287 +11 +5.49547 +21 +-2.49647 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49547 +20 +-2.49647 +11 +5.49716 +21 +-2.50022 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49716 +20 +-2.50022 +11 +5.49766 +21 +-2.50097 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49766 +20 +-2.50097 +11 +5.50084 +21 +-2.50438 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50084 +20 +-2.50438 +11 +5.50403 +21 +-2.50778 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50403 +20 +-2.50778 +11 +5.48422 +21 +-2.50778 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.48422 +20 +-2.50778 +11 +5.48247 +21 +-2.50784 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.48247 +20 +-2.50784 +11 +5.47972 +21 +-2.50897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47972 +20 +-2.50897 +11 +5.47866 +21 +-2.51322 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47866 +20 +-2.51322 +11 +5.47908 +21 +-2.51644 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47908 +20 +-2.51644 +11 +5.48034 +21 +-2.51809 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.48034 +20 +-2.51809 +11 +5.482 +21 +-2.51863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.482 +20 +-2.51863 +11 +5.48416 +21 +-2.51872 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.48416 +20 +-2.51872 +11 +5.52159 +21 +-2.51872 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52159 +20 +-2.51872 +11 +5.52375 +21 +-2.51863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52375 +20 +-2.51863 +11 +5.52541 +21 +-2.51809 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52541 +20 +-2.51809 +11 +5.52667 +21 +-2.51645 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52667 +20 +-2.51645 +11 +5.52709 +21 +-2.51328 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52709 +20 +-2.51328 +11 +5.52669 +21 +-2.51008 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52669 +20 +-2.51008 +11 +5.52547 +21 +-2.50847 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52547 +20 +-2.50847 +11 +5.52381 +21 +-2.50787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52381 +20 +-2.50787 +11 +5.52166 +21 +-2.50778 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52166 +20 +-2.50778 +11 +5.51684 +21 +-2.50778 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51684 +20 +-2.50778 +11 +5.51852 +21 +-2.50586 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51852 +20 +-2.50586 +11 +5.52106 +21 +-2.50322 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52106 +20 +-2.50322 +11 +5.52359 +21 +-2.50061 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52359 +20 +-2.50061 +11 +5.52522 +21 +-2.49878 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52522 +20 +-2.49878 +11 +5.52566 +21 +-2.49816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52566 +20 +-2.49816 +11 +5.52747 +21 +-2.49434 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52712 +20 +-2.43584 +11 +5.52647 +21 +-2.43309 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52647 +20 +-2.43309 +11 +5.52483 +21 +-2.43216 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52483 +20 +-2.43216 +11 +5.52166 +21 +-2.43184 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52166 +20 +-2.43184 +11 +5.51722 +21 +-2.43309 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51722 +20 +-2.43309 +11 +5.51669 +21 +-2.43416 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51669 +20 +-2.43416 +11 +5.51659 +21 +-2.43587 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51659 +20 +-2.43587 +11 +5.516 +21 +-2.43753 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.516 +20 +-2.43753 +11 +5.51316 +21 +-2.43791 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51316 +20 +-2.43791 +11 +5.48422 +21 +-2.43791 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.48422 +20 +-2.43791 +11 +5.48203 +21 +-2.438 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.48203 +20 +-2.438 +11 +5.48034 +21 +-2.43859 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.48034 +20 +-2.43859 +11 +5.47908 +21 +-2.44025 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47908 +20 +-2.44025 +11 +5.47866 +21 +-2.44334 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47866 +20 +-2.44334 +11 +5.47908 +21 +-2.44656 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47908 +20 +-2.44656 +11 +5.48034 +21 +-2.44822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.48034 +20 +-2.44822 +11 +5.482 +21 +-2.44875 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.482 +20 +-2.44875 +11 +5.48416 +21 +-2.44884 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.48416 +20 +-2.44884 +11 +5.51391 +21 +-2.44884 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51391 +20 +-2.44884 +11 +5.51969 +21 +-2.44841 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51969 +20 +-2.44841 +11 +5.52366 +21 +-2.44709 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52366 +20 +-2.44709 +11 +5.52573 +21 +-2.44481 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52573 +20 +-2.44481 +11 +5.52684 +21 +-2.44084 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52684 +20 +-2.44084 +11 +5.52712 +21 +-2.43584 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52709 +20 +-2.37372 +11 +5.527 +21 +-2.37162 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.527 +20 +-2.37162 +11 +5.52647 +21 +-2.36997 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52647 +20 +-2.36997 +11 +5.52483 +21 +-2.36866 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52483 +20 +-2.36866 +11 +5.52166 +21 +-2.36822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52166 +20 +-2.36822 +11 +5.51747 +21 +-2.36966 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51747 +20 +-2.36966 +11 +5.51687 +21 +-2.37131 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51687 +20 +-2.37131 +11 +5.51678 +21 +-2.37356 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51678 +20 +-2.37356 +11 +5.51603 +21 +-2.37556 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51603 +20 +-2.37556 +11 +5.51359 +21 +-2.37609 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51359 +20 +-2.37609 +11 +5.50497 +21 +-2.37609 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50497 +20 +-2.37609 +11 +5.50522 +21 +-2.37203 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50522 +20 +-2.37203 +11 +5.50512 +21 +-2.36987 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50512 +20 +-2.36987 +11 +5.50459 +21 +-2.36822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50459 +20 +-2.36822 +11 +5.50295 +21 +-2.36695 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50295 +20 +-2.36695 +11 +5.49978 +21 +-2.36653 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49978 +20 +-2.36653 +11 +5.49658 +21 +-2.36694 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49658 +20 +-2.36694 +11 +5.49497 +21 +-2.36816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49497 +20 +-2.36816 +11 +5.49437 +21 +-2.36981 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49437 +20 +-2.36981 +11 +5.49428 +21 +-2.37194 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49428 +20 +-2.37194 +11 +5.49453 +21 +-2.37609 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49453 +20 +-2.37609 +11 +5.48841 +21 +-2.37609 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.48841 +20 +-2.37609 +11 +5.48522 +21 +-2.37641 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.48522 +20 +-2.37641 +11 +5.48348 +21 +-2.37808 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.48348 +20 +-2.37808 +11 +5.48291 +21 +-2.38147 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.48291 +20 +-2.38147 +11 +5.4833 +21 +-2.38467 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4833 +20 +-2.38467 +11 +5.48447 +21 +-2.38628 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.48447 +20 +-2.38628 +11 +5.48597 +21 +-2.38687 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.48597 +20 +-2.38687 +11 +5.48809 +21 +-2.38697 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.48809 +20 +-2.38697 +11 +5.49453 +21 +-2.38697 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49453 +20 +-2.38697 +11 +5.49428 +21 +-2.38903 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49428 +20 +-2.38903 +11 +5.49509 +21 +-2.39153 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49509 +20 +-2.39153 +11 +5.49675 +21 +-2.39241 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49675 +20 +-2.39241 +11 +5.50047 +21 +-2.39272 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50047 +20 +-2.39272 +11 +5.50409 +21 +-2.39181 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50409 +20 +-2.39181 +11 +5.50516 +21 +-2.38953 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50516 +20 +-2.38953 +11 +5.50497 +21 +-2.38697 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50497 +20 +-2.38697 +11 +5.51422 +21 +-2.38697 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51422 +20 +-2.38697 +11 +5.51843 +21 +-2.38659 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51843 +20 +-2.38659 +11 +5.52175 +21 +-2.38547 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52175 +20 +-2.38547 +11 +5.52416 +21 +-2.38359 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52416 +20 +-2.38359 +11 +5.52579 +21 +-2.381 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52579 +20 +-2.381 +11 +5.52677 +21 +-2.3777 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52677 +20 +-2.3777 +11 +5.52709 +21 +-2.37372 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84531 +20 +-2.09456 +11 +5.84366 +21 +-2.09578 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84366 +20 +-2.09578 +11 +5.84312 +21 +-2.09744 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84312 +20 +-2.09744 +11 +5.84303 +21 +-2.09959 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84303 +20 +-2.09959 +11 +5.84303 +21 +-2.12153 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84303 +20 +-2.12153 +11 +5.84312 +21 +-2.12372 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84312 +20 +-2.12372 +11 +5.84366 +21 +-2.12534 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84366 +20 +-2.12534 +11 +5.8453 +21 +-2.12661 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8453 +20 +-2.12661 +11 +5.84847 +21 +-2.12703 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84847 +20 +-2.12703 +11 +5.85167 +21 +-2.12662 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85167 +20 +-2.12662 +11 +5.85328 +21 +-2.12541 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85328 +20 +-2.12541 +11 +5.85387 +21 +-2.12375 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85387 +20 +-2.12375 +11 +5.85397 +21 +-2.12159 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85397 +20 +-2.12159 +11 +5.85397 +21 +-2.09972 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85397 +20 +-2.09972 +11 +5.85391 +21 +-2.09791 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85391 +20 +-2.09791 +11 +5.85278 +21 +-2.09522 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85278 +20 +-2.09522 +11 +5.84853 +21 +-2.09416 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84853 +20 +-2.09416 +11 +5.8485 +21 +-2.09416 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8485 +20 +-2.09416 +11 +5.84531 +21 +-2.09456 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95991 +20 +-2.12703 +11 +5.96311 +21 +-2.12662 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96311 +20 +-2.12662 +11 +5.96472 +21 +-2.12541 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96472 +20 +-2.12541 +11 +5.96531 +21 +-2.12375 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96531 +20 +-2.12375 +11 +5.96541 +21 +-2.12159 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96541 +20 +-2.12159 +11 +5.96541 +21 +-2.11059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96541 +20 +-2.11059 +11 +5.96494 +21 +-2.10625 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96494 +20 +-2.10625 +11 +5.96356 +21 +-2.10237 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96356 +20 +-2.10237 +11 +5.96125 +21 +-2.09897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96125 +20 +-2.09897 +11 +5.95825 +21 +-2.09633 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95825 +20 +-2.09633 +11 +5.95478 +21 +-2.09475 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95478 +20 +-2.09475 +11 +5.95084 +21 +-2.09422 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95084 +20 +-2.09422 +11 +5.94692 +21 +-2.09517 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94692 +20 +-2.09517 +11 +5.94353 +21 +-2.09803 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94353 +20 +-2.09803 +11 +5.94353 +21 +-2.08422 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94353 +20 +-2.08422 +11 +5.94344 +21 +-2.08206 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94344 +20 +-2.08206 +11 +5.94284 +21 +-2.08041 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94284 +20 +-2.08041 +11 +5.94125 +21 +-2.07914 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94125 +20 +-2.07914 +11 +5.93809 +21 +-2.07872 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93809 +20 +-2.07872 +11 +5.93487 +21 +-2.07914 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93487 +20 +-2.07914 +11 +5.93322 +21 +-2.08041 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93322 +20 +-2.08041 +11 +5.93269 +21 +-2.082 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93269 +20 +-2.082 +11 +5.93259 +21 +-2.08416 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93259 +20 +-2.08416 +11 +5.93259 +21 +-2.12153 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93259 +20 +-2.12153 +11 +5.93269 +21 +-2.12372 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93269 +20 +-2.12372 +11 +5.93322 +21 +-2.12534 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93322 +20 +-2.12534 +11 +5.93486 +21 +-2.12661 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93486 +20 +-2.12661 +11 +5.93803 +21 +-2.12703 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.93803 +20 +-2.12703 +11 +5.94123 +21 +-2.12662 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94123 +20 +-2.12662 +11 +5.94284 +21 +-2.12541 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94284 +20 +-2.12541 +11 +5.94344 +21 +-2.12375 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94344 +20 +-2.12375 +11 +5.94353 +21 +-2.12159 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94353 +20 +-2.12159 +11 +5.94353 +21 +-2.10947 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94353 +20 +-2.10947 +11 +5.94547 +21 +-2.10644 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94547 +20 +-2.10644 +11 +5.94937 +21 +-2.10509 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.94937 +20 +-2.10509 +11 +5.95303 +21 +-2.10653 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95303 +20 +-2.10653 +11 +5.95447 +21 +-2.11053 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95447 +20 +-2.11053 +11 +5.95447 +21 +-2.12147 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95447 +20 +-2.12147 +11 +5.95456 +21 +-2.12372 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95456 +20 +-2.12372 +11 +5.95516 +21 +-2.12541 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95516 +20 +-2.12541 +11 +5.95681 +21 +-2.12662 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.95681 +20 +-2.12662 +11 +5.95991 +21 +-2.12703 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97584 +20 +-2.12703 +11 +5.97903 +21 +-2.12662 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97903 +20 +-2.12662 +11 +5.98072 +21 +-2.12541 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98072 +20 +-2.12541 +11 +5.98131 +21 +-2.12375 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98131 +20 +-2.12375 +11 +5.98141 +21 +-2.12159 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98141 +20 +-2.12159 +11 +5.98141 +21 +-2.10847 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98141 +20 +-2.10847 +11 +5.98287 +21 +-2.10559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98287 +20 +-2.10559 +11 +5.98603 +21 +-2.10441 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98603 +20 +-2.10441 +11 +5.98875 +21 +-2.10491 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98875 +20 +-2.10491 +11 +5.99091 +21 +-2.10541 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99091 +20 +-2.10541 +11 +5.99434 +21 +-2.10303 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99434 +20 +-2.10303 +11 +5.99553 +21 +-2.09866 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99553 +20 +-2.09866 +11 +5.99475 +21 +-2.09575 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99475 +20 +-2.09575 +11 +5.99278 +21 +-2.09447 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99278 +20 +-2.09447 +11 +5.99059 +21 +-2.09394 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99059 +20 +-2.09394 +11 +5.98813 +21 +-2.09378 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98813 +20 +-2.09378 +11 +5.98472 +21 +-2.09484 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98472 +20 +-2.09484 +11 +5.98219 +21 +-2.09653 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98219 +20 +-2.09653 +11 +5.98128 +21 +-2.09759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98128 +20 +-2.09759 +11 +5.98059 +21 +-2.09553 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98059 +20 +-2.09553 +11 +5.97895 +21 +-2.09445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97895 +20 +-2.09445 +11 +5.97591 +21 +-2.09409 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97591 +20 +-2.09409 +11 +5.97269 +21 +-2.09452 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97269 +20 +-2.09452 +11 +5.97103 +21 +-2.09578 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97103 +20 +-2.09578 +11 +5.9705 +21 +-2.09737 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9705 +20 +-2.09737 +11 +5.97041 +21 +-2.09953 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97041 +20 +-2.09953 +11 +5.97041 +21 +-2.12147 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97041 +20 +-2.12147 +11 +5.97041 +21 +-2.12328 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97041 +20 +-2.12328 +11 +5.97153 +21 +-2.12597 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97153 +20 +-2.12597 +11 +5.97584 +21 +-2.12703 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11547 +20 +-2.12703 +11 +6.11867 +21 +-2.12661 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11867 +20 +-2.12661 +11 +6.12028 +21 +-2.12534 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12028 +20 +-2.12534 +11 +6.12087 +21 +-2.12369 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12087 +20 +-2.12369 +11 +6.12097 +21 +-2.12153 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12097 +20 +-2.12153 +11 +6.12097 +21 +-2.11059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12097 +20 +-2.11059 +11 +6.12059 +21 +-2.10524 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12059 +20 +-2.10524 +11 +6.11947 +21 +-2.101 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11947 +20 +-2.101 +11 +6.11759 +21 +-2.09788 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11759 +20 +-2.09788 +11 +6.11381 +21 +-2.09499 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11381 +20 +-2.09499 +11 +6.10922 +21 +-2.09403 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10922 +20 +-2.09403 +11 +6.10484 +21 +-2.09525 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10484 +20 +-2.09525 +11 +6.10175 +21 +-2.0975 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10175 +20 +-2.0975 +11 +6.10009 +21 +-2.09947 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10009 +20 +-2.09947 +11 +6.09765 +21 +-2.09645 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09765 +20 +-2.09645 +11 +6.09448 +21 +-2.09464 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09448 +20 +-2.09464 +11 +6.09059 +21 +-2.09403 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09059 +20 +-2.09403 +11 +6.08677 +21 +-2.09514 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08677 +20 +-2.09514 +11 +6.08353 +21 +-2.09847 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08353 +20 +-2.09847 +11 +6.08247 +21 +-2.09522 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08247 +20 +-2.09522 +11 +6.07791 +21 +-2.09409 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07791 +20 +-2.09409 +11 +6.07505 +21 +-2.09452 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07505 +20 +-2.09452 +11 +6.07347 +21 +-2.09578 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07347 +20 +-2.09578 +11 +6.07287 +21 +-2.09737 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07287 +20 +-2.09737 +11 +6.07278 +21 +-2.09953 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07278 +20 +-2.09953 +11 +6.07278 +21 +-2.12153 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07278 +20 +-2.12153 +11 +6.07287 +21 +-2.12372 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07287 +20 +-2.12372 +11 +6.07341 +21 +-2.12534 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07341 +20 +-2.12534 +11 +6.07505 +21 +-2.12661 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07505 +20 +-2.12661 +11 +6.07822 +21 +-2.12703 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07822 +20 +-2.12703 +11 +6.08141 +21 +-2.12662 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08141 +20 +-2.12662 +11 +6.08309 +21 +-2.12541 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08309 +20 +-2.12541 +11 +6.08369 +21 +-2.12375 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08369 +20 +-2.12375 +11 +6.08378 +21 +-2.12159 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08378 +20 +-2.12159 +11 +6.08378 +21 +-2.11053 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08378 +20 +-2.11053 +11 +6.08472 +21 +-2.10645 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08472 +20 +-2.10645 +11 +6.08753 +21 +-2.10509 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08753 +20 +-2.10509 +11 +6.09044 +21 +-2.10645 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09044 +20 +-2.10645 +11 +6.09141 +21 +-2.11053 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09141 +20 +-2.11053 +11 +6.09141 +21 +-2.12147 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09141 +20 +-2.12147 +11 +6.0915 +21 +-2.12363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0915 +20 +-2.12363 +11 +6.09203 +21 +-2.12528 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09203 +20 +-2.12528 +11 +6.09367 +21 +-2.12659 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09367 +20 +-2.12659 +11 +6.09684 +21 +-2.12703 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09684 +20 +-2.12703 +11 +6.10006 +21 +-2.12661 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10006 +20 +-2.12661 +11 +6.10172 +21 +-2.12534 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10172 +20 +-2.12534 +11 +6.10231 +21 +-2.12372 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10231 +20 +-2.12372 +11 +6.10241 +21 +-2.12153 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10241 +20 +-2.12153 +11 +6.10241 +21 +-2.11059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10241 +20 +-2.11059 +11 +6.10319 +21 +-2.10653 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10319 +20 +-2.10653 +11 +6.10616 +21 +-2.10509 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10616 +20 +-2.10509 +11 +6.10906 +21 +-2.10645 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10906 +20 +-2.10645 +11 +6.11003 +21 +-2.11053 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11003 +20 +-2.11053 +11 +6.11003 +21 +-2.12147 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11003 +20 +-2.12147 +11 +6.11013 +21 +-2.12363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11013 +20 +-2.12363 +11 +6.11066 +21 +-2.12528 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11066 +20 +-2.12528 +11 +6.1123 +21 +-2.12659 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1123 +20 +-2.12659 +11 +6.11547 +21 +-2.12703 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8485 +20 +-2.08966 +11 +5.85166 +21 +-2.08928 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85166 +20 +-2.08928 +11 +5.85331 +21 +-2.088 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85331 +20 +-2.088 +11 +5.85387 +21 +-2.08637 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85387 +20 +-2.08637 +11 +5.85397 +21 +-2.08422 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85397 +20 +-2.08422 +11 +5.85387 +21 +-2.08206 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85387 +20 +-2.08206 +11 +5.85328 +21 +-2.08041 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85328 +20 +-2.08041 +11 +5.85169 +21 +-2.07914 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.85169 +20 +-2.07914 +11 +5.84853 +21 +-2.07872 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84853 +20 +-2.07872 +11 +5.84531 +21 +-2.07914 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84531 +20 +-2.07914 +11 +5.84366 +21 +-2.08041 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84366 +20 +-2.08041 +11 +5.84312 +21 +-2.082 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84312 +20 +-2.082 +11 +5.84303 +21 +-2.08416 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84303 +20 +-2.08416 +11 +5.84312 +21 +-2.08631 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84312 +20 +-2.08631 +11 +5.84369 +21 +-2.08797 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84369 +20 +-2.08797 +11 +5.84534 +21 +-2.08928 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.84534 +20 +-2.08928 +11 +5.8485 +21 +-2.08966 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67603 +20 +-2.61307 +11 +6.67758 +21 +-2.61437 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67758 +20 +-2.61437 +11 +6.67793 +21 +-2.61635 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67793 +20 +-2.61635 +11 +6.67692 +21 +-2.6181 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67692 +20 +-2.6181 +11 +6.67502 +21 +-2.61879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67502 +20 +-2.61879 +11 +6.66822 +21 +-2.61879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66822 +20 +-2.61879 +11 +6.66552 +21 +-2.62014 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66552 +20 +-2.62014 +11 +6.66419 +21 +-2.62147 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66419 +20 +-2.62147 +11 +6.66089 +21 +-2.62643 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66089 +20 +-2.62643 +11 +6.66016 +21 +-2.62935 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66016 +20 +-2.62935 +11 +6.66245 +21 +-2.6282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66245 +20 +-2.6282 +11 +6.66343 +21 +-2.62791 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66343 +20 +-2.62791 +11 +6.6636 +21 +-2.62795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6636 +20 +-2.62795 +11 +6.66377 +21 +-2.62789 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66377 +20 +-2.62789 +11 +6.67127 +21 +-2.62789 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67127 +20 +-2.62789 +11 +6.67228 +21 +-2.62807 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67228 +20 +-2.62807 +11 +6.67241 +21 +-2.62818 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67241 +20 +-2.62818 +11 +6.67259 +21 +-2.6282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67259 +20 +-2.6282 +11 +6.67634 +21 +-2.63007 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67634 +20 +-2.63007 +11 +6.67705 +21 +-2.6306 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67705 +20 +-2.6306 +11 +6.67711 +21 +-2.63063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67711 +20 +-2.63063 +11 +6.67898 +21 +-2.6325 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67898 +20 +-2.6325 +11 +6.67949 +21 +-2.63322 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67949 +20 +-2.63322 +11 +6.67953 +21 +-2.63327 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67953 +20 +-2.63327 +11 +6.68141 +21 +-2.63702 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68141 +20 +-2.63702 +11 +6.6817 +21 +-2.638 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6817 +20 +-2.638 +11 +6.68166 +21 +-2.63817 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68166 +20 +-2.63817 +11 +6.68172 +21 +-2.63834 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68172 +20 +-2.63834 +11 +6.68172 +21 +-2.64771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68172 +20 +-2.64771 +11 +6.68154 +21 +-2.64872 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68154 +20 +-2.64872 +11 +6.68143 +21 +-2.64886 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68143 +20 +-2.64886 +11 +6.68141 +21 +-2.64903 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68141 +20 +-2.64903 +11 +6.67953 +21 +-2.65278 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67953 +20 +-2.65278 +11 +6.67901 +21 +-2.65349 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67901 +20 +-2.65349 +11 +6.67898 +21 +-2.65355 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67898 +20 +-2.65355 +11 +6.67711 +21 +-2.65542 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67711 +20 +-2.65542 +11 +6.67638 +21 +-2.65593 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67638 +20 +-2.65593 +11 +6.67634 +21 +-2.65598 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67634 +20 +-2.65598 +11 +6.67259 +21 +-2.65785 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67259 +20 +-2.65785 +11 +6.67161 +21 +-2.65815 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67161 +20 +-2.65815 +11 +6.67144 +21 +-2.6581 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67144 +20 +-2.6581 +11 +6.67127 +21 +-2.65816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67127 +20 +-2.65816 +11 +6.66377 +21 +-2.65816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66377 +20 +-2.65816 +11 +6.66276 +21 +-2.65799 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66276 +20 +-2.65799 +11 +6.66262 +21 +-2.65787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66262 +20 +-2.65787 +11 +6.66245 +21 +-2.65785 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66245 +20 +-2.65785 +11 +6.6587 +21 +-2.65598 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6587 +20 +-2.65598 +11 +6.65799 +21 +-2.65545 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65799 +20 +-2.65545 +11 +6.65793 +21 +-2.65542 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65793 +20 +-2.65542 +11 +6.65606 +21 +-2.65355 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65606 +20 +-2.65355 +11 +6.65555 +21 +-2.65283 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65555 +20 +-2.65283 +11 +6.6555 +21 +-2.65278 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6555 +20 +-2.65278 +11 +6.65363 +21 +-2.64903 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65363 +20 +-2.64903 +11 +6.65334 +21 +-2.64805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65334 +20 +-2.64805 +11 +6.65338 +21 +-2.64788 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65338 +20 +-2.64788 +11 +6.65332 +21 +-2.64771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65332 +20 +-2.64771 +11 +6.65332 +21 +-2.63271 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65332 +20 +-2.63271 +11 +6.65342 +21 +-2.63213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65342 +20 +-2.63213 +11 +6.65341 +21 +-2.632 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65341 +20 +-2.632 +11 +6.65528 +21 +-2.6245 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65528 +20 +-2.6245 +11 +6.65568 +21 +-2.62359 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65568 +20 +-2.62359 +11 +6.65569 +21 +-2.62358 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65569 +20 +-2.62358 +11 +6.65944 +21 +-2.61795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65944 +20 +-2.61795 +11 +6.65975 +21 +-2.61763 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65975 +20 +-2.61763 +11 +6.65981 +21 +-2.6175 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65981 +20 +-2.6175 +11 +6.66168 +21 +-2.61563 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66168 +20 +-2.61563 +11 +6.66241 +21 +-2.61512 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66241 +20 +-2.61512 +11 +6.66245 +21 +-2.61508 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66245 +20 +-2.61508 +11 +6.6662 +21 +-2.6132 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6662 +20 +-2.6132 +11 +6.66718 +21 +-2.61291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66718 +20 +-2.61291 +11 +6.66735 +21 +-2.61295 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66735 +20 +-2.61295 +11 +6.66752 +21 +-2.61289 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66752 +20 +-2.61289 +11 +6.67502 +21 +-2.61289 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67502 +20 +-2.61289 +11 +6.67603 +21 +-2.61307 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66177 +20 +-2.63514 +11 +6.66057 +21 +-2.63634 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66057 +20 +-2.63634 +11 +6.65922 +21 +-2.63904 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65922 +20 +-2.63904 +11 +6.65922 +21 +-2.64702 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65922 +20 +-2.64702 +11 +6.66057 +21 +-2.64971 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66057 +20 +-2.64971 +11 +6.66177 +21 +-2.65091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66177 +20 +-2.65091 +11 +6.66447 +21 +-2.65226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66447 +20 +-2.65226 +11 +6.67057 +21 +-2.65226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67057 +20 +-2.65226 +11 +6.67327 +21 +-2.65091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67327 +20 +-2.65091 +11 +6.67447 +21 +-2.64971 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67447 +20 +-2.64971 +11 +6.67582 +21 +-2.64702 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67582 +20 +-2.64702 +11 +6.67582 +21 +-2.63904 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67582 +20 +-2.63904 +11 +6.67447 +21 +-2.63634 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67447 +20 +-2.63634 +11 +6.67327 +21 +-2.63514 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67327 +20 +-2.63514 +11 +6.67057 +21 +-2.63379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67057 +20 +-2.63379 +11 +6.66447 +21 +-2.63379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66447 +20 +-2.63379 +11 +6.66177 +21 +-2.63514 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62902 +20 +-2.61304 +11 +6.62908 +21 +-2.61304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62908 +20 +-2.61304 +11 +6.63471 +21 +-2.61492 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63471 +20 +-2.61492 +11 +6.63561 +21 +-2.6154 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63561 +20 +-2.6154 +11 +6.6357 +21 +-2.61555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6357 +20 +-2.61555 +11 +6.63586 +21 +-2.61563 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63586 +20 +-2.61563 +11 +6.63961 +21 +-2.61938 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63961 +20 +-2.61938 +11 +6.64012 +21 +-2.6201 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64012 +20 +-2.6201 +11 +6.64016 +21 +-2.62015 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64016 +20 +-2.62015 +11 +6.64204 +21 +-2.6239 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64204 +20 +-2.6239 +11 +6.64218 +21 +-2.62438 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64218 +20 +-2.62438 +11 +6.64226 +21 +-2.6245 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64226 +20 +-2.6245 +11 +6.64414 +21 +-2.632 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64414 +20 +-2.632 +11 +6.64418 +21 +-2.63259 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64418 +20 +-2.63259 +11 +6.64423 +21 +-2.63271 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64423 +20 +-2.63271 +11 +6.64423 +21 +-2.63834 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64423 +20 +-2.63834 +11 +6.64412 +21 +-2.63892 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64412 +20 +-2.63892 +11 +6.64414 +21 +-2.63906 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64414 +20 +-2.63906 +11 +6.64226 +21 +-2.64655 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64226 +20 +-2.64655 +11 +6.64206 +21 +-2.64702 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64206 +20 +-2.64702 +11 +6.64204 +21 +-2.64716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64204 +20 +-2.64716 +11 +6.64016 +21 +-2.65091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64016 +20 +-2.65091 +11 +6.63964 +21 +-2.65162 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63964 +20 +-2.65162 +11 +6.63961 +21 +-2.65168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63961 +20 +-2.65168 +11 +6.63586 +21 +-2.65542 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63586 +20 +-2.65542 +11 +6.63502 +21 +-2.65601 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63502 +20 +-2.65601 +11 +6.63485 +21 +-2.65603 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63485 +20 +-2.65603 +11 +6.63471 +21 +-2.65614 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63471 +20 +-2.65614 +11 +6.62908 +21 +-2.65801 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62908 +20 +-2.65801 +11 +6.62821 +21 +-2.65814 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62821 +20 +-2.65814 +11 +6.62815 +21 +-2.65816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62815 +20 +-2.65816 +11 +6.61878 +21 +-2.65816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61878 +20 +-2.65816 +11 +6.61839 +21 +-2.6581 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61839 +20 +-2.6581 +11 +6.61826 +21 +-2.65812 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61826 +20 +-2.65812 +11 +6.61815 +21 +-2.65805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61815 +20 +-2.65805 +11 +6.61777 +21 +-2.65799 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61777 +20 +-2.65799 +11 +6.61718 +21 +-2.65749 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61718 +20 +-2.65749 +11 +6.61651 +21 +-2.65711 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61651 +20 +-2.65711 +11 +6.61642 +21 +-2.65686 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61642 +20 +-2.65686 +11 +6.61622 +21 +-2.65669 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61622 +20 +-2.65669 +11 +6.61609 +21 +-2.65593 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61609 +20 +-2.65593 +11 +6.61582 +21 +-2.65521 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61582 +20 +-2.65521 +11 +6.61582 +21 +-2.61584 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61582 +20 +-2.61584 +11 +6.61589 +21 +-2.61546 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61589 +20 +-2.61546 +11 +6.61587 +21 +-2.61533 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61587 +20 +-2.61533 +11 +6.61593 +21 +-2.61522 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61593 +20 +-2.61522 +11 +6.616 +21 +-2.61483 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.616 +20 +-2.61483 +11 +6.61649 +21 +-2.61424 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61649 +20 +-2.61424 +11 +6.61688 +21 +-2.61358 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61688 +20 +-2.61358 +11 +6.61713 +21 +-2.61349 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61713 +20 +-2.61349 +11 +6.6173 +21 +-2.61328 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6173 +20 +-2.61328 +11 +6.61805 +21 +-2.61315 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61805 +20 +-2.61315 +11 +6.61878 +21 +-2.61289 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61878 +20 +-2.61289 +11 +6.62815 +21 +-2.61289 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62815 +20 +-2.61289 +11 +6.62902 +21 +-2.61304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62173 +20 +-2.65226 +11 +6.62767 +21 +-2.65226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62767 +20 +-2.65226 +11 +6.63218 +21 +-2.65076 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63218 +20 +-2.65076 +11 +6.6351 +21 +-2.64784 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6351 +20 +-2.64784 +11 +6.63661 +21 +-2.64481 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63661 +20 +-2.64481 +11 +6.63832 +21 +-2.63798 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63832 +20 +-2.63798 +11 +6.63832 +21 +-2.63308 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63832 +20 +-2.63308 +11 +6.63661 +21 +-2.62625 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63661 +20 +-2.62625 +11 +6.6351 +21 +-2.62322 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6351 +20 +-2.62322 +11 +6.63218 +21 +-2.6203 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63218 +20 +-2.6203 +11 +6.62767 +21 +-2.61879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62767 +20 +-2.61879 +11 +6.62173 +21 +-2.61879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62173 +20 +-2.61879 +11 +6.62173 +21 +-2.65226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30561 +20 +-2.61879 +11 +6.3063 +21 +-2.62046 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3063 +20 +-2.62046 +11 +6.3063 +21 +-2.64103 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3063 +20 +-2.64103 +11 +6.30561 +21 +-2.6427 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30561 +20 +-2.6427 +11 +6.30394 +21 +-2.6434 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30394 +20 +-2.6434 +11 +6.30227 +21 +-2.6427 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30227 +20 +-2.6427 +11 +6.30157 +21 +-2.64103 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30157 +20 +-2.64103 +11 +6.30157 +21 +-2.62046 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30157 +20 +-2.62046 +11 +6.30227 +21 +-2.61879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30227 +20 +-2.61879 +11 +6.30394 +21 +-2.6181 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30394 +20 +-2.6181 +11 +6.30561 +21 +-2.61879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24773 +20 +-2.61879 +11 +6.24843 +21 +-2.62046 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24843 +20 +-2.62046 +11 +6.24843 +21 +-2.64103 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24843 +20 +-2.64103 +11 +6.24773 +21 +-2.6427 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24773 +20 +-2.6427 +11 +6.24606 +21 +-2.6434 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24606 +20 +-2.6434 +11 +6.24439 +21 +-2.6427 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24439 +20 +-2.6427 +11 +6.2437 +21 +-2.64103 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2437 +20 +-2.64103 +11 +6.2437 +21 +-2.62046 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2437 +20 +-2.62046 +11 +6.24439 +21 +-2.61879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24439 +20 +-2.61879 +11 +6.24606 +21 +-2.6181 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24606 +20 +-2.6181 +11 +6.24773 +21 +-2.61879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44696 +20 +-2.62514 +11 +6.44765 +21 +-2.62681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44765 +20 +-2.62681 +11 +6.44696 +21 +-2.62848 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44696 +20 +-2.62848 +11 +6.44529 +21 +-2.62917 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44529 +20 +-2.62917 +11 +6.42471 +21 +-2.62917 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42471 +20 +-2.62917 +11 +6.42304 +21 +-2.62848 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42304 +20 +-2.62848 +11 +6.42235 +21 +-2.62681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42235 +20 +-2.62681 +11 +6.42304 +21 +-2.62514 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42304 +20 +-2.62514 +11 +6.42471 +21 +-2.62445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.42471 +20 +-2.62445 +11 +6.44529 +21 +-2.62445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.44529 +20 +-2.62445 +11 +6.44696 +21 +-2.62514 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60806 +20 +-2.50804 +11 +6.60813 +21 +-2.50804 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60813 +20 +-2.50804 +11 +6.61375 +21 +-2.50992 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61375 +20 +-2.50992 +11 +6.61465 +21 +-2.5104 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61465 +20 +-2.5104 +11 +6.61474 +21 +-2.51055 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61474 +20 +-2.51055 +11 +6.6149 +21 +-2.51063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6149 +20 +-2.51063 +11 +6.61678 +21 +-2.5125 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61678 +20 +-2.5125 +11 +6.61737 +21 +-2.51334 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61737 +20 +-2.51334 +11 +6.61754 +21 +-2.51536 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61754 +20 +-2.51536 +11 +6.61638 +21 +-2.51701 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61638 +20 +-2.51701 +11 +6.61443 +21 +-2.51753 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61443 +20 +-2.51753 +11 +6.6126 +21 +-2.51668 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6126 +20 +-2.51668 +11 +6.61122 +21 +-2.5153 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61122 +20 +-2.5153 +11 +6.60671 +21 +-2.51379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60671 +20 +-2.51379 +11 +6.60392 +21 +-2.51379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60392 +20 +-2.51379 +11 +6.59941 +21 +-2.5153 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59941 +20 +-2.5153 +11 +6.59649 +21 +-2.51822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59649 +20 +-2.51822 +11 +6.59498 +21 +-2.52125 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59498 +20 +-2.52125 +11 +6.59327 +21 +-2.52808 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59327 +20 +-2.52808 +11 +6.59327 +21 +-2.53298 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59327 +20 +-2.53298 +11 +6.59498 +21 +-2.53981 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59498 +20 +-2.53981 +11 +6.59649 +21 +-2.54284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59649 +20 +-2.54284 +11 +6.59941 +21 +-2.54576 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59941 +20 +-2.54576 +11 +6.60392 +21 +-2.54726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60392 +20 +-2.54726 +11 +6.60671 +21 +-2.54726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60671 +20 +-2.54726 +11 +6.61122 +21 +-2.54576 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61122 +20 +-2.54576 +11 +6.6126 +21 +-2.54437 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6126 +20 +-2.54437 +11 +6.61344 +21 +-2.54379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61344 +20 +-2.54379 +11 +6.61545 +21 +-2.54361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61545 +20 +-2.54361 +11 +6.61711 +21 +-2.54477 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61711 +20 +-2.54477 +11 +6.61763 +21 +-2.54672 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61763 +20 +-2.54672 +11 +6.61678 +21 +-2.54855 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61678 +20 +-2.54855 +11 +6.6149 +21 +-2.55042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6149 +20 +-2.55042 +11 +6.61406 +21 +-2.55101 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61406 +20 +-2.55101 +11 +6.61389 +21 +-2.55103 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61389 +20 +-2.55103 +11 +6.61375 +21 +-2.55114 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61375 +20 +-2.55114 +11 +6.60813 +21 +-2.55301 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60813 +20 +-2.55301 +11 +6.60725 +21 +-2.55314 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60725 +20 +-2.55314 +11 +6.60719 +21 +-2.55316 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60719 +20 +-2.55316 +11 +6.60344 +21 +-2.55316 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60344 +20 +-2.55316 +11 +6.60257 +21 +-2.55301 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60257 +20 +-2.55301 +11 +6.60251 +21 +-2.55301 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60251 +20 +-2.55301 +11 +6.59688 +21 +-2.55114 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59688 +20 +-2.55114 +11 +6.59598 +21 +-2.55065 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59598 +20 +-2.55065 +11 +6.59589 +21 +-2.5505 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59589 +20 +-2.5505 +11 +6.59573 +21 +-2.55042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59573 +20 +-2.55042 +11 +6.59198 +21 +-2.54668 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59198 +20 +-2.54668 +11 +6.59147 +21 +-2.54595 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59147 +20 +-2.54595 +11 +6.59143 +21 +-2.54591 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59143 +20 +-2.54591 +11 +6.59027 +21 +-2.5436 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59027 +20 +-2.5436 +11 +6.59 +21 +-2.5437 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59 +20 +-2.5437 +11 +6.53622 +21 +-2.5437 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53622 +20 +-2.5437 +11 +6.51295 +21 +-2.56697 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51295 +20 +-2.56697 +11 +6.51295 +21 +-2.60575 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51295 +20 +-2.60575 +11 +6.51292 +21 +-2.60593 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51292 +20 +-2.60593 +11 +6.51294 +21 +-2.60601 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51294 +20 +-2.60601 +11 +6.51289 +21 +-2.60612 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51289 +20 +-2.60612 +11 +6.51277 +21 +-2.60676 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51277 +20 +-2.60676 +11 +6.51236 +21 +-2.60725 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51236 +20 +-2.60725 +11 +6.51209 +21 +-2.60784 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51209 +20 +-2.60784 +11 +6.49209 +21 +-2.62784 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49209 +20 +-2.62784 +11 +6.49125 +21 +-2.62842 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49125 +20 +-2.62842 +11 +6.48924 +21 +-2.6286 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48924 +20 +-2.6286 +11 +6.48758 +21 +-2.62744 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48758 +20 +-2.62744 +11 +6.48706 +21 +-2.62549 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48706 +20 +-2.62549 +11 +6.48791 +21 +-2.62366 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48791 +20 +-2.62366 +11 +6.50705 +21 +-2.60452 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50705 +20 +-2.60452 +11 +6.50705 +21 +-2.56575 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50705 +20 +-2.56575 +11 +6.50708 +21 +-2.56557 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50708 +20 +-2.56557 +11 +6.50706 +21 +-2.56549 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50706 +20 +-2.56549 +11 +6.50711 +21 +-2.56537 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50711 +20 +-2.56537 +11 +6.50723 +21 +-2.56474 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50723 +20 +-2.56474 +11 +6.50764 +21 +-2.56424 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50764 +20 +-2.56424 +11 +6.50791 +21 +-2.56366 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50791 +20 +-2.56366 +11 +6.53291 +21 +-2.53866 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53291 +20 +-2.53866 +11 +6.53306 +21 +-2.53855 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53306 +20 +-2.53855 +11 +6.5331 +21 +-2.53849 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5331 +20 +-2.53849 +11 +6.53322 +21 +-2.53844 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53322 +20 +-2.53844 +11 +6.53375 +21 +-2.53807 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53375 +20 +-2.53807 +11 +6.53439 +21 +-2.53802 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53439 +20 +-2.53802 +11 +6.535 +21 +-2.5378 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.535 +20 +-2.5378 +11 +6.58839 +21 +-2.5378 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58839 +20 +-2.5378 +11 +6.58745 +21 +-2.53406 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58745 +20 +-2.53406 +11 +6.58741 +21 +-2.53347 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58741 +20 +-2.53347 +11 +6.58737 +21 +-2.53334 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58737 +20 +-2.53334 +11 +6.58737 +21 +-2.52771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58737 +20 +-2.52771 +11 +6.58747 +21 +-2.52713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58747 +20 +-2.52713 +11 +6.58745 +21 +-2.527 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58745 +20 +-2.527 +11 +6.58933 +21 +-2.5195 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58933 +20 +-2.5195 +11 +6.58954 +21 +-2.51903 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58954 +20 +-2.51903 +11 +6.58955 +21 +-2.5189 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58955 +20 +-2.5189 +11 +6.59143 +21 +-2.51515 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59143 +20 +-2.51515 +11 +6.59195 +21 +-2.51444 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59195 +20 +-2.51444 +11 +6.59198 +21 +-2.51438 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59198 +20 +-2.51438 +11 +6.59573 +21 +-2.51063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59573 +20 +-2.51063 +11 +6.59657 +21 +-2.51004 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59657 +20 +-2.51004 +11 +6.59675 +21 +-2.51002 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59675 +20 +-2.51002 +11 +6.59688 +21 +-2.50992 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59688 +20 +-2.50992 +11 +6.60251 +21 +-2.50804 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60251 +20 +-2.50804 +11 +6.60338 +21 +-2.50791 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60338 +20 +-2.50791 +11 +6.60344 +21 +-2.50789 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60344 +20 +-2.50789 +11 +6.60719 +21 +-2.50789 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60719 +20 +-2.50789 +11 +6.60806 +21 +-2.50804 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04097 +20 +-2.58296 +11 +6.04114 +21 +-2.58293 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04114 +20 +-2.58293 +11 +6.04188 +21 +-2.58336 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04188 +20 +-2.58336 +11 +6.04266 +21 +-2.58371 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04266 +20 +-2.58371 +11 +6.04274 +21 +-2.58386 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04274 +20 +-2.58386 +11 +6.04288 +21 +-2.58394 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04288 +20 +-2.58394 +11 +6.04318 +21 +-2.58475 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04318 +20 +-2.58475 +11 +6.04356 +21 +-2.58552 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04356 +20 +-2.58552 +11 +6.04352 +21 +-2.58568 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04352 +20 +-2.58568 +11 +6.04358 +21 +-2.58584 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04358 +20 +-2.58584 +11 +6.04358 +21 +-2.62226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04358 +20 +-2.62226 +11 +6.05187 +21 +-2.62226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05187 +20 +-2.62226 +11 +6.05288 +21 +-2.62244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05288 +20 +-2.62244 +11 +6.05443 +21 +-2.62374 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05443 +20 +-2.62374 +11 +6.05478 +21 +-2.62572 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05478 +20 +-2.62572 +11 +6.05377 +21 +-2.62747 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05377 +20 +-2.62747 +11 +6.05187 +21 +-2.62816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05187 +20 +-2.62816 +11 +6.02937 +21 +-2.62816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02937 +20 +-2.62816 +11 +6.02836 +21 +-2.62799 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02836 +20 +-2.62799 +11 +6.02682 +21 +-2.62669 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02682 +20 +-2.62669 +11 +6.02647 +21 +-2.6247 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02647 +20 +-2.6247 +11 +6.02748 +21 +-2.62295 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02748 +20 +-2.62295 +11 +6.02937 +21 +-2.62226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02937 +20 +-2.62226 +11 +6.03767 +21 +-2.62226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03767 +20 +-2.62226 +11 +6.03767 +21 +-2.59485 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03767 +20 +-2.59485 +11 +6.03521 +21 +-2.5973 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03521 +20 +-2.5973 +11 +6.03449 +21 +-2.59781 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03449 +20 +-2.59781 +11 +6.03444 +21 +-2.59786 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03444 +20 +-2.59786 +11 +6.03069 +21 +-2.59973 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03069 +20 +-2.59973 +11 +6.02971 +21 +-2.60002 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02971 +20 +-2.60002 +11 +6.02775 +21 +-2.59955 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02775 +20 +-2.59955 +11 +6.02654 +21 +-2.59793 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02654 +20 +-2.59793 +11 +6.02666 +21 +-2.59592 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02666 +20 +-2.59592 +11 +6.02805 +21 +-2.59445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02805 +20 +-2.59445 +11 +6.03137 +21 +-2.59279 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03137 +20 +-2.59279 +11 +6.03458 +21 +-2.58958 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03458 +20 +-2.58958 +11 +6.03817 +21 +-2.5842 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03817 +20 +-2.5842 +11 +6.03887 +21 +-2.58346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03887 +20 +-2.58346 +11 +6.03904 +21 +-2.58341 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03904 +20 +-2.58341 +11 +6.03915 +21 +-2.58328 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03915 +20 +-2.58328 +11 +6.03999 +21 +-2.58314 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03999 +20 +-2.58314 +11 +6.04081 +21 +-2.5829 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04081 +20 +-2.5829 +11 +6.04097 +21 +-2.58296 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01476 +20 +-2.58394 +11 +6.01545 +21 +-2.58584 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01545 +20 +-2.58584 +11 +6.01545 +21 +-2.61771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01545 +20 +-2.61771 +11 +6.01528 +21 +-2.61872 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01528 +20 +-2.61872 +11 +6.01516 +21 +-2.61886 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01516 +20 +-2.61886 +11 +6.01514 +21 +-2.61903 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01514 +20 +-2.61903 +11 +6.01327 +21 +-2.62278 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01327 +20 +-2.62278 +11 +6.01274 +21 +-2.62349 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01274 +20 +-2.62349 +11 +6.01271 +21 +-2.62355 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01271 +20 +-2.62355 +11 +6.01084 +21 +-2.62542 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01084 +20 +-2.62542 +11 +6.01012 +21 +-2.62593 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01012 +20 +-2.62593 +11 +6.01007 +21 +-2.62598 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01007 +20 +-2.62598 +11 +6.00632 +21 +-2.62785 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00632 +20 +-2.62785 +11 +6.00534 +21 +-2.62815 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00534 +20 +-2.62815 +11 +6.00517 +21 +-2.6281 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00517 +20 +-2.6281 +11 +6.005 +21 +-2.62816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.005 +20 +-2.62816 +11 +5.9975 +21 +-2.62816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9975 +20 +-2.62816 +11 +5.99649 +21 +-2.62799 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99649 +20 +-2.62799 +11 +5.99636 +21 +-2.62787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99636 +20 +-2.62787 +11 +5.99618 +21 +-2.62785 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99618 +20 +-2.62785 +11 +5.99243 +21 +-2.62598 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99243 +20 +-2.62598 +11 +5.99172 +21 +-2.62545 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99172 +20 +-2.62545 +11 +5.99167 +21 +-2.62542 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99167 +20 +-2.62542 +11 +5.98979 +21 +-2.62355 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98979 +20 +-2.62355 +11 +5.98928 +21 +-2.62283 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98928 +20 +-2.62283 +11 +5.98924 +21 +-2.62278 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98924 +20 +-2.62278 +11 +5.98736 +21 +-2.61903 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98736 +20 +-2.61903 +11 +5.98707 +21 +-2.61805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98707 +20 +-2.61805 +11 +5.98711 +21 +-2.61788 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98711 +20 +-2.61788 +11 +5.98705 +21 +-2.61771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98705 +20 +-2.61771 +11 +5.98705 +21 +-2.58584 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98705 +20 +-2.58584 +11 +5.98723 +21 +-2.58483 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98723 +20 +-2.58483 +11 +5.98853 +21 +-2.58328 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98853 +20 +-2.58328 +11 +5.99052 +21 +-2.58293 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99052 +20 +-2.58293 +11 +5.99227 +21 +-2.58394 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99227 +20 +-2.58394 +11 +5.99296 +21 +-2.58584 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99296 +20 +-2.58584 +11 +5.99296 +21 +-2.61702 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99296 +20 +-2.61702 +11 +5.99431 +21 +-2.61971 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99431 +20 +-2.61971 +11 +5.9955 +21 +-2.62091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9955 +20 +-2.62091 +11 +5.9982 +21 +-2.62226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9982 +20 +-2.62226 +11 +6.0043 +21 +-2.62226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0043 +20 +-2.62226 +11 +6.007 +21 +-2.62091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.007 +20 +-2.62091 +11 +6.0082 +21 +-2.61971 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0082 +20 +-2.61971 +11 +6.00955 +21 +-2.61702 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00955 +20 +-2.61702 +11 +6.00955 +21 +-2.58584 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00955 +20 +-2.58584 +11 +6.00973 +21 +-2.58483 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00973 +20 +-2.58483 +11 +6.01102 +21 +-2.58328 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01102 +20 +-2.58328 +11 +6.01301 +21 +-2.58293 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.01301 +20 +-2.58293 +11 +6.01476 +21 +-2.58394 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98153 +20 +-2.40325 +11 +5.98222 +21 +-2.40492 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98222 +20 +-2.40492 +11 +5.98222 +21 +-2.54075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98222 +20 +-2.54075 +11 +5.98222 +21 +-2.61752 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98222 +20 +-2.61752 +11 +5.98153 +21 +-2.61919 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98153 +20 +-2.61919 +11 +5.97986 +21 +-2.61988 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97986 +20 +-2.61988 +11 +5.97819 +21 +-2.61919 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97819 +20 +-2.61919 +11 +5.9775 +21 +-2.61752 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9775 +20 +-2.61752 +11 +5.9775 +21 +-2.54075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9775 +20 +-2.54075 +11 +5.9775 +21 +-2.40492 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.9775 +20 +-2.40492 +11 +5.97819 +21 +-2.40325 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97819 +20 +-2.40325 +11 +5.97986 +21 +-2.40256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97986 +20 +-2.40256 +11 +5.98153 +21 +-2.40325 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77996 +20 +-2.46231 +11 +5.78065 +21 +-2.46398 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78065 +20 +-2.46398 +11 +5.78065 +21 +-2.54075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78065 +20 +-2.54075 +11 +5.78065 +21 +-2.61752 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78065 +20 +-2.61752 +11 +5.77996 +21 +-2.61919 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77996 +20 +-2.61919 +11 +5.77829 +21 +-2.61988 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77829 +20 +-2.61988 +11 +5.77662 +21 +-2.61919 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77662 +20 +-2.61919 +11 +5.77593 +21 +-2.61752 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77593 +20 +-2.61752 +11 +5.77593 +21 +-2.54075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77593 +20 +-2.54075 +11 +5.77593 +21 +-2.46398 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77593 +20 +-2.46398 +11 +5.77662 +21 +-2.46231 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77662 +20 +-2.46231 +11 +5.77829 +21 +-2.46161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77829 +20 +-2.46161 +11 +5.77996 +21 +-2.46231 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22846 +20 +-2.46365 +11 +6.23013 +21 +-2.46435 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23013 +20 +-2.46435 +11 +6.23083 +21 +-2.46602 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23083 +20 +-2.46602 +11 +6.23083 +21 +-2.59436 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23083 +20 +-2.59436 +11 +6.23013 +21 +-2.59603 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23013 +20 +-2.59603 +11 +6.22846 +21 +-2.59672 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22846 +20 +-2.59672 +11 +6.22679 +21 +-2.59603 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22679 +20 +-2.59603 +11 +6.2261 +21 +-2.59436 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2261 +20 +-2.59436 +11 +6.2261 +21 +-2.46838 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2261 +20 +-2.46838 +11 +6.1639 +21 +-2.46838 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1639 +20 +-2.46838 +11 +6.1639 +21 +-2.59436 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1639 +20 +-2.59436 +11 +6.16321 +21 +-2.59603 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16321 +20 +-2.59603 +11 +6.16154 +21 +-2.59672 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16154 +20 +-2.59672 +11 +6.15987 +21 +-2.59603 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15987 +20 +-2.59603 +11 +6.15917 +21 +-2.59436 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15917 +20 +-2.59436 +11 +6.15917 +21 +-2.46602 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15917 +20 +-2.46602 +11 +6.15987 +21 +-2.46435 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15987 +20 +-2.46435 +11 +6.16154 +21 +-2.46365 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16154 +20 +-2.46365 +11 +6.22846 +21 +-2.46365 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47088 +20 +-2.52061 +11 +6.47157 +21 +-2.52228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47157 +20 +-2.52228 +11 +6.47088 +21 +-2.52395 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47088 +20 +-2.52395 +11 +6.46921 +21 +-2.52465 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46921 +20 +-2.52465 +11 +6.34323 +21 +-2.52465 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34323 +20 +-2.52465 +11 +6.34323 +21 +-2.58685 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34323 +20 +-2.58685 +11 +6.46921 +21 +-2.58685 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46921 +20 +-2.58685 +11 +6.47088 +21 +-2.58754 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47088 +20 +-2.58754 +11 +6.47157 +21 +-2.58921 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47157 +20 +-2.58921 +11 +6.47088 +21 +-2.59088 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.47088 +20 +-2.59088 +11 +6.46921 +21 +-2.59157 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46921 +20 +-2.59157 +11 +6.34087 +21 +-2.59157 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34087 +20 +-2.59157 +11 +6.3392 +21 +-2.59088 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3392 +20 +-2.59088 +11 +6.3385 +21 +-2.58921 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3385 +20 +-2.58921 +11 +6.3385 +21 +-2.52228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3385 +20 +-2.52228 +11 +6.3392 +21 +-2.52061 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3392 +20 +-2.52061 +11 +6.34087 +21 +-2.51992 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34087 +20 +-2.51992 +11 +6.46921 +21 +-2.51992 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46921 +20 +-2.51992 +11 +6.47088 +21 +-2.52061 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14944 +20 +-2.51747 +11 +6.14958 +21 +-2.51758 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14958 +20 +-2.51758 +11 +6.14976 +21 +-2.5176 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14976 +20 +-2.5176 +11 +6.1535 +21 +-2.51948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1535 +20 +-2.51948 +11 +6.15421 +21 +-2.52 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15421 +20 +-2.52 +11 +6.15427 +21 +-2.52003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15427 +20 +-2.52003 +11 +6.15615 +21 +-2.5219 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15615 +20 +-2.5219 +11 +6.15665 +21 +-2.52263 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15665 +20 +-2.52263 +11 +6.1567 +21 +-2.52267 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1567 +20 +-2.52267 +11 +6.15857 +21 +-2.52642 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15857 +20 +-2.52642 +11 +6.15887 +21 +-2.5274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15887 +20 +-2.5274 +11 +6.15883 +21 +-2.52758 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15883 +20 +-2.52758 +11 +6.15889 +21 +-2.52774 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15889 +20 +-2.52774 +11 +6.15889 +21 +-2.52962 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15889 +20 +-2.52962 +11 +6.15871 +21 +-2.53063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15871 +20 +-2.53063 +11 +6.15859 +21 +-2.53076 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15859 +20 +-2.53076 +11 +6.15857 +21 +-2.53094 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15857 +20 +-2.53094 +11 +6.1567 +21 +-2.53469 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1567 +20 +-2.53469 +11 +6.15617 +21 +-2.5354 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15617 +20 +-2.5354 +11 +6.15615 +21 +-2.53545 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15615 +20 +-2.53545 +11 +6.15449 +21 +-2.53712 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15449 +20 +-2.53712 +11 +6.15615 +21 +-2.53878 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15615 +20 +-2.53878 +11 +6.15665 +21 +-2.5395 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15665 +20 +-2.5395 +11 +6.1567 +21 +-2.53955 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1567 +20 +-2.53955 +11 +6.15857 +21 +-2.54329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15857 +20 +-2.54329 +11 +6.15887 +21 +-2.54428 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15887 +20 +-2.54428 +11 +6.15883 +21 +-2.54445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15883 +20 +-2.54445 +11 +6.15889 +21 +-2.54462 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15889 +20 +-2.54462 +11 +6.15889 +21 +-2.55211 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15889 +20 +-2.55211 +11 +6.15871 +21 +-2.55312 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15871 +20 +-2.55312 +11 +6.15859 +21 +-2.55326 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15859 +20 +-2.55326 +11 +6.15857 +21 +-2.55343 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15857 +20 +-2.55343 +11 +6.1567 +21 +-2.55718 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1567 +20 +-2.55718 +11 +6.15617 +21 +-2.55789 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15617 +20 +-2.55789 +11 +6.15615 +21 +-2.55795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15615 +20 +-2.55795 +11 +6.15427 +21 +-2.55983 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15427 +20 +-2.55983 +11 +6.15355 +21 +-2.56033 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15355 +20 +-2.56033 +11 +6.1535 +21 +-2.56038 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1535 +20 +-2.56038 +11 +6.14976 +21 +-2.56225 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14976 +20 +-2.56225 +11 +6.14877 +21 +-2.56255 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14877 +20 +-2.56255 +11 +6.1486 +21 +-2.56251 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1486 +20 +-2.56251 +11 +6.14843 +21 +-2.56257 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14843 +20 +-2.56257 +11 +6.14094 +21 +-2.56257 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14094 +20 +-2.56257 +11 +6.13993 +21 +-2.56239 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13993 +20 +-2.56239 +11 +6.13979 +21 +-2.56227 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13979 +20 +-2.56227 +11 +6.13962 +21 +-2.56225 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13962 +20 +-2.56225 +11 +6.13587 +21 +-2.56038 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13587 +20 +-2.56038 +11 +6.13516 +21 +-2.55985 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13516 +20 +-2.55985 +11 +6.1351 +21 +-2.55983 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1351 +20 +-2.55983 +11 +6.13322 +21 +-2.55795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13322 +20 +-2.55795 +11 +6.13272 +21 +-2.55723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13272 +20 +-2.55723 +11 +6.13267 +21 +-2.55718 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13267 +20 +-2.55718 +11 +6.1308 +21 +-2.55343 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1308 +20 +-2.55343 +11 +6.1305 +21 +-2.55245 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1305 +20 +-2.55245 +11 +6.13054 +21 +-2.55228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13054 +20 +-2.55228 +11 +6.13048 +21 +-2.55211 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13048 +20 +-2.55211 +11 +6.13048 +21 +-2.54462 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13048 +20 +-2.54462 +11 +6.13066 +21 +-2.54361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13066 +20 +-2.54361 +11 +6.13078 +21 +-2.54347 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13078 +20 +-2.54347 +11 +6.1308 +21 +-2.54329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1308 +20 +-2.54329 +11 +6.13267 +21 +-2.53955 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13267 +20 +-2.53955 +11 +6.1332 +21 +-2.53884 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1332 +20 +-2.53884 +11 +6.13322 +21 +-2.53878 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13322 +20 +-2.53878 +11 +6.13488 +21 +-2.53712 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13488 +20 +-2.53712 +11 +6.13322 +21 +-2.53545 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13322 +20 +-2.53545 +11 +6.13272 +21 +-2.53473 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13272 +20 +-2.53473 +11 +6.13267 +21 +-2.53469 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13267 +20 +-2.53469 +11 +6.1308 +21 +-2.53094 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1308 +20 +-2.53094 +11 +6.1305 +21 +-2.52995 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1305 +20 +-2.52995 +11 +6.13054 +21 +-2.52978 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13054 +20 +-2.52978 +11 +6.13048 +21 +-2.52962 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13048 +20 +-2.52962 +11 +6.13048 +21 +-2.52774 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13048 +20 +-2.52774 +11 +6.13066 +21 +-2.52673 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13066 +20 +-2.52673 +11 +6.13078 +21 +-2.5266 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13078 +20 +-2.5266 +11 +6.1308 +21 +-2.52642 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1308 +20 +-2.52642 +11 +6.13267 +21 +-2.52267 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13267 +20 +-2.52267 +11 +6.1332 +21 +-2.52196 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1332 +20 +-2.52196 +11 +6.13322 +21 +-2.5219 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13322 +20 +-2.5219 +11 +6.1351 +21 +-2.52003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1351 +20 +-2.52003 +11 +6.13582 +21 +-2.51952 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13582 +20 +-2.51952 +11 +6.13587 +21 +-2.51948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13587 +20 +-2.51948 +11 +6.13962 +21 +-2.5176 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13962 +20 +-2.5176 +11 +6.1406 +21 +-2.51731 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1406 +20 +-2.51731 +11 +6.14077 +21 +-2.51735 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14077 +20 +-2.51735 +11 +6.14094 +21 +-2.51729 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14094 +20 +-2.51729 +11 +6.14843 +21 +-2.51729 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14843 +20 +-2.51729 +11 +6.14944 +21 +-2.51747 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13894 +20 +-2.54142 +11 +6.13774 +21 +-2.54261 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13774 +20 +-2.54261 +11 +6.13639 +21 +-2.54531 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13639 +20 +-2.54531 +11 +6.13639 +21 +-2.55142 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13639 +20 +-2.55142 +11 +6.13774 +21 +-2.55411 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13774 +20 +-2.55411 +11 +6.13894 +21 +-2.55531 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13894 +20 +-2.55531 +11 +6.14163 +21 +-2.55666 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14163 +20 +-2.55666 +11 +6.14774 +21 +-2.55666 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14774 +20 +-2.55666 +11 +6.15043 +21 +-2.55531 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15043 +20 +-2.55531 +11 +6.15163 +21 +-2.55411 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15163 +20 +-2.55411 +11 +6.15298 +21 +-2.55142 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15298 +20 +-2.55142 +11 +6.15298 +21 +-2.54531 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15298 +20 +-2.54531 +11 +6.15163 +21 +-2.54261 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15163 +20 +-2.54261 +11 +6.15043 +21 +-2.54142 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15043 +20 +-2.54142 +11 +6.14774 +21 +-2.54007 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14774 +20 +-2.54007 +11 +6.14163 +21 +-2.54007 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14163 +20 +-2.54007 +11 +6.13894 +21 +-2.54142 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13894 +20 +-2.52454 +11 +6.13774 +21 +-2.52574 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13774 +20 +-2.52574 +11 +6.13639 +21 +-2.52844 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13639 +20 +-2.52844 +11 +6.13639 +21 +-2.52892 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13639 +20 +-2.52892 +11 +6.13774 +21 +-2.53162 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13774 +20 +-2.53162 +11 +6.13894 +21 +-2.53281 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13894 +20 +-2.53281 +11 +6.14163 +21 +-2.53416 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14163 +20 +-2.53416 +11 +6.14774 +21 +-2.53416 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14774 +20 +-2.53416 +11 +6.15043 +21 +-2.53281 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15043 +20 +-2.53281 +11 +6.15163 +21 +-2.53162 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15163 +20 +-2.53162 +11 +6.15298 +21 +-2.52892 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15298 +20 +-2.52892 +11 +6.15298 +21 +-2.52844 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15298 +20 +-2.52844 +11 +6.15163 +21 +-2.52574 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15163 +20 +-2.52574 +11 +6.15043 +21 +-2.52454 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15043 +20 +-2.52454 +11 +6.14774 +21 +-2.5232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14774 +20 +-2.5232 +11 +6.14163 +21 +-2.5232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14163 +20 +-2.5232 +11 +6.13894 +21 +-2.52454 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10618 +20 +-2.51744 +11 +6.10625 +21 +-2.51744 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10625 +20 +-2.51744 +11 +6.11187 +21 +-2.51932 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11187 +20 +-2.51932 +11 +6.11277 +21 +-2.51981 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11277 +20 +-2.51981 +11 +6.11287 +21 +-2.51996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11287 +20 +-2.51996 +11 +6.11303 +21 +-2.52003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11303 +20 +-2.52003 +11 +6.11678 +21 +-2.52378 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11678 +20 +-2.52378 +11 +6.11728 +21 +-2.5245 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11728 +20 +-2.5245 +11 +6.11733 +21 +-2.52455 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11733 +20 +-2.52455 +11 +6.1192 +21 +-2.5283 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1192 +20 +-2.5283 +11 +6.11935 +21 +-2.52879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11935 +20 +-2.52879 +11 +6.11943 +21 +-2.5289 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11943 +20 +-2.5289 +11 +6.1213 +21 +-2.5364 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1213 +20 +-2.5364 +11 +6.12134 +21 +-2.53699 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12134 +20 +-2.53699 +11 +6.12139 +21 +-2.53712 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12139 +20 +-2.53712 +11 +6.12139 +21 +-2.54274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12139 +20 +-2.54274 +11 +6.12129 +21 +-2.54332 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12129 +20 +-2.54332 +11 +6.1213 +21 +-2.54346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1213 +20 +-2.54346 +11 +6.11943 +21 +-2.55096 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11943 +20 +-2.55096 +11 +6.11922 +21 +-2.55142 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11922 +20 +-2.55142 +11 +6.1192 +21 +-2.55156 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1192 +20 +-2.55156 +11 +6.11733 +21 +-2.55531 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11733 +20 +-2.55531 +11 +6.1168 +21 +-2.55602 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1168 +20 +-2.55602 +11 +6.11678 +21 +-2.55608 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11678 +20 +-2.55608 +11 +6.11303 +21 +-2.55983 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11303 +20 +-2.55983 +11 +6.11219 +21 +-2.56041 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11219 +20 +-2.56041 +11 +6.11201 +21 +-2.56043 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11201 +20 +-2.56043 +11 +6.11187 +21 +-2.56054 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11187 +20 +-2.56054 +11 +6.10625 +21 +-2.56241 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10625 +20 +-2.56241 +11 +6.10538 +21 +-2.56254 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10538 +20 +-2.56254 +11 +6.10531 +21 +-2.56257 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10531 +20 +-2.56257 +11 +6.09594 +21 +-2.56257 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09594 +20 +-2.56257 +11 +6.09556 +21 +-2.5625 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09556 +20 +-2.5625 +11 +6.09543 +21 +-2.56252 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09543 +20 +-2.56252 +11 +6.09531 +21 +-2.56246 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09531 +20 +-2.56246 +11 +6.09493 +21 +-2.56239 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09493 +20 +-2.56239 +11 +6.09434 +21 +-2.56189 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09434 +20 +-2.56189 +11 +6.09368 +21 +-2.56151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09368 +20 +-2.56151 +11 +6.09359 +21 +-2.56126 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09359 +20 +-2.56126 +11 +6.09338 +21 +-2.56109 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09338 +20 +-2.56109 +11 +6.09325 +21 +-2.56033 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09325 +20 +-2.56033 +11 +6.09299 +21 +-2.55961 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09299 +20 +-2.55961 +11 +6.09299 +21 +-2.52024 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09299 +20 +-2.52024 +11 +6.09306 +21 +-2.51986 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09306 +20 +-2.51986 +11 +6.09303 +21 +-2.51973 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09303 +20 +-2.51973 +11 +6.0931 +21 +-2.51962 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0931 +20 +-2.51962 +11 +6.09317 +21 +-2.51923 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09317 +20 +-2.51923 +11 +6.09366 +21 +-2.51865 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09366 +20 +-2.51865 +11 +6.09404 +21 +-2.51798 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09404 +20 +-2.51798 +11 +6.09429 +21 +-2.51789 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09429 +20 +-2.51789 +11 +6.09446 +21 +-2.51769 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09446 +20 +-2.51769 +11 +6.09522 +21 +-2.51755 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09522 +20 +-2.51755 +11 +6.09594 +21 +-2.51729 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09594 +20 +-2.51729 +11 +6.10531 +21 +-2.51729 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10531 +20 +-2.51729 +11 +6.10618 +21 +-2.51744 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09889 +20 +-2.55666 +11 +6.10484 +21 +-2.55666 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10484 +20 +-2.55666 +11 +6.10934 +21 +-2.55516 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10934 +20 +-2.55516 +11 +6.11226 +21 +-2.55224 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11226 +20 +-2.55224 +11 +6.11378 +21 +-2.54921 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11378 +20 +-2.54921 +11 +6.11549 +21 +-2.54238 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11549 +20 +-2.54238 +11 +6.11549 +21 +-2.53748 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11549 +20 +-2.53748 +11 +6.11378 +21 +-2.53065 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11378 +20 +-2.53065 +11 +6.11226 +21 +-2.52762 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11226 +20 +-2.52762 +11 +6.10934 +21 +-2.5247 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10934 +20 +-2.5247 +11 +6.10484 +21 +-2.5232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10484 +20 +-2.5232 +11 +6.09889 +21 +-2.5232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09889 +20 +-2.5232 +11 +6.09889 +21 +-2.55666 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68882 +20 +-2.50807 +11 +6.69036 +21 +-2.50937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.69036 +20 +-2.50937 +11 +6.69071 +21 +-2.51135 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.69071 +20 +-2.51135 +11 +6.6897 +21 +-2.5131 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6897 +20 +-2.5131 +11 +6.68781 +21 +-2.51379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68781 +20 +-2.51379 +11 +6.67173 +21 +-2.51379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67173 +20 +-2.51379 +11 +6.67075 +21 +-2.52357 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67075 +20 +-2.52357 +11 +6.67149 +21 +-2.5232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67149 +20 +-2.5232 +11 +6.67247 +21 +-2.52291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67247 +20 +-2.52291 +11 +6.67264 +21 +-2.52295 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67264 +20 +-2.52295 +11 +6.67281 +21 +-2.52289 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67281 +20 +-2.52289 +11 +6.68218 +21 +-2.52289 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68218 +20 +-2.52289 +11 +6.68319 +21 +-2.52307 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68319 +20 +-2.52307 +11 +6.68333 +21 +-2.52318 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68333 +20 +-2.52318 +11 +6.6835 +21 +-2.5232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6835 +20 +-2.5232 +11 +6.68725 +21 +-2.52507 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68725 +20 +-2.52507 +11 +6.68796 +21 +-2.5256 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68796 +20 +-2.5256 +11 +6.68802 +21 +-2.52563 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68802 +20 +-2.52563 +11 +6.68989 +21 +-2.5275 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68989 +20 +-2.5275 +11 +6.6904 +21 +-2.52822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6904 +20 +-2.52822 +11 +6.69045 +21 +-2.52827 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.69045 +20 +-2.52827 +11 +6.69232 +21 +-2.53202 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.69232 +20 +-2.53202 +11 +6.69261 +21 +-2.533 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.69261 +20 +-2.533 +11 +6.69257 +21 +-2.53317 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.69257 +20 +-2.53317 +11 +6.69263 +21 +-2.53334 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.69263 +20 +-2.53334 +11 +6.69263 +21 +-2.54271 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.69263 +20 +-2.54271 +11 +6.69246 +21 +-2.54372 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.69246 +20 +-2.54372 +11 +6.69234 +21 +-2.54386 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.69234 +20 +-2.54386 +11 +6.69232 +21 +-2.54403 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.69232 +20 +-2.54403 +11 +6.69045 +21 +-2.54778 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.69045 +20 +-2.54778 +11 +6.68992 +21 +-2.54849 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68992 +20 +-2.54849 +11 +6.68989 +21 +-2.54855 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68989 +20 +-2.54855 +11 +6.68802 +21 +-2.55042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68802 +20 +-2.55042 +11 +6.6873 +21 +-2.55093 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6873 +20 +-2.55093 +11 +6.68725 +21 +-2.55098 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68725 +20 +-2.55098 +11 +6.6835 +21 +-2.55285 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6835 +20 +-2.55285 +11 +6.68252 +21 +-2.55315 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68252 +20 +-2.55315 +11 +6.68235 +21 +-2.5531 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68235 +20 +-2.5531 +11 +6.68218 +21 +-2.55316 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68218 +20 +-2.55316 +11 +6.67281 +21 +-2.55316 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67281 +20 +-2.55316 +11 +6.6718 +21 +-2.55299 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6718 +20 +-2.55299 +11 +6.67166 +21 +-2.55287 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67166 +20 +-2.55287 +11 +6.67149 +21 +-2.55285 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67149 +20 +-2.55285 +11 +6.66774 +21 +-2.55098 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66774 +20 +-2.55098 +11 +6.66703 +21 +-2.55045 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66703 +20 +-2.55045 +11 +6.66697 +21 +-2.55042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66697 +20 +-2.55042 +11 +6.6651 +21 +-2.54855 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6651 +20 +-2.54855 +11 +6.66451 +21 +-2.54771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66451 +20 +-2.54771 +11 +6.66433 +21 +-2.5457 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66433 +20 +-2.5457 +11 +6.66549 +21 +-2.54404 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66549 +20 +-2.54404 +11 +6.66744 +21 +-2.54352 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66744 +20 +-2.54352 +11 +6.66927 +21 +-2.54437 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66927 +20 +-2.54437 +11 +6.67081 +21 +-2.54591 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67081 +20 +-2.54591 +11 +6.67351 +21 +-2.54726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67351 +20 +-2.54726 +11 +6.68149 +21 +-2.54726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68149 +20 +-2.54726 +11 +6.68418 +21 +-2.54591 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68418 +20 +-2.54591 +11 +6.68538 +21 +-2.54471 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68538 +20 +-2.54471 +11 +6.68673 +21 +-2.54202 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68673 +20 +-2.54202 +11 +6.68673 +21 +-2.53404 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68673 +20 +-2.53404 +11 +6.68538 +21 +-2.53134 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68538 +20 +-2.53134 +11 +6.68418 +21 +-2.53014 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68418 +20 +-2.53014 +11 +6.68149 +21 +-2.52879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68149 +20 +-2.52879 +11 +6.67351 +21 +-2.52879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67351 +20 +-2.52879 +11 +6.67081 +21 +-2.53014 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67081 +20 +-2.53014 +11 +6.66927 +21 +-2.53168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66927 +20 +-2.53168 +11 +6.66843 +21 +-2.53227 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66843 +20 +-2.53227 +11 +6.66841 +21 +-2.53227 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66841 +20 +-2.53227 +11 +6.6684 +21 +-2.53228 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6684 +20 +-2.53228 +11 +6.66741 +21 +-2.53236 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66741 +20 +-2.53236 +11 +6.66642 +21 +-2.53244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66642 +20 +-2.53244 +11 +6.6664 +21 +-2.53243 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6664 +20 +-2.53243 +11 +6.66638 +21 +-2.53243 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66638 +20 +-2.53243 +11 +6.66558 +21 +-2.53185 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66558 +20 +-2.53185 +11 +6.66477 +21 +-2.53128 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66477 +20 +-2.53128 +11 +6.66476 +21 +-2.53126 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66476 +20 +-2.53126 +11 +6.66474 +21 +-2.53125 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66474 +20 +-2.53125 +11 +6.6645 +21 +-2.53029 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6645 +20 +-2.53029 +11 +6.66424 +21 +-2.52933 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66424 +20 +-2.52933 +11 +6.66425 +21 +-2.52931 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66425 +20 +-2.52931 +11 +6.66425 +21 +-2.5293 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66425 +20 +-2.5293 +11 +6.66612 +21 +-2.51055 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66612 +20 +-2.51055 +11 +6.66616 +21 +-2.5104 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66616 +20 +-2.5104 +11 +6.66615 +21 +-2.51033 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66615 +20 +-2.51033 +11 +6.66621 +21 +-2.51022 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66621 +20 +-2.51022 +11 +6.6664 +21 +-2.50956 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6664 +20 +-2.50956 +11 +6.66685 +21 +-2.50912 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66685 +20 +-2.50912 +11 +6.66716 +21 +-2.50858 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66716 +20 +-2.50858 +11 +6.66755 +21 +-2.50844 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66755 +20 +-2.50844 +11 +6.66784 +21 +-2.50815 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66784 +20 +-2.50815 +11 +6.66847 +21 +-2.5081 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66847 +20 +-2.5081 +11 +6.66906 +21 +-2.50789 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66906 +20 +-2.50789 +11 +6.68781 +21 +-2.50789 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68781 +20 +-2.50789 +11 +6.68882 +21 +-2.50807 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64128 +20 +-2.50796 +11 +6.64145 +21 +-2.50793 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64145 +20 +-2.50793 +11 +6.64219 +21 +-2.50836 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64219 +20 +-2.50836 +11 +6.64298 +21 +-2.50871 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64298 +20 +-2.50871 +11 +6.64305 +21 +-2.50886 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64305 +20 +-2.50886 +11 +6.6432 +21 +-2.50894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6432 +20 +-2.50894 +11 +6.64349 +21 +-2.50975 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64349 +20 +-2.50975 +11 +6.64387 +21 +-2.51052 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64387 +20 +-2.51052 +11 +6.64383 +21 +-2.51068 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64383 +20 +-2.51068 +11 +6.64389 +21 +-2.51084 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64389 +20 +-2.51084 +11 +6.64389 +21 +-2.54726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64389 +20 +-2.54726 +11 +6.65219 +21 +-2.54726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65219 +20 +-2.54726 +11 +6.6532 +21 +-2.54744 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6532 +20 +-2.54744 +11 +6.65474 +21 +-2.54874 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65474 +20 +-2.54874 +11 +6.65509 +21 +-2.55072 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65509 +20 +-2.55072 +11 +6.65408 +21 +-2.55247 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65408 +20 +-2.55247 +11 +6.65219 +21 +-2.55316 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65219 +20 +-2.55316 +11 +6.62969 +21 +-2.55316 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62969 +20 +-2.55316 +11 +6.62868 +21 +-2.55299 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62868 +20 +-2.55299 +11 +6.62713 +21 +-2.55169 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62713 +20 +-2.55169 +11 +6.62678 +21 +-2.5497 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62678 +20 +-2.5497 +11 +6.62779 +21 +-2.54795 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62779 +20 +-2.54795 +11 +6.62969 +21 +-2.54726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62969 +20 +-2.54726 +11 +6.63798 +21 +-2.54726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63798 +20 +-2.54726 +11 +6.63798 +21 +-2.51985 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63798 +20 +-2.51985 +11 +6.63553 +21 +-2.5223 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63553 +20 +-2.5223 +11 +6.6348 +21 +-2.52281 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6348 +20 +-2.52281 +11 +6.63476 +21 +-2.52286 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63476 +20 +-2.52286 +11 +6.63101 +21 +-2.52473 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63101 +20 +-2.52473 +11 +6.63003 +21 +-2.52502 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63003 +20 +-2.52502 +11 +6.62806 +21 +-2.52455 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62806 +20 +-2.52455 +11 +6.62686 +21 +-2.52293 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62686 +20 +-2.52293 +11 +6.62698 +21 +-2.52092 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62698 +20 +-2.52092 +11 +6.62837 +21 +-2.51945 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62837 +20 +-2.51945 +11 +6.63169 +21 +-2.51779 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63169 +20 +-2.51779 +11 +6.63489 +21 +-2.51458 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63489 +20 +-2.51458 +11 +6.63848 +21 +-2.5092 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63848 +20 +-2.5092 +11 +6.63919 +21 +-2.50846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63919 +20 +-2.50846 +11 +6.63935 +21 +-2.50841 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63935 +20 +-2.50841 +11 +6.63946 +21 +-2.50828 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63946 +20 +-2.50828 +11 +6.6403 +21 +-2.50814 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6403 +20 +-2.50814 +11 +6.64113 +21 +-2.5079 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64113 +20 +-2.5079 +11 +6.64128 +21 +-2.50796 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59101 +20 +-2.49797 +11 +6.59256 +21 +-2.49927 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59256 +20 +-2.49927 +11 +6.59291 +21 +-2.50126 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59291 +20 +-2.50126 +11 +6.5919 +21 +-2.50301 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5919 +20 +-2.50301 +11 +6.59 +21 +-2.5037 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59 +20 +-2.5037 +11 +6.54122 +21 +-2.5037 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54122 +20 +-2.5037 +11 +6.50209 +21 +-2.54284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50209 +20 +-2.54284 +11 +6.50125 +21 +-2.54342 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50125 +20 +-2.54342 +11 +6.49924 +21 +-2.5436 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49924 +20 +-2.5436 +11 +6.49758 +21 +-2.54244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49758 +20 +-2.54244 +11 +6.49706 +21 +-2.54049 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49706 +20 +-2.54049 +11 +6.49791 +21 +-2.53866 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49791 +20 +-2.53866 +11 +6.53791 +21 +-2.49866 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53791 +20 +-2.49866 +11 +6.53806 +21 +-2.49855 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53806 +20 +-2.49855 +11 +6.5381 +21 +-2.49849 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5381 +20 +-2.49849 +11 +6.53822 +21 +-2.49844 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53822 +20 +-2.49844 +11 +6.53875 +21 +-2.49807 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53875 +20 +-2.49807 +11 +6.53939 +21 +-2.49802 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53939 +20 +-2.49802 +11 +6.54 +21 +-2.4978 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54 +20 +-2.4978 +11 +6.59 +21 +-2.4978 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59 +20 +-2.4978 +11 +6.59101 +21 +-2.49797 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60618 +20 +-2.45804 +11 +6.60625 +21 +-2.45804 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60625 +20 +-2.45804 +11 +6.61187 +21 +-2.45992 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61187 +20 +-2.45992 +11 +6.61277 +21 +-2.4604 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61277 +20 +-2.4604 +11 +6.61287 +21 +-2.46055 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61287 +20 +-2.46055 +11 +6.61303 +21 +-2.46063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61303 +20 +-2.46063 +11 +6.61678 +21 +-2.46438 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61678 +20 +-2.46438 +11 +6.61728 +21 +-2.4651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61728 +20 +-2.4651 +11 +6.61733 +21 +-2.46515 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61733 +20 +-2.46515 +11 +6.6192 +21 +-2.4689 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6192 +20 +-2.4689 +11 +6.61935 +21 +-2.46938 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61935 +20 +-2.46938 +11 +6.61943 +21 +-2.4695 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61943 +20 +-2.4695 +11 +6.6213 +21 +-2.477 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6213 +20 +-2.477 +11 +6.62134 +21 +-2.47759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62134 +20 +-2.47759 +11 +6.62139 +21 +-2.47771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62139 +20 +-2.47771 +11 +6.62139 +21 +-2.48334 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62139 +20 +-2.48334 +11 +6.62129 +21 +-2.48392 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62129 +20 +-2.48392 +11 +6.6213 +21 +-2.48406 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6213 +20 +-2.48406 +11 +6.61943 +21 +-2.49155 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61943 +20 +-2.49155 +11 +6.61922 +21 +-2.49202 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61922 +20 +-2.49202 +11 +6.6192 +21 +-2.49216 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6192 +20 +-2.49216 +11 +6.61733 +21 +-2.49591 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61733 +20 +-2.49591 +11 +6.6168 +21 +-2.49662 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6168 +20 +-2.49662 +11 +6.61678 +21 +-2.49668 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61678 +20 +-2.49668 +11 +6.61303 +21 +-2.50042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61303 +20 +-2.50042 +11 +6.61219 +21 +-2.50101 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61219 +20 +-2.50101 +11 +6.61201 +21 +-2.50103 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61201 +20 +-2.50103 +11 +6.61187 +21 +-2.50114 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61187 +20 +-2.50114 +11 +6.60625 +21 +-2.50301 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60625 +20 +-2.50301 +11 +6.60538 +21 +-2.50314 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60538 +20 +-2.50314 +11 +6.60531 +21 +-2.50316 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60531 +20 +-2.50316 +11 +6.59594 +21 +-2.50316 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59594 +20 +-2.50316 +11 +6.59556 +21 +-2.5031 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59556 +20 +-2.5031 +11 +6.59543 +21 +-2.50312 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59543 +20 +-2.50312 +11 +6.59531 +21 +-2.50305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59531 +20 +-2.50305 +11 +6.59493 +21 +-2.50299 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59493 +20 +-2.50299 +11 +6.59434 +21 +-2.50249 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59434 +20 +-2.50249 +11 +6.59368 +21 +-2.50211 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59368 +20 +-2.50211 +11 +6.59359 +21 +-2.50186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59359 +20 +-2.50186 +11 +6.59338 +21 +-2.50169 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59338 +20 +-2.50169 +11 +6.59325 +21 +-2.50093 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59325 +20 +-2.50093 +11 +6.59299 +21 +-2.50021 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59299 +20 +-2.50021 +11 +6.59299 +21 +-2.46084 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59299 +20 +-2.46084 +11 +6.59306 +21 +-2.46046 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59306 +20 +-2.46046 +11 +6.59303 +21 +-2.46033 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59303 +20 +-2.46033 +11 +6.5931 +21 +-2.46022 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5931 +20 +-2.46022 +11 +6.59317 +21 +-2.45983 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59317 +20 +-2.45983 +11 +6.59366 +21 +-2.45924 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59366 +20 +-2.45924 +11 +6.59404 +21 +-2.45858 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59404 +20 +-2.45858 +11 +6.59429 +21 +-2.45849 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59429 +20 +-2.45849 +11 +6.59446 +21 +-2.45828 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59446 +20 +-2.45828 +11 +6.59522 +21 +-2.45815 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59522 +20 +-2.45815 +11 +6.59594 +21 +-2.45789 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59594 +20 +-2.45789 +11 +6.60531 +21 +-2.45789 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60531 +20 +-2.45789 +11 +6.60618 +21 +-2.45804 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59889 +20 +-2.49726 +11 +6.60484 +21 +-2.49726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60484 +20 +-2.49726 +11 +6.60934 +21 +-2.49576 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60934 +20 +-2.49576 +11 +6.61226 +21 +-2.49284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61226 +20 +-2.49284 +11 +6.61378 +21 +-2.48981 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61378 +20 +-2.48981 +11 +6.61549 +21 +-2.48298 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61549 +20 +-2.48298 +11 +6.61549 +21 +-2.47808 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61549 +20 +-2.47808 +11 +6.61378 +21 +-2.47125 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61378 +20 +-2.47125 +11 +6.61226 +21 +-2.46822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61226 +20 +-2.46822 +11 +6.60934 +21 +-2.4653 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60934 +20 +-2.4653 +11 +6.60484 +21 +-2.46379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60484 +20 +-2.46379 +11 +6.59889 +21 +-2.46379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59889 +20 +-2.46379 +11 +6.59889 +21 +-2.49726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65882 +20 +-2.45807 +11 +6.65909 +21 +-2.45829 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65909 +20 +-2.45829 +11 +6.65943 +21 +-2.45837 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65943 +20 +-2.45837 +11 +6.65984 +21 +-2.45892 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65984 +20 +-2.45892 +11 +6.66037 +21 +-2.45937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66037 +20 +-2.45937 +11 +6.66043 +21 +-2.45971 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66043 +20 +-2.45971 +11 +6.66064 +21 +-2.45999 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66064 +20 +-2.45999 +11 +6.6606 +21 +-2.46068 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6606 +20 +-2.46068 +11 +6.66072 +21 +-2.46135 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66072 +20 +-2.46135 +11 +6.66054 +21 +-2.46166 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66054 +20 +-2.46166 +11 +6.66052 +21 +-2.462 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66052 +20 +-2.462 +11 +6.64365 +21 +-2.50137 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64365 +20 +-2.50137 +11 +6.64309 +21 +-2.50223 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64309 +20 +-2.50223 +11 +6.64129 +21 +-2.50314 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64129 +20 +-2.50314 +11 +6.63932 +21 +-2.50268 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63932 +20 +-2.50268 +11 +6.63811 +21 +-2.50107 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63811 +20 +-2.50107 +11 +6.63822 +21 +-2.49905 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63822 +20 +-2.49905 +11 +6.65333 +21 +-2.46379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65333 +20 +-2.46379 +11 +6.63156 +21 +-2.46379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63156 +20 +-2.46379 +11 +6.63055 +21 +-2.46362 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63055 +20 +-2.46362 +11 +6.629 +21 +-2.46232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.629 +20 +-2.46232 +11 +6.62865 +21 +-2.46033 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62865 +20 +-2.46033 +11 +6.62966 +21 +-2.45858 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62966 +20 +-2.45858 +11 +6.63156 +21 +-2.45789 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63156 +20 +-2.45789 +11 +6.65781 +21 +-2.45789 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65781 +20 +-2.45789 +11 +6.65882 +21 +-2.45807 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05968 +20 +-2.47939 +11 +6.06037 +21 +-2.48106 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06037 +20 +-2.48106 +11 +6.06037 +21 +-2.49894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06037 +20 +-2.49894 +11 +6.05968 +21 +-2.50061 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05968 +20 +-2.50061 +11 +6.05801 +21 +-2.5013 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05801 +20 +-2.5013 +11 +6.05634 +21 +-2.50061 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05634 +20 +-2.50061 +11 +6.05565 +21 +-2.49894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05565 +20 +-2.49894 +11 +6.05565 +21 +-2.48106 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05565 +20 +-2.48106 +11 +6.05634 +21 +-2.47939 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05634 +20 +-2.47939 +11 +6.05801 +21 +-2.4787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05801 +20 +-2.4787 +11 +6.05968 +21 +-2.47939 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00181 +20 +-2.47939 +11 +6.0025 +21 +-2.48106 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0025 +20 +-2.48106 +11 +6.0025 +21 +-2.49894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0025 +20 +-2.49894 +11 +6.00181 +21 +-2.50061 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00181 +20 +-2.50061 +11 +6.00014 +21 +-2.5013 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00014 +20 +-2.5013 +11 +5.99847 +21 +-2.50061 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99847 +20 +-2.50061 +11 +5.99778 +21 +-2.49894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99778 +20 +-2.49894 +11 +5.99778 +21 +-2.48106 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99778 +20 +-2.48106 +11 +5.99847 +21 +-2.47939 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99847 +20 +-2.47939 +11 +6.00014 +21 +-2.4787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.00014 +20 +-2.4787 +11 +6.00181 +21 +-2.47939 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40803 +20 +-2.49301 +11 +6.40872 +21 +-2.49469 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40872 +20 +-2.49469 +11 +6.40803 +21 +-2.49636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40803 +20 +-2.49636 +11 +6.40636 +21 +-2.49705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40636 +20 +-2.49705 +11 +6.38579 +21 +-2.49705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38579 +20 +-2.49705 +11 +6.38412 +21 +-2.49636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38412 +20 +-2.49636 +11 +6.38343 +21 +-2.49469 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38343 +20 +-2.49469 +11 +6.38412 +21 +-2.49301 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38412 +20 +-2.49301 +11 +6.38579 +21 +-2.49232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38579 +20 +-2.49232 +11 +6.40636 +21 +-2.49232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40636 +20 +-2.49232 +11 +6.40803 +21 +-2.49301 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61306 +20 +-2.40304 +11 +6.61313 +21 +-2.40304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61313 +20 +-2.40304 +11 +6.61875 +21 +-2.40492 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61875 +20 +-2.40492 +11 +6.61965 +21 +-2.4054 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61965 +20 +-2.4054 +11 +6.61974 +21 +-2.40555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61974 +20 +-2.40555 +11 +6.6199 +21 +-2.40563 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6199 +20 +-2.40563 +11 +6.62178 +21 +-2.4075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62178 +20 +-2.4075 +11 +6.62237 +21 +-2.40834 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62237 +20 +-2.40834 +11 +6.62254 +21 +-2.41036 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62254 +20 +-2.41036 +11 +6.62138 +21 +-2.41201 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62138 +20 +-2.41201 +11 +6.61943 +21 +-2.41253 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61943 +20 +-2.41253 +11 +6.6176 +21 +-2.41168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6176 +20 +-2.41168 +11 +6.61622 +21 +-2.4103 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61622 +20 +-2.4103 +11 +6.61171 +21 +-2.40879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61171 +20 +-2.40879 +11 +6.60892 +21 +-2.40879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60892 +20 +-2.40879 +11 +6.60441 +21 +-2.4103 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60441 +20 +-2.4103 +11 +6.60149 +21 +-2.41322 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60149 +20 +-2.41322 +11 +6.59998 +21 +-2.41625 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59998 +20 +-2.41625 +11 +6.59827 +21 +-2.42308 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59827 +20 +-2.42308 +11 +6.59827 +21 +-2.42798 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59827 +20 +-2.42798 +11 +6.59998 +21 +-2.43481 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59998 +20 +-2.43481 +11 +6.60149 +21 +-2.43784 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60149 +20 +-2.43784 +11 +6.60441 +21 +-2.44076 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60441 +20 +-2.44076 +11 +6.60892 +21 +-2.44226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60892 +20 +-2.44226 +11 +6.61171 +21 +-2.44226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61171 +20 +-2.44226 +11 +6.61622 +21 +-2.44076 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61622 +20 +-2.44076 +11 +6.6176 +21 +-2.43937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6176 +20 +-2.43937 +11 +6.61844 +21 +-2.43879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61844 +20 +-2.43879 +11 +6.62045 +21 +-2.43861 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62045 +20 +-2.43861 +11 +6.62211 +21 +-2.43977 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62211 +20 +-2.43977 +11 +6.62263 +21 +-2.44172 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62263 +20 +-2.44172 +11 +6.62178 +21 +-2.44355 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62178 +20 +-2.44355 +11 +6.6199 +21 +-2.44542 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6199 +20 +-2.44542 +11 +6.61906 +21 +-2.44601 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61906 +20 +-2.44601 +11 +6.61889 +21 +-2.44603 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61889 +20 +-2.44603 +11 +6.61875 +21 +-2.44614 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61875 +20 +-2.44614 +11 +6.61313 +21 +-2.44801 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61313 +20 +-2.44801 +11 +6.61225 +21 +-2.44814 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61225 +20 +-2.44814 +11 +6.61219 +21 +-2.44816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61219 +20 +-2.44816 +11 +6.60844 +21 +-2.44816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60844 +20 +-2.44816 +11 +6.60757 +21 +-2.44801 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60757 +20 +-2.44801 +11 +6.60751 +21 +-2.44801 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60751 +20 +-2.44801 +11 +6.60188 +21 +-2.44614 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60188 +20 +-2.44614 +11 +6.60098 +21 +-2.44565 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60098 +20 +-2.44565 +11 +6.60089 +21 +-2.4455 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60089 +20 +-2.4455 +11 +6.60073 +21 +-2.44542 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60073 +20 +-2.44542 +11 +6.59698 +21 +-2.44168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59698 +20 +-2.44168 +11 +6.59647 +21 +-2.44095 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59647 +20 +-2.44095 +11 +6.59643 +21 +-2.44091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59643 +20 +-2.44091 +11 +6.59455 +21 +-2.43716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59455 +20 +-2.43716 +11 +6.59441 +21 +-2.43667 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59441 +20 +-2.43667 +11 +6.59433 +21 +-2.43655 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59433 +20 +-2.43655 +11 +6.59414 +21 +-2.43579 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59414 +20 +-2.43579 +11 +6.58295 +21 +-2.44697 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58295 +20 +-2.44697 +11 +6.58295 +21 +-2.47075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58295 +20 +-2.47075 +11 +6.58292 +21 +-2.47093 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58292 +20 +-2.47093 +11 +6.58294 +21 +-2.47101 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58294 +20 +-2.47101 +11 +6.58289 +21 +-2.47112 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58289 +20 +-2.47112 +11 +6.58277 +21 +-2.47176 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58277 +20 +-2.47176 +11 +6.58236 +21 +-2.47225 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58236 +20 +-2.47225 +11 +6.58209 +21 +-2.47284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58209 +20 +-2.47284 +11 +6.56209 +21 +-2.49284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56209 +20 +-2.49284 +11 +6.56194 +21 +-2.49294 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56194 +20 +-2.49294 +11 +6.5619 +21 +-2.49301 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5619 +20 +-2.49301 +11 +6.56178 +21 +-2.49305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56178 +20 +-2.49305 +11 +6.56125 +21 +-2.49342 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56125 +20 +-2.49342 +11 +6.56061 +21 +-2.49348 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56061 +20 +-2.49348 +11 +6.56 +21 +-2.4937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56 +20 +-2.4937 +11 +6.465 +21 +-2.4937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.465 +20 +-2.4937 +11 +6.46399 +21 +-2.49352 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46399 +20 +-2.49352 +11 +6.46244 +21 +-2.49222 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46244 +20 +-2.49222 +11 +6.46209 +21 +-2.49024 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.46209 +20 +-2.49024 +11 +6.4631 +21 +-2.48849 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4631 +20 +-2.48849 +11 +6.465 +21 +-2.4878 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.465 +20 +-2.4878 +11 +6.55878 +21 +-2.4878 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55878 +20 +-2.4878 +11 +6.57705 +21 +-2.46952 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57705 +20 +-2.46952 +11 +6.57705 +21 +-2.44575 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57705 +20 +-2.44575 +11 +6.57708 +21 +-2.44557 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57708 +20 +-2.44557 +11 +6.57706 +21 +-2.44549 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57706 +20 +-2.44549 +11 +6.57711 +21 +-2.44537 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57711 +20 +-2.44537 +11 +6.57723 +21 +-2.44474 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57723 +20 +-2.44474 +11 +6.57764 +21 +-2.44424 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57764 +20 +-2.44424 +11 +6.57791 +21 +-2.44366 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57791 +20 +-2.44366 +11 +6.59247 +21 +-2.42911 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59247 +20 +-2.42911 +11 +6.59245 +21 +-2.42906 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59245 +20 +-2.42906 +11 +6.59241 +21 +-2.42847 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59241 +20 +-2.42847 +11 +6.59237 +21 +-2.42834 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59237 +20 +-2.42834 +11 +6.59237 +21 +-2.42271 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59237 +20 +-2.42271 +11 +6.59247 +21 +-2.42213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59247 +20 +-2.42213 +11 +6.59245 +21 +-2.422 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59245 +20 +-2.422 +11 +6.59433 +21 +-2.4145 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59433 +20 +-2.4145 +11 +6.59454 +21 +-2.41403 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59454 +20 +-2.41403 +11 +6.59455 +21 +-2.4139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59455 +20 +-2.4139 +11 +6.59643 +21 +-2.41015 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59643 +20 +-2.41015 +11 +6.59695 +21 +-2.40944 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59695 +20 +-2.40944 +11 +6.59698 +21 +-2.40938 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59698 +20 +-2.40938 +11 +6.60073 +21 +-2.40563 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60073 +20 +-2.40563 +11 +6.60157 +21 +-2.40504 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60157 +20 +-2.40504 +11 +6.60175 +21 +-2.40502 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60175 +20 +-2.40502 +11 +6.60188 +21 +-2.40492 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60188 +20 +-2.40492 +11 +6.60751 +21 +-2.40304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60751 +20 +-2.40304 +11 +6.60838 +21 +-2.40291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60838 +20 +-2.40291 +11 +6.60844 +21 +-2.40289 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60844 +20 +-2.40289 +11 +6.61219 +21 +-2.40289 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61219 +20 +-2.40289 +11 +6.61306 +21 +-2.40304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31668 +20 +-2.46954 +11 +6.31737 +21 +-2.47121 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31737 +20 +-2.47121 +11 +6.31737 +21 +-2.48909 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31737 +20 +-2.48909 +11 +6.31668 +21 +-2.49076 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31668 +20 +-2.49076 +11 +6.31501 +21 +-2.49145 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31501 +20 +-2.49145 +11 +6.31334 +21 +-2.49076 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31334 +20 +-2.49076 +11 +6.31265 +21 +-2.48909 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31265 +20 +-2.48909 +11 +6.31265 +21 +-2.47121 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31265 +20 +-2.47121 +11 +6.31334 +21 +-2.46954 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31334 +20 +-2.46954 +11 +6.31501 +21 +-2.46885 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31501 +20 +-2.46885 +11 +6.31668 +21 +-2.46954 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25881 +20 +-2.46954 +11 +6.2595 +21 +-2.47121 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2595 +20 +-2.47121 +11 +6.2595 +21 +-2.48909 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2595 +20 +-2.48909 +11 +6.25881 +21 +-2.49076 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25881 +20 +-2.49076 +11 +6.25714 +21 +-2.49145 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25714 +20 +-2.49145 +11 +6.25547 +21 +-2.49076 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25547 +20 +-2.49076 +11 +6.25478 +21 +-2.48909 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25478 +20 +-2.48909 +11 +6.25478 +21 +-2.47121 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25478 +20 +-2.47121 +11 +6.25547 +21 +-2.46954 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25547 +20 +-2.46954 +11 +6.25714 +21 +-2.46885 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25714 +20 +-2.46885 +11 +6.25881 +21 +-2.46954 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65944 +20 +-2.44232 +11 +5.65958 +21 +-2.44243 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65958 +20 +-2.44243 +11 +5.65976 +21 +-2.44245 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65976 +20 +-2.44245 +11 +5.6635 +21 +-2.44433 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6635 +20 +-2.44433 +11 +5.66421 +21 +-2.44485 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66421 +20 +-2.44485 +11 +5.66427 +21 +-2.44488 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66427 +20 +-2.44488 +11 +5.66615 +21 +-2.44676 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66615 +20 +-2.44676 +11 +5.66665 +21 +-2.44748 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66665 +20 +-2.44748 +11 +5.6667 +21 +-2.44752 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6667 +20 +-2.44752 +11 +5.66857 +21 +-2.45127 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66857 +20 +-2.45127 +11 +5.66887 +21 +-2.45226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66887 +20 +-2.45226 +11 +5.66883 +21 +-2.45243 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66883 +20 +-2.45243 +11 +5.66889 +21 +-2.45259 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66889 +20 +-2.45259 +11 +5.66889 +21 +-2.45447 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66889 +20 +-2.45447 +11 +5.66871 +21 +-2.45548 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66871 +20 +-2.45548 +11 +5.66859 +21 +-2.45561 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66859 +20 +-2.45561 +11 +5.66857 +21 +-2.45579 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66857 +20 +-2.45579 +11 +5.6667 +21 +-2.45954 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6667 +20 +-2.45954 +11 +5.66617 +21 +-2.46025 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66617 +20 +-2.46025 +11 +5.66615 +21 +-2.4603 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66615 +20 +-2.4603 +11 +5.66449 +21 +-2.46197 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66449 +20 +-2.46197 +11 +5.66615 +21 +-2.46363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66615 +20 +-2.46363 +11 +5.66665 +21 +-2.46435 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66665 +20 +-2.46435 +11 +5.6667 +21 +-2.4644 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6667 +20 +-2.4644 +11 +5.66857 +21 +-2.46815 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66857 +20 +-2.46815 +11 +5.66887 +21 +-2.46913 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66887 +20 +-2.46913 +11 +5.66883 +21 +-2.4693 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66883 +20 +-2.4693 +11 +5.66889 +21 +-2.46947 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66889 +20 +-2.46947 +11 +5.66889 +21 +-2.47696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66889 +20 +-2.47696 +11 +5.66871 +21 +-2.47797 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66871 +20 +-2.47797 +11 +5.66859 +21 +-2.47811 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66859 +20 +-2.47811 +11 +5.66857 +21 +-2.47829 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66857 +20 +-2.47829 +11 +5.6667 +21 +-2.48203 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6667 +20 +-2.48203 +11 +5.66617 +21 +-2.48274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66617 +20 +-2.48274 +11 +5.66615 +21 +-2.4828 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66615 +20 +-2.4828 +11 +5.66427 +21 +-2.48468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66427 +20 +-2.48468 +11 +5.66355 +21 +-2.48518 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66355 +20 +-2.48518 +11 +5.6635 +21 +-2.48523 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6635 +20 +-2.48523 +11 +5.65976 +21 +-2.4871 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65976 +20 +-2.4871 +11 +5.65877 +21 +-2.4874 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65877 +20 +-2.4874 +11 +5.6586 +21 +-2.48736 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6586 +20 +-2.48736 +11 +5.65843 +21 +-2.48742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65843 +20 +-2.48742 +11 +5.65094 +21 +-2.48742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65094 +20 +-2.48742 +11 +5.64993 +21 +-2.48724 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64993 +20 +-2.48724 +11 +5.64979 +21 +-2.48712 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64979 +20 +-2.48712 +11 +5.64961 +21 +-2.4871 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64961 +20 +-2.4871 +11 +5.64587 +21 +-2.48523 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64587 +20 +-2.48523 +11 +5.64516 +21 +-2.4847 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64516 +20 +-2.4847 +11 +5.6451 +21 +-2.48468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6451 +20 +-2.48468 +11 +5.64322 +21 +-2.4828 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64322 +20 +-2.4828 +11 +5.64272 +21 +-2.48208 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64272 +20 +-2.48208 +11 +5.64267 +21 +-2.48203 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64267 +20 +-2.48203 +11 +5.6408 +21 +-2.47829 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6408 +20 +-2.47829 +11 +5.6405 +21 +-2.4773 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6405 +20 +-2.4773 +11 +5.64054 +21 +-2.47713 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64054 +20 +-2.47713 +11 +5.64048 +21 +-2.47696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64048 +20 +-2.47696 +11 +5.64048 +21 +-2.46947 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64048 +20 +-2.46947 +11 +5.64066 +21 +-2.46846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64066 +20 +-2.46846 +11 +5.64078 +21 +-2.46832 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64078 +20 +-2.46832 +11 +5.6408 +21 +-2.46815 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6408 +20 +-2.46815 +11 +5.64267 +21 +-2.4644 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64267 +20 +-2.4644 +11 +5.6432 +21 +-2.46369 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6432 +20 +-2.46369 +11 +5.64322 +21 +-2.46363 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64322 +20 +-2.46363 +11 +5.64488 +21 +-2.46197 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64488 +20 +-2.46197 +11 +5.64322 +21 +-2.4603 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64322 +20 +-2.4603 +11 +5.64272 +21 +-2.45958 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64272 +20 +-2.45958 +11 +5.64267 +21 +-2.45954 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64267 +20 +-2.45954 +11 +5.6408 +21 +-2.45579 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6408 +20 +-2.45579 +11 +5.6405 +21 +-2.45481 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6405 +20 +-2.45481 +11 +5.64054 +21 +-2.45463 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64054 +20 +-2.45463 +11 +5.64048 +21 +-2.45447 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64048 +20 +-2.45447 +11 +5.64048 +21 +-2.45259 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64048 +20 +-2.45259 +11 +5.64066 +21 +-2.45158 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64066 +20 +-2.45158 +11 +5.64078 +21 +-2.45145 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64078 +20 +-2.45145 +11 +5.6408 +21 +-2.45127 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6408 +20 +-2.45127 +11 +5.64267 +21 +-2.44752 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64267 +20 +-2.44752 +11 +5.6432 +21 +-2.44681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6432 +20 +-2.44681 +11 +5.64322 +21 +-2.44676 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64322 +20 +-2.44676 +11 +5.6451 +21 +-2.44488 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6451 +20 +-2.44488 +11 +5.64582 +21 +-2.44437 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64582 +20 +-2.44437 +11 +5.64587 +21 +-2.44433 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64587 +20 +-2.44433 +11 +5.64961 +21 +-2.44245 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64961 +20 +-2.44245 +11 +5.6506 +21 +-2.44216 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6506 +20 +-2.44216 +11 +5.65077 +21 +-2.4422 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65077 +20 +-2.4422 +11 +5.65094 +21 +-2.44214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65094 +20 +-2.44214 +11 +5.65843 +21 +-2.44214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65843 +20 +-2.44214 +11 +5.65944 +21 +-2.44232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64894 +20 +-2.46627 +11 +5.64774 +21 +-2.46747 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64774 +20 +-2.46747 +11 +5.64639 +21 +-2.47016 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64639 +20 +-2.47016 +11 +5.64639 +21 +-2.47627 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64639 +20 +-2.47627 +11 +5.64774 +21 +-2.47897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64774 +20 +-2.47897 +11 +5.64894 +21 +-2.48016 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64894 +20 +-2.48016 +11 +5.65163 +21 +-2.48151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65163 +20 +-2.48151 +11 +5.65774 +21 +-2.48151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65774 +20 +-2.48151 +11 +5.66043 +21 +-2.48016 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66043 +20 +-2.48016 +11 +5.66163 +21 +-2.47897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66163 +20 +-2.47897 +11 +5.66298 +21 +-2.47627 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66298 +20 +-2.47627 +11 +5.66298 +21 +-2.47016 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66298 +20 +-2.47016 +11 +5.66163 +21 +-2.46747 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66163 +20 +-2.46747 +11 +5.66043 +21 +-2.46627 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66043 +20 +-2.46627 +11 +5.65774 +21 +-2.46492 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65774 +20 +-2.46492 +11 +5.65163 +21 +-2.46492 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65163 +20 +-2.46492 +11 +5.64894 +21 +-2.46627 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64894 +20 +-2.4494 +11 +5.64774 +21 +-2.45059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64774 +20 +-2.45059 +11 +5.64639 +21 +-2.45329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64639 +20 +-2.45329 +11 +5.64639 +21 +-2.45377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64639 +20 +-2.45377 +11 +5.64774 +21 +-2.45647 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64774 +20 +-2.45647 +11 +5.64894 +21 +-2.45767 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.64894 +20 +-2.45767 +11 +5.65163 +21 +-2.45901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65163 +20 +-2.45901 +11 +5.65774 +21 +-2.45901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65774 +20 +-2.45901 +11 +5.66043 +21 +-2.45767 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66043 +20 +-2.45767 +11 +5.66163 +21 +-2.45647 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66163 +20 +-2.45647 +11 +5.66298 +21 +-2.45377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66298 +20 +-2.45377 +11 +5.66298 +21 +-2.45329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66298 +20 +-2.45329 +11 +5.66163 +21 +-2.45059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66163 +20 +-2.45059 +11 +5.66043 +21 +-2.4494 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.66043 +20 +-2.4494 +11 +5.65774 +21 +-2.44805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65774 +20 +-2.44805 +11 +5.65163 +21 +-2.44805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.65163 +20 +-2.44805 +11 +5.64894 +21 +-2.4494 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62181 +20 +-2.44229 +11 +5.62187 +21 +-2.44229 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62187 +20 +-2.44229 +11 +5.6275 +21 +-2.44417 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6275 +20 +-2.44417 +11 +5.6284 +21 +-2.44466 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6284 +20 +-2.44466 +11 +5.62849 +21 +-2.44481 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62849 +20 +-2.44481 +11 +5.62865 +21 +-2.44488 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62865 +20 +-2.44488 +11 +5.63053 +21 +-2.44676 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63053 +20 +-2.44676 +11 +5.63111 +21 +-2.4476 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63111 +20 +-2.4476 +11 +5.63129 +21 +-2.44961 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63129 +20 +-2.44961 +11 +5.63013 +21 +-2.45126 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63013 +20 +-2.45126 +11 +5.62818 +21 +-2.45178 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62818 +20 +-2.45178 +11 +5.62635 +21 +-2.45093 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62635 +20 +-2.45093 +11 +5.62497 +21 +-2.44955 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62497 +20 +-2.44955 +11 +5.62046 +21 +-2.44805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62046 +20 +-2.44805 +11 +5.61767 +21 +-2.44805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61767 +20 +-2.44805 +11 +5.61316 +21 +-2.44955 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61316 +20 +-2.44955 +11 +5.61024 +21 +-2.45247 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61024 +20 +-2.45247 +11 +5.60873 +21 +-2.4555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60873 +20 +-2.4555 +11 +5.60702 +21 +-2.46233 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60702 +20 +-2.46233 +11 +5.60702 +21 +-2.46723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60702 +20 +-2.46723 +11 +5.60873 +21 +-2.47406 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60873 +20 +-2.47406 +11 +5.61024 +21 +-2.47709 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61024 +20 +-2.47709 +11 +5.61316 +21 +-2.48001 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61316 +20 +-2.48001 +11 +5.61767 +21 +-2.48151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61767 +20 +-2.48151 +11 +5.62046 +21 +-2.48151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62046 +20 +-2.48151 +11 +5.62497 +21 +-2.48001 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62497 +20 +-2.48001 +11 +5.62635 +21 +-2.47863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62635 +20 +-2.47863 +11 +5.62719 +21 +-2.47804 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62719 +20 +-2.47804 +11 +5.6292 +21 +-2.47786 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6292 +20 +-2.47786 +11 +5.63086 +21 +-2.47902 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63086 +20 +-2.47902 +11 +5.63138 +21 +-2.48097 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63138 +20 +-2.48097 +11 +5.63053 +21 +-2.4828 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.63053 +20 +-2.4828 +11 +5.62865 +21 +-2.48468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62865 +20 +-2.48468 +11 +5.62781 +21 +-2.48527 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62781 +20 +-2.48527 +11 +5.62764 +21 +-2.48528 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62764 +20 +-2.48528 +11 +5.6275 +21 +-2.48539 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6275 +20 +-2.48539 +11 +5.62187 +21 +-2.48726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62187 +20 +-2.48726 +11 +5.621 +21 +-2.48739 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.621 +20 +-2.48739 +11 +5.62094 +21 +-2.48742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62094 +20 +-2.48742 +11 +5.61719 +21 +-2.48742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61719 +20 +-2.48742 +11 +5.61632 +21 +-2.48726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61632 +20 +-2.48726 +11 +5.61626 +21 +-2.48726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61626 +20 +-2.48726 +11 +5.61063 +21 +-2.48539 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61063 +20 +-2.48539 +11 +5.60973 +21 +-2.4849 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60973 +20 +-2.4849 +11 +5.60964 +21 +-2.48475 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60964 +20 +-2.48475 +11 +5.60948 +21 +-2.48468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60948 +20 +-2.48468 +11 +5.60573 +21 +-2.48093 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60573 +20 +-2.48093 +11 +5.60522 +21 +-2.4802 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60522 +20 +-2.4802 +11 +5.60517 +21 +-2.48016 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60517 +20 +-2.48016 +11 +5.6033 +21 +-2.47641 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6033 +20 +-2.47641 +11 +5.60315 +21 +-2.47592 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60315 +20 +-2.47592 +11 +5.60308 +21 +-2.47581 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60308 +20 +-2.47581 +11 +5.6012 +21 +-2.46831 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6012 +20 +-2.46831 +11 +5.60116 +21 +-2.46772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60116 +20 +-2.46772 +11 +5.60111 +21 +-2.46759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60111 +20 +-2.46759 +11 +5.60111 +21 +-2.46197 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60111 +20 +-2.46197 +11 +5.60122 +21 +-2.46139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60122 +20 +-2.46139 +11 +5.6012 +21 +-2.46125 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6012 +20 +-2.46125 +11 +5.60308 +21 +-2.45375 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60308 +20 +-2.45375 +11 +5.60328 +21 +-2.45329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60328 +20 +-2.45329 +11 +5.6033 +21 +-2.45315 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6033 +20 +-2.45315 +11 +5.60517 +21 +-2.4494 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60517 +20 +-2.4494 +11 +5.6057 +21 +-2.44869 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.6057 +20 +-2.44869 +11 +5.60573 +21 +-2.44863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60573 +20 +-2.44863 +11 +5.60948 +21 +-2.44488 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.60948 +20 +-2.44488 +11 +5.61032 +21 +-2.44429 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61032 +20 +-2.44429 +11 +5.61049 +21 +-2.44428 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61049 +20 +-2.44428 +11 +5.61063 +21 +-2.44417 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61063 +20 +-2.44417 +11 +5.61626 +21 +-2.44229 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61626 +20 +-2.44229 +11 +5.61713 +21 +-2.44216 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61713 +20 +-2.44216 +11 +5.61719 +21 +-2.44214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.61719 +20 +-2.44214 +11 +5.62094 +21 +-2.44214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.62094 +20 +-2.44214 +11 +5.62181 +21 +-2.44229 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74269 +20 +-2.45804 +11 +5.74339 +21 +-2.45971 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74339 +20 +-2.45971 +11 +5.74339 +21 +-2.48029 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74339 +20 +-2.48029 +11 +5.74269 +21 +-2.48196 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74269 +20 +-2.48196 +11 +5.74102 +21 +-2.48265 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74102 +20 +-2.48265 +11 +5.73935 +21 +-2.48196 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73935 +20 +-2.48196 +11 +5.73866 +21 +-2.48029 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73866 +20 +-2.48029 +11 +5.73866 +21 +-2.45971 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73866 +20 +-2.45971 +11 +5.73935 +21 +-2.45804 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73935 +20 +-2.45804 +11 +5.74102 +21 +-2.45735 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74102 +20 +-2.45735 +11 +5.74269 +21 +-2.45804 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68482 +20 +-2.45804 +11 +5.68551 +21 +-2.45971 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68551 +20 +-2.45971 +11 +5.68551 +21 +-2.48029 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68551 +20 +-2.48029 +11 +5.68482 +21 +-2.48196 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68482 +20 +-2.48196 +11 +5.68315 +21 +-2.48265 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68315 +20 +-2.48265 +11 +5.68148 +21 +-2.48196 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68148 +20 +-2.48196 +11 +5.68079 +21 +-2.48029 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68079 +20 +-2.48029 +11 +5.68079 +21 +-2.45971 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68079 +20 +-2.45971 +11 +5.68148 +21 +-2.45804 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68148 +20 +-2.45804 +11 +5.68315 +21 +-2.45735 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.68315 +20 +-2.45735 +11 +5.68482 +21 +-2.45804 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64628 +20 +-2.40296 +11 +6.64645 +21 +-2.40293 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64645 +20 +-2.40293 +11 +6.64719 +21 +-2.40336 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64719 +20 +-2.40336 +11 +6.64798 +21 +-2.40371 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64798 +20 +-2.40371 +11 +6.64805 +21 +-2.40386 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64805 +20 +-2.40386 +11 +6.6482 +21 +-2.40394 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6482 +20 +-2.40394 +11 +6.64849 +21 +-2.40475 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64849 +20 +-2.40475 +11 +6.64887 +21 +-2.40552 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64887 +20 +-2.40552 +11 +6.64883 +21 +-2.40568 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64883 +20 +-2.40568 +11 +6.64889 +21 +-2.40584 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64889 +20 +-2.40584 +11 +6.64889 +21 +-2.44226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64889 +20 +-2.44226 +11 +6.65719 +21 +-2.44226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65719 +20 +-2.44226 +11 +6.6582 +21 +-2.44244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6582 +20 +-2.44244 +11 +6.65974 +21 +-2.44374 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65974 +20 +-2.44374 +11 +6.66009 +21 +-2.44572 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66009 +20 +-2.44572 +11 +6.65908 +21 +-2.44747 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65908 +20 +-2.44747 +11 +6.65719 +21 +-2.44816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65719 +20 +-2.44816 +11 +6.63469 +21 +-2.44816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63469 +20 +-2.44816 +11 +6.63368 +21 +-2.44799 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63368 +20 +-2.44799 +11 +6.63213 +21 +-2.44669 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63213 +20 +-2.44669 +11 +6.63178 +21 +-2.4447 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63178 +20 +-2.4447 +11 +6.63279 +21 +-2.44295 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63279 +20 +-2.44295 +11 +6.63469 +21 +-2.44226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63469 +20 +-2.44226 +11 +6.64298 +21 +-2.44226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64298 +20 +-2.44226 +11 +6.64298 +21 +-2.41485 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64298 +20 +-2.41485 +11 +6.64053 +21 +-2.4173 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64053 +20 +-2.4173 +11 +6.6398 +21 +-2.41781 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6398 +20 +-2.41781 +11 +6.63976 +21 +-2.41786 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63976 +20 +-2.41786 +11 +6.63601 +21 +-2.41973 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63601 +20 +-2.41973 +11 +6.63503 +21 +-2.42002 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63503 +20 +-2.42002 +11 +6.63306 +21 +-2.41955 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63306 +20 +-2.41955 +11 +6.63186 +21 +-2.41793 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63186 +20 +-2.41793 +11 +6.63198 +21 +-2.41592 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63198 +20 +-2.41592 +11 +6.63337 +21 +-2.41445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63337 +20 +-2.41445 +11 +6.63669 +21 +-2.41279 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63669 +20 +-2.41279 +11 +6.63989 +21 +-2.40958 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63989 +20 +-2.40958 +11 +6.64348 +21 +-2.4042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64348 +20 +-2.4042 +11 +6.64419 +21 +-2.40346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64419 +20 +-2.40346 +11 +6.64435 +21 +-2.40341 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64435 +20 +-2.40341 +11 +6.64446 +21 +-2.40328 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64446 +20 +-2.40328 +11 +6.6453 +21 +-2.40314 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6453 +20 +-2.40314 +11 +6.64613 +21 +-2.4029 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64613 +20 +-2.4029 +11 +6.64628 +21 +-2.40296 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.69757 +20 +-2.40307 +11 +6.69783 +21 +-2.40329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.69783 +20 +-2.40329 +11 +6.69817 +21 +-2.40337 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.69817 +20 +-2.40337 +11 +6.69859 +21 +-2.40392 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.69859 +20 +-2.40392 +11 +6.69911 +21 +-2.40437 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.69911 +20 +-2.40437 +11 +6.69917 +21 +-2.40471 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.69917 +20 +-2.40471 +11 +6.69938 +21 +-2.40499 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.69938 +20 +-2.40499 +11 +6.69934 +21 +-2.40568 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.69934 +20 +-2.40568 +11 +6.69946 +21 +-2.40635 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.69946 +20 +-2.40635 +11 +6.69929 +21 +-2.40666 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.69929 +20 +-2.40666 +11 +6.69927 +21 +-2.407 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.69927 +20 +-2.407 +11 +6.6824 +21 +-2.44637 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6824 +20 +-2.44637 +11 +6.68184 +21 +-2.44723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68184 +20 +-2.44723 +11 +6.68003 +21 +-2.44814 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68003 +20 +-2.44814 +11 +6.67807 +21 +-2.44768 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67807 +20 +-2.44768 +11 +6.67686 +21 +-2.44607 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67686 +20 +-2.44607 +11 +6.67697 +21 +-2.44405 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67697 +20 +-2.44405 +11 +6.69208 +21 +-2.40879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.69208 +20 +-2.40879 +11 +6.67031 +21 +-2.40879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67031 +20 +-2.40879 +11 +6.6693 +21 +-2.40862 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6693 +20 +-2.40862 +11 +6.66775 +21 +-2.40732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66775 +20 +-2.40732 +11 +6.6674 +21 +-2.40533 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6674 +20 +-2.40533 +11 +6.66841 +21 +-2.40358 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66841 +20 +-2.40358 +11 +6.67031 +21 +-2.40289 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67031 +20 +-2.40289 +11 +6.69656 +21 +-2.40289 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.69656 +20 +-2.40289 +11 +6.69757 +21 +-2.40307 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40803 +20 +-2.43514 +11 +6.40872 +21 +-2.43681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40872 +20 +-2.43681 +11 +6.40803 +21 +-2.43848 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40803 +20 +-2.43848 +11 +6.40636 +21 +-2.43917 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40636 +20 +-2.43917 +11 +6.38579 +21 +-2.43917 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38579 +20 +-2.43917 +11 +6.38412 +21 +-2.43848 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38412 +20 +-2.43848 +11 +6.38343 +21 +-2.43681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38343 +20 +-2.43681 +11 +6.38412 +21 +-2.43514 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38412 +20 +-2.43514 +11 +6.38579 +21 +-2.43445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38579 +20 +-2.43445 +11 +6.40636 +21 +-2.43445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40636 +20 +-2.43445 +11 +6.40803 +21 +-2.43514 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55061 +20 +-2.40879 +11 +6.5513 +21 +-2.41046 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5513 +20 +-2.41046 +11 +6.5513 +21 +-2.43103 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5513 +20 +-2.43103 +11 +6.55061 +21 +-2.4327 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55061 +20 +-2.4327 +11 +6.54894 +21 +-2.4334 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54894 +20 +-2.4334 +11 +6.54727 +21 +-2.4327 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54727 +20 +-2.4327 +11 +6.54657 +21 +-2.43103 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54657 +20 +-2.43103 +11 +6.54657 +21 +-2.41046 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54657 +20 +-2.41046 +11 +6.54727 +21 +-2.40879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54727 +20 +-2.40879 +11 +6.54894 +21 +-2.4081 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54894 +20 +-2.4081 +11 +6.55061 +21 +-2.40879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49273 +20 +-2.40879 +11 +6.49343 +21 +-2.41046 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49343 +20 +-2.41046 +11 +6.49343 +21 +-2.43103 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49343 +20 +-2.43103 +11 +6.49273 +21 +-2.4327 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49273 +20 +-2.4327 +11 +6.49106 +21 +-2.4334 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49106 +20 +-2.4334 +11 +6.48939 +21 +-2.4327 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48939 +20 +-2.4327 +11 +6.4887 +21 +-2.43103 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4887 +20 +-2.43103 +11 +6.4887 +21 +-2.41046 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4887 +20 +-2.41046 +11 +6.48939 +21 +-2.40879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48939 +20 +-2.40879 +11 +6.49106 +21 +-2.4081 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49106 +20 +-2.4081 +11 +6.49273 +21 +-2.40879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12319 +20 +-2.38232 +11 +6.12333 +21 +-2.38243 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12333 +20 +-2.38243 +11 +6.1235 +21 +-2.38245 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1235 +20 +-2.38245 +11 +6.12725 +21 +-2.38433 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12725 +20 +-2.38433 +11 +6.12796 +21 +-2.38485 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12796 +20 +-2.38485 +11 +6.12802 +21 +-2.38488 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12802 +20 +-2.38488 +11 +6.12989 +21 +-2.38676 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12989 +20 +-2.38676 +11 +6.1304 +21 +-2.38748 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1304 +20 +-2.38748 +11 +6.13045 +21 +-2.38752 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13045 +20 +-2.38752 +11 +6.13232 +21 +-2.39127 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13232 +20 +-2.39127 +11 +6.13261 +21 +-2.39226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13261 +20 +-2.39226 +11 +6.13257 +21 +-2.39243 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13257 +20 +-2.39243 +11 +6.13263 +21 +-2.39259 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13263 +20 +-2.39259 +11 +6.13263 +21 +-2.39634 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13263 +20 +-2.39634 +11 +6.13248 +21 +-2.39721 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13248 +20 +-2.39721 +11 +6.13248 +21 +-2.39728 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13248 +20 +-2.39728 +11 +6.13061 +21 +-2.4029 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13061 +20 +-2.4029 +11 +6.13012 +21 +-2.4038 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13012 +20 +-2.4038 +11 +6.12997 +21 +-2.40389 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12997 +20 +-2.40389 +11 +6.12989 +21 +-2.40405 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12989 +20 +-2.40405 +11 +6.11244 +21 +-2.42151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11244 +20 +-2.42151 +11 +6.12968 +21 +-2.42151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12968 +20 +-2.42151 +11 +6.13069 +21 +-2.42169 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13069 +20 +-2.42169 +11 +6.13224 +21 +-2.42299 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13224 +20 +-2.42299 +11 +6.13259 +21 +-2.42498 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13259 +20 +-2.42498 +11 +6.13158 +21 +-2.42673 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13158 +20 +-2.42673 +11 +6.12968 +21 +-2.42742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12968 +20 +-2.42742 +11 +6.10531 +21 +-2.42742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10531 +20 +-2.42742 +11 +6.10467 +21 +-2.4273 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10467 +20 +-2.4273 +11 +6.10455 +21 +-2.42732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10455 +20 +-2.42732 +11 +6.10448 +21 +-2.42727 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10448 +20 +-2.42727 +11 +6.1043 +21 +-2.42724 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1043 +20 +-2.42724 +11 +6.10362 +21 +-2.42667 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10362 +20 +-2.42667 +11 +6.10289 +21 +-2.42616 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10289 +20 +-2.42616 +11 +6.10286 +21 +-2.42603 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10286 +20 +-2.42603 +11 +6.10275 +21 +-2.42594 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10275 +20 +-2.42594 +11 +6.1026 +21 +-2.42506 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1026 +20 +-2.42506 +11 +6.10237 +21 +-2.42421 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10237 +20 +-2.42421 +11 +6.10242 +21 +-2.42408 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10242 +20 +-2.42408 +11 +6.1024 +21 +-2.42395 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1024 +20 +-2.42395 +11 +6.10285 +21 +-2.42318 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10285 +20 +-2.42318 +11 +6.10322 +21 +-2.42238 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10322 +20 +-2.42238 +11 +6.12523 +21 +-2.40037 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12523 +20 +-2.40037 +11 +6.12673 +21 +-2.39586 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12673 +20 +-2.39586 +11 +6.12673 +21 +-2.39329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12673 +20 +-2.39329 +11 +6.12538 +21 +-2.39059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12538 +20 +-2.39059 +11 +6.12418 +21 +-2.3894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12418 +20 +-2.3894 +11 +6.12149 +21 +-2.38805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12149 +20 +-2.38805 +11 +6.11351 +21 +-2.38805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11351 +20 +-2.38805 +11 +6.11081 +21 +-2.3894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11081 +20 +-2.3894 +11 +6.10927 +21 +-2.39093 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10927 +20 +-2.39093 +11 +6.10843 +21 +-2.39152 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10843 +20 +-2.39152 +11 +6.10642 +21 +-2.3917 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10642 +20 +-2.3917 +11 +6.10477 +21 +-2.39054 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10477 +20 +-2.39054 +11 +6.10424 +21 +-2.38859 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10424 +20 +-2.38859 +11 +6.1051 +21 +-2.38676 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1051 +20 +-2.38676 +11 +6.10697 +21 +-2.38488 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10697 +20 +-2.38488 +11 +6.10769 +21 +-2.38437 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10769 +20 +-2.38437 +11 +6.10774 +21 +-2.38433 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10774 +20 +-2.38433 +11 +6.11149 +21 +-2.38245 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11149 +20 +-2.38245 +11 +6.11247 +21 +-2.38216 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11247 +20 +-2.38216 +11 +6.11264 +21 +-2.3822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11264 +20 +-2.3822 +11 +6.11281 +21 +-2.38214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11281 +20 +-2.38214 +11 +6.12218 +21 +-2.38214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12218 +20 +-2.38214 +11 +6.12319 +21 +-2.38232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08128 +20 +-2.38222 +11 +6.08145 +21 +-2.38219 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08145 +20 +-2.38219 +11 +6.08219 +21 +-2.38261 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08219 +20 +-2.38261 +11 +6.08298 +21 +-2.38296 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08298 +20 +-2.38296 +11 +6.08305 +21 +-2.38311 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08305 +20 +-2.38311 +11 +6.0832 +21 +-2.3832 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0832 +20 +-2.3832 +11 +6.08349 +21 +-2.384 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08349 +20 +-2.384 +11 +6.08387 +21 +-2.38477 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08387 +20 +-2.38477 +11 +6.08383 +21 +-2.38493 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08383 +20 +-2.38493 +11 +6.08389 +21 +-2.38509 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08389 +20 +-2.38509 +11 +6.08389 +21 +-2.42151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08389 +20 +-2.42151 +11 +6.09219 +21 +-2.42151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09219 +20 +-2.42151 +11 +6.0932 +21 +-2.42169 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0932 +20 +-2.42169 +11 +6.09474 +21 +-2.42299 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09474 +20 +-2.42299 +11 +6.09509 +21 +-2.42498 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09509 +20 +-2.42498 +11 +6.09408 +21 +-2.42673 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09408 +20 +-2.42673 +11 +6.09219 +21 +-2.42742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09219 +20 +-2.42742 +11 +6.06969 +21 +-2.42742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06969 +20 +-2.42742 +11 +6.06868 +21 +-2.42724 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06868 +20 +-2.42724 +11 +6.06713 +21 +-2.42594 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06713 +20 +-2.42594 +11 +6.06678 +21 +-2.42395 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06678 +20 +-2.42395 +11 +6.06779 +21 +-2.4222 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06779 +20 +-2.4222 +11 +6.06969 +21 +-2.42151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06969 +20 +-2.42151 +11 +6.07798 +21 +-2.42151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07798 +20 +-2.42151 +11 +6.07798 +21 +-2.3941 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07798 +20 +-2.3941 +11 +6.07553 +21 +-2.39656 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07553 +20 +-2.39656 +11 +6.0748 +21 +-2.39706 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0748 +20 +-2.39706 +11 +6.07476 +21 +-2.39711 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07476 +20 +-2.39711 +11 +6.07101 +21 +-2.39898 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07101 +20 +-2.39898 +11 +6.07003 +21 +-2.39928 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07003 +20 +-2.39928 +11 +6.06806 +21 +-2.39881 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06806 +20 +-2.39881 +11 +6.06686 +21 +-2.39718 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06686 +20 +-2.39718 +11 +6.06698 +21 +-2.39517 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06698 +20 +-2.39517 +11 +6.06837 +21 +-2.3937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.06837 +20 +-2.3937 +11 +6.07169 +21 +-2.39204 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07169 +20 +-2.39204 +11 +6.07489 +21 +-2.38884 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07489 +20 +-2.38884 +11 +6.07848 +21 +-2.38346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07848 +20 +-2.38346 +11 +6.07919 +21 +-2.38271 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07919 +20 +-2.38271 +11 +6.07935 +21 +-2.38267 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07935 +20 +-2.38267 +11 +6.07946 +21 +-2.38254 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07946 +20 +-2.38254 +11 +6.0803 +21 +-2.38239 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0803 +20 +-2.38239 +11 +6.08113 +21 +-2.38215 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08113 +20 +-2.38215 +11 +6.08128 +21 +-2.38222 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0482 +20 +-2.38232 +11 +6.04834 +21 +-2.38243 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04834 +20 +-2.38243 +11 +6.04851 +21 +-2.38245 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04851 +20 +-2.38245 +11 +6.05226 +21 +-2.38433 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05226 +20 +-2.38433 +11 +6.05297 +21 +-2.38485 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05297 +20 +-2.38485 +11 +6.05303 +21 +-2.38488 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05303 +20 +-2.38488 +11 +6.0549 +21 +-2.38676 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0549 +20 +-2.38676 +11 +6.05541 +21 +-2.38748 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05541 +20 +-2.38748 +11 +6.05546 +21 +-2.38752 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05546 +20 +-2.38752 +11 +6.05733 +21 +-2.39127 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05733 +20 +-2.39127 +11 +6.05762 +21 +-2.39226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05762 +20 +-2.39226 +11 +6.05758 +21 +-2.39243 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05758 +20 +-2.39243 +11 +6.05764 +21 +-2.39259 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05764 +20 +-2.39259 +11 +6.05764 +21 +-2.39822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05764 +20 +-2.39822 +11 +6.05747 +21 +-2.39923 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05747 +20 +-2.39923 +11 +6.05735 +21 +-2.39936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05735 +20 +-2.39936 +11 +6.05733 +21 +-2.39954 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05733 +20 +-2.39954 +11 +6.05546 +21 +-2.40329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05546 +20 +-2.40329 +11 +6.05493 +21 +-2.404 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05493 +20 +-2.404 +11 +6.0549 +21 +-2.40405 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0549 +20 +-2.40405 +11 +6.05303 +21 +-2.40593 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05303 +20 +-2.40593 +11 +6.05231 +21 +-2.40644 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05231 +20 +-2.40644 +11 +6.05226 +21 +-2.40648 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05226 +20 +-2.40648 +11 +6.04851 +21 +-2.40836 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04851 +20 +-2.40836 +11 +6.04753 +21 +-2.40865 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04753 +20 +-2.40865 +11 +6.04736 +21 +-2.40861 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04736 +20 +-2.40861 +11 +6.04723 +21 +-2.40866 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04723 +20 +-2.40866 +11 +6.05711 +21 +-2.42277 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05711 +20 +-2.42277 +11 +6.05754 +21 +-2.4237 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05754 +20 +-2.4237 +11 +6.05737 +21 +-2.42571 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05737 +20 +-2.42571 +11 +6.05594 +21 +-2.42714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05594 +20 +-2.42714 +11 +6.05393 +21 +-2.42732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05393 +20 +-2.42732 +11 +6.05227 +21 +-2.42616 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05227 +20 +-2.42616 +11 +6.04003 +21 +-2.40867 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04003 +20 +-2.40867 +11 +6.03515 +21 +-2.40867 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03515 +20 +-2.40867 +11 +6.03515 +21 +-2.42446 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03515 +20 +-2.42446 +11 +6.03497 +21 +-2.42547 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03497 +20 +-2.42547 +11 +6.03367 +21 +-2.42702 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03367 +20 +-2.42702 +11 +6.03168 +21 +-2.42737 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03168 +20 +-2.42737 +11 +6.02993 +21 +-2.42636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02993 +20 +-2.42636 +11 +6.02924 +21 +-2.42446 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02924 +20 +-2.42446 +11 +6.02924 +21 +-2.38509 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02924 +20 +-2.38509 +11 +6.02931 +21 +-2.38471 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02931 +20 +-2.38471 +11 +6.02929 +21 +-2.38458 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02929 +20 +-2.38458 +11 +6.02935 +21 +-2.38447 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02935 +20 +-2.38447 +11 +6.02942 +21 +-2.38408 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02942 +20 +-2.38408 +11 +6.02991 +21 +-2.3835 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.02991 +20 +-2.3835 +11 +6.0303 +21 +-2.38283 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0303 +20 +-2.38283 +11 +6.03055 +21 +-2.38274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03055 +20 +-2.38274 +11 +6.03072 +21 +-2.38254 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03072 +20 +-2.38254 +11 +6.03147 +21 +-2.3824 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03147 +20 +-2.3824 +11 +6.03219 +21 +-2.38214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03219 +20 +-2.38214 +11 +6.04719 +21 +-2.38214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04719 +20 +-2.38214 +11 +6.0482 +21 +-2.38232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03515 +20 +-2.40276 +11 +6.04649 +21 +-2.40276 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04649 +20 +-2.40276 +11 +6.04919 +21 +-2.40141 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04919 +20 +-2.40141 +11 +6.05039 +21 +-2.40022 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05039 +20 +-2.40022 +11 +6.05174 +21 +-2.39752 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05174 +20 +-2.39752 +11 +6.05174 +21 +-2.39329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05174 +20 +-2.39329 +11 +6.05039 +21 +-2.39059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.05039 +20 +-2.39059 +11 +6.04919 +21 +-2.3894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04919 +20 +-2.3894 +11 +6.04649 +21 +-2.38805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.04649 +20 +-2.38805 +11 +6.03515 +21 +-2.38805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.03515 +20 +-2.38805 +11 +6.03515 +21 +-2.40276 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40568 +20 +-2.41301 +11 +6.40638 +21 +-2.41469 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40638 +20 +-2.41469 +11 +6.40568 +21 +-2.41636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40568 +20 +-2.41636 +11 +6.40401 +21 +-2.41705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40401 +20 +-2.41705 +11 +6.38614 +21 +-2.41705 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38614 +20 +-2.41705 +11 +6.38446 +21 +-2.41636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38446 +20 +-2.41636 +11 +6.38377 +21 +-2.41469 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38377 +20 +-2.41469 +11 +6.38446 +21 +-2.41301 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38446 +20 +-2.41301 +11 +6.38614 +21 +-2.41232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38614 +20 +-2.41232 +11 +6.40401 +21 +-2.41232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40401 +20 +-2.41232 +11 +6.40568 +21 +-2.41301 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28444 +20 +-2.36307 +11 +6.28458 +21 +-2.36318 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28458 +20 +-2.36318 +11 +6.28476 +21 +-2.3632 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28476 +20 +-2.3632 +11 +6.2885 +21 +-2.36508 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2885 +20 +-2.36508 +11 +6.28921 +21 +-2.3656 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28921 +20 +-2.3656 +11 +6.28927 +21 +-2.36563 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28927 +20 +-2.36563 +11 +6.29115 +21 +-2.3675 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29115 +20 +-2.3675 +11 +6.29165 +21 +-2.36823 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29165 +20 +-2.36823 +11 +6.2917 +21 +-2.36827 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2917 +20 +-2.36827 +11 +6.29357 +21 +-2.37202 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29357 +20 +-2.37202 +11 +6.29387 +21 +-2.373 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29387 +20 +-2.373 +11 +6.29383 +21 +-2.37317 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29383 +20 +-2.37317 +11 +6.29389 +21 +-2.37334 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29389 +20 +-2.37334 +11 +6.29389 +21 +-2.38834 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29389 +20 +-2.38834 +11 +6.29378 +21 +-2.38892 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29378 +20 +-2.38892 +11 +6.2938 +21 +-2.38906 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2938 +20 +-2.38906 +11 +6.29192 +21 +-2.39655 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29192 +20 +-2.39655 +11 +6.29152 +21 +-2.39746 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29152 +20 +-2.39746 +11 +6.29152 +21 +-2.39748 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29152 +20 +-2.39748 +11 +6.28777 +21 +-2.4031 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28777 +20 +-2.4031 +11 +6.28746 +21 +-2.40343 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28746 +20 +-2.40343 +11 +6.2874 +21 +-2.40355 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2874 +20 +-2.40355 +11 +6.28552 +21 +-2.40542 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28552 +20 +-2.40542 +11 +6.2848 +21 +-2.40593 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2848 +20 +-2.40593 +11 +6.28476 +21 +-2.40598 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28476 +20 +-2.40598 +11 +6.28101 +21 +-2.40785 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28101 +20 +-2.40785 +11 +6.28002 +21 +-2.40815 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28002 +20 +-2.40815 +11 +6.27985 +21 +-2.4081 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27985 +20 +-2.4081 +11 +6.27969 +21 +-2.40816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27969 +20 +-2.40816 +11 +6.27219 +21 +-2.40816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27219 +20 +-2.40816 +11 +6.27118 +21 +-2.40799 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27118 +20 +-2.40799 +11 +6.26963 +21 +-2.40669 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26963 +20 +-2.40669 +11 +6.26928 +21 +-2.4047 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26928 +20 +-2.4047 +11 +6.27029 +21 +-2.40295 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27029 +20 +-2.40295 +11 +6.27219 +21 +-2.40226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27219 +20 +-2.40226 +11 +6.27899 +21 +-2.40226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27899 +20 +-2.40226 +11 +6.28169 +21 +-2.40091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28169 +20 +-2.40091 +11 +6.28301 +21 +-2.39958 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28301 +20 +-2.39958 +11 +6.28632 +21 +-2.39463 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28632 +20 +-2.39463 +11 +6.28705 +21 +-2.39171 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28705 +20 +-2.39171 +11 +6.28476 +21 +-2.39285 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28476 +20 +-2.39285 +11 +6.28377 +21 +-2.39315 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28377 +20 +-2.39315 +11 +6.2836 +21 +-2.39311 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2836 +20 +-2.39311 +11 +6.28343 +21 +-2.39317 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28343 +20 +-2.39317 +11 +6.27594 +21 +-2.39317 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27594 +20 +-2.39317 +11 +6.27493 +21 +-2.39299 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27493 +20 +-2.39299 +11 +6.27479 +21 +-2.39287 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27479 +20 +-2.39287 +11 +6.27461 +21 +-2.39285 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27461 +20 +-2.39285 +11 +6.27087 +21 +-2.39098 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27087 +20 +-2.39098 +11 +6.27016 +21 +-2.39045 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27016 +20 +-2.39045 +11 +6.2701 +21 +-2.39043 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2701 +20 +-2.39043 +11 +6.26822 +21 +-2.38855 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26822 +20 +-2.38855 +11 +6.26772 +21 +-2.38783 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26772 +20 +-2.38783 +11 +6.26767 +21 +-2.38778 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26767 +20 +-2.38778 +11 +6.2658 +21 +-2.38404 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2658 +20 +-2.38404 +11 +6.2655 +21 +-2.38305 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2655 +20 +-2.38305 +11 +6.26554 +21 +-2.38288 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26554 +20 +-2.38288 +11 +6.26548 +21 +-2.38271 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26548 +20 +-2.38271 +11 +6.26548 +21 +-2.37334 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26548 +20 +-2.37334 +11 +6.26566 +21 +-2.37233 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26566 +20 +-2.37233 +11 +6.26578 +21 +-2.3722 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26578 +20 +-2.3722 +11 +6.2658 +21 +-2.37202 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2658 +20 +-2.37202 +11 +6.26767 +21 +-2.36827 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26767 +20 +-2.36827 +11 +6.2682 +21 +-2.36756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2682 +20 +-2.36756 +11 +6.26822 +21 +-2.3675 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.26822 +20 +-2.3675 +11 +6.2701 +21 +-2.36563 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2701 +20 +-2.36563 +11 +6.27082 +21 +-2.36512 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27082 +20 +-2.36512 +11 +6.27087 +21 +-2.36508 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27087 +20 +-2.36508 +11 +6.27461 +21 +-2.3632 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27461 +20 +-2.3632 +11 +6.2756 +21 +-2.36291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2756 +20 +-2.36291 +11 +6.27577 +21 +-2.36295 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27577 +20 +-2.36295 +11 +6.27594 +21 +-2.36289 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27594 +20 +-2.36289 +11 +6.28343 +21 +-2.36289 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28343 +20 +-2.36289 +11 +6.28444 +21 +-2.36307 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27394 +20 +-2.37014 +11 +6.27274 +21 +-2.37134 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27274 +20 +-2.37134 +11 +6.27139 +21 +-2.37404 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27139 +20 +-2.37404 +11 +6.27139 +21 +-2.38202 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27139 +20 +-2.38202 +11 +6.27274 +21 +-2.38472 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27274 +20 +-2.38472 +11 +6.27394 +21 +-2.38591 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27394 +20 +-2.38591 +11 +6.27663 +21 +-2.38726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27663 +20 +-2.38726 +11 +6.28274 +21 +-2.38726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28274 +20 +-2.38726 +11 +6.28543 +21 +-2.38591 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28543 +20 +-2.38591 +11 +6.28663 +21 +-2.38472 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28663 +20 +-2.38472 +11 +6.28798 +21 +-2.38202 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28798 +20 +-2.38202 +11 +6.28798 +21 +-2.37404 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28798 +20 +-2.37404 +11 +6.28663 +21 +-2.37134 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28663 +20 +-2.37134 +11 +6.28543 +21 +-2.37014 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28543 +20 +-2.37014 +11 +6.28274 +21 +-2.36879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28274 +20 +-2.36879 +11 +6.27663 +21 +-2.36879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.27663 +20 +-2.36879 +11 +6.27394 +21 +-2.37014 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24695 +20 +-2.36307 +11 +6.24708 +21 +-2.36318 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24708 +20 +-2.36318 +11 +6.24726 +21 +-2.3632 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24726 +20 +-2.3632 +11 +6.25101 +21 +-2.36508 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25101 +20 +-2.36508 +11 +6.25172 +21 +-2.3656 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25172 +20 +-2.3656 +11 +6.25178 +21 +-2.36563 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25178 +20 +-2.36563 +11 +6.25365 +21 +-2.3675 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25365 +20 +-2.3675 +11 +6.25416 +21 +-2.36823 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25416 +20 +-2.36823 +11 +6.2542 +21 +-2.36827 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2542 +20 +-2.36827 +11 +6.25608 +21 +-2.37202 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25608 +20 +-2.37202 +11 +6.25637 +21 +-2.373 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25637 +20 +-2.373 +11 +6.25633 +21 +-2.37317 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25633 +20 +-2.37317 +11 +6.25639 +21 +-2.37334 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25639 +20 +-2.37334 +11 +6.25639 +21 +-2.37897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25639 +20 +-2.37897 +11 +6.25621 +21 +-2.37998 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25621 +20 +-2.37998 +11 +6.2561 +21 +-2.38011 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2561 +20 +-2.38011 +11 +6.25608 +21 +-2.38029 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25608 +20 +-2.38029 +11 +6.2542 +21 +-2.38404 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2542 +20 +-2.38404 +11 +6.25368 +21 +-2.38474 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25368 +20 +-2.38474 +11 +6.25365 +21 +-2.3848 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25365 +20 +-2.3848 +11 +6.25178 +21 +-2.38668 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25178 +20 +-2.38668 +11 +6.25105 +21 +-2.38718 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25105 +20 +-2.38718 +11 +6.25101 +21 +-2.38723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25101 +20 +-2.38723 +11 +6.24726 +21 +-2.38911 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24726 +20 +-2.38911 +11 +6.24628 +21 +-2.3894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24628 +20 +-2.3894 +11 +6.24611 +21 +-2.38936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24611 +20 +-2.38936 +11 +6.24598 +21 +-2.3894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24598 +20 +-2.3894 +11 +6.25586 +21 +-2.40352 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25586 +20 +-2.40352 +11 +6.25629 +21 +-2.40445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25629 +20 +-2.40445 +11 +6.25611 +21 +-2.40646 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25611 +20 +-2.40646 +11 +6.25469 +21 +-2.40789 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25469 +20 +-2.40789 +11 +6.25267 +21 +-2.40806 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25267 +20 +-2.40806 +11 +6.25102 +21 +-2.40691 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25102 +20 +-2.40691 +11 +6.23878 +21 +-2.38942 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23878 +20 +-2.38942 +11 +6.23389 +21 +-2.38942 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23389 +20 +-2.38942 +11 +6.23389 +21 +-2.40521 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23389 +20 +-2.40521 +11 +6.23372 +21 +-2.40622 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23372 +20 +-2.40622 +11 +6.23242 +21 +-2.40777 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23242 +20 +-2.40777 +11 +6.23043 +21 +-2.40812 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23043 +20 +-2.40812 +11 +6.22868 +21 +-2.40711 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22868 +20 +-2.40711 +11 +6.22799 +21 +-2.40521 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22799 +20 +-2.40521 +11 +6.22799 +21 +-2.36584 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22799 +20 +-2.36584 +11 +6.22806 +21 +-2.36546 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22806 +20 +-2.36546 +11 +6.22803 +21 +-2.36533 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22803 +20 +-2.36533 +11 +6.2281 +21 +-2.36522 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2281 +20 +-2.36522 +11 +6.22817 +21 +-2.36483 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22817 +20 +-2.36483 +11 +6.22866 +21 +-2.36424 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22866 +20 +-2.36424 +11 +6.22904 +21 +-2.36358 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22904 +20 +-2.36358 +11 +6.22929 +21 +-2.36349 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22929 +20 +-2.36349 +11 +6.22946 +21 +-2.36328 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.22946 +20 +-2.36328 +11 +6.23022 +21 +-2.36315 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23022 +20 +-2.36315 +11 +6.23094 +21 +-2.36289 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23094 +20 +-2.36289 +11 +6.24594 +21 +-2.36289 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24594 +20 +-2.36289 +11 +6.24695 +21 +-2.36307 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23389 +20 +-2.38351 +11 +6.24524 +21 +-2.38351 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24524 +20 +-2.38351 +11 +6.24794 +21 +-2.38216 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24794 +20 +-2.38216 +11 +6.24914 +21 +-2.38097 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24914 +20 +-2.38097 +11 +6.25049 +21 +-2.37827 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25049 +20 +-2.37827 +11 +6.25049 +21 +-2.37404 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.25049 +20 +-2.37404 +11 +6.24914 +21 +-2.37134 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24914 +20 +-2.37134 +11 +6.24794 +21 +-2.37014 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24794 +20 +-2.37014 +11 +6.24524 +21 +-2.36879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.24524 +20 +-2.36879 +11 +6.23389 +21 +-2.36879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.23389 +20 +-2.36879 +11 +6.23389 +21 +-2.38351 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98648 +20 +-2.36878 +11 +5.98992 +21 +-2.37167 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98992 +20 +-2.37167 +11 +5.99217 +21 +-2.37557 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99217 +20 +-2.37557 +11 +5.99295 +21 +-2.38 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99295 +20 +-2.38 +11 +5.99217 +21 +-2.38443 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.99217 +20 +-2.38443 +11 +5.98992 +21 +-2.38833 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98992 +20 +-2.38833 +11 +5.98648 +21 +-2.39122 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98648 +20 +-2.39122 +11 +5.98225 +21 +-2.39276 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98225 +20 +-2.39276 +11 +5.97775 +21 +-2.39276 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97775 +20 +-2.39276 +11 +5.97352 +21 +-2.39122 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97352 +20 +-2.39122 +11 +5.97008 +21 +-2.38833 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97008 +20 +-2.38833 +11 +5.96783 +21 +-2.38443 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96783 +20 +-2.38443 +11 +5.96705 +21 +-2.38 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96705 +20 +-2.38 +11 +5.96783 +21 +-2.37557 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.96783 +20 +-2.37557 +11 +5.97008 +21 +-2.37167 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97008 +20 +-2.37167 +11 +5.97352 +21 +-2.36878 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97352 +20 +-2.36878 +11 +5.97775 +21 +-2.36724 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.97775 +20 +-2.36724 +11 +5.98225 +21 +-2.36724 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.98225 +20 +-2.36724 +11 +5.98648 +21 +-2.36878 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40568 +20 +-2.35514 +11 +6.40638 +21 +-2.35681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40638 +20 +-2.35681 +11 +6.40568 +21 +-2.35848 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40568 +20 +-2.35848 +11 +6.40401 +21 +-2.35917 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40401 +20 +-2.35917 +11 +6.38614 +21 +-2.35917 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38614 +20 +-2.35917 +11 +6.38446 +21 +-2.35848 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38446 +20 +-2.35848 +11 +6.38377 +21 +-2.35681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38377 +20 +-2.35681 +11 +6.38446 +21 +-2.35514 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38446 +20 +-2.35514 +11 +6.38614 +21 +-2.35445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38614 +20 +-2.35445 +11 +6.40401 +21 +-2.35445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.40401 +20 +-2.35445 +11 +6.40568 +21 +-2.35514 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90696 +20 +-2.34727 +11 +5.90765 +21 +-2.34894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90765 +20 +-2.34894 +11 +5.90696 +21 +-2.35061 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90696 +20 +-2.35061 +11 +5.90529 +21 +-2.3513 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90529 +20 +-2.3513 +11 +5.88471 +21 +-2.3513 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88471 +20 +-2.3513 +11 +5.88304 +21 +-2.35061 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88304 +20 +-2.35061 +11 +5.88235 +21 +-2.34894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88235 +20 +-2.34894 +11 +5.88304 +21 +-2.34727 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88304 +20 +-2.34727 +11 +5.88471 +21 +-2.34657 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88471 +20 +-2.34657 +11 +5.90529 +21 +-2.34657 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90529 +20 +-2.34657 +11 +5.90696 +21 +-2.34727 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58819 +20 +-2.30307 +11 +6.58833 +21 +-2.30318 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58833 +20 +-2.30318 +11 +6.5885 +21 +-2.3032 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5885 +20 +-2.3032 +11 +6.59225 +21 +-2.30508 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59225 +20 +-2.30508 +11 +6.59296 +21 +-2.3056 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59296 +20 +-2.3056 +11 +6.59302 +21 +-2.30563 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59302 +20 +-2.30563 +11 +6.59489 +21 +-2.3075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59489 +20 +-2.3075 +11 +6.5954 +21 +-2.30823 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5954 +20 +-2.30823 +11 +6.59545 +21 +-2.30827 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59545 +20 +-2.30827 +11 +6.59732 +21 +-2.31202 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59732 +20 +-2.31202 +11 +6.59761 +21 +-2.313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59761 +20 +-2.313 +11 +6.59757 +21 +-2.31317 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59757 +20 +-2.31317 +11 +6.59763 +21 +-2.31334 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59763 +20 +-2.31334 +11 +6.59763 +21 +-2.31522 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59763 +20 +-2.31522 +11 +6.59746 +21 +-2.31623 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59746 +20 +-2.31623 +11 +6.59734 +21 +-2.31636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59734 +20 +-2.31636 +11 +6.59732 +21 +-2.31654 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59732 +20 +-2.31654 +11 +6.59545 +21 +-2.32029 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59545 +20 +-2.32029 +11 +6.59492 +21 +-2.32099 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59492 +20 +-2.32099 +11 +6.59489 +21 +-2.32105 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59489 +20 +-2.32105 +11 +6.59323 +21 +-2.32271 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59323 +20 +-2.32271 +11 +6.59489 +21 +-2.32438 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59489 +20 +-2.32438 +11 +6.5954 +21 +-2.3251 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5954 +20 +-2.3251 +11 +6.59545 +21 +-2.32514 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59545 +20 +-2.32514 +11 +6.59732 +21 +-2.32889 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59732 +20 +-2.32889 +11 +6.59761 +21 +-2.32988 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59761 +20 +-2.32988 +11 +6.59757 +21 +-2.33005 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59757 +20 +-2.33005 +11 +6.59763 +21 +-2.33021 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59763 +20 +-2.33021 +11 +6.59763 +21 +-2.33771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59763 +20 +-2.33771 +11 +6.59746 +21 +-2.33872 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59746 +20 +-2.33872 +11 +6.59734 +21 +-2.33886 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59734 +20 +-2.33886 +11 +6.59732 +21 +-2.33903 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59732 +20 +-2.33903 +11 +6.59545 +21 +-2.34278 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59545 +20 +-2.34278 +11 +6.59492 +21 +-2.34349 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59492 +20 +-2.34349 +11 +6.59489 +21 +-2.34355 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59489 +20 +-2.34355 +11 +6.59302 +21 +-2.34542 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59302 +20 +-2.34542 +11 +6.5923 +21 +-2.34593 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5923 +20 +-2.34593 +11 +6.59225 +21 +-2.34598 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59225 +20 +-2.34598 +11 +6.5885 +21 +-2.34785 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5885 +20 +-2.34785 +11 +6.58752 +21 +-2.34815 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58752 +20 +-2.34815 +11 +6.58735 +21 +-2.3481 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58735 +20 +-2.3481 +11 +6.58718 +21 +-2.34816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58718 +20 +-2.34816 +11 +6.57968 +21 +-2.34816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57968 +20 +-2.34816 +11 +6.57867 +21 +-2.34799 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57867 +20 +-2.34799 +11 +6.57854 +21 +-2.34787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57854 +20 +-2.34787 +11 +6.57836 +21 +-2.34785 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57836 +20 +-2.34785 +11 +6.57461 +21 +-2.34598 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57461 +20 +-2.34598 +11 +6.5739 +21 +-2.34545 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5739 +20 +-2.34545 +11 +6.57385 +21 +-2.34542 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57385 +20 +-2.34542 +11 +6.57197 +21 +-2.34355 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57197 +20 +-2.34355 +11 +6.57146 +21 +-2.34283 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57146 +20 +-2.34283 +11 +6.57142 +21 +-2.34278 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57142 +20 +-2.34278 +11 +6.56954 +21 +-2.33903 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56954 +20 +-2.33903 +11 +6.56925 +21 +-2.33805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56925 +20 +-2.33805 +11 +6.56929 +21 +-2.33788 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56929 +20 +-2.33788 +11 +6.56923 +21 +-2.33771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56923 +20 +-2.33771 +11 +6.56923 +21 +-2.33021 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56923 +20 +-2.33021 +11 +6.56941 +21 +-2.3292 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56941 +20 +-2.3292 +11 +6.56952 +21 +-2.32907 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56952 +20 +-2.32907 +11 +6.56954 +21 +-2.32889 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56954 +20 +-2.32889 +11 +6.57142 +21 +-2.32514 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57142 +20 +-2.32514 +11 +6.57194 +21 +-2.32443 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57194 +20 +-2.32443 +11 +6.57197 +21 +-2.32438 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57197 +20 +-2.32438 +11 +6.57363 +21 +-2.32271 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57363 +20 +-2.32271 +11 +6.57197 +21 +-2.32105 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57197 +20 +-2.32105 +11 +6.57146 +21 +-2.32033 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57146 +20 +-2.32033 +11 +6.57142 +21 +-2.32029 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57142 +20 +-2.32029 +11 +6.56954 +21 +-2.31654 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56954 +20 +-2.31654 +11 +6.56925 +21 +-2.31555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56925 +20 +-2.31555 +11 +6.56929 +21 +-2.31538 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56929 +20 +-2.31538 +11 +6.56923 +21 +-2.31522 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56923 +20 +-2.31522 +11 +6.56923 +21 +-2.31334 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56923 +20 +-2.31334 +11 +6.56941 +21 +-2.31233 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56941 +20 +-2.31233 +11 +6.56952 +21 +-2.3122 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56952 +20 +-2.3122 +11 +6.56954 +21 +-2.31202 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56954 +20 +-2.31202 +11 +6.57142 +21 +-2.30827 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57142 +20 +-2.30827 +11 +6.57194 +21 +-2.30756 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57194 +20 +-2.30756 +11 +6.57197 +21 +-2.3075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57197 +20 +-2.3075 +11 +6.57385 +21 +-2.30563 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57385 +20 +-2.30563 +11 +6.57457 +21 +-2.30512 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57457 +20 +-2.30512 +11 +6.57461 +21 +-2.30508 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57461 +20 +-2.30508 +11 +6.57836 +21 +-2.3032 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57836 +20 +-2.3032 +11 +6.57935 +21 +-2.30291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57935 +20 +-2.30291 +11 +6.57952 +21 +-2.30295 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57952 +20 +-2.30295 +11 +6.57968 +21 +-2.30289 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57968 +20 +-2.30289 +11 +6.58718 +21 +-2.30289 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58718 +20 +-2.30289 +11 +6.58819 +21 +-2.30307 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57768 +20 +-2.32702 +11 +6.57649 +21 +-2.32821 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57649 +20 +-2.32821 +11 +6.57514 +21 +-2.33091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57514 +20 +-2.33091 +11 +6.57514 +21 +-2.33702 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57514 +20 +-2.33702 +11 +6.57649 +21 +-2.33971 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57649 +20 +-2.33971 +11 +6.57768 +21 +-2.34091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57768 +20 +-2.34091 +11 +6.58038 +21 +-2.34226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58038 +20 +-2.34226 +11 +6.58649 +21 +-2.34226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58649 +20 +-2.34226 +11 +6.58918 +21 +-2.34091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58918 +20 +-2.34091 +11 +6.59038 +21 +-2.33971 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59038 +20 +-2.33971 +11 +6.59173 +21 +-2.33702 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59173 +20 +-2.33702 +11 +6.59173 +21 +-2.33091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59173 +20 +-2.33091 +11 +6.59038 +21 +-2.32821 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59038 +20 +-2.32821 +11 +6.58918 +21 +-2.32702 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58918 +20 +-2.32702 +11 +6.58649 +21 +-2.32567 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58649 +20 +-2.32567 +11 +6.58038 +21 +-2.32567 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58038 +20 +-2.32567 +11 +6.57768 +21 +-2.32702 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57768 +20 +-2.31014 +11 +6.57649 +21 +-2.31134 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57649 +20 +-2.31134 +11 +6.57514 +21 +-2.31404 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57514 +20 +-2.31404 +11 +6.57514 +21 +-2.31452 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57514 +20 +-2.31452 +11 +6.57649 +21 +-2.31722 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57649 +20 +-2.31722 +11 +6.57768 +21 +-2.31841 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57768 +20 +-2.31841 +11 +6.58038 +21 +-2.31976 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58038 +20 +-2.31976 +11 +6.58649 +21 +-2.31976 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58649 +20 +-2.31976 +11 +6.58918 +21 +-2.31841 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58918 +20 +-2.31841 +11 +6.59038 +21 +-2.31722 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59038 +20 +-2.31722 +11 +6.59173 +21 +-2.31452 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59173 +20 +-2.31452 +11 +6.59173 +21 +-2.31404 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59173 +20 +-2.31404 +11 +6.59038 +21 +-2.31134 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59038 +20 +-2.31134 +11 +6.58918 +21 +-2.31014 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58918 +20 +-2.31014 +11 +6.58649 +21 +-2.30879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58649 +20 +-2.30879 +11 +6.58038 +21 +-2.30879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58038 +20 +-2.30879 +11 +6.57768 +21 +-2.31014 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54628 +20 +-2.30296 +11 +6.54645 +21 +-2.30293 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54645 +20 +-2.30293 +11 +6.54719 +21 +-2.30336 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54719 +20 +-2.30336 +11 +6.54798 +21 +-2.30371 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54798 +20 +-2.30371 +11 +6.54805 +21 +-2.30386 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54805 +20 +-2.30386 +11 +6.5482 +21 +-2.30394 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5482 +20 +-2.30394 +11 +6.54849 +21 +-2.30475 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54849 +20 +-2.30475 +11 +6.54887 +21 +-2.30552 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54887 +20 +-2.30552 +11 +6.54883 +21 +-2.30568 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54883 +20 +-2.30568 +11 +6.54889 +21 +-2.30584 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54889 +20 +-2.30584 +11 +6.54889 +21 +-2.34226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54889 +20 +-2.34226 +11 +6.55719 +21 +-2.34226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55719 +20 +-2.34226 +11 +6.5582 +21 +-2.34244 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5582 +20 +-2.34244 +11 +6.55974 +21 +-2.34374 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55974 +20 +-2.34374 +11 +6.56009 +21 +-2.34572 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56009 +20 +-2.34572 +11 +6.55908 +21 +-2.34747 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55908 +20 +-2.34747 +11 +6.55719 +21 +-2.34816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55719 +20 +-2.34816 +11 +6.53469 +21 +-2.34816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53469 +20 +-2.34816 +11 +6.53368 +21 +-2.34799 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53368 +20 +-2.34799 +11 +6.53213 +21 +-2.34669 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53213 +20 +-2.34669 +11 +6.53178 +21 +-2.3447 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53178 +20 +-2.3447 +11 +6.53279 +21 +-2.34295 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53279 +20 +-2.34295 +11 +6.53469 +21 +-2.34226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53469 +20 +-2.34226 +11 +6.54298 +21 +-2.34226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54298 +20 +-2.34226 +11 +6.54298 +21 +-2.31485 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54298 +20 +-2.31485 +11 +6.54053 +21 +-2.3173 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54053 +20 +-2.3173 +11 +6.5398 +21 +-2.31781 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5398 +20 +-2.31781 +11 +6.53976 +21 +-2.31786 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53976 +20 +-2.31786 +11 +6.53601 +21 +-2.31973 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53601 +20 +-2.31973 +11 +6.53503 +21 +-2.32002 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53503 +20 +-2.32002 +11 +6.53306 +21 +-2.31955 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53306 +20 +-2.31955 +11 +6.53186 +21 +-2.31793 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53186 +20 +-2.31793 +11 +6.53198 +21 +-2.31592 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53198 +20 +-2.31592 +11 +6.53337 +21 +-2.31445 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53337 +20 +-2.31445 +11 +6.53669 +21 +-2.31279 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53669 +20 +-2.31279 +11 +6.53989 +21 +-2.30958 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53989 +20 +-2.30958 +11 +6.54348 +21 +-2.3042 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54348 +20 +-2.3042 +11 +6.54419 +21 +-2.30346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54419 +20 +-2.30346 +11 +6.54435 +21 +-2.30341 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54435 +20 +-2.30341 +11 +6.54446 +21 +-2.30328 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54446 +20 +-2.30328 +11 +6.5453 +21 +-2.30314 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5453 +20 +-2.30314 +11 +6.54613 +21 +-2.3029 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.54613 +20 +-2.3029 +11 +6.54628 +21 +-2.30296 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51306 +20 +-2.30304 +11 +6.51313 +21 +-2.30304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51313 +20 +-2.30304 +11 +6.51875 +21 +-2.30492 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51875 +20 +-2.30492 +11 +6.51965 +21 +-2.3054 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51965 +20 +-2.3054 +11 +6.51974 +21 +-2.30555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51974 +20 +-2.30555 +11 +6.5199 +21 +-2.30563 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5199 +20 +-2.30563 +11 +6.52178 +21 +-2.3075 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52178 +20 +-2.3075 +11 +6.52237 +21 +-2.30834 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52237 +20 +-2.30834 +11 +6.52254 +21 +-2.31036 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52254 +20 +-2.31036 +11 +6.52138 +21 +-2.31201 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52138 +20 +-2.31201 +11 +6.51943 +21 +-2.31253 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51943 +20 +-2.31253 +11 +6.5176 +21 +-2.31168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5176 +20 +-2.31168 +11 +6.51622 +21 +-2.3103 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51622 +20 +-2.3103 +11 +6.51171 +21 +-2.30879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51171 +20 +-2.30879 +11 +6.50892 +21 +-2.30879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50892 +20 +-2.30879 +11 +6.50441 +21 +-2.3103 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50441 +20 +-2.3103 +11 +6.50149 +21 +-2.31322 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50149 +20 +-2.31322 +11 +6.49998 +21 +-2.31625 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49998 +20 +-2.31625 +11 +6.49827 +21 +-2.32308 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49827 +20 +-2.32308 +11 +6.49827 +21 +-2.32798 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49827 +20 +-2.32798 +11 +6.49998 +21 +-2.33481 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49998 +20 +-2.33481 +11 +6.50149 +21 +-2.33784 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50149 +20 +-2.33784 +11 +6.50441 +21 +-2.34076 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50441 +20 +-2.34076 +11 +6.50892 +21 +-2.34226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50892 +20 +-2.34226 +11 +6.51171 +21 +-2.34226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51171 +20 +-2.34226 +11 +6.51622 +21 +-2.34076 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51622 +20 +-2.34076 +11 +6.5176 +21 +-2.33937 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5176 +20 +-2.33937 +11 +6.51844 +21 +-2.33879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51844 +20 +-2.33879 +11 +6.52045 +21 +-2.33861 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52045 +20 +-2.33861 +11 +6.52211 +21 +-2.33977 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52211 +20 +-2.33977 +11 +6.52263 +21 +-2.34172 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52263 +20 +-2.34172 +11 +6.52178 +21 +-2.34355 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52178 +20 +-2.34355 +11 +6.5199 +21 +-2.34542 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5199 +20 +-2.34542 +11 +6.51906 +21 +-2.34601 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51906 +20 +-2.34601 +11 +6.51889 +21 +-2.34603 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51889 +20 +-2.34603 +11 +6.51875 +21 +-2.34614 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51875 +20 +-2.34614 +11 +6.51313 +21 +-2.34801 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51313 +20 +-2.34801 +11 +6.51225 +21 +-2.34814 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51225 +20 +-2.34814 +11 +6.51219 +21 +-2.34816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51219 +20 +-2.34816 +11 +6.50844 +21 +-2.34816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50844 +20 +-2.34816 +11 +6.50757 +21 +-2.34801 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50757 +20 +-2.34801 +11 +6.50751 +21 +-2.34801 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50751 +20 +-2.34801 +11 +6.50188 +21 +-2.34614 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50188 +20 +-2.34614 +11 +6.50098 +21 +-2.34565 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50098 +20 +-2.34565 +11 +6.50089 +21 +-2.3455 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50089 +20 +-2.3455 +11 +6.50073 +21 +-2.34542 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50073 +20 +-2.34542 +11 +6.49698 +21 +-2.34168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49698 +20 +-2.34168 +11 +6.49647 +21 +-2.34095 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49647 +20 +-2.34095 +11 +6.49643 +21 +-2.34091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49643 +20 +-2.34091 +11 +6.49455 +21 +-2.33716 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49455 +20 +-2.33716 +11 +6.49441 +21 +-2.33667 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49441 +20 +-2.33667 +11 +6.49433 +21 +-2.33655 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49433 +20 +-2.33655 +11 +6.49245 +21 +-2.32906 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49245 +20 +-2.32906 +11 +6.49241 +21 +-2.32847 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49241 +20 +-2.32847 +11 +6.49237 +21 +-2.32834 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49237 +20 +-2.32834 +11 +6.49237 +21 +-2.32271 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49237 +20 +-2.32271 +11 +6.49247 +21 +-2.32213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49247 +20 +-2.32213 +11 +6.49245 +21 +-2.322 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49245 +20 +-2.322 +11 +6.49433 +21 +-2.3145 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49433 +20 +-2.3145 +11 +6.49454 +21 +-2.31403 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49454 +20 +-2.31403 +11 +6.49455 +21 +-2.3139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49455 +20 +-2.3139 +11 +6.49643 +21 +-2.31015 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49643 +20 +-2.31015 +11 +6.49695 +21 +-2.30944 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49695 +20 +-2.30944 +11 +6.49698 +21 +-2.30938 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49698 +20 +-2.30938 +11 +6.50073 +21 +-2.30563 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50073 +20 +-2.30563 +11 +6.50157 +21 +-2.30504 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50157 +20 +-2.30504 +11 +6.50175 +21 +-2.30503 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50175 +20 +-2.30503 +11 +6.50188 +21 +-2.30492 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50188 +20 +-2.30492 +11 +6.50751 +21 +-2.30304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50751 +20 +-2.30304 +11 +6.50838 +21 +-2.30291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50838 +20 +-2.30291 +11 +6.50844 +21 +-2.30289 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50844 +20 +-2.30289 +11 +6.51219 +21 +-2.30289 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51219 +20 +-2.30289 +11 +6.51306 +21 +-2.30304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37332 +20 +-2.30032 +11 +6.37345 +21 +-2.30043 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37345 +20 +-2.30043 +11 +6.37363 +21 +-2.30045 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37363 +20 +-2.30045 +11 +6.37738 +21 +-2.30233 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37738 +20 +-2.30233 +11 +6.37809 +21 +-2.30285 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37809 +20 +-2.30285 +11 +6.37814 +21 +-2.30288 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37814 +20 +-2.30288 +11 +6.38002 +21 +-2.30476 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38002 +20 +-2.30476 +11 +6.38053 +21 +-2.30548 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38053 +20 +-2.30548 +11 +6.38057 +21 +-2.30552 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38057 +20 +-2.30552 +11 +6.38245 +21 +-2.30927 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38245 +20 +-2.30927 +11 +6.38259 +21 +-2.30976 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38259 +20 +-2.30976 +11 +6.38267 +21 +-2.30988 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38267 +20 +-2.30988 +11 +6.38455 +21 +-2.31738 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38455 +20 +-2.31738 +11 +6.38459 +21 +-2.31796 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38459 +20 +-2.31796 +11 +6.38463 +21 +-2.31809 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38463 +20 +-2.31809 +11 +6.38463 +21 +-2.32747 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38463 +20 +-2.32747 +11 +6.38453 +21 +-2.32805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38453 +20 +-2.32805 +11 +6.38455 +21 +-2.32818 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38455 +20 +-2.32818 +11 +6.38267 +21 +-2.33568 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38267 +20 +-2.33568 +11 +6.38246 +21 +-2.33615 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38246 +20 +-2.33615 +11 +6.38245 +21 +-2.33629 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38245 +20 +-2.33629 +11 +6.38057 +21 +-2.34003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38057 +20 +-2.34003 +11 +6.38005 +21 +-2.34074 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38005 +20 +-2.34074 +11 +6.38002 +21 +-2.3408 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.38002 +20 +-2.3408 +11 +6.37814 +21 +-2.34268 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37814 +20 +-2.34268 +11 +6.37742 +21 +-2.34318 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37742 +20 +-2.34318 +11 +6.37738 +21 +-2.34323 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37738 +20 +-2.34323 +11 +6.37363 +21 +-2.3451 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37363 +20 +-2.3451 +11 +6.37264 +21 +-2.3454 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37264 +20 +-2.3454 +11 +6.37247 +21 +-2.34536 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37247 +20 +-2.34536 +11 +6.37231 +21 +-2.34542 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37231 +20 +-2.34542 +11 +6.36856 +21 +-2.34542 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36856 +20 +-2.34542 +11 +6.36755 +21 +-2.34524 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36755 +20 +-2.34524 +11 +6.36741 +21 +-2.34512 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36741 +20 +-2.34512 +11 +6.36724 +21 +-2.3451 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36724 +20 +-2.3451 +11 +6.36349 +21 +-2.34323 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36349 +20 +-2.34323 +11 +6.36278 +21 +-2.3427 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36278 +20 +-2.3427 +11 +6.36272 +21 +-2.34268 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36272 +20 +-2.34268 +11 +6.36085 +21 +-2.3408 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36085 +20 +-2.3408 +11 +6.36034 +21 +-2.34008 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36034 +20 +-2.34008 +11 +6.36029 +21 +-2.34003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36029 +20 +-2.34003 +11 +6.35842 +21 +-2.33629 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35842 +20 +-2.33629 +11 +6.35827 +21 +-2.3358 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35827 +20 +-2.3358 +11 +6.35819 +21 +-2.33568 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35819 +20 +-2.33568 +11 +6.35632 +21 +-2.32818 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35632 +20 +-2.32818 +11 +6.35628 +21 +-2.32759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35628 +20 +-2.32759 +11 +6.35623 +21 +-2.32747 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35623 +20 +-2.32747 +11 +6.35623 +21 +-2.31809 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35623 +20 +-2.31809 +11 +6.35633 +21 +-2.31751 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35633 +20 +-2.31751 +11 +6.35632 +21 +-2.31738 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35632 +20 +-2.31738 +11 +6.35819 +21 +-2.30988 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35819 +20 +-2.30988 +11 +6.3584 +21 +-2.30941 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3584 +20 +-2.30941 +11 +6.35842 +21 +-2.30927 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.35842 +20 +-2.30927 +11 +6.36029 +21 +-2.30552 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36029 +20 +-2.30552 +11 +6.36082 +21 +-2.30481 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36082 +20 +-2.30481 +11 +6.36085 +21 +-2.30476 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36085 +20 +-2.30476 +11 +6.36272 +21 +-2.30288 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36272 +20 +-2.30288 +11 +6.36344 +21 +-2.30237 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36344 +20 +-2.30237 +11 +6.36349 +21 +-2.30233 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36349 +20 +-2.30233 +11 +6.36724 +21 +-2.30045 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36724 +20 +-2.30045 +11 +6.36822 +21 +-2.30016 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36822 +20 +-2.30016 +11 +6.36839 +21 +-2.3002 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36839 +20 +-2.3002 +11 +6.36856 +21 +-2.30014 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36856 +20 +-2.30014 +11 +6.37231 +21 +-2.30014 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37231 +20 +-2.30014 +11 +6.37332 +21 +-2.30032 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36656 +20 +-2.3074 +11 +6.36536 +21 +-2.30859 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36536 +20 +-2.30859 +11 +6.36384 +21 +-2.31162 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36384 +20 +-2.31162 +11 +6.36214 +21 +-2.31846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36214 +20 +-2.31846 +11 +6.36214 +21 +-2.3271 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36214 +20 +-2.3271 +11 +6.36384 +21 +-2.33393 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36384 +20 +-2.33393 +11 +6.36536 +21 +-2.33697 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36536 +20 +-2.33697 +11 +6.36656 +21 +-2.33816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36656 +20 +-2.33816 +11 +6.36925 +21 +-2.33951 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36925 +20 +-2.33951 +11 +6.37161 +21 +-2.33951 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37161 +20 +-2.33951 +11 +6.37431 +21 +-2.33816 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37431 +20 +-2.33816 +11 +6.3755 +21 +-2.33697 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3755 +20 +-2.33697 +11 +6.37702 +21 +-2.33393 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37702 +20 +-2.33393 +11 +6.37873 +21 +-2.3271 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37873 +20 +-2.3271 +11 +6.37873 +21 +-2.31846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37873 +20 +-2.31846 +11 +6.37702 +21 +-2.31162 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37702 +20 +-2.31162 +11 +6.3755 +21 +-2.30859 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3755 +20 +-2.30859 +11 +6.37431 +21 +-2.3074 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37431 +20 +-2.3074 +11 +6.37161 +21 +-2.30605 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.37161 +20 +-2.30605 +11 +6.36925 +21 +-2.30605 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.36925 +20 +-2.30605 +11 +6.36656 +21 +-2.3074 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33328 +20 +-2.30022 +11 +6.33345 +21 +-2.30019 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33345 +20 +-2.30019 +11 +6.33419 +21 +-2.30061 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33419 +20 +-2.30061 +11 +6.33498 +21 +-2.30096 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33498 +20 +-2.30096 +11 +6.33505 +21 +-2.30111 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33505 +20 +-2.30111 +11 +6.3352 +21 +-2.3012 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3352 +20 +-2.3012 +11 +6.33549 +21 +-2.302 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33549 +20 +-2.302 +11 +6.33587 +21 +-2.30277 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33587 +20 +-2.30277 +11 +6.33583 +21 +-2.30293 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33583 +20 +-2.30293 +11 +6.33589 +21 +-2.30309 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33589 +20 +-2.30309 +11 +6.33589 +21 +-2.33951 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33589 +20 +-2.33951 +11 +6.34419 +21 +-2.33951 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34419 +20 +-2.33951 +11 +6.3452 +21 +-2.33969 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3452 +20 +-2.33969 +11 +6.34674 +21 +-2.34099 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34674 +20 +-2.34099 +11 +6.34709 +21 +-2.34298 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34709 +20 +-2.34298 +11 +6.34608 +21 +-2.34473 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34608 +20 +-2.34473 +11 +6.34419 +21 +-2.34542 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.34419 +20 +-2.34542 +11 +6.32169 +21 +-2.34542 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32169 +20 +-2.34542 +11 +6.32068 +21 +-2.34524 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32068 +20 +-2.34524 +11 +6.31913 +21 +-2.34394 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31913 +20 +-2.34394 +11 +6.31878 +21 +-2.34195 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31878 +20 +-2.34195 +11 +6.31979 +21 +-2.3402 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31979 +20 +-2.3402 +11 +6.32169 +21 +-2.33951 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32169 +20 +-2.33951 +11 +6.32998 +21 +-2.33951 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32998 +20 +-2.33951 +11 +6.32998 +21 +-2.3121 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32998 +20 +-2.3121 +11 +6.32753 +21 +-2.31456 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32753 +20 +-2.31456 +11 +6.3268 +21 +-2.31506 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3268 +20 +-2.31506 +11 +6.32676 +21 +-2.31511 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32676 +20 +-2.31511 +11 +6.32301 +21 +-2.31698 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32301 +20 +-2.31698 +11 +6.32203 +21 +-2.31728 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32203 +20 +-2.31728 +11 +6.32006 +21 +-2.31681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32006 +20 +-2.31681 +11 +6.31886 +21 +-2.31518 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31886 +20 +-2.31518 +11 +6.31898 +21 +-2.31317 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.31898 +20 +-2.31317 +11 +6.32037 +21 +-2.3117 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32037 +20 +-2.3117 +11 +6.32369 +21 +-2.31004 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32369 +20 +-2.31004 +11 +6.32689 +21 +-2.30684 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.32689 +20 +-2.30684 +11 +6.33048 +21 +-2.30146 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33048 +20 +-2.30146 +11 +6.33119 +21 +-2.30071 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33119 +20 +-2.30071 +11 +6.33135 +21 +-2.30067 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33135 +20 +-2.30067 +11 +6.33146 +21 +-2.30054 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33146 +20 +-2.30054 +11 +6.3323 +21 +-2.30039 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3323 +20 +-2.30039 +11 +6.33313 +21 +-2.30015 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.33313 +20 +-2.30015 +11 +6.33328 +21 +-2.30022 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3002 +20 +-2.30032 +11 +6.30034 +21 +-2.30043 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30034 +20 +-2.30043 +11 +6.30051 +21 +-2.30045 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30051 +20 +-2.30045 +11 +6.30426 +21 +-2.30233 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30426 +20 +-2.30233 +11 +6.30497 +21 +-2.30285 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30497 +20 +-2.30285 +11 +6.30503 +21 +-2.30288 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30503 +20 +-2.30288 +11 +6.3069 +21 +-2.30476 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3069 +20 +-2.30476 +11 +6.30741 +21 +-2.30548 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30741 +20 +-2.30548 +11 +6.30746 +21 +-2.30552 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30746 +20 +-2.30552 +11 +6.30933 +21 +-2.30927 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30933 +20 +-2.30927 +11 +6.30962 +21 +-2.31026 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30962 +20 +-2.31026 +11 +6.30958 +21 +-2.31043 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30958 +20 +-2.31043 +11 +6.30964 +21 +-2.31059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30964 +20 +-2.31059 +11 +6.30964 +21 +-2.31622 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30964 +20 +-2.31622 +11 +6.30947 +21 +-2.31723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30947 +20 +-2.31723 +11 +6.30935 +21 +-2.31736 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30935 +20 +-2.31736 +11 +6.30933 +21 +-2.31754 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30933 +20 +-2.31754 +11 +6.30746 +21 +-2.32129 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30746 +20 +-2.32129 +11 +6.30693 +21 +-2.322 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30693 +20 +-2.322 +11 +6.3069 +21 +-2.32205 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.3069 +20 +-2.32205 +11 +6.30503 +21 +-2.32393 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30503 +20 +-2.32393 +11 +6.30431 +21 +-2.32444 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30431 +20 +-2.32444 +11 +6.30426 +21 +-2.32448 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30426 +20 +-2.32448 +11 +6.30051 +21 +-2.32636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30051 +20 +-2.32636 +11 +6.29953 +21 +-2.32665 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29953 +20 +-2.32665 +11 +6.29936 +21 +-2.32661 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29936 +20 +-2.32661 +11 +6.29923 +21 +-2.32666 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29923 +20 +-2.32666 +11 +6.30911 +21 +-2.34077 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30911 +20 +-2.34077 +11 +6.30954 +21 +-2.3417 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30954 +20 +-2.3417 +11 +6.30937 +21 +-2.34371 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30937 +20 +-2.34371 +11 +6.30794 +21 +-2.34514 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30794 +20 +-2.34514 +11 +6.30593 +21 +-2.34532 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30593 +20 +-2.34532 +11 +6.30427 +21 +-2.34416 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30427 +20 +-2.34416 +11 +6.29203 +21 +-2.32667 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29203 +20 +-2.32667 +11 +6.28715 +21 +-2.32667 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28715 +20 +-2.32667 +11 +6.28715 +21 +-2.34246 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28715 +20 +-2.34246 +11 +6.28697 +21 +-2.34347 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28697 +20 +-2.34347 +11 +6.28567 +21 +-2.34502 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28567 +20 +-2.34502 +11 +6.28368 +21 +-2.34537 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28368 +20 +-2.34537 +11 +6.28193 +21 +-2.34436 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28193 +20 +-2.34436 +11 +6.28124 +21 +-2.34246 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28124 +20 +-2.34246 +11 +6.28124 +21 +-2.30309 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28124 +20 +-2.30309 +11 +6.28131 +21 +-2.30271 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28131 +20 +-2.30271 +11 +6.28129 +21 +-2.30258 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28129 +20 +-2.30258 +11 +6.28135 +21 +-2.30247 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28135 +20 +-2.30247 +11 +6.28142 +21 +-2.30208 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28142 +20 +-2.30208 +11 +6.28191 +21 +-2.3015 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28191 +20 +-2.3015 +11 +6.2823 +21 +-2.30083 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.2823 +20 +-2.30083 +11 +6.28255 +21 +-2.30074 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28255 +20 +-2.30074 +11 +6.28272 +21 +-2.30054 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28272 +20 +-2.30054 +11 +6.28347 +21 +-2.3004 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28347 +20 +-2.3004 +11 +6.28419 +21 +-2.30014 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28419 +20 +-2.30014 +11 +6.29919 +21 +-2.30014 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29919 +20 +-2.30014 +11 +6.3002 +21 +-2.30032 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28715 +20 +-2.32076 +11 +6.29849 +21 +-2.32076 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29849 +20 +-2.32076 +11 +6.30119 +21 +-2.31941 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30119 +20 +-2.31941 +11 +6.30239 +21 +-2.31822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30239 +20 +-2.31822 +11 +6.30374 +21 +-2.31552 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30374 +20 +-2.31552 +11 +6.30374 +21 +-2.31129 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30374 +20 +-2.31129 +11 +6.30239 +21 +-2.30859 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30239 +20 +-2.30859 +11 +6.30119 +21 +-2.3074 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.30119 +20 +-2.3074 +11 +6.29849 +21 +-2.30605 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.29849 +20 +-2.30605 +11 +6.28715 +21 +-2.30605 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.28715 +20 +-2.30605 +11 +6.28715 +21 +-2.32076 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81519 +20 +-2.27232 +11 +5.81533 +21 +-2.27243 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81533 +20 +-2.27243 +11 +5.8155 +21 +-2.27245 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8155 +20 +-2.27245 +11 +5.81925 +21 +-2.27433 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81925 +20 +-2.27433 +11 +5.81996 +21 +-2.27485 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81996 +20 +-2.27485 +11 +5.82002 +21 +-2.27488 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82002 +20 +-2.27488 +11 +5.82189 +21 +-2.27676 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82189 +20 +-2.27676 +11 +5.8224 +21 +-2.27748 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8224 +20 +-2.27748 +11 +5.82245 +21 +-2.27752 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82245 +20 +-2.27752 +11 +5.82432 +21 +-2.28127 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82432 +20 +-2.28127 +11 +5.82461 +21 +-2.28226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82461 +20 +-2.28226 +11 +5.82457 +21 +-2.28243 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82457 +20 +-2.28243 +11 +5.82463 +21 +-2.28259 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82463 +20 +-2.28259 +11 +5.82463 +21 +-2.29759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82463 +20 +-2.29759 +11 +5.82453 +21 +-2.29817 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82453 +20 +-2.29817 +11 +5.82455 +21 +-2.29831 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82455 +20 +-2.29831 +11 +5.82267 +21 +-2.30581 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82267 +20 +-2.30581 +11 +5.82227 +21 +-2.30671 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82227 +20 +-2.30671 +11 +5.82226 +21 +-2.30673 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.82226 +20 +-2.30673 +11 +5.81851 +21 +-2.31235 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81851 +20 +-2.31235 +11 +5.8182 +21 +-2.31268 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8182 +20 +-2.31268 +11 +5.81814 +21 +-2.3128 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81814 +20 +-2.3128 +11 +5.81627 +21 +-2.31468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81627 +20 +-2.31468 +11 +5.81555 +21 +-2.31518 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81555 +20 +-2.31518 +11 +5.8155 +21 +-2.31523 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8155 +20 +-2.31523 +11 +5.81175 +21 +-2.3171 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81175 +20 +-2.3171 +11 +5.81077 +21 +-2.3174 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81077 +20 +-2.3174 +11 +5.8106 +21 +-2.31736 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8106 +20 +-2.31736 +11 +5.81043 +21 +-2.31742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81043 +20 +-2.31742 +11 +5.80293 +21 +-2.31742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80293 +20 +-2.31742 +11 +5.80192 +21 +-2.31724 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80192 +20 +-2.31724 +11 +5.80038 +21 +-2.31594 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80038 +20 +-2.31594 +11 +5.80003 +21 +-2.31395 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80003 +20 +-2.31395 +11 +5.80104 +21 +-2.3122 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80104 +20 +-2.3122 +11 +5.80293 +21 +-2.31151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80293 +20 +-2.31151 +11 +5.80974 +21 +-2.31151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80974 +20 +-2.31151 +11 +5.81243 +21 +-2.31016 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81243 +20 +-2.31016 +11 +5.81376 +21 +-2.30883 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81376 +20 +-2.30883 +11 +5.81707 +21 +-2.30388 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81707 +20 +-2.30388 +11 +5.8178 +21 +-2.30096 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8178 +20 +-2.30096 +11 +5.8155 +21 +-2.30211 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8155 +20 +-2.30211 +11 +5.81452 +21 +-2.3024 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81452 +20 +-2.3024 +11 +5.81435 +21 +-2.30236 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81435 +20 +-2.30236 +11 +5.81418 +21 +-2.30242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81418 +20 +-2.30242 +11 +5.80668 +21 +-2.30242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80668 +20 +-2.30242 +11 +5.80567 +21 +-2.30224 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80567 +20 +-2.30224 +11 +5.80554 +21 +-2.30213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80554 +20 +-2.30213 +11 +5.80536 +21 +-2.30211 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80536 +20 +-2.30211 +11 +5.80161 +21 +-2.30023 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80161 +20 +-2.30023 +11 +5.8009 +21 +-2.29971 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.8009 +20 +-2.29971 +11 +5.80085 +21 +-2.29968 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80085 +20 +-2.29968 +11 +5.79897 +21 +-2.2978 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79897 +20 +-2.2978 +11 +5.79846 +21 +-2.29708 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79846 +20 +-2.29708 +11 +5.79842 +21 +-2.29704 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79842 +20 +-2.29704 +11 +5.79654 +21 +-2.29329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79654 +20 +-2.29329 +11 +5.79625 +21 +-2.2923 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79625 +20 +-2.2923 +11 +5.79629 +21 +-2.29213 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79629 +20 +-2.29213 +11 +5.79623 +21 +-2.29197 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79623 +20 +-2.29197 +11 +5.79623 +21 +-2.28259 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79623 +20 +-2.28259 +11 +5.79641 +21 +-2.28158 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79641 +20 +-2.28158 +11 +5.79652 +21 +-2.28145 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79652 +20 +-2.28145 +11 +5.79654 +21 +-2.28127 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79654 +20 +-2.28127 +11 +5.79842 +21 +-2.27752 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79842 +20 +-2.27752 +11 +5.79894 +21 +-2.27681 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79894 +20 +-2.27681 +11 +5.79897 +21 +-2.27676 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.79897 +20 +-2.27676 +11 +5.80085 +21 +-2.27488 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80085 +20 +-2.27488 +11 +5.80157 +21 +-2.27437 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80157 +20 +-2.27437 +11 +5.80161 +21 +-2.27433 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80161 +20 +-2.27433 +11 +5.80536 +21 +-2.27245 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80536 +20 +-2.27245 +11 +5.80635 +21 +-2.27216 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80635 +20 +-2.27216 +11 +5.80652 +21 +-2.2722 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80652 +20 +-2.2722 +11 +5.80668 +21 +-2.27214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80668 +20 +-2.27214 +11 +5.81418 +21 +-2.27214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81418 +20 +-2.27214 +11 +5.81519 +21 +-2.27232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80468 +20 +-2.2794 +11 +5.80349 +21 +-2.28059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80349 +20 +-2.28059 +11 +5.80214 +21 +-2.28329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80214 +20 +-2.28329 +11 +5.80214 +21 +-2.29127 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80214 +20 +-2.29127 +11 +5.80349 +21 +-2.29397 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80349 +20 +-2.29397 +11 +5.80468 +21 +-2.29516 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80468 +20 +-2.29516 +11 +5.80738 +21 +-2.29651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80738 +20 +-2.29651 +11 +5.81349 +21 +-2.29651 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81349 +20 +-2.29651 +11 +5.81618 +21 +-2.29516 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81618 +20 +-2.29516 +11 +5.81738 +21 +-2.29397 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81738 +20 +-2.29397 +11 +5.81873 +21 +-2.29127 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81873 +20 +-2.29127 +11 +5.81873 +21 +-2.28329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81873 +20 +-2.28329 +11 +5.81738 +21 +-2.28059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81738 +20 +-2.28059 +11 +5.81618 +21 +-2.2794 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81618 +20 +-2.2794 +11 +5.81349 +21 +-2.27805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.81349 +20 +-2.27805 +11 +5.80738 +21 +-2.27805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.80738 +20 +-2.27805 +11 +5.80468 +21 +-2.2794 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77328 +20 +-2.27222 +11 +5.77345 +21 +-2.27219 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77345 +20 +-2.27219 +11 +5.77419 +21 +-2.27261 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77419 +20 +-2.27261 +11 +5.77498 +21 +-2.27296 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77498 +20 +-2.27296 +11 +5.77505 +21 +-2.27311 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77505 +20 +-2.27311 +11 +5.7752 +21 +-2.2732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7752 +20 +-2.2732 +11 +5.77549 +21 +-2.274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77549 +20 +-2.274 +11 +5.77587 +21 +-2.27477 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77587 +20 +-2.27477 +11 +5.77583 +21 +-2.27493 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77583 +20 +-2.27493 +11 +5.77589 +21 +-2.27509 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77589 +20 +-2.27509 +11 +5.77589 +21 +-2.31151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77589 +20 +-2.31151 +11 +5.78419 +21 +-2.31151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78419 +20 +-2.31151 +11 +5.7852 +21 +-2.31169 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7852 +20 +-2.31169 +11 +5.78674 +21 +-2.31299 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78674 +20 +-2.31299 +11 +5.78709 +21 +-2.31498 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78709 +20 +-2.31498 +11 +5.78608 +21 +-2.31673 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78608 +20 +-2.31673 +11 +5.78419 +21 +-2.31742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.78419 +20 +-2.31742 +11 +5.76169 +21 +-2.31742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76169 +20 +-2.31742 +11 +5.76068 +21 +-2.31724 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76068 +20 +-2.31724 +11 +5.75913 +21 +-2.31594 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75913 +20 +-2.31594 +11 +5.75878 +21 +-2.31395 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75878 +20 +-2.31395 +11 +5.75979 +21 +-2.3122 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75979 +20 +-2.3122 +11 +5.76169 +21 +-2.31151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76169 +20 +-2.31151 +11 +5.76998 +21 +-2.31151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76998 +20 +-2.31151 +11 +5.76998 +21 +-2.2841 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76998 +20 +-2.2841 +11 +5.76753 +21 +-2.28656 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76753 +20 +-2.28656 +11 +5.7668 +21 +-2.28706 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7668 +20 +-2.28706 +11 +5.76676 +21 +-2.28711 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76676 +20 +-2.28711 +11 +5.76301 +21 +-2.28898 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76301 +20 +-2.28898 +11 +5.76203 +21 +-2.28928 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76203 +20 +-2.28928 +11 +5.76006 +21 +-2.28881 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76006 +20 +-2.28881 +11 +5.75886 +21 +-2.28718 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75886 +20 +-2.28718 +11 +5.75898 +21 +-2.28517 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.75898 +20 +-2.28517 +11 +5.76037 +21 +-2.2837 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76037 +20 +-2.2837 +11 +5.76369 +21 +-2.28204 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76369 +20 +-2.28204 +11 +5.76689 +21 +-2.27884 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.76689 +20 +-2.27884 +11 +5.77048 +21 +-2.27346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77048 +20 +-2.27346 +11 +5.77119 +21 +-2.27271 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77119 +20 +-2.27271 +11 +5.77135 +21 +-2.27267 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77135 +20 +-2.27267 +11 +5.77146 +21 +-2.27254 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77146 +20 +-2.27254 +11 +5.7723 +21 +-2.27239 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7723 +20 +-2.27239 +11 +5.77313 +21 +-2.27215 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.77313 +20 +-2.27215 +11 +5.77328 +21 +-2.27222 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74006 +20 +-2.27229 +11 +5.74013 +21 +-2.27229 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74013 +20 +-2.27229 +11 +5.74575 +21 +-2.27417 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74575 +20 +-2.27417 +11 +5.74665 +21 +-2.27466 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74665 +20 +-2.27466 +11 +5.74674 +21 +-2.27481 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74674 +20 +-2.27481 +11 +5.7469 +21 +-2.27488 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7469 +20 +-2.27488 +11 +5.74878 +21 +-2.27676 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74878 +20 +-2.27676 +11 +5.74937 +21 +-2.2776 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74937 +20 +-2.2776 +11 +5.74954 +21 +-2.27961 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74954 +20 +-2.27961 +11 +5.74838 +21 +-2.28126 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74838 +20 +-2.28126 +11 +5.74643 +21 +-2.28178 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74643 +20 +-2.28178 +11 +5.7446 +21 +-2.28093 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7446 +20 +-2.28093 +11 +5.74322 +21 +-2.27955 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74322 +20 +-2.27955 +11 +5.73871 +21 +-2.27805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73871 +20 +-2.27805 +11 +5.73592 +21 +-2.27805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73592 +20 +-2.27805 +11 +5.73141 +21 +-2.27955 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73141 +20 +-2.27955 +11 +5.72849 +21 +-2.28247 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72849 +20 +-2.28247 +11 +5.72698 +21 +-2.2855 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72698 +20 +-2.2855 +11 +5.72527 +21 +-2.29233 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72527 +20 +-2.29233 +11 +5.72527 +21 +-2.29723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72527 +20 +-2.29723 +11 +5.72698 +21 +-2.30406 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72698 +20 +-2.30406 +11 +5.72849 +21 +-2.30709 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72849 +20 +-2.30709 +11 +5.73141 +21 +-2.31001 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73141 +20 +-2.31001 +11 +5.73592 +21 +-2.31151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73592 +20 +-2.31151 +11 +5.73871 +21 +-2.31151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73871 +20 +-2.31151 +11 +5.74322 +21 +-2.31001 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74322 +20 +-2.31001 +11 +5.7446 +21 +-2.30863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7446 +20 +-2.30863 +11 +5.74544 +21 +-2.30804 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74544 +20 +-2.30804 +11 +5.74745 +21 +-2.30786 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74745 +20 +-2.30786 +11 +5.74911 +21 +-2.30902 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74911 +20 +-2.30902 +11 +5.74963 +21 +-2.31097 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74963 +20 +-2.31097 +11 +5.74878 +21 +-2.3128 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74878 +20 +-2.3128 +11 +5.7469 +21 +-2.31468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.7469 +20 +-2.31468 +11 +5.74606 +21 +-2.31527 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74606 +20 +-2.31527 +11 +5.74589 +21 +-2.31528 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74589 +20 +-2.31528 +11 +5.74575 +21 +-2.31539 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74575 +20 +-2.31539 +11 +5.74013 +21 +-2.31726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.74013 +20 +-2.31726 +11 +5.73925 +21 +-2.31739 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73925 +20 +-2.31739 +11 +5.73919 +21 +-2.31742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73919 +20 +-2.31742 +11 +5.73544 +21 +-2.31742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73544 +20 +-2.31742 +11 +5.73457 +21 +-2.31726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73457 +20 +-2.31726 +11 +5.73451 +21 +-2.31726 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73451 +20 +-2.31726 +11 +5.72888 +21 +-2.31539 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72888 +20 +-2.31539 +11 +5.72798 +21 +-2.3149 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72798 +20 +-2.3149 +11 +5.72789 +21 +-2.31475 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72789 +20 +-2.31475 +11 +5.72773 +21 +-2.31468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72773 +20 +-2.31468 +11 +5.72398 +21 +-2.31093 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72398 +20 +-2.31093 +11 +5.72347 +21 +-2.3102 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72347 +20 +-2.3102 +11 +5.72343 +21 +-2.31016 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72343 +20 +-2.31016 +11 +5.72155 +21 +-2.30641 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72155 +20 +-2.30641 +11 +5.72141 +21 +-2.30592 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72141 +20 +-2.30592 +11 +5.72133 +21 +-2.30581 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72133 +20 +-2.30581 +11 +5.71945 +21 +-2.29831 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71945 +20 +-2.29831 +11 +5.71941 +21 +-2.29772 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71941 +20 +-2.29772 +11 +5.71937 +21 +-2.29759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71937 +20 +-2.29759 +11 +5.71937 +21 +-2.29197 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71937 +20 +-2.29197 +11 +5.71947 +21 +-2.29139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71947 +20 +-2.29139 +11 +5.71945 +21 +-2.29125 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.71945 +20 +-2.29125 +11 +5.72133 +21 +-2.28375 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72133 +20 +-2.28375 +11 +5.72154 +21 +-2.28329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72154 +20 +-2.28329 +11 +5.72155 +21 +-2.28315 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72155 +20 +-2.28315 +11 +5.72343 +21 +-2.2794 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72343 +20 +-2.2794 +11 +5.72395 +21 +-2.27869 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72395 +20 +-2.27869 +11 +5.72398 +21 +-2.27863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72398 +20 +-2.27863 +11 +5.72773 +21 +-2.27488 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72773 +20 +-2.27488 +11 +5.72857 +21 +-2.27429 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72857 +20 +-2.27429 +11 +5.72875 +21 +-2.27428 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72875 +20 +-2.27428 +11 +5.72888 +21 +-2.27417 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.72888 +20 +-2.27417 +11 +5.73451 +21 +-2.27229 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73451 +20 +-2.27229 +11 +5.73538 +21 +-2.27216 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73538 +20 +-2.27216 +11 +5.73544 +21 +-2.27214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73544 +20 +-2.27214 +11 +5.73919 +21 +-2.27214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.73919 +20 +-2.27214 +11 +5.74006 +21 +-2.27229 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17512 +20 +-2.26222 +11 +6.17525 +21 +-2.2622 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17525 +20 +-2.2622 +11 +6.17536 +21 +-2.26226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17536 +20 +-2.26226 +11 +6.17569 +21 +-2.26232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17569 +20 +-2.26232 +11 +6.1763 +21 +-2.26283 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1763 +20 +-2.26283 +11 +6.17698 +21 +-2.26324 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17698 +20 +-2.26324 +11 +6.17706 +21 +-2.26347 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17706 +20 +-2.26347 +11 +6.17724 +21 +-2.26362 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17724 +20 +-2.26362 +11 +6.17738 +21 +-2.2644 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17738 +20 +-2.2644 +11 +6.17763 +21 +-2.26515 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17763 +20 +-2.26515 +11 +6.17755 +21 +-2.26537 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17755 +20 +-2.26537 +11 +6.17759 +21 +-2.26561 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17759 +20 +-2.26561 +11 +6.17719 +21 +-2.2663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17719 +20 +-2.2663 +11 +6.1769 +21 +-2.26704 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1769 +20 +-2.26704 +11 +6.16795 +21 +-2.27727 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16795 +20 +-2.27727 +11 +6.16819 +21 +-2.27732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16819 +20 +-2.27732 +11 +6.16833 +21 +-2.27743 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16833 +20 +-2.27743 +11 +6.1685 +21 +-2.27745 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1685 +20 +-2.27745 +11 +6.17225 +21 +-2.27933 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17225 +20 +-2.27933 +11 +6.17296 +21 +-2.27985 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17296 +20 +-2.27985 +11 +6.17302 +21 +-2.27988 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17302 +20 +-2.27988 +11 +6.17489 +21 +-2.28175 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17489 +20 +-2.28175 +11 +6.1754 +21 +-2.28248 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1754 +20 +-2.28248 +11 +6.17545 +21 +-2.28252 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17545 +20 +-2.28252 +11 +6.17732 +21 +-2.28627 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17732 +20 +-2.28627 +11 +6.17761 +21 +-2.28725 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17761 +20 +-2.28725 +11 +6.17757 +21 +-2.28742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17757 +20 +-2.28742 +11 +6.17763 +21 +-2.28759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17763 +20 +-2.28759 +11 +6.17763 +21 +-2.29696 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17763 +20 +-2.29696 +11 +6.17746 +21 +-2.29797 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17746 +20 +-2.29797 +11 +6.17734 +21 +-2.29811 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17734 +20 +-2.29811 +11 +6.17732 +21 +-2.29829 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17732 +20 +-2.29829 +11 +6.17545 +21 +-2.30203 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17545 +20 +-2.30203 +11 +6.17492 +21 +-2.30274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17492 +20 +-2.30274 +11 +6.17489 +21 +-2.3028 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17489 +20 +-2.3028 +11 +6.17302 +21 +-2.30468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17302 +20 +-2.30468 +11 +6.1723 +21 +-2.30518 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1723 +20 +-2.30518 +11 +6.17225 +21 +-2.30523 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17225 +20 +-2.30523 +11 +6.1685 +21 +-2.3071 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1685 +20 +-2.3071 +11 +6.16752 +21 +-2.3074 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16752 +20 +-2.3074 +11 +6.16735 +21 +-2.30736 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16735 +20 +-2.30736 +11 +6.16718 +21 +-2.30742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16718 +20 +-2.30742 +11 +6.15593 +21 +-2.30742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15593 +20 +-2.30742 +11 +6.15492 +21 +-2.30724 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15492 +20 +-2.30724 +11 +6.15479 +21 +-2.30712 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15479 +20 +-2.30712 +11 +6.15461 +21 +-2.3071 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15461 +20 +-2.3071 +11 +6.15086 +21 +-2.30523 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15086 +20 +-2.30523 +11 +6.15015 +21 +-2.3047 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15015 +20 +-2.3047 +11 +6.1501 +21 +-2.30468 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1501 +20 +-2.30468 +11 +6.14822 +21 +-2.3028 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14822 +20 +-2.3028 +11 +6.14763 +21 +-2.30196 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14763 +20 +-2.30196 +11 +6.14746 +21 +-2.29995 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14746 +20 +-2.29995 +11 +6.14862 +21 +-2.2983 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14862 +20 +-2.2983 +11 +6.15057 +21 +-2.29777 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15057 +20 +-2.29777 +11 +6.1524 +21 +-2.29863 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1524 +20 +-2.29863 +11 +6.15393 +21 +-2.30016 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15393 +20 +-2.30016 +11 +6.15663 +21 +-2.30151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15663 +20 +-2.30151 +11 +6.16649 +21 +-2.30151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16649 +20 +-2.30151 +11 +6.16918 +21 +-2.30016 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16918 +20 +-2.30016 +11 +6.17038 +21 +-2.29897 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17038 +20 +-2.29897 +11 +6.17173 +21 +-2.29627 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17173 +20 +-2.29627 +11 +6.17173 +21 +-2.28829 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17173 +20 +-2.28829 +11 +6.17038 +21 +-2.28559 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17038 +20 +-2.28559 +11 +6.16918 +21 +-2.28439 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16918 +20 +-2.28439 +11 +6.16649 +21 +-2.28304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16649 +20 +-2.28304 +11 +6.16156 +21 +-2.28304 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16156 +20 +-2.28304 +11 +6.16112 +21 +-2.28297 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16112 +20 +-2.28297 +11 +6.16099 +21 +-2.28299 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16099 +20 +-2.28299 +11 +6.16088 +21 +-2.28293 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16088 +20 +-2.28293 +11 +6.16055 +21 +-2.28287 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16055 +20 +-2.28287 +11 +6.15994 +21 +-2.28235 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15994 +20 +-2.28235 +11 +6.15926 +21 +-2.28194 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15926 +20 +-2.28194 +11 +6.15918 +21 +-2.28172 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15918 +20 +-2.28172 +11 +6.159 +21 +-2.28157 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.159 +20 +-2.28157 +11 +6.15886 +21 +-2.28078 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15886 +20 +-2.28078 +11 +6.15861 +21 +-2.28003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15861 +20 +-2.28003 +11 +6.15869 +21 +-2.27981 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15869 +20 +-2.27981 +11 +6.15865 +21 +-2.27958 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15865 +20 +-2.27958 +11 +6.15905 +21 +-2.27889 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15905 +20 +-2.27889 +11 +6.15934 +21 +-2.27815 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15934 +20 +-2.27815 +11 +6.16817 +21 +-2.26805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.16817 +20 +-2.26805 +11 +6.15031 +21 +-2.26805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15031 +20 +-2.26805 +11 +6.1493 +21 +-2.26787 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1493 +20 +-2.26787 +11 +6.14775 +21 +-2.26657 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14775 +20 +-2.26657 +11 +6.1474 +21 +-2.26458 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1474 +20 +-2.26458 +11 +6.14841 +21 +-2.26283 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14841 +20 +-2.26283 +11 +6.15031 +21 +-2.26214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.15031 +20 +-2.26214 +11 +6.17468 +21 +-2.26214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.17468 +20 +-2.26214 +11 +6.17512 +21 +-2.26222 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12628 +20 +-2.26222 +11 +6.12645 +21 +-2.26219 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12645 +20 +-2.26219 +11 +6.12719 +21 +-2.26261 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12719 +20 +-2.26261 +11 +6.12798 +21 +-2.26296 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12798 +20 +-2.26296 +11 +6.12805 +21 +-2.26311 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12805 +20 +-2.26311 +11 +6.1282 +21 +-2.2632 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1282 +20 +-2.2632 +11 +6.12849 +21 +-2.264 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12849 +20 +-2.264 +11 +6.12887 +21 +-2.26477 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12887 +20 +-2.26477 +11 +6.12883 +21 +-2.26493 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12883 +20 +-2.26493 +11 +6.12889 +21 +-2.26509 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12889 +20 +-2.26509 +11 +6.12889 +21 +-2.30151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12889 +20 +-2.30151 +11 +6.13719 +21 +-2.30151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13719 +20 +-2.30151 +11 +6.1382 +21 +-2.30169 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1382 +20 +-2.30169 +11 +6.13974 +21 +-2.30299 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13974 +20 +-2.30299 +11 +6.14009 +21 +-2.30498 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.14009 +20 +-2.30498 +11 +6.13908 +21 +-2.30673 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13908 +20 +-2.30673 +11 +6.13719 +21 +-2.30742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.13719 +20 +-2.30742 +11 +6.11469 +21 +-2.30742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11469 +20 +-2.30742 +11 +6.11368 +21 +-2.30724 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11368 +20 +-2.30724 +11 +6.11213 +21 +-2.30594 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11213 +20 +-2.30594 +11 +6.11178 +21 +-2.30395 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11178 +20 +-2.30395 +11 +6.11279 +21 +-2.3022 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11279 +20 +-2.3022 +11 +6.11469 +21 +-2.30151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11469 +20 +-2.30151 +11 +6.12298 +21 +-2.30151 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12298 +20 +-2.30151 +11 +6.12298 +21 +-2.2741 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12298 +20 +-2.2741 +11 +6.12053 +21 +-2.27656 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12053 +20 +-2.27656 +11 +6.1198 +21 +-2.27706 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1198 +20 +-2.27706 +11 +6.11976 +21 +-2.27711 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11976 +20 +-2.27711 +11 +6.11601 +21 +-2.27898 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11601 +20 +-2.27898 +11 +6.11503 +21 +-2.27928 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11503 +20 +-2.27928 +11 +6.11306 +21 +-2.27881 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11306 +20 +-2.27881 +11 +6.11186 +21 +-2.27718 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11186 +20 +-2.27718 +11 +6.11198 +21 +-2.27517 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11198 +20 +-2.27517 +11 +6.11337 +21 +-2.2737 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11337 +20 +-2.2737 +11 +6.11669 +21 +-2.27204 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11669 +20 +-2.27204 +11 +6.11989 +21 +-2.26884 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.11989 +20 +-2.26884 +11 +6.12348 +21 +-2.26346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12348 +20 +-2.26346 +11 +6.12419 +21 +-2.26271 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12419 +20 +-2.26271 +11 +6.12435 +21 +-2.26267 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12435 +20 +-2.26267 +11 +6.12446 +21 +-2.26254 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12446 +20 +-2.26254 +11 +6.1253 +21 +-2.26239 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.1253 +20 +-2.26239 +11 +6.12613 +21 +-2.26215 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.12613 +20 +-2.26215 +11 +6.12628 +21 +-2.26222 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0932 +20 +-2.26232 +11 +6.09334 +21 +-2.26243 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09334 +20 +-2.26243 +11 +6.09351 +21 +-2.26245 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09351 +20 +-2.26245 +11 +6.09726 +21 +-2.26433 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09726 +20 +-2.26433 +11 +6.09797 +21 +-2.26485 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09797 +20 +-2.26485 +11 +6.09803 +21 +-2.26488 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09803 +20 +-2.26488 +11 +6.0999 +21 +-2.26676 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0999 +20 +-2.26676 +11 +6.10041 +21 +-2.26748 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10041 +20 +-2.26748 +11 +6.10046 +21 +-2.26752 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10046 +20 +-2.26752 +11 +6.10233 +21 +-2.27127 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10233 +20 +-2.27127 +11 +6.10262 +21 +-2.27226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10262 +20 +-2.27226 +11 +6.10258 +21 +-2.27243 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10258 +20 +-2.27243 +11 +6.10264 +21 +-2.27259 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10264 +20 +-2.27259 +11 +6.10264 +21 +-2.27822 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10264 +20 +-2.27822 +11 +6.10247 +21 +-2.27923 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10247 +20 +-2.27923 +11 +6.10235 +21 +-2.27936 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10235 +20 +-2.27936 +11 +6.10233 +21 +-2.27954 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10233 +20 +-2.27954 +11 +6.10046 +21 +-2.28329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10046 +20 +-2.28329 +11 +6.09993 +21 +-2.284 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09993 +20 +-2.284 +11 +6.0999 +21 +-2.28405 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0999 +20 +-2.28405 +11 +6.09803 +21 +-2.28593 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09803 +20 +-2.28593 +11 +6.09731 +21 +-2.28644 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09731 +20 +-2.28644 +11 +6.09726 +21 +-2.28648 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09726 +20 +-2.28648 +11 +6.09351 +21 +-2.28836 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09351 +20 +-2.28836 +11 +6.09253 +21 +-2.28865 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09253 +20 +-2.28865 +11 +6.09236 +21 +-2.28861 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09236 +20 +-2.28861 +11 +6.09223 +21 +-2.28866 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09223 +20 +-2.28866 +11 +6.10211 +21 +-2.30277 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10211 +20 +-2.30277 +11 +6.10254 +21 +-2.3037 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10254 +20 +-2.3037 +11 +6.10237 +21 +-2.30571 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10237 +20 +-2.30571 +11 +6.10094 +21 +-2.30714 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.10094 +20 +-2.30714 +11 +6.09893 +21 +-2.30732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09893 +20 +-2.30732 +11 +6.09727 +21 +-2.30616 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09727 +20 +-2.30616 +11 +6.08503 +21 +-2.28867 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08503 +20 +-2.28867 +11 +6.08015 +21 +-2.28867 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08015 +20 +-2.28867 +11 +6.08015 +21 +-2.30446 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08015 +20 +-2.30446 +11 +6.07997 +21 +-2.30547 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07997 +20 +-2.30547 +11 +6.07867 +21 +-2.30702 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07867 +20 +-2.30702 +11 +6.07668 +21 +-2.30737 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07668 +20 +-2.30737 +11 +6.07493 +21 +-2.30636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07493 +20 +-2.30636 +11 +6.07424 +21 +-2.30446 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07424 +20 +-2.30446 +11 +6.07424 +21 +-2.26509 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07424 +20 +-2.26509 +11 +6.07431 +21 +-2.26471 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07431 +20 +-2.26471 +11 +6.07429 +21 +-2.26458 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07429 +20 +-2.26458 +11 +6.07435 +21 +-2.26447 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07435 +20 +-2.26447 +11 +6.07442 +21 +-2.26408 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07442 +20 +-2.26408 +11 +6.07491 +21 +-2.2635 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07491 +20 +-2.2635 +11 +6.0753 +21 +-2.26283 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0753 +20 +-2.26283 +11 +6.07555 +21 +-2.26274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07555 +20 +-2.26274 +11 +6.07572 +21 +-2.26254 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07572 +20 +-2.26254 +11 +6.07647 +21 +-2.2624 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07647 +20 +-2.2624 +11 +6.07719 +21 +-2.26214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07719 +20 +-2.26214 +11 +6.09219 +21 +-2.26214 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09219 +20 +-2.26214 +11 +6.0932 +21 +-2.26232 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08015 +20 +-2.28276 +11 +6.09149 +21 +-2.28276 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09149 +20 +-2.28276 +11 +6.09419 +21 +-2.28141 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09419 +20 +-2.28141 +11 +6.09539 +21 +-2.28022 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09539 +20 +-2.28022 +11 +6.09674 +21 +-2.27752 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09674 +20 +-2.27752 +11 +6.09674 +21 +-2.27329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09674 +20 +-2.27329 +11 +6.09539 +21 +-2.27059 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09539 +20 +-2.27059 +11 +6.09419 +21 +-2.2694 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09419 +20 +-2.2694 +11 +6.09149 +21 +-2.26805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09149 +20 +-2.26805 +11 +6.08015 +21 +-2.26805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.08015 +20 +-2.26805 +11 +6.08015 +21 +-2.28276 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90696 +20 +-2.28939 +11 +5.90765 +21 +-2.29106 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90765 +20 +-2.29106 +11 +5.90696 +21 +-2.29273 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90696 +20 +-2.29273 +11 +5.90529 +21 +-2.29343 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90529 +20 +-2.29343 +11 +5.88471 +21 +-2.29343 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88471 +20 +-2.29343 +11 +5.88304 +21 +-2.29273 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88304 +20 +-2.29273 +11 +5.88235 +21 +-2.29106 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88235 +20 +-2.29106 +11 +5.88304 +21 +-2.28939 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88304 +20 +-2.28939 +11 +5.88471 +21 +-2.2887 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.88471 +20 +-2.2887 +11 +5.90529 +21 +-2.2887 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.90529 +20 +-2.2887 +11 +5.90696 +21 +-2.28939 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09561 +20 +-2.24727 +11 +6.0963 +21 +-2.24894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0963 +20 +-2.24894 +11 +6.09561 +21 +-2.25061 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09561 +20 +-2.25061 +11 +6.09394 +21 +-2.2513 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09394 +20 +-2.2513 +11 +6.07606 +21 +-2.2513 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07606 +20 +-2.2513 +11 +6.07439 +21 +-2.25061 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07439 +20 +-2.25061 +11 +6.0737 +21 +-2.24894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0737 +20 +-2.24894 +11 +6.07439 +21 +-2.24727 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07439 +20 +-2.24727 +11 +6.07606 +21 +-2.24657 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07606 +20 +-2.24657 +11 +6.09394 +21 +-2.24657 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09394 +20 +-2.24657 +11 +6.09561 +21 +-2.24727 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09561 +20 +-2.18939 +11 +6.0963 +21 +-2.19106 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0963 +20 +-2.19106 +11 +6.09561 +21 +-2.19273 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09561 +20 +-2.19273 +11 +6.09394 +21 +-2.19343 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09394 +20 +-2.19343 +11 +6.07606 +21 +-2.19343 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07606 +20 +-2.19343 +11 +6.07439 +21 +-2.19273 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07439 +20 +-2.19273 +11 +6.0737 +21 +-2.19106 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.0737 +20 +-2.19106 +11 +6.07439 +21 +-2.18939 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07439 +20 +-2.18939 +11 +6.07606 +21 +-2.1887 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.07606 +20 +-2.1887 +11 +6.09394 +21 +-2.1887 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.09394 +20 +-2.1887 +11 +6.09561 +21 +-2.18939 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.48831 +20 +-2.0235 +11 +6.4891 +21 +-2.01147 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4891 +20 +-2.01147 +11 +6.49145 +21 +-1.99965 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49145 +20 +-1.99965 +11 +6.49533 +21 +-1.98823 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49533 +20 +-1.98823 +11 +6.50066 +21 +-1.97742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50066 +20 +-1.97742 +11 +6.50735 +21 +-1.96739 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50735 +20 +-1.96739 +11 +6.5153 +21 +-1.95833 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5153 +20 +-1.95833 +11 +6.52437 +21 +-1.95038 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52437 +20 +-1.95038 +11 +6.53439 +21 +-1.94368 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53439 +20 +-1.94368 +11 +6.5452 +21 +-1.93835 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5452 +20 +-1.93835 +11 +6.55662 +21 +-1.93448 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55662 +20 +-1.93448 +11 +6.56844 +21 +-1.93212 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56844 +20 +-1.93212 +11 +6.58047 +21 +-1.93134 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58047 +20 +-1.93134 +11 +6.5925 +21 +-1.93212 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5925 +20 +-1.93212 +11 +6.60433 +21 +-1.93448 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60433 +20 +-1.93448 +11 +6.61574 +21 +-1.93835 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61574 +20 +-1.93835 +11 +6.62655 +21 +-1.94368 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62655 +20 +-1.94368 +11 +6.63658 +21 +-1.95038 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63658 +20 +-1.95038 +11 +6.64564 +21 +-1.95833 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64564 +20 +-1.95833 +11 +6.65359 +21 +-1.96739 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65359 +20 +-1.96739 +11 +6.66029 +21 +-1.97742 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66029 +20 +-1.97742 +11 +6.66562 +21 +-1.98823 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66562 +20 +-1.98823 +11 +6.66949 +21 +-1.99965 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66949 +20 +-1.99965 +11 +6.67185 +21 +-2.01147 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67185 +20 +-2.01147 +11 +6.67264 +21 +-2.0235 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67264 +20 +-2.0235 +11 +6.67185 +21 +-2.03553 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67185 +20 +-2.03553 +11 +6.66949 +21 +-2.04735 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66949 +20 +-2.04735 +11 +6.66562 +21 +-2.05877 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66562 +20 +-2.05877 +11 +6.66029 +21 +-2.06958 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66029 +20 +-2.06958 +11 +6.65359 +21 +-2.0796 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65359 +20 +-2.0796 +11 +6.64564 +21 +-2.08867 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64564 +20 +-2.08867 +11 +6.63658 +21 +-2.09662 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63658 +20 +-2.09662 +11 +6.62655 +21 +-2.10331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62655 +20 +-2.10331 +11 +6.61574 +21 +-2.10865 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61574 +20 +-2.10865 +11 +6.60433 +21 +-2.11252 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60433 +20 +-2.11252 +11 +6.5925 +21 +-2.11487 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5925 +20 +-2.11487 +11 +6.58047 +21 +-2.11566 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58047 +20 +-2.11566 +11 +6.56844 +21 +-2.11487 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56844 +20 +-2.11487 +11 +6.55662 +21 +-2.11252 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55662 +20 +-2.11252 +11 +6.5452 +21 +-2.10865 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5452 +20 +-2.10865 +11 +6.53439 +21 +-2.10331 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53439 +20 +-2.10331 +11 +6.52437 +21 +-2.09662 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52437 +20 +-2.09662 +11 +6.5153 +21 +-2.08867 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5153 +20 +-2.08867 +11 +6.50735 +21 +-2.0796 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50735 +20 +-2.0796 +11 +6.50066 +21 +-2.06958 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50066 +20 +-2.06958 +11 +6.49533 +21 +-2.05877 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49533 +20 +-2.05877 +11 +6.49145 +21 +-2.04735 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49145 +20 +-2.04735 +11 +6.4891 +21 +-2.03553 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.4891 +20 +-2.03553 +11 +6.48831 +21 +-2.0235 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49401 +20 +-2.0235 +11 +6.49482 +21 +-2.03527 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49482 +20 +-2.03527 +11 +6.49722 +21 +-2.04683 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49722 +20 +-2.04683 +11 +6.50117 +21 +-2.05794 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50117 +20 +-2.05794 +11 +6.5066 +21 +-2.06842 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5066 +20 +-2.06842 +11 +6.51341 +21 +-2.07806 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51341 +20 +-2.07806 +11 +6.52146 +21 +-2.08669 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52146 +20 +-2.08669 +11 +6.53061 +21 +-2.09413 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53061 +20 +-2.09413 +11 +6.5407 +21 +-2.10026 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5407 +20 +-2.10026 +11 +6.55152 +21 +-2.10497 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55152 +20 +-2.10497 +11 +6.56288 +21 +-2.10815 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56288 +20 +-2.10815 +11 +6.57457 +21 +-2.10976 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57457 +20 +-2.10976 +11 +6.58637 +21 +-2.10976 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58637 +20 +-2.10976 +11 +6.59806 +21 +-2.10815 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59806 +20 +-2.10815 +11 +6.60943 +21 +-2.10497 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60943 +20 +-2.10497 +11 +6.62025 +21 +-2.10026 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62025 +20 +-2.10026 +11 +6.63033 +21 +-2.09413 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63033 +20 +-2.09413 +11 +6.63949 +21 +-2.08669 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63949 +20 +-2.08669 +11 +6.64754 +21 +-2.07806 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64754 +20 +-2.07806 +11 +6.65434 +21 +-2.06842 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65434 +20 +-2.06842 +11 +6.65977 +21 +-2.05794 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65977 +20 +-2.05794 +11 +6.66373 +21 +-2.04683 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66373 +20 +-2.04683 +11 +6.66613 +21 +-2.03527 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66613 +20 +-2.03527 +11 +6.66693 +21 +-2.0235 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66693 +20 +-2.0235 +11 +6.66613 +21 +-2.01173 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66613 +20 +-2.01173 +11 +6.66373 +21 +-2.00017 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66373 +20 +-2.00017 +11 +6.65977 +21 +-1.98905 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65977 +20 +-1.98905 +11 +6.65434 +21 +-1.97858 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65434 +20 +-1.97858 +11 +6.64754 +21 +-1.96894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64754 +20 +-1.96894 +11 +6.63949 +21 +-1.96031 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63949 +20 +-1.96031 +11 +6.63033 +21 +-1.95287 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63033 +20 +-1.95287 +11 +6.62025 +21 +-1.94673 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62025 +20 +-1.94673 +11 +6.60943 +21 +-1.94203 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60943 +20 +-1.94203 +11 +6.59806 +21 +-1.93885 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59806 +20 +-1.93885 +11 +6.58637 +21 +-1.93724 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58637 +20 +-1.93724 +11 +6.57457 +21 +-1.93724 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57457 +20 +-1.93724 +11 +6.56288 +21 +-1.93885 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56288 +20 +-1.93885 +11 +6.55152 +21 +-1.94203 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.55152 +20 +-1.94203 +11 +6.5407 +21 +-1.94673 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5407 +20 +-1.94673 +11 +6.53061 +21 +-1.95287 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.53061 +20 +-1.95287 +11 +6.52146 +21 +-1.96031 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.52146 +20 +-1.96031 +11 +6.51341 +21 +-1.96894 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.51341 +20 +-1.96894 +11 +6.5066 +21 +-1.97858 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5066 +20 +-1.97858 +11 +6.50117 +21 +-1.98905 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.50117 +20 +-1.98905 +11 +6.49722 +21 +-2.00017 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49722 +20 +-2.00017 +11 +6.49482 +21 +-2.01173 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.49482 +20 +-2.01173 +11 +6.49401 +21 +-2.0235 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34703 +20 +-2.0235 +11 +5.34782 +21 +-2.01153 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34782 +20 +-2.01153 +11 +5.35016 +21 +-1.99977 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.35016 +20 +-1.99977 +11 +5.35401 +21 +-1.98841 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.35401 +20 +-1.98841 +11 +5.35932 +21 +-1.97765 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.35932 +20 +-1.97765 +11 +5.36598 +21 +-1.96768 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36598 +20 +-1.96768 +11 +5.37389 +21 +-1.95866 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37389 +20 +-1.95866 +11 +5.38291 +21 +-1.95076 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38291 +20 +-1.95076 +11 +5.39288 +21 +-1.94409 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39288 +20 +-1.94409 +11 +5.40364 +21 +-1.93879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40364 +20 +-1.93879 +11 +5.41499 +21 +-1.93493 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41499 +20 +-1.93493 +11 +5.42676 +21 +-1.93259 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42676 +20 +-1.93259 +11 +5.43872 +21 +-1.93181 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43872 +20 +-1.93181 +11 +5.45069 +21 +-1.93259 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45069 +20 +-1.93259 +11 +5.46246 +21 +-1.93493 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.46246 +20 +-1.93493 +11 +5.47381 +21 +-1.93879 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47381 +20 +-1.93879 +11 +5.48457 +21 +-1.94409 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.48457 +20 +-1.94409 +11 +5.49454 +21 +-1.95076 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49454 +20 +-1.95076 +11 +5.50356 +21 +-1.95866 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50356 +20 +-1.95866 +11 +5.51147 +21 +-1.96768 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51147 +20 +-1.96768 +11 +5.51813 +21 +-1.97765 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51813 +20 +-1.97765 +11 +5.52344 +21 +-1.98841 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52344 +20 +-1.98841 +11 +5.52729 +21 +-1.99977 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52729 +20 +-1.99977 +11 +5.52963 +21 +-2.01153 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52963 +20 +-2.01153 +11 +5.53042 +21 +-2.0235 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.53042 +20 +-2.0235 +11 +5.52963 +21 +-2.03547 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52963 +20 +-2.03547 +11 +5.52729 +21 +-2.04723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52729 +20 +-2.04723 +11 +5.52344 +21 +-2.05859 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52344 +20 +-2.05859 +11 +5.51813 +21 +-2.06934 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51813 +20 +-2.06934 +11 +5.51147 +21 +-2.07932 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51147 +20 +-2.07932 +11 +5.50356 +21 +-2.08833 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50356 +20 +-2.08833 +11 +5.49454 +21 +-2.09624 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49454 +20 +-2.09624 +11 +5.48457 +21 +-2.10291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.48457 +20 +-2.10291 +11 +5.47381 +21 +-2.10821 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47381 +20 +-2.10821 +11 +5.46246 +21 +-2.11207 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.46246 +20 +-2.11207 +11 +5.45069 +21 +-2.11441 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45069 +20 +-2.11441 +11 +5.43872 +21 +-2.11519 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43872 +20 +-2.11519 +11 +5.42676 +21 +-2.11441 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42676 +20 +-2.11441 +11 +5.41499 +21 +-2.11207 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41499 +20 +-2.11207 +11 +5.40364 +21 +-2.10821 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40364 +20 +-2.10821 +11 +5.39288 +21 +-2.10291 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39288 +20 +-2.10291 +11 +5.38291 +21 +-2.09624 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38291 +20 +-2.09624 +11 +5.37389 +21 +-2.08833 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37389 +20 +-2.08833 +11 +5.36598 +21 +-2.07932 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36598 +20 +-2.07932 +11 +5.35932 +21 +-2.06934 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.35932 +20 +-2.06934 +11 +5.35401 +21 +-2.05859 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.35401 +20 +-2.05859 +11 +5.35016 +21 +-2.04723 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.35016 +20 +-2.04723 +11 +5.34782 +21 +-2.03547 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34782 +20 +-2.03547 +11 +5.34703 +21 +-2.0235 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.35274 +20 +-2.0235 +11 +5.35354 +21 +-2.03521 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.35354 +20 +-2.03521 +11 +5.35593 +21 +-2.0467 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.35593 +20 +-2.0467 +11 +5.35986 +21 +-2.05776 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.35986 +20 +-2.05776 +11 +5.36526 +21 +-2.06818 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36526 +20 +-2.06818 +11 +5.37203 +21 +-2.07776 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37203 +20 +-2.07776 +11 +5.38004 +21 +-2.08634 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38004 +20 +-2.08634 +11 +5.38914 +21 +-2.09375 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38914 +20 +-2.09375 +11 +5.39917 +21 +-2.09984 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39917 +20 +-2.09984 +11 +5.40993 +21 +-2.10452 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40993 +20 +-2.10452 +11 +5.42123 +21 +-2.10769 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42123 +20 +-2.10769 +11 +5.43286 +21 +-2.10928 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43286 +20 +-2.10928 +11 +5.44459 +21 +-2.10928 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44459 +20 +-2.10928 +11 +5.45622 +21 +-2.10769 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45622 +20 +-2.10769 +11 +5.46752 +21 +-2.10452 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.46752 +20 +-2.10452 +11 +5.47828 +21 +-2.09984 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47828 +20 +-2.09984 +11 +5.48831 +21 +-2.09375 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.48831 +20 +-2.09375 +11 +5.49741 +21 +-2.08634 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49741 +20 +-2.08634 +11 +5.50542 +21 +-2.07776 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50542 +20 +-2.07776 +11 +5.51219 +21 +-2.06818 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51219 +20 +-2.06818 +11 +5.51759 +21 +-2.05776 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51759 +20 +-2.05776 +11 +5.52152 +21 +-2.0467 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52152 +20 +-2.0467 +11 +5.52391 +21 +-2.03521 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52391 +20 +-2.03521 +11 +5.52471 +21 +-2.0235 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52471 +20 +-2.0235 +11 +5.52391 +21 +-2.01179 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52391 +20 +-2.01179 +11 +5.52152 +21 +-2.0003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.52152 +20 +-2.0003 +11 +5.51759 +21 +-1.98924 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51759 +20 +-1.98924 +11 +5.51219 +21 +-1.97882 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.51219 +20 +-1.97882 +11 +5.50542 +21 +-1.96924 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.50542 +20 +-1.96924 +11 +5.49741 +21 +-1.96066 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.49741 +20 +-1.96066 +11 +5.48831 +21 +-1.95325 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.48831 +20 +-1.95325 +11 +5.47828 +21 +-1.94715 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.47828 +20 +-1.94715 +11 +5.46752 +21 +-1.94248 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.46752 +20 +-1.94248 +11 +5.45622 +21 +-1.93931 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45622 +20 +-1.93931 +11 +5.44459 +21 +-1.93771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44459 +20 +-1.93771 +11 +5.43286 +21 +-1.93771 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43286 +20 +-1.93771 +11 +5.42123 +21 +-1.93931 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42123 +20 +-1.93931 +11 +5.40993 +21 +-1.94248 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40993 +20 +-1.94248 +11 +5.39917 +21 +-1.94715 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39917 +20 +-1.94715 +11 +5.38914 +21 +-1.95325 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38914 +20 +-1.95325 +11 +5.38004 +21 +-1.96066 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38004 +20 +-1.96066 +11 +5.37203 +21 +-1.96924 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37203 +20 +-1.96924 +11 +5.36526 +21 +-1.97882 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36526 +20 +-1.97882 +11 +5.35986 +21 +-1.98924 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.35986 +20 +-1.98924 +11 +5.35593 +21 +-2.0003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.35593 +20 +-2.0003 +11 +5.35354 +21 +-2.01179 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.35354 +20 +-2.01179 +11 +5.35274 +21 +-2.0235 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.76443 +20 +-1.89161 +11 +6.7726 +21 +-1.89225 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.7726 +20 +-1.89225 +11 +6.78057 +21 +-1.89417 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.78057 +20 +-1.89417 +11 +6.78814 +21 +-1.8973 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.78814 +20 +-1.8973 +11 +6.79512 +21 +-1.90158 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.79512 +20 +-1.90158 +11 +6.80135 +21 +-1.9069 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.80135 +20 +-1.9069 +11 +6.80667 +21 +-1.91313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.80667 +20 +-1.91313 +11 +6.81096 +21 +-1.92012 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81096 +20 +-1.92012 +11 +6.81409 +21 +-1.92769 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81409 +20 +-1.92769 +11 +6.816 +21 +-1.93566 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.816 +20 +-1.93566 +11 +6.81665 +21 +-1.94383 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81665 +20 +-1.94383 +11 +6.81665 +21 +-1.94383 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81665 +20 +-1.94383 +11 +6.81663 +21 +-1.94387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81663 +20 +-1.94387 +11 +6.81665 +21 +-1.94391 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81665 +20 +-1.94391 +11 +6.68447 +21 +-5.12373 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68447 +20 +-5.12373 +11 +6.68417 +21 +-5.12438 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68417 +20 +-5.12438 +11 +6.6839 +21 +-5.12504 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6839 +20 +-5.12504 +11 +6.68386 +21 +-5.12506 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68386 +20 +-5.12506 +11 +6.68384 +21 +-5.1251 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68384 +20 +-5.1251 +11 +6.68317 +21 +-5.12534 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68317 +20 +-5.12534 +11 +6.6825 +21 +-5.12562 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6825 +20 +-5.12562 +11 +6.67888 +21 +-5.12562 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67888 +20 +-5.12562 +11 +6.67888 +21 +-5.12562 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67888 +20 +-5.12562 +11 +6.67246 +21 +-5.12562 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67246 +20 +-5.12562 +11 +6.65969 +21 +-5.12706 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65969 +20 +-5.12706 +11 +6.64716 +21 +-5.12992 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64716 +20 +-5.12992 +11 +6.63503 +21 +-5.13416 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63503 +20 +-5.13416 +11 +6.62345 +21 +-5.13974 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.62345 +20 +-5.13974 +11 +6.61257 +21 +-5.14657 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.61257 +20 +-5.14657 +11 +6.60252 +21 +-5.15459 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60252 +20 +-5.15459 +11 +6.59343 +21 +-5.16367 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59343 +20 +-5.16367 +11 +6.58542 +21 +-5.17372 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58542 +20 +-5.17372 +11 +6.57858 +21 +-5.1846 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57858 +20 +-5.1846 +11 +6.57301 +21 +-5.19618 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57301 +20 +-5.19618 +11 +6.56876 +21 +-5.20831 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56876 +20 +-5.20831 +11 +6.5659 +21 +-5.22084 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5659 +20 +-5.22084 +11 +6.56446 +21 +-5.23361 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56446 +20 +-5.23361 +11 +6.56446 +21 +-5.24003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56446 +20 +-5.24003 +11 +6.56446 +21 +-5.24003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56446 +20 +-5.24003 +11 +6.56446 +21 +-5.24003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56446 +20 +-5.24003 +11 +6.56446 +21 +-5.24004 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56446 +20 +-5.24004 +11 +6.56409 +21 +-5.24119 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56409 +20 +-5.24119 +11 +6.56394 +21 +-5.2413 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56394 +20 +-5.2413 +11 +6.56389 +21 +-5.24143 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56389 +20 +-5.24143 +11 +6.5636 +21 +-5.24154 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5636 +20 +-5.24154 +11 +6.5631 +21 +-5.24191 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5631 +20 +-5.24191 +11 +6.56273 +21 +-5.24191 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56273 +20 +-5.24191 +11 +6.5625 +21 +-5.242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.5625 +20 +-5.242 +11 +5.4575 +21 +-5.24193 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4575 +20 +-5.24193 +11 +5.45727 +21 +-5.24184 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45727 +20 +-5.24184 +11 +5.4569 +21 +-5.24184 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4569 +20 +-5.24184 +11 +5.4564 +21 +-5.24148 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4564 +20 +-5.24148 +11 +5.45611 +21 +-5.24136 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45611 +20 +-5.24136 +11 +5.45606 +21 +-5.24123 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45606 +20 +-5.24123 +11 +5.45591 +21 +-5.24112 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45591 +20 +-5.24112 +11 +5.45554 +21 +-5.23997 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45554 +20 +-5.23997 +11 +5.45554 +21 +-5.23997 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45554 +20 +-5.23997 +11 +5.45554 +21 +-5.23997 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45554 +20 +-5.23997 +11 +5.45554 +21 +-5.23996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45554 +20 +-5.23996 +11 +5.45554 +21 +-5.23354 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45554 +20 +-5.23354 +11 +5.4541 +21 +-5.22077 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4541 +20 +-5.22077 +11 +5.45124 +21 +-5.20824 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45124 +20 +-5.20824 +11 +5.44699 +21 +-5.19611 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44699 +20 +-5.19611 +11 +5.44142 +21 +-5.18453 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44142 +20 +-5.18453 +11 +5.43458 +21 +-5.17365 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43458 +20 +-5.17365 +11 +5.42657 +21 +-5.1636 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42657 +20 +-5.1636 +11 +5.41748 +21 +-5.15452 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41748 +20 +-5.15452 +11 +5.40743 +21 +-5.1465 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.40743 +20 +-5.1465 +11 +5.39655 +21 +-5.13967 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.39655 +20 +-5.13967 +11 +5.38497 +21 +-5.13409 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38497 +20 +-5.13409 +11 +5.37284 +21 +-5.12985 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37284 +20 +-5.12985 +11 +5.36031 +21 +-5.12699 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36031 +20 +-5.12699 +11 +5.34754 +21 +-5.12555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34754 +20 +-5.12555 +11 +5.34112 +21 +-5.12555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34112 +20 +-5.12555 +11 +5.3375 +21 +-5.12555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3375 +20 +-5.12555 +11 +5.33683 +21 +-5.12527 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33683 +20 +-5.12527 +11 +5.33616 +21 +-5.12503 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33616 +20 +-5.12503 +11 +5.33614 +21 +-5.12499 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33614 +20 +-5.12499 +11 +5.3361 +21 +-5.12497 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.3361 +20 +-5.12497 +11 +5.33583 +21 +-5.12431 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33583 +20 +-5.12431 +11 +5.33553 +21 +-5.12366 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33553 +20 +-5.12366 +11 +5.20252 +21 +-1.94391 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20252 +20 +-1.94391 +11 +5.20253 +21 +-1.94387 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20253 +20 +-1.94387 +11 +5.20252 +21 +-1.94383 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20252 +20 +-1.94383 +11 +5.20316 +21 +-1.93566 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20316 +20 +-1.93566 +11 +5.20507 +21 +-1.92769 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20507 +20 +-1.92769 +11 +5.20821 +21 +-1.92012 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20821 +20 +-1.92012 +11 +5.21249 +21 +-1.91313 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.21249 +20 +-1.91313 +11 +5.21781 +21 +-1.9069 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.21781 +20 +-1.9069 +11 +5.22404 +21 +-1.90158 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.22404 +20 +-1.90158 +11 +5.23103 +21 +-1.8973 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.23103 +20 +-1.8973 +11 +5.2386 +21 +-1.89417 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.2386 +20 +-1.89417 +11 +5.24656 +21 +-1.89225 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.24656 +20 +-1.89225 +11 +5.25473 +21 +-1.89161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25473 +20 +-1.89161 +11 +5.25473 +21 +-1.89161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25473 +20 +-1.89161 +11 +6.76443 +21 +-1.89161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25473 +20 +-1.89555 +11 +5.25473 +21 +-1.89555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25473 +20 +-1.89555 +11 +5.25093 +21 +-1.89555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25093 +20 +-1.89555 +11 +5.24343 +21 +-1.89674 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.24343 +20 +-1.89674 +11 +5.2362 +21 +-1.89908 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.2362 +20 +-1.89908 +11 +5.22943 +21 +-1.90253 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.22943 +20 +-1.90253 +11 +5.22328 +21 +-1.907 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.22328 +20 +-1.907 +11 +5.21791 +21 +-1.91237 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.21791 +20 +-1.91237 +11 +5.21344 +21 +-1.91852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.21344 +20 +-1.91852 +11 +5.20999 +21 +-1.92529 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20999 +20 +-1.92529 +11 +5.20764 +21 +-1.93252 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20764 +20 +-1.93252 +11 +5.20645 +21 +-1.94003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20645 +20 +-1.94003 +11 +5.20645 +21 +-1.94379 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.20645 +20 +-1.94379 +11 +5.33938 +21 +-5.12161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.33938 +20 +-5.12161 +11 +5.34112 +21 +-5.12161 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.34112 +20 +-5.12161 +11 +5.35349 +21 +-5.12226 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.35349 +20 +-5.12226 +11 +5.36573 +21 +-5.1242 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.36573 +20 +-5.1242 +11 +5.37769 +21 +-5.1274 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.37769 +20 +-5.1274 +11 +5.38926 +21 +-5.13184 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.38926 +20 +-5.13184 +11 +5.4003 +21 +-5.13747 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.4003 +20 +-5.13747 +11 +5.41069 +21 +-5.14421 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.41069 +20 +-5.14421 +11 +5.42031 +21 +-5.15201 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42031 +20 +-5.15201 +11 +5.42907 +21 +-5.16077 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.42907 +20 +-5.16077 +11 +5.43687 +21 +-5.1704 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.43687 +20 +-5.1704 +11 +5.44362 +21 +-5.18079 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44362 +20 +-5.18079 +11 +5.44924 +21 +-5.19183 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.44924 +20 +-5.19183 +11 +5.45368 +21 +-5.20339 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45368 +20 +-5.20339 +11 +5.45689 +21 +-5.21536 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45689 +20 +-5.21536 +11 +5.45882 +21 +-5.22759 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45882 +20 +-5.22759 +11 +5.45937 +21 +-5.238 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.45937 +20 +-5.238 +11 +6.56063 +21 +-5.23807 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56063 +20 +-5.23807 +11 +6.56118 +21 +-5.22766 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56118 +20 +-5.22766 +11 +6.56311 +21 +-5.21543 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56311 +20 +-5.21543 +11 +6.56632 +21 +-5.20346 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.56632 +20 +-5.20346 +11 +6.57076 +21 +-5.1919 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57076 +20 +-5.1919 +11 +6.57638 +21 +-5.18086 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.57638 +20 +-5.18086 +11 +6.58313 +21 +-5.17047 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.58313 +20 +-5.17047 +11 +6.59093 +21 +-5.16084 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59093 +20 +-5.16084 +11 +6.59969 +21 +-5.15208 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.59969 +20 +-5.15208 +11 +6.60932 +21 +-5.14428 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.60932 +20 +-5.14428 +11 +6.6197 +21 +-5.13754 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.6197 +20 +-5.13754 +11 +6.63074 +21 +-5.13191 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.63074 +20 +-5.13191 +11 +6.64231 +21 +-5.12747 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.64231 +20 +-5.12747 +11 +6.65428 +21 +-5.12427 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.65428 +20 +-5.12427 +11 +6.66651 +21 +-5.12233 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.66651 +20 +-5.12233 +11 +6.67888 +21 +-5.12168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67888 +20 +-5.12168 +11 +6.67888 +21 +-5.12168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.67888 +20 +-5.12168 +11 +6.68062 +21 +-5.12168 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.68062 +20 +-5.12168 +11 +6.81271 +21 +-1.9438 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81271 +20 +-1.9438 +11 +6.81271 +21 +-1.94003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81271 +20 +-1.94003 +11 +6.81152 +21 +-1.93252 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.81152 +20 +-1.93252 +11 +6.80917 +21 +-1.92529 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.80917 +20 +-1.92529 +11 +6.80572 +21 +-1.91852 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.80572 +20 +-1.91852 +11 +6.80126 +21 +-1.91237 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.80126 +20 +-1.91237 +11 +6.79588 +21 +-1.907 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.79588 +20 +-1.907 +11 +6.78973 +21 +-1.90253 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.78973 +20 +-1.90253 +11 +6.78296 +21 +-1.89908 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.78296 +20 +-1.89908 +11 +6.77573 +21 +-1.89674 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.77573 +20 +-1.89674 +11 +6.76823 +21 +-1.89555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.76823 +20 +-1.89555 +11 +6.76443 +21 +-1.89555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +6.76443 +20 +-1.89555 +11 +5.25473 +21 +-1.89555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25473 +20 +-1.89555 +11 +5.25473 +21 +-1.89555 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +5.25473 +20 +-1.89555 +11 +5.25473 +21 +-1.89555 + 0 +ENDSEC + 0 +EOF diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/DXF/StudioMic-NPTH-drl_map.dxf b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/DXF/StudioMic-NPTH-drl_map.dxf new file mode 100755 index 0000000..26dacd8 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/DXF/StudioMic-NPTH-drl_map.dxf @@ -0,0 +1,7666 @@ + 0 +SECTION + 2 +HEADER + 9 +$ANGBASE + 50 +0.0 + 9 +$ANGDIR + 70 +1 + 9 +$MEASUREMENT + 70 +1 + 0 +ENDSEC + 0 +SECTION + 2 +TABLES + 0 +TABLE + 2 +LTYPE + 70 +4 + 0 +LTYPE + 5 +40F + 2 +CONTINUOUS + 70 +0 + 3 +Solid line + 72 +65 + 73 +0 + 40 +0.0 + 0 +LTYPE + 5 +410 + 2 +DASHDOT + 70 +0 + 3 +Dash Dot ____ _ ____ _ + 72 +65 + 73 +4 + 40 +2.0 + 49 +1.25 + 49 +-0.25 + 49 +0.25 + 49 +-0.25 + 0 +LTYPE + 5 +411 + 2 +DASHED + 70 +0 + 3 +Dashed __ __ __ __ __ + 72 +65 + 73 +2 + 40 +0.75 + 49 +0.5 + 49 +-0.25 + 0 +LTYPE + 5 +43B + 2 +DOTTED + 70 +0 + 3 +Dotted . . . . + 72 +65 + 73 +2 + 40 +0.2 + 49 +0.0 + 49 +-0.2 + 0 +ENDTAB + 0 +TABLE + 2 +STYLE + 70 +4 + 0 +STYLE + 2 +KICAD + 70 +0 + 40 +0 + 41 +1 + 42 +1 + 50 +0 + 71 +0 + 3 +isocp.shx + 0 +STYLE + 2 +KICADB + 70 +0 + 40 +0 + 41 +1 + 42 +1 + 50 +0 + 71 +0 + 3 +isocp.shx + 0 +STYLE + 2 +KICADI + 70 +0 + 40 +0 + 41 +1 + 42 +1 + 50 +15 + 71 +0 + 3 +isocp.shx + 0 +STYLE + 2 +KICADBI + 70 +0 + 40 +0 + 41 +1 + 42 +1 + 50 +15 + 71 +0 + 3 +isocp.shx + 0 +ENDTAB + 0 +TABLE + 2 +LAYER + 70 +1 + 0 +LAYER + 2 +BLACK + 70 +0 + 62 +7 + 6 +CONTINUOUS + 0 +ENDTAB + 0 +ENDSEC + 0 +SECTION + 2 +ENTITIES +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +169.644 +20 +-130.141 +11 +169.736 +21 +-130.141 +0 +ARC +8 +BLACK +10 +135.664 +20 +-133.095 +40 +2.95622 +50 +-0.000290722 +51 +90.0003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +135.664 +20 +-130.139 +11 +135.572 +21 +-130.139 +0 +ARC +8 +BLACK +10 +171.817 +20 +-49.3732 +40 +1.27633 +50 +-0 +51 +90 +0 +ARC +8 +BLACK +10 +133.47 +20 +-49.3732 +40 +1.27633 +50 +90 +51 +180 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +132.194 +20 +-49.3732 +11 +135.572 +21 +-130.139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +133.47 +20 +-48.0969 +11 +171.817 +21 +-48.0969 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +173.093 +20 +-49.3732 +11 +169.736 +21 +-130.141 +0 +ARC +8 +BLACK +10 +169.644 +20 +-133.097 +40 +2.95622 +50 +89.9997 +51 +180 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +138.621 +20 +-133.095 +11 +166.687 +21 +-133.097 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +136.794 +20 +-50.0469 +11 +139.494 +21 +-52.7469 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +139.494 +20 +-50.0469 +11 +136.794 +21 +-52.7469 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +137.744 +20 +-52.7469 +11 +138.544 +21 +-52.7469 +0 +ARC +8 +BLACK +10 +138.544 +20 +-51.3969 +40 +1.35 +50 +270 +51 +450 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +138.544 +20 +-50.0469 +11 +137.744 +21 +-50.0469 +0 +ARC +8 +BLACK +10 +137.744 +20 +-51.3969 +40 +1.35 +50 +90 +51 +270 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +165.794 +20 +-50.0469 +11 +168.494 +21 +-52.7469 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +168.494 +20 +-50.0469 +11 +165.794 +21 +-52.7469 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +166.744 +20 +-52.7469 +11 +167.544 +21 +-52.7469 +0 +ARC +8 +BLACK +10 +167.544 +20 +-51.3969 +40 +1.35 +50 +270 +51 +450 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +167.544 +20 +-50.0469 +11 +166.744 +21 +-50.0469 +0 +ARC +8 +BLACK +10 +166.744 +20 +-51.3969 +40 +1.35 +50 +90 +51 +270 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +134.62 +20 +-136.082 +11 +134.62 +21 +-134.082 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +134.62 +20 +-134.082 +11 +135.096 +21 +-134.082 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +135.096 +20 +-134.082 +11 +135.382 +21 +-134.177 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +135.382 +20 +-134.177 +11 +135.572 +21 +-134.367 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +135.572 +20 +-134.367 +11 +135.668 +21 +-134.558 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +135.668 +20 +-134.558 +11 +135.763 +21 +-134.939 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +135.763 +20 +-134.939 +11 +135.763 +21 +-135.225 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +135.763 +20 +-135.225 +11 +135.668 +21 +-135.605 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +135.668 +20 +-135.605 +11 +135.572 +21 +-135.796 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +135.572 +20 +-135.796 +11 +135.382 +21 +-135.986 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +135.382 +20 +-135.986 +11 +135.096 +21 +-136.082 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +135.096 +20 +-136.082 +11 +134.62 +21 +-136.082 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +136.62 +20 +-136.082 +11 +136.62 +21 +-134.748 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +136.62 +20 +-135.129 +11 +136.715 +21 +-134.939 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +136.715 +20 +-134.939 +11 +136.811 +21 +-134.844 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +136.811 +20 +-134.844 +11 +137.001 +21 +-134.748 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +137.001 +20 +-134.748 +11 +137.192 +21 +-134.748 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +137.858 +20 +-136.082 +11 +137.858 +21 +-134.748 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +137.858 +20 +-134.082 +11 +137.763 +21 +-134.177 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +137.763 +20 +-134.177 +11 +137.858 +21 +-134.272 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +137.858 +20 +-134.272 +11 +137.953 +21 +-134.177 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +137.953 +20 +-134.177 +11 +137.858 +21 +-134.082 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +137.858 +20 +-134.082 +11 +137.858 +21 +-134.272 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +139.096 +20 +-136.082 +11 +138.906 +21 +-135.986 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +138.906 +20 +-135.986 +11 +138.811 +21 +-135.796 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +138.811 +20 +-135.796 +11 +138.811 +21 +-134.082 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +140.144 +20 +-136.082 +11 +139.953 +21 +-135.986 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +139.953 +20 +-135.986 +11 +139.858 +21 +-135.796 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +139.858 +20 +-135.796 +11 +139.858 +21 +-134.082 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +142.106 +20 +-136.082 +11 +142.106 +21 +-134.082 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +142.106 +20 +-134.082 +11 +142.772 +21 +-135.51 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +142.772 +20 +-135.51 +11 +143.439 +21 +-134.082 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +143.439 +20 +-134.082 +11 +143.439 +21 +-136.082 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +145.249 +20 +-136.082 +11 +145.249 +21 +-135.034 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +145.249 +20 +-135.034 +11 +145.153 +21 +-134.844 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +145.153 +20 +-134.844 +11 +144.963 +21 +-134.748 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +144.963 +20 +-134.748 +11 +144.582 +21 +-134.748 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +144.582 +20 +-134.748 +11 +144.392 +21 +-134.844 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +145.249 +20 +-135.986 +11 +145.058 +21 +-136.082 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +145.058 +20 +-136.082 +11 +144.582 +21 +-136.082 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +144.582 +20 +-136.082 +11 +144.392 +21 +-135.986 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +144.392 +20 +-135.986 +11 +144.296 +21 +-135.796 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +144.296 +20 +-135.796 +11 +144.296 +21 +-135.605 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +144.296 +20 +-135.605 +11 +144.392 +21 +-135.415 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +144.392 +20 +-135.415 +11 +144.582 +21 +-135.32 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +144.582 +20 +-135.32 +11 +145.058 +21 +-135.32 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +145.058 +20 +-135.32 +11 +145.249 +21 +-135.225 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +146.201 +20 +-134.748 +11 +146.201 +21 +-136.748 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +146.201 +20 +-134.844 +11 +146.392 +21 +-134.748 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +146.392 +20 +-134.748 +11 +146.772 +21 +-134.748 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +146.772 +20 +-134.748 +11 +146.963 +21 +-134.844 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +146.963 +20 +-134.844 +11 +147.058 +21 +-134.939 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +147.058 +20 +-134.939 +11 +147.153 +21 +-135.129 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +147.153 +20 +-135.129 +11 +147.153 +21 +-135.701 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +147.153 +20 +-135.701 +11 +147.058 +21 +-135.891 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +147.058 +20 +-135.891 +11 +146.963 +21 +-135.986 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +146.963 +20 +-135.986 +11 +146.772 +21 +-136.082 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +146.772 +20 +-136.082 +11 +146.392 +21 +-136.082 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +146.392 +20 +-136.082 +11 +146.201 +21 +-135.986 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +148.011 +20 +-135.891 +11 +148.106 +21 +-135.986 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +148.106 +20 +-135.986 +11 +148.011 +21 +-136.082 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +148.011 +20 +-136.082 +11 +147.915 +21 +-135.986 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +147.915 +20 +-135.986 +11 +148.011 +21 +-135.891 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +148.011 +20 +-135.891 +11 +148.011 +21 +-136.082 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +148.011 +20 +-134.844 +11 +148.106 +21 +-134.939 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +148.106 +20 +-134.939 +11 +148.011 +21 +-135.034 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +148.011 +20 +-135.034 +11 +147.915 +21 +-134.939 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +147.915 +20 +-134.939 +11 +148.011 +21 +-134.844 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +148.011 +20 +-134.844 +11 +148.011 +21 +-135.034 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +130.144 +20 +-138.547 +11 +132.144 +21 +-140.547 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +132.144 +20 +-138.547 +11 +130.144 +21 +-140.547 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +134.525 +20 +-138.472 +11 +134.62 +21 +-138.377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +134.62 +20 +-138.377 +11 +134.811 +21 +-138.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +134.811 +20 +-138.282 +11 +135.287 +21 +-138.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +135.287 +20 +-138.282 +11 +135.477 +21 +-138.377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +135.477 +20 +-138.377 +11 +135.572 +21 +-138.472 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +135.572 +20 +-138.472 +11 +135.668 +21 +-138.663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +135.668 +20 +-138.663 +11 +135.668 +21 +-138.853 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +135.668 +20 +-138.853 +11 +135.572 +21 +-139.139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +135.572 +20 +-139.139 +11 +134.43 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +134.43 +20 +-140.282 +11 +135.668 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +136.525 +20 +-140.091 +11 +136.62 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +136.62 +20 +-140.186 +11 +136.525 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +136.525 +20 +-140.282 +11 +136.43 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +136.43 +20 +-140.186 +11 +136.525 +21 +-140.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +136.525 +20 +-140.091 +11 +136.525 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +137.287 +20 +-138.282 +11 +138.62 +21 +-138.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +138.62 +20 +-138.282 +11 +137.763 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +139.763 +20 +-138.282 +11 +139.953 +21 +-138.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +139.953 +20 +-138.282 +11 +140.144 +21 +-138.377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +140.144 +20 +-138.377 +11 +140.239 +21 +-138.472 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +140.239 +20 +-138.472 +11 +140.334 +21 +-138.663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +140.334 +20 +-138.663 +11 +140.43 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +140.43 +20 +-139.044 +11 +140.43 +21 +-139.52 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +140.43 +20 +-139.52 +11 +140.334 +21 +-139.901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +140.334 +20 +-139.901 +11 +140.239 +21 +-140.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +140.239 +20 +-140.091 +11 +140.144 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +140.144 +20 +-140.186 +11 +139.953 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +139.953 +20 +-140.282 +11 +139.763 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +139.763 +20 +-140.282 +11 +139.572 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +139.572 +20 +-140.186 +11 +139.477 +21 +-140.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +139.477 +20 +-140.091 +11 +139.382 +21 +-139.901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +139.382 +20 +-139.901 +11 +139.287 +21 +-139.52 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +139.287 +20 +-139.52 +11 +139.287 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +139.287 +20 +-139.044 +11 +139.382 +21 +-138.663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +139.382 +20 +-138.663 +11 +139.477 +21 +-138.472 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +139.477 +20 +-138.472 +11 +139.572 +21 +-138.377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +139.572 +20 +-138.377 +11 +139.763 +21 +-138.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +141.668 +20 +-138.282 +11 +141.858 +21 +-138.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +141.858 +20 +-138.282 +11 +142.049 +21 +-138.377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +142.049 +20 +-138.377 +11 +142.144 +21 +-138.472 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +142.144 +20 +-138.472 +11 +142.239 +21 +-138.663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +142.239 +20 +-138.663 +11 +142.334 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +142.334 +20 +-139.044 +11 +142.334 +21 +-139.52 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +142.334 +20 +-139.52 +11 +142.239 +21 +-139.901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +142.239 +20 +-139.901 +11 +142.144 +21 +-140.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +142.144 +20 +-140.091 +11 +142.049 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +142.049 +20 +-140.186 +11 +141.858 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +141.858 +20 +-140.282 +11 +141.668 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +141.668 +20 +-140.282 +11 +141.477 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +141.477 +20 +-140.186 +11 +141.382 +21 +-140.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +141.382 +20 +-140.091 +11 +141.287 +21 +-139.901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +141.287 +20 +-139.901 +11 +141.192 +21 +-139.52 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +141.192 +20 +-139.52 +11 +141.192 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +141.192 +20 +-139.044 +11 +141.287 +21 +-138.663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +141.287 +20 +-138.663 +11 +141.382 +21 +-138.472 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +141.382 +20 +-138.472 +11 +141.477 +21 +-138.377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +141.477 +20 +-138.377 +11 +141.668 +21 +-138.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +143.192 +20 +-140.282 +11 +143.192 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +143.192 +20 +-139.139 +11 +143.287 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +143.287 +20 +-139.044 +11 +143.477 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +143.477 +20 +-138.948 +11 +143.763 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +143.763 +20 +-138.948 +11 +143.953 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +143.953 +20 +-139.044 +11 +144.049 +21 +-139.234 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +144.049 +20 +-139.234 +11 +144.049 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +144.049 +20 +-139.234 +11 +144.144 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +144.144 +20 +-139.044 +11 +144.334 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +144.334 +20 +-138.948 +11 +144.62 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +144.62 +20 +-138.948 +11 +144.811 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +144.811 +20 +-139.044 +11 +144.906 +21 +-139.234 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +144.906 +20 +-139.234 +11 +144.906 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +145.858 +20 +-140.282 +11 +145.858 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +145.858 +20 +-139.139 +11 +145.953 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +145.953 +20 +-139.044 +11 +146.144 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +146.144 +20 +-138.948 +11 +146.43 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +146.43 +20 +-138.948 +11 +146.62 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +146.62 +20 +-139.044 +11 +146.715 +21 +-139.234 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +146.715 +20 +-139.234 +11 +146.715 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +146.715 +20 +-139.234 +11 +146.811 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +146.811 +20 +-139.044 +11 +147.001 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +147.001 +20 +-138.948 +11 +147.287 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +147.287 +20 +-138.948 +11 +147.477 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +147.477 +20 +-139.044 +11 +147.572 +21 +-139.234 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +147.572 +20 +-139.234 +11 +147.572 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +151.153 +20 +-138.186 +11 +149.439 +21 +-140.758 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +153.401 +20 +-138.282 +11 +153.592 +21 +-138.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +153.592 +20 +-138.282 +11 +153.782 +21 +-138.377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +153.782 +20 +-138.377 +11 +153.877 +21 +-138.472 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +153.877 +20 +-138.472 +11 +153.972 +21 +-138.663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +153.972 +20 +-138.663 +11 +154.068 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +154.068 +20 +-139.044 +11 +154.068 +21 +-139.52 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +154.068 +20 +-139.52 +11 +153.972 +21 +-139.901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +153.972 +20 +-139.901 +11 +153.877 +21 +-140.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +153.877 +20 +-140.091 +11 +153.782 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +153.782 +20 +-140.186 +11 +153.592 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +153.592 +20 +-140.282 +11 +153.401 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +153.401 +20 +-140.282 +11 +153.211 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +153.211 +20 +-140.186 +11 +153.115 +21 +-140.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +153.115 +20 +-140.091 +11 +153.02 +21 +-139.901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +153.02 +20 +-139.901 +11 +152.925 +21 +-139.52 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +152.925 +20 +-139.52 +11 +152.925 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +152.925 +20 +-139.044 +11 +153.02 +21 +-138.663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +153.02 +20 +-138.663 +11 +153.115 +21 +-138.472 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +153.115 +20 +-138.472 +11 +153.211 +21 +-138.377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +153.211 +20 +-138.377 +11 +153.401 +21 +-138.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +154.925 +20 +-140.091 +11 +155.02 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +155.02 +20 +-140.186 +11 +154.925 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +154.925 +20 +-140.282 +11 +154.83 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +154.83 +20 +-140.186 +11 +154.925 +21 +-140.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +154.925 +20 +-140.091 +11 +154.925 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +156.925 +20 +-140.282 +11 +155.782 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +156.353 +20 +-140.282 +11 +156.353 +21 +-138.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +156.353 +20 +-138.282 +11 +156.163 +21 +-138.567 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +156.163 +20 +-138.567 +11 +155.972 +21 +-138.758 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +155.972 +20 +-138.758 +11 +155.782 +21 +-138.853 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +158.163 +20 +-138.282 +11 +158.353 +21 +-138.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +158.353 +20 +-138.282 +11 +158.544 +21 +-138.377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +158.544 +20 +-138.377 +11 +158.639 +21 +-138.472 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +158.639 +20 +-138.472 +11 +158.734 +21 +-138.663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +158.734 +20 +-138.663 +11 +158.83 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +158.83 +20 +-139.044 +11 +158.83 +21 +-139.52 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +158.83 +20 +-139.52 +11 +158.734 +21 +-139.901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +158.734 +20 +-139.901 +11 +158.639 +21 +-140.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +158.639 +20 +-140.091 +11 +158.544 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +158.544 +20 +-140.186 +11 +158.353 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +158.353 +20 +-140.282 +11 +158.163 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +158.163 +20 +-140.282 +11 +157.972 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +157.972 +20 +-140.186 +11 +157.877 +21 +-140.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +157.877 +20 +-140.091 +11 +157.782 +21 +-139.901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +157.782 +20 +-139.901 +11 +157.687 +21 +-139.52 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +157.687 +20 +-139.52 +11 +157.687 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +157.687 +20 +-139.044 +11 +157.782 +21 +-138.663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +157.782 +20 +-138.663 +11 +157.877 +21 +-138.472 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +157.877 +20 +-138.472 +11 +157.972 +21 +-138.377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +157.972 +20 +-138.377 +11 +158.163 +21 +-138.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +160.544 +20 +-138.282 +11 +160.163 +21 +-138.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +160.163 +20 +-138.282 +11 +159.972 +21 +-138.377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +159.972 +20 +-138.377 +11 +159.877 +21 +-138.472 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +159.877 +20 +-138.472 +11 +159.687 +21 +-138.758 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +159.687 +20 +-138.758 +11 +159.592 +21 +-139.139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +159.592 +20 +-139.139 +11 +159.592 +21 +-139.901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +159.592 +20 +-139.901 +11 +159.687 +21 +-140.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +159.687 +20 +-140.091 +11 +159.782 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +159.782 +20 +-140.186 +11 +159.972 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +159.972 +20 +-140.282 +11 +160.353 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +160.353 +20 +-140.282 +11 +160.544 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +160.544 +20 +-140.186 +11 +160.639 +21 +-140.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +160.639 +20 +-140.091 +11 +160.734 +21 +-139.901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +160.734 +20 +-139.901 +11 +160.734 +21 +-139.425 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +160.734 +20 +-139.425 +11 +160.639 +21 +-139.234 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +160.639 +20 +-139.234 +11 +160.544 +21 +-139.139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +160.544 +20 +-139.139 +11 +160.353 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +160.353 +20 +-139.044 +11 +159.972 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +159.972 +20 +-139.044 +11 +159.782 +21 +-139.139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +159.782 +20 +-139.139 +11 +159.687 +21 +-139.234 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +159.687 +20 +-139.234 +11 +159.592 +21 +-139.425 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +161.401 +20 +-138.282 +11 +162.639 +21 +-138.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +162.639 +20 +-138.282 +11 +161.972 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +161.972 +20 +-139.044 +11 +162.258 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +162.258 +20 +-139.044 +11 +162.449 +21 +-139.139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +162.449 +20 +-139.139 +11 +162.544 +21 +-139.234 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +162.544 +20 +-139.234 +11 +162.639 +21 +-139.425 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +162.639 +20 +-139.425 +11 +162.639 +21 +-139.901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +162.639 +20 +-139.901 +11 +162.544 +21 +-140.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +162.544 +20 +-140.091 +11 +162.449 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +162.449 +20 +-140.186 +11 +162.258 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +162.258 +20 +-140.282 +11 +161.687 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +161.687 +20 +-140.282 +11 +161.496 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +161.496 +20 +-140.186 +11 +161.401 +21 +-140.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +163.401 +20 +-138.282 +11 +163.401 +21 +-138.663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +164.163 +20 +-138.282 +11 +164.163 +21 +-138.663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +166.792 +20 +-141.044 +11 +166.696 +21 +-140.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +166.696 +20 +-140.948 +11 +166.506 +21 +-140.663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +166.506 +20 +-140.663 +11 +166.411 +21 +-140.472 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +166.411 +20 +-140.472 +11 +166.315 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +166.315 +20 +-140.186 +11 +166.22 +21 +-139.71 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +166.22 +20 +-139.71 +11 +166.22 +21 +-139.329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +166.22 +20 +-139.329 +11 +166.315 +21 +-138.853 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +166.315 +20 +-138.853 +11 +166.411 +21 +-138.567 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +166.411 +20 +-138.567 +11 +166.506 +21 +-138.377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +166.506 +20 +-138.377 +11 +166.696 +21 +-138.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +166.696 +20 +-138.091 +11 +166.792 +21 +-137.996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +167.934 +20 +-138.282 +11 +168.125 +21 +-138.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +168.125 +20 +-138.282 +11 +168.315 +21 +-138.377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +168.315 +20 +-138.377 +11 +168.411 +21 +-138.472 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +168.411 +20 +-138.472 +11 +168.506 +21 +-138.663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +168.506 +20 +-138.663 +11 +168.601 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +168.601 +20 +-139.044 +11 +168.601 +21 +-139.52 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +168.601 +20 +-139.52 +11 +168.506 +21 +-139.901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +168.506 +20 +-139.901 +11 +168.411 +21 +-140.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +168.411 +20 +-140.091 +11 +168.315 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +168.315 +20 +-140.186 +11 +168.125 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +168.125 +20 +-140.282 +11 +167.934 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +167.934 +20 +-140.282 +11 +167.744 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +167.744 +20 +-140.186 +11 +167.649 +21 +-140.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +167.649 +20 +-140.091 +11 +167.553 +21 +-139.901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +167.553 +20 +-139.901 +11 +167.458 +21 +-139.52 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +167.458 +20 +-139.52 +11 +167.458 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +167.458 +20 +-139.044 +11 +167.553 +21 +-138.663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +167.553 +20 +-138.663 +11 +167.649 +21 +-138.472 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +167.649 +20 +-138.472 +11 +167.744 +21 +-138.377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +167.744 +20 +-138.377 +11 +167.934 +21 +-138.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +170.658 +20 +-140.282 +11 +170.658 +21 +-138.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +171.515 +20 +-140.282 +11 +171.515 +21 +-139.234 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +171.515 +20 +-139.234 +11 +171.42 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +171.42 +20 +-139.044 +11 +171.23 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +171.23 +20 +-138.948 +11 +170.944 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +170.944 +20 +-138.948 +11 +170.753 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +170.753 +20 +-139.044 +11 +170.658 +21 +-139.139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +172.753 +20 +-140.282 +11 +172.563 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +172.563 +20 +-140.186 +11 +172.468 +21 +-140.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +172.468 +20 +-140.091 +11 +172.372 +21 +-139.901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +172.372 +20 +-139.901 +11 +172.372 +21 +-139.329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +172.372 +20 +-139.329 +11 +172.468 +21 +-139.139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +172.468 +20 +-139.139 +11 +172.563 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +172.563 +20 +-139.044 +11 +172.753 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +172.753 +20 +-138.948 +11 +173.039 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +173.039 +20 +-138.948 +11 +173.23 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +173.23 +20 +-139.044 +11 +173.325 +21 +-139.139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +173.325 +20 +-139.139 +11 +173.42 +21 +-139.329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +173.42 +20 +-139.329 +11 +173.42 +21 +-139.901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +173.42 +20 +-139.901 +11 +173.325 +21 +-140.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +173.325 +20 +-140.091 +11 +173.23 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +173.23 +20 +-140.186 +11 +173.039 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +173.039 +20 +-140.282 +11 +172.753 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +174.563 +20 +-140.282 +11 +174.372 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +174.372 +20 +-140.186 +11 +174.277 +21 +-139.996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +174.277 +20 +-139.996 +11 +174.277 +21 +-138.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +176.087 +20 +-140.186 +11 +175.896 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +175.896 +20 +-140.282 +11 +175.515 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +175.515 +20 +-140.282 +11 +175.325 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +175.325 +20 +-140.186 +11 +175.23 +21 +-139.996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +175.23 +20 +-139.996 +11 +175.23 +21 +-139.234 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +175.23 +20 +-139.234 +11 +175.325 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +175.325 +20 +-139.044 +11 +175.515 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +175.515 +20 +-138.948 +11 +175.896 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +175.896 +20 +-138.948 +11 +176.087 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +176.087 +20 +-139.044 +11 +176.182 +21 +-139.234 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +176.182 +20 +-139.234 +11 +176.182 +21 +-139.425 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +176.182 +20 +-139.425 +11 +175.23 +21 +-139.615 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +176.944 +20 +-140.186 +11 +177.134 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +177.134 +20 +-140.282 +11 +177.515 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +177.515 +20 +-140.282 +11 +177.706 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +177.706 +20 +-140.186 +11 +177.801 +21 +-139.996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +177.801 +20 +-139.996 +11 +177.801 +21 +-139.901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +177.801 +20 +-139.901 +11 +177.706 +21 +-139.71 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +177.706 +20 +-139.71 +11 +177.515 +21 +-139.615 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +177.515 +20 +-139.615 +11 +177.23 +21 +-139.615 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +177.23 +20 +-139.615 +11 +177.039 +21 +-139.52 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +177.039 +20 +-139.52 +11 +176.944 +21 +-139.329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +176.944 +20 +-139.329 +11 +176.944 +21 +-139.234 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +176.944 +20 +-139.234 +11 +177.039 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +177.039 +20 +-139.044 +11 +177.23 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +177.23 +20 +-138.948 +11 +177.515 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +177.515 +20 +-138.948 +11 +177.706 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +179.858 +20 +-139.52 +11 +181.382 +21 +-139.52 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +180.62 +20 +-140.282 +11 +180.62 +21 +-138.758 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +183.439 +20 +-138.472 +11 +183.534 +21 +-138.377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +183.534 +20 +-138.377 +11 +183.725 +21 +-138.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +183.725 +20 +-138.282 +11 +184.201 +21 +-138.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +184.201 +20 +-138.282 +11 +184.392 +21 +-138.377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +184.392 +20 +-138.377 +11 +184.487 +21 +-138.472 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +184.487 +20 +-138.472 +11 +184.582 +21 +-138.663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +184.582 +20 +-138.663 +11 +184.582 +21 +-138.853 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +184.582 +20 +-138.853 +11 +184.487 +21 +-139.139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +184.487 +20 +-139.139 +11 +183.344 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +183.344 +20 +-140.282 +11 +184.582 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +186.544 +20 +-140.186 +11 +186.734 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +186.734 +20 +-140.282 +11 +187.115 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +187.115 +20 +-140.282 +11 +187.306 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +187.306 +20 +-140.186 +11 +187.401 +21 +-139.996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +187.401 +20 +-139.996 +11 +187.401 +21 +-139.901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +187.401 +20 +-139.901 +11 +187.306 +21 +-139.71 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +187.306 +20 +-139.71 +11 +187.115 +21 +-139.615 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +187.115 +20 +-139.615 +11 +186.83 +21 +-139.615 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +186.83 +20 +-139.615 +11 +186.639 +21 +-139.52 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +186.639 +20 +-139.52 +11 +186.544 +21 +-139.329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +186.544 +20 +-139.329 +11 +186.544 +21 +-139.234 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +186.544 +20 +-139.234 +11 +186.639 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +186.639 +20 +-139.044 +11 +186.83 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +186.83 +20 +-138.948 +11 +187.115 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +187.115 +20 +-138.948 +11 +187.306 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +188.544 +20 +-140.282 +11 +188.353 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +188.353 +20 +-140.186 +11 +188.258 +21 +-139.996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +188.258 +20 +-139.996 +11 +188.258 +21 +-138.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +189.592 +20 +-140.282 +11 +189.401 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +189.401 +20 +-140.186 +11 +189.306 +21 +-140.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +189.306 +20 +-140.091 +11 +189.211 +21 +-139.901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +189.211 +20 +-139.901 +11 +189.211 +21 +-139.329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +189.211 +20 +-139.329 +11 +189.306 +21 +-139.139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +189.306 +20 +-139.139 +11 +189.401 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +189.401 +20 +-139.044 +11 +189.592 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +189.592 +20 +-138.948 +11 +189.877 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +189.877 +20 +-138.948 +11 +190.068 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +190.068 +20 +-139.044 +11 +190.163 +21 +-139.139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +190.163 +20 +-139.139 +11 +190.258 +21 +-139.329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +190.258 +20 +-139.329 +11 +190.258 +21 +-139.901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +190.258 +20 +-139.901 +11 +190.163 +21 +-140.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +190.163 +20 +-140.091 +11 +190.068 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +190.068 +20 +-140.186 +11 +189.877 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +189.877 +20 +-140.282 +11 +189.592 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +190.83 +20 +-138.948 +11 +191.592 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +191.115 +20 +-138.282 +11 +191.115 +21 +-139.996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +191.115 +20 +-139.996 +11 +191.211 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +191.211 +20 +-140.186 +11 +191.401 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +191.401 +20 +-140.282 +11 +191.592 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +192.163 +20 +-140.186 +11 +192.353 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +192.353 +20 +-140.282 +11 +192.734 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +192.734 +20 +-140.282 +11 +192.925 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +192.925 +20 +-140.186 +11 +193.02 +21 +-139.996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +193.02 +20 +-139.996 +11 +193.02 +21 +-139.901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +193.02 +20 +-139.901 +11 +192.925 +21 +-139.71 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +192.925 +20 +-139.71 +11 +192.734 +21 +-139.615 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +192.734 +20 +-139.615 +11 +192.449 +21 +-139.615 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +192.449 +20 +-139.615 +11 +192.258 +21 +-139.52 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +192.258 +20 +-139.52 +11 +192.163 +21 +-139.329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +192.163 +20 +-139.329 +11 +192.163 +21 +-139.234 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +192.163 +20 +-139.234 +11 +192.258 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +192.258 +20 +-139.044 +11 +192.449 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +192.449 +20 +-138.948 +11 +192.734 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +192.734 +20 +-138.948 +11 +192.925 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +193.687 +20 +-141.044 +11 +193.782 +21 +-140.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +193.782 +20 +-140.948 +11 +193.972 +21 +-140.663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +193.972 +20 +-140.663 +11 +194.068 +21 +-140.472 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +194.068 +20 +-140.472 +11 +194.163 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +194.163 +20 +-140.186 +11 +194.258 +21 +-139.71 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +194.258 +20 +-139.71 +11 +194.258 +21 +-139.329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +194.258 +20 +-139.329 +11 +194.163 +21 +-138.853 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +194.163 +20 +-138.853 +11 +194.068 +21 +-138.567 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +194.068 +20 +-138.567 +11 +193.972 +21 +-138.377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +193.972 +20 +-138.377 +11 +193.782 +21 +-138.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +193.782 +20 +-138.091 +11 +193.687 +21 +-137.996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +196.982 +20 +-141.044 +11 +196.887 +21 +-140.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +196.887 +20 +-140.948 +11 +196.696 +21 +-140.663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +196.696 +20 +-140.663 +11 +196.601 +21 +-140.472 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +196.601 +20 +-140.472 +11 +196.506 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +196.506 +20 +-140.186 +11 +196.411 +21 +-139.71 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +196.411 +20 +-139.71 +11 +196.411 +21 +-139.329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +196.411 +20 +-139.329 +11 +196.506 +21 +-138.853 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +196.506 +20 +-138.853 +11 +196.601 +21 +-138.567 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +196.601 +20 +-138.567 +11 +196.696 +21 +-138.377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +196.696 +20 +-138.377 +11 +196.887 +21 +-138.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +196.887 +20 +-138.091 +11 +196.982 +21 +-137.996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +197.744 +20 +-138.948 +11 +197.744 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +197.744 +20 +-139.139 +11 +197.839 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +197.839 +20 +-139.044 +11 +198.03 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +198.03 +20 +-138.948 +11 +198.315 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +198.315 +20 +-138.948 +11 +198.506 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +198.506 +20 +-139.044 +11 +198.601 +21 +-139.234 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +198.601 +20 +-139.234 +11 +198.601 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +199.839 +20 +-140.282 +11 +199.649 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +199.649 +20 +-140.186 +11 +199.553 +21 +-140.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +199.553 +20 +-140.091 +11 +199.458 +21 +-139.901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +199.458 +20 +-139.901 +11 +199.458 +21 +-139.329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +199.458 +20 +-139.329 +11 +199.553 +21 +-139.139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +199.553 +20 +-139.139 +11 +199.649 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +199.649 +20 +-139.044 +11 +199.839 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +199.839 +20 +-138.948 +11 +200.125 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +200.125 +20 +-138.948 +11 +200.315 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +200.315 +20 +-139.044 +11 +200.411 +21 +-139.139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +200.411 +20 +-139.139 +11 +200.506 +21 +-139.329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +200.506 +20 +-139.329 +11 +200.506 +21 +-139.901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +200.506 +20 +-139.901 +11 +200.411 +21 +-140.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +200.411 +20 +-140.091 +11 +200.315 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +200.315 +20 +-140.186 +11 +200.125 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +200.125 +20 +-140.282 +11 +199.839 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +201.077 +20 +-138.948 +11 +201.839 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +201.363 +20 +-138.282 +11 +201.363 +21 +-139.996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +201.363 +20 +-139.996 +11 +201.458 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +201.458 +20 +-140.186 +11 +201.649 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +201.649 +20 +-140.282 +11 +201.839 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +203.706 +20 +-138.948 +11 +203.706 +21 +-140.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +203.706 +20 +-139.044 +11 +203.896 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +203.896 +20 +-138.948 +11 +204.277 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +204.277 +20 +-138.948 +11 +204.468 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +204.468 +20 +-139.044 +11 +204.563 +21 +-139.139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +204.563 +20 +-139.139 +11 +204.658 +21 +-139.329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +204.658 +20 +-139.329 +11 +204.658 +21 +-139.901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +204.658 +20 +-139.901 +11 +204.563 +21 +-140.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +204.563 +20 +-140.091 +11 +204.468 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +204.468 +20 +-140.186 +11 +204.277 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +204.277 +20 +-140.282 +11 +203.896 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +203.896 +20 +-140.282 +11 +203.706 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +205.801 +20 +-140.282 +11 +205.611 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +205.611 +20 +-140.186 +11 +205.515 +21 +-139.996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +205.515 +20 +-139.996 +11 +205.515 +21 +-138.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +207.42 +20 +-140.282 +11 +207.42 +21 +-139.234 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +207.42 +20 +-139.234 +11 +207.325 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +207.325 +20 +-139.044 +11 +207.134 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +207.134 +20 +-138.948 +11 +206.753 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +206.753 +20 +-138.948 +11 +206.563 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +207.42 +20 +-140.186 +11 +207.23 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +207.23 +20 +-140.282 +11 +206.753 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +206.753 +20 +-140.282 +11 +206.563 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +206.563 +20 +-140.186 +11 +206.468 +21 +-139.996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +206.468 +20 +-139.996 +11 +206.468 +21 +-139.805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +206.468 +20 +-139.805 +11 +206.563 +21 +-139.615 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +206.563 +20 +-139.615 +11 +206.753 +21 +-139.52 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +206.753 +20 +-139.52 +11 +207.23 +21 +-139.52 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +207.23 +20 +-139.52 +11 +207.42 +21 +-139.425 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +208.087 +20 +-138.948 +11 +208.849 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +208.372 +20 +-138.282 +11 +208.372 +21 +-139.996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +208.372 +20 +-139.996 +11 +208.468 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +208.468 +20 +-140.186 +11 +208.658 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +208.658 +20 +-140.282 +11 +208.849 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +210.277 +20 +-140.186 +11 +210.087 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +210.087 +20 +-140.282 +11 +209.706 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +209.706 +20 +-140.282 +11 +209.515 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +209.515 +20 +-140.186 +11 +209.42 +21 +-139.996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +209.42 +20 +-139.996 +11 +209.42 +21 +-139.234 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +209.42 +20 +-139.234 +11 +209.515 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +209.515 +20 +-139.044 +11 +209.706 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +209.706 +20 +-138.948 +11 +210.087 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +210.087 +20 +-138.948 +11 +210.277 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +210.277 +20 +-139.044 +11 +210.372 +21 +-139.234 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +210.372 +20 +-139.234 +11 +210.372 +21 +-139.425 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +210.372 +20 +-139.425 +11 +209.42 +21 +-139.615 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +212.087 +20 +-140.282 +11 +212.087 +21 +-138.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +212.087 +20 +-140.186 +11 +211.896 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +211.896 +20 +-140.282 +11 +211.515 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +211.515 +20 +-140.282 +11 +211.325 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +211.325 +20 +-140.186 +11 +211.23 +21 +-140.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +211.23 +20 +-140.091 +11 +211.134 +21 +-139.901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +211.134 +20 +-139.901 +11 +211.134 +21 +-139.329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +211.134 +20 +-139.329 +11 +211.23 +21 +-139.139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +211.23 +20 +-139.139 +11 +211.325 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +211.325 +20 +-139.044 +11 +211.515 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +211.515 +20 +-138.948 +11 +211.896 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +211.896 +20 +-138.948 +11 +212.087 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +212.849 +20 +-141.044 +11 +212.944 +21 +-140.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +212.944 +20 +-140.948 +11 +213.134 +21 +-140.663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +213.134 +20 +-140.663 +11 +213.23 +21 +-140.472 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +213.23 +20 +-140.472 +11 +213.325 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +213.325 +20 +-140.186 +11 +213.42 +21 +-139.71 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +213.42 +20 +-139.71 +11 +213.42 +21 +-139.329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +213.42 +20 +-139.329 +11 +213.325 +21 +-138.853 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +213.325 +20 +-138.853 +11 +213.23 +21 +-138.567 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +213.23 +20 +-138.567 +11 +213.134 +21 +-138.377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +213.134 +20 +-138.377 +11 +212.944 +21 +-138.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +212.944 +20 +-138.091 +11 +212.849 +21 +-137.996 + 0 +ENDSEC + 0 +EOF diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/DXF/StudioMic-NPTH.drl b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/DXF/StudioMic-NPTH.drl new file mode 100755 index 0000000..6cc80cb --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/DXF/StudioMic-NPTH.drl @@ -0,0 +1,26 @@ +M48 +; DRILL file {KiCad (7.0.0)} date Sat Mar 18 07:42:43 2023 +; FORMAT={-:-/ absolute / metric / decimal} +; #@! TF.CreationDate,2023-03-18T07:42:43+03:00 +; #@! TF.GenerationSoftware,Kicad,Pcbnew,(7.0.0) +; #@! TF.FileFunction,NonPlated,1,2,NPTH +FMAT,2 +METRIC +; #@! TA.AperFunction,NonPlated,NPTH,ComponentDrill +T1C2.700 +% +G90 +G05 +T1 +G00X137.744Y-51.397 +M15 +G01X138.544Y-51.397 +M16 +G05 +G00X166.744Y-51.397 +M15 +G01X167.544Y-51.397 +M16 +G05 +T0 +M30 diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/DXF/StudioMic-PTH-drl_map.dxf b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/DXF/StudioMic-PTH-drl_map.dxf new file mode 100755 index 0000000..cfe2302 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/DXF/StudioMic-PTH-drl_map.dxf @@ -0,0 +1,5482 @@ + 0 +SECTION + 2 +HEADER + 9 +$ANGBASE + 50 +0.0 + 9 +$ANGDIR + 70 +1 + 9 +$MEASUREMENT + 70 +1 + 0 +ENDSEC + 0 +SECTION + 2 +TABLES + 0 +TABLE + 2 +LTYPE + 70 +4 + 0 +LTYPE + 5 +40F + 2 +CONTINUOUS + 70 +0 + 3 +Solid line + 72 +65 + 73 +0 + 40 +0.0 + 0 +LTYPE + 5 +410 + 2 +DASHDOT + 70 +0 + 3 +Dash Dot ____ _ ____ _ + 72 +65 + 73 +4 + 40 +2.0 + 49 +1.25 + 49 +-0.25 + 49 +0.25 + 49 +-0.25 + 0 +LTYPE + 5 +411 + 2 +DASHED + 70 +0 + 3 +Dashed __ __ __ __ __ + 72 +65 + 73 +2 + 40 +0.75 + 49 +0.5 + 49 +-0.25 + 0 +LTYPE + 5 +43B + 2 +DOTTED + 70 +0 + 3 +Dotted . . . . + 72 +65 + 73 +2 + 40 +0.2 + 49 +0.0 + 49 +-0.2 + 0 +ENDTAB + 0 +TABLE + 2 +STYLE + 70 +4 + 0 +STYLE + 2 +KICAD + 70 +0 + 40 +0 + 41 +1 + 42 +1 + 50 +0 + 71 +0 + 3 +isocp.shx + 0 +STYLE + 2 +KICADB + 70 +0 + 40 +0 + 41 +1 + 42 +1 + 50 +0 + 71 +0 + 3 +isocp.shx + 0 +STYLE + 2 +KICADI + 70 +0 + 40 +0 + 41 +1 + 42 +1 + 50 +15 + 71 +0 + 3 +isocp.shx + 0 +STYLE + 2 +KICADBI + 70 +0 + 40 +0 + 41 +1 + 42 +1 + 50 +15 + 71 +0 + 3 +isocp.shx + 0 +ENDTAB + 0 +TABLE + 2 +LAYER + 70 +1 + 0 +LAYER + 2 +BLACK + 70 +0 + 62 +7 + 6 +CONTINUOUS + 0 +ENDTAB + 0 +ENDSEC + 0 +SECTION + 2 +ENTITIES +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +169.644 +20 +-130.141 +11 +169.736 +21 +-130.141 +0 +ARC +8 +BLACK +10 +135.664 +20 +-133.095 +40 +2.95622 +50 +-0.000290722 +51 +90.0003 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +135.664 +20 +-130.139 +11 +135.572 +21 +-130.139 +0 +ARC +8 +BLACK +10 +171.817 +20 +-49.3732 +40 +1.27633 +50 +-0 +51 +90 +0 +ARC +8 +BLACK +10 +133.47 +20 +-49.3732 +40 +1.27633 +50 +90 +51 +180 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +132.194 +20 +-49.3732 +11 +135.572 +21 +-130.139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +133.47 +20 +-48.0969 +11 +171.817 +21 +-48.0969 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +173.093 +20 +-49.3732 +11 +169.736 +21 +-130.141 +0 +ARC +8 +BLACK +10 +169.644 +20 +-133.097 +40 +2.95622 +50 +89.9997 +51 +180 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +138.621 +20 +-133.095 +11 +166.687 +21 +-133.097 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +143.264 +20 +-107.831 +11 +144.264 +21 +-108.831 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +144.264 +20 +-107.831 +11 +143.264 +21 +-108.831 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +144.534 +20 +-59.063 +11 +145.534 +21 +-60.063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +145.534 +20 +-59.063 +11 +144.534 +21 +-60.063 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +147.455 +20 +-77.732 +11 +148.455 +21 +-78.732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +148.455 +20 +-77.732 +11 +147.455 +21 +-78.732 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +149.891 +20 +-71.255 +11 +150.891 +21 +-72.255 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +150.891 +20 +-71.255 +11 +149.891 +21 +-72.255 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +151.138 +20 +-106.434 +11 +152.138 +21 +-107.434 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +152.138 +20 +-106.434 +11 +151.138 +21 +-107.434 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +152.916 +20 +-59.317 +11 +153.916 +21 +-60.317 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +153.916 +20 +-59.317 +11 +152.916 +21 +-60.317 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +153.17 +20 +-77.224 +11 +154.17 +21 +-78.224 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +154.17 +20 +-77.224 +11 +153.17 +21 +-78.224 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +154.322 +20 +-67.3275 +11 +155.322 +21 +-68.3275 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +155.322 +20 +-67.3275 +11 +154.322 +21 +-68.3275 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +157.742 +20 +-55.888 +11 +158.742 +21 +-56.888 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +158.742 +20 +-55.888 +11 +157.742 +21 +-56.888 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +162.187 +20 +-57.539 +11 +163.187 +21 +-58.539 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +163.187 +20 +-57.539 +11 +162.187 +21 +-58.539 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +162.822 +20 +-103.513 +11 +163.822 +21 +-104.513 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +163.822 +20 +-103.513 +11 +162.822 +21 +-104.513 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +162.822 +20 +-108.593 +11 +163.822 +21 +-109.593 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +163.822 +20 +-108.593 +11 +162.822 +21 +-109.593 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +134.62 +20 +-136.082 +11 +134.62 +21 +-134.082 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +134.62 +20 +-134.082 +11 +135.096 +21 +-134.082 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +135.096 +20 +-134.082 +11 +135.382 +21 +-134.177 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +135.382 +20 +-134.177 +11 +135.572 +21 +-134.367 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +135.572 +20 +-134.367 +11 +135.668 +21 +-134.558 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +135.668 +20 +-134.558 +11 +135.763 +21 +-134.939 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +135.763 +20 +-134.939 +11 +135.763 +21 +-135.225 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +135.763 +20 +-135.225 +11 +135.668 +21 +-135.605 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +135.668 +20 +-135.605 +11 +135.572 +21 +-135.796 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +135.572 +20 +-135.796 +11 +135.382 +21 +-135.986 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +135.382 +20 +-135.986 +11 +135.096 +21 +-136.082 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +135.096 +20 +-136.082 +11 +134.62 +21 +-136.082 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +136.62 +20 +-136.082 +11 +136.62 +21 +-134.748 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +136.62 +20 +-135.129 +11 +136.715 +21 +-134.939 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +136.715 +20 +-134.939 +11 +136.811 +21 +-134.844 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +136.811 +20 +-134.844 +11 +137.001 +21 +-134.748 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +137.001 +20 +-134.748 +11 +137.192 +21 +-134.748 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +137.858 +20 +-136.082 +11 +137.858 +21 +-134.748 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +137.858 +20 +-134.082 +11 +137.763 +21 +-134.177 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +137.763 +20 +-134.177 +11 +137.858 +21 +-134.272 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +137.858 +20 +-134.272 +11 +137.953 +21 +-134.177 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +137.953 +20 +-134.177 +11 +137.858 +21 +-134.082 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +137.858 +20 +-134.082 +11 +137.858 +21 +-134.272 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +139.096 +20 +-136.082 +11 +138.906 +21 +-135.986 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +138.906 +20 +-135.986 +11 +138.811 +21 +-135.796 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +138.811 +20 +-135.796 +11 +138.811 +21 +-134.082 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +140.144 +20 +-136.082 +11 +139.953 +21 +-135.986 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +139.953 +20 +-135.986 +11 +139.858 +21 +-135.796 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +139.858 +20 +-135.796 +11 +139.858 +21 +-134.082 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +142.106 +20 +-136.082 +11 +142.106 +21 +-134.082 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +142.106 +20 +-134.082 +11 +142.772 +21 +-135.51 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +142.772 +20 +-135.51 +11 +143.439 +21 +-134.082 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +143.439 +20 +-134.082 +11 +143.439 +21 +-136.082 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +145.249 +20 +-136.082 +11 +145.249 +21 +-135.034 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +145.249 +20 +-135.034 +11 +145.153 +21 +-134.844 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +145.153 +20 +-134.844 +11 +144.963 +21 +-134.748 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +144.963 +20 +-134.748 +11 +144.582 +21 +-134.748 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +144.582 +20 +-134.748 +11 +144.392 +21 +-134.844 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +145.249 +20 +-135.986 +11 +145.058 +21 +-136.082 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +145.058 +20 +-136.082 +11 +144.582 +21 +-136.082 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +144.582 +20 +-136.082 +11 +144.392 +21 +-135.986 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +144.392 +20 +-135.986 +11 +144.296 +21 +-135.796 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +144.296 +20 +-135.796 +11 +144.296 +21 +-135.605 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +144.296 +20 +-135.605 +11 +144.392 +21 +-135.415 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +144.392 +20 +-135.415 +11 +144.582 +21 +-135.32 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +144.582 +20 +-135.32 +11 +145.058 +21 +-135.32 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +145.058 +20 +-135.32 +11 +145.249 +21 +-135.225 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +146.201 +20 +-134.748 +11 +146.201 +21 +-136.748 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +146.201 +20 +-134.844 +11 +146.392 +21 +-134.748 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +146.392 +20 +-134.748 +11 +146.772 +21 +-134.748 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +146.772 +20 +-134.748 +11 +146.963 +21 +-134.844 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +146.963 +20 +-134.844 +11 +147.058 +21 +-134.939 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +147.058 +20 +-134.939 +11 +147.153 +21 +-135.129 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +147.153 +20 +-135.129 +11 +147.153 +21 +-135.701 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +147.153 +20 +-135.701 +11 +147.058 +21 +-135.891 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +147.058 +20 +-135.891 +11 +146.963 +21 +-135.986 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +146.963 +20 +-135.986 +11 +146.772 +21 +-136.082 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +146.772 +20 +-136.082 +11 +146.392 +21 +-136.082 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +146.392 +20 +-136.082 +11 +146.201 +21 +-135.986 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +148.011 +20 +-135.891 +11 +148.106 +21 +-135.986 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +148.106 +20 +-135.986 +11 +148.011 +21 +-136.082 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +148.011 +20 +-136.082 +11 +147.915 +21 +-135.986 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +147.915 +20 +-135.986 +11 +148.011 +21 +-135.891 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +148.011 +20 +-135.891 +11 +148.011 +21 +-136.082 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +148.011 +20 +-134.844 +11 +148.106 +21 +-134.939 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +148.106 +20 +-134.939 +11 +148.011 +21 +-135.034 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +148.011 +20 +-135.034 +11 +147.915 +21 +-134.939 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +147.915 +20 +-134.939 +11 +148.011 +21 +-134.844 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +148.011 +20 +-134.844 +11 +148.011 +21 +-135.034 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +131.144 +20 +-139.047 +11 +132.144 +21 +-140.047 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +132.144 +20 +-139.047 +11 +131.144 +21 +-140.047 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +135.668 +20 +-140.282 +11 +134.525 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +135.096 +20 +-140.282 +11 +135.096 +21 +-138.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +135.096 +20 +-138.282 +11 +134.906 +21 +-138.567 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +134.906 +20 +-138.567 +11 +134.715 +21 +-138.758 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +134.715 +20 +-138.758 +11 +134.525 +21 +-138.853 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +136.525 +20 +-140.091 +11 +136.62 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +136.62 +20 +-140.186 +11 +136.525 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +136.525 +20 +-140.282 +11 +136.43 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +136.43 +20 +-140.186 +11 +136.525 +21 +-140.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +136.525 +20 +-140.091 +11 +136.525 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +137.858 +20 +-138.282 +11 +138.049 +21 +-138.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +138.049 +20 +-138.282 +11 +138.239 +21 +-138.377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +138.239 +20 +-138.377 +11 +138.334 +21 +-138.472 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +138.334 +20 +-138.472 +11 +138.43 +21 +-138.663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +138.43 +20 +-138.663 +11 +138.525 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +138.525 +20 +-139.044 +11 +138.525 +21 +-139.52 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +138.525 +20 +-139.52 +11 +138.43 +21 +-139.901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +138.43 +20 +-139.901 +11 +138.334 +21 +-140.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +138.334 +20 +-140.091 +11 +138.239 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +138.239 +20 +-140.186 +11 +138.049 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +138.049 +20 +-140.282 +11 +137.858 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +137.858 +20 +-140.282 +11 +137.668 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +137.668 +20 +-140.186 +11 +137.572 +21 +-140.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +137.572 +20 +-140.091 +11 +137.477 +21 +-139.901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +137.477 +20 +-139.901 +11 +137.382 +21 +-139.52 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +137.382 +20 +-139.52 +11 +137.382 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +137.382 +20 +-139.044 +11 +137.477 +21 +-138.663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +137.477 +20 +-138.663 +11 +137.572 +21 +-138.472 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +137.572 +20 +-138.472 +11 +137.668 +21 +-138.377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +137.668 +20 +-138.377 +11 +137.858 +21 +-138.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +139.763 +20 +-138.282 +11 +139.953 +21 +-138.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +139.953 +20 +-138.282 +11 +140.144 +21 +-138.377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +140.144 +20 +-138.377 +11 +140.239 +21 +-138.472 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +140.239 +20 +-138.472 +11 +140.334 +21 +-138.663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +140.334 +20 +-138.663 +11 +140.43 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +140.43 +20 +-139.044 +11 +140.43 +21 +-139.52 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +140.43 +20 +-139.52 +11 +140.334 +21 +-139.901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +140.334 +20 +-139.901 +11 +140.239 +21 +-140.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +140.239 +20 +-140.091 +11 +140.144 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +140.144 +20 +-140.186 +11 +139.953 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +139.953 +20 +-140.282 +11 +139.763 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +139.763 +20 +-140.282 +11 +139.572 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +139.572 +20 +-140.186 +11 +139.477 +21 +-140.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +139.477 +20 +-140.091 +11 +139.382 +21 +-139.901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +139.382 +20 +-139.901 +11 +139.287 +21 +-139.52 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +139.287 +20 +-139.52 +11 +139.287 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +139.287 +20 +-139.044 +11 +139.382 +21 +-138.663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +139.382 +20 +-138.663 +11 +139.477 +21 +-138.472 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +139.477 +20 +-138.472 +11 +139.572 +21 +-138.377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +139.572 +20 +-138.377 +11 +139.763 +21 +-138.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +141.668 +20 +-138.282 +11 +141.858 +21 +-138.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +141.858 +20 +-138.282 +11 +142.049 +21 +-138.377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +142.049 +20 +-138.377 +11 +142.144 +21 +-138.472 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +142.144 +20 +-138.472 +11 +142.239 +21 +-138.663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +142.239 +20 +-138.663 +11 +142.334 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +142.334 +20 +-139.044 +11 +142.334 +21 +-139.52 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +142.334 +20 +-139.52 +11 +142.239 +21 +-139.901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +142.239 +20 +-139.901 +11 +142.144 +21 +-140.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +142.144 +20 +-140.091 +11 +142.049 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +142.049 +20 +-140.186 +11 +141.858 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +141.858 +20 +-140.282 +11 +141.668 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +141.668 +20 +-140.282 +11 +141.477 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +141.477 +20 +-140.186 +11 +141.382 +21 +-140.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +141.382 +20 +-140.091 +11 +141.287 +21 +-139.901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +141.287 +20 +-139.901 +11 +141.192 +21 +-139.52 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +141.192 +20 +-139.52 +11 +141.192 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +141.192 +20 +-139.044 +11 +141.287 +21 +-138.663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +141.287 +20 +-138.663 +11 +141.382 +21 +-138.472 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +141.382 +20 +-138.472 +11 +141.477 +21 +-138.377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +141.477 +20 +-138.377 +11 +141.668 +21 +-138.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +143.192 +20 +-140.282 +11 +143.192 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +143.192 +20 +-139.139 +11 +143.287 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +143.287 +20 +-139.044 +11 +143.477 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +143.477 +20 +-138.948 +11 +143.763 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +143.763 +20 +-138.948 +11 +143.953 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +143.953 +20 +-139.044 +11 +144.049 +21 +-139.234 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +144.049 +20 +-139.234 +11 +144.049 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +144.049 +20 +-139.234 +11 +144.144 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +144.144 +20 +-139.044 +11 +144.334 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +144.334 +20 +-138.948 +11 +144.62 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +144.62 +20 +-138.948 +11 +144.811 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +144.811 +20 +-139.044 +11 +144.906 +21 +-139.234 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +144.906 +20 +-139.234 +11 +144.906 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +145.858 +20 +-140.282 +11 +145.858 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +145.858 +20 +-139.139 +11 +145.953 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +145.953 +20 +-139.044 +11 +146.144 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +146.144 +20 +-138.948 +11 +146.43 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +146.43 +20 +-138.948 +11 +146.62 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +146.62 +20 +-139.044 +11 +146.715 +21 +-139.234 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +146.715 +20 +-139.234 +11 +146.715 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +146.715 +20 +-139.234 +11 +146.811 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +146.811 +20 +-139.044 +11 +147.001 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +147.001 +20 +-138.948 +11 +147.287 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +147.287 +20 +-138.948 +11 +147.477 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +147.477 +20 +-139.044 +11 +147.572 +21 +-139.234 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +147.572 +20 +-139.234 +11 +147.572 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +151.153 +20 +-138.186 +11 +149.439 +21 +-140.758 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +153.401 +20 +-138.282 +11 +153.592 +21 +-138.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +153.592 +20 +-138.282 +11 +153.782 +21 +-138.377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +153.782 +20 +-138.377 +11 +153.877 +21 +-138.472 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +153.877 +20 +-138.472 +11 +153.972 +21 +-138.663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +153.972 +20 +-138.663 +11 +154.068 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +154.068 +20 +-139.044 +11 +154.068 +21 +-139.52 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +154.068 +20 +-139.52 +11 +153.972 +21 +-139.901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +153.972 +20 +-139.901 +11 +153.877 +21 +-140.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +153.877 +20 +-140.091 +11 +153.782 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +153.782 +20 +-140.186 +11 +153.592 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +153.592 +20 +-140.282 +11 +153.401 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +153.401 +20 +-140.282 +11 +153.211 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +153.211 +20 +-140.186 +11 +153.115 +21 +-140.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +153.115 +20 +-140.091 +11 +153.02 +21 +-139.901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +153.02 +20 +-139.901 +11 +152.925 +21 +-139.52 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +152.925 +20 +-139.52 +11 +152.925 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +152.925 +20 +-139.044 +11 +153.02 +21 +-138.663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +153.02 +20 +-138.663 +11 +153.115 +21 +-138.472 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +153.115 +20 +-138.472 +11 +153.211 +21 +-138.377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +153.211 +20 +-138.377 +11 +153.401 +21 +-138.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +154.925 +20 +-140.091 +11 +155.02 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +155.02 +20 +-140.186 +11 +154.925 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +154.925 +20 +-140.282 +11 +154.83 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +154.83 +20 +-140.186 +11 +154.925 +21 +-140.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +154.925 +20 +-140.091 +11 +154.925 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +156.258 +20 +-138.282 +11 +156.449 +21 +-138.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +156.449 +20 +-138.282 +11 +156.639 +21 +-138.377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +156.639 +20 +-138.377 +11 +156.734 +21 +-138.472 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +156.734 +20 +-138.472 +11 +156.83 +21 +-138.663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +156.83 +20 +-138.663 +11 +156.925 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +156.925 +20 +-139.044 +11 +156.925 +21 +-139.52 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +156.925 +20 +-139.52 +11 +156.83 +21 +-139.901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +156.83 +20 +-139.901 +11 +156.734 +21 +-140.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +156.734 +20 +-140.091 +11 +156.639 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +156.639 +20 +-140.186 +11 +156.449 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +156.449 +20 +-140.282 +11 +156.258 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +156.258 +20 +-140.282 +11 +156.068 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +156.068 +20 +-140.186 +11 +155.972 +21 +-140.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +155.972 +20 +-140.091 +11 +155.877 +21 +-139.901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +155.877 +20 +-139.901 +11 +155.782 +21 +-139.52 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +155.782 +20 +-139.52 +11 +155.782 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +155.782 +20 +-139.044 +11 +155.877 +21 +-138.663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +155.877 +20 +-138.663 +11 +155.972 +21 +-138.472 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +155.972 +20 +-138.472 +11 +156.068 +21 +-138.377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +156.068 +20 +-138.377 +11 +156.258 +21 +-138.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +157.592 +20 +-138.282 +11 +158.83 +21 +-138.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +158.83 +20 +-138.282 +11 +158.163 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +158.163 +20 +-139.044 +11 +158.449 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +158.449 +20 +-139.044 +11 +158.639 +21 +-139.139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +158.639 +20 +-139.139 +11 +158.734 +21 +-139.234 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +158.734 +20 +-139.234 +11 +158.83 +21 +-139.425 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +158.83 +20 +-139.425 +11 +158.83 +21 +-139.901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +158.83 +20 +-139.901 +11 +158.734 +21 +-140.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +158.734 +20 +-140.091 +11 +158.639 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +158.639 +20 +-140.186 +11 +158.449 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +158.449 +20 +-140.282 +11 +157.877 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +157.877 +20 +-140.282 +11 +157.687 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +157.687 +20 +-140.186 +11 +157.592 +21 +-140.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +159.782 +20 +-140.282 +11 +160.163 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +160.163 +20 +-140.282 +11 +160.353 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +160.353 +20 +-140.186 +11 +160.449 +21 +-140.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +160.449 +20 +-140.091 +11 +160.639 +21 +-139.805 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +160.639 +20 +-139.805 +11 +160.734 +21 +-139.425 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +160.734 +20 +-139.425 +11 +160.734 +21 +-138.663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +160.734 +20 +-138.663 +11 +160.639 +21 +-138.472 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +160.639 +20 +-138.472 +11 +160.544 +21 +-138.377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +160.544 +20 +-138.377 +11 +160.353 +21 +-138.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +160.353 +20 +-138.282 +11 +159.972 +21 +-138.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +159.972 +20 +-138.282 +11 +159.782 +21 +-138.377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +159.782 +20 +-138.377 +11 +159.687 +21 +-138.472 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +159.687 +20 +-138.472 +11 +159.592 +21 +-138.663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +159.592 +20 +-138.663 +11 +159.592 +21 +-139.139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +159.592 +20 +-139.139 +11 +159.687 +21 +-139.329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +159.687 +20 +-139.329 +11 +159.782 +21 +-139.425 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +159.782 +20 +-139.425 +11 +159.972 +21 +-139.52 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +159.972 +20 +-139.52 +11 +160.353 +21 +-139.52 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +160.353 +20 +-139.52 +11 +160.544 +21 +-139.425 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +160.544 +20 +-139.425 +11 +160.639 +21 +-139.329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +160.639 +20 +-139.329 +11 +160.734 +21 +-139.139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +162.449 +20 +-138.948 +11 +162.449 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +161.972 +20 +-138.186 +11 +161.496 +21 +-139.615 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +161.496 +20 +-139.615 +11 +162.734 +21 +-139.615 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +163.401 +20 +-138.282 +11 +163.401 +21 +-138.663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +164.163 +20 +-138.282 +11 +164.163 +21 +-138.663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +166.792 +20 +-141.044 +11 +166.696 +21 +-140.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +166.696 +20 +-140.948 +11 +166.506 +21 +-140.663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +166.506 +20 +-140.663 +11 +166.411 +21 +-140.472 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +166.411 +20 +-140.472 +11 +166.315 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +166.315 +20 +-140.186 +11 +166.22 +21 +-139.71 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +166.22 +20 +-139.71 +11 +166.22 +21 +-139.329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +166.22 +20 +-139.329 +11 +166.315 +21 +-138.853 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +166.315 +20 +-138.853 +11 +166.411 +21 +-138.567 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +166.411 +20 +-138.567 +11 +166.506 +21 +-138.377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +166.506 +20 +-138.377 +11 +166.696 +21 +-138.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +166.696 +20 +-138.091 +11 +166.792 +21 +-137.996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +168.601 +20 +-140.282 +11 +167.458 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +168.03 +20 +-140.282 +11 +168.03 +21 +-138.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +168.03 +20 +-138.282 +11 +167.839 +21 +-138.567 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +167.839 +20 +-138.567 +11 +167.649 +21 +-138.758 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +167.649 +20 +-138.758 +11 +167.458 +21 +-138.853 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +169.363 +20 +-138.472 +11 +169.458 +21 +-138.377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +169.458 +20 +-138.377 +11 +169.649 +21 +-138.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +169.649 +20 +-138.282 +11 +170.125 +21 +-138.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +170.125 +20 +-138.282 +11 +170.315 +21 +-138.377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +170.315 +20 +-138.377 +11 +170.411 +21 +-138.472 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +170.411 +20 +-138.472 +11 +170.506 +21 +-138.663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +170.506 +20 +-138.663 +11 +170.506 +21 +-138.853 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +170.506 +20 +-138.853 +11 +170.411 +21 +-139.139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +170.411 +20 +-139.139 +11 +169.268 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +169.268 +20 +-140.282 +11 +170.506 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +172.563 +20 +-140.282 +11 +172.563 +21 +-138.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +173.42 +20 +-140.282 +11 +173.42 +21 +-139.234 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +173.42 +20 +-139.234 +11 +173.325 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +173.325 +20 +-139.044 +11 +173.134 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +173.134 +20 +-138.948 +11 +172.849 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +172.849 +20 +-138.948 +11 +172.658 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +172.658 +20 +-139.044 +11 +172.563 +21 +-139.139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +174.658 +20 +-140.282 +11 +174.468 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +174.468 +20 +-140.186 +11 +174.372 +21 +-140.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +174.372 +20 +-140.091 +11 +174.277 +21 +-139.901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +174.277 +20 +-139.901 +11 +174.277 +21 +-139.329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +174.277 +20 +-139.329 +11 +174.372 +21 +-139.139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +174.372 +20 +-139.139 +11 +174.468 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +174.468 +20 +-139.044 +11 +174.658 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +174.658 +20 +-138.948 +11 +174.944 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +174.944 +20 +-138.948 +11 +175.134 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +175.134 +20 +-139.044 +11 +175.23 +21 +-139.139 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +175.23 +20 +-139.139 +11 +175.325 +21 +-139.329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +175.325 +20 +-139.329 +11 +175.325 +21 +-139.901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +175.325 +20 +-139.901 +11 +175.23 +21 +-140.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +175.23 +20 +-140.091 +11 +175.134 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +175.134 +20 +-140.186 +11 +174.944 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +174.944 +20 +-140.282 +11 +174.658 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +176.468 +20 +-140.282 +11 +176.277 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +176.277 +20 +-140.186 +11 +176.182 +21 +-139.996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +176.182 +20 +-139.996 +11 +176.182 +21 +-138.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +177.992 +20 +-140.186 +11 +177.801 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +177.801 +20 +-140.282 +11 +177.42 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +177.42 +20 +-140.282 +11 +177.23 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +177.23 +20 +-140.186 +11 +177.134 +21 +-139.996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +177.134 +20 +-139.996 +11 +177.134 +21 +-139.234 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +177.134 +20 +-139.234 +11 +177.23 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +177.23 +20 +-139.044 +11 +177.42 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +177.42 +20 +-138.948 +11 +177.801 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +177.801 +20 +-138.948 +11 +177.992 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +177.992 +20 +-139.044 +11 +178.087 +21 +-139.234 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +178.087 +20 +-139.234 +11 +178.087 +21 +-139.425 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +178.087 +20 +-139.425 +11 +177.134 +21 +-139.615 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +178.849 +20 +-140.186 +11 +179.039 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +179.039 +20 +-140.282 +11 +179.42 +21 +-140.282 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +179.42 +20 +-140.282 +11 +179.611 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +179.611 +20 +-140.186 +11 +179.706 +21 +-139.996 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +179.706 +20 +-139.996 +11 +179.706 +21 +-139.901 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +179.706 +20 +-139.901 +11 +179.611 +21 +-139.71 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +179.611 +20 +-139.71 +11 +179.42 +21 +-139.615 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +179.42 +20 +-139.615 +11 +179.134 +21 +-139.615 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +179.134 +20 +-139.615 +11 +178.944 +21 +-139.52 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +178.944 +20 +-139.52 +11 +178.849 +21 +-139.329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +178.849 +20 +-139.329 +11 +178.849 +21 +-139.234 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +178.849 +20 +-139.234 +11 +178.944 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +178.944 +20 +-139.044 +11 +179.134 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +179.134 +20 +-138.948 +11 +179.42 +21 +-138.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +179.42 +20 +-138.948 +11 +179.611 +21 +-139.044 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +180.372 +20 +-141.044 +11 +180.468 +21 +-140.948 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +180.468 +20 +-140.948 +11 +180.658 +21 +-140.663 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +180.658 +20 +-140.663 +11 +180.753 +21 +-140.472 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +180.753 +20 +-140.472 +11 +180.849 +21 +-140.186 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +180.849 +20 +-140.186 +11 +180.944 +21 +-139.71 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +180.944 +20 +-139.71 +11 +180.944 +21 +-139.329 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +180.944 +20 +-139.329 +11 +180.849 +21 +-138.853 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +180.849 +20 +-138.853 +11 +180.753 +21 +-138.567 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +180.753 +20 +-138.567 +11 +180.658 +21 +-138.377 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +180.658 +20 +-138.377 +11 +180.468 +21 +-138.091 +0 +LINE +8 +BLACK +6 +CONTINUOUS +10 +180.468 +20 +-138.091 +11 +180.372 +21 +-137.996 + 0 +ENDSEC + 0 +EOF diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/DXF/StudioMic-PTH.drl b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/DXF/StudioMic-PTH.drl new file mode 100755 index 0000000..9afbd63 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/DXF/StudioMic-PTH.drl @@ -0,0 +1,28 @@ +M48 +; DRILL file {KiCad (7.0.0)} date Sat Mar 18 07:42:43 2023 +; FORMAT={-:-/ absolute / metric / decimal} +; #@! TF.CreationDate,2023-03-18T07:42:43+03:00 +; #@! TF.GenerationSoftware,Kicad,Pcbnew,(7.0.0) +; #@! TF.FileFunction,Plated,1,2,PTH +FMAT,2 +METRIC +; #@! TA.AperFunction,Plated,PTH,ViaDrill +T1C1.000 +% +G90 +G05 +T1 +X143.764Y-108.331 +X145.034Y-59.563 +X147.955Y-78.232 +X150.391Y-71.755 +X151.638Y-106.934 +X153.416Y-59.817 +X153.67Y-77.724 +X154.822Y-67.828 +X158.242Y-56.388 +X162.687Y-58.039 +X163.322Y-104.013 +X163.322Y-109.093 +T0 +M30 diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Gerbers/StudioMic-B_Cu.gbr b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Gerbers/StudioMic-B_Cu.gbr new file mode 100755 index 0000000..d655061 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Gerbers/StudioMic-B_Cu.gbr @@ -0,0 +1,88 @@ +%TF.GenerationSoftware,KiCad,Pcbnew,(7.0.0)*% +%TF.CreationDate,2023-03-18T07:41:40+03:00*% +%TF.ProjectId,StudioMic,53747564-696f-44d6-9963-2e6b69636164,1*% +%TF.SameCoordinates,Original*% +%TF.FileFunction,Copper,L2,Bot*% +%TF.FilePolarity,Positive*% +%FSLAX46Y46*% +G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)* +G04 Created by KiCad (PCBNEW (7.0.0)) date 2023-03-18 07:41:40* +%MOMM*% +%LPD*% +G01* +G04 APERTURE LIST* +%TA.AperFunction,ViaPad*% +%ADD10C,2.000000*% +%TD*% +%TA.AperFunction,Conductor*% +%ADD11C,0.400000*% +%TD*% +G04 APERTURE END LIST* +D10* +%TO.N,HT*% +X158242000Y-56388000D03* +X162687000Y-58039000D03* +%TO.N,Net-(C1-Pad2)*% +X150391500Y-71755000D03* +X151638000Y-106934000D03* +%TO.N,Net-(U1A--)*% +X143764000Y-108331000D03* +X153416000Y-59817000D03* +%TO.N,+12V*% +X154822500Y-67827500D03* +X163322000Y-109093000D03* +X153670000Y-77724000D03* +X163322000Y-104013000D03* +%TO.N,GNDREF*% +X147955000Y-78232000D03* +X145034000Y-59563000D03* +%TD*% +D11* +%TO.N,+12V*% +X153670000Y-68980000D02* +X154822500Y-67827500D01* +X153670000Y-77724000D02* +X153670000Y-68980000D01* +%TO.N,Net-(U1A--)*% +X140081000Y-104648000D02* +X143764000Y-108331000D01* +X140081000Y-58293000D02* +X140081000Y-104648000D01* +X150495000Y-56896000D02* +X141478000Y-56896000D01* +X153416000Y-59817000D02* +X150495000Y-56896000D01* +X141478000Y-56896000D02* +X140081000Y-58293000D01* +%TO.N,Net-(C1-Pad2)*% +X150391500Y-81811500D02* +X150391500Y-71755000D01* +X152518990Y-83938990D02* +X150391500Y-81811500D01* +X152518990Y-106053010D02* +X152518990Y-83938990D01* +X151638000Y-106934000D02* +X152518990Y-106053010D01* +%TO.N,+12V*% +X163322000Y-104013000D02* +X163322000Y-109093000D01* +%TO.N,GNDREF*% +X145542000Y-78232000D02* +X147955000Y-78232000D01* +X142240000Y-74930000D02* +X145542000Y-78232000D01* +X143764000Y-59563000D02* +X142240000Y-61087000D01* +X145034000Y-59563000D02* +X143764000Y-59563000D01* +X142240000Y-61087000D02* +X142240000Y-74930000D01* +%TO.N,HT*% +X162687000Y-57721500D02* +X162687000Y-58039000D01* +X161353500Y-56388000D02* +X162687000Y-57721500D01* +X158242000Y-56388000D02* +X161353500Y-56388000D01* +%TD*% +M02* diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Gerbers/StudioMic-B_Mask.gbr b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Gerbers/StudioMic-B_Mask.gbr new file mode 100755 index 0000000..a8d2195 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Gerbers/StudioMic-B_Mask.gbr @@ -0,0 +1,23 @@ +%TF.GenerationSoftware,KiCad,Pcbnew,(7.0.0)*% +%TF.CreationDate,2023-03-18T07:41:40+03:00*% +%TF.ProjectId,StudioMic,53747564-696f-44d6-9963-2e6b69636164,1*% +%TF.SameCoordinates,Original*% +%TF.FileFunction,Soldermask,Bot*% +%TF.FilePolarity,Negative*% +%FSLAX46Y46*% +G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)* +G04 Created by KiCad (PCBNEW (7.0.0)) date 2023-03-18 07:41:40* +%MOMM*% +%LPD*% +G01* +G04 APERTURE LIST* +%ADD10O,3.500000X2.700000*% +G04 APERTURE END LIST* +D10* +%TO.C,H1*% +X138143614Y-51396883D03* +%TD*% +%TO.C,H2*% +X167143614Y-51396883D03* +%TD*% +M02* diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Gerbers/StudioMic-B_Paste.gbr b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Gerbers/StudioMic-B_Paste.gbr new file mode 100755 index 0000000..0494d4e --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Gerbers/StudioMic-B_Paste.gbr @@ -0,0 +1,15 @@ +%TF.GenerationSoftware,KiCad,Pcbnew,(7.0.0)*% +%TF.CreationDate,2023-03-18T07:41:40+03:00*% +%TF.ProjectId,StudioMic,53747564-696f-44d6-9963-2e6b69636164,1*% +%TF.SameCoordinates,Original*% +%TF.FileFunction,Paste,Bot*% +%TF.FilePolarity,Positive*% +%FSLAX46Y46*% +G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)* +G04 Created by KiCad (PCBNEW (7.0.0)) date 2023-03-18 07:41:40* +%MOMM*% +%LPD*% +G01* +G04 APERTURE LIST* +G04 APERTURE END LIST* +M02* diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Gerbers/StudioMic-B_Silkscreen.gbr b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Gerbers/StudioMic-B_Silkscreen.gbr new file mode 100755 index 0000000..1163957 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Gerbers/StudioMic-B_Silkscreen.gbr @@ -0,0 +1,15 @@ +%TF.GenerationSoftware,KiCad,Pcbnew,(7.0.0)*% +%TF.CreationDate,2023-03-18T07:41:40+03:00*% +%TF.ProjectId,StudioMic,53747564-696f-44d6-9963-2e6b69636164,1*% +%TF.SameCoordinates,Original*% +%TF.FileFunction,Legend,Bot*% +%TF.FilePolarity,Positive*% +%FSLAX46Y46*% +G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)* +G04 Created by KiCad (PCBNEW (7.0.0)) date 2023-03-18 07:41:40* +%MOMM*% +%LPD*% +G01* +G04 APERTURE LIST* +G04 APERTURE END LIST* +M02* diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Gerbers/StudioMic-Edge_Cuts.gbr b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Gerbers/StudioMic-Edge_Cuts.gbr new file mode 100755 index 0000000..33ffbc6 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Gerbers/StudioMic-Edge_Cuts.gbr @@ -0,0 +1,50 @@ +%TF.GenerationSoftware,KiCad,Pcbnew,(7.0.0)*% +%TF.CreationDate,2023-03-18T07:41:40+03:00*% +%TF.ProjectId,StudioMic,53747564-696f-44d6-9963-2e6b69636164,1*% +%TF.SameCoordinates,Original*% +%TF.FileFunction,Profile,NP*% +%FSLAX46Y46*% +G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)* +G04 Created by KiCad (PCBNEW (7.0.0)) date 2023-03-18 07:41:40* +%MOMM*% +%LPD*% +G01* +G04 APERTURE LIST* +%TA.AperFunction,Profile*% +%ADD10C,0.100000*% +%TD*% +G04 APERTURE END LIST* +D10* +X169643615Y-130140653D02* +X169735615Y-130140653D01* +X138620616Y-133095115D02* +G75* +G03* +X135664384Y-130138884I-2956216J15D01* +G01* +X135664384Y-130138884D02* +X135572384Y-130138884D01* +X173092835Y-49373211D02* +G75* +G03* +X171816501Y-48096877I-1276334J0D01* +G01* +X133470225Y-48096877D02* +G75* +G03* +X132193891Y-49373211I0J-1276334D01* +G01* +X132193891Y-49373211D02* +X135572384Y-130138884D01* +X133470225Y-48096877D02* +X171816501Y-48096877D01* +X173092835Y-49373211D02* +X169735615Y-130140653D01* +X169643615Y-130140684D02* +G75* +G03* +X166687384Y-133096884I-15J-2956216D01* +G01* +X138620615Y-133095115D02* +X166687384Y-133096884D01* +M02* diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Gerbers/StudioMic-F_Cu.gbr b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Gerbers/StudioMic-F_Cu.gbr new file mode 100755 index 0000000..f074c20 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Gerbers/StudioMic-F_Cu.gbr @@ -0,0 +1,1209 @@ +%TF.GenerationSoftware,KiCad,Pcbnew,(7.0.0)*% +%TF.CreationDate,2023-03-18T07:41:40+03:00*% +%TF.ProjectId,StudioMic,53747564-696f-44d6-9963-2e6b69636164,1*% +%TF.SameCoordinates,Original*% +%TF.FileFunction,Copper,L1,Top*% +%TF.FilePolarity,Positive*% +%FSLAX46Y46*% +G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)* +G04 Created by KiCad (PCBNEW (7.0.0)) date 2023-03-18 07:41:40* +%MOMM*% +%LPD*% +G01* +G04 APERTURE LIST* +G04 Aperture macros list* +%AMRoundRect* +0 Rectangle with rounded corners* +0 $1 Rounding radius* +0 $2 $3 $4 $5 $6 $7 $8 $9 X,Y pos of 4 corners* +0 Add a 4 corners polygon primitive as box body* +4,1,4,$2,$3,$4,$5,$6,$7,$8,$9,$2,$3,0* +0 Add four circle primitives for the rounded corners* +1,1,$1+$1,$2,$3* +1,1,$1+$1,$4,$5* +1,1,$1+$1,$6,$7* +1,1,$1+$1,$8,$9* +0 Add four rect primitives between the rounded corners* +20,1,$1+$1,$2,$3,$4,$5,0* +20,1,$1+$1,$4,$5,$6,$7,0* +20,1,$1+$1,$6,$7,$8,$9,0* +20,1,$1+$1,$8,$9,$2,$3,0*% +G04 Aperture macros list end* +%TA.AperFunction,SMDPad,CuDef*% +%ADD10RoundRect,0.250000X-0.475000X0.250000X-0.475000X-0.250000X0.475000X-0.250000X0.475000X0.250000X0*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD11RoundRect,0.250000X0.475000X-0.250000X0.475000X0.250000X-0.475000X0.250000X-0.475000X-0.250000X0*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD12RoundRect,0.150000X0.150000X-0.825000X0.150000X0.825000X-0.150000X0.825000X-0.150000X-0.825000X0*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD13RoundRect,0.250000X-0.600000X1.400000X-0.600000X-1.400000X0.600000X-1.400000X0.600000X1.400000X0*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD14RoundRect,0.250000X0.450000X-0.262500X0.450000X0.262500X-0.450000X0.262500X-0.450000X-0.262500X0*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD15RoundRect,0.250000X0.262500X0.450000X-0.262500X0.450000X-0.262500X-0.450000X0.262500X-0.450000X0*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD16RoundRect,0.250000X-0.250000X0.250000X-0.250000X-0.250000X0.250000X-0.250000X0.250000X0.250000X0*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD17RoundRect,0.250000X1.950000X1.000000X-1.950000X1.000000X-1.950000X-1.000000X1.950000X-1.000000X0*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD18RoundRect,0.250000X-0.450000X0.262500X-0.450000X-0.262500X0.450000X-0.262500X0.450000X0.262500X0*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD19RoundRect,0.250000X-0.262500X-0.450000X0.262500X-0.450000X0.262500X0.450000X-0.262500X0.450000X0*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD20RoundRect,0.250000X-0.250000X-0.475000X0.250000X-0.475000X0.250000X0.475000X-0.250000X0.475000X0*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD21RoundRect,0.250000X0.250000X0.475000X-0.250000X0.475000X-0.250000X-0.475000X0.250000X-0.475000X0*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD22RoundRect,0.250000X0.250000X0.250000X-0.250000X0.250000X-0.250000X-0.250000X0.250000X-0.250000X0*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD23RoundRect,0.250000X1.000000X-1.950000X1.000000X1.950000X-1.000000X1.950000X-1.000000X-1.950000X0*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD24RoundRect,0.500000X-0.500000X-0.500000X0.500000X-0.500000X0.500000X0.500000X-0.500000X0.500000X0*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD25RoundRect,0.250000X-1.950000X-1.000000X1.950000X-1.000000X1.950000X1.000000X-1.950000X1.000000X0*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD26RoundRect,0.250000X-0.250000X-0.250000X0.250000X-0.250000X0.250000X0.250000X-0.250000X0.250000X0*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD27RoundRect,0.250000X-1.000000X1.950000X-1.000000X-1.950000X1.000000X-1.950000X1.000000X1.950000X0*% +%TD*% +%TA.AperFunction,SMDPad,CuDef*% +%ADD28RoundRect,0.150000X-0.150000X0.825000X-0.150000X-0.825000X0.150000X-0.825000X0.150000X0.825000X0*% +%TD*% +%TA.AperFunction,ViaPad*% +%ADD29C,2.000000*% +%TD*% +%TA.AperFunction,Conductor*% +%ADD30C,0.400000*% +%TD*% +G04 APERTURE END LIST* +D10* +%TO.P,C12,2*% +%TO.N,Net-(D3-K)*% +X162282500Y-79353400D03* +%TO.P,C12,1*% +%TO.N,Net-(C12-Pad1)*% +X162282500Y-77453400D03* +%TD*% +%TO.P,C8,2*% +%TO.N,GNDA*% +X145087000Y-63688000D03* +%TO.P,C8,1*% +%TO.N,GNDREF*% +X145087000Y-61788000D03* +%TD*% +D11* +%TO.P,C16,2*% +%TO.N,Net-(D7-K)*% +X159385000Y-65871000D03* +%TO.P,C16,1*% +%TO.N,Net-(C16-Pad1)*% +X159385000Y-67771000D03* +%TD*% +D12* +%TO.P,U2,14,VCC*% +%TO.N,+12V*% +X157126300Y-69944200D03* +%TO.P,U2,13*% +%TO.N,Net-(C15-Pad1)*% +X158396300Y-69944200D03* +%TO.P,U2,12*% +%TO.N,Net-(C16-Pad1)*% +X159666300Y-69944200D03* +%TO.P,U2,11*% +%TO.N,Net-(C14-Pad1)*% +X160936300Y-69944200D03* +%TO.P,U2,10*% +%TO.N,Net-(C15-Pad1)*% +X162206300Y-69944200D03* +%TO.P,U2,9*% +%TO.N,Net-(C13-Pad1)*% +X163476300Y-69944200D03* +%TO.P,U2,8*% +%TO.N,Net-(C14-Pad1)*% +X164746300Y-69944200D03* +%TO.P,U2,7,GND*% +%TO.N,GNDREF*% +X164746300Y-74894200D03* +%TO.P,U2,6*% +%TO.N,Net-(C13-Pad1)*% +X163476300Y-74894200D03* +%TO.P,U2,5*% +%TO.N,Net-(C12-Pad1)*% +X162206300Y-74894200D03* +%TO.P,U2,4*% +X160936300Y-74894200D03* +%TO.P,U2,3*% +%TO.N,Net-(C11-Pad1)*% +X159666300Y-74894200D03* +%TO.P,U2,2*% +X158396300Y-74894200D03* +%TO.P,U2,1*% +%TO.N,Net-(C9-Pad2)*% +X157126300Y-74894200D03* +%TD*% +D13* +%TO.P,D1,2,A*% +%TO.N,GNDREF*% +X161671000Y-92666000D03* +%TO.P,D1,1,K*% +%TO.N,+12V*% +X161671000Y-87166000D03* +%TD*% +D14* +%TO.P,R12,2*% +%TO.N,Net-(U1A--)*% +X153138500Y-62333500D03* +%TO.P,R12,1*% +%TO.N,Net-(U1B--)*% +X153138500Y-64158500D03* +%TD*% +D15* +%TO.P,R5,2*% +%TO.N,+6V*% +X151821500Y-80156000D03* +%TO.P,R5,1*% +%TO.N,+12V*% +X153646500Y-80156000D03* +%TD*% +%TO.P,R10,2*% +%TO.N,Net-(C17-Pad2)*% +X161522400Y-60598000D03* +%TO.P,R10,1*% +%TO.N,HT*% +X163347400Y-60598000D03* +%TD*% +D16* +%TO.P,D8,2,A*% +%TO.N,Net-(D7-K)*% +X157353000Y-65896800D03* +%TO.P,D8,1,K*% +%TO.N,Net-(D8-K)*% +X157353000Y-63396800D03* +%TD*% +D17* +%TO.P,C3,2*% +%TO.N,GNDREF*% +X155771500Y-101600000D03* +%TO.P,C3,1*% +%TO.N,+12V*% +X163171500Y-101600000D03* +%TD*% +D18* +%TO.P,R2,2*% +%TO.N,Net-(C92-Pad2)*% +X152630500Y-121285000D03* +%TO.P,R2,1*% +%TO.N,Net-(C2-Pad1)*% +X152630500Y-119460000D03* +%TD*% +D19* +%TO.P,R6,2*% +%TO.N,+6V*% +X151384000Y-76346000D03* +%TO.P,R6,1*% +%TO.N,GNDA*% +X149559000Y-76346000D03* +%TD*% +D20* +%TO.P,C15,2*% +%TO.N,Net-(D6-K)*% +X164399000Y-67456000D03* +%TO.P,C15,1*% +%TO.N,Net-(C15-Pad1)*% +X162499000Y-67456000D03* +%TD*% +D10* +%TO.P,C11,2*% +%TO.N,Net-(D2-K)*% +X160250500Y-79353400D03* +%TO.P,C11,1*% +%TO.N,Net-(C11-Pad1)*% +X160250500Y-77453400D03* +%TD*% +D21* +%TO.P,C17,2*% +%TO.N,Net-(C17-Pad2)*% +X161510300Y-62630000D03* +%TO.P,C17,1*% +%TO.N,GNDREF*% +X163410300Y-62630000D03* +%TD*% +D22* +%TO.P,D3,2,A*% +%TO.N,Net-(D2-K)*% +X161819900Y-81146600D03* +%TO.P,D3,1,K*% +%TO.N,Net-(D3-K)*% +X164319900Y-81146600D03* +%TD*% +D18* +%TO.P,R9,2*% +%TO.N,Net-(D8-K)*% +X159666300Y-63908300D03* +%TO.P,R9,1*% +%TO.N,Net-(C17-Pad2)*% +X159666300Y-62083300D03* +%TD*% +D19* +%TO.P,R3,2*% +%TO.N,+12V*% +X163322000Y-118110000D03* +%TO.P,R3,1*% +%TO.N,Net-(C1-Pad1)*% +X161497000Y-118110000D03* +%TD*% +%TO.P,R11,2*% +%TO.N,Net-(C1-Pad2)*% +X150391500Y-69361000D03* +%TO.P,R11,1*% +%TO.N,Net-(U1B--)*% +X148566500Y-69361000D03* +%TD*% +D18* +%TO.P,R101,2*% +%TO.N,Net-(R101-Pad2)*% +X136144000Y-58189500D03* +%TO.P,R101,1*% +%TO.N,Net-(U1A-+)*% +X136144000Y-56364500D03* +%TD*% +%TO.P,R102,2*% +%TO.N,Net-(R102-Pad2)*% +X136144000Y-61642000D03* +%TO.P,R102,1*% +%TO.N,Net-(R101-Pad2)*% +X136144000Y-59817000D03* +%TD*% +%TO.P,R105,2*% +%TO.N,Net-(R105-Pad2)*% +X136144000Y-71905500D03* +%TO.P,R105,1*% +%TO.N,Net-(R104-Pad2)*% +X136144000Y-70080500D03* +%TD*% +D19* +%TO.P,R7,2*% +%TO.N,GNDA*% +X149582500Y-74314000D03* +%TO.P,R7,1*% +%TO.N,GNDREF*% +X147757500Y-74314000D03* +%TD*% +D11* +%TO.P,C10,2*% +%TO.N,+12V*% +X155348300Y-69919800D03* +%TO.P,C10,1*% +%TO.N,GNDREF*% +X155348300Y-71819800D03* +%TD*% +D19* +%TO.P,R4,2*% +%TO.N,+12V*% +X163322000Y-120396000D03* +%TO.P,R4,1*% +%TO.N,Net-(C2-Pad1)*% +X161497000Y-120396000D03* +%TD*% +D23* +%TO.P,C1,2*% +%TO.N,Net-(C1-Pad2)*% +X157099000Y-108568000D03* +%TO.P,C1,1*% +%TO.N,Net-(C1-Pad1)*% +X157099000Y-115968000D03* +%TD*% +D24* +%TO.P,J1,3*% +%TO.N,Net-(C91-Pad1)*% +X157630500Y-123444000D03* +%TO.P,J1,2*% +%TO.N,Net-(C92-Pad2)*% +X152630500Y-123444000D03* +%TO.P,J1,1*% +%TO.N,GNDREF*% +X147630500Y-123444000D03* +%TD*% +D10* +%TO.P,C13,2*% +%TO.N,Net-(D4-K)*% +X164289100Y-79363600D03* +%TO.P,C13,1*% +%TO.N,Net-(C13-Pad1)*% +X164289100Y-77463600D03* +%TD*% +D20* +%TO.P,C19,2*% +%TO.N,Net-(MK1-+)*% +X150683000Y-58928000D03* +%TO.P,C19,1*% +%TO.N,Net-(U1A-+)*% +X148783000Y-58928000D03* +%TD*% +D25* +%TO.P,C7,2*% +%TO.N,GNDREF*% +X155465000Y-88646000D03* +%TO.P,C7,1*% +%TO.N,GNDA*% +X148065000Y-88646000D03* +%TD*% +D19* +%TO.P,R107,2*% +%TO.N,Net-(R107-Pad2)*% +X141247500Y-73660000D03* +%TO.P,R107,1*% +%TO.N,Net-(R106-Pad2)*% +X139422500Y-73660000D03* +%TD*% +D18* +%TO.P,R1,2*% +%TO.N,Net-(C91-Pad1)*% +X157964500Y-121285000D03* +%TO.P,R1,1*% +%TO.N,Net-(C1-Pad1)*% +X157964500Y-119460000D03* +%TD*% +D26* +%TO.P,D7,2,A*% +%TO.N,Net-(D6-K)*% +X164318000Y-64916000D03* +%TO.P,D7,1,K*% +%TO.N,Net-(D7-K)*% +X161818000Y-64916000D03* +%TD*% +D21* +%TO.P,C9,2*% +%TO.N,Net-(C9-Pad2)*% +X156481100Y-79048600D03* +%TO.P,C9,1*% +%TO.N,GNDREF*% +X158381100Y-79048600D03* +%TD*% +D22* +%TO.P,D2,2,A*% +%TO.N,+12V*% +X157349500Y-81934000D03* +%TO.P,D2,1,K*% +%TO.N,Net-(D2-K)*% +X159849500Y-81934000D03* +%TD*% +D15* +%TO.P,R13,1*% +%TO.N,HT*% +X155471500Y-56388000D03* +%TO.P,R13,2*% +%TO.N,Net-(MK1-+)*% +X153646500Y-56388000D03* +%TD*% +%TO.P,R8,2*% +%TO.N,Net-(C9-Pad2)*% +X156544000Y-77092800D03* +%TO.P,R8,1*% +%TO.N,Net-(C11-Pad1)*% +X158369000Y-77092800D03* +%TD*% +D18* +%TO.P,R103,2*% +%TO.N,Net-(R103-Pad2)*% +X136144000Y-65047500D03* +%TO.P,R103,1*% +%TO.N,Net-(R102-Pad2)*% +X136144000Y-63222500D03* +%TD*% +D16* +%TO.P,D4,2,A*% +%TO.N,Net-(D3-K)*% +X166295700Y-81162200D03* +%TO.P,D4,1,K*% +%TO.N,Net-(D4-K)*% +X166295700Y-78662200D03* +%TD*% +D24* +%TO.P,MK1,2,+*% +%TO.N,Net-(MK1-+)*% +X151304000Y-56388000D03* +%TO.P,MK1,1,-*% +%TO.N,GNDA*% +X141304000Y-56388000D03* +%TD*% +D11* +%TO.P,C18,2*% +%TO.N,HT*% +X165608000Y-60537000D03* +%TO.P,C18,1*% +%TO.N,GNDREF*% +X165608000Y-62437000D03* +%TD*% +D18* +%TO.P,R104,2*% +%TO.N,Net-(R104-Pad2)*% +X136144000Y-68476500D03* +%TO.P,R104,1*% +%TO.N,Net-(R103-Pad2)*% +X136144000Y-66651500D03* +%TD*% +D19* +%TO.P,R108,2*% +%TO.N,Net-(R108-Pad2)*% +X144676500Y-73660000D03* +%TO.P,R108,1*% +%TO.N,Net-(R107-Pad2)*% +X142851500Y-73660000D03* +%TD*% +D16* +%TO.P,D6,2,A*% +%TO.N,Net-(D5-K)*% +X167005000Y-68325000D03* +%TO.P,D6,1,K*% +%TO.N,Net-(D6-K)*% +X167005000Y-65825000D03* +%TD*% +D14* +%TO.P,R109,2*% +%TO.N,Net-(R109-Pad2)*% +X144526000Y-70080500D03* +%TO.P,R109,1*% +%TO.N,Net-(R108-Pad2)*% +X144526000Y-71905500D03* +%TD*% +D11* +%TO.P,C4,2*% +%TO.N,+12V*% +X164084000Y-88839000D03* +%TO.P,C4,1*% +%TO.N,GNDREF*% +X164084000Y-90739000D03* +%TD*% +D19* +%TO.P,R106,2*% +%TO.N,Net-(R106-Pad2)*% +X137795000Y-73660000D03* +%TO.P,R106,1*% +%TO.N,Net-(R105-Pad2)*% +X135970000Y-73660000D03* +%TD*% +D10* +%TO.P,C14,2*% +%TO.N,Net-(D5-K)*% +X166549700Y-71896000D03* +%TO.P,C14,1*% +%TO.N,Net-(C14-Pad1)*% +X166549700Y-69996000D03* +%TD*% +D16* +%TO.P,D5,2,A*% +%TO.N,Net-(D4-K)*% +X166676700Y-76234600D03* +%TO.P,D5,1,K*% +%TO.N,Net-(D5-K)*% +X166676700Y-73734600D03* +%TD*% +D11* +%TO.P,C6,2*% +%TO.N,+6V*% +X149813000Y-79968000D03* +%TO.P,C6,1*% +%TO.N,GNDREF*% +X149813000Y-81868000D03* +%TD*% +D23* +%TO.P,C2,2*% +%TO.N,Net-(U1A--)*% +X147447000Y-110981000D03* +%TO.P,C2,1*% +%TO.N,Net-(C2-Pad1)*% +X147447000Y-118381000D03* +%TD*% +D27* +%TO.P,C5,2*% +%TO.N,GNDREF*% +X147447000Y-103903000D03* +%TO.P,C5,1*% +%TO.N,+6V*% +X147447000Y-96503000D03* +%TD*% +D14* +%TO.P,R110,2*% +%TO.N,GNDA*% +X144526000Y-66651500D03* +%TO.P,R110,1*% +%TO.N,Net-(R109-Pad2)*% +X144526000Y-68476500D03* +%TD*% +D28* +%TO.P,U1,8,V+*% +%TO.N,+6V*% +X151233500Y-67010000D03* +%TO.P,U1,7*% +%TO.N,Net-(C1-Pad2)*% +X149963500Y-67010000D03* +%TO.P,U1,6,-*% +%TO.N,Net-(U1B--)*% +X148693500Y-67010000D03* +%TO.P,U1,5,+*% +%TO.N,GNDA*% +X147423500Y-67010000D03* +%TO.P,U1,4,V-*% +%TO.N,GNDREF*% +X147423500Y-62060000D03* +%TO.P,U1,3,+*% +%TO.N,Net-(U1A-+)*% +X148693500Y-62060000D03* +%TO.P,U1,2,-*% +%TO.N,Net-(U1A--)*% +X149963500Y-62060000D03* +%TO.P,U1,1*% +X151233500Y-62060000D03* +%TD*% +D29* +%TO.N,HT*% +X158242000Y-56388000D03* +X162687000Y-58039000D03* +%TO.N,Net-(C1-Pad2)*% +X150391500Y-71755000D03* +X151638000Y-106934000D03* +%TO.N,Net-(U1A--)*% +X143764000Y-108331000D03* +X153416000Y-59817000D03* +%TO.N,+12V*% +X154822500Y-67827500D03* +X163322000Y-109093000D03* +X153670000Y-77724000D03* +X163322000Y-104013000D03* +%TO.N,GNDREF*% +X147955000Y-78232000D03* +X145034000Y-59563000D03* +%TD*% +D30* +%TO.N,+12V*% +X155348300Y-68353300D02* +X154822500Y-67827500D01* +X155348300Y-69919800D02* +X155348300Y-68353300D01* +%TO.N,Net-(U1A--)*% +X143891000Y-108331000D02* +X143764000Y-108331000D01* +X146541000Y-110981000D02* +X143891000Y-108331000D01* +X147447000Y-110981000D02* +X146541000Y-110981000D01* +%TO.N,Net-(C1-Pad2)*% +X155465000Y-106934000D02* +X151638000Y-106934000D01* +X157099000Y-108568000D02* +X155465000Y-106934000D01* +%TO.N,+12V*% +X163322000Y-118110000D02* +X163322000Y-109093000D01* +%TO.N,GNDREF*% +X166751000Y-97746000D02* +X161671000Y-92666000D01* +X166751000Y-104521000D02* +X166751000Y-97746000D01* +X157607000Y-101600000D02* +X162306000Y-106299000D01* +X157607000Y-101473000D02* +X157607000Y-101600000D01* +X162306000Y-106299000D02* +X164973000Y-106299000D01* +X164973000Y-106299000D02* +X166751000Y-104521000D01* +X147503500Y-123571000D02* +X147630500Y-123444000D01* +X144653000Y-123571000D02* +X147503500Y-123571000D01* +X143510000Y-122428000D02* +X144653000Y-123571000D01* +X143510000Y-117094000D02* +X143510000Y-122428000D01* +X154178000Y-112776000D02* +X152273000Y-114681000D01* +X152273000Y-114681000D02* +X145923000Y-114681000D01* +X158623000Y-112776000D02* +X154178000Y-112776000D01* +X159893000Y-111506000D02* +X158623000Y-112776000D01* +X145923000Y-114681000D02* +X143510000Y-117094000D01* +X159893000Y-106426000D02* +X159893000Y-111506000D01* +X158623000Y-105156000D02* +X159893000Y-106426000D01* +X157734000Y-105156000D02* +X158623000Y-105156000D01* +X157734000Y-105156000D02* +X155771500Y-103193500D01* +X155771500Y-103193500D02* +X155771500Y-101600000D01* +%TO.N,GNDA*% +X146304000Y-84201000D02* +X146304000Y-71981000D01* +X148065000Y-85962000D02* +X146304000Y-84201000D01* +X146304000Y-71981000D02* +X147423500Y-70861500D01* +X148065000Y-88646000D02* +X148065000Y-85962000D01* +%TO.N,GNDREF*% +X147955000Y-74511500D02* +X147757500Y-74314000D01* +X147955000Y-80010000D02* +X147955000Y-74511500D01* +X149813000Y-81868000D02* +X147955000Y-80010000D01* +%TO.N,HT*% +X163347400Y-58699400D02* +X162687000Y-58039000D01* +X163347400Y-60598000D02* +X163347400Y-58699400D01* +%TO.N,GNDREF*% +X167640000Y-59582000D02* +X167640000Y-62503000D01* +X155575000Y-61722000D02* +X161036000Y-56261000D01* +X155575000Y-64262000D02* +X155575000Y-61722000D01* +X153289000Y-72028000D02* +X153289000Y-66548000D01* +X154813000Y-73552000D02* +X153289000Y-72028000D01* +X161036000Y-56261000D02* +X164319000Y-56261000D01* +X164319000Y-56261000D02* +X167640000Y-59582000D01* +X155348300Y-73552000D02* +X154813000Y-73552000D01* +X153289000Y-66548000D02* +X155575000Y-64262000D01* +%TO.N,+6V*% +X151233500Y-67667500D02* +X151233500Y-67010000D01* +X152019000Y-68453000D02* +X151233500Y-67667500D01* +X152019000Y-75711000D02* +X152019000Y-68453000D01* +X151384000Y-76346000D02* +X152019000Y-75711000D01* +%TO.N,Net-(C1-Pad2)*% +X150391500Y-69361000D02* +X150391500Y-71755000D01* +%TO.N,GNDA*% +X147423500Y-71350500D02* +X147423500Y-70861500D01* +X149582500Y-73509500D02* +X147423500Y-71350500D01* +X149582500Y-74314000D02* +X149582500Y-73509500D01* +%TO.N,Net-(U1A--)*% +X153416000Y-59877500D02* +X153416000Y-59817000D01* +X151233500Y-62060000D02* +X153416000Y-59877500D01* +%TO.N,GNDREF*% +X145087000Y-59616000D02* +X145034000Y-59563000D01* +X145087000Y-61788000D02* +X145087000Y-59616000D01* +%TO.N,+12V*% +X155372700Y-69944200D02* +X155348300Y-69919800D01* +X157126300Y-69944200D02* +X155372700Y-69944200D01* +X153646500Y-77747500D02* +X153670000Y-77724000D01* +X153646500Y-80156000D02* +X153646500Y-77747500D01* +%TO.N,Net-(U1A-+)*% +X137691500Y-56364500D02* +X136144000Y-56364500D01* +X148783000Y-55946000D02* +X148783000Y-58928000D01* +X147066000Y-54229000D02* +X148783000Y-55946000D01* +X137691500Y-56364500D02* +X139827000Y-54229000D01* +X139827000Y-54229000D02* +X147066000Y-54229000D01* +%TO.N,+6V*% +X150639000Y-96503000D02* +X147447000Y-96503000D01* +X151821500Y-80156000D02* +X152146000Y-80480500D01* +X152146000Y-80480500D02* +X152146000Y-94996000D01* +X152146000Y-94996000D02* +X150639000Y-96503000D01* +%TO.N,GNDREF*% +X155465000Y-95885000D02* +X147447000Y-103903000D01* +X155465000Y-88646000D02* +X155465000Y-95885000D01* +X144018000Y-100474000D02* +X147447000Y-103903000D01* +X144018000Y-93853000D02* +X144018000Y-100474000D01* +X149987000Y-92329000D02* +X145542000Y-92329000D01* +X151257000Y-91059000D02* +X149987000Y-92329000D01* +X149813000Y-81868000D02* +X151257000Y-83312000D01* +X151257000Y-83312000D02* +X151257000Y-91059000D01* +X145542000Y-92329000D02* +X144018000Y-93853000D01* +%TO.N,Net-(R108-Pad2)*% +X144676500Y-72056000D02* +X144526000Y-71905500D01* +X144676500Y-73660000D02* +X144676500Y-72056000D01* +%TO.N,Net-(R106-Pad2)*% +X139422500Y-73660000D02* +X137795000Y-73660000D01* +%TO.N,Net-(R107-Pad2)*% +X142851500Y-73660000D02* +X141247500Y-73660000D01* +%TO.N,GNDREF*% +X166878000Y-89154000D02* +X166878000Y-83204000D01* +X165293000Y-90739000D02* +X166878000Y-89154000D01* +X164084000Y-90739000D02* +X165293000Y-90739000D01* +%TO.N,GNDA*% +X142978500Y-66651500D02* +X145161000Y-66651500D01* +X141304000Y-64977000D02* +X142978500Y-66651500D01* +X141304000Y-56388000D02* +X141304000Y-64977000D01* +X147065000Y-66651500D02* +X147423500Y-67010000D01* +X145161000Y-66651500D02* +X147065000Y-66651500D01* +%TO.N,Net-(R109-Pad2)*% +X145161000Y-68476500D02* +X145161000Y-70080500D01* +%TO.N,Net-(R105-Pad2)*% +X136144000Y-73486000D02* +X135970000Y-73660000D01* +X136144000Y-71905500D02* +X136144000Y-73486000D01* +%TO.N,Net-(R104-Pad2)*% +X136144000Y-68476500D02* +X136144000Y-70080500D01* +%TO.N,Net-(R103-Pad2)*% +X136144000Y-65047500D02* +X136144000Y-66651500D01* +%TO.N,Net-(R102-Pad2)*% +X136144000Y-61642000D02* +X136144000Y-63222500D01* +%TO.N,Net-(R101-Pad2)*% +X136144000Y-58189500D02* +X136144000Y-59817000D01* +%TO.N,Net-(MK1-+)*% +X153646500Y-56388000D02* +X151304000Y-56388000D01* +%TO.N,Net-(U1B--)*% +X152527000Y-64770000D02* +X148863000Y-64770000D01* +X153138500Y-64158500D02* +X152527000Y-64770000D01* +X148863000Y-64770000D02* +X148693500Y-64939500D01* +X148693500Y-64939500D02* +X148693500Y-67010000D01* +%TO.N,Net-(U1A--)*% +X151507000Y-62333500D02* +X151233500Y-62060000D01* +X153138500Y-62333500D02* +X151507000Y-62333500D01* +%TO.N,HT*% +X158242000Y-56388000D02* +X155471500Y-56388000D01* +%TO.N,Net-(MK1-+)*% +X151304000Y-56388000D02* +X150683000Y-57009000D01* +X150683000Y-57009000D02* +X150683000Y-58928000D01* +%TO.N,Net-(U1A-+)*% +X148693500Y-59017500D02* +X148693500Y-62060000D01* +X148783000Y-58928000D02* +X148693500Y-59017500D01* +%TO.N,Net-(C1-Pad1)*% +X160020000Y-118110000D02* +X161497000Y-118110000D01* +X157099000Y-118594500D02* +X157964500Y-119460000D01* +X157099000Y-115968000D02* +X157099000Y-118594500D01* +X157964500Y-119460000D02* +X158670000Y-119460000D01* +X158670000Y-119460000D02* +X160020000Y-118110000D01* +%TO.N,Net-(C1-Pad2)*% +X149963500Y-68933000D02* +X150391500Y-69361000D01* +X149963500Y-67010000D02* +X149963500Y-68933000D01* +%TO.N,Net-(C2-Pad1)*% +X147447000Y-118381000D02* +X148209000Y-119143000D01* +X155448000Y-124968000D02* +X155067000Y-124587000D01* +X148209000Y-119143000D02* +X152313500Y-119143000D01* +X160655000Y-124968000D02* +X155448000Y-124968000D01* +X155067000Y-121285000D02* +X153242000Y-119460000D01* +X153242000Y-119460000D02* +X152630500Y-119460000D01* +X155067000Y-124587000D02* +X155067000Y-121285000D01* +X161497000Y-120396000D02* +X161497000Y-124126000D01* +X161497000Y-124126000D02* +X160655000Y-124968000D01* +X152313500Y-119143000D02* +X152630500Y-119460000D01* +%TO.N,Net-(U1A--)*% +X149963500Y-62060000D02* +X151233500Y-62060000D01* +%TO.N,+12V*% +X163303630Y-88839000D02* +X164084000Y-88839000D01* +X163171500Y-101600000D02* +X163171500Y-100179500D01* +X163322000Y-118110000D02* +X163322000Y-120396000D01* +X162226630Y-89916000D02* +X163303630Y-88839000D01* +X164084000Y-88773000D02* +X164084000Y-88839000D01* +X157349500Y-81934000D02* +X155424500Y-81934000D01* +X157349500Y-84343500D02* +X160001000Y-86995000D01* +X160001000Y-86995000D02* +X161500000Y-86995000D01* +X159385000Y-96393000D02* +X159385000Y-90297000D01* +X162477000Y-87166000D02* +X164084000Y-88773000D01* +X159385000Y-90297000D02* +X159766000Y-89916000D01* +X163322000Y-104013000D02* +X163322000Y-101750500D01* +X163171500Y-100179500D02* +X159385000Y-96393000D01* +X157349500Y-81934000D02* +X157349500Y-84343500D01* +X161671000Y-87166000D02* +X162477000Y-87166000D01* +X159766000Y-89916000D02* +X162226630Y-89916000D01* +X161500000Y-86995000D02* +X161671000Y-87166000D01* +X163322000Y-101750500D02* +X163171500Y-101600000D01* +X155424500Y-81934000D02* +X153646500Y-80156000D01* +%TO.N,+6V*% +X150001000Y-80156000D02* +X149813000Y-79968000D01* +X151821500Y-76783500D02* +X151384000Y-76346000D01* +X151821500Y-80156000D02* +X151821500Y-76783500D01* +X151821500Y-80156000D02* +X150001000Y-80156000D01* +%TO.N,GNDA*% +X145087000Y-63688000D02* +X145087000Y-66577500D01* +X149559000Y-74337500D02* +X149582500Y-74314000D01* +X145087000Y-66577500D02* +X145161000Y-66651500D01* +X149559000Y-76346000D02* +X149559000Y-74337500D01* +X147423500Y-70861500D02* +X147423500Y-67010000D01* +%TO.N,Net-(C9-Pad2)*% +X156544000Y-77092800D02* +X156544000Y-78985700D01* +X156508672Y-77057472D02* +X156544000Y-77092800D01* +X156544000Y-78985700D02* +X156481100Y-79048600D01* +X156508672Y-75511828D02* +X156508672Y-77057472D01* +X157126300Y-74894200D02* +X156508672Y-75511828D01* +%TO.N,Net-(C11-Pad1)*% +X158396300Y-77065500D02* +X158369000Y-77092800D01* +X158729600Y-77453400D02* +X158369000Y-77092800D01* +X158396300Y-74894200D02* +X158396300Y-77065500D01* +X159666300Y-74894200D02* +X158396300Y-74894200D01* +X160250500Y-77453400D02* +X158729600Y-77453400D01* +%TO.N,Net-(D2-K)*% +X160250500Y-81533000D02* +X159849500Y-81934000D01* +X161819900Y-81146600D02* +X160636900Y-81146600D01* +X160250500Y-79353400D02* +X160250500Y-81533000D01* +X160636900Y-81146600D02* +X159849500Y-81934000D01* +%TO.N,Net-(C12-Pad1)*% +X162282500Y-77453400D02* +X162282500Y-74970400D01* +X162282500Y-74970400D02* +X162206300Y-74894200D01* +X162206300Y-74894200D02* +X160936300Y-74894200D01* +%TO.N,Net-(D3-K)*% +X162282500Y-79353400D02* +X164075700Y-81146600D01* +X164335500Y-81162200D02* +X164319900Y-81146600D01* +X164075700Y-81146600D02* +X164319900Y-81146600D01* +X166295700Y-81162200D02* +X164335500Y-81162200D01* +%TO.N,Net-(C13-Pad1)*% +X163476300Y-69944200D02* +X163476300Y-74894200D01* +X163476300Y-76650800D02* +X163476300Y-74894200D01* +X164289100Y-77463600D02* +X163476300Y-76650800D01* +%TO.N,Net-(D4-K)*% +X166295700Y-76615600D02* +X166676700Y-76234600D01* +X164289100Y-79363600D02* +X165594300Y-79363600D01* +X166295700Y-78662200D02* +X166295700Y-76615600D01* +X165594300Y-79363600D02* +X166295700Y-78662200D01* +%TO.N,Net-(C14-Pad1)*% +X166497900Y-69944200D02* +X166549700Y-69996000D01* +X160936300Y-69944200D02* +X160936300Y-66793700D01* +X167513000Y-63900000D02* +X168275000Y-64662000D01* +X160936300Y-66793700D02* +X161814000Y-65916000D01* +X163773340Y-63900000D02* +X167513000Y-63900000D01* +X165608000Y-69944200D02* +X164746300Y-69944200D01* +X163068000Y-64605340D02* +X163773340Y-63900000D01* +X165735000Y-69817200D02* +X165608000Y-69944200D01* +X162830000Y-65916000D02* +X163068000Y-65678000D01* +X165989000Y-67075000D02* +X165735000Y-67329000D01* +X161814000Y-65916000D02* +X162830000Y-65916000D01* +X165735000Y-67329000D02* +X165735000Y-69817200D01* +X163068000Y-65678000D02* +X163068000Y-64605340D01* +X167894000Y-67075000D02* +X165989000Y-67075000D01* +X164746300Y-69944200D02* +X166497900Y-69944200D01* +X168275000Y-64662000D02* +X168275000Y-66694000D01* +X168275000Y-66694000D02* +X167894000Y-67075000D01* +%TO.N,Net-(D5-K)*% +X168402000Y-69107000D02* +X167620000Y-68325000D01* +X167391000Y-71896000D02* +X168402000Y-70885000D01* +X166676700Y-72023000D02* +X166549700Y-71896000D01* +X166549700Y-71896000D02* +X167391000Y-71896000D01* +X166676700Y-73734600D02* +X166676700Y-72023000D01* +X168402000Y-70885000D02* +X168402000Y-69107000D01* +X167620000Y-68325000D02* +X167005000Y-68325000D01* +%TO.N,Net-(C15-Pad1)*% +X161925000Y-72282000D02* +X162179000Y-72028000D01* +X162179000Y-72028000D02* +X162179000Y-69971500D01* +X162179000Y-69971500D02* +X162206300Y-69944200D01* +X162206300Y-67748700D02* +X162499000Y-67456000D01* +X158396300Y-72055300D02* +X158623000Y-72282000D01* +X158396300Y-69944200D02* +X158396300Y-72055300D01* +X162206300Y-69944200D02* +X162206300Y-67748700D01* +X158623000Y-72282000D02* +X161925000Y-72282000D01* +%TO.N,Net-(D6-K)*% +X164592000Y-65190000D02* +X164318000Y-64916000D01* +X167005000Y-65825000D02* +X165227000Y-65825000D01* +X165227000Y-65825000D02* +X164318000Y-64916000D01* +X164399000Y-67456000D02* +X164592000Y-67263000D01* +X164592000Y-67263000D02* +X164592000Y-65190000D01* +%TO.N,Net-(C16-Pad1)*% +X159666300Y-68052300D02* +X159666300Y-69944200D01* +X159385000Y-67771000D02* +X159666300Y-68052300D01* +%TO.N,Net-(D7-K)*% +X160927963Y-64916000D02* +X161818000Y-64916000D01* +X159359200Y-65896800D02* +X159385000Y-65871000D01* +X159972963Y-65871000D02* +X160927963Y-64916000D01* +X159385000Y-65871000D02* +X159972963Y-65871000D01* +X157353000Y-65896800D02* +X159359200Y-65896800D01* +%TO.N,Net-(C17-Pad2)*% +X161522400Y-60598000D02* +X161522400Y-62617900D01* +X161522400Y-62617900D02* +X161510300Y-62630000D01* +X161151600Y-60598000D02* +X161522400Y-60598000D01* +X159666300Y-62083300D02* +X161151600Y-60598000D01* +%TO.N,HT*% +X165547000Y-60598000D02* +X163347400Y-60598000D01* +X165608000Y-60537000D02* +X165547000Y-60598000D01* +%TO.N,Net-(D8-K)*% +X157864500Y-63908300D02* +X157353000Y-63396800D01* +X159666300Y-63908300D02* +X157864500Y-63908300D01* +%TO.N,Net-(C92-Pad2)*% +X152630500Y-123444000D02* +X152630500Y-121285000D01* +%TO.N,Net-(C91-Pad1)*% +X157964500Y-123110000D02* +X157630500Y-123444000D01* +X157964500Y-121285000D02* +X157964500Y-123110000D01* +%TO.N,Net-(U1B--)*% +X148693500Y-67010000D02* +X148693500Y-69234000D01* +X148693500Y-69234000D02* +X148566500Y-69361000D01* +%TO.N,GNDREF*% +X168148000Y-74949000D02* +X168148000Y-81934000D01* +X145518500Y-62061000D02* +X147422500Y-62061000D01* +X164818500Y-74822000D02* +X164746300Y-74894200D01* +X155956000Y-80537000D02* +X155194000Y-79775000D01* +X164084000Y-90739000D02* +X164023000Y-90739000D01* +X158381100Y-79048600D02* +X158381100Y-80016900D01* +X168529000Y-74822000D02* +X168021000Y-74822000D01* +X168021000Y-74822000D02* +X164818500Y-74822000D01* +X158381100Y-80016900D02* +X157861000Y-80537000D01* +X169291000Y-64154000D02* +X169291000Y-74060000D01* +X165928000Y-62757000D02* +X165608000Y-62437000D01* +X152400000Y-105156000D02* +X157734000Y-105156000D01* +X158877000Y-83204000D02* +X158623000Y-82950000D01* +X163603300Y-62437000D02* +X163410300Y-62630000D01* +X165608000Y-62437000D02* +X163603300Y-62437000D01* +X164023000Y-90739000D02* +X162096000Y-92666000D01* +X151147000Y-103903000D02* +X152400000Y-105156000D01* +X155348300Y-73552000D02* +X155348300Y-71819800D01* +X166878000Y-83204000D02* +X158877000Y-83204000D01* +X167386000Y-62757000D02* +X165928000Y-62757000D01* +X167640000Y-62503000D02* +X169291000Y-64154000D01* +X167640000Y-62503000D02* +X167386000Y-62757000D01* +X155194000Y-79775000D02* +X155194000Y-73706300D01* +X147447000Y-103903000D02* +X151147000Y-103903000D01* +X158623000Y-79290500D02* +X158381100Y-79048600D01* +X155194000Y-73706300D02* +X155348300Y-73552000D01* +X168148000Y-81934000D02* +X166878000Y-83204000D01* +X162096000Y-92666000D02* +X161671000Y-92666000D01* +X169291000Y-74060000D02* +X168529000Y-74822000D01* +X158623000Y-82950000D02* +X158623000Y-79290500D01* +X147422500Y-62061000D02* +X147423500Y-62060000D01* +X168021000Y-74822000D02* +X168148000Y-74949000D01* +X157861000Y-80537000D02* +X155956000Y-80537000D01* +%TD*% +M02* diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Gerbers/StudioMic-F_Mask.gbr b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Gerbers/StudioMic-F_Mask.gbr new file mode 100755 index 0000000..9a30619 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Gerbers/StudioMic-F_Mask.gbr @@ -0,0 +1,344 @@ +%TF.GenerationSoftware,KiCad,Pcbnew,(7.0.0)*% +%TF.CreationDate,2023-03-18T07:41:40+03:00*% +%TF.ProjectId,StudioMic,53747564-696f-44d6-9963-2e6b69636164,1*% +%TF.SameCoordinates,Original*% +%TF.FileFunction,Soldermask,Top*% +%TF.FilePolarity,Negative*% +%FSLAX46Y46*% +G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)* +G04 Created by KiCad (PCBNEW (7.0.0)) date 2023-03-18 07:41:40* +%MOMM*% +%LPD*% +G01* +G04 APERTURE LIST* +G04 Aperture macros list* +%AMRoundRect* +0 Rectangle with rounded corners* +0 $1 Rounding radius* +0 $2 $3 $4 $5 $6 $7 $8 $9 X,Y pos of 4 corners* +0 Add a 4 corners polygon primitive as box body* +4,1,4,$2,$3,$4,$5,$6,$7,$8,$9,$2,$3,0* +0 Add four circle primitives for the rounded corners* +1,1,$1+$1,$2,$3* +1,1,$1+$1,$4,$5* +1,1,$1+$1,$6,$7* +1,1,$1+$1,$8,$9* +0 Add four rect primitives between the rounded corners* +20,1,$1+$1,$2,$3,$4,$5,0* +20,1,$1+$1,$4,$5,$6,$7,0* +20,1,$1+$1,$6,$7,$8,$9,0* +20,1,$1+$1,$8,$9,$2,$3,0*% +G04 Aperture macros list end* +%ADD10RoundRect,0.250000X-0.475000X0.250000X-0.475000X-0.250000X0.475000X-0.250000X0.475000X0.250000X0*% +%ADD11RoundRect,0.250000X0.475000X-0.250000X0.475000X0.250000X-0.475000X0.250000X-0.475000X-0.250000X0*% +%ADD12RoundRect,0.150000X0.150000X-0.825000X0.150000X0.825000X-0.150000X0.825000X-0.150000X-0.825000X0*% +%ADD13RoundRect,0.250000X-0.600000X1.400000X-0.600000X-1.400000X0.600000X-1.400000X0.600000X1.400000X0*% +%ADD14RoundRect,0.250000X0.450000X-0.262500X0.450000X0.262500X-0.450000X0.262500X-0.450000X-0.262500X0*% +%ADD15RoundRect,0.250000X0.262500X0.450000X-0.262500X0.450000X-0.262500X-0.450000X0.262500X-0.450000X0*% +%ADD16RoundRect,0.250000X-0.250000X0.250000X-0.250000X-0.250000X0.250000X-0.250000X0.250000X0.250000X0*% +%ADD17RoundRect,0.250000X1.950000X1.000000X-1.950000X1.000000X-1.950000X-1.000000X1.950000X-1.000000X0*% +%ADD18RoundRect,0.250000X-0.450000X0.262500X-0.450000X-0.262500X0.450000X-0.262500X0.450000X0.262500X0*% +%ADD19RoundRect,0.250000X-0.262500X-0.450000X0.262500X-0.450000X0.262500X0.450000X-0.262500X0.450000X0*% +%ADD20RoundRect,0.250000X-0.250000X-0.475000X0.250000X-0.475000X0.250000X0.475000X-0.250000X0.475000X0*% +%ADD21RoundRect,0.250000X0.250000X0.475000X-0.250000X0.475000X-0.250000X-0.475000X0.250000X-0.475000X0*% +%ADD22O,3.500000X2.700000*% +%ADD23RoundRect,0.250000X0.250000X0.250000X-0.250000X0.250000X-0.250000X-0.250000X0.250000X-0.250000X0*% +%ADD24RoundRect,0.250000X1.000000X-1.950000X1.000000X1.950000X-1.000000X1.950000X-1.000000X-1.950000X0*% +%ADD25RoundRect,0.500000X-0.500000X-0.500000X0.500000X-0.500000X0.500000X0.500000X-0.500000X0.500000X0*% +%ADD26RoundRect,0.250000X-1.950000X-1.000000X1.950000X-1.000000X1.950000X1.000000X-1.950000X1.000000X0*% +%ADD27RoundRect,0.250000X-0.250000X-0.250000X0.250000X-0.250000X0.250000X0.250000X-0.250000X0.250000X0*% +%ADD28RoundRect,0.250000X-1.000000X1.950000X-1.000000X-1.950000X1.000000X-1.950000X1.000000X1.950000X0*% +%ADD29RoundRect,0.150000X-0.150000X0.825000X-0.150000X-0.825000X0.150000X-0.825000X0.150000X0.825000X0*% +G04 APERTURE END LIST* +D10* +%TO.C,C12*% +X162282500Y-79353400D03* +X162282500Y-77453400D03* +%TD*% +%TO.C,C8*% +X145087000Y-63688000D03* +X145087000Y-61788000D03* +%TD*% +D11* +%TO.C,C16*% +X159385000Y-65871000D03* +X159385000Y-67771000D03* +%TD*% +D12* +%TO.C,U2*% +X157126300Y-69944200D03* +X158396300Y-69944200D03* +X159666300Y-69944200D03* +X160936300Y-69944200D03* +X162206300Y-69944200D03* +X163476300Y-69944200D03* +X164746300Y-69944200D03* +X164746300Y-74894200D03* +X163476300Y-74894200D03* +X162206300Y-74894200D03* +X160936300Y-74894200D03* +X159666300Y-74894200D03* +X158396300Y-74894200D03* +X157126300Y-74894200D03* +%TD*% +D13* +%TO.C,D1*% +X161671000Y-92666000D03* +X161671000Y-87166000D03* +%TD*% +D14* +%TO.C,R12*% +X153138500Y-62333500D03* +X153138500Y-64158500D03* +%TD*% +D15* +%TO.C,R5*% +X151821500Y-80156000D03* +X153646500Y-80156000D03* +%TD*% +%TO.C,R10*% +X161522400Y-60598000D03* +X163347400Y-60598000D03* +%TD*% +D16* +%TO.C,D8*% +X157353000Y-65896800D03* +X157353000Y-63396800D03* +%TD*% +D17* +%TO.C,C3*% +X155771500Y-101600000D03* +X163171500Y-101600000D03* +%TD*% +D18* +%TO.C,R2*% +X152630500Y-121285000D03* +X152630500Y-119460000D03* +%TD*% +D19* +%TO.C,R6*% +X151384000Y-76346000D03* +X149559000Y-76346000D03* +%TD*% +D20* +%TO.C,C15*% +X164399000Y-67456000D03* +X162499000Y-67456000D03* +%TD*% +D10* +%TO.C,C11*% +X160250500Y-79353400D03* +X160250500Y-77453400D03* +%TD*% +D21* +%TO.C,C17*% +X161510300Y-62630000D03* +X163410300Y-62630000D03* +%TD*% +D22* +%TO.C,H1*% +X138143614Y-51396883D03* +%TD*% +D23* +%TO.C,D3*% +X161819900Y-81146600D03* +X164319900Y-81146600D03* +%TD*% +D18* +%TO.C,R9*% +X159666300Y-63908300D03* +X159666300Y-62083300D03* +%TD*% +D19* +%TO.C,R3*% +X163322000Y-118110000D03* +X161497000Y-118110000D03* +%TD*% +%TO.C,R11*% +X150391500Y-69361000D03* +X148566500Y-69361000D03* +%TD*% +D18* +%TO.C,R101*% +X136144000Y-58189500D03* +X136144000Y-56364500D03* +%TD*% +%TO.C,R102*% +X136144000Y-61642000D03* +X136144000Y-59817000D03* +%TD*% +%TO.C,R105*% +X136144000Y-71905500D03* +X136144000Y-70080500D03* +%TD*% +D19* +%TO.C,R7*% +X149582500Y-74314000D03* +X147757500Y-74314000D03* +%TD*% +D11* +%TO.C,C10*% +X155348300Y-69919800D03* +X155348300Y-71819800D03* +%TD*% +D19* +%TO.C,R4*% +X163322000Y-120396000D03* +X161497000Y-120396000D03* +%TD*% +D24* +%TO.C,C1*% +X157099000Y-108568000D03* +X157099000Y-115968000D03* +%TD*% +D25* +%TO.C,J1*% +X157630500Y-123444000D03* +X152630500Y-123444000D03* +X147630500Y-123444000D03* +%TD*% +D10* +%TO.C,C13*% +X164289100Y-79363600D03* +X164289100Y-77463600D03* +%TD*% +D20* +%TO.C,C19*% +X150683000Y-58928000D03* +X148783000Y-58928000D03* +%TD*% +D26* +%TO.C,C7*% +X155465000Y-88646000D03* +X148065000Y-88646000D03* +%TD*% +D19* +%TO.C,R107*% +X141247500Y-73660000D03* +X139422500Y-73660000D03* +%TD*% +D18* +%TO.C,R1*% +X157964500Y-121285000D03* +X157964500Y-119460000D03* +%TD*% +D27* +%TO.C,D7*% +X164318000Y-64916000D03* +X161818000Y-64916000D03* +%TD*% +D21* +%TO.C,C9*% +X156481100Y-79048600D03* +X158381100Y-79048600D03* +%TD*% +D23* +%TO.C,D2*% +X157349500Y-81934000D03* +X159849500Y-81934000D03* +%TD*% +D15* +%TO.C,R13*% +X155471500Y-56388000D03* +X153646500Y-56388000D03* +%TD*% +%TO.C,R8*% +X156544000Y-77092800D03* +X158369000Y-77092800D03* +%TD*% +D18* +%TO.C,R103*% +X136144000Y-65047500D03* +X136144000Y-63222500D03* +%TD*% +D16* +%TO.C,D4*% +X166295700Y-81162200D03* +X166295700Y-78662200D03* +%TD*% +D25* +%TO.C,MK1*% +X151304000Y-56388000D03* +X141304000Y-56388000D03* +%TD*% +D11* +%TO.C,C18*% +X165608000Y-60537000D03* +X165608000Y-62437000D03* +%TD*% +D18* +%TO.C,R104*% +X136144000Y-68476500D03* +X136144000Y-66651500D03* +%TD*% +D19* +%TO.C,R108*% +X144676500Y-73660000D03* +X142851500Y-73660000D03* +%TD*% +D22* +%TO.C,H2*% +X167143614Y-51396883D03* +%TD*% +D16* +%TO.C,D6*% +X167005000Y-68325000D03* +X167005000Y-65825000D03* +%TD*% +D14* +%TO.C,R109*% +X144526000Y-70080500D03* +X144526000Y-71905500D03* +%TD*% +D11* +%TO.C,C4*% +X164084000Y-88839000D03* +X164084000Y-90739000D03* +%TD*% +D19* +%TO.C,R106*% +X137795000Y-73660000D03* +X135970000Y-73660000D03* +%TD*% +D10* +%TO.C,C14*% +X166549700Y-71896000D03* +X166549700Y-69996000D03* +%TD*% +D16* +%TO.C,D5*% +X166676700Y-76234600D03* +X166676700Y-73734600D03* +%TD*% +D11* +%TO.C,C6*% +X149813000Y-79968000D03* +X149813000Y-81868000D03* +%TD*% +D24* +%TO.C,C2*% +X147447000Y-110981000D03* +X147447000Y-118381000D03* +%TD*% +D28* +%TO.C,C5*% +X147447000Y-103903000D03* +X147447000Y-96503000D03* +%TD*% +D14* +%TO.C,R110*% +X144526000Y-66651500D03* +X144526000Y-68476500D03* +%TD*% +D29* +%TO.C,U1*% +X151233500Y-67010000D03* +X149963500Y-67010000D03* +X148693500Y-67010000D03* +X147423500Y-67010000D03* +X147423500Y-62060000D03* +X148693500Y-62060000D03* +X149963500Y-62060000D03* +X151233500Y-62060000D03* +%TD*% +M02* diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Gerbers/StudioMic-F_Paste.gbr b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Gerbers/StudioMic-F_Paste.gbr new file mode 100755 index 0000000..65e2f99 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Gerbers/StudioMic-F_Paste.gbr @@ -0,0 +1,335 @@ +%TF.GenerationSoftware,KiCad,Pcbnew,(7.0.0)*% +%TF.CreationDate,2023-03-18T07:41:40+03:00*% +%TF.ProjectId,StudioMic,53747564-696f-44d6-9963-2e6b69636164,1*% +%TF.SameCoordinates,Original*% +%TF.FileFunction,Paste,Top*% +%TF.FilePolarity,Positive*% +%FSLAX46Y46*% +G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)* +G04 Created by KiCad (PCBNEW (7.0.0)) date 2023-03-18 07:41:40* +%MOMM*% +%LPD*% +G01* +G04 APERTURE LIST* +G04 Aperture macros list* +%AMRoundRect* +0 Rectangle with rounded corners* +0 $1 Rounding radius* +0 $2 $3 $4 $5 $6 $7 $8 $9 X,Y pos of 4 corners* +0 Add a 4 corners polygon primitive as box body* +4,1,4,$2,$3,$4,$5,$6,$7,$8,$9,$2,$3,0* +0 Add four circle primitives for the rounded corners* +1,1,$1+$1,$2,$3* +1,1,$1+$1,$4,$5* +1,1,$1+$1,$6,$7* +1,1,$1+$1,$8,$9* +0 Add four rect primitives between the rounded corners* +20,1,$1+$1,$2,$3,$4,$5,0* +20,1,$1+$1,$4,$5,$6,$7,0* +20,1,$1+$1,$6,$7,$8,$9,0* +20,1,$1+$1,$8,$9,$2,$3,0*% +G04 Aperture macros list end* +%ADD10RoundRect,0.250000X-0.475000X0.250000X-0.475000X-0.250000X0.475000X-0.250000X0.475000X0.250000X0*% +%ADD11RoundRect,0.250000X0.475000X-0.250000X0.475000X0.250000X-0.475000X0.250000X-0.475000X-0.250000X0*% +%ADD12RoundRect,0.150000X0.150000X-0.825000X0.150000X0.825000X-0.150000X0.825000X-0.150000X-0.825000X0*% +%ADD13RoundRect,0.250000X-0.600000X1.400000X-0.600000X-1.400000X0.600000X-1.400000X0.600000X1.400000X0*% +%ADD14RoundRect,0.250000X0.450000X-0.262500X0.450000X0.262500X-0.450000X0.262500X-0.450000X-0.262500X0*% +%ADD15RoundRect,0.250000X0.262500X0.450000X-0.262500X0.450000X-0.262500X-0.450000X0.262500X-0.450000X0*% +%ADD16RoundRect,0.250000X-0.250000X0.250000X-0.250000X-0.250000X0.250000X-0.250000X0.250000X0.250000X0*% +%ADD17RoundRect,0.250000X1.950000X1.000000X-1.950000X1.000000X-1.950000X-1.000000X1.950000X-1.000000X0*% +%ADD18RoundRect,0.250000X-0.450000X0.262500X-0.450000X-0.262500X0.450000X-0.262500X0.450000X0.262500X0*% +%ADD19RoundRect,0.250000X-0.262500X-0.450000X0.262500X-0.450000X0.262500X0.450000X-0.262500X0.450000X0*% +%ADD20RoundRect,0.250000X-0.250000X-0.475000X0.250000X-0.475000X0.250000X0.475000X-0.250000X0.475000X0*% +%ADD21RoundRect,0.250000X0.250000X0.475000X-0.250000X0.475000X-0.250000X-0.475000X0.250000X-0.475000X0*% +%ADD22RoundRect,0.250000X0.250000X0.250000X-0.250000X0.250000X-0.250000X-0.250000X0.250000X-0.250000X0*% +%ADD23RoundRect,0.250000X1.000000X-1.950000X1.000000X1.950000X-1.000000X1.950000X-1.000000X-1.950000X0*% +%ADD24RoundRect,0.500000X-0.500000X-0.500000X0.500000X-0.500000X0.500000X0.500000X-0.500000X0.500000X0*% +%ADD25RoundRect,0.250000X-1.950000X-1.000000X1.950000X-1.000000X1.950000X1.000000X-1.950000X1.000000X0*% +%ADD26RoundRect,0.250000X-0.250000X-0.250000X0.250000X-0.250000X0.250000X0.250000X-0.250000X0.250000X0*% +%ADD27RoundRect,0.250000X-1.000000X1.950000X-1.000000X-1.950000X1.000000X-1.950000X1.000000X1.950000X0*% +%ADD28RoundRect,0.150000X-0.150000X0.825000X-0.150000X-0.825000X0.150000X-0.825000X0.150000X0.825000X0*% +G04 APERTURE END LIST* +D10* +%TO.C,C12*% +X162282500Y-79353400D03* +X162282500Y-77453400D03* +%TD*% +%TO.C,C8*% +X145087000Y-63688000D03* +X145087000Y-61788000D03* +%TD*% +D11* +%TO.C,C16*% +X159385000Y-65871000D03* +X159385000Y-67771000D03* +%TD*% +D12* +%TO.C,U2*% +X157126300Y-69944200D03* +X158396300Y-69944200D03* +X159666300Y-69944200D03* +X160936300Y-69944200D03* +X162206300Y-69944200D03* +X163476300Y-69944200D03* +X164746300Y-69944200D03* +X164746300Y-74894200D03* +X163476300Y-74894200D03* +X162206300Y-74894200D03* +X160936300Y-74894200D03* +X159666300Y-74894200D03* +X158396300Y-74894200D03* +X157126300Y-74894200D03* +%TD*% +D13* +%TO.C,D1*% +X161671000Y-92666000D03* +X161671000Y-87166000D03* +%TD*% +D14* +%TO.C,R12*% +X153138500Y-62333500D03* +X153138500Y-64158500D03* +%TD*% +D15* +%TO.C,R5*% +X151821500Y-80156000D03* +X153646500Y-80156000D03* +%TD*% +%TO.C,R10*% +X161522400Y-60598000D03* +X163347400Y-60598000D03* +%TD*% +D16* +%TO.C,D8*% +X157353000Y-65896800D03* +X157353000Y-63396800D03* +%TD*% +D17* +%TO.C,C3*% +X155771500Y-101600000D03* +X163171500Y-101600000D03* +%TD*% +D18* +%TO.C,R2*% +X152630500Y-121285000D03* +X152630500Y-119460000D03* +%TD*% +D19* +%TO.C,R6*% +X151384000Y-76346000D03* +X149559000Y-76346000D03* +%TD*% +D20* +%TO.C,C15*% +X164399000Y-67456000D03* +X162499000Y-67456000D03* +%TD*% +D10* +%TO.C,C11*% +X160250500Y-79353400D03* +X160250500Y-77453400D03* +%TD*% +D21* +%TO.C,C17*% +X161510300Y-62630000D03* +X163410300Y-62630000D03* +%TD*% +D22* +%TO.C,D3*% +X161819900Y-81146600D03* +X164319900Y-81146600D03* +%TD*% +D18* +%TO.C,R9*% +X159666300Y-63908300D03* +X159666300Y-62083300D03* +%TD*% +D19* +%TO.C,R3*% +X163322000Y-118110000D03* +X161497000Y-118110000D03* +%TD*% +%TO.C,R11*% +X150391500Y-69361000D03* +X148566500Y-69361000D03* +%TD*% +D18* +%TO.C,R101*% +X136144000Y-58189500D03* +X136144000Y-56364500D03* +%TD*% +%TO.C,R102*% +X136144000Y-61642000D03* +X136144000Y-59817000D03* +%TD*% +%TO.C,R105*% +X136144000Y-71905500D03* +X136144000Y-70080500D03* +%TD*% +D19* +%TO.C,R7*% +X149582500Y-74314000D03* +X147757500Y-74314000D03* +%TD*% +D11* +%TO.C,C10*% +X155348300Y-69919800D03* +X155348300Y-71819800D03* +%TD*% +D19* +%TO.C,R4*% +X163322000Y-120396000D03* +X161497000Y-120396000D03* +%TD*% +D23* +%TO.C,C1*% +X157099000Y-108568000D03* +X157099000Y-115968000D03* +%TD*% +D24* +%TO.C,J1*% +X157630500Y-123444000D03* +X152630500Y-123444000D03* +X147630500Y-123444000D03* +%TD*% +D10* +%TO.C,C13*% +X164289100Y-79363600D03* +X164289100Y-77463600D03* +%TD*% +D20* +%TO.C,C19*% +X150683000Y-58928000D03* +X148783000Y-58928000D03* +%TD*% +D25* +%TO.C,C7*% +X155465000Y-88646000D03* +X148065000Y-88646000D03* +%TD*% +D19* +%TO.C,R107*% +X141247500Y-73660000D03* +X139422500Y-73660000D03* +%TD*% +D18* +%TO.C,R1*% +X157964500Y-121285000D03* +X157964500Y-119460000D03* +%TD*% +D26* +%TO.C,D7*% +X164318000Y-64916000D03* +X161818000Y-64916000D03* +%TD*% +D21* +%TO.C,C9*% +X156481100Y-79048600D03* +X158381100Y-79048600D03* +%TD*% +D22* +%TO.C,D2*% +X157349500Y-81934000D03* +X159849500Y-81934000D03* +%TD*% +D15* +%TO.C,R13*% +X155471500Y-56388000D03* +X153646500Y-56388000D03* +%TD*% +%TO.C,R8*% +X156544000Y-77092800D03* +X158369000Y-77092800D03* +%TD*% +D18* +%TO.C,R103*% +X136144000Y-65047500D03* +X136144000Y-63222500D03* +%TD*% +D16* +%TO.C,D4*% +X166295700Y-81162200D03* +X166295700Y-78662200D03* +%TD*% +D24* +%TO.C,MK1*% +X151304000Y-56388000D03* +X141304000Y-56388000D03* +%TD*% +D11* +%TO.C,C18*% +X165608000Y-60537000D03* +X165608000Y-62437000D03* +%TD*% +D18* +%TO.C,R104*% +X136144000Y-68476500D03* +X136144000Y-66651500D03* +%TD*% +D19* +%TO.C,R108*% +X144676500Y-73660000D03* +X142851500Y-73660000D03* +%TD*% +D16* +%TO.C,D6*% +X167005000Y-68325000D03* +X167005000Y-65825000D03* +%TD*% +D14* +%TO.C,R109*% +X144526000Y-70080500D03* +X144526000Y-71905500D03* +%TD*% +D11* +%TO.C,C4*% +X164084000Y-88839000D03* +X164084000Y-90739000D03* +%TD*% +D19* +%TO.C,R106*% +X137795000Y-73660000D03* +X135970000Y-73660000D03* +%TD*% +D10* +%TO.C,C14*% +X166549700Y-71896000D03* +X166549700Y-69996000D03* +%TD*% +D16* +%TO.C,D5*% +X166676700Y-76234600D03* +X166676700Y-73734600D03* +%TD*% +D11* +%TO.C,C6*% +X149813000Y-79968000D03* +X149813000Y-81868000D03* +%TD*% +D23* +%TO.C,C2*% +X147447000Y-110981000D03* +X147447000Y-118381000D03* +%TD*% +D27* +%TO.C,C5*% +X147447000Y-103903000D03* +X147447000Y-96503000D03* +%TD*% +D14* +%TO.C,R110*% +X144526000Y-66651500D03* +X144526000Y-68476500D03* +%TD*% +D28* +%TO.C,U1*% +X151233500Y-67010000D03* +X149963500Y-67010000D03* +X148693500Y-67010000D03* +X147423500Y-67010000D03* +X147423500Y-62060000D03* +X148693500Y-62060000D03* +X149963500Y-62060000D03* +X151233500Y-62060000D03* +%TD*% +M02* diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Gerbers/StudioMic-F_Silkscreen.gbr b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Gerbers/StudioMic-F_Silkscreen.gbr new file mode 100755 index 0000000..2f26fca --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Gerbers/StudioMic-F_Silkscreen.gbr @@ -0,0 +1,5820 @@ +%TF.GenerationSoftware,KiCad,Pcbnew,(7.0.0)*% +%TF.CreationDate,2023-03-18T07:41:40+03:00*% +%TF.ProjectId,StudioMic,53747564-696f-44d6-9963-2e6b69636164,1*% +%TF.SameCoordinates,Original*% +%TF.FileFunction,Legend,Top*% +%TF.FilePolarity,Positive*% +%FSLAX46Y46*% +G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)* +G04 Created by KiCad (PCBNEW (7.0.0)) date 2023-03-18 07:41:40* +%MOMM*% +%LPD*% +G01* +G04 APERTURE LIST* +%ADD10C,0.150000*% +%ADD11C,0.329000*% +%ADD12C,0.120000*% +G04 APERTURE END LIST* +D10* +X151257000Y-54737000D02* +X151257000Y-55245000D01* +X139827000Y-56388000D02* +X140208000Y-56388000D01* +X139827000Y-58166000D02* +X139827000Y-56388000D01* +D11* +X156120500Y-75946000D02* +G75* +G03* +X156120500Y-75946000I-164500J0D01* +G01* +D10* +X145542000Y-74676000D02* +X135128000Y-74676000D01* +X135128000Y-55499000D02* +X137160000Y-55499000D01* +X169409936Y-51396884D02* +G75* +G03* +X169409936Y-51396884I-2265936J0D01* +G01* +X140397552Y-51396884D02* +G75* +G03* +X140397552Y-51396884I-2253937J0D01* +G01* +X161036000Y-82061000D02* +X161036000Y-80156000D01* +X167132000Y-62122000D02* +X167132000Y-62757000D01* +X145542000Y-65913000D02* +X145542000Y-74676000D01* +X167386000Y-63519000D02* +X166116000Y-63519000D01* +X167386000Y-64535000D02* +X165989000Y-64535000D01* +X161036000Y-80156000D02* +X160825174Y-80366826D01* +X161036000Y-80156000D02* +X161246826Y-80366826D01* +X167513000Y-61741000D02* +X167132000Y-62122000D01* +X165354000Y-66186000D02* +X164846000Y-66694000D01* +X166624000Y-63265000D02* +X164211000Y-63265000D01* +X143510000Y-65913000D02* +X145542000Y-65913000D01* +X165989000Y-64535000D02* +X165354000Y-65170000D01* +X143510000Y-72644000D02* +X137160000Y-72644000D01* +X135128000Y-74676000D02* +X135128000Y-55499000D01* +X143510000Y-72644000D02* +X143510000Y-65913000D01* +D11* +X152056500Y-60452000D02* +G75* +G03* +X152056500Y-60452000I-164500J0D01* +G01* +D10* +X167132000Y-62757000D02* +X166624000Y-63265000D01* +X166116000Y-63519000D02* +X165100000Y-64535000D01* +X137160000Y-72644000D02* +X137160000Y-55499000D01* +X165354000Y-65170000D02* +X165354000Y-66186000D01* +X161036000Y-82442000D02* +X161036000Y-82061000D01* +X136445523Y-76490380D02* +X136112190Y-76014190D01* +X135874095Y-76490380D02* +X135874095Y-75490380D01* +X135874095Y-75490380D02* +X136255047Y-75490380D01* +X136255047Y-75490380D02* +X136350285Y-75538000D01* +X136350285Y-75538000D02* +X136397904Y-75585619D01* +X136397904Y-75585619D02* +X136445523Y-75680857D01* +X136445523Y-75680857D02* +X136445523Y-75823714D01* +X136445523Y-75823714D02* +X136397904Y-75918952D01* +X136397904Y-75918952D02* +X136350285Y-75966571D01* +X136350285Y-75966571D02* +X136255047Y-76014190D01* +X136255047Y-76014190D02* +X135874095Y-76014190D01* +X137397904Y-76490380D02* +X136826476Y-76490380D01* +X137112190Y-76490380D02* +X137112190Y-75490380D01* +X137112190Y-75490380D02* +X137016952Y-75633238D01* +X137016952Y-75633238D02* +X136921714Y-75728476D01* +X136921714Y-75728476D02* +X136826476Y-75776095D01* +X138016952Y-75490380D02* +X138112190Y-75490380D01* +X138112190Y-75490380D02* +X138207428Y-75538000D01* +X138207428Y-75538000D02* +X138255047Y-75585619D01* +X138255047Y-75585619D02* +X138302666Y-75680857D01* +X138302666Y-75680857D02* +X138350285Y-75871333D01* +X138350285Y-75871333D02* +X138350285Y-76109428D01* +X138350285Y-76109428D02* +X138302666Y-76299904D01* +X138302666Y-76299904D02* +X138255047Y-76395142D01* +X138255047Y-76395142D02* +X138207428Y-76442761D01* +X138207428Y-76442761D02* +X138112190Y-76490380D01* +X138112190Y-76490380D02* +X138016952Y-76490380D01* +X138016952Y-76490380D02* +X137921714Y-76442761D01* +X137921714Y-76442761D02* +X137874095Y-76395142D01* +X137874095Y-76395142D02* +X137826476Y-76299904D01* +X137826476Y-76299904D02* +X137778857Y-76109428D01* +X137778857Y-76109428D02* +X137778857Y-75871333D01* +X137778857Y-75871333D02* +X137826476Y-75680857D01* +X137826476Y-75680857D02* +X137874095Y-75585619D01* +X137874095Y-75585619D02* +X137921714Y-75538000D01* +X137921714Y-75538000D02* +X138016952Y-75490380D01* +X139302666Y-76490380D02* +X138731238Y-76490380D01* +X139016952Y-76490380D02* +X139016952Y-75490380D01* +X139016952Y-75490380D02* +X138921714Y-75633238D01* +X138921714Y-75633238D02* +X138826476Y-75728476D01* +X138826476Y-75728476D02* +X138731238Y-75776095D01* +X139731238Y-76109428D02* +X140493143Y-76109428D01* +X141540761Y-76490380D02* +X141207428Y-76014190D01* +X140969333Y-76490380D02* +X140969333Y-75490380D01* +X140969333Y-75490380D02* +X141350285Y-75490380D01* +X141350285Y-75490380D02* +X141445523Y-75538000D01* +X141445523Y-75538000D02* +X141493142Y-75585619D01* +X141493142Y-75585619D02* +X141540761Y-75680857D01* +X141540761Y-75680857D02* +X141540761Y-75823714D01* +X141540761Y-75823714D02* +X141493142Y-75918952D01* +X141493142Y-75918952D02* +X141445523Y-75966571D01* +X141445523Y-75966571D02* +X141350285Y-76014190D01* +X141350285Y-76014190D02* +X140969333Y-76014190D01* +X142493142Y-76490380D02* +X141921714Y-76490380D01* +X142207428Y-76490380D02* +X142207428Y-75490380D01* +X142207428Y-75490380D02* +X142112190Y-75633238D01* +X142112190Y-75633238D02* +X142016952Y-75728476D01* +X142016952Y-75728476D02* +X141921714Y-75776095D01* +X143445523Y-76490380D02* +X142874095Y-76490380D01* +X143159809Y-76490380D02* +X143159809Y-75490380D01* +X143159809Y-75490380D02* +X143064571Y-75633238D01* +X143064571Y-75633238D02* +X142969333Y-75728476D01* +X142969333Y-75728476D02* +X142874095Y-75776095D01* +X144064571Y-75490380D02* +X144159809Y-75490380D01* +X144159809Y-75490380D02* +X144255047Y-75538000D01* +X144255047Y-75538000D02* +X144302666Y-75585619D01* +X144302666Y-75585619D02* +X144350285Y-75680857D01* +X144350285Y-75680857D02* +X144397904Y-75871333D01* +X144397904Y-75871333D02* +X144397904Y-76109428D01* +X144397904Y-76109428D02* +X144350285Y-76299904D01* +X144350285Y-76299904D02* +X144302666Y-76395142D01* +X144302666Y-76395142D02* +X144255047Y-76442761D01* +X144255047Y-76442761D02* +X144159809Y-76490380D01* +X144159809Y-76490380D02* +X144064571Y-76490380D01* +X144064571Y-76490380D02* +X143969333Y-76442761D01* +X143969333Y-76442761D02* +X143921714Y-76395142D01* +X143921714Y-76395142D02* +X143874095Y-76299904D01* +X143874095Y-76299904D02* +X143826476Y-76109428D01* +X143826476Y-76109428D02* +X143826476Y-75871333D01* +X143826476Y-75871333D02* +X143874095Y-75680857D01* +X143874095Y-75680857D02* +X143921714Y-75585619D01* +X143921714Y-75585619D02* +X143969333Y-75538000D01* +X143969333Y-75538000D02* +X144064571Y-75490380D01* +%TO.C,C12*% +X163187742Y-84238057D02* +X163235361Y-84285676D01* +X163235361Y-84285676D02* +X163282980Y-84428533D01* +X163282980Y-84428533D02* +X163282980Y-84523771D01* +X163282980Y-84523771D02* +X163235361Y-84666628D01* +X163235361Y-84666628D02* +X163140123Y-84761866D01* +X163140123Y-84761866D02* +X163044885Y-84809485D01* +X163044885Y-84809485D02* +X162854409Y-84857104D01* +X162854409Y-84857104D02* +X162711552Y-84857104D01* +X162711552Y-84857104D02* +X162521076Y-84809485D01* +X162521076Y-84809485D02* +X162425838Y-84761866D01* +X162425838Y-84761866D02* +X162330600Y-84666628D01* +X162330600Y-84666628D02* +X162282980Y-84523771D01* +X162282980Y-84523771D02* +X162282980Y-84428533D01* +X162282980Y-84428533D02* +X162330600Y-84285676D01* +X162330600Y-84285676D02* +X162378219Y-84238057D01* +X163282980Y-83285676D02* +X163282980Y-83857104D01* +X163282980Y-83571390D02* +X162282980Y-83571390D01* +X162282980Y-83571390D02* +X162425838Y-83666628D01* +X162425838Y-83666628D02* +X162521076Y-83761866D01* +X162521076Y-83761866D02* +X162568695Y-83857104D01* +X162378219Y-82904723D02* +X162330600Y-82857104D01* +X162330600Y-82857104D02* +X162282980Y-82761866D01* +X162282980Y-82761866D02* +X162282980Y-82523771D01* +X162282980Y-82523771D02* +X162330600Y-82428533D01* +X162330600Y-82428533D02* +X162378219Y-82380914D01* +X162378219Y-82380914D02* +X162473457Y-82333295D01* +X162473457Y-82333295D02* +X162568695Y-82333295D01* +X162568695Y-82333295D02* +X162711552Y-82380914D01* +X162711552Y-82380914D02* +X163282980Y-82952342D01* +X163282980Y-82952342D02* +X163282980Y-82333295D01* +%TO.C,C8*% +X142962333Y-63010142D02* +X142914714Y-63057761D01* +X142914714Y-63057761D02* +X142771857Y-63105380D01* +X142771857Y-63105380D02* +X142676619Y-63105380D01* +X142676619Y-63105380D02* +X142533762Y-63057761D01* +X142533762Y-63057761D02* +X142438524Y-62962523D01* +X142438524Y-62962523D02* +X142390905Y-62867285D01* +X142390905Y-62867285D02* +X142343286Y-62676809D01* +X142343286Y-62676809D02* +X142343286Y-62533952D01* +X142343286Y-62533952D02* +X142390905Y-62343476D01* +X142390905Y-62343476D02* +X142438524Y-62248238D01* +X142438524Y-62248238D02* +X142533762Y-62153000D01* +X142533762Y-62153000D02* +X142676619Y-62105380D01* +X142676619Y-62105380D02* +X142771857Y-62105380D01* +X142771857Y-62105380D02* +X142914714Y-62153000D01* +X142914714Y-62153000D02* +X142962333Y-62200619D01* +X143533762Y-62533952D02* +X143438524Y-62486333D01* +X143438524Y-62486333D02* +X143390905Y-62438714D01* +X143390905Y-62438714D02* +X143343286Y-62343476D01* +X143343286Y-62343476D02* +X143343286Y-62295857D01* +X143343286Y-62295857D02* +X143390905Y-62200619D01* +X143390905Y-62200619D02* +X143438524Y-62153000D01* +X143438524Y-62153000D02* +X143533762Y-62105380D01* +X143533762Y-62105380D02* +X143724238Y-62105380D01* +X143724238Y-62105380D02* +X143819476Y-62153000D01* +X143819476Y-62153000D02* +X143867095Y-62200619D01* +X143867095Y-62200619D02* +X143914714Y-62295857D01* +X143914714Y-62295857D02* +X143914714Y-62343476D01* +X143914714Y-62343476D02* +X143867095Y-62438714D01* +X143867095Y-62438714D02* +X143819476Y-62486333D01* +X143819476Y-62486333D02* +X143724238Y-62533952D01* +X143724238Y-62533952D02* +X143533762Y-62533952D01* +X143533762Y-62533952D02* +X143438524Y-62581571D01* +X143438524Y-62581571D02* +X143390905Y-62629190D01* +X143390905Y-62629190D02* +X143343286Y-62724428D01* +X143343286Y-62724428D02* +X143343286Y-62914904D01* +X143343286Y-62914904D02* +X143390905Y-63010142D01* +X143390905Y-63010142D02* +X143438524Y-63057761D01* +X143438524Y-63057761D02* +X143533762Y-63105380D01* +X143533762Y-63105380D02* +X143724238Y-63105380D01* +X143724238Y-63105380D02* +X143819476Y-63057761D01* +X143819476Y-63057761D02* +X143867095Y-63010142D01* +X143867095Y-63010142D02* +X143914714Y-62914904D01* +X143914714Y-62914904D02* +X143914714Y-62724428D01* +X143914714Y-62724428D02* +X143867095Y-62629190D01* +X143867095Y-62629190D02* +X143819476Y-62581571D01* +X143819476Y-62581571D02* +X143724238Y-62533952D01* +%TO.C,C16*% +X156583142Y-67963142D02* +X156535523Y-68010761D01* +X156535523Y-68010761D02* +X156392666Y-68058380D01* +X156392666Y-68058380D02* +X156297428Y-68058380D01* +X156297428Y-68058380D02* +X156154571Y-68010761D01* +X156154571Y-68010761D02* +X156059333Y-67915523D01* +X156059333Y-67915523D02* +X156011714Y-67820285D01* +X156011714Y-67820285D02* +X155964095Y-67629809D01* +X155964095Y-67629809D02* +X155964095Y-67486952D01* +X155964095Y-67486952D02* +X156011714Y-67296476D01* +X156011714Y-67296476D02* +X156059333Y-67201238D01* +X156059333Y-67201238D02* +X156154571Y-67106000D01* +X156154571Y-67106000D02* +X156297428Y-67058380D01* +X156297428Y-67058380D02* +X156392666Y-67058380D01* +X156392666Y-67058380D02* +X156535523Y-67106000D01* +X156535523Y-67106000D02* +X156583142Y-67153619D01* +X157535523Y-68058380D02* +X156964095Y-68058380D01* +X157249809Y-68058380D02* +X157249809Y-67058380D01* +X157249809Y-67058380D02* +X157154571Y-67201238D01* +X157154571Y-67201238D02* +X157059333Y-67296476D01* +X157059333Y-67296476D02* +X156964095Y-67344095D01* +X158392666Y-67058380D02* +X158202190Y-67058380D01* +X158202190Y-67058380D02* +X158106952Y-67106000D01* +X158106952Y-67106000D02* +X158059333Y-67153619D01* +X158059333Y-67153619D02* +X157964095Y-67296476D01* +X157964095Y-67296476D02* +X157916476Y-67486952D01* +X157916476Y-67486952D02* +X157916476Y-67867904D01* +X157916476Y-67867904D02* +X157964095Y-67963142D01* +X157964095Y-67963142D02* +X158011714Y-68010761D01* +X158011714Y-68010761D02* +X158106952Y-68058380D01* +X158106952Y-68058380D02* +X158297428Y-68058380D01* +X158297428Y-68058380D02* +X158392666Y-68010761D01* +X158392666Y-68010761D02* +X158440285Y-67963142D01* +X158440285Y-67963142D02* +X158487904Y-67867904D01* +X158487904Y-67867904D02* +X158487904Y-67629809D01* +X158487904Y-67629809D02* +X158440285Y-67534571D01* +X158440285Y-67534571D02* +X158392666Y-67486952D01* +X158392666Y-67486952D02* +X158297428Y-67439333D01* +X158297428Y-67439333D02* +X158106952Y-67439333D01* +X158106952Y-67439333D02* +X158011714Y-67486952D01* +X158011714Y-67486952D02* +X157964095Y-67534571D01* +X157964095Y-67534571D02* +X157916476Y-67629809D01* +%TO.C,U2*% +X154559095Y-74170380D02* +X154559095Y-74979904D01* +X154559095Y-74979904D02* +X154606714Y-75075142D01* +X154606714Y-75075142D02* +X154654333Y-75122761D01* +X154654333Y-75122761D02* +X154749571Y-75170380D01* +X154749571Y-75170380D02* +X154940047Y-75170380D01* +X154940047Y-75170380D02* +X155035285Y-75122761D01* +X155035285Y-75122761D02* +X155082904Y-75075142D01* +X155082904Y-75075142D02* +X155130523Y-74979904D01* +X155130523Y-74979904D02* +X155130523Y-74170380D01* +X155559095Y-74265619D02* +X155606714Y-74218000D01* +X155606714Y-74218000D02* +X155701952Y-74170380D01* +X155701952Y-74170380D02* +X155940047Y-74170380D01* +X155940047Y-74170380D02* +X156035285Y-74218000D01* +X156035285Y-74218000D02* +X156082904Y-74265619D01* +X156082904Y-74265619D02* +X156130523Y-74360857D01* +X156130523Y-74360857D02* +X156130523Y-74456095D01* +X156130523Y-74456095D02* +X156082904Y-74598952D01* +X156082904Y-74598952D02* +X155511476Y-75170380D01* +X155511476Y-75170380D02* +X156130523Y-75170380D01* +%TO.C,D1*% +X161059905Y-95871380D02* +X161059905Y-94871380D01* +X161059905Y-94871380D02* +X161298000Y-94871380D01* +X161298000Y-94871380D02* +X161440857Y-94919000D01* +X161440857Y-94919000D02* +X161536095Y-95014238D01* +X161536095Y-95014238D02* +X161583714Y-95109476D01* +X161583714Y-95109476D02* +X161631333Y-95299952D01* +X161631333Y-95299952D02* +X161631333Y-95442809D01* +X161631333Y-95442809D02* +X161583714Y-95633285D01* +X161583714Y-95633285D02* +X161536095Y-95728523D01* +X161536095Y-95728523D02* +X161440857Y-95823761D01* +X161440857Y-95823761D02* +X161298000Y-95871380D01* +X161298000Y-95871380D02* +X161059905Y-95871380D01* +X162583714Y-95871380D02* +X162012286Y-95871380D01* +X162298000Y-95871380D02* +X162298000Y-94871380D01* +X162298000Y-94871380D02* +X162202762Y-95014238D01* +X162202762Y-95014238D02* +X162107524Y-95109476D01* +X162107524Y-95109476D02* +X162012286Y-95157095D01* +%TO.C,R12*% +X153789142Y-61581380D02* +X153455809Y-61105190D01* +X153217714Y-61581380D02* +X153217714Y-60581380D01* +X153217714Y-60581380D02* +X153598666Y-60581380D01* +X153598666Y-60581380D02* +X153693904Y-60629000D01* +X153693904Y-60629000D02* +X153741523Y-60676619D01* +X153741523Y-60676619D02* +X153789142Y-60771857D01* +X153789142Y-60771857D02* +X153789142Y-60914714D01* +X153789142Y-60914714D02* +X153741523Y-61009952D01* +X153741523Y-61009952D02* +X153693904Y-61057571D01* +X153693904Y-61057571D02* +X153598666Y-61105190D01* +X153598666Y-61105190D02* +X153217714Y-61105190D01* +X154741523Y-61581380D02* +X154170095Y-61581380D01* +X154455809Y-61581380D02* +X154455809Y-60581380D01* +X154455809Y-60581380D02* +X154360571Y-60724238D01* +X154360571Y-60724238D02* +X154265333Y-60819476D01* +X154265333Y-60819476D02* +X154170095Y-60867095D01* +X155122476Y-60676619D02* +X155170095Y-60629000D01* +X155170095Y-60629000D02* +X155265333Y-60581380D01* +X155265333Y-60581380D02* +X155503428Y-60581380D01* +X155503428Y-60581380D02* +X155598666Y-60629000D01* +X155598666Y-60629000D02* +X155646285Y-60676619D01* +X155646285Y-60676619D02* +X155693904Y-60771857D01* +X155693904Y-60771857D02* +X155693904Y-60867095D01* +X155693904Y-60867095D02* +X155646285Y-61009952D01* +X155646285Y-61009952D02* +X155074857Y-61581380D01* +X155074857Y-61581380D02* +X155693904Y-61581380D01* +%TO.C,R5*% +X152567333Y-82173380D02* +X152234000Y-81697190D01* +X151995905Y-82173380D02* +X151995905Y-81173380D01* +X151995905Y-81173380D02* +X152376857Y-81173380D01* +X152376857Y-81173380D02* +X152472095Y-81221000D01* +X152472095Y-81221000D02* +X152519714Y-81268619D01* +X152519714Y-81268619D02* +X152567333Y-81363857D01* +X152567333Y-81363857D02* +X152567333Y-81506714D01* +X152567333Y-81506714D02* +X152519714Y-81601952D01* +X152519714Y-81601952D02* +X152472095Y-81649571D01* +X152472095Y-81649571D02* +X152376857Y-81697190D01* +X152376857Y-81697190D02* +X151995905Y-81697190D01* +X153472095Y-81173380D02* +X152995905Y-81173380D01* +X152995905Y-81173380D02* +X152948286Y-81649571D01* +X152948286Y-81649571D02* +X152995905Y-81601952D01* +X152995905Y-81601952D02* +X153091143Y-81554333D01* +X153091143Y-81554333D02* +X153329238Y-81554333D01* +X153329238Y-81554333D02* +X153424476Y-81601952D01* +X153424476Y-81601952D02* +X153472095Y-81649571D01* +X153472095Y-81649571D02* +X153519714Y-81744809D01* +X153519714Y-81744809D02* +X153519714Y-81982904D01* +X153519714Y-81982904D02* +X153472095Y-82078142D01* +X153472095Y-82078142D02* +X153424476Y-82125761D01* +X153424476Y-82125761D02* +X153329238Y-82173380D01* +X153329238Y-82173380D02* +X153091143Y-82173380D01* +X153091143Y-82173380D02* +X152995905Y-82125761D01* +X152995905Y-82125761D02* +X152948286Y-82078142D01* +%TO.C,R10*% +X160189942Y-59498580D02* +X159856609Y-59022390D01* +X159618514Y-59498580D02* +X159618514Y-58498580D01* +X159618514Y-58498580D02* +X159999466Y-58498580D01* +X159999466Y-58498580D02* +X160094704Y-58546200D01* +X160094704Y-58546200D02* +X160142323Y-58593819D01* +X160142323Y-58593819D02* +X160189942Y-58689057D01* +X160189942Y-58689057D02* +X160189942Y-58831914D01* +X160189942Y-58831914D02* +X160142323Y-58927152D01* +X160142323Y-58927152D02* +X160094704Y-58974771D01* +X160094704Y-58974771D02* +X159999466Y-59022390D01* +X159999466Y-59022390D02* +X159618514Y-59022390D01* +X161142323Y-59498580D02* +X160570895Y-59498580D01* +X160856609Y-59498580D02* +X160856609Y-58498580D01* +X160856609Y-58498580D02* +X160761371Y-58641438D01* +X160761371Y-58641438D02* +X160666133Y-58736676D01* +X160666133Y-58736676D02* +X160570895Y-58784295D01* +X161761371Y-58498580D02* +X161856609Y-58498580D01* +X161856609Y-58498580D02* +X161951847Y-58546200D01* +X161951847Y-58546200D02* +X161999466Y-58593819D01* +X161999466Y-58593819D02* +X162047085Y-58689057D01* +X162047085Y-58689057D02* +X162094704Y-58879533D01* +X162094704Y-58879533D02* +X162094704Y-59117628D01* +X162094704Y-59117628D02* +X162047085Y-59308104D01* +X162047085Y-59308104D02* +X161999466Y-59403342D01* +X161999466Y-59403342D02* +X161951847Y-59450961D01* +X161951847Y-59450961D02* +X161856609Y-59498580D01* +X161856609Y-59498580D02* +X161761371Y-59498580D01* +X161761371Y-59498580D02* +X161666133Y-59450961D01* +X161666133Y-59450961D02* +X161618514Y-59403342D01* +X161618514Y-59403342D02* +X161570895Y-59308104D01* +X161570895Y-59308104D02* +X161523276Y-59117628D01* +X161523276Y-59117628D02* +X161523276Y-58879533D01* +X161523276Y-58879533D02* +X161570895Y-58689057D01* +X161570895Y-58689057D02* +X161618514Y-58593819D01* +X161618514Y-58593819D02* +X161666133Y-58546200D01* +X161666133Y-58546200D02* +X161761371Y-58498580D01* +%TO.C,D8*% +X154836905Y-65014180D02* +X154836905Y-64014180D01* +X154836905Y-64014180D02* +X155075000Y-64014180D01* +X155075000Y-64014180D02* +X155217857Y-64061800D01* +X155217857Y-64061800D02* +X155313095Y-64157038D01* +X155313095Y-64157038D02* +X155360714Y-64252276D01* +X155360714Y-64252276D02* +X155408333Y-64442752D01* +X155408333Y-64442752D02* +X155408333Y-64585609D01* +X155408333Y-64585609D02* +X155360714Y-64776085D01* +X155360714Y-64776085D02* +X155313095Y-64871323D01* +X155313095Y-64871323D02* +X155217857Y-64966561D01* +X155217857Y-64966561D02* +X155075000Y-65014180D01* +X155075000Y-65014180D02* +X154836905Y-65014180D01* +X155979762Y-64442752D02* +X155884524Y-64395133D01* +X155884524Y-64395133D02* +X155836905Y-64347514D01* +X155836905Y-64347514D02* +X155789286Y-64252276D01* +X155789286Y-64252276D02* +X155789286Y-64204657D01* +X155789286Y-64204657D02* +X155836905Y-64109419D01* +X155836905Y-64109419D02* +X155884524Y-64061800D01* +X155884524Y-64061800D02* +X155979762Y-64014180D01* +X155979762Y-64014180D02* +X156170238Y-64014180D01* +X156170238Y-64014180D02* +X156265476Y-64061800D01* +X156265476Y-64061800D02* +X156313095Y-64109419D01* +X156313095Y-64109419D02* +X156360714Y-64204657D01* +X156360714Y-64204657D02* +X156360714Y-64252276D01* +X156360714Y-64252276D02* +X156313095Y-64347514D01* +X156313095Y-64347514D02* +X156265476Y-64395133D01* +X156265476Y-64395133D02* +X156170238Y-64442752D01* +X156170238Y-64442752D02* +X155979762Y-64442752D01* +X155979762Y-64442752D02* +X155884524Y-64490371D01* +X155884524Y-64490371D02* +X155836905Y-64537990D01* +X155836905Y-64537990D02* +X155789286Y-64633228D01* +X155789286Y-64633228D02* +X155789286Y-64823704D01* +X155789286Y-64823704D02* +X155836905Y-64918942D01* +X155836905Y-64918942D02* +X155884524Y-64966561D01* +X155884524Y-64966561D02* +X155979762Y-65014180D01* +X155979762Y-65014180D02* +X156170238Y-65014180D01* +X156170238Y-65014180D02* +X156265476Y-64966561D01* +X156265476Y-64966561D02* +X156313095Y-64918942D01* +X156313095Y-64918942D02* +X156360714Y-64823704D01* +X156360714Y-64823704D02* +X156360714Y-64633228D01* +X156360714Y-64633228D02* +X156313095Y-64537990D01* +X156313095Y-64537990D02* +X156265476Y-64490371D01* +X156265476Y-64490371D02* +X156170238Y-64442752D01* +%TO.C,C3*% +X166838333Y-101745142D02* +X166790714Y-101792761D01* +X166790714Y-101792761D02* +X166647857Y-101840380D01* +X166647857Y-101840380D02* +X166552619Y-101840380D01* +X166552619Y-101840380D02* +X166409762Y-101792761D01* +X166409762Y-101792761D02* +X166314524Y-101697523D01* +X166314524Y-101697523D02* +X166266905Y-101602285D01* +X166266905Y-101602285D02* +X166219286Y-101411809D01* +X166219286Y-101411809D02* +X166219286Y-101268952D01* +X166219286Y-101268952D02* +X166266905Y-101078476D01* +X166266905Y-101078476D02* +X166314524Y-100983238D01* +X166314524Y-100983238D02* +X166409762Y-100888000D01* +X166409762Y-100888000D02* +X166552619Y-100840380D01* +X166552619Y-100840380D02* +X166647857Y-100840380D01* +X166647857Y-100840380D02* +X166790714Y-100888000D01* +X166790714Y-100888000D02* +X166838333Y-100935619D01* +X167171667Y-100840380D02* +X167790714Y-100840380D01* +X167790714Y-100840380D02* +X167457381Y-101221333D01* +X167457381Y-101221333D02* +X167600238Y-101221333D01* +X167600238Y-101221333D02* +X167695476Y-101268952D01* +X167695476Y-101268952D02* +X167743095Y-101316571D01* +X167743095Y-101316571D02* +X167790714Y-101411809D01* +X167790714Y-101411809D02* +X167790714Y-101649904D01* +X167790714Y-101649904D02* +X167743095Y-101745142D01* +X167743095Y-101745142D02* +X167695476Y-101792761D01* +X167695476Y-101792761D02* +X167600238Y-101840380D01* +X167600238Y-101840380D02* +X167314524Y-101840380D01* +X167314524Y-101840380D02* +X167219286Y-101792761D01* +X167219286Y-101792761D02* +X167171667Y-101745142D01* +%TO.C,R2*% +X154265333Y-120763380D02* +X153932000Y-120287190D01* +X153693905Y-120763380D02* +X153693905Y-119763380D01* +X153693905Y-119763380D02* +X154074857Y-119763380D01* +X154074857Y-119763380D02* +X154170095Y-119811000D01* +X154170095Y-119811000D02* +X154217714Y-119858619D01* +X154217714Y-119858619D02* +X154265333Y-119953857D01* +X154265333Y-119953857D02* +X154265333Y-120096714D01* +X154265333Y-120096714D02* +X154217714Y-120191952D01* +X154217714Y-120191952D02* +X154170095Y-120239571D01* +X154170095Y-120239571D02* +X154074857Y-120287190D01* +X154074857Y-120287190D02* +X153693905Y-120287190D01* +X154646286Y-119858619D02* +X154693905Y-119811000D01* +X154693905Y-119811000D02* +X154789143Y-119763380D01* +X154789143Y-119763380D02* +X155027238Y-119763380D01* +X155027238Y-119763380D02* +X155122476Y-119811000D01* +X155122476Y-119811000D02* +X155170095Y-119858619D01* +X155170095Y-119858619D02* +X155217714Y-119953857D01* +X155217714Y-119953857D02* +X155217714Y-120049095D01* +X155217714Y-120049095D02* +X155170095Y-120191952D01* +X155170095Y-120191952D02* +X154598667Y-120763380D01* +X154598667Y-120763380D02* +X155217714Y-120763380D01* +%TO.C,R6*% +X150304833Y-78491380D02* +X149971500Y-78015190D01* +X149733405Y-78491380D02* +X149733405Y-77491380D01* +X149733405Y-77491380D02* +X150114357Y-77491380D01* +X150114357Y-77491380D02* +X150209595Y-77539000D01* +X150209595Y-77539000D02* +X150257214Y-77586619D01* +X150257214Y-77586619D02* +X150304833Y-77681857D01* +X150304833Y-77681857D02* +X150304833Y-77824714D01* +X150304833Y-77824714D02* +X150257214Y-77919952D01* +X150257214Y-77919952D02* +X150209595Y-77967571D01* +X150209595Y-77967571D02* +X150114357Y-78015190D01* +X150114357Y-78015190D02* +X149733405Y-78015190D01* +X151161976Y-77491380D02* +X150971500Y-77491380D01* +X150971500Y-77491380D02* +X150876262Y-77539000D01* +X150876262Y-77539000D02* +X150828643Y-77586619D01* +X150828643Y-77586619D02* +X150733405Y-77729476D01* +X150733405Y-77729476D02* +X150685786Y-77919952D01* +X150685786Y-77919952D02* +X150685786Y-78300904D01* +X150685786Y-78300904D02* +X150733405Y-78396142D01* +X150733405Y-78396142D02* +X150781024Y-78443761D01* +X150781024Y-78443761D02* +X150876262Y-78491380D01* +X150876262Y-78491380D02* +X151066738Y-78491380D01* +X151066738Y-78491380D02* +X151161976Y-78443761D01* +X151161976Y-78443761D02* +X151209595Y-78396142D01* +X151209595Y-78396142D02* +X151257214Y-78300904D01* +X151257214Y-78300904D02* +X151257214Y-78062809D01* +X151257214Y-78062809D02* +X151209595Y-77967571D01* +X151209595Y-77967571D02* +X151161976Y-77919952D01* +X151161976Y-77919952D02* +X151066738Y-77872333D01* +X151066738Y-77872333D02* +X150876262Y-77872333D01* +X150876262Y-77872333D02* +X150781024Y-77919952D01* +X150781024Y-77919952D02* +X150733405Y-77967571D01* +X150733405Y-77967571D02* +X150685786Y-78062809D01* +%TO.C,C15*% +X168013142Y-64680142D02* +X167965523Y-64727761D01* +X167965523Y-64727761D02* +X167822666Y-64775380D01* +X167822666Y-64775380D02* +X167727428Y-64775380D01* +X167727428Y-64775380D02* +X167584571Y-64727761D01* +X167584571Y-64727761D02* +X167489333Y-64632523D01* +X167489333Y-64632523D02* +X167441714Y-64537285D01* +X167441714Y-64537285D02* +X167394095Y-64346809D01* +X167394095Y-64346809D02* +X167394095Y-64203952D01* +X167394095Y-64203952D02* +X167441714Y-64013476D01* +X167441714Y-64013476D02* +X167489333Y-63918238D01* +X167489333Y-63918238D02* +X167584571Y-63823000D01* +X167584571Y-63823000D02* +X167727428Y-63775380D01* +X167727428Y-63775380D02* +X167822666Y-63775380D01* +X167822666Y-63775380D02* +X167965523Y-63823000D01* +X167965523Y-63823000D02* +X168013142Y-63870619D01* +X168965523Y-64775380D02* +X168394095Y-64775380D01* +X168679809Y-64775380D02* +X168679809Y-63775380D01* +X168679809Y-63775380D02* +X168584571Y-63918238D01* +X168584571Y-63918238D02* +X168489333Y-64013476D01* +X168489333Y-64013476D02* +X168394095Y-64061095D01* +X169870285Y-63775380D02* +X169394095Y-63775380D01* +X169394095Y-63775380D02* +X169346476Y-64251571D01* +X169346476Y-64251571D02* +X169394095Y-64203952D01* +X169394095Y-64203952D02* +X169489333Y-64156333D01* +X169489333Y-64156333D02* +X169727428Y-64156333D01* +X169727428Y-64156333D02* +X169822666Y-64203952D01* +X169822666Y-64203952D02* +X169870285Y-64251571D01* +X169870285Y-64251571D02* +X169917904Y-64346809D01* +X169917904Y-64346809D02* +X169917904Y-64584904D01* +X169917904Y-64584904D02* +X169870285Y-64680142D01* +X169870285Y-64680142D02* +X169822666Y-64727761D01* +X169822666Y-64727761D02* +X169727428Y-64775380D01* +X169727428Y-64775380D02* +X169489333Y-64775380D01* +X169489333Y-64775380D02* +X169394095Y-64727761D01* +X169394095Y-64727761D02* +X169346476Y-64680142D01* +%TO.C,C11*% +X161816142Y-84227857D02* +X161863761Y-84275476D01* +X161863761Y-84275476D02* +X161911380Y-84418333D01* +X161911380Y-84418333D02* +X161911380Y-84513571D01* +X161911380Y-84513571D02* +X161863761Y-84656428D01* +X161863761Y-84656428D02* +X161768523Y-84751666D01* +X161768523Y-84751666D02* +X161673285Y-84799285D01* +X161673285Y-84799285D02* +X161482809Y-84846904D01* +X161482809Y-84846904D02* +X161339952Y-84846904D01* +X161339952Y-84846904D02* +X161149476Y-84799285D01* +X161149476Y-84799285D02* +X161054238Y-84751666D01* +X161054238Y-84751666D02* +X160959000Y-84656428D01* +X160959000Y-84656428D02* +X160911380Y-84513571D01* +X160911380Y-84513571D02* +X160911380Y-84418333D01* +X160911380Y-84418333D02* +X160959000Y-84275476D01* +X160959000Y-84275476D02* +X161006619Y-84227857D01* +X161911380Y-83275476D02* +X161911380Y-83846904D01* +X161911380Y-83561190D02* +X160911380Y-83561190D01* +X160911380Y-83561190D02* +X161054238Y-83656428D01* +X161054238Y-83656428D02* +X161149476Y-83751666D01* +X161149476Y-83751666D02* +X161197095Y-83846904D01* +X161911380Y-82323095D02* +X161911380Y-82894523D01* +X161911380Y-82608809D02* +X160911380Y-82608809D01* +X160911380Y-82608809D02* +X161054238Y-82704047D01* +X161054238Y-82704047D02* +X161149476Y-82799285D01* +X161149476Y-82799285D02* +X161197095Y-82894523D01* +%TO.C,C17*% +X168140142Y-62013142D02* +X168092523Y-62060761D01* +X168092523Y-62060761D02* +X167949666Y-62108380D01* +X167949666Y-62108380D02* +X167854428Y-62108380D01* +X167854428Y-62108380D02* +X167711571Y-62060761D01* +X167711571Y-62060761D02* +X167616333Y-61965523D01* +X167616333Y-61965523D02* +X167568714Y-61870285D01* +X167568714Y-61870285D02* +X167521095Y-61679809D01* +X167521095Y-61679809D02* +X167521095Y-61536952D01* +X167521095Y-61536952D02* +X167568714Y-61346476D01* +X167568714Y-61346476D02* +X167616333Y-61251238D01* +X167616333Y-61251238D02* +X167711571Y-61156000D01* +X167711571Y-61156000D02* +X167854428Y-61108380D01* +X167854428Y-61108380D02* +X167949666Y-61108380D01* +X167949666Y-61108380D02* +X168092523Y-61156000D01* +X168092523Y-61156000D02* +X168140142Y-61203619D01* +X169092523Y-62108380D02* +X168521095Y-62108380D01* +X168806809Y-62108380D02* +X168806809Y-61108380D01* +X168806809Y-61108380D02* +X168711571Y-61251238D01* +X168711571Y-61251238D02* +X168616333Y-61346476D01* +X168616333Y-61346476D02* +X168521095Y-61394095D01* +X169425857Y-61108380D02* +X170092523Y-61108380D01* +X170092523Y-61108380D02* +X169663952Y-62108380D01* +%TO.C,D3*% +X165250905Y-83190380D02* +X165250905Y-82190380D01* +X165250905Y-82190380D02* +X165489000Y-82190380D01* +X165489000Y-82190380D02* +X165631857Y-82238000D01* +X165631857Y-82238000D02* +X165727095Y-82333238D01* +X165727095Y-82333238D02* +X165774714Y-82428476D01* +X165774714Y-82428476D02* +X165822333Y-82618952D01* +X165822333Y-82618952D02* +X165822333Y-82761809D01* +X165822333Y-82761809D02* +X165774714Y-82952285D01* +X165774714Y-82952285D02* +X165727095Y-83047523D01* +X165727095Y-83047523D02* +X165631857Y-83142761D01* +X165631857Y-83142761D02* +X165489000Y-83190380D01* +X165489000Y-83190380D02* +X165250905Y-83190380D01* +X166155667Y-82190380D02* +X166774714Y-82190380D01* +X166774714Y-82190380D02* +X166441381Y-82571333D01* +X166441381Y-82571333D02* +X166584238Y-82571333D01* +X166584238Y-82571333D02* +X166679476Y-82618952D01* +X166679476Y-82618952D02* +X166727095Y-82666571D01* +X166727095Y-82666571D02* +X166774714Y-82761809D01* +X166774714Y-82761809D02* +X166774714Y-82999904D01* +X166774714Y-82999904D02* +X166727095Y-83095142D01* +X166727095Y-83095142D02* +X166679476Y-83142761D01* +X166679476Y-83142761D02* +X166584238Y-83190380D01* +X166584238Y-83190380D02* +X166298524Y-83190380D01* +X166298524Y-83190380D02* +X166203286Y-83142761D01* +X166203286Y-83142761D02* +X166155667Y-83095142D01* +%TO.C,R9*% +X158837333Y-61092380D02* +X158504000Y-60616190D01* +X158265905Y-61092380D02* +X158265905Y-60092380D01* +X158265905Y-60092380D02* +X158646857Y-60092380D01* +X158646857Y-60092380D02* +X158742095Y-60140000D01* +X158742095Y-60140000D02* +X158789714Y-60187619D01* +X158789714Y-60187619D02* +X158837333Y-60282857D01* +X158837333Y-60282857D02* +X158837333Y-60425714D01* +X158837333Y-60425714D02* +X158789714Y-60520952D01* +X158789714Y-60520952D02* +X158742095Y-60568571D01* +X158742095Y-60568571D02* +X158646857Y-60616190D01* +X158646857Y-60616190D02* +X158265905Y-60616190D01* +X159313524Y-61092380D02* +X159504000Y-61092380D01* +X159504000Y-61092380D02* +X159599238Y-61044761D01* +X159599238Y-61044761D02* +X159646857Y-60997142D01* +X159646857Y-60997142D02* +X159742095Y-60854285D01* +X159742095Y-60854285D02* +X159789714Y-60663809D01* +X159789714Y-60663809D02* +X159789714Y-60282857D01* +X159789714Y-60282857D02* +X159742095Y-60187619D01* +X159742095Y-60187619D02* +X159694476Y-60140000D01* +X159694476Y-60140000D02* +X159599238Y-60092380D01* +X159599238Y-60092380D02* +X159408762Y-60092380D01* +X159408762Y-60092380D02* +X159313524Y-60140000D01* +X159313524Y-60140000D02* +X159265905Y-60187619D01* +X159265905Y-60187619D02* +X159218286Y-60282857D01* +X159218286Y-60282857D02* +X159218286Y-60520952D01* +X159218286Y-60520952D02* +X159265905Y-60616190D01* +X159265905Y-60616190D02* +X159313524Y-60663809D01* +X159313524Y-60663809D02* +X159408762Y-60711428D01* +X159408762Y-60711428D02* +X159599238Y-60711428D01* +X159599238Y-60711428D02* +X159694476Y-60663809D01* +X159694476Y-60663809D02* +X159742095Y-60616190D01* +X159742095Y-60616190D02* +X159789714Y-60520952D01* +%TO.C,R3*% +X164933333Y-118604380D02* +X164600000Y-118128190D01* +X164361905Y-118604380D02* +X164361905Y-117604380D01* +X164361905Y-117604380D02* +X164742857Y-117604380D01* +X164742857Y-117604380D02* +X164838095Y-117652000D01* +X164838095Y-117652000D02* +X164885714Y-117699619D01* +X164885714Y-117699619D02* +X164933333Y-117794857D01* +X164933333Y-117794857D02* +X164933333Y-117937714D01* +X164933333Y-117937714D02* +X164885714Y-118032952D01* +X164885714Y-118032952D02* +X164838095Y-118080571D01* +X164838095Y-118080571D02* +X164742857Y-118128190D01* +X164742857Y-118128190D02* +X164361905Y-118128190D01* +X165266667Y-117604380D02* +X165885714Y-117604380D01* +X165885714Y-117604380D02* +X165552381Y-117985333D01* +X165552381Y-117985333D02* +X165695238Y-117985333D01* +X165695238Y-117985333D02* +X165790476Y-118032952D01* +X165790476Y-118032952D02* +X165838095Y-118080571D01* +X165838095Y-118080571D02* +X165885714Y-118175809D01* +X165885714Y-118175809D02* +X165885714Y-118413904D01* +X165885714Y-118413904D02* +X165838095Y-118509142D01* +X165838095Y-118509142D02* +X165790476Y-118556761D01* +X165790476Y-118556761D02* +X165695238Y-118604380D01* +X165695238Y-118604380D02* +X165409524Y-118604380D01* +X165409524Y-118604380D02* +X165314286Y-118556761D01* +X165314286Y-118556761D02* +X165266667Y-118509142D01* +%TO.C,R11*% +X147312142Y-71360380D02* +X146978809Y-70884190D01* +X146740714Y-71360380D02* +X146740714Y-70360380D01* +X146740714Y-70360380D02* +X147121666Y-70360380D01* +X147121666Y-70360380D02* +X147216904Y-70408000D01* +X147216904Y-70408000D02* +X147264523Y-70455619D01* +X147264523Y-70455619D02* +X147312142Y-70550857D01* +X147312142Y-70550857D02* +X147312142Y-70693714D01* +X147312142Y-70693714D02* +X147264523Y-70788952D01* +X147264523Y-70788952D02* +X147216904Y-70836571D01* +X147216904Y-70836571D02* +X147121666Y-70884190D01* +X147121666Y-70884190D02* +X146740714Y-70884190D01* +X148264523Y-71360380D02* +X147693095Y-71360380D01* +X147978809Y-71360380D02* +X147978809Y-70360380D01* +X147978809Y-70360380D02* +X147883571Y-70503238D01* +X147883571Y-70503238D02* +X147788333Y-70598476D01* +X147788333Y-70598476D02* +X147693095Y-70646095D01* +X149216904Y-71360380D02* +X148645476Y-71360380D01* +X148931190Y-71360380D02* +X148931190Y-70360380D01* +X148931190Y-70360380D02* +X148835952Y-70503238D01* +X148835952Y-70503238D02* +X148740714Y-70598476D01* +X148740714Y-70598476D02* +X148645476Y-70646095D01* +%TO.C,R7*% +X147915333Y-73138380D02* +X147582000Y-72662190D01* +X147343905Y-73138380D02* +X147343905Y-72138380D01* +X147343905Y-72138380D02* +X147724857Y-72138380D01* +X147724857Y-72138380D02* +X147820095Y-72186000D01* +X147820095Y-72186000D02* +X147867714Y-72233619D01* +X147867714Y-72233619D02* +X147915333Y-72328857D01* +X147915333Y-72328857D02* +X147915333Y-72471714D01* +X147915333Y-72471714D02* +X147867714Y-72566952D01* +X147867714Y-72566952D02* +X147820095Y-72614571D01* +X147820095Y-72614571D02* +X147724857Y-72662190D01* +X147724857Y-72662190D02* +X147343905Y-72662190D01* +X148248667Y-72138380D02* +X148915333Y-72138380D01* +X148915333Y-72138380D02* +X148486762Y-73138380D01* +%TO.C,C10*% +X153789142Y-73551142D02* +X153741523Y-73598761D01* +X153741523Y-73598761D02* +X153598666Y-73646380D01* +X153598666Y-73646380D02* +X153503428Y-73646380D01* +X153503428Y-73646380D02* +X153360571Y-73598761D01* +X153360571Y-73598761D02* +X153265333Y-73503523D01* +X153265333Y-73503523D02* +X153217714Y-73408285D01* +X153217714Y-73408285D02* +X153170095Y-73217809D01* +X153170095Y-73217809D02* +X153170095Y-73074952D01* +X153170095Y-73074952D02* +X153217714Y-72884476D01* +X153217714Y-72884476D02* +X153265333Y-72789238D01* +X153265333Y-72789238D02* +X153360571Y-72694000D01* +X153360571Y-72694000D02* +X153503428Y-72646380D01* +X153503428Y-72646380D02* +X153598666Y-72646380D01* +X153598666Y-72646380D02* +X153741523Y-72694000D01* +X153741523Y-72694000D02* +X153789142Y-72741619D01* +X154741523Y-73646380D02* +X154170095Y-73646380D01* +X154455809Y-73646380D02* +X154455809Y-72646380D01* +X154455809Y-72646380D02* +X154360571Y-72789238D01* +X154360571Y-72789238D02* +X154265333Y-72884476D01* +X154265333Y-72884476D02* +X154170095Y-72932095D01* +X155360571Y-72646380D02* +X155455809Y-72646380D01* +X155455809Y-72646380D02* +X155551047Y-72694000D01* +X155551047Y-72694000D02* +X155598666Y-72741619D01* +X155598666Y-72741619D02* +X155646285Y-72836857D01* +X155646285Y-72836857D02* +X155693904Y-73027333D01* +X155693904Y-73027333D02* +X155693904Y-73265428D01* +X155693904Y-73265428D02* +X155646285Y-73455904D01* +X155646285Y-73455904D02* +X155598666Y-73551142D01* +X155598666Y-73551142D02* +X155551047Y-73598761D01* +X155551047Y-73598761D02* +X155455809Y-73646380D01* +X155455809Y-73646380D02* +X155360571Y-73646380D01* +X155360571Y-73646380D02* +X155265333Y-73598761D01* +X155265333Y-73598761D02* +X155217714Y-73551142D01* +X155217714Y-73551142D02* +X155170095Y-73455904D01* +X155170095Y-73455904D02* +X155122476Y-73265428D01* +X155122476Y-73265428D02* +X155122476Y-73027333D01* +X155122476Y-73027333D02* +X155170095Y-72836857D01* +X155170095Y-72836857D02* +X155217714Y-72741619D01* +X155217714Y-72741619D02* +X155265333Y-72694000D01* +X155265333Y-72694000D02* +X155360571Y-72646380D01* +%TO.C,R4*% +X164933333Y-120890380D02* +X164600000Y-120414190D01* +X164361905Y-120890380D02* +X164361905Y-119890380D01* +X164361905Y-119890380D02* +X164742857Y-119890380D01* +X164742857Y-119890380D02* +X164838095Y-119938000D01* +X164838095Y-119938000D02* +X164885714Y-119985619D01* +X164885714Y-119985619D02* +X164933333Y-120080857D01* +X164933333Y-120080857D02* +X164933333Y-120223714D01* +X164933333Y-120223714D02* +X164885714Y-120318952D01* +X164885714Y-120318952D02* +X164838095Y-120366571D01* +X164838095Y-120366571D02* +X164742857Y-120414190D01* +X164742857Y-120414190D02* +X164361905Y-120414190D01* +X165790476Y-120223714D02* +X165790476Y-120890380D01* +X165552381Y-119842761D02* +X165314286Y-120557047D01* +X165314286Y-120557047D02* +X165933333Y-120557047D01* +%TO.C,C1*% +X162416833Y-112413142D02* +X162369214Y-112460761D01* +X162369214Y-112460761D02* +X162226357Y-112508380D01* +X162226357Y-112508380D02* +X162131119Y-112508380D01* +X162131119Y-112508380D02* +X161988262Y-112460761D01* +X161988262Y-112460761D02* +X161893024Y-112365523D01* +X161893024Y-112365523D02* +X161845405Y-112270285D01* +X161845405Y-112270285D02* +X161797786Y-112079809D01* +X161797786Y-112079809D02* +X161797786Y-111936952D01* +X161797786Y-111936952D02* +X161845405Y-111746476D01* +X161845405Y-111746476D02* +X161893024Y-111651238D01* +X161893024Y-111651238D02* +X161988262Y-111556000D01* +X161988262Y-111556000D02* +X162131119Y-111508380D01* +X162131119Y-111508380D02* +X162226357Y-111508380D01* +X162226357Y-111508380D02* +X162369214Y-111556000D01* +X162369214Y-111556000D02* +X162416833Y-111603619D01* +X163369214Y-112508380D02* +X162797786Y-112508380D01* +X163083500Y-112508380D02* +X163083500Y-111508380D01* +X163083500Y-111508380D02* +X162988262Y-111651238D01* +X162988262Y-111651238D02* +X162893024Y-111746476D01* +X162893024Y-111746476D02* +X162797786Y-111794095D01* +%TO.C,C13*% +X164457742Y-84238057D02* +X164505361Y-84285676D01* +X164505361Y-84285676D02* +X164552980Y-84428533D01* +X164552980Y-84428533D02* +X164552980Y-84523771D01* +X164552980Y-84523771D02* +X164505361Y-84666628D01* +X164505361Y-84666628D02* +X164410123Y-84761866D01* +X164410123Y-84761866D02* +X164314885Y-84809485D01* +X164314885Y-84809485D02* +X164124409Y-84857104D01* +X164124409Y-84857104D02* +X163981552Y-84857104D01* +X163981552Y-84857104D02* +X163791076Y-84809485D01* +X163791076Y-84809485D02* +X163695838Y-84761866D01* +X163695838Y-84761866D02* +X163600600Y-84666628D01* +X163600600Y-84666628D02* +X163552980Y-84523771D01* +X163552980Y-84523771D02* +X163552980Y-84428533D01* +X163552980Y-84428533D02* +X163600600Y-84285676D01* +X163600600Y-84285676D02* +X163648219Y-84238057D01* +X164552980Y-83285676D02* +X164552980Y-83857104D01* +X164552980Y-83571390D02* +X163552980Y-83571390D01* +X163552980Y-83571390D02* +X163695838Y-83666628D01* +X163695838Y-83666628D02* +X163791076Y-83761866D01* +X163791076Y-83761866D02* +X163838695Y-83857104D01* +X163552980Y-82952342D02* +X163552980Y-82333295D01* +X163552980Y-82333295D02* +X163933933Y-82666628D01* +X163933933Y-82666628D02* +X163933933Y-82523771D01* +X163933933Y-82523771D02* +X163981552Y-82428533D01* +X163981552Y-82428533D02* +X164029171Y-82380914D01* +X164029171Y-82380914D02* +X164124409Y-82333295D01* +X164124409Y-82333295D02* +X164362504Y-82333295D01* +X164362504Y-82333295D02* +X164457742Y-82380914D01* +X164457742Y-82380914D02* +X164505361Y-82428533D01* +X164505361Y-82428533D02* +X164552980Y-82523771D01* +X164552980Y-82523771D02* +X164552980Y-82809485D01* +X164552980Y-82809485D02* +X164505361Y-82904723D01* +X164505361Y-82904723D02* +X164457742Y-82952342D01* +%TO.C,C19*% +X145965942Y-58692142D02* +X145918323Y-58739761D01* +X145918323Y-58739761D02* +X145775466Y-58787380D01* +X145775466Y-58787380D02* +X145680228Y-58787380D01* +X145680228Y-58787380D02* +X145537371Y-58739761D01* +X145537371Y-58739761D02* +X145442133Y-58644523D01* +X145442133Y-58644523D02* +X145394514Y-58549285D01* +X145394514Y-58549285D02* +X145346895Y-58358809D01* +X145346895Y-58358809D02* +X145346895Y-58215952D01* +X145346895Y-58215952D02* +X145394514Y-58025476D01* +X145394514Y-58025476D02* +X145442133Y-57930238D01* +X145442133Y-57930238D02* +X145537371Y-57835000D01* +X145537371Y-57835000D02* +X145680228Y-57787380D01* +X145680228Y-57787380D02* +X145775466Y-57787380D01* +X145775466Y-57787380D02* +X145918323Y-57835000D01* +X145918323Y-57835000D02* +X145965942Y-57882619D01* +X146918323Y-58787380D02* +X146346895Y-58787380D01* +X146632609Y-58787380D02* +X146632609Y-57787380D01* +X146632609Y-57787380D02* +X146537371Y-57930238D01* +X146537371Y-57930238D02* +X146442133Y-58025476D01* +X146442133Y-58025476D02* +X146346895Y-58073095D01* +X147394514Y-58787380D02* +X147584990Y-58787380D01* +X147584990Y-58787380D02* +X147680228Y-58739761D01* +X147680228Y-58739761D02* +X147727847Y-58692142D01* +X147727847Y-58692142D02* +X147823085Y-58549285D01* +X147823085Y-58549285D02* +X147870704Y-58358809D01* +X147870704Y-58358809D02* +X147870704Y-57977857D01* +X147870704Y-57977857D02* +X147823085Y-57882619D01* +X147823085Y-57882619D02* +X147775466Y-57835000D01* +X147775466Y-57835000D02* +X147680228Y-57787380D01* +X147680228Y-57787380D02* +X147489752Y-57787380D01* +X147489752Y-57787380D02* +X147394514Y-57835000D01* +X147394514Y-57835000D02* +X147346895Y-57882619D01* +X147346895Y-57882619D02* +X147299276Y-57977857D01* +X147299276Y-57977857D02* +X147299276Y-58215952D01* +X147299276Y-58215952D02* +X147346895Y-58311190D01* +X147346895Y-58311190D02* +X147394514Y-58358809D01* +X147394514Y-58358809D02* +X147489752Y-58406428D01* +X147489752Y-58406428D02* +X147680228Y-58406428D01* +X147680228Y-58406428D02* +X147775466Y-58358809D01* +X147775466Y-58358809D02* +X147823085Y-58311190D01* +X147823085Y-58311190D02* +X147870704Y-58215952D01* +%TO.C,C7*% +X144359333Y-89045142D02* +X144311714Y-89092761D01* +X144311714Y-89092761D02* +X144168857Y-89140380D01* +X144168857Y-89140380D02* +X144073619Y-89140380D01* +X144073619Y-89140380D02* +X143930762Y-89092761D01* +X143930762Y-89092761D02* +X143835524Y-88997523D01* +X143835524Y-88997523D02* +X143787905Y-88902285D01* +X143787905Y-88902285D02* +X143740286Y-88711809D01* +X143740286Y-88711809D02* +X143740286Y-88568952D01* +X143740286Y-88568952D02* +X143787905Y-88378476D01* +X143787905Y-88378476D02* +X143835524Y-88283238D01* +X143835524Y-88283238D02* +X143930762Y-88188000D01* +X143930762Y-88188000D02* +X144073619Y-88140380D01* +X144073619Y-88140380D02* +X144168857Y-88140380D01* +X144168857Y-88140380D02* +X144311714Y-88188000D01* +X144311714Y-88188000D02* +X144359333Y-88235619D01* +X144692667Y-88140380D02* +X145359333Y-88140380D01* +X145359333Y-88140380D02* +X144930762Y-89140380D01* +%TO.C,R1*% +X159599333Y-120763380D02* +X159266000Y-120287190D01* +X159027905Y-120763380D02* +X159027905Y-119763380D01* +X159027905Y-119763380D02* +X159408857Y-119763380D01* +X159408857Y-119763380D02* +X159504095Y-119811000D01* +X159504095Y-119811000D02* +X159551714Y-119858619D01* +X159551714Y-119858619D02* +X159599333Y-119953857D01* +X159599333Y-119953857D02* +X159599333Y-120096714D01* +X159599333Y-120096714D02* +X159551714Y-120191952D01* +X159551714Y-120191952D02* +X159504095Y-120239571D01* +X159504095Y-120239571D02* +X159408857Y-120287190D01* +X159408857Y-120287190D02* +X159027905Y-120287190D01* +X160551714Y-120763380D02* +X159980286Y-120763380D01* +X160266000Y-120763380D02* +X160266000Y-119763380D01* +X160266000Y-119763380D02* +X160170762Y-119906238D01* +X160170762Y-119906238D02* +X160075524Y-120001476D01* +X160075524Y-120001476D02* +X159980286Y-120049095D01* +%TO.C,D7*% +X167536905Y-63505380D02* +X167536905Y-62505380D01* +X167536905Y-62505380D02* +X167775000Y-62505380D01* +X167775000Y-62505380D02* +X167917857Y-62553000D01* +X167917857Y-62553000D02* +X168013095Y-62648238D01* +X168013095Y-62648238D02* +X168060714Y-62743476D01* +X168060714Y-62743476D02* +X168108333Y-62933952D01* +X168108333Y-62933952D02* +X168108333Y-63076809D01* +X168108333Y-63076809D02* +X168060714Y-63267285D01* +X168060714Y-63267285D02* +X168013095Y-63362523D01* +X168013095Y-63362523D02* +X167917857Y-63457761D01* +X167917857Y-63457761D02* +X167775000Y-63505380D01* +X167775000Y-63505380D02* +X167536905Y-63505380D01* +X168441667Y-62505380D02* +X169108333Y-62505380D01* +X169108333Y-62505380D02* +X168679762Y-63505380D01* +%TO.C,C9*% +X155789333Y-80936142D02* +X155741714Y-80983761D01* +X155741714Y-80983761D02* +X155598857Y-81031380D01* +X155598857Y-81031380D02* +X155503619Y-81031380D01* +X155503619Y-81031380D02* +X155360762Y-80983761D01* +X155360762Y-80983761D02* +X155265524Y-80888523D01* +X155265524Y-80888523D02* +X155217905Y-80793285D01* +X155217905Y-80793285D02* +X155170286Y-80602809D01* +X155170286Y-80602809D02* +X155170286Y-80459952D01* +X155170286Y-80459952D02* +X155217905Y-80269476D01* +X155217905Y-80269476D02* +X155265524Y-80174238D01* +X155265524Y-80174238D02* +X155360762Y-80079000D01* +X155360762Y-80079000D02* +X155503619Y-80031380D01* +X155503619Y-80031380D02* +X155598857Y-80031380D01* +X155598857Y-80031380D02* +X155741714Y-80079000D01* +X155741714Y-80079000D02* +X155789333Y-80126619D01* +X156265524Y-81031380D02* +X156456000Y-81031380D01* +X156456000Y-81031380D02* +X156551238Y-80983761D01* +X156551238Y-80983761D02* +X156598857Y-80936142D01* +X156598857Y-80936142D02* +X156694095Y-80793285D01* +X156694095Y-80793285D02* +X156741714Y-80602809D01* +X156741714Y-80602809D02* +X156741714Y-80221857D01* +X156741714Y-80221857D02* +X156694095Y-80126619D01* +X156694095Y-80126619D02* +X156646476Y-80079000D01* +X156646476Y-80079000D02* +X156551238Y-80031380D01* +X156551238Y-80031380D02* +X156360762Y-80031380D01* +X156360762Y-80031380D02* +X156265524Y-80079000D01* +X156265524Y-80079000D02* +X156217905Y-80126619D01* +X156217905Y-80126619D02* +X156170286Y-80221857D01* +X156170286Y-80221857D02* +X156170286Y-80459952D01* +X156170286Y-80459952D02* +X156217905Y-80555190D01* +X156217905Y-80555190D02* +X156265524Y-80602809D01* +X156265524Y-80602809D02* +X156360762Y-80650428D01* +X156360762Y-80650428D02* +X156551238Y-80650428D01* +X156551238Y-80650428D02* +X156646476Y-80602809D01* +X156646476Y-80602809D02* +X156694095Y-80555190D01* +X156694095Y-80555190D02* +X156741714Y-80459952D01* +%TO.C,D2*% +X157861405Y-84151380D02* +X157861405Y-83151380D01* +X157861405Y-83151380D02* +X158099500Y-83151380D01* +X158099500Y-83151380D02* +X158242357Y-83199000D01* +X158242357Y-83199000D02* +X158337595Y-83294238D01* +X158337595Y-83294238D02* +X158385214Y-83389476D01* +X158385214Y-83389476D02* +X158432833Y-83579952D01* +X158432833Y-83579952D02* +X158432833Y-83722809D01* +X158432833Y-83722809D02* +X158385214Y-83913285D01* +X158385214Y-83913285D02* +X158337595Y-84008523D01* +X158337595Y-84008523D02* +X158242357Y-84103761D01* +X158242357Y-84103761D02* +X158099500Y-84151380D01* +X158099500Y-84151380D02* +X157861405Y-84151380D01* +X158813786Y-83246619D02* +X158861405Y-83199000D01* +X158861405Y-83199000D02* +X158956643Y-83151380D01* +X158956643Y-83151380D02* +X159194738Y-83151380D01* +X159194738Y-83151380D02* +X159289976Y-83199000D01* +X159289976Y-83199000D02* +X159337595Y-83246619D01* +X159337595Y-83246619D02* +X159385214Y-83341857D01* +X159385214Y-83341857D02* +X159385214Y-83437095D01* +X159385214Y-83437095D02* +X159337595Y-83579952D01* +X159337595Y-83579952D02* +X158766167Y-84151380D01* +X158766167Y-84151380D02* +X159385214Y-84151380D01* +%TO.C,R13*% +X154932142Y-58533380D02* +X154598809Y-58057190D01* +X154360714Y-58533380D02* +X154360714Y-57533380D01* +X154360714Y-57533380D02* +X154741666Y-57533380D01* +X154741666Y-57533380D02* +X154836904Y-57581000D01* +X154836904Y-57581000D02* +X154884523Y-57628619D01* +X154884523Y-57628619D02* +X154932142Y-57723857D01* +X154932142Y-57723857D02* +X154932142Y-57866714D01* +X154932142Y-57866714D02* +X154884523Y-57961952D01* +X154884523Y-57961952D02* +X154836904Y-58009571D01* +X154836904Y-58009571D02* +X154741666Y-58057190D01* +X154741666Y-58057190D02* +X154360714Y-58057190D01* +X155884523Y-58533380D02* +X155313095Y-58533380D01* +X155598809Y-58533380D02* +X155598809Y-57533380D01* +X155598809Y-57533380D02* +X155503571Y-57676238D01* +X155503571Y-57676238D02* +X155408333Y-57771476D01* +X155408333Y-57771476D02* +X155313095Y-57819095D01* +X156217857Y-57533380D02* +X156836904Y-57533380D01* +X156836904Y-57533380D02* +X156503571Y-57914333D01* +X156503571Y-57914333D02* +X156646428Y-57914333D01* +X156646428Y-57914333D02* +X156741666Y-57961952D01* +X156741666Y-57961952D02* +X156789285Y-58009571D01* +X156789285Y-58009571D02* +X156836904Y-58104809D01* +X156836904Y-58104809D02* +X156836904Y-58342904D01* +X156836904Y-58342904D02* +X156789285Y-58438142D01* +X156789285Y-58438142D02* +X156741666Y-58485761D01* +X156741666Y-58485761D02* +X156646428Y-58533380D01* +X156646428Y-58533380D02* +X156360714Y-58533380D01* +X156360714Y-58533380D02* +X156265476Y-58485761D01* +X156265476Y-58485761D02* +X156217857Y-58438142D01* +%TO.C,R8*% +X154646333Y-77075380D02* +X154313000Y-76599190D01* +X154074905Y-77075380D02* +X154074905Y-76075380D01* +X154074905Y-76075380D02* +X154455857Y-76075380D01* +X154455857Y-76075380D02* +X154551095Y-76123000D01* +X154551095Y-76123000D02* +X154598714Y-76170619D01* +X154598714Y-76170619D02* +X154646333Y-76265857D01* +X154646333Y-76265857D02* +X154646333Y-76408714D01* +X154646333Y-76408714D02* +X154598714Y-76503952D01* +X154598714Y-76503952D02* +X154551095Y-76551571D01* +X154551095Y-76551571D02* +X154455857Y-76599190D01* +X154455857Y-76599190D02* +X154074905Y-76599190D01* +X155217762Y-76503952D02* +X155122524Y-76456333D01* +X155122524Y-76456333D02* +X155074905Y-76408714D01* +X155074905Y-76408714D02* +X155027286Y-76313476D01* +X155027286Y-76313476D02* +X155027286Y-76265857D01* +X155027286Y-76265857D02* +X155074905Y-76170619D01* +X155074905Y-76170619D02* +X155122524Y-76123000D01* +X155122524Y-76123000D02* +X155217762Y-76075380D01* +X155217762Y-76075380D02* +X155408238Y-76075380D01* +X155408238Y-76075380D02* +X155503476Y-76123000D01* +X155503476Y-76123000D02* +X155551095Y-76170619D01* +X155551095Y-76170619D02* +X155598714Y-76265857D01* +X155598714Y-76265857D02* +X155598714Y-76313476D01* +X155598714Y-76313476D02* +X155551095Y-76408714D01* +X155551095Y-76408714D02* +X155503476Y-76456333D01* +X155503476Y-76456333D02* +X155408238Y-76503952D01* +X155408238Y-76503952D02* +X155217762Y-76503952D01* +X155217762Y-76503952D02* +X155122524Y-76551571D01* +X155122524Y-76551571D02* +X155074905Y-76599190D01* +X155074905Y-76599190D02* +X155027286Y-76694428D01* +X155027286Y-76694428D02* +X155027286Y-76884904D01* +X155027286Y-76884904D02* +X155074905Y-76980142D01* +X155074905Y-76980142D02* +X155122524Y-77027761D01* +X155122524Y-77027761D02* +X155217762Y-77075380D01* +X155217762Y-77075380D02* +X155408238Y-77075380D01* +X155408238Y-77075380D02* +X155503476Y-77027761D01* +X155503476Y-77027761D02* +X155551095Y-76980142D01* +X155551095Y-76980142D02* +X155598714Y-76884904D01* +X155598714Y-76884904D02* +X155598714Y-76694428D01* +X155598714Y-76694428D02* +X155551095Y-76599190D01* +X155551095Y-76599190D02* +X155503476Y-76551571D01* +X155503476Y-76551571D02* +X155408238Y-76503952D01* +%TO.C,D4*% +X167409905Y-80269380D02* +X167409905Y-79269380D01* +X167409905Y-79269380D02* +X167648000Y-79269380D01* +X167648000Y-79269380D02* +X167790857Y-79317000D01* +X167790857Y-79317000D02* +X167886095Y-79412238D01* +X167886095Y-79412238D02* +X167933714Y-79507476D01* +X167933714Y-79507476D02* +X167981333Y-79697952D01* +X167981333Y-79697952D02* +X167981333Y-79840809D01* +X167981333Y-79840809D02* +X167933714Y-80031285D01* +X167933714Y-80031285D02* +X167886095Y-80126523D01* +X167886095Y-80126523D02* +X167790857Y-80221761D01* +X167790857Y-80221761D02* +X167648000Y-80269380D01* +X167648000Y-80269380D02* +X167409905Y-80269380D01* +X168838476Y-79602714D02* +X168838476Y-80269380D01* +X168600381Y-79221761D02* +X168362286Y-79936047D01* +X168362286Y-79936047D02* +X168981333Y-79936047D01* +%TO.C,C18*% +X165600142Y-59473142D02* +X165552523Y-59520761D01* +X165552523Y-59520761D02* +X165409666Y-59568380D01* +X165409666Y-59568380D02* +X165314428Y-59568380D01* +X165314428Y-59568380D02* +X165171571Y-59520761D01* +X165171571Y-59520761D02* +X165076333Y-59425523D01* +X165076333Y-59425523D02* +X165028714Y-59330285D01* +X165028714Y-59330285D02* +X164981095Y-59139809D01* +X164981095Y-59139809D02* +X164981095Y-58996952D01* +X164981095Y-58996952D02* +X165028714Y-58806476D01* +X165028714Y-58806476D02* +X165076333Y-58711238D01* +X165076333Y-58711238D02* +X165171571Y-58616000D01* +X165171571Y-58616000D02* +X165314428Y-58568380D01* +X165314428Y-58568380D02* +X165409666Y-58568380D01* +X165409666Y-58568380D02* +X165552523Y-58616000D01* +X165552523Y-58616000D02* +X165600142Y-58663619D01* +X166552523Y-59568380D02* +X165981095Y-59568380D01* +X166266809Y-59568380D02* +X166266809Y-58568380D01* +X166266809Y-58568380D02* +X166171571Y-58711238D01* +X166171571Y-58711238D02* +X166076333Y-58806476D01* +X166076333Y-58806476D02* +X165981095Y-58854095D01* +X167123952Y-58996952D02* +X167028714Y-58949333D01* +X167028714Y-58949333D02* +X166981095Y-58901714D01* +X166981095Y-58901714D02* +X166933476Y-58806476D01* +X166933476Y-58806476D02* +X166933476Y-58758857D01* +X166933476Y-58758857D02* +X166981095Y-58663619D01* +X166981095Y-58663619D02* +X167028714Y-58616000D01* +X167028714Y-58616000D02* +X167123952Y-58568380D01* +X167123952Y-58568380D02* +X167314428Y-58568380D01* +X167314428Y-58568380D02* +X167409666Y-58616000D01* +X167409666Y-58616000D02* +X167457285Y-58663619D01* +X167457285Y-58663619D02* +X167504904Y-58758857D01* +X167504904Y-58758857D02* +X167504904Y-58806476D01* +X167504904Y-58806476D02* +X167457285Y-58901714D01* +X167457285Y-58901714D02* +X167409666Y-58949333D01* +X167409666Y-58949333D02* +X167314428Y-58996952D01* +X167314428Y-58996952D02* +X167123952Y-58996952D01* +X167123952Y-58996952D02* +X167028714Y-59044571D01* +X167028714Y-59044571D02* +X166981095Y-59092190D01* +X166981095Y-59092190D02* +X166933476Y-59187428D01* +X166933476Y-59187428D02* +X166933476Y-59377904D01* +X166933476Y-59377904D02* +X166981095Y-59473142D01* +X166981095Y-59473142D02* +X167028714Y-59520761D01* +X167028714Y-59520761D02* +X167123952Y-59568380D01* +X167123952Y-59568380D02* +X167314428Y-59568380D01* +X167314428Y-59568380D02* +X167409666Y-59520761D01* +X167409666Y-59520761D02* +X167457285Y-59473142D01* +X167457285Y-59473142D02* +X167504904Y-59377904D01* +X167504904Y-59377904D02* +X167504904Y-59187428D01* +X167504904Y-59187428D02* +X167457285Y-59092190D01* +X167457285Y-59092190D02* +X167409666Y-59044571D01* +X167409666Y-59044571D02* +X167314428Y-58996952D01* +%TO.C,D6*% +X168116905Y-67442380D02* +X168116905Y-66442380D01* +X168116905Y-66442380D02* +X168355000Y-66442380D01* +X168355000Y-66442380D02* +X168497857Y-66490000D01* +X168497857Y-66490000D02* +X168593095Y-66585238D01* +X168593095Y-66585238D02* +X168640714Y-66680476D01* +X168640714Y-66680476D02* +X168688333Y-66870952D01* +X168688333Y-66870952D02* +X168688333Y-67013809D01* +X168688333Y-67013809D02* +X168640714Y-67204285D01* +X168640714Y-67204285D02* +X168593095Y-67299523D01* +X168593095Y-67299523D02* +X168497857Y-67394761D01* +X168497857Y-67394761D02* +X168355000Y-67442380D01* +X168355000Y-67442380D02* +X168116905Y-67442380D01* +X169545476Y-66442380D02* +X169355000Y-66442380D01* +X169355000Y-66442380D02* +X169259762Y-66490000D01* +X169259762Y-66490000D02* +X169212143Y-66537619D01* +X169212143Y-66537619D02* +X169116905Y-66680476D01* +X169116905Y-66680476D02* +X169069286Y-66870952D01* +X169069286Y-66870952D02* +X169069286Y-67251904D01* +X169069286Y-67251904D02* +X169116905Y-67347142D01* +X169116905Y-67347142D02* +X169164524Y-67394761D01* +X169164524Y-67394761D02* +X169259762Y-67442380D01* +X169259762Y-67442380D02* +X169450238Y-67442380D01* +X169450238Y-67442380D02* +X169545476Y-67394761D01* +X169545476Y-67394761D02* +X169593095Y-67347142D01* +X169593095Y-67347142D02* +X169640714Y-67251904D01* +X169640714Y-67251904D02* +X169640714Y-67013809D01* +X169640714Y-67013809D02* +X169593095Y-66918571D01* +X169593095Y-66918571D02* +X169545476Y-66870952D01* +X169545476Y-66870952D02* +X169450238Y-66823333D01* +X169450238Y-66823333D02* +X169259762Y-66823333D01* +X169259762Y-66823333D02* +X169164524Y-66870952D01* +X169164524Y-66870952D02* +X169116905Y-66918571D01* +X169116905Y-66918571D02* +X169069286Y-67013809D01* +%TO.C,C4*% +X163917333Y-92728142D02* +X163869714Y-92775761D01* +X163869714Y-92775761D02* +X163726857Y-92823380D01* +X163726857Y-92823380D02* +X163631619Y-92823380D01* +X163631619Y-92823380D02* +X163488762Y-92775761D01* +X163488762Y-92775761D02* +X163393524Y-92680523D01* +X163393524Y-92680523D02* +X163345905Y-92585285D01* +X163345905Y-92585285D02* +X163298286Y-92394809D01* +X163298286Y-92394809D02* +X163298286Y-92251952D01* +X163298286Y-92251952D02* +X163345905Y-92061476D01* +X163345905Y-92061476D02* +X163393524Y-91966238D01* +X163393524Y-91966238D02* +X163488762Y-91871000D01* +X163488762Y-91871000D02* +X163631619Y-91823380D01* +X163631619Y-91823380D02* +X163726857Y-91823380D01* +X163726857Y-91823380D02* +X163869714Y-91871000D01* +X163869714Y-91871000D02* +X163917333Y-91918619D01* +X164774476Y-92156714D02* +X164774476Y-92823380D01* +X164536381Y-91775761D02* +X164298286Y-92490047D01* +X164298286Y-92490047D02* +X164917333Y-92490047D01* +%TO.C,C14*% +X168394142Y-71411142D02* +X168346523Y-71458761D01* +X168346523Y-71458761D02* +X168203666Y-71506380D01* +X168203666Y-71506380D02* +X168108428Y-71506380D01* +X168108428Y-71506380D02* +X167965571Y-71458761D01* +X167965571Y-71458761D02* +X167870333Y-71363523D01* +X167870333Y-71363523D02* +X167822714Y-71268285D01* +X167822714Y-71268285D02* +X167775095Y-71077809D01* +X167775095Y-71077809D02* +X167775095Y-70934952D01* +X167775095Y-70934952D02* +X167822714Y-70744476D01* +X167822714Y-70744476D02* +X167870333Y-70649238D01* +X167870333Y-70649238D02* +X167965571Y-70554000D01* +X167965571Y-70554000D02* +X168108428Y-70506380D01* +X168108428Y-70506380D02* +X168203666Y-70506380D01* +X168203666Y-70506380D02* +X168346523Y-70554000D01* +X168346523Y-70554000D02* +X168394142Y-70601619D01* +X169346523Y-71506380D02* +X168775095Y-71506380D01* +X169060809Y-71506380D02* +X169060809Y-70506380D01* +X169060809Y-70506380D02* +X168965571Y-70649238D01* +X168965571Y-70649238D02* +X168870333Y-70744476D01* +X168870333Y-70744476D02* +X168775095Y-70792095D01* +X170203666Y-70839714D02* +X170203666Y-71506380D01* +X169965571Y-70458761D02* +X169727476Y-71173047D01* +X169727476Y-71173047D02* +X170346523Y-71173047D01* +%TO.C,D5*% +X167788605Y-75351980D02* +X167788605Y-74351980D01* +X167788605Y-74351980D02* +X168026700Y-74351980D01* +X168026700Y-74351980D02* +X168169557Y-74399600D01* +X168169557Y-74399600D02* +X168264795Y-74494838D01* +X168264795Y-74494838D02* +X168312414Y-74590076D01* +X168312414Y-74590076D02* +X168360033Y-74780552D01* +X168360033Y-74780552D02* +X168360033Y-74923409D01* +X168360033Y-74923409D02* +X168312414Y-75113885D01* +X168312414Y-75113885D02* +X168264795Y-75209123D01* +X168264795Y-75209123D02* +X168169557Y-75304361D01* +X168169557Y-75304361D02* +X168026700Y-75351980D01* +X168026700Y-75351980D02* +X167788605Y-75351980D01* +X169264795Y-74351980D02* +X168788605Y-74351980D01* +X168788605Y-74351980D02* +X168740986Y-74828171D01* +X168740986Y-74828171D02* +X168788605Y-74780552D01* +X168788605Y-74780552D02* +X168883843Y-74732933D01* +X168883843Y-74732933D02* +X169121938Y-74732933D01* +X169121938Y-74732933D02* +X169217176Y-74780552D01* +X169217176Y-74780552D02* +X169264795Y-74828171D01* +X169264795Y-74828171D02* +X169312414Y-74923409D01* +X169312414Y-74923409D02* +X169312414Y-75161504D01* +X169312414Y-75161504D02* +X169264795Y-75256742D01* +X169264795Y-75256742D02* +X169217176Y-75304361D01* +X169217176Y-75304361D02* +X169121938Y-75351980D01* +X169121938Y-75351980D02* +X168883843Y-75351980D01* +X168883843Y-75351980D02* +X168788605Y-75304361D01* +X168788605Y-75304361D02* +X168740986Y-75256742D01* +%TO.C,C6*% +X147661333Y-81298142D02* +X147613714Y-81345761D01* +X147613714Y-81345761D02* +X147470857Y-81393380D01* +X147470857Y-81393380D02* +X147375619Y-81393380D01* +X147375619Y-81393380D02* +X147232762Y-81345761D01* +X147232762Y-81345761D02* +X147137524Y-81250523D01* +X147137524Y-81250523D02* +X147089905Y-81155285D01* +X147089905Y-81155285D02* +X147042286Y-80964809D01* +X147042286Y-80964809D02* +X147042286Y-80821952D01* +X147042286Y-80821952D02* +X147089905Y-80631476D01* +X147089905Y-80631476D02* +X147137524Y-80536238D01* +X147137524Y-80536238D02* +X147232762Y-80441000D01* +X147232762Y-80441000D02* +X147375619Y-80393380D01* +X147375619Y-80393380D02* +X147470857Y-80393380D01* +X147470857Y-80393380D02* +X147613714Y-80441000D01* +X147613714Y-80441000D02* +X147661333Y-80488619D01* +X148518476Y-80393380D02* +X148328000Y-80393380D01* +X148328000Y-80393380D02* +X148232762Y-80441000D01* +X148232762Y-80441000D02* +X148185143Y-80488619D01* +X148185143Y-80488619D02* +X148089905Y-80631476D01* +X148089905Y-80631476D02* +X148042286Y-80821952D01* +X148042286Y-80821952D02* +X148042286Y-81202904D01* +X148042286Y-81202904D02* +X148089905Y-81298142D01* +X148089905Y-81298142D02* +X148137524Y-81345761D01* +X148137524Y-81345761D02* +X148232762Y-81393380D01* +X148232762Y-81393380D02* +X148423238Y-81393380D01* +X148423238Y-81393380D02* +X148518476Y-81345761D01* +X148518476Y-81345761D02* +X148566095Y-81298142D01* +X148566095Y-81298142D02* +X148613714Y-81202904D01* +X148613714Y-81202904D02* +X148613714Y-80964809D01* +X148613714Y-80964809D02* +X148566095Y-80869571D01* +X148566095Y-80869571D02* +X148518476Y-80821952D01* +X148518476Y-80821952D02* +X148423238Y-80774333D01* +X148423238Y-80774333D02* +X148232762Y-80774333D01* +X148232762Y-80774333D02* +X148137524Y-80821952D01* +X148137524Y-80821952D02* +X148089905Y-80869571D01* +X148089905Y-80869571D02* +X148042286Y-80964809D01* +%TO.C,C2*% +X141692333Y-114953142D02* +X141644714Y-115000761D01* +X141644714Y-115000761D02* +X141501857Y-115048380D01* +X141501857Y-115048380D02* +X141406619Y-115048380D01* +X141406619Y-115048380D02* +X141263762Y-115000761D01* +X141263762Y-115000761D02* +X141168524Y-114905523D01* +X141168524Y-114905523D02* +X141120905Y-114810285D01* +X141120905Y-114810285D02* +X141073286Y-114619809D01* +X141073286Y-114619809D02* +X141073286Y-114476952D01* +X141073286Y-114476952D02* +X141120905Y-114286476D01* +X141120905Y-114286476D02* +X141168524Y-114191238D01* +X141168524Y-114191238D02* +X141263762Y-114096000D01* +X141263762Y-114096000D02* +X141406619Y-114048380D01* +X141406619Y-114048380D02* +X141501857Y-114048380D01* +X141501857Y-114048380D02* +X141644714Y-114096000D01* +X141644714Y-114096000D02* +X141692333Y-114143619D01* +X142073286Y-114143619D02* +X142120905Y-114096000D01* +X142120905Y-114096000D02* +X142216143Y-114048380D01* +X142216143Y-114048380D02* +X142454238Y-114048380D01* +X142454238Y-114048380D02* +X142549476Y-114096000D01* +X142549476Y-114096000D02* +X142597095Y-114143619D01* +X142597095Y-114143619D02* +X142644714Y-114238857D01* +X142644714Y-114238857D02* +X142644714Y-114334095D01* +X142644714Y-114334095D02* +X142597095Y-114476952D01* +X142597095Y-114476952D02* +X142025667Y-115048380D01* +X142025667Y-115048380D02* +X142644714Y-115048380D01* +%TO.C,C5*% +X143089333Y-106046142D02* +X143041714Y-106093761D01* +X143041714Y-106093761D02* +X142898857Y-106141380D01* +X142898857Y-106141380D02* +X142803619Y-106141380D01* +X142803619Y-106141380D02* +X142660762Y-106093761D01* +X142660762Y-106093761D02* +X142565524Y-105998523D01* +X142565524Y-105998523D02* +X142517905Y-105903285D01* +X142517905Y-105903285D02* +X142470286Y-105712809D01* +X142470286Y-105712809D02* +X142470286Y-105569952D01* +X142470286Y-105569952D02* +X142517905Y-105379476D01* +X142517905Y-105379476D02* +X142565524Y-105284238D01* +X142565524Y-105284238D02* +X142660762Y-105189000D01* +X142660762Y-105189000D02* +X142803619Y-105141380D01* +X142803619Y-105141380D02* +X142898857Y-105141380D01* +X142898857Y-105141380D02* +X143041714Y-105189000D01* +X143041714Y-105189000D02* +X143089333Y-105236619D01* +X143994095Y-105141380D02* +X143517905Y-105141380D01* +X143517905Y-105141380D02* +X143470286Y-105617571D01* +X143470286Y-105617571D02* +X143517905Y-105569952D01* +X143517905Y-105569952D02* +X143613143Y-105522333D01* +X143613143Y-105522333D02* +X143851238Y-105522333D01* +X143851238Y-105522333D02* +X143946476Y-105569952D01* +X143946476Y-105569952D02* +X143994095Y-105617571D01* +X143994095Y-105617571D02* +X144041714Y-105712809D01* +X144041714Y-105712809D02* +X144041714Y-105950904D01* +X144041714Y-105950904D02* +X143994095Y-106046142D01* +X143994095Y-106046142D02* +X143946476Y-106093761D01* +X143946476Y-106093761D02* +X143851238Y-106141380D01* +X143851238Y-106141380D02* +X143613143Y-106141380D01* +X143613143Y-106141380D02* +X143517905Y-106093761D01* +X143517905Y-106093761D02* +X143470286Y-106046142D01* +%TO.C,U1*% +X152146095Y-65680380D02* +X152146095Y-66489904D01* +X152146095Y-66489904D02* +X152193714Y-66585142D01* +X152193714Y-66585142D02* +X152241333Y-66632761D01* +X152241333Y-66632761D02* +X152336571Y-66680380D01* +X152336571Y-66680380D02* +X152527047Y-66680380D01* +X152527047Y-66680380D02* +X152622285Y-66632761D01* +X152622285Y-66632761D02* +X152669904Y-66585142D01* +X152669904Y-66585142D02* +X152717523Y-66489904D01* +X152717523Y-66489904D02* +X152717523Y-65680380D01* +X153717523Y-66680380D02* +X153146095Y-66680380D01* +X153431809Y-66680380D02* +X153431809Y-65680380D01* +X153431809Y-65680380D02* +X153336571Y-65823238D01* +X153336571Y-65823238D02* +X153241333Y-65918476D01* +X153241333Y-65918476D02* +X153146095Y-65966095D01* +%TO.C,kibuzzard-64153C31*% +G36* +X150275131Y-53505100D02* +G01* +X150313231Y-53599556D01* +X150272750Y-53693219D01* +X150174325Y-53734494D01* +X150079075Y-53692425D01* +X150041769Y-53599556D01* +X150078281Y-53505894D01* +X150175913Y-53463031D01* +X150275131Y-53505100D01* +G37* +G36* +X153804144Y-53503512D02* +G01* +X153840656Y-53597175D01* +X153802556Y-53689250D01* +X153706513Y-53731319D01* +X153608088Y-53690044D01* +X153567606Y-53597175D01* +X153605706Y-53502719D01* +X153705719Y-53459856D01* +X153804144Y-53503512D01* +G37* +G36* +X149312313Y-53512244D02* +G01* +X149349619Y-53608288D01* +X149310725Y-53702744D01* +X149213094Y-53745606D01* +X149113081Y-53703537D01* +X149071806Y-53609081D01* +X149110700Y-53512244D01* +X149212300Y-53467794D01* +X149312313Y-53512244D01* +G37* +G36* +X152868313Y-53512244D02* +G01* +X152905619Y-53608288D01* +X152866725Y-53702744D01* +X152769094Y-53745606D01* +X152669081Y-53703537D01* +X152627806Y-53609081D01* +X152666700Y-53512244D01* +X152768300Y-53467794D01* +X152868313Y-53512244D01* +G37* +G36* +X147841692Y-53165573D02* +G01* +X147939125Y-53230462D01* +X148006395Y-53327498D01* +X148028819Y-53445569D01* +X148005800Y-53563242D01* +X147936744Y-53659087D01* +X147839113Y-53722786D01* +X147730369Y-53744019D01* +X147576381Y-53744019D01* +X147576381Y-53143944D01* +X147728781Y-53143944D01* +X147841692Y-53165573D01* +G37* +G36* +X153708894Y-54719273D02* +G01* +X153068338Y-54719273D01* +X151786431Y-54719273D01* +X151381619Y-54719273D01* +X149900481Y-54719273D01* +X149512338Y-54719273D01* +X148551106Y-54719273D01* +X147725606Y-54719273D01* +X147295394Y-54719273D01* +X147163102Y-54719273D01* +X147052806Y-54713854D01* +X146943572Y-54697651D01* +X146836453Y-54670819D01* +X146732479Y-54633617D01* +X146632652Y-54586402D01* +X146537934Y-54529630D01* +X146449237Y-54463848D01* +X146367414Y-54389688D01* +X146293254Y-54307866D01* +X146253013Y-54253606D01* +X149763956Y-54253606D01* +X149766338Y-54307581D01* +X149780625Y-54347269D01* +X149821900Y-54379019D01* +X149900481Y-54388544D01* +X149978269Y-54379019D01* +X150018750Y-54346475D01* +X150033038Y-54305994D01* +X150035419Y-54252019D01* +X150035419Y-53931344D01* +X150112016Y-53986113D01* +X150224331Y-54004369D01* +X150309439Y-53990787D01* +X150391195Y-53950041D01* +X150464101Y-53886894D01* +X150687881Y-53886894D01* +X150690263Y-53942456D01* +X150703756Y-53983731D01* +X150745428Y-54015878D01* +X150825994Y-54026594D01* +X150907353Y-54016275D01* +X150948231Y-53985319D01* +X150963313Y-53943250D01* +X150965694Y-53888481D01* +X150965694Y-53580506D01* +X151014906Y-53503512D01* +X151114125Y-53469381D01* +X151206994Y-53505894D01* +X151243506Y-53607494D01* +X151243506Y-53885306D01* +X151245888Y-53942456D01* +X151260969Y-53985319D01* +X151303038Y-54016275D01* +X151381619Y-54026594D01* +X151462978Y-54016275D01* +X151503856Y-53985319D01* +X151518938Y-53943250D01* +X151519456Y-53931344D01* +X151648319Y-53931344D01* +X151676894Y-53999606D01* +X151786431Y-54026594D01* +X151867394Y-54016275D01* +X151910256Y-53985319D01* +X151925338Y-53943250D01* +X151927719Y-53888481D01* +X151927719Y-53606700D01* +X152349994Y-53606700D01* +X152363047Y-53712798D01* +X152402205Y-53809900D01* +X152467469Y-53898006D01* +X152547990Y-53967680D01* +X152632922Y-54009484D01* +X152722263Y-54023419D01* +X152839936Y-54002384D01* +X152918319Y-53939281D01* +X152952450Y-54001987D01* +X153068338Y-54023419D01* +X153138783Y-54013100D01* +X153177081Y-53982144D01* +X153190575Y-53940075D01* +X153192956Y-53885306D01* +X153192956Y-53596381D01* +X153296144Y-53596381D01* +X153308932Y-53699833D01* +X153347297Y-53794290D01* +X153411238Y-53879750D01* +X153489819Y-53947219D01* +X153572104Y-53987700D01* +X153658094Y-54001194D01* +X153771997Y-53981350D01* +X153850181Y-53921819D01* +X153850181Y-53969444D01* +X153812081Y-54083744D01* +X153713656Y-54131369D01* +X153627931Y-54116684D01* +X153548556Y-54072631D01* +X153502519Y-54053581D01* +X153463625Y-54066281D01* +X153416794Y-54112319D01* +X153369169Y-54221856D01* +X153396553Y-54272259D01* +X153478706Y-54328219D01* +X153591022Y-54372272D01* +X153708894Y-54386956D01* +X153811199Y-54374521D01* +X153906449Y-54337215D01* +X153994644Y-54275038D01* +X154065199Y-54192576D01* +X154107533Y-54094415D01* +X154121644Y-53980556D01* +X154121644Y-53886894D01* +X154248644Y-53886894D01* +X154251025Y-53942456D01* +X154264519Y-53983731D01* +X154306191Y-54015878D01* +X154386756Y-54026594D01* +X154467719Y-54016275D01* +X154510581Y-53985319D01* +X154525663Y-53943250D01* +X154528044Y-53888481D01* +X154528044Y-53607494D01* +X154551856Y-53503909D01* +X154623294Y-53469381D01* +X154697113Y-53503909D01* +X154721719Y-53607494D01* +X154721719Y-53885306D01* +X154724100Y-53940075D01* +X154737594Y-53982144D01* +X154779266Y-54015481D01* +X154859831Y-54026594D01* +X154941588Y-54015878D01* +X154983656Y-53983731D01* +X154998738Y-53942456D01* +X155001119Y-53886894D01* +X155001119Y-53609081D01* +X155020963Y-53505894D01* +X155096369Y-53469381D01* +X155170188Y-53503909D01* +X155194794Y-53607494D01* +X155194794Y-53885306D01* +X155197175Y-53940075D01* +X155210669Y-53982144D01* +X155252341Y-54015481D01* +X155332906Y-54026594D01* +X155414266Y-54015878D01* +X155455144Y-53983731D01* +X155470225Y-53941663D01* +X155472606Y-53886894D01* +X155472606Y-53609081D01* +X155463081Y-53472997D01* +X155434506Y-53365312D01* +X155386881Y-53286025D01* +X155290838Y-53212802D01* +X155174156Y-53188394D01* +X155063031Y-53219350D01* +X154984450Y-53276500D01* +X154942381Y-53326506D01* +X154880292Y-53249777D01* +X154799859Y-53203740D01* +X154701081Y-53188394D01* +X154603847Y-53216572D01* +X154521694Y-53301106D01* +X154494706Y-53218556D01* +X154378819Y-53189981D01* +X154306191Y-53200697D01* +X154266106Y-53232844D01* +X154251025Y-53273325D01* +X154248644Y-53328094D01* +X154248644Y-53886894D01* +X154121644Y-53886894D01* +X154121644Y-53323331D01* +X154119263Y-53269356D01* +X154104975Y-53228875D01* +X154064494Y-53196331D01* +X153974006Y-53186806D01* +X153884313Y-53209825D01* +X153851769Y-53277294D01* +X153825575Y-53246337D01* +X153764456Y-53209825D01* +X153666031Y-53189981D01* +X153576426Y-53203563D01* +X153491759Y-53244309D01* +X153412031Y-53312219D01* +X153347649Y-53398120D01* +X153309020Y-53492841D01* +X153296144Y-53596381D01* +X153192956Y-53596381D01* +X153192956Y-53329681D01* +X153190575Y-53274912D01* +X153176288Y-53232844D01* +X153134219Y-53199506D01* +X153042144Y-53189981D01* +X152952847Y-53212206D01* +X152916731Y-53278881D01* +X152888156Y-53246337D01* +X152826244Y-53210619D01* +X152727819Y-53191569D01* +X152636185Y-53205415D01* +X152549666Y-53246955D01* +X152468263Y-53316187D01* +X152402558Y-53403853D01* +X152363135Y-53500690D01* +X152349994Y-53606700D01* +X151927719Y-53606700D01* +X151927719Y-53555106D01* +X151965025Y-53482081D01* +X152045194Y-53451919D01* +X152114250Y-53464619D01* +X152169019Y-53477319D01* +X152256331Y-53416994D01* +X152286494Y-53305869D01* +X152266650Y-53232050D01* +X152216644Y-53199506D01* +X152161081Y-53186012D01* +X152098375Y-53182044D01* +X152011856Y-53209031D01* +X151947563Y-53251894D01* +X151924544Y-53278881D01* +X151907081Y-53226494D01* +X151865409Y-53199109D01* +X151788019Y-53189981D01* +X151706263Y-53200697D01* +X151664194Y-53232844D01* +X151650700Y-53273325D01* +X151648319Y-53328094D01* +X151648319Y-53885306D01* +X151648319Y-53931344D01* +X151519456Y-53931344D01* +X151521319Y-53888481D01* +X151521319Y-53609081D01* +X151509589Y-53498662D01* +X151474399Y-53400237D01* +X151415750Y-53313806D01* +X151339462Y-53246778D01* +X151251356Y-53206562D01* +X151151431Y-53193156D01* +X151051816Y-53217366D01* +X150965694Y-53289994D01* +X150965694Y-52939156D01* +X150963313Y-52884387D01* +X150948231Y-52842319D01* +X150907750Y-52810172D01* +X150827581Y-52799456D01* +X150745825Y-52810172D01* +X150703756Y-52842319D01* +X150690263Y-52882800D01* +X150687881Y-52937569D01* +X150687881Y-53886894D01* +X150464101Y-53886894D01* +X150469600Y-53882131D01* +X150533541Y-53796230D01* +X150571906Y-53701509D01* +X150584694Y-53597969D01* +X150571817Y-53494428D01* +X150533188Y-53399708D01* +X150468806Y-53313806D01* +X150390049Y-53245897D01* +X150308292Y-53205151D01* +X150223538Y-53191569D01* +X150111420Y-53212206D01* +X150033831Y-53274119D01* +X149999700Y-53211412D01* +X149886194Y-53189981D01* +X149817534Y-53200697D01* +X149779831Y-53232844D01* +X149766338Y-53272531D01* +X149763956Y-53326506D01* +X149763956Y-54253606D01* +X146253013Y-54253606D01* +X146227472Y-54219168D01* +X146170700Y-54124450D01* +X146123486Y-54024623D01* +X146086283Y-53920649D01* +X146077032Y-53883719D01* +X147295394Y-53883719D01* +X147314444Y-53985319D01* +X147356513Y-54015084D01* +X147435094Y-54025006D01* +X147725606Y-54025006D01* +X147842536Y-54014191D01* +X147950436Y-53981747D01* +X148049308Y-53927673D01* +X148097703Y-53886894D01* +X148412994Y-53886894D01* +X148415375Y-53942456D01* +X148428869Y-53983731D01* +X148470541Y-54015878D01* +X148551106Y-54026594D01* +X148632466Y-54016275D01* +X148673344Y-53985319D01* +X148688425Y-53943250D01* +X148690806Y-53888481D01* +X148690806Y-53606700D01* +X148793994Y-53606700D01* +X148807047Y-53712798D01* +X148846205Y-53809900D01* +X148911469Y-53898006D01* +X148991990Y-53967680D01* +X149076922Y-54009484D01* +X149166263Y-54023419D01* +X149283936Y-54002384D01* +X149362319Y-53939281D01* +X149396450Y-54001987D01* +X149512338Y-54023419D01* +X149582783Y-54013100D01* +X149621081Y-53982144D01* +X149634575Y-53940075D01* +X149636956Y-53885306D01* +X149636956Y-53329681D01* +X149634575Y-53274912D01* +X149620288Y-53232844D01* +X149578219Y-53199506D01* +X149486144Y-53189981D01* +X149396847Y-53212206D01* +X149360731Y-53278881D01* +X149332156Y-53246337D01* +X149270244Y-53210619D01* +X149171819Y-53191569D01* +X149080185Y-53205415D01* +X148993666Y-53246955D01* +X148912263Y-53316187D01* +X148846558Y-53403853D01* +X148807135Y-53500690D01* +X148793994Y-53606700D01* +X148690806Y-53606700D01* +X148690806Y-53332856D01* +X148689219Y-53286819D01* +X148660644Y-53218556D01* +X148552694Y-53191569D01* +X148551900Y-53191669D01* +X148470938Y-53201887D01* +X148428869Y-53232844D01* +X148415375Y-53274912D01* +X148412994Y-53329681D01* +X148412994Y-53886894D01* +X148097703Y-53886894D01* +X148139150Y-53851969D01* +X148213812Y-53761134D01* +X148267142Y-53661667D01* +X148299140Y-53553568D01* +X148309806Y-53436837D01* +X148298892Y-53320553D01* +X148266150Y-53213794D01* +X148211580Y-53116559D01* +X148135181Y-53028850D01* +X148044396Y-52956271D01* +X148009139Y-52937569D01* +X148412994Y-52937569D01* +X148415375Y-52992337D01* +X148429663Y-53034406D01* +X148471731Y-53067744D01* +X148551900Y-53077269D01* +X148632069Y-53067744D01* +X148674138Y-53035200D01* +X148688425Y-52993925D01* +X148690806Y-52939156D01* +X148688425Y-52884387D01* +X148673344Y-52842319D01* +X148632863Y-52810172D01* +X148552694Y-52799456D01* +X148470938Y-52810172D01* +X148428869Y-52842319D01* +X148415375Y-52882800D01* +X148412994Y-52937569D01* +X148009139Y-52937569D01* +X147946666Y-52904430D01* +X147841990Y-52873325D01* +X147730369Y-52862956D01* +X147436681Y-52861369D01* +X147354925Y-52872084D01* +X147312856Y-52904231D01* +X147297775Y-52945506D01* +X147295394Y-53001069D01* +X147295394Y-53883719D01* +X146077032Y-53883719D01* +X146059451Y-53813530D01* +X146043248Y-53704296D01* +X146037829Y-53594000D01* +X146043248Y-53483704D01* +X146059451Y-53374470D01* +X146086283Y-53267351D01* +X146123486Y-53163377D01* +X146170700Y-53063550D01* +X146227472Y-52968832D01* +X146293254Y-52880134D01* +X146367414Y-52798312D01* +X146449237Y-52724152D01* +X146537934Y-52658370D01* +X146632652Y-52601598D01* +X146732479Y-52554383D01* +X146836453Y-52517181D01* +X146943572Y-52490349D01* +X147052806Y-52474146D01* +X147163102Y-52468727D01* +X147295394Y-52468727D01* +X155472606Y-52468727D01* +X155604898Y-52468727D01* +X155715194Y-52474146D01* +X155824428Y-52490349D01* +X155931547Y-52517181D01* +X156035521Y-52554383D01* +X156135348Y-52601598D01* +X156230066Y-52658370D01* +X156318763Y-52724152D01* +X156400586Y-52798312D01* +X156474746Y-52880134D01* +X156540528Y-52968832D01* +X156597300Y-53063550D01* +X156644514Y-53163377D01* +X156681717Y-53267351D01* +X156708549Y-53374470D01* +X156724752Y-53483704D01* +X156730171Y-53594000D01* +X156724752Y-53704296D01* +X156708549Y-53813530D01* +X156681717Y-53920649D01* +X156644514Y-54024623D01* +X156597300Y-54124450D01* +X156540528Y-54219168D01* +X156474746Y-54307866D01* +X156400586Y-54389688D01* +X156318763Y-54463848D01* +X156230066Y-54529630D01* +X156135348Y-54586402D01* +X156035521Y-54633617D01* +X155931547Y-54670819D01* +X155824428Y-54697651D01* +X155715194Y-54713854D01* +X155604898Y-54719273D01* +X155472606Y-54719273D01* +X155332906Y-54719273D01* +X153708894Y-54719273D01* +G37* +%TO.C,kibuzzard-64153C1C*% +G36* +X139916694Y-59551094D02* +G01* +X139916694Y-59751119D01* +X139827000Y-59700319D01* +X139784931Y-59597925D01* +X139807156Y-59518550D01* +X139865894Y-59490769D01* +X139916694Y-59551094D01* +G37* +G36* +X140054806Y-62615763D02* +G01* +X140096081Y-62714188D01* +X140054013Y-62809438D01* +X139961144Y-62846744D01* +X139867481Y-62810231D01* +X139824619Y-62712600D01* +X139866687Y-62613381D01* +X139961144Y-62575281D01* +X140054806Y-62615763D01* +G37* +G36* +X140064331Y-61188600D02* +G01* +X140107194Y-61286231D01* +X140065125Y-61386244D01* +X139970669Y-61427519D01* +X139873831Y-61388625D01* +X139829381Y-61287025D01* +X139873831Y-61187013D01* +X139969875Y-61149706D01* +X140064331Y-61188600D01* +G37* +G36* +X140064331Y-65249425D02* +G01* +X140107194Y-65347056D01* +X140065125Y-65447069D01* +X139970669Y-65488344D01* +X139873831Y-65449450D01* +X139829381Y-65347850D01* +X139873831Y-65247838D01* +X139969875Y-65210531D01* +X140064331Y-65249425D01* +G37* +G36* +X140078619Y-66151522D02* +G01* +X140105606Y-66226531D01* +X140105606Y-66486881D01* +X139503944Y-66486881D01* +X139503944Y-66264631D01* +X139519819Y-66186050D01* +X139575381Y-66159856D01* +X139632531Y-66164619D01* +X139665869Y-66240819D01* +X139688094Y-66338450D01* +X139779375Y-66367819D01* +X139870656Y-66339244D01* +X139892881Y-66253519D01* +X139905581Y-66164619D01* +X139937331Y-66135250D01* +X139997656Y-66126519D01* +X140078619Y-66151522D01* +G37* +G36* +X141080860Y-59595544D02* +G01* +X141080860Y-60292456D01* +X141080860Y-60986988D01* +X141080860Y-61870431D01* +X141080860Y-62988031D01* +X141080860Y-63356331D01* +X141080860Y-64388206D01* +X141080860Y-65047813D01* +X141080860Y-66210656D01* +X141080860Y-66767869D01* +X141080860Y-66900160D01* +X141075434Y-67010612D01* +X141059208Y-67120000D01* +X141032338Y-67227271D01* +X140995083Y-67331391D01* +X140947802Y-67431359D01* +X140890950Y-67526211D01* +X140825075Y-67615033D01* +X140750811Y-67696971D01* +X140668873Y-67771235D01* +X140580050Y-67837111D01* +X140485198Y-67893963D01* +X140385231Y-67941244D01* +X140281110Y-67978499D01* +X140173840Y-68005369D01* +X140064452Y-68021595D01* +X139954000Y-68027021D01* +X139843548Y-68021595D01* +X139734160Y-68005369D01* +X139626890Y-67978499D01* +X139522769Y-67941244D01* +X139422802Y-67893963D01* +X139327950Y-67837111D01* +X139239127Y-67771235D01* +X139157189Y-67696971D01* +X139082925Y-67615033D01* +X139017050Y-67526211D01* +X138960198Y-67431359D01* +X138912917Y-67331391D01* +X138875662Y-67227271D01* +X138848792Y-67120000D01* +X138832566Y-67010612D01* +X138827140Y-66900160D01* +X138827140Y-66767869D01* +X138827140Y-66626581D01* +X139222956Y-66626581D01* +X139233672Y-66708338D01* +X139265819Y-66750406D01* +X139307094Y-66765488D01* +X139362656Y-66767869D01* +X140243719Y-66767869D01* +X140326269Y-66758344D01* +X140371512Y-66716275D01* +X140386594Y-66628169D01* +X140386594Y-66210656D01* +X140374688Y-66115142D01* +X140338969Y-66029681D01* +X140279438Y-65954275D01* +X140202267Y-65895273D01* +X140113632Y-65859025D01* +X140013531Y-65845531D01* +X139924455Y-65855938D01* +X139841376Y-65887159D01* +X139764294Y-65939194D01* +X139672616Y-65893950D01* +X139572206Y-65878869D01* +X139480484Y-65890334D01* +X139397934Y-65924730D01* +X139324556Y-65982056D01* +X139268112Y-66052965D01* +X139234245Y-66134456D01* +X139222956Y-66226531D01* +X139222956Y-66626581D01* +X138827140Y-66626581D01* +X138827140Y-65074006D01* +X139551569Y-65074006D01* +X139573794Y-65163303D01* +X139640469Y-65199419D01* +X139607925Y-65227994D01* +X139572206Y-65289906D01* +X139553156Y-65388331D01* +X139567003Y-65479965D01* +X139608542Y-65566484D01* +X139677775Y-65647888D01* +X139765440Y-65713592D01* +X139862278Y-65753015D01* +X139968288Y-65766156D01* +X140074385Y-65753103D01* +X140171488Y-65713945D01* +X140259594Y-65648681D01* +X140329267Y-65568160D01* +X140371072Y-65483228D01* +X140385006Y-65393888D01* +X140363972Y-65276214D01* +X140300869Y-65197831D01* +X140363575Y-65163700D01* +X140385006Y-65047813D01* +X140374688Y-64977367D01* +X140343731Y-64939069D01* +X140301663Y-64925575D01* +X140246894Y-64923194D01* +X139691269Y-64923194D01* +X139636500Y-64925575D01* +X139594431Y-64939863D01* +X139561094Y-64981931D01* +X139551569Y-65074006D01* +X138827140Y-65074006D01* +X138827140Y-64391381D01* +X139542044Y-64391381D01* +X139553685Y-64488924D01* +X139588610Y-64582587D01* +X139646819Y-64672369D01* +X139705755Y-64731503D01* +X139780963Y-64778731D01* +X139869069Y-64809688D01* +X139966700Y-64820006D01* +X140064728Y-64809688D01* +X140154025Y-64778731D01* +X140230423Y-64731503D01* +X140289756Y-64672369D01* +X140348847Y-64580117D01* +X140384301Y-64485397D01* +X140396119Y-64388206D01* +X140380244Y-64266763D01* +X140332619Y-64165956D01* +X140278247Y-64100472D01* +X140219906Y-64078644D01* +X140137356Y-64115156D01* +X140074253Y-64178259D01* +X140053219Y-64231044D01* +X140082587Y-64301688D01* +X140111956Y-64395350D01* +X140074650Y-64489806D01* +X139969875Y-64534256D01* +X139864306Y-64488219D01* +X139826206Y-64389000D01* +X139853194Y-64307244D01* +X139888119Y-64221519D01* +X139866291Y-64167941D01* +X139800806Y-64111981D01* +X139709525Y-64078644D01* +X139637294Y-64119919D01* +X139607131Y-64164369D01* +X139591256Y-64189769D01* +X139558712Y-64273906D01* +X139542044Y-64391381D01* +X138827140Y-64391381D01* +X138827140Y-63835756D01* +X139157869Y-63835756D01* +X139168584Y-63917513D01* +X139200731Y-63959581D01* +X139242800Y-63973075D01* +X139297569Y-63975456D01* +X140248481Y-63975456D01* +X140303250Y-63973075D01* +X140345319Y-63959581D01* +X140377466Y-63917909D01* +X140388181Y-63837344D01* +X140377863Y-63755984D01* +X140346906Y-63715106D01* +X140304837Y-63700025D01* +X140250069Y-63697644D01* +X140127831Y-63697644D01* +X140170495Y-63648828D01* +X140234988Y-63581756D01* +X140299083Y-63515478D01* +X140340556Y-63469044D01* +X140351669Y-63453169D01* +X140397706Y-63356331D01* +X140331031Y-63261081D01* +X140227844Y-63211869D01* +X140194506Y-63222188D01* +X140143706Y-63272194D01* +X139969081Y-63483331D01* +X139835731Y-63326169D01* +X139750006Y-63267431D01* +X139649200Y-63319025D01* +X139584906Y-63410306D01* +X139627769Y-63505556D01* +X139640469Y-63524606D01* +X139721431Y-63611125D01* +X139802394Y-63697644D01* +X139299156Y-63697644D01* +X139254706Y-63699231D01* +X139184856Y-63727806D01* +X139157869Y-63835756D01* +X138827140Y-63835756D01* +X138827140Y-63002319D01* +X139551569Y-63002319D01* +X139562284Y-63070978D01* +X139594431Y-63108681D01* +X139634119Y-63122175D01* +X139688094Y-63124556D01* +X140615194Y-63124556D01* +X140669169Y-63122175D01* +X140708856Y-63107888D01* +X140740606Y-63066613D01* +X140750131Y-62988031D01* +X140740606Y-62910244D01* +X140708063Y-62869763D01* +X140667581Y-62855475D01* +X140613606Y-62853094D01* +X140292931Y-62853094D01* +X140347700Y-62776497D01* +X140365956Y-62664181D01* +X140352374Y-62579074D01* +X140311628Y-62497317D01* +X140243719Y-62418913D01* +X140157817Y-62354972D01* +X140063097Y-62316607D01* +X139959556Y-62303819D01* +X139856016Y-62316695D01* +X139761295Y-62355324D01* +X139675394Y-62419706D01* +X139607484Y-62498464D01* +X139566738Y-62580220D01* +X139553156Y-62664975D01* +X139573794Y-62777092D01* +X139635706Y-62854681D01* +X139573000Y-62888813D01* +X139551569Y-63002319D01* +X138827140Y-63002319D01* +X138827140Y-62060931D01* +X139157869Y-62060931D01* +X139168584Y-62142688D01* +X139200731Y-62184756D01* +X139242800Y-62198250D01* +X139297569Y-62200631D01* +X140053219Y-62200631D01* +X140200062Y-62189519D01* +X140300869Y-62156181D01* +X140353653Y-62098238D01* +X140381831Y-61997431D01* +X140388975Y-61870431D01* +X140372306Y-61800581D01* +X140330634Y-61776769D01* +X140250069Y-61768831D01* +X140137356Y-61800581D01* +X140123863Y-61827569D01* +X140121481Y-61871225D01* +X140106400Y-61913294D01* +X140034169Y-61922819D01* +X139299156Y-61922819D01* +X139243594Y-61925200D01* +X139200731Y-61940281D01* +X139168584Y-61982350D01* +X139157869Y-62060931D01* +X138827140Y-62060931D01* +X138827140Y-61013181D01* +X139551569Y-61013181D01* +X139573794Y-61102478D01* +X139640469Y-61138594D01* +X139607925Y-61167169D01* +X139572206Y-61229081D01* +X139553156Y-61327506D01* +X139567003Y-61419140D01* +X139608542Y-61505659D01* +X139677775Y-61587063D01* +X139765440Y-61652767D01* +X139862278Y-61692190D01* +X139968288Y-61705331D01* +X140074385Y-61692278D01* +X140171488Y-61653120D01* +X140259594Y-61587856D01* +X140329267Y-61507335D01* +X140371072Y-61422403D01* +X140385006Y-61333063D01* +X140363972Y-61215389D01* +X140300869Y-61137006D01* +X140363575Y-61102875D01* +X140385006Y-60986988D01* +X140374688Y-60916542D01* +X140343731Y-60878244D01* +X140301663Y-60864750D01* +X140246894Y-60862369D01* +X139691269Y-60862369D01* +X139636500Y-60864750D01* +X139594431Y-60879038D01* +X139561094Y-60921106D01* +X139551569Y-61013181D01* +X138827140Y-61013181D01* +X138827140Y-60489306D01* +X139265819Y-60489306D01* +X139275741Y-60570666D01* +X139305506Y-60611544D01* +X139343606Y-60626625D01* +X139397581Y-60629006D01* +X139561094Y-60629006D01* +X139554744Y-60681394D01* +X139575381Y-60744894D01* +X139617450Y-60767119D01* +X139711906Y-60775056D01* +X139803981Y-60752038D01* +X139830969Y-60694094D01* +X139826206Y-60629006D01* +X140061156Y-60629006D01* +X140168224Y-60619481D01* +X140252362Y-60590906D01* +X140313569Y-60543281D01* +X140355020Y-60477312D01* +X140379891Y-60393703D01* +X140388181Y-60292456D01* +X140385800Y-60239275D01* +X140372306Y-60197206D01* +X140330634Y-60163869D01* +X140250069Y-60152756D01* +X140143706Y-60189269D01* +X140128625Y-60231338D01* +X140126244Y-60288488D01* +X140107194Y-60339288D01* +X140045281Y-60352781D01* +X139826206Y-60352781D01* +X139832556Y-60249594D01* +X139830175Y-60194825D01* +X139816681Y-60152756D01* +X139775009Y-60120609D01* +X139694444Y-60109894D01* +X139613084Y-60120213D01* +X139572206Y-60151169D01* +X139557125Y-60193238D01* +X139554744Y-60247213D01* +X139561094Y-60352781D01* +X139405519Y-60352781D01* +X139324556Y-60360719D01* +X139280503Y-60403184D01* +X139265819Y-60489306D01* +X138827140Y-60489306D01* +X138827140Y-59593956D01* +X139534106Y-59593956D01* +X139547424Y-59715929D01* +X139587376Y-59823615D01* +X139653963Y-59917013D01* +X139742774Y-59988891D01* +X139849401Y-60032018D01* +X139973844Y-60046394D01* +X140076326Y-60035281D01* +X140172105Y-60001944D01* +X140261181Y-59946381D01* +X140321308Y-59885461D01* +X140368337Y-59804300D01* +X140398698Y-59706470D01* +X140408819Y-59595544D01* +X140399988Y-59447609D01* +X140373497Y-59341941D01* +X140329345Y-59278540D01* +X140267531Y-59257406D01* +X140194506Y-59278044D01* +X140123069Y-59365356D01* +X140140531Y-59428856D01* +X140146881Y-59446319D01* +X140161169Y-59508628D01* +X140165931Y-59590781D01* +X140135769Y-59695556D01* +X140061156Y-59747944D01* +X140061156Y-59371706D01* +X140014325Y-59264550D01* +X139954794Y-59228236D01* +X139869863Y-59216131D01* +X139776002Y-59229625D01* +X139689681Y-59270106D01* +X139621617Y-59329042D01* +X139573000Y-59402663D01* +X139543830Y-59490967D01* +X139534106Y-59593956D01* +X138827140Y-59593956D01* +X138827140Y-59216131D01* +X138827140Y-59083840D01* +X138832566Y-58973388D01* +X138848792Y-58864000D01* +X138875662Y-58756729D01* +X138912917Y-58652609D01* +X138960198Y-58552641D01* +X139017050Y-58457789D01* +X139082925Y-58368967D01* +X139157189Y-58287029D01* +X139239127Y-58212765D01* +X139327950Y-58146889D01* +X139422802Y-58090037D01* +X139522769Y-58042756D01* +X139626890Y-58005501D01* +X139734160Y-57978631D01* +X139843548Y-57962405D01* +X139954000Y-57956979D01* +X140064452Y-57962405D01* +X140173840Y-57978631D01* +X140281110Y-58005501D01* +X140385231Y-58042756D01* +X140485198Y-58090037D01* +X140580050Y-58146889D01* +X140668873Y-58212765D01* +X140750811Y-58287029D01* +X140825075Y-58368967D01* +X140890950Y-58457789D01* +X140947802Y-58552641D01* +X140995083Y-58652609D01* +X141032338Y-58756729D01* +X141059208Y-58864000D01* +X141075434Y-58973388D01* +X141080860Y-59083840D01* +X141080860Y-59216131D01* +X141080860Y-59595544D01* +G37* +D12* +%TO.C,C12*% +X161547500Y-78142148D02* +X161547500Y-78664652D01* +X163017500Y-78142148D02* +X163017500Y-78664652D01* +%TO.C,C8*% +X144352000Y-62476748D02* +X144352000Y-62999252D01* +X145822000Y-62476748D02* +X145822000Y-62999252D01* +%TO.C,kibuzzard-6409565D*% +G36* +X139187321Y-81952902D02* +G01* +X139864125Y-81952902D01* +X139870475Y-82029697D01* +X139889525Y-82109271D01* +X139930800Y-82216427D01* +X139964137Y-82271196D01* +X140003825Y-82321202D01* +X140059387Y-82342633D01* +X140148287Y-82307708D01* +X140214962Y-82252543D01* +X140237187Y-82201346D01* +X140205437Y-82125146D01* +X140184800Y-82096571D01* +X140159400Y-82033864D01* +X140146700Y-81940996D01* +X140164162Y-81838205D01* +X140216550Y-81739383D01* +X140316562Y-81658421D01* +X140384229Y-81634608D01* +X140460231Y-81626671D01* +X140536233Y-81634608D01* +X140603900Y-81658421D01* +X140702325Y-81737796D01* +X140755903Y-81838602D01* +X140773762Y-81940996D01* +X140760268Y-82041008D01* +X140719787Y-82118796D01* +X140684862Y-82199758D01* +X140706294Y-82252146D01* +X140770587Y-82310883D01* +X140858694Y-82344221D01* +X140934100Y-82302946D01* +X140962675Y-82258496D01* +X140984900Y-82220396D01* +X141031731Y-82103714D01* +X141048995Y-82027316D01* +X141054750Y-81952108D01* +X141045225Y-81847510D01* +X141016650Y-81743264D01* +X140969025Y-81639371D01* +X140919217Y-81561385D01* +X140858694Y-81492527D01* +X140784081Y-81433988D01* +X140692006Y-81386958D01* +X140585445Y-81356002D01* +X140467375Y-81345683D01* +X140348114Y-81356200D01* +X140237981Y-81387752D01* +X140141937Y-81435575D01* +X140064943Y-81494908D01* +X140002634Y-81564163D01* +X139950644Y-81641752D01* +X139910559Y-81722318D01* +X139883968Y-81800502D01* +X139869086Y-81877099D01* +X139864125Y-81952902D01* +X139187321Y-81952902D01* +X139187321Y-81345683D01* +X139187321Y-81213392D01* +X139187321Y-80537275D01* +X141441041Y-81213392D01* +X141441041Y-81345683D01* +X141441041Y-101940321D01* +X141441041Y-102072612D01* +X141441041Y-102748729D01* +X139187321Y-102072612D01* +X139187321Y-101940321D01* +X139187321Y-101440258D01* +X139880000Y-101440258D01* +X139890318Y-101521221D01* +X139921275Y-101564083D01* +X139963344Y-101579165D01* +X140018112Y-101581546D01* +X140351487Y-101581546D01* +X140424512Y-101618852D01* +X140454675Y-101699021D01* +X140441975Y-101768077D01* +X140429275Y-101822846D01* +X140489600Y-101910158D01* +X140600725Y-101940321D01* +X140674544Y-101920477D01* +X140707087Y-101870471D01* +X140720581Y-101814908D01* +X140724550Y-101752202D01* +X140697562Y-101665683D01* +X140654700Y-101601389D01* +X140627712Y-101578371D01* +X140680100Y-101560908D01* +X140707484Y-101519236D01* +X140716612Y-101441846D01* +X140705897Y-101360090D01* +X140673750Y-101318021D01* +X140633268Y-101304527D01* +X140578500Y-101302146D01* +X140021287Y-101302146D01* +X139975250Y-101302146D01* +X139906987Y-101330721D01* +X139880000Y-101440258D01* +X139187321Y-101440258D01* +X139187321Y-100819546D01* +X139859362Y-100819546D01* +X139868193Y-100967481D01* +X139894684Y-101073149D01* +X139938836Y-101136550D01* +X140000650Y-101157683D01* +X140073675Y-101137046D01* +X140145112Y-101049733D01* +X140127650Y-100986233D01* +X140121300Y-100968771D01* +X140107012Y-100906461D01* +X140102250Y-100824308D01* +X140132412Y-100719533D01* +X140207025Y-100667146D01* +X140207025Y-101043383D01* +X140253856Y-101150540D01* +X140313387Y-101186854D01* +X140398318Y-101198958D01* +X140492179Y-101185465D01* +X140578500Y-101144983D01* +X140646564Y-101086047D01* +X140695181Y-101012427D01* +X140724351Y-100924122D01* +X140734075Y-100821133D01* +X140720757Y-100699160D01* +X140680805Y-100591475D01* +X140614218Y-100498077D01* +X140525407Y-100426199D01* +X140418780Y-100383071D01* +X140294337Y-100368696D01* +X140191855Y-100379808D01* +X140096076Y-100413146D01* +X140007000Y-100468708D01* +X139946873Y-100529629D01* +X139899844Y-100610790D01* +X139869483Y-100708619D01* +X139859362Y-100819546D01* +X139187321Y-100819546D01* +X139187321Y-99922608D01* +X139878412Y-99922608D01* +X139887937Y-100002777D01* +X139926831Y-100048815D01* +X140016525Y-100063896D01* +X140441975Y-100063896D01* +X140435625Y-100165496D01* +X140454675Y-100262333D01* +X140496744Y-100294877D01* +X140575325Y-100305196D01* +X140654700Y-100295671D01* +X140699944Y-100253999D01* +X140715025Y-100167083D01* +X140705500Y-100063896D01* +X140792812Y-100063896D01* +X140832500Y-100122633D01* +X140832500Y-100167083D01* +X140861075Y-100236933D01* +X140970612Y-100263921D01* +X141051972Y-100253205D01* +X141092850Y-100221058D01* +X141107931Y-100178990D01* +X141110312Y-100124221D01* +X141099288Y-100022797D01* +X141066215Y-99938660D01* +X141011094Y-99871808D01* +X140906120Y-99806324D01* +X140789637Y-99784496D01* +X140705500Y-99784496D01* +X140705500Y-99732108D01* +X140672956Y-99661861D01* +X140575325Y-99638446D01* +X140459437Y-99668608D01* +X140440387Y-99727346D01* +X140440387Y-99784496D01* +X140019700Y-99784496D01* +X139964137Y-99786877D01* +X139922068Y-99801958D01* +X139888731Y-99844027D01* +X139878412Y-99922608D01* +X139187321Y-99922608D01* +X139187321Y-99411433D01* +X139880000Y-99411433D01* +X139890318Y-99492793D01* +X139921275Y-99533671D01* +X139963344Y-99548752D01* +X140018112Y-99551133D01* +X140573737Y-99551133D01* +X140619775Y-99549546D01* +X140688037Y-99520971D01* +X140715025Y-99413021D01* +X140714925Y-99412227D01* +X140829325Y-99412227D01* +X140838850Y-99492396D01* +X140871394Y-99534465D01* +X140912669Y-99548752D01* +X140967437Y-99551133D01* +X141022206Y-99548752D01* +X141064275Y-99533671D01* +X141096422Y-99493189D01* +X141107137Y-99413021D01* +X141096422Y-99331265D01* +X141064275Y-99289196D01* +X141023794Y-99275702D01* +X140969025Y-99273321D01* +X140914256Y-99275702D01* +X140872187Y-99289989D01* +X140838850Y-99332058D01* +X140829325Y-99412227D01* +X140714925Y-99412227D01* +X140704706Y-99331265D01* +X140673750Y-99289196D01* +X140631681Y-99275702D01* +X140576912Y-99273321D01* +X140019700Y-99273321D01* +X139964137Y-99275702D01* +X139922862Y-99289196D01* +X139890715Y-99330868D01* +X139880000Y-99411433D01* +X139187321Y-99411433D01* +X139187321Y-99084408D01* +X139879206Y-99084408D01* +X139895875Y-99154258D01* +X139937547Y-99178071D01* +X140018112Y-99186008D01* +X140130825Y-99154258D01* +X140144318Y-99127271D01* +X140146700Y-99083614D01* +X140161781Y-99041546D01* +X140234012Y-99032021D01* +X140969025Y-99032021D01* +X141024587Y-99029640D01* +X141067450Y-99014558D01* +X141099597Y-98972490D01* +X141110312Y-98893908D01* +X141099597Y-98812152D01* +X141067450Y-98770083D01* +X141025381Y-98756589D01* +X140970612Y-98754208D01* +X140214962Y-98754208D01* +X140068119Y-98765321D01* +X139967312Y-98798658D01* +X139914528Y-98856602D01* +X139886350Y-98957408D01* +X139879206Y-99084408D01* +X139187321Y-99084408D01* +X139187321Y-97966808D01* +X139518050Y-97966808D01* +X139527575Y-98044596D01* +X139560118Y-98085077D01* +X139600600Y-98099364D01* +X139654575Y-98101746D01* +X139975250Y-98101746D01* +X139920481Y-98178343D01* +X139902225Y-98290658D01* +X139915807Y-98375766D01* +X139956553Y-98457522D01* +X140024462Y-98535927D01* +X140110364Y-98599868D01* +X140205084Y-98638233D01* +X140308625Y-98651021D01* +X140412165Y-98638144D01* +X140506886Y-98599515D01* +X140592787Y-98535133D01* +X140660697Y-98456376D01* +X140701443Y-98374619D01* +X140715025Y-98289864D01* +X140694387Y-98177747D01* +X140632475Y-98100158D01* +X140695181Y-98066027D01* +X140716612Y-97952521D01* +X140705897Y-97883861D01* +X140673750Y-97846158D01* +X140634062Y-97832664D01* +X140580087Y-97830283D01* +X139652987Y-97830283D01* +X139599012Y-97832664D01* +X139559325Y-97846952D01* +X139527575Y-97888227D01* +X139518050Y-97966808D01* +X139187321Y-97966808D01* +X139187321Y-97563583D01* +X139187321Y-97090508D01* +X139880000Y-97090508D01* +X139890715Y-97172264D01* +X139922862Y-97214333D01* +X139964137Y-97229414D01* +X140019700Y-97231796D01* +X140297512Y-97231796D01* +X140400700Y-97251639D01* +X140437212Y-97327046D01* +X140402684Y-97400864D01* +X140299100Y-97425471D01* +X140021287Y-97425471D01* +X139966518Y-97427852D01* +X139924450Y-97441346D01* +X139891112Y-97483018D01* +X139880000Y-97563583D01* +X139890715Y-97644943D01* +X139922862Y-97685821D01* +X139964931Y-97700902D01* +X140019700Y-97703283D01* +X140297512Y-97703283D01* +X140433596Y-97693758D01* +X140541282Y-97665183D01* +X140620569Y-97617558D01* +X140693792Y-97521514D01* +X140718200Y-97404833D01* +X140687244Y-97293708D01* +X140630094Y-97215127D01* +X140580087Y-97173058D01* +X140656816Y-97110969D01* +X140702854Y-97030536D01* +X140718200Y-96931758D01* +X140690022Y-96834524D01* +X140605487Y-96752371D01* +X140688037Y-96725383D01* +X140716612Y-96609496D01* +X140705897Y-96536868D01* +X140673750Y-96496783D01* +X140633268Y-96481702D01* +X140578500Y-96479321D01* +X140019700Y-96479321D01* +X139964137Y-96481702D01* +X139922862Y-96495196D01* +X139890715Y-96536868D01* +X139880000Y-96617433D01* +X139890318Y-96698396D01* +X139921275Y-96741258D01* +X139963344Y-96756339D01* +X140018112Y-96758721D01* +X140299100Y-96758721D01* +X140402684Y-96782533D01* +X140437212Y-96853971D01* +X140402684Y-96927789D01* +X140299100Y-96952396D01* +X140021287Y-96952396D01* +X139966518Y-96954777D01* +X139924450Y-96968271D01* +X139891112Y-97009943D01* +X139880000Y-97090508D01* +X139187321Y-97090508D01* +X139187321Y-96227702D01* +X139187321Y-95881627D01* +X139883175Y-95881627D01* +X139904209Y-95999300D01* +X139967312Y-96077683D01* +X139904606Y-96111814D01* +X139883175Y-96227702D01* +X139893493Y-96298147D01* +X139924450Y-96336446D01* +X139966518Y-96349939D01* +X140021287Y-96352321D01* +X140576912Y-96352321D01* +X140631681Y-96349939D01* +X140673750Y-96335652D01* +X140707087Y-96293583D01* +X140716612Y-96201508D01* +X140694387Y-96112211D01* +X140627712Y-96076096D01* +X140660256Y-96047521D01* +X140695975Y-95985608D01* +X140715025Y-95887183D01* +X140701178Y-95795549D01* +X140659639Y-95709030D01* +X140590406Y-95627627D01* +X140502741Y-95561922D01* +X140405903Y-95522499D01* +X140299893Y-95509358D01* +X140193796Y-95522411D01* +X140096693Y-95561569D01* +X140008587Y-95626833D01* +X139938914Y-95707355D01* +X139897109Y-95792286D01* +X139883175Y-95881627D01* +X139187321Y-95881627D01* +X139187321Y-95050571D01* +X139859362Y-95050571D01* +X139868193Y-95198506D01* +X139894684Y-95304174D01* +X139938836Y-95367575D01* +X140000650Y-95388708D01* +X140073675Y-95368071D01* +X140145112Y-95280758D01* +X140127650Y-95217258D01* +X140121300Y-95199796D01* +X140107012Y-95137486D01* +X140102250Y-95055333D01* +X140132412Y-94950558D01* +X140207025Y-94898171D01* +X140207025Y-95274408D01* +X140253856Y-95381564D01* +X140313387Y-95417879D01* +X140398318Y-95429983D01* +X140492179Y-95416489D01* +X140578500Y-95376008D01* +X140646564Y-95317072D01* +X140695181Y-95243452D01* +X140724351Y-95155147D01* +X140734075Y-95052158D01* +X140720757Y-94930185D01* +X140680805Y-94822500D01* +X140614218Y-94729102D01* +X140525407Y-94657224D01* +X140418780Y-94614096D01* +X140294337Y-94599721D01* +X140191855Y-94610833D01* +X140096076Y-94644171D01* +X140007000Y-94699733D01* +X139946873Y-94760654D01* +X139899844Y-94841814D01* +X139869483Y-94939644D01* +X139859362Y-95050571D01* +X139187321Y-95050571D01* +X139187321Y-94036158D01* +X139880000Y-94036158D01* +X139890318Y-94117121D01* +X139921275Y-94159983D01* +X139963344Y-94175064D01* +X140018112Y-94177446D01* +X140351487Y-94177446D01* +X140424512Y-94214752D01* +X140454675Y-94294921D01* +X140441975Y-94363977D01* +X140429275Y-94418746D01* +X140489600Y-94506058D01* +X140600725Y-94536221D01* +X140674544Y-94516377D01* +X140707087Y-94466371D01* +X140720581Y-94410808D01* +X140724550Y-94348102D01* +X140697562Y-94261583D01* +X140654700Y-94197289D01* +X140627712Y-94174271D01* +X140680100Y-94156808D01* +X140707484Y-94115136D01* +X140716612Y-94037746D01* +X140705897Y-93955989D01* +X140673750Y-93913921D01* +X140633268Y-93900427D01* +X140578500Y-93898046D01* +X140021287Y-93898046D01* +X139975250Y-93898046D01* +X139906987Y-93926621D01* +X139880000Y-94036158D01* +X139187321Y-94036158D01* +X139187321Y-93110646D01* +X139518050Y-93110646D01* +X139527575Y-93188433D01* +X139560118Y-93228914D01* +X139600600Y-93243202D01* +X139654575Y-93245583D01* +X139975250Y-93245583D01* +X139920481Y-93322180D01* +X139902225Y-93434496D01* +X139915807Y-93519603D01* +X139956553Y-93601360D01* +X140024462Y-93679764D01* +X140110364Y-93743705D01* +X140205084Y-93782070D01* +X140308625Y-93794858D01* +X140412165Y-93781982D01* +X140506886Y-93743353D01* +X140592787Y-93678971D01* +X140660697Y-93600213D01* +X140701443Y-93518457D01* +X140715025Y-93433702D01* +X140694387Y-93321585D01* +X140632475Y-93243996D01* +X140695181Y-93209864D01* +X140716612Y-93096358D01* +X140705897Y-93027699D01* +X140673750Y-92989996D01* +X140634062Y-92976502D01* +X140580087Y-92974121D01* +X139652987Y-92974121D01* +X139599012Y-92976502D01* +X139559325Y-92990789D01* +X139527575Y-93032064D01* +X139518050Y-93110646D01* +X139187321Y-93110646D01* +X139187321Y-92159733D01* +X139872062Y-92159733D01* +X139887937Y-92281177D01* +X139935562Y-92381983D01* +X139989934Y-92447468D01* +X140048275Y-92469296D01* +X140130825Y-92432783D01* +X140193928Y-92369680D01* +X140214962Y-92316896D01* +X140185594Y-92246252D01* +X140156225Y-92152589D01* +X140193531Y-92058133D01* +X140298306Y-92013683D01* +X140403875Y-92059721D01* +X140441975Y-92158939D01* +X140414987Y-92240696D01* +X140380062Y-92326421D01* +X140401890Y-92379999D01* +X140467375Y-92435958D01* +X140558656Y-92469296D01* +X140630887Y-92428021D01* +X140661050Y-92383571D01* +X140676925Y-92358171D01* +X140709469Y-92274033D01* +X140726137Y-92156558D01* +X140714496Y-92059015D01* +X140679571Y-91965353D01* +X140621362Y-91875571D01* +X140562426Y-91816436D01* +X140487218Y-91769208D01* +X140399112Y-91738252D01* +X140301481Y-91727933D01* +X140203453Y-91738252D01* +X140114156Y-91769208D01* +X140037758Y-91816436D01* +X139978425Y-91875571D01* +X139919334Y-91967822D01* +X139883880Y-92062543D01* +X139872062Y-92159733D01* +X139187321Y-92159733D01* +X139187321Y-91485046D01* +X139880000Y-91485046D01* +X139890318Y-91566405D01* +X139921275Y-91607283D01* +X139963344Y-91622364D01* +X140018112Y-91624746D01* +X140573737Y-91624746D01* +X140619775Y-91623158D01* +X140688037Y-91594583D01* +X140715025Y-91486633D01* +X140714925Y-91485839D01* +X140829325Y-91485839D01* +X140838850Y-91566008D01* +X140871394Y-91608077D01* +X140912669Y-91622364D01* +X140967437Y-91624746D01* +X141022206Y-91622364D01* +X141064275Y-91607283D01* +X141096422Y-91566802D01* +X141107137Y-91486633D01* +X141096422Y-91404877D01* +X141064275Y-91362808D01* +X141023794Y-91349314D01* +X140969025Y-91346933D01* +X140914256Y-91349314D01* +X140872187Y-91363602D01* +X140838850Y-91405671D01* +X140829325Y-91485839D01* +X140714925Y-91485839D01* +X140704706Y-91404877D01* +X140673750Y-91362808D01* +X140631681Y-91349314D01* +X140576912Y-91346933D01* +X140019700Y-91346933D01* +X139964137Y-91349314D01* +X139922862Y-91362808D01* +X139890715Y-91404480D01* +X139880000Y-91485046D01* +X139187321Y-91485046D01* +X139187321Y-91080233D01* +X139187321Y-90607158D01* +X139880000Y-90607158D01* +X139890715Y-90688914D01* +X139922862Y-90730983D01* +X139964137Y-90746064D01* +X140019700Y-90748446D01* +X140297512Y-90748446D01* +X140400700Y-90768289D01* +X140437212Y-90843696D01* +X140402684Y-90917514D01* +X140299100Y-90942121D01* +X140021287Y-90942121D01* +X139966518Y-90944502D01* +X139924450Y-90957996D01* +X139891112Y-90999668D01* +X139880000Y-91080233D01* +X139890715Y-91161593D01* +X139922862Y-91202471D01* +X139964931Y-91217552D01* +X140019700Y-91219933D01* +X140297512Y-91219933D01* +X140433596Y-91210408D01* +X140541282Y-91181833D01* +X140620569Y-91134208D01* +X140693792Y-91038164D01* +X140718200Y-90921483D01* +X140687244Y-90810358D01* +X140630094Y-90731777D01* +X140580087Y-90689708D01* +X140656816Y-90627619D01* +X140702854Y-90547186D01* +X140718200Y-90448408D01* +X140690022Y-90351174D01* +X140605487Y-90269021D01* +X140688037Y-90242033D01* +X140716612Y-90126146D01* +X140705897Y-90053518D01* +X140673750Y-90013433D01* +X140633268Y-89998352D01* +X140578500Y-89995971D01* +X140019700Y-89995971D01* +X139964137Y-89998352D01* +X139922862Y-90011846D01* +X139890715Y-90053518D01* +X139880000Y-90134083D01* +X139890318Y-90215046D01* +X139921275Y-90257908D01* +X139963344Y-90272989D01* +X140018112Y-90275371D01* +X140299100Y-90275371D01* +X140402684Y-90299183D01* +X140437212Y-90370621D01* +X140402684Y-90444439D01* +X140299100Y-90469046D01* +X140021287Y-90469046D01* +X139966518Y-90471427D01* +X139924450Y-90484921D01* +X139891112Y-90526593D01* +X139880000Y-90607158D01* +X139187321Y-90607158D01* +X139187321Y-89006958D01* +X139880000Y-89006958D01* +X139890318Y-89087921D01* +X139921275Y-89130783D01* +X139963344Y-89145864D01* +X140018112Y-89148246D01* +X140351487Y-89148246D01* +X140424512Y-89185552D01* +X140454675Y-89265721D01* +X140441975Y-89334777D01* +X140429275Y-89389546D01* +X140489600Y-89476858D01* +X140600725Y-89507021D01* +X140674544Y-89487177D01* +X140707087Y-89437171D01* +X140720581Y-89381608D01* +X140724550Y-89318902D01* +X140697562Y-89232383D01* +X140654700Y-89168089D01* +X140627712Y-89145071D01* +X140680100Y-89127608D01* +X140707484Y-89085936D01* +X140716612Y-89008546D01* +X140705897Y-88926789D01* +X140673750Y-88884721D01* +X140633268Y-88871227D01* +X140578500Y-88868846D01* +X140021287Y-88868846D01* +X139975250Y-88868846D01* +X139906987Y-88897421D01* +X139880000Y-89006958D01* +X139187321Y-89006958D01* +X139187321Y-88386246D01* +X139859362Y-88386246D01* +X139868193Y-88534181D01* +X139894684Y-88639849D01* +X139938836Y-88703250D01* +X140000650Y-88724383D01* +X140073675Y-88703746D01* +X140145112Y-88616433D01* +X140127650Y-88552933D01* +X140121300Y-88535471D01* +X140107012Y-88473161D01* +X140102250Y-88391008D01* +X140132412Y-88286233D01* +X140207025Y-88233846D01* +X140207025Y-88610083D01* +X140253856Y-88717239D01* +X140313387Y-88753554D01* +X140398318Y-88765658D01* +X140492179Y-88752164D01* +X140578500Y-88711683D01* +X140646564Y-88652747D01* +X140695181Y-88579127D01* +X140724351Y-88490822D01* +X140734075Y-88387833D01* +X140720757Y-88265860D01* +X140680805Y-88158175D01* +X140614218Y-88064777D01* +X140525407Y-87992899D01* +X140418780Y-87949771D01* +X140294337Y-87935396D01* +X140191855Y-87946508D01* +X140096076Y-87979846D01* +X140007000Y-88035408D01* +X139946873Y-88096329D01* +X139899844Y-88177489D01* +X139869483Y-88275319D01* +X139859362Y-88386246D01* +X139187321Y-88386246D01* +X139187321Y-87483752D01* +X139865712Y-87483752D01* +X139871180Y-87580149D01* +X139887584Y-87665080D01* +X139914925Y-87738546D01* +X140001443Y-87825064D01* +X140065539Y-87848282D01* +X140141937Y-87856021D01* +X140217542Y-87848282D01* +X140279256Y-87825064D01* +X140356250Y-87748071D01* +X140395937Y-87648058D01* +X140416575Y-87544871D01* +X140439197Y-87463908D01* +X140478487Y-87436921D01* +X140513412Y-87530583D01* +X140489600Y-87642502D01* +X140465787Y-87713146D01* +X140521350Y-87784583D01* +X140615012Y-87819508D01* +X140678512Y-87763946D01* +X140718994Y-87646471D01* +X140732487Y-87532171D01* +X140722454Y-87408155D01* +X140692355Y-87311699D01* +X140642190Y-87242801D01* +X140571959Y-87201463D01* +X140481662Y-87187683D01* +X140403279Y-87195224D01* +X140336406Y-87217846D01* +X140246712Y-87294046D01* +X140197897Y-87392868D01* +X140172100Y-87492483D01* +X140153844Y-87572255D01* +X140127650Y-87598846D01* +X140099075Y-87574636D01* +X140089550Y-87502008D01* +X140128443Y-87381358D01* +X140167337Y-87275789D01* +X140140350Y-87219433D01* +X140066928Y-87174189D01* +X140014937Y-87159108D01* +X139954612Y-87189271D01* +X139905223Y-87284785D01* +X139875590Y-87382946D01* +X139865712Y-87483752D01* +X139187321Y-87483752D01* +X139187321Y-86916221D01* +X139187321Y-86359008D01* +X139881587Y-86359008D01* +X139892303Y-86440368D01* +X139924450Y-86481246D01* +X139964931Y-86496327D01* +X140019700Y-86498708D01* +X140300687Y-86498708D01* +X140400700Y-86537602D01* +X140438800Y-86639202D01* +X140402287Y-86739214D01* +X140300687Y-86776521D01* +X140021287Y-86776521D01* +X139940325Y-86786046D01* +X139896272Y-86827321D01* +X139881587Y-86916221D01* +X139892303Y-86997977D01* +X139924450Y-87040046D01* +X139964931Y-87053539D01* +X140019700Y-87055921D01* +X140299100Y-87055921D01* +X140409607Y-87044191D01* +X140508297Y-87009001D01* +X140595168Y-86950352D01* +X140662637Y-86874064D01* +X140703118Y-86785958D01* +X140716612Y-86686033D01* +X140680100Y-86566971D01* +X140646762Y-86524108D01* +X140615012Y-86495533D01* +X140680100Y-86479658D01* +X140707484Y-86438780D01* +X140716612Y-86360596D01* +X140706690Y-86280030D01* +X140676925Y-86238358D01* +X140636444Y-86223277D01* +X140583262Y-86220896D01* +X140021287Y-86220896D01* +X139966518Y-86223277D01* +X139924450Y-86236771D01* +X139892303Y-86278443D01* +X139881587Y-86359008D01* +X139187321Y-86359008D01* +X139187321Y-85738296D01* +X139859362Y-85738296D01* +X139868193Y-85886231D01* +X139894684Y-85991899D01* +X139938836Y-86055300D01* +X140000650Y-86076433D01* +X140073675Y-86055796D01* +X140145112Y-85968483D01* +X140127650Y-85904983D01* +X140121300Y-85887521D01* +X140107012Y-85825211D01* +X140102250Y-85743058D01* +X140132412Y-85638283D01* +X140207025Y-85585896D01* +X140207025Y-85962133D01* +X140253856Y-86069289D01* +X140313387Y-86105604D01* +X140398318Y-86117708D01* +X140492179Y-86104214D01* +X140578500Y-86063733D01* +X140646564Y-86004797D01* +X140695181Y-85931177D01* +X140724351Y-85842872D01* +X140734075Y-85739883D01* +X140720757Y-85617910D01* +X140680805Y-85510225D01* +X140614218Y-85416827D01* +X140525407Y-85344949D01* +X140418780Y-85301821D01* +X140294337Y-85287446D01* +X140191855Y-85298558D01* +X140096076Y-85331896D01* +X140007000Y-85387458D01* +X139946873Y-85448379D01* +X139899844Y-85529539D01* +X139869483Y-85627369D01* +X139859362Y-85738296D01* +X139187321Y-85738296D01* +X139187321Y-85032652D01* +X139881587Y-85032652D01* +X139892303Y-85121354D01* +X139924450Y-85166796D01* +X139964931Y-85181877D01* +X140019700Y-85184258D01* +X140967437Y-85184258D01* +X141022206Y-85181877D01* +X141064275Y-85167589D01* +X141097612Y-85125521D01* +X141107137Y-85045352D01* +X141097612Y-84965183D01* +X141065069Y-84923114D01* +X141023794Y-84908827D01* +X140969025Y-84906446D01* +X140635650Y-84906446D01* +X140695181Y-84828261D01* +X140715025Y-84723883D01* +X140701090Y-84632249D01* +X140659286Y-84545730D01* +X140589612Y-84464327D01* +X140501506Y-84398622D01* +X140404404Y-84359199D01* +X140298306Y-84346058D01* +X140192296Y-84359111D01* +X140095459Y-84398269D01* +X140007793Y-84463533D01* +X139938561Y-84544672D01* +X139897021Y-84631455D01* +X139883175Y-84723883D01* +X139902225Y-84829849D01* +X139959375Y-84909621D01* +X139901034Y-84946729D01* +X139881587Y-85032652D01* +X139187321Y-85032652D01* +X139187321Y-84095233D01* +X139187321Y-83538021D01* +X139881587Y-83538021D01* +X139892303Y-83619380D01* +X139924450Y-83660258D01* +X139964931Y-83675339D01* +X140019700Y-83677721D01* +X140300687Y-83677721D01* +X140400700Y-83716614D01* +X140438800Y-83818214D01* +X140402287Y-83918227D01* +X140300687Y-83955533D01* +X140021287Y-83955533D01* +X139940325Y-83965058D01* +X139896272Y-84006333D01* +X139881587Y-84095233D01* +X139892303Y-84176989D01* +X139924450Y-84219058D01* +X139964931Y-84232552D01* +X140019700Y-84234933D01* +X140299100Y-84234933D01* +X140409607Y-84223203D01* +X140508297Y-84188014D01* +X140595168Y-84129364D01* +X140662637Y-84053076D01* +X140703118Y-83964970D01* +X140716612Y-83865046D01* +X140680100Y-83745983D01* +X140646762Y-83703121D01* +X140615012Y-83674546D01* +X140680100Y-83658671D01* +X140707484Y-83617793D01* +X140716612Y-83539608D01* +X140706690Y-83459043D01* +X140676925Y-83417371D01* +X140636444Y-83402289D01* +X140583262Y-83399908D01* +X140021287Y-83399908D01* +X139966518Y-83402289D01* +X139924450Y-83415783D01* +X139892303Y-83457455D01* +X139881587Y-83538021D01* +X139187321Y-83538021D01* +X139187321Y-82860158D01* +X139865712Y-82860158D01* +X139877817Y-82963147D01* +X139914131Y-83062564D01* +X139976043Y-83152854D01* +X140064943Y-83228458D01* +X140174679Y-83279655D01* +X140299100Y-83296721D01* +X140418603Y-83282080D01* +X140523114Y-83238160D01* +X140612631Y-83164958D01* +X140680982Y-83072707D01* +X140721992Y-82971636D01* +X140735662Y-82861746D01* +X140721904Y-82751679D01* +X140680629Y-82650079D01* +X140611837Y-82556946D01* +X140521879Y-82482862D01* +X140417104Y-82438412D01* +X140297512Y-82423596D01* +X140177061Y-82440463D01* +X140069706Y-82491064D01* +X139981203Y-82566272D01* +X139917306Y-82656958D01* +X139878611Y-82756971D01* +X139865712Y-82860158D01* +X139187321Y-82860158D01* +X139187321Y-81952902D01* +G37* +G36* +X140367561Y-82716886D02* +G01* +X140416575Y-82753796D01* +X140456262Y-82860158D01* +X140418162Y-82966521D01* +X140370140Y-83003430D01* +X140302275Y-83015733D01* +X140234012Y-83002636D01* +X140184800Y-82963346D01* +X140145112Y-82858571D01* +X140184006Y-82755383D01* +X140232425Y-82717283D01* +X140299893Y-82704583D01* +X140367561Y-82716886D01* +G37* +G36* +X140400700Y-98144608D02* +G01* +X140443562Y-98242239D01* +X140401494Y-98341458D01* +X140307037Y-98379558D01* +X140213375Y-98339077D01* +X140172100Y-98240652D01* +X140214168Y-98145402D01* +X140307037Y-98108096D01* +X140400700Y-98144608D01* +G37* +G36* +X140394350Y-95826064D02* +G01* +X140438800Y-95927664D01* +X140394350Y-96027677D01* +X140298306Y-96064983D01* +X140203850Y-96026089D01* +X140160987Y-95928458D01* +X140203056Y-95828446D01* +X140297512Y-95787171D01* +X140394350Y-95826064D01* +G37* +G36* +X140400700Y-93288446D02* +G01* +X140443562Y-93386077D01* +X140401494Y-93485296D01* +X140307037Y-93523396D01* +X140213375Y-93482914D01* +X140172100Y-93384489D01* +X140214168Y-93289239D01* +X140307037Y-93251933D01* +X140400700Y-93288446D01* +G37* +G36* +X140393556Y-84661971D02* +G01* +X140437212Y-84763571D01* +X140392762Y-84864377D01* +X140296719Y-84901683D01* +X140202262Y-84862789D01* +X140159400Y-84765158D01* +X140202262Y-84665146D01* +X140297512Y-84623871D01* +X140393556Y-84661971D01* +G37* +G36* +X140441181Y-100714771D02* +G01* +X140483250Y-100817165D01* +X140461025Y-100896539D01* +X140402287Y-100924321D01* +X140351487Y-100863996D01* +X140351487Y-100663971D01* +X140441181Y-100714771D01* +G37* +G36* +X140441181Y-94945796D02* +G01* +X140483250Y-95048189D01* +X140461025Y-95127564D01* +X140402287Y-95155346D01* +X140351487Y-95095021D01* +X140351487Y-94894996D01* +X140441181Y-94945796D01* +G37* +G36* +X140441181Y-88281471D02* +G01* +X140483250Y-88383864D01* +X140461025Y-88463239D01* +X140402287Y-88491021D01* +X140351487Y-88430696D01* +X140351487Y-88230671D01* +X140441181Y-88281471D01* +G37* +G36* +X140441181Y-85633521D02* +G01* +X140483250Y-85735914D01* +X140461025Y-85815289D01* +X140402287Y-85843071D01* +X140351487Y-85782746D01* +X140351487Y-85582721D01* +X140441181Y-85633521D01* +G37* +%TO.C,C16*% +X160120000Y-67082252D02* +X160120000Y-66559748D01* +X158650000Y-67082252D02* +X158650000Y-66559748D01* +%TO.C,U2*% +X165371300Y-72419200D02* +X165371300Y-70469200D01* +X165371300Y-72419200D02* +X165371300Y-74369200D01* +X156501300Y-72419200D02* +X156501300Y-70469200D01* +X156501300Y-72419200D02* +X156501300Y-75869200D01* +%TO.C,D1*% +X162781000Y-92666000D02* +X162781000Y-85256000D01* +X160561000Y-85256000D02* +X160561000Y-92666000D01* +X162781000Y-85256000D02* +X160561000Y-85256000D01* +%TO.C,R12*% +X153873500Y-63473064D02* +X153873500Y-63018936D01* +X152403500Y-63473064D02* +X152403500Y-63018936D01* +%TO.C,R5*% +X152961064Y-79421000D02* +X152506936Y-79421000D01* +X152961064Y-80891000D02* +X152506936Y-80891000D01* +%TO.C,R10*% +X162661964Y-59863000D02* +X162207836Y-59863000D01* +X162661964Y-61333000D02* +X162207836Y-61333000D01* +%TO.C,kibuzzard-640955D5*% +G36* +X152202356Y-126779867D02* +G01* +X152070065Y-126779867D01* +X151979608Y-126775423D01* +X151890022Y-126762134D01* +X151802171Y-126740128D01* +X151716899Y-126709618D01* +X151635028Y-126670896D01* +X151557347Y-126624336D01* +X151484604Y-126570386D01* +X151417499Y-126509565D01* +X151356679Y-126442460D01* +X151302729Y-126369717D01* +X151264696Y-126306262D01* +X152202356Y-126306262D01* +X152243631Y-126406275D01* +X152342056Y-126449137D01* +X152962769Y-126449137D01* +X153061194Y-126430088D01* +X153095325Y-126388812D01* +X153105644Y-126308644D01* +X153096119Y-126227681D01* +X153058812Y-126181644D01* +X152965944Y-126166562D01* +X152675431Y-126166562D01* +X152675431Y-126158625D01* +X152715119Y-126142750D01* +X152813544Y-126089172D01* +X152924669Y-126001463D01* +X152976262Y-125944313D01* +X153019919Y-125871287D01* +X153049684Y-125787944D01* +X153059606Y-125699838D01* +X153046377Y-125590741D01* +X153006690Y-125489935D01* +X152940544Y-125397419D01* +X152853143Y-125323776D01* +X152749691Y-125279591D01* +X152630187Y-125264862D01* +X152510772Y-125279415D01* +X152407585Y-125323071D01* +X152320625Y-125395831D01* +X152254920Y-125486936D01* +X152215497Y-125585626D01* +X152202356Y-125691900D01* +X152210294Y-125772862D01* +X152253553Y-125818106D01* +X152342056Y-125833188D01* +X152423019Y-125823663D01* +X152465881Y-125795088D01* +X152480962Y-125755400D01* +X152483344Y-125703012D01* +X152483344Y-125693488D01* +X152489694Y-125656975D01* +X152531762Y-125583156D01* +X152619869Y-125545850D01* +X152699244Y-125560137D01* +X152741312Y-125591094D01* +X152765919Y-125633956D01* +X152777031Y-125674437D01* +X152762148Y-125743891D01* +X152717500Y-125809375D01* +X152651817Y-125869502D01* +X152573831Y-125922881D01* +X152489694Y-125973284D01* +X152405556Y-126024481D01* +X152327570Y-126081234D01* +X152261887Y-126148306D01* +X152217239Y-126223911D01* +X152202356Y-126306262D01* +X151264696Y-126306262D01* +X151256169Y-126292036D01* +X151217447Y-126210166D01* +X151186936Y-126124894D01* +X151164931Y-126037042D01* +X151151642Y-125947457D01* +X151147198Y-125857000D01* +X151151642Y-125766543D01* +X151164931Y-125676958D01* +X151186936Y-125589106D01* +X151217447Y-125503834D01* +X151256169Y-125421964D01* +X151302729Y-125344283D01* +X151356679Y-125271540D01* +X151417499Y-125204435D01* +X151484604Y-125143614D01* +X151557347Y-125089664D01* +X151635028Y-125043104D01* +X151716899Y-125004382D01* +X151802171Y-124973872D01* +X151890022Y-124951866D01* +X151979608Y-124938577D01* +X152070065Y-124934133D01* +X152202356Y-124934133D01* +X153105644Y-124934133D01* +X153237935Y-124934133D01* +X153328392Y-124938577D01* +X153417978Y-124951866D01* +X153505829Y-124973872D01* +X153591101Y-125004382D01* +X153672972Y-125043104D01* +X153750653Y-125089664D01* +X153823396Y-125143614D01* +X153890501Y-125204435D01* +X153951321Y-125271540D01* +X154005271Y-125344283D01* +X154051831Y-125421964D01* +X154090553Y-125503834D01* +X154121064Y-125589106D01* +X154143069Y-125676958D01* +X154156358Y-125766543D01* +X154160802Y-125857000D01* +X154156358Y-125947457D01* +X154143069Y-126037042D01* +X154121064Y-126124894D01* +X154090553Y-126210166D01* +X154051831Y-126292036D01* +X154005271Y-126369717D01* +X153951321Y-126442460D01* +X153890501Y-126509565D01* +X153823396Y-126570386D01* +X153750653Y-126624336D01* +X153672972Y-126670896D01* +X153591101Y-126709618D01* +X153505829Y-126740128D01* +X153417978Y-126762134D01* +X153328392Y-126775423D01* +X153237935Y-126779867D01* +X153105644Y-126779867D01* +X152962769Y-126779867D01* +X152202356Y-126779867D01* +G37* +%TO.C,D8*% +X156503000Y-62636800D02* +X156503000Y-65896800D01* +X158203000Y-62636800D02* +X158203000Y-65896800D01* +X158203000Y-62636800D02* +X156503000Y-62636800D01* +%TO.C,C3*% +X155111500Y-97240000D02* +X155111500Y-100090000D01* +X155111500Y-105960000D02* +X155111500Y-103110000D01* +X162767063Y-97240000D02* +X155111500Y-97240000D01* +X162767063Y-105960000D02* +X155111500Y-105960000D01* +X163831500Y-98304437D02* +X162767063Y-97240000D01* +X163831500Y-98304437D02* +X163831500Y-100090000D01* +X163831500Y-104895563D02* +X162767063Y-105960000D01* +X163831500Y-104895563D02* +X163831500Y-103110000D01* +X164571500Y-104610000D02* +X164571500Y-103610000D01* +X165071500Y-104110000D02* +X164071500Y-104110000D01* +%TO.C,R2*% +X151895500Y-120145436D02* +X151895500Y-120599564D01* +X153365500Y-120145436D02* +X153365500Y-120599564D01* +%TO.C,R6*% +X150244436Y-77081000D02* +X150698564Y-77081000D01* +X150244436Y-75611000D02* +X150698564Y-75611000D01* +%TO.C,kibuzzard-64095693*% +G36* +X138050588Y-86021862D02* +G01* +X138092656Y-86124256D01* +X138070431Y-86203631D01* +X138011694Y-86231413D01* +X137960894Y-86171088D01* +X137960894Y-85971063D01* +X138050588Y-86021862D01* +G37* +G36* +X138010106Y-81740375D02* +G01* +X138052969Y-81838006D01* +X138010900Y-81937225D01* +X137916444Y-81975325D01* +X137822781Y-81934844D01* +X137781506Y-81836419D01* +X137823575Y-81741169D01* +X137916444Y-81703862D01* +X138010106Y-81740375D01* +G37* +G36* +X136796727Y-80950594D02* +G01* +X137475119Y-80950594D01* +X137480587Y-81046990D01* +X137496991Y-81131922D01* +X137524331Y-81205387D01* +X137610850Y-81291906D01* +X137674945Y-81315123D01* +X137751344Y-81322862D01* +X137826948Y-81315123D01* +X137888663Y-81291906D01* +X137965656Y-81214912D01* +X138005344Y-81114900D01* +X138025981Y-81011712D01* +X138048603Y-80930750D01* +X138087894Y-80903762D01* +X138122819Y-80997425D01* +X138099006Y-81109344D01* +X138075194Y-81179987D01* +X138130756Y-81251425D01* +X138224419Y-81286350D01* +X138287919Y-81230787D01* +X138328400Y-81113312D01* +X138341894Y-80999012D01* +X138331861Y-80874997D01* +X138301762Y-80778540D01* +X138251597Y-80709643D01* +X138181366Y-80668304D01* +X138091069Y-80654525D01* +X138012686Y-80662066D01* +X137945812Y-80684687D01* +X137856119Y-80760887D01* +X137807303Y-80859709D01* +X137781506Y-80959325D01* +X137763250Y-81039097D01* +X137737056Y-81065687D01* +X137708481Y-81041478D01* +X137698956Y-80968850D01* +X137737850Y-80848200D01* +X137776744Y-80742631D01* +X137749756Y-80686275D01* +X137676334Y-80641031D01* +X137624344Y-80625950D01* +X137564019Y-80656112D01* +X137514630Y-80751627D01* +X137484997Y-80849787D01* +X137475119Y-80950594D01* +X136796727Y-80950594D01* +X136796727Y-80625950D01* +X136796727Y-80493658D01* +X136796727Y-79818495D01* +X139047273Y-80493658D01* +X139047273Y-80625950D01* +X139047273Y-86506050D01* +X139047273Y-86638342D01* +X139047273Y-87313505D01* +X136796727Y-86638342D01* +X136796727Y-86506050D01* +X136796727Y-86126638D01* +X137468769Y-86126638D01* +X137477599Y-86274573D01* +X137504091Y-86380241D01* +X137548243Y-86443641D01* +X137610056Y-86464775D01* +X137683081Y-86444138D01* +X137754519Y-86356825D01* +X137737056Y-86293325D01* +X137730706Y-86275863D01* +X137716419Y-86213553D01* +X137711656Y-86131400D01* +X137741819Y-86026625D01* +X137816431Y-85974238D01* +X137816431Y-86350475D01* +X137863263Y-86457631D01* +X137922794Y-86493945D01* +X138007725Y-86506050D01* +X138101586Y-86492556D01* +X138187906Y-86452075D01* +X138255970Y-86393139D01* +X138304588Y-86319519D01* +X138333758Y-86231214D01* +X138343481Y-86128225D01* +X138330164Y-86006252D01* +X138290212Y-85898567D01* +X138223625Y-85805169D01* +X138134813Y-85733290D01* +X138028186Y-85690163D01* +X137903744Y-85675787D01* +X137801262Y-85686900D01* +X137705483Y-85720237D01* +X137616406Y-85775800D01* +X137556280Y-85836720D01* +X137509250Y-85917881D01* +X137478889Y-86015711D01* +X137468769Y-86126638D01* +X136796727Y-86126638D01* +X136796727Y-85112225D01* +X137489406Y-85112225D01* +X137499725Y-85193188D01* +X137530681Y-85236050D01* +X137572750Y-85251131D01* +X137627519Y-85253512D01* +X137960894Y-85253512D01* +X138033919Y-85290819D01* +X138064081Y-85370987D01* +X138051381Y-85440044D01* +X138038681Y-85494812D01* +X138099006Y-85582125D01* +X138210131Y-85612288D01* +X138283950Y-85592444D01* +X138316494Y-85542437D01* +X138329988Y-85486875D01* +X138333956Y-85424169D01* +X138306969Y-85337650D01* +X138264106Y-85273356D01* +X138237119Y-85250337D01* +X138289506Y-85232875D01* +X138316891Y-85191203D01* +X138326019Y-85113813D01* +X138315303Y-85032056D01* +X138283156Y-84989988D01* +X138242675Y-84976494D01* +X138187906Y-84974112D01* +X137630694Y-84974112D01* +X137584656Y-84974112D01* +X137516394Y-85002687D01* +X137489406Y-85112225D01* +X136796727Y-85112225D01* +X136796727Y-84732019D01* +X137487819Y-84732019D01* +X137499328Y-84810005D01* +X137533856Y-84851875D01* +X137577513Y-84868544D01* +X137633869Y-84870925D01* +X137640219Y-84870925D01* +X137751344Y-84843937D01* +X137776347Y-84792542D01* +X137784681Y-84711381D01* +X137772775Y-84633395D01* +X137737056Y-84591525D01* +X137694194Y-84576444D01* +X137638631Y-84574062D01* +X137632281Y-84574062D01* +X137517981Y-84605019D01* +X137495359Y-84652247D01* +X137487819Y-84732019D01* +X136796727Y-84732019D01* +X136796727Y-84328000D01* +X137489406Y-84328000D01* +X137491788Y-84381181D01* +X137505281Y-84423250D01* +X137546953Y-84456587D01* +X137627519Y-84467700D01* +X137733881Y-84431187D01* +X137748963Y-84389119D01* +X137751344Y-84331969D01* +X137770394Y-84281169D01* +X137832306Y-84267675D01* +X138051381Y-84267675D01* +X138045031Y-84370862D01* +X138047413Y-84425631D01* +X138060906Y-84467700D01* +X138102578Y-84499847D01* +X138183144Y-84510562D01* +X138264503Y-84500244D01* +X138305381Y-84469287D01* +X138320463Y-84427219D01* +X138322844Y-84373244D01* +X138316494Y-84267675D01* +X138472069Y-84267675D01* +X138553031Y-84259737D01* +X138597084Y-84217272D01* +X138611769Y-84131150D01* +X138601847Y-84049791D01* +X138572081Y-84008912D01* +X138533981Y-83993831D01* +X138480006Y-83991450D01* +X138316494Y-83991450D01* +X138322844Y-83939062D01* +X138302206Y-83875562D01* +X138260138Y-83853337D01* +X138165681Y-83845400D01* +X138073606Y-83868419D01* +X138046619Y-83926362D01* +X138051381Y-83991450D01* +X137816431Y-83991450D01* +X137709363Y-84000975D01* +X137625226Y-84029550D01* +X137564019Y-84077175D01* +X137522567Y-84143144D01* +X137497697Y-84226753D01* +X137489406Y-84328000D01* +X136796727Y-84328000D01* +X136796727Y-83618387D01* +X137489406Y-83618387D01* +X137499725Y-83699747D01* +X137530681Y-83740625D01* +X137572750Y-83755706D01* +X137627519Y-83758087D01* +X138183144Y-83758087D01* +X138229181Y-83756500D01* +X138297444Y-83727925D01* +X138324431Y-83619975D01* +X138324331Y-83619181D01* +X138438731Y-83619181D01* +X138448256Y-83699350D01* +X138480800Y-83741419D01* +X138522075Y-83755706D01* +X138576844Y-83758087D01* +X138631613Y-83755706D01* +X138673681Y-83740625D01* +X138705828Y-83700144D01* +X138716544Y-83619975D01* +X138705828Y-83538219D01* +X138673681Y-83496150D01* +X138633200Y-83482656D01* +X138578431Y-83480275D01* +X138523663Y-83482656D01* +X138481594Y-83496944D01* +X138448256Y-83539012D01* +X138438731Y-83619181D01* +X138324331Y-83619181D01* +X138314113Y-83538219D01* +X138283156Y-83496150D01* +X138241088Y-83482656D01* +X138186319Y-83480275D01* +X137629106Y-83480275D01* +X137573544Y-83482656D01* +X137532269Y-83496150D01* +X137500122Y-83537822D01* +X137489406Y-83618387D01* +X136796727Y-83618387D01* +X136796727Y-82892900D01* +X137489406Y-82892900D01* +X137499725Y-82973862D01* +X137530681Y-83016725D01* +X137572750Y-83031806D01* +X137627519Y-83034187D01* +X137960894Y-83034187D01* +X138033919Y-83071494D01* +X138064081Y-83151662D01* +X138051381Y-83220719D01* +X138038681Y-83275487D01* +X138099006Y-83362800D01* +X138210131Y-83392962D01* +X138283950Y-83373119D01* +X138316494Y-83323112D01* +X138329988Y-83267550D01* +X138333956Y-83204844D01* +X138306969Y-83118325D01* +X138264106Y-83054031D01* +X138237119Y-83031012D01* +X138289506Y-83013550D01* +X138316891Y-82971878D01* +X138326019Y-82894487D01* +X138315303Y-82812731D01* +X138283156Y-82770662D01* +X138242675Y-82757169D01* +X138187906Y-82754787D01* +X137630694Y-82754787D01* +X137584656Y-82754787D01* +X137516394Y-82783362D01* +X137489406Y-82892900D01* +X136796727Y-82892900D01* +X136796727Y-82488087D01* +X137489406Y-82488087D01* +X137499725Y-82569447D01* +X137530681Y-82610325D01* +X137572750Y-82625406D01* +X137627519Y-82627787D01* +X138183144Y-82627787D01* +X138229181Y-82626200D01* +X138297444Y-82597625D01* +X138324431Y-82489675D01* +X138324331Y-82488881D01* +X138438731Y-82488881D01* +X138448256Y-82569050D01* +X138480800Y-82611119D01* +X138522075Y-82625406D01* +X138576844Y-82627787D01* +X138631613Y-82625406D01* +X138673681Y-82610325D01* +X138705828Y-82569844D01* +X138716544Y-82489675D01* +X138705828Y-82407919D01* +X138673681Y-82365850D01* +X138633200Y-82352356D01* +X138578431Y-82349975D01* +X138523663Y-82352356D01* +X138481594Y-82366644D01* +X138448256Y-82408712D01* +X138438731Y-82488881D01* +X138324331Y-82488881D01* +X138314113Y-82407919D01* +X138283156Y-82365850D01* +X138241088Y-82352356D01* +X138186319Y-82349975D01* +X137629106Y-82349975D01* +X137573544Y-82352356D01* +X137532269Y-82365850D01* +X137500122Y-82407522D01* +X137489406Y-82488087D01* +X136796727Y-82488087D01* +X136796727Y-81562575D01* +X137127456Y-81562575D01* +X137136981Y-81640362D01* +X137169525Y-81680844D01* +X137210006Y-81695131D01* +X137263981Y-81697512D01* +X137584656Y-81697512D01* +X137529887Y-81774109D01* +X137511631Y-81886425D01* +X137525213Y-81971533D01* +X137565959Y-82053289D01* +X137633869Y-82131694D01* +X137719770Y-82195635D01* +X137814491Y-82233999D01* +X137918031Y-82246787D01* +X138021572Y-82233911D01* +X138116292Y-82195282D01* +X138202194Y-82130900D01* +X138270103Y-82052142D01* +X138310849Y-81970386D01* +X138324431Y-81885631D01* +X138303794Y-81773514D01* +X138241881Y-81695925D01* +X138304588Y-81661794D01* +X138326019Y-81548287D01* +X138315303Y-81479628D01* +X138283156Y-81441925D01* +X138243469Y-81428431D01* +X138189494Y-81426050D01* +X137262394Y-81426050D01* +X137208419Y-81428431D01* +X137168731Y-81442719D01* +X137136981Y-81483994D01* +X137127456Y-81562575D01* +X136796727Y-81562575D01* +X136796727Y-80950594D01* +G37* +%TO.C,C15*% +X163187748Y-68191000D02* +X163710252Y-68191000D01* +X163187748Y-66721000D02* +X163710252Y-66721000D01* +%TO.C,C11*% +X159515500Y-78142148D02* +X159515500Y-78664652D01* +X160985500Y-78142148D02* +X160985500Y-78664652D01* +%TO.C,C17*% +X162721552Y-61895000D02* +X162199048Y-61895000D01* +X162721552Y-63365000D02* +X162199048Y-63365000D01* +%TO.C,D3*% +X165079900Y-80296600D02* +X161819900Y-80296600D01* +X165079900Y-81996600D02* +X161819900Y-81996600D01* +X165079900Y-81996600D02* +X165079900Y-80296600D01* +%TO.C,R9*% +X158931300Y-62768736D02* +X158931300Y-63222864D01* +X160401300Y-62768736D02* +X160401300Y-63222864D01* +%TO.C,R3*% +X162182436Y-118845000D02* +X162636564Y-118845000D01* +X162182436Y-117375000D02* +X162636564Y-117375000D01* +%TO.C,R11*% +X149251936Y-70096000D02* +X149706064Y-70096000D01* +X149251936Y-68626000D02* +X149706064Y-68626000D01* +%TO.C,R101*% +X135409000Y-57049936D02* +X135409000Y-57504064D01* +X136879000Y-57049936D02* +X136879000Y-57504064D01* +%TO.C,R102*% +X135409000Y-60502436D02* +X135409000Y-60956564D01* +X136879000Y-60502436D02* +X136879000Y-60956564D01* +%TO.C,R105*% +X135409000Y-70765936D02* +X135409000Y-71220064D01* +X136879000Y-70765936D02* +X136879000Y-71220064D01* +%TO.C,R7*% +X148442936Y-75049000D02* +X148897064Y-75049000D01* +X148442936Y-73579000D02* +X148897064Y-73579000D01* +%TO.C,C10*% +X156083300Y-71131052D02* +X156083300Y-70608548D01* +X154613300Y-71131052D02* +X154613300Y-70608548D01* +%TO.C,R4*% +X162182436Y-121131000D02* +X162636564Y-121131000D01* +X162182436Y-119661000D02* +X162636564Y-119661000D01* +%TO.C,C1*% +X161459000Y-107908000D02* +X158609000Y-107908000D01* +X152739000Y-107908000D02* +X155589000Y-107908000D01* +X161459000Y-115563563D02* +X161459000Y-107908000D01* +X152739000Y-115563563D02* +X152739000Y-107908000D01* +X160394563Y-116628000D02* +X161459000Y-115563563D01* +X160394563Y-116628000D02* +X158609000Y-116628000D01* +X153803437Y-116628000D02* +X152739000Y-115563563D01* +X153803437Y-116628000D02* +X155589000Y-116628000D01* +X154089000Y-117368000D02* +X155089000Y-117368000D01* +X154589000Y-117868000D02* +X154589000Y-116868000D01* +%TO.C,J1*% +X146534500Y-122351800D02* +X158726500Y-122351800D01* +X158726500Y-122351800D02* +X158726500Y-124561600D01* +X158726500Y-124561600D02* +X146534500Y-124561600D01* +X146534500Y-124561600D02* +X146534500Y-122351800D01* +%TO.C,C13*% +X163554100Y-78152348D02* +X163554100Y-78674852D01* +X165024100Y-78152348D02* +X165024100Y-78674852D01* +%TO.C,C19*% +X149471748Y-59663000D02* +X149994252Y-59663000D01* +X149471748Y-58193000D02* +X149994252Y-58193000D01* +%TO.C,C7*% +X156125000Y-93006000D02* +X156125000Y-90156000D01* +X156125000Y-84286000D02* +X156125000Y-87136000D01* +X148469437Y-93006000D02* +X156125000Y-93006000D01* +X148469437Y-84286000D02* +X156125000Y-84286000D01* +X147405000Y-91941563D02* +X148469437Y-93006000D01* +X147405000Y-91941563D02* +X147405000Y-90156000D01* +X147405000Y-85350437D02* +X148469437Y-84286000D01* +X147405000Y-85350437D02* +X147405000Y-87136000D01* +X146665000Y-85636000D02* +X146665000Y-86636000D01* +X146165000Y-86136000D02* +X147165000Y-86136000D01* +%TO.C,R107*% +X140107936Y-74395000D02* +X140562064Y-74395000D01* +X140107936Y-72925000D02* +X140562064Y-72925000D01* +%TO.C,R1*% +X157229500Y-120145436D02* +X157229500Y-120599564D01* +X158699500Y-120145436D02* +X158699500Y-120599564D01* +%TO.C,D7*% +X161058000Y-65766000D02* +X164318000Y-65766000D01* +X161058000Y-64066000D02* +X164318000Y-64066000D01* +X161058000Y-64066000D02* +X161058000Y-65766000D01* +%TO.C,kibuzzard-640955F0*% +G36* +X147604163Y-126852892D02* +G01* +X146904075Y-126852892D01* +X146318288Y-126852892D01* +X146185996Y-126852892D01* +X146088381Y-126848096D01* +X145991707Y-126833756D01* +X145896904Y-126810009D01* +X145804885Y-126777084D01* +X145716536Y-126735298D01* +X145632708Y-126685054D01* +X145554209Y-126626835D01* +X145481794Y-126561202D01* +X145416161Y-126488787D01* +X145357942Y-126410288D01* +X145307698Y-126326460D01* +X145265912Y-126238111D01* +X145232987Y-126146092D01* +X145209240Y-126051289D01* +X145194900Y-125954614D01* +X145190104Y-125857000D01* +X145190962Y-125839537D01* +X146318288Y-125839537D01* +X146329202Y-125961130D01* +X146361944Y-126073495D01* +X146416514Y-126176633D01* +X146492913Y-126270544D01* +X146584095Y-126348679D01* +X146683016Y-126404489D01* +X146789676Y-126437975D01* +X146904075Y-126449137D01* +X147029091Y-126440505D01* +X147132455Y-126415800D01* +X147435888Y-126415800D01* +X147454144Y-126456281D01* +X147524788Y-126498350D01* +X147604163Y-126522163D01* +X147647819Y-126510256D01* +X147671631Y-126485650D01* +X147691475Y-126445963D01* +X148078823Y-125641100D01* +X148270913Y-125641100D01* +X148320919Y-125739525D01* +X148416963Y-125795088D01* +X148528088Y-125745875D01* +X148548725Y-125726825D01* +X148548725Y-126293562D01* +X148551106Y-126351506D01* +X148566188Y-126395163D01* +X148608653Y-126426119D01* +X148688425Y-126436437D01* +X148770181Y-126425722D01* +X148812250Y-126393575D01* +X148827331Y-126351506D01* +X148829713Y-126296738D01* +X148829713Y-125412500D01* +X148821775Y-125328362D01* +X148799550Y-125294231D01* +X148758275Y-125275975D01* +X148682869Y-125268037D01* +X148593175Y-125309312D01* +X148588413Y-125312487D01* +X148328063Y-125547438D01* +X148270913Y-125641100D01* +X148078823Y-125641100D01* +X148201063Y-125387100D01* +X148223288Y-125307725D01* +X148201856Y-125260497D01* +X148137563Y-125217237D01* +X148057394Y-125191837D01* +X148020088Y-125198187D01* +X147966113Y-125268037D01* +X147454938Y-126336425D01* +X147435888Y-126415800D01* +X147132455Y-126415800D01* +X147137438Y-126414609D01* +X147229116Y-126371449D01* +X147304125Y-126311025D01* +X147348575Y-126214187D01* +X147348575Y-125864937D01* +X147332700Y-125776037D01* +X147227925Y-125731587D01* +X146948525Y-125731587D01* +X146872325Y-125745875D01* +X146846131Y-125780800D01* +X146838988Y-125848269D01* +X146845338Y-125914944D01* +X146872325Y-125952250D01* +X146942175Y-125964950D01* +X147067588Y-125964950D01* +X147067588Y-126137988D01* +X146993372Y-126159419D01* +X146910425Y-126166562D01* +X146796125Y-126142552D01* +X146694525Y-126070519D01* +X146641608Y-126001903D01* +X146609858Y-125924116D01* +X146599275Y-125837156D01* +X146622691Y-125712934D01* +X146692938Y-125614906D01* +X146793347Y-125551208D01* +X146907250Y-125529975D01* +X146992975Y-125540889D01* +X147066000Y-125573631D01* +X147162838Y-125617287D01* +X147216416Y-125596253D01* +X147275550Y-125533150D01* +X147312063Y-125443456D01* +X147269200Y-125372812D01* +X147155782Y-125304021D01* +X147037778Y-125262746D01* +X146915188Y-125248987D01* +X146798506Y-125259554D01* +X146689763Y-125291255D01* +X146588956Y-125344089D01* +X146496088Y-125418056D01* +X146418300Y-125507800D01* +X146362738Y-125607961D01* +X146329400Y-125718540D01* +X146318288Y-125839537D01* +X145190962Y-125839537D01* +X145194900Y-125759386D01* +X145209240Y-125662711D01* +X145232987Y-125567908D01* +X145265912Y-125475889D01* +X145307698Y-125387540D01* +X145357942Y-125303712D01* +X145416161Y-125225213D01* +X145481794Y-125152798D01* +X145554209Y-125087165D01* +X145632708Y-125028946D01* +X145716536Y-124978702D01* +X145804885Y-124936916D01* +X145896904Y-124903991D01* +X145991707Y-124880244D01* +X146088381Y-124865904D01* +X146185996Y-124861108D01* +X146318288Y-124861108D01* +X148829713Y-124861108D01* +X148962004Y-124861108D01* +X149059619Y-124865904D01* +X149156293Y-124880244D01* +X149251096Y-124903991D01* +X149343115Y-124936916D01* +X149431464Y-124978702D01* +X149515292Y-125028946D01* +X149593791Y-125087165D01* +X149666206Y-125152798D01* +X149731839Y-125225213D01* +X149790058Y-125303712D01* +X149840302Y-125387540D01* +X149882088Y-125475889D01* +X149915013Y-125567908D01* +X149938760Y-125662711D01* +X149953100Y-125759386D01* +X149957896Y-125857000D01* +X149953100Y-125954614D01* +X149938760Y-126051289D01* +X149915013Y-126146092D01* +X149882088Y-126238111D01* +X149840302Y-126326460D01* +X149790058Y-126410288D01* +X149731839Y-126488787D01* +X149666206Y-126561202D01* +X149593791Y-126626835D01* +X149515292Y-126685054D01* +X149431464Y-126735298D01* +X149343115Y-126777084D01* +X149251096Y-126810009D01* +X149156293Y-126833756D01* +X149059619Y-126848096D01* +X148962004Y-126852892D01* +X148829713Y-126852892D01* +X148688425Y-126852892D01* +X147604163Y-126852892D01* +G37* +%TO.C,C9*% +X157692352Y-78313600D02* +X157169848Y-78313600D01* +X157692352Y-79783600D02* +X157169848Y-79783600D01* +%TO.C,D2*% +X160609500Y-81084000D02* +X157349500Y-81084000D01* +X160609500Y-82784000D02* +X157349500Y-82784000D01* +X160609500Y-82784000D02* +X160609500Y-81084000D01* +%TO.C,R13*% +X154786064Y-57123000D02* +X154331936Y-57123000D01* +X154786064Y-55653000D02* +X154331936Y-55653000D01* +%TO.C,R8*% +X157683564Y-76357800D02* +X157229436Y-76357800D01* +X157683564Y-77827800D02* +X157229436Y-77827800D01* +%TO.C,R103*% +X135409000Y-63907936D02* +X135409000Y-64362064D01* +X136879000Y-63907936D02* +X136879000Y-64362064D01* +%TO.C,D4*% +X165445700Y-77902200D02* +X165445700Y-81162200D01* +X167145700Y-77902200D02* +X167145700Y-81162200D01* +X167145700Y-77902200D02* +X165445700Y-77902200D01* +%TO.C,MK1*% +X140208000Y-55295800D02* +X152400000Y-55295800D01* +X152400000Y-55295800D02* +X152400000Y-57505600D01* +X152400000Y-57505600D02* +X140208000Y-57505600D01* +X140208000Y-57505600D02* +X140208000Y-55295800D01* +%TO.C,C18*% +X166343000Y-61748252D02* +X166343000Y-61225748D01* +X164873000Y-61748252D02* +X164873000Y-61225748D01* +%TO.C,R104*% +X135409000Y-67336936D02* +X135409000Y-67791064D01* +X136879000Y-67336936D02* +X136879000Y-67791064D01* +%TO.C,R108*% +X143536936Y-74395000D02* +X143991064Y-74395000D01* +X143536936Y-72925000D02* +X143991064Y-72925000D01* +%TO.C,D6*% +X166155000Y-65065000D02* +X166155000Y-68325000D01* +X167855000Y-65065000D02* +X167855000Y-68325000D01* +X167855000Y-65065000D02* +X166155000Y-65065000D01* +%TO.C,R109*% +X145261000Y-71220064D02* +X145261000Y-70765936D01* +X143791000Y-71220064D02* +X143791000Y-70765936D01* +%TO.C,C4*% +X164819000Y-90050252D02* +X164819000Y-89527748D01* +X163349000Y-90050252D02* +X163349000Y-89527748D01* +%TO.C,R106*% +X136655436Y-74395000D02* +X137109564Y-74395000D01* +X136655436Y-72925000D02* +X137109564Y-72925000D01* +%TO.C,C14*% +X165814700Y-70684748D02* +X165814700Y-71207252D01* +X167284700Y-70684748D02* +X167284700Y-71207252D01* +%TO.C,D5*% +X165826700Y-72974600D02* +X165826700Y-76234600D01* +X167526700Y-72974600D02* +X167526700Y-76234600D01* +X167526700Y-72974600D02* +X165826700Y-72974600D01* +%TO.C,C6*% +X150548000Y-81179252D02* +X150548000Y-80656748D01* +X149078000Y-81179252D02* +X149078000Y-80656748D01* +%TO.C,C2*% +X151807000Y-110321000D02* +X148957000Y-110321000D01* +X143087000Y-110321000D02* +X145937000Y-110321000D01* +X151807000Y-117976563D02* +X151807000Y-110321000D01* +X143087000Y-117976563D02* +X143087000Y-110321000D01* +X150742563Y-119041000D02* +X151807000Y-117976563D01* +X150742563Y-119041000D02* +X148957000Y-119041000D01* +X144151437Y-119041000D02* +X143087000Y-117976563D01* +X144151437Y-119041000D02* +X145937000Y-119041000D01* +X144437000Y-119781000D02* +X145437000Y-119781000D01* +X144937000Y-120281000D02* +X144937000Y-119281000D01* +%TO.C,C5*% +X143087000Y-104563000D02* +X145937000Y-104563000D01* +X151807000Y-104563000D02* +X148957000Y-104563000D01* +X143087000Y-96907437D02* +X143087000Y-104563000D01* +X151807000Y-96907437D02* +X151807000Y-104563000D01* +X144151437Y-95843000D02* +X143087000Y-96907437D01* +X144151437Y-95843000D02* +X145937000Y-95843000D01* +X150742563Y-95843000D02* +X151807000Y-96907437D01* +X150742563Y-95843000D02* +X148957000Y-95843000D01* +X150457000Y-95103000D02* +X149457000Y-95103000D01* +X149957000Y-94603000D02* +X149957000Y-95603000D01* +%TO.C,kibuzzard-640955DC*% +G36* +X157164088Y-126788598D02* +G01* +X157031796Y-126788598D01* +X156940483Y-126784112D01* +X156850050Y-126770698D01* +X156761367Y-126748484D01* +X156675289Y-126717684D01* +X156592644Y-126678596D01* +X156514228Y-126631595D01* +X156440796Y-126577135D01* +X156373057Y-126515739D01* +X156311661Y-126447999D01* +X156257200Y-126374568D01* +X156210200Y-126296152D01* +X156171112Y-126213507D01* +X156140312Y-126127429D01* +X156131226Y-126091156D01* +X157164088Y-126091156D01* +X157181550Y-126176881D01* +X157184725Y-126192756D01* +X157202188Y-126234031D01* +X157241478Y-126297134D01* +X157286325Y-126346744D01* +X157378047Y-126408480D01* +X157483881Y-126445522D01* +X157603825Y-126457869D01* +X157724651Y-126445610D01* +X157831014Y-126408833D01* +X157922913Y-126347537D01* +X157993468Y-126267369D01* +X158035801Y-126173971D01* +X158049913Y-126067344D01* +X158036816Y-125986381D01* +X157997525Y-125914944D01* +X157947519Y-125863350D01* +X157900688Y-125829219D01* +X157900688Y-125818106D01* +X157969479Y-125768276D01* +X158010754Y-125701337D01* +X158024513Y-125617287D01* +X158011989Y-125527770D01* +X157974418Y-125444426D01* +X157911800Y-125367256D01* +X157827486Y-125305520D01* +X157724828Y-125268478D01* +X157603825Y-125256131D01* +X157525045Y-125261687D01* +X157453806Y-125278356D01* +X157349031Y-125327569D01* +X157283150Y-125390275D01* +X157248225Y-125440281D01* +X157211713Y-125548231D01* +X157231556Y-125604984D01* +X157291088Y-125654594D01* +X157378400Y-125683169D01* +X157438725Y-125663325D01* +X157483175Y-125603794D01* +X157492700Y-125584744D01* +X157533975Y-125546644D01* +X157623669Y-125527594D01* +X157711775Y-125557756D01* +X157743525Y-125621256D01* +X157713363Y-125667691D01* +X157622875Y-125683169D01* +X157540325Y-125691106D01* +X157496272Y-125734366D01* +X157481588Y-125822869D01* +X157492303Y-125904228D01* +X157524450Y-125945106D01* +X157565725Y-125960981D01* +X157637956Y-125964156D01* +X157730031Y-125996700D01* +X157768925Y-126072106D01* +X157729238Y-126149100D01* +X157678438Y-126174698D01* +X157605413Y-126183231D01* +X157538738Y-126173706D01* +X157451425Y-126097506D01* +X157403800Y-126014956D01* +X157319663Y-125999081D01* +X157202981Y-126022100D01* +X157164088Y-126091156D01* +X156131226Y-126091156D01* +X156118098Y-126038746D01* +X156104684Y-125948313D01* +X156100198Y-125857000D01* +X156104684Y-125765687D01* +X156118098Y-125675254D01* +X156140312Y-125586571D01* +X156171112Y-125500493D01* +X156210200Y-125417848D01* +X156257200Y-125339432D01* +X156311661Y-125266001D01* +X156373057Y-125198261D01* +X156440796Y-125136865D01* +X156514228Y-125082405D01* +X156592644Y-125035404D01* +X156675289Y-124996316D01* +X156761367Y-124965516D01* +X156850050Y-124943302D01* +X156940483Y-124929888D01* +X157031796Y-124925402D01* +X157164088Y-124925402D01* +X158049913Y-124925402D01* +X158182204Y-124925402D01* +X158273517Y-124929888D01* +X158363950Y-124943302D01* +X158452633Y-124965516D01* +X158538711Y-124996316D01* +X158621356Y-125035404D01* +X158699772Y-125082405D01* +X158773204Y-125136865D01* +X158840943Y-125198261D01* +X158902339Y-125266001D01* +X158956800Y-125339432D01* +X159003800Y-125417848D01* +X159042888Y-125500493D01* +X159073688Y-125586571D01* +X159095902Y-125675254D01* +X159109316Y-125765687D01* +X159113802Y-125857000D01* +X159109316Y-125948313D01* +X159095902Y-126038746D01* +X159073688Y-126127429D01* +X159042888Y-126213507D01* +X159003800Y-126296152D01* +X158956800Y-126374568D01* +X158902339Y-126447999D01* +X158840943Y-126515739D01* +X158773204Y-126577135D01* +X158699772Y-126631595D01* +X158621356Y-126678596D01* +X158538711Y-126717684D01* +X158452633Y-126748484D01* +X158363950Y-126770698D01* +X158273517Y-126784112D01* +X158182204Y-126788598D01* +X158049913Y-126788598D01* +X157603825Y-126788598D01* +X157164088Y-126788598D01* +G37* +%TO.C,R110*% +X145261000Y-67791064D02* +X145261000Y-67336936D01* +X143791000Y-67791064D02* +X143791000Y-67336936D01* +%TO.C,U1*% +X146768500Y-64535000D02* +X146768500Y-66485000D01* +X146768500Y-64535000D02* +X146768500Y-62585000D01* +X151888500Y-64535000D02* +X151888500Y-66485000D01* +X151888500Y-64535000D02* +X151888500Y-61085000D01* +%TD*% +M02* diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Gerbers/StudioMic-NPTH-drl_map.gbr b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Gerbers/StudioMic-NPTH-drl_map.gbr new file mode 100755 index 0000000..b3c49dc --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Gerbers/StudioMic-NPTH-drl_map.gbr @@ -0,0 +1,1112 @@ +%TF.GenerationSoftware,KiCad,Pcbnew,(7.0.0)*% +%TF.CreationDate,2023-03-18T07:41:42+03:00*% +%TF.ProjectId,StudioMic,53747564-696f-44d6-9963-2e6b69636164,1*% +%TF.SameCoordinates,Original*% +%TF.FileFunction,Drillmap*% +%TF.FilePolarity,Positive*% +%FSLAX45Y45*% +G04 Gerber Fmt 4.5, Leading zero omitted, Abs format (unit mm)* +G04 Created by KiCad (PCBNEW (7.0.0)) date 2023-03-18 07:41:42* +%MOMM*% +%LPD*% +G01* +G04 APERTURE LIST* +%ADD10C,0.100000*% +%ADD11C,0.200000*% +%ADD12C,0.270000*% +G04 APERTURE END LIST* +D10* +X16964362Y-13014065D02* +X16973562Y-13014065D01* +X13862062Y-13309511D02* +G75* +G03* +X13566438Y-13013888I-295622J2D01* +G01* +X13566438Y-13013888D02* +X13557238Y-13013888D01* +X17309284Y-4937321D02* +G75* +G03* +X17181650Y-4809688I-127633J0D01* +G01* +X13347022Y-4809688D02* +G75* +G03* +X13219389Y-4937321I0J-127633D01* +G01* +X13219389Y-4937321D02* +X13557238Y-13013888D01* +X13347022Y-4809688D02* +X17181650Y-4809688D01* +X17309284Y-4937321D02* +X16973562Y-13014065D01* +X16964362Y-13014068D02* +G75* +G03* +X16668738Y-13309688I-2J-295622D01* +G01* +X13862061Y-13309511D02* +X16668738Y-13309688D01* +D11* +D12* +X13679361Y-5004688D02* +X13949361Y-5274688D01* +X13949361Y-5004688D02* +X13679361Y-5274688D01* +D11* +X13774361Y-5274688D02* +X13854361Y-5274688D01* +X13854361Y-5274688D02* +G75* +G03* +X13854361Y-5004688I0J135000D01* +G01* +X13854361Y-5004688D02* +X13774361Y-5004688D01* +X13774361Y-5004688D02* +G75* +G03* +X13774361Y-5274688I0J-135000D01* +G01* +D12* +X16579361Y-5004688D02* +X16849362Y-5274688D01* +X16849362Y-5004688D02* +X16579361Y-5274688D01* +D11* +X16674361Y-5274688D02* +X16754361Y-5274688D01* +X16754361Y-5274688D02* +G75* +G03* +X16754361Y-5004688I0J135000D01* +G01* +X16754361Y-5004688D02* +X16674361Y-5004688D01* +X16674361Y-5004688D02* +G75* +G03* +X16674361Y-5274688I0J-135000D01* +G01* +X13462008Y-13608164D02* +X13462008Y-13408164D01* +X13462008Y-13408164D02* +X13509627Y-13408164D01* +X13509627Y-13408164D02* +X13538199Y-13417688D01* +X13538199Y-13417688D02* +X13557246Y-13436736D01* +X13557246Y-13436736D02* +X13566770Y-13455784D01* +X13566770Y-13455784D02* +X13576294Y-13493879D01* +X13576294Y-13493879D02* +X13576294Y-13522450D01* +X13576294Y-13522450D02* +X13566770Y-13560545D01* +X13566770Y-13560545D02* +X13557246Y-13579593D01* +X13557246Y-13579593D02* +X13538199Y-13598641D01* +X13538199Y-13598641D02* +X13509627Y-13608164D01* +X13509627Y-13608164D02* +X13462008Y-13608164D01* +X13662008Y-13608164D02* +X13662008Y-13474831D01* +X13662008Y-13512926D02* +X13671532Y-13493879D01* +X13671532Y-13493879D02* +X13681056Y-13484355D01* +X13681056Y-13484355D02* +X13700103Y-13474831D01* +X13700103Y-13474831D02* +X13719151Y-13474831D01* +X13785818Y-13608164D02* +X13785818Y-13474831D01* +X13785818Y-13408164D02* +X13776294Y-13417688D01* +X13776294Y-13417688D02* +X13785818Y-13427212D01* +X13785818Y-13427212D02* +X13795341Y-13417688D01* +X13795341Y-13417688D02* +X13785818Y-13408164D01* +X13785818Y-13408164D02* +X13785818Y-13427212D01* +X13909627Y-13608164D02* +X13890579Y-13598641D01* +X13890579Y-13598641D02* +X13881056Y-13579593D01* +X13881056Y-13579593D02* +X13881056Y-13408164D01* +X14014389Y-13608164D02* +X13995341Y-13598641D01* +X13995341Y-13598641D02* +X13985818Y-13579593D01* +X13985818Y-13579593D02* +X13985818Y-13408164D01* +X14210579Y-13608164D02* +X14210579Y-13408164D01* +X14210579Y-13408164D02* +X14277246Y-13551022D01* +X14277246Y-13551022D02* +X14343913Y-13408164D01* +X14343913Y-13408164D02* +X14343913Y-13608164D01* +X14524865Y-13608164D02* +X14524865Y-13503403D01* +X14524865Y-13503403D02* +X14515341Y-13484355D01* +X14515341Y-13484355D02* +X14496294Y-13474831D01* +X14496294Y-13474831D02* +X14458198Y-13474831D01* +X14458198Y-13474831D02* +X14439151Y-13484355D01* +X14524865Y-13598641D02* +X14505818Y-13608164D01* +X14505818Y-13608164D02* +X14458198Y-13608164D01* +X14458198Y-13608164D02* +X14439151Y-13598641D01* +X14439151Y-13598641D02* +X14429627Y-13579593D01* +X14429627Y-13579593D02* +X14429627Y-13560545D01* +X14429627Y-13560545D02* +X14439151Y-13541498D01* +X14439151Y-13541498D02* +X14458198Y-13531974D01* +X14458198Y-13531974D02* +X14505818Y-13531974D01* +X14505818Y-13531974D02* +X14524865Y-13522450D01* +X14620103Y-13474831D02* +X14620103Y-13674831D01* +X14620103Y-13484355D02* +X14639151Y-13474831D01* +X14639151Y-13474831D02* +X14677246Y-13474831D01* +X14677246Y-13474831D02* +X14696294Y-13484355D01* +X14696294Y-13484355D02* +X14705818Y-13493879D01* +X14705818Y-13493879D02* +X14715341Y-13512926D01* +X14715341Y-13512926D02* +X14715341Y-13570069D01* +X14715341Y-13570069D02* +X14705818Y-13589117D01* +X14705818Y-13589117D02* +X14696294Y-13598641D01* +X14696294Y-13598641D02* +X14677246Y-13608164D01* +X14677246Y-13608164D02* +X14639151Y-13608164D01* +X14639151Y-13608164D02* +X14620103Y-13598641D01* +X14801056Y-13589117D02* +X14810579Y-13598641D01* +X14810579Y-13598641D02* +X14801056Y-13608164D01* +X14801056Y-13608164D02* +X14791532Y-13598641D01* +X14791532Y-13598641D02* +X14801056Y-13589117D01* +X14801056Y-13589117D02* +X14801056Y-13608164D01* +X14801056Y-13484355D02* +X14810579Y-13493879D01* +X14810579Y-13493879D02* +X14801056Y-13503403D01* +X14801056Y-13503403D02* +X14791532Y-13493879D01* +X14791532Y-13493879D02* +X14801056Y-13484355D01* +X14801056Y-13484355D02* +X14801056Y-13503403D01* +X13014389Y-13854688D02* +X13214389Y-14054688D01* +X13214389Y-13854688D02* +X13014389Y-14054688D01* +X13452484Y-13847212D02* +X13462008Y-13837688D01* +X13462008Y-13837688D02* +X13481056Y-13828164D01* +X13481056Y-13828164D02* +X13528675Y-13828164D01* +X13528675Y-13828164D02* +X13547722Y-13837688D01* +X13547722Y-13837688D02* +X13557246Y-13847212D01* +X13557246Y-13847212D02* +X13566770Y-13866260D01* +X13566770Y-13866260D02* +X13566770Y-13885307D01* +X13566770Y-13885307D02* +X13557246Y-13913879D01* +X13557246Y-13913879D02* +X13442960Y-14028164D01* +X13442960Y-14028164D02* +X13566770Y-14028164D01* +X13652484Y-14009117D02* +X13662008Y-14018641D01* +X13662008Y-14018641D02* +X13652484Y-14028164D01* +X13652484Y-14028164D02* +X13642960Y-14018641D01* +X13642960Y-14018641D02* +X13652484Y-14009117D01* +X13652484Y-14009117D02* +X13652484Y-14028164D01* +X13728675Y-13828164D02* +X13862008Y-13828164D01* +X13862008Y-13828164D02* +X13776294Y-14028164D01* +X13976294Y-13828164D02* +X13995341Y-13828164D01* +X13995341Y-13828164D02* +X14014389Y-13837688D01* +X14014389Y-13837688D02* +X14023913Y-13847212D01* +X14023913Y-13847212D02* +X14033437Y-13866260D01* +X14033437Y-13866260D02* +X14042960Y-13904355D01* +X14042960Y-13904355D02* +X14042960Y-13951974D01* +X14042960Y-13951974D02* +X14033437Y-13990069D01* +X14033437Y-13990069D02* +X14023913Y-14009117D01* +X14023913Y-14009117D02* +X14014389Y-14018641D01* +X14014389Y-14018641D02* +X13995341Y-14028164D01* +X13995341Y-14028164D02* +X13976294Y-14028164D01* +X13976294Y-14028164D02* +X13957246Y-14018641D01* +X13957246Y-14018641D02* +X13947722Y-14009117D01* +X13947722Y-14009117D02* +X13938199Y-13990069D01* +X13938199Y-13990069D02* +X13928675Y-13951974D01* +X13928675Y-13951974D02* +X13928675Y-13904355D01* +X13928675Y-13904355D02* +X13938199Y-13866260D01* +X13938199Y-13866260D02* +X13947722Y-13847212D01* +X13947722Y-13847212D02* +X13957246Y-13837688D01* +X13957246Y-13837688D02* +X13976294Y-13828164D01* +X14166770Y-13828164D02* +X14185818Y-13828164D01* +X14185818Y-13828164D02* +X14204865Y-13837688D01* +X14204865Y-13837688D02* +X14214389Y-13847212D01* +X14214389Y-13847212D02* +X14223913Y-13866260D01* +X14223913Y-13866260D02* +X14233437Y-13904355D01* +X14233437Y-13904355D02* +X14233437Y-13951974D01* +X14233437Y-13951974D02* +X14223913Y-13990069D01* +X14223913Y-13990069D02* +X14214389Y-14009117D01* +X14214389Y-14009117D02* +X14204865Y-14018641D01* +X14204865Y-14018641D02* +X14185818Y-14028164D01* +X14185818Y-14028164D02* +X14166770Y-14028164D01* +X14166770Y-14028164D02* +X14147722Y-14018641D01* +X14147722Y-14018641D02* +X14138199Y-14009117D01* +X14138199Y-14009117D02* +X14128675Y-13990069D01* +X14128675Y-13990069D02* +X14119151Y-13951974D01* +X14119151Y-13951974D02* +X14119151Y-13904355D01* +X14119151Y-13904355D02* +X14128675Y-13866260D01* +X14128675Y-13866260D02* +X14138199Y-13847212D01* +X14138199Y-13847212D02* +X14147722Y-13837688D01* +X14147722Y-13837688D02* +X14166770Y-13828164D01* +X14319151Y-14028164D02* +X14319151Y-13894831D01* +X14319151Y-13913879D02* +X14328675Y-13904355D01* +X14328675Y-13904355D02* +X14347722Y-13894831D01* +X14347722Y-13894831D02* +X14376294Y-13894831D01* +X14376294Y-13894831D02* +X14395341Y-13904355D01* +X14395341Y-13904355D02* +X14404865Y-13923403D01* +X14404865Y-13923403D02* +X14404865Y-14028164D01* +X14404865Y-13923403D02* +X14414389Y-13904355D01* +X14414389Y-13904355D02* +X14433437Y-13894831D01* +X14433437Y-13894831D02* +X14462008Y-13894831D01* +X14462008Y-13894831D02* +X14481056Y-13904355D01* +X14481056Y-13904355D02* +X14490580Y-13923403D01* +X14490580Y-13923403D02* +X14490580Y-14028164D01* +X14585818Y-14028164D02* +X14585818Y-13894831D01* +X14585818Y-13913879D02* +X14595341Y-13904355D01* +X14595341Y-13904355D02* +X14614389Y-13894831D01* +X14614389Y-13894831D02* +X14642961Y-13894831D01* +X14642961Y-13894831D02* +X14662008Y-13904355D01* +X14662008Y-13904355D02* +X14671532Y-13923403D01* +X14671532Y-13923403D02* +X14671532Y-14028164D01* +X14671532Y-13923403D02* +X14681056Y-13904355D01* +X14681056Y-13904355D02* +X14700103Y-13894831D01* +X14700103Y-13894831D02* +X14728675Y-13894831D01* +X14728675Y-13894831D02* +X14747722Y-13904355D01* +X14747722Y-13904355D02* +X14757246Y-13923403D01* +X14757246Y-13923403D02* +X14757246Y-14028164D01* +X15115341Y-13818641D02* +X14943913Y-14075784D01* +X15340103Y-13828164D02* +X15359151Y-13828164D01* +X15359151Y-13828164D02* +X15378199Y-13837688D01* +X15378199Y-13837688D02* +X15387722Y-13847212D01* +X15387722Y-13847212D02* +X15397246Y-13866260D01* +X15397246Y-13866260D02* +X15406770Y-13904355D01* +X15406770Y-13904355D02* +X15406770Y-13951974D01* +X15406770Y-13951974D02* +X15397246Y-13990069D01* +X15397246Y-13990069D02* +X15387722Y-14009117D01* +X15387722Y-14009117D02* +X15378199Y-14018641D01* +X15378199Y-14018641D02* +X15359151Y-14028164D01* +X15359151Y-14028164D02* +X15340103Y-14028164D01* +X15340103Y-14028164D02* +X15321056Y-14018641D01* +X15321056Y-14018641D02* +X15311532Y-14009117D01* +X15311532Y-14009117D02* +X15302008Y-13990069D01* +X15302008Y-13990069D02* +X15292484Y-13951974D01* +X15292484Y-13951974D02* +X15292484Y-13904355D01* +X15292484Y-13904355D02* +X15302008Y-13866260D01* +X15302008Y-13866260D02* +X15311532Y-13847212D01* +X15311532Y-13847212D02* +X15321056Y-13837688D01* +X15321056Y-13837688D02* +X15340103Y-13828164D01* +X15492484Y-14009117D02* +X15502008Y-14018641D01* +X15502008Y-14018641D02* +X15492484Y-14028164D01* +X15492484Y-14028164D02* +X15482961Y-14018641D01* +X15482961Y-14018641D02* +X15492484Y-14009117D01* +X15492484Y-14009117D02* +X15492484Y-14028164D01* +X15692484Y-14028164D02* +X15578199Y-14028164D01* +X15635341Y-14028164D02* +X15635341Y-13828164D01* +X15635341Y-13828164D02* +X15616294Y-13856736D01* +X15616294Y-13856736D02* +X15597246Y-13875784D01* +X15597246Y-13875784D02* +X15578199Y-13885307D01* +X15816294Y-13828164D02* +X15835342Y-13828164D01* +X15835342Y-13828164D02* +X15854389Y-13837688D01* +X15854389Y-13837688D02* +X15863913Y-13847212D01* +X15863913Y-13847212D02* +X15873437Y-13866260D01* +X15873437Y-13866260D02* +X15882961Y-13904355D01* +X15882961Y-13904355D02* +X15882961Y-13951974D01* +X15882961Y-13951974D02* +X15873437Y-13990069D01* +X15873437Y-13990069D02* +X15863913Y-14009117D01* +X15863913Y-14009117D02* +X15854389Y-14018641D01* +X15854389Y-14018641D02* +X15835342Y-14028164D01* +X15835342Y-14028164D02* +X15816294Y-14028164D01* +X15816294Y-14028164D02* +X15797246Y-14018641D01* +X15797246Y-14018641D02* +X15787722Y-14009117D01* +X15787722Y-14009117D02* +X15778199Y-13990069D01* +X15778199Y-13990069D02* +X15768675Y-13951974D01* +X15768675Y-13951974D02* +X15768675Y-13904355D01* +X15768675Y-13904355D02* +X15778199Y-13866260D01* +X15778199Y-13866260D02* +X15787722Y-13847212D01* +X15787722Y-13847212D02* +X15797246Y-13837688D01* +X15797246Y-13837688D02* +X15816294Y-13828164D01* +X16054389Y-13828164D02* +X16016294Y-13828164D01* +X16016294Y-13828164D02* +X15997246Y-13837688D01* +X15997246Y-13837688D02* +X15987722Y-13847212D01* +X15987722Y-13847212D02* +X15968675Y-13875784D01* +X15968675Y-13875784D02* +X15959151Y-13913879D01* +X15959151Y-13913879D02* +X15959151Y-13990069D01* +X15959151Y-13990069D02* +X15968675Y-14009117D01* +X15968675Y-14009117D02* +X15978199Y-14018641D01* +X15978199Y-14018641D02* +X15997246Y-14028164D01* +X15997246Y-14028164D02* +X16035342Y-14028164D01* +X16035342Y-14028164D02* +X16054389Y-14018641D01* +X16054389Y-14018641D02* +X16063913Y-14009117D01* +X16063913Y-14009117D02* +X16073437Y-13990069D01* +X16073437Y-13990069D02* +X16073437Y-13942450D01* +X16073437Y-13942450D02* +X16063913Y-13923403D01* +X16063913Y-13923403D02* +X16054389Y-13913879D01* +X16054389Y-13913879D02* +X16035342Y-13904355D01* +X16035342Y-13904355D02* +X15997246Y-13904355D01* +X15997246Y-13904355D02* +X15978199Y-13913879D01* +X15978199Y-13913879D02* +X15968675Y-13923403D01* +X15968675Y-13923403D02* +X15959151Y-13942450D01* +X16140103Y-13828164D02* +X16263913Y-13828164D01* +X16263913Y-13828164D02* +X16197246Y-13904355D01* +X16197246Y-13904355D02* +X16225818Y-13904355D01* +X16225818Y-13904355D02* +X16244865Y-13913879D01* +X16244865Y-13913879D02* +X16254389Y-13923403D01* +X16254389Y-13923403D02* +X16263913Y-13942450D01* +X16263913Y-13942450D02* +X16263913Y-13990069D01* +X16263913Y-13990069D02* +X16254389Y-14009117D01* +X16254389Y-14009117D02* +X16244865Y-14018641D01* +X16244865Y-14018641D02* +X16225818Y-14028164D01* +X16225818Y-14028164D02* +X16168675Y-14028164D01* +X16168675Y-14028164D02* +X16149627Y-14018641D01* +X16149627Y-14018641D02* +X16140103Y-14009117D01* +X16340103Y-13828164D02* +X16340103Y-13866260D01* +X16416294Y-13828164D02* +X16416294Y-13866260D01* +X16679151Y-14104355D02* +X16669627Y-14094831D01* +X16669627Y-14094831D02* +X16650580Y-14066260D01* +X16650580Y-14066260D02* +X16641056Y-14047212D01* +X16641056Y-14047212D02* +X16631532Y-14018641D01* +X16631532Y-14018641D02* +X16622008Y-13971022D01* +X16622008Y-13971022D02* +X16622008Y-13932926D01* +X16622008Y-13932926D02* +X16631532Y-13885307D01* +X16631532Y-13885307D02* +X16641056Y-13856736D01* +X16641056Y-13856736D02* +X16650580Y-13837688D01* +X16650580Y-13837688D02* +X16669627Y-13809117D01* +X16669627Y-13809117D02* +X16679151Y-13799593D01* +X16793437Y-13828164D02* +X16812485Y-13828164D01* +X16812485Y-13828164D02* +X16831532Y-13837688D01* +X16831532Y-13837688D02* +X16841056Y-13847212D01* +X16841056Y-13847212D02* +X16850580Y-13866260D01* +X16850580Y-13866260D02* +X16860104Y-13904355D01* +X16860104Y-13904355D02* +X16860104Y-13951974D01* +X16860104Y-13951974D02* +X16850580Y-13990069D01* +X16850580Y-13990069D02* +X16841056Y-14009117D01* +X16841056Y-14009117D02* +X16831532Y-14018641D01* +X16831532Y-14018641D02* +X16812485Y-14028164D01* +X16812485Y-14028164D02* +X16793437Y-14028164D01* +X16793437Y-14028164D02* +X16774389Y-14018641D01* +X16774389Y-14018641D02* +X16764865Y-14009117D01* +X16764865Y-14009117D02* +X16755342Y-13990069D01* +X16755342Y-13990069D02* +X16745818Y-13951974D01* +X16745818Y-13951974D02* +X16745818Y-13904355D01* +X16745818Y-13904355D02* +X16755342Y-13866260D01* +X16755342Y-13866260D02* +X16764865Y-13847212D01* +X16764865Y-13847212D02* +X16774389Y-13837688D01* +X16774389Y-13837688D02* +X16793437Y-13828164D01* +X17065818Y-14028164D02* +X17065818Y-13828164D01* +X17151532Y-14028164D02* +X17151532Y-13923403D01* +X17151532Y-13923403D02* +X17142008Y-13904355D01* +X17142008Y-13904355D02* +X17122961Y-13894831D01* +X17122961Y-13894831D02* +X17094389Y-13894831D01* +X17094389Y-13894831D02* +X17075342Y-13904355D01* +X17075342Y-13904355D02* +X17065818Y-13913879D01* +X17275342Y-14028164D02* +X17256294Y-14018641D01* +X17256294Y-14018641D02* +X17246770Y-14009117D01* +X17246770Y-14009117D02* +X17237246Y-13990069D01* +X17237246Y-13990069D02* +X17237246Y-13932926D01* +X17237246Y-13932926D02* +X17246770Y-13913879D01* +X17246770Y-13913879D02* +X17256294Y-13904355D01* +X17256294Y-13904355D02* +X17275342Y-13894831D01* +X17275342Y-13894831D02* +X17303913Y-13894831D01* +X17303913Y-13894831D02* +X17322961Y-13904355D01* +X17322961Y-13904355D02* +X17332485Y-13913879D01* +X17332485Y-13913879D02* +X17342008Y-13932926D01* +X17342008Y-13932926D02* +X17342008Y-13990069D01* +X17342008Y-13990069D02* +X17332485Y-14009117D01* +X17332485Y-14009117D02* +X17322961Y-14018641D01* +X17322961Y-14018641D02* +X17303913Y-14028164D01* +X17303913Y-14028164D02* +X17275342Y-14028164D01* +X17456294Y-14028164D02* +X17437246Y-14018641D01* +X17437246Y-14018641D02* +X17427723Y-13999593D01* +X17427723Y-13999593D02* +X17427723Y-13828164D01* +X17608675Y-14018641D02* +X17589627Y-14028164D01* +X17589627Y-14028164D02* +X17551532Y-14028164D01* +X17551532Y-14028164D02* +X17532485Y-14018641D01* +X17532485Y-14018641D02* +X17522961Y-13999593D01* +X17522961Y-13999593D02* +X17522961Y-13923403D01* +X17522961Y-13923403D02* +X17532485Y-13904355D01* +X17532485Y-13904355D02* +X17551532Y-13894831D01* +X17551532Y-13894831D02* +X17589627Y-13894831D01* +X17589627Y-13894831D02* +X17608675Y-13904355D01* +X17608675Y-13904355D02* +X17618199Y-13923403D01* +X17618199Y-13923403D02* +X17618199Y-13942450D01* +X17618199Y-13942450D02* +X17522961Y-13961498D01* +X17694389Y-14018641D02* +X17713437Y-14028164D01* +X17713437Y-14028164D02* +X17751532Y-14028164D01* +X17751532Y-14028164D02* +X17770580Y-14018641D01* +X17770580Y-14018641D02* +X17780104Y-13999593D01* +X17780104Y-13999593D02* +X17780104Y-13990069D01* +X17780104Y-13990069D02* +X17770580Y-13971022D01* +X17770580Y-13971022D02* +X17751532Y-13961498D01* +X17751532Y-13961498D02* +X17722961Y-13961498D01* +X17722961Y-13961498D02* +X17703913Y-13951974D01* +X17703913Y-13951974D02* +X17694389Y-13932926D01* +X17694389Y-13932926D02* +X17694389Y-13923403D01* +X17694389Y-13923403D02* +X17703913Y-13904355D01* +X17703913Y-13904355D02* +X17722961Y-13894831D01* +X17722961Y-13894831D02* +X17751532Y-13894831D01* +X17751532Y-13894831D02* +X17770580Y-13904355D01* +X17985818Y-13951974D02* +X18138199Y-13951974D01* +X18062008Y-14028164D02* +X18062008Y-13875784D01* +X18343913Y-13847212D02* +X18353437Y-13837688D01* +X18353437Y-13837688D02* +X18372485Y-13828164D01* +X18372485Y-13828164D02* +X18420104Y-13828164D01* +X18420104Y-13828164D02* +X18439151Y-13837688D01* +X18439151Y-13837688D02* +X18448675Y-13847212D01* +X18448675Y-13847212D02* +X18458199Y-13866260D01* +X18458199Y-13866260D02* +X18458199Y-13885307D01* +X18458199Y-13885307D02* +X18448675Y-13913879D01* +X18448675Y-13913879D02* +X18334389Y-14028164D01* +X18334389Y-14028164D02* +X18458199Y-14028164D01* +X18654389Y-14018641D02* +X18673437Y-14028164D01* +X18673437Y-14028164D02* +X18711532Y-14028164D01* +X18711532Y-14028164D02* +X18730580Y-14018641D01* +X18730580Y-14018641D02* +X18740104Y-13999593D01* +X18740104Y-13999593D02* +X18740104Y-13990069D01* +X18740104Y-13990069D02* +X18730580Y-13971022D01* +X18730580Y-13971022D02* +X18711532Y-13961498D01* +X18711532Y-13961498D02* +X18682961Y-13961498D01* +X18682961Y-13961498D02* +X18663913Y-13951974D01* +X18663913Y-13951974D02* +X18654389Y-13932926D01* +X18654389Y-13932926D02* +X18654389Y-13923403D01* +X18654389Y-13923403D02* +X18663913Y-13904355D01* +X18663913Y-13904355D02* +X18682961Y-13894831D01* +X18682961Y-13894831D02* +X18711532Y-13894831D01* +X18711532Y-13894831D02* +X18730580Y-13904355D01* +X18854389Y-14028164D02* +X18835342Y-14018641D01* +X18835342Y-14018641D02* +X18825818Y-13999593D01* +X18825818Y-13999593D02* +X18825818Y-13828164D01* +X18959151Y-14028164D02* +X18940104Y-14018641D01* +X18940104Y-14018641D02* +X18930580Y-14009117D01* +X18930580Y-14009117D02* +X18921056Y-13990069D01* +X18921056Y-13990069D02* +X18921056Y-13932926D01* +X18921056Y-13932926D02* +X18930580Y-13913879D01* +X18930580Y-13913879D02* +X18940104Y-13904355D01* +X18940104Y-13904355D02* +X18959151Y-13894831D01* +X18959151Y-13894831D02* +X18987723Y-13894831D01* +X18987723Y-13894831D02* +X19006770Y-13904355D01* +X19006770Y-13904355D02* +X19016294Y-13913879D01* +X19016294Y-13913879D02* +X19025818Y-13932926D01* +X19025818Y-13932926D02* +X19025818Y-13990069D01* +X19025818Y-13990069D02* +X19016294Y-14009117D01* +X19016294Y-14009117D02* +X19006770Y-14018641D01* +X19006770Y-14018641D02* +X18987723Y-14028164D01* +X18987723Y-14028164D02* +X18959151Y-14028164D01* +X19082961Y-13894831D02* +X19159151Y-13894831D01* +X19111532Y-13828164D02* +X19111532Y-13999593D01* +X19111532Y-13999593D02* +X19121056Y-14018641D01* +X19121056Y-14018641D02* +X19140104Y-14028164D01* +X19140104Y-14028164D02* +X19159151Y-14028164D01* +X19216294Y-14018641D02* +X19235342Y-14028164D01* +X19235342Y-14028164D02* +X19273437Y-14028164D01* +X19273437Y-14028164D02* +X19292485Y-14018641D01* +X19292485Y-14018641D02* +X19302008Y-13999593D01* +X19302008Y-13999593D02* +X19302008Y-13990069D01* +X19302008Y-13990069D02* +X19292485Y-13971022D01* +X19292485Y-13971022D02* +X19273437Y-13961498D01* +X19273437Y-13961498D02* +X19244866Y-13961498D01* +X19244866Y-13961498D02* +X19225818Y-13951974D01* +X19225818Y-13951974D02* +X19216294Y-13932926D01* +X19216294Y-13932926D02* +X19216294Y-13923403D01* +X19216294Y-13923403D02* +X19225818Y-13904355D01* +X19225818Y-13904355D02* +X19244866Y-13894831D01* +X19244866Y-13894831D02* +X19273437Y-13894831D01* +X19273437Y-13894831D02* +X19292485Y-13904355D01* +X19368675Y-14104355D02* +X19378199Y-14094831D01* +X19378199Y-14094831D02* +X19397247Y-14066260D01* +X19397247Y-14066260D02* +X19406770Y-14047212D01* +X19406770Y-14047212D02* +X19416294Y-14018641D01* +X19416294Y-14018641D02* +X19425818Y-13971022D01* +X19425818Y-13971022D02* +X19425818Y-13932926D01* +X19425818Y-13932926D02* +X19416294Y-13885307D01* +X19416294Y-13885307D02* +X19406770Y-13856736D01* +X19406770Y-13856736D02* +X19397247Y-13837688D01* +X19397247Y-13837688D02* +X19378199Y-13809117D01* +X19378199Y-13809117D02* +X19368675Y-13799593D01* +X19698199Y-14104355D02* +X19688675Y-14094831D01* +X19688675Y-14094831D02* +X19669627Y-14066260D01* +X19669627Y-14066260D02* +X19660104Y-14047212D01* +X19660104Y-14047212D02* +X19650580Y-14018641D01* +X19650580Y-14018641D02* +X19641056Y-13971022D01* +X19641056Y-13971022D02* +X19641056Y-13932926D01* +X19641056Y-13932926D02* +X19650580Y-13885307D01* +X19650580Y-13885307D02* +X19660104Y-13856736D01* +X19660104Y-13856736D02* +X19669627Y-13837688D01* +X19669627Y-13837688D02* +X19688675Y-13809117D01* +X19688675Y-13809117D02* +X19698199Y-13799593D01* +X19774389Y-13894831D02* +X19774389Y-14028164D01* +X19774389Y-13913879D02* +X19783913Y-13904355D01* +X19783913Y-13904355D02* +X19802961Y-13894831D01* +X19802961Y-13894831D02* +X19831532Y-13894831D01* +X19831532Y-13894831D02* +X19850580Y-13904355D01* +X19850580Y-13904355D02* +X19860104Y-13923403D01* +X19860104Y-13923403D02* +X19860104Y-14028164D01* +X19983913Y-14028164D02* +X19964866Y-14018641D01* +X19964866Y-14018641D02* +X19955342Y-14009117D01* +X19955342Y-14009117D02* +X19945818Y-13990069D01* +X19945818Y-13990069D02* +X19945818Y-13932926D01* +X19945818Y-13932926D02* +X19955342Y-13913879D01* +X19955342Y-13913879D02* +X19964866Y-13904355D01* +X19964866Y-13904355D02* +X19983913Y-13894831D01* +X19983913Y-13894831D02* +X20012485Y-13894831D01* +X20012485Y-13894831D02* +X20031532Y-13904355D01* +X20031532Y-13904355D02* +X20041056Y-13913879D01* +X20041056Y-13913879D02* +X20050580Y-13932926D01* +X20050580Y-13932926D02* +X20050580Y-13990069D01* +X20050580Y-13990069D02* +X20041056Y-14009117D01* +X20041056Y-14009117D02* +X20031532Y-14018641D01* +X20031532Y-14018641D02* +X20012485Y-14028164D01* +X20012485Y-14028164D02* +X19983913Y-14028164D01* +X20107723Y-13894831D02* +X20183913Y-13894831D01* +X20136294Y-13828164D02* +X20136294Y-13999593D01* +X20136294Y-13999593D02* +X20145818Y-14018641D01* +X20145818Y-14018641D02* +X20164866Y-14028164D01* +X20164866Y-14028164D02* +X20183913Y-14028164D01* +X20370580Y-13894831D02* +X20370580Y-14094831D01* +X20370580Y-13904355D02* +X20389627Y-13894831D01* +X20389627Y-13894831D02* +X20427723Y-13894831D01* +X20427723Y-13894831D02* +X20446770Y-13904355D01* +X20446770Y-13904355D02* +X20456294Y-13913879D01* +X20456294Y-13913879D02* +X20465818Y-13932926D01* +X20465818Y-13932926D02* +X20465818Y-13990069D01* +X20465818Y-13990069D02* +X20456294Y-14009117D01* +X20456294Y-14009117D02* +X20446770Y-14018641D01* +X20446770Y-14018641D02* +X20427723Y-14028164D01* +X20427723Y-14028164D02* +X20389627Y-14028164D01* +X20389627Y-14028164D02* +X20370580Y-14018641D01* +X20580104Y-14028164D02* +X20561056Y-14018641D01* +X20561056Y-14018641D02* +X20551532Y-13999593D01* +X20551532Y-13999593D02* +X20551532Y-13828164D01* +X20742008Y-14028164D02* +X20742008Y-13923403D01* +X20742008Y-13923403D02* +X20732485Y-13904355D01* +X20732485Y-13904355D02* +X20713437Y-13894831D01* +X20713437Y-13894831D02* +X20675342Y-13894831D01* +X20675342Y-13894831D02* +X20656294Y-13904355D01* +X20742008Y-14018641D02* +X20722961Y-14028164D01* +X20722961Y-14028164D02* +X20675342Y-14028164D01* +X20675342Y-14028164D02* +X20656294Y-14018641D01* +X20656294Y-14018641D02* +X20646770Y-13999593D01* +X20646770Y-13999593D02* +X20646770Y-13980545D01* +X20646770Y-13980545D02* +X20656294Y-13961498D01* +X20656294Y-13961498D02* +X20675342Y-13951974D01* +X20675342Y-13951974D02* +X20722961Y-13951974D01* +X20722961Y-13951974D02* +X20742008Y-13942450D01* +X20808675Y-13894831D02* +X20884866Y-13894831D01* +X20837247Y-13828164D02* +X20837247Y-13999593D01* +X20837247Y-13999593D02* +X20846770Y-14018641D01* +X20846770Y-14018641D02* +X20865818Y-14028164D01* +X20865818Y-14028164D02* +X20884866Y-14028164D01* +X21027723Y-14018641D02* +X21008675Y-14028164D01* +X21008675Y-14028164D02* +X20970580Y-14028164D01* +X20970580Y-14028164D02* +X20951532Y-14018641D01* +X20951532Y-14018641D02* +X20942008Y-13999593D01* +X20942008Y-13999593D02* +X20942008Y-13923403D01* +X20942008Y-13923403D02* +X20951532Y-13904355D01* +X20951532Y-13904355D02* +X20970580Y-13894831D01* +X20970580Y-13894831D02* +X21008675Y-13894831D01* +X21008675Y-13894831D02* +X21027723Y-13904355D01* +X21027723Y-13904355D02* +X21037247Y-13923403D01* +X21037247Y-13923403D02* +X21037247Y-13942450D01* +X21037247Y-13942450D02* +X20942008Y-13961498D01* +X21208675Y-14028164D02* +X21208675Y-13828164D01* +X21208675Y-14018641D02* +X21189628Y-14028164D01* +X21189628Y-14028164D02* +X21151532Y-14028164D01* +X21151532Y-14028164D02* +X21132485Y-14018641D01* +X21132485Y-14018641D02* +X21122961Y-14009117D01* +X21122961Y-14009117D02* +X21113437Y-13990069D01* +X21113437Y-13990069D02* +X21113437Y-13932926D01* +X21113437Y-13932926D02* +X21122961Y-13913879D01* +X21122961Y-13913879D02* +X21132485Y-13904355D01* +X21132485Y-13904355D02* +X21151532Y-13894831D01* +X21151532Y-13894831D02* +X21189628Y-13894831D01* +X21189628Y-13894831D02* +X21208675Y-13904355D01* +X21284866Y-14104355D02* +X21294389Y-14094831D01* +X21294389Y-14094831D02* +X21313437Y-14066260D01* +X21313437Y-14066260D02* +X21322961Y-14047212D01* +X21322961Y-14047212D02* +X21332485Y-14018641D01* +X21332485Y-14018641D02* +X21342008Y-13971022D01* +X21342008Y-13971022D02* +X21342008Y-13932926D01* +X21342008Y-13932926D02* +X21332485Y-13885307D01* +X21332485Y-13885307D02* +X21322961Y-13856736D01* +X21322961Y-13856736D02* +X21313437Y-13837688D01* +X21313437Y-13837688D02* +X21294389Y-13809117D01* +X21294389Y-13809117D02* +X21284866Y-13799593D01* +M02* diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Gerbers/StudioMic-NPTH.drl b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Gerbers/StudioMic-NPTH.drl new file mode 100755 index 0000000..2ba5eaf --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Gerbers/StudioMic-NPTH.drl @@ -0,0 +1,26 @@ +M48 +; DRILL file {KiCad (7.0.0)} date Sat Mar 18 07:41:42 2023 +; FORMAT={-:-/ absolute / metric / decimal} +; #@! TF.CreationDate,2023-03-18T07:41:42+03:00 +; #@! TF.GenerationSoftware,Kicad,Pcbnew,(7.0.0) +; #@! TF.FileFunction,NonPlated,1,2,NPTH +FMAT,2 +METRIC +; #@! TA.AperFunction,NonPlated,NPTH,ComponentDrill +T1C2.700 +% +G90 +G05 +T1 +G00X137.744Y-51.397 +M15 +G01X138.544Y-51.397 +M16 +G05 +G00X166.744Y-51.397 +M15 +G01X167.544Y-51.397 +M16 +G05 +T0 +M30 diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Gerbers/StudioMic-PTH-drl_map.gbr b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Gerbers/StudioMic-PTH-drl_map.gbr new file mode 100755 index 0000000..6df8446 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Gerbers/StudioMic-PTH-drl_map.gbr @@ -0,0 +1,787 @@ +%TF.GenerationSoftware,KiCad,Pcbnew,(7.0.0)*% +%TF.CreationDate,2023-03-18T07:41:42+03:00*% +%TF.ProjectId,StudioMic,53747564-696f-44d6-9963-2e6b69636164,1*% +%TF.SameCoordinates,Original*% +%TF.FileFunction,Drillmap*% +%TF.FilePolarity,Positive*% +%FSLAX45Y45*% +G04 Gerber Fmt 4.5, Leading zero omitted, Abs format (unit mm)* +G04 Created by KiCad (PCBNEW (7.0.0)) date 2023-03-18 07:41:42* +%MOMM*% +%LPD*% +G01* +G04 APERTURE LIST* +%ADD10C,0.100000*% +%ADD11C,0.200000*% +G04 APERTURE END LIST* +D10* +X16964362Y-13014065D02* +X16973562Y-13014065D01* +X13862062Y-13309511D02* +G75* +G03* +X13566438Y-13013888I-295622J2D01* +G01* +X13566438Y-13013888D02* +X13557238Y-13013888D01* +X17309284Y-4937321D02* +G75* +G03* +X17181650Y-4809688I-127633J0D01* +G01* +X13347022Y-4809688D02* +G75* +G03* +X13219389Y-4937321I0J-127633D01* +G01* +X13219389Y-4937321D02* +X13557238Y-13013888D01* +X13347022Y-4809688D02* +X17181650Y-4809688D01* +X17309284Y-4937321D02* +X16973562Y-13014065D01* +X16964362Y-13014068D02* +G75* +G03* +X16668738Y-13309688I-2J-295622D01* +G01* +X13862061Y-13309511D02* +X16668738Y-13309688D01* +D11* +D10* +X14326400Y-10783100D02* +X14426400Y-10883100D01* +X14426400Y-10783100D02* +X14326400Y-10883100D01* +X14453400Y-5906300D02* +X14553400Y-6006300D01* +X14553400Y-5906300D02* +X14453400Y-6006300D01* +X14745500Y-7773200D02* +X14845500Y-7873200D01* +X14845500Y-7773200D02* +X14745500Y-7873200D01* +X14989150Y-7125500D02* +X15089150Y-7225500D01* +X15089150Y-7125500D02* +X14989150Y-7225500D01* +X15113800Y-10643400D02* +X15213800Y-10743400D01* +X15213800Y-10643400D02* +X15113800Y-10743400D01* +X15291600Y-5931700D02* +X15391600Y-6031700D01* +X15391600Y-5931700D02* +X15291600Y-6031700D01* +X15317000Y-7722400D02* +X15417000Y-7822400D01* +X15417000Y-7722400D02* +X15317000Y-7822400D01* +X15432250Y-6732750D02* +X15532250Y-6832750D01* +X15532250Y-6732750D02* +X15432250Y-6832750D01* +X15774200Y-5588800D02* +X15874200Y-5688800D01* +X15874200Y-5588800D02* +X15774200Y-5688800D01* +X16218700Y-5753900D02* +X16318700Y-5853900D01* +X16318700Y-5753900D02* +X16218700Y-5853900D01* +X16282200Y-10351300D02* +X16382200Y-10451300D01* +X16382200Y-10351300D02* +X16282200Y-10451300D01* +X16282200Y-10859300D02* +X16382200Y-10959300D01* +X16382200Y-10859300D02* +X16282200Y-10959300D01* +D11* +X13462008Y-13608164D02* +X13462008Y-13408164D01* +X13462008Y-13408164D02* +X13509627Y-13408164D01* +X13509627Y-13408164D02* +X13538199Y-13417688D01* +X13538199Y-13417688D02* +X13557246Y-13436736D01* +X13557246Y-13436736D02* +X13566770Y-13455784D01* +X13566770Y-13455784D02* +X13576294Y-13493879D01* +X13576294Y-13493879D02* +X13576294Y-13522450D01* +X13576294Y-13522450D02* +X13566770Y-13560545D01* +X13566770Y-13560545D02* +X13557246Y-13579593D01* +X13557246Y-13579593D02* +X13538199Y-13598641D01* +X13538199Y-13598641D02* +X13509627Y-13608164D01* +X13509627Y-13608164D02* +X13462008Y-13608164D01* +X13662008Y-13608164D02* +X13662008Y-13474831D01* +X13662008Y-13512926D02* +X13671532Y-13493879D01* +X13671532Y-13493879D02* +X13681056Y-13484355D01* +X13681056Y-13484355D02* +X13700103Y-13474831D01* +X13700103Y-13474831D02* +X13719151Y-13474831D01* +X13785818Y-13608164D02* +X13785818Y-13474831D01* +X13785818Y-13408164D02* +X13776294Y-13417688D01* +X13776294Y-13417688D02* +X13785818Y-13427212D01* +X13785818Y-13427212D02* +X13795341Y-13417688D01* +X13795341Y-13417688D02* +X13785818Y-13408164D01* +X13785818Y-13408164D02* +X13785818Y-13427212D01* +X13909627Y-13608164D02* +X13890579Y-13598641D01* +X13890579Y-13598641D02* +X13881056Y-13579593D01* +X13881056Y-13579593D02* +X13881056Y-13408164D01* +X14014389Y-13608164D02* +X13995341Y-13598641D01* +X13995341Y-13598641D02* +X13985818Y-13579593D01* +X13985818Y-13579593D02* +X13985818Y-13408164D01* +X14210579Y-13608164D02* +X14210579Y-13408164D01* +X14210579Y-13408164D02* +X14277246Y-13551022D01* +X14277246Y-13551022D02* +X14343913Y-13408164D01* +X14343913Y-13408164D02* +X14343913Y-13608164D01* +X14524865Y-13608164D02* +X14524865Y-13503403D01* +X14524865Y-13503403D02* +X14515341Y-13484355D01* +X14515341Y-13484355D02* +X14496294Y-13474831D01* +X14496294Y-13474831D02* +X14458198Y-13474831D01* +X14458198Y-13474831D02* +X14439151Y-13484355D01* +X14524865Y-13598641D02* +X14505818Y-13608164D01* +X14505818Y-13608164D02* +X14458198Y-13608164D01* +X14458198Y-13608164D02* +X14439151Y-13598641D01* +X14439151Y-13598641D02* +X14429627Y-13579593D01* +X14429627Y-13579593D02* +X14429627Y-13560545D01* +X14429627Y-13560545D02* +X14439151Y-13541498D01* +X14439151Y-13541498D02* +X14458198Y-13531974D01* +X14458198Y-13531974D02* +X14505818Y-13531974D01* +X14505818Y-13531974D02* +X14524865Y-13522450D01* +X14620103Y-13474831D02* +X14620103Y-13674831D01* +X14620103Y-13484355D02* +X14639151Y-13474831D01* +X14639151Y-13474831D02* +X14677246Y-13474831D01* +X14677246Y-13474831D02* +X14696294Y-13484355D01* +X14696294Y-13484355D02* +X14705818Y-13493879D01* +X14705818Y-13493879D02* +X14715341Y-13512926D01* +X14715341Y-13512926D02* +X14715341Y-13570069D01* +X14715341Y-13570069D02* +X14705818Y-13589117D01* +X14705818Y-13589117D02* +X14696294Y-13598641D01* +X14696294Y-13598641D02* +X14677246Y-13608164D01* +X14677246Y-13608164D02* +X14639151Y-13608164D01* +X14639151Y-13608164D02* +X14620103Y-13598641D01* +X14801056Y-13589117D02* +X14810579Y-13598641D01* +X14810579Y-13598641D02* +X14801056Y-13608164D01* +X14801056Y-13608164D02* +X14791532Y-13598641D01* +X14791532Y-13598641D02* +X14801056Y-13589117D01* +X14801056Y-13589117D02* +X14801056Y-13608164D01* +X14801056Y-13484355D02* +X14810579Y-13493879D01* +X14810579Y-13493879D02* +X14801056Y-13503403D01* +X14801056Y-13503403D02* +X14791532Y-13493879D01* +X14791532Y-13493879D02* +X14801056Y-13484355D01* +X14801056Y-13484355D02* +X14801056Y-13503403D01* +D10* +X13114389Y-13904688D02* +X13214389Y-14004688D01* +X13214389Y-13904688D02* +X13114389Y-14004688D01* +D11* +X13566770Y-14028164D02* +X13452484Y-14028164D01* +X13509627Y-14028164D02* +X13509627Y-13828164D01* +X13509627Y-13828164D02* +X13490579Y-13856736D01* +X13490579Y-13856736D02* +X13471532Y-13875784D01* +X13471532Y-13875784D02* +X13452484Y-13885307D01* +X13652484Y-14009117D02* +X13662008Y-14018641D01* +X13662008Y-14018641D02* +X13652484Y-14028164D01* +X13652484Y-14028164D02* +X13642960Y-14018641D01* +X13642960Y-14018641D02* +X13652484Y-14009117D01* +X13652484Y-14009117D02* +X13652484Y-14028164D01* +X13785818Y-13828164D02* +X13804865Y-13828164D01* +X13804865Y-13828164D02* +X13823913Y-13837688D01* +X13823913Y-13837688D02* +X13833437Y-13847212D01* +X13833437Y-13847212D02* +X13842960Y-13866260D01* +X13842960Y-13866260D02* +X13852484Y-13904355D01* +X13852484Y-13904355D02* +X13852484Y-13951974D01* +X13852484Y-13951974D02* +X13842960Y-13990069D01* +X13842960Y-13990069D02* +X13833437Y-14009117D01* +X13833437Y-14009117D02* +X13823913Y-14018641D01* +X13823913Y-14018641D02* +X13804865Y-14028164D01* +X13804865Y-14028164D02* +X13785818Y-14028164D01* +X13785818Y-14028164D02* +X13766770Y-14018641D01* +X13766770Y-14018641D02* +X13757246Y-14009117D01* +X13757246Y-14009117D02* +X13747722Y-13990069D01* +X13747722Y-13990069D02* +X13738199Y-13951974D01* +X13738199Y-13951974D02* +X13738199Y-13904355D01* +X13738199Y-13904355D02* +X13747722Y-13866260D01* +X13747722Y-13866260D02* +X13757246Y-13847212D01* +X13757246Y-13847212D02* +X13766770Y-13837688D01* +X13766770Y-13837688D02* +X13785818Y-13828164D01* +X13976294Y-13828164D02* +X13995341Y-13828164D01* +X13995341Y-13828164D02* +X14014389Y-13837688D01* +X14014389Y-13837688D02* +X14023913Y-13847212D01* +X14023913Y-13847212D02* +X14033437Y-13866260D01* +X14033437Y-13866260D02* +X14042960Y-13904355D01* +X14042960Y-13904355D02* +X14042960Y-13951974D01* +X14042960Y-13951974D02* +X14033437Y-13990069D01* +X14033437Y-13990069D02* +X14023913Y-14009117D01* +X14023913Y-14009117D02* +X14014389Y-14018641D01* +X14014389Y-14018641D02* +X13995341Y-14028164D01* +X13995341Y-14028164D02* +X13976294Y-14028164D01* +X13976294Y-14028164D02* +X13957246Y-14018641D01* +X13957246Y-14018641D02* +X13947722Y-14009117D01* +X13947722Y-14009117D02* +X13938199Y-13990069D01* +X13938199Y-13990069D02* +X13928675Y-13951974D01* +X13928675Y-13951974D02* +X13928675Y-13904355D01* +X13928675Y-13904355D02* +X13938199Y-13866260D01* +X13938199Y-13866260D02* +X13947722Y-13847212D01* +X13947722Y-13847212D02* +X13957246Y-13837688D01* +X13957246Y-13837688D02* +X13976294Y-13828164D01* +X14166770Y-13828164D02* +X14185818Y-13828164D01* +X14185818Y-13828164D02* +X14204865Y-13837688D01* +X14204865Y-13837688D02* +X14214389Y-13847212D01* +X14214389Y-13847212D02* +X14223913Y-13866260D01* +X14223913Y-13866260D02* +X14233437Y-13904355D01* +X14233437Y-13904355D02* +X14233437Y-13951974D01* +X14233437Y-13951974D02* +X14223913Y-13990069D01* +X14223913Y-13990069D02* +X14214389Y-14009117D01* +X14214389Y-14009117D02* +X14204865Y-14018641D01* +X14204865Y-14018641D02* +X14185818Y-14028164D01* +X14185818Y-14028164D02* +X14166770Y-14028164D01* +X14166770Y-14028164D02* +X14147722Y-14018641D01* +X14147722Y-14018641D02* +X14138199Y-14009117D01* +X14138199Y-14009117D02* +X14128675Y-13990069D01* +X14128675Y-13990069D02* +X14119151Y-13951974D01* +X14119151Y-13951974D02* +X14119151Y-13904355D01* +X14119151Y-13904355D02* +X14128675Y-13866260D01* +X14128675Y-13866260D02* +X14138199Y-13847212D01* +X14138199Y-13847212D02* +X14147722Y-13837688D01* +X14147722Y-13837688D02* +X14166770Y-13828164D01* +X14319151Y-14028164D02* +X14319151Y-13894831D01* +X14319151Y-13913879D02* +X14328675Y-13904355D01* +X14328675Y-13904355D02* +X14347722Y-13894831D01* +X14347722Y-13894831D02* +X14376294Y-13894831D01* +X14376294Y-13894831D02* +X14395341Y-13904355D01* +X14395341Y-13904355D02* +X14404865Y-13923403D01* +X14404865Y-13923403D02* +X14404865Y-14028164D01* +X14404865Y-13923403D02* +X14414389Y-13904355D01* +X14414389Y-13904355D02* +X14433437Y-13894831D01* +X14433437Y-13894831D02* +X14462008Y-13894831D01* +X14462008Y-13894831D02* +X14481056Y-13904355D01* +X14481056Y-13904355D02* +X14490580Y-13923403D01* +X14490580Y-13923403D02* +X14490580Y-14028164D01* +X14585818Y-14028164D02* +X14585818Y-13894831D01* +X14585818Y-13913879D02* +X14595341Y-13904355D01* +X14595341Y-13904355D02* +X14614389Y-13894831D01* +X14614389Y-13894831D02* +X14642961Y-13894831D01* +X14642961Y-13894831D02* +X14662008Y-13904355D01* +X14662008Y-13904355D02* +X14671532Y-13923403D01* +X14671532Y-13923403D02* +X14671532Y-14028164D01* +X14671532Y-13923403D02* +X14681056Y-13904355D01* +X14681056Y-13904355D02* +X14700103Y-13894831D01* +X14700103Y-13894831D02* +X14728675Y-13894831D01* +X14728675Y-13894831D02* +X14747722Y-13904355D01* +X14747722Y-13904355D02* +X14757246Y-13923403D01* +X14757246Y-13923403D02* +X14757246Y-14028164D01* +X15115341Y-13818641D02* +X14943913Y-14075784D01* +X15340103Y-13828164D02* +X15359151Y-13828164D01* +X15359151Y-13828164D02* +X15378199Y-13837688D01* +X15378199Y-13837688D02* +X15387722Y-13847212D01* +X15387722Y-13847212D02* +X15397246Y-13866260D01* +X15397246Y-13866260D02* +X15406770Y-13904355D01* +X15406770Y-13904355D02* +X15406770Y-13951974D01* +X15406770Y-13951974D02* +X15397246Y-13990069D01* +X15397246Y-13990069D02* +X15387722Y-14009117D01* +X15387722Y-14009117D02* +X15378199Y-14018641D01* +X15378199Y-14018641D02* +X15359151Y-14028164D01* +X15359151Y-14028164D02* +X15340103Y-14028164D01* +X15340103Y-14028164D02* +X15321056Y-14018641D01* +X15321056Y-14018641D02* +X15311532Y-14009117D01* +X15311532Y-14009117D02* +X15302008Y-13990069D01* +X15302008Y-13990069D02* +X15292484Y-13951974D01* +X15292484Y-13951974D02* +X15292484Y-13904355D01* +X15292484Y-13904355D02* +X15302008Y-13866260D01* +X15302008Y-13866260D02* +X15311532Y-13847212D01* +X15311532Y-13847212D02* +X15321056Y-13837688D01* +X15321056Y-13837688D02* +X15340103Y-13828164D01* +X15492484Y-14009117D02* +X15502008Y-14018641D01* +X15502008Y-14018641D02* +X15492484Y-14028164D01* +X15492484Y-14028164D02* +X15482961Y-14018641D01* +X15482961Y-14018641D02* +X15492484Y-14009117D01* +X15492484Y-14009117D02* +X15492484Y-14028164D01* +X15625818Y-13828164D02* +X15644865Y-13828164D01* +X15644865Y-13828164D02* +X15663913Y-13837688D01* +X15663913Y-13837688D02* +X15673437Y-13847212D01* +X15673437Y-13847212D02* +X15682961Y-13866260D01* +X15682961Y-13866260D02* +X15692484Y-13904355D01* +X15692484Y-13904355D02* +X15692484Y-13951974D01* +X15692484Y-13951974D02* +X15682961Y-13990069D01* +X15682961Y-13990069D02* +X15673437Y-14009117D01* +X15673437Y-14009117D02* +X15663913Y-14018641D01* +X15663913Y-14018641D02* +X15644865Y-14028164D01* +X15644865Y-14028164D02* +X15625818Y-14028164D01* +X15625818Y-14028164D02* +X15606770Y-14018641D01* +X15606770Y-14018641D02* +X15597246Y-14009117D01* +X15597246Y-14009117D02* +X15587722Y-13990069D01* +X15587722Y-13990069D02* +X15578199Y-13951974D01* +X15578199Y-13951974D02* +X15578199Y-13904355D01* +X15578199Y-13904355D02* +X15587722Y-13866260D01* +X15587722Y-13866260D02* +X15597246Y-13847212D01* +X15597246Y-13847212D02* +X15606770Y-13837688D01* +X15606770Y-13837688D02* +X15625818Y-13828164D01* +X15759151Y-13828164D02* +X15882961Y-13828164D01* +X15882961Y-13828164D02* +X15816294Y-13904355D01* +X15816294Y-13904355D02* +X15844865Y-13904355D01* +X15844865Y-13904355D02* +X15863913Y-13913879D01* +X15863913Y-13913879D02* +X15873437Y-13923403D01* +X15873437Y-13923403D02* +X15882961Y-13942450D01* +X15882961Y-13942450D02* +X15882961Y-13990069D01* +X15882961Y-13990069D02* +X15873437Y-14009117D01* +X15873437Y-14009117D02* +X15863913Y-14018641D01* +X15863913Y-14018641D02* +X15844865Y-14028164D01* +X15844865Y-14028164D02* +X15787722Y-14028164D01* +X15787722Y-14028164D02* +X15768675Y-14018641D01* +X15768675Y-14018641D02* +X15759151Y-14009117D01* +X15978199Y-14028164D02* +X16016294Y-14028164D01* +X16016294Y-14028164D02* +X16035342Y-14018641D01* +X16035342Y-14018641D02* +X16044865Y-14009117D01* +X16044865Y-14009117D02* +X16063913Y-13980545D01* +X16063913Y-13980545D02* +X16073437Y-13942450D01* +X16073437Y-13942450D02* +X16073437Y-13866260D01* +X16073437Y-13866260D02* +X16063913Y-13847212D01* +X16063913Y-13847212D02* +X16054389Y-13837688D01* +X16054389Y-13837688D02* +X16035342Y-13828164D01* +X16035342Y-13828164D02* +X15997246Y-13828164D01* +X15997246Y-13828164D02* +X15978199Y-13837688D01* +X15978199Y-13837688D02* +X15968675Y-13847212D01* +X15968675Y-13847212D02* +X15959151Y-13866260D01* +X15959151Y-13866260D02* +X15959151Y-13913879D01* +X15959151Y-13913879D02* +X15968675Y-13932926D01* +X15968675Y-13932926D02* +X15978199Y-13942450D01* +X15978199Y-13942450D02* +X15997246Y-13951974D01* +X15997246Y-13951974D02* +X16035342Y-13951974D01* +X16035342Y-13951974D02* +X16054389Y-13942450D01* +X16054389Y-13942450D02* +X16063913Y-13932926D01* +X16063913Y-13932926D02* +X16073437Y-13913879D01* +X16244865Y-13894831D02* +X16244865Y-14028164D01* +X16197246Y-13818641D02* +X16149627Y-13961498D01* +X16149627Y-13961498D02* +X16273437Y-13961498D01* +X16340103Y-13828164D02* +X16340103Y-13866260D01* +X16416294Y-13828164D02* +X16416294Y-13866260D01* +X16679151Y-14104355D02* +X16669627Y-14094831D01* +X16669627Y-14094831D02* +X16650580Y-14066260D01* +X16650580Y-14066260D02* +X16641056Y-14047212D01* +X16641056Y-14047212D02* +X16631532Y-14018641D01* +X16631532Y-14018641D02* +X16622008Y-13971022D01* +X16622008Y-13971022D02* +X16622008Y-13932926D01* +X16622008Y-13932926D02* +X16631532Y-13885307D01* +X16631532Y-13885307D02* +X16641056Y-13856736D01* +X16641056Y-13856736D02* +X16650580Y-13837688D01* +X16650580Y-13837688D02* +X16669627Y-13809117D01* +X16669627Y-13809117D02* +X16679151Y-13799593D01* +X16860104Y-14028164D02* +X16745818Y-14028164D01* +X16802961Y-14028164D02* +X16802961Y-13828164D01* +X16802961Y-13828164D02* +X16783913Y-13856736D01* +X16783913Y-13856736D02* +X16764865Y-13875784D01* +X16764865Y-13875784D02* +X16745818Y-13885307D01* +X16936294Y-13847212D02* +X16945818Y-13837688D01* +X16945818Y-13837688D02* +X16964865Y-13828164D01* +X16964865Y-13828164D02* +X17012485Y-13828164D01* +X17012485Y-13828164D02* +X17031532Y-13837688D01* +X17031532Y-13837688D02* +X17041056Y-13847212D01* +X17041056Y-13847212D02* +X17050580Y-13866260D01* +X17050580Y-13866260D02* +X17050580Y-13885307D01* +X17050580Y-13885307D02* +X17041056Y-13913879D01* +X17041056Y-13913879D02* +X16926770Y-14028164D01* +X16926770Y-14028164D02* +X17050580Y-14028164D01* +X17256294Y-14028164D02* +X17256294Y-13828164D01* +X17342008Y-14028164D02* +X17342008Y-13923403D01* +X17342008Y-13923403D02* +X17332485Y-13904355D01* +X17332485Y-13904355D02* +X17313437Y-13894831D01* +X17313437Y-13894831D02* +X17284865Y-13894831D01* +X17284865Y-13894831D02* +X17265818Y-13904355D01* +X17265818Y-13904355D02* +X17256294Y-13913879D01* +X17465818Y-14028164D02* +X17446770Y-14018641D01* +X17446770Y-14018641D02* +X17437246Y-14009117D01* +X17437246Y-14009117D02* +X17427723Y-13990069D01* +X17427723Y-13990069D02* +X17427723Y-13932926D01* +X17427723Y-13932926D02* +X17437246Y-13913879D01* +X17437246Y-13913879D02* +X17446770Y-13904355D01* +X17446770Y-13904355D02* +X17465818Y-13894831D01* +X17465818Y-13894831D02* +X17494389Y-13894831D01* +X17494389Y-13894831D02* +X17513437Y-13904355D01* +X17513437Y-13904355D02* +X17522961Y-13913879D01* +X17522961Y-13913879D02* +X17532485Y-13932926D01* +X17532485Y-13932926D02* +X17532485Y-13990069D01* +X17532485Y-13990069D02* +X17522961Y-14009117D01* +X17522961Y-14009117D02* +X17513437Y-14018641D01* +X17513437Y-14018641D02* +X17494389Y-14028164D01* +X17494389Y-14028164D02* +X17465818Y-14028164D01* +X17646770Y-14028164D02* +X17627723Y-14018641D01* +X17627723Y-14018641D02* +X17618199Y-13999593D01* +X17618199Y-13999593D02* +X17618199Y-13828164D01* +X17799151Y-14018641D02* +X17780104Y-14028164D01* +X17780104Y-14028164D02* +X17742008Y-14028164D01* +X17742008Y-14028164D02* +X17722961Y-14018641D01* +X17722961Y-14018641D02* +X17713437Y-13999593D01* +X17713437Y-13999593D02* +X17713437Y-13923403D01* +X17713437Y-13923403D02* +X17722961Y-13904355D01* +X17722961Y-13904355D02* +X17742008Y-13894831D01* +X17742008Y-13894831D02* +X17780104Y-13894831D01* +X17780104Y-13894831D02* +X17799151Y-13904355D01* +X17799151Y-13904355D02* +X17808675Y-13923403D01* +X17808675Y-13923403D02* +X17808675Y-13942450D01* +X17808675Y-13942450D02* +X17713437Y-13961498D01* +X17884866Y-14018641D02* +X17903913Y-14028164D01* +X17903913Y-14028164D02* +X17942008Y-14028164D01* +X17942008Y-14028164D02* +X17961056Y-14018641D01* +X17961056Y-14018641D02* +X17970580Y-13999593D01* +X17970580Y-13999593D02* +X17970580Y-13990069D01* +X17970580Y-13990069D02* +X17961056Y-13971022D01* +X17961056Y-13971022D02* +X17942008Y-13961498D01* +X17942008Y-13961498D02* +X17913437Y-13961498D01* +X17913437Y-13961498D02* +X17894389Y-13951974D01* +X17894389Y-13951974D02* +X17884866Y-13932926D01* +X17884866Y-13932926D02* +X17884866Y-13923403D01* +X17884866Y-13923403D02* +X17894389Y-13904355D01* +X17894389Y-13904355D02* +X17913437Y-13894831D01* +X17913437Y-13894831D02* +X17942008Y-13894831D01* +X17942008Y-13894831D02* +X17961056Y-13904355D01* +X18037247Y-14104355D02* +X18046770Y-14094831D01* +X18046770Y-14094831D02* +X18065818Y-14066260D01* +X18065818Y-14066260D02* +X18075342Y-14047212D01* +X18075342Y-14047212D02* +X18084866Y-14018641D01* +X18084866Y-14018641D02* +X18094389Y-13971022D01* +X18094389Y-13971022D02* +X18094389Y-13932926D01* +X18094389Y-13932926D02* +X18084866Y-13885307D01* +X18084866Y-13885307D02* +X18075342Y-13856736D01* +X18075342Y-13856736D02* +X18065818Y-13837688D01* +X18065818Y-13837688D02* +X18046770Y-13809117D01* +X18046770Y-13809117D02* +X18037247Y-13799593D01* +M02* diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Gerbers/StudioMic-PTH.drl b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Gerbers/StudioMic-PTH.drl new file mode 100755 index 0000000..f2527f5 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Gerbers/StudioMic-PTH.drl @@ -0,0 +1,28 @@ +M48 +; DRILL file {KiCad (7.0.0)} date Sat Mar 18 07:41:42 2023 +; FORMAT={-:-/ absolute / metric / decimal} +; #@! TF.CreationDate,2023-03-18T07:41:42+03:00 +; #@! TF.GenerationSoftware,Kicad,Pcbnew,(7.0.0) +; #@! TF.FileFunction,Plated,1,2,PTH +FMAT,2 +METRIC +; #@! TA.AperFunction,Plated,PTH,ViaDrill +T1C1.000 +% +G90 +G05 +T1 +X143.764Y-108.331 +X145.034Y-59.563 +X147.955Y-78.232 +X150.391Y-71.755 +X151.638Y-106.934 +X153.416Y-59.817 +X153.67Y-77.724 +X154.822Y-67.828 +X158.242Y-56.388 +X162.687Y-58.039 +X163.322Y-104.013 +X163.322Y-109.093 +T0 +M30 diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Gerbers/StudioMic-job.gbrjob b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Gerbers/StudioMic-job.gbrjob new file mode 100755 index 0000000..61c9a2c --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Gerbers/StudioMic-job.gbrjob @@ -0,0 +1,125 @@ +{ + "Header": { + "GenerationSoftware": { + "Vendor": "KiCad", + "Application": "Pcbnew", + "Version": "(7.0.0)" + }, + "CreationDate": "2023-03-18T07:41:40+03:00" + }, + "GeneralSpecs": { + "ProjectId": { + "Name": "StudioMic", + "GUID": "53747564-696f-44d6-9963-2e6b69636164", + "Revision": "1" + }, + "Size": { + "X": 40.9989, + "Y": 85.1 + }, + "LayerNumber": 2, + "BoardThickness": 1.6, + "Finish": "None" + }, + "DesignRules": [ + { + "Layers": "Outer", + "PadToPad": 0.25, + "PadToTrack": 0.25, + "TrackToTrack": 0.3, + "MinLineWidth": 0.4 + } + ], + "FilesAttributes": [ + { + "Path": "StudioMic-F_Cu.gbr", + "FileFunction": "Copper,L1,Top", + "FilePolarity": "Positive" + }, + { + "Path": "StudioMic-B_Cu.gbr", + "FileFunction": "Copper,L2,Bot", + "FilePolarity": "Positive" + }, + { + "Path": "StudioMic-F_Paste.gbr", + "FileFunction": "SolderPaste,Top", + "FilePolarity": "Positive" + }, + { + "Path": "StudioMic-B_Paste.gbr", + "FileFunction": "SolderPaste,Bot", + "FilePolarity": "Positive" + }, + { + "Path": "StudioMic-F_Silkscreen.gbr", + "FileFunction": "Legend,Top", + "FilePolarity": "Positive" + }, + { + "Path": "StudioMic-B_Silkscreen.gbr", + "FileFunction": "Legend,Bot", + "FilePolarity": "Positive" + }, + { + "Path": "StudioMic-F_Mask.gbr", + "FileFunction": "SolderMask,Top", + "FilePolarity": "Negative" + }, + { + "Path": "StudioMic-B_Mask.gbr", + "FileFunction": "SolderMask,Bot", + "FilePolarity": "Negative" + }, + { + "Path": "StudioMic-Edge_Cuts.gbr", + "FileFunction": "Profile", + "FilePolarity": "Positive" + } + ], + "MaterialStackup": [ + { + "Type": "Legend", + "Name": "Top Silk Screen" + }, + { + "Type": "SolderPaste", + "Name": "Top Solder Paste" + }, + { + "Type": "SolderMask", + "Thickness": 0.01, + "Name": "Top Solder Mask" + }, + { + "Type": "Copper", + "Thickness": 0.035, + "Name": "F.Cu" + }, + { + "Type": "Dielectric", + "Thickness": 1.51, + "Material": "FR4", + "Name": "F.Cu/B.Cu", + "Notes": "Type: dielectric layer 1 (from F.Cu to B.Cu)" + }, + { + "Type": "Copper", + "Thickness": 0.035, + "Name": "B.Cu" + }, + { + "Type": "SolderMask", + "Thickness": 0.01, + "Name": "Bottom Solder Mask" + }, + { + "Type": "SolderPaste", + "Name": "Bottom Solder Paste" + }, + { + "Type": "Legend", + "Name": "Bottom Silk Screen" + } + ] +} diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/LICENSE b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/LICENSE new file mode 100755 index 0000000..e69de29 diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/README.md b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/README.md new file mode 100755 index 0000000..e69de29 diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/LASERStudioMic-F_Mask.svg b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/LASERStudioMic-F_Mask.svg new file mode 100755 index 0000000..e5f79d0 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/LASERStudioMic-F_Mask.svg @@ -0,0 +1 @@ + \ No newline at end of file diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/LASER_Cutout.svg b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/LASER_Cutout.svg new file mode 100755 index 0000000..43c013c --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/LASER_Cutout.svg @@ -0,0 +1 @@ + \ No newline at end of file diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/LASER_StudioMic-F_Cu.svg b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/LASER_StudioMic-F_Cu.svg new file mode 100755 index 0000000..7600c31 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/LASER_StudioMic-F_Cu.svg @@ -0,0 +1 @@ + \ No newline at end of file diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-B_Cu.svg b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-B_Cu.svg new file mode 100755 index 0000000..dd0a6b1 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-B_Cu.svg @@ -0,0 +1,498 @@ + + + +SVG Image created as StudioMic-B_Cu.svg date 2023/03/18 07:42:13 + Image generated by PCBNEW + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-B_Mask.svg b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-B_Mask.svg new file mode 100755 index 0000000..4be9a18 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-B_Mask.svg @@ -0,0 +1,332 @@ + + + +SVG Image created as StudioMic-B_Mask.svg date 2023/03/18 07:42:13 + Image generated by PCBNEW + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-B_Paste.svg b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-B_Paste.svg new file mode 100755 index 0000000..d889eb6 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-B_Paste.svg @@ -0,0 +1,314 @@ + + + +SVG Image created as StudioMic-B_Paste.svg date 2023/03/18 07:42:13 + Image generated by PCBNEW + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-B_Silkscreen.svg b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-B_Silkscreen.svg new file mode 100755 index 0000000..4438ba4 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-B_Silkscreen.svg @@ -0,0 +1,314 @@ + + + +SVG Image created as StudioMic-B_Silkscreen.svg date 2023/03/18 07:42:13 + Image generated by PCBNEW + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-Edge_Cuts.svg b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-Edge_Cuts.svg new file mode 100755 index 0000000..204f4b7 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-Edge_Cuts.svg @@ -0,0 +1,178 @@ + + + +SVG Image created as StudioMic-Edge_Cuts.svg date 2023/03/18 07:42:13 + Image generated by PCBNEW + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-F_Cu.afdesign b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-F_Cu.afdesign new file mode 100755 index 0000000..202f815 Binary files /dev/null and b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-F_Cu.afdesign differ diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-F_Cu.svg b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-F_Cu.svg new file mode 100755 index 0000000..199ad21 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-F_Cu.svg @@ -0,0 +1,4571 @@ + + + +SVG Image created as StudioMic-F_Cu.svg date 2023/03/18 07:42:13 + Image generated by PCBNEW + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-F_Mask.svg b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-F_Mask.svg new file mode 100755 index 0000000..ecbd406 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-F_Mask.svg @@ -0,0 +1,3676 @@ + + + +SVG Image created as StudioMic-F_Mask.svg date 2023/03/18 07:42:13 + Image generated by PCBNEW + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-F_Paste.svg b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-F_Paste.svg new file mode 100755 index 0000000..e69de29 diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-F_Silkscreen.svg b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-F_Silkscreen.svg new file mode 100755 index 0000000..eecd5be --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-F_Silkscreen.svg @@ -0,0 +1,7698 @@ + + + +SVG Image created as StudioMic-F_Silkscreen.svg date 2023/03/18 07:42:13 + Image generated by PCBNEW + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +R101-R110 +R101-R110 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +C12 + +C12 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +C8 +C8 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +C16 +C16 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +U2 +U2 + + + + + + + + + + + + + + + + + + + +D1 +D1 + + + + + + + + + + + + + + + + + +R12 +R12 + + + + + + + + + + + + + + + + + + + + + + + + + + +R5 +R5 + + + + + + + + + + + + + + + + + + + + + + + + + + +R10 +R10 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +D8 +D8 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +C3 +C3 + + + + + + + + + + + + + + + + + + + + + + + + + + + + +R2 +R2 + + + + + + + + + + + + + + + + + + + + + +R6 +R6 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +C15 +C15 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +C11 + +C11 + + + + + + + + + + + + + + + + + + + + + + + + + +C17 +C17 + + + + + + + + + + + + + + + + + + + + + + +D3 +D3 + + + + + + + + + + + + + + + + + + + + + + + + + +R9 +R9 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +R3 +R3 + + + + + + + + + + + + + + + + + + + + + + + + +R11 +R11 + + + + + + + + + + + + + + + + + + + + + +R7 +R7 + + + + + + + + + + + + + +C10 +C10 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +R4 +R4 + + + + + + + + + + + + + + +C1 +C1 + + + + + + + + + + + + + + + + + + + + + +C13 + +C13 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +C19 +C19 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +C7 +C7 + + + + + + + + + + + + + + + + + +R1 +R1 + + + + + + + + + + + + + + + + +D7 +D7 + + + + + + + + + + + + + + +C9 +C9 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +D2 +D2 + + + + + + + + + + + + + + + + + + + + + + +R13 +R13 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +R8 +R8 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +D4 +D4 + + + + + + + + + + + + + + + +C18 +C18 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +D6 +D6 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +C4 +C4 + + + + + + + + + + + + + + + + + + +C14 +C14 + + + + + + + + + + + + + + + + + + + + + + + +D5 +D5 + + + + + + + + + + + + + + + + + + + + + + + + + + + +C6 +C6 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +C2 +C2 + + + + + + + + + + + + + + + + + + + + + + + + + +C5 +C5 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +U1 +U1 + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-NPTH-drl_map.gbr b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-NPTH-drl_map.gbr new file mode 100755 index 0000000..7b56b7a --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-NPTH-drl_map.gbr @@ -0,0 +1,1112 @@ +%TF.GenerationSoftware,KiCad,Pcbnew,(7.0.0)*% +%TF.CreationDate,2023-03-18T07:42:10+03:00*% +%TF.ProjectId,StudioMic,53747564-696f-44d6-9963-2e6b69636164,1*% +%TF.SameCoordinates,Original*% +%TF.FileFunction,Drillmap*% +%TF.FilePolarity,Positive*% +%FSLAX45Y45*% +G04 Gerber Fmt 4.5, Leading zero omitted, Abs format (unit mm)* +G04 Created by KiCad (PCBNEW (7.0.0)) date 2023-03-18 07:42:10* +%MOMM*% +%LPD*% +G01* +G04 APERTURE LIST* +%ADD10C,0.100000*% +%ADD11C,0.200000*% +%ADD12C,0.270000*% +G04 APERTURE END LIST* +D10* +X16964362Y-13014065D02* +X16973562Y-13014065D01* +X13862062Y-13309511D02* +G75* +G03* +X13566438Y-13013888I-295622J2D01* +G01* +X13566438Y-13013888D02* +X13557238Y-13013888D01* +X17309284Y-4937321D02* +G75* +G03* +X17181650Y-4809688I-127633J0D01* +G01* +X13347022Y-4809688D02* +G75* +G03* +X13219389Y-4937321I0J-127633D01* +G01* +X13219389Y-4937321D02* +X13557238Y-13013888D01* +X13347022Y-4809688D02* +X17181650Y-4809688D01* +X17309284Y-4937321D02* +X16973562Y-13014065D01* +X16964362Y-13014068D02* +G75* +G03* +X16668738Y-13309688I-2J-295622D01* +G01* +X13862061Y-13309511D02* +X16668738Y-13309688D01* +D11* +D12* +X13679361Y-5004688D02* +X13949361Y-5274688D01* +X13949361Y-5004688D02* +X13679361Y-5274688D01* +D11* +X13774361Y-5274688D02* +X13854361Y-5274688D01* +X13854361Y-5274688D02* +G75* +G03* +X13854361Y-5004688I0J135000D01* +G01* +X13854361Y-5004688D02* +X13774361Y-5004688D01* +X13774361Y-5004688D02* +G75* +G03* +X13774361Y-5274688I0J-135000D01* +G01* +D12* +X16579361Y-5004688D02* +X16849362Y-5274688D01* +X16849362Y-5004688D02* +X16579361Y-5274688D01* +D11* +X16674361Y-5274688D02* +X16754361Y-5274688D01* +X16754361Y-5274688D02* +G75* +G03* +X16754361Y-5004688I0J135000D01* +G01* +X16754361Y-5004688D02* +X16674361Y-5004688D01* +X16674361Y-5004688D02* +G75* +G03* +X16674361Y-5274688I0J-135000D01* +G01* +X13462008Y-13608164D02* +X13462008Y-13408164D01* +X13462008Y-13408164D02* +X13509627Y-13408164D01* +X13509627Y-13408164D02* +X13538199Y-13417688D01* +X13538199Y-13417688D02* +X13557246Y-13436736D01* +X13557246Y-13436736D02* +X13566770Y-13455784D01* +X13566770Y-13455784D02* +X13576294Y-13493879D01* +X13576294Y-13493879D02* +X13576294Y-13522450D01* +X13576294Y-13522450D02* +X13566770Y-13560545D01* +X13566770Y-13560545D02* +X13557246Y-13579593D01* +X13557246Y-13579593D02* +X13538199Y-13598641D01* +X13538199Y-13598641D02* +X13509627Y-13608164D01* +X13509627Y-13608164D02* +X13462008Y-13608164D01* +X13662008Y-13608164D02* +X13662008Y-13474831D01* +X13662008Y-13512926D02* +X13671532Y-13493879D01* +X13671532Y-13493879D02* +X13681056Y-13484355D01* +X13681056Y-13484355D02* +X13700103Y-13474831D01* +X13700103Y-13474831D02* +X13719151Y-13474831D01* +X13785818Y-13608164D02* +X13785818Y-13474831D01* +X13785818Y-13408164D02* +X13776294Y-13417688D01* +X13776294Y-13417688D02* +X13785818Y-13427212D01* +X13785818Y-13427212D02* +X13795341Y-13417688D01* +X13795341Y-13417688D02* +X13785818Y-13408164D01* +X13785818Y-13408164D02* +X13785818Y-13427212D01* +X13909627Y-13608164D02* +X13890579Y-13598641D01* +X13890579Y-13598641D02* +X13881056Y-13579593D01* +X13881056Y-13579593D02* +X13881056Y-13408164D01* +X14014389Y-13608164D02* +X13995341Y-13598641D01* +X13995341Y-13598641D02* +X13985818Y-13579593D01* +X13985818Y-13579593D02* +X13985818Y-13408164D01* +X14210579Y-13608164D02* +X14210579Y-13408164D01* +X14210579Y-13408164D02* +X14277246Y-13551022D01* +X14277246Y-13551022D02* +X14343913Y-13408164D01* +X14343913Y-13408164D02* +X14343913Y-13608164D01* +X14524865Y-13608164D02* +X14524865Y-13503403D01* +X14524865Y-13503403D02* +X14515341Y-13484355D01* +X14515341Y-13484355D02* +X14496294Y-13474831D01* +X14496294Y-13474831D02* +X14458198Y-13474831D01* +X14458198Y-13474831D02* +X14439151Y-13484355D01* +X14524865Y-13598641D02* +X14505818Y-13608164D01* +X14505818Y-13608164D02* +X14458198Y-13608164D01* +X14458198Y-13608164D02* +X14439151Y-13598641D01* +X14439151Y-13598641D02* +X14429627Y-13579593D01* +X14429627Y-13579593D02* +X14429627Y-13560545D01* +X14429627Y-13560545D02* +X14439151Y-13541498D01* +X14439151Y-13541498D02* +X14458198Y-13531974D01* +X14458198Y-13531974D02* +X14505818Y-13531974D01* +X14505818Y-13531974D02* +X14524865Y-13522450D01* +X14620103Y-13474831D02* +X14620103Y-13674831D01* +X14620103Y-13484355D02* +X14639151Y-13474831D01* +X14639151Y-13474831D02* +X14677246Y-13474831D01* +X14677246Y-13474831D02* +X14696294Y-13484355D01* +X14696294Y-13484355D02* +X14705818Y-13493879D01* +X14705818Y-13493879D02* +X14715341Y-13512926D01* +X14715341Y-13512926D02* +X14715341Y-13570069D01* +X14715341Y-13570069D02* +X14705818Y-13589117D01* +X14705818Y-13589117D02* +X14696294Y-13598641D01* +X14696294Y-13598641D02* +X14677246Y-13608164D01* +X14677246Y-13608164D02* +X14639151Y-13608164D01* +X14639151Y-13608164D02* +X14620103Y-13598641D01* +X14801056Y-13589117D02* +X14810579Y-13598641D01* +X14810579Y-13598641D02* +X14801056Y-13608164D01* +X14801056Y-13608164D02* +X14791532Y-13598641D01* +X14791532Y-13598641D02* +X14801056Y-13589117D01* +X14801056Y-13589117D02* +X14801056Y-13608164D01* +X14801056Y-13484355D02* +X14810579Y-13493879D01* +X14810579Y-13493879D02* +X14801056Y-13503403D01* +X14801056Y-13503403D02* +X14791532Y-13493879D01* +X14791532Y-13493879D02* +X14801056Y-13484355D01* +X14801056Y-13484355D02* +X14801056Y-13503403D01* +X13014389Y-13854688D02* +X13214389Y-14054688D01* +X13214389Y-13854688D02* +X13014389Y-14054688D01* +X13452484Y-13847212D02* +X13462008Y-13837688D01* +X13462008Y-13837688D02* +X13481056Y-13828164D01* +X13481056Y-13828164D02* +X13528675Y-13828164D01* +X13528675Y-13828164D02* +X13547722Y-13837688D01* +X13547722Y-13837688D02* +X13557246Y-13847212D01* +X13557246Y-13847212D02* +X13566770Y-13866260D01* +X13566770Y-13866260D02* +X13566770Y-13885307D01* +X13566770Y-13885307D02* +X13557246Y-13913879D01* +X13557246Y-13913879D02* +X13442960Y-14028164D01* +X13442960Y-14028164D02* +X13566770Y-14028164D01* +X13652484Y-14009117D02* +X13662008Y-14018641D01* +X13662008Y-14018641D02* +X13652484Y-14028164D01* +X13652484Y-14028164D02* +X13642960Y-14018641D01* +X13642960Y-14018641D02* +X13652484Y-14009117D01* +X13652484Y-14009117D02* +X13652484Y-14028164D01* +X13728675Y-13828164D02* +X13862008Y-13828164D01* +X13862008Y-13828164D02* +X13776294Y-14028164D01* +X13976294Y-13828164D02* +X13995341Y-13828164D01* +X13995341Y-13828164D02* +X14014389Y-13837688D01* +X14014389Y-13837688D02* +X14023913Y-13847212D01* +X14023913Y-13847212D02* +X14033437Y-13866260D01* +X14033437Y-13866260D02* +X14042960Y-13904355D01* +X14042960Y-13904355D02* +X14042960Y-13951974D01* +X14042960Y-13951974D02* +X14033437Y-13990069D01* +X14033437Y-13990069D02* +X14023913Y-14009117D01* +X14023913Y-14009117D02* +X14014389Y-14018641D01* +X14014389Y-14018641D02* +X13995341Y-14028164D01* +X13995341Y-14028164D02* +X13976294Y-14028164D01* +X13976294Y-14028164D02* +X13957246Y-14018641D01* +X13957246Y-14018641D02* +X13947722Y-14009117D01* +X13947722Y-14009117D02* +X13938199Y-13990069D01* +X13938199Y-13990069D02* +X13928675Y-13951974D01* +X13928675Y-13951974D02* +X13928675Y-13904355D01* +X13928675Y-13904355D02* +X13938199Y-13866260D01* +X13938199Y-13866260D02* +X13947722Y-13847212D01* +X13947722Y-13847212D02* +X13957246Y-13837688D01* +X13957246Y-13837688D02* +X13976294Y-13828164D01* +X14166770Y-13828164D02* +X14185818Y-13828164D01* +X14185818Y-13828164D02* +X14204865Y-13837688D01* +X14204865Y-13837688D02* +X14214389Y-13847212D01* +X14214389Y-13847212D02* +X14223913Y-13866260D01* +X14223913Y-13866260D02* +X14233437Y-13904355D01* +X14233437Y-13904355D02* +X14233437Y-13951974D01* +X14233437Y-13951974D02* +X14223913Y-13990069D01* +X14223913Y-13990069D02* +X14214389Y-14009117D01* +X14214389Y-14009117D02* +X14204865Y-14018641D01* +X14204865Y-14018641D02* +X14185818Y-14028164D01* +X14185818Y-14028164D02* +X14166770Y-14028164D01* +X14166770Y-14028164D02* +X14147722Y-14018641D01* +X14147722Y-14018641D02* +X14138199Y-14009117D01* +X14138199Y-14009117D02* +X14128675Y-13990069D01* +X14128675Y-13990069D02* +X14119151Y-13951974D01* +X14119151Y-13951974D02* +X14119151Y-13904355D01* +X14119151Y-13904355D02* +X14128675Y-13866260D01* +X14128675Y-13866260D02* +X14138199Y-13847212D01* +X14138199Y-13847212D02* +X14147722Y-13837688D01* +X14147722Y-13837688D02* +X14166770Y-13828164D01* +X14319151Y-14028164D02* +X14319151Y-13894831D01* +X14319151Y-13913879D02* +X14328675Y-13904355D01* +X14328675Y-13904355D02* +X14347722Y-13894831D01* +X14347722Y-13894831D02* +X14376294Y-13894831D01* +X14376294Y-13894831D02* +X14395341Y-13904355D01* +X14395341Y-13904355D02* +X14404865Y-13923403D01* +X14404865Y-13923403D02* +X14404865Y-14028164D01* +X14404865Y-13923403D02* +X14414389Y-13904355D01* +X14414389Y-13904355D02* +X14433437Y-13894831D01* +X14433437Y-13894831D02* +X14462008Y-13894831D01* +X14462008Y-13894831D02* +X14481056Y-13904355D01* +X14481056Y-13904355D02* +X14490580Y-13923403D01* +X14490580Y-13923403D02* +X14490580Y-14028164D01* +X14585818Y-14028164D02* +X14585818Y-13894831D01* +X14585818Y-13913879D02* +X14595341Y-13904355D01* +X14595341Y-13904355D02* +X14614389Y-13894831D01* +X14614389Y-13894831D02* +X14642961Y-13894831D01* +X14642961Y-13894831D02* +X14662008Y-13904355D01* +X14662008Y-13904355D02* +X14671532Y-13923403D01* +X14671532Y-13923403D02* +X14671532Y-14028164D01* +X14671532Y-13923403D02* +X14681056Y-13904355D01* +X14681056Y-13904355D02* +X14700103Y-13894831D01* +X14700103Y-13894831D02* +X14728675Y-13894831D01* +X14728675Y-13894831D02* +X14747722Y-13904355D01* +X14747722Y-13904355D02* +X14757246Y-13923403D01* +X14757246Y-13923403D02* +X14757246Y-14028164D01* +X15115341Y-13818641D02* +X14943913Y-14075784D01* +X15340103Y-13828164D02* +X15359151Y-13828164D01* +X15359151Y-13828164D02* +X15378199Y-13837688D01* +X15378199Y-13837688D02* +X15387722Y-13847212D01* +X15387722Y-13847212D02* +X15397246Y-13866260D01* +X15397246Y-13866260D02* +X15406770Y-13904355D01* +X15406770Y-13904355D02* +X15406770Y-13951974D01* +X15406770Y-13951974D02* +X15397246Y-13990069D01* +X15397246Y-13990069D02* +X15387722Y-14009117D01* +X15387722Y-14009117D02* +X15378199Y-14018641D01* +X15378199Y-14018641D02* +X15359151Y-14028164D01* +X15359151Y-14028164D02* +X15340103Y-14028164D01* +X15340103Y-14028164D02* +X15321056Y-14018641D01* +X15321056Y-14018641D02* +X15311532Y-14009117D01* +X15311532Y-14009117D02* +X15302008Y-13990069D01* +X15302008Y-13990069D02* +X15292484Y-13951974D01* +X15292484Y-13951974D02* +X15292484Y-13904355D01* +X15292484Y-13904355D02* +X15302008Y-13866260D01* +X15302008Y-13866260D02* +X15311532Y-13847212D01* +X15311532Y-13847212D02* +X15321056Y-13837688D01* +X15321056Y-13837688D02* +X15340103Y-13828164D01* +X15492484Y-14009117D02* +X15502008Y-14018641D01* +X15502008Y-14018641D02* +X15492484Y-14028164D01* +X15492484Y-14028164D02* +X15482961Y-14018641D01* +X15482961Y-14018641D02* +X15492484Y-14009117D01* +X15492484Y-14009117D02* +X15492484Y-14028164D01* +X15692484Y-14028164D02* +X15578199Y-14028164D01* +X15635341Y-14028164D02* +X15635341Y-13828164D01* +X15635341Y-13828164D02* +X15616294Y-13856736D01* +X15616294Y-13856736D02* +X15597246Y-13875784D01* +X15597246Y-13875784D02* +X15578199Y-13885307D01* +X15816294Y-13828164D02* +X15835342Y-13828164D01* +X15835342Y-13828164D02* +X15854389Y-13837688D01* +X15854389Y-13837688D02* +X15863913Y-13847212D01* +X15863913Y-13847212D02* +X15873437Y-13866260D01* +X15873437Y-13866260D02* +X15882961Y-13904355D01* +X15882961Y-13904355D02* +X15882961Y-13951974D01* +X15882961Y-13951974D02* +X15873437Y-13990069D01* +X15873437Y-13990069D02* +X15863913Y-14009117D01* +X15863913Y-14009117D02* +X15854389Y-14018641D01* +X15854389Y-14018641D02* +X15835342Y-14028164D01* +X15835342Y-14028164D02* +X15816294Y-14028164D01* +X15816294Y-14028164D02* +X15797246Y-14018641D01* +X15797246Y-14018641D02* +X15787722Y-14009117D01* +X15787722Y-14009117D02* +X15778199Y-13990069D01* +X15778199Y-13990069D02* +X15768675Y-13951974D01* +X15768675Y-13951974D02* +X15768675Y-13904355D01* +X15768675Y-13904355D02* +X15778199Y-13866260D01* +X15778199Y-13866260D02* +X15787722Y-13847212D01* +X15787722Y-13847212D02* +X15797246Y-13837688D01* +X15797246Y-13837688D02* +X15816294Y-13828164D01* +X16054389Y-13828164D02* +X16016294Y-13828164D01* +X16016294Y-13828164D02* +X15997246Y-13837688D01* +X15997246Y-13837688D02* +X15987722Y-13847212D01* +X15987722Y-13847212D02* +X15968675Y-13875784D01* +X15968675Y-13875784D02* +X15959151Y-13913879D01* +X15959151Y-13913879D02* +X15959151Y-13990069D01* +X15959151Y-13990069D02* +X15968675Y-14009117D01* +X15968675Y-14009117D02* +X15978199Y-14018641D01* +X15978199Y-14018641D02* +X15997246Y-14028164D01* +X15997246Y-14028164D02* +X16035342Y-14028164D01* +X16035342Y-14028164D02* +X16054389Y-14018641D01* +X16054389Y-14018641D02* +X16063913Y-14009117D01* +X16063913Y-14009117D02* +X16073437Y-13990069D01* +X16073437Y-13990069D02* +X16073437Y-13942450D01* +X16073437Y-13942450D02* +X16063913Y-13923403D01* +X16063913Y-13923403D02* +X16054389Y-13913879D01* +X16054389Y-13913879D02* +X16035342Y-13904355D01* +X16035342Y-13904355D02* +X15997246Y-13904355D01* +X15997246Y-13904355D02* +X15978199Y-13913879D01* +X15978199Y-13913879D02* +X15968675Y-13923403D01* +X15968675Y-13923403D02* +X15959151Y-13942450D01* +X16140103Y-13828164D02* +X16263913Y-13828164D01* +X16263913Y-13828164D02* +X16197246Y-13904355D01* +X16197246Y-13904355D02* +X16225818Y-13904355D01* +X16225818Y-13904355D02* +X16244865Y-13913879D01* +X16244865Y-13913879D02* +X16254389Y-13923403D01* +X16254389Y-13923403D02* +X16263913Y-13942450D01* +X16263913Y-13942450D02* +X16263913Y-13990069D01* +X16263913Y-13990069D02* +X16254389Y-14009117D01* +X16254389Y-14009117D02* +X16244865Y-14018641D01* +X16244865Y-14018641D02* +X16225818Y-14028164D01* +X16225818Y-14028164D02* +X16168675Y-14028164D01* +X16168675Y-14028164D02* +X16149627Y-14018641D01* +X16149627Y-14018641D02* +X16140103Y-14009117D01* +X16340103Y-13828164D02* +X16340103Y-13866260D01* +X16416294Y-13828164D02* +X16416294Y-13866260D01* +X16679151Y-14104355D02* +X16669627Y-14094831D01* +X16669627Y-14094831D02* +X16650580Y-14066260D01* +X16650580Y-14066260D02* +X16641056Y-14047212D01* +X16641056Y-14047212D02* +X16631532Y-14018641D01* +X16631532Y-14018641D02* +X16622008Y-13971022D01* +X16622008Y-13971022D02* +X16622008Y-13932926D01* +X16622008Y-13932926D02* +X16631532Y-13885307D01* +X16631532Y-13885307D02* +X16641056Y-13856736D01* +X16641056Y-13856736D02* +X16650580Y-13837688D01* +X16650580Y-13837688D02* +X16669627Y-13809117D01* +X16669627Y-13809117D02* +X16679151Y-13799593D01* +X16793437Y-13828164D02* +X16812485Y-13828164D01* +X16812485Y-13828164D02* +X16831532Y-13837688D01* +X16831532Y-13837688D02* +X16841056Y-13847212D01* +X16841056Y-13847212D02* +X16850580Y-13866260D01* +X16850580Y-13866260D02* +X16860104Y-13904355D01* +X16860104Y-13904355D02* +X16860104Y-13951974D01* +X16860104Y-13951974D02* +X16850580Y-13990069D01* +X16850580Y-13990069D02* +X16841056Y-14009117D01* +X16841056Y-14009117D02* +X16831532Y-14018641D01* +X16831532Y-14018641D02* +X16812485Y-14028164D01* +X16812485Y-14028164D02* +X16793437Y-14028164D01* +X16793437Y-14028164D02* +X16774389Y-14018641D01* +X16774389Y-14018641D02* +X16764865Y-14009117D01* +X16764865Y-14009117D02* +X16755342Y-13990069D01* +X16755342Y-13990069D02* +X16745818Y-13951974D01* +X16745818Y-13951974D02* +X16745818Y-13904355D01* +X16745818Y-13904355D02* +X16755342Y-13866260D01* +X16755342Y-13866260D02* +X16764865Y-13847212D01* +X16764865Y-13847212D02* +X16774389Y-13837688D01* +X16774389Y-13837688D02* +X16793437Y-13828164D01* +X17065818Y-14028164D02* +X17065818Y-13828164D01* +X17151532Y-14028164D02* +X17151532Y-13923403D01* +X17151532Y-13923403D02* +X17142008Y-13904355D01* +X17142008Y-13904355D02* +X17122961Y-13894831D01* +X17122961Y-13894831D02* +X17094389Y-13894831D01* +X17094389Y-13894831D02* +X17075342Y-13904355D01* +X17075342Y-13904355D02* +X17065818Y-13913879D01* +X17275342Y-14028164D02* +X17256294Y-14018641D01* +X17256294Y-14018641D02* +X17246770Y-14009117D01* +X17246770Y-14009117D02* +X17237246Y-13990069D01* +X17237246Y-13990069D02* +X17237246Y-13932926D01* +X17237246Y-13932926D02* +X17246770Y-13913879D01* +X17246770Y-13913879D02* +X17256294Y-13904355D01* +X17256294Y-13904355D02* +X17275342Y-13894831D01* +X17275342Y-13894831D02* +X17303913Y-13894831D01* +X17303913Y-13894831D02* +X17322961Y-13904355D01* +X17322961Y-13904355D02* +X17332485Y-13913879D01* +X17332485Y-13913879D02* +X17342008Y-13932926D01* +X17342008Y-13932926D02* +X17342008Y-13990069D01* +X17342008Y-13990069D02* +X17332485Y-14009117D01* +X17332485Y-14009117D02* +X17322961Y-14018641D01* +X17322961Y-14018641D02* +X17303913Y-14028164D01* +X17303913Y-14028164D02* +X17275342Y-14028164D01* +X17456294Y-14028164D02* +X17437246Y-14018641D01* +X17437246Y-14018641D02* +X17427723Y-13999593D01* +X17427723Y-13999593D02* +X17427723Y-13828164D01* +X17608675Y-14018641D02* +X17589627Y-14028164D01* +X17589627Y-14028164D02* +X17551532Y-14028164D01* +X17551532Y-14028164D02* +X17532485Y-14018641D01* +X17532485Y-14018641D02* +X17522961Y-13999593D01* +X17522961Y-13999593D02* +X17522961Y-13923403D01* +X17522961Y-13923403D02* +X17532485Y-13904355D01* +X17532485Y-13904355D02* +X17551532Y-13894831D01* +X17551532Y-13894831D02* +X17589627Y-13894831D01* +X17589627Y-13894831D02* +X17608675Y-13904355D01* +X17608675Y-13904355D02* +X17618199Y-13923403D01* +X17618199Y-13923403D02* +X17618199Y-13942450D01* +X17618199Y-13942450D02* +X17522961Y-13961498D01* +X17694389Y-14018641D02* +X17713437Y-14028164D01* +X17713437Y-14028164D02* +X17751532Y-14028164D01* +X17751532Y-14028164D02* +X17770580Y-14018641D01* +X17770580Y-14018641D02* +X17780104Y-13999593D01* +X17780104Y-13999593D02* +X17780104Y-13990069D01* +X17780104Y-13990069D02* +X17770580Y-13971022D01* +X17770580Y-13971022D02* +X17751532Y-13961498D01* +X17751532Y-13961498D02* +X17722961Y-13961498D01* +X17722961Y-13961498D02* +X17703913Y-13951974D01* +X17703913Y-13951974D02* +X17694389Y-13932926D01* +X17694389Y-13932926D02* +X17694389Y-13923403D01* +X17694389Y-13923403D02* +X17703913Y-13904355D01* +X17703913Y-13904355D02* +X17722961Y-13894831D01* +X17722961Y-13894831D02* +X17751532Y-13894831D01* +X17751532Y-13894831D02* +X17770580Y-13904355D01* +X17985818Y-13951974D02* +X18138199Y-13951974D01* +X18062008Y-14028164D02* +X18062008Y-13875784D01* +X18343913Y-13847212D02* +X18353437Y-13837688D01* +X18353437Y-13837688D02* +X18372485Y-13828164D01* +X18372485Y-13828164D02* +X18420104Y-13828164D01* +X18420104Y-13828164D02* +X18439151Y-13837688D01* +X18439151Y-13837688D02* +X18448675Y-13847212D01* +X18448675Y-13847212D02* +X18458199Y-13866260D01* +X18458199Y-13866260D02* +X18458199Y-13885307D01* +X18458199Y-13885307D02* +X18448675Y-13913879D01* +X18448675Y-13913879D02* +X18334389Y-14028164D01* +X18334389Y-14028164D02* +X18458199Y-14028164D01* +X18654389Y-14018641D02* +X18673437Y-14028164D01* +X18673437Y-14028164D02* +X18711532Y-14028164D01* +X18711532Y-14028164D02* +X18730580Y-14018641D01* +X18730580Y-14018641D02* +X18740104Y-13999593D01* +X18740104Y-13999593D02* +X18740104Y-13990069D01* +X18740104Y-13990069D02* +X18730580Y-13971022D01* +X18730580Y-13971022D02* +X18711532Y-13961498D01* +X18711532Y-13961498D02* +X18682961Y-13961498D01* +X18682961Y-13961498D02* +X18663913Y-13951974D01* +X18663913Y-13951974D02* +X18654389Y-13932926D01* +X18654389Y-13932926D02* +X18654389Y-13923403D01* +X18654389Y-13923403D02* +X18663913Y-13904355D01* +X18663913Y-13904355D02* +X18682961Y-13894831D01* +X18682961Y-13894831D02* +X18711532Y-13894831D01* +X18711532Y-13894831D02* +X18730580Y-13904355D01* +X18854389Y-14028164D02* +X18835342Y-14018641D01* +X18835342Y-14018641D02* +X18825818Y-13999593D01* +X18825818Y-13999593D02* +X18825818Y-13828164D01* +X18959151Y-14028164D02* +X18940104Y-14018641D01* +X18940104Y-14018641D02* +X18930580Y-14009117D01* +X18930580Y-14009117D02* +X18921056Y-13990069D01* +X18921056Y-13990069D02* +X18921056Y-13932926D01* +X18921056Y-13932926D02* +X18930580Y-13913879D01* +X18930580Y-13913879D02* +X18940104Y-13904355D01* +X18940104Y-13904355D02* +X18959151Y-13894831D01* +X18959151Y-13894831D02* +X18987723Y-13894831D01* +X18987723Y-13894831D02* +X19006770Y-13904355D01* +X19006770Y-13904355D02* +X19016294Y-13913879D01* +X19016294Y-13913879D02* +X19025818Y-13932926D01* +X19025818Y-13932926D02* +X19025818Y-13990069D01* +X19025818Y-13990069D02* +X19016294Y-14009117D01* +X19016294Y-14009117D02* +X19006770Y-14018641D01* +X19006770Y-14018641D02* +X18987723Y-14028164D01* +X18987723Y-14028164D02* +X18959151Y-14028164D01* +X19082961Y-13894831D02* +X19159151Y-13894831D01* +X19111532Y-13828164D02* +X19111532Y-13999593D01* +X19111532Y-13999593D02* +X19121056Y-14018641D01* +X19121056Y-14018641D02* +X19140104Y-14028164D01* +X19140104Y-14028164D02* +X19159151Y-14028164D01* +X19216294Y-14018641D02* +X19235342Y-14028164D01* +X19235342Y-14028164D02* +X19273437Y-14028164D01* +X19273437Y-14028164D02* +X19292485Y-14018641D01* +X19292485Y-14018641D02* +X19302008Y-13999593D01* +X19302008Y-13999593D02* +X19302008Y-13990069D01* +X19302008Y-13990069D02* +X19292485Y-13971022D01* +X19292485Y-13971022D02* +X19273437Y-13961498D01* +X19273437Y-13961498D02* +X19244866Y-13961498D01* +X19244866Y-13961498D02* +X19225818Y-13951974D01* +X19225818Y-13951974D02* +X19216294Y-13932926D01* +X19216294Y-13932926D02* +X19216294Y-13923403D01* +X19216294Y-13923403D02* +X19225818Y-13904355D01* +X19225818Y-13904355D02* +X19244866Y-13894831D01* +X19244866Y-13894831D02* +X19273437Y-13894831D01* +X19273437Y-13894831D02* +X19292485Y-13904355D01* +X19368675Y-14104355D02* +X19378199Y-14094831D01* +X19378199Y-14094831D02* +X19397247Y-14066260D01* +X19397247Y-14066260D02* +X19406770Y-14047212D01* +X19406770Y-14047212D02* +X19416294Y-14018641D01* +X19416294Y-14018641D02* +X19425818Y-13971022D01* +X19425818Y-13971022D02* +X19425818Y-13932926D01* +X19425818Y-13932926D02* +X19416294Y-13885307D01* +X19416294Y-13885307D02* +X19406770Y-13856736D01* +X19406770Y-13856736D02* +X19397247Y-13837688D01* +X19397247Y-13837688D02* +X19378199Y-13809117D01* +X19378199Y-13809117D02* +X19368675Y-13799593D01* +X19698199Y-14104355D02* +X19688675Y-14094831D01* +X19688675Y-14094831D02* +X19669627Y-14066260D01* +X19669627Y-14066260D02* +X19660104Y-14047212D01* +X19660104Y-14047212D02* +X19650580Y-14018641D01* +X19650580Y-14018641D02* +X19641056Y-13971022D01* +X19641056Y-13971022D02* +X19641056Y-13932926D01* +X19641056Y-13932926D02* +X19650580Y-13885307D01* +X19650580Y-13885307D02* +X19660104Y-13856736D01* +X19660104Y-13856736D02* +X19669627Y-13837688D01* +X19669627Y-13837688D02* +X19688675Y-13809117D01* +X19688675Y-13809117D02* +X19698199Y-13799593D01* +X19774389Y-13894831D02* +X19774389Y-14028164D01* +X19774389Y-13913879D02* +X19783913Y-13904355D01* +X19783913Y-13904355D02* +X19802961Y-13894831D01* +X19802961Y-13894831D02* +X19831532Y-13894831D01* +X19831532Y-13894831D02* +X19850580Y-13904355D01* +X19850580Y-13904355D02* +X19860104Y-13923403D01* +X19860104Y-13923403D02* +X19860104Y-14028164D01* +X19983913Y-14028164D02* +X19964866Y-14018641D01* +X19964866Y-14018641D02* +X19955342Y-14009117D01* +X19955342Y-14009117D02* +X19945818Y-13990069D01* +X19945818Y-13990069D02* +X19945818Y-13932926D01* +X19945818Y-13932926D02* +X19955342Y-13913879D01* +X19955342Y-13913879D02* +X19964866Y-13904355D01* +X19964866Y-13904355D02* +X19983913Y-13894831D01* +X19983913Y-13894831D02* +X20012485Y-13894831D01* +X20012485Y-13894831D02* +X20031532Y-13904355D01* +X20031532Y-13904355D02* +X20041056Y-13913879D01* +X20041056Y-13913879D02* +X20050580Y-13932926D01* +X20050580Y-13932926D02* +X20050580Y-13990069D01* +X20050580Y-13990069D02* +X20041056Y-14009117D01* +X20041056Y-14009117D02* +X20031532Y-14018641D01* +X20031532Y-14018641D02* +X20012485Y-14028164D01* +X20012485Y-14028164D02* +X19983913Y-14028164D01* +X20107723Y-13894831D02* +X20183913Y-13894831D01* +X20136294Y-13828164D02* +X20136294Y-13999593D01* +X20136294Y-13999593D02* +X20145818Y-14018641D01* +X20145818Y-14018641D02* +X20164866Y-14028164D01* +X20164866Y-14028164D02* +X20183913Y-14028164D01* +X20370580Y-13894831D02* +X20370580Y-14094831D01* +X20370580Y-13904355D02* +X20389627Y-13894831D01* +X20389627Y-13894831D02* +X20427723Y-13894831D01* +X20427723Y-13894831D02* +X20446770Y-13904355D01* +X20446770Y-13904355D02* +X20456294Y-13913879D01* +X20456294Y-13913879D02* +X20465818Y-13932926D01* +X20465818Y-13932926D02* +X20465818Y-13990069D01* +X20465818Y-13990069D02* +X20456294Y-14009117D01* +X20456294Y-14009117D02* +X20446770Y-14018641D01* +X20446770Y-14018641D02* +X20427723Y-14028164D01* +X20427723Y-14028164D02* +X20389627Y-14028164D01* +X20389627Y-14028164D02* +X20370580Y-14018641D01* +X20580104Y-14028164D02* +X20561056Y-14018641D01* +X20561056Y-14018641D02* +X20551532Y-13999593D01* +X20551532Y-13999593D02* +X20551532Y-13828164D01* +X20742008Y-14028164D02* +X20742008Y-13923403D01* +X20742008Y-13923403D02* +X20732485Y-13904355D01* +X20732485Y-13904355D02* +X20713437Y-13894831D01* +X20713437Y-13894831D02* +X20675342Y-13894831D01* +X20675342Y-13894831D02* +X20656294Y-13904355D01* +X20742008Y-14018641D02* +X20722961Y-14028164D01* +X20722961Y-14028164D02* +X20675342Y-14028164D01* +X20675342Y-14028164D02* +X20656294Y-14018641D01* +X20656294Y-14018641D02* +X20646770Y-13999593D01* +X20646770Y-13999593D02* +X20646770Y-13980545D01* +X20646770Y-13980545D02* +X20656294Y-13961498D01* +X20656294Y-13961498D02* +X20675342Y-13951974D01* +X20675342Y-13951974D02* +X20722961Y-13951974D01* +X20722961Y-13951974D02* +X20742008Y-13942450D01* +X20808675Y-13894831D02* +X20884866Y-13894831D01* +X20837247Y-13828164D02* +X20837247Y-13999593D01* +X20837247Y-13999593D02* +X20846770Y-14018641D01* +X20846770Y-14018641D02* +X20865818Y-14028164D01* +X20865818Y-14028164D02* +X20884866Y-14028164D01* +X21027723Y-14018641D02* +X21008675Y-14028164D01* +X21008675Y-14028164D02* +X20970580Y-14028164D01* +X20970580Y-14028164D02* +X20951532Y-14018641D01* +X20951532Y-14018641D02* +X20942008Y-13999593D01* +X20942008Y-13999593D02* +X20942008Y-13923403D01* +X20942008Y-13923403D02* +X20951532Y-13904355D01* +X20951532Y-13904355D02* +X20970580Y-13894831D01* +X20970580Y-13894831D02* +X21008675Y-13894831D01* +X21008675Y-13894831D02* +X21027723Y-13904355D01* +X21027723Y-13904355D02* +X21037247Y-13923403D01* +X21037247Y-13923403D02* +X21037247Y-13942450D01* +X21037247Y-13942450D02* +X20942008Y-13961498D01* +X21208675Y-14028164D02* +X21208675Y-13828164D01* +X21208675Y-14018641D02* +X21189628Y-14028164D01* +X21189628Y-14028164D02* +X21151532Y-14028164D01* +X21151532Y-14028164D02* +X21132485Y-14018641D01* +X21132485Y-14018641D02* +X21122961Y-14009117D01* +X21122961Y-14009117D02* +X21113437Y-13990069D01* +X21113437Y-13990069D02* +X21113437Y-13932926D01* +X21113437Y-13932926D02* +X21122961Y-13913879D01* +X21122961Y-13913879D02* +X21132485Y-13904355D01* +X21132485Y-13904355D02* +X21151532Y-13894831D01* +X21151532Y-13894831D02* +X21189628Y-13894831D01* +X21189628Y-13894831D02* +X21208675Y-13904355D01* +X21284866Y-14104355D02* +X21294389Y-14094831D01* +X21294389Y-14094831D02* +X21313437Y-14066260D01* +X21313437Y-14066260D02* +X21322961Y-14047212D01* +X21322961Y-14047212D02* +X21332485Y-14018641D01* +X21332485Y-14018641D02* +X21342008Y-13971022D01* +X21342008Y-13971022D02* +X21342008Y-13932926D01* +X21342008Y-13932926D02* +X21332485Y-13885307D01* +X21332485Y-13885307D02* +X21322961Y-13856736D01* +X21322961Y-13856736D02* +X21313437Y-13837688D01* +X21313437Y-13837688D02* +X21294389Y-13809117D01* +X21294389Y-13809117D02* +X21284866Y-13799593D01* +M02* diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-NPTH-drl_map.svg b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-NPTH-drl_map.svg new file mode 100755 index 0000000..8fba9d0 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-NPTH-drl_map.svg @@ -0,0 +1,1648 @@ + + + +SVG Image created as StudioMic-NPTH-drl_map.svg date 2023/03/18 07:42:17 + Image generated by PCBNEW + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Drill Map: +Drill Map: + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +2.700mm / 0.1063" (0 holes + 2 slots) (not plated) +2.700mm / 0.1063" (0 holes + 2 slots) (not plated) + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-NPTH.drl b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-NPTH.drl new file mode 100755 index 0000000..ac9d219 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-NPTH.drl @@ -0,0 +1,26 @@ +M48 +; DRILL file {KiCad (7.0.0)} date Sat Mar 18 07:42:17 2023 +; FORMAT={-:-/ absolute / metric / decimal} +; #@! TF.CreationDate,2023-03-18T07:42:17+03:00 +; #@! TF.GenerationSoftware,Kicad,Pcbnew,(7.0.0) +; #@! TF.FileFunction,NonPlated,1,2,NPTH +FMAT,2 +METRIC +; #@! TA.AperFunction,NonPlated,NPTH,ComponentDrill +T1C2.700 +% +G90 +G05 +T1 +G00X137.744Y-51.397 +M15 +G01X138.544Y-51.397 +M16 +G05 +G00X166.744Y-51.397 +M15 +G01X167.544Y-51.397 +M16 +G05 +T0 +M30 diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-PTH-drl_map.gbr b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-PTH-drl_map.gbr new file mode 100755 index 0000000..7347908 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-PTH-drl_map.gbr @@ -0,0 +1,787 @@ +%TF.GenerationSoftware,KiCad,Pcbnew,(7.0.0)*% +%TF.CreationDate,2023-03-18T07:42:10+03:00*% +%TF.ProjectId,StudioMic,53747564-696f-44d6-9963-2e6b69636164,1*% +%TF.SameCoordinates,Original*% +%TF.FileFunction,Drillmap*% +%TF.FilePolarity,Positive*% +%FSLAX45Y45*% +G04 Gerber Fmt 4.5, Leading zero omitted, Abs format (unit mm)* +G04 Created by KiCad (PCBNEW (7.0.0)) date 2023-03-18 07:42:10* +%MOMM*% +%LPD*% +G01* +G04 APERTURE LIST* +%ADD10C,0.100000*% +%ADD11C,0.200000*% +G04 APERTURE END LIST* +D10* +X16964362Y-13014065D02* +X16973562Y-13014065D01* +X13862062Y-13309511D02* +G75* +G03* +X13566438Y-13013888I-295622J2D01* +G01* +X13566438Y-13013888D02* +X13557238Y-13013888D01* +X17309284Y-4937321D02* +G75* +G03* +X17181650Y-4809688I-127633J0D01* +G01* +X13347022Y-4809688D02* +G75* +G03* +X13219389Y-4937321I0J-127633D01* +G01* +X13219389Y-4937321D02* +X13557238Y-13013888D01* +X13347022Y-4809688D02* +X17181650Y-4809688D01* +X17309284Y-4937321D02* +X16973562Y-13014065D01* +X16964362Y-13014068D02* +G75* +G03* +X16668738Y-13309688I-2J-295622D01* +G01* +X13862061Y-13309511D02* +X16668738Y-13309688D01* +D11* +D10* +X14326400Y-10783100D02* +X14426400Y-10883100D01* +X14426400Y-10783100D02* +X14326400Y-10883100D01* +X14453400Y-5906300D02* +X14553400Y-6006300D01* +X14553400Y-5906300D02* +X14453400Y-6006300D01* +X14745500Y-7773200D02* +X14845500Y-7873200D01* +X14845500Y-7773200D02* +X14745500Y-7873200D01* +X14989150Y-7125500D02* +X15089150Y-7225500D01* +X15089150Y-7125500D02* +X14989150Y-7225500D01* +X15113800Y-10643400D02* +X15213800Y-10743400D01* +X15213800Y-10643400D02* +X15113800Y-10743400D01* +X15291600Y-5931700D02* +X15391600Y-6031700D01* +X15391600Y-5931700D02* +X15291600Y-6031700D01* +X15317000Y-7722400D02* +X15417000Y-7822400D01* +X15417000Y-7722400D02* +X15317000Y-7822400D01* +X15432250Y-6732750D02* +X15532250Y-6832750D01* +X15532250Y-6732750D02* +X15432250Y-6832750D01* +X15774200Y-5588800D02* +X15874200Y-5688800D01* +X15874200Y-5588800D02* +X15774200Y-5688800D01* +X16218700Y-5753900D02* +X16318700Y-5853900D01* +X16318700Y-5753900D02* +X16218700Y-5853900D01* +X16282200Y-10351300D02* +X16382200Y-10451300D01* +X16382200Y-10351300D02* +X16282200Y-10451300D01* +X16282200Y-10859300D02* +X16382200Y-10959300D01* +X16382200Y-10859300D02* +X16282200Y-10959300D01* +D11* +X13462008Y-13608164D02* +X13462008Y-13408164D01* +X13462008Y-13408164D02* +X13509627Y-13408164D01* +X13509627Y-13408164D02* +X13538199Y-13417688D01* +X13538199Y-13417688D02* +X13557246Y-13436736D01* +X13557246Y-13436736D02* +X13566770Y-13455784D01* +X13566770Y-13455784D02* +X13576294Y-13493879D01* +X13576294Y-13493879D02* +X13576294Y-13522450D01* +X13576294Y-13522450D02* +X13566770Y-13560545D01* +X13566770Y-13560545D02* +X13557246Y-13579593D01* +X13557246Y-13579593D02* +X13538199Y-13598641D01* +X13538199Y-13598641D02* +X13509627Y-13608164D01* +X13509627Y-13608164D02* +X13462008Y-13608164D01* +X13662008Y-13608164D02* +X13662008Y-13474831D01* +X13662008Y-13512926D02* +X13671532Y-13493879D01* +X13671532Y-13493879D02* +X13681056Y-13484355D01* +X13681056Y-13484355D02* +X13700103Y-13474831D01* +X13700103Y-13474831D02* +X13719151Y-13474831D01* +X13785818Y-13608164D02* +X13785818Y-13474831D01* +X13785818Y-13408164D02* +X13776294Y-13417688D01* +X13776294Y-13417688D02* +X13785818Y-13427212D01* +X13785818Y-13427212D02* +X13795341Y-13417688D01* +X13795341Y-13417688D02* +X13785818Y-13408164D01* +X13785818Y-13408164D02* +X13785818Y-13427212D01* +X13909627Y-13608164D02* +X13890579Y-13598641D01* +X13890579Y-13598641D02* +X13881056Y-13579593D01* +X13881056Y-13579593D02* +X13881056Y-13408164D01* +X14014389Y-13608164D02* +X13995341Y-13598641D01* +X13995341Y-13598641D02* +X13985818Y-13579593D01* +X13985818Y-13579593D02* +X13985818Y-13408164D01* +X14210579Y-13608164D02* +X14210579Y-13408164D01* +X14210579Y-13408164D02* +X14277246Y-13551022D01* +X14277246Y-13551022D02* +X14343913Y-13408164D01* +X14343913Y-13408164D02* +X14343913Y-13608164D01* +X14524865Y-13608164D02* +X14524865Y-13503403D01* +X14524865Y-13503403D02* +X14515341Y-13484355D01* +X14515341Y-13484355D02* +X14496294Y-13474831D01* +X14496294Y-13474831D02* +X14458198Y-13474831D01* +X14458198Y-13474831D02* +X14439151Y-13484355D01* +X14524865Y-13598641D02* +X14505818Y-13608164D01* +X14505818Y-13608164D02* +X14458198Y-13608164D01* +X14458198Y-13608164D02* +X14439151Y-13598641D01* +X14439151Y-13598641D02* +X14429627Y-13579593D01* +X14429627Y-13579593D02* +X14429627Y-13560545D01* +X14429627Y-13560545D02* +X14439151Y-13541498D01* +X14439151Y-13541498D02* +X14458198Y-13531974D01* +X14458198Y-13531974D02* +X14505818Y-13531974D01* +X14505818Y-13531974D02* +X14524865Y-13522450D01* +X14620103Y-13474831D02* +X14620103Y-13674831D01* +X14620103Y-13484355D02* +X14639151Y-13474831D01* +X14639151Y-13474831D02* +X14677246Y-13474831D01* +X14677246Y-13474831D02* +X14696294Y-13484355D01* +X14696294Y-13484355D02* +X14705818Y-13493879D01* +X14705818Y-13493879D02* +X14715341Y-13512926D01* +X14715341Y-13512926D02* +X14715341Y-13570069D01* +X14715341Y-13570069D02* +X14705818Y-13589117D01* +X14705818Y-13589117D02* +X14696294Y-13598641D01* +X14696294Y-13598641D02* +X14677246Y-13608164D01* +X14677246Y-13608164D02* +X14639151Y-13608164D01* +X14639151Y-13608164D02* +X14620103Y-13598641D01* +X14801056Y-13589117D02* +X14810579Y-13598641D01* +X14810579Y-13598641D02* +X14801056Y-13608164D01* +X14801056Y-13608164D02* +X14791532Y-13598641D01* +X14791532Y-13598641D02* +X14801056Y-13589117D01* +X14801056Y-13589117D02* +X14801056Y-13608164D01* +X14801056Y-13484355D02* +X14810579Y-13493879D01* +X14810579Y-13493879D02* +X14801056Y-13503403D01* +X14801056Y-13503403D02* +X14791532Y-13493879D01* +X14791532Y-13493879D02* +X14801056Y-13484355D01* +X14801056Y-13484355D02* +X14801056Y-13503403D01* +D10* +X13114389Y-13904688D02* +X13214389Y-14004688D01* +X13214389Y-13904688D02* +X13114389Y-14004688D01* +D11* +X13566770Y-14028164D02* +X13452484Y-14028164D01* +X13509627Y-14028164D02* +X13509627Y-13828164D01* +X13509627Y-13828164D02* +X13490579Y-13856736D01* +X13490579Y-13856736D02* +X13471532Y-13875784D01* +X13471532Y-13875784D02* +X13452484Y-13885307D01* +X13652484Y-14009117D02* +X13662008Y-14018641D01* +X13662008Y-14018641D02* +X13652484Y-14028164D01* +X13652484Y-14028164D02* +X13642960Y-14018641D01* +X13642960Y-14018641D02* +X13652484Y-14009117D01* +X13652484Y-14009117D02* +X13652484Y-14028164D01* +X13785818Y-13828164D02* +X13804865Y-13828164D01* +X13804865Y-13828164D02* +X13823913Y-13837688D01* +X13823913Y-13837688D02* +X13833437Y-13847212D01* +X13833437Y-13847212D02* +X13842960Y-13866260D01* +X13842960Y-13866260D02* +X13852484Y-13904355D01* +X13852484Y-13904355D02* +X13852484Y-13951974D01* +X13852484Y-13951974D02* +X13842960Y-13990069D01* +X13842960Y-13990069D02* +X13833437Y-14009117D01* +X13833437Y-14009117D02* +X13823913Y-14018641D01* +X13823913Y-14018641D02* +X13804865Y-14028164D01* +X13804865Y-14028164D02* +X13785818Y-14028164D01* +X13785818Y-14028164D02* +X13766770Y-14018641D01* +X13766770Y-14018641D02* +X13757246Y-14009117D01* +X13757246Y-14009117D02* +X13747722Y-13990069D01* +X13747722Y-13990069D02* +X13738199Y-13951974D01* +X13738199Y-13951974D02* +X13738199Y-13904355D01* +X13738199Y-13904355D02* +X13747722Y-13866260D01* +X13747722Y-13866260D02* +X13757246Y-13847212D01* +X13757246Y-13847212D02* +X13766770Y-13837688D01* +X13766770Y-13837688D02* +X13785818Y-13828164D01* +X13976294Y-13828164D02* +X13995341Y-13828164D01* +X13995341Y-13828164D02* +X14014389Y-13837688D01* +X14014389Y-13837688D02* +X14023913Y-13847212D01* +X14023913Y-13847212D02* +X14033437Y-13866260D01* +X14033437Y-13866260D02* +X14042960Y-13904355D01* +X14042960Y-13904355D02* +X14042960Y-13951974D01* +X14042960Y-13951974D02* +X14033437Y-13990069D01* +X14033437Y-13990069D02* +X14023913Y-14009117D01* +X14023913Y-14009117D02* +X14014389Y-14018641D01* +X14014389Y-14018641D02* +X13995341Y-14028164D01* +X13995341Y-14028164D02* +X13976294Y-14028164D01* +X13976294Y-14028164D02* +X13957246Y-14018641D01* +X13957246Y-14018641D02* +X13947722Y-14009117D01* +X13947722Y-14009117D02* +X13938199Y-13990069D01* +X13938199Y-13990069D02* +X13928675Y-13951974D01* +X13928675Y-13951974D02* +X13928675Y-13904355D01* +X13928675Y-13904355D02* +X13938199Y-13866260D01* +X13938199Y-13866260D02* +X13947722Y-13847212D01* +X13947722Y-13847212D02* +X13957246Y-13837688D01* +X13957246Y-13837688D02* +X13976294Y-13828164D01* +X14166770Y-13828164D02* +X14185818Y-13828164D01* +X14185818Y-13828164D02* +X14204865Y-13837688D01* +X14204865Y-13837688D02* +X14214389Y-13847212D01* +X14214389Y-13847212D02* +X14223913Y-13866260D01* +X14223913Y-13866260D02* +X14233437Y-13904355D01* +X14233437Y-13904355D02* +X14233437Y-13951974D01* +X14233437Y-13951974D02* +X14223913Y-13990069D01* +X14223913Y-13990069D02* +X14214389Y-14009117D01* +X14214389Y-14009117D02* +X14204865Y-14018641D01* +X14204865Y-14018641D02* +X14185818Y-14028164D01* +X14185818Y-14028164D02* +X14166770Y-14028164D01* +X14166770Y-14028164D02* +X14147722Y-14018641D01* +X14147722Y-14018641D02* +X14138199Y-14009117D01* +X14138199Y-14009117D02* +X14128675Y-13990069D01* +X14128675Y-13990069D02* +X14119151Y-13951974D01* +X14119151Y-13951974D02* +X14119151Y-13904355D01* +X14119151Y-13904355D02* +X14128675Y-13866260D01* +X14128675Y-13866260D02* +X14138199Y-13847212D01* +X14138199Y-13847212D02* +X14147722Y-13837688D01* +X14147722Y-13837688D02* +X14166770Y-13828164D01* +X14319151Y-14028164D02* +X14319151Y-13894831D01* +X14319151Y-13913879D02* +X14328675Y-13904355D01* +X14328675Y-13904355D02* +X14347722Y-13894831D01* +X14347722Y-13894831D02* +X14376294Y-13894831D01* +X14376294Y-13894831D02* +X14395341Y-13904355D01* +X14395341Y-13904355D02* +X14404865Y-13923403D01* +X14404865Y-13923403D02* +X14404865Y-14028164D01* +X14404865Y-13923403D02* +X14414389Y-13904355D01* +X14414389Y-13904355D02* +X14433437Y-13894831D01* +X14433437Y-13894831D02* +X14462008Y-13894831D01* +X14462008Y-13894831D02* +X14481056Y-13904355D01* +X14481056Y-13904355D02* +X14490580Y-13923403D01* +X14490580Y-13923403D02* +X14490580Y-14028164D01* +X14585818Y-14028164D02* +X14585818Y-13894831D01* +X14585818Y-13913879D02* +X14595341Y-13904355D01* +X14595341Y-13904355D02* +X14614389Y-13894831D01* +X14614389Y-13894831D02* +X14642961Y-13894831D01* +X14642961Y-13894831D02* +X14662008Y-13904355D01* +X14662008Y-13904355D02* +X14671532Y-13923403D01* +X14671532Y-13923403D02* +X14671532Y-14028164D01* +X14671532Y-13923403D02* +X14681056Y-13904355D01* +X14681056Y-13904355D02* +X14700103Y-13894831D01* +X14700103Y-13894831D02* +X14728675Y-13894831D01* +X14728675Y-13894831D02* +X14747722Y-13904355D01* +X14747722Y-13904355D02* +X14757246Y-13923403D01* +X14757246Y-13923403D02* +X14757246Y-14028164D01* +X15115341Y-13818641D02* +X14943913Y-14075784D01* +X15340103Y-13828164D02* +X15359151Y-13828164D01* +X15359151Y-13828164D02* +X15378199Y-13837688D01* +X15378199Y-13837688D02* +X15387722Y-13847212D01* +X15387722Y-13847212D02* +X15397246Y-13866260D01* +X15397246Y-13866260D02* +X15406770Y-13904355D01* +X15406770Y-13904355D02* +X15406770Y-13951974D01* +X15406770Y-13951974D02* +X15397246Y-13990069D01* +X15397246Y-13990069D02* +X15387722Y-14009117D01* +X15387722Y-14009117D02* +X15378199Y-14018641D01* +X15378199Y-14018641D02* +X15359151Y-14028164D01* +X15359151Y-14028164D02* +X15340103Y-14028164D01* +X15340103Y-14028164D02* +X15321056Y-14018641D01* +X15321056Y-14018641D02* +X15311532Y-14009117D01* +X15311532Y-14009117D02* +X15302008Y-13990069D01* +X15302008Y-13990069D02* +X15292484Y-13951974D01* +X15292484Y-13951974D02* +X15292484Y-13904355D01* +X15292484Y-13904355D02* +X15302008Y-13866260D01* +X15302008Y-13866260D02* +X15311532Y-13847212D01* +X15311532Y-13847212D02* +X15321056Y-13837688D01* +X15321056Y-13837688D02* +X15340103Y-13828164D01* +X15492484Y-14009117D02* +X15502008Y-14018641D01* +X15502008Y-14018641D02* +X15492484Y-14028164D01* +X15492484Y-14028164D02* +X15482961Y-14018641D01* +X15482961Y-14018641D02* +X15492484Y-14009117D01* +X15492484Y-14009117D02* +X15492484Y-14028164D01* +X15625818Y-13828164D02* +X15644865Y-13828164D01* +X15644865Y-13828164D02* +X15663913Y-13837688D01* +X15663913Y-13837688D02* +X15673437Y-13847212D01* +X15673437Y-13847212D02* +X15682961Y-13866260D01* +X15682961Y-13866260D02* +X15692484Y-13904355D01* +X15692484Y-13904355D02* +X15692484Y-13951974D01* +X15692484Y-13951974D02* +X15682961Y-13990069D01* +X15682961Y-13990069D02* +X15673437Y-14009117D01* +X15673437Y-14009117D02* +X15663913Y-14018641D01* +X15663913Y-14018641D02* +X15644865Y-14028164D01* +X15644865Y-14028164D02* +X15625818Y-14028164D01* +X15625818Y-14028164D02* +X15606770Y-14018641D01* +X15606770Y-14018641D02* +X15597246Y-14009117D01* +X15597246Y-14009117D02* +X15587722Y-13990069D01* +X15587722Y-13990069D02* +X15578199Y-13951974D01* +X15578199Y-13951974D02* +X15578199Y-13904355D01* +X15578199Y-13904355D02* +X15587722Y-13866260D01* +X15587722Y-13866260D02* +X15597246Y-13847212D01* +X15597246Y-13847212D02* +X15606770Y-13837688D01* +X15606770Y-13837688D02* +X15625818Y-13828164D01* +X15759151Y-13828164D02* +X15882961Y-13828164D01* +X15882961Y-13828164D02* +X15816294Y-13904355D01* +X15816294Y-13904355D02* +X15844865Y-13904355D01* +X15844865Y-13904355D02* +X15863913Y-13913879D01* +X15863913Y-13913879D02* +X15873437Y-13923403D01* +X15873437Y-13923403D02* +X15882961Y-13942450D01* +X15882961Y-13942450D02* +X15882961Y-13990069D01* +X15882961Y-13990069D02* +X15873437Y-14009117D01* +X15873437Y-14009117D02* +X15863913Y-14018641D01* +X15863913Y-14018641D02* +X15844865Y-14028164D01* +X15844865Y-14028164D02* +X15787722Y-14028164D01* +X15787722Y-14028164D02* +X15768675Y-14018641D01* +X15768675Y-14018641D02* +X15759151Y-14009117D01* +X15978199Y-14028164D02* +X16016294Y-14028164D01* +X16016294Y-14028164D02* +X16035342Y-14018641D01* +X16035342Y-14018641D02* +X16044865Y-14009117D01* +X16044865Y-14009117D02* +X16063913Y-13980545D01* +X16063913Y-13980545D02* +X16073437Y-13942450D01* +X16073437Y-13942450D02* +X16073437Y-13866260D01* +X16073437Y-13866260D02* +X16063913Y-13847212D01* +X16063913Y-13847212D02* +X16054389Y-13837688D01* +X16054389Y-13837688D02* +X16035342Y-13828164D01* +X16035342Y-13828164D02* +X15997246Y-13828164D01* +X15997246Y-13828164D02* +X15978199Y-13837688D01* +X15978199Y-13837688D02* +X15968675Y-13847212D01* +X15968675Y-13847212D02* +X15959151Y-13866260D01* +X15959151Y-13866260D02* +X15959151Y-13913879D01* +X15959151Y-13913879D02* +X15968675Y-13932926D01* +X15968675Y-13932926D02* +X15978199Y-13942450D01* +X15978199Y-13942450D02* +X15997246Y-13951974D01* +X15997246Y-13951974D02* +X16035342Y-13951974D01* +X16035342Y-13951974D02* +X16054389Y-13942450D01* +X16054389Y-13942450D02* +X16063913Y-13932926D01* +X16063913Y-13932926D02* +X16073437Y-13913879D01* +X16244865Y-13894831D02* +X16244865Y-14028164D01* +X16197246Y-13818641D02* +X16149627Y-13961498D01* +X16149627Y-13961498D02* +X16273437Y-13961498D01* +X16340103Y-13828164D02* +X16340103Y-13866260D01* +X16416294Y-13828164D02* +X16416294Y-13866260D01* +X16679151Y-14104355D02* +X16669627Y-14094831D01* +X16669627Y-14094831D02* +X16650580Y-14066260D01* +X16650580Y-14066260D02* +X16641056Y-14047212D01* +X16641056Y-14047212D02* +X16631532Y-14018641D01* +X16631532Y-14018641D02* +X16622008Y-13971022D01* +X16622008Y-13971022D02* +X16622008Y-13932926D01* +X16622008Y-13932926D02* +X16631532Y-13885307D01* +X16631532Y-13885307D02* +X16641056Y-13856736D01* +X16641056Y-13856736D02* +X16650580Y-13837688D01* +X16650580Y-13837688D02* +X16669627Y-13809117D01* +X16669627Y-13809117D02* +X16679151Y-13799593D01* +X16860104Y-14028164D02* +X16745818Y-14028164D01* +X16802961Y-14028164D02* +X16802961Y-13828164D01* +X16802961Y-13828164D02* +X16783913Y-13856736D01* +X16783913Y-13856736D02* +X16764865Y-13875784D01* +X16764865Y-13875784D02* +X16745818Y-13885307D01* +X16936294Y-13847212D02* +X16945818Y-13837688D01* +X16945818Y-13837688D02* +X16964865Y-13828164D01* +X16964865Y-13828164D02* +X17012485Y-13828164D01* +X17012485Y-13828164D02* +X17031532Y-13837688D01* +X17031532Y-13837688D02* +X17041056Y-13847212D01* +X17041056Y-13847212D02* +X17050580Y-13866260D01* +X17050580Y-13866260D02* +X17050580Y-13885307D01* +X17050580Y-13885307D02* +X17041056Y-13913879D01* +X17041056Y-13913879D02* +X16926770Y-14028164D01* +X16926770Y-14028164D02* +X17050580Y-14028164D01* +X17256294Y-14028164D02* +X17256294Y-13828164D01* +X17342008Y-14028164D02* +X17342008Y-13923403D01* +X17342008Y-13923403D02* +X17332485Y-13904355D01* +X17332485Y-13904355D02* +X17313437Y-13894831D01* +X17313437Y-13894831D02* +X17284865Y-13894831D01* +X17284865Y-13894831D02* +X17265818Y-13904355D01* +X17265818Y-13904355D02* +X17256294Y-13913879D01* +X17465818Y-14028164D02* +X17446770Y-14018641D01* +X17446770Y-14018641D02* +X17437246Y-14009117D01* +X17437246Y-14009117D02* +X17427723Y-13990069D01* +X17427723Y-13990069D02* +X17427723Y-13932926D01* +X17427723Y-13932926D02* +X17437246Y-13913879D01* +X17437246Y-13913879D02* +X17446770Y-13904355D01* +X17446770Y-13904355D02* +X17465818Y-13894831D01* +X17465818Y-13894831D02* +X17494389Y-13894831D01* +X17494389Y-13894831D02* +X17513437Y-13904355D01* +X17513437Y-13904355D02* +X17522961Y-13913879D01* +X17522961Y-13913879D02* +X17532485Y-13932926D01* +X17532485Y-13932926D02* +X17532485Y-13990069D01* +X17532485Y-13990069D02* +X17522961Y-14009117D01* +X17522961Y-14009117D02* +X17513437Y-14018641D01* +X17513437Y-14018641D02* +X17494389Y-14028164D01* +X17494389Y-14028164D02* +X17465818Y-14028164D01* +X17646770Y-14028164D02* +X17627723Y-14018641D01* +X17627723Y-14018641D02* +X17618199Y-13999593D01* +X17618199Y-13999593D02* +X17618199Y-13828164D01* +X17799151Y-14018641D02* +X17780104Y-14028164D01* +X17780104Y-14028164D02* +X17742008Y-14028164D01* +X17742008Y-14028164D02* +X17722961Y-14018641D01* +X17722961Y-14018641D02* +X17713437Y-13999593D01* +X17713437Y-13999593D02* +X17713437Y-13923403D01* +X17713437Y-13923403D02* +X17722961Y-13904355D01* +X17722961Y-13904355D02* +X17742008Y-13894831D01* +X17742008Y-13894831D02* +X17780104Y-13894831D01* +X17780104Y-13894831D02* +X17799151Y-13904355D01* +X17799151Y-13904355D02* +X17808675Y-13923403D01* +X17808675Y-13923403D02* +X17808675Y-13942450D01* +X17808675Y-13942450D02* +X17713437Y-13961498D01* +X17884866Y-14018641D02* +X17903913Y-14028164D01* +X17903913Y-14028164D02* +X17942008Y-14028164D01* +X17942008Y-14028164D02* +X17961056Y-14018641D01* +X17961056Y-14018641D02* +X17970580Y-13999593D01* +X17970580Y-13999593D02* +X17970580Y-13990069D01* +X17970580Y-13990069D02* +X17961056Y-13971022D01* +X17961056Y-13971022D02* +X17942008Y-13961498D01* +X17942008Y-13961498D02* +X17913437Y-13961498D01* +X17913437Y-13961498D02* +X17894389Y-13951974D01* +X17894389Y-13951974D02* +X17884866Y-13932926D01* +X17884866Y-13932926D02* +X17884866Y-13923403D01* +X17884866Y-13923403D02* +X17894389Y-13904355D01* +X17894389Y-13904355D02* +X17913437Y-13894831D01* +X17913437Y-13894831D02* +X17942008Y-13894831D01* +X17942008Y-13894831D02* +X17961056Y-13904355D01* +X18037247Y-14104355D02* +X18046770Y-14094831D01* +X18046770Y-14094831D02* +X18065818Y-14066260D01* +X18065818Y-14066260D02* +X18075342Y-14047212D01* +X18075342Y-14047212D02* +X18084866Y-14018641D01* +X18084866Y-14018641D02* +X18094389Y-13971022D01* +X18094389Y-13971022D02* +X18094389Y-13932926D01* +X18094389Y-13932926D02* +X18084866Y-13885307D01* +X18084866Y-13885307D02* +X18075342Y-13856736D01* +X18075342Y-13856736D02* +X18065818Y-13837688D01* +X18065818Y-13837688D02* +X18046770Y-13809117D01* +X18046770Y-13809117D02* +X18037247Y-13799593D01* +M02* diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-PTH-drl_map.svg b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-PTH-drl_map.svg new file mode 100755 index 0000000..92e8e8c --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-PTH-drl_map.svg @@ -0,0 +1,1180 @@ + + + +SVG Image created as StudioMic-PTH-drl_map.svg date 2023/03/18 07:42:17 + Image generated by PCBNEW + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +Drill Map: +Drill Map: + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +1.000mm / 0.0394" (12 holes) +1.000mm / 0.0394" (12 holes) + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-PTH.drl b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-PTH.drl new file mode 100755 index 0000000..e01b162 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/SVG/StudioMic-PTH.drl @@ -0,0 +1,28 @@ +M48 +; DRILL file {KiCad (7.0.0)} date Sat Mar 18 07:42:17 2023 +; FORMAT={-:-/ absolute / metric / decimal} +; #@! TF.CreationDate,2023-03-18T07:42:17+03:00 +; #@! TF.GenerationSoftware,Kicad,Pcbnew,(7.0.0) +; #@! TF.FileFunction,Plated,1,2,PTH +FMAT,2 +METRIC +; #@! TA.AperFunction,Plated,PTH,ViaDrill +T1C1.000 +% +G90 +G05 +T1 +X143.764Y-108.331 +X145.034Y-59.563 +X147.955Y-78.232 +X150.391Y-71.755 +X151.638Y-106.934 +X153.416Y-59.817 +X153.67Y-77.724 +X154.822Y-67.828 +X158.242Y-56.388 +X162.687Y-58.039 +X163.322Y-104.013 +X163.322Y-109.093 +T0 +M30 diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/StudioMic.kicad_pcb b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/StudioMic.kicad_pcb new file mode 100755 index 0000000..4d74951 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/StudioMic.kicad_pcb @@ -0,0 +1,6812 @@ +(kicad_pcb (version 20221018) (generator pcbnew) + + (general + (thickness 1.6) + ) + + (paper "A4") + (title_block + (title "High performance condenser microphone preamp with HV bias") + (date "2023-03-18") + (rev "1") + (company "spirit.re") + ) + + (layers + (0 "F.Cu" signal) + (31 "B.Cu" signal) + (32 "B.Adhes" user "B.Adhesive") + (33 "F.Adhes" user "F.Adhesive") + (34 "B.Paste" user) + (35 "F.Paste" user) + (36 "B.SilkS" user "B.Silkscreen") + (37 "F.SilkS" user "F.Silkscreen") + (38 "B.Mask" user) + (39 "F.Mask" user) + (40 "Dwgs.User" user "User.Drawings") + (41 "Cmts.User" user "User.Comments") + (42 "Eco1.User" user "User.Eco1") + (43 "Eco2.User" user "User.Eco2") + (44 "Edge.Cuts" user) + (45 "Margin" user) + (46 "B.CrtYd" user "B.Courtyard") + (47 "F.CrtYd" user "F.Courtyard") + (48 "B.Fab" user) + (49 "F.Fab" user) + (50 "User.1" user) + (51 "User.2" user) + (52 "User.3" user) + (53 "User.4" user) + (54 "User.5" user) + (55 "User.6" user) + (56 "User.7" user) + (57 "User.8" user) + (58 "User.9" user) + ) + + (setup + (stackup + (layer "F.SilkS" (type "Top Silk Screen")) + (layer "F.Paste" (type "Top Solder Paste")) + (layer "F.Mask" (type "Top Solder Mask") (thickness 0.01)) + (layer "F.Cu" (type "copper") (thickness 0.035)) + (layer "dielectric 1" (type "core") (thickness 1.51) (material "FR4") (epsilon_r 4.5) (loss_tangent 0.02)) + (layer "B.Cu" (type "copper") (thickness 0.035)) + (layer "B.Mask" (type "Bottom Solder Mask") (thickness 0.01)) + (layer "B.Paste" (type "Bottom Solder Paste")) + (layer "B.SilkS" (type "Bottom Silk Screen")) + (copper_finish "None") + (dielectric_constraints no) + ) + (pad_to_mask_clearance 0) + (pcbplotparams + (layerselection 0x00010fc_ffffffff) + (plot_on_all_layers_selection 0x0000000_00000000) + (disableapertmacros false) + (usegerberextensions false) + (usegerberattributes true) + (usegerberadvancedattributes true) + (creategerberjobfile true) + (dashed_line_dash_ratio 12.000000) + (dashed_line_gap_ratio 3.000000) + (svgprecision 4) + (plotframeref false) + (viasonmask false) + (mode 1) + (useauxorigin false) + (hpglpennumber 1) + (hpglpenspeed 20) + (hpglpendiameter 15.000000) + (dxfpolygonmode true) + (dxfimperialunits true) + (dxfusepcbnewfont true) + (psnegative false) + (psa4output false) + (plotreference true) + (plotvalue true) + (plotinvisibletext false) + (sketchpadsonfab false) + (subtractmaskfromsilk false) + (outputformat 1) + (mirror false) + (drillshape 0) + (scaleselection 1) + (outputdirectory "Gerbers") + ) + ) + + (net 0 "") + (net 1 "Net-(C1-Pad1)") + (net 2 "Net-(C1-Pad2)") + (net 3 "Net-(C2-Pad1)") + (net 4 "Net-(U1A--)") + (net 5 "+12V") + (net 6 "+6V") + (net 7 "GNDA") + (net 8 "Net-(C9-Pad2)") + (net 9 "Net-(C11-Pad1)") + (net 10 "Net-(D2-K)") + (net 11 "Net-(C12-Pad1)") + (net 12 "Net-(D3-K)") + (net 13 "Net-(C13-Pad1)") + (net 14 "Net-(D4-K)") + (net 15 "Net-(C14-Pad1)") + (net 16 "Net-(D5-K)") + (net 17 "Net-(C15-Pad1)") + (net 18 "Net-(D6-K)") + (net 19 "Net-(C16-Pad1)") + (net 20 "Net-(D7-K)") + (net 21 "Net-(C17-Pad2)") + (net 22 "HT") + (net 23 "Net-(D8-K)") + (net 24 "Net-(C92-Pad2)") + (net 25 "Net-(C91-Pad1)") + (net 26 "Net-(U1A-+)") + (net 27 "Net-(U1B--)") + (net 28 "Net-(R101-Pad2)") + (net 29 "Net-(R102-Pad2)") + (net 30 "Net-(R103-Pad2)") + (net 31 "Net-(R104-Pad2)") + (net 32 "Net-(R105-Pad2)") + (net 33 "Net-(R106-Pad2)") + (net 34 "Net-(R107-Pad2)") + (net 35 "Net-(R108-Pad2)") + (net 36 "Net-(R109-Pad2)") + (net 37 "GNDREF") + (net 38 "Net-(MK1-+)") + + (footprint "Capacitor_SMD:C_0805_2012Metric" (layer "F.Cu") + (tstamp 01b182a4-8f4d-44c6-b294-6ef0e29b98c3) + (at 162.2825 78.4034 -90) + (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") + (tags "capacitor") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Unpolarized capacitor, small symbol") + (property "ki_keywords" "capacitor cap") + (path "/097ef46b-62a2-4b2a-8be3-4c8a8bb9a9dc") + (attr smd) + (fp_text reference "C12" (at 5.1918 -0.6331 90) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 1a3977b2-8255-4137-930c-2b392a9911bd) + ) + (fp_text value "10nF" (at 0 1.68 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 2a62e7f1-1290-48c5-b92c-6d44c78f189a) + ) + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.08))) + (tstamp 2f1d9051-5999-4f6f-a87f-71ca6b0d3ac0) + ) + (fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp bb5e2d11-9f46-4785-ac44-60a4c0000322)) + (fp_line (start -0.261252 0.735) (end 0.261252 0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 50a7f7dc-2b9a-449d-a7e2-46dcdaadc2a1)) + (fp_line (start -1.7 -0.98) (end 1.7 -0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp c473e8f2-c89c-41a0-8d71-54e00ab7459a)) + (fp_line (start -1.7 0.98) (end -1.7 -0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 81e7ed8a-ff5b-4b16-bf95-b25de7b162fe)) + (fp_line (start 1.7 -0.98) (end 1.7 0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp aa3b038a-4f20-429c-9235-bbc7a2d0d525)) + (fp_line (start 1.7 0.98) (end -1.7 0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 57501beb-0573-495f-832e-9868b79c2e7c)) + (fp_line (start -1 -0.625) (end 1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 7a82359d-bffb-4158-9c17-5b5856420a9c)) + (fp_line (start -1 0.625) (end -1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 2b1193de-8096-4d23-a48b-11376bc13925)) + (fp_line (start 1 -0.625) (end 1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp daeaa59b-82a9-45b3-826f-ca6581edbf07)) + (fp_line (start 1 0.625) (end -1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 44085f73-7f80-4e89-8fbe-22bc84b56912)) + (pad "1" smd roundrect (at -0.95 0 270) (size 1 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 11 "Net-(C12-Pad1)") (pintype "passive") (tstamp ab6c3b30-61a8-4fe6-8155-0c84ac96c7c3)) + (pad "2" smd roundrect (at 0.95 0 270) (size 1 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 12 "Net-(D3-K)") (pintype "passive") (tstamp d2c57e68-b947-46ef-b517-4be26f452a2b)) + (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Capacitor_SMD:C_0805_2012Metric" (layer "F.Cu") + (tstamp 0af66eb1-9d75-44ce-8543-5dda05730eee) + (at 145.087 62.738 -90) + (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") + (tags "capacitor") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Unpolarized capacitor, small symbol") + (property "ki_keywords" "capacitor cap") + (path "/29890a30-e6b4-4bb8-bf91-b42a946a1b23") + (attr smd) + (fp_text reference "C8" (at 0 1.958) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 3975aa41-1236-4eef-83cd-d83fdc687247) + ) + (fp_text value "100nF 100V" (at 0 1.68 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp c70bb1ac-ed13-4a6c-a6b8-0ffc029a0e5d) + ) + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.08))) + (tstamp 146973b0-3a67-4086-8b8d-87cac76e4724) + ) + (fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp b7888dd7-0708-42da-af2a-e385eaf3b440)) + (fp_line (start -0.261252 0.735) (end 0.261252 0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 4ebffb32-d02e-469c-a663-84fc525bad92)) + (fp_line (start -1.7 -0.98) (end 1.7 -0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp b1329576-b498-422f-918f-fa3c0309290e)) + (fp_line (start -1.7 0.98) (end -1.7 -0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 495f27f9-56e0-4d76-b339-4536f7f78e10)) + (fp_line (start 1.7 -0.98) (end 1.7 0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp dd187d0f-e0bd-41d1-8591-53ef193e3aed)) + (fp_line (start 1.7 0.98) (end -1.7 0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 078ab4dc-6b4c-4d23-a804-ba4bf37ac464)) + (fp_line (start -1 -0.625) (end 1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp f4781aaf-329f-40d3-8eea-1b887651b452)) + (fp_line (start -1 0.625) (end -1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 6fad0ccd-85f1-4fb6-80ec-d3fe9da02d40)) + (fp_line (start 1 -0.625) (end 1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp cd63ff04-44c1-4c36-86df-f1eb46ca6ed0)) + (fp_line (start 1 0.625) (end -1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 0a3fc6b0-5f1e-4bfc-86e4-66f69f0ffb35)) + (pad "1" smd roundrect (at -0.95 0 270) (size 1 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 37 "GNDREF") (pintype "passive") (tstamp 204454a8-bf5d-4a77-951d-3a1686766ba5)) + (pad "2" smd roundrect (at 0.95 0 270) (size 1 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 7 "GNDA") (pintype "passive") (tstamp ec3414c9-162a-4dd2-ae1a-4f6f253019f1)) + (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "kibuzzard-6409565D" (layer "F.Cu") + (tstamp 11c75031-d946-4ac2-96c7-599aa3a5604c) + (at 140.314181 91.643002 -90) + (descr "Generated with KiBuzzard") + (tags "kb_params=eyJBbGlnbm1lbnRDaG9pY2UiOiAiQ2VudGVyIiwgIkNhcExlZnRDaG9pY2UiOiAiLyIsICJDYXBSaWdodENob2ljZSI6ICIvIiwgIkZvbnRDb21ib0JveCI6ICJGcmVkb2thT25lIiwgIkhlaWdodEN0cmwiOiAiMSIsICJMYXllckNvbWJvQm94IjogIkYuU2lsa1MiLCAiTXVsdGlMaW5lVGV4dCI6ICJDb25kZW5zZXIgbWljIHByZWFtcGxpZmVyIiwgIlBhZGRpbmdCb3R0b21DdHJsIjogIjUiLCAiUGFkZGluZ0xlZnRDdHJsIjogIjIiLCAiUGFkZGluZ1JpZ2h0Q3RybCI6ICIyIiwgIlBhZGRpbmdUb3BDdHJsIjogIjUiLCAiV2lkdGhDdHJsIjogIiJ9") + (attr board_only exclude_from_pos_files exclude_from_bom) + (fp_text reference "kibuzzard-6409565D" (at 0 -4.17486 90) (layer "F.SilkS") hide + (effects (font (size 0 0) (thickness 0.15))) + (tstamp 566ab7ee-53af-4f84-81b4-7621ee463869) + ) + (fp_text value "G***" (at 0 4.17486 90) (layer "F.SilkS") hide + (effects (font (size 0 0) (thickness 0.15))) + (tstamp aad21b5d-792f-41c7-9bfa-25988107add7) + ) + (fp_poly + (pts + (xy -5.860256 -0.037306) + (xy -5.799931 -0.088106) + (xy -5.827713 -0.146844) + (xy -5.907088 -0.169069) + (xy -6.009481 -0.127) + (xy -6.060281 -0.037306) + (xy -5.860256 -0.037306) + ) + + (stroke (width 0) (type solid)) (fill solid) (layer "F.SilkS") (tstamp d74a2cf7-c3ac-4698-b8a7-513060b0315d)) + (fp_poly + (pts + (xy -3.212306 -0.037306) + (xy -3.151981 -0.088106) + (xy -3.179763 -0.146844) + (xy -3.259138 -0.169069) + (xy -3.361531 -0.127) + (xy -3.412331 -0.037306) + (xy -3.212306 -0.037306) + ) + + (stroke (width 0) (type solid)) (fill solid) (layer "F.SilkS") (tstamp 67ba54e7-9050-413c-80ec-54f9a34d9d6d)) + (fp_poly + (pts + (xy 3.452019 -0.037306) + (xy 3.512344 -0.088106) + (xy 3.484562 -0.146844) + (xy 3.405187 -0.169069) + (xy 3.302794 -0.127) + (xy 3.251994 -0.037306) + (xy 3.452019 -0.037306) + ) + + (stroke (width 0) (type solid)) (fill solid) (layer "F.SilkS") (tstamp be636f4c-cdf7-4461-9b2d-0cf9317f78f3)) + (fp_poly + (pts + (xy 9.220994 -0.037306) + (xy 9.281319 -0.088106) + (xy 9.253537 -0.146844) + (xy 9.174163 -0.169069) + (xy 9.071769 -0.127) + (xy 9.020969 -0.037306) + (xy 9.220994 -0.037306) + ) + + (stroke (width 0) (type solid)) (fill solid) (layer "F.SilkS") (tstamp d5ac962e-eabf-4a3d-a69d-5cc9f5d88755)) + (fp_poly + (pts + (xy -6.977856 0.111919) + (xy -6.877844 0.154781) + (xy -6.780213 0.111919) + (xy -6.741319 0.017462) + (xy -6.778625 -0.078581) + (xy -6.879431 -0.123031) + (xy -6.981031 -0.079375) + (xy -7.019131 0.016669) + (xy -6.977856 0.111919) + ) + + (stroke (width 0) (type solid)) (fill solid) (layer "F.SilkS") (tstamp 65f7b034-649b-4b72-ab1f-7a5d4f1fbb9f)) + (fp_poly + (pts + (xy 1.645444 -0.086519) + (xy 1.608931 0.007144) + (xy 1.646237 0.100013) + (xy 1.741487 0.142081) + (xy 1.839912 0.100806) + (xy 1.880394 0.007144) + (xy 1.842294 -0.087313) + (xy 1.743075 -0.129381) + (xy 1.645444 -0.086519) + ) + + (stroke (width 0) (type solid)) (fill solid) (layer "F.SilkS") (tstamp 35350784-5ad6-47c4-ae2b-dcbcaef4d000)) + (fp_poly + (pts + (xy 4.144169 0.016669) + (xy 4.185444 0.111125) + (xy 4.285456 0.153194) + (xy 4.383087 0.110331) + (xy 4.421981 0.015875) + (xy 4.384675 -0.080169) + (xy 4.284662 -0.124619) + (xy 4.183062 -0.080169) + (xy 4.144169 0.016669) + ) + + (stroke (width 0) (type solid)) (fill solid) (layer "F.SilkS") (tstamp 84639d07-e858-4dad-b848-116b06df02d0)) + (fp_poly + (pts + (xy 6.501606 -0.086519) + (xy 6.465094 0.007144) + (xy 6.5024 0.100013) + (xy 6.59765 0.142081) + (xy 6.696075 0.100806) + (xy 6.736556 0.007144) + (xy 6.698456 -0.087313) + (xy 6.599237 -0.129381) + (xy 6.501606 -0.086519) + ) + + (stroke (width 0) (type solid)) (fill solid) (layer "F.SilkS") (tstamp 5610f263-a7c5-478f-b756-973a022f67f4)) + (fp_poly + (pts + (xy -8.887619 0.130175) + (xy -8.784431 0.169069) + (xy -8.679656 0.129381) + (xy -8.640366 0.080169) + (xy -8.627269 0.011906) + (xy -8.639572 -0.055959) + (xy -8.676481 -0.103981) + (xy -8.782844 -0.142081) + (xy -8.889206 -0.102394) + (xy -8.926116 -0.05338) + (xy -8.938419 0.014288) + (xy -8.925719 0.081756) + (xy -8.887619 0.130175) + ) + + (stroke (width 0) (type solid)) (fill solid) (layer "F.SilkS") (tstamp 27222676-26c0-4e4c-98e9-f53e67423f9a)) + (fp_poly + (pts + (xy -10.297319 -1.12686) + (xy -10.42961 -1.12686) + (xy -11.105727 1.12686) + (xy -10.42961 1.12686) + (xy -10.297319 1.12686) + (xy -9.6901 1.12686) + (xy -9.6901 0.450056) + (xy -9.765903 0.445095) + (xy -9.8425 0.430213) + (xy -9.920684 0.403622) + (xy -10.00125 0.363537) + (xy -10.078839 0.311547) + (xy -10.148094 0.249238) + (xy -10.207427 0.172244) + (xy -10.25525 0.0762) + (xy -10.286802 -0.033933) + (xy -10.297319 -0.153194) + (xy -10.287 -0.271264) + (xy -10.256044 -0.377825) + (xy -10.209014 -0.4699) + (xy -10.150475 -0.544513) + (xy -10.081617 -0.605036) + (xy -10.003631 -0.654844) + (xy -9.899738 -0.702469) + (xy -9.795492 -0.731044) + (xy -9.690894 -0.740569) + (xy -9.615686 -0.734814) + (xy -9.539288 -0.71755) + (xy -9.422606 -0.670719) + (xy -9.384506 -0.648494) + (xy -9.340056 -0.619919) + (xy -9.298781 -0.544513) + (xy -9.332119 -0.456406) + (xy -9.390856 -0.392113) + (xy -9.443244 -0.370681) + (xy -9.524206 -0.405606) + (xy -9.601994 -0.446087) + (xy -9.702006 -0.459581) + (xy -9.8044 -0.441722) + (xy -9.905206 -0.388144) + (xy -9.984581 -0.289719) + (xy -10.008394 -0.222052) + (xy -10.016331 -0.14605) + (xy -10.008394 -0.070048) + (xy -9.984581 -0.002381) + (xy -9.903619 0.097631) + (xy -9.804797 0.150019) + (xy -9.702006 0.167481) + (xy -9.609138 0.154781) + (xy -9.546431 0.129381) + (xy -9.517856 0.108744) + (xy -9.441656 0.076994) + (xy -9.390459 0.099219) + (xy -9.335294 0.165894) + (xy -9.300369 0.254794) + (xy -9.3218 0.310356) + (xy -9.371806 0.350044) + (xy -9.426575 0.383381) + (xy -9.533731 0.424656) + (xy -9.613305 0.443706) + (xy -9.6901 0.450056) + (xy -9.6901 1.12686) + (xy -8.782844 1.12686) + (xy -8.782844 0.448469) + (xy -8.886031 0.43557) + (xy -8.986044 0.396875) + (xy -9.07673 0.332978) + (xy -9.151938 0.244475) + (xy -9.202539 0.13712) + (xy -9.219406 0.016669) + (xy -9.20459 -0.102923) + (xy -9.16014 -0.207698) + (xy -9.086056 -0.297656) + (xy -8.992923 -0.366448) + (xy -8.891323 -0.407723) + (xy -8.781256 -0.421481) + (xy -8.671366 -0.407811) + (xy -8.570295 -0.366801) + (xy -8.478044 -0.29845) + (xy -8.404842 -0.208933) + (xy -8.360922 -0.104422) + (xy -8.346281 0.015081) + (xy -8.363347 0.139502) + (xy -8.414544 0.249238) + (xy -8.490148 0.338138) + (xy -8.580438 0.40005) + (xy -8.679855 0.436364) + (xy -8.782844 0.448469) + (xy -8.782844 1.12686) + (xy -7.547769 1.12686) + (xy -7.547769 0.432594) + (xy -7.636669 0.417909) + (xy -7.677944 0.373856) + (xy -7.687469 0.292894) + (xy -7.687469 0.013494) + (xy -7.724775 -0.088106) + (xy -7.824788 -0.124619) + (xy -7.926388 -0.086519) + (xy -7.965281 0.013494) + (xy -7.965281 0.294481) + (xy -7.967663 0.34925) + (xy -7.982744 0.389731) + (xy -8.023622 0.421878) + (xy -8.104981 0.432594) + (xy -8.185547 0.421878) + (xy -8.227219 0.389731) + (xy -8.240713 0.347663) + (xy -8.243094 0.292894) + (xy -8.243094 -0.269081) + (xy -8.240713 -0.322263) + (xy -8.225631 -0.362744) + (xy -8.183959 -0.392509) + (xy -8.103394 -0.402431) + (xy -8.025209 -0.393303) + (xy -7.984331 -0.365919) + (xy -7.968456 -0.300831) + (xy -7.939881 -0.332581) + (xy -7.897019 -0.365919) + (xy -7.777956 -0.402431) + (xy -7.678032 -0.388937) + (xy -7.589926 -0.348456) + (xy -7.513638 -0.280987) + (xy -7.454988 -0.194116) + (xy -7.419799 -0.095426) + (xy -7.408069 0.015081) + (xy -7.408069 0.294481) + (xy -7.41045 0.34925) + (xy -7.423944 0.389731) + (xy -7.466013 0.421878) + (xy -7.547769 0.432594) + (xy -7.547769 1.12686) + (xy -6.61035 1.12686) + (xy -6.61035 0.432594) + (xy -6.696273 0.413147) + (xy -6.733381 0.354806) + (xy -6.813153 0.411956) + (xy -6.919119 0.431006) + (xy -7.011547 0.41716) + (xy -7.09833 0.37562) + (xy -7.179469 0.306388) + (xy -7.244733 0.218722) + (xy -7.283891 0.121885) + (xy -7.296944 0.015875) + (xy -7.283803 -0.090223) + (xy -7.24438 -0.187325) + (xy -7.178675 -0.275431) + (xy -7.097272 -0.345105) + (xy -7.010753 -0.386909) + (xy -6.919119 -0.400844) + (xy -6.814741 -0.381) + (xy -6.736556 -0.321469) + (xy -6.736556 -0.654844) + (xy -6.734175 -0.709613) + (xy -6.719888 -0.750888) + (xy -6.677819 -0.783431) + (xy -6.59765 -0.792956) + (xy -6.517481 -0.783431) + (xy -6.475413 -0.750094) + (xy -6.461125 -0.708025) + (xy -6.458744 -0.653256) + (xy -6.458744 0.294481) + (xy -6.461125 0.34925) + (xy -6.476206 0.389731) + (xy -6.521648 0.421878) + (xy -6.61035 0.432594) + (xy -6.61035 1.12686) + (xy -5.904706 1.12686) + (xy -5.904706 0.454819) + (xy -6.015633 0.444698) + (xy -6.113463 0.414337) + (xy -6.194623 0.367308) + (xy -6.255544 0.307181) + (xy -6.311106 0.218105) + (xy -6.344444 0.122326) + (xy -6.355556 0.019844) + (xy -6.341181 -0.104599) + (xy -6.298053 -0.211226) + (xy -6.226175 -0.300037) + (xy -6.132777 -0.366624) + (xy -6.025092 -0.406576) + (xy -5.903119 -0.419894) + (xy -5.80013 -0.41017) + (xy -5.711825 -0.381) + (xy -5.638205 -0.332383) + (xy -5.579269 -0.264319) + (xy -5.538788 -0.177998) + (xy -5.525294 -0.084137) + (xy -5.537398 0.000794) + (xy -5.573713 0.060325) + (xy -5.680869 0.107156) + (xy -6.057106 0.107156) + (xy -6.004719 0.181769) + (xy -5.899944 0.211931) + (xy -5.817791 0.207169) + (xy -5.755481 0.192881) + (xy -5.738019 0.186531) + (xy -5.674519 0.169069) + (xy -5.587206 0.240506) + (xy -5.566569 0.313531) + (xy -5.587702 0.375345) + (xy -5.651103 0.419497) + (xy -5.756771 0.445988) + (xy -5.904706 0.454819) + (xy -5.904706 1.12686) + (xy -4.726781 1.12686) + (xy -4.726781 0.432594) + (xy -4.815681 0.417909) + (xy -4.856956 0.373856) + (xy -4.866481 0.292894) + (xy -4.866481 0.013494) + (xy -4.903788 -0.088106) + (xy -5.0038 -0.124619) + (xy -5.1054 -0.086519) + (xy -5.144294 0.013494) + (xy -5.144294 0.294481) + (xy -5.146675 0.34925) + (xy -5.161756 0.389731) + (xy -5.202634 0.421878) + (xy -5.283994 0.432594) + (xy -5.364559 0.421878) + (xy -5.406231 0.389731) + (xy -5.419725 0.347663) + (xy -5.422106 0.292894) + (xy -5.422106 -0.269081) + (xy -5.419725 -0.322263) + (xy -5.404644 -0.362744) + (xy -5.362972 -0.392509) + (xy -5.282406 -0.402431) + (xy -5.204222 -0.393303) + (xy -5.163344 -0.365919) + (xy -5.147469 -0.300831) + (xy -5.118894 -0.332581) + (xy -5.076031 -0.365919) + (xy -4.956969 -0.402431) + (xy -4.857044 -0.388937) + (xy -4.768938 -0.348456) + (xy -4.69265 -0.280987) + (xy -4.634001 -0.194116) + (xy -4.598811 -0.095426) + (xy -4.587081 0.015081) + (xy -4.587081 0.294481) + (xy -4.589463 0.34925) + (xy -4.602956 0.389731) + (xy -4.645025 0.421878) + (xy -4.726781 0.432594) + (xy -4.726781 1.12686) + (xy -4.15925 1.12686) + (xy -4.15925 0.448469) + (xy -4.260056 0.438591) + (xy -4.358217 0.408958) + (xy -4.453731 0.359569) + (xy -4.483894 0.299244) + (xy -4.468813 0.247253) + (xy -4.423569 0.173831) + (xy -4.367213 0.146844) + (xy -4.261644 0.185738) + (xy -4.140994 0.224631) + (xy -4.068366 0.215106) + (xy -4.044156 0.186531) + (xy -4.070747 0.160337) + (xy -4.150519 0.142081) + (xy -4.250134 0.116284) + (xy -4.348956 0.067469) + (xy -4.425156 -0.022225) + (xy -4.447778 -0.089098) + (xy -4.455319 -0.167481) + (xy -4.441539 -0.257778) + (xy -4.400201 -0.328009) + (xy -4.331303 -0.378174) + (xy -4.234847 -0.408273) + (xy -4.110831 -0.418306) + (xy -3.996531 -0.404813) + (xy -3.879056 -0.364331) + (xy -3.823494 -0.300831) + (xy -3.858419 -0.207169) + (xy -3.929856 -0.151606) + (xy -4.0005 -0.175419) + (xy -4.112419 -0.199231) + (xy -4.206081 -0.164306) + (xy -4.179094 -0.125016) + (xy -4.098131 -0.102394) + (xy -3.994944 -0.081756) + (xy -3.894931 -0.042069) + (xy -3.817938 0.034925) + (xy -3.79472 0.096639) + (xy -3.786981 0.172244) + (xy -3.79472 0.248642) + (xy -3.817938 0.312738) + (xy -3.904456 0.399256) + (xy -3.977922 0.426597) + (xy -4.062853 0.443001) + (xy -4.15925 0.448469) + (xy -4.15925 1.12686) + (xy -3.256756 1.12686) + (xy -3.256756 0.454819) + (xy -3.367683 0.444698) + (xy -3.465513 0.414337) + (xy -3.546673 0.367308) + (xy -3.607594 0.307181) + (xy -3.663156 0.218105) + (xy -3.696494 0.122326) + (xy -3.707606 0.019844) + (xy -3.693231 -0.104599) + (xy -3.650103 -0.211226) + (xy -3.578225 -0.300037) + (xy -3.484827 -0.366624) + (xy -3.377142 -0.406576) + (xy -3.255169 -0.419894) + (xy -3.15218 -0.41017) + (xy -3.063875 -0.381) + (xy -2.990255 -0.332383) + (xy -2.931319 -0.264319) + (xy -2.890838 -0.177998) + (xy -2.877344 -0.084137) + (xy -2.889448 0.000794) + (xy -2.925763 0.060325) + (xy -3.032919 0.107156) + (xy -3.409156 0.107156) + (xy -3.356769 0.181769) + (xy -3.251994 0.211931) + (xy -3.169841 0.207169) + (xy -3.107531 0.192881) + (xy -3.090069 0.186531) + (xy -3.026569 0.169069) + (xy -2.939256 0.240506) + (xy -2.918619 0.313531) + (xy -2.939752 0.375345) + (xy -3.003153 0.419497) + (xy -3.108821 0.445988) + (xy -3.256756 0.454819) + (xy -3.256756 1.12686) + (xy -2.636044 1.12686) + (xy -2.636044 0.434181) + (xy -2.745581 0.407194) + (xy -2.774156 0.338931) + (xy -2.774156 0.292894) + (xy -2.774156 -0.264319) + (xy -2.771775 -0.319087) + (xy -2.758281 -0.359569) + (xy -2.716213 -0.391716) + (xy -2.634456 -0.402431) + (xy -2.557066 -0.393303) + (xy -2.515394 -0.365919) + (xy -2.497931 -0.313531) + (xy -2.474913 -0.340519) + (xy -2.410619 -0.383381) + (xy -2.3241 -0.410369) + (xy -2.261394 -0.4064) + (xy -2.205831 -0.392906) + (xy -2.155825 -0.360363) + (xy -2.135981 -0.286544) + (xy -2.166144 -0.175419) + (xy -2.253456 -0.115094) + (xy -2.308225 -0.127794) + (xy -2.377281 -0.140494) + (xy -2.45745 -0.110331) + (xy -2.494756 -0.037306) + (xy -2.494756 0.296069) + (xy -2.497138 0.350837) + (xy -2.512219 0.392906) + (xy -2.555081 0.423863) + (xy -2.636044 0.434181) + (xy -2.636044 1.12686) + (xy -0.562769 1.12686) + (xy -0.562769 0.434181) + (xy -0.643334 0.423069) + (xy -0.685006 0.389731) + (xy -0.6985 0.347663) + (xy -0.700881 0.292894) + (xy -0.700881 0.015081) + (xy -0.725488 -0.088503) + (xy -0.799306 -0.123031) + (xy -0.874713 -0.086519) + (xy -0.894556 0.016669) + (xy -0.894556 0.294481) + (xy -0.896938 0.350044) + (xy -0.912019 0.391319) + (xy -0.954088 0.423466) + (xy -1.035844 0.434181) + (xy -1.116409 0.423069) + (xy -1.158081 0.389731) + (xy -1.171575 0.347663) + (xy -1.173956 0.292894) + (xy -1.173956 0.015081) + (xy -1.198563 -0.088503) + (xy -1.272381 -0.123031) + (xy -1.343819 -0.088503) + (xy -1.367631 0.015081) + (xy -1.367631 0.296069) + (xy -1.370013 0.350837) + (xy -1.385094 0.392906) + (xy -1.427956 0.423863) + (xy -1.508919 0.434181) + (xy -1.589484 0.423466) + (xy -1.631156 0.391319) + (xy -1.64465 0.350044) + (xy -1.647031 0.294481) + (xy -1.647031 -0.264319) + (xy -1.64465 -0.319087) + (xy -1.629569 -0.359569) + (xy -1.589484 -0.391716) + (xy -1.516856 -0.402431) + (xy -1.400969 -0.373856) + (xy -1.373981 -0.291306) + (xy -1.291828 -0.375841) + (xy -1.194594 -0.404019) + (xy -1.095816 -0.388673) + (xy -1.015383 -0.342635) + (xy -0.953294 -0.265906) + (xy -0.911225 -0.315913) + (xy -0.832644 -0.373063) + (xy -0.721519 -0.404019) + (xy -0.604838 -0.379611) + (xy -0.508794 -0.306388) + (xy -0.461169 -0.227101) + (xy -0.432594 -0.119415) + (xy -0.423069 0.016669) + (xy -0.423069 0.294481) + (xy -0.42545 0.34925) + (xy -0.440531 0.391319) + (xy -0.481409 0.423466) + (xy -0.562769 0.434181) + (xy -0.562769 1.12686) + (xy -0.157956 1.12686) + (xy -0.157956 0.434181) + (xy -0.238522 0.423466) + (xy -0.280194 0.391319) + (xy -0.293688 0.350044) + (xy -0.296069 0.294481) + (xy -0.296069 -0.262731) + (xy -0.293688 -0.3175) + (xy -0.280194 -0.359569) + (xy -0.238125 -0.390525) + (xy -0.157163 -0.400744) + (xy -0.157163 -0.515144) + (xy -0.237331 -0.524669) + (xy -0.2794 -0.558006) + (xy -0.293688 -0.600075) + (xy -0.296069 -0.654844) + (xy -0.293688 -0.709613) + (xy -0.280194 -0.750094) + (xy -0.238125 -0.782241) + (xy -0.156369 -0.792956) + (xy -0.0762 -0.782241) + (xy -0.035719 -0.750094) + (xy -0.020638 -0.708025) + (xy -0.018256 -0.653256) + (xy -0.020638 -0.598488) + (xy -0.034925 -0.557213) + (xy -0.076994 -0.524669) + (xy -0.157163 -0.515144) + (xy -0.157163 -0.400744) + (xy -0.156369 -0.400844) + (xy -0.048419 -0.373856) + (xy -0.019844 -0.305594) + (xy -0.018256 -0.259556) + (xy -0.018256 0.296069) + (xy -0.020638 0.350837) + (xy -0.035719 0.392906) + (xy -0.076597 0.423863) + (xy -0.157956 0.434181) + (xy -0.157956 1.12686) + (xy 0.516731 1.12686) + (xy 0.516731 0.442119) + (xy 0.419541 0.430301) + (xy 0.32482 0.394847) + (xy 0.232569 0.335756) + (xy 0.173434 0.276423) + (xy 0.126206 0.200025) + (xy 0.09525 0.110728) + (xy 0.084931 0.0127) + (xy 0.09525 -0.084931) + (xy 0.126206 -0.173037) + (xy 0.173434 -0.248245) + (xy 0.232569 -0.307181) + (xy 0.322351 -0.36539) + (xy 0.416013 -0.400315) + (xy 0.513556 -0.411956) + (xy 0.631031 -0.395288) + (xy 0.715169 -0.362744) + (xy 0.740569 -0.346869) + (xy 0.785019 -0.316706) + (xy 0.826294 -0.244475) + (xy 0.792956 -0.153194) + (xy 0.736997 -0.087709) + (xy 0.683419 -0.065881) + (xy 0.597694 -0.100806) + (xy 0.515937 -0.127794) + (xy 0.416719 -0.089694) + (xy 0.370681 0.015875) + (xy 0.415131 0.12065) + (xy 0.509587 0.157956) + (xy 0.60325 0.128587) + (xy 0.673894 0.099219) + (xy 0.726678 0.120253) + (xy 0.789781 0.183356) + (xy 0.826294 0.265906) + (xy 0.804466 0.324247) + (xy 0.738981 0.378619) + (xy 0.638175 0.426244) + (xy 0.516731 0.442119) + (xy 0.516731 1.12686) + (xy 1.467644 1.12686) + (xy 1.467644 0.796131) + (xy 1.389062 0.786606) + (xy 1.347787 0.754856) + (xy 1.3335 0.715169) + (xy 1.331119 0.661194) + (xy 1.331119 -0.265906) + (xy 1.3335 -0.319881) + (xy 1.346994 -0.359569) + (xy 1.384697 -0.391716) + (xy 1.453356 -0.402431) + (xy 1.566862 -0.381) + (xy 1.600994 -0.318294) + (xy 1.678583 -0.380206) + (xy 1.7907 -0.400844) + (xy 1.875455 -0.387262) + (xy 1.957211 -0.346516) + (xy 2.035969 -0.278606) + (xy 2.100351 -0.192705) + (xy 2.13898 -0.097984) + (xy 2.151856 0.005556) + (xy 2.139068 0.109097) + (xy 2.100703 0.203817) + (xy 2.036762 0.289719) + (xy 1.958358 0.357628) + (xy 1.876601 0.398374) + (xy 1.791494 0.411956) + (xy 1.679178 0.3937) + (xy 1.602581 0.338931) + (xy 1.602581 0.659606) + (xy 1.6002 0.713581) + (xy 1.585912 0.754063) + (xy 1.545431 0.786606) + (xy 1.467644 0.796131) + (xy 1.467644 1.12686) + (xy 2.393156 1.12686) + (xy 2.393156 0.434181) + (xy 2.283619 0.407194) + (xy 2.255044 0.338931) + (xy 2.255044 0.292894) + (xy 2.255044 -0.264319) + (xy 2.257425 -0.319087) + (xy 2.270919 -0.359569) + (xy 2.312987 -0.391716) + (xy 2.394744 -0.402431) + (xy 2.472134 -0.393303) + (xy 2.513806 -0.365919) + (xy 2.531269 -0.313531) + (xy 2.554287 -0.340519) + (xy 2.618581 -0.383381) + (xy 2.7051 -0.410369) + (xy 2.767806 -0.4064) + (xy 2.823369 -0.392906) + (xy 2.873375 -0.360363) + (xy 2.893219 -0.286544) + (xy 2.863056 -0.175419) + (xy 2.775744 -0.115094) + (xy 2.720975 -0.127794) + (xy 2.651919 -0.140494) + (xy 2.57175 -0.110331) + (xy 2.534444 -0.037306) + (xy 2.534444 0.296069) + (xy 2.532062 0.350837) + (xy 2.516981 0.392906) + (xy 2.474119 0.423863) + (xy 2.393156 0.434181) + (xy 2.393156 1.12686) + (xy 3.407569 1.12686) + (xy 3.407569 0.454819) + (xy 3.296642 0.444698) + (xy 3.198812 0.414337) + (xy 3.117652 0.367308) + (xy 3.056731 0.307181) + (xy 3.001169 0.218105) + (xy 2.967831 0.122326) + (xy 2.956719 0.019844) + (xy 2.971094 -0.104599) + (xy 3.014222 -0.211226) + (xy 3.0861 -0.300037) + (xy 3.179498 -0.366624) + (xy 3.287183 -0.406576) + (xy 3.409156 -0.419894) + (xy 3.512145 -0.41017) + (xy 3.60045 -0.381) + (xy 3.67407 -0.332383) + (xy 3.733006 -0.264319) + (xy 3.773487 -0.177998) + (xy 3.786981 -0.084137) + (xy 3.774877 0.000794) + (xy 3.738562 0.060325) + (xy 3.631406 0.107156) + (xy 3.255169 0.107156) + (xy 3.307556 0.181769) + (xy 3.412331 0.211931) + (xy 3.494484 0.207169) + (xy 3.556794 0.192881) + (xy 3.574256 0.186531) + (xy 3.637756 0.169069) + (xy 3.725069 0.240506) + (xy 3.745706 0.313531) + (xy 3.724573 0.375345) + (xy 3.661172 0.419497) + (xy 3.555504 0.445988) + (xy 3.407569 0.454819) + (xy 3.407569 1.12686) + (xy 4.5847 1.12686) + (xy 4.5847 0.431006) + (xy 4.468812 0.409575) + (xy 4.434681 0.346869) + (xy 4.356298 0.409972) + (xy 4.238625 0.431006) + (xy 4.149284 0.417072) + (xy 4.064353 0.375267) + (xy 3.983831 0.305594) + (xy 3.918567 0.217488) + (xy 3.879409 0.120385) + (xy 3.866356 0.014288) + (xy 3.879497 -0.091722) + (xy 3.91892 -0.18856) + (xy 3.984625 -0.276225) + (xy 4.066028 -0.345458) + (xy 4.152547 -0.386997) + (xy 4.244181 -0.400844) + (xy 4.342606 -0.381794) + (xy 4.404519 -0.346075) + (xy 4.433094 -0.313531) + (xy 4.469209 -0.380206) + (xy 4.558506 -0.402431) + (xy 4.650581 -0.392906) + (xy 4.69265 -0.359569) + (xy 4.706937 -0.3175) + (xy 4.709319 -0.262731) + (xy 4.709319 0.292894) + (xy 4.706937 0.347663) + (xy 4.693444 0.389731) + (xy 4.655145 0.420688) + (xy 4.5847 0.431006) + (xy 4.5847 1.12686) + (xy 5.920581 1.12686) + (xy 5.920581 0.434181) + (xy 5.840016 0.423069) + (xy 5.798344 0.389731) + (xy 5.78485 0.347663) + (xy 5.782469 0.292894) + (xy 5.782469 0.015081) + (xy 5.757862 -0.088503) + (xy 5.684044 -0.123031) + (xy 5.608637 -0.086519) + (xy 5.588794 0.016669) + (xy 5.588794 0.294481) + (xy 5.586412 0.350044) + (xy 5.571331 0.391319) + (xy 5.529262 0.423466) + (xy 5.447506 0.434181) + (xy 5.366941 0.423069) + (xy 5.325269 0.389731) + (xy 5.311775 0.347663) + (xy 5.309394 0.292894) + (xy 5.309394 0.015081) + (xy 5.284787 -0.088503) + (xy 5.210969 -0.123031) + (xy 5.139531 -0.088503) + (xy 5.115719 0.015081) + (xy 5.115719 0.296069) + (xy 5.113337 0.350837) + (xy 5.098256 0.392906) + (xy 5.055394 0.423863) + (xy 4.974431 0.434181) + (xy 4.893866 0.423466) + (xy 4.852194 0.391319) + (xy 4.8387 0.350044) + (xy 4.836319 0.294481) + (xy 4.836319 -0.264319) + (xy 4.8387 -0.319087) + (xy 4.853781 -0.359569) + (xy 4.893866 -0.391716) + (xy 4.966494 -0.402431) + (xy 5.082381 -0.373856) + (xy 5.109369 -0.291306) + (xy 5.191522 -0.375841) + (xy 5.288756 -0.404019) + (xy 5.387534 -0.388673) + (xy 5.467967 -0.342635) + (xy 5.530056 -0.265906) + (xy 5.572125 -0.315913) + (xy 5.650706 -0.373063) + (xy 5.761831 -0.404019) + (xy 5.878512 -0.379611) + (xy 5.974556 -0.306388) + (xy 6.022181 -0.227101) + (xy 6.050756 -0.119415) + (xy 6.060281 0.016669) + (xy 6.060281 0.294481) + (xy 6.0579 0.34925) + (xy 6.042819 0.391319) + (xy 6.001941 0.423466) + (xy 5.920581 0.434181) + (xy 5.920581 1.12686) + (xy 6.323806 1.12686) + (xy 6.323806 0.796131) + (xy 6.245225 0.786606) + (xy 6.20395 0.754856) + (xy 6.189662 0.715169) + (xy 6.187281 0.661194) + (xy 6.187281 -0.265906) + (xy 6.189662 -0.319881) + (xy 6.203156 -0.359569) + (xy 6.240859 -0.391716) + (xy 6.309519 -0.402431) + (xy 6.423025 -0.381) + (xy 6.457156 -0.318294) + (xy 6.534745 -0.380206) + (xy 6.646862 -0.400844) + (xy 6.731617 -0.387262) + (xy 6.813374 -0.346516) + (xy 6.892131 -0.278606) + (xy 6.956513 -0.192705) + (xy 6.995142 -0.097984) + (xy 7.008019 0.005556) + (xy 6.995231 0.109097) + (xy 6.956866 0.203817) + (xy 6.892925 0.289719) + (xy 6.81452 0.357628) + (xy 6.732764 0.398374) + (xy 6.647656 0.411956) + (xy 6.535341 0.3937) + (xy 6.458744 0.338931) + (xy 6.458744 0.659606) + (xy 6.456362 0.713581) + (xy 6.442075 0.754063) + (xy 6.401594 0.786606) + (xy 6.323806 0.796131) + (xy 6.323806 1.12686) + (xy 7.441406 1.12686) + (xy 7.441406 0.434975) + (xy 7.314406 0.427831) + (xy 7.2136 0.399653) + (xy 7.155656 0.346869) + (xy 7.122319 0.246062) + (xy 7.111206 0.099219) + (xy 7.111206 -0.656431) + (xy 7.113587 -0.7112) + (xy 7.127081 -0.753269) + (xy 7.16915 -0.785416) + (xy 7.250906 -0.796131) + (xy 7.329488 -0.785416) + (xy 7.371556 -0.753269) + (xy 7.386638 -0.710406) + (xy 7.389019 -0.654844) + (xy 7.389019 0.080169) + (xy 7.398544 0.1524) + (xy 7.440612 0.167481) + (xy 7.484269 0.169863) + (xy 7.511256 0.183356) + (xy 7.543006 0.296069) + (xy 7.535069 0.376634) + (xy 7.511256 0.418306) + (xy 7.441406 0.434975) + (xy 7.441406 1.12686) + (xy 7.768431 1.12686) + (xy 7.768431 0.434181) + (xy 7.687866 0.423466) + (xy 7.646194 0.391319) + (xy 7.6327 0.350044) + (xy 7.630319 0.294481) + (xy 7.630319 -0.262731) + (xy 7.6327 -0.3175) + (xy 7.646194 -0.359569) + (xy 7.688263 -0.390525) + (xy 7.769225 -0.400744) + (xy 7.769225 -0.515144) + (xy 7.689056 -0.524669) + (xy 7.646987 -0.558006) + (xy 7.6327 -0.600075) + (xy 7.630319 -0.654844) + (xy 7.6327 -0.709613) + (xy 7.646194 -0.750094) + (xy 7.688263 -0.782241) + (xy 7.770019 -0.792956) + (xy 7.850187 -0.782241) + (xy 7.890669 -0.750094) + (xy 7.90575 -0.708025) + (xy 7.908131 -0.653256) + (xy 7.90575 -0.598488) + (xy 7.891463 -0.557213) + (xy 7.849394 -0.524669) + (xy 7.769225 -0.515144) + (xy 7.769225 -0.400744) + (xy 7.770019 -0.400844) + (xy 7.877969 -0.373856) + (xy 7.906544 -0.305594) + (xy 7.908131 -0.259556) + (xy 7.908131 0.296069) + (xy 7.90575 0.350837) + (xy 7.890669 0.392906) + (xy 7.849791 0.423863) + (xy 7.768431 0.434181) + (xy 7.768431 1.12686) + (xy 8.279606 1.12686) + (xy 8.279606 0.435769) + (xy 8.201025 0.42545) + (xy 8.158956 0.392113) + (xy 8.143875 0.350044) + (xy 8.141494 0.294481) + (xy 8.141494 -0.126206) + (xy 8.084344 -0.126206) + (xy 8.025606 -0.145256) + (xy 7.995444 -0.261144) + (xy 8.018859 -0.358775) + (xy 8.089106 -0.391319) + (xy 8.141494 -0.391319) + (xy 8.141494 -0.475456) + (xy 8.163322 -0.591939) + (xy 8.228806 -0.696913) + (xy 8.295658 -0.752034) + (xy 8.379795 -0.785107) + (xy 8.481219 -0.796131) + (xy 8.535988 -0.79375) + (xy 8.578056 -0.778669) + (xy 8.610203 -0.737791) + (xy 8.620919 -0.656431) + (xy 8.593931 -0.546894) + (xy 8.524081 -0.518319) + (xy 8.479631 -0.518319) + (xy 8.420894 -0.478631) + (xy 8.420894 -0.391319) + (xy 8.524081 -0.400844) + (xy 8.610997 -0.385763) + (xy 8.652669 -0.340519) + (xy 8.662194 -0.261144) + (xy 8.651875 -0.182563) + (xy 8.619331 -0.140494) + (xy 8.522494 -0.121444) + (xy 8.420894 -0.127794) + (xy 8.420894 0.297656) + (xy 8.405813 0.38735) + (xy 8.359775 0.426244) + (xy 8.279606 0.435769) + (xy 8.279606 1.12686) + (xy 9.176544 1.12686) + (xy 9.176544 0.454819) + (xy 9.065617 0.444698) + (xy 8.967788 0.414337) + (xy 8.886627 0.367308) + (xy 8.825706 0.307181) + (xy 8.770144 0.218105) + (xy 8.736806 0.122326) + (xy 8.725694 0.019844) + (xy 8.740069 -0.104599) + (xy 8.783197 -0.211226) + (xy 8.855075 -0.300037) + (xy 8.948473 -0.366624) + (xy 9.056158 -0.406576) + (xy 9.178131 -0.419894) + (xy 9.28112 -0.41017) + (xy 9.369425 -0.381) + (xy 9.443045 -0.332383) + (xy 9.501981 -0.264319) + (xy 9.542463 -0.177998) + (xy 9.555956 -0.084137) + (xy 9.543852 0.000794) + (xy 9.507538 0.060325) + (xy 9.400381 0.107156) + (xy 9.024144 0.107156) + (xy 9.076531 0.181769) + (xy 9.181306 0.211931) + (xy 9.263459 0.207169) + (xy 9.325769 0.192881) + (xy 9.343231 0.186531) + (xy 9.406731 0.169069) + (xy 9.494044 0.240506) + (xy 9.514681 0.313531) + (xy 9.493548 0.375345) + (xy 9.430147 0.419497) + (xy 9.324479 0.445988) + (xy 9.176544 0.454819) + (xy 9.176544 1.12686) + (xy 9.797256 1.12686) + (xy 9.797256 0.434181) + (xy 9.687719 0.407194) + (xy 9.659144 0.338931) + (xy 9.659144 0.292894) + (xy 9.659144 -0.264319) + (xy 9.661525 -0.319087) + (xy 9.675019 -0.359569) + (xy 9.717088 -0.391716) + (xy 9.798844 -0.402431) + (xy 9.876234 -0.393303) + (xy 9.917906 -0.365919) + (xy 9.935369 -0.313531) + (xy 9.958387 -0.340519) + (xy 10.022681 -0.383381) + (xy 10.1092 -0.410369) + (xy 10.171906 -0.4064) + (xy 10.227469 -0.392906) + (xy 10.277475 -0.360363) + (xy 10.297319 -0.286544) + (xy 10.267156 -0.175419) + (xy 10.179844 -0.115094) + (xy 10.125075 -0.127794) + (xy 10.056019 -0.140494) + (xy 9.97585 -0.110331) + (xy 9.938544 -0.037306) + (xy 9.938544 0.296069) + (xy 9.936163 0.350837) + (xy 9.921081 0.392906) + (xy 9.878219 0.423863) + (xy 9.797256 0.434181) + (xy 9.797256 1.12686) + (xy 10.297319 1.12686) + (xy 10.42961 1.12686) + (xy 11.105727 -1.12686) + (xy 10.42961 -1.12686) + (xy 10.297319 -1.12686) + (xy -10.297319 -1.12686) + ) + + (stroke (width 0) (type solid)) (fill solid) (layer "F.SilkS") (tstamp f4696094-1f62-4732-a693-a39eb7dae4d4)) + ) + + (footprint "Capacitor_SMD:C_0805_2012Metric" (layer "F.Cu") + (tstamp 14078928-c648-4741-8bb4-742f6757c9da) + (at 159.385 66.821 90) + (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") + (tags "capacitor") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Unpolarized capacitor, small symbol") + (property "ki_keywords" "capacitor cap") + (path "/e050892b-2ac2-4b46-9f15-1b6e05651fd0") + (attr smd) + (fp_text reference "C16" (at -0.87 -2.159 180) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 588b7124-f9d8-45a0-8756-dd69b9be1edd) + ) + (fp_text value "10nF" (at 0 1.68 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 167250bf-ca2c-4e2c-886b-9604486b2679) + ) + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.08))) + (tstamp 7dbb994e-7269-4b2e-8fb4-576765543798) + ) + (fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 27ae1925-94fc-4750-8f68-aaaaa52e7532)) + (fp_line (start -0.261252 0.735) (end 0.261252 0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 63898b1c-0294-4251-bc39-ff78665e0e52)) + (fp_line (start -1.7 -0.98) (end 1.7 -0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 8c1b6b87-c1dd-42fb-868f-168ee99fdb02)) + (fp_line (start -1.7 0.98) (end -1.7 -0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 10655984-57aa-40d8-80c1-6b85c22c0a44)) + (fp_line (start 1.7 -0.98) (end 1.7 0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 561194ff-9195-4266-a26f-ad46290416a9)) + (fp_line (start 1.7 0.98) (end -1.7 0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 74814c8a-bfd7-47fe-9631-0cd57bcdc88e)) + (fp_line (start -1 -0.625) (end 1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp fc16f376-32d7-40c4-854a-dc84095bfde8)) + (fp_line (start -1 0.625) (end -1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp f9dccb85-3dd3-458d-ab82-5fafb1851b98)) + (fp_line (start 1 -0.625) (end 1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 46128896-f8f2-4468-aa76-ef000f8cc15d)) + (fp_line (start 1 0.625) (end -1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 57cd1f19-e77b-444a-a2a5-9cb534ccb1b0)) + (pad "1" smd roundrect (at -0.95 0 90) (size 1 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 19 "Net-(C16-Pad1)") (pintype "passive") (tstamp f29d9f85-6b86-4945-bfc8-bd223b3f7735)) + (pad "2" smd roundrect (at 0.95 0 90) (size 1 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 20 "Net-(D7-K)") (pintype "passive") (tstamp c0b6ecb9-dfbf-40f5-97a2-9990743211e9)) + (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Package_SO:SO-14_3.9x8.65mm_P1.27mm" (layer "F.Cu") + (tstamp 1addaa13-61ba-4d4c-99f5-08be0aea9dfd) + (at 160.9363 72.4192 90) + (descr "SO, 14 Pin (https://www.st.com/resource/en/datasheet/l6491.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py") + (tags "SO SO") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Hex inverter schmitt trigger") + (property "ki_keywords" "HCMOS not inverter") + (path "/a9320142-9d95-47c4-bb5e-3bd65e324fb4") + (attr smd) + (fp_text reference "U2" (at -2.3838 -5.6153 180) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp ca7887e4-6e99-4c22-9f2b-fd42ea66d83c) + ) + (fp_text value "HEF40106BT" (at 0 5.28 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 2c46e1ca-6480-48ad-8df4-7025056a5493) + ) + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") + (effects (font (size 0.98 0.98) (thickness 0.15))) + (tstamp 723ee0ca-45e7-4caa-9974-43b253abacbd) + ) + (fp_line (start 0 -4.435) (end -3.45 -4.435) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 61e98dbf-fa73-4bb2-91f6-ce1f5a6248c4)) + (fp_line (start 0 -4.435) (end 1.95 -4.435) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp fc0f04ac-ff8a-4bf2-9bd8-d2c8b5eb608f)) + (fp_line (start 0 4.435) (end -1.95 4.435) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 99994414-2a04-48dc-9444-29c448670d42)) + (fp_line (start 0 4.435) (end 1.95 4.435) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp c28e0e23-85b0-4bab-a623-e50c8b1f8aed)) + (fp_line (start -3.7 -4.58) (end -3.7 4.58) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 8c57aa8e-11e7-4b45-82ce-dbe1cefbfac3)) + (fp_line (start -3.7 4.58) (end 3.7 4.58) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 11251317-73fb-47bf-8f1b-d91c739e3279)) + (fp_line (start 3.7 -4.58) (end -3.7 -4.58) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 263c95b9-efbf-40b1-ba0c-6fffeb32385a)) + (fp_line (start 3.7 4.58) (end 3.7 -4.58) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 98f6f8c6-76f9-4b3c-9fa1-592ca4debfa6)) + (fp_line (start -1.95 -3.35) (end -0.975 -4.325) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 23f01d18-a207-4fe3-ad9e-abfaa390437f)) + (fp_line (start -1.95 4.325) (end -1.95 -3.35) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp ee53c48f-cc6c-46f8-8fff-af020d46db97)) + (fp_line (start -0.975 -4.325) (end 1.95 -4.325) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 7062c2c8-75cf-41c0-8a0e-ebea3283a3a8)) + (fp_line (start 1.95 -4.325) (end 1.95 4.325) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp ff7d25c9-49ea-43f1-8a36-f5f21333995d)) + (fp_line (start 1.95 4.325) (end -1.95 4.325) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 921951c2-4532-4faf-a390-1c28cb33d504)) + (pad "1" smd roundrect (at -2.475 -3.81 90) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 8 "Net-(C9-Pad2)") (pintype "input") (tstamp c6a0bd29-e8e6-4c2b-b183-cbc8d56bb131)) + (pad "2" smd roundrect (at -2.475 -2.54 90) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 9 "Net-(C11-Pad1)") (pintype "output") (tstamp aa28c499-a769-4b1c-81b0-a8a7b986dc9e)) + (pad "3" smd roundrect (at -2.475 -1.27 90) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 9 "Net-(C11-Pad1)") (pintype "input") (tstamp 58b9491c-c5c3-48b2-b3a0-68ea4f04f067)) + (pad "4" smd roundrect (at -2.475 0 90) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 11 "Net-(C12-Pad1)") (pintype "output") (tstamp 1921772a-a319-4cdf-bab4-54e36309e408)) + (pad "5" smd roundrect (at -2.475 1.27 90) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 11 "Net-(C12-Pad1)") (pintype "input") (tstamp 449dac3c-9c13-409e-9ea8-c5c7612cba19)) + (pad "6" smd roundrect (at -2.475 2.54 90) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 13 "Net-(C13-Pad1)") (pintype "output") (tstamp 4b686b61-43fe-4d13-a0e4-ec95a1d4cdb3)) + (pad "7" smd roundrect (at -2.475 3.81 90) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 37 "GNDREF") (pinfunction "GND") (pintype "power_in") (tstamp 8ee9489c-7be7-4ab3-a78e-c0bb4f403f6c)) + (pad "8" smd roundrect (at 2.475 3.81 90) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 15 "Net-(C14-Pad1)") (pintype "output") (tstamp 65a2448f-ca37-431a-b471-74bc0c03d7de)) + (pad "9" smd roundrect (at 2.475 2.54 90) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 13 "Net-(C13-Pad1)") (pintype "input") (tstamp 0001971f-7092-45d0-aca5-2cc15c60b9d9)) + (pad "10" smd roundrect (at 2.475 1.27 90) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 17 "Net-(C15-Pad1)") (pintype "output") (tstamp f86cc083-74bc-4b05-b660-75941aaa4e3f)) + (pad "11" smd roundrect (at 2.475 0 90) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 15 "Net-(C14-Pad1)") (pintype "input") (tstamp e26ce62a-36c3-44f8-8c24-50ea18fad0da)) + (pad "12" smd roundrect (at 2.475 -1.27 90) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 19 "Net-(C16-Pad1)") (pintype "output") (tstamp fa9a47a4-d9e9-4cdf-9e34-a07ed8fa5a0f)) + (pad "13" smd roundrect (at 2.475 -2.54 90) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 17 "Net-(C15-Pad1)") (pintype "input") (tstamp 67e20c96-bc82-4900-b2ae-ade686b0a173)) + (pad "14" smd roundrect (at 2.475 -3.81 90) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 5 "+12V") (pinfunction "VCC") (pintype "power_in") (tstamp 589e95a8-b963-425e-baef-56c6134785e2)) + (model ":KICAD7_3DMODEL_DIR:Package_SO.3dshapes/SOIC-14_3.9x8.7mm_P1.27mm.step" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Diode_SMD:D_MiniMELF_Handsoldering" (layer "F.Cu") + (tstamp 1e939d52-da68-4d6d-81c5-51e77714d112) + (at 161.671 89.916 -90) + (descr "Diode Mini-MELF (SOD-80) Handsoldering") + (tags "Diode Mini-MELF (SOD-80) Handsoldering") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Zener diode") + (property "ki_keywords" "diode") + (path "/9d1d1b0d-192d-4ac6-8817-70bc31bb7150") + (attr smd) + (fp_text reference "D1" (at 5.588 -0.127 -180) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp edbfdb23-aa11-411a-83ac-b105859fdf25) + ) + (fp_text value "12V" (at 0 2 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 6d83f170-337d-489a-820a-0c10d8490b54) + ) + (fp_text user "${REFERENCE}" (at 0 -2 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 0f95a1db-9f68-40af-b669-9f9180872f16) + ) + (fp_line (start -4.66 -1.11) (end -4.66 1.11) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp eafd5c33-7bf5-4d61-8109-52081ff4d4f2)) + (fp_line (start -4.66 1.11) (end 2.75 1.11) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 569d3007-f4c5-48ff-a915-611cb693fde3)) + (fp_line (start 2.75 -1.11) (end -4.66 -1.11) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp da9cafb6-1d90-4d6b-aaa5-89181aa5800e)) + (fp_line (start -4.65 -1.1) (end 4.65 -1.1) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 7b30df4f-9926-48b3-a9ac-ca216d03856e)) + (fp_line (start -4.65 1.1) (end -4.65 -1.1) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 84669c0f-5699-40a1-ab9e-072fa00525e0)) + (fp_line (start 4.65 -1.1) (end 4.65 1.1) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 6603d3d5-6bcc-45c0-a5f3-e22c119a27cf)) + (fp_line (start 4.65 1.1) (end -4.65 1.1) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 588958d7-ff37-4ef3-a748-bd573615f77e)) + (fp_line (start -1.65 -0.8) (end 1.65 -0.8) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp b8f44df7-5ab5-4c82-a7a1-066c35712845)) + (fp_line (start -1.65 0.8) (end -1.65 -0.8) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp dea775c4-c4a8-4432-b3a6-8e054a2ecadc)) + (fp_line (start -0.75 0) (end -0.35 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 7c033459-3a21-4627-aa09-52b1842cdda8)) + (fp_line (start -0.35 0) (end -0.35 -0.55) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp c694baa8-a74a-4249-bfa6-08531b2f9569)) + (fp_line (start -0.35 0) (end -0.35 0.55) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 65e6ba06-a15f-4087-a0dc-6cbe2ff08e4a)) + (fp_line (start -0.35 0) (end 0.25 -0.4) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 96049606-5909-477d-9d54-c959ab56813c)) + (fp_line (start 0.25 -0.4) (end 0.25 0.4) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp d5c522c6-b60f-442d-ad67-b8f045f58a31)) + (fp_line (start 0.25 0) (end 0.75 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 1b998f2a-3b15-4c4b-98a8-1113c504d609)) + (fp_line (start 0.25 0.4) (end -0.35 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp bfca9bf9-7efa-42bd-95f9-82d7508ae111)) + (fp_line (start 1.65 -0.8) (end 1.65 0.8) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 66502651-ef86-4723-b6ea-aa4175e1053e)) + (fp_line (start 1.65 0.8) (end -1.65 0.8) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 8ce803d1-e0f7-4afe-9096-34c0d4adfcc8)) + (pad "1" smd roundrect (at -2.75 0 270) (size 3.3 1.7) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.1470588235) + (net 5 "+12V") (pinfunction "K") (pintype "passive") (tstamp 252141b8-5d88-457c-8452-a15ae1388cfb)) + (pad "2" smd roundrect (at 2.75 0 270) (size 3.3 1.7) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.1470588235) + (net 37 "GNDREF") (pinfunction "A") (pintype "passive") (tstamp f381f78d-dfb7-4186-bf11-e0b1b23ce9b5)) + (model "${KICAD6_3DMODEL_DIR}/Diode_SMD.3dshapes/D_MiniMELF.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Resistor_SMD:R_0805_2012Metric" (layer "F.Cu") + (tstamp 1fcf7bc9-bd2c-4b98-9358-56644db32332) + (at 153.1385 63.246 90) + (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Resistor, small symbol") + (property "ki_keywords" "R resistor") + (path "/40202721-86ba-485f-9061-2dc736bf1aa3") + (attr smd) + (fp_text reference "R12" (at 2.032 1.2935 180) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 780208f2-7c3e-42c8-ac5f-e25c398038e1) + ) + (fp_text value "2.2k" (at 0 1.65 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 9b489167-5cc5-4e80-9205-0e67ed43c873) + ) + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.08))) + (tstamp 8f33f10b-aa6f-469b-b1e7-288fdf20e84b) + ) + (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 3490a722-80f2-4aec-ae94-15212d9b5304)) + (fp_line (start -0.227064 0.735) (end 0.227064 0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp dc53d81b-980a-4e7b-9885-84d666712dcc)) + (fp_line (start -1.68 -0.95) (end 1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 1e37db9e-bf7c-4894-a419-2fe0188e3779)) + (fp_line (start -1.68 0.95) (end -1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 503fd2c4-736c-49ac-8de7-60b3a6214d6d)) + (fp_line (start 1.68 -0.95) (end 1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 8f76bfb0-1e64-47b4-9396-a0087fe2d175)) + (fp_line (start 1.68 0.95) (end -1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 5612fb2d-13e1-4ef5-9abf-4a17c430a98e)) + (fp_line (start -1 -0.625) (end 1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp b7616c9f-5442-41f7-bfa6-8b0aff3997d4)) + (fp_line (start -1 0.625) (end -1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 557992cc-f431-40cc-87a1-2eda1ac0fe13)) + (fp_line (start 1 -0.625) (end 1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 9cac30ea-2f9d-47b9-bd8a-5d5cc0a6b939)) + (fp_line (start 1 0.625) (end -1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 909c91a0-283f-4080-82dd-96f6228509f7)) + (pad "1" smd roundrect (at -0.9125 0 90) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 27 "Net-(U1B--)") (pintype "passive") (tstamp 61271f50-683d-4384-b2b1-c2982e3a1af2)) + (pad "2" smd roundrect (at 0.9125 0 90) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 4 "Net-(U1A--)") (pintype "passive") (tstamp d30bf83d-1fdb-4e8f-aca2-4a1931084ef4)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Resistor_SMD:R_0805_2012Metric" (layer "F.Cu") + (tstamp 23d4ef7e-772b-4280-b63b-fffbf24e8232) + (at 152.734 80.156 180) + (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Resistor, small symbol") + (property "ki_keywords" "R resistor") + (path "/35c24192-e62e-426a-906e-6187bbf4c10d") + (attr smd) + (fp_text reference "R5" (at 0 -1.65) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 5d27ab7c-b0d8-454b-854f-4cb8fcbd6a7b) + ) + (fp_text value "200" (at 0 1.65) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 3be77114-162e-42fe-ba1f-ed91d2c9b213) + ) + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.08))) + (tstamp ad1bb563-d2ea-4c2f-a12e-501bc0e88940) + ) + (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 3e65173c-8c27-4bbe-b37d-8cdb6bea5661)) + (fp_line (start -0.227064 0.735) (end 0.227064 0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 4925516c-f783-4369-ba4d-cd56a7b15944)) + (fp_line (start -1.68 -0.95) (end 1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp c5636ba0-4086-4e9e-b301-489bf3b25954)) + (fp_line (start -1.68 0.95) (end -1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp fb2cbba7-5b1a-48a0-b371-89bbd72ee9c1)) + (fp_line (start 1.68 -0.95) (end 1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp a57301e0-a29c-4d63-a5d2-e59663967802)) + (fp_line (start 1.68 0.95) (end -1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 73e13c63-f781-4674-ad1d-e8b879fd2250)) + (fp_line (start -1 -0.625) (end 1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 3b162289-bf08-4259-b8b2-3021d8b5477f)) + (fp_line (start -1 0.625) (end -1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 432b0b78-1fc1-42c4-8cc6-526d290035e7)) + (fp_line (start 1 -0.625) (end 1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 7f839503-412b-4517-8902-4fe8bc8d546a)) + (fp_line (start 1 0.625) (end -1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 0ef539d0-fb5c-4c97-8cc6-1e50192881ee)) + (pad "1" smd roundrect (at -0.9125 0 180) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 5 "+12V") (pintype "passive") (tstamp a0b40163-7c67-4f0f-8e1e-9f7ef2f9bac6)) + (pad "2" smd roundrect (at 0.9125 0 180) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 6 "+6V") (pintype "passive") (tstamp 964097fc-3e32-425a-9b24-71819043b854)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Resistor_SMD:R_0805_2012Metric" (layer "F.Cu") + (tstamp 293325ad-8832-4e21-9f13-77b37a7e3198) + (at 162.4349 60.598 180) + (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Resistor, small symbol") + (property "ki_keywords" "R resistor") + (path "/e9d10b3d-688c-42fb-9f7e-b417fdd9a354") + (attr smd) + (fp_text reference "R10" (at 1.6021 1.4668) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp ca453996-1de4-4040-beb3-cc089b540ace) + ) + (fp_text value "100M" (at 0 1.65) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 49251948-21e2-4a60-a124-a6282405ff0c) + ) + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.08))) + (tstamp 223eba9e-257c-47b1-85b9-a5257ad7c518) + ) + (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 28ab91b3-aa98-4490-b312-63a36801f9be)) + (fp_line (start -0.227064 0.735) (end 0.227064 0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp cf1aba4f-fed9-452e-96bb-09913ecbd674)) + (fp_line (start -1.68 -0.95) (end 1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp d2b04682-53e1-463a-a71c-31585ae42211)) + (fp_line (start -1.68 0.95) (end -1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp bd9c5c9f-11b2-4ada-8c72-06c34725abce)) + (fp_line (start 1.68 -0.95) (end 1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 0265db93-329f-4328-b415-26b9ba4f4322)) + (fp_line (start 1.68 0.95) (end -1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp c4df0a49-29de-4ec1-916c-7faf72861114)) + (fp_line (start -1 -0.625) (end 1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 56ebb87c-a8c7-4251-9977-04586fa8e8c2)) + (fp_line (start -1 0.625) (end -1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp b4734125-cbd2-494c-94e9-b282e094e92c)) + (fp_line (start 1 -0.625) (end 1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 80507d31-661c-4a7b-ac12-6ae16a803da9)) + (fp_line (start 1 0.625) (end -1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 628d40fb-0ee8-4725-a30c-544c9a04bb16)) + (pad "1" smd roundrect (at -0.9125 0 180) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 22 "HT") (pintype "passive") (tstamp 86c5b074-3618-46e5-81f2-4014ad95914b)) + (pad "2" smd roundrect (at 0.9125 0 180) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 21 "Net-(C17-Pad2)") (pintype "passive") (tstamp 79e54d68-72ee-4079-a76f-550f40486480)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "kibuzzard-640955D5" (layer "F.Cu") + (tstamp 29fe21af-00fc-48b6-9356-724c68deb9db) + (at 152.654 125.857) + (descr "Generated with KiBuzzard") + (tags "kb_params=eyJBbGlnbm1lbnRDaG9pY2UiOiAiQ2VudGVyIiwgIkNhcExlZnRDaG9pY2UiOiAiKCIsICJDYXBSaWdodENob2ljZSI6ICIpIiwgIkZvbnRDb21ib0JveCI6ICJGcmVkb2thT25lIiwgIkhlaWdodEN0cmwiOiAiMSIsICJMYXllckNvbWJvQm94IjogIkYuU2lsa1MiLCAiTXVsdGlMaW5lVGV4dCI6ICIyIiwgIlBhZGRpbmdCb3R0b21DdHJsIjogIjUiLCAiUGFkZGluZ0xlZnRDdHJsIjogIjIiLCAiUGFkZGluZ1JpZ2h0Q3RybCI6ICIyIiwgIlBhZGRpbmdUb3BDdHJsIjogIjUiLCAiV2lkdGhDdHJsIjogIiJ9") + (attr board_only exclude_from_pos_files exclude_from_bom) + (fp_text reference "kibuzzard-640955D5" (at 0 -3.970867) (layer "F.SilkS") hide + (effects (font (size 0 0) (thickness 0.15))) + (tstamp 6152e8c3-125f-479c-9de9-e1765b49b29d) + ) + (fp_text value "G***" (at 0 3.970867) (layer "F.SilkS") hide + (effects (font (size 0 0) (thickness 0.15))) + (tstamp edc62cbd-7cd5-4fae-ac09-484769c6fc79) + ) + (fp_poly + (pts + (xy -0.451644 -0.922867) + (xy -0.583935 -0.922867) + (xy -0.674392 -0.918423) + (xy -0.763978 -0.905134) + (xy -0.851829 -0.883128) + (xy -0.937101 -0.852618) + (xy -1.018972 -0.813896) + (xy -1.096653 -0.767336) + (xy -1.169396 -0.713386) + (xy -1.236501 -0.652565) + (xy -1.297321 -0.58546) + (xy -1.351271 -0.512717) + (xy -1.397831 -0.435036) + (xy -1.436553 -0.353166) + (xy -1.467064 -0.267894) + (xy -1.489069 -0.180042) + (xy -1.502358 -0.090457) + (xy -1.506802 0) + (xy -1.502358 0.090457) + (xy -1.489069 0.180042) + (xy -1.467064 0.267894) + (xy -1.436553 0.353166) + (xy -1.397831 0.435036) + (xy -1.351271 0.512717) + (xy -1.297321 0.58546) + (xy -1.236501 0.652565) + (xy -1.169396 0.713386) + (xy -1.096653 0.767336) + (xy -1.018972 0.813896) + (xy -0.937101 0.852618) + (xy -0.851829 0.883128) + (xy -0.763978 0.905134) + (xy -0.674392 0.918423) + (xy -0.583935 0.922867) + (xy -0.451644 0.922867) + (xy 0.308769 0.922867) + (xy 0.308769 0.592137) + (xy -0.311944 0.592137) + (xy -0.410369 0.549275) + (xy -0.451644 0.449262) + (xy -0.436761 0.366911) + (xy -0.392113 0.291306) + (xy -0.32643 0.224234) + (xy -0.248444 0.167481) + (xy -0.164306 0.116284) + (xy -0.080169 0.065881) + (xy -0.002183 0.012502) + (xy 0.0635 -0.047625) + (xy 0.108148 -0.113109) + (xy 0.123031 -0.182563) + (xy 0.111919 -0.223044) + (xy 0.087312 -0.265906) + (xy 0.045244 -0.296863) + (xy -0.034131 -0.31115) + (xy -0.122238 -0.273844) + (xy -0.164306 -0.200025) + (xy -0.170656 -0.163512) + (xy -0.170656 -0.153988) + (xy -0.173038 -0.1016) + (xy -0.188119 -0.061912) + (xy -0.230981 -0.033337) + (xy -0.311944 -0.023812) + (xy -0.400447 -0.038894) + (xy -0.443706 -0.084138) + (xy -0.451644 -0.1651) + (xy -0.438503 -0.271374) + (xy -0.39908 -0.370064) + (xy -0.333375 -0.461169) + (xy -0.246415 -0.533929) + (xy -0.143228 -0.577585) + (xy -0.023813 -0.592138) + (xy 0.095691 -0.577409) + (xy 0.199143 -0.533224) + (xy 0.286544 -0.459581) + (xy 0.35269 -0.367065) + (xy 0.392377 -0.266259) + (xy 0.405606 -0.157162) + (xy 0.395684 -0.069056) + (xy 0.365919 0.014287) + (xy 0.322262 0.087313) + (xy 0.270669 0.144463) + (xy 0.159544 0.232172) + (xy 0.061119 0.28575) + (xy 0.021431 0.301625) + (xy 0.021431 0.309562) + (xy 0.311944 0.309562) + (xy 0.404812 0.324644) + (xy 0.442119 0.370681) + (xy 0.451644 0.451644) + (xy 0.441325 0.531812) + (xy 0.407194 0.573088) + (xy 0.308769 0.592137) + (xy 0.308769 0.922867) + (xy 0.451644 0.922867) + (xy 0.583935 0.922867) + (xy 0.674392 0.918423) + (xy 0.763978 0.905134) + (xy 0.851829 0.883128) + (xy 0.937101 0.852618) + (xy 1.018972 0.813896) + (xy 1.096653 0.767336) + (xy 1.169396 0.713386) + (xy 1.236501 0.652565) + (xy 1.297321 0.58546) + (xy 1.351271 0.512717) + (xy 1.397831 0.435036) + (xy 1.436553 0.353166) + (xy 1.467064 0.267894) + (xy 1.489069 0.180042) + (xy 1.502358 0.090457) + (xy 1.506802 0) + (xy 1.502358 -0.090457) + (xy 1.489069 -0.180042) + (xy 1.467064 -0.267894) + (xy 1.436553 -0.353166) + (xy 1.397831 -0.435036) + (xy 1.351271 -0.512717) + (xy 1.297321 -0.58546) + (xy 1.236501 -0.652565) + (xy 1.169396 -0.713386) + (xy 1.096653 -0.767336) + (xy 1.018972 -0.813896) + (xy 0.937101 -0.852618) + (xy 0.851829 -0.883128) + (xy 0.763978 -0.905134) + (xy 0.674392 -0.918423) + (xy 0.583935 -0.922867) + (xy 0.451644 -0.922867) + (xy -0.451644 -0.922867) + ) + + (stroke (width 0) (type solid)) (fill solid) (layer "F.SilkS") (tstamp 19f70192-a032-4329-9c65-aa8c66cd1575)) + ) + + (footprint "Diode_SMD:D_SOD-323_HandSoldering" (layer "F.Cu") + (tstamp 2fddf126-8643-4d33-9d04-7f51a85f7c11) + (at 157.353 64.6468 -90) + (descr "SOD-323") + (tags "SOD-323") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "Sim.Device" "D") + (property "Sim.Pins" "1=K 2=A") + (property "ki_description" "75V 0.15A Fast switching Diode, SOD-323") + (property "ki_keywords" "diode") + (path "/36df970d-43eb-4f99-9d29-e03b9f0c5f6a") + (attr smd) + (fp_text reference "D8" (at 0 1.778 -180) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 7fa65403-4ddf-4594-ba7d-376364e0b26c) + ) + (fp_text value "1N4148WS" (at 0.1 1.9 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 2ff43614-7f40-4f4b-8b92-24deadd5530a) + ) + (fp_text user "${REFERENCE}" (at 0 -1.85 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 97b917e7-2b72-4700-a341-8d97dc8c52f2) + ) + (fp_line (start -2.01 -0.85) (end -2.01 0.85) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp fe7d0afd-548b-4140-8a64-35c507312d26)) + (fp_line (start -2.01 -0.85) (end 1.25 -0.85) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 0544647d-c294-4da2-b607-6fd982370e36)) + (fp_line (start -2.01 0.85) (end 1.25 0.85) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp e9fb4ee7-308e-4ab4-ba1d-3259a236b3d8)) + (fp_line (start -2 -0.95) (end -2 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 5dd991fa-2262-45c2-bce3-a14f0e69c407)) + (fp_line (start -2 -0.95) (end 2 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 76a1ac8e-2677-4b9c-b2f0-4553620818b3)) + (fp_line (start -2 0.95) (end 2 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp f6f8a23a-d1e7-4b2e-92a5-2e1810b63719)) + (fp_line (start 2 -0.95) (end 2 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 80642833-a1b0-43a9-a1f2-84161677f880)) + (fp_line (start -0.9 -0.7) (end 0.9 -0.7) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp f19c0eca-7e2d-41f7-9a26-d9483da75860)) + (fp_line (start -0.9 0.7) (end -0.9 -0.7) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 42f81b54-6688-4d27-baca-1a5c9682a155)) + (fp_line (start -0.3 -0.35) (end -0.3 0.35) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 06a4eb22-5b65-4f63-8567-d1a7b9afd49c)) + (fp_line (start -0.3 0) (end -0.5 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 9be36ed4-4e30-4cc3-8017-57b7a26a57b0)) + (fp_line (start -0.3 0) (end 0.2 -0.35) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp f11cdb7a-0bc0-4a3f-a713-ed4ebad7492e)) + (fp_line (start 0.2 -0.35) (end 0.2 0.35) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp c45a702d-cff5-4ccc-b5f3-18c24fc4e494)) + (fp_line (start 0.2 0) (end 0.45 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp d564d161-afcc-47d0-9f0e-5953c1ee7a1a)) + (fp_line (start 0.2 0.35) (end -0.3 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 0107d8ac-f8c0-4fec-8f55-433a541e9239)) + (fp_line (start 0.9 -0.7) (end 0.9 0.7) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp d2ec7f59-49dd-4284-a0f3-b0ef08e6cfa4)) + (fp_line (start 0.9 0.7) (end -0.9 0.7) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 2f2fdd8c-4f7e-460a-9491-ae9058434417)) + (pad "1" smd roundrect (at -1.25 0 270) (size 1 1) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 23 "Net-(D8-K)") (pinfunction "K") (pintype "passive") (tstamp c3d86d8c-314f-4902-901a-cf0ac59c96ea)) + (pad "2" smd roundrect (at 1.25 0 270) (size 1 1) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 20 "Net-(D7-K)") (pinfunction "A") (pintype "passive") (tstamp 3b1ec37c-845e-4d0a-91bd-90a5b38a9049)) + (model "${KICAD6_3DMODEL_DIR}/Diode_SMD.3dshapes/D_SOD-323.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Capacitor_SMD:CP_Elec_8x10.5" (layer "F.Cu") + (tstamp 353b6c09-0e3b-47a0-906a-a8ab256c1637) + (at 159.4715 101.6 180) + (descr "SMD capacitor, aluminum electrolytic, Vishay 0810, 8.0x10.5mm, http://www.vishay.com/docs/28395/150crz.pdf") + (tags "capacitor electrolytic") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Polarized capacitor, small symbol") + (property "ki_keywords" "cap capacitor") + (path "/ca6b4adf-2322-44ec-b0c5-e22b0c7f5a9b") + (attr smd) + (fp_text reference "C3" (at -7.5335 0.127) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 754f4d94-b3ea-4254-97e2-9b5450e942ca) + ) + (fp_text value "47uF" (at 0 5.3) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 77399714-fc61-478b-81a5-ea93bd55f5ec) + ) + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp b0d05a24-2bd8-4e3d-a0af-f8e6c89d8afe) + ) + (fp_line (start -5.6 -2.51) (end -4.6 -2.51) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp f30d4187-d408-4aa6-a84e-65c9309072e8)) + (fp_line (start -5.1 -3.01) (end -5.1 -2.01) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 2893c544-962b-4c90-a109-e223d0c3ed53)) + (fp_line (start -4.36 -3.295563) (end -4.36 -1.51) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp ea867c67-0d02-4902-b797-0807107ae92e)) + (fp_line (start -4.36 -3.295563) (end -3.295563 -4.36) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 16999c24-5abd-43ee-a33a-47e4ef76ec6b)) + (fp_line (start -4.36 3.295563) (end -4.36 1.51) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 86d962a3-c075-4449-8bd1-84c0f378e900)) + (fp_line (start -4.36 3.295563) (end -3.295563 4.36) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp f31130ed-d43a-41f6-9b30-7a1312752f34)) + (fp_line (start -3.295563 -4.36) (end 4.36 -4.36) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 20219b53-dac0-4fb8-85bc-3990f81d78b2)) + (fp_line (start -3.295563 4.36) (end 4.36 4.36) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp ae343c3e-9e4b-4208-a375-b0e783a432b1)) + (fp_line (start 4.36 -4.36) (end 4.36 -1.51) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp a74519ca-3f33-472c-99b8-bc2ce32e70cb)) + (fp_line (start 4.36 4.36) (end 4.36 1.51) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 7a897f31-1120-4901-9f48-5ac2c57cfadb)) + (fp_line (start -6.15 -1.5) (end -6.15 1.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 88809d5a-4a84-40e0-9248-3189d05d71c6)) + (fp_line (start -6.15 1.5) (end -4.5 1.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp b9400e77-3404-40d0-bb7e-065b0ed77676)) + (fp_line (start -4.5 -3.35) (end -4.5 -1.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 184a1696-423c-4500-8585-ff61ac2e12df)) + (fp_line (start -4.5 -3.35) (end -3.35 -4.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 09e3f836-86f9-427b-b5ee-3b7015bff254)) + (fp_line (start -4.5 -1.5) (end -6.15 -1.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 1ac66740-287f-465e-908f-4746265f3803)) + (fp_line (start -4.5 1.5) (end -4.5 3.35) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp b7dd3920-aba7-4fbb-bb10-28f553c37124)) + (fp_line (start -4.5 3.35) (end -3.35 4.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 62076b93-bddf-4d26-9266-f6bdcd3e63bc)) + (fp_line (start -3.35 -4.5) (end 4.5 -4.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 2f8d4ba7-4e42-4139-8153-b6470efe464c)) + (fp_line (start -3.35 4.5) (end 4.5 4.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 185ab30d-ee2d-4ccc-b39e-d58e853faa4a)) + (fp_line (start 4.5 -4.5) (end 4.5 -1.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 074d0648-044f-468b-bba6-d36b9df4a8e2)) + (fp_line (start 4.5 -1.5) (end 6.15 -1.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 93d0d562-d4b0-490e-a96e-a85dca4d61a5)) + (fp_line (start 4.5 1.5) (end 4.5 4.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp ec381d70-a152-4a97-8f87-edb43d10bbcd)) + (fp_line (start 6.15 -1.5) (end 6.15 1.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 3827c0ee-01ed-4761-9e45-06be821e45c7)) + (fp_line (start 6.15 1.5) (end 4.5 1.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 786d287a-a8a8-4ddb-8d77-784cea4aeed7)) + (fp_line (start -4.25 -3.25) (end -4.25 3.25) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 6e6cacc0-1de0-44dd-8ad7-19ebd32b04ae)) + (fp_line (start -4.25 -3.25) (end -3.25 -4.25) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 5fcf9e79-3f03-4365-8d86-9a22d0e30d67)) + (fp_line (start -4.25 3.25) (end -3.25 4.25) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 4292fdc9-2ac6-4156-89c3-b6268e19333f)) + (fp_line (start -3.562278 -1.5) (end -2.762278 -1.5) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp db7f7cbe-92d8-45a1-9b40-f48b03d99918)) + (fp_line (start -3.25 -4.25) (end 4.25 -4.25) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 6a696995-89b0-4ed2-a8cf-c58435455286)) + (fp_line (start -3.25 4.25) (end 4.25 4.25) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 263a0fba-ee12-4357-92c2-b06c44e5c075)) + (fp_line (start -3.162278 -1.9) (end -3.162278 -1.1) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp f1d78060-676d-4296-a7a6-0300604629dc)) + (fp_line (start 4.25 -4.25) (end 4.25 4.25) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp db6ad9f0-6cd0-4fb3-bb8f-b0cb7ac5a906)) + (fp_circle (center 0 0) (end 4 0) + (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 345b6448-8f36-4b6e-8097-e41039dea9ff)) + (pad "1" smd roundrect (at -3.7 0 180) (size 4.4 2.5) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.1) + (net 5 "+12V") (pintype "passive") (tstamp e8b1c47f-cf12-4df0-8221-9373be968eea)) + (pad "2" smd roundrect (at 3.7 0 180) (size 4.4 2.5) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.1) + (net 37 "GNDREF") (pintype "passive") (tstamp 142622e2-0521-4698-a6d6-afa52978e9be)) + (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/CP_Elec_8x10.5.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Resistor_SMD:R_0805_2012Metric" (layer "F.Cu") + (tstamp 37da5d31-5fa7-4faf-ae76-fff4afb45f5c) + (at 152.6305 120.3725 -90) + (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Resistor, small symbol") + (property "ki_keywords" "R resistor") + (path "/f0800f02-1b1e-41cb-9161-9442ab084dd3") + (attr smd) + (fp_text reference "R2" (at 0.0235 -1.8015 -180) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp beed6614-e622-4c9b-8be0-6a47605e30de) + ) + (fp_text value "47" (at 0 1.65 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 21c8f471-b806-4d8d-b83b-f92bf9b2dcf2) + ) + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.08))) + (tstamp eec12130-c033-428e-ad83-3665519e09f6) + ) + (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 5f3329ae-9bab-4aa8-b8ae-4ee7f3001ff9)) + (fp_line (start -0.227064 0.735) (end 0.227064 0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 5ac97f6c-2280-4de4-a26b-861149f5e8d1)) + (fp_line (start -1.68 -0.95) (end 1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp cef843b6-384e-4f21-ad39-51522807760f)) + (fp_line (start -1.68 0.95) (end -1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 95273271-80fa-43d3-a9a6-1a2d0edbc822)) + (fp_line (start 1.68 -0.95) (end 1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp e567bacc-a53d-4a10-bb74-ae115706faa1)) + (fp_line (start 1.68 0.95) (end -1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp e383995b-5c87-4a47-98a7-02fc30cdd0a7)) + (fp_line (start -1 -0.625) (end 1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 01dc2358-08cc-4a9b-b12a-1c091bb5baaa)) + (fp_line (start -1 0.625) (end -1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 4911e462-9e66-4d3a-bfa3-cdcd48c69076)) + (fp_line (start 1 -0.625) (end 1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp db5ed1f8-41bd-4b76-9726-2ca19841ae97)) + (fp_line (start 1 0.625) (end -1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 54fc56be-976b-41ef-8d7f-1c83850e29e5)) + (pad "1" smd roundrect (at -0.9125 0 270) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 3 "Net-(C2-Pad1)") (pintype "passive") (tstamp 05a5c643-42a6-424c-8993-a1693d1f4202)) + (pad "2" smd roundrect (at 0.9125 0 270) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 24 "Net-(C92-Pad2)") (pintype "passive") (tstamp 1258ae26-57e8-40d2-bc8b-0cb17793547a)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Resistor_SMD:R_0805_2012Metric" (layer "F.Cu") + (tstamp 37fc692a-b595-4c92-9751-bed4f6471383) + (at 150.4715 76.346) + (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Resistor, small symbol") + (property "ki_keywords" "R resistor") + (path "/5e8fc825-55ab-4fc7-8098-8636832cee31") + (attr smd) + (fp_text reference "R6" (at 0 1.778) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 48aec2d5-55a5-4173-b0c0-a723d7246ac6) + ) + (fp_text value "47k" (at 0 1.65) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp da9156ea-4b2e-449e-b831-b621fa5a980b) + ) + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.08))) + (tstamp b8ff0fbd-176d-4a7c-9495-c57fd4b004e2) + ) + (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 36e788e1-ac67-46b6-8c2c-b5147b20b033)) + (fp_line (start -0.227064 0.735) (end 0.227064 0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp b315e5eb-72ed-441e-81c3-df3713418f65)) + (fp_line (start -1.68 -0.95) (end 1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 8e93dc0a-5a77-4705-8cee-bc25786de199)) + (fp_line (start -1.68 0.95) (end -1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 3d199592-e217-420c-856c-a56ab090ec8b)) + (fp_line (start 1.68 -0.95) (end 1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 057c4791-32e3-40b3-8b28-aff066d46975)) + (fp_line (start 1.68 0.95) (end -1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 274eb814-6fc9-47a3-83ad-14dd8bdd2422)) + (fp_line (start -1 -0.625) (end 1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 1a0e6a84-d28d-44ca-b80f-a0241ec8f49e)) + (fp_line (start -1 0.625) (end -1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 6aab258e-0723-4270-9892-0883907963da)) + (fp_line (start 1 -0.625) (end 1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 728f2d7a-dae5-48f3-9b9c-c4b4ce8a9152)) + (fp_line (start 1 0.625) (end -1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 2fddcc70-2865-408e-8a3d-99c3c5a3475b)) + (pad "1" smd roundrect (at -0.9125 0) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 7 "GNDA") (pintype "passive") (tstamp 37855479-3087-4fe2-8fd6-410fb499b20b)) + (pad "2" smd roundrect (at 0.9125 0) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 6 "+6V") (pintype "passive") (tstamp 063aa4f2-70c2-4c2c-9705-063e0053af0e)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "kibuzzard-64095693" (layer "F.Cu") + (tstamp 3a085605-e802-475f-a724-31708db88cec) + (at 137.922 83.566 -90) + (descr "Generated with KiBuzzard") + (tags "kb_params=eyJBbGlnbm1lbnRDaG9pY2UiOiAiQ2VudGVyIiwgIkNhcExlZnRDaG9pY2UiOiAiLyIsICJDYXBSaWdodENob2ljZSI6ICIvIiwgIkZvbnRDb21ib0JveCI6ICJGcmVkb2thT25lIiwgIkhlaWdodEN0cmwiOiAiMSIsICJMYXllckNvbWJvQm94IjogIkYuU2lsa1MiLCAiTXVsdGlMaW5lVGV4dCI6ICJzcGlyaXQucmUiLCAiUGFkZGluZ0JvdHRvbUN0cmwiOiAiNSIsICJQYWRkaW5nTGVmdEN0cmwiOiAiMiIsICJQYWRkaW5nUmlnaHRDdHJsIjogIjIiLCAiUGFkZGluZ1RvcEN0cmwiOiAiNSIsICJXaWR0aEN0cmwiOiAiIn0=") + (attr board_only exclude_from_pos_files exclude_from_bom) + (fp_text reference "kibuzzard-64095693" (at 0 -4.173273 90) (layer "F.SilkS") hide + (effects (font (size 0 0) (thickness 0.15))) + (tstamp 7b775be4-9a55-46c0-be03-34252fec31d9) + ) + (fp_text value "G***" (at 0 4.173273 90) (layer "F.SilkS") hide + (effects (font (size 0 0) (thickness 0.15))) + (tstamp 81e1f805-9cfe-41c7-9026-e5411b2428f4) + ) + (fp_poly + (pts + (xy 2.605088 -0.038894) + (xy 2.665413 -0.089694) + (xy 2.637631 -0.148431) + (xy 2.558256 -0.170656) + (xy 2.455862 -0.128588) + (xy 2.405063 -0.038894) + (xy 2.605088 -0.038894) + ) + + (stroke (width 0) (type solid)) (fill solid) (layer "F.SilkS") (tstamp b7b29764-4277-4473-80e8-3e155db70333)) + (fp_poly + (pts + (xy -1.825625 -0.088106) + (xy -1.862138 0.005556) + (xy -1.824831 0.098425) + (xy -1.729581 0.140494) + (xy -1.631156 0.099219) + (xy -1.590675 0.005556) + (xy -1.628775 -0.0889) + (xy -1.727994 -0.130969) + (xy -1.825625 -0.088106) + ) + + (stroke (width 0) (type solid)) (fill solid) (layer "F.SilkS") (tstamp 8a397064-3401-4901-8675-b48532aeaf85)) + (fp_poly + (pts + (xy -2.94005 -1.125273) + (xy -3.072342 -1.125273) + (xy -3.747505 1.125273) + (xy -3.072342 1.125273) + (xy -2.94005 1.125273) + (xy -2.615406 1.125273) + (xy -2.615406 0.446881) + (xy -2.716213 0.437003) + (xy -2.814373 0.40737) + (xy -2.909888 0.357981) + (xy -2.94005 0.297656) + (xy -2.924969 0.245666) + (xy -2.879725 0.172244) + (xy -2.823369 0.145256) + (xy -2.7178 0.18415) + (xy -2.59715 0.223044) + (xy -2.524522 0.213519) + (xy -2.500313 0.184944) + (xy -2.526903 0.15875) + (xy -2.606675 0.140494) + (xy -2.706291 0.114697) + (xy -2.805113 0.065881) + (xy -2.881313 -0.023812) + (xy -2.903934 -0.090686) + (xy -2.911475 -0.169069) + (xy -2.897696 -0.259366) + (xy -2.856357 -0.329597) + (xy -2.78746 -0.379762) + (xy -2.691003 -0.409861) + (xy -2.566988 -0.419894) + (xy -2.452688 -0.4064) + (xy -2.335213 -0.365919) + (xy -2.27965 -0.302419) + (xy -2.314575 -0.208756) + (xy -2.386013 -0.153194) + (xy -2.456656 -0.177006) + (xy -2.568575 -0.200819) + (xy -2.662238 -0.165894) + (xy -2.63525 -0.126603) + (xy -2.554288 -0.103981) + (xy -2.4511 -0.083344) + (xy -2.351088 -0.043656) + (xy -2.274094 0.033337) + (xy -2.250877 0.095052) + (xy -2.243138 0.170656) + (xy -2.250877 0.247055) + (xy -2.274094 0.31115) + (xy -2.360613 0.397669) + (xy -2.434078 0.425009) + (xy -2.51901 0.441413) + (xy -2.615406 0.446881) + (xy -2.615406 1.125273) + (xy -2.003425 1.125273) + (xy -2.003425 0.794544) + (xy -2.082006 0.785019) + (xy -2.123281 0.753269) + (xy -2.137569 0.713581) + (xy -2.13995 0.659606) + (xy -2.13995 -0.267494) + (xy -2.137569 -0.321469) + (xy -2.124075 -0.361156) + (xy -2.086372 -0.393303) + (xy -2.017713 -0.404019) + (xy -1.904206 -0.382588) + (xy -1.870075 -0.319881) + (xy -1.792486 -0.381794) + (xy -1.680369 -0.402431) + (xy -1.595614 -0.388849) + (xy -1.513858 -0.348103) + (xy -1.4351 -0.280194) + (xy -1.370718 -0.194292) + (xy -1.332089 -0.099572) + (xy -1.319213 0.003969) + (xy -1.332001 0.107509) + (xy -1.370365 0.20223) + (xy -1.434306 0.288131) + (xy -1.512711 0.356041) + (xy -1.594467 0.396787) + (xy -1.679575 0.410369) + (xy -1.791891 0.392113) + (xy -1.868488 0.337344) + (xy -1.868488 0.658019) + (xy -1.870869 0.711994) + (xy -1.885156 0.752475) + (xy -1.925638 0.785019) + (xy -2.003425 0.794544) + (xy -2.003425 1.125273) + (xy -1.077913 1.125273) + (xy -1.077913 0.432594) + (xy -1.158478 0.421878) + (xy -1.20015 0.389731) + (xy -1.213644 0.348456) + (xy -1.216025 0.292894) + (xy -1.216025 -0.264319) + (xy -1.213644 -0.319088) + (xy -1.20015 -0.361156) + (xy -1.158081 -0.392113) + (xy -1.077119 -0.402331) + (xy -1.077119 -0.516731) + (xy -1.157288 -0.526256) + (xy -1.199356 -0.559594) + (xy -1.213644 -0.601663) + (xy -1.216025 -0.656431) + (xy -1.213644 -0.7112) + (xy -1.20015 -0.751681) + (xy -1.158081 -0.783828) + (xy -1.076325 -0.794544) + (xy -0.996156 -0.783828) + (xy -0.955675 -0.751681) + (xy -0.940594 -0.709613) + (xy -0.938213 -0.654844) + (xy -0.940594 -0.600075) + (xy -0.954881 -0.5588) + (xy -0.99695 -0.526256) + (xy -1.077119 -0.516731) + (xy -1.077119 -0.402331) + (xy -1.076325 -0.402431) + (xy -0.968375 -0.375444) + (xy -0.9398 -0.307181) + (xy -0.938213 -0.261144) + (xy -0.938213 0.294481) + (xy -0.940594 0.34925) + (xy -0.955675 0.391319) + (xy -0.996553 0.422275) + (xy -1.077913 0.432594) + (xy -1.077913 1.125273) + (xy -0.6731 1.125273) + (xy -0.6731 0.432594) + (xy -0.782638 0.405606) + (xy -0.811213 0.337344) + (xy -0.811213 0.291306) + (xy -0.811213 -0.265906) + (xy -0.808831 -0.320675) + (xy -0.795338 -0.361156) + (xy -0.753269 -0.393303) + (xy -0.671513 -0.404019) + (xy -0.594122 -0.394891) + (xy -0.55245 -0.367506) + (xy -0.534988 -0.315119) + (xy -0.511969 -0.342106) + (xy -0.447675 -0.384969) + (xy -0.361156 -0.411956) + (xy -0.29845 -0.407988) + (xy -0.242888 -0.394494) + (xy -0.192881 -0.36195) + (xy -0.173038 -0.288131) + (xy -0.2032 -0.177006) + (xy -0.290513 -0.116681) + (xy -0.345281 -0.129381) + (xy -0.414338 -0.142081) + (xy -0.494506 -0.111919) + (xy -0.531813 -0.038894) + (xy -0.531813 0.294481) + (xy -0.534194 0.34925) + (xy -0.549275 0.391319) + (xy -0.592138 0.422275) + (xy -0.6731 0.432594) + (xy -0.6731 1.125273) + (xy 0.052387 1.125273) + (xy 0.052387 0.432594) + (xy -0.028178 0.421878) + (xy -0.06985 0.389731) + (xy -0.083344 0.348456) + (xy -0.085725 0.292894) + (xy -0.085725 -0.264319) + (xy -0.083344 -0.319088) + (xy -0.06985 -0.361156) + (xy -0.027781 -0.392113) + (xy 0.053181 -0.402331) + (xy 0.053181 -0.516731) + (xy -0.026988 -0.526256) + (xy -0.069056 -0.559594) + (xy -0.083344 -0.601663) + (xy -0.085725 -0.656431) + (xy -0.083344 -0.7112) + (xy -0.06985 -0.751681) + (xy -0.027781 -0.783828) + (xy 0.053975 -0.794544) + (xy 0.134144 -0.783828) + (xy 0.174625 -0.751681) + (xy 0.189706 -0.709613) + (xy 0.192087 -0.654844) + (xy 0.189706 -0.600075) + (xy 0.175419 -0.5588) + (xy 0.13335 -0.526256) + (xy 0.053181 -0.516731) + (xy 0.053181 -0.402331) + (xy 0.053975 -0.402431) + (xy 0.161925 -0.375444) + (xy 0.1905 -0.307181) + (xy 0.192087 -0.261144) + (xy 0.192087 0.294481) + (xy 0.189706 0.34925) + (xy 0.174625 0.391319) + (xy 0.133747 0.422275) + (xy 0.052387 0.432594) + (xy 0.052387 1.125273) + (xy 0.762 1.125273) + (xy 0.762 0.432594) + (xy 0.660753 0.424303) + (xy 0.577144 0.399433) + (xy 0.511175 0.357981) + (xy 0.46355 0.296774) + (xy 0.434975 0.212637) + (xy 0.42545 0.105569) + (xy 0.42545 -0.129381) + (xy 0.360362 -0.124619) + (xy 0.302419 -0.151606) + (xy 0.2794 -0.243681) + (xy 0.287337 -0.338138) + (xy 0.309562 -0.380206) + (xy 0.373062 -0.400844) + (xy 0.42545 -0.394494) + (xy 0.42545 -0.558006) + (xy 0.427831 -0.611981) + (xy 0.442912 -0.650081) + (xy 0.483791 -0.679847) + (xy 0.56515 -0.689769) + (xy 0.651272 -0.675084) + (xy 0.693737 -0.631031) + (xy 0.701675 -0.550069) + (xy 0.701675 -0.394494) + (xy 0.807244 -0.400844) + (xy 0.861219 -0.398463) + (xy 0.903287 -0.383381) + (xy 0.934244 -0.342503) + (xy 0.944562 -0.261144) + (xy 0.933847 -0.180578) + (xy 0.9017 -0.138906) + (xy 0.859631 -0.125413) + (xy 0.804862 -0.123031) + (xy 0.701675 -0.129381) + (xy 0.701675 0.089694) + (xy 0.715169 0.151606) + (xy 0.765969 0.170656) + (xy 0.823119 0.173037) + (xy 0.865187 0.188119) + (xy 0.9017 0.294481) + (xy 0.890587 0.375047) + (xy 0.85725 0.416719) + (xy 0.815181 0.430212) + (xy 0.762 0.432594) + (xy 0.762 1.125273) + (xy 1.166019 1.125273) + (xy 1.166019 0.434181) + (xy 1.086247 0.426641) + (xy 1.039019 0.404019) + (xy 1.008062 0.289719) + (xy 1.008062 0.283369) + (xy 1.010444 0.227806) + (xy 1.025525 0.184944) + (xy 1.067395 0.149225) + (xy 1.145381 0.137319) + (xy 1.226542 0.145653) + (xy 1.277937 0.170656) + (xy 1.304925 0.281781) + (xy 1.304925 0.288131) + (xy 1.302544 0.344487) + (xy 1.285875 0.388144) + (xy 1.244005 0.422672) + (xy 1.166019 0.434181) + (xy 1.166019 1.125273) + (xy 1.546225 1.125273) + (xy 1.546225 0.432594) + (xy 1.436687 0.405606) + (xy 1.408112 0.337344) + (xy 1.408112 0.291306) + (xy 1.408112 -0.265906) + (xy 1.410494 -0.320675) + (xy 1.423988 -0.361156) + (xy 1.466056 -0.393303) + (xy 1.547813 -0.404019) + (xy 1.625203 -0.394891) + (xy 1.666875 -0.367506) + (xy 1.684337 -0.315119) + (xy 1.707356 -0.342106) + (xy 1.77165 -0.384969) + (xy 1.858169 -0.411956) + (xy 1.920875 -0.407988) + (xy 1.976437 -0.394494) + (xy 2.026444 -0.36195) + (xy 2.046288 -0.288131) + (xy 2.016125 -0.177006) + (xy 1.928812 -0.116681) + (xy 1.874044 -0.129381) + (xy 1.804987 -0.142081) + (xy 1.724819 -0.111919) + (xy 1.687512 -0.038894) + (xy 1.687512 0.294481) + (xy 1.685131 0.34925) + (xy 1.67005 0.391319) + (xy 1.627188 0.422275) + (xy 1.546225 0.432594) + (xy 1.546225 1.125273) + (xy 2.560638 1.125273) + (xy 2.560638 0.453231) + (xy 2.449711 0.443111) + (xy 2.351881 0.41275) + (xy 2.27072 0.36572) + (xy 2.2098 0.305594) + (xy 2.154237 0.216517) + (xy 2.1209 0.120738) + (xy 2.109787 0.018256) + (xy 2.124163 -0.106186) + (xy 2.16729 -0.212813) + (xy 2.239169 -0.301625) + (xy 2.332567 -0.368212) + (xy 2.440252 -0.408164) + (xy 2.562225 -0.421481) + (xy 2.665214 -0.411758) + (xy 2.753519 -0.382588) + (xy 2.827139 -0.33397) + (xy 2.886075 -0.265906) + (xy 2.926556 -0.179586) + (xy 2.94005 -0.085725) + (xy 2.927945 -0.000794) + (xy 2.891631 0.058737) + (xy 2.784475 0.105569) + (xy 2.408238 0.105569) + (xy 2.460625 0.180181) + (xy 2.5654 0.210344) + (xy 2.647553 0.205581) + (xy 2.709863 0.191294) + (xy 2.727325 0.184944) + (xy 2.790825 0.167481) + (xy 2.878138 0.238919) + (xy 2.898775 0.311944) + (xy 2.877641 0.373757) + (xy 2.814241 0.417909) + (xy 2.708573 0.444401) + (xy 2.560638 0.453231) + (xy 2.560638 1.125273) + (xy 2.94005 1.125273) + (xy 3.072342 1.125273) + (xy 3.747505 -1.125273) + (xy 3.072342 -1.125273) + (xy 2.94005 -1.125273) + (xy -2.94005 -1.125273) + ) + + (stroke (width 0) (type solid)) (fill solid) (layer "F.SilkS") (tstamp fd3a5935-976c-4826-a1bb-8873122288cc)) + ) + + (footprint "Capacitor_SMD:C_0805_2012Metric" (layer "F.Cu") + (tstamp 3f0d150f-bc8a-4f16-b373-450f1f975e8c) + (at 163.449 67.456) + (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") + (tags "capacitor") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Unpolarized capacitor, small symbol") + (property "ki_keywords" "capacitor cap") + (path "/2bae2531-a30b-48b4-b8fc-456e1b222ad3") + (attr smd) + (fp_text reference "C15" (at 5.207 -3.048) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 704dd062-3096-4881-b29f-b7b66c133e79) + ) + (fp_text value "10nF" (at 0 1.68) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp a0d8e4ee-ccdf-45b8-8646-51a64c15000c) + ) + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.08))) + (tstamp 403124e8-cb59-4fbe-adbf-a8bec82a4248) + ) + (fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 96046c8b-5914-40eb-b31e-a20b5951645f)) + (fp_line (start -0.261252 0.735) (end 0.261252 0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp a3095384-79bd-407a-8adb-b0af8c24969a)) + (fp_line (start -1.7 -0.98) (end 1.7 -0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 8ba2970a-c61e-4110-a88e-3bee2d9e89c8)) + (fp_line (start -1.7 0.98) (end -1.7 -0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 89131639-baa2-40c4-b43b-e71132322d1a)) + (fp_line (start 1.7 -0.98) (end 1.7 0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp cbfce953-bf4e-4337-adb7-e12046e9f829)) + (fp_line (start 1.7 0.98) (end -1.7 0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp ce9a690b-1272-4177-a0f7-d8b755558753)) + (fp_line (start -1 -0.625) (end 1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 21774cd8-cb81-4bae-b9be-5fb887fdcf6f)) + (fp_line (start -1 0.625) (end -1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 1fbf5815-4aa0-4cb9-9449-876771b77acf)) + (fp_line (start 1 -0.625) (end 1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp d3e1b547-3c85-4f47-b303-3fa678cc23a3)) + (fp_line (start 1 0.625) (end -1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp c69279e4-6abe-43ca-b868-91717bdad7f3)) + (pad "1" smd roundrect (at -0.95 0) (size 1 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 17 "Net-(C15-Pad1)") (pintype "passive") (tstamp 849e2365-b13d-44f3-80d6-4b973a100341)) + (pad "2" smd roundrect (at 0.95 0) (size 1 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 18 "Net-(D6-K)") (pintype "passive") (tstamp 2c0789bc-844e-44eb-b95b-daa38b4e9479)) + (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Capacitor_SMD:C_0805_2012Metric" (layer "F.Cu") + (tstamp 46cbb2f2-0f42-4075-ae2b-74f3c32e4a73) + (at 160.2505 78.4034 -90) + (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") + (tags "capacitor") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Unpolarized capacitor, small symbol") + (property "ki_keywords" "capacitor cap") + (path "/f12faa88-9258-48c7-b72d-eaabf4df5fea") + (attr smd) + (fp_text reference "C11" (at 5.1816 -1.2935 90) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 1b8fa676-b190-45b3-b3e0-07a529d2f205) + ) + (fp_text value "10nF" (at 0 1.68 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp c917d165-e5b9-4544-95f1-0be649e308ff) + ) + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.08))) + (tstamp b77aa223-2986-401c-9dda-8add279c20e1) + ) + (fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 583b30b6-ea94-4ef1-bc6a-ced4b41d72bc)) + (fp_line (start -0.261252 0.735) (end 0.261252 0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp f0e41c4a-dab9-4243-a207-2c3fda45a37a)) + (fp_line (start -1.7 -0.98) (end 1.7 -0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 8a6c56aa-8d78-46a4-8a05-de786a6ab803)) + (fp_line (start -1.7 0.98) (end -1.7 -0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 2419cd88-c370-42d5-84e5-3268c829f2d0)) + (fp_line (start 1.7 -0.98) (end 1.7 0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 20b8c90b-ebb4-4ca4-a566-14a6f9360996)) + (fp_line (start 1.7 0.98) (end -1.7 0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp ac91caa7-778c-4bd4-8a9f-d75f1febdf59)) + (fp_line (start -1 -0.625) (end 1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 19faf467-c985-4d78-9fd4-f1bae0927607)) + (fp_line (start -1 0.625) (end -1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 58cb2fa3-a7c5-4a71-ae1d-d89000f1b848)) + (fp_line (start 1 -0.625) (end 1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 64dccc4a-eae2-46b3-b9db-ff882c8a1ff7)) + (fp_line (start 1 0.625) (end -1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 74377a36-c0e0-4046-b8dc-e8946f2c16fd)) + (pad "1" smd roundrect (at -0.95 0 270) (size 1 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 9 "Net-(C11-Pad1)") (pintype "passive") (tstamp 6685209e-ab65-47ea-b884-24081d6c86c2)) + (pad "2" smd roundrect (at 0.95 0 270) (size 1 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 10 "Net-(D2-K)") (pintype "passive") (tstamp 82a5e5d7-cc51-4b7f-8416-621e3f91cfb5)) + (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Capacitor_SMD:C_0805_2012Metric" (layer "F.Cu") + (tstamp 497bc3bc-526d-4c22-ada5-f80b3f6b850b) + (at 162.4603 62.63 180) + (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") + (tags "capacitor") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Unpolarized capacitor, small symbol") + (property "ki_keywords" "capacitor cap") + (path "/23b43124-197a-43a3-b96e-26283b651581") + (attr smd) + (fp_text reference "C17" (at -6.3227 0.889) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 48991351-7c4a-46ad-aead-2090c84dea31) + ) + (fp_text value "100nF 100V" (at 0 1.68) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 8b59f54a-75c8-4227-b6d8-f19e8482ea33) + ) + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.08))) + (tstamp 0c177db3-e2e0-4050-b990-64b3ae9a77c1) + ) + (fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp d80e7e37-3814-45b7-80d1-3ba2b8fda6f8)) + (fp_line (start -0.261252 0.735) (end 0.261252 0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp ace614d8-8b28-4c4c-a11d-8b99f528e1f7)) + (fp_line (start -1.7 -0.98) (end 1.7 -0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 045ca5bc-c0ac-4ba2-ac91-5947c3e28f42)) + (fp_line (start -1.7 0.98) (end -1.7 -0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 372e3d10-6ab9-4ae7-bffd-425be8e7170b)) + (fp_line (start 1.7 -0.98) (end 1.7 0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp d125f870-9896-4503-89da-8d0b74f310b8)) + (fp_line (start 1.7 0.98) (end -1.7 0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 17cbe1a0-76f7-4207-955e-f6a094405d9d)) + (fp_line (start -1 -0.625) (end 1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 74624d64-ff0d-4ece-9dda-38a836111d2c)) + (fp_line (start -1 0.625) (end -1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 36a9d525-c30c-4de0-a48b-7625fdef22ca)) + (fp_line (start 1 -0.625) (end 1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 34b8df82-57a0-467e-ab3e-72fc0addea3e)) + (fp_line (start 1 0.625) (end -1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 71f49f14-af05-411e-8e0f-7b2baa9d8d22)) + (pad "1" smd roundrect (at -0.95 0 180) (size 1 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 37 "GNDREF") (pintype "passive") (tstamp 2d57975e-f678-400a-8b2f-c4922516597d)) + (pad "2" smd roundrect (at 0.95 0 180) (size 1 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 21 "Net-(C17-Pad2)") (pintype "passive") (tstamp 0618e453-a123-485b-b6e3-314075d7eb09)) + (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "MountingHole:MountingHole_2.7mm_M2.5_ISO14580" (layer "F.Cu") + (tstamp 4f6d53d0-68c7-4353-bb1a-d8de211075a3) + (at 138.143615 51.396884) + (descr "Mounting Hole 2.7mm, no annular, M2.5, ISO14580") + (tags "mounting hole 2.7mm no annular m2.5 iso14580") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Mounting Hole without connection") + (property "ki_keywords" "mounting hole") + (path "/6a59e984-bacf-4eb3-a1d0-f1bcef13040b") + (attr exclude_from_pos_files) + (fp_text reference "H1" (at 0 -3.25) (layer "F.SilkS") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 00b30772-993d-484c-96f1-6e61adcec7ef) + ) + (fp_text value "M2.5" (at 0 3.25) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp f53d08e4-ac94-4207-96fd-12e7e4bcfdc9) + ) + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 071acebe-a561-4a64-b0db-45bfdc89b7cf) + ) + (fp_circle (center 0 0) (end 2.25 0) + (stroke (width 0.15) (type solid)) (fill none) (layer "Cmts.User") (tstamp d2582b8e-4280-4316-8c4a-2f9969ce61a2)) + (fp_circle (center 0 0) (end 2.5 0) + (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd") (tstamp 583344c5-0edd-4c5d-832a-a1c6ea79a66e)) + (pad "" np_thru_hole oval (at 0 0) (size 3.5 2.7) (drill oval 3.5 2.7) (layers "F&B.Cu" "*.Mask") + (thermal_bridge_angle 45) (tstamp 353ac8c7-ce99-49a3-96ba-59d59a90e13d)) + ) + + (footprint "Diode_SMD:D_SOD-323_HandSoldering" (layer "F.Cu") + (tstamp 4f7c6b51-a915-4fcf-a7ef-1c0d892859a7) + (at 163.0699 81.1466 180) + (descr "SOD-323") + (tags "SOD-323") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "Sim.Device" "D") + (property "Sim.Pins" "1=K 2=A") + (property "ki_description" "75V 0.15A Fast switching Diode, SOD-323") + (property "ki_keywords" "diode") + (path "/8009c4e8-7b49-49df-826f-0519f886b1f3") + (attr smd) + (fp_text reference "D3" (at -2.9191 -1.6764) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 2d9b34d8-d923-41eb-9ee3-0db2de07f733) + ) + (fp_text value "1N4148WS" (at 0.1 1.9) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp f2be3b67-f24f-4b7d-a071-17cb10b0ffba) + ) + (fp_text user "${REFERENCE}" (at 0 -1.85) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 37f64a2b-b450-4913-9dc8-1f749336051d) + ) + (fp_line (start -2.01 -0.85) (end -2.01 0.85) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 9bfa0154-8057-40f6-8009-2805371c83c0)) + (fp_line (start -2.01 -0.85) (end 1.25 -0.85) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 75e88ff4-f6f2-4a68-bbeb-d8e7cad77bb5)) + (fp_line (start -2.01 0.85) (end 1.25 0.85) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 8c9d55cc-bd8c-41e6-b367-bb079ba2a8d0)) + (fp_line (start -2 -0.95) (end -2 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 96f78f6c-76ef-455e-af27-1f6c8106e75b)) + (fp_line (start -2 -0.95) (end 2 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 71ddd841-06cc-46d5-9cbf-15d2a6218456)) + (fp_line (start -2 0.95) (end 2 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 1cc5fc06-f275-4b4b-9a93-dd594f6dea8e)) + (fp_line (start 2 -0.95) (end 2 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 07caadd0-80ef-4bd3-a4ce-90b4176e89ae)) + (fp_line (start -0.9 -0.7) (end 0.9 -0.7) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 0f060841-af7d-4a7c-8c66-c26cfe6f7d99)) + (fp_line (start -0.9 0.7) (end -0.9 -0.7) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 9f8999f6-6ce5-4c2b-b05e-c6bb496c863b)) + (fp_line (start -0.3 -0.35) (end -0.3 0.35) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp d922d4ff-6e5d-438e-8806-082587df4fa9)) + (fp_line (start -0.3 0) (end -0.5 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp c3ce7bf1-16f8-4ba5-885a-55863d7173f3)) + (fp_line (start -0.3 0) (end 0.2 -0.35) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 34e481b6-1dd8-4f2d-9eec-60c164e423e6)) + (fp_line (start 0.2 -0.35) (end 0.2 0.35) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 2136e344-8023-4575-a602-b10f8f0ab2e0)) + (fp_line (start 0.2 0) (end 0.45 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp b1bf2c16-cd30-45e1-9181-dc033d67e43c)) + (fp_line (start 0.2 0.35) (end -0.3 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 0f13b5ed-221c-4447-8ca5-0ddebab5ef21)) + (fp_line (start 0.9 -0.7) (end 0.9 0.7) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp f02dd2fb-1e46-49f1-afd7-a621e377089a)) + (fp_line (start 0.9 0.7) (end -0.9 0.7) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 36086109-70a7-4552-ab10-f390964fd42d)) + (pad "1" smd roundrect (at -1.25 0 180) (size 1 1) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 12 "Net-(D3-K)") (pinfunction "K") (pintype "passive") (tstamp 78266f93-7185-4703-bd60-61a2f1c7aedf)) + (pad "2" smd roundrect (at 1.25 0 180) (size 1 1) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 10 "Net-(D2-K)") (pinfunction "A") (pintype "passive") (tstamp d1d9cc35-53e0-43fd-ab89-a6a929c32eed)) + (model "${KICAD6_3DMODEL_DIR}/Diode_SMD.3dshapes/D_SOD-323.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Resistor_SMD:R_0805_2012Metric" (layer "F.Cu") + (tstamp 4fbc6c2c-0443-41e8-be1e-289911a450fb) + (at 159.6663 62.9958 -90) + (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Resistor, small symbol") + (property "ki_keywords" "R resistor") + (path "/efb75b9d-cd49-40f2-8727-9f48d8b3f04b") + (attr smd) + (fp_text reference "R9" (at -2.2708 0.6623 -180) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 4bc63a97-7a5c-4a35-b9fa-65a8de481342) + ) + (fp_text value "100M" (at 0 1.65 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 01229687-e9f0-4291-aa69-06f2bc054d52) + ) + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.08))) + (tstamp ae34f3df-f324-46e7-bac4-1b737e7789f3) + ) + (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp c2254cd1-75d6-4cec-9d18-1b73ef2c91a2)) + (fp_line (start -0.227064 0.735) (end 0.227064 0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp ba7da211-a29c-4ec5-ac83-224d10e1f218)) + (fp_line (start -1.68 -0.95) (end 1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 273bccfd-5aec-4e0e-acd0-a8eb15cdad86)) + (fp_line (start -1.68 0.95) (end -1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp b944807e-91c3-49d2-93f3-acef4b4e4297)) + (fp_line (start 1.68 -0.95) (end 1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp a176686a-0734-40a4-9824-2b1c8998a21b)) + (fp_line (start 1.68 0.95) (end -1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 548da826-43c3-4b99-b4bd-4a0d3a64abdc)) + (fp_line (start -1 -0.625) (end 1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp eb14641e-01c3-4b47-b1db-b7878c00865e)) + (fp_line (start -1 0.625) (end -1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp dba4a9cb-ed99-4877-9bf5-16399334c2d1)) + (fp_line (start 1 -0.625) (end 1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 5803277a-ff45-419e-b001-91c416163f58)) + (fp_line (start 1 0.625) (end -1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp d3ca4d86-6f65-40bd-95ef-a4073e84579b)) + (pad "1" smd roundrect (at -0.9125 0 270) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 21 "Net-(C17-Pad2)") (pintype "passive") (tstamp d48f563f-fcc9-42e3-93bc-573514e1c519)) + (pad "2" smd roundrect (at 0.9125 0 270) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 23 "Net-(D8-K)") (pintype "passive") (tstamp 8f6d9364-12ed-4845-b72f-fc9f17b9533c)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Resistor_SMD:R_0805_2012Metric" (layer "F.Cu") + (tstamp 539371ef-948d-4b22-bebf-a18a9a0e8a95) + (at 162.4095 118.11) + (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Resistor, small symbol") + (property "ki_keywords" "R resistor") + (path "/cbd183b6-aec5-41eb-8729-8c206275ee14") + (attr smd) + (fp_text reference "R3" (at 2.6905 0.127) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp ee031441-21e6-45cf-bb15-6827e92b27c4) + ) + (fp_text value "2.2k" (at 0 1.65) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp ceef88ac-1fbd-4b7d-8830-162386647108) + ) + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.08))) + (tstamp a4c66310-c09e-4a88-b1d4-7aa6ee451321) + ) + (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 63cd65eb-3435-4811-99f2-279ad0c1eed7)) + (fp_line (start -0.227064 0.735) (end 0.227064 0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 111a0318-718b-4910-b539-30ddb5687b26)) + (fp_line (start -1.68 -0.95) (end 1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp a4e4a13a-882e-4766-bbae-1d560f20def0)) + (fp_line (start -1.68 0.95) (end -1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 1c20df4b-0aec-4576-bd55-b8fc1cbc9d55)) + (fp_line (start 1.68 -0.95) (end 1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 810bbba0-5159-4a81-880d-6f306a96c45c)) + (fp_line (start 1.68 0.95) (end -1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 8fe172af-91bf-4a60-8b82-e299f3383593)) + (fp_line (start -1 -0.625) (end 1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 621dfd9f-5016-48d8-9b54-e2c60493e1b3)) + (fp_line (start -1 0.625) (end -1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp b4d80104-3d6f-4bd3-b20e-499a002e1ca6)) + (fp_line (start 1 -0.625) (end 1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp bc1ede6e-122b-4f32-a3c9-4fafb88169ab)) + (fp_line (start 1 0.625) (end -1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 8306b040-3c39-411b-b176-7db2bb236a18)) + (pad "1" smd roundrect (at -0.9125 0) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 1 "Net-(C1-Pad1)") (pintype "passive") (tstamp b1bc84f4-5685-431d-849a-942007c8f724)) + (pad "2" smd roundrect (at 0.9125 0) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 5 "+12V") (pintype "passive") (tstamp aded76f4-177d-4f29-abbe-1919cf6a6cdc)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Resistor_SMD:R_0805_2012Metric" (layer "F.Cu") + (tstamp 67d412bb-2090-4f78-8500-681b5244bcce) + (at 149.479 69.361) + (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Resistor, small symbol") + (property "ki_keywords" "R resistor") + (path "/28d6d818-3a9e-4390-9a70-ac0093c9b911") + (attr smd) + (fp_text reference "R11" (at -1.524 1.632) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 55710d98-64fe-4048-bd03-bb0237f537c2) + ) + (fp_text value "2.2k" (at 0 1.65) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp a5d31dd7-0e11-4bf1-8ce6-dd5e19935cab) + ) + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.08))) + (tstamp cbde280e-422a-49cb-90d1-d29bee89316b) + ) + (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 51a5e415-a803-4a6c-ba1d-8f8466d2272f)) + (fp_line (start -0.227064 0.735) (end 0.227064 0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp a88fbd6c-980c-4cb9-887e-8afb0865dbb3)) + (fp_line (start -1.68 -0.95) (end 1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 28262761-be44-4b5d-881f-0fae7f7591dc)) + (fp_line (start -1.68 0.95) (end -1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 73d7b979-8d42-4de7-967b-c7daefada4b7)) + (fp_line (start 1.68 -0.95) (end 1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp c60d2afc-ba7e-4511-91b6-ab128b33ab8b)) + (fp_line (start 1.68 0.95) (end -1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp f369ed19-8225-4aa1-a74f-6e3f3ebed887)) + (fp_line (start -1 -0.625) (end 1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp e279ffa6-4a04-4a59-9a06-12c418716f13)) + (fp_line (start -1 0.625) (end -1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 553b84a6-61eb-4d3d-bf52-f352e391ed8a)) + (fp_line (start 1 -0.625) (end 1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp fc764fb8-6d7b-4a01-b197-dade82ba6e19)) + (fp_line (start 1 0.625) (end -1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp f1eef666-4bb3-4b71-a34b-2edbd542b76f)) + (pad "1" smd roundrect (at -0.9125 0) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 27 "Net-(U1B--)") (pintype "passive") (tstamp e1afd3cc-4098-4a66-ad78-4d9b0b59bed2)) + (pad "2" smd roundrect (at 0.9125 0) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 2 "Net-(C1-Pad2)") (pintype "passive") (tstamp 7f833d7d-fbb9-4cbb-929e-7b99a3c6c421)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Resistor_SMD:R_0805_2012Metric" (layer "F.Cu") + (tstamp 6816f5b3-d3f0-4d16-971e-430513b7fa8f) + (at 136.144 57.277 -90) + (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Resistor, small symbol") + (property "ki_keywords" "R resistor") + (path "/bec96768-4199-4211-9268-a0fcd41a2378") + (attr smd) + (fp_text reference "R101" (at 0 -1.65 90) (layer "F.SilkS") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 4dab7978-efbf-4f41-b8e4-ec5446f86f92) + ) + (fp_text value "100M" (at 0 1.65 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp e8abba9b-e1df-4077-a1e4-9531ec5bab2b) + ) + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.08))) + (tstamp 49ed3bbf-0f76-409d-9109-47c7e3856a44) + ) + (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp db1a879f-b662-453d-bc2b-3ff5f3f77dbd)) + (fp_line (start -0.227064 0.735) (end 0.227064 0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 57cd0aec-e3c0-4e48-accd-d734f25fb679)) + (fp_line (start -1.68 -0.95) (end 1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 6b5f45ea-613f-4bf9-839e-16009e9bef74)) + (fp_line (start -1.68 0.95) (end -1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp da0320a0-e5b5-49e0-a766-9166c65bd844)) + (fp_line (start 1.68 -0.95) (end 1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 3e4c4e27-881e-4b99-a512-a3c02cca3572)) + (fp_line (start 1.68 0.95) (end -1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp a487acc7-72cc-49e0-b19b-7cf1aab13d28)) + (fp_line (start -1 -0.625) (end 1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 0e605750-9456-4fa1-9a6c-0b0d92db8a40)) + (fp_line (start -1 0.625) (end -1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 99513c89-de0f-46f0-993f-fb8cc13bdbda)) + (fp_line (start 1 -0.625) (end 1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp d0407147-0ed9-4f82-b724-25641b0ac909)) + (fp_line (start 1 0.625) (end -1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp f448fec4-d9c8-4c84-9acc-d42e133cded9)) + (pad "1" smd roundrect (at -0.9125 0 270) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 26 "Net-(U1A-+)") (pintype "passive") (tstamp a006c7ae-0f3f-4778-94c5-e6ef8154bd75)) + (pad "2" smd roundrect (at 0.9125 0 270) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 28 "Net-(R101-Pad2)") (pintype "passive") (tstamp a1561449-706b-40ed-b568-d53a0dda8b93)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Resistor_SMD:R_0805_2012Metric" (layer "F.Cu") + (tstamp 6edc8caa-bad9-4f1a-948e-e15a86d426e0) + (at 136.144 60.7295 -90) + (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Resistor, small symbol") + (property "ki_keywords" "R resistor") + (path "/67e9300f-162a-4ed4-9bb7-4e4c6500c03c") + (attr smd) + (fp_text reference "R102" (at 0 -1.65 -270) (layer "F.SilkS") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp f90f64d3-33b1-4db0-bd80-d86357563c48) + ) + (fp_text value "100M" (at 0 1.65 -270) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp cac22cf0-4528-4c52-bc35-985837de3889) + ) + (fp_text user "${REFERENCE}" (at 0 0 -270) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.08))) + (tstamp e847b3ac-1f54-488e-8109-1ab0beac41be) + ) + (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 70e75db3-d013-4f30-aca8-52c8dbe9f55a)) + (fp_line (start -0.227064 0.735) (end 0.227064 0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 3044d9b9-d3f2-4e97-b813-c78a11b421a5)) + (fp_line (start -1.68 -0.95) (end 1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp e9a75c0b-6b25-4b9d-8a52-1c2653652e17)) + (fp_line (start -1.68 0.95) (end -1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 54799c8e-76f5-48c3-9fc1-64ce55e26f93)) + (fp_line (start 1.68 -0.95) (end 1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp d0d9944d-e521-4362-a20f-06a74060d600)) + (fp_line (start 1.68 0.95) (end -1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 0aa805d7-5882-4cd3-bbd3-d9fddda3526a)) + (fp_line (start -1 -0.625) (end 1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 40780743-2470-406b-b3f0-fc707ce056d6)) + (fp_line (start -1 0.625) (end -1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 7424c682-649d-4f1a-9979-6dbc35352dcc)) + (fp_line (start 1 -0.625) (end 1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 53e3c1cb-f6c7-4444-a4e2-50c138025e7c)) + (fp_line (start 1 0.625) (end -1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 90fdb76f-a4b3-4262-bdd9-697b4347bb0b)) + (pad "1" smd roundrect (at -0.9125 0 270) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 28 "Net-(R101-Pad2)") (pintype "passive") (tstamp adc95ccf-d483-457a-954f-10c9ceae5783)) + (pad "2" smd roundrect (at 0.9125 0 270) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 29 "Net-(R102-Pad2)") (pintype "passive") (tstamp 83fae39d-e4d7-4916-aa75-712096c07832)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Resistor_SMD:R_0805_2012Metric" (layer "F.Cu") + (tstamp 6fb4942f-ce05-431b-9d93-5c5a7c08491d) + (at 136.144 70.993 -90) + (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Resistor, small symbol") + (property "ki_keywords" "R resistor") + (path "/ac48fe62-99b6-4a37-abf2-58f735c8d96f") + (attr smd) + (fp_text reference "R105" (at 0 -1.65 90) (layer "F.SilkS") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 658a5a5f-1a48-48fe-975b-33f96ce0853c) + ) + (fp_text value "100M" (at 0 1.65 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 0671fbfe-ba3d-4e7e-980f-cbbec286785f) + ) + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.08))) + (tstamp 72e75206-bb82-4232-a58e-551bd01c5c87) + ) + (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 9f134e6b-7dbd-4dad-9138-733079ed5ded)) + (fp_line (start -0.227064 0.735) (end 0.227064 0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 88c72a01-7b37-4791-bb57-6238ffaec7cb)) + (fp_line (start -1.68 -0.95) (end 1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 50951ae6-2475-4a4d-a48a-cd4b56521afb)) + (fp_line (start -1.68 0.95) (end -1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp c39ccfa6-fe16-41cb-806f-335fd9bfe8d1)) + (fp_line (start 1.68 -0.95) (end 1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp eb97e553-bab2-4e93-9f59-aef57973957f)) + (fp_line (start 1.68 0.95) (end -1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 865708f4-fb94-4219-a1c7-6f262329c5c9)) + (fp_line (start -1 -0.625) (end 1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 11e12434-1bb0-47e9-8eaa-89ae210fc699)) + (fp_line (start -1 0.625) (end -1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 2ea5c2c2-b91d-467e-89fb-586bd5fe22cb)) + (fp_line (start 1 -0.625) (end 1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp f3048701-0434-43ff-8237-90d1e42f93c9)) + (fp_line (start 1 0.625) (end -1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 298bae12-a14c-432f-985d-3f1a8789d496)) + (pad "1" smd roundrect (at -0.9125 0 270) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 31 "Net-(R104-Pad2)") (pintype "passive") (tstamp 62136cac-b0be-408b-b98e-cab2ba632bd1)) + (pad "2" smd roundrect (at 0.9125 0 270) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 32 "Net-(R105-Pad2)") (pintype "passive") (tstamp f9b50481-1135-431c-b202-bf349fbcffea)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Resistor_SMD:R_0805_2012Metric" (layer "F.Cu") + (tstamp 76cd1b86-9f60-4ecd-9d97-3f6ba9114a84) + (at 148.67 74.314) + (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Resistor, small symbol") + (property "ki_keywords" "R resistor") + (path "/481c7c37-5d46-41de-9836-acd68f2268c6") + (attr smd) + (fp_text reference "R7" (at -0.588 -1.543) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 5bda4de3-5971-455a-b22a-dce9197862a7) + ) + (fp_text value "47k" (at 0 1.65) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 9e5f207b-9bde-4f2f-902b-49eab5772ebd) + ) + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.08))) + (tstamp 157da546-70e2-4ca0-b44a-4b6996a0b763) + ) + (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 29bdc0fc-828e-47a3-9d50-5a1ba76e2e6b)) + (fp_line (start -0.227064 0.735) (end 0.227064 0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 9e6bbb5f-2e09-4c32-b76a-e8bd786e9153)) + (fp_line (start -1.68 -0.95) (end 1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp ad7a0e95-3a42-4ab0-92e7-96caf72135a1)) + (fp_line (start -1.68 0.95) (end -1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 3ed9e134-ca75-4f5c-b5c2-5d5e81f273db)) + (fp_line (start 1.68 -0.95) (end 1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 0b87259b-2291-47e7-97ac-d77dc78fde44)) + (fp_line (start 1.68 0.95) (end -1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 8f5b477c-e3e2-4f08-b10c-1c4c098cbfa6)) + (fp_line (start -1 -0.625) (end 1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 4db87ab5-eb9e-40bb-b15f-f31ab3b7ed0d)) + (fp_line (start -1 0.625) (end -1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp c676f321-d2a5-4b2a-980b-8ed85e6dde2a)) + (fp_line (start 1 -0.625) (end 1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 3385ad73-f0f9-4e93-87e2-3a1a15d3b569)) + (fp_line (start 1 0.625) (end -1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp d65f6234-4a5f-4498-baa5-086f073826f7)) + (pad "1" smd roundrect (at -0.9125 0) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 37 "GNDREF") (pintype "passive") (tstamp 1369000b-b4c7-4dd3-be7d-6378a838e1ce)) + (pad "2" smd roundrect (at 0.9125 0) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 7 "GNDA") (pintype "passive") (tstamp b6a2a0fe-9896-4227-8e33-74ed6a894b2c)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Capacitor_SMD:C_0805_2012Metric" (layer "F.Cu") + (tstamp 77cc6f4b-ff0c-4f16-9e55-86c099f7876b) + (at 155.3483 70.8698 90) + (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") + (tags "capacitor") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Unpolarized capacitor, small symbol") + (property "ki_keywords" "capacitor cap") + (path "/fca297b3-201b-4da5-822e-74a7a18ff339") + (attr smd) + (fp_text reference "C10" (at -2.4092 -0.9163) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp b3eb09ce-c0be-4573-8871-cd2113ae0b60) + ) + (fp_text value "100nF 100V" (at 0 1.68 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp ba724c0e-781c-49a4-8300-995f47857d58) + ) + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.08))) + (tstamp c80ad046-c39f-48ff-9955-b8d1cc28884a) + ) + (fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 841665a0-26cf-4b7b-9419-c2f33df7e77e)) + (fp_line (start -0.261252 0.735) (end 0.261252 0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp c26d89c7-35c0-4552-af4c-c7ff44059d3f)) + (fp_line (start -1.7 -0.98) (end 1.7 -0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp ba89bbfd-20df-41d1-afbb-916dadda1839)) + (fp_line (start -1.7 0.98) (end -1.7 -0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp fd93aeea-ba15-43dc-87c7-3cf1f1ca3017)) + (fp_line (start 1.7 -0.98) (end 1.7 0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp f6fd07e9-259c-4cd4-8a95-4c7907073b96)) + (fp_line (start 1.7 0.98) (end -1.7 0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 2666c826-56eb-43d4-a125-739681cf9753)) + (fp_line (start -1 -0.625) (end 1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 06b34bd7-568d-4d19-a846-bb50c7a67dbe)) + (fp_line (start -1 0.625) (end -1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp cd22eccc-0c1b-4e22-9d20-7dff265b175d)) + (fp_line (start 1 -0.625) (end 1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 92aacba4-97df-412a-a871-19f54e24240b)) + (fp_line (start 1 0.625) (end -1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 3013dd88-63cb-463a-a56e-c6f0a26b3478)) + (pad "1" smd roundrect (at -0.95 0 90) (size 1 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 37 "GNDREF") (pintype "passive") (tstamp 920694da-d9f6-445a-900a-862c56cca07f)) + (pad "2" smd roundrect (at 0.95 0 90) (size 1 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 5 "+12V") (pintype "passive") (tstamp e2221e49-ae0c-493e-b7a0-9927124591aa)) + (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Resistor_SMD:R_0805_2012Metric" (layer "F.Cu") + (tstamp 78ee01fa-5cee-4a4a-8fea-d9538e3b8a66) + (at 162.4095 120.396) + (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Resistor, small symbol") + (property "ki_keywords" "R resistor") + (path "/07668dee-19e1-4dda-a251-f679ae79ae8a") + (attr smd) + (fp_text reference "R4" (at 2.6905 0.127) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp a1e96310-80e1-4005-9e84-00f6a8e513a6) + ) + (fp_text value "2.2k" (at 0 1.65) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 78a11c85-7071-4dda-8174-d26f98ac48bd) + ) + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.08))) + (tstamp e59dce54-7a72-4707-9802-ad3e12d97ee3) + ) + (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 3a683ca5-cbf6-414a-9d50-659624cc5808)) + (fp_line (start -0.227064 0.735) (end 0.227064 0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 9d79056d-2364-47a7-83b2-25aed0289443)) + (fp_line (start -1.68 -0.95) (end 1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 36eb2945-55d7-4082-a477-d9ecbd6a3004)) + (fp_line (start -1.68 0.95) (end -1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 728a63da-c9c7-4ed1-925a-ca3d50b3ac1a)) + (fp_line (start 1.68 -0.95) (end 1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 37b95768-cd9e-4a03-90ba-3c4b56ec081b)) + (fp_line (start 1.68 0.95) (end -1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp d54ea7fd-25f3-4fa2-a59f-68d5b31605f5)) + (fp_line (start -1 -0.625) (end 1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp f69c1e33-ea39-48be-85a4-7d3234ae1463)) + (fp_line (start -1 0.625) (end -1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp fdd69650-d5c9-4daf-80b3-7c3b7fa80eb8)) + (fp_line (start 1 -0.625) (end 1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 3f60a2aa-f36b-4279-9383-53c2a1bd7c91)) + (fp_line (start 1 0.625) (end -1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 2d07d866-49ff-475d-b78c-b8c4fced2fb1)) + (pad "1" smd roundrect (at -0.9125 0) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 3 "Net-(C2-Pad1)") (pintype "passive") (tstamp dc580752-0e54-43ec-8307-72840437bec2)) + (pad "2" smd roundrect (at 0.9125 0) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 5 "+12V") (pintype "passive") (tstamp 84324c98-90e3-488a-8841-09454d8b8d9d)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Capacitor_SMD:CP_Elec_8x10.5" (layer "F.Cu") + (tstamp 7bc41e30-a649-4da3-b532-7db1ba5fe709) + (at 157.099 112.268 90) + (descr "SMD capacitor, aluminum electrolytic, Vishay 0810, 8.0x10.5mm, http://www.vishay.com/docs/28395/150crz.pdf") + (tags "capacitor electrolytic") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Polarized capacitor, small symbol") + (property "ki_keywords" "cap capacitor") + (path "/06bd1a88-e69b-4d44-b369-663616d75003") + (attr smd) + (fp_text reference "C1" (at 0.127 5.4845 180) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp fdea7e7a-d115-4c60-b264-005b4bdddd21) + ) + (fp_text value "47uF" (at 0 5.3 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 86a8238b-47f5-4905-9bd7-885ef1233425) + ) + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 17b44e71-45fc-4e69-ba65-7909831963c0) + ) + (fp_line (start -5.6 -2.51) (end -4.6 -2.51) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 9ed9640a-9196-4ce8-a16e-616c7683239f)) + (fp_line (start -5.1 -3.01) (end -5.1 -2.01) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp bc3e8052-a45f-4469-8a1e-40e339800ea2)) + (fp_line (start -4.36 -3.295563) (end -4.36 -1.51) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 1dcdb758-7301-4104-a8f8-b27e4ae72bd7)) + (fp_line (start -4.36 -3.295563) (end -3.295563 -4.36) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp ad87ce7c-224b-4e86-bb3b-7673629e7c1f)) + (fp_line (start -4.36 3.295563) (end -4.36 1.51) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 335c9034-cc04-4920-a6f3-d0c9f931f1cf)) + (fp_line (start -4.36 3.295563) (end -3.295563 4.36) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 31c70245-84e0-4e6f-98de-1c5979759b2a)) + (fp_line (start -3.295563 -4.36) (end 4.36 -4.36) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp e56380d1-46be-45d4-806d-ebefc208cc23)) + (fp_line (start -3.295563 4.36) (end 4.36 4.36) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp a8915148-d64d-44bf-92e2-63ad2c26dccd)) + (fp_line (start 4.36 -4.36) (end 4.36 -1.51) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 5455a160-8791-4928-b07b-b94c23cea070)) + (fp_line (start 4.36 4.36) (end 4.36 1.51) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp e888f102-b7c9-4c2f-b755-ea82ab6492b4)) + (fp_line (start -6.15 -1.5) (end -6.15 1.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp d729ea80-df44-40eb-b99c-2f797774f698)) + (fp_line (start -6.15 1.5) (end -4.5 1.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 6363ae26-0fc5-43da-8564-7eeda38d160b)) + (fp_line (start -4.5 -3.35) (end -4.5 -1.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp f616de8e-8fc1-43fd-b779-fad83d1993d6)) + (fp_line (start -4.5 -3.35) (end -3.35 -4.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 24d3edf4-37de-4b61-af76-430428923d43)) + (fp_line (start -4.5 -1.5) (end -6.15 -1.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp cdeec457-d969-47b3-9da9-09e555b833cf)) + (fp_line (start -4.5 1.5) (end -4.5 3.35) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 49364dd0-b738-4fa3-a041-99059f2756af)) + (fp_line (start -4.5 3.35) (end -3.35 4.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 851d10d1-514c-45fd-a702-69a338c1a96d)) + (fp_line (start -3.35 -4.5) (end 4.5 -4.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp cba11bcd-e470-4ee1-90fe-42a142f69052)) + (fp_line (start -3.35 4.5) (end 4.5 4.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 82e346ab-b869-42f0-85e4-ffbbe8fd59cb)) + (fp_line (start 4.5 -4.5) (end 4.5 -1.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp d48b6601-00eb-404c-8dd3-eaf848e990fb)) + (fp_line (start 4.5 -1.5) (end 6.15 -1.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp f32f7a56-0c59-4ce9-9e92-80362e30c6a4)) + (fp_line (start 4.5 1.5) (end 4.5 4.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 2e5b4707-24cf-4d76-8320-5f16279339f1)) + (fp_line (start 6.15 -1.5) (end 6.15 1.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp ac5cfaa9-ce9b-4c6a-ae78-9552ae20c3ac)) + (fp_line (start 6.15 1.5) (end 4.5 1.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp dfff7aba-1b1a-439f-ab42-cb246ee12146)) + (fp_line (start -4.25 -3.25) (end -4.25 3.25) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp f3780eb5-2f9c-4cf4-9560-c7aa4c4e9992)) + (fp_line (start -4.25 -3.25) (end -3.25 -4.25) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 04b195d9-9dfd-4d4d-8f25-25d0ca6a1ab0)) + (fp_line (start -4.25 3.25) (end -3.25 4.25) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 3afc7311-1705-407d-b8e5-0255f9e24a69)) + (fp_line (start -3.562278 -1.5) (end -2.762278 -1.5) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 49c4cb57-0624-458d-b4e0-ad8db6f14d80)) + (fp_line (start -3.25 -4.25) (end 4.25 -4.25) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 8d97e303-25dc-4aa1-93b9-fcf8f6c7b91a)) + (fp_line (start -3.25 4.25) (end 4.25 4.25) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 74dfd1cc-6dbf-4af4-a702-ab588dee11eb)) + (fp_line (start -3.162278 -1.9) (end -3.162278 -1.1) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 1a182740-2433-43b8-b4ed-19c5ac940a75)) + (fp_line (start 4.25 -4.25) (end 4.25 4.25) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 3ebcdf28-af7f-4a1c-a74d-218d5ff7b62a)) + (fp_circle (center 0 0) (end 4 0) + (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 669761c5-67ff-402f-9521-0081c02e101b)) + (pad "1" smd roundrect (at -3.7 0 90) (size 4.4 2.5) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.1) + (net 1 "Net-(C1-Pad1)") (pintype "passive") (tstamp 355b9e74-9d14-40a2-a9c8-4e59cb626bac)) + (pad "2" smd roundrect (at 3.7 0 90) (size 4.4 2.5) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.1) + (net 2 "Net-(C1-Pad2)") (pintype "passive") (tstamp 67adc8db-06c2-44dd-b213-9a53f0aa00ae)) + (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/CP_Elec_8x10.5.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "SpiritsKiCADLib:Pads_3pin_10mm" (layer "F.Cu") + (tstamp 7c0caa0a-a519-40c8-b632-de494a4f4e94) + (at 152.6305 123.444) + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "XLR Connector, Male or Female, 3 Pins") + (property "ki_keywords" "xlr connector") + (path "/9682e027-e2ff-4b4b-87bc-9be07b5ab29c") + (attr smd) + (fp_text reference "J1" (at 0 -1.778 unlocked) (layer "F.SilkS") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp c812a0ee-bf7f-4be9-9a1a-d681a5ddab3a) + ) + (fp_text value "XLR3" (at 0.0508 -0.7112 unlocked) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 4b81c4fa-e52b-4e5b-bb75-3526751f4878) + ) + (fp_rect (start -6.096 -1.0922) (end 6.096 1.1176) + (stroke (width 0.12) (type default)) (fill none) (layer "F.SilkS") (tstamp d0efb482-67bf-414d-b1f6-1683c466a347)) + (fp_rect (start -6.2484 -1.2446) (end 6.223 1.27) + (stroke (width 0.12) (type default)) (fill none) (layer "F.CrtYd") (tstamp 98e5f90c-9f46-40f6-a60c-7329dc822fee)) + (pad "1" smd roundrect (at -5 0) (size 2 2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 37 "GNDREF") (pintype "passive") (thermal_bridge_angle 45) (tstamp df5fc09a-e2a8-4809-be93-8c3f95695031)) + (pad "2" smd roundrect (at 0 0) (size 2 2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 24 "Net-(C92-Pad2)") (pintype "passive") (thermal_bridge_angle 45) (tstamp 3dfb19f3-41dc-4029-98f8-095114156499)) + (pad "3" smd roundrect (at 5 0) (size 2 2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 25 "Net-(C91-Pad1)") (pintype "passive") (thermal_bridge_angle 45) (tstamp d0cb4333-0ef0-41a6-ad0a-af0c1f21dfe4)) + ) + + (footprint "Capacitor_SMD:C_0805_2012Metric" (layer "F.Cu") + (tstamp 7c4764d2-b5e0-4df5-bd6e-c0baa184f0fc) + (at 164.2891 78.4136 -90) + (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") + (tags "capacitor") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Unpolarized capacitor, small symbol") + (property "ki_keywords" "capacitor cap") + (path "/086715c8-4672-4319-9176-bcd30eb30c39") + (attr smd) + (fp_text reference "C13" (at 5.1816 0.1035 90) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 0a2d978e-e567-45f5-8df6-9e7c61406bec) + ) + (fp_text value "10nF" (at 0 1.68 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 40a5516e-8979-4d00-87ea-e0430ba4eace) + ) + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.08))) + (tstamp 146ed3e2-e9c2-4f9a-ba98-d6980aa1c275) + ) + (fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 9c7c6fa7-b6e6-4b04-b9fd-09bce775f4aa)) + (fp_line (start -0.261252 0.735) (end 0.261252 0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 270c8df6-d966-41a0-9231-b42a9008f0da)) + (fp_line (start -1.7 -0.98) (end 1.7 -0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 4a0e430a-7e23-40e1-a369-093f82004ff8)) + (fp_line (start -1.7 0.98) (end -1.7 -0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp b765df84-ef5c-453b-8a4a-b5ea58f12426)) + (fp_line (start 1.7 -0.98) (end 1.7 0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 42c3d128-0607-4880-908a-52a3770808cd)) + (fp_line (start 1.7 0.98) (end -1.7 0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp ac128526-816f-4c12-bd94-749b5bb33a84)) + (fp_line (start -1 -0.625) (end 1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 5022c643-e1ec-44ed-8e66-9a7262d04241)) + (fp_line (start -1 0.625) (end -1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 6a49fc3f-d7d7-4aff-b225-4b87114b7c58)) + (fp_line (start 1 -0.625) (end 1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 65a52d6e-0d77-4554-b3f3-0e72a2973633)) + (fp_line (start 1 0.625) (end -1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 40af4542-ac07-46db-a181-21670801ffad)) + (pad "1" smd roundrect (at -0.95 0 270) (size 1 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 13 "Net-(C13-Pad1)") (pintype "passive") (tstamp c3a8b5c1-37cf-420f-9dd0-f6026ebe33c3)) + (pad "2" smd roundrect (at 0.95 0 270) (size 1 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 14 "Net-(D4-K)") (pintype "passive") (tstamp ddeca69e-750c-48d0-8f13-6402c6c5a216)) + (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Capacitor_SMD:C_0805_2012Metric" (layer "F.Cu") + (tstamp 81a005af-6f75-4499-ae28-acbf7e62fdc6) + (at 149.733 58.928) + (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") + (tags "capacitor") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Unpolarized capacitor, small symbol") + (property "ki_keywords" "capacitor cap") + (path "/9cc259cd-57d4-47be-b4c4-b2634ce82332") + (attr smd) + (fp_text reference "C19" (at -3.1242 -0.508) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp b2a358ff-d036-45e6-8329-4cc019b185fb) + ) + (fp_text value "1nF 100V" (at 0 1.68) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 7250e2f8-3157-4bc3-b856-c18cc78ea686) + ) + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.08))) + (tstamp 1fd94c46-2c4b-4cae-b55d-22e7c2f6c9f3) + ) + (fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 78659908-49e3-4b9c-9528-8d79ed3e1dc0)) + (fp_line (start -0.261252 0.735) (end 0.261252 0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp d88a34b5-49d3-4b73-97e2-ec2b17273081)) + (fp_line (start -1.7 -0.98) (end 1.7 -0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 0ba8abb6-60d0-486c-b0b5-e0396a2ad1ba)) + (fp_line (start -1.7 0.98) (end -1.7 -0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp e1a9e3af-8f2a-4016-aba9-1078a22c1828)) + (fp_line (start 1.7 -0.98) (end 1.7 0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 3bc32b4e-1d2f-455a-9337-69a8c1dc3590)) + (fp_line (start 1.7 0.98) (end -1.7 0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 918a1d08-c96b-43c4-90fc-c67ddaf2cef7)) + (fp_line (start -1 -0.625) (end 1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 88bde470-61c5-4aa3-a00c-c5ce09ced8ac)) + (fp_line (start -1 0.625) (end -1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp d2aedaf2-557d-485c-b55d-79a6075449b0)) + (fp_line (start 1 -0.625) (end 1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp e2159375-ef65-46cb-af03-704d507871bf)) + (fp_line (start 1 0.625) (end -1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 7dd18455-f121-47b6-b583-55d003c67337)) + (pad "1" smd roundrect (at -0.95 0) (size 1 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 26 "Net-(U1A-+)") (pintype "passive") (tstamp ff3c6c50-75c1-408e-b785-f4cb689e33e2)) + (pad "2" smd roundrect (at 0.95 0) (size 1 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 38 "Net-(MK1-+)") (pintype "passive") (tstamp 66107daf-5726-40e5-a139-5b77f3da53ad)) + (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "kibuzzard-64153C31" (layer "F.Cu") + (tstamp 89c2cdc3-260c-4d06-885b-6435b7277701) + (at 151.384 53.594) + (descr "Generated with KiBuzzard") + (tags "kb_params=eyJBbGlnbm1lbnRDaG9pY2UiOiAiQ2VudGVyIiwgIkNhcExlZnRDaG9pY2UiOiAiKCIsICJDYXBSaWdodENob2ljZSI6ICIpIiwgIkZvbnRDb21ib0JveCI6ICJGcmVkb2thT25lIiwgIkhlaWdodEN0cmwiOiAiMSIsICJMYXllckNvbWJvQm94IjogIkYuU2lsa1MiLCAiTXVsdGlMaW5lVGV4dCI6ICJEaWFwaHJhZ20iLCAiUGFkZGluZ0JvdHRvbUN0cmwiOiAiNSIsICJQYWRkaW5nTGVmdEN0cmwiOiAiMiIsICJQYWRkaW5nUmlnaHRDdHJsIjogIjIiLCAiUGFkZGluZ1RvcEN0cmwiOiAiNSIsICJXaWR0aEN0cmwiOiAiIn0=") + (attr board_only exclude_from_pos_files exclude_from_bom) + (fp_text reference "kibuzzard-64153C31" (at 0 -4.173273) (layer "F.SilkS") hide + (effects (font (size 0 0) (thickness 0.15))) + (tstamp b487dc37-ec3e-44d5-a5e8-3e4493b4ac9b) + ) + (fp_text value "G***" (at 0 4.173273) (layer "F.SilkS") hide + (effects (font (size 0 0) (thickness 0.15))) + (tstamp 3cae9f7d-5bd6-4f1a-baae-b9303caaba0b) + ) + (fp_poly + (pts + (xy -2.312194 0.015081) + (xy -2.270919 0.109537) + (xy -2.170906 0.151606) + (xy -2.073275 0.108744) + (xy -2.034381 0.014288) + (xy -2.071687 -0.081756) + (xy -2.1717 -0.126206) + (xy -2.2733 -0.081756) + (xy -2.312194 0.015081) + ) + + (stroke (width 0) (type solid)) (fill solid) (layer "F.SilkS") (tstamp f9535d35-db76-4272-a972-f80c35666d96)) + (fp_poly + (pts + (xy -1.305719 -0.088106) + (xy -1.342231 0.005556) + (xy -1.304925 0.098425) + (xy -1.209675 0.140494) + (xy -1.11125 0.099219) + (xy -1.070769 0.005556) + (xy -1.108869 -0.0889) + (xy -1.208087 -0.130969) + (xy -1.305719 -0.088106) + ) + + (stroke (width 0) (type solid)) (fill solid) (layer "F.SilkS") (tstamp 314dd646-db33-49d6-b439-7b50016ce1bd)) + (fp_poly + (pts + (xy 1.243806 0.015081) + (xy 1.285081 0.109537) + (xy 1.385094 0.151606) + (xy 1.482725 0.108744) + (xy 1.521619 0.014288) + (xy 1.484313 -0.081756) + (xy 1.3843 -0.126206) + (xy 1.2827 -0.081756) + (xy 1.243806 0.015081) + ) + + (stroke (width 0) (type solid)) (fill solid) (layer "F.SilkS") (tstamp 51a66017-a397-4463-aa3a-b73bb68df7c6)) + (fp_poly + (pts + (xy 2.183606 0.003175) + (xy 2.224088 0.096044) + (xy 2.322513 0.137319) + (xy 2.418556 0.09525) + (xy 2.456656 0.003175) + (xy 2.420144 -0.090488) + (xy 2.321719 -0.134144) + (xy 2.221706 -0.091281) + (xy 2.183606 0.003175) + ) + + (stroke (width 0) (type solid)) (fill solid) (layer "F.SilkS") (tstamp 5cff6db3-7c70-4f9e-bf76-7d41354430a1)) + (fp_poly + (pts + (xy -3.655219 -0.450056) + (xy -3.807619 -0.450056) + (xy -3.807619 0.150019) + (xy -3.653631 0.150019) + (xy -3.544887 0.128786) + (xy -3.447256 0.065087) + (xy -3.3782 -0.030758) + (xy -3.355181 -0.148431) + (xy -3.377605 -0.266502) + (xy -3.444875 -0.363538) + (xy -3.542308 -0.428427) + (xy -3.655219 -0.450056) + ) + + (stroke (width 0) (type solid)) (fill solid) (layer "F.SilkS") (tstamp d02b0409-6847-44c8-aea8-68800fa443e9)) + (fp_poly + (pts + (xy -4.088606 -1.125273) + (xy -4.220898 -1.125273) + (xy -4.331194 -1.119854) + (xy -4.440428 -1.103651) + (xy -4.547547 -1.076819) + (xy -4.651521 -1.039617) + (xy -4.751348 -0.992402) + (xy -4.846066 -0.93563) + (xy -4.934763 -0.869848) + (xy -5.016586 -0.795688) + (xy -5.090746 -0.713866) + (xy -5.156528 -0.625168) + (xy -5.2133 -0.53045) + (xy -5.260514 -0.430623) + (xy -5.297717 -0.326649) + (xy -5.324549 -0.21953) + (xy -5.340752 -0.110296) + (xy -5.346171 0) + (xy -5.340752 0.110296) + (xy -5.324549 0.21953) + (xy -5.297717 0.326649) + (xy -5.260514 0.430623) + (xy -5.2133 0.53045) + (xy -5.156528 0.625168) + (xy -5.090746 0.713866) + (xy -5.016586 0.795688) + (xy -4.934763 0.869848) + (xy -4.846066 0.93563) + (xy -4.751348 0.992402) + (xy -4.651521 1.039617) + (xy -4.547547 1.076819) + (xy -4.440428 1.103651) + (xy -4.331194 1.119854) + (xy -4.220898 1.125273) + (xy -4.088606 1.125273) + (xy -3.658394 1.125273) + (xy -3.658394 0.431006) + (xy -3.948906 0.431006) + (xy -4.027487 0.421084) + (xy -4.069556 0.391319) + (xy -4.088606 0.289719) + (xy -4.088606 -0.592931) + (xy -4.086225 -0.648494) + (xy -4.071144 -0.689769) + (xy -4.029075 -0.721916) + (xy -3.947319 -0.732631) + (xy -3.653631 -0.731044) + (xy -3.54201 -0.720675) + (xy -3.437334 -0.68957) + (xy -3.339604 -0.637729) + (xy -3.248819 -0.56515) + (xy -3.17242 -0.477441) + (xy -3.11785 -0.380206) + (xy -3.085108 -0.273447) + (xy -3.074194 -0.157163) + (xy -3.08486 -0.040432) + (xy -3.116858 0.067667) + (xy -3.170188 0.167134) + (xy -3.24485 0.257969) + (xy -3.334692 0.333673) + (xy -3.433564 0.387747) + (xy -3.541464 0.420191) + (xy -3.658394 0.431006) + (xy -3.658394 1.125273) + (xy -2.832894 1.125273) + (xy -2.832894 0.432594) + (xy -2.913459 0.421878) + (xy -2.955131 0.389731) + (xy -2.968625 0.348456) + (xy -2.971006 0.292894) + (xy -2.971006 -0.264319) + (xy -2.968625 -0.319088) + (xy -2.955131 -0.361156) + (xy -2.913062 -0.392113) + (xy -2.8321 -0.402331) + (xy -2.8321 -0.516731) + (xy -2.912269 -0.526256) + (xy -2.954337 -0.559594) + (xy -2.968625 -0.601663) + (xy -2.971006 -0.656431) + (xy -2.968625 -0.7112) + (xy -2.955131 -0.751681) + (xy -2.913062 -0.783828) + (xy -2.831306 -0.794544) + (xy -2.751137 -0.783828) + (xy -2.710656 -0.751681) + (xy -2.695575 -0.709613) + (xy -2.693194 -0.654844) + (xy -2.695575 -0.600075) + (xy -2.709862 -0.5588) + (xy -2.751931 -0.526256) + (xy -2.8321 -0.516731) + (xy -2.8321 -0.402331) + (xy -2.831306 -0.402431) + (xy -2.723356 -0.375444) + (xy -2.694781 -0.307181) + (xy -2.693194 -0.261144) + (xy -2.693194 0.294481) + (xy -2.695575 0.34925) + (xy -2.710656 0.391319) + (xy -2.751534 0.422275) + (xy -2.832894 0.432594) + (xy -2.832894 1.125273) + (xy -1.871662 1.125273) + (xy -1.871662 0.429419) + (xy -1.98755 0.407987) + (xy -2.021681 0.345281) + (xy -2.100064 0.408384) + (xy -2.217737 0.429419) + (xy -2.307078 0.415484) + (xy -2.39201 0.37368) + (xy -2.472531 0.304006) + (xy -2.537795 0.2159) + (xy -2.576953 0.118798) + (xy -2.590006 0.0127) + (xy -2.576865 -0.09331) + (xy -2.537442 -0.190147) + (xy -2.471737 -0.277813) + (xy -2.390334 -0.347045) + (xy -2.303815 -0.388585) + (xy -2.212181 -0.402431) + (xy -2.113756 -0.383381) + (xy -2.051844 -0.347663) + (xy -2.023269 -0.315119) + (xy -1.987153 -0.381794) + (xy -1.897856 -0.404019) + (xy -1.805781 -0.394494) + (xy -1.763712 -0.361156) + (xy -1.749425 -0.319088) + (xy -1.747044 -0.264319) + (xy -1.747044 0.291306) + (xy -1.749425 0.346075) + (xy -1.762919 0.388144) + (xy -1.801217 0.4191) + (xy -1.871662 0.429419) + (xy -1.871662 1.125273) + (xy -1.483519 1.125273) + (xy -1.483519 0.794544) + (xy -1.5621 0.785019) + (xy -1.603375 0.753269) + (xy -1.617662 0.713581) + (xy -1.620044 0.659606) + (xy -1.620044 -0.267494) + (xy -1.617662 -0.321469) + (xy -1.604169 -0.361156) + (xy -1.566466 -0.393303) + (xy -1.497806 -0.404019) + (xy -1.3843 -0.382588) + (xy -1.350169 -0.319881) + (xy -1.27258 -0.381794) + (xy -1.160462 -0.402431) + (xy -1.075708 -0.388849) + (xy -0.993951 -0.348103) + (xy -0.915194 -0.280194) + (xy -0.850812 -0.194292) + (xy -0.812183 -0.099572) + (xy -0.799306 0.003969) + (xy -0.812094 0.107509) + (xy -0.850459 0.20223) + (xy -0.9144 0.288131) + (xy -0.992805 0.356041) + (xy -1.074561 0.396787) + (xy -1.159669 0.410369) + (xy -1.271984 0.392113) + (xy -1.348581 0.337344) + (xy -1.348581 0.658019) + (xy -1.350962 0.711994) + (xy -1.36525 0.752475) + (xy -1.405731 0.785019) + (xy -1.483519 0.794544) + (xy -1.483519 1.125273) + (xy -0.002381 1.125273) + (xy -0.002381 0.432594) + (xy -0.080962 0.422275) + (xy -0.123031 0.391319) + (xy -0.138112 0.348456) + (xy -0.140494 0.291306) + (xy -0.140494 0.013494) + (xy -0.177006 -0.088106) + (xy -0.269875 -0.124619) + (xy -0.369094 -0.090488) + (xy -0.418306 -0.013494) + (xy -0.418306 0.294481) + (xy -0.420687 0.34925) + (xy -0.435769 0.391319) + (xy -0.476647 0.422275) + (xy -0.558006 0.432594) + (xy -0.638572 0.421878) + (xy -0.680244 0.389731) + (xy -0.693737 0.348456) + (xy -0.696119 0.292894) + (xy -0.696119 -0.656431) + (xy -0.693737 -0.7112) + (xy -0.680244 -0.751681) + (xy -0.638175 -0.783828) + (xy -0.556419 -0.794544) + (xy -0.47625 -0.783828) + (xy -0.435769 -0.751681) + (xy -0.420687 -0.709613) + (xy -0.418306 -0.654844) + (xy -0.418306 -0.304006) + (xy -0.332184 -0.376634) + (xy -0.232569 -0.400844) + (xy -0.132644 -0.387438) + (xy -0.044538 -0.347222) + (xy 0.03175 -0.280194) + (xy 0.090399 -0.193763) + (xy 0.125589 -0.095338) + (xy 0.137319 0.015081) + (xy 0.137319 0.294481) + (xy 0.134938 0.34925) + (xy 0.119856 0.391319) + (xy 0.078978 0.422275) + (xy -0.002381 0.432594) + (xy -0.002381 1.125273) + (xy 0.402431 1.125273) + (xy 0.402431 0.432594) + (xy 0.292894 0.405606) + (xy 0.264319 0.337344) + (xy 0.264319 0.291306) + (xy 0.264319 -0.265906) + (xy 0.2667 -0.320675) + (xy 0.280194 -0.361156) + (xy 0.322263 -0.393303) + (xy 0.404019 -0.404019) + (xy 0.481409 -0.394891) + (xy 0.523081 -0.367506) + (xy 0.540544 -0.315119) + (xy 0.563563 -0.342106) + (xy 0.627856 -0.384969) + (xy 0.714375 -0.411956) + (xy 0.777081 -0.407988) + (xy 0.832644 -0.394494) + (xy 0.88265 -0.36195) + (xy 0.902494 -0.288131) + (xy 0.872331 -0.177006) + (xy 0.785019 -0.116681) + (xy 0.73025 -0.129381) + (xy 0.661194 -0.142081) + (xy 0.581025 -0.111919) + (xy 0.543719 -0.038894) + (xy 0.543719 0.294481) + (xy 0.541338 0.34925) + (xy 0.526256 0.391319) + (xy 0.483394 0.422275) + (xy 0.402431 0.432594) + (xy 0.402431 1.125273) + (xy 1.684338 1.125273) + (xy 1.684338 0.429419) + (xy 1.56845 0.407987) + (xy 1.534319 0.345281) + (xy 1.455936 0.408384) + (xy 1.338263 0.429419) + (xy 1.248922 0.415484) + (xy 1.16399 0.37368) + (xy 1.083469 0.304006) + (xy 1.018205 0.2159) + (xy 0.979047 0.118798) + (xy 0.965994 0.0127) + (xy 0.979135 -0.09331) + (xy 1.018558 -0.190147) + (xy 1.084263 -0.277813) + (xy 1.165666 -0.347045) + (xy 1.252185 -0.388585) + (xy 1.343819 -0.402431) + (xy 1.442244 -0.383381) + (xy 1.504156 -0.347663) + (xy 1.532731 -0.315119) + (xy 1.568847 -0.381794) + (xy 1.658144 -0.404019) + (xy 1.750219 -0.394494) + (xy 1.792288 -0.361156) + (xy 1.806575 -0.319088) + (xy 1.808956 -0.264319) + (xy 1.808956 0.291306) + (xy 1.806575 0.346075) + (xy 1.793081 0.388144) + (xy 1.754783 0.4191) + (xy 1.684338 0.429419) + (xy 1.684338 1.125273) + (xy 2.324894 1.125273) + (xy 2.324894 0.792956) + (xy 2.207022 0.778272) + (xy 2.094706 0.734219) + (xy 2.012553 0.678259) + (xy 1.985169 0.627856) + (xy 2.032794 0.518319) + (xy 2.079625 0.472281) + (xy 2.118519 0.459581) + (xy 2.164556 0.478631) + (xy 2.243931 0.522684) + (xy 2.329656 0.537369) + (xy 2.428081 0.489744) + (xy 2.466181 0.375444) + (xy 2.466181 0.327819) + (xy 2.387997 0.38735) + (xy 2.274094 0.407194) + (xy 2.188104 0.3937) + (xy 2.105819 0.353219) + (xy 2.027238 0.28575) + (xy 1.963297 0.20029) + (xy 1.924932 0.105833) + (xy 1.912144 0.002381) + (xy 1.92502 -0.101159) + (xy 1.963649 -0.19588) + (xy 2.028031 -0.281781) + (xy 2.107759 -0.349691) + (xy 2.192426 -0.390437) + (xy 2.282031 -0.404019) + (xy 2.380456 -0.384175) + (xy 2.441575 -0.347663) + (xy 2.467769 -0.316706) + (xy 2.500313 -0.384175) + (xy 2.590006 -0.407194) + (xy 2.680494 -0.397669) + (xy 2.720975 -0.365125) + (xy 2.735263 -0.324644) + (xy 2.737644 -0.270669) + (xy 2.737644 0.386556) + (xy 2.723533 0.500415) + (xy 2.681199 0.598576) + (xy 2.610644 0.681038) + (xy 2.522449 0.743215) + (xy 2.427199 0.780521) + (xy 2.324894 0.792956) + (xy 2.324894 1.125273) + (xy 3.948906 1.125273) + (xy 3.948906 0.432594) + (xy 3.868341 0.421481) + (xy 3.826669 0.388144) + (xy 3.813175 0.346075) + (xy 3.810794 0.291306) + (xy 3.810794 0.013494) + (xy 3.786188 -0.090091) + (xy 3.712369 -0.124619) + (xy 3.636963 -0.088106) + (xy 3.617119 0.015081) + (xy 3.617119 0.292894) + (xy 3.614738 0.348456) + (xy 3.599656 0.389731) + (xy 3.557588 0.421878) + (xy 3.475831 0.432594) + (xy 3.395266 0.421481) + (xy 3.353594 0.388144) + (xy 3.3401 0.346075) + (xy 3.337719 0.291306) + (xy 3.337719 0.013494) + (xy 3.313113 -0.090091) + (xy 3.239294 -0.124619) + (xy 3.167856 -0.090091) + (xy 3.144044 0.013494) + (xy 3.144044 0.294481) + (xy 3.141663 0.34925) + (xy 3.126581 0.391319) + (xy 3.083719 0.422275) + (xy 3.002756 0.432594) + (xy 2.922191 0.421878) + (xy 2.880519 0.389731) + (xy 2.867025 0.348456) + (xy 2.864644 0.292894) + (xy 2.864644 -0.265906) + (xy 2.867025 -0.320675) + (xy 2.882106 -0.361156) + (xy 2.922191 -0.393303) + (xy 2.994819 -0.404019) + (xy 3.110706 -0.375444) + (xy 3.137694 -0.292894) + (xy 3.219847 -0.377428) + (xy 3.317081 -0.405606) + (xy 3.415859 -0.39026) + (xy 3.496292 -0.344223) + (xy 3.558381 -0.267494) + (xy 3.60045 -0.3175) + (xy 3.679031 -0.37465) + (xy 3.790156 -0.405606) + (xy 3.906838 -0.381198) + (xy 4.002881 -0.307975) + (xy 4.050506 -0.228688) + (xy 4.079081 -0.121003) + (xy 4.088606 0.015081) + (xy 4.088606 0.292894) + (xy 4.086225 0.347663) + (xy 4.071144 0.389731) + (xy 4.030266 0.421878) + (xy 3.948906 0.432594) + (xy 3.948906 1.125273) + (xy 4.088606 1.125273) + (xy 4.220898 1.125273) + (xy 4.331194 1.119854) + (xy 4.440428 1.103651) + (xy 4.547547 1.076819) + (xy 4.651521 1.039617) + (xy 4.751348 0.992402) + (xy 4.846066 0.93563) + (xy 4.934763 0.869848) + (xy 5.016586 0.795688) + (xy 5.090746 0.713866) + (xy 5.156528 0.625168) + (xy 5.2133 0.53045) + (xy 5.260514 0.430623) + (xy 5.297717 0.326649) + (xy 5.324549 0.21953) + (xy 5.340752 0.110296) + (xy 5.346171 0) + (xy 5.340752 -0.110296) + (xy 5.324549 -0.21953) + (xy 5.297717 -0.326649) + (xy 5.260514 -0.430623) + (xy 5.2133 -0.53045) + (xy 5.156528 -0.625168) + (xy 5.090746 -0.713866) + (xy 5.016586 -0.795688) + (xy 4.934763 -0.869848) + (xy 4.846066 -0.93563) + (xy 4.751348 -0.992402) + (xy 4.651521 -1.039617) + (xy 4.547547 -1.076819) + (xy 4.440428 -1.103651) + (xy 4.331194 -1.119854) + (xy 4.220898 -1.125273) + (xy 4.088606 -1.125273) + (xy -4.088606 -1.125273) + ) + + (stroke (width 0) (type solid)) (fill solid) (layer "F.SilkS") (tstamp 097a31cc-bd76-4ba1-b1cd-14b7a6e1c506)) + ) + + (footprint "Capacitor_SMD:CP_Elec_8x10.5" (layer "F.Cu") + (tstamp 9032aea2-737d-4faa-98c2-bec878ba14ae) + (at 151.765 88.646) + (descr "SMD capacitor, aluminum electrolytic, Vishay 0810, 8.0x10.5mm, http://www.vishay.com/docs/28395/150crz.pdf") + (tags "capacitor electrolytic") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Polarized capacitor, small symbol") + (property "ki_keywords" "cap capacitor") + (path "/22ab305b-fc07-4a33-bc21-ca654c377890") + (attr smd) + (fp_text reference "C7" (at -7.239 0.127 180) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 971d3190-29f9-427c-bd05-f9f2ef91c44d) + ) + (fp_text value "47uF" (at 0 5.3) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 0478858f-8978-427a-862a-5307317672ca) + ) + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 8c43472e-8437-4dd8-87cb-b1a98a23533c) + ) + (fp_line (start -5.6 -2.51) (end -4.6 -2.51) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp f79e8fb6-5a1b-4f61-bba7-851644b4374b)) + (fp_line (start -5.1 -3.01) (end -5.1 -2.01) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 9029a263-1fc8-457e-9d3a-e95c2c2b7cf1)) + (fp_line (start -4.36 -3.295563) (end -4.36 -1.51) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp ee1518cf-54e6-4134-9750-f37d7ee8dae8)) + (fp_line (start -4.36 -3.295563) (end -3.295563 -4.36) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 92111cfa-e15d-4f1f-9883-657b3856de1d)) + (fp_line (start -4.36 3.295563) (end -4.36 1.51) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp ab968030-5668-41e4-b0ba-f2468b97f316)) + (fp_line (start -4.36 3.295563) (end -3.295563 4.36) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 0b1149ea-009e-4b61-83bb-13b4799b0ae4)) + (fp_line (start -3.295563 -4.36) (end 4.36 -4.36) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 4ec30b39-e928-49f8-a822-8f2ba9d6cf9e)) + (fp_line (start -3.295563 4.36) (end 4.36 4.36) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 552779ac-5001-4551-8c2b-dcca755d5e80)) + (fp_line (start 4.36 -4.36) (end 4.36 -1.51) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp ad9da22a-6ca4-4ee5-a71a-c83b17d42d7e)) + (fp_line (start 4.36 4.36) (end 4.36 1.51) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp ea9649c3-f3f3-469e-adb4-f5fd92fe556c)) + (fp_line (start -6.15 -1.5) (end -6.15 1.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 7a02cbb2-8653-4a1e-b2ea-248af38acb12)) + (fp_line (start -6.15 1.5) (end -4.5 1.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 5ae9af17-0da6-424c-99ac-9815ae35c3b0)) + (fp_line (start -4.5 -3.35) (end -4.5 -1.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp ef1a93f4-db01-40fc-9123-a24d8072b8b8)) + (fp_line (start -4.5 -3.35) (end -3.35 -4.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp a9633083-e618-42d5-bf2b-6b623741cbd0)) + (fp_line (start -4.5 -1.5) (end -6.15 -1.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 8c3435f8-d771-4b03-a5cc-f6f73fb5d23d)) + (fp_line (start -4.5 1.5) (end -4.5 3.35) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp bfb74858-d0d6-41cc-ad72-978504da920b)) + (fp_line (start -4.5 3.35) (end -3.35 4.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 55afe23e-dde7-485c-be4e-db1a800eebc4)) + (fp_line (start -3.35 -4.5) (end 4.5 -4.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp abd4e9d6-33a2-4bd7-885f-12693a94fe13)) + (fp_line (start -3.35 4.5) (end 4.5 4.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp bd9f3c07-54f1-4bb3-9071-08a74b4a69fa)) + (fp_line (start 4.5 -4.5) (end 4.5 -1.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 280003da-f47a-40f8-8c5d-8d78fedb98c0)) + (fp_line (start 4.5 -1.5) (end 6.15 -1.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp b7ce32df-cd4a-43eb-b1fe-97ce054afb63)) + (fp_line (start 4.5 1.5) (end 4.5 4.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp b5aed358-1295-4104-8bd3-a9f0f0db9a4f)) + (fp_line (start 6.15 -1.5) (end 6.15 1.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 69a3deee-54d1-4303-90bf-10d95e8c6656)) + (fp_line (start 6.15 1.5) (end 4.5 1.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp af7383c9-3bb6-44d0-bfe1-dfc3e920c920)) + (fp_line (start -4.25 -3.25) (end -4.25 3.25) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 77fb78f6-ada6-4fb4-a163-e6599e3230f9)) + (fp_line (start -4.25 -3.25) (end -3.25 -4.25) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 8f4d551e-655f-4016-a767-60fd5e3d1f9b)) + (fp_line (start -4.25 3.25) (end -3.25 4.25) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 6313a6f0-c970-4ed1-b736-5389c1c7dca5)) + (fp_line (start -3.562278 -1.5) (end -2.762278 -1.5) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 62422789-7b00-4218-8445-e1b65a4995f5)) + (fp_line (start -3.25 -4.25) (end 4.25 -4.25) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp d3e16173-1192-4d1a-9f20-4d1feaaadc73)) + (fp_line (start -3.25 4.25) (end 4.25 4.25) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp aad824d9-f088-4b10-9620-6e919093ac2c)) + (fp_line (start -3.162278 -1.9) (end -3.162278 -1.1) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp adfdd702-a6e9-428d-9ce9-05c2719507aa)) + (fp_line (start 4.25 -4.25) (end 4.25 4.25) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp cfc34690-668b-4b5f-9195-d580583432ab)) + (fp_circle (center 0 0) (end 4 0) + (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 488f829f-e959-4929-b543-aac919127a8b)) + (pad "1" smd roundrect (at -3.7 0) (size 4.4 2.5) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.1) + (net 7 "GNDA") (pintype "passive") (tstamp d35ecacc-b903-456e-ac0a-66978a176ecf)) + (pad "2" smd roundrect (at 3.7 0) (size 4.4 2.5) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.1) + (net 37 "GNDREF") (pintype "passive") (tstamp d3abb65a-b0e9-4427-b799-0cc4ceec8917)) + (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/CP_Elec_8x10.5.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Resistor_SMD:R_0805_2012Metric" (layer "F.Cu") + (tstamp 964c0eb2-f3ff-403f-9479-06f5a23443ce) + (at 140.335 73.66) + (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Resistor, small symbol") + (property "ki_keywords" "R resistor") + (path "/26baa036-a762-406a-9b23-5827823cc356") + (attr smd) + (fp_text reference "R107" (at 0 -1.65) (layer "F.SilkS") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp c363f4aa-0a7e-4261-ab04-cb1d017b020e) + ) + (fp_text value "100M" (at 0 1.65) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 38158458-d167-4dac-a47e-d0553bec3395) + ) + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.08))) + (tstamp a9efa6f2-a374-45b6-9ff7-f602cc9f79fe) + ) + (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp f9133824-2c46-4cc9-84f7-c87a826ab5c1)) + (fp_line (start -0.227064 0.735) (end 0.227064 0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 7ba66cf7-1651-4389-9dfb-3a6431a722b8)) + (fp_line (start -1.68 -0.95) (end 1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 41915ce4-66e4-4ff1-84e6-a8fb13930aaa)) + (fp_line (start -1.68 0.95) (end -1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp cb6665c0-9db1-493c-93a3-53783a344ca3)) + (fp_line (start 1.68 -0.95) (end 1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp e549d43e-2797-442a-a51f-9c9f22ec2170)) + (fp_line (start 1.68 0.95) (end -1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp b1b8968f-3fbf-4a22-b2c1-5ec9e1fee42a)) + (fp_line (start -1 -0.625) (end 1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp a2f04275-1ad2-435a-8720-64e451a35de0)) + (fp_line (start -1 0.625) (end -1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 05797e48-5d94-4ed7-affc-c485df888edd)) + (fp_line (start 1 -0.625) (end 1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp c53c032e-90dd-4ede-aaa9-cce0096666ff)) + (fp_line (start 1 0.625) (end -1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp da373dfe-d384-45af-b58f-757c40f9130a)) + (pad "1" smd roundrect (at -0.9125 0) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 33 "Net-(R106-Pad2)") (pintype "passive") (tstamp bb2aa51f-715c-49d4-bc0d-acddd528d8d6)) + (pad "2" smd roundrect (at 0.9125 0) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 34 "Net-(R107-Pad2)") (pintype "passive") (tstamp 00661751-a74d-44f9-87a1-ddee7c81ecdb)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Resistor_SMD:R_0805_2012Metric" (layer "F.Cu") + (tstamp 9861c807-95b0-49fc-bcb0-c4e70a403cbe) + (at 157.9645 120.3725 -90) + (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Resistor, small symbol") + (property "ki_keywords" "R resistor") + (path "/4d033654-2eb3-4606-a665-80d7a96d3d5e") + (attr smd) + (fp_text reference "R1" (at 0.0235 -1.8015 -180) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp f314ca04-c545-4114-a8a2-24db45fa6831) + ) + (fp_text value "47" (at 0 1.65 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 1a328f63-2e07-4f0d-b038-15de6a948bfa) + ) + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.08))) + (tstamp 00aa6def-0026-4a42-bf9e-b6dc8a453e86) + ) + (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp d4e5f6b8-9262-4997-aeb2-b87bd65780a1)) + (fp_line (start -0.227064 0.735) (end 0.227064 0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp a48213c2-4ded-4aa4-aa88-eeab138f2e36)) + (fp_line (start -1.68 -0.95) (end 1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 7473ba43-cf3e-4ef3-bfd0-4283045e5edb)) + (fp_line (start -1.68 0.95) (end -1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp ac0fbc19-7061-4485-b207-60f04ad9b0d3)) + (fp_line (start 1.68 -0.95) (end 1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 6ef56f84-711e-4822-857b-e90e0b126685)) + (fp_line (start 1.68 0.95) (end -1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp a64d8863-d082-43b2-9952-0f9588478308)) + (fp_line (start -1 -0.625) (end 1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp bb3af65d-bd4e-4f9c-a2c4-1264c6a553f5)) + (fp_line (start -1 0.625) (end -1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp b9b388f9-5488-43cf-a283-1038f28e17d7)) + (fp_line (start 1 -0.625) (end 1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp c2a8274e-d065-4ac4-889b-44467f4d6e61)) + (fp_line (start 1 0.625) (end -1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp bc47142a-d628-4dce-b632-9e20475f58cf)) + (pad "1" smd roundrect (at -0.9125 0 270) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 1 "Net-(C1-Pad1)") (pintype "passive") (tstamp 0b170709-f334-4559-8c6e-629824016a8b)) + (pad "2" smd roundrect (at 0.9125 0 270) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 25 "Net-(C91-Pad1)") (pintype "passive") (tstamp bbb5f9a0-014a-4e1c-8bf0-5a2528063153)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Diode_SMD:D_SOD-323_HandSoldering" (layer "F.Cu") + (tstamp a02aa633-8645-4dd8-8172-51c5b017de71) + (at 163.068 64.916) + (descr "SOD-323") + (tags "SOD-323") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "Sim.Device" "D") + (property "Sim.Pins" "1=K 2=A") + (property "ki_description" "75V 0.15A Fast switching Diode, SOD-323") + (property "ki_keywords" "diode") + (path "/e65f4c65-c065-41e4-8e1a-6b16d243b987") + (attr smd) + (fp_text reference "D7" (at 5.207 -1.778) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 5381e483-ef52-4492-869a-4121ee714074) + ) + (fp_text value "1N4148WS" (at 0.1 1.9) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 35a11eac-6de0-4f78-b3bf-091902ab4f50) + ) + (fp_text user "${REFERENCE}" (at 0 -1.85) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 4f7feb7a-86fe-4af0-b758-2f7298e7dae3) + ) + (fp_line (start -2.01 -0.85) (end -2.01 0.85) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp db5391d7-4a29-4901-8660-df705701665a)) + (fp_line (start -2.01 -0.85) (end 1.25 -0.85) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp d39c6b3a-c2ab-4354-8b2c-70ca3ef646da)) + (fp_line (start -2.01 0.85) (end 1.25 0.85) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp f56bd81f-dbb7-4c5e-82ec-2456aa2646f1)) + (fp_line (start -2 -0.95) (end -2 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 92fe1d7c-489d-45cb-ae47-22e0e5476847)) + (fp_line (start -2 -0.95) (end 2 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp d2b70a41-c4be-46d8-bf30-5b1ef75255ba)) + (fp_line (start -2 0.95) (end 2 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 56380fcf-6538-498d-b6e5-01d49f50462c)) + (fp_line (start 2 -0.95) (end 2 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp e51db2a7-809e-4183-bc6a-e17f66ce846e)) + (fp_line (start -0.9 -0.7) (end 0.9 -0.7) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 321633e8-e846-4537-9ea2-47b64ccea23b)) + (fp_line (start -0.9 0.7) (end -0.9 -0.7) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 974a8524-cb8a-444c-9071-52e8f3258531)) + (fp_line (start -0.3 -0.35) (end -0.3 0.35) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 214c1b9a-4cae-4457-8160-7ef1969bffd9)) + (fp_line (start -0.3 0) (end -0.5 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp a8aeef17-e804-4ddd-b758-575ae7282c8b)) + (fp_line (start -0.3 0) (end 0.2 -0.35) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 48ea3efb-6078-4b74-b939-537baceff2a3)) + (fp_line (start 0.2 -0.35) (end 0.2 0.35) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 7712f41f-284f-4469-bebf-92d854b3e3af)) + (fp_line (start 0.2 0) (end 0.45 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 160a803f-6e32-4bad-9c41-0ecb429222c2)) + (fp_line (start 0.2 0.35) (end -0.3 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 7338bc3a-b7fd-4edb-b13b-ad4c81415583)) + (fp_line (start 0.9 -0.7) (end 0.9 0.7) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp c1c84a7e-697c-4663-a448-26bc8293711a)) + (fp_line (start 0.9 0.7) (end -0.9 0.7) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp c4a34b10-d306-4f8b-b86c-cb289e561687)) + (pad "1" smd roundrect (at -1.25 0) (size 1 1) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 20 "Net-(D7-K)") (pinfunction "K") (pintype "passive") (tstamp a7d9a2e3-ab09-4473-b691-74e73a3ea6d0)) + (pad "2" smd roundrect (at 1.25 0) (size 1 1) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 18 "Net-(D6-K)") (pinfunction "A") (pintype "passive") (tstamp 3cc8e8a1-5e39-44e7-b326-4947aa2ced8b)) + (model "${KICAD6_3DMODEL_DIR}/Diode_SMD.3dshapes/D_SOD-323.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "kibuzzard-640955F0" (layer "F.Cu") + (tstamp a6db2ff0-90eb-4b54-a6fe-0134a7ec6822) + (at 147.574 125.857) + (descr "Generated with KiBuzzard") + (tags "kb_params=eyJBbGlnbm1lbnRDaG9pY2UiOiAiQ2VudGVyIiwgIkNhcExlZnRDaG9pY2UiOiAiKCIsICJDYXBSaWdodENob2ljZSI6ICIpIiwgIkZvbnRDb21ib0JveCI6ICJGcmVkb2thT25lIiwgIkhlaWdodEN0cmwiOiAiMSIsICJMYXllckNvbWJvQm94IjogIkYuU2lsa1MiLCAiTXVsdGlMaW5lVGV4dCI6ICJHLzFcclxuIiwgIlBhZGRpbmdCb3R0b21DdHJsIjogIjUiLCAiUGFkZGluZ0xlZnRDdHJsIjogIjIiLCAiUGFkZGluZ1JpZ2h0Q3RybCI6ICIyIiwgIlBhZGRpbmdUb3BDdHJsIjogIjUiLCAiV2lkdGhDdHJsIjogIiJ9") + (attr board_only exclude_from_pos_files exclude_from_bom) + (fp_text reference "kibuzzard-640955F0" (at 0 -4.043892) (layer "F.SilkS") hide + (effects (font (size 0 0) (thickness 0.15))) + (tstamp 5796ad2c-52ce-483a-969d-7c561ee693f4) + ) + (fp_text value "G***" (at 0 4.043892) (layer "F.SilkS") hide + (effects (font (size 0 0) (thickness 0.15))) + (tstamp 76300ca9-c5a5-4b33-92ee-735914f6ed10) + ) + (fp_poly + (pts + (xy -1.255712 -0.995892) + (xy -1.388004 -0.995892) + (xy -1.485619 -0.991096) + (xy -1.582293 -0.976756) + (xy -1.677096 -0.953009) + (xy -1.769115 -0.920084) + (xy -1.857464 -0.878298) + (xy -1.941292 -0.828054) + (xy -2.019791 -0.769835) + (xy -2.092206 -0.704202) + (xy -2.157839 -0.631787) + (xy -2.216058 -0.553288) + (xy -2.266302 -0.46946) + (xy -2.308088 -0.381111) + (xy -2.341013 -0.289092) + (xy -2.36476 -0.194289) + (xy -2.3791 -0.097614) + (xy -2.383896 0) + (xy -2.3791 0.097614) + (xy -2.36476 0.194289) + (xy -2.341013 0.289092) + (xy -2.308088 0.381111) + (xy -2.266302 0.46946) + (xy -2.216058 0.553288) + (xy -2.157839 0.631787) + (xy -2.092206 0.704202) + (xy -2.019791 0.769835) + (xy -1.941292 0.828054) + (xy -1.857464 0.878298) + (xy -1.769115 0.920084) + (xy -1.677096 0.953009) + (xy -1.582293 0.976756) + (xy -1.485619 0.991096) + (xy -1.388004 0.995892) + (xy -1.255712 0.995892) + (xy -0.669925 0.995892) + (xy -0.669925 0.592137) + (xy -0.784324 0.580975) + (xy -0.890984 0.547489) + (xy -0.989905 0.491679) + (xy -1.081087 0.413544) + (xy -1.157486 0.319633) + (xy -1.212056 0.216495) + (xy -1.244798 0.10413) + (xy -1.255712 -0.017463) + (xy -1.2446 -0.13846) + (xy -1.211262 -0.249039) + (xy -1.1557 -0.3492) + (xy -1.077912 -0.438944) + (xy -0.985044 -0.512911) + (xy -0.884237 -0.565745) + (xy -0.775494 -0.597446) + (xy -0.658812 -0.608013) + (xy -0.536222 -0.594254) + (xy -0.418218 -0.552979) + (xy -0.3048 -0.484188) + (xy -0.261937 -0.413544) + (xy -0.29845 -0.32385) + (xy -0.357584 -0.260747) + (xy -0.411162 -0.239713) + (xy -0.508 -0.283369) + (xy -0.581025 -0.316111) + (xy -0.66675 -0.327025) + (xy -0.780653 -0.305792) + (xy -0.881062 -0.242094) + (xy -0.951309 -0.144066) + (xy -0.974725 -0.019844) + (xy -0.964142 0.067116) + (xy -0.932392 0.144903) + (xy -0.879475 0.213519) + (xy -0.777875 0.285552) + (xy -0.663575 0.309562) + (xy -0.580628 0.302419) + (xy -0.506412 0.280988) + (xy -0.506412 0.10795) + (xy -0.631825 0.10795) + (xy -0.701675 0.09525) + (xy -0.728662 0.057944) + (xy -0.735012 -0.008731) + (xy -0.727869 -0.0762) + (xy -0.701675 -0.111125) + (xy -0.625475 -0.125413) + (xy -0.346075 -0.125413) + (xy -0.2413 -0.080963) + (xy -0.225425 0.007937) + (xy -0.225425 0.357187) + (xy -0.269875 0.454025) + (xy -0.344884 0.514449) + (xy -0.436562 0.557609) + (xy -0.544909 0.583505) + (xy -0.669925 0.592137) + (xy -0.669925 0.995892) + (xy 0.030163 0.995892) + (xy 0.030163 0.665163) + (xy -0.049212 0.64135) + (xy -0.119856 0.599281) + (xy -0.138112 0.5588) + (xy -0.119062 0.479425) + (xy 0.392113 -0.588963) + (xy 0.446088 -0.658813) + (xy 0.483394 -0.665163) + (xy 0.563563 -0.639763) + (xy 0.627856 -0.596503) + (xy 0.649288 -0.549275) + (xy 0.627063 -0.4699) + (xy 0.117475 0.588963) + (xy 0.097631 0.62865) + (xy 0.073819 0.653256) + (xy 0.030163 0.665163) + (xy 0.030163 0.995892) + (xy 1.114425 0.995892) + (xy 1.114425 0.579437) + (xy 1.034653 0.569119) + (xy 0.992188 0.538163) + (xy 0.977106 0.494506) + (xy 0.974725 0.436562) + (xy 0.974725 -0.130175) + (xy 0.954088 -0.111125) + (xy 0.842963 -0.061912) + (xy 0.746919 -0.117475) + (xy 0.696913 -0.2159) + (xy 0.754063 -0.309562) + (xy 1.014413 -0.544513) + (xy 1.019175 -0.547688) + (xy 1.108869 -0.588963) + (xy 1.184275 -0.581025) + (xy 1.22555 -0.562769) + (xy 1.247775 -0.528638) + (xy 1.255713 -0.4445) + (xy 1.255713 0.439738) + (xy 1.253331 0.494506) + (xy 1.23825 0.536575) + (xy 1.196181 0.568722) + (xy 1.114425 0.579437) + (xy 1.114425 0.995892) + (xy 1.255713 0.995892) + (xy 1.388004 0.995892) + (xy 1.485619 0.991096) + (xy 1.582293 0.976756) + (xy 1.677096 0.953009) + (xy 1.769115 0.920084) + (xy 1.857464 0.878298) + (xy 1.941292 0.828054) + (xy 2.019791 0.769835) + (xy 2.092206 0.704202) + (xy 2.157839 0.631787) + (xy 2.216058 0.553288) + (xy 2.266302 0.46946) + (xy 2.308088 0.381111) + (xy 2.341013 0.289092) + (xy 2.36476 0.194289) + (xy 2.3791 0.097614) + (xy 2.383896 0) + (xy 2.3791 -0.097614) + (xy 2.36476 -0.194289) + (xy 2.341013 -0.289092) + (xy 2.308088 -0.381111) + (xy 2.266302 -0.46946) + (xy 2.216058 -0.553288) + (xy 2.157839 -0.631787) + (xy 2.092206 -0.704202) + (xy 2.019791 -0.769835) + (xy 1.941292 -0.828054) + (xy 1.857464 -0.878298) + (xy 1.769115 -0.920084) + (xy 1.677096 -0.953009) + (xy 1.582293 -0.976756) + (xy 1.485619 -0.991096) + (xy 1.388004 -0.995892) + (xy 1.255713 -0.995892) + (xy -1.255712 -0.995892) + ) + + (stroke (width 0) (type solid)) (fill solid) (layer "F.SilkS") (tstamp 2a29ffeb-c27e-4eeb-a8ae-519c7cba0784)) + ) + + (footprint "Capacitor_SMD:C_0805_2012Metric" (layer "F.Cu") + (tstamp a8669b0d-2394-431e-90f5-2e6dac3ec692) + (at 157.4311 79.0486 180) + (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") + (tags "capacitor") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Unpolarized capacitor, small symbol") + (property "ki_keywords" "capacitor cap") + (path "/7b77ebe3-7174-4577-b649-2c64bc1ec7f2") + (attr smd) + (fp_text reference "C9" (at 1.4751 -1.6154) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 727a6922-b9df-4666-89a2-13f8f3d3951c) + ) + (fp_text value "1nF 100V" (at 0 1.68) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp a0d91ac3-0e3f-4c8d-a319-832bb8555667) + ) + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.08))) + (tstamp 0559b746-f6ce-4001-979e-52d3a3fa47c7) + ) + (fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 0e28b11c-0bfa-49cf-9355-1daf89a79803)) + (fp_line (start -0.261252 0.735) (end 0.261252 0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp e5d59024-2332-4153-a04d-f5300dd2e4c7)) + (fp_line (start -1.7 -0.98) (end 1.7 -0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 5621642c-0a19-47ad-8b5e-8f29fcbbce22)) + (fp_line (start -1.7 0.98) (end -1.7 -0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp abdf6b75-5cb4-4b55-b504-c63de88c055f)) + (fp_line (start 1.7 -0.98) (end 1.7 0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp adcd34ad-18a7-443d-91f4-a9bce21aa837)) + (fp_line (start 1.7 0.98) (end -1.7 0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 3a53c915-0523-431f-9f72-fd7d11b6d5be)) + (fp_line (start -1 -0.625) (end 1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp ac8d88b4-a055-4187-a9cb-11d9c8260942)) + (fp_line (start -1 0.625) (end -1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp be13de9e-c77e-446d-8d85-7117390b9f8d)) + (fp_line (start 1 -0.625) (end 1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 6dd25714-7457-4a10-84f2-0481f5bdf64d)) + (fp_line (start 1 0.625) (end -1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 16b9d915-7b47-4f19-8ac1-9844861a208a)) + (pad "1" smd roundrect (at -0.95 0 180) (size 1 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 37 "GNDREF") (pintype "passive") (tstamp 8b3705e6-0486-4747-85f1-a635cecc87f8)) + (pad "2" smd roundrect (at 0.95 0 180) (size 1 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 8 "Net-(C9-Pad2)") (pintype "passive") (tstamp 5bc60657-8a6e-48f1-81b9-2291f32d3274)) + (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Diode_SMD:D_SOD-323_HandSoldering" (layer "F.Cu") + (tstamp ada3ff1b-5154-4604-9d62-3a71045e6cf8) + (at 158.5995 81.934 180) + (descr "SOD-323") + (tags "SOD-323") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "Sim.Device" "D") + (property "Sim.Pins" "1=K 2=A") + (property "ki_description" "75V 0.15A Fast switching Diode, SOD-323") + (property "ki_keywords" "diode") + (path "/79fe7025-8213-4929-93ef-ee329b1fceea") + (attr smd) + (fp_text reference "D2" (at 0 -1.85) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 46097b5f-5bf8-48d7-9eb0-9366d1a0baba) + ) + (fp_text value "1N4148WS" (at 0.1 1.9) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 6dfb3997-eaeb-43a3-99d9-2eed9a108989) + ) + (fp_text user "${REFERENCE}" (at 0 -1.85) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 7f071464-5e42-4149-bd88-06db178e7cd4) + ) + (fp_line (start -2.01 -0.85) (end -2.01 0.85) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp a1996d41-e0d3-45ea-817a-7de806338375)) + (fp_line (start -2.01 -0.85) (end 1.25 -0.85) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp fe268bf0-74e5-408f-9454-2d863293a358)) + (fp_line (start -2.01 0.85) (end 1.25 0.85) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp cd1efb02-6249-41a7-b735-22e3fcb14d8b)) + (fp_line (start -2 -0.95) (end -2 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 3d5e55e9-8d6f-4d21-9f87-80bb24d9e3f0)) + (fp_line (start -2 -0.95) (end 2 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 5ae43992-2024-49dc-89b4-31b13f683f80)) + (fp_line (start -2 0.95) (end 2 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp ab9bdc9d-54a3-4676-aec1-989510a0fe9c)) + (fp_line (start 2 -0.95) (end 2 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 862e9710-92fc-41c5-afbb-e47d72d3e906)) + (fp_line (start -0.9 -0.7) (end 0.9 -0.7) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp b5bdf46c-e264-45e3-b69e-f1cf572d5273)) + (fp_line (start -0.9 0.7) (end -0.9 -0.7) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 7683779c-ba94-4ff3-a685-bac4e2c823b9)) + (fp_line (start -0.3 -0.35) (end -0.3 0.35) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp aaeb3ace-a497-4b13-99b9-ee0d20c3a430)) + (fp_line (start -0.3 0) (end -0.5 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 834c6466-37d7-429a-9745-7f551b1d88c2)) + (fp_line (start -0.3 0) (end 0.2 -0.35) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 03be182d-bedf-425c-952e-d7885c7ccbfc)) + (fp_line (start 0.2 -0.35) (end 0.2 0.35) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 33e89a47-ccd4-48d5-a482-48df0c272414)) + (fp_line (start 0.2 0) (end 0.45 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 30d6f6d6-b90f-48fa-a228-644638bce641)) + (fp_line (start 0.2 0.35) (end -0.3 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp aac1a8ed-042b-43e1-b106-e099a7778765)) + (fp_line (start 0.9 -0.7) (end 0.9 0.7) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 580c8363-7609-4ddd-b21b-bbe75ceabc73)) + (fp_line (start 0.9 0.7) (end -0.9 0.7) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 1a27379d-134e-4c4f-a575-ad658da09d0f)) + (pad "1" smd roundrect (at -1.25 0 180) (size 1 1) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 10 "Net-(D2-K)") (pinfunction "K") (pintype "passive") (tstamp f134f9bc-e3c6-4b81-9f75-9b7e3a7d2ef0)) + (pad "2" smd roundrect (at 1.25 0 180) (size 1 1) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 5 "+12V") (pinfunction "A") (pintype "passive") (tstamp 4ba12afe-72bb-42c6-9edb-8b58e1243590)) + (model "${KICAD6_3DMODEL_DIR}/Diode_SMD.3dshapes/D_SOD-323.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Resistor_SMD:R_0805_2012Metric" (layer "F.Cu") + (tstamp ae9d5b0c-e1c3-489f-bd0f-ba9aca887846) + (at 154.559 56.388 180) + (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Resistor, small symbol") + (property "ki_keywords" "R resistor") + (path "/21bed07d-9edf-4998-9423-df635e2e6817") + (attr smd) + (fp_text reference "R13" (at -1.016 -1.778) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 98560b8c-a32a-4612-bf28-ecde8e98b110) + ) + (fp_text value "100M" (at 0 1.65) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 51418b85-0800-437a-b65f-9fb63e7cf123) + ) + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.08))) + (tstamp 74b3e60e-e2e1-4759-9c65-3367ecdb369d) + ) + (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp aa84edb9-979a-476c-b4dd-7f101e8a5150)) + (fp_line (start -0.227064 0.735) (end 0.227064 0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 583e5a2e-3c34-4b91-b44f-d2e6202a3824)) + (fp_line (start -1.68 -0.95) (end 1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp e18e531c-41da-4a23-9e93-28b4442ede8f)) + (fp_line (start -1.68 0.95) (end -1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 5d31103f-e76c-449b-9ba6-45a423d64e53)) + (fp_line (start 1.68 -0.95) (end 1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 0c683719-2ddc-49c0-a13f-47919076e910)) + (fp_line (start 1.68 0.95) (end -1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp c79da080-346b-449c-82df-9e34fc247255)) + (fp_line (start -1 -0.625) (end 1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 35d9ee34-7928-485f-ba65-118ce85aee27)) + (fp_line (start -1 0.625) (end -1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 3cb3b1d0-bde9-4b96-874d-a2c2d376035a)) + (fp_line (start 1 -0.625) (end 1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 6fdfc84d-4ecf-4609-a1e4-b3fc01d3ad6c)) + (fp_line (start 1 0.625) (end -1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 736bf173-d5a4-4738-a187-d87568d832ae)) + (pad "1" smd roundrect (at -0.9125 0 180) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 22 "HT") (pintype "passive") (tstamp f71b6350-a41e-4bab-bc21-a5583fec8007)) + (pad "2" smd roundrect (at 0.9125 0 180) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 38 "Net-(MK1-+)") (pintype "passive") (tstamp f4f8b82c-0dfe-4b45-91c9-aaf1661e6d50)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Resistor_SMD:R_0805_2012Metric" (layer "F.Cu") + (tstamp b19e0cd8-4737-4787-8466-7f07c0ce0682) + (at 157.4565 77.0928 180) + (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Resistor, small symbol") + (property "ki_keywords" "R resistor") + (path "/873509d9-dbdb-487e-b00a-13ecd5abecb6") + (attr smd) + (fp_text reference "R8" (at 2.6435 0.3848 180) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp cd4100f3-ea61-4201-8325-0322098433c2) + ) + (fp_text value "2.2k" (at 0 1.65) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 7af8dfe4-56e9-4b47-ba6f-470b4744556d) + ) + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.08))) + (tstamp 09501d5c-a821-41e3-91d9-1c88e6955db8) + ) + (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 885802b5-1892-4a05-aee3-71b0e267c65b)) + (fp_line (start -0.227064 0.735) (end 0.227064 0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 621fd6ca-ef4b-4168-b543-639975e298f7)) + (fp_line (start -1.68 -0.95) (end 1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 9afd0b4a-0b70-4bf7-a085-1568fc602c62)) + (fp_line (start -1.68 0.95) (end -1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 4aeabe7c-c77d-43b8-bd25-fcf158005012)) + (fp_line (start 1.68 -0.95) (end 1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 936f3b89-d776-4d11-8df1-4896c26ba566)) + (fp_line (start 1.68 0.95) (end -1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 71d02262-208f-411b-87fc-73991647905f)) + (fp_line (start -1 -0.625) (end 1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 5b7eedde-eb4e-4f4e-9a7a-81bd6a38b539)) + (fp_line (start -1 0.625) (end -1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp a810c321-32d1-4b1f-970b-69587f77da32)) + (fp_line (start 1 -0.625) (end 1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 6c594013-d6e1-457f-b6f7-12f0e8be650a)) + (fp_line (start 1 0.625) (end -1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 184a259a-e2c8-475c-b944-b6c277b9b767)) + (pad "1" smd roundrect (at -0.9125 0 180) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 9 "Net-(C11-Pad1)") (pintype "passive") (tstamp 45fb5707-8779-4058-8d2a-a30cfa171aac)) + (pad "2" smd roundrect (at 0.9125 0 180) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 8 "Net-(C9-Pad2)") (pintype "passive") (tstamp a3dcd38e-f01a-40a0-be89-33e5ca52d62d)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Resistor_SMD:R_0805_2012Metric" (layer "F.Cu") + (tstamp b4482f96-4029-4493-b096-bb359ad7213a) + (at 136.144 64.135 -90) + (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Resistor, small symbol") + (property "ki_keywords" "R resistor") + (path "/7ab4379e-c6f5-4e20-9d1c-1f11f811d1a9") + (attr smd) + (fp_text reference "R103" (at 0 -1.65 90) (layer "F.SilkS") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 6a7f5998-b006-41d7-954b-96d2f2c6dabd) + ) + (fp_text value "100M" (at 0 1.65 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 16ee79d5-58cf-495b-a2f5-7a125d580ce6) + ) + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.08))) + (tstamp 0919b321-26db-4ce1-b9cc-1fa1530b1d64) + ) + (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp d8f064f7-c8e7-4e80-ae94-c5d513b1f828)) + (fp_line (start -0.227064 0.735) (end 0.227064 0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 41ff0fed-2c6f-4925-bea7-5e0991b5d702)) + (fp_line (start -1.68 -0.95) (end 1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 35e0473f-fc64-427b-adcf-b078c2deacc2)) + (fp_line (start -1.68 0.95) (end -1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 78b56a4f-fd14-4d1f-a526-ed16837336c9)) + (fp_line (start 1.68 -0.95) (end 1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp a1ee970d-c193-49fa-b17c-e22b261a2477)) + (fp_line (start 1.68 0.95) (end -1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp e815be63-88e4-4024-98f6-19efa4401211)) + (fp_line (start -1 -0.625) (end 1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp fc000512-a26e-492c-ab1f-1be89c6af5e7)) + (fp_line (start -1 0.625) (end -1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 9f6e0eb6-3aff-49db-88e9-7aa7b981edb6)) + (fp_line (start 1 -0.625) (end 1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 5fff36b3-ae18-4a02-8c00-a198872897ce)) + (fp_line (start 1 0.625) (end -1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp ccd95298-bdfc-4b3e-84bb-61626b150cc7)) + (pad "1" smd roundrect (at -0.9125 0 270) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 29 "Net-(R102-Pad2)") (pintype "passive") (tstamp 5988166d-5b62-40ec-9ace-ad1ca7843383)) + (pad "2" smd roundrect (at 0.9125 0 270) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 30 "Net-(R103-Pad2)") (pintype "passive") (tstamp c1b8577f-6459-4d02-8fb6-b7ec3abcb675)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Diode_SMD:D_SOD-323_HandSoldering" (layer "F.Cu") + (tstamp b99f2f5a-a4dd-46d8-888f-72b72bb51279) + (at 166.2957 79.9122 -90) + (descr "SOD-323") + (tags "SOD-323") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "Sim.Device" "D") + (property "Sim.Pins" "1=K 2=A") + (property "ki_description" "75V 0.15A Fast switching Diode, SOD-323") + (property "ki_keywords" "diode") + (path "/7a1d3ee5-f54b-4738-9bfb-090d51718eb6") + (attr smd) + (fp_text reference "D4" (at -0.0102 -1.8523 -180) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 0821e909-c610-4aa2-a595-84756bb0dd54) + ) + (fp_text value "1N4148WS" (at 0.1 1.9 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 11c3961e-5245-4d29-98f2-221c27498582) + ) + (fp_text user "${REFERENCE}" (at 0 -1.85 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 4e0e5c81-785f-4eda-bc86-6d87bc79e396) + ) + (fp_line (start -2.01 -0.85) (end -2.01 0.85) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 42b87535-3476-45dc-be01-8c0165ac4845)) + (fp_line (start -2.01 -0.85) (end 1.25 -0.85) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 4bd7241b-d2c5-4a98-b526-0c8c88b5e7fd)) + (fp_line (start -2.01 0.85) (end 1.25 0.85) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp d394a481-283b-4961-9993-16a30e36e879)) + (fp_line (start -2 -0.95) (end -2 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp db7c1ebc-de00-4f26-98be-9588bcf4790f)) + (fp_line (start -2 -0.95) (end 2 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp a98baf98-2706-472c-a70c-5373470a9b1d)) + (fp_line (start -2 0.95) (end 2 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 8600c31a-d888-4f3d-814f-9308c6f49bf2)) + (fp_line (start 2 -0.95) (end 2 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 1b9a96fe-ee85-4b00-b539-462ffb1f258c)) + (fp_line (start -0.9 -0.7) (end 0.9 -0.7) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 208b2b7b-dc51-434c-b494-dbdb06b23bfd)) + (fp_line (start -0.9 0.7) (end -0.9 -0.7) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 7781ad52-f693-43f4-9c46-b702b1efc9dc)) + (fp_line (start -0.3 -0.35) (end -0.3 0.35) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp ed8ed537-21fa-4083-b175-13e729d8a2d7)) + (fp_line (start -0.3 0) (end -0.5 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 8110a161-f5d8-4c34-af56-a5d4afb9b3dd)) + (fp_line (start -0.3 0) (end 0.2 -0.35) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 12906019-fe4f-44a8-a362-a5ae2f0e20c4)) + (fp_line (start 0.2 -0.35) (end 0.2 0.35) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 9cfd496c-040d-427d-86c8-908794691371)) + (fp_line (start 0.2 0) (end 0.45 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp ada5fedc-4599-4fb3-80c1-cb667152a439)) + (fp_line (start 0.2 0.35) (end -0.3 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 0d157ac7-a684-49f9-8a8f-710af3288246)) + (fp_line (start 0.9 -0.7) (end 0.9 0.7) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 638e875b-e08a-45b9-b3c7-3b2d83c8486d)) + (fp_line (start 0.9 0.7) (end -0.9 0.7) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp d4df7830-41c4-4606-95c3-ca7aa5d2dfcf)) + (pad "1" smd roundrect (at -1.25 0 270) (size 1 1) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 14 "Net-(D4-K)") (pinfunction "K") (pintype "passive") (tstamp fab34e69-686d-4b2b-af9b-f0245691d16b)) + (pad "2" smd roundrect (at 1.25 0 270) (size 1 1) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 12 "Net-(D3-K)") (pinfunction "A") (pintype "passive") (tstamp 72e33dcc-89d0-4a0e-8430-73f32a816f73)) + (model "${KICAD6_3DMODEL_DIR}/Diode_SMD.3dshapes/D_SOD-323.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "SpiritsKiCADLib:Pads_2pin_10mm" (layer "F.Cu") + (tstamp bd18a8e0-ce85-43d8-9eaf-5f050b07405f) + (at 146.304 56.388) + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Condenser microphone") + (property "ki_keywords" "capacitance condenser microphone") + (path "/0fb2281f-10a1-44ef-b779-9282a8c1d957") + (attr smd) + (fp_text reference "MK1" (at 0.0235 0 unlocked) (layer "F.SilkS") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp f4a2b7a6-ccb2-46ba-b1eb-04559c384988) + ) + (fp_text value "Condenser capsule" (at 0.0508 -0.7112 unlocked) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 9574dddb-e8b0-485a-b852-6a3184b7f219) + ) + (fp_rect (start -6.096 -1.0922) (end 6.096 1.1176) + (stroke (width 0.12) (type default)) (fill none) (layer "F.SilkS") (tstamp 8240e957-3fc0-4c47-98de-0f2dbcc70dbe)) + (fp_rect (start -6.096 -1.2446) (end 6.096 1.27) + (stroke (width 0.12) (type default)) (fill none) (layer "F.CrtYd") (tstamp 1fcf698c-7b83-43cb-b63c-52cba9f4d169)) + (pad "1" smd roundrect (at -5 0) (size 2 2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 7 "GNDA") (pinfunction "-") (pintype "passive") (thermal_bridge_angle 45) (tstamp 71f7d249-6b75-481f-8d20-7a333b1f8a0d)) + (pad "2" smd roundrect (at 5 0) (size 2 2) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 38 "Net-(MK1-+)") (pinfunction "+") (pintype "passive") (thermal_bridge_angle 45) (tstamp 49ea7125-b02b-4f03-ad69-c6f2319c81a5)) + ) + + (footprint "kibuzzard-64153C1C" (layer "F.Cu") + (tstamp bede193d-22a1-4801-abca-b1b193425fb3) + (at 139.954 62.992 90) + (descr "Generated with KiBuzzard") + (tags "kb_params=eyJBbGlnbm1lbnRDaG9pY2UiOiAiQ2VudGVyIiwgIkNhcExlZnRDaG9pY2UiOiAiKCIsICJDYXBSaWdodENob2ljZSI6ICIpIiwgIkZvbnRDb21ib0JveCI6ICJGcmVkb2thT25lIiwgIkhlaWdodEN0cmwiOiAiMSIsICJMYXllckNvbWJvQm94IjogIkYuU2lsa1MiLCAiTXVsdGlMaW5lVGV4dCI6ICJCYWNrcGxhdGUiLCAiUGFkZGluZ0JvdHRvbUN0cmwiOiAiNSIsICJQYWRkaW5nTGVmdEN0cmwiOiAiMiIsICJQYWRkaW5nUmlnaHRDdHJsIjogIjIiLCAiUGFkZGluZ1RvcEN0cmwiOiAiNSIsICJXaWR0aEN0cmwiOiAiIn0=") + (attr board_only exclude_from_pos_files exclude_from_bom) + (fp_text reference "kibuzzard-64153C1C" (at 0 -4.17486 90) (layer "F.SilkS") hide + (effects (font (size 0 0) (thickness 0.15))) + (tstamp c9265bee-5691-4502-b1f8-82d817cc9108) + ) + (fp_text value "G***" (at 0 4.17486 90) (layer "F.SilkS") hide + (effects (font (size 0 0) (thickness 0.15))) + (tstamp bb2d0384-7e71-40a2-8cf4-2f73ecebf30d) + ) + (fp_poly + (pts + (xy 3.440906 -0.037306) + (xy 3.501231 -0.088106) + (xy 3.47345 -0.146844) + (xy 3.394075 -0.169069) + (xy 3.291681 -0.127) + (xy 3.240881 -0.037306) + (xy 3.440906 -0.037306) + ) + + (stroke (width 0) (type solid)) (fill solid) (layer "F.SilkS") (tstamp 3e76f975-19a6-4363-9ab5-a11a96a69fe9)) + (fp_poly + (pts + (xy -2.496344 0.016669) + (xy -2.455069 0.111125) + (xy -2.355056 0.153194) + (xy -2.257425 0.110331) + (xy -2.218531 0.015875) + (xy -2.255838 -0.080169) + (xy -2.35585 -0.124619) + (xy -2.45745 -0.080169) + (xy -2.496344 0.016669) + ) + + (stroke (width 0) (type solid)) (fill solid) (layer "F.SilkS") (tstamp 42df5d58-4924-4887-a3d8-dfadf10e41c1)) + (fp_poly + (pts + (xy 0.181769 -0.086519) + (xy 0.145256 0.007144) + (xy 0.182562 0.100013) + (xy 0.277812 0.142081) + (xy 0.376237 0.100806) + (xy 0.416719 0.007144) + (xy 0.378619 -0.087313) + (xy 0.2794 -0.129381) + (xy 0.181769 -0.086519) + ) + + (stroke (width 0) (type solid)) (fill solid) (layer "F.SilkS") (tstamp c690cb43-5906-4598-a2f7-abe2567ec3ff)) + (fp_poly + (pts + (xy 1.564481 0.016669) + (xy 1.605756 0.111125) + (xy 1.705769 0.153194) + (xy 1.8034 0.110331) + (xy 1.842294 0.015875) + (xy 1.804987 -0.080169) + (xy 1.704975 -0.124619) + (xy 1.603375 -0.080169) + (xy 1.564481 0.016669) + ) + + (stroke (width 0) (type solid)) (fill solid) (layer "F.SilkS") (tstamp 90f75d76-945c-4584-8c63-8da8e0505418)) + (fp_poly + (pts + (xy -3.134519 0.043656) + (xy -3.14325 -0.016669) + (xy -3.172619 -0.048419) + (xy -3.261519 -0.061119) + (xy -3.347244 -0.083344) + (xy -3.375819 -0.174625) + (xy -3.34645 -0.265906) + (xy -3.248819 -0.288131) + (xy -3.172619 -0.321469) + (xy -3.167856 -0.378619) + (xy -3.19405 -0.434181) + (xy -3.272631 -0.450056) + (xy -3.494881 -0.450056) + (xy -3.494881 0.151606) + (xy -3.234531 0.151606) + (xy -3.159522 0.124619) + (xy -3.134519 0.043656) + ) + + (stroke (width 0) (type solid)) (fill solid) (layer "F.SilkS") (tstamp e58653e8-e402-463b-9410-5a958d386d46)) + (fp_poly + (pts + (xy -3.775869 -1.12686) + (xy -3.90816 -1.12686) + (xy -4.018612 -1.121434) + (xy -4.128 -1.105208) + (xy -4.235271 -1.078338) + (xy -4.339391 -1.041083) + (xy -4.439359 -0.993802) + (xy -4.534211 -0.93695) + (xy -4.623033 -0.871075) + (xy -4.704971 -0.796811) + (xy -4.779235 -0.714873) + (xy -4.845111 -0.62605) + (xy -4.901963 -0.531198) + (xy -4.949244 -0.431231) + (xy -4.986499 -0.32711) + (xy -5.013369 -0.21984) + (xy -5.029595 -0.110452) + (xy -5.035021 0) + (xy -5.029595 0.110452) + (xy -5.013369 0.21984) + (xy -4.986499 0.32711) + (xy -4.949244 0.431231) + (xy -4.901963 0.531198) + (xy -4.845111 0.62605) + (xy -4.779235 0.714873) + (xy -4.704971 0.796811) + (xy -4.623033 0.871075) + (xy -4.534211 0.93695) + (xy -4.439359 0.993802) + (xy -4.339391 1.041083) + (xy -4.235271 1.078338) + (xy -4.128 1.105208) + (xy -4.018612 1.121434) + (xy -3.90816 1.12686) + (xy -3.775869 1.12686) + (xy -3.218656 1.12686) + (xy -3.218656 0.432594) + (xy -3.636169 0.432594) + (xy -3.724275 0.417512) + (xy -3.766344 0.372269) + (xy -3.775869 0.289719) + (xy -3.775869 -0.591344) + (xy -3.773488 -0.646906) + (xy -3.758406 -0.688181) + (xy -3.716338 -0.720328) + (xy -3.634581 -0.731044) + (xy -3.234531 -0.731044) + (xy -3.142456 -0.719755) + (xy -3.060965 -0.685888) + (xy -2.990056 -0.629444) + (xy -2.93273 -0.556066) + (xy -2.898334 -0.473516) + (xy -2.886869 -0.381794) + (xy -2.90195 -0.281384) + (xy -2.947194 -0.189706) + (xy -2.895159 -0.112624) + (xy -2.863938 -0.029545) + (xy -2.853531 0.059531) + (xy -2.867025 0.159632) + (xy -2.903273 0.248267) + (xy -2.962275 0.325438) + (xy -3.037681 0.384969) + (xy -3.123142 0.420688) + (xy -3.218656 0.432594) + (xy -3.218656 1.12686) + (xy -2.055813 1.12686) + (xy -2.055813 0.431006) + (xy -2.1717 0.409575) + (xy -2.205831 0.346869) + (xy -2.284214 0.409972) + (xy -2.401888 0.431006) + (xy -2.491228 0.417072) + (xy -2.57616 0.375267) + (xy -2.656681 0.305594) + (xy -2.721945 0.217488) + (xy -2.761103 0.120385) + (xy -2.774156 0.014288) + (xy -2.761015 -0.091722) + (xy -2.721592 -0.18856) + (xy -2.655888 -0.276225) + (xy -2.574484 -0.345458) + (xy -2.487965 -0.386997) + (xy -2.396331 -0.400844) + (xy -2.297906 -0.381794) + (xy -2.235994 -0.346075) + (xy -2.207419 -0.313531) + (xy -2.171303 -0.380206) + (xy -2.082006 -0.402431) + (xy -1.989931 -0.392906) + (xy -1.947863 -0.359569) + (xy -1.933575 -0.3175) + (xy -1.931194 -0.262731) + (xy -1.931194 0.292894) + (xy -1.933575 0.347663) + (xy -1.947069 0.389731) + (xy -1.985367 0.420688) + (xy -2.055813 0.431006) + (xy -2.055813 1.12686) + (xy -1.396206 1.12686) + (xy -1.396206 0.442119) + (xy -1.493397 0.430301) + (xy -1.588117 0.394847) + (xy -1.680369 0.335756) + (xy -1.739503 0.276423) + (xy -1.786731 0.200025) + (xy -1.817688 0.110728) + (xy -1.828006 0.0127) + (xy -1.817688 -0.084931) + (xy -1.786731 -0.173037) + (xy -1.739503 -0.248245) + (xy -1.680369 -0.307181) + (xy -1.590587 -0.36539) + (xy -1.496924 -0.400315) + (xy -1.399381 -0.411956) + (xy -1.281906 -0.395288) + (xy -1.197769 -0.362744) + (xy -1.172369 -0.346869) + (xy -1.127919 -0.316706) + (xy -1.086644 -0.244475) + (xy -1.119981 -0.153194) + (xy -1.175941 -0.087709) + (xy -1.229519 -0.065881) + (xy -1.315244 -0.100806) + (xy -1.397 -0.127794) + (xy -1.496219 -0.089694) + (xy -1.542256 0.015875) + (xy -1.497806 0.12065) + (xy -1.40335 0.157956) + (xy -1.309688 0.128587) + (xy -1.239044 0.099219) + (xy -1.186259 0.120253) + (xy -1.123156 0.183356) + (xy -1.086644 0.265906) + (xy -1.108472 0.324247) + (xy -1.173956 0.378619) + (xy -1.274763 0.426244) + (xy -1.396206 0.442119) + (xy -1.396206 1.12686) + (xy -0.364331 1.12686) + (xy -0.364331 0.443706) + (xy -0.461169 0.397669) + (xy -0.477044 0.386556) + (xy -0.523478 0.345083) + (xy -0.589756 0.280988) + (xy -0.656828 0.216495) + (xy -0.705644 0.173831) + (xy -0.705644 0.296069) + (xy -0.708025 0.350837) + (xy -0.723106 0.392906) + (xy -0.763984 0.423863) + (xy -0.845344 0.434181) + (xy -0.925909 0.423466) + (xy -0.967581 0.391319) + (xy -0.981075 0.34925) + (xy -0.983456 0.294481) + (xy -0.983456 -0.656431) + (xy -0.981075 -0.7112) + (xy -0.967581 -0.753269) + (xy -0.925513 -0.785416) + (xy -0.843756 -0.796131) + (xy -0.735806 -0.769144) + (xy -0.707231 -0.699294) + (xy -0.705644 -0.654844) + (xy -0.705644 -0.151606) + (xy -0.619125 -0.232569) + (xy -0.532606 -0.313531) + (xy -0.513556 -0.326231) + (xy -0.418306 -0.369094) + (xy -0.327025 -0.3048) + (xy -0.275431 -0.203994) + (xy -0.334169 -0.118269) + (xy -0.491331 0.015081) + (xy -0.280194 0.189706) + (xy -0.230188 0.240506) + (xy -0.219869 0.273844) + (xy -0.269081 0.377031) + (xy -0.364331 0.443706) + (xy -0.364331 1.12686) + (xy 0.003969 1.12686) + (xy 0.003969 0.796131) + (xy -0.074613 0.786606) + (xy -0.115888 0.754856) + (xy -0.130175 0.715169) + (xy -0.132556 0.661194) + (xy -0.132556 -0.265906) + (xy -0.130175 -0.319881) + (xy -0.116681 -0.359569) + (xy -0.078978 -0.391716) + (xy -0.010319 -0.402431) + (xy 0.103187 -0.381) + (xy 0.137319 -0.318294) + (xy 0.214908 -0.380206) + (xy 0.327025 -0.400844) + (xy 0.41178 -0.387262) + (xy 0.493536 -0.346516) + (xy 0.572294 -0.278606) + (xy 0.636676 -0.192705) + (xy 0.675305 -0.097984) + (xy 0.688181 0.005556) + (xy 0.675393 0.109097) + (xy 0.637028 0.203817) + (xy 0.573087 0.289719) + (xy 0.494683 0.357628) + (xy 0.412926 0.398374) + (xy 0.327819 0.411956) + (xy 0.215503 0.3937) + (xy 0.138906 0.338931) + (xy 0.138906 0.659606) + (xy 0.136525 0.713581) + (xy 0.122237 0.754063) + (xy 0.081756 0.786606) + (xy 0.003969 0.796131) + (xy 0.003969 1.12686) + (xy 1.121569 1.12686) + (xy 1.121569 0.434975) + (xy 0.994569 0.427831) + (xy 0.893762 0.399653) + (xy 0.835819 0.346869) + (xy 0.802481 0.246062) + (xy 0.791369 0.099219) + (xy 0.791369 -0.656431) + (xy 0.79375 -0.7112) + (xy 0.807244 -0.753269) + (xy 0.849312 -0.785416) + (xy 0.931069 -0.796131) + (xy 1.00965 -0.785416) + (xy 1.051719 -0.753269) + (xy 1.0668 -0.710406) + (xy 1.069181 -0.654844) + (xy 1.069181 0.080169) + (xy 1.078706 0.1524) + (xy 1.120775 0.167481) + (xy 1.164431 0.169863) + (xy 1.191419 0.183356) + (xy 1.223169 0.296069) + (xy 1.215231 0.376634) + (xy 1.191419 0.418306) + (xy 1.121569 0.434975) + (xy 1.121569 1.12686) + (xy 2.005012 1.12686) + (xy 2.005012 0.431006) + (xy 1.889125 0.409575) + (xy 1.854994 0.346869) + (xy 1.776611 0.409972) + (xy 1.658937 0.431006) + (xy 1.569597 0.417072) + (xy 1.484665 0.375267) + (xy 1.404144 0.305594) + (xy 1.33888 0.217488) + (xy 1.299722 0.120385) + (xy 1.286669 0.014288) + (xy 1.29981 -0.091722) + (xy 1.339233 -0.18856) + (xy 1.404937 -0.276225) + (xy 1.486341 -0.345458) + (xy 1.57286 -0.386997) + (xy 1.664494 -0.400844) + (xy 1.762919 -0.381794) + (xy 1.824831 -0.346075) + (xy 1.853406 -0.313531) + (xy 1.889522 -0.380206) + (xy 1.978819 -0.402431) + (xy 2.070894 -0.392906) + (xy 2.112962 -0.359569) + (xy 2.12725 -0.3175) + (xy 2.129631 -0.262731) + (xy 2.129631 0.292894) + (xy 2.12725 0.347663) + (xy 2.113756 0.389731) + (xy 2.075458 0.420688) + (xy 2.005012 0.431006) + (xy 2.005012 1.12686) + (xy 2.699544 1.12686) + (xy 2.699544 0.434181) + (xy 2.598297 0.425891) + (xy 2.514688 0.40102) + (xy 2.448719 0.359569) + (xy 2.401094 0.298362) + (xy 2.372519 0.214224) + (xy 2.362994 0.107156) + (xy 2.362994 -0.127794) + (xy 2.297906 -0.123031) + (xy 2.239962 -0.150019) + (xy 2.216944 -0.242094) + (xy 2.224881 -0.33655) + (xy 2.247106 -0.378619) + (xy 2.310606 -0.399256) + (xy 2.362994 -0.392906) + (xy 2.362994 -0.556419) + (xy 2.365375 -0.610394) + (xy 2.380456 -0.648494) + (xy 2.421334 -0.678259) + (xy 2.502694 -0.688181) + (xy 2.588816 -0.673497) + (xy 2.631281 -0.629444) + (xy 2.639219 -0.548481) + (xy 2.639219 -0.392906) + (xy 2.744787 -0.399256) + (xy 2.798762 -0.396875) + (xy 2.840831 -0.381794) + (xy 2.871787 -0.340916) + (xy 2.882106 -0.259556) + (xy 2.871391 -0.178991) + (xy 2.839244 -0.137319) + (xy 2.797175 -0.123825) + (xy 2.742406 -0.121444) + (xy 2.639219 -0.127794) + (xy 2.639219 0.091281) + (xy 2.652712 0.153194) + (xy 2.703512 0.172244) + (xy 2.760662 0.174625) + (xy 2.802731 0.189706) + (xy 2.839244 0.296069) + (xy 2.828131 0.376634) + (xy 2.794794 0.418306) + (xy 2.752725 0.4318) + (xy 2.699544 0.434181) + (xy 2.699544 1.12686) + (xy 3.396456 1.12686) + (xy 3.396456 0.454819) + (xy 3.28553 0.444698) + (xy 3.1877 0.414337) + (xy 3.106539 0.367308) + (xy 3.045619 0.307181) + (xy 2.990056 0.218105) + (xy 2.956719 0.122326) + (xy 2.945606 0.019844) + (xy 2.959982 -0.104599) + (xy 3.003109 -0.211226) + (xy 3.074987 -0.300037) + (xy 3.168385 -0.366624) + (xy 3.276071 -0.406576) + (xy 3.398044 -0.419894) + (xy 3.501033 -0.41017) + (xy 3.589337 -0.381) + (xy 3.662958 -0.332383) + (xy 3.721894 -0.264319) + (xy 3.762375 -0.177998) + (xy 3.775869 -0.084137) + (xy 3.763764 0.000794) + (xy 3.72745 0.060325) + (xy 3.620294 0.107156) + (xy 3.244056 0.107156) + (xy 3.296444 0.181769) + (xy 3.401219 0.211931) + (xy 3.483372 0.207169) + (xy 3.545681 0.192881) + (xy 3.563144 0.186531) + (xy 3.626644 0.169069) + (xy 3.713956 0.240506) + (xy 3.734594 0.313531) + (xy 3.71346 0.375345) + (xy 3.650059 0.419497) + (xy 3.544391 0.445988) + (xy 3.396456 0.454819) + (xy 3.396456 1.12686) + (xy 3.775869 1.12686) + (xy 3.90816 1.12686) + (xy 4.018612 1.121434) + (xy 4.128 1.105208) + (xy 4.235271 1.078338) + (xy 4.339391 1.041083) + (xy 4.439359 0.993802) + (xy 4.534211 0.93695) + (xy 4.623033 0.871075) + (xy 4.704971 0.796811) + (xy 4.779235 0.714873) + (xy 4.845111 0.62605) + (xy 4.901963 0.531198) + (xy 4.949244 0.431231) + (xy 4.986499 0.32711) + (xy 5.013369 0.21984) + (xy 5.029595 0.110452) + (xy 5.035021 0) + (xy 5.029595 -0.110452) + (xy 5.013369 -0.21984) + (xy 4.986499 -0.32711) + (xy 4.949244 -0.431231) + (xy 4.901963 -0.531198) + (xy 4.845111 -0.62605) + (xy 4.779235 -0.714873) + (xy 4.704971 -0.796811) + (xy 4.623033 -0.871075) + (xy 4.534211 -0.93695) + (xy 4.439359 -0.993802) + (xy 4.339391 -1.041083) + (xy 4.235271 -1.078338) + (xy 4.128 -1.105208) + (xy 4.018612 -1.121434) + (xy 3.90816 -1.12686) + (xy 3.775869 -1.12686) + (xy -3.775869 -1.12686) + ) + + (stroke (width 0) (type solid)) (fill solid) (layer "F.SilkS") (tstamp 73544b15-d799-46cd-b618-50ae3cd76019)) + ) + + (footprint "Capacitor_SMD:C_0805_2012Metric" (layer "F.Cu") + (tstamp c6b65ac4-c6c9-45cc-b01c-13a4c810b40d) + (at 165.608 61.487 90) + (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") + (tags "capacitor") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Unpolarized capacitor, small symbol") + (property "ki_keywords" "capacitor cap") + (path "/4c3b49f9-743c-4caf-b4f0-849b0e240b05") + (attr smd) + (fp_text reference "C18" (at 2.286 0.635 180) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp e8ed2326-c836-49ef-9db5-5865e8b2bdac) + ) + (fp_text value "100nF 100V" (at 0 1.68 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp eccf8f21-4d6e-4b1c-90b7-ccb835f4de8e) + ) + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.08))) + (tstamp 019b1263-5da1-491e-9d8d-e644143432fe) + ) + (fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 6d1685db-7662-432f-a6b9-22ad2bdf4bc0)) + (fp_line (start -0.261252 0.735) (end 0.261252 0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 8e38c40c-3f40-4059-940a-42a1c7617e01)) + (fp_line (start -1.7 -0.98) (end 1.7 -0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 41d52daa-4fdc-43eb-821c-3fce04c91d99)) + (fp_line (start -1.7 0.98) (end -1.7 -0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 7f66c4da-e809-4304-a4a1-afc3fa3f6f4a)) + (fp_line (start 1.7 -0.98) (end 1.7 0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp d415d4cb-c777-47a5-a477-05458ece7d2a)) + (fp_line (start 1.7 0.98) (end -1.7 0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp b7c4ff23-f34e-4706-860f-57a83977fd27)) + (fp_line (start -1 -0.625) (end 1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 8c02e117-014f-44b6-b1aa-ff38e611919c)) + (fp_line (start -1 0.625) (end -1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp e265a592-6111-404c-b1dc-ad88afb559dd)) + (fp_line (start 1 -0.625) (end 1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp a051a707-d61a-4578-b2a8-476c5a24274c)) + (fp_line (start 1 0.625) (end -1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp cf1078cb-948b-4f07-b3b6-ff24d3eb629d)) + (pad "1" smd roundrect (at -0.95 0 90) (size 1 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 37 "GNDREF") (pintype "passive") (tstamp 20f33cad-0462-4fc5-8963-43d2a8bd971a)) + (pad "2" smd roundrect (at 0.95 0 90) (size 1 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 22 "HT") (pintype "passive") (tstamp 4a8d3697-e9a8-4236-9487-4e543174139e)) + (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Resistor_SMD:R_0805_2012Metric" (layer "F.Cu") + (tstamp c9be08a1-8cdb-4e1e-ace1-1049845afdbb) + (at 136.144 67.564 -90) + (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Resistor, small symbol") + (property "ki_keywords" "R resistor") + (path "/f11e24a4-0356-4421-9aed-0d418f381e66") + (attr smd) + (fp_text reference "R104" (at 0 -1.65 90) (layer "F.SilkS") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp b49b0d9a-1314-492b-ad58-d51f0aab6465) + ) + (fp_text value "100M" (at 0 1.65 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 93331105-151d-4319-99c9-7e8f14b7eb28) + ) + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.08))) + (tstamp fc36c29c-1faf-455b-a6b3-fc366dbff647) + ) + (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 08afd9e2-9482-4b5a-ba19-17b34cc6d64c)) + (fp_line (start -0.227064 0.735) (end 0.227064 0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp d2247196-304d-49da-a79b-d5242af161c9)) + (fp_line (start -1.68 -0.95) (end 1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 965f0f8d-ccbc-4b9d-8478-4c2f3ea71b74)) + (fp_line (start -1.68 0.95) (end -1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 29f0b009-5004-45ce-a677-ae9c6279a872)) + (fp_line (start 1.68 -0.95) (end 1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 9d0588a7-fe84-4342-b853-7961c6002f2c)) + (fp_line (start 1.68 0.95) (end -1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp cb202143-0a96-4b96-979f-ef5e3cc9c6e6)) + (fp_line (start -1 -0.625) (end 1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp f4a6685a-c121-4af9-9c36-0f6de150249d)) + (fp_line (start -1 0.625) (end -1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 6b981bd2-ce26-4589-a961-61b4a44e65e0)) + (fp_line (start 1 -0.625) (end 1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 633e4f7b-099f-4288-b8e2-1f04814606db)) + (fp_line (start 1 0.625) (end -1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 23e8c05b-8d75-4dd4-8a5f-6b116ec1582e)) + (pad "1" smd roundrect (at -0.9125 0 270) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 30 "Net-(R103-Pad2)") (pintype "passive") (tstamp 70cbbd8b-2491-49bc-a60c-611dcb1e64c9)) + (pad "2" smd roundrect (at 0.9125 0 270) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 31 "Net-(R104-Pad2)") (pintype "passive") (tstamp cb9d3255-6d59-4db8-8ba7-e870cec98532)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Resistor_SMD:R_0805_2012Metric" (layer "F.Cu") + (tstamp d4461041-3d19-48ef-a24c-b5d33d2e6231) + (at 143.764 73.66) + (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Resistor, small symbol") + (property "ki_keywords" "R resistor") + (path "/a726aa04-4fce-4df2-a8c3-860739eceff7") + (attr smd) + (fp_text reference "R108" (at 0 -1.65) (layer "F.SilkS") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 1d819126-5eee-4966-a2be-eb821a01c2b1) + ) + (fp_text value "100M" (at 0 1.65) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp d900aca4-d18f-4299-b332-4e4ac5f9668c) + ) + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.08))) + (tstamp dbb91523-7b1d-465c-867b-ad987d77653f) + ) + (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 5dd1edca-5220-44b6-b492-c9b80e9b8a38)) + (fp_line (start -0.227064 0.735) (end 0.227064 0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 8852a295-4403-4034-a6e2-5d8956b9e33a)) + (fp_line (start -1.68 -0.95) (end 1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp e73ea19e-9f59-4f67-ba3f-ca95bc24acf3)) + (fp_line (start -1.68 0.95) (end -1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp ad0602cc-cf0b-4298-af41-ea715a8158c0)) + (fp_line (start 1.68 -0.95) (end 1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 7d614656-431a-47ed-9ea4-396ec6bb8db6)) + (fp_line (start 1.68 0.95) (end -1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp fa66c7c1-13de-4727-a727-c4f4dd408e76)) + (fp_line (start -1 -0.625) (end 1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp cb6ff371-0222-457d-ab7e-20a293f91785)) + (fp_line (start -1 0.625) (end -1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 98f099e2-5442-4d8a-9199-77b8132d47d9)) + (fp_line (start 1 -0.625) (end 1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 78b23ad3-5b0f-460e-8132-540fa93728d7)) + (fp_line (start 1 0.625) (end -1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 43e71a5e-ba98-4964-aab1-1386a111bee3)) + (pad "1" smd roundrect (at -0.9125 0) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 34 "Net-(R107-Pad2)") (pintype "passive") (tstamp de6e9623-b9e1-4938-a001-afdcf811d38a)) + (pad "2" smd roundrect (at 0.9125 0) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 35 "Net-(R108-Pad2)") (pintype "passive") (tstamp 20eb2ee5-0f0b-4c2e-bc0d-8704b41895dd)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "MountingHole:MountingHole_2.7mm_M2.5_ISO14580" (layer "F.Cu") + (tstamp df590801-4488-4cb2-8634-6648a8046935) + (at 167.143615 51.396884) + (descr "Mounting Hole 2.7mm, no annular, M2.5, ISO14580") + (tags "mounting hole 2.7mm no annular m2.5 iso14580") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Mounting Hole without connection") + (property "ki_keywords" "mounting hole") + (path "/cc1b821d-2270-409a-ae39-fcc4f07bbeae") + (attr exclude_from_pos_files) + (fp_text reference "H2" (at 0 -3.25) (layer "F.SilkS") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp f3b26584-0250-48e6-b732-ed7d4c2e56b6) + ) + (fp_text value "M2.5" (at 0 3.25) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 8584bf49-6ff6-4802-8f21-24deaec95c3d) + ) + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 66c1d985-152e-4717-9d3a-c80dac2df508) + ) + (fp_circle (center 0 0) (end 2.25 0) + (stroke (width 0.15) (type solid)) (fill none) (layer "Cmts.User") (tstamp 48244717-44e3-43ce-962e-230e19102eab)) + (fp_circle (center 0 0) (end 2.5 0) + (stroke (width 0.05) (type solid)) (fill none) (layer "F.CrtYd") (tstamp 792e0ca5-534c-48d2-b071-9e2bf949a670)) + (pad "" np_thru_hole oval (at 0 0) (size 3.5 2.7) (drill oval 3.5 2.7) (layers "F&B.Cu" "*.Mask") (tstamp af5996dc-a28f-4eb3-b0e7-17ed724ecfdb)) + ) + + (footprint "Diode_SMD:D_SOD-323_HandSoldering" (layer "F.Cu") + (tstamp e302acf1-d180-4845-8bdc-4fbed75e0455) + (at 167.005 67.075 -90) + (descr "SOD-323") + (tags "SOD-323") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "Sim.Device" "D") + (property "Sim.Pins" "1=K 2=A") + (property "ki_description" "75V 0.15A Fast switching Diode, SOD-323") + (property "ki_keywords" "diode") + (path "/42fbbc84-0e74-49f5-999f-d6317bad1392") + (attr smd) + (fp_text reference "D6" (at 0 -1.85 -180) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 56fee61c-4984-4939-8ebd-ef2ed723930f) + ) + (fp_text value "1N4148WS" (at 0.1 1.9 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 8d0362e7-8484-4d99-8e5c-691e5394bb7d) + ) + (fp_text user "${REFERENCE}" (at 0 -1.85 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 5573ebc3-5c8c-4595-8e2d-7186cf3d4e6b) + ) + (fp_line (start -2.01 -0.85) (end -2.01 0.85) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 51f00c5a-5373-4213-93d9-104f763f2784)) + (fp_line (start -2.01 -0.85) (end 1.25 -0.85) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 92920b40-75cc-439f-a50a-4545643f5a6a)) + (fp_line (start -2.01 0.85) (end 1.25 0.85) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 6e63073b-edd4-4b76-b058-f33d0fa756f8)) + (fp_line (start -2 -0.95) (end -2 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 3b08045b-1d01-4072-980e-727d606afc70)) + (fp_line (start -2 -0.95) (end 2 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 905a4395-912b-43c0-8b8b-7dbb9d7f2086)) + (fp_line (start -2 0.95) (end 2 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp ccbc6aa0-9c16-4539-9976-8e91517ad0f9)) + (fp_line (start 2 -0.95) (end 2 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp a9d9013d-61b4-428c-8f73-a255c0e9859c)) + (fp_line (start -0.9 -0.7) (end 0.9 -0.7) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp b9ad2daa-f421-444e-b7f0-9c6fc98b7be1)) + (fp_line (start -0.9 0.7) (end -0.9 -0.7) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp fd58fbef-ebf0-457b-a9b6-d36f70047cf7)) + (fp_line (start -0.3 -0.35) (end -0.3 0.35) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 62970712-73ac-4e2a-bdc0-550413f085e5)) + (fp_line (start -0.3 0) (end -0.5 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 54ace657-c30e-4a78-a1a2-cd6b8036abb3)) + (fp_line (start -0.3 0) (end 0.2 -0.35) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 04d8eade-0bc8-41b8-be58-dfc00fea7143)) + (fp_line (start 0.2 -0.35) (end 0.2 0.35) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp e032e2da-940c-4da9-9487-633841c023fd)) + (fp_line (start 0.2 0) (end 0.45 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 770e60f4-e442-4595-b00a-64ad84c52e42)) + (fp_line (start 0.2 0.35) (end -0.3 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 7a4e7489-5268-42db-90f2-aac3f4b342a4)) + (fp_line (start 0.9 -0.7) (end 0.9 0.7) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 702d769c-97f8-42a9-8401-0016c1a11014)) + (fp_line (start 0.9 0.7) (end -0.9 0.7) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 8093012e-503c-4575-87b3-21d0a5f7f349)) + (pad "1" smd roundrect (at -1.25 0 270) (size 1 1) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 18 "Net-(D6-K)") (pinfunction "K") (pintype "passive") (tstamp fc297144-906d-451d-a8bc-d705647450a1)) + (pad "2" smd roundrect (at 1.25 0 270) (size 1 1) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 16 "Net-(D5-K)") (pinfunction "A") (pintype "passive") (tstamp b2a5170c-efed-48a8-9036-2912fabd32ab)) + (model "${KICAD6_3DMODEL_DIR}/Diode_SMD.3dshapes/D_SOD-323.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Resistor_SMD:R_0805_2012Metric" (layer "F.Cu") + (tstamp e4b69289-abc0-48c6-8c8c-c148ae818ae4) + (at 144.526 70.993 90) + (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Resistor, small symbol") + (property "ki_keywords" "R resistor") + (path "/65042cbe-fc88-4e5a-b16b-b9d860d76170") + (attr smd) + (fp_text reference "R109" (at 0 -1.65 90) (layer "F.SilkS") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 0a4423a1-4737-441d-aafa-e53a9bcd3bab) + ) + (fp_text value "100M" (at 0 1.65 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 89119235-bbdd-4f98-a2c9-19b2f9267d91) + ) + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.08))) + (tstamp b2499426-24df-49e1-b1f3-44d6b9f5f0b7) + ) + (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 5177cdbf-de8c-40a5-a9a5-fd2967d858f1)) + (fp_line (start -0.227064 0.735) (end 0.227064 0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 27221e22-69ce-4cd9-8f22-0f6e7980bc7c)) + (fp_line (start -1.68 -0.95) (end 1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 46544df0-9938-4bf2-af67-549665c4052d)) + (fp_line (start -1.68 0.95) (end -1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 626352a4-fc84-4e61-9082-7d5e71f5aff5)) + (fp_line (start 1.68 -0.95) (end 1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 74829997-d991-4e7e-8f4d-843f3d5ea25b)) + (fp_line (start 1.68 0.95) (end -1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 149d5054-ee84-4ba6-9f38-6650ca45ddcc)) + (fp_line (start -1 -0.625) (end 1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 23fc4856-478a-4293-bd41-9620696dd4f4)) + (fp_line (start -1 0.625) (end -1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 76fb7cc5-0a77-42f6-a64a-b6d1ae0f150a)) + (fp_line (start 1 -0.625) (end 1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp f4504115-9807-40e3-8426-34acfaf164fd)) + (fp_line (start 1 0.625) (end -1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 604daf3a-1d31-48b7-af9b-57f47252929c)) + (pad "1" smd roundrect (at -0.9125 0 90) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 35 "Net-(R108-Pad2)") (pintype "passive") (tstamp 9f10e827-ba46-4b5f-8b3c-6b29a8f88097)) + (pad "2" smd roundrect (at 0.9125 0 90) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 36 "Net-(R109-Pad2)") (pintype "passive") (tstamp 7cbc26d2-d7dd-4d30-81b0-6822f81ca145)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Capacitor_SMD:C_0805_2012Metric" (layer "F.Cu") + (tstamp e87ff4c5-99a6-4931-a5f1-6917edc8ea39) + (at 164.084 89.789 90) + (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") + (tags "capacitor") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Unpolarized capacitor, small symbol") + (property "ki_keywords" "capacitor cap") + (path "/4054f3da-004e-436f-8dad-c913f7c7dfdf") + (attr smd) + (fp_text reference "C4" (at -2.667 0 180) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp ec278475-5a2d-4f80-a4c0-f206461b50c8) + ) + (fp_text value "100nF 100V" (at 0 1.68 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp ec13519c-b5fc-460d-a69c-f3a1c308af51) + ) + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.08))) + (tstamp 3c8b992e-9641-4d06-b059-bdeb9ca0ce38) + ) + (fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 62015049-a72d-491f-9b1f-72b1cfce2220)) + (fp_line (start -0.261252 0.735) (end 0.261252 0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp b6d92eba-5a1c-4e73-ad8e-c346093ef343)) + (fp_line (start -1.7 -0.98) (end 1.7 -0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 5aa00b82-be8b-497a-a7c4-a944f45e0ca3)) + (fp_line (start -1.7 0.98) (end -1.7 -0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 444cf432-d13f-4ee2-a778-5242ef434541)) + (fp_line (start 1.7 -0.98) (end 1.7 0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp b47520e0-900b-4b50-8667-e63229b35687)) + (fp_line (start 1.7 0.98) (end -1.7 0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 78bb5353-0414-4dd4-bc71-2577b979da99)) + (fp_line (start -1 -0.625) (end 1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 6a9b8001-6d93-4852-a39f-24cd283018d7)) + (fp_line (start -1 0.625) (end -1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 360fc4b4-1a94-4c77-9d4e-afee3de88b60)) + (fp_line (start 1 -0.625) (end 1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 4cae578d-ccbf-44cf-b84b-5144a94bb8c8)) + (fp_line (start 1 0.625) (end -1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 066990bc-57b6-4354-8508-1ce3603dd478)) + (pad "1" smd roundrect (at -0.95 0 90) (size 1 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 37 "GNDREF") (pintype "passive") (tstamp 097d7a47-bf2c-4f64-bdeb-985d9261ac12)) + (pad "2" smd roundrect (at 0.95 0 90) (size 1 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 5 "+12V") (pintype "passive") (tstamp 21306ca2-2c61-4838-a541-fe5286db1692)) + (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Resistor_SMD:R_0805_2012Metric" (layer "F.Cu") + (tstamp e9c76f8d-f475-4733-ae4a-4886b8d21a75) + (at 136.8825 73.66) + (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Resistor, small symbol") + (property "ki_keywords" "R resistor") + (path "/b444fa84-c56c-4cd6-a7e2-f57f568a463a") + (attr smd) + (fp_text reference "R106" (at 0 -1.65) (layer "F.SilkS") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp eb53c2cf-6875-4c41-9ef4-1ef8c2bc8e27) + ) + (fp_text value "100M" (at 0 1.65) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 63e50e30-64ac-4bdf-9b47-7d37a9363ac9) + ) + (fp_text user "${REFERENCE}" (at 0 0) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.08))) + (tstamp 76bfbb6c-dbe8-4ca4-9249-d637583cf977) + ) + (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp fe8dce70-c048-4b78-a851-f91b60ddceef)) + (fp_line (start -0.227064 0.735) (end 0.227064 0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 0bac8c3b-df15-4eaf-8238-c524d84ee044)) + (fp_line (start -1.68 -0.95) (end 1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 9e85adcb-5828-4a17-ba78-aa0dab4fdee0)) + (fp_line (start -1.68 0.95) (end -1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 939ecc02-387e-4cc9-bbf5-895d6481181c)) + (fp_line (start 1.68 -0.95) (end 1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp dc8c7755-c088-477e-b3c1-b97980969702)) + (fp_line (start 1.68 0.95) (end -1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 23e1ee10-37ca-4381-ae14-35c8daef4957)) + (fp_line (start -1 -0.625) (end 1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp af4bd6e5-4fa3-4079-bf02-c67d25c2c7d4)) + (fp_line (start -1 0.625) (end -1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 753ebd3d-f4b9-4b65-afa8-8843c75bf69b)) + (fp_line (start 1 -0.625) (end 1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 9f4ee467-cd65-4b1a-b125-83f1091867f2)) + (fp_line (start 1 0.625) (end -1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 47c1ef3e-7155-42ca-b280-9f31a028d283)) + (pad "1" smd roundrect (at -0.9125 0) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 32 "Net-(R105-Pad2)") (pintype "passive") (tstamp f7601b23-5b3f-4e88-8d70-68be1ad458a8)) + (pad "2" smd roundrect (at 0.9125 0) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 33 "Net-(R106-Pad2)") (pintype "passive") (tstamp c7eaec01-29e3-4119-b0b4-417675364a40)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Capacitor_SMD:C_0805_2012Metric" (layer "F.Cu") + (tstamp ec86d457-9280-4b53-9996-10211beac7eb) + (at 166.5497 70.946 -90) + (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") + (tags "capacitor") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Unpolarized capacitor, small symbol") + (property "ki_keywords" "capacitor cap") + (path "/6bd431c9-2247-4e33-b034-88dde2f0b3a2") + (attr smd) + (fp_text reference "C14" (at 0.193 -2.4873 -180) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 4fdad106-476b-4b43-8857-53c80883ad09) + ) + (fp_text value "10nF" (at 0 1.68 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp e86a22e1-efe0-4251-9215-57b4c70ce0ed) + ) + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.08))) + (tstamp aec9e29c-094b-48cc-af43-6588c6445812) + ) + (fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 3abd6ad5-455b-4416-ab97-132048363717)) + (fp_line (start -0.261252 0.735) (end 0.261252 0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp c76dc982-3bd8-46a9-836b-3718c211f75f)) + (fp_line (start -1.7 -0.98) (end 1.7 -0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 478cf2d9-a287-4e6e-b857-8f0beebca0b4)) + (fp_line (start -1.7 0.98) (end -1.7 -0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 93640002-1327-40d2-8857-6eaca74e99d7)) + (fp_line (start 1.7 -0.98) (end 1.7 0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 833f4b60-582f-485c-8fc1-ad45a3a5e471)) + (fp_line (start 1.7 0.98) (end -1.7 0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 09789645-7710-4f82-8b4a-d9c7de9394a2)) + (fp_line (start -1 -0.625) (end 1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp cf9742ef-7998-4dad-aa07-37f2fa4576c8)) + (fp_line (start -1 0.625) (end -1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 106a8fe8-4299-472f-81fe-da1b52376663)) + (fp_line (start 1 -0.625) (end 1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 11a2dcea-8215-4c4c-8144-c941fab569db)) + (fp_line (start 1 0.625) (end -1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp fce708e9-e73c-4bde-9129-a6e6c16f24f8)) + (pad "1" smd roundrect (at -0.95 0 270) (size 1 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 15 "Net-(C14-Pad1)") (pintype "passive") (tstamp 2b1651c2-9b62-4e0a-94c5-51b3b100bd7b)) + (pad "2" smd roundrect (at 0.95 0 270) (size 1 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 16 "Net-(D5-K)") (pintype "passive") (tstamp ecb2366c-7bb3-4c71-94bc-cc73307b6425)) + (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Diode_SMD:D_SOD-323_HandSoldering" (layer "F.Cu") + (tstamp f09268d5-06db-4deb-9608-6a17988578df) + (at 166.6767 74.9846 -90) + (descr "SOD-323") + (tags "SOD-323") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "Sim.Device" "D") + (property "Sim.Pins" "1=K 2=A") + (property "ki_description" "75V 0.15A Fast switching Diode, SOD-323") + (property "ki_keywords" "diode") + (path "/0b1863fa-d00c-4223-b9c6-0913eb2a0a00") + (attr smd) + (fp_text reference "D5" (at 0 -1.85 -180) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 1bab427c-f3b9-4bad-b567-277068458071) + ) + (fp_text value "1N4148WS" (at 0.1 1.9 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 80bca479-3c88-42e3-8755-a8af12ec570d) + ) + (fp_text user "${REFERENCE}" (at 0 -1.85 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 80cb0b3c-632f-4f9b-8ed6-ee1d3ad18955) + ) + (fp_line (start -2.01 -0.85) (end -2.01 0.85) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 9ac6c1a8-8006-46a5-97d8-0f98f7327d0b)) + (fp_line (start -2.01 -0.85) (end 1.25 -0.85) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp abee2d54-5464-471b-b158-3d479821c684)) + (fp_line (start -2.01 0.85) (end 1.25 0.85) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 6a1e7050-f880-4537-90cc-9b437a2d6b11)) + (fp_line (start -2 -0.95) (end -2 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 215bb3b1-290c-4f83-b0a9-2ca62fb569ef)) + (fp_line (start -2 -0.95) (end 2 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp a8ff0a60-6881-45a2-a82b-0f6ffb07133f)) + (fp_line (start -2 0.95) (end 2 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp ef12d01b-38b6-4ac0-8850-b4bd33ee247f)) + (fp_line (start 2 -0.95) (end 2 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 54e2f031-29e1-467c-bbde-5ae7a2204f43)) + (fp_line (start -0.9 -0.7) (end 0.9 -0.7) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 3df2941e-9fb5-45d2-9bd7-f89c6472ce38)) + (fp_line (start -0.9 0.7) (end -0.9 -0.7) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 7e5f0081-e78a-49d7-bf5e-813c3c26fabd)) + (fp_line (start -0.3 -0.35) (end -0.3 0.35) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 22726eec-914a-4e59-bf4b-eb4c6af8c71d)) + (fp_line (start -0.3 0) (end -0.5 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 8749a07d-eede-4e9d-a7ca-01a2a243fe25)) + (fp_line (start -0.3 0) (end 0.2 -0.35) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 945d24da-2251-43c5-b3ec-37b9bdb78e8f)) + (fp_line (start 0.2 -0.35) (end 0.2 0.35) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp f5cb1edb-ed23-4ce2-8215-26d59116c299)) + (fp_line (start 0.2 0) (end 0.45 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 56026baf-5dfd-4a74-aaa1-0d428eb72380)) + (fp_line (start 0.2 0.35) (end -0.3 0) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 71a1961d-5016-4a41-8729-cdfbf0cc8d9f)) + (fp_line (start 0.9 -0.7) (end 0.9 0.7) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp e5455139-f86a-4e19-a060-289565741047)) + (fp_line (start 0.9 0.7) (end -0.9 0.7) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 36f4c8a7-af78-4f42-b23d-e1b4826d3219)) + (pad "1" smd roundrect (at -1.25 0 270) (size 1 1) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 16 "Net-(D5-K)") (pinfunction "K") (pintype "passive") (tstamp 2a49b770-66db-4d72-b6d1-a4e3b7b67124)) + (pad "2" smd roundrect (at 1.25 0 270) (size 1 1) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 14 "Net-(D4-K)") (pinfunction "A") (pintype "passive") (tstamp 5cd1762e-0daf-49bf-a47c-e826ec132e81)) + (model "${KICAD6_3DMODEL_DIR}/Diode_SMD.3dshapes/D_SOD-323.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Capacitor_SMD:C_0805_2012Metric" (layer "F.Cu") + (tstamp f61507c2-190d-480e-aea2-9d1088d863eb) + (at 149.813 80.918 90) + (descr "Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator") + (tags "capacitor") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Unpolarized capacitor, small symbol") + (property "ki_keywords" "capacitor cap") + (path "/64d18be6-1726-4a48-97de-1ac14b863194") + (attr smd) + (fp_text reference "C6" (at -0.108 -1.985 180) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 9cb0b7ff-7e7b-4990-a043-2712e4c0503b) + ) + (fp_text value "100nF 100V" (at 0 1.68 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 54908e45-80ba-4de3-b30e-61e00095c8a5) + ) + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.08))) + (tstamp 7edbef8d-bb70-4c01-84b2-e3c78c810f09) + ) + (fp_line (start -0.261252 -0.735) (end 0.261252 -0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 1d8fd95f-7740-4089-8ec8-77020af6ea4d)) + (fp_line (start -0.261252 0.735) (end 0.261252 0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 7ee65114-1328-40f1-b84c-b884be6eab44)) + (fp_line (start -1.7 -0.98) (end 1.7 -0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp c7cfd7de-2330-4c57-b127-e9f05aec94d6)) + (fp_line (start -1.7 0.98) (end -1.7 -0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 2e41c0eb-487d-4678-886b-79f66f899c2a)) + (fp_line (start 1.7 -0.98) (end 1.7 0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 6a31e536-7de1-44aa-a2c1-24a51705e83b)) + (fp_line (start 1.7 0.98) (end -1.7 0.98) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp e3109779-2b72-4507-a99d-82d4c79cd21d)) + (fp_line (start -1 -0.625) (end 1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp b9750ab7-306a-4751-be70-e9eedff22fe9)) + (fp_line (start -1 0.625) (end -1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp d19c8ddf-7962-4fd0-9bf2-5d77bbf78152)) + (fp_line (start 1 -0.625) (end 1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp c3a0d34d-72ed-4319-81fa-e926a5832810)) + (fp_line (start 1 0.625) (end -1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 75faac63-de34-4b41-8e8b-5ea20ffb3431)) + (pad "1" smd roundrect (at -0.95 0 90) (size 1 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 37 "GNDREF") (pintype "passive") (tstamp 1d8df4d3-11ba-4f3e-8f5b-6401472847e0)) + (pad "2" smd roundrect (at 0.95 0 90) (size 1 1.45) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 6 "+6V") (pintype "passive") (tstamp b7a21463-7440-41fe-87cf-6412ba3a67ce)) + (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/C_0805_2012Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Capacitor_SMD:CP_Elec_8x10.5" (layer "F.Cu") + (tstamp fa85c57a-ce81-41c1-8a78-a5cc1e9ffed0) + (at 147.447 114.681 90) + (descr "SMD capacitor, aluminum electrolytic, Vishay 0810, 8.0x10.5mm, http://www.vishay.com/docs/28395/150crz.pdf") + (tags "capacitor electrolytic") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Polarized capacitor, small symbol") + (property "ki_keywords" "cap capacitor") + (path "/42f430af-cbee-4b73-afe5-b6d6dbc870a2") + (attr smd) + (fp_text reference "C2" (at 0 -5.588 180) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 296d5115-bb0c-47c6-999f-c69408840ad1) + ) + (fp_text value "47uF" (at 0 5.3 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp c0208b14-d3a4-4fb7-ba5d-6f18733de2a0) + ) + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 189b4727-0ccc-49be-83a5-fdaa8e2a33c9) + ) + (fp_line (start -5.6 -2.51) (end -4.6 -2.51) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 23eef88f-c1a0-45a8-b10c-819825c8ae51)) + (fp_line (start -5.1 -3.01) (end -5.1 -2.01) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 02cef54a-0c10-4597-9043-d3d1dcace94a)) + (fp_line (start -4.36 -3.295563) (end -4.36 -1.51) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 61f2fb0d-33cc-4da1-adaf-bf3ee27e4509)) + (fp_line (start -4.36 -3.295563) (end -3.295563 -4.36) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 8b23b899-7f82-4b40-8e07-fd25e4fcfb6f)) + (fp_line (start -4.36 3.295563) (end -4.36 1.51) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 0283fcf5-17b1-48eb-afe0-1cebc2dcb79c)) + (fp_line (start -4.36 3.295563) (end -3.295563 4.36) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 535d2e0f-247f-4e44-a143-c59da04e3d48)) + (fp_line (start -3.295563 -4.36) (end 4.36 -4.36) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 7c318f23-6a80-4ed0-8739-75bac23b843a)) + (fp_line (start -3.295563 4.36) (end 4.36 4.36) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp bc6ace50-e8ab-4aac-9f28-99324973ddbf)) + (fp_line (start 4.36 -4.36) (end 4.36 -1.51) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 3e7a268f-272b-4097-972f-349899193524)) + (fp_line (start 4.36 4.36) (end 4.36 1.51) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 08098a37-a29c-4603-8284-6f5dfde7411c)) + (fp_line (start -6.15 -1.5) (end -6.15 1.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 09531e91-7907-4d23-b324-cd8b67af4d57)) + (fp_line (start -6.15 1.5) (end -4.5 1.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 86d37c7e-6e74-47cf-8d70-067553cc2371)) + (fp_line (start -4.5 -3.35) (end -4.5 -1.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 0c98e35a-8696-4e8d-ac92-ed1052b70fa4)) + (fp_line (start -4.5 -3.35) (end -3.35 -4.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 4678904a-bf4a-478b-8b24-9b2ebbe3e0ce)) + (fp_line (start -4.5 -1.5) (end -6.15 -1.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 483a08f3-114a-4342-a651-a3ebe45dbda7)) + (fp_line (start -4.5 1.5) (end -4.5 3.35) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 37e0967b-2b5f-446d-b0b5-907e945cad5e)) + (fp_line (start -4.5 3.35) (end -3.35 4.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 2a0357eb-7c75-40a9-8531-cbc31b67ba48)) + (fp_line (start -3.35 -4.5) (end 4.5 -4.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 192304bc-5a12-4c27-a2bb-cd06d45fdad3)) + (fp_line (start -3.35 4.5) (end 4.5 4.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 9c3d2115-8d55-47ba-bffa-306bd49c412c)) + (fp_line (start 4.5 -4.5) (end 4.5 -1.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 37467103-46af-4897-a056-1678475ab3db)) + (fp_line (start 4.5 -1.5) (end 6.15 -1.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp ba795752-f61e-4bb1-8098-5a4f9c7c9bff)) + (fp_line (start 4.5 1.5) (end 4.5 4.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 1918d760-c216-4a59-ac05-e8ecb4c8ce79)) + (fp_line (start 6.15 -1.5) (end 6.15 1.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp cb9217ba-9867-4ff6-81df-36d363f88b2a)) + (fp_line (start 6.15 1.5) (end 4.5 1.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp af8b050a-8aef-45e3-89ce-381ce4ef881f)) + (fp_line (start -4.25 -3.25) (end -4.25 3.25) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 1c43ec8f-9f4c-4d24-88be-cc772f49559b)) + (fp_line (start -4.25 -3.25) (end -3.25 -4.25) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp b5e39ea5-1851-4594-b52f-e9cb31f33547)) + (fp_line (start -4.25 3.25) (end -3.25 4.25) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 3b397a7a-a7f2-4d37-8c75-0c58bc687d06)) + (fp_line (start -3.562278 -1.5) (end -2.762278 -1.5) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 32831502-b000-495e-8017-aedd4934bc49)) + (fp_line (start -3.25 -4.25) (end 4.25 -4.25) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 0e942b97-fedc-4ae1-b4bb-480bb351e334)) + (fp_line (start -3.25 4.25) (end 4.25 4.25) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 38aa2491-565a-409f-8378-d655d631850a)) + (fp_line (start -3.162278 -1.9) (end -3.162278 -1.1) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 7d0fef97-3bfd-4b5b-a8bd-81997330e964)) + (fp_line (start 4.25 -4.25) (end 4.25 4.25) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 796266db-117f-44d3-b4b9-7a1cd10f9c4a)) + (fp_circle (center 0 0) (end 4 0) + (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp 0fa48d7c-3721-412d-9b71-55d556457746)) + (pad "1" smd roundrect (at -3.7 0 90) (size 4.4 2.5) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.1) + (net 3 "Net-(C2-Pad1)") (pintype "passive") (tstamp 9a9ec8e1-a2ce-488b-a68b-eece659376d3)) + (pad "2" smd roundrect (at 3.7 0 90) (size 4.4 2.5) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.1) + (net 4 "Net-(U1A--)") (pintype "passive") (tstamp 594f581d-d465-41c5-9c5e-07e97723821a)) + (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/CP_Elec_8x10.5.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Capacitor_SMD:CP_Elec_8x10.5" (layer "F.Cu") + (tstamp fb44a86d-d846-4e1b-b5dd-80e5e7febf20) + (at 147.447 100.203 -90) + (descr "SMD capacitor, aluminum electrolytic, Vishay 0810, 8.0x10.5mm, http://www.vishay.com/docs/28395/150crz.pdf") + (tags "capacitor electrolytic") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Polarized capacitor, small symbol") + (property "ki_keywords" "cap capacitor") + (path "/72134c57-7423-48a2-97b1-a5a2825f1524") + (attr smd) + (fp_text reference "C5" (at 5.571 4.191 -180) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 01f50361-d79c-43be-93a4-b607f80e54c3) + ) + (fp_text value "47uF" (at 0 5.3 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 2773d52b-44a9-4427-b739-423c63048b66) + ) + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 288851c2-5075-4aa3-b782-82cf26bf9e0e) + ) + (fp_line (start -5.6 -2.51) (end -4.6 -2.51) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 25eacaa6-23a1-4f1b-a761-c568217ddd2e)) + (fp_line (start -5.1 -3.01) (end -5.1 -2.01) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp db5dca0b-8c0a-4bd3-84a0-d8ade79f8418)) + (fp_line (start -4.36 -3.295563) (end -4.36 -1.51) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 2dd04b47-dfc5-4bd4-8136-270c91061daa)) + (fp_line (start -4.36 -3.295563) (end -3.295563 -4.36) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 17f2279b-eb23-4ea8-8242-cac524e2bcf5)) + (fp_line (start -4.36 3.295563) (end -4.36 1.51) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 9b290d1f-381a-4915-afb4-1102870b177f)) + (fp_line (start -4.36 3.295563) (end -3.295563 4.36) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 722a53de-7570-412f-81f8-75365a0af1fe)) + (fp_line (start -3.295563 -4.36) (end 4.36 -4.36) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp a767b46d-8d73-4bcf-9177-e8d4fd7e3d80)) + (fp_line (start -3.295563 4.36) (end 4.36 4.36) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 3d06980f-5560-4620-947a-6a87528105bc)) + (fp_line (start 4.36 -4.36) (end 4.36 -1.51) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 11a8530c-d1b7-4106-aa9a-9b9a3ef32b35)) + (fp_line (start 4.36 4.36) (end 4.36 1.51) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 61fb367d-0cdd-4044-a1ca-53ffddcac5ad)) + (fp_line (start -6.15 -1.5) (end -6.15 1.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 4c8f9236-0f3f-4a08-81fb-d3614dbe4348)) + (fp_line (start -6.15 1.5) (end -4.5 1.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 8b4b5e87-6461-4a7f-aa53-429bee2737df)) + (fp_line (start -4.5 -3.35) (end -4.5 -1.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 47b9e2dc-f58c-45c3-9c69-26be45d5e8ff)) + (fp_line (start -4.5 -3.35) (end -3.35 -4.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 368ed711-a098-4f59-81b5-1da0ac3eaf7a)) + (fp_line (start -4.5 -1.5) (end -6.15 -1.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp c690cef5-0096-448e-aaec-c4578d8ba67b)) + (fp_line (start -4.5 1.5) (end -4.5 3.35) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp a0931a6c-f5d1-49f5-965a-700c16d44013)) + (fp_line (start -4.5 3.35) (end -3.35 4.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp e34552e2-7378-4455-816e-a778afbc65e2)) + (fp_line (start -3.35 -4.5) (end 4.5 -4.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp e585ee12-2039-447e-98fe-96d64ed2a9ee)) + (fp_line (start -3.35 4.5) (end 4.5 4.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp feef8c01-4bb2-4959-9bf2-ffb9953f28ed)) + (fp_line (start 4.5 -4.5) (end 4.5 -1.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 03d238d8-42c4-477d-b324-71e3899b2bd1)) + (fp_line (start 4.5 -1.5) (end 6.15 -1.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp df8c4643-e650-4fc1-89fd-04e741b6eea4)) + (fp_line (start 4.5 1.5) (end 4.5 4.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 21614d78-c116-4505-8e3a-965770805e48)) + (fp_line (start 6.15 -1.5) (end 6.15 1.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 74ba158f-87eb-46b3-a5b2-6c1a3fdb5b29)) + (fp_line (start 6.15 1.5) (end 4.5 1.5) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp be16b7e9-8491-4a2a-bd7f-93762da48353)) + (fp_line (start -4.25 -3.25) (end -4.25 3.25) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 987b17c9-39a3-4f00-9ef6-fd2861b672b9)) + (fp_line (start -4.25 -3.25) (end -3.25 -4.25) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp a54116dd-cbca-4c42-ad67-8fe037a08f4e)) + (fp_line (start -4.25 3.25) (end -3.25 4.25) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 81ba2c8d-b038-49ad-9db7-d3a2f843fbd4)) + (fp_line (start -3.562278 -1.5) (end -2.762278 -1.5) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 94e1fee3-0968-4734-b582-a1d7e8daa7cc)) + (fp_line (start -3.25 -4.25) (end 4.25 -4.25) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp b7002b1d-f9d1-45d3-98f2-33ecf365da86)) + (fp_line (start -3.25 4.25) (end 4.25 4.25) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 3aa36fb8-199f-4ee0-b9cb-edfd2b86dfa0)) + (fp_line (start -3.162278 -1.9) (end -3.162278 -1.1) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp a0d1800a-848f-4f1c-86f6-fafc635e5275)) + (fp_line (start 4.25 -4.25) (end 4.25 4.25) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp ab04f0fe-8ce1-423d-b70e-3328af98a472)) + (fp_circle (center 0 0) (end 4 0) + (stroke (width 0.1) (type solid)) (fill none) (layer "F.Fab") (tstamp d812654f-de79-4c3c-b557-6b1393f348c2)) + (pad "1" smd roundrect (at -3.7 0 270) (size 4.4 2.5) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.1) + (net 6 "+6V") (pintype "passive") (tstamp fb9dfc8a-7be4-458a-b9ea-6f86ce23f7bd)) + (pad "2" smd roundrect (at 3.7 0 270) (size 4.4 2.5) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.1) + (net 37 "GNDREF") (pintype "passive") (tstamp 74df1e97-aa2d-4bce-b3d2-aac8469af187)) + (model "${KICAD6_3DMODEL_DIR}/Capacitor_SMD.3dshapes/CP_Elec_8x10.5.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "kibuzzard-640955DC" (layer "F.Cu") + (tstamp fba2eacb-3232-4aac-a9fa-e5db7339509b) + (at 157.607 125.857) + (descr "Generated with KiBuzzard") + (tags "kb_params=eyJBbGlnbm1lbnRDaG9pY2UiOiAiQ2VudGVyIiwgIkNhcExlZnRDaG9pY2UiOiAiKCIsICJDYXBSaWdodENob2ljZSI6ICIpIiwgIkZvbnRDb21ib0JveCI6ICJGcmVkb2thT25lIiwgIkhlaWdodEN0cmwiOiAiMSIsICJMYXllckNvbWJvQm94IjogIkYuU2lsa1MiLCAiTXVsdGlMaW5lVGV4dCI6ICIzIiwgIlBhZGRpbmdCb3R0b21DdHJsIjogIjUiLCAiUGFkZGluZ0xlZnRDdHJsIjogIjIiLCAiUGFkZGluZ1JpZ2h0Q3RybCI6ICIyIiwgIlBhZGRpbmdUb3BDdHJsIjogIjUiLCAiV2lkdGhDdHJsIjogIiJ9") + (attr board_only exclude_from_pos_files exclude_from_bom) + (fp_text reference "kibuzzard-640955DC" (at 0 -3.979598) (layer "F.SilkS") hide + (effects (font (size 0 0) (thickness 0.15))) + (tstamp 0c92b983-d417-40ac-b4b6-7244eb7d70d4) + ) + (fp_text value "G***" (at 0 3.979598) (layer "F.SilkS") hide + (effects (font (size 0 0) (thickness 0.15))) + (tstamp bde82bf3-9b7e-4bd5-86c9-f958f111190e) + ) + (fp_poly + (pts + (xy -0.442912 -0.931598) + (xy -0.575204 -0.931598) + (xy -0.666517 -0.927112) + (xy -0.75695 -0.913698) + (xy -0.845633 -0.891484) + (xy -0.931711 -0.860684) + (xy -1.014356 -0.821596) + (xy -1.092772 -0.774595) + (xy -1.166204 -0.720135) + (xy -1.233943 -0.658739) + (xy -1.295339 -0.590999) + (xy -1.3498 -0.517568) + (xy -1.3968 -0.439152) + (xy -1.435888 -0.356507) + (xy -1.466688 -0.270429) + (xy -1.488902 -0.181746) + (xy -1.502316 -0.091313) + (xy -1.506802 0) + (xy -1.502316 0.091313) + (xy -1.488902 0.181746) + (xy -1.466688 0.270429) + (xy -1.435888 0.356507) + (xy -1.3968 0.439152) + (xy -1.3498 0.517568) + (xy -1.295339 0.590999) + (xy -1.233943 0.658739) + (xy -1.166204 0.720135) + (xy -1.092772 0.774595) + (xy -1.014356 0.821596) + (xy -0.931711 0.860684) + (xy -0.845633 0.891484) + (xy -0.75695 0.913698) + (xy -0.666517 0.927112) + (xy -0.575204 0.931598) + (xy -0.442912 0.931598) + (xy -0.003175 0.931598) + (xy -0.003175 0.600869) + (xy -0.123119 0.588522) + (xy -0.228953 0.55148) + (xy -0.320675 0.489744) + (xy -0.365522 0.440134) + (xy -0.404812 0.377031) + (xy -0.422275 0.335756) + (xy -0.42545 0.319881) + (xy -0.442912 0.234156) + (xy -0.404019 0.1651) + (xy -0.287337 0.142081) + (xy -0.2032 0.157956) + (xy -0.155575 0.240506) + (xy -0.068262 0.316706) + (xy -0.001587 0.326231) + (xy 0.071438 0.317698) + (xy 0.122238 0.2921) + (xy 0.161925 0.215106) + (xy 0.123031 0.1397) + (xy 0.030956 0.107156) + (xy -0.041275 0.103981) + (xy -0.08255 0.088106) + (xy -0.114697 0.047228) + (xy -0.125412 -0.034131) + (xy -0.110728 -0.122634) + (xy -0.066675 -0.165894) + (xy 0.015875 -0.173831) + (xy 0.106363 -0.189309) + (xy 0.136525 -0.235744) + (xy 0.104775 -0.299244) + (xy 0.016669 -0.329406) + (xy -0.073025 -0.310356) + (xy -0.1143 -0.272256) + (xy -0.123825 -0.253206) + (xy -0.168275 -0.193675) + (xy -0.2286 -0.173831) + (xy -0.315912 -0.202406) + (xy -0.375444 -0.252016) + (xy -0.395287 -0.308769) + (xy -0.358775 -0.416719) + (xy -0.32385 -0.466725) + (xy -0.257969 -0.529431) + (xy -0.153194 -0.578644) + (xy -0.081955 -0.595313) + (xy -0.003175 -0.600869) + (xy 0.117828 -0.588522) + (xy 0.220486 -0.55148) + (xy 0.3048 -0.489744) + (xy 0.367418 -0.412574) + (xy 0.404989 -0.32923) + (xy 0.417513 -0.239713) + (xy 0.403754 -0.155663) + (xy 0.362479 -0.088724) + (xy 0.293688 -0.038894) + (xy 0.293688 -0.027781) + (xy 0.340519 0.00635) + (xy 0.390525 0.057944) + (xy 0.429816 0.129381) + (xy 0.442913 0.210344) + (xy 0.428801 0.316971) + (xy 0.386468 0.410369) + (xy 0.315913 0.490537) + (xy 0.224014 0.551833) + (xy 0.117651 0.58861) + (xy -0.003175 0.600869) + (xy -0.003175 0.931598) + (xy 0.442913 0.931598) + (xy 0.575204 0.931598) + (xy 0.666517 0.927112) + (xy 0.75695 0.913698) + (xy 0.845633 0.891484) + (xy 0.931711 0.860684) + (xy 1.014356 0.821596) + (xy 1.092772 0.774595) + (xy 1.166204 0.720135) + (xy 1.233943 0.658739) + (xy 1.295339 0.590999) + (xy 1.3498 0.517568) + (xy 1.3968 0.439152) + (xy 1.435888 0.356507) + (xy 1.466688 0.270429) + (xy 1.488902 0.181746) + (xy 1.502316 0.091313) + (xy 1.506802 0) + (xy 1.502316 -0.091313) + (xy 1.488902 -0.181746) + (xy 1.466688 -0.270429) + (xy 1.435888 -0.356507) + (xy 1.3968 -0.439152) + (xy 1.3498 -0.517568) + (xy 1.295339 -0.590999) + (xy 1.233943 -0.658739) + (xy 1.166204 -0.720135) + (xy 1.092772 -0.774595) + (xy 1.014356 -0.821596) + (xy 0.931711 -0.860684) + (xy 0.845633 -0.891484) + (xy 0.75695 -0.913698) + (xy 0.666517 -0.927112) + (xy 0.575204 -0.931598) + (xy 0.442913 -0.931598) + (xy -0.442912 -0.931598) + ) + + (stroke (width 0) (type solid)) (fill solid) (layer "F.SilkS") (tstamp 705ce04a-15dc-4f1f-9d41-57a7ae89383b)) + ) + + (footprint "Resistor_SMD:R_0805_2012Metric" (layer "F.Cu") + (tstamp ffac11f0-1942-4472-8501-3b79f69efda2) + (at 144.526 67.564 90) + (descr "Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator") + (tags "resistor") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Resistor, small symbol") + (property "ki_keywords" "R resistor") + (path "/854201a5-eacd-4a22-ba23-6067dc147469") + (attr smd) + (fp_text reference "R110" (at 0 -1.65 90) (layer "F.SilkS") hide + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 4b112ca0-6823-4055-bb5c-c9d2800fbc64) + ) + (fp_text value "100M" (at 0 1.65 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp d285fc43-36d9-435f-8ee2-e138120ad0c5) + ) + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") + (effects (font (size 0.5 0.5) (thickness 0.08))) + (tstamp be81d701-0990-4b7e-ac45-d62318eaad04) + ) + (fp_line (start -0.227064 -0.735) (end 0.227064 -0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 88f1a2ba-51a1-40df-8ba6-d072ea59f91b)) + (fp_line (start -0.227064 0.735) (end 0.227064 0.735) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 88cd6828-86cc-4412-92cd-2c0335dd3de9)) + (fp_line (start -1.68 -0.95) (end 1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp c52524af-d968-439b-8f70-8c34fb02c29b)) + (fp_line (start -1.68 0.95) (end -1.68 -0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 6451ce6d-62dc-40fd-b094-74c15d8969ba)) + (fp_line (start 1.68 -0.95) (end 1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp dad8478f-e7ce-4448-af82-22d811dc4602)) + (fp_line (start 1.68 0.95) (end -1.68 0.95) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 38a5a410-ea38-49d1-ac7d-c5d78cffbfec)) + (fp_line (start -1 -0.625) (end 1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp f12d5b9f-29e9-4d3e-873e-94202c5a2e4f)) + (fp_line (start -1 0.625) (end -1 -0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp e09f609e-2070-49f3-8622-44b66909355f)) + (fp_line (start 1 -0.625) (end 1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp c404bc05-f9e5-4714-9126-4a75f640f731)) + (fp_line (start 1 0.625) (end -1 0.625) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp e321411d-5fb6-4f13-9827-5eef1caaa1ee)) + (pad "1" smd roundrect (at -0.9125 0 90) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 36 "Net-(R109-Pad2)") (pintype "passive") (tstamp 82f2e02c-17c2-4358-bae1-21d4b1ddb44c)) + (pad "2" smd roundrect (at 0.9125 0 90) (size 1.025 1.4) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.243902439) + (net 7 "GNDA") (pintype "passive") (tstamp b6ef6dba-71f4-4525-8a10-f1cb3254e9b3)) + (model "${KICAD6_3DMODEL_DIR}/Resistor_SMD.3dshapes/R_0805_2012Metric.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (footprint "Package_SO:SOIC-8_3.9x4.9mm_P1.27mm" (layer "F.Cu") + (tstamp ffefea6b-87f9-420a-9c94-b0109fabab17) + (at 149.3285 64.535 -90) + (descr "SOIC, 8 Pin (JEDEC MS-012AA, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/soic_narrow-r/r_8.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py") + (tags "SOIC SO") + (property "Sheetfile" "StudioMic.kicad_sch") + (property "Sheetname" "") + (property "ki_description" "Dual SoundPlus High Performance, Bipolar-Input Audio Operational Amplifiers, SOIC-8") + (property "ki_keywords" "dual opamp") + (path "/684e09ce-08f2-4138-bd55-7a7800ff2cbf") + (attr smd) + (fp_text reference "U1" (at 1.778 -3.5795 -180) (layer "F.SilkS") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp d144f575-7e7a-499f-8fc1-3a7decf6643e) + ) + (fp_text value "OPA1652 " (at 0 3.4 90) (layer "F.Fab") + (effects (font (size 1 1) (thickness 0.15))) + (tstamp 595cb34c-c3bc-4f33-9620-4f81cba397da) + ) + (fp_text user "${REFERENCE}" (at 0 0 90) (layer "F.Fab") + (effects (font (size 0.98 0.98) (thickness 0.15))) + (tstamp 91beecac-d6fa-46a0-b190-b7299630b2a9) + ) + (fp_line (start 0 -2.56) (end -3.45 -2.56) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 2f30a949-42ce-47c4-bc04-a9b117a701ff)) + (fp_line (start 0 -2.56) (end 1.95 -2.56) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 095a3636-9e55-4134-9e18-b93471236956)) + (fp_line (start 0 2.56) (end -1.95 2.56) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 0c62b691-d7a1-4592-938e-45213aa8e55d)) + (fp_line (start 0 2.56) (end 1.95 2.56) + (stroke (width 0.12) (type solid)) (layer "F.SilkS") (tstamp 14c779b8-5ded-45d5-89bf-ca17c0661fb0)) + (fp_line (start -3.7 -2.7) (end -3.7 2.7) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 832f37d1-90e0-4850-a9c9-090f836d5958)) + (fp_line (start -3.7 2.7) (end 3.7 2.7) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp b8da1a27-e303-4f3b-be56-da52ecb38381)) + (fp_line (start 3.7 -2.7) (end -3.7 -2.7) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 82090a76-013b-4101-815c-95d2ffb594d4)) + (fp_line (start 3.7 2.7) (end 3.7 -2.7) + (stroke (width 0.05) (type solid)) (layer "F.CrtYd") (tstamp 47e91f41-1f79-45aa-beb5-7f4b4f2b8bf4)) + (fp_line (start -1.95 -1.475) (end -0.975 -2.45) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp dbba39a7-e0fd-47db-ae62-d65b6f54ce6d)) + (fp_line (start -1.95 2.45) (end -1.95 -1.475) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 23bdf7e0-de81-4707-a942-f7004a0d22c5)) + (fp_line (start -0.975 -2.45) (end 1.95 -2.45) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 7903f4a1-65a4-40a3-bd33-64cb7c879a34)) + (fp_line (start 1.95 -2.45) (end 1.95 2.45) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 56fe6151-7f90-499a-996b-62a2bd5cadae)) + (fp_line (start 1.95 2.45) (end -1.95 2.45) + (stroke (width 0.1) (type solid)) (layer "F.Fab") (tstamp 9560ba32-88a3-4cb9-8729-c398366e262a)) + (pad "1" smd roundrect (at -2.475 -1.905 270) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 4 "Net-(U1A--)") (pintype "output") (tstamp 41aeec33-dbf7-43aa-8257-a99383585a6d)) + (pad "2" smd roundrect (at -2.475 -0.635 270) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 4 "Net-(U1A--)") (pinfunction "-") (pintype "input") (tstamp dabeaca3-db08-4850-b178-d21e3a7107b9)) + (pad "3" smd roundrect (at -2.475 0.635 270) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 26 "Net-(U1A-+)") (pinfunction "+") (pintype "input") (tstamp b89945ac-a459-4f9b-bf1c-6ab21cbcf104)) + (pad "4" smd roundrect (at -2.475 1.905 270) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 37 "GNDREF") (pinfunction "V-") (pintype "power_in") (tstamp 5696451f-9d0e-4381-b103-dc301cf48040)) + (pad "5" smd roundrect (at 2.475 1.905 270) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 7 "GNDA") (pinfunction "+") (pintype "input") (tstamp e2d0b101-a125-4029-a170-cd5223bb6af7)) + (pad "6" smd roundrect (at 2.475 0.635 270) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 27 "Net-(U1B--)") (pinfunction "-") (pintype "input") (tstamp 0f694d02-f05a-44e4-a683-16ae8b9a6895)) + (pad "7" smd roundrect (at 2.475 -0.635 270) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 2 "Net-(C1-Pad2)") (pintype "output") (tstamp 46bfb6c1-0efe-457f-bead-b5542c72e40a)) + (pad "8" smd roundrect (at 2.475 -1.905 270) (size 1.95 0.6) (layers "F.Cu" "F.Paste" "F.Mask") (roundrect_rratio 0.25) + (net 6 "+6V") (pinfunction "V+") (pintype "power_in") (tstamp 68c2ed1f-826f-49fd-ba80-000d10ac3d50)) + (model "${KICAD6_3DMODEL_DIR}/Package_SO.3dshapes/SOIC-8_3.9x4.9mm_P1.27mm.wrl" + (offset (xyz 0 0 0)) + (scale (xyz 1 1 1)) + (rotate (xyz 0 0 0)) + ) + ) + + (gr_line (start 135.128 55.499) (end 137.16 55.499) + (stroke (width 0.15) (type default)) (layer "F.SilkS") (tstamp 1c907382-b10d-4315-8270-d3030b156bc3)) + (gr_line (start 161.036 82.061) (end 161.036 80.156) + (stroke (width 0.15) (type default)) (layer "F.SilkS") (tstamp 1f22a458-655c-4b55-88fb-12a48c2cda1b)) + (gr_line (start 167.132 62.122) (end 167.132 62.757) + (stroke (width 0.15) (type default)) (layer "F.SilkS") (tstamp 23eae713-c083-47df-9b5b-25ddedd8b64e)) + (gr_line (start 145.542 65.913) (end 145.542 74.676) + (stroke (width 0.15) (type default)) (layer "F.SilkS") (tstamp 26ee5479-ef78-4eee-988a-277a6bd90507)) + (gr_line (start 167.386 63.519) (end 166.116 63.519) + (stroke (width 0.15) (type default)) (layer "F.SilkS") (tstamp 308ad2b6-8fd2-472b-a18b-678987e26093)) + (gr_line (start 167.386 64.535) (end 165.989 64.535) + (stroke (width 0.15) (type default)) (layer "F.SilkS") (tstamp 33145e52-1d81-4407-b52c-e507dc5dbc26)) + (gr_line (start 161.036 80.156) (end 160.825174 80.366826) + (stroke (width 0.15) (type default)) (layer "F.SilkS") (tstamp 3716f90d-4880-4d70-8f08-2d9d48d12dde)) + (gr_line (start 145.542 74.676) (end 135.128 74.676) + (stroke (width 0.15) (type default)) (layer "F.SilkS") (tstamp 395b0f97-556e-4e79-9d8e-4f63a61ff063)) + (gr_line (start 151.257 54.737) (end 151.257 55.245) + (stroke (width 0.15) (type solid)) (layer "F.SilkS") (tstamp 472728c8-fa39-4c03-a84b-8e31a9eaa38f)) + (gr_circle (center 167.144 51.396884) (end 164.878385 51.435) + (stroke (width 0.15) (type default)) (fill none) (layer "F.SilkS") (tstamp 4bc80057-0489-48ed-a67e-d01b97480ca4)) + (gr_line (start 161.036 80.156) (end 161.246826 80.366826) + (stroke (width 0.15) (type default)) (layer "F.SilkS") (tstamp 5a2d5d81-b358-4554-a586-ed279972a594)) + (gr_line (start 139.827 56.388) (end 140.208 56.388) + (stroke (width 0.15) (type solid)) (layer "F.SilkS") (tstamp 5bb0c855-04fb-416c-bfe2-873ae12a37f5)) + (gr_circle (center 138.143615 51.396884) (end 135.89 51.435) + (stroke (width 0.15) (type default)) (fill none) (layer "F.SilkS") (tstamp 7daf9a06-5178-4a87-b536-12e871472749)) + (gr_line (start 167.513 61.741) (end 167.132 62.122) + (stroke (width 0.15) (type default)) (layer "F.SilkS") (tstamp 856fccce-858c-487c-b724-53ca9180bc7f)) + (gr_line (start 165.354 66.186) (end 164.846 66.694) + (stroke (width 0.15) (type default)) (layer "F.SilkS") (tstamp 86a24198-8d9d-4a34-a798-5d951429a19e)) + (gr_line (start 166.624 63.265) (end 164.211 63.265) + (stroke (width 0.15) (type default)) (layer "F.SilkS") (tstamp 86c86617-c960-48d5-90f3-2c979c56aba9)) + (gr_line (start 143.51 65.913) (end 145.542 65.913) + (stroke (width 0.15) (type default)) (layer "F.SilkS") (tstamp 8edfdf34-7222-4c8c-89cb-abee35adc4c6)) + (gr_line (start 165.989 64.535) (end 165.354 65.17) + (stroke (width 0.15) (type default)) (layer "F.SilkS") (tstamp 8f693271-6dd7-448b-8952-f732a6e1d0c6)) + (gr_line (start 143.51 72.644) (end 137.16 72.644) + (stroke (width 0.15) (type default)) (layer "F.SilkS") (tstamp a870f081-4b39-419f-8b19-a7c5ef6755da)) + (gr_line (start 135.128 74.676) (end 135.128 55.499) + (stroke (width 0.15) (type default)) (layer "F.SilkS") (tstamp a8f307d5-850e-4e98-aa5d-608527a0a17b)) + (gr_circle (center 155.956 75.946) (end 156.21 75.946) + (stroke (width 0.15) (type solid)) (fill solid) (layer "F.SilkS") (tstamp b0ccdc87-39eb-4f0b-b479-0a22079fa550)) + (gr_line (start 143.51 72.644) (end 143.51 65.913) + (stroke (width 0.15) (type default)) (layer "F.SilkS") (tstamp b23ab59a-2172-413f-94f7-d6af9ae3cc62)) + (gr_line (start 139.827 58.166) (end 139.827 56.388) + (stroke (width 0.15) (type solid)) (layer "F.SilkS") (tstamp c0c74df3-91c9-47b6-9916-44c4fcc4e3b2)) + (gr_circle (center 151.892 60.452) (end 152.146 60.452) + (stroke (width 0.15) (type solid)) (fill solid) (layer "F.SilkS") (tstamp c7f3ae6f-ee97-49d0-9cde-33bd47cc7c8d)) + (gr_line (start 167.132 62.757) (end 166.624 63.265) + (stroke (width 0.15) (type default)) (layer "F.SilkS") (tstamp d04c2d1a-791c-409f-8170-fa76a63d5bf1)) + (gr_line (start 166.116 63.519) (end 165.1 64.535) + (stroke (width 0.15) (type default)) (layer "F.SilkS") (tstamp d0fa4c83-6e02-4fa7-8d11-d15e79500daf)) + (gr_line (start 137.16 72.644) (end 137.16 55.499) + (stroke (width 0.15) (type default)) (layer "F.SilkS") (tstamp f5ca6b09-0f59-484d-9299-1ddc51f2380c)) + (gr_line (start 165.354 65.17) (end 165.354 66.186) + (stroke (width 0.15) (type default)) (layer "F.SilkS") (tstamp f7c731cf-310f-42d8-b564-b79404a9a0ea)) + (gr_line (start 161.036 82.442) (end 161.036 82.061) + (stroke (width 0.15) (type default)) (layer "F.SilkS") (tstamp f8cb3abe-3e3a-46db-829e-cfbab3e06d94)) + (gr_line (start 132.193891 49.373211) (end 135.572384 130.138884) + (stroke (width 0.1) (type default)) (layer "Edge.Cuts") (tstamp 02ff8dfe-9db1-4daf-84ad-6949e9c0a420)) + (gr_line (start 133.470225 48.096877) (end 171.816501 48.096877) + (stroke (width 0.1) (type default)) (layer "Edge.Cuts") (tstamp 2b59b2b2-1c3b-456a-bbc3-444f43bb3776)) + (gr_line (start 173.092835 49.373211) (end 169.735615 130.140653) + (stroke (width 0.1) (type default)) (layer "Edge.Cuts") (tstamp 426d2315-ed73-424c-ba0a-46eea12d0dd5)) + (gr_arc (start 135.664384 130.138884) (mid 137.754755 131.004744) (end 138.620615 133.095115) + (stroke (width 0.1) (type default)) (layer "Edge.Cuts") (tstamp 53cc0690-574b-45ba-9ad3-9c71a440ed57)) + (gr_arc (start 166.687384 133.096884) (mid 167.553244 131.006513) (end 169.643615 130.140653) + (stroke (width 0.1) (type default)) (layer "Edge.Cuts") (tstamp 6fc80e42-6f1d-4d30-968b-320283bd9efb)) + (gr_line (start 169.643615 130.140653) (end 169.735615 130.140653) + (stroke (width 0.1) (type default)) (layer "Edge.Cuts") (tstamp c4de496b-23ed-4cbc-8706-1cc85e2f0c25)) + (gr_arc (start 132.193891 49.373211) (mid 132.567721 48.470707) (end 133.470225 48.096877) + (stroke (width 0.1) (type default)) (layer "Edge.Cuts") (tstamp c9d84a9d-9008-4849-9de3-da396373f285)) + (gr_line (start 138.620615 133.095115) (end 166.687384 133.096884) + (stroke (width 0.1) (type default)) (layer "Edge.Cuts") (tstamp cb8f74af-cc8f-4986-bf8f-069d73743d5a)) + (gr_line (start 135.664384 130.138884) (end 135.572384 130.138884) + (stroke (width 0.1) (type default)) (layer "Edge.Cuts") (tstamp de514e76-db8c-4c66-8e23-6cb6aa87b2dd)) + (gr_arc (start 171.816501 48.096877) (mid 172.719005 48.470707) (end 173.092835 49.373211) + (stroke (width 0.1) (type default)) (layer "Edge.Cuts") (tstamp dee27f10-2511-49a2-8d0b-6ecdde6ae436)) + (gr_line (start 152.654 133.096) (end 152.654 48.096884) + (stroke (width 0.1) (type default)) (layer "User.1") (tstamp d5670994-dddc-4e73-9d72-6a6cc8553d0b)) + (gr_text "R101-R110" (at 135.636 76.708) (layer "F.SilkS") (tstamp 6f596616-b9b0-49fd-9397-d60b0c8f31ea) + (effects (font (size 1 1) (thickness 0.15)) (justify left bottom)) + ) + + (segment (start 160.02 118.11) (end 161.497 118.11) (width 0.4) (layer "F.Cu") (net 1) (tstamp 3f29e0f8-4a25-4b23-8037-11f8219be368)) + (segment (start 157.099 118.5945) (end 157.9645 119.46) (width 0.4) (layer "F.Cu") (net 1) (tstamp 4d10a056-0391-4e40-a95a-3942724434d5)) + (segment (start 157.099 115.968) (end 157.099 118.5945) (width 0.4) (layer "F.Cu") (net 1) (tstamp 5762ad9f-0d39-4122-8571-479a8673c4db)) + (segment (start 157.9645 119.46) (end 158.67 119.46) (width 0.4) (layer "F.Cu") (net 1) (tstamp b11233cd-5891-40e5-a30d-e765d3c446b1)) + (segment (start 158.67 119.46) (end 160.02 118.11) (width 0.4) (layer "F.Cu") (net 1) (tstamp e3afb4c9-fe98-449b-89b0-e2e0b2f76c5b)) + (segment (start 157.099 108.568) (end 155.465 106.934) (width 0.4) (layer "F.Cu") (net 2) (tstamp 26499775-03e4-4b55-b52f-91f69cf29339)) + (segment (start 149.9635 68.933) (end 150.3915 69.361) (width 0.4) (layer "F.Cu") (net 2) (tstamp 7c8ff20c-f05f-4a77-b75f-10b1eb8baa95)) + (segment (start 149.9635 67.01) (end 149.9635 68.933) (width 0.4) (layer "F.Cu") (net 2) (tstamp 8aa5a81c-d34b-4f48-8bd0-86b4ac9fae34)) + (segment (start 150.3915 69.361) (end 150.3915 71.755) (width 0.4) (layer "F.Cu") (net 2) (tstamp a93c6786-a02d-4761-af6c-2212527db508)) + (segment (start 155.465 106.934) (end 151.638 106.934) (width 0.4) (layer "F.Cu") (net 2) (tstamp cf715561-5bbd-4918-9aaa-31c8f94982f8)) + (via (at 150.3915 71.755) (size 2) (drill 1) (layers "F.Cu" "B.Cu") (net 2) (tstamp 06470562-0247-4572-8f34-64c4ad49fd47)) + (via (at 151.638 106.934) (size 2) (drill 1) (layers "F.Cu" "B.Cu") (net 2) (tstamp 3d6d4e97-3519-43c6-8142-b382af944a75)) + (segment (start 152.51899 106.05301) (end 152.51899 83.93899) (width 0.4) (layer "B.Cu") (net 2) (tstamp 215d97c1-41c2-4a17-89a1-32dba84b27fa)) + (segment (start 150.3915 81.8115) (end 150.3915 71.755) (width 0.4) (layer "B.Cu") (net 2) (tstamp 419e523a-6b80-4376-bc5c-88d88a428357)) + (segment (start 152.51899 83.93899) (end 150.3915 81.8115) (width 0.4) (layer "B.Cu") (net 2) (tstamp 5de64e21-364d-4c1f-ba8b-37befd2be926)) + (segment (start 151.638 106.934) (end 152.51899 106.05301) (width 0.4) (layer "B.Cu") (net 2) (tstamp 6e14068e-d953-4a37-bcef-c468729a8cff)) + (segment (start 147.447 118.381) (end 148.209 119.143) (width 0.4) (layer "F.Cu") (net 3) (tstamp 008171e8-9aa6-413a-8ea0-51c1939fb31e)) + (segment (start 155.448 124.968) (end 155.067 124.587) (width 0.4) (layer "F.Cu") (net 3) (tstamp 2c78708e-2bd9-4fa1-8661-75850071e8a4)) + (segment (start 148.209 119.143) (end 152.3135 119.143) (width 0.4) (layer "F.Cu") (net 3) (tstamp 3e5ce115-3c28-4246-9d20-3c21059d5e8c)) + (segment (start 160.655 124.968) (end 155.448 124.968) (width 0.4) (layer "F.Cu") (net 3) (tstamp 4d67e596-35ca-4d43-a735-bbd98d05b98d)) + (segment (start 155.067 121.285) (end 153.242 119.46) (width 0.4) (layer "F.Cu") (net 3) (tstamp 86ef6789-a8ff-4f77-9bcc-0b1fca9aedb3)) + (segment (start 153.242 119.46) (end 152.6305 119.46) (width 0.4) (layer "F.Cu") (net 3) (tstamp 8b177177-76e0-4258-859e-7d0d940631ef)) + (segment (start 155.067 124.587) (end 155.067 121.285) (width 0.4) (layer "F.Cu") (net 3) (tstamp d0638ca1-adb1-4ea1-82b4-c16617aa8f2a)) + (segment (start 161.497 120.396) (end 161.497 124.126) (width 0.4) (layer "F.Cu") (net 3) (tstamp d86d4bc6-2e1a-4646-b49f-2a299a487a1d)) + (segment (start 161.497 124.126) (end 160.655 124.968) (width 0.4) (layer "F.Cu") (net 3) (tstamp e7abd526-64f2-459a-8bc4-3105405872ca)) + (segment (start 152.3135 119.143) (end 152.6305 119.46) (width 0.4) (layer "F.Cu") (net 3) (tstamp fc71efd2-46ee-4573-9045-ee9ff2751347)) + (segment (start 143.891 108.331) (end 143.764 108.331) (width 0.4) (layer "F.Cu") (net 4) (tstamp 15ab06b9-155e-478f-9e07-5d3be50c462f)) + (segment (start 146.541 110.981) (end 143.891 108.331) (width 0.4) (layer "F.Cu") (net 4) (tstamp 1f4a74f2-295b-42ff-a1c7-16bbc5d6f1bd)) + (segment (start 147.447 110.981) (end 146.541 110.981) (width 0.4) (layer "F.Cu") (net 4) (tstamp 3f55f384-9f55-4aed-8b3e-c7b042f271b0)) + (segment (start 151.507 62.3335) (end 151.2335 62.06) (width 0.4) (layer "F.Cu") (net 4) (tstamp 45867c8c-bb0f-4072-9e2b-82771b5b67fe)) + (segment (start 153.1385 62.3335) (end 151.507 62.3335) (width 0.4) (layer "F.Cu") (net 4) (tstamp 52359d53-7d4b-4a25-8b07-2a41d7fae6a7)) + (segment (start 151.2335 62.06) (end 153.416 59.8775) (width 0.4) (layer "F.Cu") (net 4) (tstamp 55974c5a-40c2-4e5e-80c7-220580aa403d)) + (segment (start 153.416 59.8775) (end 153.416 59.817) (width 0.4) (layer "F.Cu") (net 4) (tstamp 87976fab-033d-494c-bd21-4285a9f6cbc9)) + (segment (start 149.9635 62.06) (end 151.2335 62.06) (width 0.4) (layer "F.Cu") (net 4) (tstamp da7bfdb3-1fd8-46fa-b83c-ea46108f1c7d)) + (via (at 143.764 108.331) (size 2) (drill 1) (layers "F.Cu" "B.Cu") (net 4) (tstamp 6da88130-4bdf-4521-9398-2142d7e66227)) + (via (at 153.416 59.817) (size 2) (drill 1) (layers "F.Cu" "B.Cu") (net 4) (tstamp 93090cd3-6233-466d-9406-4eedfb9e214d)) + (segment (start 140.081 58.293) (end 140.081 104.648) (width 0.4) (layer "B.Cu") (net 4) (tstamp 18bf10dc-57e2-4015-b6fe-dbb270aa7d3f)) + (segment (start 150.495 56.896) (end 141.478 56.896) (width 0.4) (layer "B.Cu") (net 4) (tstamp 33e25ec8-8042-4b89-982f-9be80669d628)) + (segment (start 153.416 59.817) (end 150.495 56.896) (width 0.4) (layer "B.Cu") (net 4) (tstamp a4507755-ceec-4cdd-862c-d47312ee501a)) + (segment (start 140.081 104.648) (end 143.764 108.331) (width 0.4) (layer "B.Cu") (net 4) (tstamp b81e36b1-76f0-4abf-adad-60179777c97d)) + (segment (start 141.478 56.896) (end 140.081 58.293) (width 0.4) (layer "B.Cu") (net 4) (tstamp d07bde9a-da78-40e6-9061-696555e96a52)) + (segment (start 153.6465 80.156) (end 153.6465 77.7475) (width 0.4) (layer "F.Cu") (net 5) (tstamp 01903035-51e5-4d8d-871b-1562d671dd33)) + (segment (start 163.30363 88.839) (end 164.084 88.839) (width 0.4) (layer "F.Cu") (net 5) (tstamp 15e1de10-d969-4ad9-9390-752e440c417c)) + (segment (start 163.1715 101.6) (end 163.1715 100.1795) (width 0.4) (layer "F.Cu") (net 5) (tstamp 163ed4cf-6394-44ce-b07c-4f0bfc6cfb4d)) + (segment (start 157.1263 69.9442) (end 155.3727 69.9442) (width 0.4) (layer "F.Cu") (net 5) (tstamp 1ce304e2-9bf9-431a-b510-4da5cb56c65b)) + (segment (start 163.322 118.11) (end 163.322 120.396) (width 0.4) (layer "F.Cu") (net 5) (tstamp 203920b3-98c5-4338-83e3-1d4136e5a936)) + (segment (start 163.322 118.11) (end 163.322 109.093) (width 0.4) (layer "F.Cu") (net 5) (tstamp 2283b750-5135-4c85-bca7-2dd53a132739)) + (segment (start 162.22663 89.916) (end 163.30363 88.839) (width 0.4) (layer "F.Cu") (net 5) (tstamp 2da83178-008d-44bd-929f-0a928665bac9)) + (segment (start 164.084 88.773) (end 164.084 88.839) (width 0.4) (layer "F.Cu") (net 5) (tstamp 3a600ec7-f6e2-4cff-b1e8-5081809268f4)) + (segment (start 157.3495 81.934) (end 155.4245 81.934) (width 0.4) (layer "F.Cu") (net 5) (tstamp 3c8f8506-1119-40c4-9e0b-b15dc36547d7)) + (segment (start 155.3483 69.9198) (end 155.3483 68.3533) (width 0.4) (layer "F.Cu") (net 5) (tstamp 409080a7-423f-4520-8a07-18a3c0000402)) + (segment (start 157.3495 84.3435) (end 160.001 86.995) (width 0.4) (layer "F.Cu") (net 5) (tstamp 426954e6-c102-4d77-9ed9-7a7365bb8823)) + (segment (start 160.001 86.995) (end 161.5 86.995) (width 0.4) (layer "F.Cu") (net 5) (tstamp 7526d95a-a20e-4ee7-873b-6a3cdb8e79df)) + (segment (start 159.385 96.393) (end 159.385 90.297) (width 0.4) (layer "F.Cu") (net 5) (tstamp 85e4b2c9-982b-408f-8c85-e30547d23d88)) + (segment (start 155.3727 69.9442) (end 155.3483 69.9198) (width 0.4) (layer "F.Cu") (net 5) (tstamp 8e82fea8-b52d-49ff-8b4e-2d9580e0839e)) + (segment (start 162.477 87.166) (end 164.084 88.773) (width 0.4) (layer "F.Cu") (net 5) (tstamp 946fb878-7dee-497f-9cc7-d2e693bc0014)) + (segment (start 153.6465 77.7475) (end 153.67 77.724) (width 0.4) (layer "F.Cu") (net 5) (tstamp 9a59f0e0-25c2-4e3e-9645-1a1506c2a31a)) + (segment (start 155.3483 68.3533) (end 154.8225 67.8275) (width 0.4) (layer "F.Cu") (net 5) (tstamp ae8660ad-757e-4ebc-9b2d-4a1a170671db)) + (segment (start 159.385 90.297) (end 159.766 89.916) (width 0.4) (layer "F.Cu") (net 5) (tstamp afd0614d-3534-4697-aa27-ea8aa8df346e)) + (segment (start 163.322 104.013) (end 163.322 101.7505) (width 0.4) (layer "F.Cu") (net 5) (tstamp b096f011-3a5c-436f-9029-8a236e6ca981)) + (segment (start 163.1715 100.1795) (end 159.385 96.393) (width 0.4) (layer "F.Cu") (net 5) (tstamp b28dc5d8-9105-4f93-8f9e-e28e237c16fc)) + (segment (start 157.3495 81.934) (end 157.3495 84.3435) (width 0.4) (layer "F.Cu") (net 5) (tstamp c0002cc3-4a92-4ddb-85c3-2daaca857a15)) + (segment (start 161.671 87.166) (end 162.477 87.166) (width 0.4) (layer "F.Cu") (net 5) (tstamp c445fb7f-c6d8-4ea0-b202-00947b950739)) + (segment (start 159.766 89.916) (end 162.22663 89.916) (width 0.4) (layer "F.Cu") (net 5) (tstamp cea7cb6f-d866-4939-94e1-77592f54aa0d)) + (segment (start 161.5 86.995) (end 161.671 87.166) (width 0.4) (layer "F.Cu") (net 5) (tstamp e4847406-bec9-40a3-a7ea-95204523206d)) + (segment (start 163.322 101.7505) (end 163.1715 101.6) (width 0.4) (layer "F.Cu") (net 5) (tstamp f0735c85-d91a-4df6-9df1-6f8ee6890ecf)) + (segment (start 155.4245 81.934) (end 153.6465 80.156) (width 0.4) (layer "F.Cu") (net 5) (tstamp fb4bd7e5-a054-4a27-b017-11662fcb6006)) + (via (at 154.8225 67.8275) (size 2) (drill 1) (layers "F.Cu" "B.Cu") (net 5) (tstamp 0e0fe890-107f-4c04-8de5-9b864a7d7055)) + (via (at 163.322 109.093) (size 2) (drill 1) (layers "F.Cu" "B.Cu") (net 5) (tstamp 86fc7ce0-9a16-413c-be1b-1a26a1f2e8d1)) + (via (at 153.67 77.724) (size 2) (drill 1) (layers "F.Cu" "B.Cu") (net 5) (tstamp bff5efc0-90a9-40d8-98e8-3dc08bae3bdd)) + (via (at 163.322 104.013) (size 2) (drill 1) (layers "F.Cu" "B.Cu") (net 5) (tstamp f5efa279-f7e2-4683-83e0-498c84ddd9e4)) + (segment (start 153.67 77.724) (end 153.67 68.98) (width 0.4) (layer "B.Cu") (net 5) (tstamp 0ff15a0c-5537-4e0b-8539-0154bab1f959)) + (segment (start 153.67 68.98) (end 154.8225 67.8275) (width 0.4) (layer "B.Cu") (net 5) (tstamp 21232d79-2083-40cd-9c0e-e0a535cdd79d)) + (segment (start 163.322 104.013) (end 163.322 109.093) (width 0.4) (layer "B.Cu") (net 5) (tstamp 4376bba6-d09c-456f-ba15-b18204a0d158)) + (segment (start 151.2335 67.6675) (end 151.2335 67.01) (width 0.4) (layer "F.Cu") (net 6) (tstamp 0d39a049-1f04-4225-b308-5bd9a1901460)) + (segment (start 152.019 75.711) (end 152.019 68.453) (width 0.4) (layer "F.Cu") (net 6) (tstamp 1e115316-fa5b-4e03-b7b3-239fe95fddbd)) + (segment (start 152.019 68.453) (end 151.2335 67.6675) (width 0.4) (layer "F.Cu") (net 6) (tstamp 3ba733ac-d133-402a-bfa0-e3bde33c17a0)) + (segment (start 150.001 80.156) (end 149.813 79.968) (width 0.4) (layer "F.Cu") (net 6) (tstamp 426fcf8a-5850-4cd6-a0e5-773da9ed3d70)) + (segment (start 151.8215 80.156) (end 152.146 80.4805) (width 0.4) (layer "F.Cu") (net 6) (tstamp 44d9e643-69b0-4a1a-acc7-c0009387b48d)) + (segment (start 151.8215 76.7835) (end 151.384 76.346) (width 0.4) (layer "F.Cu") (net 6) (tstamp 5455021e-23e6-4f4d-a368-758efd564551)) + (segment (start 151.8215 80.156) (end 151.8215 76.7835) (width 0.4) (layer "F.Cu") (net 6) (tstamp 62590208-e679-4a41-acf7-b28f56bd6519)) + (segment (start 152.146 80.4805) (end 152.146 94.996) (width 0.4) (layer "F.Cu") (net 6) (tstamp 72b61df5-f256-4545-bca5-0e69f11e8d03)) + (segment (start 150.639 96.503) (end 147.447 96.503) (width 0.4) (layer "F.Cu") (net 6) (tstamp 84331f6c-7c8b-4edd-9617-b16988aa0137)) + (segment (start 151.384 76.346) (end 152.019 75.711) (width 0.4) (layer "F.Cu") (net 6) (tstamp af7da984-2bda-42e3-8740-67c58367e094)) + (segment (start 151.8215 80.156) (end 150.001 80.156) (width 0.4) (layer "F.Cu") (net 6) (tstamp b9b55fb8-dfac-44b1-b434-20d54b5dd068)) + (segment (start 152.146 94.996) (end 150.639 96.503) (width 0.4) (layer "F.Cu") (net 6) (tstamp d85fe85b-b775-41a2-b306-a4e2f29622bb)) + (segment (start 147.065 66.6515) (end 147.4235 67.01) (width 0.4) (layer "F.Cu") (net 7) (tstamp 093c8a5f-318b-43a9-9be5-fd8c409a08c2)) + (segment (start 146.304 71.981) (end 147.4235 70.8615) (width 0.4) (layer "F.Cu") (net 7) (tstamp 0d72ae7c-c962-44df-8de5-2982afe0b7c1)) + (segment (start 145.087 63.688) (end 145.087 66.5775) (width 0.4) (layer "F.Cu") (net 7) (tstamp 35bffa70-561d-46bd-a20a-1c95816c4f31)) + (segment (start 148.065 88.646) (end 148.065 85.962) (width 0.4) (layer "F.Cu") (net 7) (tstamp 4353fff5-0ac3-4d7d-b87f-31741d2b932a)) + (segment (start 149.5825 74.314) (end 149.5825 73.5095) (width 0.4) (layer "F.Cu") (net 7) (tstamp 45cb7146-932e-47e9-b5c2-7894cf53a1d5)) + (segment (start 141.304 56.388) (end 141.304 64.977) (width 0.4) (layer "F.Cu") (net 7) (tstamp 58e3f9d7-04e5-4604-b948-9c40ec4ae8d2)) + (segment (start 145.161 66.6515) (end 147.065 66.6515) (width 0.4) (layer "F.Cu") (net 7) (tstamp 6b422ed2-195e-4a4d-85f0-16212bed847e)) + (segment (start 148.065 85.962) (end 146.304 84.201) (width 0.4) (layer "F.Cu") (net 7) (tstamp 71bf6f71-23d9-4386-8baf-42eeea6e3626)) + (segment (start 146.304 84.201) (end 146.304 71.981) (width 0.4) (layer "F.Cu") (net 7) (tstamp 7d1736f1-0050-475a-bb59-19a2eab6bb65)) + (segment (start 149.559 74.3375) (end 149.5825 74.314) (width 0.4) (layer "F.Cu") (net 7) (tstamp 89cbb856-468e-4828-8654-f51069ad0857)) + (segment (start 147.4235 71.3505) (end 147.4235 70.8615) (width 0.4) (layer "F.Cu") (net 7) (tstamp a3bc1870-4952-45ad-858b-510b0b1c5c00)) + (segment (start 142.9785 66.6515) (end 145.161 66.6515) (width 0.4) (layer "F.Cu") (net 7) (tstamp a55ae50a-0040-4626-a910-f2ec643df51e)) + (segment (start 145.087 66.5775) (end 145.161 66.6515) (width 0.4) (layer "F.Cu") (net 7) (tstamp b1f0b1e7-99ce-448a-b9d9-c9b5238d5b48)) + (segment (start 149.559 76.346) (end 149.559 74.3375) (width 0.4) (layer "F.Cu") (net 7) (tstamp cc318d7c-cf7a-4a47-93a4-d3dc35ac5f77)) + (segment (start 149.5825 73.5095) (end 147.4235 71.3505) (width 0.4) (layer "F.Cu") (net 7) (tstamp d72f2553-6ec5-4588-b6d9-a0e710b5efab)) + (segment (start 147.4235 70.8615) (end 147.4235 67.01) (width 0.4) (layer "F.Cu") (net 7) (tstamp ec07e289-0aad-486e-addf-144742478a32)) + (segment (start 141.304 64.977) (end 142.9785 66.6515) (width 0.4) (layer "F.Cu") (net 7) (tstamp f9ae2e57-c493-4bbb-8ee6-0e8bd1a0f6a9)) + (segment (start 156.544 77.0928) (end 156.544 78.9857) (width 0.4) (layer "F.Cu") (net 8) (tstamp 5dea202e-3154-480e-b2a0-765596dbe0fe)) + (segment (start 156.508672 77.057472) (end 156.544 77.0928) (width 0.4) (layer "F.Cu") (net 8) (tstamp 74c6b83b-54b4-402b-afb3-8dcd38d5e4cb)) + (segment (start 156.544 78.9857) (end 156.4811 79.0486) (width 0.4) (layer "F.Cu") (net 8) (tstamp 7ed3d483-fcf5-4c03-aaa7-42c669758e14)) + (segment (start 156.508672 75.511828) (end 156.508672 77.057472) (width 0.4) (layer "F.Cu") (net 8) (tstamp 7f71caaa-4f61-46aa-9367-64f8428f6226)) + (segment (start 157.1263 74.8942) (end 156.508672 75.511828) (width 0.4) (layer "F.Cu") (net 8) (tstamp bd18f8c2-361f-44b3-8583-a60d9dd0abb5)) + (segment (start 158.3963 77.0655) (end 158.369 77.0928) (width 0.4) (layer "F.Cu") (net 9) (tstamp 0747db82-bacc-4cc0-94a9-865e8af8e2cd)) + (segment (start 158.7296 77.4534) (end 158.369 77.0928) (width 0.4) (layer "F.Cu") (net 9) (tstamp 3914cc24-b8dc-444b-aa67-631591f059e9)) + (segment (start 158.3963 74.8942) (end 158.3963 77.0655) (width 0.4) (layer "F.Cu") (net 9) (tstamp 6722e4a0-7058-48d5-880d-b6374ad561f8)) + (segment (start 159.6663 74.8942) (end 158.3963 74.8942) (width 0.4) (layer "F.Cu") (net 9) (tstamp b6d51d20-8d70-4d7c-a389-cd9c17872f1c)) + (segment (start 160.2505 77.4534) (end 158.7296 77.4534) (width 0.4) (layer "F.Cu") (net 9) (tstamp cea4c666-8483-4e76-82d9-63538476283f)) + (segment (start 160.2505 81.533) (end 159.8495 81.934) (width 0.4) (layer "F.Cu") (net 10) (tstamp 34dde42e-d0dc-4767-8541-d60345496f61)) + (segment (start 161.8199 81.1466) (end 160.6369 81.1466) (width 0.4) (layer "F.Cu") (net 10) (tstamp 6eb792e2-be88-40a2-89b0-99bf913c45b3)) + (segment (start 160.2505 79.3534) (end 160.2505 81.533) (width 0.4) (layer "F.Cu") (net 10) (tstamp b9ba80b3-dd3b-476a-978d-7bc4a00a0a6f)) + (segment (start 160.6369 81.1466) (end 159.8495 81.934) (width 0.4) (layer "F.Cu") (net 10) (tstamp d0e4e44a-85c5-4271-85c1-6c5091cd0806)) + (segment (start 162.2825 77.4534) (end 162.2825 74.9704) (width 0.4) (layer "F.Cu") (net 11) (tstamp 1a7064b8-cb99-4f50-9294-7e9c67a20407)) + (segment (start 162.2825 74.9704) (end 162.2063 74.8942) (width 0.4) (layer "F.Cu") (net 11) (tstamp a0d99f77-9c2f-4321-8bed-9164a1217c69)) + (segment (start 162.2063 74.8942) (end 160.9363 74.8942) (width 0.4) (layer "F.Cu") (net 11) (tstamp afc5ba30-f18a-4b0d-be6f-237f491105a6)) + (segment (start 162.2825 79.3534) (end 164.0757 81.1466) (width 0.4) (layer "F.Cu") (net 12) (tstamp 25e77a5f-5455-449e-9155-9a030bbcfb66)) + (segment (start 164.3355 81.1622) (end 164.3199 81.1466) (width 0.4) (layer "F.Cu") (net 12) (tstamp 47391c71-31b4-402f-905a-33e774bd1bfd)) + (segment (start 164.0757 81.1466) (end 164.3199 81.1466) (width 0.4) (layer "F.Cu") (net 12) (tstamp e7e75d44-3b9a-417b-a8d6-dfd3b2cccd92)) + (segment (start 166.2957 81.1622) (end 164.3355 81.1622) (width 0.4) (layer "F.Cu") (net 12) (tstamp ec6e4f17-1076-4277-8a07-3449912627a0)) + (segment (start 163.4763 69.9442) (end 163.4763 74.8942) (width 0.4) (layer "F.Cu") (net 13) (tstamp 119c3789-e3bc-4eae-97cf-e9ab82e1c1d1)) + (segment (start 163.4763 76.6508) (end 163.4763 74.8942) (width 0.4) (layer "F.Cu") (net 13) (tstamp 5650762f-edb1-4caa-b341-16dffa961c26)) + (segment (start 164.2891 77.4636) (end 163.4763 76.6508) (width 0.4) (layer "F.Cu") (net 13) (tstamp 68a053e4-e44b-4089-a603-fab7d4433b56)) + (segment (start 166.2957 76.6156) (end 166.6767 76.2346) (width 0.4) (layer "F.Cu") (net 14) (tstamp 0c1348fe-9b6b-4cd3-ba6d-7617c512e3c4)) + (segment (start 164.2891 79.3636) (end 165.5943 79.3636) (width 0.4) (layer "F.Cu") (net 14) (tstamp b03e3d9c-c169-445d-a252-99a23c0d56f9)) + (segment (start 166.2957 78.6622) (end 166.2957 76.6156) (width 0.4) (layer "F.Cu") (net 14) (tstamp b64dc608-a477-4d96-a4a0-9a81e8924dc0)) + (segment (start 165.5943 79.3636) (end 166.2957 78.6622) (width 0.4) (layer "F.Cu") (net 14) (tstamp e79c9a4c-ef85-4eaa-9d49-f7dd38eeec77)) + (segment (start 166.4979 69.9442) (end 166.5497 69.996) (width 0.4) (layer "F.Cu") (net 15) (tstamp 0c58d93b-2d49-47a5-86ff-62686e411ffc)) + (segment (start 160.9363 69.9442) (end 160.9363 66.7937) (width 0.4) (layer "F.Cu") (net 15) (tstamp 199d9efd-426a-4684-b213-4447b563f7e2)) + (segment (start 167.513 63.9) (end 168.275 64.662) (width 0.4) (layer "F.Cu") (net 15) (tstamp 30173692-ce7f-41a5-a2b2-f914c8380084)) + (segment (start 160.9363 66.7937) (end 161.814 65.916) (width 0.4) (layer "F.Cu") (net 15) (tstamp 30fe3f98-4798-4267-935b-f5bc258ad600)) + (segment (start 163.77334 63.9) (end 167.513 63.9) (width 0.4) (layer "F.Cu") (net 15) (tstamp 38a918c7-5f5e-4377-bf89-99e00c7d3224)) + (segment (start 165.608 69.9442) (end 164.7463 69.9442) (width 0.4) (layer "F.Cu") (net 15) (tstamp 4214db04-b37b-49bf-aaf9-f9f786ffe9ee)) + (segment (start 163.068 64.60534) (end 163.77334 63.9) (width 0.4) (layer "F.Cu") (net 15) (tstamp 5677929b-f389-44c6-9dc0-32480fbfc54d)) + (segment (start 165.735 69.8172) (end 165.608 69.9442) (width 0.4) (layer "F.Cu") (net 15) (tstamp 8413e5b1-d424-44ad-85ed-d657d6c8fc25)) + (segment (start 162.83 65.916) (end 163.068 65.678) (width 0.4) (layer "F.Cu") (net 15) (tstamp 94a4034c-3f89-42e9-92c0-9cb5900ba526)) + (segment (start 165.989 67.075) (end 165.735 67.329) (width 0.4) (layer "F.Cu") (net 15) (tstamp b44e1348-58da-4f8d-b275-f2d371294c0e)) + (segment (start 161.814 65.916) (end 162.83 65.916) (width 0.4) (layer "F.Cu") (net 15) (tstamp b97e4ff7-4174-402e-a27f-383954e2c713)) + (segment (start 165.735 67.329) (end 165.735 69.8172) (width 0.4) (layer "F.Cu") (net 15) (tstamp be641472-b63e-4da6-b87e-00b84edf7bdf)) + (segment (start 163.068 65.678) (end 163.068 64.60534) (width 0.4) (layer "F.Cu") (net 15) (tstamp e1979444-9ecc-430d-880d-39c0f9bee206)) + (segment (start 167.894 67.075) (end 165.989 67.075) (width 0.4) (layer "F.Cu") (net 15) (tstamp ec67e220-cba8-4abc-b8c5-bc4c0fb8019c)) + (segment (start 164.7463 69.9442) (end 166.4979 69.9442) (width 0.4) (layer "F.Cu") (net 15) (tstamp f8a3bfcd-4b6a-4f74-bb3b-b5dd069eec98)) + (segment (start 168.275 64.662) (end 168.275 66.694) (width 0.4) (layer "F.Cu") (net 15) (tstamp f90331bc-03d5-477e-9346-91b16f683fd3)) + (segment (start 168.275 66.694) (end 167.894 67.075) (width 0.4) (layer "F.Cu") (net 15) (tstamp f9f28bb7-262d-4d7a-8942-064ed61cd937)) + (segment (start 168.402 69.107) (end 167.62 68.325) (width 0.4) (layer "F.Cu") (net 16) (tstamp 353bc457-51ff-4feb-b612-f79df59398e7)) + (segment (start 167.391 71.896) (end 168.402 70.885) (width 0.4) (layer "F.Cu") (net 16) (tstamp 49e8d49c-c00b-4526-8e0b-11457f8b395c)) + (segment (start 166.6767 72.023) (end 166.5497 71.896) (width 0.4) (layer "F.Cu") (net 16) (tstamp 783d007d-0d36-4bbc-bbf5-3a9c72520a31)) + (segment (start 166.5497 71.896) (end 167.391 71.896) (width 0.4) (layer "F.Cu") (net 16) (tstamp 8f53a3f9-6d73-4917-8494-f9a656b6fad7)) + (segment (start 166.6767 73.7346) (end 166.6767 72.023) (width 0.4) (layer "F.Cu") (net 16) (tstamp 9c12f527-b6f7-40c7-90a8-670ba7a5aa2f)) + (segment (start 168.402 70.885) (end 168.402 69.107) (width 0.4) (layer "F.Cu") (net 16) (tstamp b85556de-5ae2-4b88-92b4-c3bb203d8c90)) + (segment (start 167.62 68.325) (end 167.005 68.325) (width 0.4) (layer "F.Cu") (net 16) (tstamp b8fd5614-d9d6-4e3d-bed3-fda473b90e3c)) + (segment (start 161.925 72.282) (end 162.179 72.028) (width 0.4) (layer "F.Cu") (net 17) (tstamp 0a9f5e20-646a-4050-bc32-c3c3e23e0b48)) + (segment (start 162.179 72.028) (end 162.179 69.9715) (width 0.4) (layer "F.Cu") (net 17) (tstamp 1d503bda-8ed3-46b2-8fad-efe147676201)) + (segment (start 162.179 69.9715) (end 162.2063 69.9442) (width 0.4) (layer "F.Cu") (net 17) (tstamp 26a518cd-7eaf-44cb-b229-a5a073ae3eb0)) + (segment (start 162.2063 67.7487) (end 162.499 67.456) (width 0.4) (layer "F.Cu") (net 17) (tstamp 26b5ac70-79f0-4928-8ed4-b329e0ccb212)) + (segment (start 158.3963 72.0553) (end 158.623 72.282) (width 0.4) (layer "F.Cu") (net 17) (tstamp 3d985407-5b6e-4996-86bd-b0c6773a8d09)) + (segment (start 158.3963 69.9442) (end 158.3963 72.0553) (width 0.4) (layer "F.Cu") (net 17) (tstamp 7341fe3d-9006-435d-8460-39b79a80f6b3)) + (segment (start 162.2063 69.9442) (end 162.2063 67.7487) (width 0.4) (layer "F.Cu") (net 17) (tstamp 79f269e2-92de-4b3d-9708-e433d7d4a577)) + (segment (start 158.623 72.282) (end 161.925 72.282) (width 0.4) (layer "F.Cu") (net 17) (tstamp ea286583-4ab0-413e-b297-2f03732d6715)) + (segment (start 164.592 65.19) (end 164.318 64.916) (width 0.4) (layer "F.Cu") (net 18) (tstamp 92233a62-f0ad-40b1-aa4f-0a0df40ffde1)) + (segment (start 167.005 65.825) (end 165.227 65.825) (width 0.4) (layer "F.Cu") (net 18) (tstamp ad8201c2-64ea-4c5e-a0f7-913461ac3b58)) + (segment (start 165.227 65.825) (end 164.318 64.916) (width 0.4) (layer "F.Cu") (net 18) (tstamp cdd29747-c709-4fc5-a05f-960d021117db)) + (segment (start 164.399 67.456) (end 164.592 67.263) (width 0.4) (layer "F.Cu") (net 18) (tstamp ce1ad46b-9cba-4b7a-b703-f2ed9359154d)) + (segment (start 164.592 67.263) (end 164.592 65.19) (width 0.4) (layer "F.Cu") (net 18) (tstamp d60c625c-3134-40d2-b6ac-e6516eea5b9d)) + (segment (start 159.6663 68.0523) (end 159.6663 69.9442) (width 0.4) (layer "F.Cu") (net 19) (tstamp 87ff4ee0-5e2e-4b60-9de0-c52178e6cea2)) + (segment (start 159.385 67.771) (end 159.6663 68.0523) (width 0.4) (layer "F.Cu") (net 19) (tstamp d34720f0-e21d-4e19-a6ad-b1b7ad92efe2)) + (segment (start 160.927963 64.916) (end 161.818 64.916) (width 0.4) (layer "F.Cu") (net 20) (tstamp 2064e847-6758-4183-b914-ab7c3160da5e)) + (segment (start 159.3592 65.8968) (end 159.385 65.871) (width 0.4) (layer "F.Cu") (net 20) (tstamp 93b8c93a-50f4-4448-a40a-fe23e81e3e79)) + (segment (start 159.972963 65.871) (end 160.927963 64.916) (width 0.4) (layer "F.Cu") (net 20) (tstamp ab4ab9db-de45-416c-9d83-dd7ed14ec400)) + (segment (start 159.385 65.871) (end 159.972963 65.871) (width 0.4) (layer "F.Cu") (net 20) (tstamp bc2a90ed-bb12-496e-a5ad-1306a8d44e57)) + (segment (start 157.353 65.8968) (end 159.3592 65.8968) (width 0.4) (layer "F.Cu") (net 20) (tstamp e8df7ef2-d582-45b8-8b6d-dd2adf7b3bf4)) + (segment (start 161.5224 60.598) (end 161.5224 62.6179) (width 0.4) (layer "F.Cu") (net 21) (tstamp 19ef79ab-2b41-457c-8b58-c99c08a0c80b)) + (segment (start 161.5224 62.6179) (end 161.5103 62.63) (width 0.4) (layer "F.Cu") (net 21) (tstamp 25e4ee2d-2daa-488c-b0aa-e96b94ed7b8f)) + (segment (start 161.1516 60.598) (end 161.5224 60.598) (width 0.4) (layer "F.Cu") (net 21) (tstamp 4178f990-48f6-426a-9ab7-d7ee8c6b6906)) + (segment (start 159.6663 62.0833) (end 161.1516 60.598) (width 0.4) (layer "F.Cu") (net 21) (tstamp f50ca72f-7e7d-444d-9f5c-c2dd2bcc065a)) + (segment (start 165.547 60.598) (end 163.3474 60.598) (width 0.4) (layer "F.Cu") (net 22) (tstamp 12b01a79-a812-4fb0-a3d1-c2f9f4b85fa4)) + (segment (start 158.242 56.388) (end 155.4715 56.388) (width 0.4) (layer "F.Cu") (net 22) (tstamp 2959641f-89a7-4698-93da-97023a005397)) + (segment (start 163.3474 60.598) (end 163.3474 58.6994) (width 0.4) (layer "F.Cu") (net 22) (tstamp 5322e2ab-1321-4797-85e8-dfe0fdc27bca)) + (segment (start 165.608 60.537) (end 165.547 60.598) (width 0.4) (layer "F.Cu") (net 22) (tstamp 854219bb-a939-40e2-845b-811319120773)) + (segment (start 163.3474 58.6994) (end 162.687 58.039) (width 0.4) (layer "F.Cu") (net 22) (tstamp ad734967-ccd2-48b7-9cfd-323202f0bd1b)) + (via (at 162.687 58.039) (size 2) (drill 1) (layers "F.Cu" "B.Cu") (net 22) (tstamp 8bae8dcd-bd01-440e-9040-71de47b7aff1)) + (via (at 158.242 56.388) (size 2) (drill 1) (layers "F.Cu" "B.Cu") (net 22) (tstamp adb6b66c-5d48-4eac-acd8-5ddacbefb8db)) + (segment (start 158.242 56.388) (end 161.3535 56.388) (width 0.4) (layer "B.Cu") (net 22) (tstamp 744be3a5-dbb1-4df9-a4c3-90dc7a747169)) + (segment (start 162.687 57.7215) (end 162.687 58.039) (width 0.4) (layer "B.Cu") (net 22) (tstamp 914577ba-6421-497e-b140-861e9f169d86)) + (segment (start 161.3535 56.388) (end 162.687 57.7215) (width 0.4) (layer "B.Cu") (net 22) (tstamp ff4d6ffb-3758-43b2-8c6c-9796861857e9)) + (segment (start 157.8645 63.9083) (end 157.353 63.3968) (width 0.4) (layer "F.Cu") (net 23) (tstamp 77046023-8e97-44f8-9c99-8a60c4b3981a)) + (segment (start 159.6663 63.9083) (end 157.8645 63.9083) (width 0.4) (layer "F.Cu") (net 23) (tstamp be0ad8e2-ad4e-44f6-b8c4-92fc75e03837)) + (segment (start 152.6305 123.444) (end 152.6305 121.285) (width 0.4) (layer "F.Cu") (net 24) (tstamp 2fecb62f-0bb4-4a55-a31c-577f663fceb7)) + (segment (start 157.9645 123.11) (end 157.6305 123.444) (width 0.4) (layer "F.Cu") (net 25) (tstamp 61ffa4f0-5e68-4e31-a0de-5d5a0ebd6d45)) + (segment (start 157.9645 121.285) (end 157.9645 123.11) (width 0.4) (layer "F.Cu") (net 25) (tstamp f5843871-c452-4f08-bcbe-9063de7ff357)) + (segment (start 137.6915 56.3645) (end 139.827 54.229) (width 0.4) (layer "F.Cu") (net 26) (tstamp 2bddfec5-aacd-4412-8208-f47853f3d668)) + (segment (start 147.066 54.229) (end 148.783 55.946) (width 0.4) (layer "F.Cu") (net 26) (tstamp 31abca2b-02ae-404a-b4d5-591ff978b74e)) + (segment (start 148.783 55.946) (end 148.783 58.928) (width 0.4) (layer "F.Cu") (net 26) (tstamp 379b9660-ad97-4741-b2d9-54304e9fb472)) + (segment (start 137.6915 56.3645) (end 136.144 56.3645) (width 0.4) (layer "F.Cu") (net 26) (tstamp 7a2e613e-776d-4cbc-8917-644a65b177fe)) + (segment (start 148.6935 59.0175) (end 148.6935 62.06) (width 0.4) (layer "F.Cu") (net 26) (tstamp 7cdf6664-44dc-431f-938d-57d6f40834bf)) + (segment (start 148.783 58.928) (end 148.6935 59.0175) (width 0.4) (layer "F.Cu") (net 26) (tstamp 83733d95-ac7a-4aad-a9c9-875e3b64fdc7)) + (segment (start 139.827 54.229) (end 147.066 54.229) (width 0.4) (layer "F.Cu") (net 26) (tstamp f339479c-868a-4bb2-88f6-10d2ad64122d)) + (segment (start 148.863 64.77) (end 148.6935 64.9395) (width 0.4) (layer "F.Cu") (net 27) (tstamp 5618ed0d-a80b-469f-a464-2029150c3991)) + (segment (start 152.527 64.77) (end 148.863 64.77) (width 0.4) (layer "F.Cu") (net 27) (tstamp 6170bfcb-40ac-4d8e-8c96-dd092c276002)) + (segment (start 148.6935 67.01) (end 148.6935 69.234) (width 0.4) (layer "F.Cu") (net 27) (tstamp 87351f3f-64e4-4b13-92b5-5648cdb65fcf)) + (segment (start 148.6935 64.9395) (end 148.6935 67.01) (width 0.4) (layer "F.Cu") (net 27) (tstamp a138b6b0-2ce4-4356-90f3-c6fc85fb4a77)) + (segment (start 153.1385 64.1585) (end 152.527 64.77) (width 0.4) (layer "F.Cu") (net 27) (tstamp b897fed1-751f-4148-b711-1ec4996b5e08)) + (segment (start 148.6935 69.234) (end 148.5665 69.361) (width 0.4) (layer "F.Cu") (net 27) (tstamp e600bc19-13a9-44c4-be43-8e5439bcce42)) + (segment (start 136.144 58.1895) (end 136.144 59.817) (width 0.4) (layer "F.Cu") (net 28) (tstamp 3d00c87b-9428-4ec5-9db1-30fdf56ff07b)) + (segment (start 136.144 61.642) (end 136.144 63.2225) (width 0.4) (layer "F.Cu") (net 29) (tstamp 7b1fdf4f-ba8c-4994-8e65-d6c25ae3b8f8)) + (segment (start 136.144 65.0475) (end 136.144 66.6515) (width 0.4) (layer "F.Cu") (net 30) (tstamp 65dba281-ac03-49e7-9566-2cc9161322ec)) + (segment (start 136.144 68.4765) (end 136.144 70.0805) (width 0.4) (layer "F.Cu") (net 31) (tstamp 88575353-fa98-42ed-afb0-2a6ed7803b1a)) + (segment (start 136.144 73.486) (end 135.97 73.66) (width 0.4) (layer "F.Cu") (net 32) (tstamp 17f448c7-3027-4949-9024-7ad8d2ab509f)) + (segment (start 136.144 71.9055) (end 136.144 73.486) (width 0.4) (layer "F.Cu") (net 32) (tstamp d1fd6caf-97ea-463e-9488-d372f286a01f)) + (segment (start 139.4225 73.66) (end 137.795 73.66) (width 0.4) (layer "F.Cu") (net 33) (tstamp 5301e3f7-279d-4420-86f7-ca6cb3a1149d)) + (segment (start 142.8515 73.66) (end 141.2475 73.66) (width 0.4) (layer "F.Cu") (net 34) (tstamp 058eb2ed-e40a-4ffe-8c90-096e5bb55c2e)) + (segment (start 144.6765 73.66) (end 144.6765 72.056) (width 0.4) (layer "F.Cu") (net 35) (tstamp 0bf5d688-9ea0-45b8-910c-1132516982ac)) + (segment (start 144.6765 72.056) (end 144.526 71.9055) (width 0.4) (layer "F.Cu") (net 35) (tstamp 7d841f60-3056-4c51-8502-a7cdad8ff929)) + (segment (start 145.161 68.4765) (end 145.161 70.0805) (width 0.4) (layer "F.Cu") (net 36) (tstamp ebaeb64f-56e9-4013-a554-84ca6c712559)) + (segment (start 164.084 90.739) (end 165.293 90.739) (width 0.4) (layer "F.Cu") (net 37) (tstamp 00747be8-3538-4368-9c62-abacc4c4d2dc)) + (segment (start 145.087 59.616) (end 145.034 59.563) (width 0.4) (layer "F.Cu") (net 37) (tstamp 04440d57-0a67-4633-a606-db2f03dcbf17)) + (segment (start 162.306 106.299) (end 164.973 106.299) (width 0.4) (layer "F.Cu") (net 37) (tstamp 072736e2-585d-44f0-8897-592722aa74f0)) + (segment (start 168.148 74.949) (end 168.148 81.934) (width 0.4) (layer "F.Cu") (net 37) (tstamp 09bedef0-f36e-411c-a296-670451bb2a04)) + (segment (start 145.5185 62.061) (end 147.4225 62.061) (width 0.4) (layer "F.Cu") (net 37) (tstamp 0b730b61-0fd4-4e2d-a59e-2dd02df82ed2)) + (segment (start 164.8185 74.822) (end 164.7463 74.8942) (width 0.4) (layer "F.Cu") (net 37) (tstamp 0f39d484-d435-4009-b023-3b7ef9136464)) + (segment (start 155.956 80.537) (end 155.194 79.775) (width 0.4) (layer "F.Cu") (net 37) (tstamp 12f1fdf4-fc8c-4873-82c1-7cbeb934fe97)) + (segment (start 164.084 90.739) (end 164.023 90.739) (width 0.4) (layer "F.Cu") (net 37) (tstamp 152a213c-6633-4351-bd99-c75fb750eef3)) + (segment (start 158.3811 79.0486) (end 158.3811 80.0169) (width 0.4) (layer "F.Cu") (net 37) (tstamp 153dbdfb-8415-4fc0-a9bc-257d0c3a09a2)) + (segment (start 155.465 88.646) (end 155.465 95.885) (width 0.4) (layer "F.Cu") (net 37) (tstamp 1a0e1b93-db9e-460f-aff4-611278377da1)) + (segment (start 166.751 104.521) (end 166.751 97.746) (width 0.4) (layer "F.Cu") (net 37) (tstamp 21094654-0dee-4dd4-8ca2-49d099811728)) + (segment (start 168.529 74.822) (end 168.021 74.822) (width 0.4) (layer "F.Cu") (net 37) (tstamp 21b6726d-c94a-4674-b6fd-77258127772e)) + (segment (start 161.036 56.261) (end 164.319 56.261) (width 0.4) (layer "F.Cu") (net 37) (tstamp 2854334f-1c08-4b1c-8c74-5278b82c8180)) + (segment (start 155.7715 103.1935) (end 155.7715 101.6) (width 0.4) (layer "F.Cu") (net 37) (tstamp 2e916112-429e-4816-9c85-23cf9af08809)) + (segment (start 154.813 73.552) (end 153.289 72.028) (width 0.4) (layer "F.Cu") (net 37) (tstamp 359bdf22-dd8e-45a7-ab28-ffc4e8b94e52)) + (segment (start 158.623 112.776) (end 154.178 112.776) (width 0.4) (layer "F.Cu") (net 37) (tstamp 37491097-2c71-4e4d-80a1-9e121c22a10c)) + (segment (start 168.021 74.822) (end 164.8185 74.822) (width 0.4) (layer "F.Cu") (net 37) (tstamp 39f38d20-46dc-45cb-9321-378d9bd2e0a3)) + (segment (start 158.3811 80.0169) (end 157.861 80.537) (width 0.4) (layer "F.Cu") (net 37) (tstamp 3d593465-e8c1-4769-9c59-76f2df993e22)) + (segment (start 169.291 64.154) (end 169.291 74.06) (width 0.4) (layer "F.Cu") (net 37) (tstamp 40658718-ad4c-40f8-aae5-25c14e3949e8)) + (segment (start 157.734 105.156) (end 158.623 105.156) (width 0.4) (layer "F.Cu") (net 37) (tstamp 456d1197-9142-4395-a0dc-07ee1ea12ff1)) + (segment (start 165.928 62.757) (end 165.608 62.437) (width 0.4) (layer "F.Cu") (net 37) (tstamp 48211ed9-176b-43b7-b270-48adbddc358a)) + (segment (start 155.575 61.722) (end 161.036 56.261) (width 0.4) (layer "F.Cu") (net 37) (tstamp 49273063-f84b-4109-9824-a85f1deb6165)) + (segment (start 152.4 105.156) (end 157.734 105.156) (width 0.4) (layer "F.Cu") (net 37) (tstamp 4b07654c-8e0c-44d5-a566-5f25754ae29d)) + (segment (start 143.51 117.094) (end 143.51 122.428) (width 0.4) (layer "F.Cu") (net 37) (tstamp 4c320c63-b84e-4318-98ea-18081a406247)) + (segment (start 158.877 83.204) (end 158.623 82.95) (width 0.4) (layer "F.Cu") (net 37) (tstamp 4cdff31d-b744-4018-8f6f-8ec5994df543)) + (segment (start 163.6033 62.437) (end 163.4103 62.63) (width 0.4) (layer "F.Cu") (net 37) (tstamp 5843026a-ce51-471a-b7f8-239b2357f596)) + (segment (start 159.893 106.426) (end 159.893 111.506) (width 0.4) (layer "F.Cu") (net 37) (tstamp 5b09793b-d854-4d75-997d-a80007145f05)) + (segment (start 143.51 122.428) (end 144.653 123.571) (width 0.4) (layer "F.Cu") (net 37) (tstamp 5e54c792-e2b1-4529-a1ee-bc0383415059)) + (segment (start 165.608 62.437) (end 163.6033 62.437) (width 0.4) (layer "F.Cu") (net 37) (tstamp 62d25a97-58e1-4db3-99fd-74a42673817b)) + (segment (start 159.893 111.506) (end 158.623 112.776) (width 0.4) (layer "F.Cu") (net 37) (tstamp 64f9b3ee-8730-4d43-bfc8-9d2a9ea399e6)) + (segment (start 153.289 66.548) (end 155.575 64.262) (width 0.4) (layer "F.Cu") (net 37) (tstamp 65879e41-d5b5-40a8-9548-6d1de104a1a6)) + (segment (start 144.018 100.474) (end 147.447 103.903) (width 0.4) (layer "F.Cu") (net 37) (tstamp 6e074879-d5fa-4d97-acb2-e24cb43f21e6)) + (segment (start 165.293 90.739) (end 166.878 89.154) (width 0.4) (layer "F.Cu") (net 37) (tstamp 6ea0e0c8-cd12-4920-b4e5-6ef37147499d)) + (segment (start 151.257 83.312) (end 151.257 91.059) (width 0.4) (layer "F.Cu") (net 37) (tstamp 78454485-8540-45d2-bb5b-92e351b62cff)) + (segment (start 164.023 90.739) (end 162.096 92.666) (width 0.4) (layer "F.Cu") (net 37) (tstamp 7c155179-8ef9-478e-92ae-7cf7e5616e1a)) + (segment (start 151.147 103.903) (end 152.4 105.156) (width 0.4) (layer "F.Cu") (net 37) (tstamp 81c957ae-f496-443a-bfb7-e0cdd1538d4e)) + (segment (start 149.987 92.329) (end 145.542 92.329) (width 0.4) (layer "F.Cu") (net 37) (tstamp 837234e2-af11-4c46-a5ea-91bed6ecdfd0)) + (segment (start 158.623 105.156) (end 159.893 106.426) (width 0.4) (layer "F.Cu") (net 37) (tstamp 87caa837-6a7a-466c-acc5-e26cd3698816)) + (segment (start 147.955 74.5115) (end 147.7575 74.314) (width 0.4) (layer "F.Cu") (net 37) (tstamp 887ab83b-4676-4466-a7b4-d1f84d76b276)) + (segment (start 155.3483 73.552) (end 155.3483 71.8198) (width 0.4) (layer "F.Cu") (net 37) (tstamp 8a80e8a8-0352-4308-badf-2d345a34c1c4)) + (segment (start 164.973 106.299) (end 166.751 104.521) (width 0.4) (layer "F.Cu") (net 37) (tstamp 93207fae-a419-4069-a762-9c09944c04f6)) + (segment (start 166.878 89.154) (end 166.878 83.204) (width 0.4) (layer "F.Cu") (net 37) (tstamp 98aeaa0f-0643-4815-b295-1d311b49c4d6)) + (segment (start 166.878 83.204) (end 158.877 83.204) (width 0.4) (layer "F.Cu") (net 37) (tstamp 99d2ce32-c7d3-4348-a1df-b3bcb80cde2d)) + (segment (start 149.813 81.868) (end 147.955 80.01) (width 0.4) (layer "F.Cu") (net 37) (tstamp a0c8a42a-941f-4e63-9309-9e877a907557)) + (segment (start 147.955 80.01) (end 147.955 74.5115) (width 0.4) (layer "F.Cu") (net 37) (tstamp ae86bec2-a798-4a97-9bcf-a9a7a48826b5)) + (segment (start 167.386 62.757) (end 165.928 62.757) (width 0.4) (layer "F.Cu") (net 37) (tstamp b01a80ef-b1c2-451b-af13-ec50d51cf73e)) + (segment (start 157.607 101.473) (end 157.607 101.6) (width 0.4) (layer "F.Cu") (net 37) (tstamp b744d5bc-b8f4-4033-93b0-d267ae787372)) + (segment (start 145.923 114.681) (end 143.51 117.094) (width 0.4) (layer "F.Cu") (net 37) (tstamp b8e4050e-0f27-47eb-95e0-5f055460a8c4)) + (segment (start 147.5035 123.571) (end 147.6305 123.444) (width 0.4) (layer "F.Cu") (net 37) (tstamp bbabfa36-b483-419d-815b-82169ad044c6)) + (segment (start 155.3483 73.552) (end 154.813 73.552) (width 0.4) (layer "F.Cu") (net 37) (tstamp bed36f47-8f67-494c-b5ed-a1d4a8a56f92)) + (segment (start 167.64 62.503) (end 169.291 64.154) (width 0.4) (layer "F.Cu") (net 37) (tstamp c188a0e3-69e8-41ef-8c59-e4dbeb5cf5fd)) + (segment (start 145.542 92.329) (end 144.018 93.853) (width 0.4) (layer "F.Cu") (net 37) (tstamp c18b05df-9a79-4b93-abd4-49f01bc9d555)) + (segment (start 167.64 62.503) (end 167.386 62.757) (width 0.4) (layer "F.Cu") (net 37) (tstamp c314d985-71ae-4b65-865e-7f4ac93575d6)) + (segment (start 155.194 79.775) (end 155.194 73.7063) (width 0.4) (layer "F.Cu") (net 37) (tstamp c550a7d0-bb69-4687-8f5c-47e7c80bf675)) + (segment (start 147.447 103.903) (end 151.147 103.903) (width 0.4) (layer "F.Cu") (net 37) (tstamp c774745d-5d23-4714-86d3-103fa3dc429d)) + (segment (start 144.653 123.571) (end 147.5035 123.571) (width 0.4) (layer "F.Cu") (net 37) (tstamp c80f8a60-6fde-4d60-85ac-3a2b38d44024)) + (segment (start 145.087 61.788) (end 145.087 59.616) (width 0.4) (layer "F.Cu") (net 37) (tstamp cf6bb16a-e3ff-4f05-9174-321fdb4e2a62)) + (segment (start 152.273 114.681) (end 145.923 114.681) (width 0.4) (layer "F.Cu") (net 37) (tstamp d07c5cfd-a715-4075-ace9-ef4ff730fab7)) + (segment (start 155.575 64.262) (end 155.575 61.722) (width 0.4) (layer "F.Cu") (net 37) (tstamp d77fe287-95d8-476e-943e-11142b2e6626)) + (segment (start 144.018 93.853) (end 144.018 100.474) (width 0.4) (layer "F.Cu") (net 37) (tstamp db202c00-bffb-4633-8b23-78769678589b)) + (segment (start 149.813 81.868) (end 151.257 83.312) (width 0.4) (layer "F.Cu") (net 37) (tstamp dba75dad-e166-4062-87d8-b815659b0da3)) + (segment (start 158.623 79.2905) (end 158.3811 79.0486) (width 0.4) (layer "F.Cu") (net 37) (tstamp dfdd7022-7892-4b74-bde1-b45386fd5aab)) + (segment (start 155.465 95.885) (end 147.447 103.903) (width 0.4) (layer "F.Cu") (net 37) (tstamp e1f7e895-a572-44b7-8b4f-8a0dd8cc80e5)) + (segment (start 157.734 105.156) (end 155.7715 103.1935) (width 0.4) (layer "F.Cu") (net 37) (tstamp e2c1be75-91c8-464d-8507-539936a3bb28)) + (segment (start 167.64 59.582) (end 167.64 62.503) (width 0.4) (layer "F.Cu") (net 37) (tstamp e3473549-25e6-4452-b52a-6fb7fbb952bd)) + (segment (start 155.194 73.7063) (end 155.3483 73.552) (width 0.4) (layer "F.Cu") (net 37) (tstamp e3e71fdd-36a7-42f8-a98a-a307c20b1f17)) + (segment (start 154.178 112.776) (end 152.273 114.681) (width 0.4) (layer "F.Cu") (net 37) (tstamp e47cfb7b-3f3c-49a6-9092-01640657dee7)) + (segment (start 168.148 81.934) (end 166.878 83.204) (width 0.4) (layer "F.Cu") (net 37) (tstamp e85cc410-215d-48ad-9957-a4dede1ccbf2)) + (segment (start 166.751 97.746) (end 161.671 92.666) (width 0.4) (layer "F.Cu") (net 37) (tstamp ea08c997-6bb7-4d0b-ad9b-e69757bafbe9)) + (segment (start 157.607 101.6) (end 162.306 106.299) (width 0.4) (layer "F.Cu") (net 37) (tstamp ec29c942-00d0-4af2-ad0f-cf5793ce2cb9)) + (segment (start 162.096 92.666) (end 161.671 92.666) (width 0.4) (layer "F.Cu") (net 37) (tstamp ec7bd283-c986-4a0e-934c-1673fdd6eaf4)) + (segment (start 169.291 74.06) (end 168.529 74.822) (width 0.4) (layer "F.Cu") (net 37) (tstamp efc6d1ba-1ee4-43f0-9e76-e77a1e3bde72)) + (segment (start 164.319 56.261) (end 167.64 59.582) (width 0.4) (layer "F.Cu") (net 37) (tstamp f0de5f5a-aa8d-4be0-a3fc-1c8759329c95)) + (segment (start 158.623 82.95) (end 158.623 79.2905) (width 0.4) (layer "F.Cu") (net 37) (tstamp f427660e-6c56-4a51-9434-e93b4fad20b6)) + (segment (start 151.257 91.059) (end 149.987 92.329) (width 0.4) (layer "F.Cu") (net 37) (tstamp f452eae6-7a20-4d79-a808-c16daa70dc20)) + (segment (start 147.4225 62.061) (end 147.4235 62.06) (width 0.4) (layer "F.Cu") (net 37) (tstamp f905ca43-42a8-47af-ba23-7ce00c19867d)) + (segment (start 153.289 72.028) (end 153.289 66.548) (width 0.4) (layer "F.Cu") (net 37) (tstamp f9759d87-ce7b-47aa-8ac1-c745fd5beffb)) + (segment (start 168.021 74.822) (end 168.148 74.949) (width 0.4) (layer "F.Cu") (net 37) (tstamp fafeb955-2de9-4d26-a852-292c410c1007)) + (segment (start 157.861 80.537) (end 155.956 80.537) (width 0.4) (layer "F.Cu") (net 37) (tstamp fd80021a-8c15-4b9e-b240-37c48e1753ce)) + (via (at 147.955 78.232) (size 2) (drill 1) (layers "F.Cu" "B.Cu") (net 37) (tstamp 8b6ad981-cba1-4854-ae6d-505f1be242c3)) + (via (at 145.034 59.563) (size 2) (drill 1) (layers "F.Cu" "B.Cu") (net 37) (tstamp c39e22d0-5062-42dd-9526-1fa6e5877c7d)) + (segment (start 143.764 59.563) (end 142.24 61.087) (width 0.4) (layer "B.Cu") (net 37) (tstamp 04813a22-1f5b-4e16-bca7-d27d4024fa43)) + (segment (start 142.24 61.087) (end 142.24 74.93) (width 0.4) (layer "B.Cu") (net 37) (tstamp 2af6a0d9-9901-4c08-9057-e9d59db07ae3)) + (segment (start 145.542 78.232) (end 147.955 78.232) (width 0.4) (layer "B.Cu") (net 37) (tstamp 2f11498a-30a4-44b9-ae7d-b7d2550d58d0)) + (segment (start 145.034 59.563) (end 143.764 59.563) (width 0.4) (layer "B.Cu") (net 37) (tstamp 3cd9f5ee-581c-473a-9140-e30a988cec82)) + (segment (start 142.24 74.93) (end 145.542 78.232) (width 0.4) (layer "B.Cu") (net 37) (tstamp 4f775bba-9f77-44ed-beed-654d7ef0e89d)) + (segment (start 150.683 57.009) (end 150.683 58.928) (width 0.4) (layer "F.Cu") (net 38) (tstamp 1a84cb6f-7f17-4257-a200-89550ab49a24)) + (segment (start 151.304 56.388) (end 150.683 57.009) (width 0.4) (layer "F.Cu") (net 38) (tstamp 427ceb3d-8e4c-4001-b305-02e0ae736bfd)) + (segment (start 153.6465 56.388) (end 151.304 56.388) (width 0.4) (layer "F.Cu") (net 38) (tstamp 867904d9-bab4-4022-9eb4-57a06c087f8f)) + +) diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/StudioMic.kicad_prl b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/StudioMic.kicad_prl new file mode 100755 index 0000000..b47e5cf --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/StudioMic.kicad_prl @@ -0,0 +1,76 @@ +{ + "board": { + "active_layer": 44, + "active_layer_preset": "", + "auto_track_width": true, + "hidden_netclasses": [], + "hidden_nets": [], + "high_contrast_mode": 0, + "net_color_mode": 1, + "opacity": { + "images": 0.6, + "pads": 1.0, + "tracks": 1.0, + "vias": 1.0, + "zones": 0.6 + }, + "selection_filter": { + "dimensions": true, + "footprints": true, + "graphics": true, + "keepouts": true, + "lockedItems": false, + "otherItems": true, + "pads": true, + "text": true, + "tracks": true, + "vias": true, + "zones": true + }, + "visible_items": [ + 0, + 1, + 2, + 3, + 4, + 5, + 8, + 9, + 10, + 11, + 13, + 15, + 16, + 17, + 18, + 19, + 20, + 21, + 22, + 23, + 24, + 25, + 26, + 27, + 28, + 29, + 30, + 32, + 33, + 34, + 35, + 36, + 39, + 40 + ], + "visible_layers": "ffdffff_ffffffff", + "zone_display_mode": 0 + }, + "meta": { + "filename": "StudioMic.kicad_prl", + "version": 3 + }, + "project": { + "files": [] + } +} diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/StudioMic.kicad_pro b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/StudioMic.kicad_pro new file mode 100755 index 0000000..dfcb878 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/StudioMic.kicad_pro @@ -0,0 +1,490 @@ +{ + "board": { + "3dviewports": [], + "design_settings": { + "defaults": { + "board_outline_line_width": 0.09999999999999999, + "copper_line_width": 0.19999999999999998, + "copper_text_italic": false, + "copper_text_size_h": 1.5, + "copper_text_size_v": 1.5, + "copper_text_thickness": 0.3, + "copper_text_upright": false, + "courtyard_line_width": 0.049999999999999996, + "dimension_precision": 4, + "dimension_units": 3, + "dimensions": { + "arrow_length": 1270000, + "extension_offset": 500000, + "keep_text_aligned": true, + "suppress_zeroes": false, + "text_position": 0, + "units_format": 1 + }, + "fab_line_width": 0.09999999999999999, + "fab_text_italic": false, + "fab_text_size_h": 1.0, + "fab_text_size_v": 1.0, + "fab_text_thickness": 0.15, + "fab_text_upright": false, + "other_line_width": 0.15, + "other_text_italic": false, + "other_text_size_h": 1.0, + "other_text_size_v": 1.0, + "other_text_thickness": 0.15, + "other_text_upright": false, + "pads": { + "drill": 3.5, + "height": 2.7, + "width": 3.5 + }, + "silk_line_width": 0.15, + "silk_text_italic": false, + "silk_text_size_h": 1.0, + "silk_text_size_v": 1.0, + "silk_text_thickness": 0.15, + "silk_text_upright": false, + "zones": { + "min_clearance": 0.5 + } + }, + "diff_pair_dimensions": [ + { + "gap": 0.0, + "via_gap": 0.0, + "width": 0.0 + } + ], + "drc_exclusions": [], + "meta": { + "version": 2 + }, + "rule_severities": { + "annular_width": "error", + "clearance": "error", + "connection_width": "warning", + "copper_edge_clearance": "error", + "copper_sliver": "warning", + "courtyards_overlap": "ignore", + "diff_pair_gap_out_of_range": "error", + "diff_pair_uncoupled_length_too_long": "error", + "drill_out_of_range": "error", + "duplicate_footprints": "warning", + "extra_footprint": "warning", + "footprint": "error", + "footprint_type_mismatch": "ignore", + "hole_clearance": "error", + "hole_near_hole": "error", + "invalid_outline": "error", + "isolated_copper": "warning", + "item_on_disabled_layer": "error", + "items_not_allowed": "error", + "length_out_of_range": "error", + "lib_footprint_issues": "warning", + "lib_footprint_mismatch": "warning", + "malformed_courtyard": "error", + "microvia_drill_out_of_range": "error", + "missing_courtyard": "ignore", + "missing_footprint": "warning", + "net_conflict": "warning", + "npth_inside_courtyard": "ignore", + "padstack": "warning", + "pth_inside_courtyard": "ignore", + "shorting_items": "error", + "silk_edge_clearance": "warning", + "silk_over_copper": "warning", + "silk_overlap": "warning", + "skew_out_of_range": "error", + "solder_mask_bridge": "error", + "starved_thermal": "error", + "text_height": "warning", + "text_thickness": "warning", + "through_hole_pad_without_hole": "error", + "too_many_vias": "error", + "track_dangling": "warning", + "track_width": "error", + "tracks_crossing": "error", + "unconnected_items": "error", + "unresolved_variable": "error", + "via_dangling": "warning", + "zones_intersect": "error" + }, + "rules": { + "max_error": 0.005, + "min_clearance": 0.0, + "min_connection": 0.0, + "min_copper_edge_clearance": 0.0, + "min_hole_clearance": 0.25, + "min_hole_to_hole": 0.25, + "min_microvia_diameter": 0.19999999999999998, + "min_microvia_drill": 0.09999999999999999, + "min_resolved_spokes": 2, + "min_silk_clearance": 0.0, + "min_text_height": 0.7999999999999999, + "min_text_thickness": 0.08, + "min_through_hole_diameter": 0.3, + "min_track_width": 0.0, + "min_via_annular_width": 0.09999999999999999, + "min_via_diameter": 0.5, + "solder_mask_clearance": 0.0, + "solder_mask_min_width": 0.0, + "solder_mask_to_copper_clearance": 0.0, + "use_height_for_length_calcs": true + }, + "teardrop_options": [ + { + "td_allow_use_two_tracks": true, + "td_curve_segcount": 5, + "td_on_pad_in_zone": false, + "td_onpadsmd": true, + "td_onroundshapesonly": false, + "td_ontrackend": false, + "td_onviapad": true + } + ], + "teardrop_parameters": [ + { + "td_curve_segcount": 0, + "td_height_ratio": 1.0, + "td_length_ratio": 0.5, + "td_maxheight": 2.0, + "td_maxlen": 1.0, + "td_target_name": "td_round_shape", + "td_width_to_size_filter_ratio": 0.9 + }, + { + "td_curve_segcount": 0, + "td_height_ratio": 1.0, + "td_length_ratio": 0.5, + "td_maxheight": 2.0, + "td_maxlen": 1.0, + "td_target_name": "td_rect_shape", + "td_width_to_size_filter_ratio": 0.9 + }, + { + "td_curve_segcount": 0, + "td_height_ratio": 1.0, + "td_length_ratio": 0.5, + "td_maxheight": 2.0, + "td_maxlen": 1.0, + "td_target_name": "td_track_end", + "td_width_to_size_filter_ratio": 0.9 + } + ], + "track_widths": [ + 0.0 + ], + "via_dimensions": [ + { + "diameter": 0.0, + "drill": 0.0 + } + ], + "zones_allow_external_fillets": false + }, + "layer_presets": [], + "viewports": [] + }, + "boards": [], + "cvpcb": { + "equivalence_files": [] + }, + "erc": { + "erc_exclusions": [], + "meta": { + "version": 0 + }, + "pin_map": [ + [ + 0, + 0, + 0, + 0, + 0, + 0, + 1, + 0, + 0, + 0, + 0, + 2 + ], + [ + 0, + 2, + 0, + 1, + 0, + 0, + 1, + 0, + 2, + 2, + 2, + 2 + ], + [ + 0, + 0, + 0, + 0, + 0, + 0, + 1, + 0, + 1, + 0, + 1, + 2 + ], + [ + 0, + 1, + 0, + 0, + 0, + 0, + 1, + 1, + 2, + 1, + 1, + 2 + ], + [ + 0, + 0, + 0, + 0, + 0, + 0, + 1, + 0, + 0, + 0, + 0, + 2 + ], + [ + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 2 + ], + [ + 1, + 1, + 1, + 1, + 1, + 0, + 1, + 1, + 1, + 1, + 1, + 2 + ], + [ + 0, + 0, + 0, + 1, + 0, + 0, + 1, + 0, + 0, + 0, + 0, + 2 + ], + [ + 0, + 2, + 1, + 2, + 0, + 0, + 1, + 0, + 2, + 2, + 2, + 2 + ], + [ + 0, + 2, + 0, + 1, + 0, + 0, + 1, + 0, + 2, + 0, + 0, + 2 + ], + [ + 0, + 2, + 1, + 1, + 0, + 0, + 1, + 0, + 2, + 0, + 0, + 2 + ], + [ + 2, + 2, + 2, + 2, + 2, + 2, + 2, + 2, + 2, + 2, + 2, + 2 + ] + ], + "rule_severities": { + "bus_definition_conflict": "error", + "bus_entry_needed": "error", + "bus_to_bus_conflict": "error", + "bus_to_net_conflict": "error", + "conflicting_netclasses": "error", + "different_unit_footprint": "error", + "different_unit_net": "error", + "duplicate_reference": "error", + "duplicate_sheet_names": "error", + "endpoint_off_grid": "warning", + "extra_units": "error", + "global_label_dangling": "warning", + "hier_label_mismatch": "error", + "label_dangling": "error", + "lib_symbol_issues": "warning", + "missing_bidi_pin": "warning", + "missing_input_pin": "warning", + "missing_power_pin": "error", + "missing_unit": "warning", + "multiple_net_names": "warning", + "net_not_bus_member": "warning", + "no_connect_connected": "warning", + "no_connect_dangling": "warning", + "pin_not_connected": "error", + "pin_not_driven": "error", + "pin_to_pin": "warning", + "power_pin_not_driven": "error", + "similar_labels": "warning", + "simulation_model_issue": "error", + "unannotated": "error", + "unit_value_mismatch": "error", + "unresolved_variable": "error", + "wire_dangling": "error" + } + }, + "libraries": { + "pinned_footprint_libs": [], + "pinned_symbol_libs": [] + }, + "meta": { + "filename": "StudioMic.kicad_pro", + "version": 1 + }, + "net_settings": { + "classes": [ + { + "bus_width": 12, + "clearance": 0.3, + "diff_pair_gap": 0.25, + "diff_pair_via_gap": 0.25, + "diff_pair_width": 0.2, + "line_style": 0, + "microvia_diameter": 0.3, + "microvia_drill": 0.1, + "name": "Default", + "pcb_color": "rgba(0, 0, 0, 0.000)", + "schematic_color": "rgba(0, 0, 0, 0.000)", + "track_width": 0.4, + "via_diameter": 1.0, + "via_drill": 0.5, + "wire_width": 6 + } + ], + "meta": { + "version": 3 + }, + "net_colors": null, + "netclass_assignments": null, + "netclass_patterns": [] + }, + "pcbnew": { + "last_paths": { + "gencad": "", + "idf": "", + "netlist": "", + "specctra_dsn": "", + "step": "StudioMic.step", + "vrml": "" + }, + "page_layout_descr_file": "" + }, + "schematic": { + "annotate_start_num": 0, + "drawing": { + "dashed_lines_dash_length_ratio": 12.0, + "dashed_lines_gap_length_ratio": 3.0, + "default_line_thickness": 6.0, + "default_text_size": 50.0, + "field_names": [], + "intersheets_ref_own_page": false, + "intersheets_ref_prefix": "", + "intersheets_ref_short": false, + "intersheets_ref_show": false, + "intersheets_ref_suffix": "", + "junction_size_choice": 3, + "label_size_ratio": 0.375, + "pin_symbol_size": 25.0, + "text_offset_ratio": 0.15 + }, + "legacy_lib_dir": "", + "legacy_lib_list": [], + "meta": { + "version": 1 + }, + "net_format_name": "", + "page_layout_descr_file": "", + "plot_directory": "", + "spice_current_sheet_as_root": false, + "spice_external_command": "spice \"%I\"", + "spice_model_current_sheet_as_root": true, + "spice_save_all_currents": false, + "spice_save_all_voltages": false, + "subpart_first_id": 65, + "subpart_id_separator": 0 + }, + "sheets": [ + [ + "91bc7b18-b29c-4e7b-9217-215188e7e972", + "" + ] + ], + "text_variables": {} +} diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/StudioMic.kicad_sch b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/StudioMic.kicad_sch new file mode 100755 index 0000000..e69de29 diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/StudioMic.pdf b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/StudioMic.pdf new file mode 100755 index 0000000..47afea0 Binary files /dev/null and b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/StudioMic.pdf differ diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/StudioMic.step b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/StudioMic.step new file mode 100755 index 0000000..9951f2e --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/StudioMic.step @@ -0,0 +1,64428 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION(('KiCad electronic assembly'),'2;1'); +FILE_NAME('StudioMic.step','2023-03-18T07:41:25',('Pcbnew'),('Kicad'), + 'Open CASCADE STEP processor 7.6','KiCad to STEP converter','Unknown' + ); +FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }')); +ENDSEC; +DATA; +#1 = APPLICATION_PROTOCOL_DEFINITION('international standard', + 'automotive_design',2000,#2); +#2 = APPLICATION_CONTEXT( + 'core data for automotive mechanical design processes'); +#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10); +#4 = PRODUCT_DEFINITION_SHAPE('','',#5); +#5 = PRODUCT_DEFINITION('design','',#6,#9); +#6 = PRODUCT_DEFINITION_FORMATION('','',#7); +#7 = PRODUCT('StudioMic 1','StudioMic 1','',(#8)); +#8 = PRODUCT_CONTEXT('',#2,'mechanical'); +#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#10 = SHAPE_REPRESENTATION('',(#11,#15,#19,#23,#27,#31,#35,#39,#43,#47, + #51,#55,#59,#63,#67,#71,#75,#79,#83,#87,#91,#95,#99,#103,#107,#111, + #115,#119,#123,#127,#131,#135,#139,#143,#147,#151,#155,#159,#163, + #167,#171,#175,#179,#183,#187,#191,#195,#199,#203,#207,#211,#215, + #219,#223),#227); +#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14); +#12 = CARTESIAN_POINT('',(0.,0.,0.)); +#13 = DIRECTION('',(0.,0.,1.)); +#14 = DIRECTION('',(1.,0.,-0.)); +#15 = AXIS2_PLACEMENT_3D('',#16,#17,#18); +#16 = CARTESIAN_POINT('',(162.282347,-78.403309,1.63)); +#17 = DIRECTION('',(-0.,0.,1.)); +#18 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#19 = AXIS2_PLACEMENT_3D('',#20,#21,#22); +#20 = CARTESIAN_POINT('',(145.086847,-62.737909,1.63)); +#21 = DIRECTION('',(-0.,0.,1.)); +#22 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#23 = AXIS2_PLACEMENT_3D('',#24,#25,#26); +#24 = CARTESIAN_POINT('',(159.384847,-66.820909,1.63)); +#25 = DIRECTION('',(0.,-0.,1.)); +#26 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#27 = AXIS2_PLACEMENT_3D('',#28,#29,#30); +#28 = CARTESIAN_POINT('',(160.936147,-72.419109,1.63)); +#29 = DIRECTION('',(0.,-0.,1.)); +#30 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#31 = AXIS2_PLACEMENT_3D('',#32,#33,#34); +#32 = CARTESIAN_POINT('',(161.670847,-89.915909,1.63)); +#33 = DIRECTION('',(-0.,0.,1.)); +#34 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#35 = AXIS2_PLACEMENT_3D('',#36,#37,#38); +#36 = CARTESIAN_POINT('',(153.138347,-63.245909,1.63)); +#37 = DIRECTION('',(0.,-0.,1.)); +#38 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#39 = AXIS2_PLACEMENT_3D('',#40,#41,#42); +#40 = CARTESIAN_POINT('',(152.733847,-80.155909,1.63)); +#41 = DIRECTION('',(0.,0.,1.)); +#42 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#43 = AXIS2_PLACEMENT_3D('',#44,#45,#46); +#44 = CARTESIAN_POINT('',(162.434747,-60.597909,1.63)); +#45 = DIRECTION('',(0.,0.,1.)); +#46 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#47 = AXIS2_PLACEMENT_3D('',#48,#49,#50); +#48 = CARTESIAN_POINT('',(157.352847,-64.646709,1.63)); +#49 = DIRECTION('',(-0.,0.,1.)); +#50 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#51 = AXIS2_PLACEMENT_3D('',#52,#53,#54); +#52 = CARTESIAN_POINT('',(159.471347,-101.599909,1.63)); +#53 = DIRECTION('',(0.,0.,1.)); +#54 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#55 = AXIS2_PLACEMENT_3D('',#56,#57,#58); +#56 = CARTESIAN_POINT('',(152.630347,-120.372409,1.63)); +#57 = DIRECTION('',(-0.,0.,1.)); +#58 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#59 = AXIS2_PLACEMENT_3D('',#60,#61,#62); +#60 = CARTESIAN_POINT('',(150.471347,-76.345909,1.63)); +#61 = DIRECTION('',(0.,0.,1.)); +#62 = DIRECTION('',(1.,0.,0.)); +#63 = AXIS2_PLACEMENT_3D('',#64,#65,#66); +#64 = CARTESIAN_POINT('',(163.448847,-67.455909,1.63)); +#65 = DIRECTION('',(0.,0.,1.)); +#66 = DIRECTION('',(1.,0.,0.)); +#67 = AXIS2_PLACEMENT_3D('',#68,#69,#70); +#68 = CARTESIAN_POINT('',(160.250347,-78.403309,1.63)); +#69 = DIRECTION('',(-0.,0.,1.)); +#70 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#71 = AXIS2_PLACEMENT_3D('',#72,#73,#74); +#72 = CARTESIAN_POINT('',(162.460147,-62.629909,1.63)); +#73 = DIRECTION('',(0.,0.,1.)); +#74 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#75 = AXIS2_PLACEMENT_3D('',#76,#77,#78); +#76 = CARTESIAN_POINT('',(163.069747,-81.146509,1.63)); +#77 = DIRECTION('',(0.,0.,1.)); +#78 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#79 = AXIS2_PLACEMENT_3D('',#80,#81,#82); +#80 = CARTESIAN_POINT('',(159.666147,-62.995709,1.63)); +#81 = DIRECTION('',(-0.,0.,1.)); +#82 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#83 = AXIS2_PLACEMENT_3D('',#84,#85,#86); +#84 = CARTESIAN_POINT('',(162.409347,-118.109909,1.63)); +#85 = DIRECTION('',(0.,0.,1.)); +#86 = DIRECTION('',(1.,0.,0.)); +#87 = AXIS2_PLACEMENT_3D('',#88,#89,#90); +#88 = CARTESIAN_POINT('',(149.478847,-69.360909,1.63)); +#89 = DIRECTION('',(0.,0.,1.)); +#90 = DIRECTION('',(1.,0.,0.)); +#91 = AXIS2_PLACEMENT_3D('',#92,#93,#94); +#92 = CARTESIAN_POINT('',(136.143847,-57.276909,1.63)); +#93 = DIRECTION('',(-0.,0.,1.)); +#94 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#95 = AXIS2_PLACEMENT_3D('',#96,#97,#98); +#96 = CARTESIAN_POINT('',(136.143847,-60.729409,1.63)); +#97 = DIRECTION('',(-0.,0.,1.)); +#98 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#99 = AXIS2_PLACEMENT_3D('',#100,#101,#102); +#100 = CARTESIAN_POINT('',(136.143847,-70.992909,1.63)); +#101 = DIRECTION('',(-0.,0.,1.)); +#102 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#103 = AXIS2_PLACEMENT_3D('',#104,#105,#106); +#104 = CARTESIAN_POINT('',(148.669847,-74.313909,1.63)); +#105 = DIRECTION('',(0.,0.,1.)); +#106 = DIRECTION('',(1.,0.,0.)); +#107 = AXIS2_PLACEMENT_3D('',#108,#109,#110); +#108 = CARTESIAN_POINT('',(155.348147,-70.869709,1.63)); +#109 = DIRECTION('',(0.,-0.,1.)); +#110 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#111 = AXIS2_PLACEMENT_3D('',#112,#113,#114); +#112 = CARTESIAN_POINT('',(162.409347,-120.395909,1.63)); +#113 = DIRECTION('',(0.,0.,1.)); +#114 = DIRECTION('',(1.,0.,0.)); +#115 = AXIS2_PLACEMENT_3D('',#116,#117,#118); +#116 = CARTESIAN_POINT('',(157.098847,-112.267909,1.63)); +#117 = DIRECTION('',(0.,-0.,1.)); +#118 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#119 = AXIS2_PLACEMENT_3D('',#120,#121,#122); +#120 = CARTESIAN_POINT('',(164.288947,-78.413509,1.63)); +#121 = DIRECTION('',(-0.,0.,1.)); +#122 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#123 = AXIS2_PLACEMENT_3D('',#124,#125,#126); +#124 = CARTESIAN_POINT('',(149.732847,-58.927909,1.63)); +#125 = DIRECTION('',(0.,0.,1.)); +#126 = DIRECTION('',(1.,0.,0.)); +#127 = AXIS2_PLACEMENT_3D('',#128,#129,#130); +#128 = CARTESIAN_POINT('',(151.764847,-88.645909,1.63)); +#129 = DIRECTION('',(0.,0.,1.)); +#130 = DIRECTION('',(1.,0.,0.)); +#131 = AXIS2_PLACEMENT_3D('',#132,#133,#134); +#132 = CARTESIAN_POINT('',(140.334847,-73.659909,1.63)); +#133 = DIRECTION('',(0.,0.,1.)); +#134 = DIRECTION('',(1.,0.,0.)); +#135 = AXIS2_PLACEMENT_3D('',#136,#137,#138); +#136 = CARTESIAN_POINT('',(157.964347,-120.372409,1.63)); +#137 = DIRECTION('',(-0.,0.,1.)); +#138 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#139 = AXIS2_PLACEMENT_3D('',#140,#141,#142); +#140 = CARTESIAN_POINT('',(163.067847,-64.915909,1.63)); +#141 = DIRECTION('',(0.,0.,1.)); +#142 = DIRECTION('',(1.,0.,0.)); +#143 = AXIS2_PLACEMENT_3D('',#144,#145,#146); +#144 = CARTESIAN_POINT('',(157.430947,-79.048509,1.63)); +#145 = DIRECTION('',(0.,0.,1.)); +#146 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#147 = AXIS2_PLACEMENT_3D('',#148,#149,#150); +#148 = CARTESIAN_POINT('',(158.599347,-81.933909,1.63)); +#149 = DIRECTION('',(0.,0.,1.)); +#150 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#151 = AXIS2_PLACEMENT_3D('',#152,#153,#154); +#152 = CARTESIAN_POINT('',(154.558847,-56.387909,1.63)); +#153 = DIRECTION('',(0.,0.,1.)); +#154 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#155 = AXIS2_PLACEMENT_3D('',#156,#157,#158); +#156 = CARTESIAN_POINT('',(157.456347,-77.092709,1.63)); +#157 = DIRECTION('',(0.,0.,1.)); +#158 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#159 = AXIS2_PLACEMENT_3D('',#160,#161,#162); +#160 = CARTESIAN_POINT('',(136.143847,-64.134909,1.63)); +#161 = DIRECTION('',(-0.,0.,1.)); +#162 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#163 = AXIS2_PLACEMENT_3D('',#164,#165,#166); +#164 = CARTESIAN_POINT('',(166.295547,-79.912109,1.63)); +#165 = DIRECTION('',(-0.,0.,1.)); +#166 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#167 = AXIS2_PLACEMENT_3D('',#168,#169,#170); +#168 = CARTESIAN_POINT('',(165.607847,-61.486909,1.63)); +#169 = DIRECTION('',(0.,-0.,1.)); +#170 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#171 = AXIS2_PLACEMENT_3D('',#172,#173,#174); +#172 = CARTESIAN_POINT('',(136.143847,-67.563909,1.63)); +#173 = DIRECTION('',(-0.,0.,1.)); +#174 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#175 = AXIS2_PLACEMENT_3D('',#176,#177,#178); +#176 = CARTESIAN_POINT('',(143.763847,-73.659909,1.63)); +#177 = DIRECTION('',(0.,0.,1.)); +#178 = DIRECTION('',(1.,0.,0.)); +#179 = AXIS2_PLACEMENT_3D('',#180,#181,#182); +#180 = CARTESIAN_POINT('',(167.004847,-67.074909,1.63)); +#181 = DIRECTION('',(-0.,0.,1.)); +#182 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#183 = AXIS2_PLACEMENT_3D('',#184,#185,#186); +#184 = CARTESIAN_POINT('',(144.525847,-70.992909,1.63)); +#185 = DIRECTION('',(0.,-0.,1.)); +#186 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#187 = AXIS2_PLACEMENT_3D('',#188,#189,#190); +#188 = CARTESIAN_POINT('',(164.083847,-89.788909,1.63)); +#189 = DIRECTION('',(0.,-0.,1.)); +#190 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#191 = AXIS2_PLACEMENT_3D('',#192,#193,#194); +#192 = CARTESIAN_POINT('',(136.882347,-73.659909,1.63)); +#193 = DIRECTION('',(0.,0.,1.)); +#194 = DIRECTION('',(1.,0.,0.)); +#195 = AXIS2_PLACEMENT_3D('',#196,#197,#198); +#196 = CARTESIAN_POINT('',(166.549547,-70.945909,1.63)); +#197 = DIRECTION('',(-0.,0.,1.)); +#198 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#199 = AXIS2_PLACEMENT_3D('',#200,#201,#202); +#200 = CARTESIAN_POINT('',(166.676547,-74.984509,1.63)); +#201 = DIRECTION('',(-0.,0.,1.)); +#202 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#203 = AXIS2_PLACEMENT_3D('',#204,#205,#206); +#204 = CARTESIAN_POINT('',(149.812847,-80.917909,1.63)); +#205 = DIRECTION('',(0.,-0.,1.)); +#206 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#207 = AXIS2_PLACEMENT_3D('',#208,#209,#210); +#208 = CARTESIAN_POINT('',(147.446847,-114.680909,1.63)); +#209 = DIRECTION('',(0.,-0.,1.)); +#210 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#211 = AXIS2_PLACEMENT_3D('',#212,#213,#214); +#212 = CARTESIAN_POINT('',(147.446847,-100.202909,1.63)); +#213 = DIRECTION('',(-0.,0.,1.)); +#214 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#215 = AXIS2_PLACEMENT_3D('',#216,#217,#218); +#216 = CARTESIAN_POINT('',(144.525847,-67.563909,1.63)); +#217 = DIRECTION('',(0.,-0.,1.)); +#218 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#219 = AXIS2_PLACEMENT_3D('',#220,#221,#222); +#220 = CARTESIAN_POINT('',(149.328347,-64.534909,1.63)); +#221 = DIRECTION('',(-0.,0.,1.)); +#222 = DIRECTION('',(1.110223024625E-16,-1.,0.)); +#223 = AXIS2_PLACEMENT_3D('',#224,#225,#226); +#224 = CARTESIAN_POINT('',(0.,0.,0.)); +#225 = DIRECTION('',(0.,0.,1.)); +#226 = DIRECTION('',(1.,0.,-0.)); +#227 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#231)) GLOBAL_UNIT_ASSIGNED_CONTEXT +((#228,#229,#230)) REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#228 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#229 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#230 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#231 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-02),#228, + 'distance_accuracy_value','confusion accuracy'); +#232 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#7)); +#233 = SHAPE_DEFINITION_REPRESENTATION(#234,#240); +#234 = PRODUCT_DEFINITION_SHAPE('','',#235); +#235 = PRODUCT_DEFINITION('design','',#236,#239); +#236 = PRODUCT_DEFINITION_FORMATION('','',#237); +#237 = PRODUCT('C_0805_2012Metric','C_0805_2012Metric','',(#238)); +#238 = PRODUCT_CONTEXT('',#2,'mechanical'); +#239 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#240 = SHAPE_REPRESENTATION('',(#11,#241),#245); +#241 = AXIS2_PLACEMENT_3D('',#242,#243,#244); +#242 = CARTESIAN_POINT('',(0.,0.,0.)); +#243 = DIRECTION('',(0.,0.,1.)); +#244 = DIRECTION('',(1.,0.,-0.)); +#245 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#249)) GLOBAL_UNIT_ASSIGNED_CONTEXT +((#246,#247,#248)) REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#246 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#247 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#248 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#249 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-02),#246, + 'distance_accuracy_value','confusion accuracy'); +#250 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#251),#2233); +#251 = MANIFOLD_SOLID_BREP('',#252); +#252 = CLOSED_SHELL('',(#253,#497,#573,#623,#677,#726,#775,#829,#879, + #906,#1155,#1232,#1281,#1335,#1384,#1434,#1483,#1537,#1564,#1813, + #1889,#1939,#1993,#2042,#2091,#2145,#2195,#2222)); +#253 = ADVANCED_FACE('',(#254),#268,.F.); +#254 = FACE_BOUND('',#255,.F.); +#255 = EDGE_LOOP('',(#256,#291,#320,#348,#381,#409,#438,#466)); +#256 = ORIENTED_EDGE('',*,*,#257,.F.); +#257 = EDGE_CURVE('',#258,#260,#262,.T.); +#258 = VERTEX_POINT('',#259); +#259 = CARTESIAN_POINT('',(-1.,-0.625,4.E-02)); +#260 = VERTEX_POINT('',#261); +#261 = CARTESIAN_POINT('',(-1.,-0.625,1.21)); +#262 = SURFACE_CURVE('',#263,(#267,#279),.PCURVE_S1.); +#263 = LINE('',#264,#265); +#264 = CARTESIAN_POINT('',(-1.,-0.625,0.)); +#265 = VECTOR('',#266,1.); +#266 = DIRECTION('',(0.,0.,1.)); +#267 = PCURVE('',#268,#273); +#268 = PLANE('',#269); +#269 = AXIS2_PLACEMENT_3D('',#270,#271,#272); +#270 = CARTESIAN_POINT('',(-1.,-0.625,0.)); +#271 = DIRECTION('',(1.,0.,0.)); +#272 = DIRECTION('',(0.,0.,1.)); +#273 = DEFINITIONAL_REPRESENTATION('',(#274),#278); +#274 = LINE('',#275,#276); +#275 = CARTESIAN_POINT('',(0.,0.)); +#276 = VECTOR('',#277,1.); +#277 = DIRECTION('',(1.,0.)); +#278 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#279 = PCURVE('',#280,#285); +#280 = PLANE('',#281); +#281 = AXIS2_PLACEMENT_3D('',#282,#283,#284); +#282 = CARTESIAN_POINT('',(-1.,-0.625,0.)); +#283 = DIRECTION('',(0.,1.,0.)); +#284 = DIRECTION('',(0.,-0.,1.)); +#285 = DEFINITIONAL_REPRESENTATION('',(#286),#290); +#286 = LINE('',#287,#288); +#287 = CARTESIAN_POINT('',(0.,0.)); +#288 = VECTOR('',#289,1.); +#289 = DIRECTION('',(1.,0.)); +#290 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#291 = ORIENTED_EDGE('',*,*,#292,.T.); +#292 = EDGE_CURVE('',#258,#293,#295,.T.); +#293 = VERTEX_POINT('',#294); +#294 = CARTESIAN_POINT('',(-1.,-0.585,0.)); +#295 = SURFACE_CURVE('',#296,(#301,#308),.PCURVE_S1.); +#296 = CIRCLE('',#297,4.E-02); +#297 = AXIS2_PLACEMENT_3D('',#298,#299,#300); +#298 = CARTESIAN_POINT('',(-1.,-0.585,4.E-02)); +#299 = DIRECTION('',(1.,0.,-0.)); +#300 = DIRECTION('',(0.,0.,1.)); +#301 = PCURVE('',#268,#302); +#302 = DEFINITIONAL_REPRESENTATION('',(#303),#307); +#303 = CIRCLE('',#304,4.E-02); +#304 = AXIS2_PLACEMENT_2D('',#305,#306); +#305 = CARTESIAN_POINT('',(4.E-02,-4.E-02)); +#306 = DIRECTION('',(1.,0.)); +#307 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#308 = PCURVE('',#309,#314); +#309 = CYLINDRICAL_SURFACE('',#310,4.E-02); +#310 = AXIS2_PLACEMENT_3D('',#311,#312,#313); +#311 = CARTESIAN_POINT('',(-1.,-0.585,4.E-02)); +#312 = DIRECTION('',(1.,0.,0.)); +#313 = DIRECTION('',(0.,-1.,0.)); +#314 = DEFINITIONAL_REPRESENTATION('',(#315),#319); +#315 = LINE('',#316,#317); +#316 = CARTESIAN_POINT('',(-1.570796326795,0.)); +#317 = VECTOR('',#318,1.); +#318 = DIRECTION('',(1.,0.)); +#319 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#320 = ORIENTED_EDGE('',*,*,#321,.T.); +#321 = EDGE_CURVE('',#293,#322,#324,.T.); +#322 = VERTEX_POINT('',#323); +#323 = CARTESIAN_POINT('',(-1.,0.585,0.)); +#324 = SURFACE_CURVE('',#325,(#329,#336),.PCURVE_S1.); +#325 = LINE('',#326,#327); +#326 = CARTESIAN_POINT('',(-1.,-0.625,0.)); +#327 = VECTOR('',#328,1.); +#328 = DIRECTION('',(0.,1.,0.)); +#329 = PCURVE('',#268,#330); +#330 = DEFINITIONAL_REPRESENTATION('',(#331),#335); +#331 = LINE('',#332,#333); +#332 = CARTESIAN_POINT('',(0.,0.)); +#333 = VECTOR('',#334,1.); +#334 = DIRECTION('',(0.,-1.)); +#335 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#336 = PCURVE('',#337,#342); +#337 = PLANE('',#338); +#338 = AXIS2_PLACEMENT_3D('',#339,#340,#341); +#339 = CARTESIAN_POINT('',(-1.,-0.625,0.)); +#340 = DIRECTION('',(0.,0.,1.)); +#341 = DIRECTION('',(1.,0.,-0.)); +#342 = DEFINITIONAL_REPRESENTATION('',(#343),#347); +#343 = LINE('',#344,#345); +#344 = CARTESIAN_POINT('',(0.,0.)); +#345 = VECTOR('',#346,1.); +#346 = DIRECTION('',(0.,1.)); +#347 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#348 = ORIENTED_EDGE('',*,*,#349,.F.); +#349 = EDGE_CURVE('',#350,#322,#352,.T.); +#350 = VERTEX_POINT('',#351); +#351 = CARTESIAN_POINT('',(-1.,0.625,4.E-02)); +#352 = SURFACE_CURVE('',#353,(#358,#369),.PCURVE_S1.); +#353 = CIRCLE('',#354,4.E-02); +#354 = AXIS2_PLACEMENT_3D('',#355,#356,#357); +#355 = CARTESIAN_POINT('',(-1.,0.585,4.E-02)); +#356 = DIRECTION('',(-1.,0.,0.)); +#357 = DIRECTION('',(0.,0.,1.)); +#358 = PCURVE('',#268,#359); +#359 = DEFINITIONAL_REPRESENTATION('',(#360),#368); +#360 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#361,#362,#363,#364,#365,#366 +,#367),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),( + -2.094395102393,0.,2.094395102393,4.188790204786,6.28318530718, +8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#361 = CARTESIAN_POINT('',(8.E-02,-1.21)); +#362 = CARTESIAN_POINT('',(8.E-02,-1.279282032303)); +#363 = CARTESIAN_POINT('',(2.E-02,-1.244641016151)); +#364 = CARTESIAN_POINT('',(-4.E-02,-1.21)); +#365 = CARTESIAN_POINT('',(2.E-02,-1.175358983849)); +#366 = CARTESIAN_POINT('',(8.E-02,-1.140717967697)); +#367 = CARTESIAN_POINT('',(8.E-02,-1.21)); +#368 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#369 = PCURVE('',#370,#375); +#370 = CYLINDRICAL_SURFACE('',#371,4.E-02); +#371 = AXIS2_PLACEMENT_3D('',#372,#373,#374); +#372 = CARTESIAN_POINT('',(-1.,0.585,4.E-02)); +#373 = DIRECTION('',(1.,0.,0.)); +#374 = DIRECTION('',(-0.,1.,0.)); +#375 = DEFINITIONAL_REPRESENTATION('',(#376),#380); +#376 = LINE('',#377,#378); +#377 = CARTESIAN_POINT('',(7.853981633974,0.)); +#378 = VECTOR('',#379,1.); +#379 = DIRECTION('',(-1.,0.)); +#380 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#381 = ORIENTED_EDGE('',*,*,#382,.T.); +#382 = EDGE_CURVE('',#350,#383,#385,.T.); +#383 = VERTEX_POINT('',#384); +#384 = CARTESIAN_POINT('',(-1.,0.625,1.21)); +#385 = SURFACE_CURVE('',#386,(#390,#397),.PCURVE_S1.); +#386 = LINE('',#387,#388); +#387 = CARTESIAN_POINT('',(-1.,0.625,0.)); +#388 = VECTOR('',#389,1.); +#389 = DIRECTION('',(0.,0.,1.)); +#390 = PCURVE('',#268,#391); +#391 = DEFINITIONAL_REPRESENTATION('',(#392),#396); +#392 = LINE('',#393,#394); +#393 = CARTESIAN_POINT('',(0.,-1.25)); +#394 = VECTOR('',#395,1.); +#395 = DIRECTION('',(1.,0.)); +#396 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#397 = PCURVE('',#398,#403); +#398 = PLANE('',#399); +#399 = AXIS2_PLACEMENT_3D('',#400,#401,#402); +#400 = CARTESIAN_POINT('',(-1.,0.625,0.)); +#401 = DIRECTION('',(0.,1.,0.)); +#402 = DIRECTION('',(0.,-0.,1.)); +#403 = DEFINITIONAL_REPRESENTATION('',(#404),#408); +#404 = LINE('',#405,#406); +#405 = CARTESIAN_POINT('',(0.,0.)); +#406 = VECTOR('',#407,1.); +#407 = DIRECTION('',(1.,0.)); +#408 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#409 = ORIENTED_EDGE('',*,*,#410,.T.); +#410 = EDGE_CURVE('',#383,#411,#413,.T.); +#411 = VERTEX_POINT('',#412); +#412 = CARTESIAN_POINT('',(-1.,0.585,1.25)); +#413 = SURFACE_CURVE('',#414,(#419,#426),.PCURVE_S1.); +#414 = CIRCLE('',#415,4.E-02); +#415 = AXIS2_PLACEMENT_3D('',#416,#417,#418); +#416 = CARTESIAN_POINT('',(-1.,0.585,1.21)); +#417 = DIRECTION('',(1.,0.,-0.)); +#418 = DIRECTION('',(0.,0.,1.)); +#419 = PCURVE('',#268,#420); +#420 = DEFINITIONAL_REPRESENTATION('',(#421),#425); +#421 = CIRCLE('',#422,4.E-02); +#422 = AXIS2_PLACEMENT_2D('',#423,#424); +#423 = CARTESIAN_POINT('',(1.21,-1.21)); +#424 = DIRECTION('',(1.,0.)); +#425 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#426 = PCURVE('',#427,#432); +#427 = CYLINDRICAL_SURFACE('',#428,4.E-02); +#428 = AXIS2_PLACEMENT_3D('',#429,#430,#431); +#429 = CARTESIAN_POINT('',(-1.,0.585,1.21)); +#430 = DIRECTION('',(1.,0.,0.)); +#431 = DIRECTION('',(-0.,1.,0.)); +#432 = DEFINITIONAL_REPRESENTATION('',(#433),#437); +#433 = LINE('',#434,#435); +#434 = CARTESIAN_POINT('',(-4.712388980385,0.)); +#435 = VECTOR('',#436,1.); +#436 = DIRECTION('',(1.,0.)); +#437 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#438 = ORIENTED_EDGE('',*,*,#439,.F.); +#439 = EDGE_CURVE('',#440,#411,#442,.T.); +#440 = VERTEX_POINT('',#441); +#441 = CARTESIAN_POINT('',(-1.,-0.585,1.25)); +#442 = SURFACE_CURVE('',#443,(#447,#454),.PCURVE_S1.); +#443 = LINE('',#444,#445); +#444 = CARTESIAN_POINT('',(-1.,-0.625,1.25)); +#445 = VECTOR('',#446,1.); +#446 = DIRECTION('',(0.,1.,0.)); +#447 = PCURVE('',#268,#448); +#448 = DEFINITIONAL_REPRESENTATION('',(#449),#453); +#449 = LINE('',#450,#451); +#450 = CARTESIAN_POINT('',(1.25,0.)); +#451 = VECTOR('',#452,1.); +#452 = DIRECTION('',(0.,-1.)); +#453 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#454 = PCURVE('',#455,#460); +#455 = PLANE('',#456); +#456 = AXIS2_PLACEMENT_3D('',#457,#458,#459); +#457 = CARTESIAN_POINT('',(-1.,-0.625,1.25)); +#458 = DIRECTION('',(0.,0.,1.)); +#459 = DIRECTION('',(1.,0.,-0.)); +#460 = DEFINITIONAL_REPRESENTATION('',(#461),#465); +#461 = LINE('',#462,#463); +#462 = CARTESIAN_POINT('',(0.,0.)); +#463 = VECTOR('',#464,1.); +#464 = DIRECTION('',(0.,1.)); +#465 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#466 = ORIENTED_EDGE('',*,*,#467,.F.); +#467 = EDGE_CURVE('',#260,#440,#468,.T.); +#468 = SURFACE_CURVE('',#469,(#474,#485),.PCURVE_S1.); +#469 = CIRCLE('',#470,4.E-02); +#470 = AXIS2_PLACEMENT_3D('',#471,#472,#473); +#471 = CARTESIAN_POINT('',(-1.,-0.585,1.21)); +#472 = DIRECTION('',(-1.,0.,0.)); +#473 = DIRECTION('',(0.,0.,1.)); +#474 = PCURVE('',#268,#475); +#475 = DEFINITIONAL_REPRESENTATION('',(#476),#484); +#476 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#477,#478,#479,#480,#481,#482 +,#483),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),( + -2.094395102393,0.,2.094395102393,4.188790204786,6.28318530718, +8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#477 = CARTESIAN_POINT('',(1.25,-4.E-02)); +#478 = CARTESIAN_POINT('',(1.25,-0.109282032303)); +#479 = CARTESIAN_POINT('',(1.19,-7.464101615138E-02)); +#480 = CARTESIAN_POINT('',(1.13,-4.E-02)); +#481 = CARTESIAN_POINT('',(1.19,-5.358983848622E-03)); +#482 = CARTESIAN_POINT('',(1.25,2.928203230276E-02)); +#483 = CARTESIAN_POINT('',(1.25,-4.E-02)); +#484 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#485 = PCURVE('',#486,#491); +#486 = CYLINDRICAL_SURFACE('',#487,4.E-02); +#487 = AXIS2_PLACEMENT_3D('',#488,#489,#490); +#488 = CARTESIAN_POINT('',(-1.,-0.585,1.21)); +#489 = DIRECTION('',(1.,0.,0.)); +#490 = DIRECTION('',(0.,-1.,0.)); +#491 = DEFINITIONAL_REPRESENTATION('',(#492),#496); +#492 = LINE('',#493,#494); +#493 = CARTESIAN_POINT('',(10.995574287564,0.)); +#494 = VECTOR('',#495,1.); +#495 = DIRECTION('',(-1.,0.)); +#496 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#497 = ADVANCED_FACE('',(#498),#280,.F.); +#498 = FACE_BOUND('',#499,.F.); +#499 = EDGE_LOOP('',(#500,#530,#551,#552)); +#500 = ORIENTED_EDGE('',*,*,#501,.F.); +#501 = EDGE_CURVE('',#502,#504,#506,.T.); +#502 = VERTEX_POINT('',#503); +#503 = CARTESIAN_POINT('',(-0.6,-0.625,4.E-02)); +#504 = VERTEX_POINT('',#505); +#505 = CARTESIAN_POINT('',(-0.6,-0.625,1.21)); +#506 = SURFACE_CURVE('',#507,(#511,#518),.PCURVE_S1.); +#507 = LINE('',#508,#509); +#508 = CARTESIAN_POINT('',(-0.6,-0.625,0.)); +#509 = VECTOR('',#510,1.); +#510 = DIRECTION('',(0.,0.,1.)); +#511 = PCURVE('',#280,#512); +#512 = DEFINITIONAL_REPRESENTATION('',(#513),#517); +#513 = LINE('',#514,#515); +#514 = CARTESIAN_POINT('',(0.,0.4)); +#515 = VECTOR('',#516,1.); +#516 = DIRECTION('',(1.,0.)); +#517 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#518 = PCURVE('',#519,#524); +#519 = PLANE('',#520); +#520 = AXIS2_PLACEMENT_3D('',#521,#522,#523); +#521 = CARTESIAN_POINT('',(-0.6,-0.625,0.)); +#522 = DIRECTION('',(1.,0.,0.)); +#523 = DIRECTION('',(0.,0.,1.)); +#524 = DEFINITIONAL_REPRESENTATION('',(#525),#529); +#525 = LINE('',#526,#527); +#526 = CARTESIAN_POINT('',(0.,0.)); +#527 = VECTOR('',#528,1.); +#528 = DIRECTION('',(1.,0.)); +#529 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#530 = ORIENTED_EDGE('',*,*,#531,.F.); +#531 = EDGE_CURVE('',#258,#502,#532,.T.); +#532 = SURFACE_CURVE('',#533,(#537,#544),.PCURVE_S1.); +#533 = LINE('',#534,#535); +#534 = CARTESIAN_POINT('',(-1.,-0.625,4.E-02)); +#535 = VECTOR('',#536,1.); +#536 = DIRECTION('',(1.,0.,0.)); +#537 = PCURVE('',#280,#538); +#538 = DEFINITIONAL_REPRESENTATION('',(#539),#543); +#539 = LINE('',#540,#541); +#540 = CARTESIAN_POINT('',(4.E-02,0.)); +#541 = VECTOR('',#542,1.); +#542 = DIRECTION('',(0.,1.)); +#543 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#544 = PCURVE('',#309,#545); +#545 = DEFINITIONAL_REPRESENTATION('',(#546),#550); +#546 = LINE('',#547,#548); +#547 = CARTESIAN_POINT('',(0.,0.)); +#548 = VECTOR('',#549,1.); +#549 = DIRECTION('',(0.,1.)); +#550 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#551 = ORIENTED_EDGE('',*,*,#257,.T.); +#552 = ORIENTED_EDGE('',*,*,#553,.T.); +#553 = EDGE_CURVE('',#260,#504,#554,.T.); +#554 = SURFACE_CURVE('',#555,(#559,#566),.PCURVE_S1.); +#555 = LINE('',#556,#557); +#556 = CARTESIAN_POINT('',(-1.,-0.625,1.21)); +#557 = VECTOR('',#558,1.); +#558 = DIRECTION('',(1.,0.,0.)); +#559 = PCURVE('',#280,#560); +#560 = DEFINITIONAL_REPRESENTATION('',(#561),#565); +#561 = LINE('',#562,#563); +#562 = CARTESIAN_POINT('',(1.21,0.)); +#563 = VECTOR('',#564,1.); +#564 = DIRECTION('',(0.,1.)); +#565 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#566 = PCURVE('',#486,#567); +#567 = DEFINITIONAL_REPRESENTATION('',(#568),#572); +#568 = LINE('',#569,#570); +#569 = CARTESIAN_POINT('',(6.28318530718,0.)); +#570 = VECTOR('',#571,1.); +#571 = DIRECTION('',(0.,1.)); +#572 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#573 = ADVANCED_FACE('',(#574),#309,.T.); +#574 = FACE_BOUND('',#575,.T.); +#575 = EDGE_LOOP('',(#576,#577,#600,#622)); +#576 = ORIENTED_EDGE('',*,*,#292,.T.); +#577 = ORIENTED_EDGE('',*,*,#578,.T.); +#578 = EDGE_CURVE('',#293,#579,#581,.T.); +#579 = VERTEX_POINT('',#580); +#580 = CARTESIAN_POINT('',(-0.6,-0.585,0.)); +#581 = SURFACE_CURVE('',#582,(#586,#593),.PCURVE_S1.); +#582 = LINE('',#583,#584); +#583 = CARTESIAN_POINT('',(-1.,-0.585,0.)); +#584 = VECTOR('',#585,1.); +#585 = DIRECTION('',(1.,0.,0.)); +#586 = PCURVE('',#309,#587); +#587 = DEFINITIONAL_REPRESENTATION('',(#588),#592); +#588 = LINE('',#589,#590); +#589 = CARTESIAN_POINT('',(1.570796326795,0.)); +#590 = VECTOR('',#591,1.); +#591 = DIRECTION('',(0.,1.)); +#592 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#593 = PCURVE('',#337,#594); +#594 = DEFINITIONAL_REPRESENTATION('',(#595),#599); +#595 = LINE('',#596,#597); +#596 = CARTESIAN_POINT('',(0.,4.E-02)); +#597 = VECTOR('',#598,1.); +#598 = DIRECTION('',(1.,0.)); +#599 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#600 = ORIENTED_EDGE('',*,*,#601,.F.); +#601 = EDGE_CURVE('',#502,#579,#602,.T.); +#602 = SURFACE_CURVE('',#603,(#608,#615),.PCURVE_S1.); +#603 = CIRCLE('',#604,4.E-02); +#604 = AXIS2_PLACEMENT_3D('',#605,#606,#607); +#605 = CARTESIAN_POINT('',(-0.6,-0.585,4.E-02)); +#606 = DIRECTION('',(1.,0.,-0.)); +#607 = DIRECTION('',(0.,0.,1.)); +#608 = PCURVE('',#309,#609); +#609 = DEFINITIONAL_REPRESENTATION('',(#610),#614); +#610 = LINE('',#611,#612); +#611 = CARTESIAN_POINT('',(-1.570796326795,0.4)); +#612 = VECTOR('',#613,1.); +#613 = DIRECTION('',(1.,0.)); +#614 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#615 = PCURVE('',#519,#616); +#616 = DEFINITIONAL_REPRESENTATION('',(#617),#621); +#617 = CIRCLE('',#618,4.E-02); +#618 = AXIS2_PLACEMENT_2D('',#619,#620); +#619 = CARTESIAN_POINT('',(4.E-02,-4.E-02)); +#620 = DIRECTION('',(1.,0.)); +#621 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#622 = ORIENTED_EDGE('',*,*,#531,.F.); +#623 = ADVANCED_FACE('',(#624),#486,.T.); +#624 = FACE_BOUND('',#625,.T.); +#625 = EDGE_LOOP('',(#626,#627,#655,#676)); +#626 = ORIENTED_EDGE('',*,*,#553,.T.); +#627 = ORIENTED_EDGE('',*,*,#628,.T.); +#628 = EDGE_CURVE('',#504,#629,#631,.T.); +#629 = VERTEX_POINT('',#630); +#630 = CARTESIAN_POINT('',(-0.6,-0.585,1.25)); +#631 = SURFACE_CURVE('',#632,(#637,#644),.PCURVE_S1.); +#632 = CIRCLE('',#633,4.E-02); +#633 = AXIS2_PLACEMENT_3D('',#634,#635,#636); +#634 = CARTESIAN_POINT('',(-0.6,-0.585,1.21)); +#635 = DIRECTION('',(-1.,0.,0.)); +#636 = DIRECTION('',(0.,0.,1.)); +#637 = PCURVE('',#486,#638); +#638 = DEFINITIONAL_REPRESENTATION('',(#639),#643); +#639 = LINE('',#640,#641); +#640 = CARTESIAN_POINT('',(10.995574287564,0.4)); +#641 = VECTOR('',#642,1.); +#642 = DIRECTION('',(-1.,0.)); +#643 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#644 = PCURVE('',#519,#645); +#645 = DEFINITIONAL_REPRESENTATION('',(#646),#654); +#646 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#647,#648,#649,#650,#651,#652 +,#653),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),( + -2.094395102393,0.,2.094395102393,4.188790204786,6.28318530718, +8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#647 = CARTESIAN_POINT('',(1.25,-4.E-02)); +#648 = CARTESIAN_POINT('',(1.25,-0.109282032303)); +#649 = CARTESIAN_POINT('',(1.19,-7.464101615138E-02)); +#650 = CARTESIAN_POINT('',(1.13,-4.E-02)); +#651 = CARTESIAN_POINT('',(1.19,-5.358983848622E-03)); +#652 = CARTESIAN_POINT('',(1.25,2.928203230276E-02)); +#653 = CARTESIAN_POINT('',(1.25,-4.E-02)); +#654 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#655 = ORIENTED_EDGE('',*,*,#656,.F.); +#656 = EDGE_CURVE('',#440,#629,#657,.T.); +#657 = SURFACE_CURVE('',#658,(#662,#669),.PCURVE_S1.); +#658 = LINE('',#659,#660); +#659 = CARTESIAN_POINT('',(-1.,-0.585,1.25)); +#660 = VECTOR('',#661,1.); +#661 = DIRECTION('',(1.,0.,0.)); +#662 = PCURVE('',#486,#663); +#663 = DEFINITIONAL_REPRESENTATION('',(#664),#668); +#664 = LINE('',#665,#666); +#665 = CARTESIAN_POINT('',(4.712388980385,0.)); +#666 = VECTOR('',#667,1.); +#667 = DIRECTION('',(0.,1.)); +#668 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#669 = PCURVE('',#455,#670); +#670 = DEFINITIONAL_REPRESENTATION('',(#671),#675); +#671 = LINE('',#672,#673); +#672 = CARTESIAN_POINT('',(0.,4.E-02)); +#673 = VECTOR('',#674,1.); +#674 = DIRECTION('',(1.,0.)); +#675 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#676 = ORIENTED_EDGE('',*,*,#467,.F.); +#677 = ADVANCED_FACE('',(#678),#337,.F.); +#678 = FACE_BOUND('',#679,.F.); +#679 = EDGE_LOOP('',(#680,#681,#682,#705)); +#680 = ORIENTED_EDGE('',*,*,#321,.F.); +#681 = ORIENTED_EDGE('',*,*,#578,.T.); +#682 = ORIENTED_EDGE('',*,*,#683,.T.); +#683 = EDGE_CURVE('',#579,#684,#686,.T.); +#684 = VERTEX_POINT('',#685); +#685 = CARTESIAN_POINT('',(-0.6,0.585,0.)); +#686 = SURFACE_CURVE('',#687,(#691,#698),.PCURVE_S1.); +#687 = LINE('',#688,#689); +#688 = CARTESIAN_POINT('',(-0.6,-0.625,0.)); +#689 = VECTOR('',#690,1.); +#690 = DIRECTION('',(0.,1.,0.)); +#691 = PCURVE('',#337,#692); +#692 = DEFINITIONAL_REPRESENTATION('',(#693),#697); +#693 = LINE('',#694,#695); +#694 = CARTESIAN_POINT('',(0.4,0.)); +#695 = VECTOR('',#696,1.); +#696 = DIRECTION('',(0.,1.)); +#697 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#698 = PCURVE('',#519,#699); +#699 = DEFINITIONAL_REPRESENTATION('',(#700),#704); +#700 = LINE('',#701,#702); +#701 = CARTESIAN_POINT('',(0.,0.)); +#702 = VECTOR('',#703,1.); +#703 = DIRECTION('',(0.,-1.)); +#704 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#705 = ORIENTED_EDGE('',*,*,#706,.F.); +#706 = EDGE_CURVE('',#322,#684,#707,.T.); +#707 = SURFACE_CURVE('',#708,(#712,#719),.PCURVE_S1.); +#708 = LINE('',#709,#710); +#709 = CARTESIAN_POINT('',(-1.,0.585,0.)); +#710 = VECTOR('',#711,1.); +#711 = DIRECTION('',(1.,0.,0.)); +#712 = PCURVE('',#337,#713); +#713 = DEFINITIONAL_REPRESENTATION('',(#714),#718); +#714 = LINE('',#715,#716); +#715 = CARTESIAN_POINT('',(0.,1.21)); +#716 = VECTOR('',#717,1.); +#717 = DIRECTION('',(1.,0.)); +#718 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#719 = PCURVE('',#370,#720); +#720 = DEFINITIONAL_REPRESENTATION('',(#721),#725); +#721 = LINE('',#722,#723); +#722 = CARTESIAN_POINT('',(4.712388980385,0.)); +#723 = VECTOR('',#724,1.); +#724 = DIRECTION('',(0.,1.)); +#725 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#726 = ADVANCED_FACE('',(#727),#455,.T.); +#727 = FACE_BOUND('',#728,.T.); +#728 = EDGE_LOOP('',(#729,#730,#731,#754)); +#729 = ORIENTED_EDGE('',*,*,#439,.F.); +#730 = ORIENTED_EDGE('',*,*,#656,.T.); +#731 = ORIENTED_EDGE('',*,*,#732,.T.); +#732 = EDGE_CURVE('',#629,#733,#735,.T.); +#733 = VERTEX_POINT('',#734); +#734 = CARTESIAN_POINT('',(-0.6,0.585,1.25)); +#735 = SURFACE_CURVE('',#736,(#740,#747),.PCURVE_S1.); +#736 = LINE('',#737,#738); +#737 = CARTESIAN_POINT('',(-0.6,-0.625,1.25)); +#738 = VECTOR('',#739,1.); +#739 = DIRECTION('',(0.,1.,0.)); +#740 = PCURVE('',#455,#741); +#741 = DEFINITIONAL_REPRESENTATION('',(#742),#746); +#742 = LINE('',#743,#744); +#743 = CARTESIAN_POINT('',(0.4,0.)); +#744 = VECTOR('',#745,1.); +#745 = DIRECTION('',(0.,1.)); +#746 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#747 = PCURVE('',#519,#748); +#748 = DEFINITIONAL_REPRESENTATION('',(#749),#753); +#749 = LINE('',#750,#751); +#750 = CARTESIAN_POINT('',(1.25,0.)); +#751 = VECTOR('',#752,1.); +#752 = DIRECTION('',(0.,-1.)); +#753 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#754 = ORIENTED_EDGE('',*,*,#755,.F.); +#755 = EDGE_CURVE('',#411,#733,#756,.T.); +#756 = SURFACE_CURVE('',#757,(#761,#768),.PCURVE_S1.); +#757 = LINE('',#758,#759); +#758 = CARTESIAN_POINT('',(-1.,0.585,1.25)); +#759 = VECTOR('',#760,1.); +#760 = DIRECTION('',(1.,0.,0.)); +#761 = PCURVE('',#455,#762); +#762 = DEFINITIONAL_REPRESENTATION('',(#763),#767); +#763 = LINE('',#764,#765); +#764 = CARTESIAN_POINT('',(0.,1.21)); +#765 = VECTOR('',#766,1.); +#766 = DIRECTION('',(1.,0.)); +#767 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#768 = PCURVE('',#427,#769); +#769 = DEFINITIONAL_REPRESENTATION('',(#770),#774); +#770 = LINE('',#771,#772); +#771 = CARTESIAN_POINT('',(1.570796326795,0.)); +#772 = VECTOR('',#773,1.); +#773 = DIRECTION('',(0.,1.)); +#774 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#775 = ADVANCED_FACE('',(#776),#370,.T.); +#776 = FACE_BOUND('',#777,.T.); +#777 = EDGE_LOOP('',(#778,#801,#827,#828)); +#778 = ORIENTED_EDGE('',*,*,#779,.T.); +#779 = EDGE_CURVE('',#350,#780,#782,.T.); +#780 = VERTEX_POINT('',#781); +#781 = CARTESIAN_POINT('',(-0.6,0.625,4.E-02)); +#782 = SURFACE_CURVE('',#783,(#787,#794),.PCURVE_S1.); +#783 = LINE('',#784,#785); +#784 = CARTESIAN_POINT('',(-1.,0.625,4.E-02)); +#785 = VECTOR('',#786,1.); +#786 = DIRECTION('',(1.,0.,0.)); +#787 = PCURVE('',#370,#788); +#788 = DEFINITIONAL_REPRESENTATION('',(#789),#793); +#789 = LINE('',#790,#791); +#790 = CARTESIAN_POINT('',(6.28318530718,0.)); +#791 = VECTOR('',#792,1.); +#792 = DIRECTION('',(0.,1.)); +#793 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#794 = PCURVE('',#398,#795); +#795 = DEFINITIONAL_REPRESENTATION('',(#796),#800); +#796 = LINE('',#797,#798); +#797 = CARTESIAN_POINT('',(4.E-02,0.)); +#798 = VECTOR('',#799,1.); +#799 = DIRECTION('',(0.,1.)); +#800 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#801 = ORIENTED_EDGE('',*,*,#802,.T.); +#802 = EDGE_CURVE('',#780,#684,#803,.T.); +#803 = SURFACE_CURVE('',#804,(#809,#816),.PCURVE_S1.); +#804 = CIRCLE('',#805,4.E-02); +#805 = AXIS2_PLACEMENT_3D('',#806,#807,#808); +#806 = CARTESIAN_POINT('',(-0.6,0.585,4.E-02)); +#807 = DIRECTION('',(-1.,0.,0.)); +#808 = DIRECTION('',(0.,0.,1.)); +#809 = PCURVE('',#370,#810); +#810 = DEFINITIONAL_REPRESENTATION('',(#811),#815); +#811 = LINE('',#812,#813); +#812 = CARTESIAN_POINT('',(7.853981633974,0.4)); +#813 = VECTOR('',#814,1.); +#814 = DIRECTION('',(-1.,0.)); +#815 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#816 = PCURVE('',#519,#817); +#817 = DEFINITIONAL_REPRESENTATION('',(#818),#826); +#818 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#819,#820,#821,#822,#823,#824 +,#825),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),( + -2.094395102393,0.,2.094395102393,4.188790204786,6.28318530718, +8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#819 = CARTESIAN_POINT('',(8.E-02,-1.21)); +#820 = CARTESIAN_POINT('',(8.E-02,-1.279282032303)); +#821 = CARTESIAN_POINT('',(2.E-02,-1.244641016151)); +#822 = CARTESIAN_POINT('',(-4.E-02,-1.21)); +#823 = CARTESIAN_POINT('',(2.E-02,-1.175358983849)); +#824 = CARTESIAN_POINT('',(8.E-02,-1.140717967697)); +#825 = CARTESIAN_POINT('',(8.E-02,-1.21)); +#826 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#827 = ORIENTED_EDGE('',*,*,#706,.F.); +#828 = ORIENTED_EDGE('',*,*,#349,.F.); +#829 = ADVANCED_FACE('',(#830),#427,.T.); +#830 = FACE_BOUND('',#831,.T.); +#831 = EDGE_LOOP('',(#832,#833,#834,#858)); +#832 = ORIENTED_EDGE('',*,*,#410,.T.); +#833 = ORIENTED_EDGE('',*,*,#755,.T.); +#834 = ORIENTED_EDGE('',*,*,#835,.F.); +#835 = EDGE_CURVE('',#836,#733,#838,.T.); +#836 = VERTEX_POINT('',#837); +#837 = CARTESIAN_POINT('',(-0.6,0.625,1.21)); +#838 = SURFACE_CURVE('',#839,(#844,#851),.PCURVE_S1.); +#839 = CIRCLE('',#840,4.E-02); +#840 = AXIS2_PLACEMENT_3D('',#841,#842,#843); +#841 = CARTESIAN_POINT('',(-0.6,0.585,1.21)); +#842 = DIRECTION('',(1.,0.,-0.)); +#843 = DIRECTION('',(0.,0.,1.)); +#844 = PCURVE('',#427,#845); +#845 = DEFINITIONAL_REPRESENTATION('',(#846),#850); +#846 = LINE('',#847,#848); +#847 = CARTESIAN_POINT('',(-4.712388980385,0.4)); +#848 = VECTOR('',#849,1.); +#849 = DIRECTION('',(1.,0.)); +#850 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#851 = PCURVE('',#519,#852); +#852 = DEFINITIONAL_REPRESENTATION('',(#853),#857); +#853 = CIRCLE('',#854,4.E-02); +#854 = AXIS2_PLACEMENT_2D('',#855,#856); +#855 = CARTESIAN_POINT('',(1.21,-1.21)); +#856 = DIRECTION('',(1.,0.)); +#857 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#858 = ORIENTED_EDGE('',*,*,#859,.F.); +#859 = EDGE_CURVE('',#383,#836,#860,.T.); +#860 = SURFACE_CURVE('',#861,(#865,#872),.PCURVE_S1.); +#861 = LINE('',#862,#863); +#862 = CARTESIAN_POINT('',(-1.,0.625,1.21)); +#863 = VECTOR('',#864,1.); +#864 = DIRECTION('',(1.,0.,0.)); +#865 = PCURVE('',#427,#866); +#866 = DEFINITIONAL_REPRESENTATION('',(#867),#871); +#867 = LINE('',#868,#869); +#868 = CARTESIAN_POINT('',(0.,0.)); +#869 = VECTOR('',#870,1.); +#870 = DIRECTION('',(0.,1.)); +#871 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#872 = PCURVE('',#398,#873); +#873 = DEFINITIONAL_REPRESENTATION('',(#874),#878); +#874 = LINE('',#875,#876); +#875 = CARTESIAN_POINT('',(1.21,0.)); +#876 = VECTOR('',#877,1.); +#877 = DIRECTION('',(0.,1.)); +#878 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#879 = ADVANCED_FACE('',(#880),#398,.T.); +#880 = FACE_BOUND('',#881,.T.); +#881 = EDGE_LOOP('',(#882,#903,#904,#905)); +#882 = ORIENTED_EDGE('',*,*,#883,.F.); +#883 = EDGE_CURVE('',#780,#836,#884,.T.); +#884 = SURFACE_CURVE('',#885,(#889,#896),.PCURVE_S1.); +#885 = LINE('',#886,#887); +#886 = CARTESIAN_POINT('',(-0.6,0.625,0.)); +#887 = VECTOR('',#888,1.); +#888 = DIRECTION('',(0.,0.,1.)); +#889 = PCURVE('',#398,#890); +#890 = DEFINITIONAL_REPRESENTATION('',(#891),#895); +#891 = LINE('',#892,#893); +#892 = CARTESIAN_POINT('',(0.,0.4)); +#893 = VECTOR('',#894,1.); +#894 = DIRECTION('',(1.,0.)); +#895 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#896 = PCURVE('',#519,#897); +#897 = DEFINITIONAL_REPRESENTATION('',(#898),#902); +#898 = LINE('',#899,#900); +#899 = CARTESIAN_POINT('',(0.,-1.25)); +#900 = VECTOR('',#901,1.); +#901 = DIRECTION('',(1.,0.)); +#902 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#903 = ORIENTED_EDGE('',*,*,#779,.F.); +#904 = ORIENTED_EDGE('',*,*,#382,.T.); +#905 = ORIENTED_EDGE('',*,*,#859,.T.); +#906 = ADVANCED_FACE('',(#907,#917),#519,.T.); +#907 = FACE_BOUND('',#908,.T.); +#908 = EDGE_LOOP('',(#909,#910,#911,#912,#913,#914,#915,#916)); +#909 = ORIENTED_EDGE('',*,*,#501,.F.); +#910 = ORIENTED_EDGE('',*,*,#601,.T.); +#911 = ORIENTED_EDGE('',*,*,#683,.T.); +#912 = ORIENTED_EDGE('',*,*,#802,.F.); +#913 = ORIENTED_EDGE('',*,*,#883,.T.); +#914 = ORIENTED_EDGE('',*,*,#835,.T.); +#915 = ORIENTED_EDGE('',*,*,#732,.F.); +#916 = ORIENTED_EDGE('',*,*,#628,.F.); +#917 = FACE_BOUND('',#918,.T.); +#918 = EDGE_LOOP('',(#919,#950,#978,#1011,#1039,#1068,#1096,#1129)); +#919 = ORIENTED_EDGE('',*,*,#920,.F.); +#920 = EDGE_CURVE('',#921,#923,#925,.T.); +#921 = VERTEX_POINT('',#922); +#922 = CARTESIAN_POINT('',(-0.6,-0.585,8.E-02)); +#923 = VERTEX_POINT('',#924); +#924 = CARTESIAN_POINT('',(-0.6,-0.545,4.E-02)); +#925 = SURFACE_CURVE('',#926,(#931,#938),.PCURVE_S1.); +#926 = CIRCLE('',#927,4.E-02); +#927 = AXIS2_PLACEMENT_3D('',#928,#929,#930); +#928 = CARTESIAN_POINT('',(-0.6,-0.545,8.E-02)); +#929 = DIRECTION('',(1.,0.,-0.)); +#930 = DIRECTION('',(0.,0.,1.)); +#931 = PCURVE('',#519,#932); +#932 = DEFINITIONAL_REPRESENTATION('',(#933),#937); +#933 = CIRCLE('',#934,4.E-02); +#934 = AXIS2_PLACEMENT_2D('',#935,#936); +#935 = CARTESIAN_POINT('',(8.E-02,-8.E-02)); +#936 = DIRECTION('',(1.,0.)); +#937 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#938 = PCURVE('',#939,#944); +#939 = CYLINDRICAL_SURFACE('',#940,4.E-02); +#940 = AXIS2_PLACEMENT_3D('',#941,#942,#943); +#941 = CARTESIAN_POINT('',(-0.6,-0.545,8.E-02)); +#942 = DIRECTION('',(1.,0.,0.)); +#943 = DIRECTION('',(0.,-1.,0.)); +#944 = DEFINITIONAL_REPRESENTATION('',(#945),#949); +#945 = LINE('',#946,#947); +#946 = CARTESIAN_POINT('',(-1.570796326795,0.)); +#947 = VECTOR('',#948,1.); +#948 = DIRECTION('',(1.,0.)); +#949 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#950 = ORIENTED_EDGE('',*,*,#951,.T.); +#951 = EDGE_CURVE('',#921,#952,#954,.T.); +#952 = VERTEX_POINT('',#953); +#953 = CARTESIAN_POINT('',(-0.6,-0.585,1.17)); +#954 = SURFACE_CURVE('',#955,(#959,#966),.PCURVE_S1.); +#955 = LINE('',#956,#957); +#956 = CARTESIAN_POINT('',(-0.6,-0.585,4.E-02)); +#957 = VECTOR('',#958,1.); +#958 = DIRECTION('',(0.,0.,1.)); +#959 = PCURVE('',#519,#960); +#960 = DEFINITIONAL_REPRESENTATION('',(#961),#965); +#961 = LINE('',#962,#963); +#962 = CARTESIAN_POINT('',(4.E-02,-4.E-02)); +#963 = VECTOR('',#964,1.); +#964 = DIRECTION('',(1.,0.)); +#965 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#966 = PCURVE('',#967,#972); +#967 = PLANE('',#968); +#968 = AXIS2_PLACEMENT_3D('',#969,#970,#971); +#969 = CARTESIAN_POINT('',(-0.6,-0.585,4.E-02)); +#970 = DIRECTION('',(0.,1.,0.)); +#971 = DIRECTION('',(0.,-0.,1.)); +#972 = DEFINITIONAL_REPRESENTATION('',(#973),#977); +#973 = LINE('',#974,#975); +#974 = CARTESIAN_POINT('',(0.,0.)); +#975 = VECTOR('',#976,1.); +#976 = DIRECTION('',(1.,0.)); +#977 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#978 = ORIENTED_EDGE('',*,*,#979,.T.); +#979 = EDGE_CURVE('',#952,#980,#982,.T.); +#980 = VERTEX_POINT('',#981); +#981 = CARTESIAN_POINT('',(-0.6,-0.545,1.21)); +#982 = SURFACE_CURVE('',#983,(#988,#999),.PCURVE_S1.); +#983 = CIRCLE('',#984,4.E-02); +#984 = AXIS2_PLACEMENT_3D('',#985,#986,#987); +#985 = CARTESIAN_POINT('',(-0.6,-0.545,1.17)); +#986 = DIRECTION('',(-1.,0.,0.)); +#987 = DIRECTION('',(0.,0.,1.)); +#988 = PCURVE('',#519,#989); +#989 = DEFINITIONAL_REPRESENTATION('',(#990),#998); +#990 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#991,#992,#993,#994,#995,#996 +,#997),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),( + -2.094395102393,0.,2.094395102393,4.188790204786,6.28318530718, +8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#991 = CARTESIAN_POINT('',(1.21,-8.E-02)); +#992 = CARTESIAN_POINT('',(1.21,-0.149282032303)); +#993 = CARTESIAN_POINT('',(1.15,-0.114641016151)); +#994 = CARTESIAN_POINT('',(1.09,-8.E-02)); +#995 = CARTESIAN_POINT('',(1.15,-4.535898384862E-02)); +#996 = CARTESIAN_POINT('',(1.21,-1.071796769724E-02)); +#997 = CARTESIAN_POINT('',(1.21,-8.E-02)); +#998 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#999 = PCURVE('',#1000,#1005); +#1000 = CYLINDRICAL_SURFACE('',#1001,4.E-02); +#1001 = AXIS2_PLACEMENT_3D('',#1002,#1003,#1004); +#1002 = CARTESIAN_POINT('',(-0.6,-0.545,1.17)); +#1003 = DIRECTION('',(1.,0.,0.)); +#1004 = DIRECTION('',(0.,-1.,0.)); +#1005 = DEFINITIONAL_REPRESENTATION('',(#1006),#1010); +#1006 = LINE('',#1007,#1008); +#1007 = CARTESIAN_POINT('',(10.995574287564,0.)); +#1008 = VECTOR('',#1009,1.); +#1009 = DIRECTION('',(-1.,0.)); +#1010 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1011 = ORIENTED_EDGE('',*,*,#1012,.T.); +#1012 = EDGE_CURVE('',#980,#1013,#1015,.T.); +#1013 = VERTEX_POINT('',#1014); +#1014 = CARTESIAN_POINT('',(-0.6,0.545,1.21)); +#1015 = SURFACE_CURVE('',#1016,(#1020,#1027),.PCURVE_S1.); +#1016 = LINE('',#1017,#1018); +#1017 = CARTESIAN_POINT('',(-0.6,-0.585,1.21)); +#1018 = VECTOR('',#1019,1.); +#1019 = DIRECTION('',(0.,1.,0.)); +#1020 = PCURVE('',#519,#1021); +#1021 = DEFINITIONAL_REPRESENTATION('',(#1022),#1026); +#1022 = LINE('',#1023,#1024); +#1023 = CARTESIAN_POINT('',(1.21,-4.E-02)); +#1024 = VECTOR('',#1025,1.); +#1025 = DIRECTION('',(0.,-1.)); +#1026 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1027 = PCURVE('',#1028,#1033); +#1028 = PLANE('',#1029); +#1029 = AXIS2_PLACEMENT_3D('',#1030,#1031,#1032); +#1030 = CARTESIAN_POINT('',(-0.6,-0.585,1.21)); +#1031 = DIRECTION('',(0.,0.,1.)); +#1032 = DIRECTION('',(1.,0.,-0.)); +#1033 = DEFINITIONAL_REPRESENTATION('',(#1034),#1038); +#1034 = LINE('',#1035,#1036); +#1035 = CARTESIAN_POINT('',(0.,0.)); +#1036 = VECTOR('',#1037,1.); +#1037 = DIRECTION('',(0.,1.)); +#1038 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1039 = ORIENTED_EDGE('',*,*,#1040,.F.); +#1040 = EDGE_CURVE('',#1041,#1013,#1043,.T.); +#1041 = VERTEX_POINT('',#1042); +#1042 = CARTESIAN_POINT('',(-0.6,0.585,1.17)); +#1043 = SURFACE_CURVE('',#1044,(#1049,#1056),.PCURVE_S1.); +#1044 = CIRCLE('',#1045,4.E-02); +#1045 = AXIS2_PLACEMENT_3D('',#1046,#1047,#1048); +#1046 = CARTESIAN_POINT('',(-0.6,0.545,1.17)); +#1047 = DIRECTION('',(1.,0.,-0.)); +#1048 = DIRECTION('',(0.,0.,1.)); +#1049 = PCURVE('',#519,#1050); +#1050 = DEFINITIONAL_REPRESENTATION('',(#1051),#1055); +#1051 = CIRCLE('',#1052,4.E-02); +#1052 = AXIS2_PLACEMENT_2D('',#1053,#1054); +#1053 = CARTESIAN_POINT('',(1.17,-1.17)); +#1054 = DIRECTION('',(1.,0.)); +#1055 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1056 = PCURVE('',#1057,#1062); +#1057 = CYLINDRICAL_SURFACE('',#1058,4.E-02); +#1058 = AXIS2_PLACEMENT_3D('',#1059,#1060,#1061); +#1059 = CARTESIAN_POINT('',(-0.6,0.545,1.17)); +#1060 = DIRECTION('',(1.,0.,0.)); +#1061 = DIRECTION('',(-0.,1.,0.)); +#1062 = DEFINITIONAL_REPRESENTATION('',(#1063),#1067); +#1063 = LINE('',#1064,#1065); +#1064 = CARTESIAN_POINT('',(-4.712388980385,0.)); +#1065 = VECTOR('',#1066,1.); +#1066 = DIRECTION('',(1.,0.)); +#1067 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1068 = ORIENTED_EDGE('',*,*,#1069,.F.); +#1069 = EDGE_CURVE('',#1070,#1041,#1072,.T.); +#1070 = VERTEX_POINT('',#1071); +#1071 = CARTESIAN_POINT('',(-0.6,0.585,8.E-02)); +#1072 = SURFACE_CURVE('',#1073,(#1077,#1084),.PCURVE_S1.); +#1073 = LINE('',#1074,#1075); +#1074 = CARTESIAN_POINT('',(-0.6,0.585,4.E-02)); +#1075 = VECTOR('',#1076,1.); +#1076 = DIRECTION('',(0.,0.,1.)); +#1077 = PCURVE('',#519,#1078); +#1078 = DEFINITIONAL_REPRESENTATION('',(#1079),#1083); +#1079 = LINE('',#1080,#1081); +#1080 = CARTESIAN_POINT('',(4.E-02,-1.21)); +#1081 = VECTOR('',#1082,1.); +#1082 = DIRECTION('',(1.,0.)); +#1083 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1084 = PCURVE('',#1085,#1090); +#1085 = PLANE('',#1086); +#1086 = AXIS2_PLACEMENT_3D('',#1087,#1088,#1089); +#1087 = CARTESIAN_POINT('',(-0.6,0.585,4.E-02)); +#1088 = DIRECTION('',(0.,1.,0.)); +#1089 = DIRECTION('',(0.,-0.,1.)); +#1090 = DEFINITIONAL_REPRESENTATION('',(#1091),#1095); +#1091 = LINE('',#1092,#1093); +#1092 = CARTESIAN_POINT('',(0.,0.)); +#1093 = VECTOR('',#1094,1.); +#1094 = DIRECTION('',(1.,0.)); +#1095 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1096 = ORIENTED_EDGE('',*,*,#1097,.T.); +#1097 = EDGE_CURVE('',#1070,#1098,#1100,.T.); +#1098 = VERTEX_POINT('',#1099); +#1099 = CARTESIAN_POINT('',(-0.6,0.545,4.E-02)); +#1100 = SURFACE_CURVE('',#1101,(#1106,#1117),.PCURVE_S1.); +#1101 = CIRCLE('',#1102,4.E-02); +#1102 = AXIS2_PLACEMENT_3D('',#1103,#1104,#1105); +#1103 = CARTESIAN_POINT('',(-0.6,0.545,8.E-02)); +#1104 = DIRECTION('',(-1.,0.,0.)); +#1105 = DIRECTION('',(0.,0.,1.)); +#1106 = PCURVE('',#519,#1107); +#1107 = DEFINITIONAL_REPRESENTATION('',(#1108),#1116); +#1108 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1109,#1110,#1111,#1112, +#1113,#1114,#1115),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#1109 = CARTESIAN_POINT('',(0.12,-1.17)); +#1110 = CARTESIAN_POINT('',(0.12,-1.239282032303)); +#1111 = CARTESIAN_POINT('',(6.E-02,-1.204641016151)); +#1112 = CARTESIAN_POINT('',(2.775557561563E-17,-1.17)); +#1113 = CARTESIAN_POINT('',(6.E-02,-1.135358983849)); +#1114 = CARTESIAN_POINT('',(0.12,-1.100717967697)); +#1115 = CARTESIAN_POINT('',(0.12,-1.17)); +#1116 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1117 = PCURVE('',#1118,#1123); +#1118 = CYLINDRICAL_SURFACE('',#1119,4.E-02); +#1119 = AXIS2_PLACEMENT_3D('',#1120,#1121,#1122); +#1120 = CARTESIAN_POINT('',(-0.6,0.545,8.E-02)); +#1121 = DIRECTION('',(1.,0.,0.)); +#1122 = DIRECTION('',(-0.,1.,0.)); +#1123 = DEFINITIONAL_REPRESENTATION('',(#1124),#1128); +#1124 = LINE('',#1125,#1126); +#1125 = CARTESIAN_POINT('',(7.853981633974,0.)); +#1126 = VECTOR('',#1127,1.); +#1127 = DIRECTION('',(-1.,0.)); +#1128 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1129 = ORIENTED_EDGE('',*,*,#1130,.F.); +#1130 = EDGE_CURVE('',#923,#1098,#1131,.T.); +#1131 = SURFACE_CURVE('',#1132,(#1136,#1143),.PCURVE_S1.); +#1132 = LINE('',#1133,#1134); +#1133 = CARTESIAN_POINT('',(-0.6,-0.585,4.E-02)); +#1134 = VECTOR('',#1135,1.); +#1135 = DIRECTION('',(0.,1.,0.)); +#1136 = PCURVE('',#519,#1137); +#1137 = DEFINITIONAL_REPRESENTATION('',(#1138),#1142); +#1138 = LINE('',#1139,#1140); +#1139 = CARTESIAN_POINT('',(4.E-02,-4.E-02)); +#1140 = VECTOR('',#1141,1.); +#1141 = DIRECTION('',(0.,-1.)); +#1142 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1143 = PCURVE('',#1144,#1149); +#1144 = PLANE('',#1145); +#1145 = AXIS2_PLACEMENT_3D('',#1146,#1147,#1148); +#1146 = CARTESIAN_POINT('',(-0.6,-0.585,4.E-02)); +#1147 = DIRECTION('',(0.,0.,1.)); +#1148 = DIRECTION('',(1.,0.,-0.)); +#1149 = DEFINITIONAL_REPRESENTATION('',(#1150),#1154); +#1150 = LINE('',#1151,#1152); +#1151 = CARTESIAN_POINT('',(0.,0.)); +#1152 = VECTOR('',#1153,1.); +#1153 = DIRECTION('',(0.,1.)); +#1154 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1155 = ADVANCED_FACE('',(#1156),#939,.T.); +#1156 = FACE_BOUND('',#1157,.T.); +#1157 = EDGE_LOOP('',(#1158,#1159,#1182,#1211)); +#1158 = ORIENTED_EDGE('',*,*,#920,.T.); +#1159 = ORIENTED_EDGE('',*,*,#1160,.T.); +#1160 = EDGE_CURVE('',#923,#1161,#1163,.T.); +#1161 = VERTEX_POINT('',#1162); +#1162 = CARTESIAN_POINT('',(0.6,-0.545,4.E-02)); +#1163 = SURFACE_CURVE('',#1164,(#1168,#1175),.PCURVE_S1.); +#1164 = LINE('',#1165,#1166); +#1165 = CARTESIAN_POINT('',(-0.6,-0.545,4.E-02)); +#1166 = VECTOR('',#1167,1.); +#1167 = DIRECTION('',(1.,0.,0.)); +#1168 = PCURVE('',#939,#1169); +#1169 = DEFINITIONAL_REPRESENTATION('',(#1170),#1174); +#1170 = LINE('',#1171,#1172); +#1171 = CARTESIAN_POINT('',(1.570796326795,0.)); +#1172 = VECTOR('',#1173,1.); +#1173 = DIRECTION('',(0.,1.)); +#1174 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1175 = PCURVE('',#1144,#1176); +#1176 = DEFINITIONAL_REPRESENTATION('',(#1177),#1181); +#1177 = LINE('',#1178,#1179); +#1178 = CARTESIAN_POINT('',(0.,4.E-02)); +#1179 = VECTOR('',#1180,1.); +#1180 = DIRECTION('',(1.,0.)); +#1181 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1182 = ORIENTED_EDGE('',*,*,#1183,.F.); +#1183 = EDGE_CURVE('',#1184,#1161,#1186,.T.); +#1184 = VERTEX_POINT('',#1185); +#1185 = CARTESIAN_POINT('',(0.6,-0.585,8.E-02)); +#1186 = SURFACE_CURVE('',#1187,(#1192,#1199),.PCURVE_S1.); +#1187 = CIRCLE('',#1188,4.E-02); +#1188 = AXIS2_PLACEMENT_3D('',#1189,#1190,#1191); +#1189 = CARTESIAN_POINT('',(0.6,-0.545,8.E-02)); +#1190 = DIRECTION('',(1.,0.,-0.)); +#1191 = DIRECTION('',(0.,0.,1.)); +#1192 = PCURVE('',#939,#1193); +#1193 = DEFINITIONAL_REPRESENTATION('',(#1194),#1198); +#1194 = LINE('',#1195,#1196); +#1195 = CARTESIAN_POINT('',(-1.570796326795,1.2)); +#1196 = VECTOR('',#1197,1.); +#1197 = DIRECTION('',(1.,0.)); +#1198 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1199 = PCURVE('',#1200,#1205); +#1200 = PLANE('',#1201); +#1201 = AXIS2_PLACEMENT_3D('',#1202,#1203,#1204); +#1202 = CARTESIAN_POINT('',(0.6,-0.625,0.)); +#1203 = DIRECTION('',(1.,0.,0.)); +#1204 = DIRECTION('',(0.,0.,1.)); +#1205 = DEFINITIONAL_REPRESENTATION('',(#1206),#1210); +#1206 = CIRCLE('',#1207,4.E-02); +#1207 = AXIS2_PLACEMENT_2D('',#1208,#1209); +#1208 = CARTESIAN_POINT('',(8.E-02,-8.E-02)); +#1209 = DIRECTION('',(1.,0.)); +#1210 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1211 = ORIENTED_EDGE('',*,*,#1212,.F.); +#1212 = EDGE_CURVE('',#921,#1184,#1213,.T.); +#1213 = SURFACE_CURVE('',#1214,(#1218,#1225),.PCURVE_S1.); +#1214 = LINE('',#1215,#1216); +#1215 = CARTESIAN_POINT('',(-0.6,-0.585,8.E-02)); +#1216 = VECTOR('',#1217,1.); +#1217 = DIRECTION('',(1.,0.,0.)); +#1218 = PCURVE('',#939,#1219); +#1219 = DEFINITIONAL_REPRESENTATION('',(#1220),#1224); +#1220 = LINE('',#1221,#1222); +#1221 = CARTESIAN_POINT('',(0.,0.)); +#1222 = VECTOR('',#1223,1.); +#1223 = DIRECTION('',(0.,1.)); +#1224 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1225 = PCURVE('',#967,#1226); +#1226 = DEFINITIONAL_REPRESENTATION('',(#1227),#1231); +#1227 = LINE('',#1228,#1229); +#1228 = CARTESIAN_POINT('',(4.E-02,0.)); +#1229 = VECTOR('',#1230,1.); +#1230 = DIRECTION('',(0.,1.)); +#1231 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1232 = ADVANCED_FACE('',(#1233),#1144,.F.); +#1233 = FACE_BOUND('',#1234,.F.); +#1234 = EDGE_LOOP('',(#1235,#1236,#1237,#1260)); +#1235 = ORIENTED_EDGE('',*,*,#1130,.F.); +#1236 = ORIENTED_EDGE('',*,*,#1160,.T.); +#1237 = ORIENTED_EDGE('',*,*,#1238,.T.); +#1238 = EDGE_CURVE('',#1161,#1239,#1241,.T.); +#1239 = VERTEX_POINT('',#1240); +#1240 = CARTESIAN_POINT('',(0.6,0.545,4.E-02)); +#1241 = SURFACE_CURVE('',#1242,(#1246,#1253),.PCURVE_S1.); +#1242 = LINE('',#1243,#1244); +#1243 = CARTESIAN_POINT('',(0.6,-0.585,4.E-02)); +#1244 = VECTOR('',#1245,1.); +#1245 = DIRECTION('',(0.,1.,0.)); +#1246 = PCURVE('',#1144,#1247); +#1247 = DEFINITIONAL_REPRESENTATION('',(#1248),#1252); +#1248 = LINE('',#1249,#1250); +#1249 = CARTESIAN_POINT('',(1.2,0.)); +#1250 = VECTOR('',#1251,1.); +#1251 = DIRECTION('',(0.,1.)); +#1252 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1253 = PCURVE('',#1200,#1254); +#1254 = DEFINITIONAL_REPRESENTATION('',(#1255),#1259); +#1255 = LINE('',#1256,#1257); +#1256 = CARTESIAN_POINT('',(4.E-02,-4.E-02)); +#1257 = VECTOR('',#1258,1.); +#1258 = DIRECTION('',(0.,-1.)); +#1259 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1260 = ORIENTED_EDGE('',*,*,#1261,.F.); +#1261 = EDGE_CURVE('',#1098,#1239,#1262,.T.); +#1262 = SURFACE_CURVE('',#1263,(#1267,#1274),.PCURVE_S1.); +#1263 = LINE('',#1264,#1265); +#1264 = CARTESIAN_POINT('',(-0.6,0.545,4.E-02)); +#1265 = VECTOR('',#1266,1.); +#1266 = DIRECTION('',(1.,0.,0.)); +#1267 = PCURVE('',#1144,#1268); +#1268 = DEFINITIONAL_REPRESENTATION('',(#1269),#1273); +#1269 = LINE('',#1270,#1271); +#1270 = CARTESIAN_POINT('',(0.,1.13)); +#1271 = VECTOR('',#1272,1.); +#1272 = DIRECTION('',(1.,0.)); +#1273 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1274 = PCURVE('',#1118,#1275); +#1275 = DEFINITIONAL_REPRESENTATION('',(#1276),#1280); +#1276 = LINE('',#1277,#1278); +#1277 = CARTESIAN_POINT('',(4.712388980385,0.)); +#1278 = VECTOR('',#1279,1.); +#1279 = DIRECTION('',(0.,1.)); +#1280 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1281 = ADVANCED_FACE('',(#1282),#1118,.T.); +#1282 = FACE_BOUND('',#1283,.T.); +#1283 = EDGE_LOOP('',(#1284,#1307,#1333,#1334)); +#1284 = ORIENTED_EDGE('',*,*,#1285,.T.); +#1285 = EDGE_CURVE('',#1070,#1286,#1288,.T.); +#1286 = VERTEX_POINT('',#1287); +#1287 = CARTESIAN_POINT('',(0.6,0.585,8.E-02)); +#1288 = SURFACE_CURVE('',#1289,(#1293,#1300),.PCURVE_S1.); +#1289 = LINE('',#1290,#1291); +#1290 = CARTESIAN_POINT('',(-0.6,0.585,8.E-02)); +#1291 = VECTOR('',#1292,1.); +#1292 = DIRECTION('',(1.,0.,0.)); +#1293 = PCURVE('',#1118,#1294); +#1294 = DEFINITIONAL_REPRESENTATION('',(#1295),#1299); +#1295 = LINE('',#1296,#1297); +#1296 = CARTESIAN_POINT('',(6.28318530718,0.)); +#1297 = VECTOR('',#1298,1.); +#1298 = DIRECTION('',(0.,1.)); +#1299 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1300 = PCURVE('',#1085,#1301); +#1301 = DEFINITIONAL_REPRESENTATION('',(#1302),#1306); +#1302 = LINE('',#1303,#1304); +#1303 = CARTESIAN_POINT('',(4.E-02,0.)); +#1304 = VECTOR('',#1305,1.); +#1305 = DIRECTION('',(0.,1.)); +#1306 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1307 = ORIENTED_EDGE('',*,*,#1308,.T.); +#1308 = EDGE_CURVE('',#1286,#1239,#1309,.T.); +#1309 = SURFACE_CURVE('',#1310,(#1315,#1322),.PCURVE_S1.); +#1310 = CIRCLE('',#1311,4.E-02); +#1311 = AXIS2_PLACEMENT_3D('',#1312,#1313,#1314); +#1312 = CARTESIAN_POINT('',(0.6,0.545,8.E-02)); +#1313 = DIRECTION('',(-1.,0.,0.)); +#1314 = DIRECTION('',(0.,0.,1.)); +#1315 = PCURVE('',#1118,#1316); +#1316 = DEFINITIONAL_REPRESENTATION('',(#1317),#1321); +#1317 = LINE('',#1318,#1319); +#1318 = CARTESIAN_POINT('',(7.853981633974,1.2)); +#1319 = VECTOR('',#1320,1.); +#1320 = DIRECTION('',(-1.,0.)); +#1321 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1322 = PCURVE('',#1200,#1323); +#1323 = DEFINITIONAL_REPRESENTATION('',(#1324),#1332); +#1324 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1325,#1326,#1327,#1328, +#1329,#1330,#1331),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#1325 = CARTESIAN_POINT('',(0.12,-1.17)); +#1326 = CARTESIAN_POINT('',(0.12,-1.239282032303)); +#1327 = CARTESIAN_POINT('',(6.E-02,-1.204641016151)); +#1328 = CARTESIAN_POINT('',(2.775557561563E-17,-1.17)); +#1329 = CARTESIAN_POINT('',(6.E-02,-1.135358983849)); +#1330 = CARTESIAN_POINT('',(0.12,-1.100717967697)); +#1331 = CARTESIAN_POINT('',(0.12,-1.17)); +#1332 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1333 = ORIENTED_EDGE('',*,*,#1261,.F.); +#1334 = ORIENTED_EDGE('',*,*,#1097,.F.); +#1335 = ADVANCED_FACE('',(#1336),#1085,.T.); +#1336 = FACE_BOUND('',#1337,.T.); +#1337 = EDGE_LOOP('',(#1338,#1361,#1362,#1363)); +#1338 = ORIENTED_EDGE('',*,*,#1339,.F.); +#1339 = EDGE_CURVE('',#1286,#1340,#1342,.T.); +#1340 = VERTEX_POINT('',#1341); +#1341 = CARTESIAN_POINT('',(0.6,0.585,1.17)); +#1342 = SURFACE_CURVE('',#1343,(#1347,#1354),.PCURVE_S1.); +#1343 = LINE('',#1344,#1345); +#1344 = CARTESIAN_POINT('',(0.6,0.585,4.E-02)); +#1345 = VECTOR('',#1346,1.); +#1346 = DIRECTION('',(0.,0.,1.)); +#1347 = PCURVE('',#1085,#1348); +#1348 = DEFINITIONAL_REPRESENTATION('',(#1349),#1353); +#1349 = LINE('',#1350,#1351); +#1350 = CARTESIAN_POINT('',(0.,1.2)); +#1351 = VECTOR('',#1352,1.); +#1352 = DIRECTION('',(1.,0.)); +#1353 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1354 = PCURVE('',#1200,#1355); +#1355 = DEFINITIONAL_REPRESENTATION('',(#1356),#1360); +#1356 = LINE('',#1357,#1358); +#1357 = CARTESIAN_POINT('',(4.E-02,-1.21)); +#1358 = VECTOR('',#1359,1.); +#1359 = DIRECTION('',(1.,0.)); +#1360 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1361 = ORIENTED_EDGE('',*,*,#1285,.F.); +#1362 = ORIENTED_EDGE('',*,*,#1069,.T.); +#1363 = ORIENTED_EDGE('',*,*,#1364,.T.); +#1364 = EDGE_CURVE('',#1041,#1340,#1365,.T.); +#1365 = SURFACE_CURVE('',#1366,(#1370,#1377),.PCURVE_S1.); +#1366 = LINE('',#1367,#1368); +#1367 = CARTESIAN_POINT('',(-0.6,0.585,1.17)); +#1368 = VECTOR('',#1369,1.); +#1369 = DIRECTION('',(1.,0.,0.)); +#1370 = PCURVE('',#1085,#1371); +#1371 = DEFINITIONAL_REPRESENTATION('',(#1372),#1376); +#1372 = LINE('',#1373,#1374); +#1373 = CARTESIAN_POINT('',(1.13,0.)); +#1374 = VECTOR('',#1375,1.); +#1375 = DIRECTION('',(0.,1.)); +#1376 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1377 = PCURVE('',#1057,#1378); +#1378 = DEFINITIONAL_REPRESENTATION('',(#1379),#1383); +#1379 = LINE('',#1380,#1381); +#1380 = CARTESIAN_POINT('',(0.,0.)); +#1381 = VECTOR('',#1382,1.); +#1382 = DIRECTION('',(0.,1.)); +#1383 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1384 = ADVANCED_FACE('',(#1385),#1057,.T.); +#1385 = FACE_BOUND('',#1386,.T.); +#1386 = EDGE_LOOP('',(#1387,#1388,#1411,#1433)); +#1387 = ORIENTED_EDGE('',*,*,#1040,.T.); +#1388 = ORIENTED_EDGE('',*,*,#1389,.T.); +#1389 = EDGE_CURVE('',#1013,#1390,#1392,.T.); +#1390 = VERTEX_POINT('',#1391); +#1391 = CARTESIAN_POINT('',(0.6,0.545,1.21)); +#1392 = SURFACE_CURVE('',#1393,(#1397,#1404),.PCURVE_S1.); +#1393 = LINE('',#1394,#1395); +#1394 = CARTESIAN_POINT('',(-0.6,0.545,1.21)); +#1395 = VECTOR('',#1396,1.); +#1396 = DIRECTION('',(1.,0.,0.)); +#1397 = PCURVE('',#1057,#1398); +#1398 = DEFINITIONAL_REPRESENTATION('',(#1399),#1403); +#1399 = LINE('',#1400,#1401); +#1400 = CARTESIAN_POINT('',(1.570796326795,0.)); +#1401 = VECTOR('',#1402,1.); +#1402 = DIRECTION('',(0.,1.)); +#1403 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1404 = PCURVE('',#1028,#1405); +#1405 = DEFINITIONAL_REPRESENTATION('',(#1406),#1410); +#1406 = LINE('',#1407,#1408); +#1407 = CARTESIAN_POINT('',(0.,1.13)); +#1408 = VECTOR('',#1409,1.); +#1409 = DIRECTION('',(1.,0.)); +#1410 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1411 = ORIENTED_EDGE('',*,*,#1412,.F.); +#1412 = EDGE_CURVE('',#1340,#1390,#1413,.T.); +#1413 = SURFACE_CURVE('',#1414,(#1419,#1426),.PCURVE_S1.); +#1414 = CIRCLE('',#1415,4.E-02); +#1415 = AXIS2_PLACEMENT_3D('',#1416,#1417,#1418); +#1416 = CARTESIAN_POINT('',(0.6,0.545,1.17)); +#1417 = DIRECTION('',(1.,0.,-0.)); +#1418 = DIRECTION('',(0.,0.,1.)); +#1419 = PCURVE('',#1057,#1420); +#1420 = DEFINITIONAL_REPRESENTATION('',(#1421),#1425); +#1421 = LINE('',#1422,#1423); +#1422 = CARTESIAN_POINT('',(-4.712388980385,1.2)); +#1423 = VECTOR('',#1424,1.); +#1424 = DIRECTION('',(1.,0.)); +#1425 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1426 = PCURVE('',#1200,#1427); +#1427 = DEFINITIONAL_REPRESENTATION('',(#1428),#1432); +#1428 = CIRCLE('',#1429,4.E-02); +#1429 = AXIS2_PLACEMENT_2D('',#1430,#1431); +#1430 = CARTESIAN_POINT('',(1.17,-1.17)); +#1431 = DIRECTION('',(1.,0.)); +#1432 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1433 = ORIENTED_EDGE('',*,*,#1364,.F.); +#1434 = ADVANCED_FACE('',(#1435),#1028,.T.); +#1435 = FACE_BOUND('',#1436,.T.); +#1436 = EDGE_LOOP('',(#1437,#1438,#1461,#1482)); +#1437 = ORIENTED_EDGE('',*,*,#1012,.F.); +#1438 = ORIENTED_EDGE('',*,*,#1439,.T.); +#1439 = EDGE_CURVE('',#980,#1440,#1442,.T.); +#1440 = VERTEX_POINT('',#1441); +#1441 = CARTESIAN_POINT('',(0.6,-0.545,1.21)); +#1442 = SURFACE_CURVE('',#1443,(#1447,#1454),.PCURVE_S1.); +#1443 = LINE('',#1444,#1445); +#1444 = CARTESIAN_POINT('',(-0.6,-0.545,1.21)); +#1445 = VECTOR('',#1446,1.); +#1446 = DIRECTION('',(1.,0.,0.)); +#1447 = PCURVE('',#1028,#1448); +#1448 = DEFINITIONAL_REPRESENTATION('',(#1449),#1453); +#1449 = LINE('',#1450,#1451); +#1450 = CARTESIAN_POINT('',(0.,4.E-02)); +#1451 = VECTOR('',#1452,1.); +#1452 = DIRECTION('',(1.,0.)); +#1453 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1454 = PCURVE('',#1000,#1455); +#1455 = DEFINITIONAL_REPRESENTATION('',(#1456),#1460); +#1456 = LINE('',#1457,#1458); +#1457 = CARTESIAN_POINT('',(4.712388980385,0.)); +#1458 = VECTOR('',#1459,1.); +#1459 = DIRECTION('',(0.,1.)); +#1460 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1461 = ORIENTED_EDGE('',*,*,#1462,.T.); +#1462 = EDGE_CURVE('',#1440,#1390,#1463,.T.); +#1463 = SURFACE_CURVE('',#1464,(#1468,#1475),.PCURVE_S1.); +#1464 = LINE('',#1465,#1466); +#1465 = CARTESIAN_POINT('',(0.6,-0.585,1.21)); +#1466 = VECTOR('',#1467,1.); +#1467 = DIRECTION('',(0.,1.,0.)); +#1468 = PCURVE('',#1028,#1469); +#1469 = DEFINITIONAL_REPRESENTATION('',(#1470),#1474); +#1470 = LINE('',#1471,#1472); +#1471 = CARTESIAN_POINT('',(1.2,0.)); +#1472 = VECTOR('',#1473,1.); +#1473 = DIRECTION('',(0.,1.)); +#1474 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1475 = PCURVE('',#1200,#1476); +#1476 = DEFINITIONAL_REPRESENTATION('',(#1477),#1481); +#1477 = LINE('',#1478,#1479); +#1478 = CARTESIAN_POINT('',(1.21,-4.E-02)); +#1479 = VECTOR('',#1480,1.); +#1480 = DIRECTION('',(0.,-1.)); +#1481 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1482 = ORIENTED_EDGE('',*,*,#1389,.F.); +#1483 = ADVANCED_FACE('',(#1484),#1000,.T.); +#1484 = FACE_BOUND('',#1485,.T.); +#1485 = EDGE_LOOP('',(#1486,#1509,#1535,#1536)); +#1486 = ORIENTED_EDGE('',*,*,#1487,.T.); +#1487 = EDGE_CURVE('',#952,#1488,#1490,.T.); +#1488 = VERTEX_POINT('',#1489); +#1489 = CARTESIAN_POINT('',(0.6,-0.585,1.17)); +#1490 = SURFACE_CURVE('',#1491,(#1495,#1502),.PCURVE_S1.); +#1491 = LINE('',#1492,#1493); +#1492 = CARTESIAN_POINT('',(-0.6,-0.585,1.17)); +#1493 = VECTOR('',#1494,1.); +#1494 = DIRECTION('',(1.,0.,0.)); +#1495 = PCURVE('',#1000,#1496); +#1496 = DEFINITIONAL_REPRESENTATION('',(#1497),#1501); +#1497 = LINE('',#1498,#1499); +#1498 = CARTESIAN_POINT('',(6.28318530718,0.)); +#1499 = VECTOR('',#1500,1.); +#1500 = DIRECTION('',(0.,1.)); +#1501 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1502 = PCURVE('',#967,#1503); +#1503 = DEFINITIONAL_REPRESENTATION('',(#1504),#1508); +#1504 = LINE('',#1505,#1506); +#1505 = CARTESIAN_POINT('',(1.13,0.)); +#1506 = VECTOR('',#1507,1.); +#1507 = DIRECTION('',(0.,1.)); +#1508 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1509 = ORIENTED_EDGE('',*,*,#1510,.T.); +#1510 = EDGE_CURVE('',#1488,#1440,#1511,.T.); +#1511 = SURFACE_CURVE('',#1512,(#1517,#1524),.PCURVE_S1.); +#1512 = CIRCLE('',#1513,4.E-02); +#1513 = AXIS2_PLACEMENT_3D('',#1514,#1515,#1516); +#1514 = CARTESIAN_POINT('',(0.6,-0.545,1.17)); +#1515 = DIRECTION('',(-1.,0.,0.)); +#1516 = DIRECTION('',(0.,0.,1.)); +#1517 = PCURVE('',#1000,#1518); +#1518 = DEFINITIONAL_REPRESENTATION('',(#1519),#1523); +#1519 = LINE('',#1520,#1521); +#1520 = CARTESIAN_POINT('',(10.995574287564,1.2)); +#1521 = VECTOR('',#1522,1.); +#1522 = DIRECTION('',(-1.,0.)); +#1523 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1524 = PCURVE('',#1200,#1525); +#1525 = DEFINITIONAL_REPRESENTATION('',(#1526),#1534); +#1526 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1527,#1528,#1529,#1530, +#1531,#1532,#1533),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#1527 = CARTESIAN_POINT('',(1.21,-8.E-02)); +#1528 = CARTESIAN_POINT('',(1.21,-0.149282032303)); +#1529 = CARTESIAN_POINT('',(1.15,-0.114641016151)); +#1530 = CARTESIAN_POINT('',(1.09,-8.E-02)); +#1531 = CARTESIAN_POINT('',(1.15,-4.535898384862E-02)); +#1532 = CARTESIAN_POINT('',(1.21,-1.071796769724E-02)); +#1533 = CARTESIAN_POINT('',(1.21,-8.E-02)); +#1534 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1535 = ORIENTED_EDGE('',*,*,#1439,.F.); +#1536 = ORIENTED_EDGE('',*,*,#979,.F.); +#1537 = ADVANCED_FACE('',(#1538),#967,.F.); +#1538 = FACE_BOUND('',#1539,.F.); +#1539 = EDGE_LOOP('',(#1540,#1561,#1562,#1563)); +#1540 = ORIENTED_EDGE('',*,*,#1541,.F.); +#1541 = EDGE_CURVE('',#1184,#1488,#1542,.T.); +#1542 = SURFACE_CURVE('',#1543,(#1547,#1554),.PCURVE_S1.); +#1543 = LINE('',#1544,#1545); +#1544 = CARTESIAN_POINT('',(0.6,-0.585,4.E-02)); +#1545 = VECTOR('',#1546,1.); +#1546 = DIRECTION('',(0.,0.,1.)); +#1547 = PCURVE('',#967,#1548); +#1548 = DEFINITIONAL_REPRESENTATION('',(#1549),#1553); +#1549 = LINE('',#1550,#1551); +#1550 = CARTESIAN_POINT('',(0.,1.2)); +#1551 = VECTOR('',#1552,1.); +#1552 = DIRECTION('',(1.,0.)); +#1553 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1554 = PCURVE('',#1200,#1555); +#1555 = DEFINITIONAL_REPRESENTATION('',(#1556),#1560); +#1556 = LINE('',#1557,#1558); +#1557 = CARTESIAN_POINT('',(4.E-02,-4.E-02)); +#1558 = VECTOR('',#1559,1.); +#1559 = DIRECTION('',(1.,0.)); +#1560 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1561 = ORIENTED_EDGE('',*,*,#1212,.F.); +#1562 = ORIENTED_EDGE('',*,*,#951,.T.); +#1563 = ORIENTED_EDGE('',*,*,#1487,.T.); +#1564 = ADVANCED_FACE('',(#1565,#1803),#1200,.F.); +#1565 = FACE_BOUND('',#1566,.F.); +#1566 = EDGE_LOOP('',(#1567,#1597,#1626,#1654,#1687,#1715,#1744,#1772)); +#1567 = ORIENTED_EDGE('',*,*,#1568,.F.); +#1568 = EDGE_CURVE('',#1569,#1571,#1573,.T.); +#1569 = VERTEX_POINT('',#1570); +#1570 = CARTESIAN_POINT('',(0.6,-0.625,4.E-02)); +#1571 = VERTEX_POINT('',#1572); +#1572 = CARTESIAN_POINT('',(0.6,-0.625,1.21)); +#1573 = SURFACE_CURVE('',#1574,(#1578,#1585),.PCURVE_S1.); +#1574 = LINE('',#1575,#1576); +#1575 = CARTESIAN_POINT('',(0.6,-0.625,0.)); +#1576 = VECTOR('',#1577,1.); +#1577 = DIRECTION('',(0.,0.,1.)); +#1578 = PCURVE('',#1200,#1579); +#1579 = DEFINITIONAL_REPRESENTATION('',(#1580),#1584); +#1580 = LINE('',#1581,#1582); +#1581 = CARTESIAN_POINT('',(0.,0.)); +#1582 = VECTOR('',#1583,1.); +#1583 = DIRECTION('',(1.,0.)); +#1584 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1585 = PCURVE('',#1586,#1591); +#1586 = PLANE('',#1587); +#1587 = AXIS2_PLACEMENT_3D('',#1588,#1589,#1590); +#1588 = CARTESIAN_POINT('',(0.6,-0.625,0.)); +#1589 = DIRECTION('',(0.,1.,0.)); +#1590 = DIRECTION('',(0.,-0.,1.)); +#1591 = DEFINITIONAL_REPRESENTATION('',(#1592),#1596); +#1592 = LINE('',#1593,#1594); +#1593 = CARTESIAN_POINT('',(0.,0.)); +#1594 = VECTOR('',#1595,1.); +#1595 = DIRECTION('',(1.,0.)); +#1596 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1597 = ORIENTED_EDGE('',*,*,#1598,.T.); +#1598 = EDGE_CURVE('',#1569,#1599,#1601,.T.); +#1599 = VERTEX_POINT('',#1600); +#1600 = CARTESIAN_POINT('',(0.6,-0.585,0.)); +#1601 = SURFACE_CURVE('',#1602,(#1607,#1614),.PCURVE_S1.); +#1602 = CIRCLE('',#1603,4.E-02); +#1603 = AXIS2_PLACEMENT_3D('',#1604,#1605,#1606); +#1604 = CARTESIAN_POINT('',(0.6,-0.585,4.E-02)); +#1605 = DIRECTION('',(1.,0.,-0.)); +#1606 = DIRECTION('',(0.,0.,1.)); +#1607 = PCURVE('',#1200,#1608); +#1608 = DEFINITIONAL_REPRESENTATION('',(#1609),#1613); +#1609 = CIRCLE('',#1610,4.E-02); +#1610 = AXIS2_PLACEMENT_2D('',#1611,#1612); +#1611 = CARTESIAN_POINT('',(4.E-02,-4.E-02)); +#1612 = DIRECTION('',(1.,0.)); +#1613 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1614 = PCURVE('',#1615,#1620); +#1615 = CYLINDRICAL_SURFACE('',#1616,4.E-02); +#1616 = AXIS2_PLACEMENT_3D('',#1617,#1618,#1619); +#1617 = CARTESIAN_POINT('',(0.6,-0.585,4.E-02)); +#1618 = DIRECTION('',(1.,0.,0.)); +#1619 = DIRECTION('',(0.,-1.,0.)); +#1620 = DEFINITIONAL_REPRESENTATION('',(#1621),#1625); +#1621 = LINE('',#1622,#1623); +#1622 = CARTESIAN_POINT('',(-1.570796326795,0.)); +#1623 = VECTOR('',#1624,1.); +#1624 = DIRECTION('',(1.,0.)); +#1625 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1626 = ORIENTED_EDGE('',*,*,#1627,.T.); +#1627 = EDGE_CURVE('',#1599,#1628,#1630,.T.); +#1628 = VERTEX_POINT('',#1629); +#1629 = CARTESIAN_POINT('',(0.6,0.585,0.)); +#1630 = SURFACE_CURVE('',#1631,(#1635,#1642),.PCURVE_S1.); +#1631 = LINE('',#1632,#1633); +#1632 = CARTESIAN_POINT('',(0.6,-0.625,0.)); +#1633 = VECTOR('',#1634,1.); +#1634 = DIRECTION('',(0.,1.,0.)); +#1635 = PCURVE('',#1200,#1636); +#1636 = DEFINITIONAL_REPRESENTATION('',(#1637),#1641); +#1637 = LINE('',#1638,#1639); +#1638 = CARTESIAN_POINT('',(0.,0.)); +#1639 = VECTOR('',#1640,1.); +#1640 = DIRECTION('',(0.,-1.)); +#1641 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1642 = PCURVE('',#1643,#1648); +#1643 = PLANE('',#1644); +#1644 = AXIS2_PLACEMENT_3D('',#1645,#1646,#1647); +#1645 = CARTESIAN_POINT('',(0.6,-0.625,0.)); +#1646 = DIRECTION('',(0.,0.,1.)); +#1647 = DIRECTION('',(1.,0.,-0.)); +#1648 = DEFINITIONAL_REPRESENTATION('',(#1649),#1653); +#1649 = LINE('',#1650,#1651); +#1650 = CARTESIAN_POINT('',(0.,0.)); +#1651 = VECTOR('',#1652,1.); +#1652 = DIRECTION('',(0.,1.)); +#1653 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1654 = ORIENTED_EDGE('',*,*,#1655,.F.); +#1655 = EDGE_CURVE('',#1656,#1628,#1658,.T.); +#1656 = VERTEX_POINT('',#1657); +#1657 = CARTESIAN_POINT('',(0.6,0.625,4.E-02)); +#1658 = SURFACE_CURVE('',#1659,(#1664,#1675),.PCURVE_S1.); +#1659 = CIRCLE('',#1660,4.E-02); +#1660 = AXIS2_PLACEMENT_3D('',#1661,#1662,#1663); +#1661 = CARTESIAN_POINT('',(0.6,0.585,4.E-02)); +#1662 = DIRECTION('',(-1.,0.,0.)); +#1663 = DIRECTION('',(0.,0.,1.)); +#1664 = PCURVE('',#1200,#1665); +#1665 = DEFINITIONAL_REPRESENTATION('',(#1666),#1674); +#1666 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1667,#1668,#1669,#1670, +#1671,#1672,#1673),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#1667 = CARTESIAN_POINT('',(8.E-02,-1.21)); +#1668 = CARTESIAN_POINT('',(8.E-02,-1.279282032303)); +#1669 = CARTESIAN_POINT('',(2.E-02,-1.244641016151)); +#1670 = CARTESIAN_POINT('',(-4.E-02,-1.21)); +#1671 = CARTESIAN_POINT('',(2.E-02,-1.175358983849)); +#1672 = CARTESIAN_POINT('',(8.E-02,-1.140717967697)); +#1673 = CARTESIAN_POINT('',(8.E-02,-1.21)); +#1674 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1675 = PCURVE('',#1676,#1681); +#1676 = CYLINDRICAL_SURFACE('',#1677,4.E-02); +#1677 = AXIS2_PLACEMENT_3D('',#1678,#1679,#1680); +#1678 = CARTESIAN_POINT('',(0.6,0.585,4.E-02)); +#1679 = DIRECTION('',(1.,0.,0.)); +#1680 = DIRECTION('',(-0.,1.,0.)); +#1681 = DEFINITIONAL_REPRESENTATION('',(#1682),#1686); +#1682 = LINE('',#1683,#1684); +#1683 = CARTESIAN_POINT('',(7.853981633974,0.)); +#1684 = VECTOR('',#1685,1.); +#1685 = DIRECTION('',(-1.,0.)); +#1686 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1687 = ORIENTED_EDGE('',*,*,#1688,.T.); +#1688 = EDGE_CURVE('',#1656,#1689,#1691,.T.); +#1689 = VERTEX_POINT('',#1690); +#1690 = CARTESIAN_POINT('',(0.6,0.625,1.21)); +#1691 = SURFACE_CURVE('',#1692,(#1696,#1703),.PCURVE_S1.); +#1692 = LINE('',#1693,#1694); +#1693 = CARTESIAN_POINT('',(0.6,0.625,0.)); +#1694 = VECTOR('',#1695,1.); +#1695 = DIRECTION('',(0.,0.,1.)); +#1696 = PCURVE('',#1200,#1697); +#1697 = DEFINITIONAL_REPRESENTATION('',(#1698),#1702); +#1698 = LINE('',#1699,#1700); +#1699 = CARTESIAN_POINT('',(0.,-1.25)); +#1700 = VECTOR('',#1701,1.); +#1701 = DIRECTION('',(1.,0.)); +#1702 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1703 = PCURVE('',#1704,#1709); +#1704 = PLANE('',#1705); +#1705 = AXIS2_PLACEMENT_3D('',#1706,#1707,#1708); +#1706 = CARTESIAN_POINT('',(0.6,0.625,0.)); +#1707 = DIRECTION('',(0.,1.,0.)); +#1708 = DIRECTION('',(0.,-0.,1.)); +#1709 = DEFINITIONAL_REPRESENTATION('',(#1710),#1714); +#1710 = LINE('',#1711,#1712); +#1711 = CARTESIAN_POINT('',(0.,0.)); +#1712 = VECTOR('',#1713,1.); +#1713 = DIRECTION('',(1.,0.)); +#1714 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1715 = ORIENTED_EDGE('',*,*,#1716,.T.); +#1716 = EDGE_CURVE('',#1689,#1717,#1719,.T.); +#1717 = VERTEX_POINT('',#1718); +#1718 = CARTESIAN_POINT('',(0.6,0.585,1.25)); +#1719 = SURFACE_CURVE('',#1720,(#1725,#1732),.PCURVE_S1.); +#1720 = CIRCLE('',#1721,4.E-02); +#1721 = AXIS2_PLACEMENT_3D('',#1722,#1723,#1724); +#1722 = CARTESIAN_POINT('',(0.6,0.585,1.21)); +#1723 = DIRECTION('',(1.,0.,-0.)); +#1724 = DIRECTION('',(0.,0.,1.)); +#1725 = PCURVE('',#1200,#1726); +#1726 = DEFINITIONAL_REPRESENTATION('',(#1727),#1731); +#1727 = CIRCLE('',#1728,4.E-02); +#1728 = AXIS2_PLACEMENT_2D('',#1729,#1730); +#1729 = CARTESIAN_POINT('',(1.21,-1.21)); +#1730 = DIRECTION('',(1.,0.)); +#1731 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1732 = PCURVE('',#1733,#1738); +#1733 = CYLINDRICAL_SURFACE('',#1734,4.E-02); +#1734 = AXIS2_PLACEMENT_3D('',#1735,#1736,#1737); +#1735 = CARTESIAN_POINT('',(0.6,0.585,1.21)); +#1736 = DIRECTION('',(1.,0.,0.)); +#1737 = DIRECTION('',(-0.,1.,0.)); +#1738 = DEFINITIONAL_REPRESENTATION('',(#1739),#1743); +#1739 = LINE('',#1740,#1741); +#1740 = CARTESIAN_POINT('',(-4.712388980385,0.)); +#1741 = VECTOR('',#1742,1.); +#1742 = DIRECTION('',(1.,0.)); +#1743 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1744 = ORIENTED_EDGE('',*,*,#1745,.F.); +#1745 = EDGE_CURVE('',#1746,#1717,#1748,.T.); +#1746 = VERTEX_POINT('',#1747); +#1747 = CARTESIAN_POINT('',(0.6,-0.585,1.25)); +#1748 = SURFACE_CURVE('',#1749,(#1753,#1760),.PCURVE_S1.); +#1749 = LINE('',#1750,#1751); +#1750 = CARTESIAN_POINT('',(0.6,-0.625,1.25)); +#1751 = VECTOR('',#1752,1.); +#1752 = DIRECTION('',(0.,1.,0.)); +#1753 = PCURVE('',#1200,#1754); +#1754 = DEFINITIONAL_REPRESENTATION('',(#1755),#1759); +#1755 = LINE('',#1756,#1757); +#1756 = CARTESIAN_POINT('',(1.25,0.)); +#1757 = VECTOR('',#1758,1.); +#1758 = DIRECTION('',(0.,-1.)); +#1759 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1760 = PCURVE('',#1761,#1766); +#1761 = PLANE('',#1762); +#1762 = AXIS2_PLACEMENT_3D('',#1763,#1764,#1765); +#1763 = CARTESIAN_POINT('',(0.6,-0.625,1.25)); +#1764 = DIRECTION('',(0.,0.,1.)); +#1765 = DIRECTION('',(1.,0.,-0.)); +#1766 = DEFINITIONAL_REPRESENTATION('',(#1767),#1771); +#1767 = LINE('',#1768,#1769); +#1768 = CARTESIAN_POINT('',(0.,0.)); +#1769 = VECTOR('',#1770,1.); +#1770 = DIRECTION('',(0.,1.)); +#1771 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1772 = ORIENTED_EDGE('',*,*,#1773,.F.); +#1773 = EDGE_CURVE('',#1571,#1746,#1774,.T.); +#1774 = SURFACE_CURVE('',#1775,(#1780,#1791),.PCURVE_S1.); +#1775 = CIRCLE('',#1776,4.E-02); +#1776 = AXIS2_PLACEMENT_3D('',#1777,#1778,#1779); +#1777 = CARTESIAN_POINT('',(0.6,-0.585,1.21)); +#1778 = DIRECTION('',(-1.,0.,0.)); +#1779 = DIRECTION('',(0.,0.,1.)); +#1780 = PCURVE('',#1200,#1781); +#1781 = DEFINITIONAL_REPRESENTATION('',(#1782),#1790); +#1782 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1783,#1784,#1785,#1786, +#1787,#1788,#1789),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#1783 = CARTESIAN_POINT('',(1.25,-4.E-02)); +#1784 = CARTESIAN_POINT('',(1.25,-0.109282032303)); +#1785 = CARTESIAN_POINT('',(1.19,-7.464101615138E-02)); +#1786 = CARTESIAN_POINT('',(1.13,-4.E-02)); +#1787 = CARTESIAN_POINT('',(1.19,-5.358983848622E-03)); +#1788 = CARTESIAN_POINT('',(1.25,2.928203230276E-02)); +#1789 = CARTESIAN_POINT('',(1.25,-4.E-02)); +#1790 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1791 = PCURVE('',#1792,#1797); +#1792 = CYLINDRICAL_SURFACE('',#1793,4.E-02); +#1793 = AXIS2_PLACEMENT_3D('',#1794,#1795,#1796); +#1794 = CARTESIAN_POINT('',(0.6,-0.585,1.21)); +#1795 = DIRECTION('',(1.,0.,0.)); +#1796 = DIRECTION('',(0.,-1.,0.)); +#1797 = DEFINITIONAL_REPRESENTATION('',(#1798),#1802); +#1798 = LINE('',#1799,#1800); +#1799 = CARTESIAN_POINT('',(10.995574287564,0.)); +#1800 = VECTOR('',#1801,1.); +#1801 = DIRECTION('',(-1.,0.)); +#1802 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1803 = FACE_BOUND('',#1804,.F.); +#1804 = EDGE_LOOP('',(#1805,#1806,#1807,#1808,#1809,#1810,#1811,#1812)); +#1805 = ORIENTED_EDGE('',*,*,#1183,.F.); +#1806 = ORIENTED_EDGE('',*,*,#1541,.T.); +#1807 = ORIENTED_EDGE('',*,*,#1510,.T.); +#1808 = ORIENTED_EDGE('',*,*,#1462,.T.); +#1809 = ORIENTED_EDGE('',*,*,#1412,.F.); +#1810 = ORIENTED_EDGE('',*,*,#1339,.F.); +#1811 = ORIENTED_EDGE('',*,*,#1308,.T.); +#1812 = ORIENTED_EDGE('',*,*,#1238,.F.); +#1813 = ADVANCED_FACE('',(#1814),#1586,.F.); +#1814 = FACE_BOUND('',#1815,.F.); +#1815 = EDGE_LOOP('',(#1816,#1846,#1867,#1868)); +#1816 = ORIENTED_EDGE('',*,*,#1817,.F.); +#1817 = EDGE_CURVE('',#1818,#1820,#1822,.T.); +#1818 = VERTEX_POINT('',#1819); +#1819 = CARTESIAN_POINT('',(1.,-0.625,4.E-02)); +#1820 = VERTEX_POINT('',#1821); +#1821 = CARTESIAN_POINT('',(1.,-0.625,1.21)); +#1822 = SURFACE_CURVE('',#1823,(#1827,#1834),.PCURVE_S1.); +#1823 = LINE('',#1824,#1825); +#1824 = CARTESIAN_POINT('',(1.,-0.625,0.)); +#1825 = VECTOR('',#1826,1.); +#1826 = DIRECTION('',(0.,0.,1.)); +#1827 = PCURVE('',#1586,#1828); +#1828 = DEFINITIONAL_REPRESENTATION('',(#1829),#1833); +#1829 = LINE('',#1830,#1831); +#1830 = CARTESIAN_POINT('',(0.,0.4)); +#1831 = VECTOR('',#1832,1.); +#1832 = DIRECTION('',(1.,0.)); +#1833 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1834 = PCURVE('',#1835,#1840); +#1835 = PLANE('',#1836); +#1836 = AXIS2_PLACEMENT_3D('',#1837,#1838,#1839); +#1837 = CARTESIAN_POINT('',(1.,-0.625,0.)); +#1838 = DIRECTION('',(1.,0.,0.)); +#1839 = DIRECTION('',(0.,0.,1.)); +#1840 = DEFINITIONAL_REPRESENTATION('',(#1841),#1845); +#1841 = LINE('',#1842,#1843); +#1842 = CARTESIAN_POINT('',(0.,0.)); +#1843 = VECTOR('',#1844,1.); +#1844 = DIRECTION('',(1.,0.)); +#1845 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1846 = ORIENTED_EDGE('',*,*,#1847,.F.); +#1847 = EDGE_CURVE('',#1569,#1818,#1848,.T.); +#1848 = SURFACE_CURVE('',#1849,(#1853,#1860),.PCURVE_S1.); +#1849 = LINE('',#1850,#1851); +#1850 = CARTESIAN_POINT('',(0.6,-0.625,4.E-02)); +#1851 = VECTOR('',#1852,1.); +#1852 = DIRECTION('',(1.,0.,0.)); +#1853 = PCURVE('',#1586,#1854); +#1854 = DEFINITIONAL_REPRESENTATION('',(#1855),#1859); +#1855 = LINE('',#1856,#1857); +#1856 = CARTESIAN_POINT('',(4.E-02,0.)); +#1857 = VECTOR('',#1858,1.); +#1858 = DIRECTION('',(0.,1.)); +#1859 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1860 = PCURVE('',#1615,#1861); +#1861 = DEFINITIONAL_REPRESENTATION('',(#1862),#1866); +#1862 = LINE('',#1863,#1864); +#1863 = CARTESIAN_POINT('',(0.,0.)); +#1864 = VECTOR('',#1865,1.); +#1865 = DIRECTION('',(0.,1.)); +#1866 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1867 = ORIENTED_EDGE('',*,*,#1568,.T.); +#1868 = ORIENTED_EDGE('',*,*,#1869,.T.); +#1869 = EDGE_CURVE('',#1571,#1820,#1870,.T.); +#1870 = SURFACE_CURVE('',#1871,(#1875,#1882),.PCURVE_S1.); +#1871 = LINE('',#1872,#1873); +#1872 = CARTESIAN_POINT('',(0.6,-0.625,1.21)); +#1873 = VECTOR('',#1874,1.); +#1874 = DIRECTION('',(1.,0.,0.)); +#1875 = PCURVE('',#1586,#1876); +#1876 = DEFINITIONAL_REPRESENTATION('',(#1877),#1881); +#1877 = LINE('',#1878,#1879); +#1878 = CARTESIAN_POINT('',(1.21,0.)); +#1879 = VECTOR('',#1880,1.); +#1880 = DIRECTION('',(0.,1.)); +#1881 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1882 = PCURVE('',#1792,#1883); +#1883 = DEFINITIONAL_REPRESENTATION('',(#1884),#1888); +#1884 = LINE('',#1885,#1886); +#1885 = CARTESIAN_POINT('',(6.28318530718,0.)); +#1886 = VECTOR('',#1887,1.); +#1887 = DIRECTION('',(0.,1.)); +#1888 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1889 = ADVANCED_FACE('',(#1890),#1615,.T.); +#1890 = FACE_BOUND('',#1891,.T.); +#1891 = EDGE_LOOP('',(#1892,#1893,#1916,#1938)); +#1892 = ORIENTED_EDGE('',*,*,#1598,.T.); +#1893 = ORIENTED_EDGE('',*,*,#1894,.T.); +#1894 = EDGE_CURVE('',#1599,#1895,#1897,.T.); +#1895 = VERTEX_POINT('',#1896); +#1896 = CARTESIAN_POINT('',(1.,-0.585,0.)); +#1897 = SURFACE_CURVE('',#1898,(#1902,#1909),.PCURVE_S1.); +#1898 = LINE('',#1899,#1900); +#1899 = CARTESIAN_POINT('',(0.6,-0.585,0.)); +#1900 = VECTOR('',#1901,1.); +#1901 = DIRECTION('',(1.,0.,0.)); +#1902 = PCURVE('',#1615,#1903); +#1903 = DEFINITIONAL_REPRESENTATION('',(#1904),#1908); +#1904 = LINE('',#1905,#1906); +#1905 = CARTESIAN_POINT('',(1.570796326795,0.)); +#1906 = VECTOR('',#1907,1.); +#1907 = DIRECTION('',(0.,1.)); +#1908 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1909 = PCURVE('',#1643,#1910); +#1910 = DEFINITIONAL_REPRESENTATION('',(#1911),#1915); +#1911 = LINE('',#1912,#1913); +#1912 = CARTESIAN_POINT('',(0.,4.E-02)); +#1913 = VECTOR('',#1914,1.); +#1914 = DIRECTION('',(1.,0.)); +#1915 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1916 = ORIENTED_EDGE('',*,*,#1917,.F.); +#1917 = EDGE_CURVE('',#1818,#1895,#1918,.T.); +#1918 = SURFACE_CURVE('',#1919,(#1924,#1931),.PCURVE_S1.); +#1919 = CIRCLE('',#1920,4.E-02); +#1920 = AXIS2_PLACEMENT_3D('',#1921,#1922,#1923); +#1921 = CARTESIAN_POINT('',(1.,-0.585,4.E-02)); +#1922 = DIRECTION('',(1.,0.,-0.)); +#1923 = DIRECTION('',(0.,0.,1.)); +#1924 = PCURVE('',#1615,#1925); +#1925 = DEFINITIONAL_REPRESENTATION('',(#1926),#1930); +#1926 = LINE('',#1927,#1928); +#1927 = CARTESIAN_POINT('',(-1.570796326795,0.4)); +#1928 = VECTOR('',#1929,1.); +#1929 = DIRECTION('',(1.,0.)); +#1930 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1931 = PCURVE('',#1835,#1932); +#1932 = DEFINITIONAL_REPRESENTATION('',(#1933),#1937); +#1933 = CIRCLE('',#1934,4.E-02); +#1934 = AXIS2_PLACEMENT_2D('',#1935,#1936); +#1935 = CARTESIAN_POINT('',(4.E-02,-4.E-02)); +#1936 = DIRECTION('',(1.,0.)); +#1937 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1938 = ORIENTED_EDGE('',*,*,#1847,.F.); +#1939 = ADVANCED_FACE('',(#1940),#1792,.T.); +#1940 = FACE_BOUND('',#1941,.T.); +#1941 = EDGE_LOOP('',(#1942,#1943,#1971,#1992)); +#1942 = ORIENTED_EDGE('',*,*,#1869,.T.); +#1943 = ORIENTED_EDGE('',*,*,#1944,.T.); +#1944 = EDGE_CURVE('',#1820,#1945,#1947,.T.); +#1945 = VERTEX_POINT('',#1946); +#1946 = CARTESIAN_POINT('',(1.,-0.585,1.25)); +#1947 = SURFACE_CURVE('',#1948,(#1953,#1960),.PCURVE_S1.); +#1948 = CIRCLE('',#1949,4.E-02); +#1949 = AXIS2_PLACEMENT_3D('',#1950,#1951,#1952); +#1950 = CARTESIAN_POINT('',(1.,-0.585,1.21)); +#1951 = DIRECTION('',(-1.,0.,0.)); +#1952 = DIRECTION('',(0.,0.,1.)); +#1953 = PCURVE('',#1792,#1954); +#1954 = DEFINITIONAL_REPRESENTATION('',(#1955),#1959); +#1955 = LINE('',#1956,#1957); +#1956 = CARTESIAN_POINT('',(10.995574287564,0.4)); +#1957 = VECTOR('',#1958,1.); +#1958 = DIRECTION('',(-1.,0.)); +#1959 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1960 = PCURVE('',#1835,#1961); +#1961 = DEFINITIONAL_REPRESENTATION('',(#1962),#1970); +#1962 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#1963,#1964,#1965,#1966, +#1967,#1968,#1969),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#1963 = CARTESIAN_POINT('',(1.25,-4.E-02)); +#1964 = CARTESIAN_POINT('',(1.25,-0.109282032303)); +#1965 = CARTESIAN_POINT('',(1.19,-7.464101615138E-02)); +#1966 = CARTESIAN_POINT('',(1.13,-4.E-02)); +#1967 = CARTESIAN_POINT('',(1.19,-5.358983848622E-03)); +#1968 = CARTESIAN_POINT('',(1.25,2.928203230276E-02)); +#1969 = CARTESIAN_POINT('',(1.25,-4.E-02)); +#1970 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1971 = ORIENTED_EDGE('',*,*,#1972,.F.); +#1972 = EDGE_CURVE('',#1746,#1945,#1973,.T.); +#1973 = SURFACE_CURVE('',#1974,(#1978,#1985),.PCURVE_S1.); +#1974 = LINE('',#1975,#1976); +#1975 = CARTESIAN_POINT('',(0.6,-0.585,1.25)); +#1976 = VECTOR('',#1977,1.); +#1977 = DIRECTION('',(1.,0.,0.)); +#1978 = PCURVE('',#1792,#1979); +#1979 = DEFINITIONAL_REPRESENTATION('',(#1980),#1984); +#1980 = LINE('',#1981,#1982); +#1981 = CARTESIAN_POINT('',(4.712388980385,0.)); +#1982 = VECTOR('',#1983,1.); +#1983 = DIRECTION('',(0.,1.)); +#1984 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1985 = PCURVE('',#1761,#1986); +#1986 = DEFINITIONAL_REPRESENTATION('',(#1987),#1991); +#1987 = LINE('',#1988,#1989); +#1988 = CARTESIAN_POINT('',(0.,4.E-02)); +#1989 = VECTOR('',#1990,1.); +#1990 = DIRECTION('',(1.,0.)); +#1991 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#1992 = ORIENTED_EDGE('',*,*,#1773,.F.); +#1993 = ADVANCED_FACE('',(#1994),#1643,.F.); +#1994 = FACE_BOUND('',#1995,.F.); +#1995 = EDGE_LOOP('',(#1996,#1997,#1998,#2021)); +#1996 = ORIENTED_EDGE('',*,*,#1627,.F.); +#1997 = ORIENTED_EDGE('',*,*,#1894,.T.); +#1998 = ORIENTED_EDGE('',*,*,#1999,.T.); +#1999 = EDGE_CURVE('',#1895,#2000,#2002,.T.); +#2000 = VERTEX_POINT('',#2001); +#2001 = CARTESIAN_POINT('',(1.,0.585,0.)); +#2002 = SURFACE_CURVE('',#2003,(#2007,#2014),.PCURVE_S1.); +#2003 = LINE('',#2004,#2005); +#2004 = CARTESIAN_POINT('',(1.,-0.625,0.)); +#2005 = VECTOR('',#2006,1.); +#2006 = DIRECTION('',(0.,1.,0.)); +#2007 = PCURVE('',#1643,#2008); +#2008 = DEFINITIONAL_REPRESENTATION('',(#2009),#2013); +#2009 = LINE('',#2010,#2011); +#2010 = CARTESIAN_POINT('',(0.4,0.)); +#2011 = VECTOR('',#2012,1.); +#2012 = DIRECTION('',(0.,1.)); +#2013 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2014 = PCURVE('',#1835,#2015); +#2015 = DEFINITIONAL_REPRESENTATION('',(#2016),#2020); +#2016 = LINE('',#2017,#2018); +#2017 = CARTESIAN_POINT('',(0.,0.)); +#2018 = VECTOR('',#2019,1.); +#2019 = DIRECTION('',(0.,-1.)); +#2020 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2021 = ORIENTED_EDGE('',*,*,#2022,.F.); +#2022 = EDGE_CURVE('',#1628,#2000,#2023,.T.); +#2023 = SURFACE_CURVE('',#2024,(#2028,#2035),.PCURVE_S1.); +#2024 = LINE('',#2025,#2026); +#2025 = CARTESIAN_POINT('',(0.6,0.585,0.)); +#2026 = VECTOR('',#2027,1.); +#2027 = DIRECTION('',(1.,0.,0.)); +#2028 = PCURVE('',#1643,#2029); +#2029 = DEFINITIONAL_REPRESENTATION('',(#2030),#2034); +#2030 = LINE('',#2031,#2032); +#2031 = CARTESIAN_POINT('',(0.,1.21)); +#2032 = VECTOR('',#2033,1.); +#2033 = DIRECTION('',(1.,0.)); +#2034 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2035 = PCURVE('',#1676,#2036); +#2036 = DEFINITIONAL_REPRESENTATION('',(#2037),#2041); +#2037 = LINE('',#2038,#2039); +#2038 = CARTESIAN_POINT('',(4.712388980385,0.)); +#2039 = VECTOR('',#2040,1.); +#2040 = DIRECTION('',(0.,1.)); +#2041 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2042 = ADVANCED_FACE('',(#2043),#1761,.T.); +#2043 = FACE_BOUND('',#2044,.T.); +#2044 = EDGE_LOOP('',(#2045,#2046,#2047,#2070)); +#2045 = ORIENTED_EDGE('',*,*,#1745,.F.); +#2046 = ORIENTED_EDGE('',*,*,#1972,.T.); +#2047 = ORIENTED_EDGE('',*,*,#2048,.T.); +#2048 = EDGE_CURVE('',#1945,#2049,#2051,.T.); +#2049 = VERTEX_POINT('',#2050); +#2050 = CARTESIAN_POINT('',(1.,0.585,1.25)); +#2051 = SURFACE_CURVE('',#2052,(#2056,#2063),.PCURVE_S1.); +#2052 = LINE('',#2053,#2054); +#2053 = CARTESIAN_POINT('',(1.,-0.625,1.25)); +#2054 = VECTOR('',#2055,1.); +#2055 = DIRECTION('',(0.,1.,0.)); +#2056 = PCURVE('',#1761,#2057); +#2057 = DEFINITIONAL_REPRESENTATION('',(#2058),#2062); +#2058 = LINE('',#2059,#2060); +#2059 = CARTESIAN_POINT('',(0.4,0.)); +#2060 = VECTOR('',#2061,1.); +#2061 = DIRECTION('',(0.,1.)); +#2062 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2063 = PCURVE('',#1835,#2064); +#2064 = DEFINITIONAL_REPRESENTATION('',(#2065),#2069); +#2065 = LINE('',#2066,#2067); +#2066 = CARTESIAN_POINT('',(1.25,0.)); +#2067 = VECTOR('',#2068,1.); +#2068 = DIRECTION('',(0.,-1.)); +#2069 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2070 = ORIENTED_EDGE('',*,*,#2071,.F.); +#2071 = EDGE_CURVE('',#1717,#2049,#2072,.T.); +#2072 = SURFACE_CURVE('',#2073,(#2077,#2084),.PCURVE_S1.); +#2073 = LINE('',#2074,#2075); +#2074 = CARTESIAN_POINT('',(0.6,0.585,1.25)); +#2075 = VECTOR('',#2076,1.); +#2076 = DIRECTION('',(1.,0.,0.)); +#2077 = PCURVE('',#1761,#2078); +#2078 = DEFINITIONAL_REPRESENTATION('',(#2079),#2083); +#2079 = LINE('',#2080,#2081); +#2080 = CARTESIAN_POINT('',(0.,1.21)); +#2081 = VECTOR('',#2082,1.); +#2082 = DIRECTION('',(1.,0.)); +#2083 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2084 = PCURVE('',#1733,#2085); +#2085 = DEFINITIONAL_REPRESENTATION('',(#2086),#2090); +#2086 = LINE('',#2087,#2088); +#2087 = CARTESIAN_POINT('',(1.570796326795,0.)); +#2088 = VECTOR('',#2089,1.); +#2089 = DIRECTION('',(0.,1.)); +#2090 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2091 = ADVANCED_FACE('',(#2092),#1676,.T.); +#2092 = FACE_BOUND('',#2093,.T.); +#2093 = EDGE_LOOP('',(#2094,#2117,#2143,#2144)); +#2094 = ORIENTED_EDGE('',*,*,#2095,.T.); +#2095 = EDGE_CURVE('',#1656,#2096,#2098,.T.); +#2096 = VERTEX_POINT('',#2097); +#2097 = CARTESIAN_POINT('',(1.,0.625,4.E-02)); +#2098 = SURFACE_CURVE('',#2099,(#2103,#2110),.PCURVE_S1.); +#2099 = LINE('',#2100,#2101); +#2100 = CARTESIAN_POINT('',(0.6,0.625,4.E-02)); +#2101 = VECTOR('',#2102,1.); +#2102 = DIRECTION('',(1.,0.,0.)); +#2103 = PCURVE('',#1676,#2104); +#2104 = DEFINITIONAL_REPRESENTATION('',(#2105),#2109); +#2105 = LINE('',#2106,#2107); +#2106 = CARTESIAN_POINT('',(6.28318530718,0.)); +#2107 = VECTOR('',#2108,1.); +#2108 = DIRECTION('',(0.,1.)); +#2109 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2110 = PCURVE('',#1704,#2111); +#2111 = DEFINITIONAL_REPRESENTATION('',(#2112),#2116); +#2112 = LINE('',#2113,#2114); +#2113 = CARTESIAN_POINT('',(4.E-02,0.)); +#2114 = VECTOR('',#2115,1.); +#2115 = DIRECTION('',(0.,1.)); +#2116 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2117 = ORIENTED_EDGE('',*,*,#2118,.T.); +#2118 = EDGE_CURVE('',#2096,#2000,#2119,.T.); +#2119 = SURFACE_CURVE('',#2120,(#2125,#2132),.PCURVE_S1.); +#2120 = CIRCLE('',#2121,4.E-02); +#2121 = AXIS2_PLACEMENT_3D('',#2122,#2123,#2124); +#2122 = CARTESIAN_POINT('',(1.,0.585,4.E-02)); +#2123 = DIRECTION('',(-1.,0.,0.)); +#2124 = DIRECTION('',(0.,0.,1.)); +#2125 = PCURVE('',#1676,#2126); +#2126 = DEFINITIONAL_REPRESENTATION('',(#2127),#2131); +#2127 = LINE('',#2128,#2129); +#2128 = CARTESIAN_POINT('',(7.853981633974,0.4)); +#2129 = VECTOR('',#2130,1.); +#2130 = DIRECTION('',(-1.,0.)); +#2131 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2132 = PCURVE('',#1835,#2133); +#2133 = DEFINITIONAL_REPRESENTATION('',(#2134),#2142); +#2134 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2135,#2136,#2137,#2138, +#2139,#2140,#2141),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#2135 = CARTESIAN_POINT('',(8.E-02,-1.21)); +#2136 = CARTESIAN_POINT('',(8.E-02,-1.279282032303)); +#2137 = CARTESIAN_POINT('',(2.E-02,-1.244641016151)); +#2138 = CARTESIAN_POINT('',(-4.E-02,-1.21)); +#2139 = CARTESIAN_POINT('',(2.E-02,-1.175358983849)); +#2140 = CARTESIAN_POINT('',(8.E-02,-1.140717967697)); +#2141 = CARTESIAN_POINT('',(8.E-02,-1.21)); +#2142 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2143 = ORIENTED_EDGE('',*,*,#2022,.F.); +#2144 = ORIENTED_EDGE('',*,*,#1655,.F.); +#2145 = ADVANCED_FACE('',(#2146),#1733,.T.); +#2146 = FACE_BOUND('',#2147,.T.); +#2147 = EDGE_LOOP('',(#2148,#2149,#2150,#2174)); +#2148 = ORIENTED_EDGE('',*,*,#1716,.T.); +#2149 = ORIENTED_EDGE('',*,*,#2071,.T.); +#2150 = ORIENTED_EDGE('',*,*,#2151,.F.); +#2151 = EDGE_CURVE('',#2152,#2049,#2154,.T.); +#2152 = VERTEX_POINT('',#2153); +#2153 = CARTESIAN_POINT('',(1.,0.625,1.21)); +#2154 = SURFACE_CURVE('',#2155,(#2160,#2167),.PCURVE_S1.); +#2155 = CIRCLE('',#2156,4.E-02); +#2156 = AXIS2_PLACEMENT_3D('',#2157,#2158,#2159); +#2157 = CARTESIAN_POINT('',(1.,0.585,1.21)); +#2158 = DIRECTION('',(1.,0.,-0.)); +#2159 = DIRECTION('',(0.,0.,1.)); +#2160 = PCURVE('',#1733,#2161); +#2161 = DEFINITIONAL_REPRESENTATION('',(#2162),#2166); +#2162 = LINE('',#2163,#2164); +#2163 = CARTESIAN_POINT('',(-4.712388980385,0.4)); +#2164 = VECTOR('',#2165,1.); +#2165 = DIRECTION('',(1.,0.)); +#2166 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2167 = PCURVE('',#1835,#2168); +#2168 = DEFINITIONAL_REPRESENTATION('',(#2169),#2173); +#2169 = CIRCLE('',#2170,4.E-02); +#2170 = AXIS2_PLACEMENT_2D('',#2171,#2172); +#2171 = CARTESIAN_POINT('',(1.21,-1.21)); +#2172 = DIRECTION('',(1.,0.)); +#2173 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2174 = ORIENTED_EDGE('',*,*,#2175,.F.); +#2175 = EDGE_CURVE('',#1689,#2152,#2176,.T.); +#2176 = SURFACE_CURVE('',#2177,(#2181,#2188),.PCURVE_S1.); +#2177 = LINE('',#2178,#2179); +#2178 = CARTESIAN_POINT('',(0.6,0.625,1.21)); +#2179 = VECTOR('',#2180,1.); +#2180 = DIRECTION('',(1.,0.,0.)); +#2181 = PCURVE('',#1733,#2182); +#2182 = DEFINITIONAL_REPRESENTATION('',(#2183),#2187); +#2183 = LINE('',#2184,#2185); +#2184 = CARTESIAN_POINT('',(0.,0.)); +#2185 = VECTOR('',#2186,1.); +#2186 = DIRECTION('',(0.,1.)); +#2187 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2188 = PCURVE('',#1704,#2189); +#2189 = DEFINITIONAL_REPRESENTATION('',(#2190),#2194); +#2190 = LINE('',#2191,#2192); +#2191 = CARTESIAN_POINT('',(1.21,0.)); +#2192 = VECTOR('',#2193,1.); +#2193 = DIRECTION('',(0.,1.)); +#2194 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2195 = ADVANCED_FACE('',(#2196),#1704,.T.); +#2196 = FACE_BOUND('',#2197,.T.); +#2197 = EDGE_LOOP('',(#2198,#2219,#2220,#2221)); +#2198 = ORIENTED_EDGE('',*,*,#2199,.F.); +#2199 = EDGE_CURVE('',#2096,#2152,#2200,.T.); +#2200 = SURFACE_CURVE('',#2201,(#2205,#2212),.PCURVE_S1.); +#2201 = LINE('',#2202,#2203); +#2202 = CARTESIAN_POINT('',(1.,0.625,0.)); +#2203 = VECTOR('',#2204,1.); +#2204 = DIRECTION('',(0.,0.,1.)); +#2205 = PCURVE('',#1704,#2206); +#2206 = DEFINITIONAL_REPRESENTATION('',(#2207),#2211); +#2207 = LINE('',#2208,#2209); +#2208 = CARTESIAN_POINT('',(0.,0.4)); +#2209 = VECTOR('',#2210,1.); +#2210 = DIRECTION('',(1.,0.)); +#2211 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2212 = PCURVE('',#1835,#2213); +#2213 = DEFINITIONAL_REPRESENTATION('',(#2214),#2218); +#2214 = LINE('',#2215,#2216); +#2215 = CARTESIAN_POINT('',(0.,-1.25)); +#2216 = VECTOR('',#2217,1.); +#2217 = DIRECTION('',(1.,0.)); +#2218 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2219 = ORIENTED_EDGE('',*,*,#2095,.F.); +#2220 = ORIENTED_EDGE('',*,*,#1688,.T.); +#2221 = ORIENTED_EDGE('',*,*,#2175,.T.); +#2222 = ADVANCED_FACE('',(#2223),#1835,.T.); +#2223 = FACE_BOUND('',#2224,.T.); +#2224 = EDGE_LOOP('',(#2225,#2226,#2227,#2228,#2229,#2230,#2231,#2232)); +#2225 = ORIENTED_EDGE('',*,*,#1817,.F.); +#2226 = ORIENTED_EDGE('',*,*,#1917,.T.); +#2227 = ORIENTED_EDGE('',*,*,#1999,.T.); +#2228 = ORIENTED_EDGE('',*,*,#2118,.F.); +#2229 = ORIENTED_EDGE('',*,*,#2199,.T.); +#2230 = ORIENTED_EDGE('',*,*,#2151,.T.); +#2231 = ORIENTED_EDGE('',*,*,#2048,.F.); +#2232 = ORIENTED_EDGE('',*,*,#1944,.F.); +#2233 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#2237)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#2234,#2235,#2236)) REPRESENTATION_CONTEXT +('Context #1','3D Context with UNIT and UNCERTAINTY') ); +#2234 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#2235 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#2236 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#2237 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-02),#2234, + 'distance_accuracy_value','confusion accuracy'); +#2238 = SHAPE_DEFINITION_REPRESENTATION(#2239,#250); +#2239 = PRODUCT_DEFINITION_SHAPE('','',#2240); +#2240 = PRODUCT_DEFINITION('design','',#2241,#2244); +#2241 = PRODUCT_DEFINITION_FORMATION('','',#2242); +#2242 = PRODUCT('SOLID','SOLID','',(#2243)); +#2243 = PRODUCT_CONTEXT('',#2,'mechanical'); +#2244 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#2245 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#2246,#2248); +#2246 = ( REPRESENTATION_RELATIONSHIP('','',#250,#240) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#2247) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#2247 = ITEM_DEFINED_TRANSFORMATION('','',#11,#241); +#2248 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #2249); +#2249 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('1','=>[0:1:1:3]','',#235,#2240,$ + ); +#2250 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#2242)); +#2251 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#2252,#2254); +#2252 = ( REPRESENTATION_RELATIONSHIP('','',#240,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#2253) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#2253 = ITEM_DEFINED_TRANSFORMATION('','',#11,#15); +#2254 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #2255); +#2255 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('2','','',#5,#235,$); +#2256 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#237)); +#2257 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#2258,#2260); +#2258 = ( REPRESENTATION_RELATIONSHIP('','',#240,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#2259) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#2259 = ITEM_DEFINED_TRANSFORMATION('','',#11,#19); +#2260 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #2261); +#2261 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('3','','',#5,#235,$); +#2262 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#2263,#2265); +#2263 = ( REPRESENTATION_RELATIONSHIP('','',#240,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#2264) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#2264 = ITEM_DEFINED_TRANSFORMATION('','',#11,#23); +#2265 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #2266); +#2266 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('4','','',#5,#235,$); +#2267 = SHAPE_DEFINITION_REPRESENTATION(#2268,#2274); +#2268 = PRODUCT_DEFINITION_SHAPE('','',#2269); +#2269 = PRODUCT_DEFINITION('design','',#2270,#2273); +#2270 = PRODUCT_DEFINITION_FORMATION('','',#2271); +#2271 = PRODUCT('SOIC-14_3.9x8.7mm_P1.27mm','SOIC-14_3.9x8.7mm_P1.27mm', + '',(#2272)); +#2272 = PRODUCT_CONTEXT('',#2,'mechanical'); +#2273 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#2274 = SHAPE_REPRESENTATION('',(#11,#2275),#2279); +#2275 = AXIS2_PLACEMENT_3D('',#2276,#2277,#2278); +#2276 = CARTESIAN_POINT('',(0.,0.,0.)); +#2277 = DIRECTION('',(0.,0.,1.)); +#2278 = DIRECTION('',(1.,0.,-0.)); +#2279 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#2283)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#2280,#2281,#2282)) REPRESENTATION_CONTEXT +('Context #1','3D Context with UNIT and UNCERTAINTY') ); +#2280 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#2281 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#2282 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#2283 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-02),#2280, + 'distance_accuracy_value','confusion accuracy'); +#2284 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#2285),#19571); +#2285 = MANIFOLD_SOLID_BREP('',#2286); +#2286 = CLOSED_SHELL('',(#2287,#2417,#2493,#2569,#2827,#3050,#3515,#3542 + ,#3598,#3699,#3726,#3753,#3780,#3807,#3834,#3841,#3895,#4076,#4124, + #4177,#4255,#4336,#4417,#4498,#4579,#4660,#4741,#4822,#4903,#4984, + #5065,#5141,#5197,#5244,#5650,#5676,#5961,#6009,#6062,#6115,#6560, + #6592,#6643,#6928,#6973,#7218,#7245,#7530,#7575,#7629,#7847,#8092, + #8119,#8164,#8449,#8734,#8779,#8833,#9051,#9296,#9323,#9368,#9653, + #9898,#9943,#9970,#10022,#10068,#10120,#10306,#10353,#10382,#10411, + #10440,#10469,#10498,#10527,#10554,#10581,#10608,#10635,#10662, + #10689,#10716,#10723,#10774,#10825,#10884,#10962,#11043,#11124, + #11205,#11286,#11367,#11448,#11529,#11610,#11691,#11772,#11853, + #11934,#12010,#12042,#12068,#12095,#12122,#12149,#12176,#12203, + #12230,#12257,#12264,#12291,#12318,#12345,#12372,#12399,#12426, + #12453,#12460,#12487,#12514,#12541,#12568,#12595,#12622,#12649, + #12656,#12683,#12710,#12737,#12764,#12791,#12818,#12845,#12852, + #12879,#12906,#12933,#12960,#12987,#13014,#13041,#13048,#13095, + #13121,#13168,#13565,#13612,#13638,#13693,#13719,#13745,#13771, + #14056,#14341,#14386,#14440,#14658,#14903,#14930,#14975,#15260, + #15545,#15590,#15644,#15862,#16107,#16134,#16179,#16464,#16749, + #16794,#16848,#17066,#17311,#17338,#17383,#17668,#17913,#17958, + #17985,#17992,#18021,#18050,#18079,#18108,#18137,#18166,#18195, + #18199,#18226,#18253,#18280,#18307,#18334,#18361,#18388,#18395, + #18422,#18449,#18476,#18503,#18530,#18557,#18584,#18591,#18618, + #18645,#18672,#18699,#18726,#18753,#18780,#18787,#18814,#18841, + #18868,#18895,#18922,#18949,#18976,#18983,#19010,#19037,#19064, + #19091,#19118,#19145,#19172,#19179,#19206,#19233,#19260,#19287, + #19314,#19341,#19368,#19375,#19402,#19429,#19456,#19483,#19510, + #19537,#19564)); +#2287 = ADVANCED_FACE('',(#2288),#2302,.F.); +#2288 = FACE_BOUND('',#2289,.F.); +#2289 = EDGE_LOOP('',(#2290,#2325,#2358,#2386)); +#2290 = ORIENTED_EDGE('',*,*,#2291,.T.); +#2291 = EDGE_CURVE('',#2292,#2294,#2296,.T.); +#2292 = VERTEX_POINT('',#2293); +#2293 = CARTESIAN_POINT('',(2.25,4.015,0.825)); +#2294 = VERTEX_POINT('',#2295); +#2295 = CARTESIAN_POINT('',(2.25,3.605,0.825)); +#2296 = SURFACE_CURVE('',#2297,(#2301,#2313),.PCURVE_S1.); +#2297 = LINE('',#2298,#2299); +#2298 = CARTESIAN_POINT('',(2.25,4.015,0.825)); +#2299 = VECTOR('',#2300,1.); +#2300 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#2301 = PCURVE('',#2302,#2307); +#2302 = CYLINDRICAL_SURFACE('',#2303,0.1); +#2303 = AXIS2_PLACEMENT_3D('',#2304,#2305,#2306); +#2304 = CARTESIAN_POINT('',(2.25,4.015,0.725)); +#2305 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#2306 = DIRECTION('',(4.440892098501E-15,9.860761315262E-31,1.)); +#2307 = DEFINITIONAL_REPRESENTATION('',(#2308),#2312); +#2308 = LINE('',#2309,#2310); +#2309 = CARTESIAN_POINT('',(0.,0.)); +#2310 = VECTOR('',#2311,1.); +#2311 = DIRECTION('',(0.,-1.)); +#2312 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2313 = PCURVE('',#2314,#2319); +#2314 = PLANE('',#2315); +#2315 = AXIS2_PLACEMENT_3D('',#2316,#2317,#2318); +#2316 = CARTESIAN_POINT('',(1.8,4.015,0.825)); +#2317 = DIRECTION('',(0.,0.,1.)); +#2318 = DIRECTION('',(1.,2.22044604925E-16,-0.)); +#2319 = DEFINITIONAL_REPRESENTATION('',(#2320),#2324); +#2320 = LINE('',#2321,#2322); +#2321 = CARTESIAN_POINT('',(0.45,-9.992007221625E-17)); +#2322 = VECTOR('',#2323,1.); +#2323 = DIRECTION('',(0.,-1.)); +#2324 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2325 = ORIENTED_EDGE('',*,*,#2326,.T.); +#2326 = EDGE_CURVE('',#2294,#2327,#2329,.T.); +#2327 = VERTEX_POINT('',#2328); +#2328 = CARTESIAN_POINT('',(2.35,3.605,0.725)); +#2329 = SURFACE_CURVE('',#2330,(#2335,#2342),.PCURVE_S1.); +#2330 = CIRCLE('',#2331,0.1); +#2331 = AXIS2_PLACEMENT_3D('',#2332,#2333,#2334); +#2332 = CARTESIAN_POINT('',(2.25,3.605,0.725)); +#2333 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#2334 = DIRECTION('',(4.440892098501E-15,9.860761315262E-31,1.)); +#2335 = PCURVE('',#2302,#2336); +#2336 = DEFINITIONAL_REPRESENTATION('',(#2337),#2341); +#2337 = LINE('',#2338,#2339); +#2338 = CARTESIAN_POINT('',(0.,-0.41)); +#2339 = VECTOR('',#2340,1.); +#2340 = DIRECTION('',(1.,0.)); +#2341 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2342 = PCURVE('',#2343,#2348); +#2343 = PLANE('',#2344); +#2344 = AXIS2_PLACEMENT_3D('',#2345,#2346,#2347); +#2345 = CARTESIAN_POINT('',(2.41578967201,3.605,0.532659657565)); +#2346 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#2347 = DIRECTION('',(0.,0.,1.)); +#2348 = DEFINITIONAL_REPRESENTATION('',(#2349),#2357); +#2349 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2350,#2351,#2352,#2353, +#2354,#2355,#2356),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#2350 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#2351 = CARTESIAN_POINT('',(0.292340342435,-7.415408746888E-03)); +#2352 = CARTESIAN_POINT('',(0.142340342435,7.918713163156E-02)); +#2353 = CARTESIAN_POINT('',(-7.659657565E-03,0.16578967201)); +#2354 = CARTESIAN_POINT('',(0.142340342435,0.252392212388)); +#2355 = CARTESIAN_POINT('',(0.292340342435,0.338994752767)); +#2356 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#2357 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2358 = ORIENTED_EDGE('',*,*,#2359,.F.); +#2359 = EDGE_CURVE('',#2360,#2327,#2362,.T.); +#2360 = VERTEX_POINT('',#2361); +#2361 = CARTESIAN_POINT('',(2.35,4.015,0.725)); +#2362 = SURFACE_CURVE('',#2363,(#2367,#2374),.PCURVE_S1.); +#2363 = LINE('',#2364,#2365); +#2364 = CARTESIAN_POINT('',(2.35,4.015,0.725)); +#2365 = VECTOR('',#2366,1.); +#2366 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#2367 = PCURVE('',#2302,#2368); +#2368 = DEFINITIONAL_REPRESENTATION('',(#2369),#2373); +#2369 = LINE('',#2370,#2371); +#2370 = CARTESIAN_POINT('',(1.570796326795,0.)); +#2371 = VECTOR('',#2372,1.); +#2372 = DIRECTION('',(0.,-1.)); +#2373 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2374 = PCURVE('',#2375,#2380); +#2375 = PLANE('',#2376); +#2376 = AXIS2_PLACEMENT_3D('',#2377,#2378,#2379); +#2377 = CARTESIAN_POINT('',(2.35,4.015,0.725)); +#2378 = DIRECTION('',(1.,2.22044604925E-16,1.044915787883E-15)); +#2379 = DIRECTION('',(1.044915787883E-15,2.320179133003E-31,-1.)); +#2380 = DEFINITIONAL_REPRESENTATION('',(#2381),#2385); +#2381 = LINE('',#2382,#2383); +#2382 = CARTESIAN_POINT('',(0.,0.)); +#2383 = VECTOR('',#2384,1.); +#2384 = DIRECTION('',(7.584527938158E-44,-1.)); +#2385 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2386 = ORIENTED_EDGE('',*,*,#2387,.F.); +#2387 = EDGE_CURVE('',#2292,#2360,#2388,.T.); +#2388 = SURFACE_CURVE('',#2389,(#2394,#2401),.PCURVE_S1.); +#2389 = CIRCLE('',#2390,0.1); +#2390 = AXIS2_PLACEMENT_3D('',#2391,#2392,#2393); +#2391 = CARTESIAN_POINT('',(2.25,4.015,0.725)); +#2392 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#2393 = DIRECTION('',(4.440892098501E-15,9.860761315262E-31,1.)); +#2394 = PCURVE('',#2302,#2395); +#2395 = DEFINITIONAL_REPRESENTATION('',(#2396),#2400); +#2396 = LINE('',#2397,#2398); +#2397 = CARTESIAN_POINT('',(0.,0.)); +#2398 = VECTOR('',#2399,1.); +#2399 = DIRECTION('',(1.,0.)); +#2400 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2401 = PCURVE('',#2402,#2407); +#2402 = PLANE('',#2403); +#2403 = AXIS2_PLACEMENT_3D('',#2404,#2405,#2406); +#2404 = CARTESIAN_POINT('',(2.41578967201,4.015,0.532659657565)); +#2405 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#2406 = DIRECTION('',(0.,0.,1.)); +#2407 = DEFINITIONAL_REPRESENTATION('',(#2408),#2416); +#2408 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2409,#2410,#2411,#2412, +#2413,#2414,#2415),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#2409 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#2410 = CARTESIAN_POINT('',(0.292340342435,-7.415408746888E-03)); +#2411 = CARTESIAN_POINT('',(0.142340342435,7.918713163156E-02)); +#2412 = CARTESIAN_POINT('',(-7.659657565E-03,0.16578967201)); +#2413 = CARTESIAN_POINT('',(0.142340342435,0.252392212388)); +#2414 = CARTESIAN_POINT('',(0.292340342435,0.338994752767)); +#2415 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#2416 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2417 = ADVANCED_FACE('',(#2418),#2314,.F.); +#2418 = FACE_BOUND('',#2419,.F.); +#2419 = EDGE_LOOP('',(#2420,#2443,#2471,#2492)); +#2420 = ORIENTED_EDGE('',*,*,#2421,.F.); +#2421 = EDGE_CURVE('',#2422,#2292,#2424,.T.); +#2422 = VERTEX_POINT('',#2423); +#2423 = CARTESIAN_POINT('',(1.95,4.015,0.825)); +#2424 = SURFACE_CURVE('',#2425,(#2429,#2436),.PCURVE_S1.); +#2425 = LINE('',#2426,#2427); +#2426 = CARTESIAN_POINT('',(1.8,4.015,0.825)); +#2427 = VECTOR('',#2428,1.); +#2428 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#2429 = PCURVE('',#2314,#2430); +#2430 = DEFINITIONAL_REPRESENTATION('',(#2431),#2435); +#2431 = LINE('',#2432,#2433); +#2432 = CARTESIAN_POINT('',(0.,0.)); +#2433 = VECTOR('',#2434,1.); +#2434 = DIRECTION('',(1.,0.)); +#2435 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2436 = PCURVE('',#2402,#2437); +#2437 = DEFINITIONAL_REPRESENTATION('',(#2438),#2442); +#2438 = LINE('',#2439,#2440); +#2439 = CARTESIAN_POINT('',(0.292340342435,0.61578967201)); +#2440 = VECTOR('',#2441,1.); +#2441 = DIRECTION('',(0.,-1.)); +#2442 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2443 = ORIENTED_EDGE('',*,*,#2444,.T.); +#2444 = EDGE_CURVE('',#2422,#2445,#2447,.T.); +#2445 = VERTEX_POINT('',#2446); +#2446 = CARTESIAN_POINT('',(1.95,3.605,0.825)); +#2447 = SURFACE_CURVE('',#2448,(#2452,#2459),.PCURVE_S1.); +#2448 = LINE('',#2449,#2450); +#2449 = CARTESIAN_POINT('',(1.95,4.175,0.825)); +#2450 = VECTOR('',#2451,1.); +#2451 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#2452 = PCURVE('',#2314,#2453); +#2453 = DEFINITIONAL_REPRESENTATION('',(#2454),#2458); +#2454 = LINE('',#2455,#2456); +#2455 = CARTESIAN_POINT('',(0.15,0.16)); +#2456 = VECTOR('',#2457,1.); +#2457 = DIRECTION('',(0.,-1.)); +#2458 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2459 = PCURVE('',#2460,#2465); +#2460 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#2461,#2462) + ,(#2463,#2464 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,8.35),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#2461 = CARTESIAN_POINT('',(1.835171280765,4.117585640382,0.1)); +#2462 = CARTESIAN_POINT('',(1.95,4.175,0.825)); +#2463 = CARTESIAN_POINT('',(1.835171280765,-4.117585640382,0.1)); +#2464 = CARTESIAN_POINT('',(1.95,-4.175,0.825)); +#2465 = DEFINITIONAL_REPRESENTATION('',(#2466),#2470); +#2466 = LINE('',#2467,#2468); +#2467 = CARTESIAN_POINT('',(2.22044604925E-16,1.)); +#2468 = VECTOR('',#2469,1.); +#2469 = DIRECTION('',(1.,2.707861035671E-16)); +#2470 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2471 = ORIENTED_EDGE('',*,*,#2472,.T.); +#2472 = EDGE_CURVE('',#2445,#2294,#2473,.T.); +#2473 = SURFACE_CURVE('',#2474,(#2478,#2485),.PCURVE_S1.); +#2474 = LINE('',#2475,#2476); +#2475 = CARTESIAN_POINT('',(1.8,3.605,0.825)); +#2476 = VECTOR('',#2477,1.); +#2477 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#2478 = PCURVE('',#2314,#2479); +#2479 = DEFINITIONAL_REPRESENTATION('',(#2480),#2484); +#2480 = LINE('',#2481,#2482); +#2481 = CARTESIAN_POINT('',(-9.103828801925E-17,-0.41)); +#2482 = VECTOR('',#2483,1.); +#2483 = DIRECTION('',(1.,0.)); +#2484 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2485 = PCURVE('',#2343,#2486); +#2486 = DEFINITIONAL_REPRESENTATION('',(#2487),#2491); +#2487 = LINE('',#2488,#2489); +#2488 = CARTESIAN_POINT('',(0.292340342435,0.61578967201)); +#2489 = VECTOR('',#2490,1.); +#2490 = DIRECTION('',(0.,-1.)); +#2491 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2492 = ORIENTED_EDGE('',*,*,#2291,.F.); +#2493 = ADVANCED_FACE('',(#2494),#2375,.F.); +#2494 = FACE_BOUND('',#2495,.F.); +#2495 = EDGE_LOOP('',(#2496,#2497,#2520,#2548)); +#2496 = ORIENTED_EDGE('',*,*,#2359,.T.); +#2497 = ORIENTED_EDGE('',*,*,#2498,.T.); +#2498 = EDGE_CURVE('',#2327,#2499,#2501,.T.); +#2499 = VERTEX_POINT('',#2500); +#2500 = CARTESIAN_POINT('',(2.35,3.605,0.3)); +#2501 = SURFACE_CURVE('',#2502,(#2506,#2513),.PCURVE_S1.); +#2502 = LINE('',#2503,#2504); +#2503 = CARTESIAN_POINT('',(2.35,3.605,0.725)); +#2504 = VECTOR('',#2505,1.); +#2505 = DIRECTION('',(1.044915787883E-15,2.320179133003E-31,-1.)); +#2506 = PCURVE('',#2375,#2507); +#2507 = DEFINITIONAL_REPRESENTATION('',(#2508),#2512); +#2508 = LINE('',#2509,#2510); +#2509 = CARTESIAN_POINT('',(-9.512734445312E-32,-0.41)); +#2510 = VECTOR('',#2511,1.); +#2511 = DIRECTION('',(1.,0.)); +#2512 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2513 = PCURVE('',#2343,#2514); +#2514 = DEFINITIONAL_REPRESENTATION('',(#2515),#2519); +#2515 = LINE('',#2516,#2517); +#2516 = CARTESIAN_POINT('',(0.192340342435,6.578967201E-02)); +#2517 = VECTOR('',#2518,1.); +#2518 = DIRECTION('',(-1.,-1.044915787883E-15)); +#2519 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2520 = ORIENTED_EDGE('',*,*,#2521,.F.); +#2521 = EDGE_CURVE('',#2522,#2499,#2524,.T.); +#2522 = VERTEX_POINT('',#2523); +#2523 = CARTESIAN_POINT('',(2.35,4.015,0.3)); +#2524 = SURFACE_CURVE('',#2525,(#2529,#2536),.PCURVE_S1.); +#2525 = LINE('',#2526,#2527); +#2526 = CARTESIAN_POINT('',(2.35,4.015,0.3)); +#2527 = VECTOR('',#2528,1.); +#2528 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#2529 = PCURVE('',#2375,#2530); +#2530 = DEFINITIONAL_REPRESENTATION('',(#2531),#2535); +#2531 = LINE('',#2532,#2533); +#2532 = CARTESIAN_POINT('',(0.425,-9.860761315258E-32)); +#2533 = VECTOR('',#2534,1.); +#2534 = DIRECTION('',(7.584527938158E-44,-1.)); +#2535 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2536 = PCURVE('',#2537,#2542); +#2537 = CYLINDRICAL_SURFACE('',#2538,0.3); +#2538 = AXIS2_PLACEMENT_3D('',#2539,#2540,#2541); +#2539 = CARTESIAN_POINT('',(2.65,4.015,0.3)); +#2540 = DIRECTION('',(-2.22044604925E-16,1.,-0.)); +#2541 = DIRECTION('',(-1.,-2.22044604925E-16,3.515706244646E-15)); +#2542 = DEFINITIONAL_REPRESENTATION('',(#2543),#2547); +#2543 = LINE('',#2544,#2545); +#2544 = CARTESIAN_POINT('',(6.28318530718,0.)); +#2545 = VECTOR('',#2546,1.); +#2546 = DIRECTION('',(0.,-1.)); +#2547 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2548 = ORIENTED_EDGE('',*,*,#2549,.F.); +#2549 = EDGE_CURVE('',#2360,#2522,#2550,.T.); +#2550 = SURFACE_CURVE('',#2551,(#2555,#2562),.PCURVE_S1.); +#2551 = LINE('',#2552,#2553); +#2552 = CARTESIAN_POINT('',(2.35,4.015,0.725)); +#2553 = VECTOR('',#2554,1.); +#2554 = DIRECTION('',(1.044915787883E-15,2.320179133003E-31,-1.)); +#2555 = PCURVE('',#2375,#2556); +#2556 = DEFINITIONAL_REPRESENTATION('',(#2557),#2561); +#2557 = LINE('',#2558,#2559); +#2558 = CARTESIAN_POINT('',(0.,0.)); +#2559 = VECTOR('',#2560,1.); +#2560 = DIRECTION('',(1.,0.)); +#2561 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2562 = PCURVE('',#2402,#2563); +#2563 = DEFINITIONAL_REPRESENTATION('',(#2564),#2568); +#2564 = LINE('',#2565,#2566); +#2565 = CARTESIAN_POINT('',(0.192340342435,6.578967201E-02)); +#2566 = VECTOR('',#2567,1.); +#2567 = DIRECTION('',(-1.,-1.044915787883E-15)); +#2568 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2569 = ADVANCED_FACE('',(#2570),#2402,.F.); +#2570 = FACE_BOUND('',#2571,.F.); +#2571 = EDGE_LOOP('',(#2572,#2600,#2601,#2602,#2603,#2627,#2655,#2683, + #2711,#2744,#2772,#2801)); +#2572 = ORIENTED_EDGE('',*,*,#2573,.F.); +#2573 = EDGE_CURVE('',#2422,#2574,#2576,.T.); +#2574 = VERTEX_POINT('',#2575); +#2575 = CARTESIAN_POINT('',(1.95,4.015,1.025)); +#2576 = SURFACE_CURVE('',#2577,(#2581,#2588),.PCURVE_S1.); +#2577 = LINE('',#2578,#2579); +#2578 = CARTESIAN_POINT('',(1.95,4.015,0.778829828783)); +#2579 = VECTOR('',#2580,1.); +#2580 = DIRECTION('',(0.,0.,1.)); +#2581 = PCURVE('',#2402,#2582); +#2582 = DEFINITIONAL_REPRESENTATION('',(#2583),#2587); +#2583 = LINE('',#2584,#2585); +#2584 = CARTESIAN_POINT('',(0.246170171218,0.46578967201)); +#2585 = VECTOR('',#2586,1.); +#2586 = DIRECTION('',(1.,0.)); +#2587 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2588 = PCURVE('',#2589,#2594); +#2589 = PLANE('',#2590); +#2590 = AXIS2_PLACEMENT_3D('',#2591,#2592,#2593); +#2591 = CARTESIAN_POINT('',(1.95,4.175,1.025)); +#2592 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#2593 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#2594 = DEFINITIONAL_REPRESENTATION('',(#2595),#2599); +#2595 = LINE('',#2596,#2597); +#2596 = CARTESIAN_POINT('',(0.16,-0.246170171217)); +#2597 = VECTOR('',#2598,1.); +#2598 = DIRECTION('',(0.,1.)); +#2599 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2600 = ORIENTED_EDGE('',*,*,#2421,.T.); +#2601 = ORIENTED_EDGE('',*,*,#2387,.T.); +#2602 = ORIENTED_EDGE('',*,*,#2549,.T.); +#2603 = ORIENTED_EDGE('',*,*,#2604,.T.); +#2604 = EDGE_CURVE('',#2522,#2605,#2607,.T.); +#2605 = VERTEX_POINT('',#2606); +#2606 = CARTESIAN_POINT('',(2.65,4.015,5.551115123126E-17)); +#2607 = SURFACE_CURVE('',#2608,(#2613,#2620),.PCURVE_S1.); +#2608 = CIRCLE('',#2609,0.3); +#2609 = AXIS2_PLACEMENT_3D('',#2610,#2611,#2612); +#2610 = CARTESIAN_POINT('',(2.65,4.015,0.3)); +#2611 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#2612 = DIRECTION('',(-1.,-2.22044604925E-16,3.515706244646E-15)); +#2613 = PCURVE('',#2402,#2614); +#2614 = DEFINITIONAL_REPRESENTATION('',(#2615),#2619); +#2615 = CIRCLE('',#2616,0.3); +#2616 = AXIS2_PLACEMENT_2D('',#2617,#2618); +#2617 = CARTESIAN_POINT('',(-0.232659657565,-0.23421032799)); +#2618 = DIRECTION('',(3.515706244646E-15,1.)); +#2619 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2620 = PCURVE('',#2537,#2621); +#2621 = DEFINITIONAL_REPRESENTATION('',(#2622),#2626); +#2622 = LINE('',#2623,#2624); +#2623 = CARTESIAN_POINT('',(6.28318530718,0.)); +#2624 = VECTOR('',#2625,1.); +#2625 = DIRECTION('',(-1.,0.)); +#2626 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2627 = ORIENTED_EDGE('',*,*,#2628,.T.); +#2628 = EDGE_CURVE('',#2605,#2629,#2631,.T.); +#2629 = VERTEX_POINT('',#2630); +#2630 = CARTESIAN_POINT('',(3.,4.015,5.551115123126E-17)); +#2631 = SURFACE_CURVE('',#2632,(#2636,#2643),.PCURVE_S1.); +#2632 = LINE('',#2633,#2634); +#2633 = CARTESIAN_POINT('',(2.65,4.015,5.551115123126E-17)); +#2634 = VECTOR('',#2635,1.); +#2635 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#2636 = PCURVE('',#2402,#2637); +#2637 = DEFINITIONAL_REPRESENTATION('',(#2638),#2642); +#2638 = LINE('',#2639,#2640); +#2639 = CARTESIAN_POINT('',(-0.532659657565,-0.23421032799)); +#2640 = VECTOR('',#2641,1.); +#2641 = DIRECTION('',(0.,-1.)); +#2642 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2643 = PCURVE('',#2644,#2649); +#2644 = PLANE('',#2645); +#2645 = AXIS2_PLACEMENT_3D('',#2646,#2647,#2648); +#2646 = CARTESIAN_POINT('',(2.65,4.015,5.551115123126E-17)); +#2647 = DIRECTION('',(0.,0.,1.)); +#2648 = DIRECTION('',(1.,2.22044604925E-16,-0.)); +#2649 = DEFINITIONAL_REPRESENTATION('',(#2650),#2654); +#2650 = LINE('',#2651,#2652); +#2651 = CARTESIAN_POINT('',(0.,0.)); +#2652 = VECTOR('',#2653,1.); +#2653 = DIRECTION('',(1.,0.)); +#2654 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2655 = ORIENTED_EDGE('',*,*,#2656,.T.); +#2656 = EDGE_CURVE('',#2629,#2657,#2659,.T.); +#2657 = VERTEX_POINT('',#2658); +#2658 = CARTESIAN_POINT('',(3.,4.015,0.2)); +#2659 = SURFACE_CURVE('',#2660,(#2664,#2671),.PCURVE_S1.); +#2660 = LINE('',#2661,#2662); +#2661 = CARTESIAN_POINT('',(3.,4.015,5.551115123126E-17)); +#2662 = VECTOR('',#2663,1.); +#2663 = DIRECTION('',(0.,0.,1.)); +#2664 = PCURVE('',#2402,#2665); +#2665 = DEFINITIONAL_REPRESENTATION('',(#2666),#2670); +#2666 = LINE('',#2667,#2668); +#2667 = CARTESIAN_POINT('',(-0.532659657565,-0.58421032799)); +#2668 = VECTOR('',#2669,1.); +#2669 = DIRECTION('',(1.,0.)); +#2670 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2671 = PCURVE('',#2672,#2677); +#2672 = PLANE('',#2673); +#2673 = AXIS2_PLACEMENT_3D('',#2674,#2675,#2676); +#2674 = CARTESIAN_POINT('',(3.,4.015,5.551115123126E-17)); +#2675 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#2676 = DIRECTION('',(0.,0.,1.)); +#2677 = DEFINITIONAL_REPRESENTATION('',(#2678),#2682); +#2678 = LINE('',#2679,#2680); +#2679 = CARTESIAN_POINT('',(0.,0.)); +#2680 = VECTOR('',#2681,1.); +#2681 = DIRECTION('',(1.,0.)); +#2682 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2683 = ORIENTED_EDGE('',*,*,#2684,.T.); +#2684 = EDGE_CURVE('',#2657,#2685,#2687,.T.); +#2685 = VERTEX_POINT('',#2686); +#2686 = CARTESIAN_POINT('',(2.65,4.015,0.2)); +#2687 = SURFACE_CURVE('',#2688,(#2692,#2699),.PCURVE_S1.); +#2688 = LINE('',#2689,#2690); +#2689 = CARTESIAN_POINT('',(3.,4.015,0.2)); +#2690 = VECTOR('',#2691,1.); +#2691 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#2692 = PCURVE('',#2402,#2693); +#2693 = DEFINITIONAL_REPRESENTATION('',(#2694),#2698); +#2694 = LINE('',#2695,#2696); +#2695 = CARTESIAN_POINT('',(-0.332659657565,-0.58421032799)); +#2696 = VECTOR('',#2697,1.); +#2697 = DIRECTION('',(0.,1.)); +#2698 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2699 = PCURVE('',#2700,#2705); +#2700 = PLANE('',#2701); +#2701 = AXIS2_PLACEMENT_3D('',#2702,#2703,#2704); +#2702 = CARTESIAN_POINT('',(3.,4.015,0.2)); +#2703 = DIRECTION('',(0.,0.,-1.)); +#2704 = DIRECTION('',(-1.,-2.22044604925E-16,-0.)); +#2705 = DEFINITIONAL_REPRESENTATION('',(#2706),#2710); +#2706 = LINE('',#2707,#2708); +#2707 = CARTESIAN_POINT('',(-0.,0.)); +#2708 = VECTOR('',#2709,1.); +#2709 = DIRECTION('',(1.,0.)); +#2710 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2711 = ORIENTED_EDGE('',*,*,#2712,.T.); +#2712 = EDGE_CURVE('',#2685,#2713,#2715,.T.); +#2713 = VERTEX_POINT('',#2714); +#2714 = CARTESIAN_POINT('',(2.55,4.015,0.3)); +#2715 = SURFACE_CURVE('',#2716,(#2721,#2732),.PCURVE_S1.); +#2716 = CIRCLE('',#2717,0.1); +#2717 = AXIS2_PLACEMENT_3D('',#2718,#2719,#2720); +#2718 = CARTESIAN_POINT('',(2.65,4.015,0.3)); +#2719 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#2720 = DIRECTION('',(0.,0.,-1.)); +#2721 = PCURVE('',#2402,#2722); +#2722 = DEFINITIONAL_REPRESENTATION('',(#2723),#2731); +#2723 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2724,#2725,#2726,#2727, +#2728,#2729,#2730),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#2724 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#2725 = CARTESIAN_POINT('',(-0.332659657565,-6.100524723311E-02)); +#2726 = CARTESIAN_POINT('',(-0.182659657565,-0.147607787612)); +#2727 = CARTESIAN_POINT('',(-3.2659657565E-02,-0.23421032799)); +#2728 = CARTESIAN_POINT('',(-0.182659657565,-0.320812868368)); +#2729 = CARTESIAN_POINT('',(-0.332659657565,-0.407415408747)); +#2730 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#2731 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2732 = PCURVE('',#2733,#2738); +#2733 = CYLINDRICAL_SURFACE('',#2734,0.1); +#2734 = AXIS2_PLACEMENT_3D('',#2735,#2736,#2737); +#2735 = CARTESIAN_POINT('',(2.65,4.015,0.3)); +#2736 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#2737 = DIRECTION('',(0.,0.,-1.)); +#2738 = DEFINITIONAL_REPRESENTATION('',(#2739),#2743); +#2739 = LINE('',#2740,#2741); +#2740 = CARTESIAN_POINT('',(0.,0.)); +#2741 = VECTOR('',#2742,1.); +#2742 = DIRECTION('',(1.,0.)); +#2743 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2744 = ORIENTED_EDGE('',*,*,#2745,.T.); +#2745 = EDGE_CURVE('',#2713,#2746,#2748,.T.); +#2746 = VERTEX_POINT('',#2747); +#2747 = CARTESIAN_POINT('',(2.55,4.015,0.725)); +#2748 = SURFACE_CURVE('',#2749,(#2753,#2760),.PCURVE_S1.); +#2749 = LINE('',#2750,#2751); +#2750 = CARTESIAN_POINT('',(2.55,4.015,0.3)); +#2751 = VECTOR('',#2752,1.); +#2752 = DIRECTION('',(0.,0.,1.)); +#2753 = PCURVE('',#2402,#2754); +#2754 = DEFINITIONAL_REPRESENTATION('',(#2755),#2759); +#2755 = LINE('',#2756,#2757); +#2756 = CARTESIAN_POINT('',(-0.232659657565,-0.13421032799)); +#2757 = VECTOR('',#2758,1.); +#2758 = DIRECTION('',(1.,0.)); +#2759 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2760 = PCURVE('',#2761,#2766); +#2761 = PLANE('',#2762); +#2762 = AXIS2_PLACEMENT_3D('',#2763,#2764,#2765); +#2763 = CARTESIAN_POINT('',(2.55,4.015,0.3)); +#2764 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#2765 = DIRECTION('',(0.,0.,1.)); +#2766 = DEFINITIONAL_REPRESENTATION('',(#2767),#2771); +#2767 = LINE('',#2768,#2769); +#2768 = CARTESIAN_POINT('',(0.,0.)); +#2769 = VECTOR('',#2770,1.); +#2770 = DIRECTION('',(1.,0.)); +#2771 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2772 = ORIENTED_EDGE('',*,*,#2773,.T.); +#2773 = EDGE_CURVE('',#2746,#2774,#2776,.T.); +#2774 = VERTEX_POINT('',#2775); +#2775 = CARTESIAN_POINT('',(2.25,4.015,1.025)); +#2776 = SURFACE_CURVE('',#2777,(#2782,#2789),.PCURVE_S1.); +#2777 = CIRCLE('',#2778,0.3); +#2778 = AXIS2_PLACEMENT_3D('',#2779,#2780,#2781); +#2779 = CARTESIAN_POINT('',(2.25,4.015,0.725)); +#2780 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#2781 = DIRECTION('',(1.,2.22044604925E-16,3.700743415417E-16)); +#2782 = PCURVE('',#2402,#2783); +#2783 = DEFINITIONAL_REPRESENTATION('',(#2784),#2788); +#2784 = CIRCLE('',#2785,0.3); +#2785 = AXIS2_PLACEMENT_2D('',#2786,#2787); +#2786 = CARTESIAN_POINT('',(0.192340342435,0.16578967201)); +#2787 = DIRECTION('',(3.700743415417E-16,-1.)); +#2788 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2789 = PCURVE('',#2790,#2795); +#2790 = CYLINDRICAL_SURFACE('',#2791,0.3); +#2791 = AXIS2_PLACEMENT_3D('',#2792,#2793,#2794); +#2792 = CARTESIAN_POINT('',(2.25,4.015,0.725)); +#2793 = DIRECTION('',(-2.22044604925E-16,1.,-0.)); +#2794 = DIRECTION('',(1.,2.22044604925E-16,3.700743415417E-16)); +#2795 = DEFINITIONAL_REPRESENTATION('',(#2796),#2800); +#2796 = LINE('',#2797,#2798); +#2797 = CARTESIAN_POINT('',(6.28318530718,0.)); +#2798 = VECTOR('',#2799,1.); +#2799 = DIRECTION('',(-1.,0.)); +#2800 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2801 = ORIENTED_EDGE('',*,*,#2802,.T.); +#2802 = EDGE_CURVE('',#2774,#2574,#2803,.T.); +#2803 = SURFACE_CURVE('',#2804,(#2808,#2815),.PCURVE_S1.); +#2804 = LINE('',#2805,#2806); +#2805 = CARTESIAN_POINT('',(2.25,4.015,1.025)); +#2806 = VECTOR('',#2807,1.); +#2807 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#2808 = PCURVE('',#2402,#2809); +#2809 = DEFINITIONAL_REPRESENTATION('',(#2810),#2814); +#2810 = LINE('',#2811,#2812); +#2811 = CARTESIAN_POINT('',(0.492340342435,0.16578967201)); +#2812 = VECTOR('',#2813,1.); +#2813 = DIRECTION('',(0.,1.)); +#2814 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2815 = PCURVE('',#2816,#2821); +#2816 = PLANE('',#2817); +#2817 = AXIS2_PLACEMENT_3D('',#2818,#2819,#2820); +#2818 = CARTESIAN_POINT('',(2.25,4.015,1.025)); +#2819 = DIRECTION('',(0.,0.,-1.)); +#2820 = DIRECTION('',(-1.,-2.22044604925E-16,-0.)); +#2821 = DEFINITIONAL_REPRESENTATION('',(#2822),#2826); +#2822 = LINE('',#2823,#2824); +#2823 = CARTESIAN_POINT('',(-0.,0.)); +#2824 = VECTOR('',#2825,1.); +#2825 = DIRECTION('',(1.,0.)); +#2826 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2827 = ADVANCED_FACE('',(#2828),#2343,.T.); +#2828 = FACE_BOUND('',#2829,.T.); +#2829 = EDGE_LOOP('',(#2830,#2858,#2859,#2860,#2861,#2885,#2908,#2931, + #2954,#2982,#3005,#3029)); +#2830 = ORIENTED_EDGE('',*,*,#2831,.F.); +#2831 = EDGE_CURVE('',#2445,#2832,#2834,.T.); +#2832 = VERTEX_POINT('',#2833); +#2833 = CARTESIAN_POINT('',(1.95,3.605,1.025)); +#2834 = SURFACE_CURVE('',#2835,(#2839,#2846),.PCURVE_S1.); +#2835 = LINE('',#2836,#2837); +#2836 = CARTESIAN_POINT('',(1.95,3.605,0.778829828783)); +#2837 = VECTOR('',#2838,1.); +#2838 = DIRECTION('',(0.,0.,1.)); +#2839 = PCURVE('',#2343,#2840); +#2840 = DEFINITIONAL_REPRESENTATION('',(#2841),#2845); +#2841 = LINE('',#2842,#2843); +#2842 = CARTESIAN_POINT('',(0.246170171218,0.46578967201)); +#2843 = VECTOR('',#2844,1.); +#2844 = DIRECTION('',(1.,0.)); +#2845 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2846 = PCURVE('',#2847,#2852); +#2847 = PLANE('',#2848); +#2848 = AXIS2_PLACEMENT_3D('',#2849,#2850,#2851); +#2849 = CARTESIAN_POINT('',(1.95,4.175,1.025)); +#2850 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#2851 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#2852 = DEFINITIONAL_REPRESENTATION('',(#2853),#2857); +#2853 = LINE('',#2854,#2855); +#2854 = CARTESIAN_POINT('',(0.57,-0.246170171217)); +#2855 = VECTOR('',#2856,1.); +#2856 = DIRECTION('',(0.,1.)); +#2857 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2858 = ORIENTED_EDGE('',*,*,#2472,.T.); +#2859 = ORIENTED_EDGE('',*,*,#2326,.T.); +#2860 = ORIENTED_EDGE('',*,*,#2498,.T.); +#2861 = ORIENTED_EDGE('',*,*,#2862,.T.); +#2862 = EDGE_CURVE('',#2499,#2863,#2865,.T.); +#2863 = VERTEX_POINT('',#2864); +#2864 = CARTESIAN_POINT('',(2.65,3.605,5.551115123126E-17)); +#2865 = SURFACE_CURVE('',#2866,(#2871,#2878),.PCURVE_S1.); +#2866 = CIRCLE('',#2867,0.3); +#2867 = AXIS2_PLACEMENT_3D('',#2868,#2869,#2870); +#2868 = CARTESIAN_POINT('',(2.65,3.605,0.3)); +#2869 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#2870 = DIRECTION('',(-1.,-2.22044604925E-16,3.515706244646E-15)); +#2871 = PCURVE('',#2343,#2872); +#2872 = DEFINITIONAL_REPRESENTATION('',(#2873),#2877); +#2873 = CIRCLE('',#2874,0.3); +#2874 = AXIS2_PLACEMENT_2D('',#2875,#2876); +#2875 = CARTESIAN_POINT('',(-0.232659657565,-0.23421032799)); +#2876 = DIRECTION('',(3.515706244646E-15,1.)); +#2877 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2878 = PCURVE('',#2537,#2879); +#2879 = DEFINITIONAL_REPRESENTATION('',(#2880),#2884); +#2880 = LINE('',#2881,#2882); +#2881 = CARTESIAN_POINT('',(6.28318530718,-0.41)); +#2882 = VECTOR('',#2883,1.); +#2883 = DIRECTION('',(-1.,0.)); +#2884 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2885 = ORIENTED_EDGE('',*,*,#2886,.T.); +#2886 = EDGE_CURVE('',#2863,#2887,#2889,.T.); +#2887 = VERTEX_POINT('',#2888); +#2888 = CARTESIAN_POINT('',(3.,3.605,5.551115123126E-17)); +#2889 = SURFACE_CURVE('',#2890,(#2894,#2901),.PCURVE_S1.); +#2890 = LINE('',#2891,#2892); +#2891 = CARTESIAN_POINT('',(2.65,3.605,5.551115123126E-17)); +#2892 = VECTOR('',#2893,1.); +#2893 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#2894 = PCURVE('',#2343,#2895); +#2895 = DEFINITIONAL_REPRESENTATION('',(#2896),#2900); +#2896 = LINE('',#2897,#2898); +#2897 = CARTESIAN_POINT('',(-0.532659657565,-0.23421032799)); +#2898 = VECTOR('',#2899,1.); +#2899 = DIRECTION('',(0.,-1.)); +#2900 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2901 = PCURVE('',#2644,#2902); +#2902 = DEFINITIONAL_REPRESENTATION('',(#2903),#2907); +#2903 = LINE('',#2904,#2905); +#2904 = CARTESIAN_POINT('',(-9.103828801925E-17,-0.41)); +#2905 = VECTOR('',#2906,1.); +#2906 = DIRECTION('',(1.,0.)); +#2907 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2908 = ORIENTED_EDGE('',*,*,#2909,.T.); +#2909 = EDGE_CURVE('',#2887,#2910,#2912,.T.); +#2910 = VERTEX_POINT('',#2911); +#2911 = CARTESIAN_POINT('',(3.,3.605,0.2)); +#2912 = SURFACE_CURVE('',#2913,(#2917,#2924),.PCURVE_S1.); +#2913 = LINE('',#2914,#2915); +#2914 = CARTESIAN_POINT('',(3.,3.605,5.551115123126E-17)); +#2915 = VECTOR('',#2916,1.); +#2916 = DIRECTION('',(0.,0.,1.)); +#2917 = PCURVE('',#2343,#2918); +#2918 = DEFINITIONAL_REPRESENTATION('',(#2919),#2923); +#2919 = LINE('',#2920,#2921); +#2920 = CARTESIAN_POINT('',(-0.532659657565,-0.58421032799)); +#2921 = VECTOR('',#2922,1.); +#2922 = DIRECTION('',(1.,0.)); +#2923 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2924 = PCURVE('',#2672,#2925); +#2925 = DEFINITIONAL_REPRESENTATION('',(#2926),#2930); +#2926 = LINE('',#2927,#2928); +#2927 = CARTESIAN_POINT('',(0.,-0.41)); +#2928 = VECTOR('',#2929,1.); +#2929 = DIRECTION('',(1.,0.)); +#2930 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2931 = ORIENTED_EDGE('',*,*,#2932,.T.); +#2932 = EDGE_CURVE('',#2910,#2933,#2935,.T.); +#2933 = VERTEX_POINT('',#2934); +#2934 = CARTESIAN_POINT('',(2.65,3.605,0.2)); +#2935 = SURFACE_CURVE('',#2936,(#2940,#2947),.PCURVE_S1.); +#2936 = LINE('',#2937,#2938); +#2937 = CARTESIAN_POINT('',(3.,3.605,0.2)); +#2938 = VECTOR('',#2939,1.); +#2939 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#2940 = PCURVE('',#2343,#2941); +#2941 = DEFINITIONAL_REPRESENTATION('',(#2942),#2946); +#2942 = LINE('',#2943,#2944); +#2943 = CARTESIAN_POINT('',(-0.332659657565,-0.58421032799)); +#2944 = VECTOR('',#2945,1.); +#2945 = DIRECTION('',(0.,1.)); +#2946 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2947 = PCURVE('',#2700,#2948); +#2948 = DEFINITIONAL_REPRESENTATION('',(#2949),#2953); +#2949 = LINE('',#2950,#2951); +#2950 = CARTESIAN_POINT('',(9.103828801925E-17,-0.41)); +#2951 = VECTOR('',#2952,1.); +#2952 = DIRECTION('',(1.,0.)); +#2953 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2954 = ORIENTED_EDGE('',*,*,#2955,.T.); +#2955 = EDGE_CURVE('',#2933,#2956,#2958,.T.); +#2956 = VERTEX_POINT('',#2957); +#2957 = CARTESIAN_POINT('',(2.55,3.605,0.3)); +#2958 = SURFACE_CURVE('',#2959,(#2964,#2975),.PCURVE_S1.); +#2959 = CIRCLE('',#2960,0.1); +#2960 = AXIS2_PLACEMENT_3D('',#2961,#2962,#2963); +#2961 = CARTESIAN_POINT('',(2.65,3.605,0.3)); +#2962 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#2963 = DIRECTION('',(0.,0.,-1.)); +#2964 = PCURVE('',#2343,#2965); +#2965 = DEFINITIONAL_REPRESENTATION('',(#2966),#2974); +#2966 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#2967,#2968,#2969,#2970, +#2971,#2972,#2973),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#2967 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#2968 = CARTESIAN_POINT('',(-0.332659657565,-6.100524723311E-02)); +#2969 = CARTESIAN_POINT('',(-0.182659657565,-0.147607787612)); +#2970 = CARTESIAN_POINT('',(-3.2659657565E-02,-0.23421032799)); +#2971 = CARTESIAN_POINT('',(-0.182659657565,-0.320812868368)); +#2972 = CARTESIAN_POINT('',(-0.332659657565,-0.407415408747)); +#2973 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#2974 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2975 = PCURVE('',#2733,#2976); +#2976 = DEFINITIONAL_REPRESENTATION('',(#2977),#2981); +#2977 = LINE('',#2978,#2979); +#2978 = CARTESIAN_POINT('',(0.,-0.41)); +#2979 = VECTOR('',#2980,1.); +#2980 = DIRECTION('',(1.,0.)); +#2981 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2982 = ORIENTED_EDGE('',*,*,#2983,.T.); +#2983 = EDGE_CURVE('',#2956,#2984,#2986,.T.); +#2984 = VERTEX_POINT('',#2985); +#2985 = CARTESIAN_POINT('',(2.55,3.605,0.725)); +#2986 = SURFACE_CURVE('',#2987,(#2991,#2998),.PCURVE_S1.); +#2987 = LINE('',#2988,#2989); +#2988 = CARTESIAN_POINT('',(2.55,3.605,0.3)); +#2989 = VECTOR('',#2990,1.); +#2990 = DIRECTION('',(0.,0.,1.)); +#2991 = PCURVE('',#2343,#2992); +#2992 = DEFINITIONAL_REPRESENTATION('',(#2993),#2997); +#2993 = LINE('',#2994,#2995); +#2994 = CARTESIAN_POINT('',(-0.232659657565,-0.13421032799)); +#2995 = VECTOR('',#2996,1.); +#2996 = DIRECTION('',(1.,0.)); +#2997 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#2998 = PCURVE('',#2761,#2999); +#2999 = DEFINITIONAL_REPRESENTATION('',(#3000),#3004); +#3000 = LINE('',#3001,#3002); +#3001 = CARTESIAN_POINT('',(0.,-0.41)); +#3002 = VECTOR('',#3003,1.); +#3003 = DIRECTION('',(1.,0.)); +#3004 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3005 = ORIENTED_EDGE('',*,*,#3006,.T.); +#3006 = EDGE_CURVE('',#2984,#3007,#3009,.T.); +#3007 = VERTEX_POINT('',#3008); +#3008 = CARTESIAN_POINT('',(2.25,3.605,1.025)); +#3009 = SURFACE_CURVE('',#3010,(#3015,#3022),.PCURVE_S1.); +#3010 = CIRCLE('',#3011,0.3); +#3011 = AXIS2_PLACEMENT_3D('',#3012,#3013,#3014); +#3012 = CARTESIAN_POINT('',(2.25,3.605,0.725)); +#3013 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#3014 = DIRECTION('',(1.,2.22044604925E-16,3.700743415417E-16)); +#3015 = PCURVE('',#2343,#3016); +#3016 = DEFINITIONAL_REPRESENTATION('',(#3017),#3021); +#3017 = CIRCLE('',#3018,0.3); +#3018 = AXIS2_PLACEMENT_2D('',#3019,#3020); +#3019 = CARTESIAN_POINT('',(0.192340342435,0.16578967201)); +#3020 = DIRECTION('',(3.700743415417E-16,-1.)); +#3021 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3022 = PCURVE('',#2790,#3023); +#3023 = DEFINITIONAL_REPRESENTATION('',(#3024),#3028); +#3024 = LINE('',#3025,#3026); +#3025 = CARTESIAN_POINT('',(6.28318530718,-0.41)); +#3026 = VECTOR('',#3027,1.); +#3027 = DIRECTION('',(-1.,0.)); +#3028 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3029 = ORIENTED_EDGE('',*,*,#3030,.T.); +#3030 = EDGE_CURVE('',#3007,#2832,#3031,.T.); +#3031 = SURFACE_CURVE('',#3032,(#3036,#3043),.PCURVE_S1.); +#3032 = LINE('',#3033,#3034); +#3033 = CARTESIAN_POINT('',(2.25,3.605,1.025)); +#3034 = VECTOR('',#3035,1.); +#3035 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#3036 = PCURVE('',#2343,#3037); +#3037 = DEFINITIONAL_REPRESENTATION('',(#3038),#3042); +#3038 = LINE('',#3039,#3040); +#3039 = CARTESIAN_POINT('',(0.492340342435,0.16578967201)); +#3040 = VECTOR('',#3041,1.); +#3041 = DIRECTION('',(0.,1.)); +#3042 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3043 = PCURVE('',#2816,#3044); +#3044 = DEFINITIONAL_REPRESENTATION('',(#3045),#3049); +#3045 = LINE('',#3046,#3047); +#3046 = CARTESIAN_POINT('',(9.103828801925E-17,-0.41)); +#3047 = VECTOR('',#3048,1.); +#3048 = DIRECTION('',(1.,0.)); +#3049 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3050 = ADVANCED_FACE('',(#3051),#2460,.F.); +#3051 = FACE_BOUND('',#3052,.F.); +#3052 = EDGE_LOOP('',(#3053,#3082,#3109,#3137,#3165,#3193,#3221,#3249, + #3277,#3305,#3333,#3361,#3389,#3417,#3445,#3466,#3467,#3490)); +#3053 = ORIENTED_EDGE('',*,*,#3054,.T.); +#3054 = EDGE_CURVE('',#3055,#3057,#3059,.T.); +#3055 = VERTEX_POINT('',#3056); +#3056 = CARTESIAN_POINT('',(1.835171280765,4.117585640382,0.1)); +#3057 = VERTEX_POINT('',#3058); +#3058 = CARTESIAN_POINT('',(1.835171280765,-4.117585640382,0.1)); +#3059 = SURFACE_CURVE('',#3060,(#3064,#3070),.PCURVE_S1.); +#3060 = LINE('',#3061,#3062); +#3061 = CARTESIAN_POINT('',(1.835171280765,4.117585640382,0.1)); +#3062 = VECTOR('',#3063,1.); +#3063 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#3064 = PCURVE('',#2460,#3065); +#3065 = DEFINITIONAL_REPRESENTATION('',(#3066),#3069); +#3066 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3067,#3068),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,8.235171280764),.PIECEWISE_BEZIER_KNOTS.); +#3067 = CARTESIAN_POINT('',(-5.26757239086E-16,1.224928093993E-17)); +#3068 = CARTESIAN_POINT('',(8.35,3.656916022696E-16)); +#3069 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3070 = PCURVE('',#3071,#3076); +#3071 = PLANE('',#3072); +#3072 = AXIS2_PLACEMENT_3D('',#3073,#3074,#3075); +#3073 = CARTESIAN_POINT('',(-1.717585640382,4.235171280765,0.1)); +#3074 = DIRECTION('',(0.,0.,1.)); +#3075 = DIRECTION('',(0.375822427863,-0.92669169777,0.)); +#3076 = DEFINITIONAL_REPRESENTATION('',(#3077),#3081); +#3077 = LINE('',#3078,#3079); +#3078 = CARTESIAN_POINT('',(1.444171368432,3.24811902217)); +#3079 = VECTOR('',#3080,1.); +#3080 = DIRECTION('',(0.92669169777,-0.375822427863)); +#3081 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3082 = ORIENTED_EDGE('',*,*,#3083,.T.); +#3083 = EDGE_CURVE('',#3057,#3084,#3086,.T.); +#3084 = VERTEX_POINT('',#3085); +#3085 = CARTESIAN_POINT('',(1.95,-4.175,0.825)); +#3086 = SURFACE_CURVE('',#3087,(#3090,#3097),.PCURVE_S1.); +#3087 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3088,#3089),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#3088 = CARTESIAN_POINT('',(1.835171280765,-4.117585640382,0.1)); +#3089 = CARTESIAN_POINT('',(1.95,-4.175,0.825)); +#3090 = PCURVE('',#2460,#3091); +#3091 = DEFINITIONAL_REPRESENTATION('',(#3092),#3096); +#3092 = LINE('',#3093,#3094); +#3093 = CARTESIAN_POINT('',(8.35,-4.512195866308E-17)); +#3094 = VECTOR('',#3095,1.); +#3095 = DIRECTION('',(-1.7763568394E-15,1.)); +#3096 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3097 = PCURVE('',#3098,#3103); +#3098 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#3099,#3100) + ,(#3101,#3102 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#3099 = CARTESIAN_POINT('',(1.835171280765,-4.117585640382,0.1)); +#3100 = CARTESIAN_POINT('',(1.95,-4.175,0.825)); +#3101 = CARTESIAN_POINT('',(1.717585640382,-4.235171280765,0.1)); +#3102 = CARTESIAN_POINT('',(1.775,-4.35,0.825)); +#3103 = DEFINITIONAL_REPRESENTATION('',(#3104),#3108); +#3104 = LINE('',#3105,#3106); +#3105 = CARTESIAN_POINT('',(7.708212170719E-16,2.90303552035E-17)); +#3106 = VECTOR('',#3107,1.); +#3107 = DIRECTION('',(-3.959911512563E-16,1.)); +#3108 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3109 = ORIENTED_EDGE('',*,*,#3110,.F.); +#3110 = EDGE_CURVE('',#3111,#3084,#3113,.T.); +#3111 = VERTEX_POINT('',#3112); +#3112 = CARTESIAN_POINT('',(1.95,-4.015,0.825)); +#3113 = SURFACE_CURVE('',#3114,(#3118,#3125),.PCURVE_S1.); +#3114 = LINE('',#3115,#3116); +#3115 = CARTESIAN_POINT('',(1.95,4.175,0.825)); +#3116 = VECTOR('',#3117,1.); +#3117 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#3118 = PCURVE('',#2460,#3119); +#3119 = DEFINITIONAL_REPRESENTATION('',(#3120),#3124); +#3120 = LINE('',#3121,#3122); +#3121 = CARTESIAN_POINT('',(0.,1.)); +#3122 = VECTOR('',#3123,1.); +#3123 = DIRECTION('',(1.,0.)); +#3124 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3125 = PCURVE('',#3126,#3131); +#3126 = PLANE('',#3127); +#3127 = AXIS2_PLACEMENT_3D('',#3128,#3129,#3130); +#3128 = CARTESIAN_POINT('',(1.95,4.175,1.025)); +#3129 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#3130 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#3131 = DEFINITIONAL_REPRESENTATION('',(#3132),#3136); +#3132 = LINE('',#3133,#3134); +#3133 = CARTESIAN_POINT('',(0.,-0.2)); +#3134 = VECTOR('',#3135,1.); +#3135 = DIRECTION('',(1.,0.)); +#3136 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3137 = ORIENTED_EDGE('',*,*,#3138,.F.); +#3138 = EDGE_CURVE('',#3139,#3111,#3141,.T.); +#3139 = VERTEX_POINT('',#3140); +#3140 = CARTESIAN_POINT('',(1.95,-3.605,0.825)); +#3141 = SURFACE_CURVE('',#3142,(#3146,#3153),.PCURVE_S1.); +#3142 = LINE('',#3143,#3144); +#3143 = CARTESIAN_POINT('',(1.95,4.175,0.825)); +#3144 = VECTOR('',#3145,1.); +#3145 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#3146 = PCURVE('',#2460,#3147); +#3147 = DEFINITIONAL_REPRESENTATION('',(#3148),#3152); +#3148 = LINE('',#3149,#3150); +#3149 = CARTESIAN_POINT('',(0.,1.)); +#3150 = VECTOR('',#3151,1.); +#3151 = DIRECTION('',(1.,0.)); +#3152 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3153 = PCURVE('',#3154,#3159); +#3154 = PLANE('',#3155); +#3155 = AXIS2_PLACEMENT_3D('',#3156,#3157,#3158); +#3156 = CARTESIAN_POINT('',(1.8,-3.605,0.825)); +#3157 = DIRECTION('',(0.,0.,1.)); +#3158 = DIRECTION('',(1.,2.22044604925E-16,-0.)); +#3159 = DEFINITIONAL_REPRESENTATION('',(#3160),#3164); +#3160 = LINE('',#3161,#3162); +#3161 = CARTESIAN_POINT('',(0.15,7.78)); +#3162 = VECTOR('',#3163,1.); +#3163 = DIRECTION('',(0.,-1.)); +#3164 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3165 = ORIENTED_EDGE('',*,*,#3166,.F.); +#3166 = EDGE_CURVE('',#3167,#3139,#3169,.T.); +#3167 = VERTEX_POINT('',#3168); +#3168 = CARTESIAN_POINT('',(1.95,-2.745,0.825)); +#3169 = SURFACE_CURVE('',#3170,(#3174,#3181),.PCURVE_S1.); +#3170 = LINE('',#3171,#3172); +#3171 = CARTESIAN_POINT('',(1.95,4.175,0.825)); +#3172 = VECTOR('',#3173,1.); +#3173 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#3174 = PCURVE('',#2460,#3175); +#3175 = DEFINITIONAL_REPRESENTATION('',(#3176),#3180); +#3176 = LINE('',#3177,#3178); +#3177 = CARTESIAN_POINT('',(0.,1.)); +#3178 = VECTOR('',#3179,1.); +#3179 = DIRECTION('',(1.,0.)); +#3180 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3181 = PCURVE('',#3182,#3187); +#3182 = PLANE('',#3183); +#3183 = AXIS2_PLACEMENT_3D('',#3184,#3185,#3186); +#3184 = CARTESIAN_POINT('',(1.95,4.175,1.025)); +#3185 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#3186 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#3187 = DEFINITIONAL_REPRESENTATION('',(#3188),#3192); +#3188 = LINE('',#3189,#3190); +#3189 = CARTESIAN_POINT('',(0.,-0.2)); +#3190 = VECTOR('',#3191,1.); +#3191 = DIRECTION('',(1.,0.)); +#3192 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3193 = ORIENTED_EDGE('',*,*,#3194,.F.); +#3194 = EDGE_CURVE('',#3195,#3167,#3197,.T.); +#3195 = VERTEX_POINT('',#3196); +#3196 = CARTESIAN_POINT('',(1.95,-2.335,0.825)); +#3197 = SURFACE_CURVE('',#3198,(#3202,#3209),.PCURVE_S1.); +#3198 = LINE('',#3199,#3200); +#3199 = CARTESIAN_POINT('',(1.95,4.175,0.825)); +#3200 = VECTOR('',#3201,1.); +#3201 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#3202 = PCURVE('',#2460,#3203); +#3203 = DEFINITIONAL_REPRESENTATION('',(#3204),#3208); +#3204 = LINE('',#3205,#3206); +#3205 = CARTESIAN_POINT('',(0.,1.)); +#3206 = VECTOR('',#3207,1.); +#3207 = DIRECTION('',(1.,0.)); +#3208 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3209 = PCURVE('',#3210,#3215); +#3210 = PLANE('',#3211); +#3211 = AXIS2_PLACEMENT_3D('',#3212,#3213,#3214); +#3212 = CARTESIAN_POINT('',(1.8,-2.335,0.825)); +#3213 = DIRECTION('',(0.,0.,1.)); +#3214 = DIRECTION('',(1.,2.22044604925E-16,-0.)); +#3215 = DEFINITIONAL_REPRESENTATION('',(#3216),#3220); +#3216 = LINE('',#3217,#3218); +#3217 = CARTESIAN_POINT('',(0.15,6.51)); +#3218 = VECTOR('',#3219,1.); +#3219 = DIRECTION('',(0.,-1.)); +#3220 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3221 = ORIENTED_EDGE('',*,*,#3222,.F.); +#3222 = EDGE_CURVE('',#3223,#3195,#3225,.T.); +#3223 = VERTEX_POINT('',#3224); +#3224 = CARTESIAN_POINT('',(1.95,-1.475,0.825)); +#3225 = SURFACE_CURVE('',#3226,(#3230,#3237),.PCURVE_S1.); +#3226 = LINE('',#3227,#3228); +#3227 = CARTESIAN_POINT('',(1.95,4.175,0.825)); +#3228 = VECTOR('',#3229,1.); +#3229 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#3230 = PCURVE('',#2460,#3231); +#3231 = DEFINITIONAL_REPRESENTATION('',(#3232),#3236); +#3232 = LINE('',#3233,#3234); +#3233 = CARTESIAN_POINT('',(0.,1.)); +#3234 = VECTOR('',#3235,1.); +#3235 = DIRECTION('',(1.,0.)); +#3236 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3237 = PCURVE('',#3238,#3243); +#3238 = PLANE('',#3239); +#3239 = AXIS2_PLACEMENT_3D('',#3240,#3241,#3242); +#3240 = CARTESIAN_POINT('',(1.95,4.175,1.025)); +#3241 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#3242 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#3243 = DEFINITIONAL_REPRESENTATION('',(#3244),#3248); +#3244 = LINE('',#3245,#3246); +#3245 = CARTESIAN_POINT('',(0.,-0.2)); +#3246 = VECTOR('',#3247,1.); +#3247 = DIRECTION('',(1.,0.)); +#3248 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3249 = ORIENTED_EDGE('',*,*,#3250,.F.); +#3250 = EDGE_CURVE('',#3251,#3223,#3253,.T.); +#3251 = VERTEX_POINT('',#3252); +#3252 = CARTESIAN_POINT('',(1.95,-1.065,0.825)); +#3253 = SURFACE_CURVE('',#3254,(#3258,#3265),.PCURVE_S1.); +#3254 = LINE('',#3255,#3256); +#3255 = CARTESIAN_POINT('',(1.95,4.175,0.825)); +#3256 = VECTOR('',#3257,1.); +#3257 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#3258 = PCURVE('',#2460,#3259); +#3259 = DEFINITIONAL_REPRESENTATION('',(#3260),#3264); +#3260 = LINE('',#3261,#3262); +#3261 = CARTESIAN_POINT('',(0.,1.)); +#3262 = VECTOR('',#3263,1.); +#3263 = DIRECTION('',(1.,0.)); +#3264 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3265 = PCURVE('',#3266,#3271); +#3266 = PLANE('',#3267); +#3267 = AXIS2_PLACEMENT_3D('',#3268,#3269,#3270); +#3268 = CARTESIAN_POINT('',(1.8,-1.065,0.825)); +#3269 = DIRECTION('',(0.,0.,1.)); +#3270 = DIRECTION('',(1.,2.22044604925E-16,-0.)); +#3271 = DEFINITIONAL_REPRESENTATION('',(#3272),#3276); +#3272 = LINE('',#3273,#3274); +#3273 = CARTESIAN_POINT('',(0.15,5.24)); +#3274 = VECTOR('',#3275,1.); +#3275 = DIRECTION('',(0.,-1.)); +#3276 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3277 = ORIENTED_EDGE('',*,*,#3278,.F.); +#3278 = EDGE_CURVE('',#3279,#3251,#3281,.T.); +#3279 = VERTEX_POINT('',#3280); +#3280 = CARTESIAN_POINT('',(1.95,-0.205,0.825)); +#3281 = SURFACE_CURVE('',#3282,(#3286,#3293),.PCURVE_S1.); +#3282 = LINE('',#3283,#3284); +#3283 = CARTESIAN_POINT('',(1.95,4.175,0.825)); +#3284 = VECTOR('',#3285,1.); +#3285 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#3286 = PCURVE('',#2460,#3287); +#3287 = DEFINITIONAL_REPRESENTATION('',(#3288),#3292); +#3288 = LINE('',#3289,#3290); +#3289 = CARTESIAN_POINT('',(0.,1.)); +#3290 = VECTOR('',#3291,1.); +#3291 = DIRECTION('',(1.,0.)); +#3292 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3293 = PCURVE('',#3294,#3299); +#3294 = PLANE('',#3295); +#3295 = AXIS2_PLACEMENT_3D('',#3296,#3297,#3298); +#3296 = CARTESIAN_POINT('',(1.95,4.175,1.025)); +#3297 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#3298 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#3299 = DEFINITIONAL_REPRESENTATION('',(#3300),#3304); +#3300 = LINE('',#3301,#3302); +#3301 = CARTESIAN_POINT('',(0.,-0.2)); +#3302 = VECTOR('',#3303,1.); +#3303 = DIRECTION('',(1.,0.)); +#3304 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3305 = ORIENTED_EDGE('',*,*,#3306,.F.); +#3306 = EDGE_CURVE('',#3307,#3279,#3309,.T.); +#3307 = VERTEX_POINT('',#3308); +#3308 = CARTESIAN_POINT('',(1.95,0.205,0.825)); +#3309 = SURFACE_CURVE('',#3310,(#3314,#3321),.PCURVE_S1.); +#3310 = LINE('',#3311,#3312); +#3311 = CARTESIAN_POINT('',(1.95,4.175,0.825)); +#3312 = VECTOR('',#3313,1.); +#3313 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#3314 = PCURVE('',#2460,#3315); +#3315 = DEFINITIONAL_REPRESENTATION('',(#3316),#3320); +#3316 = LINE('',#3317,#3318); +#3317 = CARTESIAN_POINT('',(0.,1.)); +#3318 = VECTOR('',#3319,1.); +#3319 = DIRECTION('',(1.,0.)); +#3320 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3321 = PCURVE('',#3322,#3327); +#3322 = PLANE('',#3323); +#3323 = AXIS2_PLACEMENT_3D('',#3324,#3325,#3326); +#3324 = CARTESIAN_POINT('',(1.8,0.205,0.825)); +#3325 = DIRECTION('',(0.,0.,1.)); +#3326 = DIRECTION('',(1.,2.22044604925E-16,-0.)); +#3327 = DEFINITIONAL_REPRESENTATION('',(#3328),#3332); +#3328 = LINE('',#3329,#3330); +#3329 = CARTESIAN_POINT('',(0.15,3.97)); +#3330 = VECTOR('',#3331,1.); +#3331 = DIRECTION('',(0.,-1.)); +#3332 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3333 = ORIENTED_EDGE('',*,*,#3334,.F.); +#3334 = EDGE_CURVE('',#3335,#3307,#3337,.T.); +#3335 = VERTEX_POINT('',#3336); +#3336 = CARTESIAN_POINT('',(1.95,1.065,0.825)); +#3337 = SURFACE_CURVE('',#3338,(#3342,#3349),.PCURVE_S1.); +#3338 = LINE('',#3339,#3340); +#3339 = CARTESIAN_POINT('',(1.95,4.175,0.825)); +#3340 = VECTOR('',#3341,1.); +#3341 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#3342 = PCURVE('',#2460,#3343); +#3343 = DEFINITIONAL_REPRESENTATION('',(#3344),#3348); +#3344 = LINE('',#3345,#3346); +#3345 = CARTESIAN_POINT('',(0.,1.)); +#3346 = VECTOR('',#3347,1.); +#3347 = DIRECTION('',(1.,0.)); +#3348 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3349 = PCURVE('',#3350,#3355); +#3350 = PLANE('',#3351); +#3351 = AXIS2_PLACEMENT_3D('',#3352,#3353,#3354); +#3352 = CARTESIAN_POINT('',(1.95,4.175,1.025)); +#3353 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#3354 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#3355 = DEFINITIONAL_REPRESENTATION('',(#3356),#3360); +#3356 = LINE('',#3357,#3358); +#3357 = CARTESIAN_POINT('',(0.,-0.2)); +#3358 = VECTOR('',#3359,1.); +#3359 = DIRECTION('',(1.,0.)); +#3360 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3361 = ORIENTED_EDGE('',*,*,#3362,.F.); +#3362 = EDGE_CURVE('',#3363,#3335,#3365,.T.); +#3363 = VERTEX_POINT('',#3364); +#3364 = CARTESIAN_POINT('',(1.95,1.475,0.825)); +#3365 = SURFACE_CURVE('',#3366,(#3370,#3377),.PCURVE_S1.); +#3366 = LINE('',#3367,#3368); +#3367 = CARTESIAN_POINT('',(1.95,4.175,0.825)); +#3368 = VECTOR('',#3369,1.); +#3369 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#3370 = PCURVE('',#2460,#3371); +#3371 = DEFINITIONAL_REPRESENTATION('',(#3372),#3376); +#3372 = LINE('',#3373,#3374); +#3373 = CARTESIAN_POINT('',(0.,1.)); +#3374 = VECTOR('',#3375,1.); +#3375 = DIRECTION('',(1.,-5.415722071342E-16)); +#3376 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3377 = PCURVE('',#3378,#3383); +#3378 = PLANE('',#3379); +#3379 = AXIS2_PLACEMENT_3D('',#3380,#3381,#3382); +#3380 = CARTESIAN_POINT('',(1.8,1.475,0.825)); +#3381 = DIRECTION('',(0.,0.,1.)); +#3382 = DIRECTION('',(1.,2.22044604925E-16,-0.)); +#3383 = DEFINITIONAL_REPRESENTATION('',(#3384),#3388); +#3384 = LINE('',#3385,#3386); +#3385 = CARTESIAN_POINT('',(0.15,2.7)); +#3386 = VECTOR('',#3387,1.); +#3387 = DIRECTION('',(0.,-1.)); +#3388 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3389 = ORIENTED_EDGE('',*,*,#3390,.F.); +#3390 = EDGE_CURVE('',#3391,#3363,#3393,.T.); +#3391 = VERTEX_POINT('',#3392); +#3392 = CARTESIAN_POINT('',(1.95,2.335,0.825)); +#3393 = SURFACE_CURVE('',#3394,(#3398,#3405),.PCURVE_S1.); +#3394 = LINE('',#3395,#3396); +#3395 = CARTESIAN_POINT('',(1.95,4.175,0.825)); +#3396 = VECTOR('',#3397,1.); +#3397 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#3398 = PCURVE('',#2460,#3399); +#3399 = DEFINITIONAL_REPRESENTATION('',(#3400),#3404); +#3400 = LINE('',#3401,#3402); +#3401 = CARTESIAN_POINT('',(0.,1.)); +#3402 = VECTOR('',#3403,1.); +#3403 = DIRECTION('',(1.,0.)); +#3404 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3405 = PCURVE('',#3406,#3411); +#3406 = PLANE('',#3407); +#3407 = AXIS2_PLACEMENT_3D('',#3408,#3409,#3410); +#3408 = CARTESIAN_POINT('',(1.95,4.175,1.025)); +#3409 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#3410 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#3411 = DEFINITIONAL_REPRESENTATION('',(#3412),#3416); +#3412 = LINE('',#3413,#3414); +#3413 = CARTESIAN_POINT('',(0.,-0.2)); +#3414 = VECTOR('',#3415,1.); +#3415 = DIRECTION('',(1.,0.)); +#3416 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3417 = ORIENTED_EDGE('',*,*,#3418,.F.); +#3418 = EDGE_CURVE('',#3419,#3391,#3421,.T.); +#3419 = VERTEX_POINT('',#3420); +#3420 = CARTESIAN_POINT('',(1.95,2.745,0.825)); +#3421 = SURFACE_CURVE('',#3422,(#3426,#3433),.PCURVE_S1.); +#3422 = LINE('',#3423,#3424); +#3423 = CARTESIAN_POINT('',(1.95,4.175,0.825)); +#3424 = VECTOR('',#3425,1.); +#3425 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#3426 = PCURVE('',#2460,#3427); +#3427 = DEFINITIONAL_REPRESENTATION('',(#3428),#3432); +#3428 = LINE('',#3429,#3430); +#3429 = CARTESIAN_POINT('',(0.,1.)); +#3430 = VECTOR('',#3431,1.); +#3431 = DIRECTION('',(1.,5.415722071342E-16)); +#3432 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3433 = PCURVE('',#3434,#3439); +#3434 = PLANE('',#3435); +#3435 = AXIS2_PLACEMENT_3D('',#3436,#3437,#3438); +#3436 = CARTESIAN_POINT('',(1.8,2.745,0.825)); +#3437 = DIRECTION('',(0.,0.,1.)); +#3438 = DIRECTION('',(1.,2.22044604925E-16,-0.)); +#3439 = DEFINITIONAL_REPRESENTATION('',(#3440),#3444); +#3440 = LINE('',#3441,#3442); +#3441 = CARTESIAN_POINT('',(0.15,1.43)); +#3442 = VECTOR('',#3443,1.); +#3443 = DIRECTION('',(0.,-1.)); +#3444 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3445 = ORIENTED_EDGE('',*,*,#3446,.F.); +#3446 = EDGE_CURVE('',#2445,#3419,#3447,.T.); +#3447 = SURFACE_CURVE('',#3448,(#3452,#3459),.PCURVE_S1.); +#3448 = LINE('',#3449,#3450); +#3449 = CARTESIAN_POINT('',(1.95,4.175,0.825)); +#3450 = VECTOR('',#3451,1.); +#3451 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#3452 = PCURVE('',#2460,#3453); +#3453 = DEFINITIONAL_REPRESENTATION('',(#3454),#3458); +#3454 = LINE('',#3455,#3456); +#3455 = CARTESIAN_POINT('',(-1.110223024625E-16,1.)); +#3456 = VECTOR('',#3457,1.); +#3457 = DIRECTION('',(1.,0.)); +#3458 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3459 = PCURVE('',#2847,#3460); +#3460 = DEFINITIONAL_REPRESENTATION('',(#3461),#3465); +#3461 = LINE('',#3462,#3463); +#3462 = CARTESIAN_POINT('',(0.,-0.2)); +#3463 = VECTOR('',#3464,1.); +#3464 = DIRECTION('',(1.,0.)); +#3465 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3466 = ORIENTED_EDGE('',*,*,#2444,.F.); +#3467 = ORIENTED_EDGE('',*,*,#3468,.F.); +#3468 = EDGE_CURVE('',#3469,#2422,#3471,.T.); +#3469 = VERTEX_POINT('',#3470); +#3470 = CARTESIAN_POINT('',(1.95,4.175,0.825)); +#3471 = SURFACE_CURVE('',#3472,(#3476,#3483),.PCURVE_S1.); +#3472 = LINE('',#3473,#3474); +#3473 = CARTESIAN_POINT('',(1.95,4.175,0.825)); +#3474 = VECTOR('',#3475,1.); +#3475 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#3476 = PCURVE('',#2460,#3477); +#3477 = DEFINITIONAL_REPRESENTATION('',(#3478),#3482); +#3478 = LINE('',#3479,#3480); +#3479 = CARTESIAN_POINT('',(-3.483321490182E-17,1.)); +#3480 = VECTOR('',#3481,1.); +#3481 = DIRECTION('',(1.,0.)); +#3482 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3483 = PCURVE('',#2589,#3484); +#3484 = DEFINITIONAL_REPRESENTATION('',(#3485),#3489); +#3485 = LINE('',#3486,#3487); +#3486 = CARTESIAN_POINT('',(0.,-0.2)); +#3487 = VECTOR('',#3488,1.); +#3488 = DIRECTION('',(1.,0.)); +#3489 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3490 = ORIENTED_EDGE('',*,*,#3491,.F.); +#3491 = EDGE_CURVE('',#3055,#3469,#3492,.T.); +#3492 = SURFACE_CURVE('',#3493,(#3496,#3503),.PCURVE_S1.); +#3493 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3494,#3495),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#3494 = CARTESIAN_POINT('',(1.835171280765,4.117585640382,0.1)); +#3495 = CARTESIAN_POINT('',(1.95,4.175,0.825)); +#3496 = PCURVE('',#2460,#3497); +#3497 = DEFINITIONAL_REPRESENTATION('',(#3498),#3502); +#3498 = LINE('',#3499,#3500); +#3499 = CARTESIAN_POINT('',(-5.26757239086E-16,1.224928093993E-17)); +#3500 = VECTOR('',#3501,1.); +#3501 = DIRECTION('',(4.946409333099E-16,1.)); +#3502 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3503 = PCURVE('',#3504,#3509); +#3504 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#3505,#3506) + ,(#3507,#3508 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#3505 = CARTESIAN_POINT('',(1.717585640382,4.235171280765,0.1)); +#3506 = CARTESIAN_POINT('',(1.775,4.35,0.825)); +#3507 = CARTESIAN_POINT('',(1.835171280765,4.117585640382,0.1)); +#3508 = CARTESIAN_POINT('',(1.95,4.175,0.825)); +#3509 = DEFINITIONAL_REPRESENTATION('',(#3510),#3514); +#3510 = LINE('',#3511,#3512); +#3511 = CARTESIAN_POINT('',(0.247487373415,-1.190288331173E-17)); +#3512 = VECTOR('',#3513,1.); +#3513 = DIRECTION('',(4.718447854657E-16,1.)); +#3514 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3515 = ADVANCED_FACE('',(#3516),#2537,.T.); +#3516 = FACE_BOUND('',#3517,.T.); +#3517 = EDGE_LOOP('',(#3518,#3519,#3540,#3541)); +#3518 = ORIENTED_EDGE('',*,*,#2604,.T.); +#3519 = ORIENTED_EDGE('',*,*,#3520,.T.); +#3520 = EDGE_CURVE('',#2605,#2863,#3521,.T.); +#3521 = SURFACE_CURVE('',#3522,(#3526,#3533),.PCURVE_S1.); +#3522 = LINE('',#3523,#3524); +#3523 = CARTESIAN_POINT('',(2.65,4.015,5.551115123126E-17)); +#3524 = VECTOR('',#3525,1.); +#3525 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#3526 = PCURVE('',#2537,#3527); +#3527 = DEFINITIONAL_REPRESENTATION('',(#3528),#3532); +#3528 = LINE('',#3529,#3530); +#3529 = CARTESIAN_POINT('',(4.712388980385,0.)); +#3530 = VECTOR('',#3531,1.); +#3531 = DIRECTION('',(0.,-1.)); +#3532 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3533 = PCURVE('',#2644,#3534); +#3534 = DEFINITIONAL_REPRESENTATION('',(#3535),#3539); +#3535 = LINE('',#3536,#3537); +#3536 = CARTESIAN_POINT('',(0.,0.)); +#3537 = VECTOR('',#3538,1.); +#3538 = DIRECTION('',(0.,-1.)); +#3539 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3540 = ORIENTED_EDGE('',*,*,#2862,.F.); +#3541 = ORIENTED_EDGE('',*,*,#2521,.F.); +#3542 = ADVANCED_FACE('',(#3543),#2589,.F.); +#3543 = FACE_BOUND('',#3544,.F.); +#3544 = EDGE_LOOP('',(#3545,#3570,#3571,#3572)); +#3545 = ORIENTED_EDGE('',*,*,#3546,.F.); +#3546 = EDGE_CURVE('',#3469,#3547,#3549,.T.); +#3547 = VERTEX_POINT('',#3548); +#3548 = CARTESIAN_POINT('',(1.95,4.175,1.025)); +#3549 = SURFACE_CURVE('',#3550,(#3553,#3559),.PCURVE_S1.); +#3550 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3551,#3552),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#3551 = CARTESIAN_POINT('',(1.95,4.175,0.825)); +#3552 = CARTESIAN_POINT('',(1.95,4.175,1.025)); +#3553 = PCURVE('',#2589,#3554); +#3554 = DEFINITIONAL_REPRESENTATION('',(#3555),#3558); +#3555 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3556,#3557),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#3556 = CARTESIAN_POINT('',(0.,-0.2)); +#3557 = CARTESIAN_POINT('',(0.,0.)); +#3558 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3559 = PCURVE('',#3560,#3565); +#3560 = PLANE('',#3561); +#3561 = AXIS2_PLACEMENT_3D('',#3562,#3563,#3564); +#3562 = CARTESIAN_POINT('',(1.775,4.35,1.025)); +#3563 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#3564 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#3565 = DEFINITIONAL_REPRESENTATION('',(#3566),#3569); +#3566 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3567,#3568),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#3567 = CARTESIAN_POINT('',(0.247487373415,-0.2)); +#3568 = CARTESIAN_POINT('',(0.247487373415,0.)); +#3569 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3570 = ORIENTED_EDGE('',*,*,#3468,.T.); +#3571 = ORIENTED_EDGE('',*,*,#2573,.T.); +#3572 = ORIENTED_EDGE('',*,*,#3573,.F.); +#3573 = EDGE_CURVE('',#3547,#2574,#3574,.T.); +#3574 = SURFACE_CURVE('',#3575,(#3579,#3586),.PCURVE_S1.); +#3575 = LINE('',#3576,#3577); +#3576 = CARTESIAN_POINT('',(1.95,4.175,1.025)); +#3577 = VECTOR('',#3578,1.); +#3578 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#3579 = PCURVE('',#2589,#3580); +#3580 = DEFINITIONAL_REPRESENTATION('',(#3581),#3585); +#3581 = LINE('',#3582,#3583); +#3582 = CARTESIAN_POINT('',(0.,0.)); +#3583 = VECTOR('',#3584,1.); +#3584 = DIRECTION('',(1.,0.)); +#3585 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3586 = PCURVE('',#3587,#3592); +#3587 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#3588,#3589) + ,(#3590,#3591 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,8.35),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#3588 = CARTESIAN_POINT('',(1.95,4.175,1.025)); +#3589 = CARTESIAN_POINT('',(1.875,4.1375,1.025)); +#3590 = CARTESIAN_POINT('',(1.95,-4.175,1.025)); +#3591 = CARTESIAN_POINT('',(1.875,-4.1375,1.025)); +#3592 = DEFINITIONAL_REPRESENTATION('',(#3593),#3597); +#3593 = LINE('',#3594,#3595); +#3594 = CARTESIAN_POINT('',(-3.250147938153E-16,1.933901861802E-15)); +#3595 = VECTOR('',#3596,1.); +#3596 = DIRECTION('',(1.,-2.229871417061E-14)); +#3597 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3598 = ADVANCED_FACE('',(#3599),#2816,.F.); +#3599 = FACE_BOUND('',#3600,.F.); +#3600 = EDGE_LOOP('',(#3601,#3602,#3623,#3624,#3651,#3679)); +#3601 = ORIENTED_EDGE('',*,*,#2802,.F.); +#3602 = ORIENTED_EDGE('',*,*,#3603,.T.); +#3603 = EDGE_CURVE('',#2774,#3007,#3604,.T.); +#3604 = SURFACE_CURVE('',#3605,(#3609,#3616),.PCURVE_S1.); +#3605 = LINE('',#3606,#3607); +#3606 = CARTESIAN_POINT('',(2.25,4.015,1.025)); +#3607 = VECTOR('',#3608,1.); +#3608 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#3609 = PCURVE('',#2816,#3610); +#3610 = DEFINITIONAL_REPRESENTATION('',(#3611),#3615); +#3611 = LINE('',#3612,#3613); +#3612 = CARTESIAN_POINT('',(-0.,0.)); +#3613 = VECTOR('',#3614,1.); +#3614 = DIRECTION('',(0.,-1.)); +#3615 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3616 = PCURVE('',#2790,#3617); +#3617 = DEFINITIONAL_REPRESENTATION('',(#3618),#3622); +#3618 = LINE('',#3619,#3620); +#3619 = CARTESIAN_POINT('',(4.712388980385,0.)); +#3620 = VECTOR('',#3621,1.); +#3621 = DIRECTION('',(0.,-1.)); +#3622 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3623 = ORIENTED_EDGE('',*,*,#3030,.T.); +#3624 = ORIENTED_EDGE('',*,*,#3625,.T.); +#3625 = EDGE_CURVE('',#2832,#3626,#3628,.T.); +#3626 = VERTEX_POINT('',#3627); +#3627 = CARTESIAN_POINT('',(1.875,3.605,1.025)); +#3628 = SURFACE_CURVE('',#3629,(#3633,#3640),.PCURVE_S1.); +#3629 = LINE('',#3630,#3631); +#3630 = CARTESIAN_POINT('',(2.25,3.605,1.025)); +#3631 = VECTOR('',#3632,1.); +#3632 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#3633 = PCURVE('',#2816,#3634); +#3634 = DEFINITIONAL_REPRESENTATION('',(#3635),#3639); +#3635 = LINE('',#3636,#3637); +#3636 = CARTESIAN_POINT('',(9.103828801925E-17,-0.41)); +#3637 = VECTOR('',#3638,1.); +#3638 = DIRECTION('',(1.,0.)); +#3639 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3640 = PCURVE('',#3641,#3646); +#3641 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#3642,#3643) + ,(#3644,#3645 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,8.35),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#3642 = CARTESIAN_POINT('',(1.95,4.175,1.025)); +#3643 = CARTESIAN_POINT('',(1.875,4.1375,1.025)); +#3644 = CARTESIAN_POINT('',(1.95,-4.175,1.025)); +#3645 = CARTESIAN_POINT('',(1.875,-4.1375,1.025)); +#3646 = DEFINITIONAL_REPRESENTATION('',(#3647),#3650); +#3647 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3648,#3649),.UNSPECIFIED.,.F., + .F.,(2,2),(0.3,0.375),.PIECEWISE_BEZIER_KNOTS.); +#3648 = CARTESIAN_POINT('',(0.57,9.11570622888E-16)); +#3649 = CARTESIAN_POINT('',(0.537326283988,1.)); +#3650 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3651 = ORIENTED_EDGE('',*,*,#3652,.F.); +#3652 = EDGE_CURVE('',#3653,#3626,#3655,.T.); +#3653 = VERTEX_POINT('',#3654); +#3654 = CARTESIAN_POINT('',(1.875,4.015,1.025)); +#3655 = SURFACE_CURVE('',#3656,(#3660,#3667),.PCURVE_S1.); +#3656 = LINE('',#3657,#3658); +#3657 = CARTESIAN_POINT('',(1.875,4.1375,1.025)); +#3658 = VECTOR('',#3659,1.); +#3659 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#3660 = PCURVE('',#2816,#3661); +#3661 = DEFINITIONAL_REPRESENTATION('',(#3662),#3666); +#3662 = LINE('',#3663,#3664); +#3663 = CARTESIAN_POINT('',(0.375,0.1225)); +#3664 = VECTOR('',#3665,1.); +#3665 = DIRECTION('',(0.,-1.)); +#3666 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3667 = PCURVE('',#3668,#3673); +#3668 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#3669,#3670) + ,(#3671,#3672 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,8.275),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#3669 = CARTESIAN_POINT('',(1.875,4.1375,1.025)); +#3670 = CARTESIAN_POINT('',(1.760171280765,4.080085640382,1.75)); +#3671 = CARTESIAN_POINT('',(1.875,-4.1375,1.025)); +#3672 = CARTESIAN_POINT('',(1.760171280765,-4.080085640382,1.75)); +#3673 = DEFINITIONAL_REPRESENTATION('',(#3674),#3678); +#3674 = LINE('',#3675,#3676); +#3675 = CARTESIAN_POINT('',(3.608224830032E-16,2.018979276672E-16)); +#3676 = VECTOR('',#3677,1.); +#3677 = DIRECTION('',(1.,-2.308285901505E-16)); +#3678 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3679 = ORIENTED_EDGE('',*,*,#3680,.F.); +#3680 = EDGE_CURVE('',#2574,#3653,#3681,.T.); +#3681 = SURFACE_CURVE('',#3682,(#3686,#3693),.PCURVE_S1.); +#3682 = LINE('',#3683,#3684); +#3683 = CARTESIAN_POINT('',(2.25,4.015,1.025)); +#3684 = VECTOR('',#3685,1.); +#3685 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#3686 = PCURVE('',#2816,#3687); +#3687 = DEFINITIONAL_REPRESENTATION('',(#3688),#3692); +#3688 = LINE('',#3689,#3690); +#3689 = CARTESIAN_POINT('',(-0.,0.)); +#3690 = VECTOR('',#3691,1.); +#3691 = DIRECTION('',(1.,0.)); +#3692 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3693 = PCURVE('',#3587,#3694); +#3694 = DEFINITIONAL_REPRESENTATION('',(#3695),#3698); +#3695 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3696,#3697),.UNSPECIFIED.,.F., + .F.,(2,2),(0.3,0.375),.PIECEWISE_BEZIER_KNOTS.); +#3696 = CARTESIAN_POINT('',(0.16,1.326702326838E-15)); +#3697 = CARTESIAN_POINT('',(0.123610271903,1.)); +#3698 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3699 = ADVANCED_FACE('',(#3700),#2790,.T.); +#3700 = FACE_BOUND('',#3701,.T.); +#3701 = EDGE_LOOP('',(#3702,#3703,#3704,#3705)); +#3702 = ORIENTED_EDGE('',*,*,#2773,.T.); +#3703 = ORIENTED_EDGE('',*,*,#3603,.T.); +#3704 = ORIENTED_EDGE('',*,*,#3006,.F.); +#3705 = ORIENTED_EDGE('',*,*,#3706,.F.); +#3706 = EDGE_CURVE('',#2746,#2984,#3707,.T.); +#3707 = SURFACE_CURVE('',#3708,(#3712,#3719),.PCURVE_S1.); +#3708 = LINE('',#3709,#3710); +#3709 = CARTESIAN_POINT('',(2.55,4.015,0.725)); +#3710 = VECTOR('',#3711,1.); +#3711 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#3712 = PCURVE('',#2790,#3713); +#3713 = DEFINITIONAL_REPRESENTATION('',(#3714),#3718); +#3714 = LINE('',#3715,#3716); +#3715 = CARTESIAN_POINT('',(6.28318530718,0.)); +#3716 = VECTOR('',#3717,1.); +#3717 = DIRECTION('',(0.,-1.)); +#3718 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3719 = PCURVE('',#2761,#3720); +#3720 = DEFINITIONAL_REPRESENTATION('',(#3721),#3725); +#3721 = LINE('',#3722,#3723); +#3722 = CARTESIAN_POINT('',(0.425,0.)); +#3723 = VECTOR('',#3724,1.); +#3724 = DIRECTION('',(0.,-1.)); +#3725 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3726 = ADVANCED_FACE('',(#3727),#2761,.F.); +#3727 = FACE_BOUND('',#3728,.F.); +#3728 = EDGE_LOOP('',(#3729,#3750,#3751,#3752)); +#3729 = ORIENTED_EDGE('',*,*,#3730,.T.); +#3730 = EDGE_CURVE('',#2713,#2956,#3731,.T.); +#3731 = SURFACE_CURVE('',#3732,(#3736,#3743),.PCURVE_S1.); +#3732 = LINE('',#3733,#3734); +#3733 = CARTESIAN_POINT('',(2.55,4.015,0.3)); +#3734 = VECTOR('',#3735,1.); +#3735 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#3736 = PCURVE('',#2761,#3737); +#3737 = DEFINITIONAL_REPRESENTATION('',(#3738),#3742); +#3738 = LINE('',#3739,#3740); +#3739 = CARTESIAN_POINT('',(0.,0.)); +#3740 = VECTOR('',#3741,1.); +#3741 = DIRECTION('',(0.,-1.)); +#3742 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3743 = PCURVE('',#2733,#3744); +#3744 = DEFINITIONAL_REPRESENTATION('',(#3745),#3749); +#3745 = LINE('',#3746,#3747); +#3746 = CARTESIAN_POINT('',(1.570796326795,0.)); +#3747 = VECTOR('',#3748,1.); +#3748 = DIRECTION('',(0.,-1.)); +#3749 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3750 = ORIENTED_EDGE('',*,*,#2983,.T.); +#3751 = ORIENTED_EDGE('',*,*,#3706,.F.); +#3752 = ORIENTED_EDGE('',*,*,#2745,.F.); +#3753 = ADVANCED_FACE('',(#3754),#2733,.F.); +#3754 = FACE_BOUND('',#3755,.F.); +#3755 = EDGE_LOOP('',(#3756,#3777,#3778,#3779)); +#3756 = ORIENTED_EDGE('',*,*,#3757,.T.); +#3757 = EDGE_CURVE('',#2685,#2933,#3758,.T.); +#3758 = SURFACE_CURVE('',#3759,(#3763,#3770),.PCURVE_S1.); +#3759 = LINE('',#3760,#3761); +#3760 = CARTESIAN_POINT('',(2.65,4.015,0.2)); +#3761 = VECTOR('',#3762,1.); +#3762 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#3763 = PCURVE('',#2733,#3764); +#3764 = DEFINITIONAL_REPRESENTATION('',(#3765),#3769); +#3765 = LINE('',#3766,#3767); +#3766 = CARTESIAN_POINT('',(0.,0.)); +#3767 = VECTOR('',#3768,1.); +#3768 = DIRECTION('',(0.,-1.)); +#3769 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3770 = PCURVE('',#2700,#3771); +#3771 = DEFINITIONAL_REPRESENTATION('',(#3772),#3776); +#3772 = LINE('',#3773,#3774); +#3773 = CARTESIAN_POINT('',(0.35,7.771561172375E-17)); +#3774 = VECTOR('',#3775,1.); +#3775 = DIRECTION('',(0.,-1.)); +#3776 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3777 = ORIENTED_EDGE('',*,*,#2955,.T.); +#3778 = ORIENTED_EDGE('',*,*,#3730,.F.); +#3779 = ORIENTED_EDGE('',*,*,#2712,.F.); +#3780 = ADVANCED_FACE('',(#3781),#2700,.F.); +#3781 = FACE_BOUND('',#3782,.F.); +#3782 = EDGE_LOOP('',(#3783,#3804,#3805,#3806)); +#3783 = ORIENTED_EDGE('',*,*,#3784,.T.); +#3784 = EDGE_CURVE('',#2657,#2910,#3785,.T.); +#3785 = SURFACE_CURVE('',#3786,(#3790,#3797),.PCURVE_S1.); +#3786 = LINE('',#3787,#3788); +#3787 = CARTESIAN_POINT('',(3.,4.015,0.2)); +#3788 = VECTOR('',#3789,1.); +#3789 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#3790 = PCURVE('',#2700,#3791); +#3791 = DEFINITIONAL_REPRESENTATION('',(#3792),#3796); +#3792 = LINE('',#3793,#3794); +#3793 = CARTESIAN_POINT('',(-0.,0.)); +#3794 = VECTOR('',#3795,1.); +#3795 = DIRECTION('',(0.,-1.)); +#3796 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3797 = PCURVE('',#2672,#3798); +#3798 = DEFINITIONAL_REPRESENTATION('',(#3799),#3803); +#3799 = LINE('',#3800,#3801); +#3800 = CARTESIAN_POINT('',(0.2,0.)); +#3801 = VECTOR('',#3802,1.); +#3802 = DIRECTION('',(0.,-1.)); +#3803 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3804 = ORIENTED_EDGE('',*,*,#2932,.T.); +#3805 = ORIENTED_EDGE('',*,*,#3757,.F.); +#3806 = ORIENTED_EDGE('',*,*,#2684,.F.); +#3807 = ADVANCED_FACE('',(#3808),#2672,.F.); +#3808 = FACE_BOUND('',#3809,.F.); +#3809 = EDGE_LOOP('',(#3810,#3831,#3832,#3833)); +#3810 = ORIENTED_EDGE('',*,*,#3811,.T.); +#3811 = EDGE_CURVE('',#2629,#2887,#3812,.T.); +#3812 = SURFACE_CURVE('',#3813,(#3817,#3824),.PCURVE_S1.); +#3813 = LINE('',#3814,#3815); +#3814 = CARTESIAN_POINT('',(3.,4.015,5.551115123126E-17)); +#3815 = VECTOR('',#3816,1.); +#3816 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#3817 = PCURVE('',#2672,#3818); +#3818 = DEFINITIONAL_REPRESENTATION('',(#3819),#3823); +#3819 = LINE('',#3820,#3821); +#3820 = CARTESIAN_POINT('',(0.,0.)); +#3821 = VECTOR('',#3822,1.); +#3822 = DIRECTION('',(0.,-1.)); +#3823 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3824 = PCURVE('',#2644,#3825); +#3825 = DEFINITIONAL_REPRESENTATION('',(#3826),#3830); +#3826 = LINE('',#3827,#3828); +#3827 = CARTESIAN_POINT('',(0.35,-7.771561172375E-17)); +#3828 = VECTOR('',#3829,1.); +#3829 = DIRECTION('',(0.,-1.)); +#3830 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3831 = ORIENTED_EDGE('',*,*,#2909,.T.); +#3832 = ORIENTED_EDGE('',*,*,#3784,.F.); +#3833 = ORIENTED_EDGE('',*,*,#2656,.F.); +#3834 = ADVANCED_FACE('',(#3835),#2644,.F.); +#3835 = FACE_BOUND('',#3836,.F.); +#3836 = EDGE_LOOP('',(#3837,#3838,#3839,#3840)); +#3837 = ORIENTED_EDGE('',*,*,#3520,.T.); +#3838 = ORIENTED_EDGE('',*,*,#2886,.T.); +#3839 = ORIENTED_EDGE('',*,*,#3811,.F.); +#3840 = ORIENTED_EDGE('',*,*,#2628,.F.); +#3841 = ADVANCED_FACE('',(#3842),#2847,.F.); +#3842 = FACE_BOUND('',#3843,.F.); +#3843 = EDGE_LOOP('',(#3844,#3845,#3846,#3874)); +#3844 = ORIENTED_EDGE('',*,*,#2831,.F.); +#3845 = ORIENTED_EDGE('',*,*,#3446,.T.); +#3846 = ORIENTED_EDGE('',*,*,#3847,.T.); +#3847 = EDGE_CURVE('',#3419,#3848,#3850,.T.); +#3848 = VERTEX_POINT('',#3849); +#3849 = CARTESIAN_POINT('',(1.95,2.745,1.025)); +#3850 = SURFACE_CURVE('',#3851,(#3855,#3862),.PCURVE_S1.); +#3851 = LINE('',#3852,#3853); +#3852 = CARTESIAN_POINT('',(1.95,2.745,0.778829828783)); +#3853 = VECTOR('',#3854,1.); +#3854 = DIRECTION('',(0.,0.,1.)); +#3855 = PCURVE('',#2847,#3856); +#3856 = DEFINITIONAL_REPRESENTATION('',(#3857),#3861); +#3857 = LINE('',#3858,#3859); +#3858 = CARTESIAN_POINT('',(1.43,-0.246170171217)); +#3859 = VECTOR('',#3860,1.); +#3860 = DIRECTION('',(0.,1.)); +#3861 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3862 = PCURVE('',#3863,#3868); +#3863 = PLANE('',#3864); +#3864 = AXIS2_PLACEMENT_3D('',#3865,#3866,#3867); +#3865 = CARTESIAN_POINT('',(2.41578967201,2.745,0.532659657565)); +#3866 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#3867 = DIRECTION('',(0.,0.,1.)); +#3868 = DEFINITIONAL_REPRESENTATION('',(#3869),#3873); +#3869 = LINE('',#3870,#3871); +#3870 = CARTESIAN_POINT('',(0.246170171218,0.46578967201)); +#3871 = VECTOR('',#3872,1.); +#3872 = DIRECTION('',(1.,0.)); +#3873 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3874 = ORIENTED_EDGE('',*,*,#3875,.F.); +#3875 = EDGE_CURVE('',#2832,#3848,#3876,.T.); +#3876 = SURFACE_CURVE('',#3877,(#3881,#3888),.PCURVE_S1.); +#3877 = LINE('',#3878,#3879); +#3878 = CARTESIAN_POINT('',(1.95,4.175,1.025)); +#3879 = VECTOR('',#3880,1.); +#3880 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#3881 = PCURVE('',#2847,#3882); +#3882 = DEFINITIONAL_REPRESENTATION('',(#3883),#3887); +#3883 = LINE('',#3884,#3885); +#3884 = CARTESIAN_POINT('',(0.,0.)); +#3885 = VECTOR('',#3886,1.); +#3886 = DIRECTION('',(1.,0.)); +#3887 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3888 = PCURVE('',#3641,#3889); +#3889 = DEFINITIONAL_REPRESENTATION('',(#3890),#3894); +#3890 = LINE('',#3891,#3892); +#3891 = CARTESIAN_POINT('',(2.22044604925E-16,-3.068881473967E-15)); +#3892 = VECTOR('',#3893,1.); +#3893 = DIRECTION('',(1.,1.789223446528E-15)); +#3894 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3895 = ADVANCED_FACE('',(#3896),#3071,.F.); +#3896 = FACE_BOUND('',#3897,.F.); +#3897 = EDGE_LOOP('',(#3898,#3927,#3954,#3981,#4008,#4028,#4029,#4051)); +#3898 = ORIENTED_EDGE('',*,*,#3899,.F.); +#3899 = EDGE_CURVE('',#3900,#3902,#3904,.T.); +#3900 = VERTEX_POINT('',#3901); +#3901 = CARTESIAN_POINT('',(-1.835171280765,4.117585640382,0.1)); +#3902 = VERTEX_POINT('',#3903); +#3903 = CARTESIAN_POINT('',(-1.717585640382,4.235171280765,0.1)); +#3904 = SURFACE_CURVE('',#3905,(#3909,#3916),.PCURVE_S1.); +#3905 = LINE('',#3906,#3907); +#3906 = CARTESIAN_POINT('',(-1.835171280765,4.117585640382,0.1)); +#3907 = VECTOR('',#3908,1.); +#3908 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#3909 = PCURVE('',#3071,#3910); +#3910 = DEFINITIONAL_REPRESENTATION('',(#3911),#3915); +#3911 = LINE('',#3912,#3913); +#3912 = CARTESIAN_POINT('',(6.477431586931E-02,-0.15315695757)); +#3913 = VECTOR('',#3914,1.); +#3914 = DIRECTION('',(-0.389523396298,0.921016570826)); +#3915 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3916 = PCURVE('',#3917,#3922); +#3917 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#3918,#3919) + ,(#3920,#3921 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#3918 = CARTESIAN_POINT('',(-1.835171280765,4.117585640382,0.1)); +#3919 = CARTESIAN_POINT('',(-1.95,4.175,0.825)); +#3920 = CARTESIAN_POINT('',(-1.717585640382,4.235171280765,0.1)); +#3921 = CARTESIAN_POINT('',(-1.775,4.35,0.825)); +#3922 = DEFINITIONAL_REPRESENTATION('',(#3923),#3926); +#3923 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3924,#3925),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,0.16629120737),.PIECEWISE_BEZIER_KNOTS.); +#3924 = CARTESIAN_POINT('',(7.708212170719E-16,2.90303552035E-17)); +#3925 = CARTESIAN_POINT('',(0.247487373415,9.979549707383E-17)); +#3926 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3927 = ORIENTED_EDGE('',*,*,#3928,.F.); +#3928 = EDGE_CURVE('',#3929,#3900,#3931,.T.); +#3929 = VERTEX_POINT('',#3930); +#3930 = CARTESIAN_POINT('',(-1.835171280765,-4.117585640382,0.1)); +#3931 = SURFACE_CURVE('',#3932,(#3936,#3943),.PCURVE_S1.); +#3932 = LINE('',#3933,#3934); +#3933 = CARTESIAN_POINT('',(-1.835171280765,-4.117585640382,0.1)); +#3934 = VECTOR('',#3935,1.); +#3935 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#3936 = PCURVE('',#3071,#3937); +#3937 = DEFINITIONAL_REPRESENTATION('',(#3938),#3942); +#3938 = LINE('',#3939,#3940); +#3939 = CARTESIAN_POINT('',(7.696239171465,-3.248119022174)); +#3940 = VECTOR('',#3941,1.); +#3941 = DIRECTION('',(-0.92669169777,0.375822427863)); +#3942 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3943 = PCURVE('',#3944,#3949); +#3944 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#3945,#3946) + ,(#3947,#3948 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,8.35),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#3945 = CARTESIAN_POINT('',(-1.835171280765,-4.117585640382,0.1)); +#3946 = CARTESIAN_POINT('',(-1.95,-4.175,0.825)); +#3947 = CARTESIAN_POINT('',(-1.835171280765,4.117585640382,0.1)); +#3948 = CARTESIAN_POINT('',(-1.95,4.175,0.825)); +#3949 = DEFINITIONAL_REPRESENTATION('',(#3950),#3953); +#3950 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3951,#3952),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,8.235171280764),.PIECEWISE_BEZIER_KNOTS.); +#3951 = CARTESIAN_POINT('',(-5.26757239086E-16,1.224928093993E-17)); +#3952 = CARTESIAN_POINT('',(8.35,3.656916022696E-16)); +#3953 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3954 = ORIENTED_EDGE('',*,*,#3955,.F.); +#3955 = EDGE_CURVE('',#3956,#3929,#3958,.T.); +#3956 = VERTEX_POINT('',#3957); +#3957 = CARTESIAN_POINT('',(-1.717585640382,-4.235171280765,0.1)); +#3958 = SURFACE_CURVE('',#3959,(#3963,#3970),.PCURVE_S1.); +#3959 = LINE('',#3960,#3961); +#3960 = CARTESIAN_POINT('',(-1.717585640382,-4.235171280765,0.1)); +#3961 = VECTOR('',#3962,1.); +#3962 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#3963 = PCURVE('',#3071,#3964); +#3964 = DEFINITIONAL_REPRESENTATION('',(#3965),#3969); +#3965 = LINE('',#3966,#3967); +#3966 = CARTESIAN_POINT('',(7.849396129035,-3.183344706304)); +#3967 = VECTOR('',#3968,1.); +#3968 = DIRECTION('',(-0.921016570826,-0.389523396298)); +#3969 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3970 = PCURVE('',#3971,#3976); +#3971 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#3972,#3973) + ,(#3974,#3975 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#3972 = CARTESIAN_POINT('',(-1.717585640382,-4.235171280765,0.1)); +#3973 = CARTESIAN_POINT('',(-1.775,-4.35,0.825)); +#3974 = CARTESIAN_POINT('',(-1.835171280765,-4.117585640382,0.1)); +#3975 = CARTESIAN_POINT('',(-1.95,-4.175,0.825)); +#3976 = DEFINITIONAL_REPRESENTATION('',(#3977),#3980); +#3977 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#3978,#3979),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,0.16629120737),.PIECEWISE_BEZIER_KNOTS.); +#3978 = CARTESIAN_POINT('',(-1.094764205587E-15,9.979549707346E-17)); +#3979 = CARTESIAN_POINT('',(0.247487373415,2.903035520387E-17)); +#3980 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3981 = ORIENTED_EDGE('',*,*,#3982,.F.); +#3982 = EDGE_CURVE('',#3983,#3956,#3985,.T.); +#3983 = VERTEX_POINT('',#3984); +#3984 = CARTESIAN_POINT('',(1.717585640382,-4.235171280765,0.1)); +#3985 = SURFACE_CURVE('',#3986,(#3990,#3997),.PCURVE_S1.); +#3986 = LINE('',#3987,#3988); +#3987 = CARTESIAN_POINT('',(1.717585640382,-4.235171280765,0.1)); +#3988 = VECTOR('',#3989,1.); +#3989 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#3990 = PCURVE('',#3071,#3991); +#3991 = DEFINITIONAL_REPRESENTATION('',(#3992),#3996); +#3992 = LINE('',#3993,#3994); +#3993 = CARTESIAN_POINT('',(9.140410539897,-3.570477247195E-12)); +#3994 = VECTOR('',#3995,1.); +#3995 = DIRECTION('',(-0.375822427863,-0.92669169777)); +#3996 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#3997 = PCURVE('',#3998,#4003); +#3998 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#3999,#4000) + ,(#4001,#4002 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.55),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#3999 = CARTESIAN_POINT('',(1.717585640382,-4.235171280765,0.1)); +#4000 = CARTESIAN_POINT('',(1.775,-4.35,0.825)); +#4001 = CARTESIAN_POINT('',(-1.717585640382,-4.235171280765,0.1)); +#4002 = CARTESIAN_POINT('',(-1.775,-4.35,0.825)); +#4003 = DEFINITIONAL_REPRESENTATION('',(#4004),#4007); +#4004 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4005,#4006),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,3.435171280764),.PIECEWISE_BEZIER_KNOTS.); +#4005 = CARTESIAN_POINT('',(2.879519048319E-16,-1.396298627236E-17)); +#4006 = CARTESIAN_POINT('',(3.55,2.525761680707E-16)); +#4007 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4008 = ORIENTED_EDGE('',*,*,#4009,.F.); +#4009 = EDGE_CURVE('',#3057,#3983,#4010,.T.); +#4010 = SURFACE_CURVE('',#4011,(#4015,#4022),.PCURVE_S1.); +#4011 = LINE('',#4012,#4013); +#4012 = CARTESIAN_POINT('',(1.835171280765,-4.117585640382,0.1)); +#4013 = VECTOR('',#4014,1.); +#4014 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#4015 = PCURVE('',#3071,#4016); +#4016 = DEFINITIONAL_REPRESENTATION('',(#4017),#4021); +#4017 = LINE('',#4018,#4019); +#4018 = CARTESIAN_POINT('',(9.075636224027,0.153156957567)); +#4019 = VECTOR('',#4020,1.); +#4020 = DIRECTION('',(0.389523396298,-0.921016570826)); +#4021 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4022 = PCURVE('',#3098,#4023); +#4023 = DEFINITIONAL_REPRESENTATION('',(#4024),#4027); +#4024 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4025,#4026),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,0.16629120737),.PIECEWISE_BEZIER_KNOTS.); +#4025 = CARTESIAN_POINT('',(7.708212170719E-16,2.90303552035E-17)); +#4026 = CARTESIAN_POINT('',(0.247487373415,9.979549707383E-17)); +#4027 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4028 = ORIENTED_EDGE('',*,*,#3054,.F.); +#4029 = ORIENTED_EDGE('',*,*,#4030,.F.); +#4030 = EDGE_CURVE('',#4031,#3055,#4033,.T.); +#4031 = VERTEX_POINT('',#4032); +#4032 = CARTESIAN_POINT('',(1.717585640382,4.235171280765,0.1)); +#4033 = SURFACE_CURVE('',#4034,(#4038,#4045),.PCURVE_S1.); +#4034 = LINE('',#4035,#4036); +#4035 = CARTESIAN_POINT('',(1.717585640382,4.235171280765,0.1)); +#4036 = VECTOR('',#4037,1.); +#4037 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#4038 = PCURVE('',#3071,#4039); +#4039 = DEFINITIONAL_REPRESENTATION('',(#4040),#4044); +#4040 = LINE('',#4041,#4042); +#4041 = CARTESIAN_POINT('',(1.291014410862,3.183344706301)); +#4042 = VECTOR('',#4043,1.); +#4043 = DIRECTION('',(0.921016570826,0.389523396298)); +#4044 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4045 = PCURVE('',#3504,#4046); +#4046 = DEFINITIONAL_REPRESENTATION('',(#4047),#4050); +#4047 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4048,#4049),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,0.16629120737),.PIECEWISE_BEZIER_KNOTS.); +#4048 = CARTESIAN_POINT('',(-1.094764205587E-15,9.979549707346E-17)); +#4049 = CARTESIAN_POINT('',(0.247487373415,2.903035520387E-17)); +#4050 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4051 = ORIENTED_EDGE('',*,*,#4052,.F.); +#4052 = EDGE_CURVE('',#3902,#4031,#4053,.T.); +#4053 = SURFACE_CURVE('',#4054,(#4058,#4065),.PCURVE_S1.); +#4054 = LINE('',#4055,#4056); +#4055 = CARTESIAN_POINT('',(-1.717585640382,4.235171280765,0.1)); +#4056 = VECTOR('',#4057,1.); +#4057 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#4058 = PCURVE('',#3071,#4059); +#4059 = DEFINITIONAL_REPRESENTATION('',(#4060),#4064); +#4060 = LINE('',#4061,#4062); +#4061 = CARTESIAN_POINT('',(0.,0.)); +#4062 = VECTOR('',#4063,1.); +#4063 = DIRECTION('',(0.375822427863,0.92669169777)); +#4064 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4065 = PCURVE('',#4066,#4071); +#4066 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#4067,#4068) + ,(#4069,#4070 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.55),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#4067 = CARTESIAN_POINT('',(-1.717585640382,4.235171280765,0.1)); +#4068 = CARTESIAN_POINT('',(-1.775,4.35,0.825)); +#4069 = CARTESIAN_POINT('',(1.717585640382,4.235171280765,0.1)); +#4070 = CARTESIAN_POINT('',(1.775,4.35,0.825)); +#4071 = DEFINITIONAL_REPRESENTATION('',(#4072),#4075); +#4072 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4073,#4074),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,3.435171280764),.PIECEWISE_BEZIER_KNOTS.); +#4073 = CARTESIAN_POINT('',(2.879519048319E-16,-1.396298627236E-17)); +#4074 = CARTESIAN_POINT('',(3.55,2.525761680707E-16)); +#4075 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4076 = ADVANCED_FACE('',(#4077),#3504,.F.); +#4077 = FACE_BOUND('',#4078,.F.); +#4078 = EDGE_LOOP('',(#4079,#4080,#4081,#4104)); +#4079 = ORIENTED_EDGE('',*,*,#4030,.T.); +#4080 = ORIENTED_EDGE('',*,*,#3491,.T.); +#4081 = ORIENTED_EDGE('',*,*,#4082,.F.); +#4082 = EDGE_CURVE('',#4083,#3469,#4085,.T.); +#4083 = VERTEX_POINT('',#4084); +#4084 = CARTESIAN_POINT('',(1.775,4.35,0.825)); +#4085 = SURFACE_CURVE('',#4086,(#4090,#4097),.PCURVE_S1.); +#4086 = LINE('',#4087,#4088); +#4087 = CARTESIAN_POINT('',(1.775,4.35,0.825)); +#4088 = VECTOR('',#4089,1.); +#4089 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#4090 = PCURVE('',#3504,#4091); +#4091 = DEFINITIONAL_REPRESENTATION('',(#4092),#4096); +#4092 = LINE('',#4093,#4094); +#4093 = CARTESIAN_POINT('',(5.623993954359E-17,1.)); +#4094 = VECTOR('',#4095,1.); +#4095 = DIRECTION('',(1.,0.)); +#4096 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4097 = PCURVE('',#3560,#4098); +#4098 = DEFINITIONAL_REPRESENTATION('',(#4099),#4103); +#4099 = LINE('',#4100,#4101); +#4100 = CARTESIAN_POINT('',(0.,-0.2)); +#4101 = VECTOR('',#4102,1.); +#4102 = DIRECTION('',(1.,0.)); +#4103 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4104 = ORIENTED_EDGE('',*,*,#4105,.F.); +#4105 = EDGE_CURVE('',#4031,#4083,#4106,.T.); +#4106 = SURFACE_CURVE('',#4107,(#4110,#4117),.PCURVE_S1.); +#4107 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4108,#4109),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#4108 = CARTESIAN_POINT('',(1.717585640382,4.235171280765,0.1)); +#4109 = CARTESIAN_POINT('',(1.775,4.35,0.825)); +#4110 = PCURVE('',#3504,#4111); +#4111 = DEFINITIONAL_REPRESENTATION('',(#4112),#4116); +#4112 = LINE('',#4113,#4114); +#4113 = CARTESIAN_POINT('',(-1.094764205587E-15,9.979549707346E-17)); +#4114 = VECTOR('',#4115,1.); +#4115 = DIRECTION('',(5.287130198624E-16,1.)); +#4116 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4117 = PCURVE('',#4066,#4118); +#4118 = DEFINITIONAL_REPRESENTATION('',(#4119),#4123); +#4119 = LINE('',#4120,#4121); +#4120 = CARTESIAN_POINT('',(3.55,-8.354401814696E-17)); +#4121 = VECTOR('',#4122,1.); +#4122 = DIRECTION('',(0.,1.)); +#4123 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4124 = ADVANCED_FACE('',(#4125),#3098,.F.); +#4125 = FACE_BOUND('',#4126,.F.); +#4126 = EDGE_LOOP('',(#4127,#4128,#4150,#4176)); +#4127 = ORIENTED_EDGE('',*,*,#4009,.T.); +#4128 = ORIENTED_EDGE('',*,*,#4129,.T.); +#4129 = EDGE_CURVE('',#3983,#4130,#4132,.T.); +#4130 = VERTEX_POINT('',#4131); +#4131 = CARTESIAN_POINT('',(1.775,-4.35,0.825)); +#4132 = SURFACE_CURVE('',#4133,(#4136,#4143),.PCURVE_S1.); +#4133 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4134,#4135),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#4134 = CARTESIAN_POINT('',(1.717585640382,-4.235171280765,0.1)); +#4135 = CARTESIAN_POINT('',(1.775,-4.35,0.825)); +#4136 = PCURVE('',#3098,#4137); +#4137 = DEFINITIONAL_REPRESENTATION('',(#4138),#4142); +#4138 = LINE('',#4139,#4140); +#4139 = CARTESIAN_POINT('',(0.247487373415,-8.266802507344E-17)); +#4140 = VECTOR('',#4141,1.); +#4141 = DIRECTION('',(1.387778780781E-16,1.)); +#4142 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4143 = PCURVE('',#3998,#4144); +#4144 = DEFINITIONAL_REPRESENTATION('',(#4145),#4149); +#4145 = LINE('',#4146,#4147); +#4146 = CARTESIAN_POINT('',(2.879519048319E-16,-1.396298627236E-17)); +#4147 = VECTOR('',#4148,1.); +#4148 = DIRECTION('',(-2.553306735619E-16,1.)); +#4149 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4150 = ORIENTED_EDGE('',*,*,#4151,.F.); +#4151 = EDGE_CURVE('',#3084,#4130,#4152,.T.); +#4152 = SURFACE_CURVE('',#4153,(#4157,#4164),.PCURVE_S1.); +#4153 = LINE('',#4154,#4155); +#4154 = CARTESIAN_POINT('',(1.95,-4.175,0.825)); +#4155 = VECTOR('',#4156,1.); +#4156 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#4157 = PCURVE('',#3098,#4158); +#4158 = DEFINITIONAL_REPRESENTATION('',(#4159),#4163); +#4159 = LINE('',#4160,#4161); +#4160 = CARTESIAN_POINT('',(-2.589527758623E-16,1.)); +#4161 = VECTOR('',#4162,1.); +#4162 = DIRECTION('',(1.,8.971956906775E-16)); +#4163 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4164 = PCURVE('',#4165,#4170); +#4165 = PLANE('',#4166); +#4166 = AXIS2_PLACEMENT_3D('',#4167,#4168,#4169); +#4167 = CARTESIAN_POINT('',(1.95,-4.175,1.025)); +#4168 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#4169 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#4170 = DEFINITIONAL_REPRESENTATION('',(#4171),#4175); +#4171 = LINE('',#4172,#4173); +#4172 = CARTESIAN_POINT('',(-0.,-0.2)); +#4173 = VECTOR('',#4174,1.); +#4174 = DIRECTION('',(1.,0.)); +#4175 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4176 = ORIENTED_EDGE('',*,*,#3083,.F.); +#4177 = ADVANCED_FACE('',(#4178),#3126,.F.); +#4178 = FACE_BOUND('',#4179,.F.); +#4179 = EDGE_LOOP('',(#4180,#4208,#4209,#4229)); +#4180 = ORIENTED_EDGE('',*,*,#4181,.F.); +#4181 = EDGE_CURVE('',#3111,#4182,#4184,.T.); +#4182 = VERTEX_POINT('',#4183); +#4183 = CARTESIAN_POINT('',(1.95,-4.015,1.025)); +#4184 = SURFACE_CURVE('',#4185,(#4189,#4196),.PCURVE_S1.); +#4185 = LINE('',#4186,#4187); +#4186 = CARTESIAN_POINT('',(1.95,-4.015,0.778829828783)); +#4187 = VECTOR('',#4188,1.); +#4188 = DIRECTION('',(0.,0.,1.)); +#4189 = PCURVE('',#3126,#4190); +#4190 = DEFINITIONAL_REPRESENTATION('',(#4191),#4195); +#4191 = LINE('',#4192,#4193); +#4192 = CARTESIAN_POINT('',(8.19,-0.246170171217)); +#4193 = VECTOR('',#4194,1.); +#4194 = DIRECTION('',(0.,1.)); +#4195 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4196 = PCURVE('',#4197,#4202); +#4197 = PLANE('',#4198); +#4198 = AXIS2_PLACEMENT_3D('',#4199,#4200,#4201); +#4199 = CARTESIAN_POINT('',(2.41578967201,-4.015,0.532659657565)); +#4200 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#4201 = DIRECTION('',(0.,0.,1.)); +#4202 = DEFINITIONAL_REPRESENTATION('',(#4203),#4207); +#4203 = LINE('',#4204,#4205); +#4204 = CARTESIAN_POINT('',(0.246170171218,0.46578967201)); +#4205 = VECTOR('',#4206,1.); +#4206 = DIRECTION('',(1.,0.)); +#4207 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4208 = ORIENTED_EDGE('',*,*,#3110,.T.); +#4209 = ORIENTED_EDGE('',*,*,#4210,.T.); +#4210 = EDGE_CURVE('',#3084,#4211,#4213,.T.); +#4211 = VERTEX_POINT('',#4212); +#4212 = CARTESIAN_POINT('',(1.95,-4.175,1.025)); +#4213 = SURFACE_CURVE('',#4214,(#4217,#4223),.PCURVE_S1.); +#4214 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4215,#4216),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#4215 = CARTESIAN_POINT('',(1.95,-4.175,0.825)); +#4216 = CARTESIAN_POINT('',(1.95,-4.175,1.025)); +#4217 = PCURVE('',#3126,#4218); +#4218 = DEFINITIONAL_REPRESENTATION('',(#4219),#4222); +#4219 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4220,#4221),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#4220 = CARTESIAN_POINT('',(8.35,-0.2)); +#4221 = CARTESIAN_POINT('',(8.35,0.)); +#4222 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4223 = PCURVE('',#4165,#4224); +#4224 = DEFINITIONAL_REPRESENTATION('',(#4225),#4228); +#4225 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#4226,#4227),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#4226 = CARTESIAN_POINT('',(0.,-0.2)); +#4227 = CARTESIAN_POINT('',(0.,0.)); +#4228 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4229 = ORIENTED_EDGE('',*,*,#4230,.F.); +#4230 = EDGE_CURVE('',#4182,#4211,#4231,.T.); +#4231 = SURFACE_CURVE('',#4232,(#4236,#4243),.PCURVE_S1.); +#4232 = LINE('',#4233,#4234); +#4233 = CARTESIAN_POINT('',(1.95,4.175,1.025)); +#4234 = VECTOR('',#4235,1.); +#4235 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#4236 = PCURVE('',#3126,#4237); +#4237 = DEFINITIONAL_REPRESENTATION('',(#4238),#4242); +#4238 = LINE('',#4239,#4240); +#4239 = CARTESIAN_POINT('',(0.,0.)); +#4240 = VECTOR('',#4241,1.); +#4241 = DIRECTION('',(1.,0.)); +#4242 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4243 = PCURVE('',#4244,#4249); +#4244 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#4245,#4246) + ,(#4247,#4248 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,8.35),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#4245 = CARTESIAN_POINT('',(1.95,4.175,1.025)); +#4246 = CARTESIAN_POINT('',(1.875,4.1375,1.025)); +#4247 = CARTESIAN_POINT('',(1.95,-4.175,1.025)); +#4248 = CARTESIAN_POINT('',(1.875,-4.1375,1.025)); +#4249 = DEFINITIONAL_REPRESENTATION('',(#4250),#4254); +#4250 = LINE('',#4251,#4252); +#4251 = CARTESIAN_POINT('',(0.,9.868171234865E-14)); +#4252 = VECTOR('',#4253,1.); +#4253 = DIRECTION('',(1.,-1.477897042681E-14)); +#4254 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4255 = ADVANCED_FACE('',(#4256),#3154,.F.); +#4256 = FACE_BOUND('',#4257,.F.); +#4257 = EDGE_LOOP('',(#4258,#4286,#4287,#4310)); +#4258 = ORIENTED_EDGE('',*,*,#4259,.F.); +#4259 = EDGE_CURVE('',#3139,#4260,#4262,.T.); +#4260 = VERTEX_POINT('',#4261); +#4261 = CARTESIAN_POINT('',(2.25,-3.605,0.825)); +#4262 = SURFACE_CURVE('',#4263,(#4267,#4274),.PCURVE_S1.); +#4263 = LINE('',#4264,#4265); +#4264 = CARTESIAN_POINT('',(1.8,-3.605,0.825)); +#4265 = VECTOR('',#4266,1.); +#4266 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#4267 = PCURVE('',#3154,#4268); +#4268 = DEFINITIONAL_REPRESENTATION('',(#4269),#4273); +#4269 = LINE('',#4270,#4271); +#4270 = CARTESIAN_POINT('',(0.,0.)); +#4271 = VECTOR('',#4272,1.); +#4272 = DIRECTION('',(1.,0.)); +#4273 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4274 = PCURVE('',#4275,#4280); +#4275 = PLANE('',#4276); +#4276 = AXIS2_PLACEMENT_3D('',#4277,#4278,#4279); +#4277 = CARTESIAN_POINT('',(2.41578967201,-3.605,0.532659657565)); +#4278 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#4279 = DIRECTION('',(0.,0.,1.)); +#4280 = DEFINITIONAL_REPRESENTATION('',(#4281),#4285); +#4281 = LINE('',#4282,#4283); +#4282 = CARTESIAN_POINT('',(0.292340342435,0.61578967201)); +#4283 = VECTOR('',#4284,1.); +#4284 = DIRECTION('',(0.,-1.)); +#4285 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4286 = ORIENTED_EDGE('',*,*,#3138,.T.); +#4287 = ORIENTED_EDGE('',*,*,#4288,.T.); +#4288 = EDGE_CURVE('',#3111,#4289,#4291,.T.); +#4289 = VERTEX_POINT('',#4290); +#4290 = CARTESIAN_POINT('',(2.25,-4.015,0.825)); +#4291 = SURFACE_CURVE('',#4292,(#4296,#4303),.PCURVE_S1.); +#4292 = LINE('',#4293,#4294); +#4293 = CARTESIAN_POINT('',(1.8,-4.015,0.825)); +#4294 = VECTOR('',#4295,1.); +#4295 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#4296 = PCURVE('',#3154,#4297); +#4297 = DEFINITIONAL_REPRESENTATION('',(#4298),#4302); +#4298 = LINE('',#4299,#4300); +#4299 = CARTESIAN_POINT('',(-9.103828801925E-17,-0.41)); +#4300 = VECTOR('',#4301,1.); +#4301 = DIRECTION('',(1.,0.)); +#4302 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4303 = PCURVE('',#4197,#4304); +#4304 = DEFINITIONAL_REPRESENTATION('',(#4305),#4309); +#4305 = LINE('',#4306,#4307); +#4306 = CARTESIAN_POINT('',(0.292340342435,0.61578967201)); +#4307 = VECTOR('',#4308,1.); +#4308 = DIRECTION('',(0.,-1.)); +#4309 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4310 = ORIENTED_EDGE('',*,*,#4311,.F.); +#4311 = EDGE_CURVE('',#4260,#4289,#4312,.T.); +#4312 = SURFACE_CURVE('',#4313,(#4317,#4324),.PCURVE_S1.); +#4313 = LINE('',#4314,#4315); +#4314 = CARTESIAN_POINT('',(2.25,-3.605,0.825)); +#4315 = VECTOR('',#4316,1.); +#4316 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#4317 = PCURVE('',#3154,#4318); +#4318 = DEFINITIONAL_REPRESENTATION('',(#4319),#4323); +#4319 = LINE('',#4320,#4321); +#4320 = CARTESIAN_POINT('',(0.45,-9.992007221625E-17)); +#4321 = VECTOR('',#4322,1.); +#4322 = DIRECTION('',(0.,-1.)); +#4323 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4324 = PCURVE('',#4325,#4330); +#4325 = CYLINDRICAL_SURFACE('',#4326,0.1); +#4326 = AXIS2_PLACEMENT_3D('',#4327,#4328,#4329); +#4327 = CARTESIAN_POINT('',(2.25,-3.605,0.725)); +#4328 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#4329 = DIRECTION('',(4.440892098501E-15,9.860761315262E-31,1.)); +#4330 = DEFINITIONAL_REPRESENTATION('',(#4331),#4335); +#4331 = LINE('',#4332,#4333); +#4332 = CARTESIAN_POINT('',(0.,0.)); +#4333 = VECTOR('',#4334,1.); +#4334 = DIRECTION('',(0.,-1.)); +#4335 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4336 = ADVANCED_FACE('',(#4337),#3182,.F.); +#4337 = FACE_BOUND('',#4338,.F.); +#4338 = EDGE_LOOP('',(#4339,#4367,#4368,#4391)); +#4339 = ORIENTED_EDGE('',*,*,#4340,.F.); +#4340 = EDGE_CURVE('',#3167,#4341,#4343,.T.); +#4341 = VERTEX_POINT('',#4342); +#4342 = CARTESIAN_POINT('',(1.95,-2.745,1.025)); +#4343 = SURFACE_CURVE('',#4344,(#4348,#4355),.PCURVE_S1.); +#4344 = LINE('',#4345,#4346); +#4345 = CARTESIAN_POINT('',(1.95,-2.745,0.778829828783)); +#4346 = VECTOR('',#4347,1.); +#4347 = DIRECTION('',(0.,0.,1.)); +#4348 = PCURVE('',#3182,#4349); +#4349 = DEFINITIONAL_REPRESENTATION('',(#4350),#4354); +#4350 = LINE('',#4351,#4352); +#4351 = CARTESIAN_POINT('',(6.92,-0.246170171217)); +#4352 = VECTOR('',#4353,1.); +#4353 = DIRECTION('',(0.,1.)); +#4354 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4355 = PCURVE('',#4356,#4361); +#4356 = PLANE('',#4357); +#4357 = AXIS2_PLACEMENT_3D('',#4358,#4359,#4360); +#4358 = CARTESIAN_POINT('',(2.41578967201,-2.745,0.532659657565)); +#4359 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#4360 = DIRECTION('',(0.,0.,1.)); +#4361 = DEFINITIONAL_REPRESENTATION('',(#4362),#4366); +#4362 = LINE('',#4363,#4364); +#4363 = CARTESIAN_POINT('',(0.246170171218,0.46578967201)); +#4364 = VECTOR('',#4365,1.); +#4365 = DIRECTION('',(1.,0.)); +#4366 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4367 = ORIENTED_EDGE('',*,*,#3166,.T.); +#4368 = ORIENTED_EDGE('',*,*,#4369,.T.); +#4369 = EDGE_CURVE('',#3139,#4370,#4372,.T.); +#4370 = VERTEX_POINT('',#4371); +#4371 = CARTESIAN_POINT('',(1.95,-3.605,1.025)); +#4372 = SURFACE_CURVE('',#4373,(#4377,#4384),.PCURVE_S1.); +#4373 = LINE('',#4374,#4375); +#4374 = CARTESIAN_POINT('',(1.95,-3.605,0.778829828783)); +#4375 = VECTOR('',#4376,1.); +#4376 = DIRECTION('',(0.,0.,1.)); +#4377 = PCURVE('',#3182,#4378); +#4378 = DEFINITIONAL_REPRESENTATION('',(#4379),#4383); +#4379 = LINE('',#4380,#4381); +#4380 = CARTESIAN_POINT('',(7.78,-0.246170171217)); +#4381 = VECTOR('',#4382,1.); +#4382 = DIRECTION('',(0.,1.)); +#4383 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4384 = PCURVE('',#4275,#4385); +#4385 = DEFINITIONAL_REPRESENTATION('',(#4386),#4390); +#4386 = LINE('',#4387,#4388); +#4387 = CARTESIAN_POINT('',(0.246170171218,0.46578967201)); +#4388 = VECTOR('',#4389,1.); +#4389 = DIRECTION('',(1.,0.)); +#4390 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4391 = ORIENTED_EDGE('',*,*,#4392,.F.); +#4392 = EDGE_CURVE('',#4341,#4370,#4393,.T.); +#4393 = SURFACE_CURVE('',#4394,(#4398,#4405),.PCURVE_S1.); +#4394 = LINE('',#4395,#4396); +#4395 = CARTESIAN_POINT('',(1.95,4.175,1.025)); +#4396 = VECTOR('',#4397,1.); +#4397 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#4398 = PCURVE('',#3182,#4399); +#4399 = DEFINITIONAL_REPRESENTATION('',(#4400),#4404); +#4400 = LINE('',#4401,#4402); +#4401 = CARTESIAN_POINT('',(0.,0.)); +#4402 = VECTOR('',#4403,1.); +#4403 = DIRECTION('',(1.,0.)); +#4404 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4405 = PCURVE('',#4406,#4411); +#4406 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#4407,#4408) + ,(#4409,#4410 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,8.35),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#4407 = CARTESIAN_POINT('',(1.95,4.175,1.025)); +#4408 = CARTESIAN_POINT('',(1.875,4.1375,1.025)); +#4409 = CARTESIAN_POINT('',(1.95,-4.175,1.025)); +#4410 = CARTESIAN_POINT('',(1.875,-4.1375,1.025)); +#4411 = DEFINITIONAL_REPRESENTATION('',(#4412),#4416); +#4412 = LINE('',#4413,#4414); +#4413 = CARTESIAN_POINT('',(0.,4.176875635101E-14)); +#4414 = VECTOR('',#4415,1.); +#4415 = DIRECTION('',(1.,-8.67634447324E-15)); +#4416 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4417 = ADVANCED_FACE('',(#4418),#3434,.F.); +#4418 = FACE_BOUND('',#4419,.F.); +#4419 = EDGE_LOOP('',(#4420,#4443,#4444,#4472)); +#4420 = ORIENTED_EDGE('',*,*,#4421,.F.); +#4421 = EDGE_CURVE('',#3419,#4422,#4424,.T.); +#4422 = VERTEX_POINT('',#4423); +#4423 = CARTESIAN_POINT('',(2.25,2.745,0.825)); +#4424 = SURFACE_CURVE('',#4425,(#4429,#4436),.PCURVE_S1.); +#4425 = LINE('',#4426,#4427); +#4426 = CARTESIAN_POINT('',(1.8,2.745,0.825)); +#4427 = VECTOR('',#4428,1.); +#4428 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#4429 = PCURVE('',#3434,#4430); +#4430 = DEFINITIONAL_REPRESENTATION('',(#4431),#4435); +#4431 = LINE('',#4432,#4433); +#4432 = CARTESIAN_POINT('',(0.,0.)); +#4433 = VECTOR('',#4434,1.); +#4434 = DIRECTION('',(1.,0.)); +#4435 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4436 = PCURVE('',#3863,#4437); +#4437 = DEFINITIONAL_REPRESENTATION('',(#4438),#4442); +#4438 = LINE('',#4439,#4440); +#4439 = CARTESIAN_POINT('',(0.292340342435,0.61578967201)); +#4440 = VECTOR('',#4441,1.); +#4441 = DIRECTION('',(0.,-1.)); +#4442 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4443 = ORIENTED_EDGE('',*,*,#3418,.T.); +#4444 = ORIENTED_EDGE('',*,*,#4445,.T.); +#4445 = EDGE_CURVE('',#3391,#4446,#4448,.T.); +#4446 = VERTEX_POINT('',#4447); +#4447 = CARTESIAN_POINT('',(2.25,2.335,0.825)); +#4448 = SURFACE_CURVE('',#4449,(#4453,#4460),.PCURVE_S1.); +#4449 = LINE('',#4450,#4451); +#4450 = CARTESIAN_POINT('',(1.8,2.335,0.825)); +#4451 = VECTOR('',#4452,1.); +#4452 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#4453 = PCURVE('',#3434,#4454); +#4454 = DEFINITIONAL_REPRESENTATION('',(#4455),#4459); +#4455 = LINE('',#4456,#4457); +#4456 = CARTESIAN_POINT('',(-9.103828801925E-17,-0.41)); +#4457 = VECTOR('',#4458,1.); +#4458 = DIRECTION('',(1.,0.)); +#4459 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4460 = PCURVE('',#4461,#4466); +#4461 = PLANE('',#4462); +#4462 = AXIS2_PLACEMENT_3D('',#4463,#4464,#4465); +#4463 = CARTESIAN_POINT('',(2.41578967201,2.335,0.532659657565)); +#4464 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#4465 = DIRECTION('',(0.,0.,1.)); +#4466 = DEFINITIONAL_REPRESENTATION('',(#4467),#4471); +#4467 = LINE('',#4468,#4469); +#4468 = CARTESIAN_POINT('',(0.292340342435,0.61578967201)); +#4469 = VECTOR('',#4470,1.); +#4470 = DIRECTION('',(0.,-1.)); +#4471 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4472 = ORIENTED_EDGE('',*,*,#4473,.F.); +#4473 = EDGE_CURVE('',#4422,#4446,#4474,.T.); +#4474 = SURFACE_CURVE('',#4475,(#4479,#4486),.PCURVE_S1.); +#4475 = LINE('',#4476,#4477); +#4476 = CARTESIAN_POINT('',(2.25,2.745,0.825)); +#4477 = VECTOR('',#4478,1.); +#4478 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#4479 = PCURVE('',#3434,#4480); +#4480 = DEFINITIONAL_REPRESENTATION('',(#4481),#4485); +#4481 = LINE('',#4482,#4483); +#4482 = CARTESIAN_POINT('',(0.45,-9.992007221625E-17)); +#4483 = VECTOR('',#4484,1.); +#4484 = DIRECTION('',(0.,-1.)); +#4485 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4486 = PCURVE('',#4487,#4492); +#4487 = CYLINDRICAL_SURFACE('',#4488,0.1); +#4488 = AXIS2_PLACEMENT_3D('',#4489,#4490,#4491); +#4489 = CARTESIAN_POINT('',(2.25,2.745,0.725)); +#4490 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#4491 = DIRECTION('',(4.440892098501E-15,9.860761315262E-31,1.)); +#4492 = DEFINITIONAL_REPRESENTATION('',(#4493),#4497); +#4493 = LINE('',#4494,#4495); +#4494 = CARTESIAN_POINT('',(0.,0.)); +#4495 = VECTOR('',#4496,1.); +#4496 = DIRECTION('',(0.,-1.)); +#4497 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4498 = ADVANCED_FACE('',(#4499),#3210,.F.); +#4499 = FACE_BOUND('',#4500,.F.); +#4500 = EDGE_LOOP('',(#4501,#4529,#4530,#4553)); +#4501 = ORIENTED_EDGE('',*,*,#4502,.F.); +#4502 = EDGE_CURVE('',#3195,#4503,#4505,.T.); +#4503 = VERTEX_POINT('',#4504); +#4504 = CARTESIAN_POINT('',(2.25,-2.335,0.825)); +#4505 = SURFACE_CURVE('',#4506,(#4510,#4517),.PCURVE_S1.); +#4506 = LINE('',#4507,#4508); +#4507 = CARTESIAN_POINT('',(1.8,-2.335,0.825)); +#4508 = VECTOR('',#4509,1.); +#4509 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#4510 = PCURVE('',#3210,#4511); +#4511 = DEFINITIONAL_REPRESENTATION('',(#4512),#4516); +#4512 = LINE('',#4513,#4514); +#4513 = CARTESIAN_POINT('',(0.,0.)); +#4514 = VECTOR('',#4515,1.); +#4515 = DIRECTION('',(1.,0.)); +#4516 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4517 = PCURVE('',#4518,#4523); +#4518 = PLANE('',#4519); +#4519 = AXIS2_PLACEMENT_3D('',#4520,#4521,#4522); +#4520 = CARTESIAN_POINT('',(2.41578967201,-2.335,0.532659657565)); +#4521 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#4522 = DIRECTION('',(0.,0.,1.)); +#4523 = DEFINITIONAL_REPRESENTATION('',(#4524),#4528); +#4524 = LINE('',#4525,#4526); +#4525 = CARTESIAN_POINT('',(0.292340342435,0.61578967201)); +#4526 = VECTOR('',#4527,1.); +#4527 = DIRECTION('',(0.,-1.)); +#4528 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4529 = ORIENTED_EDGE('',*,*,#3194,.T.); +#4530 = ORIENTED_EDGE('',*,*,#4531,.T.); +#4531 = EDGE_CURVE('',#3167,#4532,#4534,.T.); +#4532 = VERTEX_POINT('',#4533); +#4533 = CARTESIAN_POINT('',(2.25,-2.745,0.825)); +#4534 = SURFACE_CURVE('',#4535,(#4539,#4546),.PCURVE_S1.); +#4535 = LINE('',#4536,#4537); +#4536 = CARTESIAN_POINT('',(1.8,-2.745,0.825)); +#4537 = VECTOR('',#4538,1.); +#4538 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#4539 = PCURVE('',#3210,#4540); +#4540 = DEFINITIONAL_REPRESENTATION('',(#4541),#4545); +#4541 = LINE('',#4542,#4543); +#4542 = CARTESIAN_POINT('',(-9.103828801925E-17,-0.41)); +#4543 = VECTOR('',#4544,1.); +#4544 = DIRECTION('',(1.,0.)); +#4545 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4546 = PCURVE('',#4356,#4547); +#4547 = DEFINITIONAL_REPRESENTATION('',(#4548),#4552); +#4548 = LINE('',#4549,#4550); +#4549 = CARTESIAN_POINT('',(0.292340342435,0.61578967201)); +#4550 = VECTOR('',#4551,1.); +#4551 = DIRECTION('',(0.,-1.)); +#4552 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4553 = ORIENTED_EDGE('',*,*,#4554,.F.); +#4554 = EDGE_CURVE('',#4503,#4532,#4555,.T.); +#4555 = SURFACE_CURVE('',#4556,(#4560,#4567),.PCURVE_S1.); +#4556 = LINE('',#4557,#4558); +#4557 = CARTESIAN_POINT('',(2.25,-2.335,0.825)); +#4558 = VECTOR('',#4559,1.); +#4559 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#4560 = PCURVE('',#3210,#4561); +#4561 = DEFINITIONAL_REPRESENTATION('',(#4562),#4566); +#4562 = LINE('',#4563,#4564); +#4563 = CARTESIAN_POINT('',(0.45,-9.992007221625E-17)); +#4564 = VECTOR('',#4565,1.); +#4565 = DIRECTION('',(0.,-1.)); +#4566 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4567 = PCURVE('',#4568,#4573); +#4568 = CYLINDRICAL_SURFACE('',#4569,0.1); +#4569 = AXIS2_PLACEMENT_3D('',#4570,#4571,#4572); +#4570 = CARTESIAN_POINT('',(2.25,-2.335,0.725)); +#4571 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#4572 = DIRECTION('',(4.440892098501E-15,9.860761315262E-31,1.)); +#4573 = DEFINITIONAL_REPRESENTATION('',(#4574),#4578); +#4574 = LINE('',#4575,#4576); +#4575 = CARTESIAN_POINT('',(0.,0.)); +#4576 = VECTOR('',#4577,1.); +#4577 = DIRECTION('',(0.,-1.)); +#4578 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4579 = ADVANCED_FACE('',(#4580),#3406,.F.); +#4580 = FACE_BOUND('',#4581,.F.); +#4581 = EDGE_LOOP('',(#4582,#4605,#4606,#4634)); +#4582 = ORIENTED_EDGE('',*,*,#4583,.F.); +#4583 = EDGE_CURVE('',#3391,#4584,#4586,.T.); +#4584 = VERTEX_POINT('',#4585); +#4585 = CARTESIAN_POINT('',(1.95,2.335,1.025)); +#4586 = SURFACE_CURVE('',#4587,(#4591,#4598),.PCURVE_S1.); +#4587 = LINE('',#4588,#4589); +#4588 = CARTESIAN_POINT('',(1.95,2.335,0.778829828783)); +#4589 = VECTOR('',#4590,1.); +#4590 = DIRECTION('',(0.,0.,1.)); +#4591 = PCURVE('',#3406,#4592); +#4592 = DEFINITIONAL_REPRESENTATION('',(#4593),#4597); +#4593 = LINE('',#4594,#4595); +#4594 = CARTESIAN_POINT('',(1.84,-0.246170171217)); +#4595 = VECTOR('',#4596,1.); +#4596 = DIRECTION('',(0.,1.)); +#4597 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4598 = PCURVE('',#4461,#4599); +#4599 = DEFINITIONAL_REPRESENTATION('',(#4600),#4604); +#4600 = LINE('',#4601,#4602); +#4601 = CARTESIAN_POINT('',(0.246170171218,0.46578967201)); +#4602 = VECTOR('',#4603,1.); +#4603 = DIRECTION('',(1.,0.)); +#4604 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4605 = ORIENTED_EDGE('',*,*,#3390,.T.); +#4606 = ORIENTED_EDGE('',*,*,#4607,.T.); +#4607 = EDGE_CURVE('',#3363,#4608,#4610,.T.); +#4608 = VERTEX_POINT('',#4609); +#4609 = CARTESIAN_POINT('',(1.95,1.475,1.025)); +#4610 = SURFACE_CURVE('',#4611,(#4615,#4622),.PCURVE_S1.); +#4611 = LINE('',#4612,#4613); +#4612 = CARTESIAN_POINT('',(1.95,1.475,0.778829828783)); +#4613 = VECTOR('',#4614,1.); +#4614 = DIRECTION('',(0.,0.,1.)); +#4615 = PCURVE('',#3406,#4616); +#4616 = DEFINITIONAL_REPRESENTATION('',(#4617),#4621); +#4617 = LINE('',#4618,#4619); +#4618 = CARTESIAN_POINT('',(2.7,-0.246170171217)); +#4619 = VECTOR('',#4620,1.); +#4620 = DIRECTION('',(0.,1.)); +#4621 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4622 = PCURVE('',#4623,#4628); +#4623 = PLANE('',#4624); +#4624 = AXIS2_PLACEMENT_3D('',#4625,#4626,#4627); +#4625 = CARTESIAN_POINT('',(2.41578967201,1.475,0.532659657565)); +#4626 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#4627 = DIRECTION('',(0.,0.,1.)); +#4628 = DEFINITIONAL_REPRESENTATION('',(#4629),#4633); +#4629 = LINE('',#4630,#4631); +#4630 = CARTESIAN_POINT('',(0.246170171218,0.46578967201)); +#4631 = VECTOR('',#4632,1.); +#4632 = DIRECTION('',(1.,0.)); +#4633 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4634 = ORIENTED_EDGE('',*,*,#4635,.F.); +#4635 = EDGE_CURVE('',#4584,#4608,#4636,.T.); +#4636 = SURFACE_CURVE('',#4637,(#4641,#4648),.PCURVE_S1.); +#4637 = LINE('',#4638,#4639); +#4638 = CARTESIAN_POINT('',(1.95,4.175,1.025)); +#4639 = VECTOR('',#4640,1.); +#4640 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#4641 = PCURVE('',#3406,#4642); +#4642 = DEFINITIONAL_REPRESENTATION('',(#4643),#4647); +#4643 = LINE('',#4644,#4645); +#4644 = CARTESIAN_POINT('',(0.,0.)); +#4645 = VECTOR('',#4646,1.); +#4646 = DIRECTION('',(1.,0.)); +#4647 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4648 = PCURVE('',#4649,#4654); +#4649 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#4650,#4651) + ,(#4652,#4653 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,8.35),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#4650 = CARTESIAN_POINT('',(1.95,4.175,1.025)); +#4651 = CARTESIAN_POINT('',(1.875,4.1375,1.025)); +#4652 = CARTESIAN_POINT('',(1.95,-4.175,1.025)); +#4653 = CARTESIAN_POINT('',(1.875,-4.1375,1.025)); +#4654 = DEFINITIONAL_REPRESENTATION('',(#4655),#4659); +#4655 = LINE('',#4656,#4657); +#4656 = CARTESIAN_POINT('',(0.,-2.63248575826E-15)); +#4657 = VECTOR('',#4658,1.); +#4658 = DIRECTION('',(1.,-1.680960070664E-15)); +#4659 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4660 = ADVANCED_FACE('',(#4661),#3238,.F.); +#4661 = FACE_BOUND('',#4662,.F.); +#4662 = EDGE_LOOP('',(#4663,#4691,#4692,#4715)); +#4663 = ORIENTED_EDGE('',*,*,#4664,.F.); +#4664 = EDGE_CURVE('',#3223,#4665,#4667,.T.); +#4665 = VERTEX_POINT('',#4666); +#4666 = CARTESIAN_POINT('',(1.95,-1.475,1.025)); +#4667 = SURFACE_CURVE('',#4668,(#4672,#4679),.PCURVE_S1.); +#4668 = LINE('',#4669,#4670); +#4669 = CARTESIAN_POINT('',(1.95,-1.475,0.778829828783)); +#4670 = VECTOR('',#4671,1.); +#4671 = DIRECTION('',(0.,0.,1.)); +#4672 = PCURVE('',#3238,#4673); +#4673 = DEFINITIONAL_REPRESENTATION('',(#4674),#4678); +#4674 = LINE('',#4675,#4676); +#4675 = CARTESIAN_POINT('',(5.65,-0.246170171217)); +#4676 = VECTOR('',#4677,1.); +#4677 = DIRECTION('',(0.,1.)); +#4678 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4679 = PCURVE('',#4680,#4685); +#4680 = PLANE('',#4681); +#4681 = AXIS2_PLACEMENT_3D('',#4682,#4683,#4684); +#4682 = CARTESIAN_POINT('',(2.41578967201,-1.475,0.532659657565)); +#4683 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#4684 = DIRECTION('',(0.,0.,1.)); +#4685 = DEFINITIONAL_REPRESENTATION('',(#4686),#4690); +#4686 = LINE('',#4687,#4688); +#4687 = CARTESIAN_POINT('',(0.246170171218,0.46578967201)); +#4688 = VECTOR('',#4689,1.); +#4689 = DIRECTION('',(1.,0.)); +#4690 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4691 = ORIENTED_EDGE('',*,*,#3222,.T.); +#4692 = ORIENTED_EDGE('',*,*,#4693,.T.); +#4693 = EDGE_CURVE('',#3195,#4694,#4696,.T.); +#4694 = VERTEX_POINT('',#4695); +#4695 = CARTESIAN_POINT('',(1.95,-2.335,1.025)); +#4696 = SURFACE_CURVE('',#4697,(#4701,#4708),.PCURVE_S1.); +#4697 = LINE('',#4698,#4699); +#4698 = CARTESIAN_POINT('',(1.95,-2.335,0.778829828783)); +#4699 = VECTOR('',#4700,1.); +#4700 = DIRECTION('',(0.,0.,1.)); +#4701 = PCURVE('',#3238,#4702); +#4702 = DEFINITIONAL_REPRESENTATION('',(#4703),#4707); +#4703 = LINE('',#4704,#4705); +#4704 = CARTESIAN_POINT('',(6.51,-0.246170171217)); +#4705 = VECTOR('',#4706,1.); +#4706 = DIRECTION('',(0.,1.)); +#4707 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4708 = PCURVE('',#4518,#4709); +#4709 = DEFINITIONAL_REPRESENTATION('',(#4710),#4714); +#4710 = LINE('',#4711,#4712); +#4711 = CARTESIAN_POINT('',(0.246170171218,0.46578967201)); +#4712 = VECTOR('',#4713,1.); +#4713 = DIRECTION('',(1.,0.)); +#4714 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4715 = ORIENTED_EDGE('',*,*,#4716,.F.); +#4716 = EDGE_CURVE('',#4665,#4694,#4717,.T.); +#4717 = SURFACE_CURVE('',#4718,(#4722,#4729),.PCURVE_S1.); +#4718 = LINE('',#4719,#4720); +#4719 = CARTESIAN_POINT('',(1.95,4.175,1.025)); +#4720 = VECTOR('',#4721,1.); +#4721 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#4722 = PCURVE('',#3238,#4723); +#4723 = DEFINITIONAL_REPRESENTATION('',(#4724),#4728); +#4724 = LINE('',#4725,#4726); +#4725 = CARTESIAN_POINT('',(0.,0.)); +#4726 = VECTOR('',#4727,1.); +#4727 = DIRECTION('',(1.,0.)); +#4728 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4729 = PCURVE('',#4730,#4735); +#4730 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#4731,#4732) + ,(#4733,#4734 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,8.35),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#4731 = CARTESIAN_POINT('',(1.95,4.175,1.025)); +#4732 = CARTESIAN_POINT('',(1.875,4.1375,1.025)); +#4733 = CARTESIAN_POINT('',(1.95,-4.175,1.025)); +#4734 = CARTESIAN_POINT('',(1.875,-4.1375,1.025)); +#4735 = DEFINITIONAL_REPRESENTATION('',(#4736),#4740); +#4736 = LINE('',#4737,#4738); +#4737 = CARTESIAN_POINT('',(0.,1.334468818682E-14)); +#4738 = VECTOR('',#4739,1.); +#4739 = DIRECTION('',(1.,-5.202799219453E-15)); +#4740 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4741 = ADVANCED_FACE('',(#4742),#3378,.F.); +#4742 = FACE_BOUND('',#4743,.F.); +#4743 = EDGE_LOOP('',(#4744,#4767,#4768,#4796)); +#4744 = ORIENTED_EDGE('',*,*,#4745,.F.); +#4745 = EDGE_CURVE('',#3363,#4746,#4748,.T.); +#4746 = VERTEX_POINT('',#4747); +#4747 = CARTESIAN_POINT('',(2.25,1.475,0.825)); +#4748 = SURFACE_CURVE('',#4749,(#4753,#4760),.PCURVE_S1.); +#4749 = LINE('',#4750,#4751); +#4750 = CARTESIAN_POINT('',(1.8,1.475,0.825)); +#4751 = VECTOR('',#4752,1.); +#4752 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#4753 = PCURVE('',#3378,#4754); +#4754 = DEFINITIONAL_REPRESENTATION('',(#4755),#4759); +#4755 = LINE('',#4756,#4757); +#4756 = CARTESIAN_POINT('',(0.,0.)); +#4757 = VECTOR('',#4758,1.); +#4758 = DIRECTION('',(1.,0.)); +#4759 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4760 = PCURVE('',#4623,#4761); +#4761 = DEFINITIONAL_REPRESENTATION('',(#4762),#4766); +#4762 = LINE('',#4763,#4764); +#4763 = CARTESIAN_POINT('',(0.292340342435,0.61578967201)); +#4764 = VECTOR('',#4765,1.); +#4765 = DIRECTION('',(0.,-1.)); +#4766 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4767 = ORIENTED_EDGE('',*,*,#3362,.T.); +#4768 = ORIENTED_EDGE('',*,*,#4769,.T.); +#4769 = EDGE_CURVE('',#3335,#4770,#4772,.T.); +#4770 = VERTEX_POINT('',#4771); +#4771 = CARTESIAN_POINT('',(2.25,1.065,0.825)); +#4772 = SURFACE_CURVE('',#4773,(#4777,#4784),.PCURVE_S1.); +#4773 = LINE('',#4774,#4775); +#4774 = CARTESIAN_POINT('',(1.8,1.065,0.825)); +#4775 = VECTOR('',#4776,1.); +#4776 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#4777 = PCURVE('',#3378,#4778); +#4778 = DEFINITIONAL_REPRESENTATION('',(#4779),#4783); +#4779 = LINE('',#4780,#4781); +#4780 = CARTESIAN_POINT('',(-9.103828801925E-17,-0.41)); +#4781 = VECTOR('',#4782,1.); +#4782 = DIRECTION('',(1.,0.)); +#4783 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4784 = PCURVE('',#4785,#4790); +#4785 = PLANE('',#4786); +#4786 = AXIS2_PLACEMENT_3D('',#4787,#4788,#4789); +#4787 = CARTESIAN_POINT('',(2.41578967201,1.065,0.532659657565)); +#4788 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#4789 = DIRECTION('',(0.,0.,1.)); +#4790 = DEFINITIONAL_REPRESENTATION('',(#4791),#4795); +#4791 = LINE('',#4792,#4793); +#4792 = CARTESIAN_POINT('',(0.292340342435,0.61578967201)); +#4793 = VECTOR('',#4794,1.); +#4794 = DIRECTION('',(0.,-1.)); +#4795 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4796 = ORIENTED_EDGE('',*,*,#4797,.F.); +#4797 = EDGE_CURVE('',#4746,#4770,#4798,.T.); +#4798 = SURFACE_CURVE('',#4799,(#4803,#4810),.PCURVE_S1.); +#4799 = LINE('',#4800,#4801); +#4800 = CARTESIAN_POINT('',(2.25,1.475,0.825)); +#4801 = VECTOR('',#4802,1.); +#4802 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#4803 = PCURVE('',#3378,#4804); +#4804 = DEFINITIONAL_REPRESENTATION('',(#4805),#4809); +#4805 = LINE('',#4806,#4807); +#4806 = CARTESIAN_POINT('',(0.45,-9.992007221625E-17)); +#4807 = VECTOR('',#4808,1.); +#4808 = DIRECTION('',(0.,-1.)); +#4809 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4810 = PCURVE('',#4811,#4816); +#4811 = CYLINDRICAL_SURFACE('',#4812,0.1); +#4812 = AXIS2_PLACEMENT_3D('',#4813,#4814,#4815); +#4813 = CARTESIAN_POINT('',(2.25,1.475,0.725)); +#4814 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#4815 = DIRECTION('',(4.440892098501E-15,9.860761315262E-31,1.)); +#4816 = DEFINITIONAL_REPRESENTATION('',(#4817),#4821); +#4817 = LINE('',#4818,#4819); +#4818 = CARTESIAN_POINT('',(0.,0.)); +#4819 = VECTOR('',#4820,1.); +#4820 = DIRECTION('',(0.,-1.)); +#4821 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4822 = ADVANCED_FACE('',(#4823),#3266,.F.); +#4823 = FACE_BOUND('',#4824,.F.); +#4824 = EDGE_LOOP('',(#4825,#4853,#4854,#4877)); +#4825 = ORIENTED_EDGE('',*,*,#4826,.F.); +#4826 = EDGE_CURVE('',#3251,#4827,#4829,.T.); +#4827 = VERTEX_POINT('',#4828); +#4828 = CARTESIAN_POINT('',(2.25,-1.065,0.825)); +#4829 = SURFACE_CURVE('',#4830,(#4834,#4841),.PCURVE_S1.); +#4830 = LINE('',#4831,#4832); +#4831 = CARTESIAN_POINT('',(1.8,-1.065,0.825)); +#4832 = VECTOR('',#4833,1.); +#4833 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#4834 = PCURVE('',#3266,#4835); +#4835 = DEFINITIONAL_REPRESENTATION('',(#4836),#4840); +#4836 = LINE('',#4837,#4838); +#4837 = CARTESIAN_POINT('',(0.,0.)); +#4838 = VECTOR('',#4839,1.); +#4839 = DIRECTION('',(1.,0.)); +#4840 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4841 = PCURVE('',#4842,#4847); +#4842 = PLANE('',#4843); +#4843 = AXIS2_PLACEMENT_3D('',#4844,#4845,#4846); +#4844 = CARTESIAN_POINT('',(2.41578967201,-1.065,0.532659657565)); +#4845 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#4846 = DIRECTION('',(0.,0.,1.)); +#4847 = DEFINITIONAL_REPRESENTATION('',(#4848),#4852); +#4848 = LINE('',#4849,#4850); +#4849 = CARTESIAN_POINT('',(0.292340342435,0.61578967201)); +#4850 = VECTOR('',#4851,1.); +#4851 = DIRECTION('',(0.,-1.)); +#4852 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4853 = ORIENTED_EDGE('',*,*,#3250,.T.); +#4854 = ORIENTED_EDGE('',*,*,#4855,.T.); +#4855 = EDGE_CURVE('',#3223,#4856,#4858,.T.); +#4856 = VERTEX_POINT('',#4857); +#4857 = CARTESIAN_POINT('',(2.25,-1.475,0.825)); +#4858 = SURFACE_CURVE('',#4859,(#4863,#4870),.PCURVE_S1.); +#4859 = LINE('',#4860,#4861); +#4860 = CARTESIAN_POINT('',(1.8,-1.475,0.825)); +#4861 = VECTOR('',#4862,1.); +#4862 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#4863 = PCURVE('',#3266,#4864); +#4864 = DEFINITIONAL_REPRESENTATION('',(#4865),#4869); +#4865 = LINE('',#4866,#4867); +#4866 = CARTESIAN_POINT('',(-9.103828801925E-17,-0.41)); +#4867 = VECTOR('',#4868,1.); +#4868 = DIRECTION('',(1.,0.)); +#4869 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4870 = PCURVE('',#4680,#4871); +#4871 = DEFINITIONAL_REPRESENTATION('',(#4872),#4876); +#4872 = LINE('',#4873,#4874); +#4873 = CARTESIAN_POINT('',(0.292340342435,0.61578967201)); +#4874 = VECTOR('',#4875,1.); +#4875 = DIRECTION('',(0.,-1.)); +#4876 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4877 = ORIENTED_EDGE('',*,*,#4878,.F.); +#4878 = EDGE_CURVE('',#4827,#4856,#4879,.T.); +#4879 = SURFACE_CURVE('',#4880,(#4884,#4891),.PCURVE_S1.); +#4880 = LINE('',#4881,#4882); +#4881 = CARTESIAN_POINT('',(2.25,-1.065,0.825)); +#4882 = VECTOR('',#4883,1.); +#4883 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#4884 = PCURVE('',#3266,#4885); +#4885 = DEFINITIONAL_REPRESENTATION('',(#4886),#4890); +#4886 = LINE('',#4887,#4888); +#4887 = CARTESIAN_POINT('',(0.45,-9.992007221625E-17)); +#4888 = VECTOR('',#4889,1.); +#4889 = DIRECTION('',(0.,-1.)); +#4890 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4891 = PCURVE('',#4892,#4897); +#4892 = CYLINDRICAL_SURFACE('',#4893,0.1); +#4893 = AXIS2_PLACEMENT_3D('',#4894,#4895,#4896); +#4894 = CARTESIAN_POINT('',(2.25,-1.065,0.725)); +#4895 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#4896 = DIRECTION('',(4.440892098501E-15,9.860761315262E-31,1.)); +#4897 = DEFINITIONAL_REPRESENTATION('',(#4898),#4902); +#4898 = LINE('',#4899,#4900); +#4899 = CARTESIAN_POINT('',(0.,0.)); +#4900 = VECTOR('',#4901,1.); +#4901 = DIRECTION('',(0.,-1.)); +#4902 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4903 = ADVANCED_FACE('',(#4904),#3350,.F.); +#4904 = FACE_BOUND('',#4905,.F.); +#4905 = EDGE_LOOP('',(#4906,#4929,#4930,#4958)); +#4906 = ORIENTED_EDGE('',*,*,#4907,.F.); +#4907 = EDGE_CURVE('',#3335,#4908,#4910,.T.); +#4908 = VERTEX_POINT('',#4909); +#4909 = CARTESIAN_POINT('',(1.95,1.065,1.025)); +#4910 = SURFACE_CURVE('',#4911,(#4915,#4922),.PCURVE_S1.); +#4911 = LINE('',#4912,#4913); +#4912 = CARTESIAN_POINT('',(1.95,1.065,0.778829828783)); +#4913 = VECTOR('',#4914,1.); +#4914 = DIRECTION('',(0.,0.,1.)); +#4915 = PCURVE('',#3350,#4916); +#4916 = DEFINITIONAL_REPRESENTATION('',(#4917),#4921); +#4917 = LINE('',#4918,#4919); +#4918 = CARTESIAN_POINT('',(3.11,-0.246170171217)); +#4919 = VECTOR('',#4920,1.); +#4920 = DIRECTION('',(0.,1.)); +#4921 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4922 = PCURVE('',#4785,#4923); +#4923 = DEFINITIONAL_REPRESENTATION('',(#4924),#4928); +#4924 = LINE('',#4925,#4926); +#4925 = CARTESIAN_POINT('',(0.246170171218,0.46578967201)); +#4926 = VECTOR('',#4927,1.); +#4927 = DIRECTION('',(1.,0.)); +#4928 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4929 = ORIENTED_EDGE('',*,*,#3334,.T.); +#4930 = ORIENTED_EDGE('',*,*,#4931,.T.); +#4931 = EDGE_CURVE('',#3307,#4932,#4934,.T.); +#4932 = VERTEX_POINT('',#4933); +#4933 = CARTESIAN_POINT('',(1.95,0.205,1.025)); +#4934 = SURFACE_CURVE('',#4935,(#4939,#4946),.PCURVE_S1.); +#4935 = LINE('',#4936,#4937); +#4936 = CARTESIAN_POINT('',(1.95,0.205,0.778829828783)); +#4937 = VECTOR('',#4938,1.); +#4938 = DIRECTION('',(0.,0.,1.)); +#4939 = PCURVE('',#3350,#4940); +#4940 = DEFINITIONAL_REPRESENTATION('',(#4941),#4945); +#4941 = LINE('',#4942,#4943); +#4942 = CARTESIAN_POINT('',(3.97,-0.246170171217)); +#4943 = VECTOR('',#4944,1.); +#4944 = DIRECTION('',(0.,1.)); +#4945 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4946 = PCURVE('',#4947,#4952); +#4947 = PLANE('',#4948); +#4948 = AXIS2_PLACEMENT_3D('',#4949,#4950,#4951); +#4949 = CARTESIAN_POINT('',(2.41578967201,0.205,0.532659657565)); +#4950 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#4951 = DIRECTION('',(0.,0.,1.)); +#4952 = DEFINITIONAL_REPRESENTATION('',(#4953),#4957); +#4953 = LINE('',#4954,#4955); +#4954 = CARTESIAN_POINT('',(0.246170171218,0.46578967201)); +#4955 = VECTOR('',#4956,1.); +#4956 = DIRECTION('',(1.,0.)); +#4957 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4958 = ORIENTED_EDGE('',*,*,#4959,.F.); +#4959 = EDGE_CURVE('',#4908,#4932,#4960,.T.); +#4960 = SURFACE_CURVE('',#4961,(#4965,#4972),.PCURVE_S1.); +#4961 = LINE('',#4962,#4963); +#4962 = CARTESIAN_POINT('',(1.95,4.175,1.025)); +#4963 = VECTOR('',#4964,1.); +#4964 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#4965 = PCURVE('',#3350,#4966); +#4966 = DEFINITIONAL_REPRESENTATION('',(#4967),#4971); +#4967 = LINE('',#4968,#4969); +#4968 = CARTESIAN_POINT('',(0.,0.)); +#4969 = VECTOR('',#4970,1.); +#4970 = DIRECTION('',(1.,0.)); +#4971 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4972 = PCURVE('',#4973,#4978); +#4973 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#4974,#4975) + ,(#4976,#4977 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,8.35),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#4974 = CARTESIAN_POINT('',(1.95,4.175,1.025)); +#4975 = CARTESIAN_POINT('',(1.875,4.1375,1.025)); +#4976 = CARTESIAN_POINT('',(1.95,-4.175,1.025)); +#4977 = CARTESIAN_POINT('',(1.875,-4.1375,1.025)); +#4978 = DEFINITIONAL_REPRESENTATION('',(#4979),#4983); +#4979 = LINE('',#4980,#4981); +#4980 = CARTESIAN_POINT('',(0.,4.305728658121E-15)); +#4981 = VECTOR('',#4982,1.); +#4982 = DIRECTION('',(1.,-3.5444335244E-15)); +#4983 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#4984 = ADVANCED_FACE('',(#4985),#3294,.F.); +#4985 = FACE_BOUND('',#4986,.F.); +#4986 = EDGE_LOOP('',(#4987,#5015,#5016,#5039)); +#4987 = ORIENTED_EDGE('',*,*,#4988,.F.); +#4988 = EDGE_CURVE('',#3279,#4989,#4991,.T.); +#4989 = VERTEX_POINT('',#4990); +#4990 = CARTESIAN_POINT('',(1.95,-0.205,1.025)); +#4991 = SURFACE_CURVE('',#4992,(#4996,#5003),.PCURVE_S1.); +#4992 = LINE('',#4993,#4994); +#4993 = CARTESIAN_POINT('',(1.95,-0.205,0.778829828783)); +#4994 = VECTOR('',#4995,1.); +#4995 = DIRECTION('',(0.,0.,1.)); +#4996 = PCURVE('',#3294,#4997); +#4997 = DEFINITIONAL_REPRESENTATION('',(#4998),#5002); +#4998 = LINE('',#4999,#5000); +#4999 = CARTESIAN_POINT('',(4.38,-0.246170171217)); +#5000 = VECTOR('',#5001,1.); +#5001 = DIRECTION('',(0.,1.)); +#5002 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5003 = PCURVE('',#5004,#5009); +#5004 = PLANE('',#5005); +#5005 = AXIS2_PLACEMENT_3D('',#5006,#5007,#5008); +#5006 = CARTESIAN_POINT('',(2.41578967201,-0.205,0.532659657565)); +#5007 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#5008 = DIRECTION('',(0.,0.,1.)); +#5009 = DEFINITIONAL_REPRESENTATION('',(#5010),#5014); +#5010 = LINE('',#5011,#5012); +#5011 = CARTESIAN_POINT('',(0.246170171218,0.46578967201)); +#5012 = VECTOR('',#5013,1.); +#5013 = DIRECTION('',(1.,0.)); +#5014 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5015 = ORIENTED_EDGE('',*,*,#3278,.T.); +#5016 = ORIENTED_EDGE('',*,*,#5017,.T.); +#5017 = EDGE_CURVE('',#3251,#5018,#5020,.T.); +#5018 = VERTEX_POINT('',#5019); +#5019 = CARTESIAN_POINT('',(1.95,-1.065,1.025)); +#5020 = SURFACE_CURVE('',#5021,(#5025,#5032),.PCURVE_S1.); +#5021 = LINE('',#5022,#5023); +#5022 = CARTESIAN_POINT('',(1.95,-1.065,0.778829828783)); +#5023 = VECTOR('',#5024,1.); +#5024 = DIRECTION('',(0.,0.,1.)); +#5025 = PCURVE('',#3294,#5026); +#5026 = DEFINITIONAL_REPRESENTATION('',(#5027),#5031); +#5027 = LINE('',#5028,#5029); +#5028 = CARTESIAN_POINT('',(5.24,-0.246170171217)); +#5029 = VECTOR('',#5030,1.); +#5030 = DIRECTION('',(0.,1.)); +#5031 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5032 = PCURVE('',#4842,#5033); +#5033 = DEFINITIONAL_REPRESENTATION('',(#5034),#5038); +#5034 = LINE('',#5035,#5036); +#5035 = CARTESIAN_POINT('',(0.246170171218,0.46578967201)); +#5036 = VECTOR('',#5037,1.); +#5037 = DIRECTION('',(1.,0.)); +#5038 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5039 = ORIENTED_EDGE('',*,*,#5040,.F.); +#5040 = EDGE_CURVE('',#4989,#5018,#5041,.T.); +#5041 = SURFACE_CURVE('',#5042,(#5046,#5053),.PCURVE_S1.); +#5042 = LINE('',#5043,#5044); +#5043 = CARTESIAN_POINT('',(1.95,4.175,1.025)); +#5044 = VECTOR('',#5045,1.); +#5045 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#5046 = PCURVE('',#3294,#5047); +#5047 = DEFINITIONAL_REPRESENTATION('',(#5048),#5052); +#5048 = LINE('',#5049,#5050); +#5049 = CARTESIAN_POINT('',(0.,0.)); +#5050 = VECTOR('',#5051,1.); +#5051 = DIRECTION('',(1.,0.)); +#5052 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5053 = PCURVE('',#5054,#5059); +#5054 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#5055,#5056) + ,(#5057,#5058 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,8.35),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#5055 = CARTESIAN_POINT('',(1.95,4.175,1.025)); +#5056 = CARTESIAN_POINT('',(1.875,4.1375,1.025)); +#5057 = CARTESIAN_POINT('',(1.95,-4.175,1.025)); +#5058 = CARTESIAN_POINT('',(1.875,-4.1375,1.025)); +#5059 = DEFINITIONAL_REPRESENTATION('',(#5060),#5064); +#5060 = LINE('',#5061,#5062); +#5061 = CARTESIAN_POINT('',(0.,6.317715225407E-15)); +#5062 = VECTOR('',#5063,1.); +#5063 = DIRECTION('',(1.,-3.671478240758E-15)); +#5064 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5065 = ADVANCED_FACE('',(#5066),#3322,.F.); +#5066 = FACE_BOUND('',#5067,.F.); +#5067 = EDGE_LOOP('',(#5068,#5091,#5092,#5115)); +#5068 = ORIENTED_EDGE('',*,*,#5069,.F.); +#5069 = EDGE_CURVE('',#3307,#5070,#5072,.T.); +#5070 = VERTEX_POINT('',#5071); +#5071 = CARTESIAN_POINT('',(2.25,0.205,0.825)); +#5072 = SURFACE_CURVE('',#5073,(#5077,#5084),.PCURVE_S1.); +#5073 = LINE('',#5074,#5075); +#5074 = CARTESIAN_POINT('',(1.8,0.205,0.825)); +#5075 = VECTOR('',#5076,1.); +#5076 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#5077 = PCURVE('',#3322,#5078); +#5078 = DEFINITIONAL_REPRESENTATION('',(#5079),#5083); +#5079 = LINE('',#5080,#5081); +#5080 = CARTESIAN_POINT('',(0.,0.)); +#5081 = VECTOR('',#5082,1.); +#5082 = DIRECTION('',(1.,0.)); +#5083 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5084 = PCURVE('',#4947,#5085); +#5085 = DEFINITIONAL_REPRESENTATION('',(#5086),#5090); +#5086 = LINE('',#5087,#5088); +#5087 = CARTESIAN_POINT('',(0.292340342435,0.61578967201)); +#5088 = VECTOR('',#5089,1.); +#5089 = DIRECTION('',(0.,-1.)); +#5090 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5091 = ORIENTED_EDGE('',*,*,#3306,.T.); +#5092 = ORIENTED_EDGE('',*,*,#5093,.T.); +#5093 = EDGE_CURVE('',#3279,#5094,#5096,.T.); +#5094 = VERTEX_POINT('',#5095); +#5095 = CARTESIAN_POINT('',(2.25,-0.205,0.825)); +#5096 = SURFACE_CURVE('',#5097,(#5101,#5108),.PCURVE_S1.); +#5097 = LINE('',#5098,#5099); +#5098 = CARTESIAN_POINT('',(1.8,-0.205,0.825)); +#5099 = VECTOR('',#5100,1.); +#5100 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#5101 = PCURVE('',#3322,#5102); +#5102 = DEFINITIONAL_REPRESENTATION('',(#5103),#5107); +#5103 = LINE('',#5104,#5105); +#5104 = CARTESIAN_POINT('',(-9.103828801925E-17,-0.41)); +#5105 = VECTOR('',#5106,1.); +#5106 = DIRECTION('',(1.,0.)); +#5107 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5108 = PCURVE('',#5004,#5109); +#5109 = DEFINITIONAL_REPRESENTATION('',(#5110),#5114); +#5110 = LINE('',#5111,#5112); +#5111 = CARTESIAN_POINT('',(0.292340342435,0.61578967201)); +#5112 = VECTOR('',#5113,1.); +#5113 = DIRECTION('',(0.,-1.)); +#5114 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5115 = ORIENTED_EDGE('',*,*,#5116,.F.); +#5116 = EDGE_CURVE('',#5070,#5094,#5117,.T.); +#5117 = SURFACE_CURVE('',#5118,(#5122,#5129),.PCURVE_S1.); +#5118 = LINE('',#5119,#5120); +#5119 = CARTESIAN_POINT('',(2.25,0.205,0.825)); +#5120 = VECTOR('',#5121,1.); +#5121 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#5122 = PCURVE('',#3322,#5123); +#5123 = DEFINITIONAL_REPRESENTATION('',(#5124),#5128); +#5124 = LINE('',#5125,#5126); +#5125 = CARTESIAN_POINT('',(0.45,-9.992007221625E-17)); +#5126 = VECTOR('',#5127,1.); +#5127 = DIRECTION('',(0.,-1.)); +#5128 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5129 = PCURVE('',#5130,#5135); +#5130 = CYLINDRICAL_SURFACE('',#5131,0.1); +#5131 = AXIS2_PLACEMENT_3D('',#5132,#5133,#5134); +#5132 = CARTESIAN_POINT('',(2.25,0.205,0.725)); +#5133 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#5134 = DIRECTION('',(4.440892098501E-15,9.860761315262E-31,1.)); +#5135 = DEFINITIONAL_REPRESENTATION('',(#5136),#5140); +#5136 = LINE('',#5137,#5138); +#5137 = CARTESIAN_POINT('',(0.,0.)); +#5138 = VECTOR('',#5139,1.); +#5139 = DIRECTION('',(0.,-1.)); +#5140 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5141 = ADVANCED_FACE('',(#5142),#3560,.F.); +#5142 = FACE_BOUND('',#5143,.F.); +#5143 = EDGE_LOOP('',(#5144,#5145,#5146,#5174)); +#5144 = ORIENTED_EDGE('',*,*,#4082,.T.); +#5145 = ORIENTED_EDGE('',*,*,#3546,.T.); +#5146 = ORIENTED_EDGE('',*,*,#5147,.F.); +#5147 = EDGE_CURVE('',#5148,#3547,#5150,.T.); +#5148 = VERTEX_POINT('',#5149); +#5149 = CARTESIAN_POINT('',(1.775,4.35,1.025)); +#5150 = SURFACE_CURVE('',#5151,(#5155,#5162),.PCURVE_S1.); +#5151 = LINE('',#5152,#5153); +#5152 = CARTESIAN_POINT('',(1.775,4.35,1.025)); +#5153 = VECTOR('',#5154,1.); +#5154 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#5155 = PCURVE('',#3560,#5156); +#5156 = DEFINITIONAL_REPRESENTATION('',(#5157),#5161); +#5157 = LINE('',#5158,#5159); +#5158 = CARTESIAN_POINT('',(0.,0.)); +#5159 = VECTOR('',#5160,1.); +#5160 = DIRECTION('',(1.,0.)); +#5161 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5162 = PCURVE('',#5163,#5168); +#5163 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#5164,#5165) + ,(#5166,#5167 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#5164 = CARTESIAN_POINT('',(1.775,4.35,1.025)); +#5165 = CARTESIAN_POINT('',(1.7375,4.275,1.025)); +#5166 = CARTESIAN_POINT('',(1.95,4.175,1.025)); +#5167 = CARTESIAN_POINT('',(1.875,4.1375,1.025)); +#5168 = DEFINITIONAL_REPRESENTATION('',(#5169),#5173); +#5169 = LINE('',#5170,#5171); +#5170 = CARTESIAN_POINT('',(-1.424868498589E-16,-5.311956991949E-15)); +#5171 = VECTOR('',#5172,1.); +#5172 = DIRECTION('',(1.,2.43255418999E-14)); +#5173 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5174 = ORIENTED_EDGE('',*,*,#5175,.F.); +#5175 = EDGE_CURVE('',#4083,#5148,#5176,.T.); +#5176 = SURFACE_CURVE('',#5177,(#5180,#5186),.PCURVE_S1.); +#5177 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5178,#5179),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5178 = CARTESIAN_POINT('',(1.775,4.35,0.825)); +#5179 = CARTESIAN_POINT('',(1.775,4.35,1.025)); +#5180 = PCURVE('',#3560,#5181); +#5181 = DEFINITIONAL_REPRESENTATION('',(#5182),#5185); +#5182 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5183,#5184),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5183 = CARTESIAN_POINT('',(0.,-0.2)); +#5184 = CARTESIAN_POINT('',(0.,0.)); +#5185 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5186 = PCURVE('',#5187,#5192); +#5187 = PLANE('',#5188); +#5188 = AXIS2_PLACEMENT_3D('',#5189,#5190,#5191); +#5189 = CARTESIAN_POINT('',(-1.775,4.35,1.025)); +#5190 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#5191 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#5192 = DEFINITIONAL_REPRESENTATION('',(#5193),#5196); +#5193 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5194,#5195),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5194 = CARTESIAN_POINT('',(3.55,-0.2)); +#5195 = CARTESIAN_POINT('',(3.55,0.)); +#5196 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5197 = ADVANCED_FACE('',(#5198),#3587,.F.); +#5198 = FACE_BOUND('',#5199,.F.); +#5199 = EDGE_LOOP('',(#5200,#5222,#5223,#5224)); +#5200 = ORIENTED_EDGE('',*,*,#5201,.F.); +#5201 = EDGE_CURVE('',#3547,#5202,#5204,.T.); +#5202 = VERTEX_POINT('',#5203); +#5203 = CARTESIAN_POINT('',(1.875,4.1375,1.025)); +#5204 = SURFACE_CURVE('',#5205,(#5208,#5215),.PCURVE_S1.); +#5205 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5206,#5207),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5206 = CARTESIAN_POINT('',(1.95,4.175,1.025)); +#5207 = CARTESIAN_POINT('',(1.875,4.1375,1.025)); +#5208 = PCURVE('',#3587,#5209); +#5209 = DEFINITIONAL_REPRESENTATION('',(#5210),#5214); +#5210 = LINE('',#5211,#5212); +#5211 = CARTESIAN_POINT('',(-3.250147938153E-16,1.933901861802E-15)); +#5212 = VECTOR('',#5213,1.); +#5213 = DIRECTION('',(4.003930637195E-16,1.)); +#5214 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5215 = PCURVE('',#5163,#5216); +#5216 = DEFINITIONAL_REPRESENTATION('',(#5217),#5221); +#5217 = LINE('',#5218,#5219); +#5218 = CARTESIAN_POINT('',(0.247487373415,-1.265422341802E-15)); +#5219 = VECTOR('',#5220,1.); +#5220 = DIRECTION('',(1.08246744901E-15,1.)); +#5221 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5222 = ORIENTED_EDGE('',*,*,#3573,.T.); +#5223 = ORIENTED_EDGE('',*,*,#3680,.T.); +#5224 = ORIENTED_EDGE('',*,*,#5225,.F.); +#5225 = EDGE_CURVE('',#5202,#3653,#5226,.T.); +#5226 = SURFACE_CURVE('',#5227,(#5231,#5237),.PCURVE_S1.); +#5227 = LINE('',#5228,#5229); +#5228 = CARTESIAN_POINT('',(1.875,4.1375,1.025)); +#5229 = VECTOR('',#5230,1.); +#5230 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#5231 = PCURVE('',#3587,#5232); +#5232 = DEFINITIONAL_REPRESENTATION('',(#5233),#5236); +#5233 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5234,#5235),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,0.1225),.PIECEWISE_BEZIER_KNOTS.); +#5234 = CARTESIAN_POINT('',(7.537826990421E-17,1.)); +#5235 = CARTESIAN_POINT('',(0.123610271903,1.)); +#5236 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5237 = PCURVE('',#3668,#5238); +#5238 = DEFINITIONAL_REPRESENTATION('',(#5239),#5243); +#5239 = LINE('',#5240,#5241); +#5240 = CARTESIAN_POINT('',(-1.516666002792E-16,-4.780697711218E-17)); +#5241 = VECTOR('',#5242,1.); +#5242 = DIRECTION('',(1.,1.807578795803E-15)); +#5243 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5244 = ADVANCED_FACE('',(#5245),#3668,.F.); +#5245 = FACE_BOUND('',#5246,.F.); +#5246 = EDGE_LOOP('',(#5247,#5248,#5249,#5271,#5299,#5321,#5349,#5371, + #5399,#5421,#5449,#5471,#5499,#5521,#5549,#5571,#5598,#5625)); +#5247 = ORIENTED_EDGE('',*,*,#5225,.T.); +#5248 = ORIENTED_EDGE('',*,*,#3652,.T.); +#5249 = ORIENTED_EDGE('',*,*,#5250,.T.); +#5250 = EDGE_CURVE('',#3626,#5251,#5253,.T.); +#5251 = VERTEX_POINT('',#5252); +#5252 = CARTESIAN_POINT('',(1.875,2.745,1.025)); +#5253 = SURFACE_CURVE('',#5254,(#5258,#5265),.PCURVE_S1.); +#5254 = LINE('',#5255,#5256); +#5255 = CARTESIAN_POINT('',(1.875,4.1375,1.025)); +#5256 = VECTOR('',#5257,1.); +#5257 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#5258 = PCURVE('',#3668,#5259); +#5259 = DEFINITIONAL_REPRESENTATION('',(#5260),#5264); +#5260 = LINE('',#5261,#5262); +#5261 = CARTESIAN_POINT('',(2.22044604925E-16,2.364277418874E-18)); +#5262 = VECTOR('',#5263,1.); +#5263 = DIRECTION('',(1.,5.501662458691E-17)); +#5264 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5265 = PCURVE('',#3641,#5266); +#5266 = DEFINITIONAL_REPRESENTATION('',(#5267),#5270); +#5267 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5268,#5269),.UNSPECIFIED.,.F., + .F.,(2,2),(0.5325,1.3925),.PIECEWISE_BEZIER_KNOTS.); +#5268 = CARTESIAN_POINT('',(0.537326283988,1.)); +#5269 = CARTESIAN_POINT('',(1.405120845921,1.)); +#5270 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5271 = ORIENTED_EDGE('',*,*,#5272,.T.); +#5272 = EDGE_CURVE('',#5251,#5273,#5275,.T.); +#5273 = VERTEX_POINT('',#5274); +#5274 = CARTESIAN_POINT('',(1.875,2.335,1.025)); +#5275 = SURFACE_CURVE('',#5276,(#5280,#5287),.PCURVE_S1.); +#5276 = LINE('',#5277,#5278); +#5277 = CARTESIAN_POINT('',(1.875,4.1375,1.025)); +#5278 = VECTOR('',#5279,1.); +#5279 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#5280 = PCURVE('',#3668,#5281); +#5281 = DEFINITIONAL_REPRESENTATION('',(#5282),#5286); +#5282 = LINE('',#5283,#5284); +#5283 = CARTESIAN_POINT('',(0.,1.92364141861E-16)); +#5284 = VECTOR('',#5285,1.); +#5285 = DIRECTION('',(1.,-1.154113379572E-16)); +#5286 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5287 = PCURVE('',#5288,#5293); +#5288 = PLANE('',#5289); +#5289 = AXIS2_PLACEMENT_3D('',#5290,#5291,#5292); +#5290 = CARTESIAN_POINT('',(2.25,2.745,1.025)); +#5291 = DIRECTION('',(0.,0.,-1.)); +#5292 = DIRECTION('',(-1.,-2.22044604925E-16,-0.)); +#5293 = DEFINITIONAL_REPRESENTATION('',(#5294),#5298); +#5294 = LINE('',#5295,#5296); +#5295 = CARTESIAN_POINT('',(0.375,1.3925)); +#5296 = VECTOR('',#5297,1.); +#5297 = DIRECTION('',(0.,-1.)); +#5298 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5299 = ORIENTED_EDGE('',*,*,#5300,.T.); +#5300 = EDGE_CURVE('',#5273,#5301,#5303,.T.); +#5301 = VERTEX_POINT('',#5302); +#5302 = CARTESIAN_POINT('',(1.875,1.475,1.025)); +#5303 = SURFACE_CURVE('',#5304,(#5308,#5315),.PCURVE_S1.); +#5304 = LINE('',#5305,#5306); +#5305 = CARTESIAN_POINT('',(1.875,4.1375,1.025)); +#5306 = VECTOR('',#5307,1.); +#5307 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#5308 = PCURVE('',#3668,#5309); +#5309 = DEFINITIONAL_REPRESENTATION('',(#5310),#5314); +#5310 = LINE('',#5311,#5312); +#5311 = CARTESIAN_POINT('',(0.,-1.102978213277E-16)); +#5312 = VECTOR('',#5313,1.); +#5313 = DIRECTION('',(1.,-5.059795039418E-21)); +#5314 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5315 = PCURVE('',#4649,#5316); +#5316 = DEFINITIONAL_REPRESENTATION('',(#5317),#5320); +#5317 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5318,#5319),.UNSPECIFIED.,.F., + .F.,(2,2),(1.8025,2.6625),.PIECEWISE_BEZIER_KNOTS.); +#5318 = CARTESIAN_POINT('',(1.818836858006,1.)); +#5319 = CARTESIAN_POINT('',(2.68663141994,1.)); +#5320 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5321 = ORIENTED_EDGE('',*,*,#5322,.T.); +#5322 = EDGE_CURVE('',#5301,#5323,#5325,.T.); +#5323 = VERTEX_POINT('',#5324); +#5324 = CARTESIAN_POINT('',(1.875,1.065,1.025)); +#5325 = SURFACE_CURVE('',#5326,(#5330,#5337),.PCURVE_S1.); +#5326 = LINE('',#5327,#5328); +#5327 = CARTESIAN_POINT('',(1.875,4.1375,1.025)); +#5328 = VECTOR('',#5329,1.); +#5329 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#5330 = PCURVE('',#3668,#5331); +#5331 = DEFINITIONAL_REPRESENTATION('',(#5332),#5336); +#5332 = LINE('',#5333,#5334); +#5333 = CARTESIAN_POINT('',(0.,-8.195943121848E-16)); +#5334 = VECTOR('',#5335,1.); +#5335 = DIRECTION('',(1.,2.308510318691E-16)); +#5336 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5337 = PCURVE('',#5338,#5343); +#5338 = PLANE('',#5339); +#5339 = AXIS2_PLACEMENT_3D('',#5340,#5341,#5342); +#5340 = CARTESIAN_POINT('',(2.25,1.475,1.025)); +#5341 = DIRECTION('',(0.,0.,-1.)); +#5342 = DIRECTION('',(-1.,-2.22044604925E-16,-0.)); +#5343 = DEFINITIONAL_REPRESENTATION('',(#5344),#5348); +#5344 = LINE('',#5345,#5346); +#5345 = CARTESIAN_POINT('',(0.375,2.6625)); +#5346 = VECTOR('',#5347,1.); +#5347 = DIRECTION('',(0.,-1.)); +#5348 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5349 = ORIENTED_EDGE('',*,*,#5350,.T.); +#5350 = EDGE_CURVE('',#5323,#5351,#5353,.T.); +#5351 = VERTEX_POINT('',#5352); +#5352 = CARTESIAN_POINT('',(1.875,0.205,1.025)); +#5353 = SURFACE_CURVE('',#5354,(#5358,#5365),.PCURVE_S1.); +#5354 = LINE('',#5355,#5356); +#5355 = CARTESIAN_POINT('',(1.875,4.1375,1.025)); +#5356 = VECTOR('',#5357,1.); +#5357 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#5358 = PCURVE('',#3668,#5359); +#5359 = DEFINITIONAL_REPRESENTATION('',(#5360),#5364); +#5360 = LINE('',#5361,#5362); +#5361 = CARTESIAN_POINT('',(0.,-2.04931117337E-16)); +#5362 = VECTOR('',#5363,1.); +#5363 = DIRECTION('',(1.,-5.059798615721E-21)); +#5364 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5365 = PCURVE('',#4973,#5366); +#5366 = DEFINITIONAL_REPRESENTATION('',(#5367),#5370); +#5367 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5368,#5369),.UNSPECIFIED.,.F., + .F.,(2,2),(3.0725,3.9325),.PIECEWISE_BEZIER_KNOTS.); +#5368 = CARTESIAN_POINT('',(3.100347432024,1.)); +#5369 = CARTESIAN_POINT('',(3.968141993958,1.)); +#5370 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5371 = ORIENTED_EDGE('',*,*,#5372,.T.); +#5372 = EDGE_CURVE('',#5351,#5373,#5375,.T.); +#5373 = VERTEX_POINT('',#5374); +#5374 = CARTESIAN_POINT('',(1.875,-0.205,1.025)); +#5375 = SURFACE_CURVE('',#5376,(#5380,#5387),.PCURVE_S1.); +#5376 = LINE('',#5377,#5378); +#5377 = CARTESIAN_POINT('',(1.875,4.1375,1.025)); +#5378 = VECTOR('',#5379,1.); +#5379 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#5380 = PCURVE('',#3668,#5381); +#5381 = DEFINITIONAL_REPRESENTATION('',(#5382),#5386); +#5382 = LINE('',#5383,#5384); +#5383 = CARTESIAN_POINT('',(0.,1.455899314452E-15)); +#5384 = VECTOR('',#5385,1.); +#5385 = DIRECTION('',(1.,-3.824640942883E-16)); +#5386 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5387 = PCURVE('',#5388,#5393); +#5388 = PLANE('',#5389); +#5389 = AXIS2_PLACEMENT_3D('',#5390,#5391,#5392); +#5390 = CARTESIAN_POINT('',(2.25,0.205,1.025)); +#5391 = DIRECTION('',(0.,0.,-1.)); +#5392 = DIRECTION('',(-1.,-2.22044604925E-16,-0.)); +#5393 = DEFINITIONAL_REPRESENTATION('',(#5394),#5398); +#5394 = LINE('',#5395,#5396); +#5395 = CARTESIAN_POINT('',(0.375,3.9325)); +#5396 = VECTOR('',#5397,1.); +#5397 = DIRECTION('',(0.,-1.)); +#5398 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5399 = ORIENTED_EDGE('',*,*,#5400,.T.); +#5400 = EDGE_CURVE('',#5373,#5401,#5403,.T.); +#5401 = VERTEX_POINT('',#5402); +#5402 = CARTESIAN_POINT('',(1.875,-1.065,1.025)); +#5403 = SURFACE_CURVE('',#5404,(#5408,#5415),.PCURVE_S1.); +#5404 = LINE('',#5405,#5406); +#5405 = CARTESIAN_POINT('',(1.875,4.1375,1.025)); +#5406 = VECTOR('',#5407,1.); +#5407 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#5408 = PCURVE('',#3668,#5409); +#5409 = DEFINITIONAL_REPRESENTATION('',(#5410),#5414); +#5410 = LINE('',#5411,#5412); +#5411 = CARTESIAN_POINT('',(0.,9.825916665413E-16)); +#5412 = VECTOR('',#5413,1.); +#5413 = DIRECTION('',(1.,-2.373592177037E-16)); +#5414 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5415 = PCURVE('',#5054,#5416); +#5416 = DEFINITIONAL_REPRESENTATION('',(#5417),#5420); +#5417 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5418,#5419),.UNSPECIFIED.,.F., + .F.,(2,2),(4.3425,5.2025),.PIECEWISE_BEZIER_KNOTS.); +#5418 = CARTESIAN_POINT('',(4.381858006042,1.)); +#5419 = CARTESIAN_POINT('',(5.249652567976,1.)); +#5420 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5421 = ORIENTED_EDGE('',*,*,#5422,.T.); +#5422 = EDGE_CURVE('',#5401,#5423,#5425,.T.); +#5423 = VERTEX_POINT('',#5424); +#5424 = CARTESIAN_POINT('',(1.875,-1.475,1.025)); +#5425 = SURFACE_CURVE('',#5426,(#5430,#5437),.PCURVE_S1.); +#5426 = LINE('',#5427,#5428); +#5427 = CARTESIAN_POINT('',(1.875,4.1375,1.025)); +#5428 = VECTOR('',#5429,1.); +#5429 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#5430 = PCURVE('',#3668,#5431); +#5431 = DEFINITIONAL_REPRESENTATION('',(#5432),#5436); +#5432 = LINE('',#5433,#5434); +#5433 = CARTESIAN_POINT('',(0.,2.447502462183E-15)); +#5434 = VECTOR('',#5435,1.); +#5435 = DIRECTION('',(1.,-4.978919597284E-16)); +#5436 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5437 = PCURVE('',#5438,#5443); +#5438 = PLANE('',#5439); +#5439 = AXIS2_PLACEMENT_3D('',#5440,#5441,#5442); +#5440 = CARTESIAN_POINT('',(2.25,-1.065,1.025)); +#5441 = DIRECTION('',(0.,0.,-1.)); +#5442 = DIRECTION('',(-1.,-2.22044604925E-16,-0.)); +#5443 = DEFINITIONAL_REPRESENTATION('',(#5444),#5448); +#5444 = LINE('',#5445,#5446); +#5445 = CARTESIAN_POINT('',(0.375,5.2025)); +#5446 = VECTOR('',#5447,1.); +#5447 = DIRECTION('',(0.,-1.)); +#5448 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5449 = ORIENTED_EDGE('',*,*,#5450,.T.); +#5450 = EDGE_CURVE('',#5423,#5451,#5453,.T.); +#5451 = VERTEX_POINT('',#5452); +#5452 = CARTESIAN_POINT('',(1.875,-2.335,1.025)); +#5453 = SURFACE_CURVE('',#5454,(#5458,#5465),.PCURVE_S1.); +#5454 = LINE('',#5455,#5456); +#5455 = CARTESIAN_POINT('',(1.875,4.1375,1.025)); +#5456 = VECTOR('',#5457,1.); +#5457 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#5458 = PCURVE('',#3668,#5459); +#5459 = DEFINITIONAL_REPRESENTATION('',(#5460),#5464); +#5460 = LINE('',#5461,#5462); +#5461 = CARTESIAN_POINT('',(0.,1.209713189855E-16)); +#5462 = VECTOR('',#5463,1.); +#5463 = DIRECTION('',(1.,-7.228852542036E-17)); +#5464 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5465 = PCURVE('',#4730,#5466); +#5466 = DEFINITIONAL_REPRESENTATION('',(#5467),#5470); +#5467 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5468,#5469),.UNSPECIFIED.,.F., + .F.,(2,2),(5.6125,6.4725),.PIECEWISE_BEZIER_KNOTS.); +#5468 = CARTESIAN_POINT('',(5.66336858006,1.)); +#5469 = CARTESIAN_POINT('',(6.531163141994,1.)); +#5470 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5471 = ORIENTED_EDGE('',*,*,#5472,.T.); +#5472 = EDGE_CURVE('',#5451,#5473,#5475,.T.); +#5473 = VERTEX_POINT('',#5474); +#5474 = CARTESIAN_POINT('',(1.875,-2.745,1.025)); +#5475 = SURFACE_CURVE('',#5476,(#5480,#5487),.PCURVE_S1.); +#5476 = LINE('',#5477,#5478); +#5477 = CARTESIAN_POINT('',(1.875,4.1375,1.025)); +#5478 = VECTOR('',#5479,1.); +#5479 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#5480 = PCURVE('',#3668,#5481); +#5481 = DEFINITIONAL_REPRESENTATION('',(#5482),#5486); +#5482 = LINE('',#5483,#5484); +#5483 = CARTESIAN_POINT('',(0.,2.190712540518E-15)); +#5484 = VECTOR('',#5485,1.); +#5485 = DIRECTION('',(1.,-3.824581800632E-16)); +#5486 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5487 = PCURVE('',#5488,#5493); +#5488 = PLANE('',#5489); +#5489 = AXIS2_PLACEMENT_3D('',#5490,#5491,#5492); +#5490 = CARTESIAN_POINT('',(2.25,-2.335,1.025)); +#5491 = DIRECTION('',(0.,0.,-1.)); +#5492 = DIRECTION('',(-1.,-2.22044604925E-16,-0.)); +#5493 = DEFINITIONAL_REPRESENTATION('',(#5494),#5498); +#5494 = LINE('',#5495,#5496); +#5495 = CARTESIAN_POINT('',(0.375,6.4725)); +#5496 = VECTOR('',#5497,1.); +#5497 = DIRECTION('',(0.,-1.)); +#5498 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5499 = ORIENTED_EDGE('',*,*,#5500,.T.); +#5500 = EDGE_CURVE('',#5473,#5501,#5503,.T.); +#5501 = VERTEX_POINT('',#5502); +#5502 = CARTESIAN_POINT('',(1.875,-3.605,1.025)); +#5503 = SURFACE_CURVE('',#5504,(#5508,#5515),.PCURVE_S1.); +#5504 = LINE('',#5505,#5506); +#5505 = CARTESIAN_POINT('',(1.875,4.1375,1.025)); +#5506 = VECTOR('',#5507,1.); +#5507 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#5508 = PCURVE('',#3668,#5509); +#5509 = DEFINITIONAL_REPRESENTATION('',(#5510),#5514); +#5510 = LINE('',#5511,#5512); +#5511 = CARTESIAN_POINT('',(0.,7.482229627071E-16)); +#5512 = VECTOR('',#5513,1.); +#5513 = DIRECTION('',(1.,-1.273023304261E-16)); +#5514 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5515 = PCURVE('',#4406,#5516); +#5516 = DEFINITIONAL_REPRESENTATION('',(#5517),#5520); +#5517 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5518,#5519),.UNSPECIFIED.,.F., + .F.,(2,2),(6.8825,7.7425),.PIECEWISE_BEZIER_KNOTS.); +#5518 = CARTESIAN_POINT('',(6.944879154079,1.)); +#5519 = CARTESIAN_POINT('',(7.812673716012,1.)); +#5520 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5521 = ORIENTED_EDGE('',*,*,#5522,.T.); +#5522 = EDGE_CURVE('',#5501,#5523,#5525,.T.); +#5523 = VERTEX_POINT('',#5524); +#5524 = CARTESIAN_POINT('',(1.875,-4.015,1.025)); +#5525 = SURFACE_CURVE('',#5526,(#5530,#5537),.PCURVE_S1.); +#5526 = LINE('',#5527,#5528); +#5527 = CARTESIAN_POINT('',(1.875,4.1375,1.025)); +#5528 = VECTOR('',#5529,1.); +#5529 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#5530 = PCURVE('',#3668,#5531); +#5531 = DEFINITIONAL_REPRESENTATION('',(#5532),#5536); +#5532 = LINE('',#5533,#5534); +#5533 = CARTESIAN_POINT('',(0.,-8.828774680769E-16)); +#5534 = VECTOR('',#5535,1.); +#5535 = DIRECTION('',(1.,7.917185954353E-17)); +#5536 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5537 = PCURVE('',#5538,#5543); +#5538 = PLANE('',#5539); +#5539 = AXIS2_PLACEMENT_3D('',#5540,#5541,#5542); +#5540 = CARTESIAN_POINT('',(2.25,-3.605,1.025)); +#5541 = DIRECTION('',(0.,0.,-1.)); +#5542 = DIRECTION('',(-1.,-2.22044604925E-16,-0.)); +#5543 = DEFINITIONAL_REPRESENTATION('',(#5544),#5548); +#5544 = LINE('',#5545,#5546); +#5545 = CARTESIAN_POINT('',(0.375,7.7425)); +#5546 = VECTOR('',#5547,1.); +#5547 = DIRECTION('',(0.,-1.)); +#5548 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5549 = ORIENTED_EDGE('',*,*,#5550,.T.); +#5550 = EDGE_CURVE('',#5523,#5551,#5553,.T.); +#5551 = VERTEX_POINT('',#5552); +#5552 = CARTESIAN_POINT('',(1.875,-4.1375,1.025)); +#5553 = SURFACE_CURVE('',#5554,(#5558,#5565),.PCURVE_S1.); +#5554 = LINE('',#5555,#5556); +#5555 = CARTESIAN_POINT('',(1.875,4.1375,1.025)); +#5556 = VECTOR('',#5557,1.); +#5557 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#5558 = PCURVE('',#3668,#5559); +#5559 = DEFINITIONAL_REPRESENTATION('',(#5560),#5564); +#5560 = LINE('',#5561,#5562); +#5561 = CARTESIAN_POINT('',(0.,1.549009700243E-14)); +#5562 = VECTOR('',#5563,1.); +#5563 = DIRECTION('',(1.,-1.933149328491E-15)); +#5564 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5565 = PCURVE('',#4244,#5566); +#5566 = DEFINITIONAL_REPRESENTATION('',(#5567),#5570); +#5567 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5568,#5569),.UNSPECIFIED.,.F., + .F.,(2,2),(8.1525,8.275),.PIECEWISE_BEZIER_KNOTS.); +#5568 = CARTESIAN_POINT('',(8.226389728097,1.)); +#5569 = CARTESIAN_POINT('',(8.35,1.)); +#5570 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5571 = ORIENTED_EDGE('',*,*,#5572,.T.); +#5572 = EDGE_CURVE('',#5551,#5573,#5575,.T.); +#5573 = VERTEX_POINT('',#5574); +#5574 = CARTESIAN_POINT('',(1.760171280765,-4.080085640382,1.75)); +#5575 = SURFACE_CURVE('',#5576,(#5579,#5586),.PCURVE_S1.); +#5576 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5577,#5578),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5577 = CARTESIAN_POINT('',(1.875,-4.1375,1.025)); +#5578 = CARTESIAN_POINT('',(1.760171280765,-4.080085640382,1.75)); +#5579 = PCURVE('',#3668,#5580); +#5580 = DEFINITIONAL_REPRESENTATION('',(#5581),#5585); +#5581 = LINE('',#5582,#5583); +#5582 = CARTESIAN_POINT('',(8.275,1.381543802881E-16)); +#5583 = VECTOR('',#5584,1.); +#5584 = DIRECTION('',(0.,1.)); +#5585 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5586 = PCURVE('',#5587,#5592); +#5587 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#5588,#5589) + ,(#5590,#5591 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#5588 = CARTESIAN_POINT('',(1.875,-4.1375,1.025)); +#5589 = CARTESIAN_POINT('',(1.760171280765,-4.080085640382,1.75)); +#5590 = CARTESIAN_POINT('',(1.7375,-4.275,1.025)); +#5591 = CARTESIAN_POINT('',(1.680085640382,-4.160171280765,1.75)); +#5592 = DEFINITIONAL_REPRESENTATION('',(#5593),#5597); +#5593 = LINE('',#5594,#5595); +#5594 = CARTESIAN_POINT('',(-6.086888979784E-16,2.525109798792E-16)); +#5595 = VECTOR('',#5596,1.); +#5596 = DIRECTION('',(4.820002967903E-16,1.)); +#5597 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5598 = ORIENTED_EDGE('',*,*,#5599,.F.); +#5599 = EDGE_CURVE('',#5600,#5573,#5602,.T.); +#5600 = VERTEX_POINT('',#5601); +#5601 = CARTESIAN_POINT('',(1.760171280765,4.080085640382,1.75)); +#5602 = SURFACE_CURVE('',#5603,(#5607,#5613),.PCURVE_S1.); +#5603 = LINE('',#5604,#5605); +#5604 = CARTESIAN_POINT('',(1.760171280765,4.080085640382,1.75)); +#5605 = VECTOR('',#5606,1.); +#5606 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#5607 = PCURVE('',#3668,#5608); +#5608 = DEFINITIONAL_REPRESENTATION('',(#5609),#5612); +#5609 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5610,#5611),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,8.160171280764),.PIECEWISE_BEZIER_KNOTS.); +#5610 = CARTESIAN_POINT('',(-6.598996897297E-16,1.)); +#5611 = CARTESIAN_POINT('',(8.275,1.)); +#5612 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5613 = PCURVE('',#5614,#5619); +#5614 = PLANE('',#5615); +#5615 = AXIS2_PLACEMENT_3D('',#5616,#5617,#5618); +#5616 = CARTESIAN_POINT('',(-1.680085640382,4.160171280765,1.75)); +#5617 = DIRECTION('',(0.,0.,1.)); +#5618 = DIRECTION('',(0.374466205639,-0.927240562548,0.)); +#5619 = DEFINITIONAL_REPRESENTATION('',(#5620),#5624); +#5620 = LINE('',#5621,#5622); +#5621 = CARTESIAN_POINT('',(1.362518609926,3.159956396994)); +#5622 = VECTOR('',#5623,1.); +#5623 = DIRECTION('',(0.927240562548,-0.374466205639)); +#5624 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5625 = ORIENTED_EDGE('',*,*,#5626,.F.); +#5626 = EDGE_CURVE('',#5202,#5600,#5627,.T.); +#5627 = SURFACE_CURVE('',#5628,(#5631,#5638),.PCURVE_S1.); +#5628 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5629,#5630),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5629 = CARTESIAN_POINT('',(1.875,4.1375,1.025)); +#5630 = CARTESIAN_POINT('',(1.760171280765,4.080085640382,1.75)); +#5631 = PCURVE('',#3668,#5632); +#5632 = DEFINITIONAL_REPRESENTATION('',(#5633),#5637); +#5633 = LINE('',#5634,#5635); +#5634 = CARTESIAN_POINT('',(-1.516666002792E-16,-4.780697711218E-17)); +#5635 = VECTOR('',#5636,1.); +#5636 = DIRECTION('',(-5.109882305183E-16,1.)); +#5637 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5638 = PCURVE('',#5639,#5644); +#5639 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#5640,#5641) + ,(#5642,#5643 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#5640 = CARTESIAN_POINT('',(1.7375,4.275,1.025)); +#5641 = CARTESIAN_POINT('',(1.680085640382,4.160171280765,1.75)); +#5642 = CARTESIAN_POINT('',(1.875,4.1375,1.025)); +#5643 = CARTESIAN_POINT('',(1.760171280765,4.080085640382,1.75)); +#5644 = DEFINITIONAL_REPRESENTATION('',(#5645),#5649); +#5645 = LINE('',#5646,#5647); +#5646 = CARTESIAN_POINT('',(0.194454364826,-9.971874260173E-18)); +#5647 = VECTOR('',#5648,1.); +#5648 = DIRECTION('',(-1.665334536938E-16,1.)); +#5649 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5650 = ADVANCED_FACE('',(#5651),#3641,.F.); +#5651 = FACE_BOUND('',#5652,.F.); +#5652 = EDGE_LOOP('',(#5653,#5654,#5655,#5675)); +#5653 = ORIENTED_EDGE('',*,*,#3625,.F.); +#5654 = ORIENTED_EDGE('',*,*,#3875,.T.); +#5655 = ORIENTED_EDGE('',*,*,#5656,.T.); +#5656 = EDGE_CURVE('',#3848,#5251,#5657,.T.); +#5657 = SURFACE_CURVE('',#5658,(#5662,#5668),.PCURVE_S1.); +#5658 = LINE('',#5659,#5660); +#5659 = CARTESIAN_POINT('',(2.25,2.745,1.025)); +#5660 = VECTOR('',#5661,1.); +#5661 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#5662 = PCURVE('',#3641,#5663); +#5663 = DEFINITIONAL_REPRESENTATION('',(#5664),#5667); +#5664 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5665,#5666),.UNSPECIFIED.,.F., + .F.,(2,2),(0.3,0.375),.PIECEWISE_BEZIER_KNOTS.); +#5665 = CARTESIAN_POINT('',(1.43,2.450302786902E-15)); +#5666 = CARTESIAN_POINT('',(1.405120845921,1.)); +#5667 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5668 = PCURVE('',#5288,#5669); +#5669 = DEFINITIONAL_REPRESENTATION('',(#5670),#5674); +#5670 = LINE('',#5671,#5672); +#5671 = CARTESIAN_POINT('',(-0.,0.)); +#5672 = VECTOR('',#5673,1.); +#5673 = DIRECTION('',(1.,0.)); +#5674 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5675 = ORIENTED_EDGE('',*,*,#5250,.F.); +#5676 = ADVANCED_FACE('',(#5677),#3863,.F.); +#5677 = FACE_BOUND('',#5678,.F.); +#5678 = EDGE_LOOP('',(#5679,#5680,#5681,#5709,#5737,#5766,#5794,#5822, + #5850,#5883,#5911,#5940)); +#5679 = ORIENTED_EDGE('',*,*,#3847,.F.); +#5680 = ORIENTED_EDGE('',*,*,#4421,.T.); +#5681 = ORIENTED_EDGE('',*,*,#5682,.T.); +#5682 = EDGE_CURVE('',#4422,#5683,#5685,.T.); +#5683 = VERTEX_POINT('',#5684); +#5684 = CARTESIAN_POINT('',(2.35,2.745,0.725)); +#5685 = SURFACE_CURVE('',#5686,(#5691,#5702),.PCURVE_S1.); +#5686 = CIRCLE('',#5687,0.1); +#5687 = AXIS2_PLACEMENT_3D('',#5688,#5689,#5690); +#5688 = CARTESIAN_POINT('',(2.25,2.745,0.725)); +#5689 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#5690 = DIRECTION('',(4.440892098501E-15,9.860761315262E-31,1.)); +#5691 = PCURVE('',#3863,#5692); +#5692 = DEFINITIONAL_REPRESENTATION('',(#5693),#5701); +#5693 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#5694,#5695,#5696,#5697, +#5698,#5699,#5700),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#5694 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#5695 = CARTESIAN_POINT('',(0.292340342435,-7.415408746888E-03)); +#5696 = CARTESIAN_POINT('',(0.142340342435,7.918713163156E-02)); +#5697 = CARTESIAN_POINT('',(-7.659657565E-03,0.16578967201)); +#5698 = CARTESIAN_POINT('',(0.142340342435,0.252392212388)); +#5699 = CARTESIAN_POINT('',(0.292340342435,0.338994752767)); +#5700 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#5701 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5702 = PCURVE('',#4487,#5703); +#5703 = DEFINITIONAL_REPRESENTATION('',(#5704),#5708); +#5704 = LINE('',#5705,#5706); +#5705 = CARTESIAN_POINT('',(0.,0.)); +#5706 = VECTOR('',#5707,1.); +#5707 = DIRECTION('',(1.,0.)); +#5708 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5709 = ORIENTED_EDGE('',*,*,#5710,.T.); +#5710 = EDGE_CURVE('',#5683,#5711,#5713,.T.); +#5711 = VERTEX_POINT('',#5712); +#5712 = CARTESIAN_POINT('',(2.35,2.745,0.3)); +#5713 = SURFACE_CURVE('',#5714,(#5718,#5725),.PCURVE_S1.); +#5714 = LINE('',#5715,#5716); +#5715 = CARTESIAN_POINT('',(2.35,2.745,0.725)); +#5716 = VECTOR('',#5717,1.); +#5717 = DIRECTION('',(1.044915787883E-15,2.320179133003E-31,-1.)); +#5718 = PCURVE('',#3863,#5719); +#5719 = DEFINITIONAL_REPRESENTATION('',(#5720),#5724); +#5720 = LINE('',#5721,#5722); +#5721 = CARTESIAN_POINT('',(0.192340342435,6.578967201E-02)); +#5722 = VECTOR('',#5723,1.); +#5723 = DIRECTION('',(-1.,-1.044915787883E-15)); +#5724 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5725 = PCURVE('',#5726,#5731); +#5726 = PLANE('',#5727); +#5727 = AXIS2_PLACEMENT_3D('',#5728,#5729,#5730); +#5728 = CARTESIAN_POINT('',(2.35,2.745,0.725)); +#5729 = DIRECTION('',(1.,2.22044604925E-16,1.044915787883E-15)); +#5730 = DIRECTION('',(1.044915787883E-15,2.320179133003E-31,-1.)); +#5731 = DEFINITIONAL_REPRESENTATION('',(#5732),#5736); +#5732 = LINE('',#5733,#5734); +#5733 = CARTESIAN_POINT('',(0.,0.)); +#5734 = VECTOR('',#5735,1.); +#5735 = DIRECTION('',(1.,0.)); +#5736 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5737 = ORIENTED_EDGE('',*,*,#5738,.T.); +#5738 = EDGE_CURVE('',#5711,#5739,#5741,.T.); +#5739 = VERTEX_POINT('',#5740); +#5740 = CARTESIAN_POINT('',(2.65,2.745,5.551115123126E-17)); +#5741 = SURFACE_CURVE('',#5742,(#5747,#5754),.PCURVE_S1.); +#5742 = CIRCLE('',#5743,0.3); +#5743 = AXIS2_PLACEMENT_3D('',#5744,#5745,#5746); +#5744 = CARTESIAN_POINT('',(2.65,2.745,0.3)); +#5745 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#5746 = DIRECTION('',(-1.,-2.22044604925E-16,3.515706244646E-15)); +#5747 = PCURVE('',#3863,#5748); +#5748 = DEFINITIONAL_REPRESENTATION('',(#5749),#5753); +#5749 = CIRCLE('',#5750,0.3); +#5750 = AXIS2_PLACEMENT_2D('',#5751,#5752); +#5751 = CARTESIAN_POINT('',(-0.232659657565,-0.23421032799)); +#5752 = DIRECTION('',(3.515706244646E-15,1.)); +#5753 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5754 = PCURVE('',#5755,#5760); +#5755 = CYLINDRICAL_SURFACE('',#5756,0.3); +#5756 = AXIS2_PLACEMENT_3D('',#5757,#5758,#5759); +#5757 = CARTESIAN_POINT('',(2.65,2.745,0.3)); +#5758 = DIRECTION('',(-2.22044604925E-16,1.,-0.)); +#5759 = DIRECTION('',(-1.,-2.22044604925E-16,3.515706244646E-15)); +#5760 = DEFINITIONAL_REPRESENTATION('',(#5761),#5765); +#5761 = LINE('',#5762,#5763); +#5762 = CARTESIAN_POINT('',(6.28318530718,0.)); +#5763 = VECTOR('',#5764,1.); +#5764 = DIRECTION('',(-1.,0.)); +#5765 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5766 = ORIENTED_EDGE('',*,*,#5767,.T.); +#5767 = EDGE_CURVE('',#5739,#5768,#5770,.T.); +#5768 = VERTEX_POINT('',#5769); +#5769 = CARTESIAN_POINT('',(3.,2.745,5.551115123126E-17)); +#5770 = SURFACE_CURVE('',#5771,(#5775,#5782),.PCURVE_S1.); +#5771 = LINE('',#5772,#5773); +#5772 = CARTESIAN_POINT('',(2.65,2.745,5.551115123126E-17)); +#5773 = VECTOR('',#5774,1.); +#5774 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#5775 = PCURVE('',#3863,#5776); +#5776 = DEFINITIONAL_REPRESENTATION('',(#5777),#5781); +#5777 = LINE('',#5778,#5779); +#5778 = CARTESIAN_POINT('',(-0.532659657565,-0.23421032799)); +#5779 = VECTOR('',#5780,1.); +#5780 = DIRECTION('',(0.,-1.)); +#5781 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5782 = PCURVE('',#5783,#5788); +#5783 = PLANE('',#5784); +#5784 = AXIS2_PLACEMENT_3D('',#5785,#5786,#5787); +#5785 = CARTESIAN_POINT('',(2.65,2.745,5.551115123126E-17)); +#5786 = DIRECTION('',(0.,0.,1.)); +#5787 = DIRECTION('',(1.,2.22044604925E-16,-0.)); +#5788 = DEFINITIONAL_REPRESENTATION('',(#5789),#5793); +#5789 = LINE('',#5790,#5791); +#5790 = CARTESIAN_POINT('',(0.,0.)); +#5791 = VECTOR('',#5792,1.); +#5792 = DIRECTION('',(1.,0.)); +#5793 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5794 = ORIENTED_EDGE('',*,*,#5795,.T.); +#5795 = EDGE_CURVE('',#5768,#5796,#5798,.T.); +#5796 = VERTEX_POINT('',#5797); +#5797 = CARTESIAN_POINT('',(3.,2.745,0.2)); +#5798 = SURFACE_CURVE('',#5799,(#5803,#5810),.PCURVE_S1.); +#5799 = LINE('',#5800,#5801); +#5800 = CARTESIAN_POINT('',(3.,2.745,5.551115123126E-17)); +#5801 = VECTOR('',#5802,1.); +#5802 = DIRECTION('',(0.,0.,1.)); +#5803 = PCURVE('',#3863,#5804); +#5804 = DEFINITIONAL_REPRESENTATION('',(#5805),#5809); +#5805 = LINE('',#5806,#5807); +#5806 = CARTESIAN_POINT('',(-0.532659657565,-0.58421032799)); +#5807 = VECTOR('',#5808,1.); +#5808 = DIRECTION('',(1.,0.)); +#5809 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5810 = PCURVE('',#5811,#5816); +#5811 = PLANE('',#5812); +#5812 = AXIS2_PLACEMENT_3D('',#5813,#5814,#5815); +#5813 = CARTESIAN_POINT('',(3.,2.745,5.551115123126E-17)); +#5814 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#5815 = DIRECTION('',(0.,0.,1.)); +#5816 = DEFINITIONAL_REPRESENTATION('',(#5817),#5821); +#5817 = LINE('',#5818,#5819); +#5818 = CARTESIAN_POINT('',(0.,0.)); +#5819 = VECTOR('',#5820,1.); +#5820 = DIRECTION('',(1.,0.)); +#5821 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5822 = ORIENTED_EDGE('',*,*,#5823,.T.); +#5823 = EDGE_CURVE('',#5796,#5824,#5826,.T.); +#5824 = VERTEX_POINT('',#5825); +#5825 = CARTESIAN_POINT('',(2.65,2.745,0.2)); +#5826 = SURFACE_CURVE('',#5827,(#5831,#5838),.PCURVE_S1.); +#5827 = LINE('',#5828,#5829); +#5828 = CARTESIAN_POINT('',(3.,2.745,0.2)); +#5829 = VECTOR('',#5830,1.); +#5830 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#5831 = PCURVE('',#3863,#5832); +#5832 = DEFINITIONAL_REPRESENTATION('',(#5833),#5837); +#5833 = LINE('',#5834,#5835); +#5834 = CARTESIAN_POINT('',(-0.332659657565,-0.58421032799)); +#5835 = VECTOR('',#5836,1.); +#5836 = DIRECTION('',(0.,1.)); +#5837 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5838 = PCURVE('',#5839,#5844); +#5839 = PLANE('',#5840); +#5840 = AXIS2_PLACEMENT_3D('',#5841,#5842,#5843); +#5841 = CARTESIAN_POINT('',(3.,2.745,0.2)); +#5842 = DIRECTION('',(0.,0.,-1.)); +#5843 = DIRECTION('',(-1.,-2.22044604925E-16,-0.)); +#5844 = DEFINITIONAL_REPRESENTATION('',(#5845),#5849); +#5845 = LINE('',#5846,#5847); +#5846 = CARTESIAN_POINT('',(-0.,0.)); +#5847 = VECTOR('',#5848,1.); +#5848 = DIRECTION('',(1.,0.)); +#5849 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5850 = ORIENTED_EDGE('',*,*,#5851,.T.); +#5851 = EDGE_CURVE('',#5824,#5852,#5854,.T.); +#5852 = VERTEX_POINT('',#5853); +#5853 = CARTESIAN_POINT('',(2.55,2.745,0.3)); +#5854 = SURFACE_CURVE('',#5855,(#5860,#5871),.PCURVE_S1.); +#5855 = CIRCLE('',#5856,0.1); +#5856 = AXIS2_PLACEMENT_3D('',#5857,#5858,#5859); +#5857 = CARTESIAN_POINT('',(2.65,2.745,0.3)); +#5858 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#5859 = DIRECTION('',(0.,0.,-1.)); +#5860 = PCURVE('',#3863,#5861); +#5861 = DEFINITIONAL_REPRESENTATION('',(#5862),#5870); +#5862 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#5863,#5864,#5865,#5866, +#5867,#5868,#5869),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#5863 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#5864 = CARTESIAN_POINT('',(-0.332659657565,-6.100524723311E-02)); +#5865 = CARTESIAN_POINT('',(-0.182659657565,-0.147607787612)); +#5866 = CARTESIAN_POINT('',(-3.2659657565E-02,-0.23421032799)); +#5867 = CARTESIAN_POINT('',(-0.182659657565,-0.320812868368)); +#5868 = CARTESIAN_POINT('',(-0.332659657565,-0.407415408747)); +#5869 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#5870 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5871 = PCURVE('',#5872,#5877); +#5872 = CYLINDRICAL_SURFACE('',#5873,0.1); +#5873 = AXIS2_PLACEMENT_3D('',#5874,#5875,#5876); +#5874 = CARTESIAN_POINT('',(2.65,2.745,0.3)); +#5875 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#5876 = DIRECTION('',(0.,0.,-1.)); +#5877 = DEFINITIONAL_REPRESENTATION('',(#5878),#5882); +#5878 = LINE('',#5879,#5880); +#5879 = CARTESIAN_POINT('',(0.,0.)); +#5880 = VECTOR('',#5881,1.); +#5881 = DIRECTION('',(1.,0.)); +#5882 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5883 = ORIENTED_EDGE('',*,*,#5884,.T.); +#5884 = EDGE_CURVE('',#5852,#5885,#5887,.T.); +#5885 = VERTEX_POINT('',#5886); +#5886 = CARTESIAN_POINT('',(2.55,2.745,0.725)); +#5887 = SURFACE_CURVE('',#5888,(#5892,#5899),.PCURVE_S1.); +#5888 = LINE('',#5889,#5890); +#5889 = CARTESIAN_POINT('',(2.55,2.745,0.3)); +#5890 = VECTOR('',#5891,1.); +#5891 = DIRECTION('',(0.,0.,1.)); +#5892 = PCURVE('',#3863,#5893); +#5893 = DEFINITIONAL_REPRESENTATION('',(#5894),#5898); +#5894 = LINE('',#5895,#5896); +#5895 = CARTESIAN_POINT('',(-0.232659657565,-0.13421032799)); +#5896 = VECTOR('',#5897,1.); +#5897 = DIRECTION('',(1.,0.)); +#5898 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5899 = PCURVE('',#5900,#5905); +#5900 = PLANE('',#5901); +#5901 = AXIS2_PLACEMENT_3D('',#5902,#5903,#5904); +#5902 = CARTESIAN_POINT('',(2.55,2.745,0.3)); +#5903 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#5904 = DIRECTION('',(0.,0.,1.)); +#5905 = DEFINITIONAL_REPRESENTATION('',(#5906),#5910); +#5906 = LINE('',#5907,#5908); +#5907 = CARTESIAN_POINT('',(0.,0.)); +#5908 = VECTOR('',#5909,1.); +#5909 = DIRECTION('',(1.,0.)); +#5910 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5911 = ORIENTED_EDGE('',*,*,#5912,.T.); +#5912 = EDGE_CURVE('',#5885,#5913,#5915,.T.); +#5913 = VERTEX_POINT('',#5914); +#5914 = CARTESIAN_POINT('',(2.25,2.745,1.025)); +#5915 = SURFACE_CURVE('',#5916,(#5921,#5928),.PCURVE_S1.); +#5916 = CIRCLE('',#5917,0.3); +#5917 = AXIS2_PLACEMENT_3D('',#5918,#5919,#5920); +#5918 = CARTESIAN_POINT('',(2.25,2.745,0.725)); +#5919 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#5920 = DIRECTION('',(1.,2.22044604925E-16,3.700743415417E-16)); +#5921 = PCURVE('',#3863,#5922); +#5922 = DEFINITIONAL_REPRESENTATION('',(#5923),#5927); +#5923 = CIRCLE('',#5924,0.3); +#5924 = AXIS2_PLACEMENT_2D('',#5925,#5926); +#5925 = CARTESIAN_POINT('',(0.192340342435,0.16578967201)); +#5926 = DIRECTION('',(3.700743415417E-16,-1.)); +#5927 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5928 = PCURVE('',#5929,#5934); +#5929 = CYLINDRICAL_SURFACE('',#5930,0.3); +#5930 = AXIS2_PLACEMENT_3D('',#5931,#5932,#5933); +#5931 = CARTESIAN_POINT('',(2.25,2.745,0.725)); +#5932 = DIRECTION('',(-2.22044604925E-16,1.,-0.)); +#5933 = DIRECTION('',(1.,2.22044604925E-16,3.700743415417E-16)); +#5934 = DEFINITIONAL_REPRESENTATION('',(#5935),#5939); +#5935 = LINE('',#5936,#5937); +#5936 = CARTESIAN_POINT('',(6.28318530718,0.)); +#5937 = VECTOR('',#5938,1.); +#5938 = DIRECTION('',(-1.,0.)); +#5939 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5940 = ORIENTED_EDGE('',*,*,#5941,.T.); +#5941 = EDGE_CURVE('',#5913,#3848,#5942,.T.); +#5942 = SURFACE_CURVE('',#5943,(#5947,#5954),.PCURVE_S1.); +#5943 = LINE('',#5944,#5945); +#5944 = CARTESIAN_POINT('',(2.25,2.745,1.025)); +#5945 = VECTOR('',#5946,1.); +#5946 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#5947 = PCURVE('',#3863,#5948); +#5948 = DEFINITIONAL_REPRESENTATION('',(#5949),#5953); +#5949 = LINE('',#5950,#5951); +#5950 = CARTESIAN_POINT('',(0.492340342435,0.16578967201)); +#5951 = VECTOR('',#5952,1.); +#5952 = DIRECTION('',(0.,1.)); +#5953 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5954 = PCURVE('',#5288,#5955); +#5955 = DEFINITIONAL_REPRESENTATION('',(#5956),#5960); +#5956 = LINE('',#5957,#5958); +#5957 = CARTESIAN_POINT('',(-0.,0.)); +#5958 = VECTOR('',#5959,1.); +#5959 = DIRECTION('',(1.,0.)); +#5960 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5961 = ADVANCED_FACE('',(#5962),#4066,.F.); +#5962 = FACE_BOUND('',#5963,.F.); +#5963 = EDGE_LOOP('',(#5964,#5965,#5966,#5989)); +#5964 = ORIENTED_EDGE('',*,*,#4052,.T.); +#5965 = ORIENTED_EDGE('',*,*,#4105,.T.); +#5966 = ORIENTED_EDGE('',*,*,#5967,.F.); +#5967 = EDGE_CURVE('',#5968,#4083,#5970,.T.); +#5968 = VERTEX_POINT('',#5969); +#5969 = CARTESIAN_POINT('',(-1.775,4.35,0.825)); +#5970 = SURFACE_CURVE('',#5971,(#5975,#5982),.PCURVE_S1.); +#5971 = LINE('',#5972,#5973); +#5972 = CARTESIAN_POINT('',(-1.775,4.35,0.825)); +#5973 = VECTOR('',#5974,1.); +#5974 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#5975 = PCURVE('',#4066,#5976); +#5976 = DEFINITIONAL_REPRESENTATION('',(#5977),#5981); +#5977 = LINE('',#5978,#5979); +#5978 = CARTESIAN_POINT('',(3.262123127006E-17,1.)); +#5979 = VECTOR('',#5980,1.); +#5980 = DIRECTION('',(1.,6.254777603522E-17)); +#5981 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5982 = PCURVE('',#5187,#5983); +#5983 = DEFINITIONAL_REPRESENTATION('',(#5984),#5988); +#5984 = LINE('',#5985,#5986); +#5985 = CARTESIAN_POINT('',(0.,-0.2)); +#5986 = VECTOR('',#5987,1.); +#5987 = DIRECTION('',(1.,0.)); +#5988 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#5989 = ORIENTED_EDGE('',*,*,#5990,.F.); +#5990 = EDGE_CURVE('',#3902,#5968,#5991,.T.); +#5991 = SURFACE_CURVE('',#5992,(#5995,#6002),.PCURVE_S1.); +#5992 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#5993,#5994),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#5993 = CARTESIAN_POINT('',(-1.717585640382,4.235171280765,0.1)); +#5994 = CARTESIAN_POINT('',(-1.775,4.35,0.825)); +#5995 = PCURVE('',#4066,#5996); +#5996 = DEFINITIONAL_REPRESENTATION('',(#5997),#6001); +#5997 = LINE('',#5998,#5999); +#5998 = CARTESIAN_POINT('',(2.879519048319E-16,-1.396298627236E-17)); +#5999 = VECTOR('',#6000,1.); +#6000 = DIRECTION('',(-2.553306735619E-16,1.)); +#6001 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6002 = PCURVE('',#3917,#6003); +#6003 = DEFINITIONAL_REPRESENTATION('',(#6004),#6008); +#6004 = LINE('',#6005,#6006); +#6005 = CARTESIAN_POINT('',(0.247487373415,-8.266802507344E-17)); +#6006 = VECTOR('',#6007,1.); +#6007 = DIRECTION('',(1.387778780781E-16,1.)); +#6008 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6009 = ADVANCED_FACE('',(#6010),#3998,.F.); +#6010 = FACE_BOUND('',#6011,.F.); +#6011 = EDGE_LOOP('',(#6012,#6013,#6035,#6061)); +#6012 = ORIENTED_EDGE('',*,*,#3982,.T.); +#6013 = ORIENTED_EDGE('',*,*,#6014,.T.); +#6014 = EDGE_CURVE('',#3956,#6015,#6017,.T.); +#6015 = VERTEX_POINT('',#6016); +#6016 = CARTESIAN_POINT('',(-1.775,-4.35,0.825)); +#6017 = SURFACE_CURVE('',#6018,(#6021,#6028),.PCURVE_S1.); +#6018 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6019,#6020),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#6019 = CARTESIAN_POINT('',(-1.717585640382,-4.235171280765,0.1)); +#6020 = CARTESIAN_POINT('',(-1.775,-4.35,0.825)); +#6021 = PCURVE('',#3998,#6022); +#6022 = DEFINITIONAL_REPRESENTATION('',(#6023),#6027); +#6023 = LINE('',#6024,#6025); +#6024 = CARTESIAN_POINT('',(3.55,-8.354401814696E-17)); +#6025 = VECTOR('',#6026,1.); +#6026 = DIRECTION('',(0.,1.)); +#6027 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6028 = PCURVE('',#3971,#6029); +#6029 = DEFINITIONAL_REPRESENTATION('',(#6030),#6034); +#6030 = LINE('',#6031,#6032); +#6031 = CARTESIAN_POINT('',(-1.094764205587E-15,9.979549707346E-17)); +#6032 = VECTOR('',#6033,1.); +#6033 = DIRECTION('',(5.287130198624E-16,1.)); +#6034 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6035 = ORIENTED_EDGE('',*,*,#6036,.F.); +#6036 = EDGE_CURVE('',#4130,#6015,#6037,.T.); +#6037 = SURFACE_CURVE('',#6038,(#6042,#6049),.PCURVE_S1.); +#6038 = LINE('',#6039,#6040); +#6039 = CARTESIAN_POINT('',(1.775,-4.35,0.825)); +#6040 = VECTOR('',#6041,1.); +#6041 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#6042 = PCURVE('',#3998,#6043); +#6043 = DEFINITIONAL_REPRESENTATION('',(#6044),#6048); +#6044 = LINE('',#6045,#6046); +#6045 = CARTESIAN_POINT('',(3.262123127006E-17,1.)); +#6046 = VECTOR('',#6047,1.); +#6047 = DIRECTION('',(1.,6.254777603522E-17)); +#6048 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6049 = PCURVE('',#6050,#6055); +#6050 = PLANE('',#6051); +#6051 = AXIS2_PLACEMENT_3D('',#6052,#6053,#6054); +#6052 = CARTESIAN_POINT('',(1.775,-4.35,1.025)); +#6053 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#6054 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#6055 = DEFINITIONAL_REPRESENTATION('',(#6056),#6060); +#6056 = LINE('',#6057,#6058); +#6057 = CARTESIAN_POINT('',(-0.,-0.2)); +#6058 = VECTOR('',#6059,1.); +#6059 = DIRECTION('',(1.,0.)); +#6060 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6061 = ORIENTED_EDGE('',*,*,#4129,.F.); +#6062 = ADVANCED_FACE('',(#6063),#3971,.F.); +#6063 = FACE_BOUND('',#6064,.F.); +#6064 = EDGE_LOOP('',(#6065,#6066,#6088,#6114)); +#6065 = ORIENTED_EDGE('',*,*,#3955,.T.); +#6066 = ORIENTED_EDGE('',*,*,#6067,.T.); +#6067 = EDGE_CURVE('',#3929,#6068,#6070,.T.); +#6068 = VERTEX_POINT('',#6069); +#6069 = CARTESIAN_POINT('',(-1.95,-4.175,0.825)); +#6070 = SURFACE_CURVE('',#6071,(#6074,#6081),.PCURVE_S1.); +#6071 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6072,#6073),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#6072 = CARTESIAN_POINT('',(-1.835171280765,-4.117585640382,0.1)); +#6073 = CARTESIAN_POINT('',(-1.95,-4.175,0.825)); +#6074 = PCURVE('',#3971,#6075); +#6075 = DEFINITIONAL_REPRESENTATION('',(#6076),#6080); +#6076 = LINE('',#6077,#6078); +#6077 = CARTESIAN_POINT('',(0.247487373415,-1.190288331173E-17)); +#6078 = VECTOR('',#6079,1.); +#6079 = DIRECTION('',(4.718447854657E-16,1.)); +#6080 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6081 = PCURVE('',#3944,#6082); +#6082 = DEFINITIONAL_REPRESENTATION('',(#6083),#6087); +#6083 = LINE('',#6084,#6085); +#6084 = CARTESIAN_POINT('',(-5.26757239086E-16,1.224928093993E-17)); +#6085 = VECTOR('',#6086,1.); +#6086 = DIRECTION('',(4.946409333099E-16,1.)); +#6087 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6088 = ORIENTED_EDGE('',*,*,#6089,.F.); +#6089 = EDGE_CURVE('',#6015,#6068,#6090,.T.); +#6090 = SURFACE_CURVE('',#6091,(#6095,#6102),.PCURVE_S1.); +#6091 = LINE('',#6092,#6093); +#6092 = CARTESIAN_POINT('',(-1.775,-4.35,0.825)); +#6093 = VECTOR('',#6094,1.); +#6094 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#6095 = PCURVE('',#3971,#6096); +#6096 = DEFINITIONAL_REPRESENTATION('',(#6097),#6101); +#6097 = LINE('',#6098,#6099); +#6098 = CARTESIAN_POINT('',(5.623993954359E-17,1.)); +#6099 = VECTOR('',#6100,1.); +#6100 = DIRECTION('',(1.,0.)); +#6101 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6102 = PCURVE('',#6103,#6108); +#6103 = PLANE('',#6104); +#6104 = AXIS2_PLACEMENT_3D('',#6105,#6106,#6107); +#6105 = CARTESIAN_POINT('',(-1.775,-4.35,1.025)); +#6106 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#6107 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#6108 = DEFINITIONAL_REPRESENTATION('',(#6109),#6113); +#6109 = LINE('',#6110,#6111); +#6110 = CARTESIAN_POINT('',(0.,-0.2)); +#6111 = VECTOR('',#6112,1.); +#6112 = DIRECTION('',(1.,0.)); +#6113 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6114 = ORIENTED_EDGE('',*,*,#6014,.F.); +#6115 = ADVANCED_FACE('',(#6116),#3944,.F.); +#6116 = FACE_BOUND('',#6117,.F.); +#6117 = EDGE_LOOP('',(#6118,#6119,#6141,#6169,#6197,#6225,#6253,#6281, + #6309,#6337,#6365,#6393,#6421,#6449,#6477,#6505,#6533,#6559)); +#6118 = ORIENTED_EDGE('',*,*,#3928,.T.); +#6119 = ORIENTED_EDGE('',*,*,#6120,.T.); +#6120 = EDGE_CURVE('',#3900,#6121,#6123,.T.); +#6121 = VERTEX_POINT('',#6122); +#6122 = CARTESIAN_POINT('',(-1.95,4.175,0.825)); +#6123 = SURFACE_CURVE('',#6124,(#6127,#6134),.PCURVE_S1.); +#6124 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6125,#6126),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#6125 = CARTESIAN_POINT('',(-1.835171280765,4.117585640382,0.1)); +#6126 = CARTESIAN_POINT('',(-1.95,4.175,0.825)); +#6127 = PCURVE('',#3944,#6128); +#6128 = DEFINITIONAL_REPRESENTATION('',(#6129),#6133); +#6129 = LINE('',#6130,#6131); +#6130 = CARTESIAN_POINT('',(8.35,-4.512195866308E-17)); +#6131 = VECTOR('',#6132,1.); +#6132 = DIRECTION('',(-1.7763568394E-15,1.)); +#6133 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6134 = PCURVE('',#3917,#6135); +#6135 = DEFINITIONAL_REPRESENTATION('',(#6136),#6140); +#6136 = LINE('',#6137,#6138); +#6137 = CARTESIAN_POINT('',(7.708212170719E-16,2.90303552035E-17)); +#6138 = VECTOR('',#6139,1.); +#6139 = DIRECTION('',(-3.959911512563E-16,1.)); +#6140 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6141 = ORIENTED_EDGE('',*,*,#6142,.F.); +#6142 = EDGE_CURVE('',#6143,#6121,#6145,.T.); +#6143 = VERTEX_POINT('',#6144); +#6144 = CARTESIAN_POINT('',(-1.95,4.015,0.825)); +#6145 = SURFACE_CURVE('',#6146,(#6150,#6157),.PCURVE_S1.); +#6146 = LINE('',#6147,#6148); +#6147 = CARTESIAN_POINT('',(-1.95,-4.175,0.825)); +#6148 = VECTOR('',#6149,1.); +#6149 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#6150 = PCURVE('',#3944,#6151); +#6151 = DEFINITIONAL_REPRESENTATION('',(#6152),#6156); +#6152 = LINE('',#6153,#6154); +#6153 = CARTESIAN_POINT('',(0.,1.)); +#6154 = VECTOR('',#6155,1.); +#6155 = DIRECTION('',(1.,0.)); +#6156 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6157 = PCURVE('',#6158,#6163); +#6158 = PLANE('',#6159); +#6159 = AXIS2_PLACEMENT_3D('',#6160,#6161,#6162); +#6160 = CARTESIAN_POINT('',(-1.95,-4.175,1.025)); +#6161 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#6162 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#6163 = DEFINITIONAL_REPRESENTATION('',(#6164),#6168); +#6164 = LINE('',#6165,#6166); +#6165 = CARTESIAN_POINT('',(0.,-0.2)); +#6166 = VECTOR('',#6167,1.); +#6167 = DIRECTION('',(1.,0.)); +#6168 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6169 = ORIENTED_EDGE('',*,*,#6170,.F.); +#6170 = EDGE_CURVE('',#6171,#6143,#6173,.T.); +#6171 = VERTEX_POINT('',#6172); +#6172 = CARTESIAN_POINT('',(-1.95,3.605,0.825)); +#6173 = SURFACE_CURVE('',#6174,(#6178,#6185),.PCURVE_S1.); +#6174 = LINE('',#6175,#6176); +#6175 = CARTESIAN_POINT('',(-1.95,-4.175,0.825)); +#6176 = VECTOR('',#6177,1.); +#6177 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#6178 = PCURVE('',#3944,#6179); +#6179 = DEFINITIONAL_REPRESENTATION('',(#6180),#6184); +#6180 = LINE('',#6181,#6182); +#6181 = CARTESIAN_POINT('',(0.,1.)); +#6182 = VECTOR('',#6183,1.); +#6183 = DIRECTION('',(1.,0.)); +#6184 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6185 = PCURVE('',#6186,#6191); +#6186 = PLANE('',#6187); +#6187 = AXIS2_PLACEMENT_3D('',#6188,#6189,#6190); +#6188 = CARTESIAN_POINT('',(-1.8,3.605,0.825)); +#6189 = DIRECTION('',(0.,0.,1.)); +#6190 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#6191 = DEFINITIONAL_REPRESENTATION('',(#6192),#6196); +#6192 = LINE('',#6193,#6194); +#6193 = CARTESIAN_POINT('',(0.15,7.78)); +#6194 = VECTOR('',#6195,1.); +#6195 = DIRECTION('',(1.224646799147E-16,-1.)); +#6196 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6197 = ORIENTED_EDGE('',*,*,#6198,.F.); +#6198 = EDGE_CURVE('',#6199,#6171,#6201,.T.); +#6199 = VERTEX_POINT('',#6200); +#6200 = CARTESIAN_POINT('',(-1.95,2.745,0.825)); +#6201 = SURFACE_CURVE('',#6202,(#6206,#6213),.PCURVE_S1.); +#6202 = LINE('',#6203,#6204); +#6203 = CARTESIAN_POINT('',(-1.95,-4.175,0.825)); +#6204 = VECTOR('',#6205,1.); +#6205 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#6206 = PCURVE('',#3944,#6207); +#6207 = DEFINITIONAL_REPRESENTATION('',(#6208),#6212); +#6208 = LINE('',#6209,#6210); +#6209 = CARTESIAN_POINT('',(0.,1.)); +#6210 = VECTOR('',#6211,1.); +#6211 = DIRECTION('',(1.,0.)); +#6212 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6213 = PCURVE('',#6214,#6219); +#6214 = PLANE('',#6215); +#6215 = AXIS2_PLACEMENT_3D('',#6216,#6217,#6218); +#6216 = CARTESIAN_POINT('',(-1.95,-4.175,1.025)); +#6217 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#6218 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#6219 = DEFINITIONAL_REPRESENTATION('',(#6220),#6224); +#6220 = LINE('',#6221,#6222); +#6221 = CARTESIAN_POINT('',(0.,-0.2)); +#6222 = VECTOR('',#6223,1.); +#6223 = DIRECTION('',(1.,0.)); +#6224 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6225 = ORIENTED_EDGE('',*,*,#6226,.F.); +#6226 = EDGE_CURVE('',#6227,#6199,#6229,.T.); +#6227 = VERTEX_POINT('',#6228); +#6228 = CARTESIAN_POINT('',(-1.95,2.335,0.825)); +#6229 = SURFACE_CURVE('',#6230,(#6234,#6241),.PCURVE_S1.); +#6230 = LINE('',#6231,#6232); +#6231 = CARTESIAN_POINT('',(-1.95,-4.175,0.825)); +#6232 = VECTOR('',#6233,1.); +#6233 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#6234 = PCURVE('',#3944,#6235); +#6235 = DEFINITIONAL_REPRESENTATION('',(#6236),#6240); +#6236 = LINE('',#6237,#6238); +#6237 = CARTESIAN_POINT('',(0.,1.)); +#6238 = VECTOR('',#6239,1.); +#6239 = DIRECTION('',(1.,0.)); +#6240 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6241 = PCURVE('',#6242,#6247); +#6242 = PLANE('',#6243); +#6243 = AXIS2_PLACEMENT_3D('',#6244,#6245,#6246); +#6244 = CARTESIAN_POINT('',(-1.8,2.335,0.825)); +#6245 = DIRECTION('',(0.,0.,1.)); +#6246 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#6247 = DEFINITIONAL_REPRESENTATION('',(#6248),#6252); +#6248 = LINE('',#6249,#6250); +#6249 = CARTESIAN_POINT('',(0.15,6.51)); +#6250 = VECTOR('',#6251,1.); +#6251 = DIRECTION('',(1.224646799147E-16,-1.)); +#6252 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6253 = ORIENTED_EDGE('',*,*,#6254,.F.); +#6254 = EDGE_CURVE('',#6255,#6227,#6257,.T.); +#6255 = VERTEX_POINT('',#6256); +#6256 = CARTESIAN_POINT('',(-1.95,1.475,0.825)); +#6257 = SURFACE_CURVE('',#6258,(#6262,#6269),.PCURVE_S1.); +#6258 = LINE('',#6259,#6260); +#6259 = CARTESIAN_POINT('',(-1.95,-4.175,0.825)); +#6260 = VECTOR('',#6261,1.); +#6261 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#6262 = PCURVE('',#3944,#6263); +#6263 = DEFINITIONAL_REPRESENTATION('',(#6264),#6268); +#6264 = LINE('',#6265,#6266); +#6265 = CARTESIAN_POINT('',(0.,1.)); +#6266 = VECTOR('',#6267,1.); +#6267 = DIRECTION('',(1.,0.)); +#6268 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6269 = PCURVE('',#6270,#6275); +#6270 = PLANE('',#6271); +#6271 = AXIS2_PLACEMENT_3D('',#6272,#6273,#6274); +#6272 = CARTESIAN_POINT('',(-1.95,-4.175,1.025)); +#6273 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#6274 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#6275 = DEFINITIONAL_REPRESENTATION('',(#6276),#6280); +#6276 = LINE('',#6277,#6278); +#6277 = CARTESIAN_POINT('',(0.,-0.2)); +#6278 = VECTOR('',#6279,1.); +#6279 = DIRECTION('',(1.,0.)); +#6280 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6281 = ORIENTED_EDGE('',*,*,#6282,.F.); +#6282 = EDGE_CURVE('',#6283,#6255,#6285,.T.); +#6283 = VERTEX_POINT('',#6284); +#6284 = CARTESIAN_POINT('',(-1.95,1.065,0.825)); +#6285 = SURFACE_CURVE('',#6286,(#6290,#6297),.PCURVE_S1.); +#6286 = LINE('',#6287,#6288); +#6287 = CARTESIAN_POINT('',(-1.95,-4.175,0.825)); +#6288 = VECTOR('',#6289,1.); +#6289 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#6290 = PCURVE('',#3944,#6291); +#6291 = DEFINITIONAL_REPRESENTATION('',(#6292),#6296); +#6292 = LINE('',#6293,#6294); +#6293 = CARTESIAN_POINT('',(0.,1.)); +#6294 = VECTOR('',#6295,1.); +#6295 = DIRECTION('',(1.,0.)); +#6296 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6297 = PCURVE('',#6298,#6303); +#6298 = PLANE('',#6299); +#6299 = AXIS2_PLACEMENT_3D('',#6300,#6301,#6302); +#6300 = CARTESIAN_POINT('',(-1.8,1.065,0.825)); +#6301 = DIRECTION('',(0.,0.,1.)); +#6302 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#6303 = DEFINITIONAL_REPRESENTATION('',(#6304),#6308); +#6304 = LINE('',#6305,#6306); +#6305 = CARTESIAN_POINT('',(0.15,5.24)); +#6306 = VECTOR('',#6307,1.); +#6307 = DIRECTION('',(1.224646799147E-16,-1.)); +#6308 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6309 = ORIENTED_EDGE('',*,*,#6310,.F.); +#6310 = EDGE_CURVE('',#6311,#6283,#6313,.T.); +#6311 = VERTEX_POINT('',#6312); +#6312 = CARTESIAN_POINT('',(-1.95,0.205,0.825)); +#6313 = SURFACE_CURVE('',#6314,(#6318,#6325),.PCURVE_S1.); +#6314 = LINE('',#6315,#6316); +#6315 = CARTESIAN_POINT('',(-1.95,-4.175,0.825)); +#6316 = VECTOR('',#6317,1.); +#6317 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#6318 = PCURVE('',#3944,#6319); +#6319 = DEFINITIONAL_REPRESENTATION('',(#6320),#6324); +#6320 = LINE('',#6321,#6322); +#6321 = CARTESIAN_POINT('',(0.,1.)); +#6322 = VECTOR('',#6323,1.); +#6323 = DIRECTION('',(1.,0.)); +#6324 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6325 = PCURVE('',#6326,#6331); +#6326 = PLANE('',#6327); +#6327 = AXIS2_PLACEMENT_3D('',#6328,#6329,#6330); +#6328 = CARTESIAN_POINT('',(-1.95,-4.175,1.025)); +#6329 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#6330 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#6331 = DEFINITIONAL_REPRESENTATION('',(#6332),#6336); +#6332 = LINE('',#6333,#6334); +#6333 = CARTESIAN_POINT('',(0.,-0.2)); +#6334 = VECTOR('',#6335,1.); +#6335 = DIRECTION('',(1.,0.)); +#6336 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6337 = ORIENTED_EDGE('',*,*,#6338,.F.); +#6338 = EDGE_CURVE('',#6339,#6311,#6341,.T.); +#6339 = VERTEX_POINT('',#6340); +#6340 = CARTESIAN_POINT('',(-1.95,-0.205,0.825)); +#6341 = SURFACE_CURVE('',#6342,(#6346,#6353),.PCURVE_S1.); +#6342 = LINE('',#6343,#6344); +#6343 = CARTESIAN_POINT('',(-1.95,-4.175,0.825)); +#6344 = VECTOR('',#6345,1.); +#6345 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#6346 = PCURVE('',#3944,#6347); +#6347 = DEFINITIONAL_REPRESENTATION('',(#6348),#6352); +#6348 = LINE('',#6349,#6350); +#6349 = CARTESIAN_POINT('',(0.,1.)); +#6350 = VECTOR('',#6351,1.); +#6351 = DIRECTION('',(1.,0.)); +#6352 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6353 = PCURVE('',#6354,#6359); +#6354 = PLANE('',#6355); +#6355 = AXIS2_PLACEMENT_3D('',#6356,#6357,#6358); +#6356 = CARTESIAN_POINT('',(-1.8,-0.205,0.825)); +#6357 = DIRECTION('',(0.,0.,1.)); +#6358 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#6359 = DEFINITIONAL_REPRESENTATION('',(#6360),#6364); +#6360 = LINE('',#6361,#6362); +#6361 = CARTESIAN_POINT('',(0.15,3.97)); +#6362 = VECTOR('',#6363,1.); +#6363 = DIRECTION('',(1.224646799147E-16,-1.)); +#6364 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6365 = ORIENTED_EDGE('',*,*,#6366,.F.); +#6366 = EDGE_CURVE('',#6367,#6339,#6369,.T.); +#6367 = VERTEX_POINT('',#6368); +#6368 = CARTESIAN_POINT('',(-1.95,-1.065,0.825)); +#6369 = SURFACE_CURVE('',#6370,(#6374,#6381),.PCURVE_S1.); +#6370 = LINE('',#6371,#6372); +#6371 = CARTESIAN_POINT('',(-1.95,-4.175,0.825)); +#6372 = VECTOR('',#6373,1.); +#6373 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#6374 = PCURVE('',#3944,#6375); +#6375 = DEFINITIONAL_REPRESENTATION('',(#6376),#6380); +#6376 = LINE('',#6377,#6378); +#6377 = CARTESIAN_POINT('',(0.,1.)); +#6378 = VECTOR('',#6379,1.); +#6379 = DIRECTION('',(1.,0.)); +#6380 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6381 = PCURVE('',#6382,#6387); +#6382 = PLANE('',#6383); +#6383 = AXIS2_PLACEMENT_3D('',#6384,#6385,#6386); +#6384 = CARTESIAN_POINT('',(-1.95,-4.175,1.025)); +#6385 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#6386 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#6387 = DEFINITIONAL_REPRESENTATION('',(#6388),#6392); +#6388 = LINE('',#6389,#6390); +#6389 = CARTESIAN_POINT('',(0.,-0.2)); +#6390 = VECTOR('',#6391,1.); +#6391 = DIRECTION('',(1.,0.)); +#6392 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6393 = ORIENTED_EDGE('',*,*,#6394,.F.); +#6394 = EDGE_CURVE('',#6395,#6367,#6397,.T.); +#6395 = VERTEX_POINT('',#6396); +#6396 = CARTESIAN_POINT('',(-1.95,-1.475,0.825)); +#6397 = SURFACE_CURVE('',#6398,(#6402,#6409),.PCURVE_S1.); +#6398 = LINE('',#6399,#6400); +#6399 = CARTESIAN_POINT('',(-1.95,-4.175,0.825)); +#6400 = VECTOR('',#6401,1.); +#6401 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#6402 = PCURVE('',#3944,#6403); +#6403 = DEFINITIONAL_REPRESENTATION('',(#6404),#6408); +#6404 = LINE('',#6405,#6406); +#6405 = CARTESIAN_POINT('',(0.,1.)); +#6406 = VECTOR('',#6407,1.); +#6407 = DIRECTION('',(1.,-5.415722071342E-16)); +#6408 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6409 = PCURVE('',#6410,#6415); +#6410 = PLANE('',#6411); +#6411 = AXIS2_PLACEMENT_3D('',#6412,#6413,#6414); +#6412 = CARTESIAN_POINT('',(-1.8,-1.475,0.825)); +#6413 = DIRECTION('',(0.,0.,1.)); +#6414 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#6415 = DEFINITIONAL_REPRESENTATION('',(#6416),#6420); +#6416 = LINE('',#6417,#6418); +#6417 = CARTESIAN_POINT('',(0.15,2.7)); +#6418 = VECTOR('',#6419,1.); +#6419 = DIRECTION('',(1.224646799147E-16,-1.)); +#6420 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6421 = ORIENTED_EDGE('',*,*,#6422,.F.); +#6422 = EDGE_CURVE('',#6423,#6395,#6425,.T.); +#6423 = VERTEX_POINT('',#6424); +#6424 = CARTESIAN_POINT('',(-1.95,-2.335,0.825)); +#6425 = SURFACE_CURVE('',#6426,(#6430,#6437),.PCURVE_S1.); +#6426 = LINE('',#6427,#6428); +#6427 = CARTESIAN_POINT('',(-1.95,-4.175,0.825)); +#6428 = VECTOR('',#6429,1.); +#6429 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#6430 = PCURVE('',#3944,#6431); +#6431 = DEFINITIONAL_REPRESENTATION('',(#6432),#6436); +#6432 = LINE('',#6433,#6434); +#6433 = CARTESIAN_POINT('',(0.,1.)); +#6434 = VECTOR('',#6435,1.); +#6435 = DIRECTION('',(1.,0.)); +#6436 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6437 = PCURVE('',#6438,#6443); +#6438 = PLANE('',#6439); +#6439 = AXIS2_PLACEMENT_3D('',#6440,#6441,#6442); +#6440 = CARTESIAN_POINT('',(-1.95,-4.175,1.025)); +#6441 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#6442 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#6443 = DEFINITIONAL_REPRESENTATION('',(#6444),#6448); +#6444 = LINE('',#6445,#6446); +#6445 = CARTESIAN_POINT('',(0.,-0.2)); +#6446 = VECTOR('',#6447,1.); +#6447 = DIRECTION('',(1.,0.)); +#6448 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6449 = ORIENTED_EDGE('',*,*,#6450,.F.); +#6450 = EDGE_CURVE('',#6451,#6423,#6453,.T.); +#6451 = VERTEX_POINT('',#6452); +#6452 = CARTESIAN_POINT('',(-1.95,-2.745,0.825)); +#6453 = SURFACE_CURVE('',#6454,(#6458,#6465),.PCURVE_S1.); +#6454 = LINE('',#6455,#6456); +#6455 = CARTESIAN_POINT('',(-1.95,-4.175,0.825)); +#6456 = VECTOR('',#6457,1.); +#6457 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#6458 = PCURVE('',#3944,#6459); +#6459 = DEFINITIONAL_REPRESENTATION('',(#6460),#6464); +#6460 = LINE('',#6461,#6462); +#6461 = CARTESIAN_POINT('',(0.,1.)); +#6462 = VECTOR('',#6463,1.); +#6463 = DIRECTION('',(1.,5.415722071342E-16)); +#6464 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6465 = PCURVE('',#6466,#6471); +#6466 = PLANE('',#6467); +#6467 = AXIS2_PLACEMENT_3D('',#6468,#6469,#6470); +#6468 = CARTESIAN_POINT('',(-1.8,-2.745,0.825)); +#6469 = DIRECTION('',(0.,0.,1.)); +#6470 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#6471 = DEFINITIONAL_REPRESENTATION('',(#6472),#6476); +#6472 = LINE('',#6473,#6474); +#6473 = CARTESIAN_POINT('',(0.15,1.43)); +#6474 = VECTOR('',#6475,1.); +#6475 = DIRECTION('',(1.224646799147E-16,-1.)); +#6476 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6477 = ORIENTED_EDGE('',*,*,#6478,.F.); +#6478 = EDGE_CURVE('',#6479,#6451,#6481,.T.); +#6479 = VERTEX_POINT('',#6480); +#6480 = CARTESIAN_POINT('',(-1.95,-3.605,0.825)); +#6481 = SURFACE_CURVE('',#6482,(#6486,#6493),.PCURVE_S1.); +#6482 = LINE('',#6483,#6484); +#6483 = CARTESIAN_POINT('',(-1.95,-4.175,0.825)); +#6484 = VECTOR('',#6485,1.); +#6485 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#6486 = PCURVE('',#3944,#6487); +#6487 = DEFINITIONAL_REPRESENTATION('',(#6488),#6492); +#6488 = LINE('',#6489,#6490); +#6489 = CARTESIAN_POINT('',(-1.110223024625E-16,1.)); +#6490 = VECTOR('',#6491,1.); +#6491 = DIRECTION('',(1.,0.)); +#6492 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6493 = PCURVE('',#6494,#6499); +#6494 = PLANE('',#6495); +#6495 = AXIS2_PLACEMENT_3D('',#6496,#6497,#6498); +#6496 = CARTESIAN_POINT('',(-1.95,-4.175,1.025)); +#6497 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#6498 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#6499 = DEFINITIONAL_REPRESENTATION('',(#6500),#6504); +#6500 = LINE('',#6501,#6502); +#6501 = CARTESIAN_POINT('',(0.,-0.2)); +#6502 = VECTOR('',#6503,1.); +#6503 = DIRECTION('',(1.,0.)); +#6504 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6505 = ORIENTED_EDGE('',*,*,#6506,.F.); +#6506 = EDGE_CURVE('',#6507,#6479,#6509,.T.); +#6507 = VERTEX_POINT('',#6508); +#6508 = CARTESIAN_POINT('',(-1.95,-4.015,0.825)); +#6509 = SURFACE_CURVE('',#6510,(#6514,#6521),.PCURVE_S1.); +#6510 = LINE('',#6511,#6512); +#6511 = CARTESIAN_POINT('',(-1.95,-4.175,0.825)); +#6512 = VECTOR('',#6513,1.); +#6513 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#6514 = PCURVE('',#3944,#6515); +#6515 = DEFINITIONAL_REPRESENTATION('',(#6516),#6520); +#6516 = LINE('',#6517,#6518); +#6517 = CARTESIAN_POINT('',(2.22044604925E-16,1.)); +#6518 = VECTOR('',#6519,1.); +#6519 = DIRECTION('',(1.,2.707861035671E-16)); +#6520 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6521 = PCURVE('',#6522,#6527); +#6522 = PLANE('',#6523); +#6523 = AXIS2_PLACEMENT_3D('',#6524,#6525,#6526); +#6524 = CARTESIAN_POINT('',(-1.8,-4.015,0.825)); +#6525 = DIRECTION('',(0.,0.,1.)); +#6526 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#6527 = DEFINITIONAL_REPRESENTATION('',(#6528),#6532); +#6528 = LINE('',#6529,#6530); +#6529 = CARTESIAN_POINT('',(0.15,0.16)); +#6530 = VECTOR('',#6531,1.); +#6531 = DIRECTION('',(1.224646799147E-16,-1.)); +#6532 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6533 = ORIENTED_EDGE('',*,*,#6534,.F.); +#6534 = EDGE_CURVE('',#6068,#6507,#6535,.T.); +#6535 = SURFACE_CURVE('',#6536,(#6540,#6547),.PCURVE_S1.); +#6536 = LINE('',#6537,#6538); +#6537 = CARTESIAN_POINT('',(-1.95,-4.175,0.825)); +#6538 = VECTOR('',#6539,1.); +#6539 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#6540 = PCURVE('',#3944,#6541); +#6541 = DEFINITIONAL_REPRESENTATION('',(#6542),#6546); +#6542 = LINE('',#6543,#6544); +#6543 = CARTESIAN_POINT('',(-3.483321490182E-17,1.)); +#6544 = VECTOR('',#6545,1.); +#6545 = DIRECTION('',(1.,0.)); +#6546 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6547 = PCURVE('',#6548,#6553); +#6548 = PLANE('',#6549); +#6549 = AXIS2_PLACEMENT_3D('',#6550,#6551,#6552); +#6550 = CARTESIAN_POINT('',(-1.95,-4.175,1.025)); +#6551 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#6552 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#6553 = DEFINITIONAL_REPRESENTATION('',(#6554),#6558); +#6554 = LINE('',#6555,#6556); +#6555 = CARTESIAN_POINT('',(0.,-0.2)); +#6556 = VECTOR('',#6557,1.); +#6557 = DIRECTION('',(1.,0.)); +#6558 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6559 = ORIENTED_EDGE('',*,*,#6067,.F.); +#6560 = ADVANCED_FACE('',(#6561),#3917,.F.); +#6561 = FACE_BOUND('',#6562,.F.); +#6562 = EDGE_LOOP('',(#6563,#6564,#6565,#6591)); +#6563 = ORIENTED_EDGE('',*,*,#3899,.T.); +#6564 = ORIENTED_EDGE('',*,*,#5990,.T.); +#6565 = ORIENTED_EDGE('',*,*,#6566,.F.); +#6566 = EDGE_CURVE('',#6121,#5968,#6567,.T.); +#6567 = SURFACE_CURVE('',#6568,(#6572,#6579),.PCURVE_S1.); +#6568 = LINE('',#6569,#6570); +#6569 = CARTESIAN_POINT('',(-1.95,4.175,0.825)); +#6570 = VECTOR('',#6571,1.); +#6571 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#6572 = PCURVE('',#3917,#6573); +#6573 = DEFINITIONAL_REPRESENTATION('',(#6574),#6578); +#6574 = LINE('',#6575,#6576); +#6575 = CARTESIAN_POINT('',(-2.589527758623E-16,1.)); +#6576 = VECTOR('',#6577,1.); +#6577 = DIRECTION('',(1.,8.971956906775E-16)); +#6578 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6579 = PCURVE('',#6580,#6585); +#6580 = PLANE('',#6581); +#6581 = AXIS2_PLACEMENT_3D('',#6582,#6583,#6584); +#6582 = CARTESIAN_POINT('',(-1.95,4.175,1.025)); +#6583 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#6584 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#6585 = DEFINITIONAL_REPRESENTATION('',(#6586),#6590); +#6586 = LINE('',#6587,#6588); +#6587 = CARTESIAN_POINT('',(0.,-0.2)); +#6588 = VECTOR('',#6589,1.); +#6589 = DIRECTION('',(1.,0.)); +#6590 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6591 = ORIENTED_EDGE('',*,*,#6120,.F.); +#6592 = ADVANCED_FACE('',(#6593),#4165,.F.); +#6593 = FACE_BOUND('',#6594,.F.); +#6594 = EDGE_LOOP('',(#6595,#6596,#6616,#6642)); +#6595 = ORIENTED_EDGE('',*,*,#4151,.T.); +#6596 = ORIENTED_EDGE('',*,*,#6597,.T.); +#6597 = EDGE_CURVE('',#4130,#6598,#6600,.T.); +#6598 = VERTEX_POINT('',#6599); +#6599 = CARTESIAN_POINT('',(1.775,-4.35,1.025)); +#6600 = SURFACE_CURVE('',#6601,(#6604,#6610),.PCURVE_S1.); +#6601 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6602,#6603),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#6602 = CARTESIAN_POINT('',(1.775,-4.35,0.825)); +#6603 = CARTESIAN_POINT('',(1.775,-4.35,1.025)); +#6604 = PCURVE('',#4165,#6605); +#6605 = DEFINITIONAL_REPRESENTATION('',(#6606),#6609); +#6606 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6607,#6608),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#6607 = CARTESIAN_POINT('',(0.247487373415,-0.2)); +#6608 = CARTESIAN_POINT('',(0.247487373415,0.)); +#6609 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6610 = PCURVE('',#6050,#6611); +#6611 = DEFINITIONAL_REPRESENTATION('',(#6612),#6615); +#6612 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6613,#6614),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#6613 = CARTESIAN_POINT('',(0.,-0.2)); +#6614 = CARTESIAN_POINT('',(0.,0.)); +#6615 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6616 = ORIENTED_EDGE('',*,*,#6617,.F.); +#6617 = EDGE_CURVE('',#4211,#6598,#6618,.T.); +#6618 = SURFACE_CURVE('',#6619,(#6623,#6630),.PCURVE_S1.); +#6619 = LINE('',#6620,#6621); +#6620 = CARTESIAN_POINT('',(1.95,-4.175,1.025)); +#6621 = VECTOR('',#6622,1.); +#6622 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#6623 = PCURVE('',#4165,#6624); +#6624 = DEFINITIONAL_REPRESENTATION('',(#6625),#6629); +#6625 = LINE('',#6626,#6627); +#6626 = CARTESIAN_POINT('',(0.,0.)); +#6627 = VECTOR('',#6628,1.); +#6628 = DIRECTION('',(1.,0.)); +#6629 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6630 = PCURVE('',#6631,#6636); +#6631 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#6632,#6633) + ,(#6634,#6635 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#6632 = CARTESIAN_POINT('',(1.95,-4.175,1.025)); +#6633 = CARTESIAN_POINT('',(1.875,-4.1375,1.025)); +#6634 = CARTESIAN_POINT('',(1.775,-4.35,1.025)); +#6635 = CARTESIAN_POINT('',(1.7375,-4.275,1.025)); +#6636 = DEFINITIONAL_REPRESENTATION('',(#6637),#6641); +#6637 = LINE('',#6638,#6639); +#6638 = CARTESIAN_POINT('',(8.24192440478E-16,-9.160293478888E-15)); +#6639 = VECTOR('',#6640,1.); +#6640 = DIRECTION('',(1.,2.591639481402E-14)); +#6641 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6642 = ORIENTED_EDGE('',*,*,#4210,.F.); +#6643 = ADVANCED_FACE('',(#6644),#4197,.T.); +#6644 = FACE_BOUND('',#6645,.T.); +#6645 = EDGE_LOOP('',(#6646,#6647,#6648,#6676,#6704,#6733,#6761,#6789, + #6817,#6850,#6878,#6907)); +#6646 = ORIENTED_EDGE('',*,*,#4181,.F.); +#6647 = ORIENTED_EDGE('',*,*,#4288,.T.); +#6648 = ORIENTED_EDGE('',*,*,#6649,.T.); +#6649 = EDGE_CURVE('',#4289,#6650,#6652,.T.); +#6650 = VERTEX_POINT('',#6651); +#6651 = CARTESIAN_POINT('',(2.35,-4.015,0.725)); +#6652 = SURFACE_CURVE('',#6653,(#6658,#6669),.PCURVE_S1.); +#6653 = CIRCLE('',#6654,0.1); +#6654 = AXIS2_PLACEMENT_3D('',#6655,#6656,#6657); +#6655 = CARTESIAN_POINT('',(2.25,-4.015,0.725)); +#6656 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#6657 = DIRECTION('',(4.440892098501E-15,9.860761315262E-31,1.)); +#6658 = PCURVE('',#4197,#6659); +#6659 = DEFINITIONAL_REPRESENTATION('',(#6660),#6668); +#6660 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#6661,#6662,#6663,#6664, +#6665,#6666,#6667),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#6661 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#6662 = CARTESIAN_POINT('',(0.292340342435,-7.415408746888E-03)); +#6663 = CARTESIAN_POINT('',(0.142340342435,7.918713163156E-02)); +#6664 = CARTESIAN_POINT('',(-7.659657565E-03,0.16578967201)); +#6665 = CARTESIAN_POINT('',(0.142340342435,0.252392212388)); +#6666 = CARTESIAN_POINT('',(0.292340342435,0.338994752767)); +#6667 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#6668 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6669 = PCURVE('',#4325,#6670); +#6670 = DEFINITIONAL_REPRESENTATION('',(#6671),#6675); +#6671 = LINE('',#6672,#6673); +#6672 = CARTESIAN_POINT('',(0.,-0.41)); +#6673 = VECTOR('',#6674,1.); +#6674 = DIRECTION('',(1.,0.)); +#6675 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6676 = ORIENTED_EDGE('',*,*,#6677,.T.); +#6677 = EDGE_CURVE('',#6650,#6678,#6680,.T.); +#6678 = VERTEX_POINT('',#6679); +#6679 = CARTESIAN_POINT('',(2.35,-4.015,0.3)); +#6680 = SURFACE_CURVE('',#6681,(#6685,#6692),.PCURVE_S1.); +#6681 = LINE('',#6682,#6683); +#6682 = CARTESIAN_POINT('',(2.35,-4.015,0.725)); +#6683 = VECTOR('',#6684,1.); +#6684 = DIRECTION('',(1.044915787883E-15,2.320179133003E-31,-1.)); +#6685 = PCURVE('',#4197,#6686); +#6686 = DEFINITIONAL_REPRESENTATION('',(#6687),#6691); +#6687 = LINE('',#6688,#6689); +#6688 = CARTESIAN_POINT('',(0.192340342435,6.578967201E-02)); +#6689 = VECTOR('',#6690,1.); +#6690 = DIRECTION('',(-1.,-1.044915787883E-15)); +#6691 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6692 = PCURVE('',#6693,#6698); +#6693 = PLANE('',#6694); +#6694 = AXIS2_PLACEMENT_3D('',#6695,#6696,#6697); +#6695 = CARTESIAN_POINT('',(2.35,-3.605,0.725)); +#6696 = DIRECTION('',(1.,2.22044604925E-16,1.044915787883E-15)); +#6697 = DIRECTION('',(1.044915787883E-15,2.320179133003E-31,-1.)); +#6698 = DEFINITIONAL_REPRESENTATION('',(#6699),#6703); +#6699 = LINE('',#6700,#6701); +#6700 = CARTESIAN_POINT('',(-9.512734445312E-32,-0.41)); +#6701 = VECTOR('',#6702,1.); +#6702 = DIRECTION('',(1.,0.)); +#6703 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6704 = ORIENTED_EDGE('',*,*,#6705,.T.); +#6705 = EDGE_CURVE('',#6678,#6706,#6708,.T.); +#6706 = VERTEX_POINT('',#6707); +#6707 = CARTESIAN_POINT('',(2.65,-4.015,5.551115123126E-17)); +#6708 = SURFACE_CURVE('',#6709,(#6714,#6721),.PCURVE_S1.); +#6709 = CIRCLE('',#6710,0.3); +#6710 = AXIS2_PLACEMENT_3D('',#6711,#6712,#6713); +#6711 = CARTESIAN_POINT('',(2.65,-4.015,0.3)); +#6712 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#6713 = DIRECTION('',(-1.,-2.22044604925E-16,3.515706244646E-15)); +#6714 = PCURVE('',#4197,#6715); +#6715 = DEFINITIONAL_REPRESENTATION('',(#6716),#6720); +#6716 = CIRCLE('',#6717,0.3); +#6717 = AXIS2_PLACEMENT_2D('',#6718,#6719); +#6718 = CARTESIAN_POINT('',(-0.232659657565,-0.23421032799)); +#6719 = DIRECTION('',(3.515706244646E-15,1.)); +#6720 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6721 = PCURVE('',#6722,#6727); +#6722 = CYLINDRICAL_SURFACE('',#6723,0.3); +#6723 = AXIS2_PLACEMENT_3D('',#6724,#6725,#6726); +#6724 = CARTESIAN_POINT('',(2.65,-3.605,0.3)); +#6725 = DIRECTION('',(-2.22044604925E-16,1.,-0.)); +#6726 = DIRECTION('',(-1.,-2.22044604925E-16,3.515706244646E-15)); +#6727 = DEFINITIONAL_REPRESENTATION('',(#6728),#6732); +#6728 = LINE('',#6729,#6730); +#6729 = CARTESIAN_POINT('',(6.28318530718,-0.41)); +#6730 = VECTOR('',#6731,1.); +#6731 = DIRECTION('',(-1.,0.)); +#6732 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6733 = ORIENTED_EDGE('',*,*,#6734,.T.); +#6734 = EDGE_CURVE('',#6706,#6735,#6737,.T.); +#6735 = VERTEX_POINT('',#6736); +#6736 = CARTESIAN_POINT('',(3.,-4.015,5.551115123126E-17)); +#6737 = SURFACE_CURVE('',#6738,(#6742,#6749),.PCURVE_S1.); +#6738 = LINE('',#6739,#6740); +#6739 = CARTESIAN_POINT('',(2.65,-4.015,5.551115123126E-17)); +#6740 = VECTOR('',#6741,1.); +#6741 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#6742 = PCURVE('',#4197,#6743); +#6743 = DEFINITIONAL_REPRESENTATION('',(#6744),#6748); +#6744 = LINE('',#6745,#6746); +#6745 = CARTESIAN_POINT('',(-0.532659657565,-0.23421032799)); +#6746 = VECTOR('',#6747,1.); +#6747 = DIRECTION('',(0.,-1.)); +#6748 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6749 = PCURVE('',#6750,#6755); +#6750 = PLANE('',#6751); +#6751 = AXIS2_PLACEMENT_3D('',#6752,#6753,#6754); +#6752 = CARTESIAN_POINT('',(2.65,-3.605,5.551115123126E-17)); +#6753 = DIRECTION('',(0.,0.,1.)); +#6754 = DIRECTION('',(1.,2.22044604925E-16,-0.)); +#6755 = DEFINITIONAL_REPRESENTATION('',(#6756),#6760); +#6756 = LINE('',#6757,#6758); +#6757 = CARTESIAN_POINT('',(-9.103828801925E-17,-0.41)); +#6758 = VECTOR('',#6759,1.); +#6759 = DIRECTION('',(1.,0.)); +#6760 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6761 = ORIENTED_EDGE('',*,*,#6762,.T.); +#6762 = EDGE_CURVE('',#6735,#6763,#6765,.T.); +#6763 = VERTEX_POINT('',#6764); +#6764 = CARTESIAN_POINT('',(3.,-4.015,0.2)); +#6765 = SURFACE_CURVE('',#6766,(#6770,#6777),.PCURVE_S1.); +#6766 = LINE('',#6767,#6768); +#6767 = CARTESIAN_POINT('',(3.,-4.015,5.551115123126E-17)); +#6768 = VECTOR('',#6769,1.); +#6769 = DIRECTION('',(0.,0.,1.)); +#6770 = PCURVE('',#4197,#6771); +#6771 = DEFINITIONAL_REPRESENTATION('',(#6772),#6776); +#6772 = LINE('',#6773,#6774); +#6773 = CARTESIAN_POINT('',(-0.532659657565,-0.58421032799)); +#6774 = VECTOR('',#6775,1.); +#6775 = DIRECTION('',(1.,0.)); +#6776 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6777 = PCURVE('',#6778,#6783); +#6778 = PLANE('',#6779); +#6779 = AXIS2_PLACEMENT_3D('',#6780,#6781,#6782); +#6780 = CARTESIAN_POINT('',(3.,-3.605,5.551115123126E-17)); +#6781 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#6782 = DIRECTION('',(0.,0.,1.)); +#6783 = DEFINITIONAL_REPRESENTATION('',(#6784),#6788); +#6784 = LINE('',#6785,#6786); +#6785 = CARTESIAN_POINT('',(0.,-0.41)); +#6786 = VECTOR('',#6787,1.); +#6787 = DIRECTION('',(1.,0.)); +#6788 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6789 = ORIENTED_EDGE('',*,*,#6790,.T.); +#6790 = EDGE_CURVE('',#6763,#6791,#6793,.T.); +#6791 = VERTEX_POINT('',#6792); +#6792 = CARTESIAN_POINT('',(2.65,-4.015,0.2)); +#6793 = SURFACE_CURVE('',#6794,(#6798,#6805),.PCURVE_S1.); +#6794 = LINE('',#6795,#6796); +#6795 = CARTESIAN_POINT('',(3.,-4.015,0.2)); +#6796 = VECTOR('',#6797,1.); +#6797 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#6798 = PCURVE('',#4197,#6799); +#6799 = DEFINITIONAL_REPRESENTATION('',(#6800),#6804); +#6800 = LINE('',#6801,#6802); +#6801 = CARTESIAN_POINT('',(-0.332659657565,-0.58421032799)); +#6802 = VECTOR('',#6803,1.); +#6803 = DIRECTION('',(0.,1.)); +#6804 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6805 = PCURVE('',#6806,#6811); +#6806 = PLANE('',#6807); +#6807 = AXIS2_PLACEMENT_3D('',#6808,#6809,#6810); +#6808 = CARTESIAN_POINT('',(3.,-3.605,0.2)); +#6809 = DIRECTION('',(0.,0.,-1.)); +#6810 = DIRECTION('',(-1.,-2.22044604925E-16,-0.)); +#6811 = DEFINITIONAL_REPRESENTATION('',(#6812),#6816); +#6812 = LINE('',#6813,#6814); +#6813 = CARTESIAN_POINT('',(9.103828801925E-17,-0.41)); +#6814 = VECTOR('',#6815,1.); +#6815 = DIRECTION('',(1.,0.)); +#6816 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6817 = ORIENTED_EDGE('',*,*,#6818,.T.); +#6818 = EDGE_CURVE('',#6791,#6819,#6821,.T.); +#6819 = VERTEX_POINT('',#6820); +#6820 = CARTESIAN_POINT('',(2.55,-4.015,0.3)); +#6821 = SURFACE_CURVE('',#6822,(#6827,#6838),.PCURVE_S1.); +#6822 = CIRCLE('',#6823,0.1); +#6823 = AXIS2_PLACEMENT_3D('',#6824,#6825,#6826); +#6824 = CARTESIAN_POINT('',(2.65,-4.015,0.3)); +#6825 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#6826 = DIRECTION('',(0.,0.,-1.)); +#6827 = PCURVE('',#4197,#6828); +#6828 = DEFINITIONAL_REPRESENTATION('',(#6829),#6837); +#6829 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#6830,#6831,#6832,#6833, +#6834,#6835,#6836),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#6830 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#6831 = CARTESIAN_POINT('',(-0.332659657565,-6.100524723311E-02)); +#6832 = CARTESIAN_POINT('',(-0.182659657565,-0.147607787612)); +#6833 = CARTESIAN_POINT('',(-3.2659657565E-02,-0.23421032799)); +#6834 = CARTESIAN_POINT('',(-0.182659657565,-0.320812868368)); +#6835 = CARTESIAN_POINT('',(-0.332659657565,-0.407415408747)); +#6836 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#6837 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6838 = PCURVE('',#6839,#6844); +#6839 = CYLINDRICAL_SURFACE('',#6840,0.1); +#6840 = AXIS2_PLACEMENT_3D('',#6841,#6842,#6843); +#6841 = CARTESIAN_POINT('',(2.65,-3.605,0.3)); +#6842 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#6843 = DIRECTION('',(0.,0.,-1.)); +#6844 = DEFINITIONAL_REPRESENTATION('',(#6845),#6849); +#6845 = LINE('',#6846,#6847); +#6846 = CARTESIAN_POINT('',(0.,-0.41)); +#6847 = VECTOR('',#6848,1.); +#6848 = DIRECTION('',(1.,0.)); +#6849 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6850 = ORIENTED_EDGE('',*,*,#6851,.T.); +#6851 = EDGE_CURVE('',#6819,#6852,#6854,.T.); +#6852 = VERTEX_POINT('',#6853); +#6853 = CARTESIAN_POINT('',(2.55,-4.015,0.725)); +#6854 = SURFACE_CURVE('',#6855,(#6859,#6866),.PCURVE_S1.); +#6855 = LINE('',#6856,#6857); +#6856 = CARTESIAN_POINT('',(2.55,-4.015,0.3)); +#6857 = VECTOR('',#6858,1.); +#6858 = DIRECTION('',(0.,0.,1.)); +#6859 = PCURVE('',#4197,#6860); +#6860 = DEFINITIONAL_REPRESENTATION('',(#6861),#6865); +#6861 = LINE('',#6862,#6863); +#6862 = CARTESIAN_POINT('',(-0.232659657565,-0.13421032799)); +#6863 = VECTOR('',#6864,1.); +#6864 = DIRECTION('',(1.,0.)); +#6865 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6866 = PCURVE('',#6867,#6872); +#6867 = PLANE('',#6868); +#6868 = AXIS2_PLACEMENT_3D('',#6869,#6870,#6871); +#6869 = CARTESIAN_POINT('',(2.55,-3.605,0.3)); +#6870 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#6871 = DIRECTION('',(0.,0.,1.)); +#6872 = DEFINITIONAL_REPRESENTATION('',(#6873),#6877); +#6873 = LINE('',#6874,#6875); +#6874 = CARTESIAN_POINT('',(0.,-0.41)); +#6875 = VECTOR('',#6876,1.); +#6876 = DIRECTION('',(1.,0.)); +#6877 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6878 = ORIENTED_EDGE('',*,*,#6879,.T.); +#6879 = EDGE_CURVE('',#6852,#6880,#6882,.T.); +#6880 = VERTEX_POINT('',#6881); +#6881 = CARTESIAN_POINT('',(2.25,-4.015,1.025)); +#6882 = SURFACE_CURVE('',#6883,(#6888,#6895),.PCURVE_S1.); +#6883 = CIRCLE('',#6884,0.3); +#6884 = AXIS2_PLACEMENT_3D('',#6885,#6886,#6887); +#6885 = CARTESIAN_POINT('',(2.25,-4.015,0.725)); +#6886 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#6887 = DIRECTION('',(1.,2.22044604925E-16,3.700743415417E-16)); +#6888 = PCURVE('',#4197,#6889); +#6889 = DEFINITIONAL_REPRESENTATION('',(#6890),#6894); +#6890 = CIRCLE('',#6891,0.3); +#6891 = AXIS2_PLACEMENT_2D('',#6892,#6893); +#6892 = CARTESIAN_POINT('',(0.192340342435,0.16578967201)); +#6893 = DIRECTION('',(3.700743415417E-16,-1.)); +#6894 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6895 = PCURVE('',#6896,#6901); +#6896 = CYLINDRICAL_SURFACE('',#6897,0.3); +#6897 = AXIS2_PLACEMENT_3D('',#6898,#6899,#6900); +#6898 = CARTESIAN_POINT('',(2.25,-3.605,0.725)); +#6899 = DIRECTION('',(-2.22044604925E-16,1.,-0.)); +#6900 = DIRECTION('',(1.,2.22044604925E-16,3.700743415417E-16)); +#6901 = DEFINITIONAL_REPRESENTATION('',(#6902),#6906); +#6902 = LINE('',#6903,#6904); +#6903 = CARTESIAN_POINT('',(6.28318530718,-0.41)); +#6904 = VECTOR('',#6905,1.); +#6905 = DIRECTION('',(-1.,0.)); +#6906 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6907 = ORIENTED_EDGE('',*,*,#6908,.T.); +#6908 = EDGE_CURVE('',#6880,#4182,#6909,.T.); +#6909 = SURFACE_CURVE('',#6910,(#6914,#6921),.PCURVE_S1.); +#6910 = LINE('',#6911,#6912); +#6911 = CARTESIAN_POINT('',(2.25,-4.015,1.025)); +#6912 = VECTOR('',#6913,1.); +#6913 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#6914 = PCURVE('',#4197,#6915); +#6915 = DEFINITIONAL_REPRESENTATION('',(#6916),#6920); +#6916 = LINE('',#6917,#6918); +#6917 = CARTESIAN_POINT('',(0.492340342435,0.16578967201)); +#6918 = VECTOR('',#6919,1.); +#6919 = DIRECTION('',(0.,1.)); +#6920 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6921 = PCURVE('',#5538,#6922); +#6922 = DEFINITIONAL_REPRESENTATION('',(#6923),#6927); +#6923 = LINE('',#6924,#6925); +#6924 = CARTESIAN_POINT('',(9.103828801925E-17,-0.41)); +#6925 = VECTOR('',#6926,1.); +#6926 = DIRECTION('',(1.,0.)); +#6927 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6928 = ADVANCED_FACE('',(#6929),#4244,.F.); +#6929 = FACE_BOUND('',#6930,.F.); +#6930 = EDGE_LOOP('',(#6931,#6951,#6952,#6972)); +#6931 = ORIENTED_EDGE('',*,*,#6932,.F.); +#6932 = EDGE_CURVE('',#4182,#5523,#6933,.T.); +#6933 = SURFACE_CURVE('',#6934,(#6938,#6944),.PCURVE_S1.); +#6934 = LINE('',#6935,#6936); +#6935 = CARTESIAN_POINT('',(2.25,-4.015,1.025)); +#6936 = VECTOR('',#6937,1.); +#6937 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#6938 = PCURVE('',#4244,#6939); +#6939 = DEFINITIONAL_REPRESENTATION('',(#6940),#6943); +#6940 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6941,#6942),.UNSPECIFIED.,.F., + .F.,(2,2),(0.3,0.375),.PIECEWISE_BEZIER_KNOTS.); +#6941 = CARTESIAN_POINT('',(8.19,-1.633892320613E-15)); +#6942 = CARTESIAN_POINT('',(8.226389728097,1.)); +#6943 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6944 = PCURVE('',#5538,#6945); +#6945 = DEFINITIONAL_REPRESENTATION('',(#6946),#6950); +#6946 = LINE('',#6947,#6948); +#6947 = CARTESIAN_POINT('',(9.103828801925E-17,-0.41)); +#6948 = VECTOR('',#6949,1.); +#6949 = DIRECTION('',(1.,0.)); +#6950 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6951 = ORIENTED_EDGE('',*,*,#4230,.T.); +#6952 = ORIENTED_EDGE('',*,*,#6953,.T.); +#6953 = EDGE_CURVE('',#4211,#5551,#6954,.T.); +#6954 = SURFACE_CURVE('',#6955,(#6958,#6965),.PCURVE_S1.); +#6955 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#6956,#6957),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#6956 = CARTESIAN_POINT('',(1.95,-4.175,1.025)); +#6957 = CARTESIAN_POINT('',(1.875,-4.1375,1.025)); +#6958 = PCURVE('',#4244,#6959); +#6959 = DEFINITIONAL_REPRESENTATION('',(#6960),#6964); +#6960 = LINE('',#6961,#6962); +#6961 = CARTESIAN_POINT('',(8.35,1.922661875764E-15)); +#6962 = VECTOR('',#6963,1.); +#6963 = DIRECTION('',(0.,1.)); +#6964 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6965 = PCURVE('',#6631,#6966); +#6966 = DEFINITIONAL_REPRESENTATION('',(#6967),#6971); +#6967 = LINE('',#6968,#6969); +#6968 = CARTESIAN_POINT('',(8.24192440478E-16,-9.160293478888E-15)); +#6969 = VECTOR('',#6970,1.); +#6970 = DIRECTION('',(-1.789977232675E-15,1.)); +#6971 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6972 = ORIENTED_EDGE('',*,*,#5550,.F.); +#6973 = ADVANCED_FACE('',(#6974),#4275,.F.); +#6974 = FACE_BOUND('',#6975,.F.); +#6975 = EDGE_LOOP('',(#6976,#6977,#6978,#7006,#7029,#7053,#7076,#7099, + #7122,#7150,#7173,#7197)); +#6976 = ORIENTED_EDGE('',*,*,#4369,.F.); +#6977 = ORIENTED_EDGE('',*,*,#4259,.T.); +#6978 = ORIENTED_EDGE('',*,*,#6979,.T.); +#6979 = EDGE_CURVE('',#4260,#6980,#6982,.T.); +#6980 = VERTEX_POINT('',#6981); +#6981 = CARTESIAN_POINT('',(2.35,-3.605,0.725)); +#6982 = SURFACE_CURVE('',#6983,(#6988,#6999),.PCURVE_S1.); +#6983 = CIRCLE('',#6984,0.1); +#6984 = AXIS2_PLACEMENT_3D('',#6985,#6986,#6987); +#6985 = CARTESIAN_POINT('',(2.25,-3.605,0.725)); +#6986 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#6987 = DIRECTION('',(4.440892098501E-15,9.860761315262E-31,1.)); +#6988 = PCURVE('',#4275,#6989); +#6989 = DEFINITIONAL_REPRESENTATION('',(#6990),#6998); +#6990 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#6991,#6992,#6993,#6994, +#6995,#6996,#6997),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#6991 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#6992 = CARTESIAN_POINT('',(0.292340342435,-7.415408746888E-03)); +#6993 = CARTESIAN_POINT('',(0.142340342435,7.918713163156E-02)); +#6994 = CARTESIAN_POINT('',(-7.659657565E-03,0.16578967201)); +#6995 = CARTESIAN_POINT('',(0.142340342435,0.252392212388)); +#6996 = CARTESIAN_POINT('',(0.292340342435,0.338994752767)); +#6997 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#6998 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#6999 = PCURVE('',#4325,#7000); +#7000 = DEFINITIONAL_REPRESENTATION('',(#7001),#7005); +#7001 = LINE('',#7002,#7003); +#7002 = CARTESIAN_POINT('',(0.,0.)); +#7003 = VECTOR('',#7004,1.); +#7004 = DIRECTION('',(1.,0.)); +#7005 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7006 = ORIENTED_EDGE('',*,*,#7007,.T.); +#7007 = EDGE_CURVE('',#6980,#7008,#7010,.T.); +#7008 = VERTEX_POINT('',#7009); +#7009 = CARTESIAN_POINT('',(2.35,-3.605,0.3)); +#7010 = SURFACE_CURVE('',#7011,(#7015,#7022),.PCURVE_S1.); +#7011 = LINE('',#7012,#7013); +#7012 = CARTESIAN_POINT('',(2.35,-3.605,0.725)); +#7013 = VECTOR('',#7014,1.); +#7014 = DIRECTION('',(1.044915787883E-15,2.320179133003E-31,-1.)); +#7015 = PCURVE('',#4275,#7016); +#7016 = DEFINITIONAL_REPRESENTATION('',(#7017),#7021); +#7017 = LINE('',#7018,#7019); +#7018 = CARTESIAN_POINT('',(0.192340342435,6.578967201E-02)); +#7019 = VECTOR('',#7020,1.); +#7020 = DIRECTION('',(-1.,-1.044915787883E-15)); +#7021 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7022 = PCURVE('',#6693,#7023); +#7023 = DEFINITIONAL_REPRESENTATION('',(#7024),#7028); +#7024 = LINE('',#7025,#7026); +#7025 = CARTESIAN_POINT('',(0.,0.)); +#7026 = VECTOR('',#7027,1.); +#7027 = DIRECTION('',(1.,0.)); +#7028 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7029 = ORIENTED_EDGE('',*,*,#7030,.T.); +#7030 = EDGE_CURVE('',#7008,#7031,#7033,.T.); +#7031 = VERTEX_POINT('',#7032); +#7032 = CARTESIAN_POINT('',(2.65,-3.605,5.551115123126E-17)); +#7033 = SURFACE_CURVE('',#7034,(#7039,#7046),.PCURVE_S1.); +#7034 = CIRCLE('',#7035,0.3); +#7035 = AXIS2_PLACEMENT_3D('',#7036,#7037,#7038); +#7036 = CARTESIAN_POINT('',(2.65,-3.605,0.3)); +#7037 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#7038 = DIRECTION('',(-1.,-2.22044604925E-16,3.515706244646E-15)); +#7039 = PCURVE('',#4275,#7040); +#7040 = DEFINITIONAL_REPRESENTATION('',(#7041),#7045); +#7041 = CIRCLE('',#7042,0.3); +#7042 = AXIS2_PLACEMENT_2D('',#7043,#7044); +#7043 = CARTESIAN_POINT('',(-0.232659657565,-0.23421032799)); +#7044 = DIRECTION('',(3.515706244646E-15,1.)); +#7045 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7046 = PCURVE('',#6722,#7047); +#7047 = DEFINITIONAL_REPRESENTATION('',(#7048),#7052); +#7048 = LINE('',#7049,#7050); +#7049 = CARTESIAN_POINT('',(6.28318530718,0.)); +#7050 = VECTOR('',#7051,1.); +#7051 = DIRECTION('',(-1.,0.)); +#7052 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7053 = ORIENTED_EDGE('',*,*,#7054,.T.); +#7054 = EDGE_CURVE('',#7031,#7055,#7057,.T.); +#7055 = VERTEX_POINT('',#7056); +#7056 = CARTESIAN_POINT('',(3.,-3.605,5.551115123126E-17)); +#7057 = SURFACE_CURVE('',#7058,(#7062,#7069),.PCURVE_S1.); +#7058 = LINE('',#7059,#7060); +#7059 = CARTESIAN_POINT('',(2.65,-3.605,5.551115123126E-17)); +#7060 = VECTOR('',#7061,1.); +#7061 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#7062 = PCURVE('',#4275,#7063); +#7063 = DEFINITIONAL_REPRESENTATION('',(#7064),#7068); +#7064 = LINE('',#7065,#7066); +#7065 = CARTESIAN_POINT('',(-0.532659657565,-0.23421032799)); +#7066 = VECTOR('',#7067,1.); +#7067 = DIRECTION('',(0.,-1.)); +#7068 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7069 = PCURVE('',#6750,#7070); +#7070 = DEFINITIONAL_REPRESENTATION('',(#7071),#7075); +#7071 = LINE('',#7072,#7073); +#7072 = CARTESIAN_POINT('',(0.,0.)); +#7073 = VECTOR('',#7074,1.); +#7074 = DIRECTION('',(1.,0.)); +#7075 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7076 = ORIENTED_EDGE('',*,*,#7077,.T.); +#7077 = EDGE_CURVE('',#7055,#7078,#7080,.T.); +#7078 = VERTEX_POINT('',#7079); +#7079 = CARTESIAN_POINT('',(3.,-3.605,0.2)); +#7080 = SURFACE_CURVE('',#7081,(#7085,#7092),.PCURVE_S1.); +#7081 = LINE('',#7082,#7083); +#7082 = CARTESIAN_POINT('',(3.,-3.605,5.551115123126E-17)); +#7083 = VECTOR('',#7084,1.); +#7084 = DIRECTION('',(0.,0.,1.)); +#7085 = PCURVE('',#4275,#7086); +#7086 = DEFINITIONAL_REPRESENTATION('',(#7087),#7091); +#7087 = LINE('',#7088,#7089); +#7088 = CARTESIAN_POINT('',(-0.532659657565,-0.58421032799)); +#7089 = VECTOR('',#7090,1.); +#7090 = DIRECTION('',(1.,0.)); +#7091 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7092 = PCURVE('',#6778,#7093); +#7093 = DEFINITIONAL_REPRESENTATION('',(#7094),#7098); +#7094 = LINE('',#7095,#7096); +#7095 = CARTESIAN_POINT('',(0.,0.)); +#7096 = VECTOR('',#7097,1.); +#7097 = DIRECTION('',(1.,0.)); +#7098 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7099 = ORIENTED_EDGE('',*,*,#7100,.T.); +#7100 = EDGE_CURVE('',#7078,#7101,#7103,.T.); +#7101 = VERTEX_POINT('',#7102); +#7102 = CARTESIAN_POINT('',(2.65,-3.605,0.2)); +#7103 = SURFACE_CURVE('',#7104,(#7108,#7115),.PCURVE_S1.); +#7104 = LINE('',#7105,#7106); +#7105 = CARTESIAN_POINT('',(3.,-3.605,0.2)); +#7106 = VECTOR('',#7107,1.); +#7107 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#7108 = PCURVE('',#4275,#7109); +#7109 = DEFINITIONAL_REPRESENTATION('',(#7110),#7114); +#7110 = LINE('',#7111,#7112); +#7111 = CARTESIAN_POINT('',(-0.332659657565,-0.58421032799)); +#7112 = VECTOR('',#7113,1.); +#7113 = DIRECTION('',(0.,1.)); +#7114 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7115 = PCURVE('',#6806,#7116); +#7116 = DEFINITIONAL_REPRESENTATION('',(#7117),#7121); +#7117 = LINE('',#7118,#7119); +#7118 = CARTESIAN_POINT('',(-0.,0.)); +#7119 = VECTOR('',#7120,1.); +#7120 = DIRECTION('',(1.,0.)); +#7121 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7122 = ORIENTED_EDGE('',*,*,#7123,.T.); +#7123 = EDGE_CURVE('',#7101,#7124,#7126,.T.); +#7124 = VERTEX_POINT('',#7125); +#7125 = CARTESIAN_POINT('',(2.55,-3.605,0.3)); +#7126 = SURFACE_CURVE('',#7127,(#7132,#7143),.PCURVE_S1.); +#7127 = CIRCLE('',#7128,0.1); +#7128 = AXIS2_PLACEMENT_3D('',#7129,#7130,#7131); +#7129 = CARTESIAN_POINT('',(2.65,-3.605,0.3)); +#7130 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#7131 = DIRECTION('',(0.,0.,-1.)); +#7132 = PCURVE('',#4275,#7133); +#7133 = DEFINITIONAL_REPRESENTATION('',(#7134),#7142); +#7134 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#7135,#7136,#7137,#7138, +#7139,#7140,#7141),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#7135 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#7136 = CARTESIAN_POINT('',(-0.332659657565,-6.100524723311E-02)); +#7137 = CARTESIAN_POINT('',(-0.182659657565,-0.147607787612)); +#7138 = CARTESIAN_POINT('',(-3.2659657565E-02,-0.23421032799)); +#7139 = CARTESIAN_POINT('',(-0.182659657565,-0.320812868368)); +#7140 = CARTESIAN_POINT('',(-0.332659657565,-0.407415408747)); +#7141 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#7142 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7143 = PCURVE('',#6839,#7144); +#7144 = DEFINITIONAL_REPRESENTATION('',(#7145),#7149); +#7145 = LINE('',#7146,#7147); +#7146 = CARTESIAN_POINT('',(0.,0.)); +#7147 = VECTOR('',#7148,1.); +#7148 = DIRECTION('',(1.,0.)); +#7149 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7150 = ORIENTED_EDGE('',*,*,#7151,.T.); +#7151 = EDGE_CURVE('',#7124,#7152,#7154,.T.); +#7152 = VERTEX_POINT('',#7153); +#7153 = CARTESIAN_POINT('',(2.55,-3.605,0.725)); +#7154 = SURFACE_CURVE('',#7155,(#7159,#7166),.PCURVE_S1.); +#7155 = LINE('',#7156,#7157); +#7156 = CARTESIAN_POINT('',(2.55,-3.605,0.3)); +#7157 = VECTOR('',#7158,1.); +#7158 = DIRECTION('',(0.,0.,1.)); +#7159 = PCURVE('',#4275,#7160); +#7160 = DEFINITIONAL_REPRESENTATION('',(#7161),#7165); +#7161 = LINE('',#7162,#7163); +#7162 = CARTESIAN_POINT('',(-0.232659657565,-0.13421032799)); +#7163 = VECTOR('',#7164,1.); +#7164 = DIRECTION('',(1.,0.)); +#7165 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7166 = PCURVE('',#6867,#7167); +#7167 = DEFINITIONAL_REPRESENTATION('',(#7168),#7172); +#7168 = LINE('',#7169,#7170); +#7169 = CARTESIAN_POINT('',(0.,0.)); +#7170 = VECTOR('',#7171,1.); +#7171 = DIRECTION('',(1.,0.)); +#7172 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7173 = ORIENTED_EDGE('',*,*,#7174,.T.); +#7174 = EDGE_CURVE('',#7152,#7175,#7177,.T.); +#7175 = VERTEX_POINT('',#7176); +#7176 = CARTESIAN_POINT('',(2.25,-3.605,1.025)); +#7177 = SURFACE_CURVE('',#7178,(#7183,#7190),.PCURVE_S1.); +#7178 = CIRCLE('',#7179,0.3); +#7179 = AXIS2_PLACEMENT_3D('',#7180,#7181,#7182); +#7180 = CARTESIAN_POINT('',(2.25,-3.605,0.725)); +#7181 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#7182 = DIRECTION('',(1.,2.22044604925E-16,3.700743415417E-16)); +#7183 = PCURVE('',#4275,#7184); +#7184 = DEFINITIONAL_REPRESENTATION('',(#7185),#7189); +#7185 = CIRCLE('',#7186,0.3); +#7186 = AXIS2_PLACEMENT_2D('',#7187,#7188); +#7187 = CARTESIAN_POINT('',(0.192340342435,0.16578967201)); +#7188 = DIRECTION('',(3.700743415417E-16,-1.)); +#7189 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7190 = PCURVE('',#6896,#7191); +#7191 = DEFINITIONAL_REPRESENTATION('',(#7192),#7196); +#7192 = LINE('',#7193,#7194); +#7193 = CARTESIAN_POINT('',(6.28318530718,0.)); +#7194 = VECTOR('',#7195,1.); +#7195 = DIRECTION('',(-1.,0.)); +#7196 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7197 = ORIENTED_EDGE('',*,*,#7198,.T.); +#7198 = EDGE_CURVE('',#7175,#4370,#7199,.T.); +#7199 = SURFACE_CURVE('',#7200,(#7204,#7211),.PCURVE_S1.); +#7200 = LINE('',#7201,#7202); +#7201 = CARTESIAN_POINT('',(2.25,-3.605,1.025)); +#7202 = VECTOR('',#7203,1.); +#7203 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#7204 = PCURVE('',#4275,#7205); +#7205 = DEFINITIONAL_REPRESENTATION('',(#7206),#7210); +#7206 = LINE('',#7207,#7208); +#7207 = CARTESIAN_POINT('',(0.492340342435,0.16578967201)); +#7208 = VECTOR('',#7209,1.); +#7209 = DIRECTION('',(0.,1.)); +#7210 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7211 = PCURVE('',#5538,#7212); +#7212 = DEFINITIONAL_REPRESENTATION('',(#7213),#7217); +#7213 = LINE('',#7214,#7215); +#7214 = CARTESIAN_POINT('',(-0.,0.)); +#7215 = VECTOR('',#7216,1.); +#7216 = DIRECTION('',(1.,0.)); +#7217 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7218 = ADVANCED_FACE('',(#7219),#4325,.F.); +#7219 = FACE_BOUND('',#7220,.F.); +#7220 = EDGE_LOOP('',(#7221,#7222,#7223,#7244)); +#7221 = ORIENTED_EDGE('',*,*,#4311,.T.); +#7222 = ORIENTED_EDGE('',*,*,#6649,.T.); +#7223 = ORIENTED_EDGE('',*,*,#7224,.F.); +#7224 = EDGE_CURVE('',#6980,#6650,#7225,.T.); +#7225 = SURFACE_CURVE('',#7226,(#7230,#7237),.PCURVE_S1.); +#7226 = LINE('',#7227,#7228); +#7227 = CARTESIAN_POINT('',(2.35,-3.605,0.725)); +#7228 = VECTOR('',#7229,1.); +#7229 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#7230 = PCURVE('',#4325,#7231); +#7231 = DEFINITIONAL_REPRESENTATION('',(#7232),#7236); +#7232 = LINE('',#7233,#7234); +#7233 = CARTESIAN_POINT('',(1.570796326795,0.)); +#7234 = VECTOR('',#7235,1.); +#7235 = DIRECTION('',(0.,-1.)); +#7236 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7237 = PCURVE('',#6693,#7238); +#7238 = DEFINITIONAL_REPRESENTATION('',(#7239),#7243); +#7239 = LINE('',#7240,#7241); +#7240 = CARTESIAN_POINT('',(0.,0.)); +#7241 = VECTOR('',#7242,1.); +#7242 = DIRECTION('',(7.584527938158E-44,-1.)); +#7243 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7244 = ORIENTED_EDGE('',*,*,#6979,.F.); +#7245 = ADVANCED_FACE('',(#7246),#4356,.T.); +#7246 = FACE_BOUND('',#7247,.T.); +#7247 = EDGE_LOOP('',(#7248,#7249,#7250,#7278,#7306,#7335,#7363,#7391, + #7419,#7452,#7480,#7509)); +#7248 = ORIENTED_EDGE('',*,*,#4340,.F.); +#7249 = ORIENTED_EDGE('',*,*,#4531,.T.); +#7250 = ORIENTED_EDGE('',*,*,#7251,.T.); +#7251 = EDGE_CURVE('',#4532,#7252,#7254,.T.); +#7252 = VERTEX_POINT('',#7253); +#7253 = CARTESIAN_POINT('',(2.35,-2.745,0.725)); +#7254 = SURFACE_CURVE('',#7255,(#7260,#7271),.PCURVE_S1.); +#7255 = CIRCLE('',#7256,0.1); +#7256 = AXIS2_PLACEMENT_3D('',#7257,#7258,#7259); +#7257 = CARTESIAN_POINT('',(2.25,-2.745,0.725)); +#7258 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#7259 = DIRECTION('',(4.440892098501E-15,9.860761315262E-31,1.)); +#7260 = PCURVE('',#4356,#7261); +#7261 = DEFINITIONAL_REPRESENTATION('',(#7262),#7270); +#7262 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#7263,#7264,#7265,#7266, +#7267,#7268,#7269),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#7263 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#7264 = CARTESIAN_POINT('',(0.292340342435,-7.415408746888E-03)); +#7265 = CARTESIAN_POINT('',(0.142340342435,7.918713163156E-02)); +#7266 = CARTESIAN_POINT('',(-7.659657565E-03,0.16578967201)); +#7267 = CARTESIAN_POINT('',(0.142340342435,0.252392212388)); +#7268 = CARTESIAN_POINT('',(0.292340342435,0.338994752767)); +#7269 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#7270 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7271 = PCURVE('',#4568,#7272); +#7272 = DEFINITIONAL_REPRESENTATION('',(#7273),#7277); +#7273 = LINE('',#7274,#7275); +#7274 = CARTESIAN_POINT('',(0.,-0.41)); +#7275 = VECTOR('',#7276,1.); +#7276 = DIRECTION('',(1.,0.)); +#7277 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7278 = ORIENTED_EDGE('',*,*,#7279,.T.); +#7279 = EDGE_CURVE('',#7252,#7280,#7282,.T.); +#7280 = VERTEX_POINT('',#7281); +#7281 = CARTESIAN_POINT('',(2.35,-2.745,0.3)); +#7282 = SURFACE_CURVE('',#7283,(#7287,#7294),.PCURVE_S1.); +#7283 = LINE('',#7284,#7285); +#7284 = CARTESIAN_POINT('',(2.35,-2.745,0.725)); +#7285 = VECTOR('',#7286,1.); +#7286 = DIRECTION('',(1.044915787883E-15,2.320179133003E-31,-1.)); +#7287 = PCURVE('',#4356,#7288); +#7288 = DEFINITIONAL_REPRESENTATION('',(#7289),#7293); +#7289 = LINE('',#7290,#7291); +#7290 = CARTESIAN_POINT('',(0.192340342435,6.578967201E-02)); +#7291 = VECTOR('',#7292,1.); +#7292 = DIRECTION('',(-1.,-1.044915787883E-15)); +#7293 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7294 = PCURVE('',#7295,#7300); +#7295 = PLANE('',#7296); +#7296 = AXIS2_PLACEMENT_3D('',#7297,#7298,#7299); +#7297 = CARTESIAN_POINT('',(2.35,-2.335,0.725)); +#7298 = DIRECTION('',(1.,2.22044604925E-16,1.044915787883E-15)); +#7299 = DIRECTION('',(1.044915787883E-15,2.320179133003E-31,-1.)); +#7300 = DEFINITIONAL_REPRESENTATION('',(#7301),#7305); +#7301 = LINE('',#7302,#7303); +#7302 = CARTESIAN_POINT('',(-9.512734445312E-32,-0.41)); +#7303 = VECTOR('',#7304,1.); +#7304 = DIRECTION('',(1.,0.)); +#7305 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7306 = ORIENTED_EDGE('',*,*,#7307,.T.); +#7307 = EDGE_CURVE('',#7280,#7308,#7310,.T.); +#7308 = VERTEX_POINT('',#7309); +#7309 = CARTESIAN_POINT('',(2.65,-2.745,5.551115123126E-17)); +#7310 = SURFACE_CURVE('',#7311,(#7316,#7323),.PCURVE_S1.); +#7311 = CIRCLE('',#7312,0.3); +#7312 = AXIS2_PLACEMENT_3D('',#7313,#7314,#7315); +#7313 = CARTESIAN_POINT('',(2.65,-2.745,0.3)); +#7314 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#7315 = DIRECTION('',(-1.,-2.22044604925E-16,3.515706244646E-15)); +#7316 = PCURVE('',#4356,#7317); +#7317 = DEFINITIONAL_REPRESENTATION('',(#7318),#7322); +#7318 = CIRCLE('',#7319,0.3); +#7319 = AXIS2_PLACEMENT_2D('',#7320,#7321); +#7320 = CARTESIAN_POINT('',(-0.232659657565,-0.23421032799)); +#7321 = DIRECTION('',(3.515706244646E-15,1.)); +#7322 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7323 = PCURVE('',#7324,#7329); +#7324 = CYLINDRICAL_SURFACE('',#7325,0.3); +#7325 = AXIS2_PLACEMENT_3D('',#7326,#7327,#7328); +#7326 = CARTESIAN_POINT('',(2.65,-2.335,0.3)); +#7327 = DIRECTION('',(-2.22044604925E-16,1.,-0.)); +#7328 = DIRECTION('',(-1.,-2.22044604925E-16,3.515706244646E-15)); +#7329 = DEFINITIONAL_REPRESENTATION('',(#7330),#7334); +#7330 = LINE('',#7331,#7332); +#7331 = CARTESIAN_POINT('',(6.28318530718,-0.41)); +#7332 = VECTOR('',#7333,1.); +#7333 = DIRECTION('',(-1.,0.)); +#7334 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7335 = ORIENTED_EDGE('',*,*,#7336,.T.); +#7336 = EDGE_CURVE('',#7308,#7337,#7339,.T.); +#7337 = VERTEX_POINT('',#7338); +#7338 = CARTESIAN_POINT('',(3.,-2.745,5.551115123126E-17)); +#7339 = SURFACE_CURVE('',#7340,(#7344,#7351),.PCURVE_S1.); +#7340 = LINE('',#7341,#7342); +#7341 = CARTESIAN_POINT('',(2.65,-2.745,5.551115123126E-17)); +#7342 = VECTOR('',#7343,1.); +#7343 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#7344 = PCURVE('',#4356,#7345); +#7345 = DEFINITIONAL_REPRESENTATION('',(#7346),#7350); +#7346 = LINE('',#7347,#7348); +#7347 = CARTESIAN_POINT('',(-0.532659657565,-0.23421032799)); +#7348 = VECTOR('',#7349,1.); +#7349 = DIRECTION('',(0.,-1.)); +#7350 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7351 = PCURVE('',#7352,#7357); +#7352 = PLANE('',#7353); +#7353 = AXIS2_PLACEMENT_3D('',#7354,#7355,#7356); +#7354 = CARTESIAN_POINT('',(2.65,-2.335,5.551115123126E-17)); +#7355 = DIRECTION('',(0.,0.,1.)); +#7356 = DIRECTION('',(1.,2.22044604925E-16,-0.)); +#7357 = DEFINITIONAL_REPRESENTATION('',(#7358),#7362); +#7358 = LINE('',#7359,#7360); +#7359 = CARTESIAN_POINT('',(-9.103828801925E-17,-0.41)); +#7360 = VECTOR('',#7361,1.); +#7361 = DIRECTION('',(1.,0.)); +#7362 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7363 = ORIENTED_EDGE('',*,*,#7364,.T.); +#7364 = EDGE_CURVE('',#7337,#7365,#7367,.T.); +#7365 = VERTEX_POINT('',#7366); +#7366 = CARTESIAN_POINT('',(3.,-2.745,0.2)); +#7367 = SURFACE_CURVE('',#7368,(#7372,#7379),.PCURVE_S1.); +#7368 = LINE('',#7369,#7370); +#7369 = CARTESIAN_POINT('',(3.,-2.745,5.551115123126E-17)); +#7370 = VECTOR('',#7371,1.); +#7371 = DIRECTION('',(0.,0.,1.)); +#7372 = PCURVE('',#4356,#7373); +#7373 = DEFINITIONAL_REPRESENTATION('',(#7374),#7378); +#7374 = LINE('',#7375,#7376); +#7375 = CARTESIAN_POINT('',(-0.532659657565,-0.58421032799)); +#7376 = VECTOR('',#7377,1.); +#7377 = DIRECTION('',(1.,0.)); +#7378 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7379 = PCURVE('',#7380,#7385); +#7380 = PLANE('',#7381); +#7381 = AXIS2_PLACEMENT_3D('',#7382,#7383,#7384); +#7382 = CARTESIAN_POINT('',(3.,-2.335,5.551115123126E-17)); +#7383 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#7384 = DIRECTION('',(0.,0.,1.)); +#7385 = DEFINITIONAL_REPRESENTATION('',(#7386),#7390); +#7386 = LINE('',#7387,#7388); +#7387 = CARTESIAN_POINT('',(0.,-0.41)); +#7388 = VECTOR('',#7389,1.); +#7389 = DIRECTION('',(1.,0.)); +#7390 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7391 = ORIENTED_EDGE('',*,*,#7392,.T.); +#7392 = EDGE_CURVE('',#7365,#7393,#7395,.T.); +#7393 = VERTEX_POINT('',#7394); +#7394 = CARTESIAN_POINT('',(2.65,-2.745,0.2)); +#7395 = SURFACE_CURVE('',#7396,(#7400,#7407),.PCURVE_S1.); +#7396 = LINE('',#7397,#7398); +#7397 = CARTESIAN_POINT('',(3.,-2.745,0.2)); +#7398 = VECTOR('',#7399,1.); +#7399 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#7400 = PCURVE('',#4356,#7401); +#7401 = DEFINITIONAL_REPRESENTATION('',(#7402),#7406); +#7402 = LINE('',#7403,#7404); +#7403 = CARTESIAN_POINT('',(-0.332659657565,-0.58421032799)); +#7404 = VECTOR('',#7405,1.); +#7405 = DIRECTION('',(0.,1.)); +#7406 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7407 = PCURVE('',#7408,#7413); +#7408 = PLANE('',#7409); +#7409 = AXIS2_PLACEMENT_3D('',#7410,#7411,#7412); +#7410 = CARTESIAN_POINT('',(3.,-2.335,0.2)); +#7411 = DIRECTION('',(0.,0.,-1.)); +#7412 = DIRECTION('',(-1.,-2.22044604925E-16,-0.)); +#7413 = DEFINITIONAL_REPRESENTATION('',(#7414),#7418); +#7414 = LINE('',#7415,#7416); +#7415 = CARTESIAN_POINT('',(9.103828801925E-17,-0.41)); +#7416 = VECTOR('',#7417,1.); +#7417 = DIRECTION('',(1.,0.)); +#7418 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7419 = ORIENTED_EDGE('',*,*,#7420,.T.); +#7420 = EDGE_CURVE('',#7393,#7421,#7423,.T.); +#7421 = VERTEX_POINT('',#7422); +#7422 = CARTESIAN_POINT('',(2.55,-2.745,0.3)); +#7423 = SURFACE_CURVE('',#7424,(#7429,#7440),.PCURVE_S1.); +#7424 = CIRCLE('',#7425,0.1); +#7425 = AXIS2_PLACEMENT_3D('',#7426,#7427,#7428); +#7426 = CARTESIAN_POINT('',(2.65,-2.745,0.3)); +#7427 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#7428 = DIRECTION('',(0.,0.,-1.)); +#7429 = PCURVE('',#4356,#7430); +#7430 = DEFINITIONAL_REPRESENTATION('',(#7431),#7439); +#7431 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#7432,#7433,#7434,#7435, +#7436,#7437,#7438),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#7432 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#7433 = CARTESIAN_POINT('',(-0.332659657565,-6.100524723311E-02)); +#7434 = CARTESIAN_POINT('',(-0.182659657565,-0.147607787612)); +#7435 = CARTESIAN_POINT('',(-3.2659657565E-02,-0.23421032799)); +#7436 = CARTESIAN_POINT('',(-0.182659657565,-0.320812868368)); +#7437 = CARTESIAN_POINT('',(-0.332659657565,-0.407415408747)); +#7438 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#7439 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7440 = PCURVE('',#7441,#7446); +#7441 = CYLINDRICAL_SURFACE('',#7442,0.1); +#7442 = AXIS2_PLACEMENT_3D('',#7443,#7444,#7445); +#7443 = CARTESIAN_POINT('',(2.65,-2.335,0.3)); +#7444 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#7445 = DIRECTION('',(0.,0.,-1.)); +#7446 = DEFINITIONAL_REPRESENTATION('',(#7447),#7451); +#7447 = LINE('',#7448,#7449); +#7448 = CARTESIAN_POINT('',(0.,-0.41)); +#7449 = VECTOR('',#7450,1.); +#7450 = DIRECTION('',(1.,0.)); +#7451 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7452 = ORIENTED_EDGE('',*,*,#7453,.T.); +#7453 = EDGE_CURVE('',#7421,#7454,#7456,.T.); +#7454 = VERTEX_POINT('',#7455); +#7455 = CARTESIAN_POINT('',(2.55,-2.745,0.725)); +#7456 = SURFACE_CURVE('',#7457,(#7461,#7468),.PCURVE_S1.); +#7457 = LINE('',#7458,#7459); +#7458 = CARTESIAN_POINT('',(2.55,-2.745,0.3)); +#7459 = VECTOR('',#7460,1.); +#7460 = DIRECTION('',(0.,0.,1.)); +#7461 = PCURVE('',#4356,#7462); +#7462 = DEFINITIONAL_REPRESENTATION('',(#7463),#7467); +#7463 = LINE('',#7464,#7465); +#7464 = CARTESIAN_POINT('',(-0.232659657565,-0.13421032799)); +#7465 = VECTOR('',#7466,1.); +#7466 = DIRECTION('',(1.,0.)); +#7467 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7468 = PCURVE('',#7469,#7474); +#7469 = PLANE('',#7470); +#7470 = AXIS2_PLACEMENT_3D('',#7471,#7472,#7473); +#7471 = CARTESIAN_POINT('',(2.55,-2.335,0.3)); +#7472 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#7473 = DIRECTION('',(0.,0.,1.)); +#7474 = DEFINITIONAL_REPRESENTATION('',(#7475),#7479); +#7475 = LINE('',#7476,#7477); +#7476 = CARTESIAN_POINT('',(0.,-0.41)); +#7477 = VECTOR('',#7478,1.); +#7478 = DIRECTION('',(1.,0.)); +#7479 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7480 = ORIENTED_EDGE('',*,*,#7481,.T.); +#7481 = EDGE_CURVE('',#7454,#7482,#7484,.T.); +#7482 = VERTEX_POINT('',#7483); +#7483 = CARTESIAN_POINT('',(2.25,-2.745,1.025)); +#7484 = SURFACE_CURVE('',#7485,(#7490,#7497),.PCURVE_S1.); +#7485 = CIRCLE('',#7486,0.3); +#7486 = AXIS2_PLACEMENT_3D('',#7487,#7488,#7489); +#7487 = CARTESIAN_POINT('',(2.25,-2.745,0.725)); +#7488 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#7489 = DIRECTION('',(1.,2.22044604925E-16,3.700743415417E-16)); +#7490 = PCURVE('',#4356,#7491); +#7491 = DEFINITIONAL_REPRESENTATION('',(#7492),#7496); +#7492 = CIRCLE('',#7493,0.3); +#7493 = AXIS2_PLACEMENT_2D('',#7494,#7495); +#7494 = CARTESIAN_POINT('',(0.192340342435,0.16578967201)); +#7495 = DIRECTION('',(3.700743415417E-16,-1.)); +#7496 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7497 = PCURVE('',#7498,#7503); +#7498 = CYLINDRICAL_SURFACE('',#7499,0.3); +#7499 = AXIS2_PLACEMENT_3D('',#7500,#7501,#7502); +#7500 = CARTESIAN_POINT('',(2.25,-2.335,0.725)); +#7501 = DIRECTION('',(-2.22044604925E-16,1.,-0.)); +#7502 = DIRECTION('',(1.,2.22044604925E-16,3.700743415417E-16)); +#7503 = DEFINITIONAL_REPRESENTATION('',(#7504),#7508); +#7504 = LINE('',#7505,#7506); +#7505 = CARTESIAN_POINT('',(6.28318530718,-0.41)); +#7506 = VECTOR('',#7507,1.); +#7507 = DIRECTION('',(-1.,0.)); +#7508 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7509 = ORIENTED_EDGE('',*,*,#7510,.T.); +#7510 = EDGE_CURVE('',#7482,#4341,#7511,.T.); +#7511 = SURFACE_CURVE('',#7512,(#7516,#7523),.PCURVE_S1.); +#7512 = LINE('',#7513,#7514); +#7513 = CARTESIAN_POINT('',(2.25,-2.745,1.025)); +#7514 = VECTOR('',#7515,1.); +#7515 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#7516 = PCURVE('',#4356,#7517); +#7517 = DEFINITIONAL_REPRESENTATION('',(#7518),#7522); +#7518 = LINE('',#7519,#7520); +#7519 = CARTESIAN_POINT('',(0.492340342435,0.16578967201)); +#7520 = VECTOR('',#7521,1.); +#7521 = DIRECTION('',(0.,1.)); +#7522 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7523 = PCURVE('',#5488,#7524); +#7524 = DEFINITIONAL_REPRESENTATION('',(#7525),#7529); +#7525 = LINE('',#7526,#7527); +#7526 = CARTESIAN_POINT('',(9.103828801925E-17,-0.41)); +#7527 = VECTOR('',#7528,1.); +#7528 = DIRECTION('',(1.,0.)); +#7529 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7530 = ADVANCED_FACE('',(#7531),#4406,.F.); +#7531 = FACE_BOUND('',#7532,.F.); +#7532 = EDGE_LOOP('',(#7533,#7553,#7554,#7574)); +#7533 = ORIENTED_EDGE('',*,*,#7534,.F.); +#7534 = EDGE_CURVE('',#4341,#5473,#7535,.T.); +#7535 = SURFACE_CURVE('',#7536,(#7540,#7546),.PCURVE_S1.); +#7536 = LINE('',#7537,#7538); +#7537 = CARTESIAN_POINT('',(2.25,-2.745,1.025)); +#7538 = VECTOR('',#7539,1.); +#7539 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#7540 = PCURVE('',#4406,#7541); +#7541 = DEFINITIONAL_REPRESENTATION('',(#7542),#7545); +#7542 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7543,#7544),.UNSPECIFIED.,.F., + .F.,(2,2),(0.3,0.375),.PIECEWISE_BEZIER_KNOTS.); +#7543 = CARTESIAN_POINT('',(6.92,-5.079790098097E-16)); +#7544 = CARTESIAN_POINT('',(6.944879154079,1.)); +#7545 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7546 = PCURVE('',#5488,#7547); +#7547 = DEFINITIONAL_REPRESENTATION('',(#7548),#7552); +#7548 = LINE('',#7549,#7550); +#7549 = CARTESIAN_POINT('',(9.103828801925E-17,-0.41)); +#7550 = VECTOR('',#7551,1.); +#7551 = DIRECTION('',(1.,0.)); +#7552 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7553 = ORIENTED_EDGE('',*,*,#4392,.T.); +#7554 = ORIENTED_EDGE('',*,*,#7555,.T.); +#7555 = EDGE_CURVE('',#4370,#5501,#7556,.T.); +#7556 = SURFACE_CURVE('',#7557,(#7561,#7567),.PCURVE_S1.); +#7557 = LINE('',#7558,#7559); +#7558 = CARTESIAN_POINT('',(2.25,-3.605,1.025)); +#7559 = VECTOR('',#7560,1.); +#7560 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#7561 = PCURVE('',#4406,#7562); +#7562 = DEFINITIONAL_REPRESENTATION('',(#7563),#7566); +#7563 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#7564,#7565),.UNSPECIFIED.,.F., + .F.,(2,2),(0.3,0.375),.PIECEWISE_BEZIER_KNOTS.); +#7564 = CARTESIAN_POINT('',(7.78,9.121489402054E-16)); +#7565 = CARTESIAN_POINT('',(7.812673716012,1.)); +#7566 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7567 = PCURVE('',#5538,#7568); +#7568 = DEFINITIONAL_REPRESENTATION('',(#7569),#7573); +#7569 = LINE('',#7570,#7571); +#7570 = CARTESIAN_POINT('',(-0.,0.)); +#7571 = VECTOR('',#7572,1.); +#7572 = DIRECTION('',(1.,0.)); +#7573 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7574 = ORIENTED_EDGE('',*,*,#5500,.F.); +#7575 = ADVANCED_FACE('',(#7576),#4487,.F.); +#7576 = FACE_BOUND('',#7577,.F.); +#7577 = EDGE_LOOP('',(#7578,#7579,#7607,#7628)); +#7578 = ORIENTED_EDGE('',*,*,#4473,.T.); +#7579 = ORIENTED_EDGE('',*,*,#7580,.T.); +#7580 = EDGE_CURVE('',#4446,#7581,#7583,.T.); +#7581 = VERTEX_POINT('',#7582); +#7582 = CARTESIAN_POINT('',(2.35,2.335,0.725)); +#7583 = SURFACE_CURVE('',#7584,(#7589,#7596),.PCURVE_S1.); +#7584 = CIRCLE('',#7585,0.1); +#7585 = AXIS2_PLACEMENT_3D('',#7586,#7587,#7588); +#7586 = CARTESIAN_POINT('',(2.25,2.335,0.725)); +#7587 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#7588 = DIRECTION('',(4.440892098501E-15,9.860761315262E-31,1.)); +#7589 = PCURVE('',#4487,#7590); +#7590 = DEFINITIONAL_REPRESENTATION('',(#7591),#7595); +#7591 = LINE('',#7592,#7593); +#7592 = CARTESIAN_POINT('',(0.,-0.41)); +#7593 = VECTOR('',#7594,1.); +#7594 = DIRECTION('',(1.,0.)); +#7595 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7596 = PCURVE('',#4461,#7597); +#7597 = DEFINITIONAL_REPRESENTATION('',(#7598),#7606); +#7598 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#7599,#7600,#7601,#7602, +#7603,#7604,#7605),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#7599 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#7600 = CARTESIAN_POINT('',(0.292340342435,-7.415408746888E-03)); +#7601 = CARTESIAN_POINT('',(0.142340342435,7.918713163156E-02)); +#7602 = CARTESIAN_POINT('',(-7.659657565E-03,0.16578967201)); +#7603 = CARTESIAN_POINT('',(0.142340342435,0.252392212388)); +#7604 = CARTESIAN_POINT('',(0.292340342435,0.338994752767)); +#7605 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#7606 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7607 = ORIENTED_EDGE('',*,*,#7608,.F.); +#7608 = EDGE_CURVE('',#5683,#7581,#7609,.T.); +#7609 = SURFACE_CURVE('',#7610,(#7614,#7621),.PCURVE_S1.); +#7610 = LINE('',#7611,#7612); +#7611 = CARTESIAN_POINT('',(2.35,2.745,0.725)); +#7612 = VECTOR('',#7613,1.); +#7613 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#7614 = PCURVE('',#4487,#7615); +#7615 = DEFINITIONAL_REPRESENTATION('',(#7616),#7620); +#7616 = LINE('',#7617,#7618); +#7617 = CARTESIAN_POINT('',(1.570796326795,0.)); +#7618 = VECTOR('',#7619,1.); +#7619 = DIRECTION('',(0.,-1.)); +#7620 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7621 = PCURVE('',#5726,#7622); +#7622 = DEFINITIONAL_REPRESENTATION('',(#7623),#7627); +#7623 = LINE('',#7624,#7625); +#7624 = CARTESIAN_POINT('',(0.,0.)); +#7625 = VECTOR('',#7626,1.); +#7626 = DIRECTION('',(7.584527938158E-44,-1.)); +#7627 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7628 = ORIENTED_EDGE('',*,*,#5682,.F.); +#7629 = ADVANCED_FACE('',(#7630),#4461,.T.); +#7630 = FACE_BOUND('',#7631,.T.); +#7631 = EDGE_LOOP('',(#7632,#7633,#7634,#7635,#7658,#7682,#7705,#7728, + #7751,#7779,#7802,#7826)); +#7632 = ORIENTED_EDGE('',*,*,#4583,.F.); +#7633 = ORIENTED_EDGE('',*,*,#4445,.T.); +#7634 = ORIENTED_EDGE('',*,*,#7580,.T.); +#7635 = ORIENTED_EDGE('',*,*,#7636,.T.); +#7636 = EDGE_CURVE('',#7581,#7637,#7639,.T.); +#7637 = VERTEX_POINT('',#7638); +#7638 = CARTESIAN_POINT('',(2.35,2.335,0.3)); +#7639 = SURFACE_CURVE('',#7640,(#7644,#7651),.PCURVE_S1.); +#7640 = LINE('',#7641,#7642); +#7641 = CARTESIAN_POINT('',(2.35,2.335,0.725)); +#7642 = VECTOR('',#7643,1.); +#7643 = DIRECTION('',(1.044915787883E-15,2.320179133003E-31,-1.)); +#7644 = PCURVE('',#4461,#7645); +#7645 = DEFINITIONAL_REPRESENTATION('',(#7646),#7650); +#7646 = LINE('',#7647,#7648); +#7647 = CARTESIAN_POINT('',(0.192340342435,6.578967201E-02)); +#7648 = VECTOR('',#7649,1.); +#7649 = DIRECTION('',(-1.,-1.044915787883E-15)); +#7650 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7651 = PCURVE('',#5726,#7652); +#7652 = DEFINITIONAL_REPRESENTATION('',(#7653),#7657); +#7653 = LINE('',#7654,#7655); +#7654 = CARTESIAN_POINT('',(-9.512734445312E-32,-0.41)); +#7655 = VECTOR('',#7656,1.); +#7656 = DIRECTION('',(1.,0.)); +#7657 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7658 = ORIENTED_EDGE('',*,*,#7659,.T.); +#7659 = EDGE_CURVE('',#7637,#7660,#7662,.T.); +#7660 = VERTEX_POINT('',#7661); +#7661 = CARTESIAN_POINT('',(2.65,2.335,5.551115123126E-17)); +#7662 = SURFACE_CURVE('',#7663,(#7668,#7675),.PCURVE_S1.); +#7663 = CIRCLE('',#7664,0.3); +#7664 = AXIS2_PLACEMENT_3D('',#7665,#7666,#7667); +#7665 = CARTESIAN_POINT('',(2.65,2.335,0.3)); +#7666 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#7667 = DIRECTION('',(-1.,-2.22044604925E-16,3.515706244646E-15)); +#7668 = PCURVE('',#4461,#7669); +#7669 = DEFINITIONAL_REPRESENTATION('',(#7670),#7674); +#7670 = CIRCLE('',#7671,0.3); +#7671 = AXIS2_PLACEMENT_2D('',#7672,#7673); +#7672 = CARTESIAN_POINT('',(-0.232659657565,-0.23421032799)); +#7673 = DIRECTION('',(3.515706244646E-15,1.)); +#7674 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7675 = PCURVE('',#5755,#7676); +#7676 = DEFINITIONAL_REPRESENTATION('',(#7677),#7681); +#7677 = LINE('',#7678,#7679); +#7678 = CARTESIAN_POINT('',(6.28318530718,-0.41)); +#7679 = VECTOR('',#7680,1.); +#7680 = DIRECTION('',(-1.,0.)); +#7681 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7682 = ORIENTED_EDGE('',*,*,#7683,.T.); +#7683 = EDGE_CURVE('',#7660,#7684,#7686,.T.); +#7684 = VERTEX_POINT('',#7685); +#7685 = CARTESIAN_POINT('',(3.,2.335,5.551115123126E-17)); +#7686 = SURFACE_CURVE('',#7687,(#7691,#7698),.PCURVE_S1.); +#7687 = LINE('',#7688,#7689); +#7688 = CARTESIAN_POINT('',(2.65,2.335,5.551115123126E-17)); +#7689 = VECTOR('',#7690,1.); +#7690 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#7691 = PCURVE('',#4461,#7692); +#7692 = DEFINITIONAL_REPRESENTATION('',(#7693),#7697); +#7693 = LINE('',#7694,#7695); +#7694 = CARTESIAN_POINT('',(-0.532659657565,-0.23421032799)); +#7695 = VECTOR('',#7696,1.); +#7696 = DIRECTION('',(0.,-1.)); +#7697 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7698 = PCURVE('',#5783,#7699); +#7699 = DEFINITIONAL_REPRESENTATION('',(#7700),#7704); +#7700 = LINE('',#7701,#7702); +#7701 = CARTESIAN_POINT('',(-9.103828801925E-17,-0.41)); +#7702 = VECTOR('',#7703,1.); +#7703 = DIRECTION('',(1.,0.)); +#7704 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7705 = ORIENTED_EDGE('',*,*,#7706,.T.); +#7706 = EDGE_CURVE('',#7684,#7707,#7709,.T.); +#7707 = VERTEX_POINT('',#7708); +#7708 = CARTESIAN_POINT('',(3.,2.335,0.2)); +#7709 = SURFACE_CURVE('',#7710,(#7714,#7721),.PCURVE_S1.); +#7710 = LINE('',#7711,#7712); +#7711 = CARTESIAN_POINT('',(3.,2.335,5.551115123126E-17)); +#7712 = VECTOR('',#7713,1.); +#7713 = DIRECTION('',(0.,0.,1.)); +#7714 = PCURVE('',#4461,#7715); +#7715 = DEFINITIONAL_REPRESENTATION('',(#7716),#7720); +#7716 = LINE('',#7717,#7718); +#7717 = CARTESIAN_POINT('',(-0.532659657565,-0.58421032799)); +#7718 = VECTOR('',#7719,1.); +#7719 = DIRECTION('',(1.,0.)); +#7720 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7721 = PCURVE('',#5811,#7722); +#7722 = DEFINITIONAL_REPRESENTATION('',(#7723),#7727); +#7723 = LINE('',#7724,#7725); +#7724 = CARTESIAN_POINT('',(0.,-0.41)); +#7725 = VECTOR('',#7726,1.); +#7726 = DIRECTION('',(1.,0.)); +#7727 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7728 = ORIENTED_EDGE('',*,*,#7729,.T.); +#7729 = EDGE_CURVE('',#7707,#7730,#7732,.T.); +#7730 = VERTEX_POINT('',#7731); +#7731 = CARTESIAN_POINT('',(2.65,2.335,0.2)); +#7732 = SURFACE_CURVE('',#7733,(#7737,#7744),.PCURVE_S1.); +#7733 = LINE('',#7734,#7735); +#7734 = CARTESIAN_POINT('',(3.,2.335,0.2)); +#7735 = VECTOR('',#7736,1.); +#7736 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#7737 = PCURVE('',#4461,#7738); +#7738 = DEFINITIONAL_REPRESENTATION('',(#7739),#7743); +#7739 = LINE('',#7740,#7741); +#7740 = CARTESIAN_POINT('',(-0.332659657565,-0.58421032799)); +#7741 = VECTOR('',#7742,1.); +#7742 = DIRECTION('',(0.,1.)); +#7743 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7744 = PCURVE('',#5839,#7745); +#7745 = DEFINITIONAL_REPRESENTATION('',(#7746),#7750); +#7746 = LINE('',#7747,#7748); +#7747 = CARTESIAN_POINT('',(9.103828801925E-17,-0.41)); +#7748 = VECTOR('',#7749,1.); +#7749 = DIRECTION('',(1.,0.)); +#7750 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7751 = ORIENTED_EDGE('',*,*,#7752,.T.); +#7752 = EDGE_CURVE('',#7730,#7753,#7755,.T.); +#7753 = VERTEX_POINT('',#7754); +#7754 = CARTESIAN_POINT('',(2.55,2.335,0.3)); +#7755 = SURFACE_CURVE('',#7756,(#7761,#7772),.PCURVE_S1.); +#7756 = CIRCLE('',#7757,0.1); +#7757 = AXIS2_PLACEMENT_3D('',#7758,#7759,#7760); +#7758 = CARTESIAN_POINT('',(2.65,2.335,0.3)); +#7759 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#7760 = DIRECTION('',(0.,0.,-1.)); +#7761 = PCURVE('',#4461,#7762); +#7762 = DEFINITIONAL_REPRESENTATION('',(#7763),#7771); +#7763 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#7764,#7765,#7766,#7767, +#7768,#7769,#7770),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#7764 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#7765 = CARTESIAN_POINT('',(-0.332659657565,-6.100524723311E-02)); +#7766 = CARTESIAN_POINT('',(-0.182659657565,-0.147607787612)); +#7767 = CARTESIAN_POINT('',(-3.2659657565E-02,-0.23421032799)); +#7768 = CARTESIAN_POINT('',(-0.182659657565,-0.320812868368)); +#7769 = CARTESIAN_POINT('',(-0.332659657565,-0.407415408747)); +#7770 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#7771 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7772 = PCURVE('',#5872,#7773); +#7773 = DEFINITIONAL_REPRESENTATION('',(#7774),#7778); +#7774 = LINE('',#7775,#7776); +#7775 = CARTESIAN_POINT('',(0.,-0.41)); +#7776 = VECTOR('',#7777,1.); +#7777 = DIRECTION('',(1.,0.)); +#7778 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7779 = ORIENTED_EDGE('',*,*,#7780,.T.); +#7780 = EDGE_CURVE('',#7753,#7781,#7783,.T.); +#7781 = VERTEX_POINT('',#7782); +#7782 = CARTESIAN_POINT('',(2.55,2.335,0.725)); +#7783 = SURFACE_CURVE('',#7784,(#7788,#7795),.PCURVE_S1.); +#7784 = LINE('',#7785,#7786); +#7785 = CARTESIAN_POINT('',(2.55,2.335,0.3)); +#7786 = VECTOR('',#7787,1.); +#7787 = DIRECTION('',(0.,0.,1.)); +#7788 = PCURVE('',#4461,#7789); +#7789 = DEFINITIONAL_REPRESENTATION('',(#7790),#7794); +#7790 = LINE('',#7791,#7792); +#7791 = CARTESIAN_POINT('',(-0.232659657565,-0.13421032799)); +#7792 = VECTOR('',#7793,1.); +#7793 = DIRECTION('',(1.,0.)); +#7794 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7795 = PCURVE('',#5900,#7796); +#7796 = DEFINITIONAL_REPRESENTATION('',(#7797),#7801); +#7797 = LINE('',#7798,#7799); +#7798 = CARTESIAN_POINT('',(0.,-0.41)); +#7799 = VECTOR('',#7800,1.); +#7800 = DIRECTION('',(1.,0.)); +#7801 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7802 = ORIENTED_EDGE('',*,*,#7803,.T.); +#7803 = EDGE_CURVE('',#7781,#7804,#7806,.T.); +#7804 = VERTEX_POINT('',#7805); +#7805 = CARTESIAN_POINT('',(2.25,2.335,1.025)); +#7806 = SURFACE_CURVE('',#7807,(#7812,#7819),.PCURVE_S1.); +#7807 = CIRCLE('',#7808,0.3); +#7808 = AXIS2_PLACEMENT_3D('',#7809,#7810,#7811); +#7809 = CARTESIAN_POINT('',(2.25,2.335,0.725)); +#7810 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#7811 = DIRECTION('',(1.,2.22044604925E-16,3.700743415417E-16)); +#7812 = PCURVE('',#4461,#7813); +#7813 = DEFINITIONAL_REPRESENTATION('',(#7814),#7818); +#7814 = CIRCLE('',#7815,0.3); +#7815 = AXIS2_PLACEMENT_2D('',#7816,#7817); +#7816 = CARTESIAN_POINT('',(0.192340342435,0.16578967201)); +#7817 = DIRECTION('',(3.700743415417E-16,-1.)); +#7818 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7819 = PCURVE('',#5929,#7820); +#7820 = DEFINITIONAL_REPRESENTATION('',(#7821),#7825); +#7821 = LINE('',#7822,#7823); +#7822 = CARTESIAN_POINT('',(6.28318530718,-0.41)); +#7823 = VECTOR('',#7824,1.); +#7824 = DIRECTION('',(-1.,0.)); +#7825 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7826 = ORIENTED_EDGE('',*,*,#7827,.T.); +#7827 = EDGE_CURVE('',#7804,#4584,#7828,.T.); +#7828 = SURFACE_CURVE('',#7829,(#7833,#7840),.PCURVE_S1.); +#7829 = LINE('',#7830,#7831); +#7830 = CARTESIAN_POINT('',(2.25,2.335,1.025)); +#7831 = VECTOR('',#7832,1.); +#7832 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#7833 = PCURVE('',#4461,#7834); +#7834 = DEFINITIONAL_REPRESENTATION('',(#7835),#7839); +#7835 = LINE('',#7836,#7837); +#7836 = CARTESIAN_POINT('',(0.492340342435,0.16578967201)); +#7837 = VECTOR('',#7838,1.); +#7838 = DIRECTION('',(0.,1.)); +#7839 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7840 = PCURVE('',#5288,#7841); +#7841 = DEFINITIONAL_REPRESENTATION('',(#7842),#7846); +#7842 = LINE('',#7843,#7844); +#7843 = CARTESIAN_POINT('',(9.103828801925E-17,-0.41)); +#7844 = VECTOR('',#7845,1.); +#7845 = DIRECTION('',(1.,0.)); +#7846 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7847 = ADVANCED_FACE('',(#7848),#4518,.F.); +#7848 = FACE_BOUND('',#7849,.F.); +#7849 = EDGE_LOOP('',(#7850,#7851,#7852,#7880,#7903,#7927,#7950,#7973, + #7996,#8024,#8047,#8071)); +#7850 = ORIENTED_EDGE('',*,*,#4693,.F.); +#7851 = ORIENTED_EDGE('',*,*,#4502,.T.); +#7852 = ORIENTED_EDGE('',*,*,#7853,.T.); +#7853 = EDGE_CURVE('',#4503,#7854,#7856,.T.); +#7854 = VERTEX_POINT('',#7855); +#7855 = CARTESIAN_POINT('',(2.35,-2.335,0.725)); +#7856 = SURFACE_CURVE('',#7857,(#7862,#7873),.PCURVE_S1.); +#7857 = CIRCLE('',#7858,0.1); +#7858 = AXIS2_PLACEMENT_3D('',#7859,#7860,#7861); +#7859 = CARTESIAN_POINT('',(2.25,-2.335,0.725)); +#7860 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#7861 = DIRECTION('',(4.440892098501E-15,9.860761315262E-31,1.)); +#7862 = PCURVE('',#4518,#7863); +#7863 = DEFINITIONAL_REPRESENTATION('',(#7864),#7872); +#7864 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#7865,#7866,#7867,#7868, +#7869,#7870,#7871),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#7865 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#7866 = CARTESIAN_POINT('',(0.292340342435,-7.415408746888E-03)); +#7867 = CARTESIAN_POINT('',(0.142340342435,7.918713163156E-02)); +#7868 = CARTESIAN_POINT('',(-7.659657565E-03,0.16578967201)); +#7869 = CARTESIAN_POINT('',(0.142340342435,0.252392212388)); +#7870 = CARTESIAN_POINT('',(0.292340342435,0.338994752767)); +#7871 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#7872 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7873 = PCURVE('',#4568,#7874); +#7874 = DEFINITIONAL_REPRESENTATION('',(#7875),#7879); +#7875 = LINE('',#7876,#7877); +#7876 = CARTESIAN_POINT('',(0.,0.)); +#7877 = VECTOR('',#7878,1.); +#7878 = DIRECTION('',(1.,0.)); +#7879 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7880 = ORIENTED_EDGE('',*,*,#7881,.T.); +#7881 = EDGE_CURVE('',#7854,#7882,#7884,.T.); +#7882 = VERTEX_POINT('',#7883); +#7883 = CARTESIAN_POINT('',(2.35,-2.335,0.3)); +#7884 = SURFACE_CURVE('',#7885,(#7889,#7896),.PCURVE_S1.); +#7885 = LINE('',#7886,#7887); +#7886 = CARTESIAN_POINT('',(2.35,-2.335,0.725)); +#7887 = VECTOR('',#7888,1.); +#7888 = DIRECTION('',(1.044915787883E-15,2.320179133003E-31,-1.)); +#7889 = PCURVE('',#4518,#7890); +#7890 = DEFINITIONAL_REPRESENTATION('',(#7891),#7895); +#7891 = LINE('',#7892,#7893); +#7892 = CARTESIAN_POINT('',(0.192340342435,6.578967201E-02)); +#7893 = VECTOR('',#7894,1.); +#7894 = DIRECTION('',(-1.,-1.044915787883E-15)); +#7895 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7896 = PCURVE('',#7295,#7897); +#7897 = DEFINITIONAL_REPRESENTATION('',(#7898),#7902); +#7898 = LINE('',#7899,#7900); +#7899 = CARTESIAN_POINT('',(0.,0.)); +#7900 = VECTOR('',#7901,1.); +#7901 = DIRECTION('',(1.,0.)); +#7902 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7903 = ORIENTED_EDGE('',*,*,#7904,.T.); +#7904 = EDGE_CURVE('',#7882,#7905,#7907,.T.); +#7905 = VERTEX_POINT('',#7906); +#7906 = CARTESIAN_POINT('',(2.65,-2.335,5.551115123126E-17)); +#7907 = SURFACE_CURVE('',#7908,(#7913,#7920),.PCURVE_S1.); +#7908 = CIRCLE('',#7909,0.3); +#7909 = AXIS2_PLACEMENT_3D('',#7910,#7911,#7912); +#7910 = CARTESIAN_POINT('',(2.65,-2.335,0.3)); +#7911 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#7912 = DIRECTION('',(-1.,-2.22044604925E-16,3.515706244646E-15)); +#7913 = PCURVE('',#4518,#7914); +#7914 = DEFINITIONAL_REPRESENTATION('',(#7915),#7919); +#7915 = CIRCLE('',#7916,0.3); +#7916 = AXIS2_PLACEMENT_2D('',#7917,#7918); +#7917 = CARTESIAN_POINT('',(-0.232659657565,-0.23421032799)); +#7918 = DIRECTION('',(3.515706244646E-15,1.)); +#7919 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7920 = PCURVE('',#7324,#7921); +#7921 = DEFINITIONAL_REPRESENTATION('',(#7922),#7926); +#7922 = LINE('',#7923,#7924); +#7923 = CARTESIAN_POINT('',(6.28318530718,0.)); +#7924 = VECTOR('',#7925,1.); +#7925 = DIRECTION('',(-1.,0.)); +#7926 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7927 = ORIENTED_EDGE('',*,*,#7928,.T.); +#7928 = EDGE_CURVE('',#7905,#7929,#7931,.T.); +#7929 = VERTEX_POINT('',#7930); +#7930 = CARTESIAN_POINT('',(3.,-2.335,5.551115123126E-17)); +#7931 = SURFACE_CURVE('',#7932,(#7936,#7943),.PCURVE_S1.); +#7932 = LINE('',#7933,#7934); +#7933 = CARTESIAN_POINT('',(2.65,-2.335,5.551115123126E-17)); +#7934 = VECTOR('',#7935,1.); +#7935 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#7936 = PCURVE('',#4518,#7937); +#7937 = DEFINITIONAL_REPRESENTATION('',(#7938),#7942); +#7938 = LINE('',#7939,#7940); +#7939 = CARTESIAN_POINT('',(-0.532659657565,-0.23421032799)); +#7940 = VECTOR('',#7941,1.); +#7941 = DIRECTION('',(0.,-1.)); +#7942 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7943 = PCURVE('',#7352,#7944); +#7944 = DEFINITIONAL_REPRESENTATION('',(#7945),#7949); +#7945 = LINE('',#7946,#7947); +#7946 = CARTESIAN_POINT('',(0.,0.)); +#7947 = VECTOR('',#7948,1.); +#7948 = DIRECTION('',(1.,0.)); +#7949 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7950 = ORIENTED_EDGE('',*,*,#7951,.T.); +#7951 = EDGE_CURVE('',#7929,#7952,#7954,.T.); +#7952 = VERTEX_POINT('',#7953); +#7953 = CARTESIAN_POINT('',(3.,-2.335,0.2)); +#7954 = SURFACE_CURVE('',#7955,(#7959,#7966),.PCURVE_S1.); +#7955 = LINE('',#7956,#7957); +#7956 = CARTESIAN_POINT('',(3.,-2.335,5.551115123126E-17)); +#7957 = VECTOR('',#7958,1.); +#7958 = DIRECTION('',(0.,0.,1.)); +#7959 = PCURVE('',#4518,#7960); +#7960 = DEFINITIONAL_REPRESENTATION('',(#7961),#7965); +#7961 = LINE('',#7962,#7963); +#7962 = CARTESIAN_POINT('',(-0.532659657565,-0.58421032799)); +#7963 = VECTOR('',#7964,1.); +#7964 = DIRECTION('',(1.,0.)); +#7965 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7966 = PCURVE('',#7380,#7967); +#7967 = DEFINITIONAL_REPRESENTATION('',(#7968),#7972); +#7968 = LINE('',#7969,#7970); +#7969 = CARTESIAN_POINT('',(0.,0.)); +#7970 = VECTOR('',#7971,1.); +#7971 = DIRECTION('',(1.,0.)); +#7972 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7973 = ORIENTED_EDGE('',*,*,#7974,.T.); +#7974 = EDGE_CURVE('',#7952,#7975,#7977,.T.); +#7975 = VERTEX_POINT('',#7976); +#7976 = CARTESIAN_POINT('',(2.65,-2.335,0.2)); +#7977 = SURFACE_CURVE('',#7978,(#7982,#7989),.PCURVE_S1.); +#7978 = LINE('',#7979,#7980); +#7979 = CARTESIAN_POINT('',(3.,-2.335,0.2)); +#7980 = VECTOR('',#7981,1.); +#7981 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#7982 = PCURVE('',#4518,#7983); +#7983 = DEFINITIONAL_REPRESENTATION('',(#7984),#7988); +#7984 = LINE('',#7985,#7986); +#7985 = CARTESIAN_POINT('',(-0.332659657565,-0.58421032799)); +#7986 = VECTOR('',#7987,1.); +#7987 = DIRECTION('',(0.,1.)); +#7988 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7989 = PCURVE('',#7408,#7990); +#7990 = DEFINITIONAL_REPRESENTATION('',(#7991),#7995); +#7991 = LINE('',#7992,#7993); +#7992 = CARTESIAN_POINT('',(-0.,0.)); +#7993 = VECTOR('',#7994,1.); +#7994 = DIRECTION('',(1.,0.)); +#7995 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#7996 = ORIENTED_EDGE('',*,*,#7997,.T.); +#7997 = EDGE_CURVE('',#7975,#7998,#8000,.T.); +#7998 = VERTEX_POINT('',#7999); +#7999 = CARTESIAN_POINT('',(2.55,-2.335,0.3)); +#8000 = SURFACE_CURVE('',#8001,(#8006,#8017),.PCURVE_S1.); +#8001 = CIRCLE('',#8002,0.1); +#8002 = AXIS2_PLACEMENT_3D('',#8003,#8004,#8005); +#8003 = CARTESIAN_POINT('',(2.65,-2.335,0.3)); +#8004 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#8005 = DIRECTION('',(0.,0.,-1.)); +#8006 = PCURVE('',#4518,#8007); +#8007 = DEFINITIONAL_REPRESENTATION('',(#8008),#8016); +#8008 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#8009,#8010,#8011,#8012, +#8013,#8014,#8015),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#8009 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#8010 = CARTESIAN_POINT('',(-0.332659657565,-6.100524723311E-02)); +#8011 = CARTESIAN_POINT('',(-0.182659657565,-0.147607787612)); +#8012 = CARTESIAN_POINT('',(-3.2659657565E-02,-0.23421032799)); +#8013 = CARTESIAN_POINT('',(-0.182659657565,-0.320812868368)); +#8014 = CARTESIAN_POINT('',(-0.332659657565,-0.407415408747)); +#8015 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#8016 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8017 = PCURVE('',#7441,#8018); +#8018 = DEFINITIONAL_REPRESENTATION('',(#8019),#8023); +#8019 = LINE('',#8020,#8021); +#8020 = CARTESIAN_POINT('',(0.,0.)); +#8021 = VECTOR('',#8022,1.); +#8022 = DIRECTION('',(1.,0.)); +#8023 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8024 = ORIENTED_EDGE('',*,*,#8025,.T.); +#8025 = EDGE_CURVE('',#7998,#8026,#8028,.T.); +#8026 = VERTEX_POINT('',#8027); +#8027 = CARTESIAN_POINT('',(2.55,-2.335,0.725)); +#8028 = SURFACE_CURVE('',#8029,(#8033,#8040),.PCURVE_S1.); +#8029 = LINE('',#8030,#8031); +#8030 = CARTESIAN_POINT('',(2.55,-2.335,0.3)); +#8031 = VECTOR('',#8032,1.); +#8032 = DIRECTION('',(0.,0.,1.)); +#8033 = PCURVE('',#4518,#8034); +#8034 = DEFINITIONAL_REPRESENTATION('',(#8035),#8039); +#8035 = LINE('',#8036,#8037); +#8036 = CARTESIAN_POINT('',(-0.232659657565,-0.13421032799)); +#8037 = VECTOR('',#8038,1.); +#8038 = DIRECTION('',(1.,0.)); +#8039 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8040 = PCURVE('',#7469,#8041); +#8041 = DEFINITIONAL_REPRESENTATION('',(#8042),#8046); +#8042 = LINE('',#8043,#8044); +#8043 = CARTESIAN_POINT('',(0.,0.)); +#8044 = VECTOR('',#8045,1.); +#8045 = DIRECTION('',(1.,0.)); +#8046 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8047 = ORIENTED_EDGE('',*,*,#8048,.T.); +#8048 = EDGE_CURVE('',#8026,#8049,#8051,.T.); +#8049 = VERTEX_POINT('',#8050); +#8050 = CARTESIAN_POINT('',(2.25,-2.335,1.025)); +#8051 = SURFACE_CURVE('',#8052,(#8057,#8064),.PCURVE_S1.); +#8052 = CIRCLE('',#8053,0.3); +#8053 = AXIS2_PLACEMENT_3D('',#8054,#8055,#8056); +#8054 = CARTESIAN_POINT('',(2.25,-2.335,0.725)); +#8055 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#8056 = DIRECTION('',(1.,2.22044604925E-16,3.700743415417E-16)); +#8057 = PCURVE('',#4518,#8058); +#8058 = DEFINITIONAL_REPRESENTATION('',(#8059),#8063); +#8059 = CIRCLE('',#8060,0.3); +#8060 = AXIS2_PLACEMENT_2D('',#8061,#8062); +#8061 = CARTESIAN_POINT('',(0.192340342435,0.16578967201)); +#8062 = DIRECTION('',(3.700743415417E-16,-1.)); +#8063 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8064 = PCURVE('',#7498,#8065); +#8065 = DEFINITIONAL_REPRESENTATION('',(#8066),#8070); +#8066 = LINE('',#8067,#8068); +#8067 = CARTESIAN_POINT('',(6.28318530718,0.)); +#8068 = VECTOR('',#8069,1.); +#8069 = DIRECTION('',(-1.,0.)); +#8070 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8071 = ORIENTED_EDGE('',*,*,#8072,.T.); +#8072 = EDGE_CURVE('',#8049,#4694,#8073,.T.); +#8073 = SURFACE_CURVE('',#8074,(#8078,#8085),.PCURVE_S1.); +#8074 = LINE('',#8075,#8076); +#8075 = CARTESIAN_POINT('',(2.25,-2.335,1.025)); +#8076 = VECTOR('',#8077,1.); +#8077 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#8078 = PCURVE('',#4518,#8079); +#8079 = DEFINITIONAL_REPRESENTATION('',(#8080),#8084); +#8080 = LINE('',#8081,#8082); +#8081 = CARTESIAN_POINT('',(0.492340342435,0.16578967201)); +#8082 = VECTOR('',#8083,1.); +#8083 = DIRECTION('',(0.,1.)); +#8084 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8085 = PCURVE('',#5488,#8086); +#8086 = DEFINITIONAL_REPRESENTATION('',(#8087),#8091); +#8087 = LINE('',#8088,#8089); +#8088 = CARTESIAN_POINT('',(-0.,0.)); +#8089 = VECTOR('',#8090,1.); +#8090 = DIRECTION('',(1.,0.)); +#8091 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8092 = ADVANCED_FACE('',(#8093),#4568,.F.); +#8093 = FACE_BOUND('',#8094,.F.); +#8094 = EDGE_LOOP('',(#8095,#8096,#8097,#8118)); +#8095 = ORIENTED_EDGE('',*,*,#4554,.T.); +#8096 = ORIENTED_EDGE('',*,*,#7251,.T.); +#8097 = ORIENTED_EDGE('',*,*,#8098,.F.); +#8098 = EDGE_CURVE('',#7854,#7252,#8099,.T.); +#8099 = SURFACE_CURVE('',#8100,(#8104,#8111),.PCURVE_S1.); +#8100 = LINE('',#8101,#8102); +#8101 = CARTESIAN_POINT('',(2.35,-2.335,0.725)); +#8102 = VECTOR('',#8103,1.); +#8103 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#8104 = PCURVE('',#4568,#8105); +#8105 = DEFINITIONAL_REPRESENTATION('',(#8106),#8110); +#8106 = LINE('',#8107,#8108); +#8107 = CARTESIAN_POINT('',(1.570796326795,0.)); +#8108 = VECTOR('',#8109,1.); +#8109 = DIRECTION('',(0.,-1.)); +#8110 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8111 = PCURVE('',#7295,#8112); +#8112 = DEFINITIONAL_REPRESENTATION('',(#8113),#8117); +#8113 = LINE('',#8114,#8115); +#8114 = CARTESIAN_POINT('',(0.,0.)); +#8115 = VECTOR('',#8116,1.); +#8116 = DIRECTION('',(7.584527938158E-44,-1.)); +#8117 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8118 = ORIENTED_EDGE('',*,*,#7853,.F.); +#8119 = ADVANCED_FACE('',(#8120),#4649,.F.); +#8120 = FACE_BOUND('',#8121,.F.); +#8121 = EDGE_LOOP('',(#8122,#8142,#8143,#8163)); +#8122 = ORIENTED_EDGE('',*,*,#8123,.F.); +#8123 = EDGE_CURVE('',#4584,#5273,#8124,.T.); +#8124 = SURFACE_CURVE('',#8125,(#8129,#8135),.PCURVE_S1.); +#8125 = LINE('',#8126,#8127); +#8126 = CARTESIAN_POINT('',(2.25,2.335,1.025)); +#8127 = VECTOR('',#8128,1.); +#8128 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#8129 = PCURVE('',#4649,#8130); +#8130 = DEFINITIONAL_REPRESENTATION('',(#8131),#8134); +#8131 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#8132,#8133),.UNSPECIFIED.,.F., + .F.,(2,2),(0.3,0.375),.PIECEWISE_BEZIER_KNOTS.); +#8132 = CARTESIAN_POINT('',(1.84,1.957371763853E-16)); +#8133 = CARTESIAN_POINT('',(1.818836858006,1.)); +#8134 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8135 = PCURVE('',#5288,#8136); +#8136 = DEFINITIONAL_REPRESENTATION('',(#8137),#8141); +#8137 = LINE('',#8138,#8139); +#8138 = CARTESIAN_POINT('',(9.103828801925E-17,-0.41)); +#8139 = VECTOR('',#8140,1.); +#8140 = DIRECTION('',(1.,0.)); +#8141 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8142 = ORIENTED_EDGE('',*,*,#4635,.T.); +#8143 = ORIENTED_EDGE('',*,*,#8144,.T.); +#8144 = EDGE_CURVE('',#4608,#5301,#8145,.T.); +#8145 = SURFACE_CURVE('',#8146,(#8150,#8156),.PCURVE_S1.); +#8146 = LINE('',#8147,#8148); +#8147 = CARTESIAN_POINT('',(2.25,1.475,1.025)); +#8148 = VECTOR('',#8149,1.); +#8149 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#8150 = PCURVE('',#4649,#8151); +#8151 = DEFINITIONAL_REPRESENTATION('',(#8152),#8155); +#8152 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#8153,#8154),.UNSPECIFIED.,.F., + .F.,(2,2),(0.3,0.375),.PIECEWISE_BEZIER_KNOTS.); +#8153 = CARTESIAN_POINT('',(2.7,1.710706247948E-15)); +#8154 = CARTESIAN_POINT('',(2.68663141994,1.)); +#8155 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8156 = PCURVE('',#5338,#8157); +#8157 = DEFINITIONAL_REPRESENTATION('',(#8158),#8162); +#8158 = LINE('',#8159,#8160); +#8159 = CARTESIAN_POINT('',(-0.,0.)); +#8160 = VECTOR('',#8161,1.); +#8161 = DIRECTION('',(1.,0.)); +#8162 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8163 = ORIENTED_EDGE('',*,*,#5300,.F.); +#8164 = ADVANCED_FACE('',(#8165),#4623,.F.); +#8165 = FACE_BOUND('',#8166,.F.); +#8166 = EDGE_LOOP('',(#8167,#8168,#8169,#8197,#8225,#8254,#8282,#8310, + #8338,#8371,#8399,#8428)); +#8167 = ORIENTED_EDGE('',*,*,#4607,.F.); +#8168 = ORIENTED_EDGE('',*,*,#4745,.T.); +#8169 = ORIENTED_EDGE('',*,*,#8170,.T.); +#8170 = EDGE_CURVE('',#4746,#8171,#8173,.T.); +#8171 = VERTEX_POINT('',#8172); +#8172 = CARTESIAN_POINT('',(2.35,1.475,0.725)); +#8173 = SURFACE_CURVE('',#8174,(#8179,#8190),.PCURVE_S1.); +#8174 = CIRCLE('',#8175,0.1); +#8175 = AXIS2_PLACEMENT_3D('',#8176,#8177,#8178); +#8176 = CARTESIAN_POINT('',(2.25,1.475,0.725)); +#8177 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#8178 = DIRECTION('',(4.440892098501E-15,9.860761315262E-31,1.)); +#8179 = PCURVE('',#4623,#8180); +#8180 = DEFINITIONAL_REPRESENTATION('',(#8181),#8189); +#8181 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#8182,#8183,#8184,#8185, +#8186,#8187,#8188),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#8182 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#8183 = CARTESIAN_POINT('',(0.292340342435,-7.415408746888E-03)); +#8184 = CARTESIAN_POINT('',(0.142340342435,7.918713163156E-02)); +#8185 = CARTESIAN_POINT('',(-7.659657565E-03,0.16578967201)); +#8186 = CARTESIAN_POINT('',(0.142340342435,0.252392212388)); +#8187 = CARTESIAN_POINT('',(0.292340342435,0.338994752767)); +#8188 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#8189 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8190 = PCURVE('',#4811,#8191); +#8191 = DEFINITIONAL_REPRESENTATION('',(#8192),#8196); +#8192 = LINE('',#8193,#8194); +#8193 = CARTESIAN_POINT('',(0.,0.)); +#8194 = VECTOR('',#8195,1.); +#8195 = DIRECTION('',(1.,0.)); +#8196 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8197 = ORIENTED_EDGE('',*,*,#8198,.T.); +#8198 = EDGE_CURVE('',#8171,#8199,#8201,.T.); +#8199 = VERTEX_POINT('',#8200); +#8200 = CARTESIAN_POINT('',(2.35,1.475,0.3)); +#8201 = SURFACE_CURVE('',#8202,(#8206,#8213),.PCURVE_S1.); +#8202 = LINE('',#8203,#8204); +#8203 = CARTESIAN_POINT('',(2.35,1.475,0.725)); +#8204 = VECTOR('',#8205,1.); +#8205 = DIRECTION('',(1.044915787883E-15,2.320179133003E-31,-1.)); +#8206 = PCURVE('',#4623,#8207); +#8207 = DEFINITIONAL_REPRESENTATION('',(#8208),#8212); +#8208 = LINE('',#8209,#8210); +#8209 = CARTESIAN_POINT('',(0.192340342435,6.578967201E-02)); +#8210 = VECTOR('',#8211,1.); +#8211 = DIRECTION('',(-1.,-1.044915787883E-15)); +#8212 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8213 = PCURVE('',#8214,#8219); +#8214 = PLANE('',#8215); +#8215 = AXIS2_PLACEMENT_3D('',#8216,#8217,#8218); +#8216 = CARTESIAN_POINT('',(2.35,1.475,0.725)); +#8217 = DIRECTION('',(1.,2.22044604925E-16,1.044915787883E-15)); +#8218 = DIRECTION('',(1.044915787883E-15,2.320179133003E-31,-1.)); +#8219 = DEFINITIONAL_REPRESENTATION('',(#8220),#8224); +#8220 = LINE('',#8221,#8222); +#8221 = CARTESIAN_POINT('',(0.,0.)); +#8222 = VECTOR('',#8223,1.); +#8223 = DIRECTION('',(1.,0.)); +#8224 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8225 = ORIENTED_EDGE('',*,*,#8226,.T.); +#8226 = EDGE_CURVE('',#8199,#8227,#8229,.T.); +#8227 = VERTEX_POINT('',#8228); +#8228 = CARTESIAN_POINT('',(2.65,1.475,5.551115123126E-17)); +#8229 = SURFACE_CURVE('',#8230,(#8235,#8242),.PCURVE_S1.); +#8230 = CIRCLE('',#8231,0.3); +#8231 = AXIS2_PLACEMENT_3D('',#8232,#8233,#8234); +#8232 = CARTESIAN_POINT('',(2.65,1.475,0.3)); +#8233 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#8234 = DIRECTION('',(-1.,-2.22044604925E-16,3.515706244646E-15)); +#8235 = PCURVE('',#4623,#8236); +#8236 = DEFINITIONAL_REPRESENTATION('',(#8237),#8241); +#8237 = CIRCLE('',#8238,0.3); +#8238 = AXIS2_PLACEMENT_2D('',#8239,#8240); +#8239 = CARTESIAN_POINT('',(-0.232659657565,-0.23421032799)); +#8240 = DIRECTION('',(3.515706244646E-15,1.)); +#8241 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8242 = PCURVE('',#8243,#8248); +#8243 = CYLINDRICAL_SURFACE('',#8244,0.3); +#8244 = AXIS2_PLACEMENT_3D('',#8245,#8246,#8247); +#8245 = CARTESIAN_POINT('',(2.65,1.475,0.3)); +#8246 = DIRECTION('',(-2.22044604925E-16,1.,-0.)); +#8247 = DIRECTION('',(-1.,-2.22044604925E-16,3.515706244646E-15)); +#8248 = DEFINITIONAL_REPRESENTATION('',(#8249),#8253); +#8249 = LINE('',#8250,#8251); +#8250 = CARTESIAN_POINT('',(6.28318530718,2.22044604925E-16)); +#8251 = VECTOR('',#8252,1.); +#8252 = DIRECTION('',(-1.,-1.413579858428E-16)); +#8253 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8254 = ORIENTED_EDGE('',*,*,#8255,.T.); +#8255 = EDGE_CURVE('',#8227,#8256,#8258,.T.); +#8256 = VERTEX_POINT('',#8257); +#8257 = CARTESIAN_POINT('',(3.,1.475,5.551115123126E-17)); +#8258 = SURFACE_CURVE('',#8259,(#8263,#8270),.PCURVE_S1.); +#8259 = LINE('',#8260,#8261); +#8260 = CARTESIAN_POINT('',(2.65,1.475,5.551115123126E-17)); +#8261 = VECTOR('',#8262,1.); +#8262 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#8263 = PCURVE('',#4623,#8264); +#8264 = DEFINITIONAL_REPRESENTATION('',(#8265),#8269); +#8265 = LINE('',#8266,#8267); +#8266 = CARTESIAN_POINT('',(-0.532659657565,-0.23421032799)); +#8267 = VECTOR('',#8268,1.); +#8268 = DIRECTION('',(0.,-1.)); +#8269 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8270 = PCURVE('',#8271,#8276); +#8271 = PLANE('',#8272); +#8272 = AXIS2_PLACEMENT_3D('',#8273,#8274,#8275); +#8273 = CARTESIAN_POINT('',(2.65,1.475,5.551115123126E-17)); +#8274 = DIRECTION('',(0.,0.,1.)); +#8275 = DIRECTION('',(1.,2.22044604925E-16,-0.)); +#8276 = DEFINITIONAL_REPRESENTATION('',(#8277),#8281); +#8277 = LINE('',#8278,#8279); +#8278 = CARTESIAN_POINT('',(0.,0.)); +#8279 = VECTOR('',#8280,1.); +#8280 = DIRECTION('',(1.,0.)); +#8281 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8282 = ORIENTED_EDGE('',*,*,#8283,.T.); +#8283 = EDGE_CURVE('',#8256,#8284,#8286,.T.); +#8284 = VERTEX_POINT('',#8285); +#8285 = CARTESIAN_POINT('',(3.,1.475,0.2)); +#8286 = SURFACE_CURVE('',#8287,(#8291,#8298),.PCURVE_S1.); +#8287 = LINE('',#8288,#8289); +#8288 = CARTESIAN_POINT('',(3.,1.475,5.551115123126E-17)); +#8289 = VECTOR('',#8290,1.); +#8290 = DIRECTION('',(0.,0.,1.)); +#8291 = PCURVE('',#4623,#8292); +#8292 = DEFINITIONAL_REPRESENTATION('',(#8293),#8297); +#8293 = LINE('',#8294,#8295); +#8294 = CARTESIAN_POINT('',(-0.532659657565,-0.58421032799)); +#8295 = VECTOR('',#8296,1.); +#8296 = DIRECTION('',(1.,0.)); +#8297 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8298 = PCURVE('',#8299,#8304); +#8299 = PLANE('',#8300); +#8300 = AXIS2_PLACEMENT_3D('',#8301,#8302,#8303); +#8301 = CARTESIAN_POINT('',(3.,1.475,5.551115123126E-17)); +#8302 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#8303 = DIRECTION('',(0.,0.,1.)); +#8304 = DEFINITIONAL_REPRESENTATION('',(#8305),#8309); +#8305 = LINE('',#8306,#8307); +#8306 = CARTESIAN_POINT('',(0.,0.)); +#8307 = VECTOR('',#8308,1.); +#8308 = DIRECTION('',(1.,0.)); +#8309 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8310 = ORIENTED_EDGE('',*,*,#8311,.T.); +#8311 = EDGE_CURVE('',#8284,#8312,#8314,.T.); +#8312 = VERTEX_POINT('',#8313); +#8313 = CARTESIAN_POINT('',(2.65,1.475,0.2)); +#8314 = SURFACE_CURVE('',#8315,(#8319,#8326),.PCURVE_S1.); +#8315 = LINE('',#8316,#8317); +#8316 = CARTESIAN_POINT('',(3.,1.475,0.2)); +#8317 = VECTOR('',#8318,1.); +#8318 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#8319 = PCURVE('',#4623,#8320); +#8320 = DEFINITIONAL_REPRESENTATION('',(#8321),#8325); +#8321 = LINE('',#8322,#8323); +#8322 = CARTESIAN_POINT('',(-0.332659657565,-0.58421032799)); +#8323 = VECTOR('',#8324,1.); +#8324 = DIRECTION('',(0.,1.)); +#8325 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8326 = PCURVE('',#8327,#8332); +#8327 = PLANE('',#8328); +#8328 = AXIS2_PLACEMENT_3D('',#8329,#8330,#8331); +#8329 = CARTESIAN_POINT('',(3.,1.475,0.2)); +#8330 = DIRECTION('',(0.,0.,-1.)); +#8331 = DIRECTION('',(-1.,-2.22044604925E-16,-0.)); +#8332 = DEFINITIONAL_REPRESENTATION('',(#8333),#8337); +#8333 = LINE('',#8334,#8335); +#8334 = CARTESIAN_POINT('',(-0.,0.)); +#8335 = VECTOR('',#8336,1.); +#8336 = DIRECTION('',(1.,0.)); +#8337 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8338 = ORIENTED_EDGE('',*,*,#8339,.T.); +#8339 = EDGE_CURVE('',#8312,#8340,#8342,.T.); +#8340 = VERTEX_POINT('',#8341); +#8341 = CARTESIAN_POINT('',(2.55,1.475,0.3)); +#8342 = SURFACE_CURVE('',#8343,(#8348,#8359),.PCURVE_S1.); +#8343 = CIRCLE('',#8344,0.1); +#8344 = AXIS2_PLACEMENT_3D('',#8345,#8346,#8347); +#8345 = CARTESIAN_POINT('',(2.65,1.475,0.3)); +#8346 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#8347 = DIRECTION('',(0.,0.,-1.)); +#8348 = PCURVE('',#4623,#8349); +#8349 = DEFINITIONAL_REPRESENTATION('',(#8350),#8358); +#8350 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#8351,#8352,#8353,#8354, +#8355,#8356,#8357),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#8351 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#8352 = CARTESIAN_POINT('',(-0.332659657565,-6.100524723311E-02)); +#8353 = CARTESIAN_POINT('',(-0.182659657565,-0.147607787612)); +#8354 = CARTESIAN_POINT('',(-3.2659657565E-02,-0.23421032799)); +#8355 = CARTESIAN_POINT('',(-0.182659657565,-0.320812868368)); +#8356 = CARTESIAN_POINT('',(-0.332659657565,-0.407415408747)); +#8357 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#8358 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8359 = PCURVE('',#8360,#8365); +#8360 = CYLINDRICAL_SURFACE('',#8361,0.1); +#8361 = AXIS2_PLACEMENT_3D('',#8362,#8363,#8364); +#8362 = CARTESIAN_POINT('',(2.65,1.475,0.3)); +#8363 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#8364 = DIRECTION('',(0.,0.,-1.)); +#8365 = DEFINITIONAL_REPRESENTATION('',(#8366),#8370); +#8366 = LINE('',#8367,#8368); +#8367 = CARTESIAN_POINT('',(0.,0.)); +#8368 = VECTOR('',#8369,1.); +#8369 = DIRECTION('',(1.,0.)); +#8370 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8371 = ORIENTED_EDGE('',*,*,#8372,.T.); +#8372 = EDGE_CURVE('',#8340,#8373,#8375,.T.); +#8373 = VERTEX_POINT('',#8374); +#8374 = CARTESIAN_POINT('',(2.55,1.475,0.725)); +#8375 = SURFACE_CURVE('',#8376,(#8380,#8387),.PCURVE_S1.); +#8376 = LINE('',#8377,#8378); +#8377 = CARTESIAN_POINT('',(2.55,1.475,0.3)); +#8378 = VECTOR('',#8379,1.); +#8379 = DIRECTION('',(0.,0.,1.)); +#8380 = PCURVE('',#4623,#8381); +#8381 = DEFINITIONAL_REPRESENTATION('',(#8382),#8386); +#8382 = LINE('',#8383,#8384); +#8383 = CARTESIAN_POINT('',(-0.232659657565,-0.13421032799)); +#8384 = VECTOR('',#8385,1.); +#8385 = DIRECTION('',(1.,0.)); +#8386 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8387 = PCURVE('',#8388,#8393); +#8388 = PLANE('',#8389); +#8389 = AXIS2_PLACEMENT_3D('',#8390,#8391,#8392); +#8390 = CARTESIAN_POINT('',(2.55,1.475,0.3)); +#8391 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#8392 = DIRECTION('',(0.,0.,1.)); +#8393 = DEFINITIONAL_REPRESENTATION('',(#8394),#8398); +#8394 = LINE('',#8395,#8396); +#8395 = CARTESIAN_POINT('',(0.,0.)); +#8396 = VECTOR('',#8397,1.); +#8397 = DIRECTION('',(1.,0.)); +#8398 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8399 = ORIENTED_EDGE('',*,*,#8400,.T.); +#8400 = EDGE_CURVE('',#8373,#8401,#8403,.T.); +#8401 = VERTEX_POINT('',#8402); +#8402 = CARTESIAN_POINT('',(2.25,1.475,1.025)); +#8403 = SURFACE_CURVE('',#8404,(#8409,#8416),.PCURVE_S1.); +#8404 = CIRCLE('',#8405,0.3); +#8405 = AXIS2_PLACEMENT_3D('',#8406,#8407,#8408); +#8406 = CARTESIAN_POINT('',(2.25,1.475,0.725)); +#8407 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#8408 = DIRECTION('',(1.,2.22044604925E-16,3.700743415417E-16)); +#8409 = PCURVE('',#4623,#8410); +#8410 = DEFINITIONAL_REPRESENTATION('',(#8411),#8415); +#8411 = CIRCLE('',#8412,0.3); +#8412 = AXIS2_PLACEMENT_2D('',#8413,#8414); +#8413 = CARTESIAN_POINT('',(0.192340342435,0.16578967201)); +#8414 = DIRECTION('',(3.700743415417E-16,-1.)); +#8415 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8416 = PCURVE('',#8417,#8422); +#8417 = CYLINDRICAL_SURFACE('',#8418,0.3); +#8418 = AXIS2_PLACEMENT_3D('',#8419,#8420,#8421); +#8419 = CARTESIAN_POINT('',(2.25,1.475,0.725)); +#8420 = DIRECTION('',(-2.22044604925E-16,1.,-0.)); +#8421 = DIRECTION('',(1.,2.22044604925E-16,3.700743415417E-16)); +#8422 = DEFINITIONAL_REPRESENTATION('',(#8423),#8427); +#8423 = LINE('',#8424,#8425); +#8424 = CARTESIAN_POINT('',(6.28318530718,-2.22044604925E-16)); +#8425 = VECTOR('',#8426,1.); +#8426 = DIRECTION('',(-1.,1.413579858428E-16)); +#8427 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8428 = ORIENTED_EDGE('',*,*,#8429,.T.); +#8429 = EDGE_CURVE('',#8401,#4608,#8430,.T.); +#8430 = SURFACE_CURVE('',#8431,(#8435,#8442),.PCURVE_S1.); +#8431 = LINE('',#8432,#8433); +#8432 = CARTESIAN_POINT('',(2.25,1.475,1.025)); +#8433 = VECTOR('',#8434,1.); +#8434 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#8435 = PCURVE('',#4623,#8436); +#8436 = DEFINITIONAL_REPRESENTATION('',(#8437),#8441); +#8437 = LINE('',#8438,#8439); +#8438 = CARTESIAN_POINT('',(0.492340342435,0.16578967201)); +#8439 = VECTOR('',#8440,1.); +#8440 = DIRECTION('',(0.,1.)); +#8441 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8442 = PCURVE('',#5338,#8443); +#8443 = DEFINITIONAL_REPRESENTATION('',(#8444),#8448); +#8444 = LINE('',#8445,#8446); +#8445 = CARTESIAN_POINT('',(-0.,0.)); +#8446 = VECTOR('',#8447,1.); +#8447 = DIRECTION('',(1.,0.)); +#8448 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8449 = ADVANCED_FACE('',(#8450),#4680,.T.); +#8450 = FACE_BOUND('',#8451,.T.); +#8451 = EDGE_LOOP('',(#8452,#8453,#8454,#8482,#8510,#8539,#8567,#8595, + #8623,#8656,#8684,#8713)); +#8452 = ORIENTED_EDGE('',*,*,#4664,.F.); +#8453 = ORIENTED_EDGE('',*,*,#4855,.T.); +#8454 = ORIENTED_EDGE('',*,*,#8455,.T.); +#8455 = EDGE_CURVE('',#4856,#8456,#8458,.T.); +#8456 = VERTEX_POINT('',#8457); +#8457 = CARTESIAN_POINT('',(2.35,-1.475,0.725)); +#8458 = SURFACE_CURVE('',#8459,(#8464,#8475),.PCURVE_S1.); +#8459 = CIRCLE('',#8460,0.1); +#8460 = AXIS2_PLACEMENT_3D('',#8461,#8462,#8463); +#8461 = CARTESIAN_POINT('',(2.25,-1.475,0.725)); +#8462 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#8463 = DIRECTION('',(4.440892098501E-15,9.860761315262E-31,1.)); +#8464 = PCURVE('',#4680,#8465); +#8465 = DEFINITIONAL_REPRESENTATION('',(#8466),#8474); +#8466 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#8467,#8468,#8469,#8470, +#8471,#8472,#8473),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#8467 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#8468 = CARTESIAN_POINT('',(0.292340342435,-7.415408746888E-03)); +#8469 = CARTESIAN_POINT('',(0.142340342435,7.918713163156E-02)); +#8470 = CARTESIAN_POINT('',(-7.659657565E-03,0.16578967201)); +#8471 = CARTESIAN_POINT('',(0.142340342435,0.252392212388)); +#8472 = CARTESIAN_POINT('',(0.292340342435,0.338994752767)); +#8473 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#8474 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8475 = PCURVE('',#4892,#8476); +#8476 = DEFINITIONAL_REPRESENTATION('',(#8477),#8481); +#8477 = LINE('',#8478,#8479); +#8478 = CARTESIAN_POINT('',(0.,-0.41)); +#8479 = VECTOR('',#8480,1.); +#8480 = DIRECTION('',(1.,0.)); +#8481 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8482 = ORIENTED_EDGE('',*,*,#8483,.T.); +#8483 = EDGE_CURVE('',#8456,#8484,#8486,.T.); +#8484 = VERTEX_POINT('',#8485); +#8485 = CARTESIAN_POINT('',(2.35,-1.475,0.3)); +#8486 = SURFACE_CURVE('',#8487,(#8491,#8498),.PCURVE_S1.); +#8487 = LINE('',#8488,#8489); +#8488 = CARTESIAN_POINT('',(2.35,-1.475,0.725)); +#8489 = VECTOR('',#8490,1.); +#8490 = DIRECTION('',(1.044915787883E-15,2.320179133003E-31,-1.)); +#8491 = PCURVE('',#4680,#8492); +#8492 = DEFINITIONAL_REPRESENTATION('',(#8493),#8497); +#8493 = LINE('',#8494,#8495); +#8494 = CARTESIAN_POINT('',(0.192340342435,6.578967201E-02)); +#8495 = VECTOR('',#8496,1.); +#8496 = DIRECTION('',(-1.,-1.044915787883E-15)); +#8497 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8498 = PCURVE('',#8499,#8504); +#8499 = PLANE('',#8500); +#8500 = AXIS2_PLACEMENT_3D('',#8501,#8502,#8503); +#8501 = CARTESIAN_POINT('',(2.35,-1.065,0.725)); +#8502 = DIRECTION('',(1.,2.22044604925E-16,1.044915787883E-15)); +#8503 = DIRECTION('',(1.044915787883E-15,2.320179133003E-31,-1.)); +#8504 = DEFINITIONAL_REPRESENTATION('',(#8505),#8509); +#8505 = LINE('',#8506,#8507); +#8506 = CARTESIAN_POINT('',(-9.512734445312E-32,-0.41)); +#8507 = VECTOR('',#8508,1.); +#8508 = DIRECTION('',(1.,0.)); +#8509 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8510 = ORIENTED_EDGE('',*,*,#8511,.T.); +#8511 = EDGE_CURVE('',#8484,#8512,#8514,.T.); +#8512 = VERTEX_POINT('',#8513); +#8513 = CARTESIAN_POINT('',(2.65,-1.475,5.551115123126E-17)); +#8514 = SURFACE_CURVE('',#8515,(#8520,#8527),.PCURVE_S1.); +#8515 = CIRCLE('',#8516,0.3); +#8516 = AXIS2_PLACEMENT_3D('',#8517,#8518,#8519); +#8517 = CARTESIAN_POINT('',(2.65,-1.475,0.3)); +#8518 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#8519 = DIRECTION('',(-1.,-2.22044604925E-16,3.515706244646E-15)); +#8520 = PCURVE('',#4680,#8521); +#8521 = DEFINITIONAL_REPRESENTATION('',(#8522),#8526); +#8522 = CIRCLE('',#8523,0.3); +#8523 = AXIS2_PLACEMENT_2D('',#8524,#8525); +#8524 = CARTESIAN_POINT('',(-0.232659657565,-0.23421032799)); +#8525 = DIRECTION('',(3.515706244646E-15,1.)); +#8526 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8527 = PCURVE('',#8528,#8533); +#8528 = CYLINDRICAL_SURFACE('',#8529,0.3); +#8529 = AXIS2_PLACEMENT_3D('',#8530,#8531,#8532); +#8530 = CARTESIAN_POINT('',(2.65,-1.065,0.3)); +#8531 = DIRECTION('',(-2.22044604925E-16,1.,-0.)); +#8532 = DIRECTION('',(-1.,-2.22044604925E-16,3.515706244646E-15)); +#8533 = DEFINITIONAL_REPRESENTATION('',(#8534),#8538); +#8534 = LINE('',#8535,#8536); +#8535 = CARTESIAN_POINT('',(6.28318530718,-0.41)); +#8536 = VECTOR('',#8537,1.); +#8537 = DIRECTION('',(-1.,-1.413579858428E-16)); +#8538 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8539 = ORIENTED_EDGE('',*,*,#8540,.T.); +#8540 = EDGE_CURVE('',#8512,#8541,#8543,.T.); +#8541 = VERTEX_POINT('',#8542); +#8542 = CARTESIAN_POINT('',(3.,-1.475,5.551115123126E-17)); +#8543 = SURFACE_CURVE('',#8544,(#8548,#8555),.PCURVE_S1.); +#8544 = LINE('',#8545,#8546); +#8545 = CARTESIAN_POINT('',(2.65,-1.475,5.551115123126E-17)); +#8546 = VECTOR('',#8547,1.); +#8547 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#8548 = PCURVE('',#4680,#8549); +#8549 = DEFINITIONAL_REPRESENTATION('',(#8550),#8554); +#8550 = LINE('',#8551,#8552); +#8551 = CARTESIAN_POINT('',(-0.532659657565,-0.23421032799)); +#8552 = VECTOR('',#8553,1.); +#8553 = DIRECTION('',(0.,-1.)); +#8554 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8555 = PCURVE('',#8556,#8561); +#8556 = PLANE('',#8557); +#8557 = AXIS2_PLACEMENT_3D('',#8558,#8559,#8560); +#8558 = CARTESIAN_POINT('',(2.65,-1.065,5.551115123126E-17)); +#8559 = DIRECTION('',(0.,0.,1.)); +#8560 = DIRECTION('',(1.,2.22044604925E-16,-0.)); +#8561 = DEFINITIONAL_REPRESENTATION('',(#8562),#8566); +#8562 = LINE('',#8563,#8564); +#8563 = CARTESIAN_POINT('',(-9.103828801925E-17,-0.41)); +#8564 = VECTOR('',#8565,1.); +#8565 = DIRECTION('',(1.,0.)); +#8566 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8567 = ORIENTED_EDGE('',*,*,#8568,.T.); +#8568 = EDGE_CURVE('',#8541,#8569,#8571,.T.); +#8569 = VERTEX_POINT('',#8570); +#8570 = CARTESIAN_POINT('',(3.,-1.475,0.2)); +#8571 = SURFACE_CURVE('',#8572,(#8576,#8583),.PCURVE_S1.); +#8572 = LINE('',#8573,#8574); +#8573 = CARTESIAN_POINT('',(3.,-1.475,5.551115123126E-17)); +#8574 = VECTOR('',#8575,1.); +#8575 = DIRECTION('',(0.,0.,1.)); +#8576 = PCURVE('',#4680,#8577); +#8577 = DEFINITIONAL_REPRESENTATION('',(#8578),#8582); +#8578 = LINE('',#8579,#8580); +#8579 = CARTESIAN_POINT('',(-0.532659657565,-0.58421032799)); +#8580 = VECTOR('',#8581,1.); +#8581 = DIRECTION('',(1.,0.)); +#8582 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8583 = PCURVE('',#8584,#8589); +#8584 = PLANE('',#8585); +#8585 = AXIS2_PLACEMENT_3D('',#8586,#8587,#8588); +#8586 = CARTESIAN_POINT('',(3.,-1.065,5.551115123126E-17)); +#8587 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#8588 = DIRECTION('',(0.,0.,1.)); +#8589 = DEFINITIONAL_REPRESENTATION('',(#8590),#8594); +#8590 = LINE('',#8591,#8592); +#8591 = CARTESIAN_POINT('',(0.,-0.41)); +#8592 = VECTOR('',#8593,1.); +#8593 = DIRECTION('',(1.,0.)); +#8594 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8595 = ORIENTED_EDGE('',*,*,#8596,.T.); +#8596 = EDGE_CURVE('',#8569,#8597,#8599,.T.); +#8597 = VERTEX_POINT('',#8598); +#8598 = CARTESIAN_POINT('',(2.65,-1.475,0.2)); +#8599 = SURFACE_CURVE('',#8600,(#8604,#8611),.PCURVE_S1.); +#8600 = LINE('',#8601,#8602); +#8601 = CARTESIAN_POINT('',(3.,-1.475,0.2)); +#8602 = VECTOR('',#8603,1.); +#8603 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#8604 = PCURVE('',#4680,#8605); +#8605 = DEFINITIONAL_REPRESENTATION('',(#8606),#8610); +#8606 = LINE('',#8607,#8608); +#8607 = CARTESIAN_POINT('',(-0.332659657565,-0.58421032799)); +#8608 = VECTOR('',#8609,1.); +#8609 = DIRECTION('',(0.,1.)); +#8610 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8611 = PCURVE('',#8612,#8617); +#8612 = PLANE('',#8613); +#8613 = AXIS2_PLACEMENT_3D('',#8614,#8615,#8616); +#8614 = CARTESIAN_POINT('',(3.,-1.065,0.2)); +#8615 = DIRECTION('',(0.,0.,-1.)); +#8616 = DIRECTION('',(-1.,-2.22044604925E-16,-0.)); +#8617 = DEFINITIONAL_REPRESENTATION('',(#8618),#8622); +#8618 = LINE('',#8619,#8620); +#8619 = CARTESIAN_POINT('',(9.103828801925E-17,-0.41)); +#8620 = VECTOR('',#8621,1.); +#8621 = DIRECTION('',(1.,0.)); +#8622 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8623 = ORIENTED_EDGE('',*,*,#8624,.T.); +#8624 = EDGE_CURVE('',#8597,#8625,#8627,.T.); +#8625 = VERTEX_POINT('',#8626); +#8626 = CARTESIAN_POINT('',(2.55,-1.475,0.3)); +#8627 = SURFACE_CURVE('',#8628,(#8633,#8644),.PCURVE_S1.); +#8628 = CIRCLE('',#8629,0.1); +#8629 = AXIS2_PLACEMENT_3D('',#8630,#8631,#8632); +#8630 = CARTESIAN_POINT('',(2.65,-1.475,0.3)); +#8631 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#8632 = DIRECTION('',(0.,0.,-1.)); +#8633 = PCURVE('',#4680,#8634); +#8634 = DEFINITIONAL_REPRESENTATION('',(#8635),#8643); +#8635 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#8636,#8637,#8638,#8639, +#8640,#8641,#8642),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#8636 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#8637 = CARTESIAN_POINT('',(-0.332659657565,-6.100524723311E-02)); +#8638 = CARTESIAN_POINT('',(-0.182659657565,-0.147607787612)); +#8639 = CARTESIAN_POINT('',(-3.2659657565E-02,-0.23421032799)); +#8640 = CARTESIAN_POINT('',(-0.182659657565,-0.320812868368)); +#8641 = CARTESIAN_POINT('',(-0.332659657565,-0.407415408747)); +#8642 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#8643 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8644 = PCURVE('',#8645,#8650); +#8645 = CYLINDRICAL_SURFACE('',#8646,0.1); +#8646 = AXIS2_PLACEMENT_3D('',#8647,#8648,#8649); +#8647 = CARTESIAN_POINT('',(2.65,-1.065,0.3)); +#8648 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#8649 = DIRECTION('',(0.,0.,-1.)); +#8650 = DEFINITIONAL_REPRESENTATION('',(#8651),#8655); +#8651 = LINE('',#8652,#8653); +#8652 = CARTESIAN_POINT('',(0.,-0.41)); +#8653 = VECTOR('',#8654,1.); +#8654 = DIRECTION('',(1.,0.)); +#8655 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8656 = ORIENTED_EDGE('',*,*,#8657,.T.); +#8657 = EDGE_CURVE('',#8625,#8658,#8660,.T.); +#8658 = VERTEX_POINT('',#8659); +#8659 = CARTESIAN_POINT('',(2.55,-1.475,0.725)); +#8660 = SURFACE_CURVE('',#8661,(#8665,#8672),.PCURVE_S1.); +#8661 = LINE('',#8662,#8663); +#8662 = CARTESIAN_POINT('',(2.55,-1.475,0.3)); +#8663 = VECTOR('',#8664,1.); +#8664 = DIRECTION('',(0.,0.,1.)); +#8665 = PCURVE('',#4680,#8666); +#8666 = DEFINITIONAL_REPRESENTATION('',(#8667),#8671); +#8667 = LINE('',#8668,#8669); +#8668 = CARTESIAN_POINT('',(-0.232659657565,-0.13421032799)); +#8669 = VECTOR('',#8670,1.); +#8670 = DIRECTION('',(1.,0.)); +#8671 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8672 = PCURVE('',#8673,#8678); +#8673 = PLANE('',#8674); +#8674 = AXIS2_PLACEMENT_3D('',#8675,#8676,#8677); +#8675 = CARTESIAN_POINT('',(2.55,-1.065,0.3)); +#8676 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#8677 = DIRECTION('',(0.,0.,1.)); +#8678 = DEFINITIONAL_REPRESENTATION('',(#8679),#8683); +#8679 = LINE('',#8680,#8681); +#8680 = CARTESIAN_POINT('',(0.,-0.41)); +#8681 = VECTOR('',#8682,1.); +#8682 = DIRECTION('',(1.,0.)); +#8683 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8684 = ORIENTED_EDGE('',*,*,#8685,.T.); +#8685 = EDGE_CURVE('',#8658,#8686,#8688,.T.); +#8686 = VERTEX_POINT('',#8687); +#8687 = CARTESIAN_POINT('',(2.25,-1.475,1.025)); +#8688 = SURFACE_CURVE('',#8689,(#8694,#8701),.PCURVE_S1.); +#8689 = CIRCLE('',#8690,0.3); +#8690 = AXIS2_PLACEMENT_3D('',#8691,#8692,#8693); +#8691 = CARTESIAN_POINT('',(2.25,-1.475,0.725)); +#8692 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#8693 = DIRECTION('',(1.,2.22044604925E-16,3.700743415417E-16)); +#8694 = PCURVE('',#4680,#8695); +#8695 = DEFINITIONAL_REPRESENTATION('',(#8696),#8700); +#8696 = CIRCLE('',#8697,0.3); +#8697 = AXIS2_PLACEMENT_2D('',#8698,#8699); +#8698 = CARTESIAN_POINT('',(0.192340342435,0.16578967201)); +#8699 = DIRECTION('',(3.700743415417E-16,-1.)); +#8700 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8701 = PCURVE('',#8702,#8707); +#8702 = CYLINDRICAL_SURFACE('',#8703,0.3); +#8703 = AXIS2_PLACEMENT_3D('',#8704,#8705,#8706); +#8704 = CARTESIAN_POINT('',(2.25,-1.065,0.725)); +#8705 = DIRECTION('',(-2.22044604925E-16,1.,-0.)); +#8706 = DIRECTION('',(1.,2.22044604925E-16,3.700743415417E-16)); +#8707 = DEFINITIONAL_REPRESENTATION('',(#8708),#8712); +#8708 = LINE('',#8709,#8710); +#8709 = CARTESIAN_POINT('',(6.28318530718,-0.41)); +#8710 = VECTOR('',#8711,1.); +#8711 = DIRECTION('',(-1.,1.413579858428E-16)); +#8712 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8713 = ORIENTED_EDGE('',*,*,#8714,.T.); +#8714 = EDGE_CURVE('',#8686,#4665,#8715,.T.); +#8715 = SURFACE_CURVE('',#8716,(#8720,#8727),.PCURVE_S1.); +#8716 = LINE('',#8717,#8718); +#8717 = CARTESIAN_POINT('',(2.25,-1.475,1.025)); +#8718 = VECTOR('',#8719,1.); +#8719 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#8720 = PCURVE('',#4680,#8721); +#8721 = DEFINITIONAL_REPRESENTATION('',(#8722),#8726); +#8722 = LINE('',#8723,#8724); +#8723 = CARTESIAN_POINT('',(0.492340342435,0.16578967201)); +#8724 = VECTOR('',#8725,1.); +#8725 = DIRECTION('',(0.,1.)); +#8726 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8727 = PCURVE('',#5438,#8728); +#8728 = DEFINITIONAL_REPRESENTATION('',(#8729),#8733); +#8729 = LINE('',#8730,#8731); +#8730 = CARTESIAN_POINT('',(9.103828801925E-17,-0.41)); +#8731 = VECTOR('',#8732,1.); +#8732 = DIRECTION('',(1.,0.)); +#8733 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8734 = ADVANCED_FACE('',(#8735),#4730,.F.); +#8735 = FACE_BOUND('',#8736,.F.); +#8736 = EDGE_LOOP('',(#8737,#8757,#8758,#8778)); +#8737 = ORIENTED_EDGE('',*,*,#8738,.F.); +#8738 = EDGE_CURVE('',#4665,#5423,#8739,.T.); +#8739 = SURFACE_CURVE('',#8740,(#8744,#8750),.PCURVE_S1.); +#8740 = LINE('',#8741,#8742); +#8741 = CARTESIAN_POINT('',(2.25,-1.475,1.025)); +#8742 = VECTOR('',#8743,1.); +#8743 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#8744 = PCURVE('',#4730,#8745); +#8745 = DEFINITIONAL_REPRESENTATION('',(#8746),#8749); +#8746 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#8747,#8748),.UNSPECIFIED.,.F., + .F.,(2,2),(0.3,0.375),.PIECEWISE_BEZIER_KNOTS.); +#8747 = CARTESIAN_POINT('',(5.65,1.712440990911E-15)); +#8748 = CARTESIAN_POINT('',(5.66336858006,1.)); +#8749 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8750 = PCURVE('',#5438,#8751); +#8751 = DEFINITIONAL_REPRESENTATION('',(#8752),#8756); +#8752 = LINE('',#8753,#8754); +#8753 = CARTESIAN_POINT('',(9.103828801925E-17,-0.41)); +#8754 = VECTOR('',#8755,1.); +#8755 = DIRECTION('',(1.,0.)); +#8756 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8757 = ORIENTED_EDGE('',*,*,#4716,.T.); +#8758 = ORIENTED_EDGE('',*,*,#8759,.T.); +#8759 = EDGE_CURVE('',#4694,#5451,#8760,.T.); +#8760 = SURFACE_CURVE('',#8761,(#8765,#8771),.PCURVE_S1.); +#8761 = LINE('',#8762,#8763); +#8762 = CARTESIAN_POINT('',(2.25,-2.335,1.025)); +#8763 = VECTOR('',#8764,1.); +#8764 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#8765 = PCURVE('',#4730,#8766); +#8766 = DEFINITIONAL_REPRESENTATION('',(#8767),#8770); +#8767 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#8768,#8769),.UNSPECIFIED.,.F., + .F.,(2,2),(0.3,0.375),.PIECEWISE_BEZIER_KNOTS.); +#8768 = CARTESIAN_POINT('',(6.51,1.986283945152E-16)); +#8769 = CARTESIAN_POINT('',(6.531163141994,1.)); +#8770 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8771 = PCURVE('',#5488,#8772); +#8772 = DEFINITIONAL_REPRESENTATION('',(#8773),#8777); +#8773 = LINE('',#8774,#8775); +#8774 = CARTESIAN_POINT('',(-0.,0.)); +#8775 = VECTOR('',#8776,1.); +#8776 = DIRECTION('',(1.,0.)); +#8777 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8778 = ORIENTED_EDGE('',*,*,#5450,.F.); +#8779 = ADVANCED_FACE('',(#8780),#4811,.F.); +#8780 = FACE_BOUND('',#8781,.F.); +#8781 = EDGE_LOOP('',(#8782,#8783,#8811,#8832)); +#8782 = ORIENTED_EDGE('',*,*,#4797,.T.); +#8783 = ORIENTED_EDGE('',*,*,#8784,.T.); +#8784 = EDGE_CURVE('',#4770,#8785,#8787,.T.); +#8785 = VERTEX_POINT('',#8786); +#8786 = CARTESIAN_POINT('',(2.35,1.065,0.725)); +#8787 = SURFACE_CURVE('',#8788,(#8793,#8800),.PCURVE_S1.); +#8788 = CIRCLE('',#8789,0.1); +#8789 = AXIS2_PLACEMENT_3D('',#8790,#8791,#8792); +#8790 = CARTESIAN_POINT('',(2.25,1.065,0.725)); +#8791 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#8792 = DIRECTION('',(4.440892098501E-15,9.860761315262E-31,1.)); +#8793 = PCURVE('',#4811,#8794); +#8794 = DEFINITIONAL_REPRESENTATION('',(#8795),#8799); +#8795 = LINE('',#8796,#8797); +#8796 = CARTESIAN_POINT('',(0.,-0.41)); +#8797 = VECTOR('',#8798,1.); +#8798 = DIRECTION('',(1.,0.)); +#8799 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8800 = PCURVE('',#4785,#8801); +#8801 = DEFINITIONAL_REPRESENTATION('',(#8802),#8810); +#8802 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#8803,#8804,#8805,#8806, +#8807,#8808,#8809),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#8803 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#8804 = CARTESIAN_POINT('',(0.292340342435,-7.415408746888E-03)); +#8805 = CARTESIAN_POINT('',(0.142340342435,7.918713163156E-02)); +#8806 = CARTESIAN_POINT('',(-7.659657565E-03,0.16578967201)); +#8807 = CARTESIAN_POINT('',(0.142340342435,0.252392212388)); +#8808 = CARTESIAN_POINT('',(0.292340342435,0.338994752767)); +#8809 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#8810 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8811 = ORIENTED_EDGE('',*,*,#8812,.F.); +#8812 = EDGE_CURVE('',#8171,#8785,#8813,.T.); +#8813 = SURFACE_CURVE('',#8814,(#8818,#8825),.PCURVE_S1.); +#8814 = LINE('',#8815,#8816); +#8815 = CARTESIAN_POINT('',(2.35,1.475,0.725)); +#8816 = VECTOR('',#8817,1.); +#8817 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#8818 = PCURVE('',#4811,#8819); +#8819 = DEFINITIONAL_REPRESENTATION('',(#8820),#8824); +#8820 = LINE('',#8821,#8822); +#8821 = CARTESIAN_POINT('',(1.570796326795,0.)); +#8822 = VECTOR('',#8823,1.); +#8823 = DIRECTION('',(0.,-1.)); +#8824 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8825 = PCURVE('',#8214,#8826); +#8826 = DEFINITIONAL_REPRESENTATION('',(#8827),#8831); +#8827 = LINE('',#8828,#8829); +#8828 = CARTESIAN_POINT('',(0.,0.)); +#8829 = VECTOR('',#8830,1.); +#8830 = DIRECTION('',(7.584527938158E-44,-1.)); +#8831 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8832 = ORIENTED_EDGE('',*,*,#8170,.F.); +#8833 = ADVANCED_FACE('',(#8834),#4785,.T.); +#8834 = FACE_BOUND('',#8835,.T.); +#8835 = EDGE_LOOP('',(#8836,#8837,#8838,#8839,#8862,#8886,#8909,#8932, + #8955,#8983,#9006,#9030)); +#8836 = ORIENTED_EDGE('',*,*,#4907,.F.); +#8837 = ORIENTED_EDGE('',*,*,#4769,.T.); +#8838 = ORIENTED_EDGE('',*,*,#8784,.T.); +#8839 = ORIENTED_EDGE('',*,*,#8840,.T.); +#8840 = EDGE_CURVE('',#8785,#8841,#8843,.T.); +#8841 = VERTEX_POINT('',#8842); +#8842 = CARTESIAN_POINT('',(2.35,1.065,0.3)); +#8843 = SURFACE_CURVE('',#8844,(#8848,#8855),.PCURVE_S1.); +#8844 = LINE('',#8845,#8846); +#8845 = CARTESIAN_POINT('',(2.35,1.065,0.725)); +#8846 = VECTOR('',#8847,1.); +#8847 = DIRECTION('',(1.044915787883E-15,2.320179133003E-31,-1.)); +#8848 = PCURVE('',#4785,#8849); +#8849 = DEFINITIONAL_REPRESENTATION('',(#8850),#8854); +#8850 = LINE('',#8851,#8852); +#8851 = CARTESIAN_POINT('',(0.192340342435,6.578967201E-02)); +#8852 = VECTOR('',#8853,1.); +#8853 = DIRECTION('',(-1.,-1.044915787883E-15)); +#8854 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8855 = PCURVE('',#8214,#8856); +#8856 = DEFINITIONAL_REPRESENTATION('',(#8857),#8861); +#8857 = LINE('',#8858,#8859); +#8858 = CARTESIAN_POINT('',(-9.512734445312E-32,-0.41)); +#8859 = VECTOR('',#8860,1.); +#8860 = DIRECTION('',(1.,0.)); +#8861 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8862 = ORIENTED_EDGE('',*,*,#8863,.T.); +#8863 = EDGE_CURVE('',#8841,#8864,#8866,.T.); +#8864 = VERTEX_POINT('',#8865); +#8865 = CARTESIAN_POINT('',(2.65,1.065,5.551115123126E-17)); +#8866 = SURFACE_CURVE('',#8867,(#8872,#8879),.PCURVE_S1.); +#8867 = CIRCLE('',#8868,0.3); +#8868 = AXIS2_PLACEMENT_3D('',#8869,#8870,#8871); +#8869 = CARTESIAN_POINT('',(2.65,1.065,0.3)); +#8870 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#8871 = DIRECTION('',(-1.,-2.22044604925E-16,3.515706244646E-15)); +#8872 = PCURVE('',#4785,#8873); +#8873 = DEFINITIONAL_REPRESENTATION('',(#8874),#8878); +#8874 = CIRCLE('',#8875,0.3); +#8875 = AXIS2_PLACEMENT_2D('',#8876,#8877); +#8876 = CARTESIAN_POINT('',(-0.232659657565,-0.23421032799)); +#8877 = DIRECTION('',(3.515706244646E-15,1.)); +#8878 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8879 = PCURVE('',#8243,#8880); +#8880 = DEFINITIONAL_REPRESENTATION('',(#8881),#8885); +#8881 = LINE('',#8882,#8883); +#8882 = CARTESIAN_POINT('',(6.28318530718,-0.41)); +#8883 = VECTOR('',#8884,1.); +#8884 = DIRECTION('',(-1.,-1.413579858428E-16)); +#8885 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8886 = ORIENTED_EDGE('',*,*,#8887,.T.); +#8887 = EDGE_CURVE('',#8864,#8888,#8890,.T.); +#8888 = VERTEX_POINT('',#8889); +#8889 = CARTESIAN_POINT('',(3.,1.065,5.551115123126E-17)); +#8890 = SURFACE_CURVE('',#8891,(#8895,#8902),.PCURVE_S1.); +#8891 = LINE('',#8892,#8893); +#8892 = CARTESIAN_POINT('',(2.65,1.065,5.551115123126E-17)); +#8893 = VECTOR('',#8894,1.); +#8894 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#8895 = PCURVE('',#4785,#8896); +#8896 = DEFINITIONAL_REPRESENTATION('',(#8897),#8901); +#8897 = LINE('',#8898,#8899); +#8898 = CARTESIAN_POINT('',(-0.532659657565,-0.23421032799)); +#8899 = VECTOR('',#8900,1.); +#8900 = DIRECTION('',(0.,-1.)); +#8901 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8902 = PCURVE('',#8271,#8903); +#8903 = DEFINITIONAL_REPRESENTATION('',(#8904),#8908); +#8904 = LINE('',#8905,#8906); +#8905 = CARTESIAN_POINT('',(-9.103828801925E-17,-0.41)); +#8906 = VECTOR('',#8907,1.); +#8907 = DIRECTION('',(1.,0.)); +#8908 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8909 = ORIENTED_EDGE('',*,*,#8910,.T.); +#8910 = EDGE_CURVE('',#8888,#8911,#8913,.T.); +#8911 = VERTEX_POINT('',#8912); +#8912 = CARTESIAN_POINT('',(3.,1.065,0.2)); +#8913 = SURFACE_CURVE('',#8914,(#8918,#8925),.PCURVE_S1.); +#8914 = LINE('',#8915,#8916); +#8915 = CARTESIAN_POINT('',(3.,1.065,5.551115123126E-17)); +#8916 = VECTOR('',#8917,1.); +#8917 = DIRECTION('',(0.,0.,1.)); +#8918 = PCURVE('',#4785,#8919); +#8919 = DEFINITIONAL_REPRESENTATION('',(#8920),#8924); +#8920 = LINE('',#8921,#8922); +#8921 = CARTESIAN_POINT('',(-0.532659657565,-0.58421032799)); +#8922 = VECTOR('',#8923,1.); +#8923 = DIRECTION('',(1.,0.)); +#8924 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8925 = PCURVE('',#8299,#8926); +#8926 = DEFINITIONAL_REPRESENTATION('',(#8927),#8931); +#8927 = LINE('',#8928,#8929); +#8928 = CARTESIAN_POINT('',(0.,-0.41)); +#8929 = VECTOR('',#8930,1.); +#8930 = DIRECTION('',(1.,0.)); +#8931 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8932 = ORIENTED_EDGE('',*,*,#8933,.T.); +#8933 = EDGE_CURVE('',#8911,#8934,#8936,.T.); +#8934 = VERTEX_POINT('',#8935); +#8935 = CARTESIAN_POINT('',(2.65,1.065,0.2)); +#8936 = SURFACE_CURVE('',#8937,(#8941,#8948),.PCURVE_S1.); +#8937 = LINE('',#8938,#8939); +#8938 = CARTESIAN_POINT('',(3.,1.065,0.2)); +#8939 = VECTOR('',#8940,1.); +#8940 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#8941 = PCURVE('',#4785,#8942); +#8942 = DEFINITIONAL_REPRESENTATION('',(#8943),#8947); +#8943 = LINE('',#8944,#8945); +#8944 = CARTESIAN_POINT('',(-0.332659657565,-0.58421032799)); +#8945 = VECTOR('',#8946,1.); +#8946 = DIRECTION('',(0.,1.)); +#8947 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8948 = PCURVE('',#8327,#8949); +#8949 = DEFINITIONAL_REPRESENTATION('',(#8950),#8954); +#8950 = LINE('',#8951,#8952); +#8951 = CARTESIAN_POINT('',(9.103828801925E-17,-0.41)); +#8952 = VECTOR('',#8953,1.); +#8953 = DIRECTION('',(1.,0.)); +#8954 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8955 = ORIENTED_EDGE('',*,*,#8956,.T.); +#8956 = EDGE_CURVE('',#8934,#8957,#8959,.T.); +#8957 = VERTEX_POINT('',#8958); +#8958 = CARTESIAN_POINT('',(2.55,1.065,0.3)); +#8959 = SURFACE_CURVE('',#8960,(#8965,#8976),.PCURVE_S1.); +#8960 = CIRCLE('',#8961,0.1); +#8961 = AXIS2_PLACEMENT_3D('',#8962,#8963,#8964); +#8962 = CARTESIAN_POINT('',(2.65,1.065,0.3)); +#8963 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#8964 = DIRECTION('',(0.,0.,-1.)); +#8965 = PCURVE('',#4785,#8966); +#8966 = DEFINITIONAL_REPRESENTATION('',(#8967),#8975); +#8967 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#8968,#8969,#8970,#8971, +#8972,#8973,#8974),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#8968 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#8969 = CARTESIAN_POINT('',(-0.332659657565,-6.100524723311E-02)); +#8970 = CARTESIAN_POINT('',(-0.182659657565,-0.147607787612)); +#8971 = CARTESIAN_POINT('',(-3.2659657565E-02,-0.23421032799)); +#8972 = CARTESIAN_POINT('',(-0.182659657565,-0.320812868368)); +#8973 = CARTESIAN_POINT('',(-0.332659657565,-0.407415408747)); +#8974 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#8975 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8976 = PCURVE('',#8360,#8977); +#8977 = DEFINITIONAL_REPRESENTATION('',(#8978),#8982); +#8978 = LINE('',#8979,#8980); +#8979 = CARTESIAN_POINT('',(0.,-0.41)); +#8980 = VECTOR('',#8981,1.); +#8981 = DIRECTION('',(1.,0.)); +#8982 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8983 = ORIENTED_EDGE('',*,*,#8984,.T.); +#8984 = EDGE_CURVE('',#8957,#8985,#8987,.T.); +#8985 = VERTEX_POINT('',#8986); +#8986 = CARTESIAN_POINT('',(2.55,1.065,0.725)); +#8987 = SURFACE_CURVE('',#8988,(#8992,#8999),.PCURVE_S1.); +#8988 = LINE('',#8989,#8990); +#8989 = CARTESIAN_POINT('',(2.55,1.065,0.3)); +#8990 = VECTOR('',#8991,1.); +#8991 = DIRECTION('',(0.,0.,1.)); +#8992 = PCURVE('',#4785,#8993); +#8993 = DEFINITIONAL_REPRESENTATION('',(#8994),#8998); +#8994 = LINE('',#8995,#8996); +#8995 = CARTESIAN_POINT('',(-0.232659657565,-0.13421032799)); +#8996 = VECTOR('',#8997,1.); +#8997 = DIRECTION('',(1.,0.)); +#8998 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#8999 = PCURVE('',#8388,#9000); +#9000 = DEFINITIONAL_REPRESENTATION('',(#9001),#9005); +#9001 = LINE('',#9002,#9003); +#9002 = CARTESIAN_POINT('',(0.,-0.41)); +#9003 = VECTOR('',#9004,1.); +#9004 = DIRECTION('',(1.,0.)); +#9005 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9006 = ORIENTED_EDGE('',*,*,#9007,.T.); +#9007 = EDGE_CURVE('',#8985,#9008,#9010,.T.); +#9008 = VERTEX_POINT('',#9009); +#9009 = CARTESIAN_POINT('',(2.25,1.065,1.025)); +#9010 = SURFACE_CURVE('',#9011,(#9016,#9023),.PCURVE_S1.); +#9011 = CIRCLE('',#9012,0.3); +#9012 = AXIS2_PLACEMENT_3D('',#9013,#9014,#9015); +#9013 = CARTESIAN_POINT('',(2.25,1.065,0.725)); +#9014 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#9015 = DIRECTION('',(1.,2.22044604925E-16,3.700743415417E-16)); +#9016 = PCURVE('',#4785,#9017); +#9017 = DEFINITIONAL_REPRESENTATION('',(#9018),#9022); +#9018 = CIRCLE('',#9019,0.3); +#9019 = AXIS2_PLACEMENT_2D('',#9020,#9021); +#9020 = CARTESIAN_POINT('',(0.192340342435,0.16578967201)); +#9021 = DIRECTION('',(3.700743415417E-16,-1.)); +#9022 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9023 = PCURVE('',#8417,#9024); +#9024 = DEFINITIONAL_REPRESENTATION('',(#9025),#9029); +#9025 = LINE('',#9026,#9027); +#9026 = CARTESIAN_POINT('',(6.28318530718,-0.41)); +#9027 = VECTOR('',#9028,1.); +#9028 = DIRECTION('',(-1.,1.413579858428E-16)); +#9029 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9030 = ORIENTED_EDGE('',*,*,#9031,.T.); +#9031 = EDGE_CURVE('',#9008,#4908,#9032,.T.); +#9032 = SURFACE_CURVE('',#9033,(#9037,#9044),.PCURVE_S1.); +#9033 = LINE('',#9034,#9035); +#9034 = CARTESIAN_POINT('',(2.25,1.065,1.025)); +#9035 = VECTOR('',#9036,1.); +#9036 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#9037 = PCURVE('',#4785,#9038); +#9038 = DEFINITIONAL_REPRESENTATION('',(#9039),#9043); +#9039 = LINE('',#9040,#9041); +#9040 = CARTESIAN_POINT('',(0.492340342435,0.16578967201)); +#9041 = VECTOR('',#9042,1.); +#9042 = DIRECTION('',(0.,1.)); +#9043 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9044 = PCURVE('',#5338,#9045); +#9045 = DEFINITIONAL_REPRESENTATION('',(#9046),#9050); +#9046 = LINE('',#9047,#9048); +#9047 = CARTESIAN_POINT('',(9.103828801925E-17,-0.41)); +#9048 = VECTOR('',#9049,1.); +#9049 = DIRECTION('',(1.,0.)); +#9050 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9051 = ADVANCED_FACE('',(#9052),#4842,.F.); +#9052 = FACE_BOUND('',#9053,.F.); +#9053 = EDGE_LOOP('',(#9054,#9055,#9056,#9084,#9107,#9131,#9154,#9177, + #9200,#9228,#9251,#9275)); +#9054 = ORIENTED_EDGE('',*,*,#5017,.F.); +#9055 = ORIENTED_EDGE('',*,*,#4826,.T.); +#9056 = ORIENTED_EDGE('',*,*,#9057,.T.); +#9057 = EDGE_CURVE('',#4827,#9058,#9060,.T.); +#9058 = VERTEX_POINT('',#9059); +#9059 = CARTESIAN_POINT('',(2.35,-1.065,0.725)); +#9060 = SURFACE_CURVE('',#9061,(#9066,#9077),.PCURVE_S1.); +#9061 = CIRCLE('',#9062,0.1); +#9062 = AXIS2_PLACEMENT_3D('',#9063,#9064,#9065); +#9063 = CARTESIAN_POINT('',(2.25,-1.065,0.725)); +#9064 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#9065 = DIRECTION('',(4.440892098501E-15,9.860761315262E-31,1.)); +#9066 = PCURVE('',#4842,#9067); +#9067 = DEFINITIONAL_REPRESENTATION('',(#9068),#9076); +#9068 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#9069,#9070,#9071,#9072, +#9073,#9074,#9075),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#9069 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#9070 = CARTESIAN_POINT('',(0.292340342435,-7.415408746888E-03)); +#9071 = CARTESIAN_POINT('',(0.142340342435,7.918713163156E-02)); +#9072 = CARTESIAN_POINT('',(-7.659657565E-03,0.16578967201)); +#9073 = CARTESIAN_POINT('',(0.142340342435,0.252392212388)); +#9074 = CARTESIAN_POINT('',(0.292340342435,0.338994752767)); +#9075 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#9076 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9077 = PCURVE('',#4892,#9078); +#9078 = DEFINITIONAL_REPRESENTATION('',(#9079),#9083); +#9079 = LINE('',#9080,#9081); +#9080 = CARTESIAN_POINT('',(0.,0.)); +#9081 = VECTOR('',#9082,1.); +#9082 = DIRECTION('',(1.,0.)); +#9083 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9084 = ORIENTED_EDGE('',*,*,#9085,.T.); +#9085 = EDGE_CURVE('',#9058,#9086,#9088,.T.); +#9086 = VERTEX_POINT('',#9087); +#9087 = CARTESIAN_POINT('',(2.35,-1.065,0.3)); +#9088 = SURFACE_CURVE('',#9089,(#9093,#9100),.PCURVE_S1.); +#9089 = LINE('',#9090,#9091); +#9090 = CARTESIAN_POINT('',(2.35,-1.065,0.725)); +#9091 = VECTOR('',#9092,1.); +#9092 = DIRECTION('',(1.044915787883E-15,2.320179133003E-31,-1.)); +#9093 = PCURVE('',#4842,#9094); +#9094 = DEFINITIONAL_REPRESENTATION('',(#9095),#9099); +#9095 = LINE('',#9096,#9097); +#9096 = CARTESIAN_POINT('',(0.192340342435,6.578967201E-02)); +#9097 = VECTOR('',#9098,1.); +#9098 = DIRECTION('',(-1.,-1.044915787883E-15)); +#9099 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9100 = PCURVE('',#8499,#9101); +#9101 = DEFINITIONAL_REPRESENTATION('',(#9102),#9106); +#9102 = LINE('',#9103,#9104); +#9103 = CARTESIAN_POINT('',(0.,0.)); +#9104 = VECTOR('',#9105,1.); +#9105 = DIRECTION('',(1.,0.)); +#9106 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9107 = ORIENTED_EDGE('',*,*,#9108,.T.); +#9108 = EDGE_CURVE('',#9086,#9109,#9111,.T.); +#9109 = VERTEX_POINT('',#9110); +#9110 = CARTESIAN_POINT('',(2.65,-1.065,5.551115123126E-17)); +#9111 = SURFACE_CURVE('',#9112,(#9117,#9124),.PCURVE_S1.); +#9112 = CIRCLE('',#9113,0.3); +#9113 = AXIS2_PLACEMENT_3D('',#9114,#9115,#9116); +#9114 = CARTESIAN_POINT('',(2.65,-1.065,0.3)); +#9115 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#9116 = DIRECTION('',(-1.,-2.22044604925E-16,3.515706244646E-15)); +#9117 = PCURVE('',#4842,#9118); +#9118 = DEFINITIONAL_REPRESENTATION('',(#9119),#9123); +#9119 = CIRCLE('',#9120,0.3); +#9120 = AXIS2_PLACEMENT_2D('',#9121,#9122); +#9121 = CARTESIAN_POINT('',(-0.232659657565,-0.23421032799)); +#9122 = DIRECTION('',(3.515706244646E-15,1.)); +#9123 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9124 = PCURVE('',#8528,#9125); +#9125 = DEFINITIONAL_REPRESENTATION('',(#9126),#9130); +#9126 = LINE('',#9127,#9128); +#9127 = CARTESIAN_POINT('',(6.28318530718,2.22044604925E-16)); +#9128 = VECTOR('',#9129,1.); +#9129 = DIRECTION('',(-1.,-1.413579858428E-16)); +#9130 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9131 = ORIENTED_EDGE('',*,*,#9132,.T.); +#9132 = EDGE_CURVE('',#9109,#9133,#9135,.T.); +#9133 = VERTEX_POINT('',#9134); +#9134 = CARTESIAN_POINT('',(3.,-1.065,5.551115123126E-17)); +#9135 = SURFACE_CURVE('',#9136,(#9140,#9147),.PCURVE_S1.); +#9136 = LINE('',#9137,#9138); +#9137 = CARTESIAN_POINT('',(2.65,-1.065,5.551115123126E-17)); +#9138 = VECTOR('',#9139,1.); +#9139 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#9140 = PCURVE('',#4842,#9141); +#9141 = DEFINITIONAL_REPRESENTATION('',(#9142),#9146); +#9142 = LINE('',#9143,#9144); +#9143 = CARTESIAN_POINT('',(-0.532659657565,-0.23421032799)); +#9144 = VECTOR('',#9145,1.); +#9145 = DIRECTION('',(0.,-1.)); +#9146 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9147 = PCURVE('',#8556,#9148); +#9148 = DEFINITIONAL_REPRESENTATION('',(#9149),#9153); +#9149 = LINE('',#9150,#9151); +#9150 = CARTESIAN_POINT('',(0.,0.)); +#9151 = VECTOR('',#9152,1.); +#9152 = DIRECTION('',(1.,0.)); +#9153 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9154 = ORIENTED_EDGE('',*,*,#9155,.T.); +#9155 = EDGE_CURVE('',#9133,#9156,#9158,.T.); +#9156 = VERTEX_POINT('',#9157); +#9157 = CARTESIAN_POINT('',(3.,-1.065,0.2)); +#9158 = SURFACE_CURVE('',#9159,(#9163,#9170),.PCURVE_S1.); +#9159 = LINE('',#9160,#9161); +#9160 = CARTESIAN_POINT('',(3.,-1.065,5.551115123126E-17)); +#9161 = VECTOR('',#9162,1.); +#9162 = DIRECTION('',(0.,0.,1.)); +#9163 = PCURVE('',#4842,#9164); +#9164 = DEFINITIONAL_REPRESENTATION('',(#9165),#9169); +#9165 = LINE('',#9166,#9167); +#9166 = CARTESIAN_POINT('',(-0.532659657565,-0.58421032799)); +#9167 = VECTOR('',#9168,1.); +#9168 = DIRECTION('',(1.,0.)); +#9169 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9170 = PCURVE('',#8584,#9171); +#9171 = DEFINITIONAL_REPRESENTATION('',(#9172),#9176); +#9172 = LINE('',#9173,#9174); +#9173 = CARTESIAN_POINT('',(0.,0.)); +#9174 = VECTOR('',#9175,1.); +#9175 = DIRECTION('',(1.,0.)); +#9176 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9177 = ORIENTED_EDGE('',*,*,#9178,.T.); +#9178 = EDGE_CURVE('',#9156,#9179,#9181,.T.); +#9179 = VERTEX_POINT('',#9180); +#9180 = CARTESIAN_POINT('',(2.65,-1.065,0.2)); +#9181 = SURFACE_CURVE('',#9182,(#9186,#9193),.PCURVE_S1.); +#9182 = LINE('',#9183,#9184); +#9183 = CARTESIAN_POINT('',(3.,-1.065,0.2)); +#9184 = VECTOR('',#9185,1.); +#9185 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#9186 = PCURVE('',#4842,#9187); +#9187 = DEFINITIONAL_REPRESENTATION('',(#9188),#9192); +#9188 = LINE('',#9189,#9190); +#9189 = CARTESIAN_POINT('',(-0.332659657565,-0.58421032799)); +#9190 = VECTOR('',#9191,1.); +#9191 = DIRECTION('',(0.,1.)); +#9192 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9193 = PCURVE('',#8612,#9194); +#9194 = DEFINITIONAL_REPRESENTATION('',(#9195),#9199); +#9195 = LINE('',#9196,#9197); +#9196 = CARTESIAN_POINT('',(-0.,0.)); +#9197 = VECTOR('',#9198,1.); +#9198 = DIRECTION('',(1.,0.)); +#9199 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9200 = ORIENTED_EDGE('',*,*,#9201,.T.); +#9201 = EDGE_CURVE('',#9179,#9202,#9204,.T.); +#9202 = VERTEX_POINT('',#9203); +#9203 = CARTESIAN_POINT('',(2.55,-1.065,0.3)); +#9204 = SURFACE_CURVE('',#9205,(#9210,#9221),.PCURVE_S1.); +#9205 = CIRCLE('',#9206,0.1); +#9206 = AXIS2_PLACEMENT_3D('',#9207,#9208,#9209); +#9207 = CARTESIAN_POINT('',(2.65,-1.065,0.3)); +#9208 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#9209 = DIRECTION('',(0.,0.,-1.)); +#9210 = PCURVE('',#4842,#9211); +#9211 = DEFINITIONAL_REPRESENTATION('',(#9212),#9220); +#9212 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#9213,#9214,#9215,#9216, +#9217,#9218,#9219),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#9213 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#9214 = CARTESIAN_POINT('',(-0.332659657565,-6.100524723311E-02)); +#9215 = CARTESIAN_POINT('',(-0.182659657565,-0.147607787612)); +#9216 = CARTESIAN_POINT('',(-3.2659657565E-02,-0.23421032799)); +#9217 = CARTESIAN_POINT('',(-0.182659657565,-0.320812868368)); +#9218 = CARTESIAN_POINT('',(-0.332659657565,-0.407415408747)); +#9219 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#9220 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9221 = PCURVE('',#8645,#9222); +#9222 = DEFINITIONAL_REPRESENTATION('',(#9223),#9227); +#9223 = LINE('',#9224,#9225); +#9224 = CARTESIAN_POINT('',(0.,0.)); +#9225 = VECTOR('',#9226,1.); +#9226 = DIRECTION('',(1.,0.)); +#9227 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9228 = ORIENTED_EDGE('',*,*,#9229,.T.); +#9229 = EDGE_CURVE('',#9202,#9230,#9232,.T.); +#9230 = VERTEX_POINT('',#9231); +#9231 = CARTESIAN_POINT('',(2.55,-1.065,0.725)); +#9232 = SURFACE_CURVE('',#9233,(#9237,#9244),.PCURVE_S1.); +#9233 = LINE('',#9234,#9235); +#9234 = CARTESIAN_POINT('',(2.55,-1.065,0.3)); +#9235 = VECTOR('',#9236,1.); +#9236 = DIRECTION('',(0.,0.,1.)); +#9237 = PCURVE('',#4842,#9238); +#9238 = DEFINITIONAL_REPRESENTATION('',(#9239),#9243); +#9239 = LINE('',#9240,#9241); +#9240 = CARTESIAN_POINT('',(-0.232659657565,-0.13421032799)); +#9241 = VECTOR('',#9242,1.); +#9242 = DIRECTION('',(1.,0.)); +#9243 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9244 = PCURVE('',#8673,#9245); +#9245 = DEFINITIONAL_REPRESENTATION('',(#9246),#9250); +#9246 = LINE('',#9247,#9248); +#9247 = CARTESIAN_POINT('',(0.,0.)); +#9248 = VECTOR('',#9249,1.); +#9249 = DIRECTION('',(1.,0.)); +#9250 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9251 = ORIENTED_EDGE('',*,*,#9252,.T.); +#9252 = EDGE_CURVE('',#9230,#9253,#9255,.T.); +#9253 = VERTEX_POINT('',#9254); +#9254 = CARTESIAN_POINT('',(2.25,-1.065,1.025)); +#9255 = SURFACE_CURVE('',#9256,(#9261,#9268),.PCURVE_S1.); +#9256 = CIRCLE('',#9257,0.3); +#9257 = AXIS2_PLACEMENT_3D('',#9258,#9259,#9260); +#9258 = CARTESIAN_POINT('',(2.25,-1.065,0.725)); +#9259 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#9260 = DIRECTION('',(1.,2.22044604925E-16,3.700743415417E-16)); +#9261 = PCURVE('',#4842,#9262); +#9262 = DEFINITIONAL_REPRESENTATION('',(#9263),#9267); +#9263 = CIRCLE('',#9264,0.3); +#9264 = AXIS2_PLACEMENT_2D('',#9265,#9266); +#9265 = CARTESIAN_POINT('',(0.192340342435,0.16578967201)); +#9266 = DIRECTION('',(3.700743415417E-16,-1.)); +#9267 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9268 = PCURVE('',#8702,#9269); +#9269 = DEFINITIONAL_REPRESENTATION('',(#9270),#9274); +#9270 = LINE('',#9271,#9272); +#9271 = CARTESIAN_POINT('',(6.28318530718,-2.22044604925E-16)); +#9272 = VECTOR('',#9273,1.); +#9273 = DIRECTION('',(-1.,1.413579858428E-16)); +#9274 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9275 = ORIENTED_EDGE('',*,*,#9276,.T.); +#9276 = EDGE_CURVE('',#9253,#5018,#9277,.T.); +#9277 = SURFACE_CURVE('',#9278,(#9282,#9289),.PCURVE_S1.); +#9278 = LINE('',#9279,#9280); +#9279 = CARTESIAN_POINT('',(2.25,-1.065,1.025)); +#9280 = VECTOR('',#9281,1.); +#9281 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#9282 = PCURVE('',#4842,#9283); +#9283 = DEFINITIONAL_REPRESENTATION('',(#9284),#9288); +#9284 = LINE('',#9285,#9286); +#9285 = CARTESIAN_POINT('',(0.492340342435,0.16578967201)); +#9286 = VECTOR('',#9287,1.); +#9287 = DIRECTION('',(0.,1.)); +#9288 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9289 = PCURVE('',#5438,#9290); +#9290 = DEFINITIONAL_REPRESENTATION('',(#9291),#9295); +#9291 = LINE('',#9292,#9293); +#9292 = CARTESIAN_POINT('',(-0.,0.)); +#9293 = VECTOR('',#9294,1.); +#9294 = DIRECTION('',(1.,0.)); +#9295 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9296 = ADVANCED_FACE('',(#9297),#4892,.F.); +#9297 = FACE_BOUND('',#9298,.F.); +#9298 = EDGE_LOOP('',(#9299,#9300,#9301,#9322)); +#9299 = ORIENTED_EDGE('',*,*,#4878,.T.); +#9300 = ORIENTED_EDGE('',*,*,#8455,.T.); +#9301 = ORIENTED_EDGE('',*,*,#9302,.F.); +#9302 = EDGE_CURVE('',#9058,#8456,#9303,.T.); +#9303 = SURFACE_CURVE('',#9304,(#9308,#9315),.PCURVE_S1.); +#9304 = LINE('',#9305,#9306); +#9305 = CARTESIAN_POINT('',(2.35,-1.065,0.725)); +#9306 = VECTOR('',#9307,1.); +#9307 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#9308 = PCURVE('',#4892,#9309); +#9309 = DEFINITIONAL_REPRESENTATION('',(#9310),#9314); +#9310 = LINE('',#9311,#9312); +#9311 = CARTESIAN_POINT('',(1.570796326795,0.)); +#9312 = VECTOR('',#9313,1.); +#9313 = DIRECTION('',(0.,-1.)); +#9314 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9315 = PCURVE('',#8499,#9316); +#9316 = DEFINITIONAL_REPRESENTATION('',(#9317),#9321); +#9317 = LINE('',#9318,#9319); +#9318 = CARTESIAN_POINT('',(0.,0.)); +#9319 = VECTOR('',#9320,1.); +#9320 = DIRECTION('',(7.584527938158E-44,-1.)); +#9321 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9322 = ORIENTED_EDGE('',*,*,#9057,.F.); +#9323 = ADVANCED_FACE('',(#9324),#4973,.F.); +#9324 = FACE_BOUND('',#9325,.F.); +#9325 = EDGE_LOOP('',(#9326,#9346,#9347,#9367)); +#9326 = ORIENTED_EDGE('',*,*,#9327,.F.); +#9327 = EDGE_CURVE('',#4908,#5323,#9328,.T.); +#9328 = SURFACE_CURVE('',#9329,(#9333,#9339),.PCURVE_S1.); +#9329 = LINE('',#9330,#9331); +#9330 = CARTESIAN_POINT('',(2.25,1.065,1.025)); +#9331 = VECTOR('',#9332,1.); +#9332 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#9333 = PCURVE('',#4973,#9334); +#9334 = DEFINITIONAL_REPRESENTATION('',(#9335),#9338); +#9335 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9336,#9337),.UNSPECIFIED.,.F., + .F.,(2,2),(0.3,0.375),.PIECEWISE_BEZIER_KNOTS.); +#9336 = CARTESIAN_POINT('',(3.11,2.164324594237E-15)); +#9337 = CARTESIAN_POINT('',(3.100347432024,1.)); +#9338 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9339 = PCURVE('',#5338,#9340); +#9340 = DEFINITIONAL_REPRESENTATION('',(#9341),#9345); +#9341 = LINE('',#9342,#9343); +#9342 = CARTESIAN_POINT('',(9.103828801925E-17,-0.41)); +#9343 = VECTOR('',#9344,1.); +#9344 = DIRECTION('',(1.,0.)); +#9345 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9346 = ORIENTED_EDGE('',*,*,#4959,.T.); +#9347 = ORIENTED_EDGE('',*,*,#9348,.T.); +#9348 = EDGE_CURVE('',#4932,#5351,#9349,.T.); +#9349 = SURFACE_CURVE('',#9350,(#9354,#9360),.PCURVE_S1.); +#9350 = LINE('',#9351,#9352); +#9351 = CARTESIAN_POINT('',(2.25,0.205,1.025)); +#9352 = VECTOR('',#9353,1.); +#9353 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#9354 = PCURVE('',#4973,#9355); +#9355 = DEFINITIONAL_REPRESENTATION('',(#9356),#9359); +#9356 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9357,#9358),.UNSPECIFIED.,.F., + .F.,(2,2),(0.3,0.375),.PIECEWISE_BEZIER_KNOTS.); +#9357 = CARTESIAN_POINT('',(3.97,2.076706495586E-15)); +#9358 = CARTESIAN_POINT('',(3.968141993958,1.)); +#9359 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9360 = PCURVE('',#5388,#9361); +#9361 = DEFINITIONAL_REPRESENTATION('',(#9362),#9366); +#9362 = LINE('',#9363,#9364); +#9363 = CARTESIAN_POINT('',(-0.,0.)); +#9364 = VECTOR('',#9365,1.); +#9365 = DIRECTION('',(1.,0.)); +#9366 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9367 = ORIENTED_EDGE('',*,*,#5350,.F.); +#9368 = ADVANCED_FACE('',(#9369),#4947,.F.); +#9369 = FACE_BOUND('',#9370,.F.); +#9370 = EDGE_LOOP('',(#9371,#9372,#9373,#9401,#9429,#9458,#9486,#9514, + #9542,#9575,#9603,#9632)); +#9371 = ORIENTED_EDGE('',*,*,#4931,.F.); +#9372 = ORIENTED_EDGE('',*,*,#5069,.T.); +#9373 = ORIENTED_EDGE('',*,*,#9374,.T.); +#9374 = EDGE_CURVE('',#5070,#9375,#9377,.T.); +#9375 = VERTEX_POINT('',#9376); +#9376 = CARTESIAN_POINT('',(2.35,0.205,0.725)); +#9377 = SURFACE_CURVE('',#9378,(#9383,#9394),.PCURVE_S1.); +#9378 = CIRCLE('',#9379,0.1); +#9379 = AXIS2_PLACEMENT_3D('',#9380,#9381,#9382); +#9380 = CARTESIAN_POINT('',(2.25,0.205,0.725)); +#9381 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#9382 = DIRECTION('',(4.440892098501E-15,9.860761315262E-31,1.)); +#9383 = PCURVE('',#4947,#9384); +#9384 = DEFINITIONAL_REPRESENTATION('',(#9385),#9393); +#9385 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#9386,#9387,#9388,#9389, +#9390,#9391,#9392),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#9386 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#9387 = CARTESIAN_POINT('',(0.292340342435,-7.415408746888E-03)); +#9388 = CARTESIAN_POINT('',(0.142340342435,7.918713163156E-02)); +#9389 = CARTESIAN_POINT('',(-7.659657565E-03,0.16578967201)); +#9390 = CARTESIAN_POINT('',(0.142340342435,0.252392212388)); +#9391 = CARTESIAN_POINT('',(0.292340342435,0.338994752767)); +#9392 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#9393 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9394 = PCURVE('',#5130,#9395); +#9395 = DEFINITIONAL_REPRESENTATION('',(#9396),#9400); +#9396 = LINE('',#9397,#9398); +#9397 = CARTESIAN_POINT('',(0.,0.)); +#9398 = VECTOR('',#9399,1.); +#9399 = DIRECTION('',(1.,0.)); +#9400 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9401 = ORIENTED_EDGE('',*,*,#9402,.T.); +#9402 = EDGE_CURVE('',#9375,#9403,#9405,.T.); +#9403 = VERTEX_POINT('',#9404); +#9404 = CARTESIAN_POINT('',(2.35,0.205,0.3)); +#9405 = SURFACE_CURVE('',#9406,(#9410,#9417),.PCURVE_S1.); +#9406 = LINE('',#9407,#9408); +#9407 = CARTESIAN_POINT('',(2.35,0.205,0.725)); +#9408 = VECTOR('',#9409,1.); +#9409 = DIRECTION('',(1.044915787883E-15,2.320179133003E-31,-1.)); +#9410 = PCURVE('',#4947,#9411); +#9411 = DEFINITIONAL_REPRESENTATION('',(#9412),#9416); +#9412 = LINE('',#9413,#9414); +#9413 = CARTESIAN_POINT('',(0.192340342435,6.578967201E-02)); +#9414 = VECTOR('',#9415,1.); +#9415 = DIRECTION('',(-1.,-1.044915787883E-15)); +#9416 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9417 = PCURVE('',#9418,#9423); +#9418 = PLANE('',#9419); +#9419 = AXIS2_PLACEMENT_3D('',#9420,#9421,#9422); +#9420 = CARTESIAN_POINT('',(2.35,0.205,0.725)); +#9421 = DIRECTION('',(1.,2.22044604925E-16,1.044915787883E-15)); +#9422 = DIRECTION('',(1.044915787883E-15,2.320179133003E-31,-1.)); +#9423 = DEFINITIONAL_REPRESENTATION('',(#9424),#9428); +#9424 = LINE('',#9425,#9426); +#9425 = CARTESIAN_POINT('',(0.,0.)); +#9426 = VECTOR('',#9427,1.); +#9427 = DIRECTION('',(1.,0.)); +#9428 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9429 = ORIENTED_EDGE('',*,*,#9430,.T.); +#9430 = EDGE_CURVE('',#9403,#9431,#9433,.T.); +#9431 = VERTEX_POINT('',#9432); +#9432 = CARTESIAN_POINT('',(2.65,0.205,5.551115123126E-17)); +#9433 = SURFACE_CURVE('',#9434,(#9439,#9446),.PCURVE_S1.); +#9434 = CIRCLE('',#9435,0.3); +#9435 = AXIS2_PLACEMENT_3D('',#9436,#9437,#9438); +#9436 = CARTESIAN_POINT('',(2.65,0.205,0.3)); +#9437 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#9438 = DIRECTION('',(-1.,-2.22044604925E-16,3.515706244646E-15)); +#9439 = PCURVE('',#4947,#9440); +#9440 = DEFINITIONAL_REPRESENTATION('',(#9441),#9445); +#9441 = CIRCLE('',#9442,0.3); +#9442 = AXIS2_PLACEMENT_2D('',#9443,#9444); +#9443 = CARTESIAN_POINT('',(-0.232659657565,-0.23421032799)); +#9444 = DIRECTION('',(3.515706244646E-15,1.)); +#9445 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9446 = PCURVE('',#9447,#9452); +#9447 = CYLINDRICAL_SURFACE('',#9448,0.3); +#9448 = AXIS2_PLACEMENT_3D('',#9449,#9450,#9451); +#9449 = CARTESIAN_POINT('',(2.65,0.205,0.3)); +#9450 = DIRECTION('',(-2.22044604925E-16,1.,-0.)); +#9451 = DIRECTION('',(-1.,-2.22044604925E-16,3.515706244646E-15)); +#9452 = DEFINITIONAL_REPRESENTATION('',(#9453),#9457); +#9453 = LINE('',#9454,#9455); +#9454 = CARTESIAN_POINT('',(6.28318530718,0.)); +#9455 = VECTOR('',#9456,1.); +#9456 = DIRECTION('',(-1.,0.)); +#9457 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9458 = ORIENTED_EDGE('',*,*,#9459,.T.); +#9459 = EDGE_CURVE('',#9431,#9460,#9462,.T.); +#9460 = VERTEX_POINT('',#9461); +#9461 = CARTESIAN_POINT('',(3.,0.205,5.551115123126E-17)); +#9462 = SURFACE_CURVE('',#9463,(#9467,#9474),.PCURVE_S1.); +#9463 = LINE('',#9464,#9465); +#9464 = CARTESIAN_POINT('',(2.65,0.205,5.551115123126E-17)); +#9465 = VECTOR('',#9466,1.); +#9466 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#9467 = PCURVE('',#4947,#9468); +#9468 = DEFINITIONAL_REPRESENTATION('',(#9469),#9473); +#9469 = LINE('',#9470,#9471); +#9470 = CARTESIAN_POINT('',(-0.532659657565,-0.23421032799)); +#9471 = VECTOR('',#9472,1.); +#9472 = DIRECTION('',(0.,-1.)); +#9473 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9474 = PCURVE('',#9475,#9480); +#9475 = PLANE('',#9476); +#9476 = AXIS2_PLACEMENT_3D('',#9477,#9478,#9479); +#9477 = CARTESIAN_POINT('',(2.65,0.205,5.551115123126E-17)); +#9478 = DIRECTION('',(0.,0.,1.)); +#9479 = DIRECTION('',(1.,2.22044604925E-16,-0.)); +#9480 = DEFINITIONAL_REPRESENTATION('',(#9481),#9485); +#9481 = LINE('',#9482,#9483); +#9482 = CARTESIAN_POINT('',(0.,0.)); +#9483 = VECTOR('',#9484,1.); +#9484 = DIRECTION('',(1.,0.)); +#9485 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9486 = ORIENTED_EDGE('',*,*,#9487,.T.); +#9487 = EDGE_CURVE('',#9460,#9488,#9490,.T.); +#9488 = VERTEX_POINT('',#9489); +#9489 = CARTESIAN_POINT('',(3.,0.205,0.2)); +#9490 = SURFACE_CURVE('',#9491,(#9495,#9502),.PCURVE_S1.); +#9491 = LINE('',#9492,#9493); +#9492 = CARTESIAN_POINT('',(3.,0.205,5.551115123126E-17)); +#9493 = VECTOR('',#9494,1.); +#9494 = DIRECTION('',(0.,0.,1.)); +#9495 = PCURVE('',#4947,#9496); +#9496 = DEFINITIONAL_REPRESENTATION('',(#9497),#9501); +#9497 = LINE('',#9498,#9499); +#9498 = CARTESIAN_POINT('',(-0.532659657565,-0.58421032799)); +#9499 = VECTOR('',#9500,1.); +#9500 = DIRECTION('',(1.,0.)); +#9501 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9502 = PCURVE('',#9503,#9508); +#9503 = PLANE('',#9504); +#9504 = AXIS2_PLACEMENT_3D('',#9505,#9506,#9507); +#9505 = CARTESIAN_POINT('',(3.,0.205,5.551115123126E-17)); +#9506 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#9507 = DIRECTION('',(0.,0.,1.)); +#9508 = DEFINITIONAL_REPRESENTATION('',(#9509),#9513); +#9509 = LINE('',#9510,#9511); +#9510 = CARTESIAN_POINT('',(0.,0.)); +#9511 = VECTOR('',#9512,1.); +#9512 = DIRECTION('',(1.,0.)); +#9513 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9514 = ORIENTED_EDGE('',*,*,#9515,.T.); +#9515 = EDGE_CURVE('',#9488,#9516,#9518,.T.); +#9516 = VERTEX_POINT('',#9517); +#9517 = CARTESIAN_POINT('',(2.65,0.205,0.2)); +#9518 = SURFACE_CURVE('',#9519,(#9523,#9530),.PCURVE_S1.); +#9519 = LINE('',#9520,#9521); +#9520 = CARTESIAN_POINT('',(3.,0.205,0.2)); +#9521 = VECTOR('',#9522,1.); +#9522 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#9523 = PCURVE('',#4947,#9524); +#9524 = DEFINITIONAL_REPRESENTATION('',(#9525),#9529); +#9525 = LINE('',#9526,#9527); +#9526 = CARTESIAN_POINT('',(-0.332659657565,-0.58421032799)); +#9527 = VECTOR('',#9528,1.); +#9528 = DIRECTION('',(0.,1.)); +#9529 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9530 = PCURVE('',#9531,#9536); +#9531 = PLANE('',#9532); +#9532 = AXIS2_PLACEMENT_3D('',#9533,#9534,#9535); +#9533 = CARTESIAN_POINT('',(3.,0.205,0.2)); +#9534 = DIRECTION('',(0.,0.,-1.)); +#9535 = DIRECTION('',(-1.,-2.22044604925E-16,-0.)); +#9536 = DEFINITIONAL_REPRESENTATION('',(#9537),#9541); +#9537 = LINE('',#9538,#9539); +#9538 = CARTESIAN_POINT('',(-0.,0.)); +#9539 = VECTOR('',#9540,1.); +#9540 = DIRECTION('',(1.,0.)); +#9541 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9542 = ORIENTED_EDGE('',*,*,#9543,.T.); +#9543 = EDGE_CURVE('',#9516,#9544,#9546,.T.); +#9544 = VERTEX_POINT('',#9545); +#9545 = CARTESIAN_POINT('',(2.55,0.205,0.3)); +#9546 = SURFACE_CURVE('',#9547,(#9552,#9563),.PCURVE_S1.); +#9547 = CIRCLE('',#9548,0.1); +#9548 = AXIS2_PLACEMENT_3D('',#9549,#9550,#9551); +#9549 = CARTESIAN_POINT('',(2.65,0.205,0.3)); +#9550 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#9551 = DIRECTION('',(0.,0.,-1.)); +#9552 = PCURVE('',#4947,#9553); +#9553 = DEFINITIONAL_REPRESENTATION('',(#9554),#9562); +#9554 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#9555,#9556,#9557,#9558, +#9559,#9560,#9561),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#9555 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#9556 = CARTESIAN_POINT('',(-0.332659657565,-6.100524723311E-02)); +#9557 = CARTESIAN_POINT('',(-0.182659657565,-0.147607787612)); +#9558 = CARTESIAN_POINT('',(-3.2659657565E-02,-0.23421032799)); +#9559 = CARTESIAN_POINT('',(-0.182659657565,-0.320812868368)); +#9560 = CARTESIAN_POINT('',(-0.332659657565,-0.407415408747)); +#9561 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#9562 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9563 = PCURVE('',#9564,#9569); +#9564 = CYLINDRICAL_SURFACE('',#9565,0.1); +#9565 = AXIS2_PLACEMENT_3D('',#9566,#9567,#9568); +#9566 = CARTESIAN_POINT('',(2.65,0.205,0.3)); +#9567 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#9568 = DIRECTION('',(0.,0.,-1.)); +#9569 = DEFINITIONAL_REPRESENTATION('',(#9570),#9574); +#9570 = LINE('',#9571,#9572); +#9571 = CARTESIAN_POINT('',(0.,0.)); +#9572 = VECTOR('',#9573,1.); +#9573 = DIRECTION('',(1.,0.)); +#9574 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9575 = ORIENTED_EDGE('',*,*,#9576,.T.); +#9576 = EDGE_CURVE('',#9544,#9577,#9579,.T.); +#9577 = VERTEX_POINT('',#9578); +#9578 = CARTESIAN_POINT('',(2.55,0.205,0.725)); +#9579 = SURFACE_CURVE('',#9580,(#9584,#9591),.PCURVE_S1.); +#9580 = LINE('',#9581,#9582); +#9581 = CARTESIAN_POINT('',(2.55,0.205,0.3)); +#9582 = VECTOR('',#9583,1.); +#9583 = DIRECTION('',(0.,0.,1.)); +#9584 = PCURVE('',#4947,#9585); +#9585 = DEFINITIONAL_REPRESENTATION('',(#9586),#9590); +#9586 = LINE('',#9587,#9588); +#9587 = CARTESIAN_POINT('',(-0.232659657565,-0.13421032799)); +#9588 = VECTOR('',#9589,1.); +#9589 = DIRECTION('',(1.,0.)); +#9590 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9591 = PCURVE('',#9592,#9597); +#9592 = PLANE('',#9593); +#9593 = AXIS2_PLACEMENT_3D('',#9594,#9595,#9596); +#9594 = CARTESIAN_POINT('',(2.55,0.205,0.3)); +#9595 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#9596 = DIRECTION('',(0.,0.,1.)); +#9597 = DEFINITIONAL_REPRESENTATION('',(#9598),#9602); +#9598 = LINE('',#9599,#9600); +#9599 = CARTESIAN_POINT('',(0.,0.)); +#9600 = VECTOR('',#9601,1.); +#9601 = DIRECTION('',(1.,0.)); +#9602 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9603 = ORIENTED_EDGE('',*,*,#9604,.T.); +#9604 = EDGE_CURVE('',#9577,#9605,#9607,.T.); +#9605 = VERTEX_POINT('',#9606); +#9606 = CARTESIAN_POINT('',(2.25,0.205,1.025)); +#9607 = SURFACE_CURVE('',#9608,(#9613,#9620),.PCURVE_S1.); +#9608 = CIRCLE('',#9609,0.3); +#9609 = AXIS2_PLACEMENT_3D('',#9610,#9611,#9612); +#9610 = CARTESIAN_POINT('',(2.25,0.205,0.725)); +#9611 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#9612 = DIRECTION('',(1.,2.22044604925E-16,3.700743415417E-16)); +#9613 = PCURVE('',#4947,#9614); +#9614 = DEFINITIONAL_REPRESENTATION('',(#9615),#9619); +#9615 = CIRCLE('',#9616,0.3); +#9616 = AXIS2_PLACEMENT_2D('',#9617,#9618); +#9617 = CARTESIAN_POINT('',(0.192340342435,0.16578967201)); +#9618 = DIRECTION('',(3.700743415417E-16,-1.)); +#9619 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9620 = PCURVE('',#9621,#9626); +#9621 = CYLINDRICAL_SURFACE('',#9622,0.3); +#9622 = AXIS2_PLACEMENT_3D('',#9623,#9624,#9625); +#9623 = CARTESIAN_POINT('',(2.25,0.205,0.725)); +#9624 = DIRECTION('',(-2.22044604925E-16,1.,-0.)); +#9625 = DIRECTION('',(1.,2.22044604925E-16,3.700743415417E-16)); +#9626 = DEFINITIONAL_REPRESENTATION('',(#9627),#9631); +#9627 = LINE('',#9628,#9629); +#9628 = CARTESIAN_POINT('',(6.28318530718,0.)); +#9629 = VECTOR('',#9630,1.); +#9630 = DIRECTION('',(-1.,0.)); +#9631 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9632 = ORIENTED_EDGE('',*,*,#9633,.T.); +#9633 = EDGE_CURVE('',#9605,#4932,#9634,.T.); +#9634 = SURFACE_CURVE('',#9635,(#9639,#9646),.PCURVE_S1.); +#9635 = LINE('',#9636,#9637); +#9636 = CARTESIAN_POINT('',(2.25,0.205,1.025)); +#9637 = VECTOR('',#9638,1.); +#9638 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#9639 = PCURVE('',#4947,#9640); +#9640 = DEFINITIONAL_REPRESENTATION('',(#9641),#9645); +#9641 = LINE('',#9642,#9643); +#9642 = CARTESIAN_POINT('',(0.492340342435,0.16578967201)); +#9643 = VECTOR('',#9644,1.); +#9644 = DIRECTION('',(0.,1.)); +#9645 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9646 = PCURVE('',#5388,#9647); +#9647 = DEFINITIONAL_REPRESENTATION('',(#9648),#9652); +#9648 = LINE('',#9649,#9650); +#9649 = CARTESIAN_POINT('',(-0.,0.)); +#9650 = VECTOR('',#9651,1.); +#9651 = DIRECTION('',(1.,0.)); +#9652 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9653 = ADVANCED_FACE('',(#9654),#5004,.T.); +#9654 = FACE_BOUND('',#9655,.T.); +#9655 = EDGE_LOOP('',(#9656,#9657,#9658,#9686,#9709,#9733,#9756,#9779, + #9802,#9830,#9853,#9877)); +#9656 = ORIENTED_EDGE('',*,*,#4988,.F.); +#9657 = ORIENTED_EDGE('',*,*,#5093,.T.); +#9658 = ORIENTED_EDGE('',*,*,#9659,.T.); +#9659 = EDGE_CURVE('',#5094,#9660,#9662,.T.); +#9660 = VERTEX_POINT('',#9661); +#9661 = CARTESIAN_POINT('',(2.35,-0.205,0.725)); +#9662 = SURFACE_CURVE('',#9663,(#9668,#9679),.PCURVE_S1.); +#9663 = CIRCLE('',#9664,0.1); +#9664 = AXIS2_PLACEMENT_3D('',#9665,#9666,#9667); +#9665 = CARTESIAN_POINT('',(2.25,-0.205,0.725)); +#9666 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#9667 = DIRECTION('',(4.440892098501E-15,9.860761315262E-31,1.)); +#9668 = PCURVE('',#5004,#9669); +#9669 = DEFINITIONAL_REPRESENTATION('',(#9670),#9678); +#9670 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#9671,#9672,#9673,#9674, +#9675,#9676,#9677),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#9671 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#9672 = CARTESIAN_POINT('',(0.292340342435,-7.415408746888E-03)); +#9673 = CARTESIAN_POINT('',(0.142340342435,7.918713163156E-02)); +#9674 = CARTESIAN_POINT('',(-7.659657565E-03,0.16578967201)); +#9675 = CARTESIAN_POINT('',(0.142340342435,0.252392212388)); +#9676 = CARTESIAN_POINT('',(0.292340342435,0.338994752767)); +#9677 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#9678 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9679 = PCURVE('',#5130,#9680); +#9680 = DEFINITIONAL_REPRESENTATION('',(#9681),#9685); +#9681 = LINE('',#9682,#9683); +#9682 = CARTESIAN_POINT('',(0.,-0.41)); +#9683 = VECTOR('',#9684,1.); +#9684 = DIRECTION('',(1.,0.)); +#9685 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9686 = ORIENTED_EDGE('',*,*,#9687,.T.); +#9687 = EDGE_CURVE('',#9660,#9688,#9690,.T.); +#9688 = VERTEX_POINT('',#9689); +#9689 = CARTESIAN_POINT('',(2.35,-0.205,0.3)); +#9690 = SURFACE_CURVE('',#9691,(#9695,#9702),.PCURVE_S1.); +#9691 = LINE('',#9692,#9693); +#9692 = CARTESIAN_POINT('',(2.35,-0.205,0.725)); +#9693 = VECTOR('',#9694,1.); +#9694 = DIRECTION('',(1.044915787883E-15,2.320179133003E-31,-1.)); +#9695 = PCURVE('',#5004,#9696); +#9696 = DEFINITIONAL_REPRESENTATION('',(#9697),#9701); +#9697 = LINE('',#9698,#9699); +#9698 = CARTESIAN_POINT('',(0.192340342435,6.578967201E-02)); +#9699 = VECTOR('',#9700,1.); +#9700 = DIRECTION('',(-1.,-1.044915787883E-15)); +#9701 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9702 = PCURVE('',#9418,#9703); +#9703 = DEFINITIONAL_REPRESENTATION('',(#9704),#9708); +#9704 = LINE('',#9705,#9706); +#9705 = CARTESIAN_POINT('',(-9.512734445312E-32,-0.41)); +#9706 = VECTOR('',#9707,1.); +#9707 = DIRECTION('',(1.,0.)); +#9708 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9709 = ORIENTED_EDGE('',*,*,#9710,.T.); +#9710 = EDGE_CURVE('',#9688,#9711,#9713,.T.); +#9711 = VERTEX_POINT('',#9712); +#9712 = CARTESIAN_POINT('',(2.65,-0.205,5.551115123126E-17)); +#9713 = SURFACE_CURVE('',#9714,(#9719,#9726),.PCURVE_S1.); +#9714 = CIRCLE('',#9715,0.3); +#9715 = AXIS2_PLACEMENT_3D('',#9716,#9717,#9718); +#9716 = CARTESIAN_POINT('',(2.65,-0.205,0.3)); +#9717 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#9718 = DIRECTION('',(-1.,-2.22044604925E-16,3.515706244646E-15)); +#9719 = PCURVE('',#5004,#9720); +#9720 = DEFINITIONAL_REPRESENTATION('',(#9721),#9725); +#9721 = CIRCLE('',#9722,0.3); +#9722 = AXIS2_PLACEMENT_2D('',#9723,#9724); +#9723 = CARTESIAN_POINT('',(-0.232659657565,-0.23421032799)); +#9724 = DIRECTION('',(3.515706244646E-15,1.)); +#9725 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9726 = PCURVE('',#9447,#9727); +#9727 = DEFINITIONAL_REPRESENTATION('',(#9728),#9732); +#9728 = LINE('',#9729,#9730); +#9729 = CARTESIAN_POINT('',(6.28318530718,-0.41)); +#9730 = VECTOR('',#9731,1.); +#9731 = DIRECTION('',(-1.,0.)); +#9732 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9733 = ORIENTED_EDGE('',*,*,#9734,.T.); +#9734 = EDGE_CURVE('',#9711,#9735,#9737,.T.); +#9735 = VERTEX_POINT('',#9736); +#9736 = CARTESIAN_POINT('',(3.,-0.205,5.551115123126E-17)); +#9737 = SURFACE_CURVE('',#9738,(#9742,#9749),.PCURVE_S1.); +#9738 = LINE('',#9739,#9740); +#9739 = CARTESIAN_POINT('',(2.65,-0.205,5.551115123126E-17)); +#9740 = VECTOR('',#9741,1.); +#9741 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#9742 = PCURVE('',#5004,#9743); +#9743 = DEFINITIONAL_REPRESENTATION('',(#9744),#9748); +#9744 = LINE('',#9745,#9746); +#9745 = CARTESIAN_POINT('',(-0.532659657565,-0.23421032799)); +#9746 = VECTOR('',#9747,1.); +#9747 = DIRECTION('',(0.,-1.)); +#9748 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9749 = PCURVE('',#9475,#9750); +#9750 = DEFINITIONAL_REPRESENTATION('',(#9751),#9755); +#9751 = LINE('',#9752,#9753); +#9752 = CARTESIAN_POINT('',(-9.103828801925E-17,-0.41)); +#9753 = VECTOR('',#9754,1.); +#9754 = DIRECTION('',(1.,0.)); +#9755 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9756 = ORIENTED_EDGE('',*,*,#9757,.T.); +#9757 = EDGE_CURVE('',#9735,#9758,#9760,.T.); +#9758 = VERTEX_POINT('',#9759); +#9759 = CARTESIAN_POINT('',(3.,-0.205,0.2)); +#9760 = SURFACE_CURVE('',#9761,(#9765,#9772),.PCURVE_S1.); +#9761 = LINE('',#9762,#9763); +#9762 = CARTESIAN_POINT('',(3.,-0.205,5.551115123126E-17)); +#9763 = VECTOR('',#9764,1.); +#9764 = DIRECTION('',(0.,0.,1.)); +#9765 = PCURVE('',#5004,#9766); +#9766 = DEFINITIONAL_REPRESENTATION('',(#9767),#9771); +#9767 = LINE('',#9768,#9769); +#9768 = CARTESIAN_POINT('',(-0.532659657565,-0.58421032799)); +#9769 = VECTOR('',#9770,1.); +#9770 = DIRECTION('',(1.,0.)); +#9771 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9772 = PCURVE('',#9503,#9773); +#9773 = DEFINITIONAL_REPRESENTATION('',(#9774),#9778); +#9774 = LINE('',#9775,#9776); +#9775 = CARTESIAN_POINT('',(0.,-0.41)); +#9776 = VECTOR('',#9777,1.); +#9777 = DIRECTION('',(1.,0.)); +#9778 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9779 = ORIENTED_EDGE('',*,*,#9780,.T.); +#9780 = EDGE_CURVE('',#9758,#9781,#9783,.T.); +#9781 = VERTEX_POINT('',#9782); +#9782 = CARTESIAN_POINT('',(2.65,-0.205,0.2)); +#9783 = SURFACE_CURVE('',#9784,(#9788,#9795),.PCURVE_S1.); +#9784 = LINE('',#9785,#9786); +#9785 = CARTESIAN_POINT('',(3.,-0.205,0.2)); +#9786 = VECTOR('',#9787,1.); +#9787 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#9788 = PCURVE('',#5004,#9789); +#9789 = DEFINITIONAL_REPRESENTATION('',(#9790),#9794); +#9790 = LINE('',#9791,#9792); +#9791 = CARTESIAN_POINT('',(-0.332659657565,-0.58421032799)); +#9792 = VECTOR('',#9793,1.); +#9793 = DIRECTION('',(0.,1.)); +#9794 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9795 = PCURVE('',#9531,#9796); +#9796 = DEFINITIONAL_REPRESENTATION('',(#9797),#9801); +#9797 = LINE('',#9798,#9799); +#9798 = CARTESIAN_POINT('',(9.103828801925E-17,-0.41)); +#9799 = VECTOR('',#9800,1.); +#9800 = DIRECTION('',(1.,0.)); +#9801 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9802 = ORIENTED_EDGE('',*,*,#9803,.T.); +#9803 = EDGE_CURVE('',#9781,#9804,#9806,.T.); +#9804 = VERTEX_POINT('',#9805); +#9805 = CARTESIAN_POINT('',(2.55,-0.205,0.3)); +#9806 = SURFACE_CURVE('',#9807,(#9812,#9823),.PCURVE_S1.); +#9807 = CIRCLE('',#9808,0.1); +#9808 = AXIS2_PLACEMENT_3D('',#9809,#9810,#9811); +#9809 = CARTESIAN_POINT('',(2.65,-0.205,0.3)); +#9810 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#9811 = DIRECTION('',(0.,0.,-1.)); +#9812 = PCURVE('',#5004,#9813); +#9813 = DEFINITIONAL_REPRESENTATION('',(#9814),#9822); +#9814 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#9815,#9816,#9817,#9818, +#9819,#9820,#9821),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2 + ,2,2,2,1),(-2.094395102393,0.,2.094395102393,4.188790204786, +6.28318530718,8.377580409573),.UNSPECIFIED.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5, +1.,0.5,1.)) REPRESENTATION_ITEM('') ); +#9815 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#9816 = CARTESIAN_POINT('',(-0.332659657565,-6.100524723311E-02)); +#9817 = CARTESIAN_POINT('',(-0.182659657565,-0.147607787612)); +#9818 = CARTESIAN_POINT('',(-3.2659657565E-02,-0.23421032799)); +#9819 = CARTESIAN_POINT('',(-0.182659657565,-0.320812868368)); +#9820 = CARTESIAN_POINT('',(-0.332659657565,-0.407415408747)); +#9821 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#9822 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9823 = PCURVE('',#9564,#9824); +#9824 = DEFINITIONAL_REPRESENTATION('',(#9825),#9829); +#9825 = LINE('',#9826,#9827); +#9826 = CARTESIAN_POINT('',(0.,-0.41)); +#9827 = VECTOR('',#9828,1.); +#9828 = DIRECTION('',(1.,0.)); +#9829 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9830 = ORIENTED_EDGE('',*,*,#9831,.T.); +#9831 = EDGE_CURVE('',#9804,#9832,#9834,.T.); +#9832 = VERTEX_POINT('',#9833); +#9833 = CARTESIAN_POINT('',(2.55,-0.205,0.725)); +#9834 = SURFACE_CURVE('',#9835,(#9839,#9846),.PCURVE_S1.); +#9835 = LINE('',#9836,#9837); +#9836 = CARTESIAN_POINT('',(2.55,-0.205,0.3)); +#9837 = VECTOR('',#9838,1.); +#9838 = DIRECTION('',(0.,0.,1.)); +#9839 = PCURVE('',#5004,#9840); +#9840 = DEFINITIONAL_REPRESENTATION('',(#9841),#9845); +#9841 = LINE('',#9842,#9843); +#9842 = CARTESIAN_POINT('',(-0.232659657565,-0.13421032799)); +#9843 = VECTOR('',#9844,1.); +#9844 = DIRECTION('',(1.,0.)); +#9845 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9846 = PCURVE('',#9592,#9847); +#9847 = DEFINITIONAL_REPRESENTATION('',(#9848),#9852); +#9848 = LINE('',#9849,#9850); +#9849 = CARTESIAN_POINT('',(0.,-0.41)); +#9850 = VECTOR('',#9851,1.); +#9851 = DIRECTION('',(1.,0.)); +#9852 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9853 = ORIENTED_EDGE('',*,*,#9854,.T.); +#9854 = EDGE_CURVE('',#9832,#9855,#9857,.T.); +#9855 = VERTEX_POINT('',#9856); +#9856 = CARTESIAN_POINT('',(2.25,-0.205,1.025)); +#9857 = SURFACE_CURVE('',#9858,(#9863,#9870),.PCURVE_S1.); +#9858 = CIRCLE('',#9859,0.3); +#9859 = AXIS2_PLACEMENT_3D('',#9860,#9861,#9862); +#9860 = CARTESIAN_POINT('',(2.25,-0.205,0.725)); +#9861 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#9862 = DIRECTION('',(1.,2.22044604925E-16,3.700743415417E-16)); +#9863 = PCURVE('',#5004,#9864); +#9864 = DEFINITIONAL_REPRESENTATION('',(#9865),#9869); +#9865 = CIRCLE('',#9866,0.3); +#9866 = AXIS2_PLACEMENT_2D('',#9867,#9868); +#9867 = CARTESIAN_POINT('',(0.192340342435,0.16578967201)); +#9868 = DIRECTION('',(3.700743415417E-16,-1.)); +#9869 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9870 = PCURVE('',#9621,#9871); +#9871 = DEFINITIONAL_REPRESENTATION('',(#9872),#9876); +#9872 = LINE('',#9873,#9874); +#9873 = CARTESIAN_POINT('',(6.28318530718,-0.41)); +#9874 = VECTOR('',#9875,1.); +#9875 = DIRECTION('',(-1.,0.)); +#9876 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9877 = ORIENTED_EDGE('',*,*,#9878,.T.); +#9878 = EDGE_CURVE('',#9855,#4989,#9879,.T.); +#9879 = SURFACE_CURVE('',#9880,(#9884,#9891),.PCURVE_S1.); +#9880 = LINE('',#9881,#9882); +#9881 = CARTESIAN_POINT('',(2.25,-0.205,1.025)); +#9882 = VECTOR('',#9883,1.); +#9883 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#9884 = PCURVE('',#5004,#9885); +#9885 = DEFINITIONAL_REPRESENTATION('',(#9886),#9890); +#9886 = LINE('',#9887,#9888); +#9887 = CARTESIAN_POINT('',(0.492340342435,0.16578967201)); +#9888 = VECTOR('',#9889,1.); +#9889 = DIRECTION('',(0.,1.)); +#9890 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9891 = PCURVE('',#5388,#9892); +#9892 = DEFINITIONAL_REPRESENTATION('',(#9893),#9897); +#9893 = LINE('',#9894,#9895); +#9894 = CARTESIAN_POINT('',(9.103828801925E-17,-0.41)); +#9895 = VECTOR('',#9896,1.); +#9896 = DIRECTION('',(1.,0.)); +#9897 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9898 = ADVANCED_FACE('',(#9899),#5054,.F.); +#9899 = FACE_BOUND('',#9900,.F.); +#9900 = EDGE_LOOP('',(#9901,#9921,#9922,#9942)); +#9901 = ORIENTED_EDGE('',*,*,#9902,.F.); +#9902 = EDGE_CURVE('',#4989,#5373,#9903,.T.); +#9903 = SURFACE_CURVE('',#9904,(#9908,#9914),.PCURVE_S1.); +#9904 = LINE('',#9905,#9906); +#9905 = CARTESIAN_POINT('',(2.25,-0.205,1.025)); +#9906 = VECTOR('',#9907,1.); +#9907 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#9908 = PCURVE('',#5054,#9909); +#9909 = DEFINITIONAL_REPRESENTATION('',(#9910),#9913); +#9910 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9911,#9912),.UNSPECIFIED.,.F., + .F.,(2,2),(0.3,0.375),.PIECEWISE_BEZIER_KNOTS.); +#9911 = CARTESIAN_POINT('',(4.38,2.079019460221E-15)); +#9912 = CARTESIAN_POINT('',(4.381858006042,1.)); +#9913 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9914 = PCURVE('',#5388,#9915); +#9915 = DEFINITIONAL_REPRESENTATION('',(#9916),#9920); +#9916 = LINE('',#9917,#9918); +#9917 = CARTESIAN_POINT('',(9.103828801925E-17,-0.41)); +#9918 = VECTOR('',#9919,1.); +#9919 = DIRECTION('',(1.,0.)); +#9920 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9921 = ORIENTED_EDGE('',*,*,#5040,.T.); +#9922 = ORIENTED_EDGE('',*,*,#9923,.T.); +#9923 = EDGE_CURVE('',#5018,#5401,#9924,.T.); +#9924 = SURFACE_CURVE('',#9925,(#9929,#9935),.PCURVE_S1.); +#9925 = LINE('',#9926,#9927); +#9926 = CARTESIAN_POINT('',(2.25,-1.065,1.025)); +#9927 = VECTOR('',#9928,1.); +#9928 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#9929 = PCURVE('',#5054,#9930); +#9930 = DEFINITIONAL_REPRESENTATION('',(#9931),#9934); +#9931 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9932,#9933),.UNSPECIFIED.,.F., + .F.,(2,2),(0.3,0.375),.PIECEWISE_BEZIER_KNOTS.); +#9932 = CARTESIAN_POINT('',(5.24,1.882142905503E-15)); +#9933 = CARTESIAN_POINT('',(5.249652567976,1.)); +#9934 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9935 = PCURVE('',#5438,#9936); +#9936 = DEFINITIONAL_REPRESENTATION('',(#9937),#9941); +#9937 = LINE('',#9938,#9939); +#9938 = CARTESIAN_POINT('',(-0.,0.)); +#9939 = VECTOR('',#9940,1.); +#9940 = DIRECTION('',(1.,0.)); +#9941 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9942 = ORIENTED_EDGE('',*,*,#5400,.F.); +#9943 = ADVANCED_FACE('',(#9944),#5130,.F.); +#9944 = FACE_BOUND('',#9945,.F.); +#9945 = EDGE_LOOP('',(#9946,#9947,#9948,#9969)); +#9946 = ORIENTED_EDGE('',*,*,#5116,.T.); +#9947 = ORIENTED_EDGE('',*,*,#9659,.T.); +#9948 = ORIENTED_EDGE('',*,*,#9949,.F.); +#9949 = EDGE_CURVE('',#9375,#9660,#9950,.T.); +#9950 = SURFACE_CURVE('',#9951,(#9955,#9962),.PCURVE_S1.); +#9951 = LINE('',#9952,#9953); +#9952 = CARTESIAN_POINT('',(2.35,0.205,0.725)); +#9953 = VECTOR('',#9954,1.); +#9954 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#9955 = PCURVE('',#5130,#9956); +#9956 = DEFINITIONAL_REPRESENTATION('',(#9957),#9961); +#9957 = LINE('',#9958,#9959); +#9958 = CARTESIAN_POINT('',(1.570796326795,-2.775557561563E-17)); +#9959 = VECTOR('',#9960,1.); +#9960 = DIRECTION('',(0.,-1.)); +#9961 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9962 = PCURVE('',#9418,#9963); +#9963 = DEFINITIONAL_REPRESENTATION('',(#9964),#9968); +#9964 = LINE('',#9965,#9966); +#9965 = CARTESIAN_POINT('',(0.,0.)); +#9966 = VECTOR('',#9967,1.); +#9967 = DIRECTION('',(7.584527938158E-44,-1.)); +#9968 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9969 = ORIENTED_EDGE('',*,*,#9374,.F.); +#9970 = ADVANCED_FACE('',(#9971),#5163,.F.); +#9971 = FACE_BOUND('',#9972,.F.); +#9972 = EDGE_LOOP('',(#9973,#9974,#9975,#9997)); +#9973 = ORIENTED_EDGE('',*,*,#5147,.T.); +#9974 = ORIENTED_EDGE('',*,*,#5201,.T.); +#9975 = ORIENTED_EDGE('',*,*,#9976,.F.); +#9976 = EDGE_CURVE('',#9977,#5202,#9979,.T.); +#9977 = VERTEX_POINT('',#9978); +#9978 = CARTESIAN_POINT('',(1.7375,4.275,1.025)); +#9979 = SURFACE_CURVE('',#9980,(#9984,#9990),.PCURVE_S1.); +#9980 = LINE('',#9981,#9982); +#9981 = CARTESIAN_POINT('',(1.7375,4.275,1.025)); +#9982 = VECTOR('',#9983,1.); +#9983 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#9984 = PCURVE('',#5163,#9985); +#9985 = DEFINITIONAL_REPRESENTATION('',(#9986),#9989); +#9986 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#9987,#9988),.UNSPECIFIED.,.F., + .F.,(2,2),(0.,0.194454364826),.PIECEWISE_BEZIER_KNOTS.); +#9987 = CARTESIAN_POINT('',(7.231438502557E-16,1.)); +#9988 = CARTESIAN_POINT('',(0.247487373415,1.)); +#9989 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9990 = PCURVE('',#5639,#9991); +#9991 = DEFINITIONAL_REPRESENTATION('',(#9992),#9996); +#9992 = LINE('',#9993,#9994); +#9993 = CARTESIAN_POINT('',(4.898011958237E-16,2.52510979907E-16)); +#9994 = VECTOR('',#9995,1.); +#9995 = DIRECTION('',(1.,-1.819740506426E-16)); +#9996 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#9997 = ORIENTED_EDGE('',*,*,#9998,.F.); +#9998 = EDGE_CURVE('',#5148,#9977,#9999,.T.); +#9999 = SURFACE_CURVE('',#10000,(#10003,#10010),.PCURVE_S1.); +#10000 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#10001,#10002),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#10001 = CARTESIAN_POINT('',(1.775,4.35,1.025)); +#10002 = CARTESIAN_POINT('',(1.7375,4.275,1.025)); +#10003 = PCURVE('',#5163,#10004); +#10004 = DEFINITIONAL_REPRESENTATION('',(#10005),#10009); +#10005 = LINE('',#10006,#10007); +#10006 = CARTESIAN_POINT('',(-1.424868498589E-16,-5.311956991949E-15)); +#10007 = VECTOR('',#10008,1.); +#10008 = DIRECTION('',(3.327508353498E-16,1.)); +#10009 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10010 = PCURVE('',#10011,#10016); +#10011 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#10012,#10013) + ,(#10014,#10015 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.55),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#10012 = CARTESIAN_POINT('',(-1.775,4.35,1.025)); +#10013 = CARTESIAN_POINT('',(-1.7375,4.275,1.025)); +#10014 = CARTESIAN_POINT('',(1.775,4.35,1.025)); +#10015 = CARTESIAN_POINT('',(1.7375,4.275,1.025)); +#10016 = DEFINITIONAL_REPRESENTATION('',(#10017),#10021); +#10017 = LINE('',#10018,#10019); +#10018 = CARTESIAN_POINT('',(3.55,1.043148938398E-15)); +#10019 = VECTOR('',#10020,1.); +#10020 = DIRECTION('',(0.,1.)); +#10021 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10022 = ADVANCED_FACE('',(#10023),#5187,.F.); +#10023 = FACE_BOUND('',#10024,.F.); +#10024 = EDGE_LOOP('',(#10025,#10026,#10027,#10050)); +#10025 = ORIENTED_EDGE('',*,*,#5967,.T.); +#10026 = ORIENTED_EDGE('',*,*,#5175,.T.); +#10027 = ORIENTED_EDGE('',*,*,#10028,.F.); +#10028 = EDGE_CURVE('',#10029,#5148,#10031,.T.); +#10029 = VERTEX_POINT('',#10030); +#10030 = CARTESIAN_POINT('',(-1.775,4.35,1.025)); +#10031 = SURFACE_CURVE('',#10032,(#10036,#10043),.PCURVE_S1.); +#10032 = LINE('',#10033,#10034); +#10033 = CARTESIAN_POINT('',(-1.775,4.35,1.025)); +#10034 = VECTOR('',#10035,1.); +#10035 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#10036 = PCURVE('',#5187,#10037); +#10037 = DEFINITIONAL_REPRESENTATION('',(#10038),#10042); +#10038 = LINE('',#10039,#10040); +#10039 = CARTESIAN_POINT('',(0.,0.)); +#10040 = VECTOR('',#10041,1.); +#10041 = DIRECTION('',(1.,0.)); +#10042 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10043 = PCURVE('',#10011,#10044); +#10044 = DEFINITIONAL_REPRESENTATION('',(#10045),#10049); +#10045 = LINE('',#10046,#10047); +#10046 = CARTESIAN_POINT('',(3.564514819754E-17,1.042859870759E-15)); +#10047 = VECTOR('',#10048,1.); +#10048 = DIRECTION('',(1.,-3.335799961041E-15)); +#10049 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10050 = ORIENTED_EDGE('',*,*,#10051,.F.); +#10051 = EDGE_CURVE('',#5968,#10029,#10052,.T.); +#10052 = SURFACE_CURVE('',#10053,(#10056,#10062),.PCURVE_S1.); +#10053 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#10054,#10055),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#10054 = CARTESIAN_POINT('',(-1.775,4.35,0.825)); +#10055 = CARTESIAN_POINT('',(-1.775,4.35,1.025)); +#10056 = PCURVE('',#5187,#10057); +#10057 = DEFINITIONAL_REPRESENTATION('',(#10058),#10061); +#10058 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#10059,#10060),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#10059 = CARTESIAN_POINT('',(0.,-0.2)); +#10060 = CARTESIAN_POINT('',(0.,0.)); +#10061 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10062 = PCURVE('',#6580,#10063); +#10063 = DEFINITIONAL_REPRESENTATION('',(#10064),#10067); +#10064 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#10065,#10066),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#10065 = CARTESIAN_POINT('',(0.247487373415,-0.2)); +#10066 = CARTESIAN_POINT('',(0.247487373415,0.)); +#10067 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10068 = ADVANCED_FACE('',(#10069),#5639,.F.); +#10069 = FACE_BOUND('',#10070,.F.); +#10070 = EDGE_LOOP('',(#10071,#10072,#10073,#10095)); +#10071 = ORIENTED_EDGE('',*,*,#9976,.T.); +#10072 = ORIENTED_EDGE('',*,*,#5626,.T.); +#10073 = ORIENTED_EDGE('',*,*,#10074,.F.); +#10074 = EDGE_CURVE('',#10075,#5600,#10077,.T.); +#10075 = VERTEX_POINT('',#10076); +#10076 = CARTESIAN_POINT('',(1.680085640382,4.160171280765,1.75)); +#10077 = SURFACE_CURVE('',#10078,(#10082,#10088),.PCURVE_S1.); +#10078 = LINE('',#10079,#10080); +#10079 = CARTESIAN_POINT('',(1.680085640382,4.160171280765,1.75)); +#10080 = VECTOR('',#10081,1.); +#10081 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#10082 = PCURVE('',#5639,#10083); +#10083 = DEFINITIONAL_REPRESENTATION('',(#10084),#10087); +#10084 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#10085,#10086),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,0.113258198781),.PIECEWISE_BEZIER_KNOTS.); +#10085 = CARTESIAN_POINT('',(6.820209157072E-16,1.)); +#10086 = CARTESIAN_POINT('',(0.194454364826,1.)); +#10087 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10088 = PCURVE('',#5614,#10089); +#10089 = DEFINITIONAL_REPRESENTATION('',(#10090),#10094); +#10090 = LINE('',#10091,#10092); +#10091 = CARTESIAN_POINT('',(1.258270589805,3.115687108633)); +#10092 = VECTOR('',#10093,1.); +#10093 = DIRECTION('',(0.920445682901,0.390870496236)); +#10094 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10095 = ORIENTED_EDGE('',*,*,#10096,.F.); +#10096 = EDGE_CURVE('',#9977,#10075,#10097,.T.); +#10097 = SURFACE_CURVE('',#10098,(#10101,#10108),.PCURVE_S1.); +#10098 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#10099,#10100),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#10099 = CARTESIAN_POINT('',(1.7375,4.275,1.025)); +#10100 = CARTESIAN_POINT('',(1.680085640382,4.160171280765,1.75)); +#10101 = PCURVE('',#5639,#10102); +#10102 = DEFINITIONAL_REPRESENTATION('',(#10103),#10107); +#10103 = LINE('',#10104,#10105); +#10104 = CARTESIAN_POINT('',(4.898011958237E-16,2.52510979907E-16)); +#10105 = VECTOR('',#10106,1.); +#10106 = DIRECTION('',(-3.518549751175E-16,1.)); +#10107 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10108 = PCURVE('',#10109,#10114); +#10109 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#10110,#10111) + ,(#10112,#10113 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.475),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#10110 = CARTESIAN_POINT('',(-1.7375,4.275,1.025)); +#10111 = CARTESIAN_POINT('',(-1.680085640382,4.160171280765,1.75)); +#10112 = CARTESIAN_POINT('',(1.7375,4.275,1.025)); +#10113 = CARTESIAN_POINT('',(1.680085640382,4.160171280765,1.75)); +#10114 = DEFINITIONAL_REPRESENTATION('',(#10115),#10119); +#10115 = LINE('',#10116,#10117); +#10116 = CARTESIAN_POINT('',(3.475,1.879756940525E-17)); +#10117 = VECTOR('',#10118,1.); +#10118 = DIRECTION('',(0.,1.)); +#10119 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10120 = ADVANCED_FACE('',(#10121,#10275),#5614,.T.); +#10121 = FACE_BOUND('',#10122,.T.); +#10122 = EDGE_LOOP('',(#10123,#10145,#10172,#10199,#10226,#10253,#10273, + #10274)); +#10123 = ORIENTED_EDGE('',*,*,#10124,.F.); +#10124 = EDGE_CURVE('',#10125,#10075,#10127,.T.); +#10125 = VERTEX_POINT('',#10126); +#10126 = CARTESIAN_POINT('',(-1.680085640382,4.160171280765,1.75)); +#10127 = SURFACE_CURVE('',#10128,(#10132,#10139),.PCURVE_S1.); +#10128 = LINE('',#10129,#10130); +#10129 = CARTESIAN_POINT('',(-1.680085640382,4.160171280765,1.75)); +#10130 = VECTOR('',#10131,1.); +#10131 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#10132 = PCURVE('',#5614,#10133); +#10133 = DEFINITIONAL_REPRESENTATION('',(#10134),#10138); +#10134 = LINE('',#10135,#10136); +#10135 = CARTESIAN_POINT('',(0.,0.)); +#10136 = VECTOR('',#10137,1.); +#10137 = DIRECTION('',(0.374466205639,0.927240562548)); +#10138 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10139 = PCURVE('',#10109,#10140); +#10140 = DEFINITIONAL_REPRESENTATION('',(#10141),#10144); +#10141 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#10142,#10143),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,3.360171280764),.PIECEWISE_BEZIER_KNOTS.); +#10142 = CARTESIAN_POINT('',(2.75143737505E-16,1.)); +#10143 = CARTESIAN_POINT('',(3.475,1.)); +#10144 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10145 = ORIENTED_EDGE('',*,*,#10146,.F.); +#10146 = EDGE_CURVE('',#10147,#10125,#10149,.T.); +#10147 = VERTEX_POINT('',#10148); +#10148 = CARTESIAN_POINT('',(-1.760171280765,4.080085640382,1.75)); +#10149 = SURFACE_CURVE('',#10150,(#10154,#10161),.PCURVE_S1.); +#10150 = LINE('',#10151,#10152); +#10151 = CARTESIAN_POINT('',(-1.760171280765,4.080085640382,1.75)); +#10152 = VECTOR('',#10153,1.); +#10153 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#10154 = PCURVE('',#5614,#10155); +#10155 = DEFINITIONAL_REPRESENTATION('',(#10156),#10160); +#10156 = LINE('',#10157,#10158); +#10157 = CARTESIAN_POINT('',(4.426928836036E-02,-0.104248020121)); +#10158 = VECTOR('',#10159,1.); +#10159 = DIRECTION('',(-0.390870496236,0.920445682901)); +#10160 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10161 = PCURVE('',#10162,#10167); +#10162 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#10163,#10164) + ,(#10165,#10166 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#10163 = CARTESIAN_POINT('',(-1.875,4.1375,1.025)); +#10164 = CARTESIAN_POINT('',(-1.760171280765,4.080085640382,1.75)); +#10165 = CARTESIAN_POINT('',(-1.7375,4.275,1.025)); +#10166 = CARTESIAN_POINT('',(-1.680085640382,4.160171280765,1.75)); +#10167 = DEFINITIONAL_REPRESENTATION('',(#10168),#10171); +#10168 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#10169,#10170),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,0.113258198781),.PIECEWISE_BEZIER_KNOTS.); +#10169 = CARTESIAN_POINT('',(-3.937933821297E-16,1.)); +#10170 = CARTESIAN_POINT('',(0.194454364826,1.)); +#10171 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10172 = ORIENTED_EDGE('',*,*,#10173,.F.); +#10173 = EDGE_CURVE('',#10174,#10147,#10176,.T.); +#10174 = VERTEX_POINT('',#10175); +#10175 = CARTESIAN_POINT('',(-1.760171280765,-4.080085640382,1.75)); +#10176 = SURFACE_CURVE('',#10177,(#10181,#10188),.PCURVE_S1.); +#10177 = LINE('',#10178,#10179); +#10178 = CARTESIAN_POINT('',(-1.760171280765,-4.080085640382,1.75)); +#10179 = VECTOR('',#10180,1.); +#10180 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#10181 = PCURVE('',#5614,#10182); +#10182 = DEFINITIONAL_REPRESENTATION('',(#10183),#10187); +#10183 = LINE('',#10184,#10185); +#10184 = CARTESIAN_POINT('',(7.610711097224,-3.159956396993)); +#10185 = VECTOR('',#10186,1.); +#10186 = DIRECTION('',(-0.927240562548,0.374466205639)); +#10187 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10188 = PCURVE('',#10189,#10194); +#10189 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#10190,#10191) + ,(#10192,#10193 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,8.275),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#10190 = CARTESIAN_POINT('',(-1.875,-4.1375,1.025)); +#10191 = CARTESIAN_POINT('',(-1.760171280765,-4.080085640382,1.75)); +#10192 = CARTESIAN_POINT('',(-1.875,4.1375,1.025)); +#10193 = CARTESIAN_POINT('',(-1.760171280765,4.080085640382,1.75)); +#10194 = DEFINITIONAL_REPRESENTATION('',(#10195),#10198); +#10195 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#10196,#10197),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,8.160171280764),.PIECEWISE_BEZIER_KNOTS.); +#10196 = CARTESIAN_POINT('',(-6.598996897297E-16,1.)); +#10197 = CARTESIAN_POINT('',(8.275,1.)); +#10198 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10199 = ORIENTED_EDGE('',*,*,#10200,.F.); +#10200 = EDGE_CURVE('',#10201,#10174,#10203,.T.); +#10201 = VERTEX_POINT('',#10202); +#10202 = CARTESIAN_POINT('',(-1.680085640382,-4.160171280765,1.75)); +#10203 = SURFACE_CURVE('',#10204,(#10208,#10215),.PCURVE_S1.); +#10204 = LINE('',#10205,#10206); +#10205 = CARTESIAN_POINT('',(-1.680085640382,-4.160171280765,1.75)); +#10206 = VECTOR('',#10207,1.); +#10207 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#10208 = PCURVE('',#5614,#10209); +#10209 = DEFINITIONAL_REPRESENTATION('',(#10210),#10214); +#10210 = LINE('',#10211,#10212); +#10211 = CARTESIAN_POINT('',(7.714959117345,-3.115687108633)); +#10212 = VECTOR('',#10213,1.); +#10213 = DIRECTION('',(-0.920445682901,-0.390870496236)); +#10214 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10215 = PCURVE('',#10216,#10221); +#10216 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#10217,#10218) + ,(#10219,#10220 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#10217 = CARTESIAN_POINT('',(-1.7375,-4.275,1.025)); +#10218 = CARTESIAN_POINT('',(-1.680085640382,-4.160171280765,1.75)); +#10219 = CARTESIAN_POINT('',(-1.875,-4.1375,1.025)); +#10220 = CARTESIAN_POINT('',(-1.760171280765,-4.080085640382,1.75)); +#10221 = DEFINITIONAL_REPRESENTATION('',(#10222),#10225); +#10222 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#10223,#10224),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,0.113258198781),.PIECEWISE_BEZIER_KNOTS.); +#10223 = CARTESIAN_POINT('',(6.820209157072E-16,1.)); +#10224 = CARTESIAN_POINT('',(0.194454364826,1.)); +#10225 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10226 = ORIENTED_EDGE('',*,*,#10227,.F.); +#10227 = EDGE_CURVE('',#10228,#10201,#10230,.T.); +#10228 = VERTEX_POINT('',#10229); +#10229 = CARTESIAN_POINT('',(1.680085640382,-4.160171280765,1.75)); +#10230 = SURFACE_CURVE('',#10231,(#10235,#10242),.PCURVE_S1.); +#10231 = LINE('',#10232,#10233); +#10232 = CARTESIAN_POINT('',(1.680085640382,-4.160171280765,1.75)); +#10233 = VECTOR('',#10234,1.); +#10234 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#10235 = PCURVE('',#5614,#10236); +#10236 = DEFINITIONAL_REPRESENTATION('',(#10237),#10241); +#10237 = LINE('',#10238,#10239); +#10238 = CARTESIAN_POINT('',(8.97322970715,4.276579090856E-13)); +#10239 = VECTOR('',#10240,1.); +#10240 = DIRECTION('',(-0.374466205639,-0.927240562548)); +#10241 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10242 = PCURVE('',#10243,#10248); +#10243 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#10244,#10245) + ,(#10246,#10247 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.475),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#10244 = CARTESIAN_POINT('',(1.7375,-4.275,1.025)); +#10245 = CARTESIAN_POINT('',(1.680085640382,-4.160171280765,1.75)); +#10246 = CARTESIAN_POINT('',(-1.7375,-4.275,1.025)); +#10247 = CARTESIAN_POINT('',(-1.680085640382,-4.160171280765,1.75)); +#10248 = DEFINITIONAL_REPRESENTATION('',(#10249),#10252); +#10249 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#10250,#10251),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,3.360171280764),.PIECEWISE_BEZIER_KNOTS.); +#10250 = CARTESIAN_POINT('',(2.75143737505E-16,1.)); +#10251 = CARTESIAN_POINT('',(3.475,1.)); +#10252 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10253 = ORIENTED_EDGE('',*,*,#10254,.F.); +#10254 = EDGE_CURVE('',#5573,#10228,#10255,.T.); +#10255 = SURFACE_CURVE('',#10256,(#10260,#10267),.PCURVE_S1.); +#10256 = LINE('',#10257,#10258); +#10257 = CARTESIAN_POINT('',(1.760171280765,-4.080085640382,1.75)); +#10258 = VECTOR('',#10259,1.); +#10259 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#10260 = PCURVE('',#5614,#10261); +#10261 = DEFINITIONAL_REPRESENTATION('',(#10262),#10266); +#10262 = LINE('',#10263,#10264); +#10263 = CARTESIAN_POINT('',(8.92896041879,0.104248020122)); +#10264 = VECTOR('',#10265,1.); +#10265 = DIRECTION('',(0.390870496236,-0.920445682901)); +#10266 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10267 = PCURVE('',#5587,#10268); +#10268 = DEFINITIONAL_REPRESENTATION('',(#10269),#10272); +#10269 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#10270,#10271),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,0.113258198781),.PIECEWISE_BEZIER_KNOTS.); +#10270 = CARTESIAN_POINT('',(-3.937933821297E-16,1.)); +#10271 = CARTESIAN_POINT('',(0.194454364826,1.)); +#10272 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10273 = ORIENTED_EDGE('',*,*,#5599,.F.); +#10274 = ORIENTED_EDGE('',*,*,#10074,.F.); +#10275 = FACE_BOUND('',#10276,.T.); +#10276 = EDGE_LOOP('',(#10277)); +#10277 = ORIENTED_EDGE('',*,*,#10278,.F.); +#10278 = EDGE_CURVE('',#10279,#10279,#10281,.T.); +#10279 = VERTEX_POINT('',#10280); +#10280 = CARTESIAN_POINT('',(-1.110171280765,3.210171280765,1.75)); +#10281 = SURFACE_CURVE('',#10282,(#10287,#10294),.PCURVE_S1.); +#10282 = CIRCLE('',#10283,0.3); +#10283 = AXIS2_PLACEMENT_3D('',#10284,#10285,#10286); +#10284 = CARTESIAN_POINT('',(-1.110171280765,3.510171280765,1.75)); +#10285 = DIRECTION('',(-0.,0.,1.)); +#10286 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#10287 = PCURVE('',#5614,#10288); +#10288 = DEFINITIONAL_REPRESENTATION('',(#10289),#10293); +#10289 = CIRCLE('',#10290,0.3); +#10290 = AXIS2_PLACEMENT_2D('',#10291,#10292); +#10291 = CARTESIAN_POINT('',(0.816120033441,0.28504467775)); +#10292 = DIRECTION('',(0.927240562548,-0.374466205639)); +#10293 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10294 = PCURVE('',#10295,#10300); +#10295 = CYLINDRICAL_SURFACE('',#10296,0.3); +#10296 = AXIS2_PLACEMENT_3D('',#10297,#10298,#10299); +#10297 = CARTESIAN_POINT('',(-1.110171280765,3.510171280765,1.75)); +#10298 = DIRECTION('',(-0.,0.,-1.)); +#10299 = DIRECTION('',(2.22044604925E-16,-1.,-0.)); +#10300 = DEFINITIONAL_REPRESENTATION('',(#10301),#10305); +#10301 = LINE('',#10302,#10303); +#10302 = CARTESIAN_POINT('',(6.28318530718,0.)); +#10303 = VECTOR('',#10304,1.); +#10304 = DIRECTION('',(-1.,0.)); +#10305 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10306 = ADVANCED_FACE('',(#10307),#5587,.F.); +#10307 = FACE_BOUND('',#10308,.F.); +#10308 = EDGE_LOOP('',(#10309,#10331,#10351,#10352)); +#10309 = ORIENTED_EDGE('',*,*,#10310,.T.); +#10310 = EDGE_CURVE('',#5551,#10311,#10313,.T.); +#10311 = VERTEX_POINT('',#10312); +#10312 = CARTESIAN_POINT('',(1.7375,-4.275,1.025)); +#10313 = SURFACE_CURVE('',#10314,(#10318,#10325),.PCURVE_S1.); +#10314 = LINE('',#10315,#10316); +#10315 = CARTESIAN_POINT('',(1.875,-4.1375,1.025)); +#10316 = VECTOR('',#10317,1.); +#10317 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#10318 = PCURVE('',#5587,#10319); +#10319 = DEFINITIONAL_REPRESENTATION('',(#10320),#10324); +#10320 = LINE('',#10321,#10322); +#10321 = CARTESIAN_POINT('',(-6.086888979784E-16,2.525109798792E-16)); +#10322 = VECTOR('',#10323,1.); +#10323 = DIRECTION('',(1.,-1.349776453149E-15)); +#10324 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10325 = PCURVE('',#6631,#10326); +#10326 = DEFINITIONAL_REPRESENTATION('',(#10327),#10330); +#10327 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#10328,#10329),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,0.194454364826),.PIECEWISE_BEZIER_KNOTS.); +#10328 = CARTESIAN_POINT('',(-1.099004758388E-15,1.)); +#10329 = CARTESIAN_POINT('',(0.247487373415,1.)); +#10330 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10331 = ORIENTED_EDGE('',*,*,#10332,.T.); +#10332 = EDGE_CURVE('',#10311,#10228,#10333,.T.); +#10333 = SURFACE_CURVE('',#10334,(#10337,#10344),.PCURVE_S1.); +#10334 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#10335,#10336),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#10335 = CARTESIAN_POINT('',(1.7375,-4.275,1.025)); +#10336 = CARTESIAN_POINT('',(1.680085640382,-4.160171280765,1.75)); +#10337 = PCURVE('',#5587,#10338); +#10338 = DEFINITIONAL_REPRESENTATION('',(#10339),#10343); +#10339 = LINE('',#10340,#10341); +#10340 = CARTESIAN_POINT('',(0.194454364826,-9.958942974993E-18)); +#10341 = VECTOR('',#10342,1.); +#10342 = DIRECTION('',(-2.498001805407E-16,1.)); +#10343 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10344 = PCURVE('',#10243,#10345); +#10345 = DEFINITIONAL_REPRESENTATION('',(#10346),#10350); +#10346 = LINE('',#10347,#10348); +#10347 = CARTESIAN_POINT('',(1.10407393921E-16,9.850164341594E-17)); +#10348 = VECTOR('',#10349,1.); +#10349 = DIRECTION('',(1.534973222091E-16,1.)); +#10350 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10351 = ORIENTED_EDGE('',*,*,#10254,.F.); +#10352 = ORIENTED_EDGE('',*,*,#5572,.F.); +#10353 = ADVANCED_FACE('',(#10354),#5288,.F.); +#10354 = FACE_BOUND('',#10355,.F.); +#10355 = EDGE_LOOP('',(#10356,#10357,#10378,#10379,#10380,#10381)); +#10356 = ORIENTED_EDGE('',*,*,#5941,.F.); +#10357 = ORIENTED_EDGE('',*,*,#10358,.T.); +#10358 = EDGE_CURVE('',#5913,#7804,#10359,.T.); +#10359 = SURFACE_CURVE('',#10360,(#10364,#10371),.PCURVE_S1.); +#10360 = LINE('',#10361,#10362); +#10361 = CARTESIAN_POINT('',(2.25,2.745,1.025)); +#10362 = VECTOR('',#10363,1.); +#10363 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#10364 = PCURVE('',#5288,#10365); +#10365 = DEFINITIONAL_REPRESENTATION('',(#10366),#10370); +#10366 = LINE('',#10367,#10368); +#10367 = CARTESIAN_POINT('',(-0.,0.)); +#10368 = VECTOR('',#10369,1.); +#10369 = DIRECTION('',(0.,-1.)); +#10370 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10371 = PCURVE('',#5929,#10372); +#10372 = DEFINITIONAL_REPRESENTATION('',(#10373),#10377); +#10373 = LINE('',#10374,#10375); +#10374 = CARTESIAN_POINT('',(4.712388980385,0.)); +#10375 = VECTOR('',#10376,1.); +#10376 = DIRECTION('',(0.,-1.)); +#10377 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10378 = ORIENTED_EDGE('',*,*,#7827,.T.); +#10379 = ORIENTED_EDGE('',*,*,#8123,.T.); +#10380 = ORIENTED_EDGE('',*,*,#5272,.F.); +#10381 = ORIENTED_EDGE('',*,*,#5656,.F.); +#10382 = ADVANCED_FACE('',(#10383),#5538,.F.); +#10383 = FACE_BOUND('',#10384,.F.); +#10384 = EDGE_LOOP('',(#10385,#10386,#10407,#10408,#10409,#10410)); +#10385 = ORIENTED_EDGE('',*,*,#7198,.F.); +#10386 = ORIENTED_EDGE('',*,*,#10387,.T.); +#10387 = EDGE_CURVE('',#7175,#6880,#10388,.T.); +#10388 = SURFACE_CURVE('',#10389,(#10393,#10400),.PCURVE_S1.); +#10389 = LINE('',#10390,#10391); +#10390 = CARTESIAN_POINT('',(2.25,-3.605,1.025)); +#10391 = VECTOR('',#10392,1.); +#10392 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#10393 = PCURVE('',#5538,#10394); +#10394 = DEFINITIONAL_REPRESENTATION('',(#10395),#10399); +#10395 = LINE('',#10396,#10397); +#10396 = CARTESIAN_POINT('',(-0.,0.)); +#10397 = VECTOR('',#10398,1.); +#10398 = DIRECTION('',(0.,-1.)); +#10399 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10400 = PCURVE('',#6896,#10401); +#10401 = DEFINITIONAL_REPRESENTATION('',(#10402),#10406); +#10402 = LINE('',#10403,#10404); +#10403 = CARTESIAN_POINT('',(4.712388980385,0.)); +#10404 = VECTOR('',#10405,1.); +#10405 = DIRECTION('',(0.,-1.)); +#10406 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10407 = ORIENTED_EDGE('',*,*,#6908,.T.); +#10408 = ORIENTED_EDGE('',*,*,#6932,.T.); +#10409 = ORIENTED_EDGE('',*,*,#5522,.F.); +#10410 = ORIENTED_EDGE('',*,*,#7555,.F.); +#10411 = ADVANCED_FACE('',(#10412),#5338,.F.); +#10412 = FACE_BOUND('',#10413,.F.); +#10413 = EDGE_LOOP('',(#10414,#10415,#10436,#10437,#10438,#10439)); +#10414 = ORIENTED_EDGE('',*,*,#8429,.F.); +#10415 = ORIENTED_EDGE('',*,*,#10416,.T.); +#10416 = EDGE_CURVE('',#8401,#9008,#10417,.T.); +#10417 = SURFACE_CURVE('',#10418,(#10422,#10429),.PCURVE_S1.); +#10418 = LINE('',#10419,#10420); +#10419 = CARTESIAN_POINT('',(2.25,1.475,1.025)); +#10420 = VECTOR('',#10421,1.); +#10421 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#10422 = PCURVE('',#5338,#10423); +#10423 = DEFINITIONAL_REPRESENTATION('',(#10424),#10428); +#10424 = LINE('',#10425,#10426); +#10425 = CARTESIAN_POINT('',(-0.,0.)); +#10426 = VECTOR('',#10427,1.); +#10427 = DIRECTION('',(0.,-1.)); +#10428 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10429 = PCURVE('',#8417,#10430); +#10430 = DEFINITIONAL_REPRESENTATION('',(#10431),#10435); +#10431 = LINE('',#10432,#10433); +#10432 = CARTESIAN_POINT('',(4.712388980385,0.)); +#10433 = VECTOR('',#10434,1.); +#10434 = DIRECTION('',(0.,-1.)); +#10435 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10436 = ORIENTED_EDGE('',*,*,#9031,.T.); +#10437 = ORIENTED_EDGE('',*,*,#9327,.T.); +#10438 = ORIENTED_EDGE('',*,*,#5322,.F.); +#10439 = ORIENTED_EDGE('',*,*,#8144,.F.); +#10440 = ADVANCED_FACE('',(#10441),#5488,.F.); +#10441 = FACE_BOUND('',#10442,.F.); +#10442 = EDGE_LOOP('',(#10443,#10444,#10465,#10466,#10467,#10468)); +#10443 = ORIENTED_EDGE('',*,*,#8072,.F.); +#10444 = ORIENTED_EDGE('',*,*,#10445,.T.); +#10445 = EDGE_CURVE('',#8049,#7482,#10446,.T.); +#10446 = SURFACE_CURVE('',#10447,(#10451,#10458),.PCURVE_S1.); +#10447 = LINE('',#10448,#10449); +#10448 = CARTESIAN_POINT('',(2.25,-2.335,1.025)); +#10449 = VECTOR('',#10450,1.); +#10450 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#10451 = PCURVE('',#5488,#10452); +#10452 = DEFINITIONAL_REPRESENTATION('',(#10453),#10457); +#10453 = LINE('',#10454,#10455); +#10454 = CARTESIAN_POINT('',(-0.,0.)); +#10455 = VECTOR('',#10456,1.); +#10456 = DIRECTION('',(0.,-1.)); +#10457 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10458 = PCURVE('',#7498,#10459); +#10459 = DEFINITIONAL_REPRESENTATION('',(#10460),#10464); +#10460 = LINE('',#10461,#10462); +#10461 = CARTESIAN_POINT('',(4.712388980385,0.)); +#10462 = VECTOR('',#10463,1.); +#10463 = DIRECTION('',(0.,-1.)); +#10464 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10465 = ORIENTED_EDGE('',*,*,#7510,.T.); +#10466 = ORIENTED_EDGE('',*,*,#7534,.T.); +#10467 = ORIENTED_EDGE('',*,*,#5472,.F.); +#10468 = ORIENTED_EDGE('',*,*,#8759,.F.); +#10469 = ADVANCED_FACE('',(#10470),#5388,.F.); +#10470 = FACE_BOUND('',#10471,.F.); +#10471 = EDGE_LOOP('',(#10472,#10473,#10494,#10495,#10496,#10497)); +#10472 = ORIENTED_EDGE('',*,*,#9633,.F.); +#10473 = ORIENTED_EDGE('',*,*,#10474,.T.); +#10474 = EDGE_CURVE('',#9605,#9855,#10475,.T.); +#10475 = SURFACE_CURVE('',#10476,(#10480,#10487),.PCURVE_S1.); +#10476 = LINE('',#10477,#10478); +#10477 = CARTESIAN_POINT('',(2.25,0.205,1.025)); +#10478 = VECTOR('',#10479,1.); +#10479 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#10480 = PCURVE('',#5388,#10481); +#10481 = DEFINITIONAL_REPRESENTATION('',(#10482),#10486); +#10482 = LINE('',#10483,#10484); +#10483 = CARTESIAN_POINT('',(-0.,0.)); +#10484 = VECTOR('',#10485,1.); +#10485 = DIRECTION('',(0.,-1.)); +#10486 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10487 = PCURVE('',#9621,#10488); +#10488 = DEFINITIONAL_REPRESENTATION('',(#10489),#10493); +#10489 = LINE('',#10490,#10491); +#10490 = CARTESIAN_POINT('',(4.712388980385,0.)); +#10491 = VECTOR('',#10492,1.); +#10492 = DIRECTION('',(0.,-1.)); +#10493 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10494 = ORIENTED_EDGE('',*,*,#9878,.T.); +#10495 = ORIENTED_EDGE('',*,*,#9902,.T.); +#10496 = ORIENTED_EDGE('',*,*,#5372,.F.); +#10497 = ORIENTED_EDGE('',*,*,#9348,.F.); +#10498 = ADVANCED_FACE('',(#10499),#5438,.F.); +#10499 = FACE_BOUND('',#10500,.F.); +#10500 = EDGE_LOOP('',(#10501,#10502,#10523,#10524,#10525,#10526)); +#10501 = ORIENTED_EDGE('',*,*,#9276,.F.); +#10502 = ORIENTED_EDGE('',*,*,#10503,.T.); +#10503 = EDGE_CURVE('',#9253,#8686,#10504,.T.); +#10504 = SURFACE_CURVE('',#10505,(#10509,#10516),.PCURVE_S1.); +#10505 = LINE('',#10506,#10507); +#10506 = CARTESIAN_POINT('',(2.25,-1.065,1.025)); +#10507 = VECTOR('',#10508,1.); +#10508 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#10509 = PCURVE('',#5438,#10510); +#10510 = DEFINITIONAL_REPRESENTATION('',(#10511),#10515); +#10511 = LINE('',#10512,#10513); +#10512 = CARTESIAN_POINT('',(-0.,0.)); +#10513 = VECTOR('',#10514,1.); +#10514 = DIRECTION('',(0.,-1.)); +#10515 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10516 = PCURVE('',#8702,#10517); +#10517 = DEFINITIONAL_REPRESENTATION('',(#10518),#10522); +#10518 = LINE('',#10519,#10520); +#10519 = CARTESIAN_POINT('',(4.712388980385,0.)); +#10520 = VECTOR('',#10521,1.); +#10521 = DIRECTION('',(0.,-1.)); +#10522 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10523 = ORIENTED_EDGE('',*,*,#8714,.T.); +#10524 = ORIENTED_EDGE('',*,*,#8738,.T.); +#10525 = ORIENTED_EDGE('',*,*,#5422,.F.); +#10526 = ORIENTED_EDGE('',*,*,#9923,.F.); +#10527 = ADVANCED_FACE('',(#10528),#5929,.T.); +#10528 = FACE_BOUND('',#10529,.T.); +#10529 = EDGE_LOOP('',(#10530,#10531,#10532,#10533)); +#10530 = ORIENTED_EDGE('',*,*,#5912,.T.); +#10531 = ORIENTED_EDGE('',*,*,#10358,.T.); +#10532 = ORIENTED_EDGE('',*,*,#7803,.F.); +#10533 = ORIENTED_EDGE('',*,*,#10534,.F.); +#10534 = EDGE_CURVE('',#5885,#7781,#10535,.T.); +#10535 = SURFACE_CURVE('',#10536,(#10540,#10547),.PCURVE_S1.); +#10536 = LINE('',#10537,#10538); +#10537 = CARTESIAN_POINT('',(2.55,2.745,0.725)); +#10538 = VECTOR('',#10539,1.); +#10539 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#10540 = PCURVE('',#5929,#10541); +#10541 = DEFINITIONAL_REPRESENTATION('',(#10542),#10546); +#10542 = LINE('',#10543,#10544); +#10543 = CARTESIAN_POINT('',(6.28318530718,0.)); +#10544 = VECTOR('',#10545,1.); +#10545 = DIRECTION('',(0.,-1.)); +#10546 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10547 = PCURVE('',#5900,#10548); +#10548 = DEFINITIONAL_REPRESENTATION('',(#10549),#10553); +#10549 = LINE('',#10550,#10551); +#10550 = CARTESIAN_POINT('',(0.425,0.)); +#10551 = VECTOR('',#10552,1.); +#10552 = DIRECTION('',(0.,-1.)); +#10553 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10554 = ADVANCED_FACE('',(#10555),#5900,.F.); +#10555 = FACE_BOUND('',#10556,.F.); +#10556 = EDGE_LOOP('',(#10557,#10578,#10579,#10580)); +#10557 = ORIENTED_EDGE('',*,*,#10558,.T.); +#10558 = EDGE_CURVE('',#5852,#7753,#10559,.T.); +#10559 = SURFACE_CURVE('',#10560,(#10564,#10571),.PCURVE_S1.); +#10560 = LINE('',#10561,#10562); +#10561 = CARTESIAN_POINT('',(2.55,2.745,0.3)); +#10562 = VECTOR('',#10563,1.); +#10563 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#10564 = PCURVE('',#5900,#10565); +#10565 = DEFINITIONAL_REPRESENTATION('',(#10566),#10570); +#10566 = LINE('',#10567,#10568); +#10567 = CARTESIAN_POINT('',(0.,0.)); +#10568 = VECTOR('',#10569,1.); +#10569 = DIRECTION('',(0.,-1.)); +#10570 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10571 = PCURVE('',#5872,#10572); +#10572 = DEFINITIONAL_REPRESENTATION('',(#10573),#10577); +#10573 = LINE('',#10574,#10575); +#10574 = CARTESIAN_POINT('',(1.570796326795,0.)); +#10575 = VECTOR('',#10576,1.); +#10576 = DIRECTION('',(0.,-1.)); +#10577 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10578 = ORIENTED_EDGE('',*,*,#7780,.T.); +#10579 = ORIENTED_EDGE('',*,*,#10534,.F.); +#10580 = ORIENTED_EDGE('',*,*,#5884,.F.); +#10581 = ADVANCED_FACE('',(#10582),#5872,.F.); +#10582 = FACE_BOUND('',#10583,.F.); +#10583 = EDGE_LOOP('',(#10584,#10605,#10606,#10607)); +#10584 = ORIENTED_EDGE('',*,*,#10585,.T.); +#10585 = EDGE_CURVE('',#5824,#7730,#10586,.T.); +#10586 = SURFACE_CURVE('',#10587,(#10591,#10598),.PCURVE_S1.); +#10587 = LINE('',#10588,#10589); +#10588 = CARTESIAN_POINT('',(2.65,2.745,0.2)); +#10589 = VECTOR('',#10590,1.); +#10590 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#10591 = PCURVE('',#5872,#10592); +#10592 = DEFINITIONAL_REPRESENTATION('',(#10593),#10597); +#10593 = LINE('',#10594,#10595); +#10594 = CARTESIAN_POINT('',(0.,0.)); +#10595 = VECTOR('',#10596,1.); +#10596 = DIRECTION('',(0.,-1.)); +#10597 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10598 = PCURVE('',#5839,#10599); +#10599 = DEFINITIONAL_REPRESENTATION('',(#10600),#10604); +#10600 = LINE('',#10601,#10602); +#10601 = CARTESIAN_POINT('',(0.35,7.771561172375E-17)); +#10602 = VECTOR('',#10603,1.); +#10603 = DIRECTION('',(0.,-1.)); +#10604 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10605 = ORIENTED_EDGE('',*,*,#7752,.T.); +#10606 = ORIENTED_EDGE('',*,*,#10558,.F.); +#10607 = ORIENTED_EDGE('',*,*,#5851,.F.); +#10608 = ADVANCED_FACE('',(#10609),#5839,.F.); +#10609 = FACE_BOUND('',#10610,.F.); +#10610 = EDGE_LOOP('',(#10611,#10632,#10633,#10634)); +#10611 = ORIENTED_EDGE('',*,*,#10612,.T.); +#10612 = EDGE_CURVE('',#5796,#7707,#10613,.T.); +#10613 = SURFACE_CURVE('',#10614,(#10618,#10625),.PCURVE_S1.); +#10614 = LINE('',#10615,#10616); +#10615 = CARTESIAN_POINT('',(3.,2.745,0.2)); +#10616 = VECTOR('',#10617,1.); +#10617 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#10618 = PCURVE('',#5839,#10619); +#10619 = DEFINITIONAL_REPRESENTATION('',(#10620),#10624); +#10620 = LINE('',#10621,#10622); +#10621 = CARTESIAN_POINT('',(-0.,0.)); +#10622 = VECTOR('',#10623,1.); +#10623 = DIRECTION('',(0.,-1.)); +#10624 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10625 = PCURVE('',#5811,#10626); +#10626 = DEFINITIONAL_REPRESENTATION('',(#10627),#10631); +#10627 = LINE('',#10628,#10629); +#10628 = CARTESIAN_POINT('',(0.2,0.)); +#10629 = VECTOR('',#10630,1.); +#10630 = DIRECTION('',(0.,-1.)); +#10631 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10632 = ORIENTED_EDGE('',*,*,#7729,.T.); +#10633 = ORIENTED_EDGE('',*,*,#10585,.F.); +#10634 = ORIENTED_EDGE('',*,*,#5823,.F.); +#10635 = ADVANCED_FACE('',(#10636),#5811,.F.); +#10636 = FACE_BOUND('',#10637,.F.); +#10637 = EDGE_LOOP('',(#10638,#10659,#10660,#10661)); +#10638 = ORIENTED_EDGE('',*,*,#10639,.T.); +#10639 = EDGE_CURVE('',#5768,#7684,#10640,.T.); +#10640 = SURFACE_CURVE('',#10641,(#10645,#10652),.PCURVE_S1.); +#10641 = LINE('',#10642,#10643); +#10642 = CARTESIAN_POINT('',(3.,2.745,5.551115123126E-17)); +#10643 = VECTOR('',#10644,1.); +#10644 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#10645 = PCURVE('',#5811,#10646); +#10646 = DEFINITIONAL_REPRESENTATION('',(#10647),#10651); +#10647 = LINE('',#10648,#10649); +#10648 = CARTESIAN_POINT('',(0.,0.)); +#10649 = VECTOR('',#10650,1.); +#10650 = DIRECTION('',(0.,-1.)); +#10651 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10652 = PCURVE('',#5783,#10653); +#10653 = DEFINITIONAL_REPRESENTATION('',(#10654),#10658); +#10654 = LINE('',#10655,#10656); +#10655 = CARTESIAN_POINT('',(0.35,-7.771561172375E-17)); +#10656 = VECTOR('',#10657,1.); +#10657 = DIRECTION('',(0.,-1.)); +#10658 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10659 = ORIENTED_EDGE('',*,*,#7706,.T.); +#10660 = ORIENTED_EDGE('',*,*,#10612,.F.); +#10661 = ORIENTED_EDGE('',*,*,#5795,.F.); +#10662 = ADVANCED_FACE('',(#10663),#5783,.F.); +#10663 = FACE_BOUND('',#10664,.F.); +#10664 = EDGE_LOOP('',(#10665,#10686,#10687,#10688)); +#10665 = ORIENTED_EDGE('',*,*,#10666,.T.); +#10666 = EDGE_CURVE('',#5739,#7660,#10667,.T.); +#10667 = SURFACE_CURVE('',#10668,(#10672,#10679),.PCURVE_S1.); +#10668 = LINE('',#10669,#10670); +#10669 = CARTESIAN_POINT('',(2.65,2.745,5.551115123126E-17)); +#10670 = VECTOR('',#10671,1.); +#10671 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#10672 = PCURVE('',#5783,#10673); +#10673 = DEFINITIONAL_REPRESENTATION('',(#10674),#10678); +#10674 = LINE('',#10675,#10676); +#10675 = CARTESIAN_POINT('',(0.,0.)); +#10676 = VECTOR('',#10677,1.); +#10677 = DIRECTION('',(0.,-1.)); +#10678 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10679 = PCURVE('',#5755,#10680); +#10680 = DEFINITIONAL_REPRESENTATION('',(#10681),#10685); +#10681 = LINE('',#10682,#10683); +#10682 = CARTESIAN_POINT('',(4.712388980385,0.)); +#10683 = VECTOR('',#10684,1.); +#10684 = DIRECTION('',(0.,-1.)); +#10685 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10686 = ORIENTED_EDGE('',*,*,#7683,.T.); +#10687 = ORIENTED_EDGE('',*,*,#10639,.F.); +#10688 = ORIENTED_EDGE('',*,*,#5767,.F.); +#10689 = ADVANCED_FACE('',(#10690),#5755,.T.); +#10690 = FACE_BOUND('',#10691,.T.); +#10691 = EDGE_LOOP('',(#10692,#10693,#10694,#10695)); +#10692 = ORIENTED_EDGE('',*,*,#5738,.T.); +#10693 = ORIENTED_EDGE('',*,*,#10666,.T.); +#10694 = ORIENTED_EDGE('',*,*,#7659,.F.); +#10695 = ORIENTED_EDGE('',*,*,#10696,.F.); +#10696 = EDGE_CURVE('',#5711,#7637,#10697,.T.); +#10697 = SURFACE_CURVE('',#10698,(#10702,#10709),.PCURVE_S1.); +#10698 = LINE('',#10699,#10700); +#10699 = CARTESIAN_POINT('',(2.35,2.745,0.3)); +#10700 = VECTOR('',#10701,1.); +#10701 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#10702 = PCURVE('',#5755,#10703); +#10703 = DEFINITIONAL_REPRESENTATION('',(#10704),#10708); +#10704 = LINE('',#10705,#10706); +#10705 = CARTESIAN_POINT('',(6.28318530718,0.)); +#10706 = VECTOR('',#10707,1.); +#10707 = DIRECTION('',(0.,-1.)); +#10708 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10709 = PCURVE('',#5726,#10710); +#10710 = DEFINITIONAL_REPRESENTATION('',(#10711),#10715); +#10711 = LINE('',#10712,#10713); +#10712 = CARTESIAN_POINT('',(0.425,-9.860761315258E-32)); +#10713 = VECTOR('',#10714,1.); +#10714 = DIRECTION('',(7.584527938158E-44,-1.)); +#10715 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10716 = ADVANCED_FACE('',(#10717),#5726,.F.); +#10717 = FACE_BOUND('',#10718,.F.); +#10718 = EDGE_LOOP('',(#10719,#10720,#10721,#10722)); +#10719 = ORIENTED_EDGE('',*,*,#7608,.T.); +#10720 = ORIENTED_EDGE('',*,*,#7636,.T.); +#10721 = ORIENTED_EDGE('',*,*,#10696,.F.); +#10722 = ORIENTED_EDGE('',*,*,#5710,.F.); +#10723 = ADVANCED_FACE('',(#10724),#6050,.F.); +#10724 = FACE_BOUND('',#10725,.F.); +#10725 = EDGE_LOOP('',(#10726,#10727,#10747,#10773)); +#10726 = ORIENTED_EDGE('',*,*,#6036,.T.); +#10727 = ORIENTED_EDGE('',*,*,#10728,.T.); +#10728 = EDGE_CURVE('',#6015,#10729,#10731,.T.); +#10729 = VERTEX_POINT('',#10730); +#10730 = CARTESIAN_POINT('',(-1.775,-4.35,1.025)); +#10731 = SURFACE_CURVE('',#10732,(#10735,#10741),.PCURVE_S1.); +#10732 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#10733,#10734),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#10733 = CARTESIAN_POINT('',(-1.775,-4.35,0.825)); +#10734 = CARTESIAN_POINT('',(-1.775,-4.35,1.025)); +#10735 = PCURVE('',#6050,#10736); +#10736 = DEFINITIONAL_REPRESENTATION('',(#10737),#10740); +#10737 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#10738,#10739),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#10738 = CARTESIAN_POINT('',(3.55,-0.2)); +#10739 = CARTESIAN_POINT('',(3.55,0.)); +#10740 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10741 = PCURVE('',#6103,#10742); +#10742 = DEFINITIONAL_REPRESENTATION('',(#10743),#10746); +#10743 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#10744,#10745),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#10744 = CARTESIAN_POINT('',(0.,-0.2)); +#10745 = CARTESIAN_POINT('',(0.,0.)); +#10746 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10747 = ORIENTED_EDGE('',*,*,#10748,.F.); +#10748 = EDGE_CURVE('',#6598,#10729,#10749,.T.); +#10749 = SURFACE_CURVE('',#10750,(#10754,#10761),.PCURVE_S1.); +#10750 = LINE('',#10751,#10752); +#10751 = CARTESIAN_POINT('',(1.775,-4.35,1.025)); +#10752 = VECTOR('',#10753,1.); +#10753 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#10754 = PCURVE('',#6050,#10755); +#10755 = DEFINITIONAL_REPRESENTATION('',(#10756),#10760); +#10756 = LINE('',#10757,#10758); +#10757 = CARTESIAN_POINT('',(0.,0.)); +#10758 = VECTOR('',#10759,1.); +#10759 = DIRECTION('',(1.,0.)); +#10760 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10761 = PCURVE('',#10762,#10767); +#10762 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#10763,#10764) + ,(#10765,#10766 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.55),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#10763 = CARTESIAN_POINT('',(1.775,-4.35,1.025)); +#10764 = CARTESIAN_POINT('',(1.7375,-4.275,1.025)); +#10765 = CARTESIAN_POINT('',(-1.775,-4.35,1.025)); +#10766 = CARTESIAN_POINT('',(-1.7375,-4.275,1.025)); +#10767 = DEFINITIONAL_REPRESENTATION('',(#10768),#10772); +#10768 = LINE('',#10769,#10770); +#10769 = CARTESIAN_POINT('',(3.564514819754E-17,1.042859870759E-15)); +#10770 = VECTOR('',#10771,1.); +#10771 = DIRECTION('',(1.,-3.335799961041E-15)); +#10772 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10773 = ORIENTED_EDGE('',*,*,#6597,.F.); +#10774 = ADVANCED_FACE('',(#10775),#6103,.F.); +#10775 = FACE_BOUND('',#10776,.F.); +#10776 = EDGE_LOOP('',(#10777,#10778,#10798,#10824)); +#10777 = ORIENTED_EDGE('',*,*,#6089,.T.); +#10778 = ORIENTED_EDGE('',*,*,#10779,.T.); +#10779 = EDGE_CURVE('',#6068,#10780,#10782,.T.); +#10780 = VERTEX_POINT('',#10781); +#10781 = CARTESIAN_POINT('',(-1.95,-4.175,1.025)); +#10782 = SURFACE_CURVE('',#10783,(#10786,#10792),.PCURVE_S1.); +#10783 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#10784,#10785),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#10784 = CARTESIAN_POINT('',(-1.95,-4.175,0.825)); +#10785 = CARTESIAN_POINT('',(-1.95,-4.175,1.025)); +#10786 = PCURVE('',#6103,#10787); +#10787 = DEFINITIONAL_REPRESENTATION('',(#10788),#10791); +#10788 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#10789,#10790),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#10789 = CARTESIAN_POINT('',(0.247487373415,-0.2)); +#10790 = CARTESIAN_POINT('',(0.247487373415,0.)); +#10791 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10792 = PCURVE('',#6548,#10793); +#10793 = DEFINITIONAL_REPRESENTATION('',(#10794),#10797); +#10794 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#10795,#10796),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#10795 = CARTESIAN_POINT('',(0.,-0.2)); +#10796 = CARTESIAN_POINT('',(0.,0.)); +#10797 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10798 = ORIENTED_EDGE('',*,*,#10799,.F.); +#10799 = EDGE_CURVE('',#10729,#10780,#10800,.T.); +#10800 = SURFACE_CURVE('',#10801,(#10805,#10812),.PCURVE_S1.); +#10801 = LINE('',#10802,#10803); +#10802 = CARTESIAN_POINT('',(-1.775,-4.35,1.025)); +#10803 = VECTOR('',#10804,1.); +#10804 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#10805 = PCURVE('',#6103,#10806); +#10806 = DEFINITIONAL_REPRESENTATION('',(#10807),#10811); +#10807 = LINE('',#10808,#10809); +#10808 = CARTESIAN_POINT('',(0.,0.)); +#10809 = VECTOR('',#10810,1.); +#10810 = DIRECTION('',(1.,0.)); +#10811 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10812 = PCURVE('',#10813,#10818); +#10813 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#10814,#10815) + ,(#10816,#10817 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#10814 = CARTESIAN_POINT('',(-1.775,-4.35,1.025)); +#10815 = CARTESIAN_POINT('',(-1.7375,-4.275,1.025)); +#10816 = CARTESIAN_POINT('',(-1.95,-4.175,1.025)); +#10817 = CARTESIAN_POINT('',(-1.875,-4.1375,1.025)); +#10818 = DEFINITIONAL_REPRESENTATION('',(#10819),#10823); +#10819 = LINE('',#10820,#10821); +#10820 = CARTESIAN_POINT('',(-1.424868498589E-16,-5.311956991949E-15)); +#10821 = VECTOR('',#10822,1.); +#10822 = DIRECTION('',(1.,2.43255418999E-14)); +#10823 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10824 = ORIENTED_EDGE('',*,*,#10728,.F.); +#10825 = ADVANCED_FACE('',(#10826),#6548,.F.); +#10826 = FACE_BOUND('',#10827,.F.); +#10827 = EDGE_LOOP('',(#10828,#10829,#10830,#10858)); +#10828 = ORIENTED_EDGE('',*,*,#10779,.F.); +#10829 = ORIENTED_EDGE('',*,*,#6534,.T.); +#10830 = ORIENTED_EDGE('',*,*,#10831,.T.); +#10831 = EDGE_CURVE('',#6507,#10832,#10834,.T.); +#10832 = VERTEX_POINT('',#10833); +#10833 = CARTESIAN_POINT('',(-1.95,-4.015,1.025)); +#10834 = SURFACE_CURVE('',#10835,(#10839,#10846),.PCURVE_S1.); +#10835 = LINE('',#10836,#10837); +#10836 = CARTESIAN_POINT('',(-1.95,-4.015,0.778829828783)); +#10837 = VECTOR('',#10838,1.); +#10838 = DIRECTION('',(0.,0.,1.)); +#10839 = PCURVE('',#6548,#10840); +#10840 = DEFINITIONAL_REPRESENTATION('',(#10841),#10845); +#10841 = LINE('',#10842,#10843); +#10842 = CARTESIAN_POINT('',(0.16,-0.246170171217)); +#10843 = VECTOR('',#10844,1.); +#10844 = DIRECTION('',(0.,1.)); +#10845 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10846 = PCURVE('',#10847,#10852); +#10847 = PLANE('',#10848); +#10848 = AXIS2_PLACEMENT_3D('',#10849,#10850,#10851); +#10849 = CARTESIAN_POINT('',(-2.41578967201,-4.015,0.532659657565)); +#10850 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#10851 = DIRECTION('',(0.,0.,1.)); +#10852 = DEFINITIONAL_REPRESENTATION('',(#10853),#10857); +#10853 = LINE('',#10854,#10855); +#10854 = CARTESIAN_POINT('',(0.246170171218,0.46578967201)); +#10855 = VECTOR('',#10856,1.); +#10856 = DIRECTION('',(1.,0.)); +#10857 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10858 = ORIENTED_EDGE('',*,*,#10859,.F.); +#10859 = EDGE_CURVE('',#10780,#10832,#10860,.T.); +#10860 = SURFACE_CURVE('',#10861,(#10865,#10872),.PCURVE_S1.); +#10861 = LINE('',#10862,#10863); +#10862 = CARTESIAN_POINT('',(-1.95,-4.175,1.025)); +#10863 = VECTOR('',#10864,1.); +#10864 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#10865 = PCURVE('',#6548,#10866); +#10866 = DEFINITIONAL_REPRESENTATION('',(#10867),#10871); +#10867 = LINE('',#10868,#10869); +#10868 = CARTESIAN_POINT('',(0.,0.)); +#10869 = VECTOR('',#10870,1.); +#10870 = DIRECTION('',(1.,0.)); +#10871 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10872 = PCURVE('',#10873,#10878); +#10873 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#10874,#10875) + ,(#10876,#10877 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,8.35),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#10874 = CARTESIAN_POINT('',(-1.95,-4.175,1.025)); +#10875 = CARTESIAN_POINT('',(-1.875,-4.1375,1.025)); +#10876 = CARTESIAN_POINT('',(-1.95,4.175,1.025)); +#10877 = CARTESIAN_POINT('',(-1.875,4.1375,1.025)); +#10878 = DEFINITIONAL_REPRESENTATION('',(#10879),#10883); +#10879 = LINE('',#10880,#10881); +#10880 = CARTESIAN_POINT('',(-3.250147938153E-16,1.933901861802E-15)); +#10881 = VECTOR('',#10882,1.); +#10882 = DIRECTION('',(1.,-2.229871417061E-14)); +#10883 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10884 = ADVANCED_FACE('',(#10885),#6158,.F.); +#10885 = FACE_BOUND('',#10886,.F.); +#10886 = EDGE_LOOP('',(#10887,#10915,#10916,#10936)); +#10887 = ORIENTED_EDGE('',*,*,#10888,.F.); +#10888 = EDGE_CURVE('',#6143,#10889,#10891,.T.); +#10889 = VERTEX_POINT('',#10890); +#10890 = CARTESIAN_POINT('',(-1.95,4.015,1.025)); +#10891 = SURFACE_CURVE('',#10892,(#10896,#10903),.PCURVE_S1.); +#10892 = LINE('',#10893,#10894); +#10893 = CARTESIAN_POINT('',(-1.95,4.015,0.778829828783)); +#10894 = VECTOR('',#10895,1.); +#10895 = DIRECTION('',(0.,0.,1.)); +#10896 = PCURVE('',#6158,#10897); +#10897 = DEFINITIONAL_REPRESENTATION('',(#10898),#10902); +#10898 = LINE('',#10899,#10900); +#10899 = CARTESIAN_POINT('',(8.19,-0.246170171217)); +#10900 = VECTOR('',#10901,1.); +#10901 = DIRECTION('',(0.,1.)); +#10902 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10903 = PCURVE('',#10904,#10909); +#10904 = PLANE('',#10905); +#10905 = AXIS2_PLACEMENT_3D('',#10906,#10907,#10908); +#10906 = CARTESIAN_POINT('',(-2.41578967201,4.015,0.532659657565)); +#10907 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#10908 = DIRECTION('',(0.,0.,1.)); +#10909 = DEFINITIONAL_REPRESENTATION('',(#10910),#10914); +#10910 = LINE('',#10911,#10912); +#10911 = CARTESIAN_POINT('',(0.246170171218,0.46578967201)); +#10912 = VECTOR('',#10913,1.); +#10913 = DIRECTION('',(1.,0.)); +#10914 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10915 = ORIENTED_EDGE('',*,*,#6142,.T.); +#10916 = ORIENTED_EDGE('',*,*,#10917,.T.); +#10917 = EDGE_CURVE('',#6121,#10918,#10920,.T.); +#10918 = VERTEX_POINT('',#10919); +#10919 = CARTESIAN_POINT('',(-1.95,4.175,1.025)); +#10920 = SURFACE_CURVE('',#10921,(#10924,#10930),.PCURVE_S1.); +#10921 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#10922,#10923),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#10922 = CARTESIAN_POINT('',(-1.95,4.175,0.825)); +#10923 = CARTESIAN_POINT('',(-1.95,4.175,1.025)); +#10924 = PCURVE('',#6158,#10925); +#10925 = DEFINITIONAL_REPRESENTATION('',(#10926),#10929); +#10926 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#10927,#10928),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#10927 = CARTESIAN_POINT('',(8.35,-0.2)); +#10928 = CARTESIAN_POINT('',(8.35,0.)); +#10929 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10930 = PCURVE('',#6580,#10931); +#10931 = DEFINITIONAL_REPRESENTATION('',(#10932),#10935); +#10932 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#10933,#10934),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#10933 = CARTESIAN_POINT('',(0.,-0.2)); +#10934 = CARTESIAN_POINT('',(0.,0.)); +#10935 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10936 = ORIENTED_EDGE('',*,*,#10937,.F.); +#10937 = EDGE_CURVE('',#10889,#10918,#10938,.T.); +#10938 = SURFACE_CURVE('',#10939,(#10943,#10950),.PCURVE_S1.); +#10939 = LINE('',#10940,#10941); +#10940 = CARTESIAN_POINT('',(-1.95,-4.175,1.025)); +#10941 = VECTOR('',#10942,1.); +#10942 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#10943 = PCURVE('',#6158,#10944); +#10944 = DEFINITIONAL_REPRESENTATION('',(#10945),#10949); +#10945 = LINE('',#10946,#10947); +#10946 = CARTESIAN_POINT('',(0.,0.)); +#10947 = VECTOR('',#10948,1.); +#10948 = DIRECTION('',(1.,0.)); +#10949 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10950 = PCURVE('',#10951,#10956); +#10951 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#10952,#10953) + ,(#10954,#10955 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,8.35),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#10952 = CARTESIAN_POINT('',(-1.95,-4.175,1.025)); +#10953 = CARTESIAN_POINT('',(-1.875,-4.1375,1.025)); +#10954 = CARTESIAN_POINT('',(-1.95,4.175,1.025)); +#10955 = CARTESIAN_POINT('',(-1.875,4.1375,1.025)); +#10956 = DEFINITIONAL_REPRESENTATION('',(#10957),#10961); +#10957 = LINE('',#10958,#10959); +#10958 = CARTESIAN_POINT('',(0.,9.868171234865E-14)); +#10959 = VECTOR('',#10960,1.); +#10960 = DIRECTION('',(1.,-1.477897042681E-14)); +#10961 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10962 = ADVANCED_FACE('',(#10963),#6522,.F.); +#10963 = FACE_BOUND('',#10964,.F.); +#10964 = EDGE_LOOP('',(#10965,#10988,#10989,#11017)); +#10965 = ORIENTED_EDGE('',*,*,#10966,.F.); +#10966 = EDGE_CURVE('',#6507,#10967,#10969,.T.); +#10967 = VERTEX_POINT('',#10968); +#10968 = CARTESIAN_POINT('',(-2.25,-4.015,0.825)); +#10969 = SURFACE_CURVE('',#10970,(#10974,#10981),.PCURVE_S1.); +#10970 = LINE('',#10971,#10972); +#10971 = CARTESIAN_POINT('',(-1.8,-4.015,0.825)); +#10972 = VECTOR('',#10973,1.); +#10973 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#10974 = PCURVE('',#6522,#10975); +#10975 = DEFINITIONAL_REPRESENTATION('',(#10976),#10980); +#10976 = LINE('',#10977,#10978); +#10977 = CARTESIAN_POINT('',(0.,0.)); +#10978 = VECTOR('',#10979,1.); +#10979 = DIRECTION('',(1.,0.)); +#10980 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10981 = PCURVE('',#10847,#10982); +#10982 = DEFINITIONAL_REPRESENTATION('',(#10983),#10987); +#10983 = LINE('',#10984,#10985); +#10984 = CARTESIAN_POINT('',(0.292340342435,0.61578967201)); +#10985 = VECTOR('',#10986,1.); +#10986 = DIRECTION('',(0.,-1.)); +#10987 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#10988 = ORIENTED_EDGE('',*,*,#6506,.T.); +#10989 = ORIENTED_EDGE('',*,*,#10990,.T.); +#10990 = EDGE_CURVE('',#6479,#10991,#10993,.T.); +#10991 = VERTEX_POINT('',#10992); +#10992 = CARTESIAN_POINT('',(-2.25,-3.605,0.825)); +#10993 = SURFACE_CURVE('',#10994,(#10998,#11005),.PCURVE_S1.); +#10994 = LINE('',#10995,#10996); +#10995 = CARTESIAN_POINT('',(-1.8,-3.605,0.825)); +#10996 = VECTOR('',#10997,1.); +#10997 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#10998 = PCURVE('',#6522,#10999); +#10999 = DEFINITIONAL_REPRESENTATION('',(#11000),#11004); +#11000 = LINE('',#11001,#11002); +#11001 = CARTESIAN_POINT('',(-4.082776925422E-17,-0.41)); +#11002 = VECTOR('',#11003,1.); +#11003 = DIRECTION('',(1.,0.)); +#11004 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11005 = PCURVE('',#11006,#11011); +#11006 = PLANE('',#11007); +#11007 = AXIS2_PLACEMENT_3D('',#11008,#11009,#11010); +#11008 = CARTESIAN_POINT('',(-2.41578967201,-3.605,0.532659657565)); +#11009 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#11010 = DIRECTION('',(0.,0.,1.)); +#11011 = DEFINITIONAL_REPRESENTATION('',(#11012),#11016); +#11012 = LINE('',#11013,#11014); +#11013 = CARTESIAN_POINT('',(0.292340342435,0.61578967201)); +#11014 = VECTOR('',#11015,1.); +#11015 = DIRECTION('',(0.,-1.)); +#11016 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11017 = ORIENTED_EDGE('',*,*,#11018,.F.); +#11018 = EDGE_CURVE('',#10967,#10991,#11019,.T.); +#11019 = SURFACE_CURVE('',#11020,(#11024,#11031),.PCURVE_S1.); +#11020 = LINE('',#11021,#11022); +#11021 = CARTESIAN_POINT('',(-2.25,-4.015,0.825)); +#11022 = VECTOR('',#11023,1.); +#11023 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#11024 = PCURVE('',#6522,#11025); +#11025 = DEFINITIONAL_REPRESENTATION('',(#11026),#11030); +#11026 = LINE('',#11027,#11028); +#11027 = CARTESIAN_POINT('',(0.45,-4.481096625463E-17)); +#11028 = VECTOR('',#11029,1.); +#11029 = DIRECTION('',(0.,-1.)); +#11030 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11031 = PCURVE('',#11032,#11037); +#11032 = CYLINDRICAL_SURFACE('',#11033,0.1); +#11033 = AXIS2_PLACEMENT_3D('',#11034,#11035,#11036); +#11034 = CARTESIAN_POINT('',(-2.25,-4.015,0.725)); +#11035 = DIRECTION('',(9.95799250103E-17,-1.,0.)); +#11036 = DIRECTION('',(-4.440892098501E-15,-4.422237021476E-31,1.)); +#11037 = DEFINITIONAL_REPRESENTATION('',(#11038),#11042); +#11038 = LINE('',#11039,#11040); +#11039 = CARTESIAN_POINT('',(0.,0.)); +#11040 = VECTOR('',#11041,1.); +#11041 = DIRECTION('',(0.,-1.)); +#11042 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11043 = ADVANCED_FACE('',(#11044),#6186,.F.); +#11044 = FACE_BOUND('',#11045,.F.); +#11045 = EDGE_LOOP('',(#11046,#11074,#11075,#11098)); +#11046 = ORIENTED_EDGE('',*,*,#11047,.F.); +#11047 = EDGE_CURVE('',#6171,#11048,#11050,.T.); +#11048 = VERTEX_POINT('',#11049); +#11049 = CARTESIAN_POINT('',(-2.25,3.605,0.825)); +#11050 = SURFACE_CURVE('',#11051,(#11055,#11062),.PCURVE_S1.); +#11051 = LINE('',#11052,#11053); +#11052 = CARTESIAN_POINT('',(-1.8,3.605,0.825)); +#11053 = VECTOR('',#11054,1.); +#11054 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#11055 = PCURVE('',#6186,#11056); +#11056 = DEFINITIONAL_REPRESENTATION('',(#11057),#11061); +#11057 = LINE('',#11058,#11059); +#11058 = CARTESIAN_POINT('',(0.,0.)); +#11059 = VECTOR('',#11060,1.); +#11060 = DIRECTION('',(1.,0.)); +#11061 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11062 = PCURVE('',#11063,#11068); +#11063 = PLANE('',#11064); +#11064 = AXIS2_PLACEMENT_3D('',#11065,#11066,#11067); +#11065 = CARTESIAN_POINT('',(-2.41578967201,3.605,0.532659657565)); +#11066 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#11067 = DIRECTION('',(0.,0.,1.)); +#11068 = DEFINITIONAL_REPRESENTATION('',(#11069),#11073); +#11069 = LINE('',#11070,#11071); +#11070 = CARTESIAN_POINT('',(0.292340342435,0.61578967201)); +#11071 = VECTOR('',#11072,1.); +#11072 = DIRECTION('',(0.,-1.)); +#11073 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11074 = ORIENTED_EDGE('',*,*,#6170,.T.); +#11075 = ORIENTED_EDGE('',*,*,#11076,.T.); +#11076 = EDGE_CURVE('',#6143,#11077,#11079,.T.); +#11077 = VERTEX_POINT('',#11078); +#11078 = CARTESIAN_POINT('',(-2.25,4.015,0.825)); +#11079 = SURFACE_CURVE('',#11080,(#11084,#11091),.PCURVE_S1.); +#11080 = LINE('',#11081,#11082); +#11081 = CARTESIAN_POINT('',(-1.8,4.015,0.825)); +#11082 = VECTOR('',#11083,1.); +#11083 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#11084 = PCURVE('',#6186,#11085); +#11085 = DEFINITIONAL_REPRESENTATION('',(#11086),#11090); +#11086 = LINE('',#11087,#11088); +#11087 = CARTESIAN_POINT('',(-4.082776925422E-17,-0.41)); +#11088 = VECTOR('',#11089,1.); +#11089 = DIRECTION('',(1.,0.)); +#11090 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11091 = PCURVE('',#10904,#11092); +#11092 = DEFINITIONAL_REPRESENTATION('',(#11093),#11097); +#11093 = LINE('',#11094,#11095); +#11094 = CARTESIAN_POINT('',(0.292340342435,0.61578967201)); +#11095 = VECTOR('',#11096,1.); +#11096 = DIRECTION('',(0.,-1.)); +#11097 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11098 = ORIENTED_EDGE('',*,*,#11099,.F.); +#11099 = EDGE_CURVE('',#11048,#11077,#11100,.T.); +#11100 = SURFACE_CURVE('',#11101,(#11105,#11112),.PCURVE_S1.); +#11101 = LINE('',#11102,#11103); +#11102 = CARTESIAN_POINT('',(-2.25,3.605,0.825)); +#11103 = VECTOR('',#11104,1.); +#11104 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#11105 = PCURVE('',#6186,#11106); +#11106 = DEFINITIONAL_REPRESENTATION('',(#11107),#11111); +#11107 = LINE('',#11108,#11109); +#11108 = CARTESIAN_POINT('',(0.45,-4.481096625463E-17)); +#11109 = VECTOR('',#11110,1.); +#11110 = DIRECTION('',(0.,-1.)); +#11111 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11112 = PCURVE('',#11113,#11118); +#11113 = CYLINDRICAL_SURFACE('',#11114,0.1); +#11114 = AXIS2_PLACEMENT_3D('',#11115,#11116,#11117); +#11115 = CARTESIAN_POINT('',(-2.25,3.605,0.725)); +#11116 = DIRECTION('',(9.95799250103E-17,-1.,0.)); +#11117 = DIRECTION('',(-4.440892098501E-15,-4.422237021476E-31,1.)); +#11118 = DEFINITIONAL_REPRESENTATION('',(#11119),#11123); +#11119 = LINE('',#11120,#11121); +#11120 = CARTESIAN_POINT('',(0.,0.)); +#11121 = VECTOR('',#11122,1.); +#11122 = DIRECTION('',(0.,-1.)); +#11123 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11124 = ADVANCED_FACE('',(#11125),#6494,.F.); +#11125 = FACE_BOUND('',#11126,.F.); +#11126 = EDGE_LOOP('',(#11127,#11150,#11151,#11179)); +#11127 = ORIENTED_EDGE('',*,*,#11128,.F.); +#11128 = EDGE_CURVE('',#6479,#11129,#11131,.T.); +#11129 = VERTEX_POINT('',#11130); +#11130 = CARTESIAN_POINT('',(-1.95,-3.605,1.025)); +#11131 = SURFACE_CURVE('',#11132,(#11136,#11143),.PCURVE_S1.); +#11132 = LINE('',#11133,#11134); +#11133 = CARTESIAN_POINT('',(-1.95,-3.605,0.778829828783)); +#11134 = VECTOR('',#11135,1.); +#11135 = DIRECTION('',(0.,0.,1.)); +#11136 = PCURVE('',#6494,#11137); +#11137 = DEFINITIONAL_REPRESENTATION('',(#11138),#11142); +#11138 = LINE('',#11139,#11140); +#11139 = CARTESIAN_POINT('',(0.57,-0.246170171217)); +#11140 = VECTOR('',#11141,1.); +#11141 = DIRECTION('',(0.,1.)); +#11142 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11143 = PCURVE('',#11006,#11144); +#11144 = DEFINITIONAL_REPRESENTATION('',(#11145),#11149); +#11145 = LINE('',#11146,#11147); +#11146 = CARTESIAN_POINT('',(0.246170171218,0.46578967201)); +#11147 = VECTOR('',#11148,1.); +#11148 = DIRECTION('',(1.,0.)); +#11149 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11150 = ORIENTED_EDGE('',*,*,#6478,.T.); +#11151 = ORIENTED_EDGE('',*,*,#11152,.T.); +#11152 = EDGE_CURVE('',#6451,#11153,#11155,.T.); +#11153 = VERTEX_POINT('',#11154); +#11154 = CARTESIAN_POINT('',(-1.95,-2.745,1.025)); +#11155 = SURFACE_CURVE('',#11156,(#11160,#11167),.PCURVE_S1.); +#11156 = LINE('',#11157,#11158); +#11157 = CARTESIAN_POINT('',(-1.95,-2.745,0.778829828783)); +#11158 = VECTOR('',#11159,1.); +#11159 = DIRECTION('',(0.,0.,1.)); +#11160 = PCURVE('',#6494,#11161); +#11161 = DEFINITIONAL_REPRESENTATION('',(#11162),#11166); +#11162 = LINE('',#11163,#11164); +#11163 = CARTESIAN_POINT('',(1.43,-0.246170171217)); +#11164 = VECTOR('',#11165,1.); +#11165 = DIRECTION('',(0.,1.)); +#11166 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11167 = PCURVE('',#11168,#11173); +#11168 = PLANE('',#11169); +#11169 = AXIS2_PLACEMENT_3D('',#11170,#11171,#11172); +#11170 = CARTESIAN_POINT('',(-2.41578967201,-2.745,0.532659657565)); +#11171 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#11172 = DIRECTION('',(0.,0.,1.)); +#11173 = DEFINITIONAL_REPRESENTATION('',(#11174),#11178); +#11174 = LINE('',#11175,#11176); +#11175 = CARTESIAN_POINT('',(0.246170171218,0.46578967201)); +#11176 = VECTOR('',#11177,1.); +#11177 = DIRECTION('',(1.,0.)); +#11178 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11179 = ORIENTED_EDGE('',*,*,#11180,.F.); +#11180 = EDGE_CURVE('',#11129,#11153,#11181,.T.); +#11181 = SURFACE_CURVE('',#11182,(#11186,#11193),.PCURVE_S1.); +#11182 = LINE('',#11183,#11184); +#11183 = CARTESIAN_POINT('',(-1.95,-4.175,1.025)); +#11184 = VECTOR('',#11185,1.); +#11185 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#11186 = PCURVE('',#6494,#11187); +#11187 = DEFINITIONAL_REPRESENTATION('',(#11188),#11192); +#11188 = LINE('',#11189,#11190); +#11189 = CARTESIAN_POINT('',(0.,0.)); +#11190 = VECTOR('',#11191,1.); +#11191 = DIRECTION('',(1.,0.)); +#11192 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11193 = PCURVE('',#11194,#11199); +#11194 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#11195,#11196) + ,(#11197,#11198 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,8.35),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#11195 = CARTESIAN_POINT('',(-1.95,-4.175,1.025)); +#11196 = CARTESIAN_POINT('',(-1.875,-4.1375,1.025)); +#11197 = CARTESIAN_POINT('',(-1.95,4.175,1.025)); +#11198 = CARTESIAN_POINT('',(-1.875,4.1375,1.025)); +#11199 = DEFINITIONAL_REPRESENTATION('',(#11200),#11204); +#11200 = LINE('',#11201,#11202); +#11201 = CARTESIAN_POINT('',(2.22044604925E-16,-3.068881473967E-15)); +#11202 = VECTOR('',#11203,1.); +#11203 = DIRECTION('',(1.,1.789223446528E-15)); +#11204 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11205 = ADVANCED_FACE('',(#11206),#6214,.F.); +#11206 = FACE_BOUND('',#11207,.F.); +#11207 = EDGE_LOOP('',(#11208,#11236,#11237,#11260)); +#11208 = ORIENTED_EDGE('',*,*,#11209,.F.); +#11209 = EDGE_CURVE('',#6199,#11210,#11212,.T.); +#11210 = VERTEX_POINT('',#11211); +#11211 = CARTESIAN_POINT('',(-1.95,2.745,1.025)); +#11212 = SURFACE_CURVE('',#11213,(#11217,#11224),.PCURVE_S1.); +#11213 = LINE('',#11214,#11215); +#11214 = CARTESIAN_POINT('',(-1.95,2.745,0.778829828783)); +#11215 = VECTOR('',#11216,1.); +#11216 = DIRECTION('',(0.,0.,1.)); +#11217 = PCURVE('',#6214,#11218); +#11218 = DEFINITIONAL_REPRESENTATION('',(#11219),#11223); +#11219 = LINE('',#11220,#11221); +#11220 = CARTESIAN_POINT('',(6.92,-0.246170171217)); +#11221 = VECTOR('',#11222,1.); +#11222 = DIRECTION('',(0.,1.)); +#11223 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11224 = PCURVE('',#11225,#11230); +#11225 = PLANE('',#11226); +#11226 = AXIS2_PLACEMENT_3D('',#11227,#11228,#11229); +#11227 = CARTESIAN_POINT('',(-2.41578967201,2.745,0.532659657565)); +#11228 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#11229 = DIRECTION('',(0.,0.,1.)); +#11230 = DEFINITIONAL_REPRESENTATION('',(#11231),#11235); +#11231 = LINE('',#11232,#11233); +#11232 = CARTESIAN_POINT('',(0.246170171218,0.46578967201)); +#11233 = VECTOR('',#11234,1.); +#11234 = DIRECTION('',(1.,0.)); +#11235 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11236 = ORIENTED_EDGE('',*,*,#6198,.T.); +#11237 = ORIENTED_EDGE('',*,*,#11238,.T.); +#11238 = EDGE_CURVE('',#6171,#11239,#11241,.T.); +#11239 = VERTEX_POINT('',#11240); +#11240 = CARTESIAN_POINT('',(-1.95,3.605,1.025)); +#11241 = SURFACE_CURVE('',#11242,(#11246,#11253),.PCURVE_S1.); +#11242 = LINE('',#11243,#11244); +#11243 = CARTESIAN_POINT('',(-1.95,3.605,0.778829828783)); +#11244 = VECTOR('',#11245,1.); +#11245 = DIRECTION('',(0.,0.,1.)); +#11246 = PCURVE('',#6214,#11247); +#11247 = DEFINITIONAL_REPRESENTATION('',(#11248),#11252); +#11248 = LINE('',#11249,#11250); +#11249 = CARTESIAN_POINT('',(7.78,-0.246170171217)); +#11250 = VECTOR('',#11251,1.); +#11251 = DIRECTION('',(0.,1.)); +#11252 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11253 = PCURVE('',#11063,#11254); +#11254 = DEFINITIONAL_REPRESENTATION('',(#11255),#11259); +#11255 = LINE('',#11256,#11257); +#11256 = CARTESIAN_POINT('',(0.246170171218,0.46578967201)); +#11257 = VECTOR('',#11258,1.); +#11258 = DIRECTION('',(1.,0.)); +#11259 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11260 = ORIENTED_EDGE('',*,*,#11261,.F.); +#11261 = EDGE_CURVE('',#11210,#11239,#11262,.T.); +#11262 = SURFACE_CURVE('',#11263,(#11267,#11274),.PCURVE_S1.); +#11263 = LINE('',#11264,#11265); +#11264 = CARTESIAN_POINT('',(-1.95,-4.175,1.025)); +#11265 = VECTOR('',#11266,1.); +#11266 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#11267 = PCURVE('',#6214,#11268); +#11268 = DEFINITIONAL_REPRESENTATION('',(#11269),#11273); +#11269 = LINE('',#11270,#11271); +#11270 = CARTESIAN_POINT('',(0.,0.)); +#11271 = VECTOR('',#11272,1.); +#11272 = DIRECTION('',(1.,0.)); +#11273 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11274 = PCURVE('',#11275,#11280); +#11275 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#11276,#11277) + ,(#11278,#11279 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,8.35),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#11276 = CARTESIAN_POINT('',(-1.95,-4.175,1.025)); +#11277 = CARTESIAN_POINT('',(-1.875,-4.1375,1.025)); +#11278 = CARTESIAN_POINT('',(-1.95,4.175,1.025)); +#11279 = CARTESIAN_POINT('',(-1.875,4.1375,1.025)); +#11280 = DEFINITIONAL_REPRESENTATION('',(#11281),#11285); +#11281 = LINE('',#11282,#11283); +#11282 = CARTESIAN_POINT('',(0.,4.176875635101E-14)); +#11283 = VECTOR('',#11284,1.); +#11284 = DIRECTION('',(1.,-8.67634447324E-15)); +#11285 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11286 = ADVANCED_FACE('',(#11287),#6466,.F.); +#11287 = FACE_BOUND('',#11288,.F.); +#11288 = EDGE_LOOP('',(#11289,#11312,#11313,#11341)); +#11289 = ORIENTED_EDGE('',*,*,#11290,.F.); +#11290 = EDGE_CURVE('',#6451,#11291,#11293,.T.); +#11291 = VERTEX_POINT('',#11292); +#11292 = CARTESIAN_POINT('',(-2.25,-2.745,0.825)); +#11293 = SURFACE_CURVE('',#11294,(#11298,#11305),.PCURVE_S1.); +#11294 = LINE('',#11295,#11296); +#11295 = CARTESIAN_POINT('',(-1.8,-2.745,0.825)); +#11296 = VECTOR('',#11297,1.); +#11297 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#11298 = PCURVE('',#6466,#11299); +#11299 = DEFINITIONAL_REPRESENTATION('',(#11300),#11304); +#11300 = LINE('',#11301,#11302); +#11301 = CARTESIAN_POINT('',(0.,0.)); +#11302 = VECTOR('',#11303,1.); +#11303 = DIRECTION('',(1.,0.)); +#11304 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11305 = PCURVE('',#11168,#11306); +#11306 = DEFINITIONAL_REPRESENTATION('',(#11307),#11311); +#11307 = LINE('',#11308,#11309); +#11308 = CARTESIAN_POINT('',(0.292340342435,0.61578967201)); +#11309 = VECTOR('',#11310,1.); +#11310 = DIRECTION('',(0.,-1.)); +#11311 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11312 = ORIENTED_EDGE('',*,*,#6450,.T.); +#11313 = ORIENTED_EDGE('',*,*,#11314,.T.); +#11314 = EDGE_CURVE('',#6423,#11315,#11317,.T.); +#11315 = VERTEX_POINT('',#11316); +#11316 = CARTESIAN_POINT('',(-2.25,-2.335,0.825)); +#11317 = SURFACE_CURVE('',#11318,(#11322,#11329),.PCURVE_S1.); +#11318 = LINE('',#11319,#11320); +#11319 = CARTESIAN_POINT('',(-1.8,-2.335,0.825)); +#11320 = VECTOR('',#11321,1.); +#11321 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#11322 = PCURVE('',#6466,#11323); +#11323 = DEFINITIONAL_REPRESENTATION('',(#11324),#11328); +#11324 = LINE('',#11325,#11326); +#11325 = CARTESIAN_POINT('',(-4.082776925422E-17,-0.41)); +#11326 = VECTOR('',#11327,1.); +#11327 = DIRECTION('',(1.,0.)); +#11328 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11329 = PCURVE('',#11330,#11335); +#11330 = PLANE('',#11331); +#11331 = AXIS2_PLACEMENT_3D('',#11332,#11333,#11334); +#11332 = CARTESIAN_POINT('',(-2.41578967201,-2.335,0.532659657565)); +#11333 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#11334 = DIRECTION('',(0.,0.,1.)); +#11335 = DEFINITIONAL_REPRESENTATION('',(#11336),#11340); +#11336 = LINE('',#11337,#11338); +#11337 = CARTESIAN_POINT('',(0.292340342435,0.61578967201)); +#11338 = VECTOR('',#11339,1.); +#11339 = DIRECTION('',(0.,-1.)); +#11340 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11341 = ORIENTED_EDGE('',*,*,#11342,.F.); +#11342 = EDGE_CURVE('',#11291,#11315,#11343,.T.); +#11343 = SURFACE_CURVE('',#11344,(#11348,#11355),.PCURVE_S1.); +#11344 = LINE('',#11345,#11346); +#11345 = CARTESIAN_POINT('',(-2.25,-2.745,0.825)); +#11346 = VECTOR('',#11347,1.); +#11347 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#11348 = PCURVE('',#6466,#11349); +#11349 = DEFINITIONAL_REPRESENTATION('',(#11350),#11354); +#11350 = LINE('',#11351,#11352); +#11351 = CARTESIAN_POINT('',(0.45,-4.481096625463E-17)); +#11352 = VECTOR('',#11353,1.); +#11353 = DIRECTION('',(0.,-1.)); +#11354 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11355 = PCURVE('',#11356,#11361); +#11356 = CYLINDRICAL_SURFACE('',#11357,0.1); +#11357 = AXIS2_PLACEMENT_3D('',#11358,#11359,#11360); +#11358 = CARTESIAN_POINT('',(-2.25,-2.745,0.725)); +#11359 = DIRECTION('',(9.95799250103E-17,-1.,0.)); +#11360 = DIRECTION('',(-4.440892098501E-15,-4.422237021476E-31,1.)); +#11361 = DEFINITIONAL_REPRESENTATION('',(#11362),#11366); +#11362 = LINE('',#11363,#11364); +#11363 = CARTESIAN_POINT('',(0.,0.)); +#11364 = VECTOR('',#11365,1.); +#11365 = DIRECTION('',(0.,-1.)); +#11366 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11367 = ADVANCED_FACE('',(#11368),#6242,.F.); +#11368 = FACE_BOUND('',#11369,.F.); +#11369 = EDGE_LOOP('',(#11370,#11398,#11399,#11422)); +#11370 = ORIENTED_EDGE('',*,*,#11371,.F.); +#11371 = EDGE_CURVE('',#6227,#11372,#11374,.T.); +#11372 = VERTEX_POINT('',#11373); +#11373 = CARTESIAN_POINT('',(-2.25,2.335,0.825)); +#11374 = SURFACE_CURVE('',#11375,(#11379,#11386),.PCURVE_S1.); +#11375 = LINE('',#11376,#11377); +#11376 = CARTESIAN_POINT('',(-1.8,2.335,0.825)); +#11377 = VECTOR('',#11378,1.); +#11378 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#11379 = PCURVE('',#6242,#11380); +#11380 = DEFINITIONAL_REPRESENTATION('',(#11381),#11385); +#11381 = LINE('',#11382,#11383); +#11382 = CARTESIAN_POINT('',(0.,0.)); +#11383 = VECTOR('',#11384,1.); +#11384 = DIRECTION('',(1.,0.)); +#11385 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11386 = PCURVE('',#11387,#11392); +#11387 = PLANE('',#11388); +#11388 = AXIS2_PLACEMENT_3D('',#11389,#11390,#11391); +#11389 = CARTESIAN_POINT('',(-2.41578967201,2.335,0.532659657565)); +#11390 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#11391 = DIRECTION('',(0.,0.,1.)); +#11392 = DEFINITIONAL_REPRESENTATION('',(#11393),#11397); +#11393 = LINE('',#11394,#11395); +#11394 = CARTESIAN_POINT('',(0.292340342435,0.61578967201)); +#11395 = VECTOR('',#11396,1.); +#11396 = DIRECTION('',(0.,-1.)); +#11397 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11398 = ORIENTED_EDGE('',*,*,#6226,.T.); +#11399 = ORIENTED_EDGE('',*,*,#11400,.T.); +#11400 = EDGE_CURVE('',#6199,#11401,#11403,.T.); +#11401 = VERTEX_POINT('',#11402); +#11402 = CARTESIAN_POINT('',(-2.25,2.745,0.825)); +#11403 = SURFACE_CURVE('',#11404,(#11408,#11415),.PCURVE_S1.); +#11404 = LINE('',#11405,#11406); +#11405 = CARTESIAN_POINT('',(-1.8,2.745,0.825)); +#11406 = VECTOR('',#11407,1.); +#11407 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#11408 = PCURVE('',#6242,#11409); +#11409 = DEFINITIONAL_REPRESENTATION('',(#11410),#11414); +#11410 = LINE('',#11411,#11412); +#11411 = CARTESIAN_POINT('',(-4.082776925422E-17,-0.41)); +#11412 = VECTOR('',#11413,1.); +#11413 = DIRECTION('',(1.,0.)); +#11414 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11415 = PCURVE('',#11225,#11416); +#11416 = DEFINITIONAL_REPRESENTATION('',(#11417),#11421); +#11417 = LINE('',#11418,#11419); +#11418 = CARTESIAN_POINT('',(0.292340342435,0.61578967201)); +#11419 = VECTOR('',#11420,1.); +#11420 = DIRECTION('',(0.,-1.)); +#11421 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11422 = ORIENTED_EDGE('',*,*,#11423,.F.); +#11423 = EDGE_CURVE('',#11372,#11401,#11424,.T.); +#11424 = SURFACE_CURVE('',#11425,(#11429,#11436),.PCURVE_S1.); +#11425 = LINE('',#11426,#11427); +#11426 = CARTESIAN_POINT('',(-2.25,2.335,0.825)); +#11427 = VECTOR('',#11428,1.); +#11428 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#11429 = PCURVE('',#6242,#11430); +#11430 = DEFINITIONAL_REPRESENTATION('',(#11431),#11435); +#11431 = LINE('',#11432,#11433); +#11432 = CARTESIAN_POINT('',(0.45,-4.481096625463E-17)); +#11433 = VECTOR('',#11434,1.); +#11434 = DIRECTION('',(0.,-1.)); +#11435 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11436 = PCURVE('',#11437,#11442); +#11437 = CYLINDRICAL_SURFACE('',#11438,0.1); +#11438 = AXIS2_PLACEMENT_3D('',#11439,#11440,#11441); +#11439 = CARTESIAN_POINT('',(-2.25,2.335,0.725)); +#11440 = DIRECTION('',(9.95799250103E-17,-1.,0.)); +#11441 = DIRECTION('',(-4.440892098501E-15,-4.422237021476E-31,1.)); +#11442 = DEFINITIONAL_REPRESENTATION('',(#11443),#11447); +#11443 = LINE('',#11444,#11445); +#11444 = CARTESIAN_POINT('',(0.,0.)); +#11445 = VECTOR('',#11446,1.); +#11446 = DIRECTION('',(0.,-1.)); +#11447 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11448 = ADVANCED_FACE('',(#11449),#6438,.F.); +#11449 = FACE_BOUND('',#11450,.F.); +#11450 = EDGE_LOOP('',(#11451,#11474,#11475,#11503)); +#11451 = ORIENTED_EDGE('',*,*,#11452,.F.); +#11452 = EDGE_CURVE('',#6423,#11453,#11455,.T.); +#11453 = VERTEX_POINT('',#11454); +#11454 = CARTESIAN_POINT('',(-1.95,-2.335,1.025)); +#11455 = SURFACE_CURVE('',#11456,(#11460,#11467),.PCURVE_S1.); +#11456 = LINE('',#11457,#11458); +#11457 = CARTESIAN_POINT('',(-1.95,-2.335,0.778829828783)); +#11458 = VECTOR('',#11459,1.); +#11459 = DIRECTION('',(0.,0.,1.)); +#11460 = PCURVE('',#6438,#11461); +#11461 = DEFINITIONAL_REPRESENTATION('',(#11462),#11466); +#11462 = LINE('',#11463,#11464); +#11463 = CARTESIAN_POINT('',(1.84,-0.246170171217)); +#11464 = VECTOR('',#11465,1.); +#11465 = DIRECTION('',(0.,1.)); +#11466 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11467 = PCURVE('',#11330,#11468); +#11468 = DEFINITIONAL_REPRESENTATION('',(#11469),#11473); +#11469 = LINE('',#11470,#11471); +#11470 = CARTESIAN_POINT('',(0.246170171218,0.46578967201)); +#11471 = VECTOR('',#11472,1.); +#11472 = DIRECTION('',(1.,0.)); +#11473 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11474 = ORIENTED_EDGE('',*,*,#6422,.T.); +#11475 = ORIENTED_EDGE('',*,*,#11476,.T.); +#11476 = EDGE_CURVE('',#6395,#11477,#11479,.T.); +#11477 = VERTEX_POINT('',#11478); +#11478 = CARTESIAN_POINT('',(-1.95,-1.475,1.025)); +#11479 = SURFACE_CURVE('',#11480,(#11484,#11491),.PCURVE_S1.); +#11480 = LINE('',#11481,#11482); +#11481 = CARTESIAN_POINT('',(-1.95,-1.475,0.778829828783)); +#11482 = VECTOR('',#11483,1.); +#11483 = DIRECTION('',(0.,0.,1.)); +#11484 = PCURVE('',#6438,#11485); +#11485 = DEFINITIONAL_REPRESENTATION('',(#11486),#11490); +#11486 = LINE('',#11487,#11488); +#11487 = CARTESIAN_POINT('',(2.7,-0.246170171217)); +#11488 = VECTOR('',#11489,1.); +#11489 = DIRECTION('',(0.,1.)); +#11490 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11491 = PCURVE('',#11492,#11497); +#11492 = PLANE('',#11493); +#11493 = AXIS2_PLACEMENT_3D('',#11494,#11495,#11496); +#11494 = CARTESIAN_POINT('',(-2.41578967201,-1.475,0.532659657565)); +#11495 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#11496 = DIRECTION('',(0.,0.,1.)); +#11497 = DEFINITIONAL_REPRESENTATION('',(#11498),#11502); +#11498 = LINE('',#11499,#11500); +#11499 = CARTESIAN_POINT('',(0.246170171218,0.46578967201)); +#11500 = VECTOR('',#11501,1.); +#11501 = DIRECTION('',(1.,0.)); +#11502 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11503 = ORIENTED_EDGE('',*,*,#11504,.F.); +#11504 = EDGE_CURVE('',#11453,#11477,#11505,.T.); +#11505 = SURFACE_CURVE('',#11506,(#11510,#11517),.PCURVE_S1.); +#11506 = LINE('',#11507,#11508); +#11507 = CARTESIAN_POINT('',(-1.95,-4.175,1.025)); +#11508 = VECTOR('',#11509,1.); +#11509 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#11510 = PCURVE('',#6438,#11511); +#11511 = DEFINITIONAL_REPRESENTATION('',(#11512),#11516); +#11512 = LINE('',#11513,#11514); +#11513 = CARTESIAN_POINT('',(0.,0.)); +#11514 = VECTOR('',#11515,1.); +#11515 = DIRECTION('',(1.,0.)); +#11516 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11517 = PCURVE('',#11518,#11523); +#11518 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#11519,#11520) + ,(#11521,#11522 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,8.35),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#11519 = CARTESIAN_POINT('',(-1.95,-4.175,1.025)); +#11520 = CARTESIAN_POINT('',(-1.875,-4.1375,1.025)); +#11521 = CARTESIAN_POINT('',(-1.95,4.175,1.025)); +#11522 = CARTESIAN_POINT('',(-1.875,4.1375,1.025)); +#11523 = DEFINITIONAL_REPRESENTATION('',(#11524),#11528); +#11524 = LINE('',#11525,#11526); +#11525 = CARTESIAN_POINT('',(0.,-2.63248575826E-15)); +#11526 = VECTOR('',#11527,1.); +#11527 = DIRECTION('',(1.,-1.680960070664E-15)); +#11528 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11529 = ADVANCED_FACE('',(#11530),#6270,.F.); +#11530 = FACE_BOUND('',#11531,.F.); +#11531 = EDGE_LOOP('',(#11532,#11560,#11561,#11584)); +#11532 = ORIENTED_EDGE('',*,*,#11533,.F.); +#11533 = EDGE_CURVE('',#6255,#11534,#11536,.T.); +#11534 = VERTEX_POINT('',#11535); +#11535 = CARTESIAN_POINT('',(-1.95,1.475,1.025)); +#11536 = SURFACE_CURVE('',#11537,(#11541,#11548),.PCURVE_S1.); +#11537 = LINE('',#11538,#11539); +#11538 = CARTESIAN_POINT('',(-1.95,1.475,0.778829828783)); +#11539 = VECTOR('',#11540,1.); +#11540 = DIRECTION('',(0.,0.,1.)); +#11541 = PCURVE('',#6270,#11542); +#11542 = DEFINITIONAL_REPRESENTATION('',(#11543),#11547); +#11543 = LINE('',#11544,#11545); +#11544 = CARTESIAN_POINT('',(5.65,-0.246170171217)); +#11545 = VECTOR('',#11546,1.); +#11546 = DIRECTION('',(0.,1.)); +#11547 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11548 = PCURVE('',#11549,#11554); +#11549 = PLANE('',#11550); +#11550 = AXIS2_PLACEMENT_3D('',#11551,#11552,#11553); +#11551 = CARTESIAN_POINT('',(-2.41578967201,1.475,0.532659657565)); +#11552 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#11553 = DIRECTION('',(0.,0.,1.)); +#11554 = DEFINITIONAL_REPRESENTATION('',(#11555),#11559); +#11555 = LINE('',#11556,#11557); +#11556 = CARTESIAN_POINT('',(0.246170171218,0.46578967201)); +#11557 = VECTOR('',#11558,1.); +#11558 = DIRECTION('',(1.,0.)); +#11559 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11560 = ORIENTED_EDGE('',*,*,#6254,.T.); +#11561 = ORIENTED_EDGE('',*,*,#11562,.T.); +#11562 = EDGE_CURVE('',#6227,#11563,#11565,.T.); +#11563 = VERTEX_POINT('',#11564); +#11564 = CARTESIAN_POINT('',(-1.95,2.335,1.025)); +#11565 = SURFACE_CURVE('',#11566,(#11570,#11577),.PCURVE_S1.); +#11566 = LINE('',#11567,#11568); +#11567 = CARTESIAN_POINT('',(-1.95,2.335,0.778829828783)); +#11568 = VECTOR('',#11569,1.); +#11569 = DIRECTION('',(0.,0.,1.)); +#11570 = PCURVE('',#6270,#11571); +#11571 = DEFINITIONAL_REPRESENTATION('',(#11572),#11576); +#11572 = LINE('',#11573,#11574); +#11573 = CARTESIAN_POINT('',(6.51,-0.246170171217)); +#11574 = VECTOR('',#11575,1.); +#11575 = DIRECTION('',(0.,1.)); +#11576 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11577 = PCURVE('',#11387,#11578); +#11578 = DEFINITIONAL_REPRESENTATION('',(#11579),#11583); +#11579 = LINE('',#11580,#11581); +#11580 = CARTESIAN_POINT('',(0.246170171218,0.46578967201)); +#11581 = VECTOR('',#11582,1.); +#11582 = DIRECTION('',(1.,0.)); +#11583 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11584 = ORIENTED_EDGE('',*,*,#11585,.F.); +#11585 = EDGE_CURVE('',#11534,#11563,#11586,.T.); +#11586 = SURFACE_CURVE('',#11587,(#11591,#11598),.PCURVE_S1.); +#11587 = LINE('',#11588,#11589); +#11588 = CARTESIAN_POINT('',(-1.95,-4.175,1.025)); +#11589 = VECTOR('',#11590,1.); +#11590 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#11591 = PCURVE('',#6270,#11592); +#11592 = DEFINITIONAL_REPRESENTATION('',(#11593),#11597); +#11593 = LINE('',#11594,#11595); +#11594 = CARTESIAN_POINT('',(0.,0.)); +#11595 = VECTOR('',#11596,1.); +#11596 = DIRECTION('',(1.,0.)); +#11597 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11598 = PCURVE('',#11599,#11604); +#11599 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#11600,#11601) + ,(#11602,#11603 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,8.35),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#11600 = CARTESIAN_POINT('',(-1.95,-4.175,1.025)); +#11601 = CARTESIAN_POINT('',(-1.875,-4.1375,1.025)); +#11602 = CARTESIAN_POINT('',(-1.95,4.175,1.025)); +#11603 = CARTESIAN_POINT('',(-1.875,4.1375,1.025)); +#11604 = DEFINITIONAL_REPRESENTATION('',(#11605),#11609); +#11605 = LINE('',#11606,#11607); +#11606 = CARTESIAN_POINT('',(0.,1.334468818682E-14)); +#11607 = VECTOR('',#11608,1.); +#11608 = DIRECTION('',(1.,-5.202799219453E-15)); +#11609 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11610 = ADVANCED_FACE('',(#11611),#6410,.F.); +#11611 = FACE_BOUND('',#11612,.F.); +#11612 = EDGE_LOOP('',(#11613,#11636,#11637,#11665)); +#11613 = ORIENTED_EDGE('',*,*,#11614,.F.); +#11614 = EDGE_CURVE('',#6395,#11615,#11617,.T.); +#11615 = VERTEX_POINT('',#11616); +#11616 = CARTESIAN_POINT('',(-2.25,-1.475,0.825)); +#11617 = SURFACE_CURVE('',#11618,(#11622,#11629),.PCURVE_S1.); +#11618 = LINE('',#11619,#11620); +#11619 = CARTESIAN_POINT('',(-1.8,-1.475,0.825)); +#11620 = VECTOR('',#11621,1.); +#11621 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#11622 = PCURVE('',#6410,#11623); +#11623 = DEFINITIONAL_REPRESENTATION('',(#11624),#11628); +#11624 = LINE('',#11625,#11626); +#11625 = CARTESIAN_POINT('',(0.,0.)); +#11626 = VECTOR('',#11627,1.); +#11627 = DIRECTION('',(1.,0.)); +#11628 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11629 = PCURVE('',#11492,#11630); +#11630 = DEFINITIONAL_REPRESENTATION('',(#11631),#11635); +#11631 = LINE('',#11632,#11633); +#11632 = CARTESIAN_POINT('',(0.292340342435,0.61578967201)); +#11633 = VECTOR('',#11634,1.); +#11634 = DIRECTION('',(0.,-1.)); +#11635 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11636 = ORIENTED_EDGE('',*,*,#6394,.T.); +#11637 = ORIENTED_EDGE('',*,*,#11638,.T.); +#11638 = EDGE_CURVE('',#6367,#11639,#11641,.T.); +#11639 = VERTEX_POINT('',#11640); +#11640 = CARTESIAN_POINT('',(-2.25,-1.065,0.825)); +#11641 = SURFACE_CURVE('',#11642,(#11646,#11653),.PCURVE_S1.); +#11642 = LINE('',#11643,#11644); +#11643 = CARTESIAN_POINT('',(-1.8,-1.065,0.825)); +#11644 = VECTOR('',#11645,1.); +#11645 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#11646 = PCURVE('',#6410,#11647); +#11647 = DEFINITIONAL_REPRESENTATION('',(#11648),#11652); +#11648 = LINE('',#11649,#11650); +#11649 = CARTESIAN_POINT('',(-4.082776925422E-17,-0.41)); +#11650 = VECTOR('',#11651,1.); +#11651 = DIRECTION('',(1.,0.)); +#11652 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11653 = PCURVE('',#11654,#11659); +#11654 = PLANE('',#11655); +#11655 = AXIS2_PLACEMENT_3D('',#11656,#11657,#11658); +#11656 = CARTESIAN_POINT('',(-2.41578967201,-1.065,0.532659657565)); +#11657 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#11658 = DIRECTION('',(0.,0.,1.)); +#11659 = DEFINITIONAL_REPRESENTATION('',(#11660),#11664); +#11660 = LINE('',#11661,#11662); +#11661 = CARTESIAN_POINT('',(0.292340342435,0.61578967201)); +#11662 = VECTOR('',#11663,1.); +#11663 = DIRECTION('',(0.,-1.)); +#11664 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11665 = ORIENTED_EDGE('',*,*,#11666,.F.); +#11666 = EDGE_CURVE('',#11615,#11639,#11667,.T.); +#11667 = SURFACE_CURVE('',#11668,(#11672,#11679),.PCURVE_S1.); +#11668 = LINE('',#11669,#11670); +#11669 = CARTESIAN_POINT('',(-2.25,-1.475,0.825)); +#11670 = VECTOR('',#11671,1.); +#11671 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#11672 = PCURVE('',#6410,#11673); +#11673 = DEFINITIONAL_REPRESENTATION('',(#11674),#11678); +#11674 = LINE('',#11675,#11676); +#11675 = CARTESIAN_POINT('',(0.45,-4.481096625463E-17)); +#11676 = VECTOR('',#11677,1.); +#11677 = DIRECTION('',(0.,-1.)); +#11678 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11679 = PCURVE('',#11680,#11685); +#11680 = CYLINDRICAL_SURFACE('',#11681,0.1); +#11681 = AXIS2_PLACEMENT_3D('',#11682,#11683,#11684); +#11682 = CARTESIAN_POINT('',(-2.25,-1.475,0.725)); +#11683 = DIRECTION('',(9.95799250103E-17,-1.,0.)); +#11684 = DIRECTION('',(-4.440892098501E-15,-4.422237021476E-31,1.)); +#11685 = DEFINITIONAL_REPRESENTATION('',(#11686),#11690); +#11686 = LINE('',#11687,#11688); +#11687 = CARTESIAN_POINT('',(0.,0.)); +#11688 = VECTOR('',#11689,1.); +#11689 = DIRECTION('',(0.,-1.)); +#11690 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11691 = ADVANCED_FACE('',(#11692),#6298,.F.); +#11692 = FACE_BOUND('',#11693,.F.); +#11693 = EDGE_LOOP('',(#11694,#11722,#11723,#11746)); +#11694 = ORIENTED_EDGE('',*,*,#11695,.F.); +#11695 = EDGE_CURVE('',#6283,#11696,#11698,.T.); +#11696 = VERTEX_POINT('',#11697); +#11697 = CARTESIAN_POINT('',(-2.25,1.065,0.825)); +#11698 = SURFACE_CURVE('',#11699,(#11703,#11710),.PCURVE_S1.); +#11699 = LINE('',#11700,#11701); +#11700 = CARTESIAN_POINT('',(-1.8,1.065,0.825)); +#11701 = VECTOR('',#11702,1.); +#11702 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#11703 = PCURVE('',#6298,#11704); +#11704 = DEFINITIONAL_REPRESENTATION('',(#11705),#11709); +#11705 = LINE('',#11706,#11707); +#11706 = CARTESIAN_POINT('',(0.,0.)); +#11707 = VECTOR('',#11708,1.); +#11708 = DIRECTION('',(1.,0.)); +#11709 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11710 = PCURVE('',#11711,#11716); +#11711 = PLANE('',#11712); +#11712 = AXIS2_PLACEMENT_3D('',#11713,#11714,#11715); +#11713 = CARTESIAN_POINT('',(-2.41578967201,1.065,0.532659657565)); +#11714 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#11715 = DIRECTION('',(0.,0.,1.)); +#11716 = DEFINITIONAL_REPRESENTATION('',(#11717),#11721); +#11717 = LINE('',#11718,#11719); +#11718 = CARTESIAN_POINT('',(0.292340342435,0.61578967201)); +#11719 = VECTOR('',#11720,1.); +#11720 = DIRECTION('',(0.,-1.)); +#11721 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11722 = ORIENTED_EDGE('',*,*,#6282,.T.); +#11723 = ORIENTED_EDGE('',*,*,#11724,.T.); +#11724 = EDGE_CURVE('',#6255,#11725,#11727,.T.); +#11725 = VERTEX_POINT('',#11726); +#11726 = CARTESIAN_POINT('',(-2.25,1.475,0.825)); +#11727 = SURFACE_CURVE('',#11728,(#11732,#11739),.PCURVE_S1.); +#11728 = LINE('',#11729,#11730); +#11729 = CARTESIAN_POINT('',(-1.8,1.475,0.825)); +#11730 = VECTOR('',#11731,1.); +#11731 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#11732 = PCURVE('',#6298,#11733); +#11733 = DEFINITIONAL_REPRESENTATION('',(#11734),#11738); +#11734 = LINE('',#11735,#11736); +#11735 = CARTESIAN_POINT('',(-4.082776925422E-17,-0.41)); +#11736 = VECTOR('',#11737,1.); +#11737 = DIRECTION('',(1.,0.)); +#11738 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11739 = PCURVE('',#11549,#11740); +#11740 = DEFINITIONAL_REPRESENTATION('',(#11741),#11745); +#11741 = LINE('',#11742,#11743); +#11742 = CARTESIAN_POINT('',(0.292340342435,0.61578967201)); +#11743 = VECTOR('',#11744,1.); +#11744 = DIRECTION('',(0.,-1.)); +#11745 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11746 = ORIENTED_EDGE('',*,*,#11747,.F.); +#11747 = EDGE_CURVE('',#11696,#11725,#11748,.T.); +#11748 = SURFACE_CURVE('',#11749,(#11753,#11760),.PCURVE_S1.); +#11749 = LINE('',#11750,#11751); +#11750 = CARTESIAN_POINT('',(-2.25,1.065,0.825)); +#11751 = VECTOR('',#11752,1.); +#11752 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#11753 = PCURVE('',#6298,#11754); +#11754 = DEFINITIONAL_REPRESENTATION('',(#11755),#11759); +#11755 = LINE('',#11756,#11757); +#11756 = CARTESIAN_POINT('',(0.45,-4.481096625463E-17)); +#11757 = VECTOR('',#11758,1.); +#11758 = DIRECTION('',(0.,-1.)); +#11759 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11760 = PCURVE('',#11761,#11766); +#11761 = CYLINDRICAL_SURFACE('',#11762,0.1); +#11762 = AXIS2_PLACEMENT_3D('',#11763,#11764,#11765); +#11763 = CARTESIAN_POINT('',(-2.25,1.065,0.725)); +#11764 = DIRECTION('',(9.95799250103E-17,-1.,0.)); +#11765 = DIRECTION('',(-4.440892098501E-15,-4.422237021476E-31,1.)); +#11766 = DEFINITIONAL_REPRESENTATION('',(#11767),#11771); +#11767 = LINE('',#11768,#11769); +#11768 = CARTESIAN_POINT('',(0.,0.)); +#11769 = VECTOR('',#11770,1.); +#11770 = DIRECTION('',(0.,-1.)); +#11771 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11772 = ADVANCED_FACE('',(#11773),#6382,.F.); +#11773 = FACE_BOUND('',#11774,.F.); +#11774 = EDGE_LOOP('',(#11775,#11798,#11799,#11827)); +#11775 = ORIENTED_EDGE('',*,*,#11776,.F.); +#11776 = EDGE_CURVE('',#6367,#11777,#11779,.T.); +#11777 = VERTEX_POINT('',#11778); +#11778 = CARTESIAN_POINT('',(-1.95,-1.065,1.025)); +#11779 = SURFACE_CURVE('',#11780,(#11784,#11791),.PCURVE_S1.); +#11780 = LINE('',#11781,#11782); +#11781 = CARTESIAN_POINT('',(-1.95,-1.065,0.778829828783)); +#11782 = VECTOR('',#11783,1.); +#11783 = DIRECTION('',(0.,0.,1.)); +#11784 = PCURVE('',#6382,#11785); +#11785 = DEFINITIONAL_REPRESENTATION('',(#11786),#11790); +#11786 = LINE('',#11787,#11788); +#11787 = CARTESIAN_POINT('',(3.11,-0.246170171217)); +#11788 = VECTOR('',#11789,1.); +#11789 = DIRECTION('',(0.,1.)); +#11790 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11791 = PCURVE('',#11654,#11792); +#11792 = DEFINITIONAL_REPRESENTATION('',(#11793),#11797); +#11793 = LINE('',#11794,#11795); +#11794 = CARTESIAN_POINT('',(0.246170171218,0.46578967201)); +#11795 = VECTOR('',#11796,1.); +#11796 = DIRECTION('',(1.,0.)); +#11797 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11798 = ORIENTED_EDGE('',*,*,#6366,.T.); +#11799 = ORIENTED_EDGE('',*,*,#11800,.T.); +#11800 = EDGE_CURVE('',#6339,#11801,#11803,.T.); +#11801 = VERTEX_POINT('',#11802); +#11802 = CARTESIAN_POINT('',(-1.95,-0.205,1.025)); +#11803 = SURFACE_CURVE('',#11804,(#11808,#11815),.PCURVE_S1.); +#11804 = LINE('',#11805,#11806); +#11805 = CARTESIAN_POINT('',(-1.95,-0.205,0.778829828783)); +#11806 = VECTOR('',#11807,1.); +#11807 = DIRECTION('',(0.,0.,1.)); +#11808 = PCURVE('',#6382,#11809); +#11809 = DEFINITIONAL_REPRESENTATION('',(#11810),#11814); +#11810 = LINE('',#11811,#11812); +#11811 = CARTESIAN_POINT('',(3.97,-0.246170171217)); +#11812 = VECTOR('',#11813,1.); +#11813 = DIRECTION('',(0.,1.)); +#11814 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11815 = PCURVE('',#11816,#11821); +#11816 = PLANE('',#11817); +#11817 = AXIS2_PLACEMENT_3D('',#11818,#11819,#11820); +#11818 = CARTESIAN_POINT('',(-2.41578967201,-0.205,0.532659657565)); +#11819 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#11820 = DIRECTION('',(0.,0.,1.)); +#11821 = DEFINITIONAL_REPRESENTATION('',(#11822),#11826); +#11822 = LINE('',#11823,#11824); +#11823 = CARTESIAN_POINT('',(0.246170171218,0.46578967201)); +#11824 = VECTOR('',#11825,1.); +#11825 = DIRECTION('',(1.,0.)); +#11826 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11827 = ORIENTED_EDGE('',*,*,#11828,.F.); +#11828 = EDGE_CURVE('',#11777,#11801,#11829,.T.); +#11829 = SURFACE_CURVE('',#11830,(#11834,#11841),.PCURVE_S1.); +#11830 = LINE('',#11831,#11832); +#11831 = CARTESIAN_POINT('',(-1.95,-4.175,1.025)); +#11832 = VECTOR('',#11833,1.); +#11833 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#11834 = PCURVE('',#6382,#11835); +#11835 = DEFINITIONAL_REPRESENTATION('',(#11836),#11840); +#11836 = LINE('',#11837,#11838); +#11837 = CARTESIAN_POINT('',(0.,0.)); +#11838 = VECTOR('',#11839,1.); +#11839 = DIRECTION('',(1.,0.)); +#11840 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11841 = PCURVE('',#11842,#11847); +#11842 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#11843,#11844) + ,(#11845,#11846 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,8.35),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#11843 = CARTESIAN_POINT('',(-1.95,-4.175,1.025)); +#11844 = CARTESIAN_POINT('',(-1.875,-4.1375,1.025)); +#11845 = CARTESIAN_POINT('',(-1.95,4.175,1.025)); +#11846 = CARTESIAN_POINT('',(-1.875,4.1375,1.025)); +#11847 = DEFINITIONAL_REPRESENTATION('',(#11848),#11852); +#11848 = LINE('',#11849,#11850); +#11849 = CARTESIAN_POINT('',(0.,4.305728658121E-15)); +#11850 = VECTOR('',#11851,1.); +#11851 = DIRECTION('',(1.,-3.5444335244E-15)); +#11852 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11853 = ADVANCED_FACE('',(#11854),#6326,.F.); +#11854 = FACE_BOUND('',#11855,.F.); +#11855 = EDGE_LOOP('',(#11856,#11884,#11885,#11908)); +#11856 = ORIENTED_EDGE('',*,*,#11857,.F.); +#11857 = EDGE_CURVE('',#6311,#11858,#11860,.T.); +#11858 = VERTEX_POINT('',#11859); +#11859 = CARTESIAN_POINT('',(-1.95,0.205,1.025)); +#11860 = SURFACE_CURVE('',#11861,(#11865,#11872),.PCURVE_S1.); +#11861 = LINE('',#11862,#11863); +#11862 = CARTESIAN_POINT('',(-1.95,0.205,0.778829828783)); +#11863 = VECTOR('',#11864,1.); +#11864 = DIRECTION('',(0.,0.,1.)); +#11865 = PCURVE('',#6326,#11866); +#11866 = DEFINITIONAL_REPRESENTATION('',(#11867),#11871); +#11867 = LINE('',#11868,#11869); +#11868 = CARTESIAN_POINT('',(4.38,-0.246170171217)); +#11869 = VECTOR('',#11870,1.); +#11870 = DIRECTION('',(0.,1.)); +#11871 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11872 = PCURVE('',#11873,#11878); +#11873 = PLANE('',#11874); +#11874 = AXIS2_PLACEMENT_3D('',#11875,#11876,#11877); +#11875 = CARTESIAN_POINT('',(-2.41578967201,0.205,0.532659657565)); +#11876 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#11877 = DIRECTION('',(0.,0.,1.)); +#11878 = DEFINITIONAL_REPRESENTATION('',(#11879),#11883); +#11879 = LINE('',#11880,#11881); +#11880 = CARTESIAN_POINT('',(0.246170171218,0.46578967201)); +#11881 = VECTOR('',#11882,1.); +#11882 = DIRECTION('',(1.,0.)); +#11883 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11884 = ORIENTED_EDGE('',*,*,#6310,.T.); +#11885 = ORIENTED_EDGE('',*,*,#11886,.T.); +#11886 = EDGE_CURVE('',#6283,#11887,#11889,.T.); +#11887 = VERTEX_POINT('',#11888); +#11888 = CARTESIAN_POINT('',(-1.95,1.065,1.025)); +#11889 = SURFACE_CURVE('',#11890,(#11894,#11901),.PCURVE_S1.); +#11890 = LINE('',#11891,#11892); +#11891 = CARTESIAN_POINT('',(-1.95,1.065,0.778829828783)); +#11892 = VECTOR('',#11893,1.); +#11893 = DIRECTION('',(0.,0.,1.)); +#11894 = PCURVE('',#6326,#11895); +#11895 = DEFINITIONAL_REPRESENTATION('',(#11896),#11900); +#11896 = LINE('',#11897,#11898); +#11897 = CARTESIAN_POINT('',(5.24,-0.246170171217)); +#11898 = VECTOR('',#11899,1.); +#11899 = DIRECTION('',(0.,1.)); +#11900 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11901 = PCURVE('',#11711,#11902); +#11902 = DEFINITIONAL_REPRESENTATION('',(#11903),#11907); +#11903 = LINE('',#11904,#11905); +#11904 = CARTESIAN_POINT('',(0.246170171218,0.46578967201)); +#11905 = VECTOR('',#11906,1.); +#11906 = DIRECTION('',(1.,0.)); +#11907 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11908 = ORIENTED_EDGE('',*,*,#11909,.F.); +#11909 = EDGE_CURVE('',#11858,#11887,#11910,.T.); +#11910 = SURFACE_CURVE('',#11911,(#11915,#11922),.PCURVE_S1.); +#11911 = LINE('',#11912,#11913); +#11912 = CARTESIAN_POINT('',(-1.95,-4.175,1.025)); +#11913 = VECTOR('',#11914,1.); +#11914 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#11915 = PCURVE('',#6326,#11916); +#11916 = DEFINITIONAL_REPRESENTATION('',(#11917),#11921); +#11917 = LINE('',#11918,#11919); +#11918 = CARTESIAN_POINT('',(0.,0.)); +#11919 = VECTOR('',#11920,1.); +#11920 = DIRECTION('',(1.,0.)); +#11921 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11922 = PCURVE('',#11923,#11928); +#11923 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#11924,#11925) + ,(#11926,#11927 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,8.35),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#11924 = CARTESIAN_POINT('',(-1.95,-4.175,1.025)); +#11925 = CARTESIAN_POINT('',(-1.875,-4.1375,1.025)); +#11926 = CARTESIAN_POINT('',(-1.95,4.175,1.025)); +#11927 = CARTESIAN_POINT('',(-1.875,4.1375,1.025)); +#11928 = DEFINITIONAL_REPRESENTATION('',(#11929),#11933); +#11929 = LINE('',#11930,#11931); +#11930 = CARTESIAN_POINT('',(0.,6.317715227157E-15)); +#11931 = VECTOR('',#11932,1.); +#11932 = DIRECTION('',(1.,-3.671478241092E-15)); +#11933 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11934 = ADVANCED_FACE('',(#11935),#6354,.F.); +#11935 = FACE_BOUND('',#11936,.F.); +#11936 = EDGE_LOOP('',(#11937,#11960,#11961,#11984)); +#11937 = ORIENTED_EDGE('',*,*,#11938,.F.); +#11938 = EDGE_CURVE('',#6339,#11939,#11941,.T.); +#11939 = VERTEX_POINT('',#11940); +#11940 = CARTESIAN_POINT('',(-2.25,-0.205,0.825)); +#11941 = SURFACE_CURVE('',#11942,(#11946,#11953),.PCURVE_S1.); +#11942 = LINE('',#11943,#11944); +#11943 = CARTESIAN_POINT('',(-1.8,-0.205,0.825)); +#11944 = VECTOR('',#11945,1.); +#11945 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#11946 = PCURVE('',#6354,#11947); +#11947 = DEFINITIONAL_REPRESENTATION('',(#11948),#11952); +#11948 = LINE('',#11949,#11950); +#11949 = CARTESIAN_POINT('',(0.,0.)); +#11950 = VECTOR('',#11951,1.); +#11951 = DIRECTION('',(1.,0.)); +#11952 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11953 = PCURVE('',#11816,#11954); +#11954 = DEFINITIONAL_REPRESENTATION('',(#11955),#11959); +#11955 = LINE('',#11956,#11957); +#11956 = CARTESIAN_POINT('',(0.292340342435,0.61578967201)); +#11957 = VECTOR('',#11958,1.); +#11958 = DIRECTION('',(0.,-1.)); +#11959 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11960 = ORIENTED_EDGE('',*,*,#6338,.T.); +#11961 = ORIENTED_EDGE('',*,*,#11962,.T.); +#11962 = EDGE_CURVE('',#6311,#11963,#11965,.T.); +#11963 = VERTEX_POINT('',#11964); +#11964 = CARTESIAN_POINT('',(-2.25,0.205,0.825)); +#11965 = SURFACE_CURVE('',#11966,(#11970,#11977),.PCURVE_S1.); +#11966 = LINE('',#11967,#11968); +#11967 = CARTESIAN_POINT('',(-1.8,0.205,0.825)); +#11968 = VECTOR('',#11969,1.); +#11969 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#11970 = PCURVE('',#6354,#11971); +#11971 = DEFINITIONAL_REPRESENTATION('',(#11972),#11976); +#11972 = LINE('',#11973,#11974); +#11973 = CARTESIAN_POINT('',(-4.082776925422E-17,-0.41)); +#11974 = VECTOR('',#11975,1.); +#11975 = DIRECTION('',(1.,0.)); +#11976 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11977 = PCURVE('',#11873,#11978); +#11978 = DEFINITIONAL_REPRESENTATION('',(#11979),#11983); +#11979 = LINE('',#11980,#11981); +#11980 = CARTESIAN_POINT('',(0.292340342435,0.61578967201)); +#11981 = VECTOR('',#11982,1.); +#11982 = DIRECTION('',(0.,-1.)); +#11983 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11984 = ORIENTED_EDGE('',*,*,#11985,.F.); +#11985 = EDGE_CURVE('',#11939,#11963,#11986,.T.); +#11986 = SURFACE_CURVE('',#11987,(#11991,#11998),.PCURVE_S1.); +#11987 = LINE('',#11988,#11989); +#11988 = CARTESIAN_POINT('',(-2.25,-0.205,0.825)); +#11989 = VECTOR('',#11990,1.); +#11990 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#11991 = PCURVE('',#6354,#11992); +#11992 = DEFINITIONAL_REPRESENTATION('',(#11993),#11997); +#11993 = LINE('',#11994,#11995); +#11994 = CARTESIAN_POINT('',(0.45,-4.481096625463E-17)); +#11995 = VECTOR('',#11996,1.); +#11996 = DIRECTION('',(0.,-1.)); +#11997 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#11998 = PCURVE('',#11999,#12004); +#11999 = CYLINDRICAL_SURFACE('',#12000,0.1); +#12000 = AXIS2_PLACEMENT_3D('',#12001,#12002,#12003); +#12001 = CARTESIAN_POINT('',(-2.25,-0.205,0.725)); +#12002 = DIRECTION('',(9.95799250103E-17,-1.,0.)); +#12003 = DIRECTION('',(-4.440892098501E-15,-4.422237021476E-31,1.)); +#12004 = DEFINITIONAL_REPRESENTATION('',(#12005),#12009); +#12005 = LINE('',#12006,#12007); +#12006 = CARTESIAN_POINT('',(0.,0.)); +#12007 = VECTOR('',#12008,1.); +#12008 = DIRECTION('',(0.,-1.)); +#12009 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12010 = ADVANCED_FACE('',(#12011),#6580,.F.); +#12011 = FACE_BOUND('',#12012,.F.); +#12012 = EDGE_LOOP('',(#12013,#12014,#12015,#12041)); +#12013 = ORIENTED_EDGE('',*,*,#6566,.T.); +#12014 = ORIENTED_EDGE('',*,*,#10051,.T.); +#12015 = ORIENTED_EDGE('',*,*,#12016,.F.); +#12016 = EDGE_CURVE('',#10918,#10029,#12017,.T.); +#12017 = SURFACE_CURVE('',#12018,(#12022,#12029),.PCURVE_S1.); +#12018 = LINE('',#12019,#12020); +#12019 = CARTESIAN_POINT('',(-1.95,4.175,1.025)); +#12020 = VECTOR('',#12021,1.); +#12021 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#12022 = PCURVE('',#6580,#12023); +#12023 = DEFINITIONAL_REPRESENTATION('',(#12024),#12028); +#12024 = LINE('',#12025,#12026); +#12025 = CARTESIAN_POINT('',(0.,0.)); +#12026 = VECTOR('',#12027,1.); +#12027 = DIRECTION('',(1.,0.)); +#12028 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12029 = PCURVE('',#12030,#12035); +#12030 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#12031,#12032) + ,(#12033,#12034 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#12031 = CARTESIAN_POINT('',(-1.95,4.175,1.025)); +#12032 = CARTESIAN_POINT('',(-1.875,4.1375,1.025)); +#12033 = CARTESIAN_POINT('',(-1.775,4.35,1.025)); +#12034 = CARTESIAN_POINT('',(-1.7375,4.275,1.025)); +#12035 = DEFINITIONAL_REPRESENTATION('',(#12036),#12040); +#12036 = LINE('',#12037,#12038); +#12037 = CARTESIAN_POINT('',(8.24192440478E-16,-9.160293478888E-15)); +#12038 = VECTOR('',#12039,1.); +#12039 = DIRECTION('',(1.,2.591639481402E-14)); +#12040 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12041 = ORIENTED_EDGE('',*,*,#10917,.F.); +#12042 = ADVANCED_FACE('',(#12043),#6631,.F.); +#12043 = FACE_BOUND('',#12044,.F.); +#12044 = EDGE_LOOP('',(#12045,#12046,#12066,#12067)); +#12045 = ORIENTED_EDGE('',*,*,#6617,.T.); +#12046 = ORIENTED_EDGE('',*,*,#12047,.T.); +#12047 = EDGE_CURVE('',#6598,#10311,#12048,.T.); +#12048 = SURFACE_CURVE('',#12049,(#12052,#12059),.PCURVE_S1.); +#12049 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#12050,#12051),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#12050 = CARTESIAN_POINT('',(1.775,-4.35,1.025)); +#12051 = CARTESIAN_POINT('',(1.7375,-4.275,1.025)); +#12052 = PCURVE('',#6631,#12053); +#12053 = DEFINITIONAL_REPRESENTATION('',(#12054),#12058); +#12054 = LINE('',#12055,#12056); +#12055 = CARTESIAN_POINT('',(0.247487373415,-4.720042819535E-15)); +#12056 = VECTOR('',#12057,1.); +#12057 = DIRECTION('',(-1.387778780781E-16,1.)); +#12058 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12059 = PCURVE('',#10762,#12060); +#12060 = DEFINITIONAL_REPRESENTATION('',(#12061),#12065); +#12061 = LINE('',#12062,#12063); +#12062 = CARTESIAN_POINT('',(3.564514819754E-17,1.042859870759E-15)); +#12063 = VECTOR('',#12064,1.); +#12064 = DIRECTION('',(-1.369030492256E-16,1.)); +#12065 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12066 = ORIENTED_EDGE('',*,*,#10310,.F.); +#12067 = ORIENTED_EDGE('',*,*,#6953,.F.); +#12068 = ADVANCED_FACE('',(#12069),#6896,.T.); +#12069 = FACE_BOUND('',#12070,.T.); +#12070 = EDGE_LOOP('',(#12071,#12072,#12073,#12074)); +#12071 = ORIENTED_EDGE('',*,*,#7174,.T.); +#12072 = ORIENTED_EDGE('',*,*,#10387,.T.); +#12073 = ORIENTED_EDGE('',*,*,#6879,.F.); +#12074 = ORIENTED_EDGE('',*,*,#12075,.F.); +#12075 = EDGE_CURVE('',#7152,#6852,#12076,.T.); +#12076 = SURFACE_CURVE('',#12077,(#12081,#12088),.PCURVE_S1.); +#12077 = LINE('',#12078,#12079); +#12078 = CARTESIAN_POINT('',(2.55,-3.605,0.725)); +#12079 = VECTOR('',#12080,1.); +#12080 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#12081 = PCURVE('',#6896,#12082); +#12082 = DEFINITIONAL_REPRESENTATION('',(#12083),#12087); +#12083 = LINE('',#12084,#12085); +#12084 = CARTESIAN_POINT('',(6.28318530718,0.)); +#12085 = VECTOR('',#12086,1.); +#12086 = DIRECTION('',(0.,-1.)); +#12087 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12088 = PCURVE('',#6867,#12089); +#12089 = DEFINITIONAL_REPRESENTATION('',(#12090),#12094); +#12090 = LINE('',#12091,#12092); +#12091 = CARTESIAN_POINT('',(0.425,0.)); +#12092 = VECTOR('',#12093,1.); +#12093 = DIRECTION('',(0.,-1.)); +#12094 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12095 = ADVANCED_FACE('',(#12096),#6867,.F.); +#12096 = FACE_BOUND('',#12097,.F.); +#12097 = EDGE_LOOP('',(#12098,#12119,#12120,#12121)); +#12098 = ORIENTED_EDGE('',*,*,#12099,.T.); +#12099 = EDGE_CURVE('',#7124,#6819,#12100,.T.); +#12100 = SURFACE_CURVE('',#12101,(#12105,#12112),.PCURVE_S1.); +#12101 = LINE('',#12102,#12103); +#12102 = CARTESIAN_POINT('',(2.55,-3.605,0.3)); +#12103 = VECTOR('',#12104,1.); +#12104 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#12105 = PCURVE('',#6867,#12106); +#12106 = DEFINITIONAL_REPRESENTATION('',(#12107),#12111); +#12107 = LINE('',#12108,#12109); +#12108 = CARTESIAN_POINT('',(0.,0.)); +#12109 = VECTOR('',#12110,1.); +#12110 = DIRECTION('',(0.,-1.)); +#12111 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12112 = PCURVE('',#6839,#12113); +#12113 = DEFINITIONAL_REPRESENTATION('',(#12114),#12118); +#12114 = LINE('',#12115,#12116); +#12115 = CARTESIAN_POINT('',(1.570796326795,0.)); +#12116 = VECTOR('',#12117,1.); +#12117 = DIRECTION('',(0.,-1.)); +#12118 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12119 = ORIENTED_EDGE('',*,*,#6851,.T.); +#12120 = ORIENTED_EDGE('',*,*,#12075,.F.); +#12121 = ORIENTED_EDGE('',*,*,#7151,.F.); +#12122 = ADVANCED_FACE('',(#12123),#6839,.F.); +#12123 = FACE_BOUND('',#12124,.F.); +#12124 = EDGE_LOOP('',(#12125,#12146,#12147,#12148)); +#12125 = ORIENTED_EDGE('',*,*,#12126,.T.); +#12126 = EDGE_CURVE('',#7101,#6791,#12127,.T.); +#12127 = SURFACE_CURVE('',#12128,(#12132,#12139),.PCURVE_S1.); +#12128 = LINE('',#12129,#12130); +#12129 = CARTESIAN_POINT('',(2.65,-3.605,0.2)); +#12130 = VECTOR('',#12131,1.); +#12131 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#12132 = PCURVE('',#6839,#12133); +#12133 = DEFINITIONAL_REPRESENTATION('',(#12134),#12138); +#12134 = LINE('',#12135,#12136); +#12135 = CARTESIAN_POINT('',(0.,0.)); +#12136 = VECTOR('',#12137,1.); +#12137 = DIRECTION('',(0.,-1.)); +#12138 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12139 = PCURVE('',#6806,#12140); +#12140 = DEFINITIONAL_REPRESENTATION('',(#12141),#12145); +#12141 = LINE('',#12142,#12143); +#12142 = CARTESIAN_POINT('',(0.35,7.771561172375E-17)); +#12143 = VECTOR('',#12144,1.); +#12144 = DIRECTION('',(0.,-1.)); +#12145 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12146 = ORIENTED_EDGE('',*,*,#6818,.T.); +#12147 = ORIENTED_EDGE('',*,*,#12099,.F.); +#12148 = ORIENTED_EDGE('',*,*,#7123,.F.); +#12149 = ADVANCED_FACE('',(#12150),#6806,.F.); +#12150 = FACE_BOUND('',#12151,.F.); +#12151 = EDGE_LOOP('',(#12152,#12173,#12174,#12175)); +#12152 = ORIENTED_EDGE('',*,*,#12153,.T.); +#12153 = EDGE_CURVE('',#7078,#6763,#12154,.T.); +#12154 = SURFACE_CURVE('',#12155,(#12159,#12166),.PCURVE_S1.); +#12155 = LINE('',#12156,#12157); +#12156 = CARTESIAN_POINT('',(3.,-3.605,0.2)); +#12157 = VECTOR('',#12158,1.); +#12158 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#12159 = PCURVE('',#6806,#12160); +#12160 = DEFINITIONAL_REPRESENTATION('',(#12161),#12165); +#12161 = LINE('',#12162,#12163); +#12162 = CARTESIAN_POINT('',(-0.,0.)); +#12163 = VECTOR('',#12164,1.); +#12164 = DIRECTION('',(0.,-1.)); +#12165 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12166 = PCURVE('',#6778,#12167); +#12167 = DEFINITIONAL_REPRESENTATION('',(#12168),#12172); +#12168 = LINE('',#12169,#12170); +#12169 = CARTESIAN_POINT('',(0.2,0.)); +#12170 = VECTOR('',#12171,1.); +#12171 = DIRECTION('',(0.,-1.)); +#12172 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12173 = ORIENTED_EDGE('',*,*,#6790,.T.); +#12174 = ORIENTED_EDGE('',*,*,#12126,.F.); +#12175 = ORIENTED_EDGE('',*,*,#7100,.F.); +#12176 = ADVANCED_FACE('',(#12177),#6778,.F.); +#12177 = FACE_BOUND('',#12178,.F.); +#12178 = EDGE_LOOP('',(#12179,#12200,#12201,#12202)); +#12179 = ORIENTED_EDGE('',*,*,#12180,.T.); +#12180 = EDGE_CURVE('',#7055,#6735,#12181,.T.); +#12181 = SURFACE_CURVE('',#12182,(#12186,#12193),.PCURVE_S1.); +#12182 = LINE('',#12183,#12184); +#12183 = CARTESIAN_POINT('',(3.,-3.605,5.551115123126E-17)); +#12184 = VECTOR('',#12185,1.); +#12185 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#12186 = PCURVE('',#6778,#12187); +#12187 = DEFINITIONAL_REPRESENTATION('',(#12188),#12192); +#12188 = LINE('',#12189,#12190); +#12189 = CARTESIAN_POINT('',(0.,0.)); +#12190 = VECTOR('',#12191,1.); +#12191 = DIRECTION('',(0.,-1.)); +#12192 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12193 = PCURVE('',#6750,#12194); +#12194 = DEFINITIONAL_REPRESENTATION('',(#12195),#12199); +#12195 = LINE('',#12196,#12197); +#12196 = CARTESIAN_POINT('',(0.35,-7.771561172375E-17)); +#12197 = VECTOR('',#12198,1.); +#12198 = DIRECTION('',(0.,-1.)); +#12199 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12200 = ORIENTED_EDGE('',*,*,#6762,.T.); +#12201 = ORIENTED_EDGE('',*,*,#12153,.F.); +#12202 = ORIENTED_EDGE('',*,*,#7077,.F.); +#12203 = ADVANCED_FACE('',(#12204),#6750,.F.); +#12204 = FACE_BOUND('',#12205,.F.); +#12205 = EDGE_LOOP('',(#12206,#12227,#12228,#12229)); +#12206 = ORIENTED_EDGE('',*,*,#12207,.T.); +#12207 = EDGE_CURVE('',#7031,#6706,#12208,.T.); +#12208 = SURFACE_CURVE('',#12209,(#12213,#12220),.PCURVE_S1.); +#12209 = LINE('',#12210,#12211); +#12210 = CARTESIAN_POINT('',(2.65,-3.605,5.551115123126E-17)); +#12211 = VECTOR('',#12212,1.); +#12212 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#12213 = PCURVE('',#6750,#12214); +#12214 = DEFINITIONAL_REPRESENTATION('',(#12215),#12219); +#12215 = LINE('',#12216,#12217); +#12216 = CARTESIAN_POINT('',(0.,0.)); +#12217 = VECTOR('',#12218,1.); +#12218 = DIRECTION('',(0.,-1.)); +#12219 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12220 = PCURVE('',#6722,#12221); +#12221 = DEFINITIONAL_REPRESENTATION('',(#12222),#12226); +#12222 = LINE('',#12223,#12224); +#12223 = CARTESIAN_POINT('',(4.712388980385,0.)); +#12224 = VECTOR('',#12225,1.); +#12225 = DIRECTION('',(0.,-1.)); +#12226 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12227 = ORIENTED_EDGE('',*,*,#6734,.T.); +#12228 = ORIENTED_EDGE('',*,*,#12180,.F.); +#12229 = ORIENTED_EDGE('',*,*,#7054,.F.); +#12230 = ADVANCED_FACE('',(#12231),#6722,.T.); +#12231 = FACE_BOUND('',#12232,.T.); +#12232 = EDGE_LOOP('',(#12233,#12234,#12235,#12236)); +#12233 = ORIENTED_EDGE('',*,*,#7030,.T.); +#12234 = ORIENTED_EDGE('',*,*,#12207,.T.); +#12235 = ORIENTED_EDGE('',*,*,#6705,.F.); +#12236 = ORIENTED_EDGE('',*,*,#12237,.F.); +#12237 = EDGE_CURVE('',#7008,#6678,#12238,.T.); +#12238 = SURFACE_CURVE('',#12239,(#12243,#12250),.PCURVE_S1.); +#12239 = LINE('',#12240,#12241); +#12240 = CARTESIAN_POINT('',(2.35,-3.605,0.3)); +#12241 = VECTOR('',#12242,1.); +#12242 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#12243 = PCURVE('',#6722,#12244); +#12244 = DEFINITIONAL_REPRESENTATION('',(#12245),#12249); +#12245 = LINE('',#12246,#12247); +#12246 = CARTESIAN_POINT('',(6.28318530718,0.)); +#12247 = VECTOR('',#12248,1.); +#12248 = DIRECTION('',(0.,-1.)); +#12249 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12250 = PCURVE('',#6693,#12251); +#12251 = DEFINITIONAL_REPRESENTATION('',(#12252),#12256); +#12252 = LINE('',#12253,#12254); +#12253 = CARTESIAN_POINT('',(0.425,-9.860761315258E-32)); +#12254 = VECTOR('',#12255,1.); +#12255 = DIRECTION('',(7.584527938158E-44,-1.)); +#12256 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12257 = ADVANCED_FACE('',(#12258),#6693,.F.); +#12258 = FACE_BOUND('',#12259,.F.); +#12259 = EDGE_LOOP('',(#12260,#12261,#12262,#12263)); +#12260 = ORIENTED_EDGE('',*,*,#7224,.T.); +#12261 = ORIENTED_EDGE('',*,*,#6677,.T.); +#12262 = ORIENTED_EDGE('',*,*,#12237,.F.); +#12263 = ORIENTED_EDGE('',*,*,#7007,.F.); +#12264 = ADVANCED_FACE('',(#12265),#7498,.T.); +#12265 = FACE_BOUND('',#12266,.T.); +#12266 = EDGE_LOOP('',(#12267,#12268,#12269,#12270)); +#12267 = ORIENTED_EDGE('',*,*,#8048,.T.); +#12268 = ORIENTED_EDGE('',*,*,#10445,.T.); +#12269 = ORIENTED_EDGE('',*,*,#7481,.F.); +#12270 = ORIENTED_EDGE('',*,*,#12271,.F.); +#12271 = EDGE_CURVE('',#8026,#7454,#12272,.T.); +#12272 = SURFACE_CURVE('',#12273,(#12277,#12284),.PCURVE_S1.); +#12273 = LINE('',#12274,#12275); +#12274 = CARTESIAN_POINT('',(2.55,-2.335,0.725)); +#12275 = VECTOR('',#12276,1.); +#12276 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#12277 = PCURVE('',#7498,#12278); +#12278 = DEFINITIONAL_REPRESENTATION('',(#12279),#12283); +#12279 = LINE('',#12280,#12281); +#12280 = CARTESIAN_POINT('',(6.28318530718,0.)); +#12281 = VECTOR('',#12282,1.); +#12282 = DIRECTION('',(0.,-1.)); +#12283 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12284 = PCURVE('',#7469,#12285); +#12285 = DEFINITIONAL_REPRESENTATION('',(#12286),#12290); +#12286 = LINE('',#12287,#12288); +#12287 = CARTESIAN_POINT('',(0.425,0.)); +#12288 = VECTOR('',#12289,1.); +#12289 = DIRECTION('',(0.,-1.)); +#12290 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12291 = ADVANCED_FACE('',(#12292),#7469,.F.); +#12292 = FACE_BOUND('',#12293,.F.); +#12293 = EDGE_LOOP('',(#12294,#12315,#12316,#12317)); +#12294 = ORIENTED_EDGE('',*,*,#12295,.T.); +#12295 = EDGE_CURVE('',#7998,#7421,#12296,.T.); +#12296 = SURFACE_CURVE('',#12297,(#12301,#12308),.PCURVE_S1.); +#12297 = LINE('',#12298,#12299); +#12298 = CARTESIAN_POINT('',(2.55,-2.335,0.3)); +#12299 = VECTOR('',#12300,1.); +#12300 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#12301 = PCURVE('',#7469,#12302); +#12302 = DEFINITIONAL_REPRESENTATION('',(#12303),#12307); +#12303 = LINE('',#12304,#12305); +#12304 = CARTESIAN_POINT('',(0.,0.)); +#12305 = VECTOR('',#12306,1.); +#12306 = DIRECTION('',(0.,-1.)); +#12307 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12308 = PCURVE('',#7441,#12309); +#12309 = DEFINITIONAL_REPRESENTATION('',(#12310),#12314); +#12310 = LINE('',#12311,#12312); +#12311 = CARTESIAN_POINT('',(1.570796326795,0.)); +#12312 = VECTOR('',#12313,1.); +#12313 = DIRECTION('',(0.,-1.)); +#12314 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12315 = ORIENTED_EDGE('',*,*,#7453,.T.); +#12316 = ORIENTED_EDGE('',*,*,#12271,.F.); +#12317 = ORIENTED_EDGE('',*,*,#8025,.F.); +#12318 = ADVANCED_FACE('',(#12319),#7441,.F.); +#12319 = FACE_BOUND('',#12320,.F.); +#12320 = EDGE_LOOP('',(#12321,#12342,#12343,#12344)); +#12321 = ORIENTED_EDGE('',*,*,#12322,.T.); +#12322 = EDGE_CURVE('',#7975,#7393,#12323,.T.); +#12323 = SURFACE_CURVE('',#12324,(#12328,#12335),.PCURVE_S1.); +#12324 = LINE('',#12325,#12326); +#12325 = CARTESIAN_POINT('',(2.65,-2.335,0.2)); +#12326 = VECTOR('',#12327,1.); +#12327 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#12328 = PCURVE('',#7441,#12329); +#12329 = DEFINITIONAL_REPRESENTATION('',(#12330),#12334); +#12330 = LINE('',#12331,#12332); +#12331 = CARTESIAN_POINT('',(0.,0.)); +#12332 = VECTOR('',#12333,1.); +#12333 = DIRECTION('',(0.,-1.)); +#12334 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12335 = PCURVE('',#7408,#12336); +#12336 = DEFINITIONAL_REPRESENTATION('',(#12337),#12341); +#12337 = LINE('',#12338,#12339); +#12338 = CARTESIAN_POINT('',(0.35,7.771561172375E-17)); +#12339 = VECTOR('',#12340,1.); +#12340 = DIRECTION('',(0.,-1.)); +#12341 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12342 = ORIENTED_EDGE('',*,*,#7420,.T.); +#12343 = ORIENTED_EDGE('',*,*,#12295,.F.); +#12344 = ORIENTED_EDGE('',*,*,#7997,.F.); +#12345 = ADVANCED_FACE('',(#12346),#7408,.F.); +#12346 = FACE_BOUND('',#12347,.F.); +#12347 = EDGE_LOOP('',(#12348,#12369,#12370,#12371)); +#12348 = ORIENTED_EDGE('',*,*,#12349,.T.); +#12349 = EDGE_CURVE('',#7952,#7365,#12350,.T.); +#12350 = SURFACE_CURVE('',#12351,(#12355,#12362),.PCURVE_S1.); +#12351 = LINE('',#12352,#12353); +#12352 = CARTESIAN_POINT('',(3.,-2.335,0.2)); +#12353 = VECTOR('',#12354,1.); +#12354 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#12355 = PCURVE('',#7408,#12356); +#12356 = DEFINITIONAL_REPRESENTATION('',(#12357),#12361); +#12357 = LINE('',#12358,#12359); +#12358 = CARTESIAN_POINT('',(-0.,0.)); +#12359 = VECTOR('',#12360,1.); +#12360 = DIRECTION('',(0.,-1.)); +#12361 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12362 = PCURVE('',#7380,#12363); +#12363 = DEFINITIONAL_REPRESENTATION('',(#12364),#12368); +#12364 = LINE('',#12365,#12366); +#12365 = CARTESIAN_POINT('',(0.2,0.)); +#12366 = VECTOR('',#12367,1.); +#12367 = DIRECTION('',(0.,-1.)); +#12368 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12369 = ORIENTED_EDGE('',*,*,#7392,.T.); +#12370 = ORIENTED_EDGE('',*,*,#12322,.F.); +#12371 = ORIENTED_EDGE('',*,*,#7974,.F.); +#12372 = ADVANCED_FACE('',(#12373),#7380,.F.); +#12373 = FACE_BOUND('',#12374,.F.); +#12374 = EDGE_LOOP('',(#12375,#12396,#12397,#12398)); +#12375 = ORIENTED_EDGE('',*,*,#12376,.T.); +#12376 = EDGE_CURVE('',#7929,#7337,#12377,.T.); +#12377 = SURFACE_CURVE('',#12378,(#12382,#12389),.PCURVE_S1.); +#12378 = LINE('',#12379,#12380); +#12379 = CARTESIAN_POINT('',(3.,-2.335,5.551115123126E-17)); +#12380 = VECTOR('',#12381,1.); +#12381 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#12382 = PCURVE('',#7380,#12383); +#12383 = DEFINITIONAL_REPRESENTATION('',(#12384),#12388); +#12384 = LINE('',#12385,#12386); +#12385 = CARTESIAN_POINT('',(0.,0.)); +#12386 = VECTOR('',#12387,1.); +#12387 = DIRECTION('',(0.,-1.)); +#12388 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12389 = PCURVE('',#7352,#12390); +#12390 = DEFINITIONAL_REPRESENTATION('',(#12391),#12395); +#12391 = LINE('',#12392,#12393); +#12392 = CARTESIAN_POINT('',(0.35,-7.771561172375E-17)); +#12393 = VECTOR('',#12394,1.); +#12394 = DIRECTION('',(0.,-1.)); +#12395 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12396 = ORIENTED_EDGE('',*,*,#7364,.T.); +#12397 = ORIENTED_EDGE('',*,*,#12349,.F.); +#12398 = ORIENTED_EDGE('',*,*,#7951,.F.); +#12399 = ADVANCED_FACE('',(#12400),#7352,.F.); +#12400 = FACE_BOUND('',#12401,.F.); +#12401 = EDGE_LOOP('',(#12402,#12423,#12424,#12425)); +#12402 = ORIENTED_EDGE('',*,*,#12403,.T.); +#12403 = EDGE_CURVE('',#7905,#7308,#12404,.T.); +#12404 = SURFACE_CURVE('',#12405,(#12409,#12416),.PCURVE_S1.); +#12405 = LINE('',#12406,#12407); +#12406 = CARTESIAN_POINT('',(2.65,-2.335,5.551115123126E-17)); +#12407 = VECTOR('',#12408,1.); +#12408 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#12409 = PCURVE('',#7352,#12410); +#12410 = DEFINITIONAL_REPRESENTATION('',(#12411),#12415); +#12411 = LINE('',#12412,#12413); +#12412 = CARTESIAN_POINT('',(0.,0.)); +#12413 = VECTOR('',#12414,1.); +#12414 = DIRECTION('',(0.,-1.)); +#12415 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12416 = PCURVE('',#7324,#12417); +#12417 = DEFINITIONAL_REPRESENTATION('',(#12418),#12422); +#12418 = LINE('',#12419,#12420); +#12419 = CARTESIAN_POINT('',(4.712388980385,0.)); +#12420 = VECTOR('',#12421,1.); +#12421 = DIRECTION('',(0.,-1.)); +#12422 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12423 = ORIENTED_EDGE('',*,*,#7336,.T.); +#12424 = ORIENTED_EDGE('',*,*,#12376,.F.); +#12425 = ORIENTED_EDGE('',*,*,#7928,.F.); +#12426 = ADVANCED_FACE('',(#12427),#7324,.T.); +#12427 = FACE_BOUND('',#12428,.T.); +#12428 = EDGE_LOOP('',(#12429,#12430,#12431,#12432)); +#12429 = ORIENTED_EDGE('',*,*,#7904,.T.); +#12430 = ORIENTED_EDGE('',*,*,#12403,.T.); +#12431 = ORIENTED_EDGE('',*,*,#7307,.F.); +#12432 = ORIENTED_EDGE('',*,*,#12433,.F.); +#12433 = EDGE_CURVE('',#7882,#7280,#12434,.T.); +#12434 = SURFACE_CURVE('',#12435,(#12439,#12446),.PCURVE_S1.); +#12435 = LINE('',#12436,#12437); +#12436 = CARTESIAN_POINT('',(2.35,-2.335,0.3)); +#12437 = VECTOR('',#12438,1.); +#12438 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#12439 = PCURVE('',#7324,#12440); +#12440 = DEFINITIONAL_REPRESENTATION('',(#12441),#12445); +#12441 = LINE('',#12442,#12443); +#12442 = CARTESIAN_POINT('',(6.28318530718,0.)); +#12443 = VECTOR('',#12444,1.); +#12444 = DIRECTION('',(0.,-1.)); +#12445 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12446 = PCURVE('',#7295,#12447); +#12447 = DEFINITIONAL_REPRESENTATION('',(#12448),#12452); +#12448 = LINE('',#12449,#12450); +#12449 = CARTESIAN_POINT('',(0.425,-9.860761315258E-32)); +#12450 = VECTOR('',#12451,1.); +#12451 = DIRECTION('',(7.584527938158E-44,-1.)); +#12452 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12453 = ADVANCED_FACE('',(#12454),#7295,.F.); +#12454 = FACE_BOUND('',#12455,.F.); +#12455 = EDGE_LOOP('',(#12456,#12457,#12458,#12459)); +#12456 = ORIENTED_EDGE('',*,*,#8098,.T.); +#12457 = ORIENTED_EDGE('',*,*,#7279,.T.); +#12458 = ORIENTED_EDGE('',*,*,#12433,.F.); +#12459 = ORIENTED_EDGE('',*,*,#7881,.F.); +#12460 = ADVANCED_FACE('',(#12461),#8417,.T.); +#12461 = FACE_BOUND('',#12462,.T.); +#12462 = EDGE_LOOP('',(#12463,#12464,#12465,#12466)); +#12463 = ORIENTED_EDGE('',*,*,#8400,.T.); +#12464 = ORIENTED_EDGE('',*,*,#10416,.T.); +#12465 = ORIENTED_EDGE('',*,*,#9007,.F.); +#12466 = ORIENTED_EDGE('',*,*,#12467,.F.); +#12467 = EDGE_CURVE('',#8373,#8985,#12468,.T.); +#12468 = SURFACE_CURVE('',#12469,(#12473,#12480),.PCURVE_S1.); +#12469 = LINE('',#12470,#12471); +#12470 = CARTESIAN_POINT('',(2.55,1.475,0.725)); +#12471 = VECTOR('',#12472,1.); +#12472 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#12473 = PCURVE('',#8417,#12474); +#12474 = DEFINITIONAL_REPRESENTATION('',(#12475),#12479); +#12475 = LINE('',#12476,#12477); +#12476 = CARTESIAN_POINT('',(6.28318530718,-2.22044604925E-16)); +#12477 = VECTOR('',#12478,1.); +#12478 = DIRECTION('',(0.,-1.)); +#12479 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12480 = PCURVE('',#8388,#12481); +#12481 = DEFINITIONAL_REPRESENTATION('',(#12482),#12486); +#12482 = LINE('',#12483,#12484); +#12483 = CARTESIAN_POINT('',(0.425,0.)); +#12484 = VECTOR('',#12485,1.); +#12485 = DIRECTION('',(0.,-1.)); +#12486 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12487 = ADVANCED_FACE('',(#12488),#8388,.F.); +#12488 = FACE_BOUND('',#12489,.F.); +#12489 = EDGE_LOOP('',(#12490,#12511,#12512,#12513)); +#12490 = ORIENTED_EDGE('',*,*,#12491,.T.); +#12491 = EDGE_CURVE('',#8340,#8957,#12492,.T.); +#12492 = SURFACE_CURVE('',#12493,(#12497,#12504),.PCURVE_S1.); +#12493 = LINE('',#12494,#12495); +#12494 = CARTESIAN_POINT('',(2.55,1.475,0.3)); +#12495 = VECTOR('',#12496,1.); +#12496 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#12497 = PCURVE('',#8388,#12498); +#12498 = DEFINITIONAL_REPRESENTATION('',(#12499),#12503); +#12499 = LINE('',#12500,#12501); +#12500 = CARTESIAN_POINT('',(0.,0.)); +#12501 = VECTOR('',#12502,1.); +#12502 = DIRECTION('',(0.,-1.)); +#12503 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12504 = PCURVE('',#8360,#12505); +#12505 = DEFINITIONAL_REPRESENTATION('',(#12506),#12510); +#12506 = LINE('',#12507,#12508); +#12507 = CARTESIAN_POINT('',(1.570796326795,0.)); +#12508 = VECTOR('',#12509,1.); +#12509 = DIRECTION('',(0.,-1.)); +#12510 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12511 = ORIENTED_EDGE('',*,*,#8984,.T.); +#12512 = ORIENTED_EDGE('',*,*,#12467,.F.); +#12513 = ORIENTED_EDGE('',*,*,#8372,.F.); +#12514 = ADVANCED_FACE('',(#12515),#8360,.F.); +#12515 = FACE_BOUND('',#12516,.F.); +#12516 = EDGE_LOOP('',(#12517,#12538,#12539,#12540)); +#12517 = ORIENTED_EDGE('',*,*,#12518,.T.); +#12518 = EDGE_CURVE('',#8312,#8934,#12519,.T.); +#12519 = SURFACE_CURVE('',#12520,(#12524,#12531),.PCURVE_S1.); +#12520 = LINE('',#12521,#12522); +#12521 = CARTESIAN_POINT('',(2.65,1.475,0.2)); +#12522 = VECTOR('',#12523,1.); +#12523 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#12524 = PCURVE('',#8360,#12525); +#12525 = DEFINITIONAL_REPRESENTATION('',(#12526),#12530); +#12526 = LINE('',#12527,#12528); +#12527 = CARTESIAN_POINT('',(0.,0.)); +#12528 = VECTOR('',#12529,1.); +#12529 = DIRECTION('',(0.,-1.)); +#12530 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12531 = PCURVE('',#8327,#12532); +#12532 = DEFINITIONAL_REPRESENTATION('',(#12533),#12537); +#12533 = LINE('',#12534,#12535); +#12534 = CARTESIAN_POINT('',(0.35,7.771561172375E-17)); +#12535 = VECTOR('',#12536,1.); +#12536 = DIRECTION('',(0.,-1.)); +#12537 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12538 = ORIENTED_EDGE('',*,*,#8956,.T.); +#12539 = ORIENTED_EDGE('',*,*,#12491,.F.); +#12540 = ORIENTED_EDGE('',*,*,#8339,.F.); +#12541 = ADVANCED_FACE('',(#12542),#8327,.F.); +#12542 = FACE_BOUND('',#12543,.F.); +#12543 = EDGE_LOOP('',(#12544,#12565,#12566,#12567)); +#12544 = ORIENTED_EDGE('',*,*,#12545,.T.); +#12545 = EDGE_CURVE('',#8284,#8911,#12546,.T.); +#12546 = SURFACE_CURVE('',#12547,(#12551,#12558),.PCURVE_S1.); +#12547 = LINE('',#12548,#12549); +#12548 = CARTESIAN_POINT('',(3.,1.475,0.2)); +#12549 = VECTOR('',#12550,1.); +#12550 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#12551 = PCURVE('',#8327,#12552); +#12552 = DEFINITIONAL_REPRESENTATION('',(#12553),#12557); +#12553 = LINE('',#12554,#12555); +#12554 = CARTESIAN_POINT('',(-0.,0.)); +#12555 = VECTOR('',#12556,1.); +#12556 = DIRECTION('',(0.,-1.)); +#12557 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12558 = PCURVE('',#8299,#12559); +#12559 = DEFINITIONAL_REPRESENTATION('',(#12560),#12564); +#12560 = LINE('',#12561,#12562); +#12561 = CARTESIAN_POINT('',(0.2,0.)); +#12562 = VECTOR('',#12563,1.); +#12563 = DIRECTION('',(0.,-1.)); +#12564 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12565 = ORIENTED_EDGE('',*,*,#8933,.T.); +#12566 = ORIENTED_EDGE('',*,*,#12518,.F.); +#12567 = ORIENTED_EDGE('',*,*,#8311,.F.); +#12568 = ADVANCED_FACE('',(#12569),#8299,.F.); +#12569 = FACE_BOUND('',#12570,.F.); +#12570 = EDGE_LOOP('',(#12571,#12592,#12593,#12594)); +#12571 = ORIENTED_EDGE('',*,*,#12572,.T.); +#12572 = EDGE_CURVE('',#8256,#8888,#12573,.T.); +#12573 = SURFACE_CURVE('',#12574,(#12578,#12585),.PCURVE_S1.); +#12574 = LINE('',#12575,#12576); +#12575 = CARTESIAN_POINT('',(3.,1.475,5.551115123126E-17)); +#12576 = VECTOR('',#12577,1.); +#12577 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#12578 = PCURVE('',#8299,#12579); +#12579 = DEFINITIONAL_REPRESENTATION('',(#12580),#12584); +#12580 = LINE('',#12581,#12582); +#12581 = CARTESIAN_POINT('',(0.,0.)); +#12582 = VECTOR('',#12583,1.); +#12583 = DIRECTION('',(0.,-1.)); +#12584 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12585 = PCURVE('',#8271,#12586); +#12586 = DEFINITIONAL_REPRESENTATION('',(#12587),#12591); +#12587 = LINE('',#12588,#12589); +#12588 = CARTESIAN_POINT('',(0.35,-7.771561172375E-17)); +#12589 = VECTOR('',#12590,1.); +#12590 = DIRECTION('',(0.,-1.)); +#12591 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12592 = ORIENTED_EDGE('',*,*,#8910,.T.); +#12593 = ORIENTED_EDGE('',*,*,#12545,.F.); +#12594 = ORIENTED_EDGE('',*,*,#8283,.F.); +#12595 = ADVANCED_FACE('',(#12596),#8271,.F.); +#12596 = FACE_BOUND('',#12597,.F.); +#12597 = EDGE_LOOP('',(#12598,#12619,#12620,#12621)); +#12598 = ORIENTED_EDGE('',*,*,#12599,.T.); +#12599 = EDGE_CURVE('',#8227,#8864,#12600,.T.); +#12600 = SURFACE_CURVE('',#12601,(#12605,#12612),.PCURVE_S1.); +#12601 = LINE('',#12602,#12603); +#12602 = CARTESIAN_POINT('',(2.65,1.475,5.551115123126E-17)); +#12603 = VECTOR('',#12604,1.); +#12604 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#12605 = PCURVE('',#8271,#12606); +#12606 = DEFINITIONAL_REPRESENTATION('',(#12607),#12611); +#12607 = LINE('',#12608,#12609); +#12608 = CARTESIAN_POINT('',(0.,0.)); +#12609 = VECTOR('',#12610,1.); +#12610 = DIRECTION('',(0.,-1.)); +#12611 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12612 = PCURVE('',#8243,#12613); +#12613 = DEFINITIONAL_REPRESENTATION('',(#12614),#12618); +#12614 = LINE('',#12615,#12616); +#12615 = CARTESIAN_POINT('',(4.712388980385,0.)); +#12616 = VECTOR('',#12617,1.); +#12617 = DIRECTION('',(0.,-1.)); +#12618 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12619 = ORIENTED_EDGE('',*,*,#8887,.T.); +#12620 = ORIENTED_EDGE('',*,*,#12572,.F.); +#12621 = ORIENTED_EDGE('',*,*,#8255,.F.); +#12622 = ADVANCED_FACE('',(#12623),#8243,.T.); +#12623 = FACE_BOUND('',#12624,.T.); +#12624 = EDGE_LOOP('',(#12625,#12626,#12627,#12628)); +#12625 = ORIENTED_EDGE('',*,*,#8226,.T.); +#12626 = ORIENTED_EDGE('',*,*,#12599,.T.); +#12627 = ORIENTED_EDGE('',*,*,#8863,.F.); +#12628 = ORIENTED_EDGE('',*,*,#12629,.F.); +#12629 = EDGE_CURVE('',#8199,#8841,#12630,.T.); +#12630 = SURFACE_CURVE('',#12631,(#12635,#12642),.PCURVE_S1.); +#12631 = LINE('',#12632,#12633); +#12632 = CARTESIAN_POINT('',(2.35,1.475,0.3)); +#12633 = VECTOR('',#12634,1.); +#12634 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#12635 = PCURVE('',#8243,#12636); +#12636 = DEFINITIONAL_REPRESENTATION('',(#12637),#12641); +#12637 = LINE('',#12638,#12639); +#12638 = CARTESIAN_POINT('',(6.28318530718,2.22044604925E-16)); +#12639 = VECTOR('',#12640,1.); +#12640 = DIRECTION('',(0.,-1.)); +#12641 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12642 = PCURVE('',#8214,#12643); +#12643 = DEFINITIONAL_REPRESENTATION('',(#12644),#12648); +#12644 = LINE('',#12645,#12646); +#12645 = CARTESIAN_POINT('',(0.425,-9.860761315258E-32)); +#12646 = VECTOR('',#12647,1.); +#12647 = DIRECTION('',(7.584527938158E-44,-1.)); +#12648 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12649 = ADVANCED_FACE('',(#12650),#8214,.F.); +#12650 = FACE_BOUND('',#12651,.F.); +#12651 = EDGE_LOOP('',(#12652,#12653,#12654,#12655)); +#12652 = ORIENTED_EDGE('',*,*,#8812,.T.); +#12653 = ORIENTED_EDGE('',*,*,#8840,.T.); +#12654 = ORIENTED_EDGE('',*,*,#12629,.F.); +#12655 = ORIENTED_EDGE('',*,*,#8198,.F.); +#12656 = ADVANCED_FACE('',(#12657),#8702,.T.); +#12657 = FACE_BOUND('',#12658,.T.); +#12658 = EDGE_LOOP('',(#12659,#12660,#12661,#12662)); +#12659 = ORIENTED_EDGE('',*,*,#9252,.T.); +#12660 = ORIENTED_EDGE('',*,*,#10503,.T.); +#12661 = ORIENTED_EDGE('',*,*,#8685,.F.); +#12662 = ORIENTED_EDGE('',*,*,#12663,.F.); +#12663 = EDGE_CURVE('',#9230,#8658,#12664,.T.); +#12664 = SURFACE_CURVE('',#12665,(#12669,#12676),.PCURVE_S1.); +#12665 = LINE('',#12666,#12667); +#12666 = CARTESIAN_POINT('',(2.55,-1.065,0.725)); +#12667 = VECTOR('',#12668,1.); +#12668 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#12669 = PCURVE('',#8702,#12670); +#12670 = DEFINITIONAL_REPRESENTATION('',(#12671),#12675); +#12671 = LINE('',#12672,#12673); +#12672 = CARTESIAN_POINT('',(6.28318530718,-2.22044604925E-16)); +#12673 = VECTOR('',#12674,1.); +#12674 = DIRECTION('',(0.,-1.)); +#12675 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12676 = PCURVE('',#8673,#12677); +#12677 = DEFINITIONAL_REPRESENTATION('',(#12678),#12682); +#12678 = LINE('',#12679,#12680); +#12679 = CARTESIAN_POINT('',(0.425,0.)); +#12680 = VECTOR('',#12681,1.); +#12681 = DIRECTION('',(0.,-1.)); +#12682 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12683 = ADVANCED_FACE('',(#12684),#8673,.F.); +#12684 = FACE_BOUND('',#12685,.F.); +#12685 = EDGE_LOOP('',(#12686,#12707,#12708,#12709)); +#12686 = ORIENTED_EDGE('',*,*,#12687,.T.); +#12687 = EDGE_CURVE('',#9202,#8625,#12688,.T.); +#12688 = SURFACE_CURVE('',#12689,(#12693,#12700),.PCURVE_S1.); +#12689 = LINE('',#12690,#12691); +#12690 = CARTESIAN_POINT('',(2.55,-1.065,0.3)); +#12691 = VECTOR('',#12692,1.); +#12692 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#12693 = PCURVE('',#8673,#12694); +#12694 = DEFINITIONAL_REPRESENTATION('',(#12695),#12699); +#12695 = LINE('',#12696,#12697); +#12696 = CARTESIAN_POINT('',(0.,0.)); +#12697 = VECTOR('',#12698,1.); +#12698 = DIRECTION('',(0.,-1.)); +#12699 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12700 = PCURVE('',#8645,#12701); +#12701 = DEFINITIONAL_REPRESENTATION('',(#12702),#12706); +#12702 = LINE('',#12703,#12704); +#12703 = CARTESIAN_POINT('',(1.570796326795,0.)); +#12704 = VECTOR('',#12705,1.); +#12705 = DIRECTION('',(0.,-1.)); +#12706 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12707 = ORIENTED_EDGE('',*,*,#8657,.T.); +#12708 = ORIENTED_EDGE('',*,*,#12663,.F.); +#12709 = ORIENTED_EDGE('',*,*,#9229,.F.); +#12710 = ADVANCED_FACE('',(#12711),#8645,.F.); +#12711 = FACE_BOUND('',#12712,.F.); +#12712 = EDGE_LOOP('',(#12713,#12734,#12735,#12736)); +#12713 = ORIENTED_EDGE('',*,*,#12714,.T.); +#12714 = EDGE_CURVE('',#9179,#8597,#12715,.T.); +#12715 = SURFACE_CURVE('',#12716,(#12720,#12727),.PCURVE_S1.); +#12716 = LINE('',#12717,#12718); +#12717 = CARTESIAN_POINT('',(2.65,-1.065,0.2)); +#12718 = VECTOR('',#12719,1.); +#12719 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#12720 = PCURVE('',#8645,#12721); +#12721 = DEFINITIONAL_REPRESENTATION('',(#12722),#12726); +#12722 = LINE('',#12723,#12724); +#12723 = CARTESIAN_POINT('',(0.,0.)); +#12724 = VECTOR('',#12725,1.); +#12725 = DIRECTION('',(0.,-1.)); +#12726 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12727 = PCURVE('',#8612,#12728); +#12728 = DEFINITIONAL_REPRESENTATION('',(#12729),#12733); +#12729 = LINE('',#12730,#12731); +#12730 = CARTESIAN_POINT('',(0.35,7.771561172375E-17)); +#12731 = VECTOR('',#12732,1.); +#12732 = DIRECTION('',(0.,-1.)); +#12733 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12734 = ORIENTED_EDGE('',*,*,#8624,.T.); +#12735 = ORIENTED_EDGE('',*,*,#12687,.F.); +#12736 = ORIENTED_EDGE('',*,*,#9201,.F.); +#12737 = ADVANCED_FACE('',(#12738),#8612,.F.); +#12738 = FACE_BOUND('',#12739,.F.); +#12739 = EDGE_LOOP('',(#12740,#12761,#12762,#12763)); +#12740 = ORIENTED_EDGE('',*,*,#12741,.T.); +#12741 = EDGE_CURVE('',#9156,#8569,#12742,.T.); +#12742 = SURFACE_CURVE('',#12743,(#12747,#12754),.PCURVE_S1.); +#12743 = LINE('',#12744,#12745); +#12744 = CARTESIAN_POINT('',(3.,-1.065,0.2)); +#12745 = VECTOR('',#12746,1.); +#12746 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#12747 = PCURVE('',#8612,#12748); +#12748 = DEFINITIONAL_REPRESENTATION('',(#12749),#12753); +#12749 = LINE('',#12750,#12751); +#12750 = CARTESIAN_POINT('',(-0.,0.)); +#12751 = VECTOR('',#12752,1.); +#12752 = DIRECTION('',(0.,-1.)); +#12753 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12754 = PCURVE('',#8584,#12755); +#12755 = DEFINITIONAL_REPRESENTATION('',(#12756),#12760); +#12756 = LINE('',#12757,#12758); +#12757 = CARTESIAN_POINT('',(0.2,0.)); +#12758 = VECTOR('',#12759,1.); +#12759 = DIRECTION('',(0.,-1.)); +#12760 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12761 = ORIENTED_EDGE('',*,*,#8596,.T.); +#12762 = ORIENTED_EDGE('',*,*,#12714,.F.); +#12763 = ORIENTED_EDGE('',*,*,#9178,.F.); +#12764 = ADVANCED_FACE('',(#12765),#8584,.F.); +#12765 = FACE_BOUND('',#12766,.F.); +#12766 = EDGE_LOOP('',(#12767,#12788,#12789,#12790)); +#12767 = ORIENTED_EDGE('',*,*,#12768,.T.); +#12768 = EDGE_CURVE('',#9133,#8541,#12769,.T.); +#12769 = SURFACE_CURVE('',#12770,(#12774,#12781),.PCURVE_S1.); +#12770 = LINE('',#12771,#12772); +#12771 = CARTESIAN_POINT('',(3.,-1.065,5.551115123126E-17)); +#12772 = VECTOR('',#12773,1.); +#12773 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#12774 = PCURVE('',#8584,#12775); +#12775 = DEFINITIONAL_REPRESENTATION('',(#12776),#12780); +#12776 = LINE('',#12777,#12778); +#12777 = CARTESIAN_POINT('',(0.,0.)); +#12778 = VECTOR('',#12779,1.); +#12779 = DIRECTION('',(0.,-1.)); +#12780 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12781 = PCURVE('',#8556,#12782); +#12782 = DEFINITIONAL_REPRESENTATION('',(#12783),#12787); +#12783 = LINE('',#12784,#12785); +#12784 = CARTESIAN_POINT('',(0.35,-7.771561172375E-17)); +#12785 = VECTOR('',#12786,1.); +#12786 = DIRECTION('',(0.,-1.)); +#12787 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12788 = ORIENTED_EDGE('',*,*,#8568,.T.); +#12789 = ORIENTED_EDGE('',*,*,#12741,.F.); +#12790 = ORIENTED_EDGE('',*,*,#9155,.F.); +#12791 = ADVANCED_FACE('',(#12792),#8556,.F.); +#12792 = FACE_BOUND('',#12793,.F.); +#12793 = EDGE_LOOP('',(#12794,#12815,#12816,#12817)); +#12794 = ORIENTED_EDGE('',*,*,#12795,.T.); +#12795 = EDGE_CURVE('',#9109,#8512,#12796,.T.); +#12796 = SURFACE_CURVE('',#12797,(#12801,#12808),.PCURVE_S1.); +#12797 = LINE('',#12798,#12799); +#12798 = CARTESIAN_POINT('',(2.65,-1.065,5.551115123126E-17)); +#12799 = VECTOR('',#12800,1.); +#12800 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#12801 = PCURVE('',#8556,#12802); +#12802 = DEFINITIONAL_REPRESENTATION('',(#12803),#12807); +#12803 = LINE('',#12804,#12805); +#12804 = CARTESIAN_POINT('',(0.,0.)); +#12805 = VECTOR('',#12806,1.); +#12806 = DIRECTION('',(0.,-1.)); +#12807 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12808 = PCURVE('',#8528,#12809); +#12809 = DEFINITIONAL_REPRESENTATION('',(#12810),#12814); +#12810 = LINE('',#12811,#12812); +#12811 = CARTESIAN_POINT('',(4.712388980385,0.)); +#12812 = VECTOR('',#12813,1.); +#12813 = DIRECTION('',(0.,-1.)); +#12814 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12815 = ORIENTED_EDGE('',*,*,#8540,.T.); +#12816 = ORIENTED_EDGE('',*,*,#12768,.F.); +#12817 = ORIENTED_EDGE('',*,*,#9132,.F.); +#12818 = ADVANCED_FACE('',(#12819),#8528,.T.); +#12819 = FACE_BOUND('',#12820,.T.); +#12820 = EDGE_LOOP('',(#12821,#12822,#12823,#12824)); +#12821 = ORIENTED_EDGE('',*,*,#9108,.T.); +#12822 = ORIENTED_EDGE('',*,*,#12795,.T.); +#12823 = ORIENTED_EDGE('',*,*,#8511,.F.); +#12824 = ORIENTED_EDGE('',*,*,#12825,.F.); +#12825 = EDGE_CURVE('',#9086,#8484,#12826,.T.); +#12826 = SURFACE_CURVE('',#12827,(#12831,#12838),.PCURVE_S1.); +#12827 = LINE('',#12828,#12829); +#12828 = CARTESIAN_POINT('',(2.35,-1.065,0.3)); +#12829 = VECTOR('',#12830,1.); +#12830 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#12831 = PCURVE('',#8528,#12832); +#12832 = DEFINITIONAL_REPRESENTATION('',(#12833),#12837); +#12833 = LINE('',#12834,#12835); +#12834 = CARTESIAN_POINT('',(6.28318530718,2.22044604925E-16)); +#12835 = VECTOR('',#12836,1.); +#12836 = DIRECTION('',(0.,-1.)); +#12837 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12838 = PCURVE('',#8499,#12839); +#12839 = DEFINITIONAL_REPRESENTATION('',(#12840),#12844); +#12840 = LINE('',#12841,#12842); +#12841 = CARTESIAN_POINT('',(0.425,-9.860761315258E-32)); +#12842 = VECTOR('',#12843,1.); +#12843 = DIRECTION('',(7.584527938158E-44,-1.)); +#12844 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12845 = ADVANCED_FACE('',(#12846),#8499,.F.); +#12846 = FACE_BOUND('',#12847,.F.); +#12847 = EDGE_LOOP('',(#12848,#12849,#12850,#12851)); +#12848 = ORIENTED_EDGE('',*,*,#9302,.T.); +#12849 = ORIENTED_EDGE('',*,*,#8483,.T.); +#12850 = ORIENTED_EDGE('',*,*,#12825,.F.); +#12851 = ORIENTED_EDGE('',*,*,#9085,.F.); +#12852 = ADVANCED_FACE('',(#12853),#9621,.T.); +#12853 = FACE_BOUND('',#12854,.T.); +#12854 = EDGE_LOOP('',(#12855,#12856,#12857,#12858)); +#12855 = ORIENTED_EDGE('',*,*,#9604,.T.); +#12856 = ORIENTED_EDGE('',*,*,#10474,.T.); +#12857 = ORIENTED_EDGE('',*,*,#9854,.F.); +#12858 = ORIENTED_EDGE('',*,*,#12859,.F.); +#12859 = EDGE_CURVE('',#9577,#9832,#12860,.T.); +#12860 = SURFACE_CURVE('',#12861,(#12865,#12872),.PCURVE_S1.); +#12861 = LINE('',#12862,#12863); +#12862 = CARTESIAN_POINT('',(2.55,0.205,0.725)); +#12863 = VECTOR('',#12864,1.); +#12864 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#12865 = PCURVE('',#9621,#12866); +#12866 = DEFINITIONAL_REPRESENTATION('',(#12867),#12871); +#12867 = LINE('',#12868,#12869); +#12868 = CARTESIAN_POINT('',(6.28318530718,-5.551115123126E-17)); +#12869 = VECTOR('',#12870,1.); +#12870 = DIRECTION('',(0.,-1.)); +#12871 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12872 = PCURVE('',#9592,#12873); +#12873 = DEFINITIONAL_REPRESENTATION('',(#12874),#12878); +#12874 = LINE('',#12875,#12876); +#12875 = CARTESIAN_POINT('',(0.425,0.)); +#12876 = VECTOR('',#12877,1.); +#12877 = DIRECTION('',(0.,-1.)); +#12878 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12879 = ADVANCED_FACE('',(#12880),#9592,.F.); +#12880 = FACE_BOUND('',#12881,.F.); +#12881 = EDGE_LOOP('',(#12882,#12903,#12904,#12905)); +#12882 = ORIENTED_EDGE('',*,*,#12883,.T.); +#12883 = EDGE_CURVE('',#9544,#9804,#12884,.T.); +#12884 = SURFACE_CURVE('',#12885,(#12889,#12896),.PCURVE_S1.); +#12885 = LINE('',#12886,#12887); +#12886 = CARTESIAN_POINT('',(2.55,0.205,0.3)); +#12887 = VECTOR('',#12888,1.); +#12888 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#12889 = PCURVE('',#9592,#12890); +#12890 = DEFINITIONAL_REPRESENTATION('',(#12891),#12895); +#12891 = LINE('',#12892,#12893); +#12892 = CARTESIAN_POINT('',(0.,0.)); +#12893 = VECTOR('',#12894,1.); +#12894 = DIRECTION('',(0.,-1.)); +#12895 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12896 = PCURVE('',#9564,#12897); +#12897 = DEFINITIONAL_REPRESENTATION('',(#12898),#12902); +#12898 = LINE('',#12899,#12900); +#12899 = CARTESIAN_POINT('',(1.570796326795,2.775557561563E-17)); +#12900 = VECTOR('',#12901,1.); +#12901 = DIRECTION('',(0.,-1.)); +#12902 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12903 = ORIENTED_EDGE('',*,*,#9831,.T.); +#12904 = ORIENTED_EDGE('',*,*,#12859,.F.); +#12905 = ORIENTED_EDGE('',*,*,#9576,.F.); +#12906 = ADVANCED_FACE('',(#12907),#9564,.F.); +#12907 = FACE_BOUND('',#12908,.F.); +#12908 = EDGE_LOOP('',(#12909,#12930,#12931,#12932)); +#12909 = ORIENTED_EDGE('',*,*,#12910,.T.); +#12910 = EDGE_CURVE('',#9516,#9781,#12911,.T.); +#12911 = SURFACE_CURVE('',#12912,(#12916,#12923),.PCURVE_S1.); +#12912 = LINE('',#12913,#12914); +#12913 = CARTESIAN_POINT('',(2.65,0.205,0.2)); +#12914 = VECTOR('',#12915,1.); +#12915 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#12916 = PCURVE('',#9564,#12917); +#12917 = DEFINITIONAL_REPRESENTATION('',(#12918),#12922); +#12918 = LINE('',#12919,#12920); +#12919 = CARTESIAN_POINT('',(0.,0.)); +#12920 = VECTOR('',#12921,1.); +#12921 = DIRECTION('',(0.,-1.)); +#12922 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12923 = PCURVE('',#9531,#12924); +#12924 = DEFINITIONAL_REPRESENTATION('',(#12925),#12929); +#12925 = LINE('',#12926,#12927); +#12926 = CARTESIAN_POINT('',(0.35,7.771561172375E-17)); +#12927 = VECTOR('',#12928,1.); +#12928 = DIRECTION('',(0.,-1.)); +#12929 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12930 = ORIENTED_EDGE('',*,*,#9803,.T.); +#12931 = ORIENTED_EDGE('',*,*,#12883,.F.); +#12932 = ORIENTED_EDGE('',*,*,#9543,.F.); +#12933 = ADVANCED_FACE('',(#12934),#9531,.F.); +#12934 = FACE_BOUND('',#12935,.F.); +#12935 = EDGE_LOOP('',(#12936,#12957,#12958,#12959)); +#12936 = ORIENTED_EDGE('',*,*,#12937,.T.); +#12937 = EDGE_CURVE('',#9488,#9758,#12938,.T.); +#12938 = SURFACE_CURVE('',#12939,(#12943,#12950),.PCURVE_S1.); +#12939 = LINE('',#12940,#12941); +#12940 = CARTESIAN_POINT('',(3.,0.205,0.2)); +#12941 = VECTOR('',#12942,1.); +#12942 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#12943 = PCURVE('',#9531,#12944); +#12944 = DEFINITIONAL_REPRESENTATION('',(#12945),#12949); +#12945 = LINE('',#12946,#12947); +#12946 = CARTESIAN_POINT('',(-0.,0.)); +#12947 = VECTOR('',#12948,1.); +#12948 = DIRECTION('',(0.,-1.)); +#12949 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12950 = PCURVE('',#9503,#12951); +#12951 = DEFINITIONAL_REPRESENTATION('',(#12952),#12956); +#12952 = LINE('',#12953,#12954); +#12953 = CARTESIAN_POINT('',(0.2,0.)); +#12954 = VECTOR('',#12955,1.); +#12955 = DIRECTION('',(0.,-1.)); +#12956 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12957 = ORIENTED_EDGE('',*,*,#9780,.T.); +#12958 = ORIENTED_EDGE('',*,*,#12910,.F.); +#12959 = ORIENTED_EDGE('',*,*,#9515,.F.); +#12960 = ADVANCED_FACE('',(#12961),#9503,.F.); +#12961 = FACE_BOUND('',#12962,.F.); +#12962 = EDGE_LOOP('',(#12963,#12984,#12985,#12986)); +#12963 = ORIENTED_EDGE('',*,*,#12964,.T.); +#12964 = EDGE_CURVE('',#9460,#9735,#12965,.T.); +#12965 = SURFACE_CURVE('',#12966,(#12970,#12977),.PCURVE_S1.); +#12966 = LINE('',#12967,#12968); +#12967 = CARTESIAN_POINT('',(3.,0.205,5.551115123126E-17)); +#12968 = VECTOR('',#12969,1.); +#12969 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#12970 = PCURVE('',#9503,#12971); +#12971 = DEFINITIONAL_REPRESENTATION('',(#12972),#12976); +#12972 = LINE('',#12973,#12974); +#12973 = CARTESIAN_POINT('',(0.,0.)); +#12974 = VECTOR('',#12975,1.); +#12975 = DIRECTION('',(0.,-1.)); +#12976 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12977 = PCURVE('',#9475,#12978); +#12978 = DEFINITIONAL_REPRESENTATION('',(#12979),#12983); +#12979 = LINE('',#12980,#12981); +#12980 = CARTESIAN_POINT('',(0.35,-7.771561172375E-17)); +#12981 = VECTOR('',#12982,1.); +#12982 = DIRECTION('',(0.,-1.)); +#12983 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#12984 = ORIENTED_EDGE('',*,*,#9757,.T.); +#12985 = ORIENTED_EDGE('',*,*,#12937,.F.); +#12986 = ORIENTED_EDGE('',*,*,#9487,.F.); +#12987 = ADVANCED_FACE('',(#12988),#9475,.F.); +#12988 = FACE_BOUND('',#12989,.F.); +#12989 = EDGE_LOOP('',(#12990,#13011,#13012,#13013)); +#12990 = ORIENTED_EDGE('',*,*,#12991,.T.); +#12991 = EDGE_CURVE('',#9431,#9711,#12992,.T.); +#12992 = SURFACE_CURVE('',#12993,(#12997,#13004),.PCURVE_S1.); +#12993 = LINE('',#12994,#12995); +#12994 = CARTESIAN_POINT('',(2.65,0.205,5.551115123126E-17)); +#12995 = VECTOR('',#12996,1.); +#12996 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#12997 = PCURVE('',#9475,#12998); +#12998 = DEFINITIONAL_REPRESENTATION('',(#12999),#13003); +#12999 = LINE('',#13000,#13001); +#13000 = CARTESIAN_POINT('',(0.,0.)); +#13001 = VECTOR('',#13002,1.); +#13002 = DIRECTION('',(0.,-1.)); +#13003 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13004 = PCURVE('',#9447,#13005); +#13005 = DEFINITIONAL_REPRESENTATION('',(#13006),#13010); +#13006 = LINE('',#13007,#13008); +#13007 = CARTESIAN_POINT('',(4.712388980385,0.)); +#13008 = VECTOR('',#13009,1.); +#13009 = DIRECTION('',(0.,-1.)); +#13010 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13011 = ORIENTED_EDGE('',*,*,#9734,.T.); +#13012 = ORIENTED_EDGE('',*,*,#12964,.F.); +#13013 = ORIENTED_EDGE('',*,*,#9459,.F.); +#13014 = ADVANCED_FACE('',(#13015),#9447,.T.); +#13015 = FACE_BOUND('',#13016,.T.); +#13016 = EDGE_LOOP('',(#13017,#13018,#13019,#13020)); +#13017 = ORIENTED_EDGE('',*,*,#9430,.T.); +#13018 = ORIENTED_EDGE('',*,*,#12991,.T.); +#13019 = ORIENTED_EDGE('',*,*,#9710,.F.); +#13020 = ORIENTED_EDGE('',*,*,#13021,.F.); +#13021 = EDGE_CURVE('',#9403,#9688,#13022,.T.); +#13022 = SURFACE_CURVE('',#13023,(#13027,#13034),.PCURVE_S1.); +#13023 = LINE('',#13024,#13025); +#13024 = CARTESIAN_POINT('',(2.35,0.205,0.3)); +#13025 = VECTOR('',#13026,1.); +#13026 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#13027 = PCURVE('',#9447,#13028); +#13028 = DEFINITIONAL_REPRESENTATION('',(#13029),#13033); +#13029 = LINE('',#13030,#13031); +#13030 = CARTESIAN_POINT('',(6.28318530718,5.551115123126E-17)); +#13031 = VECTOR('',#13032,1.); +#13032 = DIRECTION('',(0.,-1.)); +#13033 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13034 = PCURVE('',#9418,#13035); +#13035 = DEFINITIONAL_REPRESENTATION('',(#13036),#13040); +#13036 = LINE('',#13037,#13038); +#13037 = CARTESIAN_POINT('',(0.425,-9.860761315258E-32)); +#13038 = VECTOR('',#13039,1.); +#13039 = DIRECTION('',(7.584527938158E-44,-1.)); +#13040 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13041 = ADVANCED_FACE('',(#13042),#9418,.F.); +#13042 = FACE_BOUND('',#13043,.F.); +#13043 = EDGE_LOOP('',(#13044,#13045,#13046,#13047)); +#13044 = ORIENTED_EDGE('',*,*,#9949,.T.); +#13045 = ORIENTED_EDGE('',*,*,#9687,.T.); +#13046 = ORIENTED_EDGE('',*,*,#13021,.F.); +#13047 = ORIENTED_EDGE('',*,*,#9402,.F.); +#13048 = ADVANCED_FACE('',(#13049),#10011,.F.); +#13049 = FACE_BOUND('',#13050,.F.); +#13050 = EDGE_LOOP('',(#13051,#13052,#13053,#13075)); +#13051 = ORIENTED_EDGE('',*,*,#10028,.T.); +#13052 = ORIENTED_EDGE('',*,*,#9998,.T.); +#13053 = ORIENTED_EDGE('',*,*,#13054,.F.); +#13054 = EDGE_CURVE('',#13055,#9977,#13057,.T.); +#13055 = VERTEX_POINT('',#13056); +#13056 = CARTESIAN_POINT('',(-1.7375,4.275,1.025)); +#13057 = SURFACE_CURVE('',#13058,(#13062,#13068),.PCURVE_S1.); +#13058 = LINE('',#13059,#13060); +#13059 = CARTESIAN_POINT('',(-1.7375,4.275,1.025)); +#13060 = VECTOR('',#13061,1.); +#13061 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#13062 = PCURVE('',#10011,#13063); +#13063 = DEFINITIONAL_REPRESENTATION('',(#13064),#13067); +#13064 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13065,#13066),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,3.475),.PIECEWISE_BEZIER_KNOTS.); +#13065 = CARTESIAN_POINT('',(-3.280948355558E-16,1.)); +#13066 = CARTESIAN_POINT('',(3.55,1.)); +#13067 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13068 = PCURVE('',#10109,#13069); +#13069 = DEFINITIONAL_REPRESENTATION('',(#13070),#13074); +#13070 = LINE('',#13071,#13072); +#13071 = CARTESIAN_POINT('',(1.10407393921E-16,9.850164341594E-17)); +#13072 = VECTOR('',#13073,1.); +#13073 = DIRECTION('',(1.,-2.293642417574E-17)); +#13074 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13075 = ORIENTED_EDGE('',*,*,#13076,.F.); +#13076 = EDGE_CURVE('',#10029,#13055,#13077,.T.); +#13077 = SURFACE_CURVE('',#13078,(#13081,#13088),.PCURVE_S1.); +#13078 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13079,#13080),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#13079 = CARTESIAN_POINT('',(-1.775,4.35,1.025)); +#13080 = CARTESIAN_POINT('',(-1.7375,4.275,1.025)); +#13081 = PCURVE('',#10011,#13082); +#13082 = DEFINITIONAL_REPRESENTATION('',(#13083),#13087); +#13083 = LINE('',#13084,#13085); +#13084 = CARTESIAN_POINT('',(3.564514819754E-17,1.042859870759E-15)); +#13085 = VECTOR('',#13086,1.); +#13086 = DIRECTION('',(-1.369030492256E-16,1.)); +#13087 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13088 = PCURVE('',#12030,#13089); +#13089 = DEFINITIONAL_REPRESENTATION('',(#13090),#13094); +#13090 = LINE('',#13091,#13092); +#13091 = CARTESIAN_POINT('',(0.247487373415,-4.720042819535E-15)); +#13092 = VECTOR('',#13093,1.); +#13093 = DIRECTION('',(-1.387778780781E-16,1.)); +#13094 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13095 = ADVANCED_FACE('',(#13096),#10109,.F.); +#13096 = FACE_BOUND('',#13097,.F.); +#13097 = EDGE_LOOP('',(#13098,#13099,#13100,#13101)); +#13098 = ORIENTED_EDGE('',*,*,#13054,.T.); +#13099 = ORIENTED_EDGE('',*,*,#10096,.T.); +#13100 = ORIENTED_EDGE('',*,*,#10124,.F.); +#13101 = ORIENTED_EDGE('',*,*,#13102,.F.); +#13102 = EDGE_CURVE('',#13055,#10125,#13103,.T.); +#13103 = SURFACE_CURVE('',#13104,(#13107,#13114),.PCURVE_S1.); +#13104 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13105,#13106),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#13105 = CARTESIAN_POINT('',(-1.7375,4.275,1.025)); +#13106 = CARTESIAN_POINT('',(-1.680085640382,4.160171280765,1.75)); +#13107 = PCURVE('',#10109,#13108); +#13108 = DEFINITIONAL_REPRESENTATION('',(#13109),#13113); +#13109 = LINE('',#13110,#13111); +#13110 = CARTESIAN_POINT('',(1.10407393921E-16,9.850164341594E-17)); +#13111 = VECTOR('',#13112,1.); +#13112 = DIRECTION('',(1.534973222091E-16,1.)); +#13113 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13114 = PCURVE('',#10162,#13115); +#13115 = DEFINITIONAL_REPRESENTATION('',(#13116),#13120); +#13116 = LINE('',#13117,#13118); +#13117 = CARTESIAN_POINT('',(0.194454364826,-9.958942974993E-18)); +#13118 = VECTOR('',#13119,1.); +#13119 = DIRECTION('',(-2.498001805407E-16,1.)); +#13120 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13121 = ADVANCED_FACE('',(#13122),#10162,.F.); +#13122 = FACE_BOUND('',#13123,.F.); +#13123 = EDGE_LOOP('',(#13124,#13146,#13147,#13148)); +#13124 = ORIENTED_EDGE('',*,*,#13125,.T.); +#13125 = EDGE_CURVE('',#13126,#13055,#13128,.T.); +#13126 = VERTEX_POINT('',#13127); +#13127 = CARTESIAN_POINT('',(-1.875,4.1375,1.025)); +#13128 = SURFACE_CURVE('',#13129,(#13133,#13140),.PCURVE_S1.); +#13129 = LINE('',#13130,#13131); +#13130 = CARTESIAN_POINT('',(-1.875,4.1375,1.025)); +#13131 = VECTOR('',#13132,1.); +#13132 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#13133 = PCURVE('',#10162,#13134); +#13134 = DEFINITIONAL_REPRESENTATION('',(#13135),#13139); +#13135 = LINE('',#13136,#13137); +#13136 = CARTESIAN_POINT('',(-6.086888979784E-16,2.525109798792E-16)); +#13137 = VECTOR('',#13138,1.); +#13138 = DIRECTION('',(1.,-1.349776453149E-15)); +#13139 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13140 = PCURVE('',#12030,#13141); +#13141 = DEFINITIONAL_REPRESENTATION('',(#13142),#13145); +#13142 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13143,#13144),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,0.194454364826),.PIECEWISE_BEZIER_KNOTS.); +#13143 = CARTESIAN_POINT('',(-1.099004758388E-15,1.)); +#13144 = CARTESIAN_POINT('',(0.247487373415,1.)); +#13145 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13146 = ORIENTED_EDGE('',*,*,#13102,.T.); +#13147 = ORIENTED_EDGE('',*,*,#10146,.F.); +#13148 = ORIENTED_EDGE('',*,*,#13149,.F.); +#13149 = EDGE_CURVE('',#13126,#10147,#13150,.T.); +#13150 = SURFACE_CURVE('',#13151,(#13154,#13161),.PCURVE_S1.); +#13151 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13152,#13153),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#13152 = CARTESIAN_POINT('',(-1.875,4.1375,1.025)); +#13153 = CARTESIAN_POINT('',(-1.760171280765,4.080085640382,1.75)); +#13154 = PCURVE('',#10162,#13155); +#13155 = DEFINITIONAL_REPRESENTATION('',(#13156),#13160); +#13156 = LINE('',#13157,#13158); +#13157 = CARTESIAN_POINT('',(-6.086888979784E-16,2.525109798792E-16)); +#13158 = VECTOR('',#13159,1.); +#13159 = DIRECTION('',(4.820002967903E-16,1.)); +#13160 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13161 = PCURVE('',#10189,#13162); +#13162 = DEFINITIONAL_REPRESENTATION('',(#13163),#13167); +#13163 = LINE('',#13164,#13165); +#13164 = CARTESIAN_POINT('',(8.275,1.381543802881E-16)); +#13165 = VECTOR('',#13166,1.); +#13166 = DIRECTION('',(0.,1.)); +#13167 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13168 = ADVANCED_FACE('',(#13169),#10189,.F.); +#13169 = FACE_BOUND('',#13170,.F.); +#13170 = EDGE_LOOP('',(#13171,#13195,#13223,#13245,#13273,#13295,#13323, + #13345,#13373,#13395,#13423,#13445,#13473,#13495,#13523,#13543, + #13544,#13545)); +#13171 = ORIENTED_EDGE('',*,*,#13172,.T.); +#13172 = EDGE_CURVE('',#13173,#13175,#13177,.T.); +#13173 = VERTEX_POINT('',#13174); +#13174 = CARTESIAN_POINT('',(-1.875,-4.1375,1.025)); +#13175 = VERTEX_POINT('',#13176); +#13176 = CARTESIAN_POINT('',(-1.875,-4.015,1.025)); +#13177 = SURFACE_CURVE('',#13178,(#13182,#13189),.PCURVE_S1.); +#13178 = LINE('',#13179,#13180); +#13179 = CARTESIAN_POINT('',(-1.875,-4.1375,1.025)); +#13180 = VECTOR('',#13181,1.); +#13181 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#13182 = PCURVE('',#10189,#13183); +#13183 = DEFINITIONAL_REPRESENTATION('',(#13184),#13188); +#13184 = LINE('',#13185,#13186); +#13185 = CARTESIAN_POINT('',(-1.516666002792E-16,-4.780697711218E-17)); +#13186 = VECTOR('',#13187,1.); +#13187 = DIRECTION('',(1.,1.807578795803E-15)); +#13188 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13189 = PCURVE('',#10873,#13190); +#13190 = DEFINITIONAL_REPRESENTATION('',(#13191),#13194); +#13191 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13192,#13193),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,0.1225),.PIECEWISE_BEZIER_KNOTS.); +#13192 = CARTESIAN_POINT('',(7.537826990421E-17,1.)); +#13193 = CARTESIAN_POINT('',(0.123610271903,1.)); +#13194 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13195 = ORIENTED_EDGE('',*,*,#13196,.T.); +#13196 = EDGE_CURVE('',#13175,#13197,#13199,.T.); +#13197 = VERTEX_POINT('',#13198); +#13198 = CARTESIAN_POINT('',(-1.875,-3.605,1.025)); +#13199 = SURFACE_CURVE('',#13200,(#13204,#13211),.PCURVE_S1.); +#13200 = LINE('',#13201,#13202); +#13201 = CARTESIAN_POINT('',(-1.875,-4.1375,1.025)); +#13202 = VECTOR('',#13203,1.); +#13203 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#13204 = PCURVE('',#10189,#13205); +#13205 = DEFINITIONAL_REPRESENTATION('',(#13206),#13210); +#13206 = LINE('',#13207,#13208); +#13207 = CARTESIAN_POINT('',(3.608224830032E-16,2.018979276672E-16)); +#13208 = VECTOR('',#13209,1.); +#13209 = DIRECTION('',(1.,-2.308285901505E-16)); +#13210 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13211 = PCURVE('',#13212,#13217); +#13212 = PLANE('',#13213); +#13213 = AXIS2_PLACEMENT_3D('',#13214,#13215,#13216); +#13214 = CARTESIAN_POINT('',(-2.25,-4.015,1.025)); +#13215 = DIRECTION('',(-0.,0.,-1.)); +#13216 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#13217 = DEFINITIONAL_REPRESENTATION('',(#13218),#13222); +#13218 = LINE('',#13219,#13220); +#13219 = CARTESIAN_POINT('',(0.375,0.1225)); +#13220 = VECTOR('',#13221,1.); +#13221 = DIRECTION('',(-1.224646799147E-16,-1.)); +#13222 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13223 = ORIENTED_EDGE('',*,*,#13224,.T.); +#13224 = EDGE_CURVE('',#13197,#13225,#13227,.T.); +#13225 = VERTEX_POINT('',#13226); +#13226 = CARTESIAN_POINT('',(-1.875,-2.745,1.025)); +#13227 = SURFACE_CURVE('',#13228,(#13232,#13239),.PCURVE_S1.); +#13228 = LINE('',#13229,#13230); +#13229 = CARTESIAN_POINT('',(-1.875,-4.1375,1.025)); +#13230 = VECTOR('',#13231,1.); +#13231 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#13232 = PCURVE('',#10189,#13233); +#13233 = DEFINITIONAL_REPRESENTATION('',(#13234),#13238); +#13234 = LINE('',#13235,#13236); +#13235 = CARTESIAN_POINT('',(2.22044604925E-16,2.364277418874E-18)); +#13236 = VECTOR('',#13237,1.); +#13237 = DIRECTION('',(1.,5.501662458691E-17)); +#13238 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13239 = PCURVE('',#11194,#13240); +#13240 = DEFINITIONAL_REPRESENTATION('',(#13241),#13244); +#13241 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13242,#13243),.UNSPECIFIED., + .F.,.F.,(2,2),(0.5325,1.3925),.PIECEWISE_BEZIER_KNOTS.); +#13242 = CARTESIAN_POINT('',(0.537326283988,1.)); +#13243 = CARTESIAN_POINT('',(1.405120845921,1.)); +#13244 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13245 = ORIENTED_EDGE('',*,*,#13246,.T.); +#13246 = EDGE_CURVE('',#13225,#13247,#13249,.T.); +#13247 = VERTEX_POINT('',#13248); +#13248 = CARTESIAN_POINT('',(-1.875,-2.335,1.025)); +#13249 = SURFACE_CURVE('',#13250,(#13254,#13261),.PCURVE_S1.); +#13250 = LINE('',#13251,#13252); +#13251 = CARTESIAN_POINT('',(-1.875,-4.1375,1.025)); +#13252 = VECTOR('',#13253,1.); +#13253 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#13254 = PCURVE('',#10189,#13255); +#13255 = DEFINITIONAL_REPRESENTATION('',(#13256),#13260); +#13256 = LINE('',#13257,#13258); +#13257 = CARTESIAN_POINT('',(0.,1.92364141861E-16)); +#13258 = VECTOR('',#13259,1.); +#13259 = DIRECTION('',(1.,-1.154113379572E-16)); +#13260 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13261 = PCURVE('',#13262,#13267); +#13262 = PLANE('',#13263); +#13263 = AXIS2_PLACEMENT_3D('',#13264,#13265,#13266); +#13264 = CARTESIAN_POINT('',(-2.25,-2.745,1.025)); +#13265 = DIRECTION('',(-0.,0.,-1.)); +#13266 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#13267 = DEFINITIONAL_REPRESENTATION('',(#13268),#13272); +#13268 = LINE('',#13269,#13270); +#13269 = CARTESIAN_POINT('',(0.375,1.3925)); +#13270 = VECTOR('',#13271,1.); +#13271 = DIRECTION('',(-1.224646799147E-16,-1.)); +#13272 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13273 = ORIENTED_EDGE('',*,*,#13274,.T.); +#13274 = EDGE_CURVE('',#13247,#13275,#13277,.T.); +#13275 = VERTEX_POINT('',#13276); +#13276 = CARTESIAN_POINT('',(-1.875,-1.475,1.025)); +#13277 = SURFACE_CURVE('',#13278,(#13282,#13289),.PCURVE_S1.); +#13278 = LINE('',#13279,#13280); +#13279 = CARTESIAN_POINT('',(-1.875,-4.1375,1.025)); +#13280 = VECTOR('',#13281,1.); +#13281 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#13282 = PCURVE('',#10189,#13283); +#13283 = DEFINITIONAL_REPRESENTATION('',(#13284),#13288); +#13284 = LINE('',#13285,#13286); +#13285 = CARTESIAN_POINT('',(0.,-1.102978213277E-16)); +#13286 = VECTOR('',#13287,1.); +#13287 = DIRECTION('',(1.,-5.059795039418E-21)); +#13288 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13289 = PCURVE('',#11518,#13290); +#13290 = DEFINITIONAL_REPRESENTATION('',(#13291),#13294); +#13291 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13292,#13293),.UNSPECIFIED., + .F.,.F.,(2,2),(1.8025,2.6625),.PIECEWISE_BEZIER_KNOTS.); +#13292 = CARTESIAN_POINT('',(1.818836858006,1.)); +#13293 = CARTESIAN_POINT('',(2.68663141994,1.)); +#13294 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13295 = ORIENTED_EDGE('',*,*,#13296,.T.); +#13296 = EDGE_CURVE('',#13275,#13297,#13299,.T.); +#13297 = VERTEX_POINT('',#13298); +#13298 = CARTESIAN_POINT('',(-1.875,-1.065,1.025)); +#13299 = SURFACE_CURVE('',#13300,(#13304,#13311),.PCURVE_S1.); +#13300 = LINE('',#13301,#13302); +#13301 = CARTESIAN_POINT('',(-1.875,-4.1375,1.025)); +#13302 = VECTOR('',#13303,1.); +#13303 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#13304 = PCURVE('',#10189,#13305); +#13305 = DEFINITIONAL_REPRESENTATION('',(#13306),#13310); +#13306 = LINE('',#13307,#13308); +#13307 = CARTESIAN_POINT('',(0.,-8.195943121848E-16)); +#13308 = VECTOR('',#13309,1.); +#13309 = DIRECTION('',(1.,2.308510318691E-16)); +#13310 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13311 = PCURVE('',#13312,#13317); +#13312 = PLANE('',#13313); +#13313 = AXIS2_PLACEMENT_3D('',#13314,#13315,#13316); +#13314 = CARTESIAN_POINT('',(-2.25,-1.475,1.025)); +#13315 = DIRECTION('',(-0.,0.,-1.)); +#13316 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#13317 = DEFINITIONAL_REPRESENTATION('',(#13318),#13322); +#13318 = LINE('',#13319,#13320); +#13319 = CARTESIAN_POINT('',(0.375,2.6625)); +#13320 = VECTOR('',#13321,1.); +#13321 = DIRECTION('',(-1.224646799147E-16,-1.)); +#13322 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13323 = ORIENTED_EDGE('',*,*,#13324,.T.); +#13324 = EDGE_CURVE('',#13297,#13325,#13327,.T.); +#13325 = VERTEX_POINT('',#13326); +#13326 = CARTESIAN_POINT('',(-1.875,-0.205,1.025)); +#13327 = SURFACE_CURVE('',#13328,(#13332,#13339),.PCURVE_S1.); +#13328 = LINE('',#13329,#13330); +#13329 = CARTESIAN_POINT('',(-1.875,-4.1375,1.025)); +#13330 = VECTOR('',#13331,1.); +#13331 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#13332 = PCURVE('',#10189,#13333); +#13333 = DEFINITIONAL_REPRESENTATION('',(#13334),#13338); +#13334 = LINE('',#13335,#13336); +#13335 = CARTESIAN_POINT('',(0.,-2.04931117337E-16)); +#13336 = VECTOR('',#13337,1.); +#13337 = DIRECTION('',(1.,-5.059798615721E-21)); +#13338 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13339 = PCURVE('',#11842,#13340); +#13340 = DEFINITIONAL_REPRESENTATION('',(#13341),#13344); +#13341 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13342,#13343),.UNSPECIFIED., + .F.,.F.,(2,2),(3.0725,3.9325),.PIECEWISE_BEZIER_KNOTS.); +#13342 = CARTESIAN_POINT('',(3.100347432024,1.)); +#13343 = CARTESIAN_POINT('',(3.968141993958,1.)); +#13344 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13345 = ORIENTED_EDGE('',*,*,#13346,.T.); +#13346 = EDGE_CURVE('',#13325,#13347,#13349,.T.); +#13347 = VERTEX_POINT('',#13348); +#13348 = CARTESIAN_POINT('',(-1.875,0.205,1.025)); +#13349 = SURFACE_CURVE('',#13350,(#13354,#13361),.PCURVE_S1.); +#13350 = LINE('',#13351,#13352); +#13351 = CARTESIAN_POINT('',(-1.875,-4.1375,1.025)); +#13352 = VECTOR('',#13353,1.); +#13353 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#13354 = PCURVE('',#10189,#13355); +#13355 = DEFINITIONAL_REPRESENTATION('',(#13356),#13360); +#13356 = LINE('',#13357,#13358); +#13357 = CARTESIAN_POINT('',(0.,1.455899314452E-15)); +#13358 = VECTOR('',#13359,1.); +#13359 = DIRECTION('',(1.,-3.824640942883E-16)); +#13360 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13361 = PCURVE('',#13362,#13367); +#13362 = PLANE('',#13363); +#13363 = AXIS2_PLACEMENT_3D('',#13364,#13365,#13366); +#13364 = CARTESIAN_POINT('',(-2.25,-0.205,1.025)); +#13365 = DIRECTION('',(-0.,0.,-1.)); +#13366 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#13367 = DEFINITIONAL_REPRESENTATION('',(#13368),#13372); +#13368 = LINE('',#13369,#13370); +#13369 = CARTESIAN_POINT('',(0.375,3.9325)); +#13370 = VECTOR('',#13371,1.); +#13371 = DIRECTION('',(-1.224646799147E-16,-1.)); +#13372 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13373 = ORIENTED_EDGE('',*,*,#13374,.T.); +#13374 = EDGE_CURVE('',#13347,#13375,#13377,.T.); +#13375 = VERTEX_POINT('',#13376); +#13376 = CARTESIAN_POINT('',(-1.875,1.065,1.025)); +#13377 = SURFACE_CURVE('',#13378,(#13382,#13389),.PCURVE_S1.); +#13378 = LINE('',#13379,#13380); +#13379 = CARTESIAN_POINT('',(-1.875,-4.1375,1.025)); +#13380 = VECTOR('',#13381,1.); +#13381 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#13382 = PCURVE('',#10189,#13383); +#13383 = DEFINITIONAL_REPRESENTATION('',(#13384),#13388); +#13384 = LINE('',#13385,#13386); +#13385 = CARTESIAN_POINT('',(0.,9.825916665413E-16)); +#13386 = VECTOR('',#13387,1.); +#13387 = DIRECTION('',(1.,-2.373592177037E-16)); +#13388 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13389 = PCURVE('',#11923,#13390); +#13390 = DEFINITIONAL_REPRESENTATION('',(#13391),#13394); +#13391 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13392,#13393),.UNSPECIFIED., + .F.,.F.,(2,2),(4.3425,5.2025),.PIECEWISE_BEZIER_KNOTS.); +#13392 = CARTESIAN_POINT('',(4.381858006042,1.)); +#13393 = CARTESIAN_POINT('',(5.249652567976,1.)); +#13394 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13395 = ORIENTED_EDGE('',*,*,#13396,.T.); +#13396 = EDGE_CURVE('',#13375,#13397,#13399,.T.); +#13397 = VERTEX_POINT('',#13398); +#13398 = CARTESIAN_POINT('',(-1.875,1.475,1.025)); +#13399 = SURFACE_CURVE('',#13400,(#13404,#13411),.PCURVE_S1.); +#13400 = LINE('',#13401,#13402); +#13401 = CARTESIAN_POINT('',(-1.875,-4.1375,1.025)); +#13402 = VECTOR('',#13403,1.); +#13403 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#13404 = PCURVE('',#10189,#13405); +#13405 = DEFINITIONAL_REPRESENTATION('',(#13406),#13410); +#13406 = LINE('',#13407,#13408); +#13407 = CARTESIAN_POINT('',(0.,2.447502462183E-15)); +#13408 = VECTOR('',#13409,1.); +#13409 = DIRECTION('',(1.,-4.978919597284E-16)); +#13410 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13411 = PCURVE('',#13412,#13417); +#13412 = PLANE('',#13413); +#13413 = AXIS2_PLACEMENT_3D('',#13414,#13415,#13416); +#13414 = CARTESIAN_POINT('',(-2.25,1.065,1.025)); +#13415 = DIRECTION('',(-0.,0.,-1.)); +#13416 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#13417 = DEFINITIONAL_REPRESENTATION('',(#13418),#13422); +#13418 = LINE('',#13419,#13420); +#13419 = CARTESIAN_POINT('',(0.375,5.2025)); +#13420 = VECTOR('',#13421,1.); +#13421 = DIRECTION('',(-1.224646799147E-16,-1.)); +#13422 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13423 = ORIENTED_EDGE('',*,*,#13424,.T.); +#13424 = EDGE_CURVE('',#13397,#13425,#13427,.T.); +#13425 = VERTEX_POINT('',#13426); +#13426 = CARTESIAN_POINT('',(-1.875,2.335,1.025)); +#13427 = SURFACE_CURVE('',#13428,(#13432,#13439),.PCURVE_S1.); +#13428 = LINE('',#13429,#13430); +#13429 = CARTESIAN_POINT('',(-1.875,-4.1375,1.025)); +#13430 = VECTOR('',#13431,1.); +#13431 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#13432 = PCURVE('',#10189,#13433); +#13433 = DEFINITIONAL_REPRESENTATION('',(#13434),#13438); +#13434 = LINE('',#13435,#13436); +#13435 = CARTESIAN_POINT('',(0.,1.209713189855E-16)); +#13436 = VECTOR('',#13437,1.); +#13437 = DIRECTION('',(1.,-7.228852542036E-17)); +#13438 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13439 = PCURVE('',#11599,#13440); +#13440 = DEFINITIONAL_REPRESENTATION('',(#13441),#13444); +#13441 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13442,#13443),.UNSPECIFIED., + .F.,.F.,(2,2),(5.6125,6.4725),.PIECEWISE_BEZIER_KNOTS.); +#13442 = CARTESIAN_POINT('',(5.66336858006,1.)); +#13443 = CARTESIAN_POINT('',(6.531163141994,1.)); +#13444 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13445 = ORIENTED_EDGE('',*,*,#13446,.T.); +#13446 = EDGE_CURVE('',#13425,#13447,#13449,.T.); +#13447 = VERTEX_POINT('',#13448); +#13448 = CARTESIAN_POINT('',(-1.875,2.745,1.025)); +#13449 = SURFACE_CURVE('',#13450,(#13454,#13461),.PCURVE_S1.); +#13450 = LINE('',#13451,#13452); +#13451 = CARTESIAN_POINT('',(-1.875,-4.1375,1.025)); +#13452 = VECTOR('',#13453,1.); +#13453 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#13454 = PCURVE('',#10189,#13455); +#13455 = DEFINITIONAL_REPRESENTATION('',(#13456),#13460); +#13456 = LINE('',#13457,#13458); +#13457 = CARTESIAN_POINT('',(0.,2.190712540518E-15)); +#13458 = VECTOR('',#13459,1.); +#13459 = DIRECTION('',(1.,-3.824581800632E-16)); +#13460 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13461 = PCURVE('',#13462,#13467); +#13462 = PLANE('',#13463); +#13463 = AXIS2_PLACEMENT_3D('',#13464,#13465,#13466); +#13464 = CARTESIAN_POINT('',(-2.25,2.335,1.025)); +#13465 = DIRECTION('',(-0.,0.,-1.)); +#13466 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#13467 = DEFINITIONAL_REPRESENTATION('',(#13468),#13472); +#13468 = LINE('',#13469,#13470); +#13469 = CARTESIAN_POINT('',(0.375,6.4725)); +#13470 = VECTOR('',#13471,1.); +#13471 = DIRECTION('',(-1.224646799147E-16,-1.)); +#13472 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13473 = ORIENTED_EDGE('',*,*,#13474,.T.); +#13474 = EDGE_CURVE('',#13447,#13475,#13477,.T.); +#13475 = VERTEX_POINT('',#13476); +#13476 = CARTESIAN_POINT('',(-1.875,3.605,1.025)); +#13477 = SURFACE_CURVE('',#13478,(#13482,#13489),.PCURVE_S1.); +#13478 = LINE('',#13479,#13480); +#13479 = CARTESIAN_POINT('',(-1.875,-4.1375,1.025)); +#13480 = VECTOR('',#13481,1.); +#13481 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#13482 = PCURVE('',#10189,#13483); +#13483 = DEFINITIONAL_REPRESENTATION('',(#13484),#13488); +#13484 = LINE('',#13485,#13486); +#13485 = CARTESIAN_POINT('',(0.,7.482229627071E-16)); +#13486 = VECTOR('',#13487,1.); +#13487 = DIRECTION('',(1.,-1.273023304261E-16)); +#13488 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13489 = PCURVE('',#11275,#13490); +#13490 = DEFINITIONAL_REPRESENTATION('',(#13491),#13494); +#13491 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13492,#13493),.UNSPECIFIED., + .F.,.F.,(2,2),(6.8825,7.7425),.PIECEWISE_BEZIER_KNOTS.); +#13492 = CARTESIAN_POINT('',(6.944879154079,1.)); +#13493 = CARTESIAN_POINT('',(7.812673716012,1.)); +#13494 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13495 = ORIENTED_EDGE('',*,*,#13496,.T.); +#13496 = EDGE_CURVE('',#13475,#13497,#13499,.T.); +#13497 = VERTEX_POINT('',#13498); +#13498 = CARTESIAN_POINT('',(-1.875,4.015,1.025)); +#13499 = SURFACE_CURVE('',#13500,(#13504,#13511),.PCURVE_S1.); +#13500 = LINE('',#13501,#13502); +#13501 = CARTESIAN_POINT('',(-1.875,-4.1375,1.025)); +#13502 = VECTOR('',#13503,1.); +#13503 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#13504 = PCURVE('',#10189,#13505); +#13505 = DEFINITIONAL_REPRESENTATION('',(#13506),#13510); +#13506 = LINE('',#13507,#13508); +#13507 = CARTESIAN_POINT('',(0.,-8.828774680769E-16)); +#13508 = VECTOR('',#13509,1.); +#13509 = DIRECTION('',(1.,7.917185954353E-17)); +#13510 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13511 = PCURVE('',#13512,#13517); +#13512 = PLANE('',#13513); +#13513 = AXIS2_PLACEMENT_3D('',#13514,#13515,#13516); +#13514 = CARTESIAN_POINT('',(-2.25,3.605,1.025)); +#13515 = DIRECTION('',(-0.,0.,-1.)); +#13516 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#13517 = DEFINITIONAL_REPRESENTATION('',(#13518),#13522); +#13518 = LINE('',#13519,#13520); +#13519 = CARTESIAN_POINT('',(0.375,7.7425)); +#13520 = VECTOR('',#13521,1.); +#13521 = DIRECTION('',(-1.224646799147E-16,-1.)); +#13522 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13523 = ORIENTED_EDGE('',*,*,#13524,.T.); +#13524 = EDGE_CURVE('',#13497,#13126,#13525,.T.); +#13525 = SURFACE_CURVE('',#13526,(#13530,#13537),.PCURVE_S1.); +#13526 = LINE('',#13527,#13528); +#13527 = CARTESIAN_POINT('',(-1.875,-4.1375,1.025)); +#13528 = VECTOR('',#13529,1.); +#13529 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#13530 = PCURVE('',#10189,#13531); +#13531 = DEFINITIONAL_REPRESENTATION('',(#13532),#13536); +#13532 = LINE('',#13533,#13534); +#13533 = CARTESIAN_POINT('',(0.,1.549009700243E-14)); +#13534 = VECTOR('',#13535,1.); +#13535 = DIRECTION('',(1.,-1.933149328491E-15)); +#13536 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13537 = PCURVE('',#10951,#13538); +#13538 = DEFINITIONAL_REPRESENTATION('',(#13539),#13542); +#13539 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13540,#13541),.UNSPECIFIED., + .F.,.F.,(2,2),(8.1525,8.275),.PIECEWISE_BEZIER_KNOTS.); +#13540 = CARTESIAN_POINT('',(8.226389728097,1.)); +#13541 = CARTESIAN_POINT('',(8.35,1.)); +#13542 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13543 = ORIENTED_EDGE('',*,*,#13149,.T.); +#13544 = ORIENTED_EDGE('',*,*,#10173,.F.); +#13545 = ORIENTED_EDGE('',*,*,#13546,.F.); +#13546 = EDGE_CURVE('',#13173,#10174,#13547,.T.); +#13547 = SURFACE_CURVE('',#13548,(#13551,#13558),.PCURVE_S1.); +#13548 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13549,#13550),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#13549 = CARTESIAN_POINT('',(-1.875,-4.1375,1.025)); +#13550 = CARTESIAN_POINT('',(-1.760171280765,-4.080085640382,1.75)); +#13551 = PCURVE('',#10189,#13552); +#13552 = DEFINITIONAL_REPRESENTATION('',(#13553),#13557); +#13553 = LINE('',#13554,#13555); +#13554 = CARTESIAN_POINT('',(-1.516666002792E-16,-4.780697711218E-17)); +#13555 = VECTOR('',#13556,1.); +#13556 = DIRECTION('',(-5.109882305183E-16,1.)); +#13557 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13558 = PCURVE('',#10216,#13559); +#13559 = DEFINITIONAL_REPRESENTATION('',(#13560),#13564); +#13560 = LINE('',#13561,#13562); +#13561 = CARTESIAN_POINT('',(0.194454364826,-9.971874260173E-18)); +#13562 = VECTOR('',#13563,1.); +#13563 = DIRECTION('',(-1.665334536938E-16,1.)); +#13564 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13565 = ADVANCED_FACE('',(#13566),#10216,.F.); +#13566 = FACE_BOUND('',#13567,.F.); +#13567 = EDGE_LOOP('',(#13568,#13590,#13591,#13592)); +#13568 = ORIENTED_EDGE('',*,*,#13569,.T.); +#13569 = EDGE_CURVE('',#13570,#13173,#13572,.T.); +#13570 = VERTEX_POINT('',#13571); +#13571 = CARTESIAN_POINT('',(-1.7375,-4.275,1.025)); +#13572 = SURFACE_CURVE('',#13573,(#13577,#13584),.PCURVE_S1.); +#13573 = LINE('',#13574,#13575); +#13574 = CARTESIAN_POINT('',(-1.7375,-4.275,1.025)); +#13575 = VECTOR('',#13576,1.); +#13576 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#13577 = PCURVE('',#10216,#13578); +#13578 = DEFINITIONAL_REPRESENTATION('',(#13579),#13583); +#13579 = LINE('',#13580,#13581); +#13580 = CARTESIAN_POINT('',(4.898011958237E-16,2.52510979907E-16)); +#13581 = VECTOR('',#13582,1.); +#13582 = DIRECTION('',(1.,-1.819740506426E-16)); +#13583 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13584 = PCURVE('',#10813,#13585); +#13585 = DEFINITIONAL_REPRESENTATION('',(#13586),#13589); +#13586 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13587,#13588),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,0.194454364826),.PIECEWISE_BEZIER_KNOTS.); +#13587 = CARTESIAN_POINT('',(7.231438502557E-16,1.)); +#13588 = CARTESIAN_POINT('',(0.247487373415,1.)); +#13589 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13590 = ORIENTED_EDGE('',*,*,#13546,.T.); +#13591 = ORIENTED_EDGE('',*,*,#10200,.F.); +#13592 = ORIENTED_EDGE('',*,*,#13593,.F.); +#13593 = EDGE_CURVE('',#13570,#10201,#13594,.T.); +#13594 = SURFACE_CURVE('',#13595,(#13598,#13605),.PCURVE_S1.); +#13595 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13596,#13597),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#13596 = CARTESIAN_POINT('',(-1.7375,-4.275,1.025)); +#13597 = CARTESIAN_POINT('',(-1.680085640382,-4.160171280765,1.75)); +#13598 = PCURVE('',#10216,#13599); +#13599 = DEFINITIONAL_REPRESENTATION('',(#13600),#13604); +#13600 = LINE('',#13601,#13602); +#13601 = CARTESIAN_POINT('',(4.898011958237E-16,2.52510979907E-16)); +#13602 = VECTOR('',#13603,1.); +#13603 = DIRECTION('',(-3.518549751175E-16,1.)); +#13604 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13605 = PCURVE('',#10243,#13606); +#13606 = DEFINITIONAL_REPRESENTATION('',(#13607),#13611); +#13607 = LINE('',#13608,#13609); +#13608 = CARTESIAN_POINT('',(3.475,1.879756940525E-17)); +#13609 = VECTOR('',#13610,1.); +#13610 = DIRECTION('',(0.,1.)); +#13611 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13612 = ADVANCED_FACE('',(#13613),#10243,.F.); +#13613 = FACE_BOUND('',#13614,.F.); +#13614 = EDGE_LOOP('',(#13615,#13635,#13636,#13637)); +#13615 = ORIENTED_EDGE('',*,*,#13616,.T.); +#13616 = EDGE_CURVE('',#10311,#13570,#13617,.T.); +#13617 = SURFACE_CURVE('',#13618,(#13622,#13629),.PCURVE_S1.); +#13618 = LINE('',#13619,#13620); +#13619 = CARTESIAN_POINT('',(1.7375,-4.275,1.025)); +#13620 = VECTOR('',#13621,1.); +#13621 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#13622 = PCURVE('',#10243,#13623); +#13623 = DEFINITIONAL_REPRESENTATION('',(#13624),#13628); +#13624 = LINE('',#13625,#13626); +#13625 = CARTESIAN_POINT('',(1.10407393921E-16,9.850164341594E-17)); +#13626 = VECTOR('',#13627,1.); +#13627 = DIRECTION('',(1.,-2.293642417574E-17)); +#13628 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13629 = PCURVE('',#10762,#13630); +#13630 = DEFINITIONAL_REPRESENTATION('',(#13631),#13634); +#13631 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13632,#13633),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,3.475),.PIECEWISE_BEZIER_KNOTS.); +#13632 = CARTESIAN_POINT('',(-3.280948355558E-16,1.)); +#13633 = CARTESIAN_POINT('',(3.55,1.)); +#13634 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13635 = ORIENTED_EDGE('',*,*,#13593,.T.); +#13636 = ORIENTED_EDGE('',*,*,#10227,.F.); +#13637 = ORIENTED_EDGE('',*,*,#10332,.F.); +#13638 = ADVANCED_FACE('',(#13639),#10295,.F.); +#13639 = FACE_BOUND('',#13640,.F.); +#13640 = EDGE_LOOP('',(#13641,#13670,#13691,#13692)); +#13641 = ORIENTED_EDGE('',*,*,#13642,.T.); +#13642 = EDGE_CURVE('',#13643,#13643,#13645,.T.); +#13643 = VERTEX_POINT('',#13644); +#13644 = CARTESIAN_POINT('',(-1.110171280765,3.210171280765,1.7)); +#13645 = SURFACE_CURVE('',#13646,(#13651,#13658),.PCURVE_S1.); +#13646 = CIRCLE('',#13647,0.3); +#13647 = AXIS2_PLACEMENT_3D('',#13648,#13649,#13650); +#13648 = CARTESIAN_POINT('',(-1.110171280765,3.510171280765,1.7)); +#13649 = DIRECTION('',(-0.,0.,1.)); +#13650 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#13651 = PCURVE('',#10295,#13652); +#13652 = DEFINITIONAL_REPRESENTATION('',(#13653),#13657); +#13653 = LINE('',#13654,#13655); +#13654 = CARTESIAN_POINT('',(6.28318530718,5.E-02)); +#13655 = VECTOR('',#13656,1.); +#13656 = DIRECTION('',(-1.,0.)); +#13657 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13658 = PCURVE('',#13659,#13664); +#13659 = PLANE('',#13660); +#13660 = AXIS2_PLACEMENT_3D('',#13661,#13662,#13663); +#13661 = CARTESIAN_POINT('',(-1.110171280765,3.510171280765,1.7)); +#13662 = DIRECTION('',(0.,0.,1.)); +#13663 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#13664 = DEFINITIONAL_REPRESENTATION('',(#13665),#13669); +#13665 = CIRCLE('',#13666,0.3); +#13666 = AXIS2_PLACEMENT_2D('',#13667,#13668); +#13667 = CARTESIAN_POINT('',(0.,0.)); +#13668 = DIRECTION('',(1.,0.)); +#13669 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13670 = ORIENTED_EDGE('',*,*,#13671,.F.); +#13671 = EDGE_CURVE('',#10279,#13643,#13672,.T.); +#13672 = SEAM_CURVE('',#13673,(#13677,#13684),.PCURVE_S1.); +#13673 = LINE('',#13674,#13675); +#13674 = CARTESIAN_POINT('',(-1.110171280765,3.210171280765,1.75)); +#13675 = VECTOR('',#13676,1.); +#13676 = DIRECTION('',(0.,-0.,-1.)); +#13677 = PCURVE('',#10295,#13678); +#13678 = DEFINITIONAL_REPRESENTATION('',(#13679),#13683); +#13679 = LINE('',#13680,#13681); +#13680 = CARTESIAN_POINT('',(0.,0.)); +#13681 = VECTOR('',#13682,1.); +#13682 = DIRECTION('',(0.,1.)); +#13683 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13684 = PCURVE('',#10295,#13685); +#13685 = DEFINITIONAL_REPRESENTATION('',(#13686),#13690); +#13686 = LINE('',#13687,#13688); +#13687 = CARTESIAN_POINT('',(6.28318530718,0.)); +#13688 = VECTOR('',#13689,1.); +#13689 = DIRECTION('',(0.,1.)); +#13690 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13691 = ORIENTED_EDGE('',*,*,#10278,.F.); +#13692 = ORIENTED_EDGE('',*,*,#13671,.T.); +#13693 = ADVANCED_FACE('',(#13694),#10762,.F.); +#13694 = FACE_BOUND('',#13695,.F.); +#13695 = EDGE_LOOP('',(#13696,#13697,#13717,#13718)); +#13696 = ORIENTED_EDGE('',*,*,#10748,.T.); +#13697 = ORIENTED_EDGE('',*,*,#13698,.T.); +#13698 = EDGE_CURVE('',#10729,#13570,#13699,.T.); +#13699 = SURFACE_CURVE('',#13700,(#13703,#13710),.PCURVE_S1.); +#13700 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13701,#13702),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#13701 = CARTESIAN_POINT('',(-1.775,-4.35,1.025)); +#13702 = CARTESIAN_POINT('',(-1.7375,-4.275,1.025)); +#13703 = PCURVE('',#10762,#13704); +#13704 = DEFINITIONAL_REPRESENTATION('',(#13705),#13709); +#13705 = LINE('',#13706,#13707); +#13706 = CARTESIAN_POINT('',(3.55,1.043148938398E-15)); +#13707 = VECTOR('',#13708,1.); +#13708 = DIRECTION('',(0.,1.)); +#13709 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13710 = PCURVE('',#10813,#13711); +#13711 = DEFINITIONAL_REPRESENTATION('',(#13712),#13716); +#13712 = LINE('',#13713,#13714); +#13713 = CARTESIAN_POINT('',(-1.424868498589E-16,-5.311956991949E-15)); +#13714 = VECTOR('',#13715,1.); +#13715 = DIRECTION('',(3.327508353498E-16,1.)); +#13716 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13717 = ORIENTED_EDGE('',*,*,#13616,.F.); +#13718 = ORIENTED_EDGE('',*,*,#12047,.F.); +#13719 = ADVANCED_FACE('',(#13720),#10813,.F.); +#13720 = FACE_BOUND('',#13721,.F.); +#13721 = EDGE_LOOP('',(#13722,#13723,#13743,#13744)); +#13722 = ORIENTED_EDGE('',*,*,#10799,.T.); +#13723 = ORIENTED_EDGE('',*,*,#13724,.T.); +#13724 = EDGE_CURVE('',#10780,#13173,#13725,.T.); +#13725 = SURFACE_CURVE('',#13726,(#13729,#13736),.PCURVE_S1.); +#13726 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13727,#13728),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#13727 = CARTESIAN_POINT('',(-1.95,-4.175,1.025)); +#13728 = CARTESIAN_POINT('',(-1.875,-4.1375,1.025)); +#13729 = PCURVE('',#10813,#13730); +#13730 = DEFINITIONAL_REPRESENTATION('',(#13731),#13735); +#13731 = LINE('',#13732,#13733); +#13732 = CARTESIAN_POINT('',(0.247487373415,-1.265422341802E-15)); +#13733 = VECTOR('',#13734,1.); +#13734 = DIRECTION('',(1.08246744901E-15,1.)); +#13735 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13736 = PCURVE('',#10873,#13737); +#13737 = DEFINITIONAL_REPRESENTATION('',(#13738),#13742); +#13738 = LINE('',#13739,#13740); +#13739 = CARTESIAN_POINT('',(-3.250147938153E-16,1.933901861802E-15)); +#13740 = VECTOR('',#13741,1.); +#13741 = DIRECTION('',(4.003930637195E-16,1.)); +#13742 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13743 = ORIENTED_EDGE('',*,*,#13569,.F.); +#13744 = ORIENTED_EDGE('',*,*,#13698,.F.); +#13745 = ADVANCED_FACE('',(#13746),#10873,.F.); +#13746 = FACE_BOUND('',#13747,.F.); +#13747 = EDGE_LOOP('',(#13748,#13749,#13750,#13770)); +#13748 = ORIENTED_EDGE('',*,*,#13724,.F.); +#13749 = ORIENTED_EDGE('',*,*,#10859,.T.); +#13750 = ORIENTED_EDGE('',*,*,#13751,.T.); +#13751 = EDGE_CURVE('',#10832,#13175,#13752,.T.); +#13752 = SURFACE_CURVE('',#13753,(#13757,#13763),.PCURVE_S1.); +#13753 = LINE('',#13754,#13755); +#13754 = CARTESIAN_POINT('',(-2.25,-4.015,1.025)); +#13755 = VECTOR('',#13756,1.); +#13756 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#13757 = PCURVE('',#10873,#13758); +#13758 = DEFINITIONAL_REPRESENTATION('',(#13759),#13762); +#13759 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#13760,#13761),.UNSPECIFIED., + .F.,.F.,(2,2),(0.3,0.375),.PIECEWISE_BEZIER_KNOTS.); +#13760 = CARTESIAN_POINT('',(0.16,1.326702326838E-15)); +#13761 = CARTESIAN_POINT('',(0.123610271903,1.)); +#13762 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13763 = PCURVE('',#13212,#13764); +#13764 = DEFINITIONAL_REPRESENTATION('',(#13765),#13769); +#13765 = LINE('',#13766,#13767); +#13766 = CARTESIAN_POINT('',(0.,0.)); +#13767 = VECTOR('',#13768,1.); +#13768 = DIRECTION('',(1.,0.)); +#13769 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13770 = ORIENTED_EDGE('',*,*,#13172,.F.); +#13771 = ADVANCED_FACE('',(#13772),#10847,.F.); +#13772 = FACE_BOUND('',#13773,.F.); +#13773 = EDGE_LOOP('',(#13774,#13775,#13776,#13804,#13832,#13861,#13889, + #13917,#13945,#13978,#14006,#14035)); +#13774 = ORIENTED_EDGE('',*,*,#10831,.F.); +#13775 = ORIENTED_EDGE('',*,*,#10966,.T.); +#13776 = ORIENTED_EDGE('',*,*,#13777,.T.); +#13777 = EDGE_CURVE('',#10967,#13778,#13780,.T.); +#13778 = VERTEX_POINT('',#13779); +#13779 = CARTESIAN_POINT('',(-2.35,-4.015,0.725)); +#13780 = SURFACE_CURVE('',#13781,(#13786,#13797),.PCURVE_S1.); +#13781 = CIRCLE('',#13782,0.1); +#13782 = AXIS2_PLACEMENT_3D('',#13783,#13784,#13785); +#13783 = CARTESIAN_POINT('',(-2.25,-4.015,0.725)); +#13784 = DIRECTION('',(9.95799250103E-17,-1.,0.)); +#13785 = DIRECTION('',(-4.440892098501E-15,-4.422237021476E-31,1.)); +#13786 = PCURVE('',#10847,#13787); +#13787 = DEFINITIONAL_REPRESENTATION('',(#13788),#13796); +#13788 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#13789,#13790,#13791,#13792 + ,#13793,#13794,#13795),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#13789 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#13790 = CARTESIAN_POINT('',(0.292340342435,-7.415408746888E-03)); +#13791 = CARTESIAN_POINT('',(0.142340342435,7.918713163156E-02)); +#13792 = CARTESIAN_POINT('',(-7.659657565E-03,0.16578967201)); +#13793 = CARTESIAN_POINT('',(0.142340342435,0.252392212388)); +#13794 = CARTESIAN_POINT('',(0.292340342435,0.338994752767)); +#13795 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#13796 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13797 = PCURVE('',#11032,#13798); +#13798 = DEFINITIONAL_REPRESENTATION('',(#13799),#13803); +#13799 = LINE('',#13800,#13801); +#13800 = CARTESIAN_POINT('',(0.,0.)); +#13801 = VECTOR('',#13802,1.); +#13802 = DIRECTION('',(1.,0.)); +#13803 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13804 = ORIENTED_EDGE('',*,*,#13805,.T.); +#13805 = EDGE_CURVE('',#13778,#13806,#13808,.T.); +#13806 = VERTEX_POINT('',#13807); +#13807 = CARTESIAN_POINT('',(-2.35,-4.015,0.3)); +#13808 = SURFACE_CURVE('',#13809,(#13813,#13820),.PCURVE_S1.); +#13809 = LINE('',#13810,#13811); +#13810 = CARTESIAN_POINT('',(-2.35,-4.015,0.725)); +#13811 = VECTOR('',#13812,1.); +#13812 = DIRECTION('',(-1.044915787883E-15,-1.040526357994E-31,-1.)); +#13813 = PCURVE('',#10847,#13814); +#13814 = DEFINITIONAL_REPRESENTATION('',(#13815),#13819); +#13815 = LINE('',#13816,#13817); +#13816 = CARTESIAN_POINT('',(0.192340342435,6.578967201E-02)); +#13817 = VECTOR('',#13818,1.); +#13818 = DIRECTION('',(-1.,-1.044915787883E-15)); +#13819 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13820 = PCURVE('',#13821,#13826); +#13821 = PLANE('',#13822); +#13822 = AXIS2_PLACEMENT_3D('',#13823,#13824,#13825); +#13823 = CARTESIAN_POINT('',(-2.35,-4.015,0.725)); +#13824 = DIRECTION('',(-1.,-9.95799250103E-17,1.044915787883E-15)); +#13825 = DIRECTION('',(-1.044915787883E-15,-1.040526357994E-31,-1.)); +#13826 = DEFINITIONAL_REPRESENTATION('',(#13827),#13831); +#13827 = LINE('',#13828,#13829); +#13828 = CARTESIAN_POINT('',(-0.,0.)); +#13829 = VECTOR('',#13830,1.); +#13830 = DIRECTION('',(1.,0.)); +#13831 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13832 = ORIENTED_EDGE('',*,*,#13833,.T.); +#13833 = EDGE_CURVE('',#13806,#13834,#13836,.T.); +#13834 = VERTEX_POINT('',#13835); +#13835 = CARTESIAN_POINT('',(-2.65,-4.015,5.551115123126E-17)); +#13836 = SURFACE_CURVE('',#13837,(#13842,#13849),.PCURVE_S1.); +#13837 = CIRCLE('',#13838,0.3); +#13838 = AXIS2_PLACEMENT_3D('',#13839,#13840,#13841); +#13839 = CARTESIAN_POINT('',(-2.65,-4.015,0.3)); +#13840 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#13841 = DIRECTION('',(1.,9.95799250103E-17,3.515706244646E-15)); +#13842 = PCURVE('',#10847,#13843); +#13843 = DEFINITIONAL_REPRESENTATION('',(#13844),#13848); +#13844 = CIRCLE('',#13845,0.3); +#13845 = AXIS2_PLACEMENT_2D('',#13846,#13847); +#13846 = CARTESIAN_POINT('',(-0.232659657565,-0.23421032799)); +#13847 = DIRECTION('',(3.515706244646E-15,1.)); +#13848 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13849 = PCURVE('',#13850,#13855); +#13850 = CYLINDRICAL_SURFACE('',#13851,0.3); +#13851 = AXIS2_PLACEMENT_3D('',#13852,#13853,#13854); +#13852 = CARTESIAN_POINT('',(-2.65,-4.015,0.3)); +#13853 = DIRECTION('',(9.95799250103E-17,-1.,-0.)); +#13854 = DIRECTION('',(1.,9.95799250103E-17,3.515706244646E-15)); +#13855 = DEFINITIONAL_REPRESENTATION('',(#13856),#13860); +#13856 = LINE('',#13857,#13858); +#13857 = CARTESIAN_POINT('',(6.28318530718,0.)); +#13858 = VECTOR('',#13859,1.); +#13859 = DIRECTION('',(-1.,0.)); +#13860 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13861 = ORIENTED_EDGE('',*,*,#13862,.T.); +#13862 = EDGE_CURVE('',#13834,#13863,#13865,.T.); +#13863 = VERTEX_POINT('',#13864); +#13864 = CARTESIAN_POINT('',(-3.,-4.015,5.551115123126E-17)); +#13865 = SURFACE_CURVE('',#13866,(#13870,#13877),.PCURVE_S1.); +#13866 = LINE('',#13867,#13868); +#13867 = CARTESIAN_POINT('',(-2.65,-4.015,5.551115123126E-17)); +#13868 = VECTOR('',#13869,1.); +#13869 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#13870 = PCURVE('',#10847,#13871); +#13871 = DEFINITIONAL_REPRESENTATION('',(#13872),#13876); +#13872 = LINE('',#13873,#13874); +#13873 = CARTESIAN_POINT('',(-0.532659657565,-0.23421032799)); +#13874 = VECTOR('',#13875,1.); +#13875 = DIRECTION('',(0.,-1.)); +#13876 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13877 = PCURVE('',#13878,#13883); +#13878 = PLANE('',#13879); +#13879 = AXIS2_PLACEMENT_3D('',#13880,#13881,#13882); +#13880 = CARTESIAN_POINT('',(-2.65,-4.015,5.551115123126E-17)); +#13881 = DIRECTION('',(0.,0.,1.)); +#13882 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#13883 = DEFINITIONAL_REPRESENTATION('',(#13884),#13888); +#13884 = LINE('',#13885,#13886); +#13885 = CARTESIAN_POINT('',(0.,0.)); +#13886 = VECTOR('',#13887,1.); +#13887 = DIRECTION('',(1.,0.)); +#13888 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13889 = ORIENTED_EDGE('',*,*,#13890,.T.); +#13890 = EDGE_CURVE('',#13863,#13891,#13893,.T.); +#13891 = VERTEX_POINT('',#13892); +#13892 = CARTESIAN_POINT('',(-3.,-4.015,0.2)); +#13893 = SURFACE_CURVE('',#13894,(#13898,#13905),.PCURVE_S1.); +#13894 = LINE('',#13895,#13896); +#13895 = CARTESIAN_POINT('',(-3.,-4.015,5.551115123126E-17)); +#13896 = VECTOR('',#13897,1.); +#13897 = DIRECTION('',(0.,0.,1.)); +#13898 = PCURVE('',#10847,#13899); +#13899 = DEFINITIONAL_REPRESENTATION('',(#13900),#13904); +#13900 = LINE('',#13901,#13902); +#13901 = CARTESIAN_POINT('',(-0.532659657565,-0.58421032799)); +#13902 = VECTOR('',#13903,1.); +#13903 = DIRECTION('',(1.,0.)); +#13904 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13905 = PCURVE('',#13906,#13911); +#13906 = PLANE('',#13907); +#13907 = AXIS2_PLACEMENT_3D('',#13908,#13909,#13910); +#13908 = CARTESIAN_POINT('',(-3.,-4.015,5.551115123126E-17)); +#13909 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#13910 = DIRECTION('',(0.,-0.,1.)); +#13911 = DEFINITIONAL_REPRESENTATION('',(#13912),#13916); +#13912 = LINE('',#13913,#13914); +#13913 = CARTESIAN_POINT('',(0.,0.)); +#13914 = VECTOR('',#13915,1.); +#13915 = DIRECTION('',(1.,0.)); +#13916 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13917 = ORIENTED_EDGE('',*,*,#13918,.T.); +#13918 = EDGE_CURVE('',#13891,#13919,#13921,.T.); +#13919 = VERTEX_POINT('',#13920); +#13920 = CARTESIAN_POINT('',(-2.65,-4.015,0.2)); +#13921 = SURFACE_CURVE('',#13922,(#13926,#13933),.PCURVE_S1.); +#13922 = LINE('',#13923,#13924); +#13923 = CARTESIAN_POINT('',(-3.,-4.015,0.2)); +#13924 = VECTOR('',#13925,1.); +#13925 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#13926 = PCURVE('',#10847,#13927); +#13927 = DEFINITIONAL_REPRESENTATION('',(#13928),#13932); +#13928 = LINE('',#13929,#13930); +#13929 = CARTESIAN_POINT('',(-0.332659657565,-0.58421032799)); +#13930 = VECTOR('',#13931,1.); +#13931 = DIRECTION('',(0.,1.)); +#13932 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13933 = PCURVE('',#13934,#13939); +#13934 = PLANE('',#13935); +#13935 = AXIS2_PLACEMENT_3D('',#13936,#13937,#13938); +#13936 = CARTESIAN_POINT('',(-3.,-4.015,0.2)); +#13937 = DIRECTION('',(-0.,0.,-1.)); +#13938 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#13939 = DEFINITIONAL_REPRESENTATION('',(#13940),#13944); +#13940 = LINE('',#13941,#13942); +#13941 = CARTESIAN_POINT('',(0.,0.)); +#13942 = VECTOR('',#13943,1.); +#13943 = DIRECTION('',(1.,0.)); +#13944 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13945 = ORIENTED_EDGE('',*,*,#13946,.T.); +#13946 = EDGE_CURVE('',#13919,#13947,#13949,.T.); +#13947 = VERTEX_POINT('',#13948); +#13948 = CARTESIAN_POINT('',(-2.55,-4.015,0.3)); +#13949 = SURFACE_CURVE('',#13950,(#13955,#13966),.PCURVE_S1.); +#13950 = CIRCLE('',#13951,0.1); +#13951 = AXIS2_PLACEMENT_3D('',#13952,#13953,#13954); +#13952 = CARTESIAN_POINT('',(-2.65,-4.015,0.3)); +#13953 = DIRECTION('',(9.95799250103E-17,-1.,-0.)); +#13954 = DIRECTION('',(-0.,0.,-1.)); +#13955 = PCURVE('',#10847,#13956); +#13956 = DEFINITIONAL_REPRESENTATION('',(#13957),#13965); +#13957 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#13958,#13959,#13960,#13961 + ,#13962,#13963,#13964),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#13958 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#13959 = CARTESIAN_POINT('',(-0.332659657565,-6.100524723311E-02)); +#13960 = CARTESIAN_POINT('',(-0.182659657565,-0.147607787612)); +#13961 = CARTESIAN_POINT('',(-3.2659657565E-02,-0.23421032799)); +#13962 = CARTESIAN_POINT('',(-0.182659657565,-0.320812868368)); +#13963 = CARTESIAN_POINT('',(-0.332659657565,-0.407415408747)); +#13964 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#13965 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13966 = PCURVE('',#13967,#13972); +#13967 = CYLINDRICAL_SURFACE('',#13968,0.1); +#13968 = AXIS2_PLACEMENT_3D('',#13969,#13970,#13971); +#13969 = CARTESIAN_POINT('',(-2.65,-4.015,0.3)); +#13970 = DIRECTION('',(9.95799250103E-17,-1.,0.)); +#13971 = DIRECTION('',(0.,-0.,-1.)); +#13972 = DEFINITIONAL_REPRESENTATION('',(#13973),#13977); +#13973 = LINE('',#13974,#13975); +#13974 = CARTESIAN_POINT('',(0.,0.)); +#13975 = VECTOR('',#13976,1.); +#13976 = DIRECTION('',(1.,0.)); +#13977 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13978 = ORIENTED_EDGE('',*,*,#13979,.T.); +#13979 = EDGE_CURVE('',#13947,#13980,#13982,.T.); +#13980 = VERTEX_POINT('',#13981); +#13981 = CARTESIAN_POINT('',(-2.55,-4.015,0.725)); +#13982 = SURFACE_CURVE('',#13983,(#13987,#13994),.PCURVE_S1.); +#13983 = LINE('',#13984,#13985); +#13984 = CARTESIAN_POINT('',(-2.55,-4.015,0.3)); +#13985 = VECTOR('',#13986,1.); +#13986 = DIRECTION('',(0.,0.,1.)); +#13987 = PCURVE('',#10847,#13988); +#13988 = DEFINITIONAL_REPRESENTATION('',(#13989),#13993); +#13989 = LINE('',#13990,#13991); +#13990 = CARTESIAN_POINT('',(-0.232659657565,-0.13421032799)); +#13991 = VECTOR('',#13992,1.); +#13992 = DIRECTION('',(1.,0.)); +#13993 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#13994 = PCURVE('',#13995,#14000); +#13995 = PLANE('',#13996); +#13996 = AXIS2_PLACEMENT_3D('',#13997,#13998,#13999); +#13997 = CARTESIAN_POINT('',(-2.55,-4.015,0.3)); +#13998 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#13999 = DIRECTION('',(0.,-0.,1.)); +#14000 = DEFINITIONAL_REPRESENTATION('',(#14001),#14005); +#14001 = LINE('',#14002,#14003); +#14002 = CARTESIAN_POINT('',(0.,0.)); +#14003 = VECTOR('',#14004,1.); +#14004 = DIRECTION('',(1.,0.)); +#14005 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14006 = ORIENTED_EDGE('',*,*,#14007,.T.); +#14007 = EDGE_CURVE('',#13980,#14008,#14010,.T.); +#14008 = VERTEX_POINT('',#14009); +#14009 = CARTESIAN_POINT('',(-2.25,-4.015,1.025)); +#14010 = SURFACE_CURVE('',#14011,(#14016,#14023),.PCURVE_S1.); +#14011 = CIRCLE('',#14012,0.3); +#14012 = AXIS2_PLACEMENT_3D('',#14013,#14014,#14015); +#14013 = CARTESIAN_POINT('',(-2.25,-4.015,0.725)); +#14014 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#14015 = DIRECTION('',(-1.,-9.95799250103E-17,3.700743415417E-16)); +#14016 = PCURVE('',#10847,#14017); +#14017 = DEFINITIONAL_REPRESENTATION('',(#14018),#14022); +#14018 = CIRCLE('',#14019,0.3); +#14019 = AXIS2_PLACEMENT_2D('',#14020,#14021); +#14020 = CARTESIAN_POINT('',(0.192340342435,0.16578967201)); +#14021 = DIRECTION('',(3.700743415417E-16,-1.)); +#14022 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14023 = PCURVE('',#14024,#14029); +#14024 = CYLINDRICAL_SURFACE('',#14025,0.3); +#14025 = AXIS2_PLACEMENT_3D('',#14026,#14027,#14028); +#14026 = CARTESIAN_POINT('',(-2.25,-4.015,0.725)); +#14027 = DIRECTION('',(9.95799250103E-17,-1.,-0.)); +#14028 = DIRECTION('',(-1.,-9.95799250103E-17,3.700743415417E-16)); +#14029 = DEFINITIONAL_REPRESENTATION('',(#14030),#14034); +#14030 = LINE('',#14031,#14032); +#14031 = CARTESIAN_POINT('',(6.28318530718,0.)); +#14032 = VECTOR('',#14033,1.); +#14033 = DIRECTION('',(-1.,0.)); +#14034 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14035 = ORIENTED_EDGE('',*,*,#14036,.T.); +#14036 = EDGE_CURVE('',#14008,#10832,#14037,.T.); +#14037 = SURFACE_CURVE('',#14038,(#14042,#14049),.PCURVE_S1.); +#14038 = LINE('',#14039,#14040); +#14039 = CARTESIAN_POINT('',(-2.25,-4.015,1.025)); +#14040 = VECTOR('',#14041,1.); +#14041 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#14042 = PCURVE('',#10847,#14043); +#14043 = DEFINITIONAL_REPRESENTATION('',(#14044),#14048); +#14044 = LINE('',#14045,#14046); +#14045 = CARTESIAN_POINT('',(0.492340342435,0.16578967201)); +#14046 = VECTOR('',#14047,1.); +#14047 = DIRECTION('',(0.,1.)); +#14048 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14049 = PCURVE('',#13212,#14050); +#14050 = DEFINITIONAL_REPRESENTATION('',(#14051),#14055); +#14051 = LINE('',#14052,#14053); +#14052 = CARTESIAN_POINT('',(0.,0.)); +#14053 = VECTOR('',#14054,1.); +#14054 = DIRECTION('',(1.,0.)); +#14055 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14056 = ADVANCED_FACE('',(#14057),#10904,.T.); +#14057 = FACE_BOUND('',#14058,.T.); +#14058 = EDGE_LOOP('',(#14059,#14060,#14061,#14089,#14117,#14146,#14174, + #14202,#14230,#14263,#14291,#14320)); +#14059 = ORIENTED_EDGE('',*,*,#10888,.F.); +#14060 = ORIENTED_EDGE('',*,*,#11076,.T.); +#14061 = ORIENTED_EDGE('',*,*,#14062,.T.); +#14062 = EDGE_CURVE('',#11077,#14063,#14065,.T.); +#14063 = VERTEX_POINT('',#14064); +#14064 = CARTESIAN_POINT('',(-2.35,4.015,0.725)); +#14065 = SURFACE_CURVE('',#14066,(#14071,#14082),.PCURVE_S1.); +#14066 = CIRCLE('',#14067,0.1); +#14067 = AXIS2_PLACEMENT_3D('',#14068,#14069,#14070); +#14068 = CARTESIAN_POINT('',(-2.25,4.015,0.725)); +#14069 = DIRECTION('',(9.95799250103E-17,-1.,0.)); +#14070 = DIRECTION('',(-4.440892098501E-15,-4.422237021476E-31,1.)); +#14071 = PCURVE('',#10904,#14072); +#14072 = DEFINITIONAL_REPRESENTATION('',(#14073),#14081); +#14073 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#14074,#14075,#14076,#14077 + ,#14078,#14079,#14080),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#14074 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#14075 = CARTESIAN_POINT('',(0.292340342435,-7.415408746888E-03)); +#14076 = CARTESIAN_POINT('',(0.142340342435,7.918713163156E-02)); +#14077 = CARTESIAN_POINT('',(-7.659657565E-03,0.16578967201)); +#14078 = CARTESIAN_POINT('',(0.142340342435,0.252392212388)); +#14079 = CARTESIAN_POINT('',(0.292340342435,0.338994752767)); +#14080 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#14081 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14082 = PCURVE('',#11113,#14083); +#14083 = DEFINITIONAL_REPRESENTATION('',(#14084),#14088); +#14084 = LINE('',#14085,#14086); +#14085 = CARTESIAN_POINT('',(0.,-0.41)); +#14086 = VECTOR('',#14087,1.); +#14087 = DIRECTION('',(1.,0.)); +#14088 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14089 = ORIENTED_EDGE('',*,*,#14090,.T.); +#14090 = EDGE_CURVE('',#14063,#14091,#14093,.T.); +#14091 = VERTEX_POINT('',#14092); +#14092 = CARTESIAN_POINT('',(-2.35,4.015,0.3)); +#14093 = SURFACE_CURVE('',#14094,(#14098,#14105),.PCURVE_S1.); +#14094 = LINE('',#14095,#14096); +#14095 = CARTESIAN_POINT('',(-2.35,4.015,0.725)); +#14096 = VECTOR('',#14097,1.); +#14097 = DIRECTION('',(-1.044915787883E-15,-1.040526357994E-31,-1.)); +#14098 = PCURVE('',#10904,#14099); +#14099 = DEFINITIONAL_REPRESENTATION('',(#14100),#14104); +#14100 = LINE('',#14101,#14102); +#14101 = CARTESIAN_POINT('',(0.192340342435,6.578967201E-02)); +#14102 = VECTOR('',#14103,1.); +#14103 = DIRECTION('',(-1.,-1.044915787883E-15)); +#14104 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14105 = PCURVE('',#14106,#14111); +#14106 = PLANE('',#14107); +#14107 = AXIS2_PLACEMENT_3D('',#14108,#14109,#14110); +#14108 = CARTESIAN_POINT('',(-2.35,3.605,0.725)); +#14109 = DIRECTION('',(-1.,-9.95799250103E-17,1.044915787883E-15)); +#14110 = DIRECTION('',(-1.044915787883E-15,-1.040526357994E-31,-1.)); +#14111 = DEFINITIONAL_REPRESENTATION('',(#14112),#14116); +#14112 = LINE('',#14113,#14114); +#14113 = CARTESIAN_POINT('',(-4.266158067775E-32,-0.41)); +#14114 = VECTOR('',#14115,1.); +#14115 = DIRECTION('',(1.,0.)); +#14116 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14117 = ORIENTED_EDGE('',*,*,#14118,.T.); +#14118 = EDGE_CURVE('',#14091,#14119,#14121,.T.); +#14119 = VERTEX_POINT('',#14120); +#14120 = CARTESIAN_POINT('',(-2.65,4.015,5.551115123126E-17)); +#14121 = SURFACE_CURVE('',#14122,(#14127,#14134),.PCURVE_S1.); +#14122 = CIRCLE('',#14123,0.3); +#14123 = AXIS2_PLACEMENT_3D('',#14124,#14125,#14126); +#14124 = CARTESIAN_POINT('',(-2.65,4.015,0.3)); +#14125 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#14126 = DIRECTION('',(1.,9.95799250103E-17,3.515706244646E-15)); +#14127 = PCURVE('',#10904,#14128); +#14128 = DEFINITIONAL_REPRESENTATION('',(#14129),#14133); +#14129 = CIRCLE('',#14130,0.3); +#14130 = AXIS2_PLACEMENT_2D('',#14131,#14132); +#14131 = CARTESIAN_POINT('',(-0.232659657565,-0.23421032799)); +#14132 = DIRECTION('',(3.515706244646E-15,1.)); +#14133 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14134 = PCURVE('',#14135,#14140); +#14135 = CYLINDRICAL_SURFACE('',#14136,0.3); +#14136 = AXIS2_PLACEMENT_3D('',#14137,#14138,#14139); +#14137 = CARTESIAN_POINT('',(-2.65,3.605,0.3)); +#14138 = DIRECTION('',(9.95799250103E-17,-1.,-0.)); +#14139 = DIRECTION('',(1.,9.95799250103E-17,3.515706244646E-15)); +#14140 = DEFINITIONAL_REPRESENTATION('',(#14141),#14145); +#14141 = LINE('',#14142,#14143); +#14142 = CARTESIAN_POINT('',(6.28318530718,-0.41)); +#14143 = VECTOR('',#14144,1.); +#14144 = DIRECTION('',(-1.,0.)); +#14145 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14146 = ORIENTED_EDGE('',*,*,#14147,.T.); +#14147 = EDGE_CURVE('',#14119,#14148,#14150,.T.); +#14148 = VERTEX_POINT('',#14149); +#14149 = CARTESIAN_POINT('',(-3.,4.015,5.551115123126E-17)); +#14150 = SURFACE_CURVE('',#14151,(#14155,#14162),.PCURVE_S1.); +#14151 = LINE('',#14152,#14153); +#14152 = CARTESIAN_POINT('',(-2.65,4.015,5.551115123126E-17)); +#14153 = VECTOR('',#14154,1.); +#14154 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#14155 = PCURVE('',#10904,#14156); +#14156 = DEFINITIONAL_REPRESENTATION('',(#14157),#14161); +#14157 = LINE('',#14158,#14159); +#14158 = CARTESIAN_POINT('',(-0.532659657565,-0.23421032799)); +#14159 = VECTOR('',#14160,1.); +#14160 = DIRECTION('',(0.,-1.)); +#14161 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14162 = PCURVE('',#14163,#14168); +#14163 = PLANE('',#14164); +#14164 = AXIS2_PLACEMENT_3D('',#14165,#14166,#14167); +#14165 = CARTESIAN_POINT('',(-2.65,3.605,5.551115123126E-17)); +#14166 = DIRECTION('',(0.,0.,1.)); +#14167 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#14168 = DEFINITIONAL_REPRESENTATION('',(#14169),#14173); +#14169 = LINE('',#14170,#14171); +#14170 = CARTESIAN_POINT('',(-4.082776925422E-17,-0.41)); +#14171 = VECTOR('',#14172,1.); +#14172 = DIRECTION('',(1.,0.)); +#14173 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14174 = ORIENTED_EDGE('',*,*,#14175,.T.); +#14175 = EDGE_CURVE('',#14148,#14176,#14178,.T.); +#14176 = VERTEX_POINT('',#14177); +#14177 = CARTESIAN_POINT('',(-3.,4.015,0.2)); +#14178 = SURFACE_CURVE('',#14179,(#14183,#14190),.PCURVE_S1.); +#14179 = LINE('',#14180,#14181); +#14180 = CARTESIAN_POINT('',(-3.,4.015,5.551115123126E-17)); +#14181 = VECTOR('',#14182,1.); +#14182 = DIRECTION('',(0.,0.,1.)); +#14183 = PCURVE('',#10904,#14184); +#14184 = DEFINITIONAL_REPRESENTATION('',(#14185),#14189); +#14185 = LINE('',#14186,#14187); +#14186 = CARTESIAN_POINT('',(-0.532659657565,-0.58421032799)); +#14187 = VECTOR('',#14188,1.); +#14188 = DIRECTION('',(1.,0.)); +#14189 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14190 = PCURVE('',#14191,#14196); +#14191 = PLANE('',#14192); +#14192 = AXIS2_PLACEMENT_3D('',#14193,#14194,#14195); +#14193 = CARTESIAN_POINT('',(-3.,3.605,5.551115123126E-17)); +#14194 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#14195 = DIRECTION('',(0.,-0.,1.)); +#14196 = DEFINITIONAL_REPRESENTATION('',(#14197),#14201); +#14197 = LINE('',#14198,#14199); +#14198 = CARTESIAN_POINT('',(0.,-0.41)); +#14199 = VECTOR('',#14200,1.); +#14200 = DIRECTION('',(1.,0.)); +#14201 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14202 = ORIENTED_EDGE('',*,*,#14203,.T.); +#14203 = EDGE_CURVE('',#14176,#14204,#14206,.T.); +#14204 = VERTEX_POINT('',#14205); +#14205 = CARTESIAN_POINT('',(-2.65,4.015,0.2)); +#14206 = SURFACE_CURVE('',#14207,(#14211,#14218),.PCURVE_S1.); +#14207 = LINE('',#14208,#14209); +#14208 = CARTESIAN_POINT('',(-3.,4.015,0.2)); +#14209 = VECTOR('',#14210,1.); +#14210 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#14211 = PCURVE('',#10904,#14212); +#14212 = DEFINITIONAL_REPRESENTATION('',(#14213),#14217); +#14213 = LINE('',#14214,#14215); +#14214 = CARTESIAN_POINT('',(-0.332659657565,-0.58421032799)); +#14215 = VECTOR('',#14216,1.); +#14216 = DIRECTION('',(0.,1.)); +#14217 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14218 = PCURVE('',#14219,#14224); +#14219 = PLANE('',#14220); +#14220 = AXIS2_PLACEMENT_3D('',#14221,#14222,#14223); +#14221 = CARTESIAN_POINT('',(-3.,3.605,0.2)); +#14222 = DIRECTION('',(-0.,0.,-1.)); +#14223 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#14224 = DEFINITIONAL_REPRESENTATION('',(#14225),#14229); +#14225 = LINE('',#14226,#14227); +#14226 = CARTESIAN_POINT('',(4.082776925422E-17,-0.41)); +#14227 = VECTOR('',#14228,1.); +#14228 = DIRECTION('',(1.,0.)); +#14229 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14230 = ORIENTED_EDGE('',*,*,#14231,.T.); +#14231 = EDGE_CURVE('',#14204,#14232,#14234,.T.); +#14232 = VERTEX_POINT('',#14233); +#14233 = CARTESIAN_POINT('',(-2.55,4.015,0.3)); +#14234 = SURFACE_CURVE('',#14235,(#14240,#14251),.PCURVE_S1.); +#14235 = CIRCLE('',#14236,0.1); +#14236 = AXIS2_PLACEMENT_3D('',#14237,#14238,#14239); +#14237 = CARTESIAN_POINT('',(-2.65,4.015,0.3)); +#14238 = DIRECTION('',(9.95799250103E-17,-1.,-0.)); +#14239 = DIRECTION('',(-0.,0.,-1.)); +#14240 = PCURVE('',#10904,#14241); +#14241 = DEFINITIONAL_REPRESENTATION('',(#14242),#14250); +#14242 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#14243,#14244,#14245,#14246 + ,#14247,#14248,#14249),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#14243 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#14244 = CARTESIAN_POINT('',(-0.332659657565,-6.100524723311E-02)); +#14245 = CARTESIAN_POINT('',(-0.182659657565,-0.147607787612)); +#14246 = CARTESIAN_POINT('',(-3.2659657565E-02,-0.23421032799)); +#14247 = CARTESIAN_POINT('',(-0.182659657565,-0.320812868368)); +#14248 = CARTESIAN_POINT('',(-0.332659657565,-0.407415408747)); +#14249 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#14250 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14251 = PCURVE('',#14252,#14257); +#14252 = CYLINDRICAL_SURFACE('',#14253,0.1); +#14253 = AXIS2_PLACEMENT_3D('',#14254,#14255,#14256); +#14254 = CARTESIAN_POINT('',(-2.65,3.605,0.3)); +#14255 = DIRECTION('',(9.95799250103E-17,-1.,0.)); +#14256 = DIRECTION('',(0.,-0.,-1.)); +#14257 = DEFINITIONAL_REPRESENTATION('',(#14258),#14262); +#14258 = LINE('',#14259,#14260); +#14259 = CARTESIAN_POINT('',(0.,-0.41)); +#14260 = VECTOR('',#14261,1.); +#14261 = DIRECTION('',(1.,0.)); +#14262 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14263 = ORIENTED_EDGE('',*,*,#14264,.T.); +#14264 = EDGE_CURVE('',#14232,#14265,#14267,.T.); +#14265 = VERTEX_POINT('',#14266); +#14266 = CARTESIAN_POINT('',(-2.55,4.015,0.725)); +#14267 = SURFACE_CURVE('',#14268,(#14272,#14279),.PCURVE_S1.); +#14268 = LINE('',#14269,#14270); +#14269 = CARTESIAN_POINT('',(-2.55,4.015,0.3)); +#14270 = VECTOR('',#14271,1.); +#14271 = DIRECTION('',(0.,0.,1.)); +#14272 = PCURVE('',#10904,#14273); +#14273 = DEFINITIONAL_REPRESENTATION('',(#14274),#14278); +#14274 = LINE('',#14275,#14276); +#14275 = CARTESIAN_POINT('',(-0.232659657565,-0.13421032799)); +#14276 = VECTOR('',#14277,1.); +#14277 = DIRECTION('',(1.,0.)); +#14278 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14279 = PCURVE('',#14280,#14285); +#14280 = PLANE('',#14281); +#14281 = AXIS2_PLACEMENT_3D('',#14282,#14283,#14284); +#14282 = CARTESIAN_POINT('',(-2.55,3.605,0.3)); +#14283 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#14284 = DIRECTION('',(0.,-0.,1.)); +#14285 = DEFINITIONAL_REPRESENTATION('',(#14286),#14290); +#14286 = LINE('',#14287,#14288); +#14287 = CARTESIAN_POINT('',(0.,-0.41)); +#14288 = VECTOR('',#14289,1.); +#14289 = DIRECTION('',(1.,0.)); +#14290 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14291 = ORIENTED_EDGE('',*,*,#14292,.T.); +#14292 = EDGE_CURVE('',#14265,#14293,#14295,.T.); +#14293 = VERTEX_POINT('',#14294); +#14294 = CARTESIAN_POINT('',(-2.25,4.015,1.025)); +#14295 = SURFACE_CURVE('',#14296,(#14301,#14308),.PCURVE_S1.); +#14296 = CIRCLE('',#14297,0.3); +#14297 = AXIS2_PLACEMENT_3D('',#14298,#14299,#14300); +#14298 = CARTESIAN_POINT('',(-2.25,4.015,0.725)); +#14299 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#14300 = DIRECTION('',(-1.,-9.95799250103E-17,3.700743415417E-16)); +#14301 = PCURVE('',#10904,#14302); +#14302 = DEFINITIONAL_REPRESENTATION('',(#14303),#14307); +#14303 = CIRCLE('',#14304,0.3); +#14304 = AXIS2_PLACEMENT_2D('',#14305,#14306); +#14305 = CARTESIAN_POINT('',(0.192340342435,0.16578967201)); +#14306 = DIRECTION('',(3.700743415417E-16,-1.)); +#14307 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14308 = PCURVE('',#14309,#14314); +#14309 = CYLINDRICAL_SURFACE('',#14310,0.3); +#14310 = AXIS2_PLACEMENT_3D('',#14311,#14312,#14313); +#14311 = CARTESIAN_POINT('',(-2.25,3.605,0.725)); +#14312 = DIRECTION('',(9.95799250103E-17,-1.,-0.)); +#14313 = DIRECTION('',(-1.,-9.95799250103E-17,3.700743415417E-16)); +#14314 = DEFINITIONAL_REPRESENTATION('',(#14315),#14319); +#14315 = LINE('',#14316,#14317); +#14316 = CARTESIAN_POINT('',(6.28318530718,-0.41)); +#14317 = VECTOR('',#14318,1.); +#14318 = DIRECTION('',(-1.,0.)); +#14319 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14320 = ORIENTED_EDGE('',*,*,#14321,.T.); +#14321 = EDGE_CURVE('',#14293,#10889,#14322,.T.); +#14322 = SURFACE_CURVE('',#14323,(#14327,#14334),.PCURVE_S1.); +#14323 = LINE('',#14324,#14325); +#14324 = CARTESIAN_POINT('',(-2.25,4.015,1.025)); +#14325 = VECTOR('',#14326,1.); +#14326 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#14327 = PCURVE('',#10904,#14328); +#14328 = DEFINITIONAL_REPRESENTATION('',(#14329),#14333); +#14329 = LINE('',#14330,#14331); +#14330 = CARTESIAN_POINT('',(0.492340342435,0.16578967201)); +#14331 = VECTOR('',#14332,1.); +#14332 = DIRECTION('',(0.,1.)); +#14333 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14334 = PCURVE('',#13512,#14335); +#14335 = DEFINITIONAL_REPRESENTATION('',(#14336),#14340); +#14336 = LINE('',#14337,#14338); +#14337 = CARTESIAN_POINT('',(4.082776925422E-17,-0.41)); +#14338 = VECTOR('',#14339,1.); +#14339 = DIRECTION('',(1.,0.)); +#14340 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14341 = ADVANCED_FACE('',(#14342),#10951,.F.); +#14342 = FACE_BOUND('',#14343,.F.); +#14343 = EDGE_LOOP('',(#14344,#14364,#14365,#14385)); +#14344 = ORIENTED_EDGE('',*,*,#14345,.F.); +#14345 = EDGE_CURVE('',#10889,#13497,#14346,.T.); +#14346 = SURFACE_CURVE('',#14347,(#14351,#14357),.PCURVE_S1.); +#14347 = LINE('',#14348,#14349); +#14348 = CARTESIAN_POINT('',(-2.25,4.015,1.025)); +#14349 = VECTOR('',#14350,1.); +#14350 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#14351 = PCURVE('',#10951,#14352); +#14352 = DEFINITIONAL_REPRESENTATION('',(#14353),#14356); +#14353 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#14354,#14355),.UNSPECIFIED., + .F.,.F.,(2,2),(0.3,0.375),.PIECEWISE_BEZIER_KNOTS.); +#14354 = CARTESIAN_POINT('',(8.19,-1.633892320613E-15)); +#14355 = CARTESIAN_POINT('',(8.226389728097,1.)); +#14356 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14357 = PCURVE('',#13512,#14358); +#14358 = DEFINITIONAL_REPRESENTATION('',(#14359),#14363); +#14359 = LINE('',#14360,#14361); +#14360 = CARTESIAN_POINT('',(4.082776925422E-17,-0.41)); +#14361 = VECTOR('',#14362,1.); +#14362 = DIRECTION('',(1.,0.)); +#14363 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14364 = ORIENTED_EDGE('',*,*,#10937,.T.); +#14365 = ORIENTED_EDGE('',*,*,#14366,.T.); +#14366 = EDGE_CURVE('',#10918,#13126,#14367,.T.); +#14367 = SURFACE_CURVE('',#14368,(#14371,#14378),.PCURVE_S1.); +#14368 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#14369,#14370),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#14369 = CARTESIAN_POINT('',(-1.95,4.175,1.025)); +#14370 = CARTESIAN_POINT('',(-1.875,4.1375,1.025)); +#14371 = PCURVE('',#10951,#14372); +#14372 = DEFINITIONAL_REPRESENTATION('',(#14373),#14377); +#14373 = LINE('',#14374,#14375); +#14374 = CARTESIAN_POINT('',(8.35,1.922661875764E-15)); +#14375 = VECTOR('',#14376,1.); +#14376 = DIRECTION('',(0.,1.)); +#14377 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14378 = PCURVE('',#12030,#14379); +#14379 = DEFINITIONAL_REPRESENTATION('',(#14380),#14384); +#14380 = LINE('',#14381,#14382); +#14381 = CARTESIAN_POINT('',(8.24192440478E-16,-9.160293478888E-15)); +#14382 = VECTOR('',#14383,1.); +#14383 = DIRECTION('',(-1.789977232675E-15,1.)); +#14384 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14385 = ORIENTED_EDGE('',*,*,#13524,.F.); +#14386 = ADVANCED_FACE('',(#14387),#11032,.F.); +#14387 = FACE_BOUND('',#14388,.F.); +#14388 = EDGE_LOOP('',(#14389,#14390,#14418,#14439)); +#14389 = ORIENTED_EDGE('',*,*,#11018,.T.); +#14390 = ORIENTED_EDGE('',*,*,#14391,.T.); +#14391 = EDGE_CURVE('',#10991,#14392,#14394,.T.); +#14392 = VERTEX_POINT('',#14393); +#14393 = CARTESIAN_POINT('',(-2.35,-3.605,0.725)); +#14394 = SURFACE_CURVE('',#14395,(#14400,#14407),.PCURVE_S1.); +#14395 = CIRCLE('',#14396,0.1); +#14396 = AXIS2_PLACEMENT_3D('',#14397,#14398,#14399); +#14397 = CARTESIAN_POINT('',(-2.25,-3.605,0.725)); +#14398 = DIRECTION('',(9.95799250103E-17,-1.,0.)); +#14399 = DIRECTION('',(-4.440892098501E-15,-4.422237021476E-31,1.)); +#14400 = PCURVE('',#11032,#14401); +#14401 = DEFINITIONAL_REPRESENTATION('',(#14402),#14406); +#14402 = LINE('',#14403,#14404); +#14403 = CARTESIAN_POINT('',(0.,-0.41)); +#14404 = VECTOR('',#14405,1.); +#14405 = DIRECTION('',(1.,0.)); +#14406 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14407 = PCURVE('',#11006,#14408); +#14408 = DEFINITIONAL_REPRESENTATION('',(#14409),#14417); +#14409 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#14410,#14411,#14412,#14413 + ,#14414,#14415,#14416),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#14410 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#14411 = CARTESIAN_POINT('',(0.292340342435,-7.415408746888E-03)); +#14412 = CARTESIAN_POINT('',(0.142340342435,7.918713163156E-02)); +#14413 = CARTESIAN_POINT('',(-7.659657565E-03,0.16578967201)); +#14414 = CARTESIAN_POINT('',(0.142340342435,0.252392212388)); +#14415 = CARTESIAN_POINT('',(0.292340342435,0.338994752767)); +#14416 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#14417 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14418 = ORIENTED_EDGE('',*,*,#14419,.F.); +#14419 = EDGE_CURVE('',#13778,#14392,#14420,.T.); +#14420 = SURFACE_CURVE('',#14421,(#14425,#14432),.PCURVE_S1.); +#14421 = LINE('',#14422,#14423); +#14422 = CARTESIAN_POINT('',(-2.35,-4.015,0.725)); +#14423 = VECTOR('',#14424,1.); +#14424 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#14425 = PCURVE('',#11032,#14426); +#14426 = DEFINITIONAL_REPRESENTATION('',(#14427),#14431); +#14427 = LINE('',#14428,#14429); +#14428 = CARTESIAN_POINT('',(1.570796326795,0.)); +#14429 = VECTOR('',#14430,1.); +#14430 = DIRECTION('',(0.,-1.)); +#14431 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14432 = PCURVE('',#13821,#14433); +#14433 = DEFINITIONAL_REPRESENTATION('',(#14434),#14438); +#14434 = LINE('',#14435,#14436); +#14435 = CARTESIAN_POINT('',(-0.,0.)); +#14436 = VECTOR('',#14437,1.); +#14437 = DIRECTION('',(6.767833676919E-44,-1.)); +#14438 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14439 = ORIENTED_EDGE('',*,*,#13777,.F.); +#14440 = ADVANCED_FACE('',(#14441),#11006,.T.); +#14441 = FACE_BOUND('',#14442,.T.); +#14442 = EDGE_LOOP('',(#14443,#14444,#14445,#14446,#14469,#14493,#14516, + #14539,#14562,#14590,#14613,#14637)); +#14443 = ORIENTED_EDGE('',*,*,#11128,.F.); +#14444 = ORIENTED_EDGE('',*,*,#10990,.T.); +#14445 = ORIENTED_EDGE('',*,*,#14391,.T.); +#14446 = ORIENTED_EDGE('',*,*,#14447,.T.); +#14447 = EDGE_CURVE('',#14392,#14448,#14450,.T.); +#14448 = VERTEX_POINT('',#14449); +#14449 = CARTESIAN_POINT('',(-2.35,-3.605,0.3)); +#14450 = SURFACE_CURVE('',#14451,(#14455,#14462),.PCURVE_S1.); +#14451 = LINE('',#14452,#14453); +#14452 = CARTESIAN_POINT('',(-2.35,-3.605,0.725)); +#14453 = VECTOR('',#14454,1.); +#14454 = DIRECTION('',(-1.044915787883E-15,-1.040526357994E-31,-1.)); +#14455 = PCURVE('',#11006,#14456); +#14456 = DEFINITIONAL_REPRESENTATION('',(#14457),#14461); +#14457 = LINE('',#14458,#14459); +#14458 = CARTESIAN_POINT('',(0.192340342435,6.578967201E-02)); +#14459 = VECTOR('',#14460,1.); +#14460 = DIRECTION('',(-1.,-1.044915787883E-15)); +#14461 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14462 = PCURVE('',#13821,#14463); +#14463 = DEFINITIONAL_REPRESENTATION('',(#14464),#14468); +#14464 = LINE('',#14465,#14466); +#14465 = CARTESIAN_POINT('',(-4.266158067775E-32,-0.41)); +#14466 = VECTOR('',#14467,1.); +#14467 = DIRECTION('',(1.,0.)); +#14468 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14469 = ORIENTED_EDGE('',*,*,#14470,.T.); +#14470 = EDGE_CURVE('',#14448,#14471,#14473,.T.); +#14471 = VERTEX_POINT('',#14472); +#14472 = CARTESIAN_POINT('',(-2.65,-3.605,5.551115123126E-17)); +#14473 = SURFACE_CURVE('',#14474,(#14479,#14486),.PCURVE_S1.); +#14474 = CIRCLE('',#14475,0.3); +#14475 = AXIS2_PLACEMENT_3D('',#14476,#14477,#14478); +#14476 = CARTESIAN_POINT('',(-2.65,-3.605,0.3)); +#14477 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#14478 = DIRECTION('',(1.,9.95799250103E-17,3.515706244646E-15)); +#14479 = PCURVE('',#11006,#14480); +#14480 = DEFINITIONAL_REPRESENTATION('',(#14481),#14485); +#14481 = CIRCLE('',#14482,0.3); +#14482 = AXIS2_PLACEMENT_2D('',#14483,#14484); +#14483 = CARTESIAN_POINT('',(-0.232659657565,-0.23421032799)); +#14484 = DIRECTION('',(3.515706244646E-15,1.)); +#14485 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14486 = PCURVE('',#13850,#14487); +#14487 = DEFINITIONAL_REPRESENTATION('',(#14488),#14492); +#14488 = LINE('',#14489,#14490); +#14489 = CARTESIAN_POINT('',(6.28318530718,-0.41)); +#14490 = VECTOR('',#14491,1.); +#14491 = DIRECTION('',(-1.,0.)); +#14492 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14493 = ORIENTED_EDGE('',*,*,#14494,.T.); +#14494 = EDGE_CURVE('',#14471,#14495,#14497,.T.); +#14495 = VERTEX_POINT('',#14496); +#14496 = CARTESIAN_POINT('',(-3.,-3.605,5.551115123126E-17)); +#14497 = SURFACE_CURVE('',#14498,(#14502,#14509),.PCURVE_S1.); +#14498 = LINE('',#14499,#14500); +#14499 = CARTESIAN_POINT('',(-2.65,-3.605,5.551115123126E-17)); +#14500 = VECTOR('',#14501,1.); +#14501 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#14502 = PCURVE('',#11006,#14503); +#14503 = DEFINITIONAL_REPRESENTATION('',(#14504),#14508); +#14504 = LINE('',#14505,#14506); +#14505 = CARTESIAN_POINT('',(-0.532659657565,-0.23421032799)); +#14506 = VECTOR('',#14507,1.); +#14507 = DIRECTION('',(0.,-1.)); +#14508 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14509 = PCURVE('',#13878,#14510); +#14510 = DEFINITIONAL_REPRESENTATION('',(#14511),#14515); +#14511 = LINE('',#14512,#14513); +#14512 = CARTESIAN_POINT('',(-4.082776925422E-17,-0.41)); +#14513 = VECTOR('',#14514,1.); +#14514 = DIRECTION('',(1.,0.)); +#14515 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14516 = ORIENTED_EDGE('',*,*,#14517,.T.); +#14517 = EDGE_CURVE('',#14495,#14518,#14520,.T.); +#14518 = VERTEX_POINT('',#14519); +#14519 = CARTESIAN_POINT('',(-3.,-3.605,0.2)); +#14520 = SURFACE_CURVE('',#14521,(#14525,#14532),.PCURVE_S1.); +#14521 = LINE('',#14522,#14523); +#14522 = CARTESIAN_POINT('',(-3.,-3.605,5.551115123126E-17)); +#14523 = VECTOR('',#14524,1.); +#14524 = DIRECTION('',(0.,0.,1.)); +#14525 = PCURVE('',#11006,#14526); +#14526 = DEFINITIONAL_REPRESENTATION('',(#14527),#14531); +#14527 = LINE('',#14528,#14529); +#14528 = CARTESIAN_POINT('',(-0.532659657565,-0.58421032799)); +#14529 = VECTOR('',#14530,1.); +#14530 = DIRECTION('',(1.,0.)); +#14531 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14532 = PCURVE('',#13906,#14533); +#14533 = DEFINITIONAL_REPRESENTATION('',(#14534),#14538); +#14534 = LINE('',#14535,#14536); +#14535 = CARTESIAN_POINT('',(0.,-0.41)); +#14536 = VECTOR('',#14537,1.); +#14537 = DIRECTION('',(1.,0.)); +#14538 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14539 = ORIENTED_EDGE('',*,*,#14540,.T.); +#14540 = EDGE_CURVE('',#14518,#14541,#14543,.T.); +#14541 = VERTEX_POINT('',#14542); +#14542 = CARTESIAN_POINT('',(-2.65,-3.605,0.2)); +#14543 = SURFACE_CURVE('',#14544,(#14548,#14555),.PCURVE_S1.); +#14544 = LINE('',#14545,#14546); +#14545 = CARTESIAN_POINT('',(-3.,-3.605,0.2)); +#14546 = VECTOR('',#14547,1.); +#14547 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#14548 = PCURVE('',#11006,#14549); +#14549 = DEFINITIONAL_REPRESENTATION('',(#14550),#14554); +#14550 = LINE('',#14551,#14552); +#14551 = CARTESIAN_POINT('',(-0.332659657565,-0.58421032799)); +#14552 = VECTOR('',#14553,1.); +#14553 = DIRECTION('',(0.,1.)); +#14554 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14555 = PCURVE('',#13934,#14556); +#14556 = DEFINITIONAL_REPRESENTATION('',(#14557),#14561); +#14557 = LINE('',#14558,#14559); +#14558 = CARTESIAN_POINT('',(4.082776925422E-17,-0.41)); +#14559 = VECTOR('',#14560,1.); +#14560 = DIRECTION('',(1.,0.)); +#14561 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14562 = ORIENTED_EDGE('',*,*,#14563,.T.); +#14563 = EDGE_CURVE('',#14541,#14564,#14566,.T.); +#14564 = VERTEX_POINT('',#14565); +#14565 = CARTESIAN_POINT('',(-2.55,-3.605,0.3)); +#14566 = SURFACE_CURVE('',#14567,(#14572,#14583),.PCURVE_S1.); +#14567 = CIRCLE('',#14568,0.1); +#14568 = AXIS2_PLACEMENT_3D('',#14569,#14570,#14571); +#14569 = CARTESIAN_POINT('',(-2.65,-3.605,0.3)); +#14570 = DIRECTION('',(9.95799250103E-17,-1.,-0.)); +#14571 = DIRECTION('',(-0.,0.,-1.)); +#14572 = PCURVE('',#11006,#14573); +#14573 = DEFINITIONAL_REPRESENTATION('',(#14574),#14582); +#14574 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#14575,#14576,#14577,#14578 + ,#14579,#14580,#14581),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#14575 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#14576 = CARTESIAN_POINT('',(-0.332659657565,-6.100524723311E-02)); +#14577 = CARTESIAN_POINT('',(-0.182659657565,-0.147607787612)); +#14578 = CARTESIAN_POINT('',(-3.2659657565E-02,-0.23421032799)); +#14579 = CARTESIAN_POINT('',(-0.182659657565,-0.320812868368)); +#14580 = CARTESIAN_POINT('',(-0.332659657565,-0.407415408747)); +#14581 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#14582 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14583 = PCURVE('',#13967,#14584); +#14584 = DEFINITIONAL_REPRESENTATION('',(#14585),#14589); +#14585 = LINE('',#14586,#14587); +#14586 = CARTESIAN_POINT('',(0.,-0.41)); +#14587 = VECTOR('',#14588,1.); +#14588 = DIRECTION('',(1.,0.)); +#14589 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14590 = ORIENTED_EDGE('',*,*,#14591,.T.); +#14591 = EDGE_CURVE('',#14564,#14592,#14594,.T.); +#14592 = VERTEX_POINT('',#14593); +#14593 = CARTESIAN_POINT('',(-2.55,-3.605,0.725)); +#14594 = SURFACE_CURVE('',#14595,(#14599,#14606),.PCURVE_S1.); +#14595 = LINE('',#14596,#14597); +#14596 = CARTESIAN_POINT('',(-2.55,-3.605,0.3)); +#14597 = VECTOR('',#14598,1.); +#14598 = DIRECTION('',(0.,0.,1.)); +#14599 = PCURVE('',#11006,#14600); +#14600 = DEFINITIONAL_REPRESENTATION('',(#14601),#14605); +#14601 = LINE('',#14602,#14603); +#14602 = CARTESIAN_POINT('',(-0.232659657565,-0.13421032799)); +#14603 = VECTOR('',#14604,1.); +#14604 = DIRECTION('',(1.,0.)); +#14605 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14606 = PCURVE('',#13995,#14607); +#14607 = DEFINITIONAL_REPRESENTATION('',(#14608),#14612); +#14608 = LINE('',#14609,#14610); +#14609 = CARTESIAN_POINT('',(0.,-0.41)); +#14610 = VECTOR('',#14611,1.); +#14611 = DIRECTION('',(1.,0.)); +#14612 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14613 = ORIENTED_EDGE('',*,*,#14614,.T.); +#14614 = EDGE_CURVE('',#14592,#14615,#14617,.T.); +#14615 = VERTEX_POINT('',#14616); +#14616 = CARTESIAN_POINT('',(-2.25,-3.605,1.025)); +#14617 = SURFACE_CURVE('',#14618,(#14623,#14630),.PCURVE_S1.); +#14618 = CIRCLE('',#14619,0.3); +#14619 = AXIS2_PLACEMENT_3D('',#14620,#14621,#14622); +#14620 = CARTESIAN_POINT('',(-2.25,-3.605,0.725)); +#14621 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#14622 = DIRECTION('',(-1.,-9.95799250103E-17,3.700743415417E-16)); +#14623 = PCURVE('',#11006,#14624); +#14624 = DEFINITIONAL_REPRESENTATION('',(#14625),#14629); +#14625 = CIRCLE('',#14626,0.3); +#14626 = AXIS2_PLACEMENT_2D('',#14627,#14628); +#14627 = CARTESIAN_POINT('',(0.192340342435,0.16578967201)); +#14628 = DIRECTION('',(3.700743415417E-16,-1.)); +#14629 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14630 = PCURVE('',#14024,#14631); +#14631 = DEFINITIONAL_REPRESENTATION('',(#14632),#14636); +#14632 = LINE('',#14633,#14634); +#14633 = CARTESIAN_POINT('',(6.28318530718,-0.41)); +#14634 = VECTOR('',#14635,1.); +#14635 = DIRECTION('',(-1.,0.)); +#14636 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14637 = ORIENTED_EDGE('',*,*,#14638,.T.); +#14638 = EDGE_CURVE('',#14615,#11129,#14639,.T.); +#14639 = SURFACE_CURVE('',#14640,(#14644,#14651),.PCURVE_S1.); +#14640 = LINE('',#14641,#14642); +#14641 = CARTESIAN_POINT('',(-2.25,-3.605,1.025)); +#14642 = VECTOR('',#14643,1.); +#14643 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#14644 = PCURVE('',#11006,#14645); +#14645 = DEFINITIONAL_REPRESENTATION('',(#14646),#14650); +#14646 = LINE('',#14647,#14648); +#14647 = CARTESIAN_POINT('',(0.492340342435,0.16578967201)); +#14648 = VECTOR('',#14649,1.); +#14649 = DIRECTION('',(0.,1.)); +#14650 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14651 = PCURVE('',#13212,#14652); +#14652 = DEFINITIONAL_REPRESENTATION('',(#14653),#14657); +#14653 = LINE('',#14654,#14655); +#14654 = CARTESIAN_POINT('',(4.082776925422E-17,-0.41)); +#14655 = VECTOR('',#14656,1.); +#14656 = DIRECTION('',(1.,0.)); +#14657 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14658 = ADVANCED_FACE('',(#14659),#11063,.F.); +#14659 = FACE_BOUND('',#14660,.F.); +#14660 = EDGE_LOOP('',(#14661,#14662,#14663,#14691,#14714,#14738,#14761, + #14784,#14807,#14835,#14858,#14882)); +#14661 = ORIENTED_EDGE('',*,*,#11238,.F.); +#14662 = ORIENTED_EDGE('',*,*,#11047,.T.); +#14663 = ORIENTED_EDGE('',*,*,#14664,.T.); +#14664 = EDGE_CURVE('',#11048,#14665,#14667,.T.); +#14665 = VERTEX_POINT('',#14666); +#14666 = CARTESIAN_POINT('',(-2.35,3.605,0.725)); +#14667 = SURFACE_CURVE('',#14668,(#14673,#14684),.PCURVE_S1.); +#14668 = CIRCLE('',#14669,0.1); +#14669 = AXIS2_PLACEMENT_3D('',#14670,#14671,#14672); +#14670 = CARTESIAN_POINT('',(-2.25,3.605,0.725)); +#14671 = DIRECTION('',(9.95799250103E-17,-1.,0.)); +#14672 = DIRECTION('',(-4.440892098501E-15,-4.422237021476E-31,1.)); +#14673 = PCURVE('',#11063,#14674); +#14674 = DEFINITIONAL_REPRESENTATION('',(#14675),#14683); +#14675 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#14676,#14677,#14678,#14679 + ,#14680,#14681,#14682),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#14676 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#14677 = CARTESIAN_POINT('',(0.292340342435,-7.415408746888E-03)); +#14678 = CARTESIAN_POINT('',(0.142340342435,7.918713163156E-02)); +#14679 = CARTESIAN_POINT('',(-7.659657565E-03,0.16578967201)); +#14680 = CARTESIAN_POINT('',(0.142340342435,0.252392212388)); +#14681 = CARTESIAN_POINT('',(0.292340342435,0.338994752767)); +#14682 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#14683 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14684 = PCURVE('',#11113,#14685); +#14685 = DEFINITIONAL_REPRESENTATION('',(#14686),#14690); +#14686 = LINE('',#14687,#14688); +#14687 = CARTESIAN_POINT('',(0.,0.)); +#14688 = VECTOR('',#14689,1.); +#14689 = DIRECTION('',(1.,0.)); +#14690 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14691 = ORIENTED_EDGE('',*,*,#14692,.T.); +#14692 = EDGE_CURVE('',#14665,#14693,#14695,.T.); +#14693 = VERTEX_POINT('',#14694); +#14694 = CARTESIAN_POINT('',(-2.35,3.605,0.3)); +#14695 = SURFACE_CURVE('',#14696,(#14700,#14707),.PCURVE_S1.); +#14696 = LINE('',#14697,#14698); +#14697 = CARTESIAN_POINT('',(-2.35,3.605,0.725)); +#14698 = VECTOR('',#14699,1.); +#14699 = DIRECTION('',(-1.044915787883E-15,-1.040526357994E-31,-1.)); +#14700 = PCURVE('',#11063,#14701); +#14701 = DEFINITIONAL_REPRESENTATION('',(#14702),#14706); +#14702 = LINE('',#14703,#14704); +#14703 = CARTESIAN_POINT('',(0.192340342435,6.578967201E-02)); +#14704 = VECTOR('',#14705,1.); +#14705 = DIRECTION('',(-1.,-1.044915787883E-15)); +#14706 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14707 = PCURVE('',#14106,#14708); +#14708 = DEFINITIONAL_REPRESENTATION('',(#14709),#14713); +#14709 = LINE('',#14710,#14711); +#14710 = CARTESIAN_POINT('',(-0.,0.)); +#14711 = VECTOR('',#14712,1.); +#14712 = DIRECTION('',(1.,0.)); +#14713 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14714 = ORIENTED_EDGE('',*,*,#14715,.T.); +#14715 = EDGE_CURVE('',#14693,#14716,#14718,.T.); +#14716 = VERTEX_POINT('',#14717); +#14717 = CARTESIAN_POINT('',(-2.65,3.605,5.551115123126E-17)); +#14718 = SURFACE_CURVE('',#14719,(#14724,#14731),.PCURVE_S1.); +#14719 = CIRCLE('',#14720,0.3); +#14720 = AXIS2_PLACEMENT_3D('',#14721,#14722,#14723); +#14721 = CARTESIAN_POINT('',(-2.65,3.605,0.3)); +#14722 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#14723 = DIRECTION('',(1.,9.95799250103E-17,3.515706244646E-15)); +#14724 = PCURVE('',#11063,#14725); +#14725 = DEFINITIONAL_REPRESENTATION('',(#14726),#14730); +#14726 = CIRCLE('',#14727,0.3); +#14727 = AXIS2_PLACEMENT_2D('',#14728,#14729); +#14728 = CARTESIAN_POINT('',(-0.232659657565,-0.23421032799)); +#14729 = DIRECTION('',(3.515706244646E-15,1.)); +#14730 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14731 = PCURVE('',#14135,#14732); +#14732 = DEFINITIONAL_REPRESENTATION('',(#14733),#14737); +#14733 = LINE('',#14734,#14735); +#14734 = CARTESIAN_POINT('',(6.28318530718,0.)); +#14735 = VECTOR('',#14736,1.); +#14736 = DIRECTION('',(-1.,0.)); +#14737 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14738 = ORIENTED_EDGE('',*,*,#14739,.T.); +#14739 = EDGE_CURVE('',#14716,#14740,#14742,.T.); +#14740 = VERTEX_POINT('',#14741); +#14741 = CARTESIAN_POINT('',(-3.,3.605,5.551115123126E-17)); +#14742 = SURFACE_CURVE('',#14743,(#14747,#14754),.PCURVE_S1.); +#14743 = LINE('',#14744,#14745); +#14744 = CARTESIAN_POINT('',(-2.65,3.605,5.551115123126E-17)); +#14745 = VECTOR('',#14746,1.); +#14746 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#14747 = PCURVE('',#11063,#14748); +#14748 = DEFINITIONAL_REPRESENTATION('',(#14749),#14753); +#14749 = LINE('',#14750,#14751); +#14750 = CARTESIAN_POINT('',(-0.532659657565,-0.23421032799)); +#14751 = VECTOR('',#14752,1.); +#14752 = DIRECTION('',(0.,-1.)); +#14753 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14754 = PCURVE('',#14163,#14755); +#14755 = DEFINITIONAL_REPRESENTATION('',(#14756),#14760); +#14756 = LINE('',#14757,#14758); +#14757 = CARTESIAN_POINT('',(0.,0.)); +#14758 = VECTOR('',#14759,1.); +#14759 = DIRECTION('',(1.,0.)); +#14760 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14761 = ORIENTED_EDGE('',*,*,#14762,.T.); +#14762 = EDGE_CURVE('',#14740,#14763,#14765,.T.); +#14763 = VERTEX_POINT('',#14764); +#14764 = CARTESIAN_POINT('',(-3.,3.605,0.2)); +#14765 = SURFACE_CURVE('',#14766,(#14770,#14777),.PCURVE_S1.); +#14766 = LINE('',#14767,#14768); +#14767 = CARTESIAN_POINT('',(-3.,3.605,5.551115123126E-17)); +#14768 = VECTOR('',#14769,1.); +#14769 = DIRECTION('',(0.,0.,1.)); +#14770 = PCURVE('',#11063,#14771); +#14771 = DEFINITIONAL_REPRESENTATION('',(#14772),#14776); +#14772 = LINE('',#14773,#14774); +#14773 = CARTESIAN_POINT('',(-0.532659657565,-0.58421032799)); +#14774 = VECTOR('',#14775,1.); +#14775 = DIRECTION('',(1.,0.)); +#14776 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14777 = PCURVE('',#14191,#14778); +#14778 = DEFINITIONAL_REPRESENTATION('',(#14779),#14783); +#14779 = LINE('',#14780,#14781); +#14780 = CARTESIAN_POINT('',(0.,0.)); +#14781 = VECTOR('',#14782,1.); +#14782 = DIRECTION('',(1.,0.)); +#14783 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14784 = ORIENTED_EDGE('',*,*,#14785,.T.); +#14785 = EDGE_CURVE('',#14763,#14786,#14788,.T.); +#14786 = VERTEX_POINT('',#14787); +#14787 = CARTESIAN_POINT('',(-2.65,3.605,0.2)); +#14788 = SURFACE_CURVE('',#14789,(#14793,#14800),.PCURVE_S1.); +#14789 = LINE('',#14790,#14791); +#14790 = CARTESIAN_POINT('',(-3.,3.605,0.2)); +#14791 = VECTOR('',#14792,1.); +#14792 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#14793 = PCURVE('',#11063,#14794); +#14794 = DEFINITIONAL_REPRESENTATION('',(#14795),#14799); +#14795 = LINE('',#14796,#14797); +#14796 = CARTESIAN_POINT('',(-0.332659657565,-0.58421032799)); +#14797 = VECTOR('',#14798,1.); +#14798 = DIRECTION('',(0.,1.)); +#14799 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14800 = PCURVE('',#14219,#14801); +#14801 = DEFINITIONAL_REPRESENTATION('',(#14802),#14806); +#14802 = LINE('',#14803,#14804); +#14803 = CARTESIAN_POINT('',(0.,0.)); +#14804 = VECTOR('',#14805,1.); +#14805 = DIRECTION('',(1.,0.)); +#14806 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14807 = ORIENTED_EDGE('',*,*,#14808,.T.); +#14808 = EDGE_CURVE('',#14786,#14809,#14811,.T.); +#14809 = VERTEX_POINT('',#14810); +#14810 = CARTESIAN_POINT('',(-2.55,3.605,0.3)); +#14811 = SURFACE_CURVE('',#14812,(#14817,#14828),.PCURVE_S1.); +#14812 = CIRCLE('',#14813,0.1); +#14813 = AXIS2_PLACEMENT_3D('',#14814,#14815,#14816); +#14814 = CARTESIAN_POINT('',(-2.65,3.605,0.3)); +#14815 = DIRECTION('',(9.95799250103E-17,-1.,-0.)); +#14816 = DIRECTION('',(-0.,0.,-1.)); +#14817 = PCURVE('',#11063,#14818); +#14818 = DEFINITIONAL_REPRESENTATION('',(#14819),#14827); +#14819 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#14820,#14821,#14822,#14823 + ,#14824,#14825,#14826),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#14820 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#14821 = CARTESIAN_POINT('',(-0.332659657565,-6.100524723311E-02)); +#14822 = CARTESIAN_POINT('',(-0.182659657565,-0.147607787612)); +#14823 = CARTESIAN_POINT('',(-3.2659657565E-02,-0.23421032799)); +#14824 = CARTESIAN_POINT('',(-0.182659657565,-0.320812868368)); +#14825 = CARTESIAN_POINT('',(-0.332659657565,-0.407415408747)); +#14826 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#14827 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14828 = PCURVE('',#14252,#14829); +#14829 = DEFINITIONAL_REPRESENTATION('',(#14830),#14834); +#14830 = LINE('',#14831,#14832); +#14831 = CARTESIAN_POINT('',(0.,0.)); +#14832 = VECTOR('',#14833,1.); +#14833 = DIRECTION('',(1.,0.)); +#14834 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14835 = ORIENTED_EDGE('',*,*,#14836,.T.); +#14836 = EDGE_CURVE('',#14809,#14837,#14839,.T.); +#14837 = VERTEX_POINT('',#14838); +#14838 = CARTESIAN_POINT('',(-2.55,3.605,0.725)); +#14839 = SURFACE_CURVE('',#14840,(#14844,#14851),.PCURVE_S1.); +#14840 = LINE('',#14841,#14842); +#14841 = CARTESIAN_POINT('',(-2.55,3.605,0.3)); +#14842 = VECTOR('',#14843,1.); +#14843 = DIRECTION('',(0.,0.,1.)); +#14844 = PCURVE('',#11063,#14845); +#14845 = DEFINITIONAL_REPRESENTATION('',(#14846),#14850); +#14846 = LINE('',#14847,#14848); +#14847 = CARTESIAN_POINT('',(-0.232659657565,-0.13421032799)); +#14848 = VECTOR('',#14849,1.); +#14849 = DIRECTION('',(1.,0.)); +#14850 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14851 = PCURVE('',#14280,#14852); +#14852 = DEFINITIONAL_REPRESENTATION('',(#14853),#14857); +#14853 = LINE('',#14854,#14855); +#14854 = CARTESIAN_POINT('',(0.,0.)); +#14855 = VECTOR('',#14856,1.); +#14856 = DIRECTION('',(1.,0.)); +#14857 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14858 = ORIENTED_EDGE('',*,*,#14859,.T.); +#14859 = EDGE_CURVE('',#14837,#14860,#14862,.T.); +#14860 = VERTEX_POINT('',#14861); +#14861 = CARTESIAN_POINT('',(-2.25,3.605,1.025)); +#14862 = SURFACE_CURVE('',#14863,(#14868,#14875),.PCURVE_S1.); +#14863 = CIRCLE('',#14864,0.3); +#14864 = AXIS2_PLACEMENT_3D('',#14865,#14866,#14867); +#14865 = CARTESIAN_POINT('',(-2.25,3.605,0.725)); +#14866 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#14867 = DIRECTION('',(-1.,-9.95799250103E-17,3.700743415417E-16)); +#14868 = PCURVE('',#11063,#14869); +#14869 = DEFINITIONAL_REPRESENTATION('',(#14870),#14874); +#14870 = CIRCLE('',#14871,0.3); +#14871 = AXIS2_PLACEMENT_2D('',#14872,#14873); +#14872 = CARTESIAN_POINT('',(0.192340342435,0.16578967201)); +#14873 = DIRECTION('',(3.700743415417E-16,-1.)); +#14874 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14875 = PCURVE('',#14309,#14876); +#14876 = DEFINITIONAL_REPRESENTATION('',(#14877),#14881); +#14877 = LINE('',#14878,#14879); +#14878 = CARTESIAN_POINT('',(6.28318530718,0.)); +#14879 = VECTOR('',#14880,1.); +#14880 = DIRECTION('',(-1.,0.)); +#14881 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14882 = ORIENTED_EDGE('',*,*,#14883,.T.); +#14883 = EDGE_CURVE('',#14860,#11239,#14884,.T.); +#14884 = SURFACE_CURVE('',#14885,(#14889,#14896),.PCURVE_S1.); +#14885 = LINE('',#14886,#14887); +#14886 = CARTESIAN_POINT('',(-2.25,3.605,1.025)); +#14887 = VECTOR('',#14888,1.); +#14888 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#14889 = PCURVE('',#11063,#14890); +#14890 = DEFINITIONAL_REPRESENTATION('',(#14891),#14895); +#14891 = LINE('',#14892,#14893); +#14892 = CARTESIAN_POINT('',(0.492340342435,0.16578967201)); +#14893 = VECTOR('',#14894,1.); +#14894 = DIRECTION('',(0.,1.)); +#14895 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14896 = PCURVE('',#13512,#14897); +#14897 = DEFINITIONAL_REPRESENTATION('',(#14898),#14902); +#14898 = LINE('',#14899,#14900); +#14899 = CARTESIAN_POINT('',(0.,0.)); +#14900 = VECTOR('',#14901,1.); +#14901 = DIRECTION('',(1.,0.)); +#14902 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14903 = ADVANCED_FACE('',(#14904),#11113,.F.); +#14904 = FACE_BOUND('',#14905,.F.); +#14905 = EDGE_LOOP('',(#14906,#14907,#14908,#14929)); +#14906 = ORIENTED_EDGE('',*,*,#11099,.T.); +#14907 = ORIENTED_EDGE('',*,*,#14062,.T.); +#14908 = ORIENTED_EDGE('',*,*,#14909,.F.); +#14909 = EDGE_CURVE('',#14665,#14063,#14910,.T.); +#14910 = SURFACE_CURVE('',#14911,(#14915,#14922),.PCURVE_S1.); +#14911 = LINE('',#14912,#14913); +#14912 = CARTESIAN_POINT('',(-2.35,3.605,0.725)); +#14913 = VECTOR('',#14914,1.); +#14914 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#14915 = PCURVE('',#11113,#14916); +#14916 = DEFINITIONAL_REPRESENTATION('',(#14917),#14921); +#14917 = LINE('',#14918,#14919); +#14918 = CARTESIAN_POINT('',(1.570796326795,0.)); +#14919 = VECTOR('',#14920,1.); +#14920 = DIRECTION('',(0.,-1.)); +#14921 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14922 = PCURVE('',#14106,#14923); +#14923 = DEFINITIONAL_REPRESENTATION('',(#14924),#14928); +#14924 = LINE('',#14925,#14926); +#14925 = CARTESIAN_POINT('',(-0.,0.)); +#14926 = VECTOR('',#14927,1.); +#14927 = DIRECTION('',(6.767833676919E-44,-1.)); +#14928 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14929 = ORIENTED_EDGE('',*,*,#14664,.F.); +#14930 = ADVANCED_FACE('',(#14931),#11194,.F.); +#14931 = FACE_BOUND('',#14932,.F.); +#14932 = EDGE_LOOP('',(#14933,#14953,#14954,#14974)); +#14933 = ORIENTED_EDGE('',*,*,#14934,.F.); +#14934 = EDGE_CURVE('',#11129,#13197,#14935,.T.); +#14935 = SURFACE_CURVE('',#14936,(#14940,#14946),.PCURVE_S1.); +#14936 = LINE('',#14937,#14938); +#14937 = CARTESIAN_POINT('',(-2.25,-3.605,1.025)); +#14938 = VECTOR('',#14939,1.); +#14939 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#14940 = PCURVE('',#11194,#14941); +#14941 = DEFINITIONAL_REPRESENTATION('',(#14942),#14945); +#14942 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#14943,#14944),.UNSPECIFIED., + .F.,.F.,(2,2),(0.3,0.375),.PIECEWISE_BEZIER_KNOTS.); +#14943 = CARTESIAN_POINT('',(0.57,9.11570622888E-16)); +#14944 = CARTESIAN_POINT('',(0.537326283988,1.)); +#14945 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14946 = PCURVE('',#13212,#14947); +#14947 = DEFINITIONAL_REPRESENTATION('',(#14948),#14952); +#14948 = LINE('',#14949,#14950); +#14949 = CARTESIAN_POINT('',(4.082776925422E-17,-0.41)); +#14950 = VECTOR('',#14951,1.); +#14951 = DIRECTION('',(1.,0.)); +#14952 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14953 = ORIENTED_EDGE('',*,*,#11180,.T.); +#14954 = ORIENTED_EDGE('',*,*,#14955,.T.); +#14955 = EDGE_CURVE('',#11153,#13225,#14956,.T.); +#14956 = SURFACE_CURVE('',#14957,(#14961,#14967),.PCURVE_S1.); +#14957 = LINE('',#14958,#14959); +#14958 = CARTESIAN_POINT('',(-2.25,-2.745,1.025)); +#14959 = VECTOR('',#14960,1.); +#14960 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#14961 = PCURVE('',#11194,#14962); +#14962 = DEFINITIONAL_REPRESENTATION('',(#14963),#14966); +#14963 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#14964,#14965),.UNSPECIFIED., + .F.,.F.,(2,2),(0.3,0.375),.PIECEWISE_BEZIER_KNOTS.); +#14964 = CARTESIAN_POINT('',(1.43,2.450302786902E-15)); +#14965 = CARTESIAN_POINT('',(1.405120845921,1.)); +#14966 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14967 = PCURVE('',#13262,#14968); +#14968 = DEFINITIONAL_REPRESENTATION('',(#14969),#14973); +#14969 = LINE('',#14970,#14971); +#14970 = CARTESIAN_POINT('',(0.,0.)); +#14971 = VECTOR('',#14972,1.); +#14972 = DIRECTION('',(1.,0.)); +#14973 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#14974 = ORIENTED_EDGE('',*,*,#13224,.F.); +#14975 = ADVANCED_FACE('',(#14976),#11168,.F.); +#14976 = FACE_BOUND('',#14977,.F.); +#14977 = EDGE_LOOP('',(#14978,#14979,#14980,#15008,#15036,#15065,#15093, + #15121,#15149,#15182,#15210,#15239)); +#14978 = ORIENTED_EDGE('',*,*,#11152,.F.); +#14979 = ORIENTED_EDGE('',*,*,#11290,.T.); +#14980 = ORIENTED_EDGE('',*,*,#14981,.T.); +#14981 = EDGE_CURVE('',#11291,#14982,#14984,.T.); +#14982 = VERTEX_POINT('',#14983); +#14983 = CARTESIAN_POINT('',(-2.35,-2.745,0.725)); +#14984 = SURFACE_CURVE('',#14985,(#14990,#15001),.PCURVE_S1.); +#14985 = CIRCLE('',#14986,0.1); +#14986 = AXIS2_PLACEMENT_3D('',#14987,#14988,#14989); +#14987 = CARTESIAN_POINT('',(-2.25,-2.745,0.725)); +#14988 = DIRECTION('',(9.95799250103E-17,-1.,0.)); +#14989 = DIRECTION('',(-4.440892098501E-15,-4.422237021476E-31,1.)); +#14990 = PCURVE('',#11168,#14991); +#14991 = DEFINITIONAL_REPRESENTATION('',(#14992),#15000); +#14992 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#14993,#14994,#14995,#14996 + ,#14997,#14998,#14999),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#14993 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#14994 = CARTESIAN_POINT('',(0.292340342435,-7.415408746888E-03)); +#14995 = CARTESIAN_POINT('',(0.142340342435,7.918713163156E-02)); +#14996 = CARTESIAN_POINT('',(-7.659657565E-03,0.16578967201)); +#14997 = CARTESIAN_POINT('',(0.142340342435,0.252392212388)); +#14998 = CARTESIAN_POINT('',(0.292340342435,0.338994752767)); +#14999 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#15000 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15001 = PCURVE('',#11356,#15002); +#15002 = DEFINITIONAL_REPRESENTATION('',(#15003),#15007); +#15003 = LINE('',#15004,#15005); +#15004 = CARTESIAN_POINT('',(0.,0.)); +#15005 = VECTOR('',#15006,1.); +#15006 = DIRECTION('',(1.,0.)); +#15007 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15008 = ORIENTED_EDGE('',*,*,#15009,.T.); +#15009 = EDGE_CURVE('',#14982,#15010,#15012,.T.); +#15010 = VERTEX_POINT('',#15011); +#15011 = CARTESIAN_POINT('',(-2.35,-2.745,0.3)); +#15012 = SURFACE_CURVE('',#15013,(#15017,#15024),.PCURVE_S1.); +#15013 = LINE('',#15014,#15015); +#15014 = CARTESIAN_POINT('',(-2.35,-2.745,0.725)); +#15015 = VECTOR('',#15016,1.); +#15016 = DIRECTION('',(-1.044915787883E-15,-1.040526357994E-31,-1.)); +#15017 = PCURVE('',#11168,#15018); +#15018 = DEFINITIONAL_REPRESENTATION('',(#15019),#15023); +#15019 = LINE('',#15020,#15021); +#15020 = CARTESIAN_POINT('',(0.192340342435,6.578967201E-02)); +#15021 = VECTOR('',#15022,1.); +#15022 = DIRECTION('',(-1.,-1.044915787883E-15)); +#15023 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15024 = PCURVE('',#15025,#15030); +#15025 = PLANE('',#15026); +#15026 = AXIS2_PLACEMENT_3D('',#15027,#15028,#15029); +#15027 = CARTESIAN_POINT('',(-2.35,-2.745,0.725)); +#15028 = DIRECTION('',(-1.,-9.95799250103E-17,1.044915787883E-15)); +#15029 = DIRECTION('',(-1.044915787883E-15,-1.040526357994E-31,-1.)); +#15030 = DEFINITIONAL_REPRESENTATION('',(#15031),#15035); +#15031 = LINE('',#15032,#15033); +#15032 = CARTESIAN_POINT('',(-0.,0.)); +#15033 = VECTOR('',#15034,1.); +#15034 = DIRECTION('',(1.,0.)); +#15035 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15036 = ORIENTED_EDGE('',*,*,#15037,.T.); +#15037 = EDGE_CURVE('',#15010,#15038,#15040,.T.); +#15038 = VERTEX_POINT('',#15039); +#15039 = CARTESIAN_POINT('',(-2.65,-2.745,5.551115123126E-17)); +#15040 = SURFACE_CURVE('',#15041,(#15046,#15053),.PCURVE_S1.); +#15041 = CIRCLE('',#15042,0.3); +#15042 = AXIS2_PLACEMENT_3D('',#15043,#15044,#15045); +#15043 = CARTESIAN_POINT('',(-2.65,-2.745,0.3)); +#15044 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#15045 = DIRECTION('',(1.,9.95799250103E-17,3.515706244646E-15)); +#15046 = PCURVE('',#11168,#15047); +#15047 = DEFINITIONAL_REPRESENTATION('',(#15048),#15052); +#15048 = CIRCLE('',#15049,0.3); +#15049 = AXIS2_PLACEMENT_2D('',#15050,#15051); +#15050 = CARTESIAN_POINT('',(-0.232659657565,-0.23421032799)); +#15051 = DIRECTION('',(3.515706244646E-15,1.)); +#15052 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15053 = PCURVE('',#15054,#15059); +#15054 = CYLINDRICAL_SURFACE('',#15055,0.3); +#15055 = AXIS2_PLACEMENT_3D('',#15056,#15057,#15058); +#15056 = CARTESIAN_POINT('',(-2.65,-2.745,0.3)); +#15057 = DIRECTION('',(9.95799250103E-17,-1.,-0.)); +#15058 = DIRECTION('',(1.,9.95799250103E-17,3.515706244646E-15)); +#15059 = DEFINITIONAL_REPRESENTATION('',(#15060),#15064); +#15060 = LINE('',#15061,#15062); +#15061 = CARTESIAN_POINT('',(6.28318530718,0.)); +#15062 = VECTOR('',#15063,1.); +#15063 = DIRECTION('',(-1.,0.)); +#15064 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15065 = ORIENTED_EDGE('',*,*,#15066,.T.); +#15066 = EDGE_CURVE('',#15038,#15067,#15069,.T.); +#15067 = VERTEX_POINT('',#15068); +#15068 = CARTESIAN_POINT('',(-3.,-2.745,5.551115123126E-17)); +#15069 = SURFACE_CURVE('',#15070,(#15074,#15081),.PCURVE_S1.); +#15070 = LINE('',#15071,#15072); +#15071 = CARTESIAN_POINT('',(-2.65,-2.745,5.551115123126E-17)); +#15072 = VECTOR('',#15073,1.); +#15073 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#15074 = PCURVE('',#11168,#15075); +#15075 = DEFINITIONAL_REPRESENTATION('',(#15076),#15080); +#15076 = LINE('',#15077,#15078); +#15077 = CARTESIAN_POINT('',(-0.532659657565,-0.23421032799)); +#15078 = VECTOR('',#15079,1.); +#15079 = DIRECTION('',(0.,-1.)); +#15080 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15081 = PCURVE('',#15082,#15087); +#15082 = PLANE('',#15083); +#15083 = AXIS2_PLACEMENT_3D('',#15084,#15085,#15086); +#15084 = CARTESIAN_POINT('',(-2.65,-2.745,5.551115123126E-17)); +#15085 = DIRECTION('',(0.,0.,1.)); +#15086 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#15087 = DEFINITIONAL_REPRESENTATION('',(#15088),#15092); +#15088 = LINE('',#15089,#15090); +#15089 = CARTESIAN_POINT('',(0.,0.)); +#15090 = VECTOR('',#15091,1.); +#15091 = DIRECTION('',(1.,0.)); +#15092 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15093 = ORIENTED_EDGE('',*,*,#15094,.T.); +#15094 = EDGE_CURVE('',#15067,#15095,#15097,.T.); +#15095 = VERTEX_POINT('',#15096); +#15096 = CARTESIAN_POINT('',(-3.,-2.745,0.2)); +#15097 = SURFACE_CURVE('',#15098,(#15102,#15109),.PCURVE_S1.); +#15098 = LINE('',#15099,#15100); +#15099 = CARTESIAN_POINT('',(-3.,-2.745,5.551115123126E-17)); +#15100 = VECTOR('',#15101,1.); +#15101 = DIRECTION('',(0.,0.,1.)); +#15102 = PCURVE('',#11168,#15103); +#15103 = DEFINITIONAL_REPRESENTATION('',(#15104),#15108); +#15104 = LINE('',#15105,#15106); +#15105 = CARTESIAN_POINT('',(-0.532659657565,-0.58421032799)); +#15106 = VECTOR('',#15107,1.); +#15107 = DIRECTION('',(1.,0.)); +#15108 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15109 = PCURVE('',#15110,#15115); +#15110 = PLANE('',#15111); +#15111 = AXIS2_PLACEMENT_3D('',#15112,#15113,#15114); +#15112 = CARTESIAN_POINT('',(-3.,-2.745,5.551115123126E-17)); +#15113 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#15114 = DIRECTION('',(0.,-0.,1.)); +#15115 = DEFINITIONAL_REPRESENTATION('',(#15116),#15120); +#15116 = LINE('',#15117,#15118); +#15117 = CARTESIAN_POINT('',(0.,0.)); +#15118 = VECTOR('',#15119,1.); +#15119 = DIRECTION('',(1.,0.)); +#15120 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15121 = ORIENTED_EDGE('',*,*,#15122,.T.); +#15122 = EDGE_CURVE('',#15095,#15123,#15125,.T.); +#15123 = VERTEX_POINT('',#15124); +#15124 = CARTESIAN_POINT('',(-2.65,-2.745,0.2)); +#15125 = SURFACE_CURVE('',#15126,(#15130,#15137),.PCURVE_S1.); +#15126 = LINE('',#15127,#15128); +#15127 = CARTESIAN_POINT('',(-3.,-2.745,0.2)); +#15128 = VECTOR('',#15129,1.); +#15129 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#15130 = PCURVE('',#11168,#15131); +#15131 = DEFINITIONAL_REPRESENTATION('',(#15132),#15136); +#15132 = LINE('',#15133,#15134); +#15133 = CARTESIAN_POINT('',(-0.332659657565,-0.58421032799)); +#15134 = VECTOR('',#15135,1.); +#15135 = DIRECTION('',(0.,1.)); +#15136 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15137 = PCURVE('',#15138,#15143); +#15138 = PLANE('',#15139); +#15139 = AXIS2_PLACEMENT_3D('',#15140,#15141,#15142); +#15140 = CARTESIAN_POINT('',(-3.,-2.745,0.2)); +#15141 = DIRECTION('',(-0.,0.,-1.)); +#15142 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#15143 = DEFINITIONAL_REPRESENTATION('',(#15144),#15148); +#15144 = LINE('',#15145,#15146); +#15145 = CARTESIAN_POINT('',(0.,0.)); +#15146 = VECTOR('',#15147,1.); +#15147 = DIRECTION('',(1.,0.)); +#15148 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15149 = ORIENTED_EDGE('',*,*,#15150,.T.); +#15150 = EDGE_CURVE('',#15123,#15151,#15153,.T.); +#15151 = VERTEX_POINT('',#15152); +#15152 = CARTESIAN_POINT('',(-2.55,-2.745,0.3)); +#15153 = SURFACE_CURVE('',#15154,(#15159,#15170),.PCURVE_S1.); +#15154 = CIRCLE('',#15155,0.1); +#15155 = AXIS2_PLACEMENT_3D('',#15156,#15157,#15158); +#15156 = CARTESIAN_POINT('',(-2.65,-2.745,0.3)); +#15157 = DIRECTION('',(9.95799250103E-17,-1.,-0.)); +#15158 = DIRECTION('',(-0.,0.,-1.)); +#15159 = PCURVE('',#11168,#15160); +#15160 = DEFINITIONAL_REPRESENTATION('',(#15161),#15169); +#15161 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#15162,#15163,#15164,#15165 + ,#15166,#15167,#15168),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#15162 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#15163 = CARTESIAN_POINT('',(-0.332659657565,-6.100524723311E-02)); +#15164 = CARTESIAN_POINT('',(-0.182659657565,-0.147607787612)); +#15165 = CARTESIAN_POINT('',(-3.2659657565E-02,-0.23421032799)); +#15166 = CARTESIAN_POINT('',(-0.182659657565,-0.320812868368)); +#15167 = CARTESIAN_POINT('',(-0.332659657565,-0.407415408747)); +#15168 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#15169 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15170 = PCURVE('',#15171,#15176); +#15171 = CYLINDRICAL_SURFACE('',#15172,0.1); +#15172 = AXIS2_PLACEMENT_3D('',#15173,#15174,#15175); +#15173 = CARTESIAN_POINT('',(-2.65,-2.745,0.3)); +#15174 = DIRECTION('',(9.95799250103E-17,-1.,0.)); +#15175 = DIRECTION('',(0.,-0.,-1.)); +#15176 = DEFINITIONAL_REPRESENTATION('',(#15177),#15181); +#15177 = LINE('',#15178,#15179); +#15178 = CARTESIAN_POINT('',(0.,0.)); +#15179 = VECTOR('',#15180,1.); +#15180 = DIRECTION('',(1.,0.)); +#15181 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15182 = ORIENTED_EDGE('',*,*,#15183,.T.); +#15183 = EDGE_CURVE('',#15151,#15184,#15186,.T.); +#15184 = VERTEX_POINT('',#15185); +#15185 = CARTESIAN_POINT('',(-2.55,-2.745,0.725)); +#15186 = SURFACE_CURVE('',#15187,(#15191,#15198),.PCURVE_S1.); +#15187 = LINE('',#15188,#15189); +#15188 = CARTESIAN_POINT('',(-2.55,-2.745,0.3)); +#15189 = VECTOR('',#15190,1.); +#15190 = DIRECTION('',(0.,0.,1.)); +#15191 = PCURVE('',#11168,#15192); +#15192 = DEFINITIONAL_REPRESENTATION('',(#15193),#15197); +#15193 = LINE('',#15194,#15195); +#15194 = CARTESIAN_POINT('',(-0.232659657565,-0.13421032799)); +#15195 = VECTOR('',#15196,1.); +#15196 = DIRECTION('',(1.,0.)); +#15197 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15198 = PCURVE('',#15199,#15204); +#15199 = PLANE('',#15200); +#15200 = AXIS2_PLACEMENT_3D('',#15201,#15202,#15203); +#15201 = CARTESIAN_POINT('',(-2.55,-2.745,0.3)); +#15202 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#15203 = DIRECTION('',(0.,-0.,1.)); +#15204 = DEFINITIONAL_REPRESENTATION('',(#15205),#15209); +#15205 = LINE('',#15206,#15207); +#15206 = CARTESIAN_POINT('',(0.,0.)); +#15207 = VECTOR('',#15208,1.); +#15208 = DIRECTION('',(1.,0.)); +#15209 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15210 = ORIENTED_EDGE('',*,*,#15211,.T.); +#15211 = EDGE_CURVE('',#15184,#15212,#15214,.T.); +#15212 = VERTEX_POINT('',#15213); +#15213 = CARTESIAN_POINT('',(-2.25,-2.745,1.025)); +#15214 = SURFACE_CURVE('',#15215,(#15220,#15227),.PCURVE_S1.); +#15215 = CIRCLE('',#15216,0.3); +#15216 = AXIS2_PLACEMENT_3D('',#15217,#15218,#15219); +#15217 = CARTESIAN_POINT('',(-2.25,-2.745,0.725)); +#15218 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#15219 = DIRECTION('',(-1.,-9.95799250103E-17,3.700743415417E-16)); +#15220 = PCURVE('',#11168,#15221); +#15221 = DEFINITIONAL_REPRESENTATION('',(#15222),#15226); +#15222 = CIRCLE('',#15223,0.3); +#15223 = AXIS2_PLACEMENT_2D('',#15224,#15225); +#15224 = CARTESIAN_POINT('',(0.192340342435,0.16578967201)); +#15225 = DIRECTION('',(3.700743415417E-16,-1.)); +#15226 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15227 = PCURVE('',#15228,#15233); +#15228 = CYLINDRICAL_SURFACE('',#15229,0.3); +#15229 = AXIS2_PLACEMENT_3D('',#15230,#15231,#15232); +#15230 = CARTESIAN_POINT('',(-2.25,-2.745,0.725)); +#15231 = DIRECTION('',(9.95799250103E-17,-1.,-0.)); +#15232 = DIRECTION('',(-1.,-9.95799250103E-17,3.700743415417E-16)); +#15233 = DEFINITIONAL_REPRESENTATION('',(#15234),#15238); +#15234 = LINE('',#15235,#15236); +#15235 = CARTESIAN_POINT('',(6.28318530718,0.)); +#15236 = VECTOR('',#15237,1.); +#15237 = DIRECTION('',(-1.,0.)); +#15238 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15239 = ORIENTED_EDGE('',*,*,#15240,.T.); +#15240 = EDGE_CURVE('',#15212,#11153,#15241,.T.); +#15241 = SURFACE_CURVE('',#15242,(#15246,#15253),.PCURVE_S1.); +#15242 = LINE('',#15243,#15244); +#15243 = CARTESIAN_POINT('',(-2.25,-2.745,1.025)); +#15244 = VECTOR('',#15245,1.); +#15245 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#15246 = PCURVE('',#11168,#15247); +#15247 = DEFINITIONAL_REPRESENTATION('',(#15248),#15252); +#15248 = LINE('',#15249,#15250); +#15249 = CARTESIAN_POINT('',(0.492340342435,0.16578967201)); +#15250 = VECTOR('',#15251,1.); +#15251 = DIRECTION('',(0.,1.)); +#15252 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15253 = PCURVE('',#13262,#15254); +#15254 = DEFINITIONAL_REPRESENTATION('',(#15255),#15259); +#15255 = LINE('',#15256,#15257); +#15256 = CARTESIAN_POINT('',(0.,0.)); +#15257 = VECTOR('',#15258,1.); +#15258 = DIRECTION('',(1.,0.)); +#15259 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15260 = ADVANCED_FACE('',(#15261),#11225,.T.); +#15261 = FACE_BOUND('',#15262,.T.); +#15262 = EDGE_LOOP('',(#15263,#15264,#15265,#15293,#15321,#15350,#15378, + #15406,#15434,#15467,#15495,#15524)); +#15263 = ORIENTED_EDGE('',*,*,#11209,.F.); +#15264 = ORIENTED_EDGE('',*,*,#11400,.T.); +#15265 = ORIENTED_EDGE('',*,*,#15266,.T.); +#15266 = EDGE_CURVE('',#11401,#15267,#15269,.T.); +#15267 = VERTEX_POINT('',#15268); +#15268 = CARTESIAN_POINT('',(-2.35,2.745,0.725)); +#15269 = SURFACE_CURVE('',#15270,(#15275,#15286),.PCURVE_S1.); +#15270 = CIRCLE('',#15271,0.1); +#15271 = AXIS2_PLACEMENT_3D('',#15272,#15273,#15274); +#15272 = CARTESIAN_POINT('',(-2.25,2.745,0.725)); +#15273 = DIRECTION('',(9.95799250103E-17,-1.,0.)); +#15274 = DIRECTION('',(-4.440892098501E-15,-4.422237021476E-31,1.)); +#15275 = PCURVE('',#11225,#15276); +#15276 = DEFINITIONAL_REPRESENTATION('',(#15277),#15285); +#15277 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#15278,#15279,#15280,#15281 + ,#15282,#15283,#15284),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#15278 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#15279 = CARTESIAN_POINT('',(0.292340342435,-7.415408746888E-03)); +#15280 = CARTESIAN_POINT('',(0.142340342435,7.918713163156E-02)); +#15281 = CARTESIAN_POINT('',(-7.659657565E-03,0.16578967201)); +#15282 = CARTESIAN_POINT('',(0.142340342435,0.252392212388)); +#15283 = CARTESIAN_POINT('',(0.292340342435,0.338994752767)); +#15284 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#15285 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15286 = PCURVE('',#11437,#15287); +#15287 = DEFINITIONAL_REPRESENTATION('',(#15288),#15292); +#15288 = LINE('',#15289,#15290); +#15289 = CARTESIAN_POINT('',(0.,-0.41)); +#15290 = VECTOR('',#15291,1.); +#15291 = DIRECTION('',(1.,0.)); +#15292 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15293 = ORIENTED_EDGE('',*,*,#15294,.T.); +#15294 = EDGE_CURVE('',#15267,#15295,#15297,.T.); +#15295 = VERTEX_POINT('',#15296); +#15296 = CARTESIAN_POINT('',(-2.35,2.745,0.3)); +#15297 = SURFACE_CURVE('',#15298,(#15302,#15309),.PCURVE_S1.); +#15298 = LINE('',#15299,#15300); +#15299 = CARTESIAN_POINT('',(-2.35,2.745,0.725)); +#15300 = VECTOR('',#15301,1.); +#15301 = DIRECTION('',(-1.044915787883E-15,-1.040526357994E-31,-1.)); +#15302 = PCURVE('',#11225,#15303); +#15303 = DEFINITIONAL_REPRESENTATION('',(#15304),#15308); +#15304 = LINE('',#15305,#15306); +#15305 = CARTESIAN_POINT('',(0.192340342435,6.578967201E-02)); +#15306 = VECTOR('',#15307,1.); +#15307 = DIRECTION('',(-1.,-1.044915787883E-15)); +#15308 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15309 = PCURVE('',#15310,#15315); +#15310 = PLANE('',#15311); +#15311 = AXIS2_PLACEMENT_3D('',#15312,#15313,#15314); +#15312 = CARTESIAN_POINT('',(-2.35,2.335,0.725)); +#15313 = DIRECTION('',(-1.,-9.95799250103E-17,1.044915787883E-15)); +#15314 = DIRECTION('',(-1.044915787883E-15,-1.040526357994E-31,-1.)); +#15315 = DEFINITIONAL_REPRESENTATION('',(#15316),#15320); +#15316 = LINE('',#15317,#15318); +#15317 = CARTESIAN_POINT('',(-4.266158067775E-32,-0.41)); +#15318 = VECTOR('',#15319,1.); +#15319 = DIRECTION('',(1.,0.)); +#15320 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15321 = ORIENTED_EDGE('',*,*,#15322,.T.); +#15322 = EDGE_CURVE('',#15295,#15323,#15325,.T.); +#15323 = VERTEX_POINT('',#15324); +#15324 = CARTESIAN_POINT('',(-2.65,2.745,5.551115123126E-17)); +#15325 = SURFACE_CURVE('',#15326,(#15331,#15338),.PCURVE_S1.); +#15326 = CIRCLE('',#15327,0.3); +#15327 = AXIS2_PLACEMENT_3D('',#15328,#15329,#15330); +#15328 = CARTESIAN_POINT('',(-2.65,2.745,0.3)); +#15329 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#15330 = DIRECTION('',(1.,9.95799250103E-17,3.515706244646E-15)); +#15331 = PCURVE('',#11225,#15332); +#15332 = DEFINITIONAL_REPRESENTATION('',(#15333),#15337); +#15333 = CIRCLE('',#15334,0.3); +#15334 = AXIS2_PLACEMENT_2D('',#15335,#15336); +#15335 = CARTESIAN_POINT('',(-0.232659657565,-0.23421032799)); +#15336 = DIRECTION('',(3.515706244646E-15,1.)); +#15337 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15338 = PCURVE('',#15339,#15344); +#15339 = CYLINDRICAL_SURFACE('',#15340,0.3); +#15340 = AXIS2_PLACEMENT_3D('',#15341,#15342,#15343); +#15341 = CARTESIAN_POINT('',(-2.65,2.335,0.3)); +#15342 = DIRECTION('',(9.95799250103E-17,-1.,-0.)); +#15343 = DIRECTION('',(1.,9.95799250103E-17,3.515706244646E-15)); +#15344 = DEFINITIONAL_REPRESENTATION('',(#15345),#15349); +#15345 = LINE('',#15346,#15347); +#15346 = CARTESIAN_POINT('',(6.28318530718,-0.41)); +#15347 = VECTOR('',#15348,1.); +#15348 = DIRECTION('',(-1.,0.)); +#15349 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15350 = ORIENTED_EDGE('',*,*,#15351,.T.); +#15351 = EDGE_CURVE('',#15323,#15352,#15354,.T.); +#15352 = VERTEX_POINT('',#15353); +#15353 = CARTESIAN_POINT('',(-3.,2.745,5.551115123126E-17)); +#15354 = SURFACE_CURVE('',#15355,(#15359,#15366),.PCURVE_S1.); +#15355 = LINE('',#15356,#15357); +#15356 = CARTESIAN_POINT('',(-2.65,2.745,5.551115123126E-17)); +#15357 = VECTOR('',#15358,1.); +#15358 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#15359 = PCURVE('',#11225,#15360); +#15360 = DEFINITIONAL_REPRESENTATION('',(#15361),#15365); +#15361 = LINE('',#15362,#15363); +#15362 = CARTESIAN_POINT('',(-0.532659657565,-0.23421032799)); +#15363 = VECTOR('',#15364,1.); +#15364 = DIRECTION('',(0.,-1.)); +#15365 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15366 = PCURVE('',#15367,#15372); +#15367 = PLANE('',#15368); +#15368 = AXIS2_PLACEMENT_3D('',#15369,#15370,#15371); +#15369 = CARTESIAN_POINT('',(-2.65,2.335,5.551115123126E-17)); +#15370 = DIRECTION('',(0.,0.,1.)); +#15371 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#15372 = DEFINITIONAL_REPRESENTATION('',(#15373),#15377); +#15373 = LINE('',#15374,#15375); +#15374 = CARTESIAN_POINT('',(-4.082776925422E-17,-0.41)); +#15375 = VECTOR('',#15376,1.); +#15376 = DIRECTION('',(1.,0.)); +#15377 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15378 = ORIENTED_EDGE('',*,*,#15379,.T.); +#15379 = EDGE_CURVE('',#15352,#15380,#15382,.T.); +#15380 = VERTEX_POINT('',#15381); +#15381 = CARTESIAN_POINT('',(-3.,2.745,0.2)); +#15382 = SURFACE_CURVE('',#15383,(#15387,#15394),.PCURVE_S1.); +#15383 = LINE('',#15384,#15385); +#15384 = CARTESIAN_POINT('',(-3.,2.745,5.551115123126E-17)); +#15385 = VECTOR('',#15386,1.); +#15386 = DIRECTION('',(0.,0.,1.)); +#15387 = PCURVE('',#11225,#15388); +#15388 = DEFINITIONAL_REPRESENTATION('',(#15389),#15393); +#15389 = LINE('',#15390,#15391); +#15390 = CARTESIAN_POINT('',(-0.532659657565,-0.58421032799)); +#15391 = VECTOR('',#15392,1.); +#15392 = DIRECTION('',(1.,0.)); +#15393 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15394 = PCURVE('',#15395,#15400); +#15395 = PLANE('',#15396); +#15396 = AXIS2_PLACEMENT_3D('',#15397,#15398,#15399); +#15397 = CARTESIAN_POINT('',(-3.,2.335,5.551115123126E-17)); +#15398 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#15399 = DIRECTION('',(0.,-0.,1.)); +#15400 = DEFINITIONAL_REPRESENTATION('',(#15401),#15405); +#15401 = LINE('',#15402,#15403); +#15402 = CARTESIAN_POINT('',(0.,-0.41)); +#15403 = VECTOR('',#15404,1.); +#15404 = DIRECTION('',(1.,0.)); +#15405 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15406 = ORIENTED_EDGE('',*,*,#15407,.T.); +#15407 = EDGE_CURVE('',#15380,#15408,#15410,.T.); +#15408 = VERTEX_POINT('',#15409); +#15409 = CARTESIAN_POINT('',(-2.65,2.745,0.2)); +#15410 = SURFACE_CURVE('',#15411,(#15415,#15422),.PCURVE_S1.); +#15411 = LINE('',#15412,#15413); +#15412 = CARTESIAN_POINT('',(-3.,2.745,0.2)); +#15413 = VECTOR('',#15414,1.); +#15414 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#15415 = PCURVE('',#11225,#15416); +#15416 = DEFINITIONAL_REPRESENTATION('',(#15417),#15421); +#15417 = LINE('',#15418,#15419); +#15418 = CARTESIAN_POINT('',(-0.332659657565,-0.58421032799)); +#15419 = VECTOR('',#15420,1.); +#15420 = DIRECTION('',(0.,1.)); +#15421 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15422 = PCURVE('',#15423,#15428); +#15423 = PLANE('',#15424); +#15424 = AXIS2_PLACEMENT_3D('',#15425,#15426,#15427); +#15425 = CARTESIAN_POINT('',(-3.,2.335,0.2)); +#15426 = DIRECTION('',(-0.,0.,-1.)); +#15427 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#15428 = DEFINITIONAL_REPRESENTATION('',(#15429),#15433); +#15429 = LINE('',#15430,#15431); +#15430 = CARTESIAN_POINT('',(4.082776925422E-17,-0.41)); +#15431 = VECTOR('',#15432,1.); +#15432 = DIRECTION('',(1.,0.)); +#15433 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15434 = ORIENTED_EDGE('',*,*,#15435,.T.); +#15435 = EDGE_CURVE('',#15408,#15436,#15438,.T.); +#15436 = VERTEX_POINT('',#15437); +#15437 = CARTESIAN_POINT('',(-2.55,2.745,0.3)); +#15438 = SURFACE_CURVE('',#15439,(#15444,#15455),.PCURVE_S1.); +#15439 = CIRCLE('',#15440,0.1); +#15440 = AXIS2_PLACEMENT_3D('',#15441,#15442,#15443); +#15441 = CARTESIAN_POINT('',(-2.65,2.745,0.3)); +#15442 = DIRECTION('',(9.95799250103E-17,-1.,-0.)); +#15443 = DIRECTION('',(-0.,0.,-1.)); +#15444 = PCURVE('',#11225,#15445); +#15445 = DEFINITIONAL_REPRESENTATION('',(#15446),#15454); +#15446 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#15447,#15448,#15449,#15450 + ,#15451,#15452,#15453),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#15447 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#15448 = CARTESIAN_POINT('',(-0.332659657565,-6.100524723311E-02)); +#15449 = CARTESIAN_POINT('',(-0.182659657565,-0.147607787612)); +#15450 = CARTESIAN_POINT('',(-3.2659657565E-02,-0.23421032799)); +#15451 = CARTESIAN_POINT('',(-0.182659657565,-0.320812868368)); +#15452 = CARTESIAN_POINT('',(-0.332659657565,-0.407415408747)); +#15453 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#15454 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15455 = PCURVE('',#15456,#15461); +#15456 = CYLINDRICAL_SURFACE('',#15457,0.1); +#15457 = AXIS2_PLACEMENT_3D('',#15458,#15459,#15460); +#15458 = CARTESIAN_POINT('',(-2.65,2.335,0.3)); +#15459 = DIRECTION('',(9.95799250103E-17,-1.,0.)); +#15460 = DIRECTION('',(0.,-0.,-1.)); +#15461 = DEFINITIONAL_REPRESENTATION('',(#15462),#15466); +#15462 = LINE('',#15463,#15464); +#15463 = CARTESIAN_POINT('',(0.,-0.41)); +#15464 = VECTOR('',#15465,1.); +#15465 = DIRECTION('',(1.,0.)); +#15466 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15467 = ORIENTED_EDGE('',*,*,#15468,.T.); +#15468 = EDGE_CURVE('',#15436,#15469,#15471,.T.); +#15469 = VERTEX_POINT('',#15470); +#15470 = CARTESIAN_POINT('',(-2.55,2.745,0.725)); +#15471 = SURFACE_CURVE('',#15472,(#15476,#15483),.PCURVE_S1.); +#15472 = LINE('',#15473,#15474); +#15473 = CARTESIAN_POINT('',(-2.55,2.745,0.3)); +#15474 = VECTOR('',#15475,1.); +#15475 = DIRECTION('',(0.,0.,1.)); +#15476 = PCURVE('',#11225,#15477); +#15477 = DEFINITIONAL_REPRESENTATION('',(#15478),#15482); +#15478 = LINE('',#15479,#15480); +#15479 = CARTESIAN_POINT('',(-0.232659657565,-0.13421032799)); +#15480 = VECTOR('',#15481,1.); +#15481 = DIRECTION('',(1.,0.)); +#15482 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15483 = PCURVE('',#15484,#15489); +#15484 = PLANE('',#15485); +#15485 = AXIS2_PLACEMENT_3D('',#15486,#15487,#15488); +#15486 = CARTESIAN_POINT('',(-2.55,2.335,0.3)); +#15487 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#15488 = DIRECTION('',(0.,-0.,1.)); +#15489 = DEFINITIONAL_REPRESENTATION('',(#15490),#15494); +#15490 = LINE('',#15491,#15492); +#15491 = CARTESIAN_POINT('',(0.,-0.41)); +#15492 = VECTOR('',#15493,1.); +#15493 = DIRECTION('',(1.,0.)); +#15494 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15495 = ORIENTED_EDGE('',*,*,#15496,.T.); +#15496 = EDGE_CURVE('',#15469,#15497,#15499,.T.); +#15497 = VERTEX_POINT('',#15498); +#15498 = CARTESIAN_POINT('',(-2.25,2.745,1.025)); +#15499 = SURFACE_CURVE('',#15500,(#15505,#15512),.PCURVE_S1.); +#15500 = CIRCLE('',#15501,0.3); +#15501 = AXIS2_PLACEMENT_3D('',#15502,#15503,#15504); +#15502 = CARTESIAN_POINT('',(-2.25,2.745,0.725)); +#15503 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#15504 = DIRECTION('',(-1.,-9.95799250103E-17,3.700743415417E-16)); +#15505 = PCURVE('',#11225,#15506); +#15506 = DEFINITIONAL_REPRESENTATION('',(#15507),#15511); +#15507 = CIRCLE('',#15508,0.3); +#15508 = AXIS2_PLACEMENT_2D('',#15509,#15510); +#15509 = CARTESIAN_POINT('',(0.192340342435,0.16578967201)); +#15510 = DIRECTION('',(3.700743415417E-16,-1.)); +#15511 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15512 = PCURVE('',#15513,#15518); +#15513 = CYLINDRICAL_SURFACE('',#15514,0.3); +#15514 = AXIS2_PLACEMENT_3D('',#15515,#15516,#15517); +#15515 = CARTESIAN_POINT('',(-2.25,2.335,0.725)); +#15516 = DIRECTION('',(9.95799250103E-17,-1.,-0.)); +#15517 = DIRECTION('',(-1.,-9.95799250103E-17,3.700743415417E-16)); +#15518 = DEFINITIONAL_REPRESENTATION('',(#15519),#15523); +#15519 = LINE('',#15520,#15521); +#15520 = CARTESIAN_POINT('',(6.28318530718,-0.41)); +#15521 = VECTOR('',#15522,1.); +#15522 = DIRECTION('',(-1.,0.)); +#15523 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15524 = ORIENTED_EDGE('',*,*,#15525,.T.); +#15525 = EDGE_CURVE('',#15497,#11210,#15526,.T.); +#15526 = SURFACE_CURVE('',#15527,(#15531,#15538),.PCURVE_S1.); +#15527 = LINE('',#15528,#15529); +#15528 = CARTESIAN_POINT('',(-2.25,2.745,1.025)); +#15529 = VECTOR('',#15530,1.); +#15530 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#15531 = PCURVE('',#11225,#15532); +#15532 = DEFINITIONAL_REPRESENTATION('',(#15533),#15537); +#15533 = LINE('',#15534,#15535); +#15534 = CARTESIAN_POINT('',(0.492340342435,0.16578967201)); +#15535 = VECTOR('',#15536,1.); +#15536 = DIRECTION('',(0.,1.)); +#15537 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15538 = PCURVE('',#13462,#15539); +#15539 = DEFINITIONAL_REPRESENTATION('',(#15540),#15544); +#15540 = LINE('',#15541,#15542); +#15541 = CARTESIAN_POINT('',(4.082776925422E-17,-0.41)); +#15542 = VECTOR('',#15543,1.); +#15543 = DIRECTION('',(1.,0.)); +#15544 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15545 = ADVANCED_FACE('',(#15546),#11275,.F.); +#15546 = FACE_BOUND('',#15547,.F.); +#15547 = EDGE_LOOP('',(#15548,#15568,#15569,#15589)); +#15548 = ORIENTED_EDGE('',*,*,#15549,.F.); +#15549 = EDGE_CURVE('',#11210,#13447,#15550,.T.); +#15550 = SURFACE_CURVE('',#15551,(#15555,#15561),.PCURVE_S1.); +#15551 = LINE('',#15552,#15553); +#15552 = CARTESIAN_POINT('',(-2.25,2.745,1.025)); +#15553 = VECTOR('',#15554,1.); +#15554 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#15555 = PCURVE('',#11275,#15556); +#15556 = DEFINITIONAL_REPRESENTATION('',(#15557),#15560); +#15557 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#15558,#15559),.UNSPECIFIED., + .F.,.F.,(2,2),(0.3,0.375),.PIECEWISE_BEZIER_KNOTS.); +#15558 = CARTESIAN_POINT('',(6.92,-5.079790098097E-16)); +#15559 = CARTESIAN_POINT('',(6.944879154079,1.)); +#15560 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15561 = PCURVE('',#13462,#15562); +#15562 = DEFINITIONAL_REPRESENTATION('',(#15563),#15567); +#15563 = LINE('',#15564,#15565); +#15564 = CARTESIAN_POINT('',(4.082776925422E-17,-0.41)); +#15565 = VECTOR('',#15566,1.); +#15566 = DIRECTION('',(1.,0.)); +#15567 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15568 = ORIENTED_EDGE('',*,*,#11261,.T.); +#15569 = ORIENTED_EDGE('',*,*,#15570,.T.); +#15570 = EDGE_CURVE('',#11239,#13475,#15571,.T.); +#15571 = SURFACE_CURVE('',#15572,(#15576,#15582),.PCURVE_S1.); +#15572 = LINE('',#15573,#15574); +#15573 = CARTESIAN_POINT('',(-2.25,3.605,1.025)); +#15574 = VECTOR('',#15575,1.); +#15575 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#15576 = PCURVE('',#11275,#15577); +#15577 = DEFINITIONAL_REPRESENTATION('',(#15578),#15581); +#15578 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#15579,#15580),.UNSPECIFIED., + .F.,.F.,(2,2),(0.3,0.375),.PIECEWISE_BEZIER_KNOTS.); +#15579 = CARTESIAN_POINT('',(7.78,9.121489402054E-16)); +#15580 = CARTESIAN_POINT('',(7.812673716012,1.)); +#15581 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15582 = PCURVE('',#13512,#15583); +#15583 = DEFINITIONAL_REPRESENTATION('',(#15584),#15588); +#15584 = LINE('',#15585,#15586); +#15585 = CARTESIAN_POINT('',(0.,0.)); +#15586 = VECTOR('',#15587,1.); +#15587 = DIRECTION('',(1.,0.)); +#15588 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15589 = ORIENTED_EDGE('',*,*,#13474,.F.); +#15590 = ADVANCED_FACE('',(#15591),#11356,.F.); +#15591 = FACE_BOUND('',#15592,.F.); +#15592 = EDGE_LOOP('',(#15593,#15594,#15622,#15643)); +#15593 = ORIENTED_EDGE('',*,*,#11342,.T.); +#15594 = ORIENTED_EDGE('',*,*,#15595,.T.); +#15595 = EDGE_CURVE('',#11315,#15596,#15598,.T.); +#15596 = VERTEX_POINT('',#15597); +#15597 = CARTESIAN_POINT('',(-2.35,-2.335,0.725)); +#15598 = SURFACE_CURVE('',#15599,(#15604,#15611),.PCURVE_S1.); +#15599 = CIRCLE('',#15600,0.1); +#15600 = AXIS2_PLACEMENT_3D('',#15601,#15602,#15603); +#15601 = CARTESIAN_POINT('',(-2.25,-2.335,0.725)); +#15602 = DIRECTION('',(9.95799250103E-17,-1.,0.)); +#15603 = DIRECTION('',(-4.440892098501E-15,-4.422237021476E-31,1.)); +#15604 = PCURVE('',#11356,#15605); +#15605 = DEFINITIONAL_REPRESENTATION('',(#15606),#15610); +#15606 = LINE('',#15607,#15608); +#15607 = CARTESIAN_POINT('',(0.,-0.41)); +#15608 = VECTOR('',#15609,1.); +#15609 = DIRECTION('',(1.,0.)); +#15610 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15611 = PCURVE('',#11330,#15612); +#15612 = DEFINITIONAL_REPRESENTATION('',(#15613),#15621); +#15613 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#15614,#15615,#15616,#15617 + ,#15618,#15619,#15620),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#15614 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#15615 = CARTESIAN_POINT('',(0.292340342435,-7.415408746888E-03)); +#15616 = CARTESIAN_POINT('',(0.142340342435,7.918713163156E-02)); +#15617 = CARTESIAN_POINT('',(-7.659657565E-03,0.16578967201)); +#15618 = CARTESIAN_POINT('',(0.142340342435,0.252392212388)); +#15619 = CARTESIAN_POINT('',(0.292340342435,0.338994752767)); +#15620 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#15621 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15622 = ORIENTED_EDGE('',*,*,#15623,.F.); +#15623 = EDGE_CURVE('',#14982,#15596,#15624,.T.); +#15624 = SURFACE_CURVE('',#15625,(#15629,#15636),.PCURVE_S1.); +#15625 = LINE('',#15626,#15627); +#15626 = CARTESIAN_POINT('',(-2.35,-2.745,0.725)); +#15627 = VECTOR('',#15628,1.); +#15628 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#15629 = PCURVE('',#11356,#15630); +#15630 = DEFINITIONAL_REPRESENTATION('',(#15631),#15635); +#15631 = LINE('',#15632,#15633); +#15632 = CARTESIAN_POINT('',(1.570796326795,0.)); +#15633 = VECTOR('',#15634,1.); +#15634 = DIRECTION('',(0.,-1.)); +#15635 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15636 = PCURVE('',#15025,#15637); +#15637 = DEFINITIONAL_REPRESENTATION('',(#15638),#15642); +#15638 = LINE('',#15639,#15640); +#15639 = CARTESIAN_POINT('',(-0.,0.)); +#15640 = VECTOR('',#15641,1.); +#15641 = DIRECTION('',(6.767833676919E-44,-1.)); +#15642 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15643 = ORIENTED_EDGE('',*,*,#14981,.F.); +#15644 = ADVANCED_FACE('',(#15645),#11330,.T.); +#15645 = FACE_BOUND('',#15646,.T.); +#15646 = EDGE_LOOP('',(#15647,#15648,#15649,#15650,#15673,#15697,#15720, + #15743,#15766,#15794,#15817,#15841)); +#15647 = ORIENTED_EDGE('',*,*,#11452,.F.); +#15648 = ORIENTED_EDGE('',*,*,#11314,.T.); +#15649 = ORIENTED_EDGE('',*,*,#15595,.T.); +#15650 = ORIENTED_EDGE('',*,*,#15651,.T.); +#15651 = EDGE_CURVE('',#15596,#15652,#15654,.T.); +#15652 = VERTEX_POINT('',#15653); +#15653 = CARTESIAN_POINT('',(-2.35,-2.335,0.3)); +#15654 = SURFACE_CURVE('',#15655,(#15659,#15666),.PCURVE_S1.); +#15655 = LINE('',#15656,#15657); +#15656 = CARTESIAN_POINT('',(-2.35,-2.335,0.725)); +#15657 = VECTOR('',#15658,1.); +#15658 = DIRECTION('',(-1.044915787883E-15,-1.040526357994E-31,-1.)); +#15659 = PCURVE('',#11330,#15660); +#15660 = DEFINITIONAL_REPRESENTATION('',(#15661),#15665); +#15661 = LINE('',#15662,#15663); +#15662 = CARTESIAN_POINT('',(0.192340342435,6.578967201E-02)); +#15663 = VECTOR('',#15664,1.); +#15664 = DIRECTION('',(-1.,-1.044915787883E-15)); +#15665 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15666 = PCURVE('',#15025,#15667); +#15667 = DEFINITIONAL_REPRESENTATION('',(#15668),#15672); +#15668 = LINE('',#15669,#15670); +#15669 = CARTESIAN_POINT('',(-4.266158067775E-32,-0.41)); +#15670 = VECTOR('',#15671,1.); +#15671 = DIRECTION('',(1.,0.)); +#15672 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15673 = ORIENTED_EDGE('',*,*,#15674,.T.); +#15674 = EDGE_CURVE('',#15652,#15675,#15677,.T.); +#15675 = VERTEX_POINT('',#15676); +#15676 = CARTESIAN_POINT('',(-2.65,-2.335,5.551115123126E-17)); +#15677 = SURFACE_CURVE('',#15678,(#15683,#15690),.PCURVE_S1.); +#15678 = CIRCLE('',#15679,0.3); +#15679 = AXIS2_PLACEMENT_3D('',#15680,#15681,#15682); +#15680 = CARTESIAN_POINT('',(-2.65,-2.335,0.3)); +#15681 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#15682 = DIRECTION('',(1.,9.95799250103E-17,3.515706244646E-15)); +#15683 = PCURVE('',#11330,#15684); +#15684 = DEFINITIONAL_REPRESENTATION('',(#15685),#15689); +#15685 = CIRCLE('',#15686,0.3); +#15686 = AXIS2_PLACEMENT_2D('',#15687,#15688); +#15687 = CARTESIAN_POINT('',(-0.232659657565,-0.23421032799)); +#15688 = DIRECTION('',(3.515706244646E-15,1.)); +#15689 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15690 = PCURVE('',#15054,#15691); +#15691 = DEFINITIONAL_REPRESENTATION('',(#15692),#15696); +#15692 = LINE('',#15693,#15694); +#15693 = CARTESIAN_POINT('',(6.28318530718,-0.41)); +#15694 = VECTOR('',#15695,1.); +#15695 = DIRECTION('',(-1.,0.)); +#15696 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15697 = ORIENTED_EDGE('',*,*,#15698,.T.); +#15698 = EDGE_CURVE('',#15675,#15699,#15701,.T.); +#15699 = VERTEX_POINT('',#15700); +#15700 = CARTESIAN_POINT('',(-3.,-2.335,5.551115123126E-17)); +#15701 = SURFACE_CURVE('',#15702,(#15706,#15713),.PCURVE_S1.); +#15702 = LINE('',#15703,#15704); +#15703 = CARTESIAN_POINT('',(-2.65,-2.335,5.551115123126E-17)); +#15704 = VECTOR('',#15705,1.); +#15705 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#15706 = PCURVE('',#11330,#15707); +#15707 = DEFINITIONAL_REPRESENTATION('',(#15708),#15712); +#15708 = LINE('',#15709,#15710); +#15709 = CARTESIAN_POINT('',(-0.532659657565,-0.23421032799)); +#15710 = VECTOR('',#15711,1.); +#15711 = DIRECTION('',(0.,-1.)); +#15712 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15713 = PCURVE('',#15082,#15714); +#15714 = DEFINITIONAL_REPRESENTATION('',(#15715),#15719); +#15715 = LINE('',#15716,#15717); +#15716 = CARTESIAN_POINT('',(-4.082776925422E-17,-0.41)); +#15717 = VECTOR('',#15718,1.); +#15718 = DIRECTION('',(1.,0.)); +#15719 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15720 = ORIENTED_EDGE('',*,*,#15721,.T.); +#15721 = EDGE_CURVE('',#15699,#15722,#15724,.T.); +#15722 = VERTEX_POINT('',#15723); +#15723 = CARTESIAN_POINT('',(-3.,-2.335,0.2)); +#15724 = SURFACE_CURVE('',#15725,(#15729,#15736),.PCURVE_S1.); +#15725 = LINE('',#15726,#15727); +#15726 = CARTESIAN_POINT('',(-3.,-2.335,5.551115123126E-17)); +#15727 = VECTOR('',#15728,1.); +#15728 = DIRECTION('',(0.,0.,1.)); +#15729 = PCURVE('',#11330,#15730); +#15730 = DEFINITIONAL_REPRESENTATION('',(#15731),#15735); +#15731 = LINE('',#15732,#15733); +#15732 = CARTESIAN_POINT('',(-0.532659657565,-0.58421032799)); +#15733 = VECTOR('',#15734,1.); +#15734 = DIRECTION('',(1.,0.)); +#15735 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15736 = PCURVE('',#15110,#15737); +#15737 = DEFINITIONAL_REPRESENTATION('',(#15738),#15742); +#15738 = LINE('',#15739,#15740); +#15739 = CARTESIAN_POINT('',(0.,-0.41)); +#15740 = VECTOR('',#15741,1.); +#15741 = DIRECTION('',(1.,0.)); +#15742 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15743 = ORIENTED_EDGE('',*,*,#15744,.T.); +#15744 = EDGE_CURVE('',#15722,#15745,#15747,.T.); +#15745 = VERTEX_POINT('',#15746); +#15746 = CARTESIAN_POINT('',(-2.65,-2.335,0.2)); +#15747 = SURFACE_CURVE('',#15748,(#15752,#15759),.PCURVE_S1.); +#15748 = LINE('',#15749,#15750); +#15749 = CARTESIAN_POINT('',(-3.,-2.335,0.2)); +#15750 = VECTOR('',#15751,1.); +#15751 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#15752 = PCURVE('',#11330,#15753); +#15753 = DEFINITIONAL_REPRESENTATION('',(#15754),#15758); +#15754 = LINE('',#15755,#15756); +#15755 = CARTESIAN_POINT('',(-0.332659657565,-0.58421032799)); +#15756 = VECTOR('',#15757,1.); +#15757 = DIRECTION('',(0.,1.)); +#15758 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15759 = PCURVE('',#15138,#15760); +#15760 = DEFINITIONAL_REPRESENTATION('',(#15761),#15765); +#15761 = LINE('',#15762,#15763); +#15762 = CARTESIAN_POINT('',(4.082776925422E-17,-0.41)); +#15763 = VECTOR('',#15764,1.); +#15764 = DIRECTION('',(1.,0.)); +#15765 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15766 = ORIENTED_EDGE('',*,*,#15767,.T.); +#15767 = EDGE_CURVE('',#15745,#15768,#15770,.T.); +#15768 = VERTEX_POINT('',#15769); +#15769 = CARTESIAN_POINT('',(-2.55,-2.335,0.3)); +#15770 = SURFACE_CURVE('',#15771,(#15776,#15787),.PCURVE_S1.); +#15771 = CIRCLE('',#15772,0.1); +#15772 = AXIS2_PLACEMENT_3D('',#15773,#15774,#15775); +#15773 = CARTESIAN_POINT('',(-2.65,-2.335,0.3)); +#15774 = DIRECTION('',(9.95799250103E-17,-1.,-0.)); +#15775 = DIRECTION('',(-0.,0.,-1.)); +#15776 = PCURVE('',#11330,#15777); +#15777 = DEFINITIONAL_REPRESENTATION('',(#15778),#15786); +#15778 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#15779,#15780,#15781,#15782 + ,#15783,#15784,#15785),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#15779 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#15780 = CARTESIAN_POINT('',(-0.332659657565,-6.100524723311E-02)); +#15781 = CARTESIAN_POINT('',(-0.182659657565,-0.147607787612)); +#15782 = CARTESIAN_POINT('',(-3.2659657565E-02,-0.23421032799)); +#15783 = CARTESIAN_POINT('',(-0.182659657565,-0.320812868368)); +#15784 = CARTESIAN_POINT('',(-0.332659657565,-0.407415408747)); +#15785 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#15786 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15787 = PCURVE('',#15171,#15788); +#15788 = DEFINITIONAL_REPRESENTATION('',(#15789),#15793); +#15789 = LINE('',#15790,#15791); +#15790 = CARTESIAN_POINT('',(0.,-0.41)); +#15791 = VECTOR('',#15792,1.); +#15792 = DIRECTION('',(1.,0.)); +#15793 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15794 = ORIENTED_EDGE('',*,*,#15795,.T.); +#15795 = EDGE_CURVE('',#15768,#15796,#15798,.T.); +#15796 = VERTEX_POINT('',#15797); +#15797 = CARTESIAN_POINT('',(-2.55,-2.335,0.725)); +#15798 = SURFACE_CURVE('',#15799,(#15803,#15810),.PCURVE_S1.); +#15799 = LINE('',#15800,#15801); +#15800 = CARTESIAN_POINT('',(-2.55,-2.335,0.3)); +#15801 = VECTOR('',#15802,1.); +#15802 = DIRECTION('',(0.,0.,1.)); +#15803 = PCURVE('',#11330,#15804); +#15804 = DEFINITIONAL_REPRESENTATION('',(#15805),#15809); +#15805 = LINE('',#15806,#15807); +#15806 = CARTESIAN_POINT('',(-0.232659657565,-0.13421032799)); +#15807 = VECTOR('',#15808,1.); +#15808 = DIRECTION('',(1.,0.)); +#15809 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15810 = PCURVE('',#15199,#15811); +#15811 = DEFINITIONAL_REPRESENTATION('',(#15812),#15816); +#15812 = LINE('',#15813,#15814); +#15813 = CARTESIAN_POINT('',(0.,-0.41)); +#15814 = VECTOR('',#15815,1.); +#15815 = DIRECTION('',(1.,0.)); +#15816 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15817 = ORIENTED_EDGE('',*,*,#15818,.T.); +#15818 = EDGE_CURVE('',#15796,#15819,#15821,.T.); +#15819 = VERTEX_POINT('',#15820); +#15820 = CARTESIAN_POINT('',(-2.25,-2.335,1.025)); +#15821 = SURFACE_CURVE('',#15822,(#15827,#15834),.PCURVE_S1.); +#15822 = CIRCLE('',#15823,0.3); +#15823 = AXIS2_PLACEMENT_3D('',#15824,#15825,#15826); +#15824 = CARTESIAN_POINT('',(-2.25,-2.335,0.725)); +#15825 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#15826 = DIRECTION('',(-1.,-9.95799250103E-17,3.700743415417E-16)); +#15827 = PCURVE('',#11330,#15828); +#15828 = DEFINITIONAL_REPRESENTATION('',(#15829),#15833); +#15829 = CIRCLE('',#15830,0.3); +#15830 = AXIS2_PLACEMENT_2D('',#15831,#15832); +#15831 = CARTESIAN_POINT('',(0.192340342435,0.16578967201)); +#15832 = DIRECTION('',(3.700743415417E-16,-1.)); +#15833 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15834 = PCURVE('',#15228,#15835); +#15835 = DEFINITIONAL_REPRESENTATION('',(#15836),#15840); +#15836 = LINE('',#15837,#15838); +#15837 = CARTESIAN_POINT('',(6.28318530718,-0.41)); +#15838 = VECTOR('',#15839,1.); +#15839 = DIRECTION('',(-1.,0.)); +#15840 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15841 = ORIENTED_EDGE('',*,*,#15842,.T.); +#15842 = EDGE_CURVE('',#15819,#11453,#15843,.T.); +#15843 = SURFACE_CURVE('',#15844,(#15848,#15855),.PCURVE_S1.); +#15844 = LINE('',#15845,#15846); +#15845 = CARTESIAN_POINT('',(-2.25,-2.335,1.025)); +#15846 = VECTOR('',#15847,1.); +#15847 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#15848 = PCURVE('',#11330,#15849); +#15849 = DEFINITIONAL_REPRESENTATION('',(#15850),#15854); +#15850 = LINE('',#15851,#15852); +#15851 = CARTESIAN_POINT('',(0.492340342435,0.16578967201)); +#15852 = VECTOR('',#15853,1.); +#15853 = DIRECTION('',(0.,1.)); +#15854 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15855 = PCURVE('',#13262,#15856); +#15856 = DEFINITIONAL_REPRESENTATION('',(#15857),#15861); +#15857 = LINE('',#15858,#15859); +#15858 = CARTESIAN_POINT('',(4.082776925422E-17,-0.41)); +#15859 = VECTOR('',#15860,1.); +#15860 = DIRECTION('',(1.,0.)); +#15861 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15862 = ADVANCED_FACE('',(#15863),#11387,.F.); +#15863 = FACE_BOUND('',#15864,.F.); +#15864 = EDGE_LOOP('',(#15865,#15866,#15867,#15895,#15918,#15942,#15965, + #15988,#16011,#16039,#16062,#16086)); +#15865 = ORIENTED_EDGE('',*,*,#11562,.F.); +#15866 = ORIENTED_EDGE('',*,*,#11371,.T.); +#15867 = ORIENTED_EDGE('',*,*,#15868,.T.); +#15868 = EDGE_CURVE('',#11372,#15869,#15871,.T.); +#15869 = VERTEX_POINT('',#15870); +#15870 = CARTESIAN_POINT('',(-2.35,2.335,0.725)); +#15871 = SURFACE_CURVE('',#15872,(#15877,#15888),.PCURVE_S1.); +#15872 = CIRCLE('',#15873,0.1); +#15873 = AXIS2_PLACEMENT_3D('',#15874,#15875,#15876); +#15874 = CARTESIAN_POINT('',(-2.25,2.335,0.725)); +#15875 = DIRECTION('',(9.95799250103E-17,-1.,0.)); +#15876 = DIRECTION('',(-4.440892098501E-15,-4.422237021476E-31,1.)); +#15877 = PCURVE('',#11387,#15878); +#15878 = DEFINITIONAL_REPRESENTATION('',(#15879),#15887); +#15879 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#15880,#15881,#15882,#15883 + ,#15884,#15885,#15886),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#15880 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#15881 = CARTESIAN_POINT('',(0.292340342435,-7.415408746888E-03)); +#15882 = CARTESIAN_POINT('',(0.142340342435,7.918713163156E-02)); +#15883 = CARTESIAN_POINT('',(-7.659657565E-03,0.16578967201)); +#15884 = CARTESIAN_POINT('',(0.142340342435,0.252392212388)); +#15885 = CARTESIAN_POINT('',(0.292340342435,0.338994752767)); +#15886 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#15887 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15888 = PCURVE('',#11437,#15889); +#15889 = DEFINITIONAL_REPRESENTATION('',(#15890),#15894); +#15890 = LINE('',#15891,#15892); +#15891 = CARTESIAN_POINT('',(0.,0.)); +#15892 = VECTOR('',#15893,1.); +#15893 = DIRECTION('',(1.,0.)); +#15894 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15895 = ORIENTED_EDGE('',*,*,#15896,.T.); +#15896 = EDGE_CURVE('',#15869,#15897,#15899,.T.); +#15897 = VERTEX_POINT('',#15898); +#15898 = CARTESIAN_POINT('',(-2.35,2.335,0.3)); +#15899 = SURFACE_CURVE('',#15900,(#15904,#15911),.PCURVE_S1.); +#15900 = LINE('',#15901,#15902); +#15901 = CARTESIAN_POINT('',(-2.35,2.335,0.725)); +#15902 = VECTOR('',#15903,1.); +#15903 = DIRECTION('',(-1.044915787883E-15,-1.040526357994E-31,-1.)); +#15904 = PCURVE('',#11387,#15905); +#15905 = DEFINITIONAL_REPRESENTATION('',(#15906),#15910); +#15906 = LINE('',#15907,#15908); +#15907 = CARTESIAN_POINT('',(0.192340342435,6.578967201E-02)); +#15908 = VECTOR('',#15909,1.); +#15909 = DIRECTION('',(-1.,-1.044915787883E-15)); +#15910 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15911 = PCURVE('',#15310,#15912); +#15912 = DEFINITIONAL_REPRESENTATION('',(#15913),#15917); +#15913 = LINE('',#15914,#15915); +#15914 = CARTESIAN_POINT('',(-0.,0.)); +#15915 = VECTOR('',#15916,1.); +#15916 = DIRECTION('',(1.,0.)); +#15917 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15918 = ORIENTED_EDGE('',*,*,#15919,.T.); +#15919 = EDGE_CURVE('',#15897,#15920,#15922,.T.); +#15920 = VERTEX_POINT('',#15921); +#15921 = CARTESIAN_POINT('',(-2.65,2.335,5.551115123126E-17)); +#15922 = SURFACE_CURVE('',#15923,(#15928,#15935),.PCURVE_S1.); +#15923 = CIRCLE('',#15924,0.3); +#15924 = AXIS2_PLACEMENT_3D('',#15925,#15926,#15927); +#15925 = CARTESIAN_POINT('',(-2.65,2.335,0.3)); +#15926 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#15927 = DIRECTION('',(1.,9.95799250103E-17,3.515706244646E-15)); +#15928 = PCURVE('',#11387,#15929); +#15929 = DEFINITIONAL_REPRESENTATION('',(#15930),#15934); +#15930 = CIRCLE('',#15931,0.3); +#15931 = AXIS2_PLACEMENT_2D('',#15932,#15933); +#15932 = CARTESIAN_POINT('',(-0.232659657565,-0.23421032799)); +#15933 = DIRECTION('',(3.515706244646E-15,1.)); +#15934 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15935 = PCURVE('',#15339,#15936); +#15936 = DEFINITIONAL_REPRESENTATION('',(#15937),#15941); +#15937 = LINE('',#15938,#15939); +#15938 = CARTESIAN_POINT('',(6.28318530718,0.)); +#15939 = VECTOR('',#15940,1.); +#15940 = DIRECTION('',(-1.,0.)); +#15941 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15942 = ORIENTED_EDGE('',*,*,#15943,.T.); +#15943 = EDGE_CURVE('',#15920,#15944,#15946,.T.); +#15944 = VERTEX_POINT('',#15945); +#15945 = CARTESIAN_POINT('',(-3.,2.335,5.551115123126E-17)); +#15946 = SURFACE_CURVE('',#15947,(#15951,#15958),.PCURVE_S1.); +#15947 = LINE('',#15948,#15949); +#15948 = CARTESIAN_POINT('',(-2.65,2.335,5.551115123126E-17)); +#15949 = VECTOR('',#15950,1.); +#15950 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#15951 = PCURVE('',#11387,#15952); +#15952 = DEFINITIONAL_REPRESENTATION('',(#15953),#15957); +#15953 = LINE('',#15954,#15955); +#15954 = CARTESIAN_POINT('',(-0.532659657565,-0.23421032799)); +#15955 = VECTOR('',#15956,1.); +#15956 = DIRECTION('',(0.,-1.)); +#15957 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15958 = PCURVE('',#15367,#15959); +#15959 = DEFINITIONAL_REPRESENTATION('',(#15960),#15964); +#15960 = LINE('',#15961,#15962); +#15961 = CARTESIAN_POINT('',(0.,0.)); +#15962 = VECTOR('',#15963,1.); +#15963 = DIRECTION('',(1.,0.)); +#15964 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15965 = ORIENTED_EDGE('',*,*,#15966,.T.); +#15966 = EDGE_CURVE('',#15944,#15967,#15969,.T.); +#15967 = VERTEX_POINT('',#15968); +#15968 = CARTESIAN_POINT('',(-3.,2.335,0.2)); +#15969 = SURFACE_CURVE('',#15970,(#15974,#15981),.PCURVE_S1.); +#15970 = LINE('',#15971,#15972); +#15971 = CARTESIAN_POINT('',(-3.,2.335,5.551115123126E-17)); +#15972 = VECTOR('',#15973,1.); +#15973 = DIRECTION('',(0.,0.,1.)); +#15974 = PCURVE('',#11387,#15975); +#15975 = DEFINITIONAL_REPRESENTATION('',(#15976),#15980); +#15976 = LINE('',#15977,#15978); +#15977 = CARTESIAN_POINT('',(-0.532659657565,-0.58421032799)); +#15978 = VECTOR('',#15979,1.); +#15979 = DIRECTION('',(1.,0.)); +#15980 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15981 = PCURVE('',#15395,#15982); +#15982 = DEFINITIONAL_REPRESENTATION('',(#15983),#15987); +#15983 = LINE('',#15984,#15985); +#15984 = CARTESIAN_POINT('',(0.,0.)); +#15985 = VECTOR('',#15986,1.); +#15986 = DIRECTION('',(1.,0.)); +#15987 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#15988 = ORIENTED_EDGE('',*,*,#15989,.T.); +#15989 = EDGE_CURVE('',#15967,#15990,#15992,.T.); +#15990 = VERTEX_POINT('',#15991); +#15991 = CARTESIAN_POINT('',(-2.65,2.335,0.2)); +#15992 = SURFACE_CURVE('',#15993,(#15997,#16004),.PCURVE_S1.); +#15993 = LINE('',#15994,#15995); +#15994 = CARTESIAN_POINT('',(-3.,2.335,0.2)); +#15995 = VECTOR('',#15996,1.); +#15996 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#15997 = PCURVE('',#11387,#15998); +#15998 = DEFINITIONAL_REPRESENTATION('',(#15999),#16003); +#15999 = LINE('',#16000,#16001); +#16000 = CARTESIAN_POINT('',(-0.332659657565,-0.58421032799)); +#16001 = VECTOR('',#16002,1.); +#16002 = DIRECTION('',(0.,1.)); +#16003 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16004 = PCURVE('',#15423,#16005); +#16005 = DEFINITIONAL_REPRESENTATION('',(#16006),#16010); +#16006 = LINE('',#16007,#16008); +#16007 = CARTESIAN_POINT('',(0.,0.)); +#16008 = VECTOR('',#16009,1.); +#16009 = DIRECTION('',(1.,0.)); +#16010 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16011 = ORIENTED_EDGE('',*,*,#16012,.T.); +#16012 = EDGE_CURVE('',#15990,#16013,#16015,.T.); +#16013 = VERTEX_POINT('',#16014); +#16014 = CARTESIAN_POINT('',(-2.55,2.335,0.3)); +#16015 = SURFACE_CURVE('',#16016,(#16021,#16032),.PCURVE_S1.); +#16016 = CIRCLE('',#16017,0.1); +#16017 = AXIS2_PLACEMENT_3D('',#16018,#16019,#16020); +#16018 = CARTESIAN_POINT('',(-2.65,2.335,0.3)); +#16019 = DIRECTION('',(9.95799250103E-17,-1.,-0.)); +#16020 = DIRECTION('',(-0.,0.,-1.)); +#16021 = PCURVE('',#11387,#16022); +#16022 = DEFINITIONAL_REPRESENTATION('',(#16023),#16031); +#16023 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#16024,#16025,#16026,#16027 + ,#16028,#16029,#16030),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#16024 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#16025 = CARTESIAN_POINT('',(-0.332659657565,-6.100524723311E-02)); +#16026 = CARTESIAN_POINT('',(-0.182659657565,-0.147607787612)); +#16027 = CARTESIAN_POINT('',(-3.2659657565E-02,-0.23421032799)); +#16028 = CARTESIAN_POINT('',(-0.182659657565,-0.320812868368)); +#16029 = CARTESIAN_POINT('',(-0.332659657565,-0.407415408747)); +#16030 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#16031 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16032 = PCURVE('',#15456,#16033); +#16033 = DEFINITIONAL_REPRESENTATION('',(#16034),#16038); +#16034 = LINE('',#16035,#16036); +#16035 = CARTESIAN_POINT('',(0.,0.)); +#16036 = VECTOR('',#16037,1.); +#16037 = DIRECTION('',(1.,0.)); +#16038 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16039 = ORIENTED_EDGE('',*,*,#16040,.T.); +#16040 = EDGE_CURVE('',#16013,#16041,#16043,.T.); +#16041 = VERTEX_POINT('',#16042); +#16042 = CARTESIAN_POINT('',(-2.55,2.335,0.725)); +#16043 = SURFACE_CURVE('',#16044,(#16048,#16055),.PCURVE_S1.); +#16044 = LINE('',#16045,#16046); +#16045 = CARTESIAN_POINT('',(-2.55,2.335,0.3)); +#16046 = VECTOR('',#16047,1.); +#16047 = DIRECTION('',(0.,0.,1.)); +#16048 = PCURVE('',#11387,#16049); +#16049 = DEFINITIONAL_REPRESENTATION('',(#16050),#16054); +#16050 = LINE('',#16051,#16052); +#16051 = CARTESIAN_POINT('',(-0.232659657565,-0.13421032799)); +#16052 = VECTOR('',#16053,1.); +#16053 = DIRECTION('',(1.,0.)); +#16054 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16055 = PCURVE('',#15484,#16056); +#16056 = DEFINITIONAL_REPRESENTATION('',(#16057),#16061); +#16057 = LINE('',#16058,#16059); +#16058 = CARTESIAN_POINT('',(0.,0.)); +#16059 = VECTOR('',#16060,1.); +#16060 = DIRECTION('',(1.,0.)); +#16061 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16062 = ORIENTED_EDGE('',*,*,#16063,.T.); +#16063 = EDGE_CURVE('',#16041,#16064,#16066,.T.); +#16064 = VERTEX_POINT('',#16065); +#16065 = CARTESIAN_POINT('',(-2.25,2.335,1.025)); +#16066 = SURFACE_CURVE('',#16067,(#16072,#16079),.PCURVE_S1.); +#16067 = CIRCLE('',#16068,0.3); +#16068 = AXIS2_PLACEMENT_3D('',#16069,#16070,#16071); +#16069 = CARTESIAN_POINT('',(-2.25,2.335,0.725)); +#16070 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#16071 = DIRECTION('',(-1.,-9.95799250103E-17,3.700743415417E-16)); +#16072 = PCURVE('',#11387,#16073); +#16073 = DEFINITIONAL_REPRESENTATION('',(#16074),#16078); +#16074 = CIRCLE('',#16075,0.3); +#16075 = AXIS2_PLACEMENT_2D('',#16076,#16077); +#16076 = CARTESIAN_POINT('',(0.192340342435,0.16578967201)); +#16077 = DIRECTION('',(3.700743415417E-16,-1.)); +#16078 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16079 = PCURVE('',#15513,#16080); +#16080 = DEFINITIONAL_REPRESENTATION('',(#16081),#16085); +#16081 = LINE('',#16082,#16083); +#16082 = CARTESIAN_POINT('',(6.28318530718,0.)); +#16083 = VECTOR('',#16084,1.); +#16084 = DIRECTION('',(-1.,0.)); +#16085 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16086 = ORIENTED_EDGE('',*,*,#16087,.T.); +#16087 = EDGE_CURVE('',#16064,#11563,#16088,.T.); +#16088 = SURFACE_CURVE('',#16089,(#16093,#16100),.PCURVE_S1.); +#16089 = LINE('',#16090,#16091); +#16090 = CARTESIAN_POINT('',(-2.25,2.335,1.025)); +#16091 = VECTOR('',#16092,1.); +#16092 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#16093 = PCURVE('',#11387,#16094); +#16094 = DEFINITIONAL_REPRESENTATION('',(#16095),#16099); +#16095 = LINE('',#16096,#16097); +#16096 = CARTESIAN_POINT('',(0.492340342435,0.16578967201)); +#16097 = VECTOR('',#16098,1.); +#16098 = DIRECTION('',(0.,1.)); +#16099 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16100 = PCURVE('',#13462,#16101); +#16101 = DEFINITIONAL_REPRESENTATION('',(#16102),#16106); +#16102 = LINE('',#16103,#16104); +#16103 = CARTESIAN_POINT('',(0.,0.)); +#16104 = VECTOR('',#16105,1.); +#16105 = DIRECTION('',(1.,0.)); +#16106 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16107 = ADVANCED_FACE('',(#16108),#11437,.F.); +#16108 = FACE_BOUND('',#16109,.F.); +#16109 = EDGE_LOOP('',(#16110,#16111,#16112,#16133)); +#16110 = ORIENTED_EDGE('',*,*,#11423,.T.); +#16111 = ORIENTED_EDGE('',*,*,#15266,.T.); +#16112 = ORIENTED_EDGE('',*,*,#16113,.F.); +#16113 = EDGE_CURVE('',#15869,#15267,#16114,.T.); +#16114 = SURFACE_CURVE('',#16115,(#16119,#16126),.PCURVE_S1.); +#16115 = LINE('',#16116,#16117); +#16116 = CARTESIAN_POINT('',(-2.35,2.335,0.725)); +#16117 = VECTOR('',#16118,1.); +#16118 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#16119 = PCURVE('',#11437,#16120); +#16120 = DEFINITIONAL_REPRESENTATION('',(#16121),#16125); +#16121 = LINE('',#16122,#16123); +#16122 = CARTESIAN_POINT('',(1.570796326795,0.)); +#16123 = VECTOR('',#16124,1.); +#16124 = DIRECTION('',(0.,-1.)); +#16125 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16126 = PCURVE('',#15310,#16127); +#16127 = DEFINITIONAL_REPRESENTATION('',(#16128),#16132); +#16128 = LINE('',#16129,#16130); +#16129 = CARTESIAN_POINT('',(-0.,0.)); +#16130 = VECTOR('',#16131,1.); +#16131 = DIRECTION('',(6.767833676919E-44,-1.)); +#16132 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16133 = ORIENTED_EDGE('',*,*,#15868,.F.); +#16134 = ADVANCED_FACE('',(#16135),#11518,.F.); +#16135 = FACE_BOUND('',#16136,.F.); +#16136 = EDGE_LOOP('',(#16137,#16157,#16158,#16178)); +#16137 = ORIENTED_EDGE('',*,*,#16138,.F.); +#16138 = EDGE_CURVE('',#11453,#13247,#16139,.T.); +#16139 = SURFACE_CURVE('',#16140,(#16144,#16150),.PCURVE_S1.); +#16140 = LINE('',#16141,#16142); +#16141 = CARTESIAN_POINT('',(-2.25,-2.335,1.025)); +#16142 = VECTOR('',#16143,1.); +#16143 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#16144 = PCURVE('',#11518,#16145); +#16145 = DEFINITIONAL_REPRESENTATION('',(#16146),#16149); +#16146 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#16147,#16148),.UNSPECIFIED., + .F.,.F.,(2,2),(0.3,0.375),.PIECEWISE_BEZIER_KNOTS.); +#16147 = CARTESIAN_POINT('',(1.84,1.957371763853E-16)); +#16148 = CARTESIAN_POINT('',(1.818836858006,1.)); +#16149 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16150 = PCURVE('',#13262,#16151); +#16151 = DEFINITIONAL_REPRESENTATION('',(#16152),#16156); +#16152 = LINE('',#16153,#16154); +#16153 = CARTESIAN_POINT('',(4.082776925422E-17,-0.41)); +#16154 = VECTOR('',#16155,1.); +#16155 = DIRECTION('',(1.,0.)); +#16156 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16157 = ORIENTED_EDGE('',*,*,#11504,.T.); +#16158 = ORIENTED_EDGE('',*,*,#16159,.T.); +#16159 = EDGE_CURVE('',#11477,#13275,#16160,.T.); +#16160 = SURFACE_CURVE('',#16161,(#16165,#16171),.PCURVE_S1.); +#16161 = LINE('',#16162,#16163); +#16162 = CARTESIAN_POINT('',(-2.25,-1.475,1.025)); +#16163 = VECTOR('',#16164,1.); +#16164 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#16165 = PCURVE('',#11518,#16166); +#16166 = DEFINITIONAL_REPRESENTATION('',(#16167),#16170); +#16167 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#16168,#16169),.UNSPECIFIED., + .F.,.F.,(2,2),(0.3,0.375),.PIECEWISE_BEZIER_KNOTS.); +#16168 = CARTESIAN_POINT('',(2.7,1.710706247948E-15)); +#16169 = CARTESIAN_POINT('',(2.68663141994,1.)); +#16170 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16171 = PCURVE('',#13312,#16172); +#16172 = DEFINITIONAL_REPRESENTATION('',(#16173),#16177); +#16173 = LINE('',#16174,#16175); +#16174 = CARTESIAN_POINT('',(0.,0.)); +#16175 = VECTOR('',#16176,1.); +#16176 = DIRECTION('',(1.,0.)); +#16177 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16178 = ORIENTED_EDGE('',*,*,#13274,.F.); +#16179 = ADVANCED_FACE('',(#16180),#11492,.F.); +#16180 = FACE_BOUND('',#16181,.F.); +#16181 = EDGE_LOOP('',(#16182,#16183,#16184,#16212,#16240,#16269,#16297, + #16325,#16353,#16386,#16414,#16443)); +#16182 = ORIENTED_EDGE('',*,*,#11476,.F.); +#16183 = ORIENTED_EDGE('',*,*,#11614,.T.); +#16184 = ORIENTED_EDGE('',*,*,#16185,.T.); +#16185 = EDGE_CURVE('',#11615,#16186,#16188,.T.); +#16186 = VERTEX_POINT('',#16187); +#16187 = CARTESIAN_POINT('',(-2.35,-1.475,0.725)); +#16188 = SURFACE_CURVE('',#16189,(#16194,#16205),.PCURVE_S1.); +#16189 = CIRCLE('',#16190,0.1); +#16190 = AXIS2_PLACEMENT_3D('',#16191,#16192,#16193); +#16191 = CARTESIAN_POINT('',(-2.25,-1.475,0.725)); +#16192 = DIRECTION('',(9.95799250103E-17,-1.,0.)); +#16193 = DIRECTION('',(-4.440892098501E-15,-4.422237021476E-31,1.)); +#16194 = PCURVE('',#11492,#16195); +#16195 = DEFINITIONAL_REPRESENTATION('',(#16196),#16204); +#16196 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#16197,#16198,#16199,#16200 + ,#16201,#16202,#16203),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#16197 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#16198 = CARTESIAN_POINT('',(0.292340342435,-7.415408746888E-03)); +#16199 = CARTESIAN_POINT('',(0.142340342435,7.918713163156E-02)); +#16200 = CARTESIAN_POINT('',(-7.659657565E-03,0.16578967201)); +#16201 = CARTESIAN_POINT('',(0.142340342435,0.252392212388)); +#16202 = CARTESIAN_POINT('',(0.292340342435,0.338994752767)); +#16203 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#16204 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16205 = PCURVE('',#11680,#16206); +#16206 = DEFINITIONAL_REPRESENTATION('',(#16207),#16211); +#16207 = LINE('',#16208,#16209); +#16208 = CARTESIAN_POINT('',(0.,0.)); +#16209 = VECTOR('',#16210,1.); +#16210 = DIRECTION('',(1.,0.)); +#16211 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16212 = ORIENTED_EDGE('',*,*,#16213,.T.); +#16213 = EDGE_CURVE('',#16186,#16214,#16216,.T.); +#16214 = VERTEX_POINT('',#16215); +#16215 = CARTESIAN_POINT('',(-2.35,-1.475,0.3)); +#16216 = SURFACE_CURVE('',#16217,(#16221,#16228),.PCURVE_S1.); +#16217 = LINE('',#16218,#16219); +#16218 = CARTESIAN_POINT('',(-2.35,-1.475,0.725)); +#16219 = VECTOR('',#16220,1.); +#16220 = DIRECTION('',(-1.044915787883E-15,-1.040526357994E-31,-1.)); +#16221 = PCURVE('',#11492,#16222); +#16222 = DEFINITIONAL_REPRESENTATION('',(#16223),#16227); +#16223 = LINE('',#16224,#16225); +#16224 = CARTESIAN_POINT('',(0.192340342435,6.578967201E-02)); +#16225 = VECTOR('',#16226,1.); +#16226 = DIRECTION('',(-1.,-1.044915787883E-15)); +#16227 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16228 = PCURVE('',#16229,#16234); +#16229 = PLANE('',#16230); +#16230 = AXIS2_PLACEMENT_3D('',#16231,#16232,#16233); +#16231 = CARTESIAN_POINT('',(-2.35,-1.475,0.725)); +#16232 = DIRECTION('',(-1.,-9.95799250103E-17,1.044915787883E-15)); +#16233 = DIRECTION('',(-1.044915787883E-15,-1.040526357994E-31,-1.)); +#16234 = DEFINITIONAL_REPRESENTATION('',(#16235),#16239); +#16235 = LINE('',#16236,#16237); +#16236 = CARTESIAN_POINT('',(-0.,0.)); +#16237 = VECTOR('',#16238,1.); +#16238 = DIRECTION('',(1.,0.)); +#16239 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16240 = ORIENTED_EDGE('',*,*,#16241,.T.); +#16241 = EDGE_CURVE('',#16214,#16242,#16244,.T.); +#16242 = VERTEX_POINT('',#16243); +#16243 = CARTESIAN_POINT('',(-2.65,-1.475,5.551115123126E-17)); +#16244 = SURFACE_CURVE('',#16245,(#16250,#16257),.PCURVE_S1.); +#16245 = CIRCLE('',#16246,0.3); +#16246 = AXIS2_PLACEMENT_3D('',#16247,#16248,#16249); +#16247 = CARTESIAN_POINT('',(-2.65,-1.475,0.3)); +#16248 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#16249 = DIRECTION('',(1.,9.95799250103E-17,3.515706244646E-15)); +#16250 = PCURVE('',#11492,#16251); +#16251 = DEFINITIONAL_REPRESENTATION('',(#16252),#16256); +#16252 = CIRCLE('',#16253,0.3); +#16253 = AXIS2_PLACEMENT_2D('',#16254,#16255); +#16254 = CARTESIAN_POINT('',(-0.232659657565,-0.23421032799)); +#16255 = DIRECTION('',(3.515706244646E-15,1.)); +#16256 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16257 = PCURVE('',#16258,#16263); +#16258 = CYLINDRICAL_SURFACE('',#16259,0.3); +#16259 = AXIS2_PLACEMENT_3D('',#16260,#16261,#16262); +#16260 = CARTESIAN_POINT('',(-2.65,-1.475,0.3)); +#16261 = DIRECTION('',(9.95799250103E-17,-1.,-0.)); +#16262 = DIRECTION('',(1.,9.95799250103E-17,3.515706244646E-15)); +#16263 = DEFINITIONAL_REPRESENTATION('',(#16264),#16268); +#16264 = LINE('',#16265,#16266); +#16265 = CARTESIAN_POINT('',(6.28318530718,0.)); +#16266 = VECTOR('',#16267,1.); +#16267 = DIRECTION('',(-1.,0.)); +#16268 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16269 = ORIENTED_EDGE('',*,*,#16270,.T.); +#16270 = EDGE_CURVE('',#16242,#16271,#16273,.T.); +#16271 = VERTEX_POINT('',#16272); +#16272 = CARTESIAN_POINT('',(-3.,-1.475,5.551115123126E-17)); +#16273 = SURFACE_CURVE('',#16274,(#16278,#16285),.PCURVE_S1.); +#16274 = LINE('',#16275,#16276); +#16275 = CARTESIAN_POINT('',(-2.65,-1.475,5.551115123126E-17)); +#16276 = VECTOR('',#16277,1.); +#16277 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#16278 = PCURVE('',#11492,#16279); +#16279 = DEFINITIONAL_REPRESENTATION('',(#16280),#16284); +#16280 = LINE('',#16281,#16282); +#16281 = CARTESIAN_POINT('',(-0.532659657565,-0.23421032799)); +#16282 = VECTOR('',#16283,1.); +#16283 = DIRECTION('',(0.,-1.)); +#16284 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16285 = PCURVE('',#16286,#16291); +#16286 = PLANE('',#16287); +#16287 = AXIS2_PLACEMENT_3D('',#16288,#16289,#16290); +#16288 = CARTESIAN_POINT('',(-2.65,-1.475,5.551115123126E-17)); +#16289 = DIRECTION('',(0.,0.,1.)); +#16290 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#16291 = DEFINITIONAL_REPRESENTATION('',(#16292),#16296); +#16292 = LINE('',#16293,#16294); +#16293 = CARTESIAN_POINT('',(0.,0.)); +#16294 = VECTOR('',#16295,1.); +#16295 = DIRECTION('',(1.,0.)); +#16296 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16297 = ORIENTED_EDGE('',*,*,#16298,.T.); +#16298 = EDGE_CURVE('',#16271,#16299,#16301,.T.); +#16299 = VERTEX_POINT('',#16300); +#16300 = CARTESIAN_POINT('',(-3.,-1.475,0.2)); +#16301 = SURFACE_CURVE('',#16302,(#16306,#16313),.PCURVE_S1.); +#16302 = LINE('',#16303,#16304); +#16303 = CARTESIAN_POINT('',(-3.,-1.475,5.551115123126E-17)); +#16304 = VECTOR('',#16305,1.); +#16305 = DIRECTION('',(0.,0.,1.)); +#16306 = PCURVE('',#11492,#16307); +#16307 = DEFINITIONAL_REPRESENTATION('',(#16308),#16312); +#16308 = LINE('',#16309,#16310); +#16309 = CARTESIAN_POINT('',(-0.532659657565,-0.58421032799)); +#16310 = VECTOR('',#16311,1.); +#16311 = DIRECTION('',(1.,0.)); +#16312 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16313 = PCURVE('',#16314,#16319); +#16314 = PLANE('',#16315); +#16315 = AXIS2_PLACEMENT_3D('',#16316,#16317,#16318); +#16316 = CARTESIAN_POINT('',(-3.,-1.475,5.551115123126E-17)); +#16317 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#16318 = DIRECTION('',(0.,-0.,1.)); +#16319 = DEFINITIONAL_REPRESENTATION('',(#16320),#16324); +#16320 = LINE('',#16321,#16322); +#16321 = CARTESIAN_POINT('',(0.,0.)); +#16322 = VECTOR('',#16323,1.); +#16323 = DIRECTION('',(1.,0.)); +#16324 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16325 = ORIENTED_EDGE('',*,*,#16326,.T.); +#16326 = EDGE_CURVE('',#16299,#16327,#16329,.T.); +#16327 = VERTEX_POINT('',#16328); +#16328 = CARTESIAN_POINT('',(-2.65,-1.475,0.2)); +#16329 = SURFACE_CURVE('',#16330,(#16334,#16341),.PCURVE_S1.); +#16330 = LINE('',#16331,#16332); +#16331 = CARTESIAN_POINT('',(-3.,-1.475,0.2)); +#16332 = VECTOR('',#16333,1.); +#16333 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#16334 = PCURVE('',#11492,#16335); +#16335 = DEFINITIONAL_REPRESENTATION('',(#16336),#16340); +#16336 = LINE('',#16337,#16338); +#16337 = CARTESIAN_POINT('',(-0.332659657565,-0.58421032799)); +#16338 = VECTOR('',#16339,1.); +#16339 = DIRECTION('',(0.,1.)); +#16340 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16341 = PCURVE('',#16342,#16347); +#16342 = PLANE('',#16343); +#16343 = AXIS2_PLACEMENT_3D('',#16344,#16345,#16346); +#16344 = CARTESIAN_POINT('',(-3.,-1.475,0.2)); +#16345 = DIRECTION('',(-0.,0.,-1.)); +#16346 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#16347 = DEFINITIONAL_REPRESENTATION('',(#16348),#16352); +#16348 = LINE('',#16349,#16350); +#16349 = CARTESIAN_POINT('',(0.,0.)); +#16350 = VECTOR('',#16351,1.); +#16351 = DIRECTION('',(1.,0.)); +#16352 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16353 = ORIENTED_EDGE('',*,*,#16354,.T.); +#16354 = EDGE_CURVE('',#16327,#16355,#16357,.T.); +#16355 = VERTEX_POINT('',#16356); +#16356 = CARTESIAN_POINT('',(-2.55,-1.475,0.3)); +#16357 = SURFACE_CURVE('',#16358,(#16363,#16374),.PCURVE_S1.); +#16358 = CIRCLE('',#16359,0.1); +#16359 = AXIS2_PLACEMENT_3D('',#16360,#16361,#16362); +#16360 = CARTESIAN_POINT('',(-2.65,-1.475,0.3)); +#16361 = DIRECTION('',(9.95799250103E-17,-1.,-0.)); +#16362 = DIRECTION('',(-0.,0.,-1.)); +#16363 = PCURVE('',#11492,#16364); +#16364 = DEFINITIONAL_REPRESENTATION('',(#16365),#16373); +#16365 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#16366,#16367,#16368,#16369 + ,#16370,#16371,#16372),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#16366 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#16367 = CARTESIAN_POINT('',(-0.332659657565,-6.100524723311E-02)); +#16368 = CARTESIAN_POINT('',(-0.182659657565,-0.147607787612)); +#16369 = CARTESIAN_POINT('',(-3.2659657565E-02,-0.23421032799)); +#16370 = CARTESIAN_POINT('',(-0.182659657565,-0.320812868368)); +#16371 = CARTESIAN_POINT('',(-0.332659657565,-0.407415408747)); +#16372 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#16373 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16374 = PCURVE('',#16375,#16380); +#16375 = CYLINDRICAL_SURFACE('',#16376,0.1); +#16376 = AXIS2_PLACEMENT_3D('',#16377,#16378,#16379); +#16377 = CARTESIAN_POINT('',(-2.65,-1.475,0.3)); +#16378 = DIRECTION('',(9.95799250103E-17,-1.,0.)); +#16379 = DIRECTION('',(0.,-0.,-1.)); +#16380 = DEFINITIONAL_REPRESENTATION('',(#16381),#16385); +#16381 = LINE('',#16382,#16383); +#16382 = CARTESIAN_POINT('',(0.,0.)); +#16383 = VECTOR('',#16384,1.); +#16384 = DIRECTION('',(1.,0.)); +#16385 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16386 = ORIENTED_EDGE('',*,*,#16387,.T.); +#16387 = EDGE_CURVE('',#16355,#16388,#16390,.T.); +#16388 = VERTEX_POINT('',#16389); +#16389 = CARTESIAN_POINT('',(-2.55,-1.475,0.725)); +#16390 = SURFACE_CURVE('',#16391,(#16395,#16402),.PCURVE_S1.); +#16391 = LINE('',#16392,#16393); +#16392 = CARTESIAN_POINT('',(-2.55,-1.475,0.3)); +#16393 = VECTOR('',#16394,1.); +#16394 = DIRECTION('',(0.,0.,1.)); +#16395 = PCURVE('',#11492,#16396); +#16396 = DEFINITIONAL_REPRESENTATION('',(#16397),#16401); +#16397 = LINE('',#16398,#16399); +#16398 = CARTESIAN_POINT('',(-0.232659657565,-0.13421032799)); +#16399 = VECTOR('',#16400,1.); +#16400 = DIRECTION('',(1.,0.)); +#16401 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16402 = PCURVE('',#16403,#16408); +#16403 = PLANE('',#16404); +#16404 = AXIS2_PLACEMENT_3D('',#16405,#16406,#16407); +#16405 = CARTESIAN_POINT('',(-2.55,-1.475,0.3)); +#16406 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#16407 = DIRECTION('',(0.,-0.,1.)); +#16408 = DEFINITIONAL_REPRESENTATION('',(#16409),#16413); +#16409 = LINE('',#16410,#16411); +#16410 = CARTESIAN_POINT('',(0.,0.)); +#16411 = VECTOR('',#16412,1.); +#16412 = DIRECTION('',(1.,0.)); +#16413 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16414 = ORIENTED_EDGE('',*,*,#16415,.T.); +#16415 = EDGE_CURVE('',#16388,#16416,#16418,.T.); +#16416 = VERTEX_POINT('',#16417); +#16417 = CARTESIAN_POINT('',(-2.25,-1.475,1.025)); +#16418 = SURFACE_CURVE('',#16419,(#16424,#16431),.PCURVE_S1.); +#16419 = CIRCLE('',#16420,0.3); +#16420 = AXIS2_PLACEMENT_3D('',#16421,#16422,#16423); +#16421 = CARTESIAN_POINT('',(-2.25,-1.475,0.725)); +#16422 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#16423 = DIRECTION('',(-1.,-9.95799250103E-17,3.700743415417E-16)); +#16424 = PCURVE('',#11492,#16425); +#16425 = DEFINITIONAL_REPRESENTATION('',(#16426),#16430); +#16426 = CIRCLE('',#16427,0.3); +#16427 = AXIS2_PLACEMENT_2D('',#16428,#16429); +#16428 = CARTESIAN_POINT('',(0.192340342435,0.16578967201)); +#16429 = DIRECTION('',(3.700743415417E-16,-1.)); +#16430 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16431 = PCURVE('',#16432,#16437); +#16432 = CYLINDRICAL_SURFACE('',#16433,0.3); +#16433 = AXIS2_PLACEMENT_3D('',#16434,#16435,#16436); +#16434 = CARTESIAN_POINT('',(-2.25,-1.475,0.725)); +#16435 = DIRECTION('',(9.95799250103E-17,-1.,-0.)); +#16436 = DIRECTION('',(-1.,-9.95799250103E-17,3.700743415417E-16)); +#16437 = DEFINITIONAL_REPRESENTATION('',(#16438),#16442); +#16438 = LINE('',#16439,#16440); +#16439 = CARTESIAN_POINT('',(6.28318530718,0.)); +#16440 = VECTOR('',#16441,1.); +#16441 = DIRECTION('',(-1.,0.)); +#16442 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16443 = ORIENTED_EDGE('',*,*,#16444,.T.); +#16444 = EDGE_CURVE('',#16416,#11477,#16445,.T.); +#16445 = SURFACE_CURVE('',#16446,(#16450,#16457),.PCURVE_S1.); +#16446 = LINE('',#16447,#16448); +#16447 = CARTESIAN_POINT('',(-2.25,-1.475,1.025)); +#16448 = VECTOR('',#16449,1.); +#16449 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#16450 = PCURVE('',#11492,#16451); +#16451 = DEFINITIONAL_REPRESENTATION('',(#16452),#16456); +#16452 = LINE('',#16453,#16454); +#16453 = CARTESIAN_POINT('',(0.492340342435,0.16578967201)); +#16454 = VECTOR('',#16455,1.); +#16455 = DIRECTION('',(0.,1.)); +#16456 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16457 = PCURVE('',#13312,#16458); +#16458 = DEFINITIONAL_REPRESENTATION('',(#16459),#16463); +#16459 = LINE('',#16460,#16461); +#16460 = CARTESIAN_POINT('',(0.,0.)); +#16461 = VECTOR('',#16462,1.); +#16462 = DIRECTION('',(1.,0.)); +#16463 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16464 = ADVANCED_FACE('',(#16465),#11549,.T.); +#16465 = FACE_BOUND('',#16466,.T.); +#16466 = EDGE_LOOP('',(#16467,#16468,#16469,#16497,#16525,#16554,#16582, + #16610,#16638,#16671,#16699,#16728)); +#16467 = ORIENTED_EDGE('',*,*,#11533,.F.); +#16468 = ORIENTED_EDGE('',*,*,#11724,.T.); +#16469 = ORIENTED_EDGE('',*,*,#16470,.T.); +#16470 = EDGE_CURVE('',#11725,#16471,#16473,.T.); +#16471 = VERTEX_POINT('',#16472); +#16472 = CARTESIAN_POINT('',(-2.35,1.475,0.725)); +#16473 = SURFACE_CURVE('',#16474,(#16479,#16490),.PCURVE_S1.); +#16474 = CIRCLE('',#16475,0.1); +#16475 = AXIS2_PLACEMENT_3D('',#16476,#16477,#16478); +#16476 = CARTESIAN_POINT('',(-2.25,1.475,0.725)); +#16477 = DIRECTION('',(9.95799250103E-17,-1.,0.)); +#16478 = DIRECTION('',(-4.440892098501E-15,-4.422237021476E-31,1.)); +#16479 = PCURVE('',#11549,#16480); +#16480 = DEFINITIONAL_REPRESENTATION('',(#16481),#16489); +#16481 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#16482,#16483,#16484,#16485 + ,#16486,#16487,#16488),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#16482 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#16483 = CARTESIAN_POINT('',(0.292340342435,-7.415408746888E-03)); +#16484 = CARTESIAN_POINT('',(0.142340342435,7.918713163156E-02)); +#16485 = CARTESIAN_POINT('',(-7.659657565E-03,0.16578967201)); +#16486 = CARTESIAN_POINT('',(0.142340342435,0.252392212388)); +#16487 = CARTESIAN_POINT('',(0.292340342435,0.338994752767)); +#16488 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#16489 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16490 = PCURVE('',#11761,#16491); +#16491 = DEFINITIONAL_REPRESENTATION('',(#16492),#16496); +#16492 = LINE('',#16493,#16494); +#16493 = CARTESIAN_POINT('',(0.,-0.41)); +#16494 = VECTOR('',#16495,1.); +#16495 = DIRECTION('',(1.,0.)); +#16496 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16497 = ORIENTED_EDGE('',*,*,#16498,.T.); +#16498 = EDGE_CURVE('',#16471,#16499,#16501,.T.); +#16499 = VERTEX_POINT('',#16500); +#16500 = CARTESIAN_POINT('',(-2.35,1.475,0.3)); +#16501 = SURFACE_CURVE('',#16502,(#16506,#16513),.PCURVE_S1.); +#16502 = LINE('',#16503,#16504); +#16503 = CARTESIAN_POINT('',(-2.35,1.475,0.725)); +#16504 = VECTOR('',#16505,1.); +#16505 = DIRECTION('',(-1.044915787883E-15,-1.040526357994E-31,-1.)); +#16506 = PCURVE('',#11549,#16507); +#16507 = DEFINITIONAL_REPRESENTATION('',(#16508),#16512); +#16508 = LINE('',#16509,#16510); +#16509 = CARTESIAN_POINT('',(0.192340342435,6.578967201E-02)); +#16510 = VECTOR('',#16511,1.); +#16511 = DIRECTION('',(-1.,-1.044915787883E-15)); +#16512 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16513 = PCURVE('',#16514,#16519); +#16514 = PLANE('',#16515); +#16515 = AXIS2_PLACEMENT_3D('',#16516,#16517,#16518); +#16516 = CARTESIAN_POINT('',(-2.35,1.065,0.725)); +#16517 = DIRECTION('',(-1.,-9.95799250103E-17,1.044915787883E-15)); +#16518 = DIRECTION('',(-1.044915787883E-15,-1.040526357994E-31,-1.)); +#16519 = DEFINITIONAL_REPRESENTATION('',(#16520),#16524); +#16520 = LINE('',#16521,#16522); +#16521 = CARTESIAN_POINT('',(-4.266158067775E-32,-0.41)); +#16522 = VECTOR('',#16523,1.); +#16523 = DIRECTION('',(1.,0.)); +#16524 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16525 = ORIENTED_EDGE('',*,*,#16526,.T.); +#16526 = EDGE_CURVE('',#16499,#16527,#16529,.T.); +#16527 = VERTEX_POINT('',#16528); +#16528 = CARTESIAN_POINT('',(-2.65,1.475,5.551115123126E-17)); +#16529 = SURFACE_CURVE('',#16530,(#16535,#16542),.PCURVE_S1.); +#16530 = CIRCLE('',#16531,0.3); +#16531 = AXIS2_PLACEMENT_3D('',#16532,#16533,#16534); +#16532 = CARTESIAN_POINT('',(-2.65,1.475,0.3)); +#16533 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#16534 = DIRECTION('',(1.,9.95799250103E-17,3.515706244646E-15)); +#16535 = PCURVE('',#11549,#16536); +#16536 = DEFINITIONAL_REPRESENTATION('',(#16537),#16541); +#16537 = CIRCLE('',#16538,0.3); +#16538 = AXIS2_PLACEMENT_2D('',#16539,#16540); +#16539 = CARTESIAN_POINT('',(-0.232659657565,-0.23421032799)); +#16540 = DIRECTION('',(3.515706244646E-15,1.)); +#16541 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16542 = PCURVE('',#16543,#16548); +#16543 = CYLINDRICAL_SURFACE('',#16544,0.3); +#16544 = AXIS2_PLACEMENT_3D('',#16545,#16546,#16547); +#16545 = CARTESIAN_POINT('',(-2.65,1.065,0.3)); +#16546 = DIRECTION('',(9.95799250103E-17,-1.,-0.)); +#16547 = DIRECTION('',(1.,9.95799250103E-17,3.515706244646E-15)); +#16548 = DEFINITIONAL_REPRESENTATION('',(#16549),#16553); +#16549 = LINE('',#16550,#16551); +#16550 = CARTESIAN_POINT('',(6.28318530718,-0.41)); +#16551 = VECTOR('',#16552,1.); +#16552 = DIRECTION('',(-1.,0.)); +#16553 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16554 = ORIENTED_EDGE('',*,*,#16555,.T.); +#16555 = EDGE_CURVE('',#16527,#16556,#16558,.T.); +#16556 = VERTEX_POINT('',#16557); +#16557 = CARTESIAN_POINT('',(-3.,1.475,5.551115123126E-17)); +#16558 = SURFACE_CURVE('',#16559,(#16563,#16570),.PCURVE_S1.); +#16559 = LINE('',#16560,#16561); +#16560 = CARTESIAN_POINT('',(-2.65,1.475,5.551115123126E-17)); +#16561 = VECTOR('',#16562,1.); +#16562 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#16563 = PCURVE('',#11549,#16564); +#16564 = DEFINITIONAL_REPRESENTATION('',(#16565),#16569); +#16565 = LINE('',#16566,#16567); +#16566 = CARTESIAN_POINT('',(-0.532659657565,-0.23421032799)); +#16567 = VECTOR('',#16568,1.); +#16568 = DIRECTION('',(0.,-1.)); +#16569 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16570 = PCURVE('',#16571,#16576); +#16571 = PLANE('',#16572); +#16572 = AXIS2_PLACEMENT_3D('',#16573,#16574,#16575); +#16573 = CARTESIAN_POINT('',(-2.65,1.065,5.551115123126E-17)); +#16574 = DIRECTION('',(0.,0.,1.)); +#16575 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#16576 = DEFINITIONAL_REPRESENTATION('',(#16577),#16581); +#16577 = LINE('',#16578,#16579); +#16578 = CARTESIAN_POINT('',(-4.082776925422E-17,-0.41)); +#16579 = VECTOR('',#16580,1.); +#16580 = DIRECTION('',(1.,0.)); +#16581 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16582 = ORIENTED_EDGE('',*,*,#16583,.T.); +#16583 = EDGE_CURVE('',#16556,#16584,#16586,.T.); +#16584 = VERTEX_POINT('',#16585); +#16585 = CARTESIAN_POINT('',(-3.,1.475,0.2)); +#16586 = SURFACE_CURVE('',#16587,(#16591,#16598),.PCURVE_S1.); +#16587 = LINE('',#16588,#16589); +#16588 = CARTESIAN_POINT('',(-3.,1.475,5.551115123126E-17)); +#16589 = VECTOR('',#16590,1.); +#16590 = DIRECTION('',(0.,0.,1.)); +#16591 = PCURVE('',#11549,#16592); +#16592 = DEFINITIONAL_REPRESENTATION('',(#16593),#16597); +#16593 = LINE('',#16594,#16595); +#16594 = CARTESIAN_POINT('',(-0.532659657565,-0.58421032799)); +#16595 = VECTOR('',#16596,1.); +#16596 = DIRECTION('',(1.,0.)); +#16597 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16598 = PCURVE('',#16599,#16604); +#16599 = PLANE('',#16600); +#16600 = AXIS2_PLACEMENT_3D('',#16601,#16602,#16603); +#16601 = CARTESIAN_POINT('',(-3.,1.065,5.551115123126E-17)); +#16602 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#16603 = DIRECTION('',(0.,-0.,1.)); +#16604 = DEFINITIONAL_REPRESENTATION('',(#16605),#16609); +#16605 = LINE('',#16606,#16607); +#16606 = CARTESIAN_POINT('',(0.,-0.41)); +#16607 = VECTOR('',#16608,1.); +#16608 = DIRECTION('',(1.,0.)); +#16609 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16610 = ORIENTED_EDGE('',*,*,#16611,.T.); +#16611 = EDGE_CURVE('',#16584,#16612,#16614,.T.); +#16612 = VERTEX_POINT('',#16613); +#16613 = CARTESIAN_POINT('',(-2.65,1.475,0.2)); +#16614 = SURFACE_CURVE('',#16615,(#16619,#16626),.PCURVE_S1.); +#16615 = LINE('',#16616,#16617); +#16616 = CARTESIAN_POINT('',(-3.,1.475,0.2)); +#16617 = VECTOR('',#16618,1.); +#16618 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#16619 = PCURVE('',#11549,#16620); +#16620 = DEFINITIONAL_REPRESENTATION('',(#16621),#16625); +#16621 = LINE('',#16622,#16623); +#16622 = CARTESIAN_POINT('',(-0.332659657565,-0.58421032799)); +#16623 = VECTOR('',#16624,1.); +#16624 = DIRECTION('',(0.,1.)); +#16625 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16626 = PCURVE('',#16627,#16632); +#16627 = PLANE('',#16628); +#16628 = AXIS2_PLACEMENT_3D('',#16629,#16630,#16631); +#16629 = CARTESIAN_POINT('',(-3.,1.065,0.2)); +#16630 = DIRECTION('',(-0.,0.,-1.)); +#16631 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#16632 = DEFINITIONAL_REPRESENTATION('',(#16633),#16637); +#16633 = LINE('',#16634,#16635); +#16634 = CARTESIAN_POINT('',(4.082776925422E-17,-0.41)); +#16635 = VECTOR('',#16636,1.); +#16636 = DIRECTION('',(1.,0.)); +#16637 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16638 = ORIENTED_EDGE('',*,*,#16639,.T.); +#16639 = EDGE_CURVE('',#16612,#16640,#16642,.T.); +#16640 = VERTEX_POINT('',#16641); +#16641 = CARTESIAN_POINT('',(-2.55,1.475,0.3)); +#16642 = SURFACE_CURVE('',#16643,(#16648,#16659),.PCURVE_S1.); +#16643 = CIRCLE('',#16644,0.1); +#16644 = AXIS2_PLACEMENT_3D('',#16645,#16646,#16647); +#16645 = CARTESIAN_POINT('',(-2.65,1.475,0.3)); +#16646 = DIRECTION('',(9.95799250103E-17,-1.,-0.)); +#16647 = DIRECTION('',(-0.,0.,-1.)); +#16648 = PCURVE('',#11549,#16649); +#16649 = DEFINITIONAL_REPRESENTATION('',(#16650),#16658); +#16650 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#16651,#16652,#16653,#16654 + ,#16655,#16656,#16657),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#16651 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#16652 = CARTESIAN_POINT('',(-0.332659657565,-6.100524723311E-02)); +#16653 = CARTESIAN_POINT('',(-0.182659657565,-0.147607787612)); +#16654 = CARTESIAN_POINT('',(-3.2659657565E-02,-0.23421032799)); +#16655 = CARTESIAN_POINT('',(-0.182659657565,-0.320812868368)); +#16656 = CARTESIAN_POINT('',(-0.332659657565,-0.407415408747)); +#16657 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#16658 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16659 = PCURVE('',#16660,#16665); +#16660 = CYLINDRICAL_SURFACE('',#16661,0.1); +#16661 = AXIS2_PLACEMENT_3D('',#16662,#16663,#16664); +#16662 = CARTESIAN_POINT('',(-2.65,1.065,0.3)); +#16663 = DIRECTION('',(9.95799250103E-17,-1.,0.)); +#16664 = DIRECTION('',(0.,-0.,-1.)); +#16665 = DEFINITIONAL_REPRESENTATION('',(#16666),#16670); +#16666 = LINE('',#16667,#16668); +#16667 = CARTESIAN_POINT('',(0.,-0.41)); +#16668 = VECTOR('',#16669,1.); +#16669 = DIRECTION('',(1.,0.)); +#16670 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16671 = ORIENTED_EDGE('',*,*,#16672,.T.); +#16672 = EDGE_CURVE('',#16640,#16673,#16675,.T.); +#16673 = VERTEX_POINT('',#16674); +#16674 = CARTESIAN_POINT('',(-2.55,1.475,0.725)); +#16675 = SURFACE_CURVE('',#16676,(#16680,#16687),.PCURVE_S1.); +#16676 = LINE('',#16677,#16678); +#16677 = CARTESIAN_POINT('',(-2.55,1.475,0.3)); +#16678 = VECTOR('',#16679,1.); +#16679 = DIRECTION('',(0.,0.,1.)); +#16680 = PCURVE('',#11549,#16681); +#16681 = DEFINITIONAL_REPRESENTATION('',(#16682),#16686); +#16682 = LINE('',#16683,#16684); +#16683 = CARTESIAN_POINT('',(-0.232659657565,-0.13421032799)); +#16684 = VECTOR('',#16685,1.); +#16685 = DIRECTION('',(1.,0.)); +#16686 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16687 = PCURVE('',#16688,#16693); +#16688 = PLANE('',#16689); +#16689 = AXIS2_PLACEMENT_3D('',#16690,#16691,#16692); +#16690 = CARTESIAN_POINT('',(-2.55,1.065,0.3)); +#16691 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#16692 = DIRECTION('',(0.,-0.,1.)); +#16693 = DEFINITIONAL_REPRESENTATION('',(#16694),#16698); +#16694 = LINE('',#16695,#16696); +#16695 = CARTESIAN_POINT('',(0.,-0.41)); +#16696 = VECTOR('',#16697,1.); +#16697 = DIRECTION('',(1.,0.)); +#16698 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16699 = ORIENTED_EDGE('',*,*,#16700,.T.); +#16700 = EDGE_CURVE('',#16673,#16701,#16703,.T.); +#16701 = VERTEX_POINT('',#16702); +#16702 = CARTESIAN_POINT('',(-2.25,1.475,1.025)); +#16703 = SURFACE_CURVE('',#16704,(#16709,#16716),.PCURVE_S1.); +#16704 = CIRCLE('',#16705,0.3); +#16705 = AXIS2_PLACEMENT_3D('',#16706,#16707,#16708); +#16706 = CARTESIAN_POINT('',(-2.25,1.475,0.725)); +#16707 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#16708 = DIRECTION('',(-1.,-9.95799250103E-17,3.700743415417E-16)); +#16709 = PCURVE('',#11549,#16710); +#16710 = DEFINITIONAL_REPRESENTATION('',(#16711),#16715); +#16711 = CIRCLE('',#16712,0.3); +#16712 = AXIS2_PLACEMENT_2D('',#16713,#16714); +#16713 = CARTESIAN_POINT('',(0.192340342435,0.16578967201)); +#16714 = DIRECTION('',(3.700743415417E-16,-1.)); +#16715 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16716 = PCURVE('',#16717,#16722); +#16717 = CYLINDRICAL_SURFACE('',#16718,0.3); +#16718 = AXIS2_PLACEMENT_3D('',#16719,#16720,#16721); +#16719 = CARTESIAN_POINT('',(-2.25,1.065,0.725)); +#16720 = DIRECTION('',(9.95799250103E-17,-1.,-0.)); +#16721 = DIRECTION('',(-1.,-9.95799250103E-17,3.700743415417E-16)); +#16722 = DEFINITIONAL_REPRESENTATION('',(#16723),#16727); +#16723 = LINE('',#16724,#16725); +#16724 = CARTESIAN_POINT('',(6.28318530718,-0.41)); +#16725 = VECTOR('',#16726,1.); +#16726 = DIRECTION('',(-1.,0.)); +#16727 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16728 = ORIENTED_EDGE('',*,*,#16729,.T.); +#16729 = EDGE_CURVE('',#16701,#11534,#16730,.T.); +#16730 = SURFACE_CURVE('',#16731,(#16735,#16742),.PCURVE_S1.); +#16731 = LINE('',#16732,#16733); +#16732 = CARTESIAN_POINT('',(-2.25,1.475,1.025)); +#16733 = VECTOR('',#16734,1.); +#16734 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#16735 = PCURVE('',#11549,#16736); +#16736 = DEFINITIONAL_REPRESENTATION('',(#16737),#16741); +#16737 = LINE('',#16738,#16739); +#16738 = CARTESIAN_POINT('',(0.492340342435,0.16578967201)); +#16739 = VECTOR('',#16740,1.); +#16740 = DIRECTION('',(0.,1.)); +#16741 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16742 = PCURVE('',#13412,#16743); +#16743 = DEFINITIONAL_REPRESENTATION('',(#16744),#16748); +#16744 = LINE('',#16745,#16746); +#16745 = CARTESIAN_POINT('',(4.082776925422E-17,-0.41)); +#16746 = VECTOR('',#16747,1.); +#16747 = DIRECTION('',(1.,0.)); +#16748 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16749 = ADVANCED_FACE('',(#16750),#11599,.F.); +#16750 = FACE_BOUND('',#16751,.F.); +#16751 = EDGE_LOOP('',(#16752,#16772,#16773,#16793)); +#16752 = ORIENTED_EDGE('',*,*,#16753,.F.); +#16753 = EDGE_CURVE('',#11534,#13397,#16754,.T.); +#16754 = SURFACE_CURVE('',#16755,(#16759,#16765),.PCURVE_S1.); +#16755 = LINE('',#16756,#16757); +#16756 = CARTESIAN_POINT('',(-2.25,1.475,1.025)); +#16757 = VECTOR('',#16758,1.); +#16758 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#16759 = PCURVE('',#11599,#16760); +#16760 = DEFINITIONAL_REPRESENTATION('',(#16761),#16764); +#16761 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#16762,#16763),.UNSPECIFIED., + .F.,.F.,(2,2),(0.3,0.375),.PIECEWISE_BEZIER_KNOTS.); +#16762 = CARTESIAN_POINT('',(5.65,1.712440990911E-15)); +#16763 = CARTESIAN_POINT('',(5.66336858006,1.)); +#16764 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16765 = PCURVE('',#13412,#16766); +#16766 = DEFINITIONAL_REPRESENTATION('',(#16767),#16771); +#16767 = LINE('',#16768,#16769); +#16768 = CARTESIAN_POINT('',(4.082776925422E-17,-0.41)); +#16769 = VECTOR('',#16770,1.); +#16770 = DIRECTION('',(1.,0.)); +#16771 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16772 = ORIENTED_EDGE('',*,*,#11585,.T.); +#16773 = ORIENTED_EDGE('',*,*,#16774,.T.); +#16774 = EDGE_CURVE('',#11563,#13425,#16775,.T.); +#16775 = SURFACE_CURVE('',#16776,(#16780,#16786),.PCURVE_S1.); +#16776 = LINE('',#16777,#16778); +#16777 = CARTESIAN_POINT('',(-2.25,2.335,1.025)); +#16778 = VECTOR('',#16779,1.); +#16779 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#16780 = PCURVE('',#11599,#16781); +#16781 = DEFINITIONAL_REPRESENTATION('',(#16782),#16785); +#16782 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#16783,#16784),.UNSPECIFIED., + .F.,.F.,(2,2),(0.3,0.375),.PIECEWISE_BEZIER_KNOTS.); +#16783 = CARTESIAN_POINT('',(6.51,1.986283945152E-16)); +#16784 = CARTESIAN_POINT('',(6.531163141994,1.)); +#16785 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16786 = PCURVE('',#13462,#16787); +#16787 = DEFINITIONAL_REPRESENTATION('',(#16788),#16792); +#16788 = LINE('',#16789,#16790); +#16789 = CARTESIAN_POINT('',(0.,0.)); +#16790 = VECTOR('',#16791,1.); +#16791 = DIRECTION('',(1.,0.)); +#16792 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16793 = ORIENTED_EDGE('',*,*,#13424,.F.); +#16794 = ADVANCED_FACE('',(#16795),#11680,.F.); +#16795 = FACE_BOUND('',#16796,.F.); +#16796 = EDGE_LOOP('',(#16797,#16798,#16826,#16847)); +#16797 = ORIENTED_EDGE('',*,*,#11666,.T.); +#16798 = ORIENTED_EDGE('',*,*,#16799,.T.); +#16799 = EDGE_CURVE('',#11639,#16800,#16802,.T.); +#16800 = VERTEX_POINT('',#16801); +#16801 = CARTESIAN_POINT('',(-2.35,-1.065,0.725)); +#16802 = SURFACE_CURVE('',#16803,(#16808,#16815),.PCURVE_S1.); +#16803 = CIRCLE('',#16804,0.1); +#16804 = AXIS2_PLACEMENT_3D('',#16805,#16806,#16807); +#16805 = CARTESIAN_POINT('',(-2.25,-1.065,0.725)); +#16806 = DIRECTION('',(9.95799250103E-17,-1.,0.)); +#16807 = DIRECTION('',(-4.440892098501E-15,-4.422237021476E-31,1.)); +#16808 = PCURVE('',#11680,#16809); +#16809 = DEFINITIONAL_REPRESENTATION('',(#16810),#16814); +#16810 = LINE('',#16811,#16812); +#16811 = CARTESIAN_POINT('',(0.,-0.41)); +#16812 = VECTOR('',#16813,1.); +#16813 = DIRECTION('',(1.,0.)); +#16814 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16815 = PCURVE('',#11654,#16816); +#16816 = DEFINITIONAL_REPRESENTATION('',(#16817),#16825); +#16817 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#16818,#16819,#16820,#16821 + ,#16822,#16823,#16824),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#16818 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#16819 = CARTESIAN_POINT('',(0.292340342435,-7.415408746888E-03)); +#16820 = CARTESIAN_POINT('',(0.142340342435,7.918713163156E-02)); +#16821 = CARTESIAN_POINT('',(-7.659657565E-03,0.16578967201)); +#16822 = CARTESIAN_POINT('',(0.142340342435,0.252392212388)); +#16823 = CARTESIAN_POINT('',(0.292340342435,0.338994752767)); +#16824 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#16825 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16826 = ORIENTED_EDGE('',*,*,#16827,.F.); +#16827 = EDGE_CURVE('',#16186,#16800,#16828,.T.); +#16828 = SURFACE_CURVE('',#16829,(#16833,#16840),.PCURVE_S1.); +#16829 = LINE('',#16830,#16831); +#16830 = CARTESIAN_POINT('',(-2.35,-1.475,0.725)); +#16831 = VECTOR('',#16832,1.); +#16832 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#16833 = PCURVE('',#11680,#16834); +#16834 = DEFINITIONAL_REPRESENTATION('',(#16835),#16839); +#16835 = LINE('',#16836,#16837); +#16836 = CARTESIAN_POINT('',(1.570796326795,0.)); +#16837 = VECTOR('',#16838,1.); +#16838 = DIRECTION('',(0.,-1.)); +#16839 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16840 = PCURVE('',#16229,#16841); +#16841 = DEFINITIONAL_REPRESENTATION('',(#16842),#16846); +#16842 = LINE('',#16843,#16844); +#16843 = CARTESIAN_POINT('',(-0.,0.)); +#16844 = VECTOR('',#16845,1.); +#16845 = DIRECTION('',(6.767833676919E-44,-1.)); +#16846 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16847 = ORIENTED_EDGE('',*,*,#16185,.F.); +#16848 = ADVANCED_FACE('',(#16849),#11654,.T.); +#16849 = FACE_BOUND('',#16850,.T.); +#16850 = EDGE_LOOP('',(#16851,#16852,#16853,#16854,#16877,#16901,#16924, + #16947,#16970,#16998,#17021,#17045)); +#16851 = ORIENTED_EDGE('',*,*,#11776,.F.); +#16852 = ORIENTED_EDGE('',*,*,#11638,.T.); +#16853 = ORIENTED_EDGE('',*,*,#16799,.T.); +#16854 = ORIENTED_EDGE('',*,*,#16855,.T.); +#16855 = EDGE_CURVE('',#16800,#16856,#16858,.T.); +#16856 = VERTEX_POINT('',#16857); +#16857 = CARTESIAN_POINT('',(-2.35,-1.065,0.3)); +#16858 = SURFACE_CURVE('',#16859,(#16863,#16870),.PCURVE_S1.); +#16859 = LINE('',#16860,#16861); +#16860 = CARTESIAN_POINT('',(-2.35,-1.065,0.725)); +#16861 = VECTOR('',#16862,1.); +#16862 = DIRECTION('',(-1.044915787883E-15,-1.040526357994E-31,-1.)); +#16863 = PCURVE('',#11654,#16864); +#16864 = DEFINITIONAL_REPRESENTATION('',(#16865),#16869); +#16865 = LINE('',#16866,#16867); +#16866 = CARTESIAN_POINT('',(0.192340342435,6.578967201E-02)); +#16867 = VECTOR('',#16868,1.); +#16868 = DIRECTION('',(-1.,-1.044915787883E-15)); +#16869 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16870 = PCURVE('',#16229,#16871); +#16871 = DEFINITIONAL_REPRESENTATION('',(#16872),#16876); +#16872 = LINE('',#16873,#16874); +#16873 = CARTESIAN_POINT('',(-4.266158067775E-32,-0.41)); +#16874 = VECTOR('',#16875,1.); +#16875 = DIRECTION('',(1.,0.)); +#16876 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16877 = ORIENTED_EDGE('',*,*,#16878,.T.); +#16878 = EDGE_CURVE('',#16856,#16879,#16881,.T.); +#16879 = VERTEX_POINT('',#16880); +#16880 = CARTESIAN_POINT('',(-2.65,-1.065,5.551115123126E-17)); +#16881 = SURFACE_CURVE('',#16882,(#16887,#16894),.PCURVE_S1.); +#16882 = CIRCLE('',#16883,0.3); +#16883 = AXIS2_PLACEMENT_3D('',#16884,#16885,#16886); +#16884 = CARTESIAN_POINT('',(-2.65,-1.065,0.3)); +#16885 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#16886 = DIRECTION('',(1.,9.95799250103E-17,3.515706244646E-15)); +#16887 = PCURVE('',#11654,#16888); +#16888 = DEFINITIONAL_REPRESENTATION('',(#16889),#16893); +#16889 = CIRCLE('',#16890,0.3); +#16890 = AXIS2_PLACEMENT_2D('',#16891,#16892); +#16891 = CARTESIAN_POINT('',(-0.232659657565,-0.23421032799)); +#16892 = DIRECTION('',(3.515706244646E-15,1.)); +#16893 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16894 = PCURVE('',#16258,#16895); +#16895 = DEFINITIONAL_REPRESENTATION('',(#16896),#16900); +#16896 = LINE('',#16897,#16898); +#16897 = CARTESIAN_POINT('',(6.28318530718,-0.41)); +#16898 = VECTOR('',#16899,1.); +#16899 = DIRECTION('',(-1.,0.)); +#16900 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16901 = ORIENTED_EDGE('',*,*,#16902,.T.); +#16902 = EDGE_CURVE('',#16879,#16903,#16905,.T.); +#16903 = VERTEX_POINT('',#16904); +#16904 = CARTESIAN_POINT('',(-3.,-1.065,5.551115123126E-17)); +#16905 = SURFACE_CURVE('',#16906,(#16910,#16917),.PCURVE_S1.); +#16906 = LINE('',#16907,#16908); +#16907 = CARTESIAN_POINT('',(-2.65,-1.065,5.551115123126E-17)); +#16908 = VECTOR('',#16909,1.); +#16909 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#16910 = PCURVE('',#11654,#16911); +#16911 = DEFINITIONAL_REPRESENTATION('',(#16912),#16916); +#16912 = LINE('',#16913,#16914); +#16913 = CARTESIAN_POINT('',(-0.532659657565,-0.23421032799)); +#16914 = VECTOR('',#16915,1.); +#16915 = DIRECTION('',(0.,-1.)); +#16916 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16917 = PCURVE('',#16286,#16918); +#16918 = DEFINITIONAL_REPRESENTATION('',(#16919),#16923); +#16919 = LINE('',#16920,#16921); +#16920 = CARTESIAN_POINT('',(-4.082776925422E-17,-0.41)); +#16921 = VECTOR('',#16922,1.); +#16922 = DIRECTION('',(1.,0.)); +#16923 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16924 = ORIENTED_EDGE('',*,*,#16925,.T.); +#16925 = EDGE_CURVE('',#16903,#16926,#16928,.T.); +#16926 = VERTEX_POINT('',#16927); +#16927 = CARTESIAN_POINT('',(-3.,-1.065,0.2)); +#16928 = SURFACE_CURVE('',#16929,(#16933,#16940),.PCURVE_S1.); +#16929 = LINE('',#16930,#16931); +#16930 = CARTESIAN_POINT('',(-3.,-1.065,5.551115123126E-17)); +#16931 = VECTOR('',#16932,1.); +#16932 = DIRECTION('',(0.,0.,1.)); +#16933 = PCURVE('',#11654,#16934); +#16934 = DEFINITIONAL_REPRESENTATION('',(#16935),#16939); +#16935 = LINE('',#16936,#16937); +#16936 = CARTESIAN_POINT('',(-0.532659657565,-0.58421032799)); +#16937 = VECTOR('',#16938,1.); +#16938 = DIRECTION('',(1.,0.)); +#16939 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16940 = PCURVE('',#16314,#16941); +#16941 = DEFINITIONAL_REPRESENTATION('',(#16942),#16946); +#16942 = LINE('',#16943,#16944); +#16943 = CARTESIAN_POINT('',(0.,-0.41)); +#16944 = VECTOR('',#16945,1.); +#16945 = DIRECTION('',(1.,0.)); +#16946 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16947 = ORIENTED_EDGE('',*,*,#16948,.T.); +#16948 = EDGE_CURVE('',#16926,#16949,#16951,.T.); +#16949 = VERTEX_POINT('',#16950); +#16950 = CARTESIAN_POINT('',(-2.65,-1.065,0.2)); +#16951 = SURFACE_CURVE('',#16952,(#16956,#16963),.PCURVE_S1.); +#16952 = LINE('',#16953,#16954); +#16953 = CARTESIAN_POINT('',(-3.,-1.065,0.2)); +#16954 = VECTOR('',#16955,1.); +#16955 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#16956 = PCURVE('',#11654,#16957); +#16957 = DEFINITIONAL_REPRESENTATION('',(#16958),#16962); +#16958 = LINE('',#16959,#16960); +#16959 = CARTESIAN_POINT('',(-0.332659657565,-0.58421032799)); +#16960 = VECTOR('',#16961,1.); +#16961 = DIRECTION('',(0.,1.)); +#16962 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16963 = PCURVE('',#16342,#16964); +#16964 = DEFINITIONAL_REPRESENTATION('',(#16965),#16969); +#16965 = LINE('',#16966,#16967); +#16966 = CARTESIAN_POINT('',(4.082776925422E-17,-0.41)); +#16967 = VECTOR('',#16968,1.); +#16968 = DIRECTION('',(1.,0.)); +#16969 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16970 = ORIENTED_EDGE('',*,*,#16971,.T.); +#16971 = EDGE_CURVE('',#16949,#16972,#16974,.T.); +#16972 = VERTEX_POINT('',#16973); +#16973 = CARTESIAN_POINT('',(-2.55,-1.065,0.3)); +#16974 = SURFACE_CURVE('',#16975,(#16980,#16991),.PCURVE_S1.); +#16975 = CIRCLE('',#16976,0.1); +#16976 = AXIS2_PLACEMENT_3D('',#16977,#16978,#16979); +#16977 = CARTESIAN_POINT('',(-2.65,-1.065,0.3)); +#16978 = DIRECTION('',(9.95799250103E-17,-1.,-0.)); +#16979 = DIRECTION('',(-0.,0.,-1.)); +#16980 = PCURVE('',#11654,#16981); +#16981 = DEFINITIONAL_REPRESENTATION('',(#16982),#16990); +#16982 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#16983,#16984,#16985,#16986 + ,#16987,#16988,#16989),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#16983 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#16984 = CARTESIAN_POINT('',(-0.332659657565,-6.100524723311E-02)); +#16985 = CARTESIAN_POINT('',(-0.182659657565,-0.147607787612)); +#16986 = CARTESIAN_POINT('',(-3.2659657565E-02,-0.23421032799)); +#16987 = CARTESIAN_POINT('',(-0.182659657565,-0.320812868368)); +#16988 = CARTESIAN_POINT('',(-0.332659657565,-0.407415408747)); +#16989 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#16990 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16991 = PCURVE('',#16375,#16992); +#16992 = DEFINITIONAL_REPRESENTATION('',(#16993),#16997); +#16993 = LINE('',#16994,#16995); +#16994 = CARTESIAN_POINT('',(0.,-0.41)); +#16995 = VECTOR('',#16996,1.); +#16996 = DIRECTION('',(1.,0.)); +#16997 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#16998 = ORIENTED_EDGE('',*,*,#16999,.T.); +#16999 = EDGE_CURVE('',#16972,#17000,#17002,.T.); +#17000 = VERTEX_POINT('',#17001); +#17001 = CARTESIAN_POINT('',(-2.55,-1.065,0.725)); +#17002 = SURFACE_CURVE('',#17003,(#17007,#17014),.PCURVE_S1.); +#17003 = LINE('',#17004,#17005); +#17004 = CARTESIAN_POINT('',(-2.55,-1.065,0.3)); +#17005 = VECTOR('',#17006,1.); +#17006 = DIRECTION('',(0.,0.,1.)); +#17007 = PCURVE('',#11654,#17008); +#17008 = DEFINITIONAL_REPRESENTATION('',(#17009),#17013); +#17009 = LINE('',#17010,#17011); +#17010 = CARTESIAN_POINT('',(-0.232659657565,-0.13421032799)); +#17011 = VECTOR('',#17012,1.); +#17012 = DIRECTION('',(1.,0.)); +#17013 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17014 = PCURVE('',#16403,#17015); +#17015 = DEFINITIONAL_REPRESENTATION('',(#17016),#17020); +#17016 = LINE('',#17017,#17018); +#17017 = CARTESIAN_POINT('',(0.,-0.41)); +#17018 = VECTOR('',#17019,1.); +#17019 = DIRECTION('',(1.,0.)); +#17020 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17021 = ORIENTED_EDGE('',*,*,#17022,.T.); +#17022 = EDGE_CURVE('',#17000,#17023,#17025,.T.); +#17023 = VERTEX_POINT('',#17024); +#17024 = CARTESIAN_POINT('',(-2.25,-1.065,1.025)); +#17025 = SURFACE_CURVE('',#17026,(#17031,#17038),.PCURVE_S1.); +#17026 = CIRCLE('',#17027,0.3); +#17027 = AXIS2_PLACEMENT_3D('',#17028,#17029,#17030); +#17028 = CARTESIAN_POINT('',(-2.25,-1.065,0.725)); +#17029 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#17030 = DIRECTION('',(-1.,-9.95799250103E-17,3.700743415417E-16)); +#17031 = PCURVE('',#11654,#17032); +#17032 = DEFINITIONAL_REPRESENTATION('',(#17033),#17037); +#17033 = CIRCLE('',#17034,0.3); +#17034 = AXIS2_PLACEMENT_2D('',#17035,#17036); +#17035 = CARTESIAN_POINT('',(0.192340342435,0.16578967201)); +#17036 = DIRECTION('',(3.700743415417E-16,-1.)); +#17037 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17038 = PCURVE('',#16432,#17039); +#17039 = DEFINITIONAL_REPRESENTATION('',(#17040),#17044); +#17040 = LINE('',#17041,#17042); +#17041 = CARTESIAN_POINT('',(6.28318530718,-0.41)); +#17042 = VECTOR('',#17043,1.); +#17043 = DIRECTION('',(-1.,0.)); +#17044 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17045 = ORIENTED_EDGE('',*,*,#17046,.T.); +#17046 = EDGE_CURVE('',#17023,#11777,#17047,.T.); +#17047 = SURFACE_CURVE('',#17048,(#17052,#17059),.PCURVE_S1.); +#17048 = LINE('',#17049,#17050); +#17049 = CARTESIAN_POINT('',(-2.25,-1.065,1.025)); +#17050 = VECTOR('',#17051,1.); +#17051 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#17052 = PCURVE('',#11654,#17053); +#17053 = DEFINITIONAL_REPRESENTATION('',(#17054),#17058); +#17054 = LINE('',#17055,#17056); +#17055 = CARTESIAN_POINT('',(0.492340342435,0.16578967201)); +#17056 = VECTOR('',#17057,1.); +#17057 = DIRECTION('',(0.,1.)); +#17058 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17059 = PCURVE('',#13312,#17060); +#17060 = DEFINITIONAL_REPRESENTATION('',(#17061),#17065); +#17061 = LINE('',#17062,#17063); +#17062 = CARTESIAN_POINT('',(4.082776925422E-17,-0.41)); +#17063 = VECTOR('',#17064,1.); +#17064 = DIRECTION('',(1.,0.)); +#17065 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17066 = ADVANCED_FACE('',(#17067),#11711,.F.); +#17067 = FACE_BOUND('',#17068,.F.); +#17068 = EDGE_LOOP('',(#17069,#17070,#17071,#17099,#17122,#17146,#17169, + #17192,#17215,#17243,#17266,#17290)); +#17069 = ORIENTED_EDGE('',*,*,#11886,.F.); +#17070 = ORIENTED_EDGE('',*,*,#11695,.T.); +#17071 = ORIENTED_EDGE('',*,*,#17072,.T.); +#17072 = EDGE_CURVE('',#11696,#17073,#17075,.T.); +#17073 = VERTEX_POINT('',#17074); +#17074 = CARTESIAN_POINT('',(-2.35,1.065,0.725)); +#17075 = SURFACE_CURVE('',#17076,(#17081,#17092),.PCURVE_S1.); +#17076 = CIRCLE('',#17077,0.1); +#17077 = AXIS2_PLACEMENT_3D('',#17078,#17079,#17080); +#17078 = CARTESIAN_POINT('',(-2.25,1.065,0.725)); +#17079 = DIRECTION('',(9.95799250103E-17,-1.,0.)); +#17080 = DIRECTION('',(-4.440892098501E-15,-4.422237021476E-31,1.)); +#17081 = PCURVE('',#11711,#17082); +#17082 = DEFINITIONAL_REPRESENTATION('',(#17083),#17091); +#17083 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#17084,#17085,#17086,#17087 + ,#17088,#17089,#17090),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#17084 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#17085 = CARTESIAN_POINT('',(0.292340342435,-7.415408746888E-03)); +#17086 = CARTESIAN_POINT('',(0.142340342435,7.918713163156E-02)); +#17087 = CARTESIAN_POINT('',(-7.659657565E-03,0.16578967201)); +#17088 = CARTESIAN_POINT('',(0.142340342435,0.252392212388)); +#17089 = CARTESIAN_POINT('',(0.292340342435,0.338994752767)); +#17090 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#17091 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17092 = PCURVE('',#11761,#17093); +#17093 = DEFINITIONAL_REPRESENTATION('',(#17094),#17098); +#17094 = LINE('',#17095,#17096); +#17095 = CARTESIAN_POINT('',(0.,0.)); +#17096 = VECTOR('',#17097,1.); +#17097 = DIRECTION('',(1.,0.)); +#17098 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17099 = ORIENTED_EDGE('',*,*,#17100,.T.); +#17100 = EDGE_CURVE('',#17073,#17101,#17103,.T.); +#17101 = VERTEX_POINT('',#17102); +#17102 = CARTESIAN_POINT('',(-2.35,1.065,0.3)); +#17103 = SURFACE_CURVE('',#17104,(#17108,#17115),.PCURVE_S1.); +#17104 = LINE('',#17105,#17106); +#17105 = CARTESIAN_POINT('',(-2.35,1.065,0.725)); +#17106 = VECTOR('',#17107,1.); +#17107 = DIRECTION('',(-1.044915787883E-15,-1.040526357994E-31,-1.)); +#17108 = PCURVE('',#11711,#17109); +#17109 = DEFINITIONAL_REPRESENTATION('',(#17110),#17114); +#17110 = LINE('',#17111,#17112); +#17111 = CARTESIAN_POINT('',(0.192340342435,6.578967201E-02)); +#17112 = VECTOR('',#17113,1.); +#17113 = DIRECTION('',(-1.,-1.044915787883E-15)); +#17114 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17115 = PCURVE('',#16514,#17116); +#17116 = DEFINITIONAL_REPRESENTATION('',(#17117),#17121); +#17117 = LINE('',#17118,#17119); +#17118 = CARTESIAN_POINT('',(-0.,0.)); +#17119 = VECTOR('',#17120,1.); +#17120 = DIRECTION('',(1.,0.)); +#17121 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17122 = ORIENTED_EDGE('',*,*,#17123,.T.); +#17123 = EDGE_CURVE('',#17101,#17124,#17126,.T.); +#17124 = VERTEX_POINT('',#17125); +#17125 = CARTESIAN_POINT('',(-2.65,1.065,5.551115123126E-17)); +#17126 = SURFACE_CURVE('',#17127,(#17132,#17139),.PCURVE_S1.); +#17127 = CIRCLE('',#17128,0.3); +#17128 = AXIS2_PLACEMENT_3D('',#17129,#17130,#17131); +#17129 = CARTESIAN_POINT('',(-2.65,1.065,0.3)); +#17130 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#17131 = DIRECTION('',(1.,9.95799250103E-17,3.515706244646E-15)); +#17132 = PCURVE('',#11711,#17133); +#17133 = DEFINITIONAL_REPRESENTATION('',(#17134),#17138); +#17134 = CIRCLE('',#17135,0.3); +#17135 = AXIS2_PLACEMENT_2D('',#17136,#17137); +#17136 = CARTESIAN_POINT('',(-0.232659657565,-0.23421032799)); +#17137 = DIRECTION('',(3.515706244646E-15,1.)); +#17138 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17139 = PCURVE('',#16543,#17140); +#17140 = DEFINITIONAL_REPRESENTATION('',(#17141),#17145); +#17141 = LINE('',#17142,#17143); +#17142 = CARTESIAN_POINT('',(6.28318530718,0.)); +#17143 = VECTOR('',#17144,1.); +#17144 = DIRECTION('',(-1.,0.)); +#17145 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17146 = ORIENTED_EDGE('',*,*,#17147,.T.); +#17147 = EDGE_CURVE('',#17124,#17148,#17150,.T.); +#17148 = VERTEX_POINT('',#17149); +#17149 = CARTESIAN_POINT('',(-3.,1.065,5.551115123126E-17)); +#17150 = SURFACE_CURVE('',#17151,(#17155,#17162),.PCURVE_S1.); +#17151 = LINE('',#17152,#17153); +#17152 = CARTESIAN_POINT('',(-2.65,1.065,5.551115123126E-17)); +#17153 = VECTOR('',#17154,1.); +#17154 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#17155 = PCURVE('',#11711,#17156); +#17156 = DEFINITIONAL_REPRESENTATION('',(#17157),#17161); +#17157 = LINE('',#17158,#17159); +#17158 = CARTESIAN_POINT('',(-0.532659657565,-0.23421032799)); +#17159 = VECTOR('',#17160,1.); +#17160 = DIRECTION('',(0.,-1.)); +#17161 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17162 = PCURVE('',#16571,#17163); +#17163 = DEFINITIONAL_REPRESENTATION('',(#17164),#17168); +#17164 = LINE('',#17165,#17166); +#17165 = CARTESIAN_POINT('',(0.,0.)); +#17166 = VECTOR('',#17167,1.); +#17167 = DIRECTION('',(1.,0.)); +#17168 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17169 = ORIENTED_EDGE('',*,*,#17170,.T.); +#17170 = EDGE_CURVE('',#17148,#17171,#17173,.T.); +#17171 = VERTEX_POINT('',#17172); +#17172 = CARTESIAN_POINT('',(-3.,1.065,0.2)); +#17173 = SURFACE_CURVE('',#17174,(#17178,#17185),.PCURVE_S1.); +#17174 = LINE('',#17175,#17176); +#17175 = CARTESIAN_POINT('',(-3.,1.065,5.551115123126E-17)); +#17176 = VECTOR('',#17177,1.); +#17177 = DIRECTION('',(0.,0.,1.)); +#17178 = PCURVE('',#11711,#17179); +#17179 = DEFINITIONAL_REPRESENTATION('',(#17180),#17184); +#17180 = LINE('',#17181,#17182); +#17181 = CARTESIAN_POINT('',(-0.532659657565,-0.58421032799)); +#17182 = VECTOR('',#17183,1.); +#17183 = DIRECTION('',(1.,0.)); +#17184 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17185 = PCURVE('',#16599,#17186); +#17186 = DEFINITIONAL_REPRESENTATION('',(#17187),#17191); +#17187 = LINE('',#17188,#17189); +#17188 = CARTESIAN_POINT('',(0.,0.)); +#17189 = VECTOR('',#17190,1.); +#17190 = DIRECTION('',(1.,0.)); +#17191 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17192 = ORIENTED_EDGE('',*,*,#17193,.T.); +#17193 = EDGE_CURVE('',#17171,#17194,#17196,.T.); +#17194 = VERTEX_POINT('',#17195); +#17195 = CARTESIAN_POINT('',(-2.65,1.065,0.2)); +#17196 = SURFACE_CURVE('',#17197,(#17201,#17208),.PCURVE_S1.); +#17197 = LINE('',#17198,#17199); +#17198 = CARTESIAN_POINT('',(-3.,1.065,0.2)); +#17199 = VECTOR('',#17200,1.); +#17200 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#17201 = PCURVE('',#11711,#17202); +#17202 = DEFINITIONAL_REPRESENTATION('',(#17203),#17207); +#17203 = LINE('',#17204,#17205); +#17204 = CARTESIAN_POINT('',(-0.332659657565,-0.58421032799)); +#17205 = VECTOR('',#17206,1.); +#17206 = DIRECTION('',(0.,1.)); +#17207 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17208 = PCURVE('',#16627,#17209); +#17209 = DEFINITIONAL_REPRESENTATION('',(#17210),#17214); +#17210 = LINE('',#17211,#17212); +#17211 = CARTESIAN_POINT('',(0.,0.)); +#17212 = VECTOR('',#17213,1.); +#17213 = DIRECTION('',(1.,0.)); +#17214 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17215 = ORIENTED_EDGE('',*,*,#17216,.T.); +#17216 = EDGE_CURVE('',#17194,#17217,#17219,.T.); +#17217 = VERTEX_POINT('',#17218); +#17218 = CARTESIAN_POINT('',(-2.55,1.065,0.3)); +#17219 = SURFACE_CURVE('',#17220,(#17225,#17236),.PCURVE_S1.); +#17220 = CIRCLE('',#17221,0.1); +#17221 = AXIS2_PLACEMENT_3D('',#17222,#17223,#17224); +#17222 = CARTESIAN_POINT('',(-2.65,1.065,0.3)); +#17223 = DIRECTION('',(9.95799250103E-17,-1.,-0.)); +#17224 = DIRECTION('',(-0.,0.,-1.)); +#17225 = PCURVE('',#11711,#17226); +#17226 = DEFINITIONAL_REPRESENTATION('',(#17227),#17235); +#17227 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#17228,#17229,#17230,#17231 + ,#17232,#17233,#17234),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#17228 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#17229 = CARTESIAN_POINT('',(-0.332659657565,-6.100524723311E-02)); +#17230 = CARTESIAN_POINT('',(-0.182659657565,-0.147607787612)); +#17231 = CARTESIAN_POINT('',(-3.2659657565E-02,-0.23421032799)); +#17232 = CARTESIAN_POINT('',(-0.182659657565,-0.320812868368)); +#17233 = CARTESIAN_POINT('',(-0.332659657565,-0.407415408747)); +#17234 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#17235 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17236 = PCURVE('',#16660,#17237); +#17237 = DEFINITIONAL_REPRESENTATION('',(#17238),#17242); +#17238 = LINE('',#17239,#17240); +#17239 = CARTESIAN_POINT('',(0.,0.)); +#17240 = VECTOR('',#17241,1.); +#17241 = DIRECTION('',(1.,0.)); +#17242 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17243 = ORIENTED_EDGE('',*,*,#17244,.T.); +#17244 = EDGE_CURVE('',#17217,#17245,#17247,.T.); +#17245 = VERTEX_POINT('',#17246); +#17246 = CARTESIAN_POINT('',(-2.55,1.065,0.725)); +#17247 = SURFACE_CURVE('',#17248,(#17252,#17259),.PCURVE_S1.); +#17248 = LINE('',#17249,#17250); +#17249 = CARTESIAN_POINT('',(-2.55,1.065,0.3)); +#17250 = VECTOR('',#17251,1.); +#17251 = DIRECTION('',(0.,0.,1.)); +#17252 = PCURVE('',#11711,#17253); +#17253 = DEFINITIONAL_REPRESENTATION('',(#17254),#17258); +#17254 = LINE('',#17255,#17256); +#17255 = CARTESIAN_POINT('',(-0.232659657565,-0.13421032799)); +#17256 = VECTOR('',#17257,1.); +#17257 = DIRECTION('',(1.,0.)); +#17258 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17259 = PCURVE('',#16688,#17260); +#17260 = DEFINITIONAL_REPRESENTATION('',(#17261),#17265); +#17261 = LINE('',#17262,#17263); +#17262 = CARTESIAN_POINT('',(0.,0.)); +#17263 = VECTOR('',#17264,1.); +#17264 = DIRECTION('',(1.,0.)); +#17265 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17266 = ORIENTED_EDGE('',*,*,#17267,.T.); +#17267 = EDGE_CURVE('',#17245,#17268,#17270,.T.); +#17268 = VERTEX_POINT('',#17269); +#17269 = CARTESIAN_POINT('',(-2.25,1.065,1.025)); +#17270 = SURFACE_CURVE('',#17271,(#17276,#17283),.PCURVE_S1.); +#17271 = CIRCLE('',#17272,0.3); +#17272 = AXIS2_PLACEMENT_3D('',#17273,#17274,#17275); +#17273 = CARTESIAN_POINT('',(-2.25,1.065,0.725)); +#17274 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#17275 = DIRECTION('',(-1.,-9.95799250103E-17,3.700743415417E-16)); +#17276 = PCURVE('',#11711,#17277); +#17277 = DEFINITIONAL_REPRESENTATION('',(#17278),#17282); +#17278 = CIRCLE('',#17279,0.3); +#17279 = AXIS2_PLACEMENT_2D('',#17280,#17281); +#17280 = CARTESIAN_POINT('',(0.192340342435,0.16578967201)); +#17281 = DIRECTION('',(3.700743415417E-16,-1.)); +#17282 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17283 = PCURVE('',#16717,#17284); +#17284 = DEFINITIONAL_REPRESENTATION('',(#17285),#17289); +#17285 = LINE('',#17286,#17287); +#17286 = CARTESIAN_POINT('',(6.28318530718,0.)); +#17287 = VECTOR('',#17288,1.); +#17288 = DIRECTION('',(-1.,0.)); +#17289 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17290 = ORIENTED_EDGE('',*,*,#17291,.T.); +#17291 = EDGE_CURVE('',#17268,#11887,#17292,.T.); +#17292 = SURFACE_CURVE('',#17293,(#17297,#17304),.PCURVE_S1.); +#17293 = LINE('',#17294,#17295); +#17294 = CARTESIAN_POINT('',(-2.25,1.065,1.025)); +#17295 = VECTOR('',#17296,1.); +#17296 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#17297 = PCURVE('',#11711,#17298); +#17298 = DEFINITIONAL_REPRESENTATION('',(#17299),#17303); +#17299 = LINE('',#17300,#17301); +#17300 = CARTESIAN_POINT('',(0.492340342435,0.16578967201)); +#17301 = VECTOR('',#17302,1.); +#17302 = DIRECTION('',(0.,1.)); +#17303 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17304 = PCURVE('',#13412,#17305); +#17305 = DEFINITIONAL_REPRESENTATION('',(#17306),#17310); +#17306 = LINE('',#17307,#17308); +#17307 = CARTESIAN_POINT('',(0.,0.)); +#17308 = VECTOR('',#17309,1.); +#17309 = DIRECTION('',(1.,0.)); +#17310 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17311 = ADVANCED_FACE('',(#17312),#11761,.F.); +#17312 = FACE_BOUND('',#17313,.F.); +#17313 = EDGE_LOOP('',(#17314,#17315,#17316,#17337)); +#17314 = ORIENTED_EDGE('',*,*,#11747,.T.); +#17315 = ORIENTED_EDGE('',*,*,#16470,.T.); +#17316 = ORIENTED_EDGE('',*,*,#17317,.F.); +#17317 = EDGE_CURVE('',#17073,#16471,#17318,.T.); +#17318 = SURFACE_CURVE('',#17319,(#17323,#17330),.PCURVE_S1.); +#17319 = LINE('',#17320,#17321); +#17320 = CARTESIAN_POINT('',(-2.35,1.065,0.725)); +#17321 = VECTOR('',#17322,1.); +#17322 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#17323 = PCURVE('',#11761,#17324); +#17324 = DEFINITIONAL_REPRESENTATION('',(#17325),#17329); +#17325 = LINE('',#17326,#17327); +#17326 = CARTESIAN_POINT('',(1.570796326795,0.)); +#17327 = VECTOR('',#17328,1.); +#17328 = DIRECTION('',(0.,-1.)); +#17329 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17330 = PCURVE('',#16514,#17331); +#17331 = DEFINITIONAL_REPRESENTATION('',(#17332),#17336); +#17332 = LINE('',#17333,#17334); +#17333 = CARTESIAN_POINT('',(-0.,0.)); +#17334 = VECTOR('',#17335,1.); +#17335 = DIRECTION('',(6.767833676919E-44,-1.)); +#17336 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17337 = ORIENTED_EDGE('',*,*,#17072,.F.); +#17338 = ADVANCED_FACE('',(#17339),#11842,.F.); +#17339 = FACE_BOUND('',#17340,.F.); +#17340 = EDGE_LOOP('',(#17341,#17361,#17362,#17382)); +#17341 = ORIENTED_EDGE('',*,*,#17342,.F.); +#17342 = EDGE_CURVE('',#11777,#13297,#17343,.T.); +#17343 = SURFACE_CURVE('',#17344,(#17348,#17354),.PCURVE_S1.); +#17344 = LINE('',#17345,#17346); +#17345 = CARTESIAN_POINT('',(-2.25,-1.065,1.025)); +#17346 = VECTOR('',#17347,1.); +#17347 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#17348 = PCURVE('',#11842,#17349); +#17349 = DEFINITIONAL_REPRESENTATION('',(#17350),#17353); +#17350 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#17351,#17352),.UNSPECIFIED., + .F.,.F.,(2,2),(0.3,0.375),.PIECEWISE_BEZIER_KNOTS.); +#17351 = CARTESIAN_POINT('',(3.11,2.164324594237E-15)); +#17352 = CARTESIAN_POINT('',(3.100347432024,1.)); +#17353 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17354 = PCURVE('',#13312,#17355); +#17355 = DEFINITIONAL_REPRESENTATION('',(#17356),#17360); +#17356 = LINE('',#17357,#17358); +#17357 = CARTESIAN_POINT('',(4.082776925422E-17,-0.41)); +#17358 = VECTOR('',#17359,1.); +#17359 = DIRECTION('',(1.,0.)); +#17360 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17361 = ORIENTED_EDGE('',*,*,#11828,.T.); +#17362 = ORIENTED_EDGE('',*,*,#17363,.T.); +#17363 = EDGE_CURVE('',#11801,#13325,#17364,.T.); +#17364 = SURFACE_CURVE('',#17365,(#17369,#17375),.PCURVE_S1.); +#17365 = LINE('',#17366,#17367); +#17366 = CARTESIAN_POINT('',(-2.25,-0.205,1.025)); +#17367 = VECTOR('',#17368,1.); +#17368 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#17369 = PCURVE('',#11842,#17370); +#17370 = DEFINITIONAL_REPRESENTATION('',(#17371),#17374); +#17371 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#17372,#17373),.UNSPECIFIED., + .F.,.F.,(2,2),(0.3,0.375),.PIECEWISE_BEZIER_KNOTS.); +#17372 = CARTESIAN_POINT('',(3.97,2.076706495586E-15)); +#17373 = CARTESIAN_POINT('',(3.968141993958,1.)); +#17374 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17375 = PCURVE('',#13362,#17376); +#17376 = DEFINITIONAL_REPRESENTATION('',(#17377),#17381); +#17377 = LINE('',#17378,#17379); +#17378 = CARTESIAN_POINT('',(0.,0.)); +#17379 = VECTOR('',#17380,1.); +#17380 = DIRECTION('',(1.,0.)); +#17381 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17382 = ORIENTED_EDGE('',*,*,#13324,.F.); +#17383 = ADVANCED_FACE('',(#17384),#11816,.F.); +#17384 = FACE_BOUND('',#17385,.F.); +#17385 = EDGE_LOOP('',(#17386,#17387,#17388,#17416,#17444,#17473,#17501, + #17529,#17557,#17590,#17618,#17647)); +#17386 = ORIENTED_EDGE('',*,*,#11800,.F.); +#17387 = ORIENTED_EDGE('',*,*,#11938,.T.); +#17388 = ORIENTED_EDGE('',*,*,#17389,.T.); +#17389 = EDGE_CURVE('',#11939,#17390,#17392,.T.); +#17390 = VERTEX_POINT('',#17391); +#17391 = CARTESIAN_POINT('',(-2.35,-0.205,0.725)); +#17392 = SURFACE_CURVE('',#17393,(#17398,#17409),.PCURVE_S1.); +#17393 = CIRCLE('',#17394,0.1); +#17394 = AXIS2_PLACEMENT_3D('',#17395,#17396,#17397); +#17395 = CARTESIAN_POINT('',(-2.25,-0.205,0.725)); +#17396 = DIRECTION('',(9.95799250103E-17,-1.,0.)); +#17397 = DIRECTION('',(-4.440892098501E-15,-4.422237021476E-31,1.)); +#17398 = PCURVE('',#11816,#17399); +#17399 = DEFINITIONAL_REPRESENTATION('',(#17400),#17408); +#17400 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#17401,#17402,#17403,#17404 + ,#17405,#17406,#17407),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#17401 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#17402 = CARTESIAN_POINT('',(0.292340342435,-7.415408746888E-03)); +#17403 = CARTESIAN_POINT('',(0.142340342435,7.918713163156E-02)); +#17404 = CARTESIAN_POINT('',(-7.659657565E-03,0.16578967201)); +#17405 = CARTESIAN_POINT('',(0.142340342435,0.252392212388)); +#17406 = CARTESIAN_POINT('',(0.292340342435,0.338994752767)); +#17407 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#17408 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17409 = PCURVE('',#11999,#17410); +#17410 = DEFINITIONAL_REPRESENTATION('',(#17411),#17415); +#17411 = LINE('',#17412,#17413); +#17412 = CARTESIAN_POINT('',(0.,0.)); +#17413 = VECTOR('',#17414,1.); +#17414 = DIRECTION('',(1.,0.)); +#17415 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17416 = ORIENTED_EDGE('',*,*,#17417,.T.); +#17417 = EDGE_CURVE('',#17390,#17418,#17420,.T.); +#17418 = VERTEX_POINT('',#17419); +#17419 = CARTESIAN_POINT('',(-2.35,-0.205,0.3)); +#17420 = SURFACE_CURVE('',#17421,(#17425,#17432),.PCURVE_S1.); +#17421 = LINE('',#17422,#17423); +#17422 = CARTESIAN_POINT('',(-2.35,-0.205,0.725)); +#17423 = VECTOR('',#17424,1.); +#17424 = DIRECTION('',(-1.044915787883E-15,-1.040526357994E-31,-1.)); +#17425 = PCURVE('',#11816,#17426); +#17426 = DEFINITIONAL_REPRESENTATION('',(#17427),#17431); +#17427 = LINE('',#17428,#17429); +#17428 = CARTESIAN_POINT('',(0.192340342435,6.578967201E-02)); +#17429 = VECTOR('',#17430,1.); +#17430 = DIRECTION('',(-1.,-1.044915787883E-15)); +#17431 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17432 = PCURVE('',#17433,#17438); +#17433 = PLANE('',#17434); +#17434 = AXIS2_PLACEMENT_3D('',#17435,#17436,#17437); +#17435 = CARTESIAN_POINT('',(-2.35,-0.205,0.725)); +#17436 = DIRECTION('',(-1.,-9.95799250103E-17,1.044915787883E-15)); +#17437 = DIRECTION('',(-1.044915787883E-15,-1.040526357994E-31,-1.)); +#17438 = DEFINITIONAL_REPRESENTATION('',(#17439),#17443); +#17439 = LINE('',#17440,#17441); +#17440 = CARTESIAN_POINT('',(-0.,0.)); +#17441 = VECTOR('',#17442,1.); +#17442 = DIRECTION('',(1.,0.)); +#17443 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17444 = ORIENTED_EDGE('',*,*,#17445,.T.); +#17445 = EDGE_CURVE('',#17418,#17446,#17448,.T.); +#17446 = VERTEX_POINT('',#17447); +#17447 = CARTESIAN_POINT('',(-2.65,-0.205,5.551115123126E-17)); +#17448 = SURFACE_CURVE('',#17449,(#17454,#17461),.PCURVE_S1.); +#17449 = CIRCLE('',#17450,0.3); +#17450 = AXIS2_PLACEMENT_3D('',#17451,#17452,#17453); +#17451 = CARTESIAN_POINT('',(-2.65,-0.205,0.3)); +#17452 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#17453 = DIRECTION('',(1.,9.95799250103E-17,3.515706244646E-15)); +#17454 = PCURVE('',#11816,#17455); +#17455 = DEFINITIONAL_REPRESENTATION('',(#17456),#17460); +#17456 = CIRCLE('',#17457,0.3); +#17457 = AXIS2_PLACEMENT_2D('',#17458,#17459); +#17458 = CARTESIAN_POINT('',(-0.232659657565,-0.23421032799)); +#17459 = DIRECTION('',(3.515706244646E-15,1.)); +#17460 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17461 = PCURVE('',#17462,#17467); +#17462 = CYLINDRICAL_SURFACE('',#17463,0.3); +#17463 = AXIS2_PLACEMENT_3D('',#17464,#17465,#17466); +#17464 = CARTESIAN_POINT('',(-2.65,-0.205,0.3)); +#17465 = DIRECTION('',(9.95799250103E-17,-1.,-0.)); +#17466 = DIRECTION('',(1.,9.95799250103E-17,3.515706244646E-15)); +#17467 = DEFINITIONAL_REPRESENTATION('',(#17468),#17472); +#17468 = LINE('',#17469,#17470); +#17469 = CARTESIAN_POINT('',(6.28318530718,2.775557561563E-17)); +#17470 = VECTOR('',#17471,1.); +#17471 = DIRECTION('',(-1.,-1.766974823035E-17)); +#17472 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17473 = ORIENTED_EDGE('',*,*,#17474,.T.); +#17474 = EDGE_CURVE('',#17446,#17475,#17477,.T.); +#17475 = VERTEX_POINT('',#17476); +#17476 = CARTESIAN_POINT('',(-3.,-0.205,5.551115123126E-17)); +#17477 = SURFACE_CURVE('',#17478,(#17482,#17489),.PCURVE_S1.); +#17478 = LINE('',#17479,#17480); +#17479 = CARTESIAN_POINT('',(-2.65,-0.205,5.551115123126E-17)); +#17480 = VECTOR('',#17481,1.); +#17481 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#17482 = PCURVE('',#11816,#17483); +#17483 = DEFINITIONAL_REPRESENTATION('',(#17484),#17488); +#17484 = LINE('',#17485,#17486); +#17485 = CARTESIAN_POINT('',(-0.532659657565,-0.23421032799)); +#17486 = VECTOR('',#17487,1.); +#17487 = DIRECTION('',(0.,-1.)); +#17488 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17489 = PCURVE('',#17490,#17495); +#17490 = PLANE('',#17491); +#17491 = AXIS2_PLACEMENT_3D('',#17492,#17493,#17494); +#17492 = CARTESIAN_POINT('',(-2.65,-0.205,5.551115123126E-17)); +#17493 = DIRECTION('',(0.,0.,1.)); +#17494 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#17495 = DEFINITIONAL_REPRESENTATION('',(#17496),#17500); +#17496 = LINE('',#17497,#17498); +#17497 = CARTESIAN_POINT('',(0.,0.)); +#17498 = VECTOR('',#17499,1.); +#17499 = DIRECTION('',(1.,0.)); +#17500 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17501 = ORIENTED_EDGE('',*,*,#17502,.T.); +#17502 = EDGE_CURVE('',#17475,#17503,#17505,.T.); +#17503 = VERTEX_POINT('',#17504); +#17504 = CARTESIAN_POINT('',(-3.,-0.205,0.2)); +#17505 = SURFACE_CURVE('',#17506,(#17510,#17517),.PCURVE_S1.); +#17506 = LINE('',#17507,#17508); +#17507 = CARTESIAN_POINT('',(-3.,-0.205,5.551115123126E-17)); +#17508 = VECTOR('',#17509,1.); +#17509 = DIRECTION('',(0.,0.,1.)); +#17510 = PCURVE('',#11816,#17511); +#17511 = DEFINITIONAL_REPRESENTATION('',(#17512),#17516); +#17512 = LINE('',#17513,#17514); +#17513 = CARTESIAN_POINT('',(-0.532659657565,-0.58421032799)); +#17514 = VECTOR('',#17515,1.); +#17515 = DIRECTION('',(1.,0.)); +#17516 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17517 = PCURVE('',#17518,#17523); +#17518 = PLANE('',#17519); +#17519 = AXIS2_PLACEMENT_3D('',#17520,#17521,#17522); +#17520 = CARTESIAN_POINT('',(-3.,-0.205,5.551115123126E-17)); +#17521 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#17522 = DIRECTION('',(0.,-0.,1.)); +#17523 = DEFINITIONAL_REPRESENTATION('',(#17524),#17528); +#17524 = LINE('',#17525,#17526); +#17525 = CARTESIAN_POINT('',(0.,0.)); +#17526 = VECTOR('',#17527,1.); +#17527 = DIRECTION('',(1.,0.)); +#17528 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17529 = ORIENTED_EDGE('',*,*,#17530,.T.); +#17530 = EDGE_CURVE('',#17503,#17531,#17533,.T.); +#17531 = VERTEX_POINT('',#17532); +#17532 = CARTESIAN_POINT('',(-2.65,-0.205,0.2)); +#17533 = SURFACE_CURVE('',#17534,(#17538,#17545),.PCURVE_S1.); +#17534 = LINE('',#17535,#17536); +#17535 = CARTESIAN_POINT('',(-3.,-0.205,0.2)); +#17536 = VECTOR('',#17537,1.); +#17537 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#17538 = PCURVE('',#11816,#17539); +#17539 = DEFINITIONAL_REPRESENTATION('',(#17540),#17544); +#17540 = LINE('',#17541,#17542); +#17541 = CARTESIAN_POINT('',(-0.332659657565,-0.58421032799)); +#17542 = VECTOR('',#17543,1.); +#17543 = DIRECTION('',(0.,1.)); +#17544 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17545 = PCURVE('',#17546,#17551); +#17546 = PLANE('',#17547); +#17547 = AXIS2_PLACEMENT_3D('',#17548,#17549,#17550); +#17548 = CARTESIAN_POINT('',(-3.,-0.205,0.2)); +#17549 = DIRECTION('',(-0.,0.,-1.)); +#17550 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#17551 = DEFINITIONAL_REPRESENTATION('',(#17552),#17556); +#17552 = LINE('',#17553,#17554); +#17553 = CARTESIAN_POINT('',(0.,0.)); +#17554 = VECTOR('',#17555,1.); +#17555 = DIRECTION('',(1.,0.)); +#17556 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17557 = ORIENTED_EDGE('',*,*,#17558,.T.); +#17558 = EDGE_CURVE('',#17531,#17559,#17561,.T.); +#17559 = VERTEX_POINT('',#17560); +#17560 = CARTESIAN_POINT('',(-2.55,-0.205,0.3)); +#17561 = SURFACE_CURVE('',#17562,(#17567,#17578),.PCURVE_S1.); +#17562 = CIRCLE('',#17563,0.1); +#17563 = AXIS2_PLACEMENT_3D('',#17564,#17565,#17566); +#17564 = CARTESIAN_POINT('',(-2.65,-0.205,0.3)); +#17565 = DIRECTION('',(9.95799250103E-17,-1.,-0.)); +#17566 = DIRECTION('',(-0.,0.,-1.)); +#17567 = PCURVE('',#11816,#17568); +#17568 = DEFINITIONAL_REPRESENTATION('',(#17569),#17577); +#17569 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#17570,#17571,#17572,#17573 + ,#17574,#17575,#17576),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#17570 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#17571 = CARTESIAN_POINT('',(-0.332659657565,-6.100524723311E-02)); +#17572 = CARTESIAN_POINT('',(-0.182659657565,-0.147607787612)); +#17573 = CARTESIAN_POINT('',(-3.2659657565E-02,-0.23421032799)); +#17574 = CARTESIAN_POINT('',(-0.182659657565,-0.320812868368)); +#17575 = CARTESIAN_POINT('',(-0.332659657565,-0.407415408747)); +#17576 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#17577 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17578 = PCURVE('',#17579,#17584); +#17579 = CYLINDRICAL_SURFACE('',#17580,0.1); +#17580 = AXIS2_PLACEMENT_3D('',#17581,#17582,#17583); +#17581 = CARTESIAN_POINT('',(-2.65,-0.205,0.3)); +#17582 = DIRECTION('',(9.95799250103E-17,-1.,0.)); +#17583 = DIRECTION('',(0.,-0.,-1.)); +#17584 = DEFINITIONAL_REPRESENTATION('',(#17585),#17589); +#17585 = LINE('',#17586,#17587); +#17586 = CARTESIAN_POINT('',(0.,0.)); +#17587 = VECTOR('',#17588,1.); +#17588 = DIRECTION('',(1.,1.766974823035E-17)); +#17589 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17590 = ORIENTED_EDGE('',*,*,#17591,.T.); +#17591 = EDGE_CURVE('',#17559,#17592,#17594,.T.); +#17592 = VERTEX_POINT('',#17593); +#17593 = CARTESIAN_POINT('',(-2.55,-0.205,0.725)); +#17594 = SURFACE_CURVE('',#17595,(#17599,#17606),.PCURVE_S1.); +#17595 = LINE('',#17596,#17597); +#17596 = CARTESIAN_POINT('',(-2.55,-0.205,0.3)); +#17597 = VECTOR('',#17598,1.); +#17598 = DIRECTION('',(0.,0.,1.)); +#17599 = PCURVE('',#11816,#17600); +#17600 = DEFINITIONAL_REPRESENTATION('',(#17601),#17605); +#17601 = LINE('',#17602,#17603); +#17602 = CARTESIAN_POINT('',(-0.232659657565,-0.13421032799)); +#17603 = VECTOR('',#17604,1.); +#17604 = DIRECTION('',(1.,0.)); +#17605 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17606 = PCURVE('',#17607,#17612); +#17607 = PLANE('',#17608); +#17608 = AXIS2_PLACEMENT_3D('',#17609,#17610,#17611); +#17609 = CARTESIAN_POINT('',(-2.55,-0.205,0.3)); +#17610 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#17611 = DIRECTION('',(0.,-0.,1.)); +#17612 = DEFINITIONAL_REPRESENTATION('',(#17613),#17617); +#17613 = LINE('',#17614,#17615); +#17614 = CARTESIAN_POINT('',(0.,0.)); +#17615 = VECTOR('',#17616,1.); +#17616 = DIRECTION('',(1.,0.)); +#17617 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17618 = ORIENTED_EDGE('',*,*,#17619,.T.); +#17619 = EDGE_CURVE('',#17592,#17620,#17622,.T.); +#17620 = VERTEX_POINT('',#17621); +#17621 = CARTESIAN_POINT('',(-2.25,-0.205,1.025)); +#17622 = SURFACE_CURVE('',#17623,(#17628,#17635),.PCURVE_S1.); +#17623 = CIRCLE('',#17624,0.3); +#17624 = AXIS2_PLACEMENT_3D('',#17625,#17626,#17627); +#17625 = CARTESIAN_POINT('',(-2.25,-0.205,0.725)); +#17626 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#17627 = DIRECTION('',(-1.,-9.95799250103E-17,3.700743415417E-16)); +#17628 = PCURVE('',#11816,#17629); +#17629 = DEFINITIONAL_REPRESENTATION('',(#17630),#17634); +#17630 = CIRCLE('',#17631,0.3); +#17631 = AXIS2_PLACEMENT_2D('',#17632,#17633); +#17632 = CARTESIAN_POINT('',(0.192340342435,0.16578967201)); +#17633 = DIRECTION('',(3.700743415417E-16,-1.)); +#17634 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17635 = PCURVE('',#17636,#17641); +#17636 = CYLINDRICAL_SURFACE('',#17637,0.3); +#17637 = AXIS2_PLACEMENT_3D('',#17638,#17639,#17640); +#17638 = CARTESIAN_POINT('',(-2.25,-0.205,0.725)); +#17639 = DIRECTION('',(9.95799250103E-17,-1.,-0.)); +#17640 = DIRECTION('',(-1.,-9.95799250103E-17,3.700743415417E-16)); +#17641 = DEFINITIONAL_REPRESENTATION('',(#17642),#17646); +#17642 = LINE('',#17643,#17644); +#17643 = CARTESIAN_POINT('',(6.28318530718,0.)); +#17644 = VECTOR('',#17645,1.); +#17645 = DIRECTION('',(-1.,0.)); +#17646 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17647 = ORIENTED_EDGE('',*,*,#17648,.T.); +#17648 = EDGE_CURVE('',#17620,#11801,#17649,.T.); +#17649 = SURFACE_CURVE('',#17650,(#17654,#17661),.PCURVE_S1.); +#17650 = LINE('',#17651,#17652); +#17651 = CARTESIAN_POINT('',(-2.25,-0.205,1.025)); +#17652 = VECTOR('',#17653,1.); +#17653 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#17654 = PCURVE('',#11816,#17655); +#17655 = DEFINITIONAL_REPRESENTATION('',(#17656),#17660); +#17656 = LINE('',#17657,#17658); +#17657 = CARTESIAN_POINT('',(0.492340342435,0.16578967201)); +#17658 = VECTOR('',#17659,1.); +#17659 = DIRECTION('',(0.,1.)); +#17660 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17661 = PCURVE('',#13362,#17662); +#17662 = DEFINITIONAL_REPRESENTATION('',(#17663),#17667); +#17663 = LINE('',#17664,#17665); +#17664 = CARTESIAN_POINT('',(0.,0.)); +#17665 = VECTOR('',#17666,1.); +#17666 = DIRECTION('',(1.,0.)); +#17667 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17668 = ADVANCED_FACE('',(#17669),#11873,.T.); +#17669 = FACE_BOUND('',#17670,.T.); +#17670 = EDGE_LOOP('',(#17671,#17672,#17673,#17701,#17724,#17748,#17771, + #17794,#17817,#17845,#17868,#17892)); +#17671 = ORIENTED_EDGE('',*,*,#11857,.F.); +#17672 = ORIENTED_EDGE('',*,*,#11962,.T.); +#17673 = ORIENTED_EDGE('',*,*,#17674,.T.); +#17674 = EDGE_CURVE('',#11963,#17675,#17677,.T.); +#17675 = VERTEX_POINT('',#17676); +#17676 = CARTESIAN_POINT('',(-2.35,0.205,0.725)); +#17677 = SURFACE_CURVE('',#17678,(#17683,#17694),.PCURVE_S1.); +#17678 = CIRCLE('',#17679,0.1); +#17679 = AXIS2_PLACEMENT_3D('',#17680,#17681,#17682); +#17680 = CARTESIAN_POINT('',(-2.25,0.205,0.725)); +#17681 = DIRECTION('',(9.95799250103E-17,-1.,0.)); +#17682 = DIRECTION('',(-4.440892098501E-15,-4.422237021476E-31,1.)); +#17683 = PCURVE('',#11873,#17684); +#17684 = DEFINITIONAL_REPRESENTATION('',(#17685),#17693); +#17685 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#17686,#17687,#17688,#17689 + ,#17690,#17691,#17692),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#17686 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#17687 = CARTESIAN_POINT('',(0.292340342435,-7.415408746888E-03)); +#17688 = CARTESIAN_POINT('',(0.142340342435,7.918713163156E-02)); +#17689 = CARTESIAN_POINT('',(-7.659657565E-03,0.16578967201)); +#17690 = CARTESIAN_POINT('',(0.142340342435,0.252392212388)); +#17691 = CARTESIAN_POINT('',(0.292340342435,0.338994752767)); +#17692 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#17693 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17694 = PCURVE('',#11999,#17695); +#17695 = DEFINITIONAL_REPRESENTATION('',(#17696),#17700); +#17696 = LINE('',#17697,#17698); +#17697 = CARTESIAN_POINT('',(0.,-0.41)); +#17698 = VECTOR('',#17699,1.); +#17699 = DIRECTION('',(1.,0.)); +#17700 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17701 = ORIENTED_EDGE('',*,*,#17702,.T.); +#17702 = EDGE_CURVE('',#17675,#17703,#17705,.T.); +#17703 = VERTEX_POINT('',#17704); +#17704 = CARTESIAN_POINT('',(-2.35,0.205,0.3)); +#17705 = SURFACE_CURVE('',#17706,(#17710,#17717),.PCURVE_S1.); +#17706 = LINE('',#17707,#17708); +#17707 = CARTESIAN_POINT('',(-2.35,0.205,0.725)); +#17708 = VECTOR('',#17709,1.); +#17709 = DIRECTION('',(-1.044915787883E-15,-1.040526357994E-31,-1.)); +#17710 = PCURVE('',#11873,#17711); +#17711 = DEFINITIONAL_REPRESENTATION('',(#17712),#17716); +#17712 = LINE('',#17713,#17714); +#17713 = CARTESIAN_POINT('',(0.192340342435,6.578967201E-02)); +#17714 = VECTOR('',#17715,1.); +#17715 = DIRECTION('',(-1.,-1.044915787883E-15)); +#17716 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17717 = PCURVE('',#17433,#17718); +#17718 = DEFINITIONAL_REPRESENTATION('',(#17719),#17723); +#17719 = LINE('',#17720,#17721); +#17720 = CARTESIAN_POINT('',(-4.266158067775E-32,-0.41)); +#17721 = VECTOR('',#17722,1.); +#17722 = DIRECTION('',(1.,0.)); +#17723 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17724 = ORIENTED_EDGE('',*,*,#17725,.T.); +#17725 = EDGE_CURVE('',#17703,#17726,#17728,.T.); +#17726 = VERTEX_POINT('',#17727); +#17727 = CARTESIAN_POINT('',(-2.65,0.205,5.551115123126E-17)); +#17728 = SURFACE_CURVE('',#17729,(#17734,#17741),.PCURVE_S1.); +#17729 = CIRCLE('',#17730,0.3); +#17730 = AXIS2_PLACEMENT_3D('',#17731,#17732,#17733); +#17731 = CARTESIAN_POINT('',(-2.65,0.205,0.3)); +#17732 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#17733 = DIRECTION('',(1.,9.95799250103E-17,3.515706244646E-15)); +#17734 = PCURVE('',#11873,#17735); +#17735 = DEFINITIONAL_REPRESENTATION('',(#17736),#17740); +#17736 = CIRCLE('',#17737,0.3); +#17737 = AXIS2_PLACEMENT_2D('',#17738,#17739); +#17738 = CARTESIAN_POINT('',(-0.232659657565,-0.23421032799)); +#17739 = DIRECTION('',(3.515706244646E-15,1.)); +#17740 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17741 = PCURVE('',#17462,#17742); +#17742 = DEFINITIONAL_REPRESENTATION('',(#17743),#17747); +#17743 = LINE('',#17744,#17745); +#17744 = CARTESIAN_POINT('',(6.28318530718,-0.41)); +#17745 = VECTOR('',#17746,1.); +#17746 = DIRECTION('',(-1.,-3.533949646071E-17)); +#17747 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17748 = ORIENTED_EDGE('',*,*,#17749,.T.); +#17749 = EDGE_CURVE('',#17726,#17750,#17752,.T.); +#17750 = VERTEX_POINT('',#17751); +#17751 = CARTESIAN_POINT('',(-3.,0.205,5.551115123126E-17)); +#17752 = SURFACE_CURVE('',#17753,(#17757,#17764),.PCURVE_S1.); +#17753 = LINE('',#17754,#17755); +#17754 = CARTESIAN_POINT('',(-2.65,0.205,5.551115123126E-17)); +#17755 = VECTOR('',#17756,1.); +#17756 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#17757 = PCURVE('',#11873,#17758); +#17758 = DEFINITIONAL_REPRESENTATION('',(#17759),#17763); +#17759 = LINE('',#17760,#17761); +#17760 = CARTESIAN_POINT('',(-0.532659657565,-0.23421032799)); +#17761 = VECTOR('',#17762,1.); +#17762 = DIRECTION('',(0.,-1.)); +#17763 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17764 = PCURVE('',#17490,#17765); +#17765 = DEFINITIONAL_REPRESENTATION('',(#17766),#17770); +#17766 = LINE('',#17767,#17768); +#17767 = CARTESIAN_POINT('',(-4.082776925422E-17,-0.41)); +#17768 = VECTOR('',#17769,1.); +#17769 = DIRECTION('',(1.,0.)); +#17770 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17771 = ORIENTED_EDGE('',*,*,#17772,.T.); +#17772 = EDGE_CURVE('',#17750,#17773,#17775,.T.); +#17773 = VERTEX_POINT('',#17774); +#17774 = CARTESIAN_POINT('',(-3.,0.205,0.2)); +#17775 = SURFACE_CURVE('',#17776,(#17780,#17787),.PCURVE_S1.); +#17776 = LINE('',#17777,#17778); +#17777 = CARTESIAN_POINT('',(-3.,0.205,5.551115123126E-17)); +#17778 = VECTOR('',#17779,1.); +#17779 = DIRECTION('',(0.,0.,1.)); +#17780 = PCURVE('',#11873,#17781); +#17781 = DEFINITIONAL_REPRESENTATION('',(#17782),#17786); +#17782 = LINE('',#17783,#17784); +#17783 = CARTESIAN_POINT('',(-0.532659657565,-0.58421032799)); +#17784 = VECTOR('',#17785,1.); +#17785 = DIRECTION('',(1.,0.)); +#17786 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17787 = PCURVE('',#17518,#17788); +#17788 = DEFINITIONAL_REPRESENTATION('',(#17789),#17793); +#17789 = LINE('',#17790,#17791); +#17790 = CARTESIAN_POINT('',(0.,-0.41)); +#17791 = VECTOR('',#17792,1.); +#17792 = DIRECTION('',(1.,0.)); +#17793 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17794 = ORIENTED_EDGE('',*,*,#17795,.T.); +#17795 = EDGE_CURVE('',#17773,#17796,#17798,.T.); +#17796 = VERTEX_POINT('',#17797); +#17797 = CARTESIAN_POINT('',(-2.65,0.205,0.2)); +#17798 = SURFACE_CURVE('',#17799,(#17803,#17810),.PCURVE_S1.); +#17799 = LINE('',#17800,#17801); +#17800 = CARTESIAN_POINT('',(-3.,0.205,0.2)); +#17801 = VECTOR('',#17802,1.); +#17802 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#17803 = PCURVE('',#11873,#17804); +#17804 = DEFINITIONAL_REPRESENTATION('',(#17805),#17809); +#17805 = LINE('',#17806,#17807); +#17806 = CARTESIAN_POINT('',(-0.332659657565,-0.58421032799)); +#17807 = VECTOR('',#17808,1.); +#17808 = DIRECTION('',(0.,1.)); +#17809 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17810 = PCURVE('',#17546,#17811); +#17811 = DEFINITIONAL_REPRESENTATION('',(#17812),#17816); +#17812 = LINE('',#17813,#17814); +#17813 = CARTESIAN_POINT('',(4.082776925422E-17,-0.41)); +#17814 = VECTOR('',#17815,1.); +#17815 = DIRECTION('',(1.,0.)); +#17816 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17817 = ORIENTED_EDGE('',*,*,#17818,.T.); +#17818 = EDGE_CURVE('',#17796,#17819,#17821,.T.); +#17819 = VERTEX_POINT('',#17820); +#17820 = CARTESIAN_POINT('',(-2.55,0.205,0.3)); +#17821 = SURFACE_CURVE('',#17822,(#17827,#17838),.PCURVE_S1.); +#17822 = CIRCLE('',#17823,0.1); +#17823 = AXIS2_PLACEMENT_3D('',#17824,#17825,#17826); +#17824 = CARTESIAN_POINT('',(-2.65,0.205,0.3)); +#17825 = DIRECTION('',(9.95799250103E-17,-1.,-0.)); +#17826 = DIRECTION('',(-0.,0.,-1.)); +#17827 = PCURVE('',#11873,#17828); +#17828 = DEFINITIONAL_REPRESENTATION('',(#17829),#17837); +#17829 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#17830,#17831,#17832,#17833 + ,#17834,#17835,#17836),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#17830 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#17831 = CARTESIAN_POINT('',(-0.332659657565,-6.100524723311E-02)); +#17832 = CARTESIAN_POINT('',(-0.182659657565,-0.147607787612)); +#17833 = CARTESIAN_POINT('',(-3.2659657565E-02,-0.23421032799)); +#17834 = CARTESIAN_POINT('',(-0.182659657565,-0.320812868368)); +#17835 = CARTESIAN_POINT('',(-0.332659657565,-0.407415408747)); +#17836 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#17837 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17838 = PCURVE('',#17579,#17839); +#17839 = DEFINITIONAL_REPRESENTATION('',(#17840),#17844); +#17840 = LINE('',#17841,#17842); +#17841 = CARTESIAN_POINT('',(0.,-0.41)); +#17842 = VECTOR('',#17843,1.); +#17843 = DIRECTION('',(1.,3.533949646071E-17)); +#17844 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17845 = ORIENTED_EDGE('',*,*,#17846,.T.); +#17846 = EDGE_CURVE('',#17819,#17847,#17849,.T.); +#17847 = VERTEX_POINT('',#17848); +#17848 = CARTESIAN_POINT('',(-2.55,0.205,0.725)); +#17849 = SURFACE_CURVE('',#17850,(#17854,#17861),.PCURVE_S1.); +#17850 = LINE('',#17851,#17852); +#17851 = CARTESIAN_POINT('',(-2.55,0.205,0.3)); +#17852 = VECTOR('',#17853,1.); +#17853 = DIRECTION('',(0.,0.,1.)); +#17854 = PCURVE('',#11873,#17855); +#17855 = DEFINITIONAL_REPRESENTATION('',(#17856),#17860); +#17856 = LINE('',#17857,#17858); +#17857 = CARTESIAN_POINT('',(-0.232659657565,-0.13421032799)); +#17858 = VECTOR('',#17859,1.); +#17859 = DIRECTION('',(1.,0.)); +#17860 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17861 = PCURVE('',#17607,#17862); +#17862 = DEFINITIONAL_REPRESENTATION('',(#17863),#17867); +#17863 = LINE('',#17864,#17865); +#17864 = CARTESIAN_POINT('',(0.,-0.41)); +#17865 = VECTOR('',#17866,1.); +#17866 = DIRECTION('',(1.,0.)); +#17867 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17868 = ORIENTED_EDGE('',*,*,#17869,.T.); +#17869 = EDGE_CURVE('',#17847,#17870,#17872,.T.); +#17870 = VERTEX_POINT('',#17871); +#17871 = CARTESIAN_POINT('',(-2.25,0.205,1.025)); +#17872 = SURFACE_CURVE('',#17873,(#17878,#17885),.PCURVE_S1.); +#17873 = CIRCLE('',#17874,0.3); +#17874 = AXIS2_PLACEMENT_3D('',#17875,#17876,#17877); +#17875 = CARTESIAN_POINT('',(-2.25,0.205,0.725)); +#17876 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#17877 = DIRECTION('',(-1.,-9.95799250103E-17,3.700743415417E-16)); +#17878 = PCURVE('',#11873,#17879); +#17879 = DEFINITIONAL_REPRESENTATION('',(#17880),#17884); +#17880 = CIRCLE('',#17881,0.3); +#17881 = AXIS2_PLACEMENT_2D('',#17882,#17883); +#17882 = CARTESIAN_POINT('',(0.192340342435,0.16578967201)); +#17883 = DIRECTION('',(3.700743415417E-16,-1.)); +#17884 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17885 = PCURVE('',#17636,#17886); +#17886 = DEFINITIONAL_REPRESENTATION('',(#17887),#17891); +#17887 = LINE('',#17888,#17889); +#17888 = CARTESIAN_POINT('',(6.28318530718,-0.41)); +#17889 = VECTOR('',#17890,1.); +#17890 = DIRECTION('',(-1.,0.)); +#17891 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17892 = ORIENTED_EDGE('',*,*,#17893,.T.); +#17893 = EDGE_CURVE('',#17870,#11858,#17894,.T.); +#17894 = SURFACE_CURVE('',#17895,(#17899,#17906),.PCURVE_S1.); +#17895 = LINE('',#17896,#17897); +#17896 = CARTESIAN_POINT('',(-2.25,0.205,1.025)); +#17897 = VECTOR('',#17898,1.); +#17898 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#17899 = PCURVE('',#11873,#17900); +#17900 = DEFINITIONAL_REPRESENTATION('',(#17901),#17905); +#17901 = LINE('',#17902,#17903); +#17902 = CARTESIAN_POINT('',(0.492340342435,0.16578967201)); +#17903 = VECTOR('',#17904,1.); +#17904 = DIRECTION('',(0.,1.)); +#17905 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17906 = PCURVE('',#13362,#17907); +#17907 = DEFINITIONAL_REPRESENTATION('',(#17908),#17912); +#17908 = LINE('',#17909,#17910); +#17909 = CARTESIAN_POINT('',(4.082776925422E-17,-0.41)); +#17910 = VECTOR('',#17911,1.); +#17911 = DIRECTION('',(1.,0.)); +#17912 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17913 = ADVANCED_FACE('',(#17914),#11923,.F.); +#17914 = FACE_BOUND('',#17915,.F.); +#17915 = EDGE_LOOP('',(#17916,#17936,#17937,#17957)); +#17916 = ORIENTED_EDGE('',*,*,#17917,.F.); +#17917 = EDGE_CURVE('',#11858,#13347,#17918,.T.); +#17918 = SURFACE_CURVE('',#17919,(#17923,#17929),.PCURVE_S1.); +#17919 = LINE('',#17920,#17921); +#17920 = CARTESIAN_POINT('',(-2.25,0.205,1.025)); +#17921 = VECTOR('',#17922,1.); +#17922 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#17923 = PCURVE('',#11923,#17924); +#17924 = DEFINITIONAL_REPRESENTATION('',(#17925),#17928); +#17925 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#17926,#17927),.UNSPECIFIED., + .F.,.F.,(2,2),(0.3,0.375),.PIECEWISE_BEZIER_KNOTS.); +#17926 = CARTESIAN_POINT('',(4.38,2.079019460508E-15)); +#17927 = CARTESIAN_POINT('',(4.381858006042,1.)); +#17928 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17929 = PCURVE('',#13362,#17930); +#17930 = DEFINITIONAL_REPRESENTATION('',(#17931),#17935); +#17931 = LINE('',#17932,#17933); +#17932 = CARTESIAN_POINT('',(4.082776925422E-17,-0.41)); +#17933 = VECTOR('',#17934,1.); +#17934 = DIRECTION('',(1.,0.)); +#17935 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17936 = ORIENTED_EDGE('',*,*,#11909,.T.); +#17937 = ORIENTED_EDGE('',*,*,#17938,.T.); +#17938 = EDGE_CURVE('',#11887,#13375,#17939,.T.); +#17939 = SURFACE_CURVE('',#17940,(#17944,#17950),.PCURVE_S1.); +#17940 = LINE('',#17941,#17942); +#17941 = CARTESIAN_POINT('',(-2.25,1.065,1.025)); +#17942 = VECTOR('',#17943,1.); +#17943 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#17944 = PCURVE('',#11923,#17945); +#17945 = DEFINITIONAL_REPRESENTATION('',(#17946),#17949); +#17946 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#17947,#17948),.UNSPECIFIED., + .F.,.F.,(2,2),(0.3,0.375),.PIECEWISE_BEZIER_KNOTS.); +#17947 = CARTESIAN_POINT('',(5.24,1.882142905503E-15)); +#17948 = CARTESIAN_POINT('',(5.249652567976,1.)); +#17949 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17950 = PCURVE('',#13412,#17951); +#17951 = DEFINITIONAL_REPRESENTATION('',(#17952),#17956); +#17952 = LINE('',#17953,#17954); +#17953 = CARTESIAN_POINT('',(0.,0.)); +#17954 = VECTOR('',#17955,1.); +#17955 = DIRECTION('',(1.,0.)); +#17956 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17957 = ORIENTED_EDGE('',*,*,#13374,.F.); +#17958 = ADVANCED_FACE('',(#17959),#11999,.F.); +#17959 = FACE_BOUND('',#17960,.F.); +#17960 = EDGE_LOOP('',(#17961,#17962,#17963,#17984)); +#17961 = ORIENTED_EDGE('',*,*,#11985,.T.); +#17962 = ORIENTED_EDGE('',*,*,#17674,.T.); +#17963 = ORIENTED_EDGE('',*,*,#17964,.F.); +#17964 = EDGE_CURVE('',#17390,#17675,#17965,.T.); +#17965 = SURFACE_CURVE('',#17966,(#17970,#17977),.PCURVE_S1.); +#17966 = LINE('',#17967,#17968); +#17967 = CARTESIAN_POINT('',(-2.35,-0.205,0.725)); +#17968 = VECTOR('',#17969,1.); +#17969 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#17970 = PCURVE('',#11999,#17971); +#17971 = DEFINITIONAL_REPRESENTATION('',(#17972),#17976); +#17972 = LINE('',#17973,#17974); +#17973 = CARTESIAN_POINT('',(1.570796326795,0.)); +#17974 = VECTOR('',#17975,1.); +#17975 = DIRECTION('',(0.,-1.)); +#17976 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17977 = PCURVE('',#17433,#17978); +#17978 = DEFINITIONAL_REPRESENTATION('',(#17979),#17983); +#17979 = LINE('',#17980,#17981); +#17980 = CARTESIAN_POINT('',(-0.,0.)); +#17981 = VECTOR('',#17982,1.); +#17982 = DIRECTION('',(6.767833676919E-44,-1.)); +#17983 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#17984 = ORIENTED_EDGE('',*,*,#17389,.F.); +#17985 = ADVANCED_FACE('',(#17986),#12030,.F.); +#17986 = FACE_BOUND('',#17987,.F.); +#17987 = EDGE_LOOP('',(#17988,#17989,#17990,#17991)); +#17988 = ORIENTED_EDGE('',*,*,#12016,.T.); +#17989 = ORIENTED_EDGE('',*,*,#13076,.T.); +#17990 = ORIENTED_EDGE('',*,*,#13125,.F.); +#17991 = ORIENTED_EDGE('',*,*,#14366,.F.); +#17992 = ADVANCED_FACE('',(#17993),#13212,.F.); +#17993 = FACE_BOUND('',#17994,.F.); +#17994 = EDGE_LOOP('',(#17995,#17996,#18017,#18018,#18019,#18020)); +#17995 = ORIENTED_EDGE('',*,*,#14036,.F.); +#17996 = ORIENTED_EDGE('',*,*,#17997,.T.); +#17997 = EDGE_CURVE('',#14008,#14615,#17998,.T.); +#17998 = SURFACE_CURVE('',#17999,(#18003,#18010),.PCURVE_S1.); +#17999 = LINE('',#18000,#18001); +#18000 = CARTESIAN_POINT('',(-2.25,-4.015,1.025)); +#18001 = VECTOR('',#18002,1.); +#18002 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#18003 = PCURVE('',#13212,#18004); +#18004 = DEFINITIONAL_REPRESENTATION('',(#18005),#18009); +#18005 = LINE('',#18006,#18007); +#18006 = CARTESIAN_POINT('',(0.,0.)); +#18007 = VECTOR('',#18008,1.); +#18008 = DIRECTION('',(0.,-1.)); +#18009 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18010 = PCURVE('',#14024,#18011); +#18011 = DEFINITIONAL_REPRESENTATION('',(#18012),#18016); +#18012 = LINE('',#18013,#18014); +#18013 = CARTESIAN_POINT('',(4.712388980385,0.)); +#18014 = VECTOR('',#18015,1.); +#18015 = DIRECTION('',(0.,-1.)); +#18016 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18017 = ORIENTED_EDGE('',*,*,#14638,.T.); +#18018 = ORIENTED_EDGE('',*,*,#14934,.T.); +#18019 = ORIENTED_EDGE('',*,*,#13196,.F.); +#18020 = ORIENTED_EDGE('',*,*,#13751,.F.); +#18021 = ADVANCED_FACE('',(#18022),#13262,.F.); +#18022 = FACE_BOUND('',#18023,.F.); +#18023 = EDGE_LOOP('',(#18024,#18025,#18046,#18047,#18048,#18049)); +#18024 = ORIENTED_EDGE('',*,*,#15240,.F.); +#18025 = ORIENTED_EDGE('',*,*,#18026,.T.); +#18026 = EDGE_CURVE('',#15212,#15819,#18027,.T.); +#18027 = SURFACE_CURVE('',#18028,(#18032,#18039),.PCURVE_S1.); +#18028 = LINE('',#18029,#18030); +#18029 = CARTESIAN_POINT('',(-2.25,-2.745,1.025)); +#18030 = VECTOR('',#18031,1.); +#18031 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#18032 = PCURVE('',#13262,#18033); +#18033 = DEFINITIONAL_REPRESENTATION('',(#18034),#18038); +#18034 = LINE('',#18035,#18036); +#18035 = CARTESIAN_POINT('',(0.,0.)); +#18036 = VECTOR('',#18037,1.); +#18037 = DIRECTION('',(0.,-1.)); +#18038 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18039 = PCURVE('',#15228,#18040); +#18040 = DEFINITIONAL_REPRESENTATION('',(#18041),#18045); +#18041 = LINE('',#18042,#18043); +#18042 = CARTESIAN_POINT('',(4.712388980385,0.)); +#18043 = VECTOR('',#18044,1.); +#18044 = DIRECTION('',(0.,-1.)); +#18045 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18046 = ORIENTED_EDGE('',*,*,#15842,.T.); +#18047 = ORIENTED_EDGE('',*,*,#16138,.T.); +#18048 = ORIENTED_EDGE('',*,*,#13246,.F.); +#18049 = ORIENTED_EDGE('',*,*,#14955,.F.); +#18050 = ADVANCED_FACE('',(#18051),#13512,.F.); +#18051 = FACE_BOUND('',#18052,.F.); +#18052 = EDGE_LOOP('',(#18053,#18054,#18075,#18076,#18077,#18078)); +#18053 = ORIENTED_EDGE('',*,*,#14883,.F.); +#18054 = ORIENTED_EDGE('',*,*,#18055,.T.); +#18055 = EDGE_CURVE('',#14860,#14293,#18056,.T.); +#18056 = SURFACE_CURVE('',#18057,(#18061,#18068),.PCURVE_S1.); +#18057 = LINE('',#18058,#18059); +#18058 = CARTESIAN_POINT('',(-2.25,3.605,1.025)); +#18059 = VECTOR('',#18060,1.); +#18060 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#18061 = PCURVE('',#13512,#18062); +#18062 = DEFINITIONAL_REPRESENTATION('',(#18063),#18067); +#18063 = LINE('',#18064,#18065); +#18064 = CARTESIAN_POINT('',(0.,0.)); +#18065 = VECTOR('',#18066,1.); +#18066 = DIRECTION('',(0.,-1.)); +#18067 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18068 = PCURVE('',#14309,#18069); +#18069 = DEFINITIONAL_REPRESENTATION('',(#18070),#18074); +#18070 = LINE('',#18071,#18072); +#18071 = CARTESIAN_POINT('',(4.712388980385,0.)); +#18072 = VECTOR('',#18073,1.); +#18073 = DIRECTION('',(0.,-1.)); +#18074 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18075 = ORIENTED_EDGE('',*,*,#14321,.T.); +#18076 = ORIENTED_EDGE('',*,*,#14345,.T.); +#18077 = ORIENTED_EDGE('',*,*,#13496,.F.); +#18078 = ORIENTED_EDGE('',*,*,#15570,.F.); +#18079 = ADVANCED_FACE('',(#18080),#13312,.F.); +#18080 = FACE_BOUND('',#18081,.F.); +#18081 = EDGE_LOOP('',(#18082,#18083,#18104,#18105,#18106,#18107)); +#18082 = ORIENTED_EDGE('',*,*,#16444,.F.); +#18083 = ORIENTED_EDGE('',*,*,#18084,.T.); +#18084 = EDGE_CURVE('',#16416,#17023,#18085,.T.); +#18085 = SURFACE_CURVE('',#18086,(#18090,#18097),.PCURVE_S1.); +#18086 = LINE('',#18087,#18088); +#18087 = CARTESIAN_POINT('',(-2.25,-1.475,1.025)); +#18088 = VECTOR('',#18089,1.); +#18089 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#18090 = PCURVE('',#13312,#18091); +#18091 = DEFINITIONAL_REPRESENTATION('',(#18092),#18096); +#18092 = LINE('',#18093,#18094); +#18093 = CARTESIAN_POINT('',(0.,0.)); +#18094 = VECTOR('',#18095,1.); +#18095 = DIRECTION('',(0.,-1.)); +#18096 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18097 = PCURVE('',#16432,#18098); +#18098 = DEFINITIONAL_REPRESENTATION('',(#18099),#18103); +#18099 = LINE('',#18100,#18101); +#18100 = CARTESIAN_POINT('',(4.712388980385,0.)); +#18101 = VECTOR('',#18102,1.); +#18102 = DIRECTION('',(0.,-1.)); +#18103 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18104 = ORIENTED_EDGE('',*,*,#17046,.T.); +#18105 = ORIENTED_EDGE('',*,*,#17342,.T.); +#18106 = ORIENTED_EDGE('',*,*,#13296,.F.); +#18107 = ORIENTED_EDGE('',*,*,#16159,.F.); +#18108 = ADVANCED_FACE('',(#18109),#13462,.F.); +#18109 = FACE_BOUND('',#18110,.F.); +#18110 = EDGE_LOOP('',(#18111,#18112,#18133,#18134,#18135,#18136)); +#18111 = ORIENTED_EDGE('',*,*,#16087,.F.); +#18112 = ORIENTED_EDGE('',*,*,#18113,.T.); +#18113 = EDGE_CURVE('',#16064,#15497,#18114,.T.); +#18114 = SURFACE_CURVE('',#18115,(#18119,#18126),.PCURVE_S1.); +#18115 = LINE('',#18116,#18117); +#18116 = CARTESIAN_POINT('',(-2.25,2.335,1.025)); +#18117 = VECTOR('',#18118,1.); +#18118 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#18119 = PCURVE('',#13462,#18120); +#18120 = DEFINITIONAL_REPRESENTATION('',(#18121),#18125); +#18121 = LINE('',#18122,#18123); +#18122 = CARTESIAN_POINT('',(0.,0.)); +#18123 = VECTOR('',#18124,1.); +#18124 = DIRECTION('',(0.,-1.)); +#18125 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18126 = PCURVE('',#15513,#18127); +#18127 = DEFINITIONAL_REPRESENTATION('',(#18128),#18132); +#18128 = LINE('',#18129,#18130); +#18129 = CARTESIAN_POINT('',(4.712388980385,0.)); +#18130 = VECTOR('',#18131,1.); +#18131 = DIRECTION('',(0.,-1.)); +#18132 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18133 = ORIENTED_EDGE('',*,*,#15525,.T.); +#18134 = ORIENTED_EDGE('',*,*,#15549,.T.); +#18135 = ORIENTED_EDGE('',*,*,#13446,.F.); +#18136 = ORIENTED_EDGE('',*,*,#16774,.F.); +#18137 = ADVANCED_FACE('',(#18138),#13362,.F.); +#18138 = FACE_BOUND('',#18139,.F.); +#18139 = EDGE_LOOP('',(#18140,#18141,#18162,#18163,#18164,#18165)); +#18140 = ORIENTED_EDGE('',*,*,#17648,.F.); +#18141 = ORIENTED_EDGE('',*,*,#18142,.T.); +#18142 = EDGE_CURVE('',#17620,#17870,#18143,.T.); +#18143 = SURFACE_CURVE('',#18144,(#18148,#18155),.PCURVE_S1.); +#18144 = LINE('',#18145,#18146); +#18145 = CARTESIAN_POINT('',(-2.25,-0.205,1.025)); +#18146 = VECTOR('',#18147,1.); +#18147 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#18148 = PCURVE('',#13362,#18149); +#18149 = DEFINITIONAL_REPRESENTATION('',(#18150),#18154); +#18150 = LINE('',#18151,#18152); +#18151 = CARTESIAN_POINT('',(0.,0.)); +#18152 = VECTOR('',#18153,1.); +#18153 = DIRECTION('',(0.,-1.)); +#18154 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18155 = PCURVE('',#17636,#18156); +#18156 = DEFINITIONAL_REPRESENTATION('',(#18157),#18161); +#18157 = LINE('',#18158,#18159); +#18158 = CARTESIAN_POINT('',(4.712388980385,0.)); +#18159 = VECTOR('',#18160,1.); +#18160 = DIRECTION('',(0.,-1.)); +#18161 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18162 = ORIENTED_EDGE('',*,*,#17893,.T.); +#18163 = ORIENTED_EDGE('',*,*,#17917,.T.); +#18164 = ORIENTED_EDGE('',*,*,#13346,.F.); +#18165 = ORIENTED_EDGE('',*,*,#17363,.F.); +#18166 = ADVANCED_FACE('',(#18167),#13412,.F.); +#18167 = FACE_BOUND('',#18168,.F.); +#18168 = EDGE_LOOP('',(#18169,#18170,#18191,#18192,#18193,#18194)); +#18169 = ORIENTED_EDGE('',*,*,#17291,.F.); +#18170 = ORIENTED_EDGE('',*,*,#18171,.T.); +#18171 = EDGE_CURVE('',#17268,#16701,#18172,.T.); +#18172 = SURFACE_CURVE('',#18173,(#18177,#18184),.PCURVE_S1.); +#18173 = LINE('',#18174,#18175); +#18174 = CARTESIAN_POINT('',(-2.25,1.065,1.025)); +#18175 = VECTOR('',#18176,1.); +#18176 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#18177 = PCURVE('',#13412,#18178); +#18178 = DEFINITIONAL_REPRESENTATION('',(#18179),#18183); +#18179 = LINE('',#18180,#18181); +#18180 = CARTESIAN_POINT('',(0.,0.)); +#18181 = VECTOR('',#18182,1.); +#18182 = DIRECTION('',(0.,-1.)); +#18183 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18184 = PCURVE('',#16717,#18185); +#18185 = DEFINITIONAL_REPRESENTATION('',(#18186),#18190); +#18186 = LINE('',#18187,#18188); +#18187 = CARTESIAN_POINT('',(4.712388980385,0.)); +#18188 = VECTOR('',#18189,1.); +#18189 = DIRECTION('',(0.,-1.)); +#18190 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18191 = ORIENTED_EDGE('',*,*,#16729,.T.); +#18192 = ORIENTED_EDGE('',*,*,#16753,.T.); +#18193 = ORIENTED_EDGE('',*,*,#13396,.F.); +#18194 = ORIENTED_EDGE('',*,*,#17938,.F.); +#18195 = ADVANCED_FACE('',(#18196),#13659,.T.); +#18196 = FACE_BOUND('',#18197,.T.); +#18197 = EDGE_LOOP('',(#18198)); +#18198 = ORIENTED_EDGE('',*,*,#13642,.T.); +#18199 = ADVANCED_FACE('',(#18200),#14024,.T.); +#18200 = FACE_BOUND('',#18201,.T.); +#18201 = EDGE_LOOP('',(#18202,#18203,#18204,#18205)); +#18202 = ORIENTED_EDGE('',*,*,#14007,.T.); +#18203 = ORIENTED_EDGE('',*,*,#17997,.T.); +#18204 = ORIENTED_EDGE('',*,*,#14614,.F.); +#18205 = ORIENTED_EDGE('',*,*,#18206,.F.); +#18206 = EDGE_CURVE('',#13980,#14592,#18207,.T.); +#18207 = SURFACE_CURVE('',#18208,(#18212,#18219),.PCURVE_S1.); +#18208 = LINE('',#18209,#18210); +#18209 = CARTESIAN_POINT('',(-2.55,-4.015,0.725)); +#18210 = VECTOR('',#18211,1.); +#18211 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#18212 = PCURVE('',#14024,#18213); +#18213 = DEFINITIONAL_REPRESENTATION('',(#18214),#18218); +#18214 = LINE('',#18215,#18216); +#18215 = CARTESIAN_POINT('',(6.28318530718,0.)); +#18216 = VECTOR('',#18217,1.); +#18217 = DIRECTION('',(0.,-1.)); +#18218 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18219 = PCURVE('',#13995,#18220); +#18220 = DEFINITIONAL_REPRESENTATION('',(#18221),#18225); +#18221 = LINE('',#18222,#18223); +#18222 = CARTESIAN_POINT('',(0.425,0.)); +#18223 = VECTOR('',#18224,1.); +#18224 = DIRECTION('',(0.,-1.)); +#18225 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18226 = ADVANCED_FACE('',(#18227),#13995,.F.); +#18227 = FACE_BOUND('',#18228,.F.); +#18228 = EDGE_LOOP('',(#18229,#18250,#18251,#18252)); +#18229 = ORIENTED_EDGE('',*,*,#18230,.T.); +#18230 = EDGE_CURVE('',#13947,#14564,#18231,.T.); +#18231 = SURFACE_CURVE('',#18232,(#18236,#18243),.PCURVE_S1.); +#18232 = LINE('',#18233,#18234); +#18233 = CARTESIAN_POINT('',(-2.55,-4.015,0.3)); +#18234 = VECTOR('',#18235,1.); +#18235 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#18236 = PCURVE('',#13995,#18237); +#18237 = DEFINITIONAL_REPRESENTATION('',(#18238),#18242); +#18238 = LINE('',#18239,#18240); +#18239 = CARTESIAN_POINT('',(0.,0.)); +#18240 = VECTOR('',#18241,1.); +#18241 = DIRECTION('',(0.,-1.)); +#18242 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18243 = PCURVE('',#13967,#18244); +#18244 = DEFINITIONAL_REPRESENTATION('',(#18245),#18249); +#18245 = LINE('',#18246,#18247); +#18246 = CARTESIAN_POINT('',(1.570796326795,0.)); +#18247 = VECTOR('',#18248,1.); +#18248 = DIRECTION('',(0.,-1.)); +#18249 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18250 = ORIENTED_EDGE('',*,*,#14591,.T.); +#18251 = ORIENTED_EDGE('',*,*,#18206,.F.); +#18252 = ORIENTED_EDGE('',*,*,#13979,.F.); +#18253 = ADVANCED_FACE('',(#18254),#13967,.F.); +#18254 = FACE_BOUND('',#18255,.F.); +#18255 = EDGE_LOOP('',(#18256,#18277,#18278,#18279)); +#18256 = ORIENTED_EDGE('',*,*,#18257,.T.); +#18257 = EDGE_CURVE('',#13919,#14541,#18258,.T.); +#18258 = SURFACE_CURVE('',#18259,(#18263,#18270),.PCURVE_S1.); +#18259 = LINE('',#18260,#18261); +#18260 = CARTESIAN_POINT('',(-2.65,-4.015,0.2)); +#18261 = VECTOR('',#18262,1.); +#18262 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#18263 = PCURVE('',#13967,#18264); +#18264 = DEFINITIONAL_REPRESENTATION('',(#18265),#18269); +#18265 = LINE('',#18266,#18267); +#18266 = CARTESIAN_POINT('',(0.,0.)); +#18267 = VECTOR('',#18268,1.); +#18268 = DIRECTION('',(0.,-1.)); +#18269 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18270 = PCURVE('',#13934,#18271); +#18271 = DEFINITIONAL_REPRESENTATION('',(#18272),#18276); +#18272 = LINE('',#18273,#18274); +#18273 = CARTESIAN_POINT('',(0.35,3.485297375361E-17)); +#18274 = VECTOR('',#18275,1.); +#18275 = DIRECTION('',(0.,-1.)); +#18276 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18277 = ORIENTED_EDGE('',*,*,#14563,.T.); +#18278 = ORIENTED_EDGE('',*,*,#18230,.F.); +#18279 = ORIENTED_EDGE('',*,*,#13946,.F.); +#18280 = ADVANCED_FACE('',(#18281),#13934,.F.); +#18281 = FACE_BOUND('',#18282,.F.); +#18282 = EDGE_LOOP('',(#18283,#18304,#18305,#18306)); +#18283 = ORIENTED_EDGE('',*,*,#18284,.T.); +#18284 = EDGE_CURVE('',#13891,#14518,#18285,.T.); +#18285 = SURFACE_CURVE('',#18286,(#18290,#18297),.PCURVE_S1.); +#18286 = LINE('',#18287,#18288); +#18287 = CARTESIAN_POINT('',(-3.,-4.015,0.2)); +#18288 = VECTOR('',#18289,1.); +#18289 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#18290 = PCURVE('',#13934,#18291); +#18291 = DEFINITIONAL_REPRESENTATION('',(#18292),#18296); +#18292 = LINE('',#18293,#18294); +#18293 = CARTESIAN_POINT('',(0.,0.)); +#18294 = VECTOR('',#18295,1.); +#18295 = DIRECTION('',(0.,-1.)); +#18296 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18297 = PCURVE('',#13906,#18298); +#18298 = DEFINITIONAL_REPRESENTATION('',(#18299),#18303); +#18299 = LINE('',#18300,#18301); +#18300 = CARTESIAN_POINT('',(0.2,0.)); +#18301 = VECTOR('',#18302,1.); +#18302 = DIRECTION('',(0.,-1.)); +#18303 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18304 = ORIENTED_EDGE('',*,*,#14540,.T.); +#18305 = ORIENTED_EDGE('',*,*,#18257,.F.); +#18306 = ORIENTED_EDGE('',*,*,#13918,.F.); +#18307 = ADVANCED_FACE('',(#18308),#13906,.F.); +#18308 = FACE_BOUND('',#18309,.F.); +#18309 = EDGE_LOOP('',(#18310,#18331,#18332,#18333)); +#18310 = ORIENTED_EDGE('',*,*,#18311,.T.); +#18311 = EDGE_CURVE('',#13863,#14495,#18312,.T.); +#18312 = SURFACE_CURVE('',#18313,(#18317,#18324),.PCURVE_S1.); +#18313 = LINE('',#18314,#18315); +#18314 = CARTESIAN_POINT('',(-3.,-4.015,5.551115123126E-17)); +#18315 = VECTOR('',#18316,1.); +#18316 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#18317 = PCURVE('',#13906,#18318); +#18318 = DEFINITIONAL_REPRESENTATION('',(#18319),#18323); +#18319 = LINE('',#18320,#18321); +#18320 = CARTESIAN_POINT('',(0.,0.)); +#18321 = VECTOR('',#18322,1.); +#18322 = DIRECTION('',(0.,-1.)); +#18323 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18324 = PCURVE('',#13878,#18325); +#18325 = DEFINITIONAL_REPRESENTATION('',(#18326),#18330); +#18326 = LINE('',#18327,#18328); +#18327 = CARTESIAN_POINT('',(0.35,-3.485297375361E-17)); +#18328 = VECTOR('',#18329,1.); +#18329 = DIRECTION('',(0.,-1.)); +#18330 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18331 = ORIENTED_EDGE('',*,*,#14517,.T.); +#18332 = ORIENTED_EDGE('',*,*,#18284,.F.); +#18333 = ORIENTED_EDGE('',*,*,#13890,.F.); +#18334 = ADVANCED_FACE('',(#18335),#13878,.F.); +#18335 = FACE_BOUND('',#18336,.F.); +#18336 = EDGE_LOOP('',(#18337,#18358,#18359,#18360)); +#18337 = ORIENTED_EDGE('',*,*,#18338,.T.); +#18338 = EDGE_CURVE('',#13834,#14471,#18339,.T.); +#18339 = SURFACE_CURVE('',#18340,(#18344,#18351),.PCURVE_S1.); +#18340 = LINE('',#18341,#18342); +#18341 = CARTESIAN_POINT('',(-2.65,-4.015,5.551115123126E-17)); +#18342 = VECTOR('',#18343,1.); +#18343 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#18344 = PCURVE('',#13878,#18345); +#18345 = DEFINITIONAL_REPRESENTATION('',(#18346),#18350); +#18346 = LINE('',#18347,#18348); +#18347 = CARTESIAN_POINT('',(0.,0.)); +#18348 = VECTOR('',#18349,1.); +#18349 = DIRECTION('',(0.,-1.)); +#18350 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18351 = PCURVE('',#13850,#18352); +#18352 = DEFINITIONAL_REPRESENTATION('',(#18353),#18357); +#18353 = LINE('',#18354,#18355); +#18354 = CARTESIAN_POINT('',(4.712388980385,0.)); +#18355 = VECTOR('',#18356,1.); +#18356 = DIRECTION('',(0.,-1.)); +#18357 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18358 = ORIENTED_EDGE('',*,*,#14494,.T.); +#18359 = ORIENTED_EDGE('',*,*,#18311,.F.); +#18360 = ORIENTED_EDGE('',*,*,#13862,.F.); +#18361 = ADVANCED_FACE('',(#18362),#13850,.T.); +#18362 = FACE_BOUND('',#18363,.T.); +#18363 = EDGE_LOOP('',(#18364,#18365,#18366,#18367)); +#18364 = ORIENTED_EDGE('',*,*,#13833,.T.); +#18365 = ORIENTED_EDGE('',*,*,#18338,.T.); +#18366 = ORIENTED_EDGE('',*,*,#14470,.F.); +#18367 = ORIENTED_EDGE('',*,*,#18368,.F.); +#18368 = EDGE_CURVE('',#13806,#14448,#18369,.T.); +#18369 = SURFACE_CURVE('',#18370,(#18374,#18381),.PCURVE_S1.); +#18370 = LINE('',#18371,#18372); +#18371 = CARTESIAN_POINT('',(-2.35,-4.015,0.3)); +#18372 = VECTOR('',#18373,1.); +#18373 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#18374 = PCURVE('',#13850,#18375); +#18375 = DEFINITIONAL_REPRESENTATION('',(#18376),#18380); +#18376 = LINE('',#18377,#18378); +#18377 = CARTESIAN_POINT('',(6.28318530718,0.)); +#18378 = VECTOR('',#18379,1.); +#18379 = DIRECTION('',(0.,-1.)); +#18380 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18381 = PCURVE('',#13821,#18382); +#18382 = DEFINITIONAL_REPRESENTATION('',(#18383),#18387); +#18383 = LINE('',#18384,#18385); +#18384 = CARTESIAN_POINT('',(0.425,-4.422237021472E-32)); +#18385 = VECTOR('',#18386,1.); +#18386 = DIRECTION('',(6.767833676919E-44,-1.)); +#18387 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18388 = ADVANCED_FACE('',(#18389),#13821,.F.); +#18389 = FACE_BOUND('',#18390,.F.); +#18390 = EDGE_LOOP('',(#18391,#18392,#18393,#18394)); +#18391 = ORIENTED_EDGE('',*,*,#14419,.T.); +#18392 = ORIENTED_EDGE('',*,*,#14447,.T.); +#18393 = ORIENTED_EDGE('',*,*,#18368,.F.); +#18394 = ORIENTED_EDGE('',*,*,#13805,.F.); +#18395 = ADVANCED_FACE('',(#18396),#14309,.T.); +#18396 = FACE_BOUND('',#18397,.T.); +#18397 = EDGE_LOOP('',(#18398,#18399,#18400,#18401)); +#18398 = ORIENTED_EDGE('',*,*,#14859,.T.); +#18399 = ORIENTED_EDGE('',*,*,#18055,.T.); +#18400 = ORIENTED_EDGE('',*,*,#14292,.F.); +#18401 = ORIENTED_EDGE('',*,*,#18402,.F.); +#18402 = EDGE_CURVE('',#14837,#14265,#18403,.T.); +#18403 = SURFACE_CURVE('',#18404,(#18408,#18415),.PCURVE_S1.); +#18404 = LINE('',#18405,#18406); +#18405 = CARTESIAN_POINT('',(-2.55,3.605,0.725)); +#18406 = VECTOR('',#18407,1.); +#18407 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#18408 = PCURVE('',#14309,#18409); +#18409 = DEFINITIONAL_REPRESENTATION('',(#18410),#18414); +#18410 = LINE('',#18411,#18412); +#18411 = CARTESIAN_POINT('',(6.28318530718,0.)); +#18412 = VECTOR('',#18413,1.); +#18413 = DIRECTION('',(0.,-1.)); +#18414 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18415 = PCURVE('',#14280,#18416); +#18416 = DEFINITIONAL_REPRESENTATION('',(#18417),#18421); +#18417 = LINE('',#18418,#18419); +#18418 = CARTESIAN_POINT('',(0.425,0.)); +#18419 = VECTOR('',#18420,1.); +#18420 = DIRECTION('',(0.,-1.)); +#18421 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18422 = ADVANCED_FACE('',(#18423),#14280,.F.); +#18423 = FACE_BOUND('',#18424,.F.); +#18424 = EDGE_LOOP('',(#18425,#18446,#18447,#18448)); +#18425 = ORIENTED_EDGE('',*,*,#18426,.T.); +#18426 = EDGE_CURVE('',#14809,#14232,#18427,.T.); +#18427 = SURFACE_CURVE('',#18428,(#18432,#18439),.PCURVE_S1.); +#18428 = LINE('',#18429,#18430); +#18429 = CARTESIAN_POINT('',(-2.55,3.605,0.3)); +#18430 = VECTOR('',#18431,1.); +#18431 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#18432 = PCURVE('',#14280,#18433); +#18433 = DEFINITIONAL_REPRESENTATION('',(#18434),#18438); +#18434 = LINE('',#18435,#18436); +#18435 = CARTESIAN_POINT('',(0.,0.)); +#18436 = VECTOR('',#18437,1.); +#18437 = DIRECTION('',(0.,-1.)); +#18438 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18439 = PCURVE('',#14252,#18440); +#18440 = DEFINITIONAL_REPRESENTATION('',(#18441),#18445); +#18441 = LINE('',#18442,#18443); +#18442 = CARTESIAN_POINT('',(1.570796326795,0.)); +#18443 = VECTOR('',#18444,1.); +#18444 = DIRECTION('',(0.,-1.)); +#18445 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18446 = ORIENTED_EDGE('',*,*,#14264,.T.); +#18447 = ORIENTED_EDGE('',*,*,#18402,.F.); +#18448 = ORIENTED_EDGE('',*,*,#14836,.F.); +#18449 = ADVANCED_FACE('',(#18450),#14252,.F.); +#18450 = FACE_BOUND('',#18451,.F.); +#18451 = EDGE_LOOP('',(#18452,#18473,#18474,#18475)); +#18452 = ORIENTED_EDGE('',*,*,#18453,.T.); +#18453 = EDGE_CURVE('',#14786,#14204,#18454,.T.); +#18454 = SURFACE_CURVE('',#18455,(#18459,#18466),.PCURVE_S1.); +#18455 = LINE('',#18456,#18457); +#18456 = CARTESIAN_POINT('',(-2.65,3.605,0.2)); +#18457 = VECTOR('',#18458,1.); +#18458 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#18459 = PCURVE('',#14252,#18460); +#18460 = DEFINITIONAL_REPRESENTATION('',(#18461),#18465); +#18461 = LINE('',#18462,#18463); +#18462 = CARTESIAN_POINT('',(0.,0.)); +#18463 = VECTOR('',#18464,1.); +#18464 = DIRECTION('',(0.,-1.)); +#18465 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18466 = PCURVE('',#14219,#18467); +#18467 = DEFINITIONAL_REPRESENTATION('',(#18468),#18472); +#18468 = LINE('',#18469,#18470); +#18469 = CARTESIAN_POINT('',(0.35,3.485297375361E-17)); +#18470 = VECTOR('',#18471,1.); +#18471 = DIRECTION('',(0.,-1.)); +#18472 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18473 = ORIENTED_EDGE('',*,*,#14231,.T.); +#18474 = ORIENTED_EDGE('',*,*,#18426,.F.); +#18475 = ORIENTED_EDGE('',*,*,#14808,.F.); +#18476 = ADVANCED_FACE('',(#18477),#14219,.F.); +#18477 = FACE_BOUND('',#18478,.F.); +#18478 = EDGE_LOOP('',(#18479,#18500,#18501,#18502)); +#18479 = ORIENTED_EDGE('',*,*,#18480,.T.); +#18480 = EDGE_CURVE('',#14763,#14176,#18481,.T.); +#18481 = SURFACE_CURVE('',#18482,(#18486,#18493),.PCURVE_S1.); +#18482 = LINE('',#18483,#18484); +#18483 = CARTESIAN_POINT('',(-3.,3.605,0.2)); +#18484 = VECTOR('',#18485,1.); +#18485 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#18486 = PCURVE('',#14219,#18487); +#18487 = DEFINITIONAL_REPRESENTATION('',(#18488),#18492); +#18488 = LINE('',#18489,#18490); +#18489 = CARTESIAN_POINT('',(0.,0.)); +#18490 = VECTOR('',#18491,1.); +#18491 = DIRECTION('',(0.,-1.)); +#18492 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18493 = PCURVE('',#14191,#18494); +#18494 = DEFINITIONAL_REPRESENTATION('',(#18495),#18499); +#18495 = LINE('',#18496,#18497); +#18496 = CARTESIAN_POINT('',(0.2,0.)); +#18497 = VECTOR('',#18498,1.); +#18498 = DIRECTION('',(0.,-1.)); +#18499 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18500 = ORIENTED_EDGE('',*,*,#14203,.T.); +#18501 = ORIENTED_EDGE('',*,*,#18453,.F.); +#18502 = ORIENTED_EDGE('',*,*,#14785,.F.); +#18503 = ADVANCED_FACE('',(#18504),#14191,.F.); +#18504 = FACE_BOUND('',#18505,.F.); +#18505 = EDGE_LOOP('',(#18506,#18527,#18528,#18529)); +#18506 = ORIENTED_EDGE('',*,*,#18507,.T.); +#18507 = EDGE_CURVE('',#14740,#14148,#18508,.T.); +#18508 = SURFACE_CURVE('',#18509,(#18513,#18520),.PCURVE_S1.); +#18509 = LINE('',#18510,#18511); +#18510 = CARTESIAN_POINT('',(-3.,3.605,5.551115123126E-17)); +#18511 = VECTOR('',#18512,1.); +#18512 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#18513 = PCURVE('',#14191,#18514); +#18514 = DEFINITIONAL_REPRESENTATION('',(#18515),#18519); +#18515 = LINE('',#18516,#18517); +#18516 = CARTESIAN_POINT('',(0.,0.)); +#18517 = VECTOR('',#18518,1.); +#18518 = DIRECTION('',(0.,-1.)); +#18519 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18520 = PCURVE('',#14163,#18521); +#18521 = DEFINITIONAL_REPRESENTATION('',(#18522),#18526); +#18522 = LINE('',#18523,#18524); +#18523 = CARTESIAN_POINT('',(0.35,-3.485297375361E-17)); +#18524 = VECTOR('',#18525,1.); +#18525 = DIRECTION('',(0.,-1.)); +#18526 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18527 = ORIENTED_EDGE('',*,*,#14175,.T.); +#18528 = ORIENTED_EDGE('',*,*,#18480,.F.); +#18529 = ORIENTED_EDGE('',*,*,#14762,.F.); +#18530 = ADVANCED_FACE('',(#18531),#14163,.F.); +#18531 = FACE_BOUND('',#18532,.F.); +#18532 = EDGE_LOOP('',(#18533,#18554,#18555,#18556)); +#18533 = ORIENTED_EDGE('',*,*,#18534,.T.); +#18534 = EDGE_CURVE('',#14716,#14119,#18535,.T.); +#18535 = SURFACE_CURVE('',#18536,(#18540,#18547),.PCURVE_S1.); +#18536 = LINE('',#18537,#18538); +#18537 = CARTESIAN_POINT('',(-2.65,3.605,5.551115123126E-17)); +#18538 = VECTOR('',#18539,1.); +#18539 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#18540 = PCURVE('',#14163,#18541); +#18541 = DEFINITIONAL_REPRESENTATION('',(#18542),#18546); +#18542 = LINE('',#18543,#18544); +#18543 = CARTESIAN_POINT('',(0.,0.)); +#18544 = VECTOR('',#18545,1.); +#18545 = DIRECTION('',(0.,-1.)); +#18546 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18547 = PCURVE('',#14135,#18548); +#18548 = DEFINITIONAL_REPRESENTATION('',(#18549),#18553); +#18549 = LINE('',#18550,#18551); +#18550 = CARTESIAN_POINT('',(4.712388980385,0.)); +#18551 = VECTOR('',#18552,1.); +#18552 = DIRECTION('',(0.,-1.)); +#18553 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18554 = ORIENTED_EDGE('',*,*,#14147,.T.); +#18555 = ORIENTED_EDGE('',*,*,#18507,.F.); +#18556 = ORIENTED_EDGE('',*,*,#14739,.F.); +#18557 = ADVANCED_FACE('',(#18558),#14135,.T.); +#18558 = FACE_BOUND('',#18559,.T.); +#18559 = EDGE_LOOP('',(#18560,#18561,#18562,#18563)); +#18560 = ORIENTED_EDGE('',*,*,#14715,.T.); +#18561 = ORIENTED_EDGE('',*,*,#18534,.T.); +#18562 = ORIENTED_EDGE('',*,*,#14118,.F.); +#18563 = ORIENTED_EDGE('',*,*,#18564,.F.); +#18564 = EDGE_CURVE('',#14693,#14091,#18565,.T.); +#18565 = SURFACE_CURVE('',#18566,(#18570,#18577),.PCURVE_S1.); +#18566 = LINE('',#18567,#18568); +#18567 = CARTESIAN_POINT('',(-2.35,3.605,0.3)); +#18568 = VECTOR('',#18569,1.); +#18569 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#18570 = PCURVE('',#14135,#18571); +#18571 = DEFINITIONAL_REPRESENTATION('',(#18572),#18576); +#18572 = LINE('',#18573,#18574); +#18573 = CARTESIAN_POINT('',(6.28318530718,0.)); +#18574 = VECTOR('',#18575,1.); +#18575 = DIRECTION('',(0.,-1.)); +#18576 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18577 = PCURVE('',#14106,#18578); +#18578 = DEFINITIONAL_REPRESENTATION('',(#18579),#18583); +#18579 = LINE('',#18580,#18581); +#18580 = CARTESIAN_POINT('',(0.425,-4.422237021472E-32)); +#18581 = VECTOR('',#18582,1.); +#18582 = DIRECTION('',(6.767833676919E-44,-1.)); +#18583 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18584 = ADVANCED_FACE('',(#18585),#14106,.F.); +#18585 = FACE_BOUND('',#18586,.F.); +#18586 = EDGE_LOOP('',(#18587,#18588,#18589,#18590)); +#18587 = ORIENTED_EDGE('',*,*,#14909,.T.); +#18588 = ORIENTED_EDGE('',*,*,#14090,.T.); +#18589 = ORIENTED_EDGE('',*,*,#18564,.F.); +#18590 = ORIENTED_EDGE('',*,*,#14692,.F.); +#18591 = ADVANCED_FACE('',(#18592),#15228,.T.); +#18592 = FACE_BOUND('',#18593,.T.); +#18593 = EDGE_LOOP('',(#18594,#18595,#18596,#18597)); +#18594 = ORIENTED_EDGE('',*,*,#15211,.T.); +#18595 = ORIENTED_EDGE('',*,*,#18026,.T.); +#18596 = ORIENTED_EDGE('',*,*,#15818,.F.); +#18597 = ORIENTED_EDGE('',*,*,#18598,.F.); +#18598 = EDGE_CURVE('',#15184,#15796,#18599,.T.); +#18599 = SURFACE_CURVE('',#18600,(#18604,#18611),.PCURVE_S1.); +#18600 = LINE('',#18601,#18602); +#18601 = CARTESIAN_POINT('',(-2.55,-2.745,0.725)); +#18602 = VECTOR('',#18603,1.); +#18603 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#18604 = PCURVE('',#15228,#18605); +#18605 = DEFINITIONAL_REPRESENTATION('',(#18606),#18610); +#18606 = LINE('',#18607,#18608); +#18607 = CARTESIAN_POINT('',(6.28318530718,0.)); +#18608 = VECTOR('',#18609,1.); +#18609 = DIRECTION('',(0.,-1.)); +#18610 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18611 = PCURVE('',#15199,#18612); +#18612 = DEFINITIONAL_REPRESENTATION('',(#18613),#18617); +#18613 = LINE('',#18614,#18615); +#18614 = CARTESIAN_POINT('',(0.425,0.)); +#18615 = VECTOR('',#18616,1.); +#18616 = DIRECTION('',(0.,-1.)); +#18617 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18618 = ADVANCED_FACE('',(#18619),#15199,.F.); +#18619 = FACE_BOUND('',#18620,.F.); +#18620 = EDGE_LOOP('',(#18621,#18642,#18643,#18644)); +#18621 = ORIENTED_EDGE('',*,*,#18622,.T.); +#18622 = EDGE_CURVE('',#15151,#15768,#18623,.T.); +#18623 = SURFACE_CURVE('',#18624,(#18628,#18635),.PCURVE_S1.); +#18624 = LINE('',#18625,#18626); +#18625 = CARTESIAN_POINT('',(-2.55,-2.745,0.3)); +#18626 = VECTOR('',#18627,1.); +#18627 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#18628 = PCURVE('',#15199,#18629); +#18629 = DEFINITIONAL_REPRESENTATION('',(#18630),#18634); +#18630 = LINE('',#18631,#18632); +#18631 = CARTESIAN_POINT('',(0.,0.)); +#18632 = VECTOR('',#18633,1.); +#18633 = DIRECTION('',(0.,-1.)); +#18634 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18635 = PCURVE('',#15171,#18636); +#18636 = DEFINITIONAL_REPRESENTATION('',(#18637),#18641); +#18637 = LINE('',#18638,#18639); +#18638 = CARTESIAN_POINT('',(1.570796326795,0.)); +#18639 = VECTOR('',#18640,1.); +#18640 = DIRECTION('',(0.,-1.)); +#18641 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18642 = ORIENTED_EDGE('',*,*,#15795,.T.); +#18643 = ORIENTED_EDGE('',*,*,#18598,.F.); +#18644 = ORIENTED_EDGE('',*,*,#15183,.F.); +#18645 = ADVANCED_FACE('',(#18646),#15171,.F.); +#18646 = FACE_BOUND('',#18647,.F.); +#18647 = EDGE_LOOP('',(#18648,#18669,#18670,#18671)); +#18648 = ORIENTED_EDGE('',*,*,#18649,.T.); +#18649 = EDGE_CURVE('',#15123,#15745,#18650,.T.); +#18650 = SURFACE_CURVE('',#18651,(#18655,#18662),.PCURVE_S1.); +#18651 = LINE('',#18652,#18653); +#18652 = CARTESIAN_POINT('',(-2.65,-2.745,0.2)); +#18653 = VECTOR('',#18654,1.); +#18654 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#18655 = PCURVE('',#15171,#18656); +#18656 = DEFINITIONAL_REPRESENTATION('',(#18657),#18661); +#18657 = LINE('',#18658,#18659); +#18658 = CARTESIAN_POINT('',(0.,0.)); +#18659 = VECTOR('',#18660,1.); +#18660 = DIRECTION('',(0.,-1.)); +#18661 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18662 = PCURVE('',#15138,#18663); +#18663 = DEFINITIONAL_REPRESENTATION('',(#18664),#18668); +#18664 = LINE('',#18665,#18666); +#18665 = CARTESIAN_POINT('',(0.35,3.485297375361E-17)); +#18666 = VECTOR('',#18667,1.); +#18667 = DIRECTION('',(0.,-1.)); +#18668 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18669 = ORIENTED_EDGE('',*,*,#15767,.T.); +#18670 = ORIENTED_EDGE('',*,*,#18622,.F.); +#18671 = ORIENTED_EDGE('',*,*,#15150,.F.); +#18672 = ADVANCED_FACE('',(#18673),#15138,.F.); +#18673 = FACE_BOUND('',#18674,.F.); +#18674 = EDGE_LOOP('',(#18675,#18696,#18697,#18698)); +#18675 = ORIENTED_EDGE('',*,*,#18676,.T.); +#18676 = EDGE_CURVE('',#15095,#15722,#18677,.T.); +#18677 = SURFACE_CURVE('',#18678,(#18682,#18689),.PCURVE_S1.); +#18678 = LINE('',#18679,#18680); +#18679 = CARTESIAN_POINT('',(-3.,-2.745,0.2)); +#18680 = VECTOR('',#18681,1.); +#18681 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#18682 = PCURVE('',#15138,#18683); +#18683 = DEFINITIONAL_REPRESENTATION('',(#18684),#18688); +#18684 = LINE('',#18685,#18686); +#18685 = CARTESIAN_POINT('',(0.,0.)); +#18686 = VECTOR('',#18687,1.); +#18687 = DIRECTION('',(0.,-1.)); +#18688 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18689 = PCURVE('',#15110,#18690); +#18690 = DEFINITIONAL_REPRESENTATION('',(#18691),#18695); +#18691 = LINE('',#18692,#18693); +#18692 = CARTESIAN_POINT('',(0.2,0.)); +#18693 = VECTOR('',#18694,1.); +#18694 = DIRECTION('',(0.,-1.)); +#18695 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18696 = ORIENTED_EDGE('',*,*,#15744,.T.); +#18697 = ORIENTED_EDGE('',*,*,#18649,.F.); +#18698 = ORIENTED_EDGE('',*,*,#15122,.F.); +#18699 = ADVANCED_FACE('',(#18700),#15110,.F.); +#18700 = FACE_BOUND('',#18701,.F.); +#18701 = EDGE_LOOP('',(#18702,#18723,#18724,#18725)); +#18702 = ORIENTED_EDGE('',*,*,#18703,.T.); +#18703 = EDGE_CURVE('',#15067,#15699,#18704,.T.); +#18704 = SURFACE_CURVE('',#18705,(#18709,#18716),.PCURVE_S1.); +#18705 = LINE('',#18706,#18707); +#18706 = CARTESIAN_POINT('',(-3.,-2.745,5.551115123126E-17)); +#18707 = VECTOR('',#18708,1.); +#18708 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#18709 = PCURVE('',#15110,#18710); +#18710 = DEFINITIONAL_REPRESENTATION('',(#18711),#18715); +#18711 = LINE('',#18712,#18713); +#18712 = CARTESIAN_POINT('',(0.,0.)); +#18713 = VECTOR('',#18714,1.); +#18714 = DIRECTION('',(0.,-1.)); +#18715 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18716 = PCURVE('',#15082,#18717); +#18717 = DEFINITIONAL_REPRESENTATION('',(#18718),#18722); +#18718 = LINE('',#18719,#18720); +#18719 = CARTESIAN_POINT('',(0.35,-3.485297375361E-17)); +#18720 = VECTOR('',#18721,1.); +#18721 = DIRECTION('',(0.,-1.)); +#18722 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18723 = ORIENTED_EDGE('',*,*,#15721,.T.); +#18724 = ORIENTED_EDGE('',*,*,#18676,.F.); +#18725 = ORIENTED_EDGE('',*,*,#15094,.F.); +#18726 = ADVANCED_FACE('',(#18727),#15082,.F.); +#18727 = FACE_BOUND('',#18728,.F.); +#18728 = EDGE_LOOP('',(#18729,#18750,#18751,#18752)); +#18729 = ORIENTED_EDGE('',*,*,#18730,.T.); +#18730 = EDGE_CURVE('',#15038,#15675,#18731,.T.); +#18731 = SURFACE_CURVE('',#18732,(#18736,#18743),.PCURVE_S1.); +#18732 = LINE('',#18733,#18734); +#18733 = CARTESIAN_POINT('',(-2.65,-2.745,5.551115123126E-17)); +#18734 = VECTOR('',#18735,1.); +#18735 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#18736 = PCURVE('',#15082,#18737); +#18737 = DEFINITIONAL_REPRESENTATION('',(#18738),#18742); +#18738 = LINE('',#18739,#18740); +#18739 = CARTESIAN_POINT('',(0.,0.)); +#18740 = VECTOR('',#18741,1.); +#18741 = DIRECTION('',(0.,-1.)); +#18742 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18743 = PCURVE('',#15054,#18744); +#18744 = DEFINITIONAL_REPRESENTATION('',(#18745),#18749); +#18745 = LINE('',#18746,#18747); +#18746 = CARTESIAN_POINT('',(4.712388980385,0.)); +#18747 = VECTOR('',#18748,1.); +#18748 = DIRECTION('',(0.,-1.)); +#18749 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18750 = ORIENTED_EDGE('',*,*,#15698,.T.); +#18751 = ORIENTED_EDGE('',*,*,#18703,.F.); +#18752 = ORIENTED_EDGE('',*,*,#15066,.F.); +#18753 = ADVANCED_FACE('',(#18754),#15054,.T.); +#18754 = FACE_BOUND('',#18755,.T.); +#18755 = EDGE_LOOP('',(#18756,#18757,#18758,#18759)); +#18756 = ORIENTED_EDGE('',*,*,#15037,.T.); +#18757 = ORIENTED_EDGE('',*,*,#18730,.T.); +#18758 = ORIENTED_EDGE('',*,*,#15674,.F.); +#18759 = ORIENTED_EDGE('',*,*,#18760,.F.); +#18760 = EDGE_CURVE('',#15010,#15652,#18761,.T.); +#18761 = SURFACE_CURVE('',#18762,(#18766,#18773),.PCURVE_S1.); +#18762 = LINE('',#18763,#18764); +#18763 = CARTESIAN_POINT('',(-2.35,-2.745,0.3)); +#18764 = VECTOR('',#18765,1.); +#18765 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#18766 = PCURVE('',#15054,#18767); +#18767 = DEFINITIONAL_REPRESENTATION('',(#18768),#18772); +#18768 = LINE('',#18769,#18770); +#18769 = CARTESIAN_POINT('',(6.28318530718,0.)); +#18770 = VECTOR('',#18771,1.); +#18771 = DIRECTION('',(0.,-1.)); +#18772 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18773 = PCURVE('',#15025,#18774); +#18774 = DEFINITIONAL_REPRESENTATION('',(#18775),#18779); +#18775 = LINE('',#18776,#18777); +#18776 = CARTESIAN_POINT('',(0.425,-4.422237021472E-32)); +#18777 = VECTOR('',#18778,1.); +#18778 = DIRECTION('',(6.767833676919E-44,-1.)); +#18779 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18780 = ADVANCED_FACE('',(#18781),#15025,.F.); +#18781 = FACE_BOUND('',#18782,.F.); +#18782 = EDGE_LOOP('',(#18783,#18784,#18785,#18786)); +#18783 = ORIENTED_EDGE('',*,*,#15623,.T.); +#18784 = ORIENTED_EDGE('',*,*,#15651,.T.); +#18785 = ORIENTED_EDGE('',*,*,#18760,.F.); +#18786 = ORIENTED_EDGE('',*,*,#15009,.F.); +#18787 = ADVANCED_FACE('',(#18788),#15513,.T.); +#18788 = FACE_BOUND('',#18789,.T.); +#18789 = EDGE_LOOP('',(#18790,#18791,#18792,#18793)); +#18790 = ORIENTED_EDGE('',*,*,#16063,.T.); +#18791 = ORIENTED_EDGE('',*,*,#18113,.T.); +#18792 = ORIENTED_EDGE('',*,*,#15496,.F.); +#18793 = ORIENTED_EDGE('',*,*,#18794,.F.); +#18794 = EDGE_CURVE('',#16041,#15469,#18795,.T.); +#18795 = SURFACE_CURVE('',#18796,(#18800,#18807),.PCURVE_S1.); +#18796 = LINE('',#18797,#18798); +#18797 = CARTESIAN_POINT('',(-2.55,2.335,0.725)); +#18798 = VECTOR('',#18799,1.); +#18799 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#18800 = PCURVE('',#15513,#18801); +#18801 = DEFINITIONAL_REPRESENTATION('',(#18802),#18806); +#18802 = LINE('',#18803,#18804); +#18803 = CARTESIAN_POINT('',(6.28318530718,0.)); +#18804 = VECTOR('',#18805,1.); +#18805 = DIRECTION('',(0.,-1.)); +#18806 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18807 = PCURVE('',#15484,#18808); +#18808 = DEFINITIONAL_REPRESENTATION('',(#18809),#18813); +#18809 = LINE('',#18810,#18811); +#18810 = CARTESIAN_POINT('',(0.425,0.)); +#18811 = VECTOR('',#18812,1.); +#18812 = DIRECTION('',(0.,-1.)); +#18813 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18814 = ADVANCED_FACE('',(#18815),#15484,.F.); +#18815 = FACE_BOUND('',#18816,.F.); +#18816 = EDGE_LOOP('',(#18817,#18838,#18839,#18840)); +#18817 = ORIENTED_EDGE('',*,*,#18818,.T.); +#18818 = EDGE_CURVE('',#16013,#15436,#18819,.T.); +#18819 = SURFACE_CURVE('',#18820,(#18824,#18831),.PCURVE_S1.); +#18820 = LINE('',#18821,#18822); +#18821 = CARTESIAN_POINT('',(-2.55,2.335,0.3)); +#18822 = VECTOR('',#18823,1.); +#18823 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#18824 = PCURVE('',#15484,#18825); +#18825 = DEFINITIONAL_REPRESENTATION('',(#18826),#18830); +#18826 = LINE('',#18827,#18828); +#18827 = CARTESIAN_POINT('',(0.,0.)); +#18828 = VECTOR('',#18829,1.); +#18829 = DIRECTION('',(0.,-1.)); +#18830 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18831 = PCURVE('',#15456,#18832); +#18832 = DEFINITIONAL_REPRESENTATION('',(#18833),#18837); +#18833 = LINE('',#18834,#18835); +#18834 = CARTESIAN_POINT('',(1.570796326795,0.)); +#18835 = VECTOR('',#18836,1.); +#18836 = DIRECTION('',(0.,-1.)); +#18837 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18838 = ORIENTED_EDGE('',*,*,#15468,.T.); +#18839 = ORIENTED_EDGE('',*,*,#18794,.F.); +#18840 = ORIENTED_EDGE('',*,*,#16040,.F.); +#18841 = ADVANCED_FACE('',(#18842),#15456,.F.); +#18842 = FACE_BOUND('',#18843,.F.); +#18843 = EDGE_LOOP('',(#18844,#18865,#18866,#18867)); +#18844 = ORIENTED_EDGE('',*,*,#18845,.T.); +#18845 = EDGE_CURVE('',#15990,#15408,#18846,.T.); +#18846 = SURFACE_CURVE('',#18847,(#18851,#18858),.PCURVE_S1.); +#18847 = LINE('',#18848,#18849); +#18848 = CARTESIAN_POINT('',(-2.65,2.335,0.2)); +#18849 = VECTOR('',#18850,1.); +#18850 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#18851 = PCURVE('',#15456,#18852); +#18852 = DEFINITIONAL_REPRESENTATION('',(#18853),#18857); +#18853 = LINE('',#18854,#18855); +#18854 = CARTESIAN_POINT('',(0.,0.)); +#18855 = VECTOR('',#18856,1.); +#18856 = DIRECTION('',(0.,-1.)); +#18857 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18858 = PCURVE('',#15423,#18859); +#18859 = DEFINITIONAL_REPRESENTATION('',(#18860),#18864); +#18860 = LINE('',#18861,#18862); +#18861 = CARTESIAN_POINT('',(0.35,3.485297375361E-17)); +#18862 = VECTOR('',#18863,1.); +#18863 = DIRECTION('',(0.,-1.)); +#18864 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18865 = ORIENTED_EDGE('',*,*,#15435,.T.); +#18866 = ORIENTED_EDGE('',*,*,#18818,.F.); +#18867 = ORIENTED_EDGE('',*,*,#16012,.F.); +#18868 = ADVANCED_FACE('',(#18869),#15423,.F.); +#18869 = FACE_BOUND('',#18870,.F.); +#18870 = EDGE_LOOP('',(#18871,#18892,#18893,#18894)); +#18871 = ORIENTED_EDGE('',*,*,#18872,.T.); +#18872 = EDGE_CURVE('',#15967,#15380,#18873,.T.); +#18873 = SURFACE_CURVE('',#18874,(#18878,#18885),.PCURVE_S1.); +#18874 = LINE('',#18875,#18876); +#18875 = CARTESIAN_POINT('',(-3.,2.335,0.2)); +#18876 = VECTOR('',#18877,1.); +#18877 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#18878 = PCURVE('',#15423,#18879); +#18879 = DEFINITIONAL_REPRESENTATION('',(#18880),#18884); +#18880 = LINE('',#18881,#18882); +#18881 = CARTESIAN_POINT('',(0.,0.)); +#18882 = VECTOR('',#18883,1.); +#18883 = DIRECTION('',(0.,-1.)); +#18884 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18885 = PCURVE('',#15395,#18886); +#18886 = DEFINITIONAL_REPRESENTATION('',(#18887),#18891); +#18887 = LINE('',#18888,#18889); +#18888 = CARTESIAN_POINT('',(0.2,0.)); +#18889 = VECTOR('',#18890,1.); +#18890 = DIRECTION('',(0.,-1.)); +#18891 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18892 = ORIENTED_EDGE('',*,*,#15407,.T.); +#18893 = ORIENTED_EDGE('',*,*,#18845,.F.); +#18894 = ORIENTED_EDGE('',*,*,#15989,.F.); +#18895 = ADVANCED_FACE('',(#18896),#15395,.F.); +#18896 = FACE_BOUND('',#18897,.F.); +#18897 = EDGE_LOOP('',(#18898,#18919,#18920,#18921)); +#18898 = ORIENTED_EDGE('',*,*,#18899,.T.); +#18899 = EDGE_CURVE('',#15944,#15352,#18900,.T.); +#18900 = SURFACE_CURVE('',#18901,(#18905,#18912),.PCURVE_S1.); +#18901 = LINE('',#18902,#18903); +#18902 = CARTESIAN_POINT('',(-3.,2.335,5.551115123126E-17)); +#18903 = VECTOR('',#18904,1.); +#18904 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#18905 = PCURVE('',#15395,#18906); +#18906 = DEFINITIONAL_REPRESENTATION('',(#18907),#18911); +#18907 = LINE('',#18908,#18909); +#18908 = CARTESIAN_POINT('',(0.,0.)); +#18909 = VECTOR('',#18910,1.); +#18910 = DIRECTION('',(0.,-1.)); +#18911 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18912 = PCURVE('',#15367,#18913); +#18913 = DEFINITIONAL_REPRESENTATION('',(#18914),#18918); +#18914 = LINE('',#18915,#18916); +#18915 = CARTESIAN_POINT('',(0.35,-3.485297375361E-17)); +#18916 = VECTOR('',#18917,1.); +#18917 = DIRECTION('',(0.,-1.)); +#18918 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18919 = ORIENTED_EDGE('',*,*,#15379,.T.); +#18920 = ORIENTED_EDGE('',*,*,#18872,.F.); +#18921 = ORIENTED_EDGE('',*,*,#15966,.F.); +#18922 = ADVANCED_FACE('',(#18923),#15367,.F.); +#18923 = FACE_BOUND('',#18924,.F.); +#18924 = EDGE_LOOP('',(#18925,#18946,#18947,#18948)); +#18925 = ORIENTED_EDGE('',*,*,#18926,.T.); +#18926 = EDGE_CURVE('',#15920,#15323,#18927,.T.); +#18927 = SURFACE_CURVE('',#18928,(#18932,#18939),.PCURVE_S1.); +#18928 = LINE('',#18929,#18930); +#18929 = CARTESIAN_POINT('',(-2.65,2.335,5.551115123126E-17)); +#18930 = VECTOR('',#18931,1.); +#18931 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#18932 = PCURVE('',#15367,#18933); +#18933 = DEFINITIONAL_REPRESENTATION('',(#18934),#18938); +#18934 = LINE('',#18935,#18936); +#18935 = CARTESIAN_POINT('',(0.,0.)); +#18936 = VECTOR('',#18937,1.); +#18937 = DIRECTION('',(0.,-1.)); +#18938 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18939 = PCURVE('',#15339,#18940); +#18940 = DEFINITIONAL_REPRESENTATION('',(#18941),#18945); +#18941 = LINE('',#18942,#18943); +#18942 = CARTESIAN_POINT('',(4.712388980385,0.)); +#18943 = VECTOR('',#18944,1.); +#18944 = DIRECTION('',(0.,-1.)); +#18945 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18946 = ORIENTED_EDGE('',*,*,#15351,.T.); +#18947 = ORIENTED_EDGE('',*,*,#18899,.F.); +#18948 = ORIENTED_EDGE('',*,*,#15943,.F.); +#18949 = ADVANCED_FACE('',(#18950),#15339,.T.); +#18950 = FACE_BOUND('',#18951,.T.); +#18951 = EDGE_LOOP('',(#18952,#18953,#18954,#18955)); +#18952 = ORIENTED_EDGE('',*,*,#15919,.T.); +#18953 = ORIENTED_EDGE('',*,*,#18926,.T.); +#18954 = ORIENTED_EDGE('',*,*,#15322,.F.); +#18955 = ORIENTED_EDGE('',*,*,#18956,.F.); +#18956 = EDGE_CURVE('',#15897,#15295,#18957,.T.); +#18957 = SURFACE_CURVE('',#18958,(#18962,#18969),.PCURVE_S1.); +#18958 = LINE('',#18959,#18960); +#18959 = CARTESIAN_POINT('',(-2.35,2.335,0.3)); +#18960 = VECTOR('',#18961,1.); +#18961 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#18962 = PCURVE('',#15339,#18963); +#18963 = DEFINITIONAL_REPRESENTATION('',(#18964),#18968); +#18964 = LINE('',#18965,#18966); +#18965 = CARTESIAN_POINT('',(6.28318530718,0.)); +#18966 = VECTOR('',#18967,1.); +#18967 = DIRECTION('',(0.,-1.)); +#18968 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18969 = PCURVE('',#15310,#18970); +#18970 = DEFINITIONAL_REPRESENTATION('',(#18971),#18975); +#18971 = LINE('',#18972,#18973); +#18972 = CARTESIAN_POINT('',(0.425,-4.422237021472E-32)); +#18973 = VECTOR('',#18974,1.); +#18974 = DIRECTION('',(6.767833676919E-44,-1.)); +#18975 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#18976 = ADVANCED_FACE('',(#18977),#15310,.F.); +#18977 = FACE_BOUND('',#18978,.F.); +#18978 = EDGE_LOOP('',(#18979,#18980,#18981,#18982)); +#18979 = ORIENTED_EDGE('',*,*,#16113,.T.); +#18980 = ORIENTED_EDGE('',*,*,#15294,.T.); +#18981 = ORIENTED_EDGE('',*,*,#18956,.F.); +#18982 = ORIENTED_EDGE('',*,*,#15896,.F.); +#18983 = ADVANCED_FACE('',(#18984),#16432,.T.); +#18984 = FACE_BOUND('',#18985,.T.); +#18985 = EDGE_LOOP('',(#18986,#18987,#18988,#18989)); +#18986 = ORIENTED_EDGE('',*,*,#16415,.T.); +#18987 = ORIENTED_EDGE('',*,*,#18084,.T.); +#18988 = ORIENTED_EDGE('',*,*,#17022,.F.); +#18989 = ORIENTED_EDGE('',*,*,#18990,.F.); +#18990 = EDGE_CURVE('',#16388,#17000,#18991,.T.); +#18991 = SURFACE_CURVE('',#18992,(#18996,#19003),.PCURVE_S1.); +#18992 = LINE('',#18993,#18994); +#18993 = CARTESIAN_POINT('',(-2.55,-1.475,0.725)); +#18994 = VECTOR('',#18995,1.); +#18995 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#18996 = PCURVE('',#16432,#18997); +#18997 = DEFINITIONAL_REPRESENTATION('',(#18998),#19002); +#18998 = LINE('',#18999,#19000); +#18999 = CARTESIAN_POINT('',(6.28318530718,0.)); +#19000 = VECTOR('',#19001,1.); +#19001 = DIRECTION('',(0.,-1.)); +#19002 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19003 = PCURVE('',#16403,#19004); +#19004 = DEFINITIONAL_REPRESENTATION('',(#19005),#19009); +#19005 = LINE('',#19006,#19007); +#19006 = CARTESIAN_POINT('',(0.425,0.)); +#19007 = VECTOR('',#19008,1.); +#19008 = DIRECTION('',(0.,-1.)); +#19009 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19010 = ADVANCED_FACE('',(#19011),#16403,.F.); +#19011 = FACE_BOUND('',#19012,.F.); +#19012 = EDGE_LOOP('',(#19013,#19034,#19035,#19036)); +#19013 = ORIENTED_EDGE('',*,*,#19014,.T.); +#19014 = EDGE_CURVE('',#16355,#16972,#19015,.T.); +#19015 = SURFACE_CURVE('',#19016,(#19020,#19027),.PCURVE_S1.); +#19016 = LINE('',#19017,#19018); +#19017 = CARTESIAN_POINT('',(-2.55,-1.475,0.3)); +#19018 = VECTOR('',#19019,1.); +#19019 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#19020 = PCURVE('',#16403,#19021); +#19021 = DEFINITIONAL_REPRESENTATION('',(#19022),#19026); +#19022 = LINE('',#19023,#19024); +#19023 = CARTESIAN_POINT('',(0.,0.)); +#19024 = VECTOR('',#19025,1.); +#19025 = DIRECTION('',(0.,-1.)); +#19026 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19027 = PCURVE('',#16375,#19028); +#19028 = DEFINITIONAL_REPRESENTATION('',(#19029),#19033); +#19029 = LINE('',#19030,#19031); +#19030 = CARTESIAN_POINT('',(1.570796326795,0.)); +#19031 = VECTOR('',#19032,1.); +#19032 = DIRECTION('',(0.,-1.)); +#19033 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19034 = ORIENTED_EDGE('',*,*,#16999,.T.); +#19035 = ORIENTED_EDGE('',*,*,#18990,.F.); +#19036 = ORIENTED_EDGE('',*,*,#16387,.F.); +#19037 = ADVANCED_FACE('',(#19038),#16375,.F.); +#19038 = FACE_BOUND('',#19039,.F.); +#19039 = EDGE_LOOP('',(#19040,#19061,#19062,#19063)); +#19040 = ORIENTED_EDGE('',*,*,#19041,.T.); +#19041 = EDGE_CURVE('',#16327,#16949,#19042,.T.); +#19042 = SURFACE_CURVE('',#19043,(#19047,#19054),.PCURVE_S1.); +#19043 = LINE('',#19044,#19045); +#19044 = CARTESIAN_POINT('',(-2.65,-1.475,0.2)); +#19045 = VECTOR('',#19046,1.); +#19046 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#19047 = PCURVE('',#16375,#19048); +#19048 = DEFINITIONAL_REPRESENTATION('',(#19049),#19053); +#19049 = LINE('',#19050,#19051); +#19050 = CARTESIAN_POINT('',(0.,0.)); +#19051 = VECTOR('',#19052,1.); +#19052 = DIRECTION('',(0.,-1.)); +#19053 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19054 = PCURVE('',#16342,#19055); +#19055 = DEFINITIONAL_REPRESENTATION('',(#19056),#19060); +#19056 = LINE('',#19057,#19058); +#19057 = CARTESIAN_POINT('',(0.35,3.485297375361E-17)); +#19058 = VECTOR('',#19059,1.); +#19059 = DIRECTION('',(0.,-1.)); +#19060 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19061 = ORIENTED_EDGE('',*,*,#16971,.T.); +#19062 = ORIENTED_EDGE('',*,*,#19014,.F.); +#19063 = ORIENTED_EDGE('',*,*,#16354,.F.); +#19064 = ADVANCED_FACE('',(#19065),#16342,.F.); +#19065 = FACE_BOUND('',#19066,.F.); +#19066 = EDGE_LOOP('',(#19067,#19088,#19089,#19090)); +#19067 = ORIENTED_EDGE('',*,*,#19068,.T.); +#19068 = EDGE_CURVE('',#16299,#16926,#19069,.T.); +#19069 = SURFACE_CURVE('',#19070,(#19074,#19081),.PCURVE_S1.); +#19070 = LINE('',#19071,#19072); +#19071 = CARTESIAN_POINT('',(-3.,-1.475,0.2)); +#19072 = VECTOR('',#19073,1.); +#19073 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#19074 = PCURVE('',#16342,#19075); +#19075 = DEFINITIONAL_REPRESENTATION('',(#19076),#19080); +#19076 = LINE('',#19077,#19078); +#19077 = CARTESIAN_POINT('',(0.,0.)); +#19078 = VECTOR('',#19079,1.); +#19079 = DIRECTION('',(0.,-1.)); +#19080 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19081 = PCURVE('',#16314,#19082); +#19082 = DEFINITIONAL_REPRESENTATION('',(#19083),#19087); +#19083 = LINE('',#19084,#19085); +#19084 = CARTESIAN_POINT('',(0.2,0.)); +#19085 = VECTOR('',#19086,1.); +#19086 = DIRECTION('',(0.,-1.)); +#19087 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19088 = ORIENTED_EDGE('',*,*,#16948,.T.); +#19089 = ORIENTED_EDGE('',*,*,#19041,.F.); +#19090 = ORIENTED_EDGE('',*,*,#16326,.F.); +#19091 = ADVANCED_FACE('',(#19092),#16314,.F.); +#19092 = FACE_BOUND('',#19093,.F.); +#19093 = EDGE_LOOP('',(#19094,#19115,#19116,#19117)); +#19094 = ORIENTED_EDGE('',*,*,#19095,.T.); +#19095 = EDGE_CURVE('',#16271,#16903,#19096,.T.); +#19096 = SURFACE_CURVE('',#19097,(#19101,#19108),.PCURVE_S1.); +#19097 = LINE('',#19098,#19099); +#19098 = CARTESIAN_POINT('',(-3.,-1.475,5.551115123126E-17)); +#19099 = VECTOR('',#19100,1.); +#19100 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#19101 = PCURVE('',#16314,#19102); +#19102 = DEFINITIONAL_REPRESENTATION('',(#19103),#19107); +#19103 = LINE('',#19104,#19105); +#19104 = CARTESIAN_POINT('',(0.,0.)); +#19105 = VECTOR('',#19106,1.); +#19106 = DIRECTION('',(0.,-1.)); +#19107 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19108 = PCURVE('',#16286,#19109); +#19109 = DEFINITIONAL_REPRESENTATION('',(#19110),#19114); +#19110 = LINE('',#19111,#19112); +#19111 = CARTESIAN_POINT('',(0.35,-3.485297375361E-17)); +#19112 = VECTOR('',#19113,1.); +#19113 = DIRECTION('',(0.,-1.)); +#19114 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19115 = ORIENTED_EDGE('',*,*,#16925,.T.); +#19116 = ORIENTED_EDGE('',*,*,#19068,.F.); +#19117 = ORIENTED_EDGE('',*,*,#16298,.F.); +#19118 = ADVANCED_FACE('',(#19119),#16286,.F.); +#19119 = FACE_BOUND('',#19120,.F.); +#19120 = EDGE_LOOP('',(#19121,#19142,#19143,#19144)); +#19121 = ORIENTED_EDGE('',*,*,#19122,.T.); +#19122 = EDGE_CURVE('',#16242,#16879,#19123,.T.); +#19123 = SURFACE_CURVE('',#19124,(#19128,#19135),.PCURVE_S1.); +#19124 = LINE('',#19125,#19126); +#19125 = CARTESIAN_POINT('',(-2.65,-1.475,5.551115123126E-17)); +#19126 = VECTOR('',#19127,1.); +#19127 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#19128 = PCURVE('',#16286,#19129); +#19129 = DEFINITIONAL_REPRESENTATION('',(#19130),#19134); +#19130 = LINE('',#19131,#19132); +#19131 = CARTESIAN_POINT('',(0.,0.)); +#19132 = VECTOR('',#19133,1.); +#19133 = DIRECTION('',(0.,-1.)); +#19134 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19135 = PCURVE('',#16258,#19136); +#19136 = DEFINITIONAL_REPRESENTATION('',(#19137),#19141); +#19137 = LINE('',#19138,#19139); +#19138 = CARTESIAN_POINT('',(4.712388980385,0.)); +#19139 = VECTOR('',#19140,1.); +#19140 = DIRECTION('',(0.,-1.)); +#19141 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19142 = ORIENTED_EDGE('',*,*,#16902,.T.); +#19143 = ORIENTED_EDGE('',*,*,#19095,.F.); +#19144 = ORIENTED_EDGE('',*,*,#16270,.F.); +#19145 = ADVANCED_FACE('',(#19146),#16258,.T.); +#19146 = FACE_BOUND('',#19147,.T.); +#19147 = EDGE_LOOP('',(#19148,#19149,#19150,#19151)); +#19148 = ORIENTED_EDGE('',*,*,#16241,.T.); +#19149 = ORIENTED_EDGE('',*,*,#19122,.T.); +#19150 = ORIENTED_EDGE('',*,*,#16878,.F.); +#19151 = ORIENTED_EDGE('',*,*,#19152,.F.); +#19152 = EDGE_CURVE('',#16214,#16856,#19153,.T.); +#19153 = SURFACE_CURVE('',#19154,(#19158,#19165),.PCURVE_S1.); +#19154 = LINE('',#19155,#19156); +#19155 = CARTESIAN_POINT('',(-2.35,-1.475,0.3)); +#19156 = VECTOR('',#19157,1.); +#19157 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#19158 = PCURVE('',#16258,#19159); +#19159 = DEFINITIONAL_REPRESENTATION('',(#19160),#19164); +#19160 = LINE('',#19161,#19162); +#19161 = CARTESIAN_POINT('',(6.28318530718,0.)); +#19162 = VECTOR('',#19163,1.); +#19163 = DIRECTION('',(0.,-1.)); +#19164 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19165 = PCURVE('',#16229,#19166); +#19166 = DEFINITIONAL_REPRESENTATION('',(#19167),#19171); +#19167 = LINE('',#19168,#19169); +#19168 = CARTESIAN_POINT('',(0.425,-4.422237021472E-32)); +#19169 = VECTOR('',#19170,1.); +#19170 = DIRECTION('',(6.767833676919E-44,-1.)); +#19171 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19172 = ADVANCED_FACE('',(#19173),#16229,.F.); +#19173 = FACE_BOUND('',#19174,.F.); +#19174 = EDGE_LOOP('',(#19175,#19176,#19177,#19178)); +#19175 = ORIENTED_EDGE('',*,*,#16827,.T.); +#19176 = ORIENTED_EDGE('',*,*,#16855,.T.); +#19177 = ORIENTED_EDGE('',*,*,#19152,.F.); +#19178 = ORIENTED_EDGE('',*,*,#16213,.F.); +#19179 = ADVANCED_FACE('',(#19180),#16717,.T.); +#19180 = FACE_BOUND('',#19181,.T.); +#19181 = EDGE_LOOP('',(#19182,#19183,#19184,#19185)); +#19182 = ORIENTED_EDGE('',*,*,#17267,.T.); +#19183 = ORIENTED_EDGE('',*,*,#18171,.T.); +#19184 = ORIENTED_EDGE('',*,*,#16700,.F.); +#19185 = ORIENTED_EDGE('',*,*,#19186,.F.); +#19186 = EDGE_CURVE('',#17245,#16673,#19187,.T.); +#19187 = SURFACE_CURVE('',#19188,(#19192,#19199),.PCURVE_S1.); +#19188 = LINE('',#19189,#19190); +#19189 = CARTESIAN_POINT('',(-2.55,1.065,0.725)); +#19190 = VECTOR('',#19191,1.); +#19191 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#19192 = PCURVE('',#16717,#19193); +#19193 = DEFINITIONAL_REPRESENTATION('',(#19194),#19198); +#19194 = LINE('',#19195,#19196); +#19195 = CARTESIAN_POINT('',(6.28318530718,0.)); +#19196 = VECTOR('',#19197,1.); +#19197 = DIRECTION('',(0.,-1.)); +#19198 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19199 = PCURVE('',#16688,#19200); +#19200 = DEFINITIONAL_REPRESENTATION('',(#19201),#19205); +#19201 = LINE('',#19202,#19203); +#19202 = CARTESIAN_POINT('',(0.425,0.)); +#19203 = VECTOR('',#19204,1.); +#19204 = DIRECTION('',(0.,-1.)); +#19205 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19206 = ADVANCED_FACE('',(#19207),#16688,.F.); +#19207 = FACE_BOUND('',#19208,.F.); +#19208 = EDGE_LOOP('',(#19209,#19230,#19231,#19232)); +#19209 = ORIENTED_EDGE('',*,*,#19210,.T.); +#19210 = EDGE_CURVE('',#17217,#16640,#19211,.T.); +#19211 = SURFACE_CURVE('',#19212,(#19216,#19223),.PCURVE_S1.); +#19212 = LINE('',#19213,#19214); +#19213 = CARTESIAN_POINT('',(-2.55,1.065,0.3)); +#19214 = VECTOR('',#19215,1.); +#19215 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#19216 = PCURVE('',#16688,#19217); +#19217 = DEFINITIONAL_REPRESENTATION('',(#19218),#19222); +#19218 = LINE('',#19219,#19220); +#19219 = CARTESIAN_POINT('',(0.,0.)); +#19220 = VECTOR('',#19221,1.); +#19221 = DIRECTION('',(0.,-1.)); +#19222 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19223 = PCURVE('',#16660,#19224); +#19224 = DEFINITIONAL_REPRESENTATION('',(#19225),#19229); +#19225 = LINE('',#19226,#19227); +#19226 = CARTESIAN_POINT('',(1.570796326795,0.)); +#19227 = VECTOR('',#19228,1.); +#19228 = DIRECTION('',(0.,-1.)); +#19229 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19230 = ORIENTED_EDGE('',*,*,#16672,.T.); +#19231 = ORIENTED_EDGE('',*,*,#19186,.F.); +#19232 = ORIENTED_EDGE('',*,*,#17244,.F.); +#19233 = ADVANCED_FACE('',(#19234),#16660,.F.); +#19234 = FACE_BOUND('',#19235,.F.); +#19235 = EDGE_LOOP('',(#19236,#19257,#19258,#19259)); +#19236 = ORIENTED_EDGE('',*,*,#19237,.T.); +#19237 = EDGE_CURVE('',#17194,#16612,#19238,.T.); +#19238 = SURFACE_CURVE('',#19239,(#19243,#19250),.PCURVE_S1.); +#19239 = LINE('',#19240,#19241); +#19240 = CARTESIAN_POINT('',(-2.65,1.065,0.2)); +#19241 = VECTOR('',#19242,1.); +#19242 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#19243 = PCURVE('',#16660,#19244); +#19244 = DEFINITIONAL_REPRESENTATION('',(#19245),#19249); +#19245 = LINE('',#19246,#19247); +#19246 = CARTESIAN_POINT('',(0.,0.)); +#19247 = VECTOR('',#19248,1.); +#19248 = DIRECTION('',(0.,-1.)); +#19249 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19250 = PCURVE('',#16627,#19251); +#19251 = DEFINITIONAL_REPRESENTATION('',(#19252),#19256); +#19252 = LINE('',#19253,#19254); +#19253 = CARTESIAN_POINT('',(0.35,3.485297375361E-17)); +#19254 = VECTOR('',#19255,1.); +#19255 = DIRECTION('',(0.,-1.)); +#19256 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19257 = ORIENTED_EDGE('',*,*,#16639,.T.); +#19258 = ORIENTED_EDGE('',*,*,#19210,.F.); +#19259 = ORIENTED_EDGE('',*,*,#17216,.F.); +#19260 = ADVANCED_FACE('',(#19261),#16627,.F.); +#19261 = FACE_BOUND('',#19262,.F.); +#19262 = EDGE_LOOP('',(#19263,#19284,#19285,#19286)); +#19263 = ORIENTED_EDGE('',*,*,#19264,.T.); +#19264 = EDGE_CURVE('',#17171,#16584,#19265,.T.); +#19265 = SURFACE_CURVE('',#19266,(#19270,#19277),.PCURVE_S1.); +#19266 = LINE('',#19267,#19268); +#19267 = CARTESIAN_POINT('',(-3.,1.065,0.2)); +#19268 = VECTOR('',#19269,1.); +#19269 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#19270 = PCURVE('',#16627,#19271); +#19271 = DEFINITIONAL_REPRESENTATION('',(#19272),#19276); +#19272 = LINE('',#19273,#19274); +#19273 = CARTESIAN_POINT('',(0.,0.)); +#19274 = VECTOR('',#19275,1.); +#19275 = DIRECTION('',(0.,-1.)); +#19276 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19277 = PCURVE('',#16599,#19278); +#19278 = DEFINITIONAL_REPRESENTATION('',(#19279),#19283); +#19279 = LINE('',#19280,#19281); +#19280 = CARTESIAN_POINT('',(0.2,0.)); +#19281 = VECTOR('',#19282,1.); +#19282 = DIRECTION('',(0.,-1.)); +#19283 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19284 = ORIENTED_EDGE('',*,*,#16611,.T.); +#19285 = ORIENTED_EDGE('',*,*,#19237,.F.); +#19286 = ORIENTED_EDGE('',*,*,#17193,.F.); +#19287 = ADVANCED_FACE('',(#19288),#16599,.F.); +#19288 = FACE_BOUND('',#19289,.F.); +#19289 = EDGE_LOOP('',(#19290,#19311,#19312,#19313)); +#19290 = ORIENTED_EDGE('',*,*,#19291,.T.); +#19291 = EDGE_CURVE('',#17148,#16556,#19292,.T.); +#19292 = SURFACE_CURVE('',#19293,(#19297,#19304),.PCURVE_S1.); +#19293 = LINE('',#19294,#19295); +#19294 = CARTESIAN_POINT('',(-3.,1.065,5.551115123126E-17)); +#19295 = VECTOR('',#19296,1.); +#19296 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#19297 = PCURVE('',#16599,#19298); +#19298 = DEFINITIONAL_REPRESENTATION('',(#19299),#19303); +#19299 = LINE('',#19300,#19301); +#19300 = CARTESIAN_POINT('',(0.,0.)); +#19301 = VECTOR('',#19302,1.); +#19302 = DIRECTION('',(0.,-1.)); +#19303 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19304 = PCURVE('',#16571,#19305); +#19305 = DEFINITIONAL_REPRESENTATION('',(#19306),#19310); +#19306 = LINE('',#19307,#19308); +#19307 = CARTESIAN_POINT('',(0.35,-3.485297375361E-17)); +#19308 = VECTOR('',#19309,1.); +#19309 = DIRECTION('',(0.,-1.)); +#19310 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19311 = ORIENTED_EDGE('',*,*,#16583,.T.); +#19312 = ORIENTED_EDGE('',*,*,#19264,.F.); +#19313 = ORIENTED_EDGE('',*,*,#17170,.F.); +#19314 = ADVANCED_FACE('',(#19315),#16571,.F.); +#19315 = FACE_BOUND('',#19316,.F.); +#19316 = EDGE_LOOP('',(#19317,#19338,#19339,#19340)); +#19317 = ORIENTED_EDGE('',*,*,#19318,.T.); +#19318 = EDGE_CURVE('',#17124,#16527,#19319,.T.); +#19319 = SURFACE_CURVE('',#19320,(#19324,#19331),.PCURVE_S1.); +#19320 = LINE('',#19321,#19322); +#19321 = CARTESIAN_POINT('',(-2.65,1.065,5.551115123126E-17)); +#19322 = VECTOR('',#19323,1.); +#19323 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#19324 = PCURVE('',#16571,#19325); +#19325 = DEFINITIONAL_REPRESENTATION('',(#19326),#19330); +#19326 = LINE('',#19327,#19328); +#19327 = CARTESIAN_POINT('',(0.,0.)); +#19328 = VECTOR('',#19329,1.); +#19329 = DIRECTION('',(0.,-1.)); +#19330 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19331 = PCURVE('',#16543,#19332); +#19332 = DEFINITIONAL_REPRESENTATION('',(#19333),#19337); +#19333 = LINE('',#19334,#19335); +#19334 = CARTESIAN_POINT('',(4.712388980385,0.)); +#19335 = VECTOR('',#19336,1.); +#19336 = DIRECTION('',(0.,-1.)); +#19337 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19338 = ORIENTED_EDGE('',*,*,#16555,.T.); +#19339 = ORIENTED_EDGE('',*,*,#19291,.F.); +#19340 = ORIENTED_EDGE('',*,*,#17147,.F.); +#19341 = ADVANCED_FACE('',(#19342),#16543,.T.); +#19342 = FACE_BOUND('',#19343,.T.); +#19343 = EDGE_LOOP('',(#19344,#19345,#19346,#19347)); +#19344 = ORIENTED_EDGE('',*,*,#17123,.T.); +#19345 = ORIENTED_EDGE('',*,*,#19318,.T.); +#19346 = ORIENTED_EDGE('',*,*,#16526,.F.); +#19347 = ORIENTED_EDGE('',*,*,#19348,.F.); +#19348 = EDGE_CURVE('',#17101,#16499,#19349,.T.); +#19349 = SURFACE_CURVE('',#19350,(#19354,#19361),.PCURVE_S1.); +#19350 = LINE('',#19351,#19352); +#19351 = CARTESIAN_POINT('',(-2.35,1.065,0.3)); +#19352 = VECTOR('',#19353,1.); +#19353 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#19354 = PCURVE('',#16543,#19355); +#19355 = DEFINITIONAL_REPRESENTATION('',(#19356),#19360); +#19356 = LINE('',#19357,#19358); +#19357 = CARTESIAN_POINT('',(6.28318530718,0.)); +#19358 = VECTOR('',#19359,1.); +#19359 = DIRECTION('',(0.,-1.)); +#19360 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19361 = PCURVE('',#16514,#19362); +#19362 = DEFINITIONAL_REPRESENTATION('',(#19363),#19367); +#19363 = LINE('',#19364,#19365); +#19364 = CARTESIAN_POINT('',(0.425,-4.422237021472E-32)); +#19365 = VECTOR('',#19366,1.); +#19366 = DIRECTION('',(6.767833676919E-44,-1.)); +#19367 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19368 = ADVANCED_FACE('',(#19369),#16514,.F.); +#19369 = FACE_BOUND('',#19370,.F.); +#19370 = EDGE_LOOP('',(#19371,#19372,#19373,#19374)); +#19371 = ORIENTED_EDGE('',*,*,#17317,.T.); +#19372 = ORIENTED_EDGE('',*,*,#16498,.T.); +#19373 = ORIENTED_EDGE('',*,*,#19348,.F.); +#19374 = ORIENTED_EDGE('',*,*,#17100,.F.); +#19375 = ADVANCED_FACE('',(#19376),#17636,.T.); +#19376 = FACE_BOUND('',#19377,.T.); +#19377 = EDGE_LOOP('',(#19378,#19379,#19380,#19381)); +#19378 = ORIENTED_EDGE('',*,*,#17619,.T.); +#19379 = ORIENTED_EDGE('',*,*,#18142,.T.); +#19380 = ORIENTED_EDGE('',*,*,#17869,.F.); +#19381 = ORIENTED_EDGE('',*,*,#19382,.F.); +#19382 = EDGE_CURVE('',#17592,#17847,#19383,.T.); +#19383 = SURFACE_CURVE('',#19384,(#19388,#19395),.PCURVE_S1.); +#19384 = LINE('',#19385,#19386); +#19385 = CARTESIAN_POINT('',(-2.55,-0.205,0.725)); +#19386 = VECTOR('',#19387,1.); +#19387 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#19388 = PCURVE('',#17636,#19389); +#19389 = DEFINITIONAL_REPRESENTATION('',(#19390),#19394); +#19390 = LINE('',#19391,#19392); +#19391 = CARTESIAN_POINT('',(6.28318530718,-2.775557561563E-17)); +#19392 = VECTOR('',#19393,1.); +#19393 = DIRECTION('',(0.,-1.)); +#19394 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19395 = PCURVE('',#17607,#19396); +#19396 = DEFINITIONAL_REPRESENTATION('',(#19397),#19401); +#19397 = LINE('',#19398,#19399); +#19398 = CARTESIAN_POINT('',(0.425,0.)); +#19399 = VECTOR('',#19400,1.); +#19400 = DIRECTION('',(0.,-1.)); +#19401 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19402 = ADVANCED_FACE('',(#19403),#17607,.F.); +#19403 = FACE_BOUND('',#19404,.F.); +#19404 = EDGE_LOOP('',(#19405,#19426,#19427,#19428)); +#19405 = ORIENTED_EDGE('',*,*,#19406,.T.); +#19406 = EDGE_CURVE('',#17559,#17819,#19407,.T.); +#19407 = SURFACE_CURVE('',#19408,(#19412,#19419),.PCURVE_S1.); +#19408 = LINE('',#19409,#19410); +#19409 = CARTESIAN_POINT('',(-2.55,-0.205,0.3)); +#19410 = VECTOR('',#19411,1.); +#19411 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#19412 = PCURVE('',#17607,#19413); +#19413 = DEFINITIONAL_REPRESENTATION('',(#19414),#19418); +#19414 = LINE('',#19415,#19416); +#19415 = CARTESIAN_POINT('',(0.,0.)); +#19416 = VECTOR('',#19417,1.); +#19417 = DIRECTION('',(0.,-1.)); +#19418 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19419 = PCURVE('',#17579,#19420); +#19420 = DEFINITIONAL_REPRESENTATION('',(#19421),#19425); +#19421 = LINE('',#19422,#19423); +#19422 = CARTESIAN_POINT('',(1.570796326795,2.775557561563E-17)); +#19423 = VECTOR('',#19424,1.); +#19424 = DIRECTION('',(0.,-1.)); +#19425 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19426 = ORIENTED_EDGE('',*,*,#17846,.T.); +#19427 = ORIENTED_EDGE('',*,*,#19382,.F.); +#19428 = ORIENTED_EDGE('',*,*,#17591,.F.); +#19429 = ADVANCED_FACE('',(#19430),#17579,.F.); +#19430 = FACE_BOUND('',#19431,.F.); +#19431 = EDGE_LOOP('',(#19432,#19453,#19454,#19455)); +#19432 = ORIENTED_EDGE('',*,*,#19433,.T.); +#19433 = EDGE_CURVE('',#17531,#17796,#19434,.T.); +#19434 = SURFACE_CURVE('',#19435,(#19439,#19446),.PCURVE_S1.); +#19435 = LINE('',#19436,#19437); +#19436 = CARTESIAN_POINT('',(-2.65,-0.205,0.2)); +#19437 = VECTOR('',#19438,1.); +#19438 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#19439 = PCURVE('',#17579,#19440); +#19440 = DEFINITIONAL_REPRESENTATION('',(#19441),#19445); +#19441 = LINE('',#19442,#19443); +#19442 = CARTESIAN_POINT('',(0.,0.)); +#19443 = VECTOR('',#19444,1.); +#19444 = DIRECTION('',(0.,-1.)); +#19445 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19446 = PCURVE('',#17546,#19447); +#19447 = DEFINITIONAL_REPRESENTATION('',(#19448),#19452); +#19448 = LINE('',#19449,#19450); +#19449 = CARTESIAN_POINT('',(0.35,3.485297375361E-17)); +#19450 = VECTOR('',#19451,1.); +#19451 = DIRECTION('',(0.,-1.)); +#19452 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19453 = ORIENTED_EDGE('',*,*,#17818,.T.); +#19454 = ORIENTED_EDGE('',*,*,#19406,.F.); +#19455 = ORIENTED_EDGE('',*,*,#17558,.F.); +#19456 = ADVANCED_FACE('',(#19457),#17546,.F.); +#19457 = FACE_BOUND('',#19458,.F.); +#19458 = EDGE_LOOP('',(#19459,#19480,#19481,#19482)); +#19459 = ORIENTED_EDGE('',*,*,#19460,.T.); +#19460 = EDGE_CURVE('',#17503,#17773,#19461,.T.); +#19461 = SURFACE_CURVE('',#19462,(#19466,#19473),.PCURVE_S1.); +#19462 = LINE('',#19463,#19464); +#19463 = CARTESIAN_POINT('',(-3.,-0.205,0.2)); +#19464 = VECTOR('',#19465,1.); +#19465 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#19466 = PCURVE('',#17546,#19467); +#19467 = DEFINITIONAL_REPRESENTATION('',(#19468),#19472); +#19468 = LINE('',#19469,#19470); +#19469 = CARTESIAN_POINT('',(0.,0.)); +#19470 = VECTOR('',#19471,1.); +#19471 = DIRECTION('',(0.,-1.)); +#19472 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19473 = PCURVE('',#17518,#19474); +#19474 = DEFINITIONAL_REPRESENTATION('',(#19475),#19479); +#19475 = LINE('',#19476,#19477); +#19476 = CARTESIAN_POINT('',(0.2,0.)); +#19477 = VECTOR('',#19478,1.); +#19478 = DIRECTION('',(0.,-1.)); +#19479 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19480 = ORIENTED_EDGE('',*,*,#17795,.T.); +#19481 = ORIENTED_EDGE('',*,*,#19433,.F.); +#19482 = ORIENTED_EDGE('',*,*,#17530,.F.); +#19483 = ADVANCED_FACE('',(#19484),#17518,.F.); +#19484 = FACE_BOUND('',#19485,.F.); +#19485 = EDGE_LOOP('',(#19486,#19507,#19508,#19509)); +#19486 = ORIENTED_EDGE('',*,*,#19487,.T.); +#19487 = EDGE_CURVE('',#17475,#17750,#19488,.T.); +#19488 = SURFACE_CURVE('',#19489,(#19493,#19500),.PCURVE_S1.); +#19489 = LINE('',#19490,#19491); +#19490 = CARTESIAN_POINT('',(-3.,-0.205,5.551115123126E-17)); +#19491 = VECTOR('',#19492,1.); +#19492 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#19493 = PCURVE('',#17518,#19494); +#19494 = DEFINITIONAL_REPRESENTATION('',(#19495),#19499); +#19495 = LINE('',#19496,#19497); +#19496 = CARTESIAN_POINT('',(0.,0.)); +#19497 = VECTOR('',#19498,1.); +#19498 = DIRECTION('',(0.,-1.)); +#19499 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19500 = PCURVE('',#17490,#19501); +#19501 = DEFINITIONAL_REPRESENTATION('',(#19502),#19506); +#19502 = LINE('',#19503,#19504); +#19503 = CARTESIAN_POINT('',(0.35,-3.485297375361E-17)); +#19504 = VECTOR('',#19505,1.); +#19505 = DIRECTION('',(0.,-1.)); +#19506 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19507 = ORIENTED_EDGE('',*,*,#17772,.T.); +#19508 = ORIENTED_EDGE('',*,*,#19460,.F.); +#19509 = ORIENTED_EDGE('',*,*,#17502,.F.); +#19510 = ADVANCED_FACE('',(#19511),#17490,.F.); +#19511 = FACE_BOUND('',#19512,.F.); +#19512 = EDGE_LOOP('',(#19513,#19534,#19535,#19536)); +#19513 = ORIENTED_EDGE('',*,*,#19514,.T.); +#19514 = EDGE_CURVE('',#17446,#17726,#19515,.T.); +#19515 = SURFACE_CURVE('',#19516,(#19520,#19527),.PCURVE_S1.); +#19516 = LINE('',#19517,#19518); +#19517 = CARTESIAN_POINT('',(-2.65,-0.205,5.551115123126E-17)); +#19518 = VECTOR('',#19519,1.); +#19519 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#19520 = PCURVE('',#17490,#19521); +#19521 = DEFINITIONAL_REPRESENTATION('',(#19522),#19526); +#19522 = LINE('',#19523,#19524); +#19523 = CARTESIAN_POINT('',(0.,0.)); +#19524 = VECTOR('',#19525,1.); +#19525 = DIRECTION('',(0.,-1.)); +#19526 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19527 = PCURVE('',#17462,#19528); +#19528 = DEFINITIONAL_REPRESENTATION('',(#19529),#19533); +#19529 = LINE('',#19530,#19531); +#19530 = CARTESIAN_POINT('',(4.712388980385,0.)); +#19531 = VECTOR('',#19532,1.); +#19532 = DIRECTION('',(0.,-1.)); +#19533 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19534 = ORIENTED_EDGE('',*,*,#17749,.T.); +#19535 = ORIENTED_EDGE('',*,*,#19487,.F.); +#19536 = ORIENTED_EDGE('',*,*,#17474,.F.); +#19537 = ADVANCED_FACE('',(#19538),#17462,.T.); +#19538 = FACE_BOUND('',#19539,.T.); +#19539 = EDGE_LOOP('',(#19540,#19541,#19542,#19543)); +#19540 = ORIENTED_EDGE('',*,*,#17445,.T.); +#19541 = ORIENTED_EDGE('',*,*,#19514,.T.); +#19542 = ORIENTED_EDGE('',*,*,#17725,.F.); +#19543 = ORIENTED_EDGE('',*,*,#19544,.F.); +#19544 = EDGE_CURVE('',#17418,#17703,#19545,.T.); +#19545 = SURFACE_CURVE('',#19546,(#19550,#19557),.PCURVE_S1.); +#19546 = LINE('',#19547,#19548); +#19547 = CARTESIAN_POINT('',(-2.35,-0.205,0.3)); +#19548 = VECTOR('',#19549,1.); +#19549 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#19550 = PCURVE('',#17462,#19551); +#19551 = DEFINITIONAL_REPRESENTATION('',(#19552),#19556); +#19552 = LINE('',#19553,#19554); +#19553 = CARTESIAN_POINT('',(6.28318530718,5.551115123126E-17)); +#19554 = VECTOR('',#19555,1.); +#19555 = DIRECTION('',(0.,-1.)); +#19556 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19557 = PCURVE('',#17433,#19558); +#19558 = DEFINITIONAL_REPRESENTATION('',(#19559),#19563); +#19559 = LINE('',#19560,#19561); +#19560 = CARTESIAN_POINT('',(0.425,-4.422237021472E-32)); +#19561 = VECTOR('',#19562,1.); +#19562 = DIRECTION('',(6.767833676919E-44,-1.)); +#19563 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19564 = ADVANCED_FACE('',(#19565),#17433,.F.); +#19565 = FACE_BOUND('',#19566,.F.); +#19566 = EDGE_LOOP('',(#19567,#19568,#19569,#19570)); +#19567 = ORIENTED_EDGE('',*,*,#17964,.T.); +#19568 = ORIENTED_EDGE('',*,*,#17702,.T.); +#19569 = ORIENTED_EDGE('',*,*,#19544,.F.); +#19570 = ORIENTED_EDGE('',*,*,#17417,.F.); +#19571 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#19575)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#19572,#19573,#19574)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#19572 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#19573 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#19574 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#19575 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-02),#19572, + 'distance_accuracy_value','confusion accuracy'); +#19576 = SHAPE_DEFINITION_REPRESENTATION(#19577,#2284); +#19577 = PRODUCT_DEFINITION_SHAPE('','',#19578); +#19578 = PRODUCT_DEFINITION('design','',#19579,#19582); +#19579 = PRODUCT_DEFINITION_FORMATION('','',#19580); +#19580 = PRODUCT('SOLID','SOLID','',(#19581)); +#19581 = PRODUCT_CONTEXT('',#2,'mechanical'); +#19582 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#19583 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#19584,#19586); +#19584 = ( REPRESENTATION_RELATIONSHIP('','',#2284,#2274) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#19585) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#19585 = ITEM_DEFINED_TRANSFORMATION('','',#11,#2275); +#19586 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #19587); +#19587 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('5','=>[0:1:1:5]','',#2269, + #19578,$); +#19588 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#19580)); +#19589 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#19590,#19592); +#19590 = ( REPRESENTATION_RELATIONSHIP('','',#2274,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#19591) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#19591 = ITEM_DEFINED_TRANSFORMATION('','',#11,#27); +#19592 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #19593); +#19593 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('6','','',#5,#2269,$); +#19594 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#2271)); +#19595 = SHAPE_DEFINITION_REPRESENTATION(#19596,#19602); +#19596 = PRODUCT_DEFINITION_SHAPE('','',#19597); +#19597 = PRODUCT_DEFINITION('design','',#19598,#19601); +#19598 = PRODUCT_DEFINITION_FORMATION('','',#19599); +#19599 = PRODUCT('D_MiniMELF','D_MiniMELF','',(#19600)); +#19600 = PRODUCT_CONTEXT('',#2,'mechanical'); +#19601 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#19602 = SHAPE_REPRESENTATION('',(#11,#19603),#19607); +#19603 = AXIS2_PLACEMENT_3D('',#19604,#19605,#19606); +#19604 = CARTESIAN_POINT('',(0.,0.,0.)); +#19605 = DIRECTION('',(0.,0.,1.)); +#19606 = DIRECTION('',(1.,0.,-0.)); +#19607 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#19611)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#19608,#19609,#19610)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#19608 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#19609 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#19610 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#19611 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-02),#19608, + 'distance_accuracy_value','confusion accuracy'); +#19612 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#19613),#20199); +#19613 = MANIFOLD_SOLID_BREP('',#19614); +#19614 = CLOSED_SHELL('',(#19615,#19707,#19746,#19781,#19836,#19891, + #19926,#19961,#20020,#20079,#20135,#20191,#20195)); +#19615 = ADVANCED_FACE('',(#19616),#19630,.T.); +#19616 = FACE_BOUND('',#19617,.T.); +#19617 = EDGE_LOOP('',(#19618,#19648,#19679,#19680)); +#19618 = ORIENTED_EDGE('',*,*,#19619,.T.); +#19619 = EDGE_CURVE('',#19620,#19622,#19624,.T.); +#19620 = VERTEX_POINT('',#19621); +#19621 = CARTESIAN_POINT('',(-0.52,-4.502971492425E-17, + 4.502971492425E-17)); +#19622 = VERTEX_POINT('',#19623); +#19623 = CARTESIAN_POINT('',(-0.72,-6.234883604896E-17, + 6.234883604896E-17)); +#19624 = SEAM_CURVE('',#19625,(#19629,#19641),.PCURVE_S1.); +#19625 = LINE('',#19626,#19627); +#19626 = CARTESIAN_POINT('',(-0.52,-4.502971492425E-17, + 4.502971492425E-17)); +#19627 = VECTOR('',#19628,1.); +#19628 = DIRECTION('',(-1.,-8.659560562355E-17,8.659560562355E-17)); +#19629 = PCURVE('',#19630,#19635); +#19630 = CYLINDRICAL_SURFACE('',#19631,0.7); +#19631 = AXIS2_PLACEMENT_3D('',#19632,#19633,#19634); +#19632 = CARTESIAN_POINT('',(-0.52,-4.502971492425E-17,0.7)); +#19633 = DIRECTION('',(-1.,-8.659560562355E-17,8.659560562355E-17)); +#19634 = DIRECTION('',(-8.659560562355E-17,-9.860761315263E-32,-1.)); +#19635 = DEFINITIONAL_REPRESENTATION('',(#19636),#19640); +#19636 = LINE('',#19637,#19638); +#19637 = CARTESIAN_POINT('',(6.28318530718,-1.110223024625E-16)); +#19638 = VECTOR('',#19639,1.); +#19639 = DIRECTION('',(0.,1.)); +#19640 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19641 = PCURVE('',#19630,#19642); +#19642 = DEFINITIONAL_REPRESENTATION('',(#19643),#19647); +#19643 = LINE('',#19644,#19645); +#19644 = CARTESIAN_POINT('',(0.,-1.110223024625E-16)); +#19645 = VECTOR('',#19646,1.); +#19646 = DIRECTION('',(0.,1.)); +#19647 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19648 = ORIENTED_EDGE('',*,*,#19649,.T.); +#19649 = EDGE_CURVE('',#19622,#19622,#19650,.T.); +#19650 = SURFACE_CURVE('',#19651,(#19656,#19663),.PCURVE_S1.); +#19651 = CIRCLE('',#19652,0.7); +#19652 = AXIS2_PLACEMENT_3D('',#19653,#19654,#19655); +#19653 = CARTESIAN_POINT('',(-0.72,-6.234883604896E-17,0.7)); +#19654 = DIRECTION('',(1.,8.659560562355E-17,-8.659560562355E-17)); +#19655 = DIRECTION('',(-8.659560562355E-17,-7.395570986447E-32,-1.)); +#19656 = PCURVE('',#19630,#19657); +#19657 = DEFINITIONAL_REPRESENTATION('',(#19658),#19662); +#19658 = LINE('',#19659,#19660); +#19659 = CARTESIAN_POINT('',(6.28318530718,0.2)); +#19660 = VECTOR('',#19661,1.); +#19661 = DIRECTION('',(-1.,0.)); +#19662 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19663 = PCURVE('',#19664,#19669); +#19664 = PLANE('',#19665); +#19665 = AXIS2_PLACEMENT_3D('',#19666,#19667,#19668); +#19666 = CARTESIAN_POINT('',(-0.72,-6.234883604896E-17,0.7)); +#19667 = DIRECTION('',(-1.,-8.659560562355E-17,8.659560562355E-17)); +#19668 = DIRECTION('',(8.659560562355E-17,7.395570986447E-32,1.)); +#19669 = DEFINITIONAL_REPRESENTATION('',(#19670),#19678); +#19670 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#19671,#19672,#19673,#19674 + ,#19675,#19676,#19677),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#19671 = CARTESIAN_POINT('',(-0.7,0.)); +#19672 = CARTESIAN_POINT('',(-0.7,1.212435565298)); +#19673 = CARTESIAN_POINT('',(0.35,0.606217782649)); +#19674 = CARTESIAN_POINT('',(1.4,1.714505518806E-16)); +#19675 = CARTESIAN_POINT('',(0.35,-0.606217782649)); +#19676 = CARTESIAN_POINT('',(-0.7,-1.212435565298)); +#19677 = CARTESIAN_POINT('',(-0.7,0.)); +#19678 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19679 = ORIENTED_EDGE('',*,*,#19619,.F.); +#19680 = ORIENTED_EDGE('',*,*,#19681,.F.); +#19681 = EDGE_CURVE('',#19620,#19620,#19682,.T.); +#19682 = SURFACE_CURVE('',#19683,(#19688,#19695),.PCURVE_S1.); +#19683 = CIRCLE('',#19684,0.7); +#19684 = AXIS2_PLACEMENT_3D('',#19685,#19686,#19687); +#19685 = CARTESIAN_POINT('',(-0.52,-4.502971492425E-17,0.7)); +#19686 = DIRECTION('',(1.,8.659560562355E-17,-8.659560562355E-17)); +#19687 = DIRECTION('',(-8.659560562355E-17,-9.860761315263E-32,-1.)); +#19688 = PCURVE('',#19630,#19689); +#19689 = DEFINITIONAL_REPRESENTATION('',(#19690),#19694); +#19690 = LINE('',#19691,#19692); +#19691 = CARTESIAN_POINT('',(6.28318530718,0.)); +#19692 = VECTOR('',#19693,1.); +#19693 = DIRECTION('',(-1.,0.)); +#19694 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19695 = PCURVE('',#19696,#19701); +#19696 = PLANE('',#19697); +#19697 = AXIS2_PLACEMENT_3D('',#19698,#19699,#19700); +#19698 = CARTESIAN_POINT('',(-0.52,-4.502971492425E-17,0.7)); +#19699 = DIRECTION('',(1.,8.659560562355E-17,-8.659560562355E-17)); +#19700 = DIRECTION('',(-8.659560562355E-17,1.7080354225E-17,-1.)); +#19701 = DEFINITIONAL_REPRESENTATION('',(#19702),#19706); +#19702 = CIRCLE('',#19703,0.7); +#19703 = AXIS2_PLACEMENT_2D('',#19704,#19705); +#19704 = CARTESIAN_POINT('',(0.,0.)); +#19705 = DIRECTION('',(1.,-1.7080354225E-17)); +#19706 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19707 = ADVANCED_FACE('',(#19708,#19711),#19696,.T.); +#19708 = FACE_BOUND('',#19709,.F.); +#19709 = EDGE_LOOP('',(#19710)); +#19710 = ORIENTED_EDGE('',*,*,#19681,.F.); +#19711 = FACE_BOUND('',#19712,.T.); +#19712 = EDGE_LOOP('',(#19713)); +#19713 = ORIENTED_EDGE('',*,*,#19714,.T.); +#19714 = EDGE_CURVE('',#19715,#19715,#19717,.T.); +#19715 = VERTEX_POINT('',#19716); +#19716 = CARTESIAN_POINT('',(-0.52,1.110223024625E-17,2.5E-02)); +#19717 = SURFACE_CURVE('',#19718,(#19723,#19734),.PCURVE_S1.); +#19718 = CIRCLE('',#19719,0.675); +#19719 = AXIS2_PLACEMENT_3D('',#19720,#19721,#19722); +#19720 = CARTESIAN_POINT('',(-0.52,3.10862446895E-16,0.7)); +#19721 = DIRECTION('',(-1.,-0.,0.)); +#19722 = DIRECTION('',(0.,-4.440892098501E-16,-1.)); +#19723 = PCURVE('',#19696,#19724); +#19724 = DEFINITIONAL_REPRESENTATION('',(#19725),#19733); +#19725 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#19726,#19727,#19728,#19729 + ,#19730,#19731,#19732),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#19726 = CARTESIAN_POINT('',(0.675,4.460270606856E-17)); +#19727 = CARTESIAN_POINT('',(0.675,-1.169134295109)); +#19728 = CARTESIAN_POINT('',(-0.3375,-0.584567147554)); +#19729 = CARTESIAN_POINT('',(-1.35,8.131437554357E-16)); +#19730 = CARTESIAN_POINT('',(-0.3375,0.584567147554)); +#19731 = CARTESIAN_POINT('',(0.675,1.169134295109)); +#19732 = CARTESIAN_POINT('',(0.675,4.460270606856E-17)); +#19733 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19734 = PCURVE('',#19735,#19740); +#19735 = CYLINDRICAL_SURFACE('',#19736,0.675); +#19736 = AXIS2_PLACEMENT_3D('',#19737,#19738,#19739); +#19737 = CARTESIAN_POINT('',(1.35,3.10862446895E-16,0.7)); +#19738 = DIRECTION('',(-1.,0.,-0.)); +#19739 = DIRECTION('',(0.,-4.440892098501E-16,-1.)); +#19740 = DEFINITIONAL_REPRESENTATION('',(#19741),#19745); +#19741 = LINE('',#19742,#19743); +#19742 = CARTESIAN_POINT('',(0.,1.87)); +#19743 = VECTOR('',#19744,1.); +#19744 = DIRECTION('',(1.,0.)); +#19745 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19746 = ADVANCED_FACE('',(#19747,#19750),#19664,.T.); +#19747 = FACE_BOUND('',#19748,.F.); +#19748 = EDGE_LOOP('',(#19749)); +#19749 = ORIENTED_EDGE('',*,*,#19649,.T.); +#19750 = FACE_BOUND('',#19751,.T.); +#19751 = EDGE_LOOP('',(#19752)); +#19752 = ORIENTED_EDGE('',*,*,#19753,.F.); +#19753 = EDGE_CURVE('',#19754,#19754,#19756,.T.); +#19754 = VERTEX_POINT('',#19755); +#19755 = CARTESIAN_POINT('',(-0.72,1.110223024625E-17,2.5E-02)); +#19756 = SURFACE_CURVE('',#19757,(#19762,#19769),.PCURVE_S1.); +#19757 = CIRCLE('',#19758,0.675); +#19758 = AXIS2_PLACEMENT_3D('',#19759,#19760,#19761); +#19759 = CARTESIAN_POINT('',(-0.72,3.10862446895E-16,0.7)); +#19760 = DIRECTION('',(-1.,-0.,0.)); +#19761 = DIRECTION('',(0.,-4.440892098501E-16,-1.)); +#19762 = PCURVE('',#19664,#19763); +#19763 = DEFINITIONAL_REPRESENTATION('',(#19764),#19768); +#19764 = CIRCLE('',#19765,0.675); +#19765 = AXIS2_PLACEMENT_2D('',#19766,#19767); +#19766 = CARTESIAN_POINT('',(2.760110535955E-47,3.73211282944E-16)); +#19767 = DIRECTION('',(-1.,-4.440892098501E-16)); +#19768 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19769 = PCURVE('',#19770,#19775); +#19770 = CYLINDRICAL_SURFACE('',#19771,0.675); +#19771 = AXIS2_PLACEMENT_3D('',#19772,#19773,#19774); +#19772 = CARTESIAN_POINT('',(1.35,3.10862446895E-16,0.7)); +#19773 = DIRECTION('',(-1.,0.,-0.)); +#19774 = DIRECTION('',(0.,-4.440892098501E-16,-1.)); +#19775 = DEFINITIONAL_REPRESENTATION('',(#19776),#19780); +#19776 = LINE('',#19777,#19778); +#19777 = CARTESIAN_POINT('',(0.,2.07)); +#19778 = VECTOR('',#19779,1.); +#19779 = DIRECTION('',(1.,0.)); +#19780 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19781 = ADVANCED_FACE('',(#19782),#19735,.T.); +#19782 = FACE_BOUND('',#19783,.T.); +#19783 = EDGE_LOOP('',(#19784,#19813,#19834,#19835)); +#19784 = ORIENTED_EDGE('',*,*,#19785,.T.); +#19785 = EDGE_CURVE('',#19786,#19786,#19788,.T.); +#19786 = VERTEX_POINT('',#19787); +#19787 = CARTESIAN_POINT('',(0.9,1.110223024625E-17,2.5E-02)); +#19788 = SURFACE_CURVE('',#19789,(#19794,#19801),.PCURVE_S1.); +#19789 = CIRCLE('',#19790,0.675); +#19790 = AXIS2_PLACEMENT_3D('',#19791,#19792,#19793); +#19791 = CARTESIAN_POINT('',(0.9,3.10862446895E-16,0.7)); +#19792 = DIRECTION('',(-1.,-0.,0.)); +#19793 = DIRECTION('',(0.,-4.440892098501E-16,-1.)); +#19794 = PCURVE('',#19735,#19795); +#19795 = DEFINITIONAL_REPRESENTATION('',(#19796),#19800); +#19796 = LINE('',#19797,#19798); +#19797 = CARTESIAN_POINT('',(0.,0.45)); +#19798 = VECTOR('',#19799,1.); +#19799 = DIRECTION('',(1.,0.)); +#19800 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19801 = PCURVE('',#19802,#19807); +#19802 = PLANE('',#19803); +#19803 = AXIS2_PLACEMENT_3D('',#19804,#19805,#19806); +#19804 = CARTESIAN_POINT('',(0.9,3.10862446895E-16,0.7)); +#19805 = DIRECTION('',(-1.,0.,-0.)); +#19806 = DIRECTION('',(0.,-4.440892098501E-16,-1.)); +#19807 = DEFINITIONAL_REPRESENTATION('',(#19808),#19812); +#19808 = CIRCLE('',#19809,0.675); +#19809 = AXIS2_PLACEMENT_2D('',#19810,#19811); +#19810 = CARTESIAN_POINT('',(0.,0.)); +#19811 = DIRECTION('',(1.,0.)); +#19812 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19813 = ORIENTED_EDGE('',*,*,#19814,.T.); +#19814 = EDGE_CURVE('',#19786,#19715,#19815,.T.); +#19815 = SEAM_CURVE('',#19816,(#19820,#19827),.PCURVE_S1.); +#19816 = LINE('',#19817,#19818); +#19817 = CARTESIAN_POINT('',(1.35,1.110223024625E-17,2.5E-02)); +#19818 = VECTOR('',#19819,1.); +#19819 = DIRECTION('',(-1.,0.,0.)); +#19820 = PCURVE('',#19735,#19821); +#19821 = DEFINITIONAL_REPRESENTATION('',(#19822),#19826); +#19822 = LINE('',#19823,#19824); +#19823 = CARTESIAN_POINT('',(6.28318530718,0.)); +#19824 = VECTOR('',#19825,1.); +#19825 = DIRECTION('',(0.,1.)); +#19826 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19827 = PCURVE('',#19735,#19828); +#19828 = DEFINITIONAL_REPRESENTATION('',(#19829),#19833); +#19829 = LINE('',#19830,#19831); +#19830 = CARTESIAN_POINT('',(0.,0.)); +#19831 = VECTOR('',#19832,1.); +#19832 = DIRECTION('',(0.,1.)); +#19833 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19834 = ORIENTED_EDGE('',*,*,#19714,.F.); +#19835 = ORIENTED_EDGE('',*,*,#19814,.F.); +#19836 = ADVANCED_FACE('',(#19837),#19770,.T.); +#19837 = FACE_BOUND('',#19838,.T.); +#19838 = EDGE_LOOP('',(#19839,#19840,#19863,#19890)); +#19839 = ORIENTED_EDGE('',*,*,#19753,.T.); +#19840 = ORIENTED_EDGE('',*,*,#19841,.T.); +#19841 = EDGE_CURVE('',#19754,#19842,#19844,.T.); +#19842 = VERTEX_POINT('',#19843); +#19843 = CARTESIAN_POINT('',(-0.9,1.110223024625E-17,2.5E-02)); +#19844 = SEAM_CURVE('',#19845,(#19849,#19856),.PCURVE_S1.); +#19845 = LINE('',#19846,#19847); +#19846 = CARTESIAN_POINT('',(1.35,1.110223024625E-17,2.5E-02)); +#19847 = VECTOR('',#19848,1.); +#19848 = DIRECTION('',(-1.,0.,0.)); +#19849 = PCURVE('',#19770,#19850); +#19850 = DEFINITIONAL_REPRESENTATION('',(#19851),#19855); +#19851 = LINE('',#19852,#19853); +#19852 = CARTESIAN_POINT('',(6.28318530718,0.)); +#19853 = VECTOR('',#19854,1.); +#19854 = DIRECTION('',(0.,1.)); +#19855 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19856 = PCURVE('',#19770,#19857); +#19857 = DEFINITIONAL_REPRESENTATION('',(#19858),#19862); +#19858 = LINE('',#19859,#19860); +#19859 = CARTESIAN_POINT('',(0.,0.)); +#19860 = VECTOR('',#19861,1.); +#19861 = DIRECTION('',(0.,1.)); +#19862 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19863 = ORIENTED_EDGE('',*,*,#19864,.F.); +#19864 = EDGE_CURVE('',#19842,#19842,#19865,.T.); +#19865 = SURFACE_CURVE('',#19866,(#19871,#19878),.PCURVE_S1.); +#19866 = CIRCLE('',#19867,0.675); +#19867 = AXIS2_PLACEMENT_3D('',#19868,#19869,#19870); +#19868 = CARTESIAN_POINT('',(-0.9,3.10862446895E-16,0.7)); +#19869 = DIRECTION('',(-1.,-0.,0.)); +#19870 = DIRECTION('',(0.,-4.440892098501E-16,-1.)); +#19871 = PCURVE('',#19770,#19872); +#19872 = DEFINITIONAL_REPRESENTATION('',(#19873),#19877); +#19873 = LINE('',#19874,#19875); +#19874 = CARTESIAN_POINT('',(0.,2.25)); +#19875 = VECTOR('',#19876,1.); +#19876 = DIRECTION('',(1.,0.)); +#19877 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19878 = PCURVE('',#19879,#19884); +#19879 = PLANE('',#19880); +#19880 = AXIS2_PLACEMENT_3D('',#19881,#19882,#19883); +#19881 = CARTESIAN_POINT('',(-0.9,3.10862446895E-16,0.7)); +#19882 = DIRECTION('',(-1.,0.,-0.)); +#19883 = DIRECTION('',(0.,-4.440892098501E-16,-1.)); +#19884 = DEFINITIONAL_REPRESENTATION('',(#19885),#19889); +#19885 = CIRCLE('',#19886,0.675); +#19886 = AXIS2_PLACEMENT_2D('',#19887,#19888); +#19887 = CARTESIAN_POINT('',(0.,0.)); +#19888 = DIRECTION('',(1.,0.)); +#19889 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19890 = ORIENTED_EDGE('',*,*,#19841,.F.); +#19891 = ADVANCED_FACE('',(#19892,#19923),#19802,.T.); +#19892 = FACE_BOUND('',#19893,.T.); +#19893 = EDGE_LOOP('',(#19894)); +#19894 = ORIENTED_EDGE('',*,*,#19895,.T.); +#19895 = EDGE_CURVE('',#19896,#19896,#19898,.T.); +#19896 = VERTEX_POINT('',#19897); +#19897 = CARTESIAN_POINT('',(0.9,0.,0.)); +#19898 = SURFACE_CURVE('',#19899,(#19904,#19911),.PCURVE_S1.); +#19899 = CIRCLE('',#19900,0.7); +#19900 = AXIS2_PLACEMENT_3D('',#19901,#19902,#19903); +#19901 = CARTESIAN_POINT('',(0.9,3.10862446895E-16,0.7)); +#19902 = DIRECTION('',(-1.,-0.,0.)); +#19903 = DIRECTION('',(0.,-4.440892098501E-16,-1.)); +#19904 = PCURVE('',#19802,#19905); +#19905 = DEFINITIONAL_REPRESENTATION('',(#19906),#19910); +#19906 = CIRCLE('',#19907,0.7); +#19907 = AXIS2_PLACEMENT_2D('',#19908,#19909); +#19908 = CARTESIAN_POINT('',(0.,0.)); +#19909 = DIRECTION('',(1.,0.)); +#19910 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19911 = PCURVE('',#19912,#19917); +#19912 = CYLINDRICAL_SURFACE('',#19913,0.7); +#19913 = AXIS2_PLACEMENT_3D('',#19914,#19915,#19916); +#19914 = CARTESIAN_POINT('',(0.9,3.10862446895E-16,0.7)); +#19915 = DIRECTION('',(1.,0.,0.)); +#19916 = DIRECTION('',(0.,-4.440892098501E-16,-1.)); +#19917 = DEFINITIONAL_REPRESENTATION('',(#19918),#19922); +#19918 = LINE('',#19919,#19920); +#19919 = CARTESIAN_POINT('',(6.28318530718,0.)); +#19920 = VECTOR('',#19921,1.); +#19921 = DIRECTION('',(-1.,0.)); +#19922 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19923 = FACE_BOUND('',#19924,.T.); +#19924 = EDGE_LOOP('',(#19925)); +#19925 = ORIENTED_EDGE('',*,*,#19785,.F.); +#19926 = ADVANCED_FACE('',(#19927,#19958),#19879,.F.); +#19927 = FACE_BOUND('',#19928,.F.); +#19928 = EDGE_LOOP('',(#19929)); +#19929 = ORIENTED_EDGE('',*,*,#19930,.T.); +#19930 = EDGE_CURVE('',#19931,#19931,#19933,.T.); +#19931 = VERTEX_POINT('',#19932); +#19932 = CARTESIAN_POINT('',(-0.9,0.,0.)); +#19933 = SURFACE_CURVE('',#19934,(#19939,#19946),.PCURVE_S1.); +#19934 = CIRCLE('',#19935,0.7); +#19935 = AXIS2_PLACEMENT_3D('',#19936,#19937,#19938); +#19936 = CARTESIAN_POINT('',(-0.9,3.10862446895E-16,0.7)); +#19937 = DIRECTION('',(-1.,-0.,0.)); +#19938 = DIRECTION('',(0.,-4.440892098501E-16,-1.)); +#19939 = PCURVE('',#19879,#19940); +#19940 = DEFINITIONAL_REPRESENTATION('',(#19941),#19945); +#19941 = CIRCLE('',#19942,0.7); +#19942 = AXIS2_PLACEMENT_2D('',#19943,#19944); +#19943 = CARTESIAN_POINT('',(0.,0.)); +#19944 = DIRECTION('',(1.,0.)); +#19945 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19946 = PCURVE('',#19947,#19952); +#19947 = CYLINDRICAL_SURFACE('',#19948,0.7); +#19948 = AXIS2_PLACEMENT_3D('',#19949,#19950,#19951); +#19949 = CARTESIAN_POINT('',(-1.7,3.10862446895E-16,0.7)); +#19950 = DIRECTION('',(1.,0.,0.)); +#19951 = DIRECTION('',(0.,-4.440892098501E-16,-1.)); +#19952 = DEFINITIONAL_REPRESENTATION('',(#19953),#19957); +#19953 = LINE('',#19954,#19955); +#19954 = CARTESIAN_POINT('',(6.28318530718,0.8)); +#19955 = VECTOR('',#19956,1.); +#19956 = DIRECTION('',(-1.,0.)); +#19957 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19958 = FACE_BOUND('',#19959,.F.); +#19959 = EDGE_LOOP('',(#19960)); +#19960 = ORIENTED_EDGE('',*,*,#19864,.F.); +#19961 = ADVANCED_FACE('',(#19962),#19912,.T.); +#19962 = FACE_BOUND('',#19963,.T.); +#19963 = EDGE_LOOP('',(#19964,#19987,#20018,#20019)); +#19964 = ORIENTED_EDGE('',*,*,#19965,.T.); +#19965 = EDGE_CURVE('',#19896,#19966,#19968,.T.); +#19966 = VERTEX_POINT('',#19967); +#19967 = CARTESIAN_POINT('',(1.7,0.,0.)); +#19968 = SEAM_CURVE('',#19969,(#19973,#19980),.PCURVE_S1.); +#19969 = LINE('',#19970,#19971); +#19970 = CARTESIAN_POINT('',(0.9,4.440892098501E-33,1.E-17)); +#19971 = VECTOR('',#19972,1.); +#19972 = DIRECTION('',(1.,0.,0.)); +#19973 = PCURVE('',#19912,#19974); +#19974 = DEFINITIONAL_REPRESENTATION('',(#19975),#19979); +#19975 = LINE('',#19976,#19977); +#19976 = CARTESIAN_POINT('',(6.28318530718,0.)); +#19977 = VECTOR('',#19978,1.); +#19978 = DIRECTION('',(0.,1.)); +#19979 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19980 = PCURVE('',#19912,#19981); +#19981 = DEFINITIONAL_REPRESENTATION('',(#19982),#19986); +#19982 = LINE('',#19983,#19984); +#19983 = CARTESIAN_POINT('',(0.,0.)); +#19984 = VECTOR('',#19985,1.); +#19985 = DIRECTION('',(0.,1.)); +#19986 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#19987 = ORIENTED_EDGE('',*,*,#19988,.T.); +#19988 = EDGE_CURVE('',#19966,#19966,#19989,.T.); +#19989 = SURFACE_CURVE('',#19990,(#19995,#20002),.PCURVE_S1.); +#19990 = CIRCLE('',#19991,0.7); +#19991 = AXIS2_PLACEMENT_3D('',#19992,#19993,#19994); +#19992 = CARTESIAN_POINT('',(1.7,3.10862446895E-16,0.7)); +#19993 = DIRECTION('',(-1.,-0.,0.)); +#19994 = DIRECTION('',(0.,-4.440892098501E-16,-1.)); +#19995 = PCURVE('',#19912,#19996); +#19996 = DEFINITIONAL_REPRESENTATION('',(#19997),#20001); +#19997 = LINE('',#19998,#19999); +#19998 = CARTESIAN_POINT('',(6.28318530718,0.8)); +#19999 = VECTOR('',#20000,1.); +#20000 = DIRECTION('',(-1.,0.)); +#20001 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20002 = PCURVE('',#20003,#20012); +#20003 = SURFACE_OF_REVOLUTION('',#20004,#20009); +#20004 = CIRCLE('',#20005,0.1); +#20005 = AXIS2_PLACEMENT_3D('',#20006,#20007,#20008); +#20006 = CARTESIAN_POINT('',(1.7,4.440892098501E-17,0.1)); +#20007 = DIRECTION('',(0.,-1.,4.440892098501E-16)); +#20008 = DIRECTION('',(1.,0.,0.)); +#20009 = AXIS1_PLACEMENT('',#20010,#20011); +#20010 = CARTESIAN_POINT('',(-8.2,3.10862446895E-16,0.7)); +#20011 = DIRECTION('',(-1.,0.,-0.)); +#20012 = DEFINITIONAL_REPRESENTATION('',(#20013),#20017); +#20013 = LINE('',#20014,#20015); +#20014 = CARTESIAN_POINT('',(0.,4.712388980385)); +#20015 = VECTOR('',#20016,1.); +#20016 = DIRECTION('',(1.,0.)); +#20017 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20018 = ORIENTED_EDGE('',*,*,#19965,.F.); +#20019 = ORIENTED_EDGE('',*,*,#19895,.F.); +#20020 = ADVANCED_FACE('',(#20021),#19947,.T.); +#20021 = FACE_BOUND('',#20022,.T.); +#20022 = EDGE_LOOP('',(#20023,#20046,#20047,#20048)); +#20023 = ORIENTED_EDGE('',*,*,#20024,.T.); +#20024 = EDGE_CURVE('',#20025,#19931,#20027,.T.); +#20025 = VERTEX_POINT('',#20026); +#20026 = CARTESIAN_POINT('',(-1.7,0.,0.)); +#20027 = SEAM_CURVE('',#20028,(#20032,#20039),.PCURVE_S1.); +#20028 = LINE('',#20029,#20030); +#20029 = CARTESIAN_POINT('',(-1.7,-1.33226762955E-32,-3.E-17)); +#20030 = VECTOR('',#20031,1.); +#20031 = DIRECTION('',(1.,0.,0.)); +#20032 = PCURVE('',#19947,#20033); +#20033 = DEFINITIONAL_REPRESENTATION('',(#20034),#20038); +#20034 = LINE('',#20035,#20036); +#20035 = CARTESIAN_POINT('',(6.28318530718,0.)); +#20036 = VECTOR('',#20037,1.); +#20037 = DIRECTION('',(0.,1.)); +#20038 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20039 = PCURVE('',#19947,#20040); +#20040 = DEFINITIONAL_REPRESENTATION('',(#20041),#20045); +#20041 = LINE('',#20042,#20043); +#20042 = CARTESIAN_POINT('',(0.,0.)); +#20043 = VECTOR('',#20044,1.); +#20044 = DIRECTION('',(0.,1.)); +#20045 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20046 = ORIENTED_EDGE('',*,*,#19930,.T.); +#20047 = ORIENTED_EDGE('',*,*,#20024,.F.); +#20048 = ORIENTED_EDGE('',*,*,#20049,.F.); +#20049 = EDGE_CURVE('',#20025,#20025,#20050,.T.); +#20050 = SURFACE_CURVE('',#20051,(#20056,#20063),.PCURVE_S1.); +#20051 = CIRCLE('',#20052,0.7); +#20052 = AXIS2_PLACEMENT_3D('',#20053,#20054,#20055); +#20053 = CARTESIAN_POINT('',(-1.7,3.10862446895E-16,0.7)); +#20054 = DIRECTION('',(-1.,-0.,0.)); +#20055 = DIRECTION('',(0.,-4.440892098501E-16,-1.)); +#20056 = PCURVE('',#19947,#20057); +#20057 = DEFINITIONAL_REPRESENTATION('',(#20058),#20062); +#20058 = LINE('',#20059,#20060); +#20059 = CARTESIAN_POINT('',(6.28318530718,0.)); +#20060 = VECTOR('',#20061,1.); +#20061 = DIRECTION('',(-1.,0.)); +#20062 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20063 = PCURVE('',#20064,#20073); +#20064 = SURFACE_OF_REVOLUTION('',#20065,#20070); +#20065 = CIRCLE('',#20066,0.1); +#20066 = AXIS2_PLACEMENT_3D('',#20067,#20068,#20069); +#20067 = CARTESIAN_POINT('',(-1.7,4.440892098501E-17,0.1)); +#20068 = DIRECTION('',(0.,-1.,4.440892098501E-16)); +#20069 = DIRECTION('',(1.,0.,0.)); +#20070 = AXIS1_PLACEMENT('',#20071,#20072); +#20071 = CARTESIAN_POINT('',(-8.2,3.10862446895E-16,0.7)); +#20072 = DIRECTION('',(-1.,0.,-0.)); +#20073 = DEFINITIONAL_REPRESENTATION('',(#20074),#20078); +#20074 = LINE('',#20075,#20076); +#20075 = CARTESIAN_POINT('',(0.,4.712388980385)); +#20076 = VECTOR('',#20077,1.); +#20077 = DIRECTION('',(1.,0.)); +#20078 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20079 = ADVANCED_FACE('',(#20080),#20003,.F.); +#20080 = FACE_BOUND('',#20081,.F.); +#20081 = EDGE_LOOP('',(#20082,#20083,#20107,#20134)); +#20082 = ORIENTED_EDGE('',*,*,#19988,.T.); +#20083 = ORIENTED_EDGE('',*,*,#20084,.T.); +#20084 = EDGE_CURVE('',#19966,#20085,#20087,.T.); +#20085 = VERTEX_POINT('',#20086); +#20086 = CARTESIAN_POINT('',(1.8,4.440892098501E-17,0.1)); +#20087 = SEAM_CURVE('',#20088,(#20093,#20100),.PCURVE_S1.); +#20088 = CIRCLE('',#20089,0.1); +#20089 = AXIS2_PLACEMENT_3D('',#20090,#20091,#20092); +#20090 = CARTESIAN_POINT('',(1.7,4.440892098501E-17,0.1)); +#20091 = DIRECTION('',(0.,-1.,4.440892098501E-16)); +#20092 = DIRECTION('',(1.,0.,0.)); +#20093 = PCURVE('',#20003,#20094); +#20094 = DEFINITIONAL_REPRESENTATION('',(#20095),#20099); +#20095 = LINE('',#20096,#20097); +#20096 = CARTESIAN_POINT('',(6.28318530718,0.)); +#20097 = VECTOR('',#20098,1.); +#20098 = DIRECTION('',(0.,1.)); +#20099 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20100 = PCURVE('',#20003,#20101); +#20101 = DEFINITIONAL_REPRESENTATION('',(#20102),#20106); +#20102 = LINE('',#20103,#20104); +#20103 = CARTESIAN_POINT('',(0.,0.)); +#20104 = VECTOR('',#20105,1.); +#20105 = DIRECTION('',(0.,1.)); +#20106 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20107 = ORIENTED_EDGE('',*,*,#20108,.F.); +#20108 = EDGE_CURVE('',#20085,#20085,#20109,.T.); +#20109 = SURFACE_CURVE('',#20110,(#20115,#20122),.PCURVE_S1.); +#20110 = CIRCLE('',#20111,0.6); +#20111 = AXIS2_PLACEMENT_3D('',#20112,#20113,#20114); +#20112 = CARTESIAN_POINT('',(1.8,3.10862446895E-16,0.7)); +#20113 = DIRECTION('',(-1.,-0.,0.)); +#20114 = DIRECTION('',(0.,-4.440892098501E-16,-1.)); +#20115 = PCURVE('',#20003,#20116); +#20116 = DEFINITIONAL_REPRESENTATION('',(#20117),#20121); +#20117 = LINE('',#20118,#20119); +#20118 = CARTESIAN_POINT('',(0.,6.28318530718)); +#20119 = VECTOR('',#20120,1.); +#20120 = DIRECTION('',(1.,0.)); +#20121 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20122 = PCURVE('',#20123,#20128); +#20123 = PLANE('',#20124); +#20124 = AXIS2_PLACEMENT_3D('',#20125,#20126,#20127); +#20125 = CARTESIAN_POINT('',(1.8,3.10862446895E-16,0.7)); +#20126 = DIRECTION('',(-1.,0.,-0.)); +#20127 = DIRECTION('',(0.,-4.440892098501E-16,-1.)); +#20128 = DEFINITIONAL_REPRESENTATION('',(#20129),#20133); +#20129 = CIRCLE('',#20130,0.6); +#20130 = AXIS2_PLACEMENT_2D('',#20131,#20132); +#20131 = CARTESIAN_POINT('',(0.,0.)); +#20132 = DIRECTION('',(1.,0.)); +#20133 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20134 = ORIENTED_EDGE('',*,*,#20084,.F.); +#20135 = ADVANCED_FACE('',(#20136),#20064,.F.); +#20136 = FACE_BOUND('',#20137,.F.); +#20137 = EDGE_LOOP('',(#20138,#20167,#20189,#20190)); +#20138 = ORIENTED_EDGE('',*,*,#20139,.T.); +#20139 = EDGE_CURVE('',#20140,#20140,#20142,.T.); +#20140 = VERTEX_POINT('',#20141); +#20141 = CARTESIAN_POINT('',(-1.8,4.440892098501E-17,0.1)); +#20142 = SURFACE_CURVE('',#20143,(#20148,#20155),.PCURVE_S1.); +#20143 = CIRCLE('',#20144,0.6); +#20144 = AXIS2_PLACEMENT_3D('',#20145,#20146,#20147); +#20145 = CARTESIAN_POINT('',(-1.8,3.10862446895E-16,0.7)); +#20146 = DIRECTION('',(-1.,-0.,0.)); +#20147 = DIRECTION('',(0.,-4.440892098501E-16,-1.)); +#20148 = PCURVE('',#20064,#20149); +#20149 = DEFINITIONAL_REPRESENTATION('',(#20150),#20154); +#20150 = LINE('',#20151,#20152); +#20151 = CARTESIAN_POINT('',(0.,3.14159265359)); +#20152 = VECTOR('',#20153,1.); +#20153 = DIRECTION('',(1.,0.)); +#20154 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20155 = PCURVE('',#20156,#20161); +#20156 = PLANE('',#20157); +#20157 = AXIS2_PLACEMENT_3D('',#20158,#20159,#20160); +#20158 = CARTESIAN_POINT('',(-1.8,3.10862446895E-16,0.7)); +#20159 = DIRECTION('',(-1.,0.,-0.)); +#20160 = DIRECTION('',(0.,-4.440892098501E-16,-1.)); +#20161 = DEFINITIONAL_REPRESENTATION('',(#20162),#20166); +#20162 = CIRCLE('',#20163,0.6); +#20163 = AXIS2_PLACEMENT_2D('',#20164,#20165); +#20164 = CARTESIAN_POINT('',(0.,0.)); +#20165 = DIRECTION('',(1.,0.)); +#20166 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20167 = ORIENTED_EDGE('',*,*,#20168,.T.); +#20168 = EDGE_CURVE('',#20140,#20025,#20169,.T.); +#20169 = SEAM_CURVE('',#20170,(#20175,#20182),.PCURVE_S1.); +#20170 = CIRCLE('',#20171,0.1); +#20171 = AXIS2_PLACEMENT_3D('',#20172,#20173,#20174); +#20172 = CARTESIAN_POINT('',(-1.7,4.440892098501E-17,0.1)); +#20173 = DIRECTION('',(0.,-1.,4.440892098501E-16)); +#20174 = DIRECTION('',(1.,0.,0.)); +#20175 = PCURVE('',#20064,#20176); +#20176 = DEFINITIONAL_REPRESENTATION('',(#20177),#20181); +#20177 = LINE('',#20178,#20179); +#20178 = CARTESIAN_POINT('',(6.28318530718,0.)); +#20179 = VECTOR('',#20180,1.); +#20180 = DIRECTION('',(0.,1.)); +#20181 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20182 = PCURVE('',#20064,#20183); +#20183 = DEFINITIONAL_REPRESENTATION('',(#20184),#20188); +#20184 = LINE('',#20185,#20186); +#20185 = CARTESIAN_POINT('',(0.,0.)); +#20186 = VECTOR('',#20187,1.); +#20187 = DIRECTION('',(0.,1.)); +#20188 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20189 = ORIENTED_EDGE('',*,*,#20049,.F.); +#20190 = ORIENTED_EDGE('',*,*,#20168,.F.); +#20191 = ADVANCED_FACE('',(#20192),#20123,.F.); +#20192 = FACE_BOUND('',#20193,.F.); +#20193 = EDGE_LOOP('',(#20194)); +#20194 = ORIENTED_EDGE('',*,*,#20108,.T.); +#20195 = ADVANCED_FACE('',(#20196),#20156,.T.); +#20196 = FACE_BOUND('',#20197,.F.); +#20197 = EDGE_LOOP('',(#20198)); +#20198 = ORIENTED_EDGE('',*,*,#20139,.F.); +#20199 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#20203)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#20200,#20201,#20202)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#20200 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#20201 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#20202 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#20203 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-02),#20200, + 'distance_accuracy_value','confusion accuracy'); +#20204 = SHAPE_DEFINITION_REPRESENTATION(#20205,#19612); +#20205 = PRODUCT_DEFINITION_SHAPE('','',#20206); +#20206 = PRODUCT_DEFINITION('design','',#20207,#20210); +#20207 = PRODUCT_DEFINITION_FORMATION('','',#20208); +#20208 = PRODUCT('SOLID','SOLID','',(#20209)); +#20209 = PRODUCT_CONTEXT('',#2,'mechanical'); +#20210 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#20211 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#20212,#20214); +#20212 = ( REPRESENTATION_RELATIONSHIP('','',#19612,#19602) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#20213) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#20213 = ITEM_DEFINED_TRANSFORMATION('','',#11,#19603); +#20214 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #20215); +#20215 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('7','=>[0:1:1:7]','',#19597, + #20206,$); +#20216 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#20208)); +#20217 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#20218,#20220); +#20218 = ( REPRESENTATION_RELATIONSHIP('','',#19602,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#20219) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#20219 = ITEM_DEFINED_TRANSFORMATION('','',#11,#31); +#20220 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #20221); +#20221 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('8','','',#5,#19597,$); +#20222 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#19599)); +#20223 = SHAPE_DEFINITION_REPRESENTATION(#20224,#20230); +#20224 = PRODUCT_DEFINITION_SHAPE('','',#20225); +#20225 = PRODUCT_DEFINITION('design','',#20226,#20229); +#20226 = PRODUCT_DEFINITION_FORMATION('','',#20227); +#20227 = PRODUCT('R_0805_2012Metric','R_0805_2012Metric','',(#20228)); +#20228 = PRODUCT_CONTEXT('',#2,'mechanical'); +#20229 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#20230 = SHAPE_REPRESENTATION('',(#11,#20231),#20235); +#20231 = AXIS2_PLACEMENT_3D('',#20232,#20233,#20234); +#20232 = CARTESIAN_POINT('',(0.,0.,0.)); +#20233 = DIRECTION('',(0.,0.,1.)); +#20234 = DIRECTION('',(1.,0.,-0.)); +#20235 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#20239)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#20236,#20237,#20238)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#20236 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#20237 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#20238 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#20239 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-02),#20236, + 'distance_accuracy_value','confusion accuracy'); +#20240 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#20241),#22083); +#20241 = MANIFOLD_SOLID_BREP('',#20242); +#20242 = CLOSED_SHELL('',(#20243,#20363,#20609,#20663,#20713,#20889, + #20916,#20948,#21077,#21104,#21136,#21265,#21297,#21504,#21585, + #21634,#21811,#21860,#21887,#21914,#21941,#21968,#21995,#22022, + #22049,#22076)); +#20243 = ADVANCED_FACE('',(#20244),#20258,.F.); +#20244 = FACE_BOUND('',#20245,.F.); +#20245 = EDGE_LOOP('',(#20246,#20281,#20309,#20337)); +#20246 = ORIENTED_EDGE('',*,*,#20247,.F.); +#20247 = EDGE_CURVE('',#20248,#20250,#20252,.T.); +#20248 = VERTEX_POINT('',#20249); +#20249 = CARTESIAN_POINT('',(-1.,-0.6,4.5E-02)); +#20250 = VERTEX_POINT('',#20251); +#20251 = CARTESIAN_POINT('',(-1.,-0.6,0.405)); +#20252 = SURFACE_CURVE('',#20253,(#20257,#20269),.PCURVE_S1.); +#20253 = LINE('',#20254,#20255); +#20254 = CARTESIAN_POINT('',(-1.,-0.6,0.)); +#20255 = VECTOR('',#20256,1.); +#20256 = DIRECTION('',(0.,0.,1.)); +#20257 = PCURVE('',#20258,#20263); +#20258 = PLANE('',#20259); +#20259 = AXIS2_PLACEMENT_3D('',#20260,#20261,#20262); +#20260 = CARTESIAN_POINT('',(-1.,-0.6,0.)); +#20261 = DIRECTION('',(1.,0.,0.)); +#20262 = DIRECTION('',(0.,0.,1.)); +#20263 = DEFINITIONAL_REPRESENTATION('',(#20264),#20268); +#20264 = LINE('',#20265,#20266); +#20265 = CARTESIAN_POINT('',(0.,0.)); +#20266 = VECTOR('',#20267,1.); +#20267 = DIRECTION('',(1.,0.)); +#20268 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20269 = PCURVE('',#20270,#20275); +#20270 = PLANE('',#20271); +#20271 = AXIS2_PLACEMENT_3D('',#20272,#20273,#20274); +#20272 = CARTESIAN_POINT('',(-1.,-0.6,0.)); +#20273 = DIRECTION('',(0.,1.,0.)); +#20274 = DIRECTION('',(0.,-0.,1.)); +#20275 = DEFINITIONAL_REPRESENTATION('',(#20276),#20280); +#20276 = LINE('',#20277,#20278); +#20277 = CARTESIAN_POINT('',(0.,0.)); +#20278 = VECTOR('',#20279,1.); +#20279 = DIRECTION('',(1.,0.)); +#20280 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20281 = ORIENTED_EDGE('',*,*,#20282,.T.); +#20282 = EDGE_CURVE('',#20248,#20283,#20285,.T.); +#20283 = VERTEX_POINT('',#20284); +#20284 = CARTESIAN_POINT('',(-1.,0.6,4.5E-02)); +#20285 = SURFACE_CURVE('',#20286,(#20290,#20297),.PCURVE_S1.); +#20286 = LINE('',#20287,#20288); +#20287 = CARTESIAN_POINT('',(-1.,-0.6,4.5E-02)); +#20288 = VECTOR('',#20289,1.); +#20289 = DIRECTION('',(0.,1.,0.)); +#20290 = PCURVE('',#20258,#20291); +#20291 = DEFINITIONAL_REPRESENTATION('',(#20292),#20296); +#20292 = LINE('',#20293,#20294); +#20293 = CARTESIAN_POINT('',(4.5E-02,0.)); +#20294 = VECTOR('',#20295,1.); +#20295 = DIRECTION('',(0.,-1.)); +#20296 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20297 = PCURVE('',#20298,#20303); +#20298 = CYLINDRICAL_SURFACE('',#20299,4.5E-02); +#20299 = AXIS2_PLACEMENT_3D('',#20300,#20301,#20302); +#20300 = CARTESIAN_POINT('',(-0.955,-0.6,4.5E-02)); +#20301 = DIRECTION('',(0.,1.,0.)); +#20302 = DIRECTION('',(-1.,0.,0.)); +#20303 = DEFINITIONAL_REPRESENTATION('',(#20304),#20308); +#20304 = LINE('',#20305,#20306); +#20305 = CARTESIAN_POINT('',(6.28318530718,0.)); +#20306 = VECTOR('',#20307,1.); +#20307 = DIRECTION('',(0.,1.)); +#20308 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20309 = ORIENTED_EDGE('',*,*,#20310,.T.); +#20310 = EDGE_CURVE('',#20283,#20311,#20313,.T.); +#20311 = VERTEX_POINT('',#20312); +#20312 = CARTESIAN_POINT('',(-1.,0.6,0.405)); +#20313 = SURFACE_CURVE('',#20314,(#20318,#20325),.PCURVE_S1.); +#20314 = LINE('',#20315,#20316); +#20315 = CARTESIAN_POINT('',(-1.,0.6,0.)); +#20316 = VECTOR('',#20317,1.); +#20317 = DIRECTION('',(0.,0.,1.)); +#20318 = PCURVE('',#20258,#20319); +#20319 = DEFINITIONAL_REPRESENTATION('',(#20320),#20324); +#20320 = LINE('',#20321,#20322); +#20321 = CARTESIAN_POINT('',(0.,-1.2)); +#20322 = VECTOR('',#20323,1.); +#20323 = DIRECTION('',(1.,0.)); +#20324 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20325 = PCURVE('',#20326,#20331); +#20326 = PLANE('',#20327); +#20327 = AXIS2_PLACEMENT_3D('',#20328,#20329,#20330); +#20328 = CARTESIAN_POINT('',(-1.,0.6,0.)); +#20329 = DIRECTION('',(0.,1.,0.)); +#20330 = DIRECTION('',(0.,-0.,1.)); +#20331 = DEFINITIONAL_REPRESENTATION('',(#20332),#20336); +#20332 = LINE('',#20333,#20334); +#20333 = CARTESIAN_POINT('',(0.,0.)); +#20334 = VECTOR('',#20335,1.); +#20335 = DIRECTION('',(1.,0.)); +#20336 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20337 = ORIENTED_EDGE('',*,*,#20338,.F.); +#20338 = EDGE_CURVE('',#20250,#20311,#20339,.T.); +#20339 = SURFACE_CURVE('',#20340,(#20344,#20351),.PCURVE_S1.); +#20340 = LINE('',#20341,#20342); +#20341 = CARTESIAN_POINT('',(-1.,-0.6,0.405)); +#20342 = VECTOR('',#20343,1.); +#20343 = DIRECTION('',(0.,1.,0.)); +#20344 = PCURVE('',#20258,#20345); +#20345 = DEFINITIONAL_REPRESENTATION('',(#20346),#20350); +#20346 = LINE('',#20347,#20348); +#20347 = CARTESIAN_POINT('',(0.405,0.)); +#20348 = VECTOR('',#20349,1.); +#20349 = DIRECTION('',(0.,-1.)); +#20350 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20351 = PCURVE('',#20352,#20357); +#20352 = CYLINDRICAL_SURFACE('',#20353,4.5E-02); +#20353 = AXIS2_PLACEMENT_3D('',#20354,#20355,#20356); +#20354 = CARTESIAN_POINT('',(-0.955,-0.6,0.405)); +#20355 = DIRECTION('',(0.,1.,0.)); +#20356 = DIRECTION('',(-1.,0.,0.)); +#20357 = DEFINITIONAL_REPRESENTATION('',(#20358),#20362); +#20358 = LINE('',#20359,#20360); +#20359 = CARTESIAN_POINT('',(0.,0.)); +#20360 = VECTOR('',#20361,1.); +#20361 = DIRECTION('',(0.,1.)); +#20362 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20363 = ADVANCED_FACE('',(#20364),#20270,.F.); +#20364 = FACE_BOUND('',#20365,.F.); +#20365 = EDGE_LOOP('',(#20366,#20396,#20422,#20423,#20447,#20475,#20508, + #20536,#20559,#20582)); +#20366 = ORIENTED_EDGE('',*,*,#20367,.F.); +#20367 = EDGE_CURVE('',#20368,#20370,#20372,.T.); +#20368 = VERTEX_POINT('',#20369); +#20369 = CARTESIAN_POINT('',(-0.955,-0.6,-2.775557561563E-17)); +#20370 = VERTEX_POINT('',#20371); +#20371 = CARTESIAN_POINT('',(-0.745,-0.6,-2.775557561563E-17)); +#20372 = SURFACE_CURVE('',#20373,(#20377,#20384),.PCURVE_S1.); +#20373 = LINE('',#20374,#20375); +#20374 = CARTESIAN_POINT('',(-1.,-0.6,0.)); +#20375 = VECTOR('',#20376,1.); +#20376 = DIRECTION('',(1.,0.,0.)); +#20377 = PCURVE('',#20270,#20378); +#20378 = DEFINITIONAL_REPRESENTATION('',(#20379),#20383); +#20379 = LINE('',#20380,#20381); +#20380 = CARTESIAN_POINT('',(0.,0.)); +#20381 = VECTOR('',#20382,1.); +#20382 = DIRECTION('',(0.,1.)); +#20383 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20384 = PCURVE('',#20385,#20390); +#20385 = PLANE('',#20386); +#20386 = AXIS2_PLACEMENT_3D('',#20387,#20388,#20389); +#20387 = CARTESIAN_POINT('',(-1.,-0.6,0.)); +#20388 = DIRECTION('',(0.,0.,1.)); +#20389 = DIRECTION('',(1.,0.,-0.)); +#20390 = DEFINITIONAL_REPRESENTATION('',(#20391),#20395); +#20391 = LINE('',#20392,#20393); +#20392 = CARTESIAN_POINT('',(0.,0.)); +#20393 = VECTOR('',#20394,1.); +#20394 = DIRECTION('',(1.,0.)); +#20395 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20396 = ORIENTED_EDGE('',*,*,#20397,.F.); +#20397 = EDGE_CURVE('',#20248,#20368,#20398,.T.); +#20398 = SURFACE_CURVE('',#20399,(#20404,#20415),.PCURVE_S1.); +#20399 = CIRCLE('',#20400,4.5E-02); +#20400 = AXIS2_PLACEMENT_3D('',#20401,#20402,#20403); +#20401 = CARTESIAN_POINT('',(-0.955,-0.6,4.5E-02)); +#20402 = DIRECTION('',(0.,-1.,0.)); +#20403 = DIRECTION('',(0.,0.,1.)); +#20404 = PCURVE('',#20270,#20405); +#20405 = DEFINITIONAL_REPRESENTATION('',(#20406),#20414); +#20406 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#20407,#20408,#20409,#20410 + ,#20411,#20412,#20413),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#20407 = CARTESIAN_POINT('',(9.E-02,4.5E-02)); +#20408 = CARTESIAN_POINT('',(9.E-02,-3.29422863406E-02)); +#20409 = CARTESIAN_POINT('',(2.25E-02,6.0288568297E-03)); +#20410 = CARTESIAN_POINT('',(-4.5E-02,4.5E-02)); +#20411 = CARTESIAN_POINT('',(2.25E-02,8.39711431703E-02)); +#20412 = CARTESIAN_POINT('',(9.E-02,0.122942286341)); +#20413 = CARTESIAN_POINT('',(9.E-02,4.5E-02)); +#20414 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20415 = PCURVE('',#20298,#20416); +#20416 = DEFINITIONAL_REPRESENTATION('',(#20417),#20421); +#20417 = LINE('',#20418,#20419); +#20418 = CARTESIAN_POINT('',(7.853981633974,0.)); +#20419 = VECTOR('',#20420,1.); +#20420 = DIRECTION('',(-1.,0.)); +#20421 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20422 = ORIENTED_EDGE('',*,*,#20247,.T.); +#20423 = ORIENTED_EDGE('',*,*,#20424,.T.); +#20424 = EDGE_CURVE('',#20250,#20425,#20427,.T.); +#20425 = VERTEX_POINT('',#20426); +#20426 = CARTESIAN_POINT('',(-0.955,-0.6,0.45)); +#20427 = SURFACE_CURVE('',#20428,(#20433,#20440),.PCURVE_S1.); +#20428 = CIRCLE('',#20429,4.5E-02); +#20429 = AXIS2_PLACEMENT_3D('',#20430,#20431,#20432); +#20430 = CARTESIAN_POINT('',(-0.955,-0.6,0.405)); +#20431 = DIRECTION('',(0.,1.,0.)); +#20432 = DIRECTION('',(0.,-0.,1.)); +#20433 = PCURVE('',#20270,#20434); +#20434 = DEFINITIONAL_REPRESENTATION('',(#20435),#20439); +#20435 = CIRCLE('',#20436,4.5E-02); +#20436 = AXIS2_PLACEMENT_2D('',#20437,#20438); +#20437 = CARTESIAN_POINT('',(0.405,4.5E-02)); +#20438 = DIRECTION('',(1.,0.)); +#20439 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20440 = PCURVE('',#20352,#20441); +#20441 = DEFINITIONAL_REPRESENTATION('',(#20442),#20446); +#20442 = LINE('',#20443,#20444); +#20443 = CARTESIAN_POINT('',(-4.712388980385,0.)); +#20444 = VECTOR('',#20445,1.); +#20445 = DIRECTION('',(1.,0.)); +#20446 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20447 = ORIENTED_EDGE('',*,*,#20448,.T.); +#20448 = EDGE_CURVE('',#20425,#20449,#20451,.T.); +#20449 = VERTEX_POINT('',#20450); +#20450 = CARTESIAN_POINT('',(-0.745,-0.6,0.45)); +#20451 = SURFACE_CURVE('',#20452,(#20456,#20463),.PCURVE_S1.); +#20452 = LINE('',#20453,#20454); +#20453 = CARTESIAN_POINT('',(-1.,-0.6,0.45)); +#20454 = VECTOR('',#20455,1.); +#20455 = DIRECTION('',(1.,0.,0.)); +#20456 = PCURVE('',#20270,#20457); +#20457 = DEFINITIONAL_REPRESENTATION('',(#20458),#20462); +#20458 = LINE('',#20459,#20460); +#20459 = CARTESIAN_POINT('',(0.45,0.)); +#20460 = VECTOR('',#20461,1.); +#20461 = DIRECTION('',(0.,1.)); +#20462 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20463 = PCURVE('',#20464,#20469); +#20464 = PLANE('',#20465); +#20465 = AXIS2_PLACEMENT_3D('',#20466,#20467,#20468); +#20466 = CARTESIAN_POINT('',(-1.,-0.6,0.45)); +#20467 = DIRECTION('',(0.,0.,1.)); +#20468 = DIRECTION('',(1.,0.,-0.)); +#20469 = DEFINITIONAL_REPRESENTATION('',(#20470),#20474); +#20470 = LINE('',#20471,#20472); +#20471 = CARTESIAN_POINT('',(0.,0.)); +#20472 = VECTOR('',#20473,1.); +#20473 = DIRECTION('',(1.,0.)); +#20474 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20475 = ORIENTED_EDGE('',*,*,#20476,.F.); +#20476 = EDGE_CURVE('',#20477,#20449,#20479,.T.); +#20477 = VERTEX_POINT('',#20478); +#20478 = CARTESIAN_POINT('',(-0.7,-0.6,0.405)); +#20479 = SURFACE_CURVE('',#20480,(#20485,#20496),.PCURVE_S1.); +#20480 = CIRCLE('',#20481,4.5E-02); +#20481 = AXIS2_PLACEMENT_3D('',#20482,#20483,#20484); +#20482 = CARTESIAN_POINT('',(-0.745,-0.6,0.405)); +#20483 = DIRECTION('',(0.,-1.,0.)); +#20484 = DIRECTION('',(0.,0.,1.)); +#20485 = PCURVE('',#20270,#20486); +#20486 = DEFINITIONAL_REPRESENTATION('',(#20487),#20495); +#20487 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#20488,#20489,#20490,#20491 + ,#20492,#20493,#20494),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#20488 = CARTESIAN_POINT('',(0.45,0.255)); +#20489 = CARTESIAN_POINT('',(0.45,0.177057713659)); +#20490 = CARTESIAN_POINT('',(0.3825,0.21602885683)); +#20491 = CARTESIAN_POINT('',(0.315,0.255)); +#20492 = CARTESIAN_POINT('',(0.3825,0.29397114317)); +#20493 = CARTESIAN_POINT('',(0.45,0.332942286341)); +#20494 = CARTESIAN_POINT('',(0.45,0.255)); +#20495 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20496 = PCURVE('',#20497,#20502); +#20497 = CYLINDRICAL_SURFACE('',#20498,4.5E-02); +#20498 = AXIS2_PLACEMENT_3D('',#20499,#20500,#20501); +#20499 = CARTESIAN_POINT('',(-0.745,-0.6,0.405)); +#20500 = DIRECTION('',(0.,1.,0.)); +#20501 = DIRECTION('',(1.,0.,0.)); +#20502 = DEFINITIONAL_REPRESENTATION('',(#20503),#20507); +#20503 = LINE('',#20504,#20505); +#20504 = CARTESIAN_POINT('',(10.995574287564,0.)); +#20505 = VECTOR('',#20506,1.); +#20506 = DIRECTION('',(-1.,0.)); +#20507 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20508 = ORIENTED_EDGE('',*,*,#20509,.F.); +#20509 = EDGE_CURVE('',#20510,#20477,#20512,.T.); +#20510 = VERTEX_POINT('',#20511); +#20511 = CARTESIAN_POINT('',(-0.955,-0.6,0.405)); +#20512 = SURFACE_CURVE('',#20513,(#20517,#20524),.PCURVE_S1.); +#20513 = LINE('',#20514,#20515); +#20514 = CARTESIAN_POINT('',(-0.955,-0.6,0.405)); +#20515 = VECTOR('',#20516,1.); +#20516 = DIRECTION('',(1.,0.,0.)); +#20517 = PCURVE('',#20270,#20518); +#20518 = DEFINITIONAL_REPRESENTATION('',(#20519),#20523); +#20519 = LINE('',#20520,#20521); +#20520 = CARTESIAN_POINT('',(0.405,4.5E-02)); +#20521 = VECTOR('',#20522,1.); +#20522 = DIRECTION('',(0.,1.)); +#20523 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20524 = PCURVE('',#20525,#20530); +#20525 = PLANE('',#20526); +#20526 = AXIS2_PLACEMENT_3D('',#20527,#20528,#20529); +#20527 = CARTESIAN_POINT('',(-0.955,-0.6,4.5E-02)); +#20528 = DIRECTION('',(0.,1.,0.)); +#20529 = DIRECTION('',(0.,-0.,1.)); +#20530 = DEFINITIONAL_REPRESENTATION('',(#20531),#20535); +#20531 = LINE('',#20532,#20533); +#20532 = CARTESIAN_POINT('',(0.36,0.)); +#20533 = VECTOR('',#20534,1.); +#20534 = DIRECTION('',(0.,1.)); +#20535 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20536 = ORIENTED_EDGE('',*,*,#20537,.F.); +#20537 = EDGE_CURVE('',#20538,#20510,#20540,.T.); +#20538 = VERTEX_POINT('',#20539); +#20539 = CARTESIAN_POINT('',(-0.955,-0.6,4.5E-02)); +#20540 = SURFACE_CURVE('',#20541,(#20545,#20552),.PCURVE_S1.); +#20541 = LINE('',#20542,#20543); +#20542 = CARTESIAN_POINT('',(-0.955,-0.6,4.5E-02)); +#20543 = VECTOR('',#20544,1.); +#20544 = DIRECTION('',(0.,0.,1.)); +#20545 = PCURVE('',#20270,#20546); +#20546 = DEFINITIONAL_REPRESENTATION('',(#20547),#20551); +#20547 = LINE('',#20548,#20549); +#20548 = CARTESIAN_POINT('',(4.5E-02,4.5E-02)); +#20549 = VECTOR('',#20550,1.); +#20550 = DIRECTION('',(1.,0.)); +#20551 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20552 = PCURVE('',#20525,#20553); +#20553 = DEFINITIONAL_REPRESENTATION('',(#20554),#20558); +#20554 = LINE('',#20555,#20556); +#20555 = CARTESIAN_POINT('',(0.,0.)); +#20556 = VECTOR('',#20557,1.); +#20557 = DIRECTION('',(1.,0.)); +#20558 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20559 = ORIENTED_EDGE('',*,*,#20560,.T.); +#20560 = EDGE_CURVE('',#20538,#20561,#20563,.T.); +#20561 = VERTEX_POINT('',#20562); +#20562 = CARTESIAN_POINT('',(-0.7,-0.6,4.5E-02)); +#20563 = SURFACE_CURVE('',#20564,(#20568,#20575),.PCURVE_S1.); +#20564 = LINE('',#20565,#20566); +#20565 = CARTESIAN_POINT('',(-0.955,-0.6,4.5E-02)); +#20566 = VECTOR('',#20567,1.); +#20567 = DIRECTION('',(1.,0.,0.)); +#20568 = PCURVE('',#20270,#20569); +#20569 = DEFINITIONAL_REPRESENTATION('',(#20570),#20574); +#20570 = LINE('',#20571,#20572); +#20571 = CARTESIAN_POINT('',(4.5E-02,4.5E-02)); +#20572 = VECTOR('',#20573,1.); +#20573 = DIRECTION('',(0.,1.)); +#20574 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20575 = PCURVE('',#20525,#20576); +#20576 = DEFINITIONAL_REPRESENTATION('',(#20577),#20581); +#20577 = LINE('',#20578,#20579); +#20578 = CARTESIAN_POINT('',(0.,0.)); +#20579 = VECTOR('',#20580,1.); +#20580 = DIRECTION('',(0.,1.)); +#20581 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20582 = ORIENTED_EDGE('',*,*,#20583,.T.); +#20583 = EDGE_CURVE('',#20561,#20370,#20584,.T.); +#20584 = SURFACE_CURVE('',#20585,(#20590,#20597),.PCURVE_S1.); +#20585 = CIRCLE('',#20586,4.5E-02); +#20586 = AXIS2_PLACEMENT_3D('',#20587,#20588,#20589); +#20587 = CARTESIAN_POINT('',(-0.745,-0.6,4.5E-02)); +#20588 = DIRECTION('',(0.,1.,0.)); +#20589 = DIRECTION('',(0.,-0.,1.)); +#20590 = PCURVE('',#20270,#20591); +#20591 = DEFINITIONAL_REPRESENTATION('',(#20592),#20596); +#20592 = CIRCLE('',#20593,4.5E-02); +#20593 = AXIS2_PLACEMENT_2D('',#20594,#20595); +#20594 = CARTESIAN_POINT('',(4.5E-02,0.255)); +#20595 = DIRECTION('',(1.,0.)); +#20596 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20597 = PCURVE('',#20598,#20603); +#20598 = CYLINDRICAL_SURFACE('',#20599,4.5E-02); +#20599 = AXIS2_PLACEMENT_3D('',#20600,#20601,#20602); +#20600 = CARTESIAN_POINT('',(-0.745,-0.6,4.5E-02)); +#20601 = DIRECTION('',(0.,1.,0.)); +#20602 = DIRECTION('',(1.,0.,0.)); +#20603 = DEFINITIONAL_REPRESENTATION('',(#20604),#20608); +#20604 = LINE('',#20605,#20606); +#20605 = CARTESIAN_POINT('',(-1.570796326795,0.)); +#20606 = VECTOR('',#20607,1.); +#20607 = DIRECTION('',(1.,0.)); +#20608 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20609 = ADVANCED_FACE('',(#20610),#20298,.T.); +#20610 = FACE_BOUND('',#20611,.T.); +#20611 = EDGE_LOOP('',(#20612,#20613,#20641,#20662)); +#20612 = ORIENTED_EDGE('',*,*,#20282,.T.); +#20613 = ORIENTED_EDGE('',*,*,#20614,.T.); +#20614 = EDGE_CURVE('',#20283,#20615,#20617,.T.); +#20615 = VERTEX_POINT('',#20616); +#20616 = CARTESIAN_POINT('',(-0.955,0.6,-2.775557561563E-17)); +#20617 = SURFACE_CURVE('',#20618,(#20623,#20630),.PCURVE_S1.); +#20618 = CIRCLE('',#20619,4.5E-02); +#20619 = AXIS2_PLACEMENT_3D('',#20620,#20621,#20622); +#20620 = CARTESIAN_POINT('',(-0.955,0.6,4.5E-02)); +#20621 = DIRECTION('',(0.,-1.,0.)); +#20622 = DIRECTION('',(0.,0.,1.)); +#20623 = PCURVE('',#20298,#20624); +#20624 = DEFINITIONAL_REPRESENTATION('',(#20625),#20629); +#20625 = LINE('',#20626,#20627); +#20626 = CARTESIAN_POINT('',(7.853981633974,1.2)); +#20627 = VECTOR('',#20628,1.); +#20628 = DIRECTION('',(-1.,0.)); +#20629 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20630 = PCURVE('',#20326,#20631); +#20631 = DEFINITIONAL_REPRESENTATION('',(#20632),#20640); +#20632 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#20633,#20634,#20635,#20636 + ,#20637,#20638,#20639),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#20633 = CARTESIAN_POINT('',(9.E-02,4.5E-02)); +#20634 = CARTESIAN_POINT('',(9.E-02,-3.29422863406E-02)); +#20635 = CARTESIAN_POINT('',(2.25E-02,6.0288568297E-03)); +#20636 = CARTESIAN_POINT('',(-4.5E-02,4.5E-02)); +#20637 = CARTESIAN_POINT('',(2.25E-02,8.39711431703E-02)); +#20638 = CARTESIAN_POINT('',(9.E-02,0.122942286341)); +#20639 = CARTESIAN_POINT('',(9.E-02,4.5E-02)); +#20640 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20641 = ORIENTED_EDGE('',*,*,#20642,.F.); +#20642 = EDGE_CURVE('',#20368,#20615,#20643,.T.); +#20643 = SURFACE_CURVE('',#20644,(#20648,#20655),.PCURVE_S1.); +#20644 = LINE('',#20645,#20646); +#20645 = CARTESIAN_POINT('',(-0.955,-0.6,-2.775557561563E-17)); +#20646 = VECTOR('',#20647,1.); +#20647 = DIRECTION('',(0.,1.,0.)); +#20648 = PCURVE('',#20298,#20649); +#20649 = DEFINITIONAL_REPRESENTATION('',(#20650),#20654); +#20650 = LINE('',#20651,#20652); +#20651 = CARTESIAN_POINT('',(4.712388980385,0.)); +#20652 = VECTOR('',#20653,1.); +#20653 = DIRECTION('',(0.,1.)); +#20654 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20655 = PCURVE('',#20385,#20656); +#20656 = DEFINITIONAL_REPRESENTATION('',(#20657),#20661); +#20657 = LINE('',#20658,#20659); +#20658 = CARTESIAN_POINT('',(4.5E-02,0.)); +#20659 = VECTOR('',#20660,1.); +#20660 = DIRECTION('',(0.,1.)); +#20661 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20662 = ORIENTED_EDGE('',*,*,#20397,.F.); +#20663 = ADVANCED_FACE('',(#20664),#20352,.T.); +#20664 = FACE_BOUND('',#20665,.T.); +#20665 = EDGE_LOOP('',(#20666,#20667,#20690,#20712)); +#20666 = ORIENTED_EDGE('',*,*,#20424,.T.); +#20667 = ORIENTED_EDGE('',*,*,#20668,.T.); +#20668 = EDGE_CURVE('',#20425,#20669,#20671,.T.); +#20669 = VERTEX_POINT('',#20670); +#20670 = CARTESIAN_POINT('',(-0.955,0.6,0.45)); +#20671 = SURFACE_CURVE('',#20672,(#20676,#20683),.PCURVE_S1.); +#20672 = LINE('',#20673,#20674); +#20673 = CARTESIAN_POINT('',(-0.955,-0.6,0.45)); +#20674 = VECTOR('',#20675,1.); +#20675 = DIRECTION('',(0.,1.,0.)); +#20676 = PCURVE('',#20352,#20677); +#20677 = DEFINITIONAL_REPRESENTATION('',(#20678),#20682); +#20678 = LINE('',#20679,#20680); +#20679 = CARTESIAN_POINT('',(1.570796326795,0.)); +#20680 = VECTOR('',#20681,1.); +#20681 = DIRECTION('',(0.,1.)); +#20682 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20683 = PCURVE('',#20464,#20684); +#20684 = DEFINITIONAL_REPRESENTATION('',(#20685),#20689); +#20685 = LINE('',#20686,#20687); +#20686 = CARTESIAN_POINT('',(4.5E-02,0.)); +#20687 = VECTOR('',#20688,1.); +#20688 = DIRECTION('',(0.,1.)); +#20689 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20690 = ORIENTED_EDGE('',*,*,#20691,.F.); +#20691 = EDGE_CURVE('',#20311,#20669,#20692,.T.); +#20692 = SURFACE_CURVE('',#20693,(#20698,#20705),.PCURVE_S1.); +#20693 = CIRCLE('',#20694,4.5E-02); +#20694 = AXIS2_PLACEMENT_3D('',#20695,#20696,#20697); +#20695 = CARTESIAN_POINT('',(-0.955,0.6,0.405)); +#20696 = DIRECTION('',(0.,1.,0.)); +#20697 = DIRECTION('',(0.,-0.,1.)); +#20698 = PCURVE('',#20352,#20699); +#20699 = DEFINITIONAL_REPRESENTATION('',(#20700),#20704); +#20700 = LINE('',#20701,#20702); +#20701 = CARTESIAN_POINT('',(-4.712388980385,1.2)); +#20702 = VECTOR('',#20703,1.); +#20703 = DIRECTION('',(1.,0.)); +#20704 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20705 = PCURVE('',#20326,#20706); +#20706 = DEFINITIONAL_REPRESENTATION('',(#20707),#20711); +#20707 = CIRCLE('',#20708,4.5E-02); +#20708 = AXIS2_PLACEMENT_2D('',#20709,#20710); +#20709 = CARTESIAN_POINT('',(0.405,4.5E-02)); +#20710 = DIRECTION('',(1.,0.)); +#20711 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20712 = ORIENTED_EDGE('',*,*,#20338,.F.); +#20713 = ADVANCED_FACE('',(#20714),#20326,.T.); +#20714 = FACE_BOUND('',#20715,.T.); +#20715 = EDGE_LOOP('',(#20716,#20739,#20740,#20741,#20742,#20765,#20793, + #20821,#20844,#20867)); +#20716 = ORIENTED_EDGE('',*,*,#20717,.F.); +#20717 = EDGE_CURVE('',#20615,#20718,#20720,.T.); +#20718 = VERTEX_POINT('',#20719); +#20719 = CARTESIAN_POINT('',(-0.745,0.6,-2.775557561563E-17)); +#20720 = SURFACE_CURVE('',#20721,(#20725,#20732),.PCURVE_S1.); +#20721 = LINE('',#20722,#20723); +#20722 = CARTESIAN_POINT('',(-1.,0.6,0.)); +#20723 = VECTOR('',#20724,1.); +#20724 = DIRECTION('',(1.,0.,0.)); +#20725 = PCURVE('',#20326,#20726); +#20726 = DEFINITIONAL_REPRESENTATION('',(#20727),#20731); +#20727 = LINE('',#20728,#20729); +#20728 = CARTESIAN_POINT('',(0.,0.)); +#20729 = VECTOR('',#20730,1.); +#20730 = DIRECTION('',(0.,1.)); +#20731 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20732 = PCURVE('',#20385,#20733); +#20733 = DEFINITIONAL_REPRESENTATION('',(#20734),#20738); +#20734 = LINE('',#20735,#20736); +#20735 = CARTESIAN_POINT('',(0.,1.2)); +#20736 = VECTOR('',#20737,1.); +#20737 = DIRECTION('',(1.,0.)); +#20738 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20739 = ORIENTED_EDGE('',*,*,#20614,.F.); +#20740 = ORIENTED_EDGE('',*,*,#20310,.T.); +#20741 = ORIENTED_EDGE('',*,*,#20691,.T.); +#20742 = ORIENTED_EDGE('',*,*,#20743,.T.); +#20743 = EDGE_CURVE('',#20669,#20744,#20746,.T.); +#20744 = VERTEX_POINT('',#20745); +#20745 = CARTESIAN_POINT('',(-0.745,0.6,0.45)); +#20746 = SURFACE_CURVE('',#20747,(#20751,#20758),.PCURVE_S1.); +#20747 = LINE('',#20748,#20749); +#20748 = CARTESIAN_POINT('',(-1.,0.6,0.45)); +#20749 = VECTOR('',#20750,1.); +#20750 = DIRECTION('',(1.,0.,0.)); +#20751 = PCURVE('',#20326,#20752); +#20752 = DEFINITIONAL_REPRESENTATION('',(#20753),#20757); +#20753 = LINE('',#20754,#20755); +#20754 = CARTESIAN_POINT('',(0.45,0.)); +#20755 = VECTOR('',#20756,1.); +#20756 = DIRECTION('',(0.,1.)); +#20757 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20758 = PCURVE('',#20464,#20759); +#20759 = DEFINITIONAL_REPRESENTATION('',(#20760),#20764); +#20760 = LINE('',#20761,#20762); +#20761 = CARTESIAN_POINT('',(0.,1.2)); +#20762 = VECTOR('',#20763,1.); +#20763 = DIRECTION('',(1.,0.)); +#20764 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20765 = ORIENTED_EDGE('',*,*,#20766,.F.); +#20766 = EDGE_CURVE('',#20767,#20744,#20769,.T.); +#20767 = VERTEX_POINT('',#20768); +#20768 = CARTESIAN_POINT('',(-0.7,0.6,0.405)); +#20769 = SURFACE_CURVE('',#20770,(#20775,#20786),.PCURVE_S1.); +#20770 = CIRCLE('',#20771,4.5E-02); +#20771 = AXIS2_PLACEMENT_3D('',#20772,#20773,#20774); +#20772 = CARTESIAN_POINT('',(-0.745,0.6,0.405)); +#20773 = DIRECTION('',(0.,-1.,0.)); +#20774 = DIRECTION('',(0.,0.,1.)); +#20775 = PCURVE('',#20326,#20776); +#20776 = DEFINITIONAL_REPRESENTATION('',(#20777),#20785); +#20777 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#20778,#20779,#20780,#20781 + ,#20782,#20783,#20784),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#20778 = CARTESIAN_POINT('',(0.45,0.255)); +#20779 = CARTESIAN_POINT('',(0.45,0.177057713659)); +#20780 = CARTESIAN_POINT('',(0.3825,0.21602885683)); +#20781 = CARTESIAN_POINT('',(0.315,0.255)); +#20782 = CARTESIAN_POINT('',(0.3825,0.29397114317)); +#20783 = CARTESIAN_POINT('',(0.45,0.332942286341)); +#20784 = CARTESIAN_POINT('',(0.45,0.255)); +#20785 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20786 = PCURVE('',#20497,#20787); +#20787 = DEFINITIONAL_REPRESENTATION('',(#20788),#20792); +#20788 = LINE('',#20789,#20790); +#20789 = CARTESIAN_POINT('',(10.995574287564,1.2)); +#20790 = VECTOR('',#20791,1.); +#20791 = DIRECTION('',(-1.,0.)); +#20792 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20793 = ORIENTED_EDGE('',*,*,#20794,.F.); +#20794 = EDGE_CURVE('',#20795,#20767,#20797,.T.); +#20795 = VERTEX_POINT('',#20796); +#20796 = CARTESIAN_POINT('',(-0.955,0.6,0.405)); +#20797 = SURFACE_CURVE('',#20798,(#20802,#20809),.PCURVE_S1.); +#20798 = LINE('',#20799,#20800); +#20799 = CARTESIAN_POINT('',(-0.955,0.6,0.405)); +#20800 = VECTOR('',#20801,1.); +#20801 = DIRECTION('',(1.,0.,0.)); +#20802 = PCURVE('',#20326,#20803); +#20803 = DEFINITIONAL_REPRESENTATION('',(#20804),#20808); +#20804 = LINE('',#20805,#20806); +#20805 = CARTESIAN_POINT('',(0.405,4.5E-02)); +#20806 = VECTOR('',#20807,1.); +#20807 = DIRECTION('',(0.,1.)); +#20808 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20809 = PCURVE('',#20810,#20815); +#20810 = PLANE('',#20811); +#20811 = AXIS2_PLACEMENT_3D('',#20812,#20813,#20814); +#20812 = CARTESIAN_POINT('',(-0.955,0.6,4.5E-02)); +#20813 = DIRECTION('',(0.,1.,0.)); +#20814 = DIRECTION('',(0.,-0.,1.)); +#20815 = DEFINITIONAL_REPRESENTATION('',(#20816),#20820); +#20816 = LINE('',#20817,#20818); +#20817 = CARTESIAN_POINT('',(0.36,0.)); +#20818 = VECTOR('',#20819,1.); +#20819 = DIRECTION('',(0.,1.)); +#20820 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20821 = ORIENTED_EDGE('',*,*,#20822,.F.); +#20822 = EDGE_CURVE('',#20823,#20795,#20825,.T.); +#20823 = VERTEX_POINT('',#20824); +#20824 = CARTESIAN_POINT('',(-0.955,0.6,4.5E-02)); +#20825 = SURFACE_CURVE('',#20826,(#20830,#20837),.PCURVE_S1.); +#20826 = LINE('',#20827,#20828); +#20827 = CARTESIAN_POINT('',(-0.955,0.6,4.5E-02)); +#20828 = VECTOR('',#20829,1.); +#20829 = DIRECTION('',(0.,0.,1.)); +#20830 = PCURVE('',#20326,#20831); +#20831 = DEFINITIONAL_REPRESENTATION('',(#20832),#20836); +#20832 = LINE('',#20833,#20834); +#20833 = CARTESIAN_POINT('',(4.5E-02,4.5E-02)); +#20834 = VECTOR('',#20835,1.); +#20835 = DIRECTION('',(1.,0.)); +#20836 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20837 = PCURVE('',#20810,#20838); +#20838 = DEFINITIONAL_REPRESENTATION('',(#20839),#20843); +#20839 = LINE('',#20840,#20841); +#20840 = CARTESIAN_POINT('',(0.,0.)); +#20841 = VECTOR('',#20842,1.); +#20842 = DIRECTION('',(1.,0.)); +#20843 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20844 = ORIENTED_EDGE('',*,*,#20845,.T.); +#20845 = EDGE_CURVE('',#20823,#20846,#20848,.T.); +#20846 = VERTEX_POINT('',#20847); +#20847 = CARTESIAN_POINT('',(-0.7,0.6,4.5E-02)); +#20848 = SURFACE_CURVE('',#20849,(#20853,#20860),.PCURVE_S1.); +#20849 = LINE('',#20850,#20851); +#20850 = CARTESIAN_POINT('',(-0.955,0.6,4.5E-02)); +#20851 = VECTOR('',#20852,1.); +#20852 = DIRECTION('',(1.,0.,0.)); +#20853 = PCURVE('',#20326,#20854); +#20854 = DEFINITIONAL_REPRESENTATION('',(#20855),#20859); +#20855 = LINE('',#20856,#20857); +#20856 = CARTESIAN_POINT('',(4.5E-02,4.5E-02)); +#20857 = VECTOR('',#20858,1.); +#20858 = DIRECTION('',(0.,1.)); +#20859 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20860 = PCURVE('',#20810,#20861); +#20861 = DEFINITIONAL_REPRESENTATION('',(#20862),#20866); +#20862 = LINE('',#20863,#20864); +#20863 = CARTESIAN_POINT('',(0.,0.)); +#20864 = VECTOR('',#20865,1.); +#20865 = DIRECTION('',(0.,1.)); +#20866 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20867 = ORIENTED_EDGE('',*,*,#20868,.T.); +#20868 = EDGE_CURVE('',#20846,#20718,#20869,.T.); +#20869 = SURFACE_CURVE('',#20870,(#20875,#20882),.PCURVE_S1.); +#20870 = CIRCLE('',#20871,4.5E-02); +#20871 = AXIS2_PLACEMENT_3D('',#20872,#20873,#20874); +#20872 = CARTESIAN_POINT('',(-0.745,0.6,4.5E-02)); +#20873 = DIRECTION('',(0.,1.,0.)); +#20874 = DIRECTION('',(0.,-0.,1.)); +#20875 = PCURVE('',#20326,#20876); +#20876 = DEFINITIONAL_REPRESENTATION('',(#20877),#20881); +#20877 = CIRCLE('',#20878,4.5E-02); +#20878 = AXIS2_PLACEMENT_2D('',#20879,#20880); +#20879 = CARTESIAN_POINT('',(4.5E-02,0.255)); +#20880 = DIRECTION('',(1.,0.)); +#20881 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20882 = PCURVE('',#20598,#20883); +#20883 = DEFINITIONAL_REPRESENTATION('',(#20884),#20888); +#20884 = LINE('',#20885,#20886); +#20885 = CARTESIAN_POINT('',(-1.570796326795,1.2)); +#20886 = VECTOR('',#20887,1.); +#20887 = DIRECTION('',(1.,0.)); +#20888 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20889 = ADVANCED_FACE('',(#20890),#20385,.F.); +#20890 = FACE_BOUND('',#20891,.F.); +#20891 = EDGE_LOOP('',(#20892,#20893,#20894,#20895)); +#20892 = ORIENTED_EDGE('',*,*,#20717,.F.); +#20893 = ORIENTED_EDGE('',*,*,#20642,.F.); +#20894 = ORIENTED_EDGE('',*,*,#20367,.T.); +#20895 = ORIENTED_EDGE('',*,*,#20896,.T.); +#20896 = EDGE_CURVE('',#20370,#20718,#20897,.T.); +#20897 = SURFACE_CURVE('',#20898,(#20902,#20909),.PCURVE_S1.); +#20898 = LINE('',#20899,#20900); +#20899 = CARTESIAN_POINT('',(-0.745,-0.6,-2.775557561563E-17)); +#20900 = VECTOR('',#20901,1.); +#20901 = DIRECTION('',(0.,1.,0.)); +#20902 = PCURVE('',#20385,#20903); +#20903 = DEFINITIONAL_REPRESENTATION('',(#20904),#20908); +#20904 = LINE('',#20905,#20906); +#20905 = CARTESIAN_POINT('',(0.255,0.)); +#20906 = VECTOR('',#20907,1.); +#20907 = DIRECTION('',(0.,1.)); +#20908 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20909 = PCURVE('',#20598,#20910); +#20910 = DEFINITIONAL_REPRESENTATION('',(#20911),#20915); +#20911 = LINE('',#20912,#20913); +#20912 = CARTESIAN_POINT('',(1.570796326795,0.)); +#20913 = VECTOR('',#20914,1.); +#20914 = DIRECTION('',(0.,1.)); +#20915 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20916 = ADVANCED_FACE('',(#20917),#20598,.T.); +#20917 = FACE_BOUND('',#20918,.T.); +#20918 = EDGE_LOOP('',(#20919,#20920,#20921,#20922)); +#20919 = ORIENTED_EDGE('',*,*,#20583,.T.); +#20920 = ORIENTED_EDGE('',*,*,#20896,.T.); +#20921 = ORIENTED_EDGE('',*,*,#20868,.F.); +#20922 = ORIENTED_EDGE('',*,*,#20923,.F.); +#20923 = EDGE_CURVE('',#20561,#20846,#20924,.T.); +#20924 = SURFACE_CURVE('',#20925,(#20929,#20936),.PCURVE_S1.); +#20925 = LINE('',#20926,#20927); +#20926 = CARTESIAN_POINT('',(-0.7,-0.6,4.5E-02)); +#20927 = VECTOR('',#20928,1.); +#20928 = DIRECTION('',(0.,1.,0.)); +#20929 = PCURVE('',#20598,#20930); +#20930 = DEFINITIONAL_REPRESENTATION('',(#20931),#20935); +#20931 = LINE('',#20932,#20933); +#20932 = CARTESIAN_POINT('',(0.,0.)); +#20933 = VECTOR('',#20934,1.); +#20934 = DIRECTION('',(0.,1.)); +#20935 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20936 = PCURVE('',#20937,#20942); +#20937 = PLANE('',#20938); +#20938 = AXIS2_PLACEMENT_3D('',#20939,#20940,#20941); +#20939 = CARTESIAN_POINT('',(-0.955,-0.6,4.5E-02)); +#20940 = DIRECTION('',(0.,0.,1.)); +#20941 = DIRECTION('',(1.,0.,-0.)); +#20942 = DEFINITIONAL_REPRESENTATION('',(#20943),#20947); +#20943 = LINE('',#20944,#20945); +#20944 = CARTESIAN_POINT('',(0.255,0.)); +#20945 = VECTOR('',#20946,1.); +#20946 = DIRECTION('',(0.,1.)); +#20947 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20948 = ADVANCED_FACE('',(#20949),#20525,.F.); +#20949 = FACE_BOUND('',#20950,.F.); +#20950 = EDGE_LOOP('',(#20951,#20952,#20953,#20954,#20982,#21010,#21033, + #21056)); +#20951 = ORIENTED_EDGE('',*,*,#20560,.F.); +#20952 = ORIENTED_EDGE('',*,*,#20537,.T.); +#20953 = ORIENTED_EDGE('',*,*,#20509,.T.); +#20954 = ORIENTED_EDGE('',*,*,#20955,.T.); +#20955 = EDGE_CURVE('',#20477,#20956,#20958,.T.); +#20956 = VERTEX_POINT('',#20957); +#20957 = CARTESIAN_POINT('',(0.7,-0.6,0.405)); +#20958 = SURFACE_CURVE('',#20959,(#20963,#20970),.PCURVE_S1.); +#20959 = LINE('',#20960,#20961); +#20960 = CARTESIAN_POINT('',(-0.7,-0.6,0.405)); +#20961 = VECTOR('',#20962,1.); +#20962 = DIRECTION('',(1.,0.,0.)); +#20963 = PCURVE('',#20525,#20964); +#20964 = DEFINITIONAL_REPRESENTATION('',(#20965),#20969); +#20965 = LINE('',#20966,#20967); +#20966 = CARTESIAN_POINT('',(0.36,0.255)); +#20967 = VECTOR('',#20968,1.); +#20968 = DIRECTION('',(0.,1.)); +#20969 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20970 = PCURVE('',#20971,#20976); +#20971 = PLANE('',#20972); +#20972 = AXIS2_PLACEMENT_3D('',#20973,#20974,#20975); +#20973 = CARTESIAN_POINT('',(-0.7,-0.6,0.405)); +#20974 = DIRECTION('',(0.,1.,0.)); +#20975 = DIRECTION('',(0.,-0.,1.)); +#20976 = DEFINITIONAL_REPRESENTATION('',(#20977),#20981); +#20977 = LINE('',#20978,#20979); +#20978 = CARTESIAN_POINT('',(0.,0.)); +#20979 = VECTOR('',#20980,1.); +#20980 = DIRECTION('',(0.,1.)); +#20981 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20982 = ORIENTED_EDGE('',*,*,#20983,.T.); +#20983 = EDGE_CURVE('',#20956,#20984,#20986,.T.); +#20984 = VERTEX_POINT('',#20985); +#20985 = CARTESIAN_POINT('',(0.955,-0.6,0.405)); +#20986 = SURFACE_CURVE('',#20987,(#20991,#20998),.PCURVE_S1.); +#20987 = LINE('',#20988,#20989); +#20988 = CARTESIAN_POINT('',(-0.955,-0.6,0.405)); +#20989 = VECTOR('',#20990,1.); +#20990 = DIRECTION('',(1.,0.,0.)); +#20991 = PCURVE('',#20525,#20992); +#20992 = DEFINITIONAL_REPRESENTATION('',(#20993),#20997); +#20993 = LINE('',#20994,#20995); +#20994 = CARTESIAN_POINT('',(0.36,0.)); +#20995 = VECTOR('',#20996,1.); +#20996 = DIRECTION('',(0.,1.)); +#20997 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#20998 = PCURVE('',#20999,#21004); +#20999 = PLANE('',#21000); +#21000 = AXIS2_PLACEMENT_3D('',#21001,#21002,#21003); +#21001 = CARTESIAN_POINT('',(0.7,-0.6,0.)); +#21002 = DIRECTION('',(0.,1.,0.)); +#21003 = DIRECTION('',(0.,-0.,1.)); +#21004 = DEFINITIONAL_REPRESENTATION('',(#21005),#21009); +#21005 = LINE('',#21006,#21007); +#21006 = CARTESIAN_POINT('',(0.405,-1.655)); +#21007 = VECTOR('',#21008,1.); +#21008 = DIRECTION('',(0.,1.)); +#21009 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21010 = ORIENTED_EDGE('',*,*,#21011,.F.); +#21011 = EDGE_CURVE('',#21012,#20984,#21014,.T.); +#21012 = VERTEX_POINT('',#21013); +#21013 = CARTESIAN_POINT('',(0.955,-0.6,4.5E-02)); +#21014 = SURFACE_CURVE('',#21015,(#21019,#21026),.PCURVE_S1.); +#21015 = LINE('',#21016,#21017); +#21016 = CARTESIAN_POINT('',(0.955,-0.6,4.5E-02)); +#21017 = VECTOR('',#21018,1.); +#21018 = DIRECTION('',(0.,0.,1.)); +#21019 = PCURVE('',#20525,#21020); +#21020 = DEFINITIONAL_REPRESENTATION('',(#21021),#21025); +#21021 = LINE('',#21022,#21023); +#21022 = CARTESIAN_POINT('',(0.,1.91)); +#21023 = VECTOR('',#21024,1.); +#21024 = DIRECTION('',(1.,0.)); +#21025 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21026 = PCURVE('',#20999,#21027); +#21027 = DEFINITIONAL_REPRESENTATION('',(#21028),#21032); +#21028 = LINE('',#21029,#21030); +#21029 = CARTESIAN_POINT('',(4.5E-02,0.255)); +#21030 = VECTOR('',#21031,1.); +#21031 = DIRECTION('',(1.,0.)); +#21032 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21033 = ORIENTED_EDGE('',*,*,#21034,.F.); +#21034 = EDGE_CURVE('',#21035,#21012,#21037,.T.); +#21035 = VERTEX_POINT('',#21036); +#21036 = CARTESIAN_POINT('',(0.7,-0.6,4.5E-02)); +#21037 = SURFACE_CURVE('',#21038,(#21042,#21049),.PCURVE_S1.); +#21038 = LINE('',#21039,#21040); +#21039 = CARTESIAN_POINT('',(-0.955,-0.6,4.5E-02)); +#21040 = VECTOR('',#21041,1.); +#21041 = DIRECTION('',(1.,0.,0.)); +#21042 = PCURVE('',#20525,#21043); +#21043 = DEFINITIONAL_REPRESENTATION('',(#21044),#21048); +#21044 = LINE('',#21045,#21046); +#21045 = CARTESIAN_POINT('',(0.,0.)); +#21046 = VECTOR('',#21047,1.); +#21047 = DIRECTION('',(0.,1.)); +#21048 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21049 = PCURVE('',#20999,#21050); +#21050 = DEFINITIONAL_REPRESENTATION('',(#21051),#21055); +#21051 = LINE('',#21052,#21053); +#21052 = CARTESIAN_POINT('',(4.5E-02,-1.655)); +#21053 = VECTOR('',#21054,1.); +#21054 = DIRECTION('',(0.,1.)); +#21055 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21056 = ORIENTED_EDGE('',*,*,#21057,.F.); +#21057 = EDGE_CURVE('',#20561,#21035,#21058,.T.); +#21058 = SURFACE_CURVE('',#21059,(#21063,#21070),.PCURVE_S1.); +#21059 = LINE('',#21060,#21061); +#21060 = CARTESIAN_POINT('',(-0.955,-0.6,4.5E-02)); +#21061 = VECTOR('',#21062,1.); +#21062 = DIRECTION('',(1.,0.,0.)); +#21063 = PCURVE('',#20525,#21064); +#21064 = DEFINITIONAL_REPRESENTATION('',(#21065),#21069); +#21065 = LINE('',#21066,#21067); +#21066 = CARTESIAN_POINT('',(0.,0.)); +#21067 = VECTOR('',#21068,1.); +#21068 = DIRECTION('',(0.,1.)); +#21069 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21070 = PCURVE('',#20937,#21071); +#21071 = DEFINITIONAL_REPRESENTATION('',(#21072),#21076); +#21072 = LINE('',#21073,#21074); +#21073 = CARTESIAN_POINT('',(0.,0.)); +#21074 = VECTOR('',#21075,1.); +#21075 = DIRECTION('',(1.,0.)); +#21076 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21077 = ADVANCED_FACE('',(#21078),#20464,.T.); +#21078 = FACE_BOUND('',#21079,.T.); +#21079 = EDGE_LOOP('',(#21080,#21081,#21082,#21083)); +#21080 = ORIENTED_EDGE('',*,*,#20743,.F.); +#21081 = ORIENTED_EDGE('',*,*,#20668,.F.); +#21082 = ORIENTED_EDGE('',*,*,#20448,.T.); +#21083 = ORIENTED_EDGE('',*,*,#21084,.T.); +#21084 = EDGE_CURVE('',#20449,#20744,#21085,.T.); +#21085 = SURFACE_CURVE('',#21086,(#21090,#21097),.PCURVE_S1.); +#21086 = LINE('',#21087,#21088); +#21087 = CARTESIAN_POINT('',(-0.745,-0.6,0.45)); +#21088 = VECTOR('',#21089,1.); +#21089 = DIRECTION('',(0.,1.,0.)); +#21090 = PCURVE('',#20464,#21091); +#21091 = DEFINITIONAL_REPRESENTATION('',(#21092),#21096); +#21092 = LINE('',#21093,#21094); +#21093 = CARTESIAN_POINT('',(0.255,0.)); +#21094 = VECTOR('',#21095,1.); +#21095 = DIRECTION('',(0.,1.)); +#21096 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21097 = PCURVE('',#20497,#21098); +#21098 = DEFINITIONAL_REPRESENTATION('',(#21099),#21103); +#21099 = LINE('',#21100,#21101); +#21100 = CARTESIAN_POINT('',(4.712388980385,0.)); +#21101 = VECTOR('',#21102,1.); +#21102 = DIRECTION('',(0.,1.)); +#21103 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21104 = ADVANCED_FACE('',(#21105),#20497,.T.); +#21105 = FACE_BOUND('',#21106,.T.); +#21106 = EDGE_LOOP('',(#21107,#21133,#21134,#21135)); +#21107 = ORIENTED_EDGE('',*,*,#21108,.T.); +#21108 = EDGE_CURVE('',#20477,#20767,#21109,.T.); +#21109 = SURFACE_CURVE('',#21110,(#21114,#21121),.PCURVE_S1.); +#21110 = LINE('',#21111,#21112); +#21111 = CARTESIAN_POINT('',(-0.7,-0.6,0.405)); +#21112 = VECTOR('',#21113,1.); +#21113 = DIRECTION('',(0.,1.,0.)); +#21114 = PCURVE('',#20497,#21115); +#21115 = DEFINITIONAL_REPRESENTATION('',(#21116),#21120); +#21116 = LINE('',#21117,#21118); +#21117 = CARTESIAN_POINT('',(6.28318530718,0.)); +#21118 = VECTOR('',#21119,1.); +#21119 = DIRECTION('',(0.,1.)); +#21120 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21121 = PCURVE('',#21122,#21127); +#21122 = PLANE('',#21123); +#21123 = AXIS2_PLACEMENT_3D('',#21124,#21125,#21126); +#21124 = CARTESIAN_POINT('',(-0.7,-0.6,0.405)); +#21125 = DIRECTION('',(1.,0.,0.)); +#21126 = DIRECTION('',(0.,0.,1.)); +#21127 = DEFINITIONAL_REPRESENTATION('',(#21128),#21132); +#21128 = LINE('',#21129,#21130); +#21129 = CARTESIAN_POINT('',(0.,0.)); +#21130 = VECTOR('',#21131,1.); +#21131 = DIRECTION('',(0.,-1.)); +#21132 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21133 = ORIENTED_EDGE('',*,*,#20766,.T.); +#21134 = ORIENTED_EDGE('',*,*,#21084,.F.); +#21135 = ORIENTED_EDGE('',*,*,#20476,.F.); +#21136 = ADVANCED_FACE('',(#21137),#20810,.T.); +#21137 = FACE_BOUND('',#21138,.T.); +#21138 = EDGE_LOOP('',(#21139,#21140,#21141,#21142,#21170,#21198,#21221, + #21244)); +#21139 = ORIENTED_EDGE('',*,*,#20845,.F.); +#21140 = ORIENTED_EDGE('',*,*,#20822,.T.); +#21141 = ORIENTED_EDGE('',*,*,#20794,.T.); +#21142 = ORIENTED_EDGE('',*,*,#21143,.T.); +#21143 = EDGE_CURVE('',#20767,#21144,#21146,.T.); +#21144 = VERTEX_POINT('',#21145); +#21145 = CARTESIAN_POINT('',(0.7,0.6,0.405)); +#21146 = SURFACE_CURVE('',#21147,(#21151,#21158),.PCURVE_S1.); +#21147 = LINE('',#21148,#21149); +#21148 = CARTESIAN_POINT('',(-0.7,0.6,0.405)); +#21149 = VECTOR('',#21150,1.); +#21150 = DIRECTION('',(1.,0.,0.)); +#21151 = PCURVE('',#20810,#21152); +#21152 = DEFINITIONAL_REPRESENTATION('',(#21153),#21157); +#21153 = LINE('',#21154,#21155); +#21154 = CARTESIAN_POINT('',(0.36,0.255)); +#21155 = VECTOR('',#21156,1.); +#21156 = DIRECTION('',(0.,1.)); +#21157 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21158 = PCURVE('',#21159,#21164); +#21159 = PLANE('',#21160); +#21160 = AXIS2_PLACEMENT_3D('',#21161,#21162,#21163); +#21161 = CARTESIAN_POINT('',(-0.7,0.6,0.405)); +#21162 = DIRECTION('',(0.,1.,0.)); +#21163 = DIRECTION('',(0.,-0.,1.)); +#21164 = DEFINITIONAL_REPRESENTATION('',(#21165),#21169); +#21165 = LINE('',#21166,#21167); +#21166 = CARTESIAN_POINT('',(0.,0.)); +#21167 = VECTOR('',#21168,1.); +#21168 = DIRECTION('',(0.,1.)); +#21169 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21170 = ORIENTED_EDGE('',*,*,#21171,.T.); +#21171 = EDGE_CURVE('',#21144,#21172,#21174,.T.); +#21172 = VERTEX_POINT('',#21173); +#21173 = CARTESIAN_POINT('',(0.955,0.6,0.405)); +#21174 = SURFACE_CURVE('',#21175,(#21179,#21186),.PCURVE_S1.); +#21175 = LINE('',#21176,#21177); +#21176 = CARTESIAN_POINT('',(-0.955,0.6,0.405)); +#21177 = VECTOR('',#21178,1.); +#21178 = DIRECTION('',(1.,0.,0.)); +#21179 = PCURVE('',#20810,#21180); +#21180 = DEFINITIONAL_REPRESENTATION('',(#21181),#21185); +#21181 = LINE('',#21182,#21183); +#21182 = CARTESIAN_POINT('',(0.36,0.)); +#21183 = VECTOR('',#21184,1.); +#21184 = DIRECTION('',(0.,1.)); +#21185 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21186 = PCURVE('',#21187,#21192); +#21187 = PLANE('',#21188); +#21188 = AXIS2_PLACEMENT_3D('',#21189,#21190,#21191); +#21189 = CARTESIAN_POINT('',(0.7,0.6,0.)); +#21190 = DIRECTION('',(0.,1.,0.)); +#21191 = DIRECTION('',(0.,-0.,1.)); +#21192 = DEFINITIONAL_REPRESENTATION('',(#21193),#21197); +#21193 = LINE('',#21194,#21195); +#21194 = CARTESIAN_POINT('',(0.405,-1.655)); +#21195 = VECTOR('',#21196,1.); +#21196 = DIRECTION('',(0.,1.)); +#21197 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21198 = ORIENTED_EDGE('',*,*,#21199,.F.); +#21199 = EDGE_CURVE('',#21200,#21172,#21202,.T.); +#21200 = VERTEX_POINT('',#21201); +#21201 = CARTESIAN_POINT('',(0.955,0.6,4.5E-02)); +#21202 = SURFACE_CURVE('',#21203,(#21207,#21214),.PCURVE_S1.); +#21203 = LINE('',#21204,#21205); +#21204 = CARTESIAN_POINT('',(0.955,0.6,4.5E-02)); +#21205 = VECTOR('',#21206,1.); +#21206 = DIRECTION('',(0.,0.,1.)); +#21207 = PCURVE('',#20810,#21208); +#21208 = DEFINITIONAL_REPRESENTATION('',(#21209),#21213); +#21209 = LINE('',#21210,#21211); +#21210 = CARTESIAN_POINT('',(0.,1.91)); +#21211 = VECTOR('',#21212,1.); +#21212 = DIRECTION('',(1.,0.)); +#21213 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21214 = PCURVE('',#21187,#21215); +#21215 = DEFINITIONAL_REPRESENTATION('',(#21216),#21220); +#21216 = LINE('',#21217,#21218); +#21217 = CARTESIAN_POINT('',(4.5E-02,0.255)); +#21218 = VECTOR('',#21219,1.); +#21219 = DIRECTION('',(1.,0.)); +#21220 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21221 = ORIENTED_EDGE('',*,*,#21222,.F.); +#21222 = EDGE_CURVE('',#21223,#21200,#21225,.T.); +#21223 = VERTEX_POINT('',#21224); +#21224 = CARTESIAN_POINT('',(0.7,0.6,4.5E-02)); +#21225 = SURFACE_CURVE('',#21226,(#21230,#21237),.PCURVE_S1.); +#21226 = LINE('',#21227,#21228); +#21227 = CARTESIAN_POINT('',(-0.955,0.6,4.5E-02)); +#21228 = VECTOR('',#21229,1.); +#21229 = DIRECTION('',(1.,0.,0.)); +#21230 = PCURVE('',#20810,#21231); +#21231 = DEFINITIONAL_REPRESENTATION('',(#21232),#21236); +#21232 = LINE('',#21233,#21234); +#21233 = CARTESIAN_POINT('',(0.,0.)); +#21234 = VECTOR('',#21235,1.); +#21235 = DIRECTION('',(0.,1.)); +#21236 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21237 = PCURVE('',#21187,#21238); +#21238 = DEFINITIONAL_REPRESENTATION('',(#21239),#21243); +#21239 = LINE('',#21240,#21241); +#21240 = CARTESIAN_POINT('',(4.5E-02,-1.655)); +#21241 = VECTOR('',#21242,1.); +#21242 = DIRECTION('',(0.,1.)); +#21243 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21244 = ORIENTED_EDGE('',*,*,#21245,.F.); +#21245 = EDGE_CURVE('',#20846,#21223,#21246,.T.); +#21246 = SURFACE_CURVE('',#21247,(#21251,#21258),.PCURVE_S1.); +#21247 = LINE('',#21248,#21249); +#21248 = CARTESIAN_POINT('',(-0.955,0.6,4.5E-02)); +#21249 = VECTOR('',#21250,1.); +#21250 = DIRECTION('',(1.,0.,0.)); +#21251 = PCURVE('',#20810,#21252); +#21252 = DEFINITIONAL_REPRESENTATION('',(#21253),#21257); +#21253 = LINE('',#21254,#21255); +#21254 = CARTESIAN_POINT('',(0.,0.)); +#21255 = VECTOR('',#21256,1.); +#21256 = DIRECTION('',(0.,1.)); +#21257 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21258 = PCURVE('',#20937,#21259); +#21259 = DEFINITIONAL_REPRESENTATION('',(#21260),#21264); +#21260 = LINE('',#21261,#21262); +#21261 = CARTESIAN_POINT('',(0.,1.2)); +#21262 = VECTOR('',#21263,1.); +#21263 = DIRECTION('',(1.,0.)); +#21264 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21265 = ADVANCED_FACE('',(#21266),#20937,.F.); +#21266 = FACE_BOUND('',#21267,.F.); +#21267 = EDGE_LOOP('',(#21268,#21269,#21270,#21296)); +#21268 = ORIENTED_EDGE('',*,*,#20923,.F.); +#21269 = ORIENTED_EDGE('',*,*,#21057,.T.); +#21270 = ORIENTED_EDGE('',*,*,#21271,.T.); +#21271 = EDGE_CURVE('',#21035,#21223,#21272,.T.); +#21272 = SURFACE_CURVE('',#21273,(#21277,#21284),.PCURVE_S1.); +#21273 = LINE('',#21274,#21275); +#21274 = CARTESIAN_POINT('',(0.7,-0.6,4.5E-02)); +#21275 = VECTOR('',#21276,1.); +#21276 = DIRECTION('',(0.,1.,0.)); +#21277 = PCURVE('',#20937,#21278); +#21278 = DEFINITIONAL_REPRESENTATION('',(#21279),#21283); +#21279 = LINE('',#21280,#21281); +#21280 = CARTESIAN_POINT('',(1.655,0.)); +#21281 = VECTOR('',#21282,1.); +#21282 = DIRECTION('',(0.,1.)); +#21283 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21284 = PCURVE('',#21285,#21290); +#21285 = CYLINDRICAL_SURFACE('',#21286,4.5E-02); +#21286 = AXIS2_PLACEMENT_3D('',#21287,#21288,#21289); +#21287 = CARTESIAN_POINT('',(0.745,-0.6,4.5E-02)); +#21288 = DIRECTION('',(0.,1.,0.)); +#21289 = DIRECTION('',(-1.,0.,0.)); +#21290 = DEFINITIONAL_REPRESENTATION('',(#21291),#21295); +#21291 = LINE('',#21292,#21293); +#21292 = CARTESIAN_POINT('',(6.28318530718,0.)); +#21293 = VECTOR('',#21294,1.); +#21294 = DIRECTION('',(0.,1.)); +#21295 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21296 = ORIENTED_EDGE('',*,*,#21245,.F.); +#21297 = ADVANCED_FACE('',(#21298),#20999,.F.); +#21298 = FACE_BOUND('',#21299,.F.); +#21299 = EDGE_LOOP('',(#21300,#21330,#21356,#21357,#21358,#21359,#21388, + #21416,#21449,#21477)); +#21300 = ORIENTED_EDGE('',*,*,#21301,.F.); +#21301 = EDGE_CURVE('',#21302,#21304,#21306,.T.); +#21302 = VERTEX_POINT('',#21303); +#21303 = CARTESIAN_POINT('',(0.745,-0.6,-2.775557561563E-17)); +#21304 = VERTEX_POINT('',#21305); +#21305 = CARTESIAN_POINT('',(0.955,-0.6,-2.775557561563E-17)); +#21306 = SURFACE_CURVE('',#21307,(#21311,#21318),.PCURVE_S1.); +#21307 = LINE('',#21308,#21309); +#21308 = CARTESIAN_POINT('',(0.7,-0.6,0.)); +#21309 = VECTOR('',#21310,1.); +#21310 = DIRECTION('',(1.,0.,0.)); +#21311 = PCURVE('',#20999,#21312); +#21312 = DEFINITIONAL_REPRESENTATION('',(#21313),#21317); +#21313 = LINE('',#21314,#21315); +#21314 = CARTESIAN_POINT('',(0.,0.)); +#21315 = VECTOR('',#21316,1.); +#21316 = DIRECTION('',(0.,1.)); +#21317 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21318 = PCURVE('',#21319,#21324); +#21319 = PLANE('',#21320); +#21320 = AXIS2_PLACEMENT_3D('',#21321,#21322,#21323); +#21321 = CARTESIAN_POINT('',(0.7,-0.6,0.)); +#21322 = DIRECTION('',(0.,0.,1.)); +#21323 = DIRECTION('',(1.,0.,-0.)); +#21324 = DEFINITIONAL_REPRESENTATION('',(#21325),#21329); +#21325 = LINE('',#21326,#21327); +#21326 = CARTESIAN_POINT('',(0.,0.)); +#21327 = VECTOR('',#21328,1.); +#21328 = DIRECTION('',(1.,0.)); +#21329 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21330 = ORIENTED_EDGE('',*,*,#21331,.F.); +#21331 = EDGE_CURVE('',#21035,#21302,#21332,.T.); +#21332 = SURFACE_CURVE('',#21333,(#21338,#21349),.PCURVE_S1.); +#21333 = CIRCLE('',#21334,4.5E-02); +#21334 = AXIS2_PLACEMENT_3D('',#21335,#21336,#21337); +#21335 = CARTESIAN_POINT('',(0.745,-0.6,4.5E-02)); +#21336 = DIRECTION('',(0.,-1.,0.)); +#21337 = DIRECTION('',(0.,0.,1.)); +#21338 = PCURVE('',#20999,#21339); +#21339 = DEFINITIONAL_REPRESENTATION('',(#21340),#21348); +#21340 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#21341,#21342,#21343,#21344 + ,#21345,#21346,#21347),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#21341 = CARTESIAN_POINT('',(9.E-02,4.5E-02)); +#21342 = CARTESIAN_POINT('',(9.E-02,-3.29422863406E-02)); +#21343 = CARTESIAN_POINT('',(2.25E-02,6.0288568297E-03)); +#21344 = CARTESIAN_POINT('',(-4.5E-02,4.5E-02)); +#21345 = CARTESIAN_POINT('',(2.25E-02,8.39711431703E-02)); +#21346 = CARTESIAN_POINT('',(9.E-02,0.122942286341)); +#21347 = CARTESIAN_POINT('',(9.E-02,4.5E-02)); +#21348 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21349 = PCURVE('',#21285,#21350); +#21350 = DEFINITIONAL_REPRESENTATION('',(#21351),#21355); +#21351 = LINE('',#21352,#21353); +#21352 = CARTESIAN_POINT('',(7.853981633974,0.)); +#21353 = VECTOR('',#21354,1.); +#21354 = DIRECTION('',(-1.,0.)); +#21355 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21356 = ORIENTED_EDGE('',*,*,#21034,.T.); +#21357 = ORIENTED_EDGE('',*,*,#21011,.T.); +#21358 = ORIENTED_EDGE('',*,*,#20983,.F.); +#21359 = ORIENTED_EDGE('',*,*,#21360,.T.); +#21360 = EDGE_CURVE('',#20956,#21361,#21363,.T.); +#21361 = VERTEX_POINT('',#21362); +#21362 = CARTESIAN_POINT('',(0.745,-0.6,0.45)); +#21363 = SURFACE_CURVE('',#21364,(#21369,#21376),.PCURVE_S1.); +#21364 = CIRCLE('',#21365,4.5E-02); +#21365 = AXIS2_PLACEMENT_3D('',#21366,#21367,#21368); +#21366 = CARTESIAN_POINT('',(0.745,-0.6,0.405)); +#21367 = DIRECTION('',(0.,1.,0.)); +#21368 = DIRECTION('',(0.,-0.,1.)); +#21369 = PCURVE('',#20999,#21370); +#21370 = DEFINITIONAL_REPRESENTATION('',(#21371),#21375); +#21371 = CIRCLE('',#21372,4.5E-02); +#21372 = AXIS2_PLACEMENT_2D('',#21373,#21374); +#21373 = CARTESIAN_POINT('',(0.405,4.5E-02)); +#21374 = DIRECTION('',(1.,0.)); +#21375 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21376 = PCURVE('',#21377,#21382); +#21377 = CYLINDRICAL_SURFACE('',#21378,4.5E-02); +#21378 = AXIS2_PLACEMENT_3D('',#21379,#21380,#21381); +#21379 = CARTESIAN_POINT('',(0.745,-0.6,0.405)); +#21380 = DIRECTION('',(0.,1.,0.)); +#21381 = DIRECTION('',(-1.,0.,0.)); +#21382 = DEFINITIONAL_REPRESENTATION('',(#21383),#21387); +#21383 = LINE('',#21384,#21385); +#21384 = CARTESIAN_POINT('',(-4.712388980385,0.)); +#21385 = VECTOR('',#21386,1.); +#21386 = DIRECTION('',(1.,0.)); +#21387 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21388 = ORIENTED_EDGE('',*,*,#21389,.T.); +#21389 = EDGE_CURVE('',#21361,#21390,#21392,.T.); +#21390 = VERTEX_POINT('',#21391); +#21391 = CARTESIAN_POINT('',(0.955,-0.6,0.45)); +#21392 = SURFACE_CURVE('',#21393,(#21397,#21404),.PCURVE_S1.); +#21393 = LINE('',#21394,#21395); +#21394 = CARTESIAN_POINT('',(0.7,-0.6,0.45)); +#21395 = VECTOR('',#21396,1.); +#21396 = DIRECTION('',(1.,0.,0.)); +#21397 = PCURVE('',#20999,#21398); +#21398 = DEFINITIONAL_REPRESENTATION('',(#21399),#21403); +#21399 = LINE('',#21400,#21401); +#21400 = CARTESIAN_POINT('',(0.45,0.)); +#21401 = VECTOR('',#21402,1.); +#21402 = DIRECTION('',(0.,1.)); +#21403 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21404 = PCURVE('',#21405,#21410); +#21405 = PLANE('',#21406); +#21406 = AXIS2_PLACEMENT_3D('',#21407,#21408,#21409); +#21407 = CARTESIAN_POINT('',(0.7,-0.6,0.45)); +#21408 = DIRECTION('',(0.,0.,1.)); +#21409 = DIRECTION('',(1.,0.,-0.)); +#21410 = DEFINITIONAL_REPRESENTATION('',(#21411),#21415); +#21411 = LINE('',#21412,#21413); +#21412 = CARTESIAN_POINT('',(0.,0.)); +#21413 = VECTOR('',#21414,1.); +#21414 = DIRECTION('',(1.,0.)); +#21415 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21416 = ORIENTED_EDGE('',*,*,#21417,.F.); +#21417 = EDGE_CURVE('',#21418,#21390,#21420,.T.); +#21418 = VERTEX_POINT('',#21419); +#21419 = CARTESIAN_POINT('',(1.,-0.6,0.405)); +#21420 = SURFACE_CURVE('',#21421,(#21426,#21437),.PCURVE_S1.); +#21421 = CIRCLE('',#21422,4.5E-02); +#21422 = AXIS2_PLACEMENT_3D('',#21423,#21424,#21425); +#21423 = CARTESIAN_POINT('',(0.955,-0.6,0.405)); +#21424 = DIRECTION('',(0.,-1.,0.)); +#21425 = DIRECTION('',(0.,0.,1.)); +#21426 = PCURVE('',#20999,#21427); +#21427 = DEFINITIONAL_REPRESENTATION('',(#21428),#21436); +#21428 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#21429,#21430,#21431,#21432 + ,#21433,#21434,#21435),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#21429 = CARTESIAN_POINT('',(0.45,0.255)); +#21430 = CARTESIAN_POINT('',(0.45,0.177057713659)); +#21431 = CARTESIAN_POINT('',(0.3825,0.21602885683)); +#21432 = CARTESIAN_POINT('',(0.315,0.255)); +#21433 = CARTESIAN_POINT('',(0.3825,0.29397114317)); +#21434 = CARTESIAN_POINT('',(0.45,0.332942286341)); +#21435 = CARTESIAN_POINT('',(0.45,0.255)); +#21436 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21437 = PCURVE('',#21438,#21443); +#21438 = CYLINDRICAL_SURFACE('',#21439,4.5E-02); +#21439 = AXIS2_PLACEMENT_3D('',#21440,#21441,#21442); +#21440 = CARTESIAN_POINT('',(0.955,-0.6,0.405)); +#21441 = DIRECTION('',(0.,1.,0.)); +#21442 = DIRECTION('',(1.,0.,0.)); +#21443 = DEFINITIONAL_REPRESENTATION('',(#21444),#21448); +#21444 = LINE('',#21445,#21446); +#21445 = CARTESIAN_POINT('',(10.995574287564,0.)); +#21446 = VECTOR('',#21447,1.); +#21447 = DIRECTION('',(-1.,0.)); +#21448 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21449 = ORIENTED_EDGE('',*,*,#21450,.F.); +#21450 = EDGE_CURVE('',#21451,#21418,#21453,.T.); +#21451 = VERTEX_POINT('',#21452); +#21452 = CARTESIAN_POINT('',(1.,-0.6,4.5E-02)); +#21453 = SURFACE_CURVE('',#21454,(#21458,#21465),.PCURVE_S1.); +#21454 = LINE('',#21455,#21456); +#21455 = CARTESIAN_POINT('',(1.,-0.6,0.)); +#21456 = VECTOR('',#21457,1.); +#21457 = DIRECTION('',(0.,0.,1.)); +#21458 = PCURVE('',#20999,#21459); +#21459 = DEFINITIONAL_REPRESENTATION('',(#21460),#21464); +#21460 = LINE('',#21461,#21462); +#21461 = CARTESIAN_POINT('',(0.,0.3)); +#21462 = VECTOR('',#21463,1.); +#21463 = DIRECTION('',(1.,0.)); +#21464 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21465 = PCURVE('',#21466,#21471); +#21466 = PLANE('',#21467); +#21467 = AXIS2_PLACEMENT_3D('',#21468,#21469,#21470); +#21468 = CARTESIAN_POINT('',(1.,-0.6,0.)); +#21469 = DIRECTION('',(1.,0.,0.)); +#21470 = DIRECTION('',(0.,0.,1.)); +#21471 = DEFINITIONAL_REPRESENTATION('',(#21472),#21476); +#21472 = LINE('',#21473,#21474); +#21473 = CARTESIAN_POINT('',(0.,0.)); +#21474 = VECTOR('',#21475,1.); +#21475 = DIRECTION('',(1.,0.)); +#21476 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21477 = ORIENTED_EDGE('',*,*,#21478,.T.); +#21478 = EDGE_CURVE('',#21451,#21304,#21479,.T.); +#21479 = SURFACE_CURVE('',#21480,(#21485,#21492),.PCURVE_S1.); +#21480 = CIRCLE('',#21481,4.5E-02); +#21481 = AXIS2_PLACEMENT_3D('',#21482,#21483,#21484); +#21482 = CARTESIAN_POINT('',(0.955,-0.6,4.5E-02)); +#21483 = DIRECTION('',(0.,1.,0.)); +#21484 = DIRECTION('',(0.,-0.,1.)); +#21485 = PCURVE('',#20999,#21486); +#21486 = DEFINITIONAL_REPRESENTATION('',(#21487),#21491); +#21487 = CIRCLE('',#21488,4.5E-02); +#21488 = AXIS2_PLACEMENT_2D('',#21489,#21490); +#21489 = CARTESIAN_POINT('',(4.5E-02,0.255)); +#21490 = DIRECTION('',(1.,0.)); +#21491 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21492 = PCURVE('',#21493,#21498); +#21493 = CYLINDRICAL_SURFACE('',#21494,4.5E-02); +#21494 = AXIS2_PLACEMENT_3D('',#21495,#21496,#21497); +#21495 = CARTESIAN_POINT('',(0.955,-0.6,4.5E-02)); +#21496 = DIRECTION('',(0.,1.,0.)); +#21497 = DIRECTION('',(1.,0.,0.)); +#21498 = DEFINITIONAL_REPRESENTATION('',(#21499),#21503); +#21499 = LINE('',#21500,#21501); +#21500 = CARTESIAN_POINT('',(-1.570796326795,0.)); +#21501 = VECTOR('',#21502,1.); +#21502 = DIRECTION('',(1.,0.)); +#21503 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21504 = ADVANCED_FACE('',(#21505),#20971,.F.); +#21505 = FACE_BOUND('',#21506,.F.); +#21506 = EDGE_LOOP('',(#21507,#21508,#21531,#21559)); +#21507 = ORIENTED_EDGE('',*,*,#20955,.F.); +#21508 = ORIENTED_EDGE('',*,*,#21509,.T.); +#21509 = EDGE_CURVE('',#20477,#21510,#21512,.T.); +#21510 = VERTEX_POINT('',#21511); +#21511 = CARTESIAN_POINT('',(-0.7,-0.6,0.45)); +#21512 = SURFACE_CURVE('',#21513,(#21517,#21524),.PCURVE_S1.); +#21513 = LINE('',#21514,#21515); +#21514 = CARTESIAN_POINT('',(-0.7,-0.6,0.405)); +#21515 = VECTOR('',#21516,1.); +#21516 = DIRECTION('',(0.,0.,1.)); +#21517 = PCURVE('',#20971,#21518); +#21518 = DEFINITIONAL_REPRESENTATION('',(#21519),#21523); +#21519 = LINE('',#21520,#21521); +#21520 = CARTESIAN_POINT('',(0.,0.)); +#21521 = VECTOR('',#21522,1.); +#21522 = DIRECTION('',(1.,0.)); +#21523 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21524 = PCURVE('',#21122,#21525); +#21525 = DEFINITIONAL_REPRESENTATION('',(#21526),#21530); +#21526 = LINE('',#21527,#21528); +#21527 = CARTESIAN_POINT('',(0.,0.)); +#21528 = VECTOR('',#21529,1.); +#21529 = DIRECTION('',(1.,0.)); +#21530 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21531 = ORIENTED_EDGE('',*,*,#21532,.T.); +#21532 = EDGE_CURVE('',#21510,#21533,#21535,.T.); +#21533 = VERTEX_POINT('',#21534); +#21534 = CARTESIAN_POINT('',(0.7,-0.6,0.45)); +#21535 = SURFACE_CURVE('',#21536,(#21540,#21547),.PCURVE_S1.); +#21536 = LINE('',#21537,#21538); +#21537 = CARTESIAN_POINT('',(-0.7,-0.6,0.45)); +#21538 = VECTOR('',#21539,1.); +#21539 = DIRECTION('',(1.,0.,0.)); +#21540 = PCURVE('',#20971,#21541); +#21541 = DEFINITIONAL_REPRESENTATION('',(#21542),#21546); +#21542 = LINE('',#21543,#21544); +#21543 = CARTESIAN_POINT('',(4.5E-02,0.)); +#21544 = VECTOR('',#21545,1.); +#21545 = DIRECTION('',(0.,1.)); +#21546 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21547 = PCURVE('',#21548,#21553); +#21548 = PLANE('',#21549); +#21549 = AXIS2_PLACEMENT_3D('',#21550,#21551,#21552); +#21550 = CARTESIAN_POINT('',(-0.7,-0.6,0.45)); +#21551 = DIRECTION('',(0.,0.,1.)); +#21552 = DIRECTION('',(1.,0.,-0.)); +#21553 = DEFINITIONAL_REPRESENTATION('',(#21554),#21558); +#21554 = LINE('',#21555,#21556); +#21555 = CARTESIAN_POINT('',(0.,0.)); +#21556 = VECTOR('',#21557,1.); +#21557 = DIRECTION('',(1.,0.)); +#21558 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21559 = ORIENTED_EDGE('',*,*,#21560,.F.); +#21560 = EDGE_CURVE('',#20956,#21533,#21561,.T.); +#21561 = SURFACE_CURVE('',#21562,(#21566,#21573),.PCURVE_S1.); +#21562 = LINE('',#21563,#21564); +#21563 = CARTESIAN_POINT('',(0.7,-0.6,0.405)); +#21564 = VECTOR('',#21565,1.); +#21565 = DIRECTION('',(0.,0.,1.)); +#21566 = PCURVE('',#20971,#21567); +#21567 = DEFINITIONAL_REPRESENTATION('',(#21568),#21572); +#21568 = LINE('',#21569,#21570); +#21569 = CARTESIAN_POINT('',(0.,1.4)); +#21570 = VECTOR('',#21571,1.); +#21571 = DIRECTION('',(1.,0.)); +#21572 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21573 = PCURVE('',#21574,#21579); +#21574 = PLANE('',#21575); +#21575 = AXIS2_PLACEMENT_3D('',#21576,#21577,#21578); +#21576 = CARTESIAN_POINT('',(0.7,-0.6,0.405)); +#21577 = DIRECTION('',(1.,0.,0.)); +#21578 = DIRECTION('',(0.,0.,1.)); +#21579 = DEFINITIONAL_REPRESENTATION('',(#21580),#21584); +#21580 = LINE('',#21581,#21582); +#21581 = CARTESIAN_POINT('',(0.,0.)); +#21582 = VECTOR('',#21583,1.); +#21583 = DIRECTION('',(1.,0.)); +#21584 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21585 = ADVANCED_FACE('',(#21586),#21122,.F.); +#21586 = FACE_BOUND('',#21587,.F.); +#21587 = EDGE_LOOP('',(#21588,#21589,#21590,#21613)); +#21588 = ORIENTED_EDGE('',*,*,#21509,.F.); +#21589 = ORIENTED_EDGE('',*,*,#21108,.T.); +#21590 = ORIENTED_EDGE('',*,*,#21591,.T.); +#21591 = EDGE_CURVE('',#20767,#21592,#21594,.T.); +#21592 = VERTEX_POINT('',#21593); +#21593 = CARTESIAN_POINT('',(-0.7,0.6,0.45)); +#21594 = SURFACE_CURVE('',#21595,(#21599,#21606),.PCURVE_S1.); +#21595 = LINE('',#21596,#21597); +#21596 = CARTESIAN_POINT('',(-0.7,0.6,0.405)); +#21597 = VECTOR('',#21598,1.); +#21598 = DIRECTION('',(0.,0.,1.)); +#21599 = PCURVE('',#21122,#21600); +#21600 = DEFINITIONAL_REPRESENTATION('',(#21601),#21605); +#21601 = LINE('',#21602,#21603); +#21602 = CARTESIAN_POINT('',(0.,-1.2)); +#21603 = VECTOR('',#21604,1.); +#21604 = DIRECTION('',(1.,0.)); +#21605 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21606 = PCURVE('',#21159,#21607); +#21607 = DEFINITIONAL_REPRESENTATION('',(#21608),#21612); +#21608 = LINE('',#21609,#21610); +#21609 = CARTESIAN_POINT('',(0.,0.)); +#21610 = VECTOR('',#21611,1.); +#21611 = DIRECTION('',(1.,0.)); +#21612 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21613 = ORIENTED_EDGE('',*,*,#21614,.F.); +#21614 = EDGE_CURVE('',#21510,#21592,#21615,.T.); +#21615 = SURFACE_CURVE('',#21616,(#21620,#21627),.PCURVE_S1.); +#21616 = LINE('',#21617,#21618); +#21617 = CARTESIAN_POINT('',(-0.7,-0.6,0.45)); +#21618 = VECTOR('',#21619,1.); +#21619 = DIRECTION('',(0.,1.,0.)); +#21620 = PCURVE('',#21122,#21621); +#21621 = DEFINITIONAL_REPRESENTATION('',(#21622),#21626); +#21622 = LINE('',#21623,#21624); +#21623 = CARTESIAN_POINT('',(4.5E-02,0.)); +#21624 = VECTOR('',#21625,1.); +#21625 = DIRECTION('',(0.,-1.)); +#21626 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21627 = PCURVE('',#21548,#21628); +#21628 = DEFINITIONAL_REPRESENTATION('',(#21629),#21633); +#21629 = LINE('',#21630,#21631); +#21630 = CARTESIAN_POINT('',(0.,0.)); +#21631 = VECTOR('',#21632,1.); +#21632 = DIRECTION('',(0.,1.)); +#21633 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21634 = ADVANCED_FACE('',(#21635),#21187,.T.); +#21635 = FACE_BOUND('',#21636,.T.); +#21636 = EDGE_LOOP('',(#21637,#21662,#21688,#21689,#21690,#21691,#21715, + #21738,#21766,#21789)); +#21637 = ORIENTED_EDGE('',*,*,#21638,.F.); +#21638 = EDGE_CURVE('',#21639,#21641,#21643,.T.); +#21639 = VERTEX_POINT('',#21640); +#21640 = CARTESIAN_POINT('',(0.745,0.6,-2.775557561563E-17)); +#21641 = VERTEX_POINT('',#21642); +#21642 = CARTESIAN_POINT('',(0.955,0.6,-2.775557561563E-17)); +#21643 = SURFACE_CURVE('',#21644,(#21648,#21655),.PCURVE_S1.); +#21644 = LINE('',#21645,#21646); +#21645 = CARTESIAN_POINT('',(0.7,0.6,0.)); +#21646 = VECTOR('',#21647,1.); +#21647 = DIRECTION('',(1.,0.,0.)); +#21648 = PCURVE('',#21187,#21649); +#21649 = DEFINITIONAL_REPRESENTATION('',(#21650),#21654); +#21650 = LINE('',#21651,#21652); +#21651 = CARTESIAN_POINT('',(0.,0.)); +#21652 = VECTOR('',#21653,1.); +#21653 = DIRECTION('',(0.,1.)); +#21654 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21655 = PCURVE('',#21319,#21656); +#21656 = DEFINITIONAL_REPRESENTATION('',(#21657),#21661); +#21657 = LINE('',#21658,#21659); +#21658 = CARTESIAN_POINT('',(0.,1.2)); +#21659 = VECTOR('',#21660,1.); +#21660 = DIRECTION('',(1.,0.)); +#21661 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21662 = ORIENTED_EDGE('',*,*,#21663,.F.); +#21663 = EDGE_CURVE('',#21223,#21639,#21664,.T.); +#21664 = SURFACE_CURVE('',#21665,(#21670,#21681),.PCURVE_S1.); +#21665 = CIRCLE('',#21666,4.5E-02); +#21666 = AXIS2_PLACEMENT_3D('',#21667,#21668,#21669); +#21667 = CARTESIAN_POINT('',(0.745,0.6,4.5E-02)); +#21668 = DIRECTION('',(0.,-1.,0.)); +#21669 = DIRECTION('',(0.,0.,1.)); +#21670 = PCURVE('',#21187,#21671); +#21671 = DEFINITIONAL_REPRESENTATION('',(#21672),#21680); +#21672 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#21673,#21674,#21675,#21676 + ,#21677,#21678,#21679),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#21673 = CARTESIAN_POINT('',(9.E-02,4.5E-02)); +#21674 = CARTESIAN_POINT('',(9.E-02,-3.29422863406E-02)); +#21675 = CARTESIAN_POINT('',(2.25E-02,6.0288568297E-03)); +#21676 = CARTESIAN_POINT('',(-4.5E-02,4.5E-02)); +#21677 = CARTESIAN_POINT('',(2.25E-02,8.39711431703E-02)); +#21678 = CARTESIAN_POINT('',(9.E-02,0.122942286341)); +#21679 = CARTESIAN_POINT('',(9.E-02,4.5E-02)); +#21680 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21681 = PCURVE('',#21285,#21682); +#21682 = DEFINITIONAL_REPRESENTATION('',(#21683),#21687); +#21683 = LINE('',#21684,#21685); +#21684 = CARTESIAN_POINT('',(7.853981633974,1.2)); +#21685 = VECTOR('',#21686,1.); +#21686 = DIRECTION('',(-1.,0.)); +#21687 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21688 = ORIENTED_EDGE('',*,*,#21222,.T.); +#21689 = ORIENTED_EDGE('',*,*,#21199,.T.); +#21690 = ORIENTED_EDGE('',*,*,#21171,.F.); +#21691 = ORIENTED_EDGE('',*,*,#21692,.T.); +#21692 = EDGE_CURVE('',#21144,#21693,#21695,.T.); +#21693 = VERTEX_POINT('',#21694); +#21694 = CARTESIAN_POINT('',(0.745,0.6,0.45)); +#21695 = SURFACE_CURVE('',#21696,(#21701,#21708),.PCURVE_S1.); +#21696 = CIRCLE('',#21697,4.5E-02); +#21697 = AXIS2_PLACEMENT_3D('',#21698,#21699,#21700); +#21698 = CARTESIAN_POINT('',(0.745,0.6,0.405)); +#21699 = DIRECTION('',(0.,1.,0.)); +#21700 = DIRECTION('',(0.,-0.,1.)); +#21701 = PCURVE('',#21187,#21702); +#21702 = DEFINITIONAL_REPRESENTATION('',(#21703),#21707); +#21703 = CIRCLE('',#21704,4.5E-02); +#21704 = AXIS2_PLACEMENT_2D('',#21705,#21706); +#21705 = CARTESIAN_POINT('',(0.405,4.5E-02)); +#21706 = DIRECTION('',(1.,0.)); +#21707 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21708 = PCURVE('',#21377,#21709); +#21709 = DEFINITIONAL_REPRESENTATION('',(#21710),#21714); +#21710 = LINE('',#21711,#21712); +#21711 = CARTESIAN_POINT('',(-4.712388980385,1.2)); +#21712 = VECTOR('',#21713,1.); +#21713 = DIRECTION('',(1.,0.)); +#21714 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21715 = ORIENTED_EDGE('',*,*,#21716,.T.); +#21716 = EDGE_CURVE('',#21693,#21717,#21719,.T.); +#21717 = VERTEX_POINT('',#21718); +#21718 = CARTESIAN_POINT('',(0.955,0.6,0.45)); +#21719 = SURFACE_CURVE('',#21720,(#21724,#21731),.PCURVE_S1.); +#21720 = LINE('',#21721,#21722); +#21721 = CARTESIAN_POINT('',(0.7,0.6,0.45)); +#21722 = VECTOR('',#21723,1.); +#21723 = DIRECTION('',(1.,0.,0.)); +#21724 = PCURVE('',#21187,#21725); +#21725 = DEFINITIONAL_REPRESENTATION('',(#21726),#21730); +#21726 = LINE('',#21727,#21728); +#21727 = CARTESIAN_POINT('',(0.45,0.)); +#21728 = VECTOR('',#21729,1.); +#21729 = DIRECTION('',(0.,1.)); +#21730 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21731 = PCURVE('',#21405,#21732); +#21732 = DEFINITIONAL_REPRESENTATION('',(#21733),#21737); +#21733 = LINE('',#21734,#21735); +#21734 = CARTESIAN_POINT('',(0.,1.2)); +#21735 = VECTOR('',#21736,1.); +#21736 = DIRECTION('',(1.,0.)); +#21737 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21738 = ORIENTED_EDGE('',*,*,#21739,.F.); +#21739 = EDGE_CURVE('',#21740,#21717,#21742,.T.); +#21740 = VERTEX_POINT('',#21741); +#21741 = CARTESIAN_POINT('',(1.,0.6,0.405)); +#21742 = SURFACE_CURVE('',#21743,(#21748,#21759),.PCURVE_S1.); +#21743 = CIRCLE('',#21744,4.5E-02); +#21744 = AXIS2_PLACEMENT_3D('',#21745,#21746,#21747); +#21745 = CARTESIAN_POINT('',(0.955,0.6,0.405)); +#21746 = DIRECTION('',(0.,-1.,0.)); +#21747 = DIRECTION('',(0.,0.,1.)); +#21748 = PCURVE('',#21187,#21749); +#21749 = DEFINITIONAL_REPRESENTATION('',(#21750),#21758); +#21750 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#21751,#21752,#21753,#21754 + ,#21755,#21756,#21757),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#21751 = CARTESIAN_POINT('',(0.45,0.255)); +#21752 = CARTESIAN_POINT('',(0.45,0.177057713659)); +#21753 = CARTESIAN_POINT('',(0.3825,0.21602885683)); +#21754 = CARTESIAN_POINT('',(0.315,0.255)); +#21755 = CARTESIAN_POINT('',(0.3825,0.29397114317)); +#21756 = CARTESIAN_POINT('',(0.45,0.332942286341)); +#21757 = CARTESIAN_POINT('',(0.45,0.255)); +#21758 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21759 = PCURVE('',#21438,#21760); +#21760 = DEFINITIONAL_REPRESENTATION('',(#21761),#21765); +#21761 = LINE('',#21762,#21763); +#21762 = CARTESIAN_POINT('',(10.995574287564,1.2)); +#21763 = VECTOR('',#21764,1.); +#21764 = DIRECTION('',(-1.,0.)); +#21765 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21766 = ORIENTED_EDGE('',*,*,#21767,.F.); +#21767 = EDGE_CURVE('',#21768,#21740,#21770,.T.); +#21768 = VERTEX_POINT('',#21769); +#21769 = CARTESIAN_POINT('',(1.,0.6,4.5E-02)); +#21770 = SURFACE_CURVE('',#21771,(#21775,#21782),.PCURVE_S1.); +#21771 = LINE('',#21772,#21773); +#21772 = CARTESIAN_POINT('',(1.,0.6,0.)); +#21773 = VECTOR('',#21774,1.); +#21774 = DIRECTION('',(0.,0.,1.)); +#21775 = PCURVE('',#21187,#21776); +#21776 = DEFINITIONAL_REPRESENTATION('',(#21777),#21781); +#21777 = LINE('',#21778,#21779); +#21778 = CARTESIAN_POINT('',(0.,0.3)); +#21779 = VECTOR('',#21780,1.); +#21780 = DIRECTION('',(1.,0.)); +#21781 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21782 = PCURVE('',#21466,#21783); +#21783 = DEFINITIONAL_REPRESENTATION('',(#21784),#21788); +#21784 = LINE('',#21785,#21786); +#21785 = CARTESIAN_POINT('',(0.,-1.2)); +#21786 = VECTOR('',#21787,1.); +#21787 = DIRECTION('',(1.,0.)); +#21788 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21789 = ORIENTED_EDGE('',*,*,#21790,.T.); +#21790 = EDGE_CURVE('',#21768,#21641,#21791,.T.); +#21791 = SURFACE_CURVE('',#21792,(#21797,#21804),.PCURVE_S1.); +#21792 = CIRCLE('',#21793,4.5E-02); +#21793 = AXIS2_PLACEMENT_3D('',#21794,#21795,#21796); +#21794 = CARTESIAN_POINT('',(0.955,0.6,4.5E-02)); +#21795 = DIRECTION('',(0.,1.,0.)); +#21796 = DIRECTION('',(0.,-0.,1.)); +#21797 = PCURVE('',#21187,#21798); +#21798 = DEFINITIONAL_REPRESENTATION('',(#21799),#21803); +#21799 = CIRCLE('',#21800,4.5E-02); +#21800 = AXIS2_PLACEMENT_2D('',#21801,#21802); +#21801 = CARTESIAN_POINT('',(4.5E-02,0.255)); +#21802 = DIRECTION('',(1.,0.)); +#21803 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21804 = PCURVE('',#21493,#21805); +#21805 = DEFINITIONAL_REPRESENTATION('',(#21806),#21810); +#21806 = LINE('',#21807,#21808); +#21807 = CARTESIAN_POINT('',(-1.570796326795,1.2)); +#21808 = VECTOR('',#21809,1.); +#21809 = DIRECTION('',(1.,0.)); +#21810 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21811 = ADVANCED_FACE('',(#21812),#21159,.T.); +#21812 = FACE_BOUND('',#21813,.T.); +#21813 = EDGE_LOOP('',(#21814,#21815,#21816,#21839)); +#21814 = ORIENTED_EDGE('',*,*,#21143,.F.); +#21815 = ORIENTED_EDGE('',*,*,#21591,.T.); +#21816 = ORIENTED_EDGE('',*,*,#21817,.T.); +#21817 = EDGE_CURVE('',#21592,#21818,#21820,.T.); +#21818 = VERTEX_POINT('',#21819); +#21819 = CARTESIAN_POINT('',(0.7,0.6,0.45)); +#21820 = SURFACE_CURVE('',#21821,(#21825,#21832),.PCURVE_S1.); +#21821 = LINE('',#21822,#21823); +#21822 = CARTESIAN_POINT('',(-0.7,0.6,0.45)); +#21823 = VECTOR('',#21824,1.); +#21824 = DIRECTION('',(1.,0.,0.)); +#21825 = PCURVE('',#21159,#21826); +#21826 = DEFINITIONAL_REPRESENTATION('',(#21827),#21831); +#21827 = LINE('',#21828,#21829); +#21828 = CARTESIAN_POINT('',(4.5E-02,0.)); +#21829 = VECTOR('',#21830,1.); +#21830 = DIRECTION('',(0.,1.)); +#21831 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21832 = PCURVE('',#21548,#21833); +#21833 = DEFINITIONAL_REPRESENTATION('',(#21834),#21838); +#21834 = LINE('',#21835,#21836); +#21835 = CARTESIAN_POINT('',(0.,1.2)); +#21836 = VECTOR('',#21837,1.); +#21837 = DIRECTION('',(1.,0.)); +#21838 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21839 = ORIENTED_EDGE('',*,*,#21840,.F.); +#21840 = EDGE_CURVE('',#21144,#21818,#21841,.T.); +#21841 = SURFACE_CURVE('',#21842,(#21846,#21853),.PCURVE_S1.); +#21842 = LINE('',#21843,#21844); +#21843 = CARTESIAN_POINT('',(0.7,0.6,0.405)); +#21844 = VECTOR('',#21845,1.); +#21845 = DIRECTION('',(0.,0.,1.)); +#21846 = PCURVE('',#21159,#21847); +#21847 = DEFINITIONAL_REPRESENTATION('',(#21848),#21852); +#21848 = LINE('',#21849,#21850); +#21849 = CARTESIAN_POINT('',(0.,1.4)); +#21850 = VECTOR('',#21851,1.); +#21851 = DIRECTION('',(1.,0.)); +#21852 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21853 = PCURVE('',#21574,#21854); +#21854 = DEFINITIONAL_REPRESENTATION('',(#21855),#21859); +#21855 = LINE('',#21856,#21857); +#21856 = CARTESIAN_POINT('',(0.,-1.2)); +#21857 = VECTOR('',#21858,1.); +#21858 = DIRECTION('',(1.,0.)); +#21859 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21860 = ADVANCED_FACE('',(#21861),#21285,.T.); +#21861 = FACE_BOUND('',#21862,.T.); +#21862 = EDGE_LOOP('',(#21863,#21864,#21865,#21886)); +#21863 = ORIENTED_EDGE('',*,*,#21271,.T.); +#21864 = ORIENTED_EDGE('',*,*,#21663,.T.); +#21865 = ORIENTED_EDGE('',*,*,#21866,.F.); +#21866 = EDGE_CURVE('',#21302,#21639,#21867,.T.); +#21867 = SURFACE_CURVE('',#21868,(#21872,#21879),.PCURVE_S1.); +#21868 = LINE('',#21869,#21870); +#21869 = CARTESIAN_POINT('',(0.745,-0.6,-2.775557561563E-17)); +#21870 = VECTOR('',#21871,1.); +#21871 = DIRECTION('',(0.,1.,0.)); +#21872 = PCURVE('',#21285,#21873); +#21873 = DEFINITIONAL_REPRESENTATION('',(#21874),#21878); +#21874 = LINE('',#21875,#21876); +#21875 = CARTESIAN_POINT('',(4.712388980385,0.)); +#21876 = VECTOR('',#21877,1.); +#21877 = DIRECTION('',(0.,1.)); +#21878 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21879 = PCURVE('',#21319,#21880); +#21880 = DEFINITIONAL_REPRESENTATION('',(#21881),#21885); +#21881 = LINE('',#21882,#21883); +#21882 = CARTESIAN_POINT('',(4.5E-02,0.)); +#21883 = VECTOR('',#21884,1.); +#21884 = DIRECTION('',(0.,1.)); +#21885 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21886 = ORIENTED_EDGE('',*,*,#21331,.F.); +#21887 = ADVANCED_FACE('',(#21888),#21319,.F.); +#21888 = FACE_BOUND('',#21889,.F.); +#21889 = EDGE_LOOP('',(#21890,#21891,#21892,#21893)); +#21890 = ORIENTED_EDGE('',*,*,#21638,.F.); +#21891 = ORIENTED_EDGE('',*,*,#21866,.F.); +#21892 = ORIENTED_EDGE('',*,*,#21301,.T.); +#21893 = ORIENTED_EDGE('',*,*,#21894,.T.); +#21894 = EDGE_CURVE('',#21304,#21641,#21895,.T.); +#21895 = SURFACE_CURVE('',#21896,(#21900,#21907),.PCURVE_S1.); +#21896 = LINE('',#21897,#21898); +#21897 = CARTESIAN_POINT('',(0.955,-0.6,-2.775557561563E-17)); +#21898 = VECTOR('',#21899,1.); +#21899 = DIRECTION('',(0.,1.,0.)); +#21900 = PCURVE('',#21319,#21901); +#21901 = DEFINITIONAL_REPRESENTATION('',(#21902),#21906); +#21902 = LINE('',#21903,#21904); +#21903 = CARTESIAN_POINT('',(0.255,0.)); +#21904 = VECTOR('',#21905,1.); +#21905 = DIRECTION('',(0.,1.)); +#21906 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21907 = PCURVE('',#21493,#21908); +#21908 = DEFINITIONAL_REPRESENTATION('',(#21909),#21913); +#21909 = LINE('',#21910,#21911); +#21910 = CARTESIAN_POINT('',(1.570796326795,0.)); +#21911 = VECTOR('',#21912,1.); +#21912 = DIRECTION('',(0.,1.)); +#21913 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21914 = ADVANCED_FACE('',(#21915),#21493,.T.); +#21915 = FACE_BOUND('',#21916,.T.); +#21916 = EDGE_LOOP('',(#21917,#21918,#21919,#21920)); +#21917 = ORIENTED_EDGE('',*,*,#21478,.T.); +#21918 = ORIENTED_EDGE('',*,*,#21894,.T.); +#21919 = ORIENTED_EDGE('',*,*,#21790,.F.); +#21920 = ORIENTED_EDGE('',*,*,#21921,.F.); +#21921 = EDGE_CURVE('',#21451,#21768,#21922,.T.); +#21922 = SURFACE_CURVE('',#21923,(#21927,#21934),.PCURVE_S1.); +#21923 = LINE('',#21924,#21925); +#21924 = CARTESIAN_POINT('',(1.,-0.6,4.5E-02)); +#21925 = VECTOR('',#21926,1.); +#21926 = DIRECTION('',(0.,1.,0.)); +#21927 = PCURVE('',#21493,#21928); +#21928 = DEFINITIONAL_REPRESENTATION('',(#21929),#21933); +#21929 = LINE('',#21930,#21931); +#21930 = CARTESIAN_POINT('',(0.,0.)); +#21931 = VECTOR('',#21932,1.); +#21932 = DIRECTION('',(0.,1.)); +#21933 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21934 = PCURVE('',#21466,#21935); +#21935 = DEFINITIONAL_REPRESENTATION('',(#21936),#21940); +#21936 = LINE('',#21937,#21938); +#21937 = CARTESIAN_POINT('',(4.5E-02,0.)); +#21938 = VECTOR('',#21939,1.); +#21939 = DIRECTION('',(0.,-1.)); +#21940 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21941 = ADVANCED_FACE('',(#21942),#21466,.T.); +#21942 = FACE_BOUND('',#21943,.T.); +#21943 = EDGE_LOOP('',(#21944,#21945,#21946,#21947)); +#21944 = ORIENTED_EDGE('',*,*,#21450,.F.); +#21945 = ORIENTED_EDGE('',*,*,#21921,.T.); +#21946 = ORIENTED_EDGE('',*,*,#21767,.T.); +#21947 = ORIENTED_EDGE('',*,*,#21948,.F.); +#21948 = EDGE_CURVE('',#21418,#21740,#21949,.T.); +#21949 = SURFACE_CURVE('',#21950,(#21954,#21961),.PCURVE_S1.); +#21950 = LINE('',#21951,#21952); +#21951 = CARTESIAN_POINT('',(1.,-0.6,0.405)); +#21952 = VECTOR('',#21953,1.); +#21953 = DIRECTION('',(0.,1.,0.)); +#21954 = PCURVE('',#21466,#21955); +#21955 = DEFINITIONAL_REPRESENTATION('',(#21956),#21960); +#21956 = LINE('',#21957,#21958); +#21957 = CARTESIAN_POINT('',(0.405,0.)); +#21958 = VECTOR('',#21959,1.); +#21959 = DIRECTION('',(0.,-1.)); +#21960 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21961 = PCURVE('',#21438,#21962); +#21962 = DEFINITIONAL_REPRESENTATION('',(#21963),#21967); +#21963 = LINE('',#21964,#21965); +#21964 = CARTESIAN_POINT('',(6.28318530718,0.)); +#21965 = VECTOR('',#21966,1.); +#21966 = DIRECTION('',(0.,1.)); +#21967 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21968 = ADVANCED_FACE('',(#21969),#21438,.T.); +#21969 = FACE_BOUND('',#21970,.T.); +#21970 = EDGE_LOOP('',(#21971,#21972,#21973,#21994)); +#21971 = ORIENTED_EDGE('',*,*,#21948,.T.); +#21972 = ORIENTED_EDGE('',*,*,#21739,.T.); +#21973 = ORIENTED_EDGE('',*,*,#21974,.F.); +#21974 = EDGE_CURVE('',#21390,#21717,#21975,.T.); +#21975 = SURFACE_CURVE('',#21976,(#21980,#21987),.PCURVE_S1.); +#21976 = LINE('',#21977,#21978); +#21977 = CARTESIAN_POINT('',(0.955,-0.6,0.45)); +#21978 = VECTOR('',#21979,1.); +#21979 = DIRECTION('',(0.,1.,0.)); +#21980 = PCURVE('',#21438,#21981); +#21981 = DEFINITIONAL_REPRESENTATION('',(#21982),#21986); +#21982 = LINE('',#21983,#21984); +#21983 = CARTESIAN_POINT('',(4.712388980385,0.)); +#21984 = VECTOR('',#21985,1.); +#21985 = DIRECTION('',(0.,1.)); +#21986 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21987 = PCURVE('',#21405,#21988); +#21988 = DEFINITIONAL_REPRESENTATION('',(#21989),#21993); +#21989 = LINE('',#21990,#21991); +#21990 = CARTESIAN_POINT('',(0.255,0.)); +#21991 = VECTOR('',#21992,1.); +#21992 = DIRECTION('',(0.,1.)); +#21993 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#21994 = ORIENTED_EDGE('',*,*,#21417,.F.); +#21995 = ADVANCED_FACE('',(#21996),#21405,.T.); +#21996 = FACE_BOUND('',#21997,.T.); +#21997 = EDGE_LOOP('',(#21998,#21999,#22020,#22021)); +#21998 = ORIENTED_EDGE('',*,*,#21716,.F.); +#21999 = ORIENTED_EDGE('',*,*,#22000,.F.); +#22000 = EDGE_CURVE('',#21361,#21693,#22001,.T.); +#22001 = SURFACE_CURVE('',#22002,(#22006,#22013),.PCURVE_S1.); +#22002 = LINE('',#22003,#22004); +#22003 = CARTESIAN_POINT('',(0.745,-0.6,0.45)); +#22004 = VECTOR('',#22005,1.); +#22005 = DIRECTION('',(0.,1.,0.)); +#22006 = PCURVE('',#21405,#22007); +#22007 = DEFINITIONAL_REPRESENTATION('',(#22008),#22012); +#22008 = LINE('',#22009,#22010); +#22009 = CARTESIAN_POINT('',(4.5E-02,0.)); +#22010 = VECTOR('',#22011,1.); +#22011 = DIRECTION('',(0.,1.)); +#22012 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22013 = PCURVE('',#21377,#22014); +#22014 = DEFINITIONAL_REPRESENTATION('',(#22015),#22019); +#22015 = LINE('',#22016,#22017); +#22016 = CARTESIAN_POINT('',(1.570796326795,0.)); +#22017 = VECTOR('',#22018,1.); +#22018 = DIRECTION('',(0.,1.)); +#22019 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22020 = ORIENTED_EDGE('',*,*,#21389,.T.); +#22021 = ORIENTED_EDGE('',*,*,#21974,.T.); +#22022 = ADVANCED_FACE('',(#22023),#21377,.T.); +#22023 = FACE_BOUND('',#22024,.T.); +#22024 = EDGE_LOOP('',(#22025,#22026,#22027,#22028)); +#22025 = ORIENTED_EDGE('',*,*,#21360,.T.); +#22026 = ORIENTED_EDGE('',*,*,#22000,.T.); +#22027 = ORIENTED_EDGE('',*,*,#21692,.F.); +#22028 = ORIENTED_EDGE('',*,*,#22029,.F.); +#22029 = EDGE_CURVE('',#20956,#21144,#22030,.T.); +#22030 = SURFACE_CURVE('',#22031,(#22035,#22042),.PCURVE_S1.); +#22031 = LINE('',#22032,#22033); +#22032 = CARTESIAN_POINT('',(0.7,-0.6,0.405)); +#22033 = VECTOR('',#22034,1.); +#22034 = DIRECTION('',(0.,1.,0.)); +#22035 = PCURVE('',#21377,#22036); +#22036 = DEFINITIONAL_REPRESENTATION('',(#22037),#22041); +#22037 = LINE('',#22038,#22039); +#22038 = CARTESIAN_POINT('',(0.,0.)); +#22039 = VECTOR('',#22040,1.); +#22040 = DIRECTION('',(0.,1.)); +#22041 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22042 = PCURVE('',#21574,#22043); +#22043 = DEFINITIONAL_REPRESENTATION('',(#22044),#22048); +#22044 = LINE('',#22045,#22046); +#22045 = CARTESIAN_POINT('',(0.,0.)); +#22046 = VECTOR('',#22047,1.); +#22047 = DIRECTION('',(0.,-1.)); +#22048 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22049 = ADVANCED_FACE('',(#22050),#21574,.T.); +#22050 = FACE_BOUND('',#22051,.T.); +#22051 = EDGE_LOOP('',(#22052,#22053,#22054,#22055)); +#22052 = ORIENTED_EDGE('',*,*,#21560,.F.); +#22053 = ORIENTED_EDGE('',*,*,#22029,.T.); +#22054 = ORIENTED_EDGE('',*,*,#21840,.T.); +#22055 = ORIENTED_EDGE('',*,*,#22056,.F.); +#22056 = EDGE_CURVE('',#21533,#21818,#22057,.T.); +#22057 = SURFACE_CURVE('',#22058,(#22062,#22069),.PCURVE_S1.); +#22058 = LINE('',#22059,#22060); +#22059 = CARTESIAN_POINT('',(0.7,-0.6,0.45)); +#22060 = VECTOR('',#22061,1.); +#22061 = DIRECTION('',(0.,1.,0.)); +#22062 = PCURVE('',#21574,#22063); +#22063 = DEFINITIONAL_REPRESENTATION('',(#22064),#22068); +#22064 = LINE('',#22065,#22066); +#22065 = CARTESIAN_POINT('',(4.5E-02,0.)); +#22066 = VECTOR('',#22067,1.); +#22067 = DIRECTION('',(0.,-1.)); +#22068 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22069 = PCURVE('',#21548,#22070); +#22070 = DEFINITIONAL_REPRESENTATION('',(#22071),#22075); +#22071 = LINE('',#22072,#22073); +#22072 = CARTESIAN_POINT('',(1.4,0.)); +#22073 = VECTOR('',#22074,1.); +#22074 = DIRECTION('',(0.,1.)); +#22075 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22076 = ADVANCED_FACE('',(#22077),#21548,.T.); +#22077 = FACE_BOUND('',#22078,.T.); +#22078 = EDGE_LOOP('',(#22079,#22080,#22081,#22082)); +#22079 = ORIENTED_EDGE('',*,*,#21614,.F.); +#22080 = ORIENTED_EDGE('',*,*,#21532,.T.); +#22081 = ORIENTED_EDGE('',*,*,#22056,.T.); +#22082 = ORIENTED_EDGE('',*,*,#21817,.F.); +#22083 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#22087)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#22084,#22085,#22086)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#22084 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#22085 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#22086 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#22087 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-02),#22084, + 'distance_accuracy_value','confusion accuracy'); +#22088 = SHAPE_DEFINITION_REPRESENTATION(#22089,#20240); +#22089 = PRODUCT_DEFINITION_SHAPE('','',#22090); +#22090 = PRODUCT_DEFINITION('design','',#22091,#22094); +#22091 = PRODUCT_DEFINITION_FORMATION('','',#22092); +#22092 = PRODUCT('SOLID','SOLID','',(#22093)); +#22093 = PRODUCT_CONTEXT('',#2,'mechanical'); +#22094 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#22095 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#22096,#22098); +#22096 = ( REPRESENTATION_RELATIONSHIP('','',#20240,#20230) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#22097) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#22097 = ITEM_DEFINED_TRANSFORMATION('','',#11,#20231); +#22098 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #22099); +#22099 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('9','=>[0:1:1:9]','',#20225, + #22090,$); +#22100 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#22092)); +#22101 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#22102,#22104); +#22102 = ( REPRESENTATION_RELATIONSHIP('','',#20230,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#22103) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#22103 = ITEM_DEFINED_TRANSFORMATION('','',#11,#35); +#22104 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #22105); +#22105 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('10','','',#5,#20225,$); +#22106 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#20227)); +#22107 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#22108,#22110); +#22108 = ( REPRESENTATION_RELATIONSHIP('','',#20230,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#22109) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#22109 = ITEM_DEFINED_TRANSFORMATION('','',#11,#39); +#22110 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #22111); +#22111 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('11','','',#5,#20225,$); +#22112 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#22113,#22115); +#22113 = ( REPRESENTATION_RELATIONSHIP('','',#20230,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#22114) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#22114 = ITEM_DEFINED_TRANSFORMATION('','',#11,#43); +#22115 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #22116); +#22116 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('12','','',#5,#20225,$); +#22117 = SHAPE_DEFINITION_REPRESENTATION(#22118,#22124); +#22118 = PRODUCT_DEFINITION_SHAPE('','',#22119); +#22119 = PRODUCT_DEFINITION('design','',#22120,#22123); +#22120 = PRODUCT_DEFINITION_FORMATION('','',#22121); +#22121 = PRODUCT('D_SOD-323','D_SOD-323','',(#22122)); +#22122 = PRODUCT_CONTEXT('',#2,'mechanical'); +#22123 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#22124 = SHAPE_REPRESENTATION('',(#11,#22125),#22129); +#22125 = AXIS2_PLACEMENT_3D('',#22126,#22127,#22128); +#22126 = CARTESIAN_POINT('',(0.,0.,0.)); +#22127 = DIRECTION('',(0.,0.,1.)); +#22128 = DIRECTION('',(1.,0.,-0.)); +#22129 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#22133)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#22130,#22131,#22132)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#22130 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#22131 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#22132 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#22133 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-02),#22130, + 'distance_accuracy_value','confusion accuracy'); +#22134 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#22135),#26283); +#22135 = MANIFOLD_SOLID_BREP('',#22136); +#22136 = CLOSED_SHELL('',(#22137,#22257,#22365,#22443,#22644,#22820, + #22949,#22976,#23032,#23084,#23111,#23138,#23165,#23172,#23228, + #23409,#23457,#23505,#23561,#23634,#23682,#23734,#23785,#23915, + #23968,#23995,#24043,#24075,#24132,#24178,#24258,#24310,#24356, + #24434,#24512,#24598,#24630,#24662,#24714,#24761,#25030,#25056, + #25103,#25176,#25405,#25599,#25667,#25694,#25720,#25746,#25772, + #25839,#25865,#25872,#25879,#25955,#26004,#26053,#26080,#26107, + #26134,#26161,#26188,#26215,#26242,#26269,#26276)); +#22137 = ADVANCED_FACE('',(#22138),#22152,.F.); +#22138 = FACE_BOUND('',#22139,.F.); +#22139 = EDGE_LOOP('',(#22140,#22175,#22203,#22231)); +#22140 = ORIENTED_EDGE('',*,*,#22141,.T.); +#22141 = EDGE_CURVE('',#22142,#22144,#22146,.T.); +#22142 = VERTEX_POINT('',#22143); +#22143 = CARTESIAN_POINT('',(0.92,0.175,0.455)); +#22144 = VERTEX_POINT('',#22145); +#22145 = CARTESIAN_POINT('',(0.92,-0.175,0.455)); +#22146 = SURFACE_CURVE('',#22147,(#22151,#22163),.PCURVE_S1.); +#22147 = LINE('',#22148,#22149); +#22148 = CARTESIAN_POINT('',(0.92,0.175,0.455)); +#22149 = VECTOR('',#22150,1.); +#22150 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#22151 = PCURVE('',#22152,#22157); +#22152 = PLANE('',#22153); +#22153 = AXIS2_PLACEMENT_3D('',#22154,#22155,#22156); +#22154 = CARTESIAN_POINT('',(0.92,0.175,0.455)); +#22155 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#22156 = DIRECTION('',(0.,-0.,-1.)); +#22157 = DEFINITIONAL_REPRESENTATION('',(#22158),#22162); +#22158 = LINE('',#22159,#22160); +#22159 = CARTESIAN_POINT('',(0.,0.)); +#22160 = VECTOR('',#22161,1.); +#22161 = DIRECTION('',(0.,-1.)); +#22162 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22163 = PCURVE('',#22164,#22169); +#22164 = CYLINDRICAL_SURFACE('',#22165,7.E-02); +#22165 = AXIS2_PLACEMENT_3D('',#22166,#22167,#22168); +#22166 = CARTESIAN_POINT('',(0.85,0.175,0.455)); +#22167 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#22168 = DIRECTION('',(0.,-0.,1.)); +#22169 = DEFINITIONAL_REPRESENTATION('',(#22170),#22174); +#22170 = LINE('',#22171,#22172); +#22171 = CARTESIAN_POINT('',(1.570796326795,0.)); +#22172 = VECTOR('',#22173,1.); +#22173 = DIRECTION('',(0.,-1.)); +#22174 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22175 = ORIENTED_EDGE('',*,*,#22176,.T.); +#22176 = EDGE_CURVE('',#22144,#22177,#22179,.T.); +#22177 = VERTEX_POINT('',#22178); +#22178 = CARTESIAN_POINT('',(0.92,-0.175,0.22)); +#22179 = SURFACE_CURVE('',#22180,(#22184,#22191),.PCURVE_S1.); +#22180 = LINE('',#22181,#22182); +#22181 = CARTESIAN_POINT('',(0.92,-0.175,0.455)); +#22182 = VECTOR('',#22183,1.); +#22183 = DIRECTION('',(0.,-0.,-1.)); +#22184 = PCURVE('',#22152,#22185); +#22185 = DEFINITIONAL_REPRESENTATION('',(#22186),#22190); +#22186 = LINE('',#22187,#22188); +#22187 = CARTESIAN_POINT('',(0.,-0.35)); +#22188 = VECTOR('',#22189,1.); +#22189 = DIRECTION('',(1.,0.)); +#22190 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22191 = PCURVE('',#22192,#22197); +#22192 = PLANE('',#22193); +#22193 = AXIS2_PLACEMENT_3D('',#22194,#22195,#22196); +#22194 = CARTESIAN_POINT('',(1.013084179351,-0.175,0.321676343068)); +#22195 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#22196 = DIRECTION('',(0.,0.,1.)); +#22197 = DEFINITIONAL_REPRESENTATION('',(#22198),#22202); +#22198 = LINE('',#22199,#22200); +#22199 = CARTESIAN_POINT('',(0.133323656932,9.3084179351E-02)); +#22200 = VECTOR('',#22201,1.); +#22201 = DIRECTION('',(-1.,0.)); +#22202 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22203 = ORIENTED_EDGE('',*,*,#22204,.F.); +#22204 = EDGE_CURVE('',#22205,#22177,#22207,.T.); +#22205 = VERTEX_POINT('',#22206); +#22206 = CARTESIAN_POINT('',(0.92,0.175,0.22)); +#22207 = SURFACE_CURVE('',#22208,(#22212,#22219),.PCURVE_S1.); +#22208 = LINE('',#22209,#22210); +#22209 = CARTESIAN_POINT('',(0.92,0.175,0.22)); +#22210 = VECTOR('',#22211,1.); +#22211 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#22212 = PCURVE('',#22152,#22213); +#22213 = DEFINITIONAL_REPRESENTATION('',(#22214),#22218); +#22214 = LINE('',#22215,#22216); +#22215 = CARTESIAN_POINT('',(0.235,0.)); +#22216 = VECTOR('',#22217,1.); +#22217 = DIRECTION('',(0.,-1.)); +#22218 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22219 = PCURVE('',#22220,#22225); +#22220 = CYLINDRICAL_SURFACE('',#22221,0.22); +#22221 = AXIS2_PLACEMENT_3D('',#22222,#22223,#22224); +#22222 = CARTESIAN_POINT('',(1.14,0.175,0.22)); +#22223 = DIRECTION('',(2.22044604925E-16,1.,-0.)); +#22224 = DIRECTION('',(-1.,2.22044604925E-16,1.261617073438E-16)); +#22225 = DEFINITIONAL_REPRESENTATION('',(#22226),#22230); +#22226 = LINE('',#22227,#22228); +#22227 = CARTESIAN_POINT('',(6.28318530718,-5.551115123126E-17)); +#22228 = VECTOR('',#22229,1.); +#22229 = DIRECTION('',(0.,-1.)); +#22230 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22231 = ORIENTED_EDGE('',*,*,#22232,.F.); +#22232 = EDGE_CURVE('',#22142,#22205,#22233,.T.); +#22233 = SURFACE_CURVE('',#22234,(#22238,#22245),.PCURVE_S1.); +#22234 = LINE('',#22235,#22236); +#22235 = CARTESIAN_POINT('',(0.92,0.175,0.455)); +#22236 = VECTOR('',#22237,1.); +#22237 = DIRECTION('',(0.,-0.,-1.)); +#22238 = PCURVE('',#22152,#22239); +#22239 = DEFINITIONAL_REPRESENTATION('',(#22240),#22244); +#22240 = LINE('',#22241,#22242); +#22241 = CARTESIAN_POINT('',(0.,0.)); +#22242 = VECTOR('',#22243,1.); +#22243 = DIRECTION('',(1.,0.)); +#22244 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22245 = PCURVE('',#22246,#22251); +#22246 = PLANE('',#22247); +#22247 = AXIS2_PLACEMENT_3D('',#22248,#22249,#22250); +#22248 = CARTESIAN_POINT('',(1.013084179351,0.175,0.321676343068)); +#22249 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#22250 = DIRECTION('',(0.,0.,1.)); +#22251 = DEFINITIONAL_REPRESENTATION('',(#22252),#22256); +#22252 = LINE('',#22253,#22254); +#22253 = CARTESIAN_POINT('',(0.133323656932,9.3084179351E-02)); +#22254 = VECTOR('',#22255,1.); +#22255 = DIRECTION('',(-1.,0.)); +#22256 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22257 = ADVANCED_FACE('',(#22258),#22164,.F.); +#22258 = FACE_BOUND('',#22259,.F.); +#22259 = EDGE_LOOP('',(#22260,#22312,#22338,#22339)); +#22260 = ORIENTED_EDGE('',*,*,#22261,.T.); +#22261 = EDGE_CURVE('',#22262,#22264,#22266,.T.); +#22262 = VERTEX_POINT('',#22263); +#22263 = CARTESIAN_POINT('',(0.85,0.175,0.525)); +#22264 = VERTEX_POINT('',#22265); +#22265 = CARTESIAN_POINT('',(0.85,-0.175,0.525)); +#22266 = SURFACE_CURVE('',#22267,(#22271,#22300),.PCURVE_S1.); +#22267 = LINE('',#22268,#22269); +#22268 = CARTESIAN_POINT('',(0.85,0.175,0.525)); +#22269 = VECTOR('',#22270,1.); +#22270 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#22271 = PCURVE('',#22164,#22272); +#22272 = DEFINITIONAL_REPRESENTATION('',(#22273),#22299); +#22273 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#22274,#22275,#22276,#22277, + #22278,#22279,#22280,#22281,#22282,#22283,#22284,#22285,#22286, + #22287,#22288,#22289,#22290,#22291,#22292,#22293,#22294,#22295, + #22296,#22297,#22298),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1 + ,1,1,1,1,1,1,1,1,1,1,4),(0.,1.590909090909E-02,3.181818181818E-02, + 4.772727272727E-02,6.363636363636E-02,7.954545454545E-02, + 9.545454545455E-02,0.111363636364,0.127272727273,0.143181818182, + 0.159090909091,0.175,0.190909090909,0.206818181818,0.222727272727, + 0.238636363636,0.254545454545,0.270454545455,0.286363636364, + 0.302272727273,0.318181818182,0.334090909091,0.35), + .QUASI_UNIFORM_KNOTS.); +#22274 = CARTESIAN_POINT('',(0.,0.)); +#22275 = CARTESIAN_POINT('',(0.,-5.30303030303E-03)); +#22276 = CARTESIAN_POINT('',(-8.881784197001E-16,-1.590909090909E-02)); +#22277 = CARTESIAN_POINT('',(8.881784197001E-16,-3.181818181818E-02)); +#22278 = CARTESIAN_POINT('',(0.,-4.772727272727E-02)); +#22279 = CARTESIAN_POINT('',(0.,-6.363636363636E-02)); +#22280 = CARTESIAN_POINT('',(0.,-7.954545454545E-02)); +#22281 = CARTESIAN_POINT('',(0.,-9.545454545455E-02)); +#22282 = CARTESIAN_POINT('',(0.,-0.111363636364)); +#22283 = CARTESIAN_POINT('',(0.,-0.127272727273)); +#22284 = CARTESIAN_POINT('',(0.,-0.143181818182)); +#22285 = CARTESIAN_POINT('',(1.7763568394E-15,-0.159090909091)); +#22286 = CARTESIAN_POINT('',(-8.881784197001E-16,-0.175)); +#22287 = CARTESIAN_POINT('',(-8.881784197001E-16,-0.190909090909)); +#22288 = CARTESIAN_POINT('',(8.881784197001E-16,-0.206818181818)); +#22289 = CARTESIAN_POINT('',(-8.881784197001E-16,-0.222727272727)); +#22290 = CARTESIAN_POINT('',(1.7763568394E-15,-0.238636363636)); +#22291 = CARTESIAN_POINT('',(-1.7763568394E-15,-0.254545454545)); +#22292 = CARTESIAN_POINT('',(-1.7763568394E-15,-0.270454545455)); +#22293 = CARTESIAN_POINT('',(-8.881784197001E-16,-0.286363636364)); +#22294 = CARTESIAN_POINT('',(-3.552713678801E-15,-0.302272727273)); +#22295 = CARTESIAN_POINT('',(-8.881784197001E-16,-0.318181818182)); +#22296 = CARTESIAN_POINT('',(-3.552713678801E-15,-0.334090909091)); +#22297 = CARTESIAN_POINT('',(-8.881784197001E-16,-0.344696969697)); +#22298 = CARTESIAN_POINT('',(0.,-0.35)); +#22299 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22300 = PCURVE('',#22301,#22306); +#22301 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#22302,#22303) + ,(#22304,#22305 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.06),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#22302 = CARTESIAN_POINT('',(0.790270145251,0.500135072626,0.1)); +#22303 = CARTESIAN_POINT('',(0.85,0.53,0.525)); +#22304 = CARTESIAN_POINT('',(0.790270145251,-0.500135072626,0.1)); +#22305 = CARTESIAN_POINT('',(0.85,-0.53,0.525)); +#22306 = DEFINITIONAL_REPRESENTATION('',(#22307),#22311); +#22307 = LINE('',#22308,#22309); +#22308 = CARTESIAN_POINT('',(0.355,1.)); +#22309 = VECTOR('',#22310,1.); +#22310 = DIRECTION('',(1.,3.172065784643E-16)); +#22311 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22312 = ORIENTED_EDGE('',*,*,#22313,.T.); +#22313 = EDGE_CURVE('',#22264,#22144,#22314,.T.); +#22314 = SURFACE_CURVE('',#22315,(#22320,#22327),.PCURVE_S1.); +#22315 = CIRCLE('',#22316,7.E-02); +#22316 = AXIS2_PLACEMENT_3D('',#22317,#22318,#22319); +#22317 = CARTESIAN_POINT('',(0.85,-0.175,0.455)); +#22318 = DIRECTION('',(2.22044604925E-16,1.,-0.)); +#22319 = DIRECTION('',(0.,0.,1.)); +#22320 = PCURVE('',#22164,#22321); +#22321 = DEFINITIONAL_REPRESENTATION('',(#22322),#22326); +#22322 = LINE('',#22323,#22324); +#22323 = CARTESIAN_POINT('',(0.,-0.35)); +#22324 = VECTOR('',#22325,1.); +#22325 = DIRECTION('',(1.,0.)); +#22326 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22327 = PCURVE('',#22192,#22328); +#22328 = DEFINITIONAL_REPRESENTATION('',(#22329),#22337); +#22329 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#22330,#22331,#22332,#22333 + ,#22334,#22335,#22336),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#22330 = CARTESIAN_POINT('',(0.203323656932,0.163084179351)); +#22331 = CARTESIAN_POINT('',(0.203323656932,4.184062282118E-02)); +#22332 = CARTESIAN_POINT('',(9.8323656932E-02,0.102462401086)); +#22333 = CARTESIAN_POINT('',(-6.676343068E-03,0.163084179351)); +#22334 = CARTESIAN_POINT('',(9.8323656932E-02,0.223705957616)); +#22335 = CARTESIAN_POINT('',(0.203323656932,0.284327735881)); +#22336 = CARTESIAN_POINT('',(0.203323656932,0.163084179351)); +#22337 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22338 = ORIENTED_EDGE('',*,*,#22141,.F.); +#22339 = ORIENTED_EDGE('',*,*,#22340,.F.); +#22340 = EDGE_CURVE('',#22262,#22142,#22341,.T.); +#22341 = SURFACE_CURVE('',#22342,(#22347,#22354),.PCURVE_S1.); +#22342 = CIRCLE('',#22343,7.E-02); +#22343 = AXIS2_PLACEMENT_3D('',#22344,#22345,#22346); +#22344 = CARTESIAN_POINT('',(0.85,0.175,0.455)); +#22345 = DIRECTION('',(2.22044604925E-16,1.,-0.)); +#22346 = DIRECTION('',(0.,0.,1.)); +#22347 = PCURVE('',#22164,#22348); +#22348 = DEFINITIONAL_REPRESENTATION('',(#22349),#22353); +#22349 = LINE('',#22350,#22351); +#22350 = CARTESIAN_POINT('',(0.,0.)); +#22351 = VECTOR('',#22352,1.); +#22352 = DIRECTION('',(1.,-1.766974823035E-17)); +#22353 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22354 = PCURVE('',#22246,#22355); +#22355 = DEFINITIONAL_REPRESENTATION('',(#22356),#22364); +#22356 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#22357,#22358,#22359,#22360 + ,#22361,#22362,#22363),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#22357 = CARTESIAN_POINT('',(0.203323656932,0.163084179351)); +#22358 = CARTESIAN_POINT('',(0.203323656932,4.184062282118E-02)); +#22359 = CARTESIAN_POINT('',(9.8323656932E-02,0.102462401086)); +#22360 = CARTESIAN_POINT('',(-6.676343068E-03,0.163084179351)); +#22361 = CARTESIAN_POINT('',(9.8323656932E-02,0.223705957616)); +#22362 = CARTESIAN_POINT('',(0.203323656932,0.284327735881)); +#22363 = CARTESIAN_POINT('',(0.203323656932,0.163084179351)); +#22364 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22365 = ADVANCED_FACE('',(#22366),#22220,.T.); +#22366 = FACE_BOUND('',#22367,.T.); +#22367 = EDGE_LOOP('',(#22368,#22392,#22420,#22442)); +#22368 = ORIENTED_EDGE('',*,*,#22369,.T.); +#22369 = EDGE_CURVE('',#22205,#22370,#22372,.T.); +#22370 = VERTEX_POINT('',#22371); +#22371 = CARTESIAN_POINT('',(1.14,0.175,0.)); +#22372 = SURFACE_CURVE('',#22373,(#22378,#22385),.PCURVE_S1.); +#22373 = CIRCLE('',#22374,0.22); +#22374 = AXIS2_PLACEMENT_3D('',#22375,#22376,#22377); +#22375 = CARTESIAN_POINT('',(1.14,0.175,0.22)); +#22376 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#22377 = DIRECTION('',(-1.,2.22044604925E-16,1.261617073438E-16)); +#22378 = PCURVE('',#22220,#22379); +#22379 = DEFINITIONAL_REPRESENTATION('',(#22380),#22384); +#22380 = LINE('',#22381,#22382); +#22381 = CARTESIAN_POINT('',(6.28318530718,0.)); +#22382 = VECTOR('',#22383,1.); +#22383 = DIRECTION('',(-1.,0.)); +#22384 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22385 = PCURVE('',#22246,#22386); +#22386 = DEFINITIONAL_REPRESENTATION('',(#22387),#22391); +#22387 = CIRCLE('',#22388,0.22); +#22388 = AXIS2_PLACEMENT_2D('',#22389,#22390); +#22389 = CARTESIAN_POINT('',(-0.101676343068,-0.126915820649)); +#22390 = DIRECTION('',(1.261617073438E-16,1.)); +#22391 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22392 = ORIENTED_EDGE('',*,*,#22393,.T.); +#22393 = EDGE_CURVE('',#22370,#22394,#22396,.T.); +#22394 = VERTEX_POINT('',#22395); +#22395 = CARTESIAN_POINT('',(1.14,-0.175,0.)); +#22396 = SURFACE_CURVE('',#22397,(#22401,#22408),.PCURVE_S1.); +#22397 = LINE('',#22398,#22399); +#22398 = CARTESIAN_POINT('',(1.14,0.175,0.)); +#22399 = VECTOR('',#22400,1.); +#22400 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#22401 = PCURVE('',#22220,#22402); +#22402 = DEFINITIONAL_REPRESENTATION('',(#22403),#22407); +#22403 = LINE('',#22404,#22405); +#22404 = CARTESIAN_POINT('',(4.712388980385,0.)); +#22405 = VECTOR('',#22406,1.); +#22406 = DIRECTION('',(0.,-1.)); +#22407 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22408 = PCURVE('',#22409,#22414); +#22409 = PLANE('',#22410); +#22410 = AXIS2_PLACEMENT_3D('',#22411,#22412,#22413); +#22411 = CARTESIAN_POINT('',(1.14,0.175,0.)); +#22412 = DIRECTION('',(0.,0.,1.)); +#22413 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#22414 = DEFINITIONAL_REPRESENTATION('',(#22415),#22419); +#22415 = LINE('',#22416,#22417); +#22416 = CARTESIAN_POINT('',(0.,0.)); +#22417 = VECTOR('',#22418,1.); +#22418 = DIRECTION('',(0.,-1.)); +#22419 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22420 = ORIENTED_EDGE('',*,*,#22421,.F.); +#22421 = EDGE_CURVE('',#22177,#22394,#22422,.T.); +#22422 = SURFACE_CURVE('',#22423,(#22428,#22435),.PCURVE_S1.); +#22423 = CIRCLE('',#22424,0.22); +#22424 = AXIS2_PLACEMENT_3D('',#22425,#22426,#22427); +#22425 = CARTESIAN_POINT('',(1.14,-0.175,0.22)); +#22426 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#22427 = DIRECTION('',(-1.,2.22044604925E-16,1.261617073438E-16)); +#22428 = PCURVE('',#22220,#22429); +#22429 = DEFINITIONAL_REPRESENTATION('',(#22430),#22434); +#22430 = LINE('',#22431,#22432); +#22431 = CARTESIAN_POINT('',(6.28318530718,-0.35)); +#22432 = VECTOR('',#22433,1.); +#22433 = DIRECTION('',(-1.,0.)); +#22434 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22435 = PCURVE('',#22192,#22436); +#22436 = DEFINITIONAL_REPRESENTATION('',(#22437),#22441); +#22437 = CIRCLE('',#22438,0.22); +#22438 = AXIS2_PLACEMENT_2D('',#22439,#22440); +#22439 = CARTESIAN_POINT('',(-0.101676343068,-0.126915820649)); +#22440 = DIRECTION('',(1.261617073438E-16,1.)); +#22441 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22442 = ORIENTED_EDGE('',*,*,#22204,.F.); +#22443 = ADVANCED_FACE('',(#22444),#22246,.F.); +#22444 = FACE_BOUND('',#22445,.F.); +#22445 = EDGE_LOOP('',(#22446,#22474,#22475,#22476,#22477,#22500,#22528, + #22556,#22589,#22617)); +#22446 = ORIENTED_EDGE('',*,*,#22447,.F.); +#22447 = EDGE_CURVE('',#22262,#22448,#22450,.T.); +#22448 = VERTEX_POINT('',#22449); +#22449 = CARTESIAN_POINT('',(0.85,0.175,0.675)); +#22450 = SURFACE_CURVE('',#22451,(#22455,#22462),.PCURVE_S1.); +#22451 = LINE('',#22452,#22453); +#22452 = CARTESIAN_POINT('',(0.85,0.175,0.498338171534)); +#22453 = VECTOR('',#22454,1.); +#22454 = DIRECTION('',(0.,0.,1.)); +#22455 = PCURVE('',#22246,#22456); +#22456 = DEFINITIONAL_REPRESENTATION('',(#22457),#22461); +#22457 = LINE('',#22458,#22459); +#22458 = CARTESIAN_POINT('',(0.176661828466,0.163084179351)); +#22459 = VECTOR('',#22460,1.); +#22460 = DIRECTION('',(1.,0.)); +#22461 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22462 = PCURVE('',#22463,#22468); +#22463 = PLANE('',#22464); +#22464 = AXIS2_PLACEMENT_3D('',#22465,#22466,#22467); +#22465 = CARTESIAN_POINT('',(0.85,0.53,0.675)); +#22466 = DIRECTION('',(-1.,0.,0.)); +#22467 = DIRECTION('',(0.,-1.,0.)); +#22468 = DEFINITIONAL_REPRESENTATION('',(#22469),#22473); +#22469 = LINE('',#22470,#22471); +#22470 = CARTESIAN_POINT('',(0.355,-0.176661828466)); +#22471 = VECTOR('',#22472,1.); +#22472 = DIRECTION('',(0.,1.)); +#22473 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22474 = ORIENTED_EDGE('',*,*,#22340,.T.); +#22475 = ORIENTED_EDGE('',*,*,#22232,.T.); +#22476 = ORIENTED_EDGE('',*,*,#22369,.T.); +#22477 = ORIENTED_EDGE('',*,*,#22478,.T.); +#22478 = EDGE_CURVE('',#22370,#22479,#22481,.T.); +#22479 = VERTEX_POINT('',#22480); +#22480 = CARTESIAN_POINT('',(1.25,0.175,0.)); +#22481 = SURFACE_CURVE('',#22482,(#22486,#22493),.PCURVE_S1.); +#22482 = LINE('',#22483,#22484); +#22483 = CARTESIAN_POINT('',(1.14,0.175,0.)); +#22484 = VECTOR('',#22485,1.); +#22485 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#22486 = PCURVE('',#22246,#22487); +#22487 = DEFINITIONAL_REPRESENTATION('',(#22488),#22492); +#22488 = LINE('',#22489,#22490); +#22489 = CARTESIAN_POINT('',(-0.321676343068,-0.126915820649)); +#22490 = VECTOR('',#22491,1.); +#22491 = DIRECTION('',(0.,-1.)); +#22492 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22493 = PCURVE('',#22409,#22494); +#22494 = DEFINITIONAL_REPRESENTATION('',(#22495),#22499); +#22495 = LINE('',#22496,#22497); +#22496 = CARTESIAN_POINT('',(0.,0.)); +#22497 = VECTOR('',#22498,1.); +#22498 = DIRECTION('',(1.,0.)); +#22499 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22500 = ORIENTED_EDGE('',*,*,#22501,.T.); +#22501 = EDGE_CURVE('',#22479,#22502,#22504,.T.); +#22502 = VERTEX_POINT('',#22503); +#22503 = CARTESIAN_POINT('',(1.25,0.175,0.15)); +#22504 = SURFACE_CURVE('',#22505,(#22509,#22516),.PCURVE_S1.); +#22505 = LINE('',#22506,#22507); +#22506 = CARTESIAN_POINT('',(1.25,0.175,0.)); +#22507 = VECTOR('',#22508,1.); +#22508 = DIRECTION('',(0.,0.,1.)); +#22509 = PCURVE('',#22246,#22510); +#22510 = DEFINITIONAL_REPRESENTATION('',(#22511),#22515); +#22511 = LINE('',#22512,#22513); +#22512 = CARTESIAN_POINT('',(-0.321676343068,-0.236915820649)); +#22513 = VECTOR('',#22514,1.); +#22514 = DIRECTION('',(1.,0.)); +#22515 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22516 = PCURVE('',#22517,#22522); +#22517 = PLANE('',#22518); +#22518 = AXIS2_PLACEMENT_3D('',#22519,#22520,#22521); +#22519 = CARTESIAN_POINT('',(1.25,0.175,0.)); +#22520 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#22521 = DIRECTION('',(0.,0.,1.)); +#22522 = DEFINITIONAL_REPRESENTATION('',(#22523),#22527); +#22523 = LINE('',#22524,#22525); +#22524 = CARTESIAN_POINT('',(0.,0.)); +#22525 = VECTOR('',#22526,1.); +#22526 = DIRECTION('',(1.,0.)); +#22527 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22528 = ORIENTED_EDGE('',*,*,#22529,.T.); +#22529 = EDGE_CURVE('',#22502,#22530,#22532,.T.); +#22530 = VERTEX_POINT('',#22531); +#22531 = CARTESIAN_POINT('',(1.14,0.175,0.15)); +#22532 = SURFACE_CURVE('',#22533,(#22537,#22544),.PCURVE_S1.); +#22533 = LINE('',#22534,#22535); +#22534 = CARTESIAN_POINT('',(1.25,0.175,0.15)); +#22535 = VECTOR('',#22536,1.); +#22536 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#22537 = PCURVE('',#22246,#22538); +#22538 = DEFINITIONAL_REPRESENTATION('',(#22539),#22543); +#22539 = LINE('',#22540,#22541); +#22540 = CARTESIAN_POINT('',(-0.171676343068,-0.236915820649)); +#22541 = VECTOR('',#22542,1.); +#22542 = DIRECTION('',(0.,1.)); +#22543 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22544 = PCURVE('',#22545,#22550); +#22545 = PLANE('',#22546); +#22546 = AXIS2_PLACEMENT_3D('',#22547,#22548,#22549); +#22547 = CARTESIAN_POINT('',(1.25,0.175,0.15)); +#22548 = DIRECTION('',(0.,-0.,-1.)); +#22549 = DIRECTION('',(-1.,2.22044604925E-16,-0.)); +#22550 = DEFINITIONAL_REPRESENTATION('',(#22551),#22555); +#22551 = LINE('',#22552,#22553); +#22552 = CARTESIAN_POINT('',(0.,0.)); +#22553 = VECTOR('',#22554,1.); +#22554 = DIRECTION('',(1.,0.)); +#22555 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22556 = ORIENTED_EDGE('',*,*,#22557,.T.); +#22557 = EDGE_CURVE('',#22530,#22558,#22560,.T.); +#22558 = VERTEX_POINT('',#22559); +#22559 = CARTESIAN_POINT('',(1.07,0.175,0.22)); +#22560 = SURFACE_CURVE('',#22561,(#22566,#22577),.PCURVE_S1.); +#22561 = CIRCLE('',#22562,7.E-02); +#22562 = AXIS2_PLACEMENT_3D('',#22563,#22564,#22565); +#22563 = CARTESIAN_POINT('',(1.14,0.175,0.22)); +#22564 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#22565 = DIRECTION('',(-1.586032892322E-15,3.521700469737E-31,-1.)); +#22566 = PCURVE('',#22246,#22567); +#22567 = DEFINITIONAL_REPRESENTATION('',(#22568),#22576); +#22568 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#22569,#22570,#22571,#22572 + ,#22573,#22574,#22575),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#22569 = CARTESIAN_POINT('',(-0.171676343068,-0.126915820649)); +#22570 = CARTESIAN_POINT('',(-0.171676343068,-5.672264119178E-03)); +#22571 = CARTESIAN_POINT('',(-6.6676343068E-02,-6.629404238409E-02)); +#22572 = CARTESIAN_POINT('',(3.8323656932E-02,-0.126915820649)); +#22573 = CARTESIAN_POINT('',(-6.6676343068E-02,-0.187537598914)); +#22574 = CARTESIAN_POINT('',(-0.171676343068,-0.248159377179)); +#22575 = CARTESIAN_POINT('',(-0.171676343068,-0.126915820649)); +#22576 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22577 = PCURVE('',#22578,#22583); +#22578 = CYLINDRICAL_SURFACE('',#22579,7.E-02); +#22579 = AXIS2_PLACEMENT_3D('',#22580,#22581,#22582); +#22580 = CARTESIAN_POINT('',(1.14,0.175,0.22)); +#22581 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#22582 = DIRECTION('',(-1.586032892322E-15,3.521700469737E-31,-1.)); +#22583 = DEFINITIONAL_REPRESENTATION('',(#22584),#22588); +#22584 = LINE('',#22585,#22586); +#22585 = CARTESIAN_POINT('',(0.,0.)); +#22586 = VECTOR('',#22587,1.); +#22587 = DIRECTION('',(1.,1.766974823035E-17)); +#22588 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22589 = ORIENTED_EDGE('',*,*,#22590,.T.); +#22590 = EDGE_CURVE('',#22558,#22591,#22593,.T.); +#22591 = VERTEX_POINT('',#22592); +#22592 = CARTESIAN_POINT('',(1.07,0.175,0.455)); +#22593 = SURFACE_CURVE('',#22594,(#22598,#22605),.PCURVE_S1.); +#22594 = LINE('',#22595,#22596); +#22595 = CARTESIAN_POINT('',(1.07,0.175,0.22)); +#22596 = VECTOR('',#22597,1.); +#22597 = DIRECTION('',(0.,0.,1.)); +#22598 = PCURVE('',#22246,#22599); +#22599 = DEFINITIONAL_REPRESENTATION('',(#22600),#22604); +#22600 = LINE('',#22601,#22602); +#22601 = CARTESIAN_POINT('',(-0.101676343068,-5.6915820649E-02)); +#22602 = VECTOR('',#22603,1.); +#22603 = DIRECTION('',(1.,0.)); +#22604 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22605 = PCURVE('',#22606,#22611); +#22606 = PLANE('',#22607); +#22607 = AXIS2_PLACEMENT_3D('',#22608,#22609,#22610); +#22608 = CARTESIAN_POINT('',(1.07,0.175,0.22)); +#22609 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#22610 = DIRECTION('',(0.,0.,1.)); +#22611 = DEFINITIONAL_REPRESENTATION('',(#22612),#22616); +#22612 = LINE('',#22613,#22614); +#22613 = CARTESIAN_POINT('',(0.,0.)); +#22614 = VECTOR('',#22615,1.); +#22615 = DIRECTION('',(1.,0.)); +#22616 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22617 = ORIENTED_EDGE('',*,*,#22618,.T.); +#22618 = EDGE_CURVE('',#22591,#22448,#22619,.T.); +#22619 = SURFACE_CURVE('',#22620,(#22625,#22632),.PCURVE_S1.); +#22620 = CIRCLE('',#22621,0.22); +#22621 = AXIS2_PLACEMENT_3D('',#22622,#22623,#22624); +#22622 = CARTESIAN_POINT('',(0.85,0.175,0.455)); +#22623 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#22624 = DIRECTION('',(1.,-2.22044604925E-16,-7.569702440626E-16)); +#22625 = PCURVE('',#22246,#22626); +#22626 = DEFINITIONAL_REPRESENTATION('',(#22627),#22631); +#22627 = CIRCLE('',#22628,0.22); +#22628 = AXIS2_PLACEMENT_2D('',#22629,#22630); +#22629 = CARTESIAN_POINT('',(0.133323656932,0.163084179351)); +#22630 = DIRECTION('',(-7.569702440626E-16,-1.)); +#22631 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22632 = PCURVE('',#22633,#22638); +#22633 = CYLINDRICAL_SURFACE('',#22634,0.22); +#22634 = AXIS2_PLACEMENT_3D('',#22635,#22636,#22637); +#22635 = CARTESIAN_POINT('',(0.85,0.175,0.455)); +#22636 = DIRECTION('',(2.22044604925E-16,1.,-0.)); +#22637 = DIRECTION('',(1.,-2.22044604925E-16,-7.569702440626E-16)); +#22638 = DEFINITIONAL_REPRESENTATION('',(#22639),#22643); +#22639 = LINE('',#22640,#22641); +#22640 = CARTESIAN_POINT('',(6.28318530718,0.)); +#22641 = VECTOR('',#22642,1.); +#22642 = DIRECTION('',(-1.,0.)); +#22643 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22644 = ADVANCED_FACE('',(#22645),#22192,.T.); +#22645 = FACE_BOUND('',#22646,.T.); +#22646 = EDGE_LOOP('',(#22647,#22675,#22676,#22677,#22678,#22701,#22724, + #22747,#22775,#22798)); +#22647 = ORIENTED_EDGE('',*,*,#22648,.F.); +#22648 = EDGE_CURVE('',#22264,#22649,#22651,.T.); +#22649 = VERTEX_POINT('',#22650); +#22650 = CARTESIAN_POINT('',(0.85,-0.175,0.675)); +#22651 = SURFACE_CURVE('',#22652,(#22656,#22663),.PCURVE_S1.); +#22652 = LINE('',#22653,#22654); +#22653 = CARTESIAN_POINT('',(0.85,-0.175,0.498338171534)); +#22654 = VECTOR('',#22655,1.); +#22655 = DIRECTION('',(0.,0.,1.)); +#22656 = PCURVE('',#22192,#22657); +#22657 = DEFINITIONAL_REPRESENTATION('',(#22658),#22662); +#22658 = LINE('',#22659,#22660); +#22659 = CARTESIAN_POINT('',(0.176661828466,0.163084179351)); +#22660 = VECTOR('',#22661,1.); +#22661 = DIRECTION('',(1.,0.)); +#22662 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22663 = PCURVE('',#22664,#22669); +#22664 = PLANE('',#22665); +#22665 = AXIS2_PLACEMENT_3D('',#22666,#22667,#22668); +#22666 = CARTESIAN_POINT('',(0.85,0.53,0.675)); +#22667 = DIRECTION('',(-1.,0.,0.)); +#22668 = DIRECTION('',(0.,-1.,0.)); +#22669 = DEFINITIONAL_REPRESENTATION('',(#22670),#22674); +#22670 = LINE('',#22671,#22672); +#22671 = CARTESIAN_POINT('',(0.705,-0.176661828466)); +#22672 = VECTOR('',#22673,1.); +#22673 = DIRECTION('',(0.,1.)); +#22674 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22675 = ORIENTED_EDGE('',*,*,#22313,.T.); +#22676 = ORIENTED_EDGE('',*,*,#22176,.T.); +#22677 = ORIENTED_EDGE('',*,*,#22421,.T.); +#22678 = ORIENTED_EDGE('',*,*,#22679,.T.); +#22679 = EDGE_CURVE('',#22394,#22680,#22682,.T.); +#22680 = VERTEX_POINT('',#22681); +#22681 = CARTESIAN_POINT('',(1.25,-0.175,0.)); +#22682 = SURFACE_CURVE('',#22683,(#22687,#22694),.PCURVE_S1.); +#22683 = LINE('',#22684,#22685); +#22684 = CARTESIAN_POINT('',(1.14,-0.175,0.)); +#22685 = VECTOR('',#22686,1.); +#22686 = DIRECTION('',(1.,-2.22044604925E-16,0.)); +#22687 = PCURVE('',#22192,#22688); +#22688 = DEFINITIONAL_REPRESENTATION('',(#22689),#22693); +#22689 = LINE('',#22690,#22691); +#22690 = CARTESIAN_POINT('',(-0.321676343068,-0.126915820649)); +#22691 = VECTOR('',#22692,1.); +#22692 = DIRECTION('',(0.,-1.)); +#22693 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22694 = PCURVE('',#22409,#22695); +#22695 = DEFINITIONAL_REPRESENTATION('',(#22696),#22700); +#22696 = LINE('',#22697,#22698); +#22697 = CARTESIAN_POINT('',(7.771561172375E-17,-0.35)); +#22698 = VECTOR('',#22699,1.); +#22699 = DIRECTION('',(1.,0.)); +#22700 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22701 = ORIENTED_EDGE('',*,*,#22702,.T.); +#22702 = EDGE_CURVE('',#22680,#22703,#22705,.T.); +#22703 = VERTEX_POINT('',#22704); +#22704 = CARTESIAN_POINT('',(1.25,-0.175,0.15)); +#22705 = SURFACE_CURVE('',#22706,(#22710,#22717),.PCURVE_S1.); +#22706 = LINE('',#22707,#22708); +#22707 = CARTESIAN_POINT('',(1.25,-0.175,0.)); +#22708 = VECTOR('',#22709,1.); +#22709 = DIRECTION('',(0.,0.,1.)); +#22710 = PCURVE('',#22192,#22711); +#22711 = DEFINITIONAL_REPRESENTATION('',(#22712),#22716); +#22712 = LINE('',#22713,#22714); +#22713 = CARTESIAN_POINT('',(-0.321676343068,-0.236915820649)); +#22714 = VECTOR('',#22715,1.); +#22715 = DIRECTION('',(1.,0.)); +#22716 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22717 = PCURVE('',#22517,#22718); +#22718 = DEFINITIONAL_REPRESENTATION('',(#22719),#22723); +#22719 = LINE('',#22720,#22721); +#22720 = CARTESIAN_POINT('',(0.,-0.35)); +#22721 = VECTOR('',#22722,1.); +#22722 = DIRECTION('',(1.,0.)); +#22723 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22724 = ORIENTED_EDGE('',*,*,#22725,.T.); +#22725 = EDGE_CURVE('',#22703,#22726,#22728,.T.); +#22726 = VERTEX_POINT('',#22727); +#22727 = CARTESIAN_POINT('',(1.14,-0.175,0.15)); +#22728 = SURFACE_CURVE('',#22729,(#22733,#22740),.PCURVE_S1.); +#22729 = LINE('',#22730,#22731); +#22730 = CARTESIAN_POINT('',(1.25,-0.175,0.15)); +#22731 = VECTOR('',#22732,1.); +#22732 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#22733 = PCURVE('',#22192,#22734); +#22734 = DEFINITIONAL_REPRESENTATION('',(#22735),#22739); +#22735 = LINE('',#22736,#22737); +#22736 = CARTESIAN_POINT('',(-0.171676343068,-0.236915820649)); +#22737 = VECTOR('',#22738,1.); +#22738 = DIRECTION('',(0.,1.)); +#22739 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22740 = PCURVE('',#22545,#22741); +#22741 = DEFINITIONAL_REPRESENTATION('',(#22742),#22746); +#22742 = LINE('',#22743,#22744); +#22743 = CARTESIAN_POINT('',(-7.771561172375E-17,-0.35)); +#22744 = VECTOR('',#22745,1.); +#22745 = DIRECTION('',(1.,0.)); +#22746 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22747 = ORIENTED_EDGE('',*,*,#22748,.T.); +#22748 = EDGE_CURVE('',#22726,#22749,#22751,.T.); +#22749 = VERTEX_POINT('',#22750); +#22750 = CARTESIAN_POINT('',(1.07,-0.175,0.22)); +#22751 = SURFACE_CURVE('',#22752,(#22757,#22768),.PCURVE_S1.); +#22752 = CIRCLE('',#22753,7.E-02); +#22753 = AXIS2_PLACEMENT_3D('',#22754,#22755,#22756); +#22754 = CARTESIAN_POINT('',(1.14,-0.175,0.22)); +#22755 = DIRECTION('',(2.22044604925E-16,1.,0.)); +#22756 = DIRECTION('',(-1.586032892322E-15,3.521700469737E-31,-1.)); +#22757 = PCURVE('',#22192,#22758); +#22758 = DEFINITIONAL_REPRESENTATION('',(#22759),#22767); +#22759 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#22760,#22761,#22762,#22763 + ,#22764,#22765,#22766),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#22760 = CARTESIAN_POINT('',(-0.171676343068,-0.126915820649)); +#22761 = CARTESIAN_POINT('',(-0.171676343068,-5.672264119178E-03)); +#22762 = CARTESIAN_POINT('',(-6.6676343068E-02,-6.629404238409E-02)); +#22763 = CARTESIAN_POINT('',(3.8323656932E-02,-0.126915820649)); +#22764 = CARTESIAN_POINT('',(-6.6676343068E-02,-0.187537598914)); +#22765 = CARTESIAN_POINT('',(-0.171676343068,-0.248159377179)); +#22766 = CARTESIAN_POINT('',(-0.171676343068,-0.126915820649)); +#22767 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22768 = PCURVE('',#22578,#22769); +#22769 = DEFINITIONAL_REPRESENTATION('',(#22770),#22774); +#22770 = LINE('',#22771,#22772); +#22771 = CARTESIAN_POINT('',(0.,-0.35)); +#22772 = VECTOR('',#22773,1.); +#22773 = DIRECTION('',(1.,0.)); +#22774 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22775 = ORIENTED_EDGE('',*,*,#22776,.T.); +#22776 = EDGE_CURVE('',#22749,#22777,#22779,.T.); +#22777 = VERTEX_POINT('',#22778); +#22778 = CARTESIAN_POINT('',(1.07,-0.175,0.455)); +#22779 = SURFACE_CURVE('',#22780,(#22784,#22791),.PCURVE_S1.); +#22780 = LINE('',#22781,#22782); +#22781 = CARTESIAN_POINT('',(1.07,-0.175,0.22)); +#22782 = VECTOR('',#22783,1.); +#22783 = DIRECTION('',(0.,0.,1.)); +#22784 = PCURVE('',#22192,#22785); +#22785 = DEFINITIONAL_REPRESENTATION('',(#22786),#22790); +#22786 = LINE('',#22787,#22788); +#22787 = CARTESIAN_POINT('',(-0.101676343068,-5.6915820649E-02)); +#22788 = VECTOR('',#22789,1.); +#22789 = DIRECTION('',(1.,0.)); +#22790 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22791 = PCURVE('',#22606,#22792); +#22792 = DEFINITIONAL_REPRESENTATION('',(#22793),#22797); +#22793 = LINE('',#22794,#22795); +#22794 = CARTESIAN_POINT('',(0.,-0.35)); +#22795 = VECTOR('',#22796,1.); +#22796 = DIRECTION('',(1.,0.)); +#22797 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22798 = ORIENTED_EDGE('',*,*,#22799,.T.); +#22799 = EDGE_CURVE('',#22777,#22649,#22800,.T.); +#22800 = SURFACE_CURVE('',#22801,(#22806,#22813),.PCURVE_S1.); +#22801 = CIRCLE('',#22802,0.22); +#22802 = AXIS2_PLACEMENT_3D('',#22803,#22804,#22805); +#22803 = CARTESIAN_POINT('',(0.85,-0.175,0.455)); +#22804 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#22805 = DIRECTION('',(1.,-2.22044604925E-16,-7.569702440626E-16)); +#22806 = PCURVE('',#22192,#22807); +#22807 = DEFINITIONAL_REPRESENTATION('',(#22808),#22812); +#22808 = CIRCLE('',#22809,0.22); +#22809 = AXIS2_PLACEMENT_2D('',#22810,#22811); +#22810 = CARTESIAN_POINT('',(0.133323656932,0.163084179351)); +#22811 = DIRECTION('',(-7.569702440626E-16,-1.)); +#22812 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22813 = PCURVE('',#22633,#22814); +#22814 = DEFINITIONAL_REPRESENTATION('',(#22815),#22819); +#22815 = LINE('',#22816,#22817); +#22816 = CARTESIAN_POINT('',(6.28318530718,-0.35)); +#22817 = VECTOR('',#22818,1.); +#22818 = DIRECTION('',(-1.,0.)); +#22819 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22820 = ADVANCED_FACE('',(#22821),#22301,.F.); +#22821 = FACE_BOUND('',#22822,.F.); +#22822 = EDGE_LOOP('',(#22823,#22852,#22879,#22900,#22901,#22924)); +#22823 = ORIENTED_EDGE('',*,*,#22824,.T.); +#22824 = EDGE_CURVE('',#22825,#22827,#22829,.T.); +#22825 = VERTEX_POINT('',#22826); +#22826 = CARTESIAN_POINT('',(0.790270145251,0.500135072626,0.1)); +#22827 = VERTEX_POINT('',#22828); +#22828 = CARTESIAN_POINT('',(0.790270145251,-0.500135072626,0.1)); +#22829 = SURFACE_CURVE('',#22830,(#22834,#22840),.PCURVE_S1.); +#22830 = LINE('',#22831,#22832); +#22831 = CARTESIAN_POINT('',(0.790270145251,0.500135072626,0.1)); +#22832 = VECTOR('',#22833,1.); +#22833 = DIRECTION('',(0.,-1.,0.)); +#22834 = PCURVE('',#22301,#22835); +#22835 = DEFINITIONAL_REPRESENTATION('',(#22836),#22839); +#22836 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#22837,#22838),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.000270145252),.PIECEWISE_BEZIER_KNOTS.); +#22837 = CARTESIAN_POINT('',(-1.109673124001E-16,7.633291906977E-17)); +#22838 = CARTESIAN_POINT('',(1.06,2.753044497024E-17)); +#22839 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22840 = PCURVE('',#22841,#22846); +#22841 = PLANE('',#22842); +#22842 = AXIS2_PLACEMENT_3D('',#22843,#22844,#22845); +#22843 = CARTESIAN_POINT('',(-0.790270145251,-0.500135072626,0.1)); +#22844 = DIRECTION('',(0.,0.,1.)); +#22845 = DIRECTION('',(0.844997546083,0.534770181587,-0.)); +#22846 = DEFINITIONAL_REPRESENTATION('',(#22847),#22851); +#22847 = LINE('',#22848,#22849); +#22848 = CARTESIAN_POINT('',(1.870467314171,7.01882996168E-13)); +#22849 = VECTOR('',#22850,1.); +#22850 = DIRECTION('',(-0.534770181587,-0.844997546083)); +#22851 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22852 = ORIENTED_EDGE('',*,*,#22853,.T.); +#22853 = EDGE_CURVE('',#22827,#22854,#22856,.T.); +#22854 = VERTEX_POINT('',#22855); +#22855 = CARTESIAN_POINT('',(0.85,-0.53,0.525)); +#22856 = SURFACE_CURVE('',#22857,(#22860,#22867),.PCURVE_S1.); +#22857 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#22858,#22859),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#22858 = CARTESIAN_POINT('',(0.790270145251,-0.500135072626,0.1)); +#22859 = CARTESIAN_POINT('',(0.85,-0.53,0.525)); +#22860 = PCURVE('',#22301,#22861); +#22861 = DEFINITIONAL_REPRESENTATION('',(#22862),#22866); +#22862 = LINE('',#22863,#22864); +#22863 = CARTESIAN_POINT('',(1.06,9.157273591569E-17)); +#22864 = VECTOR('',#22865,1.); +#22865 = DIRECTION('',(-2.22044604925E-16,1.)); +#22866 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22867 = PCURVE('',#22868,#22873); +#22868 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#22869,#22870) + ,(#22871,#22872 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#22869 = CARTESIAN_POINT('',(0.790270145251,-0.500135072626,0.1)); +#22870 = CARTESIAN_POINT('',(0.85,-0.53,0.525)); +#22871 = CARTESIAN_POINT('',(0.725135072626,-0.565270145251,0.1)); +#22872 = CARTESIAN_POINT('',(0.755,-0.625,0.525)); +#22873 = DEFINITIONAL_REPRESENTATION('',(#22874),#22878); +#22874 = LINE('',#22875,#22876); +#22875 = CARTESIAN_POINT('',(8.990043132857E-18,1.009992494945E-16)); +#22876 = VECTOR('',#22877,1.); +#22877 = DIRECTION('',(1.039327883682E-17,1.)); +#22878 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22879 = ORIENTED_EDGE('',*,*,#22880,.F.); +#22880 = EDGE_CURVE('',#22264,#22854,#22881,.T.); +#22881 = SURFACE_CURVE('',#22882,(#22886,#22893),.PCURVE_S1.); +#22882 = LINE('',#22883,#22884); +#22883 = CARTESIAN_POINT('',(0.85,0.53,0.525)); +#22884 = VECTOR('',#22885,1.); +#22885 = DIRECTION('',(0.,-1.,0.)); +#22886 = PCURVE('',#22301,#22887); +#22887 = DEFINITIONAL_REPRESENTATION('',(#22888),#22892); +#22888 = LINE('',#22889,#22890); +#22889 = CARTESIAN_POINT('',(0.,1.)); +#22890 = VECTOR('',#22891,1.); +#22891 = DIRECTION('',(1.,9.382166405283E-16)); +#22892 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22893 = PCURVE('',#22664,#22894); +#22894 = DEFINITIONAL_REPRESENTATION('',(#22895),#22899); +#22895 = LINE('',#22896,#22897); +#22896 = CARTESIAN_POINT('',(0.,-0.15)); +#22897 = VECTOR('',#22898,1.); +#22898 = DIRECTION('',(1.,0.)); +#22899 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22900 = ORIENTED_EDGE('',*,*,#22261,.F.); +#22901 = ORIENTED_EDGE('',*,*,#22902,.F.); +#22902 = EDGE_CURVE('',#22903,#22262,#22905,.T.); +#22903 = VERTEX_POINT('',#22904); +#22904 = CARTESIAN_POINT('',(0.85,0.53,0.525)); +#22905 = SURFACE_CURVE('',#22906,(#22910,#22917),.PCURVE_S1.); +#22906 = LINE('',#22907,#22908); +#22907 = CARTESIAN_POINT('',(0.85,0.53,0.525)); +#22908 = VECTOR('',#22909,1.); +#22909 = DIRECTION('',(0.,-1.,0.)); +#22910 = PCURVE('',#22301,#22911); +#22911 = DEFINITIONAL_REPRESENTATION('',(#22912),#22916); +#22912 = LINE('',#22913,#22914); +#22913 = CARTESIAN_POINT('',(-2.525705101036E-17,1.)); +#22914 = VECTOR('',#22915,1.); +#22915 = DIRECTION('',(1.,9.382166405283E-16)); +#22916 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22917 = PCURVE('',#22463,#22918); +#22918 = DEFINITIONAL_REPRESENTATION('',(#22919),#22923); +#22919 = LINE('',#22920,#22921); +#22920 = CARTESIAN_POINT('',(0.,-0.15)); +#22921 = VECTOR('',#22922,1.); +#22922 = DIRECTION('',(1.,0.)); +#22923 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22924 = ORIENTED_EDGE('',*,*,#22925,.F.); +#22925 = EDGE_CURVE('',#22825,#22903,#22926,.T.); +#22926 = SURFACE_CURVE('',#22927,(#22930,#22937),.PCURVE_S1.); +#22927 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#22928,#22929),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#22928 = CARTESIAN_POINT('',(0.790270145251,0.500135072626,0.1)); +#22929 = CARTESIAN_POINT('',(0.85,0.53,0.525)); +#22930 = PCURVE('',#22301,#22931); +#22931 = DEFINITIONAL_REPRESENTATION('',(#22932),#22936); +#22932 = LINE('',#22933,#22934); +#22933 = CARTESIAN_POINT('',(-1.109673124001E-16,7.633291906977E-17)); +#22934 = VECTOR('',#22935,1.); +#22935 = DIRECTION('',(9.336073486156E-17,1.)); +#22936 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22937 = PCURVE('',#22938,#22943); +#22938 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#22939,#22940) + ,(#22941,#22942 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#22939 = CARTESIAN_POINT('',(0.725135072626,0.565270145251,0.1)); +#22940 = CARTESIAN_POINT('',(0.755,0.625,0.525)); +#22941 = CARTESIAN_POINT('',(0.790270145251,0.500135072626,0.1)); +#22942 = CARTESIAN_POINT('',(0.85,0.53,0.525)); +#22943 = DEFINITIONAL_REPRESENTATION('',(#22944),#22948); +#22944 = LINE('',#22945,#22946); +#22945 = CARTESIAN_POINT('',(0.134350288425,7.857456237696E-17)); +#22946 = VECTOR('',#22947,1.); +#22947 = DIRECTION('',(-5.551115123126E-17,1.)); +#22948 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22949 = ADVANCED_FACE('',(#22950),#22409,.F.); +#22950 = FACE_BOUND('',#22951,.F.); +#22951 = EDGE_LOOP('',(#22952,#22953,#22954,#22975)); +#22952 = ORIENTED_EDGE('',*,*,#22393,.T.); +#22953 = ORIENTED_EDGE('',*,*,#22679,.T.); +#22954 = ORIENTED_EDGE('',*,*,#22955,.F.); +#22955 = EDGE_CURVE('',#22479,#22680,#22956,.T.); +#22956 = SURFACE_CURVE('',#22957,(#22961,#22968),.PCURVE_S1.); +#22957 = LINE('',#22958,#22959); +#22958 = CARTESIAN_POINT('',(1.25,0.175,0.)); +#22959 = VECTOR('',#22960,1.); +#22960 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#22961 = PCURVE('',#22409,#22962); +#22962 = DEFINITIONAL_REPRESENTATION('',(#22963),#22967); +#22963 = LINE('',#22964,#22965); +#22964 = CARTESIAN_POINT('',(0.11,2.442490654175E-17)); +#22965 = VECTOR('',#22966,1.); +#22966 = DIRECTION('',(0.,-1.)); +#22967 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22968 = PCURVE('',#22517,#22969); +#22969 = DEFINITIONAL_REPRESENTATION('',(#22970),#22974); +#22970 = LINE('',#22971,#22972); +#22971 = CARTESIAN_POINT('',(0.,0.)); +#22972 = VECTOR('',#22973,1.); +#22973 = DIRECTION('',(0.,-1.)); +#22974 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22975 = ORIENTED_EDGE('',*,*,#22478,.F.); +#22976 = ADVANCED_FACE('',(#22977),#22463,.F.); +#22977 = FACE_BOUND('',#22978,.F.); +#22978 = EDGE_LOOP('',(#22979,#23004,#23005,#23006)); +#22979 = ORIENTED_EDGE('',*,*,#22980,.F.); +#22980 = EDGE_CURVE('',#22903,#22981,#22983,.T.); +#22981 = VERTEX_POINT('',#22982); +#22982 = CARTESIAN_POINT('',(0.85,0.53,0.675)); +#22983 = SURFACE_CURVE('',#22984,(#22987,#22993),.PCURVE_S1.); +#22984 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#22985,#22986),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#22985 = CARTESIAN_POINT('',(0.85,0.53,0.525)); +#22986 = CARTESIAN_POINT('',(0.85,0.53,0.675)); +#22987 = PCURVE('',#22463,#22988); +#22988 = DEFINITIONAL_REPRESENTATION('',(#22989),#22992); +#22989 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#22990,#22991),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#22990 = CARTESIAN_POINT('',(0.,-0.15)); +#22991 = CARTESIAN_POINT('',(0.,0.)); +#22992 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#22993 = PCURVE('',#22994,#22999); +#22994 = PLANE('',#22995); +#22995 = AXIS2_PLACEMENT_3D('',#22996,#22997,#22998); +#22996 = CARTESIAN_POINT('',(0.755,0.625,0.675)); +#22997 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#22998 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#22999 = DEFINITIONAL_REPRESENTATION('',(#23000),#23003); +#23000 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#23001,#23002),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#23001 = CARTESIAN_POINT('',(0.134350288425,-0.15)); +#23002 = CARTESIAN_POINT('',(0.134350288425,0.)); +#23003 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23004 = ORIENTED_EDGE('',*,*,#22902,.T.); +#23005 = ORIENTED_EDGE('',*,*,#22447,.T.); +#23006 = ORIENTED_EDGE('',*,*,#23007,.F.); +#23007 = EDGE_CURVE('',#22981,#22448,#23008,.T.); +#23008 = SURFACE_CURVE('',#23009,(#23013,#23020),.PCURVE_S1.); +#23009 = LINE('',#23010,#23011); +#23010 = CARTESIAN_POINT('',(0.85,0.53,0.675)); +#23011 = VECTOR('',#23012,1.); +#23012 = DIRECTION('',(0.,-1.,0.)); +#23013 = PCURVE('',#22463,#23014); +#23014 = DEFINITIONAL_REPRESENTATION('',(#23015),#23019); +#23015 = LINE('',#23016,#23017); +#23016 = CARTESIAN_POINT('',(0.,0.)); +#23017 = VECTOR('',#23018,1.); +#23018 = DIRECTION('',(1.,0.)); +#23019 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23020 = PCURVE('',#23021,#23026); +#23021 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#23022,#23023) + ,(#23024,#23025 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.06),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#23022 = CARTESIAN_POINT('',(0.85,0.53,0.675)); +#23023 = CARTESIAN_POINT('',(0.825,0.5175,0.675)); +#23024 = CARTESIAN_POINT('',(0.85,-0.53,0.675)); +#23025 = CARTESIAN_POINT('',(0.825,-0.5175,0.675)); +#23026 = DEFINITIONAL_REPRESENTATION('',(#23027),#23031); +#23027 = LINE('',#23028,#23029); +#23028 = CARTESIAN_POINT('',(1.09742368264E-16,-2.75654855404E-16)); +#23029 = VECTOR('',#23030,1.); +#23030 = DIRECTION('',(1.,-1.397886106116E-14)); +#23031 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23032 = ADVANCED_FACE('',(#23033),#22633,.T.); +#23033 = FACE_BOUND('',#23034,.T.); +#23034 = EDGE_LOOP('',(#23035,#23036,#23062,#23063)); +#23035 = ORIENTED_EDGE('',*,*,#22618,.T.); +#23036 = ORIENTED_EDGE('',*,*,#23037,.T.); +#23037 = EDGE_CURVE('',#22448,#22649,#23038,.T.); +#23038 = SURFACE_CURVE('',#23039,(#23043,#23050),.PCURVE_S1.); +#23039 = LINE('',#23040,#23041); +#23040 = CARTESIAN_POINT('',(0.85,0.175,0.675)); +#23041 = VECTOR('',#23042,1.); +#23042 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#23043 = PCURVE('',#22633,#23044); +#23044 = DEFINITIONAL_REPRESENTATION('',(#23045),#23049); +#23045 = LINE('',#23046,#23047); +#23046 = CARTESIAN_POINT('',(4.712388980385,0.)); +#23047 = VECTOR('',#23048,1.); +#23048 = DIRECTION('',(-2.537652627715E-15,-1.)); +#23049 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23050 = PCURVE('',#23051,#23056); +#23051 = PLANE('',#23052); +#23052 = AXIS2_PLACEMENT_3D('',#23053,#23054,#23055); +#23053 = CARTESIAN_POINT('',(0.85,0.175,0.675)); +#23054 = DIRECTION('',(0.,-0.,-1.)); +#23055 = DIRECTION('',(-1.,2.22044604925E-16,-0.)); +#23056 = DEFINITIONAL_REPRESENTATION('',(#23057),#23061); +#23057 = LINE('',#23058,#23059); +#23058 = CARTESIAN_POINT('',(0.,0.)); +#23059 = VECTOR('',#23060,1.); +#23060 = DIRECTION('',(0.,-1.)); +#23061 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23062 = ORIENTED_EDGE('',*,*,#22799,.F.); +#23063 = ORIENTED_EDGE('',*,*,#23064,.F.); +#23064 = EDGE_CURVE('',#22591,#22777,#23065,.T.); +#23065 = SURFACE_CURVE('',#23066,(#23070,#23077),.PCURVE_S1.); +#23066 = LINE('',#23067,#23068); +#23067 = CARTESIAN_POINT('',(1.07,0.175,0.455)); +#23068 = VECTOR('',#23069,1.); +#23069 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#23070 = PCURVE('',#22633,#23071); +#23071 = DEFINITIONAL_REPRESENTATION('',(#23072),#23076); +#23072 = LINE('',#23073,#23074); +#23073 = CARTESIAN_POINT('',(6.28318530718,5.551115123126E-17)); +#23074 = VECTOR('',#23075,1.); +#23075 = DIRECTION('',(0.,-1.)); +#23076 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23077 = PCURVE('',#22606,#23078); +#23078 = DEFINITIONAL_REPRESENTATION('',(#23079),#23083); +#23079 = LINE('',#23080,#23081); +#23080 = CARTESIAN_POINT('',(0.235,0.)); +#23081 = VECTOR('',#23082,1.); +#23082 = DIRECTION('',(0.,-1.)); +#23083 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23084 = ADVANCED_FACE('',(#23085),#22606,.F.); +#23085 = FACE_BOUND('',#23086,.F.); +#23086 = EDGE_LOOP('',(#23087,#23108,#23109,#23110)); +#23087 = ORIENTED_EDGE('',*,*,#23088,.T.); +#23088 = EDGE_CURVE('',#22558,#22749,#23089,.T.); +#23089 = SURFACE_CURVE('',#23090,(#23094,#23101),.PCURVE_S1.); +#23090 = LINE('',#23091,#23092); +#23091 = CARTESIAN_POINT('',(1.07,0.175,0.22)); +#23092 = VECTOR('',#23093,1.); +#23093 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#23094 = PCURVE('',#22606,#23095); +#23095 = DEFINITIONAL_REPRESENTATION('',(#23096),#23100); +#23096 = LINE('',#23097,#23098); +#23097 = CARTESIAN_POINT('',(0.,0.)); +#23098 = VECTOR('',#23099,1.); +#23099 = DIRECTION('',(0.,-1.)); +#23100 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23101 = PCURVE('',#22578,#23102); +#23102 = DEFINITIONAL_REPRESENTATION('',(#23103),#23107); +#23103 = LINE('',#23104,#23105); +#23104 = CARTESIAN_POINT('',(1.570796326795,0.)); +#23105 = VECTOR('',#23106,1.); +#23106 = DIRECTION('',(0.,-1.)); +#23107 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23108 = ORIENTED_EDGE('',*,*,#22776,.T.); +#23109 = ORIENTED_EDGE('',*,*,#23064,.F.); +#23110 = ORIENTED_EDGE('',*,*,#22590,.F.); +#23111 = ADVANCED_FACE('',(#23112),#22578,.F.); +#23112 = FACE_BOUND('',#23113,.F.); +#23113 = EDGE_LOOP('',(#23114,#23135,#23136,#23137)); +#23114 = ORIENTED_EDGE('',*,*,#23115,.T.); +#23115 = EDGE_CURVE('',#22530,#22726,#23116,.T.); +#23116 = SURFACE_CURVE('',#23117,(#23121,#23128),.PCURVE_S1.); +#23117 = LINE('',#23118,#23119); +#23118 = CARTESIAN_POINT('',(1.14,0.175,0.15)); +#23119 = VECTOR('',#23120,1.); +#23120 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#23121 = PCURVE('',#22578,#23122); +#23122 = DEFINITIONAL_REPRESENTATION('',(#23123),#23127); +#23123 = LINE('',#23124,#23125); +#23124 = CARTESIAN_POINT('',(0.,0.)); +#23125 = VECTOR('',#23126,1.); +#23126 = DIRECTION('',(0.,-1.)); +#23127 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23128 = PCURVE('',#22545,#23129); +#23129 = DEFINITIONAL_REPRESENTATION('',(#23130),#23134); +#23130 = LINE('',#23131,#23132); +#23131 = CARTESIAN_POINT('',(0.11,-2.442490654175E-17)); +#23132 = VECTOR('',#23133,1.); +#23133 = DIRECTION('',(0.,-1.)); +#23134 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23135 = ORIENTED_EDGE('',*,*,#22748,.T.); +#23136 = ORIENTED_EDGE('',*,*,#23088,.F.); +#23137 = ORIENTED_EDGE('',*,*,#22557,.F.); +#23138 = ADVANCED_FACE('',(#23139),#22545,.F.); +#23139 = FACE_BOUND('',#23140,.F.); +#23140 = EDGE_LOOP('',(#23141,#23162,#23163,#23164)); +#23141 = ORIENTED_EDGE('',*,*,#23142,.T.); +#23142 = EDGE_CURVE('',#22502,#22703,#23143,.T.); +#23143 = SURFACE_CURVE('',#23144,(#23148,#23155),.PCURVE_S1.); +#23144 = LINE('',#23145,#23146); +#23145 = CARTESIAN_POINT('',(1.25,0.175,0.15)); +#23146 = VECTOR('',#23147,1.); +#23147 = DIRECTION('',(-2.22044604925E-16,-1.,0.)); +#23148 = PCURVE('',#22545,#23149); +#23149 = DEFINITIONAL_REPRESENTATION('',(#23150),#23154); +#23150 = LINE('',#23151,#23152); +#23151 = CARTESIAN_POINT('',(0.,0.)); +#23152 = VECTOR('',#23153,1.); +#23153 = DIRECTION('',(0.,-1.)); +#23154 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23155 = PCURVE('',#22517,#23156); +#23156 = DEFINITIONAL_REPRESENTATION('',(#23157),#23161); +#23157 = LINE('',#23158,#23159); +#23158 = CARTESIAN_POINT('',(0.15,0.)); +#23159 = VECTOR('',#23160,1.); +#23160 = DIRECTION('',(0.,-1.)); +#23161 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23162 = ORIENTED_EDGE('',*,*,#22725,.T.); +#23163 = ORIENTED_EDGE('',*,*,#23115,.F.); +#23164 = ORIENTED_EDGE('',*,*,#22529,.F.); +#23165 = ADVANCED_FACE('',(#23166),#22517,.F.); +#23166 = FACE_BOUND('',#23167,.F.); +#23167 = EDGE_LOOP('',(#23168,#23169,#23170,#23171)); +#23168 = ORIENTED_EDGE('',*,*,#22955,.T.); +#23169 = ORIENTED_EDGE('',*,*,#22702,.T.); +#23170 = ORIENTED_EDGE('',*,*,#23142,.F.); +#23171 = ORIENTED_EDGE('',*,*,#22501,.F.); +#23172 = ADVANCED_FACE('',(#23173),#22664,.F.); +#23173 = FACE_BOUND('',#23174,.F.); +#23174 = EDGE_LOOP('',(#23175,#23176,#23177,#23202)); +#23175 = ORIENTED_EDGE('',*,*,#22648,.F.); +#23176 = ORIENTED_EDGE('',*,*,#22880,.T.); +#23177 = ORIENTED_EDGE('',*,*,#23178,.T.); +#23178 = EDGE_CURVE('',#22854,#23179,#23181,.T.); +#23179 = VERTEX_POINT('',#23180); +#23180 = CARTESIAN_POINT('',(0.85,-0.53,0.675)); +#23181 = SURFACE_CURVE('',#23182,(#23185,#23191),.PCURVE_S1.); +#23182 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#23183,#23184),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#23183 = CARTESIAN_POINT('',(0.85,-0.53,0.525)); +#23184 = CARTESIAN_POINT('',(0.85,-0.53,0.675)); +#23185 = PCURVE('',#22664,#23186); +#23186 = DEFINITIONAL_REPRESENTATION('',(#23187),#23190); +#23187 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#23188,#23189),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#23188 = CARTESIAN_POINT('',(1.06,-0.15)); +#23189 = CARTESIAN_POINT('',(1.06,0.)); +#23190 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23191 = PCURVE('',#23192,#23197); +#23192 = PLANE('',#23193); +#23193 = AXIS2_PLACEMENT_3D('',#23194,#23195,#23196); +#23194 = CARTESIAN_POINT('',(0.85,-0.53,0.675)); +#23195 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#23196 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#23197 = DEFINITIONAL_REPRESENTATION('',(#23198),#23201); +#23198 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#23199,#23200),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#23199 = CARTESIAN_POINT('',(0.,-0.15)); +#23200 = CARTESIAN_POINT('',(0.,0.)); +#23201 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23202 = ORIENTED_EDGE('',*,*,#23203,.F.); +#23203 = EDGE_CURVE('',#22649,#23179,#23204,.T.); +#23204 = SURFACE_CURVE('',#23205,(#23209,#23216),.PCURVE_S1.); +#23205 = LINE('',#23206,#23207); +#23206 = CARTESIAN_POINT('',(0.85,0.53,0.675)); +#23207 = VECTOR('',#23208,1.); +#23208 = DIRECTION('',(0.,-1.,0.)); +#23209 = PCURVE('',#22664,#23210); +#23210 = DEFINITIONAL_REPRESENTATION('',(#23211),#23215); +#23211 = LINE('',#23212,#23213); +#23212 = CARTESIAN_POINT('',(0.,0.)); +#23213 = VECTOR('',#23214,1.); +#23214 = DIRECTION('',(1.,0.)); +#23215 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23216 = PCURVE('',#23217,#23222); +#23217 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#23218,#23219) + ,(#23220,#23221 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.06),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#23218 = CARTESIAN_POINT('',(0.85,0.53,0.675)); +#23219 = CARTESIAN_POINT('',(0.825,0.5175,0.675)); +#23220 = CARTESIAN_POINT('',(0.85,-0.53,0.675)); +#23221 = CARTESIAN_POINT('',(0.825,-0.5175,0.675)); +#23222 = DEFINITIONAL_REPRESENTATION('',(#23223),#23227); +#23223 = LINE('',#23224,#23225); +#23224 = CARTESIAN_POINT('',(0.,-6.496560674117E-17)); +#23225 = VECTOR('',#23226,1.); +#23226 = DIRECTION('',(1.,-1.03871327614E-15)); +#23227 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23228 = ADVANCED_FACE('',(#23229),#22841,.F.); +#23229 = FACE_BOUND('',#23230,.F.); +#23230 = EDGE_LOOP('',(#23231,#23260,#23287,#23307,#23308,#23330,#23357, + #23384)); +#23231 = ORIENTED_EDGE('',*,*,#23232,.F.); +#23232 = EDGE_CURVE('',#23233,#23235,#23237,.T.); +#23233 = VERTEX_POINT('',#23234); +#23234 = CARTESIAN_POINT('',(-0.725135072626,-0.565270145251,0.1)); +#23235 = VERTEX_POINT('',#23236); +#23236 = CARTESIAN_POINT('',(-0.790270145251,-0.500135072626,0.1)); +#23237 = SURFACE_CURVE('',#23238,(#23242,#23249),.PCURVE_S1.); +#23238 = LINE('',#23239,#23240); +#23239 = CARTESIAN_POINT('',(-0.725135072626,-0.565270145251,0.1)); +#23240 = VECTOR('',#23241,1.); +#23241 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#23242 = PCURVE('',#22841,#23243); +#23243 = DEFINITIONAL_REPRESENTATION('',(#23244),#23248); +#23244 = LINE('',#23245,#23246); +#23245 = CARTESIAN_POINT('',(2.02066819167E-02,-8.987127114738E-02)); +#23246 = VECTOR('',#23247,1.); +#23247 = DIRECTION('',(-0.219363873145,0.975643116697)); +#23248 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23249 = PCURVE('',#23250,#23255); +#23250 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#23251,#23252) + ,(#23253,#23254 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#23251 = CARTESIAN_POINT('',(-0.725135072626,-0.565270145251,0.1)); +#23252 = CARTESIAN_POINT('',(-0.755,-0.625,0.525)); +#23253 = CARTESIAN_POINT('',(-0.790270145251,-0.500135072626,0.1)); +#23254 = CARTESIAN_POINT('',(-0.85,-0.53,0.525)); +#23255 = DEFINITIONAL_REPRESENTATION('',(#23256),#23259); +#23256 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#23257,#23258),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,9.211490309243E-02),.PIECEWISE_BEZIER_KNOTS.); +#23257 = CARTESIAN_POINT('',(7.648479574907E-18,6.541530374399E-17)); +#23258 = CARTESIAN_POINT('',(0.134350288425,1.468695253498E-17)); +#23259 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23260 = ORIENTED_EDGE('',*,*,#23261,.F.); +#23261 = EDGE_CURVE('',#23262,#23233,#23264,.T.); +#23262 = VERTEX_POINT('',#23263); +#23263 = CARTESIAN_POINT('',(0.725135072626,-0.565270145251,0.1)); +#23264 = SURFACE_CURVE('',#23265,(#23269,#23276),.PCURVE_S1.); +#23265 = LINE('',#23266,#23267); +#23266 = CARTESIAN_POINT('',(0.725135072626,-0.565270145251,0.1)); +#23267 = VECTOR('',#23268,1.); +#23268 = DIRECTION('',(-1.,0.,0.)); +#23269 = PCURVE('',#22841,#23270); +#23270 = DEFINITIONAL_REPRESENTATION('',(#23271),#23275); +#23271 = LINE('',#23272,#23273); +#23272 = CARTESIAN_POINT('',(1.245681395812,-0.865432500074)); +#23273 = VECTOR('',#23274,1.); +#23274 = DIRECTION('',(-0.844997546083,0.534770181587)); +#23275 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23276 = PCURVE('',#23277,#23282); +#23277 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#23278,#23279) + ,(#23280,#23281 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.51),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#23278 = CARTESIAN_POINT('',(0.725135072626,-0.565270145251,0.1)); +#23279 = CARTESIAN_POINT('',(0.755,-0.625,0.525)); +#23280 = CARTESIAN_POINT('',(-0.725135072626,-0.565270145251,0.1)); +#23281 = CARTESIAN_POINT('',(-0.755,-0.625,0.525)); +#23282 = DEFINITIONAL_REPRESENTATION('',(#23283),#23286); +#23283 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#23284,#23285),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.450270145252),.PIECEWISE_BEZIER_KNOTS.); +#23284 = CARTESIAN_POINT('',(8.929711347232E-17,2.282181838816E-17)); +#23285 = CARTESIAN_POINT('',(1.51,-1.035815622169E-17)); +#23286 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23287 = ORIENTED_EDGE('',*,*,#23288,.F.); +#23288 = EDGE_CURVE('',#22827,#23262,#23289,.T.); +#23289 = SURFACE_CURVE('',#23290,(#23294,#23301),.PCURVE_S1.); +#23290 = LINE('',#23291,#23292); +#23291 = CARTESIAN_POINT('',(0.790270145251,-0.500135072626,0.1)); +#23292 = VECTOR('',#23293,1.); +#23293 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#23294 = PCURVE('',#22841,#23295); +#23295 = DEFINITIONAL_REPRESENTATION('',(#23296),#23300); +#23296 = LINE('',#23297,#23298); +#23297 = CARTESIAN_POINT('',(1.335552666959,-0.845225818157)); +#23298 = VECTOR('',#23299,1.); +#23299 = DIRECTION('',(-0.975643116697,-0.219363873145)); +#23300 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23301 = PCURVE('',#22868,#23302); +#23302 = DEFINITIONAL_REPRESENTATION('',(#23303),#23306); +#23303 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#23304,#23305),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,9.211490309243E-02),.PIECEWISE_BEZIER_KNOTS.); +#23304 = CARTESIAN_POINT('',(8.990043132857E-18,1.009992494945E-16)); +#23305 = CARTESIAN_POINT('',(0.134350288425,9.182419763316E-17)); +#23306 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23307 = ORIENTED_EDGE('',*,*,#22824,.F.); +#23308 = ORIENTED_EDGE('',*,*,#23309,.F.); +#23309 = EDGE_CURVE('',#23310,#22825,#23312,.T.); +#23310 = VERTEX_POINT('',#23311); +#23311 = CARTESIAN_POINT('',(0.725135072626,0.565270145251,0.1)); +#23312 = SURFACE_CURVE('',#23313,(#23317,#23324),.PCURVE_S1.); +#23313 = LINE('',#23314,#23315); +#23314 = CARTESIAN_POINT('',(0.725135072626,0.565270145251,0.1)); +#23315 = VECTOR('',#23316,1.); +#23316 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#23317 = PCURVE('',#22841,#23318); +#23318 = DEFINITIONAL_REPRESENTATION('',(#23319),#23323); +#23319 = LINE('',#23320,#23321); +#23320 = CARTESIAN_POINT('',(1.850260632254,8.987127114808E-02)); +#23321 = VECTOR('',#23322,1.); +#23322 = DIRECTION('',(0.219363873145,-0.975643116697)); +#23323 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23324 = PCURVE('',#22938,#23325); +#23325 = DEFINITIONAL_REPRESENTATION('',(#23326),#23329); +#23326 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#23327,#23328),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,9.211490309243E-02),.PIECEWISE_BEZIER_KNOTS.); +#23327 = CARTESIAN_POINT('',(7.648479574907E-18,6.541530374399E-17)); +#23328 = CARTESIAN_POINT('',(0.134350288425,1.468695253498E-17)); +#23329 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23330 = ORIENTED_EDGE('',*,*,#23331,.F.); +#23331 = EDGE_CURVE('',#23332,#23310,#23334,.T.); +#23332 = VERTEX_POINT('',#23333); +#23333 = CARTESIAN_POINT('',(-0.725135072626,0.565270145251,0.1)); +#23334 = SURFACE_CURVE('',#23335,(#23339,#23346),.PCURVE_S1.); +#23335 = LINE('',#23336,#23337); +#23336 = CARTESIAN_POINT('',(-0.725135072626,0.565270145251,0.1)); +#23337 = VECTOR('',#23338,1.); +#23338 = DIRECTION('',(1.,0.,0.)); +#23339 = PCURVE('',#22841,#23340); +#23340 = DEFINITIONAL_REPRESENTATION('',(#23341),#23345); +#23341 = LINE('',#23342,#23343); +#23342 = CARTESIAN_POINT('',(0.62478591836,0.865432500074)); +#23343 = VECTOR('',#23344,1.); +#23344 = DIRECTION('',(0.844997546083,-0.534770181587)); +#23345 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23346 = PCURVE('',#23347,#23352); +#23347 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#23348,#23349) + ,(#23350,#23351 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.51),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#23348 = CARTESIAN_POINT('',(-0.725135072626,0.565270145251,0.1)); +#23349 = CARTESIAN_POINT('',(-0.755,0.625,0.525)); +#23350 = CARTESIAN_POINT('',(0.725135072626,0.565270145251,0.1)); +#23351 = CARTESIAN_POINT('',(0.755,0.625,0.525)); +#23352 = DEFINITIONAL_REPRESENTATION('',(#23353),#23356); +#23353 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#23354,#23355),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.450270145252),.PIECEWISE_BEZIER_KNOTS.); +#23354 = CARTESIAN_POINT('',(8.929711347232E-17,2.282181838816E-17)); +#23355 = CARTESIAN_POINT('',(1.51,-1.035815622169E-17)); +#23356 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23357 = ORIENTED_EDGE('',*,*,#23358,.F.); +#23358 = EDGE_CURVE('',#23359,#23332,#23361,.T.); +#23359 = VERTEX_POINT('',#23360); +#23360 = CARTESIAN_POINT('',(-0.790270145251,0.500135072626,0.1)); +#23361 = SURFACE_CURVE('',#23362,(#23366,#23373),.PCURVE_S1.); +#23362 = LINE('',#23363,#23364); +#23363 = CARTESIAN_POINT('',(-0.790270145251,0.500135072626,0.1)); +#23364 = VECTOR('',#23365,1.); +#23365 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#23366 = PCURVE('',#22841,#23367); +#23367 = DEFINITIONAL_REPRESENTATION('',(#23368),#23372); +#23368 = LINE('',#23369,#23370); +#23369 = CARTESIAN_POINT('',(0.534914647212,0.845225818158)); +#23370 = VECTOR('',#23371,1.); +#23371 = DIRECTION('',(0.975643116697,0.219363873145)); +#23372 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23373 = PCURVE('',#23374,#23379); +#23374 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#23375,#23376) + ,(#23377,#23378 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#23375 = CARTESIAN_POINT('',(-0.790270145251,0.500135072626,0.1)); +#23376 = CARTESIAN_POINT('',(-0.85,0.53,0.525)); +#23377 = CARTESIAN_POINT('',(-0.725135072626,0.565270145251,0.1)); +#23378 = CARTESIAN_POINT('',(-0.755,0.625,0.525)); +#23379 = DEFINITIONAL_REPRESENTATION('',(#23380),#23383); +#23380 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#23381,#23382),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,9.211490309243E-02),.PIECEWISE_BEZIER_KNOTS.); +#23381 = CARTESIAN_POINT('',(8.990043132857E-18,1.009992494945E-16)); +#23382 = CARTESIAN_POINT('',(0.134350288425,9.182419763316E-17)); +#23383 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23384 = ORIENTED_EDGE('',*,*,#23385,.F.); +#23385 = EDGE_CURVE('',#23235,#23359,#23386,.T.); +#23386 = SURFACE_CURVE('',#23387,(#23391,#23398),.PCURVE_S1.); +#23387 = LINE('',#23388,#23389); +#23388 = CARTESIAN_POINT('',(-0.790270145251,-0.500135072626,0.1)); +#23389 = VECTOR('',#23390,1.); +#23390 = DIRECTION('',(0.,1.,0.)); +#23391 = PCURVE('',#22841,#23392); +#23392 = DEFINITIONAL_REPRESENTATION('',(#23393),#23397); +#23393 = LINE('',#23394,#23395); +#23394 = CARTESIAN_POINT('',(0.,0.)); +#23395 = VECTOR('',#23396,1.); +#23396 = DIRECTION('',(0.534770181587,0.844997546083)); +#23397 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23398 = PCURVE('',#23399,#23404); +#23399 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#23400,#23401) + ,(#23402,#23403 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.06),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#23400 = CARTESIAN_POINT('',(-0.790270145251,-0.500135072626,0.1)); +#23401 = CARTESIAN_POINT('',(-0.85,-0.53,0.525)); +#23402 = CARTESIAN_POINT('',(-0.790270145251,0.500135072626,0.1)); +#23403 = CARTESIAN_POINT('',(-0.85,0.53,0.525)); +#23404 = DEFINITIONAL_REPRESENTATION('',(#23405),#23408); +#23405 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#23406,#23407),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.000270145252),.PIECEWISE_BEZIER_KNOTS.); +#23406 = CARTESIAN_POINT('',(-1.109673124001E-16,7.633291906977E-17)); +#23407 = CARTESIAN_POINT('',(1.06,2.753044497024E-17)); +#23408 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23409 = ADVANCED_FACE('',(#23410),#22938,.F.); +#23410 = FACE_BOUND('',#23411,.F.); +#23411 = EDGE_LOOP('',(#23412,#23413,#23414,#23437)); +#23412 = ORIENTED_EDGE('',*,*,#23309,.T.); +#23413 = ORIENTED_EDGE('',*,*,#22925,.T.); +#23414 = ORIENTED_EDGE('',*,*,#23415,.F.); +#23415 = EDGE_CURVE('',#23416,#22903,#23418,.T.); +#23416 = VERTEX_POINT('',#23417); +#23417 = CARTESIAN_POINT('',(0.755,0.625,0.525)); +#23418 = SURFACE_CURVE('',#23419,(#23423,#23430),.PCURVE_S1.); +#23419 = LINE('',#23420,#23421); +#23420 = CARTESIAN_POINT('',(0.755,0.625,0.525)); +#23421 = VECTOR('',#23422,1.); +#23422 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#23423 = PCURVE('',#22938,#23424); +#23424 = DEFINITIONAL_REPRESENTATION('',(#23425),#23429); +#23425 = LINE('',#23426,#23427); +#23426 = CARTESIAN_POINT('',(2.364154532791E-17,1.)); +#23427 = VECTOR('',#23428,1.); +#23428 = DIRECTION('',(1.,-1.652728903883E-15)); +#23429 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23430 = PCURVE('',#22994,#23431); +#23431 = DEFINITIONAL_REPRESENTATION('',(#23432),#23436); +#23432 = LINE('',#23433,#23434); +#23433 = CARTESIAN_POINT('',(0.,-0.15)); +#23434 = VECTOR('',#23435,1.); +#23435 = DIRECTION('',(1.,0.)); +#23436 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23437 = ORIENTED_EDGE('',*,*,#23438,.F.); +#23438 = EDGE_CURVE('',#23310,#23416,#23439,.T.); +#23439 = SURFACE_CURVE('',#23440,(#23443,#23450),.PCURVE_S1.); +#23440 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#23441,#23442),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#23441 = CARTESIAN_POINT('',(0.725135072626,0.565270145251,0.1)); +#23442 = CARTESIAN_POINT('',(0.755,0.625,0.525)); +#23443 = PCURVE('',#22938,#23444); +#23444 = DEFINITIONAL_REPRESENTATION('',(#23445),#23449); +#23445 = LINE('',#23446,#23447); +#23446 = CARTESIAN_POINT('',(7.648479574907E-18,6.541530374399E-17)); +#23447 = VECTOR('',#23448,1.); +#23448 = DIRECTION('',(1.059643011366E-17,1.)); +#23449 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23450 = PCURVE('',#23347,#23451); +#23451 = DEFINITIONAL_REPRESENTATION('',(#23452),#23456); +#23452 = LINE('',#23453,#23454); +#23453 = CARTESIAN_POINT('',(1.51,1.768190662056E-17)); +#23454 = VECTOR('',#23455,1.); +#23455 = DIRECTION('',(2.22044604925E-16,1.)); +#23456 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23457 = ADVANCED_FACE('',(#23458),#22868,.F.); +#23458 = FACE_BOUND('',#23459,.F.); +#23459 = EDGE_LOOP('',(#23460,#23461,#23483,#23504)); +#23460 = ORIENTED_EDGE('',*,*,#23288,.T.); +#23461 = ORIENTED_EDGE('',*,*,#23462,.T.); +#23462 = EDGE_CURVE('',#23262,#23463,#23465,.T.); +#23463 = VERTEX_POINT('',#23464); +#23464 = CARTESIAN_POINT('',(0.755,-0.625,0.525)); +#23465 = SURFACE_CURVE('',#23466,(#23469,#23476),.PCURVE_S1.); +#23466 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#23467,#23468),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#23467 = CARTESIAN_POINT('',(0.725135072626,-0.565270145251,0.1)); +#23468 = CARTESIAN_POINT('',(0.755,-0.625,0.525)); +#23469 = PCURVE('',#22868,#23470); +#23470 = DEFINITIONAL_REPRESENTATION('',(#23471),#23475); +#23471 = LINE('',#23472,#23473); +#23472 = CARTESIAN_POINT('',(0.134350288425,5.487304183425E-17)); +#23473 = VECTOR('',#23474,1.); +#23474 = DIRECTION('',(1.110223024625E-16,1.)); +#23475 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23476 = PCURVE('',#23277,#23477); +#23477 = DEFINITIONAL_REPRESENTATION('',(#23478),#23482); +#23478 = LINE('',#23479,#23480); +#23479 = CARTESIAN_POINT('',(8.929711347232E-17,2.282181838816E-17)); +#23480 = VECTOR('',#23481,1.); +#23481 = DIRECTION('',(-1.231479585974E-16,1.)); +#23482 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23483 = ORIENTED_EDGE('',*,*,#23484,.F.); +#23484 = EDGE_CURVE('',#22854,#23463,#23485,.T.); +#23485 = SURFACE_CURVE('',#23486,(#23490,#23497),.PCURVE_S1.); +#23486 = LINE('',#23487,#23488); +#23487 = CARTESIAN_POINT('',(0.85,-0.53,0.525)); +#23488 = VECTOR('',#23489,1.); +#23489 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#23490 = PCURVE('',#22868,#23491); +#23491 = DEFINITIONAL_REPRESENTATION('',(#23492),#23496); +#23492 = LINE('',#23493,#23494); +#23493 = CARTESIAN_POINT('',(2.477995760902E-17,1.)); +#23494 = VECTOR('',#23495,1.); +#23495 = DIRECTION('',(1.,-1.652728903883E-15)); +#23496 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23497 = PCURVE('',#23192,#23498); +#23498 = DEFINITIONAL_REPRESENTATION('',(#23499),#23503); +#23499 = LINE('',#23500,#23501); +#23500 = CARTESIAN_POINT('',(-0.,-0.15)); +#23501 = VECTOR('',#23502,1.); +#23502 = DIRECTION('',(1.,0.)); +#23503 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23504 = ORIENTED_EDGE('',*,*,#22853,.F.); +#23505 = ADVANCED_FACE('',(#23506),#22994,.F.); +#23506 = FACE_BOUND('',#23507,.F.); +#23507 = EDGE_LOOP('',(#23508,#23509,#23510,#23538)); +#23508 = ORIENTED_EDGE('',*,*,#23415,.T.); +#23509 = ORIENTED_EDGE('',*,*,#22980,.T.); +#23510 = ORIENTED_EDGE('',*,*,#23511,.F.); +#23511 = EDGE_CURVE('',#23512,#22981,#23514,.T.); +#23512 = VERTEX_POINT('',#23513); +#23513 = CARTESIAN_POINT('',(0.755,0.625,0.675)); +#23514 = SURFACE_CURVE('',#23515,(#23519,#23526),.PCURVE_S1.); +#23515 = LINE('',#23516,#23517); +#23516 = CARTESIAN_POINT('',(0.755,0.625,0.675)); +#23517 = VECTOR('',#23518,1.); +#23518 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#23519 = PCURVE('',#22994,#23520); +#23520 = DEFINITIONAL_REPRESENTATION('',(#23521),#23525); +#23521 = LINE('',#23522,#23523); +#23522 = CARTESIAN_POINT('',(0.,0.)); +#23523 = VECTOR('',#23524,1.); +#23524 = DIRECTION('',(1.,0.)); +#23525 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23526 = PCURVE('',#23527,#23532); +#23527 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#23528,#23529) + ,(#23530,#23531 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#23528 = CARTESIAN_POINT('',(0.755,0.625,0.675)); +#23529 = CARTESIAN_POINT('',(0.7425,0.6,0.675)); +#23530 = CARTESIAN_POINT('',(0.85,0.53,0.675)); +#23531 = CARTESIAN_POINT('',(0.825,0.5175,0.675)); +#23532 = DEFINITIONAL_REPRESENTATION('',(#23533),#23537); +#23533 = LINE('',#23534,#23535); +#23534 = CARTESIAN_POINT('',(-4.094030104823E-17,4.509354347099E-16)); +#23535 = VECTOR('',#23536,1.); +#23536 = DIRECTION('',(1.,-2.166355386428E-14)); +#23537 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23538 = ORIENTED_EDGE('',*,*,#23539,.F.); +#23539 = EDGE_CURVE('',#23416,#23512,#23540,.T.); +#23540 = SURFACE_CURVE('',#23541,(#23544,#23550),.PCURVE_S1.); +#23541 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#23542,#23543),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#23542 = CARTESIAN_POINT('',(0.755,0.625,0.525)); +#23543 = CARTESIAN_POINT('',(0.755,0.625,0.675)); +#23544 = PCURVE('',#22994,#23545); +#23545 = DEFINITIONAL_REPRESENTATION('',(#23546),#23549); +#23546 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#23547,#23548),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#23547 = CARTESIAN_POINT('',(0.,-0.15)); +#23548 = CARTESIAN_POINT('',(0.,0.)); +#23549 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23550 = PCURVE('',#23551,#23556); +#23551 = PLANE('',#23552); +#23552 = AXIS2_PLACEMENT_3D('',#23553,#23554,#23555); +#23553 = CARTESIAN_POINT('',(-0.755,0.625,0.675)); +#23554 = DIRECTION('',(0.,-1.,0.)); +#23555 = DIRECTION('',(1.,0.,0.)); +#23556 = DEFINITIONAL_REPRESENTATION('',(#23557),#23560); +#23557 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#23558,#23559),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#23558 = CARTESIAN_POINT('',(1.51,-0.15)); +#23559 = CARTESIAN_POINT('',(1.51,0.)); +#23560 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23561 = ADVANCED_FACE('',(#23562),#23021,.F.); +#23562 = FACE_BOUND('',#23563,.F.); +#23563 = EDGE_LOOP('',(#23564,#23586,#23587,#23609)); +#23564 = ORIENTED_EDGE('',*,*,#23565,.F.); +#23565 = EDGE_CURVE('',#22981,#23566,#23568,.T.); +#23566 = VERTEX_POINT('',#23567); +#23567 = CARTESIAN_POINT('',(0.825,0.5175,0.675)); +#23568 = SURFACE_CURVE('',#23569,(#23572,#23579),.PCURVE_S1.); +#23569 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#23570,#23571),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#23570 = CARTESIAN_POINT('',(0.85,0.53,0.675)); +#23571 = CARTESIAN_POINT('',(0.825,0.5175,0.675)); +#23572 = PCURVE('',#23021,#23573); +#23573 = DEFINITIONAL_REPRESENTATION('',(#23574),#23578); +#23574 = LINE('',#23575,#23576); +#23575 = CARTESIAN_POINT('',(1.652535194953E-16,-4.716546953905E-15)); +#23576 = VECTOR('',#23577,1.); +#23577 = DIRECTION('',(-5.375542812107E-18,1.)); +#23578 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23579 = PCURVE('',#23527,#23580); +#23580 = DEFINITIONAL_REPRESENTATION('',(#23581),#23585); +#23581 = LINE('',#23582,#23583); +#23582 = CARTESIAN_POINT('',(0.134350288425,-2.459569275266E-15)); +#23583 = VECTOR('',#23584,1.); +#23584 = DIRECTION('',(2.775557561563E-17,1.)); +#23585 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23586 = ORIENTED_EDGE('',*,*,#23007,.T.); +#23587 = ORIENTED_EDGE('',*,*,#23588,.T.); +#23588 = EDGE_CURVE('',#22448,#23589,#23591,.T.); +#23589 = VERTEX_POINT('',#23590); +#23590 = CARTESIAN_POINT('',(0.825,0.175,0.675)); +#23591 = SURFACE_CURVE('',#23592,(#23596,#23602),.PCURVE_S1.); +#23592 = LINE('',#23593,#23594); +#23593 = CARTESIAN_POINT('',(0.85,0.175,0.675)); +#23594 = VECTOR('',#23595,1.); +#23595 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#23596 = PCURVE('',#23021,#23597); +#23597 = DEFINITIONAL_REPRESENTATION('',(#23598),#23601); +#23598 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#23599,#23600),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,2.5E-02),.PIECEWISE_BEZIER_KNOTS.); +#23599 = CARTESIAN_POINT('',(0.355,-7.972584336167E-16)); +#23600 = CARTESIAN_POINT('',(0.35077294686,1.)); +#23601 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23602 = PCURVE('',#23051,#23603); +#23603 = DEFINITIONAL_REPRESENTATION('',(#23604),#23608); +#23604 = LINE('',#23605,#23606); +#23605 = CARTESIAN_POINT('',(0.,0.)); +#23606 = VECTOR('',#23607,1.); +#23607 = DIRECTION('',(1.,0.)); +#23608 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23609 = ORIENTED_EDGE('',*,*,#23610,.F.); +#23610 = EDGE_CURVE('',#23566,#23589,#23611,.T.); +#23611 = SURFACE_CURVE('',#23612,(#23616,#23622),.PCURVE_S1.); +#23612 = LINE('',#23613,#23614); +#23613 = CARTESIAN_POINT('',(0.825,0.5175,0.675)); +#23614 = VECTOR('',#23615,1.); +#23615 = DIRECTION('',(0.,-1.,0.)); +#23616 = PCURVE('',#23021,#23617); +#23617 = DEFINITIONAL_REPRESENTATION('',(#23618),#23621); +#23618 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#23619,#23620),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,0.3425),.PIECEWISE_BEZIER_KNOTS.); +#23619 = CARTESIAN_POINT('',(1.598779766831E-16,1.)); +#23620 = CARTESIAN_POINT('',(0.35077294686,1.)); +#23621 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23622 = PCURVE('',#23623,#23628); +#23623 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#23624,#23625) + ,(#23626,#23627 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.035),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#23624 = CARTESIAN_POINT('',(0.825,0.5175,0.675)); +#23625 = CARTESIAN_POINT('',(0.765270145251,0.487635072626,1.1)); +#23626 = CARTESIAN_POINT('',(0.825,-0.5175,0.675)); +#23627 = CARTESIAN_POINT('',(0.765270145251,-0.487635072626,1.1)); +#23628 = DEFINITIONAL_REPRESENTATION('',(#23629),#23633); +#23629 = LINE('',#23630,#23631); +#23630 = CARTESIAN_POINT('',(3.416910704045E-17,1.389425750114E-16)); +#23631 = VECTOR('',#23632,1.); +#23632 = DIRECTION('',(1.,-5.524697804285E-16)); +#23633 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23634 = ADVANCED_FACE('',(#23635),#23051,.F.); +#23635 = FACE_BOUND('',#23636,.F.); +#23636 = EDGE_LOOP('',(#23637,#23638,#23639,#23661)); +#23637 = ORIENTED_EDGE('',*,*,#23588,.F.); +#23638 = ORIENTED_EDGE('',*,*,#23037,.T.); +#23639 = ORIENTED_EDGE('',*,*,#23640,.T.); +#23640 = EDGE_CURVE('',#22649,#23641,#23643,.T.); +#23641 = VERTEX_POINT('',#23642); +#23642 = CARTESIAN_POINT('',(0.825,-0.175,0.675)); +#23643 = SURFACE_CURVE('',#23644,(#23648,#23655),.PCURVE_S1.); +#23644 = LINE('',#23645,#23646); +#23645 = CARTESIAN_POINT('',(0.85,-0.175,0.675)); +#23646 = VECTOR('',#23647,1.); +#23647 = DIRECTION('',(-1.,2.22044604925E-16,0.)); +#23648 = PCURVE('',#23051,#23649); +#23649 = DEFINITIONAL_REPRESENTATION('',(#23650),#23654); +#23650 = LINE('',#23651,#23652); +#23651 = CARTESIAN_POINT('',(-7.771561172375E-17,-0.35)); +#23652 = VECTOR('',#23653,1.); +#23653 = DIRECTION('',(1.,0.)); +#23654 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23655 = PCURVE('',#23217,#23656); +#23656 = DEFINITIONAL_REPRESENTATION('',(#23657),#23660); +#23657 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#23658,#23659),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,2.5E-02),.PIECEWISE_BEZIER_KNOTS.); +#23658 = CARTESIAN_POINT('',(0.705,-5.23815056492E-15)); +#23659 = CARTESIAN_POINT('',(0.70922705314,1.)); +#23660 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23661 = ORIENTED_EDGE('',*,*,#23662,.F.); +#23662 = EDGE_CURVE('',#23589,#23641,#23663,.T.); +#23663 = SURFACE_CURVE('',#23664,(#23668,#23675),.PCURVE_S1.); +#23664 = LINE('',#23665,#23666); +#23665 = CARTESIAN_POINT('',(0.825,0.5175,0.675)); +#23666 = VECTOR('',#23667,1.); +#23667 = DIRECTION('',(0.,-1.,0.)); +#23668 = PCURVE('',#23051,#23669); +#23669 = DEFINITIONAL_REPRESENTATION('',(#23670),#23674); +#23670 = LINE('',#23671,#23672); +#23671 = CARTESIAN_POINT('',(2.5E-02,0.3425)); +#23672 = VECTOR('',#23673,1.); +#23673 = DIRECTION('',(-2.22044604925E-16,-1.)); +#23674 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23675 = PCURVE('',#23623,#23676); +#23676 = DEFINITIONAL_REPRESENTATION('',(#23677),#23681); +#23677 = LINE('',#23678,#23679); +#23678 = CARTESIAN_POINT('',(0.,-6.332824760093E-17)); +#23679 = VECTOR('',#23680,1.); +#23680 = DIRECTION('',(1.,3.810196442501E-17)); +#23681 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23682 = ADVANCED_FACE('',(#23683),#23217,.F.); +#23683 = FACE_BOUND('',#23684,.F.); +#23684 = EDGE_LOOP('',(#23685,#23686,#23687,#23714)); +#23685 = ORIENTED_EDGE('',*,*,#23640,.F.); +#23686 = ORIENTED_EDGE('',*,*,#23203,.T.); +#23687 = ORIENTED_EDGE('',*,*,#23688,.T.); +#23688 = EDGE_CURVE('',#23179,#23689,#23691,.T.); +#23689 = VERTEX_POINT('',#23690); +#23690 = CARTESIAN_POINT('',(0.825,-0.5175,0.675)); +#23691 = SURFACE_CURVE('',#23692,(#23695,#23702),.PCURVE_S1.); +#23692 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#23693,#23694),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#23693 = CARTESIAN_POINT('',(0.85,-0.53,0.675)); +#23694 = CARTESIAN_POINT('',(0.825,-0.5175,0.675)); +#23695 = PCURVE('',#23217,#23696); +#23696 = DEFINITIONAL_REPRESENTATION('',(#23697),#23701); +#23697 = LINE('',#23698,#23699); +#23698 = CARTESIAN_POINT('',(1.06,-1.166001679449E-15)); +#23699 = VECTOR('',#23700,1.); +#23700 = DIRECTION('',(2.22044604925E-16,1.)); +#23701 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23702 = PCURVE('',#23703,#23708); +#23703 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#23704,#23705) + ,(#23706,#23707 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#23704 = CARTESIAN_POINT('',(0.85,-0.53,0.675)); +#23705 = CARTESIAN_POINT('',(0.825,-0.5175,0.675)); +#23706 = CARTESIAN_POINT('',(0.755,-0.625,0.675)); +#23707 = CARTESIAN_POINT('',(0.7425,-0.6,0.675)); +#23708 = DEFINITIONAL_REPRESENTATION('',(#23709),#23713); +#23709 = LINE('',#23710,#23711); +#23710 = CARTESIAN_POINT('',(-3.973073758596E-17,4.485501618063E-16)); +#23711 = VECTOR('',#23712,1.); +#23712 = DIRECTION('',(-5.354192651592E-18,1.)); +#23713 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23714 = ORIENTED_EDGE('',*,*,#23715,.F.); +#23715 = EDGE_CURVE('',#23641,#23689,#23716,.T.); +#23716 = SURFACE_CURVE('',#23717,(#23721,#23727),.PCURVE_S1.); +#23717 = LINE('',#23718,#23719); +#23718 = CARTESIAN_POINT('',(0.825,0.5175,0.675)); +#23719 = VECTOR('',#23720,1.); +#23720 = DIRECTION('',(0.,-1.,0.)); +#23721 = PCURVE('',#23217,#23722); +#23722 = DEFINITIONAL_REPRESENTATION('',(#23723),#23726); +#23723 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#23724,#23725),.UNSPECIFIED., + .F.,.F.,(2,2),(0.6925,1.035),.PIECEWISE_BEZIER_KNOTS.); +#23724 = CARTESIAN_POINT('',(0.70922705314,1.)); +#23725 = CARTESIAN_POINT('',(1.06,1.)); +#23726 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23727 = PCURVE('',#23623,#23728); +#23728 = DEFINITIONAL_REPRESENTATION('',(#23729),#23733); +#23729 = LINE('',#23730,#23731); +#23730 = CARTESIAN_POINT('',(0.,-8.950037803615E-17)); +#23731 = VECTOR('',#23732,1.); +#23732 = DIRECTION('',(1.,7.589565458417E-17)); +#23733 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23734 = ADVANCED_FACE('',(#23735),#23192,.F.); +#23735 = FACE_BOUND('',#23736,.F.); +#23736 = EDGE_LOOP('',(#23737,#23738,#23763,#23784)); +#23737 = ORIENTED_EDGE('',*,*,#23484,.T.); +#23738 = ORIENTED_EDGE('',*,*,#23739,.T.); +#23739 = EDGE_CURVE('',#23463,#23740,#23742,.T.); +#23740 = VERTEX_POINT('',#23741); +#23741 = CARTESIAN_POINT('',(0.755,-0.625,0.675)); +#23742 = SURFACE_CURVE('',#23743,(#23746,#23752),.PCURVE_S1.); +#23743 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#23744,#23745),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#23744 = CARTESIAN_POINT('',(0.755,-0.625,0.525)); +#23745 = CARTESIAN_POINT('',(0.755,-0.625,0.675)); +#23746 = PCURVE('',#23192,#23747); +#23747 = DEFINITIONAL_REPRESENTATION('',(#23748),#23751); +#23748 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#23749,#23750),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#23749 = CARTESIAN_POINT('',(0.134350288425,-0.15)); +#23750 = CARTESIAN_POINT('',(0.134350288425,0.)); +#23751 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23752 = PCURVE('',#23753,#23758); +#23753 = PLANE('',#23754); +#23754 = AXIS2_PLACEMENT_3D('',#23755,#23756,#23757); +#23755 = CARTESIAN_POINT('',(0.755,-0.625,0.675)); +#23756 = DIRECTION('',(0.,1.,0.)); +#23757 = DIRECTION('',(-1.,0.,0.)); +#23758 = DEFINITIONAL_REPRESENTATION('',(#23759),#23762); +#23759 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#23760,#23761),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#23760 = CARTESIAN_POINT('',(0.,-0.15)); +#23761 = CARTESIAN_POINT('',(0.,0.)); +#23762 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23763 = ORIENTED_EDGE('',*,*,#23764,.F.); +#23764 = EDGE_CURVE('',#23179,#23740,#23765,.T.); +#23765 = SURFACE_CURVE('',#23766,(#23770,#23777),.PCURVE_S1.); +#23766 = LINE('',#23767,#23768); +#23767 = CARTESIAN_POINT('',(0.85,-0.53,0.675)); +#23768 = VECTOR('',#23769,1.); +#23769 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#23770 = PCURVE('',#23192,#23771); +#23771 = DEFINITIONAL_REPRESENTATION('',(#23772),#23776); +#23772 = LINE('',#23773,#23774); +#23773 = CARTESIAN_POINT('',(0.,0.)); +#23774 = VECTOR('',#23775,1.); +#23775 = DIRECTION('',(1.,0.)); +#23776 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23777 = PCURVE('',#23703,#23778); +#23778 = DEFINITIONAL_REPRESENTATION('',(#23779),#23783); +#23779 = LINE('',#23780,#23781); +#23780 = CARTESIAN_POINT('',(-3.973073758596E-17,4.485501618063E-16)); +#23781 = VECTOR('',#23782,1.); +#23782 = DIRECTION('',(1.,2.244230446166E-14)); +#23783 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23784 = ORIENTED_EDGE('',*,*,#23178,.F.); +#23785 = ADVANCED_FACE('',(#23786),#23399,.F.); +#23786 = FACE_BOUND('',#23787,.F.); +#23787 = EDGE_LOOP('',(#23788,#23789,#23811,#23839,#23867,#23895)); +#23788 = ORIENTED_EDGE('',*,*,#23385,.T.); +#23789 = ORIENTED_EDGE('',*,*,#23790,.T.); +#23790 = EDGE_CURVE('',#23359,#23791,#23793,.T.); +#23791 = VERTEX_POINT('',#23792); +#23792 = CARTESIAN_POINT('',(-0.85,0.53,0.525)); +#23793 = SURFACE_CURVE('',#23794,(#23797,#23804),.PCURVE_S1.); +#23794 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#23795,#23796),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#23795 = CARTESIAN_POINT('',(-0.790270145251,0.500135072626,0.1)); +#23796 = CARTESIAN_POINT('',(-0.85,0.53,0.525)); +#23797 = PCURVE('',#23399,#23798); +#23798 = DEFINITIONAL_REPRESENTATION('',(#23799),#23803); +#23799 = LINE('',#23800,#23801); +#23800 = CARTESIAN_POINT('',(1.06,9.157273591569E-17)); +#23801 = VECTOR('',#23802,1.); +#23802 = DIRECTION('',(-2.22044604925E-16,1.)); +#23803 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23804 = PCURVE('',#23374,#23805); +#23805 = DEFINITIONAL_REPRESENTATION('',(#23806),#23810); +#23806 = LINE('',#23807,#23808); +#23807 = CARTESIAN_POINT('',(8.990043132857E-18,1.009992494945E-16)); +#23808 = VECTOR('',#23809,1.); +#23809 = DIRECTION('',(1.039327883682E-17,1.)); +#23810 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23811 = ORIENTED_EDGE('',*,*,#23812,.F.); +#23812 = EDGE_CURVE('',#23813,#23791,#23815,.T.); +#23813 = VERTEX_POINT('',#23814); +#23814 = CARTESIAN_POINT('',(-0.85,0.175,0.525)); +#23815 = SURFACE_CURVE('',#23816,(#23820,#23827),.PCURVE_S1.); +#23816 = LINE('',#23817,#23818); +#23817 = CARTESIAN_POINT('',(-0.85,-0.53,0.525)); +#23818 = VECTOR('',#23819,1.); +#23819 = DIRECTION('',(0.,1.,0.)); +#23820 = PCURVE('',#23399,#23821); +#23821 = DEFINITIONAL_REPRESENTATION('',(#23822),#23826); +#23822 = LINE('',#23823,#23824); +#23823 = CARTESIAN_POINT('',(0.,1.)); +#23824 = VECTOR('',#23825,1.); +#23825 = DIRECTION('',(1.,9.382166405283E-16)); +#23826 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23827 = PCURVE('',#23828,#23833); +#23828 = PLANE('',#23829); +#23829 = AXIS2_PLACEMENT_3D('',#23830,#23831,#23832); +#23830 = CARTESIAN_POINT('',(-0.85,-0.53,0.675)); +#23831 = DIRECTION('',(1.,0.,0.)); +#23832 = DIRECTION('',(-0.,1.,0.)); +#23833 = DEFINITIONAL_REPRESENTATION('',(#23834),#23838); +#23834 = LINE('',#23835,#23836); +#23835 = CARTESIAN_POINT('',(0.,-0.15)); +#23836 = VECTOR('',#23837,1.); +#23837 = DIRECTION('',(1.,0.)); +#23838 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23839 = ORIENTED_EDGE('',*,*,#23840,.F.); +#23840 = EDGE_CURVE('',#23841,#23813,#23843,.T.); +#23841 = VERTEX_POINT('',#23842); +#23842 = CARTESIAN_POINT('',(-0.85,-0.175,0.525)); +#23843 = SURFACE_CURVE('',#23844,(#23848,#23855),.PCURVE_S1.); +#23844 = LINE('',#23845,#23846); +#23845 = CARTESIAN_POINT('',(-0.85,-0.175,0.525)); +#23846 = VECTOR('',#23847,1.); +#23847 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#23848 = PCURVE('',#23399,#23849); +#23849 = DEFINITIONAL_REPRESENTATION('',(#23850),#23854); +#23850 = LINE('',#23851,#23852); +#23851 = CARTESIAN_POINT('',(0.355,1.)); +#23852 = VECTOR('',#23853,1.); +#23853 = DIRECTION('',(1.,9.51619735393E-16)); +#23854 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23855 = PCURVE('',#23856,#23861); +#23856 = CYLINDRICAL_SURFACE('',#23857,7.E-02); +#23857 = AXIS2_PLACEMENT_3D('',#23858,#23859,#23860); +#23858 = CARTESIAN_POINT('',(-0.85,-0.175,0.455)); +#23859 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#23860 = DIRECTION('',(0.,0.,1.)); +#23861 = DEFINITIONAL_REPRESENTATION('',(#23862),#23866); +#23862 = LINE('',#23863,#23864); +#23863 = CARTESIAN_POINT('',(0.,0.)); +#23864 = VECTOR('',#23865,1.); +#23865 = DIRECTION('',(0.,-1.)); +#23866 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23867 = ORIENTED_EDGE('',*,*,#23868,.F.); +#23868 = EDGE_CURVE('',#23869,#23841,#23871,.T.); +#23869 = VERTEX_POINT('',#23870); +#23870 = CARTESIAN_POINT('',(-0.85,-0.53,0.525)); +#23871 = SURFACE_CURVE('',#23872,(#23876,#23883),.PCURVE_S1.); +#23872 = LINE('',#23873,#23874); +#23873 = CARTESIAN_POINT('',(-0.85,-0.53,0.525)); +#23874 = VECTOR('',#23875,1.); +#23875 = DIRECTION('',(0.,1.,0.)); +#23876 = PCURVE('',#23399,#23877); +#23877 = DEFINITIONAL_REPRESENTATION('',(#23878),#23882); +#23878 = LINE('',#23879,#23880); +#23879 = CARTESIAN_POINT('',(-2.525705101036E-17,1.)); +#23880 = VECTOR('',#23881,1.); +#23881 = DIRECTION('',(1.,9.382166405283E-16)); +#23882 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23883 = PCURVE('',#23884,#23889); +#23884 = PLANE('',#23885); +#23885 = AXIS2_PLACEMENT_3D('',#23886,#23887,#23888); +#23886 = CARTESIAN_POINT('',(-0.85,-0.53,0.675)); +#23887 = DIRECTION('',(1.,0.,0.)); +#23888 = DIRECTION('',(-0.,1.,0.)); +#23889 = DEFINITIONAL_REPRESENTATION('',(#23890),#23894); +#23890 = LINE('',#23891,#23892); +#23891 = CARTESIAN_POINT('',(0.,-0.15)); +#23892 = VECTOR('',#23893,1.); +#23893 = DIRECTION('',(1.,0.)); +#23894 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23895 = ORIENTED_EDGE('',*,*,#23896,.F.); +#23896 = EDGE_CURVE('',#23235,#23869,#23897,.T.); +#23897 = SURFACE_CURVE('',#23898,(#23901,#23908),.PCURVE_S1.); +#23898 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#23899,#23900),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#23899 = CARTESIAN_POINT('',(-0.790270145251,-0.500135072626,0.1)); +#23900 = CARTESIAN_POINT('',(-0.85,-0.53,0.525)); +#23901 = PCURVE('',#23399,#23902); +#23902 = DEFINITIONAL_REPRESENTATION('',(#23903),#23907); +#23903 = LINE('',#23904,#23905); +#23904 = CARTESIAN_POINT('',(-1.109673124001E-16,7.633291906977E-17)); +#23905 = VECTOR('',#23906,1.); +#23906 = DIRECTION('',(9.336073486156E-17,1.)); +#23907 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23908 = PCURVE('',#23250,#23909); +#23909 = DEFINITIONAL_REPRESENTATION('',(#23910),#23914); +#23910 = LINE('',#23911,#23912); +#23911 = CARTESIAN_POINT('',(0.134350288425,7.857456237696E-17)); +#23912 = VECTOR('',#23913,1.); +#23913 = DIRECTION('',(-5.551115123126E-17,1.)); +#23914 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23915 = ADVANCED_FACE('',(#23916),#23374,.F.); +#23916 = FACE_BOUND('',#23917,.F.); +#23917 = EDGE_LOOP('',(#23918,#23919,#23941,#23967)); +#23918 = ORIENTED_EDGE('',*,*,#23358,.T.); +#23919 = ORIENTED_EDGE('',*,*,#23920,.T.); +#23920 = EDGE_CURVE('',#23332,#23921,#23923,.T.); +#23921 = VERTEX_POINT('',#23922); +#23922 = CARTESIAN_POINT('',(-0.755,0.625,0.525)); +#23923 = SURFACE_CURVE('',#23924,(#23927,#23934),.PCURVE_S1.); +#23924 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#23925,#23926),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#23925 = CARTESIAN_POINT('',(-0.725135072626,0.565270145251,0.1)); +#23926 = CARTESIAN_POINT('',(-0.755,0.625,0.525)); +#23927 = PCURVE('',#23374,#23928); +#23928 = DEFINITIONAL_REPRESENTATION('',(#23929),#23933); +#23929 = LINE('',#23930,#23931); +#23930 = CARTESIAN_POINT('',(0.134350288425,5.487304183425E-17)); +#23931 = VECTOR('',#23932,1.); +#23932 = DIRECTION('',(1.110223024625E-16,1.)); +#23933 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23934 = PCURVE('',#23347,#23935); +#23935 = DEFINITIONAL_REPRESENTATION('',(#23936),#23940); +#23936 = LINE('',#23937,#23938); +#23937 = CARTESIAN_POINT('',(8.929711347232E-17,2.282181838816E-17)); +#23938 = VECTOR('',#23939,1.); +#23939 = DIRECTION('',(-1.231479585974E-16,1.)); +#23940 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23941 = ORIENTED_EDGE('',*,*,#23942,.F.); +#23942 = EDGE_CURVE('',#23791,#23921,#23943,.T.); +#23943 = SURFACE_CURVE('',#23944,(#23948,#23955),.PCURVE_S1.); +#23944 = LINE('',#23945,#23946); +#23945 = CARTESIAN_POINT('',(-0.85,0.53,0.525)); +#23946 = VECTOR('',#23947,1.); +#23947 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#23948 = PCURVE('',#23374,#23949); +#23949 = DEFINITIONAL_REPRESENTATION('',(#23950),#23954); +#23950 = LINE('',#23951,#23952); +#23951 = CARTESIAN_POINT('',(2.477995760902E-17,1.)); +#23952 = VECTOR('',#23953,1.); +#23953 = DIRECTION('',(1.,-1.652728903883E-15)); +#23954 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23955 = PCURVE('',#23956,#23961); +#23956 = PLANE('',#23957); +#23957 = AXIS2_PLACEMENT_3D('',#23958,#23959,#23960); +#23958 = CARTESIAN_POINT('',(-0.85,0.53,0.675)); +#23959 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#23960 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#23961 = DEFINITIONAL_REPRESENTATION('',(#23962),#23966); +#23962 = LINE('',#23963,#23964); +#23963 = CARTESIAN_POINT('',(0.,-0.15)); +#23964 = VECTOR('',#23965,1.); +#23965 = DIRECTION('',(1.,0.)); +#23966 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23967 = ORIENTED_EDGE('',*,*,#23790,.F.); +#23968 = ADVANCED_FACE('',(#23969),#23347,.F.); +#23969 = FACE_BOUND('',#23970,.F.); +#23970 = EDGE_LOOP('',(#23971,#23972,#23973,#23994)); +#23971 = ORIENTED_EDGE('',*,*,#23331,.T.); +#23972 = ORIENTED_EDGE('',*,*,#23438,.T.); +#23973 = ORIENTED_EDGE('',*,*,#23974,.F.); +#23974 = EDGE_CURVE('',#23921,#23416,#23975,.T.); +#23975 = SURFACE_CURVE('',#23976,(#23980,#23987),.PCURVE_S1.); +#23976 = LINE('',#23977,#23978); +#23977 = CARTESIAN_POINT('',(-0.755,0.625,0.525)); +#23978 = VECTOR('',#23979,1.); +#23979 = DIRECTION('',(1.,0.,0.)); +#23980 = PCURVE('',#23347,#23981); +#23981 = DEFINITIONAL_REPRESENTATION('',(#23982),#23986); +#23982 = LINE('',#23983,#23984); +#23983 = CARTESIAN_POINT('',(-3.385084512509E-17,1.)); +#23984 = VECTOR('',#23985,1.); +#23985 = DIRECTION('',(1.,0.)); +#23986 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23987 = PCURVE('',#23551,#23988); +#23988 = DEFINITIONAL_REPRESENTATION('',(#23989),#23993); +#23989 = LINE('',#23990,#23991); +#23990 = CARTESIAN_POINT('',(0.,-0.15)); +#23991 = VECTOR('',#23992,1.); +#23992 = DIRECTION('',(1.,0.)); +#23993 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#23994 = ORIENTED_EDGE('',*,*,#23920,.F.); +#23995 = ADVANCED_FACE('',(#23996),#23277,.F.); +#23996 = FACE_BOUND('',#23997,.F.); +#23997 = EDGE_LOOP('',(#23998,#23999,#24021,#24042)); +#23998 = ORIENTED_EDGE('',*,*,#23261,.T.); +#23999 = ORIENTED_EDGE('',*,*,#24000,.T.); +#24000 = EDGE_CURVE('',#23233,#24001,#24003,.T.); +#24001 = VERTEX_POINT('',#24002); +#24002 = CARTESIAN_POINT('',(-0.755,-0.625,0.525)); +#24003 = SURFACE_CURVE('',#24004,(#24007,#24014),.PCURVE_S1.); +#24004 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#24005,#24006),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#24005 = CARTESIAN_POINT('',(-0.725135072626,-0.565270145251,0.1)); +#24006 = CARTESIAN_POINT('',(-0.755,-0.625,0.525)); +#24007 = PCURVE('',#23277,#24008); +#24008 = DEFINITIONAL_REPRESENTATION('',(#24009),#24013); +#24009 = LINE('',#24010,#24011); +#24010 = CARTESIAN_POINT('',(1.51,1.768190662056E-17)); +#24011 = VECTOR('',#24012,1.); +#24012 = DIRECTION('',(2.22044604925E-16,1.)); +#24013 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24014 = PCURVE('',#23250,#24015); +#24015 = DEFINITIONAL_REPRESENTATION('',(#24016),#24020); +#24016 = LINE('',#24017,#24018); +#24017 = CARTESIAN_POINT('',(7.648479574907E-18,6.541530374399E-17)); +#24018 = VECTOR('',#24019,1.); +#24019 = DIRECTION('',(1.059643011366E-17,1.)); +#24020 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24021 = ORIENTED_EDGE('',*,*,#24022,.F.); +#24022 = EDGE_CURVE('',#23463,#24001,#24023,.T.); +#24023 = SURFACE_CURVE('',#24024,(#24028,#24035),.PCURVE_S1.); +#24024 = LINE('',#24025,#24026); +#24025 = CARTESIAN_POINT('',(0.755,-0.625,0.525)); +#24026 = VECTOR('',#24027,1.); +#24027 = DIRECTION('',(-1.,0.,0.)); +#24028 = PCURVE('',#23277,#24029); +#24029 = DEFINITIONAL_REPRESENTATION('',(#24030),#24034); +#24030 = LINE('',#24031,#24032); +#24031 = CARTESIAN_POINT('',(-3.385084512509E-17,1.)); +#24032 = VECTOR('',#24033,1.); +#24033 = DIRECTION('',(1.,0.)); +#24034 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24035 = PCURVE('',#23753,#24036); +#24036 = DEFINITIONAL_REPRESENTATION('',(#24037),#24041); +#24037 = LINE('',#24038,#24039); +#24038 = CARTESIAN_POINT('',(0.,-0.15)); +#24039 = VECTOR('',#24040,1.); +#24040 = DIRECTION('',(1.,0.)); +#24041 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24042 = ORIENTED_EDGE('',*,*,#23462,.F.); +#24043 = ADVANCED_FACE('',(#24044),#23250,.F.); +#24044 = FACE_BOUND('',#24045,.F.); +#24045 = EDGE_LOOP('',(#24046,#24047,#24048,#24074)); +#24046 = ORIENTED_EDGE('',*,*,#23232,.T.); +#24047 = ORIENTED_EDGE('',*,*,#23896,.T.); +#24048 = ORIENTED_EDGE('',*,*,#24049,.F.); +#24049 = EDGE_CURVE('',#24001,#23869,#24050,.T.); +#24050 = SURFACE_CURVE('',#24051,(#24055,#24062),.PCURVE_S1.); +#24051 = LINE('',#24052,#24053); +#24052 = CARTESIAN_POINT('',(-0.755,-0.625,0.525)); +#24053 = VECTOR('',#24054,1.); +#24054 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#24055 = PCURVE('',#23250,#24056); +#24056 = DEFINITIONAL_REPRESENTATION('',(#24057),#24061); +#24057 = LINE('',#24058,#24059); +#24058 = CARTESIAN_POINT('',(2.364154532791E-17,1.)); +#24059 = VECTOR('',#24060,1.); +#24060 = DIRECTION('',(1.,-1.652728903883E-15)); +#24061 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24062 = PCURVE('',#24063,#24068); +#24063 = PLANE('',#24064); +#24064 = AXIS2_PLACEMENT_3D('',#24065,#24066,#24067); +#24065 = CARTESIAN_POINT('',(-0.755,-0.625,0.675)); +#24066 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#24067 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#24068 = DEFINITIONAL_REPRESENTATION('',(#24069),#24073); +#24069 = LINE('',#24070,#24071); +#24070 = CARTESIAN_POINT('',(0.,-0.15)); +#24071 = VECTOR('',#24072,1.); +#24072 = DIRECTION('',(1.,0.)); +#24073 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24074 = ORIENTED_EDGE('',*,*,#24000,.F.); +#24075 = ADVANCED_FACE('',(#24076),#23527,.F.); +#24076 = FACE_BOUND('',#24077,.F.); +#24077 = EDGE_LOOP('',(#24078,#24079,#24080,#24107)); +#24078 = ORIENTED_EDGE('',*,*,#23511,.T.); +#24079 = ORIENTED_EDGE('',*,*,#23565,.T.); +#24080 = ORIENTED_EDGE('',*,*,#24081,.F.); +#24081 = EDGE_CURVE('',#24082,#23566,#24084,.T.); +#24082 = VERTEX_POINT('',#24083); +#24083 = CARTESIAN_POINT('',(0.7425,0.6,0.675)); +#24084 = SURFACE_CURVE('',#24085,(#24089,#24095),.PCURVE_S1.); +#24085 = LINE('',#24086,#24087); +#24086 = CARTESIAN_POINT('',(0.7425,0.6,0.675)); +#24087 = VECTOR('',#24088,1.); +#24088 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#24089 = PCURVE('',#23527,#24090); +#24090 = DEFINITIONAL_REPRESENTATION('',(#24091),#24094); +#24091 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#24092,#24093),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,0.116672618896),.PIECEWISE_BEZIER_KNOTS.); +#24092 = CARTESIAN_POINT('',(6.2009507115E-17,1.)); +#24093 = CARTESIAN_POINT('',(0.134350288425,1.)); +#24094 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24095 = PCURVE('',#24096,#24101); +#24096 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#24097,#24098) + ,(#24099,#24100 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#24097 = CARTESIAN_POINT('',(0.7425,0.6,0.675)); +#24098 = CARTESIAN_POINT('',(0.712635072626,0.540270145251,1.1)); +#24099 = CARTESIAN_POINT('',(0.825,0.5175,0.675)); +#24100 = CARTESIAN_POINT('',(0.765270145251,0.487635072626,1.1)); +#24101 = DEFINITIONAL_REPRESENTATION('',(#24102),#24106); +#24102 = LINE('',#24103,#24104); +#24103 = CARTESIAN_POINT('',(8.358145838124E-17,5.777391372306E-17)); +#24104 = VECTOR('',#24105,1.); +#24105 = DIRECTION('',(1.,-4.611496109259E-16)); +#24106 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24107 = ORIENTED_EDGE('',*,*,#24108,.F.); +#24108 = EDGE_CURVE('',#23512,#24082,#24109,.T.); +#24109 = SURFACE_CURVE('',#24110,(#24113,#24120),.PCURVE_S1.); +#24110 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#24111,#24112),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#24111 = CARTESIAN_POINT('',(0.755,0.625,0.675)); +#24112 = CARTESIAN_POINT('',(0.7425,0.6,0.675)); +#24113 = PCURVE('',#23527,#24114); +#24114 = DEFINITIONAL_REPRESENTATION('',(#24115),#24119); +#24115 = LINE('',#24116,#24117); +#24116 = CARTESIAN_POINT('',(-4.094030104823E-17,4.509354347099E-16)); +#24117 = VECTOR('',#24118,1.); +#24118 = DIRECTION('',(1.029498081632E-16,1.)); +#24119 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24120 = PCURVE('',#24121,#24126); +#24121 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#24122,#24123) + ,(#24124,#24125 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.51),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#24122 = CARTESIAN_POINT('',(-0.755,0.625,0.675)); +#24123 = CARTESIAN_POINT('',(-0.7425,0.6,0.675)); +#24124 = CARTESIAN_POINT('',(0.755,0.625,0.675)); +#24125 = CARTESIAN_POINT('',(0.7425,0.6,0.675)); +#24126 = DEFINITIONAL_REPRESENTATION('',(#24127),#24131); +#24127 = LINE('',#24128,#24129); +#24128 = CARTESIAN_POINT('',(1.51,3.888947165922E-15)); +#24129 = VECTOR('',#24130,1.); +#24130 = DIRECTION('',(-2.22044604925E-16,1.)); +#24131 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24132 = ADVANCED_FACE('',(#24133),#23551,.F.); +#24133 = FACE_BOUND('',#24134,.F.); +#24134 = EDGE_LOOP('',(#24135,#24136,#24137,#24160)); +#24135 = ORIENTED_EDGE('',*,*,#23974,.T.); +#24136 = ORIENTED_EDGE('',*,*,#23539,.T.); +#24137 = ORIENTED_EDGE('',*,*,#24138,.F.); +#24138 = EDGE_CURVE('',#24139,#23512,#24141,.T.); +#24139 = VERTEX_POINT('',#24140); +#24140 = CARTESIAN_POINT('',(-0.755,0.625,0.675)); +#24141 = SURFACE_CURVE('',#24142,(#24146,#24153),.PCURVE_S1.); +#24142 = LINE('',#24143,#24144); +#24143 = CARTESIAN_POINT('',(-0.755,0.625,0.675)); +#24144 = VECTOR('',#24145,1.); +#24145 = DIRECTION('',(1.,0.,0.)); +#24146 = PCURVE('',#23551,#24147); +#24147 = DEFINITIONAL_REPRESENTATION('',(#24148),#24152); +#24148 = LINE('',#24149,#24150); +#24149 = CARTESIAN_POINT('',(0.,0.)); +#24150 = VECTOR('',#24151,1.); +#24151 = DIRECTION('',(1.,0.)); +#24152 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24153 = PCURVE('',#24121,#24154); +#24154 = DEFINITIONAL_REPRESENTATION('',(#24155),#24159); +#24155 = LINE('',#24156,#24157); +#24156 = CARTESIAN_POINT('',(1.630651267444E-16,-5.571489971276E-16)); +#24157 = VECTOR('',#24158,1.); +#24158 = DIRECTION('',(1.,3.446400363452E-18)); +#24159 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24160 = ORIENTED_EDGE('',*,*,#24161,.F.); +#24161 = EDGE_CURVE('',#23921,#24139,#24162,.T.); +#24162 = SURFACE_CURVE('',#24163,(#24166,#24172),.PCURVE_S1.); +#24163 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#24164,#24165),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#24164 = CARTESIAN_POINT('',(-0.755,0.625,0.525)); +#24165 = CARTESIAN_POINT('',(-0.755,0.625,0.675)); +#24166 = PCURVE('',#23551,#24167); +#24167 = DEFINITIONAL_REPRESENTATION('',(#24168),#24171); +#24168 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#24169,#24170),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#24169 = CARTESIAN_POINT('',(0.,-0.15)); +#24170 = CARTESIAN_POINT('',(0.,0.)); +#24171 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24172 = PCURVE('',#23956,#24173); +#24173 = DEFINITIONAL_REPRESENTATION('',(#24174),#24177); +#24174 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#24175,#24176),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#24175 = CARTESIAN_POINT('',(0.134350288425,-0.15)); +#24176 = CARTESIAN_POINT('',(0.134350288425,0.)); +#24177 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24178 = ADVANCED_FACE('',(#24179),#23623,.F.); +#24179 = FACE_BOUND('',#24180,.F.); +#24180 = EDGE_LOOP('',(#24181,#24182,#24183,#24184,#24211,#24238)); +#24181 = ORIENTED_EDGE('',*,*,#23610,.T.); +#24182 = ORIENTED_EDGE('',*,*,#23662,.T.); +#24183 = ORIENTED_EDGE('',*,*,#23715,.T.); +#24184 = ORIENTED_EDGE('',*,*,#24185,.T.); +#24185 = EDGE_CURVE('',#23689,#24186,#24188,.T.); +#24186 = VERTEX_POINT('',#24187); +#24187 = CARTESIAN_POINT('',(0.765270145251,-0.487635072626,1.1)); +#24188 = SURFACE_CURVE('',#24189,(#24192,#24199),.PCURVE_S1.); +#24189 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#24190,#24191),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#24190 = CARTESIAN_POINT('',(0.825,-0.5175,0.675)); +#24191 = CARTESIAN_POINT('',(0.765270145251,-0.487635072626,1.1)); +#24192 = PCURVE('',#23623,#24193); +#24193 = DEFINITIONAL_REPRESENTATION('',(#24194),#24198); +#24194 = LINE('',#24195,#24196); +#24195 = CARTESIAN_POINT('',(1.035,-1.094837554154E-17)); +#24196 = VECTOR('',#24197,1.); +#24197 = DIRECTION('',(0.,1.)); +#24198 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24199 = PCURVE('',#24200,#24205); +#24200 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#24201,#24202) + ,(#24203,#24204 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#24201 = CARTESIAN_POINT('',(0.825,-0.5175,0.675)); +#24202 = CARTESIAN_POINT('',(0.765270145251,-0.487635072626,1.1)); +#24203 = CARTESIAN_POINT('',(0.7425,-0.6,0.675)); +#24204 = CARTESIAN_POINT('',(0.712635072626,-0.540270145251,1.1)); +#24205 = DEFINITIONAL_REPRESENTATION('',(#24206),#24210); +#24206 = LINE('',#24207,#24208); +#24207 = CARTESIAN_POINT('',(-1.121509151091E-16,4.009344429045E-18)); +#24208 = VECTOR('',#24209,1.); +#24209 = DIRECTION('',(3.760975051646E-18,1.)); +#24210 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24211 = ORIENTED_EDGE('',*,*,#24212,.F.); +#24212 = EDGE_CURVE('',#24213,#24186,#24215,.T.); +#24213 = VERTEX_POINT('',#24214); +#24214 = CARTESIAN_POINT('',(0.765270145251,0.487635072626,1.1)); +#24215 = SURFACE_CURVE('',#24216,(#24220,#24226),.PCURVE_S1.); +#24216 = LINE('',#24217,#24218); +#24217 = CARTESIAN_POINT('',(0.765270145251,0.487635072626,1.1)); +#24218 = VECTOR('',#24219,1.); +#24219 = DIRECTION('',(0.,-1.,0.)); +#24220 = PCURVE('',#23623,#24221); +#24221 = DEFINITIONAL_REPRESENTATION('',(#24222),#24225); +#24222 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#24223,#24224),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,0.975270145252),.PIECEWISE_BEZIER_KNOTS.); +#24223 = CARTESIAN_POINT('',(-4.989202318042E-17,1.)); +#24224 = CARTESIAN_POINT('',(1.035,1.)); +#24225 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24226 = PCURVE('',#24227,#24232); +#24227 = PLANE('',#24228); +#24228 = AXIS2_PLACEMENT_3D('',#24229,#24230,#24231); +#24229 = CARTESIAN_POINT('',(-0.765270145251,-0.487635072626,1.1)); +#24230 = DIRECTION('',(0.,0.,1.)); +#24231 = DIRECTION('',(0.84333939541,0.537381302382,-0.)); +#24232 = DEFINITIONAL_REPRESENTATION('',(#24233),#24237); +#24233 = LINE('',#24234,#24235); +#24234 = CARTESIAN_POINT('',(1.814856864072,1.552091788426E-13)); +#24235 = VECTOR('',#24236,1.); +#24236 = DIRECTION('',(-0.537381302382,-0.84333939541)); +#24237 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24238 = ORIENTED_EDGE('',*,*,#24239,.F.); +#24239 = EDGE_CURVE('',#23566,#24213,#24240,.T.); +#24240 = SURFACE_CURVE('',#24241,(#24244,#24251),.PCURVE_S1.); +#24241 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#24242,#24243),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#24242 = CARTESIAN_POINT('',(0.825,0.5175,0.675)); +#24243 = CARTESIAN_POINT('',(0.765270145251,0.487635072626,1.1)); +#24244 = PCURVE('',#23623,#24245); +#24245 = DEFINITIONAL_REPRESENTATION('',(#24246),#24250); +#24246 = LINE('',#24247,#24248); +#24247 = CARTESIAN_POINT('',(3.416910704045E-17,1.389425750114E-16)); +#24248 = VECTOR('',#24249,1.); +#24249 = DIRECTION('',(-2.515023070851E-17,1.)); +#24250 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24251 = PCURVE('',#24096,#24252); +#24252 = DEFINITIONAL_REPRESENTATION('',(#24253),#24257); +#24253 = LINE('',#24254,#24255); +#24254 = CARTESIAN_POINT('',(0.116672618896,3.090683495654E-17)); +#24255 = VECTOR('',#24256,1.); +#24256 = DIRECTION('',(5.551115123126E-17,1.)); +#24257 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24258 = ADVANCED_FACE('',(#24259),#23703,.F.); +#24259 = FACE_BOUND('',#24260,.F.); +#24260 = EDGE_LOOP('',(#24261,#24262,#24289,#24309)); +#24261 = ORIENTED_EDGE('',*,*,#23764,.T.); +#24262 = ORIENTED_EDGE('',*,*,#24263,.T.); +#24263 = EDGE_CURVE('',#23740,#24264,#24266,.T.); +#24264 = VERTEX_POINT('',#24265); +#24265 = CARTESIAN_POINT('',(0.7425,-0.6,0.675)); +#24266 = SURFACE_CURVE('',#24267,(#24270,#24277),.PCURVE_S1.); +#24267 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#24268,#24269),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#24268 = CARTESIAN_POINT('',(0.755,-0.625,0.675)); +#24269 = CARTESIAN_POINT('',(0.7425,-0.6,0.675)); +#24270 = PCURVE('',#23703,#24271); +#24271 = DEFINITIONAL_REPRESENTATION('',(#24272),#24276); +#24272 = LINE('',#24273,#24274); +#24273 = CARTESIAN_POINT('',(0.134350288425,-2.457509225515E-15)); +#24274 = VECTOR('',#24275,1.); +#24275 = DIRECTION('',(-5.551115123126E-17,1.)); +#24276 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24277 = PCURVE('',#24278,#24283); +#24278 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#24279,#24280) + ,(#24281,#24282 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.51),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#24279 = CARTESIAN_POINT('',(0.755,-0.625,0.675)); +#24280 = CARTESIAN_POINT('',(0.7425,-0.6,0.675)); +#24281 = CARTESIAN_POINT('',(-0.755,-0.625,0.675)); +#24282 = CARTESIAN_POINT('',(-0.7425,-0.6,0.675)); +#24283 = DEFINITIONAL_REPRESENTATION('',(#24284),#24288); +#24284 = LINE('',#24285,#24286); +#24285 = CARTESIAN_POINT('',(1.630651267444E-16,-5.571489971276E-16)); +#24286 = VECTOR('',#24287,1.); +#24287 = DIRECTION('',(-3.655110206985E-16,1.)); +#24288 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24289 = ORIENTED_EDGE('',*,*,#24290,.F.); +#24290 = EDGE_CURVE('',#23689,#24264,#24291,.T.); +#24291 = SURFACE_CURVE('',#24292,(#24296,#24302),.PCURVE_S1.); +#24292 = LINE('',#24293,#24294); +#24293 = CARTESIAN_POINT('',(0.825,-0.5175,0.675)); +#24294 = VECTOR('',#24295,1.); +#24295 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#24296 = PCURVE('',#23703,#24297); +#24297 = DEFINITIONAL_REPRESENTATION('',(#24298),#24301); +#24298 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#24299,#24300),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,0.116672618896),.PIECEWISE_BEZIER_KNOTS.); +#24299 = CARTESIAN_POINT('',(-4.508493023755E-17,1.)); +#24300 = CARTESIAN_POINT('',(0.134350288425,1.)); +#24301 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24302 = PCURVE('',#24200,#24303); +#24303 = DEFINITIONAL_REPRESENTATION('',(#24304),#24308); +#24304 = LINE('',#24305,#24306); +#24305 = CARTESIAN_POINT('',(-1.121509151091E-16,4.009344429045E-18)); +#24306 = VECTOR('',#24307,1.); +#24307 = DIRECTION('',(1.,1.461346990312E-15)); +#24308 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24309 = ORIENTED_EDGE('',*,*,#23688,.F.); +#24310 = ADVANCED_FACE('',(#24311),#23753,.F.); +#24311 = FACE_BOUND('',#24312,.F.); +#24312 = EDGE_LOOP('',(#24313,#24314,#24334,#24355)); +#24313 = ORIENTED_EDGE('',*,*,#24022,.T.); +#24314 = ORIENTED_EDGE('',*,*,#24315,.T.); +#24315 = EDGE_CURVE('',#24001,#24316,#24318,.T.); +#24316 = VERTEX_POINT('',#24317); +#24317 = CARTESIAN_POINT('',(-0.755,-0.625,0.675)); +#24318 = SURFACE_CURVE('',#24319,(#24322,#24328),.PCURVE_S1.); +#24319 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#24320,#24321),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#24320 = CARTESIAN_POINT('',(-0.755,-0.625,0.525)); +#24321 = CARTESIAN_POINT('',(-0.755,-0.625,0.675)); +#24322 = PCURVE('',#23753,#24323); +#24323 = DEFINITIONAL_REPRESENTATION('',(#24324),#24327); +#24324 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#24325,#24326),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#24325 = CARTESIAN_POINT('',(1.51,-0.15)); +#24326 = CARTESIAN_POINT('',(1.51,0.)); +#24327 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24328 = PCURVE('',#24063,#24329); +#24329 = DEFINITIONAL_REPRESENTATION('',(#24330),#24333); +#24330 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#24331,#24332),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#24331 = CARTESIAN_POINT('',(0.,-0.15)); +#24332 = CARTESIAN_POINT('',(0.,0.)); +#24333 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24334 = ORIENTED_EDGE('',*,*,#24335,.F.); +#24335 = EDGE_CURVE('',#23740,#24316,#24336,.T.); +#24336 = SURFACE_CURVE('',#24337,(#24341,#24348),.PCURVE_S1.); +#24337 = LINE('',#24338,#24339); +#24338 = CARTESIAN_POINT('',(0.755,-0.625,0.675)); +#24339 = VECTOR('',#24340,1.); +#24340 = DIRECTION('',(-1.,0.,0.)); +#24341 = PCURVE('',#23753,#24342); +#24342 = DEFINITIONAL_REPRESENTATION('',(#24343),#24347); +#24343 = LINE('',#24344,#24345); +#24344 = CARTESIAN_POINT('',(0.,0.)); +#24345 = VECTOR('',#24346,1.); +#24346 = DIRECTION('',(1.,0.)); +#24347 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24348 = PCURVE('',#24278,#24349); +#24349 = DEFINITIONAL_REPRESENTATION('',(#24350),#24354); +#24350 = LINE('',#24351,#24352); +#24351 = CARTESIAN_POINT('',(1.630651267444E-16,-5.571489971276E-16)); +#24352 = VECTOR('',#24353,1.); +#24353 = DIRECTION('',(1.,3.446400363452E-18)); +#24354 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24355 = ORIENTED_EDGE('',*,*,#23739,.F.); +#24356 = ADVANCED_FACE('',(#24357),#23884,.F.); +#24357 = FACE_BOUND('',#24358,.F.); +#24358 = EDGE_LOOP('',(#24359,#24379,#24380,#24408)); +#24359 = ORIENTED_EDGE('',*,*,#24360,.F.); +#24360 = EDGE_CURVE('',#23869,#24361,#24363,.T.); +#24361 = VERTEX_POINT('',#24362); +#24362 = CARTESIAN_POINT('',(-0.85,-0.53,0.675)); +#24363 = SURFACE_CURVE('',#24364,(#24367,#24373),.PCURVE_S1.); +#24364 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#24365,#24366),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#24365 = CARTESIAN_POINT('',(-0.85,-0.53,0.525)); +#24366 = CARTESIAN_POINT('',(-0.85,-0.53,0.675)); +#24367 = PCURVE('',#23884,#24368); +#24368 = DEFINITIONAL_REPRESENTATION('',(#24369),#24372); +#24369 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#24370,#24371),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#24370 = CARTESIAN_POINT('',(0.,-0.15)); +#24371 = CARTESIAN_POINT('',(0.,0.)); +#24372 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24373 = PCURVE('',#24063,#24374); +#24374 = DEFINITIONAL_REPRESENTATION('',(#24375),#24378); +#24375 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#24376,#24377),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#24376 = CARTESIAN_POINT('',(0.134350288425,-0.15)); +#24377 = CARTESIAN_POINT('',(0.134350288425,0.)); +#24378 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24379 = ORIENTED_EDGE('',*,*,#23868,.T.); +#24380 = ORIENTED_EDGE('',*,*,#24381,.T.); +#24381 = EDGE_CURVE('',#23841,#24382,#24384,.T.); +#24382 = VERTEX_POINT('',#24383); +#24383 = CARTESIAN_POINT('',(-0.85,-0.175,0.675)); +#24384 = SURFACE_CURVE('',#24385,(#24389,#24396),.PCURVE_S1.); +#24385 = LINE('',#24386,#24387); +#24386 = CARTESIAN_POINT('',(-0.85,-0.175,0.498338171534)); +#24387 = VECTOR('',#24388,1.); +#24388 = DIRECTION('',(0.,0.,1.)); +#24389 = PCURVE('',#23884,#24390); +#24390 = DEFINITIONAL_REPRESENTATION('',(#24391),#24395); +#24391 = LINE('',#24392,#24393); +#24392 = CARTESIAN_POINT('',(0.355,-0.176661828466)); +#24393 = VECTOR('',#24394,1.); +#24394 = DIRECTION('',(0.,1.)); +#24395 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24396 = PCURVE('',#24397,#24402); +#24397 = PLANE('',#24398); +#24398 = AXIS2_PLACEMENT_3D('',#24399,#24400,#24401); +#24399 = CARTESIAN_POINT('',(-1.013084179351,-0.175,0.321676343068)); +#24400 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#24401 = DIRECTION('',(0.,-0.,1.)); +#24402 = DEFINITIONAL_REPRESENTATION('',(#24403),#24407); +#24403 = LINE('',#24404,#24405); +#24404 = CARTESIAN_POINT('',(0.176661828466,0.163084179351)); +#24405 = VECTOR('',#24406,1.); +#24406 = DIRECTION('',(1.,0.)); +#24407 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24408 = ORIENTED_EDGE('',*,*,#24409,.F.); +#24409 = EDGE_CURVE('',#24361,#24382,#24410,.T.); +#24410 = SURFACE_CURVE('',#24411,(#24415,#24422),.PCURVE_S1.); +#24411 = LINE('',#24412,#24413); +#24412 = CARTESIAN_POINT('',(-0.85,-0.53,0.675)); +#24413 = VECTOR('',#24414,1.); +#24414 = DIRECTION('',(0.,1.,0.)); +#24415 = PCURVE('',#23884,#24416); +#24416 = DEFINITIONAL_REPRESENTATION('',(#24417),#24421); +#24417 = LINE('',#24418,#24419); +#24418 = CARTESIAN_POINT('',(0.,0.)); +#24419 = VECTOR('',#24420,1.); +#24420 = DIRECTION('',(1.,0.)); +#24421 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24422 = PCURVE('',#24423,#24428); +#24423 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#24424,#24425) + ,(#24426,#24427 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.06),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#24424 = CARTESIAN_POINT('',(-0.85,-0.53,0.675)); +#24425 = CARTESIAN_POINT('',(-0.825,-0.5175,0.675)); +#24426 = CARTESIAN_POINT('',(-0.85,0.53,0.675)); +#24427 = CARTESIAN_POINT('',(-0.825,0.5175,0.675)); +#24428 = DEFINITIONAL_REPRESENTATION('',(#24429),#24433); +#24429 = LINE('',#24430,#24431); +#24430 = CARTESIAN_POINT('',(1.09742368264E-16,-2.75654855404E-16)); +#24431 = VECTOR('',#24432,1.); +#24432 = DIRECTION('',(1.,-1.397886106116E-14)); +#24433 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24434 = ADVANCED_FACE('',(#24435),#23828,.F.); +#24435 = FACE_BOUND('',#24436,.F.); +#24436 = EDGE_LOOP('',(#24437,#24465,#24466,#24486)); +#24437 = ORIENTED_EDGE('',*,*,#24438,.F.); +#24438 = EDGE_CURVE('',#23813,#24439,#24441,.T.); +#24439 = VERTEX_POINT('',#24440); +#24440 = CARTESIAN_POINT('',(-0.85,0.175,0.675)); +#24441 = SURFACE_CURVE('',#24442,(#24446,#24453),.PCURVE_S1.); +#24442 = LINE('',#24443,#24444); +#24443 = CARTESIAN_POINT('',(-0.85,0.175,0.498338171534)); +#24444 = VECTOR('',#24445,1.); +#24445 = DIRECTION('',(0.,0.,1.)); +#24446 = PCURVE('',#23828,#24447); +#24447 = DEFINITIONAL_REPRESENTATION('',(#24448),#24452); +#24448 = LINE('',#24449,#24450); +#24449 = CARTESIAN_POINT('',(0.705,-0.176661828466)); +#24450 = VECTOR('',#24451,1.); +#24451 = DIRECTION('',(0.,1.)); +#24452 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24453 = PCURVE('',#24454,#24459); +#24454 = PLANE('',#24455); +#24455 = AXIS2_PLACEMENT_3D('',#24456,#24457,#24458); +#24456 = CARTESIAN_POINT('',(-1.013084179351,0.175,0.321676343068)); +#24457 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#24458 = DIRECTION('',(0.,-0.,1.)); +#24459 = DEFINITIONAL_REPRESENTATION('',(#24460),#24464); +#24460 = LINE('',#24461,#24462); +#24461 = CARTESIAN_POINT('',(0.176661828466,0.163084179351)); +#24462 = VECTOR('',#24463,1.); +#24463 = DIRECTION('',(1.,0.)); +#24464 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24465 = ORIENTED_EDGE('',*,*,#23812,.T.); +#24466 = ORIENTED_EDGE('',*,*,#24467,.T.); +#24467 = EDGE_CURVE('',#23791,#24468,#24470,.T.); +#24468 = VERTEX_POINT('',#24469); +#24469 = CARTESIAN_POINT('',(-0.85,0.53,0.675)); +#24470 = SURFACE_CURVE('',#24471,(#24474,#24480),.PCURVE_S1.); +#24471 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#24472,#24473),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#24472 = CARTESIAN_POINT('',(-0.85,0.53,0.525)); +#24473 = CARTESIAN_POINT('',(-0.85,0.53,0.675)); +#24474 = PCURVE('',#23828,#24475); +#24475 = DEFINITIONAL_REPRESENTATION('',(#24476),#24479); +#24476 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#24477,#24478),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#24477 = CARTESIAN_POINT('',(1.06,-0.15)); +#24478 = CARTESIAN_POINT('',(1.06,0.)); +#24479 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24480 = PCURVE('',#23956,#24481); +#24481 = DEFINITIONAL_REPRESENTATION('',(#24482),#24485); +#24482 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#24483,#24484),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#24483 = CARTESIAN_POINT('',(0.,-0.15)); +#24484 = CARTESIAN_POINT('',(0.,0.)); +#24485 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24486 = ORIENTED_EDGE('',*,*,#24487,.F.); +#24487 = EDGE_CURVE('',#24439,#24468,#24488,.T.); +#24488 = SURFACE_CURVE('',#24489,(#24493,#24500),.PCURVE_S1.); +#24489 = LINE('',#24490,#24491); +#24490 = CARTESIAN_POINT('',(-0.85,-0.53,0.675)); +#24491 = VECTOR('',#24492,1.); +#24492 = DIRECTION('',(0.,1.,0.)); +#24493 = PCURVE('',#23828,#24494); +#24494 = DEFINITIONAL_REPRESENTATION('',(#24495),#24499); +#24495 = LINE('',#24496,#24497); +#24496 = CARTESIAN_POINT('',(0.,0.)); +#24497 = VECTOR('',#24498,1.); +#24498 = DIRECTION('',(1.,0.)); +#24499 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24500 = PCURVE('',#24501,#24506); +#24501 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#24502,#24503) + ,(#24504,#24505 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.06),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#24502 = CARTESIAN_POINT('',(-0.85,-0.53,0.675)); +#24503 = CARTESIAN_POINT('',(-0.825,-0.5175,0.675)); +#24504 = CARTESIAN_POINT('',(-0.85,0.53,0.675)); +#24505 = CARTESIAN_POINT('',(-0.825,0.5175,0.675)); +#24506 = DEFINITIONAL_REPRESENTATION('',(#24507),#24511); +#24507 = LINE('',#24508,#24509); +#24508 = CARTESIAN_POINT('',(0.,-6.496560674117E-17)); +#24509 = VECTOR('',#24510,1.); +#24510 = DIRECTION('',(1.,-1.03871327614E-15)); +#24511 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24512 = ADVANCED_FACE('',(#24513),#23856,.F.); +#24513 = FACE_BOUND('',#24514,.F.); +#24514 = EDGE_LOOP('',(#24515,#24516,#24544,#24572)); +#24515 = ORIENTED_EDGE('',*,*,#23840,.T.); +#24516 = ORIENTED_EDGE('',*,*,#24517,.T.); +#24517 = EDGE_CURVE('',#23813,#24518,#24520,.T.); +#24518 = VERTEX_POINT('',#24519); +#24519 = CARTESIAN_POINT('',(-0.92,0.175,0.455)); +#24520 = SURFACE_CURVE('',#24521,(#24526,#24533),.PCURVE_S1.); +#24521 = CIRCLE('',#24522,7.E-02); +#24522 = AXIS2_PLACEMENT_3D('',#24523,#24524,#24525); +#24523 = CARTESIAN_POINT('',(-0.85,0.175,0.455)); +#24524 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#24525 = DIRECTION('',(0.,0.,1.)); +#24526 = PCURVE('',#23856,#24527); +#24527 = DEFINITIONAL_REPRESENTATION('',(#24528),#24532); +#24528 = LINE('',#24529,#24530); +#24529 = CARTESIAN_POINT('',(0.,-0.35)); +#24530 = VECTOR('',#24531,1.); +#24531 = DIRECTION('',(1.,0.)); +#24532 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24533 = PCURVE('',#24454,#24534); +#24534 = DEFINITIONAL_REPRESENTATION('',(#24535),#24543); +#24535 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#24536,#24537,#24538,#24539 + ,#24540,#24541,#24542),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#24536 = CARTESIAN_POINT('',(0.203323656932,0.163084179351)); +#24537 = CARTESIAN_POINT('',(0.203323656932,4.184062282118E-02)); +#24538 = CARTESIAN_POINT('',(9.8323656932E-02,0.102462401086)); +#24539 = CARTESIAN_POINT('',(-6.676343068E-03,0.163084179351)); +#24540 = CARTESIAN_POINT('',(9.8323656932E-02,0.223705957616)); +#24541 = CARTESIAN_POINT('',(0.203323656932,0.284327735881)); +#24542 = CARTESIAN_POINT('',(0.203323656932,0.163084179351)); +#24543 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24544 = ORIENTED_EDGE('',*,*,#24545,.F.); +#24545 = EDGE_CURVE('',#24546,#24518,#24548,.T.); +#24546 = VERTEX_POINT('',#24547); +#24547 = CARTESIAN_POINT('',(-0.92,-0.175,0.455)); +#24548 = SURFACE_CURVE('',#24549,(#24553,#24560),.PCURVE_S1.); +#24549 = LINE('',#24550,#24551); +#24550 = CARTESIAN_POINT('',(-0.92,-0.175,0.455)); +#24551 = VECTOR('',#24552,1.); +#24552 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#24553 = PCURVE('',#23856,#24554); +#24554 = DEFINITIONAL_REPRESENTATION('',(#24555),#24559); +#24555 = LINE('',#24556,#24557); +#24556 = CARTESIAN_POINT('',(1.570796326795,2.775557561563E-17)); +#24557 = VECTOR('',#24558,1.); +#24558 = DIRECTION('',(0.,-1.)); +#24559 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24560 = PCURVE('',#24561,#24566); +#24561 = PLANE('',#24562); +#24562 = AXIS2_PLACEMENT_3D('',#24563,#24564,#24565); +#24563 = CARTESIAN_POINT('',(-0.92,-0.175,0.455)); +#24564 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#24565 = DIRECTION('',(0.,0.,-1.)); +#24566 = DEFINITIONAL_REPRESENTATION('',(#24567),#24571); +#24567 = LINE('',#24568,#24569); +#24568 = CARTESIAN_POINT('',(0.,-0.)); +#24569 = VECTOR('',#24570,1.); +#24570 = DIRECTION('',(0.,-1.)); +#24571 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24572 = ORIENTED_EDGE('',*,*,#24573,.F.); +#24573 = EDGE_CURVE('',#23841,#24546,#24574,.T.); +#24574 = SURFACE_CURVE('',#24575,(#24580,#24587),.PCURVE_S1.); +#24575 = CIRCLE('',#24576,7.E-02); +#24576 = AXIS2_PLACEMENT_3D('',#24577,#24578,#24579); +#24577 = CARTESIAN_POINT('',(-0.85,-0.175,0.455)); +#24578 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#24579 = DIRECTION('',(0.,0.,1.)); +#24580 = PCURVE('',#23856,#24581); +#24581 = DEFINITIONAL_REPRESENTATION('',(#24582),#24586); +#24582 = LINE('',#24583,#24584); +#24583 = CARTESIAN_POINT('',(0.,0.)); +#24584 = VECTOR('',#24585,1.); +#24585 = DIRECTION('',(1.,1.766974823035E-17)); +#24586 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24587 = PCURVE('',#24397,#24588); +#24588 = DEFINITIONAL_REPRESENTATION('',(#24589),#24597); +#24589 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#24590,#24591,#24592,#24593 + ,#24594,#24595,#24596),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#24590 = CARTESIAN_POINT('',(0.203323656932,0.163084179351)); +#24591 = CARTESIAN_POINT('',(0.203323656932,4.184062282118E-02)); +#24592 = CARTESIAN_POINT('',(9.8323656932E-02,0.102462401086)); +#24593 = CARTESIAN_POINT('',(-6.676343068E-03,0.163084179351)); +#24594 = CARTESIAN_POINT('',(9.8323656932E-02,0.223705957616)); +#24595 = CARTESIAN_POINT('',(0.203323656932,0.284327735881)); +#24596 = CARTESIAN_POINT('',(0.203323656932,0.163084179351)); +#24597 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24598 = ADVANCED_FACE('',(#24599),#23956,.F.); +#24599 = FACE_BOUND('',#24600,.F.); +#24600 = EDGE_LOOP('',(#24601,#24602,#24603,#24629)); +#24601 = ORIENTED_EDGE('',*,*,#23942,.T.); +#24602 = ORIENTED_EDGE('',*,*,#24161,.T.); +#24603 = ORIENTED_EDGE('',*,*,#24604,.F.); +#24604 = EDGE_CURVE('',#24468,#24139,#24605,.T.); +#24605 = SURFACE_CURVE('',#24606,(#24610,#24617),.PCURVE_S1.); +#24606 = LINE('',#24607,#24608); +#24607 = CARTESIAN_POINT('',(-0.85,0.53,0.675)); +#24608 = VECTOR('',#24609,1.); +#24609 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#24610 = PCURVE('',#23956,#24611); +#24611 = DEFINITIONAL_REPRESENTATION('',(#24612),#24616); +#24612 = LINE('',#24613,#24614); +#24613 = CARTESIAN_POINT('',(0.,0.)); +#24614 = VECTOR('',#24615,1.); +#24615 = DIRECTION('',(1.,0.)); +#24616 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24617 = PCURVE('',#24618,#24623); +#24618 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#24619,#24620) + ,(#24621,#24622 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#24619 = CARTESIAN_POINT('',(-0.85,0.53,0.675)); +#24620 = CARTESIAN_POINT('',(-0.825,0.5175,0.675)); +#24621 = CARTESIAN_POINT('',(-0.755,0.625,0.675)); +#24622 = CARTESIAN_POINT('',(-0.7425,0.6,0.675)); +#24623 = DEFINITIONAL_REPRESENTATION('',(#24624),#24628); +#24624 = LINE('',#24625,#24626); +#24625 = CARTESIAN_POINT('',(-3.973073758596E-17,4.485501618063E-16)); +#24626 = VECTOR('',#24627,1.); +#24627 = DIRECTION('',(1.,2.244230446166E-14)); +#24628 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24629 = ORIENTED_EDGE('',*,*,#24467,.F.); +#24630 = ADVANCED_FACE('',(#24631),#24063,.F.); +#24631 = FACE_BOUND('',#24632,.F.); +#24632 = EDGE_LOOP('',(#24633,#24634,#24635,#24661)); +#24633 = ORIENTED_EDGE('',*,*,#24049,.T.); +#24634 = ORIENTED_EDGE('',*,*,#24360,.T.); +#24635 = ORIENTED_EDGE('',*,*,#24636,.F.); +#24636 = EDGE_CURVE('',#24316,#24361,#24637,.T.); +#24637 = SURFACE_CURVE('',#24638,(#24642,#24649),.PCURVE_S1.); +#24638 = LINE('',#24639,#24640); +#24639 = CARTESIAN_POINT('',(-0.755,-0.625,0.675)); +#24640 = VECTOR('',#24641,1.); +#24641 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#24642 = PCURVE('',#24063,#24643); +#24643 = DEFINITIONAL_REPRESENTATION('',(#24644),#24648); +#24644 = LINE('',#24645,#24646); +#24645 = CARTESIAN_POINT('',(0.,0.)); +#24646 = VECTOR('',#24647,1.); +#24647 = DIRECTION('',(1.,0.)); +#24648 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24649 = PCURVE('',#24650,#24655); +#24650 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#24651,#24652) + ,(#24653,#24654 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.134350288425),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#24651 = CARTESIAN_POINT('',(-0.755,-0.625,0.675)); +#24652 = CARTESIAN_POINT('',(-0.7425,-0.6,0.675)); +#24653 = CARTESIAN_POINT('',(-0.85,-0.53,0.675)); +#24654 = CARTESIAN_POINT('',(-0.825,-0.5175,0.675)); +#24655 = DEFINITIONAL_REPRESENTATION('',(#24656),#24660); +#24656 = LINE('',#24657,#24658); +#24657 = CARTESIAN_POINT('',(-4.094030104823E-17,4.509354347099E-16)); +#24658 = VECTOR('',#24659,1.); +#24659 = DIRECTION('',(1.,-2.166355386428E-14)); +#24660 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24661 = ORIENTED_EDGE('',*,*,#24315,.F.); +#24662 = ADVANCED_FACE('',(#24663),#24096,.F.); +#24663 = FACE_BOUND('',#24664,.F.); +#24664 = EDGE_LOOP('',(#24665,#24666,#24667,#24689)); +#24665 = ORIENTED_EDGE('',*,*,#24081,.T.); +#24666 = ORIENTED_EDGE('',*,*,#24239,.T.); +#24667 = ORIENTED_EDGE('',*,*,#24668,.F.); +#24668 = EDGE_CURVE('',#24669,#24213,#24671,.T.); +#24669 = VERTEX_POINT('',#24670); +#24670 = CARTESIAN_POINT('',(0.712635072626,0.540270145251,1.1)); +#24671 = SURFACE_CURVE('',#24672,(#24676,#24682),.PCURVE_S1.); +#24672 = LINE('',#24673,#24674); +#24673 = CARTESIAN_POINT('',(0.712635072626,0.540270145251,1.1)); +#24674 = VECTOR('',#24675,1.); +#24675 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#24676 = PCURVE('',#24096,#24677); +#24677 = DEFINITIONAL_REPRESENTATION('',(#24678),#24681); +#24678 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#24679,#24680),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,7.443723356277E-02),.PIECEWISE_BEZIER_KNOTS.); +#24679 = CARTESIAN_POINT('',(2.328085100936E-16,1.)); +#24680 = CARTESIAN_POINT('',(0.116672618896,1.)); +#24681 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24682 = PCURVE('',#24227,#24683); +#24683 = DEFINITIONAL_REPRESENTATION('',(#24684),#24688); +#24684 = LINE('',#24685,#24686); +#24685 = CARTESIAN_POINT('',(1.798752737625,7.267433420327E-02)); +#24686 = VECTOR('',#24687,1.); +#24687 = DIRECTION('',(0.216345042339,-0.976316968333)); +#24688 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24689 = ORIENTED_EDGE('',*,*,#24690,.F.); +#24690 = EDGE_CURVE('',#24082,#24669,#24691,.T.); +#24691 = SURFACE_CURVE('',#24692,(#24695,#24702),.PCURVE_S1.); +#24692 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#24693,#24694),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#24693 = CARTESIAN_POINT('',(0.7425,0.6,0.675)); +#24694 = CARTESIAN_POINT('',(0.712635072626,0.540270145251,1.1)); +#24695 = PCURVE('',#24096,#24696); +#24696 = DEFINITIONAL_REPRESENTATION('',(#24697),#24701); +#24697 = LINE('',#24698,#24699); +#24698 = CARTESIAN_POINT('',(8.358145838124E-17,5.777391372306E-17)); +#24699 = VECTOR('',#24700,1.); +#24700 = DIRECTION('',(2.707081402921E-17,1.)); +#24701 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24702 = PCURVE('',#24703,#24708); +#24703 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#24704,#24705) + ,(#24706,#24707 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.485),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#24704 = CARTESIAN_POINT('',(-0.7425,0.6,0.675)); +#24705 = CARTESIAN_POINT('',(-0.712635072626,0.540270145251,1.1)); +#24706 = CARTESIAN_POINT('',(0.7425,0.6,0.675)); +#24707 = CARTESIAN_POINT('',(0.712635072626,0.540270145251,1.1)); +#24708 = DEFINITIONAL_REPRESENTATION('',(#24709),#24713); +#24709 = LINE('',#24710,#24711); +#24710 = CARTESIAN_POINT('',(1.485,1.216135738973E-16)); +#24711 = VECTOR('',#24712,1.); +#24712 = DIRECTION('',(4.440892098501E-16,1.)); +#24713 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24714 = ADVANCED_FACE('',(#24715),#24121,.F.); +#24715 = FACE_BOUND('',#24716,.F.); +#24716 = EDGE_LOOP('',(#24717,#24718,#24719,#24741)); +#24717 = ORIENTED_EDGE('',*,*,#24138,.T.); +#24718 = ORIENTED_EDGE('',*,*,#24108,.T.); +#24719 = ORIENTED_EDGE('',*,*,#24720,.F.); +#24720 = EDGE_CURVE('',#24721,#24082,#24723,.T.); +#24721 = VERTEX_POINT('',#24722); +#24722 = CARTESIAN_POINT('',(-0.7425,0.6,0.675)); +#24723 = SURFACE_CURVE('',#24724,(#24728,#24734),.PCURVE_S1.); +#24724 = LINE('',#24725,#24726); +#24725 = CARTESIAN_POINT('',(-0.7425,0.6,0.675)); +#24726 = VECTOR('',#24727,1.); +#24727 = DIRECTION('',(1.,0.,0.)); +#24728 = PCURVE('',#24121,#24729); +#24729 = DEFINITIONAL_REPRESENTATION('',(#24730),#24733); +#24730 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#24731,#24732),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.485),.PIECEWISE_BEZIER_KNOTS.); +#24731 = CARTESIAN_POINT('',(7.978251802972E-17,1.)); +#24732 = CARTESIAN_POINT('',(1.51,1.)); +#24733 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24734 = PCURVE('',#24703,#24735); +#24735 = DEFINITIONAL_REPRESENTATION('',(#24736),#24740); +#24736 = LINE('',#24737,#24738); +#24737 = CARTESIAN_POINT('',(2.151965084139E-17,1.036937452787E-16)); +#24738 = VECTOR('',#24739,1.); +#24739 = DIRECTION('',(1.,1.206722465894E-17)); +#24740 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24741 = ORIENTED_EDGE('',*,*,#24742,.F.); +#24742 = EDGE_CURVE('',#24139,#24721,#24743,.T.); +#24743 = SURFACE_CURVE('',#24744,(#24747,#24754),.PCURVE_S1.); +#24744 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#24745,#24746),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#24745 = CARTESIAN_POINT('',(-0.755,0.625,0.675)); +#24746 = CARTESIAN_POINT('',(-0.7425,0.6,0.675)); +#24747 = PCURVE('',#24121,#24748); +#24748 = DEFINITIONAL_REPRESENTATION('',(#24749),#24753); +#24749 = LINE('',#24750,#24751); +#24750 = CARTESIAN_POINT('',(1.630651267444E-16,-5.571489971276E-16)); +#24751 = VECTOR('',#24752,1.); +#24752 = DIRECTION('',(-3.655110206985E-16,1.)); +#24753 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24754 = PCURVE('',#24618,#24755); +#24755 = DEFINITIONAL_REPRESENTATION('',(#24756),#24760); +#24756 = LINE('',#24757,#24758); +#24757 = CARTESIAN_POINT('',(0.134350288425,-2.457509225515E-15)); +#24758 = VECTOR('',#24759,1.); +#24759 = DIRECTION('',(-5.551115123126E-17,1.)); +#24760 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24761 = ADVANCED_FACE('',(#24762,#24916),#24227,.T.); +#24762 = FACE_BOUND('',#24763,.T.); +#24763 = EDGE_LOOP('',(#24764,#24793,#24820,#24847,#24867,#24868,#24869, + #24891)); +#24764 = ORIENTED_EDGE('',*,*,#24765,.F.); +#24765 = EDGE_CURVE('',#24766,#24768,#24770,.T.); +#24766 = VERTEX_POINT('',#24767); +#24767 = CARTESIAN_POINT('',(-0.765270145251,-0.487635072626,1.1)); +#24768 = VERTEX_POINT('',#24769); +#24769 = CARTESIAN_POINT('',(-0.765270145251,0.487635072626,1.1)); +#24770 = SURFACE_CURVE('',#24771,(#24775,#24782),.PCURVE_S1.); +#24771 = LINE('',#24772,#24773); +#24772 = CARTESIAN_POINT('',(-0.765270145251,-0.487635072626,1.1)); +#24773 = VECTOR('',#24774,1.); +#24774 = DIRECTION('',(0.,1.,0.)); +#24775 = PCURVE('',#24227,#24776); +#24776 = DEFINITIONAL_REPRESENTATION('',(#24777),#24781); +#24777 = LINE('',#24778,#24779); +#24778 = CARTESIAN_POINT('',(0.,0.)); +#24779 = VECTOR('',#24780,1.); +#24780 = DIRECTION('',(0.537381302382,0.84333939541)); +#24781 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24782 = PCURVE('',#24783,#24788); +#24783 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#24784,#24785) + ,(#24786,#24787 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.035),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#24784 = CARTESIAN_POINT('',(-0.825,-0.5175,0.675)); +#24785 = CARTESIAN_POINT('',(-0.765270145251,-0.487635072626,1.1)); +#24786 = CARTESIAN_POINT('',(-0.825,0.5175,0.675)); +#24787 = CARTESIAN_POINT('',(-0.765270145251,0.487635072626,1.1)); +#24788 = DEFINITIONAL_REPRESENTATION('',(#24789),#24792); +#24789 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#24790,#24791),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,0.975270145252),.PIECEWISE_BEZIER_KNOTS.); +#24790 = CARTESIAN_POINT('',(-4.989202318042E-17,1.)); +#24791 = CARTESIAN_POINT('',(1.035,1.)); +#24792 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24793 = ORIENTED_EDGE('',*,*,#24794,.F.); +#24794 = EDGE_CURVE('',#24795,#24766,#24797,.T.); +#24795 = VERTEX_POINT('',#24796); +#24796 = CARTESIAN_POINT('',(-0.712635072626,-0.540270145251,1.1)); +#24797 = SURFACE_CURVE('',#24798,(#24802,#24809),.PCURVE_S1.); +#24798 = LINE('',#24799,#24800); +#24799 = CARTESIAN_POINT('',(-0.712635072626,-0.540270145251,1.1)); +#24800 = VECTOR('',#24801,1.); +#24801 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#24802 = PCURVE('',#24227,#24803); +#24803 = DEFINITIONAL_REPRESENTATION('',(#24804),#24808); +#24804 = LINE('',#24805,#24806); +#24805 = CARTESIAN_POINT('',(1.610412644673E-02,-7.267433420311E-02)); +#24806 = VECTOR('',#24807,1.); +#24807 = DIRECTION('',(-0.216345042339,0.976316968333)); +#24808 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24809 = PCURVE('',#24810,#24815); +#24810 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#24811,#24812) + ,(#24813,#24814 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#24811 = CARTESIAN_POINT('',(-0.7425,-0.6,0.675)); +#24812 = CARTESIAN_POINT('',(-0.712635072626,-0.540270145251,1.1)); +#24813 = CARTESIAN_POINT('',(-0.825,-0.5175,0.675)); +#24814 = CARTESIAN_POINT('',(-0.765270145251,-0.487635072626,1.1)); +#24815 = DEFINITIONAL_REPRESENTATION('',(#24816),#24819); +#24816 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#24817,#24818),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,7.443723356277E-02),.PIECEWISE_BEZIER_KNOTS.); +#24817 = CARTESIAN_POINT('',(2.328085100936E-16,1.)); +#24818 = CARTESIAN_POINT('',(0.116672618896,1.)); +#24819 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24820 = ORIENTED_EDGE('',*,*,#24821,.F.); +#24821 = EDGE_CURVE('',#24822,#24795,#24824,.T.); +#24822 = VERTEX_POINT('',#24823); +#24823 = CARTESIAN_POINT('',(0.712635072626,-0.540270145251,1.1)); +#24824 = SURFACE_CURVE('',#24825,(#24829,#24836),.PCURVE_S1.); +#24825 = LINE('',#24826,#24827); +#24826 = CARTESIAN_POINT('',(0.712635072626,-0.540270145251,1.1)); +#24827 = VECTOR('',#24828,1.); +#24828 = DIRECTION('',(-1.,0.,0.)); +#24829 = PCURVE('',#24227,#24830); +#24830 = DEFINITIONAL_REPRESENTATION('',(#24831),#24835); +#24831 = LINE('',#24832,#24833); +#24832 = CARTESIAN_POINT('',(1.218090589039,-0.838587861105)); +#24833 = VECTOR('',#24834,1.); +#24834 = DIRECTION('',(-0.84333939541,0.537381302382)); +#24835 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24836 = PCURVE('',#24837,#24842); +#24837 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#24838,#24839) + ,(#24840,#24841 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,1.485),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#24838 = CARTESIAN_POINT('',(0.7425,-0.6,0.675)); +#24839 = CARTESIAN_POINT('',(0.712635072626,-0.540270145251,1.1)); +#24840 = CARTESIAN_POINT('',(-0.7425,-0.6,0.675)); +#24841 = CARTESIAN_POINT('',(-0.712635072626,-0.540270145251,1.1)); +#24842 = DEFINITIONAL_REPRESENTATION('',(#24843),#24846); +#24843 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#24844,#24845),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.425270145252),.PIECEWISE_BEZIER_KNOTS.); +#24844 = CARTESIAN_POINT('',(1.840466191008E-16,1.)); +#24845 = CARTESIAN_POINT('',(1.485,1.)); +#24846 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24847 = ORIENTED_EDGE('',*,*,#24848,.F.); +#24848 = EDGE_CURVE('',#24186,#24822,#24849,.T.); +#24849 = SURFACE_CURVE('',#24850,(#24854,#24861),.PCURVE_S1.); +#24850 = LINE('',#24851,#24852); +#24851 = CARTESIAN_POINT('',(0.765270145251,-0.487635072626,1.1)); +#24852 = VECTOR('',#24853,1.); +#24853 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#24854 = PCURVE('',#24227,#24855); +#24855 = DEFINITIONAL_REPRESENTATION('',(#24856),#24860); +#24856 = LINE('',#24857,#24858); +#24857 = CARTESIAN_POINT('',(1.290764923242,-0.822483734658)); +#24858 = VECTOR('',#24859,1.); +#24859 = DIRECTION('',(-0.976316968333,-0.216345042339)); +#24860 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24861 = PCURVE('',#24200,#24862); +#24862 = DEFINITIONAL_REPRESENTATION('',(#24863),#24866); +#24863 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#24864,#24865),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,7.443723356277E-02),.PIECEWISE_BEZIER_KNOTS.); +#24864 = CARTESIAN_POINT('',(-1.70359649766E-16,1.)); +#24865 = CARTESIAN_POINT('',(0.116672618896,1.)); +#24866 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24867 = ORIENTED_EDGE('',*,*,#24212,.F.); +#24868 = ORIENTED_EDGE('',*,*,#24668,.F.); +#24869 = ORIENTED_EDGE('',*,*,#24870,.F.); +#24870 = EDGE_CURVE('',#24871,#24669,#24873,.T.); +#24871 = VERTEX_POINT('',#24872); +#24872 = CARTESIAN_POINT('',(-0.712635072626,0.540270145251,1.1)); +#24873 = SURFACE_CURVE('',#24874,(#24878,#24885),.PCURVE_S1.); +#24874 = LINE('',#24875,#24876); +#24875 = CARTESIAN_POINT('',(-0.712635072626,0.540270145251,1.1)); +#24876 = VECTOR('',#24877,1.); +#24877 = DIRECTION('',(1.,0.,0.)); +#24878 = PCURVE('',#24227,#24879); +#24879 = DEFINITIONAL_REPRESENTATION('',(#24880),#24884); +#24880 = LINE('',#24881,#24882); +#24881 = CARTESIAN_POINT('',(0.596766275033,0.838587861105)); +#24882 = VECTOR('',#24883,1.); +#24883 = DIRECTION('',(0.84333939541,-0.537381302382)); +#24884 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24885 = PCURVE('',#24703,#24886); +#24886 = DEFINITIONAL_REPRESENTATION('',(#24887),#24890); +#24887 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#24888,#24889),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.425270145252),.PIECEWISE_BEZIER_KNOTS.); +#24888 = CARTESIAN_POINT('',(1.840466191008E-16,1.)); +#24889 = CARTESIAN_POINT('',(1.485,1.)); +#24890 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24891 = ORIENTED_EDGE('',*,*,#24892,.F.); +#24892 = EDGE_CURVE('',#24768,#24871,#24893,.T.); +#24893 = SURFACE_CURVE('',#24894,(#24898,#24905),.PCURVE_S1.); +#24894 = LINE('',#24895,#24896); +#24895 = CARTESIAN_POINT('',(-0.765270145251,0.487635072626,1.1)); +#24896 = VECTOR('',#24897,1.); +#24897 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#24898 = PCURVE('',#24227,#24899); +#24899 = DEFINITIONAL_REPRESENTATION('',(#24900),#24904); +#24900 = LINE('',#24901,#24902); +#24901 = CARTESIAN_POINT('',(0.52409194083,0.822483734658)); +#24902 = VECTOR('',#24903,1.); +#24903 = DIRECTION('',(0.976316968333,0.216345042339)); +#24904 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24905 = PCURVE('',#24906,#24911); +#24906 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#24907,#24908) + ,(#24909,#24910 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.116672618896),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#24907 = CARTESIAN_POINT('',(-0.825,0.5175,0.675)); +#24908 = CARTESIAN_POINT('',(-0.765270145251,0.487635072626,1.1)); +#24909 = CARTESIAN_POINT('',(-0.7425,0.6,0.675)); +#24910 = CARTESIAN_POINT('',(-0.712635072626,0.540270145251,1.1)); +#24911 = DEFINITIONAL_REPRESENTATION('',(#24912),#24915); +#24912 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#24913,#24914),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,7.443723356277E-02),.PIECEWISE_BEZIER_KNOTS.); +#24913 = CARTESIAN_POINT('',(-1.70359649766E-16,1.)); +#24914 = CARTESIAN_POINT('',(0.116672618896,1.)); +#24915 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24916 = FACE_BOUND('',#24917,.T.); +#24917 = EDGE_LOOP('',(#24918,#24948,#24976,#25004)); +#24918 = ORIENTED_EDGE('',*,*,#24919,.T.); +#24919 = EDGE_CURVE('',#24920,#24922,#24924,.T.); +#24920 = VERTEX_POINT('',#24921); +#24921 = CARTESIAN_POINT('',(-0.315270145251,-0.490270145251,1.1)); +#24922 = VERTEX_POINT('',#24923); +#24923 = CARTESIAN_POINT('',(-0.715270145251,-0.490270145251,1.1)); +#24924 = SURFACE_CURVE('',#24925,(#24929,#24936),.PCURVE_S1.); +#24925 = LINE('',#24926,#24927); +#24926 = CARTESIAN_POINT('',(-0.740270145251,-0.490270145251,1.1)); +#24927 = VECTOR('',#24928,1.); +#24928 = DIRECTION('',(-1.,0.,0.)); +#24929 = PCURVE('',#24227,#24930); +#24930 = DEFINITIONAL_REPRESENTATION('',(#24931),#24935); +#24931 = LINE('',#24932,#24933); +#24932 = CARTESIAN_POINT('',(1.966744612615E-02,-1.565679311398E-02)); +#24933 = VECTOR('',#24934,1.); +#24934 = DIRECTION('',(-0.84333939541,0.537381302382)); +#24935 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24936 = PCURVE('',#24937,#24942); +#24937 = PLANE('',#24938); +#24938 = AXIS2_PLACEMENT_3D('',#24939,#24940,#24941); +#24939 = CARTESIAN_POINT('',(-0.715270145251,-0.490270145251,1.09)); +#24940 = DIRECTION('',(0.,1.,0.)); +#24941 = DIRECTION('',(0.,-0.,1.)); +#24942 = DEFINITIONAL_REPRESENTATION('',(#24943),#24947); +#24943 = LINE('',#24944,#24945); +#24944 = CARTESIAN_POINT('',(1.E-02,-2.5E-02)); +#24945 = VECTOR('',#24946,1.); +#24946 = DIRECTION('',(0.,-1.)); +#24947 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24948 = ORIENTED_EDGE('',*,*,#24949,.T.); +#24949 = EDGE_CURVE('',#24922,#24950,#24952,.T.); +#24950 = VERTEX_POINT('',#24951); +#24951 = CARTESIAN_POINT('',(-0.715270145251,0.490270145251,1.1)); +#24952 = SURFACE_CURVE('',#24953,(#24957,#24964),.PCURVE_S1.); +#24953 = LINE('',#24954,#24955); +#24954 = CARTESIAN_POINT('',(-0.715270145251,-0.488952608939,1.1)); +#24955 = VECTOR('',#24956,1.); +#24956 = DIRECTION('',(0.,1.,0.)); +#24957 = PCURVE('',#24227,#24958); +#24958 = DEFINITIONAL_REPRESENTATION('',(#24959),#24963); +#24959 = LINE('',#24960,#24961); +#24960 = CARTESIAN_POINT('',(4.145895039068E-02,-2.798019539673E-02)); +#24961 = VECTOR('',#24962,1.); +#24962 = DIRECTION('',(0.537381302382,0.84333939541)); +#24963 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24964 = PCURVE('',#24965,#24970); +#24965 = PLANE('',#24966); +#24966 = AXIS2_PLACEMENT_3D('',#24967,#24968,#24969); +#24967 = CARTESIAN_POINT('',(-0.715270145251,-0.490270145251,1.09)); +#24968 = DIRECTION('',(1.,0.,0.)); +#24969 = DIRECTION('',(0.,0.,1.)); +#24970 = DEFINITIONAL_REPRESENTATION('',(#24971),#24975); +#24971 = LINE('',#24972,#24973); +#24972 = CARTESIAN_POINT('',(1.E-02,-1.317536312E-03)); +#24973 = VECTOR('',#24974,1.); +#24974 = DIRECTION('',(0.,-1.)); +#24975 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24976 = ORIENTED_EDGE('',*,*,#24977,.F.); +#24977 = EDGE_CURVE('',#24978,#24950,#24980,.T.); +#24978 = VERTEX_POINT('',#24979); +#24979 = CARTESIAN_POINT('',(-0.315270145251,0.490270145251,1.1)); +#24980 = SURFACE_CURVE('',#24981,(#24985,#24992),.PCURVE_S1.); +#24981 = LINE('',#24982,#24983); +#24982 = CARTESIAN_POINT('',(-0.740270145251,0.490270145251,1.1)); +#24983 = VECTOR('',#24984,1.); +#24984 = DIRECTION('',(-1.,0.,0.)); +#24985 = PCURVE('',#24227,#24986); +#24986 = DEFINITIONAL_REPRESENTATION('',(#24987),#24991); +#24987 = LINE('',#24988,#24989); +#24988 = CARTESIAN_POINT('',(0.546591464474,0.811271462653)); +#24989 = VECTOR('',#24990,1.); +#24990 = DIRECTION('',(-0.84333939541,0.537381302382)); +#24991 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#24992 = PCURVE('',#24993,#24998); +#24993 = PLANE('',#24994); +#24994 = AXIS2_PLACEMENT_3D('',#24995,#24996,#24997); +#24995 = CARTESIAN_POINT('',(-0.715270145251,0.490270145251,1.09)); +#24996 = DIRECTION('',(0.,1.,0.)); +#24997 = DIRECTION('',(0.,-0.,1.)); +#24998 = DEFINITIONAL_REPRESENTATION('',(#24999),#25003); +#24999 = LINE('',#25000,#25001); +#25000 = CARTESIAN_POINT('',(1.E-02,-2.5E-02)); +#25001 = VECTOR('',#25002,1.); +#25002 = DIRECTION('',(0.,-1.)); +#25003 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25004 = ORIENTED_EDGE('',*,*,#25005,.F.); +#25005 = EDGE_CURVE('',#24920,#24978,#25006,.T.); +#25006 = SURFACE_CURVE('',#25007,(#25011,#25018),.PCURVE_S1.); +#25007 = LINE('',#25008,#25009); +#25008 = CARTESIAN_POINT('',(-0.315270145251,-0.488952608939,1.1)); +#25009 = VECTOR('',#25010,1.); +#25010 = DIRECTION('',(0.,1.,0.)); +#25011 = PCURVE('',#24227,#25012); +#25012 = DEFINITIONAL_REPRESENTATION('',(#25013),#25017); +#25013 = LINE('',#25014,#25015); +#25014 = CARTESIAN_POINT('',(0.378794708555,-0.24293271635)); +#25015 = VECTOR('',#25016,1.); +#25016 = DIRECTION('',(0.537381302382,0.84333939541)); +#25017 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25018 = PCURVE('',#25019,#25024); +#25019 = PLANE('',#25020); +#25020 = AXIS2_PLACEMENT_3D('',#25021,#25022,#25023); +#25021 = CARTESIAN_POINT('',(-0.315270145251,-0.490270145251,1.09)); +#25022 = DIRECTION('',(1.,0.,0.)); +#25023 = DIRECTION('',(0.,0.,1.)); +#25024 = DEFINITIONAL_REPRESENTATION('',(#25025),#25029); +#25025 = LINE('',#25026,#25027); +#25026 = CARTESIAN_POINT('',(1.E-02,-1.317536312E-03)); +#25027 = VECTOR('',#25028,1.); +#25028 = DIRECTION('',(0.,-1.)); +#25029 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25030 = ADVANCED_FACE('',(#25031),#24200,.F.); +#25031 = FACE_BOUND('',#25032,.F.); +#25032 = EDGE_LOOP('',(#25033,#25034,#25054,#25055)); +#25033 = ORIENTED_EDGE('',*,*,#24290,.T.); +#25034 = ORIENTED_EDGE('',*,*,#25035,.T.); +#25035 = EDGE_CURVE('',#24264,#24822,#25036,.T.); +#25036 = SURFACE_CURVE('',#25037,(#25040,#25047),.PCURVE_S1.); +#25037 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#25038,#25039),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#25038 = CARTESIAN_POINT('',(0.7425,-0.6,0.675)); +#25039 = CARTESIAN_POINT('',(0.712635072626,-0.540270145251,1.1)); +#25040 = PCURVE('',#24200,#25041); +#25041 = DEFINITIONAL_REPRESENTATION('',(#25042),#25046); +#25042 = LINE('',#25043,#25044); +#25043 = CARTESIAN_POINT('',(0.116672618896,-1.349148225495E-16)); +#25044 = VECTOR('',#25045,1.); +#25045 = DIRECTION('',(-8.326672684689E-17,1.)); +#25046 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25047 = PCURVE('',#24837,#25048); +#25048 = DEFINITIONAL_REPRESENTATION('',(#25049),#25053); +#25049 = LINE('',#25050,#25051); +#25050 = CARTESIAN_POINT('',(2.151965084139E-17,1.036937452787E-16)); +#25051 = VECTOR('',#25052,1.); +#25052 = DIRECTION('',(4.685197169399E-17,1.)); +#25053 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25054 = ORIENTED_EDGE('',*,*,#24848,.F.); +#25055 = ORIENTED_EDGE('',*,*,#24185,.F.); +#25056 = ADVANCED_FACE('',(#25057),#24278,.F.); +#25057 = FACE_BOUND('',#25058,.F.); +#25058 = EDGE_LOOP('',(#25059,#25060,#25082,#25102)); +#25059 = ORIENTED_EDGE('',*,*,#24335,.T.); +#25060 = ORIENTED_EDGE('',*,*,#25061,.T.); +#25061 = EDGE_CURVE('',#24316,#25062,#25064,.T.); +#25062 = VERTEX_POINT('',#25063); +#25063 = CARTESIAN_POINT('',(-0.7425,-0.6,0.675)); +#25064 = SURFACE_CURVE('',#25065,(#25068,#25075),.PCURVE_S1.); +#25065 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#25066,#25067),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#25066 = CARTESIAN_POINT('',(-0.755,-0.625,0.675)); +#25067 = CARTESIAN_POINT('',(-0.7425,-0.6,0.675)); +#25068 = PCURVE('',#24278,#25069); +#25069 = DEFINITIONAL_REPRESENTATION('',(#25070),#25074); +#25070 = LINE('',#25071,#25072); +#25071 = CARTESIAN_POINT('',(1.51,3.888947165922E-15)); +#25072 = VECTOR('',#25073,1.); +#25073 = DIRECTION('',(-2.22044604925E-16,1.)); +#25074 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25075 = PCURVE('',#24650,#25076); +#25076 = DEFINITIONAL_REPRESENTATION('',(#25077),#25081); +#25077 = LINE('',#25078,#25079); +#25078 = CARTESIAN_POINT('',(-4.094030104823E-17,4.509354347099E-16)); +#25079 = VECTOR('',#25080,1.); +#25080 = DIRECTION('',(1.029498081632E-16,1.)); +#25081 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25082 = ORIENTED_EDGE('',*,*,#25083,.F.); +#25083 = EDGE_CURVE('',#24264,#25062,#25084,.T.); +#25084 = SURFACE_CURVE('',#25085,(#25089,#25095),.PCURVE_S1.); +#25085 = LINE('',#25086,#25087); +#25086 = CARTESIAN_POINT('',(0.7425,-0.6,0.675)); +#25087 = VECTOR('',#25088,1.); +#25088 = DIRECTION('',(-1.,0.,0.)); +#25089 = PCURVE('',#24278,#25090); +#25090 = DEFINITIONAL_REPRESENTATION('',(#25091),#25094); +#25091 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#25092,#25093),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.485),.PIECEWISE_BEZIER_KNOTS.); +#25092 = CARTESIAN_POINT('',(7.978251802972E-17,1.)); +#25093 = CARTESIAN_POINT('',(1.51,1.)); +#25094 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25095 = PCURVE('',#24837,#25096); +#25096 = DEFINITIONAL_REPRESENTATION('',(#25097),#25101); +#25097 = LINE('',#25098,#25099); +#25098 = CARTESIAN_POINT('',(2.151965084139E-17,1.036937452787E-16)); +#25099 = VECTOR('',#25100,1.); +#25100 = DIRECTION('',(1.,1.206722465894E-17)); +#25101 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25102 = ORIENTED_EDGE('',*,*,#24263,.F.); +#25103 = ADVANCED_FACE('',(#25104),#24423,.F.); +#25104 = FACE_BOUND('',#25105,.F.); +#25105 = EDGE_LOOP('',(#25106,#25128,#25129,#25156)); +#25106 = ORIENTED_EDGE('',*,*,#25107,.F.); +#25107 = EDGE_CURVE('',#24361,#25108,#25110,.T.); +#25108 = VERTEX_POINT('',#25109); +#25109 = CARTESIAN_POINT('',(-0.825,-0.5175,0.675)); +#25110 = SURFACE_CURVE('',#25111,(#25114,#25121),.PCURVE_S1.); +#25111 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#25112,#25113),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#25112 = CARTESIAN_POINT('',(-0.85,-0.53,0.675)); +#25113 = CARTESIAN_POINT('',(-0.825,-0.5175,0.675)); +#25114 = PCURVE('',#24423,#25115); +#25115 = DEFINITIONAL_REPRESENTATION('',(#25116),#25120); +#25116 = LINE('',#25117,#25118); +#25117 = CARTESIAN_POINT('',(1.652535194953E-16,-4.716546953905E-15)); +#25118 = VECTOR('',#25119,1.); +#25119 = DIRECTION('',(-5.375542812107E-18,1.)); +#25120 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25121 = PCURVE('',#24650,#25122); +#25122 = DEFINITIONAL_REPRESENTATION('',(#25123),#25127); +#25123 = LINE('',#25124,#25125); +#25124 = CARTESIAN_POINT('',(0.134350288425,-2.459569275266E-15)); +#25125 = VECTOR('',#25126,1.); +#25126 = DIRECTION('',(2.775557561563E-17,1.)); +#25127 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25128 = ORIENTED_EDGE('',*,*,#24409,.T.); +#25129 = ORIENTED_EDGE('',*,*,#25130,.T.); +#25130 = EDGE_CURVE('',#24382,#25131,#25133,.T.); +#25131 = VERTEX_POINT('',#25132); +#25132 = CARTESIAN_POINT('',(-0.825,-0.175,0.675)); +#25133 = SURFACE_CURVE('',#25134,(#25138,#25144),.PCURVE_S1.); +#25134 = LINE('',#25135,#25136); +#25135 = CARTESIAN_POINT('',(-0.85,-0.175,0.675)); +#25136 = VECTOR('',#25137,1.); +#25137 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#25138 = PCURVE('',#24423,#25139); +#25139 = DEFINITIONAL_REPRESENTATION('',(#25140),#25143); +#25140 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#25141,#25142),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,2.5E-02),.PIECEWISE_BEZIER_KNOTS.); +#25141 = CARTESIAN_POINT('',(0.355,-7.972584336167E-16)); +#25142 = CARTESIAN_POINT('',(0.35077294686,1.)); +#25143 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25144 = PCURVE('',#25145,#25150); +#25145 = PLANE('',#25146); +#25146 = AXIS2_PLACEMENT_3D('',#25147,#25148,#25149); +#25147 = CARTESIAN_POINT('',(-0.85,-0.175,0.675)); +#25148 = DIRECTION('',(0.,0.,-1.)); +#25149 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#25150 = DEFINITIONAL_REPRESENTATION('',(#25151),#25155); +#25151 = LINE('',#25152,#25153); +#25152 = CARTESIAN_POINT('',(0.,-0.)); +#25153 = VECTOR('',#25154,1.); +#25154 = DIRECTION('',(1.,0.)); +#25155 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25156 = ORIENTED_EDGE('',*,*,#25157,.F.); +#25157 = EDGE_CURVE('',#25108,#25131,#25158,.T.); +#25158 = SURFACE_CURVE('',#25159,(#25163,#25169),.PCURVE_S1.); +#25159 = LINE('',#25160,#25161); +#25160 = CARTESIAN_POINT('',(-0.825,-0.5175,0.675)); +#25161 = VECTOR('',#25162,1.); +#25162 = DIRECTION('',(0.,1.,0.)); +#25163 = PCURVE('',#24423,#25164); +#25164 = DEFINITIONAL_REPRESENTATION('',(#25165),#25168); +#25165 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#25166,#25167),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,0.3425),.PIECEWISE_BEZIER_KNOTS.); +#25166 = CARTESIAN_POINT('',(1.598779766831E-16,1.)); +#25167 = CARTESIAN_POINT('',(0.35077294686,1.)); +#25168 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25169 = PCURVE('',#24783,#25170); +#25170 = DEFINITIONAL_REPRESENTATION('',(#25171),#25175); +#25171 = LINE('',#25172,#25173); +#25172 = CARTESIAN_POINT('',(3.416910704045E-17,1.389425750114E-16)); +#25173 = VECTOR('',#25174,1.); +#25174 = DIRECTION('',(1.,-5.524697804285E-16)); +#25175 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25176 = ADVANCED_FACE('',(#25177),#24397,.F.); +#25177 = FACE_BOUND('',#25178,.F.); +#25178 = EDGE_LOOP('',(#25179,#25180,#25181,#25204,#25233,#25261,#25289, + #25317,#25350,#25378)); +#25179 = ORIENTED_EDGE('',*,*,#24381,.F.); +#25180 = ORIENTED_EDGE('',*,*,#24573,.T.); +#25181 = ORIENTED_EDGE('',*,*,#25182,.T.); +#25182 = EDGE_CURVE('',#24546,#25183,#25185,.T.); +#25183 = VERTEX_POINT('',#25184); +#25184 = CARTESIAN_POINT('',(-0.92,-0.175,0.22)); +#25185 = SURFACE_CURVE('',#25186,(#25190,#25197),.PCURVE_S1.); +#25186 = LINE('',#25187,#25188); +#25187 = CARTESIAN_POINT('',(-0.92,-0.175,0.455)); +#25188 = VECTOR('',#25189,1.); +#25189 = DIRECTION('',(0.,0.,-1.)); +#25190 = PCURVE('',#24397,#25191); +#25191 = DEFINITIONAL_REPRESENTATION('',(#25192),#25196); +#25192 = LINE('',#25193,#25194); +#25193 = CARTESIAN_POINT('',(0.133323656932,9.3084179351E-02)); +#25194 = VECTOR('',#25195,1.); +#25195 = DIRECTION('',(-1.,0.)); +#25196 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25197 = PCURVE('',#24561,#25198); +#25198 = DEFINITIONAL_REPRESENTATION('',(#25199),#25203); +#25199 = LINE('',#25200,#25201); +#25200 = CARTESIAN_POINT('',(0.,-0.)); +#25201 = VECTOR('',#25202,1.); +#25202 = DIRECTION('',(1.,0.)); +#25203 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25204 = ORIENTED_EDGE('',*,*,#25205,.T.); +#25205 = EDGE_CURVE('',#25183,#25206,#25208,.T.); +#25206 = VERTEX_POINT('',#25207); +#25207 = CARTESIAN_POINT('',(-1.14,-0.175,0.)); +#25208 = SURFACE_CURVE('',#25209,(#25214,#25221),.PCURVE_S1.); +#25209 = CIRCLE('',#25210,0.22); +#25210 = AXIS2_PLACEMENT_3D('',#25211,#25212,#25213); +#25211 = CARTESIAN_POINT('',(-1.14,-0.175,0.22)); +#25212 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#25213 = DIRECTION('',(1.,-1.110223024625E-16,1.261617073438E-16)); +#25214 = PCURVE('',#24397,#25215); +#25215 = DEFINITIONAL_REPRESENTATION('',(#25216),#25220); +#25216 = CIRCLE('',#25217,0.22); +#25217 = AXIS2_PLACEMENT_2D('',#25218,#25219); +#25218 = CARTESIAN_POINT('',(-0.101676343068,-0.126915820649)); +#25219 = DIRECTION('',(1.261617073438E-16,1.)); +#25220 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25221 = PCURVE('',#25222,#25227); +#25222 = CYLINDRICAL_SURFACE('',#25223,0.22); +#25223 = AXIS2_PLACEMENT_3D('',#25224,#25225,#25226); +#25224 = CARTESIAN_POINT('',(-1.14,-0.175,0.22)); +#25225 = DIRECTION('',(-1.110223024625E-16,-1.,-0.)); +#25226 = DIRECTION('',(1.,-1.110223024625E-16,1.261617073438E-16)); +#25227 = DEFINITIONAL_REPRESENTATION('',(#25228),#25232); +#25228 = LINE('',#25229,#25230); +#25229 = CARTESIAN_POINT('',(6.28318530718,0.)); +#25230 = VECTOR('',#25231,1.); +#25231 = DIRECTION('',(-1.,0.)); +#25232 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25233 = ORIENTED_EDGE('',*,*,#25234,.T.); +#25234 = EDGE_CURVE('',#25206,#25235,#25237,.T.); +#25235 = VERTEX_POINT('',#25236); +#25236 = CARTESIAN_POINT('',(-1.25,-0.175,0.)); +#25237 = SURFACE_CURVE('',#25238,(#25242,#25249),.PCURVE_S1.); +#25238 = LINE('',#25239,#25240); +#25239 = CARTESIAN_POINT('',(-1.14,-0.175,0.)); +#25240 = VECTOR('',#25241,1.); +#25241 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#25242 = PCURVE('',#24397,#25243); +#25243 = DEFINITIONAL_REPRESENTATION('',(#25244),#25248); +#25244 = LINE('',#25245,#25246); +#25245 = CARTESIAN_POINT('',(-0.321676343068,-0.126915820649)); +#25246 = VECTOR('',#25247,1.); +#25247 = DIRECTION('',(0.,-1.)); +#25248 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25249 = PCURVE('',#25250,#25255); +#25250 = PLANE('',#25251); +#25251 = AXIS2_PLACEMENT_3D('',#25252,#25253,#25254); +#25252 = CARTESIAN_POINT('',(-1.14,-0.175,0.)); +#25253 = DIRECTION('',(0.,0.,1.)); +#25254 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#25255 = DEFINITIONAL_REPRESENTATION('',(#25256),#25260); +#25256 = LINE('',#25257,#25258); +#25257 = CARTESIAN_POINT('',(0.,0.)); +#25258 = VECTOR('',#25259,1.); +#25259 = DIRECTION('',(1.,0.)); +#25260 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25261 = ORIENTED_EDGE('',*,*,#25262,.T.); +#25262 = EDGE_CURVE('',#25235,#25263,#25265,.T.); +#25263 = VERTEX_POINT('',#25264); +#25264 = CARTESIAN_POINT('',(-1.25,-0.175,0.15)); +#25265 = SURFACE_CURVE('',#25266,(#25270,#25277),.PCURVE_S1.); +#25266 = LINE('',#25267,#25268); +#25267 = CARTESIAN_POINT('',(-1.25,-0.175,0.)); +#25268 = VECTOR('',#25269,1.); +#25269 = DIRECTION('',(0.,0.,1.)); +#25270 = PCURVE('',#24397,#25271); +#25271 = DEFINITIONAL_REPRESENTATION('',(#25272),#25276); +#25272 = LINE('',#25273,#25274); +#25273 = CARTESIAN_POINT('',(-0.321676343068,-0.236915820649)); +#25274 = VECTOR('',#25275,1.); +#25275 = DIRECTION('',(1.,0.)); +#25276 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25277 = PCURVE('',#25278,#25283); +#25278 = PLANE('',#25279); +#25279 = AXIS2_PLACEMENT_3D('',#25280,#25281,#25282); +#25280 = CARTESIAN_POINT('',(-1.25,-0.175,0.)); +#25281 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#25282 = DIRECTION('',(0.,0.,1.)); +#25283 = DEFINITIONAL_REPRESENTATION('',(#25284),#25288); +#25284 = LINE('',#25285,#25286); +#25285 = CARTESIAN_POINT('',(0.,0.)); +#25286 = VECTOR('',#25287,1.); +#25287 = DIRECTION('',(1.,0.)); +#25288 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25289 = ORIENTED_EDGE('',*,*,#25290,.T.); +#25290 = EDGE_CURVE('',#25263,#25291,#25293,.T.); +#25291 = VERTEX_POINT('',#25292); +#25292 = CARTESIAN_POINT('',(-1.14,-0.175,0.15)); +#25293 = SURFACE_CURVE('',#25294,(#25298,#25305),.PCURVE_S1.); +#25294 = LINE('',#25295,#25296); +#25295 = CARTESIAN_POINT('',(-1.25,-0.175,0.15)); +#25296 = VECTOR('',#25297,1.); +#25297 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#25298 = PCURVE('',#24397,#25299); +#25299 = DEFINITIONAL_REPRESENTATION('',(#25300),#25304); +#25300 = LINE('',#25301,#25302); +#25301 = CARTESIAN_POINT('',(-0.171676343068,-0.236915820649)); +#25302 = VECTOR('',#25303,1.); +#25303 = DIRECTION('',(0.,1.)); +#25304 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25305 = PCURVE('',#25306,#25311); +#25306 = PLANE('',#25307); +#25307 = AXIS2_PLACEMENT_3D('',#25308,#25309,#25310); +#25308 = CARTESIAN_POINT('',(-1.25,-0.175,0.15)); +#25309 = DIRECTION('',(0.,0.,-1.)); +#25310 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#25311 = DEFINITIONAL_REPRESENTATION('',(#25312),#25316); +#25312 = LINE('',#25313,#25314); +#25313 = CARTESIAN_POINT('',(0.,-0.)); +#25314 = VECTOR('',#25315,1.); +#25315 = DIRECTION('',(1.,0.)); +#25316 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25317 = ORIENTED_EDGE('',*,*,#25318,.T.); +#25318 = EDGE_CURVE('',#25291,#25319,#25321,.T.); +#25319 = VERTEX_POINT('',#25320); +#25320 = CARTESIAN_POINT('',(-1.07,-0.175,0.22)); +#25321 = SURFACE_CURVE('',#25322,(#25327,#25338),.PCURVE_S1.); +#25322 = CIRCLE('',#25323,7.E-02); +#25323 = AXIS2_PLACEMENT_3D('',#25324,#25325,#25326); +#25324 = CARTESIAN_POINT('',(-1.14,-0.175,0.22)); +#25325 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25326 = DIRECTION('',(1.586032892322E-15,-1.760850234868E-31,-1.)); +#25327 = PCURVE('',#24397,#25328); +#25328 = DEFINITIONAL_REPRESENTATION('',(#25329),#25337); +#25329 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#25330,#25331,#25332,#25333 + ,#25334,#25335,#25336),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#25330 = CARTESIAN_POINT('',(-0.171676343068,-0.126915820649)); +#25331 = CARTESIAN_POINT('',(-0.171676343068,-5.672264119178E-03)); +#25332 = CARTESIAN_POINT('',(-6.6676343068E-02,-6.629404238409E-02)); +#25333 = CARTESIAN_POINT('',(3.8323656932E-02,-0.126915820649)); +#25334 = CARTESIAN_POINT('',(-6.6676343068E-02,-0.187537598914)); +#25335 = CARTESIAN_POINT('',(-0.171676343068,-0.248159377179)); +#25336 = CARTESIAN_POINT('',(-0.171676343068,-0.126915820649)); +#25337 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25338 = PCURVE('',#25339,#25344); +#25339 = CYLINDRICAL_SURFACE('',#25340,7.E-02); +#25340 = AXIS2_PLACEMENT_3D('',#25341,#25342,#25343); +#25341 = CARTESIAN_POINT('',(-1.14,-0.175,0.22)); +#25342 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25343 = DIRECTION('',(1.586032892322E-15,-1.760850234868E-31,-1.)); +#25344 = DEFINITIONAL_REPRESENTATION('',(#25345),#25349); +#25345 = LINE('',#25346,#25347); +#25346 = CARTESIAN_POINT('',(0.,0.)); +#25347 = VECTOR('',#25348,1.); +#25348 = DIRECTION('',(1.,-1.766974823035E-17)); +#25349 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25350 = ORIENTED_EDGE('',*,*,#25351,.T.); +#25351 = EDGE_CURVE('',#25319,#25352,#25354,.T.); +#25352 = VERTEX_POINT('',#25353); +#25353 = CARTESIAN_POINT('',(-1.07,-0.175,0.455)); +#25354 = SURFACE_CURVE('',#25355,(#25359,#25366),.PCURVE_S1.); +#25355 = LINE('',#25356,#25357); +#25356 = CARTESIAN_POINT('',(-1.07,-0.175,0.22)); +#25357 = VECTOR('',#25358,1.); +#25358 = DIRECTION('',(0.,0.,1.)); +#25359 = PCURVE('',#24397,#25360); +#25360 = DEFINITIONAL_REPRESENTATION('',(#25361),#25365); +#25361 = LINE('',#25362,#25363); +#25362 = CARTESIAN_POINT('',(-0.101676343068,-5.6915820649E-02)); +#25363 = VECTOR('',#25364,1.); +#25364 = DIRECTION('',(1.,0.)); +#25365 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25366 = PCURVE('',#25367,#25372); +#25367 = PLANE('',#25368); +#25368 = AXIS2_PLACEMENT_3D('',#25369,#25370,#25371); +#25369 = CARTESIAN_POINT('',(-1.07,-0.175,0.22)); +#25370 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#25371 = DIRECTION('',(0.,0.,1.)); +#25372 = DEFINITIONAL_REPRESENTATION('',(#25373),#25377); +#25373 = LINE('',#25374,#25375); +#25374 = CARTESIAN_POINT('',(0.,0.)); +#25375 = VECTOR('',#25376,1.); +#25376 = DIRECTION('',(1.,0.)); +#25377 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25378 = ORIENTED_EDGE('',*,*,#25379,.T.); +#25379 = EDGE_CURVE('',#25352,#24382,#25380,.T.); +#25380 = SURFACE_CURVE('',#25381,(#25386,#25393),.PCURVE_S1.); +#25381 = CIRCLE('',#25382,0.22); +#25382 = AXIS2_PLACEMENT_3D('',#25383,#25384,#25385); +#25383 = CARTESIAN_POINT('',(-0.85,-0.175,0.455)); +#25384 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#25385 = DIRECTION('',(-1.,1.110223024625E-16,-7.569702440626E-16)); +#25386 = PCURVE('',#24397,#25387); +#25387 = DEFINITIONAL_REPRESENTATION('',(#25388),#25392); +#25388 = CIRCLE('',#25389,0.22); +#25389 = AXIS2_PLACEMENT_2D('',#25390,#25391); +#25390 = CARTESIAN_POINT('',(0.133323656932,0.163084179351)); +#25391 = DIRECTION('',(-7.569702440626E-16,-1.)); +#25392 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25393 = PCURVE('',#25394,#25399); +#25394 = CYLINDRICAL_SURFACE('',#25395,0.22); +#25395 = AXIS2_PLACEMENT_3D('',#25396,#25397,#25398); +#25396 = CARTESIAN_POINT('',(-0.85,-0.175,0.455)); +#25397 = DIRECTION('',(-1.110223024625E-16,-1.,-0.)); +#25398 = DIRECTION('',(-1.,1.110223024625E-16,-7.569702440626E-16)); +#25399 = DEFINITIONAL_REPRESENTATION('',(#25400),#25404); +#25400 = LINE('',#25401,#25402); +#25401 = CARTESIAN_POINT('',(6.28318530718,0.)); +#25402 = VECTOR('',#25403,1.); +#25403 = DIRECTION('',(-1.,0.)); +#25404 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25405 = ADVANCED_FACE('',(#25406),#24454,.T.); +#25406 = FACE_BOUND('',#25407,.T.); +#25407 = EDGE_LOOP('',(#25408,#25409,#25410,#25433,#25457,#25480,#25503, + #25526,#25554,#25577)); +#25408 = ORIENTED_EDGE('',*,*,#24438,.F.); +#25409 = ORIENTED_EDGE('',*,*,#24517,.T.); +#25410 = ORIENTED_EDGE('',*,*,#25411,.T.); +#25411 = EDGE_CURVE('',#24518,#25412,#25414,.T.); +#25412 = VERTEX_POINT('',#25413); +#25413 = CARTESIAN_POINT('',(-0.92,0.175,0.22)); +#25414 = SURFACE_CURVE('',#25415,(#25419,#25426),.PCURVE_S1.); +#25415 = LINE('',#25416,#25417); +#25416 = CARTESIAN_POINT('',(-0.92,0.175,0.455)); +#25417 = VECTOR('',#25418,1.); +#25418 = DIRECTION('',(0.,0.,-1.)); +#25419 = PCURVE('',#24454,#25420); +#25420 = DEFINITIONAL_REPRESENTATION('',(#25421),#25425); +#25421 = LINE('',#25422,#25423); +#25422 = CARTESIAN_POINT('',(0.133323656932,9.3084179351E-02)); +#25423 = VECTOR('',#25424,1.); +#25424 = DIRECTION('',(-1.,0.)); +#25425 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25426 = PCURVE('',#24561,#25427); +#25427 = DEFINITIONAL_REPRESENTATION('',(#25428),#25432); +#25428 = LINE('',#25429,#25430); +#25429 = CARTESIAN_POINT('',(0.,-0.35)); +#25430 = VECTOR('',#25431,1.); +#25431 = DIRECTION('',(1.,0.)); +#25432 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25433 = ORIENTED_EDGE('',*,*,#25434,.T.); +#25434 = EDGE_CURVE('',#25412,#25435,#25437,.T.); +#25435 = VERTEX_POINT('',#25436); +#25436 = CARTESIAN_POINT('',(-1.14,0.175,0.)); +#25437 = SURFACE_CURVE('',#25438,(#25443,#25450),.PCURVE_S1.); +#25438 = CIRCLE('',#25439,0.22); +#25439 = AXIS2_PLACEMENT_3D('',#25440,#25441,#25442); +#25440 = CARTESIAN_POINT('',(-1.14,0.175,0.22)); +#25441 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#25442 = DIRECTION('',(1.,-1.110223024625E-16,1.261617073438E-16)); +#25443 = PCURVE('',#24454,#25444); +#25444 = DEFINITIONAL_REPRESENTATION('',(#25445),#25449); +#25445 = CIRCLE('',#25446,0.22); +#25446 = AXIS2_PLACEMENT_2D('',#25447,#25448); +#25447 = CARTESIAN_POINT('',(-0.101676343068,-0.126915820649)); +#25448 = DIRECTION('',(1.261617073438E-16,1.)); +#25449 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25450 = PCURVE('',#25222,#25451); +#25451 = DEFINITIONAL_REPRESENTATION('',(#25452),#25456); +#25452 = LINE('',#25453,#25454); +#25453 = CARTESIAN_POINT('',(6.28318530718,-0.35)); +#25454 = VECTOR('',#25455,1.); +#25455 = DIRECTION('',(-1.,0.)); +#25456 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25457 = ORIENTED_EDGE('',*,*,#25458,.T.); +#25458 = EDGE_CURVE('',#25435,#25459,#25461,.T.); +#25459 = VERTEX_POINT('',#25460); +#25460 = CARTESIAN_POINT('',(-1.25,0.175,0.)); +#25461 = SURFACE_CURVE('',#25462,(#25466,#25473),.PCURVE_S1.); +#25462 = LINE('',#25463,#25464); +#25463 = CARTESIAN_POINT('',(-1.14,0.175,0.)); +#25464 = VECTOR('',#25465,1.); +#25465 = DIRECTION('',(-1.,1.110223024625E-16,0.)); +#25466 = PCURVE('',#24454,#25467); +#25467 = DEFINITIONAL_REPRESENTATION('',(#25468),#25472); +#25468 = LINE('',#25469,#25470); +#25469 = CARTESIAN_POINT('',(-0.321676343068,-0.126915820649)); +#25470 = VECTOR('',#25471,1.); +#25471 = DIRECTION('',(0.,-1.)); +#25472 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25473 = PCURVE('',#25250,#25474); +#25474 = DEFINITIONAL_REPRESENTATION('',(#25475),#25479); +#25475 = LINE('',#25476,#25477); +#25476 = CARTESIAN_POINT('',(3.885780586187E-17,-0.35)); +#25477 = VECTOR('',#25478,1.); +#25478 = DIRECTION('',(1.,0.)); +#25479 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25480 = ORIENTED_EDGE('',*,*,#25481,.T.); +#25481 = EDGE_CURVE('',#25459,#25482,#25484,.T.); +#25482 = VERTEX_POINT('',#25483); +#25483 = CARTESIAN_POINT('',(-1.25,0.175,0.15)); +#25484 = SURFACE_CURVE('',#25485,(#25489,#25496),.PCURVE_S1.); +#25485 = LINE('',#25486,#25487); +#25486 = CARTESIAN_POINT('',(-1.25,0.175,0.)); +#25487 = VECTOR('',#25488,1.); +#25488 = DIRECTION('',(0.,0.,1.)); +#25489 = PCURVE('',#24454,#25490); +#25490 = DEFINITIONAL_REPRESENTATION('',(#25491),#25495); +#25491 = LINE('',#25492,#25493); +#25492 = CARTESIAN_POINT('',(-0.321676343068,-0.236915820649)); +#25493 = VECTOR('',#25494,1.); +#25494 = DIRECTION('',(1.,0.)); +#25495 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25496 = PCURVE('',#25278,#25497); +#25497 = DEFINITIONAL_REPRESENTATION('',(#25498),#25502); +#25498 = LINE('',#25499,#25500); +#25499 = CARTESIAN_POINT('',(0.,-0.35)); +#25500 = VECTOR('',#25501,1.); +#25501 = DIRECTION('',(1.,0.)); +#25502 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25503 = ORIENTED_EDGE('',*,*,#25504,.T.); +#25504 = EDGE_CURVE('',#25482,#25505,#25507,.T.); +#25505 = VERTEX_POINT('',#25506); +#25506 = CARTESIAN_POINT('',(-1.14,0.175,0.15)); +#25507 = SURFACE_CURVE('',#25508,(#25512,#25519),.PCURVE_S1.); +#25508 = LINE('',#25509,#25510); +#25509 = CARTESIAN_POINT('',(-1.25,0.175,0.15)); +#25510 = VECTOR('',#25511,1.); +#25511 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#25512 = PCURVE('',#24454,#25513); +#25513 = DEFINITIONAL_REPRESENTATION('',(#25514),#25518); +#25514 = LINE('',#25515,#25516); +#25515 = CARTESIAN_POINT('',(-0.171676343068,-0.236915820649)); +#25516 = VECTOR('',#25517,1.); +#25517 = DIRECTION('',(0.,1.)); +#25518 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25519 = PCURVE('',#25306,#25520); +#25520 = DEFINITIONAL_REPRESENTATION('',(#25521),#25525); +#25521 = LINE('',#25522,#25523); +#25522 = CARTESIAN_POINT('',(-3.885780586187E-17,-0.35)); +#25523 = VECTOR('',#25524,1.); +#25524 = DIRECTION('',(1.,0.)); +#25525 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25526 = ORIENTED_EDGE('',*,*,#25527,.T.); +#25527 = EDGE_CURVE('',#25505,#25528,#25530,.T.); +#25528 = VERTEX_POINT('',#25529); +#25529 = CARTESIAN_POINT('',(-1.07,0.175,0.22)); +#25530 = SURFACE_CURVE('',#25531,(#25536,#25547),.PCURVE_S1.); +#25531 = CIRCLE('',#25532,7.E-02); +#25532 = AXIS2_PLACEMENT_3D('',#25533,#25534,#25535); +#25533 = CARTESIAN_POINT('',(-1.14,0.175,0.22)); +#25534 = DIRECTION('',(-1.110223024625E-16,-1.,0.)); +#25535 = DIRECTION('',(1.586032892322E-15,-1.760850234868E-31,-1.)); +#25536 = PCURVE('',#24454,#25537); +#25537 = DEFINITIONAL_REPRESENTATION('',(#25538),#25546); +#25538 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#25539,#25540,#25541,#25542 + ,#25543,#25544,#25545),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#25539 = CARTESIAN_POINT('',(-0.171676343068,-0.126915820649)); +#25540 = CARTESIAN_POINT('',(-0.171676343068,-5.672264119178E-03)); +#25541 = CARTESIAN_POINT('',(-6.6676343068E-02,-6.629404238409E-02)); +#25542 = CARTESIAN_POINT('',(3.8323656932E-02,-0.126915820649)); +#25543 = CARTESIAN_POINT('',(-6.6676343068E-02,-0.187537598914)); +#25544 = CARTESIAN_POINT('',(-0.171676343068,-0.248159377179)); +#25545 = CARTESIAN_POINT('',(-0.171676343068,-0.126915820649)); +#25546 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25547 = PCURVE('',#25339,#25548); +#25548 = DEFINITIONAL_REPRESENTATION('',(#25549),#25553); +#25549 = LINE('',#25550,#25551); +#25550 = CARTESIAN_POINT('',(0.,-0.35)); +#25551 = VECTOR('',#25552,1.); +#25552 = DIRECTION('',(1.,0.)); +#25553 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25554 = ORIENTED_EDGE('',*,*,#25555,.T.); +#25555 = EDGE_CURVE('',#25528,#25556,#25558,.T.); +#25556 = VERTEX_POINT('',#25557); +#25557 = CARTESIAN_POINT('',(-1.07,0.175,0.455)); +#25558 = SURFACE_CURVE('',#25559,(#25563,#25570),.PCURVE_S1.); +#25559 = LINE('',#25560,#25561); +#25560 = CARTESIAN_POINT('',(-1.07,0.175,0.22)); +#25561 = VECTOR('',#25562,1.); +#25562 = DIRECTION('',(0.,0.,1.)); +#25563 = PCURVE('',#24454,#25564); +#25564 = DEFINITIONAL_REPRESENTATION('',(#25565),#25569); +#25565 = LINE('',#25566,#25567); +#25566 = CARTESIAN_POINT('',(-0.101676343068,-5.6915820649E-02)); +#25567 = VECTOR('',#25568,1.); +#25568 = DIRECTION('',(1.,0.)); +#25569 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25570 = PCURVE('',#25367,#25571); +#25571 = DEFINITIONAL_REPRESENTATION('',(#25572),#25576); +#25572 = LINE('',#25573,#25574); +#25573 = CARTESIAN_POINT('',(0.,-0.35)); +#25574 = VECTOR('',#25575,1.); +#25575 = DIRECTION('',(1.,0.)); +#25576 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25577 = ORIENTED_EDGE('',*,*,#25578,.T.); +#25578 = EDGE_CURVE('',#25556,#24439,#25579,.T.); +#25579 = SURFACE_CURVE('',#25580,(#25585,#25592),.PCURVE_S1.); +#25580 = CIRCLE('',#25581,0.22); +#25581 = AXIS2_PLACEMENT_3D('',#25582,#25583,#25584); +#25582 = CARTESIAN_POINT('',(-0.85,0.175,0.455)); +#25583 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#25584 = DIRECTION('',(-1.,1.110223024625E-16,-7.569702440626E-16)); +#25585 = PCURVE('',#24454,#25586); +#25586 = DEFINITIONAL_REPRESENTATION('',(#25587),#25591); +#25587 = CIRCLE('',#25588,0.22); +#25588 = AXIS2_PLACEMENT_2D('',#25589,#25590); +#25589 = CARTESIAN_POINT('',(0.133323656932,0.163084179351)); +#25590 = DIRECTION('',(-7.569702440626E-16,-1.)); +#25591 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25592 = PCURVE('',#25394,#25593); +#25593 = DEFINITIONAL_REPRESENTATION('',(#25594),#25598); +#25594 = LINE('',#25595,#25596); +#25595 = CARTESIAN_POINT('',(6.28318530718,-0.35)); +#25596 = VECTOR('',#25597,1.); +#25597 = DIRECTION('',(-1.,0.)); +#25598 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25599 = ADVANCED_FACE('',(#25600),#24501,.F.); +#25600 = FACE_BOUND('',#25601,.F.); +#25601 = EDGE_LOOP('',(#25602,#25624,#25625,#25647)); +#25602 = ORIENTED_EDGE('',*,*,#25603,.F.); +#25603 = EDGE_CURVE('',#24439,#25604,#25606,.T.); +#25604 = VERTEX_POINT('',#25605); +#25605 = CARTESIAN_POINT('',(-0.825,0.175,0.675)); +#25606 = SURFACE_CURVE('',#25607,(#25611,#25617),.PCURVE_S1.); +#25607 = LINE('',#25608,#25609); +#25608 = CARTESIAN_POINT('',(-0.85,0.175,0.675)); +#25609 = VECTOR('',#25610,1.); +#25610 = DIRECTION('',(1.,-1.110223024625E-16,0.)); +#25611 = PCURVE('',#24501,#25612); +#25612 = DEFINITIONAL_REPRESENTATION('',(#25613),#25616); +#25613 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#25614,#25615),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,2.5E-02),.PIECEWISE_BEZIER_KNOTS.); +#25614 = CARTESIAN_POINT('',(0.705,-5.23815056492E-15)); +#25615 = CARTESIAN_POINT('',(0.70922705314,1.)); +#25616 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25617 = PCURVE('',#25145,#25618); +#25618 = DEFINITIONAL_REPRESENTATION('',(#25619),#25623); +#25619 = LINE('',#25620,#25621); +#25620 = CARTESIAN_POINT('',(-3.885780586187E-17,-0.35)); +#25621 = VECTOR('',#25622,1.); +#25622 = DIRECTION('',(1.,0.)); +#25623 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25624 = ORIENTED_EDGE('',*,*,#24487,.T.); +#25625 = ORIENTED_EDGE('',*,*,#25626,.T.); +#25626 = EDGE_CURVE('',#24468,#25627,#25629,.T.); +#25627 = VERTEX_POINT('',#25628); +#25628 = CARTESIAN_POINT('',(-0.825,0.5175,0.675)); +#25629 = SURFACE_CURVE('',#25630,(#25633,#25640),.PCURVE_S1.); +#25630 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#25631,#25632),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#25631 = CARTESIAN_POINT('',(-0.85,0.53,0.675)); +#25632 = CARTESIAN_POINT('',(-0.825,0.5175,0.675)); +#25633 = PCURVE('',#24501,#25634); +#25634 = DEFINITIONAL_REPRESENTATION('',(#25635),#25639); +#25635 = LINE('',#25636,#25637); +#25636 = CARTESIAN_POINT('',(1.06,-1.166001679449E-15)); +#25637 = VECTOR('',#25638,1.); +#25638 = DIRECTION('',(2.22044604925E-16,1.)); +#25639 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25640 = PCURVE('',#24618,#25641); +#25641 = DEFINITIONAL_REPRESENTATION('',(#25642),#25646); +#25642 = LINE('',#25643,#25644); +#25643 = CARTESIAN_POINT('',(-3.973073758596E-17,4.485501618063E-16)); +#25644 = VECTOR('',#25645,1.); +#25645 = DIRECTION('',(-5.354192651592E-18,1.)); +#25646 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25647 = ORIENTED_EDGE('',*,*,#25648,.F.); +#25648 = EDGE_CURVE('',#25604,#25627,#25649,.T.); +#25649 = SURFACE_CURVE('',#25650,(#25654,#25660),.PCURVE_S1.); +#25650 = LINE('',#25651,#25652); +#25651 = CARTESIAN_POINT('',(-0.825,-0.5175,0.675)); +#25652 = VECTOR('',#25653,1.); +#25653 = DIRECTION('',(0.,1.,0.)); +#25654 = PCURVE('',#24501,#25655); +#25655 = DEFINITIONAL_REPRESENTATION('',(#25656),#25659); +#25656 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#25657,#25658),.UNSPECIFIED., + .F.,.F.,(2,2),(0.6925,1.035),.PIECEWISE_BEZIER_KNOTS.); +#25657 = CARTESIAN_POINT('',(0.70922705314,1.)); +#25658 = CARTESIAN_POINT('',(1.06,1.)); +#25659 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25660 = PCURVE('',#24783,#25661); +#25661 = DEFINITIONAL_REPRESENTATION('',(#25662),#25666); +#25662 = LINE('',#25663,#25664); +#25663 = CARTESIAN_POINT('',(0.,-8.950037803615E-17)); +#25664 = VECTOR('',#25665,1.); +#25665 = DIRECTION('',(1.,7.589565458417E-17)); +#25666 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25667 = ADVANCED_FACE('',(#25668),#24561,.F.); +#25668 = FACE_BOUND('',#25669,.F.); +#25669 = EDGE_LOOP('',(#25670,#25671,#25672,#25693)); +#25670 = ORIENTED_EDGE('',*,*,#24545,.T.); +#25671 = ORIENTED_EDGE('',*,*,#25411,.T.); +#25672 = ORIENTED_EDGE('',*,*,#25673,.F.); +#25673 = EDGE_CURVE('',#25183,#25412,#25674,.T.); +#25674 = SURFACE_CURVE('',#25675,(#25679,#25686),.PCURVE_S1.); +#25675 = LINE('',#25676,#25677); +#25676 = CARTESIAN_POINT('',(-0.92,-0.175,0.22)); +#25677 = VECTOR('',#25678,1.); +#25678 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#25679 = PCURVE('',#24561,#25680); +#25680 = DEFINITIONAL_REPRESENTATION('',(#25681),#25685); +#25681 = LINE('',#25682,#25683); +#25682 = CARTESIAN_POINT('',(0.235,0.)); +#25683 = VECTOR('',#25684,1.); +#25684 = DIRECTION('',(0.,-1.)); +#25685 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25686 = PCURVE('',#25222,#25687); +#25687 = DEFINITIONAL_REPRESENTATION('',(#25688),#25692); +#25688 = LINE('',#25689,#25690); +#25689 = CARTESIAN_POINT('',(6.28318530718,-2.775557561563E-17)); +#25690 = VECTOR('',#25691,1.); +#25691 = DIRECTION('',(0.,-1.)); +#25692 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25693 = ORIENTED_EDGE('',*,*,#25182,.F.); +#25694 = ADVANCED_FACE('',(#25695),#24618,.F.); +#25695 = FACE_BOUND('',#25696,.F.); +#25696 = EDGE_LOOP('',(#25697,#25698,#25699,#25719)); +#25697 = ORIENTED_EDGE('',*,*,#24604,.T.); +#25698 = ORIENTED_EDGE('',*,*,#24742,.T.); +#25699 = ORIENTED_EDGE('',*,*,#25700,.F.); +#25700 = EDGE_CURVE('',#25627,#24721,#25701,.T.); +#25701 = SURFACE_CURVE('',#25702,(#25706,#25712),.PCURVE_S1.); +#25702 = LINE('',#25703,#25704); +#25703 = CARTESIAN_POINT('',(-0.825,0.5175,0.675)); +#25704 = VECTOR('',#25705,1.); +#25705 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#25706 = PCURVE('',#24618,#25707); +#25707 = DEFINITIONAL_REPRESENTATION('',(#25708),#25711); +#25708 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#25709,#25710),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,0.116672618896),.PIECEWISE_BEZIER_KNOTS.); +#25709 = CARTESIAN_POINT('',(-4.508493023755E-17,1.)); +#25710 = CARTESIAN_POINT('',(0.134350288425,1.)); +#25711 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25712 = PCURVE('',#24906,#25713); +#25713 = DEFINITIONAL_REPRESENTATION('',(#25714),#25718); +#25714 = LINE('',#25715,#25716); +#25715 = CARTESIAN_POINT('',(-1.121509151091E-16,4.009344429045E-18)); +#25716 = VECTOR('',#25717,1.); +#25717 = DIRECTION('',(1.,1.461346990312E-15)); +#25718 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25719 = ORIENTED_EDGE('',*,*,#25626,.F.); +#25720 = ADVANCED_FACE('',(#25721),#24650,.F.); +#25721 = FACE_BOUND('',#25722,.F.); +#25722 = EDGE_LOOP('',(#25723,#25724,#25725,#25745)); +#25723 = ORIENTED_EDGE('',*,*,#24636,.T.); +#25724 = ORIENTED_EDGE('',*,*,#25107,.T.); +#25725 = ORIENTED_EDGE('',*,*,#25726,.F.); +#25726 = EDGE_CURVE('',#25062,#25108,#25727,.T.); +#25727 = SURFACE_CURVE('',#25728,(#25732,#25738),.PCURVE_S1.); +#25728 = LINE('',#25729,#25730); +#25729 = CARTESIAN_POINT('',(-0.7425,-0.6,0.675)); +#25730 = VECTOR('',#25731,1.); +#25731 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#25732 = PCURVE('',#24650,#25733); +#25733 = DEFINITIONAL_REPRESENTATION('',(#25734),#25737); +#25734 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#25735,#25736),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,0.116672618896),.PIECEWISE_BEZIER_KNOTS.); +#25735 = CARTESIAN_POINT('',(6.2009507115E-17,1.)); +#25736 = CARTESIAN_POINT('',(0.134350288425,1.)); +#25737 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25738 = PCURVE('',#24810,#25739); +#25739 = DEFINITIONAL_REPRESENTATION('',(#25740),#25744); +#25740 = LINE('',#25741,#25742); +#25741 = CARTESIAN_POINT('',(8.358145838124E-17,5.777391372306E-17)); +#25742 = VECTOR('',#25743,1.); +#25743 = DIRECTION('',(1.,-4.611496109259E-16)); +#25744 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25745 = ORIENTED_EDGE('',*,*,#25061,.F.); +#25746 = ADVANCED_FACE('',(#25747),#24703,.F.); +#25747 = FACE_BOUND('',#25748,.F.); +#25748 = EDGE_LOOP('',(#25749,#25750,#25751,#25752)); +#25749 = ORIENTED_EDGE('',*,*,#24720,.T.); +#25750 = ORIENTED_EDGE('',*,*,#24690,.T.); +#25751 = ORIENTED_EDGE('',*,*,#24870,.F.); +#25752 = ORIENTED_EDGE('',*,*,#25753,.F.); +#25753 = EDGE_CURVE('',#24721,#24871,#25754,.T.); +#25754 = SURFACE_CURVE('',#25755,(#25758,#25765),.PCURVE_S1.); +#25755 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#25756,#25757),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#25756 = CARTESIAN_POINT('',(-0.7425,0.6,0.675)); +#25757 = CARTESIAN_POINT('',(-0.712635072626,0.540270145251,1.1)); +#25758 = PCURVE('',#24703,#25759); +#25759 = DEFINITIONAL_REPRESENTATION('',(#25760),#25764); +#25760 = LINE('',#25761,#25762); +#25761 = CARTESIAN_POINT('',(2.151965084139E-17,1.036937452787E-16)); +#25762 = VECTOR('',#25763,1.); +#25763 = DIRECTION('',(4.685197169399E-17,1.)); +#25764 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25765 = PCURVE('',#24906,#25766); +#25766 = DEFINITIONAL_REPRESENTATION('',(#25767),#25771); +#25767 = LINE('',#25768,#25769); +#25768 = CARTESIAN_POINT('',(0.116672618896,-1.349148225495E-16)); +#25769 = VECTOR('',#25770,1.); +#25770 = DIRECTION('',(-8.326672684689E-17,1.)); +#25771 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25772 = ADVANCED_FACE('',(#25773),#24783,.F.); +#25773 = FACE_BOUND('',#25774,.F.); +#25774 = EDGE_LOOP('',(#25775,#25776,#25797,#25798,#25818,#25819)); +#25775 = ORIENTED_EDGE('',*,*,#25157,.T.); +#25776 = ORIENTED_EDGE('',*,*,#25777,.T.); +#25777 = EDGE_CURVE('',#25131,#25604,#25778,.T.); +#25778 = SURFACE_CURVE('',#25779,(#25783,#25790),.PCURVE_S1.); +#25779 = LINE('',#25780,#25781); +#25780 = CARTESIAN_POINT('',(-0.825,-0.5175,0.675)); +#25781 = VECTOR('',#25782,1.); +#25782 = DIRECTION('',(0.,1.,0.)); +#25783 = PCURVE('',#24783,#25784); +#25784 = DEFINITIONAL_REPRESENTATION('',(#25785),#25789); +#25785 = LINE('',#25786,#25787); +#25786 = CARTESIAN_POINT('',(0.,-6.332824760093E-17)); +#25787 = VECTOR('',#25788,1.); +#25788 = DIRECTION('',(1.,3.810196442501E-17)); +#25789 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25790 = PCURVE('',#25145,#25791); +#25791 = DEFINITIONAL_REPRESENTATION('',(#25792),#25796); +#25792 = LINE('',#25793,#25794); +#25793 = CARTESIAN_POINT('',(2.5E-02,0.3425)); +#25794 = VECTOR('',#25795,1.); +#25795 = DIRECTION('',(-1.110223024625E-16,-1.)); +#25796 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25797 = ORIENTED_EDGE('',*,*,#25648,.T.); +#25798 = ORIENTED_EDGE('',*,*,#25799,.T.); +#25799 = EDGE_CURVE('',#25627,#24768,#25800,.T.); +#25800 = SURFACE_CURVE('',#25801,(#25804,#25811),.PCURVE_S1.); +#25801 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#25802,#25803),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#25802 = CARTESIAN_POINT('',(-0.825,0.5175,0.675)); +#25803 = CARTESIAN_POINT('',(-0.765270145251,0.487635072626,1.1)); +#25804 = PCURVE('',#24783,#25805); +#25805 = DEFINITIONAL_REPRESENTATION('',(#25806),#25810); +#25806 = LINE('',#25807,#25808); +#25807 = CARTESIAN_POINT('',(1.035,-1.094837554154E-17)); +#25808 = VECTOR('',#25809,1.); +#25809 = DIRECTION('',(0.,1.)); +#25810 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25811 = PCURVE('',#24906,#25812); +#25812 = DEFINITIONAL_REPRESENTATION('',(#25813),#25817); +#25813 = LINE('',#25814,#25815); +#25814 = CARTESIAN_POINT('',(-1.121509151091E-16,4.009344429045E-18)); +#25815 = VECTOR('',#25816,1.); +#25816 = DIRECTION('',(3.760975051646E-18,1.)); +#25817 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25818 = ORIENTED_EDGE('',*,*,#24765,.F.); +#25819 = ORIENTED_EDGE('',*,*,#25820,.F.); +#25820 = EDGE_CURVE('',#25108,#24766,#25821,.T.); +#25821 = SURFACE_CURVE('',#25822,(#25825,#25832),.PCURVE_S1.); +#25822 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#25823,#25824),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#25823 = CARTESIAN_POINT('',(-0.825,-0.5175,0.675)); +#25824 = CARTESIAN_POINT('',(-0.765270145251,-0.487635072626,1.1)); +#25825 = PCURVE('',#24783,#25826); +#25826 = DEFINITIONAL_REPRESENTATION('',(#25827),#25831); +#25827 = LINE('',#25828,#25829); +#25828 = CARTESIAN_POINT('',(3.416910704045E-17,1.389425750114E-16)); +#25829 = VECTOR('',#25830,1.); +#25830 = DIRECTION('',(-2.515023070851E-17,1.)); +#25831 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25832 = PCURVE('',#24810,#25833); +#25833 = DEFINITIONAL_REPRESENTATION('',(#25834),#25838); +#25834 = LINE('',#25835,#25836); +#25835 = CARTESIAN_POINT('',(0.116672618896,3.090683495654E-17)); +#25836 = VECTOR('',#25837,1.); +#25837 = DIRECTION('',(5.551115123126E-17,1.)); +#25838 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25839 = ADVANCED_FACE('',(#25840),#24810,.F.); +#25840 = FACE_BOUND('',#25841,.F.); +#25841 = EDGE_LOOP('',(#25842,#25843,#25844,#25845)); +#25842 = ORIENTED_EDGE('',*,*,#25726,.T.); +#25843 = ORIENTED_EDGE('',*,*,#25820,.T.); +#25844 = ORIENTED_EDGE('',*,*,#24794,.F.); +#25845 = ORIENTED_EDGE('',*,*,#25846,.F.); +#25846 = EDGE_CURVE('',#25062,#24795,#25847,.T.); +#25847 = SURFACE_CURVE('',#25848,(#25851,#25858),.PCURVE_S1.); +#25848 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#25849,#25850),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#25849 = CARTESIAN_POINT('',(-0.7425,-0.6,0.675)); +#25850 = CARTESIAN_POINT('',(-0.712635072626,-0.540270145251,1.1)); +#25851 = PCURVE('',#24810,#25852); +#25852 = DEFINITIONAL_REPRESENTATION('',(#25853),#25857); +#25853 = LINE('',#25854,#25855); +#25854 = CARTESIAN_POINT('',(8.358145838124E-17,5.777391372306E-17)); +#25855 = VECTOR('',#25856,1.); +#25856 = DIRECTION('',(2.707081402921E-17,1.)); +#25857 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25858 = PCURVE('',#24837,#25859); +#25859 = DEFINITIONAL_REPRESENTATION('',(#25860),#25864); +#25860 = LINE('',#25861,#25862); +#25861 = CARTESIAN_POINT('',(1.485,1.216135738973E-16)); +#25862 = VECTOR('',#25863,1.); +#25863 = DIRECTION('',(4.440892098501E-16,1.)); +#25864 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25865 = ADVANCED_FACE('',(#25866),#24906,.F.); +#25866 = FACE_BOUND('',#25867,.F.); +#25867 = EDGE_LOOP('',(#25868,#25869,#25870,#25871)); +#25868 = ORIENTED_EDGE('',*,*,#25700,.T.); +#25869 = ORIENTED_EDGE('',*,*,#25753,.T.); +#25870 = ORIENTED_EDGE('',*,*,#24892,.F.); +#25871 = ORIENTED_EDGE('',*,*,#25799,.F.); +#25872 = ADVANCED_FACE('',(#25873),#24837,.F.); +#25873 = FACE_BOUND('',#25874,.F.); +#25874 = EDGE_LOOP('',(#25875,#25876,#25877,#25878)); +#25875 = ORIENTED_EDGE('',*,*,#25083,.T.); +#25876 = ORIENTED_EDGE('',*,*,#25846,.T.); +#25877 = ORIENTED_EDGE('',*,*,#24821,.F.); +#25878 = ORIENTED_EDGE('',*,*,#25035,.F.); +#25879 = ADVANCED_FACE('',(#25880),#24937,.T.); +#25880 = FACE_BOUND('',#25881,.T.); +#25881 = EDGE_LOOP('',(#25882,#25905,#25933,#25954)); +#25882 = ORIENTED_EDGE('',*,*,#25883,.F.); +#25883 = EDGE_CURVE('',#25884,#24920,#25886,.T.); +#25884 = VERTEX_POINT('',#25885); +#25885 = CARTESIAN_POINT('',(-0.315270145251,-0.490270145251,1.09)); +#25886 = SURFACE_CURVE('',#25887,(#25891,#25898),.PCURVE_S1.); +#25887 = LINE('',#25888,#25889); +#25888 = CARTESIAN_POINT('',(-0.315270145251,-0.490270145251,1.09)); +#25889 = VECTOR('',#25890,1.); +#25890 = DIRECTION('',(0.,0.,1.)); +#25891 = PCURVE('',#24937,#25892); +#25892 = DEFINITIONAL_REPRESENTATION('',(#25893),#25897); +#25893 = LINE('',#25894,#25895); +#25894 = CARTESIAN_POINT('',(0.,0.4)); +#25895 = VECTOR('',#25896,1.); +#25896 = DIRECTION('',(1.,0.)); +#25897 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25898 = PCURVE('',#25019,#25899); +#25899 = DEFINITIONAL_REPRESENTATION('',(#25900),#25904); +#25900 = LINE('',#25901,#25902); +#25901 = CARTESIAN_POINT('',(0.,0.)); +#25902 = VECTOR('',#25903,1.); +#25903 = DIRECTION('',(1.,0.)); +#25904 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25905 = ORIENTED_EDGE('',*,*,#25906,.F.); +#25906 = EDGE_CURVE('',#25907,#25884,#25909,.T.); +#25907 = VERTEX_POINT('',#25908); +#25908 = CARTESIAN_POINT('',(-0.715270145251,-0.490270145251,1.09)); +#25909 = SURFACE_CURVE('',#25910,(#25914,#25921),.PCURVE_S1.); +#25910 = LINE('',#25911,#25912); +#25911 = CARTESIAN_POINT('',(-0.715270145251,-0.490270145251,1.09)); +#25912 = VECTOR('',#25913,1.); +#25913 = DIRECTION('',(1.,0.,0.)); +#25914 = PCURVE('',#24937,#25915); +#25915 = DEFINITIONAL_REPRESENTATION('',(#25916),#25920); +#25916 = LINE('',#25917,#25918); +#25917 = CARTESIAN_POINT('',(0.,0.)); +#25918 = VECTOR('',#25919,1.); +#25919 = DIRECTION('',(0.,1.)); +#25920 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25921 = PCURVE('',#25922,#25927); +#25922 = PLANE('',#25923); +#25923 = AXIS2_PLACEMENT_3D('',#25924,#25925,#25926); +#25924 = CARTESIAN_POINT('',(-0.715270145251,-0.490270145251,1.09)); +#25925 = DIRECTION('',(0.,0.,1.)); +#25926 = DIRECTION('',(1.,0.,-0.)); +#25927 = DEFINITIONAL_REPRESENTATION('',(#25928),#25932); +#25928 = LINE('',#25929,#25930); +#25929 = CARTESIAN_POINT('',(0.,0.)); +#25930 = VECTOR('',#25931,1.); +#25931 = DIRECTION('',(1.,0.)); +#25932 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25933 = ORIENTED_EDGE('',*,*,#25934,.T.); +#25934 = EDGE_CURVE('',#25907,#24922,#25935,.T.); +#25935 = SURFACE_CURVE('',#25936,(#25940,#25947),.PCURVE_S1.); +#25936 = LINE('',#25937,#25938); +#25937 = CARTESIAN_POINT('',(-0.715270145251,-0.490270145251,1.09)); +#25938 = VECTOR('',#25939,1.); +#25939 = DIRECTION('',(0.,0.,1.)); +#25940 = PCURVE('',#24937,#25941); +#25941 = DEFINITIONAL_REPRESENTATION('',(#25942),#25946); +#25942 = LINE('',#25943,#25944); +#25943 = CARTESIAN_POINT('',(0.,0.)); +#25944 = VECTOR('',#25945,1.); +#25945 = DIRECTION('',(1.,0.)); +#25946 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25947 = PCURVE('',#24965,#25948); +#25948 = DEFINITIONAL_REPRESENTATION('',(#25949),#25953); +#25949 = LINE('',#25950,#25951); +#25950 = CARTESIAN_POINT('',(0.,0.)); +#25951 = VECTOR('',#25952,1.); +#25952 = DIRECTION('',(1.,0.)); +#25953 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25954 = ORIENTED_EDGE('',*,*,#24919,.F.); +#25955 = ADVANCED_FACE('',(#25956),#25019,.F.); +#25956 = FACE_BOUND('',#25957,.F.); +#25957 = EDGE_LOOP('',(#25958,#25959,#25982,#26003)); +#25958 = ORIENTED_EDGE('',*,*,#25883,.F.); +#25959 = ORIENTED_EDGE('',*,*,#25960,.T.); +#25960 = EDGE_CURVE('',#25884,#25961,#25963,.T.); +#25961 = VERTEX_POINT('',#25962); +#25962 = CARTESIAN_POINT('',(-0.315270145251,0.490270145251,1.09)); +#25963 = SURFACE_CURVE('',#25964,(#25968,#25975),.PCURVE_S1.); +#25964 = LINE('',#25965,#25966); +#25965 = CARTESIAN_POINT('',(-0.315270145251,-0.490270145251,1.09)); +#25966 = VECTOR('',#25967,1.); +#25967 = DIRECTION('',(0.,1.,0.)); +#25968 = PCURVE('',#25019,#25969); +#25969 = DEFINITIONAL_REPRESENTATION('',(#25970),#25974); +#25970 = LINE('',#25971,#25972); +#25971 = CARTESIAN_POINT('',(0.,0.)); +#25972 = VECTOR('',#25973,1.); +#25973 = DIRECTION('',(0.,-1.)); +#25974 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25975 = PCURVE('',#25922,#25976); +#25976 = DEFINITIONAL_REPRESENTATION('',(#25977),#25981); +#25977 = LINE('',#25978,#25979); +#25978 = CARTESIAN_POINT('',(0.4,0.)); +#25979 = VECTOR('',#25980,1.); +#25980 = DIRECTION('',(0.,1.)); +#25981 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25982 = ORIENTED_EDGE('',*,*,#25983,.T.); +#25983 = EDGE_CURVE('',#25961,#24978,#25984,.T.); +#25984 = SURFACE_CURVE('',#25985,(#25989,#25996),.PCURVE_S1.); +#25985 = LINE('',#25986,#25987); +#25986 = CARTESIAN_POINT('',(-0.315270145251,0.490270145251,1.09)); +#25987 = VECTOR('',#25988,1.); +#25988 = DIRECTION('',(0.,0.,1.)); +#25989 = PCURVE('',#25019,#25990); +#25990 = DEFINITIONAL_REPRESENTATION('',(#25991),#25995); +#25991 = LINE('',#25992,#25993); +#25992 = CARTESIAN_POINT('',(0.,-0.980540290502)); +#25993 = VECTOR('',#25994,1.); +#25994 = DIRECTION('',(1.,0.)); +#25995 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#25996 = PCURVE('',#24993,#25997); +#25997 = DEFINITIONAL_REPRESENTATION('',(#25998),#26002); +#25998 = LINE('',#25999,#26000); +#25999 = CARTESIAN_POINT('',(0.,0.4)); +#26000 = VECTOR('',#26001,1.); +#26001 = DIRECTION('',(1.,0.)); +#26002 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26003 = ORIENTED_EDGE('',*,*,#25005,.F.); +#26004 = ADVANCED_FACE('',(#26005),#24993,.F.); +#26005 = FACE_BOUND('',#26006,.F.); +#26006 = EDGE_LOOP('',(#26007,#26008,#26031,#26052)); +#26007 = ORIENTED_EDGE('',*,*,#25983,.F.); +#26008 = ORIENTED_EDGE('',*,*,#26009,.F.); +#26009 = EDGE_CURVE('',#26010,#25961,#26012,.T.); +#26010 = VERTEX_POINT('',#26011); +#26011 = CARTESIAN_POINT('',(-0.715270145251,0.490270145251,1.09)); +#26012 = SURFACE_CURVE('',#26013,(#26017,#26024),.PCURVE_S1.); +#26013 = LINE('',#26014,#26015); +#26014 = CARTESIAN_POINT('',(-0.715270145251,0.490270145251,1.09)); +#26015 = VECTOR('',#26016,1.); +#26016 = DIRECTION('',(1.,0.,0.)); +#26017 = PCURVE('',#24993,#26018); +#26018 = DEFINITIONAL_REPRESENTATION('',(#26019),#26023); +#26019 = LINE('',#26020,#26021); +#26020 = CARTESIAN_POINT('',(0.,0.)); +#26021 = VECTOR('',#26022,1.); +#26022 = DIRECTION('',(0.,1.)); +#26023 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26024 = PCURVE('',#25922,#26025); +#26025 = DEFINITIONAL_REPRESENTATION('',(#26026),#26030); +#26026 = LINE('',#26027,#26028); +#26027 = CARTESIAN_POINT('',(0.,0.980540290502)); +#26028 = VECTOR('',#26029,1.); +#26029 = DIRECTION('',(1.,0.)); +#26030 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26031 = ORIENTED_EDGE('',*,*,#26032,.T.); +#26032 = EDGE_CURVE('',#26010,#24950,#26033,.T.); +#26033 = SURFACE_CURVE('',#26034,(#26038,#26045),.PCURVE_S1.); +#26034 = LINE('',#26035,#26036); +#26035 = CARTESIAN_POINT('',(-0.715270145251,0.490270145251,1.09)); +#26036 = VECTOR('',#26037,1.); +#26037 = DIRECTION('',(0.,0.,1.)); +#26038 = PCURVE('',#24993,#26039); +#26039 = DEFINITIONAL_REPRESENTATION('',(#26040),#26044); +#26040 = LINE('',#26041,#26042); +#26041 = CARTESIAN_POINT('',(0.,0.)); +#26042 = VECTOR('',#26043,1.); +#26043 = DIRECTION('',(1.,0.)); +#26044 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26045 = PCURVE('',#24965,#26046); +#26046 = DEFINITIONAL_REPRESENTATION('',(#26047),#26051); +#26047 = LINE('',#26048,#26049); +#26048 = CARTESIAN_POINT('',(0.,-0.980540290502)); +#26049 = VECTOR('',#26050,1.); +#26050 = DIRECTION('',(1.,0.)); +#26051 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26052 = ORIENTED_EDGE('',*,*,#24977,.F.); +#26053 = ADVANCED_FACE('',(#26054),#24965,.T.); +#26054 = FACE_BOUND('',#26055,.T.); +#26055 = EDGE_LOOP('',(#26056,#26057,#26078,#26079)); +#26056 = ORIENTED_EDGE('',*,*,#25934,.F.); +#26057 = ORIENTED_EDGE('',*,*,#26058,.T.); +#26058 = EDGE_CURVE('',#25907,#26010,#26059,.T.); +#26059 = SURFACE_CURVE('',#26060,(#26064,#26071),.PCURVE_S1.); +#26060 = LINE('',#26061,#26062); +#26061 = CARTESIAN_POINT('',(-0.715270145251,-0.490270145251,1.09)); +#26062 = VECTOR('',#26063,1.); +#26063 = DIRECTION('',(0.,1.,0.)); +#26064 = PCURVE('',#24965,#26065); +#26065 = DEFINITIONAL_REPRESENTATION('',(#26066),#26070); +#26066 = LINE('',#26067,#26068); +#26067 = CARTESIAN_POINT('',(0.,0.)); +#26068 = VECTOR('',#26069,1.); +#26069 = DIRECTION('',(0.,-1.)); +#26070 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26071 = PCURVE('',#25922,#26072); +#26072 = DEFINITIONAL_REPRESENTATION('',(#26073),#26077); +#26073 = LINE('',#26074,#26075); +#26074 = CARTESIAN_POINT('',(0.,0.)); +#26075 = VECTOR('',#26076,1.); +#26076 = DIRECTION('',(0.,1.)); +#26077 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26078 = ORIENTED_EDGE('',*,*,#26032,.T.); +#26079 = ORIENTED_EDGE('',*,*,#24949,.F.); +#26080 = ADVANCED_FACE('',(#26081),#25145,.F.); +#26081 = FACE_BOUND('',#26082,.F.); +#26082 = EDGE_LOOP('',(#26083,#26084,#26105,#26106)); +#26083 = ORIENTED_EDGE('',*,*,#25130,.F.); +#26084 = ORIENTED_EDGE('',*,*,#26085,.T.); +#26085 = EDGE_CURVE('',#24382,#24439,#26086,.T.); +#26086 = SURFACE_CURVE('',#26087,(#26091,#26098),.PCURVE_S1.); +#26087 = LINE('',#26088,#26089); +#26088 = CARTESIAN_POINT('',(-0.85,-0.175,0.675)); +#26089 = VECTOR('',#26090,1.); +#26090 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#26091 = PCURVE('',#25145,#26092); +#26092 = DEFINITIONAL_REPRESENTATION('',(#26093),#26097); +#26093 = LINE('',#26094,#26095); +#26094 = CARTESIAN_POINT('',(0.,-0.)); +#26095 = VECTOR('',#26096,1.); +#26096 = DIRECTION('',(0.,-1.)); +#26097 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26098 = PCURVE('',#25394,#26099); +#26099 = DEFINITIONAL_REPRESENTATION('',(#26100),#26104); +#26100 = LINE('',#26101,#26102); +#26101 = CARTESIAN_POINT('',(4.712388980385,0.)); +#26102 = VECTOR('',#26103,1.); +#26103 = DIRECTION('',(0.,-1.)); +#26104 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26105 = ORIENTED_EDGE('',*,*,#25603,.T.); +#26106 = ORIENTED_EDGE('',*,*,#25777,.F.); +#26107 = ADVANCED_FACE('',(#26108),#25394,.T.); +#26108 = FACE_BOUND('',#26109,.T.); +#26109 = EDGE_LOOP('',(#26110,#26111,#26112,#26113)); +#26110 = ORIENTED_EDGE('',*,*,#25379,.T.); +#26111 = ORIENTED_EDGE('',*,*,#26085,.T.); +#26112 = ORIENTED_EDGE('',*,*,#25578,.F.); +#26113 = ORIENTED_EDGE('',*,*,#26114,.F.); +#26114 = EDGE_CURVE('',#25352,#25556,#26115,.T.); +#26115 = SURFACE_CURVE('',#26116,(#26120,#26127),.PCURVE_S1.); +#26116 = LINE('',#26117,#26118); +#26117 = CARTESIAN_POINT('',(-1.07,-0.175,0.455)); +#26118 = VECTOR('',#26119,1.); +#26119 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#26120 = PCURVE('',#25394,#26121); +#26121 = DEFINITIONAL_REPRESENTATION('',(#26122),#26126); +#26122 = LINE('',#26123,#26124); +#26123 = CARTESIAN_POINT('',(6.28318530718,2.775557561563E-17)); +#26124 = VECTOR('',#26125,1.); +#26125 = DIRECTION('',(0.,-1.)); +#26126 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26127 = PCURVE('',#25367,#26128); +#26128 = DEFINITIONAL_REPRESENTATION('',(#26129),#26133); +#26129 = LINE('',#26130,#26131); +#26130 = CARTESIAN_POINT('',(0.235,0.)); +#26131 = VECTOR('',#26132,1.); +#26132 = DIRECTION('',(0.,-1.)); +#26133 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26134 = ADVANCED_FACE('',(#26135),#25367,.F.); +#26135 = FACE_BOUND('',#26136,.F.); +#26136 = EDGE_LOOP('',(#26137,#26158,#26159,#26160)); +#26137 = ORIENTED_EDGE('',*,*,#26138,.T.); +#26138 = EDGE_CURVE('',#25319,#25528,#26139,.T.); +#26139 = SURFACE_CURVE('',#26140,(#26144,#26151),.PCURVE_S1.); +#26140 = LINE('',#26141,#26142); +#26141 = CARTESIAN_POINT('',(-1.07,-0.175,0.22)); +#26142 = VECTOR('',#26143,1.); +#26143 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#26144 = PCURVE('',#25367,#26145); +#26145 = DEFINITIONAL_REPRESENTATION('',(#26146),#26150); +#26146 = LINE('',#26147,#26148); +#26147 = CARTESIAN_POINT('',(0.,0.)); +#26148 = VECTOR('',#26149,1.); +#26149 = DIRECTION('',(0.,-1.)); +#26150 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26151 = PCURVE('',#25339,#26152); +#26152 = DEFINITIONAL_REPRESENTATION('',(#26153),#26157); +#26153 = LINE('',#26154,#26155); +#26154 = CARTESIAN_POINT('',(1.570796326795,-2.775557561563E-17)); +#26155 = VECTOR('',#26156,1.); +#26156 = DIRECTION('',(0.,-1.)); +#26157 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26158 = ORIENTED_EDGE('',*,*,#25555,.T.); +#26159 = ORIENTED_EDGE('',*,*,#26114,.F.); +#26160 = ORIENTED_EDGE('',*,*,#25351,.F.); +#26161 = ADVANCED_FACE('',(#26162),#25339,.F.); +#26162 = FACE_BOUND('',#26163,.F.); +#26163 = EDGE_LOOP('',(#26164,#26185,#26186,#26187)); +#26164 = ORIENTED_EDGE('',*,*,#26165,.T.); +#26165 = EDGE_CURVE('',#25291,#25505,#26166,.T.); +#26166 = SURFACE_CURVE('',#26167,(#26171,#26178),.PCURVE_S1.); +#26167 = LINE('',#26168,#26169); +#26168 = CARTESIAN_POINT('',(-1.14,-0.175,0.15)); +#26169 = VECTOR('',#26170,1.); +#26170 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#26171 = PCURVE('',#25339,#26172); +#26172 = DEFINITIONAL_REPRESENTATION('',(#26173),#26177); +#26173 = LINE('',#26174,#26175); +#26174 = CARTESIAN_POINT('',(0.,0.)); +#26175 = VECTOR('',#26176,1.); +#26176 = DIRECTION('',(0.,-1.)); +#26177 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26178 = PCURVE('',#25306,#26179); +#26179 = DEFINITIONAL_REPRESENTATION('',(#26180),#26184); +#26180 = LINE('',#26181,#26182); +#26181 = CARTESIAN_POINT('',(0.11,-1.221245327088E-17)); +#26182 = VECTOR('',#26183,1.); +#26183 = DIRECTION('',(0.,-1.)); +#26184 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26185 = ORIENTED_EDGE('',*,*,#25527,.T.); +#26186 = ORIENTED_EDGE('',*,*,#26138,.F.); +#26187 = ORIENTED_EDGE('',*,*,#25318,.F.); +#26188 = ADVANCED_FACE('',(#26189),#25306,.F.); +#26189 = FACE_BOUND('',#26190,.F.); +#26190 = EDGE_LOOP('',(#26191,#26212,#26213,#26214)); +#26191 = ORIENTED_EDGE('',*,*,#26192,.T.); +#26192 = EDGE_CURVE('',#25263,#25482,#26193,.T.); +#26193 = SURFACE_CURVE('',#26194,(#26198,#26205),.PCURVE_S1.); +#26194 = LINE('',#26195,#26196); +#26195 = CARTESIAN_POINT('',(-1.25,-0.175,0.15)); +#26196 = VECTOR('',#26197,1.); +#26197 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#26198 = PCURVE('',#25306,#26199); +#26199 = DEFINITIONAL_REPRESENTATION('',(#26200),#26204); +#26200 = LINE('',#26201,#26202); +#26201 = CARTESIAN_POINT('',(0.,-0.)); +#26202 = VECTOR('',#26203,1.); +#26203 = DIRECTION('',(0.,-1.)); +#26204 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26205 = PCURVE('',#25278,#26206); +#26206 = DEFINITIONAL_REPRESENTATION('',(#26207),#26211); +#26207 = LINE('',#26208,#26209); +#26208 = CARTESIAN_POINT('',(0.15,0.)); +#26209 = VECTOR('',#26210,1.); +#26210 = DIRECTION('',(0.,-1.)); +#26211 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26212 = ORIENTED_EDGE('',*,*,#25504,.T.); +#26213 = ORIENTED_EDGE('',*,*,#26165,.F.); +#26214 = ORIENTED_EDGE('',*,*,#25290,.F.); +#26215 = ADVANCED_FACE('',(#26216),#25278,.F.); +#26216 = FACE_BOUND('',#26217,.F.); +#26217 = EDGE_LOOP('',(#26218,#26239,#26240,#26241)); +#26218 = ORIENTED_EDGE('',*,*,#26219,.T.); +#26219 = EDGE_CURVE('',#25235,#25459,#26220,.T.); +#26220 = SURFACE_CURVE('',#26221,(#26225,#26232),.PCURVE_S1.); +#26221 = LINE('',#26222,#26223); +#26222 = CARTESIAN_POINT('',(-1.25,-0.175,0.)); +#26223 = VECTOR('',#26224,1.); +#26224 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#26225 = PCURVE('',#25278,#26226); +#26226 = DEFINITIONAL_REPRESENTATION('',(#26227),#26231); +#26227 = LINE('',#26228,#26229); +#26228 = CARTESIAN_POINT('',(0.,0.)); +#26229 = VECTOR('',#26230,1.); +#26230 = DIRECTION('',(0.,-1.)); +#26231 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26232 = PCURVE('',#25250,#26233); +#26233 = DEFINITIONAL_REPRESENTATION('',(#26234),#26238); +#26234 = LINE('',#26235,#26236); +#26235 = CARTESIAN_POINT('',(0.11,1.221245327088E-17)); +#26236 = VECTOR('',#26237,1.); +#26237 = DIRECTION('',(0.,-1.)); +#26238 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26239 = ORIENTED_EDGE('',*,*,#25481,.T.); +#26240 = ORIENTED_EDGE('',*,*,#26192,.F.); +#26241 = ORIENTED_EDGE('',*,*,#25262,.F.); +#26242 = ADVANCED_FACE('',(#26243),#25250,.F.); +#26243 = FACE_BOUND('',#26244,.F.); +#26244 = EDGE_LOOP('',(#26245,#26266,#26267,#26268)); +#26245 = ORIENTED_EDGE('',*,*,#26246,.T.); +#26246 = EDGE_CURVE('',#25206,#25435,#26247,.T.); +#26247 = SURFACE_CURVE('',#26248,(#26252,#26259),.PCURVE_S1.); +#26248 = LINE('',#26249,#26250); +#26249 = CARTESIAN_POINT('',(-1.14,-0.175,0.)); +#26250 = VECTOR('',#26251,1.); +#26251 = DIRECTION('',(1.110223024625E-16,1.,0.)); +#26252 = PCURVE('',#25250,#26253); +#26253 = DEFINITIONAL_REPRESENTATION('',(#26254),#26258); +#26254 = LINE('',#26255,#26256); +#26255 = CARTESIAN_POINT('',(0.,0.)); +#26256 = VECTOR('',#26257,1.); +#26257 = DIRECTION('',(0.,-1.)); +#26258 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26259 = PCURVE('',#25222,#26260); +#26260 = DEFINITIONAL_REPRESENTATION('',(#26261),#26265); +#26261 = LINE('',#26262,#26263); +#26262 = CARTESIAN_POINT('',(4.712388980385,0.)); +#26263 = VECTOR('',#26264,1.); +#26264 = DIRECTION('',(0.,-1.)); +#26265 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26266 = ORIENTED_EDGE('',*,*,#25458,.T.); +#26267 = ORIENTED_EDGE('',*,*,#26219,.F.); +#26268 = ORIENTED_EDGE('',*,*,#25234,.F.); +#26269 = ADVANCED_FACE('',(#26270),#25222,.T.); +#26270 = FACE_BOUND('',#26271,.T.); +#26271 = EDGE_LOOP('',(#26272,#26273,#26274,#26275)); +#26272 = ORIENTED_EDGE('',*,*,#25205,.T.); +#26273 = ORIENTED_EDGE('',*,*,#26246,.T.); +#26274 = ORIENTED_EDGE('',*,*,#25434,.F.); +#26275 = ORIENTED_EDGE('',*,*,#25673,.F.); +#26276 = ADVANCED_FACE('',(#26277),#25922,.T.); +#26277 = FACE_BOUND('',#26278,.T.); +#26278 = EDGE_LOOP('',(#26279,#26280,#26281,#26282)); +#26279 = ORIENTED_EDGE('',*,*,#26058,.F.); +#26280 = ORIENTED_EDGE('',*,*,#25906,.T.); +#26281 = ORIENTED_EDGE('',*,*,#25960,.T.); +#26282 = ORIENTED_EDGE('',*,*,#26009,.F.); +#26283 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#26287)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#26284,#26285,#26286)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#26284 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#26285 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#26286 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#26287 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-02),#26284, + 'distance_accuracy_value','confusion accuracy'); +#26288 = SHAPE_DEFINITION_REPRESENTATION(#26289,#22134); +#26289 = PRODUCT_DEFINITION_SHAPE('','',#26290); +#26290 = PRODUCT_DEFINITION('design','',#26291,#26294); +#26291 = PRODUCT_DEFINITION_FORMATION('','',#26292); +#26292 = PRODUCT('SOLID','SOLID','',(#26293)); +#26293 = PRODUCT_CONTEXT('',#2,'mechanical'); +#26294 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#26295 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#26296,#26298); +#26296 = ( REPRESENTATION_RELATIONSHIP('','',#22134,#22124) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#26297) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#26297 = ITEM_DEFINED_TRANSFORMATION('','',#11,#22125); +#26298 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #26299); +#26299 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('13','=>[0:1:1:11]','',#22119, + #26290,$); +#26300 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#26292)); +#26301 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#26302,#26304); +#26302 = ( REPRESENTATION_RELATIONSHIP('','',#22124,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#26303) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#26303 = ITEM_DEFINED_TRANSFORMATION('','',#11,#47); +#26304 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #26305); +#26305 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('14','','',#5,#22119,$); +#26306 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#22121)); +#26307 = SHAPE_DEFINITION_REPRESENTATION(#26308,#26314); +#26308 = PRODUCT_DEFINITION_SHAPE('','',#26309); +#26309 = PRODUCT_DEFINITION('design','',#26310,#26313); +#26310 = PRODUCT_DEFINITION_FORMATION('','',#26311); +#26311 = PRODUCT('CP_Elec_8x10.5','CP_Elec_8x10.5','',(#26312)); +#26312 = PRODUCT_CONTEXT('',#2,'mechanical'); +#26313 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#26314 = SHAPE_REPRESENTATION('',(#11,#26315),#26319); +#26315 = AXIS2_PLACEMENT_3D('',#26316,#26317,#26318); +#26316 = CARTESIAN_POINT('',(0.,0.,0.)); +#26317 = DIRECTION('',(0.,0.,1.)); +#26318 = DIRECTION('',(1.,0.,-0.)); +#26319 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#26323)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#26320,#26321,#26322)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#26320 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#26321 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#26322 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#26323 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-02),#26320, + 'distance_accuracy_value','confusion accuracy'); +#26324 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#26325),#29441); +#26325 = MANIFOLD_SOLID_BREP('',#26326); +#26326 = CLOSED_SHELL('',(#26327,#26485,#26545,#26636,#26870,#26996, + #27235,#27289,#27343,#27494,#27645,#27695,#27745,#27915,#28002, + #28271,#28298,#28374,#28381,#28408,#28415,#28447,#28454,#28486, + #28493,#28569,#28706,#28783,#28833,#28883,#28960,#29010,#29060, + #29087,#29114,#29250,#29368,#29396,#29403,#29410,#29436)); +#26327 = ADVANCED_FACE('',(#26328),#26351,.T.); +#26328 = FACE_BOUND('',#26329,.T.); +#26329 = EDGE_LOOP('',(#26330,#26434,#26457,#26484)); +#26330 = ORIENTED_EDGE('',*,*,#26331,.T.); +#26331 = EDGE_CURVE('',#26332,#26332,#26334,.T.); +#26332 = VERTEX_POINT('',#26333); +#26333 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,2.361821953996)); +#26334 = SURFACE_CURVE('',#26335,(#26350,#26384),.PCURVE_S1.); +#26335 = ( BOUNDED_CURVE() B_SPLINE_CURVE(13,(#26336,#26337,#26338, + #26339,#26340,#26341,#26342,#26343,#26344,#26345,#26346,#26347, +#26348,#26349),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,13,13 + ,1),(-25.13274122871,4.970488814277E-16,25.132741228718, +50.265482457436),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,1.,1.000000000001,0.999999999997, + 1.000000000006,0.999999999991,1.000000000009,0.999999999992, + 1.000000000006,0.999999999996,1.000000000002,0.999999999999,1.,1.)) +REPRESENTATION_ITEM('') ); +#26336 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,2.361821953996)); +#26337 = CARTESIAN_POINT('',(-4.000000000002,1.905321418822, + 2.361821953996)); +#26338 = CARTESIAN_POINT('',(-3.015267027677,3.854580985394, + 2.361821953996)); +#26339 = CARTESIAN_POINT('',(-0.988824457309,5.248384513409, + 2.361821953996)); +#26340 = CARTESIAN_POINT('',(1.799817736622,5.462446172588, + 2.361821953996)); +#26341 = CARTESIAN_POINT('',(4.208872671031,3.976872241642, + 2.361821953996)); +#26342 = CARTESIAN_POINT('',(5.975661405973,1.80826619315,2.361821953996 + )); +#26343 = CARTESIAN_POINT('',(5.975661406071,-1.80826619318, + 2.361821953996)); +#26344 = CARTESIAN_POINT('',(4.208872670977,-3.976872241589, + 2.361821953996)); +#26345 = CARTESIAN_POINT('',(1.799817736634,-5.462446172635, + 2.361821953996)); +#26346 = CARTESIAN_POINT('',(-0.988824457301,-5.248384513387, + 2.361821953996)); +#26347 = CARTESIAN_POINT('',(-3.015267027684,-3.8545809854, + 2.361821953996)); +#26348 = CARTESIAN_POINT('',(-4.,-1.905321418822,2.361821953996)); +#26349 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,2.361821953996)); +#26350 = PCURVE('',#26351,#26356); +#26351 = CYLINDRICAL_SURFACE('',#26352,4.); +#26352 = AXIS2_PLACEMENT_3D('',#26353,#26354,#26355); +#26353 = CARTESIAN_POINT('',(0.,0.,0.65)); +#26354 = DIRECTION('',(0.,0.,1.)); +#26355 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#26356 = DEFINITIONAL_REPRESENTATION('',(#26357),#26383); +#26357 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#26358,#26359,#26360,#26361, + #26362,#26363,#26364,#26365,#26366,#26367,#26368,#26369,#26370, + #26371,#26372,#26373,#26374,#26375,#26376,#26377,#26378,#26379, + #26380,#26381,#26382),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1 + ,1,1,1,1,1,1,1,1,1,1,4),(4.970488814277E-16,1.142397328578, + 2.284794657156,3.427191985734,4.569589314312,5.71198664289, + 6.854383971469,7.996781300047,9.139178628625,10.281575957203, + 11.423973285781,12.566370614359,13.708767942937,14.851165271515, + 15.993562600093,17.135959928671,18.278357257249,19.420754585828, + 20.563151914406,21.705549242984,22.847946571562,23.99034390014, + 25.132741228718),.QUASI_UNIFORM_KNOTS.); +#26358 = CARTESIAN_POINT('',(6.28318530718,1.711821953996)); +#26359 = CARTESIAN_POINT('',(6.189328461459,1.711821953996)); +#26360 = CARTESIAN_POINT('',(6.000569517416,1.711821953996)); +#26361 = CARTESIAN_POINT('',(5.715310708576,1.711821953996)); +#26362 = CARTESIAN_POINT('',(5.429076399901,1.711821953996)); +#26363 = CARTESIAN_POINT('',(5.142558136645,1.711821953996)); +#26364 = CARTESIAN_POINT('',(4.856167280849,1.711821953996)); +#26365 = CARTESIAN_POINT('',(4.570033461293,1.711821953996)); +#26366 = CARTESIAN_POINT('',(4.284140690769,1.711821953996)); +#26367 = CARTESIAN_POINT('',(3.99841915947,1.711821953996)); +#26368 = CARTESIAN_POINT('',(3.712790418604,1.711821953996)); +#26369 = CARTESIAN_POINT('',(3.427191456113,1.711821953996)); +#26370 = CARTESIAN_POINT('',(3.14159265359,1.711821953996)); +#26371 = CARTESIAN_POINT('',(2.855993851066,1.711821953996)); +#26372 = CARTESIAN_POINT('',(2.570394888575,1.711821953996)); +#26373 = CARTESIAN_POINT('',(2.28476614771,1.711821953996)); +#26374 = CARTESIAN_POINT('',(1.999044616411,1.711821953996)); +#26375 = CARTESIAN_POINT('',(1.713151845887,1.711821953996)); +#26376 = CARTESIAN_POINT('',(1.42701802633,1.711821953996)); +#26377 = CARTESIAN_POINT('',(1.140627170535,1.711821953996)); +#26378 = CARTESIAN_POINT('',(0.854108907278,1.711821953996)); +#26379 = CARTESIAN_POINT('',(0.567874598603,1.711821953996)); +#26380 = CARTESIAN_POINT('',(0.282615789764,1.711821953996)); +#26381 = CARTESIAN_POINT('',(9.385684572073E-02,1.711821953996)); +#26382 = CARTESIAN_POINT('',(0.,1.711821953996)); +#26383 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26384 = PCURVE('',#26385,#26428); +#26385 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,13,( + (#26386,#26387,#26388,#26389,#26390,#26391,#26392,#26393,#26394 + ,#26395,#26396,#26397,#26398,#26399) + ,(#26400,#26401,#26402,#26403,#26404,#26405,#26406,#26407,#26408 + ,#26409,#26410,#26411,#26412,#26413) + ,(#26414,#26415,#26416,#26417,#26418,#26419,#26420,#26421,#26422 + ,#26423,#26424,#26425,#26426,#26427 +)),.UNSPECIFIED.,.F.,.T.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(1,13,13 + ,1),(0.,25.132741228718),(-25.13274122871,4.970488814277E-16, + 25.132741228718,50.265482457436),.UNSPECIFIED.) +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE(( + (1.,1.,1.000000000001,0.999999999997,1.000000000006,0.999999999991 + ,1.000000000009,0.999999999992,1.000000000006,0.999999999996 + ,1.000000000002,0.999999999999,1.,1.) + ,(0.738548945876,0.738548945876,0.738548945877,0.738548945874 + ,0.73854894588,0.73854894587,0.738548945882,0.738548945871 + ,0.738548945879,0.738548945874,0.738548945877,0.738548945876 + ,0.738548945876,0.738548945876) + ,(1.,1.,1.000000000001,0.999999999997,1.000000000006,0.999999999991 + ,1.000000000009,0.999999999992,1.000000000006,0.999999999996 +,1.000000000002,0.999999999999,1.,1. + ))) REPRESENTATION_ITEM('') SURFACE() ); +#26386 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,2.361821953996)); +#26387 = CARTESIAN_POINT('',(-4.000000000002,1.905321418822, + 2.361821953996)); +#26388 = CARTESIAN_POINT('',(-3.015267027677,3.854580985394, + 2.361821953996)); +#26389 = CARTESIAN_POINT('',(-0.988824457309,5.248384513409, + 2.361821953996)); +#26390 = CARTESIAN_POINT('',(1.799817736622,5.462446172588, + 2.361821953996)); +#26391 = CARTESIAN_POINT('',(4.208872671031,3.976872241642, + 2.361821953996)); +#26392 = CARTESIAN_POINT('',(5.975661405973,1.80826619315,2.361821953996 + )); +#26393 = CARTESIAN_POINT('',(5.975661406071,-1.80826619318, + 2.361821953996)); +#26394 = CARTESIAN_POINT('',(4.208872670977,-3.976872241589, + 2.361821953996)); +#26395 = CARTESIAN_POINT('',(1.799817736634,-5.462446172635, + 2.361821953996)); +#26396 = CARTESIAN_POINT('',(-0.988824457301,-5.248384513387, + 2.361821953996)); +#26397 = CARTESIAN_POINT('',(-3.015267027684,-3.8545809854, + 2.361821953996)); +#26398 = CARTESIAN_POINT('',(-4.,-1.905321418822,2.361821953996)); +#26399 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,2.361821953996)); +#26400 = CARTESIAN_POINT('',(-4.,-8.554193359611E-16,2.398336791163)); +#26401 = CARTESIAN_POINT('',(-4.000000000002,1.905321418822, + 2.398336791163)); +#26402 = CARTESIAN_POINT('',(-3.015267027677,3.854580985394, + 2.398336791163)); +#26403 = CARTESIAN_POINT('',(-0.988824457309,5.248384513409, + 2.398336791163)); +#26404 = CARTESIAN_POINT('',(1.799817736624,5.46244617259,2.398336791163 + )); +#26405 = CARTESIAN_POINT('',(4.208872671026,3.976872241639, + 2.398336791163)); +#26406 = CARTESIAN_POINT('',(5.975661405984,1.80826619315,2.398336791163 + )); +#26407 = CARTESIAN_POINT('',(5.975661406059,-1.808266193174, + 2.398336791163)); +#26408 = CARTESIAN_POINT('',(4.208872670986,-3.976872241597, + 2.398336791163)); +#26409 = CARTESIAN_POINT('',(1.799817736631,-5.462446172628, + 2.398336791163)); +#26410 = CARTESIAN_POINT('',(-0.988824457301,-5.248384513391, + 2.398336791163)); +#26411 = CARTESIAN_POINT('',(-3.015267027684,-3.854580985398, + 2.398336791163)); +#26412 = CARTESIAN_POINT('',(-4.,-1.905321418822,2.398336791163)); +#26413 = CARTESIAN_POINT('',(-4.,-8.554193359611E-16,2.398336791163)); +#26414 = CARTESIAN_POINT('',(-3.963636363636,4.854054585711E-16, + 2.401656321814)); +#26415 = CARTESIAN_POINT('',(-3.963636363638,1.888000315015, + 2.401656321814)); +#26416 = CARTESIAN_POINT('',(-2.987855509242,3.819539340071, + 2.401656321814)); +#26417 = CARTESIAN_POINT('',(-0.979835144066,5.200671926926, + 2.401656321814)); +#26418 = CARTESIAN_POINT('',(1.783455757208,5.412787571015, + 2.401656321814)); +#26419 = CARTESIAN_POINT('',(4.170610192188,3.940718857634, + 2.401656321814)); +#26420 = CARTESIAN_POINT('',(5.921337211393,1.791827409567, + 2.401656321814)); +#26421 = CARTESIAN_POINT('',(5.92133721145,-1.791827409597, + 2.401656321814)); +#26422 = CARTESIAN_POINT('',(4.170610192167,-3.940718857581, + 2.401656321814)); +#26423 = CARTESIAN_POINT('',(1.783455757199,-5.412787571062, + 2.401656321814)); +#26424 = CARTESIAN_POINT('',(-0.979835144047,-5.200671926904, + 2.401656321814)); +#26425 = CARTESIAN_POINT('',(-2.987855509253,-3.819539340077, + 2.401656321814)); +#26426 = CARTESIAN_POINT('',(-3.963636363636,-1.888000315014, + 2.401656321814)); +#26427 = CARTESIAN_POINT('',(-3.963636363636,4.854054585711E-16, + 2.401656321814)); +#26428 = DEFINITIONAL_REPRESENTATION('',(#26429),#26433); +#26429 = LINE('',#26430,#26431); +#26430 = CARTESIAN_POINT('',(1.299235425529E-13,-4.970488814277E-16)); +#26431 = VECTOR('',#26432,1.); +#26432 = DIRECTION('',(0.,1.)); +#26433 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26434 = ORIENTED_EDGE('',*,*,#26435,.F.); +#26435 = EDGE_CURVE('',#26436,#26332,#26438,.T.); +#26436 = VERTEX_POINT('',#26437); +#26437 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,1.183333333333)); +#26438 = SEAM_CURVE('',#26439,(#26443,#26450),.PCURVE_S1.); +#26439 = LINE('',#26440,#26441); +#26440 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,0.65)); +#26441 = VECTOR('',#26442,1.); +#26442 = DIRECTION('',(0.,0.,1.)); +#26443 = PCURVE('',#26351,#26444); +#26444 = DEFINITIONAL_REPRESENTATION('',(#26445),#26449); +#26445 = LINE('',#26446,#26447); +#26446 = CARTESIAN_POINT('',(0.,0.)); +#26447 = VECTOR('',#26448,1.); +#26448 = DIRECTION('',(0.,1.)); +#26449 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26450 = PCURVE('',#26351,#26451); +#26451 = DEFINITIONAL_REPRESENTATION('',(#26452),#26456); +#26452 = LINE('',#26453,#26454); +#26453 = CARTESIAN_POINT('',(6.28318530718,0.)); +#26454 = VECTOR('',#26455,1.); +#26455 = DIRECTION('',(0.,1.)); +#26456 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26457 = ORIENTED_EDGE('',*,*,#26458,.F.); +#26458 = EDGE_CURVE('',#26436,#26436,#26459,.T.); +#26459 = SURFACE_CURVE('',#26460,(#26465,#26472),.PCURVE_S1.); +#26460 = CIRCLE('',#26461,4.); +#26461 = AXIS2_PLACEMENT_3D('',#26462,#26463,#26464); +#26462 = CARTESIAN_POINT('',(0.,0.,1.183333333333)); +#26463 = DIRECTION('',(0.,0.,-1.)); +#26464 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#26465 = PCURVE('',#26351,#26466); +#26466 = DEFINITIONAL_REPRESENTATION('',(#26467),#26471); +#26467 = LINE('',#26468,#26469); +#26468 = CARTESIAN_POINT('',(6.28318530718,0.533333333333)); +#26469 = VECTOR('',#26470,1.); +#26470 = DIRECTION('',(-1.,0.)); +#26471 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26472 = PCURVE('',#26473,#26478); +#26473 = TOROIDAL_SURFACE('',#26474,3.466666666667,0.533333333333); +#26474 = AXIS2_PLACEMENT_3D('',#26475,#26476,#26477); +#26475 = CARTESIAN_POINT('',(0.,0.,1.183333333333)); +#26476 = DIRECTION('',(0.,0.,-1.)); +#26477 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#26478 = DEFINITIONAL_REPRESENTATION('',(#26479),#26483); +#26479 = LINE('',#26480,#26481); +#26480 = CARTESIAN_POINT('',(0.,0.)); +#26481 = VECTOR('',#26482,1.); +#26482 = DIRECTION('',(1.,0.)); +#26483 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26484 = ORIENTED_EDGE('',*,*,#26435,.T.); +#26485 = ADVANCED_FACE('',(#26486),#26473,.T.); +#26486 = FACE_BOUND('',#26487,.T.); +#26487 = EDGE_LOOP('',(#26488,#26489,#26513,#26544)); +#26488 = ORIENTED_EDGE('',*,*,#26458,.T.); +#26489 = ORIENTED_EDGE('',*,*,#26490,.T.); +#26490 = EDGE_CURVE('',#26436,#26491,#26493,.T.); +#26491 = VERTEX_POINT('',#26492); +#26492 = CARTESIAN_POINT('',(-3.466666666667,4.245442237044E-16,0.65)); +#26493 = SEAM_CURVE('',#26494,(#26499,#26506),.PCURVE_S1.); +#26494 = CIRCLE('',#26495,0.533333333333); +#26495 = AXIS2_PLACEMENT_3D('',#26496,#26497,#26498); +#26496 = CARTESIAN_POINT('',(-3.466666666667,4.245442237044E-16, + 1.183333333333)); +#26497 = DIRECTION('',(-1.224646799147E-16,-1.,-0.)); +#26498 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#26499 = PCURVE('',#26473,#26500); +#26500 = DEFINITIONAL_REPRESENTATION('',(#26501),#26505); +#26501 = LINE('',#26502,#26503); +#26502 = CARTESIAN_POINT('',(6.28318530718,0.)); +#26503 = VECTOR('',#26504,1.); +#26504 = DIRECTION('',(0.,1.)); +#26505 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26506 = PCURVE('',#26473,#26507); +#26507 = DEFINITIONAL_REPRESENTATION('',(#26508),#26512); +#26508 = LINE('',#26509,#26510); +#26509 = CARTESIAN_POINT('',(0.,0.)); +#26510 = VECTOR('',#26511,1.); +#26511 = DIRECTION('',(0.,1.)); +#26512 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26513 = ORIENTED_EDGE('',*,*,#26514,.F.); +#26514 = EDGE_CURVE('',#26491,#26491,#26515,.T.); +#26515 = SURFACE_CURVE('',#26516,(#26521,#26528),.PCURVE_S1.); +#26516 = CIRCLE('',#26517,3.466666666667); +#26517 = AXIS2_PLACEMENT_3D('',#26518,#26519,#26520); +#26518 = CARTESIAN_POINT('',(0.,0.,0.65)); +#26519 = DIRECTION('',(0.,0.,-1.)); +#26520 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#26521 = PCURVE('',#26473,#26522); +#26522 = DEFINITIONAL_REPRESENTATION('',(#26523),#26527); +#26523 = LINE('',#26524,#26525); +#26524 = CARTESIAN_POINT('',(0.,1.570796326795)); +#26525 = VECTOR('',#26526,1.); +#26526 = DIRECTION('',(1.,0.)); +#26527 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26528 = PCURVE('',#26529,#26534); +#26529 = PLANE('',#26530); +#26530 = AXIS2_PLACEMENT_3D('',#26531,#26532,#26533); +#26531 = CARTESIAN_POINT('',(3.25580983938E-16,-1.541304320573E-16,0.65) + ); +#26532 = DIRECTION('',(1.863333581871E-33,1.245168191405E-33,1.)); +#26533 = DIRECTION('',(-1.,1.224646799147E-16,1.863333581871E-33)); +#26534 = DEFINITIONAL_REPRESENTATION('',(#26535),#26543); +#26535 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#26536,#26537,#26538,#26539 + ,#26540,#26541,#26542),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#26536 = CARTESIAN_POINT('',(3.466666666667,-1.541304320573E-16)); +#26537 = CARTESIAN_POINT('',(3.466666666667,-6.004442799573)); +#26538 = CARTESIAN_POINT('',(-1.733333333333,-3.002221399786)); +#26539 = CARTESIAN_POINT('',(-6.933333333334,-1.003218879466E-15)); +#26540 = CARTESIAN_POINT('',(-1.733333333334,3.002221399786)); +#26541 = CARTESIAN_POINT('',(3.466666666667,6.004442799573)); +#26542 = CARTESIAN_POINT('',(3.466666666667,-1.541304320573E-16)); +#26543 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26544 = ORIENTED_EDGE('',*,*,#26490,.F.); +#26545 = ADVANCED_FACE('',(#26546),#26385,.T.); +#26546 = FACE_BOUND('',#26547,.T.); +#26547 = EDGE_LOOP('',(#26548,#26571,#26634,#26635)); +#26548 = ORIENTED_EDGE('',*,*,#26549,.T.); +#26549 = EDGE_CURVE('',#26332,#26550,#26552,.T.); +#26550 = VERTEX_POINT('',#26551); +#26551 = CARTESIAN_POINT('',(-3.963636363636,4.854054585711E-16, + 2.401656321814)); +#26552 = SEAM_CURVE('',#26553,(#26557,#26564),.PCURVE_S1.); +#26553 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#26554,#26555,#26556), +.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(0., +25.132741228718),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1., +0.738548945876,1.)) REPRESENTATION_ITEM('') ); +#26554 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,2.361821953996)); +#26555 = CARTESIAN_POINT('',(-4.,-8.554193359611E-16,2.398336791163)); +#26556 = CARTESIAN_POINT('',(-3.963636363636,4.854054585711E-16, + 2.401656321814)); +#26557 = PCURVE('',#26385,#26558); +#26558 = DEFINITIONAL_REPRESENTATION('',(#26559),#26563); +#26559 = LINE('',#26560,#26561); +#26560 = CARTESIAN_POINT('',(1.299235425529E-13,0.)); +#26561 = VECTOR('',#26562,1.); +#26562 = DIRECTION('',(1.,0.)); +#26563 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26564 = PCURVE('',#26385,#26565); +#26565 = DEFINITIONAL_REPRESENTATION('',(#26566),#26570); +#26566 = LINE('',#26567,#26568); +#26567 = CARTESIAN_POINT('',(1.299235425529E-13,25.132741228718)); +#26568 = VECTOR('',#26569,1.); +#26569 = DIRECTION('',(1.,0.)); +#26570 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26571 = ORIENTED_EDGE('',*,*,#26572,.T.); +#26572 = EDGE_CURVE('',#26550,#26550,#26573,.T.); +#26573 = SURFACE_CURVE('',#26574,(#26589,#26596),.PCURVE_S1.); +#26574 = ( BOUNDED_CURVE() B_SPLINE_CURVE(13,(#26575,#26576,#26577, + #26578,#26579,#26580,#26581,#26582,#26583,#26584,#26585,#26586, +#26587,#26588),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,13,13 + ,1),(-25.13274122871,4.970488814277E-16,25.132741228718, +50.265482457436),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,1.,1.000000000001,0.999999999997, + 1.000000000006,0.999999999991,1.000000000009,0.999999999992, + 1.000000000006,0.999999999996,1.000000000002,0.999999999999,1.,1.)) +REPRESENTATION_ITEM('') ); +#26575 = CARTESIAN_POINT('',(-3.963636363636,4.854054585711E-16, + 2.401656321814)); +#26576 = CARTESIAN_POINT('',(-3.963636363638,1.888000315015, + 2.401656321814)); +#26577 = CARTESIAN_POINT('',(-2.987855509242,3.819539340071, + 2.401656321814)); +#26578 = CARTESIAN_POINT('',(-0.979835144066,5.200671926926, + 2.401656321814)); +#26579 = CARTESIAN_POINT('',(1.783455757208,5.412787571015, + 2.401656321814)); +#26580 = CARTESIAN_POINT('',(4.170610192188,3.940718857634, + 2.401656321814)); +#26581 = CARTESIAN_POINT('',(5.921337211393,1.791827409567, + 2.401656321814)); +#26582 = CARTESIAN_POINT('',(5.92133721145,-1.791827409597, + 2.401656321814)); +#26583 = CARTESIAN_POINT('',(4.170610192167,-3.940718857581, + 2.401656321814)); +#26584 = CARTESIAN_POINT('',(1.783455757199,-5.412787571062, + 2.401656321814)); +#26585 = CARTESIAN_POINT('',(-0.979835144047,-5.200671926904, + 2.401656321814)); +#26586 = CARTESIAN_POINT('',(-2.987855509253,-3.819539340077, + 2.401656321814)); +#26587 = CARTESIAN_POINT('',(-3.963636363636,-1.888000315014, + 2.401656321814)); +#26588 = CARTESIAN_POINT('',(-3.963636363636,4.854054585711E-16, + 2.401656321814)); +#26589 = PCURVE('',#26385,#26590); +#26590 = DEFINITIONAL_REPRESENTATION('',(#26591),#26595); +#26591 = LINE('',#26592,#26593); +#26592 = CARTESIAN_POINT('',(25.132741229136,0.)); +#26593 = VECTOR('',#26594,1.); +#26594 = DIRECTION('',(0.,1.)); +#26595 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26596 = PCURVE('',#26597,#26606); +#26597 = SURFACE_OF_REVOLUTION('',#26598,#26603); +#26598 = CIRCLE('',#26599,0.4); +#26599 = AXIS2_PLACEMENT_3D('',#26600,#26601,#26602); +#26600 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,2.8)); +#26601 = DIRECTION('',(-1.224646799147E-16,-1.,-0.)); +#26602 = DIRECTION('',(0.,0.,-1.)); +#26603 = AXIS1_PLACEMENT('',#26604,#26605); +#26604 = CARTESIAN_POINT('',(0.,0.,0.65)); +#26605 = DIRECTION('',(-0.,0.,-1.)); +#26606 = DEFINITIONAL_REPRESENTATION('',(#26607),#26633); +#26607 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#26608,#26609,#26610,#26611, + #26612,#26613,#26614,#26615,#26616,#26617,#26618,#26619,#26620, + #26621,#26622,#26623,#26624,#26625,#26626,#26627,#26628,#26629, + #26630,#26631,#26632),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1 + ,1,1,1,1,1,1,1,1,1,1,4),(4.970488814277E-16,1.142397328578, + 2.284794657156,3.427191985734,4.569589314312,5.71198664289, + 6.854383971469,7.996781300047,9.139178628625,10.281575957203, + 11.423973285781,12.566370614359,13.708767942937,14.851165271515, + 15.993562600093,17.135959928671,18.278357257249,19.420754585828, + 20.563151914406,21.705549242984,22.847946571562,23.99034390014, + 25.132741228718),.QUASI_UNIFORM_KNOTS.); +#26608 = CARTESIAN_POINT('',(0.,9.103477803822E-02)); +#26609 = CARTESIAN_POINT('',(9.385684572075E-02,9.110473955862E-02)); +#26610 = CARTESIAN_POINT('',(0.282615789764,9.111980714429E-02)); +#26611 = CARTESIAN_POINT('',(0.567874598603,9.097009903463E-02)); +#26612 = CARTESIAN_POINT('',(0.854108907278,9.102711027757E-02)); +#26613 = CARTESIAN_POINT('',(1.140627170535,9.105116784134E-02)); +#26614 = CARTESIAN_POINT('',(1.42701802633,9.104034292815E-02)); +#26615 = CARTESIAN_POINT('',(1.713151845887,9.10526885274E-02)); +#26616 = CARTESIAN_POINT('',(1.999044616411,9.104250836682E-02)); +#26617 = CARTESIAN_POINT('',(2.28476614771,9.10002783895E-02)); +#26618 = CARTESIAN_POINT('',(2.570394888575,9.099676042315E-02)); +#26619 = CARTESIAN_POINT('',(2.855993851066,9.105265152846E-02)); +#26620 = CARTESIAN_POINT('',(3.14159265359,9.108984213747E-02)); +#26621 = CARTESIAN_POINT('',(3.427191456113,9.10526515275E-02)); +#26622 = CARTESIAN_POINT('',(3.712790418604,9.099676042168E-02)); +#26623 = CARTESIAN_POINT('',(3.99841915947,9.100027838819E-02)); +#26624 = CARTESIAN_POINT('',(4.284140690769,9.104250836605E-02)); +#26625 = CARTESIAN_POINT('',(4.570033461293,9.105268852715E-02)); +#26626 = CARTESIAN_POINT('',(4.856167280849,9.104034292811E-02)); +#26627 = CARTESIAN_POINT('',(5.142558136645,9.105116784128E-02)); +#26628 = CARTESIAN_POINT('',(5.429076399901,9.102711027734E-02)); +#26629 = CARTESIAN_POINT('',(5.715310708576,9.0970099034E-02)); +#26630 = CARTESIAN_POINT('',(6.000569517416,9.111980714434E-02)); +#26631 = CARTESIAN_POINT('',(6.189328461459,9.110473955878E-02)); +#26632 = CARTESIAN_POINT('',(6.28318530718,9.103477803822E-02)); +#26633 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26634 = ORIENTED_EDGE('',*,*,#26549,.F.); +#26635 = ORIENTED_EDGE('',*,*,#26331,.F.); +#26636 = ADVANCED_FACE('',(#26637,#26867),#26529,.T.); +#26637 = FACE_BOUND('',#26638,.T.); +#26638 = EDGE_LOOP('',(#26639,#26669,#26698,#26726,#26755,#26783,#26812, + #26840)); +#26639 = ORIENTED_EDGE('',*,*,#26640,.T.); +#26640 = EDGE_CURVE('',#26641,#26643,#26645,.T.); +#26641 = VERTEX_POINT('',#26642); +#26642 = CARTESIAN_POINT('',(-4.15,0.646142399166,0.65)); +#26643 = VERTEX_POINT('',#26644); +#26644 = CARTESIAN_POINT('',(-4.15,-0.646142399166,0.65)); +#26645 = SURFACE_CURVE('',#26646,(#26650,#26657),.PCURVE_S1.); +#26646 = LINE('',#26647,#26648); +#26647 = CARTESIAN_POINT('',(-4.15,1.575,0.65)); +#26648 = VECTOR('',#26649,1.); +#26649 = DIRECTION('',(-1.224646799147E-16,-1.,1.245168191405E-33)); +#26650 = PCURVE('',#26529,#26651); +#26651 = DEFINITIONAL_REPRESENTATION('',(#26652),#26656); +#26652 = LINE('',#26653,#26654); +#26653 = CARTESIAN_POINT('',(4.15,-1.575)); +#26654 = VECTOR('',#26655,1.); +#26655 = DIRECTION('',(2.320163706123E-66,1.)); +#26656 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26657 = PCURVE('',#26658,#26663); +#26658 = PLANE('',#26659); +#26659 = AXIS2_PLACEMENT_3D('',#26660,#26661,#26662); +#26660 = CARTESIAN_POINT('',(-4.15,3.15,0.15)); +#26661 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#26662 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#26663 = DEFINITIONAL_REPRESENTATION('',(#26664),#26668); +#26664 = LINE('',#26665,#26666); +#26665 = CARTESIAN_POINT('',(1.575,-0.5)); +#26666 = VECTOR('',#26667,1.); +#26667 = DIRECTION('',(1.,-1.245168191405E-33)); +#26668 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26669 = ORIENTED_EDGE('',*,*,#26670,.T.); +#26670 = EDGE_CURVE('',#26643,#26671,#26673,.T.); +#26671 = VERTEX_POINT('',#26672); +#26672 = CARTESIAN_POINT('',(-0.646142399166,-4.15,0.65)); +#26673 = SURFACE_CURVE('',#26674,(#26679,#26686),.PCURVE_S1.); +#26674 = CIRCLE('',#26675,4.2); +#26675 = AXIS2_PLACEMENT_3D('',#26676,#26677,#26678); +#26676 = CARTESIAN_POINT('',(0.,0.,0.65)); +#26677 = DIRECTION('',(0.,0.,1.)); +#26678 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#26679 = PCURVE('',#26529,#26680); +#26680 = DEFINITIONAL_REPRESENTATION('',(#26681),#26685); +#26681 = CIRCLE('',#26682,4.2); +#26682 = AXIS2_PLACEMENT_2D('',#26683,#26684); +#26683 = CARTESIAN_POINT('',(3.25580983938E-16,-1.541304320573E-16)); +#26684 = DIRECTION('',(1.,2.320163706123E-66)); +#26685 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26686 = PCURVE('',#26687,#26692); +#26687 = CYLINDRICAL_SURFACE('',#26688,4.2); +#26688 = AXIS2_PLACEMENT_3D('',#26689,#26690,#26691); +#26689 = CARTESIAN_POINT('',(0.,0.,0.65)); +#26690 = DIRECTION('',(0.,0.,-1.)); +#26691 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#26692 = DEFINITIONAL_REPRESENTATION('',(#26693),#26697); +#26693 = LINE('',#26694,#26695); +#26694 = CARTESIAN_POINT('',(6.28318530718,0.)); +#26695 = VECTOR('',#26696,1.); +#26696 = DIRECTION('',(-1.,0.)); +#26697 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26698 = ORIENTED_EDGE('',*,*,#26699,.T.); +#26699 = EDGE_CURVE('',#26671,#26700,#26702,.T.); +#26700 = VERTEX_POINT('',#26701); +#26701 = CARTESIAN_POINT('',(0.646142399166,-4.15,0.65)); +#26702 = SURFACE_CURVE('',#26703,(#26707,#26714),.PCURVE_S1.); +#26703 = LINE('',#26704,#26705); +#26704 = CARTESIAN_POINT('',(-1.575,-4.15,0.65)); +#26705 = VECTOR('',#26706,1.); +#26706 = DIRECTION('',(1.,-1.224646799147E-16,-1.863333581871E-33)); +#26707 = PCURVE('',#26529,#26708); +#26708 = DEFINITIONAL_REPRESENTATION('',(#26709),#26713); +#26709 = LINE('',#26710,#26711); +#26710 = CARTESIAN_POINT('',(1.575,4.15)); +#26711 = VECTOR('',#26712,1.); +#26712 = DIRECTION('',(-1.,-2.320163706123E-66)); +#26713 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26714 = PCURVE('',#26715,#26720); +#26715 = PLANE('',#26716); +#26716 = AXIS2_PLACEMENT_3D('',#26717,#26718,#26719); +#26717 = CARTESIAN_POINT('',(-3.15,-4.15,0.15)); +#26718 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#26719 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#26720 = DEFINITIONAL_REPRESENTATION('',(#26721),#26725); +#26721 = LINE('',#26722,#26723); +#26722 = CARTESIAN_POINT('',(1.575,-0.5)); +#26723 = VECTOR('',#26724,1.); +#26724 = DIRECTION('',(1.,1.863333581871E-33)); +#26725 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26726 = ORIENTED_EDGE('',*,*,#26727,.T.); +#26727 = EDGE_CURVE('',#26700,#26728,#26730,.T.); +#26728 = VERTEX_POINT('',#26729); +#26729 = CARTESIAN_POINT('',(4.15,-0.646142399166,0.65)); +#26730 = SURFACE_CURVE('',#26731,(#26736,#26743),.PCURVE_S1.); +#26731 = CIRCLE('',#26732,4.2); +#26732 = AXIS2_PLACEMENT_3D('',#26733,#26734,#26735); +#26733 = CARTESIAN_POINT('',(0.,0.,0.65)); +#26734 = DIRECTION('',(0.,0.,1.)); +#26735 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#26736 = PCURVE('',#26529,#26737); +#26737 = DEFINITIONAL_REPRESENTATION('',(#26738),#26742); +#26738 = CIRCLE('',#26739,4.2); +#26739 = AXIS2_PLACEMENT_2D('',#26740,#26741); +#26740 = CARTESIAN_POINT('',(3.25580983938E-16,-1.541304320573E-16)); +#26741 = DIRECTION('',(1.,2.320163706123E-66)); +#26742 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26743 = PCURVE('',#26744,#26749); +#26744 = CYLINDRICAL_SURFACE('',#26745,4.2); +#26745 = AXIS2_PLACEMENT_3D('',#26746,#26747,#26748); +#26746 = CARTESIAN_POINT('',(0.,0.,0.65)); +#26747 = DIRECTION('',(0.,0.,-1.)); +#26748 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#26749 = DEFINITIONAL_REPRESENTATION('',(#26750),#26754); +#26750 = LINE('',#26751,#26752); +#26751 = CARTESIAN_POINT('',(6.28318530718,0.)); +#26752 = VECTOR('',#26753,1.); +#26753 = DIRECTION('',(-1.,0.)); +#26754 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26755 = ORIENTED_EDGE('',*,*,#26756,.T.); +#26756 = EDGE_CURVE('',#26728,#26757,#26759,.T.); +#26757 = VERTEX_POINT('',#26758); +#26758 = CARTESIAN_POINT('',(4.15,0.646142399166,0.65)); +#26759 = SURFACE_CURVE('',#26760,(#26764,#26771),.PCURVE_S1.); +#26760 = LINE('',#26761,#26762); +#26761 = CARTESIAN_POINT('',(4.15,-2.075,0.65)); +#26762 = VECTOR('',#26763,1.); +#26763 = DIRECTION('',(1.224646799147E-16,1.,-1.245168191405E-33)); +#26764 = PCURVE('',#26529,#26765); +#26765 = DEFINITIONAL_REPRESENTATION('',(#26766),#26770); +#26766 = LINE('',#26767,#26768); +#26767 = CARTESIAN_POINT('',(-4.15,2.075)); +#26768 = VECTOR('',#26769,1.); +#26769 = DIRECTION('',(-2.320163706123E-66,-1.)); +#26770 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26771 = PCURVE('',#26772,#26777); +#26772 = PLANE('',#26773); +#26773 = AXIS2_PLACEMENT_3D('',#26774,#26775,#26776); +#26774 = CARTESIAN_POINT('',(4.15,-4.15,0.15)); +#26775 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#26776 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#26777 = DEFINITIONAL_REPRESENTATION('',(#26778),#26782); +#26778 = LINE('',#26779,#26780); +#26779 = CARTESIAN_POINT('',(2.075,-0.5)); +#26780 = VECTOR('',#26781,1.); +#26781 = DIRECTION('',(1.,1.245168191405E-33)); +#26782 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26783 = ORIENTED_EDGE('',*,*,#26784,.T.); +#26784 = EDGE_CURVE('',#26757,#26785,#26787,.T.); +#26785 = VERTEX_POINT('',#26786); +#26786 = CARTESIAN_POINT('',(0.646142399166,4.15,0.65)); +#26787 = SURFACE_CURVE('',#26788,(#26793,#26800),.PCURVE_S1.); +#26788 = CIRCLE('',#26789,4.2); +#26789 = AXIS2_PLACEMENT_3D('',#26790,#26791,#26792); +#26790 = CARTESIAN_POINT('',(0.,0.,0.65)); +#26791 = DIRECTION('',(0.,0.,1.)); +#26792 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#26793 = PCURVE('',#26529,#26794); +#26794 = DEFINITIONAL_REPRESENTATION('',(#26795),#26799); +#26795 = CIRCLE('',#26796,4.2); +#26796 = AXIS2_PLACEMENT_2D('',#26797,#26798); +#26797 = CARTESIAN_POINT('',(3.25580983938E-16,-1.541304320573E-16)); +#26798 = DIRECTION('',(1.,2.320163706123E-66)); +#26799 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26800 = PCURVE('',#26801,#26806); +#26801 = CYLINDRICAL_SURFACE('',#26802,4.2); +#26802 = AXIS2_PLACEMENT_3D('',#26803,#26804,#26805); +#26803 = CARTESIAN_POINT('',(0.,0.,0.65)); +#26804 = DIRECTION('',(0.,0.,-1.)); +#26805 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#26806 = DEFINITIONAL_REPRESENTATION('',(#26807),#26811); +#26807 = LINE('',#26808,#26809); +#26808 = CARTESIAN_POINT('',(6.28318530718,0.)); +#26809 = VECTOR('',#26810,1.); +#26810 = DIRECTION('',(-1.,0.)); +#26811 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26812 = ORIENTED_EDGE('',*,*,#26813,.T.); +#26813 = EDGE_CURVE('',#26785,#26814,#26816,.T.); +#26814 = VERTEX_POINT('',#26815); +#26815 = CARTESIAN_POINT('',(-0.646142399166,4.15,0.65)); +#26816 = SURFACE_CURVE('',#26817,(#26821,#26828),.PCURVE_S1.); +#26817 = LINE('',#26818,#26819); +#26818 = CARTESIAN_POINT('',(2.075,4.15,0.65)); +#26819 = VECTOR('',#26820,1.); +#26820 = DIRECTION('',(-1.,1.224646799147E-16,1.863333581871E-33)); +#26821 = PCURVE('',#26529,#26822); +#26822 = DEFINITIONAL_REPRESENTATION('',(#26823),#26827); +#26823 = LINE('',#26824,#26825); +#26824 = CARTESIAN_POINT('',(-2.075,-4.15)); +#26825 = VECTOR('',#26826,1.); +#26826 = DIRECTION('',(1.,2.320163706123E-66)); +#26827 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26828 = PCURVE('',#26829,#26834); +#26829 = PLANE('',#26830); +#26830 = AXIS2_PLACEMENT_3D('',#26831,#26832,#26833); +#26831 = CARTESIAN_POINT('',(4.15,4.15,0.15)); +#26832 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#26833 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#26834 = DEFINITIONAL_REPRESENTATION('',(#26835),#26839); +#26835 = LINE('',#26836,#26837); +#26836 = CARTESIAN_POINT('',(2.075,-0.5)); +#26837 = VECTOR('',#26838,1.); +#26838 = DIRECTION('',(1.,-1.863333581871E-33)); +#26839 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26840 = ORIENTED_EDGE('',*,*,#26841,.T.); +#26841 = EDGE_CURVE('',#26814,#26641,#26842,.T.); +#26842 = SURFACE_CURVE('',#26843,(#26848,#26855),.PCURVE_S1.); +#26843 = CIRCLE('',#26844,4.2); +#26844 = AXIS2_PLACEMENT_3D('',#26845,#26846,#26847); +#26845 = CARTESIAN_POINT('',(0.,0.,0.65)); +#26846 = DIRECTION('',(0.,0.,1.)); +#26847 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#26848 = PCURVE('',#26529,#26849); +#26849 = DEFINITIONAL_REPRESENTATION('',(#26850),#26854); +#26850 = CIRCLE('',#26851,4.2); +#26851 = AXIS2_PLACEMENT_2D('',#26852,#26853); +#26852 = CARTESIAN_POINT('',(3.25580983938E-16,-1.541304320573E-16)); +#26853 = DIRECTION('',(1.,2.320163706123E-66)); +#26854 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26855 = PCURVE('',#26856,#26861); +#26856 = CYLINDRICAL_SURFACE('',#26857,4.2); +#26857 = AXIS2_PLACEMENT_3D('',#26858,#26859,#26860); +#26858 = CARTESIAN_POINT('',(0.,0.,0.65)); +#26859 = DIRECTION('',(0.,0.,-1.)); +#26860 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#26861 = DEFINITIONAL_REPRESENTATION('',(#26862),#26866); +#26862 = LINE('',#26863,#26864); +#26863 = CARTESIAN_POINT('',(6.28318530718,0.)); +#26864 = VECTOR('',#26865,1.); +#26865 = DIRECTION('',(-1.,0.)); +#26866 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26867 = FACE_BOUND('',#26868,.T.); +#26868 = EDGE_LOOP('',(#26869)); +#26869 = ORIENTED_EDGE('',*,*,#26514,.T.); +#26870 = ADVANCED_FACE('',(#26871),#26597,.F.); +#26871 = FACE_BOUND('',#26872,.F.); +#26872 = EDGE_LOOP('',(#26873,#26897,#26898,#26899)); +#26873 = ORIENTED_EDGE('',*,*,#26874,.F.); +#26874 = EDGE_CURVE('',#26550,#26875,#26877,.T.); +#26875 = VERTEX_POINT('',#26876); +#26876 = CARTESIAN_POINT('',(-3.963636363636,4.854054585711E-16, + 3.198343678186)); +#26877 = SEAM_CURVE('',#26878,(#26883,#26890),.PCURVE_S1.); +#26878 = CIRCLE('',#26879,0.4); +#26879 = AXIS2_PLACEMENT_3D('',#26880,#26881,#26882); +#26880 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,2.8)); +#26881 = DIRECTION('',(-1.224646799147E-16,-1.,-0.)); +#26882 = DIRECTION('',(0.,0.,-1.)); +#26883 = PCURVE('',#26597,#26884); +#26884 = DEFINITIONAL_REPRESENTATION('',(#26885),#26889); +#26885 = LINE('',#26886,#26887); +#26886 = CARTESIAN_POINT('',(0.,3.330669073875E-16)); +#26887 = VECTOR('',#26888,1.); +#26888 = DIRECTION('',(0.,1.)); +#26889 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26890 = PCURVE('',#26597,#26891); +#26891 = DEFINITIONAL_REPRESENTATION('',(#26892),#26896); +#26892 = LINE('',#26893,#26894); +#26893 = CARTESIAN_POINT('',(6.28318530718,3.330669073875E-16)); +#26894 = VECTOR('',#26895,1.); +#26895 = DIRECTION('',(0.,1.)); +#26896 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26897 = ORIENTED_EDGE('',*,*,#26572,.T.); +#26898 = ORIENTED_EDGE('',*,*,#26874,.T.); +#26899 = ORIENTED_EDGE('',*,*,#26900,.F.); +#26900 = EDGE_CURVE('',#26875,#26875,#26901,.T.); +#26901 = SURFACE_CURVE('',#26902,(#26917,#26946),.PCURVE_S1.); +#26902 = ( BOUNDED_CURVE() B_SPLINE_CURVE(13,(#26903,#26904,#26905, + #26906,#26907,#26908,#26909,#26910,#26911,#26912,#26913,#26914, +#26915,#26916),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,13,13 + ,1),(-25.13274122871,4.970488814277E-16,25.132741228718, +50.265482457436),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,1.,1.000000000001,0.999999999997, + 1.000000000006,0.999999999991,1.000000000009,0.999999999992, + 1.000000000006,0.999999999996,1.000000000002,0.999999999999,1.,1.)) +REPRESENTATION_ITEM('') ); +#26903 = CARTESIAN_POINT('',(-3.963636363636,4.854054585711E-16, + 3.198343678186)); +#26904 = CARTESIAN_POINT('',(-3.963636363638,1.888000315015, + 3.198343678186)); +#26905 = CARTESIAN_POINT('',(-2.987855509243,3.819539340071, + 3.198343678186)); +#26906 = CARTESIAN_POINT('',(-0.979835144063,5.200671926927, + 3.198343678186)); +#26907 = CARTESIAN_POINT('',(1.783455757203,5.412787571013, + 3.198343678186)); +#26908 = CARTESIAN_POINT('',(4.170610192196,3.940718857636, + 3.198343678186)); +#26909 = CARTESIAN_POINT('',(5.921337211382,1.791827409565, + 3.198343678186)); +#26910 = CARTESIAN_POINT('',(5.921337211463,-1.791827409596, + 3.198343678186)); +#26911 = CARTESIAN_POINT('',(4.170610192156,-3.940718857582, + 3.198343678186)); +#26912 = CARTESIAN_POINT('',(1.783455757206,-5.412787571061, + 3.198343678186)); +#26913 = CARTESIAN_POINT('',(-0.979835144051,-5.200671926904, + 3.198343678186)); +#26914 = CARTESIAN_POINT('',(-2.987855509251,-3.819539340077, + 3.198343678186)); +#26915 = CARTESIAN_POINT('',(-3.963636363636,-1.888000315014, + 3.198343678186)); +#26916 = CARTESIAN_POINT('',(-3.963636363636,4.854054585711E-16, + 3.198343678186)); +#26917 = PCURVE('',#26597,#26918); +#26918 = DEFINITIONAL_REPRESENTATION('',(#26919),#26945); +#26919 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#26920,#26921,#26922,#26923, + #26924,#26925,#26926,#26927,#26928,#26929,#26930,#26931,#26932, + #26933,#26934,#26935,#26936,#26937,#26938,#26939,#26940,#26941, + #26942,#26943,#26944),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1 + ,1,1,1,1,1,1,1,1,1,1,4),(4.970488814277E-16,1.142397328578, + 2.284794657156,3.427191985734,4.569589314312,5.71198664289, + 6.854383971469,7.996781300047,9.139178628625,10.281575957203, + 11.423973285781,12.566370614359,13.708767942937,14.851165271515, + 15.993562600093,17.135959928671,18.278357257249,19.420754585828, + 20.563151914406,21.705549242984,22.847946571562,23.99034390014, + 25.132741228718),.QUASI_UNIFORM_KNOTS.); +#26920 = CARTESIAN_POINT('',(0.,3.050557875552)); +#26921 = CARTESIAN_POINT('',(9.385684572075E-02,3.050487914031)); +#26922 = CARTESIAN_POINT('',(0.282615789764,3.050472846446)); +#26923 = CARTESIAN_POINT('',(0.567874598603,3.050622554555)); +#26924 = CARTESIAN_POINT('',(0.854108907278,3.050565543312)); +#26925 = CARTESIAN_POINT('',(1.140627170535,3.050541485749)); +#26926 = CARTESIAN_POINT('',(1.42701802633,3.050552310662)); +#26927 = CARTESIAN_POINT('',(1.713151845887,3.050539965062)); +#26928 = CARTESIAN_POINT('',(1.999044616411,3.050550145223)); +#26929 = CARTESIAN_POINT('',(2.28476614771,3.0505923752)); +#26930 = CARTESIAN_POINT('',(2.570394888575,3.050595893167)); +#26931 = CARTESIAN_POINT('',(2.855993851066,3.050540002062)); +#26932 = CARTESIAN_POINT('',(3.14159265359,3.050502811453)); +#26933 = CARTESIAN_POINT('',(3.427191456113,3.050540002063)); +#26934 = CARTESIAN_POINT('',(3.712790418604,3.050595893168)); +#26935 = CARTESIAN_POINT('',(3.99841915947,3.050592375202)); +#26936 = CARTESIAN_POINT('',(4.284140690769,3.050550145224)); +#26937 = CARTESIAN_POINT('',(4.570033461293,3.050539965062)); +#26938 = CARTESIAN_POINT('',(4.856167280849,3.050552310661)); +#26939 = CARTESIAN_POINT('',(5.142558136645,3.050541485748)); +#26940 = CARTESIAN_POINT('',(5.429076399901,3.050565543312)); +#26941 = CARTESIAN_POINT('',(5.715310708576,3.050622554555)); +#26942 = CARTESIAN_POINT('',(6.000569517416,3.050472846445)); +#26943 = CARTESIAN_POINT('',(6.189328461459,3.050487914031)); +#26944 = CARTESIAN_POINT('',(6.28318530718,3.050557875552)); +#26945 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26946 = PCURVE('',#26947,#26990); +#26947 = ( BOUNDED_SURFACE() B_SPLINE_SURFACE(2,13,( + (#26948,#26949,#26950,#26951,#26952,#26953,#26954,#26955,#26956 + ,#26957,#26958,#26959,#26960,#26961) + ,(#26962,#26963,#26964,#26965,#26966,#26967,#26968,#26969,#26970 + ,#26971,#26972,#26973,#26974,#26975) + ,(#26976,#26977,#26978,#26979,#26980,#26981,#26982,#26983,#26984 + ,#26985,#26986,#26987,#26988,#26989 +)),.UNSPECIFIED.,.F.,.T.,.F.) B_SPLINE_SURFACE_WITH_KNOTS((3,3),(1,13,13 + ,1),(0.,25.132741228718),(-25.13274122871,4.970488814277E-16, + 25.132741228718,50.265482457436),.UNSPECIFIED.) +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_SURFACE(( + (1.,1.,1.000000000001,0.999999999997,1.000000000006,0.999999999991 + ,1.000000000009,0.999999999992,1.000000000006,0.999999999996 + ,1.000000000002,0.999999999999,1.,1.) + ,(0.738548945876,0.738548945876,0.738548945877,0.738548945873 + ,0.738548945882,0.738548945867,0.738548945886,0.738548945867 + ,0.738548945883,0.738548945872,0.738548945878,0.738548945875 + ,0.738548945876,0.738548945876) + ,(1.,1.,1.000000000001,0.999999999997,1.000000000006,0.999999999991 + ,1.000000000009,0.999999999992,1.000000000006,0.999999999996 +,1.000000000002,0.999999999999,1.,1. + ))) REPRESENTATION_ITEM('') SURFACE() ); +#26948 = CARTESIAN_POINT('',(-3.963636363636,4.854054585711E-16, + 3.198343678186)); +#26949 = CARTESIAN_POINT('',(-3.963636363638,1.888000315015, + 3.198343678186)); +#26950 = CARTESIAN_POINT('',(-2.987855509243,3.819539340071, + 3.198343678186)); +#26951 = CARTESIAN_POINT('',(-0.979835144063,5.200671926927, + 3.198343678186)); +#26952 = CARTESIAN_POINT('',(1.783455757203,5.412787571013, + 3.198343678186)); +#26953 = CARTESIAN_POINT('',(4.170610192196,3.940718857636, + 3.198343678186)); +#26954 = CARTESIAN_POINT('',(5.921337211382,1.791827409565, + 3.198343678186)); +#26955 = CARTESIAN_POINT('',(5.921337211463,-1.791827409596, + 3.198343678186)); +#26956 = CARTESIAN_POINT('',(4.170610192156,-3.940718857582, + 3.198343678186)); +#26957 = CARTESIAN_POINT('',(1.783455757206,-5.412787571061, + 3.198343678186)); +#26958 = CARTESIAN_POINT('',(-0.979835144051,-5.200671926904, + 3.198343678186)); +#26959 = CARTESIAN_POINT('',(-2.987855509251,-3.819539340077, + 3.198343678186)); +#26960 = CARTESIAN_POINT('',(-3.963636363636,-1.888000315014, + 3.198343678186)); +#26961 = CARTESIAN_POINT('',(-3.963636363636,4.854054585711E-16, + 3.198343678186)); +#26962 = CARTESIAN_POINT('',(-4.,1.639980384232E-15,3.201663208837)); +#26963 = CARTESIAN_POINT('',(-4.000000000002,1.905321418822, + 3.201663208837)); +#26964 = CARTESIAN_POINT('',(-3.015267027676,3.854580985393, + 3.201663208837)); +#26965 = CARTESIAN_POINT('',(-0.988824457308,5.248384513415, + 3.201663208837)); +#26966 = CARTESIAN_POINT('',(1.799817736614,5.462446172577, + 3.201663208837)); +#26967 = CARTESIAN_POINT('',(4.208872671052,3.976872241654, + 3.201663208837)); +#26968 = CARTESIAN_POINT('',(5.975661405941,1.808266193144, + 3.201663208837)); +#26969 = CARTESIAN_POINT('',(5.975661406102,-1.808266193189, + 3.201663208837)); +#26970 = CARTESIAN_POINT('',(4.20887267096,-3.976872241576, + 3.201663208837)); +#26971 = CARTESIAN_POINT('',(1.79981773664,-5.462446172645, + 3.201663208837)); +#26972 = CARTESIAN_POINT('',(-0.988824457302,-5.248384513383, + 3.201663208837)); +#26973 = CARTESIAN_POINT('',(-3.015267027684,-3.854580985401, + 3.201663208837)); +#26974 = CARTESIAN_POINT('',(-4.,-1.905321418822,3.201663208837)); +#26975 = CARTESIAN_POINT('',(-4.,1.639980384232E-15,3.201663208837)); +#26976 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,3.238178046004)); +#26977 = CARTESIAN_POINT('',(-4.000000000001,1.905321418822, + 3.238178046004)); +#26978 = CARTESIAN_POINT('',(-3.015267027679,3.854580985394, + 3.238178046004)); +#26979 = CARTESIAN_POINT('',(-0.988824457305,5.248384513409, + 3.238178046004)); +#26980 = CARTESIAN_POINT('',(1.799817736615,5.462446172588, + 3.238178046004)); +#26981 = CARTESIAN_POINT('',(4.208872671042,3.976872241642, + 3.238178046004)); +#26982 = CARTESIAN_POINT('',(5.97566140596,1.80826619315,3.238178046004) + ); +#26983 = CARTESIAN_POINT('',(5.975661406084,-1.808266193181, + 3.238178046004)); +#26984 = CARTESIAN_POINT('',(4.208872670967,-3.976872241588, + 3.238178046004)); +#26985 = CARTESIAN_POINT('',(1.79981773664,-5.462446172636, + 3.238178046004)); +#26986 = CARTESIAN_POINT('',(-0.988824457304,-5.248384513387, + 3.238178046004)); +#26987 = CARTESIAN_POINT('',(-3.015267027683,-3.8545809854, + 3.238178046004)); +#26988 = CARTESIAN_POINT('',(-4.,-1.905321418822,3.238178046004)); +#26989 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,3.238178046004)); +#26990 = DEFINITIONAL_REPRESENTATION('',(#26991),#26995); +#26991 = LINE('',#26992,#26993); +#26992 = CARTESIAN_POINT('',(7.016123852284E-13,-4.970488814277E-16)); +#26993 = VECTOR('',#26994,1.); +#26994 = DIRECTION('',(0.,1.)); +#26995 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#26996 = ADVANCED_FACE('',(#26997),#26658,.F.); +#26997 = FACE_BOUND('',#26998,.F.); +#26998 = EDGE_LOOP('',(#26999,#27029,#27057,#27085,#27106,#27107,#27130, + #27158,#27186,#27209)); +#26999 = ORIENTED_EDGE('',*,*,#27000,.F.); +#27000 = EDGE_CURVE('',#27001,#27003,#27005,.T.); +#27001 = VERTEX_POINT('',#27002); +#27002 = CARTESIAN_POINT('',(-4.15,3.15,0.15)); +#27003 = VERTEX_POINT('',#27004); +#27004 = CARTESIAN_POINT('',(-4.15,0.325,0.15)); +#27005 = SURFACE_CURVE('',#27006,(#27010,#27017),.PCURVE_S1.); +#27006 = LINE('',#27007,#27008); +#27007 = CARTESIAN_POINT('',(-4.15,3.15,0.15)); +#27008 = VECTOR('',#27009,1.); +#27009 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#27010 = PCURVE('',#26658,#27011); +#27011 = DEFINITIONAL_REPRESENTATION('',(#27012),#27016); +#27012 = LINE('',#27013,#27014); +#27013 = CARTESIAN_POINT('',(0.,0.)); +#27014 = VECTOR('',#27015,1.); +#27015 = DIRECTION('',(1.,0.)); +#27016 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27017 = PCURVE('',#27018,#27023); +#27018 = PLANE('',#27019); +#27019 = AXIS2_PLACEMENT_3D('',#27020,#27021,#27022); +#27020 = CARTESIAN_POINT('',(0.164736188078,9.074939905459E-17,0.15)); +#27021 = DIRECTION('',(-6.300542223781E-34,7.715938867246E-50,1.)); +#27022 = DIRECTION('',(-1.,1.224646799147E-16,-6.300542223781E-34)); +#27023 = DEFINITIONAL_REPRESENTATION('',(#27024),#27028); +#27024 = LINE('',#27025,#27026); +#27025 = CARTESIAN_POINT('',(4.314736188078,-3.15)); +#27026 = VECTOR('',#27027,1.); +#27027 = DIRECTION('',(-1.308421422143E-95,1.)); +#27028 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27029 = ORIENTED_EDGE('',*,*,#27030,.T.); +#27030 = EDGE_CURVE('',#27001,#27031,#27033,.T.); +#27031 = VERTEX_POINT('',#27032); +#27032 = CARTESIAN_POINT('',(-4.15,3.15,0.85)); +#27033 = SURFACE_CURVE('',#27034,(#27038,#27045),.PCURVE_S1.); +#27034 = LINE('',#27035,#27036); +#27035 = CARTESIAN_POINT('',(-4.15,3.15,0.15)); +#27036 = VECTOR('',#27037,1.); +#27037 = DIRECTION('',(0.,0.,1.)); +#27038 = PCURVE('',#26658,#27039); +#27039 = DEFINITIONAL_REPRESENTATION('',(#27040),#27044); +#27040 = LINE('',#27041,#27042); +#27041 = CARTESIAN_POINT('',(0.,0.)); +#27042 = VECTOR('',#27043,1.); +#27043 = DIRECTION('',(0.,-1.)); +#27044 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27045 = PCURVE('',#27046,#27051); +#27046 = PLANE('',#27047); +#27047 = AXIS2_PLACEMENT_3D('',#27048,#27049,#27050); +#27048 = CARTESIAN_POINT('',(-3.15,4.15,0.15)); +#27049 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#27050 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#27051 = DEFINITIONAL_REPRESENTATION('',(#27052),#27056); +#27052 = LINE('',#27053,#27054); +#27053 = CARTESIAN_POINT('',(1.414213562373,0.)); +#27054 = VECTOR('',#27055,1.); +#27055 = DIRECTION('',(0.,-1.)); +#27056 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27057 = ORIENTED_EDGE('',*,*,#27058,.T.); +#27058 = EDGE_CURVE('',#27031,#27059,#27061,.T.); +#27059 = VERTEX_POINT('',#27060); +#27060 = CARTESIAN_POINT('',(-4.15,0.646142399166,0.85)); +#27061 = SURFACE_CURVE('',#27062,(#27066,#27073),.PCURVE_S1.); +#27062 = LINE('',#27063,#27064); +#27063 = CARTESIAN_POINT('',(-4.15,4.15,0.85)); +#27064 = VECTOR('',#27065,1.); +#27065 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#27066 = PCURVE('',#26658,#27067); +#27067 = DEFINITIONAL_REPRESENTATION('',(#27068),#27072); +#27068 = LINE('',#27069,#27070); +#27069 = CARTESIAN_POINT('',(-1.,-0.7)); +#27070 = VECTOR('',#27071,1.); +#27071 = DIRECTION('',(1.,0.)); +#27072 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27073 = PCURVE('',#27074,#27079); +#27074 = PLANE('',#27075); +#27075 = AXIS2_PLACEMENT_3D('',#27076,#27077,#27078); +#27076 = CARTESIAN_POINT('',(5.082284216462E-16,4.15,0.85)); +#27077 = DIRECTION('',(0.,0.,1.)); +#27078 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#27079 = DEFINITIONAL_REPRESENTATION('',(#27080),#27084); +#27080 = LINE('',#27081,#27082); +#27081 = CARTESIAN_POINT('',(4.15,5.08228421646E-16)); +#27082 = VECTOR('',#27083,1.); +#27083 = DIRECTION('',(0.,1.)); +#27084 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27085 = ORIENTED_EDGE('',*,*,#27086,.T.); +#27086 = EDGE_CURVE('',#27059,#26641,#27087,.T.); +#27087 = SURFACE_CURVE('',#27088,(#27092,#27099),.PCURVE_S1.); +#27088 = LINE('',#27089,#27090); +#27089 = CARTESIAN_POINT('',(-4.15,0.646142399166,0.65)); +#27090 = VECTOR('',#27091,1.); +#27091 = DIRECTION('',(0.,0.,-1.)); +#27092 = PCURVE('',#26658,#27093); +#27093 = DEFINITIONAL_REPRESENTATION('',(#27094),#27098); +#27094 = LINE('',#27095,#27096); +#27095 = CARTESIAN_POINT('',(2.503857600834,-0.5)); +#27096 = VECTOR('',#27097,1.); +#27097 = DIRECTION('',(-0.,1.)); +#27098 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27099 = PCURVE('',#26856,#27100); +#27100 = DEFINITIONAL_REPRESENTATION('',(#27101),#27105); +#27101 = LINE('',#27102,#27103); +#27102 = CARTESIAN_POINT('',(0.154456840173,0.)); +#27103 = VECTOR('',#27104,1.); +#27104 = DIRECTION('',(0.,1.)); +#27105 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27106 = ORIENTED_EDGE('',*,*,#26640,.T.); +#27107 = ORIENTED_EDGE('',*,*,#27108,.F.); +#27108 = EDGE_CURVE('',#27109,#26643,#27111,.T.); +#27109 = VERTEX_POINT('',#27110); +#27110 = CARTESIAN_POINT('',(-4.15,-0.646142399166,0.85)); +#27111 = SURFACE_CURVE('',#27112,(#27116,#27123),.PCURVE_S1.); +#27112 = LINE('',#27113,#27114); +#27113 = CARTESIAN_POINT('',(-4.15,-0.646142399166,0.65)); +#27114 = VECTOR('',#27115,1.); +#27115 = DIRECTION('',(0.,0.,-1.)); +#27116 = PCURVE('',#26658,#27117); +#27117 = DEFINITIONAL_REPRESENTATION('',(#27118),#27122); +#27118 = LINE('',#27119,#27120); +#27119 = CARTESIAN_POINT('',(3.796142399166,-0.5)); +#27120 = VECTOR('',#27121,1.); +#27121 = DIRECTION('',(-0.,1.)); +#27122 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27123 = PCURVE('',#26687,#27124); +#27124 = DEFINITIONAL_REPRESENTATION('',(#27125),#27129); +#27125 = LINE('',#27126,#27127); +#27126 = CARTESIAN_POINT('',(6.128728467006,0.)); +#27127 = VECTOR('',#27128,1.); +#27128 = DIRECTION('',(0.,1.)); +#27129 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27130 = ORIENTED_EDGE('',*,*,#27131,.T.); +#27131 = EDGE_CURVE('',#27109,#27132,#27134,.T.); +#27132 = VERTEX_POINT('',#27133); +#27133 = CARTESIAN_POINT('',(-4.15,-3.15,0.85)); +#27134 = SURFACE_CURVE('',#27135,(#27139,#27146),.PCURVE_S1.); +#27135 = LINE('',#27136,#27137); +#27136 = CARTESIAN_POINT('',(-4.15,4.15,0.85)); +#27137 = VECTOR('',#27138,1.); +#27138 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#27139 = PCURVE('',#26658,#27140); +#27140 = DEFINITIONAL_REPRESENTATION('',(#27141),#27145); +#27141 = LINE('',#27142,#27143); +#27142 = CARTESIAN_POINT('',(-1.,-0.7)); +#27143 = VECTOR('',#27144,1.); +#27144 = DIRECTION('',(1.,0.)); +#27145 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27146 = PCURVE('',#27147,#27152); +#27147 = PLANE('',#27148); +#27148 = AXIS2_PLACEMENT_3D('',#27149,#27150,#27151); +#27149 = CARTESIAN_POINT('',(5.082284216462E-16,4.15,0.85)); +#27150 = DIRECTION('',(0.,0.,1.)); +#27151 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#27152 = DEFINITIONAL_REPRESENTATION('',(#27153),#27157); +#27153 = LINE('',#27154,#27155); +#27154 = CARTESIAN_POINT('',(4.15,5.08228421646E-16)); +#27155 = VECTOR('',#27156,1.); +#27156 = DIRECTION('',(0.,1.)); +#27157 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27158 = ORIENTED_EDGE('',*,*,#27159,.F.); +#27159 = EDGE_CURVE('',#27160,#27132,#27162,.T.); +#27160 = VERTEX_POINT('',#27161); +#27161 = CARTESIAN_POINT('',(-4.15,-3.15,0.15)); +#27162 = SURFACE_CURVE('',#27163,(#27167,#27174),.PCURVE_S1.); +#27163 = LINE('',#27164,#27165); +#27164 = CARTESIAN_POINT('',(-4.15,-3.15,0.15)); +#27165 = VECTOR('',#27166,1.); +#27166 = DIRECTION('',(0.,0.,1.)); +#27167 = PCURVE('',#26658,#27168); +#27168 = DEFINITIONAL_REPRESENTATION('',(#27169),#27173); +#27169 = LINE('',#27170,#27171); +#27170 = CARTESIAN_POINT('',(6.3,0.)); +#27171 = VECTOR('',#27172,1.); +#27172 = DIRECTION('',(0.,-1.)); +#27173 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27174 = PCURVE('',#27175,#27180); +#27175 = PLANE('',#27176); +#27176 = AXIS2_PLACEMENT_3D('',#27177,#27178,#27179); +#27177 = CARTESIAN_POINT('',(-4.15,-3.15,0.15)); +#27178 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#27179 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#27180 = DEFINITIONAL_REPRESENTATION('',(#27181),#27185); +#27181 = LINE('',#27182,#27183); +#27182 = CARTESIAN_POINT('',(0.,0.)); +#27183 = VECTOR('',#27184,1.); +#27184 = DIRECTION('',(0.,-1.)); +#27185 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27186 = ORIENTED_EDGE('',*,*,#27187,.F.); +#27187 = EDGE_CURVE('',#27188,#27160,#27190,.T.); +#27188 = VERTEX_POINT('',#27189); +#27189 = CARTESIAN_POINT('',(-4.15,-0.325,0.15)); +#27190 = SURFACE_CURVE('',#27191,(#27195,#27202),.PCURVE_S1.); +#27191 = LINE('',#27192,#27193); +#27192 = CARTESIAN_POINT('',(-4.15,3.15,0.15)); +#27193 = VECTOR('',#27194,1.); +#27194 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#27195 = PCURVE('',#26658,#27196); +#27196 = DEFINITIONAL_REPRESENTATION('',(#27197),#27201); +#27197 = LINE('',#27198,#27199); +#27198 = CARTESIAN_POINT('',(0.,0.)); +#27199 = VECTOR('',#27200,1.); +#27200 = DIRECTION('',(1.,0.)); +#27201 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27202 = PCURVE('',#27018,#27203); +#27203 = DEFINITIONAL_REPRESENTATION('',(#27204),#27208); +#27204 = LINE('',#27205,#27206); +#27205 = CARTESIAN_POINT('',(4.314736188078,-3.15)); +#27206 = VECTOR('',#27207,1.); +#27207 = DIRECTION('',(-1.308421422143E-95,1.)); +#27208 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27209 = ORIENTED_EDGE('',*,*,#27210,.F.); +#27210 = EDGE_CURVE('',#27003,#27188,#27211,.T.); +#27211 = SURFACE_CURVE('',#27212,(#27216,#27223),.PCURVE_S1.); +#27212 = LINE('',#27213,#27214); +#27213 = CARTESIAN_POINT('',(-4.15,3.15,0.15)); +#27214 = VECTOR('',#27215,1.); +#27215 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#27216 = PCURVE('',#26658,#27217); +#27217 = DEFINITIONAL_REPRESENTATION('',(#27218),#27222); +#27218 = LINE('',#27219,#27220); +#27219 = CARTESIAN_POINT('',(0.,0.)); +#27220 = VECTOR('',#27221,1.); +#27221 = DIRECTION('',(1.,0.)); +#27222 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27223 = PCURVE('',#27224,#27229); +#27224 = PLANE('',#27225); +#27225 = AXIS2_PLACEMENT_3D('',#27226,#27227,#27228); +#27226 = CARTESIAN_POINT('',(-3.000096934556,3.808225032462E-16,0.15)); +#27227 = DIRECTION('',(0.,0.,1.)); +#27228 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#27229 = DEFINITIONAL_REPRESENTATION('',(#27230),#27234); +#27230 = LINE('',#27231,#27232); +#27231 = CARTESIAN_POINT('',(1.149903065444,-3.15)); +#27232 = VECTOR('',#27233,1.); +#27233 = DIRECTION('',(0.,1.)); +#27234 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27235 = ADVANCED_FACE('',(#27236),#26856,.F.); +#27236 = FACE_BOUND('',#27237,.F.); +#27237 = EDGE_LOOP('',(#27238,#27261,#27262,#27263)); +#27238 = ORIENTED_EDGE('',*,*,#27239,.T.); +#27239 = EDGE_CURVE('',#27240,#26814,#27242,.T.); +#27240 = VERTEX_POINT('',#27241); +#27241 = CARTESIAN_POINT('',(-0.646142399166,4.15,0.85)); +#27242 = SURFACE_CURVE('',#27243,(#27247,#27254),.PCURVE_S1.); +#27243 = LINE('',#27244,#27245); +#27244 = CARTESIAN_POINT('',(-0.646142399166,4.15,0.65)); +#27245 = VECTOR('',#27246,1.); +#27246 = DIRECTION('',(0.,0.,-1.)); +#27247 = PCURVE('',#26856,#27248); +#27248 = DEFINITIONAL_REPRESENTATION('',(#27249),#27253); +#27249 = LINE('',#27250,#27251); +#27250 = CARTESIAN_POINT('',(1.416339486622,0.)); +#27251 = VECTOR('',#27252,1.); +#27252 = DIRECTION('',(0.,1.)); +#27253 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27254 = PCURVE('',#26829,#27255); +#27255 = DEFINITIONAL_REPRESENTATION('',(#27256),#27260); +#27256 = LINE('',#27257,#27258); +#27257 = CARTESIAN_POINT('',(4.796142399166,-0.5)); +#27258 = VECTOR('',#27259,1.); +#27259 = DIRECTION('',(0.,1.)); +#27260 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27261 = ORIENTED_EDGE('',*,*,#26841,.T.); +#27262 = ORIENTED_EDGE('',*,*,#27086,.F.); +#27263 = ORIENTED_EDGE('',*,*,#27264,.T.); +#27264 = EDGE_CURVE('',#27059,#27240,#27265,.T.); +#27265 = SURFACE_CURVE('',#27266,(#27271,#27278),.PCURVE_S1.); +#27266 = CIRCLE('',#27267,4.2); +#27267 = AXIS2_PLACEMENT_3D('',#27268,#27269,#27270); +#27268 = CARTESIAN_POINT('',(0.,0.,0.85)); +#27269 = DIRECTION('',(0.,0.,-1.)); +#27270 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#27271 = PCURVE('',#26856,#27272); +#27272 = DEFINITIONAL_REPRESENTATION('',(#27273),#27277); +#27273 = LINE('',#27274,#27275); +#27274 = CARTESIAN_POINT('',(0.,-0.2)); +#27275 = VECTOR('',#27276,1.); +#27276 = DIRECTION('',(1.,0.)); +#27277 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27278 = PCURVE('',#27074,#27279); +#27279 = DEFINITIONAL_REPRESENTATION('',(#27280),#27288); +#27280 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#27281,#27282,#27283,#27284 + ,#27285,#27286,#27287),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#27281 = CARTESIAN_POINT('',(4.2,4.15)); +#27282 = CARTESIAN_POINT('',(4.2,-3.124613391789)); +#27283 = CARTESIAN_POINT('',(-2.1,0.512693304105)); +#27284 = CARTESIAN_POINT('',(-8.4,4.15)); +#27285 = CARTESIAN_POINT('',(-2.1,7.787306695895)); +#27286 = CARTESIAN_POINT('',(4.2,11.424613391789)); +#27287 = CARTESIAN_POINT('',(4.2,4.15)); +#27288 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27289 = ADVANCED_FACE('',(#27290),#26687,.F.); +#27290 = FACE_BOUND('',#27291,.F.); +#27291 = EDGE_LOOP('',(#27292,#27315,#27341,#27342)); +#27292 = ORIENTED_EDGE('',*,*,#27293,.F.); +#27293 = EDGE_CURVE('',#27294,#26671,#27296,.T.); +#27294 = VERTEX_POINT('',#27295); +#27295 = CARTESIAN_POINT('',(-0.646142399166,-4.15,0.85)); +#27296 = SURFACE_CURVE('',#27297,(#27301,#27308),.PCURVE_S1.); +#27297 = LINE('',#27298,#27299); +#27298 = CARTESIAN_POINT('',(-0.646142399166,-4.15,0.65)); +#27299 = VECTOR('',#27300,1.); +#27300 = DIRECTION('',(0.,0.,-1.)); +#27301 = PCURVE('',#26687,#27302); +#27302 = DEFINITIONAL_REPRESENTATION('',(#27303),#27307); +#27303 = LINE('',#27304,#27305); +#27304 = CARTESIAN_POINT('',(4.866845820558,0.)); +#27305 = VECTOR('',#27306,1.); +#27306 = DIRECTION('',(0.,1.)); +#27307 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27308 = PCURVE('',#26715,#27309); +#27309 = DEFINITIONAL_REPRESENTATION('',(#27310),#27314); +#27310 = LINE('',#27311,#27312); +#27311 = CARTESIAN_POINT('',(2.503857600834,-0.5)); +#27312 = VECTOR('',#27313,1.); +#27313 = DIRECTION('',(0.,1.)); +#27314 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27315 = ORIENTED_EDGE('',*,*,#27316,.T.); +#27316 = EDGE_CURVE('',#27294,#27109,#27317,.T.); +#27317 = SURFACE_CURVE('',#27318,(#27323,#27330),.PCURVE_S1.); +#27318 = CIRCLE('',#27319,4.2); +#27319 = AXIS2_PLACEMENT_3D('',#27320,#27321,#27322); +#27320 = CARTESIAN_POINT('',(0.,0.,0.85)); +#27321 = DIRECTION('',(0.,0.,-1.)); +#27322 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#27323 = PCURVE('',#26687,#27324); +#27324 = DEFINITIONAL_REPRESENTATION('',(#27325),#27329); +#27325 = LINE('',#27326,#27327); +#27326 = CARTESIAN_POINT('',(0.,-0.2)); +#27327 = VECTOR('',#27328,1.); +#27328 = DIRECTION('',(1.,0.)); +#27329 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27330 = PCURVE('',#27147,#27331); +#27331 = DEFINITIONAL_REPRESENTATION('',(#27332),#27340); +#27332 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#27333,#27334,#27335,#27336 + ,#27337,#27338,#27339),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#27333 = CARTESIAN_POINT('',(4.2,4.15)); +#27334 = CARTESIAN_POINT('',(4.2,-3.124613391789)); +#27335 = CARTESIAN_POINT('',(-2.1,0.512693304105)); +#27336 = CARTESIAN_POINT('',(-8.4,4.15)); +#27337 = CARTESIAN_POINT('',(-2.1,7.787306695895)); +#27338 = CARTESIAN_POINT('',(4.2,11.424613391789)); +#27339 = CARTESIAN_POINT('',(4.2,4.15)); +#27340 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27341 = ORIENTED_EDGE('',*,*,#27108,.T.); +#27342 = ORIENTED_EDGE('',*,*,#26670,.T.); +#27343 = ADVANCED_FACE('',(#27344),#26829,.F.); +#27344 = FACE_BOUND('',#27345,.F.); +#27345 = EDGE_LOOP('',(#27346,#27371,#27399,#27427,#27448,#27449,#27450, + #27473)); +#27346 = ORIENTED_EDGE('',*,*,#27347,.F.); +#27347 = EDGE_CURVE('',#27348,#27350,#27352,.T.); +#27348 = VERTEX_POINT('',#27349); +#27349 = CARTESIAN_POINT('',(3.75,4.15,0.15)); +#27350 = VERTEX_POINT('',#27351); +#27351 = CARTESIAN_POINT('',(-3.15,4.15,0.15)); +#27352 = SURFACE_CURVE('',#27353,(#27357,#27364),.PCURVE_S1.); +#27353 = LINE('',#27354,#27355); +#27354 = CARTESIAN_POINT('',(4.15,4.15,0.15)); +#27355 = VECTOR('',#27356,1.); +#27356 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#27357 = PCURVE('',#26829,#27358); +#27358 = DEFINITIONAL_REPRESENTATION('',(#27359),#27363); +#27359 = LINE('',#27360,#27361); +#27360 = CARTESIAN_POINT('',(0.,0.)); +#27361 = VECTOR('',#27362,1.); +#27362 = DIRECTION('',(1.,0.)); +#27363 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27364 = PCURVE('',#27018,#27365); +#27365 = DEFINITIONAL_REPRESENTATION('',(#27366),#27370); +#27366 = LINE('',#27367,#27368); +#27367 = CARTESIAN_POINT('',(-3.985263811922,-4.15)); +#27368 = VECTOR('',#27369,1.); +#27369 = DIRECTION('',(1.,-1.308421422143E-95)); +#27370 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27371 = ORIENTED_EDGE('',*,*,#27372,.T.); +#27372 = EDGE_CURVE('',#27348,#27373,#27375,.T.); +#27373 = VERTEX_POINT('',#27374); +#27374 = CARTESIAN_POINT('',(3.75,4.15,1.15)); +#27375 = SURFACE_CURVE('',#27376,(#27380,#27387),.PCURVE_S1.); +#27376 = LINE('',#27377,#27378); +#27377 = CARTESIAN_POINT('',(3.75,4.15,0.15)); +#27378 = VECTOR('',#27379,1.); +#27379 = DIRECTION('',(0.,0.,1.)); +#27380 = PCURVE('',#26829,#27381); +#27381 = DEFINITIONAL_REPRESENTATION('',(#27382),#27386); +#27382 = LINE('',#27383,#27384); +#27383 = CARTESIAN_POINT('',(0.4,0.)); +#27384 = VECTOR('',#27385,1.); +#27385 = DIRECTION('',(0.,-1.)); +#27386 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27387 = PCURVE('',#27388,#27393); +#27388 = CYLINDRICAL_SURFACE('',#27389,0.4); +#27389 = AXIS2_PLACEMENT_3D('',#27390,#27391,#27392); +#27390 = CARTESIAN_POINT('',(3.75,3.75,0.15)); +#27391 = DIRECTION('',(0.,0.,1.)); +#27392 = DIRECTION('',(1.224646799147E-16,1.,-0.)); +#27393 = DEFINITIONAL_REPRESENTATION('',(#27394),#27398); +#27394 = LINE('',#27395,#27396); +#27395 = CARTESIAN_POINT('',(6.28318530718,0.)); +#27396 = VECTOR('',#27397,1.); +#27397 = DIRECTION('',(0.,1.)); +#27398 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27399 = ORIENTED_EDGE('',*,*,#27400,.T.); +#27400 = EDGE_CURVE('',#27373,#27401,#27403,.T.); +#27401 = VERTEX_POINT('',#27402); +#27402 = CARTESIAN_POINT('',(0.646142399166,4.15,1.15)); +#27403 = SURFACE_CURVE('',#27404,(#27408,#27415),.PCURVE_S1.); +#27404 = LINE('',#27405,#27406); +#27405 = CARTESIAN_POINT('',(4.15,4.15,1.15)); +#27406 = VECTOR('',#27407,1.); +#27407 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#27408 = PCURVE('',#26829,#27409); +#27409 = DEFINITIONAL_REPRESENTATION('',(#27410),#27414); +#27410 = LINE('',#27411,#27412); +#27411 = CARTESIAN_POINT('',(0.,-1.)); +#27412 = VECTOR('',#27413,1.); +#27413 = DIRECTION('',(1.,0.)); +#27414 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27415 = PCURVE('',#27416,#27421); +#27416 = PLANE('',#27417); +#27417 = AXIS2_PLACEMENT_3D('',#27418,#27419,#27420); +#27418 = CARTESIAN_POINT('',(0.164736188078,9.074939905459E-17,1.15)); +#27419 = DIRECTION('',(-6.300542223781E-34,7.715938867246E-50,1.)); +#27420 = DIRECTION('',(-1.,1.224646799147E-16,-6.300542223781E-34)); +#27421 = DEFINITIONAL_REPRESENTATION('',(#27422),#27426); +#27422 = LINE('',#27423,#27424); +#27423 = CARTESIAN_POINT('',(-3.985263811922,-4.15)); +#27424 = VECTOR('',#27425,1.); +#27425 = DIRECTION('',(1.,-1.308421422143E-95)); +#27426 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27427 = ORIENTED_EDGE('',*,*,#27428,.T.); +#27428 = EDGE_CURVE('',#27401,#26785,#27429,.T.); +#27429 = SURFACE_CURVE('',#27430,(#27434,#27441),.PCURVE_S1.); +#27430 = LINE('',#27431,#27432); +#27431 = CARTESIAN_POINT('',(0.646142399166,4.15,0.65)); +#27432 = VECTOR('',#27433,1.); +#27433 = DIRECTION('',(0.,0.,-1.)); +#27434 = PCURVE('',#26829,#27435); +#27435 = DEFINITIONAL_REPRESENTATION('',(#27436),#27440); +#27436 = LINE('',#27437,#27438); +#27437 = CARTESIAN_POINT('',(3.503857600834,-0.5)); +#27438 = VECTOR('',#27439,1.); +#27439 = DIRECTION('',(0.,1.)); +#27440 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27441 = PCURVE('',#26801,#27442); +#27442 = DEFINITIONAL_REPRESENTATION('',(#27443),#27447); +#27443 = LINE('',#27444,#27445); +#27444 = CARTESIAN_POINT('',(1.725253166968,0.)); +#27445 = VECTOR('',#27446,1.); +#27446 = DIRECTION('',(0.,1.)); +#27447 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27448 = ORIENTED_EDGE('',*,*,#26813,.T.); +#27449 = ORIENTED_EDGE('',*,*,#27239,.F.); +#27450 = ORIENTED_EDGE('',*,*,#27451,.T.); +#27451 = EDGE_CURVE('',#27240,#27452,#27454,.T.); +#27452 = VERTEX_POINT('',#27453); +#27453 = CARTESIAN_POINT('',(-3.15,4.15,0.85)); +#27454 = SURFACE_CURVE('',#27455,(#27459,#27466),.PCURVE_S1.); +#27455 = LINE('',#27456,#27457); +#27456 = CARTESIAN_POINT('',(5.082284216462E-16,4.15,0.85)); +#27457 = VECTOR('',#27458,1.); +#27458 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#27459 = PCURVE('',#26829,#27460); +#27460 = DEFINITIONAL_REPRESENTATION('',(#27461),#27465); +#27461 = LINE('',#27462,#27463); +#27462 = CARTESIAN_POINT('',(4.15,-0.7)); +#27463 = VECTOR('',#27464,1.); +#27464 = DIRECTION('',(1.,0.)); +#27465 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27466 = PCURVE('',#27074,#27467); +#27467 = DEFINITIONAL_REPRESENTATION('',(#27468),#27472); +#27468 = LINE('',#27469,#27470); +#27469 = CARTESIAN_POINT('',(0.,0.)); +#27470 = VECTOR('',#27471,1.); +#27471 = DIRECTION('',(1.,0.)); +#27472 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27473 = ORIENTED_EDGE('',*,*,#27474,.F.); +#27474 = EDGE_CURVE('',#27350,#27452,#27475,.T.); +#27475 = SURFACE_CURVE('',#27476,(#27480,#27487),.PCURVE_S1.); +#27476 = LINE('',#27477,#27478); +#27477 = CARTESIAN_POINT('',(-3.15,4.15,0.15)); +#27478 = VECTOR('',#27479,1.); +#27479 = DIRECTION('',(0.,0.,1.)); +#27480 = PCURVE('',#26829,#27481); +#27481 = DEFINITIONAL_REPRESENTATION('',(#27482),#27486); +#27482 = LINE('',#27483,#27484); +#27483 = CARTESIAN_POINT('',(7.3,0.)); +#27484 = VECTOR('',#27485,1.); +#27485 = DIRECTION('',(0.,-1.)); +#27486 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27487 = PCURVE('',#27046,#27488); +#27488 = DEFINITIONAL_REPRESENTATION('',(#27489),#27493); +#27489 = LINE('',#27490,#27491); +#27490 = CARTESIAN_POINT('',(0.,0.)); +#27491 = VECTOR('',#27492,1.); +#27492 = DIRECTION('',(0.,-1.)); +#27493 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27494 = ADVANCED_FACE('',(#27495),#26715,.F.); +#27495 = FACE_BOUND('',#27496,.F.); +#27496 = EDGE_LOOP('',(#27497,#27527,#27550,#27573,#27594,#27595,#27596, + #27619)); +#27497 = ORIENTED_EDGE('',*,*,#27498,.F.); +#27498 = EDGE_CURVE('',#27499,#27501,#27503,.T.); +#27499 = VERTEX_POINT('',#27500); +#27500 = CARTESIAN_POINT('',(3.75,-4.15,0.15)); +#27501 = VERTEX_POINT('',#27502); +#27502 = CARTESIAN_POINT('',(3.75,-4.15,1.15)); +#27503 = SURFACE_CURVE('',#27504,(#27508,#27515),.PCURVE_S1.); +#27504 = LINE('',#27505,#27506); +#27505 = CARTESIAN_POINT('',(3.75,-4.15,0.15)); +#27506 = VECTOR('',#27507,1.); +#27507 = DIRECTION('',(0.,0.,1.)); +#27508 = PCURVE('',#26715,#27509); +#27509 = DEFINITIONAL_REPRESENTATION('',(#27510),#27514); +#27510 = LINE('',#27511,#27512); +#27511 = CARTESIAN_POINT('',(6.9,0.)); +#27512 = VECTOR('',#27513,1.); +#27513 = DIRECTION('',(0.,-1.)); +#27514 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27515 = PCURVE('',#27516,#27521); +#27516 = CYLINDRICAL_SURFACE('',#27517,0.4); +#27517 = AXIS2_PLACEMENT_3D('',#27518,#27519,#27520); +#27518 = CARTESIAN_POINT('',(3.75,-3.75,0.15)); +#27519 = DIRECTION('',(0.,0.,1.)); +#27520 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#27521 = DEFINITIONAL_REPRESENTATION('',(#27522),#27526); +#27522 = LINE('',#27523,#27524); +#27523 = CARTESIAN_POINT('',(4.712388980385,0.)); +#27524 = VECTOR('',#27525,1.); +#27525 = DIRECTION('',(0.,1.)); +#27526 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27527 = ORIENTED_EDGE('',*,*,#27528,.F.); +#27528 = EDGE_CURVE('',#27529,#27499,#27531,.T.); +#27529 = VERTEX_POINT('',#27530); +#27530 = CARTESIAN_POINT('',(-3.15,-4.15,0.15)); +#27531 = SURFACE_CURVE('',#27532,(#27536,#27543),.PCURVE_S1.); +#27532 = LINE('',#27533,#27534); +#27533 = CARTESIAN_POINT('',(-3.15,-4.15,0.15)); +#27534 = VECTOR('',#27535,1.); +#27535 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#27536 = PCURVE('',#26715,#27537); +#27537 = DEFINITIONAL_REPRESENTATION('',(#27538),#27542); +#27538 = LINE('',#27539,#27540); +#27539 = CARTESIAN_POINT('',(0.,0.)); +#27540 = VECTOR('',#27541,1.); +#27541 = DIRECTION('',(1.,0.)); +#27542 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27543 = PCURVE('',#27018,#27544); +#27544 = DEFINITIONAL_REPRESENTATION('',(#27545),#27549); +#27545 = LINE('',#27546,#27547); +#27546 = CARTESIAN_POINT('',(3.314736188078,4.15)); +#27547 = VECTOR('',#27548,1.); +#27548 = DIRECTION('',(-1.,1.308421422143E-95)); +#27549 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27550 = ORIENTED_EDGE('',*,*,#27551,.T.); +#27551 = EDGE_CURVE('',#27529,#27552,#27554,.T.); +#27552 = VERTEX_POINT('',#27553); +#27553 = CARTESIAN_POINT('',(-3.15,-4.15,0.85)); +#27554 = SURFACE_CURVE('',#27555,(#27559,#27566),.PCURVE_S1.); +#27555 = LINE('',#27556,#27557); +#27556 = CARTESIAN_POINT('',(-3.15,-4.15,0.15)); +#27557 = VECTOR('',#27558,1.); +#27558 = DIRECTION('',(0.,0.,1.)); +#27559 = PCURVE('',#26715,#27560); +#27560 = DEFINITIONAL_REPRESENTATION('',(#27561),#27565); +#27561 = LINE('',#27562,#27563); +#27562 = CARTESIAN_POINT('',(0.,0.)); +#27563 = VECTOR('',#27564,1.); +#27564 = DIRECTION('',(0.,-1.)); +#27565 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27566 = PCURVE('',#27175,#27567); +#27567 = DEFINITIONAL_REPRESENTATION('',(#27568),#27572); +#27568 = LINE('',#27569,#27570); +#27569 = CARTESIAN_POINT('',(1.414213562373,0.)); +#27570 = VECTOR('',#27571,1.); +#27571 = DIRECTION('',(0.,-1.)); +#27572 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27573 = ORIENTED_EDGE('',*,*,#27574,.F.); +#27574 = EDGE_CURVE('',#27294,#27552,#27575,.T.); +#27575 = SURFACE_CURVE('',#27576,(#27580,#27587),.PCURVE_S1.); +#27576 = LINE('',#27577,#27578); +#27577 = CARTESIAN_POINT('',(-5.082284216462E-16,-4.15,0.85)); +#27578 = VECTOR('',#27579,1.); +#27579 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#27580 = PCURVE('',#26715,#27581); +#27581 = DEFINITIONAL_REPRESENTATION('',(#27582),#27586); +#27582 = LINE('',#27583,#27584); +#27583 = CARTESIAN_POINT('',(3.15,-0.7)); +#27584 = VECTOR('',#27585,1.); +#27585 = DIRECTION('',(-1.,0.)); +#27586 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27587 = PCURVE('',#27147,#27588); +#27588 = DEFINITIONAL_REPRESENTATION('',(#27589),#27593); +#27589 = LINE('',#27590,#27591); +#27590 = CARTESIAN_POINT('',(3.900917176318E-28,8.3)); +#27591 = VECTOR('',#27592,1.); +#27592 = DIRECTION('',(1.,0.)); +#27593 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27594 = ORIENTED_EDGE('',*,*,#27293,.T.); +#27595 = ORIENTED_EDGE('',*,*,#26699,.T.); +#27596 = ORIENTED_EDGE('',*,*,#27597,.F.); +#27597 = EDGE_CURVE('',#27598,#26700,#27600,.T.); +#27598 = VERTEX_POINT('',#27599); +#27599 = CARTESIAN_POINT('',(0.646142399166,-4.15,1.15)); +#27600 = SURFACE_CURVE('',#27601,(#27605,#27612),.PCURVE_S1.); +#27601 = LINE('',#27602,#27603); +#27602 = CARTESIAN_POINT('',(0.646142399166,-4.15,0.65)); +#27603 = VECTOR('',#27604,1.); +#27604 = DIRECTION('',(0.,0.,-1.)); +#27605 = PCURVE('',#26715,#27606); +#27606 = DEFINITIONAL_REPRESENTATION('',(#27607),#27611); +#27607 = LINE('',#27608,#27609); +#27608 = CARTESIAN_POINT('',(3.796142399166,-0.5)); +#27609 = VECTOR('',#27610,1.); +#27610 = DIRECTION('',(0.,1.)); +#27611 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27612 = PCURVE('',#26744,#27613); +#27613 = DEFINITIONAL_REPRESENTATION('',(#27614),#27618); +#27614 = LINE('',#27615,#27616); +#27615 = CARTESIAN_POINT('',(4.557932140211,0.)); +#27616 = VECTOR('',#27617,1.); +#27617 = DIRECTION('',(0.,1.)); +#27618 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27619 = ORIENTED_EDGE('',*,*,#27620,.T.); +#27620 = EDGE_CURVE('',#27598,#27501,#27621,.T.); +#27621 = SURFACE_CURVE('',#27622,(#27626,#27633),.PCURVE_S1.); +#27622 = LINE('',#27623,#27624); +#27623 = CARTESIAN_POINT('',(-3.15,-4.15,1.15)); +#27624 = VECTOR('',#27625,1.); +#27625 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#27626 = PCURVE('',#26715,#27627); +#27627 = DEFINITIONAL_REPRESENTATION('',(#27628),#27632); +#27628 = LINE('',#27629,#27630); +#27629 = CARTESIAN_POINT('',(0.,-1.)); +#27630 = VECTOR('',#27631,1.); +#27631 = DIRECTION('',(1.,0.)); +#27632 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27633 = PCURVE('',#27634,#27639); +#27634 = PLANE('',#27635); +#27635 = AXIS2_PLACEMENT_3D('',#27636,#27637,#27638); +#27636 = CARTESIAN_POINT('',(0.164736188078,9.074939905459E-17,1.15)); +#27637 = DIRECTION('',(-6.300542223781E-34,7.715938867246E-50,1.)); +#27638 = DIRECTION('',(-1.,1.224646799147E-16,-6.300542223781E-34)); +#27639 = DEFINITIONAL_REPRESENTATION('',(#27640),#27644); +#27640 = LINE('',#27641,#27642); +#27641 = CARTESIAN_POINT('',(3.314736188078,4.15)); +#27642 = VECTOR('',#27643,1.); +#27643 = DIRECTION('',(-1.,1.308421422143E-95)); +#27644 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27645 = ADVANCED_FACE('',(#27646),#26801,.F.); +#27646 = FACE_BOUND('',#27647,.F.); +#27647 = EDGE_LOOP('',(#27648,#27672,#27693,#27694)); +#27648 = ORIENTED_EDGE('',*,*,#27649,.F.); +#27649 = EDGE_CURVE('',#27650,#27401,#27652,.T.); +#27650 = VERTEX_POINT('',#27651); +#27651 = CARTESIAN_POINT('',(4.15,0.646142399166,1.15)); +#27652 = SURFACE_CURVE('',#27653,(#27658,#27665),.PCURVE_S1.); +#27653 = CIRCLE('',#27654,4.2); +#27654 = AXIS2_PLACEMENT_3D('',#27655,#27656,#27657); +#27655 = CARTESIAN_POINT('',(0.,0.,1.15)); +#27656 = DIRECTION('',(0.,0.,1.)); +#27657 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#27658 = PCURVE('',#26801,#27659); +#27659 = DEFINITIONAL_REPRESENTATION('',(#27660),#27664); +#27660 = LINE('',#27661,#27662); +#27661 = CARTESIAN_POINT('',(6.28318530718,-0.5)); +#27662 = VECTOR('',#27663,1.); +#27663 = DIRECTION('',(-1.,0.)); +#27664 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27665 = PCURVE('',#27416,#27666); +#27666 = DEFINITIONAL_REPRESENTATION('',(#27667),#27671); +#27667 = CIRCLE('',#27668,4.2); +#27668 = AXIS2_PLACEMENT_2D('',#27669,#27670); +#27669 = CARTESIAN_POINT('',(0.164736188078,1.109237635979E-16)); +#27670 = DIRECTION('',(1.,-1.308421422143E-95)); +#27671 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27672 = ORIENTED_EDGE('',*,*,#27673,.T.); +#27673 = EDGE_CURVE('',#27650,#26757,#27674,.T.); +#27674 = SURFACE_CURVE('',#27675,(#27679,#27686),.PCURVE_S1.); +#27675 = LINE('',#27676,#27677); +#27676 = CARTESIAN_POINT('',(4.15,0.646142399166,0.65)); +#27677 = VECTOR('',#27678,1.); +#27678 = DIRECTION('',(0.,0.,-1.)); +#27679 = PCURVE('',#26801,#27680); +#27680 = DEFINITIONAL_REPRESENTATION('',(#27681),#27685); +#27681 = LINE('',#27682,#27683); +#27682 = CARTESIAN_POINT('',(2.987135813417,0.)); +#27683 = VECTOR('',#27684,1.); +#27684 = DIRECTION('',(0.,1.)); +#27685 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27686 = PCURVE('',#26772,#27687); +#27687 = DEFINITIONAL_REPRESENTATION('',(#27688),#27692); +#27688 = LINE('',#27689,#27690); +#27689 = CARTESIAN_POINT('',(4.796142399166,-0.5)); +#27690 = VECTOR('',#27691,1.); +#27691 = DIRECTION('',(0.,1.)); +#27692 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27693 = ORIENTED_EDGE('',*,*,#26784,.T.); +#27694 = ORIENTED_EDGE('',*,*,#27428,.F.); +#27695 = ADVANCED_FACE('',(#27696),#26744,.F.); +#27696 = FACE_BOUND('',#27697,.F.); +#27697 = EDGE_LOOP('',(#27698,#27721,#27743,#27744)); +#27698 = ORIENTED_EDGE('',*,*,#27699,.F.); +#27699 = EDGE_CURVE('',#27700,#26728,#27702,.T.); +#27700 = VERTEX_POINT('',#27701); +#27701 = CARTESIAN_POINT('',(4.15,-0.646142399166,1.15)); +#27702 = SURFACE_CURVE('',#27703,(#27707,#27714),.PCURVE_S1.); +#27703 = LINE('',#27704,#27705); +#27704 = CARTESIAN_POINT('',(4.15,-0.646142399166,0.65)); +#27705 = VECTOR('',#27706,1.); +#27706 = DIRECTION('',(0.,0.,-1.)); +#27707 = PCURVE('',#26744,#27708); +#27708 = DEFINITIONAL_REPRESENTATION('',(#27709),#27713); +#27709 = LINE('',#27710,#27711); +#27710 = CARTESIAN_POINT('',(3.296049493763,0.)); +#27711 = VECTOR('',#27712,1.); +#27712 = DIRECTION('',(0.,1.)); +#27713 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27714 = PCURVE('',#26772,#27715); +#27715 = DEFINITIONAL_REPRESENTATION('',(#27716),#27720); +#27716 = LINE('',#27717,#27718); +#27717 = CARTESIAN_POINT('',(3.503857600834,-0.5)); +#27718 = VECTOR('',#27719,1.); +#27719 = DIRECTION('',(0.,1.)); +#27720 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27721 = ORIENTED_EDGE('',*,*,#27722,.F.); +#27722 = EDGE_CURVE('',#27598,#27700,#27723,.T.); +#27723 = SURFACE_CURVE('',#27724,(#27729,#27736),.PCURVE_S1.); +#27724 = CIRCLE('',#27725,4.2); +#27725 = AXIS2_PLACEMENT_3D('',#27726,#27727,#27728); +#27726 = CARTESIAN_POINT('',(0.,0.,1.15)); +#27727 = DIRECTION('',(0.,0.,1.)); +#27728 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#27729 = PCURVE('',#26744,#27730); +#27730 = DEFINITIONAL_REPRESENTATION('',(#27731),#27735); +#27731 = LINE('',#27732,#27733); +#27732 = CARTESIAN_POINT('',(6.28318530718,-0.5)); +#27733 = VECTOR('',#27734,1.); +#27734 = DIRECTION('',(-1.,0.)); +#27735 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27736 = PCURVE('',#27634,#27737); +#27737 = DEFINITIONAL_REPRESENTATION('',(#27738),#27742); +#27738 = CIRCLE('',#27739,4.2); +#27739 = AXIS2_PLACEMENT_2D('',#27740,#27741); +#27740 = CARTESIAN_POINT('',(0.164736188078,1.109237635979E-16)); +#27741 = DIRECTION('',(1.,-1.308421422143E-95)); +#27742 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27743 = ORIENTED_EDGE('',*,*,#27597,.T.); +#27744 = ORIENTED_EDGE('',*,*,#26727,.T.); +#27745 = ADVANCED_FACE('',(#27746),#26772,.F.); +#27746 = FACE_BOUND('',#27747,.F.); +#27747 = EDGE_LOOP('',(#27748,#27773,#27796,#27817,#27818,#27819,#27820, + #27843,#27866,#27889)); +#27748 = ORIENTED_EDGE('',*,*,#27749,.F.); +#27749 = EDGE_CURVE('',#27750,#27752,#27754,.T.); +#27750 = VERTEX_POINT('',#27751); +#27751 = CARTESIAN_POINT('',(4.15,-3.75,0.15)); +#27752 = VERTEX_POINT('',#27753); +#27753 = CARTESIAN_POINT('',(4.15,-0.325,0.15)); +#27754 = SURFACE_CURVE('',#27755,(#27759,#27766),.PCURVE_S1.); +#27755 = LINE('',#27756,#27757); +#27756 = CARTESIAN_POINT('',(4.15,-4.15,0.15)); +#27757 = VECTOR('',#27758,1.); +#27758 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#27759 = PCURVE('',#26772,#27760); +#27760 = DEFINITIONAL_REPRESENTATION('',(#27761),#27765); +#27761 = LINE('',#27762,#27763); +#27762 = CARTESIAN_POINT('',(0.,0.)); +#27763 = VECTOR('',#27764,1.); +#27764 = DIRECTION('',(1.,0.)); +#27765 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27766 = PCURVE('',#27018,#27767); +#27767 = DEFINITIONAL_REPRESENTATION('',(#27768),#27772); +#27768 = LINE('',#27769,#27770); +#27769 = CARTESIAN_POINT('',(-3.985263811922,4.15)); +#27770 = VECTOR('',#27771,1.); +#27771 = DIRECTION('',(1.308421422143E-95,-1.)); +#27772 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27773 = ORIENTED_EDGE('',*,*,#27774,.T.); +#27774 = EDGE_CURVE('',#27750,#27775,#27777,.T.); +#27775 = VERTEX_POINT('',#27776); +#27776 = CARTESIAN_POINT('',(4.15,-3.75,1.15)); +#27777 = SURFACE_CURVE('',#27778,(#27782,#27789),.PCURVE_S1.); +#27778 = LINE('',#27779,#27780); +#27779 = CARTESIAN_POINT('',(4.15,-3.75,0.15)); +#27780 = VECTOR('',#27781,1.); +#27781 = DIRECTION('',(0.,0.,1.)); +#27782 = PCURVE('',#26772,#27783); +#27783 = DEFINITIONAL_REPRESENTATION('',(#27784),#27788); +#27784 = LINE('',#27785,#27786); +#27785 = CARTESIAN_POINT('',(0.4,0.)); +#27786 = VECTOR('',#27787,1.); +#27787 = DIRECTION('',(0.,-1.)); +#27788 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27789 = PCURVE('',#27516,#27790); +#27790 = DEFINITIONAL_REPRESENTATION('',(#27791),#27795); +#27791 = LINE('',#27792,#27793); +#27792 = CARTESIAN_POINT('',(6.28318530718,0.)); +#27793 = VECTOR('',#27794,1.); +#27794 = DIRECTION('',(0.,1.)); +#27795 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27796 = ORIENTED_EDGE('',*,*,#27797,.T.); +#27797 = EDGE_CURVE('',#27775,#27700,#27798,.T.); +#27798 = SURFACE_CURVE('',#27799,(#27803,#27810),.PCURVE_S1.); +#27799 = LINE('',#27800,#27801); +#27800 = CARTESIAN_POINT('',(4.15,-4.15,1.15)); +#27801 = VECTOR('',#27802,1.); +#27802 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#27803 = PCURVE('',#26772,#27804); +#27804 = DEFINITIONAL_REPRESENTATION('',(#27805),#27809); +#27805 = LINE('',#27806,#27807); +#27806 = CARTESIAN_POINT('',(0.,-1.)); +#27807 = VECTOR('',#27808,1.); +#27808 = DIRECTION('',(1.,0.)); +#27809 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27810 = PCURVE('',#27634,#27811); +#27811 = DEFINITIONAL_REPRESENTATION('',(#27812),#27816); +#27812 = LINE('',#27813,#27814); +#27813 = CARTESIAN_POINT('',(-3.985263811922,4.15)); +#27814 = VECTOR('',#27815,1.); +#27815 = DIRECTION('',(1.308421422143E-95,-1.)); +#27816 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27817 = ORIENTED_EDGE('',*,*,#27699,.T.); +#27818 = ORIENTED_EDGE('',*,*,#26756,.T.); +#27819 = ORIENTED_EDGE('',*,*,#27673,.F.); +#27820 = ORIENTED_EDGE('',*,*,#27821,.T.); +#27821 = EDGE_CURVE('',#27650,#27822,#27824,.T.); +#27822 = VERTEX_POINT('',#27823); +#27823 = CARTESIAN_POINT('',(4.15,3.75,1.15)); +#27824 = SURFACE_CURVE('',#27825,(#27829,#27836),.PCURVE_S1.); +#27825 = LINE('',#27826,#27827); +#27826 = CARTESIAN_POINT('',(4.15,-4.15,1.15)); +#27827 = VECTOR('',#27828,1.); +#27828 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#27829 = PCURVE('',#26772,#27830); +#27830 = DEFINITIONAL_REPRESENTATION('',(#27831),#27835); +#27831 = LINE('',#27832,#27833); +#27832 = CARTESIAN_POINT('',(0.,-1.)); +#27833 = VECTOR('',#27834,1.); +#27834 = DIRECTION('',(1.,0.)); +#27835 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27836 = PCURVE('',#27416,#27837); +#27837 = DEFINITIONAL_REPRESENTATION('',(#27838),#27842); +#27838 = LINE('',#27839,#27840); +#27839 = CARTESIAN_POINT('',(-3.985263811922,4.15)); +#27840 = VECTOR('',#27841,1.); +#27841 = DIRECTION('',(1.308421422143E-95,-1.)); +#27842 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27843 = ORIENTED_EDGE('',*,*,#27844,.F.); +#27844 = EDGE_CURVE('',#27845,#27822,#27847,.T.); +#27845 = VERTEX_POINT('',#27846); +#27846 = CARTESIAN_POINT('',(4.15,3.75,0.15)); +#27847 = SURFACE_CURVE('',#27848,(#27852,#27859),.PCURVE_S1.); +#27848 = LINE('',#27849,#27850); +#27849 = CARTESIAN_POINT('',(4.15,3.75,0.15)); +#27850 = VECTOR('',#27851,1.); +#27851 = DIRECTION('',(0.,0.,1.)); +#27852 = PCURVE('',#26772,#27853); +#27853 = DEFINITIONAL_REPRESENTATION('',(#27854),#27858); +#27854 = LINE('',#27855,#27856); +#27855 = CARTESIAN_POINT('',(7.9,0.)); +#27856 = VECTOR('',#27857,1.); +#27857 = DIRECTION('',(0.,-1.)); +#27858 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27859 = PCURVE('',#27388,#27860); +#27860 = DEFINITIONAL_REPRESENTATION('',(#27861),#27865); +#27861 = LINE('',#27862,#27863); +#27862 = CARTESIAN_POINT('',(4.712388980385,0.)); +#27863 = VECTOR('',#27864,1.); +#27864 = DIRECTION('',(0.,1.)); +#27865 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27866 = ORIENTED_EDGE('',*,*,#27867,.F.); +#27867 = EDGE_CURVE('',#27868,#27845,#27870,.T.); +#27868 = VERTEX_POINT('',#27869); +#27869 = CARTESIAN_POINT('',(4.15,0.325,0.15)); +#27870 = SURFACE_CURVE('',#27871,(#27875,#27882),.PCURVE_S1.); +#27871 = LINE('',#27872,#27873); +#27872 = CARTESIAN_POINT('',(4.15,-4.15,0.15)); +#27873 = VECTOR('',#27874,1.); +#27874 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#27875 = PCURVE('',#26772,#27876); +#27876 = DEFINITIONAL_REPRESENTATION('',(#27877),#27881); +#27877 = LINE('',#27878,#27879); +#27878 = CARTESIAN_POINT('',(0.,0.)); +#27879 = VECTOR('',#27880,1.); +#27880 = DIRECTION('',(1.,0.)); +#27881 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27882 = PCURVE('',#27018,#27883); +#27883 = DEFINITIONAL_REPRESENTATION('',(#27884),#27888); +#27884 = LINE('',#27885,#27886); +#27885 = CARTESIAN_POINT('',(-3.985263811922,4.15)); +#27886 = VECTOR('',#27887,1.); +#27887 = DIRECTION('',(1.308421422143E-95,-1.)); +#27888 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27889 = ORIENTED_EDGE('',*,*,#27890,.F.); +#27890 = EDGE_CURVE('',#27752,#27868,#27891,.T.); +#27891 = SURFACE_CURVE('',#27892,(#27896,#27903),.PCURVE_S1.); +#27892 = LINE('',#27893,#27894); +#27893 = CARTESIAN_POINT('',(4.15,-4.15,0.15)); +#27894 = VECTOR('',#27895,1.); +#27895 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#27896 = PCURVE('',#26772,#27897); +#27897 = DEFINITIONAL_REPRESENTATION('',(#27898),#27902); +#27898 = LINE('',#27899,#27900); +#27899 = CARTESIAN_POINT('',(0.,0.)); +#27900 = VECTOR('',#27901,1.); +#27901 = DIRECTION('',(1.,0.)); +#27902 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27903 = PCURVE('',#27904,#27909); +#27904 = PLANE('',#27905); +#27905 = AXIS2_PLACEMENT_3D('',#27906,#27907,#27908); +#27906 = CARTESIAN_POINT('',(3.000096934556,-7.482284140497E-16,0.15)); +#27907 = DIRECTION('',(0.,0.,1.)); +#27908 = DIRECTION('',(1.,-2.449293598295E-16,0.)); +#27909 = DEFINITIONAL_REPRESENTATION('',(#27910),#27914); +#27910 = LINE('',#27911,#27912); +#27911 = CARTESIAN_POINT('',(1.149903065444,-4.15)); +#27912 = VECTOR('',#27913,1.); +#27913 = DIRECTION('',(-1.224646799148E-16,1.)); +#27914 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27915 = ADVANCED_FACE('',(#27916),#26947,.T.); +#27916 = FACE_BOUND('',#27917,.T.); +#27917 = EDGE_LOOP('',(#27918,#27941,#28000,#28001)); +#27918 = ORIENTED_EDGE('',*,*,#27919,.T.); +#27919 = EDGE_CURVE('',#26875,#27920,#27922,.T.); +#27920 = VERTEX_POINT('',#27921); +#27921 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,3.238178046004)); +#27922 = SEAM_CURVE('',#27923,(#27927,#27934),.PCURVE_S1.); +#27923 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#27924,#27925,#27926), +.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((3,3),(0., +25.132741228718),.PIECEWISE_BEZIER_KNOTS.) CURVE() +GEOMETRIC_REPRESENTATION_ITEM() RATIONAL_B_SPLINE_CURVE((1., +0.738548945876,1.)) REPRESENTATION_ITEM('') ); +#27924 = CARTESIAN_POINT('',(-3.963636363636,4.854054585711E-16, + 3.198343678186)); +#27925 = CARTESIAN_POINT('',(-4.,1.639980384232E-15,3.201663208837)); +#27926 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,3.238178046004)); +#27927 = PCURVE('',#26947,#27928); +#27928 = DEFINITIONAL_REPRESENTATION('',(#27929),#27933); +#27929 = LINE('',#27930,#27931); +#27930 = CARTESIAN_POINT('',(7.016123852284E-13,0.)); +#27931 = VECTOR('',#27932,1.); +#27932 = DIRECTION('',(1.,0.)); +#27933 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27934 = PCURVE('',#26947,#27935); +#27935 = DEFINITIONAL_REPRESENTATION('',(#27936),#27940); +#27936 = LINE('',#27937,#27938); +#27937 = CARTESIAN_POINT('',(7.016123852284E-13,25.132741228718)); +#27938 = VECTOR('',#27939,1.); +#27939 = DIRECTION('',(1.,0.)); +#27940 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27941 = ORIENTED_EDGE('',*,*,#27942,.T.); +#27942 = EDGE_CURVE('',#27920,#27920,#27943,.T.); +#27943 = SURFACE_CURVE('',#27944,(#27959,#27966),.PCURVE_S1.); +#27944 = ( BOUNDED_CURVE() B_SPLINE_CURVE(13,(#27945,#27946,#27947, + #27948,#27949,#27950,#27951,#27952,#27953,#27954,#27955,#27956, +#27957,#27958),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,13,13 + ,1),(-25.13274122871,4.970488814277E-16,25.132741228718, +50.265482457436),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,1.,1.000000000001,0.999999999997, + 1.000000000006,0.999999999991,1.000000000009,0.999999999992, + 1.000000000006,0.999999999996,1.000000000002,0.999999999999,1.,1.)) +REPRESENTATION_ITEM('') ); +#27945 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,3.238178046004)); +#27946 = CARTESIAN_POINT('',(-4.000000000001,1.905321418822, + 3.238178046004)); +#27947 = CARTESIAN_POINT('',(-3.015267027679,3.854580985394, + 3.238178046004)); +#27948 = CARTESIAN_POINT('',(-0.988824457305,5.248384513409, + 3.238178046004)); +#27949 = CARTESIAN_POINT('',(1.799817736615,5.462446172588, + 3.238178046004)); +#27950 = CARTESIAN_POINT('',(4.208872671042,3.976872241642, + 3.238178046004)); +#27951 = CARTESIAN_POINT('',(5.97566140596,1.80826619315,3.238178046004) + ); +#27952 = CARTESIAN_POINT('',(5.975661406084,-1.808266193181, + 3.238178046004)); +#27953 = CARTESIAN_POINT('',(4.208872670967,-3.976872241588, + 3.238178046004)); +#27954 = CARTESIAN_POINT('',(1.79981773664,-5.462446172636, + 3.238178046004)); +#27955 = CARTESIAN_POINT('',(-0.988824457304,-5.248384513387, + 3.238178046004)); +#27956 = CARTESIAN_POINT('',(-3.015267027683,-3.8545809854, + 3.238178046004)); +#27957 = CARTESIAN_POINT('',(-4.,-1.905321418822,3.238178046004)); +#27958 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,3.238178046004)); +#27959 = PCURVE('',#26947,#27960); +#27960 = DEFINITIONAL_REPRESENTATION('',(#27961),#27965); +#27961 = LINE('',#27962,#27963); +#27962 = CARTESIAN_POINT('',(25.132741228718,0.)); +#27963 = VECTOR('',#27964,1.); +#27964 = DIRECTION('',(0.,1.)); +#27965 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#27966 = PCURVE('',#27967,#27972); +#27967 = CYLINDRICAL_SURFACE('',#27968,4.); +#27968 = AXIS2_PLACEMENT_3D('',#27969,#27970,#27971); +#27969 = CARTESIAN_POINT('',(0.,0.,3.2)); +#27970 = DIRECTION('',(0.,0.,1.)); +#27971 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#27972 = DEFINITIONAL_REPRESENTATION('',(#27973),#27999); +#27973 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#27974,#27975,#27976,#27977, + #27978,#27979,#27980,#27981,#27982,#27983,#27984,#27985,#27986, + #27987,#27988,#27989,#27990,#27991,#27992,#27993,#27994,#27995, + #27996,#27997,#27998),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1 + ,1,1,1,1,1,1,1,1,1,1,4),(4.970488814277E-16,1.142397328578, + 2.284794657156,3.427191985734,4.569589314312,5.71198664289, + 6.854383971469,7.996781300047,9.139178628625,10.281575957203, + 11.423973285781,12.566370614359,13.708767942937,14.851165271515, + 15.993562600093,17.135959928671,18.278357257249,19.420754585828, + 20.563151914406,21.705549242984,22.847946571562,23.99034390014, + 25.132741228718),.QUASI_UNIFORM_KNOTS.); +#27974 = CARTESIAN_POINT('',(6.28318530718,3.8178046004E-02)); +#27975 = CARTESIAN_POINT('',(6.189328461459,3.8178046004E-02)); +#27976 = CARTESIAN_POINT('',(6.000569517416,3.8178046004E-02)); +#27977 = CARTESIAN_POINT('',(5.715310708576,3.8178046004E-02)); +#27978 = CARTESIAN_POINT('',(5.429076399901,3.8178046004E-02)); +#27979 = CARTESIAN_POINT('',(5.142558136645,3.8178046004E-02)); +#27980 = CARTESIAN_POINT('',(4.856167280849,3.8178046004E-02)); +#27981 = CARTESIAN_POINT('',(4.570033461293,3.8178046004E-02)); +#27982 = CARTESIAN_POINT('',(4.284140690769,3.8178046004E-02)); +#27983 = CARTESIAN_POINT('',(3.99841915947,3.8178046004E-02)); +#27984 = CARTESIAN_POINT('',(3.712790418604,3.8178046004E-02)); +#27985 = CARTESIAN_POINT('',(3.427191456113,3.8178046004E-02)); +#27986 = CARTESIAN_POINT('',(3.14159265359,3.8178046004E-02)); +#27987 = CARTESIAN_POINT('',(2.855993851066,3.8178046004E-02)); +#27988 = CARTESIAN_POINT('',(2.570394888575,3.8178046004E-02)); +#27989 = CARTESIAN_POINT('',(2.28476614771,3.8178046004E-02)); +#27990 = CARTESIAN_POINT('',(1.999044616411,3.8178046004E-02)); +#27991 = CARTESIAN_POINT('',(1.713151845887,3.8178046004E-02)); +#27992 = CARTESIAN_POINT('',(1.42701802633,3.8178046004E-02)); +#27993 = CARTESIAN_POINT('',(1.140627170535,3.8178046004E-02)); +#27994 = CARTESIAN_POINT('',(0.854108907278,3.8178046004E-02)); +#27995 = CARTESIAN_POINT('',(0.567874598603,3.8178046004E-02)); +#27996 = CARTESIAN_POINT('',(0.282615789764,3.8178046004E-02)); +#27997 = CARTESIAN_POINT('',(9.385684572072E-02,3.8178046004E-02)); +#27998 = CARTESIAN_POINT('',(0.,3.8178046004E-02)); +#27999 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28000 = ORIENTED_EDGE('',*,*,#27919,.F.); +#28001 = ORIENTED_EDGE('',*,*,#26900,.F.); +#28002 = ADVANCED_FACE('',(#28003),#27018,.F.); +#28003 = FACE_BOUND('',#28004,.F.); +#28004 = EDGE_LOOP('',(#28005,#28031,#28032,#28060,#28089,#28115,#28116, + #28142,#28143,#28164,#28165,#28193,#28222,#28248,#28249,#28270)); +#28005 = ORIENTED_EDGE('',*,*,#28006,.F.); +#28006 = EDGE_CURVE('',#27750,#27499,#28007,.T.); +#28007 = SURFACE_CURVE('',#28008,(#28013,#28024),.PCURVE_S1.); +#28008 = CIRCLE('',#28009,0.4); +#28009 = AXIS2_PLACEMENT_3D('',#28010,#28011,#28012); +#28010 = CARTESIAN_POINT('',(3.75,-3.75,0.15)); +#28011 = DIRECTION('',(0.,0.,-1.)); +#28012 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#28013 = PCURVE('',#27018,#28014); +#28014 = DEFINITIONAL_REPRESENTATION('',(#28015),#28023); +#28015 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#28016,#28017,#28018,#28019 + ,#28020,#28021,#28022),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#28016 = CARTESIAN_POINT('',(-3.585263811922,3.35)); +#28017 = CARTESIAN_POINT('',(-4.27808413495,3.35)); +#28018 = CARTESIAN_POINT('',(-3.931673973436,3.95)); +#28019 = CARTESIAN_POINT('',(-3.585263811922,4.55)); +#28020 = CARTESIAN_POINT('',(-3.238853650408,3.95)); +#28021 = CARTESIAN_POINT('',(-2.892443488894,3.35)); +#28022 = CARTESIAN_POINT('',(-3.585263811922,3.35)); +#28023 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28024 = PCURVE('',#27516,#28025); +#28025 = DEFINITIONAL_REPRESENTATION('',(#28026),#28030); +#28026 = LINE('',#28027,#28028); +#28027 = CARTESIAN_POINT('',(7.853981633974,0.)); +#28028 = VECTOR('',#28029,1.); +#28029 = DIRECTION('',(-1.,0.)); +#28030 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28031 = ORIENTED_EDGE('',*,*,#27749,.T.); +#28032 = ORIENTED_EDGE('',*,*,#28033,.F.); +#28033 = EDGE_CURVE('',#28034,#27752,#28036,.T.); +#28034 = VERTEX_POINT('',#28035); +#28035 = CARTESIAN_POINT('',(1.425,-0.325,0.15)); +#28036 = SURFACE_CURVE('',#28037,(#28041,#28048),.PCURVE_S1.); +#28037 = LINE('',#28038,#28039); +#28038 = CARTESIAN_POINT('',(1.425,-0.325,0.15)); +#28039 = VECTOR('',#28040,1.); +#28040 = DIRECTION('',(1.,-2.115391936753E-16,0.)); +#28041 = PCURVE('',#27018,#28042); +#28042 = DEFINITIONAL_REPRESENTATION('',(#28043),#28047); +#28043 = LINE('',#28044,#28045); +#28044 = CARTESIAN_POINT('',(-1.260263811922,0.325)); +#28045 = VECTOR('',#28046,1.); +#28046 = DIRECTION('',(-1.,8.90745137606E-17)); +#28047 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28048 = PCURVE('',#28049,#28054); +#28049 = PLANE('',#28050); +#28050 = AXIS2_PLACEMENT_3D('',#28051,#28052,#28053); +#28051 = CARTESIAN_POINT('',(1.425,-0.325,0.)); +#28052 = DIRECTION('',(2.115391936753E-16,1.,0.)); +#28053 = DIRECTION('',(1.,-2.115391936753E-16,0.)); +#28054 = DEFINITIONAL_REPRESENTATION('',(#28055),#28059); +#28055 = LINE('',#28056,#28057); +#28056 = CARTESIAN_POINT('',(0.,-0.15)); +#28057 = VECTOR('',#28058,1.); +#28058 = DIRECTION('',(1.,0.)); +#28059 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28060 = ORIENTED_EDGE('',*,*,#28061,.F.); +#28061 = EDGE_CURVE('',#28062,#28034,#28064,.T.); +#28062 = VERTEX_POINT('',#28063); +#28063 = CARTESIAN_POINT('',(1.425,0.325,0.15)); +#28064 = SURFACE_CURVE('',#28065,(#28070,#28077),.PCURVE_S1.); +#28065 = CIRCLE('',#28066,0.325); +#28066 = AXIS2_PLACEMENT_3D('',#28067,#28068,#28069); +#28067 = CARTESIAN_POINT('',(1.425,-4.045354889883E-16,0.15)); +#28068 = DIRECTION('',(0.,0.,1.)); +#28069 = DIRECTION('',(-1.121498978171E-15,1.,0.)); +#28070 = PCURVE('',#27018,#28071); +#28071 = DEFINITIONAL_REPRESENTATION('',(#28072),#28076); +#28072 = CIRCLE('',#28073,0.325); +#28073 = AXIS2_PLACEMENT_2D('',#28074,#28075); +#28074 = CARTESIAN_POINT('',(-1.260263811922,3.409470837078E-16)); +#28075 = DIRECTION('',(1.243963658086E-15,-1.)); +#28076 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28077 = PCURVE('',#28078,#28083); +#28078 = CYLINDRICAL_SURFACE('',#28079,0.325); +#28079 = AXIS2_PLACEMENT_3D('',#28080,#28081,#28082); +#28080 = CARTESIAN_POINT('',(1.425,-4.045354889883E-16,0.)); +#28081 = DIRECTION('',(-0.,0.,-1.)); +#28082 = DIRECTION('',(-1.121498978171E-15,1.,0.)); +#28083 = DEFINITIONAL_REPRESENTATION('',(#28084),#28088); +#28084 = LINE('',#28085,#28086); +#28085 = CARTESIAN_POINT('',(6.28318530718,-0.15)); +#28086 = VECTOR('',#28087,1.); +#28087 = DIRECTION('',(-1.,0.)); +#28088 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28089 = ORIENTED_EDGE('',*,*,#28090,.F.); +#28090 = EDGE_CURVE('',#27868,#28062,#28091,.T.); +#28091 = SURFACE_CURVE('',#28092,(#28096,#28103),.PCURVE_S1.); +#28092 = LINE('',#28093,#28094); +#28093 = CARTESIAN_POINT('',(4.75,0.325,0.15)); +#28094 = VECTOR('',#28095,1.); +#28095 = DIRECTION('',(-1.,2.449293598295E-16,0.)); +#28096 = PCURVE('',#27018,#28097); +#28097 = DEFINITIONAL_REPRESENTATION('',(#28098),#28102); +#28098 = LINE('',#28099,#28100); +#28099 = CARTESIAN_POINT('',(-4.585263811922,-0.325)); +#28100 = VECTOR('',#28101,1.); +#28101 = DIRECTION('',(1.,-1.224646799148E-16)); +#28102 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28103 = PCURVE('',#28104,#28109); +#28104 = PLANE('',#28105); +#28105 = AXIS2_PLACEMENT_3D('',#28106,#28107,#28108); +#28106 = CARTESIAN_POINT('',(4.75,0.325,0.)); +#28107 = DIRECTION('',(-2.449293598295E-16,-1.,0.)); +#28108 = DIRECTION('',(-1.,2.449293598295E-16,0.)); +#28109 = DEFINITIONAL_REPRESENTATION('',(#28110),#28114); +#28110 = LINE('',#28111,#28112); +#28111 = CARTESIAN_POINT('',(0.,-0.15)); +#28112 = VECTOR('',#28113,1.); +#28113 = DIRECTION('',(1.,0.)); +#28114 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28115 = ORIENTED_EDGE('',*,*,#27867,.T.); +#28116 = ORIENTED_EDGE('',*,*,#28117,.F.); +#28117 = EDGE_CURVE('',#27348,#27845,#28118,.T.); +#28118 = SURFACE_CURVE('',#28119,(#28124,#28135),.PCURVE_S1.); +#28119 = CIRCLE('',#28120,0.4); +#28120 = AXIS2_PLACEMENT_3D('',#28121,#28122,#28123); +#28121 = CARTESIAN_POINT('',(3.75,3.75,0.15)); +#28122 = DIRECTION('',(0.,0.,-1.)); +#28123 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#28124 = PCURVE('',#27018,#28125); +#28125 = DEFINITIONAL_REPRESENTATION('',(#28126),#28134); +#28126 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#28127,#28128,#28129,#28130 + ,#28131,#28132,#28133),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#28127 = CARTESIAN_POINT('',(-3.585263811922,-4.15)); +#28128 = CARTESIAN_POINT('',(-4.27808413495,-4.15)); +#28129 = CARTESIAN_POINT('',(-3.931673973436,-3.55)); +#28130 = CARTESIAN_POINT('',(-3.585263811922,-2.95)); +#28131 = CARTESIAN_POINT('',(-3.238853650408,-3.55)); +#28132 = CARTESIAN_POINT('',(-2.892443488894,-4.15)); +#28133 = CARTESIAN_POINT('',(-3.585263811922,-4.15)); +#28134 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28135 = PCURVE('',#27388,#28136); +#28136 = DEFINITIONAL_REPRESENTATION('',(#28137),#28141); +#28137 = LINE('',#28138,#28139); +#28138 = CARTESIAN_POINT('',(6.28318530718,0.)); +#28139 = VECTOR('',#28140,1.); +#28140 = DIRECTION('',(-1.,0.)); +#28141 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28142 = ORIENTED_EDGE('',*,*,#27347,.T.); +#28143 = ORIENTED_EDGE('',*,*,#28144,.T.); +#28144 = EDGE_CURVE('',#27350,#27001,#28145,.T.); +#28145 = SURFACE_CURVE('',#28146,(#28150,#28157),.PCURVE_S1.); +#28146 = LINE('',#28147,#28148); +#28147 = CARTESIAN_POINT('',(-3.15,4.15,0.15)); +#28148 = VECTOR('',#28149,1.); +#28149 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#28150 = PCURVE('',#27018,#28151); +#28151 = DEFINITIONAL_REPRESENTATION('',(#28152),#28156); +#28152 = LINE('',#28153,#28154); +#28153 = CARTESIAN_POINT('',(3.314736188078,-4.15)); +#28154 = VECTOR('',#28155,1.); +#28155 = DIRECTION('',(0.707106781187,0.707106781187)); +#28156 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28157 = PCURVE('',#27046,#28158); +#28158 = DEFINITIONAL_REPRESENTATION('',(#28159),#28163); +#28159 = LINE('',#28160,#28161); +#28160 = CARTESIAN_POINT('',(0.,0.)); +#28161 = VECTOR('',#28162,1.); +#28162 = DIRECTION('',(1.,0.)); +#28163 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28164 = ORIENTED_EDGE('',*,*,#27000,.T.); +#28165 = ORIENTED_EDGE('',*,*,#28166,.F.); +#28166 = EDGE_CURVE('',#28167,#27003,#28169,.T.); +#28167 = VERTEX_POINT('',#28168); +#28168 = CARTESIAN_POINT('',(-1.425,0.325,0.15)); +#28169 = SURFACE_CURVE('',#28170,(#28174,#28181),.PCURVE_S1.); +#28170 = LINE('',#28171,#28172); +#28171 = CARTESIAN_POINT('',(-1.425,0.325,0.15)); +#28172 = VECTOR('',#28173,1.); +#28173 = DIRECTION('',(-1.,8.90745137606E-17,0.)); +#28174 = PCURVE('',#27018,#28175); +#28175 = DEFINITIONAL_REPRESENTATION('',(#28176),#28180); +#28176 = LINE('',#28177,#28178); +#28177 = CARTESIAN_POINT('',(1.589736188078,-0.325)); +#28178 = VECTOR('',#28179,1.); +#28179 = DIRECTION('',(1.,3.33901661541E-17)); +#28180 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28181 = PCURVE('',#28182,#28187); +#28182 = PLANE('',#28183); +#28183 = AXIS2_PLACEMENT_3D('',#28184,#28185,#28186); +#28184 = CARTESIAN_POINT('',(-1.425,0.325,0.)); +#28185 = DIRECTION('',(-8.90745137606E-17,-1.,0.)); +#28186 = DIRECTION('',(-1.,8.90745137606E-17,0.)); +#28187 = DEFINITIONAL_REPRESENTATION('',(#28188),#28192); +#28188 = LINE('',#28189,#28190); +#28189 = CARTESIAN_POINT('',(0.,-0.15)); +#28190 = VECTOR('',#28191,1.); +#28191 = DIRECTION('',(1.,0.)); +#28192 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28193 = ORIENTED_EDGE('',*,*,#28194,.F.); +#28194 = EDGE_CURVE('',#28195,#28167,#28197,.T.); +#28195 = VERTEX_POINT('',#28196); +#28196 = CARTESIAN_POINT('',(-1.425,-0.325,0.15)); +#28197 = SURFACE_CURVE('',#28198,(#28203,#28210),.PCURVE_S1.); +#28198 = CIRCLE('',#28199,0.325); +#28199 = AXIS2_PLACEMENT_3D('',#28200,#28201,#28202); +#28200 = CARTESIAN_POINT('',(-1.425,2.300233201098E-16,0.15)); +#28201 = DIRECTION('',(-0.,0.,1.)); +#28202 = DIRECTION('',(1.243963658085E-15,-1.,0.)); +#28203 = PCURVE('',#27018,#28204); +#28204 = DEFINITIONAL_REPRESENTATION('',(#28205),#28209); +#28205 = CIRCLE('',#28206,0.325); +#28206 = AXIS2_PLACEMENT_2D('',#28207,#28208); +#28207 = CARTESIAN_POINT('',(1.589736188078,5.541261236658E-17)); +#28208 = DIRECTION('',(-1.366428338E-15,1.)); +#28209 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28210 = PCURVE('',#28211,#28216); +#28211 = CYLINDRICAL_SURFACE('',#28212,0.325); +#28212 = AXIS2_PLACEMENT_3D('',#28213,#28214,#28215); +#28213 = CARTESIAN_POINT('',(-1.425,2.300233201098E-16,0.)); +#28214 = DIRECTION('',(0.,0.,-1.)); +#28215 = DIRECTION('',(1.243963658085E-15,-1.,0.)); +#28216 = DEFINITIONAL_REPRESENTATION('',(#28217),#28221); +#28217 = LINE('',#28218,#28219); +#28218 = CARTESIAN_POINT('',(6.28318530718,-0.15)); +#28219 = VECTOR('',#28220,1.); +#28220 = DIRECTION('',(-1.,0.)); +#28221 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28222 = ORIENTED_EDGE('',*,*,#28223,.F.); +#28223 = EDGE_CURVE('',#27188,#28195,#28224,.T.); +#28224 = SURFACE_CURVE('',#28225,(#28229,#28236),.PCURVE_S1.); +#28225 = LINE('',#28226,#28227); +#28226 = CARTESIAN_POINT('',(-4.75,-0.325,0.15)); +#28227 = VECTOR('',#28228,1.); +#28228 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#28229 = PCURVE('',#27018,#28230); +#28230 = DEFINITIONAL_REPRESENTATION('',(#28231),#28235); +#28231 = LINE('',#28232,#28233); +#28232 = CARTESIAN_POINT('',(4.914736188078,0.325)); +#28233 = VECTOR('',#28234,1.); +#28234 = DIRECTION('',(-1.,1.308421422143E-95)); +#28235 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28236 = PCURVE('',#28237,#28242); +#28237 = PLANE('',#28238); +#28238 = AXIS2_PLACEMENT_3D('',#28239,#28240,#28241); +#28239 = CARTESIAN_POINT('',(-4.75,-0.325,0.)); +#28240 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#28241 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#28242 = DEFINITIONAL_REPRESENTATION('',(#28243),#28247); +#28243 = LINE('',#28244,#28245); +#28244 = CARTESIAN_POINT('',(0.,-0.15)); +#28245 = VECTOR('',#28246,1.); +#28246 = DIRECTION('',(1.,0.)); +#28247 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28248 = ORIENTED_EDGE('',*,*,#27187,.T.); +#28249 = ORIENTED_EDGE('',*,*,#28250,.T.); +#28250 = EDGE_CURVE('',#27160,#27529,#28251,.T.); +#28251 = SURFACE_CURVE('',#28252,(#28256,#28263),.PCURVE_S1.); +#28252 = LINE('',#28253,#28254); +#28253 = CARTESIAN_POINT('',(-4.15,-3.15,0.15)); +#28254 = VECTOR('',#28255,1.); +#28255 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#28256 = PCURVE('',#27018,#28257); +#28257 = DEFINITIONAL_REPRESENTATION('',(#28258),#28262); +#28258 = LINE('',#28259,#28260); +#28259 = CARTESIAN_POINT('',(4.314736188078,3.15)); +#28260 = VECTOR('',#28261,1.); +#28261 = DIRECTION('',(-0.707106781187,0.707106781187)); +#28262 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28263 = PCURVE('',#27175,#28264); +#28264 = DEFINITIONAL_REPRESENTATION('',(#28265),#28269); +#28265 = LINE('',#28266,#28267); +#28266 = CARTESIAN_POINT('',(0.,0.)); +#28267 = VECTOR('',#28268,1.); +#28268 = DIRECTION('',(1.,0.)); +#28269 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28270 = ORIENTED_EDGE('',*,*,#27528,.T.); +#28271 = ADVANCED_FACE('',(#28272),#27046,.F.); +#28272 = FACE_BOUND('',#28273,.F.); +#28273 = EDGE_LOOP('',(#28274,#28275,#28276,#28297)); +#28274 = ORIENTED_EDGE('',*,*,#28144,.F.); +#28275 = ORIENTED_EDGE('',*,*,#27474,.T.); +#28276 = ORIENTED_EDGE('',*,*,#28277,.T.); +#28277 = EDGE_CURVE('',#27452,#27031,#28278,.T.); +#28278 = SURFACE_CURVE('',#28279,(#28283,#28290),.PCURVE_S1.); +#28279 = LINE('',#28280,#28281); +#28280 = CARTESIAN_POINT('',(-2.3625,4.9375,0.85)); +#28281 = VECTOR('',#28282,1.); +#28282 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#28283 = PCURVE('',#27046,#28284); +#28284 = DEFINITIONAL_REPRESENTATION('',(#28285),#28289); +#28285 = LINE('',#28286,#28287); +#28286 = CARTESIAN_POINT('',(-1.113693180369,-0.7)); +#28287 = VECTOR('',#28288,1.); +#28288 = DIRECTION('',(1.,0.)); +#28289 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28290 = PCURVE('',#27074,#28291); +#28291 = DEFINITIONAL_REPRESENTATION('',(#28292),#28296); +#28292 = LINE('',#28293,#28294); +#28293 = CARTESIAN_POINT('',(2.3625,-0.7875)); +#28294 = VECTOR('',#28295,1.); +#28295 = DIRECTION('',(0.707106781187,0.707106781187)); +#28296 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28297 = ORIENTED_EDGE('',*,*,#27030,.F.); +#28298 = ADVANCED_FACE('',(#28299),#27224,.T.); +#28299 = FACE_BOUND('',#28300,.T.); +#28300 = EDGE_LOOP('',(#28301,#28324,#28352,#28373)); +#28301 = ORIENTED_EDGE('',*,*,#28302,.T.); +#28302 = EDGE_CURVE('',#27003,#28303,#28305,.T.); +#28303 = VERTEX_POINT('',#28304); +#28304 = CARTESIAN_POINT('',(-4.75,0.325,0.15)); +#28305 = SURFACE_CURVE('',#28306,(#28310,#28317),.PCURVE_S1.); +#28306 = LINE('',#28307,#28308); +#28307 = CARTESIAN_POINT('',(-1.425,0.325,0.15)); +#28308 = VECTOR('',#28309,1.); +#28309 = DIRECTION('',(-1.,8.90745137606E-17,0.)); +#28310 = PCURVE('',#27224,#28311); +#28311 = DEFINITIONAL_REPRESENTATION('',(#28312),#28316); +#28312 = LINE('',#28313,#28314); +#28313 = CARTESIAN_POINT('',(-1.575096934556,-0.325)); +#28314 = VECTOR('',#28315,1.); +#28315 = DIRECTION('',(1.,3.33901661541E-17)); +#28316 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28317 = PCURVE('',#28182,#28318); +#28318 = DEFINITIONAL_REPRESENTATION('',(#28319),#28323); +#28319 = LINE('',#28320,#28321); +#28320 = CARTESIAN_POINT('',(0.,-0.15)); +#28321 = VECTOR('',#28322,1.); +#28322 = DIRECTION('',(1.,0.)); +#28323 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28324 = ORIENTED_EDGE('',*,*,#28325,.T.); +#28325 = EDGE_CURVE('',#28303,#28326,#28328,.T.); +#28326 = VERTEX_POINT('',#28327); +#28327 = CARTESIAN_POINT('',(-4.75,-0.325,0.15)); +#28328 = SURFACE_CURVE('',#28329,(#28333,#28340),.PCURVE_S1.); +#28329 = LINE('',#28330,#28331); +#28330 = CARTESIAN_POINT('',(-4.75,0.325,0.15)); +#28331 = VECTOR('',#28332,1.); +#28332 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#28333 = PCURVE('',#27224,#28334); +#28334 = DEFINITIONAL_REPRESENTATION('',(#28335),#28339); +#28335 = LINE('',#28336,#28337); +#28336 = CARTESIAN_POINT('',(1.749903065444,-0.325)); +#28337 = VECTOR('',#28338,1.); +#28338 = DIRECTION('',(0.,1.)); +#28339 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28340 = PCURVE('',#28341,#28346); +#28341 = PLANE('',#28342); +#28342 = AXIS2_PLACEMENT_3D('',#28343,#28344,#28345); +#28343 = CARTESIAN_POINT('',(-4.75,0.325,0.)); +#28344 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#28345 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#28346 = DEFINITIONAL_REPRESENTATION('',(#28347),#28351); +#28347 = LINE('',#28348,#28349); +#28348 = CARTESIAN_POINT('',(0.,-0.15)); +#28349 = VECTOR('',#28350,1.); +#28350 = DIRECTION('',(1.,0.)); +#28351 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28352 = ORIENTED_EDGE('',*,*,#28353,.T.); +#28353 = EDGE_CURVE('',#28326,#27188,#28354,.T.); +#28354 = SURFACE_CURVE('',#28355,(#28359,#28366),.PCURVE_S1.); +#28355 = LINE('',#28356,#28357); +#28356 = CARTESIAN_POINT('',(-4.75,-0.325,0.15)); +#28357 = VECTOR('',#28358,1.); +#28358 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#28359 = PCURVE('',#27224,#28360); +#28360 = DEFINITIONAL_REPRESENTATION('',(#28361),#28365); +#28361 = LINE('',#28362,#28363); +#28362 = CARTESIAN_POINT('',(1.749903065444,0.325)); +#28363 = VECTOR('',#28364,1.); +#28364 = DIRECTION('',(-1.,0.)); +#28365 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28366 = PCURVE('',#28237,#28367); +#28367 = DEFINITIONAL_REPRESENTATION('',(#28368),#28372); +#28368 = LINE('',#28369,#28370); +#28369 = CARTESIAN_POINT('',(0.,-0.15)); +#28370 = VECTOR('',#28371,1.); +#28371 = DIRECTION('',(1.,0.)); +#28372 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28373 = ORIENTED_EDGE('',*,*,#27210,.F.); +#28374 = ADVANCED_FACE('',(#28375),#27074,.T.); +#28375 = FACE_BOUND('',#28376,.T.); +#28376 = EDGE_LOOP('',(#28377,#28378,#28379,#28380)); +#28377 = ORIENTED_EDGE('',*,*,#27264,.T.); +#28378 = ORIENTED_EDGE('',*,*,#27451,.T.); +#28379 = ORIENTED_EDGE('',*,*,#28277,.T.); +#28380 = ORIENTED_EDGE('',*,*,#27058,.T.); +#28381 = ADVANCED_FACE('',(#28382),#27175,.F.); +#28382 = FACE_BOUND('',#28383,.F.); +#28383 = EDGE_LOOP('',(#28384,#28385,#28386,#28407)); +#28384 = ORIENTED_EDGE('',*,*,#28250,.F.); +#28385 = ORIENTED_EDGE('',*,*,#27159,.T.); +#28386 = ORIENTED_EDGE('',*,*,#28387,.T.); +#28387 = EDGE_CURVE('',#27132,#27552,#28388,.T.); +#28388 = SURFACE_CURVE('',#28389,(#28393,#28400),.PCURVE_S1.); +#28389 = LINE('',#28390,#28391); +#28390 = CARTESIAN_POINT('',(-4.9375,-2.3625,0.85)); +#28391 = VECTOR('',#28392,1.); +#28392 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#28393 = PCURVE('',#27175,#28394); +#28394 = DEFINITIONAL_REPRESENTATION('',(#28395),#28399); +#28395 = LINE('',#28396,#28397); +#28396 = CARTESIAN_POINT('',(-1.113693180369,-0.7)); +#28397 = VECTOR('',#28398,1.); +#28398 = DIRECTION('',(1.,0.)); +#28399 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28400 = PCURVE('',#27147,#28401); +#28401 = DEFINITIONAL_REPRESENTATION('',(#28402),#28406); +#28402 = LINE('',#28403,#28404); +#28403 = CARTESIAN_POINT('',(4.9375,6.5125)); +#28404 = VECTOR('',#28405,1.); +#28405 = DIRECTION('',(-0.707106781187,0.707106781187)); +#28406 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28407 = ORIENTED_EDGE('',*,*,#27551,.F.); +#28408 = ADVANCED_FACE('',(#28409),#27147,.T.); +#28409 = FACE_BOUND('',#28410,.T.); +#28410 = EDGE_LOOP('',(#28411,#28412,#28413,#28414)); +#28411 = ORIENTED_EDGE('',*,*,#27574,.F.); +#28412 = ORIENTED_EDGE('',*,*,#27316,.T.); +#28413 = ORIENTED_EDGE('',*,*,#27131,.T.); +#28414 = ORIENTED_EDGE('',*,*,#28387,.T.); +#28415 = ADVANCED_FACE('',(#28416),#27416,.T.); +#28416 = FACE_BOUND('',#28417,.T.); +#28417 = EDGE_LOOP('',(#28418,#28419,#28420,#28446)); +#28418 = ORIENTED_EDGE('',*,*,#27649,.F.); +#28419 = ORIENTED_EDGE('',*,*,#27821,.T.); +#28420 = ORIENTED_EDGE('',*,*,#28421,.F.); +#28421 = EDGE_CURVE('',#27373,#27822,#28422,.T.); +#28422 = SURFACE_CURVE('',#28423,(#28428,#28439),.PCURVE_S1.); +#28423 = CIRCLE('',#28424,0.4); +#28424 = AXIS2_PLACEMENT_3D('',#28425,#28426,#28427); +#28425 = CARTESIAN_POINT('',(3.75,3.75,1.15)); +#28426 = DIRECTION('',(0.,0.,-1.)); +#28427 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#28428 = PCURVE('',#27416,#28429); +#28429 = DEFINITIONAL_REPRESENTATION('',(#28430),#28438); +#28430 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#28431,#28432,#28433,#28434 + ,#28435,#28436,#28437),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#28431 = CARTESIAN_POINT('',(-3.585263811922,-4.15)); +#28432 = CARTESIAN_POINT('',(-4.27808413495,-4.15)); +#28433 = CARTESIAN_POINT('',(-3.931673973436,-3.55)); +#28434 = CARTESIAN_POINT('',(-3.585263811922,-2.95)); +#28435 = CARTESIAN_POINT('',(-3.238853650408,-3.55)); +#28436 = CARTESIAN_POINT('',(-2.892443488894,-4.15)); +#28437 = CARTESIAN_POINT('',(-3.585263811922,-4.15)); +#28438 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28439 = PCURVE('',#27388,#28440); +#28440 = DEFINITIONAL_REPRESENTATION('',(#28441),#28445); +#28441 = LINE('',#28442,#28443); +#28442 = CARTESIAN_POINT('',(6.28318530718,1.)); +#28443 = VECTOR('',#28444,1.); +#28444 = DIRECTION('',(-1.,0.)); +#28445 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28446 = ORIENTED_EDGE('',*,*,#27400,.T.); +#28447 = ADVANCED_FACE('',(#28448),#27388,.T.); +#28448 = FACE_BOUND('',#28449,.T.); +#28449 = EDGE_LOOP('',(#28450,#28451,#28452,#28453)); +#28450 = ORIENTED_EDGE('',*,*,#27372,.T.); +#28451 = ORIENTED_EDGE('',*,*,#28421,.T.); +#28452 = ORIENTED_EDGE('',*,*,#27844,.F.); +#28453 = ORIENTED_EDGE('',*,*,#28117,.F.); +#28454 = ADVANCED_FACE('',(#28455),#27516,.T.); +#28455 = FACE_BOUND('',#28456,.T.); +#28456 = EDGE_LOOP('',(#28457,#28458,#28484,#28485)); +#28457 = ORIENTED_EDGE('',*,*,#27774,.T.); +#28458 = ORIENTED_EDGE('',*,*,#28459,.T.); +#28459 = EDGE_CURVE('',#27775,#27501,#28460,.T.); +#28460 = SURFACE_CURVE('',#28461,(#28466,#28473),.PCURVE_S1.); +#28461 = CIRCLE('',#28462,0.4); +#28462 = AXIS2_PLACEMENT_3D('',#28463,#28464,#28465); +#28463 = CARTESIAN_POINT('',(3.75,-3.75,1.15)); +#28464 = DIRECTION('',(0.,0.,-1.)); +#28465 = DIRECTION('',(1.224646799147E-16,1.,0.)); +#28466 = PCURVE('',#27516,#28467); +#28467 = DEFINITIONAL_REPRESENTATION('',(#28468),#28472); +#28468 = LINE('',#28469,#28470); +#28469 = CARTESIAN_POINT('',(7.853981633974,1.)); +#28470 = VECTOR('',#28471,1.); +#28471 = DIRECTION('',(-1.,0.)); +#28472 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28473 = PCURVE('',#27634,#28474); +#28474 = DEFINITIONAL_REPRESENTATION('',(#28475),#28483); +#28475 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#28476,#28477,#28478,#28479 + ,#28480,#28481,#28482),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#28476 = CARTESIAN_POINT('',(-3.585263811922,3.35)); +#28477 = CARTESIAN_POINT('',(-4.27808413495,3.35)); +#28478 = CARTESIAN_POINT('',(-3.931673973436,3.95)); +#28479 = CARTESIAN_POINT('',(-3.585263811922,4.55)); +#28480 = CARTESIAN_POINT('',(-3.238853650408,3.95)); +#28481 = CARTESIAN_POINT('',(-2.892443488894,3.35)); +#28482 = CARTESIAN_POINT('',(-3.585263811922,3.35)); +#28483 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28484 = ORIENTED_EDGE('',*,*,#27498,.F.); +#28485 = ORIENTED_EDGE('',*,*,#28006,.F.); +#28486 = ADVANCED_FACE('',(#28487),#27634,.T.); +#28487 = FACE_BOUND('',#28488,.T.); +#28488 = EDGE_LOOP('',(#28489,#28490,#28491,#28492)); +#28489 = ORIENTED_EDGE('',*,*,#28459,.F.); +#28490 = ORIENTED_EDGE('',*,*,#27797,.T.); +#28491 = ORIENTED_EDGE('',*,*,#27722,.F.); +#28492 = ORIENTED_EDGE('',*,*,#27620,.T.); +#28493 = ADVANCED_FACE('',(#28494),#27904,.T.); +#28494 = FACE_BOUND('',#28495,.T.); +#28495 = EDGE_LOOP('',(#28496,#28519,#28547,#28568)); +#28496 = ORIENTED_EDGE('',*,*,#28497,.T.); +#28497 = EDGE_CURVE('',#27752,#28498,#28500,.T.); +#28498 = VERTEX_POINT('',#28499); +#28499 = CARTESIAN_POINT('',(4.75,-0.325,0.15)); +#28500 = SURFACE_CURVE('',#28501,(#28505,#28512),.PCURVE_S1.); +#28501 = LINE('',#28502,#28503); +#28502 = CARTESIAN_POINT('',(1.425,-0.325,0.15)); +#28503 = VECTOR('',#28504,1.); +#28504 = DIRECTION('',(1.,-2.115391936753E-16,0.)); +#28505 = PCURVE('',#27904,#28506); +#28506 = DEFINITIONAL_REPRESENTATION('',(#28507),#28511); +#28507 = LINE('',#28508,#28509); +#28508 = CARTESIAN_POINT('',(-1.575096934556,-0.325)); +#28509 = VECTOR('',#28510,1.); +#28510 = DIRECTION('',(1.,3.33901661542E-17)); +#28511 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28512 = PCURVE('',#28049,#28513); +#28513 = DEFINITIONAL_REPRESENTATION('',(#28514),#28518); +#28514 = LINE('',#28515,#28516); +#28515 = CARTESIAN_POINT('',(0.,-0.15)); +#28516 = VECTOR('',#28517,1.); +#28517 = DIRECTION('',(1.,0.)); +#28518 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28519 = ORIENTED_EDGE('',*,*,#28520,.T.); +#28520 = EDGE_CURVE('',#28498,#28521,#28523,.T.); +#28521 = VERTEX_POINT('',#28522); +#28522 = CARTESIAN_POINT('',(4.75,0.325,0.15)); +#28523 = SURFACE_CURVE('',#28524,(#28528,#28535),.PCURVE_S1.); +#28524 = LINE('',#28525,#28526); +#28525 = CARTESIAN_POINT('',(4.75,-0.325,0.15)); +#28526 = VECTOR('',#28527,1.); +#28527 = DIRECTION('',(2.449293598295E-16,1.,0.)); +#28528 = PCURVE('',#27904,#28529); +#28529 = DEFINITIONAL_REPRESENTATION('',(#28530),#28534); +#28530 = LINE('',#28531,#28532); +#28531 = CARTESIAN_POINT('',(1.749903065444,-0.325)); +#28532 = VECTOR('',#28533,1.); +#28533 = DIRECTION('',(0.,1.)); +#28534 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28535 = PCURVE('',#28536,#28541); +#28536 = PLANE('',#28537); +#28537 = AXIS2_PLACEMENT_3D('',#28538,#28539,#28540); +#28538 = CARTESIAN_POINT('',(4.75,-0.325,0.)); +#28539 = DIRECTION('',(-1.,2.449293598295E-16,0.)); +#28540 = DIRECTION('',(2.449293598295E-16,1.,0.)); +#28541 = DEFINITIONAL_REPRESENTATION('',(#28542),#28546); +#28542 = LINE('',#28543,#28544); +#28543 = CARTESIAN_POINT('',(0.,-0.15)); +#28544 = VECTOR('',#28545,1.); +#28545 = DIRECTION('',(1.,0.)); +#28546 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28547 = ORIENTED_EDGE('',*,*,#28548,.T.); +#28548 = EDGE_CURVE('',#28521,#27868,#28549,.T.); +#28549 = SURFACE_CURVE('',#28550,(#28554,#28561),.PCURVE_S1.); +#28550 = LINE('',#28551,#28552); +#28551 = CARTESIAN_POINT('',(4.75,0.325,0.15)); +#28552 = VECTOR('',#28553,1.); +#28553 = DIRECTION('',(-1.,2.449293598295E-16,0.)); +#28554 = PCURVE('',#27904,#28555); +#28555 = DEFINITIONAL_REPRESENTATION('',(#28556),#28560); +#28556 = LINE('',#28557,#28558); +#28557 = CARTESIAN_POINT('',(1.749903065444,0.325)); +#28558 = VECTOR('',#28559,1.); +#28559 = DIRECTION('',(-1.,0.)); +#28560 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28561 = PCURVE('',#28104,#28562); +#28562 = DEFINITIONAL_REPRESENTATION('',(#28563),#28567); +#28563 = LINE('',#28564,#28565); +#28564 = CARTESIAN_POINT('',(0.,-0.15)); +#28565 = VECTOR('',#28566,1.); +#28566 = DIRECTION('',(1.,0.)); +#28567 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28568 = ORIENTED_EDGE('',*,*,#27890,.F.); +#28569 = ADVANCED_FACE('',(#28570),#27967,.T.); +#28570 = FACE_BOUND('',#28571,.T.); +#28571 = EDGE_LOOP('',(#28572,#28573,#28596,#28625,#28654,#28678,#28705) + ); +#28572 = ORIENTED_EDGE('',*,*,#27942,.F.); +#28573 = ORIENTED_EDGE('',*,*,#28574,.T.); +#28574 = EDGE_CURVE('',#27920,#28575,#28577,.T.); +#28575 = VERTEX_POINT('',#28576); +#28576 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,9.966666666667)); +#28577 = SEAM_CURVE('',#28578,(#28582,#28589),.PCURVE_S1.); +#28578 = LINE('',#28579,#28580); +#28579 = CARTESIAN_POINT('',(-4.,4.898587196589E-16,3.2)); +#28580 = VECTOR('',#28581,1.); +#28581 = DIRECTION('',(0.,0.,1.)); +#28582 = PCURVE('',#27967,#28583); +#28583 = DEFINITIONAL_REPRESENTATION('',(#28584),#28588); +#28584 = LINE('',#28585,#28586); +#28585 = CARTESIAN_POINT('',(6.28318530718,0.)); +#28586 = VECTOR('',#28587,1.); +#28587 = DIRECTION('',(0.,1.)); +#28588 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28589 = PCURVE('',#27967,#28590); +#28590 = DEFINITIONAL_REPRESENTATION('',(#28591),#28595); +#28591 = LINE('',#28592,#28593); +#28592 = CARTESIAN_POINT('',(0.,0.)); +#28593 = VECTOR('',#28594,1.); +#28594 = DIRECTION('',(0.,1.)); +#28595 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28596 = ORIENTED_EDGE('',*,*,#28597,.T.); +#28597 = EDGE_CURVE('',#28575,#28598,#28600,.T.); +#28598 = VERTEX_POINT('',#28599); +#28599 = CARTESIAN_POINT('',(1.2,3.815756805668,9.966666666667)); +#28600 = SURFACE_CURVE('',#28601,(#28606,#28613),.PCURVE_S1.); +#28601 = CIRCLE('',#28602,4.); +#28602 = AXIS2_PLACEMENT_3D('',#28603,#28604,#28605); +#28603 = CARTESIAN_POINT('',(0.,0.,9.966666666667)); +#28604 = DIRECTION('',(0.,0.,-1.)); +#28605 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#28606 = PCURVE('',#27967,#28607); +#28607 = DEFINITIONAL_REPRESENTATION('',(#28608),#28612); +#28608 = LINE('',#28609,#28610); +#28609 = CARTESIAN_POINT('',(6.28318530718,6.766666666667)); +#28610 = VECTOR('',#28611,1.); +#28611 = DIRECTION('',(-1.,0.)); +#28612 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28613 = PCURVE('',#28614,#28619); +#28614 = TOROIDAL_SURFACE('',#28615,3.466666666667,0.533333333333); +#28615 = AXIS2_PLACEMENT_3D('',#28616,#28617,#28618); +#28616 = CARTESIAN_POINT('',(0.,0.,9.966666666667)); +#28617 = DIRECTION('',(0.,0.,1.)); +#28618 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#28619 = DEFINITIONAL_REPRESENTATION('',(#28620),#28624); +#28620 = LINE('',#28621,#28622); +#28621 = CARTESIAN_POINT('',(6.28318530718,0.)); +#28622 = VECTOR('',#28623,1.); +#28623 = DIRECTION('',(-1.,0.)); +#28624 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28625 = ORIENTED_EDGE('',*,*,#28626,.T.); +#28626 = EDGE_CURVE('',#28598,#28627,#28629,.T.); +#28627 = VERTEX_POINT('',#28628); +#28628 = CARTESIAN_POINT('',(4.,-2.288475490444E-17,9.966666666667)); +#28629 = SURFACE_CURVE('',#28630,(#28635,#28642),.PCURVE_S1.); +#28630 = CIRCLE('',#28631,4.); +#28631 = AXIS2_PLACEMENT_3D('',#28632,#28633,#28634); +#28632 = CARTESIAN_POINT('',(0.,0.,9.966666666667)); +#28633 = DIRECTION('',(0.,0.,-1.)); +#28634 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#28635 = PCURVE('',#27967,#28636); +#28636 = DEFINITIONAL_REPRESENTATION('',(#28637),#28641); +#28637 = LINE('',#28638,#28639); +#28638 = CARTESIAN_POINT('',(6.28318530718,6.766666666667)); +#28639 = VECTOR('',#28640,1.); +#28640 = DIRECTION('',(-1.,0.)); +#28641 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28642 = PCURVE('',#28643,#28648); +#28643 = TOROIDAL_SURFACE('',#28644,3.466666666667,0.533333333333); +#28644 = AXIS2_PLACEMENT_3D('',#28645,#28646,#28647); +#28645 = CARTESIAN_POINT('',(0.,0.,9.966666666667)); +#28646 = DIRECTION('',(0.,0.,1.)); +#28647 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#28648 = DEFINITIONAL_REPRESENTATION('',(#28649),#28653); +#28649 = LINE('',#28650,#28651); +#28650 = CARTESIAN_POINT('',(6.28318530718,0.)); +#28651 = VECTOR('',#28652,1.); +#28652 = DIRECTION('',(-1.,0.)); +#28653 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28654 = ORIENTED_EDGE('',*,*,#28655,.T.); +#28655 = EDGE_CURVE('',#28627,#28656,#28658,.T.); +#28656 = VERTEX_POINT('',#28657); +#28657 = CARTESIAN_POINT('',(1.2,-3.815756805668,9.966666666667)); +#28658 = SURFACE_CURVE('',#28659,(#28664,#28671),.PCURVE_S1.); +#28659 = CIRCLE('',#28660,4.); +#28660 = AXIS2_PLACEMENT_3D('',#28661,#28662,#28663); +#28661 = CARTESIAN_POINT('',(0.,0.,9.966666666667)); +#28662 = DIRECTION('',(0.,0.,-1.)); +#28663 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#28664 = PCURVE('',#27967,#28665); +#28665 = DEFINITIONAL_REPRESENTATION('',(#28666),#28670); +#28666 = LINE('',#28667,#28668); +#28667 = CARTESIAN_POINT('',(6.28318530718,6.766666666667)); +#28668 = VECTOR('',#28669,1.); +#28669 = DIRECTION('',(-1.,0.)); +#28670 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28671 = PCURVE('',#28643,#28672); +#28672 = DEFINITIONAL_REPRESENTATION('',(#28673),#28677); +#28673 = LINE('',#28674,#28675); +#28674 = CARTESIAN_POINT('',(6.28318530718,0.)); +#28675 = VECTOR('',#28676,1.); +#28676 = DIRECTION('',(-1.,0.)); +#28677 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28678 = ORIENTED_EDGE('',*,*,#28679,.T.); +#28679 = EDGE_CURVE('',#28656,#28575,#28680,.T.); +#28680 = SURFACE_CURVE('',#28681,(#28686,#28693),.PCURVE_S1.); +#28681 = CIRCLE('',#28682,4.); +#28682 = AXIS2_PLACEMENT_3D('',#28683,#28684,#28685); +#28683 = CARTESIAN_POINT('',(0.,0.,9.966666666667)); +#28684 = DIRECTION('',(0.,0.,-1.)); +#28685 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#28686 = PCURVE('',#27967,#28687); +#28687 = DEFINITIONAL_REPRESENTATION('',(#28688),#28692); +#28688 = LINE('',#28689,#28690); +#28689 = CARTESIAN_POINT('',(6.28318530718,6.766666666667)); +#28690 = VECTOR('',#28691,1.); +#28691 = DIRECTION('',(-1.,0.)); +#28692 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28693 = PCURVE('',#28694,#28699); +#28694 = TOROIDAL_SURFACE('',#28695,3.466666666667,0.533333333333); +#28695 = AXIS2_PLACEMENT_3D('',#28696,#28697,#28698); +#28696 = CARTESIAN_POINT('',(0.,0.,9.966666666667)); +#28697 = DIRECTION('',(0.,0.,1.)); +#28698 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#28699 = DEFINITIONAL_REPRESENTATION('',(#28700),#28704); +#28700 = LINE('',#28701,#28702); +#28701 = CARTESIAN_POINT('',(6.28318530718,0.)); +#28702 = VECTOR('',#28703,1.); +#28703 = DIRECTION('',(-1.,0.)); +#28704 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28705 = ORIENTED_EDGE('',*,*,#28574,.F.); +#28706 = ADVANCED_FACE('',(#28707),#28237,.F.); +#28707 = FACE_BOUND('',#28708,.F.); +#28708 = EDGE_LOOP('',(#28709,#28732,#28733,#28734,#28757)); +#28709 = ORIENTED_EDGE('',*,*,#28710,.T.); +#28710 = EDGE_CURVE('',#28711,#28326,#28713,.T.); +#28711 = VERTEX_POINT('',#28712); +#28712 = CARTESIAN_POINT('',(-4.75,-0.325,0.)); +#28713 = SURFACE_CURVE('',#28714,(#28718,#28725),.PCURVE_S1.); +#28714 = LINE('',#28715,#28716); +#28715 = CARTESIAN_POINT('',(-4.75,-0.325,0.)); +#28716 = VECTOR('',#28717,1.); +#28717 = DIRECTION('',(0.,0.,1.)); +#28718 = PCURVE('',#28237,#28719); +#28719 = DEFINITIONAL_REPRESENTATION('',(#28720),#28724); +#28720 = LINE('',#28721,#28722); +#28721 = CARTESIAN_POINT('',(0.,0.)); +#28722 = VECTOR('',#28723,1.); +#28723 = DIRECTION('',(0.,-1.)); +#28724 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28725 = PCURVE('',#28341,#28726); +#28726 = DEFINITIONAL_REPRESENTATION('',(#28727),#28731); +#28727 = LINE('',#28728,#28729); +#28728 = CARTESIAN_POINT('',(0.65,0.)); +#28729 = VECTOR('',#28730,1.); +#28730 = DIRECTION('',(0.,-1.)); +#28731 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28732 = ORIENTED_EDGE('',*,*,#28353,.T.); +#28733 = ORIENTED_EDGE('',*,*,#28223,.T.); +#28734 = ORIENTED_EDGE('',*,*,#28735,.F.); +#28735 = EDGE_CURVE('',#28736,#28195,#28738,.T.); +#28736 = VERTEX_POINT('',#28737); +#28737 = CARTESIAN_POINT('',(-1.425,-0.325,0.)); +#28738 = SURFACE_CURVE('',#28739,(#28743,#28750),.PCURVE_S1.); +#28739 = LINE('',#28740,#28741); +#28740 = CARTESIAN_POINT('',(-1.425,-0.325,0.)); +#28741 = VECTOR('',#28742,1.); +#28742 = DIRECTION('',(0.,0.,1.)); +#28743 = PCURVE('',#28237,#28744); +#28744 = DEFINITIONAL_REPRESENTATION('',(#28745),#28749); +#28745 = LINE('',#28746,#28747); +#28746 = CARTESIAN_POINT('',(3.325,0.)); +#28747 = VECTOR('',#28748,1.); +#28748 = DIRECTION('',(0.,-1.)); +#28749 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28750 = PCURVE('',#28211,#28751); +#28751 = DEFINITIONAL_REPRESENTATION('',(#28752),#28756); +#28752 = LINE('',#28753,#28754); +#28753 = CARTESIAN_POINT('',(6.28318530718,0.)); +#28754 = VECTOR('',#28755,1.); +#28755 = DIRECTION('',(0.,-1.)); +#28756 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28757 = ORIENTED_EDGE('',*,*,#28758,.F.); +#28758 = EDGE_CURVE('',#28711,#28736,#28759,.T.); +#28759 = SURFACE_CURVE('',#28760,(#28764,#28771),.PCURVE_S1.); +#28760 = LINE('',#28761,#28762); +#28761 = CARTESIAN_POINT('',(-4.75,-0.325,0.)); +#28762 = VECTOR('',#28763,1.); +#28763 = DIRECTION('',(1.,-1.224646799147E-16,0.)); +#28764 = PCURVE('',#28237,#28765); +#28765 = DEFINITIONAL_REPRESENTATION('',(#28766),#28770); +#28766 = LINE('',#28767,#28768); +#28767 = CARTESIAN_POINT('',(0.,0.)); +#28768 = VECTOR('',#28769,1.); +#28769 = DIRECTION('',(1.,0.)); +#28770 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28771 = PCURVE('',#28772,#28777); +#28772 = PLANE('',#28773); +#28773 = AXIS2_PLACEMENT_3D('',#28774,#28775,#28776); +#28774 = CARTESIAN_POINT('',(-3.000096934556,3.808225032462E-16,0.)); +#28775 = DIRECTION('',(0.,0.,1.)); +#28776 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#28777 = DEFINITIONAL_REPRESENTATION('',(#28778),#28782); +#28778 = LINE('',#28779,#28780); +#28779 = CARTESIAN_POINT('',(1.749903065444,0.325)); +#28780 = VECTOR('',#28781,1.); +#28781 = DIRECTION('',(-1.,0.)); +#28782 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28783 = ADVANCED_FACE('',(#28784),#28211,.T.); +#28784 = FACE_BOUND('',#28785,.T.); +#28785 = EDGE_LOOP('',(#28786,#28810,#28831,#28832)); +#28786 = ORIENTED_EDGE('',*,*,#28787,.T.); +#28787 = EDGE_CURVE('',#28736,#28788,#28790,.T.); +#28788 = VERTEX_POINT('',#28789); +#28789 = CARTESIAN_POINT('',(-1.425,0.325,0.)); +#28790 = SURFACE_CURVE('',#28791,(#28796,#28803),.PCURVE_S1.); +#28791 = CIRCLE('',#28792,0.325); +#28792 = AXIS2_PLACEMENT_3D('',#28793,#28794,#28795); +#28793 = CARTESIAN_POINT('',(-1.425,2.300233201098E-16,0.)); +#28794 = DIRECTION('',(-0.,0.,1.)); +#28795 = DIRECTION('',(1.243963658085E-15,-1.,0.)); +#28796 = PCURVE('',#28211,#28797); +#28797 = DEFINITIONAL_REPRESENTATION('',(#28798),#28802); +#28798 = LINE('',#28799,#28800); +#28799 = CARTESIAN_POINT('',(6.28318530718,0.)); +#28800 = VECTOR('',#28801,1.); +#28801 = DIRECTION('',(-1.,0.)); +#28802 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28803 = PCURVE('',#28772,#28804); +#28804 = DEFINITIONAL_REPRESENTATION('',(#28805),#28809); +#28805 = CIRCLE('',#28806,0.325); +#28806 = AXIS2_PLACEMENT_2D('',#28807,#28808); +#28807 = CARTESIAN_POINT('',(-1.575096934556,-4.209455878863E-17)); +#28808 = DIRECTION('',(-1.366428338E-15,1.)); +#28809 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28810 = ORIENTED_EDGE('',*,*,#28811,.T.); +#28811 = EDGE_CURVE('',#28788,#28167,#28812,.T.); +#28812 = SURFACE_CURVE('',#28813,(#28817,#28824),.PCURVE_S1.); +#28813 = LINE('',#28814,#28815); +#28814 = CARTESIAN_POINT('',(-1.425,0.325,0.)); +#28815 = VECTOR('',#28816,1.); +#28816 = DIRECTION('',(0.,0.,1.)); +#28817 = PCURVE('',#28211,#28818); +#28818 = DEFINITIONAL_REPRESENTATION('',(#28819),#28823); +#28819 = LINE('',#28820,#28821); +#28820 = CARTESIAN_POINT('',(3.14159265359,0.)); +#28821 = VECTOR('',#28822,1.); +#28822 = DIRECTION('',(0.,-1.)); +#28823 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28824 = PCURVE('',#28182,#28825); +#28825 = DEFINITIONAL_REPRESENTATION('',(#28826),#28830); +#28826 = LINE('',#28827,#28828); +#28827 = CARTESIAN_POINT('',(0.,0.)); +#28828 = VECTOR('',#28829,1.); +#28829 = DIRECTION('',(0.,-1.)); +#28830 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28831 = ORIENTED_EDGE('',*,*,#28194,.F.); +#28832 = ORIENTED_EDGE('',*,*,#28735,.F.); +#28833 = ADVANCED_FACE('',(#28834),#28182,.F.); +#28834 = FACE_BOUND('',#28835,.F.); +#28835 = EDGE_LOOP('',(#28836,#28837,#28838,#28839,#28862)); +#28836 = ORIENTED_EDGE('',*,*,#28811,.T.); +#28837 = ORIENTED_EDGE('',*,*,#28166,.T.); +#28838 = ORIENTED_EDGE('',*,*,#28302,.T.); +#28839 = ORIENTED_EDGE('',*,*,#28840,.F.); +#28840 = EDGE_CURVE('',#28841,#28303,#28843,.T.); +#28841 = VERTEX_POINT('',#28842); +#28842 = CARTESIAN_POINT('',(-4.75,0.325,0.)); +#28843 = SURFACE_CURVE('',#28844,(#28848,#28855),.PCURVE_S1.); +#28844 = LINE('',#28845,#28846); +#28845 = CARTESIAN_POINT('',(-4.75,0.325,0.)); +#28846 = VECTOR('',#28847,1.); +#28847 = DIRECTION('',(0.,0.,1.)); +#28848 = PCURVE('',#28182,#28849); +#28849 = DEFINITIONAL_REPRESENTATION('',(#28850),#28854); +#28850 = LINE('',#28851,#28852); +#28851 = CARTESIAN_POINT('',(3.325,0.)); +#28852 = VECTOR('',#28853,1.); +#28853 = DIRECTION('',(0.,-1.)); +#28854 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28855 = PCURVE('',#28341,#28856); +#28856 = DEFINITIONAL_REPRESENTATION('',(#28857),#28861); +#28857 = LINE('',#28858,#28859); +#28858 = CARTESIAN_POINT('',(0.,0.)); +#28859 = VECTOR('',#28860,1.); +#28860 = DIRECTION('',(0.,-1.)); +#28861 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28862 = ORIENTED_EDGE('',*,*,#28863,.F.); +#28863 = EDGE_CURVE('',#28788,#28841,#28864,.T.); +#28864 = SURFACE_CURVE('',#28865,(#28869,#28876),.PCURVE_S1.); +#28865 = LINE('',#28866,#28867); +#28866 = CARTESIAN_POINT('',(-1.425,0.325,0.)); +#28867 = VECTOR('',#28868,1.); +#28868 = DIRECTION('',(-1.,8.90745137606E-17,0.)); +#28869 = PCURVE('',#28182,#28870); +#28870 = DEFINITIONAL_REPRESENTATION('',(#28871),#28875); +#28871 = LINE('',#28872,#28873); +#28872 = CARTESIAN_POINT('',(0.,0.)); +#28873 = VECTOR('',#28874,1.); +#28874 = DIRECTION('',(1.,0.)); +#28875 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28876 = PCURVE('',#28772,#28877); +#28877 = DEFINITIONAL_REPRESENTATION('',(#28878),#28882); +#28878 = LINE('',#28879,#28880); +#28879 = CARTESIAN_POINT('',(-1.575096934556,-0.325)); +#28880 = VECTOR('',#28881,1.); +#28881 = DIRECTION('',(1.,3.33901661541E-17)); +#28882 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28883 = ADVANCED_FACE('',(#28884),#28104,.F.); +#28884 = FACE_BOUND('',#28885,.F.); +#28885 = EDGE_LOOP('',(#28886,#28909,#28910,#28911,#28934)); +#28886 = ORIENTED_EDGE('',*,*,#28887,.T.); +#28887 = EDGE_CURVE('',#28888,#28521,#28890,.T.); +#28888 = VERTEX_POINT('',#28889); +#28889 = CARTESIAN_POINT('',(4.75,0.325,0.)); +#28890 = SURFACE_CURVE('',#28891,(#28895,#28902),.PCURVE_S1.); +#28891 = LINE('',#28892,#28893); +#28892 = CARTESIAN_POINT('',(4.75,0.325,0.)); +#28893 = VECTOR('',#28894,1.); +#28894 = DIRECTION('',(0.,0.,1.)); +#28895 = PCURVE('',#28104,#28896); +#28896 = DEFINITIONAL_REPRESENTATION('',(#28897),#28901); +#28897 = LINE('',#28898,#28899); +#28898 = CARTESIAN_POINT('',(0.,0.)); +#28899 = VECTOR('',#28900,1.); +#28900 = DIRECTION('',(0.,-1.)); +#28901 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28902 = PCURVE('',#28536,#28903); +#28903 = DEFINITIONAL_REPRESENTATION('',(#28904),#28908); +#28904 = LINE('',#28905,#28906); +#28905 = CARTESIAN_POINT('',(0.65,0.)); +#28906 = VECTOR('',#28907,1.); +#28907 = DIRECTION('',(0.,-1.)); +#28908 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28909 = ORIENTED_EDGE('',*,*,#28548,.T.); +#28910 = ORIENTED_EDGE('',*,*,#28090,.T.); +#28911 = ORIENTED_EDGE('',*,*,#28912,.F.); +#28912 = EDGE_CURVE('',#28913,#28062,#28915,.T.); +#28913 = VERTEX_POINT('',#28914); +#28914 = CARTESIAN_POINT('',(1.425,0.325,0.)); +#28915 = SURFACE_CURVE('',#28916,(#28920,#28927),.PCURVE_S1.); +#28916 = LINE('',#28917,#28918); +#28917 = CARTESIAN_POINT('',(1.425,0.325,0.)); +#28918 = VECTOR('',#28919,1.); +#28919 = DIRECTION('',(0.,0.,1.)); +#28920 = PCURVE('',#28104,#28921); +#28921 = DEFINITIONAL_REPRESENTATION('',(#28922),#28926); +#28922 = LINE('',#28923,#28924); +#28923 = CARTESIAN_POINT('',(3.325,0.)); +#28924 = VECTOR('',#28925,1.); +#28925 = DIRECTION('',(0.,-1.)); +#28926 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28927 = PCURVE('',#28078,#28928); +#28928 = DEFINITIONAL_REPRESENTATION('',(#28929),#28933); +#28929 = LINE('',#28930,#28931); +#28930 = CARTESIAN_POINT('',(6.28318530718,0.)); +#28931 = VECTOR('',#28932,1.); +#28932 = DIRECTION('',(0.,-1.)); +#28933 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28934 = ORIENTED_EDGE('',*,*,#28935,.F.); +#28935 = EDGE_CURVE('',#28888,#28913,#28936,.T.); +#28936 = SURFACE_CURVE('',#28937,(#28941,#28948),.PCURVE_S1.); +#28937 = LINE('',#28938,#28939); +#28938 = CARTESIAN_POINT('',(4.75,0.325,0.)); +#28939 = VECTOR('',#28940,1.); +#28940 = DIRECTION('',(-1.,2.449293598295E-16,0.)); +#28941 = PCURVE('',#28104,#28942); +#28942 = DEFINITIONAL_REPRESENTATION('',(#28943),#28947); +#28943 = LINE('',#28944,#28945); +#28944 = CARTESIAN_POINT('',(0.,0.)); +#28945 = VECTOR('',#28946,1.); +#28946 = DIRECTION('',(1.,0.)); +#28947 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28948 = PCURVE('',#28949,#28954); +#28949 = PLANE('',#28950); +#28950 = AXIS2_PLACEMENT_3D('',#28951,#28952,#28953); +#28951 = CARTESIAN_POINT('',(3.000096934556,-7.482284140497E-16,0.)); +#28952 = DIRECTION('',(0.,0.,1.)); +#28953 = DIRECTION('',(1.,-2.449293598295E-16,0.)); +#28954 = DEFINITIONAL_REPRESENTATION('',(#28955),#28959); +#28955 = LINE('',#28956,#28957); +#28956 = CARTESIAN_POINT('',(1.749903065444,0.325)); +#28957 = VECTOR('',#28958,1.); +#28958 = DIRECTION('',(-1.,0.)); +#28959 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28960 = ADVANCED_FACE('',(#28961),#28078,.T.); +#28961 = FACE_BOUND('',#28962,.T.); +#28962 = EDGE_LOOP('',(#28963,#28987,#29008,#29009)); +#28963 = ORIENTED_EDGE('',*,*,#28964,.T.); +#28964 = EDGE_CURVE('',#28913,#28965,#28967,.T.); +#28965 = VERTEX_POINT('',#28966); +#28966 = CARTESIAN_POINT('',(1.425,-0.325,0.)); +#28967 = SURFACE_CURVE('',#28968,(#28973,#28980),.PCURVE_S1.); +#28968 = CIRCLE('',#28969,0.325); +#28969 = AXIS2_PLACEMENT_3D('',#28970,#28971,#28972); +#28970 = CARTESIAN_POINT('',(1.425,-4.045354889883E-16,0.)); +#28971 = DIRECTION('',(0.,0.,1.)); +#28972 = DIRECTION('',(-1.121498978171E-15,1.,0.)); +#28973 = PCURVE('',#28078,#28974); +#28974 = DEFINITIONAL_REPRESENTATION('',(#28975),#28979); +#28975 = LINE('',#28976,#28977); +#28976 = CARTESIAN_POINT('',(6.28318530718,0.)); +#28977 = VECTOR('',#28978,1.); +#28978 = DIRECTION('',(-1.,0.)); +#28979 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28980 = PCURVE('',#28949,#28981); +#28981 = DEFINITIONAL_REPRESENTATION('',(#28982),#28986); +#28982 = CIRCLE('',#28983,0.325); +#28983 = AXIS2_PLACEMENT_2D('',#28984,#28985); +#28984 = CARTESIAN_POINT('',(-1.575096934556,-4.209455878881E-17)); +#28985 = DIRECTION('',(-1.366428338E-15,1.)); +#28986 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#28987 = ORIENTED_EDGE('',*,*,#28988,.T.); +#28988 = EDGE_CURVE('',#28965,#28034,#28989,.T.); +#28989 = SURFACE_CURVE('',#28990,(#28994,#29001),.PCURVE_S1.); +#28990 = LINE('',#28991,#28992); +#28991 = CARTESIAN_POINT('',(1.425,-0.325,0.)); +#28992 = VECTOR('',#28993,1.); +#28993 = DIRECTION('',(0.,0.,1.)); +#28994 = PCURVE('',#28078,#28995); +#28995 = DEFINITIONAL_REPRESENTATION('',(#28996),#29000); +#28996 = LINE('',#28997,#28998); +#28997 = CARTESIAN_POINT('',(3.14159265359,0.)); +#28998 = VECTOR('',#28999,1.); +#28999 = DIRECTION('',(0.,-1.)); +#29000 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#29001 = PCURVE('',#28049,#29002); +#29002 = DEFINITIONAL_REPRESENTATION('',(#29003),#29007); +#29003 = LINE('',#29004,#29005); +#29004 = CARTESIAN_POINT('',(0.,0.)); +#29005 = VECTOR('',#29006,1.); +#29006 = DIRECTION('',(0.,-1.)); +#29007 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#29008 = ORIENTED_EDGE('',*,*,#28061,.F.); +#29009 = ORIENTED_EDGE('',*,*,#28912,.F.); +#29010 = ADVANCED_FACE('',(#29011),#28049,.F.); +#29011 = FACE_BOUND('',#29012,.F.); +#29012 = EDGE_LOOP('',(#29013,#29014,#29015,#29016,#29039)); +#29013 = ORIENTED_EDGE('',*,*,#28988,.T.); +#29014 = ORIENTED_EDGE('',*,*,#28033,.T.); +#29015 = ORIENTED_EDGE('',*,*,#28497,.T.); +#29016 = ORIENTED_EDGE('',*,*,#29017,.F.); +#29017 = EDGE_CURVE('',#29018,#28498,#29020,.T.); +#29018 = VERTEX_POINT('',#29019); +#29019 = CARTESIAN_POINT('',(4.75,-0.325,0.)); +#29020 = SURFACE_CURVE('',#29021,(#29025,#29032),.PCURVE_S1.); +#29021 = LINE('',#29022,#29023); +#29022 = CARTESIAN_POINT('',(4.75,-0.325,0.)); +#29023 = VECTOR('',#29024,1.); +#29024 = DIRECTION('',(0.,0.,1.)); +#29025 = PCURVE('',#28049,#29026); +#29026 = DEFINITIONAL_REPRESENTATION('',(#29027),#29031); +#29027 = LINE('',#29028,#29029); +#29028 = CARTESIAN_POINT('',(3.325,0.)); +#29029 = VECTOR('',#29030,1.); +#29030 = DIRECTION('',(0.,-1.)); +#29031 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#29032 = PCURVE('',#28536,#29033); +#29033 = DEFINITIONAL_REPRESENTATION('',(#29034),#29038); +#29034 = LINE('',#29035,#29036); +#29035 = CARTESIAN_POINT('',(0.,0.)); +#29036 = VECTOR('',#29037,1.); +#29037 = DIRECTION('',(0.,-1.)); +#29038 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#29039 = ORIENTED_EDGE('',*,*,#29040,.F.); +#29040 = EDGE_CURVE('',#28965,#29018,#29041,.T.); +#29041 = SURFACE_CURVE('',#29042,(#29046,#29053),.PCURVE_S1.); +#29042 = LINE('',#29043,#29044); +#29043 = CARTESIAN_POINT('',(1.425,-0.325,0.)); +#29044 = VECTOR('',#29045,1.); +#29045 = DIRECTION('',(1.,-2.115391936753E-16,0.)); +#29046 = PCURVE('',#28049,#29047); +#29047 = DEFINITIONAL_REPRESENTATION('',(#29048),#29052); +#29048 = LINE('',#29049,#29050); +#29049 = CARTESIAN_POINT('',(0.,0.)); +#29050 = VECTOR('',#29051,1.); +#29051 = DIRECTION('',(1.,0.)); +#29052 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#29053 = PCURVE('',#28949,#29054); +#29054 = DEFINITIONAL_REPRESENTATION('',(#29055),#29059); +#29055 = LINE('',#29056,#29057); +#29056 = CARTESIAN_POINT('',(-1.575096934556,-0.325)); +#29057 = VECTOR('',#29058,1.); +#29058 = DIRECTION('',(1.,3.33901661542E-17)); +#29059 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#29060 = ADVANCED_FACE('',(#29061),#28341,.F.); +#29061 = FACE_BOUND('',#29062,.F.); +#29062 = EDGE_LOOP('',(#29063,#29064,#29065,#29066)); +#29063 = ORIENTED_EDGE('',*,*,#28840,.T.); +#29064 = ORIENTED_EDGE('',*,*,#28325,.T.); +#29065 = ORIENTED_EDGE('',*,*,#28710,.F.); +#29066 = ORIENTED_EDGE('',*,*,#29067,.F.); +#29067 = EDGE_CURVE('',#28841,#28711,#29068,.T.); +#29068 = SURFACE_CURVE('',#29069,(#29073,#29080),.PCURVE_S1.); +#29069 = LINE('',#29070,#29071); +#29070 = CARTESIAN_POINT('',(-4.75,0.325,0.)); +#29071 = VECTOR('',#29072,1.); +#29072 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#29073 = PCURVE('',#28341,#29074); +#29074 = DEFINITIONAL_REPRESENTATION('',(#29075),#29079); +#29075 = LINE('',#29076,#29077); +#29076 = CARTESIAN_POINT('',(0.,0.)); +#29077 = VECTOR('',#29078,1.); +#29078 = DIRECTION('',(1.,0.)); +#29079 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#29080 = PCURVE('',#28772,#29081); +#29081 = DEFINITIONAL_REPRESENTATION('',(#29082),#29086); +#29082 = LINE('',#29083,#29084); +#29083 = CARTESIAN_POINT('',(1.749903065444,-0.325)); +#29084 = VECTOR('',#29085,1.); +#29085 = DIRECTION('',(0.,1.)); +#29086 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#29087 = ADVANCED_FACE('',(#29088),#28536,.F.); +#29088 = FACE_BOUND('',#29089,.F.); +#29089 = EDGE_LOOP('',(#29090,#29091,#29092,#29093)); +#29090 = ORIENTED_EDGE('',*,*,#29017,.T.); +#29091 = ORIENTED_EDGE('',*,*,#28520,.T.); +#29092 = ORIENTED_EDGE('',*,*,#28887,.F.); +#29093 = ORIENTED_EDGE('',*,*,#29094,.F.); +#29094 = EDGE_CURVE('',#29018,#28888,#29095,.T.); +#29095 = SURFACE_CURVE('',#29096,(#29100,#29107),.PCURVE_S1.); +#29096 = LINE('',#29097,#29098); +#29097 = CARTESIAN_POINT('',(4.75,-0.325,0.)); +#29098 = VECTOR('',#29099,1.); +#29099 = DIRECTION('',(2.449293598295E-16,1.,0.)); +#29100 = PCURVE('',#28536,#29101); +#29101 = DEFINITIONAL_REPRESENTATION('',(#29102),#29106); +#29102 = LINE('',#29103,#29104); +#29103 = CARTESIAN_POINT('',(0.,0.)); +#29104 = VECTOR('',#29105,1.); +#29105 = DIRECTION('',(1.,0.)); +#29106 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#29107 = PCURVE('',#28949,#29108); +#29108 = DEFINITIONAL_REPRESENTATION('',(#29109),#29113); +#29109 = LINE('',#29110,#29111); +#29110 = CARTESIAN_POINT('',(1.749903065444,-0.325)); +#29111 = VECTOR('',#29112,1.); +#29112 = DIRECTION('',(0.,1.)); +#29113 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#29114 = ADVANCED_FACE('',(#29115),#28614,.T.); +#29115 = FACE_BOUND('',#29116,.T.); +#29116 = EDGE_LOOP('',(#29117,#29148,#29227,#29228)); +#29117 = ORIENTED_EDGE('',*,*,#29118,.T.); +#29118 = EDGE_CURVE('',#29119,#29121,#29123,.T.); +#29119 = VERTEX_POINT('',#29120); +#29120 = CARTESIAN_POINT('',(-3.466666666667,4.245442237044E-16,10.5)); +#29121 = VERTEX_POINT('',#29122); +#29122 = CARTESIAN_POINT('',(1.2,3.25234957804,10.5)); +#29123 = SURFACE_CURVE('',#29124,(#29129,#29136),.PCURVE_S1.); +#29124 = CIRCLE('',#29125,3.466666666667); +#29125 = AXIS2_PLACEMENT_3D('',#29126,#29127,#29128); +#29126 = CARTESIAN_POINT('',(0.,0.,10.5)); +#29127 = DIRECTION('',(0.,0.,-1.)); +#29128 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#29129 = PCURVE('',#28614,#29130); +#29130 = DEFINITIONAL_REPRESENTATION('',(#29131),#29135); +#29131 = LINE('',#29132,#29133); +#29132 = CARTESIAN_POINT('',(6.28318530718,1.570796326795)); +#29133 = VECTOR('',#29134,1.); +#29134 = DIRECTION('',(-1.,0.)); +#29135 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#29136 = PCURVE('',#29137,#29142); +#29137 = PLANE('',#29138); +#29138 = AXIS2_PLACEMENT_3D('',#29139,#29140,#29141); +#29139 = CARTESIAN_POINT('',(0.,0.,10.5)); +#29140 = DIRECTION('',(-0.,0.,-1.)); +#29141 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#29142 = DEFINITIONAL_REPRESENTATION('',(#29143),#29147); +#29143 = CIRCLE('',#29144,3.466666666667); +#29144 = AXIS2_PLACEMENT_2D('',#29145,#29146); +#29145 = CARTESIAN_POINT('',(0.,0.)); +#29146 = DIRECTION('',(1.,0.)); +#29147 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#29148 = ORIENTED_EDGE('',*,*,#29149,.F.); +#29149 = EDGE_CURVE('',#28598,#29121,#29150,.T.); +#29150 = SURFACE_CURVE('',#29151,(#29169,#29198),.PCURVE_S1.); +#29151 = B_SPLINE_CURVE_WITH_KNOTS('',6,(#29152,#29153,#29154,#29155, + #29156,#29157,#29158,#29159,#29160,#29161,#29162,#29163,#29164, + #29165,#29166,#29167,#29168),.UNSPECIFIED.,.F.,.F.,(7,5,5,7),(0., + 0.297890205936,0.596186610785,1.),.UNSPECIFIED.); +#29152 = CARTESIAN_POINT('',(1.2,3.815756805668,9.966666666667)); +#29153 = CARTESIAN_POINT('',(1.2,3.815756801262,10.008696495753)); +#29154 = CARTESIAN_POINT('',(1.2,3.811590213401,10.05072831062)); +#29155 = CARTESIAN_POINT('',(1.2,3.803256501026,10.092270940133)); +#29156 = CARTESIAN_POINT('',(1.2,3.790843032593,10.132840928873)); +#29157 = CARTESIAN_POINT('',(1.2,3.774517833109,10.17197923621)); +#29158 = CARTESIAN_POINT('',(1.2,3.734499563645,10.246607480905)); +#29159 = CARTESIAN_POINT('',(1.2,3.710794784471,10.282095435341)); +#29160 = CARTESIAN_POINT('',(1.2,3.68364943293,10.315312213315)); +#29161 = CARTESIAN_POINT('',(1.2,3.653371267561,10.345890583241)); +#29162 = CARTESIAN_POINT('',(1.2,3.620319306473,10.373521824448)); +#29163 = CARTESIAN_POINT('',(1.2,3.536925313459,10.431047175461)); +#29164 = CARTESIAN_POINT('',(1.2,3.484598693754,10.458287259873)); +#29165 = CARTESIAN_POINT('',(1.2,3.428888029485,10.479074916341)); +#29166 = CARTESIAN_POINT('',(1.2,3.37087149716,10.493034515606)); +#29167 = CARTESIAN_POINT('',(1.2,3.311655602221,10.499999994454)); +#29168 = CARTESIAN_POINT('',(1.2,3.25234957804,10.5)); +#29169 = PCURVE('',#28614,#29170); +#29170 = DEFINITIONAL_REPRESENTATION('',(#29171),#29197); +#29171 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#29172,#29173,#29174,#29175, + #29176,#29177,#29178,#29179,#29180,#29181,#29182,#29183,#29184, + #29185,#29186,#29187,#29188,#29189,#29190,#29191,#29192,#29193, + #29194,#29195,#29196),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1 + ,1,1,1,1,1,1,1,1,1,1,4),(0.,4.545454545455E-02,9.090909090909E-02, + 0.136363636364,0.181818181818,0.227272727273,0.272727272727, + 0.318181818182,0.363636363636,0.409090909091,0.454545454545,0.5, + 0.545454545455,0.590909090909,0.636363636364,0.681818181818, + 0.727272727273,0.772727272727,0.818181818182,0.863636363636, + 0.909090909091,0.954545454545,1.),.QUASI_UNIFORM_KNOTS.); +#29172 = CARTESIAN_POINT('',(4.407696326369,0.)); +#29173 = CARTESIAN_POINT('',(4.407696355677,2.40498756527E-02)); +#29174 = CARTESIAN_POINT('',(4.407623543688,7.21498738306E-02)); +#29175 = CARTESIAN_POINT('',(4.407296269424,0.144286981975)); +#29176 = CARTESIAN_POINT('',(4.406751357958,0.216396990434)); +#29177 = CARTESIAN_POINT('',(4.405989705938,0.288467721527)); +#29178 = CARTESIAN_POINT('',(4.405012532113,0.360487434972)); +#29179 = CARTESIAN_POINT('',(4.403821439126,0.432444857778)); +#29180 = CARTESIAN_POINT('',(4.402418470652,0.50432738875)); +#29181 = CARTESIAN_POINT('',(4.400806004624,0.576128077271)); +#29182 = CARTESIAN_POINT('',(4.398986937662,0.647837395303)); +#29183 = CARTESIAN_POINT('',(4.396964617051,0.719448713985)); +#29184 = CARTESIAN_POINT('',(4.394742901753,0.79095701256)); +#29185 = CARTESIAN_POINT('',(4.392326216145,0.862358663878)); +#29186 = CARTESIAN_POINT('',(4.389719640027,0.933650495624)); +#29187 = CARTESIAN_POINT('',(4.386928910941,1.004831615957)); +#29188 = CARTESIAN_POINT('',(4.383960435095,1.075904369806)); +#29189 = CARTESIAN_POINT('',(4.380821521415,1.146870325083)); +#29190 = CARTESIAN_POINT('',(4.377520295133,1.217734296722)); +#29191 = CARTESIAN_POINT('',(4.374065836413,1.288502772663)); +#29192 = CARTESIAN_POINT('',(4.370468251566,1.359183913226)); +#29193 = CARTESIAN_POINT('',(4.366738824167,1.429787228023)); +#29194 = CARTESIAN_POINT('',(4.362889935971,1.500323275925)); +#29195 = CARTESIAN_POINT('',(4.360253873048,1.547310229742)); +#29196 = CARTESIAN_POINT('',(4.358920593807,1.570796326796)); +#29197 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#29198 = PCURVE('',#28643,#29199); +#29199 = DEFINITIONAL_REPRESENTATION('',(#29200),#29226); +#29200 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#29201,#29202,#29203,#29204, + #29205,#29206,#29207,#29208,#29209,#29210,#29211,#29212,#29213, + #29214,#29215,#29216,#29217,#29218,#29219,#29220,#29221,#29222, + #29223,#29224,#29225),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1 + ,1,1,1,1,1,1,1,1,1,1,4),(0.,4.545454545455E-02,9.090909090909E-02, + 0.136363636364,0.181818181818,0.227272727273,0.272727272727, + 0.318181818182,0.363636363636,0.409090909091,0.454545454545,0.5, + 0.545454545455,0.590909090909,0.636363636364,0.681818181818, + 0.727272727273,0.772727272727,0.818181818182,0.863636363636, + 0.909090909091,0.954545454545,1.),.QUASI_UNIFORM_KNOTS.); +#29201 = CARTESIAN_POINT('',(4.407696326369,0.)); +#29202 = CARTESIAN_POINT('',(4.407696355677,2.40498756527E-02)); +#29203 = CARTESIAN_POINT('',(4.407623543688,7.21498738306E-02)); +#29204 = CARTESIAN_POINT('',(4.407296269424,0.144286981975)); +#29205 = CARTESIAN_POINT('',(4.406751357958,0.216396990434)); +#29206 = CARTESIAN_POINT('',(4.405989705938,0.288467721527)); +#29207 = CARTESIAN_POINT('',(4.405012532113,0.360487434972)); +#29208 = CARTESIAN_POINT('',(4.403821439126,0.432444857778)); +#29209 = CARTESIAN_POINT('',(4.402418470652,0.50432738875)); +#29210 = CARTESIAN_POINT('',(4.400806004624,0.576128077271)); +#29211 = CARTESIAN_POINT('',(4.398986937662,0.647837395303)); +#29212 = CARTESIAN_POINT('',(4.396964617051,0.719448713985)); +#29213 = CARTESIAN_POINT('',(4.394742901753,0.79095701256)); +#29214 = CARTESIAN_POINT('',(4.392326216145,0.862358663878)); +#29215 = CARTESIAN_POINT('',(4.389719640027,0.933650495624)); +#29216 = CARTESIAN_POINT('',(4.386928910941,1.004831615957)); +#29217 = CARTESIAN_POINT('',(4.383960435095,1.075904369806)); +#29218 = CARTESIAN_POINT('',(4.380821521415,1.146870325083)); +#29219 = CARTESIAN_POINT('',(4.377520295133,1.217734296722)); +#29220 = CARTESIAN_POINT('',(4.374065836413,1.288502772663)); +#29221 = CARTESIAN_POINT('',(4.370468251566,1.359183913226)); +#29222 = CARTESIAN_POINT('',(4.366738824167,1.429787228023)); +#29223 = CARTESIAN_POINT('',(4.362889935971,1.500323275925)); +#29224 = CARTESIAN_POINT('',(4.360253873048,1.547310229742)); +#29225 = CARTESIAN_POINT('',(4.358920593807,1.570796326796)); +#29226 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#29227 = ORIENTED_EDGE('',*,*,#28597,.F.); +#29228 = ORIENTED_EDGE('',*,*,#29229,.T.); +#29229 = EDGE_CURVE('',#28575,#29119,#29230,.T.); +#29230 = SURFACE_CURVE('',#29231,(#29236,#29243),.PCURVE_S1.); +#29231 = CIRCLE('',#29232,0.533333333333); +#29232 = AXIS2_PLACEMENT_3D('',#29233,#29234,#29235); +#29233 = CARTESIAN_POINT('',(-3.466666666667,4.245442237044E-16, + 9.966666666667)); +#29234 = DIRECTION('',(1.224646799147E-16,1.,-0.)); +#29235 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#29236 = PCURVE('',#28614,#29237); +#29237 = DEFINITIONAL_REPRESENTATION('',(#29238),#29242); +#29238 = LINE('',#29239,#29240); +#29239 = CARTESIAN_POINT('',(6.28318530718,0.)); +#29240 = VECTOR('',#29241,1.); +#29241 = DIRECTION('',(0.,1.)); +#29242 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#29243 = PCURVE('',#28694,#29244); +#29244 = DEFINITIONAL_REPRESENTATION('',(#29245),#29249); +#29245 = LINE('',#29246,#29247); +#29246 = CARTESIAN_POINT('',(0.,0.)); +#29247 = VECTOR('',#29248,1.); +#29248 = DIRECTION('',(0.,1.)); +#29249 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#29250 = ADVANCED_FACE('',(#29251),#28643,.T.); +#29251 = FACE_BOUND('',#29252,.T.); +#29252 = EDGE_LOOP('',(#29253,#29286,#29365,#29366,#29367)); +#29253 = ORIENTED_EDGE('',*,*,#29254,.T.); +#29254 = EDGE_CURVE('',#29121,#29255,#29257,.T.); +#29255 = VERTEX_POINT('',#29256); +#29256 = CARTESIAN_POINT('',(1.2,-3.25234957804,10.5)); +#29257 = SURFACE_CURVE('',#29258,(#29263,#29270),.PCURVE_S1.); +#29258 = CIRCLE('',#29259,3.466666666667); +#29259 = AXIS2_PLACEMENT_3D('',#29260,#29261,#29262); +#29260 = CARTESIAN_POINT('',(0.,0.,10.5)); +#29261 = DIRECTION('',(0.,0.,-1.)); +#29262 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#29263 = PCURVE('',#28643,#29264); +#29264 = DEFINITIONAL_REPRESENTATION('',(#29265),#29269); +#29265 = LINE('',#29266,#29267); +#29266 = CARTESIAN_POINT('',(6.28318530718,1.570796326795)); +#29267 = VECTOR('',#29268,1.); +#29268 = DIRECTION('',(-1.,0.)); +#29269 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#29270 = PCURVE('',#29271,#29276); +#29271 = PLANE('',#29272); +#29272 = AXIS2_PLACEMENT_3D('',#29273,#29274,#29275); +#29273 = CARTESIAN_POINT('',(4.,4.,10.5)); +#29274 = DIRECTION('',(0.,0.,1.)); +#29275 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#29276 = DEFINITIONAL_REPRESENTATION('',(#29277),#29285); +#29277 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#29278,#29279,#29280,#29281 + ,#29282,#29283,#29284),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#29278 = CARTESIAN_POINT('',(7.466666666667,4.)); +#29279 = CARTESIAN_POINT('',(7.466666666667,-2.004442799573)); +#29280 = CARTESIAN_POINT('',(2.266666666667,0.997778600214)); +#29281 = CARTESIAN_POINT('',(-2.933333333334,4.)); +#29282 = CARTESIAN_POINT('',(2.266666666666,7.002221399786)); +#29283 = CARTESIAN_POINT('',(7.466666666667,10.004442799573)); +#29284 = CARTESIAN_POINT('',(7.466666666667,4.)); +#29285 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#29286 = ORIENTED_EDGE('',*,*,#29287,.F.); +#29287 = EDGE_CURVE('',#28656,#29255,#29288,.T.); +#29288 = SURFACE_CURVE('',#29289,(#29307,#29336),.PCURVE_S1.); +#29289 = B_SPLINE_CURVE_WITH_KNOTS('',6,(#29290,#29291,#29292,#29293, + #29294,#29295,#29296,#29297,#29298,#29299,#29300,#29301,#29302, + #29303,#29304,#29305,#29306),.UNSPECIFIED.,.F.,.F.,(7,5,5,7),(0., + 0.297890205938,0.596186610786,1.),.UNSPECIFIED.); +#29290 = CARTESIAN_POINT('',(1.2,-3.815756805668,9.966666666667)); +#29291 = CARTESIAN_POINT('',(1.2,-3.815756801262,10.008696495753)); +#29292 = CARTESIAN_POINT('',(1.2,-3.811590213401,10.05072831062)); +#29293 = CARTESIAN_POINT('',(1.2,-3.803256501026,10.092270940134)); +#29294 = CARTESIAN_POINT('',(1.2,-3.790843032593,10.132840928873)); +#29295 = CARTESIAN_POINT('',(1.2,-3.774517833109,10.171979236211)); +#29296 = CARTESIAN_POINT('',(1.2,-3.734499563644,10.246607480907)); +#29297 = CARTESIAN_POINT('',(1.2,-3.71079478447,10.282095435342)); +#29298 = CARTESIAN_POINT('',(1.2,-3.683649432929,10.315312213316)); +#29299 = CARTESIAN_POINT('',(1.2,-3.65337126756,10.345890583242)); +#29300 = CARTESIAN_POINT('',(1.2,-3.620319306472,10.373521824448)); +#29301 = CARTESIAN_POINT('',(1.2,-3.536925313457,10.431047175461)); +#29302 = CARTESIAN_POINT('',(1.2,-3.484598693753,10.458287259873)); +#29303 = CARTESIAN_POINT('',(1.2,-3.428888029485,10.479074916341)); +#29304 = CARTESIAN_POINT('',(1.2,-3.370871497159,10.493034515606)); +#29305 = CARTESIAN_POINT('',(1.2,-3.311655602221,10.499999994454)); +#29306 = CARTESIAN_POINT('',(1.2,-3.25234957804,10.5)); +#29307 = PCURVE('',#28643,#29308); +#29308 = DEFINITIONAL_REPRESENTATION('',(#29309),#29335); +#29309 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#29310,#29311,#29312,#29313, + #29314,#29315,#29316,#29317,#29318,#29319,#29320,#29321,#29322, + #29323,#29324,#29325,#29326,#29327,#29328,#29329,#29330,#29331, + #29332,#29333,#29334),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1 + ,1,1,1,1,1,1,1,1,1,1,4),(0.,4.545454545455E-02,9.090909090909E-02, + 0.136363636364,0.181818181818,0.227272727273,0.272727272727, + 0.318181818182,0.363636363636,0.409090909091,0.454545454545,0.5, + 0.545454545455,0.590909090909,0.636363636364,0.681818181818, + 0.727272727273,0.772727272727,0.818181818182,0.863636363636, + 0.909090909091,0.954545454545,1.),.QUASI_UNIFORM_KNOTS.); +#29310 = CARTESIAN_POINT('',(1.87548898081,0.)); +#29311 = CARTESIAN_POINT('',(1.875488951503,2.404987565251E-02)); +#29312 = CARTESIAN_POINT('',(1.875561763492,7.214987383016E-02)); +#29313 = CARTESIAN_POINT('',(1.875889037756,0.144286981975)); +#29314 = CARTESIAN_POINT('',(1.876433949222,0.216396990433)); +#29315 = CARTESIAN_POINT('',(1.877195601242,0.288467721526)); +#29316 = CARTESIAN_POINT('',(1.878172775066,0.360487434971)); +#29317 = CARTESIAN_POINT('',(1.879363868053,0.432444857778)); +#29318 = CARTESIAN_POINT('',(1.880766836527,0.50432738875)); +#29319 = CARTESIAN_POINT('',(1.882379302556,0.576128077272)); +#29320 = CARTESIAN_POINT('',(1.884198369517,0.647837395303)); +#29321 = CARTESIAN_POINT('',(1.886220690129,0.719448713985)); +#29322 = CARTESIAN_POINT('',(1.888442405426,0.79095701256)); +#29323 = CARTESIAN_POINT('',(1.890859091035,0.862358663878)); +#29324 = CARTESIAN_POINT('',(1.893465667153,0.933650495624)); +#29325 = CARTESIAN_POINT('',(1.896256396238,1.004831615958)); +#29326 = CARTESIAN_POINT('',(1.899224872085,1.075904369807)); +#29327 = CARTESIAN_POINT('',(1.902363785765,1.146870325083)); +#29328 = CARTESIAN_POINT('',(1.905665012047,1.217734296722)); +#29329 = CARTESIAN_POINT('',(1.909119470767,1.288502772664)); +#29330 = CARTESIAN_POINT('',(1.912717055614,1.359183913226)); +#29331 = CARTESIAN_POINT('',(1.916446483013,1.429787228024)); +#29332 = CARTESIAN_POINT('',(1.920295371209,1.500323275925)); +#29333 = CARTESIAN_POINT('',(1.922931434131,1.547310229742)); +#29334 = CARTESIAN_POINT('',(1.924264713372,1.570796326796)); +#29335 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#29336 = PCURVE('',#28694,#29337); +#29337 = DEFINITIONAL_REPRESENTATION('',(#29338),#29364); +#29338 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#29339,#29340,#29341,#29342, + #29343,#29344,#29345,#29346,#29347,#29348,#29349,#29350,#29351, + #29352,#29353,#29354,#29355,#29356,#29357,#29358,#29359,#29360, + #29361,#29362,#29363),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1 + ,1,1,1,1,1,1,1,1,1,1,4),(0.,4.545454545455E-02,9.090909090909E-02, + 0.136363636364,0.181818181818,0.227272727273,0.272727272727, + 0.318181818182,0.363636363636,0.409090909091,0.454545454545,0.5, + 0.545454545455,0.590909090909,0.636363636364,0.681818181818, + 0.727272727273,0.772727272727,0.818181818182,0.863636363636, + 0.909090909091,0.954545454545,1.),.QUASI_UNIFORM_KNOTS.); +#29339 = CARTESIAN_POINT('',(1.87548898081,0.)); +#29340 = CARTESIAN_POINT('',(1.875488951503,2.404987565251E-02)); +#29341 = CARTESIAN_POINT('',(1.875561763492,7.214987383016E-02)); +#29342 = CARTESIAN_POINT('',(1.875889037756,0.144286981975)); +#29343 = CARTESIAN_POINT('',(1.876433949222,0.216396990433)); +#29344 = CARTESIAN_POINT('',(1.877195601242,0.288467721526)); +#29345 = CARTESIAN_POINT('',(1.878172775066,0.360487434971)); +#29346 = CARTESIAN_POINT('',(1.879363868053,0.432444857778)); +#29347 = CARTESIAN_POINT('',(1.880766836527,0.50432738875)); +#29348 = CARTESIAN_POINT('',(1.882379302556,0.576128077272)); +#29349 = CARTESIAN_POINT('',(1.884198369517,0.647837395303)); +#29350 = CARTESIAN_POINT('',(1.886220690129,0.719448713985)); +#29351 = CARTESIAN_POINT('',(1.888442405426,0.79095701256)); +#29352 = CARTESIAN_POINT('',(1.890859091035,0.862358663878)); +#29353 = CARTESIAN_POINT('',(1.893465667153,0.933650495624)); +#29354 = CARTESIAN_POINT('',(1.896256396238,1.004831615958)); +#29355 = CARTESIAN_POINT('',(1.899224872085,1.075904369807)); +#29356 = CARTESIAN_POINT('',(1.902363785765,1.146870325083)); +#29357 = CARTESIAN_POINT('',(1.905665012047,1.217734296722)); +#29358 = CARTESIAN_POINT('',(1.909119470767,1.288502772664)); +#29359 = CARTESIAN_POINT('',(1.912717055614,1.359183913226)); +#29360 = CARTESIAN_POINT('',(1.916446483013,1.429787228024)); +#29361 = CARTESIAN_POINT('',(1.920295371209,1.500323275925)); +#29362 = CARTESIAN_POINT('',(1.922931434131,1.547310229742)); +#29363 = CARTESIAN_POINT('',(1.924264713372,1.570796326796)); +#29364 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#29365 = ORIENTED_EDGE('',*,*,#28655,.F.); +#29366 = ORIENTED_EDGE('',*,*,#28626,.F.); +#29367 = ORIENTED_EDGE('',*,*,#29149,.T.); +#29368 = ADVANCED_FACE('',(#29369),#28694,.T.); +#29369 = FACE_BOUND('',#29370,.T.); +#29370 = EDGE_LOOP('',(#29371,#29372,#29394,#29395)); +#29371 = ORIENTED_EDGE('',*,*,#29287,.T.); +#29372 = ORIENTED_EDGE('',*,*,#29373,.T.); +#29373 = EDGE_CURVE('',#29255,#29119,#29374,.T.); +#29374 = SURFACE_CURVE('',#29375,(#29380,#29387),.PCURVE_S1.); +#29375 = CIRCLE('',#29376,3.466666666667); +#29376 = AXIS2_PLACEMENT_3D('',#29377,#29378,#29379); +#29377 = CARTESIAN_POINT('',(0.,0.,10.5)); +#29378 = DIRECTION('',(0.,0.,-1.)); +#29379 = DIRECTION('',(-1.,1.224646799147E-16,0.)); +#29380 = PCURVE('',#28694,#29381); +#29381 = DEFINITIONAL_REPRESENTATION('',(#29382),#29386); +#29382 = LINE('',#29383,#29384); +#29383 = CARTESIAN_POINT('',(6.28318530718,1.570796326795)); +#29384 = VECTOR('',#29385,1.); +#29385 = DIRECTION('',(-1.,0.)); +#29386 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#29387 = PCURVE('',#29137,#29388); +#29388 = DEFINITIONAL_REPRESENTATION('',(#29389),#29393); +#29389 = CIRCLE('',#29390,3.466666666667); +#29390 = AXIS2_PLACEMENT_2D('',#29391,#29392); +#29391 = CARTESIAN_POINT('',(0.,0.)); +#29392 = DIRECTION('',(1.,0.)); +#29393 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#29394 = ORIENTED_EDGE('',*,*,#29229,.F.); +#29395 = ORIENTED_EDGE('',*,*,#28679,.F.); +#29396 = ADVANCED_FACE('',(#29397),#28772,.F.); +#29397 = FACE_BOUND('',#29398,.F.); +#29398 = EDGE_LOOP('',(#29399,#29400,#29401,#29402)); +#29399 = ORIENTED_EDGE('',*,*,#29067,.T.); +#29400 = ORIENTED_EDGE('',*,*,#28758,.T.); +#29401 = ORIENTED_EDGE('',*,*,#28787,.T.); +#29402 = ORIENTED_EDGE('',*,*,#28863,.T.); +#29403 = ADVANCED_FACE('',(#29404),#28949,.F.); +#29404 = FACE_BOUND('',#29405,.F.); +#29405 = EDGE_LOOP('',(#29406,#29407,#29408,#29409)); +#29406 = ORIENTED_EDGE('',*,*,#29094,.T.); +#29407 = ORIENTED_EDGE('',*,*,#28935,.T.); +#29408 = ORIENTED_EDGE('',*,*,#28964,.T.); +#29409 = ORIENTED_EDGE('',*,*,#29040,.T.); +#29410 = ADVANCED_FACE('',(#29411),#29137,.F.); +#29411 = FACE_BOUND('',#29412,.F.); +#29412 = EDGE_LOOP('',(#29413,#29414,#29415)); +#29413 = ORIENTED_EDGE('',*,*,#29373,.T.); +#29414 = ORIENTED_EDGE('',*,*,#29118,.T.); +#29415 = ORIENTED_EDGE('',*,*,#29416,.T.); +#29416 = EDGE_CURVE('',#29121,#29255,#29417,.T.); +#29417 = SURFACE_CURVE('',#29418,(#29422,#29429),.PCURVE_S1.); +#29418 = LINE('',#29419,#29420); +#29419 = CARTESIAN_POINT('',(1.2,4.,10.5)); +#29420 = VECTOR('',#29421,1.); +#29421 = DIRECTION('',(-1.224646799147E-16,-1.,0.)); +#29422 = PCURVE('',#29137,#29423); +#29423 = DEFINITIONAL_REPRESENTATION('',(#29424),#29428); +#29424 = LINE('',#29425,#29426); +#29425 = CARTESIAN_POINT('',(-1.2,4.)); +#29426 = VECTOR('',#29427,1.); +#29427 = DIRECTION('',(0.,-1.)); +#29428 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#29429 = PCURVE('',#29271,#29430); +#29430 = DEFINITIONAL_REPRESENTATION('',(#29431),#29435); +#29431 = LINE('',#29432,#29433); +#29432 = CARTESIAN_POINT('',(2.8,3.429011037612E-16)); +#29433 = VECTOR('',#29434,1.); +#29434 = DIRECTION('',(0.,1.)); +#29435 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#29436 = ADVANCED_FACE('',(#29437),#29271,.T.); +#29437 = FACE_BOUND('',#29438,.T.); +#29438 = EDGE_LOOP('',(#29439,#29440)); +#29439 = ORIENTED_EDGE('',*,*,#29254,.F.); +#29440 = ORIENTED_EDGE('',*,*,#29416,.T.); +#29441 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#29445)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#29442,#29443,#29444)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#29442 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#29443 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#29444 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#29445 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-02),#29442, + 'distance_accuracy_value','confusion accuracy'); +#29446 = SHAPE_DEFINITION_REPRESENTATION(#29447,#26324); +#29447 = PRODUCT_DEFINITION_SHAPE('','',#29448); +#29448 = PRODUCT_DEFINITION('design','',#29449,#29452); +#29449 = PRODUCT_DEFINITION_FORMATION('','',#29450); +#29450 = PRODUCT('SOLID','SOLID','',(#29451)); +#29451 = PRODUCT_CONTEXT('',#2,'mechanical'); +#29452 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#29453 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#29454,#29456); +#29454 = ( REPRESENTATION_RELATIONSHIP('','',#26324,#26314) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#29455) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#29455 = ITEM_DEFINED_TRANSFORMATION('','',#11,#26315); +#29456 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #29457); +#29457 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('15','=>[0:1:1:13]','',#26309, + #29448,$); +#29458 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#29450)); +#29459 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#29460,#29462); +#29460 = ( REPRESENTATION_RELATIONSHIP('','',#26314,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#29461) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#29461 = ITEM_DEFINED_TRANSFORMATION('','',#11,#51); +#29462 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #29463); +#29463 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('16','','',#5,#26309,$); +#29464 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#26311)); +#29465 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#29466,#29468); +#29466 = ( REPRESENTATION_RELATIONSHIP('','',#20230,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#29467) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#29467 = ITEM_DEFINED_TRANSFORMATION('','',#11,#55); +#29468 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #29469); +#29469 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('17','','',#5,#20225,$); +#29470 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#29471,#29473); +#29471 = ( REPRESENTATION_RELATIONSHIP('','',#20230,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#29472) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#29472 = ITEM_DEFINED_TRANSFORMATION('','',#11,#59); +#29473 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #29474); +#29474 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('18','','',#5,#20225,$); +#29475 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#29476,#29478); +#29476 = ( REPRESENTATION_RELATIONSHIP('','',#240,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#29477) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#29477 = ITEM_DEFINED_TRANSFORMATION('','',#11,#63); +#29478 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #29479); +#29479 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('19','','',#5,#235,$); +#29480 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#29481,#29483); +#29481 = ( REPRESENTATION_RELATIONSHIP('','',#240,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#29482) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#29482 = ITEM_DEFINED_TRANSFORMATION('','',#11,#67); +#29483 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #29484); +#29484 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('20','','',#5,#235,$); +#29485 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#29486,#29488); +#29486 = ( REPRESENTATION_RELATIONSHIP('','',#240,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#29487) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#29487 = ITEM_DEFINED_TRANSFORMATION('','',#11,#71); +#29488 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #29489); +#29489 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('21','','',#5,#235,$); +#29490 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#29491,#29493); +#29491 = ( REPRESENTATION_RELATIONSHIP('','',#22124,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#29492) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#29492 = ITEM_DEFINED_TRANSFORMATION('','',#11,#75); +#29493 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #29494); +#29494 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('22','','',#5,#22119,$); +#29495 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#29496,#29498); +#29496 = ( REPRESENTATION_RELATIONSHIP('','',#20230,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#29497) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#29497 = ITEM_DEFINED_TRANSFORMATION('','',#11,#79); +#29498 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #29499); +#29499 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('23','','',#5,#20225,$); +#29500 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#29501,#29503); +#29501 = ( REPRESENTATION_RELATIONSHIP('','',#20230,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#29502) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#29502 = ITEM_DEFINED_TRANSFORMATION('','',#11,#83); +#29503 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #29504); +#29504 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('24','','',#5,#20225,$); +#29505 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#29506,#29508); +#29506 = ( REPRESENTATION_RELATIONSHIP('','',#20230,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#29507) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#29507 = ITEM_DEFINED_TRANSFORMATION('','',#11,#87); +#29508 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #29509); +#29509 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('25','','',#5,#20225,$); +#29510 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#29511,#29513); +#29511 = ( REPRESENTATION_RELATIONSHIP('','',#20230,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#29512) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#29512 = ITEM_DEFINED_TRANSFORMATION('','',#11,#91); +#29513 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #29514); +#29514 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('26','','',#5,#20225,$); +#29515 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#29516,#29518); +#29516 = ( REPRESENTATION_RELATIONSHIP('','',#20230,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#29517) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#29517 = ITEM_DEFINED_TRANSFORMATION('','',#11,#95); +#29518 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #29519); +#29519 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('27','','',#5,#20225,$); +#29520 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#29521,#29523); +#29521 = ( REPRESENTATION_RELATIONSHIP('','',#20230,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#29522) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#29522 = ITEM_DEFINED_TRANSFORMATION('','',#11,#99); +#29523 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #29524); +#29524 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('28','','',#5,#20225,$); +#29525 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#29526,#29528); +#29526 = ( REPRESENTATION_RELATIONSHIP('','',#20230,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#29527) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#29527 = ITEM_DEFINED_TRANSFORMATION('','',#11,#103); +#29528 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #29529); +#29529 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('29','','',#5,#20225,$); +#29530 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#29531,#29533); +#29531 = ( REPRESENTATION_RELATIONSHIP('','',#240,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#29532) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#29532 = ITEM_DEFINED_TRANSFORMATION('','',#11,#107); +#29533 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #29534); +#29534 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('30','','',#5,#235,$); +#29535 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#29536,#29538); +#29536 = ( REPRESENTATION_RELATIONSHIP('','',#20230,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#29537) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#29537 = ITEM_DEFINED_TRANSFORMATION('','',#11,#111); +#29538 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #29539); +#29539 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('31','','',#5,#20225,$); +#29540 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#29541,#29543); +#29541 = ( REPRESENTATION_RELATIONSHIP('','',#26314,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#29542) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#29542 = ITEM_DEFINED_TRANSFORMATION('','',#11,#115); +#29543 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #29544); +#29544 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('32','','',#5,#26309,$); +#29545 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#29546,#29548); +#29546 = ( REPRESENTATION_RELATIONSHIP('','',#240,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#29547) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#29547 = ITEM_DEFINED_TRANSFORMATION('','',#11,#119); +#29548 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #29549); +#29549 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('33','','',#5,#235,$); +#29550 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#29551,#29553); +#29551 = ( REPRESENTATION_RELATIONSHIP('','',#240,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#29552) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#29552 = ITEM_DEFINED_TRANSFORMATION('','',#11,#123); +#29553 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #29554); +#29554 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('34','','',#5,#235,$); +#29555 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#29556,#29558); +#29556 = ( REPRESENTATION_RELATIONSHIP('','',#26314,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#29557) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#29557 = ITEM_DEFINED_TRANSFORMATION('','',#11,#127); +#29558 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #29559); +#29559 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('35','','',#5,#26309,$); +#29560 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#29561,#29563); +#29561 = ( REPRESENTATION_RELATIONSHIP('','',#20230,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#29562) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#29562 = ITEM_DEFINED_TRANSFORMATION('','',#11,#131); +#29563 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #29564); +#29564 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('36','','',#5,#20225,$); +#29565 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#29566,#29568); +#29566 = ( REPRESENTATION_RELATIONSHIP('','',#20230,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#29567) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#29567 = ITEM_DEFINED_TRANSFORMATION('','',#11,#135); +#29568 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #29569); +#29569 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('37','','',#5,#20225,$); +#29570 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#29571,#29573); +#29571 = ( REPRESENTATION_RELATIONSHIP('','',#22124,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#29572) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#29572 = ITEM_DEFINED_TRANSFORMATION('','',#11,#139); +#29573 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #29574); +#29574 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('38','','',#5,#22119,$); +#29575 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#29576,#29578); +#29576 = ( REPRESENTATION_RELATIONSHIP('','',#240,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#29577) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#29577 = ITEM_DEFINED_TRANSFORMATION('','',#11,#143); +#29578 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #29579); +#29579 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('39','','',#5,#235,$); +#29580 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#29581,#29583); +#29581 = ( REPRESENTATION_RELATIONSHIP('','',#22124,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#29582) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#29582 = ITEM_DEFINED_TRANSFORMATION('','',#11,#147); +#29583 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #29584); +#29584 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('40','','',#5,#22119,$); +#29585 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#29586,#29588); +#29586 = ( REPRESENTATION_RELATIONSHIP('','',#20230,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#29587) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#29587 = ITEM_DEFINED_TRANSFORMATION('','',#11,#151); +#29588 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #29589); +#29589 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('41','','',#5,#20225,$); +#29590 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#29591,#29593); +#29591 = ( REPRESENTATION_RELATIONSHIP('','',#20230,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#29592) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#29592 = ITEM_DEFINED_TRANSFORMATION('','',#11,#155); +#29593 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #29594); +#29594 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('42','','',#5,#20225,$); +#29595 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#29596,#29598); +#29596 = ( REPRESENTATION_RELATIONSHIP('','',#20230,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#29597) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#29597 = ITEM_DEFINED_TRANSFORMATION('','',#11,#159); +#29598 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #29599); +#29599 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('43','','',#5,#20225,$); +#29600 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#29601,#29603); +#29601 = ( REPRESENTATION_RELATIONSHIP('','',#22124,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#29602) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#29602 = ITEM_DEFINED_TRANSFORMATION('','',#11,#163); +#29603 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #29604); +#29604 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('44','','',#5,#22119,$); +#29605 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#29606,#29608); +#29606 = ( REPRESENTATION_RELATIONSHIP('','',#240,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#29607) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#29607 = ITEM_DEFINED_TRANSFORMATION('','',#11,#167); +#29608 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #29609); +#29609 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('45','','',#5,#235,$); +#29610 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#29611,#29613); +#29611 = ( REPRESENTATION_RELATIONSHIP('','',#20230,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#29612) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#29612 = ITEM_DEFINED_TRANSFORMATION('','',#11,#171); +#29613 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #29614); +#29614 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('46','','',#5,#20225,$); +#29615 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#29616,#29618); +#29616 = ( REPRESENTATION_RELATIONSHIP('','',#20230,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#29617) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#29617 = ITEM_DEFINED_TRANSFORMATION('','',#11,#175); +#29618 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #29619); +#29619 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('47','','',#5,#20225,$); +#29620 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#29621,#29623); +#29621 = ( REPRESENTATION_RELATIONSHIP('','',#22124,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#29622) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#29622 = ITEM_DEFINED_TRANSFORMATION('','',#11,#179); +#29623 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #29624); +#29624 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('48','','',#5,#22119,$); +#29625 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#29626,#29628); +#29626 = ( REPRESENTATION_RELATIONSHIP('','',#20230,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#29627) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#29627 = ITEM_DEFINED_TRANSFORMATION('','',#11,#183); +#29628 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #29629); +#29629 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('49','','',#5,#20225,$); +#29630 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#29631,#29633); +#29631 = ( REPRESENTATION_RELATIONSHIP('','',#240,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#29632) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#29632 = ITEM_DEFINED_TRANSFORMATION('','',#11,#187); +#29633 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #29634); +#29634 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('50','','',#5,#235,$); +#29635 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#29636,#29638); +#29636 = ( REPRESENTATION_RELATIONSHIP('','',#20230,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#29637) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#29637 = ITEM_DEFINED_TRANSFORMATION('','',#11,#191); +#29638 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #29639); +#29639 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('51','','',#5,#20225,$); +#29640 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#29641,#29643); +#29641 = ( REPRESENTATION_RELATIONSHIP('','',#240,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#29642) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#29642 = ITEM_DEFINED_TRANSFORMATION('','',#11,#195); +#29643 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #29644); +#29644 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('52','','',#5,#235,$); +#29645 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#29646,#29648); +#29646 = ( REPRESENTATION_RELATIONSHIP('','',#22124,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#29647) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#29647 = ITEM_DEFINED_TRANSFORMATION('','',#11,#199); +#29648 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #29649); +#29649 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('53','','',#5,#22119,$); +#29650 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#29651,#29653); +#29651 = ( REPRESENTATION_RELATIONSHIP('','',#240,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#29652) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#29652 = ITEM_DEFINED_TRANSFORMATION('','',#11,#203); +#29653 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #29654); +#29654 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('54','','',#5,#235,$); +#29655 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#29656,#29658); +#29656 = ( REPRESENTATION_RELATIONSHIP('','',#26314,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#29657) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#29657 = ITEM_DEFINED_TRANSFORMATION('','',#11,#207); +#29658 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #29659); +#29659 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('55','','',#5,#26309,$); +#29660 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#29661,#29663); +#29661 = ( REPRESENTATION_RELATIONSHIP('','',#26314,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#29662) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#29662 = ITEM_DEFINED_TRANSFORMATION('','',#11,#211); +#29663 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #29664); +#29664 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('56','','',#5,#26309,$); +#29665 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#29666,#29668); +#29666 = ( REPRESENTATION_RELATIONSHIP('','',#20230,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#29667) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#29667 = ITEM_DEFINED_TRANSFORMATION('','',#11,#215); +#29668 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #29669); +#29669 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('57','','',#5,#20225,$); +#29670 = SHAPE_DEFINITION_REPRESENTATION(#29671,#29677); +#29671 = PRODUCT_DEFINITION_SHAPE('','',#29672); +#29672 = PRODUCT_DEFINITION('design','',#29673,#29676); +#29673 = PRODUCT_DEFINITION_FORMATION('','',#29674); +#29674 = PRODUCT('SOIC-8_3.9x4.9mm_P1.27mm','SOIC-8_3.9x4.9mm_P1.27mm', + '',(#29675)); +#29675 = PRODUCT_CONTEXT('',#2,'mechanical'); +#29676 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#29677 = SHAPE_REPRESENTATION('',(#11,#29678),#29682); +#29678 = AXIS2_PLACEMENT_3D('',#29679,#29680,#29681); +#29679 = CARTESIAN_POINT('',(0.,0.,0.)); +#29680 = DIRECTION('',(0.,0.,1.)); +#29681 = DIRECTION('',(1.,0.,-0.)); +#29682 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#29686)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#29683,#29684,#29685)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#29683 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#29684 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#29685 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#29686 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-02),#29683, + 'distance_accuracy_value','confusion accuracy'); +#29687 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#29688),#40592); +#29688 = MANIFOLD_SOLID_BREP('',#29689); +#29689 = CLOSED_SHELL('',(#29690,#29820,#29896,#29972,#30230,#30453, + #30750,#30777,#30833,#30980,#31007,#31034,#31061,#31088,#31115, + #31122,#31176,#31357,#31405,#31458,#31536,#31617,#31698,#31779, + #31860,#31936,#31992,#32039,#32295,#32321,#32606,#32654,#32707, + #32760,#33037,#33069,#33120,#33405,#33473,#33718,#33745,#34030, + #34098,#34152,#34370,#34615,#34642,#34687,#34739,#34785,#34837, + #35027,#35074,#35103,#35132,#35161,#35188,#35215,#35242,#35269, + #35296,#35323,#35350,#35357,#35408,#35459,#35518,#35596,#35677, + #35758,#35839,#35920,#36001,#36082,#36158,#36190,#36216,#36243, + #36270,#36297,#36324,#36351,#36378,#36405,#36412,#36439,#36466, + #36493,#36520,#36547,#36574,#36601,#36608,#36655,#36681,#36728, + #36975,#37022,#37048,#37103,#37129,#37155,#37204,#37489,#37774, + #37842,#37896,#38114,#38359,#38386,#38454,#38739,#39024,#39092, + #39146,#39364,#39609,#39636,#39681,#39688,#39717,#39746,#39775, + #39804,#39808,#39835,#39862,#39889,#39916,#39943,#39970,#39997, + #40004,#40031,#40058,#40085,#40112,#40139,#40166,#40193,#40200, + #40227,#40254,#40281,#40308,#40335,#40362,#40389,#40396,#40423, + #40450,#40477,#40504,#40531,#40558,#40585)); +#29690 = ADVANCED_FACE('',(#29691),#29705,.F.); +#29691 = FACE_BOUND('',#29692,.F.); +#29692 = EDGE_LOOP('',(#29693,#29728,#29761,#29789)); +#29693 = ORIENTED_EDGE('',*,*,#29694,.T.); +#29694 = EDGE_CURVE('',#29695,#29697,#29699,.T.); +#29695 = VERTEX_POINT('',#29696); +#29696 = CARTESIAN_POINT('',(2.25,2.11,0.825)); +#29697 = VERTEX_POINT('',#29698); +#29698 = CARTESIAN_POINT('',(2.25,1.7,0.825)); +#29699 = SURFACE_CURVE('',#29700,(#29704,#29716),.PCURVE_S1.); +#29700 = LINE('',#29701,#29702); +#29701 = CARTESIAN_POINT('',(2.25,2.11,0.825)); +#29702 = VECTOR('',#29703,1.); +#29703 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#29704 = PCURVE('',#29705,#29710); +#29705 = CYLINDRICAL_SURFACE('',#29706,0.1); +#29706 = AXIS2_PLACEMENT_3D('',#29707,#29708,#29709); +#29707 = CARTESIAN_POINT('',(2.25,2.11,0.725)); +#29708 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#29709 = DIRECTION('',(4.440892098501E-15,9.860761315262E-31,1.)); +#29710 = DEFINITIONAL_REPRESENTATION('',(#29711),#29715); +#29711 = LINE('',#29712,#29713); +#29712 = CARTESIAN_POINT('',(0.,0.)); +#29713 = VECTOR('',#29714,1.); +#29714 = DIRECTION('',(0.,-1.)); +#29715 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#29716 = PCURVE('',#29717,#29722); +#29717 = PLANE('',#29718); +#29718 = AXIS2_PLACEMENT_3D('',#29719,#29720,#29721); +#29719 = CARTESIAN_POINT('',(1.8,2.11,0.825)); +#29720 = DIRECTION('',(0.,0.,1.)); +#29721 = DIRECTION('',(1.,2.22044604925E-16,-0.)); +#29722 = DEFINITIONAL_REPRESENTATION('',(#29723),#29727); +#29723 = LINE('',#29724,#29725); +#29724 = CARTESIAN_POINT('',(0.45,-9.992007221625E-17)); +#29725 = VECTOR('',#29726,1.); +#29726 = DIRECTION('',(0.,-1.)); +#29727 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#29728 = ORIENTED_EDGE('',*,*,#29729,.T.); +#29729 = EDGE_CURVE('',#29697,#29730,#29732,.T.); +#29730 = VERTEX_POINT('',#29731); +#29731 = CARTESIAN_POINT('',(2.35,1.7,0.725)); +#29732 = SURFACE_CURVE('',#29733,(#29738,#29745),.PCURVE_S1.); +#29733 = CIRCLE('',#29734,0.1); +#29734 = AXIS2_PLACEMENT_3D('',#29735,#29736,#29737); +#29735 = CARTESIAN_POINT('',(2.25,1.7,0.725)); +#29736 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#29737 = DIRECTION('',(4.440892098501E-15,9.860761315262E-31,1.)); +#29738 = PCURVE('',#29705,#29739); +#29739 = DEFINITIONAL_REPRESENTATION('',(#29740),#29744); +#29740 = LINE('',#29741,#29742); +#29741 = CARTESIAN_POINT('',(0.,-0.41)); +#29742 = VECTOR('',#29743,1.); +#29743 = DIRECTION('',(1.,0.)); +#29744 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#29745 = PCURVE('',#29746,#29751); +#29746 = PLANE('',#29747); +#29747 = AXIS2_PLACEMENT_3D('',#29748,#29749,#29750); +#29748 = CARTESIAN_POINT('',(2.41578967201,1.7,0.532659657565)); +#29749 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#29750 = DIRECTION('',(0.,0.,1.)); +#29751 = DEFINITIONAL_REPRESENTATION('',(#29752),#29760); +#29752 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#29753,#29754,#29755,#29756 + ,#29757,#29758,#29759),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#29753 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#29754 = CARTESIAN_POINT('',(0.292340342435,-7.415408746888E-03)); +#29755 = CARTESIAN_POINT('',(0.142340342435,7.918713163156E-02)); +#29756 = CARTESIAN_POINT('',(-7.659657565E-03,0.16578967201)); +#29757 = CARTESIAN_POINT('',(0.142340342435,0.252392212388)); +#29758 = CARTESIAN_POINT('',(0.292340342435,0.338994752767)); +#29759 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#29760 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#29761 = ORIENTED_EDGE('',*,*,#29762,.F.); +#29762 = EDGE_CURVE('',#29763,#29730,#29765,.T.); +#29763 = VERTEX_POINT('',#29764); +#29764 = CARTESIAN_POINT('',(2.35,2.11,0.725)); +#29765 = SURFACE_CURVE('',#29766,(#29770,#29777),.PCURVE_S1.); +#29766 = LINE('',#29767,#29768); +#29767 = CARTESIAN_POINT('',(2.35,2.11,0.725)); +#29768 = VECTOR('',#29769,1.); +#29769 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#29770 = PCURVE('',#29705,#29771); +#29771 = DEFINITIONAL_REPRESENTATION('',(#29772),#29776); +#29772 = LINE('',#29773,#29774); +#29773 = CARTESIAN_POINT('',(1.570796326795,0.)); +#29774 = VECTOR('',#29775,1.); +#29775 = DIRECTION('',(0.,-1.)); +#29776 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#29777 = PCURVE('',#29778,#29783); +#29778 = PLANE('',#29779); +#29779 = AXIS2_PLACEMENT_3D('',#29780,#29781,#29782); +#29780 = CARTESIAN_POINT('',(2.35,2.11,0.725)); +#29781 = DIRECTION('',(1.,2.22044604925E-16,1.044915787883E-15)); +#29782 = DIRECTION('',(1.044915787883E-15,2.320179133003E-31,-1.)); +#29783 = DEFINITIONAL_REPRESENTATION('',(#29784),#29788); +#29784 = LINE('',#29785,#29786); +#29785 = CARTESIAN_POINT('',(0.,0.)); +#29786 = VECTOR('',#29787,1.); +#29787 = DIRECTION('',(7.584527938158E-44,-1.)); +#29788 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#29789 = ORIENTED_EDGE('',*,*,#29790,.F.); +#29790 = EDGE_CURVE('',#29695,#29763,#29791,.T.); +#29791 = SURFACE_CURVE('',#29792,(#29797,#29804),.PCURVE_S1.); +#29792 = CIRCLE('',#29793,0.1); +#29793 = AXIS2_PLACEMENT_3D('',#29794,#29795,#29796); +#29794 = CARTESIAN_POINT('',(2.25,2.11,0.725)); +#29795 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#29796 = DIRECTION('',(4.440892098501E-15,9.860761315262E-31,1.)); +#29797 = PCURVE('',#29705,#29798); +#29798 = DEFINITIONAL_REPRESENTATION('',(#29799),#29803); +#29799 = LINE('',#29800,#29801); +#29800 = CARTESIAN_POINT('',(0.,0.)); +#29801 = VECTOR('',#29802,1.); +#29802 = DIRECTION('',(1.,0.)); +#29803 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#29804 = PCURVE('',#29805,#29810); +#29805 = PLANE('',#29806); +#29806 = AXIS2_PLACEMENT_3D('',#29807,#29808,#29809); +#29807 = CARTESIAN_POINT('',(2.41578967201,2.11,0.532659657565)); +#29808 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#29809 = DIRECTION('',(0.,0.,1.)); +#29810 = DEFINITIONAL_REPRESENTATION('',(#29811),#29819); +#29811 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#29812,#29813,#29814,#29815 + ,#29816,#29817,#29818),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#29812 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#29813 = CARTESIAN_POINT('',(0.292340342435,-7.415408746888E-03)); +#29814 = CARTESIAN_POINT('',(0.142340342435,7.918713163156E-02)); +#29815 = CARTESIAN_POINT('',(-7.659657565E-03,0.16578967201)); +#29816 = CARTESIAN_POINT('',(0.142340342435,0.252392212388)); +#29817 = CARTESIAN_POINT('',(0.292340342435,0.338994752767)); +#29818 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#29819 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#29820 = ADVANCED_FACE('',(#29821),#29717,.F.); +#29821 = FACE_BOUND('',#29822,.F.); +#29822 = EDGE_LOOP('',(#29823,#29846,#29874,#29895)); +#29823 = ORIENTED_EDGE('',*,*,#29824,.F.); +#29824 = EDGE_CURVE('',#29825,#29695,#29827,.T.); +#29825 = VERTEX_POINT('',#29826); +#29826 = CARTESIAN_POINT('',(1.95,2.11,0.825)); +#29827 = SURFACE_CURVE('',#29828,(#29832,#29839),.PCURVE_S1.); +#29828 = LINE('',#29829,#29830); +#29829 = CARTESIAN_POINT('',(1.8,2.11,0.825)); +#29830 = VECTOR('',#29831,1.); +#29831 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#29832 = PCURVE('',#29717,#29833); +#29833 = DEFINITIONAL_REPRESENTATION('',(#29834),#29838); +#29834 = LINE('',#29835,#29836); +#29835 = CARTESIAN_POINT('',(0.,0.)); +#29836 = VECTOR('',#29837,1.); +#29837 = DIRECTION('',(1.,0.)); +#29838 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#29839 = PCURVE('',#29805,#29840); +#29840 = DEFINITIONAL_REPRESENTATION('',(#29841),#29845); +#29841 = LINE('',#29842,#29843); +#29842 = CARTESIAN_POINT('',(0.292340342435,0.61578967201)); +#29843 = VECTOR('',#29844,1.); +#29844 = DIRECTION('',(0.,-1.)); +#29845 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#29846 = ORIENTED_EDGE('',*,*,#29847,.T.); +#29847 = EDGE_CURVE('',#29825,#29848,#29850,.T.); +#29848 = VERTEX_POINT('',#29849); +#29849 = CARTESIAN_POINT('',(1.95,1.7,0.825)); +#29850 = SURFACE_CURVE('',#29851,(#29855,#29862),.PCURVE_S1.); +#29851 = LINE('',#29852,#29853); +#29852 = CARTESIAN_POINT('',(1.95,2.275,0.825)); +#29853 = VECTOR('',#29854,1.); +#29854 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#29855 = PCURVE('',#29717,#29856); +#29856 = DEFINITIONAL_REPRESENTATION('',(#29857),#29861); +#29857 = LINE('',#29858,#29859); +#29858 = CARTESIAN_POINT('',(0.15,0.165)); +#29859 = VECTOR('',#29860,1.); +#29860 = DIRECTION('',(0.,-1.)); +#29861 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#29862 = PCURVE('',#29863,#29868); +#29863 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#29864,#29865) + ,(#29866,#29867 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.55),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#29864 = CARTESIAN_POINT('',(1.835171280765,2.217585640382,0.1)); +#29865 = CARTESIAN_POINT('',(1.95,2.275,0.825)); +#29866 = CARTESIAN_POINT('',(1.835171280765,-2.217585640382,0.1)); +#29867 = CARTESIAN_POINT('',(1.95,-2.275,0.825)); +#29868 = DEFINITIONAL_REPRESENTATION('',(#29869),#29873); +#29869 = LINE('',#29870,#29871); +#29870 = CARTESIAN_POINT('',(1.665334536938E-16,1.)); +#29871 = VECTOR('',#29872,1.); +#29872 = DIRECTION('',(1.,2.707861035671E-16)); +#29873 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#29874 = ORIENTED_EDGE('',*,*,#29875,.T.); +#29875 = EDGE_CURVE('',#29848,#29697,#29876,.T.); +#29876 = SURFACE_CURVE('',#29877,(#29881,#29888),.PCURVE_S1.); +#29877 = LINE('',#29878,#29879); +#29878 = CARTESIAN_POINT('',(1.8,1.7,0.825)); +#29879 = VECTOR('',#29880,1.); +#29880 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#29881 = PCURVE('',#29717,#29882); +#29882 = DEFINITIONAL_REPRESENTATION('',(#29883),#29887); +#29883 = LINE('',#29884,#29885); +#29884 = CARTESIAN_POINT('',(-9.103828801925E-17,-0.41)); +#29885 = VECTOR('',#29886,1.); +#29886 = DIRECTION('',(1.,0.)); +#29887 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#29888 = PCURVE('',#29746,#29889); +#29889 = DEFINITIONAL_REPRESENTATION('',(#29890),#29894); +#29890 = LINE('',#29891,#29892); +#29891 = CARTESIAN_POINT('',(0.292340342435,0.61578967201)); +#29892 = VECTOR('',#29893,1.); +#29893 = DIRECTION('',(0.,-1.)); +#29894 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#29895 = ORIENTED_EDGE('',*,*,#29694,.F.); +#29896 = ADVANCED_FACE('',(#29897),#29778,.F.); +#29897 = FACE_BOUND('',#29898,.F.); +#29898 = EDGE_LOOP('',(#29899,#29900,#29923,#29951)); +#29899 = ORIENTED_EDGE('',*,*,#29762,.T.); +#29900 = ORIENTED_EDGE('',*,*,#29901,.T.); +#29901 = EDGE_CURVE('',#29730,#29902,#29904,.T.); +#29902 = VERTEX_POINT('',#29903); +#29903 = CARTESIAN_POINT('',(2.35,1.7,0.3)); +#29904 = SURFACE_CURVE('',#29905,(#29909,#29916),.PCURVE_S1.); +#29905 = LINE('',#29906,#29907); +#29906 = CARTESIAN_POINT('',(2.35,1.7,0.725)); +#29907 = VECTOR('',#29908,1.); +#29908 = DIRECTION('',(1.044915787883E-15,2.320179133003E-31,-1.)); +#29909 = PCURVE('',#29778,#29910); +#29910 = DEFINITIONAL_REPRESENTATION('',(#29911),#29915); +#29911 = LINE('',#29912,#29913); +#29912 = CARTESIAN_POINT('',(-9.512734445312E-32,-0.41)); +#29913 = VECTOR('',#29914,1.); +#29914 = DIRECTION('',(1.,0.)); +#29915 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#29916 = PCURVE('',#29746,#29917); +#29917 = DEFINITIONAL_REPRESENTATION('',(#29918),#29922); +#29918 = LINE('',#29919,#29920); +#29919 = CARTESIAN_POINT('',(0.192340342435,6.578967201E-02)); +#29920 = VECTOR('',#29921,1.); +#29921 = DIRECTION('',(-1.,-1.044915787883E-15)); +#29922 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#29923 = ORIENTED_EDGE('',*,*,#29924,.F.); +#29924 = EDGE_CURVE('',#29925,#29902,#29927,.T.); +#29925 = VERTEX_POINT('',#29926); +#29926 = CARTESIAN_POINT('',(2.35,2.11,0.3)); +#29927 = SURFACE_CURVE('',#29928,(#29932,#29939),.PCURVE_S1.); +#29928 = LINE('',#29929,#29930); +#29929 = CARTESIAN_POINT('',(2.35,2.11,0.3)); +#29930 = VECTOR('',#29931,1.); +#29931 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#29932 = PCURVE('',#29778,#29933); +#29933 = DEFINITIONAL_REPRESENTATION('',(#29934),#29938); +#29934 = LINE('',#29935,#29936); +#29935 = CARTESIAN_POINT('',(0.425,-9.860761315258E-32)); +#29936 = VECTOR('',#29937,1.); +#29937 = DIRECTION('',(7.584527938158E-44,-1.)); +#29938 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#29939 = PCURVE('',#29940,#29945); +#29940 = CYLINDRICAL_SURFACE('',#29941,0.3); +#29941 = AXIS2_PLACEMENT_3D('',#29942,#29943,#29944); +#29942 = CARTESIAN_POINT('',(2.65,2.11,0.3)); +#29943 = DIRECTION('',(-2.22044604925E-16,1.,-0.)); +#29944 = DIRECTION('',(-1.,-2.22044604925E-16,3.515706244646E-15)); +#29945 = DEFINITIONAL_REPRESENTATION('',(#29946),#29950); +#29946 = LINE('',#29947,#29948); +#29947 = CARTESIAN_POINT('',(6.28318530718,0.)); +#29948 = VECTOR('',#29949,1.); +#29949 = DIRECTION('',(0.,-1.)); +#29950 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#29951 = ORIENTED_EDGE('',*,*,#29952,.F.); +#29952 = EDGE_CURVE('',#29763,#29925,#29953,.T.); +#29953 = SURFACE_CURVE('',#29954,(#29958,#29965),.PCURVE_S1.); +#29954 = LINE('',#29955,#29956); +#29955 = CARTESIAN_POINT('',(2.35,2.11,0.725)); +#29956 = VECTOR('',#29957,1.); +#29957 = DIRECTION('',(1.044915787883E-15,2.320179133003E-31,-1.)); +#29958 = PCURVE('',#29778,#29959); +#29959 = DEFINITIONAL_REPRESENTATION('',(#29960),#29964); +#29960 = LINE('',#29961,#29962); +#29961 = CARTESIAN_POINT('',(0.,0.)); +#29962 = VECTOR('',#29963,1.); +#29963 = DIRECTION('',(1.,0.)); +#29964 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#29965 = PCURVE('',#29805,#29966); +#29966 = DEFINITIONAL_REPRESENTATION('',(#29967),#29971); +#29967 = LINE('',#29968,#29969); +#29968 = CARTESIAN_POINT('',(0.192340342435,6.578967201E-02)); +#29969 = VECTOR('',#29970,1.); +#29970 = DIRECTION('',(-1.,-1.044915787883E-15)); +#29971 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#29972 = ADVANCED_FACE('',(#29973),#29805,.F.); +#29973 = FACE_BOUND('',#29974,.F.); +#29974 = EDGE_LOOP('',(#29975,#30003,#30004,#30005,#30006,#30030,#30058, + #30086,#30114,#30147,#30175,#30204)); +#29975 = ORIENTED_EDGE('',*,*,#29976,.F.); +#29976 = EDGE_CURVE('',#29825,#29977,#29979,.T.); +#29977 = VERTEX_POINT('',#29978); +#29978 = CARTESIAN_POINT('',(1.95,2.11,1.025)); +#29979 = SURFACE_CURVE('',#29980,(#29984,#29991),.PCURVE_S1.); +#29980 = LINE('',#29981,#29982); +#29981 = CARTESIAN_POINT('',(1.95,2.11,0.778829828783)); +#29982 = VECTOR('',#29983,1.); +#29983 = DIRECTION('',(0.,0.,1.)); +#29984 = PCURVE('',#29805,#29985); +#29985 = DEFINITIONAL_REPRESENTATION('',(#29986),#29990); +#29986 = LINE('',#29987,#29988); +#29987 = CARTESIAN_POINT('',(0.246170171218,0.46578967201)); +#29988 = VECTOR('',#29989,1.); +#29989 = DIRECTION('',(1.,0.)); +#29990 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#29991 = PCURVE('',#29992,#29997); +#29992 = PLANE('',#29993); +#29993 = AXIS2_PLACEMENT_3D('',#29994,#29995,#29996); +#29994 = CARTESIAN_POINT('',(1.95,2.275,1.025)); +#29995 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#29996 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#29997 = DEFINITIONAL_REPRESENTATION('',(#29998),#30002); +#29998 = LINE('',#29999,#30000); +#29999 = CARTESIAN_POINT('',(0.165,-0.246170171217)); +#30000 = VECTOR('',#30001,1.); +#30001 = DIRECTION('',(0.,1.)); +#30002 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30003 = ORIENTED_EDGE('',*,*,#29824,.T.); +#30004 = ORIENTED_EDGE('',*,*,#29790,.T.); +#30005 = ORIENTED_EDGE('',*,*,#29952,.T.); +#30006 = ORIENTED_EDGE('',*,*,#30007,.T.); +#30007 = EDGE_CURVE('',#29925,#30008,#30010,.T.); +#30008 = VERTEX_POINT('',#30009); +#30009 = CARTESIAN_POINT('',(2.65,2.11,5.551115123126E-17)); +#30010 = SURFACE_CURVE('',#30011,(#30016,#30023),.PCURVE_S1.); +#30011 = CIRCLE('',#30012,0.3); +#30012 = AXIS2_PLACEMENT_3D('',#30013,#30014,#30015); +#30013 = CARTESIAN_POINT('',(2.65,2.11,0.3)); +#30014 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#30015 = DIRECTION('',(-1.,-2.22044604925E-16,3.515706244646E-15)); +#30016 = PCURVE('',#29805,#30017); +#30017 = DEFINITIONAL_REPRESENTATION('',(#30018),#30022); +#30018 = CIRCLE('',#30019,0.3); +#30019 = AXIS2_PLACEMENT_2D('',#30020,#30021); +#30020 = CARTESIAN_POINT('',(-0.232659657565,-0.23421032799)); +#30021 = DIRECTION('',(3.515706244646E-15,1.)); +#30022 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30023 = PCURVE('',#29940,#30024); +#30024 = DEFINITIONAL_REPRESENTATION('',(#30025),#30029); +#30025 = LINE('',#30026,#30027); +#30026 = CARTESIAN_POINT('',(6.28318530718,0.)); +#30027 = VECTOR('',#30028,1.); +#30028 = DIRECTION('',(-1.,0.)); +#30029 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30030 = ORIENTED_EDGE('',*,*,#30031,.T.); +#30031 = EDGE_CURVE('',#30008,#30032,#30034,.T.); +#30032 = VERTEX_POINT('',#30033); +#30033 = CARTESIAN_POINT('',(3.,2.11,5.551115123126E-17)); +#30034 = SURFACE_CURVE('',#30035,(#30039,#30046),.PCURVE_S1.); +#30035 = LINE('',#30036,#30037); +#30036 = CARTESIAN_POINT('',(2.65,2.11,5.551115123126E-17)); +#30037 = VECTOR('',#30038,1.); +#30038 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#30039 = PCURVE('',#29805,#30040); +#30040 = DEFINITIONAL_REPRESENTATION('',(#30041),#30045); +#30041 = LINE('',#30042,#30043); +#30042 = CARTESIAN_POINT('',(-0.532659657565,-0.23421032799)); +#30043 = VECTOR('',#30044,1.); +#30044 = DIRECTION('',(0.,-1.)); +#30045 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30046 = PCURVE('',#30047,#30052); +#30047 = PLANE('',#30048); +#30048 = AXIS2_PLACEMENT_3D('',#30049,#30050,#30051); +#30049 = CARTESIAN_POINT('',(2.65,2.11,5.551115123126E-17)); +#30050 = DIRECTION('',(0.,0.,1.)); +#30051 = DIRECTION('',(1.,2.22044604925E-16,-0.)); +#30052 = DEFINITIONAL_REPRESENTATION('',(#30053),#30057); +#30053 = LINE('',#30054,#30055); +#30054 = CARTESIAN_POINT('',(0.,0.)); +#30055 = VECTOR('',#30056,1.); +#30056 = DIRECTION('',(1.,0.)); +#30057 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30058 = ORIENTED_EDGE('',*,*,#30059,.T.); +#30059 = EDGE_CURVE('',#30032,#30060,#30062,.T.); +#30060 = VERTEX_POINT('',#30061); +#30061 = CARTESIAN_POINT('',(3.,2.11,0.2)); +#30062 = SURFACE_CURVE('',#30063,(#30067,#30074),.PCURVE_S1.); +#30063 = LINE('',#30064,#30065); +#30064 = CARTESIAN_POINT('',(3.,2.11,5.551115123126E-17)); +#30065 = VECTOR('',#30066,1.); +#30066 = DIRECTION('',(0.,0.,1.)); +#30067 = PCURVE('',#29805,#30068); +#30068 = DEFINITIONAL_REPRESENTATION('',(#30069),#30073); +#30069 = LINE('',#30070,#30071); +#30070 = CARTESIAN_POINT('',(-0.532659657565,-0.58421032799)); +#30071 = VECTOR('',#30072,1.); +#30072 = DIRECTION('',(1.,0.)); +#30073 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30074 = PCURVE('',#30075,#30080); +#30075 = PLANE('',#30076); +#30076 = AXIS2_PLACEMENT_3D('',#30077,#30078,#30079); +#30077 = CARTESIAN_POINT('',(3.,2.11,5.551115123126E-17)); +#30078 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#30079 = DIRECTION('',(0.,0.,1.)); +#30080 = DEFINITIONAL_REPRESENTATION('',(#30081),#30085); +#30081 = LINE('',#30082,#30083); +#30082 = CARTESIAN_POINT('',(0.,0.)); +#30083 = VECTOR('',#30084,1.); +#30084 = DIRECTION('',(1.,0.)); +#30085 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30086 = ORIENTED_EDGE('',*,*,#30087,.T.); +#30087 = EDGE_CURVE('',#30060,#30088,#30090,.T.); +#30088 = VERTEX_POINT('',#30089); +#30089 = CARTESIAN_POINT('',(2.65,2.11,0.2)); +#30090 = SURFACE_CURVE('',#30091,(#30095,#30102),.PCURVE_S1.); +#30091 = LINE('',#30092,#30093); +#30092 = CARTESIAN_POINT('',(3.,2.11,0.2)); +#30093 = VECTOR('',#30094,1.); +#30094 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#30095 = PCURVE('',#29805,#30096); +#30096 = DEFINITIONAL_REPRESENTATION('',(#30097),#30101); +#30097 = LINE('',#30098,#30099); +#30098 = CARTESIAN_POINT('',(-0.332659657565,-0.58421032799)); +#30099 = VECTOR('',#30100,1.); +#30100 = DIRECTION('',(0.,1.)); +#30101 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30102 = PCURVE('',#30103,#30108); +#30103 = PLANE('',#30104); +#30104 = AXIS2_PLACEMENT_3D('',#30105,#30106,#30107); +#30105 = CARTESIAN_POINT('',(3.,2.11,0.2)); +#30106 = DIRECTION('',(0.,0.,-1.)); +#30107 = DIRECTION('',(-1.,-2.22044604925E-16,-0.)); +#30108 = DEFINITIONAL_REPRESENTATION('',(#30109),#30113); +#30109 = LINE('',#30110,#30111); +#30110 = CARTESIAN_POINT('',(-0.,0.)); +#30111 = VECTOR('',#30112,1.); +#30112 = DIRECTION('',(1.,0.)); +#30113 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30114 = ORIENTED_EDGE('',*,*,#30115,.T.); +#30115 = EDGE_CURVE('',#30088,#30116,#30118,.T.); +#30116 = VERTEX_POINT('',#30117); +#30117 = CARTESIAN_POINT('',(2.55,2.11,0.3)); +#30118 = SURFACE_CURVE('',#30119,(#30124,#30135),.PCURVE_S1.); +#30119 = CIRCLE('',#30120,0.1); +#30120 = AXIS2_PLACEMENT_3D('',#30121,#30122,#30123); +#30121 = CARTESIAN_POINT('',(2.65,2.11,0.3)); +#30122 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#30123 = DIRECTION('',(0.,0.,-1.)); +#30124 = PCURVE('',#29805,#30125); +#30125 = DEFINITIONAL_REPRESENTATION('',(#30126),#30134); +#30126 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#30127,#30128,#30129,#30130 + ,#30131,#30132,#30133),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#30127 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#30128 = CARTESIAN_POINT('',(-0.332659657565,-6.100524723311E-02)); +#30129 = CARTESIAN_POINT('',(-0.182659657565,-0.147607787612)); +#30130 = CARTESIAN_POINT('',(-3.2659657565E-02,-0.23421032799)); +#30131 = CARTESIAN_POINT('',(-0.182659657565,-0.320812868368)); +#30132 = CARTESIAN_POINT('',(-0.332659657565,-0.407415408747)); +#30133 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#30134 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30135 = PCURVE('',#30136,#30141); +#30136 = CYLINDRICAL_SURFACE('',#30137,0.1); +#30137 = AXIS2_PLACEMENT_3D('',#30138,#30139,#30140); +#30138 = CARTESIAN_POINT('',(2.65,2.11,0.3)); +#30139 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#30140 = DIRECTION('',(0.,0.,-1.)); +#30141 = DEFINITIONAL_REPRESENTATION('',(#30142),#30146); +#30142 = LINE('',#30143,#30144); +#30143 = CARTESIAN_POINT('',(0.,0.)); +#30144 = VECTOR('',#30145,1.); +#30145 = DIRECTION('',(1.,0.)); +#30146 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30147 = ORIENTED_EDGE('',*,*,#30148,.T.); +#30148 = EDGE_CURVE('',#30116,#30149,#30151,.T.); +#30149 = VERTEX_POINT('',#30150); +#30150 = CARTESIAN_POINT('',(2.55,2.11,0.725)); +#30151 = SURFACE_CURVE('',#30152,(#30156,#30163),.PCURVE_S1.); +#30152 = LINE('',#30153,#30154); +#30153 = CARTESIAN_POINT('',(2.55,2.11,0.3)); +#30154 = VECTOR('',#30155,1.); +#30155 = DIRECTION('',(0.,0.,1.)); +#30156 = PCURVE('',#29805,#30157); +#30157 = DEFINITIONAL_REPRESENTATION('',(#30158),#30162); +#30158 = LINE('',#30159,#30160); +#30159 = CARTESIAN_POINT('',(-0.232659657565,-0.13421032799)); +#30160 = VECTOR('',#30161,1.); +#30161 = DIRECTION('',(1.,0.)); +#30162 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30163 = PCURVE('',#30164,#30169); +#30164 = PLANE('',#30165); +#30165 = AXIS2_PLACEMENT_3D('',#30166,#30167,#30168); +#30166 = CARTESIAN_POINT('',(2.55,2.11,0.3)); +#30167 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#30168 = DIRECTION('',(0.,0.,1.)); +#30169 = DEFINITIONAL_REPRESENTATION('',(#30170),#30174); +#30170 = LINE('',#30171,#30172); +#30171 = CARTESIAN_POINT('',(0.,0.)); +#30172 = VECTOR('',#30173,1.); +#30173 = DIRECTION('',(1.,0.)); +#30174 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30175 = ORIENTED_EDGE('',*,*,#30176,.T.); +#30176 = EDGE_CURVE('',#30149,#30177,#30179,.T.); +#30177 = VERTEX_POINT('',#30178); +#30178 = CARTESIAN_POINT('',(2.25,2.11,1.025)); +#30179 = SURFACE_CURVE('',#30180,(#30185,#30192),.PCURVE_S1.); +#30180 = CIRCLE('',#30181,0.3); +#30181 = AXIS2_PLACEMENT_3D('',#30182,#30183,#30184); +#30182 = CARTESIAN_POINT('',(2.25,2.11,0.725)); +#30183 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#30184 = DIRECTION('',(1.,2.22044604925E-16,3.700743415417E-16)); +#30185 = PCURVE('',#29805,#30186); +#30186 = DEFINITIONAL_REPRESENTATION('',(#30187),#30191); +#30187 = CIRCLE('',#30188,0.3); +#30188 = AXIS2_PLACEMENT_2D('',#30189,#30190); +#30189 = CARTESIAN_POINT('',(0.192340342435,0.16578967201)); +#30190 = DIRECTION('',(3.700743415417E-16,-1.)); +#30191 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30192 = PCURVE('',#30193,#30198); +#30193 = CYLINDRICAL_SURFACE('',#30194,0.3); +#30194 = AXIS2_PLACEMENT_3D('',#30195,#30196,#30197); +#30195 = CARTESIAN_POINT('',(2.25,2.11,0.725)); +#30196 = DIRECTION('',(-2.22044604925E-16,1.,-0.)); +#30197 = DIRECTION('',(1.,2.22044604925E-16,3.700743415417E-16)); +#30198 = DEFINITIONAL_REPRESENTATION('',(#30199),#30203); +#30199 = LINE('',#30200,#30201); +#30200 = CARTESIAN_POINT('',(6.28318530718,0.)); +#30201 = VECTOR('',#30202,1.); +#30202 = DIRECTION('',(-1.,0.)); +#30203 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30204 = ORIENTED_EDGE('',*,*,#30205,.T.); +#30205 = EDGE_CURVE('',#30177,#29977,#30206,.T.); +#30206 = SURFACE_CURVE('',#30207,(#30211,#30218),.PCURVE_S1.); +#30207 = LINE('',#30208,#30209); +#30208 = CARTESIAN_POINT('',(2.25,2.11,1.025)); +#30209 = VECTOR('',#30210,1.); +#30210 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#30211 = PCURVE('',#29805,#30212); +#30212 = DEFINITIONAL_REPRESENTATION('',(#30213),#30217); +#30213 = LINE('',#30214,#30215); +#30214 = CARTESIAN_POINT('',(0.492340342435,0.16578967201)); +#30215 = VECTOR('',#30216,1.); +#30216 = DIRECTION('',(0.,1.)); +#30217 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30218 = PCURVE('',#30219,#30224); +#30219 = PLANE('',#30220); +#30220 = AXIS2_PLACEMENT_3D('',#30221,#30222,#30223); +#30221 = CARTESIAN_POINT('',(2.25,2.11,1.025)); +#30222 = DIRECTION('',(0.,0.,-1.)); +#30223 = DIRECTION('',(-1.,-2.22044604925E-16,-0.)); +#30224 = DEFINITIONAL_REPRESENTATION('',(#30225),#30229); +#30225 = LINE('',#30226,#30227); +#30226 = CARTESIAN_POINT('',(-0.,0.)); +#30227 = VECTOR('',#30228,1.); +#30228 = DIRECTION('',(1.,0.)); +#30229 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30230 = ADVANCED_FACE('',(#30231),#29746,.T.); +#30231 = FACE_BOUND('',#30232,.T.); +#30232 = EDGE_LOOP('',(#30233,#30261,#30262,#30263,#30264,#30288,#30311, + #30334,#30357,#30385,#30408,#30432)); +#30233 = ORIENTED_EDGE('',*,*,#30234,.F.); +#30234 = EDGE_CURVE('',#29848,#30235,#30237,.T.); +#30235 = VERTEX_POINT('',#30236); +#30236 = CARTESIAN_POINT('',(1.95,1.7,1.025)); +#30237 = SURFACE_CURVE('',#30238,(#30242,#30249),.PCURVE_S1.); +#30238 = LINE('',#30239,#30240); +#30239 = CARTESIAN_POINT('',(1.95,1.7,0.778829828783)); +#30240 = VECTOR('',#30241,1.); +#30241 = DIRECTION('',(0.,0.,1.)); +#30242 = PCURVE('',#29746,#30243); +#30243 = DEFINITIONAL_REPRESENTATION('',(#30244),#30248); +#30244 = LINE('',#30245,#30246); +#30245 = CARTESIAN_POINT('',(0.246170171218,0.46578967201)); +#30246 = VECTOR('',#30247,1.); +#30247 = DIRECTION('',(1.,0.)); +#30248 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30249 = PCURVE('',#30250,#30255); +#30250 = PLANE('',#30251); +#30251 = AXIS2_PLACEMENT_3D('',#30252,#30253,#30254); +#30252 = CARTESIAN_POINT('',(1.95,2.275,1.025)); +#30253 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#30254 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#30255 = DEFINITIONAL_REPRESENTATION('',(#30256),#30260); +#30256 = LINE('',#30257,#30258); +#30257 = CARTESIAN_POINT('',(0.575,-0.246170171217)); +#30258 = VECTOR('',#30259,1.); +#30259 = DIRECTION('',(0.,1.)); +#30260 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30261 = ORIENTED_EDGE('',*,*,#29875,.T.); +#30262 = ORIENTED_EDGE('',*,*,#29729,.T.); +#30263 = ORIENTED_EDGE('',*,*,#29901,.T.); +#30264 = ORIENTED_EDGE('',*,*,#30265,.T.); +#30265 = EDGE_CURVE('',#29902,#30266,#30268,.T.); +#30266 = VERTEX_POINT('',#30267); +#30267 = CARTESIAN_POINT('',(2.65,1.7,5.551115123126E-17)); +#30268 = SURFACE_CURVE('',#30269,(#30274,#30281),.PCURVE_S1.); +#30269 = CIRCLE('',#30270,0.3); +#30270 = AXIS2_PLACEMENT_3D('',#30271,#30272,#30273); +#30271 = CARTESIAN_POINT('',(2.65,1.7,0.3)); +#30272 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#30273 = DIRECTION('',(-1.,-2.22044604925E-16,3.515706244646E-15)); +#30274 = PCURVE('',#29746,#30275); +#30275 = DEFINITIONAL_REPRESENTATION('',(#30276),#30280); +#30276 = CIRCLE('',#30277,0.3); +#30277 = AXIS2_PLACEMENT_2D('',#30278,#30279); +#30278 = CARTESIAN_POINT('',(-0.232659657565,-0.23421032799)); +#30279 = DIRECTION('',(3.515706244646E-15,1.)); +#30280 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30281 = PCURVE('',#29940,#30282); +#30282 = DEFINITIONAL_REPRESENTATION('',(#30283),#30287); +#30283 = LINE('',#30284,#30285); +#30284 = CARTESIAN_POINT('',(6.28318530718,-0.41)); +#30285 = VECTOR('',#30286,1.); +#30286 = DIRECTION('',(-1.,-1.413579858428E-16)); +#30287 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30288 = ORIENTED_EDGE('',*,*,#30289,.T.); +#30289 = EDGE_CURVE('',#30266,#30290,#30292,.T.); +#30290 = VERTEX_POINT('',#30291); +#30291 = CARTESIAN_POINT('',(3.,1.7,5.551115123126E-17)); +#30292 = SURFACE_CURVE('',#30293,(#30297,#30304),.PCURVE_S1.); +#30293 = LINE('',#30294,#30295); +#30294 = CARTESIAN_POINT('',(2.65,1.7,5.551115123126E-17)); +#30295 = VECTOR('',#30296,1.); +#30296 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#30297 = PCURVE('',#29746,#30298); +#30298 = DEFINITIONAL_REPRESENTATION('',(#30299),#30303); +#30299 = LINE('',#30300,#30301); +#30300 = CARTESIAN_POINT('',(-0.532659657565,-0.23421032799)); +#30301 = VECTOR('',#30302,1.); +#30302 = DIRECTION('',(0.,-1.)); +#30303 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30304 = PCURVE('',#30047,#30305); +#30305 = DEFINITIONAL_REPRESENTATION('',(#30306),#30310); +#30306 = LINE('',#30307,#30308); +#30307 = CARTESIAN_POINT('',(-9.103828801925E-17,-0.41)); +#30308 = VECTOR('',#30309,1.); +#30309 = DIRECTION('',(1.,0.)); +#30310 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30311 = ORIENTED_EDGE('',*,*,#30312,.T.); +#30312 = EDGE_CURVE('',#30290,#30313,#30315,.T.); +#30313 = VERTEX_POINT('',#30314); +#30314 = CARTESIAN_POINT('',(3.,1.7,0.2)); +#30315 = SURFACE_CURVE('',#30316,(#30320,#30327),.PCURVE_S1.); +#30316 = LINE('',#30317,#30318); +#30317 = CARTESIAN_POINT('',(3.,1.7,5.551115123126E-17)); +#30318 = VECTOR('',#30319,1.); +#30319 = DIRECTION('',(0.,0.,1.)); +#30320 = PCURVE('',#29746,#30321); +#30321 = DEFINITIONAL_REPRESENTATION('',(#30322),#30326); +#30322 = LINE('',#30323,#30324); +#30323 = CARTESIAN_POINT('',(-0.532659657565,-0.58421032799)); +#30324 = VECTOR('',#30325,1.); +#30325 = DIRECTION('',(1.,0.)); +#30326 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30327 = PCURVE('',#30075,#30328); +#30328 = DEFINITIONAL_REPRESENTATION('',(#30329),#30333); +#30329 = LINE('',#30330,#30331); +#30330 = CARTESIAN_POINT('',(0.,-0.41)); +#30331 = VECTOR('',#30332,1.); +#30332 = DIRECTION('',(1.,0.)); +#30333 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30334 = ORIENTED_EDGE('',*,*,#30335,.T.); +#30335 = EDGE_CURVE('',#30313,#30336,#30338,.T.); +#30336 = VERTEX_POINT('',#30337); +#30337 = CARTESIAN_POINT('',(2.65,1.7,0.2)); +#30338 = SURFACE_CURVE('',#30339,(#30343,#30350),.PCURVE_S1.); +#30339 = LINE('',#30340,#30341); +#30340 = CARTESIAN_POINT('',(3.,1.7,0.2)); +#30341 = VECTOR('',#30342,1.); +#30342 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#30343 = PCURVE('',#29746,#30344); +#30344 = DEFINITIONAL_REPRESENTATION('',(#30345),#30349); +#30345 = LINE('',#30346,#30347); +#30346 = CARTESIAN_POINT('',(-0.332659657565,-0.58421032799)); +#30347 = VECTOR('',#30348,1.); +#30348 = DIRECTION('',(0.,1.)); +#30349 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30350 = PCURVE('',#30103,#30351); +#30351 = DEFINITIONAL_REPRESENTATION('',(#30352),#30356); +#30352 = LINE('',#30353,#30354); +#30353 = CARTESIAN_POINT('',(9.103828801925E-17,-0.41)); +#30354 = VECTOR('',#30355,1.); +#30355 = DIRECTION('',(1.,0.)); +#30356 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30357 = ORIENTED_EDGE('',*,*,#30358,.T.); +#30358 = EDGE_CURVE('',#30336,#30359,#30361,.T.); +#30359 = VERTEX_POINT('',#30360); +#30360 = CARTESIAN_POINT('',(2.55,1.7,0.3)); +#30361 = SURFACE_CURVE('',#30362,(#30367,#30378),.PCURVE_S1.); +#30362 = CIRCLE('',#30363,0.1); +#30363 = AXIS2_PLACEMENT_3D('',#30364,#30365,#30366); +#30364 = CARTESIAN_POINT('',(2.65,1.7,0.3)); +#30365 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#30366 = DIRECTION('',(0.,0.,-1.)); +#30367 = PCURVE('',#29746,#30368); +#30368 = DEFINITIONAL_REPRESENTATION('',(#30369),#30377); +#30369 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#30370,#30371,#30372,#30373 + ,#30374,#30375,#30376),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#30370 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#30371 = CARTESIAN_POINT('',(-0.332659657565,-6.100524723311E-02)); +#30372 = CARTESIAN_POINT('',(-0.182659657565,-0.147607787612)); +#30373 = CARTESIAN_POINT('',(-3.2659657565E-02,-0.23421032799)); +#30374 = CARTESIAN_POINT('',(-0.182659657565,-0.320812868368)); +#30375 = CARTESIAN_POINT('',(-0.332659657565,-0.407415408747)); +#30376 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#30377 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30378 = PCURVE('',#30136,#30379); +#30379 = DEFINITIONAL_REPRESENTATION('',(#30380),#30384); +#30380 = LINE('',#30381,#30382); +#30381 = CARTESIAN_POINT('',(0.,-0.41)); +#30382 = VECTOR('',#30383,1.); +#30383 = DIRECTION('',(1.,0.)); +#30384 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30385 = ORIENTED_EDGE('',*,*,#30386,.T.); +#30386 = EDGE_CURVE('',#30359,#30387,#30389,.T.); +#30387 = VERTEX_POINT('',#30388); +#30388 = CARTESIAN_POINT('',(2.55,1.7,0.725)); +#30389 = SURFACE_CURVE('',#30390,(#30394,#30401),.PCURVE_S1.); +#30390 = LINE('',#30391,#30392); +#30391 = CARTESIAN_POINT('',(2.55,1.7,0.3)); +#30392 = VECTOR('',#30393,1.); +#30393 = DIRECTION('',(0.,0.,1.)); +#30394 = PCURVE('',#29746,#30395); +#30395 = DEFINITIONAL_REPRESENTATION('',(#30396),#30400); +#30396 = LINE('',#30397,#30398); +#30397 = CARTESIAN_POINT('',(-0.232659657565,-0.13421032799)); +#30398 = VECTOR('',#30399,1.); +#30399 = DIRECTION('',(1.,0.)); +#30400 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30401 = PCURVE('',#30164,#30402); +#30402 = DEFINITIONAL_REPRESENTATION('',(#30403),#30407); +#30403 = LINE('',#30404,#30405); +#30404 = CARTESIAN_POINT('',(0.,-0.41)); +#30405 = VECTOR('',#30406,1.); +#30406 = DIRECTION('',(1.,0.)); +#30407 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30408 = ORIENTED_EDGE('',*,*,#30409,.T.); +#30409 = EDGE_CURVE('',#30387,#30410,#30412,.T.); +#30410 = VERTEX_POINT('',#30411); +#30411 = CARTESIAN_POINT('',(2.25,1.7,1.025)); +#30412 = SURFACE_CURVE('',#30413,(#30418,#30425),.PCURVE_S1.); +#30413 = CIRCLE('',#30414,0.3); +#30414 = AXIS2_PLACEMENT_3D('',#30415,#30416,#30417); +#30415 = CARTESIAN_POINT('',(2.25,1.7,0.725)); +#30416 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#30417 = DIRECTION('',(1.,2.22044604925E-16,3.700743415417E-16)); +#30418 = PCURVE('',#29746,#30419); +#30419 = DEFINITIONAL_REPRESENTATION('',(#30420),#30424); +#30420 = CIRCLE('',#30421,0.3); +#30421 = AXIS2_PLACEMENT_2D('',#30422,#30423); +#30422 = CARTESIAN_POINT('',(0.192340342435,0.16578967201)); +#30423 = DIRECTION('',(3.700743415417E-16,-1.)); +#30424 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30425 = PCURVE('',#30193,#30426); +#30426 = DEFINITIONAL_REPRESENTATION('',(#30427),#30431); +#30427 = LINE('',#30428,#30429); +#30428 = CARTESIAN_POINT('',(6.28318530718,-0.41)); +#30429 = VECTOR('',#30430,1.); +#30430 = DIRECTION('',(-1.,1.413579858428E-16)); +#30431 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30432 = ORIENTED_EDGE('',*,*,#30433,.T.); +#30433 = EDGE_CURVE('',#30410,#30235,#30434,.T.); +#30434 = SURFACE_CURVE('',#30435,(#30439,#30446),.PCURVE_S1.); +#30435 = LINE('',#30436,#30437); +#30436 = CARTESIAN_POINT('',(2.25,1.7,1.025)); +#30437 = VECTOR('',#30438,1.); +#30438 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#30439 = PCURVE('',#29746,#30440); +#30440 = DEFINITIONAL_REPRESENTATION('',(#30441),#30445); +#30441 = LINE('',#30442,#30443); +#30442 = CARTESIAN_POINT('',(0.492340342435,0.16578967201)); +#30443 = VECTOR('',#30444,1.); +#30444 = DIRECTION('',(0.,1.)); +#30445 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30446 = PCURVE('',#30219,#30447); +#30447 = DEFINITIONAL_REPRESENTATION('',(#30448),#30452); +#30448 = LINE('',#30449,#30450); +#30449 = CARTESIAN_POINT('',(9.103828801925E-17,-0.41)); +#30450 = VECTOR('',#30451,1.); +#30451 = DIRECTION('',(1.,0.)); +#30452 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30453 = ADVANCED_FACE('',(#30454),#29863,.F.); +#30454 = FACE_BOUND('',#30455,.F.); +#30455 = EDGE_LOOP('',(#30456,#30485,#30512,#30540,#30568,#30596,#30624, + #30652,#30680,#30701,#30702,#30725)); +#30456 = ORIENTED_EDGE('',*,*,#30457,.T.); +#30457 = EDGE_CURVE('',#30458,#30460,#30462,.T.); +#30458 = VERTEX_POINT('',#30459); +#30459 = CARTESIAN_POINT('',(1.835171280765,2.217585640382,0.1)); +#30460 = VERTEX_POINT('',#30461); +#30461 = CARTESIAN_POINT('',(1.835171280765,-2.217585640382,0.1)); +#30462 = SURFACE_CURVE('',#30463,(#30467,#30473),.PCURVE_S1.); +#30463 = LINE('',#30464,#30465); +#30464 = CARTESIAN_POINT('',(1.835171280765,2.217585640382,0.1)); +#30465 = VECTOR('',#30466,1.); +#30466 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#30467 = PCURVE('',#29863,#30468); +#30468 = DEFINITIONAL_REPRESENTATION('',(#30469),#30472); +#30469 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#30470,#30471),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,4.435171280764),.PIECEWISE_BEZIER_KNOTS.); +#30470 = CARTESIAN_POINT('',(-4.94827695417E-16,-2.662846262169E-17)); +#30471 = CARTESIAN_POINT('',(4.55,1.773999406632E-16)); +#30472 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30473 = PCURVE('',#30474,#30479); +#30474 = PLANE('',#30475); +#30475 = AXIS2_PLACEMENT_3D('',#30476,#30477,#30478); +#30476 = CARTESIAN_POINT('',(-1.717585640382,2.335171280765,0.1)); +#30477 = DIRECTION('',(0.,0.,1.)); +#30478 = DIRECTION('',(0.592513131498,-0.805560791625,0.)); +#30479 = DEFINITIONAL_REPRESENTATION('',(#30480),#30484); +#30480 = LINE('',#30481,#30482); +#30481 = CARTESIAN_POINT('',(2.199777510349,2.792290641846)); +#30482 = VECTOR('',#30483,1.); +#30483 = DIRECTION('',(0.805560791625,-0.592513131498)); +#30484 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30485 = ORIENTED_EDGE('',*,*,#30486,.T.); +#30486 = EDGE_CURVE('',#30460,#30487,#30489,.T.); +#30487 = VERTEX_POINT('',#30488); +#30488 = CARTESIAN_POINT('',(1.95,-2.275,0.825)); +#30489 = SURFACE_CURVE('',#30490,(#30493,#30500),.PCURVE_S1.); +#30490 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#30491,#30492),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#30491 = CARTESIAN_POINT('',(1.835171280765,-2.217585640382,0.1)); +#30492 = CARTESIAN_POINT('',(1.95,-2.275,0.825)); +#30493 = PCURVE('',#29863,#30494); +#30494 = DEFINITIONAL_REPRESENTATION('',(#30495),#30499); +#30495 = LINE('',#30496,#30497); +#30496 = CARTESIAN_POINT('',(4.55,-9.333496124434E-18)); +#30497 = VECTOR('',#30498,1.); +#30498 = DIRECTION('',(0.,1.)); +#30499 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30500 = PCURVE('',#30501,#30506); +#30501 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#30502,#30503) + ,(#30504,#30505 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#30502 = CARTESIAN_POINT('',(1.835171280765,-2.217585640382,0.1)); +#30503 = CARTESIAN_POINT('',(1.95,-2.275,0.825)); +#30504 = CARTESIAN_POINT('',(1.717585640382,-2.335171280765,0.1)); +#30505 = CARTESIAN_POINT('',(1.775,-2.45,0.825)); +#30506 = DEFINITIONAL_REPRESENTATION('',(#30507),#30511); +#30507 = LINE('',#30508,#30509); +#30508 = CARTESIAN_POINT('',(2.992756715082E-16,-4.171445780772E-17)); +#30509 = VECTOR('',#30510,1.); +#30510 = DIRECTION('',(-8.858060589813E-17,1.)); +#30511 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30512 = ORIENTED_EDGE('',*,*,#30513,.F.); +#30513 = EDGE_CURVE('',#30514,#30487,#30516,.T.); +#30514 = VERTEX_POINT('',#30515); +#30515 = CARTESIAN_POINT('',(1.95,-2.11,0.825)); +#30516 = SURFACE_CURVE('',#30517,(#30521,#30528),.PCURVE_S1.); +#30517 = LINE('',#30518,#30519); +#30518 = CARTESIAN_POINT('',(1.95,2.275,0.825)); +#30519 = VECTOR('',#30520,1.); +#30520 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#30521 = PCURVE('',#29863,#30522); +#30522 = DEFINITIONAL_REPRESENTATION('',(#30523),#30527); +#30523 = LINE('',#30524,#30525); +#30524 = CARTESIAN_POINT('',(8.881784197001E-16,1.)); +#30525 = VECTOR('',#30526,1.); +#30526 = DIRECTION('',(1.,0.)); +#30527 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30528 = PCURVE('',#30529,#30534); +#30529 = PLANE('',#30530); +#30530 = AXIS2_PLACEMENT_3D('',#30531,#30532,#30533); +#30531 = CARTESIAN_POINT('',(1.95,2.275,1.025)); +#30532 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#30533 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#30534 = DEFINITIONAL_REPRESENTATION('',(#30535),#30539); +#30535 = LINE('',#30536,#30537); +#30536 = CARTESIAN_POINT('',(0.,-0.2)); +#30537 = VECTOR('',#30538,1.); +#30538 = DIRECTION('',(1.,0.)); +#30539 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30540 = ORIENTED_EDGE('',*,*,#30541,.F.); +#30541 = EDGE_CURVE('',#30542,#30514,#30544,.T.); +#30542 = VERTEX_POINT('',#30543); +#30543 = CARTESIAN_POINT('',(1.95,-1.7,0.825)); +#30544 = SURFACE_CURVE('',#30545,(#30549,#30556),.PCURVE_S1.); +#30545 = LINE('',#30546,#30547); +#30546 = CARTESIAN_POINT('',(1.95,2.275,0.825)); +#30547 = VECTOR('',#30548,1.); +#30548 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#30549 = PCURVE('',#29863,#30550); +#30550 = DEFINITIONAL_REPRESENTATION('',(#30551),#30555); +#30551 = LINE('',#30552,#30553); +#30552 = CARTESIAN_POINT('',(4.440892098501E-16,1.)); +#30553 = VECTOR('',#30554,1.); +#30554 = DIRECTION('',(1.,0.)); +#30555 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30556 = PCURVE('',#30557,#30562); +#30557 = PLANE('',#30558); +#30558 = AXIS2_PLACEMENT_3D('',#30559,#30560,#30561); +#30559 = CARTESIAN_POINT('',(1.8,-1.7,0.825)); +#30560 = DIRECTION('',(0.,0.,1.)); +#30561 = DIRECTION('',(1.,2.22044604925E-16,-0.)); +#30562 = DEFINITIONAL_REPRESENTATION('',(#30563),#30567); +#30563 = LINE('',#30564,#30565); +#30564 = CARTESIAN_POINT('',(0.15,3.975)); +#30565 = VECTOR('',#30566,1.); +#30566 = DIRECTION('',(0.,-1.)); +#30567 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30568 = ORIENTED_EDGE('',*,*,#30569,.F.); +#30569 = EDGE_CURVE('',#30570,#30542,#30572,.T.); +#30570 = VERTEX_POINT('',#30571); +#30571 = CARTESIAN_POINT('',(1.95,-0.84,0.825)); +#30572 = SURFACE_CURVE('',#30573,(#30577,#30584),.PCURVE_S1.); +#30573 = LINE('',#30574,#30575); +#30574 = CARTESIAN_POINT('',(1.95,2.275,0.825)); +#30575 = VECTOR('',#30576,1.); +#30576 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#30577 = PCURVE('',#29863,#30578); +#30578 = DEFINITIONAL_REPRESENTATION('',(#30579),#30583); +#30579 = LINE('',#30580,#30581); +#30580 = CARTESIAN_POINT('',(4.440892098501E-16,1.)); +#30581 = VECTOR('',#30582,1.); +#30582 = DIRECTION('',(1.,0.)); +#30583 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30584 = PCURVE('',#30585,#30590); +#30585 = PLANE('',#30586); +#30586 = AXIS2_PLACEMENT_3D('',#30587,#30588,#30589); +#30587 = CARTESIAN_POINT('',(1.95,2.275,1.025)); +#30588 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#30589 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#30590 = DEFINITIONAL_REPRESENTATION('',(#30591),#30595); +#30591 = LINE('',#30592,#30593); +#30592 = CARTESIAN_POINT('',(0.,-0.2)); +#30593 = VECTOR('',#30594,1.); +#30594 = DIRECTION('',(1.,0.)); +#30595 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30596 = ORIENTED_EDGE('',*,*,#30597,.F.); +#30597 = EDGE_CURVE('',#30598,#30570,#30600,.T.); +#30598 = VERTEX_POINT('',#30599); +#30599 = CARTESIAN_POINT('',(1.95,-0.43,0.825)); +#30600 = SURFACE_CURVE('',#30601,(#30605,#30612),.PCURVE_S1.); +#30601 = LINE('',#30602,#30603); +#30602 = CARTESIAN_POINT('',(1.95,2.275,0.825)); +#30603 = VECTOR('',#30604,1.); +#30604 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#30605 = PCURVE('',#29863,#30606); +#30606 = DEFINITIONAL_REPRESENTATION('',(#30607),#30611); +#30607 = LINE('',#30608,#30609); +#30608 = CARTESIAN_POINT('',(4.440892098501E-16,1.)); +#30609 = VECTOR('',#30610,1.); +#30610 = DIRECTION('',(1.,-5.415722071342E-16)); +#30611 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30612 = PCURVE('',#30613,#30618); +#30613 = PLANE('',#30614); +#30614 = AXIS2_PLACEMENT_3D('',#30615,#30616,#30617); +#30615 = CARTESIAN_POINT('',(1.8,-0.43,0.825)); +#30616 = DIRECTION('',(0.,0.,1.)); +#30617 = DIRECTION('',(1.,2.22044604925E-16,-0.)); +#30618 = DEFINITIONAL_REPRESENTATION('',(#30619),#30623); +#30619 = LINE('',#30620,#30621); +#30620 = CARTESIAN_POINT('',(0.15,2.705)); +#30621 = VECTOR('',#30622,1.); +#30622 = DIRECTION('',(0.,-1.)); +#30623 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30624 = ORIENTED_EDGE('',*,*,#30625,.F.); +#30625 = EDGE_CURVE('',#30626,#30598,#30628,.T.); +#30626 = VERTEX_POINT('',#30627); +#30627 = CARTESIAN_POINT('',(1.95,0.43,0.825)); +#30628 = SURFACE_CURVE('',#30629,(#30633,#30640),.PCURVE_S1.); +#30629 = LINE('',#30630,#30631); +#30630 = CARTESIAN_POINT('',(1.95,2.275,0.825)); +#30631 = VECTOR('',#30632,1.); +#30632 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#30633 = PCURVE('',#29863,#30634); +#30634 = DEFINITIONAL_REPRESENTATION('',(#30635),#30639); +#30635 = LINE('',#30636,#30637); +#30636 = CARTESIAN_POINT('',(2.22044604925E-16,1.)); +#30637 = VECTOR('',#30638,1.); +#30638 = DIRECTION('',(1.,0.)); +#30639 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30640 = PCURVE('',#30641,#30646); +#30641 = PLANE('',#30642); +#30642 = AXIS2_PLACEMENT_3D('',#30643,#30644,#30645); +#30643 = CARTESIAN_POINT('',(1.95,2.275,1.025)); +#30644 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#30645 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#30646 = DEFINITIONAL_REPRESENTATION('',(#30647),#30651); +#30647 = LINE('',#30648,#30649); +#30648 = CARTESIAN_POINT('',(0.,-0.2)); +#30649 = VECTOR('',#30650,1.); +#30650 = DIRECTION('',(1.,0.)); +#30651 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30652 = ORIENTED_EDGE('',*,*,#30653,.F.); +#30653 = EDGE_CURVE('',#30654,#30626,#30656,.T.); +#30654 = VERTEX_POINT('',#30655); +#30655 = CARTESIAN_POINT('',(1.95,0.84,0.825)); +#30656 = SURFACE_CURVE('',#30657,(#30661,#30668),.PCURVE_S1.); +#30657 = LINE('',#30658,#30659); +#30658 = CARTESIAN_POINT('',(1.95,2.275,0.825)); +#30659 = VECTOR('',#30660,1.); +#30660 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#30661 = PCURVE('',#29863,#30662); +#30662 = DEFINITIONAL_REPRESENTATION('',(#30663),#30667); +#30663 = LINE('',#30664,#30665); +#30664 = CARTESIAN_POINT('',(2.22044604925E-16,1.)); +#30665 = VECTOR('',#30666,1.); +#30666 = DIRECTION('',(1.,5.415722071342E-16)); +#30667 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30668 = PCURVE('',#30669,#30674); +#30669 = PLANE('',#30670); +#30670 = AXIS2_PLACEMENT_3D('',#30671,#30672,#30673); +#30671 = CARTESIAN_POINT('',(1.8,0.84,0.825)); +#30672 = DIRECTION('',(0.,0.,1.)); +#30673 = DIRECTION('',(1.,2.22044604925E-16,-0.)); +#30674 = DEFINITIONAL_REPRESENTATION('',(#30675),#30679); +#30675 = LINE('',#30676,#30677); +#30676 = CARTESIAN_POINT('',(0.15,1.435)); +#30677 = VECTOR('',#30678,1.); +#30678 = DIRECTION('',(0.,-1.)); +#30679 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30680 = ORIENTED_EDGE('',*,*,#30681,.F.); +#30681 = EDGE_CURVE('',#29848,#30654,#30682,.T.); +#30682 = SURFACE_CURVE('',#30683,(#30687,#30694),.PCURVE_S1.); +#30683 = LINE('',#30684,#30685); +#30684 = CARTESIAN_POINT('',(1.95,2.275,0.825)); +#30685 = VECTOR('',#30686,1.); +#30686 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#30687 = PCURVE('',#29863,#30688); +#30688 = DEFINITIONAL_REPRESENTATION('',(#30689),#30693); +#30689 = LINE('',#30690,#30691); +#30690 = CARTESIAN_POINT('',(0.,1.)); +#30691 = VECTOR('',#30692,1.); +#30692 = DIRECTION('',(1.,0.)); +#30693 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30694 = PCURVE('',#30250,#30695); +#30695 = DEFINITIONAL_REPRESENTATION('',(#30696),#30700); +#30696 = LINE('',#30697,#30698); +#30697 = CARTESIAN_POINT('',(0.,-0.2)); +#30698 = VECTOR('',#30699,1.); +#30699 = DIRECTION('',(1.,0.)); +#30700 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30701 = ORIENTED_EDGE('',*,*,#29847,.F.); +#30702 = ORIENTED_EDGE('',*,*,#30703,.F.); +#30703 = EDGE_CURVE('',#30704,#29825,#30706,.T.); +#30704 = VERTEX_POINT('',#30705); +#30705 = CARTESIAN_POINT('',(1.95,2.275,0.825)); +#30706 = SURFACE_CURVE('',#30707,(#30711,#30718),.PCURVE_S1.); +#30707 = LINE('',#30708,#30709); +#30708 = CARTESIAN_POINT('',(1.95,2.275,0.825)); +#30709 = VECTOR('',#30710,1.); +#30710 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#30711 = PCURVE('',#29863,#30712); +#30712 = DEFINITIONAL_REPRESENTATION('',(#30713),#30717); +#30713 = LINE('',#30714,#30715); +#30714 = CARTESIAN_POINT('',(-3.364087759472E-16,1.)); +#30715 = VECTOR('',#30716,1.); +#30716 = DIRECTION('',(1.,0.)); +#30717 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30718 = PCURVE('',#29992,#30719); +#30719 = DEFINITIONAL_REPRESENTATION('',(#30720),#30724); +#30720 = LINE('',#30721,#30722); +#30721 = CARTESIAN_POINT('',(0.,-0.2)); +#30722 = VECTOR('',#30723,1.); +#30723 = DIRECTION('',(1.,0.)); +#30724 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30725 = ORIENTED_EDGE('',*,*,#30726,.F.); +#30726 = EDGE_CURVE('',#30458,#30704,#30727,.T.); +#30727 = SURFACE_CURVE('',#30728,(#30731,#30738),.PCURVE_S1.); +#30728 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#30729,#30730),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#30729 = CARTESIAN_POINT('',(1.835171280765,2.217585640382,0.1)); +#30730 = CARTESIAN_POINT('',(1.95,2.275,0.825)); +#30731 = PCURVE('',#29863,#30732); +#30732 = DEFINITIONAL_REPRESENTATION('',(#30733),#30737); +#30733 = LINE('',#30734,#30735); +#30734 = CARTESIAN_POINT('',(-4.94827695417E-16,-2.662846262169E-17)); +#30735 = VECTOR('',#30736,1.); +#30736 = DIRECTION('',(6.052250384456E-16,1.)); +#30737 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30738 = PCURVE('',#30739,#30744); +#30739 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#30740,#30741) + ,(#30742,#30743 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#30740 = CARTESIAN_POINT('',(1.717585640382,2.335171280765,0.1)); +#30741 = CARTESIAN_POINT('',(1.775,2.45,0.825)); +#30742 = CARTESIAN_POINT('',(1.835171280765,2.217585640382,0.1)); +#30743 = CARTESIAN_POINT('',(1.95,2.275,0.825)); +#30744 = DEFINITIONAL_REPRESENTATION('',(#30745),#30749); +#30745 = LINE('',#30746,#30747); +#30746 = CARTESIAN_POINT('',(0.247487373415,-8.182109435701E-18)); +#30747 = VECTOR('',#30748,1.); +#30748 = DIRECTION('',(6.106226635438E-16,1.)); +#30749 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30750 = ADVANCED_FACE('',(#30751),#29940,.T.); +#30751 = FACE_BOUND('',#30752,.T.); +#30752 = EDGE_LOOP('',(#30753,#30754,#30775,#30776)); +#30753 = ORIENTED_EDGE('',*,*,#30007,.T.); +#30754 = ORIENTED_EDGE('',*,*,#30755,.T.); +#30755 = EDGE_CURVE('',#30008,#30266,#30756,.T.); +#30756 = SURFACE_CURVE('',#30757,(#30761,#30768),.PCURVE_S1.); +#30757 = LINE('',#30758,#30759); +#30758 = CARTESIAN_POINT('',(2.65,2.11,5.551115123126E-17)); +#30759 = VECTOR('',#30760,1.); +#30760 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#30761 = PCURVE('',#29940,#30762); +#30762 = DEFINITIONAL_REPRESENTATION('',(#30763),#30767); +#30763 = LINE('',#30764,#30765); +#30764 = CARTESIAN_POINT('',(4.712388980385,0.)); +#30765 = VECTOR('',#30766,1.); +#30766 = DIRECTION('',(0.,-1.)); +#30767 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30768 = PCURVE('',#30047,#30769); +#30769 = DEFINITIONAL_REPRESENTATION('',(#30770),#30774); +#30770 = LINE('',#30771,#30772); +#30771 = CARTESIAN_POINT('',(0.,0.)); +#30772 = VECTOR('',#30773,1.); +#30773 = DIRECTION('',(0.,-1.)); +#30774 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30775 = ORIENTED_EDGE('',*,*,#30265,.F.); +#30776 = ORIENTED_EDGE('',*,*,#29924,.F.); +#30777 = ADVANCED_FACE('',(#30778),#29992,.F.); +#30778 = FACE_BOUND('',#30779,.F.); +#30779 = EDGE_LOOP('',(#30780,#30805,#30806,#30807)); +#30780 = ORIENTED_EDGE('',*,*,#30781,.F.); +#30781 = EDGE_CURVE('',#30704,#30782,#30784,.T.); +#30782 = VERTEX_POINT('',#30783); +#30783 = CARTESIAN_POINT('',(1.95,2.275,1.025)); +#30784 = SURFACE_CURVE('',#30785,(#30788,#30794),.PCURVE_S1.); +#30785 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#30786,#30787),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#30786 = CARTESIAN_POINT('',(1.95,2.275,0.825)); +#30787 = CARTESIAN_POINT('',(1.95,2.275,1.025)); +#30788 = PCURVE('',#29992,#30789); +#30789 = DEFINITIONAL_REPRESENTATION('',(#30790),#30793); +#30790 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#30791,#30792),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#30791 = CARTESIAN_POINT('',(0.,-0.2)); +#30792 = CARTESIAN_POINT('',(0.,0.)); +#30793 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30794 = PCURVE('',#30795,#30800); +#30795 = PLANE('',#30796); +#30796 = AXIS2_PLACEMENT_3D('',#30797,#30798,#30799); +#30797 = CARTESIAN_POINT('',(1.775,2.45,1.025)); +#30798 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#30799 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#30800 = DEFINITIONAL_REPRESENTATION('',(#30801),#30804); +#30801 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#30802,#30803),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#30802 = CARTESIAN_POINT('',(0.247487373415,-0.2)); +#30803 = CARTESIAN_POINT('',(0.247487373415,0.)); +#30804 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30805 = ORIENTED_EDGE('',*,*,#30703,.T.); +#30806 = ORIENTED_EDGE('',*,*,#29976,.T.); +#30807 = ORIENTED_EDGE('',*,*,#30808,.F.); +#30808 = EDGE_CURVE('',#30782,#29977,#30809,.T.); +#30809 = SURFACE_CURVE('',#30810,(#30814,#30821),.PCURVE_S1.); +#30810 = LINE('',#30811,#30812); +#30811 = CARTESIAN_POINT('',(1.95,2.275,1.025)); +#30812 = VECTOR('',#30813,1.); +#30813 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#30814 = PCURVE('',#29992,#30815); +#30815 = DEFINITIONAL_REPRESENTATION('',(#30816),#30820); +#30816 = LINE('',#30817,#30818); +#30817 = CARTESIAN_POINT('',(0.,0.)); +#30818 = VECTOR('',#30819,1.); +#30819 = DIRECTION('',(1.,0.)); +#30820 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30821 = PCURVE('',#30822,#30827); +#30822 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#30823,#30824) + ,(#30825,#30826 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.55),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#30823 = CARTESIAN_POINT('',(1.95,2.275,1.025)); +#30824 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#30825 = CARTESIAN_POINT('',(1.95,-2.275,1.025)); +#30826 = CARTESIAN_POINT('',(1.875,-2.2375,1.025)); +#30827 = DEFINITIONAL_REPRESENTATION('',(#30828),#30832); +#30828 = LINE('',#30829,#30830); +#30829 = CARTESIAN_POINT('',(-8.584601827189E-17,6.610125476969E-16)); +#30830 = VECTOR('',#30831,1.); +#30831 = DIRECTION('',(1.,-8.115046621091E-14)); +#30832 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30833 = ADVANCED_FACE('',(#30834),#30219,.F.); +#30834 = FACE_BOUND('',#30835,.F.); +#30835 = EDGE_LOOP('',(#30836,#30837,#30858,#30859,#30909,#30937)); +#30836 = ORIENTED_EDGE('',*,*,#30205,.F.); +#30837 = ORIENTED_EDGE('',*,*,#30838,.T.); +#30838 = EDGE_CURVE('',#30177,#30410,#30839,.T.); +#30839 = SURFACE_CURVE('',#30840,(#30844,#30851),.PCURVE_S1.); +#30840 = LINE('',#30841,#30842); +#30841 = CARTESIAN_POINT('',(2.25,2.11,1.025)); +#30842 = VECTOR('',#30843,1.); +#30843 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#30844 = PCURVE('',#30219,#30845); +#30845 = DEFINITIONAL_REPRESENTATION('',(#30846),#30850); +#30846 = LINE('',#30847,#30848); +#30847 = CARTESIAN_POINT('',(-0.,0.)); +#30848 = VECTOR('',#30849,1.); +#30849 = DIRECTION('',(0.,-1.)); +#30850 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30851 = PCURVE('',#30193,#30852); +#30852 = DEFINITIONAL_REPRESENTATION('',(#30853),#30857); +#30853 = LINE('',#30854,#30855); +#30854 = CARTESIAN_POINT('',(4.712388980385,0.)); +#30855 = VECTOR('',#30856,1.); +#30856 = DIRECTION('',(0.,-1.)); +#30857 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30858 = ORIENTED_EDGE('',*,*,#30433,.T.); +#30859 = ORIENTED_EDGE('',*,*,#30860,.T.); +#30860 = EDGE_CURVE('',#30235,#30861,#30863,.T.); +#30861 = VERTEX_POINT('',#30862); +#30862 = CARTESIAN_POINT('',(1.875,1.7,1.025)); +#30863 = SURFACE_CURVE('',#30864,(#30868,#30875),.PCURVE_S1.); +#30864 = LINE('',#30865,#30866); +#30865 = CARTESIAN_POINT('',(2.25,1.7,1.025)); +#30866 = VECTOR('',#30867,1.); +#30867 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#30868 = PCURVE('',#30219,#30869); +#30869 = DEFINITIONAL_REPRESENTATION('',(#30870),#30874); +#30870 = LINE('',#30871,#30872); +#30871 = CARTESIAN_POINT('',(9.103828801925E-17,-0.41)); +#30872 = VECTOR('',#30873,1.); +#30873 = DIRECTION('',(1.,0.)); +#30874 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30875 = PCURVE('',#30876,#30881); +#30876 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#30877,#30878) + ,(#30879,#30880 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.55),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#30877 = CARTESIAN_POINT('',(1.95,2.275,1.025)); +#30878 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#30879 = CARTESIAN_POINT('',(1.95,-2.275,1.025)); +#30880 = CARTESIAN_POINT('',(1.875,-2.2375,1.025)); +#30881 = DEFINITIONAL_REPRESENTATION('',(#30882),#30908); +#30882 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#30883,#30884,#30885,#30886, + #30887,#30888,#30889,#30890,#30891,#30892,#30893,#30894,#30895, + #30896,#30897,#30898,#30899,#30900,#30901,#30902,#30903,#30904, + #30905,#30906,#30907),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1 + ,1,1,1,1,1,1,1,1,1,1,4),(0.3,0.303409090909,0.306818181818, + 0.310227272727,0.313636363636,0.317045454545,0.320454545455, + 0.323863636364,0.327272727273,0.330681818182,0.334090909091,0.3375, + 0.340909090909,0.344318181818,0.347727272727,0.351136363636, + 0.354545454545,0.357954545455,0.361363636364,0.364772727273, + 0.368181818182,0.371590909091,0.375),.QUASI_UNIFORM_KNOTS.); +#30883 = CARTESIAN_POINT('',(0.575,0.)); +#30884 = CARTESIAN_POINT('',(0.574575424574,1.515151515152E-02)); +#30885 = CARTESIAN_POINT('',(0.5737256375,4.545454545455E-02)); +#30886 = CARTESIAN_POINT('',(0.57244904391,9.090909090909E-02)); +#30887 = CARTESIAN_POINT('',(0.571170533034,0.136363636364)); +#30888 = CARTESIAN_POINT('',(0.56989010055,0.181818181818)); +#30889 = CARTESIAN_POINT('',(0.568607742122,0.227272727273)); +#30890 = CARTESIAN_POINT('',(0.567323453401,0.272727272727)); +#30891 = CARTESIAN_POINT('',(0.566037230026,0.318181818182)); +#30892 = CARTESIAN_POINT('',(0.564749067621,0.363636363636)); +#30893 = CARTESIAN_POINT('',(0.5634589618,0.409090909091)); +#30894 = CARTESIAN_POINT('',(0.56216690816,0.454545454545)); +#30895 = CARTESIAN_POINT('',(0.560872902287,0.5)); +#30896 = CARTESIAN_POINT('',(0.559576939754,0.545454545455)); +#30897 = CARTESIAN_POINT('',(0.558279016117,0.590909090909)); +#30898 = CARTESIAN_POINT('',(0.556979126924,0.636363636364)); +#30899 = CARTESIAN_POINT('',(0.555677267705,0.681818181818)); +#30900 = CARTESIAN_POINT('',(0.554373433979,0.727272727273)); +#30901 = CARTESIAN_POINT('',(0.553067621251,0.772727272727)); +#30902 = CARTESIAN_POINT('',(0.55175982501,0.818181818182)); +#30903 = CARTESIAN_POINT('',(0.550450040735,0.863636363636)); +#30904 = CARTESIAN_POINT('',(0.549138263888,0.909090909091)); +#30905 = CARTESIAN_POINT('',(0.54782448992,0.954545454545)); +#30906 = CARTESIAN_POINT('',(0.546947306149,0.984848484848)); +#30907 = CARTESIAN_POINT('',(0.546508379888,1.)); +#30908 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30909 = ORIENTED_EDGE('',*,*,#30910,.F.); +#30910 = EDGE_CURVE('',#30911,#30861,#30913,.T.); +#30911 = VERTEX_POINT('',#30912); +#30912 = CARTESIAN_POINT('',(1.875,2.11,1.025)); +#30913 = SURFACE_CURVE('',#30914,(#30918,#30925),.PCURVE_S1.); +#30914 = LINE('',#30915,#30916); +#30915 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#30916 = VECTOR('',#30917,1.); +#30917 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#30918 = PCURVE('',#30219,#30919); +#30919 = DEFINITIONAL_REPRESENTATION('',(#30920),#30924); +#30920 = LINE('',#30921,#30922); +#30921 = CARTESIAN_POINT('',(0.375,0.1275)); +#30922 = VECTOR('',#30923,1.); +#30923 = DIRECTION('',(0.,-1.)); +#30924 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30925 = PCURVE('',#30926,#30931); +#30926 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#30927,#30928) + ,(#30929,#30930 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.475),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#30927 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#30928 = CARTESIAN_POINT('',(1.760171280765,2.180085640382,1.75)); +#30929 = CARTESIAN_POINT('',(1.875,-2.2375,1.025)); +#30930 = CARTESIAN_POINT('',(1.760171280765,-2.180085640382,1.75)); +#30931 = DEFINITIONAL_REPRESENTATION('',(#30932),#30936); +#30932 = LINE('',#30933,#30934); +#30933 = CARTESIAN_POINT('',(-1.110223024625E-16,2.030520704916E-16)); +#30934 = VECTOR('',#30935,1.); +#30935 = DIRECTION('',(1.,-2.308285900451E-16)); +#30936 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30937 = ORIENTED_EDGE('',*,*,#30938,.F.); +#30938 = EDGE_CURVE('',#29977,#30911,#30939,.T.); +#30939 = SURFACE_CURVE('',#30940,(#30944,#30951),.PCURVE_S1.); +#30940 = LINE('',#30941,#30942); +#30941 = CARTESIAN_POINT('',(2.25,2.11,1.025)); +#30942 = VECTOR('',#30943,1.); +#30943 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#30944 = PCURVE('',#30219,#30945); +#30945 = DEFINITIONAL_REPRESENTATION('',(#30946),#30950); +#30946 = LINE('',#30947,#30948); +#30947 = CARTESIAN_POINT('',(-0.,0.)); +#30948 = VECTOR('',#30949,1.); +#30949 = DIRECTION('',(1.,0.)); +#30950 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30951 = PCURVE('',#30822,#30952); +#30952 = DEFINITIONAL_REPRESENTATION('',(#30953),#30979); +#30953 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#30954,#30955,#30956,#30957, + #30958,#30959,#30960,#30961,#30962,#30963,#30964,#30965,#30966, + #30967,#30968,#30969,#30970,#30971,#30972,#30973,#30974,#30975, + #30976,#30977,#30978),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1 + ,1,1,1,1,1,1,1,1,1,1,4),(0.3,0.303409090909,0.306818181818, + 0.310227272727,0.313636363636,0.317045454545,0.320454545455, + 0.323863636364,0.327272727273,0.330681818182,0.334090909091,0.3375, + 0.340909090909,0.344318181818,0.347727272727,0.351136363636, + 0.354545454545,0.357954545455,0.361363636364,0.364772727273, + 0.368181818182,0.371590909091,0.375),.QUASI_UNIFORM_KNOTS.); +#30954 = CARTESIAN_POINT('',(0.165,0.)); +#30955 = CARTESIAN_POINT('',(0.164473026972,1.515151515152E-02)); +#30956 = CARTESIAN_POINT('',(0.16341829125,4.545454545455E-02)); +#30957 = CARTESIAN_POINT('',(0.161833813323,9.090909090909E-02)); +#30958 = CARTESIAN_POINT('',(0.160246955707,0.136363636364)); +#30959 = CARTESIAN_POINT('',(0.158657713035,0.181818181818)); +#30960 = CARTESIAN_POINT('',(0.157066079927,0.227272727273)); +#30961 = CARTESIAN_POINT('',(0.155472050986,0.272727272727)); +#30962 = CARTESIAN_POINT('',(0.153875620797,0.318181818182)); +#30963 = CARTESIAN_POINT('',(0.15227678393,0.363636363636)); +#30964 = CARTESIAN_POINT('',(0.15067553494,0.409090909091)); +#30965 = CARTESIAN_POINT('',(0.149071868364,0.454545454545)); +#30966 = CARTESIAN_POINT('',(0.147465778721,0.5)); +#30967 = CARTESIAN_POINT('',(0.145857260518,0.545454545455)); +#30968 = CARTESIAN_POINT('',(0.14424630824,0.590909090909)); +#30969 = CARTESIAN_POINT('',(0.142632916359,0.636363636364)); +#30970 = CARTESIAN_POINT('',(0.141017079328,0.681818181818)); +#30971 = CARTESIAN_POINT('',(0.139398791586,0.727272727273)); +#30972 = CARTESIAN_POINT('',(0.137778047552,0.772727272727)); +#30973 = CARTESIAN_POINT('',(0.13615484163,0.818181818182)); +#30974 = CARTESIAN_POINT('',(0.134529168206,0.863636363636)); +#30975 = CARTESIAN_POINT('',(0.132901021649,0.909090909091)); +#30976 = CARTESIAN_POINT('',(0.131270396313,0.954545454545)); +#30977 = CARTESIAN_POINT('',(0.130181656456,0.984848484848)); +#30978 = CARTESIAN_POINT('',(0.129636871508,1.)); +#30979 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#30980 = ADVANCED_FACE('',(#30981),#30193,.T.); +#30981 = FACE_BOUND('',#30982,.T.); +#30982 = EDGE_LOOP('',(#30983,#30984,#30985,#30986)); +#30983 = ORIENTED_EDGE('',*,*,#30176,.T.); +#30984 = ORIENTED_EDGE('',*,*,#30838,.T.); +#30985 = ORIENTED_EDGE('',*,*,#30409,.F.); +#30986 = ORIENTED_EDGE('',*,*,#30987,.F.); +#30987 = EDGE_CURVE('',#30149,#30387,#30988,.T.); +#30988 = SURFACE_CURVE('',#30989,(#30993,#31000),.PCURVE_S1.); +#30989 = LINE('',#30990,#30991); +#30990 = CARTESIAN_POINT('',(2.55,2.11,0.725)); +#30991 = VECTOR('',#30992,1.); +#30992 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#30993 = PCURVE('',#30193,#30994); +#30994 = DEFINITIONAL_REPRESENTATION('',(#30995),#30999); +#30995 = LINE('',#30996,#30997); +#30996 = CARTESIAN_POINT('',(6.28318530718,0.)); +#30997 = VECTOR('',#30998,1.); +#30998 = DIRECTION('',(0.,-1.)); +#30999 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31000 = PCURVE('',#30164,#31001); +#31001 = DEFINITIONAL_REPRESENTATION('',(#31002),#31006); +#31002 = LINE('',#31003,#31004); +#31003 = CARTESIAN_POINT('',(0.425,0.)); +#31004 = VECTOR('',#31005,1.); +#31005 = DIRECTION('',(0.,-1.)); +#31006 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31007 = ADVANCED_FACE('',(#31008),#30164,.F.); +#31008 = FACE_BOUND('',#31009,.F.); +#31009 = EDGE_LOOP('',(#31010,#31031,#31032,#31033)); +#31010 = ORIENTED_EDGE('',*,*,#31011,.T.); +#31011 = EDGE_CURVE('',#30116,#30359,#31012,.T.); +#31012 = SURFACE_CURVE('',#31013,(#31017,#31024),.PCURVE_S1.); +#31013 = LINE('',#31014,#31015); +#31014 = CARTESIAN_POINT('',(2.55,2.11,0.3)); +#31015 = VECTOR('',#31016,1.); +#31016 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#31017 = PCURVE('',#30164,#31018); +#31018 = DEFINITIONAL_REPRESENTATION('',(#31019),#31023); +#31019 = LINE('',#31020,#31021); +#31020 = CARTESIAN_POINT('',(0.,0.)); +#31021 = VECTOR('',#31022,1.); +#31022 = DIRECTION('',(0.,-1.)); +#31023 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31024 = PCURVE('',#30136,#31025); +#31025 = DEFINITIONAL_REPRESENTATION('',(#31026),#31030); +#31026 = LINE('',#31027,#31028); +#31027 = CARTESIAN_POINT('',(1.570796326795,0.)); +#31028 = VECTOR('',#31029,1.); +#31029 = DIRECTION('',(0.,-1.)); +#31030 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31031 = ORIENTED_EDGE('',*,*,#30386,.T.); +#31032 = ORIENTED_EDGE('',*,*,#30987,.F.); +#31033 = ORIENTED_EDGE('',*,*,#30148,.F.); +#31034 = ADVANCED_FACE('',(#31035),#30136,.F.); +#31035 = FACE_BOUND('',#31036,.F.); +#31036 = EDGE_LOOP('',(#31037,#31058,#31059,#31060)); +#31037 = ORIENTED_EDGE('',*,*,#31038,.T.); +#31038 = EDGE_CURVE('',#30088,#30336,#31039,.T.); +#31039 = SURFACE_CURVE('',#31040,(#31044,#31051),.PCURVE_S1.); +#31040 = LINE('',#31041,#31042); +#31041 = CARTESIAN_POINT('',(2.65,2.11,0.2)); +#31042 = VECTOR('',#31043,1.); +#31043 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#31044 = PCURVE('',#30136,#31045); +#31045 = DEFINITIONAL_REPRESENTATION('',(#31046),#31050); +#31046 = LINE('',#31047,#31048); +#31047 = CARTESIAN_POINT('',(0.,0.)); +#31048 = VECTOR('',#31049,1.); +#31049 = DIRECTION('',(0.,-1.)); +#31050 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31051 = PCURVE('',#30103,#31052); +#31052 = DEFINITIONAL_REPRESENTATION('',(#31053),#31057); +#31053 = LINE('',#31054,#31055); +#31054 = CARTESIAN_POINT('',(0.35,7.771561172375E-17)); +#31055 = VECTOR('',#31056,1.); +#31056 = DIRECTION('',(0.,-1.)); +#31057 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31058 = ORIENTED_EDGE('',*,*,#30358,.T.); +#31059 = ORIENTED_EDGE('',*,*,#31011,.F.); +#31060 = ORIENTED_EDGE('',*,*,#30115,.F.); +#31061 = ADVANCED_FACE('',(#31062),#30103,.F.); +#31062 = FACE_BOUND('',#31063,.F.); +#31063 = EDGE_LOOP('',(#31064,#31085,#31086,#31087)); +#31064 = ORIENTED_EDGE('',*,*,#31065,.T.); +#31065 = EDGE_CURVE('',#30060,#30313,#31066,.T.); +#31066 = SURFACE_CURVE('',#31067,(#31071,#31078),.PCURVE_S1.); +#31067 = LINE('',#31068,#31069); +#31068 = CARTESIAN_POINT('',(3.,2.11,0.2)); +#31069 = VECTOR('',#31070,1.); +#31070 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#31071 = PCURVE('',#30103,#31072); +#31072 = DEFINITIONAL_REPRESENTATION('',(#31073),#31077); +#31073 = LINE('',#31074,#31075); +#31074 = CARTESIAN_POINT('',(-0.,0.)); +#31075 = VECTOR('',#31076,1.); +#31076 = DIRECTION('',(0.,-1.)); +#31077 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31078 = PCURVE('',#30075,#31079); +#31079 = DEFINITIONAL_REPRESENTATION('',(#31080),#31084); +#31080 = LINE('',#31081,#31082); +#31081 = CARTESIAN_POINT('',(0.2,0.)); +#31082 = VECTOR('',#31083,1.); +#31083 = DIRECTION('',(0.,-1.)); +#31084 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31085 = ORIENTED_EDGE('',*,*,#30335,.T.); +#31086 = ORIENTED_EDGE('',*,*,#31038,.F.); +#31087 = ORIENTED_EDGE('',*,*,#30087,.F.); +#31088 = ADVANCED_FACE('',(#31089),#30075,.F.); +#31089 = FACE_BOUND('',#31090,.F.); +#31090 = EDGE_LOOP('',(#31091,#31112,#31113,#31114)); +#31091 = ORIENTED_EDGE('',*,*,#31092,.T.); +#31092 = EDGE_CURVE('',#30032,#30290,#31093,.T.); +#31093 = SURFACE_CURVE('',#31094,(#31098,#31105),.PCURVE_S1.); +#31094 = LINE('',#31095,#31096); +#31095 = CARTESIAN_POINT('',(3.,2.11,5.551115123126E-17)); +#31096 = VECTOR('',#31097,1.); +#31097 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#31098 = PCURVE('',#30075,#31099); +#31099 = DEFINITIONAL_REPRESENTATION('',(#31100),#31104); +#31100 = LINE('',#31101,#31102); +#31101 = CARTESIAN_POINT('',(0.,0.)); +#31102 = VECTOR('',#31103,1.); +#31103 = DIRECTION('',(0.,-1.)); +#31104 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31105 = PCURVE('',#30047,#31106); +#31106 = DEFINITIONAL_REPRESENTATION('',(#31107),#31111); +#31107 = LINE('',#31108,#31109); +#31108 = CARTESIAN_POINT('',(0.35,-7.771561172375E-17)); +#31109 = VECTOR('',#31110,1.); +#31110 = DIRECTION('',(0.,-1.)); +#31111 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31112 = ORIENTED_EDGE('',*,*,#30312,.T.); +#31113 = ORIENTED_EDGE('',*,*,#31065,.F.); +#31114 = ORIENTED_EDGE('',*,*,#30059,.F.); +#31115 = ADVANCED_FACE('',(#31116),#30047,.F.); +#31116 = FACE_BOUND('',#31117,.F.); +#31117 = EDGE_LOOP('',(#31118,#31119,#31120,#31121)); +#31118 = ORIENTED_EDGE('',*,*,#30755,.T.); +#31119 = ORIENTED_EDGE('',*,*,#30289,.T.); +#31120 = ORIENTED_EDGE('',*,*,#31092,.F.); +#31121 = ORIENTED_EDGE('',*,*,#30031,.F.); +#31122 = ADVANCED_FACE('',(#31123),#30250,.F.); +#31123 = FACE_BOUND('',#31124,.F.); +#31124 = EDGE_LOOP('',(#31125,#31126,#31127,#31155)); +#31125 = ORIENTED_EDGE('',*,*,#30234,.F.); +#31126 = ORIENTED_EDGE('',*,*,#30681,.T.); +#31127 = ORIENTED_EDGE('',*,*,#31128,.T.); +#31128 = EDGE_CURVE('',#30654,#31129,#31131,.T.); +#31129 = VERTEX_POINT('',#31130); +#31130 = CARTESIAN_POINT('',(1.95,0.84,1.025)); +#31131 = SURFACE_CURVE('',#31132,(#31136,#31143),.PCURVE_S1.); +#31132 = LINE('',#31133,#31134); +#31133 = CARTESIAN_POINT('',(1.95,0.84,0.778829828783)); +#31134 = VECTOR('',#31135,1.); +#31135 = DIRECTION('',(0.,0.,1.)); +#31136 = PCURVE('',#30250,#31137); +#31137 = DEFINITIONAL_REPRESENTATION('',(#31138),#31142); +#31138 = LINE('',#31139,#31140); +#31139 = CARTESIAN_POINT('',(1.435,-0.246170171217)); +#31140 = VECTOR('',#31141,1.); +#31141 = DIRECTION('',(0.,1.)); +#31142 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31143 = PCURVE('',#31144,#31149); +#31144 = PLANE('',#31145); +#31145 = AXIS2_PLACEMENT_3D('',#31146,#31147,#31148); +#31146 = CARTESIAN_POINT('',(2.41578967201,0.84,0.532659657565)); +#31147 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#31148 = DIRECTION('',(0.,0.,1.)); +#31149 = DEFINITIONAL_REPRESENTATION('',(#31150),#31154); +#31150 = LINE('',#31151,#31152); +#31151 = CARTESIAN_POINT('',(0.246170171218,0.46578967201)); +#31152 = VECTOR('',#31153,1.); +#31153 = DIRECTION('',(1.,0.)); +#31154 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31155 = ORIENTED_EDGE('',*,*,#31156,.F.); +#31156 = EDGE_CURVE('',#30235,#31129,#31157,.T.); +#31157 = SURFACE_CURVE('',#31158,(#31162,#31169),.PCURVE_S1.); +#31158 = LINE('',#31159,#31160); +#31159 = CARTESIAN_POINT('',(1.95,2.275,1.025)); +#31160 = VECTOR('',#31161,1.); +#31161 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#31162 = PCURVE('',#30250,#31163); +#31163 = DEFINITIONAL_REPRESENTATION('',(#31164),#31168); +#31164 = LINE('',#31165,#31166); +#31165 = CARTESIAN_POINT('',(0.,0.)); +#31166 = VECTOR('',#31167,1.); +#31167 = DIRECTION('',(1.,0.)); +#31168 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31169 = PCURVE('',#30876,#31170); +#31170 = DEFINITIONAL_REPRESENTATION('',(#31171),#31175); +#31171 = LINE('',#31172,#31173); +#31172 = CARTESIAN_POINT('',(-1.110223024625E-16,1.787388845424E-15)); +#31173 = VECTOR('',#31174,1.); +#31174 = DIRECTION('',(1.,-3.108502339868E-15)); +#31175 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31176 = ADVANCED_FACE('',(#31177),#30474,.F.); +#31177 = FACE_BOUND('',#31178,.F.); +#31178 = EDGE_LOOP('',(#31179,#31208,#31235,#31262,#31289,#31309,#31310, + #31332)); +#31179 = ORIENTED_EDGE('',*,*,#31180,.F.); +#31180 = EDGE_CURVE('',#31181,#31183,#31185,.T.); +#31181 = VERTEX_POINT('',#31182); +#31182 = CARTESIAN_POINT('',(-1.835171280765,2.217585640382,0.1)); +#31183 = VERTEX_POINT('',#31184); +#31184 = CARTESIAN_POINT('',(-1.717585640382,2.335171280765,0.1)); +#31185 = SURFACE_CURVE('',#31186,(#31190,#31197),.PCURVE_S1.); +#31186 = LINE('',#31187,#31188); +#31187 = CARTESIAN_POINT('',(-1.835171280765,2.217585640382,0.1)); +#31188 = VECTOR('',#31189,1.); +#31189 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#31190 = PCURVE('',#30474,#31191); +#31191 = DEFINITIONAL_REPRESENTATION('',(#31192),#31196); +#31192 = LINE('',#31193,#31194); +#31193 = CARTESIAN_POINT('',(2.505134554812E-02,-0.164393417553)); +#31194 = VECTOR('',#31195,1.); +#31195 = DIRECTION('',(-0.150647445192,0.98858755164)); +#31196 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31197 = PCURVE('',#31198,#31203); +#31198 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#31199,#31200) + ,(#31201,#31202 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#31199 = CARTESIAN_POINT('',(-1.835171280765,2.217585640382,0.1)); +#31200 = CARTESIAN_POINT('',(-1.95,2.275,0.825)); +#31201 = CARTESIAN_POINT('',(-1.717585640382,2.335171280765,0.1)); +#31202 = CARTESIAN_POINT('',(-1.775,2.45,0.825)); +#31203 = DEFINITIONAL_REPRESENTATION('',(#31204),#31207); +#31204 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#31205,#31206),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,0.16629120737),.PIECEWISE_BEZIER_KNOTS.); +#31205 = CARTESIAN_POINT('',(2.992756715082E-16,-4.171445780772E-17)); +#31206 = CARTESIAN_POINT('',(0.247487373415,2.905068403533E-17)); +#31207 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31208 = ORIENTED_EDGE('',*,*,#31209,.F.); +#31209 = EDGE_CURVE('',#31210,#31181,#31212,.T.); +#31210 = VERTEX_POINT('',#31211); +#31211 = CARTESIAN_POINT('',(-1.835171280765,-2.217585640382,0.1)); +#31212 = SURFACE_CURVE('',#31213,(#31217,#31224),.PCURVE_S1.); +#31213 = LINE('',#31214,#31215); +#31214 = CARTESIAN_POINT('',(-1.835171280765,-2.217585640382,0.1)); +#31215 = VECTOR('',#31216,1.); +#31216 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#31217 = PCURVE('',#30474,#31218); +#31218 = DEFINITIONAL_REPRESENTATION('',(#31219),#31223); +#31219 = LINE('',#31220,#31221); +#31220 = CARTESIAN_POINT('',(3.597851433471,-2.792290641847)); +#31221 = VECTOR('',#31222,1.); +#31222 = DIRECTION('',(-0.805560791625,0.592513131498)); +#31223 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31224 = PCURVE('',#31225,#31230); +#31225 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#31226,#31227) + ,(#31228,#31229 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.55),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#31226 = CARTESIAN_POINT('',(-1.835171280765,-2.217585640382,0.1)); +#31227 = CARTESIAN_POINT('',(-1.95,-2.275,0.825)); +#31228 = CARTESIAN_POINT('',(-1.835171280765,2.217585640382,0.1)); +#31229 = CARTESIAN_POINT('',(-1.95,2.275,0.825)); +#31230 = DEFINITIONAL_REPRESENTATION('',(#31231),#31234); +#31231 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#31232,#31233),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,4.435171280764),.PIECEWISE_BEZIER_KNOTS.); +#31232 = CARTESIAN_POINT('',(-4.94827695417E-16,-2.662846262169E-17)); +#31233 = CARTESIAN_POINT('',(4.55,1.773999406632E-16)); +#31234 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31235 = ORIENTED_EDGE('',*,*,#31236,.F.); +#31236 = EDGE_CURVE('',#31237,#31210,#31239,.T.); +#31237 = VERTEX_POINT('',#31238); +#31238 = CARTESIAN_POINT('',(-1.717585640382,-2.335171280765,0.1)); +#31239 = SURFACE_CURVE('',#31240,(#31244,#31251),.PCURVE_S1.); +#31240 = LINE('',#31241,#31242); +#31241 = CARTESIAN_POINT('',(-1.717585640382,-2.335171280765,0.1)); +#31242 = VECTOR('',#31243,1.); +#31243 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#31244 = PCURVE('',#30474,#31245); +#31245 = DEFINITIONAL_REPRESENTATION('',(#31246),#31250); +#31246 = LINE('',#31247,#31248); +#31247 = CARTESIAN_POINT('',(3.762244851024,-2.767239296299)); +#31248 = VECTOR('',#31249,1.); +#31249 = DIRECTION('',(-0.98858755164,-0.150647445192)); +#31250 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31251 = PCURVE('',#31252,#31257); +#31252 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#31253,#31254) + ,(#31255,#31256 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#31253 = CARTESIAN_POINT('',(-1.717585640382,-2.335171280765,0.1)); +#31254 = CARTESIAN_POINT('',(-1.775,-2.45,0.825)); +#31255 = CARTESIAN_POINT('',(-1.835171280765,-2.217585640382,0.1)); +#31256 = CARTESIAN_POINT('',(-1.95,-2.275,0.825)); +#31257 = DEFINITIONAL_REPRESENTATION('',(#31258),#31261); +#31258 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#31259,#31260),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,0.16629120737),.PIECEWISE_BEZIER_KNOTS.); +#31259 = CARTESIAN_POINT('',(-6.316502332661E-16,2.905068403496E-17)); +#31260 = CARTESIAN_POINT('',(0.247487373415,-4.171445780772E-17)); +#31261 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31262 = ORIENTED_EDGE('',*,*,#31263,.F.); +#31263 = EDGE_CURVE('',#31264,#31237,#31266,.T.); +#31264 = VERTEX_POINT('',#31265); +#31265 = CARTESIAN_POINT('',(1.717585640382,-2.335171280765,0.1)); +#31266 = SURFACE_CURVE('',#31267,(#31271,#31278),.PCURVE_S1.); +#31267 = LINE('',#31268,#31269); +#31268 = CARTESIAN_POINT('',(1.717585640382,-2.335171280765,0.1)); +#31269 = VECTOR('',#31270,1.); +#31270 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#31271 = PCURVE('',#30474,#31272); +#31272 = DEFINITIONAL_REPRESENTATION('',(#31273),#31277); +#31273 = LINE('',#31274,#31275); +#31274 = CARTESIAN_POINT('',(5.79762894382,-8.180123245438E-13)); +#31275 = VECTOR('',#31276,1.); +#31276 = DIRECTION('',(-0.592513131498,-0.805560791625)); +#31277 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31278 = PCURVE('',#31279,#31284); +#31279 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#31280,#31281) + ,(#31282,#31283 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.55),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#31280 = CARTESIAN_POINT('',(1.717585640382,-2.335171280765,0.1)); +#31281 = CARTESIAN_POINT('',(1.775,-2.45,0.825)); +#31282 = CARTESIAN_POINT('',(-1.717585640382,-2.335171280765,0.1)); +#31283 = CARTESIAN_POINT('',(-1.775,-2.45,0.825)); +#31284 = DEFINITIONAL_REPRESENTATION('',(#31285),#31288); +#31285 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#31286,#31287),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,3.435171280764),.PIECEWISE_BEZIER_KNOTS.); +#31286 = CARTESIAN_POINT('',(2.867682730149E-16,-3.386432460304E-17)); +#31287 = CARTESIAN_POINT('',(3.55,1.579746795886E-16)); +#31288 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31289 = ORIENTED_EDGE('',*,*,#31290,.F.); +#31290 = EDGE_CURVE('',#30460,#31264,#31291,.T.); +#31291 = SURFACE_CURVE('',#31292,(#31296,#31303),.PCURVE_S1.); +#31292 = LINE('',#31293,#31294); +#31293 = CARTESIAN_POINT('',(1.835171280765,-2.217585640382,0.1)); +#31294 = VECTOR('',#31295,1.); +#31295 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#31296 = PCURVE('',#30474,#31297); +#31297 = DEFINITIONAL_REPRESENTATION('',(#31298),#31302); +#31298 = LINE('',#31299,#31300); +#31299 = CARTESIAN_POINT('',(5.772577598272,0.164393417552)); +#31300 = VECTOR('',#31301,1.); +#31301 = DIRECTION('',(0.150647445192,-0.98858755164)); +#31302 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31303 = PCURVE('',#30501,#31304); +#31304 = DEFINITIONAL_REPRESENTATION('',(#31305),#31308); +#31305 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#31306,#31307),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,0.16629120737),.PIECEWISE_BEZIER_KNOTS.); +#31306 = CARTESIAN_POINT('',(2.992756715082E-16,-4.171445780772E-17)); +#31307 = CARTESIAN_POINT('',(0.247487373415,2.905068403533E-17)); +#31308 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31309 = ORIENTED_EDGE('',*,*,#30457,.F.); +#31310 = ORIENTED_EDGE('',*,*,#31311,.F.); +#31311 = EDGE_CURVE('',#31312,#30458,#31314,.T.); +#31312 = VERTEX_POINT('',#31313); +#31313 = CARTESIAN_POINT('',(1.717585640382,2.335171280765,0.1)); +#31314 = SURFACE_CURVE('',#31315,(#31319,#31326),.PCURVE_S1.); +#31315 = LINE('',#31316,#31317); +#31316 = CARTESIAN_POINT('',(1.717585640382,2.335171280765,0.1)); +#31317 = VECTOR('',#31318,1.); +#31318 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#31319 = PCURVE('',#30474,#31320); +#31320 = DEFINITIONAL_REPRESENTATION('',(#31321),#31325); +#31321 = LINE('',#31322,#31323); +#31322 = CARTESIAN_POINT('',(2.035384092796,2.767239296298)); +#31323 = VECTOR('',#31324,1.); +#31324 = DIRECTION('',(0.98858755164,0.150647445192)); +#31325 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31326 = PCURVE('',#30739,#31327); +#31327 = DEFINITIONAL_REPRESENTATION('',(#31328),#31331); +#31328 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#31329,#31330),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,0.16629120737),.PIECEWISE_BEZIER_KNOTS.); +#31329 = CARTESIAN_POINT('',(-6.316502332661E-16,2.905068403496E-17)); +#31330 = CARTESIAN_POINT('',(0.247487373415,-4.171445780772E-17)); +#31331 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31332 = ORIENTED_EDGE('',*,*,#31333,.F.); +#31333 = EDGE_CURVE('',#31183,#31312,#31334,.T.); +#31334 = SURFACE_CURVE('',#31335,(#31339,#31346),.PCURVE_S1.); +#31335 = LINE('',#31336,#31337); +#31336 = CARTESIAN_POINT('',(-1.717585640382,2.335171280765,0.1)); +#31337 = VECTOR('',#31338,1.); +#31338 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#31339 = PCURVE('',#30474,#31340); +#31340 = DEFINITIONAL_REPRESENTATION('',(#31341),#31345); +#31341 = LINE('',#31342,#31343); +#31342 = CARTESIAN_POINT('',(0.,0.)); +#31343 = VECTOR('',#31344,1.); +#31344 = DIRECTION('',(0.592513131498,0.805560791625)); +#31345 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31346 = PCURVE('',#31347,#31352); +#31347 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#31348,#31349) + ,(#31350,#31351 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.55),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#31348 = CARTESIAN_POINT('',(-1.717585640382,2.335171280765,0.1)); +#31349 = CARTESIAN_POINT('',(-1.775,2.45,0.825)); +#31350 = CARTESIAN_POINT('',(1.717585640382,2.335171280765,0.1)); +#31351 = CARTESIAN_POINT('',(1.775,2.45,0.825)); +#31352 = DEFINITIONAL_REPRESENTATION('',(#31353),#31356); +#31353 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#31354,#31355),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,3.435171280764),.PIECEWISE_BEZIER_KNOTS.); +#31354 = CARTESIAN_POINT('',(2.867682730149E-16,-3.386432460304E-17)); +#31355 = CARTESIAN_POINT('',(3.55,1.579746795886E-16)); +#31356 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31357 = ADVANCED_FACE('',(#31358),#30739,.F.); +#31358 = FACE_BOUND('',#31359,.F.); +#31359 = EDGE_LOOP('',(#31360,#31361,#31362,#31385)); +#31360 = ORIENTED_EDGE('',*,*,#31311,.T.); +#31361 = ORIENTED_EDGE('',*,*,#30726,.T.); +#31362 = ORIENTED_EDGE('',*,*,#31363,.F.); +#31363 = EDGE_CURVE('',#31364,#30704,#31366,.T.); +#31364 = VERTEX_POINT('',#31365); +#31365 = CARTESIAN_POINT('',(1.775,2.45,0.825)); +#31366 = SURFACE_CURVE('',#31367,(#31371,#31378),.PCURVE_S1.); +#31367 = LINE('',#31368,#31369); +#31368 = CARTESIAN_POINT('',(1.775,2.45,0.825)); +#31369 = VECTOR('',#31370,1.); +#31370 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#31371 = PCURVE('',#30739,#31372); +#31372 = DEFINITIONAL_REPRESENTATION('',(#31373),#31377); +#31373 = LINE('',#31374,#31375); +#31374 = CARTESIAN_POINT('',(5.057693122531E-17,1.)); +#31375 = VECTOR('',#31376,1.); +#31376 = DIRECTION('',(1.,0.)); +#31377 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31378 = PCURVE('',#30795,#31379); +#31379 = DEFINITIONAL_REPRESENTATION('',(#31380),#31384); +#31380 = LINE('',#31381,#31382); +#31381 = CARTESIAN_POINT('',(0.,-0.2)); +#31382 = VECTOR('',#31383,1.); +#31383 = DIRECTION('',(1.,0.)); +#31384 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31385 = ORIENTED_EDGE('',*,*,#31386,.F.); +#31386 = EDGE_CURVE('',#31312,#31364,#31387,.T.); +#31387 = SURFACE_CURVE('',#31388,(#31391,#31398),.PCURVE_S1.); +#31388 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#31389,#31390),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#31389 = CARTESIAN_POINT('',(1.717585640382,2.335171280765,0.1)); +#31390 = CARTESIAN_POINT('',(1.775,2.45,0.825)); +#31391 = PCURVE('',#30739,#31392); +#31392 = DEFINITIONAL_REPRESENTATION('',(#31393),#31397); +#31393 = LINE('',#31394,#31395); +#31394 = CARTESIAN_POINT('',(-6.316502332661E-16,2.905068403496E-17)); +#31395 = VECTOR('',#31396,1.); +#31396 = DIRECTION('',(3.710816018575E-16,1.)); +#31397 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31398 = PCURVE('',#31347,#31399); +#31399 = DEFINITIONAL_REPRESENTATION('',(#31400),#31404); +#31400 = LINE('',#31401,#31402); +#31401 = CARTESIAN_POINT('',(3.55,-1.234009040003E-16)); +#31402 = VECTOR('',#31403,1.); +#31403 = DIRECTION('',(0.,1.)); +#31404 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31405 = ADVANCED_FACE('',(#31406),#30501,.F.); +#31406 = FACE_BOUND('',#31407,.F.); +#31407 = EDGE_LOOP('',(#31408,#31409,#31431,#31457)); +#31408 = ORIENTED_EDGE('',*,*,#31290,.T.); +#31409 = ORIENTED_EDGE('',*,*,#31410,.T.); +#31410 = EDGE_CURVE('',#31264,#31411,#31413,.T.); +#31411 = VERTEX_POINT('',#31412); +#31412 = CARTESIAN_POINT('',(1.775,-2.45,0.825)); +#31413 = SURFACE_CURVE('',#31414,(#31417,#31424),.PCURVE_S1.); +#31414 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#31415,#31416),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#31415 = CARTESIAN_POINT('',(1.717585640382,-2.335171280765,0.1)); +#31416 = CARTESIAN_POINT('',(1.775,-2.45,0.825)); +#31417 = PCURVE('',#30501,#31418); +#31418 = DEFINITIONAL_REPRESENTATION('',(#31419),#31423); +#31419 = LINE('',#31420,#31421); +#31420 = CARTESIAN_POINT('',(0.247487373415,-1.18030267204E-16)); +#31421 = VECTOR('',#31422,1.); +#31422 = DIRECTION('',(1.110223024625E-16,1.)); +#31423 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31424 = PCURVE('',#31279,#31425); +#31425 = DEFINITIONAL_REPRESENTATION('',(#31426),#31430); +#31426 = LINE('',#31427,#31428); +#31427 = CARTESIAN_POINT('',(2.867682730149E-16,-3.386432460304E-17)); +#31428 = VECTOR('',#31429,1.); +#31429 = DIRECTION('',(-2.650018708623E-16,1.)); +#31430 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31431 = ORIENTED_EDGE('',*,*,#31432,.F.); +#31432 = EDGE_CURVE('',#30487,#31411,#31433,.T.); +#31433 = SURFACE_CURVE('',#31434,(#31438,#31445),.PCURVE_S1.); +#31434 = LINE('',#31435,#31436); +#31435 = CARTESIAN_POINT('',(1.95,-2.275,0.825)); +#31436 = VECTOR('',#31437,1.); +#31437 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#31438 = PCURVE('',#30501,#31439); +#31439 = DEFINITIONAL_REPRESENTATION('',(#31440),#31444); +#31440 = LINE('',#31441,#31442); +#31441 = CARTESIAN_POINT('',(-1.061963552289E-16,1.)); +#31442 = VECTOR('',#31443,1.); +#31443 = DIRECTION('',(1.,0.)); +#31444 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31445 = PCURVE('',#31446,#31451); +#31446 = PLANE('',#31447); +#31447 = AXIS2_PLACEMENT_3D('',#31448,#31449,#31450); +#31448 = CARTESIAN_POINT('',(1.95,-2.275,1.025)); +#31449 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#31450 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#31451 = DEFINITIONAL_REPRESENTATION('',(#31452),#31456); +#31452 = LINE('',#31453,#31454); +#31453 = CARTESIAN_POINT('',(-0.,-0.2)); +#31454 = VECTOR('',#31455,1.); +#31455 = DIRECTION('',(1.,0.)); +#31456 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31457 = ORIENTED_EDGE('',*,*,#30486,.F.); +#31458 = ADVANCED_FACE('',(#31459),#30529,.F.); +#31459 = FACE_BOUND('',#31460,.F.); +#31460 = EDGE_LOOP('',(#31461,#31489,#31490,#31510)); +#31461 = ORIENTED_EDGE('',*,*,#31462,.F.); +#31462 = EDGE_CURVE('',#30514,#31463,#31465,.T.); +#31463 = VERTEX_POINT('',#31464); +#31464 = CARTESIAN_POINT('',(1.95,-2.11,1.025)); +#31465 = SURFACE_CURVE('',#31466,(#31470,#31477),.PCURVE_S1.); +#31466 = LINE('',#31467,#31468); +#31467 = CARTESIAN_POINT('',(1.95,-2.11,0.778829828783)); +#31468 = VECTOR('',#31469,1.); +#31469 = DIRECTION('',(0.,0.,1.)); +#31470 = PCURVE('',#30529,#31471); +#31471 = DEFINITIONAL_REPRESENTATION('',(#31472),#31476); +#31472 = LINE('',#31473,#31474); +#31473 = CARTESIAN_POINT('',(4.385,-0.246170171217)); +#31474 = VECTOR('',#31475,1.); +#31475 = DIRECTION('',(0.,1.)); +#31476 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31477 = PCURVE('',#31478,#31483); +#31478 = PLANE('',#31479); +#31479 = AXIS2_PLACEMENT_3D('',#31480,#31481,#31482); +#31480 = CARTESIAN_POINT('',(2.41578967201,-2.11,0.532659657565)); +#31481 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#31482 = DIRECTION('',(0.,0.,1.)); +#31483 = DEFINITIONAL_REPRESENTATION('',(#31484),#31488); +#31484 = LINE('',#31485,#31486); +#31485 = CARTESIAN_POINT('',(0.246170171218,0.46578967201)); +#31486 = VECTOR('',#31487,1.); +#31487 = DIRECTION('',(1.,0.)); +#31488 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31489 = ORIENTED_EDGE('',*,*,#30513,.T.); +#31490 = ORIENTED_EDGE('',*,*,#31491,.T.); +#31491 = EDGE_CURVE('',#30487,#31492,#31494,.T.); +#31492 = VERTEX_POINT('',#31493); +#31493 = CARTESIAN_POINT('',(1.95,-2.275,1.025)); +#31494 = SURFACE_CURVE('',#31495,(#31498,#31504),.PCURVE_S1.); +#31495 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#31496,#31497),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#31496 = CARTESIAN_POINT('',(1.95,-2.275,0.825)); +#31497 = CARTESIAN_POINT('',(1.95,-2.275,1.025)); +#31498 = PCURVE('',#30529,#31499); +#31499 = DEFINITIONAL_REPRESENTATION('',(#31500),#31503); +#31500 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#31501,#31502),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#31501 = CARTESIAN_POINT('',(4.55,-0.2)); +#31502 = CARTESIAN_POINT('',(4.55,0.)); +#31503 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31504 = PCURVE('',#31446,#31505); +#31505 = DEFINITIONAL_REPRESENTATION('',(#31506),#31509); +#31506 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#31507,#31508),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#31507 = CARTESIAN_POINT('',(0.,-0.2)); +#31508 = CARTESIAN_POINT('',(0.,0.)); +#31509 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31510 = ORIENTED_EDGE('',*,*,#31511,.F.); +#31511 = EDGE_CURVE('',#31463,#31492,#31512,.T.); +#31512 = SURFACE_CURVE('',#31513,(#31517,#31524),.PCURVE_S1.); +#31513 = LINE('',#31514,#31515); +#31514 = CARTESIAN_POINT('',(1.95,2.275,1.025)); +#31515 = VECTOR('',#31516,1.); +#31516 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#31517 = PCURVE('',#30529,#31518); +#31518 = DEFINITIONAL_REPRESENTATION('',(#31519),#31523); +#31519 = LINE('',#31520,#31521); +#31520 = CARTESIAN_POINT('',(0.,0.)); +#31521 = VECTOR('',#31522,1.); +#31522 = DIRECTION('',(1.,0.)); +#31523 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31524 = PCURVE('',#31525,#31530); +#31525 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#31526,#31527) + ,(#31528,#31529 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.55),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#31526 = CARTESIAN_POINT('',(1.95,2.275,1.025)); +#31527 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#31528 = CARTESIAN_POINT('',(1.95,-2.275,1.025)); +#31529 = CARTESIAN_POINT('',(1.875,-2.2375,1.025)); +#31530 = DEFINITIONAL_REPRESENTATION('',(#31531),#31535); +#31531 = LINE('',#31532,#31533); +#31532 = CARTESIAN_POINT('',(8.881784197001E-16,1.308297669345E-13)); +#31533 = VECTOR('',#31534,1.); +#31534 = DIRECTION('',(1.,-3.186124313148E-14)); +#31535 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31536 = ADVANCED_FACE('',(#31537),#30557,.F.); +#31537 = FACE_BOUND('',#31538,.F.); +#31538 = EDGE_LOOP('',(#31539,#31567,#31568,#31591)); +#31539 = ORIENTED_EDGE('',*,*,#31540,.F.); +#31540 = EDGE_CURVE('',#30542,#31541,#31543,.T.); +#31541 = VERTEX_POINT('',#31542); +#31542 = CARTESIAN_POINT('',(2.25,-1.7,0.825)); +#31543 = SURFACE_CURVE('',#31544,(#31548,#31555),.PCURVE_S1.); +#31544 = LINE('',#31545,#31546); +#31545 = CARTESIAN_POINT('',(1.8,-1.7,0.825)); +#31546 = VECTOR('',#31547,1.); +#31547 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#31548 = PCURVE('',#30557,#31549); +#31549 = DEFINITIONAL_REPRESENTATION('',(#31550),#31554); +#31550 = LINE('',#31551,#31552); +#31551 = CARTESIAN_POINT('',(0.,0.)); +#31552 = VECTOR('',#31553,1.); +#31553 = DIRECTION('',(1.,0.)); +#31554 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31555 = PCURVE('',#31556,#31561); +#31556 = PLANE('',#31557); +#31557 = AXIS2_PLACEMENT_3D('',#31558,#31559,#31560); +#31558 = CARTESIAN_POINT('',(2.41578967201,-1.7,0.532659657565)); +#31559 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#31560 = DIRECTION('',(0.,0.,1.)); +#31561 = DEFINITIONAL_REPRESENTATION('',(#31562),#31566); +#31562 = LINE('',#31563,#31564); +#31563 = CARTESIAN_POINT('',(0.292340342435,0.61578967201)); +#31564 = VECTOR('',#31565,1.); +#31565 = DIRECTION('',(0.,-1.)); +#31566 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31567 = ORIENTED_EDGE('',*,*,#30541,.T.); +#31568 = ORIENTED_EDGE('',*,*,#31569,.T.); +#31569 = EDGE_CURVE('',#30514,#31570,#31572,.T.); +#31570 = VERTEX_POINT('',#31571); +#31571 = CARTESIAN_POINT('',(2.25,-2.11,0.825)); +#31572 = SURFACE_CURVE('',#31573,(#31577,#31584),.PCURVE_S1.); +#31573 = LINE('',#31574,#31575); +#31574 = CARTESIAN_POINT('',(1.8,-2.11,0.825)); +#31575 = VECTOR('',#31576,1.); +#31576 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#31577 = PCURVE('',#30557,#31578); +#31578 = DEFINITIONAL_REPRESENTATION('',(#31579),#31583); +#31579 = LINE('',#31580,#31581); +#31580 = CARTESIAN_POINT('',(-9.103828801925E-17,-0.41)); +#31581 = VECTOR('',#31582,1.); +#31582 = DIRECTION('',(1.,0.)); +#31583 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31584 = PCURVE('',#31478,#31585); +#31585 = DEFINITIONAL_REPRESENTATION('',(#31586),#31590); +#31586 = LINE('',#31587,#31588); +#31587 = CARTESIAN_POINT('',(0.292340342435,0.61578967201)); +#31588 = VECTOR('',#31589,1.); +#31589 = DIRECTION('',(0.,-1.)); +#31590 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31591 = ORIENTED_EDGE('',*,*,#31592,.F.); +#31592 = EDGE_CURVE('',#31541,#31570,#31593,.T.); +#31593 = SURFACE_CURVE('',#31594,(#31598,#31605),.PCURVE_S1.); +#31594 = LINE('',#31595,#31596); +#31595 = CARTESIAN_POINT('',(2.25,-1.7,0.825)); +#31596 = VECTOR('',#31597,1.); +#31597 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#31598 = PCURVE('',#30557,#31599); +#31599 = DEFINITIONAL_REPRESENTATION('',(#31600),#31604); +#31600 = LINE('',#31601,#31602); +#31601 = CARTESIAN_POINT('',(0.45,-9.992007221625E-17)); +#31602 = VECTOR('',#31603,1.); +#31603 = DIRECTION('',(0.,-1.)); +#31604 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31605 = PCURVE('',#31606,#31611); +#31606 = CYLINDRICAL_SURFACE('',#31607,0.1); +#31607 = AXIS2_PLACEMENT_3D('',#31608,#31609,#31610); +#31608 = CARTESIAN_POINT('',(2.25,-1.7,0.725)); +#31609 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#31610 = DIRECTION('',(4.440892098501E-15,9.860761315262E-31,1.)); +#31611 = DEFINITIONAL_REPRESENTATION('',(#31612),#31616); +#31612 = LINE('',#31613,#31614); +#31613 = CARTESIAN_POINT('',(0.,0.)); +#31614 = VECTOR('',#31615,1.); +#31615 = DIRECTION('',(0.,-1.)); +#31616 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31617 = ADVANCED_FACE('',(#31618),#30585,.F.); +#31618 = FACE_BOUND('',#31619,.F.); +#31619 = EDGE_LOOP('',(#31620,#31648,#31649,#31672)); +#31620 = ORIENTED_EDGE('',*,*,#31621,.F.); +#31621 = EDGE_CURVE('',#30570,#31622,#31624,.T.); +#31622 = VERTEX_POINT('',#31623); +#31623 = CARTESIAN_POINT('',(1.95,-0.84,1.025)); +#31624 = SURFACE_CURVE('',#31625,(#31629,#31636),.PCURVE_S1.); +#31625 = LINE('',#31626,#31627); +#31626 = CARTESIAN_POINT('',(1.95,-0.84,0.778829828783)); +#31627 = VECTOR('',#31628,1.); +#31628 = DIRECTION('',(0.,0.,1.)); +#31629 = PCURVE('',#30585,#31630); +#31630 = DEFINITIONAL_REPRESENTATION('',(#31631),#31635); +#31631 = LINE('',#31632,#31633); +#31632 = CARTESIAN_POINT('',(3.115,-0.246170171217)); +#31633 = VECTOR('',#31634,1.); +#31634 = DIRECTION('',(0.,1.)); +#31635 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31636 = PCURVE('',#31637,#31642); +#31637 = PLANE('',#31638); +#31638 = AXIS2_PLACEMENT_3D('',#31639,#31640,#31641); +#31639 = CARTESIAN_POINT('',(2.41578967201,-0.84,0.532659657565)); +#31640 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#31641 = DIRECTION('',(0.,0.,1.)); +#31642 = DEFINITIONAL_REPRESENTATION('',(#31643),#31647); +#31643 = LINE('',#31644,#31645); +#31644 = CARTESIAN_POINT('',(0.246170171218,0.46578967201)); +#31645 = VECTOR('',#31646,1.); +#31646 = DIRECTION('',(1.,0.)); +#31647 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31648 = ORIENTED_EDGE('',*,*,#30569,.T.); +#31649 = ORIENTED_EDGE('',*,*,#31650,.T.); +#31650 = EDGE_CURVE('',#30542,#31651,#31653,.T.); +#31651 = VERTEX_POINT('',#31652); +#31652 = CARTESIAN_POINT('',(1.95,-1.7,1.025)); +#31653 = SURFACE_CURVE('',#31654,(#31658,#31665),.PCURVE_S1.); +#31654 = LINE('',#31655,#31656); +#31655 = CARTESIAN_POINT('',(1.95,-1.7,0.778829828783)); +#31656 = VECTOR('',#31657,1.); +#31657 = DIRECTION('',(0.,0.,1.)); +#31658 = PCURVE('',#30585,#31659); +#31659 = DEFINITIONAL_REPRESENTATION('',(#31660),#31664); +#31660 = LINE('',#31661,#31662); +#31661 = CARTESIAN_POINT('',(3.975,-0.246170171217)); +#31662 = VECTOR('',#31663,1.); +#31663 = DIRECTION('',(0.,1.)); +#31664 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31665 = PCURVE('',#31556,#31666); +#31666 = DEFINITIONAL_REPRESENTATION('',(#31667),#31671); +#31667 = LINE('',#31668,#31669); +#31668 = CARTESIAN_POINT('',(0.246170171218,0.46578967201)); +#31669 = VECTOR('',#31670,1.); +#31670 = DIRECTION('',(1.,0.)); +#31671 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31672 = ORIENTED_EDGE('',*,*,#31673,.F.); +#31673 = EDGE_CURVE('',#31622,#31651,#31674,.T.); +#31674 = SURFACE_CURVE('',#31675,(#31679,#31686),.PCURVE_S1.); +#31675 = LINE('',#31676,#31677); +#31676 = CARTESIAN_POINT('',(1.95,2.275,1.025)); +#31677 = VECTOR('',#31678,1.); +#31678 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#31679 = PCURVE('',#30585,#31680); +#31680 = DEFINITIONAL_REPRESENTATION('',(#31681),#31685); +#31681 = LINE('',#31682,#31683); +#31682 = CARTESIAN_POINT('',(0.,0.)); +#31683 = VECTOR('',#31684,1.); +#31684 = DIRECTION('',(1.,0.)); +#31685 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31686 = PCURVE('',#31687,#31692); +#31687 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#31688,#31689) + ,(#31690,#31691 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.55),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#31688 = CARTESIAN_POINT('',(1.95,2.275,1.025)); +#31689 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#31690 = CARTESIAN_POINT('',(1.95,-2.275,1.025)); +#31691 = CARTESIAN_POINT('',(1.875,-2.2375,1.025)); +#31692 = DEFINITIONAL_REPRESENTATION('',(#31693),#31697); +#31693 = LINE('',#31694,#31695); +#31694 = CARTESIAN_POINT('',(4.440892098501E-16,-1.525603577073E-15)); +#31695 = VECTOR('',#31696,1.); +#31696 = DIRECTION('',(1.,-2.268566587707E-15)); +#31697 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31698 = ADVANCED_FACE('',(#31699),#30669,.F.); +#31699 = FACE_BOUND('',#31700,.F.); +#31700 = EDGE_LOOP('',(#31701,#31724,#31725,#31753)); +#31701 = ORIENTED_EDGE('',*,*,#31702,.F.); +#31702 = EDGE_CURVE('',#30654,#31703,#31705,.T.); +#31703 = VERTEX_POINT('',#31704); +#31704 = CARTESIAN_POINT('',(2.25,0.84,0.825)); +#31705 = SURFACE_CURVE('',#31706,(#31710,#31717),.PCURVE_S1.); +#31706 = LINE('',#31707,#31708); +#31707 = CARTESIAN_POINT('',(1.8,0.84,0.825)); +#31708 = VECTOR('',#31709,1.); +#31709 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#31710 = PCURVE('',#30669,#31711); +#31711 = DEFINITIONAL_REPRESENTATION('',(#31712),#31716); +#31712 = LINE('',#31713,#31714); +#31713 = CARTESIAN_POINT('',(0.,0.)); +#31714 = VECTOR('',#31715,1.); +#31715 = DIRECTION('',(1.,0.)); +#31716 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31717 = PCURVE('',#31144,#31718); +#31718 = DEFINITIONAL_REPRESENTATION('',(#31719),#31723); +#31719 = LINE('',#31720,#31721); +#31720 = CARTESIAN_POINT('',(0.292340342435,0.61578967201)); +#31721 = VECTOR('',#31722,1.); +#31722 = DIRECTION('',(0.,-1.)); +#31723 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31724 = ORIENTED_EDGE('',*,*,#30653,.T.); +#31725 = ORIENTED_EDGE('',*,*,#31726,.T.); +#31726 = EDGE_CURVE('',#30626,#31727,#31729,.T.); +#31727 = VERTEX_POINT('',#31728); +#31728 = CARTESIAN_POINT('',(2.25,0.43,0.825)); +#31729 = SURFACE_CURVE('',#31730,(#31734,#31741),.PCURVE_S1.); +#31730 = LINE('',#31731,#31732); +#31731 = CARTESIAN_POINT('',(1.8,0.43,0.825)); +#31732 = VECTOR('',#31733,1.); +#31733 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#31734 = PCURVE('',#30669,#31735); +#31735 = DEFINITIONAL_REPRESENTATION('',(#31736),#31740); +#31736 = LINE('',#31737,#31738); +#31737 = CARTESIAN_POINT('',(-9.103828801925E-17,-0.41)); +#31738 = VECTOR('',#31739,1.); +#31739 = DIRECTION('',(1.,0.)); +#31740 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31741 = PCURVE('',#31742,#31747); +#31742 = PLANE('',#31743); +#31743 = AXIS2_PLACEMENT_3D('',#31744,#31745,#31746); +#31744 = CARTESIAN_POINT('',(2.41578967201,0.43,0.532659657565)); +#31745 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#31746 = DIRECTION('',(0.,0.,1.)); +#31747 = DEFINITIONAL_REPRESENTATION('',(#31748),#31752); +#31748 = LINE('',#31749,#31750); +#31749 = CARTESIAN_POINT('',(0.292340342435,0.61578967201)); +#31750 = VECTOR('',#31751,1.); +#31751 = DIRECTION('',(0.,-1.)); +#31752 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31753 = ORIENTED_EDGE('',*,*,#31754,.F.); +#31754 = EDGE_CURVE('',#31703,#31727,#31755,.T.); +#31755 = SURFACE_CURVE('',#31756,(#31760,#31767),.PCURVE_S1.); +#31756 = LINE('',#31757,#31758); +#31757 = CARTESIAN_POINT('',(2.25,0.84,0.825)); +#31758 = VECTOR('',#31759,1.); +#31759 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#31760 = PCURVE('',#30669,#31761); +#31761 = DEFINITIONAL_REPRESENTATION('',(#31762),#31766); +#31762 = LINE('',#31763,#31764); +#31763 = CARTESIAN_POINT('',(0.45,-9.992007221625E-17)); +#31764 = VECTOR('',#31765,1.); +#31765 = DIRECTION('',(0.,-1.)); +#31766 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31767 = PCURVE('',#31768,#31773); +#31768 = CYLINDRICAL_SURFACE('',#31769,0.1); +#31769 = AXIS2_PLACEMENT_3D('',#31770,#31771,#31772); +#31770 = CARTESIAN_POINT('',(2.25,0.84,0.725)); +#31771 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#31772 = DIRECTION('',(4.440892098501E-15,9.860761315262E-31,1.)); +#31773 = DEFINITIONAL_REPRESENTATION('',(#31774),#31778); +#31774 = LINE('',#31775,#31776); +#31775 = CARTESIAN_POINT('',(0.,0.)); +#31776 = VECTOR('',#31777,1.); +#31777 = DIRECTION('',(0.,-1.)); +#31778 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31779 = ADVANCED_FACE('',(#31780),#30613,.F.); +#31780 = FACE_BOUND('',#31781,.F.); +#31781 = EDGE_LOOP('',(#31782,#31810,#31811,#31834)); +#31782 = ORIENTED_EDGE('',*,*,#31783,.F.); +#31783 = EDGE_CURVE('',#30598,#31784,#31786,.T.); +#31784 = VERTEX_POINT('',#31785); +#31785 = CARTESIAN_POINT('',(2.25,-0.43,0.825)); +#31786 = SURFACE_CURVE('',#31787,(#31791,#31798),.PCURVE_S1.); +#31787 = LINE('',#31788,#31789); +#31788 = CARTESIAN_POINT('',(1.8,-0.43,0.825)); +#31789 = VECTOR('',#31790,1.); +#31790 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#31791 = PCURVE('',#30613,#31792); +#31792 = DEFINITIONAL_REPRESENTATION('',(#31793),#31797); +#31793 = LINE('',#31794,#31795); +#31794 = CARTESIAN_POINT('',(0.,0.)); +#31795 = VECTOR('',#31796,1.); +#31796 = DIRECTION('',(1.,0.)); +#31797 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31798 = PCURVE('',#31799,#31804); +#31799 = PLANE('',#31800); +#31800 = AXIS2_PLACEMENT_3D('',#31801,#31802,#31803); +#31801 = CARTESIAN_POINT('',(2.41578967201,-0.43,0.532659657565)); +#31802 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#31803 = DIRECTION('',(0.,0.,1.)); +#31804 = DEFINITIONAL_REPRESENTATION('',(#31805),#31809); +#31805 = LINE('',#31806,#31807); +#31806 = CARTESIAN_POINT('',(0.292340342435,0.61578967201)); +#31807 = VECTOR('',#31808,1.); +#31808 = DIRECTION('',(0.,-1.)); +#31809 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31810 = ORIENTED_EDGE('',*,*,#30597,.T.); +#31811 = ORIENTED_EDGE('',*,*,#31812,.T.); +#31812 = EDGE_CURVE('',#30570,#31813,#31815,.T.); +#31813 = VERTEX_POINT('',#31814); +#31814 = CARTESIAN_POINT('',(2.25,-0.84,0.825)); +#31815 = SURFACE_CURVE('',#31816,(#31820,#31827),.PCURVE_S1.); +#31816 = LINE('',#31817,#31818); +#31817 = CARTESIAN_POINT('',(1.8,-0.84,0.825)); +#31818 = VECTOR('',#31819,1.); +#31819 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#31820 = PCURVE('',#30613,#31821); +#31821 = DEFINITIONAL_REPRESENTATION('',(#31822),#31826); +#31822 = LINE('',#31823,#31824); +#31823 = CARTESIAN_POINT('',(-9.103828801925E-17,-0.41)); +#31824 = VECTOR('',#31825,1.); +#31825 = DIRECTION('',(1.,0.)); +#31826 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31827 = PCURVE('',#31637,#31828); +#31828 = DEFINITIONAL_REPRESENTATION('',(#31829),#31833); +#31829 = LINE('',#31830,#31831); +#31830 = CARTESIAN_POINT('',(0.292340342435,0.61578967201)); +#31831 = VECTOR('',#31832,1.); +#31832 = DIRECTION('',(0.,-1.)); +#31833 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31834 = ORIENTED_EDGE('',*,*,#31835,.F.); +#31835 = EDGE_CURVE('',#31784,#31813,#31836,.T.); +#31836 = SURFACE_CURVE('',#31837,(#31841,#31848),.PCURVE_S1.); +#31837 = LINE('',#31838,#31839); +#31838 = CARTESIAN_POINT('',(2.25,-0.43,0.825)); +#31839 = VECTOR('',#31840,1.); +#31840 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#31841 = PCURVE('',#30613,#31842); +#31842 = DEFINITIONAL_REPRESENTATION('',(#31843),#31847); +#31843 = LINE('',#31844,#31845); +#31844 = CARTESIAN_POINT('',(0.45,-9.992007221625E-17)); +#31845 = VECTOR('',#31846,1.); +#31846 = DIRECTION('',(0.,-1.)); +#31847 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31848 = PCURVE('',#31849,#31854); +#31849 = CYLINDRICAL_SURFACE('',#31850,0.1); +#31850 = AXIS2_PLACEMENT_3D('',#31851,#31852,#31853); +#31851 = CARTESIAN_POINT('',(2.25,-0.43,0.725)); +#31852 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#31853 = DIRECTION('',(4.440892098501E-15,9.860761315262E-31,1.)); +#31854 = DEFINITIONAL_REPRESENTATION('',(#31855),#31859); +#31855 = LINE('',#31856,#31857); +#31856 = CARTESIAN_POINT('',(0.,0.)); +#31857 = VECTOR('',#31858,1.); +#31858 = DIRECTION('',(0.,-1.)); +#31859 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31860 = ADVANCED_FACE('',(#31861),#30641,.F.); +#31861 = FACE_BOUND('',#31862,.F.); +#31862 = EDGE_LOOP('',(#31863,#31886,#31887,#31910)); +#31863 = ORIENTED_EDGE('',*,*,#31864,.F.); +#31864 = EDGE_CURVE('',#30626,#31865,#31867,.T.); +#31865 = VERTEX_POINT('',#31866); +#31866 = CARTESIAN_POINT('',(1.95,0.43,1.025)); +#31867 = SURFACE_CURVE('',#31868,(#31872,#31879),.PCURVE_S1.); +#31868 = LINE('',#31869,#31870); +#31869 = CARTESIAN_POINT('',(1.95,0.43,0.778829828783)); +#31870 = VECTOR('',#31871,1.); +#31871 = DIRECTION('',(0.,0.,1.)); +#31872 = PCURVE('',#30641,#31873); +#31873 = DEFINITIONAL_REPRESENTATION('',(#31874),#31878); +#31874 = LINE('',#31875,#31876); +#31875 = CARTESIAN_POINT('',(1.845,-0.246170171217)); +#31876 = VECTOR('',#31877,1.); +#31877 = DIRECTION('',(0.,1.)); +#31878 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31879 = PCURVE('',#31742,#31880); +#31880 = DEFINITIONAL_REPRESENTATION('',(#31881),#31885); +#31881 = LINE('',#31882,#31883); +#31882 = CARTESIAN_POINT('',(0.246170171218,0.46578967201)); +#31883 = VECTOR('',#31884,1.); +#31884 = DIRECTION('',(1.,0.)); +#31885 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31886 = ORIENTED_EDGE('',*,*,#30625,.T.); +#31887 = ORIENTED_EDGE('',*,*,#31888,.T.); +#31888 = EDGE_CURVE('',#30598,#31889,#31891,.T.); +#31889 = VERTEX_POINT('',#31890); +#31890 = CARTESIAN_POINT('',(1.95,-0.43,1.025)); +#31891 = SURFACE_CURVE('',#31892,(#31896,#31903),.PCURVE_S1.); +#31892 = LINE('',#31893,#31894); +#31893 = CARTESIAN_POINT('',(1.95,-0.43,0.778829828783)); +#31894 = VECTOR('',#31895,1.); +#31895 = DIRECTION('',(0.,0.,1.)); +#31896 = PCURVE('',#30641,#31897); +#31897 = DEFINITIONAL_REPRESENTATION('',(#31898),#31902); +#31898 = LINE('',#31899,#31900); +#31899 = CARTESIAN_POINT('',(2.705,-0.246170171217)); +#31900 = VECTOR('',#31901,1.); +#31901 = DIRECTION('',(0.,1.)); +#31902 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31903 = PCURVE('',#31799,#31904); +#31904 = DEFINITIONAL_REPRESENTATION('',(#31905),#31909); +#31905 = LINE('',#31906,#31907); +#31906 = CARTESIAN_POINT('',(0.246170171218,0.46578967201)); +#31907 = VECTOR('',#31908,1.); +#31908 = DIRECTION('',(1.,0.)); +#31909 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31910 = ORIENTED_EDGE('',*,*,#31911,.F.); +#31911 = EDGE_CURVE('',#31865,#31889,#31912,.T.); +#31912 = SURFACE_CURVE('',#31913,(#31917,#31924),.PCURVE_S1.); +#31913 = LINE('',#31914,#31915); +#31914 = CARTESIAN_POINT('',(1.95,2.275,1.025)); +#31915 = VECTOR('',#31916,1.); +#31916 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#31917 = PCURVE('',#30641,#31918); +#31918 = DEFINITIONAL_REPRESENTATION('',(#31919),#31923); +#31919 = LINE('',#31920,#31921); +#31920 = CARTESIAN_POINT('',(0.,0.)); +#31921 = VECTOR('',#31922,1.); +#31922 = DIRECTION('',(1.,0.)); +#31923 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31924 = PCURVE('',#31925,#31930); +#31925 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#31926,#31927) + ,(#31928,#31929 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.55),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#31926 = CARTESIAN_POINT('',(1.95,2.275,1.025)); +#31927 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#31928 = CARTESIAN_POINT('',(1.95,-2.275,1.025)); +#31929 = CARTESIAN_POINT('',(1.875,-2.2375,1.025)); +#31930 = DEFINITIONAL_REPRESENTATION('',(#31931),#31935); +#31931 = LINE('',#31932,#31933); +#31932 = CARTESIAN_POINT('',(4.440892098501E-16,4.650842583769E-16)); +#31933 = VECTOR('',#31934,1.); +#31934 = DIRECTION('',(1.,-3.444569116312E-15)); +#31935 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31936 = ADVANCED_FACE('',(#31937),#30795,.F.); +#31937 = FACE_BOUND('',#31938,.F.); +#31938 = EDGE_LOOP('',(#31939,#31940,#31941,#31969)); +#31939 = ORIENTED_EDGE('',*,*,#31363,.T.); +#31940 = ORIENTED_EDGE('',*,*,#30781,.T.); +#31941 = ORIENTED_EDGE('',*,*,#31942,.F.); +#31942 = EDGE_CURVE('',#31943,#30782,#31945,.T.); +#31943 = VERTEX_POINT('',#31944); +#31944 = CARTESIAN_POINT('',(1.775,2.45,1.025)); +#31945 = SURFACE_CURVE('',#31946,(#31950,#31957),.PCURVE_S1.); +#31946 = LINE('',#31947,#31948); +#31947 = CARTESIAN_POINT('',(1.775,2.45,1.025)); +#31948 = VECTOR('',#31949,1.); +#31949 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#31950 = PCURVE('',#30795,#31951); +#31951 = DEFINITIONAL_REPRESENTATION('',(#31952),#31956); +#31952 = LINE('',#31953,#31954); +#31953 = CARTESIAN_POINT('',(0.,0.)); +#31954 = VECTOR('',#31955,1.); +#31955 = DIRECTION('',(1.,0.)); +#31956 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31957 = PCURVE('',#31958,#31963); +#31958 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#31959,#31960) + ,(#31961,#31962 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#31959 = CARTESIAN_POINT('',(1.775,2.45,1.025)); +#31960 = CARTESIAN_POINT('',(1.7375,2.375,1.025)); +#31961 = CARTESIAN_POINT('',(1.95,2.275,1.025)); +#31962 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#31963 = DEFINITIONAL_REPRESENTATION('',(#31964),#31968); +#31964 = LINE('',#31965,#31966); +#31965 = CARTESIAN_POINT('',(-1.427240192909E-16,-5.26430630895E-15)); +#31966 = VECTOR('',#31967,1.); +#31967 = DIRECTION('',(1.,-4.801228329872E-15)); +#31968 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31969 = ORIENTED_EDGE('',*,*,#31970,.F.); +#31970 = EDGE_CURVE('',#31364,#31943,#31971,.T.); +#31971 = SURFACE_CURVE('',#31972,(#31975,#31981),.PCURVE_S1.); +#31972 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#31973,#31974),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#31973 = CARTESIAN_POINT('',(1.775,2.45,0.825)); +#31974 = CARTESIAN_POINT('',(1.775,2.45,1.025)); +#31975 = PCURVE('',#30795,#31976); +#31976 = DEFINITIONAL_REPRESENTATION('',(#31977),#31980); +#31977 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#31978,#31979),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#31978 = CARTESIAN_POINT('',(0.,-0.2)); +#31979 = CARTESIAN_POINT('',(0.,0.)); +#31980 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31981 = PCURVE('',#31982,#31987); +#31982 = PLANE('',#31983); +#31983 = AXIS2_PLACEMENT_3D('',#31984,#31985,#31986); +#31984 = CARTESIAN_POINT('',(-1.775,2.45,1.025)); +#31985 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#31986 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#31987 = DEFINITIONAL_REPRESENTATION('',(#31988),#31991); +#31988 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#31989,#31990),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#31989 = CARTESIAN_POINT('',(3.55,-0.2)); +#31990 = CARTESIAN_POINT('',(3.55,0.)); +#31991 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#31992 = ADVANCED_FACE('',(#31993),#30822,.F.); +#31993 = FACE_BOUND('',#31994,.F.); +#31994 = EDGE_LOOP('',(#31995,#32017,#32018,#32019)); +#31995 = ORIENTED_EDGE('',*,*,#31996,.F.); +#31996 = EDGE_CURVE('',#30782,#31997,#31999,.T.); +#31997 = VERTEX_POINT('',#31998); +#31998 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#31999 = SURFACE_CURVE('',#32000,(#32003,#32010),.PCURVE_S1.); +#32000 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#32001,#32002),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#32001 = CARTESIAN_POINT('',(1.95,2.275,1.025)); +#32002 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#32003 = PCURVE('',#30822,#32004); +#32004 = DEFINITIONAL_REPRESENTATION('',(#32005),#32009); +#32005 = LINE('',#32006,#32007); +#32006 = CARTESIAN_POINT('',(3.582431915782E-16,6.610125476969E-16)); +#32007 = VECTOR('',#32008,1.); +#32008 = DIRECTION('',(2.539634103421E-16,1.)); +#32009 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32010 = PCURVE('',#31958,#32011); +#32011 = DEFINITIONAL_REPRESENTATION('',(#32012),#32016); +#32012 = LINE('',#32013,#32014); +#32013 = CARTESIAN_POINT('',(0.247487373415,-4.47881987592E-15)); +#32014 = VECTOR('',#32015,1.); +#32015 = DIRECTION('',(3.330669073875E-16,1.)); +#32016 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32017 = ORIENTED_EDGE('',*,*,#30808,.T.); +#32018 = ORIENTED_EDGE('',*,*,#30938,.T.); +#32019 = ORIENTED_EDGE('',*,*,#32020,.F.); +#32020 = EDGE_CURVE('',#31997,#30911,#32021,.T.); +#32021 = SURFACE_CURVE('',#32022,(#32026,#32032),.PCURVE_S1.); +#32022 = LINE('',#32023,#32024); +#32023 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#32024 = VECTOR('',#32025,1.); +#32025 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#32026 = PCURVE('',#30822,#32027); +#32027 = DEFINITIONAL_REPRESENTATION('',(#32028),#32031); +#32028 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#32029,#32030),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,0.1275),.PIECEWISE_BEZIER_KNOTS.); +#32029 = CARTESIAN_POINT('',(6.122066019203E-16,1.)); +#32030 = CARTESIAN_POINT('',(0.129636871508,1.)); +#32031 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32032 = PCURVE('',#30926,#32033); +#32033 = DEFINITIONAL_REPRESENTATION('',(#32034),#32038); +#32034 = LINE('',#32035,#32036); +#32035 = CARTESIAN_POINT('',(9.892682991552E-17,9.298836221054E-17)); +#32036 = VECTOR('',#32037,1.); +#32037 = DIRECTION('',(1.,6.324161807868E-16)); +#32038 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32039 = ADVANCED_FACE('',(#32040),#30926,.F.); +#32040 = FACE_BOUND('',#32041,.F.); +#32041 = EDGE_LOOP('',(#32042,#32043,#32044,#32066,#32094,#32116,#32144, + #32166,#32194,#32216,#32243,#32270)); +#32042 = ORIENTED_EDGE('',*,*,#32020,.T.); +#32043 = ORIENTED_EDGE('',*,*,#30910,.T.); +#32044 = ORIENTED_EDGE('',*,*,#32045,.T.); +#32045 = EDGE_CURVE('',#30861,#32046,#32048,.T.); +#32046 = VERTEX_POINT('',#32047); +#32047 = CARTESIAN_POINT('',(1.875,0.84,1.025)); +#32048 = SURFACE_CURVE('',#32049,(#32053,#32060),.PCURVE_S1.); +#32049 = LINE('',#32050,#32051); +#32050 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#32051 = VECTOR('',#32052,1.); +#32052 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#32053 = PCURVE('',#30926,#32054); +#32054 = DEFINITIONAL_REPRESENTATION('',(#32055),#32059); +#32055 = LINE('',#32056,#32057); +#32056 = CARTESIAN_POINT('',(0.,2.08919418951E-18)); +#32057 = VECTOR('',#32058,1.); +#32058 = DIRECTION('',(1.,5.501662465529E-17)); +#32059 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32060 = PCURVE('',#30876,#32061); +#32061 = DEFINITIONAL_REPRESENTATION('',(#32062),#32065); +#32062 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#32063,#32064),.UNSPECIFIED., + .F.,.F.,(2,2),(0.5375,1.3975),.PIECEWISE_BEZIER_KNOTS.); +#32063 = CARTESIAN_POINT('',(0.546508379888,1.)); +#32064 = CARTESIAN_POINT('',(1.420921787709,1.)); +#32065 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32066 = ORIENTED_EDGE('',*,*,#32067,.T.); +#32067 = EDGE_CURVE('',#32046,#32068,#32070,.T.); +#32068 = VERTEX_POINT('',#32069); +#32069 = CARTESIAN_POINT('',(1.875,0.43,1.025)); +#32070 = SURFACE_CURVE('',#32071,(#32075,#32082),.PCURVE_S1.); +#32071 = LINE('',#32072,#32073); +#32072 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#32073 = VECTOR('',#32074,1.); +#32074 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#32075 = PCURVE('',#30926,#32076); +#32076 = DEFINITIONAL_REPRESENTATION('',(#32077),#32081); +#32077 = LINE('',#32078,#32079); +#32078 = CARTESIAN_POINT('',(2.22044604925E-16,1.929411984959E-16)); +#32079 = VECTOR('',#32080,1.); +#32080 = DIRECTION('',(1.,-1.154113379257E-16)); +#32081 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32082 = PCURVE('',#32083,#32088); +#32083 = PLANE('',#32084); +#32084 = AXIS2_PLACEMENT_3D('',#32085,#32086,#32087); +#32085 = CARTESIAN_POINT('',(2.25,0.84,1.025)); +#32086 = DIRECTION('',(0.,0.,-1.)); +#32087 = DIRECTION('',(-1.,-2.22044604925E-16,-0.)); +#32088 = DEFINITIONAL_REPRESENTATION('',(#32089),#32093); +#32089 = LINE('',#32090,#32091); +#32090 = CARTESIAN_POINT('',(0.375,1.3975)); +#32091 = VECTOR('',#32092,1.); +#32092 = DIRECTION('',(0.,-1.)); +#32093 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32094 = ORIENTED_EDGE('',*,*,#32095,.T.); +#32095 = EDGE_CURVE('',#32068,#32096,#32098,.T.); +#32096 = VERTEX_POINT('',#32097); +#32097 = CARTESIAN_POINT('',(1.875,-0.43,1.025)); +#32098 = SURFACE_CURVE('',#32099,(#32103,#32110),.PCURVE_S1.); +#32099 = LINE('',#32100,#32101); +#32100 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#32101 = VECTOR('',#32102,1.); +#32102 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#32103 = PCURVE('',#30926,#32104); +#32104 = DEFINITIONAL_REPRESENTATION('',(#32105),#32109); +#32105 = LINE('',#32106,#32107); +#32106 = CARTESIAN_POINT('',(0.,-1.103120379896E-16)); +#32107 = VECTOR('',#32108,1.); +#32108 = DIRECTION('',(1.,2.819575854973E-21)); +#32109 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32110 = PCURVE('',#31925,#32111); +#32111 = DEFINITIONAL_REPRESENTATION('',(#32112),#32115); +#32112 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#32113,#32114),.UNSPECIFIED., + .F.,.F.,(2,2),(1.8075,2.6675),.PIECEWISE_BEZIER_KNOTS.); +#32113 = CARTESIAN_POINT('',(1.837793296089,1.)); +#32114 = CARTESIAN_POINT('',(2.712206703911,1.)); +#32115 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32116 = ORIENTED_EDGE('',*,*,#32117,.T.); +#32117 = EDGE_CURVE('',#32096,#32118,#32120,.T.); +#32118 = VERTEX_POINT('',#32119); +#32119 = CARTESIAN_POINT('',(1.875,-0.84,1.025)); +#32120 = SURFACE_CURVE('',#32121,(#32125,#32132),.PCURVE_S1.); +#32121 = LINE('',#32122,#32123); +#32122 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#32123 = VECTOR('',#32124,1.); +#32124 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#32125 = PCURVE('',#30926,#32126); +#32126 = DEFINITIONAL_REPRESENTATION('',(#32127),#32131); +#32127 = LINE('',#32128,#32129); +#32128 = CARTESIAN_POINT('',(0.,-8.206977039385E-16)); +#32129 = VECTOR('',#32130,1.); +#32130 = DIRECTION('',(1.,2.308345043547E-16)); +#32131 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32132 = PCURVE('',#32133,#32138); +#32133 = PLANE('',#32134); +#32134 = AXIS2_PLACEMENT_3D('',#32135,#32136,#32137); +#32135 = CARTESIAN_POINT('',(2.25,-0.43,1.025)); +#32136 = DIRECTION('',(0.,0.,-1.)); +#32137 = DIRECTION('',(-1.,-2.22044604925E-16,-0.)); +#32138 = DEFINITIONAL_REPRESENTATION('',(#32139),#32143); +#32139 = LINE('',#32140,#32141); +#32140 = CARTESIAN_POINT('',(0.375,2.6675)); +#32141 = VECTOR('',#32142,1.); +#32142 = DIRECTION('',(0.,-1.)); +#32143 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32144 = ORIENTED_EDGE('',*,*,#32145,.T.); +#32145 = EDGE_CURVE('',#32118,#32146,#32148,.T.); +#32146 = VERTEX_POINT('',#32147); +#32147 = CARTESIAN_POINT('',(1.875,-1.7,1.025)); +#32148 = SURFACE_CURVE('',#32149,(#32153,#32160),.PCURVE_S1.); +#32149 = LINE('',#32150,#32151); +#32150 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#32151 = VECTOR('',#32152,1.); +#32152 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#32153 = PCURVE('',#30926,#32154); +#32154 = DEFINITIONAL_REPRESENTATION('',(#32155),#32159); +#32155 = LINE('',#32156,#32157); +#32156 = CARTESIAN_POINT('',(0.,-2.04955340595E-16)); +#32157 = VECTOR('',#32158,1.); +#32158 = DIRECTION('',(1.,2.819498569694E-21)); +#32159 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32160 = PCURVE('',#31687,#32161); +#32161 = DEFINITIONAL_REPRESENTATION('',(#32162),#32165); +#32162 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#32163,#32164),.UNSPECIFIED., + .F.,.F.,(2,2),(3.0775,3.9375),.PIECEWISE_BEZIER_KNOTS.); +#32163 = CARTESIAN_POINT('',(3.129078212291,1.)); +#32164 = CARTESIAN_POINT('',(4.003491620112,1.)); +#32165 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32166 = ORIENTED_EDGE('',*,*,#32167,.T.); +#32167 = EDGE_CURVE('',#32146,#32168,#32170,.T.); +#32168 = VERTEX_POINT('',#32169); +#32169 = CARTESIAN_POINT('',(1.875,-2.11,1.025)); +#32170 = SURFACE_CURVE('',#32171,(#32175,#32182),.PCURVE_S1.); +#32171 = LINE('',#32172,#32173); +#32172 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#32173 = VECTOR('',#32174,1.); +#32174 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#32175 = PCURVE('',#30926,#32176); +#32176 = DEFINITIONAL_REPRESENTATION('',(#32177),#32181); +#32177 = LINE('',#32178,#32179); +#32178 = CARTESIAN_POINT('',(4.440892098501E-16,1.457818411555E-15)); +#32179 = VECTOR('',#32180,1.); +#32180 = DIRECTION('',(1.,-3.824640944042E-16)); +#32181 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32182 = PCURVE('',#32183,#32188); +#32183 = PLANE('',#32184); +#32184 = AXIS2_PLACEMENT_3D('',#32185,#32186,#32187); +#32185 = CARTESIAN_POINT('',(2.25,-1.7,1.025)); +#32186 = DIRECTION('',(0.,0.,-1.)); +#32187 = DIRECTION('',(-1.,-2.22044604925E-16,-0.)); +#32188 = DEFINITIONAL_REPRESENTATION('',(#32189),#32193); +#32189 = LINE('',#32190,#32191); +#32190 = CARTESIAN_POINT('',(0.375,3.9375)); +#32191 = VECTOR('',#32192,1.); +#32192 = DIRECTION('',(0.,-1.)); +#32193 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32194 = ORIENTED_EDGE('',*,*,#32195,.T.); +#32195 = EDGE_CURVE('',#32168,#32196,#32198,.T.); +#32196 = VERTEX_POINT('',#32197); +#32197 = CARTESIAN_POINT('',(1.875,-2.2375,1.025)); +#32198 = SURFACE_CURVE('',#32199,(#32203,#32210),.PCURVE_S1.); +#32199 = LINE('',#32200,#32201); +#32200 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#32201 = VECTOR('',#32202,1.); +#32202 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#32203 = PCURVE('',#30926,#32204); +#32204 = DEFINITIONAL_REPRESENTATION('',(#32205),#32209); +#32205 = LINE('',#32206,#32207); +#32206 = CARTESIAN_POINT('',(0.,6.427961929068E-15)); +#32207 = VECTOR('',#32208,1.); +#32208 = DIRECTION('',(1.,-1.489613775567E-15)); +#32209 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32210 = PCURVE('',#31525,#32211); +#32211 = DEFINITIONAL_REPRESENTATION('',(#32212),#32215); +#32212 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#32213,#32214),.UNSPECIFIED., + .F.,.F.,(2,2),(4.3475,4.475),.PIECEWISE_BEZIER_KNOTS.); +#32213 = CARTESIAN_POINT('',(4.420363128492,1.)); +#32214 = CARTESIAN_POINT('',(4.55,1.)); +#32215 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32216 = ORIENTED_EDGE('',*,*,#32217,.T.); +#32217 = EDGE_CURVE('',#32196,#32218,#32220,.T.); +#32218 = VERTEX_POINT('',#32219); +#32219 = CARTESIAN_POINT('',(1.760171280765,-2.180085640382,1.75)); +#32220 = SURFACE_CURVE('',#32221,(#32224,#32231),.PCURVE_S1.); +#32221 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#32222,#32223),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#32222 = CARTESIAN_POINT('',(1.875,-2.2375,1.025)); +#32223 = CARTESIAN_POINT('',(1.760171280765,-2.180085640382,1.75)); +#32224 = PCURVE('',#30926,#32225); +#32225 = DEFINITIONAL_REPRESENTATION('',(#32226),#32230); +#32226 = LINE('',#32227,#32228); +#32227 = CARTESIAN_POINT('',(4.475,1.080348556673E-16)); +#32228 = VECTOR('',#32229,1.); +#32229 = DIRECTION('',(0.,1.)); +#32230 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32231 = PCURVE('',#32232,#32237); +#32232 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#32233,#32234) + ,(#32235,#32236 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#32233 = CARTESIAN_POINT('',(1.875,-2.2375,1.025)); +#32234 = CARTESIAN_POINT('',(1.760171280765,-2.180085640382,1.75)); +#32235 = CARTESIAN_POINT('',(1.7375,-2.375,1.025)); +#32236 = CARTESIAN_POINT('',(1.680085640382,-2.260171280765,1.75)); +#32237 = DEFINITIONAL_REPRESENTATION('',(#32238),#32242); +#32238 = LINE('',#32239,#32240); +#32239 = CARTESIAN_POINT('',(-1.318037530753E-16,1.463330846146E-16)); +#32240 = VECTOR('',#32241,1.); +#32241 = DIRECTION('',(2.6730391658E-16,1.)); +#32242 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32243 = ORIENTED_EDGE('',*,*,#32244,.F.); +#32244 = EDGE_CURVE('',#32245,#32218,#32247,.T.); +#32245 = VERTEX_POINT('',#32246); +#32246 = CARTESIAN_POINT('',(1.760171280765,2.180085640382,1.75)); +#32247 = SURFACE_CURVE('',#32248,(#32252,#32258),.PCURVE_S1.); +#32248 = LINE('',#32249,#32250); +#32249 = CARTESIAN_POINT('',(1.760171280765,2.180085640382,1.75)); +#32250 = VECTOR('',#32251,1.); +#32251 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#32252 = PCURVE('',#30926,#32253); +#32253 = DEFINITIONAL_REPRESENTATION('',(#32254),#32257); +#32254 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#32255,#32256),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,4.360171280764),.PIECEWISE_BEZIER_KNOTS.); +#32255 = CARTESIAN_POINT('',(-3.026276149984E-17,1.)); +#32256 = CARTESIAN_POINT('',(4.475,1.)); +#32257 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32258 = PCURVE('',#32259,#32264); +#32259 = PLANE('',#32260); +#32260 = AXIS2_PLACEMENT_3D('',#32261,#32262,#32263); +#32261 = CARTESIAN_POINT('',(-1.680085640382,2.260171280765,1.75)); +#32262 = DIRECTION('',(0.,0.,-1.)); +#32263 = DIRECTION('',(0.596575959062,-0.802556617983,0.)); +#32264 = DEFINITIONAL_REPRESENTATION('',(#32265),#32269); +#32265 = LINE('',#32266,#32267); +#32266 = CARTESIAN_POINT('',(2.116647832849,-2.713223791911)); +#32267 = VECTOR('',#32268,1.); +#32268 = DIRECTION('',(0.802556617983,0.596575959062)); +#32269 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32270 = ORIENTED_EDGE('',*,*,#32271,.F.); +#32271 = EDGE_CURVE('',#31997,#32245,#32272,.T.); +#32272 = SURFACE_CURVE('',#32273,(#32276,#32283),.PCURVE_S1.); +#32273 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#32274,#32275),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#32274 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#32275 = CARTESIAN_POINT('',(1.760171280765,2.180085640382,1.75)); +#32276 = PCURVE('',#30926,#32277); +#32277 = DEFINITIONAL_REPRESENTATION('',(#32278),#32282); +#32278 = LINE('',#32279,#32280); +#32279 = CARTESIAN_POINT('',(9.892682991552E-17,9.298836221054E-17)); +#32280 = VECTOR('',#32281,1.); +#32281 = DIRECTION('',(-1.319780525915E-16,1.)); +#32282 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32283 = PCURVE('',#32284,#32289); +#32284 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#32285,#32286) + ,(#32287,#32288 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#32285 = CARTESIAN_POINT('',(1.7375,2.375,1.025)); +#32286 = CARTESIAN_POINT('',(1.680085640382,2.260171280765,1.75)); +#32287 = CARTESIAN_POINT('',(1.875,2.2375,1.025)); +#32288 = CARTESIAN_POINT('',(1.760171280765,2.180085640382,1.75)); +#32289 = DEFINITIONAL_REPRESENTATION('',(#32290),#32294); +#32290 = LINE('',#32291,#32292); +#32291 = CARTESIAN_POINT('',(0.194454364826,4.01822944048E-17)); +#32292 = VECTOR('',#32293,1.); +#32293 = DIRECTION('',(2.498001805407E-16,1.)); +#32294 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32295 = ADVANCED_FACE('',(#32296),#30876,.F.); +#32296 = FACE_BOUND('',#32297,.F.); +#32297 = EDGE_LOOP('',(#32298,#32299,#32300,#32320)); +#32298 = ORIENTED_EDGE('',*,*,#30860,.F.); +#32299 = ORIENTED_EDGE('',*,*,#31156,.T.); +#32300 = ORIENTED_EDGE('',*,*,#32301,.T.); +#32301 = EDGE_CURVE('',#31129,#32046,#32302,.T.); +#32302 = SURFACE_CURVE('',#32303,(#32307,#32313),.PCURVE_S1.); +#32303 = LINE('',#32304,#32305); +#32304 = CARTESIAN_POINT('',(2.25,0.84,1.025)); +#32305 = VECTOR('',#32306,1.); +#32306 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#32307 = PCURVE('',#30876,#32308); +#32308 = DEFINITIONAL_REPRESENTATION('',(#32309),#32312); +#32309 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#32310,#32311),.UNSPECIFIED., + .F.,.F.,(2,2),(0.3,0.375),.PIECEWISE_BEZIER_KNOTS.); +#32310 = CARTESIAN_POINT('',(1.435,2.872827200473E-16)); +#32311 = CARTESIAN_POINT('',(1.420921787709,1.)); +#32312 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32313 = PCURVE('',#32083,#32314); +#32314 = DEFINITIONAL_REPRESENTATION('',(#32315),#32319); +#32315 = LINE('',#32316,#32317); +#32316 = CARTESIAN_POINT('',(-0.,0.)); +#32317 = VECTOR('',#32318,1.); +#32318 = DIRECTION('',(1.,0.)); +#32319 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32320 = ORIENTED_EDGE('',*,*,#32045,.F.); +#32321 = ADVANCED_FACE('',(#32322),#31144,.F.); +#32322 = FACE_BOUND('',#32323,.F.); +#32323 = EDGE_LOOP('',(#32324,#32325,#32326,#32354,#32382,#32411,#32439, + #32467,#32495,#32528,#32556,#32585)); +#32324 = ORIENTED_EDGE('',*,*,#31128,.F.); +#32325 = ORIENTED_EDGE('',*,*,#31702,.T.); +#32326 = ORIENTED_EDGE('',*,*,#32327,.T.); +#32327 = EDGE_CURVE('',#31703,#32328,#32330,.T.); +#32328 = VERTEX_POINT('',#32329); +#32329 = CARTESIAN_POINT('',(2.35,0.84,0.725)); +#32330 = SURFACE_CURVE('',#32331,(#32336,#32347),.PCURVE_S1.); +#32331 = CIRCLE('',#32332,0.1); +#32332 = AXIS2_PLACEMENT_3D('',#32333,#32334,#32335); +#32333 = CARTESIAN_POINT('',(2.25,0.84,0.725)); +#32334 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#32335 = DIRECTION('',(4.440892098501E-15,9.860761315262E-31,1.)); +#32336 = PCURVE('',#31144,#32337); +#32337 = DEFINITIONAL_REPRESENTATION('',(#32338),#32346); +#32338 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#32339,#32340,#32341,#32342 + ,#32343,#32344,#32345),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#32339 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#32340 = CARTESIAN_POINT('',(0.292340342435,-7.415408746888E-03)); +#32341 = CARTESIAN_POINT('',(0.142340342435,7.918713163156E-02)); +#32342 = CARTESIAN_POINT('',(-7.659657565E-03,0.16578967201)); +#32343 = CARTESIAN_POINT('',(0.142340342435,0.252392212388)); +#32344 = CARTESIAN_POINT('',(0.292340342435,0.338994752767)); +#32345 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#32346 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32347 = PCURVE('',#31768,#32348); +#32348 = DEFINITIONAL_REPRESENTATION('',(#32349),#32353); +#32349 = LINE('',#32350,#32351); +#32350 = CARTESIAN_POINT('',(0.,0.)); +#32351 = VECTOR('',#32352,1.); +#32352 = DIRECTION('',(1.,-7.067899292141E-17)); +#32353 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32354 = ORIENTED_EDGE('',*,*,#32355,.T.); +#32355 = EDGE_CURVE('',#32328,#32356,#32358,.T.); +#32356 = VERTEX_POINT('',#32357); +#32357 = CARTESIAN_POINT('',(2.35,0.84,0.3)); +#32358 = SURFACE_CURVE('',#32359,(#32363,#32370),.PCURVE_S1.); +#32359 = LINE('',#32360,#32361); +#32360 = CARTESIAN_POINT('',(2.35,0.84,0.725)); +#32361 = VECTOR('',#32362,1.); +#32362 = DIRECTION('',(1.044915787883E-15,2.320179133003E-31,-1.)); +#32363 = PCURVE('',#31144,#32364); +#32364 = DEFINITIONAL_REPRESENTATION('',(#32365),#32369); +#32365 = LINE('',#32366,#32367); +#32366 = CARTESIAN_POINT('',(0.192340342435,6.578967201E-02)); +#32367 = VECTOR('',#32368,1.); +#32368 = DIRECTION('',(-1.,-1.044915787883E-15)); +#32369 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32370 = PCURVE('',#32371,#32376); +#32371 = PLANE('',#32372); +#32372 = AXIS2_PLACEMENT_3D('',#32373,#32374,#32375); +#32373 = CARTESIAN_POINT('',(2.35,0.84,0.725)); +#32374 = DIRECTION('',(1.,2.22044604925E-16,1.044915787883E-15)); +#32375 = DIRECTION('',(1.044915787883E-15,2.320179133003E-31,-1.)); +#32376 = DEFINITIONAL_REPRESENTATION('',(#32377),#32381); +#32377 = LINE('',#32378,#32379); +#32378 = CARTESIAN_POINT('',(0.,0.)); +#32379 = VECTOR('',#32380,1.); +#32380 = DIRECTION('',(1.,0.)); +#32381 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32382 = ORIENTED_EDGE('',*,*,#32383,.T.); +#32383 = EDGE_CURVE('',#32356,#32384,#32386,.T.); +#32384 = VERTEX_POINT('',#32385); +#32385 = CARTESIAN_POINT('',(2.65,0.84,5.551115123126E-17)); +#32386 = SURFACE_CURVE('',#32387,(#32392,#32399),.PCURVE_S1.); +#32387 = CIRCLE('',#32388,0.3); +#32388 = AXIS2_PLACEMENT_3D('',#32389,#32390,#32391); +#32389 = CARTESIAN_POINT('',(2.65,0.84,0.3)); +#32390 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#32391 = DIRECTION('',(-1.,-2.22044604925E-16,3.515706244646E-15)); +#32392 = PCURVE('',#31144,#32393); +#32393 = DEFINITIONAL_REPRESENTATION('',(#32394),#32398); +#32394 = CIRCLE('',#32395,0.3); +#32395 = AXIS2_PLACEMENT_2D('',#32396,#32397); +#32396 = CARTESIAN_POINT('',(-0.232659657565,-0.23421032799)); +#32397 = DIRECTION('',(3.515706244646E-15,1.)); +#32398 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32399 = PCURVE('',#32400,#32405); +#32400 = CYLINDRICAL_SURFACE('',#32401,0.3); +#32401 = AXIS2_PLACEMENT_3D('',#32402,#32403,#32404); +#32402 = CARTESIAN_POINT('',(2.65,0.84,0.3)); +#32403 = DIRECTION('',(-2.22044604925E-16,1.,-0.)); +#32404 = DIRECTION('',(-1.,-2.22044604925E-16,3.515706244646E-15)); +#32405 = DEFINITIONAL_REPRESENTATION('',(#32406),#32410); +#32406 = LINE('',#32407,#32408); +#32407 = CARTESIAN_POINT('',(6.28318530718,-1.110223024625E-16)); +#32408 = VECTOR('',#32409,1.); +#32409 = DIRECTION('',(-1.,7.067899292141E-17)); +#32410 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32411 = ORIENTED_EDGE('',*,*,#32412,.T.); +#32412 = EDGE_CURVE('',#32384,#32413,#32415,.T.); +#32413 = VERTEX_POINT('',#32414); +#32414 = CARTESIAN_POINT('',(3.,0.84,5.551115123126E-17)); +#32415 = SURFACE_CURVE('',#32416,(#32420,#32427),.PCURVE_S1.); +#32416 = LINE('',#32417,#32418); +#32417 = CARTESIAN_POINT('',(2.65,0.84,5.551115123126E-17)); +#32418 = VECTOR('',#32419,1.); +#32419 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#32420 = PCURVE('',#31144,#32421); +#32421 = DEFINITIONAL_REPRESENTATION('',(#32422),#32426); +#32422 = LINE('',#32423,#32424); +#32423 = CARTESIAN_POINT('',(-0.532659657565,-0.23421032799)); +#32424 = VECTOR('',#32425,1.); +#32425 = DIRECTION('',(0.,-1.)); +#32426 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32427 = PCURVE('',#32428,#32433); +#32428 = PLANE('',#32429); +#32429 = AXIS2_PLACEMENT_3D('',#32430,#32431,#32432); +#32430 = CARTESIAN_POINT('',(2.65,0.84,5.551115123126E-17)); +#32431 = DIRECTION('',(0.,0.,1.)); +#32432 = DIRECTION('',(1.,2.22044604925E-16,-0.)); +#32433 = DEFINITIONAL_REPRESENTATION('',(#32434),#32438); +#32434 = LINE('',#32435,#32436); +#32435 = CARTESIAN_POINT('',(0.,0.)); +#32436 = VECTOR('',#32437,1.); +#32437 = DIRECTION('',(1.,0.)); +#32438 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32439 = ORIENTED_EDGE('',*,*,#32440,.T.); +#32440 = EDGE_CURVE('',#32413,#32441,#32443,.T.); +#32441 = VERTEX_POINT('',#32442); +#32442 = CARTESIAN_POINT('',(3.,0.84,0.2)); +#32443 = SURFACE_CURVE('',#32444,(#32448,#32455),.PCURVE_S1.); +#32444 = LINE('',#32445,#32446); +#32445 = CARTESIAN_POINT('',(3.,0.84,5.551115123126E-17)); +#32446 = VECTOR('',#32447,1.); +#32447 = DIRECTION('',(0.,0.,1.)); +#32448 = PCURVE('',#31144,#32449); +#32449 = DEFINITIONAL_REPRESENTATION('',(#32450),#32454); +#32450 = LINE('',#32451,#32452); +#32451 = CARTESIAN_POINT('',(-0.532659657565,-0.58421032799)); +#32452 = VECTOR('',#32453,1.); +#32453 = DIRECTION('',(1.,0.)); +#32454 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32455 = PCURVE('',#32456,#32461); +#32456 = PLANE('',#32457); +#32457 = AXIS2_PLACEMENT_3D('',#32458,#32459,#32460); +#32458 = CARTESIAN_POINT('',(3.,0.84,5.551115123126E-17)); +#32459 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#32460 = DIRECTION('',(0.,0.,1.)); +#32461 = DEFINITIONAL_REPRESENTATION('',(#32462),#32466); +#32462 = LINE('',#32463,#32464); +#32463 = CARTESIAN_POINT('',(0.,0.)); +#32464 = VECTOR('',#32465,1.); +#32465 = DIRECTION('',(1.,0.)); +#32466 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32467 = ORIENTED_EDGE('',*,*,#32468,.T.); +#32468 = EDGE_CURVE('',#32441,#32469,#32471,.T.); +#32469 = VERTEX_POINT('',#32470); +#32470 = CARTESIAN_POINT('',(2.65,0.84,0.2)); +#32471 = SURFACE_CURVE('',#32472,(#32476,#32483),.PCURVE_S1.); +#32472 = LINE('',#32473,#32474); +#32473 = CARTESIAN_POINT('',(3.,0.84,0.2)); +#32474 = VECTOR('',#32475,1.); +#32475 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#32476 = PCURVE('',#31144,#32477); +#32477 = DEFINITIONAL_REPRESENTATION('',(#32478),#32482); +#32478 = LINE('',#32479,#32480); +#32479 = CARTESIAN_POINT('',(-0.332659657565,-0.58421032799)); +#32480 = VECTOR('',#32481,1.); +#32481 = DIRECTION('',(0.,1.)); +#32482 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32483 = PCURVE('',#32484,#32489); +#32484 = PLANE('',#32485); +#32485 = AXIS2_PLACEMENT_3D('',#32486,#32487,#32488); +#32486 = CARTESIAN_POINT('',(3.,0.84,0.2)); +#32487 = DIRECTION('',(0.,0.,-1.)); +#32488 = DIRECTION('',(-1.,-2.22044604925E-16,-0.)); +#32489 = DEFINITIONAL_REPRESENTATION('',(#32490),#32494); +#32490 = LINE('',#32491,#32492); +#32491 = CARTESIAN_POINT('',(-0.,0.)); +#32492 = VECTOR('',#32493,1.); +#32493 = DIRECTION('',(1.,0.)); +#32494 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32495 = ORIENTED_EDGE('',*,*,#32496,.T.); +#32496 = EDGE_CURVE('',#32469,#32497,#32499,.T.); +#32497 = VERTEX_POINT('',#32498); +#32498 = CARTESIAN_POINT('',(2.55,0.84,0.3)); +#32499 = SURFACE_CURVE('',#32500,(#32505,#32516),.PCURVE_S1.); +#32500 = CIRCLE('',#32501,0.1); +#32501 = AXIS2_PLACEMENT_3D('',#32502,#32503,#32504); +#32502 = CARTESIAN_POINT('',(2.65,0.84,0.3)); +#32503 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#32504 = DIRECTION('',(0.,0.,-1.)); +#32505 = PCURVE('',#31144,#32506); +#32506 = DEFINITIONAL_REPRESENTATION('',(#32507),#32515); +#32507 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#32508,#32509,#32510,#32511 + ,#32512,#32513,#32514),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#32508 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#32509 = CARTESIAN_POINT('',(-0.332659657565,-6.100524723311E-02)); +#32510 = CARTESIAN_POINT('',(-0.182659657565,-0.147607787612)); +#32511 = CARTESIAN_POINT('',(-3.2659657565E-02,-0.23421032799)); +#32512 = CARTESIAN_POINT('',(-0.182659657565,-0.320812868368)); +#32513 = CARTESIAN_POINT('',(-0.332659657565,-0.407415408747)); +#32514 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#32515 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32516 = PCURVE('',#32517,#32522); +#32517 = CYLINDRICAL_SURFACE('',#32518,0.1); +#32518 = AXIS2_PLACEMENT_3D('',#32519,#32520,#32521); +#32519 = CARTESIAN_POINT('',(2.65,0.84,0.3)); +#32520 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#32521 = DIRECTION('',(0.,0.,-1.)); +#32522 = DEFINITIONAL_REPRESENTATION('',(#32523),#32527); +#32523 = LINE('',#32524,#32525); +#32524 = CARTESIAN_POINT('',(0.,0.)); +#32525 = VECTOR('',#32526,1.); +#32526 = DIRECTION('',(1.,0.)); +#32527 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32528 = ORIENTED_EDGE('',*,*,#32529,.T.); +#32529 = EDGE_CURVE('',#32497,#32530,#32532,.T.); +#32530 = VERTEX_POINT('',#32531); +#32531 = CARTESIAN_POINT('',(2.55,0.84,0.725)); +#32532 = SURFACE_CURVE('',#32533,(#32537,#32544),.PCURVE_S1.); +#32533 = LINE('',#32534,#32535); +#32534 = CARTESIAN_POINT('',(2.55,0.84,0.3)); +#32535 = VECTOR('',#32536,1.); +#32536 = DIRECTION('',(0.,0.,1.)); +#32537 = PCURVE('',#31144,#32538); +#32538 = DEFINITIONAL_REPRESENTATION('',(#32539),#32543); +#32539 = LINE('',#32540,#32541); +#32540 = CARTESIAN_POINT('',(-0.232659657565,-0.13421032799)); +#32541 = VECTOR('',#32542,1.); +#32542 = DIRECTION('',(1.,0.)); +#32543 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32544 = PCURVE('',#32545,#32550); +#32545 = PLANE('',#32546); +#32546 = AXIS2_PLACEMENT_3D('',#32547,#32548,#32549); +#32547 = CARTESIAN_POINT('',(2.55,0.84,0.3)); +#32548 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#32549 = DIRECTION('',(0.,0.,1.)); +#32550 = DEFINITIONAL_REPRESENTATION('',(#32551),#32555); +#32551 = LINE('',#32552,#32553); +#32552 = CARTESIAN_POINT('',(0.,0.)); +#32553 = VECTOR('',#32554,1.); +#32554 = DIRECTION('',(1.,0.)); +#32555 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32556 = ORIENTED_EDGE('',*,*,#32557,.T.); +#32557 = EDGE_CURVE('',#32530,#32558,#32560,.T.); +#32558 = VERTEX_POINT('',#32559); +#32559 = CARTESIAN_POINT('',(2.25,0.84,1.025)); +#32560 = SURFACE_CURVE('',#32561,(#32566,#32573),.PCURVE_S1.); +#32561 = CIRCLE('',#32562,0.3); +#32562 = AXIS2_PLACEMENT_3D('',#32563,#32564,#32565); +#32563 = CARTESIAN_POINT('',(2.25,0.84,0.725)); +#32564 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#32565 = DIRECTION('',(1.,2.22044604925E-16,3.700743415417E-16)); +#32566 = PCURVE('',#31144,#32567); +#32567 = DEFINITIONAL_REPRESENTATION('',(#32568),#32572); +#32568 = CIRCLE('',#32569,0.3); +#32569 = AXIS2_PLACEMENT_2D('',#32570,#32571); +#32570 = CARTESIAN_POINT('',(0.192340342435,0.16578967201)); +#32571 = DIRECTION('',(3.700743415417E-16,-1.)); +#32572 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32573 = PCURVE('',#32574,#32579); +#32574 = CYLINDRICAL_SURFACE('',#32575,0.3); +#32575 = AXIS2_PLACEMENT_3D('',#32576,#32577,#32578); +#32576 = CARTESIAN_POINT('',(2.25,0.84,0.725)); +#32577 = DIRECTION('',(-2.22044604925E-16,1.,-0.)); +#32578 = DIRECTION('',(1.,2.22044604925E-16,3.700743415417E-16)); +#32579 = DEFINITIONAL_REPRESENTATION('',(#32580),#32584); +#32580 = LINE('',#32581,#32582); +#32581 = CARTESIAN_POINT('',(6.28318530718,0.)); +#32582 = VECTOR('',#32583,1.); +#32583 = DIRECTION('',(-1.,0.)); +#32584 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32585 = ORIENTED_EDGE('',*,*,#32586,.T.); +#32586 = EDGE_CURVE('',#32558,#31129,#32587,.T.); +#32587 = SURFACE_CURVE('',#32588,(#32592,#32599),.PCURVE_S1.); +#32588 = LINE('',#32589,#32590); +#32589 = CARTESIAN_POINT('',(2.25,0.84,1.025)); +#32590 = VECTOR('',#32591,1.); +#32591 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#32592 = PCURVE('',#31144,#32593); +#32593 = DEFINITIONAL_REPRESENTATION('',(#32594),#32598); +#32594 = LINE('',#32595,#32596); +#32595 = CARTESIAN_POINT('',(0.492340342435,0.16578967201)); +#32596 = VECTOR('',#32597,1.); +#32597 = DIRECTION('',(0.,1.)); +#32598 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32599 = PCURVE('',#32083,#32600); +#32600 = DEFINITIONAL_REPRESENTATION('',(#32601),#32605); +#32601 = LINE('',#32602,#32603); +#32602 = CARTESIAN_POINT('',(-0.,0.)); +#32603 = VECTOR('',#32604,1.); +#32604 = DIRECTION('',(1.,0.)); +#32605 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32606 = ADVANCED_FACE('',(#32607),#31347,.F.); +#32607 = FACE_BOUND('',#32608,.F.); +#32608 = EDGE_LOOP('',(#32609,#32610,#32611,#32634)); +#32609 = ORIENTED_EDGE('',*,*,#31333,.T.); +#32610 = ORIENTED_EDGE('',*,*,#31386,.T.); +#32611 = ORIENTED_EDGE('',*,*,#32612,.F.); +#32612 = EDGE_CURVE('',#32613,#31364,#32615,.T.); +#32613 = VERTEX_POINT('',#32614); +#32614 = CARTESIAN_POINT('',(-1.775,2.45,0.825)); +#32615 = SURFACE_CURVE('',#32616,(#32620,#32627),.PCURVE_S1.); +#32616 = LINE('',#32617,#32618); +#32617 = CARTESIAN_POINT('',(-1.775,2.45,0.825)); +#32618 = VECTOR('',#32619,1.); +#32619 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#32620 = PCURVE('',#31347,#32621); +#32621 = DEFINITIONAL_REPRESENTATION('',(#32622),#32626); +#32622 = LINE('',#32623,#32624); +#32623 = CARTESIAN_POINT('',(2.176640215269E-17,1.)); +#32624 = VECTOR('',#32625,1.); +#32625 = DIRECTION('',(1.,3.127388801761E-17)); +#32626 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32627 = PCURVE('',#31982,#32628); +#32628 = DEFINITIONAL_REPRESENTATION('',(#32629),#32633); +#32629 = LINE('',#32630,#32631); +#32630 = CARTESIAN_POINT('',(0.,-0.2)); +#32631 = VECTOR('',#32632,1.); +#32632 = DIRECTION('',(1.,0.)); +#32633 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32634 = ORIENTED_EDGE('',*,*,#32635,.F.); +#32635 = EDGE_CURVE('',#31183,#32613,#32636,.T.); +#32636 = SURFACE_CURVE('',#32637,(#32640,#32647),.PCURVE_S1.); +#32637 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#32638,#32639),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#32638 = CARTESIAN_POINT('',(-1.717585640382,2.335171280765,0.1)); +#32639 = CARTESIAN_POINT('',(-1.775,2.45,0.825)); +#32640 = PCURVE('',#31347,#32641); +#32641 = DEFINITIONAL_REPRESENTATION('',(#32642),#32646); +#32642 = LINE('',#32643,#32644); +#32643 = CARTESIAN_POINT('',(2.867682730149E-16,-3.386432460304E-17)); +#32644 = VECTOR('',#32645,1.); +#32645 = DIRECTION('',(-2.650018708623E-16,1.)); +#32646 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32647 = PCURVE('',#31198,#32648); +#32648 = DEFINITIONAL_REPRESENTATION('',(#32649),#32653); +#32649 = LINE('',#32650,#32651); +#32650 = CARTESIAN_POINT('',(0.247487373415,-1.18030267204E-16)); +#32651 = VECTOR('',#32652,1.); +#32652 = DIRECTION('',(1.110223024625E-16,1.)); +#32653 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32654 = ADVANCED_FACE('',(#32655),#31279,.F.); +#32655 = FACE_BOUND('',#32656,.F.); +#32656 = EDGE_LOOP('',(#32657,#32658,#32680,#32706)); +#32657 = ORIENTED_EDGE('',*,*,#31263,.T.); +#32658 = ORIENTED_EDGE('',*,*,#32659,.T.); +#32659 = EDGE_CURVE('',#31237,#32660,#32662,.T.); +#32660 = VERTEX_POINT('',#32661); +#32661 = CARTESIAN_POINT('',(-1.775,-2.45,0.825)); +#32662 = SURFACE_CURVE('',#32663,(#32666,#32673),.PCURVE_S1.); +#32663 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#32664,#32665),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#32664 = CARTESIAN_POINT('',(-1.717585640382,-2.335171280765,0.1)); +#32665 = CARTESIAN_POINT('',(-1.775,-2.45,0.825)); +#32666 = PCURVE('',#31279,#32667); +#32667 = DEFINITIONAL_REPRESENTATION('',(#32668),#32672); +#32668 = LINE('',#32669,#32670); +#32669 = CARTESIAN_POINT('',(3.55,-1.234009040003E-16)); +#32670 = VECTOR('',#32671,1.); +#32671 = DIRECTION('',(0.,1.)); +#32672 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32673 = PCURVE('',#31252,#32674); +#32674 = DEFINITIONAL_REPRESENTATION('',(#32675),#32679); +#32675 = LINE('',#32676,#32677); +#32676 = CARTESIAN_POINT('',(-6.316502332661E-16,2.905068403496E-17)); +#32677 = VECTOR('',#32678,1.); +#32678 = DIRECTION('',(3.710816018575E-16,1.)); +#32679 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32680 = ORIENTED_EDGE('',*,*,#32681,.F.); +#32681 = EDGE_CURVE('',#31411,#32660,#32682,.T.); +#32682 = SURFACE_CURVE('',#32683,(#32687,#32694),.PCURVE_S1.); +#32683 = LINE('',#32684,#32685); +#32684 = CARTESIAN_POINT('',(1.775,-2.45,0.825)); +#32685 = VECTOR('',#32686,1.); +#32686 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#32687 = PCURVE('',#31279,#32688); +#32688 = DEFINITIONAL_REPRESENTATION('',(#32689),#32693); +#32689 = LINE('',#32690,#32691); +#32690 = CARTESIAN_POINT('',(2.176640215269E-17,1.)); +#32691 = VECTOR('',#32692,1.); +#32692 = DIRECTION('',(1.,3.127388801761E-17)); +#32693 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32694 = PCURVE('',#32695,#32700); +#32695 = PLANE('',#32696); +#32696 = AXIS2_PLACEMENT_3D('',#32697,#32698,#32699); +#32697 = CARTESIAN_POINT('',(1.775,-2.45,1.025)); +#32698 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#32699 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#32700 = DEFINITIONAL_REPRESENTATION('',(#32701),#32705); +#32701 = LINE('',#32702,#32703); +#32702 = CARTESIAN_POINT('',(-0.,-0.2)); +#32703 = VECTOR('',#32704,1.); +#32704 = DIRECTION('',(1.,0.)); +#32705 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32706 = ORIENTED_EDGE('',*,*,#31410,.F.); +#32707 = ADVANCED_FACE('',(#32708),#31252,.F.); +#32708 = FACE_BOUND('',#32709,.F.); +#32709 = EDGE_LOOP('',(#32710,#32711,#32733,#32759)); +#32710 = ORIENTED_EDGE('',*,*,#31236,.T.); +#32711 = ORIENTED_EDGE('',*,*,#32712,.T.); +#32712 = EDGE_CURVE('',#31210,#32713,#32715,.T.); +#32713 = VERTEX_POINT('',#32714); +#32714 = CARTESIAN_POINT('',(-1.95,-2.275,0.825)); +#32715 = SURFACE_CURVE('',#32716,(#32719,#32726),.PCURVE_S1.); +#32716 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#32717,#32718),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#32717 = CARTESIAN_POINT('',(-1.835171280765,-2.217585640382,0.1)); +#32718 = CARTESIAN_POINT('',(-1.95,-2.275,0.825)); +#32719 = PCURVE('',#31252,#32720); +#32720 = DEFINITIONAL_REPRESENTATION('',(#32721),#32725); +#32721 = LINE('',#32722,#32723); +#32722 = CARTESIAN_POINT('',(0.247487373415,-8.182109435701E-18)); +#32723 = VECTOR('',#32724,1.); +#32724 = DIRECTION('',(6.106226635438E-16,1.)); +#32725 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32726 = PCURVE('',#31225,#32727); +#32727 = DEFINITIONAL_REPRESENTATION('',(#32728),#32732); +#32728 = LINE('',#32729,#32730); +#32729 = CARTESIAN_POINT('',(-4.94827695417E-16,-2.662846262169E-17)); +#32730 = VECTOR('',#32731,1.); +#32731 = DIRECTION('',(6.052250384456E-16,1.)); +#32732 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32733 = ORIENTED_EDGE('',*,*,#32734,.F.); +#32734 = EDGE_CURVE('',#32660,#32713,#32735,.T.); +#32735 = SURFACE_CURVE('',#32736,(#32740,#32747),.PCURVE_S1.); +#32736 = LINE('',#32737,#32738); +#32737 = CARTESIAN_POINT('',(-1.775,-2.45,0.825)); +#32738 = VECTOR('',#32739,1.); +#32739 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#32740 = PCURVE('',#31252,#32741); +#32741 = DEFINITIONAL_REPRESENTATION('',(#32742),#32746); +#32742 = LINE('',#32743,#32744); +#32743 = CARTESIAN_POINT('',(5.057693122531E-17,1.)); +#32744 = VECTOR('',#32745,1.); +#32745 = DIRECTION('',(1.,0.)); +#32746 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32747 = PCURVE('',#32748,#32753); +#32748 = PLANE('',#32749); +#32749 = AXIS2_PLACEMENT_3D('',#32750,#32751,#32752); +#32750 = CARTESIAN_POINT('',(-1.775,-2.45,1.025)); +#32751 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#32752 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#32753 = DEFINITIONAL_REPRESENTATION('',(#32754),#32758); +#32754 = LINE('',#32755,#32756); +#32755 = CARTESIAN_POINT('',(0.,-0.2)); +#32756 = VECTOR('',#32757,1.); +#32757 = DIRECTION('',(1.,0.)); +#32758 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32759 = ORIENTED_EDGE('',*,*,#32659,.F.); +#32760 = ADVANCED_FACE('',(#32761),#31225,.F.); +#32761 = FACE_BOUND('',#32762,.F.); +#32762 = EDGE_LOOP('',(#32763,#32764,#32786,#32814,#32842,#32870,#32898, + #32926,#32954,#32982,#33010,#33036)); +#32763 = ORIENTED_EDGE('',*,*,#31209,.T.); +#32764 = ORIENTED_EDGE('',*,*,#32765,.T.); +#32765 = EDGE_CURVE('',#31181,#32766,#32768,.T.); +#32766 = VERTEX_POINT('',#32767); +#32767 = CARTESIAN_POINT('',(-1.95,2.275,0.825)); +#32768 = SURFACE_CURVE('',#32769,(#32772,#32779),.PCURVE_S1.); +#32769 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#32770,#32771),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#32770 = CARTESIAN_POINT('',(-1.835171280765,2.217585640382,0.1)); +#32771 = CARTESIAN_POINT('',(-1.95,2.275,0.825)); +#32772 = PCURVE('',#31225,#32773); +#32773 = DEFINITIONAL_REPRESENTATION('',(#32774),#32778); +#32774 = LINE('',#32775,#32776); +#32775 = CARTESIAN_POINT('',(4.55,-9.333496124434E-18)); +#32776 = VECTOR('',#32777,1.); +#32777 = DIRECTION('',(0.,1.)); +#32778 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32779 = PCURVE('',#31198,#32780); +#32780 = DEFINITIONAL_REPRESENTATION('',(#32781),#32785); +#32781 = LINE('',#32782,#32783); +#32782 = CARTESIAN_POINT('',(2.992756715082E-16,-4.171445780772E-17)); +#32783 = VECTOR('',#32784,1.); +#32784 = DIRECTION('',(-8.858060589813E-17,1.)); +#32785 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32786 = ORIENTED_EDGE('',*,*,#32787,.F.); +#32787 = EDGE_CURVE('',#32788,#32766,#32790,.T.); +#32788 = VERTEX_POINT('',#32789); +#32789 = CARTESIAN_POINT('',(-1.95,2.11,0.825)); +#32790 = SURFACE_CURVE('',#32791,(#32795,#32802),.PCURVE_S1.); +#32791 = LINE('',#32792,#32793); +#32792 = CARTESIAN_POINT('',(-1.95,-2.275,0.825)); +#32793 = VECTOR('',#32794,1.); +#32794 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#32795 = PCURVE('',#31225,#32796); +#32796 = DEFINITIONAL_REPRESENTATION('',(#32797),#32801); +#32797 = LINE('',#32798,#32799); +#32798 = CARTESIAN_POINT('',(8.881784197001E-16,1.)); +#32799 = VECTOR('',#32800,1.); +#32800 = DIRECTION('',(1.,0.)); +#32801 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32802 = PCURVE('',#32803,#32808); +#32803 = PLANE('',#32804); +#32804 = AXIS2_PLACEMENT_3D('',#32805,#32806,#32807); +#32805 = CARTESIAN_POINT('',(-1.95,-2.275,1.025)); +#32806 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#32807 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#32808 = DEFINITIONAL_REPRESENTATION('',(#32809),#32813); +#32809 = LINE('',#32810,#32811); +#32810 = CARTESIAN_POINT('',(0.,-0.2)); +#32811 = VECTOR('',#32812,1.); +#32812 = DIRECTION('',(1.,0.)); +#32813 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32814 = ORIENTED_EDGE('',*,*,#32815,.F.); +#32815 = EDGE_CURVE('',#32816,#32788,#32818,.T.); +#32816 = VERTEX_POINT('',#32817); +#32817 = CARTESIAN_POINT('',(-1.95,1.7,0.825)); +#32818 = SURFACE_CURVE('',#32819,(#32823,#32830),.PCURVE_S1.); +#32819 = LINE('',#32820,#32821); +#32820 = CARTESIAN_POINT('',(-1.95,-2.275,0.825)); +#32821 = VECTOR('',#32822,1.); +#32822 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#32823 = PCURVE('',#31225,#32824); +#32824 = DEFINITIONAL_REPRESENTATION('',(#32825),#32829); +#32825 = LINE('',#32826,#32827); +#32826 = CARTESIAN_POINT('',(4.440892098501E-16,1.)); +#32827 = VECTOR('',#32828,1.); +#32828 = DIRECTION('',(1.,0.)); +#32829 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32830 = PCURVE('',#32831,#32836); +#32831 = PLANE('',#32832); +#32832 = AXIS2_PLACEMENT_3D('',#32833,#32834,#32835); +#32833 = CARTESIAN_POINT('',(-1.8,1.7,0.825)); +#32834 = DIRECTION('',(0.,0.,1.)); +#32835 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#32836 = DEFINITIONAL_REPRESENTATION('',(#32837),#32841); +#32837 = LINE('',#32838,#32839); +#32838 = CARTESIAN_POINT('',(0.15,3.975)); +#32839 = VECTOR('',#32840,1.); +#32840 = DIRECTION('',(1.224646799147E-16,-1.)); +#32841 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32842 = ORIENTED_EDGE('',*,*,#32843,.F.); +#32843 = EDGE_CURVE('',#32844,#32816,#32846,.T.); +#32844 = VERTEX_POINT('',#32845); +#32845 = CARTESIAN_POINT('',(-1.95,0.84,0.825)); +#32846 = SURFACE_CURVE('',#32847,(#32851,#32858),.PCURVE_S1.); +#32847 = LINE('',#32848,#32849); +#32848 = CARTESIAN_POINT('',(-1.95,-2.275,0.825)); +#32849 = VECTOR('',#32850,1.); +#32850 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#32851 = PCURVE('',#31225,#32852); +#32852 = DEFINITIONAL_REPRESENTATION('',(#32853),#32857); +#32853 = LINE('',#32854,#32855); +#32854 = CARTESIAN_POINT('',(4.440892098501E-16,1.)); +#32855 = VECTOR('',#32856,1.); +#32856 = DIRECTION('',(1.,0.)); +#32857 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32858 = PCURVE('',#32859,#32864); +#32859 = PLANE('',#32860); +#32860 = AXIS2_PLACEMENT_3D('',#32861,#32862,#32863); +#32861 = CARTESIAN_POINT('',(-1.95,-2.275,1.025)); +#32862 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#32863 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#32864 = DEFINITIONAL_REPRESENTATION('',(#32865),#32869); +#32865 = LINE('',#32866,#32867); +#32866 = CARTESIAN_POINT('',(0.,-0.2)); +#32867 = VECTOR('',#32868,1.); +#32868 = DIRECTION('',(1.,0.)); +#32869 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32870 = ORIENTED_EDGE('',*,*,#32871,.F.); +#32871 = EDGE_CURVE('',#32872,#32844,#32874,.T.); +#32872 = VERTEX_POINT('',#32873); +#32873 = CARTESIAN_POINT('',(-1.95,0.43,0.825)); +#32874 = SURFACE_CURVE('',#32875,(#32879,#32886),.PCURVE_S1.); +#32875 = LINE('',#32876,#32877); +#32876 = CARTESIAN_POINT('',(-1.95,-2.275,0.825)); +#32877 = VECTOR('',#32878,1.); +#32878 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#32879 = PCURVE('',#31225,#32880); +#32880 = DEFINITIONAL_REPRESENTATION('',(#32881),#32885); +#32881 = LINE('',#32882,#32883); +#32882 = CARTESIAN_POINT('',(4.440892098501E-16,1.)); +#32883 = VECTOR('',#32884,1.); +#32884 = DIRECTION('',(1.,-5.415722071342E-16)); +#32885 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32886 = PCURVE('',#32887,#32892); +#32887 = PLANE('',#32888); +#32888 = AXIS2_PLACEMENT_3D('',#32889,#32890,#32891); +#32889 = CARTESIAN_POINT('',(-1.8,0.43,0.825)); +#32890 = DIRECTION('',(0.,0.,1.)); +#32891 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#32892 = DEFINITIONAL_REPRESENTATION('',(#32893),#32897); +#32893 = LINE('',#32894,#32895); +#32894 = CARTESIAN_POINT('',(0.15,2.705)); +#32895 = VECTOR('',#32896,1.); +#32896 = DIRECTION('',(1.224646799147E-16,-1.)); +#32897 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32898 = ORIENTED_EDGE('',*,*,#32899,.F.); +#32899 = EDGE_CURVE('',#32900,#32872,#32902,.T.); +#32900 = VERTEX_POINT('',#32901); +#32901 = CARTESIAN_POINT('',(-1.95,-0.43,0.825)); +#32902 = SURFACE_CURVE('',#32903,(#32907,#32914),.PCURVE_S1.); +#32903 = LINE('',#32904,#32905); +#32904 = CARTESIAN_POINT('',(-1.95,-2.275,0.825)); +#32905 = VECTOR('',#32906,1.); +#32906 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#32907 = PCURVE('',#31225,#32908); +#32908 = DEFINITIONAL_REPRESENTATION('',(#32909),#32913); +#32909 = LINE('',#32910,#32911); +#32910 = CARTESIAN_POINT('',(2.22044604925E-16,1.)); +#32911 = VECTOR('',#32912,1.); +#32912 = DIRECTION('',(1.,0.)); +#32913 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32914 = PCURVE('',#32915,#32920); +#32915 = PLANE('',#32916); +#32916 = AXIS2_PLACEMENT_3D('',#32917,#32918,#32919); +#32917 = CARTESIAN_POINT('',(-1.95,-2.275,1.025)); +#32918 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#32919 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#32920 = DEFINITIONAL_REPRESENTATION('',(#32921),#32925); +#32921 = LINE('',#32922,#32923); +#32922 = CARTESIAN_POINT('',(0.,-0.2)); +#32923 = VECTOR('',#32924,1.); +#32924 = DIRECTION('',(1.,0.)); +#32925 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32926 = ORIENTED_EDGE('',*,*,#32927,.F.); +#32927 = EDGE_CURVE('',#32928,#32900,#32930,.T.); +#32928 = VERTEX_POINT('',#32929); +#32929 = CARTESIAN_POINT('',(-1.95,-0.84,0.825)); +#32930 = SURFACE_CURVE('',#32931,(#32935,#32942),.PCURVE_S1.); +#32931 = LINE('',#32932,#32933); +#32932 = CARTESIAN_POINT('',(-1.95,-2.275,0.825)); +#32933 = VECTOR('',#32934,1.); +#32934 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#32935 = PCURVE('',#31225,#32936); +#32936 = DEFINITIONAL_REPRESENTATION('',(#32937),#32941); +#32937 = LINE('',#32938,#32939); +#32938 = CARTESIAN_POINT('',(2.22044604925E-16,1.)); +#32939 = VECTOR('',#32940,1.); +#32940 = DIRECTION('',(1.,5.415722071342E-16)); +#32941 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32942 = PCURVE('',#32943,#32948); +#32943 = PLANE('',#32944); +#32944 = AXIS2_PLACEMENT_3D('',#32945,#32946,#32947); +#32945 = CARTESIAN_POINT('',(-1.8,-0.84,0.825)); +#32946 = DIRECTION('',(0.,0.,1.)); +#32947 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#32948 = DEFINITIONAL_REPRESENTATION('',(#32949),#32953); +#32949 = LINE('',#32950,#32951); +#32950 = CARTESIAN_POINT('',(0.15,1.435)); +#32951 = VECTOR('',#32952,1.); +#32952 = DIRECTION('',(1.224646799147E-16,-1.)); +#32953 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32954 = ORIENTED_EDGE('',*,*,#32955,.F.); +#32955 = EDGE_CURVE('',#32956,#32928,#32958,.T.); +#32956 = VERTEX_POINT('',#32957); +#32957 = CARTESIAN_POINT('',(-1.95,-1.7,0.825)); +#32958 = SURFACE_CURVE('',#32959,(#32963,#32970),.PCURVE_S1.); +#32959 = LINE('',#32960,#32961); +#32960 = CARTESIAN_POINT('',(-1.95,-2.275,0.825)); +#32961 = VECTOR('',#32962,1.); +#32962 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#32963 = PCURVE('',#31225,#32964); +#32964 = DEFINITIONAL_REPRESENTATION('',(#32965),#32969); +#32965 = LINE('',#32966,#32967); +#32966 = CARTESIAN_POINT('',(0.,1.)); +#32967 = VECTOR('',#32968,1.); +#32968 = DIRECTION('',(1.,0.)); +#32969 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32970 = PCURVE('',#32971,#32976); +#32971 = PLANE('',#32972); +#32972 = AXIS2_PLACEMENT_3D('',#32973,#32974,#32975); +#32973 = CARTESIAN_POINT('',(-1.95,-2.275,1.025)); +#32974 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#32975 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#32976 = DEFINITIONAL_REPRESENTATION('',(#32977),#32981); +#32977 = LINE('',#32978,#32979); +#32978 = CARTESIAN_POINT('',(0.,-0.2)); +#32979 = VECTOR('',#32980,1.); +#32980 = DIRECTION('',(1.,0.)); +#32981 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32982 = ORIENTED_EDGE('',*,*,#32983,.F.); +#32983 = EDGE_CURVE('',#32984,#32956,#32986,.T.); +#32984 = VERTEX_POINT('',#32985); +#32985 = CARTESIAN_POINT('',(-1.95,-2.11,0.825)); +#32986 = SURFACE_CURVE('',#32987,(#32991,#32998),.PCURVE_S1.); +#32987 = LINE('',#32988,#32989); +#32988 = CARTESIAN_POINT('',(-1.95,-2.275,0.825)); +#32989 = VECTOR('',#32990,1.); +#32990 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#32991 = PCURVE('',#31225,#32992); +#32992 = DEFINITIONAL_REPRESENTATION('',(#32993),#32997); +#32993 = LINE('',#32994,#32995); +#32994 = CARTESIAN_POINT('',(1.665334536938E-16,1.)); +#32995 = VECTOR('',#32996,1.); +#32996 = DIRECTION('',(1.,2.707861035671E-16)); +#32997 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#32998 = PCURVE('',#32999,#33004); +#32999 = PLANE('',#33000); +#33000 = AXIS2_PLACEMENT_3D('',#33001,#33002,#33003); +#33001 = CARTESIAN_POINT('',(-1.8,-2.11,0.825)); +#33002 = DIRECTION('',(0.,0.,1.)); +#33003 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#33004 = DEFINITIONAL_REPRESENTATION('',(#33005),#33009); +#33005 = LINE('',#33006,#33007); +#33006 = CARTESIAN_POINT('',(0.15,0.165)); +#33007 = VECTOR('',#33008,1.); +#33008 = DIRECTION('',(1.224646799147E-16,-1.)); +#33009 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33010 = ORIENTED_EDGE('',*,*,#33011,.F.); +#33011 = EDGE_CURVE('',#32713,#32984,#33012,.T.); +#33012 = SURFACE_CURVE('',#33013,(#33017,#33024),.PCURVE_S1.); +#33013 = LINE('',#33014,#33015); +#33014 = CARTESIAN_POINT('',(-1.95,-2.275,0.825)); +#33015 = VECTOR('',#33016,1.); +#33016 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#33017 = PCURVE('',#31225,#33018); +#33018 = DEFINITIONAL_REPRESENTATION('',(#33019),#33023); +#33019 = LINE('',#33020,#33021); +#33020 = CARTESIAN_POINT('',(-3.364087759472E-16,1.)); +#33021 = VECTOR('',#33022,1.); +#33022 = DIRECTION('',(1.,0.)); +#33023 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33024 = PCURVE('',#33025,#33030); +#33025 = PLANE('',#33026); +#33026 = AXIS2_PLACEMENT_3D('',#33027,#33028,#33029); +#33027 = CARTESIAN_POINT('',(-1.95,-2.275,1.025)); +#33028 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#33029 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#33030 = DEFINITIONAL_REPRESENTATION('',(#33031),#33035); +#33031 = LINE('',#33032,#33033); +#33032 = CARTESIAN_POINT('',(0.,-0.2)); +#33033 = VECTOR('',#33034,1.); +#33034 = DIRECTION('',(1.,0.)); +#33035 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33036 = ORIENTED_EDGE('',*,*,#32712,.F.); +#33037 = ADVANCED_FACE('',(#33038),#31198,.F.); +#33038 = FACE_BOUND('',#33039,.F.); +#33039 = EDGE_LOOP('',(#33040,#33041,#33042,#33068)); +#33040 = ORIENTED_EDGE('',*,*,#31180,.T.); +#33041 = ORIENTED_EDGE('',*,*,#32635,.T.); +#33042 = ORIENTED_EDGE('',*,*,#33043,.F.); +#33043 = EDGE_CURVE('',#32766,#32613,#33044,.T.); +#33044 = SURFACE_CURVE('',#33045,(#33049,#33056),.PCURVE_S1.); +#33045 = LINE('',#33046,#33047); +#33046 = CARTESIAN_POINT('',(-1.95,2.275,0.825)); +#33047 = VECTOR('',#33048,1.); +#33048 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#33049 = PCURVE('',#31198,#33050); +#33050 = DEFINITIONAL_REPRESENTATION('',(#33051),#33055); +#33051 = LINE('',#33052,#33053); +#33052 = CARTESIAN_POINT('',(-1.061963552289E-16,1.)); +#33053 = VECTOR('',#33054,1.); +#33054 = DIRECTION('',(1.,0.)); +#33055 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33056 = PCURVE('',#33057,#33062); +#33057 = PLANE('',#33058); +#33058 = AXIS2_PLACEMENT_3D('',#33059,#33060,#33061); +#33059 = CARTESIAN_POINT('',(-1.95,2.275,1.025)); +#33060 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#33061 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#33062 = DEFINITIONAL_REPRESENTATION('',(#33063),#33067); +#33063 = LINE('',#33064,#33065); +#33064 = CARTESIAN_POINT('',(0.,-0.2)); +#33065 = VECTOR('',#33066,1.); +#33066 = DIRECTION('',(1.,0.)); +#33067 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33068 = ORIENTED_EDGE('',*,*,#32765,.F.); +#33069 = ADVANCED_FACE('',(#33070),#31446,.F.); +#33070 = FACE_BOUND('',#33071,.F.); +#33071 = EDGE_LOOP('',(#33072,#33073,#33093,#33119)); +#33072 = ORIENTED_EDGE('',*,*,#31432,.T.); +#33073 = ORIENTED_EDGE('',*,*,#33074,.T.); +#33074 = EDGE_CURVE('',#31411,#33075,#33077,.T.); +#33075 = VERTEX_POINT('',#33076); +#33076 = CARTESIAN_POINT('',(1.775,-2.45,1.025)); +#33077 = SURFACE_CURVE('',#33078,(#33081,#33087),.PCURVE_S1.); +#33078 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#33079,#33080),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#33079 = CARTESIAN_POINT('',(1.775,-2.45,0.825)); +#33080 = CARTESIAN_POINT('',(1.775,-2.45,1.025)); +#33081 = PCURVE('',#31446,#33082); +#33082 = DEFINITIONAL_REPRESENTATION('',(#33083),#33086); +#33083 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#33084,#33085),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#33084 = CARTESIAN_POINT('',(0.247487373415,-0.2)); +#33085 = CARTESIAN_POINT('',(0.247487373415,0.)); +#33086 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33087 = PCURVE('',#32695,#33088); +#33088 = DEFINITIONAL_REPRESENTATION('',(#33089),#33092); +#33089 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#33090,#33091),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#33090 = CARTESIAN_POINT('',(0.,-0.2)); +#33091 = CARTESIAN_POINT('',(0.,0.)); +#33092 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33093 = ORIENTED_EDGE('',*,*,#33094,.F.); +#33094 = EDGE_CURVE('',#31492,#33075,#33095,.T.); +#33095 = SURFACE_CURVE('',#33096,(#33100,#33107),.PCURVE_S1.); +#33096 = LINE('',#33097,#33098); +#33097 = CARTESIAN_POINT('',(1.95,-2.275,1.025)); +#33098 = VECTOR('',#33099,1.); +#33099 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#33100 = PCURVE('',#31446,#33101); +#33101 = DEFINITIONAL_REPRESENTATION('',(#33102),#33106); +#33102 = LINE('',#33103,#33104); +#33103 = CARTESIAN_POINT('',(0.,0.)); +#33104 = VECTOR('',#33105,1.); +#33105 = DIRECTION('',(1.,0.)); +#33106 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33107 = PCURVE('',#33108,#33113); +#33108 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#33109,#33110) + ,(#33111,#33112 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#33109 = CARTESIAN_POINT('',(1.95,-2.275,1.025)); +#33110 = CARTESIAN_POINT('',(1.875,-2.2375,1.025)); +#33111 = CARTESIAN_POINT('',(1.775,-2.45,1.025)); +#33112 = CARTESIAN_POINT('',(1.7375,-2.375,1.025)); +#33113 = DEFINITIONAL_REPRESENTATION('',(#33114),#33118); +#33114 = LINE('',#33115,#33116); +#33115 = CARTESIAN_POINT('',(2.508731586994E-16,-4.08400163074E-15)); +#33116 = VECTOR('',#33117,1.); +#33117 = DIRECTION('',(1.,7.990563855149E-15)); +#33118 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33119 = ORIENTED_EDGE('',*,*,#31491,.F.); +#33120 = ADVANCED_FACE('',(#33121),#31478,.T.); +#33121 = FACE_BOUND('',#33122,.T.); +#33122 = EDGE_LOOP('',(#33123,#33124,#33125,#33153,#33181,#33210,#33238, + #33266,#33294,#33327,#33355,#33384)); +#33123 = ORIENTED_EDGE('',*,*,#31462,.F.); +#33124 = ORIENTED_EDGE('',*,*,#31569,.T.); +#33125 = ORIENTED_EDGE('',*,*,#33126,.T.); +#33126 = EDGE_CURVE('',#31570,#33127,#33129,.T.); +#33127 = VERTEX_POINT('',#33128); +#33128 = CARTESIAN_POINT('',(2.35,-2.11,0.725)); +#33129 = SURFACE_CURVE('',#33130,(#33135,#33146),.PCURVE_S1.); +#33130 = CIRCLE('',#33131,0.1); +#33131 = AXIS2_PLACEMENT_3D('',#33132,#33133,#33134); +#33132 = CARTESIAN_POINT('',(2.25,-2.11,0.725)); +#33133 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#33134 = DIRECTION('',(4.440892098501E-15,9.860761315262E-31,1.)); +#33135 = PCURVE('',#31478,#33136); +#33136 = DEFINITIONAL_REPRESENTATION('',(#33137),#33145); +#33137 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#33138,#33139,#33140,#33141 + ,#33142,#33143,#33144),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#33138 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#33139 = CARTESIAN_POINT('',(0.292340342435,-7.415408746888E-03)); +#33140 = CARTESIAN_POINT('',(0.142340342435,7.918713163156E-02)); +#33141 = CARTESIAN_POINT('',(-7.659657565E-03,0.16578967201)); +#33142 = CARTESIAN_POINT('',(0.142340342435,0.252392212388)); +#33143 = CARTESIAN_POINT('',(0.292340342435,0.338994752767)); +#33144 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#33145 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33146 = PCURVE('',#31606,#33147); +#33147 = DEFINITIONAL_REPRESENTATION('',(#33148),#33152); +#33148 = LINE('',#33149,#33150); +#33149 = CARTESIAN_POINT('',(0.,-0.41)); +#33150 = VECTOR('',#33151,1.); +#33151 = DIRECTION('',(1.,0.)); +#33152 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33153 = ORIENTED_EDGE('',*,*,#33154,.T.); +#33154 = EDGE_CURVE('',#33127,#33155,#33157,.T.); +#33155 = VERTEX_POINT('',#33156); +#33156 = CARTESIAN_POINT('',(2.35,-2.11,0.3)); +#33157 = SURFACE_CURVE('',#33158,(#33162,#33169),.PCURVE_S1.); +#33158 = LINE('',#33159,#33160); +#33159 = CARTESIAN_POINT('',(2.35,-2.11,0.725)); +#33160 = VECTOR('',#33161,1.); +#33161 = DIRECTION('',(1.044915787883E-15,2.320179133003E-31,-1.)); +#33162 = PCURVE('',#31478,#33163); +#33163 = DEFINITIONAL_REPRESENTATION('',(#33164),#33168); +#33164 = LINE('',#33165,#33166); +#33165 = CARTESIAN_POINT('',(0.192340342435,6.578967201E-02)); +#33166 = VECTOR('',#33167,1.); +#33167 = DIRECTION('',(-1.,-1.044915787883E-15)); +#33168 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33169 = PCURVE('',#33170,#33175); +#33170 = PLANE('',#33171); +#33171 = AXIS2_PLACEMENT_3D('',#33172,#33173,#33174); +#33172 = CARTESIAN_POINT('',(2.35,-1.7,0.725)); +#33173 = DIRECTION('',(1.,2.22044604925E-16,1.044915787883E-15)); +#33174 = DIRECTION('',(1.044915787883E-15,2.320179133003E-31,-1.)); +#33175 = DEFINITIONAL_REPRESENTATION('',(#33176),#33180); +#33176 = LINE('',#33177,#33178); +#33177 = CARTESIAN_POINT('',(-9.512734445312E-32,-0.41)); +#33178 = VECTOR('',#33179,1.); +#33179 = DIRECTION('',(1.,0.)); +#33180 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33181 = ORIENTED_EDGE('',*,*,#33182,.T.); +#33182 = EDGE_CURVE('',#33155,#33183,#33185,.T.); +#33183 = VERTEX_POINT('',#33184); +#33184 = CARTESIAN_POINT('',(2.65,-2.11,5.551115123126E-17)); +#33185 = SURFACE_CURVE('',#33186,(#33191,#33198),.PCURVE_S1.); +#33186 = CIRCLE('',#33187,0.3); +#33187 = AXIS2_PLACEMENT_3D('',#33188,#33189,#33190); +#33188 = CARTESIAN_POINT('',(2.65,-2.11,0.3)); +#33189 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#33190 = DIRECTION('',(-1.,-2.22044604925E-16,3.515706244646E-15)); +#33191 = PCURVE('',#31478,#33192); +#33192 = DEFINITIONAL_REPRESENTATION('',(#33193),#33197); +#33193 = CIRCLE('',#33194,0.3); +#33194 = AXIS2_PLACEMENT_2D('',#33195,#33196); +#33195 = CARTESIAN_POINT('',(-0.232659657565,-0.23421032799)); +#33196 = DIRECTION('',(3.515706244646E-15,1.)); +#33197 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33198 = PCURVE('',#33199,#33204); +#33199 = CYLINDRICAL_SURFACE('',#33200,0.3); +#33200 = AXIS2_PLACEMENT_3D('',#33201,#33202,#33203); +#33201 = CARTESIAN_POINT('',(2.65,-1.7,0.3)); +#33202 = DIRECTION('',(-2.22044604925E-16,1.,-0.)); +#33203 = DIRECTION('',(-1.,-2.22044604925E-16,3.515706244646E-15)); +#33204 = DEFINITIONAL_REPRESENTATION('',(#33205),#33209); +#33205 = LINE('',#33206,#33207); +#33206 = CARTESIAN_POINT('',(6.28318530718,-0.41)); +#33207 = VECTOR('',#33208,1.); +#33208 = DIRECTION('',(-1.,0.)); +#33209 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33210 = ORIENTED_EDGE('',*,*,#33211,.T.); +#33211 = EDGE_CURVE('',#33183,#33212,#33214,.T.); +#33212 = VERTEX_POINT('',#33213); +#33213 = CARTESIAN_POINT('',(3.,-2.11,5.551115123126E-17)); +#33214 = SURFACE_CURVE('',#33215,(#33219,#33226),.PCURVE_S1.); +#33215 = LINE('',#33216,#33217); +#33216 = CARTESIAN_POINT('',(2.65,-2.11,5.551115123126E-17)); +#33217 = VECTOR('',#33218,1.); +#33218 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#33219 = PCURVE('',#31478,#33220); +#33220 = DEFINITIONAL_REPRESENTATION('',(#33221),#33225); +#33221 = LINE('',#33222,#33223); +#33222 = CARTESIAN_POINT('',(-0.532659657565,-0.23421032799)); +#33223 = VECTOR('',#33224,1.); +#33224 = DIRECTION('',(0.,-1.)); +#33225 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33226 = PCURVE('',#33227,#33232); +#33227 = PLANE('',#33228); +#33228 = AXIS2_PLACEMENT_3D('',#33229,#33230,#33231); +#33229 = CARTESIAN_POINT('',(2.65,-1.7,5.551115123126E-17)); +#33230 = DIRECTION('',(0.,0.,1.)); +#33231 = DIRECTION('',(1.,2.22044604925E-16,-0.)); +#33232 = DEFINITIONAL_REPRESENTATION('',(#33233),#33237); +#33233 = LINE('',#33234,#33235); +#33234 = CARTESIAN_POINT('',(-9.103828801925E-17,-0.41)); +#33235 = VECTOR('',#33236,1.); +#33236 = DIRECTION('',(1.,0.)); +#33237 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33238 = ORIENTED_EDGE('',*,*,#33239,.T.); +#33239 = EDGE_CURVE('',#33212,#33240,#33242,.T.); +#33240 = VERTEX_POINT('',#33241); +#33241 = CARTESIAN_POINT('',(3.,-2.11,0.2)); +#33242 = SURFACE_CURVE('',#33243,(#33247,#33254),.PCURVE_S1.); +#33243 = LINE('',#33244,#33245); +#33244 = CARTESIAN_POINT('',(3.,-2.11,5.551115123126E-17)); +#33245 = VECTOR('',#33246,1.); +#33246 = DIRECTION('',(0.,0.,1.)); +#33247 = PCURVE('',#31478,#33248); +#33248 = DEFINITIONAL_REPRESENTATION('',(#33249),#33253); +#33249 = LINE('',#33250,#33251); +#33250 = CARTESIAN_POINT('',(-0.532659657565,-0.58421032799)); +#33251 = VECTOR('',#33252,1.); +#33252 = DIRECTION('',(1.,0.)); +#33253 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33254 = PCURVE('',#33255,#33260); +#33255 = PLANE('',#33256); +#33256 = AXIS2_PLACEMENT_3D('',#33257,#33258,#33259); +#33257 = CARTESIAN_POINT('',(3.,-1.7,5.551115123126E-17)); +#33258 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#33259 = DIRECTION('',(0.,0.,1.)); +#33260 = DEFINITIONAL_REPRESENTATION('',(#33261),#33265); +#33261 = LINE('',#33262,#33263); +#33262 = CARTESIAN_POINT('',(0.,-0.41)); +#33263 = VECTOR('',#33264,1.); +#33264 = DIRECTION('',(1.,0.)); +#33265 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33266 = ORIENTED_EDGE('',*,*,#33267,.T.); +#33267 = EDGE_CURVE('',#33240,#33268,#33270,.T.); +#33268 = VERTEX_POINT('',#33269); +#33269 = CARTESIAN_POINT('',(2.65,-2.11,0.2)); +#33270 = SURFACE_CURVE('',#33271,(#33275,#33282),.PCURVE_S1.); +#33271 = LINE('',#33272,#33273); +#33272 = CARTESIAN_POINT('',(3.,-2.11,0.2)); +#33273 = VECTOR('',#33274,1.); +#33274 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#33275 = PCURVE('',#31478,#33276); +#33276 = DEFINITIONAL_REPRESENTATION('',(#33277),#33281); +#33277 = LINE('',#33278,#33279); +#33278 = CARTESIAN_POINT('',(-0.332659657565,-0.58421032799)); +#33279 = VECTOR('',#33280,1.); +#33280 = DIRECTION('',(0.,1.)); +#33281 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33282 = PCURVE('',#33283,#33288); +#33283 = PLANE('',#33284); +#33284 = AXIS2_PLACEMENT_3D('',#33285,#33286,#33287); +#33285 = CARTESIAN_POINT('',(3.,-1.7,0.2)); +#33286 = DIRECTION('',(0.,0.,-1.)); +#33287 = DIRECTION('',(-1.,-2.22044604925E-16,-0.)); +#33288 = DEFINITIONAL_REPRESENTATION('',(#33289),#33293); +#33289 = LINE('',#33290,#33291); +#33290 = CARTESIAN_POINT('',(9.103828801925E-17,-0.41)); +#33291 = VECTOR('',#33292,1.); +#33292 = DIRECTION('',(1.,0.)); +#33293 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33294 = ORIENTED_EDGE('',*,*,#33295,.T.); +#33295 = EDGE_CURVE('',#33268,#33296,#33298,.T.); +#33296 = VERTEX_POINT('',#33297); +#33297 = CARTESIAN_POINT('',(2.55,-2.11,0.3)); +#33298 = SURFACE_CURVE('',#33299,(#33304,#33315),.PCURVE_S1.); +#33299 = CIRCLE('',#33300,0.1); +#33300 = AXIS2_PLACEMENT_3D('',#33301,#33302,#33303); +#33301 = CARTESIAN_POINT('',(2.65,-2.11,0.3)); +#33302 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#33303 = DIRECTION('',(0.,0.,-1.)); +#33304 = PCURVE('',#31478,#33305); +#33305 = DEFINITIONAL_REPRESENTATION('',(#33306),#33314); +#33306 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#33307,#33308,#33309,#33310 + ,#33311,#33312,#33313),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#33307 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#33308 = CARTESIAN_POINT('',(-0.332659657565,-6.100524723311E-02)); +#33309 = CARTESIAN_POINT('',(-0.182659657565,-0.147607787612)); +#33310 = CARTESIAN_POINT('',(-3.2659657565E-02,-0.23421032799)); +#33311 = CARTESIAN_POINT('',(-0.182659657565,-0.320812868368)); +#33312 = CARTESIAN_POINT('',(-0.332659657565,-0.407415408747)); +#33313 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#33314 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33315 = PCURVE('',#33316,#33321); +#33316 = CYLINDRICAL_SURFACE('',#33317,0.1); +#33317 = AXIS2_PLACEMENT_3D('',#33318,#33319,#33320); +#33318 = CARTESIAN_POINT('',(2.65,-1.7,0.3)); +#33319 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#33320 = DIRECTION('',(0.,0.,-1.)); +#33321 = DEFINITIONAL_REPRESENTATION('',(#33322),#33326); +#33322 = LINE('',#33323,#33324); +#33323 = CARTESIAN_POINT('',(0.,-0.41)); +#33324 = VECTOR('',#33325,1.); +#33325 = DIRECTION('',(1.,0.)); +#33326 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33327 = ORIENTED_EDGE('',*,*,#33328,.T.); +#33328 = EDGE_CURVE('',#33296,#33329,#33331,.T.); +#33329 = VERTEX_POINT('',#33330); +#33330 = CARTESIAN_POINT('',(2.55,-2.11,0.725)); +#33331 = SURFACE_CURVE('',#33332,(#33336,#33343),.PCURVE_S1.); +#33332 = LINE('',#33333,#33334); +#33333 = CARTESIAN_POINT('',(2.55,-2.11,0.3)); +#33334 = VECTOR('',#33335,1.); +#33335 = DIRECTION('',(0.,0.,1.)); +#33336 = PCURVE('',#31478,#33337); +#33337 = DEFINITIONAL_REPRESENTATION('',(#33338),#33342); +#33338 = LINE('',#33339,#33340); +#33339 = CARTESIAN_POINT('',(-0.232659657565,-0.13421032799)); +#33340 = VECTOR('',#33341,1.); +#33341 = DIRECTION('',(1.,0.)); +#33342 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33343 = PCURVE('',#33344,#33349); +#33344 = PLANE('',#33345); +#33345 = AXIS2_PLACEMENT_3D('',#33346,#33347,#33348); +#33346 = CARTESIAN_POINT('',(2.55,-1.7,0.3)); +#33347 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#33348 = DIRECTION('',(0.,0.,1.)); +#33349 = DEFINITIONAL_REPRESENTATION('',(#33350),#33354); +#33350 = LINE('',#33351,#33352); +#33351 = CARTESIAN_POINT('',(0.,-0.41)); +#33352 = VECTOR('',#33353,1.); +#33353 = DIRECTION('',(1.,0.)); +#33354 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33355 = ORIENTED_EDGE('',*,*,#33356,.T.); +#33356 = EDGE_CURVE('',#33329,#33357,#33359,.T.); +#33357 = VERTEX_POINT('',#33358); +#33358 = CARTESIAN_POINT('',(2.25,-2.11,1.025)); +#33359 = SURFACE_CURVE('',#33360,(#33365,#33372),.PCURVE_S1.); +#33360 = CIRCLE('',#33361,0.3); +#33361 = AXIS2_PLACEMENT_3D('',#33362,#33363,#33364); +#33362 = CARTESIAN_POINT('',(2.25,-2.11,0.725)); +#33363 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#33364 = DIRECTION('',(1.,2.22044604925E-16,3.700743415417E-16)); +#33365 = PCURVE('',#31478,#33366); +#33366 = DEFINITIONAL_REPRESENTATION('',(#33367),#33371); +#33367 = CIRCLE('',#33368,0.3); +#33368 = AXIS2_PLACEMENT_2D('',#33369,#33370); +#33369 = CARTESIAN_POINT('',(0.192340342435,0.16578967201)); +#33370 = DIRECTION('',(3.700743415417E-16,-1.)); +#33371 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33372 = PCURVE('',#33373,#33378); +#33373 = CYLINDRICAL_SURFACE('',#33374,0.3); +#33374 = AXIS2_PLACEMENT_3D('',#33375,#33376,#33377); +#33375 = CARTESIAN_POINT('',(2.25,-1.7,0.725)); +#33376 = DIRECTION('',(-2.22044604925E-16,1.,-0.)); +#33377 = DIRECTION('',(1.,2.22044604925E-16,3.700743415417E-16)); +#33378 = DEFINITIONAL_REPRESENTATION('',(#33379),#33383); +#33379 = LINE('',#33380,#33381); +#33380 = CARTESIAN_POINT('',(6.28318530718,-0.41)); +#33381 = VECTOR('',#33382,1.); +#33382 = DIRECTION('',(-1.,0.)); +#33383 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33384 = ORIENTED_EDGE('',*,*,#33385,.T.); +#33385 = EDGE_CURVE('',#33357,#31463,#33386,.T.); +#33386 = SURFACE_CURVE('',#33387,(#33391,#33398),.PCURVE_S1.); +#33387 = LINE('',#33388,#33389); +#33388 = CARTESIAN_POINT('',(2.25,-2.11,1.025)); +#33389 = VECTOR('',#33390,1.); +#33390 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#33391 = PCURVE('',#31478,#33392); +#33392 = DEFINITIONAL_REPRESENTATION('',(#33393),#33397); +#33393 = LINE('',#33394,#33395); +#33394 = CARTESIAN_POINT('',(0.492340342435,0.16578967201)); +#33395 = VECTOR('',#33396,1.); +#33396 = DIRECTION('',(0.,1.)); +#33397 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33398 = PCURVE('',#32183,#33399); +#33399 = DEFINITIONAL_REPRESENTATION('',(#33400),#33404); +#33400 = LINE('',#33401,#33402); +#33401 = CARTESIAN_POINT('',(9.103828801925E-17,-0.41)); +#33402 = VECTOR('',#33403,1.); +#33403 = DIRECTION('',(1.,0.)); +#33404 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33405 = ADVANCED_FACE('',(#33406),#31525,.F.); +#33406 = FACE_BOUND('',#33407,.F.); +#33407 = EDGE_LOOP('',(#33408,#33451,#33452,#33472)); +#33408 = ORIENTED_EDGE('',*,*,#33409,.F.); +#33409 = EDGE_CURVE('',#31463,#32168,#33410,.T.); +#33410 = SURFACE_CURVE('',#33411,(#33415,#33444),.PCURVE_S1.); +#33411 = LINE('',#33412,#33413); +#33412 = CARTESIAN_POINT('',(2.25,-2.11,1.025)); +#33413 = VECTOR('',#33414,1.); +#33414 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#33415 = PCURVE('',#31525,#33416); +#33416 = DEFINITIONAL_REPRESENTATION('',(#33417),#33443); +#33417 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#33418,#33419,#33420,#33421, + #33422,#33423,#33424,#33425,#33426,#33427,#33428,#33429,#33430, + #33431,#33432,#33433,#33434,#33435,#33436,#33437,#33438,#33439, + #33440,#33441,#33442),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1 + ,1,1,1,1,1,1,1,1,1,1,4),(0.3,0.303409090909,0.306818181818, + 0.310227272727,0.313636363636,0.317045454545,0.320454545455, + 0.323863636364,0.327272727273,0.330681818182,0.334090909091,0.3375, + 0.340909090909,0.344318181818,0.347727272727,0.351136363636, + 0.354545454545,0.357954545455,0.361363636364,0.364772727273, + 0.368181818182,0.371590909091,0.375),.QUASI_UNIFORM_KNOTS.); +#33418 = CARTESIAN_POINT('',(4.385,0.)); +#33419 = CARTESIAN_POINT('',(4.385526973028,1.515151515152E-02)); +#33420 = CARTESIAN_POINT('',(4.38658170875,4.545454545455E-02)); +#33421 = CARTESIAN_POINT('',(4.388166186677,9.090909090909E-02)); +#33422 = CARTESIAN_POINT('',(4.389753044293,0.136363636364)); +#33423 = CARTESIAN_POINT('',(4.391342286965,0.181818181818)); +#33424 = CARTESIAN_POINT('',(4.392933920073,0.227272727273)); +#33425 = CARTESIAN_POINT('',(4.394527949014,0.272727272727)); +#33426 = CARTESIAN_POINT('',(4.396124379203,0.318181818182)); +#33427 = CARTESIAN_POINT('',(4.39772321607,0.363636363636)); +#33428 = CARTESIAN_POINT('',(4.39932446506,0.409090909091)); +#33429 = CARTESIAN_POINT('',(4.400928131636,0.454545454545)); +#33430 = CARTESIAN_POINT('',(4.402534221279,0.5)); +#33431 = CARTESIAN_POINT('',(4.404142739482,0.545454545455)); +#33432 = CARTESIAN_POINT('',(4.40575369176,0.590909090909)); +#33433 = CARTESIAN_POINT('',(4.407367083641,0.636363636364)); +#33434 = CARTESIAN_POINT('',(4.408982920672,0.681818181818)); +#33435 = CARTESIAN_POINT('',(4.410601208414,0.727272727273)); +#33436 = CARTESIAN_POINT('',(4.412221952448,0.772727272727)); +#33437 = CARTESIAN_POINT('',(4.41384515837,0.818181818182)); +#33438 = CARTESIAN_POINT('',(4.415470831794,0.863636363636)); +#33439 = CARTESIAN_POINT('',(4.417098978351,0.909090909091)); +#33440 = CARTESIAN_POINT('',(4.418729603687,0.954545454545)); +#33441 = CARTESIAN_POINT('',(4.419818343544,0.984848484848)); +#33442 = CARTESIAN_POINT('',(4.420363128492,1.)); +#33443 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33444 = PCURVE('',#32183,#33445); +#33445 = DEFINITIONAL_REPRESENTATION('',(#33446),#33450); +#33446 = LINE('',#33447,#33448); +#33447 = CARTESIAN_POINT('',(9.103828801925E-17,-0.41)); +#33448 = VECTOR('',#33449,1.); +#33449 = DIRECTION('',(1.,0.)); +#33450 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33451 = ORIENTED_EDGE('',*,*,#31511,.T.); +#33452 = ORIENTED_EDGE('',*,*,#33453,.T.); +#33453 = EDGE_CURVE('',#31492,#32196,#33454,.T.); +#33454 = SURFACE_CURVE('',#33455,(#33458,#33465),.PCURVE_S1.); +#33455 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#33456,#33457),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#33456 = CARTESIAN_POINT('',(1.95,-2.275,1.025)); +#33457 = CARTESIAN_POINT('',(1.875,-2.2375,1.025)); +#33458 = PCURVE('',#31525,#33459); +#33459 = DEFINITIONAL_REPRESENTATION('',(#33460),#33464); +#33460 = LINE('',#33461,#33462); +#33461 = CARTESIAN_POINT('',(4.55,6.640843479731E-16)); +#33462 = VECTOR('',#33463,1.); +#33463 = DIRECTION('',(-8.881784197001E-16,1.)); +#33464 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33465 = PCURVE('',#33108,#33466); +#33466 = DEFINITIONAL_REPRESENTATION('',(#33467),#33471); +#33467 = LINE('',#33468,#33469); +#33468 = CARTESIAN_POINT('',(2.508731586994E-16,-4.08400163074E-15)); +#33469 = VECTOR('',#33470,1.); +#33470 = DIRECTION('',(2.93758077062E-16,1.)); +#33471 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33472 = ORIENTED_EDGE('',*,*,#32195,.F.); +#33473 = ADVANCED_FACE('',(#33474),#31556,.F.); +#33474 = FACE_BOUND('',#33475,.F.); +#33475 = EDGE_LOOP('',(#33476,#33477,#33478,#33506,#33529,#33553,#33576, + #33599,#33622,#33650,#33673,#33697)); +#33476 = ORIENTED_EDGE('',*,*,#31650,.F.); +#33477 = ORIENTED_EDGE('',*,*,#31540,.T.); +#33478 = ORIENTED_EDGE('',*,*,#33479,.T.); +#33479 = EDGE_CURVE('',#31541,#33480,#33482,.T.); +#33480 = VERTEX_POINT('',#33481); +#33481 = CARTESIAN_POINT('',(2.35,-1.7,0.725)); +#33482 = SURFACE_CURVE('',#33483,(#33488,#33499),.PCURVE_S1.); +#33483 = CIRCLE('',#33484,0.1); +#33484 = AXIS2_PLACEMENT_3D('',#33485,#33486,#33487); +#33485 = CARTESIAN_POINT('',(2.25,-1.7,0.725)); +#33486 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#33487 = DIRECTION('',(4.440892098501E-15,9.860761315262E-31,1.)); +#33488 = PCURVE('',#31556,#33489); +#33489 = DEFINITIONAL_REPRESENTATION('',(#33490),#33498); +#33490 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#33491,#33492,#33493,#33494 + ,#33495,#33496,#33497),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#33491 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#33492 = CARTESIAN_POINT('',(0.292340342435,-7.415408746888E-03)); +#33493 = CARTESIAN_POINT('',(0.142340342435,7.918713163156E-02)); +#33494 = CARTESIAN_POINT('',(-7.659657565E-03,0.16578967201)); +#33495 = CARTESIAN_POINT('',(0.142340342435,0.252392212388)); +#33496 = CARTESIAN_POINT('',(0.292340342435,0.338994752767)); +#33497 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#33498 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33499 = PCURVE('',#31606,#33500); +#33500 = DEFINITIONAL_REPRESENTATION('',(#33501),#33505); +#33501 = LINE('',#33502,#33503); +#33502 = CARTESIAN_POINT('',(0.,0.)); +#33503 = VECTOR('',#33504,1.); +#33504 = DIRECTION('',(1.,0.)); +#33505 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33506 = ORIENTED_EDGE('',*,*,#33507,.T.); +#33507 = EDGE_CURVE('',#33480,#33508,#33510,.T.); +#33508 = VERTEX_POINT('',#33509); +#33509 = CARTESIAN_POINT('',(2.35,-1.7,0.3)); +#33510 = SURFACE_CURVE('',#33511,(#33515,#33522),.PCURVE_S1.); +#33511 = LINE('',#33512,#33513); +#33512 = CARTESIAN_POINT('',(2.35,-1.7,0.725)); +#33513 = VECTOR('',#33514,1.); +#33514 = DIRECTION('',(1.044915787883E-15,2.320179133003E-31,-1.)); +#33515 = PCURVE('',#31556,#33516); +#33516 = DEFINITIONAL_REPRESENTATION('',(#33517),#33521); +#33517 = LINE('',#33518,#33519); +#33518 = CARTESIAN_POINT('',(0.192340342435,6.578967201E-02)); +#33519 = VECTOR('',#33520,1.); +#33520 = DIRECTION('',(-1.,-1.044915787883E-15)); +#33521 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33522 = PCURVE('',#33170,#33523); +#33523 = DEFINITIONAL_REPRESENTATION('',(#33524),#33528); +#33524 = LINE('',#33525,#33526); +#33525 = CARTESIAN_POINT('',(0.,0.)); +#33526 = VECTOR('',#33527,1.); +#33527 = DIRECTION('',(1.,0.)); +#33528 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33529 = ORIENTED_EDGE('',*,*,#33530,.T.); +#33530 = EDGE_CURVE('',#33508,#33531,#33533,.T.); +#33531 = VERTEX_POINT('',#33532); +#33532 = CARTESIAN_POINT('',(2.65,-1.7,5.551115123126E-17)); +#33533 = SURFACE_CURVE('',#33534,(#33539,#33546),.PCURVE_S1.); +#33534 = CIRCLE('',#33535,0.3); +#33535 = AXIS2_PLACEMENT_3D('',#33536,#33537,#33538); +#33536 = CARTESIAN_POINT('',(2.65,-1.7,0.3)); +#33537 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#33538 = DIRECTION('',(-1.,-2.22044604925E-16,3.515706244646E-15)); +#33539 = PCURVE('',#31556,#33540); +#33540 = DEFINITIONAL_REPRESENTATION('',(#33541),#33545); +#33541 = CIRCLE('',#33542,0.3); +#33542 = AXIS2_PLACEMENT_2D('',#33543,#33544); +#33543 = CARTESIAN_POINT('',(-0.232659657565,-0.23421032799)); +#33544 = DIRECTION('',(3.515706244646E-15,1.)); +#33545 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33546 = PCURVE('',#33199,#33547); +#33547 = DEFINITIONAL_REPRESENTATION('',(#33548),#33552); +#33548 = LINE('',#33549,#33550); +#33549 = CARTESIAN_POINT('',(6.28318530718,2.22044604925E-16)); +#33550 = VECTOR('',#33551,1.); +#33551 = DIRECTION('',(-1.,-1.413579858428E-16)); +#33552 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33553 = ORIENTED_EDGE('',*,*,#33554,.T.); +#33554 = EDGE_CURVE('',#33531,#33555,#33557,.T.); +#33555 = VERTEX_POINT('',#33556); +#33556 = CARTESIAN_POINT('',(3.,-1.7,5.551115123126E-17)); +#33557 = SURFACE_CURVE('',#33558,(#33562,#33569),.PCURVE_S1.); +#33558 = LINE('',#33559,#33560); +#33559 = CARTESIAN_POINT('',(2.65,-1.7,5.551115123126E-17)); +#33560 = VECTOR('',#33561,1.); +#33561 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#33562 = PCURVE('',#31556,#33563); +#33563 = DEFINITIONAL_REPRESENTATION('',(#33564),#33568); +#33564 = LINE('',#33565,#33566); +#33565 = CARTESIAN_POINT('',(-0.532659657565,-0.23421032799)); +#33566 = VECTOR('',#33567,1.); +#33567 = DIRECTION('',(0.,-1.)); +#33568 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33569 = PCURVE('',#33227,#33570); +#33570 = DEFINITIONAL_REPRESENTATION('',(#33571),#33575); +#33571 = LINE('',#33572,#33573); +#33572 = CARTESIAN_POINT('',(0.,0.)); +#33573 = VECTOR('',#33574,1.); +#33574 = DIRECTION('',(1.,0.)); +#33575 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33576 = ORIENTED_EDGE('',*,*,#33577,.T.); +#33577 = EDGE_CURVE('',#33555,#33578,#33580,.T.); +#33578 = VERTEX_POINT('',#33579); +#33579 = CARTESIAN_POINT('',(3.,-1.7,0.2)); +#33580 = SURFACE_CURVE('',#33581,(#33585,#33592),.PCURVE_S1.); +#33581 = LINE('',#33582,#33583); +#33582 = CARTESIAN_POINT('',(3.,-1.7,5.551115123126E-17)); +#33583 = VECTOR('',#33584,1.); +#33584 = DIRECTION('',(0.,0.,1.)); +#33585 = PCURVE('',#31556,#33586); +#33586 = DEFINITIONAL_REPRESENTATION('',(#33587),#33591); +#33587 = LINE('',#33588,#33589); +#33588 = CARTESIAN_POINT('',(-0.532659657565,-0.58421032799)); +#33589 = VECTOR('',#33590,1.); +#33590 = DIRECTION('',(1.,0.)); +#33591 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33592 = PCURVE('',#33255,#33593); +#33593 = DEFINITIONAL_REPRESENTATION('',(#33594),#33598); +#33594 = LINE('',#33595,#33596); +#33595 = CARTESIAN_POINT('',(0.,0.)); +#33596 = VECTOR('',#33597,1.); +#33597 = DIRECTION('',(1.,0.)); +#33598 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33599 = ORIENTED_EDGE('',*,*,#33600,.T.); +#33600 = EDGE_CURVE('',#33578,#33601,#33603,.T.); +#33601 = VERTEX_POINT('',#33602); +#33602 = CARTESIAN_POINT('',(2.65,-1.7,0.2)); +#33603 = SURFACE_CURVE('',#33604,(#33608,#33615),.PCURVE_S1.); +#33604 = LINE('',#33605,#33606); +#33605 = CARTESIAN_POINT('',(3.,-1.7,0.2)); +#33606 = VECTOR('',#33607,1.); +#33607 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#33608 = PCURVE('',#31556,#33609); +#33609 = DEFINITIONAL_REPRESENTATION('',(#33610),#33614); +#33610 = LINE('',#33611,#33612); +#33611 = CARTESIAN_POINT('',(-0.332659657565,-0.58421032799)); +#33612 = VECTOR('',#33613,1.); +#33613 = DIRECTION('',(0.,1.)); +#33614 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33615 = PCURVE('',#33283,#33616); +#33616 = DEFINITIONAL_REPRESENTATION('',(#33617),#33621); +#33617 = LINE('',#33618,#33619); +#33618 = CARTESIAN_POINT('',(-0.,0.)); +#33619 = VECTOR('',#33620,1.); +#33620 = DIRECTION('',(1.,0.)); +#33621 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33622 = ORIENTED_EDGE('',*,*,#33623,.T.); +#33623 = EDGE_CURVE('',#33601,#33624,#33626,.T.); +#33624 = VERTEX_POINT('',#33625); +#33625 = CARTESIAN_POINT('',(2.55,-1.7,0.3)); +#33626 = SURFACE_CURVE('',#33627,(#33632,#33643),.PCURVE_S1.); +#33627 = CIRCLE('',#33628,0.1); +#33628 = AXIS2_PLACEMENT_3D('',#33629,#33630,#33631); +#33629 = CARTESIAN_POINT('',(2.65,-1.7,0.3)); +#33630 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#33631 = DIRECTION('',(0.,0.,-1.)); +#33632 = PCURVE('',#31556,#33633); +#33633 = DEFINITIONAL_REPRESENTATION('',(#33634),#33642); +#33634 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#33635,#33636,#33637,#33638 + ,#33639,#33640,#33641),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#33635 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#33636 = CARTESIAN_POINT('',(-0.332659657565,-6.100524723311E-02)); +#33637 = CARTESIAN_POINT('',(-0.182659657565,-0.147607787612)); +#33638 = CARTESIAN_POINT('',(-3.2659657565E-02,-0.23421032799)); +#33639 = CARTESIAN_POINT('',(-0.182659657565,-0.320812868368)); +#33640 = CARTESIAN_POINT('',(-0.332659657565,-0.407415408747)); +#33641 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#33642 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33643 = PCURVE('',#33316,#33644); +#33644 = DEFINITIONAL_REPRESENTATION('',(#33645),#33649); +#33645 = LINE('',#33646,#33647); +#33646 = CARTESIAN_POINT('',(0.,0.)); +#33647 = VECTOR('',#33648,1.); +#33648 = DIRECTION('',(1.,0.)); +#33649 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33650 = ORIENTED_EDGE('',*,*,#33651,.T.); +#33651 = EDGE_CURVE('',#33624,#33652,#33654,.T.); +#33652 = VERTEX_POINT('',#33653); +#33653 = CARTESIAN_POINT('',(2.55,-1.7,0.725)); +#33654 = SURFACE_CURVE('',#33655,(#33659,#33666),.PCURVE_S1.); +#33655 = LINE('',#33656,#33657); +#33656 = CARTESIAN_POINT('',(2.55,-1.7,0.3)); +#33657 = VECTOR('',#33658,1.); +#33658 = DIRECTION('',(0.,0.,1.)); +#33659 = PCURVE('',#31556,#33660); +#33660 = DEFINITIONAL_REPRESENTATION('',(#33661),#33665); +#33661 = LINE('',#33662,#33663); +#33662 = CARTESIAN_POINT('',(-0.232659657565,-0.13421032799)); +#33663 = VECTOR('',#33664,1.); +#33664 = DIRECTION('',(1.,0.)); +#33665 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33666 = PCURVE('',#33344,#33667); +#33667 = DEFINITIONAL_REPRESENTATION('',(#33668),#33672); +#33668 = LINE('',#33669,#33670); +#33669 = CARTESIAN_POINT('',(0.,0.)); +#33670 = VECTOR('',#33671,1.); +#33671 = DIRECTION('',(1.,0.)); +#33672 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33673 = ORIENTED_EDGE('',*,*,#33674,.T.); +#33674 = EDGE_CURVE('',#33652,#33675,#33677,.T.); +#33675 = VERTEX_POINT('',#33676); +#33676 = CARTESIAN_POINT('',(2.25,-1.7,1.025)); +#33677 = SURFACE_CURVE('',#33678,(#33683,#33690),.PCURVE_S1.); +#33678 = CIRCLE('',#33679,0.3); +#33679 = AXIS2_PLACEMENT_3D('',#33680,#33681,#33682); +#33680 = CARTESIAN_POINT('',(2.25,-1.7,0.725)); +#33681 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#33682 = DIRECTION('',(1.,2.22044604925E-16,3.700743415417E-16)); +#33683 = PCURVE('',#31556,#33684); +#33684 = DEFINITIONAL_REPRESENTATION('',(#33685),#33689); +#33685 = CIRCLE('',#33686,0.3); +#33686 = AXIS2_PLACEMENT_2D('',#33687,#33688); +#33687 = CARTESIAN_POINT('',(0.192340342435,0.16578967201)); +#33688 = DIRECTION('',(3.700743415417E-16,-1.)); +#33689 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33690 = PCURVE('',#33373,#33691); +#33691 = DEFINITIONAL_REPRESENTATION('',(#33692),#33696); +#33692 = LINE('',#33693,#33694); +#33693 = CARTESIAN_POINT('',(6.28318530718,-2.22044604925E-16)); +#33694 = VECTOR('',#33695,1.); +#33695 = DIRECTION('',(-1.,1.413579858428E-16)); +#33696 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33697 = ORIENTED_EDGE('',*,*,#33698,.T.); +#33698 = EDGE_CURVE('',#33675,#31651,#33699,.T.); +#33699 = SURFACE_CURVE('',#33700,(#33704,#33711),.PCURVE_S1.); +#33700 = LINE('',#33701,#33702); +#33701 = CARTESIAN_POINT('',(2.25,-1.7,1.025)); +#33702 = VECTOR('',#33703,1.); +#33703 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#33704 = PCURVE('',#31556,#33705); +#33705 = DEFINITIONAL_REPRESENTATION('',(#33706),#33710); +#33706 = LINE('',#33707,#33708); +#33707 = CARTESIAN_POINT('',(0.492340342435,0.16578967201)); +#33708 = VECTOR('',#33709,1.); +#33709 = DIRECTION('',(0.,1.)); +#33710 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33711 = PCURVE('',#32183,#33712); +#33712 = DEFINITIONAL_REPRESENTATION('',(#33713),#33717); +#33713 = LINE('',#33714,#33715); +#33714 = CARTESIAN_POINT('',(-0.,0.)); +#33715 = VECTOR('',#33716,1.); +#33716 = DIRECTION('',(1.,0.)); +#33717 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33718 = ADVANCED_FACE('',(#33719),#31606,.F.); +#33719 = FACE_BOUND('',#33720,.F.); +#33720 = EDGE_LOOP('',(#33721,#33722,#33723,#33744)); +#33721 = ORIENTED_EDGE('',*,*,#31592,.T.); +#33722 = ORIENTED_EDGE('',*,*,#33126,.T.); +#33723 = ORIENTED_EDGE('',*,*,#33724,.F.); +#33724 = EDGE_CURVE('',#33480,#33127,#33725,.T.); +#33725 = SURFACE_CURVE('',#33726,(#33730,#33737),.PCURVE_S1.); +#33726 = LINE('',#33727,#33728); +#33727 = CARTESIAN_POINT('',(2.35,-1.7,0.725)); +#33728 = VECTOR('',#33729,1.); +#33729 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#33730 = PCURVE('',#31606,#33731); +#33731 = DEFINITIONAL_REPRESENTATION('',(#33732),#33736); +#33732 = LINE('',#33733,#33734); +#33733 = CARTESIAN_POINT('',(1.570796326795,0.)); +#33734 = VECTOR('',#33735,1.); +#33735 = DIRECTION('',(0.,-1.)); +#33736 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33737 = PCURVE('',#33170,#33738); +#33738 = DEFINITIONAL_REPRESENTATION('',(#33739),#33743); +#33739 = LINE('',#33740,#33741); +#33740 = CARTESIAN_POINT('',(0.,0.)); +#33741 = VECTOR('',#33742,1.); +#33742 = DIRECTION('',(7.584527938158E-44,-1.)); +#33743 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33744 = ORIENTED_EDGE('',*,*,#33479,.F.); +#33745 = ADVANCED_FACE('',(#33746),#31637,.T.); +#33746 = FACE_BOUND('',#33747,.T.); +#33747 = EDGE_LOOP('',(#33748,#33749,#33750,#33778,#33806,#33835,#33863, + #33891,#33919,#33952,#33980,#34009)); +#33748 = ORIENTED_EDGE('',*,*,#31621,.F.); +#33749 = ORIENTED_EDGE('',*,*,#31812,.T.); +#33750 = ORIENTED_EDGE('',*,*,#33751,.T.); +#33751 = EDGE_CURVE('',#31813,#33752,#33754,.T.); +#33752 = VERTEX_POINT('',#33753); +#33753 = CARTESIAN_POINT('',(2.35,-0.84,0.725)); +#33754 = SURFACE_CURVE('',#33755,(#33760,#33771),.PCURVE_S1.); +#33755 = CIRCLE('',#33756,0.1); +#33756 = AXIS2_PLACEMENT_3D('',#33757,#33758,#33759); +#33757 = CARTESIAN_POINT('',(2.25,-0.84,0.725)); +#33758 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#33759 = DIRECTION('',(4.440892098501E-15,9.860761315262E-31,1.)); +#33760 = PCURVE('',#31637,#33761); +#33761 = DEFINITIONAL_REPRESENTATION('',(#33762),#33770); +#33762 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#33763,#33764,#33765,#33766 + ,#33767,#33768,#33769),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#33763 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#33764 = CARTESIAN_POINT('',(0.292340342435,-7.415408746888E-03)); +#33765 = CARTESIAN_POINT('',(0.142340342435,7.918713163156E-02)); +#33766 = CARTESIAN_POINT('',(-7.659657565E-03,0.16578967201)); +#33767 = CARTESIAN_POINT('',(0.142340342435,0.252392212388)); +#33768 = CARTESIAN_POINT('',(0.292340342435,0.338994752767)); +#33769 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#33770 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33771 = PCURVE('',#31849,#33772); +#33772 = DEFINITIONAL_REPRESENTATION('',(#33773),#33777); +#33773 = LINE('',#33774,#33775); +#33774 = CARTESIAN_POINT('',(0.,-0.41)); +#33775 = VECTOR('',#33776,1.); +#33776 = DIRECTION('',(1.,-7.067899292141E-17)); +#33777 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33778 = ORIENTED_EDGE('',*,*,#33779,.T.); +#33779 = EDGE_CURVE('',#33752,#33780,#33782,.T.); +#33780 = VERTEX_POINT('',#33781); +#33781 = CARTESIAN_POINT('',(2.35,-0.84,0.3)); +#33782 = SURFACE_CURVE('',#33783,(#33787,#33794),.PCURVE_S1.); +#33783 = LINE('',#33784,#33785); +#33784 = CARTESIAN_POINT('',(2.35,-0.84,0.725)); +#33785 = VECTOR('',#33786,1.); +#33786 = DIRECTION('',(1.044915787883E-15,2.320179133003E-31,-1.)); +#33787 = PCURVE('',#31637,#33788); +#33788 = DEFINITIONAL_REPRESENTATION('',(#33789),#33793); +#33789 = LINE('',#33790,#33791); +#33790 = CARTESIAN_POINT('',(0.192340342435,6.578967201E-02)); +#33791 = VECTOR('',#33792,1.); +#33792 = DIRECTION('',(-1.,-1.044915787883E-15)); +#33793 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33794 = PCURVE('',#33795,#33800); +#33795 = PLANE('',#33796); +#33796 = AXIS2_PLACEMENT_3D('',#33797,#33798,#33799); +#33797 = CARTESIAN_POINT('',(2.35,-0.43,0.725)); +#33798 = DIRECTION('',(1.,2.22044604925E-16,1.044915787883E-15)); +#33799 = DIRECTION('',(1.044915787883E-15,2.320179133003E-31,-1.)); +#33800 = DEFINITIONAL_REPRESENTATION('',(#33801),#33805); +#33801 = LINE('',#33802,#33803); +#33802 = CARTESIAN_POINT('',(-9.512734445312E-32,-0.41)); +#33803 = VECTOR('',#33804,1.); +#33804 = DIRECTION('',(1.,0.)); +#33805 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33806 = ORIENTED_EDGE('',*,*,#33807,.T.); +#33807 = EDGE_CURVE('',#33780,#33808,#33810,.T.); +#33808 = VERTEX_POINT('',#33809); +#33809 = CARTESIAN_POINT('',(2.65,-0.84,5.551115123126E-17)); +#33810 = SURFACE_CURVE('',#33811,(#33816,#33823),.PCURVE_S1.); +#33811 = CIRCLE('',#33812,0.3); +#33812 = AXIS2_PLACEMENT_3D('',#33813,#33814,#33815); +#33813 = CARTESIAN_POINT('',(2.65,-0.84,0.3)); +#33814 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#33815 = DIRECTION('',(-1.,-2.22044604925E-16,3.515706244646E-15)); +#33816 = PCURVE('',#31637,#33817); +#33817 = DEFINITIONAL_REPRESENTATION('',(#33818),#33822); +#33818 = CIRCLE('',#33819,0.3); +#33819 = AXIS2_PLACEMENT_2D('',#33820,#33821); +#33820 = CARTESIAN_POINT('',(-0.232659657565,-0.23421032799)); +#33821 = DIRECTION('',(3.515706244646E-15,1.)); +#33822 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33823 = PCURVE('',#33824,#33829); +#33824 = CYLINDRICAL_SURFACE('',#33825,0.3); +#33825 = AXIS2_PLACEMENT_3D('',#33826,#33827,#33828); +#33826 = CARTESIAN_POINT('',(2.65,-0.43,0.3)); +#33827 = DIRECTION('',(-2.22044604925E-16,1.,-0.)); +#33828 = DIRECTION('',(-1.,-2.22044604925E-16,3.515706244646E-15)); +#33829 = DEFINITIONAL_REPRESENTATION('',(#33830),#33834); +#33830 = LINE('',#33831,#33832); +#33831 = CARTESIAN_POINT('',(6.28318530718,-0.41)); +#33832 = VECTOR('',#33833,1.); +#33833 = DIRECTION('',(-1.,7.067899292141E-17)); +#33834 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33835 = ORIENTED_EDGE('',*,*,#33836,.T.); +#33836 = EDGE_CURVE('',#33808,#33837,#33839,.T.); +#33837 = VERTEX_POINT('',#33838); +#33838 = CARTESIAN_POINT('',(3.,-0.84,5.551115123126E-17)); +#33839 = SURFACE_CURVE('',#33840,(#33844,#33851),.PCURVE_S1.); +#33840 = LINE('',#33841,#33842); +#33841 = CARTESIAN_POINT('',(2.65,-0.84,5.551115123126E-17)); +#33842 = VECTOR('',#33843,1.); +#33843 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#33844 = PCURVE('',#31637,#33845); +#33845 = DEFINITIONAL_REPRESENTATION('',(#33846),#33850); +#33846 = LINE('',#33847,#33848); +#33847 = CARTESIAN_POINT('',(-0.532659657565,-0.23421032799)); +#33848 = VECTOR('',#33849,1.); +#33849 = DIRECTION('',(0.,-1.)); +#33850 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33851 = PCURVE('',#33852,#33857); +#33852 = PLANE('',#33853); +#33853 = AXIS2_PLACEMENT_3D('',#33854,#33855,#33856); +#33854 = CARTESIAN_POINT('',(2.65,-0.43,5.551115123126E-17)); +#33855 = DIRECTION('',(0.,0.,1.)); +#33856 = DIRECTION('',(1.,2.22044604925E-16,-0.)); +#33857 = DEFINITIONAL_REPRESENTATION('',(#33858),#33862); +#33858 = LINE('',#33859,#33860); +#33859 = CARTESIAN_POINT('',(-9.103828801925E-17,-0.41)); +#33860 = VECTOR('',#33861,1.); +#33861 = DIRECTION('',(1.,0.)); +#33862 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33863 = ORIENTED_EDGE('',*,*,#33864,.T.); +#33864 = EDGE_CURVE('',#33837,#33865,#33867,.T.); +#33865 = VERTEX_POINT('',#33866); +#33866 = CARTESIAN_POINT('',(3.,-0.84,0.2)); +#33867 = SURFACE_CURVE('',#33868,(#33872,#33879),.PCURVE_S1.); +#33868 = LINE('',#33869,#33870); +#33869 = CARTESIAN_POINT('',(3.,-0.84,5.551115123126E-17)); +#33870 = VECTOR('',#33871,1.); +#33871 = DIRECTION('',(0.,0.,1.)); +#33872 = PCURVE('',#31637,#33873); +#33873 = DEFINITIONAL_REPRESENTATION('',(#33874),#33878); +#33874 = LINE('',#33875,#33876); +#33875 = CARTESIAN_POINT('',(-0.532659657565,-0.58421032799)); +#33876 = VECTOR('',#33877,1.); +#33877 = DIRECTION('',(1.,0.)); +#33878 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33879 = PCURVE('',#33880,#33885); +#33880 = PLANE('',#33881); +#33881 = AXIS2_PLACEMENT_3D('',#33882,#33883,#33884); +#33882 = CARTESIAN_POINT('',(3.,-0.43,5.551115123126E-17)); +#33883 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#33884 = DIRECTION('',(0.,0.,1.)); +#33885 = DEFINITIONAL_REPRESENTATION('',(#33886),#33890); +#33886 = LINE('',#33887,#33888); +#33887 = CARTESIAN_POINT('',(0.,-0.41)); +#33888 = VECTOR('',#33889,1.); +#33889 = DIRECTION('',(1.,0.)); +#33890 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33891 = ORIENTED_EDGE('',*,*,#33892,.T.); +#33892 = EDGE_CURVE('',#33865,#33893,#33895,.T.); +#33893 = VERTEX_POINT('',#33894); +#33894 = CARTESIAN_POINT('',(2.65,-0.84,0.2)); +#33895 = SURFACE_CURVE('',#33896,(#33900,#33907),.PCURVE_S1.); +#33896 = LINE('',#33897,#33898); +#33897 = CARTESIAN_POINT('',(3.,-0.84,0.2)); +#33898 = VECTOR('',#33899,1.); +#33899 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#33900 = PCURVE('',#31637,#33901); +#33901 = DEFINITIONAL_REPRESENTATION('',(#33902),#33906); +#33902 = LINE('',#33903,#33904); +#33903 = CARTESIAN_POINT('',(-0.332659657565,-0.58421032799)); +#33904 = VECTOR('',#33905,1.); +#33905 = DIRECTION('',(0.,1.)); +#33906 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33907 = PCURVE('',#33908,#33913); +#33908 = PLANE('',#33909); +#33909 = AXIS2_PLACEMENT_3D('',#33910,#33911,#33912); +#33910 = CARTESIAN_POINT('',(3.,-0.43,0.2)); +#33911 = DIRECTION('',(0.,0.,-1.)); +#33912 = DIRECTION('',(-1.,-2.22044604925E-16,-0.)); +#33913 = DEFINITIONAL_REPRESENTATION('',(#33914),#33918); +#33914 = LINE('',#33915,#33916); +#33915 = CARTESIAN_POINT('',(9.103828801925E-17,-0.41)); +#33916 = VECTOR('',#33917,1.); +#33917 = DIRECTION('',(1.,0.)); +#33918 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33919 = ORIENTED_EDGE('',*,*,#33920,.T.); +#33920 = EDGE_CURVE('',#33893,#33921,#33923,.T.); +#33921 = VERTEX_POINT('',#33922); +#33922 = CARTESIAN_POINT('',(2.55,-0.84,0.3)); +#33923 = SURFACE_CURVE('',#33924,(#33929,#33940),.PCURVE_S1.); +#33924 = CIRCLE('',#33925,0.1); +#33925 = AXIS2_PLACEMENT_3D('',#33926,#33927,#33928); +#33926 = CARTESIAN_POINT('',(2.65,-0.84,0.3)); +#33927 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#33928 = DIRECTION('',(0.,0.,-1.)); +#33929 = PCURVE('',#31637,#33930); +#33930 = DEFINITIONAL_REPRESENTATION('',(#33931),#33939); +#33931 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#33932,#33933,#33934,#33935 + ,#33936,#33937,#33938),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#33932 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#33933 = CARTESIAN_POINT('',(-0.332659657565,-6.100524723311E-02)); +#33934 = CARTESIAN_POINT('',(-0.182659657565,-0.147607787612)); +#33935 = CARTESIAN_POINT('',(-3.2659657565E-02,-0.23421032799)); +#33936 = CARTESIAN_POINT('',(-0.182659657565,-0.320812868368)); +#33937 = CARTESIAN_POINT('',(-0.332659657565,-0.407415408747)); +#33938 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#33939 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33940 = PCURVE('',#33941,#33946); +#33941 = CYLINDRICAL_SURFACE('',#33942,0.1); +#33942 = AXIS2_PLACEMENT_3D('',#33943,#33944,#33945); +#33943 = CARTESIAN_POINT('',(2.65,-0.43,0.3)); +#33944 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#33945 = DIRECTION('',(0.,0.,-1.)); +#33946 = DEFINITIONAL_REPRESENTATION('',(#33947),#33951); +#33947 = LINE('',#33948,#33949); +#33948 = CARTESIAN_POINT('',(0.,-0.41)); +#33949 = VECTOR('',#33950,1.); +#33950 = DIRECTION('',(1.,0.)); +#33951 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33952 = ORIENTED_EDGE('',*,*,#33953,.T.); +#33953 = EDGE_CURVE('',#33921,#33954,#33956,.T.); +#33954 = VERTEX_POINT('',#33955); +#33955 = CARTESIAN_POINT('',(2.55,-0.84,0.725)); +#33956 = SURFACE_CURVE('',#33957,(#33961,#33968),.PCURVE_S1.); +#33957 = LINE('',#33958,#33959); +#33958 = CARTESIAN_POINT('',(2.55,-0.84,0.3)); +#33959 = VECTOR('',#33960,1.); +#33960 = DIRECTION('',(0.,0.,1.)); +#33961 = PCURVE('',#31637,#33962); +#33962 = DEFINITIONAL_REPRESENTATION('',(#33963),#33967); +#33963 = LINE('',#33964,#33965); +#33964 = CARTESIAN_POINT('',(-0.232659657565,-0.13421032799)); +#33965 = VECTOR('',#33966,1.); +#33966 = DIRECTION('',(1.,0.)); +#33967 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33968 = PCURVE('',#33969,#33974); +#33969 = PLANE('',#33970); +#33970 = AXIS2_PLACEMENT_3D('',#33971,#33972,#33973); +#33971 = CARTESIAN_POINT('',(2.55,-0.43,0.3)); +#33972 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#33973 = DIRECTION('',(0.,0.,1.)); +#33974 = DEFINITIONAL_REPRESENTATION('',(#33975),#33979); +#33975 = LINE('',#33976,#33977); +#33976 = CARTESIAN_POINT('',(0.,-0.41)); +#33977 = VECTOR('',#33978,1.); +#33978 = DIRECTION('',(1.,0.)); +#33979 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33980 = ORIENTED_EDGE('',*,*,#33981,.T.); +#33981 = EDGE_CURVE('',#33954,#33982,#33984,.T.); +#33982 = VERTEX_POINT('',#33983); +#33983 = CARTESIAN_POINT('',(2.25,-0.84,1.025)); +#33984 = SURFACE_CURVE('',#33985,(#33990,#33997),.PCURVE_S1.); +#33985 = CIRCLE('',#33986,0.3); +#33986 = AXIS2_PLACEMENT_3D('',#33987,#33988,#33989); +#33987 = CARTESIAN_POINT('',(2.25,-0.84,0.725)); +#33988 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#33989 = DIRECTION('',(1.,2.22044604925E-16,3.700743415417E-16)); +#33990 = PCURVE('',#31637,#33991); +#33991 = DEFINITIONAL_REPRESENTATION('',(#33992),#33996); +#33992 = CIRCLE('',#33993,0.3); +#33993 = AXIS2_PLACEMENT_2D('',#33994,#33995); +#33994 = CARTESIAN_POINT('',(0.192340342435,0.16578967201)); +#33995 = DIRECTION('',(3.700743415417E-16,-1.)); +#33996 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#33997 = PCURVE('',#33998,#34003); +#33998 = CYLINDRICAL_SURFACE('',#33999,0.3); +#33999 = AXIS2_PLACEMENT_3D('',#34000,#34001,#34002); +#34000 = CARTESIAN_POINT('',(2.25,-0.43,0.725)); +#34001 = DIRECTION('',(-2.22044604925E-16,1.,-0.)); +#34002 = DIRECTION('',(1.,2.22044604925E-16,3.700743415417E-16)); +#34003 = DEFINITIONAL_REPRESENTATION('',(#34004),#34008); +#34004 = LINE('',#34005,#34006); +#34005 = CARTESIAN_POINT('',(6.28318530718,-0.41)); +#34006 = VECTOR('',#34007,1.); +#34007 = DIRECTION('',(-1.,0.)); +#34008 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34009 = ORIENTED_EDGE('',*,*,#34010,.T.); +#34010 = EDGE_CURVE('',#33982,#31622,#34011,.T.); +#34011 = SURFACE_CURVE('',#34012,(#34016,#34023),.PCURVE_S1.); +#34012 = LINE('',#34013,#34014); +#34013 = CARTESIAN_POINT('',(2.25,-0.84,1.025)); +#34014 = VECTOR('',#34015,1.); +#34015 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#34016 = PCURVE('',#31637,#34017); +#34017 = DEFINITIONAL_REPRESENTATION('',(#34018),#34022); +#34018 = LINE('',#34019,#34020); +#34019 = CARTESIAN_POINT('',(0.492340342435,0.16578967201)); +#34020 = VECTOR('',#34021,1.); +#34021 = DIRECTION('',(0.,1.)); +#34022 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34023 = PCURVE('',#32133,#34024); +#34024 = DEFINITIONAL_REPRESENTATION('',(#34025),#34029); +#34025 = LINE('',#34026,#34027); +#34026 = CARTESIAN_POINT('',(9.103828801925E-17,-0.41)); +#34027 = VECTOR('',#34028,1.); +#34028 = DIRECTION('',(1.,0.)); +#34029 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34030 = ADVANCED_FACE('',(#34031),#31687,.F.); +#34031 = FACE_BOUND('',#34032,.F.); +#34032 = EDGE_LOOP('',(#34033,#34053,#34054,#34097)); +#34033 = ORIENTED_EDGE('',*,*,#34034,.F.); +#34034 = EDGE_CURVE('',#31622,#32118,#34035,.T.); +#34035 = SURFACE_CURVE('',#34036,(#34040,#34046),.PCURVE_S1.); +#34036 = LINE('',#34037,#34038); +#34037 = CARTESIAN_POINT('',(2.25,-0.84,1.025)); +#34038 = VECTOR('',#34039,1.); +#34039 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#34040 = PCURVE('',#31687,#34041); +#34041 = DEFINITIONAL_REPRESENTATION('',(#34042),#34045); +#34042 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#34043,#34044),.UNSPECIFIED., + .F.,.F.,(2,2),(0.3,0.375),.PIECEWISE_BEZIER_KNOTS.); +#34043 = CARTESIAN_POINT('',(3.115,2.895956992222E-16)); +#34044 = CARTESIAN_POINT('',(3.129078212291,1.)); +#34045 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34046 = PCURVE('',#32133,#34047); +#34047 = DEFINITIONAL_REPRESENTATION('',(#34048),#34052); +#34048 = LINE('',#34049,#34050); +#34049 = CARTESIAN_POINT('',(9.103828801925E-17,-0.41)); +#34050 = VECTOR('',#34051,1.); +#34051 = DIRECTION('',(1.,0.)); +#34052 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34053 = ORIENTED_EDGE('',*,*,#31673,.T.); +#34054 = ORIENTED_EDGE('',*,*,#34055,.T.); +#34055 = EDGE_CURVE('',#31651,#32146,#34056,.T.); +#34056 = SURFACE_CURVE('',#34057,(#34061,#34090),.PCURVE_S1.); +#34057 = LINE('',#34058,#34059); +#34058 = CARTESIAN_POINT('',(2.25,-1.7,1.025)); +#34059 = VECTOR('',#34060,1.); +#34060 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#34061 = PCURVE('',#31687,#34062); +#34062 = DEFINITIONAL_REPRESENTATION('',(#34063),#34089); +#34063 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#34064,#34065,#34066,#34067, + #34068,#34069,#34070,#34071,#34072,#34073,#34074,#34075,#34076, + #34077,#34078,#34079,#34080,#34081,#34082,#34083,#34084,#34085, + #34086,#34087,#34088),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1 + ,1,1,1,1,1,1,1,1,1,1,4),(0.3,0.303409090909,0.306818181818, + 0.310227272727,0.313636363636,0.317045454545,0.320454545455, + 0.323863636364,0.327272727273,0.330681818182,0.334090909091,0.3375, + 0.340909090909,0.344318181818,0.347727272727,0.351136363636, + 0.354545454545,0.357954545455,0.361363636364,0.364772727273, + 0.368181818182,0.371590909091,0.375),.QUASI_UNIFORM_KNOTS.); +#34064 = CARTESIAN_POINT('',(3.975,0.)); +#34065 = CARTESIAN_POINT('',(3.975424575426,1.515151515152E-02)); +#34066 = CARTESIAN_POINT('',(3.9762743625,4.545454545455E-02)); +#34067 = CARTESIAN_POINT('',(3.97755095609,9.090909090909E-02)); +#34068 = CARTESIAN_POINT('',(3.978829466966,0.136363636364)); +#34069 = CARTESIAN_POINT('',(3.98010989945,0.181818181818)); +#34070 = CARTESIAN_POINT('',(3.981392257878,0.227272727273)); +#34071 = CARTESIAN_POINT('',(3.982676546599,0.272727272727)); +#34072 = CARTESIAN_POINT('',(3.983962769974,0.318181818182)); +#34073 = CARTESIAN_POINT('',(3.985250932379,0.363636363636)); +#34074 = CARTESIAN_POINT('',(3.9865410382,0.409090909091)); +#34075 = CARTESIAN_POINT('',(3.98783309184,0.454545454545)); +#34076 = CARTESIAN_POINT('',(3.989127097713,0.5)); +#34077 = CARTESIAN_POINT('',(3.990423060246,0.545454545455)); +#34078 = CARTESIAN_POINT('',(3.991720983883,0.590909090909)); +#34079 = CARTESIAN_POINT('',(3.993020873076,0.636363636364)); +#34080 = CARTESIAN_POINT('',(3.994322732295,0.681818181818)); +#34081 = CARTESIAN_POINT('',(3.995626566021,0.727272727273)); +#34082 = CARTESIAN_POINT('',(3.996932378749,0.772727272727)); +#34083 = CARTESIAN_POINT('',(3.99824017499,0.818181818182)); +#34084 = CARTESIAN_POINT('',(3.999549959265,0.863636363636)); +#34085 = CARTESIAN_POINT('',(4.000861736112,0.909090909091)); +#34086 = CARTESIAN_POINT('',(4.00217551008,0.954545454545)); +#34087 = CARTESIAN_POINT('',(4.003052693851,0.984848484848)); +#34088 = CARTESIAN_POINT('',(4.003491620112,1.)); +#34089 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34090 = PCURVE('',#32183,#34091); +#34091 = DEFINITIONAL_REPRESENTATION('',(#34092),#34096); +#34092 = LINE('',#34093,#34094); +#34093 = CARTESIAN_POINT('',(-0.,0.)); +#34094 = VECTOR('',#34095,1.); +#34095 = DIRECTION('',(1.,0.)); +#34096 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34097 = ORIENTED_EDGE('',*,*,#32145,.F.); +#34098 = ADVANCED_FACE('',(#34099),#31768,.F.); +#34099 = FACE_BOUND('',#34100,.F.); +#34100 = EDGE_LOOP('',(#34101,#34102,#34130,#34151)); +#34101 = ORIENTED_EDGE('',*,*,#31754,.T.); +#34102 = ORIENTED_EDGE('',*,*,#34103,.T.); +#34103 = EDGE_CURVE('',#31727,#34104,#34106,.T.); +#34104 = VERTEX_POINT('',#34105); +#34105 = CARTESIAN_POINT('',(2.35,0.43,0.725)); +#34106 = SURFACE_CURVE('',#34107,(#34112,#34119),.PCURVE_S1.); +#34107 = CIRCLE('',#34108,0.1); +#34108 = AXIS2_PLACEMENT_3D('',#34109,#34110,#34111); +#34109 = CARTESIAN_POINT('',(2.25,0.43,0.725)); +#34110 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#34111 = DIRECTION('',(4.440892098501E-15,9.860761315262E-31,1.)); +#34112 = PCURVE('',#31768,#34113); +#34113 = DEFINITIONAL_REPRESENTATION('',(#34114),#34118); +#34114 = LINE('',#34115,#34116); +#34115 = CARTESIAN_POINT('',(0.,-0.41)); +#34116 = VECTOR('',#34117,1.); +#34117 = DIRECTION('',(1.,0.)); +#34118 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34119 = PCURVE('',#31742,#34120); +#34120 = DEFINITIONAL_REPRESENTATION('',(#34121),#34129); +#34121 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#34122,#34123,#34124,#34125 + ,#34126,#34127,#34128),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#34122 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#34123 = CARTESIAN_POINT('',(0.292340342435,-7.415408746888E-03)); +#34124 = CARTESIAN_POINT('',(0.142340342435,7.918713163156E-02)); +#34125 = CARTESIAN_POINT('',(-7.659657565E-03,0.16578967201)); +#34126 = CARTESIAN_POINT('',(0.142340342435,0.252392212388)); +#34127 = CARTESIAN_POINT('',(0.292340342435,0.338994752767)); +#34128 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#34129 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34130 = ORIENTED_EDGE('',*,*,#34131,.F.); +#34131 = EDGE_CURVE('',#32328,#34104,#34132,.T.); +#34132 = SURFACE_CURVE('',#34133,(#34137,#34144),.PCURVE_S1.); +#34133 = LINE('',#34134,#34135); +#34134 = CARTESIAN_POINT('',(2.35,0.84,0.725)); +#34135 = VECTOR('',#34136,1.); +#34136 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#34137 = PCURVE('',#31768,#34138); +#34138 = DEFINITIONAL_REPRESENTATION('',(#34139),#34143); +#34139 = LINE('',#34140,#34141); +#34140 = CARTESIAN_POINT('',(1.570796326795,-1.110223024625E-16)); +#34141 = VECTOR('',#34142,1.); +#34142 = DIRECTION('',(0.,-1.)); +#34143 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34144 = PCURVE('',#32371,#34145); +#34145 = DEFINITIONAL_REPRESENTATION('',(#34146),#34150); +#34146 = LINE('',#34147,#34148); +#34147 = CARTESIAN_POINT('',(0.,0.)); +#34148 = VECTOR('',#34149,1.); +#34149 = DIRECTION('',(7.584527938158E-44,-1.)); +#34150 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34151 = ORIENTED_EDGE('',*,*,#32327,.F.); +#34152 = ADVANCED_FACE('',(#34153),#31742,.T.); +#34153 = FACE_BOUND('',#34154,.T.); +#34154 = EDGE_LOOP('',(#34155,#34156,#34157,#34158,#34181,#34205,#34228, + #34251,#34274,#34302,#34325,#34349)); +#34155 = ORIENTED_EDGE('',*,*,#31864,.F.); +#34156 = ORIENTED_EDGE('',*,*,#31726,.T.); +#34157 = ORIENTED_EDGE('',*,*,#34103,.T.); +#34158 = ORIENTED_EDGE('',*,*,#34159,.T.); +#34159 = EDGE_CURVE('',#34104,#34160,#34162,.T.); +#34160 = VERTEX_POINT('',#34161); +#34161 = CARTESIAN_POINT('',(2.35,0.43,0.3)); +#34162 = SURFACE_CURVE('',#34163,(#34167,#34174),.PCURVE_S1.); +#34163 = LINE('',#34164,#34165); +#34164 = CARTESIAN_POINT('',(2.35,0.43,0.725)); +#34165 = VECTOR('',#34166,1.); +#34166 = DIRECTION('',(1.044915787883E-15,2.320179133003E-31,-1.)); +#34167 = PCURVE('',#31742,#34168); +#34168 = DEFINITIONAL_REPRESENTATION('',(#34169),#34173); +#34169 = LINE('',#34170,#34171); +#34170 = CARTESIAN_POINT('',(0.192340342435,6.578967201E-02)); +#34171 = VECTOR('',#34172,1.); +#34172 = DIRECTION('',(-1.,-1.044915787883E-15)); +#34173 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34174 = PCURVE('',#32371,#34175); +#34175 = DEFINITIONAL_REPRESENTATION('',(#34176),#34180); +#34176 = LINE('',#34177,#34178); +#34177 = CARTESIAN_POINT('',(-9.512734445312E-32,-0.41)); +#34178 = VECTOR('',#34179,1.); +#34179 = DIRECTION('',(1.,0.)); +#34180 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34181 = ORIENTED_EDGE('',*,*,#34182,.T.); +#34182 = EDGE_CURVE('',#34160,#34183,#34185,.T.); +#34183 = VERTEX_POINT('',#34184); +#34184 = CARTESIAN_POINT('',(2.65,0.43,5.551115123126E-17)); +#34185 = SURFACE_CURVE('',#34186,(#34191,#34198),.PCURVE_S1.); +#34186 = CIRCLE('',#34187,0.3); +#34187 = AXIS2_PLACEMENT_3D('',#34188,#34189,#34190); +#34188 = CARTESIAN_POINT('',(2.65,0.43,0.3)); +#34189 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#34190 = DIRECTION('',(-1.,-2.22044604925E-16,3.515706244646E-15)); +#34191 = PCURVE('',#31742,#34192); +#34192 = DEFINITIONAL_REPRESENTATION('',(#34193),#34197); +#34193 = CIRCLE('',#34194,0.3); +#34194 = AXIS2_PLACEMENT_2D('',#34195,#34196); +#34195 = CARTESIAN_POINT('',(-0.232659657565,-0.23421032799)); +#34196 = DIRECTION('',(3.515706244646E-15,1.)); +#34197 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34198 = PCURVE('',#32400,#34199); +#34199 = DEFINITIONAL_REPRESENTATION('',(#34200),#34204); +#34200 = LINE('',#34201,#34202); +#34201 = CARTESIAN_POINT('',(6.28318530718,-0.41)); +#34202 = VECTOR('',#34203,1.); +#34203 = DIRECTION('',(-1.,-3.533949646071E-17)); +#34204 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34205 = ORIENTED_EDGE('',*,*,#34206,.T.); +#34206 = EDGE_CURVE('',#34183,#34207,#34209,.T.); +#34207 = VERTEX_POINT('',#34208); +#34208 = CARTESIAN_POINT('',(3.,0.43,5.551115123126E-17)); +#34209 = SURFACE_CURVE('',#34210,(#34214,#34221),.PCURVE_S1.); +#34210 = LINE('',#34211,#34212); +#34211 = CARTESIAN_POINT('',(2.65,0.43,5.551115123126E-17)); +#34212 = VECTOR('',#34213,1.); +#34213 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#34214 = PCURVE('',#31742,#34215); +#34215 = DEFINITIONAL_REPRESENTATION('',(#34216),#34220); +#34216 = LINE('',#34217,#34218); +#34217 = CARTESIAN_POINT('',(-0.532659657565,-0.23421032799)); +#34218 = VECTOR('',#34219,1.); +#34219 = DIRECTION('',(0.,-1.)); +#34220 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34221 = PCURVE('',#32428,#34222); +#34222 = DEFINITIONAL_REPRESENTATION('',(#34223),#34227); +#34223 = LINE('',#34224,#34225); +#34224 = CARTESIAN_POINT('',(-9.103828801925E-17,-0.41)); +#34225 = VECTOR('',#34226,1.); +#34226 = DIRECTION('',(1.,0.)); +#34227 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34228 = ORIENTED_EDGE('',*,*,#34229,.T.); +#34229 = EDGE_CURVE('',#34207,#34230,#34232,.T.); +#34230 = VERTEX_POINT('',#34231); +#34231 = CARTESIAN_POINT('',(3.,0.43,0.2)); +#34232 = SURFACE_CURVE('',#34233,(#34237,#34244),.PCURVE_S1.); +#34233 = LINE('',#34234,#34235); +#34234 = CARTESIAN_POINT('',(3.,0.43,5.551115123126E-17)); +#34235 = VECTOR('',#34236,1.); +#34236 = DIRECTION('',(0.,0.,1.)); +#34237 = PCURVE('',#31742,#34238); +#34238 = DEFINITIONAL_REPRESENTATION('',(#34239),#34243); +#34239 = LINE('',#34240,#34241); +#34240 = CARTESIAN_POINT('',(-0.532659657565,-0.58421032799)); +#34241 = VECTOR('',#34242,1.); +#34242 = DIRECTION('',(1.,0.)); +#34243 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34244 = PCURVE('',#32456,#34245); +#34245 = DEFINITIONAL_REPRESENTATION('',(#34246),#34250); +#34246 = LINE('',#34247,#34248); +#34247 = CARTESIAN_POINT('',(0.,-0.41)); +#34248 = VECTOR('',#34249,1.); +#34249 = DIRECTION('',(1.,0.)); +#34250 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34251 = ORIENTED_EDGE('',*,*,#34252,.T.); +#34252 = EDGE_CURVE('',#34230,#34253,#34255,.T.); +#34253 = VERTEX_POINT('',#34254); +#34254 = CARTESIAN_POINT('',(2.65,0.43,0.2)); +#34255 = SURFACE_CURVE('',#34256,(#34260,#34267),.PCURVE_S1.); +#34256 = LINE('',#34257,#34258); +#34257 = CARTESIAN_POINT('',(3.,0.43,0.2)); +#34258 = VECTOR('',#34259,1.); +#34259 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#34260 = PCURVE('',#31742,#34261); +#34261 = DEFINITIONAL_REPRESENTATION('',(#34262),#34266); +#34262 = LINE('',#34263,#34264); +#34263 = CARTESIAN_POINT('',(-0.332659657565,-0.58421032799)); +#34264 = VECTOR('',#34265,1.); +#34265 = DIRECTION('',(0.,1.)); +#34266 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34267 = PCURVE('',#32484,#34268); +#34268 = DEFINITIONAL_REPRESENTATION('',(#34269),#34273); +#34269 = LINE('',#34270,#34271); +#34270 = CARTESIAN_POINT('',(9.103828801925E-17,-0.41)); +#34271 = VECTOR('',#34272,1.); +#34272 = DIRECTION('',(1.,0.)); +#34273 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34274 = ORIENTED_EDGE('',*,*,#34275,.T.); +#34275 = EDGE_CURVE('',#34253,#34276,#34278,.T.); +#34276 = VERTEX_POINT('',#34277); +#34277 = CARTESIAN_POINT('',(2.55,0.43,0.3)); +#34278 = SURFACE_CURVE('',#34279,(#34284,#34295),.PCURVE_S1.); +#34279 = CIRCLE('',#34280,0.1); +#34280 = AXIS2_PLACEMENT_3D('',#34281,#34282,#34283); +#34281 = CARTESIAN_POINT('',(2.65,0.43,0.3)); +#34282 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#34283 = DIRECTION('',(0.,0.,-1.)); +#34284 = PCURVE('',#31742,#34285); +#34285 = DEFINITIONAL_REPRESENTATION('',(#34286),#34294); +#34286 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#34287,#34288,#34289,#34290 + ,#34291,#34292,#34293),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#34287 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#34288 = CARTESIAN_POINT('',(-0.332659657565,-6.100524723311E-02)); +#34289 = CARTESIAN_POINT('',(-0.182659657565,-0.147607787612)); +#34290 = CARTESIAN_POINT('',(-3.2659657565E-02,-0.23421032799)); +#34291 = CARTESIAN_POINT('',(-0.182659657565,-0.320812868368)); +#34292 = CARTESIAN_POINT('',(-0.332659657565,-0.407415408747)); +#34293 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#34294 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34295 = PCURVE('',#32517,#34296); +#34296 = DEFINITIONAL_REPRESENTATION('',(#34297),#34301); +#34297 = LINE('',#34298,#34299); +#34298 = CARTESIAN_POINT('',(0.,-0.41)); +#34299 = VECTOR('',#34300,1.); +#34300 = DIRECTION('',(1.,3.533949646071E-17)); +#34301 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34302 = ORIENTED_EDGE('',*,*,#34303,.T.); +#34303 = EDGE_CURVE('',#34276,#34304,#34306,.T.); +#34304 = VERTEX_POINT('',#34305); +#34305 = CARTESIAN_POINT('',(2.55,0.43,0.725)); +#34306 = SURFACE_CURVE('',#34307,(#34311,#34318),.PCURVE_S1.); +#34307 = LINE('',#34308,#34309); +#34308 = CARTESIAN_POINT('',(2.55,0.43,0.3)); +#34309 = VECTOR('',#34310,1.); +#34310 = DIRECTION('',(0.,0.,1.)); +#34311 = PCURVE('',#31742,#34312); +#34312 = DEFINITIONAL_REPRESENTATION('',(#34313),#34317); +#34313 = LINE('',#34314,#34315); +#34314 = CARTESIAN_POINT('',(-0.232659657565,-0.13421032799)); +#34315 = VECTOR('',#34316,1.); +#34316 = DIRECTION('',(1.,0.)); +#34317 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34318 = PCURVE('',#32545,#34319); +#34319 = DEFINITIONAL_REPRESENTATION('',(#34320),#34324); +#34320 = LINE('',#34321,#34322); +#34321 = CARTESIAN_POINT('',(0.,-0.41)); +#34322 = VECTOR('',#34323,1.); +#34323 = DIRECTION('',(1.,0.)); +#34324 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34325 = ORIENTED_EDGE('',*,*,#34326,.T.); +#34326 = EDGE_CURVE('',#34304,#34327,#34329,.T.); +#34327 = VERTEX_POINT('',#34328); +#34328 = CARTESIAN_POINT('',(2.25,0.43,1.025)); +#34329 = SURFACE_CURVE('',#34330,(#34335,#34342),.PCURVE_S1.); +#34330 = CIRCLE('',#34331,0.3); +#34331 = AXIS2_PLACEMENT_3D('',#34332,#34333,#34334); +#34332 = CARTESIAN_POINT('',(2.25,0.43,0.725)); +#34333 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#34334 = DIRECTION('',(1.,2.22044604925E-16,3.700743415417E-16)); +#34335 = PCURVE('',#31742,#34336); +#34336 = DEFINITIONAL_REPRESENTATION('',(#34337),#34341); +#34337 = CIRCLE('',#34338,0.3); +#34338 = AXIS2_PLACEMENT_2D('',#34339,#34340); +#34339 = CARTESIAN_POINT('',(0.192340342435,0.16578967201)); +#34340 = DIRECTION('',(3.700743415417E-16,-1.)); +#34341 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34342 = PCURVE('',#32574,#34343); +#34343 = DEFINITIONAL_REPRESENTATION('',(#34344),#34348); +#34344 = LINE('',#34345,#34346); +#34345 = CARTESIAN_POINT('',(6.28318530718,-0.41)); +#34346 = VECTOR('',#34347,1.); +#34347 = DIRECTION('',(-1.,0.)); +#34348 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34349 = ORIENTED_EDGE('',*,*,#34350,.T.); +#34350 = EDGE_CURVE('',#34327,#31865,#34351,.T.); +#34351 = SURFACE_CURVE('',#34352,(#34356,#34363),.PCURVE_S1.); +#34352 = LINE('',#34353,#34354); +#34353 = CARTESIAN_POINT('',(2.25,0.43,1.025)); +#34354 = VECTOR('',#34355,1.); +#34355 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#34356 = PCURVE('',#31742,#34357); +#34357 = DEFINITIONAL_REPRESENTATION('',(#34358),#34362); +#34358 = LINE('',#34359,#34360); +#34359 = CARTESIAN_POINT('',(0.492340342435,0.16578967201)); +#34360 = VECTOR('',#34361,1.); +#34361 = DIRECTION('',(0.,1.)); +#34362 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34363 = PCURVE('',#32083,#34364); +#34364 = DEFINITIONAL_REPRESENTATION('',(#34365),#34369); +#34365 = LINE('',#34366,#34367); +#34366 = CARTESIAN_POINT('',(9.103828801925E-17,-0.41)); +#34367 = VECTOR('',#34368,1.); +#34368 = DIRECTION('',(1.,0.)); +#34369 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34370 = ADVANCED_FACE('',(#34371),#31799,.F.); +#34371 = FACE_BOUND('',#34372,.F.); +#34372 = EDGE_LOOP('',(#34373,#34374,#34375,#34403,#34426,#34450,#34473, + #34496,#34519,#34547,#34570,#34594)); +#34373 = ORIENTED_EDGE('',*,*,#31888,.F.); +#34374 = ORIENTED_EDGE('',*,*,#31783,.T.); +#34375 = ORIENTED_EDGE('',*,*,#34376,.T.); +#34376 = EDGE_CURVE('',#31784,#34377,#34379,.T.); +#34377 = VERTEX_POINT('',#34378); +#34378 = CARTESIAN_POINT('',(2.35,-0.43,0.725)); +#34379 = SURFACE_CURVE('',#34380,(#34385,#34396),.PCURVE_S1.); +#34380 = CIRCLE('',#34381,0.1); +#34381 = AXIS2_PLACEMENT_3D('',#34382,#34383,#34384); +#34382 = CARTESIAN_POINT('',(2.25,-0.43,0.725)); +#34383 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#34384 = DIRECTION('',(4.440892098501E-15,9.860761315262E-31,1.)); +#34385 = PCURVE('',#31799,#34386); +#34386 = DEFINITIONAL_REPRESENTATION('',(#34387),#34395); +#34387 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#34388,#34389,#34390,#34391 + ,#34392,#34393,#34394),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#34388 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#34389 = CARTESIAN_POINT('',(0.292340342435,-7.415408746888E-03)); +#34390 = CARTESIAN_POINT('',(0.142340342435,7.918713163156E-02)); +#34391 = CARTESIAN_POINT('',(-7.659657565E-03,0.16578967201)); +#34392 = CARTESIAN_POINT('',(0.142340342435,0.252392212388)); +#34393 = CARTESIAN_POINT('',(0.292340342435,0.338994752767)); +#34394 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#34395 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34396 = PCURVE('',#31849,#34397); +#34397 = DEFINITIONAL_REPRESENTATION('',(#34398),#34402); +#34398 = LINE('',#34399,#34400); +#34399 = CARTESIAN_POINT('',(0.,0.)); +#34400 = VECTOR('',#34401,1.); +#34401 = DIRECTION('',(1.,0.)); +#34402 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34403 = ORIENTED_EDGE('',*,*,#34404,.T.); +#34404 = EDGE_CURVE('',#34377,#34405,#34407,.T.); +#34405 = VERTEX_POINT('',#34406); +#34406 = CARTESIAN_POINT('',(2.35,-0.43,0.3)); +#34407 = SURFACE_CURVE('',#34408,(#34412,#34419),.PCURVE_S1.); +#34408 = LINE('',#34409,#34410); +#34409 = CARTESIAN_POINT('',(2.35,-0.43,0.725)); +#34410 = VECTOR('',#34411,1.); +#34411 = DIRECTION('',(1.044915787883E-15,2.320179133003E-31,-1.)); +#34412 = PCURVE('',#31799,#34413); +#34413 = DEFINITIONAL_REPRESENTATION('',(#34414),#34418); +#34414 = LINE('',#34415,#34416); +#34415 = CARTESIAN_POINT('',(0.192340342435,6.578967201E-02)); +#34416 = VECTOR('',#34417,1.); +#34417 = DIRECTION('',(-1.,-1.044915787883E-15)); +#34418 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34419 = PCURVE('',#33795,#34420); +#34420 = DEFINITIONAL_REPRESENTATION('',(#34421),#34425); +#34421 = LINE('',#34422,#34423); +#34422 = CARTESIAN_POINT('',(0.,0.)); +#34423 = VECTOR('',#34424,1.); +#34424 = DIRECTION('',(1.,0.)); +#34425 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34426 = ORIENTED_EDGE('',*,*,#34427,.T.); +#34427 = EDGE_CURVE('',#34405,#34428,#34430,.T.); +#34428 = VERTEX_POINT('',#34429); +#34429 = CARTESIAN_POINT('',(2.65,-0.43,5.551115123126E-17)); +#34430 = SURFACE_CURVE('',#34431,(#34436,#34443),.PCURVE_S1.); +#34431 = CIRCLE('',#34432,0.3); +#34432 = AXIS2_PLACEMENT_3D('',#34433,#34434,#34435); +#34433 = CARTESIAN_POINT('',(2.65,-0.43,0.3)); +#34434 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#34435 = DIRECTION('',(-1.,-2.22044604925E-16,3.515706244646E-15)); +#34436 = PCURVE('',#31799,#34437); +#34437 = DEFINITIONAL_REPRESENTATION('',(#34438),#34442); +#34438 = CIRCLE('',#34439,0.3); +#34439 = AXIS2_PLACEMENT_2D('',#34440,#34441); +#34440 = CARTESIAN_POINT('',(-0.232659657565,-0.23421032799)); +#34441 = DIRECTION('',(3.515706244646E-15,1.)); +#34442 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34443 = PCURVE('',#33824,#34444); +#34444 = DEFINITIONAL_REPRESENTATION('',(#34445),#34449); +#34445 = LINE('',#34446,#34447); +#34446 = CARTESIAN_POINT('',(6.28318530718,5.551115123126E-17)); +#34447 = VECTOR('',#34448,1.); +#34448 = DIRECTION('',(-1.,-3.533949646071E-17)); +#34449 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34450 = ORIENTED_EDGE('',*,*,#34451,.T.); +#34451 = EDGE_CURVE('',#34428,#34452,#34454,.T.); +#34452 = VERTEX_POINT('',#34453); +#34453 = CARTESIAN_POINT('',(3.,-0.43,5.551115123126E-17)); +#34454 = SURFACE_CURVE('',#34455,(#34459,#34466),.PCURVE_S1.); +#34455 = LINE('',#34456,#34457); +#34456 = CARTESIAN_POINT('',(2.65,-0.43,5.551115123126E-17)); +#34457 = VECTOR('',#34458,1.); +#34458 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#34459 = PCURVE('',#31799,#34460); +#34460 = DEFINITIONAL_REPRESENTATION('',(#34461),#34465); +#34461 = LINE('',#34462,#34463); +#34462 = CARTESIAN_POINT('',(-0.532659657565,-0.23421032799)); +#34463 = VECTOR('',#34464,1.); +#34464 = DIRECTION('',(0.,-1.)); +#34465 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34466 = PCURVE('',#33852,#34467); +#34467 = DEFINITIONAL_REPRESENTATION('',(#34468),#34472); +#34468 = LINE('',#34469,#34470); +#34469 = CARTESIAN_POINT('',(0.,0.)); +#34470 = VECTOR('',#34471,1.); +#34471 = DIRECTION('',(1.,0.)); +#34472 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34473 = ORIENTED_EDGE('',*,*,#34474,.T.); +#34474 = EDGE_CURVE('',#34452,#34475,#34477,.T.); +#34475 = VERTEX_POINT('',#34476); +#34476 = CARTESIAN_POINT('',(3.,-0.43,0.2)); +#34477 = SURFACE_CURVE('',#34478,(#34482,#34489),.PCURVE_S1.); +#34478 = LINE('',#34479,#34480); +#34479 = CARTESIAN_POINT('',(3.,-0.43,5.551115123126E-17)); +#34480 = VECTOR('',#34481,1.); +#34481 = DIRECTION('',(0.,0.,1.)); +#34482 = PCURVE('',#31799,#34483); +#34483 = DEFINITIONAL_REPRESENTATION('',(#34484),#34488); +#34484 = LINE('',#34485,#34486); +#34485 = CARTESIAN_POINT('',(-0.532659657565,-0.58421032799)); +#34486 = VECTOR('',#34487,1.); +#34487 = DIRECTION('',(1.,0.)); +#34488 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34489 = PCURVE('',#33880,#34490); +#34490 = DEFINITIONAL_REPRESENTATION('',(#34491),#34495); +#34491 = LINE('',#34492,#34493); +#34492 = CARTESIAN_POINT('',(0.,0.)); +#34493 = VECTOR('',#34494,1.); +#34494 = DIRECTION('',(1.,0.)); +#34495 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34496 = ORIENTED_EDGE('',*,*,#34497,.T.); +#34497 = EDGE_CURVE('',#34475,#34498,#34500,.T.); +#34498 = VERTEX_POINT('',#34499); +#34499 = CARTESIAN_POINT('',(2.65,-0.43,0.2)); +#34500 = SURFACE_CURVE('',#34501,(#34505,#34512),.PCURVE_S1.); +#34501 = LINE('',#34502,#34503); +#34502 = CARTESIAN_POINT('',(3.,-0.43,0.2)); +#34503 = VECTOR('',#34504,1.); +#34504 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#34505 = PCURVE('',#31799,#34506); +#34506 = DEFINITIONAL_REPRESENTATION('',(#34507),#34511); +#34507 = LINE('',#34508,#34509); +#34508 = CARTESIAN_POINT('',(-0.332659657565,-0.58421032799)); +#34509 = VECTOR('',#34510,1.); +#34510 = DIRECTION('',(0.,1.)); +#34511 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34512 = PCURVE('',#33908,#34513); +#34513 = DEFINITIONAL_REPRESENTATION('',(#34514),#34518); +#34514 = LINE('',#34515,#34516); +#34515 = CARTESIAN_POINT('',(-0.,0.)); +#34516 = VECTOR('',#34517,1.); +#34517 = DIRECTION('',(1.,0.)); +#34518 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34519 = ORIENTED_EDGE('',*,*,#34520,.T.); +#34520 = EDGE_CURVE('',#34498,#34521,#34523,.T.); +#34521 = VERTEX_POINT('',#34522); +#34522 = CARTESIAN_POINT('',(2.55,-0.43,0.3)); +#34523 = SURFACE_CURVE('',#34524,(#34529,#34540),.PCURVE_S1.); +#34524 = CIRCLE('',#34525,0.1); +#34525 = AXIS2_PLACEMENT_3D('',#34526,#34527,#34528); +#34526 = CARTESIAN_POINT('',(2.65,-0.43,0.3)); +#34527 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#34528 = DIRECTION('',(0.,0.,-1.)); +#34529 = PCURVE('',#31799,#34530); +#34530 = DEFINITIONAL_REPRESENTATION('',(#34531),#34539); +#34531 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#34532,#34533,#34534,#34535 + ,#34536,#34537,#34538),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#34532 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#34533 = CARTESIAN_POINT('',(-0.332659657565,-6.100524723311E-02)); +#34534 = CARTESIAN_POINT('',(-0.182659657565,-0.147607787612)); +#34535 = CARTESIAN_POINT('',(-3.2659657565E-02,-0.23421032799)); +#34536 = CARTESIAN_POINT('',(-0.182659657565,-0.320812868368)); +#34537 = CARTESIAN_POINT('',(-0.332659657565,-0.407415408747)); +#34538 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#34539 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34540 = PCURVE('',#33941,#34541); +#34541 = DEFINITIONAL_REPRESENTATION('',(#34542),#34546); +#34542 = LINE('',#34543,#34544); +#34543 = CARTESIAN_POINT('',(0.,0.)); +#34544 = VECTOR('',#34545,1.); +#34545 = DIRECTION('',(1.,3.533949646071E-17)); +#34546 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34547 = ORIENTED_EDGE('',*,*,#34548,.T.); +#34548 = EDGE_CURVE('',#34521,#34549,#34551,.T.); +#34549 = VERTEX_POINT('',#34550); +#34550 = CARTESIAN_POINT('',(2.55,-0.43,0.725)); +#34551 = SURFACE_CURVE('',#34552,(#34556,#34563),.PCURVE_S1.); +#34552 = LINE('',#34553,#34554); +#34553 = CARTESIAN_POINT('',(2.55,-0.43,0.3)); +#34554 = VECTOR('',#34555,1.); +#34555 = DIRECTION('',(0.,0.,1.)); +#34556 = PCURVE('',#31799,#34557); +#34557 = DEFINITIONAL_REPRESENTATION('',(#34558),#34562); +#34558 = LINE('',#34559,#34560); +#34559 = CARTESIAN_POINT('',(-0.232659657565,-0.13421032799)); +#34560 = VECTOR('',#34561,1.); +#34561 = DIRECTION('',(1.,0.)); +#34562 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34563 = PCURVE('',#33969,#34564); +#34564 = DEFINITIONAL_REPRESENTATION('',(#34565),#34569); +#34565 = LINE('',#34566,#34567); +#34566 = CARTESIAN_POINT('',(0.,0.)); +#34567 = VECTOR('',#34568,1.); +#34568 = DIRECTION('',(1.,0.)); +#34569 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34570 = ORIENTED_EDGE('',*,*,#34571,.T.); +#34571 = EDGE_CURVE('',#34549,#34572,#34574,.T.); +#34572 = VERTEX_POINT('',#34573); +#34573 = CARTESIAN_POINT('',(2.25,-0.43,1.025)); +#34574 = SURFACE_CURVE('',#34575,(#34580,#34587),.PCURVE_S1.); +#34575 = CIRCLE('',#34576,0.3); +#34576 = AXIS2_PLACEMENT_3D('',#34577,#34578,#34579); +#34577 = CARTESIAN_POINT('',(2.25,-0.43,0.725)); +#34578 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#34579 = DIRECTION('',(1.,2.22044604925E-16,3.700743415417E-16)); +#34580 = PCURVE('',#31799,#34581); +#34581 = DEFINITIONAL_REPRESENTATION('',(#34582),#34586); +#34582 = CIRCLE('',#34583,0.3); +#34583 = AXIS2_PLACEMENT_2D('',#34584,#34585); +#34584 = CARTESIAN_POINT('',(0.192340342435,0.16578967201)); +#34585 = DIRECTION('',(3.700743415417E-16,-1.)); +#34586 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34587 = PCURVE('',#33998,#34588); +#34588 = DEFINITIONAL_REPRESENTATION('',(#34589),#34593); +#34589 = LINE('',#34590,#34591); +#34590 = CARTESIAN_POINT('',(6.28318530718,0.)); +#34591 = VECTOR('',#34592,1.); +#34592 = DIRECTION('',(-1.,0.)); +#34593 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34594 = ORIENTED_EDGE('',*,*,#34595,.T.); +#34595 = EDGE_CURVE('',#34572,#31889,#34596,.T.); +#34596 = SURFACE_CURVE('',#34597,(#34601,#34608),.PCURVE_S1.); +#34597 = LINE('',#34598,#34599); +#34598 = CARTESIAN_POINT('',(2.25,-0.43,1.025)); +#34599 = VECTOR('',#34600,1.); +#34600 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#34601 = PCURVE('',#31799,#34602); +#34602 = DEFINITIONAL_REPRESENTATION('',(#34603),#34607); +#34603 = LINE('',#34604,#34605); +#34604 = CARTESIAN_POINT('',(0.492340342435,0.16578967201)); +#34605 = VECTOR('',#34606,1.); +#34606 = DIRECTION('',(0.,1.)); +#34607 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34608 = PCURVE('',#32133,#34609); +#34609 = DEFINITIONAL_REPRESENTATION('',(#34610),#34614); +#34610 = LINE('',#34611,#34612); +#34611 = CARTESIAN_POINT('',(-0.,0.)); +#34612 = VECTOR('',#34613,1.); +#34613 = DIRECTION('',(1.,0.)); +#34614 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34615 = ADVANCED_FACE('',(#34616),#31849,.F.); +#34616 = FACE_BOUND('',#34617,.F.); +#34617 = EDGE_LOOP('',(#34618,#34619,#34620,#34641)); +#34618 = ORIENTED_EDGE('',*,*,#31835,.T.); +#34619 = ORIENTED_EDGE('',*,*,#33751,.T.); +#34620 = ORIENTED_EDGE('',*,*,#34621,.F.); +#34621 = EDGE_CURVE('',#34377,#33752,#34622,.T.); +#34622 = SURFACE_CURVE('',#34623,(#34627,#34634),.PCURVE_S1.); +#34623 = LINE('',#34624,#34625); +#34624 = CARTESIAN_POINT('',(2.35,-0.43,0.725)); +#34625 = VECTOR('',#34626,1.); +#34626 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#34627 = PCURVE('',#31849,#34628); +#34628 = DEFINITIONAL_REPRESENTATION('',(#34629),#34633); +#34629 = LINE('',#34630,#34631); +#34630 = CARTESIAN_POINT('',(1.570796326795,0.)); +#34631 = VECTOR('',#34632,1.); +#34632 = DIRECTION('',(0.,-1.)); +#34633 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34634 = PCURVE('',#33795,#34635); +#34635 = DEFINITIONAL_REPRESENTATION('',(#34636),#34640); +#34636 = LINE('',#34637,#34638); +#34637 = CARTESIAN_POINT('',(0.,0.)); +#34638 = VECTOR('',#34639,1.); +#34639 = DIRECTION('',(7.584527938158E-44,-1.)); +#34640 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34641 = ORIENTED_EDGE('',*,*,#34376,.F.); +#34642 = ADVANCED_FACE('',(#34643),#31925,.F.); +#34643 = FACE_BOUND('',#34644,.F.); +#34644 = EDGE_LOOP('',(#34645,#34665,#34666,#34686)); +#34645 = ORIENTED_EDGE('',*,*,#34646,.F.); +#34646 = EDGE_CURVE('',#31865,#32068,#34647,.T.); +#34647 = SURFACE_CURVE('',#34648,(#34652,#34658),.PCURVE_S1.); +#34648 = LINE('',#34649,#34650); +#34649 = CARTESIAN_POINT('',(2.25,0.43,1.025)); +#34650 = VECTOR('',#34651,1.); +#34651 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#34652 = PCURVE('',#31925,#34653); +#34653 = DEFINITIONAL_REPRESENTATION('',(#34654),#34657); +#34654 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#34655,#34656),.UNSPECIFIED., + .F.,.F.,(2,2),(0.3,0.375),.PIECEWISE_BEZIER_KNOTS.); +#34655 = CARTESIAN_POINT('',(1.845,3.104370344802E-17)); +#34656 = CARTESIAN_POINT('',(1.837793296089,1.)); +#34657 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34658 = PCURVE('',#32083,#34659); +#34659 = DEFINITIONAL_REPRESENTATION('',(#34660),#34664); +#34660 = LINE('',#34661,#34662); +#34661 = CARTESIAN_POINT('',(9.103828801925E-17,-0.41)); +#34662 = VECTOR('',#34663,1.); +#34663 = DIRECTION('',(1.,0.)); +#34664 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34665 = ORIENTED_EDGE('',*,*,#31911,.T.); +#34666 = ORIENTED_EDGE('',*,*,#34667,.T.); +#34667 = EDGE_CURVE('',#31889,#32096,#34668,.T.); +#34668 = SURFACE_CURVE('',#34669,(#34673,#34679),.PCURVE_S1.); +#34669 = LINE('',#34670,#34671); +#34670 = CARTESIAN_POINT('',(2.25,-0.43,1.025)); +#34671 = VECTOR('',#34672,1.); +#34672 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#34673 = PCURVE('',#31925,#34674); +#34674 = DEFINITIONAL_REPRESENTATION('',(#34675),#34678); +#34675 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#34676,#34677),.UNSPECIFIED., + .F.,.F.,(2,2),(0.3,0.375),.PIECEWISE_BEZIER_KNOTS.); +#34676 = CARTESIAN_POINT('',(2.705,2.93089957531E-17)); +#34677 = CARTESIAN_POINT('',(2.712206703911,1.)); +#34678 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34679 = PCURVE('',#32133,#34680); +#34680 = DEFINITIONAL_REPRESENTATION('',(#34681),#34685); +#34681 = LINE('',#34682,#34683); +#34682 = CARTESIAN_POINT('',(-0.,0.)); +#34683 = VECTOR('',#34684,1.); +#34684 = DIRECTION('',(1.,0.)); +#34685 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34686 = ORIENTED_EDGE('',*,*,#32095,.F.); +#34687 = ADVANCED_FACE('',(#34688),#31958,.F.); +#34688 = FACE_BOUND('',#34689,.F.); +#34689 = EDGE_LOOP('',(#34690,#34691,#34692,#34714)); +#34690 = ORIENTED_EDGE('',*,*,#31942,.T.); +#34691 = ORIENTED_EDGE('',*,*,#31996,.T.); +#34692 = ORIENTED_EDGE('',*,*,#34693,.F.); +#34693 = EDGE_CURVE('',#34694,#31997,#34696,.T.); +#34694 = VERTEX_POINT('',#34695); +#34695 = CARTESIAN_POINT('',(1.7375,2.375,1.025)); +#34696 = SURFACE_CURVE('',#34697,(#34701,#34707),.PCURVE_S1.); +#34697 = LINE('',#34698,#34699); +#34698 = CARTESIAN_POINT('',(1.7375,2.375,1.025)); +#34699 = VECTOR('',#34700,1.); +#34700 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#34701 = PCURVE('',#31958,#34702); +#34702 = DEFINITIONAL_REPRESENTATION('',(#34703),#34706); +#34703 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#34704,#34705),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,0.194454364826),.PIECEWISE_BEZIER_KNOTS.); +#34704 = CARTESIAN_POINT('',(-3.328677979189E-16,1.)); +#34705 = CARTESIAN_POINT('',(0.247487373415,1.)); +#34706 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34707 = PCURVE('',#32284,#34708); +#34708 = DEFINITIONAL_REPRESENTATION('',(#34709),#34713); +#34709 = LINE('',#34710,#34711); +#34710 = CARTESIAN_POINT('',(2.520333281894E-17,1.463398608857E-16)); +#34711 = VECTOR('',#34712,1.); +#34712 = DIRECTION('',(1.,-5.45925346422E-16)); +#34713 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34714 = ORIENTED_EDGE('',*,*,#34715,.F.); +#34715 = EDGE_CURVE('',#31943,#34694,#34716,.T.); +#34716 = SURFACE_CURVE('',#34717,(#34720,#34727),.PCURVE_S1.); +#34717 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#34718,#34719),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#34718 = CARTESIAN_POINT('',(1.775,2.45,1.025)); +#34719 = CARTESIAN_POINT('',(1.7375,2.375,1.025)); +#34720 = PCURVE('',#31958,#34721); +#34721 = DEFINITIONAL_REPRESENTATION('',(#34722),#34726); +#34722 = LINE('',#34723,#34724); +#34723 = CARTESIAN_POINT('',(-1.427240192909E-16,-5.26430630895E-15)); +#34724 = VECTOR('',#34725,1.); +#34725 = DIRECTION('',(3.427360861369E-16,1.)); +#34726 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34727 = PCURVE('',#34728,#34733); +#34728 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#34729,#34730) + ,(#34731,#34732 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.55),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#34729 = CARTESIAN_POINT('',(-1.775,2.45,1.025)); +#34730 = CARTESIAN_POINT('',(-1.7375,2.375,1.025)); +#34731 = CARTESIAN_POINT('',(1.775,2.45,1.025)); +#34732 = CARTESIAN_POINT('',(1.7375,2.375,1.025)); +#34733 = DEFINITIONAL_REPRESENTATION('',(#34734),#34738); +#34734 = LINE('',#34735,#34736); +#34735 = CARTESIAN_POINT('',(3.55,1.042276600342E-15)); +#34736 = VECTOR('',#34737,1.); +#34737 = DIRECTION('',(4.440892098501E-16,1.)); +#34738 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34739 = ADVANCED_FACE('',(#34740),#31982,.F.); +#34740 = FACE_BOUND('',#34741,.F.); +#34741 = EDGE_LOOP('',(#34742,#34743,#34744,#34767)); +#34742 = ORIENTED_EDGE('',*,*,#32612,.T.); +#34743 = ORIENTED_EDGE('',*,*,#31970,.T.); +#34744 = ORIENTED_EDGE('',*,*,#34745,.F.); +#34745 = EDGE_CURVE('',#34746,#31943,#34748,.T.); +#34746 = VERTEX_POINT('',#34747); +#34747 = CARTESIAN_POINT('',(-1.775,2.45,1.025)); +#34748 = SURFACE_CURVE('',#34749,(#34753,#34760),.PCURVE_S1.); +#34749 = LINE('',#34750,#34751); +#34750 = CARTESIAN_POINT('',(-1.775,2.45,1.025)); +#34751 = VECTOR('',#34752,1.); +#34752 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#34753 = PCURVE('',#31982,#34754); +#34754 = DEFINITIONAL_REPRESENTATION('',(#34755),#34759); +#34755 = LINE('',#34756,#34757); +#34756 = CARTESIAN_POINT('',(0.,0.)); +#34757 = VECTOR('',#34758,1.); +#34758 = DIRECTION('',(1.,0.)); +#34759 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34760 = PCURVE('',#34728,#34761); +#34761 = DEFINITIONAL_REPRESENTATION('',(#34762),#34766); +#34762 = LINE('',#34763,#34764); +#34763 = CARTESIAN_POINT('',(3.586217722922E-17,1.041987532702E-15)); +#34764 = VECTOR('',#34765,1.); +#34765 = DIRECTION('',(1.,-3.335799961041E-15)); +#34766 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34767 = ORIENTED_EDGE('',*,*,#34768,.F.); +#34768 = EDGE_CURVE('',#32613,#34746,#34769,.T.); +#34769 = SURFACE_CURVE('',#34770,(#34773,#34779),.PCURVE_S1.); +#34770 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#34771,#34772),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#34771 = CARTESIAN_POINT('',(-1.775,2.45,0.825)); +#34772 = CARTESIAN_POINT('',(-1.775,2.45,1.025)); +#34773 = PCURVE('',#31982,#34774); +#34774 = DEFINITIONAL_REPRESENTATION('',(#34775),#34778); +#34775 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#34776,#34777),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#34776 = CARTESIAN_POINT('',(0.,-0.2)); +#34777 = CARTESIAN_POINT('',(0.,0.)); +#34778 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34779 = PCURVE('',#33057,#34780); +#34780 = DEFINITIONAL_REPRESENTATION('',(#34781),#34784); +#34781 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#34782,#34783),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#34782 = CARTESIAN_POINT('',(0.247487373415,-0.2)); +#34783 = CARTESIAN_POINT('',(0.247487373415,0.)); +#34784 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34785 = ADVANCED_FACE('',(#34786),#32284,.F.); +#34786 = FACE_BOUND('',#34787,.F.); +#34787 = EDGE_LOOP('',(#34788,#34789,#34790,#34812)); +#34788 = ORIENTED_EDGE('',*,*,#34693,.T.); +#34789 = ORIENTED_EDGE('',*,*,#32271,.T.); +#34790 = ORIENTED_EDGE('',*,*,#34791,.F.); +#34791 = EDGE_CURVE('',#34792,#32245,#34794,.T.); +#34792 = VERTEX_POINT('',#34793); +#34793 = CARTESIAN_POINT('',(1.680085640382,2.260171280765,1.75)); +#34794 = SURFACE_CURVE('',#34795,(#34799,#34805),.PCURVE_S1.); +#34795 = LINE('',#34796,#34797); +#34796 = CARTESIAN_POINT('',(1.680085640382,2.260171280765,1.75)); +#34797 = VECTOR('',#34798,1.); +#34798 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#34799 = PCURVE('',#32284,#34800); +#34800 = DEFINITIONAL_REPRESENTATION('',(#34801),#34804); +#34801 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#34802,#34803),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,0.113258198781),.PIECEWISE_BEZIER_KNOTS.); +#34802 = CARTESIAN_POINT('',(4.099913335811E-16,1.)); +#34803 = CARTESIAN_POINT('',(0.194454364826,1.)); +#34804 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34805 = PCURVE('',#32259,#34806); +#34806 = DEFINITIONAL_REPRESENTATION('',(#34807),#34811); +#34807 = LINE('',#34808,#34809); +#34808 = CARTESIAN_POINT('',(2.004597404435,-2.696727698935)); +#34809 = VECTOR('',#34810,1.); +#34810 = DIRECTION('',(0.989336133008,-0.145650320716)); +#34811 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34812 = ORIENTED_EDGE('',*,*,#34813,.F.); +#34813 = EDGE_CURVE('',#34694,#34792,#34814,.T.); +#34814 = SURFACE_CURVE('',#34815,(#34818,#34825),.PCURVE_S1.); +#34815 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#34816,#34817),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#34816 = CARTESIAN_POINT('',(1.7375,2.375,1.025)); +#34817 = CARTESIAN_POINT('',(1.680085640382,2.260171280765,1.75)); +#34818 = PCURVE('',#32284,#34819); +#34819 = DEFINITIONAL_REPRESENTATION('',(#34820),#34824); +#34820 = LINE('',#34821,#34822); +#34821 = CARTESIAN_POINT('',(2.520333281894E-17,1.463398608857E-16)); +#34822 = VECTOR('',#34823,1.); +#34823 = DIRECTION('',(1.127506532616E-16,1.)); +#34824 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34825 = PCURVE('',#34826,#34831); +#34826 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#34827,#34828) + ,(#34829,#34830 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.475),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#34827 = CARTESIAN_POINT('',(-1.7375,2.375,1.025)); +#34828 = CARTESIAN_POINT('',(-1.680085640382,2.260171280765,1.75)); +#34829 = CARTESIAN_POINT('',(1.7375,2.375,1.025)); +#34830 = CARTESIAN_POINT('',(1.680085640382,2.260171280765,1.75)); +#34831 = DEFINITIONAL_REPRESENTATION('',(#34832),#34836); +#34832 = LINE('',#34833,#34834); +#34833 = CARTESIAN_POINT('',(3.475,2.229134430816E-16)); +#34834 = VECTOR('',#34835,1.); +#34835 = DIRECTION('',(0.,1.)); +#34836 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34837 = ADVANCED_FACE('',(#34838,#34992),#32259,.F.); +#34838 = FACE_BOUND('',#34839,.F.); +#34839 = EDGE_LOOP('',(#34840,#34862,#34863,#34864,#34886,#34913,#34940, + #34967)); +#34840 = ORIENTED_EDGE('',*,*,#34841,.T.); +#34841 = EDGE_CURVE('',#34842,#34792,#34844,.T.); +#34842 = VERTEX_POINT('',#34843); +#34843 = CARTESIAN_POINT('',(-1.680085640382,2.260171280765,1.75)); +#34844 = SURFACE_CURVE('',#34845,(#34849,#34856),.PCURVE_S1.); +#34845 = LINE('',#34846,#34847); +#34846 = CARTESIAN_POINT('',(-1.680085640382,2.260171280765,1.75)); +#34847 = VECTOR('',#34848,1.); +#34848 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#34849 = PCURVE('',#32259,#34850); +#34850 = DEFINITIONAL_REPRESENTATION('',(#34851),#34855); +#34851 = LINE('',#34852,#34853); +#34852 = CARTESIAN_POINT('',(0.,-0.)); +#34853 = VECTOR('',#34854,1.); +#34854 = DIRECTION('',(0.596575959062,-0.802556617983)); +#34855 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34856 = PCURVE('',#34826,#34857); +#34857 = DEFINITIONAL_REPRESENTATION('',(#34858),#34861); +#34858 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#34859,#34860),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,3.360171280764),.PIECEWISE_BEZIER_KNOTS.); +#34859 = CARTESIAN_POINT('',(2.75143737505E-16,1.)); +#34860 = CARTESIAN_POINT('',(3.475,1.)); +#34861 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34862 = ORIENTED_EDGE('',*,*,#34791,.T.); +#34863 = ORIENTED_EDGE('',*,*,#32244,.T.); +#34864 = ORIENTED_EDGE('',*,*,#34865,.T.); +#34865 = EDGE_CURVE('',#32218,#34866,#34868,.T.); +#34866 = VERTEX_POINT('',#34867); +#34867 = CARTESIAN_POINT('',(1.680085640382,-2.260171280765,1.75)); +#34868 = SURFACE_CURVE('',#34869,(#34873,#34880),.PCURVE_S1.); +#34869 = LINE('',#34870,#34871); +#34870 = CARTESIAN_POINT('',(1.760171280765,-2.180085640382,1.75)); +#34871 = VECTOR('',#34872,1.); +#34872 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#34873 = PCURVE('',#32259,#34874); +#34874 = DEFINITIONAL_REPRESENTATION('',(#34875),#34879); +#34875 = LINE('',#34876,#34877); +#34876 = CARTESIAN_POINT('',(5.615932149767,-0.112050428413)); +#34877 = VECTOR('',#34878,1.); +#34878 = DIRECTION('',(0.145650320716,0.989336133008)); +#34879 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34880 = PCURVE('',#32232,#34881); +#34881 = DEFINITIONAL_REPRESENTATION('',(#34882),#34885); +#34882 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#34883,#34884),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,0.113258198781),.PIECEWISE_BEZIER_KNOTS.); +#34883 = CARTESIAN_POINT('',(-1.316046174369E-16,1.)); +#34884 = CARTESIAN_POINT('',(0.194454364826,1.)); +#34885 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34886 = ORIENTED_EDGE('',*,*,#34887,.T.); +#34887 = EDGE_CURVE('',#34866,#34888,#34890,.T.); +#34888 = VERTEX_POINT('',#34889); +#34889 = CARTESIAN_POINT('',(-1.680085640382,-2.260171280765,1.75)); +#34890 = SURFACE_CURVE('',#34891,(#34895,#34902),.PCURVE_S1.); +#34891 = LINE('',#34892,#34893); +#34892 = CARTESIAN_POINT('',(1.680085640382,-2.260171280765,1.75)); +#34893 = VECTOR('',#34894,1.); +#34894 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#34895 = PCURVE('',#32259,#34896); +#34896 = DEFINITIONAL_REPRESENTATION('',(#34897),#34901); +#34897 = LINE('',#34898,#34899); +#34898 = CARTESIAN_POINT('',(5.632428242743,-2.39808173319E-14)); +#34899 = VECTOR('',#34900,1.); +#34900 = DIRECTION('',(-0.596575959062,0.802556617983)); +#34901 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34902 = PCURVE('',#34903,#34908); +#34903 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#34904,#34905) + ,(#34906,#34907 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.475),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#34904 = CARTESIAN_POINT('',(1.7375,-2.375,1.025)); +#34905 = CARTESIAN_POINT('',(1.680085640382,-2.260171280765,1.75)); +#34906 = CARTESIAN_POINT('',(-1.7375,-2.375,1.025)); +#34907 = CARTESIAN_POINT('',(-1.680085640382,-2.260171280765,1.75)); +#34908 = DEFINITIONAL_REPRESENTATION('',(#34909),#34912); +#34909 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#34910,#34911),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,3.360171280764),.PIECEWISE_BEZIER_KNOTS.); +#34910 = CARTESIAN_POINT('',(2.75143737505E-16,1.)); +#34911 = CARTESIAN_POINT('',(3.475,1.)); +#34912 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34913 = ORIENTED_EDGE('',*,*,#34914,.T.); +#34914 = EDGE_CURVE('',#34888,#34915,#34917,.T.); +#34915 = VERTEX_POINT('',#34916); +#34916 = CARTESIAN_POINT('',(-1.760171280765,-2.180085640382,1.75)); +#34917 = SURFACE_CURVE('',#34918,(#34922,#34929),.PCURVE_S1.); +#34918 = LINE('',#34919,#34920); +#34919 = CARTESIAN_POINT('',(-1.680085640382,-2.260171280765,1.75)); +#34920 = VECTOR('',#34921,1.); +#34921 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#34922 = PCURVE('',#32259,#34923); +#34923 = DEFINITIONAL_REPRESENTATION('',(#34924),#34928); +#34924 = LINE('',#34925,#34926); +#34925 = CARTESIAN_POINT('',(3.627830838308,2.696727698935)); +#34926 = VECTOR('',#34927,1.); +#34927 = DIRECTION('',(-0.989336133008,0.145650320716)); +#34928 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34929 = PCURVE('',#34930,#34935); +#34930 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#34931,#34932) + ,(#34933,#34934 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#34931 = CARTESIAN_POINT('',(-1.7375,-2.375,1.025)); +#34932 = CARTESIAN_POINT('',(-1.680085640382,-2.260171280765,1.75)); +#34933 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#34934 = CARTESIAN_POINT('',(-1.760171280765,-2.180085640382,1.75)); +#34935 = DEFINITIONAL_REPRESENTATION('',(#34936),#34939); +#34936 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#34937,#34938),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,0.113258198781),.PIECEWISE_BEZIER_KNOTS.); +#34937 = CARTESIAN_POINT('',(4.099913335811E-16,1.)); +#34938 = CARTESIAN_POINT('',(0.194454364826,1.)); +#34939 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34940 = ORIENTED_EDGE('',*,*,#34941,.T.); +#34941 = EDGE_CURVE('',#34915,#34942,#34944,.T.); +#34942 = VERTEX_POINT('',#34943); +#34943 = CARTESIAN_POINT('',(-1.760171280765,2.180085640382,1.75)); +#34944 = SURFACE_CURVE('',#34945,(#34949,#34956),.PCURVE_S1.); +#34945 = LINE('',#34946,#34947); +#34946 = CARTESIAN_POINT('',(-1.760171280765,-2.180085640382,1.75)); +#34947 = VECTOR('',#34948,1.); +#34948 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#34949 = PCURVE('',#32259,#34950); +#34950 = DEFINITIONAL_REPRESENTATION('',(#34951),#34955); +#34951 = LINE('',#34952,#34953); +#34952 = CARTESIAN_POINT('',(3.515780409894,2.713223791911)); +#34953 = VECTOR('',#34954,1.); +#34954 = DIRECTION('',(-0.802556617983,-0.596575959062)); +#34955 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34956 = PCURVE('',#34957,#34962); +#34957 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#34958,#34959) + ,(#34960,#34961 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.475),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#34958 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#34959 = CARTESIAN_POINT('',(-1.760171280765,-2.180085640382,1.75)); +#34960 = CARTESIAN_POINT('',(-1.875,2.2375,1.025)); +#34961 = CARTESIAN_POINT('',(-1.760171280765,2.180085640382,1.75)); +#34962 = DEFINITIONAL_REPRESENTATION('',(#34963),#34966); +#34963 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#34964,#34965),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,4.360171280764),.PIECEWISE_BEZIER_KNOTS.); +#34964 = CARTESIAN_POINT('',(-3.026276149984E-17,1.)); +#34965 = CARTESIAN_POINT('',(4.475,1.)); +#34966 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34967 = ORIENTED_EDGE('',*,*,#34968,.T.); +#34968 = EDGE_CURVE('',#34942,#34842,#34969,.T.); +#34969 = SURFACE_CURVE('',#34970,(#34974,#34981),.PCURVE_S1.); +#34970 = LINE('',#34971,#34972); +#34971 = CARTESIAN_POINT('',(-1.760171280765,2.180085640382,1.75)); +#34972 = VECTOR('',#34973,1.); +#34973 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#34974 = PCURVE('',#32259,#34975); +#34975 = DEFINITIONAL_REPRESENTATION('',(#34976),#34980); +#34976 = LINE('',#34977,#34978); +#34977 = CARTESIAN_POINT('',(1.649609297621E-02,0.112050428413)); +#34978 = VECTOR('',#34979,1.); +#34979 = DIRECTION('',(-0.145650320716,-0.989336133008)); +#34980 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34981 = PCURVE('',#34982,#34987); +#34982 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#34983,#34984) + ,(#34985,#34986 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.194454364826),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#34983 = CARTESIAN_POINT('',(-1.875,2.2375,1.025)); +#34984 = CARTESIAN_POINT('',(-1.760171280765,2.180085640382,1.75)); +#34985 = CARTESIAN_POINT('',(-1.7375,2.375,1.025)); +#34986 = CARTESIAN_POINT('',(-1.680085640382,2.260171280765,1.75)); +#34987 = DEFINITIONAL_REPRESENTATION('',(#34988),#34991); +#34988 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#34989,#34990),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,0.113258198781),.PIECEWISE_BEZIER_KNOTS.); +#34989 = CARTESIAN_POINT('',(-1.316046174369E-16,1.)); +#34990 = CARTESIAN_POINT('',(0.194454364826,1.)); +#34991 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#34992 = FACE_BOUND('',#34993,.F.); +#34993 = EDGE_LOOP('',(#34994)); +#34994 = ORIENTED_EDGE('',*,*,#34995,.T.); +#34995 = EDGE_CURVE('',#34996,#34996,#34998,.T.); +#34996 = VERTEX_POINT('',#34997); +#34997 = CARTESIAN_POINT('',(-1.110171280765,1.310171280765,1.75)); +#34998 = SURFACE_CURVE('',#34999,(#35004,#35015),.PCURVE_S1.); +#34999 = CIRCLE('',#35000,0.3); +#35000 = AXIS2_PLACEMENT_3D('',#35001,#35002,#35003); +#35001 = CARTESIAN_POINT('',(-1.110171280765,1.610171280765,1.75)); +#35002 = DIRECTION('',(-0.,0.,1.)); +#35003 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#35004 = PCURVE('',#32259,#35005); +#35005 = DEFINITIONAL_REPRESENTATION('',(#35006),#35014); +#35006 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#35007,#35008,#35009,#35010 + ,#35011,#35012,#35013),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#35007 = CARTESIAN_POINT('',(1.102425992756,0.109358620115)); +#35008 = CARTESIAN_POINT('',(1.412415954257,-0.307662031375)); +#35009 = CARTESIAN_POINT('',(0.896270495414,-0.367610887208)); +#35010 = CARTESIAN_POINT('',(0.380125036571,-0.427559743041)); +#35011 = CARTESIAN_POINT('',(0.586280533913,4.940976428144E-02)); +#35012 = CARTESIAN_POINT('',(0.792436031255,0.526379271604)); +#35013 = CARTESIAN_POINT('',(1.102425992756,0.109358620115)); +#35014 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35015 = PCURVE('',#35016,#35021); +#35016 = CYLINDRICAL_SURFACE('',#35017,0.3); +#35017 = AXIS2_PLACEMENT_3D('',#35018,#35019,#35020); +#35018 = CARTESIAN_POINT('',(-1.110171280765,1.610171280765,1.75)); +#35019 = DIRECTION('',(-0.,0.,-1.)); +#35020 = DIRECTION('',(2.22044604925E-16,-1.,-0.)); +#35021 = DEFINITIONAL_REPRESENTATION('',(#35022),#35026); +#35022 = LINE('',#35023,#35024); +#35023 = CARTESIAN_POINT('',(6.28318530718,0.)); +#35024 = VECTOR('',#35025,1.); +#35025 = DIRECTION('',(-1.,0.)); +#35026 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35027 = ADVANCED_FACE('',(#35028),#32232,.F.); +#35028 = FACE_BOUND('',#35029,.F.); +#35029 = EDGE_LOOP('',(#35030,#35052,#35072,#35073)); +#35030 = ORIENTED_EDGE('',*,*,#35031,.T.); +#35031 = EDGE_CURVE('',#32196,#35032,#35034,.T.); +#35032 = VERTEX_POINT('',#35033); +#35033 = CARTESIAN_POINT('',(1.7375,-2.375,1.025)); +#35034 = SURFACE_CURVE('',#35035,(#35039,#35046),.PCURVE_S1.); +#35035 = LINE('',#35036,#35037); +#35036 = CARTESIAN_POINT('',(1.875,-2.2375,1.025)); +#35037 = VECTOR('',#35038,1.); +#35038 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#35039 = PCURVE('',#32232,#35040); +#35040 = DEFINITIONAL_REPRESENTATION('',(#35041),#35045); +#35041 = LINE('',#35042,#35043); +#35042 = CARTESIAN_POINT('',(-1.318037530753E-16,1.463330846146E-16)); +#35043 = VECTOR('',#35044,1.); +#35044 = DIRECTION('',(1.,1.81974050535E-16)); +#35045 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35046 = PCURVE('',#33108,#35047); +#35047 = DEFINITIONAL_REPRESENTATION('',(#35048),#35051); +#35048 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#35049,#35050),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,0.194454364826),.PIECEWISE_BEZIER_KNOTS.); +#35049 = CARTESIAN_POINT('',(5.446312357614E-16,1.)); +#35050 = CARTESIAN_POINT('',(0.247487373415,1.)); +#35051 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35052 = ORIENTED_EDGE('',*,*,#35053,.T.); +#35053 = EDGE_CURVE('',#35032,#34866,#35054,.T.); +#35054 = SURFACE_CURVE('',#35055,(#35058,#35065),.PCURVE_S1.); +#35055 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#35056,#35057),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#35056 = CARTESIAN_POINT('',(1.7375,-2.375,1.025)); +#35057 = CARTESIAN_POINT('',(1.680085640382,-2.260171280765,1.75)); +#35058 = PCURVE('',#32232,#35059); +#35059 = DEFINITIONAL_REPRESENTATION('',(#35060),#35064); +#35060 = LINE('',#35061,#35062); +#35061 = CARTESIAN_POINT('',(0.194454364826,1.463361621183E-16)); +#35062 = VECTOR('',#35063,1.); +#35063 = DIRECTION('',(-5.273559366969E-16,1.)); +#35064 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35065 = PCURVE('',#34903,#35066); +#35066 = DEFINITIONAL_REPRESENTATION('',(#35067),#35071); +#35067 = LINE('',#35068,#35069); +#35068 = CARTESIAN_POINT('',(-1.062162001898E-16,3.830465704938E-18)); +#35069 = VECTOR('',#35070,1.); +#35070 = DIRECTION('',(3.757404270073E-16,1.)); +#35071 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35072 = ORIENTED_EDGE('',*,*,#34865,.F.); +#35073 = ORIENTED_EDGE('',*,*,#32217,.F.); +#35074 = ADVANCED_FACE('',(#35075),#32083,.F.); +#35075 = FACE_BOUND('',#35076,.F.); +#35076 = EDGE_LOOP('',(#35077,#35078,#35099,#35100,#35101,#35102)); +#35077 = ORIENTED_EDGE('',*,*,#32586,.F.); +#35078 = ORIENTED_EDGE('',*,*,#35079,.T.); +#35079 = EDGE_CURVE('',#32558,#34327,#35080,.T.); +#35080 = SURFACE_CURVE('',#35081,(#35085,#35092),.PCURVE_S1.); +#35081 = LINE('',#35082,#35083); +#35082 = CARTESIAN_POINT('',(2.25,0.84,1.025)); +#35083 = VECTOR('',#35084,1.); +#35084 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#35085 = PCURVE('',#32083,#35086); +#35086 = DEFINITIONAL_REPRESENTATION('',(#35087),#35091); +#35087 = LINE('',#35088,#35089); +#35088 = CARTESIAN_POINT('',(-0.,0.)); +#35089 = VECTOR('',#35090,1.); +#35090 = DIRECTION('',(0.,-1.)); +#35091 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35092 = PCURVE('',#32574,#35093); +#35093 = DEFINITIONAL_REPRESENTATION('',(#35094),#35098); +#35094 = LINE('',#35095,#35096); +#35095 = CARTESIAN_POINT('',(4.712388980385,0.)); +#35096 = VECTOR('',#35097,1.); +#35097 = DIRECTION('',(0.,-1.)); +#35098 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35099 = ORIENTED_EDGE('',*,*,#34350,.T.); +#35100 = ORIENTED_EDGE('',*,*,#34646,.T.); +#35101 = ORIENTED_EDGE('',*,*,#32067,.F.); +#35102 = ORIENTED_EDGE('',*,*,#32301,.F.); +#35103 = ADVANCED_FACE('',(#35104),#32183,.F.); +#35104 = FACE_BOUND('',#35105,.F.); +#35105 = EDGE_LOOP('',(#35106,#35107,#35128,#35129,#35130,#35131)); +#35106 = ORIENTED_EDGE('',*,*,#33698,.F.); +#35107 = ORIENTED_EDGE('',*,*,#35108,.T.); +#35108 = EDGE_CURVE('',#33675,#33357,#35109,.T.); +#35109 = SURFACE_CURVE('',#35110,(#35114,#35121),.PCURVE_S1.); +#35110 = LINE('',#35111,#35112); +#35111 = CARTESIAN_POINT('',(2.25,-1.7,1.025)); +#35112 = VECTOR('',#35113,1.); +#35113 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#35114 = PCURVE('',#32183,#35115); +#35115 = DEFINITIONAL_REPRESENTATION('',(#35116),#35120); +#35116 = LINE('',#35117,#35118); +#35117 = CARTESIAN_POINT('',(-0.,0.)); +#35118 = VECTOR('',#35119,1.); +#35119 = DIRECTION('',(0.,-1.)); +#35120 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35121 = PCURVE('',#33373,#35122); +#35122 = DEFINITIONAL_REPRESENTATION('',(#35123),#35127); +#35123 = LINE('',#35124,#35125); +#35124 = CARTESIAN_POINT('',(4.712388980385,0.)); +#35125 = VECTOR('',#35126,1.); +#35126 = DIRECTION('',(0.,-1.)); +#35127 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35128 = ORIENTED_EDGE('',*,*,#33385,.T.); +#35129 = ORIENTED_EDGE('',*,*,#33409,.T.); +#35130 = ORIENTED_EDGE('',*,*,#32167,.F.); +#35131 = ORIENTED_EDGE('',*,*,#34055,.F.); +#35132 = ADVANCED_FACE('',(#35133),#32133,.F.); +#35133 = FACE_BOUND('',#35134,.F.); +#35134 = EDGE_LOOP('',(#35135,#35136,#35157,#35158,#35159,#35160)); +#35135 = ORIENTED_EDGE('',*,*,#34595,.F.); +#35136 = ORIENTED_EDGE('',*,*,#35137,.T.); +#35137 = EDGE_CURVE('',#34572,#33982,#35138,.T.); +#35138 = SURFACE_CURVE('',#35139,(#35143,#35150),.PCURVE_S1.); +#35139 = LINE('',#35140,#35141); +#35140 = CARTESIAN_POINT('',(2.25,-0.43,1.025)); +#35141 = VECTOR('',#35142,1.); +#35142 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#35143 = PCURVE('',#32133,#35144); +#35144 = DEFINITIONAL_REPRESENTATION('',(#35145),#35149); +#35145 = LINE('',#35146,#35147); +#35146 = CARTESIAN_POINT('',(-0.,0.)); +#35147 = VECTOR('',#35148,1.); +#35148 = DIRECTION('',(0.,-1.)); +#35149 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35150 = PCURVE('',#33998,#35151); +#35151 = DEFINITIONAL_REPRESENTATION('',(#35152),#35156); +#35152 = LINE('',#35153,#35154); +#35153 = CARTESIAN_POINT('',(4.712388980385,0.)); +#35154 = VECTOR('',#35155,1.); +#35155 = DIRECTION('',(0.,-1.)); +#35156 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35157 = ORIENTED_EDGE('',*,*,#34010,.T.); +#35158 = ORIENTED_EDGE('',*,*,#34034,.T.); +#35159 = ORIENTED_EDGE('',*,*,#32117,.F.); +#35160 = ORIENTED_EDGE('',*,*,#34667,.F.); +#35161 = ADVANCED_FACE('',(#35162),#32574,.T.); +#35162 = FACE_BOUND('',#35163,.T.); +#35163 = EDGE_LOOP('',(#35164,#35165,#35166,#35167)); +#35164 = ORIENTED_EDGE('',*,*,#32557,.T.); +#35165 = ORIENTED_EDGE('',*,*,#35079,.T.); +#35166 = ORIENTED_EDGE('',*,*,#34326,.F.); +#35167 = ORIENTED_EDGE('',*,*,#35168,.F.); +#35168 = EDGE_CURVE('',#32530,#34304,#35169,.T.); +#35169 = SURFACE_CURVE('',#35170,(#35174,#35181),.PCURVE_S1.); +#35170 = LINE('',#35171,#35172); +#35171 = CARTESIAN_POINT('',(2.55,0.84,0.725)); +#35172 = VECTOR('',#35173,1.); +#35173 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#35174 = PCURVE('',#32574,#35175); +#35175 = DEFINITIONAL_REPRESENTATION('',(#35176),#35180); +#35176 = LINE('',#35177,#35178); +#35177 = CARTESIAN_POINT('',(6.28318530718,-1.110223024625E-16)); +#35178 = VECTOR('',#35179,1.); +#35179 = DIRECTION('',(0.,-1.)); +#35180 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35181 = PCURVE('',#32545,#35182); +#35182 = DEFINITIONAL_REPRESENTATION('',(#35183),#35187); +#35183 = LINE('',#35184,#35185); +#35184 = CARTESIAN_POINT('',(0.425,0.)); +#35185 = VECTOR('',#35186,1.); +#35186 = DIRECTION('',(0.,-1.)); +#35187 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35188 = ADVANCED_FACE('',(#35189),#32545,.F.); +#35189 = FACE_BOUND('',#35190,.F.); +#35190 = EDGE_LOOP('',(#35191,#35212,#35213,#35214)); +#35191 = ORIENTED_EDGE('',*,*,#35192,.T.); +#35192 = EDGE_CURVE('',#32497,#34276,#35193,.T.); +#35193 = SURFACE_CURVE('',#35194,(#35198,#35205),.PCURVE_S1.); +#35194 = LINE('',#35195,#35196); +#35195 = CARTESIAN_POINT('',(2.55,0.84,0.3)); +#35196 = VECTOR('',#35197,1.); +#35197 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#35198 = PCURVE('',#32545,#35199); +#35199 = DEFINITIONAL_REPRESENTATION('',(#35200),#35204); +#35200 = LINE('',#35201,#35202); +#35201 = CARTESIAN_POINT('',(0.,0.)); +#35202 = VECTOR('',#35203,1.); +#35203 = DIRECTION('',(0.,-1.)); +#35204 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35205 = PCURVE('',#32517,#35206); +#35206 = DEFINITIONAL_REPRESENTATION('',(#35207),#35211); +#35207 = LINE('',#35208,#35209); +#35208 = CARTESIAN_POINT('',(1.570796326795,0.)); +#35209 = VECTOR('',#35210,1.); +#35210 = DIRECTION('',(0.,-1.)); +#35211 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35212 = ORIENTED_EDGE('',*,*,#34303,.T.); +#35213 = ORIENTED_EDGE('',*,*,#35168,.F.); +#35214 = ORIENTED_EDGE('',*,*,#32529,.F.); +#35215 = ADVANCED_FACE('',(#35216),#32517,.F.); +#35216 = FACE_BOUND('',#35217,.F.); +#35217 = EDGE_LOOP('',(#35218,#35239,#35240,#35241)); +#35218 = ORIENTED_EDGE('',*,*,#35219,.T.); +#35219 = EDGE_CURVE('',#32469,#34253,#35220,.T.); +#35220 = SURFACE_CURVE('',#35221,(#35225,#35232),.PCURVE_S1.); +#35221 = LINE('',#35222,#35223); +#35222 = CARTESIAN_POINT('',(2.65,0.84,0.2)); +#35223 = VECTOR('',#35224,1.); +#35224 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#35225 = PCURVE('',#32517,#35226); +#35226 = DEFINITIONAL_REPRESENTATION('',(#35227),#35231); +#35227 = LINE('',#35228,#35229); +#35228 = CARTESIAN_POINT('',(0.,0.)); +#35229 = VECTOR('',#35230,1.); +#35230 = DIRECTION('',(0.,-1.)); +#35231 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35232 = PCURVE('',#32484,#35233); +#35233 = DEFINITIONAL_REPRESENTATION('',(#35234),#35238); +#35234 = LINE('',#35235,#35236); +#35235 = CARTESIAN_POINT('',(0.35,7.771561172375E-17)); +#35236 = VECTOR('',#35237,1.); +#35237 = DIRECTION('',(0.,-1.)); +#35238 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35239 = ORIENTED_EDGE('',*,*,#34275,.T.); +#35240 = ORIENTED_EDGE('',*,*,#35192,.F.); +#35241 = ORIENTED_EDGE('',*,*,#32496,.F.); +#35242 = ADVANCED_FACE('',(#35243),#32484,.F.); +#35243 = FACE_BOUND('',#35244,.F.); +#35244 = EDGE_LOOP('',(#35245,#35266,#35267,#35268)); +#35245 = ORIENTED_EDGE('',*,*,#35246,.T.); +#35246 = EDGE_CURVE('',#32441,#34230,#35247,.T.); +#35247 = SURFACE_CURVE('',#35248,(#35252,#35259),.PCURVE_S1.); +#35248 = LINE('',#35249,#35250); +#35249 = CARTESIAN_POINT('',(3.,0.84,0.2)); +#35250 = VECTOR('',#35251,1.); +#35251 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#35252 = PCURVE('',#32484,#35253); +#35253 = DEFINITIONAL_REPRESENTATION('',(#35254),#35258); +#35254 = LINE('',#35255,#35256); +#35255 = CARTESIAN_POINT('',(-0.,0.)); +#35256 = VECTOR('',#35257,1.); +#35257 = DIRECTION('',(0.,-1.)); +#35258 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35259 = PCURVE('',#32456,#35260); +#35260 = DEFINITIONAL_REPRESENTATION('',(#35261),#35265); +#35261 = LINE('',#35262,#35263); +#35262 = CARTESIAN_POINT('',(0.2,0.)); +#35263 = VECTOR('',#35264,1.); +#35264 = DIRECTION('',(0.,-1.)); +#35265 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35266 = ORIENTED_EDGE('',*,*,#34252,.T.); +#35267 = ORIENTED_EDGE('',*,*,#35219,.F.); +#35268 = ORIENTED_EDGE('',*,*,#32468,.F.); +#35269 = ADVANCED_FACE('',(#35270),#32456,.F.); +#35270 = FACE_BOUND('',#35271,.F.); +#35271 = EDGE_LOOP('',(#35272,#35293,#35294,#35295)); +#35272 = ORIENTED_EDGE('',*,*,#35273,.T.); +#35273 = EDGE_CURVE('',#32413,#34207,#35274,.T.); +#35274 = SURFACE_CURVE('',#35275,(#35279,#35286),.PCURVE_S1.); +#35275 = LINE('',#35276,#35277); +#35276 = CARTESIAN_POINT('',(3.,0.84,5.551115123126E-17)); +#35277 = VECTOR('',#35278,1.); +#35278 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#35279 = PCURVE('',#32456,#35280); +#35280 = DEFINITIONAL_REPRESENTATION('',(#35281),#35285); +#35281 = LINE('',#35282,#35283); +#35282 = CARTESIAN_POINT('',(0.,0.)); +#35283 = VECTOR('',#35284,1.); +#35284 = DIRECTION('',(0.,-1.)); +#35285 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35286 = PCURVE('',#32428,#35287); +#35287 = DEFINITIONAL_REPRESENTATION('',(#35288),#35292); +#35288 = LINE('',#35289,#35290); +#35289 = CARTESIAN_POINT('',(0.35,-7.771561172375E-17)); +#35290 = VECTOR('',#35291,1.); +#35291 = DIRECTION('',(0.,-1.)); +#35292 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35293 = ORIENTED_EDGE('',*,*,#34229,.T.); +#35294 = ORIENTED_EDGE('',*,*,#35246,.F.); +#35295 = ORIENTED_EDGE('',*,*,#32440,.F.); +#35296 = ADVANCED_FACE('',(#35297),#32428,.F.); +#35297 = FACE_BOUND('',#35298,.F.); +#35298 = EDGE_LOOP('',(#35299,#35320,#35321,#35322)); +#35299 = ORIENTED_EDGE('',*,*,#35300,.T.); +#35300 = EDGE_CURVE('',#32384,#34183,#35301,.T.); +#35301 = SURFACE_CURVE('',#35302,(#35306,#35313),.PCURVE_S1.); +#35302 = LINE('',#35303,#35304); +#35303 = CARTESIAN_POINT('',(2.65,0.84,5.551115123126E-17)); +#35304 = VECTOR('',#35305,1.); +#35305 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#35306 = PCURVE('',#32428,#35307); +#35307 = DEFINITIONAL_REPRESENTATION('',(#35308),#35312); +#35308 = LINE('',#35309,#35310); +#35309 = CARTESIAN_POINT('',(0.,0.)); +#35310 = VECTOR('',#35311,1.); +#35311 = DIRECTION('',(0.,-1.)); +#35312 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35313 = PCURVE('',#32400,#35314); +#35314 = DEFINITIONAL_REPRESENTATION('',(#35315),#35319); +#35315 = LINE('',#35316,#35317); +#35316 = CARTESIAN_POINT('',(4.712388980385,0.)); +#35317 = VECTOR('',#35318,1.); +#35318 = DIRECTION('',(0.,-1.)); +#35319 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35320 = ORIENTED_EDGE('',*,*,#34206,.T.); +#35321 = ORIENTED_EDGE('',*,*,#35273,.F.); +#35322 = ORIENTED_EDGE('',*,*,#32412,.F.); +#35323 = ADVANCED_FACE('',(#35324),#32400,.T.); +#35324 = FACE_BOUND('',#35325,.T.); +#35325 = EDGE_LOOP('',(#35326,#35327,#35328,#35329)); +#35326 = ORIENTED_EDGE('',*,*,#32383,.T.); +#35327 = ORIENTED_EDGE('',*,*,#35300,.T.); +#35328 = ORIENTED_EDGE('',*,*,#34182,.F.); +#35329 = ORIENTED_EDGE('',*,*,#35330,.F.); +#35330 = EDGE_CURVE('',#32356,#34160,#35331,.T.); +#35331 = SURFACE_CURVE('',#35332,(#35336,#35343),.PCURVE_S1.); +#35332 = LINE('',#35333,#35334); +#35333 = CARTESIAN_POINT('',(2.35,0.84,0.3)); +#35334 = VECTOR('',#35335,1.); +#35335 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#35336 = PCURVE('',#32400,#35337); +#35337 = DEFINITIONAL_REPRESENTATION('',(#35338),#35342); +#35338 = LINE('',#35339,#35340); +#35339 = CARTESIAN_POINT('',(6.28318530718,0.)); +#35340 = VECTOR('',#35341,1.); +#35341 = DIRECTION('',(0.,-1.)); +#35342 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35343 = PCURVE('',#32371,#35344); +#35344 = DEFINITIONAL_REPRESENTATION('',(#35345),#35349); +#35345 = LINE('',#35346,#35347); +#35346 = CARTESIAN_POINT('',(0.425,-9.860761315258E-32)); +#35347 = VECTOR('',#35348,1.); +#35348 = DIRECTION('',(7.584527938158E-44,-1.)); +#35349 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35350 = ADVANCED_FACE('',(#35351),#32371,.F.); +#35351 = FACE_BOUND('',#35352,.F.); +#35352 = EDGE_LOOP('',(#35353,#35354,#35355,#35356)); +#35353 = ORIENTED_EDGE('',*,*,#34131,.T.); +#35354 = ORIENTED_EDGE('',*,*,#34159,.T.); +#35355 = ORIENTED_EDGE('',*,*,#35330,.F.); +#35356 = ORIENTED_EDGE('',*,*,#32355,.F.); +#35357 = ADVANCED_FACE('',(#35358),#32695,.F.); +#35358 = FACE_BOUND('',#35359,.F.); +#35359 = EDGE_LOOP('',(#35360,#35361,#35381,#35407)); +#35360 = ORIENTED_EDGE('',*,*,#32681,.T.); +#35361 = ORIENTED_EDGE('',*,*,#35362,.T.); +#35362 = EDGE_CURVE('',#32660,#35363,#35365,.T.); +#35363 = VERTEX_POINT('',#35364); +#35364 = CARTESIAN_POINT('',(-1.775,-2.45,1.025)); +#35365 = SURFACE_CURVE('',#35366,(#35369,#35375),.PCURVE_S1.); +#35366 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#35367,#35368),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#35367 = CARTESIAN_POINT('',(-1.775,-2.45,0.825)); +#35368 = CARTESIAN_POINT('',(-1.775,-2.45,1.025)); +#35369 = PCURVE('',#32695,#35370); +#35370 = DEFINITIONAL_REPRESENTATION('',(#35371),#35374); +#35371 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#35372,#35373),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#35372 = CARTESIAN_POINT('',(3.55,-0.2)); +#35373 = CARTESIAN_POINT('',(3.55,0.)); +#35374 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35375 = PCURVE('',#32748,#35376); +#35376 = DEFINITIONAL_REPRESENTATION('',(#35377),#35380); +#35377 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#35378,#35379),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#35378 = CARTESIAN_POINT('',(0.,-0.2)); +#35379 = CARTESIAN_POINT('',(0.,0.)); +#35380 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35381 = ORIENTED_EDGE('',*,*,#35382,.F.); +#35382 = EDGE_CURVE('',#33075,#35363,#35383,.T.); +#35383 = SURFACE_CURVE('',#35384,(#35388,#35395),.PCURVE_S1.); +#35384 = LINE('',#35385,#35386); +#35385 = CARTESIAN_POINT('',(1.775,-2.45,1.025)); +#35386 = VECTOR('',#35387,1.); +#35387 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#35388 = PCURVE('',#32695,#35389); +#35389 = DEFINITIONAL_REPRESENTATION('',(#35390),#35394); +#35390 = LINE('',#35391,#35392); +#35391 = CARTESIAN_POINT('',(0.,0.)); +#35392 = VECTOR('',#35393,1.); +#35393 = DIRECTION('',(1.,0.)); +#35394 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35395 = PCURVE('',#35396,#35401); +#35396 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#35397,#35398) + ,(#35399,#35400 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,3.55),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#35397 = CARTESIAN_POINT('',(1.775,-2.45,1.025)); +#35398 = CARTESIAN_POINT('',(1.7375,-2.375,1.025)); +#35399 = CARTESIAN_POINT('',(-1.775,-2.45,1.025)); +#35400 = CARTESIAN_POINT('',(-1.7375,-2.375,1.025)); +#35401 = DEFINITIONAL_REPRESENTATION('',(#35402),#35406); +#35402 = LINE('',#35403,#35404); +#35403 = CARTESIAN_POINT('',(3.586217722922E-17,1.041987532702E-15)); +#35404 = VECTOR('',#35405,1.); +#35405 = DIRECTION('',(1.,-3.335799961041E-15)); +#35406 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35407 = ORIENTED_EDGE('',*,*,#33074,.F.); +#35408 = ADVANCED_FACE('',(#35409),#32748,.F.); +#35409 = FACE_BOUND('',#35410,.F.); +#35410 = EDGE_LOOP('',(#35411,#35412,#35432,#35458)); +#35411 = ORIENTED_EDGE('',*,*,#32734,.T.); +#35412 = ORIENTED_EDGE('',*,*,#35413,.T.); +#35413 = EDGE_CURVE('',#32713,#35414,#35416,.T.); +#35414 = VERTEX_POINT('',#35415); +#35415 = CARTESIAN_POINT('',(-1.95,-2.275,1.025)); +#35416 = SURFACE_CURVE('',#35417,(#35420,#35426),.PCURVE_S1.); +#35417 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#35418,#35419),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#35418 = CARTESIAN_POINT('',(-1.95,-2.275,0.825)); +#35419 = CARTESIAN_POINT('',(-1.95,-2.275,1.025)); +#35420 = PCURVE('',#32748,#35421); +#35421 = DEFINITIONAL_REPRESENTATION('',(#35422),#35425); +#35422 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#35423,#35424),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#35423 = CARTESIAN_POINT('',(0.247487373415,-0.2)); +#35424 = CARTESIAN_POINT('',(0.247487373415,0.)); +#35425 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35426 = PCURVE('',#33025,#35427); +#35427 = DEFINITIONAL_REPRESENTATION('',(#35428),#35431); +#35428 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#35429,#35430),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#35429 = CARTESIAN_POINT('',(0.,-0.2)); +#35430 = CARTESIAN_POINT('',(0.,0.)); +#35431 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35432 = ORIENTED_EDGE('',*,*,#35433,.F.); +#35433 = EDGE_CURVE('',#35363,#35414,#35434,.T.); +#35434 = SURFACE_CURVE('',#35435,(#35439,#35446),.PCURVE_S1.); +#35435 = LINE('',#35436,#35437); +#35436 = CARTESIAN_POINT('',(-1.775,-2.45,1.025)); +#35437 = VECTOR('',#35438,1.); +#35438 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#35439 = PCURVE('',#32748,#35440); +#35440 = DEFINITIONAL_REPRESENTATION('',(#35441),#35445); +#35441 = LINE('',#35442,#35443); +#35442 = CARTESIAN_POINT('',(0.,0.)); +#35443 = VECTOR('',#35444,1.); +#35444 = DIRECTION('',(1.,0.)); +#35445 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35446 = PCURVE('',#35447,#35452); +#35447 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#35448,#35449) + ,(#35450,#35451 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#35448 = CARTESIAN_POINT('',(-1.775,-2.45,1.025)); +#35449 = CARTESIAN_POINT('',(-1.7375,-2.375,1.025)); +#35450 = CARTESIAN_POINT('',(-1.95,-2.275,1.025)); +#35451 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#35452 = DEFINITIONAL_REPRESENTATION('',(#35453),#35457); +#35453 = LINE('',#35454,#35455); +#35454 = CARTESIAN_POINT('',(-1.427240192909E-16,-5.26430630895E-15)); +#35455 = VECTOR('',#35456,1.); +#35456 = DIRECTION('',(1.,-4.801228329872E-15)); +#35457 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35458 = ORIENTED_EDGE('',*,*,#35362,.F.); +#35459 = ADVANCED_FACE('',(#35460),#33025,.F.); +#35460 = FACE_BOUND('',#35461,.F.); +#35461 = EDGE_LOOP('',(#35462,#35463,#35464,#35492)); +#35462 = ORIENTED_EDGE('',*,*,#35413,.F.); +#35463 = ORIENTED_EDGE('',*,*,#33011,.T.); +#35464 = ORIENTED_EDGE('',*,*,#35465,.T.); +#35465 = EDGE_CURVE('',#32984,#35466,#35468,.T.); +#35466 = VERTEX_POINT('',#35467); +#35467 = CARTESIAN_POINT('',(-1.95,-2.11,1.025)); +#35468 = SURFACE_CURVE('',#35469,(#35473,#35480),.PCURVE_S1.); +#35469 = LINE('',#35470,#35471); +#35470 = CARTESIAN_POINT('',(-1.95,-2.11,0.778829828783)); +#35471 = VECTOR('',#35472,1.); +#35472 = DIRECTION('',(0.,0.,1.)); +#35473 = PCURVE('',#33025,#35474); +#35474 = DEFINITIONAL_REPRESENTATION('',(#35475),#35479); +#35475 = LINE('',#35476,#35477); +#35476 = CARTESIAN_POINT('',(0.165,-0.246170171217)); +#35477 = VECTOR('',#35478,1.); +#35478 = DIRECTION('',(0.,1.)); +#35479 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35480 = PCURVE('',#35481,#35486); +#35481 = PLANE('',#35482); +#35482 = AXIS2_PLACEMENT_3D('',#35483,#35484,#35485); +#35483 = CARTESIAN_POINT('',(-2.41578967201,-2.11,0.532659657565)); +#35484 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#35485 = DIRECTION('',(0.,0.,1.)); +#35486 = DEFINITIONAL_REPRESENTATION('',(#35487),#35491); +#35487 = LINE('',#35488,#35489); +#35488 = CARTESIAN_POINT('',(0.246170171218,0.46578967201)); +#35489 = VECTOR('',#35490,1.); +#35490 = DIRECTION('',(1.,0.)); +#35491 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35492 = ORIENTED_EDGE('',*,*,#35493,.F.); +#35493 = EDGE_CURVE('',#35414,#35466,#35494,.T.); +#35494 = SURFACE_CURVE('',#35495,(#35499,#35506),.PCURVE_S1.); +#35495 = LINE('',#35496,#35497); +#35496 = CARTESIAN_POINT('',(-1.95,-2.275,1.025)); +#35497 = VECTOR('',#35498,1.); +#35498 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#35499 = PCURVE('',#33025,#35500); +#35500 = DEFINITIONAL_REPRESENTATION('',(#35501),#35505); +#35501 = LINE('',#35502,#35503); +#35502 = CARTESIAN_POINT('',(0.,0.)); +#35503 = VECTOR('',#35504,1.); +#35504 = DIRECTION('',(1.,0.)); +#35505 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35506 = PCURVE('',#35507,#35512); +#35507 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#35508,#35509) + ,(#35510,#35511 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.55),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#35508 = CARTESIAN_POINT('',(-1.95,-2.275,1.025)); +#35509 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#35510 = CARTESIAN_POINT('',(-1.95,2.275,1.025)); +#35511 = CARTESIAN_POINT('',(-1.875,2.2375,1.025)); +#35512 = DEFINITIONAL_REPRESENTATION('',(#35513),#35517); +#35513 = LINE('',#35514,#35515); +#35514 = CARTESIAN_POINT('',(-8.584601827189E-17,6.610125476969E-16)); +#35515 = VECTOR('',#35516,1.); +#35516 = DIRECTION('',(1.,-8.115046621091E-14)); +#35517 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35518 = ADVANCED_FACE('',(#35519),#32803,.F.); +#35519 = FACE_BOUND('',#35520,.F.); +#35520 = EDGE_LOOP('',(#35521,#35549,#35550,#35570)); +#35521 = ORIENTED_EDGE('',*,*,#35522,.F.); +#35522 = EDGE_CURVE('',#32788,#35523,#35525,.T.); +#35523 = VERTEX_POINT('',#35524); +#35524 = CARTESIAN_POINT('',(-1.95,2.11,1.025)); +#35525 = SURFACE_CURVE('',#35526,(#35530,#35537),.PCURVE_S1.); +#35526 = LINE('',#35527,#35528); +#35527 = CARTESIAN_POINT('',(-1.95,2.11,0.778829828783)); +#35528 = VECTOR('',#35529,1.); +#35529 = DIRECTION('',(0.,0.,1.)); +#35530 = PCURVE('',#32803,#35531); +#35531 = DEFINITIONAL_REPRESENTATION('',(#35532),#35536); +#35532 = LINE('',#35533,#35534); +#35533 = CARTESIAN_POINT('',(4.385,-0.246170171217)); +#35534 = VECTOR('',#35535,1.); +#35535 = DIRECTION('',(0.,1.)); +#35536 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35537 = PCURVE('',#35538,#35543); +#35538 = PLANE('',#35539); +#35539 = AXIS2_PLACEMENT_3D('',#35540,#35541,#35542); +#35540 = CARTESIAN_POINT('',(-2.41578967201,2.11,0.532659657565)); +#35541 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#35542 = DIRECTION('',(0.,0.,1.)); +#35543 = DEFINITIONAL_REPRESENTATION('',(#35544),#35548); +#35544 = LINE('',#35545,#35546); +#35545 = CARTESIAN_POINT('',(0.246170171218,0.46578967201)); +#35546 = VECTOR('',#35547,1.); +#35547 = DIRECTION('',(1.,0.)); +#35548 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35549 = ORIENTED_EDGE('',*,*,#32787,.T.); +#35550 = ORIENTED_EDGE('',*,*,#35551,.T.); +#35551 = EDGE_CURVE('',#32766,#35552,#35554,.T.); +#35552 = VERTEX_POINT('',#35553); +#35553 = CARTESIAN_POINT('',(-1.95,2.275,1.025)); +#35554 = SURFACE_CURVE('',#35555,(#35558,#35564),.PCURVE_S1.); +#35555 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#35556,#35557),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#35556 = CARTESIAN_POINT('',(-1.95,2.275,0.825)); +#35557 = CARTESIAN_POINT('',(-1.95,2.275,1.025)); +#35558 = PCURVE('',#32803,#35559); +#35559 = DEFINITIONAL_REPRESENTATION('',(#35560),#35563); +#35560 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#35561,#35562),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#35561 = CARTESIAN_POINT('',(4.55,-0.2)); +#35562 = CARTESIAN_POINT('',(4.55,0.)); +#35563 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35564 = PCURVE('',#33057,#35565); +#35565 = DEFINITIONAL_REPRESENTATION('',(#35566),#35569); +#35566 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#35567,#35568),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#35567 = CARTESIAN_POINT('',(0.,-0.2)); +#35568 = CARTESIAN_POINT('',(0.,0.)); +#35569 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35570 = ORIENTED_EDGE('',*,*,#35571,.F.); +#35571 = EDGE_CURVE('',#35523,#35552,#35572,.T.); +#35572 = SURFACE_CURVE('',#35573,(#35577,#35584),.PCURVE_S1.); +#35573 = LINE('',#35574,#35575); +#35574 = CARTESIAN_POINT('',(-1.95,-2.275,1.025)); +#35575 = VECTOR('',#35576,1.); +#35576 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#35577 = PCURVE('',#32803,#35578); +#35578 = DEFINITIONAL_REPRESENTATION('',(#35579),#35583); +#35579 = LINE('',#35580,#35581); +#35580 = CARTESIAN_POINT('',(0.,0.)); +#35581 = VECTOR('',#35582,1.); +#35582 = DIRECTION('',(1.,0.)); +#35583 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35584 = PCURVE('',#35585,#35590); +#35585 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#35586,#35587) + ,(#35588,#35589 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.55),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#35586 = CARTESIAN_POINT('',(-1.95,-2.275,1.025)); +#35587 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#35588 = CARTESIAN_POINT('',(-1.95,2.275,1.025)); +#35589 = CARTESIAN_POINT('',(-1.875,2.2375,1.025)); +#35590 = DEFINITIONAL_REPRESENTATION('',(#35591),#35595); +#35591 = LINE('',#35592,#35593); +#35592 = CARTESIAN_POINT('',(8.881784197001E-16,1.308297669345E-13)); +#35593 = VECTOR('',#35594,1.); +#35594 = DIRECTION('',(1.,-3.186124313148E-14)); +#35595 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35596 = ADVANCED_FACE('',(#35597),#32999,.F.); +#35597 = FACE_BOUND('',#35598,.F.); +#35598 = EDGE_LOOP('',(#35599,#35622,#35623,#35651)); +#35599 = ORIENTED_EDGE('',*,*,#35600,.F.); +#35600 = EDGE_CURVE('',#32984,#35601,#35603,.T.); +#35601 = VERTEX_POINT('',#35602); +#35602 = CARTESIAN_POINT('',(-2.25,-2.11,0.825)); +#35603 = SURFACE_CURVE('',#35604,(#35608,#35615),.PCURVE_S1.); +#35604 = LINE('',#35605,#35606); +#35605 = CARTESIAN_POINT('',(-1.8,-2.11,0.825)); +#35606 = VECTOR('',#35607,1.); +#35607 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#35608 = PCURVE('',#32999,#35609); +#35609 = DEFINITIONAL_REPRESENTATION('',(#35610),#35614); +#35610 = LINE('',#35611,#35612); +#35611 = CARTESIAN_POINT('',(0.,0.)); +#35612 = VECTOR('',#35613,1.); +#35613 = DIRECTION('',(1.,0.)); +#35614 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35615 = PCURVE('',#35481,#35616); +#35616 = DEFINITIONAL_REPRESENTATION('',(#35617),#35621); +#35617 = LINE('',#35618,#35619); +#35618 = CARTESIAN_POINT('',(0.292340342435,0.61578967201)); +#35619 = VECTOR('',#35620,1.); +#35620 = DIRECTION('',(0.,-1.)); +#35621 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35622 = ORIENTED_EDGE('',*,*,#32983,.T.); +#35623 = ORIENTED_EDGE('',*,*,#35624,.T.); +#35624 = EDGE_CURVE('',#32956,#35625,#35627,.T.); +#35625 = VERTEX_POINT('',#35626); +#35626 = CARTESIAN_POINT('',(-2.25,-1.7,0.825)); +#35627 = SURFACE_CURVE('',#35628,(#35632,#35639),.PCURVE_S1.); +#35628 = LINE('',#35629,#35630); +#35629 = CARTESIAN_POINT('',(-1.8,-1.7,0.825)); +#35630 = VECTOR('',#35631,1.); +#35631 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#35632 = PCURVE('',#32999,#35633); +#35633 = DEFINITIONAL_REPRESENTATION('',(#35634),#35638); +#35634 = LINE('',#35635,#35636); +#35635 = CARTESIAN_POINT('',(-4.082776925422E-17,-0.41)); +#35636 = VECTOR('',#35637,1.); +#35637 = DIRECTION('',(1.,0.)); +#35638 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35639 = PCURVE('',#35640,#35645); +#35640 = PLANE('',#35641); +#35641 = AXIS2_PLACEMENT_3D('',#35642,#35643,#35644); +#35642 = CARTESIAN_POINT('',(-2.41578967201,-1.7,0.532659657565)); +#35643 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#35644 = DIRECTION('',(0.,0.,1.)); +#35645 = DEFINITIONAL_REPRESENTATION('',(#35646),#35650); +#35646 = LINE('',#35647,#35648); +#35647 = CARTESIAN_POINT('',(0.292340342435,0.61578967201)); +#35648 = VECTOR('',#35649,1.); +#35649 = DIRECTION('',(0.,-1.)); +#35650 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35651 = ORIENTED_EDGE('',*,*,#35652,.F.); +#35652 = EDGE_CURVE('',#35601,#35625,#35653,.T.); +#35653 = SURFACE_CURVE('',#35654,(#35658,#35665),.PCURVE_S1.); +#35654 = LINE('',#35655,#35656); +#35655 = CARTESIAN_POINT('',(-2.25,-2.11,0.825)); +#35656 = VECTOR('',#35657,1.); +#35657 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#35658 = PCURVE('',#32999,#35659); +#35659 = DEFINITIONAL_REPRESENTATION('',(#35660),#35664); +#35660 = LINE('',#35661,#35662); +#35661 = CARTESIAN_POINT('',(0.45,-4.481096625463E-17)); +#35662 = VECTOR('',#35663,1.); +#35663 = DIRECTION('',(0.,-1.)); +#35664 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35665 = PCURVE('',#35666,#35671); +#35666 = CYLINDRICAL_SURFACE('',#35667,0.1); +#35667 = AXIS2_PLACEMENT_3D('',#35668,#35669,#35670); +#35668 = CARTESIAN_POINT('',(-2.25,-2.11,0.725)); +#35669 = DIRECTION('',(9.95799250103E-17,-1.,0.)); +#35670 = DIRECTION('',(-4.440892098501E-15,-4.422237021476E-31,1.)); +#35671 = DEFINITIONAL_REPRESENTATION('',(#35672),#35676); +#35672 = LINE('',#35673,#35674); +#35673 = CARTESIAN_POINT('',(0.,0.)); +#35674 = VECTOR('',#35675,1.); +#35675 = DIRECTION('',(0.,-1.)); +#35676 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35677 = ADVANCED_FACE('',(#35678),#32831,.F.); +#35678 = FACE_BOUND('',#35679,.F.); +#35679 = EDGE_LOOP('',(#35680,#35708,#35709,#35732)); +#35680 = ORIENTED_EDGE('',*,*,#35681,.F.); +#35681 = EDGE_CURVE('',#32816,#35682,#35684,.T.); +#35682 = VERTEX_POINT('',#35683); +#35683 = CARTESIAN_POINT('',(-2.25,1.7,0.825)); +#35684 = SURFACE_CURVE('',#35685,(#35689,#35696),.PCURVE_S1.); +#35685 = LINE('',#35686,#35687); +#35686 = CARTESIAN_POINT('',(-1.8,1.7,0.825)); +#35687 = VECTOR('',#35688,1.); +#35688 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#35689 = PCURVE('',#32831,#35690); +#35690 = DEFINITIONAL_REPRESENTATION('',(#35691),#35695); +#35691 = LINE('',#35692,#35693); +#35692 = CARTESIAN_POINT('',(0.,0.)); +#35693 = VECTOR('',#35694,1.); +#35694 = DIRECTION('',(1.,0.)); +#35695 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35696 = PCURVE('',#35697,#35702); +#35697 = PLANE('',#35698); +#35698 = AXIS2_PLACEMENT_3D('',#35699,#35700,#35701); +#35699 = CARTESIAN_POINT('',(-2.41578967201,1.7,0.532659657565)); +#35700 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#35701 = DIRECTION('',(0.,0.,1.)); +#35702 = DEFINITIONAL_REPRESENTATION('',(#35703),#35707); +#35703 = LINE('',#35704,#35705); +#35704 = CARTESIAN_POINT('',(0.292340342435,0.61578967201)); +#35705 = VECTOR('',#35706,1.); +#35706 = DIRECTION('',(0.,-1.)); +#35707 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35708 = ORIENTED_EDGE('',*,*,#32815,.T.); +#35709 = ORIENTED_EDGE('',*,*,#35710,.T.); +#35710 = EDGE_CURVE('',#32788,#35711,#35713,.T.); +#35711 = VERTEX_POINT('',#35712); +#35712 = CARTESIAN_POINT('',(-2.25,2.11,0.825)); +#35713 = SURFACE_CURVE('',#35714,(#35718,#35725),.PCURVE_S1.); +#35714 = LINE('',#35715,#35716); +#35715 = CARTESIAN_POINT('',(-1.8,2.11,0.825)); +#35716 = VECTOR('',#35717,1.); +#35717 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#35718 = PCURVE('',#32831,#35719); +#35719 = DEFINITIONAL_REPRESENTATION('',(#35720),#35724); +#35720 = LINE('',#35721,#35722); +#35721 = CARTESIAN_POINT('',(-4.082776925422E-17,-0.41)); +#35722 = VECTOR('',#35723,1.); +#35723 = DIRECTION('',(1.,0.)); +#35724 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35725 = PCURVE('',#35538,#35726); +#35726 = DEFINITIONAL_REPRESENTATION('',(#35727),#35731); +#35727 = LINE('',#35728,#35729); +#35728 = CARTESIAN_POINT('',(0.292340342435,0.61578967201)); +#35729 = VECTOR('',#35730,1.); +#35730 = DIRECTION('',(0.,-1.)); +#35731 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35732 = ORIENTED_EDGE('',*,*,#35733,.F.); +#35733 = EDGE_CURVE('',#35682,#35711,#35734,.T.); +#35734 = SURFACE_CURVE('',#35735,(#35739,#35746),.PCURVE_S1.); +#35735 = LINE('',#35736,#35737); +#35736 = CARTESIAN_POINT('',(-2.25,1.7,0.825)); +#35737 = VECTOR('',#35738,1.); +#35738 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#35739 = PCURVE('',#32831,#35740); +#35740 = DEFINITIONAL_REPRESENTATION('',(#35741),#35745); +#35741 = LINE('',#35742,#35743); +#35742 = CARTESIAN_POINT('',(0.45,-4.481096625463E-17)); +#35743 = VECTOR('',#35744,1.); +#35744 = DIRECTION('',(0.,-1.)); +#35745 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35746 = PCURVE('',#35747,#35752); +#35747 = CYLINDRICAL_SURFACE('',#35748,0.1); +#35748 = AXIS2_PLACEMENT_3D('',#35749,#35750,#35751); +#35749 = CARTESIAN_POINT('',(-2.25,1.7,0.725)); +#35750 = DIRECTION('',(9.95799250103E-17,-1.,0.)); +#35751 = DIRECTION('',(-4.440892098501E-15,-4.422237021476E-31,1.)); +#35752 = DEFINITIONAL_REPRESENTATION('',(#35753),#35757); +#35753 = LINE('',#35754,#35755); +#35754 = CARTESIAN_POINT('',(0.,0.)); +#35755 = VECTOR('',#35756,1.); +#35756 = DIRECTION('',(0.,-1.)); +#35757 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35758 = ADVANCED_FACE('',(#35759),#32971,.F.); +#35759 = FACE_BOUND('',#35760,.F.); +#35760 = EDGE_LOOP('',(#35761,#35784,#35785,#35813)); +#35761 = ORIENTED_EDGE('',*,*,#35762,.F.); +#35762 = EDGE_CURVE('',#32956,#35763,#35765,.T.); +#35763 = VERTEX_POINT('',#35764); +#35764 = CARTESIAN_POINT('',(-1.95,-1.7,1.025)); +#35765 = SURFACE_CURVE('',#35766,(#35770,#35777),.PCURVE_S1.); +#35766 = LINE('',#35767,#35768); +#35767 = CARTESIAN_POINT('',(-1.95,-1.7,0.778829828783)); +#35768 = VECTOR('',#35769,1.); +#35769 = DIRECTION('',(0.,0.,1.)); +#35770 = PCURVE('',#32971,#35771); +#35771 = DEFINITIONAL_REPRESENTATION('',(#35772),#35776); +#35772 = LINE('',#35773,#35774); +#35773 = CARTESIAN_POINT('',(0.575,-0.246170171217)); +#35774 = VECTOR('',#35775,1.); +#35775 = DIRECTION('',(0.,1.)); +#35776 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35777 = PCURVE('',#35640,#35778); +#35778 = DEFINITIONAL_REPRESENTATION('',(#35779),#35783); +#35779 = LINE('',#35780,#35781); +#35780 = CARTESIAN_POINT('',(0.246170171218,0.46578967201)); +#35781 = VECTOR('',#35782,1.); +#35782 = DIRECTION('',(1.,0.)); +#35783 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35784 = ORIENTED_EDGE('',*,*,#32955,.T.); +#35785 = ORIENTED_EDGE('',*,*,#35786,.T.); +#35786 = EDGE_CURVE('',#32928,#35787,#35789,.T.); +#35787 = VERTEX_POINT('',#35788); +#35788 = CARTESIAN_POINT('',(-1.95,-0.84,1.025)); +#35789 = SURFACE_CURVE('',#35790,(#35794,#35801),.PCURVE_S1.); +#35790 = LINE('',#35791,#35792); +#35791 = CARTESIAN_POINT('',(-1.95,-0.84,0.778829828783)); +#35792 = VECTOR('',#35793,1.); +#35793 = DIRECTION('',(0.,0.,1.)); +#35794 = PCURVE('',#32971,#35795); +#35795 = DEFINITIONAL_REPRESENTATION('',(#35796),#35800); +#35796 = LINE('',#35797,#35798); +#35797 = CARTESIAN_POINT('',(1.435,-0.246170171217)); +#35798 = VECTOR('',#35799,1.); +#35799 = DIRECTION('',(0.,1.)); +#35800 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35801 = PCURVE('',#35802,#35807); +#35802 = PLANE('',#35803); +#35803 = AXIS2_PLACEMENT_3D('',#35804,#35805,#35806); +#35804 = CARTESIAN_POINT('',(-2.41578967201,-0.84,0.532659657565)); +#35805 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#35806 = DIRECTION('',(0.,0.,1.)); +#35807 = DEFINITIONAL_REPRESENTATION('',(#35808),#35812); +#35808 = LINE('',#35809,#35810); +#35809 = CARTESIAN_POINT('',(0.246170171218,0.46578967201)); +#35810 = VECTOR('',#35811,1.); +#35811 = DIRECTION('',(1.,0.)); +#35812 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35813 = ORIENTED_EDGE('',*,*,#35814,.F.); +#35814 = EDGE_CURVE('',#35763,#35787,#35815,.T.); +#35815 = SURFACE_CURVE('',#35816,(#35820,#35827),.PCURVE_S1.); +#35816 = LINE('',#35817,#35818); +#35817 = CARTESIAN_POINT('',(-1.95,-2.275,1.025)); +#35818 = VECTOR('',#35819,1.); +#35819 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#35820 = PCURVE('',#32971,#35821); +#35821 = DEFINITIONAL_REPRESENTATION('',(#35822),#35826); +#35822 = LINE('',#35823,#35824); +#35823 = CARTESIAN_POINT('',(0.,0.)); +#35824 = VECTOR('',#35825,1.); +#35825 = DIRECTION('',(1.,0.)); +#35826 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35827 = PCURVE('',#35828,#35833); +#35828 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#35829,#35830) + ,(#35831,#35832 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.55),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#35829 = CARTESIAN_POINT('',(-1.95,-2.275,1.025)); +#35830 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#35831 = CARTESIAN_POINT('',(-1.95,2.275,1.025)); +#35832 = CARTESIAN_POINT('',(-1.875,2.2375,1.025)); +#35833 = DEFINITIONAL_REPRESENTATION('',(#35834),#35838); +#35834 = LINE('',#35835,#35836); +#35835 = CARTESIAN_POINT('',(-1.110223024625E-16,1.787388845424E-15)); +#35836 = VECTOR('',#35837,1.); +#35837 = DIRECTION('',(1.,-3.108502339868E-15)); +#35838 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35839 = ADVANCED_FACE('',(#35840),#32859,.F.); +#35840 = FACE_BOUND('',#35841,.F.); +#35841 = EDGE_LOOP('',(#35842,#35870,#35871,#35894)); +#35842 = ORIENTED_EDGE('',*,*,#35843,.F.); +#35843 = EDGE_CURVE('',#32844,#35844,#35846,.T.); +#35844 = VERTEX_POINT('',#35845); +#35845 = CARTESIAN_POINT('',(-1.95,0.84,1.025)); +#35846 = SURFACE_CURVE('',#35847,(#35851,#35858),.PCURVE_S1.); +#35847 = LINE('',#35848,#35849); +#35848 = CARTESIAN_POINT('',(-1.95,0.84,0.778829828783)); +#35849 = VECTOR('',#35850,1.); +#35850 = DIRECTION('',(0.,0.,1.)); +#35851 = PCURVE('',#32859,#35852); +#35852 = DEFINITIONAL_REPRESENTATION('',(#35853),#35857); +#35853 = LINE('',#35854,#35855); +#35854 = CARTESIAN_POINT('',(3.115,-0.246170171217)); +#35855 = VECTOR('',#35856,1.); +#35856 = DIRECTION('',(0.,1.)); +#35857 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35858 = PCURVE('',#35859,#35864); +#35859 = PLANE('',#35860); +#35860 = AXIS2_PLACEMENT_3D('',#35861,#35862,#35863); +#35861 = CARTESIAN_POINT('',(-2.41578967201,0.84,0.532659657565)); +#35862 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#35863 = DIRECTION('',(0.,0.,1.)); +#35864 = DEFINITIONAL_REPRESENTATION('',(#35865),#35869); +#35865 = LINE('',#35866,#35867); +#35866 = CARTESIAN_POINT('',(0.246170171218,0.46578967201)); +#35867 = VECTOR('',#35868,1.); +#35868 = DIRECTION('',(1.,0.)); +#35869 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35870 = ORIENTED_EDGE('',*,*,#32843,.T.); +#35871 = ORIENTED_EDGE('',*,*,#35872,.T.); +#35872 = EDGE_CURVE('',#32816,#35873,#35875,.T.); +#35873 = VERTEX_POINT('',#35874); +#35874 = CARTESIAN_POINT('',(-1.95,1.7,1.025)); +#35875 = SURFACE_CURVE('',#35876,(#35880,#35887),.PCURVE_S1.); +#35876 = LINE('',#35877,#35878); +#35877 = CARTESIAN_POINT('',(-1.95,1.7,0.778829828783)); +#35878 = VECTOR('',#35879,1.); +#35879 = DIRECTION('',(0.,0.,1.)); +#35880 = PCURVE('',#32859,#35881); +#35881 = DEFINITIONAL_REPRESENTATION('',(#35882),#35886); +#35882 = LINE('',#35883,#35884); +#35883 = CARTESIAN_POINT('',(3.975,-0.246170171217)); +#35884 = VECTOR('',#35885,1.); +#35885 = DIRECTION('',(0.,1.)); +#35886 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35887 = PCURVE('',#35697,#35888); +#35888 = DEFINITIONAL_REPRESENTATION('',(#35889),#35893); +#35889 = LINE('',#35890,#35891); +#35890 = CARTESIAN_POINT('',(0.246170171218,0.46578967201)); +#35891 = VECTOR('',#35892,1.); +#35892 = DIRECTION('',(1.,0.)); +#35893 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35894 = ORIENTED_EDGE('',*,*,#35895,.F.); +#35895 = EDGE_CURVE('',#35844,#35873,#35896,.T.); +#35896 = SURFACE_CURVE('',#35897,(#35901,#35908),.PCURVE_S1.); +#35897 = LINE('',#35898,#35899); +#35898 = CARTESIAN_POINT('',(-1.95,-2.275,1.025)); +#35899 = VECTOR('',#35900,1.); +#35900 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#35901 = PCURVE('',#32859,#35902); +#35902 = DEFINITIONAL_REPRESENTATION('',(#35903),#35907); +#35903 = LINE('',#35904,#35905); +#35904 = CARTESIAN_POINT('',(0.,0.)); +#35905 = VECTOR('',#35906,1.); +#35906 = DIRECTION('',(1.,0.)); +#35907 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35908 = PCURVE('',#35909,#35914); +#35909 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#35910,#35911) + ,(#35912,#35913 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.55),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#35910 = CARTESIAN_POINT('',(-1.95,-2.275,1.025)); +#35911 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#35912 = CARTESIAN_POINT('',(-1.95,2.275,1.025)); +#35913 = CARTESIAN_POINT('',(-1.875,2.2375,1.025)); +#35914 = DEFINITIONAL_REPRESENTATION('',(#35915),#35919); +#35915 = LINE('',#35916,#35917); +#35916 = CARTESIAN_POINT('',(4.440892098501E-16,-1.533621517397E-15)); +#35917 = VECTOR('',#35918,1.); +#35918 = DIRECTION('',(1.,-2.266549495801E-15)); +#35919 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35920 = ADVANCED_FACE('',(#35921),#32943,.F.); +#35921 = FACE_BOUND('',#35922,.F.); +#35922 = EDGE_LOOP('',(#35923,#35946,#35947,#35975)); +#35923 = ORIENTED_EDGE('',*,*,#35924,.F.); +#35924 = EDGE_CURVE('',#32928,#35925,#35927,.T.); +#35925 = VERTEX_POINT('',#35926); +#35926 = CARTESIAN_POINT('',(-2.25,-0.84,0.825)); +#35927 = SURFACE_CURVE('',#35928,(#35932,#35939),.PCURVE_S1.); +#35928 = LINE('',#35929,#35930); +#35929 = CARTESIAN_POINT('',(-1.8,-0.84,0.825)); +#35930 = VECTOR('',#35931,1.); +#35931 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#35932 = PCURVE('',#32943,#35933); +#35933 = DEFINITIONAL_REPRESENTATION('',(#35934),#35938); +#35934 = LINE('',#35935,#35936); +#35935 = CARTESIAN_POINT('',(0.,0.)); +#35936 = VECTOR('',#35937,1.); +#35937 = DIRECTION('',(1.,0.)); +#35938 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35939 = PCURVE('',#35802,#35940); +#35940 = DEFINITIONAL_REPRESENTATION('',(#35941),#35945); +#35941 = LINE('',#35942,#35943); +#35942 = CARTESIAN_POINT('',(0.292340342435,0.61578967201)); +#35943 = VECTOR('',#35944,1.); +#35944 = DIRECTION('',(0.,-1.)); +#35945 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35946 = ORIENTED_EDGE('',*,*,#32927,.T.); +#35947 = ORIENTED_EDGE('',*,*,#35948,.T.); +#35948 = EDGE_CURVE('',#32900,#35949,#35951,.T.); +#35949 = VERTEX_POINT('',#35950); +#35950 = CARTESIAN_POINT('',(-2.25,-0.43,0.825)); +#35951 = SURFACE_CURVE('',#35952,(#35956,#35963),.PCURVE_S1.); +#35952 = LINE('',#35953,#35954); +#35953 = CARTESIAN_POINT('',(-1.8,-0.43,0.825)); +#35954 = VECTOR('',#35955,1.); +#35955 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#35956 = PCURVE('',#32943,#35957); +#35957 = DEFINITIONAL_REPRESENTATION('',(#35958),#35962); +#35958 = LINE('',#35959,#35960); +#35959 = CARTESIAN_POINT('',(-4.082776925422E-17,-0.41)); +#35960 = VECTOR('',#35961,1.); +#35961 = DIRECTION('',(1.,0.)); +#35962 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35963 = PCURVE('',#35964,#35969); +#35964 = PLANE('',#35965); +#35965 = AXIS2_PLACEMENT_3D('',#35966,#35967,#35968); +#35966 = CARTESIAN_POINT('',(-2.41578967201,-0.43,0.532659657565)); +#35967 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#35968 = DIRECTION('',(0.,0.,1.)); +#35969 = DEFINITIONAL_REPRESENTATION('',(#35970),#35974); +#35970 = LINE('',#35971,#35972); +#35971 = CARTESIAN_POINT('',(0.292340342435,0.61578967201)); +#35972 = VECTOR('',#35973,1.); +#35973 = DIRECTION('',(0.,-1.)); +#35974 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35975 = ORIENTED_EDGE('',*,*,#35976,.F.); +#35976 = EDGE_CURVE('',#35925,#35949,#35977,.T.); +#35977 = SURFACE_CURVE('',#35978,(#35982,#35989),.PCURVE_S1.); +#35978 = LINE('',#35979,#35980); +#35979 = CARTESIAN_POINT('',(-2.25,-0.84,0.825)); +#35980 = VECTOR('',#35981,1.); +#35981 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#35982 = PCURVE('',#32943,#35983); +#35983 = DEFINITIONAL_REPRESENTATION('',(#35984),#35988); +#35984 = LINE('',#35985,#35986); +#35985 = CARTESIAN_POINT('',(0.45,-4.481096625463E-17)); +#35986 = VECTOR('',#35987,1.); +#35987 = DIRECTION('',(0.,-1.)); +#35988 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#35989 = PCURVE('',#35990,#35995); +#35990 = CYLINDRICAL_SURFACE('',#35991,0.1); +#35991 = AXIS2_PLACEMENT_3D('',#35992,#35993,#35994); +#35992 = CARTESIAN_POINT('',(-2.25,-0.84,0.725)); +#35993 = DIRECTION('',(9.95799250103E-17,-1.,0.)); +#35994 = DIRECTION('',(-4.440892098501E-15,-4.422237021476E-31,1.)); +#35995 = DEFINITIONAL_REPRESENTATION('',(#35996),#36000); +#35996 = LINE('',#35997,#35998); +#35997 = CARTESIAN_POINT('',(0.,0.)); +#35998 = VECTOR('',#35999,1.); +#35999 = DIRECTION('',(0.,-1.)); +#36000 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36001 = ADVANCED_FACE('',(#36002),#32887,.F.); +#36002 = FACE_BOUND('',#36003,.F.); +#36003 = EDGE_LOOP('',(#36004,#36032,#36033,#36056)); +#36004 = ORIENTED_EDGE('',*,*,#36005,.F.); +#36005 = EDGE_CURVE('',#32872,#36006,#36008,.T.); +#36006 = VERTEX_POINT('',#36007); +#36007 = CARTESIAN_POINT('',(-2.25,0.43,0.825)); +#36008 = SURFACE_CURVE('',#36009,(#36013,#36020),.PCURVE_S1.); +#36009 = LINE('',#36010,#36011); +#36010 = CARTESIAN_POINT('',(-1.8,0.43,0.825)); +#36011 = VECTOR('',#36012,1.); +#36012 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#36013 = PCURVE('',#32887,#36014); +#36014 = DEFINITIONAL_REPRESENTATION('',(#36015),#36019); +#36015 = LINE('',#36016,#36017); +#36016 = CARTESIAN_POINT('',(0.,0.)); +#36017 = VECTOR('',#36018,1.); +#36018 = DIRECTION('',(1.,0.)); +#36019 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36020 = PCURVE('',#36021,#36026); +#36021 = PLANE('',#36022); +#36022 = AXIS2_PLACEMENT_3D('',#36023,#36024,#36025); +#36023 = CARTESIAN_POINT('',(-2.41578967201,0.43,0.532659657565)); +#36024 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#36025 = DIRECTION('',(0.,0.,1.)); +#36026 = DEFINITIONAL_REPRESENTATION('',(#36027),#36031); +#36027 = LINE('',#36028,#36029); +#36028 = CARTESIAN_POINT('',(0.292340342435,0.61578967201)); +#36029 = VECTOR('',#36030,1.); +#36030 = DIRECTION('',(0.,-1.)); +#36031 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36032 = ORIENTED_EDGE('',*,*,#32871,.T.); +#36033 = ORIENTED_EDGE('',*,*,#36034,.T.); +#36034 = EDGE_CURVE('',#32844,#36035,#36037,.T.); +#36035 = VERTEX_POINT('',#36036); +#36036 = CARTESIAN_POINT('',(-2.25,0.84,0.825)); +#36037 = SURFACE_CURVE('',#36038,(#36042,#36049),.PCURVE_S1.); +#36038 = LINE('',#36039,#36040); +#36039 = CARTESIAN_POINT('',(-1.8,0.84,0.825)); +#36040 = VECTOR('',#36041,1.); +#36041 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#36042 = PCURVE('',#32887,#36043); +#36043 = DEFINITIONAL_REPRESENTATION('',(#36044),#36048); +#36044 = LINE('',#36045,#36046); +#36045 = CARTESIAN_POINT('',(-4.082776925422E-17,-0.41)); +#36046 = VECTOR('',#36047,1.); +#36047 = DIRECTION('',(1.,0.)); +#36048 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36049 = PCURVE('',#35859,#36050); +#36050 = DEFINITIONAL_REPRESENTATION('',(#36051),#36055); +#36051 = LINE('',#36052,#36053); +#36052 = CARTESIAN_POINT('',(0.292340342435,0.61578967201)); +#36053 = VECTOR('',#36054,1.); +#36054 = DIRECTION('',(0.,-1.)); +#36055 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36056 = ORIENTED_EDGE('',*,*,#36057,.F.); +#36057 = EDGE_CURVE('',#36006,#36035,#36058,.T.); +#36058 = SURFACE_CURVE('',#36059,(#36063,#36070),.PCURVE_S1.); +#36059 = LINE('',#36060,#36061); +#36060 = CARTESIAN_POINT('',(-2.25,0.43,0.825)); +#36061 = VECTOR('',#36062,1.); +#36062 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#36063 = PCURVE('',#32887,#36064); +#36064 = DEFINITIONAL_REPRESENTATION('',(#36065),#36069); +#36065 = LINE('',#36066,#36067); +#36066 = CARTESIAN_POINT('',(0.45,-4.481096625463E-17)); +#36067 = VECTOR('',#36068,1.); +#36068 = DIRECTION('',(0.,-1.)); +#36069 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36070 = PCURVE('',#36071,#36076); +#36071 = CYLINDRICAL_SURFACE('',#36072,0.1); +#36072 = AXIS2_PLACEMENT_3D('',#36073,#36074,#36075); +#36073 = CARTESIAN_POINT('',(-2.25,0.43,0.725)); +#36074 = DIRECTION('',(9.95799250103E-17,-1.,0.)); +#36075 = DIRECTION('',(-4.440892098501E-15,-4.422237021476E-31,1.)); +#36076 = DEFINITIONAL_REPRESENTATION('',(#36077),#36081); +#36077 = LINE('',#36078,#36079); +#36078 = CARTESIAN_POINT('',(0.,0.)); +#36079 = VECTOR('',#36080,1.); +#36080 = DIRECTION('',(0.,-1.)); +#36081 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36082 = ADVANCED_FACE('',(#36083),#32915,.F.); +#36083 = FACE_BOUND('',#36084,.F.); +#36084 = EDGE_LOOP('',(#36085,#36108,#36109,#36132)); +#36085 = ORIENTED_EDGE('',*,*,#36086,.F.); +#36086 = EDGE_CURVE('',#32900,#36087,#36089,.T.); +#36087 = VERTEX_POINT('',#36088); +#36088 = CARTESIAN_POINT('',(-1.95,-0.43,1.025)); +#36089 = SURFACE_CURVE('',#36090,(#36094,#36101),.PCURVE_S1.); +#36090 = LINE('',#36091,#36092); +#36091 = CARTESIAN_POINT('',(-1.95,-0.43,0.778829828783)); +#36092 = VECTOR('',#36093,1.); +#36093 = DIRECTION('',(0.,0.,1.)); +#36094 = PCURVE('',#32915,#36095); +#36095 = DEFINITIONAL_REPRESENTATION('',(#36096),#36100); +#36096 = LINE('',#36097,#36098); +#36097 = CARTESIAN_POINT('',(1.845,-0.246170171217)); +#36098 = VECTOR('',#36099,1.); +#36099 = DIRECTION('',(0.,1.)); +#36100 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36101 = PCURVE('',#35964,#36102); +#36102 = DEFINITIONAL_REPRESENTATION('',(#36103),#36107); +#36103 = LINE('',#36104,#36105); +#36104 = CARTESIAN_POINT('',(0.246170171218,0.46578967201)); +#36105 = VECTOR('',#36106,1.); +#36106 = DIRECTION('',(1.,0.)); +#36107 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36108 = ORIENTED_EDGE('',*,*,#32899,.T.); +#36109 = ORIENTED_EDGE('',*,*,#36110,.T.); +#36110 = EDGE_CURVE('',#32872,#36111,#36113,.T.); +#36111 = VERTEX_POINT('',#36112); +#36112 = CARTESIAN_POINT('',(-1.95,0.43,1.025)); +#36113 = SURFACE_CURVE('',#36114,(#36118,#36125),.PCURVE_S1.); +#36114 = LINE('',#36115,#36116); +#36115 = CARTESIAN_POINT('',(-1.95,0.43,0.778829828783)); +#36116 = VECTOR('',#36117,1.); +#36117 = DIRECTION('',(0.,0.,1.)); +#36118 = PCURVE('',#32915,#36119); +#36119 = DEFINITIONAL_REPRESENTATION('',(#36120),#36124); +#36120 = LINE('',#36121,#36122); +#36121 = CARTESIAN_POINT('',(2.705,-0.246170171217)); +#36122 = VECTOR('',#36123,1.); +#36123 = DIRECTION('',(0.,1.)); +#36124 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36125 = PCURVE('',#36021,#36126); +#36126 = DEFINITIONAL_REPRESENTATION('',(#36127),#36131); +#36127 = LINE('',#36128,#36129); +#36128 = CARTESIAN_POINT('',(0.246170171218,0.46578967201)); +#36129 = VECTOR('',#36130,1.); +#36130 = DIRECTION('',(1.,0.)); +#36131 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36132 = ORIENTED_EDGE('',*,*,#36133,.F.); +#36133 = EDGE_CURVE('',#36087,#36111,#36134,.T.); +#36134 = SURFACE_CURVE('',#36135,(#36139,#36146),.PCURVE_S1.); +#36135 = LINE('',#36136,#36137); +#36136 = CARTESIAN_POINT('',(-1.95,-2.275,1.025)); +#36137 = VECTOR('',#36138,1.); +#36138 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#36139 = PCURVE('',#32915,#36140); +#36140 = DEFINITIONAL_REPRESENTATION('',(#36141),#36145); +#36141 = LINE('',#36142,#36143); +#36142 = CARTESIAN_POINT('',(0.,0.)); +#36143 = VECTOR('',#36144,1.); +#36144 = DIRECTION('',(1.,0.)); +#36145 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36146 = PCURVE('',#36147,#36152); +#36147 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#36148,#36149) + ,(#36150,#36151 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,4.55),(0.,1.), + .PIECEWISE_BEZIER_KNOTS.); +#36148 = CARTESIAN_POINT('',(-1.95,-2.275,1.025)); +#36149 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#36150 = CARTESIAN_POINT('',(-1.95,2.275,1.025)); +#36151 = CARTESIAN_POINT('',(-1.875,2.2375,1.025)); +#36152 = DEFINITIONAL_REPRESENTATION('',(#36153),#36157); +#36153 = LINE('',#36154,#36155); +#36154 = CARTESIAN_POINT('',(4.440892098501E-16,4.650842583769E-16)); +#36155 = VECTOR('',#36156,1.); +#36156 = DIRECTION('',(1.,-3.444569116312E-15)); +#36157 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36158 = ADVANCED_FACE('',(#36159),#33057,.F.); +#36159 = FACE_BOUND('',#36160,.F.); +#36160 = EDGE_LOOP('',(#36161,#36162,#36163,#36189)); +#36161 = ORIENTED_EDGE('',*,*,#33043,.T.); +#36162 = ORIENTED_EDGE('',*,*,#34768,.T.); +#36163 = ORIENTED_EDGE('',*,*,#36164,.F.); +#36164 = EDGE_CURVE('',#35552,#34746,#36165,.T.); +#36165 = SURFACE_CURVE('',#36166,(#36170,#36177),.PCURVE_S1.); +#36166 = LINE('',#36167,#36168); +#36167 = CARTESIAN_POINT('',(-1.95,2.275,1.025)); +#36168 = VECTOR('',#36169,1.); +#36169 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#36170 = PCURVE('',#33057,#36171); +#36171 = DEFINITIONAL_REPRESENTATION('',(#36172),#36176); +#36172 = LINE('',#36173,#36174); +#36173 = CARTESIAN_POINT('',(0.,0.)); +#36174 = VECTOR('',#36175,1.); +#36175 = DIRECTION('',(1.,0.)); +#36176 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36177 = PCURVE('',#36178,#36183); +#36178 = B_SPLINE_SURFACE_WITH_KNOTS('',1,1,( + (#36179,#36180) + ,(#36181,#36182 + )),.UNSPECIFIED.,.F.,.F.,.F.,(2,2),(2,2),(0.,0.247487373415),(0.,1.) + ,.PIECEWISE_BEZIER_KNOTS.); +#36179 = CARTESIAN_POINT('',(-1.95,2.275,1.025)); +#36180 = CARTESIAN_POINT('',(-1.875,2.2375,1.025)); +#36181 = CARTESIAN_POINT('',(-1.775,2.45,1.025)); +#36182 = CARTESIAN_POINT('',(-1.7375,2.375,1.025)); +#36183 = DEFINITIONAL_REPRESENTATION('',(#36184),#36188); +#36184 = LINE('',#36185,#36186); +#36185 = CARTESIAN_POINT('',(2.508731586994E-16,-4.08400163074E-15)); +#36186 = VECTOR('',#36187,1.); +#36187 = DIRECTION('',(1.,7.990563855149E-15)); +#36188 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36189 = ORIENTED_EDGE('',*,*,#35551,.F.); +#36190 = ADVANCED_FACE('',(#36191),#33108,.F.); +#36191 = FACE_BOUND('',#36192,.F.); +#36192 = EDGE_LOOP('',(#36193,#36194,#36214,#36215)); +#36193 = ORIENTED_EDGE('',*,*,#33094,.T.); +#36194 = ORIENTED_EDGE('',*,*,#36195,.T.); +#36195 = EDGE_CURVE('',#33075,#35032,#36196,.T.); +#36196 = SURFACE_CURVE('',#36197,(#36200,#36207),.PCURVE_S1.); +#36197 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36198,#36199),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#36198 = CARTESIAN_POINT('',(1.775,-2.45,1.025)); +#36199 = CARTESIAN_POINT('',(1.7375,-2.375,1.025)); +#36200 = PCURVE('',#33108,#36201); +#36201 = DEFINITIONAL_REPRESENTATION('',(#36202),#36206); +#36202 = LINE('',#36203,#36204); +#36203 = CARTESIAN_POINT('',(0.247487373415,-4.08016779168E-15)); +#36204 = VECTOR('',#36205,1.); +#36205 = DIRECTION('',(2.775557561563E-17,1.)); +#36206 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36207 = PCURVE('',#35396,#36208); +#36208 = DEFINITIONAL_REPRESENTATION('',(#36209),#36213); +#36209 = LINE('',#36210,#36211); +#36210 = CARTESIAN_POINT('',(3.586217722922E-17,1.041987532702E-15)); +#36211 = VECTOR('',#36212,1.); +#36212 = DIRECTION('',(-1.363609671586E-16,1.)); +#36213 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36214 = ORIENTED_EDGE('',*,*,#35031,.F.); +#36215 = ORIENTED_EDGE('',*,*,#33453,.F.); +#36216 = ADVANCED_FACE('',(#36217),#33373,.T.); +#36217 = FACE_BOUND('',#36218,.T.); +#36218 = EDGE_LOOP('',(#36219,#36220,#36221,#36222)); +#36219 = ORIENTED_EDGE('',*,*,#33674,.T.); +#36220 = ORIENTED_EDGE('',*,*,#35108,.T.); +#36221 = ORIENTED_EDGE('',*,*,#33356,.F.); +#36222 = ORIENTED_EDGE('',*,*,#36223,.F.); +#36223 = EDGE_CURVE('',#33652,#33329,#36224,.T.); +#36224 = SURFACE_CURVE('',#36225,(#36229,#36236),.PCURVE_S1.); +#36225 = LINE('',#36226,#36227); +#36226 = CARTESIAN_POINT('',(2.55,-1.7,0.725)); +#36227 = VECTOR('',#36228,1.); +#36228 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#36229 = PCURVE('',#33373,#36230); +#36230 = DEFINITIONAL_REPRESENTATION('',(#36231),#36235); +#36231 = LINE('',#36232,#36233); +#36232 = CARTESIAN_POINT('',(6.28318530718,-2.22044604925E-16)); +#36233 = VECTOR('',#36234,1.); +#36234 = DIRECTION('',(0.,-1.)); +#36235 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36236 = PCURVE('',#33344,#36237); +#36237 = DEFINITIONAL_REPRESENTATION('',(#36238),#36242); +#36238 = LINE('',#36239,#36240); +#36239 = CARTESIAN_POINT('',(0.425,0.)); +#36240 = VECTOR('',#36241,1.); +#36241 = DIRECTION('',(0.,-1.)); +#36242 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36243 = ADVANCED_FACE('',(#36244),#33344,.F.); +#36244 = FACE_BOUND('',#36245,.F.); +#36245 = EDGE_LOOP('',(#36246,#36267,#36268,#36269)); +#36246 = ORIENTED_EDGE('',*,*,#36247,.T.); +#36247 = EDGE_CURVE('',#33624,#33296,#36248,.T.); +#36248 = SURFACE_CURVE('',#36249,(#36253,#36260),.PCURVE_S1.); +#36249 = LINE('',#36250,#36251); +#36250 = CARTESIAN_POINT('',(2.55,-1.7,0.3)); +#36251 = VECTOR('',#36252,1.); +#36252 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#36253 = PCURVE('',#33344,#36254); +#36254 = DEFINITIONAL_REPRESENTATION('',(#36255),#36259); +#36255 = LINE('',#36256,#36257); +#36256 = CARTESIAN_POINT('',(0.,0.)); +#36257 = VECTOR('',#36258,1.); +#36258 = DIRECTION('',(0.,-1.)); +#36259 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36260 = PCURVE('',#33316,#36261); +#36261 = DEFINITIONAL_REPRESENTATION('',(#36262),#36266); +#36262 = LINE('',#36263,#36264); +#36263 = CARTESIAN_POINT('',(1.570796326795,0.)); +#36264 = VECTOR('',#36265,1.); +#36265 = DIRECTION('',(0.,-1.)); +#36266 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36267 = ORIENTED_EDGE('',*,*,#33328,.T.); +#36268 = ORIENTED_EDGE('',*,*,#36223,.F.); +#36269 = ORIENTED_EDGE('',*,*,#33651,.F.); +#36270 = ADVANCED_FACE('',(#36271),#33316,.F.); +#36271 = FACE_BOUND('',#36272,.F.); +#36272 = EDGE_LOOP('',(#36273,#36294,#36295,#36296)); +#36273 = ORIENTED_EDGE('',*,*,#36274,.T.); +#36274 = EDGE_CURVE('',#33601,#33268,#36275,.T.); +#36275 = SURFACE_CURVE('',#36276,(#36280,#36287),.PCURVE_S1.); +#36276 = LINE('',#36277,#36278); +#36277 = CARTESIAN_POINT('',(2.65,-1.7,0.2)); +#36278 = VECTOR('',#36279,1.); +#36279 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#36280 = PCURVE('',#33316,#36281); +#36281 = DEFINITIONAL_REPRESENTATION('',(#36282),#36286); +#36282 = LINE('',#36283,#36284); +#36283 = CARTESIAN_POINT('',(0.,0.)); +#36284 = VECTOR('',#36285,1.); +#36285 = DIRECTION('',(0.,-1.)); +#36286 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36287 = PCURVE('',#33283,#36288); +#36288 = DEFINITIONAL_REPRESENTATION('',(#36289),#36293); +#36289 = LINE('',#36290,#36291); +#36290 = CARTESIAN_POINT('',(0.35,7.771561172375E-17)); +#36291 = VECTOR('',#36292,1.); +#36292 = DIRECTION('',(0.,-1.)); +#36293 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36294 = ORIENTED_EDGE('',*,*,#33295,.T.); +#36295 = ORIENTED_EDGE('',*,*,#36247,.F.); +#36296 = ORIENTED_EDGE('',*,*,#33623,.F.); +#36297 = ADVANCED_FACE('',(#36298),#33283,.F.); +#36298 = FACE_BOUND('',#36299,.F.); +#36299 = EDGE_LOOP('',(#36300,#36321,#36322,#36323)); +#36300 = ORIENTED_EDGE('',*,*,#36301,.T.); +#36301 = EDGE_CURVE('',#33578,#33240,#36302,.T.); +#36302 = SURFACE_CURVE('',#36303,(#36307,#36314),.PCURVE_S1.); +#36303 = LINE('',#36304,#36305); +#36304 = CARTESIAN_POINT('',(3.,-1.7,0.2)); +#36305 = VECTOR('',#36306,1.); +#36306 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#36307 = PCURVE('',#33283,#36308); +#36308 = DEFINITIONAL_REPRESENTATION('',(#36309),#36313); +#36309 = LINE('',#36310,#36311); +#36310 = CARTESIAN_POINT('',(-0.,0.)); +#36311 = VECTOR('',#36312,1.); +#36312 = DIRECTION('',(0.,-1.)); +#36313 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36314 = PCURVE('',#33255,#36315); +#36315 = DEFINITIONAL_REPRESENTATION('',(#36316),#36320); +#36316 = LINE('',#36317,#36318); +#36317 = CARTESIAN_POINT('',(0.2,0.)); +#36318 = VECTOR('',#36319,1.); +#36319 = DIRECTION('',(0.,-1.)); +#36320 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36321 = ORIENTED_EDGE('',*,*,#33267,.T.); +#36322 = ORIENTED_EDGE('',*,*,#36274,.F.); +#36323 = ORIENTED_EDGE('',*,*,#33600,.F.); +#36324 = ADVANCED_FACE('',(#36325),#33255,.F.); +#36325 = FACE_BOUND('',#36326,.F.); +#36326 = EDGE_LOOP('',(#36327,#36348,#36349,#36350)); +#36327 = ORIENTED_EDGE('',*,*,#36328,.T.); +#36328 = EDGE_CURVE('',#33555,#33212,#36329,.T.); +#36329 = SURFACE_CURVE('',#36330,(#36334,#36341),.PCURVE_S1.); +#36330 = LINE('',#36331,#36332); +#36331 = CARTESIAN_POINT('',(3.,-1.7,5.551115123126E-17)); +#36332 = VECTOR('',#36333,1.); +#36333 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#36334 = PCURVE('',#33255,#36335); +#36335 = DEFINITIONAL_REPRESENTATION('',(#36336),#36340); +#36336 = LINE('',#36337,#36338); +#36337 = CARTESIAN_POINT('',(0.,0.)); +#36338 = VECTOR('',#36339,1.); +#36339 = DIRECTION('',(0.,-1.)); +#36340 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36341 = PCURVE('',#33227,#36342); +#36342 = DEFINITIONAL_REPRESENTATION('',(#36343),#36347); +#36343 = LINE('',#36344,#36345); +#36344 = CARTESIAN_POINT('',(0.35,-7.771561172375E-17)); +#36345 = VECTOR('',#36346,1.); +#36346 = DIRECTION('',(0.,-1.)); +#36347 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36348 = ORIENTED_EDGE('',*,*,#33239,.T.); +#36349 = ORIENTED_EDGE('',*,*,#36301,.F.); +#36350 = ORIENTED_EDGE('',*,*,#33577,.F.); +#36351 = ADVANCED_FACE('',(#36352),#33227,.F.); +#36352 = FACE_BOUND('',#36353,.F.); +#36353 = EDGE_LOOP('',(#36354,#36375,#36376,#36377)); +#36354 = ORIENTED_EDGE('',*,*,#36355,.T.); +#36355 = EDGE_CURVE('',#33531,#33183,#36356,.T.); +#36356 = SURFACE_CURVE('',#36357,(#36361,#36368),.PCURVE_S1.); +#36357 = LINE('',#36358,#36359); +#36358 = CARTESIAN_POINT('',(2.65,-1.7,5.551115123126E-17)); +#36359 = VECTOR('',#36360,1.); +#36360 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#36361 = PCURVE('',#33227,#36362); +#36362 = DEFINITIONAL_REPRESENTATION('',(#36363),#36367); +#36363 = LINE('',#36364,#36365); +#36364 = CARTESIAN_POINT('',(0.,0.)); +#36365 = VECTOR('',#36366,1.); +#36366 = DIRECTION('',(0.,-1.)); +#36367 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36368 = PCURVE('',#33199,#36369); +#36369 = DEFINITIONAL_REPRESENTATION('',(#36370),#36374); +#36370 = LINE('',#36371,#36372); +#36371 = CARTESIAN_POINT('',(4.712388980385,0.)); +#36372 = VECTOR('',#36373,1.); +#36373 = DIRECTION('',(0.,-1.)); +#36374 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36375 = ORIENTED_EDGE('',*,*,#33211,.T.); +#36376 = ORIENTED_EDGE('',*,*,#36328,.F.); +#36377 = ORIENTED_EDGE('',*,*,#33554,.F.); +#36378 = ADVANCED_FACE('',(#36379),#33199,.T.); +#36379 = FACE_BOUND('',#36380,.T.); +#36380 = EDGE_LOOP('',(#36381,#36382,#36383,#36384)); +#36381 = ORIENTED_EDGE('',*,*,#33530,.T.); +#36382 = ORIENTED_EDGE('',*,*,#36355,.T.); +#36383 = ORIENTED_EDGE('',*,*,#33182,.F.); +#36384 = ORIENTED_EDGE('',*,*,#36385,.F.); +#36385 = EDGE_CURVE('',#33508,#33155,#36386,.T.); +#36386 = SURFACE_CURVE('',#36387,(#36391,#36398),.PCURVE_S1.); +#36387 = LINE('',#36388,#36389); +#36388 = CARTESIAN_POINT('',(2.35,-1.7,0.3)); +#36389 = VECTOR('',#36390,1.); +#36390 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#36391 = PCURVE('',#33199,#36392); +#36392 = DEFINITIONAL_REPRESENTATION('',(#36393),#36397); +#36393 = LINE('',#36394,#36395); +#36394 = CARTESIAN_POINT('',(6.28318530718,2.22044604925E-16)); +#36395 = VECTOR('',#36396,1.); +#36396 = DIRECTION('',(0.,-1.)); +#36397 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36398 = PCURVE('',#33170,#36399); +#36399 = DEFINITIONAL_REPRESENTATION('',(#36400),#36404); +#36400 = LINE('',#36401,#36402); +#36401 = CARTESIAN_POINT('',(0.425,-9.860761315258E-32)); +#36402 = VECTOR('',#36403,1.); +#36403 = DIRECTION('',(7.584527938158E-44,-1.)); +#36404 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36405 = ADVANCED_FACE('',(#36406),#33170,.F.); +#36406 = FACE_BOUND('',#36407,.F.); +#36407 = EDGE_LOOP('',(#36408,#36409,#36410,#36411)); +#36408 = ORIENTED_EDGE('',*,*,#33724,.T.); +#36409 = ORIENTED_EDGE('',*,*,#33154,.T.); +#36410 = ORIENTED_EDGE('',*,*,#36385,.F.); +#36411 = ORIENTED_EDGE('',*,*,#33507,.F.); +#36412 = ADVANCED_FACE('',(#36413),#33998,.T.); +#36413 = FACE_BOUND('',#36414,.T.); +#36414 = EDGE_LOOP('',(#36415,#36416,#36417,#36418)); +#36415 = ORIENTED_EDGE('',*,*,#34571,.T.); +#36416 = ORIENTED_EDGE('',*,*,#35137,.T.); +#36417 = ORIENTED_EDGE('',*,*,#33981,.F.); +#36418 = ORIENTED_EDGE('',*,*,#36419,.F.); +#36419 = EDGE_CURVE('',#34549,#33954,#36420,.T.); +#36420 = SURFACE_CURVE('',#36421,(#36425,#36432),.PCURVE_S1.); +#36421 = LINE('',#36422,#36423); +#36422 = CARTESIAN_POINT('',(2.55,-0.43,0.725)); +#36423 = VECTOR('',#36424,1.); +#36424 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#36425 = PCURVE('',#33998,#36426); +#36426 = DEFINITIONAL_REPRESENTATION('',(#36427),#36431); +#36427 = LINE('',#36428,#36429); +#36428 = CARTESIAN_POINT('',(6.28318530718,-5.551115123126E-17)); +#36429 = VECTOR('',#36430,1.); +#36430 = DIRECTION('',(0.,-1.)); +#36431 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36432 = PCURVE('',#33969,#36433); +#36433 = DEFINITIONAL_REPRESENTATION('',(#36434),#36438); +#36434 = LINE('',#36435,#36436); +#36435 = CARTESIAN_POINT('',(0.425,0.)); +#36436 = VECTOR('',#36437,1.); +#36437 = DIRECTION('',(0.,-1.)); +#36438 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36439 = ADVANCED_FACE('',(#36440),#33969,.F.); +#36440 = FACE_BOUND('',#36441,.F.); +#36441 = EDGE_LOOP('',(#36442,#36463,#36464,#36465)); +#36442 = ORIENTED_EDGE('',*,*,#36443,.T.); +#36443 = EDGE_CURVE('',#34521,#33921,#36444,.T.); +#36444 = SURFACE_CURVE('',#36445,(#36449,#36456),.PCURVE_S1.); +#36445 = LINE('',#36446,#36447); +#36446 = CARTESIAN_POINT('',(2.55,-0.43,0.3)); +#36447 = VECTOR('',#36448,1.); +#36448 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#36449 = PCURVE('',#33969,#36450); +#36450 = DEFINITIONAL_REPRESENTATION('',(#36451),#36455); +#36451 = LINE('',#36452,#36453); +#36452 = CARTESIAN_POINT('',(0.,0.)); +#36453 = VECTOR('',#36454,1.); +#36454 = DIRECTION('',(0.,-1.)); +#36455 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36456 = PCURVE('',#33941,#36457); +#36457 = DEFINITIONAL_REPRESENTATION('',(#36458),#36462); +#36458 = LINE('',#36459,#36460); +#36459 = CARTESIAN_POINT('',(1.570796326795,5.551115123126E-17)); +#36460 = VECTOR('',#36461,1.); +#36461 = DIRECTION('',(0.,-1.)); +#36462 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36463 = ORIENTED_EDGE('',*,*,#33953,.T.); +#36464 = ORIENTED_EDGE('',*,*,#36419,.F.); +#36465 = ORIENTED_EDGE('',*,*,#34548,.F.); +#36466 = ADVANCED_FACE('',(#36467),#33941,.F.); +#36467 = FACE_BOUND('',#36468,.F.); +#36468 = EDGE_LOOP('',(#36469,#36490,#36491,#36492)); +#36469 = ORIENTED_EDGE('',*,*,#36470,.T.); +#36470 = EDGE_CURVE('',#34498,#33893,#36471,.T.); +#36471 = SURFACE_CURVE('',#36472,(#36476,#36483),.PCURVE_S1.); +#36472 = LINE('',#36473,#36474); +#36473 = CARTESIAN_POINT('',(2.65,-0.43,0.2)); +#36474 = VECTOR('',#36475,1.); +#36475 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#36476 = PCURVE('',#33941,#36477); +#36477 = DEFINITIONAL_REPRESENTATION('',(#36478),#36482); +#36478 = LINE('',#36479,#36480); +#36479 = CARTESIAN_POINT('',(0.,0.)); +#36480 = VECTOR('',#36481,1.); +#36481 = DIRECTION('',(0.,-1.)); +#36482 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36483 = PCURVE('',#33908,#36484); +#36484 = DEFINITIONAL_REPRESENTATION('',(#36485),#36489); +#36485 = LINE('',#36486,#36487); +#36486 = CARTESIAN_POINT('',(0.35,7.771561172375E-17)); +#36487 = VECTOR('',#36488,1.); +#36488 = DIRECTION('',(0.,-1.)); +#36489 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36490 = ORIENTED_EDGE('',*,*,#33920,.T.); +#36491 = ORIENTED_EDGE('',*,*,#36443,.F.); +#36492 = ORIENTED_EDGE('',*,*,#34520,.F.); +#36493 = ADVANCED_FACE('',(#36494),#33908,.F.); +#36494 = FACE_BOUND('',#36495,.F.); +#36495 = EDGE_LOOP('',(#36496,#36517,#36518,#36519)); +#36496 = ORIENTED_EDGE('',*,*,#36497,.T.); +#36497 = EDGE_CURVE('',#34475,#33865,#36498,.T.); +#36498 = SURFACE_CURVE('',#36499,(#36503,#36510),.PCURVE_S1.); +#36499 = LINE('',#36500,#36501); +#36500 = CARTESIAN_POINT('',(3.,-0.43,0.2)); +#36501 = VECTOR('',#36502,1.); +#36502 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#36503 = PCURVE('',#33908,#36504); +#36504 = DEFINITIONAL_REPRESENTATION('',(#36505),#36509); +#36505 = LINE('',#36506,#36507); +#36506 = CARTESIAN_POINT('',(-0.,0.)); +#36507 = VECTOR('',#36508,1.); +#36508 = DIRECTION('',(0.,-1.)); +#36509 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36510 = PCURVE('',#33880,#36511); +#36511 = DEFINITIONAL_REPRESENTATION('',(#36512),#36516); +#36512 = LINE('',#36513,#36514); +#36513 = CARTESIAN_POINT('',(0.2,0.)); +#36514 = VECTOR('',#36515,1.); +#36515 = DIRECTION('',(0.,-1.)); +#36516 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36517 = ORIENTED_EDGE('',*,*,#33892,.T.); +#36518 = ORIENTED_EDGE('',*,*,#36470,.F.); +#36519 = ORIENTED_EDGE('',*,*,#34497,.F.); +#36520 = ADVANCED_FACE('',(#36521),#33880,.F.); +#36521 = FACE_BOUND('',#36522,.F.); +#36522 = EDGE_LOOP('',(#36523,#36544,#36545,#36546)); +#36523 = ORIENTED_EDGE('',*,*,#36524,.T.); +#36524 = EDGE_CURVE('',#34452,#33837,#36525,.T.); +#36525 = SURFACE_CURVE('',#36526,(#36530,#36537),.PCURVE_S1.); +#36526 = LINE('',#36527,#36528); +#36527 = CARTESIAN_POINT('',(3.,-0.43,5.551115123126E-17)); +#36528 = VECTOR('',#36529,1.); +#36529 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#36530 = PCURVE('',#33880,#36531); +#36531 = DEFINITIONAL_REPRESENTATION('',(#36532),#36536); +#36532 = LINE('',#36533,#36534); +#36533 = CARTESIAN_POINT('',(0.,0.)); +#36534 = VECTOR('',#36535,1.); +#36535 = DIRECTION('',(0.,-1.)); +#36536 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36537 = PCURVE('',#33852,#36538); +#36538 = DEFINITIONAL_REPRESENTATION('',(#36539),#36543); +#36539 = LINE('',#36540,#36541); +#36540 = CARTESIAN_POINT('',(0.35,-7.771561172375E-17)); +#36541 = VECTOR('',#36542,1.); +#36542 = DIRECTION('',(0.,-1.)); +#36543 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36544 = ORIENTED_EDGE('',*,*,#33864,.T.); +#36545 = ORIENTED_EDGE('',*,*,#36497,.F.); +#36546 = ORIENTED_EDGE('',*,*,#34474,.F.); +#36547 = ADVANCED_FACE('',(#36548),#33852,.F.); +#36548 = FACE_BOUND('',#36549,.F.); +#36549 = EDGE_LOOP('',(#36550,#36571,#36572,#36573)); +#36550 = ORIENTED_EDGE('',*,*,#36551,.T.); +#36551 = EDGE_CURVE('',#34428,#33808,#36552,.T.); +#36552 = SURFACE_CURVE('',#36553,(#36557,#36564),.PCURVE_S1.); +#36553 = LINE('',#36554,#36555); +#36554 = CARTESIAN_POINT('',(2.65,-0.43,5.551115123126E-17)); +#36555 = VECTOR('',#36556,1.); +#36556 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#36557 = PCURVE('',#33852,#36558); +#36558 = DEFINITIONAL_REPRESENTATION('',(#36559),#36563); +#36559 = LINE('',#36560,#36561); +#36560 = CARTESIAN_POINT('',(0.,0.)); +#36561 = VECTOR('',#36562,1.); +#36562 = DIRECTION('',(0.,-1.)); +#36563 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36564 = PCURVE('',#33824,#36565); +#36565 = DEFINITIONAL_REPRESENTATION('',(#36566),#36570); +#36566 = LINE('',#36567,#36568); +#36567 = CARTESIAN_POINT('',(4.712388980385,0.)); +#36568 = VECTOR('',#36569,1.); +#36569 = DIRECTION('',(0.,-1.)); +#36570 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36571 = ORIENTED_EDGE('',*,*,#33836,.T.); +#36572 = ORIENTED_EDGE('',*,*,#36524,.F.); +#36573 = ORIENTED_EDGE('',*,*,#34451,.F.); +#36574 = ADVANCED_FACE('',(#36575),#33824,.T.); +#36575 = FACE_BOUND('',#36576,.T.); +#36576 = EDGE_LOOP('',(#36577,#36578,#36579,#36580)); +#36577 = ORIENTED_EDGE('',*,*,#34427,.T.); +#36578 = ORIENTED_EDGE('',*,*,#36551,.T.); +#36579 = ORIENTED_EDGE('',*,*,#33807,.F.); +#36580 = ORIENTED_EDGE('',*,*,#36581,.F.); +#36581 = EDGE_CURVE('',#34405,#33780,#36582,.T.); +#36582 = SURFACE_CURVE('',#36583,(#36587,#36594),.PCURVE_S1.); +#36583 = LINE('',#36584,#36585); +#36584 = CARTESIAN_POINT('',(2.35,-0.43,0.3)); +#36585 = VECTOR('',#36586,1.); +#36586 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#36587 = PCURVE('',#33824,#36588); +#36588 = DEFINITIONAL_REPRESENTATION('',(#36589),#36593); +#36589 = LINE('',#36590,#36591); +#36590 = CARTESIAN_POINT('',(6.28318530718,1.110223024625E-16)); +#36591 = VECTOR('',#36592,1.); +#36592 = DIRECTION('',(0.,-1.)); +#36593 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36594 = PCURVE('',#33795,#36595); +#36595 = DEFINITIONAL_REPRESENTATION('',(#36596),#36600); +#36596 = LINE('',#36597,#36598); +#36597 = CARTESIAN_POINT('',(0.425,-9.860761315258E-32)); +#36598 = VECTOR('',#36599,1.); +#36599 = DIRECTION('',(7.584527938158E-44,-1.)); +#36600 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36601 = ADVANCED_FACE('',(#36602),#33795,.F.); +#36602 = FACE_BOUND('',#36603,.F.); +#36603 = EDGE_LOOP('',(#36604,#36605,#36606,#36607)); +#36604 = ORIENTED_EDGE('',*,*,#34621,.T.); +#36605 = ORIENTED_EDGE('',*,*,#33779,.T.); +#36606 = ORIENTED_EDGE('',*,*,#36581,.F.); +#36607 = ORIENTED_EDGE('',*,*,#34404,.F.); +#36608 = ADVANCED_FACE('',(#36609),#34728,.F.); +#36609 = FACE_BOUND('',#36610,.F.); +#36610 = EDGE_LOOP('',(#36611,#36612,#36613,#36635)); +#36611 = ORIENTED_EDGE('',*,*,#34745,.T.); +#36612 = ORIENTED_EDGE('',*,*,#34715,.T.); +#36613 = ORIENTED_EDGE('',*,*,#36614,.F.); +#36614 = EDGE_CURVE('',#36615,#34694,#36617,.T.); +#36615 = VERTEX_POINT('',#36616); +#36616 = CARTESIAN_POINT('',(-1.7375,2.375,1.025)); +#36617 = SURFACE_CURVE('',#36618,(#36622,#36628),.PCURVE_S1.); +#36618 = LINE('',#36619,#36620); +#36619 = CARTESIAN_POINT('',(-1.7375,2.375,1.025)); +#36620 = VECTOR('',#36621,1.); +#36621 = DIRECTION('',(1.,2.22044604925E-16,0.)); +#36622 = PCURVE('',#34728,#36623); +#36623 = DEFINITIONAL_REPRESENTATION('',(#36624),#36627); +#36624 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36625,#36626),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,3.475),.PIECEWISE_BEZIER_KNOTS.); +#36625 = CARTESIAN_POINT('',(-3.273357244571E-16,1.)); +#36626 = CARTESIAN_POINT('',(3.55,1.)); +#36627 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36628 = PCURVE('',#34826,#36629); +#36629 = DEFINITIONAL_REPRESENTATION('',(#36630),#36634); +#36630 = LINE('',#36631,#36632); +#36631 = CARTESIAN_POINT('',(-1.062162001898E-16,3.830465704938E-18)); +#36632 = VECTOR('',#36633,1.); +#36633 = DIRECTION('',(1.,-5.016767432657E-17)); +#36634 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36635 = ORIENTED_EDGE('',*,*,#36636,.F.); +#36636 = EDGE_CURVE('',#34746,#36615,#36637,.T.); +#36637 = SURFACE_CURVE('',#36638,(#36641,#36648),.PCURVE_S1.); +#36638 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36639,#36640),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#36639 = CARTESIAN_POINT('',(-1.775,2.45,1.025)); +#36640 = CARTESIAN_POINT('',(-1.7375,2.375,1.025)); +#36641 = PCURVE('',#34728,#36642); +#36642 = DEFINITIONAL_REPRESENTATION('',(#36643),#36647); +#36643 = LINE('',#36644,#36645); +#36644 = CARTESIAN_POINT('',(3.586217722922E-17,1.041987532702E-15)); +#36645 = VECTOR('',#36646,1.); +#36646 = DIRECTION('',(-1.363609671586E-16,1.)); +#36647 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36648 = PCURVE('',#36178,#36649); +#36649 = DEFINITIONAL_REPRESENTATION('',(#36650),#36654); +#36650 = LINE('',#36651,#36652); +#36651 = CARTESIAN_POINT('',(0.247487373415,-4.08016779168E-15)); +#36652 = VECTOR('',#36653,1.); +#36653 = DIRECTION('',(2.775557561563E-17,1.)); +#36654 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36655 = ADVANCED_FACE('',(#36656),#34826,.F.); +#36656 = FACE_BOUND('',#36657,.F.); +#36657 = EDGE_LOOP('',(#36658,#36659,#36660,#36661)); +#36658 = ORIENTED_EDGE('',*,*,#36614,.T.); +#36659 = ORIENTED_EDGE('',*,*,#34813,.T.); +#36660 = ORIENTED_EDGE('',*,*,#34841,.F.); +#36661 = ORIENTED_EDGE('',*,*,#36662,.F.); +#36662 = EDGE_CURVE('',#36615,#34842,#36663,.T.); +#36663 = SURFACE_CURVE('',#36664,(#36667,#36674),.PCURVE_S1.); +#36664 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36665,#36666),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#36665 = CARTESIAN_POINT('',(-1.7375,2.375,1.025)); +#36666 = CARTESIAN_POINT('',(-1.680085640382,2.260171280765,1.75)); +#36667 = PCURVE('',#34826,#36668); +#36668 = DEFINITIONAL_REPRESENTATION('',(#36669),#36673); +#36669 = LINE('',#36670,#36671); +#36670 = CARTESIAN_POINT('',(-1.062162001898E-16,3.830465704938E-18)); +#36671 = VECTOR('',#36672,1.); +#36672 = DIRECTION('',(3.757404270073E-16,1.)); +#36673 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36674 = PCURVE('',#34982,#36675); +#36675 = DEFINITIONAL_REPRESENTATION('',(#36676),#36680); +#36676 = LINE('',#36677,#36678); +#36677 = CARTESIAN_POINT('',(0.194454364826,1.463361621183E-16)); +#36678 = VECTOR('',#36679,1.); +#36679 = DIRECTION('',(-5.273559366969E-16,1.)); +#36680 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36681 = ADVANCED_FACE('',(#36682),#34982,.F.); +#36682 = FACE_BOUND('',#36683,.F.); +#36683 = EDGE_LOOP('',(#36684,#36706,#36707,#36708)); +#36684 = ORIENTED_EDGE('',*,*,#36685,.T.); +#36685 = EDGE_CURVE('',#36686,#36615,#36688,.T.); +#36686 = VERTEX_POINT('',#36687); +#36687 = CARTESIAN_POINT('',(-1.875,2.2375,1.025)); +#36688 = SURFACE_CURVE('',#36689,(#36693,#36700),.PCURVE_S1.); +#36689 = LINE('',#36690,#36691); +#36690 = CARTESIAN_POINT('',(-1.875,2.2375,1.025)); +#36691 = VECTOR('',#36692,1.); +#36692 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#36693 = PCURVE('',#34982,#36694); +#36694 = DEFINITIONAL_REPRESENTATION('',(#36695),#36699); +#36695 = LINE('',#36696,#36697); +#36696 = CARTESIAN_POINT('',(-1.318037530753E-16,1.463330846146E-16)); +#36697 = VECTOR('',#36698,1.); +#36698 = DIRECTION('',(1.,1.81974050535E-16)); +#36699 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36700 = PCURVE('',#36178,#36701); +#36701 = DEFINITIONAL_REPRESENTATION('',(#36702),#36705); +#36702 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36703,#36704),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,0.194454364826),.PIECEWISE_BEZIER_KNOTS.); +#36703 = CARTESIAN_POINT('',(5.446312357614E-16,1.)); +#36704 = CARTESIAN_POINT('',(0.247487373415,1.)); +#36705 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36706 = ORIENTED_EDGE('',*,*,#36662,.T.); +#36707 = ORIENTED_EDGE('',*,*,#34968,.F.); +#36708 = ORIENTED_EDGE('',*,*,#36709,.F.); +#36709 = EDGE_CURVE('',#36686,#34942,#36710,.T.); +#36710 = SURFACE_CURVE('',#36711,(#36714,#36721),.PCURVE_S1.); +#36711 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36712,#36713),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#36712 = CARTESIAN_POINT('',(-1.875,2.2375,1.025)); +#36713 = CARTESIAN_POINT('',(-1.760171280765,2.180085640382,1.75)); +#36714 = PCURVE('',#34982,#36715); +#36715 = DEFINITIONAL_REPRESENTATION('',(#36716),#36720); +#36716 = LINE('',#36717,#36718); +#36717 = CARTESIAN_POINT('',(-1.318037530753E-16,1.463330846146E-16)); +#36718 = VECTOR('',#36719,1.); +#36719 = DIRECTION('',(2.6730391658E-16,1.)); +#36720 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36721 = PCURVE('',#34957,#36722); +#36722 = DEFINITIONAL_REPRESENTATION('',(#36723),#36727); +#36723 = LINE('',#36724,#36725); +#36724 = CARTESIAN_POINT('',(4.475,1.080348556673E-16)); +#36725 = VECTOR('',#36726,1.); +#36726 = DIRECTION('',(0.,1.)); +#36727 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36728 = ADVANCED_FACE('',(#36729),#34957,.F.); +#36729 = FACE_BOUND('',#36730,.F.); +#36730 = EDGE_LOOP('',(#36731,#36755,#36783,#36805,#36833,#36855,#36883, + #36905,#36933,#36953,#36954,#36955)); +#36731 = ORIENTED_EDGE('',*,*,#36732,.T.); +#36732 = EDGE_CURVE('',#36733,#36735,#36737,.T.); +#36733 = VERTEX_POINT('',#36734); +#36734 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#36735 = VERTEX_POINT('',#36736); +#36736 = CARTESIAN_POINT('',(-1.875,-2.11,1.025)); +#36737 = SURFACE_CURVE('',#36738,(#36742,#36749),.PCURVE_S1.); +#36738 = LINE('',#36739,#36740); +#36739 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#36740 = VECTOR('',#36741,1.); +#36741 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#36742 = PCURVE('',#34957,#36743); +#36743 = DEFINITIONAL_REPRESENTATION('',(#36744),#36748); +#36744 = LINE('',#36745,#36746); +#36745 = CARTESIAN_POINT('',(9.892682991552E-17,9.298836221054E-17)); +#36746 = VECTOR('',#36747,1.); +#36747 = DIRECTION('',(1.,6.324161807868E-16)); +#36748 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36749 = PCURVE('',#35507,#36750); +#36750 = DEFINITIONAL_REPRESENTATION('',(#36751),#36754); +#36751 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36752,#36753),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,0.1275),.PIECEWISE_BEZIER_KNOTS.); +#36752 = CARTESIAN_POINT('',(6.122066019203E-16,1.)); +#36753 = CARTESIAN_POINT('',(0.129636871508,1.)); +#36754 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36755 = ORIENTED_EDGE('',*,*,#36756,.T.); +#36756 = EDGE_CURVE('',#36735,#36757,#36759,.T.); +#36757 = VERTEX_POINT('',#36758); +#36758 = CARTESIAN_POINT('',(-1.875,-1.7,1.025)); +#36759 = SURFACE_CURVE('',#36760,(#36764,#36771),.PCURVE_S1.); +#36760 = LINE('',#36761,#36762); +#36761 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#36762 = VECTOR('',#36763,1.); +#36763 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#36764 = PCURVE('',#34957,#36765); +#36765 = DEFINITIONAL_REPRESENTATION('',(#36766),#36770); +#36766 = LINE('',#36767,#36768); +#36767 = CARTESIAN_POINT('',(-1.110223024625E-16,2.030520704916E-16)); +#36768 = VECTOR('',#36769,1.); +#36769 = DIRECTION('',(1.,-2.308285900451E-16)); +#36770 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36771 = PCURVE('',#36772,#36777); +#36772 = PLANE('',#36773); +#36773 = AXIS2_PLACEMENT_3D('',#36774,#36775,#36776); +#36774 = CARTESIAN_POINT('',(-2.25,-2.11,1.025)); +#36775 = DIRECTION('',(-0.,0.,-1.)); +#36776 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#36777 = DEFINITIONAL_REPRESENTATION('',(#36778),#36782); +#36778 = LINE('',#36779,#36780); +#36779 = CARTESIAN_POINT('',(0.375,0.1275)); +#36780 = VECTOR('',#36781,1.); +#36781 = DIRECTION('',(-1.224646799147E-16,-1.)); +#36782 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36783 = ORIENTED_EDGE('',*,*,#36784,.T.); +#36784 = EDGE_CURVE('',#36757,#36785,#36787,.T.); +#36785 = VERTEX_POINT('',#36786); +#36786 = CARTESIAN_POINT('',(-1.875,-0.84,1.025)); +#36787 = SURFACE_CURVE('',#36788,(#36792,#36799),.PCURVE_S1.); +#36788 = LINE('',#36789,#36790); +#36789 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#36790 = VECTOR('',#36791,1.); +#36791 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#36792 = PCURVE('',#34957,#36793); +#36793 = DEFINITIONAL_REPRESENTATION('',(#36794),#36798); +#36794 = LINE('',#36795,#36796); +#36795 = CARTESIAN_POINT('',(0.,2.08919418951E-18)); +#36796 = VECTOR('',#36797,1.); +#36797 = DIRECTION('',(1.,5.501662465529E-17)); +#36798 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36799 = PCURVE('',#35828,#36800); +#36800 = DEFINITIONAL_REPRESENTATION('',(#36801),#36804); +#36801 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36802,#36803),.UNSPECIFIED., + .F.,.F.,(2,2),(0.5375,1.3975),.PIECEWISE_BEZIER_KNOTS.); +#36802 = CARTESIAN_POINT('',(0.546508379888,1.)); +#36803 = CARTESIAN_POINT('',(1.420921787709,1.)); +#36804 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36805 = ORIENTED_EDGE('',*,*,#36806,.T.); +#36806 = EDGE_CURVE('',#36785,#36807,#36809,.T.); +#36807 = VERTEX_POINT('',#36808); +#36808 = CARTESIAN_POINT('',(-1.875,-0.43,1.025)); +#36809 = SURFACE_CURVE('',#36810,(#36814,#36821),.PCURVE_S1.); +#36810 = LINE('',#36811,#36812); +#36811 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#36812 = VECTOR('',#36813,1.); +#36813 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#36814 = PCURVE('',#34957,#36815); +#36815 = DEFINITIONAL_REPRESENTATION('',(#36816),#36820); +#36816 = LINE('',#36817,#36818); +#36817 = CARTESIAN_POINT('',(2.22044604925E-16,1.929411984959E-16)); +#36818 = VECTOR('',#36819,1.); +#36819 = DIRECTION('',(1.,-1.154113379257E-16)); +#36820 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36821 = PCURVE('',#36822,#36827); +#36822 = PLANE('',#36823); +#36823 = AXIS2_PLACEMENT_3D('',#36824,#36825,#36826); +#36824 = CARTESIAN_POINT('',(-2.25,-0.84,1.025)); +#36825 = DIRECTION('',(-0.,0.,-1.)); +#36826 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#36827 = DEFINITIONAL_REPRESENTATION('',(#36828),#36832); +#36828 = LINE('',#36829,#36830); +#36829 = CARTESIAN_POINT('',(0.375,1.3975)); +#36830 = VECTOR('',#36831,1.); +#36831 = DIRECTION('',(-1.224646799147E-16,-1.)); +#36832 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36833 = ORIENTED_EDGE('',*,*,#36834,.T.); +#36834 = EDGE_CURVE('',#36807,#36835,#36837,.T.); +#36835 = VERTEX_POINT('',#36836); +#36836 = CARTESIAN_POINT('',(-1.875,0.43,1.025)); +#36837 = SURFACE_CURVE('',#36838,(#36842,#36849),.PCURVE_S1.); +#36838 = LINE('',#36839,#36840); +#36839 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#36840 = VECTOR('',#36841,1.); +#36841 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#36842 = PCURVE('',#34957,#36843); +#36843 = DEFINITIONAL_REPRESENTATION('',(#36844),#36848); +#36844 = LINE('',#36845,#36846); +#36845 = CARTESIAN_POINT('',(0.,-1.103120379896E-16)); +#36846 = VECTOR('',#36847,1.); +#36847 = DIRECTION('',(1.,2.819575854973E-21)); +#36848 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36849 = PCURVE('',#36147,#36850); +#36850 = DEFINITIONAL_REPRESENTATION('',(#36851),#36854); +#36851 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36852,#36853),.UNSPECIFIED., + .F.,.F.,(2,2),(1.8075,2.6675),.PIECEWISE_BEZIER_KNOTS.); +#36852 = CARTESIAN_POINT('',(1.837793296089,1.)); +#36853 = CARTESIAN_POINT('',(2.712206703911,1.)); +#36854 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36855 = ORIENTED_EDGE('',*,*,#36856,.T.); +#36856 = EDGE_CURVE('',#36835,#36857,#36859,.T.); +#36857 = VERTEX_POINT('',#36858); +#36858 = CARTESIAN_POINT('',(-1.875,0.84,1.025)); +#36859 = SURFACE_CURVE('',#36860,(#36864,#36871),.PCURVE_S1.); +#36860 = LINE('',#36861,#36862); +#36861 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#36862 = VECTOR('',#36863,1.); +#36863 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#36864 = PCURVE('',#34957,#36865); +#36865 = DEFINITIONAL_REPRESENTATION('',(#36866),#36870); +#36866 = LINE('',#36867,#36868); +#36867 = CARTESIAN_POINT('',(0.,-8.206977039385E-16)); +#36868 = VECTOR('',#36869,1.); +#36869 = DIRECTION('',(1.,2.308345043547E-16)); +#36870 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36871 = PCURVE('',#36872,#36877); +#36872 = PLANE('',#36873); +#36873 = AXIS2_PLACEMENT_3D('',#36874,#36875,#36876); +#36874 = CARTESIAN_POINT('',(-2.25,0.43,1.025)); +#36875 = DIRECTION('',(-0.,0.,-1.)); +#36876 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#36877 = DEFINITIONAL_REPRESENTATION('',(#36878),#36882); +#36878 = LINE('',#36879,#36880); +#36879 = CARTESIAN_POINT('',(0.375,2.6675)); +#36880 = VECTOR('',#36881,1.); +#36881 = DIRECTION('',(-1.224646799147E-16,-1.)); +#36882 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36883 = ORIENTED_EDGE('',*,*,#36884,.T.); +#36884 = EDGE_CURVE('',#36857,#36885,#36887,.T.); +#36885 = VERTEX_POINT('',#36886); +#36886 = CARTESIAN_POINT('',(-1.875,1.7,1.025)); +#36887 = SURFACE_CURVE('',#36888,(#36892,#36899),.PCURVE_S1.); +#36888 = LINE('',#36889,#36890); +#36889 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#36890 = VECTOR('',#36891,1.); +#36891 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#36892 = PCURVE('',#34957,#36893); +#36893 = DEFINITIONAL_REPRESENTATION('',(#36894),#36898); +#36894 = LINE('',#36895,#36896); +#36895 = CARTESIAN_POINT('',(0.,-2.04955340595E-16)); +#36896 = VECTOR('',#36897,1.); +#36897 = DIRECTION('',(1.,2.819498569694E-21)); +#36898 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36899 = PCURVE('',#35909,#36900); +#36900 = DEFINITIONAL_REPRESENTATION('',(#36901),#36904); +#36901 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36902,#36903),.UNSPECIFIED., + .F.,.F.,(2,2),(3.0775,3.9375),.PIECEWISE_BEZIER_KNOTS.); +#36902 = CARTESIAN_POINT('',(3.129078212291,1.)); +#36903 = CARTESIAN_POINT('',(4.003491620112,1.)); +#36904 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36905 = ORIENTED_EDGE('',*,*,#36906,.T.); +#36906 = EDGE_CURVE('',#36885,#36907,#36909,.T.); +#36907 = VERTEX_POINT('',#36908); +#36908 = CARTESIAN_POINT('',(-1.875,2.11,1.025)); +#36909 = SURFACE_CURVE('',#36910,(#36914,#36921),.PCURVE_S1.); +#36910 = LINE('',#36911,#36912); +#36911 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#36912 = VECTOR('',#36913,1.); +#36913 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#36914 = PCURVE('',#34957,#36915); +#36915 = DEFINITIONAL_REPRESENTATION('',(#36916),#36920); +#36916 = LINE('',#36917,#36918); +#36917 = CARTESIAN_POINT('',(4.440892098501E-16,1.457818411555E-15)); +#36918 = VECTOR('',#36919,1.); +#36919 = DIRECTION('',(1.,-3.824640944042E-16)); +#36920 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36921 = PCURVE('',#36922,#36927); +#36922 = PLANE('',#36923); +#36923 = AXIS2_PLACEMENT_3D('',#36924,#36925,#36926); +#36924 = CARTESIAN_POINT('',(-2.25,1.7,1.025)); +#36925 = DIRECTION('',(-0.,0.,-1.)); +#36926 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#36927 = DEFINITIONAL_REPRESENTATION('',(#36928),#36932); +#36928 = LINE('',#36929,#36930); +#36929 = CARTESIAN_POINT('',(0.375,3.9375)); +#36930 = VECTOR('',#36931,1.); +#36931 = DIRECTION('',(-1.224646799147E-16,-1.)); +#36932 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36933 = ORIENTED_EDGE('',*,*,#36934,.T.); +#36934 = EDGE_CURVE('',#36907,#36686,#36935,.T.); +#36935 = SURFACE_CURVE('',#36936,(#36940,#36947),.PCURVE_S1.); +#36936 = LINE('',#36937,#36938); +#36937 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#36938 = VECTOR('',#36939,1.); +#36939 = DIRECTION('',(-2.22044604925E-16,1.,0.)); +#36940 = PCURVE('',#34957,#36941); +#36941 = DEFINITIONAL_REPRESENTATION('',(#36942),#36946); +#36942 = LINE('',#36943,#36944); +#36943 = CARTESIAN_POINT('',(0.,6.427961929068E-15)); +#36944 = VECTOR('',#36945,1.); +#36945 = DIRECTION('',(1.,-1.489613775567E-15)); +#36946 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36947 = PCURVE('',#35585,#36948); +#36948 = DEFINITIONAL_REPRESENTATION('',(#36949),#36952); +#36949 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36950,#36951),.UNSPECIFIED., + .F.,.F.,(2,2),(4.3475,4.475),.PIECEWISE_BEZIER_KNOTS.); +#36950 = CARTESIAN_POINT('',(4.420363128492,1.)); +#36951 = CARTESIAN_POINT('',(4.55,1.)); +#36952 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36953 = ORIENTED_EDGE('',*,*,#36709,.T.); +#36954 = ORIENTED_EDGE('',*,*,#34941,.F.); +#36955 = ORIENTED_EDGE('',*,*,#36956,.F.); +#36956 = EDGE_CURVE('',#36733,#34915,#36957,.T.); +#36957 = SURFACE_CURVE('',#36958,(#36961,#36968),.PCURVE_S1.); +#36958 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36959,#36960),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#36959 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#36960 = CARTESIAN_POINT('',(-1.760171280765,-2.180085640382,1.75)); +#36961 = PCURVE('',#34957,#36962); +#36962 = DEFINITIONAL_REPRESENTATION('',(#36963),#36967); +#36963 = LINE('',#36964,#36965); +#36964 = CARTESIAN_POINT('',(9.892682991552E-17,9.298836221054E-17)); +#36965 = VECTOR('',#36966,1.); +#36966 = DIRECTION('',(-1.319780525915E-16,1.)); +#36967 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36968 = PCURVE('',#34930,#36969); +#36969 = DEFINITIONAL_REPRESENTATION('',(#36970),#36974); +#36970 = LINE('',#36971,#36972); +#36971 = CARTESIAN_POINT('',(0.194454364826,4.01822944048E-17)); +#36972 = VECTOR('',#36973,1.); +#36973 = DIRECTION('',(2.498001805407E-16,1.)); +#36974 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36975 = ADVANCED_FACE('',(#36976),#34930,.F.); +#36976 = FACE_BOUND('',#36977,.F.); +#36977 = EDGE_LOOP('',(#36978,#37000,#37001,#37002)); +#36978 = ORIENTED_EDGE('',*,*,#36979,.T.); +#36979 = EDGE_CURVE('',#36980,#36733,#36982,.T.); +#36980 = VERTEX_POINT('',#36981); +#36981 = CARTESIAN_POINT('',(-1.7375,-2.375,1.025)); +#36982 = SURFACE_CURVE('',#36983,(#36987,#36994),.PCURVE_S1.); +#36983 = LINE('',#36984,#36985); +#36984 = CARTESIAN_POINT('',(-1.7375,-2.375,1.025)); +#36985 = VECTOR('',#36986,1.); +#36986 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#36987 = PCURVE('',#34930,#36988); +#36988 = DEFINITIONAL_REPRESENTATION('',(#36989),#36993); +#36989 = LINE('',#36990,#36991); +#36990 = CARTESIAN_POINT('',(2.520333281894E-17,1.463398608857E-16)); +#36991 = VECTOR('',#36992,1.); +#36992 = DIRECTION('',(1.,-5.45925346422E-16)); +#36993 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#36994 = PCURVE('',#35447,#36995); +#36995 = DEFINITIONAL_REPRESENTATION('',(#36996),#36999); +#36996 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#36997,#36998),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,0.194454364826),.PIECEWISE_BEZIER_KNOTS.); +#36997 = CARTESIAN_POINT('',(-3.328677979189E-16,1.)); +#36998 = CARTESIAN_POINT('',(0.247487373415,1.)); +#36999 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37000 = ORIENTED_EDGE('',*,*,#36956,.T.); +#37001 = ORIENTED_EDGE('',*,*,#34914,.F.); +#37002 = ORIENTED_EDGE('',*,*,#37003,.F.); +#37003 = EDGE_CURVE('',#36980,#34888,#37004,.T.); +#37004 = SURFACE_CURVE('',#37005,(#37008,#37015),.PCURVE_S1.); +#37005 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#37006,#37007),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#37006 = CARTESIAN_POINT('',(-1.7375,-2.375,1.025)); +#37007 = CARTESIAN_POINT('',(-1.680085640382,-2.260171280765,1.75)); +#37008 = PCURVE('',#34930,#37009); +#37009 = DEFINITIONAL_REPRESENTATION('',(#37010),#37014); +#37010 = LINE('',#37011,#37012); +#37011 = CARTESIAN_POINT('',(2.520333281894E-17,1.463398608857E-16)); +#37012 = VECTOR('',#37013,1.); +#37013 = DIRECTION('',(1.127506532616E-16,1.)); +#37014 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37015 = PCURVE('',#34903,#37016); +#37016 = DEFINITIONAL_REPRESENTATION('',(#37017),#37021); +#37017 = LINE('',#37018,#37019); +#37018 = CARTESIAN_POINT('',(3.475,2.229134430816E-16)); +#37019 = VECTOR('',#37020,1.); +#37020 = DIRECTION('',(0.,1.)); +#37021 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37022 = ADVANCED_FACE('',(#37023),#34903,.F.); +#37023 = FACE_BOUND('',#37024,.F.); +#37024 = EDGE_LOOP('',(#37025,#37045,#37046,#37047)); +#37025 = ORIENTED_EDGE('',*,*,#37026,.T.); +#37026 = EDGE_CURVE('',#35032,#36980,#37027,.T.); +#37027 = SURFACE_CURVE('',#37028,(#37032,#37039),.PCURVE_S1.); +#37028 = LINE('',#37029,#37030); +#37029 = CARTESIAN_POINT('',(1.7375,-2.375,1.025)); +#37030 = VECTOR('',#37031,1.); +#37031 = DIRECTION('',(-1.,-2.22044604925E-16,0.)); +#37032 = PCURVE('',#34903,#37033); +#37033 = DEFINITIONAL_REPRESENTATION('',(#37034),#37038); +#37034 = LINE('',#37035,#37036); +#37035 = CARTESIAN_POINT('',(-1.062162001898E-16,3.830465704938E-18)); +#37036 = VECTOR('',#37037,1.); +#37037 = DIRECTION('',(1.,-5.016767432657E-17)); +#37038 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37039 = PCURVE('',#35396,#37040); +#37040 = DEFINITIONAL_REPRESENTATION('',(#37041),#37044); +#37041 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#37042,#37043),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,3.475),.PIECEWISE_BEZIER_KNOTS.); +#37042 = CARTESIAN_POINT('',(-3.273357244571E-16,1.)); +#37043 = CARTESIAN_POINT('',(3.55,1.)); +#37044 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37045 = ORIENTED_EDGE('',*,*,#37003,.T.); +#37046 = ORIENTED_EDGE('',*,*,#34887,.F.); +#37047 = ORIENTED_EDGE('',*,*,#35053,.F.); +#37048 = ADVANCED_FACE('',(#37049),#35016,.F.); +#37049 = FACE_BOUND('',#37050,.F.); +#37050 = EDGE_LOOP('',(#37051,#37080,#37101,#37102)); +#37051 = ORIENTED_EDGE('',*,*,#37052,.T.); +#37052 = EDGE_CURVE('',#37053,#37053,#37055,.T.); +#37053 = VERTEX_POINT('',#37054); +#37054 = CARTESIAN_POINT('',(-1.110171280765,1.310171280765,1.7)); +#37055 = SURFACE_CURVE('',#37056,(#37061,#37068),.PCURVE_S1.); +#37056 = CIRCLE('',#37057,0.3); +#37057 = AXIS2_PLACEMENT_3D('',#37058,#37059,#37060); +#37058 = CARTESIAN_POINT('',(-1.110171280765,1.610171280765,1.7)); +#37059 = DIRECTION('',(-0.,0.,1.)); +#37060 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#37061 = PCURVE('',#35016,#37062); +#37062 = DEFINITIONAL_REPRESENTATION('',(#37063),#37067); +#37063 = LINE('',#37064,#37065); +#37064 = CARTESIAN_POINT('',(6.28318530718,5.E-02)); +#37065 = VECTOR('',#37066,1.); +#37066 = DIRECTION('',(-1.,0.)); +#37067 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37068 = PCURVE('',#37069,#37074); +#37069 = PLANE('',#37070); +#37070 = AXIS2_PLACEMENT_3D('',#37071,#37072,#37073); +#37071 = CARTESIAN_POINT('',(-1.110171280765,1.610171280765,1.7)); +#37072 = DIRECTION('',(0.,0.,1.)); +#37073 = DIRECTION('',(2.22044604925E-16,-1.,0.)); +#37074 = DEFINITIONAL_REPRESENTATION('',(#37075),#37079); +#37075 = CIRCLE('',#37076,0.3); +#37076 = AXIS2_PLACEMENT_2D('',#37077,#37078); +#37077 = CARTESIAN_POINT('',(0.,0.)); +#37078 = DIRECTION('',(1.,0.)); +#37079 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37080 = ORIENTED_EDGE('',*,*,#37081,.F.); +#37081 = EDGE_CURVE('',#34996,#37053,#37082,.T.); +#37082 = SEAM_CURVE('',#37083,(#37087,#37094),.PCURVE_S1.); +#37083 = LINE('',#37084,#37085); +#37084 = CARTESIAN_POINT('',(-1.110171280765,1.310171280765,1.75)); +#37085 = VECTOR('',#37086,1.); +#37086 = DIRECTION('',(0.,-0.,-1.)); +#37087 = PCURVE('',#35016,#37088); +#37088 = DEFINITIONAL_REPRESENTATION('',(#37089),#37093); +#37089 = LINE('',#37090,#37091); +#37090 = CARTESIAN_POINT('',(0.,0.)); +#37091 = VECTOR('',#37092,1.); +#37092 = DIRECTION('',(0.,1.)); +#37093 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37094 = PCURVE('',#35016,#37095); +#37095 = DEFINITIONAL_REPRESENTATION('',(#37096),#37100); +#37096 = LINE('',#37097,#37098); +#37097 = CARTESIAN_POINT('',(6.28318530718,0.)); +#37098 = VECTOR('',#37099,1.); +#37099 = DIRECTION('',(0.,1.)); +#37100 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37101 = ORIENTED_EDGE('',*,*,#34995,.F.); +#37102 = ORIENTED_EDGE('',*,*,#37081,.T.); +#37103 = ADVANCED_FACE('',(#37104),#35396,.F.); +#37104 = FACE_BOUND('',#37105,.F.); +#37105 = EDGE_LOOP('',(#37106,#37107,#37127,#37128)); +#37106 = ORIENTED_EDGE('',*,*,#35382,.T.); +#37107 = ORIENTED_EDGE('',*,*,#37108,.T.); +#37108 = EDGE_CURVE('',#35363,#36980,#37109,.T.); +#37109 = SURFACE_CURVE('',#37110,(#37113,#37120),.PCURVE_S1.); +#37110 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#37111,#37112),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#37111 = CARTESIAN_POINT('',(-1.775,-2.45,1.025)); +#37112 = CARTESIAN_POINT('',(-1.7375,-2.375,1.025)); +#37113 = PCURVE('',#35396,#37114); +#37114 = DEFINITIONAL_REPRESENTATION('',(#37115),#37119); +#37115 = LINE('',#37116,#37117); +#37116 = CARTESIAN_POINT('',(3.55,1.042276600342E-15)); +#37117 = VECTOR('',#37118,1.); +#37118 = DIRECTION('',(4.440892098501E-16,1.)); +#37119 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37120 = PCURVE('',#35447,#37121); +#37121 = DEFINITIONAL_REPRESENTATION('',(#37122),#37126); +#37122 = LINE('',#37123,#37124); +#37123 = CARTESIAN_POINT('',(-1.427240192909E-16,-5.26430630895E-15)); +#37124 = VECTOR('',#37125,1.); +#37125 = DIRECTION('',(3.427360861369E-16,1.)); +#37126 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37127 = ORIENTED_EDGE('',*,*,#37026,.F.); +#37128 = ORIENTED_EDGE('',*,*,#36195,.F.); +#37129 = ADVANCED_FACE('',(#37130),#35447,.F.); +#37130 = FACE_BOUND('',#37131,.F.); +#37131 = EDGE_LOOP('',(#37132,#37133,#37153,#37154)); +#37132 = ORIENTED_EDGE('',*,*,#35433,.T.); +#37133 = ORIENTED_EDGE('',*,*,#37134,.T.); +#37134 = EDGE_CURVE('',#35414,#36733,#37135,.T.); +#37135 = SURFACE_CURVE('',#37136,(#37139,#37146),.PCURVE_S1.); +#37136 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#37137,#37138),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#37137 = CARTESIAN_POINT('',(-1.95,-2.275,1.025)); +#37138 = CARTESIAN_POINT('',(-1.875,-2.2375,1.025)); +#37139 = PCURVE('',#35447,#37140); +#37140 = DEFINITIONAL_REPRESENTATION('',(#37141),#37145); +#37141 = LINE('',#37142,#37143); +#37142 = CARTESIAN_POINT('',(0.247487373415,-4.47881987592E-15)); +#37143 = VECTOR('',#37144,1.); +#37144 = DIRECTION('',(3.330669073875E-16,1.)); +#37145 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37146 = PCURVE('',#35507,#37147); +#37147 = DEFINITIONAL_REPRESENTATION('',(#37148),#37152); +#37148 = LINE('',#37149,#37150); +#37149 = CARTESIAN_POINT('',(3.582431915782E-16,6.610125476969E-16)); +#37150 = VECTOR('',#37151,1.); +#37151 = DIRECTION('',(2.539634103421E-16,1.)); +#37152 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37153 = ORIENTED_EDGE('',*,*,#36979,.F.); +#37154 = ORIENTED_EDGE('',*,*,#37108,.F.); +#37155 = ADVANCED_FACE('',(#37156),#35507,.F.); +#37156 = FACE_BOUND('',#37157,.F.); +#37157 = EDGE_LOOP('',(#37158,#37159,#37160,#37203)); +#37158 = ORIENTED_EDGE('',*,*,#37134,.F.); +#37159 = ORIENTED_EDGE('',*,*,#35493,.T.); +#37160 = ORIENTED_EDGE('',*,*,#37161,.T.); +#37161 = EDGE_CURVE('',#35466,#36735,#37162,.T.); +#37162 = SURFACE_CURVE('',#37163,(#37167,#37196),.PCURVE_S1.); +#37163 = LINE('',#37164,#37165); +#37164 = CARTESIAN_POINT('',(-2.25,-2.11,1.025)); +#37165 = VECTOR('',#37166,1.); +#37166 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#37167 = PCURVE('',#35507,#37168); +#37168 = DEFINITIONAL_REPRESENTATION('',(#37169),#37195); +#37169 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#37170,#37171,#37172,#37173, + #37174,#37175,#37176,#37177,#37178,#37179,#37180,#37181,#37182, + #37183,#37184,#37185,#37186,#37187,#37188,#37189,#37190,#37191, + #37192,#37193,#37194),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1 + ,1,1,1,1,1,1,1,1,1,1,4),(0.3,0.303409090909,0.306818181818, + 0.310227272727,0.313636363636,0.317045454545,0.320454545455, + 0.323863636364,0.327272727273,0.330681818182,0.334090909091,0.3375, + 0.340909090909,0.344318181818,0.347727272727,0.351136363636, + 0.354545454545,0.357954545455,0.361363636364,0.364772727273, + 0.368181818182,0.371590909091,0.375),.QUASI_UNIFORM_KNOTS.); +#37170 = CARTESIAN_POINT('',(0.165,0.)); +#37171 = CARTESIAN_POINT('',(0.164473026972,1.515151515152E-02)); +#37172 = CARTESIAN_POINT('',(0.16341829125,4.545454545455E-02)); +#37173 = CARTESIAN_POINT('',(0.161833813323,9.090909090909E-02)); +#37174 = CARTESIAN_POINT('',(0.160246955707,0.136363636364)); +#37175 = CARTESIAN_POINT('',(0.158657713035,0.181818181818)); +#37176 = CARTESIAN_POINT('',(0.157066079927,0.227272727273)); +#37177 = CARTESIAN_POINT('',(0.155472050986,0.272727272727)); +#37178 = CARTESIAN_POINT('',(0.153875620797,0.318181818182)); +#37179 = CARTESIAN_POINT('',(0.15227678393,0.363636363636)); +#37180 = CARTESIAN_POINT('',(0.15067553494,0.409090909091)); +#37181 = CARTESIAN_POINT('',(0.149071868364,0.454545454545)); +#37182 = CARTESIAN_POINT('',(0.147465778721,0.5)); +#37183 = CARTESIAN_POINT('',(0.145857260518,0.545454545455)); +#37184 = CARTESIAN_POINT('',(0.14424630824,0.590909090909)); +#37185 = CARTESIAN_POINT('',(0.142632916359,0.636363636364)); +#37186 = CARTESIAN_POINT('',(0.141017079328,0.681818181818)); +#37187 = CARTESIAN_POINT('',(0.139398791586,0.727272727273)); +#37188 = CARTESIAN_POINT('',(0.137778047552,0.772727272727)); +#37189 = CARTESIAN_POINT('',(0.13615484163,0.818181818182)); +#37190 = CARTESIAN_POINT('',(0.134529168206,0.863636363636)); +#37191 = CARTESIAN_POINT('',(0.132901021649,0.909090909091)); +#37192 = CARTESIAN_POINT('',(0.131270396313,0.954545454545)); +#37193 = CARTESIAN_POINT('',(0.130181656456,0.984848484848)); +#37194 = CARTESIAN_POINT('',(0.129636871508,1.)); +#37195 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37196 = PCURVE('',#36772,#37197); +#37197 = DEFINITIONAL_REPRESENTATION('',(#37198),#37202); +#37198 = LINE('',#37199,#37200); +#37199 = CARTESIAN_POINT('',(0.,0.)); +#37200 = VECTOR('',#37201,1.); +#37201 = DIRECTION('',(1.,0.)); +#37202 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37203 = ORIENTED_EDGE('',*,*,#36732,.F.); +#37204 = ADVANCED_FACE('',(#37205),#35481,.F.); +#37205 = FACE_BOUND('',#37206,.F.); +#37206 = EDGE_LOOP('',(#37207,#37208,#37209,#37237,#37265,#37294,#37322, + #37350,#37378,#37411,#37439,#37468)); +#37207 = ORIENTED_EDGE('',*,*,#35465,.F.); +#37208 = ORIENTED_EDGE('',*,*,#35600,.T.); +#37209 = ORIENTED_EDGE('',*,*,#37210,.T.); +#37210 = EDGE_CURVE('',#35601,#37211,#37213,.T.); +#37211 = VERTEX_POINT('',#37212); +#37212 = CARTESIAN_POINT('',(-2.35,-2.11,0.725)); +#37213 = SURFACE_CURVE('',#37214,(#37219,#37230),.PCURVE_S1.); +#37214 = CIRCLE('',#37215,0.1); +#37215 = AXIS2_PLACEMENT_3D('',#37216,#37217,#37218); +#37216 = CARTESIAN_POINT('',(-2.25,-2.11,0.725)); +#37217 = DIRECTION('',(9.95799250103E-17,-1.,0.)); +#37218 = DIRECTION('',(-4.440892098501E-15,-4.422237021476E-31,1.)); +#37219 = PCURVE('',#35481,#37220); +#37220 = DEFINITIONAL_REPRESENTATION('',(#37221),#37229); +#37221 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#37222,#37223,#37224,#37225 + ,#37226,#37227,#37228),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#37222 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#37223 = CARTESIAN_POINT('',(0.292340342435,-7.415408746888E-03)); +#37224 = CARTESIAN_POINT('',(0.142340342435,7.918713163156E-02)); +#37225 = CARTESIAN_POINT('',(-7.659657565E-03,0.16578967201)); +#37226 = CARTESIAN_POINT('',(0.142340342435,0.252392212388)); +#37227 = CARTESIAN_POINT('',(0.292340342435,0.338994752767)); +#37228 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#37229 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37230 = PCURVE('',#35666,#37231); +#37231 = DEFINITIONAL_REPRESENTATION('',(#37232),#37236); +#37232 = LINE('',#37233,#37234); +#37233 = CARTESIAN_POINT('',(0.,0.)); +#37234 = VECTOR('',#37235,1.); +#37235 = DIRECTION('',(1.,0.)); +#37236 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37237 = ORIENTED_EDGE('',*,*,#37238,.T.); +#37238 = EDGE_CURVE('',#37211,#37239,#37241,.T.); +#37239 = VERTEX_POINT('',#37240); +#37240 = CARTESIAN_POINT('',(-2.35,-2.11,0.3)); +#37241 = SURFACE_CURVE('',#37242,(#37246,#37253),.PCURVE_S1.); +#37242 = LINE('',#37243,#37244); +#37243 = CARTESIAN_POINT('',(-2.35,-2.11,0.725)); +#37244 = VECTOR('',#37245,1.); +#37245 = DIRECTION('',(-1.044915787883E-15,-1.040526357994E-31,-1.)); +#37246 = PCURVE('',#35481,#37247); +#37247 = DEFINITIONAL_REPRESENTATION('',(#37248),#37252); +#37248 = LINE('',#37249,#37250); +#37249 = CARTESIAN_POINT('',(0.192340342435,6.578967201E-02)); +#37250 = VECTOR('',#37251,1.); +#37251 = DIRECTION('',(-1.,-1.044915787883E-15)); +#37252 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37253 = PCURVE('',#37254,#37259); +#37254 = PLANE('',#37255); +#37255 = AXIS2_PLACEMENT_3D('',#37256,#37257,#37258); +#37256 = CARTESIAN_POINT('',(-2.35,-2.11,0.725)); +#37257 = DIRECTION('',(-1.,-9.95799250103E-17,1.044915787883E-15)); +#37258 = DIRECTION('',(-1.044915787883E-15,-1.040526357994E-31,-1.)); +#37259 = DEFINITIONAL_REPRESENTATION('',(#37260),#37264); +#37260 = LINE('',#37261,#37262); +#37261 = CARTESIAN_POINT('',(-0.,0.)); +#37262 = VECTOR('',#37263,1.); +#37263 = DIRECTION('',(1.,0.)); +#37264 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37265 = ORIENTED_EDGE('',*,*,#37266,.T.); +#37266 = EDGE_CURVE('',#37239,#37267,#37269,.T.); +#37267 = VERTEX_POINT('',#37268); +#37268 = CARTESIAN_POINT('',(-2.65,-2.11,5.551115123126E-17)); +#37269 = SURFACE_CURVE('',#37270,(#37275,#37282),.PCURVE_S1.); +#37270 = CIRCLE('',#37271,0.3); +#37271 = AXIS2_PLACEMENT_3D('',#37272,#37273,#37274); +#37272 = CARTESIAN_POINT('',(-2.65,-2.11,0.3)); +#37273 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#37274 = DIRECTION('',(1.,9.95799250103E-17,3.515706244646E-15)); +#37275 = PCURVE('',#35481,#37276); +#37276 = DEFINITIONAL_REPRESENTATION('',(#37277),#37281); +#37277 = CIRCLE('',#37278,0.3); +#37278 = AXIS2_PLACEMENT_2D('',#37279,#37280); +#37279 = CARTESIAN_POINT('',(-0.232659657565,-0.23421032799)); +#37280 = DIRECTION('',(3.515706244646E-15,1.)); +#37281 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37282 = PCURVE('',#37283,#37288); +#37283 = CYLINDRICAL_SURFACE('',#37284,0.3); +#37284 = AXIS2_PLACEMENT_3D('',#37285,#37286,#37287); +#37285 = CARTESIAN_POINT('',(-2.65,-2.11,0.3)); +#37286 = DIRECTION('',(9.95799250103E-17,-1.,-0.)); +#37287 = DIRECTION('',(1.,9.95799250103E-17,3.515706244646E-15)); +#37288 = DEFINITIONAL_REPRESENTATION('',(#37289),#37293); +#37289 = LINE('',#37290,#37291); +#37290 = CARTESIAN_POINT('',(6.28318530718,0.)); +#37291 = VECTOR('',#37292,1.); +#37292 = DIRECTION('',(-1.,0.)); +#37293 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37294 = ORIENTED_EDGE('',*,*,#37295,.T.); +#37295 = EDGE_CURVE('',#37267,#37296,#37298,.T.); +#37296 = VERTEX_POINT('',#37297); +#37297 = CARTESIAN_POINT('',(-3.,-2.11,5.551115123126E-17)); +#37298 = SURFACE_CURVE('',#37299,(#37303,#37310),.PCURVE_S1.); +#37299 = LINE('',#37300,#37301); +#37300 = CARTESIAN_POINT('',(-2.65,-2.11,5.551115123126E-17)); +#37301 = VECTOR('',#37302,1.); +#37302 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#37303 = PCURVE('',#35481,#37304); +#37304 = DEFINITIONAL_REPRESENTATION('',(#37305),#37309); +#37305 = LINE('',#37306,#37307); +#37306 = CARTESIAN_POINT('',(-0.532659657565,-0.23421032799)); +#37307 = VECTOR('',#37308,1.); +#37308 = DIRECTION('',(0.,-1.)); +#37309 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37310 = PCURVE('',#37311,#37316); +#37311 = PLANE('',#37312); +#37312 = AXIS2_PLACEMENT_3D('',#37313,#37314,#37315); +#37313 = CARTESIAN_POINT('',(-2.65,-2.11,5.551115123126E-17)); +#37314 = DIRECTION('',(0.,0.,1.)); +#37315 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#37316 = DEFINITIONAL_REPRESENTATION('',(#37317),#37321); +#37317 = LINE('',#37318,#37319); +#37318 = CARTESIAN_POINT('',(0.,0.)); +#37319 = VECTOR('',#37320,1.); +#37320 = DIRECTION('',(1.,0.)); +#37321 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37322 = ORIENTED_EDGE('',*,*,#37323,.T.); +#37323 = EDGE_CURVE('',#37296,#37324,#37326,.T.); +#37324 = VERTEX_POINT('',#37325); +#37325 = CARTESIAN_POINT('',(-3.,-2.11,0.2)); +#37326 = SURFACE_CURVE('',#37327,(#37331,#37338),.PCURVE_S1.); +#37327 = LINE('',#37328,#37329); +#37328 = CARTESIAN_POINT('',(-3.,-2.11,5.551115123126E-17)); +#37329 = VECTOR('',#37330,1.); +#37330 = DIRECTION('',(0.,0.,1.)); +#37331 = PCURVE('',#35481,#37332); +#37332 = DEFINITIONAL_REPRESENTATION('',(#37333),#37337); +#37333 = LINE('',#37334,#37335); +#37334 = CARTESIAN_POINT('',(-0.532659657565,-0.58421032799)); +#37335 = VECTOR('',#37336,1.); +#37336 = DIRECTION('',(1.,0.)); +#37337 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37338 = PCURVE('',#37339,#37344); +#37339 = PLANE('',#37340); +#37340 = AXIS2_PLACEMENT_3D('',#37341,#37342,#37343); +#37341 = CARTESIAN_POINT('',(-3.,-2.11,5.551115123126E-17)); +#37342 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#37343 = DIRECTION('',(0.,-0.,1.)); +#37344 = DEFINITIONAL_REPRESENTATION('',(#37345),#37349); +#37345 = LINE('',#37346,#37347); +#37346 = CARTESIAN_POINT('',(0.,0.)); +#37347 = VECTOR('',#37348,1.); +#37348 = DIRECTION('',(1.,0.)); +#37349 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37350 = ORIENTED_EDGE('',*,*,#37351,.T.); +#37351 = EDGE_CURVE('',#37324,#37352,#37354,.T.); +#37352 = VERTEX_POINT('',#37353); +#37353 = CARTESIAN_POINT('',(-2.65,-2.11,0.2)); +#37354 = SURFACE_CURVE('',#37355,(#37359,#37366),.PCURVE_S1.); +#37355 = LINE('',#37356,#37357); +#37356 = CARTESIAN_POINT('',(-3.,-2.11,0.2)); +#37357 = VECTOR('',#37358,1.); +#37358 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#37359 = PCURVE('',#35481,#37360); +#37360 = DEFINITIONAL_REPRESENTATION('',(#37361),#37365); +#37361 = LINE('',#37362,#37363); +#37362 = CARTESIAN_POINT('',(-0.332659657565,-0.58421032799)); +#37363 = VECTOR('',#37364,1.); +#37364 = DIRECTION('',(0.,1.)); +#37365 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37366 = PCURVE('',#37367,#37372); +#37367 = PLANE('',#37368); +#37368 = AXIS2_PLACEMENT_3D('',#37369,#37370,#37371); +#37369 = CARTESIAN_POINT('',(-3.,-2.11,0.2)); +#37370 = DIRECTION('',(-0.,0.,-1.)); +#37371 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#37372 = DEFINITIONAL_REPRESENTATION('',(#37373),#37377); +#37373 = LINE('',#37374,#37375); +#37374 = CARTESIAN_POINT('',(0.,0.)); +#37375 = VECTOR('',#37376,1.); +#37376 = DIRECTION('',(1.,0.)); +#37377 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37378 = ORIENTED_EDGE('',*,*,#37379,.T.); +#37379 = EDGE_CURVE('',#37352,#37380,#37382,.T.); +#37380 = VERTEX_POINT('',#37381); +#37381 = CARTESIAN_POINT('',(-2.55,-2.11,0.3)); +#37382 = SURFACE_CURVE('',#37383,(#37388,#37399),.PCURVE_S1.); +#37383 = CIRCLE('',#37384,0.1); +#37384 = AXIS2_PLACEMENT_3D('',#37385,#37386,#37387); +#37385 = CARTESIAN_POINT('',(-2.65,-2.11,0.3)); +#37386 = DIRECTION('',(9.95799250103E-17,-1.,-0.)); +#37387 = DIRECTION('',(-0.,0.,-1.)); +#37388 = PCURVE('',#35481,#37389); +#37389 = DEFINITIONAL_REPRESENTATION('',(#37390),#37398); +#37390 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#37391,#37392,#37393,#37394 + ,#37395,#37396,#37397),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#37391 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#37392 = CARTESIAN_POINT('',(-0.332659657565,-6.100524723311E-02)); +#37393 = CARTESIAN_POINT('',(-0.182659657565,-0.147607787612)); +#37394 = CARTESIAN_POINT('',(-3.2659657565E-02,-0.23421032799)); +#37395 = CARTESIAN_POINT('',(-0.182659657565,-0.320812868368)); +#37396 = CARTESIAN_POINT('',(-0.332659657565,-0.407415408747)); +#37397 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#37398 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37399 = PCURVE('',#37400,#37405); +#37400 = CYLINDRICAL_SURFACE('',#37401,0.1); +#37401 = AXIS2_PLACEMENT_3D('',#37402,#37403,#37404); +#37402 = CARTESIAN_POINT('',(-2.65,-2.11,0.3)); +#37403 = DIRECTION('',(9.95799250103E-17,-1.,0.)); +#37404 = DIRECTION('',(0.,-0.,-1.)); +#37405 = DEFINITIONAL_REPRESENTATION('',(#37406),#37410); +#37406 = LINE('',#37407,#37408); +#37407 = CARTESIAN_POINT('',(0.,0.)); +#37408 = VECTOR('',#37409,1.); +#37409 = DIRECTION('',(1.,0.)); +#37410 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37411 = ORIENTED_EDGE('',*,*,#37412,.T.); +#37412 = EDGE_CURVE('',#37380,#37413,#37415,.T.); +#37413 = VERTEX_POINT('',#37414); +#37414 = CARTESIAN_POINT('',(-2.55,-2.11,0.725)); +#37415 = SURFACE_CURVE('',#37416,(#37420,#37427),.PCURVE_S1.); +#37416 = LINE('',#37417,#37418); +#37417 = CARTESIAN_POINT('',(-2.55,-2.11,0.3)); +#37418 = VECTOR('',#37419,1.); +#37419 = DIRECTION('',(0.,0.,1.)); +#37420 = PCURVE('',#35481,#37421); +#37421 = DEFINITIONAL_REPRESENTATION('',(#37422),#37426); +#37422 = LINE('',#37423,#37424); +#37423 = CARTESIAN_POINT('',(-0.232659657565,-0.13421032799)); +#37424 = VECTOR('',#37425,1.); +#37425 = DIRECTION('',(1.,0.)); +#37426 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37427 = PCURVE('',#37428,#37433); +#37428 = PLANE('',#37429); +#37429 = AXIS2_PLACEMENT_3D('',#37430,#37431,#37432); +#37430 = CARTESIAN_POINT('',(-2.55,-2.11,0.3)); +#37431 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#37432 = DIRECTION('',(0.,-0.,1.)); +#37433 = DEFINITIONAL_REPRESENTATION('',(#37434),#37438); +#37434 = LINE('',#37435,#37436); +#37435 = CARTESIAN_POINT('',(0.,0.)); +#37436 = VECTOR('',#37437,1.); +#37437 = DIRECTION('',(1.,0.)); +#37438 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37439 = ORIENTED_EDGE('',*,*,#37440,.T.); +#37440 = EDGE_CURVE('',#37413,#37441,#37443,.T.); +#37441 = VERTEX_POINT('',#37442); +#37442 = CARTESIAN_POINT('',(-2.25,-2.11,1.025)); +#37443 = SURFACE_CURVE('',#37444,(#37449,#37456),.PCURVE_S1.); +#37444 = CIRCLE('',#37445,0.3); +#37445 = AXIS2_PLACEMENT_3D('',#37446,#37447,#37448); +#37446 = CARTESIAN_POINT('',(-2.25,-2.11,0.725)); +#37447 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#37448 = DIRECTION('',(-1.,-9.95799250103E-17,3.700743415417E-16)); +#37449 = PCURVE('',#35481,#37450); +#37450 = DEFINITIONAL_REPRESENTATION('',(#37451),#37455); +#37451 = CIRCLE('',#37452,0.3); +#37452 = AXIS2_PLACEMENT_2D('',#37453,#37454); +#37453 = CARTESIAN_POINT('',(0.192340342435,0.16578967201)); +#37454 = DIRECTION('',(3.700743415417E-16,-1.)); +#37455 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37456 = PCURVE('',#37457,#37462); +#37457 = CYLINDRICAL_SURFACE('',#37458,0.3); +#37458 = AXIS2_PLACEMENT_3D('',#37459,#37460,#37461); +#37459 = CARTESIAN_POINT('',(-2.25,-2.11,0.725)); +#37460 = DIRECTION('',(9.95799250103E-17,-1.,-0.)); +#37461 = DIRECTION('',(-1.,-9.95799250103E-17,3.700743415417E-16)); +#37462 = DEFINITIONAL_REPRESENTATION('',(#37463),#37467); +#37463 = LINE('',#37464,#37465); +#37464 = CARTESIAN_POINT('',(6.28318530718,0.)); +#37465 = VECTOR('',#37466,1.); +#37466 = DIRECTION('',(-1.,0.)); +#37467 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37468 = ORIENTED_EDGE('',*,*,#37469,.T.); +#37469 = EDGE_CURVE('',#37441,#35466,#37470,.T.); +#37470 = SURFACE_CURVE('',#37471,(#37475,#37482),.PCURVE_S1.); +#37471 = LINE('',#37472,#37473); +#37472 = CARTESIAN_POINT('',(-2.25,-2.11,1.025)); +#37473 = VECTOR('',#37474,1.); +#37474 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#37475 = PCURVE('',#35481,#37476); +#37476 = DEFINITIONAL_REPRESENTATION('',(#37477),#37481); +#37477 = LINE('',#37478,#37479); +#37478 = CARTESIAN_POINT('',(0.492340342435,0.16578967201)); +#37479 = VECTOR('',#37480,1.); +#37480 = DIRECTION('',(0.,1.)); +#37481 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37482 = PCURVE('',#36772,#37483); +#37483 = DEFINITIONAL_REPRESENTATION('',(#37484),#37488); +#37484 = LINE('',#37485,#37486); +#37485 = CARTESIAN_POINT('',(0.,0.)); +#37486 = VECTOR('',#37487,1.); +#37487 = DIRECTION('',(1.,0.)); +#37488 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37489 = ADVANCED_FACE('',(#37490),#35538,.T.); +#37490 = FACE_BOUND('',#37491,.T.); +#37491 = EDGE_LOOP('',(#37492,#37493,#37494,#37522,#37550,#37579,#37607, + #37635,#37663,#37696,#37724,#37753)); +#37492 = ORIENTED_EDGE('',*,*,#35522,.F.); +#37493 = ORIENTED_EDGE('',*,*,#35710,.T.); +#37494 = ORIENTED_EDGE('',*,*,#37495,.T.); +#37495 = EDGE_CURVE('',#35711,#37496,#37498,.T.); +#37496 = VERTEX_POINT('',#37497); +#37497 = CARTESIAN_POINT('',(-2.35,2.11,0.725)); +#37498 = SURFACE_CURVE('',#37499,(#37504,#37515),.PCURVE_S1.); +#37499 = CIRCLE('',#37500,0.1); +#37500 = AXIS2_PLACEMENT_3D('',#37501,#37502,#37503); +#37501 = CARTESIAN_POINT('',(-2.25,2.11,0.725)); +#37502 = DIRECTION('',(9.95799250103E-17,-1.,0.)); +#37503 = DIRECTION('',(-4.440892098501E-15,-4.422237021476E-31,1.)); +#37504 = PCURVE('',#35538,#37505); +#37505 = DEFINITIONAL_REPRESENTATION('',(#37506),#37514); +#37506 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#37507,#37508,#37509,#37510 + ,#37511,#37512,#37513),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#37507 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#37508 = CARTESIAN_POINT('',(0.292340342435,-7.415408746888E-03)); +#37509 = CARTESIAN_POINT('',(0.142340342435,7.918713163156E-02)); +#37510 = CARTESIAN_POINT('',(-7.659657565E-03,0.16578967201)); +#37511 = CARTESIAN_POINT('',(0.142340342435,0.252392212388)); +#37512 = CARTESIAN_POINT('',(0.292340342435,0.338994752767)); +#37513 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#37514 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37515 = PCURVE('',#35747,#37516); +#37516 = DEFINITIONAL_REPRESENTATION('',(#37517),#37521); +#37517 = LINE('',#37518,#37519); +#37518 = CARTESIAN_POINT('',(0.,-0.41)); +#37519 = VECTOR('',#37520,1.); +#37520 = DIRECTION('',(1.,0.)); +#37521 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37522 = ORIENTED_EDGE('',*,*,#37523,.T.); +#37523 = EDGE_CURVE('',#37496,#37524,#37526,.T.); +#37524 = VERTEX_POINT('',#37525); +#37525 = CARTESIAN_POINT('',(-2.35,2.11,0.3)); +#37526 = SURFACE_CURVE('',#37527,(#37531,#37538),.PCURVE_S1.); +#37527 = LINE('',#37528,#37529); +#37528 = CARTESIAN_POINT('',(-2.35,2.11,0.725)); +#37529 = VECTOR('',#37530,1.); +#37530 = DIRECTION('',(-1.044915787883E-15,-1.040526357994E-31,-1.)); +#37531 = PCURVE('',#35538,#37532); +#37532 = DEFINITIONAL_REPRESENTATION('',(#37533),#37537); +#37533 = LINE('',#37534,#37535); +#37534 = CARTESIAN_POINT('',(0.192340342435,6.578967201E-02)); +#37535 = VECTOR('',#37536,1.); +#37536 = DIRECTION('',(-1.,-1.044915787883E-15)); +#37537 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37538 = PCURVE('',#37539,#37544); +#37539 = PLANE('',#37540); +#37540 = AXIS2_PLACEMENT_3D('',#37541,#37542,#37543); +#37541 = CARTESIAN_POINT('',(-2.35,1.7,0.725)); +#37542 = DIRECTION('',(-1.,-9.95799250103E-17,1.044915787883E-15)); +#37543 = DIRECTION('',(-1.044915787883E-15,-1.040526357994E-31,-1.)); +#37544 = DEFINITIONAL_REPRESENTATION('',(#37545),#37549); +#37545 = LINE('',#37546,#37547); +#37546 = CARTESIAN_POINT('',(-4.266158067775E-32,-0.41)); +#37547 = VECTOR('',#37548,1.); +#37548 = DIRECTION('',(1.,0.)); +#37549 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37550 = ORIENTED_EDGE('',*,*,#37551,.T.); +#37551 = EDGE_CURVE('',#37524,#37552,#37554,.T.); +#37552 = VERTEX_POINT('',#37553); +#37553 = CARTESIAN_POINT('',(-2.65,2.11,5.551115123126E-17)); +#37554 = SURFACE_CURVE('',#37555,(#37560,#37567),.PCURVE_S1.); +#37555 = CIRCLE('',#37556,0.3); +#37556 = AXIS2_PLACEMENT_3D('',#37557,#37558,#37559); +#37557 = CARTESIAN_POINT('',(-2.65,2.11,0.3)); +#37558 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#37559 = DIRECTION('',(1.,9.95799250103E-17,3.515706244646E-15)); +#37560 = PCURVE('',#35538,#37561); +#37561 = DEFINITIONAL_REPRESENTATION('',(#37562),#37566); +#37562 = CIRCLE('',#37563,0.3); +#37563 = AXIS2_PLACEMENT_2D('',#37564,#37565); +#37564 = CARTESIAN_POINT('',(-0.232659657565,-0.23421032799)); +#37565 = DIRECTION('',(3.515706244646E-15,1.)); +#37566 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37567 = PCURVE('',#37568,#37573); +#37568 = CYLINDRICAL_SURFACE('',#37569,0.3); +#37569 = AXIS2_PLACEMENT_3D('',#37570,#37571,#37572); +#37570 = CARTESIAN_POINT('',(-2.65,1.7,0.3)); +#37571 = DIRECTION('',(9.95799250103E-17,-1.,-0.)); +#37572 = DIRECTION('',(1.,9.95799250103E-17,3.515706244646E-15)); +#37573 = DEFINITIONAL_REPRESENTATION('',(#37574),#37578); +#37574 = LINE('',#37575,#37576); +#37575 = CARTESIAN_POINT('',(6.28318530718,-0.41)); +#37576 = VECTOR('',#37577,1.); +#37577 = DIRECTION('',(-1.,0.)); +#37578 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37579 = ORIENTED_EDGE('',*,*,#37580,.T.); +#37580 = EDGE_CURVE('',#37552,#37581,#37583,.T.); +#37581 = VERTEX_POINT('',#37582); +#37582 = CARTESIAN_POINT('',(-3.,2.11,5.551115123126E-17)); +#37583 = SURFACE_CURVE('',#37584,(#37588,#37595),.PCURVE_S1.); +#37584 = LINE('',#37585,#37586); +#37585 = CARTESIAN_POINT('',(-2.65,2.11,5.551115123126E-17)); +#37586 = VECTOR('',#37587,1.); +#37587 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#37588 = PCURVE('',#35538,#37589); +#37589 = DEFINITIONAL_REPRESENTATION('',(#37590),#37594); +#37590 = LINE('',#37591,#37592); +#37591 = CARTESIAN_POINT('',(-0.532659657565,-0.23421032799)); +#37592 = VECTOR('',#37593,1.); +#37593 = DIRECTION('',(0.,-1.)); +#37594 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37595 = PCURVE('',#37596,#37601); +#37596 = PLANE('',#37597); +#37597 = AXIS2_PLACEMENT_3D('',#37598,#37599,#37600); +#37598 = CARTESIAN_POINT('',(-2.65,1.7,5.551115123126E-17)); +#37599 = DIRECTION('',(0.,0.,1.)); +#37600 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#37601 = DEFINITIONAL_REPRESENTATION('',(#37602),#37606); +#37602 = LINE('',#37603,#37604); +#37603 = CARTESIAN_POINT('',(-4.082776925422E-17,-0.41)); +#37604 = VECTOR('',#37605,1.); +#37605 = DIRECTION('',(1.,0.)); +#37606 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37607 = ORIENTED_EDGE('',*,*,#37608,.T.); +#37608 = EDGE_CURVE('',#37581,#37609,#37611,.T.); +#37609 = VERTEX_POINT('',#37610); +#37610 = CARTESIAN_POINT('',(-3.,2.11,0.2)); +#37611 = SURFACE_CURVE('',#37612,(#37616,#37623),.PCURVE_S1.); +#37612 = LINE('',#37613,#37614); +#37613 = CARTESIAN_POINT('',(-3.,2.11,5.551115123126E-17)); +#37614 = VECTOR('',#37615,1.); +#37615 = DIRECTION('',(0.,0.,1.)); +#37616 = PCURVE('',#35538,#37617); +#37617 = DEFINITIONAL_REPRESENTATION('',(#37618),#37622); +#37618 = LINE('',#37619,#37620); +#37619 = CARTESIAN_POINT('',(-0.532659657565,-0.58421032799)); +#37620 = VECTOR('',#37621,1.); +#37621 = DIRECTION('',(1.,0.)); +#37622 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37623 = PCURVE('',#37624,#37629); +#37624 = PLANE('',#37625); +#37625 = AXIS2_PLACEMENT_3D('',#37626,#37627,#37628); +#37626 = CARTESIAN_POINT('',(-3.,1.7,5.551115123126E-17)); +#37627 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#37628 = DIRECTION('',(0.,-0.,1.)); +#37629 = DEFINITIONAL_REPRESENTATION('',(#37630),#37634); +#37630 = LINE('',#37631,#37632); +#37631 = CARTESIAN_POINT('',(0.,-0.41)); +#37632 = VECTOR('',#37633,1.); +#37633 = DIRECTION('',(1.,0.)); +#37634 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37635 = ORIENTED_EDGE('',*,*,#37636,.T.); +#37636 = EDGE_CURVE('',#37609,#37637,#37639,.T.); +#37637 = VERTEX_POINT('',#37638); +#37638 = CARTESIAN_POINT('',(-2.65,2.11,0.2)); +#37639 = SURFACE_CURVE('',#37640,(#37644,#37651),.PCURVE_S1.); +#37640 = LINE('',#37641,#37642); +#37641 = CARTESIAN_POINT('',(-3.,2.11,0.2)); +#37642 = VECTOR('',#37643,1.); +#37643 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#37644 = PCURVE('',#35538,#37645); +#37645 = DEFINITIONAL_REPRESENTATION('',(#37646),#37650); +#37646 = LINE('',#37647,#37648); +#37647 = CARTESIAN_POINT('',(-0.332659657565,-0.58421032799)); +#37648 = VECTOR('',#37649,1.); +#37649 = DIRECTION('',(0.,1.)); +#37650 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37651 = PCURVE('',#37652,#37657); +#37652 = PLANE('',#37653); +#37653 = AXIS2_PLACEMENT_3D('',#37654,#37655,#37656); +#37654 = CARTESIAN_POINT('',(-3.,1.7,0.2)); +#37655 = DIRECTION('',(-0.,0.,-1.)); +#37656 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#37657 = DEFINITIONAL_REPRESENTATION('',(#37658),#37662); +#37658 = LINE('',#37659,#37660); +#37659 = CARTESIAN_POINT('',(4.082776925422E-17,-0.41)); +#37660 = VECTOR('',#37661,1.); +#37661 = DIRECTION('',(1.,0.)); +#37662 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37663 = ORIENTED_EDGE('',*,*,#37664,.T.); +#37664 = EDGE_CURVE('',#37637,#37665,#37667,.T.); +#37665 = VERTEX_POINT('',#37666); +#37666 = CARTESIAN_POINT('',(-2.55,2.11,0.3)); +#37667 = SURFACE_CURVE('',#37668,(#37673,#37684),.PCURVE_S1.); +#37668 = CIRCLE('',#37669,0.1); +#37669 = AXIS2_PLACEMENT_3D('',#37670,#37671,#37672); +#37670 = CARTESIAN_POINT('',(-2.65,2.11,0.3)); +#37671 = DIRECTION('',(9.95799250103E-17,-1.,-0.)); +#37672 = DIRECTION('',(-0.,0.,-1.)); +#37673 = PCURVE('',#35538,#37674); +#37674 = DEFINITIONAL_REPRESENTATION('',(#37675),#37683); +#37675 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#37676,#37677,#37678,#37679 + ,#37680,#37681,#37682),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#37676 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#37677 = CARTESIAN_POINT('',(-0.332659657565,-6.100524723311E-02)); +#37678 = CARTESIAN_POINT('',(-0.182659657565,-0.147607787612)); +#37679 = CARTESIAN_POINT('',(-3.2659657565E-02,-0.23421032799)); +#37680 = CARTESIAN_POINT('',(-0.182659657565,-0.320812868368)); +#37681 = CARTESIAN_POINT('',(-0.332659657565,-0.407415408747)); +#37682 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#37683 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37684 = PCURVE('',#37685,#37690); +#37685 = CYLINDRICAL_SURFACE('',#37686,0.1); +#37686 = AXIS2_PLACEMENT_3D('',#37687,#37688,#37689); +#37687 = CARTESIAN_POINT('',(-2.65,1.7,0.3)); +#37688 = DIRECTION('',(9.95799250103E-17,-1.,0.)); +#37689 = DIRECTION('',(0.,-0.,-1.)); +#37690 = DEFINITIONAL_REPRESENTATION('',(#37691),#37695); +#37691 = LINE('',#37692,#37693); +#37692 = CARTESIAN_POINT('',(0.,-0.41)); +#37693 = VECTOR('',#37694,1.); +#37694 = DIRECTION('',(1.,0.)); +#37695 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37696 = ORIENTED_EDGE('',*,*,#37697,.T.); +#37697 = EDGE_CURVE('',#37665,#37698,#37700,.T.); +#37698 = VERTEX_POINT('',#37699); +#37699 = CARTESIAN_POINT('',(-2.55,2.11,0.725)); +#37700 = SURFACE_CURVE('',#37701,(#37705,#37712),.PCURVE_S1.); +#37701 = LINE('',#37702,#37703); +#37702 = CARTESIAN_POINT('',(-2.55,2.11,0.3)); +#37703 = VECTOR('',#37704,1.); +#37704 = DIRECTION('',(0.,0.,1.)); +#37705 = PCURVE('',#35538,#37706); +#37706 = DEFINITIONAL_REPRESENTATION('',(#37707),#37711); +#37707 = LINE('',#37708,#37709); +#37708 = CARTESIAN_POINT('',(-0.232659657565,-0.13421032799)); +#37709 = VECTOR('',#37710,1.); +#37710 = DIRECTION('',(1.,0.)); +#37711 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37712 = PCURVE('',#37713,#37718); +#37713 = PLANE('',#37714); +#37714 = AXIS2_PLACEMENT_3D('',#37715,#37716,#37717); +#37715 = CARTESIAN_POINT('',(-2.55,1.7,0.3)); +#37716 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#37717 = DIRECTION('',(0.,-0.,1.)); +#37718 = DEFINITIONAL_REPRESENTATION('',(#37719),#37723); +#37719 = LINE('',#37720,#37721); +#37720 = CARTESIAN_POINT('',(0.,-0.41)); +#37721 = VECTOR('',#37722,1.); +#37722 = DIRECTION('',(1.,0.)); +#37723 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37724 = ORIENTED_EDGE('',*,*,#37725,.T.); +#37725 = EDGE_CURVE('',#37698,#37726,#37728,.T.); +#37726 = VERTEX_POINT('',#37727); +#37727 = CARTESIAN_POINT('',(-2.25,2.11,1.025)); +#37728 = SURFACE_CURVE('',#37729,(#37734,#37741),.PCURVE_S1.); +#37729 = CIRCLE('',#37730,0.3); +#37730 = AXIS2_PLACEMENT_3D('',#37731,#37732,#37733); +#37731 = CARTESIAN_POINT('',(-2.25,2.11,0.725)); +#37732 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#37733 = DIRECTION('',(-1.,-9.95799250103E-17,3.700743415417E-16)); +#37734 = PCURVE('',#35538,#37735); +#37735 = DEFINITIONAL_REPRESENTATION('',(#37736),#37740); +#37736 = CIRCLE('',#37737,0.3); +#37737 = AXIS2_PLACEMENT_2D('',#37738,#37739); +#37738 = CARTESIAN_POINT('',(0.192340342435,0.16578967201)); +#37739 = DIRECTION('',(3.700743415417E-16,-1.)); +#37740 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37741 = PCURVE('',#37742,#37747); +#37742 = CYLINDRICAL_SURFACE('',#37743,0.3); +#37743 = AXIS2_PLACEMENT_3D('',#37744,#37745,#37746); +#37744 = CARTESIAN_POINT('',(-2.25,1.7,0.725)); +#37745 = DIRECTION('',(9.95799250103E-17,-1.,-0.)); +#37746 = DIRECTION('',(-1.,-9.95799250103E-17,3.700743415417E-16)); +#37747 = DEFINITIONAL_REPRESENTATION('',(#37748),#37752); +#37748 = LINE('',#37749,#37750); +#37749 = CARTESIAN_POINT('',(6.28318530718,-0.41)); +#37750 = VECTOR('',#37751,1.); +#37751 = DIRECTION('',(-1.,0.)); +#37752 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37753 = ORIENTED_EDGE('',*,*,#37754,.T.); +#37754 = EDGE_CURVE('',#37726,#35523,#37755,.T.); +#37755 = SURFACE_CURVE('',#37756,(#37760,#37767),.PCURVE_S1.); +#37756 = LINE('',#37757,#37758); +#37757 = CARTESIAN_POINT('',(-2.25,2.11,1.025)); +#37758 = VECTOR('',#37759,1.); +#37759 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#37760 = PCURVE('',#35538,#37761); +#37761 = DEFINITIONAL_REPRESENTATION('',(#37762),#37766); +#37762 = LINE('',#37763,#37764); +#37763 = CARTESIAN_POINT('',(0.492340342435,0.16578967201)); +#37764 = VECTOR('',#37765,1.); +#37765 = DIRECTION('',(0.,1.)); +#37766 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37767 = PCURVE('',#36922,#37768); +#37768 = DEFINITIONAL_REPRESENTATION('',(#37769),#37773); +#37769 = LINE('',#37770,#37771); +#37770 = CARTESIAN_POINT('',(4.082776925422E-17,-0.41)); +#37771 = VECTOR('',#37772,1.); +#37772 = DIRECTION('',(1.,0.)); +#37773 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37774 = ADVANCED_FACE('',(#37775),#35585,.F.); +#37775 = FACE_BOUND('',#37776,.F.); +#37776 = EDGE_LOOP('',(#37777,#37820,#37821,#37841)); +#37777 = ORIENTED_EDGE('',*,*,#37778,.F.); +#37778 = EDGE_CURVE('',#35523,#36907,#37779,.T.); +#37779 = SURFACE_CURVE('',#37780,(#37784,#37813),.PCURVE_S1.); +#37780 = LINE('',#37781,#37782); +#37781 = CARTESIAN_POINT('',(-2.25,2.11,1.025)); +#37782 = VECTOR('',#37783,1.); +#37783 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#37784 = PCURVE('',#35585,#37785); +#37785 = DEFINITIONAL_REPRESENTATION('',(#37786),#37812); +#37786 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#37787,#37788,#37789,#37790, + #37791,#37792,#37793,#37794,#37795,#37796,#37797,#37798,#37799, + #37800,#37801,#37802,#37803,#37804,#37805,#37806,#37807,#37808, + #37809,#37810,#37811),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1 + ,1,1,1,1,1,1,1,1,1,1,4),(0.3,0.303409090909,0.306818181818, + 0.310227272727,0.313636363636,0.317045454545,0.320454545455, + 0.323863636364,0.327272727273,0.330681818182,0.334090909091,0.3375, + 0.340909090909,0.344318181818,0.347727272727,0.351136363636, + 0.354545454545,0.357954545455,0.361363636364,0.364772727273, + 0.368181818182,0.371590909091,0.375),.QUASI_UNIFORM_KNOTS.); +#37787 = CARTESIAN_POINT('',(4.385,0.)); +#37788 = CARTESIAN_POINT('',(4.385526973028,1.515151515152E-02)); +#37789 = CARTESIAN_POINT('',(4.38658170875,4.545454545455E-02)); +#37790 = CARTESIAN_POINT('',(4.388166186677,9.090909090909E-02)); +#37791 = CARTESIAN_POINT('',(4.389753044293,0.136363636364)); +#37792 = CARTESIAN_POINT('',(4.391342286965,0.181818181818)); +#37793 = CARTESIAN_POINT('',(4.392933920073,0.227272727273)); +#37794 = CARTESIAN_POINT('',(4.394527949014,0.272727272727)); +#37795 = CARTESIAN_POINT('',(4.396124379203,0.318181818182)); +#37796 = CARTESIAN_POINT('',(4.39772321607,0.363636363636)); +#37797 = CARTESIAN_POINT('',(4.39932446506,0.409090909091)); +#37798 = CARTESIAN_POINT('',(4.400928131636,0.454545454545)); +#37799 = CARTESIAN_POINT('',(4.402534221279,0.5)); +#37800 = CARTESIAN_POINT('',(4.404142739482,0.545454545455)); +#37801 = CARTESIAN_POINT('',(4.40575369176,0.590909090909)); +#37802 = CARTESIAN_POINT('',(4.407367083641,0.636363636364)); +#37803 = CARTESIAN_POINT('',(4.408982920672,0.681818181818)); +#37804 = CARTESIAN_POINT('',(4.410601208414,0.727272727273)); +#37805 = CARTESIAN_POINT('',(4.412221952448,0.772727272727)); +#37806 = CARTESIAN_POINT('',(4.41384515837,0.818181818182)); +#37807 = CARTESIAN_POINT('',(4.415470831794,0.863636363636)); +#37808 = CARTESIAN_POINT('',(4.417098978351,0.909090909091)); +#37809 = CARTESIAN_POINT('',(4.418729603687,0.954545454545)); +#37810 = CARTESIAN_POINT('',(4.419818343544,0.984848484848)); +#37811 = CARTESIAN_POINT('',(4.420363128492,1.)); +#37812 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37813 = PCURVE('',#36922,#37814); +#37814 = DEFINITIONAL_REPRESENTATION('',(#37815),#37819); +#37815 = LINE('',#37816,#37817); +#37816 = CARTESIAN_POINT('',(4.082776925422E-17,-0.41)); +#37817 = VECTOR('',#37818,1.); +#37818 = DIRECTION('',(1.,0.)); +#37819 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37820 = ORIENTED_EDGE('',*,*,#35571,.T.); +#37821 = ORIENTED_EDGE('',*,*,#37822,.T.); +#37822 = EDGE_CURVE('',#35552,#36686,#37823,.T.); +#37823 = SURFACE_CURVE('',#37824,(#37827,#37834),.PCURVE_S1.); +#37824 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#37825,#37826),.UNSPECIFIED., + .F.,.F.,(2,2),(0.,1.),.PIECEWISE_BEZIER_KNOTS.); +#37825 = CARTESIAN_POINT('',(-1.95,2.275,1.025)); +#37826 = CARTESIAN_POINT('',(-1.875,2.2375,1.025)); +#37827 = PCURVE('',#35585,#37828); +#37828 = DEFINITIONAL_REPRESENTATION('',(#37829),#37833); +#37829 = LINE('',#37830,#37831); +#37830 = CARTESIAN_POINT('',(4.55,6.640843479731E-16)); +#37831 = VECTOR('',#37832,1.); +#37832 = DIRECTION('',(-8.881784197001E-16,1.)); +#37833 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37834 = PCURVE('',#36178,#37835); +#37835 = DEFINITIONAL_REPRESENTATION('',(#37836),#37840); +#37836 = LINE('',#37837,#37838); +#37837 = CARTESIAN_POINT('',(2.508731586994E-16,-4.08400163074E-15)); +#37838 = VECTOR('',#37839,1.); +#37839 = DIRECTION('',(2.93758077062E-16,1.)); +#37840 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37841 = ORIENTED_EDGE('',*,*,#36934,.F.); +#37842 = ADVANCED_FACE('',(#37843),#35666,.F.); +#37843 = FACE_BOUND('',#37844,.F.); +#37844 = EDGE_LOOP('',(#37845,#37846,#37874,#37895)); +#37845 = ORIENTED_EDGE('',*,*,#35652,.T.); +#37846 = ORIENTED_EDGE('',*,*,#37847,.T.); +#37847 = EDGE_CURVE('',#35625,#37848,#37850,.T.); +#37848 = VERTEX_POINT('',#37849); +#37849 = CARTESIAN_POINT('',(-2.35,-1.7,0.725)); +#37850 = SURFACE_CURVE('',#37851,(#37856,#37863),.PCURVE_S1.); +#37851 = CIRCLE('',#37852,0.1); +#37852 = AXIS2_PLACEMENT_3D('',#37853,#37854,#37855); +#37853 = CARTESIAN_POINT('',(-2.25,-1.7,0.725)); +#37854 = DIRECTION('',(9.95799250103E-17,-1.,0.)); +#37855 = DIRECTION('',(-4.440892098501E-15,-4.422237021476E-31,1.)); +#37856 = PCURVE('',#35666,#37857); +#37857 = DEFINITIONAL_REPRESENTATION('',(#37858),#37862); +#37858 = LINE('',#37859,#37860); +#37859 = CARTESIAN_POINT('',(0.,-0.41)); +#37860 = VECTOR('',#37861,1.); +#37861 = DIRECTION('',(1.,0.)); +#37862 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37863 = PCURVE('',#35640,#37864); +#37864 = DEFINITIONAL_REPRESENTATION('',(#37865),#37873); +#37865 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#37866,#37867,#37868,#37869 + ,#37870,#37871,#37872),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#37866 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#37867 = CARTESIAN_POINT('',(0.292340342435,-7.415408746888E-03)); +#37868 = CARTESIAN_POINT('',(0.142340342435,7.918713163156E-02)); +#37869 = CARTESIAN_POINT('',(-7.659657565E-03,0.16578967201)); +#37870 = CARTESIAN_POINT('',(0.142340342435,0.252392212388)); +#37871 = CARTESIAN_POINT('',(0.292340342435,0.338994752767)); +#37872 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#37873 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37874 = ORIENTED_EDGE('',*,*,#37875,.F.); +#37875 = EDGE_CURVE('',#37211,#37848,#37876,.T.); +#37876 = SURFACE_CURVE('',#37877,(#37881,#37888),.PCURVE_S1.); +#37877 = LINE('',#37878,#37879); +#37878 = CARTESIAN_POINT('',(-2.35,-2.11,0.725)); +#37879 = VECTOR('',#37880,1.); +#37880 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#37881 = PCURVE('',#35666,#37882); +#37882 = DEFINITIONAL_REPRESENTATION('',(#37883),#37887); +#37883 = LINE('',#37884,#37885); +#37884 = CARTESIAN_POINT('',(1.570796326795,0.)); +#37885 = VECTOR('',#37886,1.); +#37886 = DIRECTION('',(0.,-1.)); +#37887 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37888 = PCURVE('',#37254,#37889); +#37889 = DEFINITIONAL_REPRESENTATION('',(#37890),#37894); +#37890 = LINE('',#37891,#37892); +#37891 = CARTESIAN_POINT('',(-0.,0.)); +#37892 = VECTOR('',#37893,1.); +#37893 = DIRECTION('',(6.767833676919E-44,-1.)); +#37894 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37895 = ORIENTED_EDGE('',*,*,#37210,.F.); +#37896 = ADVANCED_FACE('',(#37897),#35640,.T.); +#37897 = FACE_BOUND('',#37898,.T.); +#37898 = EDGE_LOOP('',(#37899,#37900,#37901,#37902,#37925,#37949,#37972, + #37995,#38018,#38046,#38069,#38093)); +#37899 = ORIENTED_EDGE('',*,*,#35762,.F.); +#37900 = ORIENTED_EDGE('',*,*,#35624,.T.); +#37901 = ORIENTED_EDGE('',*,*,#37847,.T.); +#37902 = ORIENTED_EDGE('',*,*,#37903,.T.); +#37903 = EDGE_CURVE('',#37848,#37904,#37906,.T.); +#37904 = VERTEX_POINT('',#37905); +#37905 = CARTESIAN_POINT('',(-2.35,-1.7,0.3)); +#37906 = SURFACE_CURVE('',#37907,(#37911,#37918),.PCURVE_S1.); +#37907 = LINE('',#37908,#37909); +#37908 = CARTESIAN_POINT('',(-2.35,-1.7,0.725)); +#37909 = VECTOR('',#37910,1.); +#37910 = DIRECTION('',(-1.044915787883E-15,-1.040526357994E-31,-1.)); +#37911 = PCURVE('',#35640,#37912); +#37912 = DEFINITIONAL_REPRESENTATION('',(#37913),#37917); +#37913 = LINE('',#37914,#37915); +#37914 = CARTESIAN_POINT('',(0.192340342435,6.578967201E-02)); +#37915 = VECTOR('',#37916,1.); +#37916 = DIRECTION('',(-1.,-1.044915787883E-15)); +#37917 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37918 = PCURVE('',#37254,#37919); +#37919 = DEFINITIONAL_REPRESENTATION('',(#37920),#37924); +#37920 = LINE('',#37921,#37922); +#37921 = CARTESIAN_POINT('',(-4.266158067775E-32,-0.41)); +#37922 = VECTOR('',#37923,1.); +#37923 = DIRECTION('',(1.,0.)); +#37924 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37925 = ORIENTED_EDGE('',*,*,#37926,.T.); +#37926 = EDGE_CURVE('',#37904,#37927,#37929,.T.); +#37927 = VERTEX_POINT('',#37928); +#37928 = CARTESIAN_POINT('',(-2.65,-1.7,5.551115123126E-17)); +#37929 = SURFACE_CURVE('',#37930,(#37935,#37942),.PCURVE_S1.); +#37930 = CIRCLE('',#37931,0.3); +#37931 = AXIS2_PLACEMENT_3D('',#37932,#37933,#37934); +#37932 = CARTESIAN_POINT('',(-2.65,-1.7,0.3)); +#37933 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#37934 = DIRECTION('',(1.,9.95799250103E-17,3.515706244646E-15)); +#37935 = PCURVE('',#35640,#37936); +#37936 = DEFINITIONAL_REPRESENTATION('',(#37937),#37941); +#37937 = CIRCLE('',#37938,0.3); +#37938 = AXIS2_PLACEMENT_2D('',#37939,#37940); +#37939 = CARTESIAN_POINT('',(-0.232659657565,-0.23421032799)); +#37940 = DIRECTION('',(3.515706244646E-15,1.)); +#37941 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37942 = PCURVE('',#37283,#37943); +#37943 = DEFINITIONAL_REPRESENTATION('',(#37944),#37948); +#37944 = LINE('',#37945,#37946); +#37945 = CARTESIAN_POINT('',(6.28318530718,-0.41)); +#37946 = VECTOR('',#37947,1.); +#37947 = DIRECTION('',(-1.,0.)); +#37948 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37949 = ORIENTED_EDGE('',*,*,#37950,.T.); +#37950 = EDGE_CURVE('',#37927,#37951,#37953,.T.); +#37951 = VERTEX_POINT('',#37952); +#37952 = CARTESIAN_POINT('',(-3.,-1.7,5.551115123126E-17)); +#37953 = SURFACE_CURVE('',#37954,(#37958,#37965),.PCURVE_S1.); +#37954 = LINE('',#37955,#37956); +#37955 = CARTESIAN_POINT('',(-2.65,-1.7,5.551115123126E-17)); +#37956 = VECTOR('',#37957,1.); +#37957 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#37958 = PCURVE('',#35640,#37959); +#37959 = DEFINITIONAL_REPRESENTATION('',(#37960),#37964); +#37960 = LINE('',#37961,#37962); +#37961 = CARTESIAN_POINT('',(-0.532659657565,-0.23421032799)); +#37962 = VECTOR('',#37963,1.); +#37963 = DIRECTION('',(0.,-1.)); +#37964 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37965 = PCURVE('',#37311,#37966); +#37966 = DEFINITIONAL_REPRESENTATION('',(#37967),#37971); +#37967 = LINE('',#37968,#37969); +#37968 = CARTESIAN_POINT('',(-4.082776925422E-17,-0.41)); +#37969 = VECTOR('',#37970,1.); +#37970 = DIRECTION('',(1.,0.)); +#37971 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37972 = ORIENTED_EDGE('',*,*,#37973,.T.); +#37973 = EDGE_CURVE('',#37951,#37974,#37976,.T.); +#37974 = VERTEX_POINT('',#37975); +#37975 = CARTESIAN_POINT('',(-3.,-1.7,0.2)); +#37976 = SURFACE_CURVE('',#37977,(#37981,#37988),.PCURVE_S1.); +#37977 = LINE('',#37978,#37979); +#37978 = CARTESIAN_POINT('',(-3.,-1.7,5.551115123126E-17)); +#37979 = VECTOR('',#37980,1.); +#37980 = DIRECTION('',(0.,0.,1.)); +#37981 = PCURVE('',#35640,#37982); +#37982 = DEFINITIONAL_REPRESENTATION('',(#37983),#37987); +#37983 = LINE('',#37984,#37985); +#37984 = CARTESIAN_POINT('',(-0.532659657565,-0.58421032799)); +#37985 = VECTOR('',#37986,1.); +#37986 = DIRECTION('',(1.,0.)); +#37987 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37988 = PCURVE('',#37339,#37989); +#37989 = DEFINITIONAL_REPRESENTATION('',(#37990),#37994); +#37990 = LINE('',#37991,#37992); +#37991 = CARTESIAN_POINT('',(0.,-0.41)); +#37992 = VECTOR('',#37993,1.); +#37993 = DIRECTION('',(1.,0.)); +#37994 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#37995 = ORIENTED_EDGE('',*,*,#37996,.T.); +#37996 = EDGE_CURVE('',#37974,#37997,#37999,.T.); +#37997 = VERTEX_POINT('',#37998); +#37998 = CARTESIAN_POINT('',(-2.65,-1.7,0.2)); +#37999 = SURFACE_CURVE('',#38000,(#38004,#38011),.PCURVE_S1.); +#38000 = LINE('',#38001,#38002); +#38001 = CARTESIAN_POINT('',(-3.,-1.7,0.2)); +#38002 = VECTOR('',#38003,1.); +#38003 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#38004 = PCURVE('',#35640,#38005); +#38005 = DEFINITIONAL_REPRESENTATION('',(#38006),#38010); +#38006 = LINE('',#38007,#38008); +#38007 = CARTESIAN_POINT('',(-0.332659657565,-0.58421032799)); +#38008 = VECTOR('',#38009,1.); +#38009 = DIRECTION('',(0.,1.)); +#38010 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38011 = PCURVE('',#37367,#38012); +#38012 = DEFINITIONAL_REPRESENTATION('',(#38013),#38017); +#38013 = LINE('',#38014,#38015); +#38014 = CARTESIAN_POINT('',(4.082776925422E-17,-0.41)); +#38015 = VECTOR('',#38016,1.); +#38016 = DIRECTION('',(1.,0.)); +#38017 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38018 = ORIENTED_EDGE('',*,*,#38019,.T.); +#38019 = EDGE_CURVE('',#37997,#38020,#38022,.T.); +#38020 = VERTEX_POINT('',#38021); +#38021 = CARTESIAN_POINT('',(-2.55,-1.7,0.3)); +#38022 = SURFACE_CURVE('',#38023,(#38028,#38039),.PCURVE_S1.); +#38023 = CIRCLE('',#38024,0.1); +#38024 = AXIS2_PLACEMENT_3D('',#38025,#38026,#38027); +#38025 = CARTESIAN_POINT('',(-2.65,-1.7,0.3)); +#38026 = DIRECTION('',(9.95799250103E-17,-1.,-0.)); +#38027 = DIRECTION('',(-0.,0.,-1.)); +#38028 = PCURVE('',#35640,#38029); +#38029 = DEFINITIONAL_REPRESENTATION('',(#38030),#38038); +#38030 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#38031,#38032,#38033,#38034 + ,#38035,#38036,#38037),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#38031 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#38032 = CARTESIAN_POINT('',(-0.332659657565,-6.100524723311E-02)); +#38033 = CARTESIAN_POINT('',(-0.182659657565,-0.147607787612)); +#38034 = CARTESIAN_POINT('',(-3.2659657565E-02,-0.23421032799)); +#38035 = CARTESIAN_POINT('',(-0.182659657565,-0.320812868368)); +#38036 = CARTESIAN_POINT('',(-0.332659657565,-0.407415408747)); +#38037 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#38038 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38039 = PCURVE('',#37400,#38040); +#38040 = DEFINITIONAL_REPRESENTATION('',(#38041),#38045); +#38041 = LINE('',#38042,#38043); +#38042 = CARTESIAN_POINT('',(0.,-0.41)); +#38043 = VECTOR('',#38044,1.); +#38044 = DIRECTION('',(1.,0.)); +#38045 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38046 = ORIENTED_EDGE('',*,*,#38047,.T.); +#38047 = EDGE_CURVE('',#38020,#38048,#38050,.T.); +#38048 = VERTEX_POINT('',#38049); +#38049 = CARTESIAN_POINT('',(-2.55,-1.7,0.725)); +#38050 = SURFACE_CURVE('',#38051,(#38055,#38062),.PCURVE_S1.); +#38051 = LINE('',#38052,#38053); +#38052 = CARTESIAN_POINT('',(-2.55,-1.7,0.3)); +#38053 = VECTOR('',#38054,1.); +#38054 = DIRECTION('',(0.,0.,1.)); +#38055 = PCURVE('',#35640,#38056); +#38056 = DEFINITIONAL_REPRESENTATION('',(#38057),#38061); +#38057 = LINE('',#38058,#38059); +#38058 = CARTESIAN_POINT('',(-0.232659657565,-0.13421032799)); +#38059 = VECTOR('',#38060,1.); +#38060 = DIRECTION('',(1.,0.)); +#38061 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38062 = PCURVE('',#37428,#38063); +#38063 = DEFINITIONAL_REPRESENTATION('',(#38064),#38068); +#38064 = LINE('',#38065,#38066); +#38065 = CARTESIAN_POINT('',(0.,-0.41)); +#38066 = VECTOR('',#38067,1.); +#38067 = DIRECTION('',(1.,0.)); +#38068 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38069 = ORIENTED_EDGE('',*,*,#38070,.T.); +#38070 = EDGE_CURVE('',#38048,#38071,#38073,.T.); +#38071 = VERTEX_POINT('',#38072); +#38072 = CARTESIAN_POINT('',(-2.25,-1.7,1.025)); +#38073 = SURFACE_CURVE('',#38074,(#38079,#38086),.PCURVE_S1.); +#38074 = CIRCLE('',#38075,0.3); +#38075 = AXIS2_PLACEMENT_3D('',#38076,#38077,#38078); +#38076 = CARTESIAN_POINT('',(-2.25,-1.7,0.725)); +#38077 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#38078 = DIRECTION('',(-1.,-9.95799250103E-17,3.700743415417E-16)); +#38079 = PCURVE('',#35640,#38080); +#38080 = DEFINITIONAL_REPRESENTATION('',(#38081),#38085); +#38081 = CIRCLE('',#38082,0.3); +#38082 = AXIS2_PLACEMENT_2D('',#38083,#38084); +#38083 = CARTESIAN_POINT('',(0.192340342435,0.16578967201)); +#38084 = DIRECTION('',(3.700743415417E-16,-1.)); +#38085 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38086 = PCURVE('',#37457,#38087); +#38087 = DEFINITIONAL_REPRESENTATION('',(#38088),#38092); +#38088 = LINE('',#38089,#38090); +#38089 = CARTESIAN_POINT('',(6.28318530718,-0.41)); +#38090 = VECTOR('',#38091,1.); +#38091 = DIRECTION('',(-1.,0.)); +#38092 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38093 = ORIENTED_EDGE('',*,*,#38094,.T.); +#38094 = EDGE_CURVE('',#38071,#35763,#38095,.T.); +#38095 = SURFACE_CURVE('',#38096,(#38100,#38107),.PCURVE_S1.); +#38096 = LINE('',#38097,#38098); +#38097 = CARTESIAN_POINT('',(-2.25,-1.7,1.025)); +#38098 = VECTOR('',#38099,1.); +#38099 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#38100 = PCURVE('',#35640,#38101); +#38101 = DEFINITIONAL_REPRESENTATION('',(#38102),#38106); +#38102 = LINE('',#38103,#38104); +#38103 = CARTESIAN_POINT('',(0.492340342435,0.16578967201)); +#38104 = VECTOR('',#38105,1.); +#38105 = DIRECTION('',(0.,1.)); +#38106 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38107 = PCURVE('',#36772,#38108); +#38108 = DEFINITIONAL_REPRESENTATION('',(#38109),#38113); +#38109 = LINE('',#38110,#38111); +#38110 = CARTESIAN_POINT('',(4.082776925422E-17,-0.41)); +#38111 = VECTOR('',#38112,1.); +#38112 = DIRECTION('',(1.,0.)); +#38113 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38114 = ADVANCED_FACE('',(#38115),#35697,.F.); +#38115 = FACE_BOUND('',#38116,.F.); +#38116 = EDGE_LOOP('',(#38117,#38118,#38119,#38147,#38170,#38194,#38217, + #38240,#38263,#38291,#38314,#38338)); +#38117 = ORIENTED_EDGE('',*,*,#35872,.F.); +#38118 = ORIENTED_EDGE('',*,*,#35681,.T.); +#38119 = ORIENTED_EDGE('',*,*,#38120,.T.); +#38120 = EDGE_CURVE('',#35682,#38121,#38123,.T.); +#38121 = VERTEX_POINT('',#38122); +#38122 = CARTESIAN_POINT('',(-2.35,1.7,0.725)); +#38123 = SURFACE_CURVE('',#38124,(#38129,#38140),.PCURVE_S1.); +#38124 = CIRCLE('',#38125,0.1); +#38125 = AXIS2_PLACEMENT_3D('',#38126,#38127,#38128); +#38126 = CARTESIAN_POINT('',(-2.25,1.7,0.725)); +#38127 = DIRECTION('',(9.95799250103E-17,-1.,0.)); +#38128 = DIRECTION('',(-4.440892098501E-15,-4.422237021476E-31,1.)); +#38129 = PCURVE('',#35697,#38130); +#38130 = DEFINITIONAL_REPRESENTATION('',(#38131),#38139); +#38131 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#38132,#38133,#38134,#38135 + ,#38136,#38137,#38138),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#38132 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#38133 = CARTESIAN_POINT('',(0.292340342435,-7.415408746888E-03)); +#38134 = CARTESIAN_POINT('',(0.142340342435,7.918713163156E-02)); +#38135 = CARTESIAN_POINT('',(-7.659657565E-03,0.16578967201)); +#38136 = CARTESIAN_POINT('',(0.142340342435,0.252392212388)); +#38137 = CARTESIAN_POINT('',(0.292340342435,0.338994752767)); +#38138 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#38139 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38140 = PCURVE('',#35747,#38141); +#38141 = DEFINITIONAL_REPRESENTATION('',(#38142),#38146); +#38142 = LINE('',#38143,#38144); +#38143 = CARTESIAN_POINT('',(0.,0.)); +#38144 = VECTOR('',#38145,1.); +#38145 = DIRECTION('',(1.,0.)); +#38146 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38147 = ORIENTED_EDGE('',*,*,#38148,.T.); +#38148 = EDGE_CURVE('',#38121,#38149,#38151,.T.); +#38149 = VERTEX_POINT('',#38150); +#38150 = CARTESIAN_POINT('',(-2.35,1.7,0.3)); +#38151 = SURFACE_CURVE('',#38152,(#38156,#38163),.PCURVE_S1.); +#38152 = LINE('',#38153,#38154); +#38153 = CARTESIAN_POINT('',(-2.35,1.7,0.725)); +#38154 = VECTOR('',#38155,1.); +#38155 = DIRECTION('',(-1.044915787883E-15,-1.040526357994E-31,-1.)); +#38156 = PCURVE('',#35697,#38157); +#38157 = DEFINITIONAL_REPRESENTATION('',(#38158),#38162); +#38158 = LINE('',#38159,#38160); +#38159 = CARTESIAN_POINT('',(0.192340342435,6.578967201E-02)); +#38160 = VECTOR('',#38161,1.); +#38161 = DIRECTION('',(-1.,-1.044915787883E-15)); +#38162 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38163 = PCURVE('',#37539,#38164); +#38164 = DEFINITIONAL_REPRESENTATION('',(#38165),#38169); +#38165 = LINE('',#38166,#38167); +#38166 = CARTESIAN_POINT('',(-0.,0.)); +#38167 = VECTOR('',#38168,1.); +#38168 = DIRECTION('',(1.,0.)); +#38169 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38170 = ORIENTED_EDGE('',*,*,#38171,.T.); +#38171 = EDGE_CURVE('',#38149,#38172,#38174,.T.); +#38172 = VERTEX_POINT('',#38173); +#38173 = CARTESIAN_POINT('',(-2.65,1.7,5.551115123126E-17)); +#38174 = SURFACE_CURVE('',#38175,(#38180,#38187),.PCURVE_S1.); +#38175 = CIRCLE('',#38176,0.3); +#38176 = AXIS2_PLACEMENT_3D('',#38177,#38178,#38179); +#38177 = CARTESIAN_POINT('',(-2.65,1.7,0.3)); +#38178 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#38179 = DIRECTION('',(1.,9.95799250103E-17,3.515706244646E-15)); +#38180 = PCURVE('',#35697,#38181); +#38181 = DEFINITIONAL_REPRESENTATION('',(#38182),#38186); +#38182 = CIRCLE('',#38183,0.3); +#38183 = AXIS2_PLACEMENT_2D('',#38184,#38185); +#38184 = CARTESIAN_POINT('',(-0.232659657565,-0.23421032799)); +#38185 = DIRECTION('',(3.515706244646E-15,1.)); +#38186 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38187 = PCURVE('',#37568,#38188); +#38188 = DEFINITIONAL_REPRESENTATION('',(#38189),#38193); +#38189 = LINE('',#38190,#38191); +#38190 = CARTESIAN_POINT('',(6.28318530718,0.)); +#38191 = VECTOR('',#38192,1.); +#38192 = DIRECTION('',(-1.,0.)); +#38193 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38194 = ORIENTED_EDGE('',*,*,#38195,.T.); +#38195 = EDGE_CURVE('',#38172,#38196,#38198,.T.); +#38196 = VERTEX_POINT('',#38197); +#38197 = CARTESIAN_POINT('',(-3.,1.7,5.551115123126E-17)); +#38198 = SURFACE_CURVE('',#38199,(#38203,#38210),.PCURVE_S1.); +#38199 = LINE('',#38200,#38201); +#38200 = CARTESIAN_POINT('',(-2.65,1.7,5.551115123126E-17)); +#38201 = VECTOR('',#38202,1.); +#38202 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#38203 = PCURVE('',#35697,#38204); +#38204 = DEFINITIONAL_REPRESENTATION('',(#38205),#38209); +#38205 = LINE('',#38206,#38207); +#38206 = CARTESIAN_POINT('',(-0.532659657565,-0.23421032799)); +#38207 = VECTOR('',#38208,1.); +#38208 = DIRECTION('',(0.,-1.)); +#38209 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38210 = PCURVE('',#37596,#38211); +#38211 = DEFINITIONAL_REPRESENTATION('',(#38212),#38216); +#38212 = LINE('',#38213,#38214); +#38213 = CARTESIAN_POINT('',(0.,0.)); +#38214 = VECTOR('',#38215,1.); +#38215 = DIRECTION('',(1.,0.)); +#38216 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38217 = ORIENTED_EDGE('',*,*,#38218,.T.); +#38218 = EDGE_CURVE('',#38196,#38219,#38221,.T.); +#38219 = VERTEX_POINT('',#38220); +#38220 = CARTESIAN_POINT('',(-3.,1.7,0.2)); +#38221 = SURFACE_CURVE('',#38222,(#38226,#38233),.PCURVE_S1.); +#38222 = LINE('',#38223,#38224); +#38223 = CARTESIAN_POINT('',(-3.,1.7,5.551115123126E-17)); +#38224 = VECTOR('',#38225,1.); +#38225 = DIRECTION('',(0.,0.,1.)); +#38226 = PCURVE('',#35697,#38227); +#38227 = DEFINITIONAL_REPRESENTATION('',(#38228),#38232); +#38228 = LINE('',#38229,#38230); +#38229 = CARTESIAN_POINT('',(-0.532659657565,-0.58421032799)); +#38230 = VECTOR('',#38231,1.); +#38231 = DIRECTION('',(1.,0.)); +#38232 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38233 = PCURVE('',#37624,#38234); +#38234 = DEFINITIONAL_REPRESENTATION('',(#38235),#38239); +#38235 = LINE('',#38236,#38237); +#38236 = CARTESIAN_POINT('',(0.,0.)); +#38237 = VECTOR('',#38238,1.); +#38238 = DIRECTION('',(1.,0.)); +#38239 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38240 = ORIENTED_EDGE('',*,*,#38241,.T.); +#38241 = EDGE_CURVE('',#38219,#38242,#38244,.T.); +#38242 = VERTEX_POINT('',#38243); +#38243 = CARTESIAN_POINT('',(-2.65,1.7,0.2)); +#38244 = SURFACE_CURVE('',#38245,(#38249,#38256),.PCURVE_S1.); +#38245 = LINE('',#38246,#38247); +#38246 = CARTESIAN_POINT('',(-3.,1.7,0.2)); +#38247 = VECTOR('',#38248,1.); +#38248 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#38249 = PCURVE('',#35697,#38250); +#38250 = DEFINITIONAL_REPRESENTATION('',(#38251),#38255); +#38251 = LINE('',#38252,#38253); +#38252 = CARTESIAN_POINT('',(-0.332659657565,-0.58421032799)); +#38253 = VECTOR('',#38254,1.); +#38254 = DIRECTION('',(0.,1.)); +#38255 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38256 = PCURVE('',#37652,#38257); +#38257 = DEFINITIONAL_REPRESENTATION('',(#38258),#38262); +#38258 = LINE('',#38259,#38260); +#38259 = CARTESIAN_POINT('',(0.,0.)); +#38260 = VECTOR('',#38261,1.); +#38261 = DIRECTION('',(1.,0.)); +#38262 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38263 = ORIENTED_EDGE('',*,*,#38264,.T.); +#38264 = EDGE_CURVE('',#38242,#38265,#38267,.T.); +#38265 = VERTEX_POINT('',#38266); +#38266 = CARTESIAN_POINT('',(-2.55,1.7,0.3)); +#38267 = SURFACE_CURVE('',#38268,(#38273,#38284),.PCURVE_S1.); +#38268 = CIRCLE('',#38269,0.1); +#38269 = AXIS2_PLACEMENT_3D('',#38270,#38271,#38272); +#38270 = CARTESIAN_POINT('',(-2.65,1.7,0.3)); +#38271 = DIRECTION('',(9.95799250103E-17,-1.,-0.)); +#38272 = DIRECTION('',(-0.,0.,-1.)); +#38273 = PCURVE('',#35697,#38274); +#38274 = DEFINITIONAL_REPRESENTATION('',(#38275),#38283); +#38275 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#38276,#38277,#38278,#38279 + ,#38280,#38281,#38282),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#38276 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#38277 = CARTESIAN_POINT('',(-0.332659657565,-6.100524723311E-02)); +#38278 = CARTESIAN_POINT('',(-0.182659657565,-0.147607787612)); +#38279 = CARTESIAN_POINT('',(-3.2659657565E-02,-0.23421032799)); +#38280 = CARTESIAN_POINT('',(-0.182659657565,-0.320812868368)); +#38281 = CARTESIAN_POINT('',(-0.332659657565,-0.407415408747)); +#38282 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#38283 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38284 = PCURVE('',#37685,#38285); +#38285 = DEFINITIONAL_REPRESENTATION('',(#38286),#38290); +#38286 = LINE('',#38287,#38288); +#38287 = CARTESIAN_POINT('',(0.,0.)); +#38288 = VECTOR('',#38289,1.); +#38289 = DIRECTION('',(1.,0.)); +#38290 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38291 = ORIENTED_EDGE('',*,*,#38292,.T.); +#38292 = EDGE_CURVE('',#38265,#38293,#38295,.T.); +#38293 = VERTEX_POINT('',#38294); +#38294 = CARTESIAN_POINT('',(-2.55,1.7,0.725)); +#38295 = SURFACE_CURVE('',#38296,(#38300,#38307),.PCURVE_S1.); +#38296 = LINE('',#38297,#38298); +#38297 = CARTESIAN_POINT('',(-2.55,1.7,0.3)); +#38298 = VECTOR('',#38299,1.); +#38299 = DIRECTION('',(0.,0.,1.)); +#38300 = PCURVE('',#35697,#38301); +#38301 = DEFINITIONAL_REPRESENTATION('',(#38302),#38306); +#38302 = LINE('',#38303,#38304); +#38303 = CARTESIAN_POINT('',(-0.232659657565,-0.13421032799)); +#38304 = VECTOR('',#38305,1.); +#38305 = DIRECTION('',(1.,0.)); +#38306 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38307 = PCURVE('',#37713,#38308); +#38308 = DEFINITIONAL_REPRESENTATION('',(#38309),#38313); +#38309 = LINE('',#38310,#38311); +#38310 = CARTESIAN_POINT('',(0.,0.)); +#38311 = VECTOR('',#38312,1.); +#38312 = DIRECTION('',(1.,0.)); +#38313 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38314 = ORIENTED_EDGE('',*,*,#38315,.T.); +#38315 = EDGE_CURVE('',#38293,#38316,#38318,.T.); +#38316 = VERTEX_POINT('',#38317); +#38317 = CARTESIAN_POINT('',(-2.25,1.7,1.025)); +#38318 = SURFACE_CURVE('',#38319,(#38324,#38331),.PCURVE_S1.); +#38319 = CIRCLE('',#38320,0.3); +#38320 = AXIS2_PLACEMENT_3D('',#38321,#38322,#38323); +#38321 = CARTESIAN_POINT('',(-2.25,1.7,0.725)); +#38322 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#38323 = DIRECTION('',(-1.,-9.95799250103E-17,3.700743415417E-16)); +#38324 = PCURVE('',#35697,#38325); +#38325 = DEFINITIONAL_REPRESENTATION('',(#38326),#38330); +#38326 = CIRCLE('',#38327,0.3); +#38327 = AXIS2_PLACEMENT_2D('',#38328,#38329); +#38328 = CARTESIAN_POINT('',(0.192340342435,0.16578967201)); +#38329 = DIRECTION('',(3.700743415417E-16,-1.)); +#38330 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38331 = PCURVE('',#37742,#38332); +#38332 = DEFINITIONAL_REPRESENTATION('',(#38333),#38337); +#38333 = LINE('',#38334,#38335); +#38334 = CARTESIAN_POINT('',(6.28318530718,0.)); +#38335 = VECTOR('',#38336,1.); +#38336 = DIRECTION('',(-1.,0.)); +#38337 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38338 = ORIENTED_EDGE('',*,*,#38339,.T.); +#38339 = EDGE_CURVE('',#38316,#35873,#38340,.T.); +#38340 = SURFACE_CURVE('',#38341,(#38345,#38352),.PCURVE_S1.); +#38341 = LINE('',#38342,#38343); +#38342 = CARTESIAN_POINT('',(-2.25,1.7,1.025)); +#38343 = VECTOR('',#38344,1.); +#38344 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#38345 = PCURVE('',#35697,#38346); +#38346 = DEFINITIONAL_REPRESENTATION('',(#38347),#38351); +#38347 = LINE('',#38348,#38349); +#38348 = CARTESIAN_POINT('',(0.492340342435,0.16578967201)); +#38349 = VECTOR('',#38350,1.); +#38350 = DIRECTION('',(0.,1.)); +#38351 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38352 = PCURVE('',#36922,#38353); +#38353 = DEFINITIONAL_REPRESENTATION('',(#38354),#38358); +#38354 = LINE('',#38355,#38356); +#38355 = CARTESIAN_POINT('',(0.,0.)); +#38356 = VECTOR('',#38357,1.); +#38357 = DIRECTION('',(1.,0.)); +#38358 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38359 = ADVANCED_FACE('',(#38360),#35747,.F.); +#38360 = FACE_BOUND('',#38361,.F.); +#38361 = EDGE_LOOP('',(#38362,#38363,#38364,#38385)); +#38362 = ORIENTED_EDGE('',*,*,#35733,.T.); +#38363 = ORIENTED_EDGE('',*,*,#37495,.T.); +#38364 = ORIENTED_EDGE('',*,*,#38365,.F.); +#38365 = EDGE_CURVE('',#38121,#37496,#38366,.T.); +#38366 = SURFACE_CURVE('',#38367,(#38371,#38378),.PCURVE_S1.); +#38367 = LINE('',#38368,#38369); +#38368 = CARTESIAN_POINT('',(-2.35,1.7,0.725)); +#38369 = VECTOR('',#38370,1.); +#38370 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#38371 = PCURVE('',#35747,#38372); +#38372 = DEFINITIONAL_REPRESENTATION('',(#38373),#38377); +#38373 = LINE('',#38374,#38375); +#38374 = CARTESIAN_POINT('',(1.570796326795,0.)); +#38375 = VECTOR('',#38376,1.); +#38376 = DIRECTION('',(0.,-1.)); +#38377 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38378 = PCURVE('',#37539,#38379); +#38379 = DEFINITIONAL_REPRESENTATION('',(#38380),#38384); +#38380 = LINE('',#38381,#38382); +#38381 = CARTESIAN_POINT('',(-0.,0.)); +#38382 = VECTOR('',#38383,1.); +#38383 = DIRECTION('',(6.767833676919E-44,-1.)); +#38384 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38385 = ORIENTED_EDGE('',*,*,#38120,.F.); +#38386 = ADVANCED_FACE('',(#38387),#35828,.F.); +#38387 = FACE_BOUND('',#38388,.F.); +#38388 = EDGE_LOOP('',(#38389,#38432,#38433,#38453)); +#38389 = ORIENTED_EDGE('',*,*,#38390,.F.); +#38390 = EDGE_CURVE('',#35763,#36757,#38391,.T.); +#38391 = SURFACE_CURVE('',#38392,(#38396,#38425),.PCURVE_S1.); +#38392 = LINE('',#38393,#38394); +#38393 = CARTESIAN_POINT('',(-2.25,-1.7,1.025)); +#38394 = VECTOR('',#38395,1.); +#38395 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#38396 = PCURVE('',#35828,#38397); +#38397 = DEFINITIONAL_REPRESENTATION('',(#38398),#38424); +#38398 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#38399,#38400,#38401,#38402, + #38403,#38404,#38405,#38406,#38407,#38408,#38409,#38410,#38411, + #38412,#38413,#38414,#38415,#38416,#38417,#38418,#38419,#38420, + #38421,#38422,#38423),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1 + ,1,1,1,1,1,1,1,1,1,1,4),(0.3,0.303409090909,0.306818181818, + 0.310227272727,0.313636363636,0.317045454545,0.320454545455, + 0.323863636364,0.327272727273,0.330681818182,0.334090909091,0.3375, + 0.340909090909,0.344318181818,0.347727272727,0.351136363636, + 0.354545454545,0.357954545455,0.361363636364,0.364772727273, + 0.368181818182,0.371590909091,0.375),.QUASI_UNIFORM_KNOTS.); +#38399 = CARTESIAN_POINT('',(0.575,0.)); +#38400 = CARTESIAN_POINT('',(0.574575424574,1.515151515152E-02)); +#38401 = CARTESIAN_POINT('',(0.5737256375,4.545454545455E-02)); +#38402 = CARTESIAN_POINT('',(0.57244904391,9.090909090909E-02)); +#38403 = CARTESIAN_POINT('',(0.571170533034,0.136363636364)); +#38404 = CARTESIAN_POINT('',(0.56989010055,0.181818181818)); +#38405 = CARTESIAN_POINT('',(0.568607742122,0.227272727273)); +#38406 = CARTESIAN_POINT('',(0.567323453401,0.272727272727)); +#38407 = CARTESIAN_POINT('',(0.566037230026,0.318181818182)); +#38408 = CARTESIAN_POINT('',(0.564749067621,0.363636363636)); +#38409 = CARTESIAN_POINT('',(0.5634589618,0.409090909091)); +#38410 = CARTESIAN_POINT('',(0.56216690816,0.454545454545)); +#38411 = CARTESIAN_POINT('',(0.560872902287,0.5)); +#38412 = CARTESIAN_POINT('',(0.559576939754,0.545454545455)); +#38413 = CARTESIAN_POINT('',(0.558279016117,0.590909090909)); +#38414 = CARTESIAN_POINT('',(0.556979126924,0.636363636364)); +#38415 = CARTESIAN_POINT('',(0.555677267705,0.681818181818)); +#38416 = CARTESIAN_POINT('',(0.554373433979,0.727272727273)); +#38417 = CARTESIAN_POINT('',(0.553067621251,0.772727272727)); +#38418 = CARTESIAN_POINT('',(0.55175982501,0.818181818182)); +#38419 = CARTESIAN_POINT('',(0.550450040735,0.863636363636)); +#38420 = CARTESIAN_POINT('',(0.549138263888,0.909090909091)); +#38421 = CARTESIAN_POINT('',(0.54782448992,0.954545454545)); +#38422 = CARTESIAN_POINT('',(0.546947306149,0.984848484848)); +#38423 = CARTESIAN_POINT('',(0.546508379888,1.)); +#38424 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38425 = PCURVE('',#36772,#38426); +#38426 = DEFINITIONAL_REPRESENTATION('',(#38427),#38431); +#38427 = LINE('',#38428,#38429); +#38428 = CARTESIAN_POINT('',(4.082776925422E-17,-0.41)); +#38429 = VECTOR('',#38430,1.); +#38430 = DIRECTION('',(1.,0.)); +#38431 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38432 = ORIENTED_EDGE('',*,*,#35814,.T.); +#38433 = ORIENTED_EDGE('',*,*,#38434,.T.); +#38434 = EDGE_CURVE('',#35787,#36785,#38435,.T.); +#38435 = SURFACE_CURVE('',#38436,(#38440,#38446),.PCURVE_S1.); +#38436 = LINE('',#38437,#38438); +#38437 = CARTESIAN_POINT('',(-2.25,-0.84,1.025)); +#38438 = VECTOR('',#38439,1.); +#38439 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#38440 = PCURVE('',#35828,#38441); +#38441 = DEFINITIONAL_REPRESENTATION('',(#38442),#38445); +#38442 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#38443,#38444),.UNSPECIFIED., + .F.,.F.,(2,2),(0.3,0.375),.PIECEWISE_BEZIER_KNOTS.); +#38443 = CARTESIAN_POINT('',(1.435,2.872827200473E-16)); +#38444 = CARTESIAN_POINT('',(1.420921787709,1.)); +#38445 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38446 = PCURVE('',#36822,#38447); +#38447 = DEFINITIONAL_REPRESENTATION('',(#38448),#38452); +#38448 = LINE('',#38449,#38450); +#38449 = CARTESIAN_POINT('',(0.,0.)); +#38450 = VECTOR('',#38451,1.); +#38451 = DIRECTION('',(1.,0.)); +#38452 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38453 = ORIENTED_EDGE('',*,*,#36784,.F.); +#38454 = ADVANCED_FACE('',(#38455),#35802,.F.); +#38455 = FACE_BOUND('',#38456,.F.); +#38456 = EDGE_LOOP('',(#38457,#38458,#38459,#38487,#38515,#38544,#38572, + #38600,#38628,#38661,#38689,#38718)); +#38457 = ORIENTED_EDGE('',*,*,#35786,.F.); +#38458 = ORIENTED_EDGE('',*,*,#35924,.T.); +#38459 = ORIENTED_EDGE('',*,*,#38460,.T.); +#38460 = EDGE_CURVE('',#35925,#38461,#38463,.T.); +#38461 = VERTEX_POINT('',#38462); +#38462 = CARTESIAN_POINT('',(-2.35,-0.84,0.725)); +#38463 = SURFACE_CURVE('',#38464,(#38469,#38480),.PCURVE_S1.); +#38464 = CIRCLE('',#38465,0.1); +#38465 = AXIS2_PLACEMENT_3D('',#38466,#38467,#38468); +#38466 = CARTESIAN_POINT('',(-2.25,-0.84,0.725)); +#38467 = DIRECTION('',(9.95799250103E-17,-1.,0.)); +#38468 = DIRECTION('',(-4.440892098501E-15,-4.422237021476E-31,1.)); +#38469 = PCURVE('',#35802,#38470); +#38470 = DEFINITIONAL_REPRESENTATION('',(#38471),#38479); +#38471 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#38472,#38473,#38474,#38475 + ,#38476,#38477,#38478),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#38472 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#38473 = CARTESIAN_POINT('',(0.292340342435,-7.415408746888E-03)); +#38474 = CARTESIAN_POINT('',(0.142340342435,7.918713163156E-02)); +#38475 = CARTESIAN_POINT('',(-7.659657565E-03,0.16578967201)); +#38476 = CARTESIAN_POINT('',(0.142340342435,0.252392212388)); +#38477 = CARTESIAN_POINT('',(0.292340342435,0.338994752767)); +#38478 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#38479 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38480 = PCURVE('',#35990,#38481); +#38481 = DEFINITIONAL_REPRESENTATION('',(#38482),#38486); +#38482 = LINE('',#38483,#38484); +#38483 = CARTESIAN_POINT('',(0.,0.)); +#38484 = VECTOR('',#38485,1.); +#38485 = DIRECTION('',(1.,0.)); +#38486 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38487 = ORIENTED_EDGE('',*,*,#38488,.T.); +#38488 = EDGE_CURVE('',#38461,#38489,#38491,.T.); +#38489 = VERTEX_POINT('',#38490); +#38490 = CARTESIAN_POINT('',(-2.35,-0.84,0.3)); +#38491 = SURFACE_CURVE('',#38492,(#38496,#38503),.PCURVE_S1.); +#38492 = LINE('',#38493,#38494); +#38493 = CARTESIAN_POINT('',(-2.35,-0.84,0.725)); +#38494 = VECTOR('',#38495,1.); +#38495 = DIRECTION('',(-1.044915787883E-15,-1.040526357994E-31,-1.)); +#38496 = PCURVE('',#35802,#38497); +#38497 = DEFINITIONAL_REPRESENTATION('',(#38498),#38502); +#38498 = LINE('',#38499,#38500); +#38499 = CARTESIAN_POINT('',(0.192340342435,6.578967201E-02)); +#38500 = VECTOR('',#38501,1.); +#38501 = DIRECTION('',(-1.,-1.044915787883E-15)); +#38502 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38503 = PCURVE('',#38504,#38509); +#38504 = PLANE('',#38505); +#38505 = AXIS2_PLACEMENT_3D('',#38506,#38507,#38508); +#38506 = CARTESIAN_POINT('',(-2.35,-0.84,0.725)); +#38507 = DIRECTION('',(-1.,-9.95799250103E-17,1.044915787883E-15)); +#38508 = DIRECTION('',(-1.044915787883E-15,-1.040526357994E-31,-1.)); +#38509 = DEFINITIONAL_REPRESENTATION('',(#38510),#38514); +#38510 = LINE('',#38511,#38512); +#38511 = CARTESIAN_POINT('',(-0.,0.)); +#38512 = VECTOR('',#38513,1.); +#38513 = DIRECTION('',(1.,0.)); +#38514 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38515 = ORIENTED_EDGE('',*,*,#38516,.T.); +#38516 = EDGE_CURVE('',#38489,#38517,#38519,.T.); +#38517 = VERTEX_POINT('',#38518); +#38518 = CARTESIAN_POINT('',(-2.65,-0.84,5.551115123126E-17)); +#38519 = SURFACE_CURVE('',#38520,(#38525,#38532),.PCURVE_S1.); +#38520 = CIRCLE('',#38521,0.3); +#38521 = AXIS2_PLACEMENT_3D('',#38522,#38523,#38524); +#38522 = CARTESIAN_POINT('',(-2.65,-0.84,0.3)); +#38523 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#38524 = DIRECTION('',(1.,9.95799250103E-17,3.515706244646E-15)); +#38525 = PCURVE('',#35802,#38526); +#38526 = DEFINITIONAL_REPRESENTATION('',(#38527),#38531); +#38527 = CIRCLE('',#38528,0.3); +#38528 = AXIS2_PLACEMENT_2D('',#38529,#38530); +#38529 = CARTESIAN_POINT('',(-0.232659657565,-0.23421032799)); +#38530 = DIRECTION('',(3.515706244646E-15,1.)); +#38531 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38532 = PCURVE('',#38533,#38538); +#38533 = CYLINDRICAL_SURFACE('',#38534,0.3); +#38534 = AXIS2_PLACEMENT_3D('',#38535,#38536,#38537); +#38535 = CARTESIAN_POINT('',(-2.65,-0.84,0.3)); +#38536 = DIRECTION('',(9.95799250103E-17,-1.,-0.)); +#38537 = DIRECTION('',(1.,9.95799250103E-17,3.515706244646E-15)); +#38538 = DEFINITIONAL_REPRESENTATION('',(#38539),#38543); +#38539 = LINE('',#38540,#38541); +#38540 = CARTESIAN_POINT('',(6.28318530718,0.)); +#38541 = VECTOR('',#38542,1.); +#38542 = DIRECTION('',(-1.,0.)); +#38543 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38544 = ORIENTED_EDGE('',*,*,#38545,.T.); +#38545 = EDGE_CURVE('',#38517,#38546,#38548,.T.); +#38546 = VERTEX_POINT('',#38547); +#38547 = CARTESIAN_POINT('',(-3.,-0.84,5.551115123126E-17)); +#38548 = SURFACE_CURVE('',#38549,(#38553,#38560),.PCURVE_S1.); +#38549 = LINE('',#38550,#38551); +#38550 = CARTESIAN_POINT('',(-2.65,-0.84,5.551115123126E-17)); +#38551 = VECTOR('',#38552,1.); +#38552 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#38553 = PCURVE('',#35802,#38554); +#38554 = DEFINITIONAL_REPRESENTATION('',(#38555),#38559); +#38555 = LINE('',#38556,#38557); +#38556 = CARTESIAN_POINT('',(-0.532659657565,-0.23421032799)); +#38557 = VECTOR('',#38558,1.); +#38558 = DIRECTION('',(0.,-1.)); +#38559 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38560 = PCURVE('',#38561,#38566); +#38561 = PLANE('',#38562); +#38562 = AXIS2_PLACEMENT_3D('',#38563,#38564,#38565); +#38563 = CARTESIAN_POINT('',(-2.65,-0.84,5.551115123126E-17)); +#38564 = DIRECTION('',(0.,0.,1.)); +#38565 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#38566 = DEFINITIONAL_REPRESENTATION('',(#38567),#38571); +#38567 = LINE('',#38568,#38569); +#38568 = CARTESIAN_POINT('',(0.,0.)); +#38569 = VECTOR('',#38570,1.); +#38570 = DIRECTION('',(1.,0.)); +#38571 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38572 = ORIENTED_EDGE('',*,*,#38573,.T.); +#38573 = EDGE_CURVE('',#38546,#38574,#38576,.T.); +#38574 = VERTEX_POINT('',#38575); +#38575 = CARTESIAN_POINT('',(-3.,-0.84,0.2)); +#38576 = SURFACE_CURVE('',#38577,(#38581,#38588),.PCURVE_S1.); +#38577 = LINE('',#38578,#38579); +#38578 = CARTESIAN_POINT('',(-3.,-0.84,5.551115123126E-17)); +#38579 = VECTOR('',#38580,1.); +#38580 = DIRECTION('',(0.,0.,1.)); +#38581 = PCURVE('',#35802,#38582); +#38582 = DEFINITIONAL_REPRESENTATION('',(#38583),#38587); +#38583 = LINE('',#38584,#38585); +#38584 = CARTESIAN_POINT('',(-0.532659657565,-0.58421032799)); +#38585 = VECTOR('',#38586,1.); +#38586 = DIRECTION('',(1.,0.)); +#38587 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38588 = PCURVE('',#38589,#38594); +#38589 = PLANE('',#38590); +#38590 = AXIS2_PLACEMENT_3D('',#38591,#38592,#38593); +#38591 = CARTESIAN_POINT('',(-3.,-0.84,5.551115123126E-17)); +#38592 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#38593 = DIRECTION('',(0.,-0.,1.)); +#38594 = DEFINITIONAL_REPRESENTATION('',(#38595),#38599); +#38595 = LINE('',#38596,#38597); +#38596 = CARTESIAN_POINT('',(0.,0.)); +#38597 = VECTOR('',#38598,1.); +#38598 = DIRECTION('',(1.,0.)); +#38599 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38600 = ORIENTED_EDGE('',*,*,#38601,.T.); +#38601 = EDGE_CURVE('',#38574,#38602,#38604,.T.); +#38602 = VERTEX_POINT('',#38603); +#38603 = CARTESIAN_POINT('',(-2.65,-0.84,0.2)); +#38604 = SURFACE_CURVE('',#38605,(#38609,#38616),.PCURVE_S1.); +#38605 = LINE('',#38606,#38607); +#38606 = CARTESIAN_POINT('',(-3.,-0.84,0.2)); +#38607 = VECTOR('',#38608,1.); +#38608 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#38609 = PCURVE('',#35802,#38610); +#38610 = DEFINITIONAL_REPRESENTATION('',(#38611),#38615); +#38611 = LINE('',#38612,#38613); +#38612 = CARTESIAN_POINT('',(-0.332659657565,-0.58421032799)); +#38613 = VECTOR('',#38614,1.); +#38614 = DIRECTION('',(0.,1.)); +#38615 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38616 = PCURVE('',#38617,#38622); +#38617 = PLANE('',#38618); +#38618 = AXIS2_PLACEMENT_3D('',#38619,#38620,#38621); +#38619 = CARTESIAN_POINT('',(-3.,-0.84,0.2)); +#38620 = DIRECTION('',(-0.,0.,-1.)); +#38621 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#38622 = DEFINITIONAL_REPRESENTATION('',(#38623),#38627); +#38623 = LINE('',#38624,#38625); +#38624 = CARTESIAN_POINT('',(0.,0.)); +#38625 = VECTOR('',#38626,1.); +#38626 = DIRECTION('',(1.,0.)); +#38627 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38628 = ORIENTED_EDGE('',*,*,#38629,.T.); +#38629 = EDGE_CURVE('',#38602,#38630,#38632,.T.); +#38630 = VERTEX_POINT('',#38631); +#38631 = CARTESIAN_POINT('',(-2.55,-0.84,0.3)); +#38632 = SURFACE_CURVE('',#38633,(#38638,#38649),.PCURVE_S1.); +#38633 = CIRCLE('',#38634,0.1); +#38634 = AXIS2_PLACEMENT_3D('',#38635,#38636,#38637); +#38635 = CARTESIAN_POINT('',(-2.65,-0.84,0.3)); +#38636 = DIRECTION('',(9.95799250103E-17,-1.,-0.)); +#38637 = DIRECTION('',(-0.,0.,-1.)); +#38638 = PCURVE('',#35802,#38639); +#38639 = DEFINITIONAL_REPRESENTATION('',(#38640),#38648); +#38640 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#38641,#38642,#38643,#38644 + ,#38645,#38646,#38647),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#38641 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#38642 = CARTESIAN_POINT('',(-0.332659657565,-6.100524723311E-02)); +#38643 = CARTESIAN_POINT('',(-0.182659657565,-0.147607787612)); +#38644 = CARTESIAN_POINT('',(-3.2659657565E-02,-0.23421032799)); +#38645 = CARTESIAN_POINT('',(-0.182659657565,-0.320812868368)); +#38646 = CARTESIAN_POINT('',(-0.332659657565,-0.407415408747)); +#38647 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#38648 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38649 = PCURVE('',#38650,#38655); +#38650 = CYLINDRICAL_SURFACE('',#38651,0.1); +#38651 = AXIS2_PLACEMENT_3D('',#38652,#38653,#38654); +#38652 = CARTESIAN_POINT('',(-2.65,-0.84,0.3)); +#38653 = DIRECTION('',(9.95799250103E-17,-1.,0.)); +#38654 = DIRECTION('',(0.,-0.,-1.)); +#38655 = DEFINITIONAL_REPRESENTATION('',(#38656),#38660); +#38656 = LINE('',#38657,#38658); +#38657 = CARTESIAN_POINT('',(0.,0.)); +#38658 = VECTOR('',#38659,1.); +#38659 = DIRECTION('',(1.,0.)); +#38660 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38661 = ORIENTED_EDGE('',*,*,#38662,.T.); +#38662 = EDGE_CURVE('',#38630,#38663,#38665,.T.); +#38663 = VERTEX_POINT('',#38664); +#38664 = CARTESIAN_POINT('',(-2.55,-0.84,0.725)); +#38665 = SURFACE_CURVE('',#38666,(#38670,#38677),.PCURVE_S1.); +#38666 = LINE('',#38667,#38668); +#38667 = CARTESIAN_POINT('',(-2.55,-0.84,0.3)); +#38668 = VECTOR('',#38669,1.); +#38669 = DIRECTION('',(0.,0.,1.)); +#38670 = PCURVE('',#35802,#38671); +#38671 = DEFINITIONAL_REPRESENTATION('',(#38672),#38676); +#38672 = LINE('',#38673,#38674); +#38673 = CARTESIAN_POINT('',(-0.232659657565,-0.13421032799)); +#38674 = VECTOR('',#38675,1.); +#38675 = DIRECTION('',(1.,0.)); +#38676 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38677 = PCURVE('',#38678,#38683); +#38678 = PLANE('',#38679); +#38679 = AXIS2_PLACEMENT_3D('',#38680,#38681,#38682); +#38680 = CARTESIAN_POINT('',(-2.55,-0.84,0.3)); +#38681 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#38682 = DIRECTION('',(0.,-0.,1.)); +#38683 = DEFINITIONAL_REPRESENTATION('',(#38684),#38688); +#38684 = LINE('',#38685,#38686); +#38685 = CARTESIAN_POINT('',(0.,0.)); +#38686 = VECTOR('',#38687,1.); +#38687 = DIRECTION('',(1.,0.)); +#38688 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38689 = ORIENTED_EDGE('',*,*,#38690,.T.); +#38690 = EDGE_CURVE('',#38663,#38691,#38693,.T.); +#38691 = VERTEX_POINT('',#38692); +#38692 = CARTESIAN_POINT('',(-2.25,-0.84,1.025)); +#38693 = SURFACE_CURVE('',#38694,(#38699,#38706),.PCURVE_S1.); +#38694 = CIRCLE('',#38695,0.3); +#38695 = AXIS2_PLACEMENT_3D('',#38696,#38697,#38698); +#38696 = CARTESIAN_POINT('',(-2.25,-0.84,0.725)); +#38697 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#38698 = DIRECTION('',(-1.,-9.95799250103E-17,3.700743415417E-16)); +#38699 = PCURVE('',#35802,#38700); +#38700 = DEFINITIONAL_REPRESENTATION('',(#38701),#38705); +#38701 = CIRCLE('',#38702,0.3); +#38702 = AXIS2_PLACEMENT_2D('',#38703,#38704); +#38703 = CARTESIAN_POINT('',(0.192340342435,0.16578967201)); +#38704 = DIRECTION('',(3.700743415417E-16,-1.)); +#38705 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38706 = PCURVE('',#38707,#38712); +#38707 = CYLINDRICAL_SURFACE('',#38708,0.3); +#38708 = AXIS2_PLACEMENT_3D('',#38709,#38710,#38711); +#38709 = CARTESIAN_POINT('',(-2.25,-0.84,0.725)); +#38710 = DIRECTION('',(9.95799250103E-17,-1.,-0.)); +#38711 = DIRECTION('',(-1.,-9.95799250103E-17,3.700743415417E-16)); +#38712 = DEFINITIONAL_REPRESENTATION('',(#38713),#38717); +#38713 = LINE('',#38714,#38715); +#38714 = CARTESIAN_POINT('',(6.28318530718,0.)); +#38715 = VECTOR('',#38716,1.); +#38716 = DIRECTION('',(-1.,0.)); +#38717 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38718 = ORIENTED_EDGE('',*,*,#38719,.T.); +#38719 = EDGE_CURVE('',#38691,#35787,#38720,.T.); +#38720 = SURFACE_CURVE('',#38721,(#38725,#38732),.PCURVE_S1.); +#38721 = LINE('',#38722,#38723); +#38722 = CARTESIAN_POINT('',(-2.25,-0.84,1.025)); +#38723 = VECTOR('',#38724,1.); +#38724 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#38725 = PCURVE('',#35802,#38726); +#38726 = DEFINITIONAL_REPRESENTATION('',(#38727),#38731); +#38727 = LINE('',#38728,#38729); +#38728 = CARTESIAN_POINT('',(0.492340342435,0.16578967201)); +#38729 = VECTOR('',#38730,1.); +#38730 = DIRECTION('',(0.,1.)); +#38731 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38732 = PCURVE('',#36822,#38733); +#38733 = DEFINITIONAL_REPRESENTATION('',(#38734),#38738); +#38734 = LINE('',#38735,#38736); +#38735 = CARTESIAN_POINT('',(0.,0.)); +#38736 = VECTOR('',#38737,1.); +#38737 = DIRECTION('',(1.,0.)); +#38738 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38739 = ADVANCED_FACE('',(#38740),#35859,.T.); +#38740 = FACE_BOUND('',#38741,.T.); +#38741 = EDGE_LOOP('',(#38742,#38743,#38744,#38772,#38800,#38829,#38857, + #38885,#38913,#38946,#38974,#39003)); +#38742 = ORIENTED_EDGE('',*,*,#35843,.F.); +#38743 = ORIENTED_EDGE('',*,*,#36034,.T.); +#38744 = ORIENTED_EDGE('',*,*,#38745,.T.); +#38745 = EDGE_CURVE('',#36035,#38746,#38748,.T.); +#38746 = VERTEX_POINT('',#38747); +#38747 = CARTESIAN_POINT('',(-2.35,0.84,0.725)); +#38748 = SURFACE_CURVE('',#38749,(#38754,#38765),.PCURVE_S1.); +#38749 = CIRCLE('',#38750,0.1); +#38750 = AXIS2_PLACEMENT_3D('',#38751,#38752,#38753); +#38751 = CARTESIAN_POINT('',(-2.25,0.84,0.725)); +#38752 = DIRECTION('',(9.95799250103E-17,-1.,0.)); +#38753 = DIRECTION('',(-4.440892098501E-15,-4.422237021476E-31,1.)); +#38754 = PCURVE('',#35859,#38755); +#38755 = DEFINITIONAL_REPRESENTATION('',(#38756),#38764); +#38756 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#38757,#38758,#38759,#38760 + ,#38761,#38762,#38763),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#38757 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#38758 = CARTESIAN_POINT('',(0.292340342435,-7.415408746888E-03)); +#38759 = CARTESIAN_POINT('',(0.142340342435,7.918713163156E-02)); +#38760 = CARTESIAN_POINT('',(-7.659657565E-03,0.16578967201)); +#38761 = CARTESIAN_POINT('',(0.142340342435,0.252392212388)); +#38762 = CARTESIAN_POINT('',(0.292340342435,0.338994752767)); +#38763 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#38764 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38765 = PCURVE('',#36071,#38766); +#38766 = DEFINITIONAL_REPRESENTATION('',(#38767),#38771); +#38767 = LINE('',#38768,#38769); +#38768 = CARTESIAN_POINT('',(0.,-0.41)); +#38769 = VECTOR('',#38770,1.); +#38770 = DIRECTION('',(1.,0.)); +#38771 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38772 = ORIENTED_EDGE('',*,*,#38773,.T.); +#38773 = EDGE_CURVE('',#38746,#38774,#38776,.T.); +#38774 = VERTEX_POINT('',#38775); +#38775 = CARTESIAN_POINT('',(-2.35,0.84,0.3)); +#38776 = SURFACE_CURVE('',#38777,(#38781,#38788),.PCURVE_S1.); +#38777 = LINE('',#38778,#38779); +#38778 = CARTESIAN_POINT('',(-2.35,0.84,0.725)); +#38779 = VECTOR('',#38780,1.); +#38780 = DIRECTION('',(-1.044915787883E-15,-1.040526357994E-31,-1.)); +#38781 = PCURVE('',#35859,#38782); +#38782 = DEFINITIONAL_REPRESENTATION('',(#38783),#38787); +#38783 = LINE('',#38784,#38785); +#38784 = CARTESIAN_POINT('',(0.192340342435,6.578967201E-02)); +#38785 = VECTOR('',#38786,1.); +#38786 = DIRECTION('',(-1.,-1.044915787883E-15)); +#38787 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38788 = PCURVE('',#38789,#38794); +#38789 = PLANE('',#38790); +#38790 = AXIS2_PLACEMENT_3D('',#38791,#38792,#38793); +#38791 = CARTESIAN_POINT('',(-2.35,0.43,0.725)); +#38792 = DIRECTION('',(-1.,-9.95799250103E-17,1.044915787883E-15)); +#38793 = DIRECTION('',(-1.044915787883E-15,-1.040526357994E-31,-1.)); +#38794 = DEFINITIONAL_REPRESENTATION('',(#38795),#38799); +#38795 = LINE('',#38796,#38797); +#38796 = CARTESIAN_POINT('',(-4.266158067775E-32,-0.41)); +#38797 = VECTOR('',#38798,1.); +#38798 = DIRECTION('',(1.,0.)); +#38799 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38800 = ORIENTED_EDGE('',*,*,#38801,.T.); +#38801 = EDGE_CURVE('',#38774,#38802,#38804,.T.); +#38802 = VERTEX_POINT('',#38803); +#38803 = CARTESIAN_POINT('',(-2.65,0.84,5.551115123126E-17)); +#38804 = SURFACE_CURVE('',#38805,(#38810,#38817),.PCURVE_S1.); +#38805 = CIRCLE('',#38806,0.3); +#38806 = AXIS2_PLACEMENT_3D('',#38807,#38808,#38809); +#38807 = CARTESIAN_POINT('',(-2.65,0.84,0.3)); +#38808 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#38809 = DIRECTION('',(1.,9.95799250103E-17,3.515706244646E-15)); +#38810 = PCURVE('',#35859,#38811); +#38811 = DEFINITIONAL_REPRESENTATION('',(#38812),#38816); +#38812 = CIRCLE('',#38813,0.3); +#38813 = AXIS2_PLACEMENT_2D('',#38814,#38815); +#38814 = CARTESIAN_POINT('',(-0.232659657565,-0.23421032799)); +#38815 = DIRECTION('',(3.515706244646E-15,1.)); +#38816 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38817 = PCURVE('',#38818,#38823); +#38818 = CYLINDRICAL_SURFACE('',#38819,0.3); +#38819 = AXIS2_PLACEMENT_3D('',#38820,#38821,#38822); +#38820 = CARTESIAN_POINT('',(-2.65,0.43,0.3)); +#38821 = DIRECTION('',(9.95799250103E-17,-1.,-0.)); +#38822 = DIRECTION('',(1.,9.95799250103E-17,3.515706244646E-15)); +#38823 = DEFINITIONAL_REPRESENTATION('',(#38824),#38828); +#38824 = LINE('',#38825,#38826); +#38825 = CARTESIAN_POINT('',(6.28318530718,-0.41)); +#38826 = VECTOR('',#38827,1.); +#38827 = DIRECTION('',(-1.,0.)); +#38828 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38829 = ORIENTED_EDGE('',*,*,#38830,.T.); +#38830 = EDGE_CURVE('',#38802,#38831,#38833,.T.); +#38831 = VERTEX_POINT('',#38832); +#38832 = CARTESIAN_POINT('',(-3.,0.84,5.551115123126E-17)); +#38833 = SURFACE_CURVE('',#38834,(#38838,#38845),.PCURVE_S1.); +#38834 = LINE('',#38835,#38836); +#38835 = CARTESIAN_POINT('',(-2.65,0.84,5.551115123126E-17)); +#38836 = VECTOR('',#38837,1.); +#38837 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#38838 = PCURVE('',#35859,#38839); +#38839 = DEFINITIONAL_REPRESENTATION('',(#38840),#38844); +#38840 = LINE('',#38841,#38842); +#38841 = CARTESIAN_POINT('',(-0.532659657565,-0.23421032799)); +#38842 = VECTOR('',#38843,1.); +#38843 = DIRECTION('',(0.,-1.)); +#38844 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38845 = PCURVE('',#38846,#38851); +#38846 = PLANE('',#38847); +#38847 = AXIS2_PLACEMENT_3D('',#38848,#38849,#38850); +#38848 = CARTESIAN_POINT('',(-2.65,0.43,5.551115123126E-17)); +#38849 = DIRECTION('',(0.,0.,1.)); +#38850 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#38851 = DEFINITIONAL_REPRESENTATION('',(#38852),#38856); +#38852 = LINE('',#38853,#38854); +#38853 = CARTESIAN_POINT('',(-4.082776925422E-17,-0.41)); +#38854 = VECTOR('',#38855,1.); +#38855 = DIRECTION('',(1.,0.)); +#38856 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38857 = ORIENTED_EDGE('',*,*,#38858,.T.); +#38858 = EDGE_CURVE('',#38831,#38859,#38861,.T.); +#38859 = VERTEX_POINT('',#38860); +#38860 = CARTESIAN_POINT('',(-3.,0.84,0.2)); +#38861 = SURFACE_CURVE('',#38862,(#38866,#38873),.PCURVE_S1.); +#38862 = LINE('',#38863,#38864); +#38863 = CARTESIAN_POINT('',(-3.,0.84,5.551115123126E-17)); +#38864 = VECTOR('',#38865,1.); +#38865 = DIRECTION('',(0.,0.,1.)); +#38866 = PCURVE('',#35859,#38867); +#38867 = DEFINITIONAL_REPRESENTATION('',(#38868),#38872); +#38868 = LINE('',#38869,#38870); +#38869 = CARTESIAN_POINT('',(-0.532659657565,-0.58421032799)); +#38870 = VECTOR('',#38871,1.); +#38871 = DIRECTION('',(1.,0.)); +#38872 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38873 = PCURVE('',#38874,#38879); +#38874 = PLANE('',#38875); +#38875 = AXIS2_PLACEMENT_3D('',#38876,#38877,#38878); +#38876 = CARTESIAN_POINT('',(-3.,0.43,5.551115123126E-17)); +#38877 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#38878 = DIRECTION('',(0.,-0.,1.)); +#38879 = DEFINITIONAL_REPRESENTATION('',(#38880),#38884); +#38880 = LINE('',#38881,#38882); +#38881 = CARTESIAN_POINT('',(0.,-0.41)); +#38882 = VECTOR('',#38883,1.); +#38883 = DIRECTION('',(1.,0.)); +#38884 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38885 = ORIENTED_EDGE('',*,*,#38886,.T.); +#38886 = EDGE_CURVE('',#38859,#38887,#38889,.T.); +#38887 = VERTEX_POINT('',#38888); +#38888 = CARTESIAN_POINT('',(-2.65,0.84,0.2)); +#38889 = SURFACE_CURVE('',#38890,(#38894,#38901),.PCURVE_S1.); +#38890 = LINE('',#38891,#38892); +#38891 = CARTESIAN_POINT('',(-3.,0.84,0.2)); +#38892 = VECTOR('',#38893,1.); +#38893 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#38894 = PCURVE('',#35859,#38895); +#38895 = DEFINITIONAL_REPRESENTATION('',(#38896),#38900); +#38896 = LINE('',#38897,#38898); +#38897 = CARTESIAN_POINT('',(-0.332659657565,-0.58421032799)); +#38898 = VECTOR('',#38899,1.); +#38899 = DIRECTION('',(0.,1.)); +#38900 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38901 = PCURVE('',#38902,#38907); +#38902 = PLANE('',#38903); +#38903 = AXIS2_PLACEMENT_3D('',#38904,#38905,#38906); +#38904 = CARTESIAN_POINT('',(-3.,0.43,0.2)); +#38905 = DIRECTION('',(-0.,0.,-1.)); +#38906 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#38907 = DEFINITIONAL_REPRESENTATION('',(#38908),#38912); +#38908 = LINE('',#38909,#38910); +#38909 = CARTESIAN_POINT('',(4.082776925422E-17,-0.41)); +#38910 = VECTOR('',#38911,1.); +#38911 = DIRECTION('',(1.,0.)); +#38912 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38913 = ORIENTED_EDGE('',*,*,#38914,.T.); +#38914 = EDGE_CURVE('',#38887,#38915,#38917,.T.); +#38915 = VERTEX_POINT('',#38916); +#38916 = CARTESIAN_POINT('',(-2.55,0.84,0.3)); +#38917 = SURFACE_CURVE('',#38918,(#38923,#38934),.PCURVE_S1.); +#38918 = CIRCLE('',#38919,0.1); +#38919 = AXIS2_PLACEMENT_3D('',#38920,#38921,#38922); +#38920 = CARTESIAN_POINT('',(-2.65,0.84,0.3)); +#38921 = DIRECTION('',(9.95799250103E-17,-1.,-0.)); +#38922 = DIRECTION('',(-0.,0.,-1.)); +#38923 = PCURVE('',#35859,#38924); +#38924 = DEFINITIONAL_REPRESENTATION('',(#38925),#38933); +#38925 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#38926,#38927,#38928,#38929 + ,#38930,#38931,#38932),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#38926 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#38927 = CARTESIAN_POINT('',(-0.332659657565,-6.100524723311E-02)); +#38928 = CARTESIAN_POINT('',(-0.182659657565,-0.147607787612)); +#38929 = CARTESIAN_POINT('',(-3.2659657565E-02,-0.23421032799)); +#38930 = CARTESIAN_POINT('',(-0.182659657565,-0.320812868368)); +#38931 = CARTESIAN_POINT('',(-0.332659657565,-0.407415408747)); +#38932 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#38933 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38934 = PCURVE('',#38935,#38940); +#38935 = CYLINDRICAL_SURFACE('',#38936,0.1); +#38936 = AXIS2_PLACEMENT_3D('',#38937,#38938,#38939); +#38937 = CARTESIAN_POINT('',(-2.65,0.43,0.3)); +#38938 = DIRECTION('',(9.95799250103E-17,-1.,0.)); +#38939 = DIRECTION('',(0.,-0.,-1.)); +#38940 = DEFINITIONAL_REPRESENTATION('',(#38941),#38945); +#38941 = LINE('',#38942,#38943); +#38942 = CARTESIAN_POINT('',(0.,-0.41)); +#38943 = VECTOR('',#38944,1.); +#38944 = DIRECTION('',(1.,0.)); +#38945 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38946 = ORIENTED_EDGE('',*,*,#38947,.T.); +#38947 = EDGE_CURVE('',#38915,#38948,#38950,.T.); +#38948 = VERTEX_POINT('',#38949); +#38949 = CARTESIAN_POINT('',(-2.55,0.84,0.725)); +#38950 = SURFACE_CURVE('',#38951,(#38955,#38962),.PCURVE_S1.); +#38951 = LINE('',#38952,#38953); +#38952 = CARTESIAN_POINT('',(-2.55,0.84,0.3)); +#38953 = VECTOR('',#38954,1.); +#38954 = DIRECTION('',(0.,0.,1.)); +#38955 = PCURVE('',#35859,#38956); +#38956 = DEFINITIONAL_REPRESENTATION('',(#38957),#38961); +#38957 = LINE('',#38958,#38959); +#38958 = CARTESIAN_POINT('',(-0.232659657565,-0.13421032799)); +#38959 = VECTOR('',#38960,1.); +#38960 = DIRECTION('',(1.,0.)); +#38961 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38962 = PCURVE('',#38963,#38968); +#38963 = PLANE('',#38964); +#38964 = AXIS2_PLACEMENT_3D('',#38965,#38966,#38967); +#38965 = CARTESIAN_POINT('',(-2.55,0.43,0.3)); +#38966 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#38967 = DIRECTION('',(0.,-0.,1.)); +#38968 = DEFINITIONAL_REPRESENTATION('',(#38969),#38973); +#38969 = LINE('',#38970,#38971); +#38970 = CARTESIAN_POINT('',(0.,-0.41)); +#38971 = VECTOR('',#38972,1.); +#38972 = DIRECTION('',(1.,0.)); +#38973 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38974 = ORIENTED_EDGE('',*,*,#38975,.T.); +#38975 = EDGE_CURVE('',#38948,#38976,#38978,.T.); +#38976 = VERTEX_POINT('',#38977); +#38977 = CARTESIAN_POINT('',(-2.25,0.84,1.025)); +#38978 = SURFACE_CURVE('',#38979,(#38984,#38991),.PCURVE_S1.); +#38979 = CIRCLE('',#38980,0.3); +#38980 = AXIS2_PLACEMENT_3D('',#38981,#38982,#38983); +#38981 = CARTESIAN_POINT('',(-2.25,0.84,0.725)); +#38982 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#38983 = DIRECTION('',(-1.,-9.95799250103E-17,3.700743415417E-16)); +#38984 = PCURVE('',#35859,#38985); +#38985 = DEFINITIONAL_REPRESENTATION('',(#38986),#38990); +#38986 = CIRCLE('',#38987,0.3); +#38987 = AXIS2_PLACEMENT_2D('',#38988,#38989); +#38988 = CARTESIAN_POINT('',(0.192340342435,0.16578967201)); +#38989 = DIRECTION('',(3.700743415417E-16,-1.)); +#38990 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#38991 = PCURVE('',#38992,#38997); +#38992 = CYLINDRICAL_SURFACE('',#38993,0.3); +#38993 = AXIS2_PLACEMENT_3D('',#38994,#38995,#38996); +#38994 = CARTESIAN_POINT('',(-2.25,0.43,0.725)); +#38995 = DIRECTION('',(9.95799250103E-17,-1.,-0.)); +#38996 = DIRECTION('',(-1.,-9.95799250103E-17,3.700743415417E-16)); +#38997 = DEFINITIONAL_REPRESENTATION('',(#38998),#39002); +#38998 = LINE('',#38999,#39000); +#38999 = CARTESIAN_POINT('',(6.28318530718,-0.41)); +#39000 = VECTOR('',#39001,1.); +#39001 = DIRECTION('',(-1.,0.)); +#39002 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39003 = ORIENTED_EDGE('',*,*,#39004,.T.); +#39004 = EDGE_CURVE('',#38976,#35844,#39005,.T.); +#39005 = SURFACE_CURVE('',#39006,(#39010,#39017),.PCURVE_S1.); +#39006 = LINE('',#39007,#39008); +#39007 = CARTESIAN_POINT('',(-2.25,0.84,1.025)); +#39008 = VECTOR('',#39009,1.); +#39009 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#39010 = PCURVE('',#35859,#39011); +#39011 = DEFINITIONAL_REPRESENTATION('',(#39012),#39016); +#39012 = LINE('',#39013,#39014); +#39013 = CARTESIAN_POINT('',(0.492340342435,0.16578967201)); +#39014 = VECTOR('',#39015,1.); +#39015 = DIRECTION('',(0.,1.)); +#39016 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39017 = PCURVE('',#36872,#39018); +#39018 = DEFINITIONAL_REPRESENTATION('',(#39019),#39023); +#39019 = LINE('',#39020,#39021); +#39020 = CARTESIAN_POINT('',(4.082776925422E-17,-0.41)); +#39021 = VECTOR('',#39022,1.); +#39022 = DIRECTION('',(1.,0.)); +#39023 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39024 = ADVANCED_FACE('',(#39025),#35909,.F.); +#39025 = FACE_BOUND('',#39026,.F.); +#39026 = EDGE_LOOP('',(#39027,#39047,#39048,#39091)); +#39027 = ORIENTED_EDGE('',*,*,#39028,.F.); +#39028 = EDGE_CURVE('',#35844,#36857,#39029,.T.); +#39029 = SURFACE_CURVE('',#39030,(#39034,#39040),.PCURVE_S1.); +#39030 = LINE('',#39031,#39032); +#39031 = CARTESIAN_POINT('',(-2.25,0.84,1.025)); +#39032 = VECTOR('',#39033,1.); +#39033 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#39034 = PCURVE('',#35909,#39035); +#39035 = DEFINITIONAL_REPRESENTATION('',(#39036),#39039); +#39036 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#39037,#39038),.UNSPECIFIED., + .F.,.F.,(2,2),(0.3,0.375),.PIECEWISE_BEZIER_KNOTS.); +#39037 = CARTESIAN_POINT('',(3.115,2.878610001836E-16)); +#39038 = CARTESIAN_POINT('',(3.129078212291,1.)); +#39039 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39040 = PCURVE('',#36872,#39041); +#39041 = DEFINITIONAL_REPRESENTATION('',(#39042),#39046); +#39042 = LINE('',#39043,#39044); +#39043 = CARTESIAN_POINT('',(4.082776925422E-17,-0.41)); +#39044 = VECTOR('',#39045,1.); +#39045 = DIRECTION('',(1.,0.)); +#39046 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39047 = ORIENTED_EDGE('',*,*,#35895,.T.); +#39048 = ORIENTED_EDGE('',*,*,#39049,.T.); +#39049 = EDGE_CURVE('',#35873,#36885,#39050,.T.); +#39050 = SURFACE_CURVE('',#39051,(#39055,#39084),.PCURVE_S1.); +#39051 = LINE('',#39052,#39053); +#39052 = CARTESIAN_POINT('',(-2.25,1.7,1.025)); +#39053 = VECTOR('',#39054,1.); +#39054 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#39055 = PCURVE('',#35909,#39056); +#39056 = DEFINITIONAL_REPRESENTATION('',(#39057),#39083); +#39057 = B_SPLINE_CURVE_WITH_KNOTS('',3,(#39058,#39059,#39060,#39061, + #39062,#39063,#39064,#39065,#39066,#39067,#39068,#39069,#39070, + #39071,#39072,#39073,#39074,#39075,#39076,#39077,#39078,#39079, + #39080,#39081,#39082),.UNSPECIFIED.,.F.,.F.,(4,1,1,1,1,1,1,1,1,1,1,1 + ,1,1,1,1,1,1,1,1,1,1,4),(0.3,0.303409090909,0.306818181818, + 0.310227272727,0.313636363636,0.317045454545,0.320454545455, + 0.323863636364,0.327272727273,0.330681818182,0.334090909091,0.3375, + 0.340909090909,0.344318181818,0.347727272727,0.351136363636, + 0.354545454545,0.357954545455,0.361363636364,0.364772727273, + 0.368181818182,0.371590909091,0.375),.QUASI_UNIFORM_KNOTS.); +#39058 = CARTESIAN_POINT('',(3.975,0.)); +#39059 = CARTESIAN_POINT('',(3.975424575426,1.515151515152E-02)); +#39060 = CARTESIAN_POINT('',(3.9762743625,4.545454545455E-02)); +#39061 = CARTESIAN_POINT('',(3.97755095609,9.090909090909E-02)); +#39062 = CARTESIAN_POINT('',(3.978829466966,0.136363636364)); +#39063 = CARTESIAN_POINT('',(3.98010989945,0.181818181818)); +#39064 = CARTESIAN_POINT('',(3.981392257878,0.227272727273)); +#39065 = CARTESIAN_POINT('',(3.982676546599,0.272727272727)); +#39066 = CARTESIAN_POINT('',(3.983962769974,0.318181818182)); +#39067 = CARTESIAN_POINT('',(3.985250932379,0.363636363636)); +#39068 = CARTESIAN_POINT('',(3.9865410382,0.409090909091)); +#39069 = CARTESIAN_POINT('',(3.98783309184,0.454545454545)); +#39070 = CARTESIAN_POINT('',(3.989127097713,0.5)); +#39071 = CARTESIAN_POINT('',(3.990423060246,0.545454545455)); +#39072 = CARTESIAN_POINT('',(3.991720983883,0.590909090909)); +#39073 = CARTESIAN_POINT('',(3.993020873076,0.636363636364)); +#39074 = CARTESIAN_POINT('',(3.994322732295,0.681818181818)); +#39075 = CARTESIAN_POINT('',(3.995626566021,0.727272727273)); +#39076 = CARTESIAN_POINT('',(3.996932378749,0.772727272727)); +#39077 = CARTESIAN_POINT('',(3.99824017499,0.818181818182)); +#39078 = CARTESIAN_POINT('',(3.999549959265,0.863636363636)); +#39079 = CARTESIAN_POINT('',(4.000861736112,0.909090909091)); +#39080 = CARTESIAN_POINT('',(4.00217551008,0.954545454545)); +#39081 = CARTESIAN_POINT('',(4.003052693851,0.984848484848)); +#39082 = CARTESIAN_POINT('',(4.003491620112,1.)); +#39083 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39084 = PCURVE('',#36922,#39085); +#39085 = DEFINITIONAL_REPRESENTATION('',(#39086),#39090); +#39086 = LINE('',#39087,#39088); +#39087 = CARTESIAN_POINT('',(0.,0.)); +#39088 = VECTOR('',#39089,1.); +#39089 = DIRECTION('',(1.,0.)); +#39090 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39091 = ORIENTED_EDGE('',*,*,#36884,.F.); +#39092 = ADVANCED_FACE('',(#39093),#35990,.F.); +#39093 = FACE_BOUND('',#39094,.F.); +#39094 = EDGE_LOOP('',(#39095,#39096,#39124,#39145)); +#39095 = ORIENTED_EDGE('',*,*,#35976,.T.); +#39096 = ORIENTED_EDGE('',*,*,#39097,.T.); +#39097 = EDGE_CURVE('',#35949,#39098,#39100,.T.); +#39098 = VERTEX_POINT('',#39099); +#39099 = CARTESIAN_POINT('',(-2.35,-0.43,0.725)); +#39100 = SURFACE_CURVE('',#39101,(#39106,#39113),.PCURVE_S1.); +#39101 = CIRCLE('',#39102,0.1); +#39102 = AXIS2_PLACEMENT_3D('',#39103,#39104,#39105); +#39103 = CARTESIAN_POINT('',(-2.25,-0.43,0.725)); +#39104 = DIRECTION('',(9.95799250103E-17,-1.,0.)); +#39105 = DIRECTION('',(-4.440892098501E-15,-4.422237021476E-31,1.)); +#39106 = PCURVE('',#35990,#39107); +#39107 = DEFINITIONAL_REPRESENTATION('',(#39108),#39112); +#39108 = LINE('',#39109,#39110); +#39109 = CARTESIAN_POINT('',(0.,-0.41)); +#39110 = VECTOR('',#39111,1.); +#39111 = DIRECTION('',(1.,0.)); +#39112 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39113 = PCURVE('',#35964,#39114); +#39114 = DEFINITIONAL_REPRESENTATION('',(#39115),#39123); +#39115 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#39116,#39117,#39118,#39119 + ,#39120,#39121,#39122),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#39116 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#39117 = CARTESIAN_POINT('',(0.292340342435,-7.415408746888E-03)); +#39118 = CARTESIAN_POINT('',(0.142340342435,7.918713163156E-02)); +#39119 = CARTESIAN_POINT('',(-7.659657565E-03,0.16578967201)); +#39120 = CARTESIAN_POINT('',(0.142340342435,0.252392212388)); +#39121 = CARTESIAN_POINT('',(0.292340342435,0.338994752767)); +#39122 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#39123 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39124 = ORIENTED_EDGE('',*,*,#39125,.F.); +#39125 = EDGE_CURVE('',#38461,#39098,#39126,.T.); +#39126 = SURFACE_CURVE('',#39127,(#39131,#39138),.PCURVE_S1.); +#39127 = LINE('',#39128,#39129); +#39128 = CARTESIAN_POINT('',(-2.35,-0.84,0.725)); +#39129 = VECTOR('',#39130,1.); +#39130 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#39131 = PCURVE('',#35990,#39132); +#39132 = DEFINITIONAL_REPRESENTATION('',(#39133),#39137); +#39133 = LINE('',#39134,#39135); +#39134 = CARTESIAN_POINT('',(1.570796326795,0.)); +#39135 = VECTOR('',#39136,1.); +#39136 = DIRECTION('',(0.,-1.)); +#39137 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39138 = PCURVE('',#38504,#39139); +#39139 = DEFINITIONAL_REPRESENTATION('',(#39140),#39144); +#39140 = LINE('',#39141,#39142); +#39141 = CARTESIAN_POINT('',(-0.,0.)); +#39142 = VECTOR('',#39143,1.); +#39143 = DIRECTION('',(6.767833676919E-44,-1.)); +#39144 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39145 = ORIENTED_EDGE('',*,*,#38460,.F.); +#39146 = ADVANCED_FACE('',(#39147),#35964,.T.); +#39147 = FACE_BOUND('',#39148,.T.); +#39148 = EDGE_LOOP('',(#39149,#39150,#39151,#39152,#39175,#39199,#39222, + #39245,#39268,#39296,#39319,#39343)); +#39149 = ORIENTED_EDGE('',*,*,#36086,.F.); +#39150 = ORIENTED_EDGE('',*,*,#35948,.T.); +#39151 = ORIENTED_EDGE('',*,*,#39097,.T.); +#39152 = ORIENTED_EDGE('',*,*,#39153,.T.); +#39153 = EDGE_CURVE('',#39098,#39154,#39156,.T.); +#39154 = VERTEX_POINT('',#39155); +#39155 = CARTESIAN_POINT('',(-2.35,-0.43,0.3)); +#39156 = SURFACE_CURVE('',#39157,(#39161,#39168),.PCURVE_S1.); +#39157 = LINE('',#39158,#39159); +#39158 = CARTESIAN_POINT('',(-2.35,-0.43,0.725)); +#39159 = VECTOR('',#39160,1.); +#39160 = DIRECTION('',(-1.044915787883E-15,-1.040526357994E-31,-1.)); +#39161 = PCURVE('',#35964,#39162); +#39162 = DEFINITIONAL_REPRESENTATION('',(#39163),#39167); +#39163 = LINE('',#39164,#39165); +#39164 = CARTESIAN_POINT('',(0.192340342435,6.578967201E-02)); +#39165 = VECTOR('',#39166,1.); +#39166 = DIRECTION('',(-1.,-1.044915787883E-15)); +#39167 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39168 = PCURVE('',#38504,#39169); +#39169 = DEFINITIONAL_REPRESENTATION('',(#39170),#39174); +#39170 = LINE('',#39171,#39172); +#39171 = CARTESIAN_POINT('',(-4.266158067775E-32,-0.41)); +#39172 = VECTOR('',#39173,1.); +#39173 = DIRECTION('',(1.,0.)); +#39174 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39175 = ORIENTED_EDGE('',*,*,#39176,.T.); +#39176 = EDGE_CURVE('',#39154,#39177,#39179,.T.); +#39177 = VERTEX_POINT('',#39178); +#39178 = CARTESIAN_POINT('',(-2.65,-0.43,5.551115123126E-17)); +#39179 = SURFACE_CURVE('',#39180,(#39185,#39192),.PCURVE_S1.); +#39180 = CIRCLE('',#39181,0.3); +#39181 = AXIS2_PLACEMENT_3D('',#39182,#39183,#39184); +#39182 = CARTESIAN_POINT('',(-2.65,-0.43,0.3)); +#39183 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#39184 = DIRECTION('',(1.,9.95799250103E-17,3.515706244646E-15)); +#39185 = PCURVE('',#35964,#39186); +#39186 = DEFINITIONAL_REPRESENTATION('',(#39187),#39191); +#39187 = CIRCLE('',#39188,0.3); +#39188 = AXIS2_PLACEMENT_2D('',#39189,#39190); +#39189 = CARTESIAN_POINT('',(-0.232659657565,-0.23421032799)); +#39190 = DIRECTION('',(3.515706244646E-15,1.)); +#39191 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39192 = PCURVE('',#38533,#39193); +#39193 = DEFINITIONAL_REPRESENTATION('',(#39194),#39198); +#39194 = LINE('',#39195,#39196); +#39195 = CARTESIAN_POINT('',(6.28318530718,-0.41)); +#39196 = VECTOR('',#39197,1.); +#39197 = DIRECTION('',(-1.,0.)); +#39198 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39199 = ORIENTED_EDGE('',*,*,#39200,.T.); +#39200 = EDGE_CURVE('',#39177,#39201,#39203,.T.); +#39201 = VERTEX_POINT('',#39202); +#39202 = CARTESIAN_POINT('',(-3.,-0.43,5.551115123126E-17)); +#39203 = SURFACE_CURVE('',#39204,(#39208,#39215),.PCURVE_S1.); +#39204 = LINE('',#39205,#39206); +#39205 = CARTESIAN_POINT('',(-2.65,-0.43,5.551115123126E-17)); +#39206 = VECTOR('',#39207,1.); +#39207 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#39208 = PCURVE('',#35964,#39209); +#39209 = DEFINITIONAL_REPRESENTATION('',(#39210),#39214); +#39210 = LINE('',#39211,#39212); +#39211 = CARTESIAN_POINT('',(-0.532659657565,-0.23421032799)); +#39212 = VECTOR('',#39213,1.); +#39213 = DIRECTION('',(0.,-1.)); +#39214 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39215 = PCURVE('',#38561,#39216); +#39216 = DEFINITIONAL_REPRESENTATION('',(#39217),#39221); +#39217 = LINE('',#39218,#39219); +#39218 = CARTESIAN_POINT('',(-4.082776925422E-17,-0.41)); +#39219 = VECTOR('',#39220,1.); +#39220 = DIRECTION('',(1.,0.)); +#39221 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39222 = ORIENTED_EDGE('',*,*,#39223,.T.); +#39223 = EDGE_CURVE('',#39201,#39224,#39226,.T.); +#39224 = VERTEX_POINT('',#39225); +#39225 = CARTESIAN_POINT('',(-3.,-0.43,0.2)); +#39226 = SURFACE_CURVE('',#39227,(#39231,#39238),.PCURVE_S1.); +#39227 = LINE('',#39228,#39229); +#39228 = CARTESIAN_POINT('',(-3.,-0.43,5.551115123126E-17)); +#39229 = VECTOR('',#39230,1.); +#39230 = DIRECTION('',(0.,0.,1.)); +#39231 = PCURVE('',#35964,#39232); +#39232 = DEFINITIONAL_REPRESENTATION('',(#39233),#39237); +#39233 = LINE('',#39234,#39235); +#39234 = CARTESIAN_POINT('',(-0.532659657565,-0.58421032799)); +#39235 = VECTOR('',#39236,1.); +#39236 = DIRECTION('',(1.,0.)); +#39237 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39238 = PCURVE('',#38589,#39239); +#39239 = DEFINITIONAL_REPRESENTATION('',(#39240),#39244); +#39240 = LINE('',#39241,#39242); +#39241 = CARTESIAN_POINT('',(0.,-0.41)); +#39242 = VECTOR('',#39243,1.); +#39243 = DIRECTION('',(1.,0.)); +#39244 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39245 = ORIENTED_EDGE('',*,*,#39246,.T.); +#39246 = EDGE_CURVE('',#39224,#39247,#39249,.T.); +#39247 = VERTEX_POINT('',#39248); +#39248 = CARTESIAN_POINT('',(-2.65,-0.43,0.2)); +#39249 = SURFACE_CURVE('',#39250,(#39254,#39261),.PCURVE_S1.); +#39250 = LINE('',#39251,#39252); +#39251 = CARTESIAN_POINT('',(-3.,-0.43,0.2)); +#39252 = VECTOR('',#39253,1.); +#39253 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#39254 = PCURVE('',#35964,#39255); +#39255 = DEFINITIONAL_REPRESENTATION('',(#39256),#39260); +#39256 = LINE('',#39257,#39258); +#39257 = CARTESIAN_POINT('',(-0.332659657565,-0.58421032799)); +#39258 = VECTOR('',#39259,1.); +#39259 = DIRECTION('',(0.,1.)); +#39260 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39261 = PCURVE('',#38617,#39262); +#39262 = DEFINITIONAL_REPRESENTATION('',(#39263),#39267); +#39263 = LINE('',#39264,#39265); +#39264 = CARTESIAN_POINT('',(4.082776925422E-17,-0.41)); +#39265 = VECTOR('',#39266,1.); +#39266 = DIRECTION('',(1.,0.)); +#39267 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39268 = ORIENTED_EDGE('',*,*,#39269,.T.); +#39269 = EDGE_CURVE('',#39247,#39270,#39272,.T.); +#39270 = VERTEX_POINT('',#39271); +#39271 = CARTESIAN_POINT('',(-2.55,-0.43,0.3)); +#39272 = SURFACE_CURVE('',#39273,(#39278,#39289),.PCURVE_S1.); +#39273 = CIRCLE('',#39274,0.1); +#39274 = AXIS2_PLACEMENT_3D('',#39275,#39276,#39277); +#39275 = CARTESIAN_POINT('',(-2.65,-0.43,0.3)); +#39276 = DIRECTION('',(9.95799250103E-17,-1.,-0.)); +#39277 = DIRECTION('',(-0.,0.,-1.)); +#39278 = PCURVE('',#35964,#39279); +#39279 = DEFINITIONAL_REPRESENTATION('',(#39280),#39288); +#39280 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#39281,#39282,#39283,#39284 + ,#39285,#39286,#39287),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#39281 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#39282 = CARTESIAN_POINT('',(-0.332659657565,-6.100524723311E-02)); +#39283 = CARTESIAN_POINT('',(-0.182659657565,-0.147607787612)); +#39284 = CARTESIAN_POINT('',(-3.2659657565E-02,-0.23421032799)); +#39285 = CARTESIAN_POINT('',(-0.182659657565,-0.320812868368)); +#39286 = CARTESIAN_POINT('',(-0.332659657565,-0.407415408747)); +#39287 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#39288 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39289 = PCURVE('',#38650,#39290); +#39290 = DEFINITIONAL_REPRESENTATION('',(#39291),#39295); +#39291 = LINE('',#39292,#39293); +#39292 = CARTESIAN_POINT('',(0.,-0.41)); +#39293 = VECTOR('',#39294,1.); +#39294 = DIRECTION('',(1.,0.)); +#39295 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39296 = ORIENTED_EDGE('',*,*,#39297,.T.); +#39297 = EDGE_CURVE('',#39270,#39298,#39300,.T.); +#39298 = VERTEX_POINT('',#39299); +#39299 = CARTESIAN_POINT('',(-2.55,-0.43,0.725)); +#39300 = SURFACE_CURVE('',#39301,(#39305,#39312),.PCURVE_S1.); +#39301 = LINE('',#39302,#39303); +#39302 = CARTESIAN_POINT('',(-2.55,-0.43,0.3)); +#39303 = VECTOR('',#39304,1.); +#39304 = DIRECTION('',(0.,0.,1.)); +#39305 = PCURVE('',#35964,#39306); +#39306 = DEFINITIONAL_REPRESENTATION('',(#39307),#39311); +#39307 = LINE('',#39308,#39309); +#39308 = CARTESIAN_POINT('',(-0.232659657565,-0.13421032799)); +#39309 = VECTOR('',#39310,1.); +#39310 = DIRECTION('',(1.,0.)); +#39311 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39312 = PCURVE('',#38678,#39313); +#39313 = DEFINITIONAL_REPRESENTATION('',(#39314),#39318); +#39314 = LINE('',#39315,#39316); +#39315 = CARTESIAN_POINT('',(0.,-0.41)); +#39316 = VECTOR('',#39317,1.); +#39317 = DIRECTION('',(1.,0.)); +#39318 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39319 = ORIENTED_EDGE('',*,*,#39320,.T.); +#39320 = EDGE_CURVE('',#39298,#39321,#39323,.T.); +#39321 = VERTEX_POINT('',#39322); +#39322 = CARTESIAN_POINT('',(-2.25,-0.43,1.025)); +#39323 = SURFACE_CURVE('',#39324,(#39329,#39336),.PCURVE_S1.); +#39324 = CIRCLE('',#39325,0.3); +#39325 = AXIS2_PLACEMENT_3D('',#39326,#39327,#39328); +#39326 = CARTESIAN_POINT('',(-2.25,-0.43,0.725)); +#39327 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#39328 = DIRECTION('',(-1.,-9.95799250103E-17,3.700743415417E-16)); +#39329 = PCURVE('',#35964,#39330); +#39330 = DEFINITIONAL_REPRESENTATION('',(#39331),#39335); +#39331 = CIRCLE('',#39332,0.3); +#39332 = AXIS2_PLACEMENT_2D('',#39333,#39334); +#39333 = CARTESIAN_POINT('',(0.192340342435,0.16578967201)); +#39334 = DIRECTION('',(3.700743415417E-16,-1.)); +#39335 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39336 = PCURVE('',#38707,#39337); +#39337 = DEFINITIONAL_REPRESENTATION('',(#39338),#39342); +#39338 = LINE('',#39339,#39340); +#39339 = CARTESIAN_POINT('',(6.28318530718,-0.41)); +#39340 = VECTOR('',#39341,1.); +#39341 = DIRECTION('',(-1.,0.)); +#39342 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39343 = ORIENTED_EDGE('',*,*,#39344,.T.); +#39344 = EDGE_CURVE('',#39321,#36087,#39345,.T.); +#39345 = SURFACE_CURVE('',#39346,(#39350,#39357),.PCURVE_S1.); +#39346 = LINE('',#39347,#39348); +#39347 = CARTESIAN_POINT('',(-2.25,-0.43,1.025)); +#39348 = VECTOR('',#39349,1.); +#39349 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#39350 = PCURVE('',#35964,#39351); +#39351 = DEFINITIONAL_REPRESENTATION('',(#39352),#39356); +#39352 = LINE('',#39353,#39354); +#39353 = CARTESIAN_POINT('',(0.492340342435,0.16578967201)); +#39354 = VECTOR('',#39355,1.); +#39355 = DIRECTION('',(0.,1.)); +#39356 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39357 = PCURVE('',#36822,#39358); +#39358 = DEFINITIONAL_REPRESENTATION('',(#39359),#39363); +#39359 = LINE('',#39360,#39361); +#39360 = CARTESIAN_POINT('',(4.082776925422E-17,-0.41)); +#39361 = VECTOR('',#39362,1.); +#39362 = DIRECTION('',(1.,0.)); +#39363 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39364 = ADVANCED_FACE('',(#39365),#36021,.F.); +#39365 = FACE_BOUND('',#39366,.F.); +#39366 = EDGE_LOOP('',(#39367,#39368,#39369,#39397,#39420,#39444,#39467, + #39490,#39513,#39541,#39564,#39588)); +#39367 = ORIENTED_EDGE('',*,*,#36110,.F.); +#39368 = ORIENTED_EDGE('',*,*,#36005,.T.); +#39369 = ORIENTED_EDGE('',*,*,#39370,.T.); +#39370 = EDGE_CURVE('',#36006,#39371,#39373,.T.); +#39371 = VERTEX_POINT('',#39372); +#39372 = CARTESIAN_POINT('',(-2.35,0.43,0.725)); +#39373 = SURFACE_CURVE('',#39374,(#39379,#39390),.PCURVE_S1.); +#39374 = CIRCLE('',#39375,0.1); +#39375 = AXIS2_PLACEMENT_3D('',#39376,#39377,#39378); +#39376 = CARTESIAN_POINT('',(-2.25,0.43,0.725)); +#39377 = DIRECTION('',(9.95799250103E-17,-1.,0.)); +#39378 = DIRECTION('',(-4.440892098501E-15,-4.422237021476E-31,1.)); +#39379 = PCURVE('',#36021,#39380); +#39380 = DEFINITIONAL_REPRESENTATION('',(#39381),#39389); +#39381 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#39382,#39383,#39384,#39385 + ,#39386,#39387,#39388),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#39382 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#39383 = CARTESIAN_POINT('',(0.292340342435,-7.415408746888E-03)); +#39384 = CARTESIAN_POINT('',(0.142340342435,7.918713163156E-02)); +#39385 = CARTESIAN_POINT('',(-7.659657565E-03,0.16578967201)); +#39386 = CARTESIAN_POINT('',(0.142340342435,0.252392212388)); +#39387 = CARTESIAN_POINT('',(0.292340342435,0.338994752767)); +#39388 = CARTESIAN_POINT('',(0.292340342435,0.16578967201)); +#39389 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39390 = PCURVE('',#36071,#39391); +#39391 = DEFINITIONAL_REPRESENTATION('',(#39392),#39396); +#39392 = LINE('',#39393,#39394); +#39393 = CARTESIAN_POINT('',(0.,0.)); +#39394 = VECTOR('',#39395,1.); +#39395 = DIRECTION('',(1.,0.)); +#39396 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39397 = ORIENTED_EDGE('',*,*,#39398,.T.); +#39398 = EDGE_CURVE('',#39371,#39399,#39401,.T.); +#39399 = VERTEX_POINT('',#39400); +#39400 = CARTESIAN_POINT('',(-2.35,0.43,0.3)); +#39401 = SURFACE_CURVE('',#39402,(#39406,#39413),.PCURVE_S1.); +#39402 = LINE('',#39403,#39404); +#39403 = CARTESIAN_POINT('',(-2.35,0.43,0.725)); +#39404 = VECTOR('',#39405,1.); +#39405 = DIRECTION('',(-1.044915787883E-15,-1.040526357994E-31,-1.)); +#39406 = PCURVE('',#36021,#39407); +#39407 = DEFINITIONAL_REPRESENTATION('',(#39408),#39412); +#39408 = LINE('',#39409,#39410); +#39409 = CARTESIAN_POINT('',(0.192340342435,6.578967201E-02)); +#39410 = VECTOR('',#39411,1.); +#39411 = DIRECTION('',(-1.,-1.044915787883E-15)); +#39412 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39413 = PCURVE('',#38789,#39414); +#39414 = DEFINITIONAL_REPRESENTATION('',(#39415),#39419); +#39415 = LINE('',#39416,#39417); +#39416 = CARTESIAN_POINT('',(-0.,0.)); +#39417 = VECTOR('',#39418,1.); +#39418 = DIRECTION('',(1.,0.)); +#39419 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39420 = ORIENTED_EDGE('',*,*,#39421,.T.); +#39421 = EDGE_CURVE('',#39399,#39422,#39424,.T.); +#39422 = VERTEX_POINT('',#39423); +#39423 = CARTESIAN_POINT('',(-2.65,0.43,5.551115123126E-17)); +#39424 = SURFACE_CURVE('',#39425,(#39430,#39437),.PCURVE_S1.); +#39425 = CIRCLE('',#39426,0.3); +#39426 = AXIS2_PLACEMENT_3D('',#39427,#39428,#39429); +#39427 = CARTESIAN_POINT('',(-2.65,0.43,0.3)); +#39428 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#39429 = DIRECTION('',(1.,9.95799250103E-17,3.515706244646E-15)); +#39430 = PCURVE('',#36021,#39431); +#39431 = DEFINITIONAL_REPRESENTATION('',(#39432),#39436); +#39432 = CIRCLE('',#39433,0.3); +#39433 = AXIS2_PLACEMENT_2D('',#39434,#39435); +#39434 = CARTESIAN_POINT('',(-0.232659657565,-0.23421032799)); +#39435 = DIRECTION('',(3.515706244646E-15,1.)); +#39436 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39437 = PCURVE('',#38818,#39438); +#39438 = DEFINITIONAL_REPRESENTATION('',(#39439),#39443); +#39439 = LINE('',#39440,#39441); +#39440 = CARTESIAN_POINT('',(6.28318530718,0.)); +#39441 = VECTOR('',#39442,1.); +#39442 = DIRECTION('',(-1.,0.)); +#39443 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39444 = ORIENTED_EDGE('',*,*,#39445,.T.); +#39445 = EDGE_CURVE('',#39422,#39446,#39448,.T.); +#39446 = VERTEX_POINT('',#39447); +#39447 = CARTESIAN_POINT('',(-3.,0.43,5.551115123126E-17)); +#39448 = SURFACE_CURVE('',#39449,(#39453,#39460),.PCURVE_S1.); +#39449 = LINE('',#39450,#39451); +#39450 = CARTESIAN_POINT('',(-2.65,0.43,5.551115123126E-17)); +#39451 = VECTOR('',#39452,1.); +#39452 = DIRECTION('',(-1.,-9.95799250103E-17,0.)); +#39453 = PCURVE('',#36021,#39454); +#39454 = DEFINITIONAL_REPRESENTATION('',(#39455),#39459); +#39455 = LINE('',#39456,#39457); +#39456 = CARTESIAN_POINT('',(-0.532659657565,-0.23421032799)); +#39457 = VECTOR('',#39458,1.); +#39458 = DIRECTION('',(0.,-1.)); +#39459 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39460 = PCURVE('',#38846,#39461); +#39461 = DEFINITIONAL_REPRESENTATION('',(#39462),#39466); +#39462 = LINE('',#39463,#39464); +#39463 = CARTESIAN_POINT('',(0.,0.)); +#39464 = VECTOR('',#39465,1.); +#39465 = DIRECTION('',(1.,0.)); +#39466 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39467 = ORIENTED_EDGE('',*,*,#39468,.T.); +#39468 = EDGE_CURVE('',#39446,#39469,#39471,.T.); +#39469 = VERTEX_POINT('',#39470); +#39470 = CARTESIAN_POINT('',(-3.,0.43,0.2)); +#39471 = SURFACE_CURVE('',#39472,(#39476,#39483),.PCURVE_S1.); +#39472 = LINE('',#39473,#39474); +#39473 = CARTESIAN_POINT('',(-3.,0.43,5.551115123126E-17)); +#39474 = VECTOR('',#39475,1.); +#39475 = DIRECTION('',(0.,0.,1.)); +#39476 = PCURVE('',#36021,#39477); +#39477 = DEFINITIONAL_REPRESENTATION('',(#39478),#39482); +#39478 = LINE('',#39479,#39480); +#39479 = CARTESIAN_POINT('',(-0.532659657565,-0.58421032799)); +#39480 = VECTOR('',#39481,1.); +#39481 = DIRECTION('',(1.,0.)); +#39482 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39483 = PCURVE('',#38874,#39484); +#39484 = DEFINITIONAL_REPRESENTATION('',(#39485),#39489); +#39485 = LINE('',#39486,#39487); +#39486 = CARTESIAN_POINT('',(0.,0.)); +#39487 = VECTOR('',#39488,1.); +#39488 = DIRECTION('',(1.,0.)); +#39489 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39490 = ORIENTED_EDGE('',*,*,#39491,.T.); +#39491 = EDGE_CURVE('',#39469,#39492,#39494,.T.); +#39492 = VERTEX_POINT('',#39493); +#39493 = CARTESIAN_POINT('',(-2.65,0.43,0.2)); +#39494 = SURFACE_CURVE('',#39495,(#39499,#39506),.PCURVE_S1.); +#39495 = LINE('',#39496,#39497); +#39496 = CARTESIAN_POINT('',(-3.,0.43,0.2)); +#39497 = VECTOR('',#39498,1.); +#39498 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#39499 = PCURVE('',#36021,#39500); +#39500 = DEFINITIONAL_REPRESENTATION('',(#39501),#39505); +#39501 = LINE('',#39502,#39503); +#39502 = CARTESIAN_POINT('',(-0.332659657565,-0.58421032799)); +#39503 = VECTOR('',#39504,1.); +#39504 = DIRECTION('',(0.,1.)); +#39505 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39506 = PCURVE('',#38902,#39507); +#39507 = DEFINITIONAL_REPRESENTATION('',(#39508),#39512); +#39508 = LINE('',#39509,#39510); +#39509 = CARTESIAN_POINT('',(0.,0.)); +#39510 = VECTOR('',#39511,1.); +#39511 = DIRECTION('',(1.,0.)); +#39512 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39513 = ORIENTED_EDGE('',*,*,#39514,.T.); +#39514 = EDGE_CURVE('',#39492,#39515,#39517,.T.); +#39515 = VERTEX_POINT('',#39516); +#39516 = CARTESIAN_POINT('',(-2.55,0.43,0.3)); +#39517 = SURFACE_CURVE('',#39518,(#39523,#39534),.PCURVE_S1.); +#39518 = CIRCLE('',#39519,0.1); +#39519 = AXIS2_PLACEMENT_3D('',#39520,#39521,#39522); +#39520 = CARTESIAN_POINT('',(-2.65,0.43,0.3)); +#39521 = DIRECTION('',(9.95799250103E-17,-1.,-0.)); +#39522 = DIRECTION('',(-0.,0.,-1.)); +#39523 = PCURVE('',#36021,#39524); +#39524 = DEFINITIONAL_REPRESENTATION('',(#39525),#39533); +#39525 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#39526,#39527,#39528,#39529 + ,#39530,#39531,#39532),.UNSPECIFIED.,.T.,.F.) +B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(-2.094395102393,0., + 2.094395102393,4.188790204786,6.28318530718,8.377580409573), +.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() +RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM( + '') ); +#39526 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#39527 = CARTESIAN_POINT('',(-0.332659657565,-6.100524723311E-02)); +#39528 = CARTESIAN_POINT('',(-0.182659657565,-0.147607787612)); +#39529 = CARTESIAN_POINT('',(-3.2659657565E-02,-0.23421032799)); +#39530 = CARTESIAN_POINT('',(-0.182659657565,-0.320812868368)); +#39531 = CARTESIAN_POINT('',(-0.332659657565,-0.407415408747)); +#39532 = CARTESIAN_POINT('',(-0.332659657565,-0.23421032799)); +#39533 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39534 = PCURVE('',#38935,#39535); +#39535 = DEFINITIONAL_REPRESENTATION('',(#39536),#39540); +#39536 = LINE('',#39537,#39538); +#39537 = CARTESIAN_POINT('',(0.,0.)); +#39538 = VECTOR('',#39539,1.); +#39539 = DIRECTION('',(1.,0.)); +#39540 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39541 = ORIENTED_EDGE('',*,*,#39542,.T.); +#39542 = EDGE_CURVE('',#39515,#39543,#39545,.T.); +#39543 = VERTEX_POINT('',#39544); +#39544 = CARTESIAN_POINT('',(-2.55,0.43,0.725)); +#39545 = SURFACE_CURVE('',#39546,(#39550,#39557),.PCURVE_S1.); +#39546 = LINE('',#39547,#39548); +#39547 = CARTESIAN_POINT('',(-2.55,0.43,0.3)); +#39548 = VECTOR('',#39549,1.); +#39549 = DIRECTION('',(0.,0.,1.)); +#39550 = PCURVE('',#36021,#39551); +#39551 = DEFINITIONAL_REPRESENTATION('',(#39552),#39556); +#39552 = LINE('',#39553,#39554); +#39553 = CARTESIAN_POINT('',(-0.232659657565,-0.13421032799)); +#39554 = VECTOR('',#39555,1.); +#39555 = DIRECTION('',(1.,0.)); +#39556 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39557 = PCURVE('',#38963,#39558); +#39558 = DEFINITIONAL_REPRESENTATION('',(#39559),#39563); +#39559 = LINE('',#39560,#39561); +#39560 = CARTESIAN_POINT('',(0.,0.)); +#39561 = VECTOR('',#39562,1.); +#39562 = DIRECTION('',(1.,0.)); +#39563 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39564 = ORIENTED_EDGE('',*,*,#39565,.T.); +#39565 = EDGE_CURVE('',#39543,#39566,#39568,.T.); +#39566 = VERTEX_POINT('',#39567); +#39567 = CARTESIAN_POINT('',(-2.25,0.43,1.025)); +#39568 = SURFACE_CURVE('',#39569,(#39574,#39581),.PCURVE_S1.); +#39569 = CIRCLE('',#39570,0.3); +#39570 = AXIS2_PLACEMENT_3D('',#39571,#39572,#39573); +#39571 = CARTESIAN_POINT('',(-2.25,0.43,0.725)); +#39572 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#39573 = DIRECTION('',(-1.,-9.95799250103E-17,3.700743415417E-16)); +#39574 = PCURVE('',#36021,#39575); +#39575 = DEFINITIONAL_REPRESENTATION('',(#39576),#39580); +#39576 = CIRCLE('',#39577,0.3); +#39577 = AXIS2_PLACEMENT_2D('',#39578,#39579); +#39578 = CARTESIAN_POINT('',(0.192340342435,0.16578967201)); +#39579 = DIRECTION('',(3.700743415417E-16,-1.)); +#39580 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39581 = PCURVE('',#38992,#39582); +#39582 = DEFINITIONAL_REPRESENTATION('',(#39583),#39587); +#39583 = LINE('',#39584,#39585); +#39584 = CARTESIAN_POINT('',(6.28318530718,0.)); +#39585 = VECTOR('',#39586,1.); +#39586 = DIRECTION('',(-1.,0.)); +#39587 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39588 = ORIENTED_EDGE('',*,*,#39589,.T.); +#39589 = EDGE_CURVE('',#39566,#36111,#39590,.T.); +#39590 = SURFACE_CURVE('',#39591,(#39595,#39602),.PCURVE_S1.); +#39591 = LINE('',#39592,#39593); +#39592 = CARTESIAN_POINT('',(-2.25,0.43,1.025)); +#39593 = VECTOR('',#39594,1.); +#39594 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#39595 = PCURVE('',#36021,#39596); +#39596 = DEFINITIONAL_REPRESENTATION('',(#39597),#39601); +#39597 = LINE('',#39598,#39599); +#39598 = CARTESIAN_POINT('',(0.492340342435,0.16578967201)); +#39599 = VECTOR('',#39600,1.); +#39600 = DIRECTION('',(0.,1.)); +#39601 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39602 = PCURVE('',#36872,#39603); +#39603 = DEFINITIONAL_REPRESENTATION('',(#39604),#39608); +#39604 = LINE('',#39605,#39606); +#39605 = CARTESIAN_POINT('',(0.,0.)); +#39606 = VECTOR('',#39607,1.); +#39607 = DIRECTION('',(1.,0.)); +#39608 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39609 = ADVANCED_FACE('',(#39610),#36071,.F.); +#39610 = FACE_BOUND('',#39611,.F.); +#39611 = EDGE_LOOP('',(#39612,#39613,#39614,#39635)); +#39612 = ORIENTED_EDGE('',*,*,#36057,.T.); +#39613 = ORIENTED_EDGE('',*,*,#38745,.T.); +#39614 = ORIENTED_EDGE('',*,*,#39615,.F.); +#39615 = EDGE_CURVE('',#39371,#38746,#39616,.T.); +#39616 = SURFACE_CURVE('',#39617,(#39621,#39628),.PCURVE_S1.); +#39617 = LINE('',#39618,#39619); +#39618 = CARTESIAN_POINT('',(-2.35,0.43,0.725)); +#39619 = VECTOR('',#39620,1.); +#39620 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#39621 = PCURVE('',#36071,#39622); +#39622 = DEFINITIONAL_REPRESENTATION('',(#39623),#39627); +#39623 = LINE('',#39624,#39625); +#39624 = CARTESIAN_POINT('',(1.570796326795,0.)); +#39625 = VECTOR('',#39626,1.); +#39626 = DIRECTION('',(0.,-1.)); +#39627 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39628 = PCURVE('',#38789,#39629); +#39629 = DEFINITIONAL_REPRESENTATION('',(#39630),#39634); +#39630 = LINE('',#39631,#39632); +#39631 = CARTESIAN_POINT('',(-0.,0.)); +#39632 = VECTOR('',#39633,1.); +#39633 = DIRECTION('',(6.767833676919E-44,-1.)); +#39634 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39635 = ORIENTED_EDGE('',*,*,#39370,.F.); +#39636 = ADVANCED_FACE('',(#39637),#36147,.F.); +#39637 = FACE_BOUND('',#39638,.F.); +#39638 = EDGE_LOOP('',(#39639,#39659,#39660,#39680)); +#39639 = ORIENTED_EDGE('',*,*,#39640,.F.); +#39640 = EDGE_CURVE('',#36087,#36807,#39641,.T.); +#39641 = SURFACE_CURVE('',#39642,(#39646,#39652),.PCURVE_S1.); +#39642 = LINE('',#39643,#39644); +#39643 = CARTESIAN_POINT('',(-2.25,-0.43,1.025)); +#39644 = VECTOR('',#39645,1.); +#39645 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#39646 = PCURVE('',#36147,#39647); +#39647 = DEFINITIONAL_REPRESENTATION('',(#39648),#39651); +#39648 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#39649,#39650),.UNSPECIFIED., + .F.,.F.,(2,2),(0.3,0.375),.PIECEWISE_BEZIER_KNOTS.); +#39649 = CARTESIAN_POINT('',(1.845,3.104370344802E-17)); +#39650 = CARTESIAN_POINT('',(1.837793296089,1.)); +#39651 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39652 = PCURVE('',#36822,#39653); +#39653 = DEFINITIONAL_REPRESENTATION('',(#39654),#39658); +#39654 = LINE('',#39655,#39656); +#39655 = CARTESIAN_POINT('',(4.082776925422E-17,-0.41)); +#39656 = VECTOR('',#39657,1.); +#39657 = DIRECTION('',(1.,0.)); +#39658 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39659 = ORIENTED_EDGE('',*,*,#36133,.T.); +#39660 = ORIENTED_EDGE('',*,*,#39661,.T.); +#39661 = EDGE_CURVE('',#36111,#36835,#39662,.T.); +#39662 = SURFACE_CURVE('',#39663,(#39667,#39673),.PCURVE_S1.); +#39663 = LINE('',#39664,#39665); +#39664 = CARTESIAN_POINT('',(-2.25,0.43,1.025)); +#39665 = VECTOR('',#39666,1.); +#39666 = DIRECTION('',(1.,9.95799250103E-17,0.)); +#39667 = PCURVE('',#36147,#39668); +#39668 = DEFINITIONAL_REPRESENTATION('',(#39669),#39672); +#39669 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#39670,#39671),.UNSPECIFIED., + .F.,.F.,(2,2),(0.3,0.375),.PIECEWISE_BEZIER_KNOTS.); +#39670 = CARTESIAN_POINT('',(2.705,2.93089957531E-17)); +#39671 = CARTESIAN_POINT('',(2.712206703911,1.)); +#39672 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39673 = PCURVE('',#36872,#39674); +#39674 = DEFINITIONAL_REPRESENTATION('',(#39675),#39679); +#39675 = LINE('',#39676,#39677); +#39676 = CARTESIAN_POINT('',(0.,0.)); +#39677 = VECTOR('',#39678,1.); +#39678 = DIRECTION('',(1.,0.)); +#39679 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39680 = ORIENTED_EDGE('',*,*,#36834,.F.); +#39681 = ADVANCED_FACE('',(#39682),#36178,.F.); +#39682 = FACE_BOUND('',#39683,.F.); +#39683 = EDGE_LOOP('',(#39684,#39685,#39686,#39687)); +#39684 = ORIENTED_EDGE('',*,*,#36164,.T.); +#39685 = ORIENTED_EDGE('',*,*,#36636,.T.); +#39686 = ORIENTED_EDGE('',*,*,#36685,.F.); +#39687 = ORIENTED_EDGE('',*,*,#37822,.F.); +#39688 = ADVANCED_FACE('',(#39689),#36772,.F.); +#39689 = FACE_BOUND('',#39690,.F.); +#39690 = EDGE_LOOP('',(#39691,#39692,#39713,#39714,#39715,#39716)); +#39691 = ORIENTED_EDGE('',*,*,#37469,.F.); +#39692 = ORIENTED_EDGE('',*,*,#39693,.T.); +#39693 = EDGE_CURVE('',#37441,#38071,#39694,.T.); +#39694 = SURFACE_CURVE('',#39695,(#39699,#39706),.PCURVE_S1.); +#39695 = LINE('',#39696,#39697); +#39696 = CARTESIAN_POINT('',(-2.25,-2.11,1.025)); +#39697 = VECTOR('',#39698,1.); +#39698 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#39699 = PCURVE('',#36772,#39700); +#39700 = DEFINITIONAL_REPRESENTATION('',(#39701),#39705); +#39701 = LINE('',#39702,#39703); +#39702 = CARTESIAN_POINT('',(0.,0.)); +#39703 = VECTOR('',#39704,1.); +#39704 = DIRECTION('',(0.,-1.)); +#39705 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39706 = PCURVE('',#37457,#39707); +#39707 = DEFINITIONAL_REPRESENTATION('',(#39708),#39712); +#39708 = LINE('',#39709,#39710); +#39709 = CARTESIAN_POINT('',(4.712388980385,0.)); +#39710 = VECTOR('',#39711,1.); +#39711 = DIRECTION('',(0.,-1.)); +#39712 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39713 = ORIENTED_EDGE('',*,*,#38094,.T.); +#39714 = ORIENTED_EDGE('',*,*,#38390,.T.); +#39715 = ORIENTED_EDGE('',*,*,#36756,.F.); +#39716 = ORIENTED_EDGE('',*,*,#37161,.F.); +#39717 = ADVANCED_FACE('',(#39718),#36822,.F.); +#39718 = FACE_BOUND('',#39719,.F.); +#39719 = EDGE_LOOP('',(#39720,#39721,#39742,#39743,#39744,#39745)); +#39720 = ORIENTED_EDGE('',*,*,#38719,.F.); +#39721 = ORIENTED_EDGE('',*,*,#39722,.T.); +#39722 = EDGE_CURVE('',#38691,#39321,#39723,.T.); +#39723 = SURFACE_CURVE('',#39724,(#39728,#39735),.PCURVE_S1.); +#39724 = LINE('',#39725,#39726); +#39725 = CARTESIAN_POINT('',(-2.25,-0.84,1.025)); +#39726 = VECTOR('',#39727,1.); +#39727 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#39728 = PCURVE('',#36822,#39729); +#39729 = DEFINITIONAL_REPRESENTATION('',(#39730),#39734); +#39730 = LINE('',#39731,#39732); +#39731 = CARTESIAN_POINT('',(0.,0.)); +#39732 = VECTOR('',#39733,1.); +#39733 = DIRECTION('',(0.,-1.)); +#39734 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39735 = PCURVE('',#38707,#39736); +#39736 = DEFINITIONAL_REPRESENTATION('',(#39737),#39741); +#39737 = LINE('',#39738,#39739); +#39738 = CARTESIAN_POINT('',(4.712388980385,0.)); +#39739 = VECTOR('',#39740,1.); +#39740 = DIRECTION('',(0.,-1.)); +#39741 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39742 = ORIENTED_EDGE('',*,*,#39344,.T.); +#39743 = ORIENTED_EDGE('',*,*,#39640,.T.); +#39744 = ORIENTED_EDGE('',*,*,#36806,.F.); +#39745 = ORIENTED_EDGE('',*,*,#38434,.F.); +#39746 = ADVANCED_FACE('',(#39747),#36922,.F.); +#39747 = FACE_BOUND('',#39748,.F.); +#39748 = EDGE_LOOP('',(#39749,#39750,#39771,#39772,#39773,#39774)); +#39749 = ORIENTED_EDGE('',*,*,#38339,.F.); +#39750 = ORIENTED_EDGE('',*,*,#39751,.T.); +#39751 = EDGE_CURVE('',#38316,#37726,#39752,.T.); +#39752 = SURFACE_CURVE('',#39753,(#39757,#39764),.PCURVE_S1.); +#39753 = LINE('',#39754,#39755); +#39754 = CARTESIAN_POINT('',(-2.25,1.7,1.025)); +#39755 = VECTOR('',#39756,1.); +#39756 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#39757 = PCURVE('',#36922,#39758); +#39758 = DEFINITIONAL_REPRESENTATION('',(#39759),#39763); +#39759 = LINE('',#39760,#39761); +#39760 = CARTESIAN_POINT('',(0.,0.)); +#39761 = VECTOR('',#39762,1.); +#39762 = DIRECTION('',(0.,-1.)); +#39763 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39764 = PCURVE('',#37742,#39765); +#39765 = DEFINITIONAL_REPRESENTATION('',(#39766),#39770); +#39766 = LINE('',#39767,#39768); +#39767 = CARTESIAN_POINT('',(4.712388980385,0.)); +#39768 = VECTOR('',#39769,1.); +#39769 = DIRECTION('',(0.,-1.)); +#39770 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39771 = ORIENTED_EDGE('',*,*,#37754,.T.); +#39772 = ORIENTED_EDGE('',*,*,#37778,.T.); +#39773 = ORIENTED_EDGE('',*,*,#36906,.F.); +#39774 = ORIENTED_EDGE('',*,*,#39049,.F.); +#39775 = ADVANCED_FACE('',(#39776),#36872,.F.); +#39776 = FACE_BOUND('',#39777,.F.); +#39777 = EDGE_LOOP('',(#39778,#39779,#39800,#39801,#39802,#39803)); +#39778 = ORIENTED_EDGE('',*,*,#39589,.F.); +#39779 = ORIENTED_EDGE('',*,*,#39780,.T.); +#39780 = EDGE_CURVE('',#39566,#38976,#39781,.T.); +#39781 = SURFACE_CURVE('',#39782,(#39786,#39793),.PCURVE_S1.); +#39782 = LINE('',#39783,#39784); +#39783 = CARTESIAN_POINT('',(-2.25,0.43,1.025)); +#39784 = VECTOR('',#39785,1.); +#39785 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#39786 = PCURVE('',#36872,#39787); +#39787 = DEFINITIONAL_REPRESENTATION('',(#39788),#39792); +#39788 = LINE('',#39789,#39790); +#39789 = CARTESIAN_POINT('',(0.,0.)); +#39790 = VECTOR('',#39791,1.); +#39791 = DIRECTION('',(0.,-1.)); +#39792 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39793 = PCURVE('',#38992,#39794); +#39794 = DEFINITIONAL_REPRESENTATION('',(#39795),#39799); +#39795 = LINE('',#39796,#39797); +#39796 = CARTESIAN_POINT('',(4.712388980385,0.)); +#39797 = VECTOR('',#39798,1.); +#39798 = DIRECTION('',(0.,-1.)); +#39799 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39800 = ORIENTED_EDGE('',*,*,#39004,.T.); +#39801 = ORIENTED_EDGE('',*,*,#39028,.T.); +#39802 = ORIENTED_EDGE('',*,*,#36856,.F.); +#39803 = ORIENTED_EDGE('',*,*,#39661,.F.); +#39804 = ADVANCED_FACE('',(#39805),#37069,.T.); +#39805 = FACE_BOUND('',#39806,.T.); +#39806 = EDGE_LOOP('',(#39807)); +#39807 = ORIENTED_EDGE('',*,*,#37052,.T.); +#39808 = ADVANCED_FACE('',(#39809),#37457,.T.); +#39809 = FACE_BOUND('',#39810,.T.); +#39810 = EDGE_LOOP('',(#39811,#39812,#39813,#39814)); +#39811 = ORIENTED_EDGE('',*,*,#37440,.T.); +#39812 = ORIENTED_EDGE('',*,*,#39693,.T.); +#39813 = ORIENTED_EDGE('',*,*,#38070,.F.); +#39814 = ORIENTED_EDGE('',*,*,#39815,.F.); +#39815 = EDGE_CURVE('',#37413,#38048,#39816,.T.); +#39816 = SURFACE_CURVE('',#39817,(#39821,#39828),.PCURVE_S1.); +#39817 = LINE('',#39818,#39819); +#39818 = CARTESIAN_POINT('',(-2.55,-2.11,0.725)); +#39819 = VECTOR('',#39820,1.); +#39820 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#39821 = PCURVE('',#37457,#39822); +#39822 = DEFINITIONAL_REPRESENTATION('',(#39823),#39827); +#39823 = LINE('',#39824,#39825); +#39824 = CARTESIAN_POINT('',(6.28318530718,0.)); +#39825 = VECTOR('',#39826,1.); +#39826 = DIRECTION('',(0.,-1.)); +#39827 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39828 = PCURVE('',#37428,#39829); +#39829 = DEFINITIONAL_REPRESENTATION('',(#39830),#39834); +#39830 = LINE('',#39831,#39832); +#39831 = CARTESIAN_POINT('',(0.425,0.)); +#39832 = VECTOR('',#39833,1.); +#39833 = DIRECTION('',(0.,-1.)); +#39834 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39835 = ADVANCED_FACE('',(#39836),#37428,.F.); +#39836 = FACE_BOUND('',#39837,.F.); +#39837 = EDGE_LOOP('',(#39838,#39859,#39860,#39861)); +#39838 = ORIENTED_EDGE('',*,*,#39839,.T.); +#39839 = EDGE_CURVE('',#37380,#38020,#39840,.T.); +#39840 = SURFACE_CURVE('',#39841,(#39845,#39852),.PCURVE_S1.); +#39841 = LINE('',#39842,#39843); +#39842 = CARTESIAN_POINT('',(-2.55,-2.11,0.3)); +#39843 = VECTOR('',#39844,1.); +#39844 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#39845 = PCURVE('',#37428,#39846); +#39846 = DEFINITIONAL_REPRESENTATION('',(#39847),#39851); +#39847 = LINE('',#39848,#39849); +#39848 = CARTESIAN_POINT('',(0.,0.)); +#39849 = VECTOR('',#39850,1.); +#39850 = DIRECTION('',(0.,-1.)); +#39851 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39852 = PCURVE('',#37400,#39853); +#39853 = DEFINITIONAL_REPRESENTATION('',(#39854),#39858); +#39854 = LINE('',#39855,#39856); +#39855 = CARTESIAN_POINT('',(1.570796326795,0.)); +#39856 = VECTOR('',#39857,1.); +#39857 = DIRECTION('',(0.,-1.)); +#39858 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39859 = ORIENTED_EDGE('',*,*,#38047,.T.); +#39860 = ORIENTED_EDGE('',*,*,#39815,.F.); +#39861 = ORIENTED_EDGE('',*,*,#37412,.F.); +#39862 = ADVANCED_FACE('',(#39863),#37400,.F.); +#39863 = FACE_BOUND('',#39864,.F.); +#39864 = EDGE_LOOP('',(#39865,#39886,#39887,#39888)); +#39865 = ORIENTED_EDGE('',*,*,#39866,.T.); +#39866 = EDGE_CURVE('',#37352,#37997,#39867,.T.); +#39867 = SURFACE_CURVE('',#39868,(#39872,#39879),.PCURVE_S1.); +#39868 = LINE('',#39869,#39870); +#39869 = CARTESIAN_POINT('',(-2.65,-2.11,0.2)); +#39870 = VECTOR('',#39871,1.); +#39871 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#39872 = PCURVE('',#37400,#39873); +#39873 = DEFINITIONAL_REPRESENTATION('',(#39874),#39878); +#39874 = LINE('',#39875,#39876); +#39875 = CARTESIAN_POINT('',(0.,0.)); +#39876 = VECTOR('',#39877,1.); +#39877 = DIRECTION('',(0.,-1.)); +#39878 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39879 = PCURVE('',#37367,#39880); +#39880 = DEFINITIONAL_REPRESENTATION('',(#39881),#39885); +#39881 = LINE('',#39882,#39883); +#39882 = CARTESIAN_POINT('',(0.35,3.485297375361E-17)); +#39883 = VECTOR('',#39884,1.); +#39884 = DIRECTION('',(0.,-1.)); +#39885 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39886 = ORIENTED_EDGE('',*,*,#38019,.T.); +#39887 = ORIENTED_EDGE('',*,*,#39839,.F.); +#39888 = ORIENTED_EDGE('',*,*,#37379,.F.); +#39889 = ADVANCED_FACE('',(#39890),#37367,.F.); +#39890 = FACE_BOUND('',#39891,.F.); +#39891 = EDGE_LOOP('',(#39892,#39913,#39914,#39915)); +#39892 = ORIENTED_EDGE('',*,*,#39893,.T.); +#39893 = EDGE_CURVE('',#37324,#37974,#39894,.T.); +#39894 = SURFACE_CURVE('',#39895,(#39899,#39906),.PCURVE_S1.); +#39895 = LINE('',#39896,#39897); +#39896 = CARTESIAN_POINT('',(-3.,-2.11,0.2)); +#39897 = VECTOR('',#39898,1.); +#39898 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#39899 = PCURVE('',#37367,#39900); +#39900 = DEFINITIONAL_REPRESENTATION('',(#39901),#39905); +#39901 = LINE('',#39902,#39903); +#39902 = CARTESIAN_POINT('',(0.,0.)); +#39903 = VECTOR('',#39904,1.); +#39904 = DIRECTION('',(0.,-1.)); +#39905 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39906 = PCURVE('',#37339,#39907); +#39907 = DEFINITIONAL_REPRESENTATION('',(#39908),#39912); +#39908 = LINE('',#39909,#39910); +#39909 = CARTESIAN_POINT('',(0.2,0.)); +#39910 = VECTOR('',#39911,1.); +#39911 = DIRECTION('',(0.,-1.)); +#39912 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39913 = ORIENTED_EDGE('',*,*,#37996,.T.); +#39914 = ORIENTED_EDGE('',*,*,#39866,.F.); +#39915 = ORIENTED_EDGE('',*,*,#37351,.F.); +#39916 = ADVANCED_FACE('',(#39917),#37339,.F.); +#39917 = FACE_BOUND('',#39918,.F.); +#39918 = EDGE_LOOP('',(#39919,#39940,#39941,#39942)); +#39919 = ORIENTED_EDGE('',*,*,#39920,.T.); +#39920 = EDGE_CURVE('',#37296,#37951,#39921,.T.); +#39921 = SURFACE_CURVE('',#39922,(#39926,#39933),.PCURVE_S1.); +#39922 = LINE('',#39923,#39924); +#39923 = CARTESIAN_POINT('',(-3.,-2.11,5.551115123126E-17)); +#39924 = VECTOR('',#39925,1.); +#39925 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#39926 = PCURVE('',#37339,#39927); +#39927 = DEFINITIONAL_REPRESENTATION('',(#39928),#39932); +#39928 = LINE('',#39929,#39930); +#39929 = CARTESIAN_POINT('',(0.,0.)); +#39930 = VECTOR('',#39931,1.); +#39931 = DIRECTION('',(0.,-1.)); +#39932 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39933 = PCURVE('',#37311,#39934); +#39934 = DEFINITIONAL_REPRESENTATION('',(#39935),#39939); +#39935 = LINE('',#39936,#39937); +#39936 = CARTESIAN_POINT('',(0.35,-3.485297375361E-17)); +#39937 = VECTOR('',#39938,1.); +#39938 = DIRECTION('',(0.,-1.)); +#39939 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39940 = ORIENTED_EDGE('',*,*,#37973,.T.); +#39941 = ORIENTED_EDGE('',*,*,#39893,.F.); +#39942 = ORIENTED_EDGE('',*,*,#37323,.F.); +#39943 = ADVANCED_FACE('',(#39944),#37311,.F.); +#39944 = FACE_BOUND('',#39945,.F.); +#39945 = EDGE_LOOP('',(#39946,#39967,#39968,#39969)); +#39946 = ORIENTED_EDGE('',*,*,#39947,.T.); +#39947 = EDGE_CURVE('',#37267,#37927,#39948,.T.); +#39948 = SURFACE_CURVE('',#39949,(#39953,#39960),.PCURVE_S1.); +#39949 = LINE('',#39950,#39951); +#39950 = CARTESIAN_POINT('',(-2.65,-2.11,5.551115123126E-17)); +#39951 = VECTOR('',#39952,1.); +#39952 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#39953 = PCURVE('',#37311,#39954); +#39954 = DEFINITIONAL_REPRESENTATION('',(#39955),#39959); +#39955 = LINE('',#39956,#39957); +#39956 = CARTESIAN_POINT('',(0.,0.)); +#39957 = VECTOR('',#39958,1.); +#39958 = DIRECTION('',(0.,-1.)); +#39959 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39960 = PCURVE('',#37283,#39961); +#39961 = DEFINITIONAL_REPRESENTATION('',(#39962),#39966); +#39962 = LINE('',#39963,#39964); +#39963 = CARTESIAN_POINT('',(4.712388980385,0.)); +#39964 = VECTOR('',#39965,1.); +#39965 = DIRECTION('',(0.,-1.)); +#39966 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39967 = ORIENTED_EDGE('',*,*,#37950,.T.); +#39968 = ORIENTED_EDGE('',*,*,#39920,.F.); +#39969 = ORIENTED_EDGE('',*,*,#37295,.F.); +#39970 = ADVANCED_FACE('',(#39971),#37283,.T.); +#39971 = FACE_BOUND('',#39972,.T.); +#39972 = EDGE_LOOP('',(#39973,#39974,#39975,#39976)); +#39973 = ORIENTED_EDGE('',*,*,#37266,.T.); +#39974 = ORIENTED_EDGE('',*,*,#39947,.T.); +#39975 = ORIENTED_EDGE('',*,*,#37926,.F.); +#39976 = ORIENTED_EDGE('',*,*,#39977,.F.); +#39977 = EDGE_CURVE('',#37239,#37904,#39978,.T.); +#39978 = SURFACE_CURVE('',#39979,(#39983,#39990),.PCURVE_S1.); +#39979 = LINE('',#39980,#39981); +#39980 = CARTESIAN_POINT('',(-2.35,-2.11,0.3)); +#39981 = VECTOR('',#39982,1.); +#39982 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#39983 = PCURVE('',#37283,#39984); +#39984 = DEFINITIONAL_REPRESENTATION('',(#39985),#39989); +#39985 = LINE('',#39986,#39987); +#39986 = CARTESIAN_POINT('',(6.28318530718,0.)); +#39987 = VECTOR('',#39988,1.); +#39988 = DIRECTION('',(0.,-1.)); +#39989 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39990 = PCURVE('',#37254,#39991); +#39991 = DEFINITIONAL_REPRESENTATION('',(#39992),#39996); +#39992 = LINE('',#39993,#39994); +#39993 = CARTESIAN_POINT('',(0.425,-4.422237021472E-32)); +#39994 = VECTOR('',#39995,1.); +#39995 = DIRECTION('',(6.767833676919E-44,-1.)); +#39996 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#39997 = ADVANCED_FACE('',(#39998),#37254,.F.); +#39998 = FACE_BOUND('',#39999,.F.); +#39999 = EDGE_LOOP('',(#40000,#40001,#40002,#40003)); +#40000 = ORIENTED_EDGE('',*,*,#37875,.T.); +#40001 = ORIENTED_EDGE('',*,*,#37903,.T.); +#40002 = ORIENTED_EDGE('',*,*,#39977,.F.); +#40003 = ORIENTED_EDGE('',*,*,#37238,.F.); +#40004 = ADVANCED_FACE('',(#40005),#37742,.T.); +#40005 = FACE_BOUND('',#40006,.T.); +#40006 = EDGE_LOOP('',(#40007,#40008,#40009,#40010)); +#40007 = ORIENTED_EDGE('',*,*,#38315,.T.); +#40008 = ORIENTED_EDGE('',*,*,#39751,.T.); +#40009 = ORIENTED_EDGE('',*,*,#37725,.F.); +#40010 = ORIENTED_EDGE('',*,*,#40011,.F.); +#40011 = EDGE_CURVE('',#38293,#37698,#40012,.T.); +#40012 = SURFACE_CURVE('',#40013,(#40017,#40024),.PCURVE_S1.); +#40013 = LINE('',#40014,#40015); +#40014 = CARTESIAN_POINT('',(-2.55,1.7,0.725)); +#40015 = VECTOR('',#40016,1.); +#40016 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#40017 = PCURVE('',#37742,#40018); +#40018 = DEFINITIONAL_REPRESENTATION('',(#40019),#40023); +#40019 = LINE('',#40020,#40021); +#40020 = CARTESIAN_POINT('',(6.28318530718,0.)); +#40021 = VECTOR('',#40022,1.); +#40022 = DIRECTION('',(0.,-1.)); +#40023 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40024 = PCURVE('',#37713,#40025); +#40025 = DEFINITIONAL_REPRESENTATION('',(#40026),#40030); +#40026 = LINE('',#40027,#40028); +#40027 = CARTESIAN_POINT('',(0.425,0.)); +#40028 = VECTOR('',#40029,1.); +#40029 = DIRECTION('',(0.,-1.)); +#40030 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40031 = ADVANCED_FACE('',(#40032),#37713,.F.); +#40032 = FACE_BOUND('',#40033,.F.); +#40033 = EDGE_LOOP('',(#40034,#40055,#40056,#40057)); +#40034 = ORIENTED_EDGE('',*,*,#40035,.T.); +#40035 = EDGE_CURVE('',#38265,#37665,#40036,.T.); +#40036 = SURFACE_CURVE('',#40037,(#40041,#40048),.PCURVE_S1.); +#40037 = LINE('',#40038,#40039); +#40038 = CARTESIAN_POINT('',(-2.55,1.7,0.3)); +#40039 = VECTOR('',#40040,1.); +#40040 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#40041 = PCURVE('',#37713,#40042); +#40042 = DEFINITIONAL_REPRESENTATION('',(#40043),#40047); +#40043 = LINE('',#40044,#40045); +#40044 = CARTESIAN_POINT('',(0.,0.)); +#40045 = VECTOR('',#40046,1.); +#40046 = DIRECTION('',(0.,-1.)); +#40047 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40048 = PCURVE('',#37685,#40049); +#40049 = DEFINITIONAL_REPRESENTATION('',(#40050),#40054); +#40050 = LINE('',#40051,#40052); +#40051 = CARTESIAN_POINT('',(1.570796326795,0.)); +#40052 = VECTOR('',#40053,1.); +#40053 = DIRECTION('',(0.,-1.)); +#40054 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40055 = ORIENTED_EDGE('',*,*,#37697,.T.); +#40056 = ORIENTED_EDGE('',*,*,#40011,.F.); +#40057 = ORIENTED_EDGE('',*,*,#38292,.F.); +#40058 = ADVANCED_FACE('',(#40059),#37685,.F.); +#40059 = FACE_BOUND('',#40060,.F.); +#40060 = EDGE_LOOP('',(#40061,#40082,#40083,#40084)); +#40061 = ORIENTED_EDGE('',*,*,#40062,.T.); +#40062 = EDGE_CURVE('',#38242,#37637,#40063,.T.); +#40063 = SURFACE_CURVE('',#40064,(#40068,#40075),.PCURVE_S1.); +#40064 = LINE('',#40065,#40066); +#40065 = CARTESIAN_POINT('',(-2.65,1.7,0.2)); +#40066 = VECTOR('',#40067,1.); +#40067 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#40068 = PCURVE('',#37685,#40069); +#40069 = DEFINITIONAL_REPRESENTATION('',(#40070),#40074); +#40070 = LINE('',#40071,#40072); +#40071 = CARTESIAN_POINT('',(0.,0.)); +#40072 = VECTOR('',#40073,1.); +#40073 = DIRECTION('',(0.,-1.)); +#40074 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40075 = PCURVE('',#37652,#40076); +#40076 = DEFINITIONAL_REPRESENTATION('',(#40077),#40081); +#40077 = LINE('',#40078,#40079); +#40078 = CARTESIAN_POINT('',(0.35,3.485297375361E-17)); +#40079 = VECTOR('',#40080,1.); +#40080 = DIRECTION('',(0.,-1.)); +#40081 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40082 = ORIENTED_EDGE('',*,*,#37664,.T.); +#40083 = ORIENTED_EDGE('',*,*,#40035,.F.); +#40084 = ORIENTED_EDGE('',*,*,#38264,.F.); +#40085 = ADVANCED_FACE('',(#40086),#37652,.F.); +#40086 = FACE_BOUND('',#40087,.F.); +#40087 = EDGE_LOOP('',(#40088,#40109,#40110,#40111)); +#40088 = ORIENTED_EDGE('',*,*,#40089,.T.); +#40089 = EDGE_CURVE('',#38219,#37609,#40090,.T.); +#40090 = SURFACE_CURVE('',#40091,(#40095,#40102),.PCURVE_S1.); +#40091 = LINE('',#40092,#40093); +#40092 = CARTESIAN_POINT('',(-3.,1.7,0.2)); +#40093 = VECTOR('',#40094,1.); +#40094 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#40095 = PCURVE('',#37652,#40096); +#40096 = DEFINITIONAL_REPRESENTATION('',(#40097),#40101); +#40097 = LINE('',#40098,#40099); +#40098 = CARTESIAN_POINT('',(0.,0.)); +#40099 = VECTOR('',#40100,1.); +#40100 = DIRECTION('',(0.,-1.)); +#40101 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40102 = PCURVE('',#37624,#40103); +#40103 = DEFINITIONAL_REPRESENTATION('',(#40104),#40108); +#40104 = LINE('',#40105,#40106); +#40105 = CARTESIAN_POINT('',(0.2,0.)); +#40106 = VECTOR('',#40107,1.); +#40107 = DIRECTION('',(0.,-1.)); +#40108 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40109 = ORIENTED_EDGE('',*,*,#37636,.T.); +#40110 = ORIENTED_EDGE('',*,*,#40062,.F.); +#40111 = ORIENTED_EDGE('',*,*,#38241,.F.); +#40112 = ADVANCED_FACE('',(#40113),#37624,.F.); +#40113 = FACE_BOUND('',#40114,.F.); +#40114 = EDGE_LOOP('',(#40115,#40136,#40137,#40138)); +#40115 = ORIENTED_EDGE('',*,*,#40116,.T.); +#40116 = EDGE_CURVE('',#38196,#37581,#40117,.T.); +#40117 = SURFACE_CURVE('',#40118,(#40122,#40129),.PCURVE_S1.); +#40118 = LINE('',#40119,#40120); +#40119 = CARTESIAN_POINT('',(-3.,1.7,5.551115123126E-17)); +#40120 = VECTOR('',#40121,1.); +#40121 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#40122 = PCURVE('',#37624,#40123); +#40123 = DEFINITIONAL_REPRESENTATION('',(#40124),#40128); +#40124 = LINE('',#40125,#40126); +#40125 = CARTESIAN_POINT('',(0.,0.)); +#40126 = VECTOR('',#40127,1.); +#40127 = DIRECTION('',(0.,-1.)); +#40128 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40129 = PCURVE('',#37596,#40130); +#40130 = DEFINITIONAL_REPRESENTATION('',(#40131),#40135); +#40131 = LINE('',#40132,#40133); +#40132 = CARTESIAN_POINT('',(0.35,-3.485297375361E-17)); +#40133 = VECTOR('',#40134,1.); +#40134 = DIRECTION('',(0.,-1.)); +#40135 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40136 = ORIENTED_EDGE('',*,*,#37608,.T.); +#40137 = ORIENTED_EDGE('',*,*,#40089,.F.); +#40138 = ORIENTED_EDGE('',*,*,#38218,.F.); +#40139 = ADVANCED_FACE('',(#40140),#37596,.F.); +#40140 = FACE_BOUND('',#40141,.F.); +#40141 = EDGE_LOOP('',(#40142,#40163,#40164,#40165)); +#40142 = ORIENTED_EDGE('',*,*,#40143,.T.); +#40143 = EDGE_CURVE('',#38172,#37552,#40144,.T.); +#40144 = SURFACE_CURVE('',#40145,(#40149,#40156),.PCURVE_S1.); +#40145 = LINE('',#40146,#40147); +#40146 = CARTESIAN_POINT('',(-2.65,1.7,5.551115123126E-17)); +#40147 = VECTOR('',#40148,1.); +#40148 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#40149 = PCURVE('',#37596,#40150); +#40150 = DEFINITIONAL_REPRESENTATION('',(#40151),#40155); +#40151 = LINE('',#40152,#40153); +#40152 = CARTESIAN_POINT('',(0.,0.)); +#40153 = VECTOR('',#40154,1.); +#40154 = DIRECTION('',(0.,-1.)); +#40155 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40156 = PCURVE('',#37568,#40157); +#40157 = DEFINITIONAL_REPRESENTATION('',(#40158),#40162); +#40158 = LINE('',#40159,#40160); +#40159 = CARTESIAN_POINT('',(4.712388980385,0.)); +#40160 = VECTOR('',#40161,1.); +#40161 = DIRECTION('',(0.,-1.)); +#40162 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40163 = ORIENTED_EDGE('',*,*,#37580,.T.); +#40164 = ORIENTED_EDGE('',*,*,#40116,.F.); +#40165 = ORIENTED_EDGE('',*,*,#38195,.F.); +#40166 = ADVANCED_FACE('',(#40167),#37568,.T.); +#40167 = FACE_BOUND('',#40168,.T.); +#40168 = EDGE_LOOP('',(#40169,#40170,#40171,#40172)); +#40169 = ORIENTED_EDGE('',*,*,#38171,.T.); +#40170 = ORIENTED_EDGE('',*,*,#40143,.T.); +#40171 = ORIENTED_EDGE('',*,*,#37551,.F.); +#40172 = ORIENTED_EDGE('',*,*,#40173,.F.); +#40173 = EDGE_CURVE('',#38149,#37524,#40174,.T.); +#40174 = SURFACE_CURVE('',#40175,(#40179,#40186),.PCURVE_S1.); +#40175 = LINE('',#40176,#40177); +#40176 = CARTESIAN_POINT('',(-2.35,1.7,0.3)); +#40177 = VECTOR('',#40178,1.); +#40178 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#40179 = PCURVE('',#37568,#40180); +#40180 = DEFINITIONAL_REPRESENTATION('',(#40181),#40185); +#40181 = LINE('',#40182,#40183); +#40182 = CARTESIAN_POINT('',(6.28318530718,0.)); +#40183 = VECTOR('',#40184,1.); +#40184 = DIRECTION('',(0.,-1.)); +#40185 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40186 = PCURVE('',#37539,#40187); +#40187 = DEFINITIONAL_REPRESENTATION('',(#40188),#40192); +#40188 = LINE('',#40189,#40190); +#40189 = CARTESIAN_POINT('',(0.425,-4.422237021472E-32)); +#40190 = VECTOR('',#40191,1.); +#40191 = DIRECTION('',(6.767833676919E-44,-1.)); +#40192 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40193 = ADVANCED_FACE('',(#40194),#37539,.F.); +#40194 = FACE_BOUND('',#40195,.F.); +#40195 = EDGE_LOOP('',(#40196,#40197,#40198,#40199)); +#40196 = ORIENTED_EDGE('',*,*,#38365,.T.); +#40197 = ORIENTED_EDGE('',*,*,#37523,.T.); +#40198 = ORIENTED_EDGE('',*,*,#40173,.F.); +#40199 = ORIENTED_EDGE('',*,*,#38148,.F.); +#40200 = ADVANCED_FACE('',(#40201),#38707,.T.); +#40201 = FACE_BOUND('',#40202,.T.); +#40202 = EDGE_LOOP('',(#40203,#40204,#40205,#40206)); +#40203 = ORIENTED_EDGE('',*,*,#38690,.T.); +#40204 = ORIENTED_EDGE('',*,*,#39722,.T.); +#40205 = ORIENTED_EDGE('',*,*,#39320,.F.); +#40206 = ORIENTED_EDGE('',*,*,#40207,.F.); +#40207 = EDGE_CURVE('',#38663,#39298,#40208,.T.); +#40208 = SURFACE_CURVE('',#40209,(#40213,#40220),.PCURVE_S1.); +#40209 = LINE('',#40210,#40211); +#40210 = CARTESIAN_POINT('',(-2.55,-0.84,0.725)); +#40211 = VECTOR('',#40212,1.); +#40212 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#40213 = PCURVE('',#38707,#40214); +#40214 = DEFINITIONAL_REPRESENTATION('',(#40215),#40219); +#40215 = LINE('',#40216,#40217); +#40216 = CARTESIAN_POINT('',(6.28318530718,0.)); +#40217 = VECTOR('',#40218,1.); +#40218 = DIRECTION('',(0.,-1.)); +#40219 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40220 = PCURVE('',#38678,#40221); +#40221 = DEFINITIONAL_REPRESENTATION('',(#40222),#40226); +#40222 = LINE('',#40223,#40224); +#40223 = CARTESIAN_POINT('',(0.425,0.)); +#40224 = VECTOR('',#40225,1.); +#40225 = DIRECTION('',(0.,-1.)); +#40226 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40227 = ADVANCED_FACE('',(#40228),#38678,.F.); +#40228 = FACE_BOUND('',#40229,.F.); +#40229 = EDGE_LOOP('',(#40230,#40251,#40252,#40253)); +#40230 = ORIENTED_EDGE('',*,*,#40231,.T.); +#40231 = EDGE_CURVE('',#38630,#39270,#40232,.T.); +#40232 = SURFACE_CURVE('',#40233,(#40237,#40244),.PCURVE_S1.); +#40233 = LINE('',#40234,#40235); +#40234 = CARTESIAN_POINT('',(-2.55,-0.84,0.3)); +#40235 = VECTOR('',#40236,1.); +#40236 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#40237 = PCURVE('',#38678,#40238); +#40238 = DEFINITIONAL_REPRESENTATION('',(#40239),#40243); +#40239 = LINE('',#40240,#40241); +#40240 = CARTESIAN_POINT('',(0.,0.)); +#40241 = VECTOR('',#40242,1.); +#40242 = DIRECTION('',(0.,-1.)); +#40243 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40244 = PCURVE('',#38650,#40245); +#40245 = DEFINITIONAL_REPRESENTATION('',(#40246),#40250); +#40246 = LINE('',#40247,#40248); +#40247 = CARTESIAN_POINT('',(1.570796326795,0.)); +#40248 = VECTOR('',#40249,1.); +#40249 = DIRECTION('',(0.,-1.)); +#40250 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40251 = ORIENTED_EDGE('',*,*,#39297,.T.); +#40252 = ORIENTED_EDGE('',*,*,#40207,.F.); +#40253 = ORIENTED_EDGE('',*,*,#38662,.F.); +#40254 = ADVANCED_FACE('',(#40255),#38650,.F.); +#40255 = FACE_BOUND('',#40256,.F.); +#40256 = EDGE_LOOP('',(#40257,#40278,#40279,#40280)); +#40257 = ORIENTED_EDGE('',*,*,#40258,.T.); +#40258 = EDGE_CURVE('',#38602,#39247,#40259,.T.); +#40259 = SURFACE_CURVE('',#40260,(#40264,#40271),.PCURVE_S1.); +#40260 = LINE('',#40261,#40262); +#40261 = CARTESIAN_POINT('',(-2.65,-0.84,0.2)); +#40262 = VECTOR('',#40263,1.); +#40263 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#40264 = PCURVE('',#38650,#40265); +#40265 = DEFINITIONAL_REPRESENTATION('',(#40266),#40270); +#40266 = LINE('',#40267,#40268); +#40267 = CARTESIAN_POINT('',(0.,0.)); +#40268 = VECTOR('',#40269,1.); +#40269 = DIRECTION('',(0.,-1.)); +#40270 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40271 = PCURVE('',#38617,#40272); +#40272 = DEFINITIONAL_REPRESENTATION('',(#40273),#40277); +#40273 = LINE('',#40274,#40275); +#40274 = CARTESIAN_POINT('',(0.35,3.485297375361E-17)); +#40275 = VECTOR('',#40276,1.); +#40276 = DIRECTION('',(0.,-1.)); +#40277 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40278 = ORIENTED_EDGE('',*,*,#39269,.T.); +#40279 = ORIENTED_EDGE('',*,*,#40231,.F.); +#40280 = ORIENTED_EDGE('',*,*,#38629,.F.); +#40281 = ADVANCED_FACE('',(#40282),#38617,.F.); +#40282 = FACE_BOUND('',#40283,.F.); +#40283 = EDGE_LOOP('',(#40284,#40305,#40306,#40307)); +#40284 = ORIENTED_EDGE('',*,*,#40285,.T.); +#40285 = EDGE_CURVE('',#38574,#39224,#40286,.T.); +#40286 = SURFACE_CURVE('',#40287,(#40291,#40298),.PCURVE_S1.); +#40287 = LINE('',#40288,#40289); +#40288 = CARTESIAN_POINT('',(-3.,-0.84,0.2)); +#40289 = VECTOR('',#40290,1.); +#40290 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#40291 = PCURVE('',#38617,#40292); +#40292 = DEFINITIONAL_REPRESENTATION('',(#40293),#40297); +#40293 = LINE('',#40294,#40295); +#40294 = CARTESIAN_POINT('',(0.,0.)); +#40295 = VECTOR('',#40296,1.); +#40296 = DIRECTION('',(0.,-1.)); +#40297 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40298 = PCURVE('',#38589,#40299); +#40299 = DEFINITIONAL_REPRESENTATION('',(#40300),#40304); +#40300 = LINE('',#40301,#40302); +#40301 = CARTESIAN_POINT('',(0.2,0.)); +#40302 = VECTOR('',#40303,1.); +#40303 = DIRECTION('',(0.,-1.)); +#40304 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40305 = ORIENTED_EDGE('',*,*,#39246,.T.); +#40306 = ORIENTED_EDGE('',*,*,#40258,.F.); +#40307 = ORIENTED_EDGE('',*,*,#38601,.F.); +#40308 = ADVANCED_FACE('',(#40309),#38589,.F.); +#40309 = FACE_BOUND('',#40310,.F.); +#40310 = EDGE_LOOP('',(#40311,#40332,#40333,#40334)); +#40311 = ORIENTED_EDGE('',*,*,#40312,.T.); +#40312 = EDGE_CURVE('',#38546,#39201,#40313,.T.); +#40313 = SURFACE_CURVE('',#40314,(#40318,#40325),.PCURVE_S1.); +#40314 = LINE('',#40315,#40316); +#40315 = CARTESIAN_POINT('',(-3.,-0.84,5.551115123126E-17)); +#40316 = VECTOR('',#40317,1.); +#40317 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#40318 = PCURVE('',#38589,#40319); +#40319 = DEFINITIONAL_REPRESENTATION('',(#40320),#40324); +#40320 = LINE('',#40321,#40322); +#40321 = CARTESIAN_POINT('',(0.,0.)); +#40322 = VECTOR('',#40323,1.); +#40323 = DIRECTION('',(0.,-1.)); +#40324 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40325 = PCURVE('',#38561,#40326); +#40326 = DEFINITIONAL_REPRESENTATION('',(#40327),#40331); +#40327 = LINE('',#40328,#40329); +#40328 = CARTESIAN_POINT('',(0.35,-3.485297375361E-17)); +#40329 = VECTOR('',#40330,1.); +#40330 = DIRECTION('',(0.,-1.)); +#40331 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40332 = ORIENTED_EDGE('',*,*,#39223,.T.); +#40333 = ORIENTED_EDGE('',*,*,#40285,.F.); +#40334 = ORIENTED_EDGE('',*,*,#38573,.F.); +#40335 = ADVANCED_FACE('',(#40336),#38561,.F.); +#40336 = FACE_BOUND('',#40337,.F.); +#40337 = EDGE_LOOP('',(#40338,#40359,#40360,#40361)); +#40338 = ORIENTED_EDGE('',*,*,#40339,.T.); +#40339 = EDGE_CURVE('',#38517,#39177,#40340,.T.); +#40340 = SURFACE_CURVE('',#40341,(#40345,#40352),.PCURVE_S1.); +#40341 = LINE('',#40342,#40343); +#40342 = CARTESIAN_POINT('',(-2.65,-0.84,5.551115123126E-17)); +#40343 = VECTOR('',#40344,1.); +#40344 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#40345 = PCURVE('',#38561,#40346); +#40346 = DEFINITIONAL_REPRESENTATION('',(#40347),#40351); +#40347 = LINE('',#40348,#40349); +#40348 = CARTESIAN_POINT('',(0.,0.)); +#40349 = VECTOR('',#40350,1.); +#40350 = DIRECTION('',(0.,-1.)); +#40351 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40352 = PCURVE('',#38533,#40353); +#40353 = DEFINITIONAL_REPRESENTATION('',(#40354),#40358); +#40354 = LINE('',#40355,#40356); +#40355 = CARTESIAN_POINT('',(4.712388980385,0.)); +#40356 = VECTOR('',#40357,1.); +#40357 = DIRECTION('',(0.,-1.)); +#40358 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40359 = ORIENTED_EDGE('',*,*,#39200,.T.); +#40360 = ORIENTED_EDGE('',*,*,#40312,.F.); +#40361 = ORIENTED_EDGE('',*,*,#38545,.F.); +#40362 = ADVANCED_FACE('',(#40363),#38533,.T.); +#40363 = FACE_BOUND('',#40364,.T.); +#40364 = EDGE_LOOP('',(#40365,#40366,#40367,#40368)); +#40365 = ORIENTED_EDGE('',*,*,#38516,.T.); +#40366 = ORIENTED_EDGE('',*,*,#40339,.T.); +#40367 = ORIENTED_EDGE('',*,*,#39176,.F.); +#40368 = ORIENTED_EDGE('',*,*,#40369,.F.); +#40369 = EDGE_CURVE('',#38489,#39154,#40370,.T.); +#40370 = SURFACE_CURVE('',#40371,(#40375,#40382),.PCURVE_S1.); +#40371 = LINE('',#40372,#40373); +#40372 = CARTESIAN_POINT('',(-2.35,-0.84,0.3)); +#40373 = VECTOR('',#40374,1.); +#40374 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#40375 = PCURVE('',#38533,#40376); +#40376 = DEFINITIONAL_REPRESENTATION('',(#40377),#40381); +#40377 = LINE('',#40378,#40379); +#40378 = CARTESIAN_POINT('',(6.28318530718,0.)); +#40379 = VECTOR('',#40380,1.); +#40380 = DIRECTION('',(0.,-1.)); +#40381 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40382 = PCURVE('',#38504,#40383); +#40383 = DEFINITIONAL_REPRESENTATION('',(#40384),#40388); +#40384 = LINE('',#40385,#40386); +#40385 = CARTESIAN_POINT('',(0.425,-4.422237021472E-32)); +#40386 = VECTOR('',#40387,1.); +#40387 = DIRECTION('',(6.767833676919E-44,-1.)); +#40388 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40389 = ADVANCED_FACE('',(#40390),#38504,.F.); +#40390 = FACE_BOUND('',#40391,.F.); +#40391 = EDGE_LOOP('',(#40392,#40393,#40394,#40395)); +#40392 = ORIENTED_EDGE('',*,*,#39125,.T.); +#40393 = ORIENTED_EDGE('',*,*,#39153,.T.); +#40394 = ORIENTED_EDGE('',*,*,#40369,.F.); +#40395 = ORIENTED_EDGE('',*,*,#38488,.F.); +#40396 = ADVANCED_FACE('',(#40397),#38992,.T.); +#40397 = FACE_BOUND('',#40398,.T.); +#40398 = EDGE_LOOP('',(#40399,#40400,#40401,#40402)); +#40399 = ORIENTED_EDGE('',*,*,#39565,.T.); +#40400 = ORIENTED_EDGE('',*,*,#39780,.T.); +#40401 = ORIENTED_EDGE('',*,*,#38975,.F.); +#40402 = ORIENTED_EDGE('',*,*,#40403,.F.); +#40403 = EDGE_CURVE('',#39543,#38948,#40404,.T.); +#40404 = SURFACE_CURVE('',#40405,(#40409,#40416),.PCURVE_S1.); +#40405 = LINE('',#40406,#40407); +#40406 = CARTESIAN_POINT('',(-2.55,0.43,0.725)); +#40407 = VECTOR('',#40408,1.); +#40408 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#40409 = PCURVE('',#38992,#40410); +#40410 = DEFINITIONAL_REPRESENTATION('',(#40411),#40415); +#40411 = LINE('',#40412,#40413); +#40412 = CARTESIAN_POINT('',(6.28318530718,-5.551115123126E-17)); +#40413 = VECTOR('',#40414,1.); +#40414 = DIRECTION('',(0.,-1.)); +#40415 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40416 = PCURVE('',#38963,#40417); +#40417 = DEFINITIONAL_REPRESENTATION('',(#40418),#40422); +#40418 = LINE('',#40419,#40420); +#40419 = CARTESIAN_POINT('',(0.425,0.)); +#40420 = VECTOR('',#40421,1.); +#40421 = DIRECTION('',(0.,-1.)); +#40422 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40423 = ADVANCED_FACE('',(#40424),#38963,.F.); +#40424 = FACE_BOUND('',#40425,.F.); +#40425 = EDGE_LOOP('',(#40426,#40447,#40448,#40449)); +#40426 = ORIENTED_EDGE('',*,*,#40427,.T.); +#40427 = EDGE_CURVE('',#39515,#38915,#40428,.T.); +#40428 = SURFACE_CURVE('',#40429,(#40433,#40440),.PCURVE_S1.); +#40429 = LINE('',#40430,#40431); +#40430 = CARTESIAN_POINT('',(-2.55,0.43,0.3)); +#40431 = VECTOR('',#40432,1.); +#40432 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#40433 = PCURVE('',#38963,#40434); +#40434 = DEFINITIONAL_REPRESENTATION('',(#40435),#40439); +#40435 = LINE('',#40436,#40437); +#40436 = CARTESIAN_POINT('',(0.,0.)); +#40437 = VECTOR('',#40438,1.); +#40438 = DIRECTION('',(0.,-1.)); +#40439 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40440 = PCURVE('',#38935,#40441); +#40441 = DEFINITIONAL_REPRESENTATION('',(#40442),#40446); +#40442 = LINE('',#40443,#40444); +#40443 = CARTESIAN_POINT('',(1.570796326795,0.)); +#40444 = VECTOR('',#40445,1.); +#40445 = DIRECTION('',(0.,-1.)); +#40446 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40447 = ORIENTED_EDGE('',*,*,#38947,.T.); +#40448 = ORIENTED_EDGE('',*,*,#40403,.F.); +#40449 = ORIENTED_EDGE('',*,*,#39542,.F.); +#40450 = ADVANCED_FACE('',(#40451),#38935,.F.); +#40451 = FACE_BOUND('',#40452,.F.); +#40452 = EDGE_LOOP('',(#40453,#40474,#40475,#40476)); +#40453 = ORIENTED_EDGE('',*,*,#40454,.T.); +#40454 = EDGE_CURVE('',#39492,#38887,#40455,.T.); +#40455 = SURFACE_CURVE('',#40456,(#40460,#40467),.PCURVE_S1.); +#40456 = LINE('',#40457,#40458); +#40457 = CARTESIAN_POINT('',(-2.65,0.43,0.2)); +#40458 = VECTOR('',#40459,1.); +#40459 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#40460 = PCURVE('',#38935,#40461); +#40461 = DEFINITIONAL_REPRESENTATION('',(#40462),#40466); +#40462 = LINE('',#40463,#40464); +#40463 = CARTESIAN_POINT('',(0.,0.)); +#40464 = VECTOR('',#40465,1.); +#40465 = DIRECTION('',(0.,-1.)); +#40466 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40467 = PCURVE('',#38902,#40468); +#40468 = DEFINITIONAL_REPRESENTATION('',(#40469),#40473); +#40469 = LINE('',#40470,#40471); +#40470 = CARTESIAN_POINT('',(0.35,3.485297375361E-17)); +#40471 = VECTOR('',#40472,1.); +#40472 = DIRECTION('',(0.,-1.)); +#40473 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40474 = ORIENTED_EDGE('',*,*,#38914,.T.); +#40475 = ORIENTED_EDGE('',*,*,#40427,.F.); +#40476 = ORIENTED_EDGE('',*,*,#39514,.F.); +#40477 = ADVANCED_FACE('',(#40478),#38902,.F.); +#40478 = FACE_BOUND('',#40479,.F.); +#40479 = EDGE_LOOP('',(#40480,#40501,#40502,#40503)); +#40480 = ORIENTED_EDGE('',*,*,#40481,.T.); +#40481 = EDGE_CURVE('',#39469,#38859,#40482,.T.); +#40482 = SURFACE_CURVE('',#40483,(#40487,#40494),.PCURVE_S1.); +#40483 = LINE('',#40484,#40485); +#40484 = CARTESIAN_POINT('',(-3.,0.43,0.2)); +#40485 = VECTOR('',#40486,1.); +#40486 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#40487 = PCURVE('',#38902,#40488); +#40488 = DEFINITIONAL_REPRESENTATION('',(#40489),#40493); +#40489 = LINE('',#40490,#40491); +#40490 = CARTESIAN_POINT('',(0.,0.)); +#40491 = VECTOR('',#40492,1.); +#40492 = DIRECTION('',(0.,-1.)); +#40493 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40494 = PCURVE('',#38874,#40495); +#40495 = DEFINITIONAL_REPRESENTATION('',(#40496),#40500); +#40496 = LINE('',#40497,#40498); +#40497 = CARTESIAN_POINT('',(0.2,0.)); +#40498 = VECTOR('',#40499,1.); +#40499 = DIRECTION('',(0.,-1.)); +#40500 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40501 = ORIENTED_EDGE('',*,*,#38886,.T.); +#40502 = ORIENTED_EDGE('',*,*,#40454,.F.); +#40503 = ORIENTED_EDGE('',*,*,#39491,.F.); +#40504 = ADVANCED_FACE('',(#40505),#38874,.F.); +#40505 = FACE_BOUND('',#40506,.F.); +#40506 = EDGE_LOOP('',(#40507,#40528,#40529,#40530)); +#40507 = ORIENTED_EDGE('',*,*,#40508,.T.); +#40508 = EDGE_CURVE('',#39446,#38831,#40509,.T.); +#40509 = SURFACE_CURVE('',#40510,(#40514,#40521),.PCURVE_S1.); +#40510 = LINE('',#40511,#40512); +#40511 = CARTESIAN_POINT('',(-3.,0.43,5.551115123126E-17)); +#40512 = VECTOR('',#40513,1.); +#40513 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#40514 = PCURVE('',#38874,#40515); +#40515 = DEFINITIONAL_REPRESENTATION('',(#40516),#40520); +#40516 = LINE('',#40517,#40518); +#40517 = CARTESIAN_POINT('',(0.,0.)); +#40518 = VECTOR('',#40519,1.); +#40519 = DIRECTION('',(0.,-1.)); +#40520 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40521 = PCURVE('',#38846,#40522); +#40522 = DEFINITIONAL_REPRESENTATION('',(#40523),#40527); +#40523 = LINE('',#40524,#40525); +#40524 = CARTESIAN_POINT('',(0.35,-3.485297375361E-17)); +#40525 = VECTOR('',#40526,1.); +#40526 = DIRECTION('',(0.,-1.)); +#40527 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40528 = ORIENTED_EDGE('',*,*,#38858,.T.); +#40529 = ORIENTED_EDGE('',*,*,#40481,.F.); +#40530 = ORIENTED_EDGE('',*,*,#39468,.F.); +#40531 = ADVANCED_FACE('',(#40532),#38846,.F.); +#40532 = FACE_BOUND('',#40533,.F.); +#40533 = EDGE_LOOP('',(#40534,#40555,#40556,#40557)); +#40534 = ORIENTED_EDGE('',*,*,#40535,.T.); +#40535 = EDGE_CURVE('',#39422,#38802,#40536,.T.); +#40536 = SURFACE_CURVE('',#40537,(#40541,#40548),.PCURVE_S1.); +#40537 = LINE('',#40538,#40539); +#40538 = CARTESIAN_POINT('',(-2.65,0.43,5.551115123126E-17)); +#40539 = VECTOR('',#40540,1.); +#40540 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#40541 = PCURVE('',#38846,#40542); +#40542 = DEFINITIONAL_REPRESENTATION('',(#40543),#40547); +#40543 = LINE('',#40544,#40545); +#40544 = CARTESIAN_POINT('',(0.,0.)); +#40545 = VECTOR('',#40546,1.); +#40546 = DIRECTION('',(0.,-1.)); +#40547 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40548 = PCURVE('',#38818,#40549); +#40549 = DEFINITIONAL_REPRESENTATION('',(#40550),#40554); +#40550 = LINE('',#40551,#40552); +#40551 = CARTESIAN_POINT('',(4.712388980385,0.)); +#40552 = VECTOR('',#40553,1.); +#40553 = DIRECTION('',(0.,-1.)); +#40554 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40555 = ORIENTED_EDGE('',*,*,#38830,.T.); +#40556 = ORIENTED_EDGE('',*,*,#40508,.F.); +#40557 = ORIENTED_EDGE('',*,*,#39445,.F.); +#40558 = ADVANCED_FACE('',(#40559),#38818,.T.); +#40559 = FACE_BOUND('',#40560,.T.); +#40560 = EDGE_LOOP('',(#40561,#40562,#40563,#40564)); +#40561 = ORIENTED_EDGE('',*,*,#39421,.T.); +#40562 = ORIENTED_EDGE('',*,*,#40535,.T.); +#40563 = ORIENTED_EDGE('',*,*,#38801,.F.); +#40564 = ORIENTED_EDGE('',*,*,#40565,.F.); +#40565 = EDGE_CURVE('',#39399,#38774,#40566,.T.); +#40566 = SURFACE_CURVE('',#40567,(#40571,#40578),.PCURVE_S1.); +#40567 = LINE('',#40568,#40569); +#40568 = CARTESIAN_POINT('',(-2.35,0.43,0.3)); +#40569 = VECTOR('',#40570,1.); +#40570 = DIRECTION('',(-9.95799250103E-17,1.,0.)); +#40571 = PCURVE('',#38818,#40572); +#40572 = DEFINITIONAL_REPRESENTATION('',(#40573),#40577); +#40573 = LINE('',#40574,#40575); +#40574 = CARTESIAN_POINT('',(6.28318530718,5.551115123126E-17)); +#40575 = VECTOR('',#40576,1.); +#40576 = DIRECTION('',(0.,-1.)); +#40577 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40578 = PCURVE('',#38789,#40579); +#40579 = DEFINITIONAL_REPRESENTATION('',(#40580),#40584); +#40580 = LINE('',#40581,#40582); +#40581 = CARTESIAN_POINT('',(0.425,-4.422237021472E-32)); +#40582 = VECTOR('',#40583,1.); +#40583 = DIRECTION('',(6.767833676919E-44,-1.)); +#40584 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40585 = ADVANCED_FACE('',(#40586),#38789,.F.); +#40586 = FACE_BOUND('',#40587,.F.); +#40587 = EDGE_LOOP('',(#40588,#40589,#40590,#40591)); +#40588 = ORIENTED_EDGE('',*,*,#39615,.T.); +#40589 = ORIENTED_EDGE('',*,*,#38773,.T.); +#40590 = ORIENTED_EDGE('',*,*,#40565,.F.); +#40591 = ORIENTED_EDGE('',*,*,#39398,.F.); +#40592 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#40596)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#40593,#40594,#40595)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#40593 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#40594 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#40595 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#40596 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-02),#40593, + 'distance_accuracy_value','confusion accuracy'); +#40597 = SHAPE_DEFINITION_REPRESENTATION(#40598,#29687); +#40598 = PRODUCT_DEFINITION_SHAPE('','',#40599); +#40599 = PRODUCT_DEFINITION('design','',#40600,#40603); +#40600 = PRODUCT_DEFINITION_FORMATION('','',#40601); +#40601 = PRODUCT('SOLID','SOLID','',(#40602)); +#40602 = PRODUCT_CONTEXT('',#2,'mechanical'); +#40603 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#40604 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#40605,#40607); +#40605 = ( REPRESENTATION_RELATIONSHIP('','',#29687,#29677) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#40606) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#40606 = ITEM_DEFINED_TRANSFORMATION('','',#11,#29678); +#40607 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #40608); +#40608 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('58','=>[0:1:1:15]','',#29672, + #40599,$); +#40609 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#40601)); +#40610 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#40611,#40613); +#40611 = ( REPRESENTATION_RELATIONSHIP('','',#29677,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#40612) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#40612 = ITEM_DEFINED_TRANSFORMATION('','',#11,#219); +#40613 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #40614); +#40614 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('59','','',#5,#29672,$); +#40615 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#29674)); +#40616 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#40617),#50627); +#40617 = MANIFOLD_SOLID_BREP('',#40618); +#40618 = CLOSED_SHELL('',(#40619,#40739,#40815,#40891,#44389,#47272, + #47299,#47326,#47353,#47380,#47407,#47434,#47461,#47488,#47515, + #47542,#47569,#47596,#47623,#47650,#47677,#47704,#47731,#47758, + #47785,#47812,#47839,#47866,#47893,#47920,#47947,#47974,#48001, + #48028,#48055,#48082,#48109,#48136,#48163,#48190,#48217,#48244, + #48271,#48298,#48325,#48352,#48379,#48406,#48433,#48460,#48487, + #48514,#48541,#48568,#48575,#48622,#48649,#48676,#48703,#48730, + #48757,#48784,#48811,#48838,#48865,#48892,#48919,#48946,#48973, + #49000,#49027,#49054,#49081,#49108,#49135,#49162,#49189,#49216, + #49243,#49270,#49297,#49324,#49351,#49378,#49405,#49432,#49459, + #49486,#49513,#49540,#49567,#49594,#49601,#49648,#49675,#49702, + #49729,#49756,#49783,#49810,#49837,#49864,#49891,#49918,#49945, + #49972,#49999,#50026,#50053,#50080,#50107,#50134,#50161,#50188, + #50215,#50242,#50269,#50296,#50323,#50350,#50377,#50404,#50431, + #50458,#50485,#50512,#50539,#50566,#50593,#50620)); +#40619 = ADVANCED_FACE('',(#40620),#40634,.T.); +#40620 = FACE_BOUND('',#40621,.T.); +#40621 = EDGE_LOOP('',(#40622,#40657,#40685,#40713)); +#40622 = ORIENTED_EDGE('',*,*,#40623,.T.); +#40623 = EDGE_CURVE('',#40624,#40626,#40628,.T.); +#40624 = VERTEX_POINT('',#40625); +#40625 = CARTESIAN_POINT('',(172.03798,-48.116177,0.)); +#40626 = VERTEX_POINT('',#40627); +#40627 = CARTESIAN_POINT('',(172.03798,-48.116177,1.58)); +#40628 = SURFACE_CURVE('',#40629,(#40633,#40645),.PCURVE_S1.); +#40629 = LINE('',#40630,#40631); +#40630 = CARTESIAN_POINT('',(172.03798,-48.116177,0.)); +#40631 = VECTOR('',#40632,1.); +#40632 = DIRECTION('',(0.,0.,1.)); +#40633 = PCURVE('',#40634,#40639); +#40634 = PLANE('',#40635); +#40635 = AXIS2_PLACEMENT_3D('',#40636,#40637,#40638); +#40636 = CARTESIAN_POINT('',(172.03798,-48.116177,0.)); +#40637 = DIRECTION('',(0.258820112172,0.965925540368,-0.)); +#40638 = DIRECTION('',(0.965925540368,-0.258820112172,0.)); +#40639 = DEFINITIONAL_REPRESENTATION('',(#40640),#40644); +#40640 = LINE('',#40641,#40642); +#40641 = CARTESIAN_POINT('',(0.,0.)); +#40642 = VECTOR('',#40643,1.); +#40643 = DIRECTION('',(0.,-1.)); +#40644 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40645 = PCURVE('',#40646,#40651); +#40646 = PLANE('',#40647); +#40647 = AXIS2_PLACEMENT_3D('',#40648,#40649,#40650); +#40648 = CARTESIAN_POINT('',(171.816348,-48.096786,0.)); +#40649 = DIRECTION('',(8.715892108796E-02,0.996194420018,-0.)); +#40650 = DIRECTION('',(0.996194420018,-8.715892108796E-02,0.)); +#40651 = DEFINITIONAL_REPRESENTATION('',(#40652),#40656); +#40652 = LINE('',#40653,#40654); +#40653 = CARTESIAN_POINT('',(0.222478660336,0.)); +#40654 = VECTOR('',#40655,1.); +#40655 = DIRECTION('',(0.,-1.)); +#40656 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40657 = ORIENTED_EDGE('',*,*,#40658,.T.); +#40658 = EDGE_CURVE('',#40626,#40659,#40661,.T.); +#40659 = VERTEX_POINT('',#40660); +#40660 = CARTESIAN_POINT('',(172.252878,-48.173759,1.58)); +#40661 = SURFACE_CURVE('',#40662,(#40666,#40673),.PCURVE_S1.); +#40662 = LINE('',#40663,#40664); +#40663 = CARTESIAN_POINT('',(172.03798,-48.116177,1.58)); +#40664 = VECTOR('',#40665,1.); +#40665 = DIRECTION('',(0.965925540368,-0.258820112172,0.)); +#40666 = PCURVE('',#40634,#40667); +#40667 = DEFINITIONAL_REPRESENTATION('',(#40668),#40672); +#40668 = LINE('',#40669,#40670); +#40669 = CARTESIAN_POINT('',(0.,-1.58)); +#40670 = VECTOR('',#40671,1.); +#40671 = DIRECTION('',(1.,0.)); +#40672 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40673 = PCURVE('',#40674,#40679); +#40674 = PLANE('',#40675); +#40675 = AXIS2_PLACEMENT_3D('',#40676,#40677,#40678); +#40676 = CARTESIAN_POINT('',(152.64849106701,-89.1197753134,1.58)); +#40677 = DIRECTION('',(-0.,-0.,-1.)); +#40678 = DIRECTION('',(-1.,0.,0.)); +#40679 = DEFINITIONAL_REPRESENTATION('',(#40680),#40684); +#40680 = LINE('',#40681,#40682); +#40681 = CARTESIAN_POINT('',(-19.38948893298,41.003598313404)); +#40682 = VECTOR('',#40683,1.); +#40683 = DIRECTION('',(-0.965925540368,-0.258820112172)); +#40684 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40685 = ORIENTED_EDGE('',*,*,#40686,.F.); +#40686 = EDGE_CURVE('',#40687,#40659,#40689,.T.); +#40687 = VERTEX_POINT('',#40688); +#40688 = CARTESIAN_POINT('',(172.252878,-48.173759,0.)); +#40689 = SURFACE_CURVE('',#40690,(#40694,#40701),.PCURVE_S1.); +#40690 = LINE('',#40691,#40692); +#40691 = CARTESIAN_POINT('',(172.252878,-48.173759,0.)); +#40692 = VECTOR('',#40693,1.); +#40693 = DIRECTION('',(0.,0.,1.)); +#40694 = PCURVE('',#40634,#40695); +#40695 = DEFINITIONAL_REPRESENTATION('',(#40696),#40700); +#40696 = LINE('',#40697,#40698); +#40697 = CARTESIAN_POINT('',(0.222478846473,0.)); +#40698 = VECTOR('',#40699,1.); +#40699 = DIRECTION('',(0.,-1.)); +#40700 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40701 = PCURVE('',#40702,#40707); +#40702 = PLANE('',#40703); +#40703 = AXIS2_PLACEMENT_3D('',#40704,#40705,#40706); +#40704 = CARTESIAN_POINT('',(172.252878,-48.173759,0.)); +#40705 = DIRECTION('',(0.422620187698,0.906306888946,-0.)); +#40706 = DIRECTION('',(0.906306888946,-0.422620187698,0.)); +#40707 = DEFINITIONAL_REPRESENTATION('',(#40708),#40712); +#40708 = LINE('',#40709,#40710); +#40709 = CARTESIAN_POINT('',(0.,0.)); +#40710 = VECTOR('',#40711,1.); +#40711 = DIRECTION('',(0.,-1.)); +#40712 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40713 = ORIENTED_EDGE('',*,*,#40714,.F.); +#40714 = EDGE_CURVE('',#40624,#40687,#40715,.T.); +#40715 = SURFACE_CURVE('',#40716,(#40720,#40727),.PCURVE_S1.); +#40716 = LINE('',#40717,#40718); +#40717 = CARTESIAN_POINT('',(172.03798,-48.116177,0.)); +#40718 = VECTOR('',#40719,1.); +#40719 = DIRECTION('',(0.965925540368,-0.258820112172,0.)); +#40720 = PCURVE('',#40634,#40721); +#40721 = DEFINITIONAL_REPRESENTATION('',(#40722),#40726); +#40722 = LINE('',#40723,#40724); +#40723 = CARTESIAN_POINT('',(0.,0.)); +#40724 = VECTOR('',#40725,1.); +#40725 = DIRECTION('',(1.,0.)); +#40726 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40727 = PCURVE('',#40728,#40733); +#40728 = PLANE('',#40729); +#40729 = AXIS2_PLACEMENT_3D('',#40730,#40731,#40732); +#40730 = CARTESIAN_POINT('',(152.64849106701,-89.1197753134,0.)); +#40731 = DIRECTION('',(-0.,-0.,-1.)); +#40732 = DIRECTION('',(-1.,0.,0.)); +#40733 = DEFINITIONAL_REPRESENTATION('',(#40734),#40738); +#40734 = LINE('',#40735,#40736); +#40735 = CARTESIAN_POINT('',(-19.38948893298,41.003598313404)); +#40736 = VECTOR('',#40737,1.); +#40737 = DIRECTION('',(-0.965925540368,-0.258820112172)); +#40738 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40739 = ADVANCED_FACE('',(#40740),#40646,.T.); +#40740 = FACE_BOUND('',#40741,.T.); +#40741 = EDGE_LOOP('',(#40742,#40772,#40793,#40794)); +#40742 = ORIENTED_EDGE('',*,*,#40743,.T.); +#40743 = EDGE_CURVE('',#40744,#40746,#40748,.T.); +#40744 = VERTEX_POINT('',#40745); +#40745 = CARTESIAN_POINT('',(171.816348,-48.096786,0.)); +#40746 = VERTEX_POINT('',#40747); +#40747 = CARTESIAN_POINT('',(171.816348,-48.096786,1.58)); +#40748 = SURFACE_CURVE('',#40749,(#40753,#40760),.PCURVE_S1.); +#40749 = LINE('',#40750,#40751); +#40750 = CARTESIAN_POINT('',(171.816348,-48.096786,0.)); +#40751 = VECTOR('',#40752,1.); +#40752 = DIRECTION('',(0.,0.,1.)); +#40753 = PCURVE('',#40646,#40754); +#40754 = DEFINITIONAL_REPRESENTATION('',(#40755),#40759); +#40755 = LINE('',#40756,#40757); +#40756 = CARTESIAN_POINT('',(0.,0.)); +#40757 = VECTOR('',#40758,1.); +#40758 = DIRECTION('',(0.,-1.)); +#40759 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40760 = PCURVE('',#40761,#40766); +#40761 = PLANE('',#40762); +#40762 = AXIS2_PLACEMENT_3D('',#40763,#40764,#40765); +#40763 = CARTESIAN_POINT('',(133.470072,-48.096786,0.)); +#40764 = DIRECTION('',(0.,1.,0.)); +#40765 = DIRECTION('',(1.,0.,0.)); +#40766 = DEFINITIONAL_REPRESENTATION('',(#40767),#40771); +#40767 = LINE('',#40768,#40769); +#40768 = CARTESIAN_POINT('',(38.346276,0.)); +#40769 = VECTOR('',#40770,1.); +#40770 = DIRECTION('',(0.,-1.)); +#40771 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40772 = ORIENTED_EDGE('',*,*,#40773,.T.); +#40773 = EDGE_CURVE('',#40746,#40626,#40774,.T.); +#40774 = SURFACE_CURVE('',#40775,(#40779,#40786),.PCURVE_S1.); +#40775 = LINE('',#40776,#40777); +#40776 = CARTESIAN_POINT('',(171.816348,-48.096786,1.58)); +#40777 = VECTOR('',#40778,1.); +#40778 = DIRECTION('',(0.996194420018,-8.715892108796E-02,0.)); +#40779 = PCURVE('',#40646,#40780); +#40780 = DEFINITIONAL_REPRESENTATION('',(#40781),#40785); +#40781 = LINE('',#40782,#40783); +#40782 = CARTESIAN_POINT('',(0.,-1.58)); +#40783 = VECTOR('',#40784,1.); +#40784 = DIRECTION('',(1.,0.)); +#40785 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40786 = PCURVE('',#40674,#40787); +#40787 = DEFINITIONAL_REPRESENTATION('',(#40788),#40792); +#40788 = LINE('',#40789,#40790); +#40789 = CARTESIAN_POINT('',(-19.16785693298,41.022989313404)); +#40790 = VECTOR('',#40791,1.); +#40791 = DIRECTION('',(-0.996194420018,-8.715892108796E-02)); +#40792 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40793 = ORIENTED_EDGE('',*,*,#40623,.F.); +#40794 = ORIENTED_EDGE('',*,*,#40795,.F.); +#40795 = EDGE_CURVE('',#40744,#40624,#40796,.T.); +#40796 = SURFACE_CURVE('',#40797,(#40801,#40808),.PCURVE_S1.); +#40797 = LINE('',#40798,#40799); +#40798 = CARTESIAN_POINT('',(171.816348,-48.096786,0.)); +#40799 = VECTOR('',#40800,1.); +#40800 = DIRECTION('',(0.996194420018,-8.715892108796E-02,0.)); +#40801 = PCURVE('',#40646,#40802); +#40802 = DEFINITIONAL_REPRESENTATION('',(#40803),#40807); +#40803 = LINE('',#40804,#40805); +#40804 = CARTESIAN_POINT('',(0.,0.)); +#40805 = VECTOR('',#40806,1.); +#40806 = DIRECTION('',(1.,0.)); +#40807 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40808 = PCURVE('',#40728,#40809); +#40809 = DEFINITIONAL_REPRESENTATION('',(#40810),#40814); +#40810 = LINE('',#40811,#40812); +#40811 = CARTESIAN_POINT('',(-19.16785693298,41.022989313404)); +#40812 = VECTOR('',#40813,1.); +#40813 = DIRECTION('',(-0.996194420018,-8.715892108796E-02)); +#40814 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40815 = ADVANCED_FACE('',(#40816),#40702,.T.); +#40816 = FACE_BOUND('',#40817,.T.); +#40817 = EDGE_LOOP('',(#40818,#40819,#40842,#40870)); +#40818 = ORIENTED_EDGE('',*,*,#40686,.T.); +#40819 = ORIENTED_EDGE('',*,*,#40820,.T.); +#40820 = EDGE_CURVE('',#40659,#40821,#40823,.T.); +#40821 = VERTEX_POINT('',#40822); +#40822 = CARTESIAN_POINT('',(172.454512,-48.267783,1.58)); +#40823 = SURFACE_CURVE('',#40824,(#40828,#40835),.PCURVE_S1.); +#40824 = LINE('',#40825,#40826); +#40825 = CARTESIAN_POINT('',(172.252878,-48.173759,1.58)); +#40826 = VECTOR('',#40827,1.); +#40827 = DIRECTION('',(0.906306888946,-0.422620187698,0.)); +#40828 = PCURVE('',#40702,#40829); +#40829 = DEFINITIONAL_REPRESENTATION('',(#40830),#40834); +#40830 = LINE('',#40831,#40832); +#40831 = CARTESIAN_POINT('',(0.,-1.58)); +#40832 = VECTOR('',#40833,1.); +#40833 = DIRECTION('',(1.,0.)); +#40834 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40835 = PCURVE('',#40674,#40836); +#40836 = DEFINITIONAL_REPRESENTATION('',(#40837),#40841); +#40837 = LINE('',#40838,#40839); +#40838 = CARTESIAN_POINT('',(-19.60438693298,40.946016313404)); +#40839 = VECTOR('',#40840,1.); +#40840 = DIRECTION('',(-0.906306888946,-0.422620187698)); +#40841 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40842 = ORIENTED_EDGE('',*,*,#40843,.F.); +#40843 = EDGE_CURVE('',#40844,#40821,#40846,.T.); +#40844 = VERTEX_POINT('',#40845); +#40845 = CARTESIAN_POINT('',(172.454512,-48.267783,0.)); +#40846 = SURFACE_CURVE('',#40847,(#40851,#40858),.PCURVE_S1.); +#40847 = LINE('',#40848,#40849); +#40848 = CARTESIAN_POINT('',(172.454512,-48.267783,0.)); +#40849 = VECTOR('',#40850,1.); +#40850 = DIRECTION('',(0.,0.,1.)); +#40851 = PCURVE('',#40702,#40852); +#40852 = DEFINITIONAL_REPRESENTATION('',(#40853),#40857); +#40853 = LINE('',#40854,#40855); +#40854 = CARTESIAN_POINT('',(0.222478723774,0.)); +#40855 = VECTOR('',#40856,1.); +#40856 = DIRECTION('',(0.,-1.)); +#40857 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40858 = PCURVE('',#40859,#40864); +#40859 = PLANE('',#40860); +#40860 = AXIS2_PLACEMENT_3D('',#40861,#40862,#40863); +#40861 = CARTESIAN_POINT('',(172.454512,-48.267783,0.)); +#40862 = DIRECTION('',(0.573577574631,0.819151247256,-0.)); +#40863 = DIRECTION('',(0.819151247256,-0.573577574631,0.)); +#40864 = DEFINITIONAL_REPRESENTATION('',(#40865),#40869); +#40865 = LINE('',#40866,#40867); +#40866 = CARTESIAN_POINT('',(0.,0.)); +#40867 = VECTOR('',#40868,1.); +#40868 = DIRECTION('',(0.,-1.)); +#40869 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40870 = ORIENTED_EDGE('',*,*,#40871,.F.); +#40871 = EDGE_CURVE('',#40687,#40844,#40872,.T.); +#40872 = SURFACE_CURVE('',#40873,(#40877,#40884),.PCURVE_S1.); +#40873 = LINE('',#40874,#40875); +#40874 = CARTESIAN_POINT('',(172.252878,-48.173759,0.)); +#40875 = VECTOR('',#40876,1.); +#40876 = DIRECTION('',(0.906306888946,-0.422620187698,0.)); +#40877 = PCURVE('',#40702,#40878); +#40878 = DEFINITIONAL_REPRESENTATION('',(#40879),#40883); +#40879 = LINE('',#40880,#40881); +#40880 = CARTESIAN_POINT('',(0.,0.)); +#40881 = VECTOR('',#40882,1.); +#40882 = DIRECTION('',(1.,0.)); +#40883 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40884 = PCURVE('',#40728,#40885); +#40885 = DEFINITIONAL_REPRESENTATION('',(#40886),#40890); +#40886 = LINE('',#40887,#40888); +#40887 = CARTESIAN_POINT('',(-19.60438693298,40.946016313404)); +#40888 = VECTOR('',#40889,1.); +#40889 = DIRECTION('',(-0.906306888946,-0.422620187698)); +#40890 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40891 = ADVANCED_FACE('',(#40892,#42257,#43323),#40728,.T.); +#40892 = FACE_BOUND('',#40893,.T.); +#40893 = EDGE_LOOP('',(#40894,#40895,#40896,#40919,#40947,#40975,#41003, + #41031,#41059,#41087,#41115,#41143,#41171,#41199,#41227,#41255, + #41283,#41311,#41339,#41367,#41395,#41423,#41451,#41479,#41507, + #41535,#41563,#41591,#41619,#41647,#41675,#41703,#41731,#41759, + #41787,#41815,#41843,#41871,#41899,#41927,#41955,#41983,#42011, + #42039,#42067,#42095,#42123,#42151,#42179,#42207,#42235,#42256)); +#40894 = ORIENTED_EDGE('',*,*,#40714,.T.); +#40895 = ORIENTED_EDGE('',*,*,#40871,.T.); +#40896 = ORIENTED_EDGE('',*,*,#40897,.T.); +#40897 = EDGE_CURVE('',#40844,#40898,#40900,.T.); +#40898 = VERTEX_POINT('',#40899); +#40899 = CARTESIAN_POINT('',(172.636756,-48.395392,0.)); +#40900 = SURFACE_CURVE('',#40901,(#40905,#40912),.PCURVE_S1.); +#40901 = LINE('',#40902,#40903); +#40902 = CARTESIAN_POINT('',(172.454512,-48.267783,0.)); +#40903 = VECTOR('',#40904,1.); +#40904 = DIRECTION('',(0.819151247256,-0.573577574631,0.)); +#40905 = PCURVE('',#40728,#40906); +#40906 = DEFINITIONAL_REPRESENTATION('',(#40907),#40911); +#40907 = LINE('',#40908,#40909); +#40908 = CARTESIAN_POINT('',(-19.80602093298,40.851992313404)); +#40909 = VECTOR('',#40910,1.); +#40910 = DIRECTION('',(-0.819151247256,-0.573577574631)); +#40911 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40912 = PCURVE('',#40859,#40913); +#40913 = DEFINITIONAL_REPRESENTATION('',(#40914),#40918); +#40914 = LINE('',#40915,#40916); +#40915 = CARTESIAN_POINT('',(0.,0.)); +#40916 = VECTOR('',#40917,1.); +#40917 = DIRECTION('',(1.,0.)); +#40918 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40919 = ORIENTED_EDGE('',*,*,#40920,.T.); +#40920 = EDGE_CURVE('',#40898,#40921,#40923,.T.); +#40921 = VERTEX_POINT('',#40922); +#40922 = CARTESIAN_POINT('',(172.794071,-48.552709,0.)); +#40923 = SURFACE_CURVE('',#40924,(#40928,#40935),.PCURVE_S1.); +#40924 = LINE('',#40925,#40926); +#40925 = CARTESIAN_POINT('',(172.636756,-48.395392,0.)); +#40926 = VECTOR('',#40927,1.); +#40927 = DIRECTION('',(0.707102286354,-0.70711127599,0.)); +#40928 = PCURVE('',#40728,#40929); +#40929 = DEFINITIONAL_REPRESENTATION('',(#40930),#40934); +#40930 = LINE('',#40931,#40932); +#40931 = CARTESIAN_POINT('',(-19.98826493298,40.724383313404)); +#40932 = VECTOR('',#40933,1.); +#40933 = DIRECTION('',(-0.707102286354,-0.70711127599)); +#40934 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40935 = PCURVE('',#40936,#40941); +#40936 = PLANE('',#40937); +#40937 = AXIS2_PLACEMENT_3D('',#40938,#40939,#40940); +#40938 = CARTESIAN_POINT('',(172.636756,-48.395392,0.)); +#40939 = DIRECTION('',(0.70711127599,0.707102286354,-0.)); +#40940 = DIRECTION('',(0.707102286354,-0.70711127599,0.)); +#40941 = DEFINITIONAL_REPRESENTATION('',(#40942),#40946); +#40942 = LINE('',#40943,#40944); +#40943 = CARTESIAN_POINT('',(0.,0.)); +#40944 = VECTOR('',#40945,1.); +#40945 = DIRECTION('',(1.,0.)); +#40946 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40947 = ORIENTED_EDGE('',*,*,#40948,.T.); +#40948 = EDGE_CURVE('',#40921,#40949,#40951,.T.); +#40949 = VERTEX_POINT('',#40950); +#40950 = CARTESIAN_POINT('',(172.921679,-48.734954,0.)); +#40951 = SURFACE_CURVE('',#40952,(#40956,#40963),.PCURVE_S1.); +#40952 = LINE('',#40953,#40954); +#40953 = CARTESIAN_POINT('',(172.794071,-48.552709,0.)); +#40954 = VECTOR('',#40955,1.); +#40955 = DIRECTION('',(0.573572446702,-0.819154837857,0.)); +#40956 = PCURVE('',#40728,#40957); +#40957 = DEFINITIONAL_REPRESENTATION('',(#40958),#40962); +#40958 = LINE('',#40959,#40960); +#40959 = CARTESIAN_POINT('',(-20.14557993298,40.567066313404)); +#40960 = VECTOR('',#40961,1.); +#40961 = DIRECTION('',(-0.573572446702,-0.819154837857)); +#40962 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40963 = PCURVE('',#40964,#40969); +#40964 = PLANE('',#40965); +#40965 = AXIS2_PLACEMENT_3D('',#40966,#40967,#40968); +#40966 = CARTESIAN_POINT('',(172.794071,-48.552709,0.)); +#40967 = DIRECTION('',(0.819154837857,0.573572446702,-0.)); +#40968 = DIRECTION('',(0.573572446702,-0.819154837857,0.)); +#40969 = DEFINITIONAL_REPRESENTATION('',(#40970),#40974); +#40970 = LINE('',#40971,#40972); +#40971 = CARTESIAN_POINT('',(0.,0.)); +#40972 = VECTOR('',#40973,1.); +#40973 = DIRECTION('',(1.,0.)); +#40974 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40975 = ORIENTED_EDGE('',*,*,#40976,.T.); +#40976 = EDGE_CURVE('',#40949,#40977,#40979,.T.); +#40977 = VERTEX_POINT('',#40978); +#40978 = CARTESIAN_POINT('',(173.015701,-48.936589,0.)); +#40979 = SURFACE_CURVE('',#40980,(#40984,#40991),.PCURVE_S1.); +#40980 = LINE('',#40981,#40982); +#40981 = CARTESIAN_POINT('',(172.921679,-48.734954,0.)); +#40982 = VECTOR('',#40983,1.); +#40983 = DIRECTION('',(0.422611082053,-0.906311134945,0.)); +#40984 = PCURVE('',#40728,#40985); +#40985 = DEFINITIONAL_REPRESENTATION('',(#40986),#40990); +#40986 = LINE('',#40987,#40988); +#40987 = CARTESIAN_POINT('',(-20.27318793298,40.384821313404)); +#40988 = VECTOR('',#40989,1.); +#40989 = DIRECTION('',(-0.422611082053,-0.906311134945)); +#40990 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#40991 = PCURVE('',#40992,#40997); +#40992 = PLANE('',#40993); +#40993 = AXIS2_PLACEMENT_3D('',#40994,#40995,#40996); +#40994 = CARTESIAN_POINT('',(172.921679,-48.734954,0.)); +#40995 = DIRECTION('',(0.906311134945,0.422611082053,-0.)); +#40996 = DIRECTION('',(0.422611082053,-0.906311134945,0.)); +#40997 = DEFINITIONAL_REPRESENTATION('',(#40998),#41002); +#40998 = LINE('',#40999,#41000); +#40999 = CARTESIAN_POINT('',(0.,0.)); +#41000 = VECTOR('',#41001,1.); +#41001 = DIRECTION('',(1.,0.)); +#41002 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41003 = ORIENTED_EDGE('',*,*,#41004,.T.); +#41004 = EDGE_CURVE('',#40977,#41005,#41007,.T.); +#41005 = VERTEX_POINT('',#41006); +#41006 = CARTESIAN_POINT('',(173.073282,-49.151488,0.)); +#41007 = SURFACE_CURVE('',#41008,(#41012,#41019),.PCURVE_S1.); +#41008 = LINE('',#41009,#41010); +#41009 = CARTESIAN_POINT('',(173.015701,-48.936589,0.)); +#41010 = VECTOR('',#41011,1.); +#41011 = DIRECTION('',(0.258814794766,-0.965926965153,0.)); +#41012 = PCURVE('',#40728,#41013); +#41013 = DEFINITIONAL_REPRESENTATION('',(#41014),#41018); +#41014 = LINE('',#41015,#41016); +#41015 = CARTESIAN_POINT('',(-20.36720993298,40.183186313404)); +#41016 = VECTOR('',#41017,1.); +#41017 = DIRECTION('',(-0.258814794766,-0.965926965153)); +#41018 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41019 = PCURVE('',#41020,#41025); +#41020 = PLANE('',#41021); +#41021 = AXIS2_PLACEMENT_3D('',#41022,#41023,#41024); +#41022 = CARTESIAN_POINT('',(173.015701,-48.936589,0.)); +#41023 = DIRECTION('',(0.965926965153,0.258814794766,-0.)); +#41024 = DIRECTION('',(0.258814794766,-0.965926965153,0.)); +#41025 = DEFINITIONAL_REPRESENTATION('',(#41026),#41030); +#41026 = LINE('',#41027,#41028); +#41027 = CARTESIAN_POINT('',(0.,0.)); +#41028 = VECTOR('',#41029,1.); +#41029 = DIRECTION('',(1.,0.)); +#41030 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41031 = ORIENTED_EDGE('',*,*,#41032,.T.); +#41032 = EDGE_CURVE('',#41005,#41033,#41035,.T.); +#41033 = VERTEX_POINT('',#41034); +#41034 = CARTESIAN_POINT('',(173.092682,-49.37312,0.)); +#41035 = SURFACE_CURVE('',#41036,(#41040,#41047),.PCURVE_S1.); +#41036 = LINE('',#41037,#41038); +#41037 = CARTESIAN_POINT('',(173.073282,-49.151488,0.)); +#41038 = VECTOR('',#41039,1.); +#41039 = DIRECTION('',(8.719906688277E-02,-0.996190906772,0.)); +#41040 = PCURVE('',#40728,#41041); +#41041 = DEFINITIONAL_REPRESENTATION('',(#41042),#41046); +#41042 = LINE('',#41043,#41044); +#41043 = CARTESIAN_POINT('',(-20.42479093298,39.968287313404)); +#41044 = VECTOR('',#41045,1.); +#41045 = DIRECTION('',(-8.719906688277E-02,-0.996190906772)); +#41046 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41047 = PCURVE('',#41048,#41053); +#41048 = PLANE('',#41049); +#41049 = AXIS2_PLACEMENT_3D('',#41050,#41051,#41052); +#41050 = CARTESIAN_POINT('',(173.073282,-49.151488,0.)); +#41051 = DIRECTION('',(0.996190906772,8.719906688277E-02,-0.)); +#41052 = DIRECTION('',(8.719906688277E-02,-0.996190906772,0.)); +#41053 = DEFINITIONAL_REPRESENTATION('',(#41054),#41058); +#41054 = LINE('',#41055,#41056); +#41055 = CARTESIAN_POINT('',(0.,0.)); +#41056 = VECTOR('',#41057,1.); +#41057 = DIRECTION('',(1.,0.)); +#41058 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41059 = ORIENTED_EDGE('',*,*,#41060,.T.); +#41060 = EDGE_CURVE('',#41033,#41061,#41063,.T.); +#41061 = VERTEX_POINT('',#41062); +#41062 = CARTESIAN_POINT('',(169.735462,-130.140562,0.)); +#41063 = SURFACE_CURVE('',#41064,(#41068,#41075),.PCURVE_S1.); +#41064 = LINE('',#41065,#41066); +#41065 = CARTESIAN_POINT('',(173.092682,-49.37312,0.)); +#41066 = VECTOR('',#41067,1.); +#41067 = DIRECTION('',(-4.153063921532E-02,-0.999137230818,0.)); +#41068 = PCURVE('',#40728,#41069); +#41069 = DEFINITIONAL_REPRESENTATION('',(#41070),#41074); +#41070 = LINE('',#41071,#41072); +#41071 = CARTESIAN_POINT('',(-20.44419093298,39.746655313404)); +#41072 = VECTOR('',#41073,1.); +#41073 = DIRECTION('',(4.153063921532E-02,-0.999137230818)); +#41074 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41075 = PCURVE('',#41076,#41081); +#41076 = PLANE('',#41077); +#41077 = AXIS2_PLACEMENT_3D('',#41078,#41079,#41080); +#41078 = CARTESIAN_POINT('',(173.092682,-49.37312,0.)); +#41079 = DIRECTION('',(0.999137230818,-4.153063921532E-02,0.)); +#41080 = DIRECTION('',(-4.153063921532E-02,-0.999137230818,0.)); +#41081 = DEFINITIONAL_REPRESENTATION('',(#41082),#41086); +#41082 = LINE('',#41083,#41084); +#41083 = CARTESIAN_POINT('',(0.,0.)); +#41084 = VECTOR('',#41085,1.); +#41085 = DIRECTION('',(1.,0.)); +#41086 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41087 = ORIENTED_EDGE('',*,*,#41088,.T.); +#41088 = EDGE_CURVE('',#41061,#41089,#41091,.T.); +#41089 = VERTEX_POINT('',#41090); +#41090 = CARTESIAN_POINT('',(169.643462,-130.140562,0.)); +#41091 = SURFACE_CURVE('',#41092,(#41096,#41103),.PCURVE_S1.); +#41092 = LINE('',#41093,#41094); +#41093 = CARTESIAN_POINT('',(169.735462,-130.140562,0.)); +#41094 = VECTOR('',#41095,1.); +#41095 = DIRECTION('',(-1.,0.,0.)); +#41096 = PCURVE('',#40728,#41097); +#41097 = DEFINITIONAL_REPRESENTATION('',(#41098),#41102); +#41098 = LINE('',#41099,#41100); +#41099 = CARTESIAN_POINT('',(-17.08697093298,-41.02078668659)); +#41100 = VECTOR('',#41101,1.); +#41101 = DIRECTION('',(1.,0.)); +#41102 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41103 = PCURVE('',#41104,#41109); +#41104 = PLANE('',#41105); +#41105 = AXIS2_PLACEMENT_3D('',#41106,#41107,#41108); +#41106 = CARTESIAN_POINT('',(169.735462,-130.140562,0.)); +#41107 = DIRECTION('',(0.,-1.,0.)); +#41108 = DIRECTION('',(-1.,0.,0.)); +#41109 = DEFINITIONAL_REPRESENTATION('',(#41110),#41114); +#41110 = LINE('',#41111,#41112); +#41111 = CARTESIAN_POINT('',(0.,-0.)); +#41112 = VECTOR('',#41113,1.); +#41113 = DIRECTION('',(1.,0.)); +#41114 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41115 = ORIENTED_EDGE('',*,*,#41116,.T.); +#41116 = EDGE_CURVE('',#41089,#41117,#41119,.T.); +#41117 = VERTEX_POINT('',#41118); +#41118 = CARTESIAN_POINT('',(169.312467,-130.159149,0.)); +#41119 = SURFACE_CURVE('',#41120,(#41124,#41131),.PCURVE_S1.); +#41120 = LINE('',#41121,#41122); +#41121 = CARTESIAN_POINT('',(169.643462,-130.140562,0.)); +#41122 = VECTOR('',#41123,1.); +#41123 = DIRECTION('',(-0.998427031243,-5.606659686621E-02,0.)); +#41124 = PCURVE('',#40728,#41125); +#41125 = DEFINITIONAL_REPRESENTATION('',(#41126),#41130); +#41126 = LINE('',#41127,#41128); +#41127 = CARTESIAN_POINT('',(-16.99497093298,-41.02078668659)); +#41128 = VECTOR('',#41129,1.); +#41129 = DIRECTION('',(0.998427031243,-5.606659686621E-02)); +#41130 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41131 = PCURVE('',#41132,#41137); +#41132 = PLANE('',#41133); +#41133 = AXIS2_PLACEMENT_3D('',#41134,#41135,#41136); +#41134 = CARTESIAN_POINT('',(169.643462,-130.140562,0.)); +#41135 = DIRECTION('',(5.606659686621E-02,-0.998427031243,0.)); +#41136 = DIRECTION('',(-0.998427031243,-5.606659686621E-02,0.)); +#41137 = DEFINITIONAL_REPRESENTATION('',(#41138),#41142); +#41138 = LINE('',#41139,#41140); +#41139 = CARTESIAN_POINT('',(0.,0.)); +#41140 = VECTOR('',#41141,1.); +#41141 = DIRECTION('',(1.,0.)); +#41142 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41143 = ORIENTED_EDGE('',*,*,#41144,.T.); +#41144 = EDGE_CURVE('',#41117,#41145,#41147,.T.); +#41145 = VERTEX_POINT('',#41146); +#41146 = CARTESIAN_POINT('',(168.985635,-130.214678,0.)); +#41147 = SURFACE_CURVE('',#41148,(#41152,#41159),.PCURVE_S1.); +#41148 = LINE('',#41149,#41150); +#41149 = CARTESIAN_POINT('',(169.312467,-130.159149,0.)); +#41150 = VECTOR('',#41151,1.); +#41151 = DIRECTION('',(-0.985872009943,-0.16750038809,0.)); +#41152 = PCURVE('',#40728,#41153); +#41153 = DEFINITIONAL_REPRESENTATION('',(#41154),#41158); +#41154 = LINE('',#41155,#41156); +#41155 = CARTESIAN_POINT('',(-16.66397593298,-41.03937368659)); +#41156 = VECTOR('',#41157,1.); +#41157 = DIRECTION('',(0.985872009943,-0.16750038809)); +#41158 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41159 = PCURVE('',#41160,#41165); +#41160 = PLANE('',#41161); +#41161 = AXIS2_PLACEMENT_3D('',#41162,#41163,#41164); +#41162 = CARTESIAN_POINT('',(169.312467,-130.159149,0.)); +#41163 = DIRECTION('',(0.16750038809,-0.985872009943,0.)); +#41164 = DIRECTION('',(-0.985872009943,-0.16750038809,0.)); +#41165 = DEFINITIONAL_REPRESENTATION('',(#41166),#41170); +#41166 = LINE('',#41167,#41168); +#41167 = CARTESIAN_POINT('',(0.,0.)); +#41168 = VECTOR('',#41169,1.); +#41169 = DIRECTION('',(1.,0.)); +#41170 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41171 = ORIENTED_EDGE('',*,*,#41172,.T.); +#41172 = EDGE_CURVE('',#41145,#41173,#41175,.T.); +#41173 = VERTEX_POINT('',#41174); +#41174 = CARTESIAN_POINT('',(168.667075,-130.306452,0.)); +#41175 = SURFACE_CURVE('',#41176,(#41180,#41187),.PCURVE_S1.); +#41176 = LINE('',#41177,#41178); +#41177 = CARTESIAN_POINT('',(168.985635,-130.214678,0.)); +#41178 = VECTOR('',#41179,1.); +#41179 = DIRECTION('',(-0.960918569693,-0.276831180359,0.)); +#41180 = PCURVE('',#40728,#41181); +#41181 = DEFINITIONAL_REPRESENTATION('',(#41182),#41186); +#41182 = LINE('',#41183,#41184); +#41183 = CARTESIAN_POINT('',(-16.33714393298,-41.09490268659)); +#41184 = VECTOR('',#41185,1.); +#41185 = DIRECTION('',(0.960918569693,-0.276831180359)); +#41186 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41187 = PCURVE('',#41188,#41193); +#41188 = PLANE('',#41189); +#41189 = AXIS2_PLACEMENT_3D('',#41190,#41191,#41192); +#41190 = CARTESIAN_POINT('',(168.985635,-130.214678,0.)); +#41191 = DIRECTION('',(0.276831180359,-0.960918569693,0.)); +#41192 = DIRECTION('',(-0.960918569693,-0.276831180359,0.)); +#41193 = DEFINITIONAL_REPRESENTATION('',(#41194),#41198); +#41194 = LINE('',#41195,#41196); +#41195 = CARTESIAN_POINT('',(0.,0.)); +#41196 = VECTOR('',#41197,1.); +#41197 = DIRECTION('',(1.,0.)); +#41198 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41199 = ORIENTED_EDGE('',*,*,#41200,.T.); +#41200 = EDGE_CURVE('',#41173,#41201,#41203,.T.); +#41201 = VERTEX_POINT('',#41202); +#41202 = CARTESIAN_POINT('',(168.360793,-130.433316,0.)); +#41203 = SURFACE_CURVE('',#41204,(#41208,#41215),.PCURVE_S1.); +#41204 = LINE('',#41205,#41206); +#41205 = CARTESIAN_POINT('',(168.667075,-130.306452,0.)); +#41206 = VECTOR('',#41207,1.); +#41207 = DIRECTION('',(-0.923881834275,-0.382677875368,0.)); +#41208 = PCURVE('',#40728,#41209); +#41209 = DEFINITIONAL_REPRESENTATION('',(#41210),#41214); +#41210 = LINE('',#41211,#41212); +#41211 = CARTESIAN_POINT('',(-16.01858393298,-41.18667668659)); +#41212 = VECTOR('',#41213,1.); +#41213 = DIRECTION('',(0.923881834275,-0.382677875368)); +#41214 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41215 = PCURVE('',#41216,#41221); +#41216 = PLANE('',#41217); +#41217 = AXIS2_PLACEMENT_3D('',#41218,#41219,#41220); +#41218 = CARTESIAN_POINT('',(168.667075,-130.306452,0.)); +#41219 = DIRECTION('',(0.382677875368,-0.923881834275,0.)); +#41220 = DIRECTION('',(-0.923881834275,-0.382677875368,0.)); +#41221 = DEFINITIONAL_REPRESENTATION('',(#41222),#41226); +#41222 = LINE('',#41223,#41224); +#41223 = CARTESIAN_POINT('',(0.,0.)); +#41224 = VECTOR('',#41225,1.); +#41225 = DIRECTION('',(1.,0.)); +#41226 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41227 = ORIENTED_EDGE('',*,*,#41228,.T.); +#41228 = EDGE_CURVE('',#41201,#41229,#41231,.T.); +#41229 = VERTEX_POINT('',#41230); +#41230 = CARTESIAN_POINT('',(168.070642,-130.593675,0.)); +#41231 = SURFACE_CURVE('',#41232,(#41236,#41243),.PCURVE_S1.); +#41232 = LINE('',#41233,#41234); +#41233 = CARTESIAN_POINT('',(168.360793,-130.433316,0.)); +#41234 = VECTOR('',#41235,1.); +#41235 = DIRECTION('',(-0.875225707014,-0.483714752495,0.)); +#41236 = PCURVE('',#40728,#41237); +#41237 = DEFINITIONAL_REPRESENTATION('',(#41238),#41242); +#41238 = LINE('',#41239,#41240); +#41239 = CARTESIAN_POINT('',(-15.71230193298,-41.31354068659)); +#41240 = VECTOR('',#41241,1.); +#41241 = DIRECTION('',(0.875225707014,-0.483714752495)); +#41242 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41243 = PCURVE('',#41244,#41249); +#41244 = PLANE('',#41245); +#41245 = AXIS2_PLACEMENT_3D('',#41246,#41247,#41248); +#41246 = CARTESIAN_POINT('',(168.360793,-130.433316,0.)); +#41247 = DIRECTION('',(0.483714752495,-0.875225707014,0.)); +#41248 = DIRECTION('',(-0.875225707014,-0.483714752495,0.)); +#41249 = DEFINITIONAL_REPRESENTATION('',(#41250),#41254); +#41250 = LINE('',#41251,#41252); +#41251 = CARTESIAN_POINT('',(0.,0.)); +#41252 = VECTOR('',#41253,1.); +#41253 = DIRECTION('',(1.,0.)); +#41254 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41255 = ORIENTED_EDGE('',*,*,#41256,.T.); +#41256 = EDGE_CURVE('',#41229,#41257,#41259,.T.); +#41257 = VERTEX_POINT('',#41258); +#41258 = CARTESIAN_POINT('',(167.800269,-130.785512,0.)); +#41259 = SURFACE_CURVE('',#41260,(#41264,#41271),.PCURVE_S1.); +#41260 = LINE('',#41261,#41262); +#41261 = CARTESIAN_POINT('',(168.070642,-130.593675,0.)); +#41262 = VECTOR('',#41263,1.); +#41263 = DIRECTION('',(-0.815564960361,-0.578665529845,0.)); +#41264 = PCURVE('',#40728,#41265); +#41265 = DEFINITIONAL_REPRESENTATION('',(#41266),#41270); +#41266 = LINE('',#41267,#41268); +#41267 = CARTESIAN_POINT('',(-15.42215093298,-41.47389968659)); +#41268 = VECTOR('',#41269,1.); +#41269 = DIRECTION('',(0.815564960361,-0.578665529845)); +#41270 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41271 = PCURVE('',#41272,#41277); +#41272 = PLANE('',#41273); +#41273 = AXIS2_PLACEMENT_3D('',#41274,#41275,#41276); +#41274 = CARTESIAN_POINT('',(168.070642,-130.593675,0.)); +#41275 = DIRECTION('',(0.578665529845,-0.815564960361,0.)); +#41276 = DIRECTION('',(-0.815564960361,-0.578665529845,0.)); +#41277 = DEFINITIONAL_REPRESENTATION('',(#41278),#41282); +#41278 = LINE('',#41279,#41280); +#41279 = CARTESIAN_POINT('',(0.,0.)); +#41280 = VECTOR('',#41281,1.); +#41281 = DIRECTION('',(1.,0.)); +#41282 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41283 = ORIENTED_EDGE('',*,*,#41284,.T.); +#41284 = EDGE_CURVE('',#41257,#41285,#41287,.T.); +#41285 = VERTEX_POINT('',#41286); +#41286 = CARTESIAN_POINT('',(167.553076,-131.006416,0.)); +#41287 = SURFACE_CURVE('',#41288,(#41292,#41299),.PCURVE_S1.); +#41288 = LINE('',#41289,#41290); +#41289 = CARTESIAN_POINT('',(167.800269,-130.785512,0.)); +#41290 = VECTOR('',#41291,1.); +#41291 = DIRECTION('',(-0.745643919311,-0.666344614741,0.)); +#41292 = PCURVE('',#40728,#41293); +#41293 = DEFINITIONAL_REPRESENTATION('',(#41294),#41298); +#41294 = LINE('',#41295,#41296); +#41295 = CARTESIAN_POINT('',(-15.15177793298,-41.66573668659)); +#41296 = VECTOR('',#41297,1.); +#41297 = DIRECTION('',(0.745643919311,-0.666344614741)); +#41298 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41299 = PCURVE('',#41300,#41305); +#41300 = PLANE('',#41301); +#41301 = AXIS2_PLACEMENT_3D('',#41302,#41303,#41304); +#41302 = CARTESIAN_POINT('',(167.800269,-130.785512,0.)); +#41303 = DIRECTION('',(0.666344614741,-0.745643919311,0.)); +#41304 = DIRECTION('',(-0.745643919311,-0.666344614741,0.)); +#41305 = DEFINITIONAL_REPRESENTATION('',(#41306),#41310); +#41306 = LINE('',#41307,#41308); +#41307 = CARTESIAN_POINT('',(0.,0.)); +#41308 = VECTOR('',#41309,1.); +#41309 = DIRECTION('',(1.,0.)); +#41310 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41311 = ORIENTED_EDGE('',*,*,#41312,.T.); +#41312 = EDGE_CURVE('',#41285,#41313,#41315,.T.); +#41313 = VERTEX_POINT('',#41314); +#41314 = CARTESIAN_POINT('',(167.33217,-131.253607,0.)); +#41315 = SURFACE_CURVE('',#41316,(#41320,#41327),.PCURVE_S1.); +#41316 = LINE('',#41317,#41318); +#41317 = CARTESIAN_POINT('',(167.553076,-131.006416,0.)); +#41318 = VECTOR('',#41319,1.); +#41319 = DIRECTION('',(-0.66635096639,-0.745638243112,0.)); +#41320 = PCURVE('',#40728,#41321); +#41321 = DEFINITIONAL_REPRESENTATION('',(#41322),#41326); +#41322 = LINE('',#41323,#41324); +#41323 = CARTESIAN_POINT('',(-14.90458493298,-41.88664068659)); +#41324 = VECTOR('',#41325,1.); +#41325 = DIRECTION('',(0.66635096639,-0.745638243112)); +#41326 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41327 = PCURVE('',#41328,#41333); +#41328 = PLANE('',#41329); +#41329 = AXIS2_PLACEMENT_3D('',#41330,#41331,#41332); +#41330 = CARTESIAN_POINT('',(167.553076,-131.006416,0.)); +#41331 = DIRECTION('',(0.745638243112,-0.66635096639,0.)); +#41332 = DIRECTION('',(-0.66635096639,-0.745638243112,0.)); +#41333 = DEFINITIONAL_REPRESENTATION('',(#41334),#41338); +#41334 = LINE('',#41335,#41336); +#41335 = CARTESIAN_POINT('',(0.,0.)); +#41336 = VECTOR('',#41337,1.); +#41337 = DIRECTION('',(1.,0.)); +#41338 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41339 = ORIENTED_EDGE('',*,*,#41340,.T.); +#41340 = EDGE_CURVE('',#41313,#41341,#41343,.T.); +#41341 = VERTEX_POINT('',#41342); +#41342 = CARTESIAN_POINT('',(167.140329,-131.523978,0.)); +#41343 = SURFACE_CURVE('',#41344,(#41348,#41355),.PCURVE_S1.); +#41344 = LINE('',#41345,#41346); +#41345 = CARTESIAN_POINT('',(167.33217,-131.253607,0.)); +#41346 = VECTOR('',#41347,1.); +#41347 = DIRECTION('',(-0.578676402433,-0.815557245856,0.)); +#41348 = PCURVE('',#40728,#41349); +#41349 = DEFINITIONAL_REPRESENTATION('',(#41350),#41354); +#41350 = LINE('',#41351,#41352); +#41351 = CARTESIAN_POINT('',(-14.68367893298,-42.13383168659)); +#41352 = VECTOR('',#41353,1.); +#41353 = DIRECTION('',(0.578676402433,-0.815557245856)); +#41354 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41355 = PCURVE('',#41356,#41361); +#41356 = PLANE('',#41357); +#41357 = AXIS2_PLACEMENT_3D('',#41358,#41359,#41360); +#41358 = CARTESIAN_POINT('',(167.33217,-131.253607,0.)); +#41359 = DIRECTION('',(0.815557245856,-0.578676402433,0.)); +#41360 = DIRECTION('',(-0.578676402433,-0.815557245856,0.)); +#41361 = DEFINITIONAL_REPRESENTATION('',(#41362),#41366); +#41362 = LINE('',#41363,#41364); +#41363 = CARTESIAN_POINT('',(0.,0.)); +#41364 = VECTOR('',#41365,1.); +#41365 = DIRECTION('',(1.,0.)); +#41366 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41367 = ORIENTED_EDGE('',*,*,#41368,.T.); +#41368 = EDGE_CURVE('',#41341,#41369,#41371,.T.); +#41369 = VERTEX_POINT('',#41370); +#41370 = CARTESIAN_POINT('',(166.979967,-131.814127,0.)); +#41371 = SURFACE_CURVE('',#41372,(#41376,#41383),.PCURVE_S1.); +#41372 = LINE('',#41373,#41374); +#41373 = CARTESIAN_POINT('',(167.140329,-131.523978,0.)); +#41374 = VECTOR('',#41375,1.); +#41375 = DIRECTION('',(-0.483724238541,-0.875220464253,0.)); +#41376 = PCURVE('',#40728,#41377); +#41377 = DEFINITIONAL_REPRESENTATION('',(#41378),#41382); +#41378 = LINE('',#41379,#41380); +#41379 = CARTESIAN_POINT('',(-14.49183793298,-42.40420268659)); +#41380 = VECTOR('',#41381,1.); +#41381 = DIRECTION('',(0.483724238541,-0.875220464253)); +#41382 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41383 = PCURVE('',#41384,#41389); +#41384 = PLANE('',#41385); +#41385 = AXIS2_PLACEMENT_3D('',#41386,#41387,#41388); +#41386 = CARTESIAN_POINT('',(167.140329,-131.523978,0.)); +#41387 = DIRECTION('',(0.875220464253,-0.483724238541,0.)); +#41388 = DIRECTION('',(-0.483724238541,-0.875220464253,0.)); +#41389 = DEFINITIONAL_REPRESENTATION('',(#41390),#41394); +#41390 = LINE('',#41391,#41392); +#41391 = CARTESIAN_POINT('',(0.,0.)); +#41392 = VECTOR('',#41393,1.); +#41393 = DIRECTION('',(1.,0.)); +#41394 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41395 = ORIENTED_EDGE('',*,*,#41396,.T.); +#41396 = EDGE_CURVE('',#41369,#41397,#41399,.T.); +#41397 = VERTEX_POINT('',#41398); +#41398 = CARTESIAN_POINT('',(166.8531,-132.120408,0.)); +#41399 = SURFACE_CURVE('',#41400,(#41404,#41411),.PCURVE_S1.); +#41400 = LINE('',#41401,#41402); +#41401 = CARTESIAN_POINT('',(166.979967,-131.814127,0.)); +#41402 = VECTOR('',#41403,1.); +#41403 = DIRECTION('',(-0.382686665926,-0.92387819312,0.)); +#41404 = PCURVE('',#40728,#41405); +#41405 = DEFINITIONAL_REPRESENTATION('',(#41406),#41410); +#41406 = LINE('',#41407,#41408); +#41407 = CARTESIAN_POINT('',(-14.33147593298,-42.69435168659)); +#41408 = VECTOR('',#41409,1.); +#41409 = DIRECTION('',(0.382686665926,-0.92387819312)); +#41410 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41411 = PCURVE('',#41412,#41417); +#41412 = PLANE('',#41413); +#41413 = AXIS2_PLACEMENT_3D('',#41414,#41415,#41416); +#41414 = CARTESIAN_POINT('',(166.979967,-131.814127,0.)); +#41415 = DIRECTION('',(0.92387819312,-0.382686665926,0.)); +#41416 = DIRECTION('',(-0.382686665926,-0.92387819312,0.)); +#41417 = DEFINITIONAL_REPRESENTATION('',(#41418),#41422); +#41418 = LINE('',#41419,#41420); +#41419 = CARTESIAN_POINT('',(0.,0.)); +#41420 = VECTOR('',#41421,1.); +#41421 = DIRECTION('',(1.,0.)); +#41422 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41423 = ORIENTED_EDGE('',*,*,#41424,.T.); +#41424 = EDGE_CURVE('',#41397,#41425,#41427,.T.); +#41425 = VERTEX_POINT('',#41426); +#41426 = CARTESIAN_POINT('',(166.761323,-132.438967,0.)); +#41427 = SURFACE_CURVE('',#41428,(#41432,#41439),.PCURVE_S1.); +#41428 = LINE('',#41429,#41430); +#41429 = CARTESIAN_POINT('',(166.8531,-132.120408,0.)); +#41430 = VECTOR('',#41431,1.); +#41431 = DIRECTION('',(-0.276840338594,-0.960915931248,0.)); +#41432 = PCURVE('',#40728,#41433); +#41433 = DEFINITIONAL_REPRESENTATION('',(#41434),#41438); +#41434 = LINE('',#41435,#41436); +#41435 = CARTESIAN_POINT('',(-14.20460893298,-43.00063268659)); +#41436 = VECTOR('',#41437,1.); +#41437 = DIRECTION('',(0.276840338594,-0.960915931248)); +#41438 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41439 = PCURVE('',#41440,#41445); +#41440 = PLANE('',#41441); +#41441 = AXIS2_PLACEMENT_3D('',#41442,#41443,#41444); +#41442 = CARTESIAN_POINT('',(166.8531,-132.120408,0.)); +#41443 = DIRECTION('',(0.960915931248,-0.276840338594,0.)); +#41444 = DIRECTION('',(-0.276840338594,-0.960915931248,0.)); +#41445 = DEFINITIONAL_REPRESENTATION('',(#41446),#41450); +#41446 = LINE('',#41447,#41448); +#41447 = CARTESIAN_POINT('',(0.,0.)); +#41448 = VECTOR('',#41449,1.); +#41449 = DIRECTION('',(1.,0.)); +#41450 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41451 = ORIENTED_EDGE('',*,*,#41452,.T.); +#41452 = EDGE_CURVE('',#41425,#41453,#41455,.T.); +#41453 = VERTEX_POINT('',#41454); +#41454 = CARTESIAN_POINT('',(166.70579,-132.765799,0.)); +#41455 = SURFACE_CURVE('',#41456,(#41460,#41467),.PCURVE_S1.); +#41456 = LINE('',#41457,#41458); +#41457 = CARTESIAN_POINT('',(166.761323,-132.438967,0.)); +#41458 = VECTOR('',#41459,1.); +#41459 = DIRECTION('',(-0.167512115327,-0.985870017405,0.)); +#41460 = PCURVE('',#40728,#41461); +#41461 = DEFINITIONAL_REPRESENTATION('',(#41462),#41466); +#41462 = LINE('',#41463,#41464); +#41463 = CARTESIAN_POINT('',(-14.11283193298,-43.31919168659)); +#41464 = VECTOR('',#41465,1.); +#41465 = DIRECTION('',(0.167512115327,-0.985870017405)); +#41466 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41467 = PCURVE('',#41468,#41473); +#41468 = PLANE('',#41469); +#41469 = AXIS2_PLACEMENT_3D('',#41470,#41471,#41472); +#41470 = CARTESIAN_POINT('',(166.761323,-132.438967,0.)); +#41471 = DIRECTION('',(0.985870017405,-0.167512115327,0.)); +#41472 = DIRECTION('',(-0.167512115327,-0.985870017405,0.)); +#41473 = DEFINITIONAL_REPRESENTATION('',(#41474),#41478); +#41474 = LINE('',#41475,#41476); +#41475 = CARTESIAN_POINT('',(0.,0.)); +#41476 = VECTOR('',#41477,1.); +#41477 = DIRECTION('',(1.,0.)); +#41478 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41479 = ORIENTED_EDGE('',*,*,#41480,.T.); +#41480 = EDGE_CURVE('',#41453,#41481,#41483,.T.); +#41481 = VERTEX_POINT('',#41482); +#41482 = CARTESIAN_POINT('',(166.687231,-133.096793,0.)); +#41483 = SURFACE_CURVE('',#41484,(#41488,#41495),.PCURVE_S1.); +#41484 = LINE('',#41485,#41486); +#41485 = CARTESIAN_POINT('',(166.70579,-132.765799,0.)); +#41486 = VECTOR('',#41487,1.); +#41487 = DIRECTION('',(-5.598257001052E-02,-0.998431746218,0.)); +#41488 = PCURVE('',#40728,#41489); +#41489 = DEFINITIONAL_REPRESENTATION('',(#41490),#41494); +#41490 = LINE('',#41491,#41492); +#41491 = CARTESIAN_POINT('',(-14.05729893298,-43.64602368659)); +#41492 = VECTOR('',#41493,1.); +#41493 = DIRECTION('',(5.598257001052E-02,-0.998431746218)); +#41494 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41495 = PCURVE('',#41496,#41501); +#41496 = PLANE('',#41497); +#41497 = AXIS2_PLACEMENT_3D('',#41498,#41499,#41500); +#41498 = CARTESIAN_POINT('',(166.70579,-132.765799,0.)); +#41499 = DIRECTION('',(0.998431746218,-5.598257001052E-02,0.)); +#41500 = DIRECTION('',(-5.598257001052E-02,-0.998431746218,0.)); +#41501 = DEFINITIONAL_REPRESENTATION('',(#41502),#41506); +#41502 = LINE('',#41503,#41504); +#41503 = CARTESIAN_POINT('',(0.,0.)); +#41504 = VECTOR('',#41505,1.); +#41505 = DIRECTION('',(1.,0.)); +#41506 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41507 = ORIENTED_EDGE('',*,*,#41508,.T.); +#41508 = EDGE_CURVE('',#41481,#41509,#41511,.T.); +#41509 = VERTEX_POINT('',#41510); +#41510 = CARTESIAN_POINT('',(138.620462,-133.095024,0.)); +#41511 = SURFACE_CURVE('',#41512,(#41516,#41523),.PCURVE_S1.); +#41512 = LINE('',#41513,#41514); +#41513 = CARTESIAN_POINT('',(166.687231,-133.096793,0.)); +#41514 = VECTOR('',#41515,1.); +#41515 = DIRECTION('',(-0.999999998014,6.302827363143E-05,0.)); +#41516 = PCURVE('',#40728,#41517); +#41517 = DEFINITIONAL_REPRESENTATION('',(#41518),#41522); +#41518 = LINE('',#41519,#41520); +#41519 = CARTESIAN_POINT('',(-14.03873993298,-43.97701768659)); +#41520 = VECTOR('',#41521,1.); +#41521 = DIRECTION('',(0.999999998014,6.302827363143E-05)); +#41522 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41523 = PCURVE('',#41524,#41529); +#41524 = PLANE('',#41525); +#41525 = AXIS2_PLACEMENT_3D('',#41526,#41527,#41528); +#41526 = CARTESIAN_POINT('',(166.687231,-133.096793,0.)); +#41527 = DIRECTION('',(-6.302827363143E-05,-0.999999998014,0.)); +#41528 = DIRECTION('',(-0.999999998014,6.302827363143E-05,0.)); +#41529 = DEFINITIONAL_REPRESENTATION('',(#41530),#41534); +#41530 = LINE('',#41531,#41532); +#41531 = CARTESIAN_POINT('',(0.,0.)); +#41532 = VECTOR('',#41533,1.); +#41533 = DIRECTION('',(1.,0.)); +#41534 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41535 = ORIENTED_EDGE('',*,*,#41536,.T.); +#41536 = EDGE_CURVE('',#41509,#41537,#41539,.T.); +#41537 = VERTEX_POINT('',#41538); +#41538 = CARTESIAN_POINT('',(138.601875,-132.764031,0.)); +#41539 = SURFACE_CURVE('',#41540,(#41544,#41551),.PCURVE_S1.); +#41540 = LINE('',#41541,#41542); +#41541 = CARTESIAN_POINT('',(138.620462,-133.095024,0.)); +#41542 = VECTOR('',#41543,1.); +#41543 = DIRECTION('',(-5.606693457932E-02,0.998427012278,0.)); +#41544 = PCURVE('',#40728,#41545); +#41545 = DEFINITIONAL_REPRESENTATION('',(#41546),#41550); +#41546 = LINE('',#41547,#41548); +#41547 = CARTESIAN_POINT('',(14.028029067017,-43.97524868659)); +#41548 = VECTOR('',#41549,1.); +#41549 = DIRECTION('',(5.606693457932E-02,0.998427012278)); +#41550 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41551 = PCURVE('',#41552,#41557); +#41552 = PLANE('',#41553); +#41553 = AXIS2_PLACEMENT_3D('',#41554,#41555,#41556); +#41554 = CARTESIAN_POINT('',(138.620462,-133.095024,0.)); +#41555 = DIRECTION('',(-0.998427012278,-5.606693457932E-02,0.)); +#41556 = DIRECTION('',(-5.606693457932E-02,0.998427012278,0.)); +#41557 = DEFINITIONAL_REPRESENTATION('',(#41558),#41562); +#41558 = LINE('',#41559,#41560); +#41559 = CARTESIAN_POINT('',(0.,0.)); +#41560 = VECTOR('',#41561,1.); +#41561 = DIRECTION('',(1.,0.)); +#41562 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41563 = ORIENTED_EDGE('',*,*,#41564,.T.); +#41564 = EDGE_CURVE('',#41537,#41565,#41567,.T.); +#41565 = VERTEX_POINT('',#41566); +#41566 = CARTESIAN_POINT('',(138.546346,-132.4372,0.)); +#41567 = SURFACE_CURVE('',#41568,(#41572,#41579),.PCURVE_S1.); +#41568 = LINE('',#41569,#41570); +#41569 = CARTESIAN_POINT('',(138.601875,-132.764031,0.)); +#41570 = VECTOR('',#41571,1.); +#41571 = DIRECTION('',(-0.167500886209,0.985871925312,0.)); +#41572 = PCURVE('',#40728,#41573); +#41573 = DEFINITIONAL_REPRESENTATION('',(#41574),#41578); +#41574 = LINE('',#41575,#41576); +#41575 = CARTESIAN_POINT('',(14.046616067017,-43.64425568659)); +#41576 = VECTOR('',#41577,1.); +#41577 = DIRECTION('',(0.167500886209,0.985871925312)); +#41578 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41579 = PCURVE('',#41580,#41585); +#41580 = PLANE('',#41581); +#41581 = AXIS2_PLACEMENT_3D('',#41582,#41583,#41584); +#41582 = CARTESIAN_POINT('',(138.601875,-132.764031,0.)); +#41583 = DIRECTION('',(-0.985871925312,-0.167500886209,0.)); +#41584 = DIRECTION('',(-0.167500886209,0.985871925312,0.)); +#41585 = DEFINITIONAL_REPRESENTATION('',(#41586),#41590); +#41586 = LINE('',#41587,#41588); +#41587 = CARTESIAN_POINT('',(0.,0.)); +#41588 = VECTOR('',#41589,1.); +#41589 = DIRECTION('',(1.,0.)); +#41590 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41591 = ORIENTED_EDGE('',*,*,#41592,.T.); +#41592 = EDGE_CURVE('',#41565,#41593,#41595,.T.); +#41593 = VERTEX_POINT('',#41594); +#41594 = CARTESIAN_POINT('',(138.454572,-132.118641,0.)); +#41595 = SURFACE_CURVE('',#41596,(#41600,#41607),.PCURVE_S1.); +#41596 = LINE('',#41597,#41598); +#41597 = CARTESIAN_POINT('',(138.546346,-132.4372,0.)); +#41598 = VECTOR('',#41599,1.); +#41599 = DIRECTION('',(-0.276831982772,0.960918338525,0.)); +#41600 = PCURVE('',#40728,#41601); +#41601 = DEFINITIONAL_REPRESENTATION('',(#41602),#41606); +#41602 = LINE('',#41603,#41604); +#41603 = CARTESIAN_POINT('',(14.102145067017,-43.31742468659)); +#41604 = VECTOR('',#41605,1.); +#41605 = DIRECTION('',(0.276831982772,0.960918338525)); +#41606 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41607 = PCURVE('',#41608,#41613); +#41608 = PLANE('',#41609); +#41609 = AXIS2_PLACEMENT_3D('',#41610,#41611,#41612); +#41610 = CARTESIAN_POINT('',(138.546346,-132.4372,0.)); +#41611 = DIRECTION('',(-0.960918338525,-0.276831982772,0.)); +#41612 = DIRECTION('',(-0.276831982772,0.960918338525,0.)); +#41613 = DEFINITIONAL_REPRESENTATION('',(#41614),#41618); +#41614 = LINE('',#41615,#41616); +#41615 = CARTESIAN_POINT('',(0.,0.)); +#41616 = VECTOR('',#41617,1.); +#41617 = DIRECTION('',(1.,0.)); +#41618 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41619 = ORIENTED_EDGE('',*,*,#41620,.T.); +#41620 = EDGE_CURVE('',#41593,#41621,#41623,.T.); +#41621 = VERTEX_POINT('',#41622); +#41622 = CARTESIAN_POINT('',(138.327707,-131.812361,0.)); +#41623 = SURFACE_CURVE('',#41624,(#41628,#41635),.PCURVE_S1.); +#41624 = LINE('',#41625,#41626); +#41625 = CARTESIAN_POINT('',(138.454572,-132.118641,0.)); +#41626 = VECTOR('',#41627,1.); +#41627 = DIRECTION('',(-0.382682583012,0.923879884324,0.)); +#41628 = PCURVE('',#40728,#41629); +#41629 = DEFINITIONAL_REPRESENTATION('',(#41630),#41634); +#41630 = LINE('',#41631,#41632); +#41631 = CARTESIAN_POINT('',(14.193919067017,-42.99886568659)); +#41632 = VECTOR('',#41633,1.); +#41633 = DIRECTION('',(0.382682583012,0.923879884324)); +#41634 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41635 = PCURVE('',#41636,#41641); +#41636 = PLANE('',#41637); +#41637 = AXIS2_PLACEMENT_3D('',#41638,#41639,#41640); +#41638 = CARTESIAN_POINT('',(138.454572,-132.118641,0.)); +#41639 = DIRECTION('',(-0.923879884324,-0.382682583012,0.)); +#41640 = DIRECTION('',(-0.382682583012,0.923879884324,0.)); +#41641 = DEFINITIONAL_REPRESENTATION('',(#41642),#41646); +#41642 = LINE('',#41643,#41644); +#41643 = CARTESIAN_POINT('',(0.,0.)); +#41644 = VECTOR('',#41645,1.); +#41645 = DIRECTION('',(1.,0.)); +#41646 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41647 = ORIENTED_EDGE('',*,*,#41648,.T.); +#41648 = EDGE_CURVE('',#41621,#41649,#41651,.T.); +#41649 = VERTEX_POINT('',#41650); +#41650 = CARTESIAN_POINT('',(138.167348,-131.522211,0.)); +#41651 = SURFACE_CURVE('',#41652,(#41656,#41663),.PCURVE_S1.); +#41652 = LINE('',#41653,#41654); +#41653 = CARTESIAN_POINT('',(138.327707,-131.812361,0.)); +#41654 = VECTOR('',#41655,1.); +#41655 = DIRECTION('',(-0.48371602954,0.875225001223,0.)); +#41656 = PCURVE('',#40728,#41657); +#41657 = DEFINITIONAL_REPRESENTATION('',(#41658),#41662); +#41658 = LINE('',#41659,#41660); +#41659 = CARTESIAN_POINT('',(14.320784067017,-42.69258568659)); +#41660 = VECTOR('',#41661,1.); +#41661 = DIRECTION('',(0.48371602954,0.875225001223)); +#41662 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41663 = PCURVE('',#41664,#41669); +#41664 = PLANE('',#41665); +#41665 = AXIS2_PLACEMENT_3D('',#41666,#41667,#41668); +#41666 = CARTESIAN_POINT('',(138.327707,-131.812361,0.)); +#41667 = DIRECTION('',(-0.875225001223,-0.48371602954,0.)); +#41668 = DIRECTION('',(-0.48371602954,0.875225001223,0.)); +#41669 = DEFINITIONAL_REPRESENTATION('',(#41670),#41674); +#41670 = LINE('',#41671,#41672); +#41671 = CARTESIAN_POINT('',(0.,0.)); +#41672 = VECTOR('',#41673,1.); +#41673 = DIRECTION('',(1.,0.)); +#41674 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41675 = ORIENTED_EDGE('',*,*,#41676,.T.); +#41676 = EDGE_CURVE('',#41649,#41677,#41679,.T.); +#41677 = VERTEX_POINT('',#41678); +#41678 = CARTESIAN_POINT('',(137.97551,-131.25184,0.)); +#41679 = SURFACE_CURVE('',#41680,(#41684,#41691),.PCURVE_S1.); +#41680 = LINE('',#41681,#41682); +#41681 = CARTESIAN_POINT('',(138.167348,-131.522211,0.)); +#41682 = VECTOR('',#41683,1.); +#41683 = DIRECTION('',(-0.578670383383,0.815561516622,0.)); +#41684 = PCURVE('',#40728,#41685); +#41685 = DEFINITIONAL_REPRESENTATION('',(#41686),#41690); +#41686 = LINE('',#41687,#41688); +#41687 = CARTESIAN_POINT('',(14.481143067017,-42.40243568659)); +#41688 = VECTOR('',#41689,1.); +#41689 = DIRECTION('',(0.578670383383,0.815561516622)); +#41690 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41691 = PCURVE('',#41692,#41697); +#41692 = PLANE('',#41693); +#41693 = AXIS2_PLACEMENT_3D('',#41694,#41695,#41696); +#41694 = CARTESIAN_POINT('',(138.167348,-131.522211,0.)); +#41695 = DIRECTION('',(-0.815561516622,-0.578670383383,0.)); +#41696 = DIRECTION('',(-0.578670383383,0.815561516622,0.)); +#41697 = DEFINITIONAL_REPRESENTATION('',(#41698),#41702); +#41698 = LINE('',#41699,#41700); +#41699 = CARTESIAN_POINT('',(0.,0.)); +#41700 = VECTOR('',#41701,1.); +#41701 = DIRECTION('',(1.,0.)); +#41702 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41703 = ORIENTED_EDGE('',*,*,#41704,.T.); +#41704 = EDGE_CURVE('',#41677,#41705,#41707,.T.); +#41705 = VERTEX_POINT('',#41706); +#41706 = CARTESIAN_POINT('',(137.754606,-131.004649,0.)); +#41707 = SURFACE_CURVE('',#41708,(#41712,#41719),.PCURVE_S1.); +#41708 = LINE('',#41709,#41710); +#41709 = CARTESIAN_POINT('',(137.97551,-131.25184,0.)); +#41710 = VECTOR('',#41711,1.); +#41711 = DIRECTION('',(-0.666347612225,0.745641240599,0.)); +#41712 = PCURVE('',#40728,#41713); +#41713 = DEFINITIONAL_REPRESENTATION('',(#41714),#41718); +#41714 = LINE('',#41715,#41716); +#41715 = CARTESIAN_POINT('',(14.672981067017,-42.13206468659)); +#41716 = VECTOR('',#41717,1.); +#41717 = DIRECTION('',(0.666347612225,0.745641240599)); +#41718 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41719 = PCURVE('',#41720,#41725); +#41720 = PLANE('',#41721); +#41721 = AXIS2_PLACEMENT_3D('',#41722,#41723,#41724); +#41722 = CARTESIAN_POINT('',(137.97551,-131.25184,0.)); +#41723 = DIRECTION('',(-0.745641240599,-0.666347612225,0.)); +#41724 = DIRECTION('',(-0.666347612225,0.745641240599,0.)); +#41725 = DEFINITIONAL_REPRESENTATION('',(#41726),#41730); +#41726 = LINE('',#41727,#41728); +#41727 = CARTESIAN_POINT('',(0.,0.)); +#41728 = VECTOR('',#41729,1.); +#41729 = DIRECTION('',(1.,0.)); +#41730 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41731 = ORIENTED_EDGE('',*,*,#41732,.T.); +#41732 = EDGE_CURVE('',#41705,#41733,#41735,.T.); +#41733 = VERTEX_POINT('',#41734); +#41734 = CARTESIAN_POINT('',(137.507415,-130.783745,0.)); +#41735 = SURFACE_CURVE('',#41736,(#41740,#41747),.PCURVE_S1.); +#41736 = LINE('',#41737,#41738); +#41737 = CARTESIAN_POINT('',(137.754606,-131.004649,0.)); +#41738 = VECTOR('',#41739,1.); +#41739 = DIRECTION('',(-0.745641240599,0.666347612224,0.)); +#41740 = PCURVE('',#40728,#41741); +#41741 = DEFINITIONAL_REPRESENTATION('',(#41742),#41746); +#41742 = LINE('',#41743,#41744); +#41743 = CARTESIAN_POINT('',(14.893885067017,-41.88487368659)); +#41744 = VECTOR('',#41745,1.); +#41745 = DIRECTION('',(0.745641240599,0.666347612224)); +#41746 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41747 = PCURVE('',#41748,#41753); +#41748 = PLANE('',#41749); +#41749 = AXIS2_PLACEMENT_3D('',#41750,#41751,#41752); +#41750 = CARTESIAN_POINT('',(137.754606,-131.004649,0.)); +#41751 = DIRECTION('',(-0.666347612224,-0.745641240599,0.)); +#41752 = DIRECTION('',(-0.745641240599,0.666347612224,0.)); +#41753 = DEFINITIONAL_REPRESENTATION('',(#41754),#41758); +#41754 = LINE('',#41755,#41756); +#41755 = CARTESIAN_POINT('',(0.,0.)); +#41756 = VECTOR('',#41757,1.); +#41757 = DIRECTION('',(1.,0.)); +#41758 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41759 = ORIENTED_EDGE('',*,*,#41760,.T.); +#41760 = EDGE_CURVE('',#41733,#41761,#41763,.T.); +#41761 = VERTEX_POINT('',#41762); +#41762 = CARTESIAN_POINT('',(137.237044,-130.591908,0.)); +#41763 = SURFACE_CURVE('',#41764,(#41768,#41775),.PCURVE_S1.); +#41764 = LINE('',#41765,#41766); +#41765 = CARTESIAN_POINT('',(137.507415,-130.783745,0.)); +#41766 = VECTOR('',#41767,1.); +#41767 = DIRECTION('',(-0.815562940211,0.578668377013,0.)); +#41768 = PCURVE('',#40728,#41769); +#41769 = DEFINITIONAL_REPRESENTATION('',(#41770),#41774); +#41770 = LINE('',#41771,#41772); +#41771 = CARTESIAN_POINT('',(15.141076067017,-41.66396968659)); +#41772 = VECTOR('',#41773,1.); +#41773 = DIRECTION('',(0.815562940211,0.578668377013)); +#41774 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41775 = PCURVE('',#41776,#41781); +#41776 = PLANE('',#41777); +#41777 = AXIS2_PLACEMENT_3D('',#41778,#41779,#41780); +#41778 = CARTESIAN_POINT('',(137.507415,-130.783745,0.)); +#41779 = DIRECTION('',(-0.578668377013,-0.815562940211,0.)); +#41780 = DIRECTION('',(-0.815562940211,0.578668377013,0.)); +#41781 = DEFINITIONAL_REPRESENTATION('',(#41782),#41786); +#41782 = LINE('',#41783,#41784); +#41783 = CARTESIAN_POINT('',(0.,0.)); +#41784 = VECTOR('',#41785,1.); +#41785 = DIRECTION('',(1.,0.)); +#41786 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41787 = ORIENTED_EDGE('',*,*,#41788,.T.); +#41788 = EDGE_CURVE('',#41761,#41789,#41791,.T.); +#41789 = VERTEX_POINT('',#41790); +#41790 = CARTESIAN_POINT('',(136.946894,-130.431548,0.)); +#41791 = SURFACE_CURVE('',#41792,(#41796,#41803),.PCURVE_S1.); +#41792 = LINE('',#41793,#41794); +#41793 = CARTESIAN_POINT('',(137.237044,-130.591908,0.)); +#41794 = VECTOR('',#41795,1.); +#41795 = DIRECTION('',(-0.875223724173,0.483718340198,0.)); +#41796 = PCURVE('',#40728,#41797); +#41797 = DEFINITIONAL_REPRESENTATION('',(#41798),#41802); +#41798 = LINE('',#41799,#41800); +#41799 = CARTESIAN_POINT('',(15.411447067017,-41.47213268659)); +#41800 = VECTOR('',#41801,1.); +#41801 = DIRECTION('',(0.875223724173,0.483718340198)); +#41802 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41803 = PCURVE('',#41804,#41809); +#41804 = PLANE('',#41805); +#41805 = AXIS2_PLACEMENT_3D('',#41806,#41807,#41808); +#41806 = CARTESIAN_POINT('',(137.237044,-130.591908,0.)); +#41807 = DIRECTION('',(-0.483718340198,-0.875223724173,0.)); +#41808 = DIRECTION('',(-0.875223724173,0.483718340198,0.)); +#41809 = DEFINITIONAL_REPRESENTATION('',(#41810),#41814); +#41810 = LINE('',#41811,#41812); +#41811 = CARTESIAN_POINT('',(0.,0.)); +#41812 = VECTOR('',#41813,1.); +#41813 = DIRECTION('',(1.,0.)); +#41814 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41815 = ORIENTED_EDGE('',*,*,#41816,.T.); +#41816 = EDGE_CURVE('',#41789,#41817,#41819,.T.); +#41817 = VERTEX_POINT('',#41818); +#41818 = CARTESIAN_POINT('',(136.640614,-130.304684,0.)); +#41819 = SURFACE_CURVE('',#41820,(#41824,#41831),.PCURVE_S1.); +#41820 = LINE('',#41821,#41822); +#41821 = CARTESIAN_POINT('',(136.946894,-130.431548,0.)); +#41822 = VECTOR('',#41823,1.); +#41823 = DIRECTION('',(-0.923880950798,0.3826800083,0.)); +#41824 = PCURVE('',#40728,#41825); +#41825 = DEFINITIONAL_REPRESENTATION('',(#41826),#41830); +#41826 = LINE('',#41827,#41828); +#41827 = CARTESIAN_POINT('',(15.701597067017,-41.31177268659)); +#41828 = VECTOR('',#41829,1.); +#41829 = DIRECTION('',(0.923880950798,0.3826800083)); +#41830 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41831 = PCURVE('',#41832,#41837); +#41832 = PLANE('',#41833); +#41833 = AXIS2_PLACEMENT_3D('',#41834,#41835,#41836); +#41834 = CARTESIAN_POINT('',(136.946894,-130.431548,0.)); +#41835 = DIRECTION('',(-0.3826800083,-0.923880950798,0.)); +#41836 = DIRECTION('',(-0.923880950798,0.3826800083,0.)); +#41837 = DEFINITIONAL_REPRESENTATION('',(#41838),#41842); +#41838 = LINE('',#41839,#41840); +#41839 = CARTESIAN_POINT('',(0.,0.)); +#41840 = VECTOR('',#41841,1.); +#41841 = DIRECTION('',(1.,0.)); +#41842 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41843 = ORIENTED_EDGE('',*,*,#41844,.T.); +#41844 = EDGE_CURVE('',#41817,#41845,#41847,.T.); +#41845 = VERTEX_POINT('',#41846); +#41846 = CARTESIAN_POINT('',(136.322055,-130.21291,0.)); +#41847 = SURFACE_CURVE('',#41848,(#41852,#41859),.PCURVE_S1.); +#41848 = LINE('',#41849,#41850); +#41849 = CARTESIAN_POINT('',(136.640614,-130.304684,0.)); +#41850 = VECTOR('',#41851,1.); +#41851 = DIRECTION('',(-0.960918338525,0.276831982772,0.)); +#41852 = PCURVE('',#40728,#41853); +#41853 = DEFINITIONAL_REPRESENTATION('',(#41854),#41858); +#41854 = LINE('',#41855,#41856); +#41855 = CARTESIAN_POINT('',(16.007877067017,-41.18490868659)); +#41856 = VECTOR('',#41857,1.); +#41857 = DIRECTION('',(0.960918338525,0.276831982772)); +#41858 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41859 = PCURVE('',#41860,#41865); +#41860 = PLANE('',#41861); +#41861 = AXIS2_PLACEMENT_3D('',#41862,#41863,#41864); +#41862 = CARTESIAN_POINT('',(136.640614,-130.304684,0.)); +#41863 = DIRECTION('',(-0.276831982772,-0.960918338525,0.)); +#41864 = DIRECTION('',(-0.960918338525,0.276831982772,0.)); +#41865 = DEFINITIONAL_REPRESENTATION('',(#41866),#41870); +#41866 = LINE('',#41867,#41868); +#41867 = CARTESIAN_POINT('',(0.,0.)); +#41868 = VECTOR('',#41869,1.); +#41869 = DIRECTION('',(1.,0.)); +#41870 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41871 = ORIENTED_EDGE('',*,*,#41872,.T.); +#41872 = EDGE_CURVE('',#41845,#41873,#41875,.T.); +#41873 = VERTEX_POINT('',#41874); +#41874 = CARTESIAN_POINT('',(135.995224,-130.157381,0.)); +#41875 = SURFACE_CURVE('',#41876,(#41880,#41887),.PCURVE_S1.); +#41876 = LINE('',#41877,#41878); +#41877 = CARTESIAN_POINT('',(136.322055,-130.21291,0.)); +#41878 = VECTOR('',#41879,1.); +#41879 = DIRECTION('',(-0.985871925312,0.167500886209,0.)); +#41880 = PCURVE('',#40728,#41881); +#41881 = DEFINITIONAL_REPRESENTATION('',(#41882),#41886); +#41882 = LINE('',#41883,#41884); +#41883 = CARTESIAN_POINT('',(16.326436067017,-41.09313468659)); +#41884 = VECTOR('',#41885,1.); +#41885 = DIRECTION('',(0.985871925312,0.167500886209)); +#41886 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41887 = PCURVE('',#41888,#41893); +#41888 = PLANE('',#41889); +#41889 = AXIS2_PLACEMENT_3D('',#41890,#41891,#41892); +#41890 = CARTESIAN_POINT('',(136.322055,-130.21291,0.)); +#41891 = DIRECTION('',(-0.167500886209,-0.985871925312,0.)); +#41892 = DIRECTION('',(-0.985871925312,0.167500886209,0.)); +#41893 = DEFINITIONAL_REPRESENTATION('',(#41894),#41898); +#41894 = LINE('',#41895,#41896); +#41895 = CARTESIAN_POINT('',(0.,0.)); +#41896 = VECTOR('',#41897,1.); +#41897 = DIRECTION('',(1.,0.)); +#41898 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41899 = ORIENTED_EDGE('',*,*,#41900,.T.); +#41900 = EDGE_CURVE('',#41873,#41901,#41903,.T.); +#41901 = VERTEX_POINT('',#41902); +#41902 = CARTESIAN_POINT('',(135.664231,-130.138793,0.)); +#41903 = SURFACE_CURVE('',#41904,(#41908,#41915),.PCURVE_S1.); +#41904 = LINE('',#41905,#41906); +#41905 = CARTESIAN_POINT('',(135.995224,-130.157381,0.)); +#41906 = VECTOR('',#41907,1.); +#41907 = DIRECTION('',(-0.998426843416,5.60699415559E-02,0.)); +#41908 = PCURVE('',#40728,#41909); +#41909 = DEFINITIONAL_REPRESENTATION('',(#41910),#41914); +#41910 = LINE('',#41911,#41912); +#41911 = CARTESIAN_POINT('',(16.653267067017,-41.03760568659)); +#41912 = VECTOR('',#41913,1.); +#41913 = DIRECTION('',(0.998426843416,5.60699415559E-02)); +#41914 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41915 = PCURVE('',#41916,#41921); +#41916 = PLANE('',#41917); +#41917 = AXIS2_PLACEMENT_3D('',#41918,#41919,#41920); +#41918 = CARTESIAN_POINT('',(135.995224,-130.157381,0.)); +#41919 = DIRECTION('',(-5.60699415559E-02,-0.998426843416,0.)); +#41920 = DIRECTION('',(-0.998426843416,5.60699415559E-02,0.)); +#41921 = DEFINITIONAL_REPRESENTATION('',(#41922),#41926); +#41922 = LINE('',#41923,#41924); +#41923 = CARTESIAN_POINT('',(0.,0.)); +#41924 = VECTOR('',#41925,1.); +#41925 = DIRECTION('',(1.,0.)); +#41926 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41927 = ORIENTED_EDGE('',*,*,#41928,.T.); +#41928 = EDGE_CURVE('',#41901,#41929,#41931,.T.); +#41929 = VERTEX_POINT('',#41930); +#41930 = CARTESIAN_POINT('',(135.572231,-130.138793,0.)); +#41931 = SURFACE_CURVE('',#41932,(#41936,#41943),.PCURVE_S1.); +#41932 = LINE('',#41933,#41934); +#41933 = CARTESIAN_POINT('',(135.664231,-130.138793,0.)); +#41934 = VECTOR('',#41935,1.); +#41935 = DIRECTION('',(-1.,0.,0.)); +#41936 = PCURVE('',#40728,#41937); +#41937 = DEFINITIONAL_REPRESENTATION('',(#41938),#41942); +#41938 = LINE('',#41939,#41940); +#41939 = CARTESIAN_POINT('',(16.984260067017,-41.01901768659)); +#41940 = VECTOR('',#41941,1.); +#41941 = DIRECTION('',(1.,0.)); +#41942 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41943 = PCURVE('',#41944,#41949); +#41944 = PLANE('',#41945); +#41945 = AXIS2_PLACEMENT_3D('',#41946,#41947,#41948); +#41946 = CARTESIAN_POINT('',(135.664231,-130.138793,0.)); +#41947 = DIRECTION('',(0.,-1.,0.)); +#41948 = DIRECTION('',(-1.,0.,0.)); +#41949 = DEFINITIONAL_REPRESENTATION('',(#41950),#41954); +#41950 = LINE('',#41951,#41952); +#41951 = CARTESIAN_POINT('',(0.,-0.)); +#41952 = VECTOR('',#41953,1.); +#41953 = DIRECTION('',(1.,0.)); +#41954 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41955 = ORIENTED_EDGE('',*,*,#41956,.T.); +#41956 = EDGE_CURVE('',#41929,#41957,#41959,.T.); +#41957 = VERTEX_POINT('',#41958); +#41958 = CARTESIAN_POINT('',(132.193738,-49.37312,0.)); +#41959 = SURFACE_CURVE('',#41960,(#41964,#41971),.PCURVE_S1.); +#41960 = LINE('',#41961,#41962); +#41961 = CARTESIAN_POINT('',(135.572231,-130.138793,0.)); +#41962 = VECTOR('',#41963,1.); +#41963 = DIRECTION('',(-4.179425339229E-02,0.999126238462,0.)); +#41964 = PCURVE('',#40728,#41965); +#41965 = DEFINITIONAL_REPRESENTATION('',(#41966),#41970); +#41966 = LINE('',#41967,#41968); +#41967 = CARTESIAN_POINT('',(17.076260067017,-41.01901768659)); +#41968 = VECTOR('',#41969,1.); +#41969 = DIRECTION('',(4.179425339229E-02,0.999126238462)); +#41970 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41971 = PCURVE('',#41972,#41977); +#41972 = PLANE('',#41973); +#41973 = AXIS2_PLACEMENT_3D('',#41974,#41975,#41976); +#41974 = CARTESIAN_POINT('',(135.572231,-130.138793,0.)); +#41975 = DIRECTION('',(-0.999126238462,-4.179425339229E-02,0.)); +#41976 = DIRECTION('',(-4.179425339229E-02,0.999126238462,0.)); +#41977 = DEFINITIONAL_REPRESENTATION('',(#41978),#41982); +#41978 = LINE('',#41979,#41980); +#41979 = CARTESIAN_POINT('',(0.,0.)); +#41980 = VECTOR('',#41981,1.); +#41981 = DIRECTION('',(1.,0.)); +#41982 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41983 = ORIENTED_EDGE('',*,*,#41984,.T.); +#41984 = EDGE_CURVE('',#41957,#41985,#41987,.T.); +#41985 = VERTEX_POINT('',#41986); +#41986 = CARTESIAN_POINT('',(132.213127,-49.151487,0.)); +#41987 = SURFACE_CURVE('',#41988,(#41992,#41999),.PCURVE_S1.); +#41988 = LINE('',#41989,#41990); +#41989 = CARTESIAN_POINT('',(132.193738,-49.37312,0.)); +#41990 = VECTOR('',#41991,1.); +#41991 = DIRECTION('',(8.71496095114E-02,0.996195234661,0.)); +#41992 = PCURVE('',#40728,#41993); +#41993 = DEFINITIONAL_REPRESENTATION('',(#41994),#41998); +#41994 = LINE('',#41995,#41996); +#41995 = CARTESIAN_POINT('',(20.454753067017,39.746655313404)); +#41996 = VECTOR('',#41997,1.); +#41997 = DIRECTION('',(-8.71496095114E-02,0.996195234661)); +#41998 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#41999 = PCURVE('',#42000,#42005); +#42000 = PLANE('',#42001); +#42001 = AXIS2_PLACEMENT_3D('',#42002,#42003,#42004); +#42002 = CARTESIAN_POINT('',(132.193738,-49.37312,0.)); +#42003 = DIRECTION('',(-0.996195234661,8.71496095114E-02,0.)); +#42004 = DIRECTION('',(8.71496095114E-02,0.996195234661,0.)); +#42005 = DEFINITIONAL_REPRESENTATION('',(#42006),#42010); +#42006 = LINE('',#42007,#42008); +#42007 = CARTESIAN_POINT('',(0.,0.)); +#42008 = VECTOR('',#42009,1.); +#42009 = DIRECTION('',(1.,0.)); +#42010 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42011 = ORIENTED_EDGE('',*,*,#42012,.T.); +#42012 = EDGE_CURVE('',#41985,#42013,#42015,.T.); +#42013 = VERTEX_POINT('',#42014); +#42014 = CARTESIAN_POINT('',(132.270708,-48.936588,0.)); +#42015 = SURFACE_CURVE('',#42016,(#42020,#42027),.PCURVE_S1.); +#42016 = LINE('',#42017,#42018); +#42017 = CARTESIAN_POINT('',(132.213127,-49.151487,0.)); +#42018 = VECTOR('',#42019,1.); +#42019 = DIRECTION('',(0.258814794766,0.965926965153,0.)); +#42020 = PCURVE('',#40728,#42021); +#42021 = DEFINITIONAL_REPRESENTATION('',(#42022),#42026); +#42022 = LINE('',#42023,#42024); +#42023 = CARTESIAN_POINT('',(20.435364067017,39.968288313404)); +#42024 = VECTOR('',#42025,1.); +#42025 = DIRECTION('',(-0.258814794766,0.965926965153)); +#42026 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42027 = PCURVE('',#42028,#42033); +#42028 = PLANE('',#42029); +#42029 = AXIS2_PLACEMENT_3D('',#42030,#42031,#42032); +#42030 = CARTESIAN_POINT('',(132.213127,-49.151487,0.)); +#42031 = DIRECTION('',(-0.965926965153,0.258814794766,0.)); +#42032 = DIRECTION('',(0.258814794766,0.965926965153,0.)); +#42033 = DEFINITIONAL_REPRESENTATION('',(#42034),#42038); +#42034 = LINE('',#42035,#42036); +#42035 = CARTESIAN_POINT('',(0.,0.)); +#42036 = VECTOR('',#42037,1.); +#42037 = DIRECTION('',(1.,0.)); +#42038 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42039 = ORIENTED_EDGE('',*,*,#42040,.T.); +#42040 = EDGE_CURVE('',#42013,#42041,#42043,.T.); +#42041 = VERTEX_POINT('',#42042); +#42042 = CARTESIAN_POINT('',(132.364731,-48.734954,0.)); +#42043 = SURFACE_CURVE('',#42044,(#42048,#42055),.PCURVE_S1.); +#42044 = LINE('',#42045,#42046); +#42045 = CARTESIAN_POINT('',(132.270708,-48.936588,0.)); +#42046 = VECTOR('',#42047,1.); +#42047 = DIRECTION('',(0.422616495684,0.90630861056,0.)); +#42048 = PCURVE('',#40728,#42049); +#42049 = DEFINITIONAL_REPRESENTATION('',(#42050),#42054); +#42050 = LINE('',#42051,#42052); +#42051 = CARTESIAN_POINT('',(20.377783067017,40.183187313404)); +#42052 = VECTOR('',#42053,1.); +#42053 = DIRECTION('',(-0.422616495684,0.90630861056)); +#42054 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42055 = PCURVE('',#42056,#42061); +#42056 = PLANE('',#42057); +#42057 = AXIS2_PLACEMENT_3D('',#42058,#42059,#42060); +#42058 = CARTESIAN_POINT('',(132.270708,-48.936588,0.)); +#42059 = DIRECTION('',(-0.90630861056,0.422616495684,0.)); +#42060 = DIRECTION('',(0.422616495684,0.90630861056,0.)); +#42061 = DEFINITIONAL_REPRESENTATION('',(#42062),#42066); +#42062 = LINE('',#42063,#42064); +#42063 = CARTESIAN_POINT('',(0.,0.)); +#42064 = VECTOR('',#42065,1.); +#42065 = DIRECTION('',(1.,0.)); +#42066 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42067 = ORIENTED_EDGE('',*,*,#42068,.T.); +#42068 = EDGE_CURVE('',#42041,#42069,#42071,.T.); +#42069 = VERTEX_POINT('',#42070); +#42070 = CARTESIAN_POINT('',(132.492341,-48.55271,0.)); +#42071 = SURFACE_CURVE('',#42072,(#42076,#42083),.PCURVE_S1.); +#42072 = LINE('',#42073,#42074); +#42073 = CARTESIAN_POINT('',(132.364731,-48.734954,0.)); +#42074 = VECTOR('',#42075,1.); +#42075 = DIRECTION('',(0.573580590673,0.819149135386,0.)); +#42076 = PCURVE('',#40728,#42077); +#42077 = DEFINITIONAL_REPRESENTATION('',(#42078),#42082); +#42078 = LINE('',#42079,#42080); +#42079 = CARTESIAN_POINT('',(20.283760067017,40.384821313404)); +#42080 = VECTOR('',#42081,1.); +#42081 = DIRECTION('',(-0.573580590673,0.819149135386)); +#42082 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42083 = PCURVE('',#42084,#42089); +#42084 = PLANE('',#42085); +#42085 = AXIS2_PLACEMENT_3D('',#42086,#42087,#42088); +#42086 = CARTESIAN_POINT('',(132.364731,-48.734954,0.)); +#42087 = DIRECTION('',(-0.819149135386,0.573580590673,0.)); +#42088 = DIRECTION('',(0.573580590673,0.819149135386,0.)); +#42089 = DEFINITIONAL_REPRESENTATION('',(#42090),#42094); +#42090 = LINE('',#42091,#42092); +#42091 = CARTESIAN_POINT('',(0.,0.)); +#42092 = VECTOR('',#42093,1.); +#42093 = DIRECTION('',(1.,0.)); +#42094 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42095 = ORIENTED_EDGE('',*,*,#42096,.T.); +#42096 = EDGE_CURVE('',#42069,#42097,#42099,.T.); +#42097 = VERTEX_POINT('',#42098); +#42098 = CARTESIAN_POINT('',(132.649658,-48.395394,0.)); +#42099 = SURFACE_CURVE('',#42100,(#42104,#42111),.PCURVE_S1.); +#42100 = LINE('',#42101,#42102); +#42101 = CARTESIAN_POINT('',(132.492341,-48.55271,0.)); +#42102 = VECTOR('',#42103,1.); +#42103 = DIRECTION('',(0.707109028585,0.707104533781,0.)); +#42104 = PCURVE('',#40728,#42105); +#42105 = DEFINITIONAL_REPRESENTATION('',(#42106),#42110); +#42106 = LINE('',#42107,#42108); +#42107 = CARTESIAN_POINT('',(20.156150067017,40.567065313404)); +#42108 = VECTOR('',#42109,1.); +#42109 = DIRECTION('',(-0.707109028585,0.707104533781)); +#42110 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42111 = PCURVE('',#42112,#42117); +#42112 = PLANE('',#42113); +#42113 = AXIS2_PLACEMENT_3D('',#42114,#42115,#42116); +#42114 = CARTESIAN_POINT('',(132.492341,-48.55271,0.)); +#42115 = DIRECTION('',(-0.707104533781,0.707109028585,0.)); +#42116 = DIRECTION('',(0.707109028585,0.707104533781,0.)); +#42117 = DEFINITIONAL_REPRESENTATION('',(#42118),#42122); +#42118 = LINE('',#42119,#42120); +#42119 = CARTESIAN_POINT('',(0.,0.)); +#42120 = VECTOR('',#42121,1.); +#42121 = DIRECTION('',(1.,0.)); +#42122 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42123 = ORIENTED_EDGE('',*,*,#42124,.T.); +#42124 = EDGE_CURVE('',#42097,#42125,#42127,.T.); +#42125 = VERTEX_POINT('',#42126); +#42126 = CARTESIAN_POINT('',(132.831904,-48.267786,0.)); +#42127 = SURFACE_CURVE('',#42128,(#42132,#42139),.PCURVE_S1.); +#42128 = LINE('',#42129,#42130); +#42129 = CARTESIAN_POINT('',(132.649658,-48.395394,0.)); +#42130 = VECTOR('',#42131,1.); +#42131 = DIRECTION('',(0.819156316572,0.57357033485,0.)); +#42132 = PCURVE('',#40728,#42133); +#42133 = DEFINITIONAL_REPRESENTATION('',(#42134),#42138); +#42134 = LINE('',#42135,#42136); +#42135 = CARTESIAN_POINT('',(19.998833067017,40.724381313404)); +#42136 = VECTOR('',#42137,1.); +#42137 = DIRECTION('',(-0.819156316572,0.57357033485)); +#42138 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42139 = PCURVE('',#42140,#42145); +#42140 = PLANE('',#42141); +#42141 = AXIS2_PLACEMENT_3D('',#42142,#42143,#42144); +#42142 = CARTESIAN_POINT('',(132.649658,-48.395394,0.)); +#42143 = DIRECTION('',(-0.57357033485,0.819156316572,0.)); +#42144 = DIRECTION('',(0.819156316572,0.57357033485,0.)); +#42145 = DEFINITIONAL_REPRESENTATION('',(#42146),#42150); +#42146 = LINE('',#42147,#42148); +#42147 = CARTESIAN_POINT('',(0.,0.)); +#42148 = VECTOR('',#42149,1.); +#42149 = DIRECTION('',(1.,0.)); +#42150 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42151 = ORIENTED_EDGE('',*,*,#42152,.T.); +#42152 = EDGE_CURVE('',#42125,#42153,#42155,.T.); +#42153 = VERTEX_POINT('',#42154); +#42154 = CARTESIAN_POINT('',(133.03354,-48.173765,0.)); +#42155 = SURFACE_CURVE('',#42156,(#42160,#42167),.PCURVE_S1.); +#42156 = LINE('',#42157,#42158); +#42157 = CARTESIAN_POINT('',(132.831904,-48.267786,0.)); +#42158 = VECTOR('',#42159,1.); +#42159 = DIRECTION('',(0.906313659287,0.422605668431,0.)); +#42160 = PCURVE('',#40728,#42161); +#42161 = DEFINITIONAL_REPRESENTATION('',(#42162),#42166); +#42162 = LINE('',#42163,#42164); +#42163 = CARTESIAN_POINT('',(19.816587067017,40.851989313404)); +#42164 = VECTOR('',#42165,1.); +#42165 = DIRECTION('',(-0.906313659287,0.422605668431)); +#42166 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42167 = PCURVE('',#42168,#42173); +#42168 = PLANE('',#42169); +#42169 = AXIS2_PLACEMENT_3D('',#42170,#42171,#42172); +#42170 = CARTESIAN_POINT('',(132.831904,-48.267786,0.)); +#42171 = DIRECTION('',(-0.422605668431,0.906313659287,0.)); +#42172 = DIRECTION('',(0.906313659287,0.422605668431,0.)); +#42173 = DEFINITIONAL_REPRESENTATION('',(#42174),#42178); +#42174 = LINE('',#42175,#42176); +#42175 = CARTESIAN_POINT('',(0.,0.)); +#42176 = VECTOR('',#42177,1.); +#42177 = DIRECTION('',(1.,0.)); +#42178 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42179 = ORIENTED_EDGE('',*,*,#42180,.T.); +#42180 = EDGE_CURVE('',#42153,#42181,#42183,.T.); +#42181 = VERTEX_POINT('',#42182); +#42182 = CARTESIAN_POINT('',(133.248439,-48.116186,0.)); +#42183 = SURFACE_CURVE('',#42184,(#42188,#42195),.PCURVE_S1.); +#42184 = LINE('',#42185,#42186); +#42185 = CARTESIAN_POINT('',(133.03354,-48.173765,0.)); +#42186 = VECTOR('',#42187,1.); +#42187 = DIRECTION('',(0.965929212485,0.258806407315,0.)); +#42188 = PCURVE('',#40728,#42189); +#42189 = DEFINITIONAL_REPRESENTATION('',(#42190),#42194); +#42190 = LINE('',#42191,#42192); +#42191 = CARTESIAN_POINT('',(19.614951067017,40.946010313404)); +#42192 = VECTOR('',#42193,1.); +#42193 = DIRECTION('',(-0.965929212485,0.258806407315)); +#42194 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42195 = PCURVE('',#42196,#42201); +#42196 = PLANE('',#42197); +#42197 = AXIS2_PLACEMENT_3D('',#42198,#42199,#42200); +#42198 = CARTESIAN_POINT('',(133.03354,-48.173765,0.)); +#42199 = DIRECTION('',(-0.258806407315,0.965929212485,0.)); +#42200 = DIRECTION('',(0.965929212485,0.258806407315,0.)); +#42201 = DEFINITIONAL_REPRESENTATION('',(#42202),#42206); +#42202 = LINE('',#42203,#42204); +#42203 = CARTESIAN_POINT('',(0.,0.)); +#42204 = VECTOR('',#42205,1.); +#42205 = DIRECTION('',(1.,0.)); +#42206 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42207 = ORIENTED_EDGE('',*,*,#42208,.T.); +#42208 = EDGE_CURVE('',#42181,#42209,#42211,.T.); +#42209 = VERTEX_POINT('',#42210); +#42210 = CARTESIAN_POINT('',(133.470072,-48.096786,0.)); +#42211 = SURFACE_CURVE('',#42212,(#42216,#42223),.PCURVE_S1.); +#42212 = LINE('',#42213,#42214); +#42213 = CARTESIAN_POINT('',(133.248439,-48.116186,0.)); +#42214 = VECTOR('',#42215,1.); +#42215 = DIRECTION('',(0.996190940949,8.719867643536E-02,0.)); +#42216 = PCURVE('',#40728,#42217); +#42217 = DEFINITIONAL_REPRESENTATION('',(#42218),#42222); +#42218 = LINE('',#42219,#42220); +#42219 = CARTESIAN_POINT('',(19.400052067017,41.003589313404)); +#42220 = VECTOR('',#42221,1.); +#42221 = DIRECTION('',(-0.996190940949,8.719867643536E-02)); +#42222 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42223 = PCURVE('',#42224,#42229); +#42224 = PLANE('',#42225); +#42225 = AXIS2_PLACEMENT_3D('',#42226,#42227,#42228); +#42226 = CARTESIAN_POINT('',(133.248439,-48.116186,0.)); +#42227 = DIRECTION('',(-8.719867643536E-02,0.996190940949,0.)); +#42228 = DIRECTION('',(0.996190940949,8.719867643536E-02,0.)); +#42229 = DEFINITIONAL_REPRESENTATION('',(#42230),#42234); +#42230 = LINE('',#42231,#42232); +#42231 = CARTESIAN_POINT('',(0.,0.)); +#42232 = VECTOR('',#42233,1.); +#42233 = DIRECTION('',(1.,0.)); +#42234 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42235 = ORIENTED_EDGE('',*,*,#42236,.T.); +#42236 = EDGE_CURVE('',#42209,#40744,#42237,.T.); +#42237 = SURFACE_CURVE('',#42238,(#42242,#42249),.PCURVE_S1.); +#42238 = LINE('',#42239,#42240); +#42239 = CARTESIAN_POINT('',(133.470072,-48.096786,0.)); +#42240 = VECTOR('',#42241,1.); +#42241 = DIRECTION('',(1.,0.,0.)); +#42242 = PCURVE('',#40728,#42243); +#42243 = DEFINITIONAL_REPRESENTATION('',(#42244),#42248); +#42244 = LINE('',#42245,#42246); +#42245 = CARTESIAN_POINT('',(19.178419067017,41.022989313404)); +#42246 = VECTOR('',#42247,1.); +#42247 = DIRECTION('',(-1.,0.)); +#42248 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42249 = PCURVE('',#40761,#42250); +#42250 = DEFINITIONAL_REPRESENTATION('',(#42251),#42255); +#42251 = LINE('',#42252,#42253); +#42252 = CARTESIAN_POINT('',(0.,0.)); +#42253 = VECTOR('',#42254,1.); +#42254 = DIRECTION('',(1.,0.)); +#42255 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42256 = ORIENTED_EDGE('',*,*,#40795,.T.); +#42257 = FACE_BOUND('',#42258,.T.); +#42258 = EDGE_LOOP('',(#42259,#42289,#42317,#42345,#42373,#42401,#42429, + #42457,#42485,#42513,#42541,#42569,#42597,#42625,#42653,#42681, + #42709,#42737,#42765,#42793,#42821,#42849,#42877,#42905,#42933, + #42961,#42989,#43017,#43045,#43073,#43101,#43129,#43157,#43185, + #43213,#43241,#43269,#43297)); +#42259 = ORIENTED_EDGE('',*,*,#42260,.F.); +#42260 = EDGE_CURVE('',#42261,#42263,#42265,.T.); +#42261 = VERTEX_POINT('',#42262); +#42262 = CARTESIAN_POINT('',(167.777887,-50.067303,0.)); +#42263 = VERTEX_POINT('',#42264); +#42264 = CARTESIAN_POINT('',(168.005189,-50.128208,0.)); +#42265 = SURFACE_CURVE('',#42266,(#42270,#42277),.PCURVE_S1.); +#42266 = LINE('',#42267,#42268); +#42267 = CARTESIAN_POINT('',(167.777887,-50.067303,0.)); +#42268 = VECTOR('',#42269,1.); +#42269 = DIRECTION('',(0.965926237789,-0.25881750936,0.)); +#42270 = PCURVE('',#40728,#42271); +#42271 = DEFINITIONAL_REPRESENTATION('',(#42272),#42276); +#42272 = LINE('',#42273,#42274); +#42273 = CARTESIAN_POINT('',(-15.12939593298,39.052472313404)); +#42274 = VECTOR('',#42275,1.); +#42275 = DIRECTION('',(-0.965926237789,-0.25881750936)); +#42276 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42277 = PCURVE('',#42278,#42283); +#42278 = PLANE('',#42279); +#42279 = AXIS2_PLACEMENT_3D('',#42280,#42281,#42282); +#42280 = CARTESIAN_POINT('',(167.777887,-50.067303,0.)); +#42281 = DIRECTION('',(0.25881750936,0.965926237789,-0.)); +#42282 = DIRECTION('',(0.965926237789,-0.25881750936,0.)); +#42283 = DEFINITIONAL_REPRESENTATION('',(#42284),#42288); +#42284 = LINE('',#42285,#42286); +#42285 = CARTESIAN_POINT('',(0.,0.)); +#42286 = VECTOR('',#42287,1.); +#42287 = DIRECTION('',(1.,0.)); +#42288 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42289 = ORIENTED_EDGE('',*,*,#42290,.F.); +#42290 = EDGE_CURVE('',#42291,#42261,#42293,.T.); +#42291 = VERTEX_POINT('',#42292); +#42292 = CARTESIAN_POINT('',(167.543462,-50.046793,0.)); +#42293 = SURFACE_CURVE('',#42294,(#42298,#42305),.PCURVE_S1.); +#42294 = LINE('',#42295,#42296); +#42295 = CARTESIAN_POINT('',(167.543462,-50.046793,0.)); +#42296 = VECTOR('',#42297,1.); +#42297 = DIRECTION('',(0.996194524659,-8.715772507518E-02,0.)); +#42298 = PCURVE('',#40728,#42299); +#42299 = DEFINITIONAL_REPRESENTATION('',(#42300),#42304); +#42300 = LINE('',#42301,#42302); +#42301 = CARTESIAN_POINT('',(-14.89497093298,39.072982313404)); +#42302 = VECTOR('',#42303,1.); +#42303 = DIRECTION('',(-0.996194524659,-8.715772507518E-02)); +#42304 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42305 = PCURVE('',#42306,#42311); +#42306 = PLANE('',#42307); +#42307 = AXIS2_PLACEMENT_3D('',#42308,#42309,#42310); +#42308 = CARTESIAN_POINT('',(167.543462,-50.046793,0.)); +#42309 = DIRECTION('',(8.715772507518E-02,0.996194524659,-0.)); +#42310 = DIRECTION('',(0.996194524659,-8.715772507518E-02,0.)); +#42311 = DEFINITIONAL_REPRESENTATION('',(#42312),#42316); +#42312 = LINE('',#42313,#42314); +#42313 = CARTESIAN_POINT('',(0.,0.)); +#42314 = VECTOR('',#42315,1.); +#42315 = DIRECTION('',(1.,0.)); +#42316 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42317 = ORIENTED_EDGE('',*,*,#42318,.F.); +#42318 = EDGE_CURVE('',#42319,#42291,#42321,.T.); +#42319 = VERTEX_POINT('',#42320); +#42320 = CARTESIAN_POINT('',(166.743462,-50.046793,0.)); +#42321 = SURFACE_CURVE('',#42322,(#42326,#42333),.PCURVE_S1.); +#42322 = LINE('',#42323,#42324); +#42323 = CARTESIAN_POINT('',(166.743462,-50.046793,0.)); +#42324 = VECTOR('',#42325,1.); +#42325 = DIRECTION('',(1.,0.,0.)); +#42326 = PCURVE('',#40728,#42327); +#42327 = DEFINITIONAL_REPRESENTATION('',(#42328),#42332); +#42328 = LINE('',#42329,#42330); +#42329 = CARTESIAN_POINT('',(-14.09497093298,39.072982313404)); +#42330 = VECTOR('',#42331,1.); +#42331 = DIRECTION('',(-1.,0.)); +#42332 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42333 = PCURVE('',#42334,#42339); +#42334 = PLANE('',#42335); +#42335 = AXIS2_PLACEMENT_3D('',#42336,#42337,#42338); +#42336 = CARTESIAN_POINT('',(166.743462,-50.046793,0.)); +#42337 = DIRECTION('',(0.,1.,0.)); +#42338 = DIRECTION('',(1.,0.,0.)); +#42339 = DEFINITIONAL_REPRESENTATION('',(#42340),#42344); +#42340 = LINE('',#42341,#42342); +#42341 = CARTESIAN_POINT('',(0.,0.)); +#42342 = VECTOR('',#42343,1.); +#42343 = DIRECTION('',(1.,0.)); +#42344 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42345 = ORIENTED_EDGE('',*,*,#42346,.F.); +#42346 = EDGE_CURVE('',#42347,#42319,#42349,.T.); +#42347 = VERTEX_POINT('',#42348); +#42348 = CARTESIAN_POINT('',(166.509037,-50.067303,0.)); +#42349 = SURFACE_CURVE('',#42350,(#42354,#42361),.PCURVE_S1.); +#42350 = LINE('',#42351,#42352); +#42351 = CARTESIAN_POINT('',(166.509037,-50.067303,0.)); +#42352 = VECTOR('',#42353,1.); +#42353 = DIRECTION('',(0.996194524659,8.715772507518E-02,0.)); +#42354 = PCURVE('',#40728,#42355); +#42355 = DEFINITIONAL_REPRESENTATION('',(#42356),#42360); +#42356 = LINE('',#42357,#42358); +#42357 = CARTESIAN_POINT('',(-13.86054593298,39.052472313404)); +#42358 = VECTOR('',#42359,1.); +#42359 = DIRECTION('',(-0.996194524659,8.715772507518E-02)); +#42360 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42361 = PCURVE('',#42362,#42367); +#42362 = PLANE('',#42363); +#42363 = AXIS2_PLACEMENT_3D('',#42364,#42365,#42366); +#42364 = CARTESIAN_POINT('',(166.509037,-50.067303,0.)); +#42365 = DIRECTION('',(-8.715772507518E-02,0.996194524659,0.)); +#42366 = DIRECTION('',(0.996194524659,8.715772507518E-02,0.)); +#42367 = DEFINITIONAL_REPRESENTATION('',(#42368),#42372); +#42368 = LINE('',#42369,#42370); +#42369 = CARTESIAN_POINT('',(0.,0.)); +#42370 = VECTOR('',#42371,1.); +#42371 = DIRECTION('',(1.,0.)); +#42372 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42373 = ORIENTED_EDGE('',*,*,#42374,.F.); +#42374 = EDGE_CURVE('',#42375,#42347,#42377,.T.); +#42375 = VERTEX_POINT('',#42376); +#42376 = CARTESIAN_POINT('',(166.281735,-50.128208,0.)); +#42377 = SURFACE_CURVE('',#42378,(#42382,#42389),.PCURVE_S1.); +#42378 = LINE('',#42379,#42380); +#42379 = CARTESIAN_POINT('',(166.281735,-50.128208,0.)); +#42380 = VECTOR('',#42381,1.); +#42381 = DIRECTION('',(0.965926237789,0.25881750936,0.)); +#42382 = PCURVE('',#40728,#42383); +#42383 = DEFINITIONAL_REPRESENTATION('',(#42384),#42388); +#42384 = LINE('',#42385,#42386); +#42385 = CARTESIAN_POINT('',(-13.63324393298,38.991567313404)); +#42386 = VECTOR('',#42387,1.); +#42387 = DIRECTION('',(-0.965926237789,0.25881750936)); +#42388 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42389 = PCURVE('',#42390,#42395); +#42390 = PLANE('',#42391); +#42391 = AXIS2_PLACEMENT_3D('',#42392,#42393,#42394); +#42392 = CARTESIAN_POINT('',(166.281735,-50.128208,0.)); +#42393 = DIRECTION('',(-0.25881750936,0.965926237789,0.)); +#42394 = DIRECTION('',(0.965926237789,0.25881750936,0.)); +#42395 = DEFINITIONAL_REPRESENTATION('',(#42396),#42400); +#42396 = LINE('',#42397,#42398); +#42397 = CARTESIAN_POINT('',(0.,0.)); +#42398 = VECTOR('',#42399,1.); +#42399 = DIRECTION('',(1.,0.)); +#42400 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42401 = ORIENTED_EDGE('',*,*,#42402,.F.); +#42402 = EDGE_CURVE('',#42403,#42375,#42405,.T.); +#42403 = VERTEX_POINT('',#42404); +#42404 = CARTESIAN_POINT('',(166.068462,-50.227659,0.)); +#42405 = SURFACE_CURVE('',#42406,(#42410,#42417),.PCURVE_S1.); +#42406 = LINE('',#42407,#42408); +#42407 = CARTESIAN_POINT('',(166.068462,-50.227659,0.)); +#42408 = VECTOR('',#42409,1.); +#42409 = DIRECTION('',(0.906307515506,0.422618844039,0.)); +#42410 = PCURVE('',#40728,#42411); +#42411 = DEFINITIONAL_REPRESENTATION('',(#42412),#42416); +#42412 = LINE('',#42413,#42414); +#42413 = CARTESIAN_POINT('',(-13.41997093298,38.892116313404)); +#42414 = VECTOR('',#42415,1.); +#42415 = DIRECTION('',(-0.906307515506,0.422618844039)); +#42416 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42417 = PCURVE('',#42418,#42423); +#42418 = PLANE('',#42419); +#42419 = AXIS2_PLACEMENT_3D('',#42420,#42421,#42422); +#42420 = CARTESIAN_POINT('',(166.068462,-50.227659,0.)); +#42421 = DIRECTION('',(-0.422618844039,0.906307515506,0.)); +#42422 = DIRECTION('',(0.906307515506,0.422618844039,0.)); +#42423 = DEFINITIONAL_REPRESENTATION('',(#42424),#42428); +#42424 = LINE('',#42425,#42426); +#42425 = CARTESIAN_POINT('',(0.,0.)); +#42426 = VECTOR('',#42427,1.); +#42427 = DIRECTION('',(1.,0.)); +#42428 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42429 = ORIENTED_EDGE('',*,*,#42430,.F.); +#42430 = EDGE_CURVE('',#42431,#42403,#42433,.T.); +#42431 = VERTEX_POINT('',#42432); +#42432 = CARTESIAN_POINT('',(165.875699,-50.362633,0.)); +#42433 = SURFACE_CURVE('',#42434,(#42438,#42445),.PCURVE_S1.); +#42434 = LINE('',#42435,#42436); +#42435 = CARTESIAN_POINT('',(165.875699,-50.362633,0.)); +#42436 = VECTOR('',#42437,1.); +#42437 = DIRECTION('',(0.819152255308,0.573576134984,0.)); +#42438 = PCURVE('',#40728,#42439); +#42439 = DEFINITIONAL_REPRESENTATION('',(#42440),#42444); +#42440 = LINE('',#42441,#42442); +#42441 = CARTESIAN_POINT('',(-13.22720793298,38.757142313404)); +#42442 = VECTOR('',#42443,1.); +#42443 = DIRECTION('',(-0.819152255308,0.573576134984)); +#42444 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42445 = PCURVE('',#42446,#42451); +#42446 = PLANE('',#42447); +#42447 = AXIS2_PLACEMENT_3D('',#42448,#42449,#42450); +#42448 = CARTESIAN_POINT('',(165.875699,-50.362633,0.)); +#42449 = DIRECTION('',(-0.573576134984,0.819152255308,0.)); +#42450 = DIRECTION('',(0.819152255308,0.573576134984,0.)); +#42451 = DEFINITIONAL_REPRESENTATION('',(#42452),#42456); +#42452 = LINE('',#42453,#42454); +#42453 = CARTESIAN_POINT('',(0.,0.)); +#42454 = VECTOR('',#42455,1.); +#42455 = DIRECTION('',(1.,0.)); +#42456 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42457 = ORIENTED_EDGE('',*,*,#42458,.F.); +#42458 = EDGE_CURVE('',#42459,#42431,#42461,.T.); +#42459 = VERTEX_POINT('',#42460); +#42460 = CARTESIAN_POINT('',(165.709302,-50.52903,0.)); +#42461 = SURFACE_CURVE('',#42462,(#42466,#42473),.PCURVE_S1.); +#42462 = LINE('',#42463,#42464); +#42463 = CARTESIAN_POINT('',(165.709302,-50.52903,0.)); +#42464 = VECTOR('',#42465,1.); +#42465 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#42466 = PCURVE('',#40728,#42467); +#42467 = DEFINITIONAL_REPRESENTATION('',(#42468),#42472); +#42468 = LINE('',#42469,#42470); +#42469 = CARTESIAN_POINT('',(-13.06081093298,38.590745313404)); +#42470 = VECTOR('',#42471,1.); +#42471 = DIRECTION('',(-0.707106781187,0.707106781187)); +#42472 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42473 = PCURVE('',#42474,#42479); +#42474 = PLANE('',#42475); +#42475 = AXIS2_PLACEMENT_3D('',#42476,#42477,#42478); +#42476 = CARTESIAN_POINT('',(165.709302,-50.52903,0.)); +#42477 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#42478 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#42479 = DEFINITIONAL_REPRESENTATION('',(#42480),#42484); +#42480 = LINE('',#42481,#42482); +#42481 = CARTESIAN_POINT('',(0.,0.)); +#42482 = VECTOR('',#42483,1.); +#42483 = DIRECTION('',(1.,0.)); +#42484 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42485 = ORIENTED_EDGE('',*,*,#42486,.F.); +#42486 = EDGE_CURVE('',#42487,#42459,#42489,.T.); +#42487 = VERTEX_POINT('',#42488); +#42488 = CARTESIAN_POINT('',(165.574328,-50.721793,0.)); +#42489 = SURFACE_CURVE('',#42490,(#42494,#42501),.PCURVE_S1.); +#42490 = LINE('',#42491,#42492); +#42491 = CARTESIAN_POINT('',(165.574328,-50.721793,0.)); +#42492 = VECTOR('',#42493,1.); +#42493 = DIRECTION('',(0.573576134984,0.819152255308,0.)); +#42494 = PCURVE('',#40728,#42495); +#42495 = DEFINITIONAL_REPRESENTATION('',(#42496),#42500); +#42496 = LINE('',#42497,#42498); +#42497 = CARTESIAN_POINT('',(-12.92583693298,38.397982313404)); +#42498 = VECTOR('',#42499,1.); +#42499 = DIRECTION('',(-0.573576134984,0.819152255308)); +#42500 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42501 = PCURVE('',#42502,#42507); +#42502 = PLANE('',#42503); +#42503 = AXIS2_PLACEMENT_3D('',#42504,#42505,#42506); +#42504 = CARTESIAN_POINT('',(165.574328,-50.721793,0.)); +#42505 = DIRECTION('',(-0.819152255308,0.573576134984,0.)); +#42506 = DIRECTION('',(0.573576134984,0.819152255308,0.)); +#42507 = DEFINITIONAL_REPRESENTATION('',(#42508),#42512); +#42508 = LINE('',#42509,#42510); +#42509 = CARTESIAN_POINT('',(0.,0.)); +#42510 = VECTOR('',#42511,1.); +#42511 = DIRECTION('',(1.,0.)); +#42512 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42513 = ORIENTED_EDGE('',*,*,#42514,.F.); +#42514 = EDGE_CURVE('',#42515,#42487,#42517,.T.); +#42515 = VERTEX_POINT('',#42516); +#42516 = CARTESIAN_POINT('',(165.474877,-50.935066,0.)); +#42517 = SURFACE_CURVE('',#42518,(#42522,#42529),.PCURVE_S1.); +#42518 = LINE('',#42519,#42520); +#42519 = CARTESIAN_POINT('',(165.474877,-50.935066,0.)); +#42520 = VECTOR('',#42521,1.); +#42521 = DIRECTION('',(0.422618844039,0.906307515506,0.)); +#42522 = PCURVE('',#40728,#42523); +#42523 = DEFINITIONAL_REPRESENTATION('',(#42524),#42528); +#42524 = LINE('',#42525,#42526); +#42525 = CARTESIAN_POINT('',(-12.82638593298,38.184709313404)); +#42526 = VECTOR('',#42527,1.); +#42527 = DIRECTION('',(-0.422618844039,0.906307515506)); +#42528 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42529 = PCURVE('',#42530,#42535); +#42530 = PLANE('',#42531); +#42531 = AXIS2_PLACEMENT_3D('',#42532,#42533,#42534); +#42532 = CARTESIAN_POINT('',(165.474877,-50.935066,0.)); +#42533 = DIRECTION('',(-0.906307515506,0.422618844039,0.)); +#42534 = DIRECTION('',(0.422618844039,0.906307515506,0.)); +#42535 = DEFINITIONAL_REPRESENTATION('',(#42536),#42540); +#42536 = LINE('',#42537,#42538); +#42537 = CARTESIAN_POINT('',(0.,0.)); +#42538 = VECTOR('',#42539,1.); +#42539 = DIRECTION('',(1.,0.)); +#42540 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42541 = ORIENTED_EDGE('',*,*,#42542,.F.); +#42542 = EDGE_CURVE('',#42543,#42515,#42545,.T.); +#42543 = VERTEX_POINT('',#42544); +#42544 = CARTESIAN_POINT('',(165.413972,-51.162368,0.)); +#42545 = SURFACE_CURVE('',#42546,(#42550,#42557),.PCURVE_S1.); +#42546 = LINE('',#42547,#42548); +#42547 = CARTESIAN_POINT('',(165.413972,-51.162368,0.)); +#42548 = VECTOR('',#42549,1.); +#42549 = DIRECTION('',(0.25881750936,0.965926237789,0.)); +#42550 = PCURVE('',#40728,#42551); +#42551 = DEFINITIONAL_REPRESENTATION('',(#42552),#42556); +#42552 = LINE('',#42553,#42554); +#42553 = CARTESIAN_POINT('',(-12.76548093298,37.957407313404)); +#42554 = VECTOR('',#42555,1.); +#42555 = DIRECTION('',(-0.25881750936,0.965926237789)); +#42556 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42557 = PCURVE('',#42558,#42563); +#42558 = PLANE('',#42559); +#42559 = AXIS2_PLACEMENT_3D('',#42560,#42561,#42562); +#42560 = CARTESIAN_POINT('',(165.413972,-51.162368,0.)); +#42561 = DIRECTION('',(-0.965926237789,0.25881750936,0.)); +#42562 = DIRECTION('',(0.25881750936,0.965926237789,0.)); +#42563 = DEFINITIONAL_REPRESENTATION('',(#42564),#42568); +#42564 = LINE('',#42565,#42566); +#42565 = CARTESIAN_POINT('',(0.,0.)); +#42566 = VECTOR('',#42567,1.); +#42567 = DIRECTION('',(1.,0.)); +#42568 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42569 = ORIENTED_EDGE('',*,*,#42570,.F.); +#42570 = EDGE_CURVE('',#42571,#42543,#42573,.T.); +#42571 = VERTEX_POINT('',#42572); +#42572 = CARTESIAN_POINT('',(165.393462,-51.396793,0.)); +#42573 = SURFACE_CURVE('',#42574,(#42578,#42585),.PCURVE_S1.); +#42574 = LINE('',#42575,#42576); +#42575 = CARTESIAN_POINT('',(165.393462,-51.396793,0.)); +#42576 = VECTOR('',#42577,1.); +#42577 = DIRECTION('',(8.715772507518E-02,0.996194524659,0.)); +#42578 = PCURVE('',#40728,#42579); +#42579 = DEFINITIONAL_REPRESENTATION('',(#42580),#42584); +#42580 = LINE('',#42581,#42582); +#42581 = CARTESIAN_POINT('',(-12.74497093298,37.722982313404)); +#42582 = VECTOR('',#42583,1.); +#42583 = DIRECTION('',(-8.715772507518E-02,0.996194524659)); +#42584 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42585 = PCURVE('',#42586,#42591); +#42586 = PLANE('',#42587); +#42587 = AXIS2_PLACEMENT_3D('',#42588,#42589,#42590); +#42588 = CARTESIAN_POINT('',(165.393462,-51.396793,0.)); +#42589 = DIRECTION('',(-0.996194524659,8.715772507518E-02,0.)); +#42590 = DIRECTION('',(8.715772507518E-02,0.996194524659,0.)); +#42591 = DEFINITIONAL_REPRESENTATION('',(#42592),#42596); +#42592 = LINE('',#42593,#42594); +#42593 = CARTESIAN_POINT('',(0.,0.)); +#42594 = VECTOR('',#42595,1.); +#42595 = DIRECTION('',(1.,0.)); +#42596 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42597 = ORIENTED_EDGE('',*,*,#42598,.F.); +#42598 = EDGE_CURVE('',#42599,#42571,#42601,.T.); +#42599 = VERTEX_POINT('',#42600); +#42600 = CARTESIAN_POINT('',(165.413972,-51.631218,0.)); +#42601 = SURFACE_CURVE('',#42602,(#42606,#42613),.PCURVE_S1.); +#42602 = LINE('',#42603,#42604); +#42603 = CARTESIAN_POINT('',(165.413972,-51.631218,0.)); +#42604 = VECTOR('',#42605,1.); +#42605 = DIRECTION('',(-8.715772507518E-02,0.996194524659,0.)); +#42606 = PCURVE('',#40728,#42607); +#42607 = DEFINITIONAL_REPRESENTATION('',(#42608),#42612); +#42608 = LINE('',#42609,#42610); +#42609 = CARTESIAN_POINT('',(-12.76548093298,37.488557313404)); +#42610 = VECTOR('',#42611,1.); +#42611 = DIRECTION('',(8.715772507518E-02,0.996194524659)); +#42612 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42613 = PCURVE('',#42614,#42619); +#42614 = PLANE('',#42615); +#42615 = AXIS2_PLACEMENT_3D('',#42616,#42617,#42618); +#42616 = CARTESIAN_POINT('',(165.413972,-51.631218,0.)); +#42617 = DIRECTION('',(-0.996194524659,-8.715772507518E-02,0.)); +#42618 = DIRECTION('',(-8.715772507518E-02,0.996194524659,0.)); +#42619 = DEFINITIONAL_REPRESENTATION('',(#42620),#42624); +#42620 = LINE('',#42621,#42622); +#42621 = CARTESIAN_POINT('',(0.,0.)); +#42622 = VECTOR('',#42623,1.); +#42623 = DIRECTION('',(1.,0.)); +#42624 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42625 = ORIENTED_EDGE('',*,*,#42626,.F.); +#42626 = EDGE_CURVE('',#42627,#42599,#42629,.T.); +#42627 = VERTEX_POINT('',#42628); +#42628 = CARTESIAN_POINT('',(165.474877,-51.85852,0.)); +#42629 = SURFACE_CURVE('',#42630,(#42634,#42641),.PCURVE_S1.); +#42630 = LINE('',#42631,#42632); +#42631 = CARTESIAN_POINT('',(165.474877,-51.85852,0.)); +#42632 = VECTOR('',#42633,1.); +#42633 = DIRECTION('',(-0.25881750936,0.965926237789,0.)); +#42634 = PCURVE('',#40728,#42635); +#42635 = DEFINITIONAL_REPRESENTATION('',(#42636),#42640); +#42636 = LINE('',#42637,#42638); +#42637 = CARTESIAN_POINT('',(-12.82638593298,37.261255313404)); +#42638 = VECTOR('',#42639,1.); +#42639 = DIRECTION('',(0.25881750936,0.965926237789)); +#42640 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42641 = PCURVE('',#42642,#42647); +#42642 = PLANE('',#42643); +#42643 = AXIS2_PLACEMENT_3D('',#42644,#42645,#42646); +#42644 = CARTESIAN_POINT('',(165.474877,-51.85852,0.)); +#42645 = DIRECTION('',(-0.965926237789,-0.25881750936,0.)); +#42646 = DIRECTION('',(-0.25881750936,0.965926237789,0.)); +#42647 = DEFINITIONAL_REPRESENTATION('',(#42648),#42652); +#42648 = LINE('',#42649,#42650); +#42649 = CARTESIAN_POINT('',(0.,0.)); +#42650 = VECTOR('',#42651,1.); +#42651 = DIRECTION('',(1.,0.)); +#42652 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42653 = ORIENTED_EDGE('',*,*,#42654,.F.); +#42654 = EDGE_CURVE('',#42655,#42627,#42657,.T.); +#42655 = VERTEX_POINT('',#42656); +#42656 = CARTESIAN_POINT('',(165.574328,-52.071793,0.)); +#42657 = SURFACE_CURVE('',#42658,(#42662,#42669),.PCURVE_S1.); +#42658 = LINE('',#42659,#42660); +#42659 = CARTESIAN_POINT('',(165.574328,-52.071793,0.)); +#42660 = VECTOR('',#42661,1.); +#42661 = DIRECTION('',(-0.422618844039,0.906307515506,0.)); +#42662 = PCURVE('',#40728,#42663); +#42663 = DEFINITIONAL_REPRESENTATION('',(#42664),#42668); +#42664 = LINE('',#42665,#42666); +#42665 = CARTESIAN_POINT('',(-12.92583693298,37.047982313404)); +#42666 = VECTOR('',#42667,1.); +#42667 = DIRECTION('',(0.422618844039,0.906307515506)); +#42668 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42669 = PCURVE('',#42670,#42675); +#42670 = PLANE('',#42671); +#42671 = AXIS2_PLACEMENT_3D('',#42672,#42673,#42674); +#42672 = CARTESIAN_POINT('',(165.574328,-52.071793,0.)); +#42673 = DIRECTION('',(-0.906307515506,-0.422618844039,0.)); +#42674 = DIRECTION('',(-0.422618844039,0.906307515506,0.)); +#42675 = DEFINITIONAL_REPRESENTATION('',(#42676),#42680); +#42676 = LINE('',#42677,#42678); +#42677 = CARTESIAN_POINT('',(0.,0.)); +#42678 = VECTOR('',#42679,1.); +#42679 = DIRECTION('',(1.,0.)); +#42680 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42681 = ORIENTED_EDGE('',*,*,#42682,.F.); +#42682 = EDGE_CURVE('',#42683,#42655,#42685,.T.); +#42683 = VERTEX_POINT('',#42684); +#42684 = CARTESIAN_POINT('',(165.709302,-52.264556,0.)); +#42685 = SURFACE_CURVE('',#42686,(#42690,#42697),.PCURVE_S1.); +#42686 = LINE('',#42687,#42688); +#42687 = CARTESIAN_POINT('',(165.709302,-52.264556,0.)); +#42688 = VECTOR('',#42689,1.); +#42689 = DIRECTION('',(-0.573576134984,0.819152255308,0.)); +#42690 = PCURVE('',#40728,#42691); +#42691 = DEFINITIONAL_REPRESENTATION('',(#42692),#42696); +#42692 = LINE('',#42693,#42694); +#42693 = CARTESIAN_POINT('',(-13.06081093298,36.855219313404)); +#42694 = VECTOR('',#42695,1.); +#42695 = DIRECTION('',(0.573576134984,0.819152255308)); +#42696 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42697 = PCURVE('',#42698,#42703); +#42698 = PLANE('',#42699); +#42699 = AXIS2_PLACEMENT_3D('',#42700,#42701,#42702); +#42700 = CARTESIAN_POINT('',(165.709302,-52.264556,0.)); +#42701 = DIRECTION('',(-0.819152255308,-0.573576134984,0.)); +#42702 = DIRECTION('',(-0.573576134984,0.819152255308,0.)); +#42703 = DEFINITIONAL_REPRESENTATION('',(#42704),#42708); +#42704 = LINE('',#42705,#42706); +#42705 = CARTESIAN_POINT('',(0.,0.)); +#42706 = VECTOR('',#42707,1.); +#42707 = DIRECTION('',(1.,0.)); +#42708 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42709 = ORIENTED_EDGE('',*,*,#42710,.F.); +#42710 = EDGE_CURVE('',#42711,#42683,#42713,.T.); +#42711 = VERTEX_POINT('',#42712); +#42712 = CARTESIAN_POINT('',(165.875699,-52.430953,0.)); +#42713 = SURFACE_CURVE('',#42714,(#42718,#42725),.PCURVE_S1.); +#42714 = LINE('',#42715,#42716); +#42715 = CARTESIAN_POINT('',(165.875699,-52.430953,0.)); +#42716 = VECTOR('',#42717,1.); +#42717 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#42718 = PCURVE('',#40728,#42719); +#42719 = DEFINITIONAL_REPRESENTATION('',(#42720),#42724); +#42720 = LINE('',#42721,#42722); +#42721 = CARTESIAN_POINT('',(-13.22720793298,36.688822313404)); +#42722 = VECTOR('',#42723,1.); +#42723 = DIRECTION('',(0.707106781187,0.707106781187)); +#42724 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42725 = PCURVE('',#42726,#42731); +#42726 = PLANE('',#42727); +#42727 = AXIS2_PLACEMENT_3D('',#42728,#42729,#42730); +#42728 = CARTESIAN_POINT('',(165.875699,-52.430953,0.)); +#42729 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#42730 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#42731 = DEFINITIONAL_REPRESENTATION('',(#42732),#42736); +#42732 = LINE('',#42733,#42734); +#42733 = CARTESIAN_POINT('',(0.,0.)); +#42734 = VECTOR('',#42735,1.); +#42735 = DIRECTION('',(1.,0.)); +#42736 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42737 = ORIENTED_EDGE('',*,*,#42738,.F.); +#42738 = EDGE_CURVE('',#42739,#42711,#42741,.T.); +#42739 = VERTEX_POINT('',#42740); +#42740 = CARTESIAN_POINT('',(166.068462,-52.565927,0.)); +#42741 = SURFACE_CURVE('',#42742,(#42746,#42753),.PCURVE_S1.); +#42742 = LINE('',#42743,#42744); +#42743 = CARTESIAN_POINT('',(166.068462,-52.565927,0.)); +#42744 = VECTOR('',#42745,1.); +#42745 = DIRECTION('',(-0.819152255308,0.573576134984,0.)); +#42746 = PCURVE('',#40728,#42747); +#42747 = DEFINITIONAL_REPRESENTATION('',(#42748),#42752); +#42748 = LINE('',#42749,#42750); +#42749 = CARTESIAN_POINT('',(-13.41997093298,36.553848313404)); +#42750 = VECTOR('',#42751,1.); +#42751 = DIRECTION('',(0.819152255308,0.573576134984)); +#42752 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42753 = PCURVE('',#42754,#42759); +#42754 = PLANE('',#42755); +#42755 = AXIS2_PLACEMENT_3D('',#42756,#42757,#42758); +#42756 = CARTESIAN_POINT('',(166.068462,-52.565927,0.)); +#42757 = DIRECTION('',(-0.573576134984,-0.819152255308,0.)); +#42758 = DIRECTION('',(-0.819152255308,0.573576134984,0.)); +#42759 = DEFINITIONAL_REPRESENTATION('',(#42760),#42764); +#42760 = LINE('',#42761,#42762); +#42761 = CARTESIAN_POINT('',(0.,0.)); +#42762 = VECTOR('',#42763,1.); +#42763 = DIRECTION('',(1.,0.)); +#42764 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42765 = ORIENTED_EDGE('',*,*,#42766,.F.); +#42766 = EDGE_CURVE('',#42767,#42739,#42769,.T.); +#42767 = VERTEX_POINT('',#42768); +#42768 = CARTESIAN_POINT('',(166.281735,-52.665378,0.)); +#42769 = SURFACE_CURVE('',#42770,(#42774,#42781),.PCURVE_S1.); +#42770 = LINE('',#42771,#42772); +#42771 = CARTESIAN_POINT('',(166.281735,-52.665378,0.)); +#42772 = VECTOR('',#42773,1.); +#42773 = DIRECTION('',(-0.906307515506,0.422618844039,0.)); +#42774 = PCURVE('',#40728,#42775); +#42775 = DEFINITIONAL_REPRESENTATION('',(#42776),#42780); +#42776 = LINE('',#42777,#42778); +#42777 = CARTESIAN_POINT('',(-13.63324393298,36.454397313404)); +#42778 = VECTOR('',#42779,1.); +#42779 = DIRECTION('',(0.906307515506,0.422618844039)); +#42780 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42781 = PCURVE('',#42782,#42787); +#42782 = PLANE('',#42783); +#42783 = AXIS2_PLACEMENT_3D('',#42784,#42785,#42786); +#42784 = CARTESIAN_POINT('',(166.281735,-52.665378,0.)); +#42785 = DIRECTION('',(-0.422618844039,-0.906307515506,0.)); +#42786 = DIRECTION('',(-0.906307515506,0.422618844039,0.)); +#42787 = DEFINITIONAL_REPRESENTATION('',(#42788),#42792); +#42788 = LINE('',#42789,#42790); +#42789 = CARTESIAN_POINT('',(0.,0.)); +#42790 = VECTOR('',#42791,1.); +#42791 = DIRECTION('',(1.,0.)); +#42792 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42793 = ORIENTED_EDGE('',*,*,#42794,.F.); +#42794 = EDGE_CURVE('',#42795,#42767,#42797,.T.); +#42795 = VERTEX_POINT('',#42796); +#42796 = CARTESIAN_POINT('',(166.509037,-52.726283,0.)); +#42797 = SURFACE_CURVE('',#42798,(#42802,#42809),.PCURVE_S1.); +#42798 = LINE('',#42799,#42800); +#42799 = CARTESIAN_POINT('',(166.509037,-52.726283,0.)); +#42800 = VECTOR('',#42801,1.); +#42801 = DIRECTION('',(-0.965926237789,0.25881750936,0.)); +#42802 = PCURVE('',#40728,#42803); +#42803 = DEFINITIONAL_REPRESENTATION('',(#42804),#42808); +#42804 = LINE('',#42805,#42806); +#42805 = CARTESIAN_POINT('',(-13.86054593298,36.393492313404)); +#42806 = VECTOR('',#42807,1.); +#42807 = DIRECTION('',(0.965926237789,0.25881750936)); +#42808 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42809 = PCURVE('',#42810,#42815); +#42810 = PLANE('',#42811); +#42811 = AXIS2_PLACEMENT_3D('',#42812,#42813,#42814); +#42812 = CARTESIAN_POINT('',(166.509037,-52.726283,0.)); +#42813 = DIRECTION('',(-0.25881750936,-0.965926237789,0.)); +#42814 = DIRECTION('',(-0.965926237789,0.25881750936,0.)); +#42815 = DEFINITIONAL_REPRESENTATION('',(#42816),#42820); +#42816 = LINE('',#42817,#42818); +#42817 = CARTESIAN_POINT('',(0.,0.)); +#42818 = VECTOR('',#42819,1.); +#42819 = DIRECTION('',(1.,0.)); +#42820 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42821 = ORIENTED_EDGE('',*,*,#42822,.F.); +#42822 = EDGE_CURVE('',#42823,#42795,#42825,.T.); +#42823 = VERTEX_POINT('',#42824); +#42824 = CARTESIAN_POINT('',(166.743462,-52.746793,0.)); +#42825 = SURFACE_CURVE('',#42826,(#42830,#42837),.PCURVE_S1.); +#42826 = LINE('',#42827,#42828); +#42827 = CARTESIAN_POINT('',(166.743462,-52.746793,0.)); +#42828 = VECTOR('',#42829,1.); +#42829 = DIRECTION('',(-0.996194524659,8.715772507515E-02,0.)); +#42830 = PCURVE('',#40728,#42831); +#42831 = DEFINITIONAL_REPRESENTATION('',(#42832),#42836); +#42832 = LINE('',#42833,#42834); +#42833 = CARTESIAN_POINT('',(-14.09497093298,36.372982313404)); +#42834 = VECTOR('',#42835,1.); +#42835 = DIRECTION('',(0.996194524659,8.715772507515E-02)); +#42836 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42837 = PCURVE('',#42838,#42843); +#42838 = PLANE('',#42839); +#42839 = AXIS2_PLACEMENT_3D('',#42840,#42841,#42842); +#42840 = CARTESIAN_POINT('',(166.743462,-52.746793,0.)); +#42841 = DIRECTION('',(-8.715772507515E-02,-0.996194524659,0.)); +#42842 = DIRECTION('',(-0.996194524659,8.715772507515E-02,0.)); +#42843 = DEFINITIONAL_REPRESENTATION('',(#42844),#42848); +#42844 = LINE('',#42845,#42846); +#42845 = CARTESIAN_POINT('',(0.,0.)); +#42846 = VECTOR('',#42847,1.); +#42847 = DIRECTION('',(1.,0.)); +#42848 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42849 = ORIENTED_EDGE('',*,*,#42850,.F.); +#42850 = EDGE_CURVE('',#42851,#42823,#42853,.T.); +#42851 = VERTEX_POINT('',#42852); +#42852 = CARTESIAN_POINT('',(167.543462,-52.746793,0.)); +#42853 = SURFACE_CURVE('',#42854,(#42858,#42865),.PCURVE_S1.); +#42854 = LINE('',#42855,#42856); +#42855 = CARTESIAN_POINT('',(167.543462,-52.746793,0.)); +#42856 = VECTOR('',#42857,1.); +#42857 = DIRECTION('',(-1.,0.,0.)); +#42858 = PCURVE('',#40728,#42859); +#42859 = DEFINITIONAL_REPRESENTATION('',(#42860),#42864); +#42860 = LINE('',#42861,#42862); +#42861 = CARTESIAN_POINT('',(-14.89497093298,36.372982313404)); +#42862 = VECTOR('',#42863,1.); +#42863 = DIRECTION('',(1.,0.)); +#42864 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42865 = PCURVE('',#42866,#42871); +#42866 = PLANE('',#42867); +#42867 = AXIS2_PLACEMENT_3D('',#42868,#42869,#42870); +#42868 = CARTESIAN_POINT('',(167.543462,-52.746793,0.)); +#42869 = DIRECTION('',(0.,-1.,0.)); +#42870 = DIRECTION('',(-1.,0.,0.)); +#42871 = DEFINITIONAL_REPRESENTATION('',(#42872),#42876); +#42872 = LINE('',#42873,#42874); +#42873 = CARTESIAN_POINT('',(0.,-0.)); +#42874 = VECTOR('',#42875,1.); +#42875 = DIRECTION('',(1.,0.)); +#42876 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42877 = ORIENTED_EDGE('',*,*,#42878,.F.); +#42878 = EDGE_CURVE('',#42879,#42851,#42881,.T.); +#42879 = VERTEX_POINT('',#42880); +#42880 = CARTESIAN_POINT('',(167.777887,-52.726283,0.)); +#42881 = SURFACE_CURVE('',#42882,(#42886,#42893),.PCURVE_S1.); +#42882 = LINE('',#42883,#42884); +#42883 = CARTESIAN_POINT('',(167.777887,-52.726283,0.)); +#42884 = VECTOR('',#42885,1.); +#42885 = DIRECTION('',(-0.996194524659,-8.715772507515E-02,0.)); +#42886 = PCURVE('',#40728,#42887); +#42887 = DEFINITIONAL_REPRESENTATION('',(#42888),#42892); +#42888 = LINE('',#42889,#42890); +#42889 = CARTESIAN_POINT('',(-15.12939593298,36.393492313404)); +#42890 = VECTOR('',#42891,1.); +#42891 = DIRECTION('',(0.996194524659,-8.715772507515E-02)); +#42892 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42893 = PCURVE('',#42894,#42899); +#42894 = PLANE('',#42895); +#42895 = AXIS2_PLACEMENT_3D('',#42896,#42897,#42898); +#42896 = CARTESIAN_POINT('',(167.777887,-52.726283,0.)); +#42897 = DIRECTION('',(8.715772507515E-02,-0.996194524659,0.)); +#42898 = DIRECTION('',(-0.996194524659,-8.715772507515E-02,0.)); +#42899 = DEFINITIONAL_REPRESENTATION('',(#42900),#42904); +#42900 = LINE('',#42901,#42902); +#42901 = CARTESIAN_POINT('',(0.,0.)); +#42902 = VECTOR('',#42903,1.); +#42903 = DIRECTION('',(1.,0.)); +#42904 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42905 = ORIENTED_EDGE('',*,*,#42906,.F.); +#42906 = EDGE_CURVE('',#42907,#42879,#42909,.T.); +#42907 = VERTEX_POINT('',#42908); +#42908 = CARTESIAN_POINT('',(168.005189,-52.665378,0.)); +#42909 = SURFACE_CURVE('',#42910,(#42914,#42921),.PCURVE_S1.); +#42910 = LINE('',#42911,#42912); +#42911 = CARTESIAN_POINT('',(168.005189,-52.665378,0.)); +#42912 = VECTOR('',#42913,1.); +#42913 = DIRECTION('',(-0.965926237789,-0.25881750936,0.)); +#42914 = PCURVE('',#40728,#42915); +#42915 = DEFINITIONAL_REPRESENTATION('',(#42916),#42920); +#42916 = LINE('',#42917,#42918); +#42917 = CARTESIAN_POINT('',(-15.35669793298,36.454397313404)); +#42918 = VECTOR('',#42919,1.); +#42919 = DIRECTION('',(0.965926237789,-0.25881750936)); +#42920 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42921 = PCURVE('',#42922,#42927); +#42922 = PLANE('',#42923); +#42923 = AXIS2_PLACEMENT_3D('',#42924,#42925,#42926); +#42924 = CARTESIAN_POINT('',(168.005189,-52.665378,0.)); +#42925 = DIRECTION('',(0.25881750936,-0.965926237789,0.)); +#42926 = DIRECTION('',(-0.965926237789,-0.25881750936,0.)); +#42927 = DEFINITIONAL_REPRESENTATION('',(#42928),#42932); +#42928 = LINE('',#42929,#42930); +#42929 = CARTESIAN_POINT('',(0.,0.)); +#42930 = VECTOR('',#42931,1.); +#42931 = DIRECTION('',(1.,0.)); +#42932 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42933 = ORIENTED_EDGE('',*,*,#42934,.F.); +#42934 = EDGE_CURVE('',#42935,#42907,#42937,.T.); +#42935 = VERTEX_POINT('',#42936); +#42936 = CARTESIAN_POINT('',(168.218462,-52.565927,0.)); +#42937 = SURFACE_CURVE('',#42938,(#42942,#42949),.PCURVE_S1.); +#42938 = LINE('',#42939,#42940); +#42939 = CARTESIAN_POINT('',(168.218462,-52.565927,0.)); +#42940 = VECTOR('',#42941,1.); +#42941 = DIRECTION('',(-0.906307515506,-0.422618844039,0.)); +#42942 = PCURVE('',#40728,#42943); +#42943 = DEFINITIONAL_REPRESENTATION('',(#42944),#42948); +#42944 = LINE('',#42945,#42946); +#42945 = CARTESIAN_POINT('',(-15.56997093298,36.553848313404)); +#42946 = VECTOR('',#42947,1.); +#42947 = DIRECTION('',(0.906307515506,-0.422618844039)); +#42948 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42949 = PCURVE('',#42950,#42955); +#42950 = PLANE('',#42951); +#42951 = AXIS2_PLACEMENT_3D('',#42952,#42953,#42954); +#42952 = CARTESIAN_POINT('',(168.218462,-52.565927,0.)); +#42953 = DIRECTION('',(0.422618844039,-0.906307515506,0.)); +#42954 = DIRECTION('',(-0.906307515506,-0.422618844039,0.)); +#42955 = DEFINITIONAL_REPRESENTATION('',(#42956),#42960); +#42956 = LINE('',#42957,#42958); +#42957 = CARTESIAN_POINT('',(0.,0.)); +#42958 = VECTOR('',#42959,1.); +#42959 = DIRECTION('',(1.,0.)); +#42960 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42961 = ORIENTED_EDGE('',*,*,#42962,.F.); +#42962 = EDGE_CURVE('',#42963,#42935,#42965,.T.); +#42963 = VERTEX_POINT('',#42964); +#42964 = CARTESIAN_POINT('',(168.411225,-52.430953,0.)); +#42965 = SURFACE_CURVE('',#42966,(#42970,#42977),.PCURVE_S1.); +#42966 = LINE('',#42967,#42968); +#42967 = CARTESIAN_POINT('',(168.411225,-52.430953,0.)); +#42968 = VECTOR('',#42969,1.); +#42969 = DIRECTION('',(-0.819152255308,-0.573576134984,0.)); +#42970 = PCURVE('',#40728,#42971); +#42971 = DEFINITIONAL_REPRESENTATION('',(#42972),#42976); +#42972 = LINE('',#42973,#42974); +#42973 = CARTESIAN_POINT('',(-15.76273393298,36.688822313404)); +#42974 = VECTOR('',#42975,1.); +#42975 = DIRECTION('',(0.819152255308,-0.573576134984)); +#42976 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42977 = PCURVE('',#42978,#42983); +#42978 = PLANE('',#42979); +#42979 = AXIS2_PLACEMENT_3D('',#42980,#42981,#42982); +#42980 = CARTESIAN_POINT('',(168.411225,-52.430953,0.)); +#42981 = DIRECTION('',(0.573576134984,-0.819152255308,0.)); +#42982 = DIRECTION('',(-0.819152255308,-0.573576134984,0.)); +#42983 = DEFINITIONAL_REPRESENTATION('',(#42984),#42988); +#42984 = LINE('',#42985,#42986); +#42985 = CARTESIAN_POINT('',(0.,0.)); +#42986 = VECTOR('',#42987,1.); +#42987 = DIRECTION('',(1.,0.)); +#42988 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#42989 = ORIENTED_EDGE('',*,*,#42990,.F.); +#42990 = EDGE_CURVE('',#42991,#42963,#42993,.T.); +#42991 = VERTEX_POINT('',#42992); +#42992 = CARTESIAN_POINT('',(168.577622,-52.264556,0.)); +#42993 = SURFACE_CURVE('',#42994,(#42998,#43005),.PCURVE_S1.); +#42994 = LINE('',#42995,#42996); +#42995 = CARTESIAN_POINT('',(168.577622,-52.264556,0.)); +#42996 = VECTOR('',#42997,1.); +#42997 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#42998 = PCURVE('',#40728,#42999); +#42999 = DEFINITIONAL_REPRESENTATION('',(#43000),#43004); +#43000 = LINE('',#43001,#43002); +#43001 = CARTESIAN_POINT('',(-15.92913093298,36.855219313404)); +#43002 = VECTOR('',#43003,1.); +#43003 = DIRECTION('',(0.707106781187,-0.707106781187)); +#43004 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43005 = PCURVE('',#43006,#43011); +#43006 = PLANE('',#43007); +#43007 = AXIS2_PLACEMENT_3D('',#43008,#43009,#43010); +#43008 = CARTESIAN_POINT('',(168.577622,-52.264556,0.)); +#43009 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#43010 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#43011 = DEFINITIONAL_REPRESENTATION('',(#43012),#43016); +#43012 = LINE('',#43013,#43014); +#43013 = CARTESIAN_POINT('',(0.,0.)); +#43014 = VECTOR('',#43015,1.); +#43015 = DIRECTION('',(1.,0.)); +#43016 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43017 = ORIENTED_EDGE('',*,*,#43018,.F.); +#43018 = EDGE_CURVE('',#43019,#42991,#43021,.T.); +#43019 = VERTEX_POINT('',#43020); +#43020 = CARTESIAN_POINT('',(168.712596,-52.071793,0.)); +#43021 = SURFACE_CURVE('',#43022,(#43026,#43033),.PCURVE_S1.); +#43022 = LINE('',#43023,#43024); +#43023 = CARTESIAN_POINT('',(168.712596,-52.071793,0.)); +#43024 = VECTOR('',#43025,1.); +#43025 = DIRECTION('',(-0.573576134984,-0.819152255308,0.)); +#43026 = PCURVE('',#40728,#43027); +#43027 = DEFINITIONAL_REPRESENTATION('',(#43028),#43032); +#43028 = LINE('',#43029,#43030); +#43029 = CARTESIAN_POINT('',(-16.06410493298,37.047982313404)); +#43030 = VECTOR('',#43031,1.); +#43031 = DIRECTION('',(0.573576134984,-0.819152255308)); +#43032 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43033 = PCURVE('',#43034,#43039); +#43034 = PLANE('',#43035); +#43035 = AXIS2_PLACEMENT_3D('',#43036,#43037,#43038); +#43036 = CARTESIAN_POINT('',(168.712596,-52.071793,0.)); +#43037 = DIRECTION('',(0.819152255308,-0.573576134984,0.)); +#43038 = DIRECTION('',(-0.573576134984,-0.819152255308,0.)); +#43039 = DEFINITIONAL_REPRESENTATION('',(#43040),#43044); +#43040 = LINE('',#43041,#43042); +#43041 = CARTESIAN_POINT('',(0.,0.)); +#43042 = VECTOR('',#43043,1.); +#43043 = DIRECTION('',(1.,0.)); +#43044 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43045 = ORIENTED_EDGE('',*,*,#43046,.F.); +#43046 = EDGE_CURVE('',#43047,#43019,#43049,.T.); +#43047 = VERTEX_POINT('',#43048); +#43048 = CARTESIAN_POINT('',(168.812047,-51.85852,0.)); +#43049 = SURFACE_CURVE('',#43050,(#43054,#43061),.PCURVE_S1.); +#43050 = LINE('',#43051,#43052); +#43051 = CARTESIAN_POINT('',(168.812047,-51.85852,0.)); +#43052 = VECTOR('',#43053,1.); +#43053 = DIRECTION('',(-0.422618844039,-0.906307515506,0.)); +#43054 = PCURVE('',#40728,#43055); +#43055 = DEFINITIONAL_REPRESENTATION('',(#43056),#43060); +#43056 = LINE('',#43057,#43058); +#43057 = CARTESIAN_POINT('',(-16.16355593298,37.261255313404)); +#43058 = VECTOR('',#43059,1.); +#43059 = DIRECTION('',(0.422618844039,-0.906307515506)); +#43060 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43061 = PCURVE('',#43062,#43067); +#43062 = PLANE('',#43063); +#43063 = AXIS2_PLACEMENT_3D('',#43064,#43065,#43066); +#43064 = CARTESIAN_POINT('',(168.812047,-51.85852,0.)); +#43065 = DIRECTION('',(0.906307515506,-0.422618844039,0.)); +#43066 = DIRECTION('',(-0.422618844039,-0.906307515506,0.)); +#43067 = DEFINITIONAL_REPRESENTATION('',(#43068),#43072); +#43068 = LINE('',#43069,#43070); +#43069 = CARTESIAN_POINT('',(0.,0.)); +#43070 = VECTOR('',#43071,1.); +#43071 = DIRECTION('',(1.,0.)); +#43072 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43073 = ORIENTED_EDGE('',*,*,#43074,.F.); +#43074 = EDGE_CURVE('',#43075,#43047,#43077,.T.); +#43075 = VERTEX_POINT('',#43076); +#43076 = CARTESIAN_POINT('',(168.872952,-51.631218,0.)); +#43077 = SURFACE_CURVE('',#43078,(#43082,#43089),.PCURVE_S1.); +#43078 = LINE('',#43079,#43080); +#43079 = CARTESIAN_POINT('',(168.872952,-51.631218,0.)); +#43080 = VECTOR('',#43081,1.); +#43081 = DIRECTION('',(-0.25881750936,-0.965926237789,0.)); +#43082 = PCURVE('',#40728,#43083); +#43083 = DEFINITIONAL_REPRESENTATION('',(#43084),#43088); +#43084 = LINE('',#43085,#43086); +#43085 = CARTESIAN_POINT('',(-16.22446093298,37.488557313404)); +#43086 = VECTOR('',#43087,1.); +#43087 = DIRECTION('',(0.25881750936,-0.965926237789)); +#43088 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43089 = PCURVE('',#43090,#43095); +#43090 = PLANE('',#43091); +#43091 = AXIS2_PLACEMENT_3D('',#43092,#43093,#43094); +#43092 = CARTESIAN_POINT('',(168.872952,-51.631218,0.)); +#43093 = DIRECTION('',(0.965926237789,-0.25881750936,0.)); +#43094 = DIRECTION('',(-0.25881750936,-0.965926237789,0.)); +#43095 = DEFINITIONAL_REPRESENTATION('',(#43096),#43100); +#43096 = LINE('',#43097,#43098); +#43097 = CARTESIAN_POINT('',(0.,0.)); +#43098 = VECTOR('',#43099,1.); +#43099 = DIRECTION('',(1.,0.)); +#43100 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43101 = ORIENTED_EDGE('',*,*,#43102,.F.); +#43102 = EDGE_CURVE('',#43103,#43075,#43105,.T.); +#43103 = VERTEX_POINT('',#43104); +#43104 = CARTESIAN_POINT('',(168.893462,-51.396793,0.)); +#43105 = SURFACE_CURVE('',#43106,(#43110,#43117),.PCURVE_S1.); +#43106 = LINE('',#43107,#43108); +#43107 = CARTESIAN_POINT('',(168.893462,-51.396793,0.)); +#43108 = VECTOR('',#43109,1.); +#43109 = DIRECTION('',(-8.715772507518E-02,-0.996194524659,0.)); +#43110 = PCURVE('',#40728,#43111); +#43111 = DEFINITIONAL_REPRESENTATION('',(#43112),#43116); +#43112 = LINE('',#43113,#43114); +#43113 = CARTESIAN_POINT('',(-16.24497093298,37.722982313404)); +#43114 = VECTOR('',#43115,1.); +#43115 = DIRECTION('',(8.715772507518E-02,-0.996194524659)); +#43116 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43117 = PCURVE('',#43118,#43123); +#43118 = PLANE('',#43119); +#43119 = AXIS2_PLACEMENT_3D('',#43120,#43121,#43122); +#43120 = CARTESIAN_POINT('',(168.893462,-51.396793,0.)); +#43121 = DIRECTION('',(0.996194524659,-8.715772507518E-02,0.)); +#43122 = DIRECTION('',(-8.715772507518E-02,-0.996194524659,0.)); +#43123 = DEFINITIONAL_REPRESENTATION('',(#43124),#43128); +#43124 = LINE('',#43125,#43126); +#43125 = CARTESIAN_POINT('',(0.,0.)); +#43126 = VECTOR('',#43127,1.); +#43127 = DIRECTION('',(1.,0.)); +#43128 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43129 = ORIENTED_EDGE('',*,*,#43130,.F.); +#43130 = EDGE_CURVE('',#43131,#43103,#43133,.T.); +#43131 = VERTEX_POINT('',#43132); +#43132 = CARTESIAN_POINT('',(168.872952,-51.162368,0.)); +#43133 = SURFACE_CURVE('',#43134,(#43138,#43145),.PCURVE_S1.); +#43134 = LINE('',#43135,#43136); +#43135 = CARTESIAN_POINT('',(168.872952,-51.162368,0.)); +#43136 = VECTOR('',#43137,1.); +#43137 = DIRECTION('',(8.715772507518E-02,-0.996194524659,0.)); +#43138 = PCURVE('',#40728,#43139); +#43139 = DEFINITIONAL_REPRESENTATION('',(#43140),#43144); +#43140 = LINE('',#43141,#43142); +#43141 = CARTESIAN_POINT('',(-16.22446093298,37.957407313404)); +#43142 = VECTOR('',#43143,1.); +#43143 = DIRECTION('',(-8.715772507518E-02,-0.996194524659)); +#43144 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43145 = PCURVE('',#43146,#43151); +#43146 = PLANE('',#43147); +#43147 = AXIS2_PLACEMENT_3D('',#43148,#43149,#43150); +#43148 = CARTESIAN_POINT('',(168.872952,-51.162368,0.)); +#43149 = DIRECTION('',(0.996194524659,8.715772507518E-02,-0.)); +#43150 = DIRECTION('',(8.715772507518E-02,-0.996194524659,0.)); +#43151 = DEFINITIONAL_REPRESENTATION('',(#43152),#43156); +#43152 = LINE('',#43153,#43154); +#43153 = CARTESIAN_POINT('',(0.,0.)); +#43154 = VECTOR('',#43155,1.); +#43155 = DIRECTION('',(1.,0.)); +#43156 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43157 = ORIENTED_EDGE('',*,*,#43158,.F.); +#43158 = EDGE_CURVE('',#43159,#43131,#43161,.T.); +#43159 = VERTEX_POINT('',#43160); +#43160 = CARTESIAN_POINT('',(168.812047,-50.935066,0.)); +#43161 = SURFACE_CURVE('',#43162,(#43166,#43173),.PCURVE_S1.); +#43162 = LINE('',#43163,#43164); +#43163 = CARTESIAN_POINT('',(168.812047,-50.935066,0.)); +#43164 = VECTOR('',#43165,1.); +#43165 = DIRECTION('',(0.25881750936,-0.965926237789,0.)); +#43166 = PCURVE('',#40728,#43167); +#43167 = DEFINITIONAL_REPRESENTATION('',(#43168),#43172); +#43168 = LINE('',#43169,#43170); +#43169 = CARTESIAN_POINT('',(-16.16355593298,38.184709313404)); +#43170 = VECTOR('',#43171,1.); +#43171 = DIRECTION('',(-0.25881750936,-0.965926237789)); +#43172 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43173 = PCURVE('',#43174,#43179); +#43174 = PLANE('',#43175); +#43175 = AXIS2_PLACEMENT_3D('',#43176,#43177,#43178); +#43176 = CARTESIAN_POINT('',(168.812047,-50.935066,0.)); +#43177 = DIRECTION('',(0.965926237789,0.25881750936,-0.)); +#43178 = DIRECTION('',(0.25881750936,-0.965926237789,0.)); +#43179 = DEFINITIONAL_REPRESENTATION('',(#43180),#43184); +#43180 = LINE('',#43181,#43182); +#43181 = CARTESIAN_POINT('',(0.,0.)); +#43182 = VECTOR('',#43183,1.); +#43183 = DIRECTION('',(1.,0.)); +#43184 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43185 = ORIENTED_EDGE('',*,*,#43186,.F.); +#43186 = EDGE_CURVE('',#43187,#43159,#43189,.T.); +#43187 = VERTEX_POINT('',#43188); +#43188 = CARTESIAN_POINT('',(168.712596,-50.721793,0.)); +#43189 = SURFACE_CURVE('',#43190,(#43194,#43201),.PCURVE_S1.); +#43190 = LINE('',#43191,#43192); +#43191 = CARTESIAN_POINT('',(168.712596,-50.721793,0.)); +#43192 = VECTOR('',#43193,1.); +#43193 = DIRECTION('',(0.422618844039,-0.906307515506,0.)); +#43194 = PCURVE('',#40728,#43195); +#43195 = DEFINITIONAL_REPRESENTATION('',(#43196),#43200); +#43196 = LINE('',#43197,#43198); +#43197 = CARTESIAN_POINT('',(-16.06410493298,38.397982313404)); +#43198 = VECTOR('',#43199,1.); +#43199 = DIRECTION('',(-0.422618844039,-0.906307515506)); +#43200 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43201 = PCURVE('',#43202,#43207); +#43202 = PLANE('',#43203); +#43203 = AXIS2_PLACEMENT_3D('',#43204,#43205,#43206); +#43204 = CARTESIAN_POINT('',(168.712596,-50.721793,0.)); +#43205 = DIRECTION('',(0.906307515506,0.422618844039,-0.)); +#43206 = DIRECTION('',(0.422618844039,-0.906307515506,0.)); +#43207 = DEFINITIONAL_REPRESENTATION('',(#43208),#43212); +#43208 = LINE('',#43209,#43210); +#43209 = CARTESIAN_POINT('',(0.,0.)); +#43210 = VECTOR('',#43211,1.); +#43211 = DIRECTION('',(1.,0.)); +#43212 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43213 = ORIENTED_EDGE('',*,*,#43214,.F.); +#43214 = EDGE_CURVE('',#43215,#43187,#43217,.T.); +#43215 = VERTEX_POINT('',#43216); +#43216 = CARTESIAN_POINT('',(168.577622,-50.52903,0.)); +#43217 = SURFACE_CURVE('',#43218,(#43222,#43229),.PCURVE_S1.); +#43218 = LINE('',#43219,#43220); +#43219 = CARTESIAN_POINT('',(168.577622,-50.52903,0.)); +#43220 = VECTOR('',#43221,1.); +#43221 = DIRECTION('',(0.573576134984,-0.819152255308,0.)); +#43222 = PCURVE('',#40728,#43223); +#43223 = DEFINITIONAL_REPRESENTATION('',(#43224),#43228); +#43224 = LINE('',#43225,#43226); +#43225 = CARTESIAN_POINT('',(-15.92913093298,38.590745313404)); +#43226 = VECTOR('',#43227,1.); +#43227 = DIRECTION('',(-0.573576134984,-0.819152255308)); +#43228 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43229 = PCURVE('',#43230,#43235); +#43230 = PLANE('',#43231); +#43231 = AXIS2_PLACEMENT_3D('',#43232,#43233,#43234); +#43232 = CARTESIAN_POINT('',(168.577622,-50.52903,0.)); +#43233 = DIRECTION('',(0.819152255308,0.573576134984,-0.)); +#43234 = DIRECTION('',(0.573576134984,-0.819152255308,0.)); +#43235 = DEFINITIONAL_REPRESENTATION('',(#43236),#43240); +#43236 = LINE('',#43237,#43238); +#43237 = CARTESIAN_POINT('',(0.,0.)); +#43238 = VECTOR('',#43239,1.); +#43239 = DIRECTION('',(1.,0.)); +#43240 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43241 = ORIENTED_EDGE('',*,*,#43242,.F.); +#43242 = EDGE_CURVE('',#43243,#43215,#43245,.T.); +#43243 = VERTEX_POINT('',#43244); +#43244 = CARTESIAN_POINT('',(168.411225,-50.362633,0.)); +#43245 = SURFACE_CURVE('',#43246,(#43250,#43257),.PCURVE_S1.); +#43246 = LINE('',#43247,#43248); +#43247 = CARTESIAN_POINT('',(168.411225,-50.362633,0.)); +#43248 = VECTOR('',#43249,1.); +#43249 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#43250 = PCURVE('',#40728,#43251); +#43251 = DEFINITIONAL_REPRESENTATION('',(#43252),#43256); +#43252 = LINE('',#43253,#43254); +#43253 = CARTESIAN_POINT('',(-15.76273393298,38.757142313404)); +#43254 = VECTOR('',#43255,1.); +#43255 = DIRECTION('',(-0.707106781187,-0.707106781187)); +#43256 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43257 = PCURVE('',#43258,#43263); +#43258 = PLANE('',#43259); +#43259 = AXIS2_PLACEMENT_3D('',#43260,#43261,#43262); +#43260 = CARTESIAN_POINT('',(168.411225,-50.362633,0.)); +#43261 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#43262 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#43263 = DEFINITIONAL_REPRESENTATION('',(#43264),#43268); +#43264 = LINE('',#43265,#43266); +#43265 = CARTESIAN_POINT('',(0.,0.)); +#43266 = VECTOR('',#43267,1.); +#43267 = DIRECTION('',(1.,0.)); +#43268 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43269 = ORIENTED_EDGE('',*,*,#43270,.F.); +#43270 = EDGE_CURVE('',#43271,#43243,#43273,.T.); +#43271 = VERTEX_POINT('',#43272); +#43272 = CARTESIAN_POINT('',(168.218462,-50.227659,0.)); +#43273 = SURFACE_CURVE('',#43274,(#43278,#43285),.PCURVE_S1.); +#43274 = LINE('',#43275,#43276); +#43275 = CARTESIAN_POINT('',(168.218462,-50.227659,0.)); +#43276 = VECTOR('',#43277,1.); +#43277 = DIRECTION('',(0.819152255308,-0.573576134984,0.)); +#43278 = PCURVE('',#40728,#43279); +#43279 = DEFINITIONAL_REPRESENTATION('',(#43280),#43284); +#43280 = LINE('',#43281,#43282); +#43281 = CARTESIAN_POINT('',(-15.56997093298,38.892116313404)); +#43282 = VECTOR('',#43283,1.); +#43283 = DIRECTION('',(-0.819152255308,-0.573576134984)); +#43284 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43285 = PCURVE('',#43286,#43291); +#43286 = PLANE('',#43287); +#43287 = AXIS2_PLACEMENT_3D('',#43288,#43289,#43290); +#43288 = CARTESIAN_POINT('',(168.218462,-50.227659,0.)); +#43289 = DIRECTION('',(0.573576134984,0.819152255308,-0.)); +#43290 = DIRECTION('',(0.819152255308,-0.573576134984,0.)); +#43291 = DEFINITIONAL_REPRESENTATION('',(#43292),#43296); +#43292 = LINE('',#43293,#43294); +#43293 = CARTESIAN_POINT('',(0.,0.)); +#43294 = VECTOR('',#43295,1.); +#43295 = DIRECTION('',(1.,0.)); +#43296 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43297 = ORIENTED_EDGE('',*,*,#43298,.F.); +#43298 = EDGE_CURVE('',#42263,#43271,#43299,.T.); +#43299 = SURFACE_CURVE('',#43300,(#43304,#43311),.PCURVE_S1.); +#43300 = LINE('',#43301,#43302); +#43301 = CARTESIAN_POINT('',(168.005189,-50.128208,0.)); +#43302 = VECTOR('',#43303,1.); +#43303 = DIRECTION('',(0.906307515506,-0.422618844039,0.)); +#43304 = PCURVE('',#40728,#43305); +#43305 = DEFINITIONAL_REPRESENTATION('',(#43306),#43310); +#43306 = LINE('',#43307,#43308); +#43307 = CARTESIAN_POINT('',(-15.35669793298,38.991567313404)); +#43308 = VECTOR('',#43309,1.); +#43309 = DIRECTION('',(-0.906307515506,-0.422618844039)); +#43310 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43311 = PCURVE('',#43312,#43317); +#43312 = PLANE('',#43313); +#43313 = AXIS2_PLACEMENT_3D('',#43314,#43315,#43316); +#43314 = CARTESIAN_POINT('',(168.005189,-50.128208,0.)); +#43315 = DIRECTION('',(0.422618844039,0.906307515506,-0.)); +#43316 = DIRECTION('',(0.906307515506,-0.422618844039,0.)); +#43317 = DEFINITIONAL_REPRESENTATION('',(#43318),#43322); +#43318 = LINE('',#43319,#43320); +#43319 = CARTESIAN_POINT('',(0.,0.)); +#43320 = VECTOR('',#43321,1.); +#43321 = DIRECTION('',(1.,0.)); +#43322 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43323 = FACE_BOUND('',#43324,.T.); +#43324 = EDGE_LOOP('',(#43325,#43355,#43383,#43411,#43439,#43467,#43495, + #43523,#43551,#43579,#43607,#43635,#43663,#43691,#43719,#43747, + #43775,#43803,#43831,#43859,#43887,#43915,#43943,#43971,#43999, + #44027,#44055,#44083,#44111,#44139,#44167,#44195,#44223,#44251, + #44279,#44307,#44335,#44363)); +#43325 = ORIENTED_EDGE('',*,*,#43326,.F.); +#43326 = EDGE_CURVE('',#43327,#43329,#43331,.T.); +#43327 = VERTEX_POINT('',#43328); +#43328 = CARTESIAN_POINT('',(138.777887,-50.067303,0.)); +#43329 = VERTEX_POINT('',#43330); +#43330 = CARTESIAN_POINT('',(139.005189,-50.128208,0.)); +#43331 = SURFACE_CURVE('',#43332,(#43336,#43343),.PCURVE_S1.); +#43332 = LINE('',#43333,#43334); +#43333 = CARTESIAN_POINT('',(138.777887,-50.067303,0.)); +#43334 = VECTOR('',#43335,1.); +#43335 = DIRECTION('',(0.965926237789,-0.25881750936,0.)); +#43336 = PCURVE('',#40728,#43337); +#43337 = DEFINITIONAL_REPRESENTATION('',(#43338),#43342); +#43338 = LINE('',#43339,#43340); +#43339 = CARTESIAN_POINT('',(13.870604067017,39.052472313404)); +#43340 = VECTOR('',#43341,1.); +#43341 = DIRECTION('',(-0.965926237789,-0.25881750936)); +#43342 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43343 = PCURVE('',#43344,#43349); +#43344 = PLANE('',#43345); +#43345 = AXIS2_PLACEMENT_3D('',#43346,#43347,#43348); +#43346 = CARTESIAN_POINT('',(138.777887,-50.067303,0.)); +#43347 = DIRECTION('',(0.25881750936,0.965926237789,-0.)); +#43348 = DIRECTION('',(0.965926237789,-0.25881750936,0.)); +#43349 = DEFINITIONAL_REPRESENTATION('',(#43350),#43354); +#43350 = LINE('',#43351,#43352); +#43351 = CARTESIAN_POINT('',(0.,0.)); +#43352 = VECTOR('',#43353,1.); +#43353 = DIRECTION('',(1.,0.)); +#43354 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43355 = ORIENTED_EDGE('',*,*,#43356,.F.); +#43356 = EDGE_CURVE('',#43357,#43327,#43359,.T.); +#43357 = VERTEX_POINT('',#43358); +#43358 = CARTESIAN_POINT('',(138.543462,-50.046793,0.)); +#43359 = SURFACE_CURVE('',#43360,(#43364,#43371),.PCURVE_S1.); +#43360 = LINE('',#43361,#43362); +#43361 = CARTESIAN_POINT('',(138.543462,-50.046793,0.)); +#43362 = VECTOR('',#43363,1.); +#43363 = DIRECTION('',(0.996194524659,-8.715772507518E-02,0.)); +#43364 = PCURVE('',#40728,#43365); +#43365 = DEFINITIONAL_REPRESENTATION('',(#43366),#43370); +#43366 = LINE('',#43367,#43368); +#43367 = CARTESIAN_POINT('',(14.105029067017,39.072982313404)); +#43368 = VECTOR('',#43369,1.); +#43369 = DIRECTION('',(-0.996194524659,-8.715772507518E-02)); +#43370 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43371 = PCURVE('',#43372,#43377); +#43372 = PLANE('',#43373); +#43373 = AXIS2_PLACEMENT_3D('',#43374,#43375,#43376); +#43374 = CARTESIAN_POINT('',(138.543462,-50.046793,0.)); +#43375 = DIRECTION('',(8.715772507518E-02,0.996194524659,-0.)); +#43376 = DIRECTION('',(0.996194524659,-8.715772507518E-02,0.)); +#43377 = DEFINITIONAL_REPRESENTATION('',(#43378),#43382); +#43378 = LINE('',#43379,#43380); +#43379 = CARTESIAN_POINT('',(0.,0.)); +#43380 = VECTOR('',#43381,1.); +#43381 = DIRECTION('',(1.,0.)); +#43382 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43383 = ORIENTED_EDGE('',*,*,#43384,.F.); +#43384 = EDGE_CURVE('',#43385,#43357,#43387,.T.); +#43385 = VERTEX_POINT('',#43386); +#43386 = CARTESIAN_POINT('',(137.743462,-50.046793,0.)); +#43387 = SURFACE_CURVE('',#43388,(#43392,#43399),.PCURVE_S1.); +#43388 = LINE('',#43389,#43390); +#43389 = CARTESIAN_POINT('',(137.743462,-50.046793,0.)); +#43390 = VECTOR('',#43391,1.); +#43391 = DIRECTION('',(1.,0.,0.)); +#43392 = PCURVE('',#40728,#43393); +#43393 = DEFINITIONAL_REPRESENTATION('',(#43394),#43398); +#43394 = LINE('',#43395,#43396); +#43395 = CARTESIAN_POINT('',(14.905029067017,39.072982313404)); +#43396 = VECTOR('',#43397,1.); +#43397 = DIRECTION('',(-1.,0.)); +#43398 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43399 = PCURVE('',#43400,#43405); +#43400 = PLANE('',#43401); +#43401 = AXIS2_PLACEMENT_3D('',#43402,#43403,#43404); +#43402 = CARTESIAN_POINT('',(137.743462,-50.046793,0.)); +#43403 = DIRECTION('',(0.,1.,0.)); +#43404 = DIRECTION('',(1.,0.,0.)); +#43405 = DEFINITIONAL_REPRESENTATION('',(#43406),#43410); +#43406 = LINE('',#43407,#43408); +#43407 = CARTESIAN_POINT('',(0.,0.)); +#43408 = VECTOR('',#43409,1.); +#43409 = DIRECTION('',(1.,0.)); +#43410 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43411 = ORIENTED_EDGE('',*,*,#43412,.F.); +#43412 = EDGE_CURVE('',#43413,#43385,#43415,.T.); +#43413 = VERTEX_POINT('',#43414); +#43414 = CARTESIAN_POINT('',(137.509037,-50.067303,0.)); +#43415 = SURFACE_CURVE('',#43416,(#43420,#43427),.PCURVE_S1.); +#43416 = LINE('',#43417,#43418); +#43417 = CARTESIAN_POINT('',(137.509037,-50.067303,0.)); +#43418 = VECTOR('',#43419,1.); +#43419 = DIRECTION('',(0.996194524659,8.715772507518E-02,0.)); +#43420 = PCURVE('',#40728,#43421); +#43421 = DEFINITIONAL_REPRESENTATION('',(#43422),#43426); +#43422 = LINE('',#43423,#43424); +#43423 = CARTESIAN_POINT('',(15.139454067017,39.052472313404)); +#43424 = VECTOR('',#43425,1.); +#43425 = DIRECTION('',(-0.996194524659,8.715772507518E-02)); +#43426 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43427 = PCURVE('',#43428,#43433); +#43428 = PLANE('',#43429); +#43429 = AXIS2_PLACEMENT_3D('',#43430,#43431,#43432); +#43430 = CARTESIAN_POINT('',(137.509037,-50.067303,0.)); +#43431 = DIRECTION('',(-8.715772507518E-02,0.996194524659,0.)); +#43432 = DIRECTION('',(0.996194524659,8.715772507518E-02,0.)); +#43433 = DEFINITIONAL_REPRESENTATION('',(#43434),#43438); +#43434 = LINE('',#43435,#43436); +#43435 = CARTESIAN_POINT('',(0.,0.)); +#43436 = VECTOR('',#43437,1.); +#43437 = DIRECTION('',(1.,0.)); +#43438 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43439 = ORIENTED_EDGE('',*,*,#43440,.F.); +#43440 = EDGE_CURVE('',#43441,#43413,#43443,.T.); +#43441 = VERTEX_POINT('',#43442); +#43442 = CARTESIAN_POINT('',(137.281735,-50.128208,0.)); +#43443 = SURFACE_CURVE('',#43444,(#43448,#43455),.PCURVE_S1.); +#43444 = LINE('',#43445,#43446); +#43445 = CARTESIAN_POINT('',(137.281735,-50.128208,0.)); +#43446 = VECTOR('',#43447,1.); +#43447 = DIRECTION('',(0.965926237789,0.25881750936,0.)); +#43448 = PCURVE('',#40728,#43449); +#43449 = DEFINITIONAL_REPRESENTATION('',(#43450),#43454); +#43450 = LINE('',#43451,#43452); +#43451 = CARTESIAN_POINT('',(15.366756067017,38.991567313404)); +#43452 = VECTOR('',#43453,1.); +#43453 = DIRECTION('',(-0.965926237789,0.25881750936)); +#43454 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43455 = PCURVE('',#43456,#43461); +#43456 = PLANE('',#43457); +#43457 = AXIS2_PLACEMENT_3D('',#43458,#43459,#43460); +#43458 = CARTESIAN_POINT('',(137.281735,-50.128208,0.)); +#43459 = DIRECTION('',(-0.25881750936,0.965926237789,0.)); +#43460 = DIRECTION('',(0.965926237789,0.25881750936,0.)); +#43461 = DEFINITIONAL_REPRESENTATION('',(#43462),#43466); +#43462 = LINE('',#43463,#43464); +#43463 = CARTESIAN_POINT('',(0.,0.)); +#43464 = VECTOR('',#43465,1.); +#43465 = DIRECTION('',(1.,0.)); +#43466 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43467 = ORIENTED_EDGE('',*,*,#43468,.F.); +#43468 = EDGE_CURVE('',#43469,#43441,#43471,.T.); +#43469 = VERTEX_POINT('',#43470); +#43470 = CARTESIAN_POINT('',(137.068462,-50.227659,0.)); +#43471 = SURFACE_CURVE('',#43472,(#43476,#43483),.PCURVE_S1.); +#43472 = LINE('',#43473,#43474); +#43473 = CARTESIAN_POINT('',(137.068462,-50.227659,0.)); +#43474 = VECTOR('',#43475,1.); +#43475 = DIRECTION('',(0.906307515506,0.422618844039,0.)); +#43476 = PCURVE('',#40728,#43477); +#43477 = DEFINITIONAL_REPRESENTATION('',(#43478),#43482); +#43478 = LINE('',#43479,#43480); +#43479 = CARTESIAN_POINT('',(15.580029067017,38.892116313404)); +#43480 = VECTOR('',#43481,1.); +#43481 = DIRECTION('',(-0.906307515506,0.422618844039)); +#43482 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43483 = PCURVE('',#43484,#43489); +#43484 = PLANE('',#43485); +#43485 = AXIS2_PLACEMENT_3D('',#43486,#43487,#43488); +#43486 = CARTESIAN_POINT('',(137.068462,-50.227659,0.)); +#43487 = DIRECTION('',(-0.422618844039,0.906307515506,0.)); +#43488 = DIRECTION('',(0.906307515506,0.422618844039,0.)); +#43489 = DEFINITIONAL_REPRESENTATION('',(#43490),#43494); +#43490 = LINE('',#43491,#43492); +#43491 = CARTESIAN_POINT('',(0.,0.)); +#43492 = VECTOR('',#43493,1.); +#43493 = DIRECTION('',(1.,0.)); +#43494 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43495 = ORIENTED_EDGE('',*,*,#43496,.F.); +#43496 = EDGE_CURVE('',#43497,#43469,#43499,.T.); +#43497 = VERTEX_POINT('',#43498); +#43498 = CARTESIAN_POINT('',(136.875699,-50.362633,0.)); +#43499 = SURFACE_CURVE('',#43500,(#43504,#43511),.PCURVE_S1.); +#43500 = LINE('',#43501,#43502); +#43501 = CARTESIAN_POINT('',(136.875699,-50.362633,0.)); +#43502 = VECTOR('',#43503,1.); +#43503 = DIRECTION('',(0.819152255308,0.573576134984,0.)); +#43504 = PCURVE('',#40728,#43505); +#43505 = DEFINITIONAL_REPRESENTATION('',(#43506),#43510); +#43506 = LINE('',#43507,#43508); +#43507 = CARTESIAN_POINT('',(15.772792067017,38.757142313404)); +#43508 = VECTOR('',#43509,1.); +#43509 = DIRECTION('',(-0.819152255308,0.573576134984)); +#43510 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43511 = PCURVE('',#43512,#43517); +#43512 = PLANE('',#43513); +#43513 = AXIS2_PLACEMENT_3D('',#43514,#43515,#43516); +#43514 = CARTESIAN_POINT('',(136.875699,-50.362633,0.)); +#43515 = DIRECTION('',(-0.573576134984,0.819152255308,0.)); +#43516 = DIRECTION('',(0.819152255308,0.573576134984,0.)); +#43517 = DEFINITIONAL_REPRESENTATION('',(#43518),#43522); +#43518 = LINE('',#43519,#43520); +#43519 = CARTESIAN_POINT('',(0.,0.)); +#43520 = VECTOR('',#43521,1.); +#43521 = DIRECTION('',(1.,0.)); +#43522 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43523 = ORIENTED_EDGE('',*,*,#43524,.F.); +#43524 = EDGE_CURVE('',#43525,#43497,#43527,.T.); +#43525 = VERTEX_POINT('',#43526); +#43526 = CARTESIAN_POINT('',(136.709302,-50.52903,0.)); +#43527 = SURFACE_CURVE('',#43528,(#43532,#43539),.PCURVE_S1.); +#43528 = LINE('',#43529,#43530); +#43529 = CARTESIAN_POINT('',(136.709302,-50.52903,0.)); +#43530 = VECTOR('',#43531,1.); +#43531 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#43532 = PCURVE('',#40728,#43533); +#43533 = DEFINITIONAL_REPRESENTATION('',(#43534),#43538); +#43534 = LINE('',#43535,#43536); +#43535 = CARTESIAN_POINT('',(15.939189067017,38.590745313404)); +#43536 = VECTOR('',#43537,1.); +#43537 = DIRECTION('',(-0.707106781187,0.707106781187)); +#43538 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43539 = PCURVE('',#43540,#43545); +#43540 = PLANE('',#43541); +#43541 = AXIS2_PLACEMENT_3D('',#43542,#43543,#43544); +#43542 = CARTESIAN_POINT('',(136.709302,-50.52903,0.)); +#43543 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#43544 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#43545 = DEFINITIONAL_REPRESENTATION('',(#43546),#43550); +#43546 = LINE('',#43547,#43548); +#43547 = CARTESIAN_POINT('',(0.,0.)); +#43548 = VECTOR('',#43549,1.); +#43549 = DIRECTION('',(1.,0.)); +#43550 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43551 = ORIENTED_EDGE('',*,*,#43552,.F.); +#43552 = EDGE_CURVE('',#43553,#43525,#43555,.T.); +#43553 = VERTEX_POINT('',#43554); +#43554 = CARTESIAN_POINT('',(136.574328,-50.721793,0.)); +#43555 = SURFACE_CURVE('',#43556,(#43560,#43567),.PCURVE_S1.); +#43556 = LINE('',#43557,#43558); +#43557 = CARTESIAN_POINT('',(136.574328,-50.721793,0.)); +#43558 = VECTOR('',#43559,1.); +#43559 = DIRECTION('',(0.573576134984,0.819152255308,0.)); +#43560 = PCURVE('',#40728,#43561); +#43561 = DEFINITIONAL_REPRESENTATION('',(#43562),#43566); +#43562 = LINE('',#43563,#43564); +#43563 = CARTESIAN_POINT('',(16.074163067017,38.397982313404)); +#43564 = VECTOR('',#43565,1.); +#43565 = DIRECTION('',(-0.573576134984,0.819152255308)); +#43566 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43567 = PCURVE('',#43568,#43573); +#43568 = PLANE('',#43569); +#43569 = AXIS2_PLACEMENT_3D('',#43570,#43571,#43572); +#43570 = CARTESIAN_POINT('',(136.574328,-50.721793,0.)); +#43571 = DIRECTION('',(-0.819152255308,0.573576134984,0.)); +#43572 = DIRECTION('',(0.573576134984,0.819152255308,0.)); +#43573 = DEFINITIONAL_REPRESENTATION('',(#43574),#43578); +#43574 = LINE('',#43575,#43576); +#43575 = CARTESIAN_POINT('',(0.,0.)); +#43576 = VECTOR('',#43577,1.); +#43577 = DIRECTION('',(1.,0.)); +#43578 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43579 = ORIENTED_EDGE('',*,*,#43580,.F.); +#43580 = EDGE_CURVE('',#43581,#43553,#43583,.T.); +#43581 = VERTEX_POINT('',#43582); +#43582 = CARTESIAN_POINT('',(136.474877,-50.935066,0.)); +#43583 = SURFACE_CURVE('',#43584,(#43588,#43595),.PCURVE_S1.); +#43584 = LINE('',#43585,#43586); +#43585 = CARTESIAN_POINT('',(136.474877,-50.935066,0.)); +#43586 = VECTOR('',#43587,1.); +#43587 = DIRECTION('',(0.422618844039,0.906307515506,0.)); +#43588 = PCURVE('',#40728,#43589); +#43589 = DEFINITIONAL_REPRESENTATION('',(#43590),#43594); +#43590 = LINE('',#43591,#43592); +#43591 = CARTESIAN_POINT('',(16.173614067017,38.184709313404)); +#43592 = VECTOR('',#43593,1.); +#43593 = DIRECTION('',(-0.422618844039,0.906307515506)); +#43594 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43595 = PCURVE('',#43596,#43601); +#43596 = PLANE('',#43597); +#43597 = AXIS2_PLACEMENT_3D('',#43598,#43599,#43600); +#43598 = CARTESIAN_POINT('',(136.474877,-50.935066,0.)); +#43599 = DIRECTION('',(-0.906307515506,0.422618844039,0.)); +#43600 = DIRECTION('',(0.422618844039,0.906307515506,0.)); +#43601 = DEFINITIONAL_REPRESENTATION('',(#43602),#43606); +#43602 = LINE('',#43603,#43604); +#43603 = CARTESIAN_POINT('',(0.,0.)); +#43604 = VECTOR('',#43605,1.); +#43605 = DIRECTION('',(1.,0.)); +#43606 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43607 = ORIENTED_EDGE('',*,*,#43608,.F.); +#43608 = EDGE_CURVE('',#43609,#43581,#43611,.T.); +#43609 = VERTEX_POINT('',#43610); +#43610 = CARTESIAN_POINT('',(136.413972,-51.162368,0.)); +#43611 = SURFACE_CURVE('',#43612,(#43616,#43623),.PCURVE_S1.); +#43612 = LINE('',#43613,#43614); +#43613 = CARTESIAN_POINT('',(136.413972,-51.162368,0.)); +#43614 = VECTOR('',#43615,1.); +#43615 = DIRECTION('',(0.25881750936,0.965926237789,0.)); +#43616 = PCURVE('',#40728,#43617); +#43617 = DEFINITIONAL_REPRESENTATION('',(#43618),#43622); +#43618 = LINE('',#43619,#43620); +#43619 = CARTESIAN_POINT('',(16.234519067017,37.957407313404)); +#43620 = VECTOR('',#43621,1.); +#43621 = DIRECTION('',(-0.25881750936,0.965926237789)); +#43622 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43623 = PCURVE('',#43624,#43629); +#43624 = PLANE('',#43625); +#43625 = AXIS2_PLACEMENT_3D('',#43626,#43627,#43628); +#43626 = CARTESIAN_POINT('',(136.413972,-51.162368,0.)); +#43627 = DIRECTION('',(-0.965926237789,0.25881750936,0.)); +#43628 = DIRECTION('',(0.25881750936,0.965926237789,0.)); +#43629 = DEFINITIONAL_REPRESENTATION('',(#43630),#43634); +#43630 = LINE('',#43631,#43632); +#43631 = CARTESIAN_POINT('',(0.,0.)); +#43632 = VECTOR('',#43633,1.); +#43633 = DIRECTION('',(1.,0.)); +#43634 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43635 = ORIENTED_EDGE('',*,*,#43636,.F.); +#43636 = EDGE_CURVE('',#43637,#43609,#43639,.T.); +#43637 = VERTEX_POINT('',#43638); +#43638 = CARTESIAN_POINT('',(136.393462,-51.396793,0.)); +#43639 = SURFACE_CURVE('',#43640,(#43644,#43651),.PCURVE_S1.); +#43640 = LINE('',#43641,#43642); +#43641 = CARTESIAN_POINT('',(136.393462,-51.396793,0.)); +#43642 = VECTOR('',#43643,1.); +#43643 = DIRECTION('',(8.715772507518E-02,0.996194524659,0.)); +#43644 = PCURVE('',#40728,#43645); +#43645 = DEFINITIONAL_REPRESENTATION('',(#43646),#43650); +#43646 = LINE('',#43647,#43648); +#43647 = CARTESIAN_POINT('',(16.255029067017,37.722982313404)); +#43648 = VECTOR('',#43649,1.); +#43649 = DIRECTION('',(-8.715772507518E-02,0.996194524659)); +#43650 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43651 = PCURVE('',#43652,#43657); +#43652 = PLANE('',#43653); +#43653 = AXIS2_PLACEMENT_3D('',#43654,#43655,#43656); +#43654 = CARTESIAN_POINT('',(136.393462,-51.396793,0.)); +#43655 = DIRECTION('',(-0.996194524659,8.715772507518E-02,0.)); +#43656 = DIRECTION('',(8.715772507518E-02,0.996194524659,0.)); +#43657 = DEFINITIONAL_REPRESENTATION('',(#43658),#43662); +#43658 = LINE('',#43659,#43660); +#43659 = CARTESIAN_POINT('',(0.,0.)); +#43660 = VECTOR('',#43661,1.); +#43661 = DIRECTION('',(1.,0.)); +#43662 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43663 = ORIENTED_EDGE('',*,*,#43664,.F.); +#43664 = EDGE_CURVE('',#43665,#43637,#43667,.T.); +#43665 = VERTEX_POINT('',#43666); +#43666 = CARTESIAN_POINT('',(136.413972,-51.631218,0.)); +#43667 = SURFACE_CURVE('',#43668,(#43672,#43679),.PCURVE_S1.); +#43668 = LINE('',#43669,#43670); +#43669 = CARTESIAN_POINT('',(136.413972,-51.631218,0.)); +#43670 = VECTOR('',#43671,1.); +#43671 = DIRECTION('',(-8.715772507518E-02,0.996194524659,0.)); +#43672 = PCURVE('',#40728,#43673); +#43673 = DEFINITIONAL_REPRESENTATION('',(#43674),#43678); +#43674 = LINE('',#43675,#43676); +#43675 = CARTESIAN_POINT('',(16.234519067017,37.488557313404)); +#43676 = VECTOR('',#43677,1.); +#43677 = DIRECTION('',(8.715772507518E-02,0.996194524659)); +#43678 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43679 = PCURVE('',#43680,#43685); +#43680 = PLANE('',#43681); +#43681 = AXIS2_PLACEMENT_3D('',#43682,#43683,#43684); +#43682 = CARTESIAN_POINT('',(136.413972,-51.631218,0.)); +#43683 = DIRECTION('',(-0.996194524659,-8.715772507518E-02,0.)); +#43684 = DIRECTION('',(-8.715772507518E-02,0.996194524659,0.)); +#43685 = DEFINITIONAL_REPRESENTATION('',(#43686),#43690); +#43686 = LINE('',#43687,#43688); +#43687 = CARTESIAN_POINT('',(0.,0.)); +#43688 = VECTOR('',#43689,1.); +#43689 = DIRECTION('',(1.,0.)); +#43690 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43691 = ORIENTED_EDGE('',*,*,#43692,.F.); +#43692 = EDGE_CURVE('',#43693,#43665,#43695,.T.); +#43693 = VERTEX_POINT('',#43694); +#43694 = CARTESIAN_POINT('',(136.474877,-51.85852,0.)); +#43695 = SURFACE_CURVE('',#43696,(#43700,#43707),.PCURVE_S1.); +#43696 = LINE('',#43697,#43698); +#43697 = CARTESIAN_POINT('',(136.474877,-51.85852,0.)); +#43698 = VECTOR('',#43699,1.); +#43699 = DIRECTION('',(-0.25881750936,0.965926237789,0.)); +#43700 = PCURVE('',#40728,#43701); +#43701 = DEFINITIONAL_REPRESENTATION('',(#43702),#43706); +#43702 = LINE('',#43703,#43704); +#43703 = CARTESIAN_POINT('',(16.173614067017,37.261255313404)); +#43704 = VECTOR('',#43705,1.); +#43705 = DIRECTION('',(0.25881750936,0.965926237789)); +#43706 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43707 = PCURVE('',#43708,#43713); +#43708 = PLANE('',#43709); +#43709 = AXIS2_PLACEMENT_3D('',#43710,#43711,#43712); +#43710 = CARTESIAN_POINT('',(136.474877,-51.85852,0.)); +#43711 = DIRECTION('',(-0.965926237789,-0.25881750936,0.)); +#43712 = DIRECTION('',(-0.25881750936,0.965926237789,0.)); +#43713 = DEFINITIONAL_REPRESENTATION('',(#43714),#43718); +#43714 = LINE('',#43715,#43716); +#43715 = CARTESIAN_POINT('',(0.,0.)); +#43716 = VECTOR('',#43717,1.); +#43717 = DIRECTION('',(1.,0.)); +#43718 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43719 = ORIENTED_EDGE('',*,*,#43720,.F.); +#43720 = EDGE_CURVE('',#43721,#43693,#43723,.T.); +#43721 = VERTEX_POINT('',#43722); +#43722 = CARTESIAN_POINT('',(136.574328,-52.071793,0.)); +#43723 = SURFACE_CURVE('',#43724,(#43728,#43735),.PCURVE_S1.); +#43724 = LINE('',#43725,#43726); +#43725 = CARTESIAN_POINT('',(136.574328,-52.071793,0.)); +#43726 = VECTOR('',#43727,1.); +#43727 = DIRECTION('',(-0.422618844039,0.906307515506,0.)); +#43728 = PCURVE('',#40728,#43729); +#43729 = DEFINITIONAL_REPRESENTATION('',(#43730),#43734); +#43730 = LINE('',#43731,#43732); +#43731 = CARTESIAN_POINT('',(16.074163067017,37.047982313404)); +#43732 = VECTOR('',#43733,1.); +#43733 = DIRECTION('',(0.422618844039,0.906307515506)); +#43734 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43735 = PCURVE('',#43736,#43741); +#43736 = PLANE('',#43737); +#43737 = AXIS2_PLACEMENT_3D('',#43738,#43739,#43740); +#43738 = CARTESIAN_POINT('',(136.574328,-52.071793,0.)); +#43739 = DIRECTION('',(-0.906307515506,-0.422618844039,0.)); +#43740 = DIRECTION('',(-0.422618844039,0.906307515506,0.)); +#43741 = DEFINITIONAL_REPRESENTATION('',(#43742),#43746); +#43742 = LINE('',#43743,#43744); +#43743 = CARTESIAN_POINT('',(0.,0.)); +#43744 = VECTOR('',#43745,1.); +#43745 = DIRECTION('',(1.,0.)); +#43746 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43747 = ORIENTED_EDGE('',*,*,#43748,.F.); +#43748 = EDGE_CURVE('',#43749,#43721,#43751,.T.); +#43749 = VERTEX_POINT('',#43750); +#43750 = CARTESIAN_POINT('',(136.709302,-52.264556,0.)); +#43751 = SURFACE_CURVE('',#43752,(#43756,#43763),.PCURVE_S1.); +#43752 = LINE('',#43753,#43754); +#43753 = CARTESIAN_POINT('',(136.709302,-52.264556,0.)); +#43754 = VECTOR('',#43755,1.); +#43755 = DIRECTION('',(-0.573576134984,0.819152255308,0.)); +#43756 = PCURVE('',#40728,#43757); +#43757 = DEFINITIONAL_REPRESENTATION('',(#43758),#43762); +#43758 = LINE('',#43759,#43760); +#43759 = CARTESIAN_POINT('',(15.939189067017,36.855219313404)); +#43760 = VECTOR('',#43761,1.); +#43761 = DIRECTION('',(0.573576134984,0.819152255308)); +#43762 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43763 = PCURVE('',#43764,#43769); +#43764 = PLANE('',#43765); +#43765 = AXIS2_PLACEMENT_3D('',#43766,#43767,#43768); +#43766 = CARTESIAN_POINT('',(136.709302,-52.264556,0.)); +#43767 = DIRECTION('',(-0.819152255308,-0.573576134984,0.)); +#43768 = DIRECTION('',(-0.573576134984,0.819152255308,0.)); +#43769 = DEFINITIONAL_REPRESENTATION('',(#43770),#43774); +#43770 = LINE('',#43771,#43772); +#43771 = CARTESIAN_POINT('',(0.,0.)); +#43772 = VECTOR('',#43773,1.); +#43773 = DIRECTION('',(1.,0.)); +#43774 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43775 = ORIENTED_EDGE('',*,*,#43776,.F.); +#43776 = EDGE_CURVE('',#43777,#43749,#43779,.T.); +#43777 = VERTEX_POINT('',#43778); +#43778 = CARTESIAN_POINT('',(136.875699,-52.430953,0.)); +#43779 = SURFACE_CURVE('',#43780,(#43784,#43791),.PCURVE_S1.); +#43780 = LINE('',#43781,#43782); +#43781 = CARTESIAN_POINT('',(136.875699,-52.430953,0.)); +#43782 = VECTOR('',#43783,1.); +#43783 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#43784 = PCURVE('',#40728,#43785); +#43785 = DEFINITIONAL_REPRESENTATION('',(#43786),#43790); +#43786 = LINE('',#43787,#43788); +#43787 = CARTESIAN_POINT('',(15.772792067017,36.688822313404)); +#43788 = VECTOR('',#43789,1.); +#43789 = DIRECTION('',(0.707106781187,0.707106781187)); +#43790 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43791 = PCURVE('',#43792,#43797); +#43792 = PLANE('',#43793); +#43793 = AXIS2_PLACEMENT_3D('',#43794,#43795,#43796); +#43794 = CARTESIAN_POINT('',(136.875699,-52.430953,0.)); +#43795 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#43796 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#43797 = DEFINITIONAL_REPRESENTATION('',(#43798),#43802); +#43798 = LINE('',#43799,#43800); +#43799 = CARTESIAN_POINT('',(0.,0.)); +#43800 = VECTOR('',#43801,1.); +#43801 = DIRECTION('',(1.,0.)); +#43802 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43803 = ORIENTED_EDGE('',*,*,#43804,.F.); +#43804 = EDGE_CURVE('',#43805,#43777,#43807,.T.); +#43805 = VERTEX_POINT('',#43806); +#43806 = CARTESIAN_POINT('',(137.068462,-52.565927,0.)); +#43807 = SURFACE_CURVE('',#43808,(#43812,#43819),.PCURVE_S1.); +#43808 = LINE('',#43809,#43810); +#43809 = CARTESIAN_POINT('',(137.068462,-52.565927,0.)); +#43810 = VECTOR('',#43811,1.); +#43811 = DIRECTION('',(-0.819152255308,0.573576134984,0.)); +#43812 = PCURVE('',#40728,#43813); +#43813 = DEFINITIONAL_REPRESENTATION('',(#43814),#43818); +#43814 = LINE('',#43815,#43816); +#43815 = CARTESIAN_POINT('',(15.580029067017,36.553848313404)); +#43816 = VECTOR('',#43817,1.); +#43817 = DIRECTION('',(0.819152255308,0.573576134984)); +#43818 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43819 = PCURVE('',#43820,#43825); +#43820 = PLANE('',#43821); +#43821 = AXIS2_PLACEMENT_3D('',#43822,#43823,#43824); +#43822 = CARTESIAN_POINT('',(137.068462,-52.565927,0.)); +#43823 = DIRECTION('',(-0.573576134984,-0.819152255308,0.)); +#43824 = DIRECTION('',(-0.819152255308,0.573576134984,0.)); +#43825 = DEFINITIONAL_REPRESENTATION('',(#43826),#43830); +#43826 = LINE('',#43827,#43828); +#43827 = CARTESIAN_POINT('',(0.,0.)); +#43828 = VECTOR('',#43829,1.); +#43829 = DIRECTION('',(1.,0.)); +#43830 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43831 = ORIENTED_EDGE('',*,*,#43832,.F.); +#43832 = EDGE_CURVE('',#43833,#43805,#43835,.T.); +#43833 = VERTEX_POINT('',#43834); +#43834 = CARTESIAN_POINT('',(137.281735,-52.665378,0.)); +#43835 = SURFACE_CURVE('',#43836,(#43840,#43847),.PCURVE_S1.); +#43836 = LINE('',#43837,#43838); +#43837 = CARTESIAN_POINT('',(137.281735,-52.665378,0.)); +#43838 = VECTOR('',#43839,1.); +#43839 = DIRECTION('',(-0.906307515506,0.422618844039,0.)); +#43840 = PCURVE('',#40728,#43841); +#43841 = DEFINITIONAL_REPRESENTATION('',(#43842),#43846); +#43842 = LINE('',#43843,#43844); +#43843 = CARTESIAN_POINT('',(15.366756067017,36.454397313404)); +#43844 = VECTOR('',#43845,1.); +#43845 = DIRECTION('',(0.906307515506,0.422618844039)); +#43846 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43847 = PCURVE('',#43848,#43853); +#43848 = PLANE('',#43849); +#43849 = AXIS2_PLACEMENT_3D('',#43850,#43851,#43852); +#43850 = CARTESIAN_POINT('',(137.281735,-52.665378,0.)); +#43851 = DIRECTION('',(-0.422618844039,-0.906307515506,0.)); +#43852 = DIRECTION('',(-0.906307515506,0.422618844039,0.)); +#43853 = DEFINITIONAL_REPRESENTATION('',(#43854),#43858); +#43854 = LINE('',#43855,#43856); +#43855 = CARTESIAN_POINT('',(0.,0.)); +#43856 = VECTOR('',#43857,1.); +#43857 = DIRECTION('',(1.,0.)); +#43858 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43859 = ORIENTED_EDGE('',*,*,#43860,.F.); +#43860 = EDGE_CURVE('',#43861,#43833,#43863,.T.); +#43861 = VERTEX_POINT('',#43862); +#43862 = CARTESIAN_POINT('',(137.509037,-52.726283,0.)); +#43863 = SURFACE_CURVE('',#43864,(#43868,#43875),.PCURVE_S1.); +#43864 = LINE('',#43865,#43866); +#43865 = CARTESIAN_POINT('',(137.509037,-52.726283,0.)); +#43866 = VECTOR('',#43867,1.); +#43867 = DIRECTION('',(-0.965926237789,0.25881750936,0.)); +#43868 = PCURVE('',#40728,#43869); +#43869 = DEFINITIONAL_REPRESENTATION('',(#43870),#43874); +#43870 = LINE('',#43871,#43872); +#43871 = CARTESIAN_POINT('',(15.139454067017,36.393492313404)); +#43872 = VECTOR('',#43873,1.); +#43873 = DIRECTION('',(0.965926237789,0.25881750936)); +#43874 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43875 = PCURVE('',#43876,#43881); +#43876 = PLANE('',#43877); +#43877 = AXIS2_PLACEMENT_3D('',#43878,#43879,#43880); +#43878 = CARTESIAN_POINT('',(137.509037,-52.726283,0.)); +#43879 = DIRECTION('',(-0.25881750936,-0.965926237789,0.)); +#43880 = DIRECTION('',(-0.965926237789,0.25881750936,0.)); +#43881 = DEFINITIONAL_REPRESENTATION('',(#43882),#43886); +#43882 = LINE('',#43883,#43884); +#43883 = CARTESIAN_POINT('',(0.,0.)); +#43884 = VECTOR('',#43885,1.); +#43885 = DIRECTION('',(1.,0.)); +#43886 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43887 = ORIENTED_EDGE('',*,*,#43888,.F.); +#43888 = EDGE_CURVE('',#43889,#43861,#43891,.T.); +#43889 = VERTEX_POINT('',#43890); +#43890 = CARTESIAN_POINT('',(137.743462,-52.746793,0.)); +#43891 = SURFACE_CURVE('',#43892,(#43896,#43903),.PCURVE_S1.); +#43892 = LINE('',#43893,#43894); +#43893 = CARTESIAN_POINT('',(137.743462,-52.746793,0.)); +#43894 = VECTOR('',#43895,1.); +#43895 = DIRECTION('',(-0.996194524659,8.715772507515E-02,0.)); +#43896 = PCURVE('',#40728,#43897); +#43897 = DEFINITIONAL_REPRESENTATION('',(#43898),#43902); +#43898 = LINE('',#43899,#43900); +#43899 = CARTESIAN_POINT('',(14.905029067017,36.372982313404)); +#43900 = VECTOR('',#43901,1.); +#43901 = DIRECTION('',(0.996194524659,8.715772507515E-02)); +#43902 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43903 = PCURVE('',#43904,#43909); +#43904 = PLANE('',#43905); +#43905 = AXIS2_PLACEMENT_3D('',#43906,#43907,#43908); +#43906 = CARTESIAN_POINT('',(137.743462,-52.746793,0.)); +#43907 = DIRECTION('',(-8.715772507515E-02,-0.996194524659,0.)); +#43908 = DIRECTION('',(-0.996194524659,8.715772507515E-02,0.)); +#43909 = DEFINITIONAL_REPRESENTATION('',(#43910),#43914); +#43910 = LINE('',#43911,#43912); +#43911 = CARTESIAN_POINT('',(0.,0.)); +#43912 = VECTOR('',#43913,1.); +#43913 = DIRECTION('',(1.,0.)); +#43914 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43915 = ORIENTED_EDGE('',*,*,#43916,.F.); +#43916 = EDGE_CURVE('',#43917,#43889,#43919,.T.); +#43917 = VERTEX_POINT('',#43918); +#43918 = CARTESIAN_POINT('',(138.543462,-52.746793,0.)); +#43919 = SURFACE_CURVE('',#43920,(#43924,#43931),.PCURVE_S1.); +#43920 = LINE('',#43921,#43922); +#43921 = CARTESIAN_POINT('',(138.543462,-52.746793,0.)); +#43922 = VECTOR('',#43923,1.); +#43923 = DIRECTION('',(-1.,0.,0.)); +#43924 = PCURVE('',#40728,#43925); +#43925 = DEFINITIONAL_REPRESENTATION('',(#43926),#43930); +#43926 = LINE('',#43927,#43928); +#43927 = CARTESIAN_POINT('',(14.105029067017,36.372982313404)); +#43928 = VECTOR('',#43929,1.); +#43929 = DIRECTION('',(1.,0.)); +#43930 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43931 = PCURVE('',#43932,#43937); +#43932 = PLANE('',#43933); +#43933 = AXIS2_PLACEMENT_3D('',#43934,#43935,#43936); +#43934 = CARTESIAN_POINT('',(138.543462,-52.746793,0.)); +#43935 = DIRECTION('',(0.,-1.,0.)); +#43936 = DIRECTION('',(-1.,0.,0.)); +#43937 = DEFINITIONAL_REPRESENTATION('',(#43938),#43942); +#43938 = LINE('',#43939,#43940); +#43939 = CARTESIAN_POINT('',(0.,-0.)); +#43940 = VECTOR('',#43941,1.); +#43941 = DIRECTION('',(1.,0.)); +#43942 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43943 = ORIENTED_EDGE('',*,*,#43944,.F.); +#43944 = EDGE_CURVE('',#43945,#43917,#43947,.T.); +#43945 = VERTEX_POINT('',#43946); +#43946 = CARTESIAN_POINT('',(138.777887,-52.726283,0.)); +#43947 = SURFACE_CURVE('',#43948,(#43952,#43959),.PCURVE_S1.); +#43948 = LINE('',#43949,#43950); +#43949 = CARTESIAN_POINT('',(138.777887,-52.726283,0.)); +#43950 = VECTOR('',#43951,1.); +#43951 = DIRECTION('',(-0.996194524659,-8.715772507515E-02,0.)); +#43952 = PCURVE('',#40728,#43953); +#43953 = DEFINITIONAL_REPRESENTATION('',(#43954),#43958); +#43954 = LINE('',#43955,#43956); +#43955 = CARTESIAN_POINT('',(13.870604067017,36.393492313404)); +#43956 = VECTOR('',#43957,1.); +#43957 = DIRECTION('',(0.996194524659,-8.715772507515E-02)); +#43958 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43959 = PCURVE('',#43960,#43965); +#43960 = PLANE('',#43961); +#43961 = AXIS2_PLACEMENT_3D('',#43962,#43963,#43964); +#43962 = CARTESIAN_POINT('',(138.777887,-52.726283,0.)); +#43963 = DIRECTION('',(8.715772507515E-02,-0.996194524659,0.)); +#43964 = DIRECTION('',(-0.996194524659,-8.715772507515E-02,0.)); +#43965 = DEFINITIONAL_REPRESENTATION('',(#43966),#43970); +#43966 = LINE('',#43967,#43968); +#43967 = CARTESIAN_POINT('',(0.,0.)); +#43968 = VECTOR('',#43969,1.); +#43969 = DIRECTION('',(1.,0.)); +#43970 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43971 = ORIENTED_EDGE('',*,*,#43972,.F.); +#43972 = EDGE_CURVE('',#43973,#43945,#43975,.T.); +#43973 = VERTEX_POINT('',#43974); +#43974 = CARTESIAN_POINT('',(139.005189,-52.665378,0.)); +#43975 = SURFACE_CURVE('',#43976,(#43980,#43987),.PCURVE_S1.); +#43976 = LINE('',#43977,#43978); +#43977 = CARTESIAN_POINT('',(139.005189,-52.665378,0.)); +#43978 = VECTOR('',#43979,1.); +#43979 = DIRECTION('',(-0.965926237789,-0.25881750936,0.)); +#43980 = PCURVE('',#40728,#43981); +#43981 = DEFINITIONAL_REPRESENTATION('',(#43982),#43986); +#43982 = LINE('',#43983,#43984); +#43983 = CARTESIAN_POINT('',(13.643302067017,36.454397313404)); +#43984 = VECTOR('',#43985,1.); +#43985 = DIRECTION('',(0.965926237789,-0.25881750936)); +#43986 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43987 = PCURVE('',#43988,#43993); +#43988 = PLANE('',#43989); +#43989 = AXIS2_PLACEMENT_3D('',#43990,#43991,#43992); +#43990 = CARTESIAN_POINT('',(139.005189,-52.665378,0.)); +#43991 = DIRECTION('',(0.25881750936,-0.965926237789,0.)); +#43992 = DIRECTION('',(-0.965926237789,-0.25881750936,0.)); +#43993 = DEFINITIONAL_REPRESENTATION('',(#43994),#43998); +#43994 = LINE('',#43995,#43996); +#43995 = CARTESIAN_POINT('',(0.,0.)); +#43996 = VECTOR('',#43997,1.); +#43997 = DIRECTION('',(1.,0.)); +#43998 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#43999 = ORIENTED_EDGE('',*,*,#44000,.F.); +#44000 = EDGE_CURVE('',#44001,#43973,#44003,.T.); +#44001 = VERTEX_POINT('',#44002); +#44002 = CARTESIAN_POINT('',(139.218462,-52.565927,0.)); +#44003 = SURFACE_CURVE('',#44004,(#44008,#44015),.PCURVE_S1.); +#44004 = LINE('',#44005,#44006); +#44005 = CARTESIAN_POINT('',(139.218462,-52.565927,0.)); +#44006 = VECTOR('',#44007,1.); +#44007 = DIRECTION('',(-0.906307515506,-0.422618844039,0.)); +#44008 = PCURVE('',#40728,#44009); +#44009 = DEFINITIONAL_REPRESENTATION('',(#44010),#44014); +#44010 = LINE('',#44011,#44012); +#44011 = CARTESIAN_POINT('',(13.430029067017,36.553848313404)); +#44012 = VECTOR('',#44013,1.); +#44013 = DIRECTION('',(0.906307515506,-0.422618844039)); +#44014 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44015 = PCURVE('',#44016,#44021); +#44016 = PLANE('',#44017); +#44017 = AXIS2_PLACEMENT_3D('',#44018,#44019,#44020); +#44018 = CARTESIAN_POINT('',(139.218462,-52.565927,0.)); +#44019 = DIRECTION('',(0.422618844039,-0.906307515506,0.)); +#44020 = DIRECTION('',(-0.906307515506,-0.422618844039,0.)); +#44021 = DEFINITIONAL_REPRESENTATION('',(#44022),#44026); +#44022 = LINE('',#44023,#44024); +#44023 = CARTESIAN_POINT('',(0.,0.)); +#44024 = VECTOR('',#44025,1.); +#44025 = DIRECTION('',(1.,0.)); +#44026 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44027 = ORIENTED_EDGE('',*,*,#44028,.F.); +#44028 = EDGE_CURVE('',#44029,#44001,#44031,.T.); +#44029 = VERTEX_POINT('',#44030); +#44030 = CARTESIAN_POINT('',(139.411225,-52.430953,0.)); +#44031 = SURFACE_CURVE('',#44032,(#44036,#44043),.PCURVE_S1.); +#44032 = LINE('',#44033,#44034); +#44033 = CARTESIAN_POINT('',(139.411225,-52.430953,0.)); +#44034 = VECTOR('',#44035,1.); +#44035 = DIRECTION('',(-0.819152255308,-0.573576134984,0.)); +#44036 = PCURVE('',#40728,#44037); +#44037 = DEFINITIONAL_REPRESENTATION('',(#44038),#44042); +#44038 = LINE('',#44039,#44040); +#44039 = CARTESIAN_POINT('',(13.237266067017,36.688822313404)); +#44040 = VECTOR('',#44041,1.); +#44041 = DIRECTION('',(0.819152255308,-0.573576134984)); +#44042 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44043 = PCURVE('',#44044,#44049); +#44044 = PLANE('',#44045); +#44045 = AXIS2_PLACEMENT_3D('',#44046,#44047,#44048); +#44046 = CARTESIAN_POINT('',(139.411225,-52.430953,0.)); +#44047 = DIRECTION('',(0.573576134984,-0.819152255308,0.)); +#44048 = DIRECTION('',(-0.819152255308,-0.573576134984,0.)); +#44049 = DEFINITIONAL_REPRESENTATION('',(#44050),#44054); +#44050 = LINE('',#44051,#44052); +#44051 = CARTESIAN_POINT('',(0.,0.)); +#44052 = VECTOR('',#44053,1.); +#44053 = DIRECTION('',(1.,0.)); +#44054 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44055 = ORIENTED_EDGE('',*,*,#44056,.F.); +#44056 = EDGE_CURVE('',#44057,#44029,#44059,.T.); +#44057 = VERTEX_POINT('',#44058); +#44058 = CARTESIAN_POINT('',(139.577622,-52.264556,0.)); +#44059 = SURFACE_CURVE('',#44060,(#44064,#44071),.PCURVE_S1.); +#44060 = LINE('',#44061,#44062); +#44061 = CARTESIAN_POINT('',(139.577622,-52.264556,0.)); +#44062 = VECTOR('',#44063,1.); +#44063 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#44064 = PCURVE('',#40728,#44065); +#44065 = DEFINITIONAL_REPRESENTATION('',(#44066),#44070); +#44066 = LINE('',#44067,#44068); +#44067 = CARTESIAN_POINT('',(13.070869067017,36.855219313404)); +#44068 = VECTOR('',#44069,1.); +#44069 = DIRECTION('',(0.707106781187,-0.707106781187)); +#44070 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44071 = PCURVE('',#44072,#44077); +#44072 = PLANE('',#44073); +#44073 = AXIS2_PLACEMENT_3D('',#44074,#44075,#44076); +#44074 = CARTESIAN_POINT('',(139.577622,-52.264556,0.)); +#44075 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#44076 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#44077 = DEFINITIONAL_REPRESENTATION('',(#44078),#44082); +#44078 = LINE('',#44079,#44080); +#44079 = CARTESIAN_POINT('',(0.,0.)); +#44080 = VECTOR('',#44081,1.); +#44081 = DIRECTION('',(1.,0.)); +#44082 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44083 = ORIENTED_EDGE('',*,*,#44084,.F.); +#44084 = EDGE_CURVE('',#44085,#44057,#44087,.T.); +#44085 = VERTEX_POINT('',#44086); +#44086 = CARTESIAN_POINT('',(139.712596,-52.071793,0.)); +#44087 = SURFACE_CURVE('',#44088,(#44092,#44099),.PCURVE_S1.); +#44088 = LINE('',#44089,#44090); +#44089 = CARTESIAN_POINT('',(139.712596,-52.071793,0.)); +#44090 = VECTOR('',#44091,1.); +#44091 = DIRECTION('',(-0.573576134984,-0.819152255308,0.)); +#44092 = PCURVE('',#40728,#44093); +#44093 = DEFINITIONAL_REPRESENTATION('',(#44094),#44098); +#44094 = LINE('',#44095,#44096); +#44095 = CARTESIAN_POINT('',(12.935895067017,37.047982313404)); +#44096 = VECTOR('',#44097,1.); +#44097 = DIRECTION('',(0.573576134984,-0.819152255308)); +#44098 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44099 = PCURVE('',#44100,#44105); +#44100 = PLANE('',#44101); +#44101 = AXIS2_PLACEMENT_3D('',#44102,#44103,#44104); +#44102 = CARTESIAN_POINT('',(139.712596,-52.071793,0.)); +#44103 = DIRECTION('',(0.819152255308,-0.573576134984,0.)); +#44104 = DIRECTION('',(-0.573576134984,-0.819152255308,0.)); +#44105 = DEFINITIONAL_REPRESENTATION('',(#44106),#44110); +#44106 = LINE('',#44107,#44108); +#44107 = CARTESIAN_POINT('',(0.,0.)); +#44108 = VECTOR('',#44109,1.); +#44109 = DIRECTION('',(1.,0.)); +#44110 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44111 = ORIENTED_EDGE('',*,*,#44112,.F.); +#44112 = EDGE_CURVE('',#44113,#44085,#44115,.T.); +#44113 = VERTEX_POINT('',#44114); +#44114 = CARTESIAN_POINT('',(139.812047,-51.85852,0.)); +#44115 = SURFACE_CURVE('',#44116,(#44120,#44127),.PCURVE_S1.); +#44116 = LINE('',#44117,#44118); +#44117 = CARTESIAN_POINT('',(139.812047,-51.85852,0.)); +#44118 = VECTOR('',#44119,1.); +#44119 = DIRECTION('',(-0.422618844039,-0.906307515506,0.)); +#44120 = PCURVE('',#40728,#44121); +#44121 = DEFINITIONAL_REPRESENTATION('',(#44122),#44126); +#44122 = LINE('',#44123,#44124); +#44123 = CARTESIAN_POINT('',(12.836444067017,37.261255313404)); +#44124 = VECTOR('',#44125,1.); +#44125 = DIRECTION('',(0.422618844039,-0.906307515506)); +#44126 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44127 = PCURVE('',#44128,#44133); +#44128 = PLANE('',#44129); +#44129 = AXIS2_PLACEMENT_3D('',#44130,#44131,#44132); +#44130 = CARTESIAN_POINT('',(139.812047,-51.85852,0.)); +#44131 = DIRECTION('',(0.906307515506,-0.422618844039,0.)); +#44132 = DIRECTION('',(-0.422618844039,-0.906307515506,0.)); +#44133 = DEFINITIONAL_REPRESENTATION('',(#44134),#44138); +#44134 = LINE('',#44135,#44136); +#44135 = CARTESIAN_POINT('',(0.,0.)); +#44136 = VECTOR('',#44137,1.); +#44137 = DIRECTION('',(1.,0.)); +#44138 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44139 = ORIENTED_EDGE('',*,*,#44140,.F.); +#44140 = EDGE_CURVE('',#44141,#44113,#44143,.T.); +#44141 = VERTEX_POINT('',#44142); +#44142 = CARTESIAN_POINT('',(139.872952,-51.631218,0.)); +#44143 = SURFACE_CURVE('',#44144,(#44148,#44155),.PCURVE_S1.); +#44144 = LINE('',#44145,#44146); +#44145 = CARTESIAN_POINT('',(139.872952,-51.631218,0.)); +#44146 = VECTOR('',#44147,1.); +#44147 = DIRECTION('',(-0.25881750936,-0.965926237789,0.)); +#44148 = PCURVE('',#40728,#44149); +#44149 = DEFINITIONAL_REPRESENTATION('',(#44150),#44154); +#44150 = LINE('',#44151,#44152); +#44151 = CARTESIAN_POINT('',(12.775539067017,37.488557313404)); +#44152 = VECTOR('',#44153,1.); +#44153 = DIRECTION('',(0.25881750936,-0.965926237789)); +#44154 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44155 = PCURVE('',#44156,#44161); +#44156 = PLANE('',#44157); +#44157 = AXIS2_PLACEMENT_3D('',#44158,#44159,#44160); +#44158 = CARTESIAN_POINT('',(139.872952,-51.631218,0.)); +#44159 = DIRECTION('',(0.965926237789,-0.25881750936,0.)); +#44160 = DIRECTION('',(-0.25881750936,-0.965926237789,0.)); +#44161 = DEFINITIONAL_REPRESENTATION('',(#44162),#44166); +#44162 = LINE('',#44163,#44164); +#44163 = CARTESIAN_POINT('',(0.,0.)); +#44164 = VECTOR('',#44165,1.); +#44165 = DIRECTION('',(1.,0.)); +#44166 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44167 = ORIENTED_EDGE('',*,*,#44168,.F.); +#44168 = EDGE_CURVE('',#44169,#44141,#44171,.T.); +#44169 = VERTEX_POINT('',#44170); +#44170 = CARTESIAN_POINT('',(139.893462,-51.396793,0.)); +#44171 = SURFACE_CURVE('',#44172,(#44176,#44183),.PCURVE_S1.); +#44172 = LINE('',#44173,#44174); +#44173 = CARTESIAN_POINT('',(139.893462,-51.396793,0.)); +#44174 = VECTOR('',#44175,1.); +#44175 = DIRECTION('',(-8.715772507518E-02,-0.996194524659,0.)); +#44176 = PCURVE('',#40728,#44177); +#44177 = DEFINITIONAL_REPRESENTATION('',(#44178),#44182); +#44178 = LINE('',#44179,#44180); +#44179 = CARTESIAN_POINT('',(12.755029067017,37.722982313404)); +#44180 = VECTOR('',#44181,1.); +#44181 = DIRECTION('',(8.715772507518E-02,-0.996194524659)); +#44182 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44183 = PCURVE('',#44184,#44189); +#44184 = PLANE('',#44185); +#44185 = AXIS2_PLACEMENT_3D('',#44186,#44187,#44188); +#44186 = CARTESIAN_POINT('',(139.893462,-51.396793,0.)); +#44187 = DIRECTION('',(0.996194524659,-8.715772507518E-02,0.)); +#44188 = DIRECTION('',(-8.715772507518E-02,-0.996194524659,0.)); +#44189 = DEFINITIONAL_REPRESENTATION('',(#44190),#44194); +#44190 = LINE('',#44191,#44192); +#44191 = CARTESIAN_POINT('',(0.,0.)); +#44192 = VECTOR('',#44193,1.); +#44193 = DIRECTION('',(1.,0.)); +#44194 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44195 = ORIENTED_EDGE('',*,*,#44196,.F.); +#44196 = EDGE_CURVE('',#44197,#44169,#44199,.T.); +#44197 = VERTEX_POINT('',#44198); +#44198 = CARTESIAN_POINT('',(139.872952,-51.162368,0.)); +#44199 = SURFACE_CURVE('',#44200,(#44204,#44211),.PCURVE_S1.); +#44200 = LINE('',#44201,#44202); +#44201 = CARTESIAN_POINT('',(139.872952,-51.162368,0.)); +#44202 = VECTOR('',#44203,1.); +#44203 = DIRECTION('',(8.715772507518E-02,-0.996194524659,0.)); +#44204 = PCURVE('',#40728,#44205); +#44205 = DEFINITIONAL_REPRESENTATION('',(#44206),#44210); +#44206 = LINE('',#44207,#44208); +#44207 = CARTESIAN_POINT('',(12.775539067017,37.957407313404)); +#44208 = VECTOR('',#44209,1.); +#44209 = DIRECTION('',(-8.715772507518E-02,-0.996194524659)); +#44210 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44211 = PCURVE('',#44212,#44217); +#44212 = PLANE('',#44213); +#44213 = AXIS2_PLACEMENT_3D('',#44214,#44215,#44216); +#44214 = CARTESIAN_POINT('',(139.872952,-51.162368,0.)); +#44215 = DIRECTION('',(0.996194524659,8.715772507518E-02,-0.)); +#44216 = DIRECTION('',(8.715772507518E-02,-0.996194524659,0.)); +#44217 = DEFINITIONAL_REPRESENTATION('',(#44218),#44222); +#44218 = LINE('',#44219,#44220); +#44219 = CARTESIAN_POINT('',(0.,0.)); +#44220 = VECTOR('',#44221,1.); +#44221 = DIRECTION('',(1.,0.)); +#44222 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44223 = ORIENTED_EDGE('',*,*,#44224,.F.); +#44224 = EDGE_CURVE('',#44225,#44197,#44227,.T.); +#44225 = VERTEX_POINT('',#44226); +#44226 = CARTESIAN_POINT('',(139.812047,-50.935066,0.)); +#44227 = SURFACE_CURVE('',#44228,(#44232,#44239),.PCURVE_S1.); +#44228 = LINE('',#44229,#44230); +#44229 = CARTESIAN_POINT('',(139.812047,-50.935066,0.)); +#44230 = VECTOR('',#44231,1.); +#44231 = DIRECTION('',(0.25881750936,-0.965926237789,0.)); +#44232 = PCURVE('',#40728,#44233); +#44233 = DEFINITIONAL_REPRESENTATION('',(#44234),#44238); +#44234 = LINE('',#44235,#44236); +#44235 = CARTESIAN_POINT('',(12.836444067017,38.184709313404)); +#44236 = VECTOR('',#44237,1.); +#44237 = DIRECTION('',(-0.25881750936,-0.965926237789)); +#44238 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44239 = PCURVE('',#44240,#44245); +#44240 = PLANE('',#44241); +#44241 = AXIS2_PLACEMENT_3D('',#44242,#44243,#44244); +#44242 = CARTESIAN_POINT('',(139.812047,-50.935066,0.)); +#44243 = DIRECTION('',(0.965926237789,0.25881750936,-0.)); +#44244 = DIRECTION('',(0.25881750936,-0.965926237789,0.)); +#44245 = DEFINITIONAL_REPRESENTATION('',(#44246),#44250); +#44246 = LINE('',#44247,#44248); +#44247 = CARTESIAN_POINT('',(0.,0.)); +#44248 = VECTOR('',#44249,1.); +#44249 = DIRECTION('',(1.,0.)); +#44250 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44251 = ORIENTED_EDGE('',*,*,#44252,.F.); +#44252 = EDGE_CURVE('',#44253,#44225,#44255,.T.); +#44253 = VERTEX_POINT('',#44254); +#44254 = CARTESIAN_POINT('',(139.712596,-50.721793,0.)); +#44255 = SURFACE_CURVE('',#44256,(#44260,#44267),.PCURVE_S1.); +#44256 = LINE('',#44257,#44258); +#44257 = CARTESIAN_POINT('',(139.712596,-50.721793,0.)); +#44258 = VECTOR('',#44259,1.); +#44259 = DIRECTION('',(0.422618844039,-0.906307515506,0.)); +#44260 = PCURVE('',#40728,#44261); +#44261 = DEFINITIONAL_REPRESENTATION('',(#44262),#44266); +#44262 = LINE('',#44263,#44264); +#44263 = CARTESIAN_POINT('',(12.935895067017,38.397982313404)); +#44264 = VECTOR('',#44265,1.); +#44265 = DIRECTION('',(-0.422618844039,-0.906307515506)); +#44266 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44267 = PCURVE('',#44268,#44273); +#44268 = PLANE('',#44269); +#44269 = AXIS2_PLACEMENT_3D('',#44270,#44271,#44272); +#44270 = CARTESIAN_POINT('',(139.712596,-50.721793,0.)); +#44271 = DIRECTION('',(0.906307515506,0.422618844039,-0.)); +#44272 = DIRECTION('',(0.422618844039,-0.906307515506,0.)); +#44273 = DEFINITIONAL_REPRESENTATION('',(#44274),#44278); +#44274 = LINE('',#44275,#44276); +#44275 = CARTESIAN_POINT('',(0.,0.)); +#44276 = VECTOR('',#44277,1.); +#44277 = DIRECTION('',(1.,0.)); +#44278 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44279 = ORIENTED_EDGE('',*,*,#44280,.F.); +#44280 = EDGE_CURVE('',#44281,#44253,#44283,.T.); +#44281 = VERTEX_POINT('',#44282); +#44282 = CARTESIAN_POINT('',(139.577622,-50.52903,0.)); +#44283 = SURFACE_CURVE('',#44284,(#44288,#44295),.PCURVE_S1.); +#44284 = LINE('',#44285,#44286); +#44285 = CARTESIAN_POINT('',(139.577622,-50.52903,0.)); +#44286 = VECTOR('',#44287,1.); +#44287 = DIRECTION('',(0.573576134984,-0.819152255308,0.)); +#44288 = PCURVE('',#40728,#44289); +#44289 = DEFINITIONAL_REPRESENTATION('',(#44290),#44294); +#44290 = LINE('',#44291,#44292); +#44291 = CARTESIAN_POINT('',(13.070869067017,38.590745313404)); +#44292 = VECTOR('',#44293,1.); +#44293 = DIRECTION('',(-0.573576134984,-0.819152255308)); +#44294 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44295 = PCURVE('',#44296,#44301); +#44296 = PLANE('',#44297); +#44297 = AXIS2_PLACEMENT_3D('',#44298,#44299,#44300); +#44298 = CARTESIAN_POINT('',(139.577622,-50.52903,0.)); +#44299 = DIRECTION('',(0.819152255308,0.573576134984,-0.)); +#44300 = DIRECTION('',(0.573576134984,-0.819152255308,0.)); +#44301 = DEFINITIONAL_REPRESENTATION('',(#44302),#44306); +#44302 = LINE('',#44303,#44304); +#44303 = CARTESIAN_POINT('',(0.,0.)); +#44304 = VECTOR('',#44305,1.); +#44305 = DIRECTION('',(1.,0.)); +#44306 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44307 = ORIENTED_EDGE('',*,*,#44308,.F.); +#44308 = EDGE_CURVE('',#44309,#44281,#44311,.T.); +#44309 = VERTEX_POINT('',#44310); +#44310 = CARTESIAN_POINT('',(139.411225,-50.362633,0.)); +#44311 = SURFACE_CURVE('',#44312,(#44316,#44323),.PCURVE_S1.); +#44312 = LINE('',#44313,#44314); +#44313 = CARTESIAN_POINT('',(139.411225,-50.362633,0.)); +#44314 = VECTOR('',#44315,1.); +#44315 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#44316 = PCURVE('',#40728,#44317); +#44317 = DEFINITIONAL_REPRESENTATION('',(#44318),#44322); +#44318 = LINE('',#44319,#44320); +#44319 = CARTESIAN_POINT('',(13.237266067017,38.757142313404)); +#44320 = VECTOR('',#44321,1.); +#44321 = DIRECTION('',(-0.707106781187,-0.707106781187)); +#44322 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44323 = PCURVE('',#44324,#44329); +#44324 = PLANE('',#44325); +#44325 = AXIS2_PLACEMENT_3D('',#44326,#44327,#44328); +#44326 = CARTESIAN_POINT('',(139.411225,-50.362633,0.)); +#44327 = DIRECTION('',(0.707106781187,0.707106781187,-0.)); +#44328 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#44329 = DEFINITIONAL_REPRESENTATION('',(#44330),#44334); +#44330 = LINE('',#44331,#44332); +#44331 = CARTESIAN_POINT('',(0.,0.)); +#44332 = VECTOR('',#44333,1.); +#44333 = DIRECTION('',(1.,0.)); +#44334 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44335 = ORIENTED_EDGE('',*,*,#44336,.F.); +#44336 = EDGE_CURVE('',#44337,#44309,#44339,.T.); +#44337 = VERTEX_POINT('',#44338); +#44338 = CARTESIAN_POINT('',(139.218462,-50.227659,0.)); +#44339 = SURFACE_CURVE('',#44340,(#44344,#44351),.PCURVE_S1.); +#44340 = LINE('',#44341,#44342); +#44341 = CARTESIAN_POINT('',(139.218462,-50.227659,0.)); +#44342 = VECTOR('',#44343,1.); +#44343 = DIRECTION('',(0.819152255308,-0.573576134984,0.)); +#44344 = PCURVE('',#40728,#44345); +#44345 = DEFINITIONAL_REPRESENTATION('',(#44346),#44350); +#44346 = LINE('',#44347,#44348); +#44347 = CARTESIAN_POINT('',(13.430029067017,38.892116313404)); +#44348 = VECTOR('',#44349,1.); +#44349 = DIRECTION('',(-0.819152255308,-0.573576134984)); +#44350 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44351 = PCURVE('',#44352,#44357); +#44352 = PLANE('',#44353); +#44353 = AXIS2_PLACEMENT_3D('',#44354,#44355,#44356); +#44354 = CARTESIAN_POINT('',(139.218462,-50.227659,0.)); +#44355 = DIRECTION('',(0.573576134984,0.819152255308,-0.)); +#44356 = DIRECTION('',(0.819152255308,-0.573576134984,0.)); +#44357 = DEFINITIONAL_REPRESENTATION('',(#44358),#44362); +#44358 = LINE('',#44359,#44360); +#44359 = CARTESIAN_POINT('',(0.,0.)); +#44360 = VECTOR('',#44361,1.); +#44361 = DIRECTION('',(1.,0.)); +#44362 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44363 = ORIENTED_EDGE('',*,*,#44364,.F.); +#44364 = EDGE_CURVE('',#43329,#44337,#44365,.T.); +#44365 = SURFACE_CURVE('',#44366,(#44370,#44377),.PCURVE_S1.); +#44366 = LINE('',#44367,#44368); +#44367 = CARTESIAN_POINT('',(139.005189,-50.128208,0.)); +#44368 = VECTOR('',#44369,1.); +#44369 = DIRECTION('',(0.906307515506,-0.422618844039,0.)); +#44370 = PCURVE('',#40728,#44371); +#44371 = DEFINITIONAL_REPRESENTATION('',(#44372),#44376); +#44372 = LINE('',#44373,#44374); +#44373 = CARTESIAN_POINT('',(13.643302067017,38.991567313404)); +#44374 = VECTOR('',#44375,1.); +#44375 = DIRECTION('',(-0.906307515506,-0.422618844039)); +#44376 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44377 = PCURVE('',#44378,#44383); +#44378 = PLANE('',#44379); +#44379 = AXIS2_PLACEMENT_3D('',#44380,#44381,#44382); +#44380 = CARTESIAN_POINT('',(139.005189,-50.128208,0.)); +#44381 = DIRECTION('',(0.422618844039,0.906307515506,-0.)); +#44382 = DIRECTION('',(0.906307515506,-0.422618844039,0.)); +#44383 = DEFINITIONAL_REPRESENTATION('',(#44384),#44388); +#44384 = LINE('',#44385,#44386); +#44385 = CARTESIAN_POINT('',(0.,0.)); +#44386 = VECTOR('',#44387,1.); +#44387 = DIRECTION('',(1.,0.)); +#44388 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44389 = ADVANCED_FACE('',(#44390,#45520,#46396),#40674,.F.); +#44390 = FACE_BOUND('',#44391,.F.); +#44391 = EDGE_LOOP('',(#44392,#44393,#44394,#44417,#44440,#44463,#44486, + #44509,#44532,#44555,#44578,#44601,#44624,#44647,#44670,#44693, + #44716,#44739,#44762,#44785,#44808,#44831,#44854,#44877,#44900, + #44923,#44946,#44969,#44992,#45015,#45038,#45061,#45084,#45107, + #45130,#45153,#45176,#45199,#45222,#45245,#45268,#45291,#45314, + #45337,#45360,#45383,#45406,#45429,#45452,#45475,#45498,#45519)); +#44392 = ORIENTED_EDGE('',*,*,#40658,.T.); +#44393 = ORIENTED_EDGE('',*,*,#40820,.T.); +#44394 = ORIENTED_EDGE('',*,*,#44395,.T.); +#44395 = EDGE_CURVE('',#40821,#44396,#44398,.T.); +#44396 = VERTEX_POINT('',#44397); +#44397 = CARTESIAN_POINT('',(172.636756,-48.395392,1.58)); +#44398 = SURFACE_CURVE('',#44399,(#44403,#44410),.PCURVE_S1.); +#44399 = LINE('',#44400,#44401); +#44400 = CARTESIAN_POINT('',(172.454512,-48.267783,1.58)); +#44401 = VECTOR('',#44402,1.); +#44402 = DIRECTION('',(0.819151247256,-0.573577574631,0.)); +#44403 = PCURVE('',#40674,#44404); +#44404 = DEFINITIONAL_REPRESENTATION('',(#44405),#44409); +#44405 = LINE('',#44406,#44407); +#44406 = CARTESIAN_POINT('',(-19.80602093298,40.851992313404)); +#44407 = VECTOR('',#44408,1.); +#44408 = DIRECTION('',(-0.819151247256,-0.573577574631)); +#44409 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44410 = PCURVE('',#40859,#44411); +#44411 = DEFINITIONAL_REPRESENTATION('',(#44412),#44416); +#44412 = LINE('',#44413,#44414); +#44413 = CARTESIAN_POINT('',(0.,-1.58)); +#44414 = VECTOR('',#44415,1.); +#44415 = DIRECTION('',(1.,0.)); +#44416 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44417 = ORIENTED_EDGE('',*,*,#44418,.T.); +#44418 = EDGE_CURVE('',#44396,#44419,#44421,.T.); +#44419 = VERTEX_POINT('',#44420); +#44420 = CARTESIAN_POINT('',(172.794071,-48.552709,1.58)); +#44421 = SURFACE_CURVE('',#44422,(#44426,#44433),.PCURVE_S1.); +#44422 = LINE('',#44423,#44424); +#44423 = CARTESIAN_POINT('',(172.636756,-48.395392,1.58)); +#44424 = VECTOR('',#44425,1.); +#44425 = DIRECTION('',(0.707102286354,-0.70711127599,0.)); +#44426 = PCURVE('',#40674,#44427); +#44427 = DEFINITIONAL_REPRESENTATION('',(#44428),#44432); +#44428 = LINE('',#44429,#44430); +#44429 = CARTESIAN_POINT('',(-19.98826493298,40.724383313404)); +#44430 = VECTOR('',#44431,1.); +#44431 = DIRECTION('',(-0.707102286354,-0.70711127599)); +#44432 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44433 = PCURVE('',#40936,#44434); +#44434 = DEFINITIONAL_REPRESENTATION('',(#44435),#44439); +#44435 = LINE('',#44436,#44437); +#44436 = CARTESIAN_POINT('',(0.,-1.58)); +#44437 = VECTOR('',#44438,1.); +#44438 = DIRECTION('',(1.,0.)); +#44439 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44440 = ORIENTED_EDGE('',*,*,#44441,.T.); +#44441 = EDGE_CURVE('',#44419,#44442,#44444,.T.); +#44442 = VERTEX_POINT('',#44443); +#44443 = CARTESIAN_POINT('',(172.921679,-48.734954,1.58)); +#44444 = SURFACE_CURVE('',#44445,(#44449,#44456),.PCURVE_S1.); +#44445 = LINE('',#44446,#44447); +#44446 = CARTESIAN_POINT('',(172.794071,-48.552709,1.58)); +#44447 = VECTOR('',#44448,1.); +#44448 = DIRECTION('',(0.573572446702,-0.819154837857,0.)); +#44449 = PCURVE('',#40674,#44450); +#44450 = DEFINITIONAL_REPRESENTATION('',(#44451),#44455); +#44451 = LINE('',#44452,#44453); +#44452 = CARTESIAN_POINT('',(-20.14557993298,40.567066313404)); +#44453 = VECTOR('',#44454,1.); +#44454 = DIRECTION('',(-0.573572446702,-0.819154837857)); +#44455 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44456 = PCURVE('',#40964,#44457); +#44457 = DEFINITIONAL_REPRESENTATION('',(#44458),#44462); +#44458 = LINE('',#44459,#44460); +#44459 = CARTESIAN_POINT('',(0.,-1.58)); +#44460 = VECTOR('',#44461,1.); +#44461 = DIRECTION('',(1.,0.)); +#44462 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44463 = ORIENTED_EDGE('',*,*,#44464,.T.); +#44464 = EDGE_CURVE('',#44442,#44465,#44467,.T.); +#44465 = VERTEX_POINT('',#44466); +#44466 = CARTESIAN_POINT('',(173.015701,-48.936589,1.58)); +#44467 = SURFACE_CURVE('',#44468,(#44472,#44479),.PCURVE_S1.); +#44468 = LINE('',#44469,#44470); +#44469 = CARTESIAN_POINT('',(172.921679,-48.734954,1.58)); +#44470 = VECTOR('',#44471,1.); +#44471 = DIRECTION('',(0.422611082053,-0.906311134945,0.)); +#44472 = PCURVE('',#40674,#44473); +#44473 = DEFINITIONAL_REPRESENTATION('',(#44474),#44478); +#44474 = LINE('',#44475,#44476); +#44475 = CARTESIAN_POINT('',(-20.27318793298,40.384821313404)); +#44476 = VECTOR('',#44477,1.); +#44477 = DIRECTION('',(-0.422611082053,-0.906311134945)); +#44478 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44479 = PCURVE('',#40992,#44480); +#44480 = DEFINITIONAL_REPRESENTATION('',(#44481),#44485); +#44481 = LINE('',#44482,#44483); +#44482 = CARTESIAN_POINT('',(0.,-1.58)); +#44483 = VECTOR('',#44484,1.); +#44484 = DIRECTION('',(1.,0.)); +#44485 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44486 = ORIENTED_EDGE('',*,*,#44487,.T.); +#44487 = EDGE_CURVE('',#44465,#44488,#44490,.T.); +#44488 = VERTEX_POINT('',#44489); +#44489 = CARTESIAN_POINT('',(173.073282,-49.151488,1.58)); +#44490 = SURFACE_CURVE('',#44491,(#44495,#44502),.PCURVE_S1.); +#44491 = LINE('',#44492,#44493); +#44492 = CARTESIAN_POINT('',(173.015701,-48.936589,1.58)); +#44493 = VECTOR('',#44494,1.); +#44494 = DIRECTION('',(0.258814794766,-0.965926965153,0.)); +#44495 = PCURVE('',#40674,#44496); +#44496 = DEFINITIONAL_REPRESENTATION('',(#44497),#44501); +#44497 = LINE('',#44498,#44499); +#44498 = CARTESIAN_POINT('',(-20.36720993298,40.183186313404)); +#44499 = VECTOR('',#44500,1.); +#44500 = DIRECTION('',(-0.258814794766,-0.965926965153)); +#44501 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44502 = PCURVE('',#41020,#44503); +#44503 = DEFINITIONAL_REPRESENTATION('',(#44504),#44508); +#44504 = LINE('',#44505,#44506); +#44505 = CARTESIAN_POINT('',(0.,-1.58)); +#44506 = VECTOR('',#44507,1.); +#44507 = DIRECTION('',(1.,0.)); +#44508 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44509 = ORIENTED_EDGE('',*,*,#44510,.T.); +#44510 = EDGE_CURVE('',#44488,#44511,#44513,.T.); +#44511 = VERTEX_POINT('',#44512); +#44512 = CARTESIAN_POINT('',(173.092682,-49.37312,1.58)); +#44513 = SURFACE_CURVE('',#44514,(#44518,#44525),.PCURVE_S1.); +#44514 = LINE('',#44515,#44516); +#44515 = CARTESIAN_POINT('',(173.073282,-49.151488,1.58)); +#44516 = VECTOR('',#44517,1.); +#44517 = DIRECTION('',(8.719906688277E-02,-0.996190906772,0.)); +#44518 = PCURVE('',#40674,#44519); +#44519 = DEFINITIONAL_REPRESENTATION('',(#44520),#44524); +#44520 = LINE('',#44521,#44522); +#44521 = CARTESIAN_POINT('',(-20.42479093298,39.968287313404)); +#44522 = VECTOR('',#44523,1.); +#44523 = DIRECTION('',(-8.719906688277E-02,-0.996190906772)); +#44524 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44525 = PCURVE('',#41048,#44526); +#44526 = DEFINITIONAL_REPRESENTATION('',(#44527),#44531); +#44527 = LINE('',#44528,#44529); +#44528 = CARTESIAN_POINT('',(0.,-1.58)); +#44529 = VECTOR('',#44530,1.); +#44530 = DIRECTION('',(1.,0.)); +#44531 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44532 = ORIENTED_EDGE('',*,*,#44533,.T.); +#44533 = EDGE_CURVE('',#44511,#44534,#44536,.T.); +#44534 = VERTEX_POINT('',#44535); +#44535 = CARTESIAN_POINT('',(169.735462,-130.140562,1.58)); +#44536 = SURFACE_CURVE('',#44537,(#44541,#44548),.PCURVE_S1.); +#44537 = LINE('',#44538,#44539); +#44538 = CARTESIAN_POINT('',(173.092682,-49.37312,1.58)); +#44539 = VECTOR('',#44540,1.); +#44540 = DIRECTION('',(-4.153063921532E-02,-0.999137230818,0.)); +#44541 = PCURVE('',#40674,#44542); +#44542 = DEFINITIONAL_REPRESENTATION('',(#44543),#44547); +#44543 = LINE('',#44544,#44545); +#44544 = CARTESIAN_POINT('',(-20.44419093298,39.746655313404)); +#44545 = VECTOR('',#44546,1.); +#44546 = DIRECTION('',(4.153063921532E-02,-0.999137230818)); +#44547 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44548 = PCURVE('',#41076,#44549); +#44549 = DEFINITIONAL_REPRESENTATION('',(#44550),#44554); +#44550 = LINE('',#44551,#44552); +#44551 = CARTESIAN_POINT('',(0.,-1.58)); +#44552 = VECTOR('',#44553,1.); +#44553 = DIRECTION('',(1.,0.)); +#44554 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44555 = ORIENTED_EDGE('',*,*,#44556,.T.); +#44556 = EDGE_CURVE('',#44534,#44557,#44559,.T.); +#44557 = VERTEX_POINT('',#44558); +#44558 = CARTESIAN_POINT('',(169.643462,-130.140562,1.58)); +#44559 = SURFACE_CURVE('',#44560,(#44564,#44571),.PCURVE_S1.); +#44560 = LINE('',#44561,#44562); +#44561 = CARTESIAN_POINT('',(169.735462,-130.140562,1.58)); +#44562 = VECTOR('',#44563,1.); +#44563 = DIRECTION('',(-1.,0.,0.)); +#44564 = PCURVE('',#40674,#44565); +#44565 = DEFINITIONAL_REPRESENTATION('',(#44566),#44570); +#44566 = LINE('',#44567,#44568); +#44567 = CARTESIAN_POINT('',(-17.08697093298,-41.02078668659)); +#44568 = VECTOR('',#44569,1.); +#44569 = DIRECTION('',(1.,0.)); +#44570 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44571 = PCURVE('',#41104,#44572); +#44572 = DEFINITIONAL_REPRESENTATION('',(#44573),#44577); +#44573 = LINE('',#44574,#44575); +#44574 = CARTESIAN_POINT('',(0.,-1.58)); +#44575 = VECTOR('',#44576,1.); +#44576 = DIRECTION('',(1.,0.)); +#44577 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44578 = ORIENTED_EDGE('',*,*,#44579,.T.); +#44579 = EDGE_CURVE('',#44557,#44580,#44582,.T.); +#44580 = VERTEX_POINT('',#44581); +#44581 = CARTESIAN_POINT('',(169.312467,-130.159149,1.58)); +#44582 = SURFACE_CURVE('',#44583,(#44587,#44594),.PCURVE_S1.); +#44583 = LINE('',#44584,#44585); +#44584 = CARTESIAN_POINT('',(169.643462,-130.140562,1.58)); +#44585 = VECTOR('',#44586,1.); +#44586 = DIRECTION('',(-0.998427031243,-5.606659686621E-02,0.)); +#44587 = PCURVE('',#40674,#44588); +#44588 = DEFINITIONAL_REPRESENTATION('',(#44589),#44593); +#44589 = LINE('',#44590,#44591); +#44590 = CARTESIAN_POINT('',(-16.99497093298,-41.02078668659)); +#44591 = VECTOR('',#44592,1.); +#44592 = DIRECTION('',(0.998427031243,-5.606659686621E-02)); +#44593 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44594 = PCURVE('',#41132,#44595); +#44595 = DEFINITIONAL_REPRESENTATION('',(#44596),#44600); +#44596 = LINE('',#44597,#44598); +#44597 = CARTESIAN_POINT('',(0.,-1.58)); +#44598 = VECTOR('',#44599,1.); +#44599 = DIRECTION('',(1.,0.)); +#44600 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44601 = ORIENTED_EDGE('',*,*,#44602,.T.); +#44602 = EDGE_CURVE('',#44580,#44603,#44605,.T.); +#44603 = VERTEX_POINT('',#44604); +#44604 = CARTESIAN_POINT('',(168.985635,-130.214678,1.58)); +#44605 = SURFACE_CURVE('',#44606,(#44610,#44617),.PCURVE_S1.); +#44606 = LINE('',#44607,#44608); +#44607 = CARTESIAN_POINT('',(169.312467,-130.159149,1.58)); +#44608 = VECTOR('',#44609,1.); +#44609 = DIRECTION('',(-0.985872009943,-0.16750038809,0.)); +#44610 = PCURVE('',#40674,#44611); +#44611 = DEFINITIONAL_REPRESENTATION('',(#44612),#44616); +#44612 = LINE('',#44613,#44614); +#44613 = CARTESIAN_POINT('',(-16.66397593298,-41.03937368659)); +#44614 = VECTOR('',#44615,1.); +#44615 = DIRECTION('',(0.985872009943,-0.16750038809)); +#44616 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44617 = PCURVE('',#41160,#44618); +#44618 = DEFINITIONAL_REPRESENTATION('',(#44619),#44623); +#44619 = LINE('',#44620,#44621); +#44620 = CARTESIAN_POINT('',(0.,-1.58)); +#44621 = VECTOR('',#44622,1.); +#44622 = DIRECTION('',(1.,0.)); +#44623 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44624 = ORIENTED_EDGE('',*,*,#44625,.T.); +#44625 = EDGE_CURVE('',#44603,#44626,#44628,.T.); +#44626 = VERTEX_POINT('',#44627); +#44627 = CARTESIAN_POINT('',(168.667075,-130.306452,1.58)); +#44628 = SURFACE_CURVE('',#44629,(#44633,#44640),.PCURVE_S1.); +#44629 = LINE('',#44630,#44631); +#44630 = CARTESIAN_POINT('',(168.985635,-130.214678,1.58)); +#44631 = VECTOR('',#44632,1.); +#44632 = DIRECTION('',(-0.960918569693,-0.276831180359,0.)); +#44633 = PCURVE('',#40674,#44634); +#44634 = DEFINITIONAL_REPRESENTATION('',(#44635),#44639); +#44635 = LINE('',#44636,#44637); +#44636 = CARTESIAN_POINT('',(-16.33714393298,-41.09490268659)); +#44637 = VECTOR('',#44638,1.); +#44638 = DIRECTION('',(0.960918569693,-0.276831180359)); +#44639 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44640 = PCURVE('',#41188,#44641); +#44641 = DEFINITIONAL_REPRESENTATION('',(#44642),#44646); +#44642 = LINE('',#44643,#44644); +#44643 = CARTESIAN_POINT('',(0.,-1.58)); +#44644 = VECTOR('',#44645,1.); +#44645 = DIRECTION('',(1.,0.)); +#44646 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44647 = ORIENTED_EDGE('',*,*,#44648,.T.); +#44648 = EDGE_CURVE('',#44626,#44649,#44651,.T.); +#44649 = VERTEX_POINT('',#44650); +#44650 = CARTESIAN_POINT('',(168.360793,-130.433316,1.58)); +#44651 = SURFACE_CURVE('',#44652,(#44656,#44663),.PCURVE_S1.); +#44652 = LINE('',#44653,#44654); +#44653 = CARTESIAN_POINT('',(168.667075,-130.306452,1.58)); +#44654 = VECTOR('',#44655,1.); +#44655 = DIRECTION('',(-0.923881834275,-0.382677875368,0.)); +#44656 = PCURVE('',#40674,#44657); +#44657 = DEFINITIONAL_REPRESENTATION('',(#44658),#44662); +#44658 = LINE('',#44659,#44660); +#44659 = CARTESIAN_POINT('',(-16.01858393298,-41.18667668659)); +#44660 = VECTOR('',#44661,1.); +#44661 = DIRECTION('',(0.923881834275,-0.382677875368)); +#44662 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44663 = PCURVE('',#41216,#44664); +#44664 = DEFINITIONAL_REPRESENTATION('',(#44665),#44669); +#44665 = LINE('',#44666,#44667); +#44666 = CARTESIAN_POINT('',(0.,-1.58)); +#44667 = VECTOR('',#44668,1.); +#44668 = DIRECTION('',(1.,0.)); +#44669 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44670 = ORIENTED_EDGE('',*,*,#44671,.T.); +#44671 = EDGE_CURVE('',#44649,#44672,#44674,.T.); +#44672 = VERTEX_POINT('',#44673); +#44673 = CARTESIAN_POINT('',(168.070642,-130.593675,1.58)); +#44674 = SURFACE_CURVE('',#44675,(#44679,#44686),.PCURVE_S1.); +#44675 = LINE('',#44676,#44677); +#44676 = CARTESIAN_POINT('',(168.360793,-130.433316,1.58)); +#44677 = VECTOR('',#44678,1.); +#44678 = DIRECTION('',(-0.875225707014,-0.483714752495,0.)); +#44679 = PCURVE('',#40674,#44680); +#44680 = DEFINITIONAL_REPRESENTATION('',(#44681),#44685); +#44681 = LINE('',#44682,#44683); +#44682 = CARTESIAN_POINT('',(-15.71230193298,-41.31354068659)); +#44683 = VECTOR('',#44684,1.); +#44684 = DIRECTION('',(0.875225707014,-0.483714752495)); +#44685 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44686 = PCURVE('',#41244,#44687); +#44687 = DEFINITIONAL_REPRESENTATION('',(#44688),#44692); +#44688 = LINE('',#44689,#44690); +#44689 = CARTESIAN_POINT('',(0.,-1.58)); +#44690 = VECTOR('',#44691,1.); +#44691 = DIRECTION('',(1.,0.)); +#44692 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44693 = ORIENTED_EDGE('',*,*,#44694,.T.); +#44694 = EDGE_CURVE('',#44672,#44695,#44697,.T.); +#44695 = VERTEX_POINT('',#44696); +#44696 = CARTESIAN_POINT('',(167.800269,-130.785512,1.58)); +#44697 = SURFACE_CURVE('',#44698,(#44702,#44709),.PCURVE_S1.); +#44698 = LINE('',#44699,#44700); +#44699 = CARTESIAN_POINT('',(168.070642,-130.593675,1.58)); +#44700 = VECTOR('',#44701,1.); +#44701 = DIRECTION('',(-0.815564960361,-0.578665529845,0.)); +#44702 = PCURVE('',#40674,#44703); +#44703 = DEFINITIONAL_REPRESENTATION('',(#44704),#44708); +#44704 = LINE('',#44705,#44706); +#44705 = CARTESIAN_POINT('',(-15.42215093298,-41.47389968659)); +#44706 = VECTOR('',#44707,1.); +#44707 = DIRECTION('',(0.815564960361,-0.578665529845)); +#44708 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44709 = PCURVE('',#41272,#44710); +#44710 = DEFINITIONAL_REPRESENTATION('',(#44711),#44715); +#44711 = LINE('',#44712,#44713); +#44712 = CARTESIAN_POINT('',(0.,-1.58)); +#44713 = VECTOR('',#44714,1.); +#44714 = DIRECTION('',(1.,0.)); +#44715 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44716 = ORIENTED_EDGE('',*,*,#44717,.T.); +#44717 = EDGE_CURVE('',#44695,#44718,#44720,.T.); +#44718 = VERTEX_POINT('',#44719); +#44719 = CARTESIAN_POINT('',(167.553076,-131.006416,1.58)); +#44720 = SURFACE_CURVE('',#44721,(#44725,#44732),.PCURVE_S1.); +#44721 = LINE('',#44722,#44723); +#44722 = CARTESIAN_POINT('',(167.800269,-130.785512,1.58)); +#44723 = VECTOR('',#44724,1.); +#44724 = DIRECTION('',(-0.745643919311,-0.666344614741,0.)); +#44725 = PCURVE('',#40674,#44726); +#44726 = DEFINITIONAL_REPRESENTATION('',(#44727),#44731); +#44727 = LINE('',#44728,#44729); +#44728 = CARTESIAN_POINT('',(-15.15177793298,-41.66573668659)); +#44729 = VECTOR('',#44730,1.); +#44730 = DIRECTION('',(0.745643919311,-0.666344614741)); +#44731 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44732 = PCURVE('',#41300,#44733); +#44733 = DEFINITIONAL_REPRESENTATION('',(#44734),#44738); +#44734 = LINE('',#44735,#44736); +#44735 = CARTESIAN_POINT('',(0.,-1.58)); +#44736 = VECTOR('',#44737,1.); +#44737 = DIRECTION('',(1.,0.)); +#44738 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44739 = ORIENTED_EDGE('',*,*,#44740,.T.); +#44740 = EDGE_CURVE('',#44718,#44741,#44743,.T.); +#44741 = VERTEX_POINT('',#44742); +#44742 = CARTESIAN_POINT('',(167.33217,-131.253607,1.58)); +#44743 = SURFACE_CURVE('',#44744,(#44748,#44755),.PCURVE_S1.); +#44744 = LINE('',#44745,#44746); +#44745 = CARTESIAN_POINT('',(167.553076,-131.006416,1.58)); +#44746 = VECTOR('',#44747,1.); +#44747 = DIRECTION('',(-0.66635096639,-0.745638243112,0.)); +#44748 = PCURVE('',#40674,#44749); +#44749 = DEFINITIONAL_REPRESENTATION('',(#44750),#44754); +#44750 = LINE('',#44751,#44752); +#44751 = CARTESIAN_POINT('',(-14.90458493298,-41.88664068659)); +#44752 = VECTOR('',#44753,1.); +#44753 = DIRECTION('',(0.66635096639,-0.745638243112)); +#44754 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44755 = PCURVE('',#41328,#44756); +#44756 = DEFINITIONAL_REPRESENTATION('',(#44757),#44761); +#44757 = LINE('',#44758,#44759); +#44758 = CARTESIAN_POINT('',(0.,-1.58)); +#44759 = VECTOR('',#44760,1.); +#44760 = DIRECTION('',(1.,0.)); +#44761 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44762 = ORIENTED_EDGE('',*,*,#44763,.T.); +#44763 = EDGE_CURVE('',#44741,#44764,#44766,.T.); +#44764 = VERTEX_POINT('',#44765); +#44765 = CARTESIAN_POINT('',(167.140329,-131.523978,1.58)); +#44766 = SURFACE_CURVE('',#44767,(#44771,#44778),.PCURVE_S1.); +#44767 = LINE('',#44768,#44769); +#44768 = CARTESIAN_POINT('',(167.33217,-131.253607,1.58)); +#44769 = VECTOR('',#44770,1.); +#44770 = DIRECTION('',(-0.578676402433,-0.815557245856,0.)); +#44771 = PCURVE('',#40674,#44772); +#44772 = DEFINITIONAL_REPRESENTATION('',(#44773),#44777); +#44773 = LINE('',#44774,#44775); +#44774 = CARTESIAN_POINT('',(-14.68367893298,-42.13383168659)); +#44775 = VECTOR('',#44776,1.); +#44776 = DIRECTION('',(0.578676402433,-0.815557245856)); +#44777 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44778 = PCURVE('',#41356,#44779); +#44779 = DEFINITIONAL_REPRESENTATION('',(#44780),#44784); +#44780 = LINE('',#44781,#44782); +#44781 = CARTESIAN_POINT('',(0.,-1.58)); +#44782 = VECTOR('',#44783,1.); +#44783 = DIRECTION('',(1.,0.)); +#44784 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44785 = ORIENTED_EDGE('',*,*,#44786,.T.); +#44786 = EDGE_CURVE('',#44764,#44787,#44789,.T.); +#44787 = VERTEX_POINT('',#44788); +#44788 = CARTESIAN_POINT('',(166.979967,-131.814127,1.58)); +#44789 = SURFACE_CURVE('',#44790,(#44794,#44801),.PCURVE_S1.); +#44790 = LINE('',#44791,#44792); +#44791 = CARTESIAN_POINT('',(167.140329,-131.523978,1.58)); +#44792 = VECTOR('',#44793,1.); +#44793 = DIRECTION('',(-0.483724238541,-0.875220464253,0.)); +#44794 = PCURVE('',#40674,#44795); +#44795 = DEFINITIONAL_REPRESENTATION('',(#44796),#44800); +#44796 = LINE('',#44797,#44798); +#44797 = CARTESIAN_POINT('',(-14.49183793298,-42.40420268659)); +#44798 = VECTOR('',#44799,1.); +#44799 = DIRECTION('',(0.483724238541,-0.875220464253)); +#44800 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44801 = PCURVE('',#41384,#44802); +#44802 = DEFINITIONAL_REPRESENTATION('',(#44803),#44807); +#44803 = LINE('',#44804,#44805); +#44804 = CARTESIAN_POINT('',(0.,-1.58)); +#44805 = VECTOR('',#44806,1.); +#44806 = DIRECTION('',(1.,0.)); +#44807 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44808 = ORIENTED_EDGE('',*,*,#44809,.T.); +#44809 = EDGE_CURVE('',#44787,#44810,#44812,.T.); +#44810 = VERTEX_POINT('',#44811); +#44811 = CARTESIAN_POINT('',(166.8531,-132.120408,1.58)); +#44812 = SURFACE_CURVE('',#44813,(#44817,#44824),.PCURVE_S1.); +#44813 = LINE('',#44814,#44815); +#44814 = CARTESIAN_POINT('',(166.979967,-131.814127,1.58)); +#44815 = VECTOR('',#44816,1.); +#44816 = DIRECTION('',(-0.382686665926,-0.92387819312,0.)); +#44817 = PCURVE('',#40674,#44818); +#44818 = DEFINITIONAL_REPRESENTATION('',(#44819),#44823); +#44819 = LINE('',#44820,#44821); +#44820 = CARTESIAN_POINT('',(-14.33147593298,-42.69435168659)); +#44821 = VECTOR('',#44822,1.); +#44822 = DIRECTION('',(0.382686665926,-0.92387819312)); +#44823 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44824 = PCURVE('',#41412,#44825); +#44825 = DEFINITIONAL_REPRESENTATION('',(#44826),#44830); +#44826 = LINE('',#44827,#44828); +#44827 = CARTESIAN_POINT('',(0.,-1.58)); +#44828 = VECTOR('',#44829,1.); +#44829 = DIRECTION('',(1.,0.)); +#44830 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44831 = ORIENTED_EDGE('',*,*,#44832,.T.); +#44832 = EDGE_CURVE('',#44810,#44833,#44835,.T.); +#44833 = VERTEX_POINT('',#44834); +#44834 = CARTESIAN_POINT('',(166.761323,-132.438967,1.58)); +#44835 = SURFACE_CURVE('',#44836,(#44840,#44847),.PCURVE_S1.); +#44836 = LINE('',#44837,#44838); +#44837 = CARTESIAN_POINT('',(166.8531,-132.120408,1.58)); +#44838 = VECTOR('',#44839,1.); +#44839 = DIRECTION('',(-0.276840338594,-0.960915931248,0.)); +#44840 = PCURVE('',#40674,#44841); +#44841 = DEFINITIONAL_REPRESENTATION('',(#44842),#44846); +#44842 = LINE('',#44843,#44844); +#44843 = CARTESIAN_POINT('',(-14.20460893298,-43.00063268659)); +#44844 = VECTOR('',#44845,1.); +#44845 = DIRECTION('',(0.276840338594,-0.960915931248)); +#44846 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44847 = PCURVE('',#41440,#44848); +#44848 = DEFINITIONAL_REPRESENTATION('',(#44849),#44853); +#44849 = LINE('',#44850,#44851); +#44850 = CARTESIAN_POINT('',(0.,-1.58)); +#44851 = VECTOR('',#44852,1.); +#44852 = DIRECTION('',(1.,0.)); +#44853 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44854 = ORIENTED_EDGE('',*,*,#44855,.T.); +#44855 = EDGE_CURVE('',#44833,#44856,#44858,.T.); +#44856 = VERTEX_POINT('',#44857); +#44857 = CARTESIAN_POINT('',(166.70579,-132.765799,1.58)); +#44858 = SURFACE_CURVE('',#44859,(#44863,#44870),.PCURVE_S1.); +#44859 = LINE('',#44860,#44861); +#44860 = CARTESIAN_POINT('',(166.761323,-132.438967,1.58)); +#44861 = VECTOR('',#44862,1.); +#44862 = DIRECTION('',(-0.167512115327,-0.985870017405,0.)); +#44863 = PCURVE('',#40674,#44864); +#44864 = DEFINITIONAL_REPRESENTATION('',(#44865),#44869); +#44865 = LINE('',#44866,#44867); +#44866 = CARTESIAN_POINT('',(-14.11283193298,-43.31919168659)); +#44867 = VECTOR('',#44868,1.); +#44868 = DIRECTION('',(0.167512115327,-0.985870017405)); +#44869 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44870 = PCURVE('',#41468,#44871); +#44871 = DEFINITIONAL_REPRESENTATION('',(#44872),#44876); +#44872 = LINE('',#44873,#44874); +#44873 = CARTESIAN_POINT('',(0.,-1.58)); +#44874 = VECTOR('',#44875,1.); +#44875 = DIRECTION('',(1.,0.)); +#44876 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44877 = ORIENTED_EDGE('',*,*,#44878,.T.); +#44878 = EDGE_CURVE('',#44856,#44879,#44881,.T.); +#44879 = VERTEX_POINT('',#44880); +#44880 = CARTESIAN_POINT('',(166.687231,-133.096793,1.58)); +#44881 = SURFACE_CURVE('',#44882,(#44886,#44893),.PCURVE_S1.); +#44882 = LINE('',#44883,#44884); +#44883 = CARTESIAN_POINT('',(166.70579,-132.765799,1.58)); +#44884 = VECTOR('',#44885,1.); +#44885 = DIRECTION('',(-5.598257001052E-02,-0.998431746218,0.)); +#44886 = PCURVE('',#40674,#44887); +#44887 = DEFINITIONAL_REPRESENTATION('',(#44888),#44892); +#44888 = LINE('',#44889,#44890); +#44889 = CARTESIAN_POINT('',(-14.05729893298,-43.64602368659)); +#44890 = VECTOR('',#44891,1.); +#44891 = DIRECTION('',(5.598257001052E-02,-0.998431746218)); +#44892 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44893 = PCURVE('',#41496,#44894); +#44894 = DEFINITIONAL_REPRESENTATION('',(#44895),#44899); +#44895 = LINE('',#44896,#44897); +#44896 = CARTESIAN_POINT('',(0.,-1.58)); +#44897 = VECTOR('',#44898,1.); +#44898 = DIRECTION('',(1.,0.)); +#44899 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44900 = ORIENTED_EDGE('',*,*,#44901,.T.); +#44901 = EDGE_CURVE('',#44879,#44902,#44904,.T.); +#44902 = VERTEX_POINT('',#44903); +#44903 = CARTESIAN_POINT('',(138.620462,-133.095024,1.58)); +#44904 = SURFACE_CURVE('',#44905,(#44909,#44916),.PCURVE_S1.); +#44905 = LINE('',#44906,#44907); +#44906 = CARTESIAN_POINT('',(166.687231,-133.096793,1.58)); +#44907 = VECTOR('',#44908,1.); +#44908 = DIRECTION('',(-0.999999998014,6.302827363143E-05,0.)); +#44909 = PCURVE('',#40674,#44910); +#44910 = DEFINITIONAL_REPRESENTATION('',(#44911),#44915); +#44911 = LINE('',#44912,#44913); +#44912 = CARTESIAN_POINT('',(-14.03873993298,-43.97701768659)); +#44913 = VECTOR('',#44914,1.); +#44914 = DIRECTION('',(0.999999998014,6.302827363143E-05)); +#44915 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44916 = PCURVE('',#41524,#44917); +#44917 = DEFINITIONAL_REPRESENTATION('',(#44918),#44922); +#44918 = LINE('',#44919,#44920); +#44919 = CARTESIAN_POINT('',(0.,-1.58)); +#44920 = VECTOR('',#44921,1.); +#44921 = DIRECTION('',(1.,0.)); +#44922 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44923 = ORIENTED_EDGE('',*,*,#44924,.T.); +#44924 = EDGE_CURVE('',#44902,#44925,#44927,.T.); +#44925 = VERTEX_POINT('',#44926); +#44926 = CARTESIAN_POINT('',(138.601875,-132.764031,1.58)); +#44927 = SURFACE_CURVE('',#44928,(#44932,#44939),.PCURVE_S1.); +#44928 = LINE('',#44929,#44930); +#44929 = CARTESIAN_POINT('',(138.620462,-133.095024,1.58)); +#44930 = VECTOR('',#44931,1.); +#44931 = DIRECTION('',(-5.606693457932E-02,0.998427012278,0.)); +#44932 = PCURVE('',#40674,#44933); +#44933 = DEFINITIONAL_REPRESENTATION('',(#44934),#44938); +#44934 = LINE('',#44935,#44936); +#44935 = CARTESIAN_POINT('',(14.028029067017,-43.97524868659)); +#44936 = VECTOR('',#44937,1.); +#44937 = DIRECTION('',(5.606693457932E-02,0.998427012278)); +#44938 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44939 = PCURVE('',#41552,#44940); +#44940 = DEFINITIONAL_REPRESENTATION('',(#44941),#44945); +#44941 = LINE('',#44942,#44943); +#44942 = CARTESIAN_POINT('',(0.,-1.58)); +#44943 = VECTOR('',#44944,1.); +#44944 = DIRECTION('',(1.,0.)); +#44945 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44946 = ORIENTED_EDGE('',*,*,#44947,.T.); +#44947 = EDGE_CURVE('',#44925,#44948,#44950,.T.); +#44948 = VERTEX_POINT('',#44949); +#44949 = CARTESIAN_POINT('',(138.546346,-132.4372,1.58)); +#44950 = SURFACE_CURVE('',#44951,(#44955,#44962),.PCURVE_S1.); +#44951 = LINE('',#44952,#44953); +#44952 = CARTESIAN_POINT('',(138.601875,-132.764031,1.58)); +#44953 = VECTOR('',#44954,1.); +#44954 = DIRECTION('',(-0.167500886209,0.985871925312,0.)); +#44955 = PCURVE('',#40674,#44956); +#44956 = DEFINITIONAL_REPRESENTATION('',(#44957),#44961); +#44957 = LINE('',#44958,#44959); +#44958 = CARTESIAN_POINT('',(14.046616067017,-43.64425568659)); +#44959 = VECTOR('',#44960,1.); +#44960 = DIRECTION('',(0.167500886209,0.985871925312)); +#44961 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44962 = PCURVE('',#41580,#44963); +#44963 = DEFINITIONAL_REPRESENTATION('',(#44964),#44968); +#44964 = LINE('',#44965,#44966); +#44965 = CARTESIAN_POINT('',(0.,-1.58)); +#44966 = VECTOR('',#44967,1.); +#44967 = DIRECTION('',(1.,0.)); +#44968 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44969 = ORIENTED_EDGE('',*,*,#44970,.T.); +#44970 = EDGE_CURVE('',#44948,#44971,#44973,.T.); +#44971 = VERTEX_POINT('',#44972); +#44972 = CARTESIAN_POINT('',(138.454572,-132.118641,1.58)); +#44973 = SURFACE_CURVE('',#44974,(#44978,#44985),.PCURVE_S1.); +#44974 = LINE('',#44975,#44976); +#44975 = CARTESIAN_POINT('',(138.546346,-132.4372,1.58)); +#44976 = VECTOR('',#44977,1.); +#44977 = DIRECTION('',(-0.276831982772,0.960918338525,0.)); +#44978 = PCURVE('',#40674,#44979); +#44979 = DEFINITIONAL_REPRESENTATION('',(#44980),#44984); +#44980 = LINE('',#44981,#44982); +#44981 = CARTESIAN_POINT('',(14.102145067017,-43.31742468659)); +#44982 = VECTOR('',#44983,1.); +#44983 = DIRECTION('',(0.276831982772,0.960918338525)); +#44984 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44985 = PCURVE('',#41608,#44986); +#44986 = DEFINITIONAL_REPRESENTATION('',(#44987),#44991); +#44987 = LINE('',#44988,#44989); +#44988 = CARTESIAN_POINT('',(0.,-1.58)); +#44989 = VECTOR('',#44990,1.); +#44990 = DIRECTION('',(1.,0.)); +#44991 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#44992 = ORIENTED_EDGE('',*,*,#44993,.T.); +#44993 = EDGE_CURVE('',#44971,#44994,#44996,.T.); +#44994 = VERTEX_POINT('',#44995); +#44995 = CARTESIAN_POINT('',(138.327707,-131.812361,1.58)); +#44996 = SURFACE_CURVE('',#44997,(#45001,#45008),.PCURVE_S1.); +#44997 = LINE('',#44998,#44999); +#44998 = CARTESIAN_POINT('',(138.454572,-132.118641,1.58)); +#44999 = VECTOR('',#45000,1.); +#45000 = DIRECTION('',(-0.382682583012,0.923879884324,0.)); +#45001 = PCURVE('',#40674,#45002); +#45002 = DEFINITIONAL_REPRESENTATION('',(#45003),#45007); +#45003 = LINE('',#45004,#45005); +#45004 = CARTESIAN_POINT('',(14.193919067017,-42.99886568659)); +#45005 = VECTOR('',#45006,1.); +#45006 = DIRECTION('',(0.382682583012,0.923879884324)); +#45007 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45008 = PCURVE('',#41636,#45009); +#45009 = DEFINITIONAL_REPRESENTATION('',(#45010),#45014); +#45010 = LINE('',#45011,#45012); +#45011 = CARTESIAN_POINT('',(0.,-1.58)); +#45012 = VECTOR('',#45013,1.); +#45013 = DIRECTION('',(1.,0.)); +#45014 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45015 = ORIENTED_EDGE('',*,*,#45016,.T.); +#45016 = EDGE_CURVE('',#44994,#45017,#45019,.T.); +#45017 = VERTEX_POINT('',#45018); +#45018 = CARTESIAN_POINT('',(138.167348,-131.522211,1.58)); +#45019 = SURFACE_CURVE('',#45020,(#45024,#45031),.PCURVE_S1.); +#45020 = LINE('',#45021,#45022); +#45021 = CARTESIAN_POINT('',(138.327707,-131.812361,1.58)); +#45022 = VECTOR('',#45023,1.); +#45023 = DIRECTION('',(-0.48371602954,0.875225001223,0.)); +#45024 = PCURVE('',#40674,#45025); +#45025 = DEFINITIONAL_REPRESENTATION('',(#45026),#45030); +#45026 = LINE('',#45027,#45028); +#45027 = CARTESIAN_POINT('',(14.320784067017,-42.69258568659)); +#45028 = VECTOR('',#45029,1.); +#45029 = DIRECTION('',(0.48371602954,0.875225001223)); +#45030 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45031 = PCURVE('',#41664,#45032); +#45032 = DEFINITIONAL_REPRESENTATION('',(#45033),#45037); +#45033 = LINE('',#45034,#45035); +#45034 = CARTESIAN_POINT('',(0.,-1.58)); +#45035 = VECTOR('',#45036,1.); +#45036 = DIRECTION('',(1.,0.)); +#45037 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45038 = ORIENTED_EDGE('',*,*,#45039,.T.); +#45039 = EDGE_CURVE('',#45017,#45040,#45042,.T.); +#45040 = VERTEX_POINT('',#45041); +#45041 = CARTESIAN_POINT('',(137.97551,-131.25184,1.58)); +#45042 = SURFACE_CURVE('',#45043,(#45047,#45054),.PCURVE_S1.); +#45043 = LINE('',#45044,#45045); +#45044 = CARTESIAN_POINT('',(138.167348,-131.522211,1.58)); +#45045 = VECTOR('',#45046,1.); +#45046 = DIRECTION('',(-0.578670383383,0.815561516622,0.)); +#45047 = PCURVE('',#40674,#45048); +#45048 = DEFINITIONAL_REPRESENTATION('',(#45049),#45053); +#45049 = LINE('',#45050,#45051); +#45050 = CARTESIAN_POINT('',(14.481143067017,-42.40243568659)); +#45051 = VECTOR('',#45052,1.); +#45052 = DIRECTION('',(0.578670383383,0.815561516622)); +#45053 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45054 = PCURVE('',#41692,#45055); +#45055 = DEFINITIONAL_REPRESENTATION('',(#45056),#45060); +#45056 = LINE('',#45057,#45058); +#45057 = CARTESIAN_POINT('',(0.,-1.58)); +#45058 = VECTOR('',#45059,1.); +#45059 = DIRECTION('',(1.,0.)); +#45060 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45061 = ORIENTED_EDGE('',*,*,#45062,.T.); +#45062 = EDGE_CURVE('',#45040,#45063,#45065,.T.); +#45063 = VERTEX_POINT('',#45064); +#45064 = CARTESIAN_POINT('',(137.754606,-131.004649,1.58)); +#45065 = SURFACE_CURVE('',#45066,(#45070,#45077),.PCURVE_S1.); +#45066 = LINE('',#45067,#45068); +#45067 = CARTESIAN_POINT('',(137.97551,-131.25184,1.58)); +#45068 = VECTOR('',#45069,1.); +#45069 = DIRECTION('',(-0.666347612225,0.745641240599,0.)); +#45070 = PCURVE('',#40674,#45071); +#45071 = DEFINITIONAL_REPRESENTATION('',(#45072),#45076); +#45072 = LINE('',#45073,#45074); +#45073 = CARTESIAN_POINT('',(14.672981067017,-42.13206468659)); +#45074 = VECTOR('',#45075,1.); +#45075 = DIRECTION('',(0.666347612225,0.745641240599)); +#45076 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45077 = PCURVE('',#41720,#45078); +#45078 = DEFINITIONAL_REPRESENTATION('',(#45079),#45083); +#45079 = LINE('',#45080,#45081); +#45080 = CARTESIAN_POINT('',(0.,-1.58)); +#45081 = VECTOR('',#45082,1.); +#45082 = DIRECTION('',(1.,0.)); +#45083 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45084 = ORIENTED_EDGE('',*,*,#45085,.T.); +#45085 = EDGE_CURVE('',#45063,#45086,#45088,.T.); +#45086 = VERTEX_POINT('',#45087); +#45087 = CARTESIAN_POINT('',(137.507415,-130.783745,1.58)); +#45088 = SURFACE_CURVE('',#45089,(#45093,#45100),.PCURVE_S1.); +#45089 = LINE('',#45090,#45091); +#45090 = CARTESIAN_POINT('',(137.754606,-131.004649,1.58)); +#45091 = VECTOR('',#45092,1.); +#45092 = DIRECTION('',(-0.745641240599,0.666347612224,0.)); +#45093 = PCURVE('',#40674,#45094); +#45094 = DEFINITIONAL_REPRESENTATION('',(#45095),#45099); +#45095 = LINE('',#45096,#45097); +#45096 = CARTESIAN_POINT('',(14.893885067017,-41.88487368659)); +#45097 = VECTOR('',#45098,1.); +#45098 = DIRECTION('',(0.745641240599,0.666347612224)); +#45099 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45100 = PCURVE('',#41748,#45101); +#45101 = DEFINITIONAL_REPRESENTATION('',(#45102),#45106); +#45102 = LINE('',#45103,#45104); +#45103 = CARTESIAN_POINT('',(0.,-1.58)); +#45104 = VECTOR('',#45105,1.); +#45105 = DIRECTION('',(1.,0.)); +#45106 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45107 = ORIENTED_EDGE('',*,*,#45108,.T.); +#45108 = EDGE_CURVE('',#45086,#45109,#45111,.T.); +#45109 = VERTEX_POINT('',#45110); +#45110 = CARTESIAN_POINT('',(137.237044,-130.591908,1.58)); +#45111 = SURFACE_CURVE('',#45112,(#45116,#45123),.PCURVE_S1.); +#45112 = LINE('',#45113,#45114); +#45113 = CARTESIAN_POINT('',(137.507415,-130.783745,1.58)); +#45114 = VECTOR('',#45115,1.); +#45115 = DIRECTION('',(-0.815562940211,0.578668377013,0.)); +#45116 = PCURVE('',#40674,#45117); +#45117 = DEFINITIONAL_REPRESENTATION('',(#45118),#45122); +#45118 = LINE('',#45119,#45120); +#45119 = CARTESIAN_POINT('',(15.141076067017,-41.66396968659)); +#45120 = VECTOR('',#45121,1.); +#45121 = DIRECTION('',(0.815562940211,0.578668377013)); +#45122 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45123 = PCURVE('',#41776,#45124); +#45124 = DEFINITIONAL_REPRESENTATION('',(#45125),#45129); +#45125 = LINE('',#45126,#45127); +#45126 = CARTESIAN_POINT('',(0.,-1.58)); +#45127 = VECTOR('',#45128,1.); +#45128 = DIRECTION('',(1.,0.)); +#45129 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45130 = ORIENTED_EDGE('',*,*,#45131,.T.); +#45131 = EDGE_CURVE('',#45109,#45132,#45134,.T.); +#45132 = VERTEX_POINT('',#45133); +#45133 = CARTESIAN_POINT('',(136.946894,-130.431548,1.58)); +#45134 = SURFACE_CURVE('',#45135,(#45139,#45146),.PCURVE_S1.); +#45135 = LINE('',#45136,#45137); +#45136 = CARTESIAN_POINT('',(137.237044,-130.591908,1.58)); +#45137 = VECTOR('',#45138,1.); +#45138 = DIRECTION('',(-0.875223724173,0.483718340198,0.)); +#45139 = PCURVE('',#40674,#45140); +#45140 = DEFINITIONAL_REPRESENTATION('',(#45141),#45145); +#45141 = LINE('',#45142,#45143); +#45142 = CARTESIAN_POINT('',(15.411447067017,-41.47213268659)); +#45143 = VECTOR('',#45144,1.); +#45144 = DIRECTION('',(0.875223724173,0.483718340198)); +#45145 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45146 = PCURVE('',#41804,#45147); +#45147 = DEFINITIONAL_REPRESENTATION('',(#45148),#45152); +#45148 = LINE('',#45149,#45150); +#45149 = CARTESIAN_POINT('',(0.,-1.58)); +#45150 = VECTOR('',#45151,1.); +#45151 = DIRECTION('',(1.,0.)); +#45152 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45153 = ORIENTED_EDGE('',*,*,#45154,.T.); +#45154 = EDGE_CURVE('',#45132,#45155,#45157,.T.); +#45155 = VERTEX_POINT('',#45156); +#45156 = CARTESIAN_POINT('',(136.640614,-130.304684,1.58)); +#45157 = SURFACE_CURVE('',#45158,(#45162,#45169),.PCURVE_S1.); +#45158 = LINE('',#45159,#45160); +#45159 = CARTESIAN_POINT('',(136.946894,-130.431548,1.58)); +#45160 = VECTOR('',#45161,1.); +#45161 = DIRECTION('',(-0.923880950798,0.3826800083,0.)); +#45162 = PCURVE('',#40674,#45163); +#45163 = DEFINITIONAL_REPRESENTATION('',(#45164),#45168); +#45164 = LINE('',#45165,#45166); +#45165 = CARTESIAN_POINT('',(15.701597067017,-41.31177268659)); +#45166 = VECTOR('',#45167,1.); +#45167 = DIRECTION('',(0.923880950798,0.3826800083)); +#45168 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45169 = PCURVE('',#41832,#45170); +#45170 = DEFINITIONAL_REPRESENTATION('',(#45171),#45175); +#45171 = LINE('',#45172,#45173); +#45172 = CARTESIAN_POINT('',(0.,-1.58)); +#45173 = VECTOR('',#45174,1.); +#45174 = DIRECTION('',(1.,0.)); +#45175 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45176 = ORIENTED_EDGE('',*,*,#45177,.T.); +#45177 = EDGE_CURVE('',#45155,#45178,#45180,.T.); +#45178 = VERTEX_POINT('',#45179); +#45179 = CARTESIAN_POINT('',(136.322055,-130.21291,1.58)); +#45180 = SURFACE_CURVE('',#45181,(#45185,#45192),.PCURVE_S1.); +#45181 = LINE('',#45182,#45183); +#45182 = CARTESIAN_POINT('',(136.640614,-130.304684,1.58)); +#45183 = VECTOR('',#45184,1.); +#45184 = DIRECTION('',(-0.960918338525,0.276831982772,0.)); +#45185 = PCURVE('',#40674,#45186); +#45186 = DEFINITIONAL_REPRESENTATION('',(#45187),#45191); +#45187 = LINE('',#45188,#45189); +#45188 = CARTESIAN_POINT('',(16.007877067017,-41.18490868659)); +#45189 = VECTOR('',#45190,1.); +#45190 = DIRECTION('',(0.960918338525,0.276831982772)); +#45191 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45192 = PCURVE('',#41860,#45193); +#45193 = DEFINITIONAL_REPRESENTATION('',(#45194),#45198); +#45194 = LINE('',#45195,#45196); +#45195 = CARTESIAN_POINT('',(0.,-1.58)); +#45196 = VECTOR('',#45197,1.); +#45197 = DIRECTION('',(1.,0.)); +#45198 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45199 = ORIENTED_EDGE('',*,*,#45200,.T.); +#45200 = EDGE_CURVE('',#45178,#45201,#45203,.T.); +#45201 = VERTEX_POINT('',#45202); +#45202 = CARTESIAN_POINT('',(135.995224,-130.157381,1.58)); +#45203 = SURFACE_CURVE('',#45204,(#45208,#45215),.PCURVE_S1.); +#45204 = LINE('',#45205,#45206); +#45205 = CARTESIAN_POINT('',(136.322055,-130.21291,1.58)); +#45206 = VECTOR('',#45207,1.); +#45207 = DIRECTION('',(-0.985871925312,0.167500886209,0.)); +#45208 = PCURVE('',#40674,#45209); +#45209 = DEFINITIONAL_REPRESENTATION('',(#45210),#45214); +#45210 = LINE('',#45211,#45212); +#45211 = CARTESIAN_POINT('',(16.326436067017,-41.09313468659)); +#45212 = VECTOR('',#45213,1.); +#45213 = DIRECTION('',(0.985871925312,0.167500886209)); +#45214 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45215 = PCURVE('',#41888,#45216); +#45216 = DEFINITIONAL_REPRESENTATION('',(#45217),#45221); +#45217 = LINE('',#45218,#45219); +#45218 = CARTESIAN_POINT('',(0.,-1.58)); +#45219 = VECTOR('',#45220,1.); +#45220 = DIRECTION('',(1.,0.)); +#45221 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45222 = ORIENTED_EDGE('',*,*,#45223,.T.); +#45223 = EDGE_CURVE('',#45201,#45224,#45226,.T.); +#45224 = VERTEX_POINT('',#45225); +#45225 = CARTESIAN_POINT('',(135.664231,-130.138793,1.58)); +#45226 = SURFACE_CURVE('',#45227,(#45231,#45238),.PCURVE_S1.); +#45227 = LINE('',#45228,#45229); +#45228 = CARTESIAN_POINT('',(135.995224,-130.157381,1.58)); +#45229 = VECTOR('',#45230,1.); +#45230 = DIRECTION('',(-0.998426843416,5.60699415559E-02,0.)); +#45231 = PCURVE('',#40674,#45232); +#45232 = DEFINITIONAL_REPRESENTATION('',(#45233),#45237); +#45233 = LINE('',#45234,#45235); +#45234 = CARTESIAN_POINT('',(16.653267067017,-41.03760568659)); +#45235 = VECTOR('',#45236,1.); +#45236 = DIRECTION('',(0.998426843416,5.60699415559E-02)); +#45237 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45238 = PCURVE('',#41916,#45239); +#45239 = DEFINITIONAL_REPRESENTATION('',(#45240),#45244); +#45240 = LINE('',#45241,#45242); +#45241 = CARTESIAN_POINT('',(0.,-1.58)); +#45242 = VECTOR('',#45243,1.); +#45243 = DIRECTION('',(1.,0.)); +#45244 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45245 = ORIENTED_EDGE('',*,*,#45246,.T.); +#45246 = EDGE_CURVE('',#45224,#45247,#45249,.T.); +#45247 = VERTEX_POINT('',#45248); +#45248 = CARTESIAN_POINT('',(135.572231,-130.138793,1.58)); +#45249 = SURFACE_CURVE('',#45250,(#45254,#45261),.PCURVE_S1.); +#45250 = LINE('',#45251,#45252); +#45251 = CARTESIAN_POINT('',(135.664231,-130.138793,1.58)); +#45252 = VECTOR('',#45253,1.); +#45253 = DIRECTION('',(-1.,0.,0.)); +#45254 = PCURVE('',#40674,#45255); +#45255 = DEFINITIONAL_REPRESENTATION('',(#45256),#45260); +#45256 = LINE('',#45257,#45258); +#45257 = CARTESIAN_POINT('',(16.984260067017,-41.01901768659)); +#45258 = VECTOR('',#45259,1.); +#45259 = DIRECTION('',(1.,0.)); +#45260 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45261 = PCURVE('',#41944,#45262); +#45262 = DEFINITIONAL_REPRESENTATION('',(#45263),#45267); +#45263 = LINE('',#45264,#45265); +#45264 = CARTESIAN_POINT('',(0.,-1.58)); +#45265 = VECTOR('',#45266,1.); +#45266 = DIRECTION('',(1.,0.)); +#45267 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45268 = ORIENTED_EDGE('',*,*,#45269,.T.); +#45269 = EDGE_CURVE('',#45247,#45270,#45272,.T.); +#45270 = VERTEX_POINT('',#45271); +#45271 = CARTESIAN_POINT('',(132.193738,-49.37312,1.58)); +#45272 = SURFACE_CURVE('',#45273,(#45277,#45284),.PCURVE_S1.); +#45273 = LINE('',#45274,#45275); +#45274 = CARTESIAN_POINT('',(135.572231,-130.138793,1.58)); +#45275 = VECTOR('',#45276,1.); +#45276 = DIRECTION('',(-4.179425339229E-02,0.999126238462,0.)); +#45277 = PCURVE('',#40674,#45278); +#45278 = DEFINITIONAL_REPRESENTATION('',(#45279),#45283); +#45279 = LINE('',#45280,#45281); +#45280 = CARTESIAN_POINT('',(17.076260067017,-41.01901768659)); +#45281 = VECTOR('',#45282,1.); +#45282 = DIRECTION('',(4.179425339229E-02,0.999126238462)); +#45283 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45284 = PCURVE('',#41972,#45285); +#45285 = DEFINITIONAL_REPRESENTATION('',(#45286),#45290); +#45286 = LINE('',#45287,#45288); +#45287 = CARTESIAN_POINT('',(0.,-1.58)); +#45288 = VECTOR('',#45289,1.); +#45289 = DIRECTION('',(1.,0.)); +#45290 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45291 = ORIENTED_EDGE('',*,*,#45292,.T.); +#45292 = EDGE_CURVE('',#45270,#45293,#45295,.T.); +#45293 = VERTEX_POINT('',#45294); +#45294 = CARTESIAN_POINT('',(132.213127,-49.151487,1.58)); +#45295 = SURFACE_CURVE('',#45296,(#45300,#45307),.PCURVE_S1.); +#45296 = LINE('',#45297,#45298); +#45297 = CARTESIAN_POINT('',(132.193738,-49.37312,1.58)); +#45298 = VECTOR('',#45299,1.); +#45299 = DIRECTION('',(8.71496095114E-02,0.996195234661,0.)); +#45300 = PCURVE('',#40674,#45301); +#45301 = DEFINITIONAL_REPRESENTATION('',(#45302),#45306); +#45302 = LINE('',#45303,#45304); +#45303 = CARTESIAN_POINT('',(20.454753067017,39.746655313404)); +#45304 = VECTOR('',#45305,1.); +#45305 = DIRECTION('',(-8.71496095114E-02,0.996195234661)); +#45306 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45307 = PCURVE('',#42000,#45308); +#45308 = DEFINITIONAL_REPRESENTATION('',(#45309),#45313); +#45309 = LINE('',#45310,#45311); +#45310 = CARTESIAN_POINT('',(0.,-1.58)); +#45311 = VECTOR('',#45312,1.); +#45312 = DIRECTION('',(1.,0.)); +#45313 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45314 = ORIENTED_EDGE('',*,*,#45315,.T.); +#45315 = EDGE_CURVE('',#45293,#45316,#45318,.T.); +#45316 = VERTEX_POINT('',#45317); +#45317 = CARTESIAN_POINT('',(132.270708,-48.936588,1.58)); +#45318 = SURFACE_CURVE('',#45319,(#45323,#45330),.PCURVE_S1.); +#45319 = LINE('',#45320,#45321); +#45320 = CARTESIAN_POINT('',(132.213127,-49.151487,1.58)); +#45321 = VECTOR('',#45322,1.); +#45322 = DIRECTION('',(0.258814794766,0.965926965153,0.)); +#45323 = PCURVE('',#40674,#45324); +#45324 = DEFINITIONAL_REPRESENTATION('',(#45325),#45329); +#45325 = LINE('',#45326,#45327); +#45326 = CARTESIAN_POINT('',(20.435364067017,39.968288313404)); +#45327 = VECTOR('',#45328,1.); +#45328 = DIRECTION('',(-0.258814794766,0.965926965153)); +#45329 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45330 = PCURVE('',#42028,#45331); +#45331 = DEFINITIONAL_REPRESENTATION('',(#45332),#45336); +#45332 = LINE('',#45333,#45334); +#45333 = CARTESIAN_POINT('',(0.,-1.58)); +#45334 = VECTOR('',#45335,1.); +#45335 = DIRECTION('',(1.,0.)); +#45336 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45337 = ORIENTED_EDGE('',*,*,#45338,.T.); +#45338 = EDGE_CURVE('',#45316,#45339,#45341,.T.); +#45339 = VERTEX_POINT('',#45340); +#45340 = CARTESIAN_POINT('',(132.364731,-48.734954,1.58)); +#45341 = SURFACE_CURVE('',#45342,(#45346,#45353),.PCURVE_S1.); +#45342 = LINE('',#45343,#45344); +#45343 = CARTESIAN_POINT('',(132.270708,-48.936588,1.58)); +#45344 = VECTOR('',#45345,1.); +#45345 = DIRECTION('',(0.422616495684,0.90630861056,0.)); +#45346 = PCURVE('',#40674,#45347); +#45347 = DEFINITIONAL_REPRESENTATION('',(#45348),#45352); +#45348 = LINE('',#45349,#45350); +#45349 = CARTESIAN_POINT('',(20.377783067017,40.183187313404)); +#45350 = VECTOR('',#45351,1.); +#45351 = DIRECTION('',(-0.422616495684,0.90630861056)); +#45352 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45353 = PCURVE('',#42056,#45354); +#45354 = DEFINITIONAL_REPRESENTATION('',(#45355),#45359); +#45355 = LINE('',#45356,#45357); +#45356 = CARTESIAN_POINT('',(0.,-1.58)); +#45357 = VECTOR('',#45358,1.); +#45358 = DIRECTION('',(1.,0.)); +#45359 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45360 = ORIENTED_EDGE('',*,*,#45361,.T.); +#45361 = EDGE_CURVE('',#45339,#45362,#45364,.T.); +#45362 = VERTEX_POINT('',#45363); +#45363 = CARTESIAN_POINT('',(132.492341,-48.55271,1.58)); +#45364 = SURFACE_CURVE('',#45365,(#45369,#45376),.PCURVE_S1.); +#45365 = LINE('',#45366,#45367); +#45366 = CARTESIAN_POINT('',(132.364731,-48.734954,1.58)); +#45367 = VECTOR('',#45368,1.); +#45368 = DIRECTION('',(0.573580590673,0.819149135386,0.)); +#45369 = PCURVE('',#40674,#45370); +#45370 = DEFINITIONAL_REPRESENTATION('',(#45371),#45375); +#45371 = LINE('',#45372,#45373); +#45372 = CARTESIAN_POINT('',(20.283760067017,40.384821313404)); +#45373 = VECTOR('',#45374,1.); +#45374 = DIRECTION('',(-0.573580590673,0.819149135386)); +#45375 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45376 = PCURVE('',#42084,#45377); +#45377 = DEFINITIONAL_REPRESENTATION('',(#45378),#45382); +#45378 = LINE('',#45379,#45380); +#45379 = CARTESIAN_POINT('',(0.,-1.58)); +#45380 = VECTOR('',#45381,1.); +#45381 = DIRECTION('',(1.,0.)); +#45382 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45383 = ORIENTED_EDGE('',*,*,#45384,.T.); +#45384 = EDGE_CURVE('',#45362,#45385,#45387,.T.); +#45385 = VERTEX_POINT('',#45386); +#45386 = CARTESIAN_POINT('',(132.649658,-48.395394,1.58)); +#45387 = SURFACE_CURVE('',#45388,(#45392,#45399),.PCURVE_S1.); +#45388 = LINE('',#45389,#45390); +#45389 = CARTESIAN_POINT('',(132.492341,-48.55271,1.58)); +#45390 = VECTOR('',#45391,1.); +#45391 = DIRECTION('',(0.707109028585,0.707104533781,0.)); +#45392 = PCURVE('',#40674,#45393); +#45393 = DEFINITIONAL_REPRESENTATION('',(#45394),#45398); +#45394 = LINE('',#45395,#45396); +#45395 = CARTESIAN_POINT('',(20.156150067017,40.567065313404)); +#45396 = VECTOR('',#45397,1.); +#45397 = DIRECTION('',(-0.707109028585,0.707104533781)); +#45398 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45399 = PCURVE('',#42112,#45400); +#45400 = DEFINITIONAL_REPRESENTATION('',(#45401),#45405); +#45401 = LINE('',#45402,#45403); +#45402 = CARTESIAN_POINT('',(0.,-1.58)); +#45403 = VECTOR('',#45404,1.); +#45404 = DIRECTION('',(1.,0.)); +#45405 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45406 = ORIENTED_EDGE('',*,*,#45407,.T.); +#45407 = EDGE_CURVE('',#45385,#45408,#45410,.T.); +#45408 = VERTEX_POINT('',#45409); +#45409 = CARTESIAN_POINT('',(132.831904,-48.267786,1.58)); +#45410 = SURFACE_CURVE('',#45411,(#45415,#45422),.PCURVE_S1.); +#45411 = LINE('',#45412,#45413); +#45412 = CARTESIAN_POINT('',(132.649658,-48.395394,1.58)); +#45413 = VECTOR('',#45414,1.); +#45414 = DIRECTION('',(0.819156316572,0.57357033485,0.)); +#45415 = PCURVE('',#40674,#45416); +#45416 = DEFINITIONAL_REPRESENTATION('',(#45417),#45421); +#45417 = LINE('',#45418,#45419); +#45418 = CARTESIAN_POINT('',(19.998833067017,40.724381313404)); +#45419 = VECTOR('',#45420,1.); +#45420 = DIRECTION('',(-0.819156316572,0.57357033485)); +#45421 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45422 = PCURVE('',#42140,#45423); +#45423 = DEFINITIONAL_REPRESENTATION('',(#45424),#45428); +#45424 = LINE('',#45425,#45426); +#45425 = CARTESIAN_POINT('',(0.,-1.58)); +#45426 = VECTOR('',#45427,1.); +#45427 = DIRECTION('',(1.,0.)); +#45428 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45429 = ORIENTED_EDGE('',*,*,#45430,.T.); +#45430 = EDGE_CURVE('',#45408,#45431,#45433,.T.); +#45431 = VERTEX_POINT('',#45432); +#45432 = CARTESIAN_POINT('',(133.03354,-48.173765,1.58)); +#45433 = SURFACE_CURVE('',#45434,(#45438,#45445),.PCURVE_S1.); +#45434 = LINE('',#45435,#45436); +#45435 = CARTESIAN_POINT('',(132.831904,-48.267786,1.58)); +#45436 = VECTOR('',#45437,1.); +#45437 = DIRECTION('',(0.906313659287,0.422605668431,0.)); +#45438 = PCURVE('',#40674,#45439); +#45439 = DEFINITIONAL_REPRESENTATION('',(#45440),#45444); +#45440 = LINE('',#45441,#45442); +#45441 = CARTESIAN_POINT('',(19.816587067017,40.851989313404)); +#45442 = VECTOR('',#45443,1.); +#45443 = DIRECTION('',(-0.906313659287,0.422605668431)); +#45444 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45445 = PCURVE('',#42168,#45446); +#45446 = DEFINITIONAL_REPRESENTATION('',(#45447),#45451); +#45447 = LINE('',#45448,#45449); +#45448 = CARTESIAN_POINT('',(0.,-1.58)); +#45449 = VECTOR('',#45450,1.); +#45450 = DIRECTION('',(1.,0.)); +#45451 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45452 = ORIENTED_EDGE('',*,*,#45453,.T.); +#45453 = EDGE_CURVE('',#45431,#45454,#45456,.T.); +#45454 = VERTEX_POINT('',#45455); +#45455 = CARTESIAN_POINT('',(133.248439,-48.116186,1.58)); +#45456 = SURFACE_CURVE('',#45457,(#45461,#45468),.PCURVE_S1.); +#45457 = LINE('',#45458,#45459); +#45458 = CARTESIAN_POINT('',(133.03354,-48.173765,1.58)); +#45459 = VECTOR('',#45460,1.); +#45460 = DIRECTION('',(0.965929212485,0.258806407315,0.)); +#45461 = PCURVE('',#40674,#45462); +#45462 = DEFINITIONAL_REPRESENTATION('',(#45463),#45467); +#45463 = LINE('',#45464,#45465); +#45464 = CARTESIAN_POINT('',(19.614951067017,40.946010313404)); +#45465 = VECTOR('',#45466,1.); +#45466 = DIRECTION('',(-0.965929212485,0.258806407315)); +#45467 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45468 = PCURVE('',#42196,#45469); +#45469 = DEFINITIONAL_REPRESENTATION('',(#45470),#45474); +#45470 = LINE('',#45471,#45472); +#45471 = CARTESIAN_POINT('',(0.,-1.58)); +#45472 = VECTOR('',#45473,1.); +#45473 = DIRECTION('',(1.,0.)); +#45474 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45475 = ORIENTED_EDGE('',*,*,#45476,.T.); +#45476 = EDGE_CURVE('',#45454,#45477,#45479,.T.); +#45477 = VERTEX_POINT('',#45478); +#45478 = CARTESIAN_POINT('',(133.470072,-48.096786,1.58)); +#45479 = SURFACE_CURVE('',#45480,(#45484,#45491),.PCURVE_S1.); +#45480 = LINE('',#45481,#45482); +#45481 = CARTESIAN_POINT('',(133.248439,-48.116186,1.58)); +#45482 = VECTOR('',#45483,1.); +#45483 = DIRECTION('',(0.996190940949,8.719867643536E-02,0.)); +#45484 = PCURVE('',#40674,#45485); +#45485 = DEFINITIONAL_REPRESENTATION('',(#45486),#45490); +#45486 = LINE('',#45487,#45488); +#45487 = CARTESIAN_POINT('',(19.400052067017,41.003589313404)); +#45488 = VECTOR('',#45489,1.); +#45489 = DIRECTION('',(-0.996190940949,8.719867643536E-02)); +#45490 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45491 = PCURVE('',#42224,#45492); +#45492 = DEFINITIONAL_REPRESENTATION('',(#45493),#45497); +#45493 = LINE('',#45494,#45495); +#45494 = CARTESIAN_POINT('',(0.,-1.58)); +#45495 = VECTOR('',#45496,1.); +#45496 = DIRECTION('',(1.,0.)); +#45497 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45498 = ORIENTED_EDGE('',*,*,#45499,.T.); +#45499 = EDGE_CURVE('',#45477,#40746,#45500,.T.); +#45500 = SURFACE_CURVE('',#45501,(#45505,#45512),.PCURVE_S1.); +#45501 = LINE('',#45502,#45503); +#45502 = CARTESIAN_POINT('',(133.470072,-48.096786,1.58)); +#45503 = VECTOR('',#45504,1.); +#45504 = DIRECTION('',(1.,0.,0.)); +#45505 = PCURVE('',#40674,#45506); +#45506 = DEFINITIONAL_REPRESENTATION('',(#45507),#45511); +#45507 = LINE('',#45508,#45509); +#45508 = CARTESIAN_POINT('',(19.178419067017,41.022989313404)); +#45509 = VECTOR('',#45510,1.); +#45510 = DIRECTION('',(-1.,0.)); +#45511 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45512 = PCURVE('',#40761,#45513); +#45513 = DEFINITIONAL_REPRESENTATION('',(#45514),#45518); +#45514 = LINE('',#45515,#45516); +#45515 = CARTESIAN_POINT('',(0.,-1.58)); +#45516 = VECTOR('',#45517,1.); +#45517 = DIRECTION('',(1.,0.)); +#45518 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45519 = ORIENTED_EDGE('',*,*,#40773,.T.); +#45520 = FACE_BOUND('',#45521,.F.); +#45521 = EDGE_LOOP('',(#45522,#45547,#45570,#45593,#45616,#45639,#45662, + #45685,#45708,#45731,#45754,#45777,#45800,#45823,#45846,#45869, + #45892,#45915,#45938,#45961,#45984,#46007,#46030,#46053,#46076, + #46099,#46122,#46145,#46168,#46191,#46214,#46237,#46260,#46283, + #46306,#46329,#46352,#46375)); +#45522 = ORIENTED_EDGE('',*,*,#45523,.F.); +#45523 = EDGE_CURVE('',#45524,#45526,#45528,.T.); +#45524 = VERTEX_POINT('',#45525); +#45525 = CARTESIAN_POINT('',(167.777887,-50.067303,1.58)); +#45526 = VERTEX_POINT('',#45527); +#45527 = CARTESIAN_POINT('',(168.005189,-50.128208,1.58)); +#45528 = SURFACE_CURVE('',#45529,(#45533,#45540),.PCURVE_S1.); +#45529 = LINE('',#45530,#45531); +#45530 = CARTESIAN_POINT('',(167.777887,-50.067303,1.58)); +#45531 = VECTOR('',#45532,1.); +#45532 = DIRECTION('',(0.965926237789,-0.25881750936,0.)); +#45533 = PCURVE('',#40674,#45534); +#45534 = DEFINITIONAL_REPRESENTATION('',(#45535),#45539); +#45535 = LINE('',#45536,#45537); +#45536 = CARTESIAN_POINT('',(-15.12939593298,39.052472313404)); +#45537 = VECTOR('',#45538,1.); +#45538 = DIRECTION('',(-0.965926237789,-0.25881750936)); +#45539 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45540 = PCURVE('',#42278,#45541); +#45541 = DEFINITIONAL_REPRESENTATION('',(#45542),#45546); +#45542 = LINE('',#45543,#45544); +#45543 = CARTESIAN_POINT('',(0.,-1.58)); +#45544 = VECTOR('',#45545,1.); +#45545 = DIRECTION('',(1.,0.)); +#45546 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45547 = ORIENTED_EDGE('',*,*,#45548,.F.); +#45548 = EDGE_CURVE('',#45549,#45524,#45551,.T.); +#45549 = VERTEX_POINT('',#45550); +#45550 = CARTESIAN_POINT('',(167.543462,-50.046793,1.58)); +#45551 = SURFACE_CURVE('',#45552,(#45556,#45563),.PCURVE_S1.); +#45552 = LINE('',#45553,#45554); +#45553 = CARTESIAN_POINT('',(167.543462,-50.046793,1.58)); +#45554 = VECTOR('',#45555,1.); +#45555 = DIRECTION('',(0.996194524659,-8.715772507518E-02,0.)); +#45556 = PCURVE('',#40674,#45557); +#45557 = DEFINITIONAL_REPRESENTATION('',(#45558),#45562); +#45558 = LINE('',#45559,#45560); +#45559 = CARTESIAN_POINT('',(-14.89497093298,39.072982313404)); +#45560 = VECTOR('',#45561,1.); +#45561 = DIRECTION('',(-0.996194524659,-8.715772507518E-02)); +#45562 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45563 = PCURVE('',#42306,#45564); +#45564 = DEFINITIONAL_REPRESENTATION('',(#45565),#45569); +#45565 = LINE('',#45566,#45567); +#45566 = CARTESIAN_POINT('',(0.,-1.58)); +#45567 = VECTOR('',#45568,1.); +#45568 = DIRECTION('',(1.,0.)); +#45569 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45570 = ORIENTED_EDGE('',*,*,#45571,.F.); +#45571 = EDGE_CURVE('',#45572,#45549,#45574,.T.); +#45572 = VERTEX_POINT('',#45573); +#45573 = CARTESIAN_POINT('',(166.743462,-50.046793,1.58)); +#45574 = SURFACE_CURVE('',#45575,(#45579,#45586),.PCURVE_S1.); +#45575 = LINE('',#45576,#45577); +#45576 = CARTESIAN_POINT('',(166.743462,-50.046793,1.58)); +#45577 = VECTOR('',#45578,1.); +#45578 = DIRECTION('',(1.,0.,0.)); +#45579 = PCURVE('',#40674,#45580); +#45580 = DEFINITIONAL_REPRESENTATION('',(#45581),#45585); +#45581 = LINE('',#45582,#45583); +#45582 = CARTESIAN_POINT('',(-14.09497093298,39.072982313404)); +#45583 = VECTOR('',#45584,1.); +#45584 = DIRECTION('',(-1.,0.)); +#45585 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45586 = PCURVE('',#42334,#45587); +#45587 = DEFINITIONAL_REPRESENTATION('',(#45588),#45592); +#45588 = LINE('',#45589,#45590); +#45589 = CARTESIAN_POINT('',(0.,-1.58)); +#45590 = VECTOR('',#45591,1.); +#45591 = DIRECTION('',(1.,0.)); +#45592 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45593 = ORIENTED_EDGE('',*,*,#45594,.F.); +#45594 = EDGE_CURVE('',#45595,#45572,#45597,.T.); +#45595 = VERTEX_POINT('',#45596); +#45596 = CARTESIAN_POINT('',(166.509037,-50.067303,1.58)); +#45597 = SURFACE_CURVE('',#45598,(#45602,#45609),.PCURVE_S1.); +#45598 = LINE('',#45599,#45600); +#45599 = CARTESIAN_POINT('',(166.509037,-50.067303,1.58)); +#45600 = VECTOR('',#45601,1.); +#45601 = DIRECTION('',(0.996194524659,8.715772507518E-02,0.)); +#45602 = PCURVE('',#40674,#45603); +#45603 = DEFINITIONAL_REPRESENTATION('',(#45604),#45608); +#45604 = LINE('',#45605,#45606); +#45605 = CARTESIAN_POINT('',(-13.86054593298,39.052472313404)); +#45606 = VECTOR('',#45607,1.); +#45607 = DIRECTION('',(-0.996194524659,8.715772507518E-02)); +#45608 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45609 = PCURVE('',#42362,#45610); +#45610 = DEFINITIONAL_REPRESENTATION('',(#45611),#45615); +#45611 = LINE('',#45612,#45613); +#45612 = CARTESIAN_POINT('',(0.,-1.58)); +#45613 = VECTOR('',#45614,1.); +#45614 = DIRECTION('',(1.,0.)); +#45615 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45616 = ORIENTED_EDGE('',*,*,#45617,.F.); +#45617 = EDGE_CURVE('',#45618,#45595,#45620,.T.); +#45618 = VERTEX_POINT('',#45619); +#45619 = CARTESIAN_POINT('',(166.281735,-50.128208,1.58)); +#45620 = SURFACE_CURVE('',#45621,(#45625,#45632),.PCURVE_S1.); +#45621 = LINE('',#45622,#45623); +#45622 = CARTESIAN_POINT('',(166.281735,-50.128208,1.58)); +#45623 = VECTOR('',#45624,1.); +#45624 = DIRECTION('',(0.965926237789,0.25881750936,0.)); +#45625 = PCURVE('',#40674,#45626); +#45626 = DEFINITIONAL_REPRESENTATION('',(#45627),#45631); +#45627 = LINE('',#45628,#45629); +#45628 = CARTESIAN_POINT('',(-13.63324393298,38.991567313404)); +#45629 = VECTOR('',#45630,1.); +#45630 = DIRECTION('',(-0.965926237789,0.25881750936)); +#45631 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45632 = PCURVE('',#42390,#45633); +#45633 = DEFINITIONAL_REPRESENTATION('',(#45634),#45638); +#45634 = LINE('',#45635,#45636); +#45635 = CARTESIAN_POINT('',(0.,-1.58)); +#45636 = VECTOR('',#45637,1.); +#45637 = DIRECTION('',(1.,0.)); +#45638 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45639 = ORIENTED_EDGE('',*,*,#45640,.F.); +#45640 = EDGE_CURVE('',#45641,#45618,#45643,.T.); +#45641 = VERTEX_POINT('',#45642); +#45642 = CARTESIAN_POINT('',(166.068462,-50.227659,1.58)); +#45643 = SURFACE_CURVE('',#45644,(#45648,#45655),.PCURVE_S1.); +#45644 = LINE('',#45645,#45646); +#45645 = CARTESIAN_POINT('',(166.068462,-50.227659,1.58)); +#45646 = VECTOR('',#45647,1.); +#45647 = DIRECTION('',(0.906307515506,0.422618844039,0.)); +#45648 = PCURVE('',#40674,#45649); +#45649 = DEFINITIONAL_REPRESENTATION('',(#45650),#45654); +#45650 = LINE('',#45651,#45652); +#45651 = CARTESIAN_POINT('',(-13.41997093298,38.892116313404)); +#45652 = VECTOR('',#45653,1.); +#45653 = DIRECTION('',(-0.906307515506,0.422618844039)); +#45654 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45655 = PCURVE('',#42418,#45656); +#45656 = DEFINITIONAL_REPRESENTATION('',(#45657),#45661); +#45657 = LINE('',#45658,#45659); +#45658 = CARTESIAN_POINT('',(0.,-1.58)); +#45659 = VECTOR('',#45660,1.); +#45660 = DIRECTION('',(1.,0.)); +#45661 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45662 = ORIENTED_EDGE('',*,*,#45663,.F.); +#45663 = EDGE_CURVE('',#45664,#45641,#45666,.T.); +#45664 = VERTEX_POINT('',#45665); +#45665 = CARTESIAN_POINT('',(165.875699,-50.362633,1.58)); +#45666 = SURFACE_CURVE('',#45667,(#45671,#45678),.PCURVE_S1.); +#45667 = LINE('',#45668,#45669); +#45668 = CARTESIAN_POINT('',(165.875699,-50.362633,1.58)); +#45669 = VECTOR('',#45670,1.); +#45670 = DIRECTION('',(0.819152255308,0.573576134984,0.)); +#45671 = PCURVE('',#40674,#45672); +#45672 = DEFINITIONAL_REPRESENTATION('',(#45673),#45677); +#45673 = LINE('',#45674,#45675); +#45674 = CARTESIAN_POINT('',(-13.22720793298,38.757142313404)); +#45675 = VECTOR('',#45676,1.); +#45676 = DIRECTION('',(-0.819152255308,0.573576134984)); +#45677 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45678 = PCURVE('',#42446,#45679); +#45679 = DEFINITIONAL_REPRESENTATION('',(#45680),#45684); +#45680 = LINE('',#45681,#45682); +#45681 = CARTESIAN_POINT('',(0.,-1.58)); +#45682 = VECTOR('',#45683,1.); +#45683 = DIRECTION('',(1.,0.)); +#45684 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45685 = ORIENTED_EDGE('',*,*,#45686,.F.); +#45686 = EDGE_CURVE('',#45687,#45664,#45689,.T.); +#45687 = VERTEX_POINT('',#45688); +#45688 = CARTESIAN_POINT('',(165.709302,-50.52903,1.58)); +#45689 = SURFACE_CURVE('',#45690,(#45694,#45701),.PCURVE_S1.); +#45690 = LINE('',#45691,#45692); +#45691 = CARTESIAN_POINT('',(165.709302,-50.52903,1.58)); +#45692 = VECTOR('',#45693,1.); +#45693 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#45694 = PCURVE('',#40674,#45695); +#45695 = DEFINITIONAL_REPRESENTATION('',(#45696),#45700); +#45696 = LINE('',#45697,#45698); +#45697 = CARTESIAN_POINT('',(-13.06081093298,38.590745313404)); +#45698 = VECTOR('',#45699,1.); +#45699 = DIRECTION('',(-0.707106781187,0.707106781187)); +#45700 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45701 = PCURVE('',#42474,#45702); +#45702 = DEFINITIONAL_REPRESENTATION('',(#45703),#45707); +#45703 = LINE('',#45704,#45705); +#45704 = CARTESIAN_POINT('',(0.,-1.58)); +#45705 = VECTOR('',#45706,1.); +#45706 = DIRECTION('',(1.,0.)); +#45707 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45708 = ORIENTED_EDGE('',*,*,#45709,.F.); +#45709 = EDGE_CURVE('',#45710,#45687,#45712,.T.); +#45710 = VERTEX_POINT('',#45711); +#45711 = CARTESIAN_POINT('',(165.574328,-50.721793,1.58)); +#45712 = SURFACE_CURVE('',#45713,(#45717,#45724),.PCURVE_S1.); +#45713 = LINE('',#45714,#45715); +#45714 = CARTESIAN_POINT('',(165.574328,-50.721793,1.58)); +#45715 = VECTOR('',#45716,1.); +#45716 = DIRECTION('',(0.573576134984,0.819152255308,0.)); +#45717 = PCURVE('',#40674,#45718); +#45718 = DEFINITIONAL_REPRESENTATION('',(#45719),#45723); +#45719 = LINE('',#45720,#45721); +#45720 = CARTESIAN_POINT('',(-12.92583693298,38.397982313404)); +#45721 = VECTOR('',#45722,1.); +#45722 = DIRECTION('',(-0.573576134984,0.819152255308)); +#45723 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45724 = PCURVE('',#42502,#45725); +#45725 = DEFINITIONAL_REPRESENTATION('',(#45726),#45730); +#45726 = LINE('',#45727,#45728); +#45727 = CARTESIAN_POINT('',(0.,-1.58)); +#45728 = VECTOR('',#45729,1.); +#45729 = DIRECTION('',(1.,0.)); +#45730 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45731 = ORIENTED_EDGE('',*,*,#45732,.F.); +#45732 = EDGE_CURVE('',#45733,#45710,#45735,.T.); +#45733 = VERTEX_POINT('',#45734); +#45734 = CARTESIAN_POINT('',(165.474877,-50.935066,1.58)); +#45735 = SURFACE_CURVE('',#45736,(#45740,#45747),.PCURVE_S1.); +#45736 = LINE('',#45737,#45738); +#45737 = CARTESIAN_POINT('',(165.474877,-50.935066,1.58)); +#45738 = VECTOR('',#45739,1.); +#45739 = DIRECTION('',(0.422618844039,0.906307515506,0.)); +#45740 = PCURVE('',#40674,#45741); +#45741 = DEFINITIONAL_REPRESENTATION('',(#45742),#45746); +#45742 = LINE('',#45743,#45744); +#45743 = CARTESIAN_POINT('',(-12.82638593298,38.184709313404)); +#45744 = VECTOR('',#45745,1.); +#45745 = DIRECTION('',(-0.422618844039,0.906307515506)); +#45746 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45747 = PCURVE('',#42530,#45748); +#45748 = DEFINITIONAL_REPRESENTATION('',(#45749),#45753); +#45749 = LINE('',#45750,#45751); +#45750 = CARTESIAN_POINT('',(0.,-1.58)); +#45751 = VECTOR('',#45752,1.); +#45752 = DIRECTION('',(1.,0.)); +#45753 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45754 = ORIENTED_EDGE('',*,*,#45755,.F.); +#45755 = EDGE_CURVE('',#45756,#45733,#45758,.T.); +#45756 = VERTEX_POINT('',#45757); +#45757 = CARTESIAN_POINT('',(165.413972,-51.162368,1.58)); +#45758 = SURFACE_CURVE('',#45759,(#45763,#45770),.PCURVE_S1.); +#45759 = LINE('',#45760,#45761); +#45760 = CARTESIAN_POINT('',(165.413972,-51.162368,1.58)); +#45761 = VECTOR('',#45762,1.); +#45762 = DIRECTION('',(0.25881750936,0.965926237789,0.)); +#45763 = PCURVE('',#40674,#45764); +#45764 = DEFINITIONAL_REPRESENTATION('',(#45765),#45769); +#45765 = LINE('',#45766,#45767); +#45766 = CARTESIAN_POINT('',(-12.76548093298,37.957407313404)); +#45767 = VECTOR('',#45768,1.); +#45768 = DIRECTION('',(-0.25881750936,0.965926237789)); +#45769 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45770 = PCURVE('',#42558,#45771); +#45771 = DEFINITIONAL_REPRESENTATION('',(#45772),#45776); +#45772 = LINE('',#45773,#45774); +#45773 = CARTESIAN_POINT('',(0.,-1.58)); +#45774 = VECTOR('',#45775,1.); +#45775 = DIRECTION('',(1.,0.)); +#45776 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45777 = ORIENTED_EDGE('',*,*,#45778,.F.); +#45778 = EDGE_CURVE('',#45779,#45756,#45781,.T.); +#45779 = VERTEX_POINT('',#45780); +#45780 = CARTESIAN_POINT('',(165.393462,-51.396793,1.58)); +#45781 = SURFACE_CURVE('',#45782,(#45786,#45793),.PCURVE_S1.); +#45782 = LINE('',#45783,#45784); +#45783 = CARTESIAN_POINT('',(165.393462,-51.396793,1.58)); +#45784 = VECTOR('',#45785,1.); +#45785 = DIRECTION('',(8.715772507518E-02,0.996194524659,0.)); +#45786 = PCURVE('',#40674,#45787); +#45787 = DEFINITIONAL_REPRESENTATION('',(#45788),#45792); +#45788 = LINE('',#45789,#45790); +#45789 = CARTESIAN_POINT('',(-12.74497093298,37.722982313404)); +#45790 = VECTOR('',#45791,1.); +#45791 = DIRECTION('',(-8.715772507518E-02,0.996194524659)); +#45792 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45793 = PCURVE('',#42586,#45794); +#45794 = DEFINITIONAL_REPRESENTATION('',(#45795),#45799); +#45795 = LINE('',#45796,#45797); +#45796 = CARTESIAN_POINT('',(0.,-1.58)); +#45797 = VECTOR('',#45798,1.); +#45798 = DIRECTION('',(1.,0.)); +#45799 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45800 = ORIENTED_EDGE('',*,*,#45801,.F.); +#45801 = EDGE_CURVE('',#45802,#45779,#45804,.T.); +#45802 = VERTEX_POINT('',#45803); +#45803 = CARTESIAN_POINT('',(165.413972,-51.631218,1.58)); +#45804 = SURFACE_CURVE('',#45805,(#45809,#45816),.PCURVE_S1.); +#45805 = LINE('',#45806,#45807); +#45806 = CARTESIAN_POINT('',(165.413972,-51.631218,1.58)); +#45807 = VECTOR('',#45808,1.); +#45808 = DIRECTION('',(-8.715772507518E-02,0.996194524659,0.)); +#45809 = PCURVE('',#40674,#45810); +#45810 = DEFINITIONAL_REPRESENTATION('',(#45811),#45815); +#45811 = LINE('',#45812,#45813); +#45812 = CARTESIAN_POINT('',(-12.76548093298,37.488557313404)); +#45813 = VECTOR('',#45814,1.); +#45814 = DIRECTION('',(8.715772507518E-02,0.996194524659)); +#45815 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45816 = PCURVE('',#42614,#45817); +#45817 = DEFINITIONAL_REPRESENTATION('',(#45818),#45822); +#45818 = LINE('',#45819,#45820); +#45819 = CARTESIAN_POINT('',(0.,-1.58)); +#45820 = VECTOR('',#45821,1.); +#45821 = DIRECTION('',(1.,0.)); +#45822 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45823 = ORIENTED_EDGE('',*,*,#45824,.F.); +#45824 = EDGE_CURVE('',#45825,#45802,#45827,.T.); +#45825 = VERTEX_POINT('',#45826); +#45826 = CARTESIAN_POINT('',(165.474877,-51.85852,1.58)); +#45827 = SURFACE_CURVE('',#45828,(#45832,#45839),.PCURVE_S1.); +#45828 = LINE('',#45829,#45830); +#45829 = CARTESIAN_POINT('',(165.474877,-51.85852,1.58)); +#45830 = VECTOR('',#45831,1.); +#45831 = DIRECTION('',(-0.25881750936,0.965926237789,0.)); +#45832 = PCURVE('',#40674,#45833); +#45833 = DEFINITIONAL_REPRESENTATION('',(#45834),#45838); +#45834 = LINE('',#45835,#45836); +#45835 = CARTESIAN_POINT('',(-12.82638593298,37.261255313404)); +#45836 = VECTOR('',#45837,1.); +#45837 = DIRECTION('',(0.25881750936,0.965926237789)); +#45838 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45839 = PCURVE('',#42642,#45840); +#45840 = DEFINITIONAL_REPRESENTATION('',(#45841),#45845); +#45841 = LINE('',#45842,#45843); +#45842 = CARTESIAN_POINT('',(0.,-1.58)); +#45843 = VECTOR('',#45844,1.); +#45844 = DIRECTION('',(1.,0.)); +#45845 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45846 = ORIENTED_EDGE('',*,*,#45847,.F.); +#45847 = EDGE_CURVE('',#45848,#45825,#45850,.T.); +#45848 = VERTEX_POINT('',#45849); +#45849 = CARTESIAN_POINT('',(165.574328,-52.071793,1.58)); +#45850 = SURFACE_CURVE('',#45851,(#45855,#45862),.PCURVE_S1.); +#45851 = LINE('',#45852,#45853); +#45852 = CARTESIAN_POINT('',(165.574328,-52.071793,1.58)); +#45853 = VECTOR('',#45854,1.); +#45854 = DIRECTION('',(-0.422618844039,0.906307515506,0.)); +#45855 = PCURVE('',#40674,#45856); +#45856 = DEFINITIONAL_REPRESENTATION('',(#45857),#45861); +#45857 = LINE('',#45858,#45859); +#45858 = CARTESIAN_POINT('',(-12.92583693298,37.047982313404)); +#45859 = VECTOR('',#45860,1.); +#45860 = DIRECTION('',(0.422618844039,0.906307515506)); +#45861 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45862 = PCURVE('',#42670,#45863); +#45863 = DEFINITIONAL_REPRESENTATION('',(#45864),#45868); +#45864 = LINE('',#45865,#45866); +#45865 = CARTESIAN_POINT('',(0.,-1.58)); +#45866 = VECTOR('',#45867,1.); +#45867 = DIRECTION('',(1.,0.)); +#45868 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45869 = ORIENTED_EDGE('',*,*,#45870,.F.); +#45870 = EDGE_CURVE('',#45871,#45848,#45873,.T.); +#45871 = VERTEX_POINT('',#45872); +#45872 = CARTESIAN_POINT('',(165.709302,-52.264556,1.58)); +#45873 = SURFACE_CURVE('',#45874,(#45878,#45885),.PCURVE_S1.); +#45874 = LINE('',#45875,#45876); +#45875 = CARTESIAN_POINT('',(165.709302,-52.264556,1.58)); +#45876 = VECTOR('',#45877,1.); +#45877 = DIRECTION('',(-0.573576134984,0.819152255308,0.)); +#45878 = PCURVE('',#40674,#45879); +#45879 = DEFINITIONAL_REPRESENTATION('',(#45880),#45884); +#45880 = LINE('',#45881,#45882); +#45881 = CARTESIAN_POINT('',(-13.06081093298,36.855219313404)); +#45882 = VECTOR('',#45883,1.); +#45883 = DIRECTION('',(0.573576134984,0.819152255308)); +#45884 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45885 = PCURVE('',#42698,#45886); +#45886 = DEFINITIONAL_REPRESENTATION('',(#45887),#45891); +#45887 = LINE('',#45888,#45889); +#45888 = CARTESIAN_POINT('',(0.,-1.58)); +#45889 = VECTOR('',#45890,1.); +#45890 = DIRECTION('',(1.,0.)); +#45891 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45892 = ORIENTED_EDGE('',*,*,#45893,.F.); +#45893 = EDGE_CURVE('',#45894,#45871,#45896,.T.); +#45894 = VERTEX_POINT('',#45895); +#45895 = CARTESIAN_POINT('',(165.875699,-52.430953,1.58)); +#45896 = SURFACE_CURVE('',#45897,(#45901,#45908),.PCURVE_S1.); +#45897 = LINE('',#45898,#45899); +#45898 = CARTESIAN_POINT('',(165.875699,-52.430953,1.58)); +#45899 = VECTOR('',#45900,1.); +#45900 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#45901 = PCURVE('',#40674,#45902); +#45902 = DEFINITIONAL_REPRESENTATION('',(#45903),#45907); +#45903 = LINE('',#45904,#45905); +#45904 = CARTESIAN_POINT('',(-13.22720793298,36.688822313404)); +#45905 = VECTOR('',#45906,1.); +#45906 = DIRECTION('',(0.707106781187,0.707106781187)); +#45907 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45908 = PCURVE('',#42726,#45909); +#45909 = DEFINITIONAL_REPRESENTATION('',(#45910),#45914); +#45910 = LINE('',#45911,#45912); +#45911 = CARTESIAN_POINT('',(0.,-1.58)); +#45912 = VECTOR('',#45913,1.); +#45913 = DIRECTION('',(1.,0.)); +#45914 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45915 = ORIENTED_EDGE('',*,*,#45916,.F.); +#45916 = EDGE_CURVE('',#45917,#45894,#45919,.T.); +#45917 = VERTEX_POINT('',#45918); +#45918 = CARTESIAN_POINT('',(166.068462,-52.565927,1.58)); +#45919 = SURFACE_CURVE('',#45920,(#45924,#45931),.PCURVE_S1.); +#45920 = LINE('',#45921,#45922); +#45921 = CARTESIAN_POINT('',(166.068462,-52.565927,1.58)); +#45922 = VECTOR('',#45923,1.); +#45923 = DIRECTION('',(-0.819152255308,0.573576134984,0.)); +#45924 = PCURVE('',#40674,#45925); +#45925 = DEFINITIONAL_REPRESENTATION('',(#45926),#45930); +#45926 = LINE('',#45927,#45928); +#45927 = CARTESIAN_POINT('',(-13.41997093298,36.553848313404)); +#45928 = VECTOR('',#45929,1.); +#45929 = DIRECTION('',(0.819152255308,0.573576134984)); +#45930 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45931 = PCURVE('',#42754,#45932); +#45932 = DEFINITIONAL_REPRESENTATION('',(#45933),#45937); +#45933 = LINE('',#45934,#45935); +#45934 = CARTESIAN_POINT('',(0.,-1.58)); +#45935 = VECTOR('',#45936,1.); +#45936 = DIRECTION('',(1.,0.)); +#45937 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45938 = ORIENTED_EDGE('',*,*,#45939,.F.); +#45939 = EDGE_CURVE('',#45940,#45917,#45942,.T.); +#45940 = VERTEX_POINT('',#45941); +#45941 = CARTESIAN_POINT('',(166.281735,-52.665378,1.58)); +#45942 = SURFACE_CURVE('',#45943,(#45947,#45954),.PCURVE_S1.); +#45943 = LINE('',#45944,#45945); +#45944 = CARTESIAN_POINT('',(166.281735,-52.665378,1.58)); +#45945 = VECTOR('',#45946,1.); +#45946 = DIRECTION('',(-0.906307515506,0.422618844039,0.)); +#45947 = PCURVE('',#40674,#45948); +#45948 = DEFINITIONAL_REPRESENTATION('',(#45949),#45953); +#45949 = LINE('',#45950,#45951); +#45950 = CARTESIAN_POINT('',(-13.63324393298,36.454397313404)); +#45951 = VECTOR('',#45952,1.); +#45952 = DIRECTION('',(0.906307515506,0.422618844039)); +#45953 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45954 = PCURVE('',#42782,#45955); +#45955 = DEFINITIONAL_REPRESENTATION('',(#45956),#45960); +#45956 = LINE('',#45957,#45958); +#45957 = CARTESIAN_POINT('',(0.,-1.58)); +#45958 = VECTOR('',#45959,1.); +#45959 = DIRECTION('',(1.,0.)); +#45960 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45961 = ORIENTED_EDGE('',*,*,#45962,.F.); +#45962 = EDGE_CURVE('',#45963,#45940,#45965,.T.); +#45963 = VERTEX_POINT('',#45964); +#45964 = CARTESIAN_POINT('',(166.509037,-52.726283,1.58)); +#45965 = SURFACE_CURVE('',#45966,(#45970,#45977),.PCURVE_S1.); +#45966 = LINE('',#45967,#45968); +#45967 = CARTESIAN_POINT('',(166.509037,-52.726283,1.58)); +#45968 = VECTOR('',#45969,1.); +#45969 = DIRECTION('',(-0.965926237789,0.25881750936,0.)); +#45970 = PCURVE('',#40674,#45971); +#45971 = DEFINITIONAL_REPRESENTATION('',(#45972),#45976); +#45972 = LINE('',#45973,#45974); +#45973 = CARTESIAN_POINT('',(-13.86054593298,36.393492313404)); +#45974 = VECTOR('',#45975,1.); +#45975 = DIRECTION('',(0.965926237789,0.25881750936)); +#45976 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45977 = PCURVE('',#42810,#45978); +#45978 = DEFINITIONAL_REPRESENTATION('',(#45979),#45983); +#45979 = LINE('',#45980,#45981); +#45980 = CARTESIAN_POINT('',(0.,-1.58)); +#45981 = VECTOR('',#45982,1.); +#45982 = DIRECTION('',(1.,0.)); +#45983 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#45984 = ORIENTED_EDGE('',*,*,#45985,.F.); +#45985 = EDGE_CURVE('',#45986,#45963,#45988,.T.); +#45986 = VERTEX_POINT('',#45987); +#45987 = CARTESIAN_POINT('',(166.743462,-52.746793,1.58)); +#45988 = SURFACE_CURVE('',#45989,(#45993,#46000),.PCURVE_S1.); +#45989 = LINE('',#45990,#45991); +#45990 = CARTESIAN_POINT('',(166.743462,-52.746793,1.58)); +#45991 = VECTOR('',#45992,1.); +#45992 = DIRECTION('',(-0.996194524659,8.715772507515E-02,0.)); +#45993 = PCURVE('',#40674,#45994); +#45994 = DEFINITIONAL_REPRESENTATION('',(#45995),#45999); +#45995 = LINE('',#45996,#45997); +#45996 = CARTESIAN_POINT('',(-14.09497093298,36.372982313404)); +#45997 = VECTOR('',#45998,1.); +#45998 = DIRECTION('',(0.996194524659,8.715772507515E-02)); +#45999 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46000 = PCURVE('',#42838,#46001); +#46001 = DEFINITIONAL_REPRESENTATION('',(#46002),#46006); +#46002 = LINE('',#46003,#46004); +#46003 = CARTESIAN_POINT('',(0.,-1.58)); +#46004 = VECTOR('',#46005,1.); +#46005 = DIRECTION('',(1.,0.)); +#46006 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46007 = ORIENTED_EDGE('',*,*,#46008,.F.); +#46008 = EDGE_CURVE('',#46009,#45986,#46011,.T.); +#46009 = VERTEX_POINT('',#46010); +#46010 = CARTESIAN_POINT('',(167.543462,-52.746793,1.58)); +#46011 = SURFACE_CURVE('',#46012,(#46016,#46023),.PCURVE_S1.); +#46012 = LINE('',#46013,#46014); +#46013 = CARTESIAN_POINT('',(167.543462,-52.746793,1.58)); +#46014 = VECTOR('',#46015,1.); +#46015 = DIRECTION('',(-1.,0.,0.)); +#46016 = PCURVE('',#40674,#46017); +#46017 = DEFINITIONAL_REPRESENTATION('',(#46018),#46022); +#46018 = LINE('',#46019,#46020); +#46019 = CARTESIAN_POINT('',(-14.89497093298,36.372982313404)); +#46020 = VECTOR('',#46021,1.); +#46021 = DIRECTION('',(1.,0.)); +#46022 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46023 = PCURVE('',#42866,#46024); +#46024 = DEFINITIONAL_REPRESENTATION('',(#46025),#46029); +#46025 = LINE('',#46026,#46027); +#46026 = CARTESIAN_POINT('',(0.,-1.58)); +#46027 = VECTOR('',#46028,1.); +#46028 = DIRECTION('',(1.,0.)); +#46029 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46030 = ORIENTED_EDGE('',*,*,#46031,.F.); +#46031 = EDGE_CURVE('',#46032,#46009,#46034,.T.); +#46032 = VERTEX_POINT('',#46033); +#46033 = CARTESIAN_POINT('',(167.777887,-52.726283,1.58)); +#46034 = SURFACE_CURVE('',#46035,(#46039,#46046),.PCURVE_S1.); +#46035 = LINE('',#46036,#46037); +#46036 = CARTESIAN_POINT('',(167.777887,-52.726283,1.58)); +#46037 = VECTOR('',#46038,1.); +#46038 = DIRECTION('',(-0.996194524659,-8.715772507515E-02,0.)); +#46039 = PCURVE('',#40674,#46040); +#46040 = DEFINITIONAL_REPRESENTATION('',(#46041),#46045); +#46041 = LINE('',#46042,#46043); +#46042 = CARTESIAN_POINT('',(-15.12939593298,36.393492313404)); +#46043 = VECTOR('',#46044,1.); +#46044 = DIRECTION('',(0.996194524659,-8.715772507515E-02)); +#46045 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46046 = PCURVE('',#42894,#46047); +#46047 = DEFINITIONAL_REPRESENTATION('',(#46048),#46052); +#46048 = LINE('',#46049,#46050); +#46049 = CARTESIAN_POINT('',(0.,-1.58)); +#46050 = VECTOR('',#46051,1.); +#46051 = DIRECTION('',(1.,0.)); +#46052 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46053 = ORIENTED_EDGE('',*,*,#46054,.F.); +#46054 = EDGE_CURVE('',#46055,#46032,#46057,.T.); +#46055 = VERTEX_POINT('',#46056); +#46056 = CARTESIAN_POINT('',(168.005189,-52.665378,1.58)); +#46057 = SURFACE_CURVE('',#46058,(#46062,#46069),.PCURVE_S1.); +#46058 = LINE('',#46059,#46060); +#46059 = CARTESIAN_POINT('',(168.005189,-52.665378,1.58)); +#46060 = VECTOR('',#46061,1.); +#46061 = DIRECTION('',(-0.965926237789,-0.25881750936,0.)); +#46062 = PCURVE('',#40674,#46063); +#46063 = DEFINITIONAL_REPRESENTATION('',(#46064),#46068); +#46064 = LINE('',#46065,#46066); +#46065 = CARTESIAN_POINT('',(-15.35669793298,36.454397313404)); +#46066 = VECTOR('',#46067,1.); +#46067 = DIRECTION('',(0.965926237789,-0.25881750936)); +#46068 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46069 = PCURVE('',#42922,#46070); +#46070 = DEFINITIONAL_REPRESENTATION('',(#46071),#46075); +#46071 = LINE('',#46072,#46073); +#46072 = CARTESIAN_POINT('',(0.,-1.58)); +#46073 = VECTOR('',#46074,1.); +#46074 = DIRECTION('',(1.,0.)); +#46075 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46076 = ORIENTED_EDGE('',*,*,#46077,.F.); +#46077 = EDGE_CURVE('',#46078,#46055,#46080,.T.); +#46078 = VERTEX_POINT('',#46079); +#46079 = CARTESIAN_POINT('',(168.218462,-52.565927,1.58)); +#46080 = SURFACE_CURVE('',#46081,(#46085,#46092),.PCURVE_S1.); +#46081 = LINE('',#46082,#46083); +#46082 = CARTESIAN_POINT('',(168.218462,-52.565927,1.58)); +#46083 = VECTOR('',#46084,1.); +#46084 = DIRECTION('',(-0.906307515506,-0.422618844039,0.)); +#46085 = PCURVE('',#40674,#46086); +#46086 = DEFINITIONAL_REPRESENTATION('',(#46087),#46091); +#46087 = LINE('',#46088,#46089); +#46088 = CARTESIAN_POINT('',(-15.56997093298,36.553848313404)); +#46089 = VECTOR('',#46090,1.); +#46090 = DIRECTION('',(0.906307515506,-0.422618844039)); +#46091 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46092 = PCURVE('',#42950,#46093); +#46093 = DEFINITIONAL_REPRESENTATION('',(#46094),#46098); +#46094 = LINE('',#46095,#46096); +#46095 = CARTESIAN_POINT('',(0.,-1.58)); +#46096 = VECTOR('',#46097,1.); +#46097 = DIRECTION('',(1.,0.)); +#46098 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46099 = ORIENTED_EDGE('',*,*,#46100,.F.); +#46100 = EDGE_CURVE('',#46101,#46078,#46103,.T.); +#46101 = VERTEX_POINT('',#46102); +#46102 = CARTESIAN_POINT('',(168.411225,-52.430953,1.58)); +#46103 = SURFACE_CURVE('',#46104,(#46108,#46115),.PCURVE_S1.); +#46104 = LINE('',#46105,#46106); +#46105 = CARTESIAN_POINT('',(168.411225,-52.430953,1.58)); +#46106 = VECTOR('',#46107,1.); +#46107 = DIRECTION('',(-0.819152255308,-0.573576134984,0.)); +#46108 = PCURVE('',#40674,#46109); +#46109 = DEFINITIONAL_REPRESENTATION('',(#46110),#46114); +#46110 = LINE('',#46111,#46112); +#46111 = CARTESIAN_POINT('',(-15.76273393298,36.688822313404)); +#46112 = VECTOR('',#46113,1.); +#46113 = DIRECTION('',(0.819152255308,-0.573576134984)); +#46114 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46115 = PCURVE('',#42978,#46116); +#46116 = DEFINITIONAL_REPRESENTATION('',(#46117),#46121); +#46117 = LINE('',#46118,#46119); +#46118 = CARTESIAN_POINT('',(0.,-1.58)); +#46119 = VECTOR('',#46120,1.); +#46120 = DIRECTION('',(1.,0.)); +#46121 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46122 = ORIENTED_EDGE('',*,*,#46123,.F.); +#46123 = EDGE_CURVE('',#46124,#46101,#46126,.T.); +#46124 = VERTEX_POINT('',#46125); +#46125 = CARTESIAN_POINT('',(168.577622,-52.264556,1.58)); +#46126 = SURFACE_CURVE('',#46127,(#46131,#46138),.PCURVE_S1.); +#46127 = LINE('',#46128,#46129); +#46128 = CARTESIAN_POINT('',(168.577622,-52.264556,1.58)); +#46129 = VECTOR('',#46130,1.); +#46130 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#46131 = PCURVE('',#40674,#46132); +#46132 = DEFINITIONAL_REPRESENTATION('',(#46133),#46137); +#46133 = LINE('',#46134,#46135); +#46134 = CARTESIAN_POINT('',(-15.92913093298,36.855219313404)); +#46135 = VECTOR('',#46136,1.); +#46136 = DIRECTION('',(0.707106781187,-0.707106781187)); +#46137 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46138 = PCURVE('',#43006,#46139); +#46139 = DEFINITIONAL_REPRESENTATION('',(#46140),#46144); +#46140 = LINE('',#46141,#46142); +#46141 = CARTESIAN_POINT('',(0.,-1.58)); +#46142 = VECTOR('',#46143,1.); +#46143 = DIRECTION('',(1.,0.)); +#46144 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46145 = ORIENTED_EDGE('',*,*,#46146,.F.); +#46146 = EDGE_CURVE('',#46147,#46124,#46149,.T.); +#46147 = VERTEX_POINT('',#46148); +#46148 = CARTESIAN_POINT('',(168.712596,-52.071793,1.58)); +#46149 = SURFACE_CURVE('',#46150,(#46154,#46161),.PCURVE_S1.); +#46150 = LINE('',#46151,#46152); +#46151 = CARTESIAN_POINT('',(168.712596,-52.071793,1.58)); +#46152 = VECTOR('',#46153,1.); +#46153 = DIRECTION('',(-0.573576134984,-0.819152255308,0.)); +#46154 = PCURVE('',#40674,#46155); +#46155 = DEFINITIONAL_REPRESENTATION('',(#46156),#46160); +#46156 = LINE('',#46157,#46158); +#46157 = CARTESIAN_POINT('',(-16.06410493298,37.047982313404)); +#46158 = VECTOR('',#46159,1.); +#46159 = DIRECTION('',(0.573576134984,-0.819152255308)); +#46160 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46161 = PCURVE('',#43034,#46162); +#46162 = DEFINITIONAL_REPRESENTATION('',(#46163),#46167); +#46163 = LINE('',#46164,#46165); +#46164 = CARTESIAN_POINT('',(0.,-1.58)); +#46165 = VECTOR('',#46166,1.); +#46166 = DIRECTION('',(1.,0.)); +#46167 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46168 = ORIENTED_EDGE('',*,*,#46169,.F.); +#46169 = EDGE_CURVE('',#46170,#46147,#46172,.T.); +#46170 = VERTEX_POINT('',#46171); +#46171 = CARTESIAN_POINT('',(168.812047,-51.85852,1.58)); +#46172 = SURFACE_CURVE('',#46173,(#46177,#46184),.PCURVE_S1.); +#46173 = LINE('',#46174,#46175); +#46174 = CARTESIAN_POINT('',(168.812047,-51.85852,1.58)); +#46175 = VECTOR('',#46176,1.); +#46176 = DIRECTION('',(-0.422618844039,-0.906307515506,0.)); +#46177 = PCURVE('',#40674,#46178); +#46178 = DEFINITIONAL_REPRESENTATION('',(#46179),#46183); +#46179 = LINE('',#46180,#46181); +#46180 = CARTESIAN_POINT('',(-16.16355593298,37.261255313404)); +#46181 = VECTOR('',#46182,1.); +#46182 = DIRECTION('',(0.422618844039,-0.906307515506)); +#46183 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46184 = PCURVE('',#43062,#46185); +#46185 = DEFINITIONAL_REPRESENTATION('',(#46186),#46190); +#46186 = LINE('',#46187,#46188); +#46187 = CARTESIAN_POINT('',(0.,-1.58)); +#46188 = VECTOR('',#46189,1.); +#46189 = DIRECTION('',(1.,0.)); +#46190 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46191 = ORIENTED_EDGE('',*,*,#46192,.F.); +#46192 = EDGE_CURVE('',#46193,#46170,#46195,.T.); +#46193 = VERTEX_POINT('',#46194); +#46194 = CARTESIAN_POINT('',(168.872952,-51.631218,1.58)); +#46195 = SURFACE_CURVE('',#46196,(#46200,#46207),.PCURVE_S1.); +#46196 = LINE('',#46197,#46198); +#46197 = CARTESIAN_POINT('',(168.872952,-51.631218,1.58)); +#46198 = VECTOR('',#46199,1.); +#46199 = DIRECTION('',(-0.25881750936,-0.965926237789,0.)); +#46200 = PCURVE('',#40674,#46201); +#46201 = DEFINITIONAL_REPRESENTATION('',(#46202),#46206); +#46202 = LINE('',#46203,#46204); +#46203 = CARTESIAN_POINT('',(-16.22446093298,37.488557313404)); +#46204 = VECTOR('',#46205,1.); +#46205 = DIRECTION('',(0.25881750936,-0.965926237789)); +#46206 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46207 = PCURVE('',#43090,#46208); +#46208 = DEFINITIONAL_REPRESENTATION('',(#46209),#46213); +#46209 = LINE('',#46210,#46211); +#46210 = CARTESIAN_POINT('',(0.,-1.58)); +#46211 = VECTOR('',#46212,1.); +#46212 = DIRECTION('',(1.,0.)); +#46213 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46214 = ORIENTED_EDGE('',*,*,#46215,.F.); +#46215 = EDGE_CURVE('',#46216,#46193,#46218,.T.); +#46216 = VERTEX_POINT('',#46217); +#46217 = CARTESIAN_POINT('',(168.893462,-51.396793,1.58)); +#46218 = SURFACE_CURVE('',#46219,(#46223,#46230),.PCURVE_S1.); +#46219 = LINE('',#46220,#46221); +#46220 = CARTESIAN_POINT('',(168.893462,-51.396793,1.58)); +#46221 = VECTOR('',#46222,1.); +#46222 = DIRECTION('',(-8.715772507518E-02,-0.996194524659,0.)); +#46223 = PCURVE('',#40674,#46224); +#46224 = DEFINITIONAL_REPRESENTATION('',(#46225),#46229); +#46225 = LINE('',#46226,#46227); +#46226 = CARTESIAN_POINT('',(-16.24497093298,37.722982313404)); +#46227 = VECTOR('',#46228,1.); +#46228 = DIRECTION('',(8.715772507518E-02,-0.996194524659)); +#46229 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46230 = PCURVE('',#43118,#46231); +#46231 = DEFINITIONAL_REPRESENTATION('',(#46232),#46236); +#46232 = LINE('',#46233,#46234); +#46233 = CARTESIAN_POINT('',(0.,-1.58)); +#46234 = VECTOR('',#46235,1.); +#46235 = DIRECTION('',(1.,0.)); +#46236 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46237 = ORIENTED_EDGE('',*,*,#46238,.F.); +#46238 = EDGE_CURVE('',#46239,#46216,#46241,.T.); +#46239 = VERTEX_POINT('',#46240); +#46240 = CARTESIAN_POINT('',(168.872952,-51.162368,1.58)); +#46241 = SURFACE_CURVE('',#46242,(#46246,#46253),.PCURVE_S1.); +#46242 = LINE('',#46243,#46244); +#46243 = CARTESIAN_POINT('',(168.872952,-51.162368,1.58)); +#46244 = VECTOR('',#46245,1.); +#46245 = DIRECTION('',(8.715772507518E-02,-0.996194524659,0.)); +#46246 = PCURVE('',#40674,#46247); +#46247 = DEFINITIONAL_REPRESENTATION('',(#46248),#46252); +#46248 = LINE('',#46249,#46250); +#46249 = CARTESIAN_POINT('',(-16.22446093298,37.957407313404)); +#46250 = VECTOR('',#46251,1.); +#46251 = DIRECTION('',(-8.715772507518E-02,-0.996194524659)); +#46252 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46253 = PCURVE('',#43146,#46254); +#46254 = DEFINITIONAL_REPRESENTATION('',(#46255),#46259); +#46255 = LINE('',#46256,#46257); +#46256 = CARTESIAN_POINT('',(0.,-1.58)); +#46257 = VECTOR('',#46258,1.); +#46258 = DIRECTION('',(1.,0.)); +#46259 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46260 = ORIENTED_EDGE('',*,*,#46261,.F.); +#46261 = EDGE_CURVE('',#46262,#46239,#46264,.T.); +#46262 = VERTEX_POINT('',#46263); +#46263 = CARTESIAN_POINT('',(168.812047,-50.935066,1.58)); +#46264 = SURFACE_CURVE('',#46265,(#46269,#46276),.PCURVE_S1.); +#46265 = LINE('',#46266,#46267); +#46266 = CARTESIAN_POINT('',(168.812047,-50.935066,1.58)); +#46267 = VECTOR('',#46268,1.); +#46268 = DIRECTION('',(0.25881750936,-0.965926237789,0.)); +#46269 = PCURVE('',#40674,#46270); +#46270 = DEFINITIONAL_REPRESENTATION('',(#46271),#46275); +#46271 = LINE('',#46272,#46273); +#46272 = CARTESIAN_POINT('',(-16.16355593298,38.184709313404)); +#46273 = VECTOR('',#46274,1.); +#46274 = DIRECTION('',(-0.25881750936,-0.965926237789)); +#46275 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46276 = PCURVE('',#43174,#46277); +#46277 = DEFINITIONAL_REPRESENTATION('',(#46278),#46282); +#46278 = LINE('',#46279,#46280); +#46279 = CARTESIAN_POINT('',(0.,-1.58)); +#46280 = VECTOR('',#46281,1.); +#46281 = DIRECTION('',(1.,0.)); +#46282 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46283 = ORIENTED_EDGE('',*,*,#46284,.F.); +#46284 = EDGE_CURVE('',#46285,#46262,#46287,.T.); +#46285 = VERTEX_POINT('',#46286); +#46286 = CARTESIAN_POINT('',(168.712596,-50.721793,1.58)); +#46287 = SURFACE_CURVE('',#46288,(#46292,#46299),.PCURVE_S1.); +#46288 = LINE('',#46289,#46290); +#46289 = CARTESIAN_POINT('',(168.712596,-50.721793,1.58)); +#46290 = VECTOR('',#46291,1.); +#46291 = DIRECTION('',(0.422618844039,-0.906307515506,0.)); +#46292 = PCURVE('',#40674,#46293); +#46293 = DEFINITIONAL_REPRESENTATION('',(#46294),#46298); +#46294 = LINE('',#46295,#46296); +#46295 = CARTESIAN_POINT('',(-16.06410493298,38.397982313404)); +#46296 = VECTOR('',#46297,1.); +#46297 = DIRECTION('',(-0.422618844039,-0.906307515506)); +#46298 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46299 = PCURVE('',#43202,#46300); +#46300 = DEFINITIONAL_REPRESENTATION('',(#46301),#46305); +#46301 = LINE('',#46302,#46303); +#46302 = CARTESIAN_POINT('',(0.,-1.58)); +#46303 = VECTOR('',#46304,1.); +#46304 = DIRECTION('',(1.,0.)); +#46305 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46306 = ORIENTED_EDGE('',*,*,#46307,.F.); +#46307 = EDGE_CURVE('',#46308,#46285,#46310,.T.); +#46308 = VERTEX_POINT('',#46309); +#46309 = CARTESIAN_POINT('',(168.577622,-50.52903,1.58)); +#46310 = SURFACE_CURVE('',#46311,(#46315,#46322),.PCURVE_S1.); +#46311 = LINE('',#46312,#46313); +#46312 = CARTESIAN_POINT('',(168.577622,-50.52903,1.58)); +#46313 = VECTOR('',#46314,1.); +#46314 = DIRECTION('',(0.573576134984,-0.819152255308,0.)); +#46315 = PCURVE('',#40674,#46316); +#46316 = DEFINITIONAL_REPRESENTATION('',(#46317),#46321); +#46317 = LINE('',#46318,#46319); +#46318 = CARTESIAN_POINT('',(-15.92913093298,38.590745313404)); +#46319 = VECTOR('',#46320,1.); +#46320 = DIRECTION('',(-0.573576134984,-0.819152255308)); +#46321 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46322 = PCURVE('',#43230,#46323); +#46323 = DEFINITIONAL_REPRESENTATION('',(#46324),#46328); +#46324 = LINE('',#46325,#46326); +#46325 = CARTESIAN_POINT('',(0.,-1.58)); +#46326 = VECTOR('',#46327,1.); +#46327 = DIRECTION('',(1.,0.)); +#46328 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46329 = ORIENTED_EDGE('',*,*,#46330,.F.); +#46330 = EDGE_CURVE('',#46331,#46308,#46333,.T.); +#46331 = VERTEX_POINT('',#46332); +#46332 = CARTESIAN_POINT('',(168.411225,-50.362633,1.58)); +#46333 = SURFACE_CURVE('',#46334,(#46338,#46345),.PCURVE_S1.); +#46334 = LINE('',#46335,#46336); +#46335 = CARTESIAN_POINT('',(168.411225,-50.362633,1.58)); +#46336 = VECTOR('',#46337,1.); +#46337 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#46338 = PCURVE('',#40674,#46339); +#46339 = DEFINITIONAL_REPRESENTATION('',(#46340),#46344); +#46340 = LINE('',#46341,#46342); +#46341 = CARTESIAN_POINT('',(-15.76273393298,38.757142313404)); +#46342 = VECTOR('',#46343,1.); +#46343 = DIRECTION('',(-0.707106781187,-0.707106781187)); +#46344 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46345 = PCURVE('',#43258,#46346); +#46346 = DEFINITIONAL_REPRESENTATION('',(#46347),#46351); +#46347 = LINE('',#46348,#46349); +#46348 = CARTESIAN_POINT('',(0.,-1.58)); +#46349 = VECTOR('',#46350,1.); +#46350 = DIRECTION('',(1.,0.)); +#46351 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46352 = ORIENTED_EDGE('',*,*,#46353,.F.); +#46353 = EDGE_CURVE('',#46354,#46331,#46356,.T.); +#46354 = VERTEX_POINT('',#46355); +#46355 = CARTESIAN_POINT('',(168.218462,-50.227659,1.58)); +#46356 = SURFACE_CURVE('',#46357,(#46361,#46368),.PCURVE_S1.); +#46357 = LINE('',#46358,#46359); +#46358 = CARTESIAN_POINT('',(168.218462,-50.227659,1.58)); +#46359 = VECTOR('',#46360,1.); +#46360 = DIRECTION('',(0.819152255308,-0.573576134984,0.)); +#46361 = PCURVE('',#40674,#46362); +#46362 = DEFINITIONAL_REPRESENTATION('',(#46363),#46367); +#46363 = LINE('',#46364,#46365); +#46364 = CARTESIAN_POINT('',(-15.56997093298,38.892116313404)); +#46365 = VECTOR('',#46366,1.); +#46366 = DIRECTION('',(-0.819152255308,-0.573576134984)); +#46367 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46368 = PCURVE('',#43286,#46369); +#46369 = DEFINITIONAL_REPRESENTATION('',(#46370),#46374); +#46370 = LINE('',#46371,#46372); +#46371 = CARTESIAN_POINT('',(0.,-1.58)); +#46372 = VECTOR('',#46373,1.); +#46373 = DIRECTION('',(1.,0.)); +#46374 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46375 = ORIENTED_EDGE('',*,*,#46376,.F.); +#46376 = EDGE_CURVE('',#45526,#46354,#46377,.T.); +#46377 = SURFACE_CURVE('',#46378,(#46382,#46389),.PCURVE_S1.); +#46378 = LINE('',#46379,#46380); +#46379 = CARTESIAN_POINT('',(168.005189,-50.128208,1.58)); +#46380 = VECTOR('',#46381,1.); +#46381 = DIRECTION('',(0.906307515506,-0.422618844039,0.)); +#46382 = PCURVE('',#40674,#46383); +#46383 = DEFINITIONAL_REPRESENTATION('',(#46384),#46388); +#46384 = LINE('',#46385,#46386); +#46385 = CARTESIAN_POINT('',(-15.35669793298,38.991567313404)); +#46386 = VECTOR('',#46387,1.); +#46387 = DIRECTION('',(-0.906307515506,-0.422618844039)); +#46388 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46389 = PCURVE('',#43312,#46390); +#46390 = DEFINITIONAL_REPRESENTATION('',(#46391),#46395); +#46391 = LINE('',#46392,#46393); +#46392 = CARTESIAN_POINT('',(0.,-1.58)); +#46393 = VECTOR('',#46394,1.); +#46394 = DIRECTION('',(1.,0.)); +#46395 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46396 = FACE_BOUND('',#46397,.F.); +#46397 = EDGE_LOOP('',(#46398,#46423,#46446,#46469,#46492,#46515,#46538, + #46561,#46584,#46607,#46630,#46653,#46676,#46699,#46722,#46745, + #46768,#46791,#46814,#46837,#46860,#46883,#46906,#46929,#46952, + #46975,#46998,#47021,#47044,#47067,#47090,#47113,#47136,#47159, + #47182,#47205,#47228,#47251)); +#46398 = ORIENTED_EDGE('',*,*,#46399,.F.); +#46399 = EDGE_CURVE('',#46400,#46402,#46404,.T.); +#46400 = VERTEX_POINT('',#46401); +#46401 = CARTESIAN_POINT('',(138.777887,-50.067303,1.58)); +#46402 = VERTEX_POINT('',#46403); +#46403 = CARTESIAN_POINT('',(139.005189,-50.128208,1.58)); +#46404 = SURFACE_CURVE('',#46405,(#46409,#46416),.PCURVE_S1.); +#46405 = LINE('',#46406,#46407); +#46406 = CARTESIAN_POINT('',(138.777887,-50.067303,1.58)); +#46407 = VECTOR('',#46408,1.); +#46408 = DIRECTION('',(0.965926237789,-0.25881750936,0.)); +#46409 = PCURVE('',#40674,#46410); +#46410 = DEFINITIONAL_REPRESENTATION('',(#46411),#46415); +#46411 = LINE('',#46412,#46413); +#46412 = CARTESIAN_POINT('',(13.870604067017,39.052472313404)); +#46413 = VECTOR('',#46414,1.); +#46414 = DIRECTION('',(-0.965926237789,-0.25881750936)); +#46415 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46416 = PCURVE('',#43344,#46417); +#46417 = DEFINITIONAL_REPRESENTATION('',(#46418),#46422); +#46418 = LINE('',#46419,#46420); +#46419 = CARTESIAN_POINT('',(0.,-1.58)); +#46420 = VECTOR('',#46421,1.); +#46421 = DIRECTION('',(1.,0.)); +#46422 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46423 = ORIENTED_EDGE('',*,*,#46424,.F.); +#46424 = EDGE_CURVE('',#46425,#46400,#46427,.T.); +#46425 = VERTEX_POINT('',#46426); +#46426 = CARTESIAN_POINT('',(138.543462,-50.046793,1.58)); +#46427 = SURFACE_CURVE('',#46428,(#46432,#46439),.PCURVE_S1.); +#46428 = LINE('',#46429,#46430); +#46429 = CARTESIAN_POINT('',(138.543462,-50.046793,1.58)); +#46430 = VECTOR('',#46431,1.); +#46431 = DIRECTION('',(0.996194524659,-8.715772507518E-02,0.)); +#46432 = PCURVE('',#40674,#46433); +#46433 = DEFINITIONAL_REPRESENTATION('',(#46434),#46438); +#46434 = LINE('',#46435,#46436); +#46435 = CARTESIAN_POINT('',(14.105029067017,39.072982313404)); +#46436 = VECTOR('',#46437,1.); +#46437 = DIRECTION('',(-0.996194524659,-8.715772507518E-02)); +#46438 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46439 = PCURVE('',#43372,#46440); +#46440 = DEFINITIONAL_REPRESENTATION('',(#46441),#46445); +#46441 = LINE('',#46442,#46443); +#46442 = CARTESIAN_POINT('',(0.,-1.58)); +#46443 = VECTOR('',#46444,1.); +#46444 = DIRECTION('',(1.,0.)); +#46445 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46446 = ORIENTED_EDGE('',*,*,#46447,.F.); +#46447 = EDGE_CURVE('',#46448,#46425,#46450,.T.); +#46448 = VERTEX_POINT('',#46449); +#46449 = CARTESIAN_POINT('',(137.743462,-50.046793,1.58)); +#46450 = SURFACE_CURVE('',#46451,(#46455,#46462),.PCURVE_S1.); +#46451 = LINE('',#46452,#46453); +#46452 = CARTESIAN_POINT('',(137.743462,-50.046793,1.58)); +#46453 = VECTOR('',#46454,1.); +#46454 = DIRECTION('',(1.,0.,0.)); +#46455 = PCURVE('',#40674,#46456); +#46456 = DEFINITIONAL_REPRESENTATION('',(#46457),#46461); +#46457 = LINE('',#46458,#46459); +#46458 = CARTESIAN_POINT('',(14.905029067017,39.072982313404)); +#46459 = VECTOR('',#46460,1.); +#46460 = DIRECTION('',(-1.,0.)); +#46461 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46462 = PCURVE('',#43400,#46463); +#46463 = DEFINITIONAL_REPRESENTATION('',(#46464),#46468); +#46464 = LINE('',#46465,#46466); +#46465 = CARTESIAN_POINT('',(0.,-1.58)); +#46466 = VECTOR('',#46467,1.); +#46467 = DIRECTION('',(1.,0.)); +#46468 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46469 = ORIENTED_EDGE('',*,*,#46470,.F.); +#46470 = EDGE_CURVE('',#46471,#46448,#46473,.T.); +#46471 = VERTEX_POINT('',#46472); +#46472 = CARTESIAN_POINT('',(137.509037,-50.067303,1.58)); +#46473 = SURFACE_CURVE('',#46474,(#46478,#46485),.PCURVE_S1.); +#46474 = LINE('',#46475,#46476); +#46475 = CARTESIAN_POINT('',(137.509037,-50.067303,1.58)); +#46476 = VECTOR('',#46477,1.); +#46477 = DIRECTION('',(0.996194524659,8.715772507518E-02,0.)); +#46478 = PCURVE('',#40674,#46479); +#46479 = DEFINITIONAL_REPRESENTATION('',(#46480),#46484); +#46480 = LINE('',#46481,#46482); +#46481 = CARTESIAN_POINT('',(15.139454067017,39.052472313404)); +#46482 = VECTOR('',#46483,1.); +#46483 = DIRECTION('',(-0.996194524659,8.715772507518E-02)); +#46484 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46485 = PCURVE('',#43428,#46486); +#46486 = DEFINITIONAL_REPRESENTATION('',(#46487),#46491); +#46487 = LINE('',#46488,#46489); +#46488 = CARTESIAN_POINT('',(0.,-1.58)); +#46489 = VECTOR('',#46490,1.); +#46490 = DIRECTION('',(1.,0.)); +#46491 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46492 = ORIENTED_EDGE('',*,*,#46493,.F.); +#46493 = EDGE_CURVE('',#46494,#46471,#46496,.T.); +#46494 = VERTEX_POINT('',#46495); +#46495 = CARTESIAN_POINT('',(137.281735,-50.128208,1.58)); +#46496 = SURFACE_CURVE('',#46497,(#46501,#46508),.PCURVE_S1.); +#46497 = LINE('',#46498,#46499); +#46498 = CARTESIAN_POINT('',(137.281735,-50.128208,1.58)); +#46499 = VECTOR('',#46500,1.); +#46500 = DIRECTION('',(0.965926237789,0.25881750936,0.)); +#46501 = PCURVE('',#40674,#46502); +#46502 = DEFINITIONAL_REPRESENTATION('',(#46503),#46507); +#46503 = LINE('',#46504,#46505); +#46504 = CARTESIAN_POINT('',(15.366756067017,38.991567313404)); +#46505 = VECTOR('',#46506,1.); +#46506 = DIRECTION('',(-0.965926237789,0.25881750936)); +#46507 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46508 = PCURVE('',#43456,#46509); +#46509 = DEFINITIONAL_REPRESENTATION('',(#46510),#46514); +#46510 = LINE('',#46511,#46512); +#46511 = CARTESIAN_POINT('',(0.,-1.58)); +#46512 = VECTOR('',#46513,1.); +#46513 = DIRECTION('',(1.,0.)); +#46514 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46515 = ORIENTED_EDGE('',*,*,#46516,.F.); +#46516 = EDGE_CURVE('',#46517,#46494,#46519,.T.); +#46517 = VERTEX_POINT('',#46518); +#46518 = CARTESIAN_POINT('',(137.068462,-50.227659,1.58)); +#46519 = SURFACE_CURVE('',#46520,(#46524,#46531),.PCURVE_S1.); +#46520 = LINE('',#46521,#46522); +#46521 = CARTESIAN_POINT('',(137.068462,-50.227659,1.58)); +#46522 = VECTOR('',#46523,1.); +#46523 = DIRECTION('',(0.906307515506,0.422618844039,0.)); +#46524 = PCURVE('',#40674,#46525); +#46525 = DEFINITIONAL_REPRESENTATION('',(#46526),#46530); +#46526 = LINE('',#46527,#46528); +#46527 = CARTESIAN_POINT('',(15.580029067017,38.892116313404)); +#46528 = VECTOR('',#46529,1.); +#46529 = DIRECTION('',(-0.906307515506,0.422618844039)); +#46530 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46531 = PCURVE('',#43484,#46532); +#46532 = DEFINITIONAL_REPRESENTATION('',(#46533),#46537); +#46533 = LINE('',#46534,#46535); +#46534 = CARTESIAN_POINT('',(0.,-1.58)); +#46535 = VECTOR('',#46536,1.); +#46536 = DIRECTION('',(1.,0.)); +#46537 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46538 = ORIENTED_EDGE('',*,*,#46539,.F.); +#46539 = EDGE_CURVE('',#46540,#46517,#46542,.T.); +#46540 = VERTEX_POINT('',#46541); +#46541 = CARTESIAN_POINT('',(136.875699,-50.362633,1.58)); +#46542 = SURFACE_CURVE('',#46543,(#46547,#46554),.PCURVE_S1.); +#46543 = LINE('',#46544,#46545); +#46544 = CARTESIAN_POINT('',(136.875699,-50.362633,1.58)); +#46545 = VECTOR('',#46546,1.); +#46546 = DIRECTION('',(0.819152255308,0.573576134984,0.)); +#46547 = PCURVE('',#40674,#46548); +#46548 = DEFINITIONAL_REPRESENTATION('',(#46549),#46553); +#46549 = LINE('',#46550,#46551); +#46550 = CARTESIAN_POINT('',(15.772792067017,38.757142313404)); +#46551 = VECTOR('',#46552,1.); +#46552 = DIRECTION('',(-0.819152255308,0.573576134984)); +#46553 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46554 = PCURVE('',#43512,#46555); +#46555 = DEFINITIONAL_REPRESENTATION('',(#46556),#46560); +#46556 = LINE('',#46557,#46558); +#46557 = CARTESIAN_POINT('',(0.,-1.58)); +#46558 = VECTOR('',#46559,1.); +#46559 = DIRECTION('',(1.,0.)); +#46560 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46561 = ORIENTED_EDGE('',*,*,#46562,.F.); +#46562 = EDGE_CURVE('',#46563,#46540,#46565,.T.); +#46563 = VERTEX_POINT('',#46564); +#46564 = CARTESIAN_POINT('',(136.709302,-50.52903,1.58)); +#46565 = SURFACE_CURVE('',#46566,(#46570,#46577),.PCURVE_S1.); +#46566 = LINE('',#46567,#46568); +#46567 = CARTESIAN_POINT('',(136.709302,-50.52903,1.58)); +#46568 = VECTOR('',#46569,1.); +#46569 = DIRECTION('',(0.707106781187,0.707106781187,0.)); +#46570 = PCURVE('',#40674,#46571); +#46571 = DEFINITIONAL_REPRESENTATION('',(#46572),#46576); +#46572 = LINE('',#46573,#46574); +#46573 = CARTESIAN_POINT('',(15.939189067017,38.590745313404)); +#46574 = VECTOR('',#46575,1.); +#46575 = DIRECTION('',(-0.707106781187,0.707106781187)); +#46576 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46577 = PCURVE('',#43540,#46578); +#46578 = DEFINITIONAL_REPRESENTATION('',(#46579),#46583); +#46579 = LINE('',#46580,#46581); +#46580 = CARTESIAN_POINT('',(0.,-1.58)); +#46581 = VECTOR('',#46582,1.); +#46582 = DIRECTION('',(1.,0.)); +#46583 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46584 = ORIENTED_EDGE('',*,*,#46585,.F.); +#46585 = EDGE_CURVE('',#46586,#46563,#46588,.T.); +#46586 = VERTEX_POINT('',#46587); +#46587 = CARTESIAN_POINT('',(136.574328,-50.721793,1.58)); +#46588 = SURFACE_CURVE('',#46589,(#46593,#46600),.PCURVE_S1.); +#46589 = LINE('',#46590,#46591); +#46590 = CARTESIAN_POINT('',(136.574328,-50.721793,1.58)); +#46591 = VECTOR('',#46592,1.); +#46592 = DIRECTION('',(0.573576134984,0.819152255308,0.)); +#46593 = PCURVE('',#40674,#46594); +#46594 = DEFINITIONAL_REPRESENTATION('',(#46595),#46599); +#46595 = LINE('',#46596,#46597); +#46596 = CARTESIAN_POINT('',(16.074163067017,38.397982313404)); +#46597 = VECTOR('',#46598,1.); +#46598 = DIRECTION('',(-0.573576134984,0.819152255308)); +#46599 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46600 = PCURVE('',#43568,#46601); +#46601 = DEFINITIONAL_REPRESENTATION('',(#46602),#46606); +#46602 = LINE('',#46603,#46604); +#46603 = CARTESIAN_POINT('',(0.,-1.58)); +#46604 = VECTOR('',#46605,1.); +#46605 = DIRECTION('',(1.,0.)); +#46606 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46607 = ORIENTED_EDGE('',*,*,#46608,.F.); +#46608 = EDGE_CURVE('',#46609,#46586,#46611,.T.); +#46609 = VERTEX_POINT('',#46610); +#46610 = CARTESIAN_POINT('',(136.474877,-50.935066,1.58)); +#46611 = SURFACE_CURVE('',#46612,(#46616,#46623),.PCURVE_S1.); +#46612 = LINE('',#46613,#46614); +#46613 = CARTESIAN_POINT('',(136.474877,-50.935066,1.58)); +#46614 = VECTOR('',#46615,1.); +#46615 = DIRECTION('',(0.422618844039,0.906307515506,0.)); +#46616 = PCURVE('',#40674,#46617); +#46617 = DEFINITIONAL_REPRESENTATION('',(#46618),#46622); +#46618 = LINE('',#46619,#46620); +#46619 = CARTESIAN_POINT('',(16.173614067017,38.184709313404)); +#46620 = VECTOR('',#46621,1.); +#46621 = DIRECTION('',(-0.422618844039,0.906307515506)); +#46622 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46623 = PCURVE('',#43596,#46624); +#46624 = DEFINITIONAL_REPRESENTATION('',(#46625),#46629); +#46625 = LINE('',#46626,#46627); +#46626 = CARTESIAN_POINT('',(0.,-1.58)); +#46627 = VECTOR('',#46628,1.); +#46628 = DIRECTION('',(1.,0.)); +#46629 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46630 = ORIENTED_EDGE('',*,*,#46631,.F.); +#46631 = EDGE_CURVE('',#46632,#46609,#46634,.T.); +#46632 = VERTEX_POINT('',#46633); +#46633 = CARTESIAN_POINT('',(136.413972,-51.162368,1.58)); +#46634 = SURFACE_CURVE('',#46635,(#46639,#46646),.PCURVE_S1.); +#46635 = LINE('',#46636,#46637); +#46636 = CARTESIAN_POINT('',(136.413972,-51.162368,1.58)); +#46637 = VECTOR('',#46638,1.); +#46638 = DIRECTION('',(0.25881750936,0.965926237789,0.)); +#46639 = PCURVE('',#40674,#46640); +#46640 = DEFINITIONAL_REPRESENTATION('',(#46641),#46645); +#46641 = LINE('',#46642,#46643); +#46642 = CARTESIAN_POINT('',(16.234519067017,37.957407313404)); +#46643 = VECTOR('',#46644,1.); +#46644 = DIRECTION('',(-0.25881750936,0.965926237789)); +#46645 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46646 = PCURVE('',#43624,#46647); +#46647 = DEFINITIONAL_REPRESENTATION('',(#46648),#46652); +#46648 = LINE('',#46649,#46650); +#46649 = CARTESIAN_POINT('',(0.,-1.58)); +#46650 = VECTOR('',#46651,1.); +#46651 = DIRECTION('',(1.,0.)); +#46652 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46653 = ORIENTED_EDGE('',*,*,#46654,.F.); +#46654 = EDGE_CURVE('',#46655,#46632,#46657,.T.); +#46655 = VERTEX_POINT('',#46656); +#46656 = CARTESIAN_POINT('',(136.393462,-51.396793,1.58)); +#46657 = SURFACE_CURVE('',#46658,(#46662,#46669),.PCURVE_S1.); +#46658 = LINE('',#46659,#46660); +#46659 = CARTESIAN_POINT('',(136.393462,-51.396793,1.58)); +#46660 = VECTOR('',#46661,1.); +#46661 = DIRECTION('',(8.715772507518E-02,0.996194524659,0.)); +#46662 = PCURVE('',#40674,#46663); +#46663 = DEFINITIONAL_REPRESENTATION('',(#46664),#46668); +#46664 = LINE('',#46665,#46666); +#46665 = CARTESIAN_POINT('',(16.255029067017,37.722982313404)); +#46666 = VECTOR('',#46667,1.); +#46667 = DIRECTION('',(-8.715772507518E-02,0.996194524659)); +#46668 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46669 = PCURVE('',#43652,#46670); +#46670 = DEFINITIONAL_REPRESENTATION('',(#46671),#46675); +#46671 = LINE('',#46672,#46673); +#46672 = CARTESIAN_POINT('',(0.,-1.58)); +#46673 = VECTOR('',#46674,1.); +#46674 = DIRECTION('',(1.,0.)); +#46675 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46676 = ORIENTED_EDGE('',*,*,#46677,.F.); +#46677 = EDGE_CURVE('',#46678,#46655,#46680,.T.); +#46678 = VERTEX_POINT('',#46679); +#46679 = CARTESIAN_POINT('',(136.413972,-51.631218,1.58)); +#46680 = SURFACE_CURVE('',#46681,(#46685,#46692),.PCURVE_S1.); +#46681 = LINE('',#46682,#46683); +#46682 = CARTESIAN_POINT('',(136.413972,-51.631218,1.58)); +#46683 = VECTOR('',#46684,1.); +#46684 = DIRECTION('',(-8.715772507518E-02,0.996194524659,0.)); +#46685 = PCURVE('',#40674,#46686); +#46686 = DEFINITIONAL_REPRESENTATION('',(#46687),#46691); +#46687 = LINE('',#46688,#46689); +#46688 = CARTESIAN_POINT('',(16.234519067017,37.488557313404)); +#46689 = VECTOR('',#46690,1.); +#46690 = DIRECTION('',(8.715772507518E-02,0.996194524659)); +#46691 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46692 = PCURVE('',#43680,#46693); +#46693 = DEFINITIONAL_REPRESENTATION('',(#46694),#46698); +#46694 = LINE('',#46695,#46696); +#46695 = CARTESIAN_POINT('',(0.,-1.58)); +#46696 = VECTOR('',#46697,1.); +#46697 = DIRECTION('',(1.,0.)); +#46698 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46699 = ORIENTED_EDGE('',*,*,#46700,.F.); +#46700 = EDGE_CURVE('',#46701,#46678,#46703,.T.); +#46701 = VERTEX_POINT('',#46702); +#46702 = CARTESIAN_POINT('',(136.474877,-51.85852,1.58)); +#46703 = SURFACE_CURVE('',#46704,(#46708,#46715),.PCURVE_S1.); +#46704 = LINE('',#46705,#46706); +#46705 = CARTESIAN_POINT('',(136.474877,-51.85852,1.58)); +#46706 = VECTOR('',#46707,1.); +#46707 = DIRECTION('',(-0.25881750936,0.965926237789,0.)); +#46708 = PCURVE('',#40674,#46709); +#46709 = DEFINITIONAL_REPRESENTATION('',(#46710),#46714); +#46710 = LINE('',#46711,#46712); +#46711 = CARTESIAN_POINT('',(16.173614067017,37.261255313404)); +#46712 = VECTOR('',#46713,1.); +#46713 = DIRECTION('',(0.25881750936,0.965926237789)); +#46714 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46715 = PCURVE('',#43708,#46716); +#46716 = DEFINITIONAL_REPRESENTATION('',(#46717),#46721); +#46717 = LINE('',#46718,#46719); +#46718 = CARTESIAN_POINT('',(0.,-1.58)); +#46719 = VECTOR('',#46720,1.); +#46720 = DIRECTION('',(1.,0.)); +#46721 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46722 = ORIENTED_EDGE('',*,*,#46723,.F.); +#46723 = EDGE_CURVE('',#46724,#46701,#46726,.T.); +#46724 = VERTEX_POINT('',#46725); +#46725 = CARTESIAN_POINT('',(136.574328,-52.071793,1.58)); +#46726 = SURFACE_CURVE('',#46727,(#46731,#46738),.PCURVE_S1.); +#46727 = LINE('',#46728,#46729); +#46728 = CARTESIAN_POINT('',(136.574328,-52.071793,1.58)); +#46729 = VECTOR('',#46730,1.); +#46730 = DIRECTION('',(-0.422618844039,0.906307515506,0.)); +#46731 = PCURVE('',#40674,#46732); +#46732 = DEFINITIONAL_REPRESENTATION('',(#46733),#46737); +#46733 = LINE('',#46734,#46735); +#46734 = CARTESIAN_POINT('',(16.074163067017,37.047982313404)); +#46735 = VECTOR('',#46736,1.); +#46736 = DIRECTION('',(0.422618844039,0.906307515506)); +#46737 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46738 = PCURVE('',#43736,#46739); +#46739 = DEFINITIONAL_REPRESENTATION('',(#46740),#46744); +#46740 = LINE('',#46741,#46742); +#46741 = CARTESIAN_POINT('',(0.,-1.58)); +#46742 = VECTOR('',#46743,1.); +#46743 = DIRECTION('',(1.,0.)); +#46744 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46745 = ORIENTED_EDGE('',*,*,#46746,.F.); +#46746 = EDGE_CURVE('',#46747,#46724,#46749,.T.); +#46747 = VERTEX_POINT('',#46748); +#46748 = CARTESIAN_POINT('',(136.709302,-52.264556,1.58)); +#46749 = SURFACE_CURVE('',#46750,(#46754,#46761),.PCURVE_S1.); +#46750 = LINE('',#46751,#46752); +#46751 = CARTESIAN_POINT('',(136.709302,-52.264556,1.58)); +#46752 = VECTOR('',#46753,1.); +#46753 = DIRECTION('',(-0.573576134984,0.819152255308,0.)); +#46754 = PCURVE('',#40674,#46755); +#46755 = DEFINITIONAL_REPRESENTATION('',(#46756),#46760); +#46756 = LINE('',#46757,#46758); +#46757 = CARTESIAN_POINT('',(15.939189067017,36.855219313404)); +#46758 = VECTOR('',#46759,1.); +#46759 = DIRECTION('',(0.573576134984,0.819152255308)); +#46760 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46761 = PCURVE('',#43764,#46762); +#46762 = DEFINITIONAL_REPRESENTATION('',(#46763),#46767); +#46763 = LINE('',#46764,#46765); +#46764 = CARTESIAN_POINT('',(0.,-1.58)); +#46765 = VECTOR('',#46766,1.); +#46766 = DIRECTION('',(1.,0.)); +#46767 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46768 = ORIENTED_EDGE('',*,*,#46769,.F.); +#46769 = EDGE_CURVE('',#46770,#46747,#46772,.T.); +#46770 = VERTEX_POINT('',#46771); +#46771 = CARTESIAN_POINT('',(136.875699,-52.430953,1.58)); +#46772 = SURFACE_CURVE('',#46773,(#46777,#46784),.PCURVE_S1.); +#46773 = LINE('',#46774,#46775); +#46774 = CARTESIAN_POINT('',(136.875699,-52.430953,1.58)); +#46775 = VECTOR('',#46776,1.); +#46776 = DIRECTION('',(-0.707106781187,0.707106781187,0.)); +#46777 = PCURVE('',#40674,#46778); +#46778 = DEFINITIONAL_REPRESENTATION('',(#46779),#46783); +#46779 = LINE('',#46780,#46781); +#46780 = CARTESIAN_POINT('',(15.772792067017,36.688822313404)); +#46781 = VECTOR('',#46782,1.); +#46782 = DIRECTION('',(0.707106781187,0.707106781187)); +#46783 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46784 = PCURVE('',#43792,#46785); +#46785 = DEFINITIONAL_REPRESENTATION('',(#46786),#46790); +#46786 = LINE('',#46787,#46788); +#46787 = CARTESIAN_POINT('',(0.,-1.58)); +#46788 = VECTOR('',#46789,1.); +#46789 = DIRECTION('',(1.,0.)); +#46790 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46791 = ORIENTED_EDGE('',*,*,#46792,.F.); +#46792 = EDGE_CURVE('',#46793,#46770,#46795,.T.); +#46793 = VERTEX_POINT('',#46794); +#46794 = CARTESIAN_POINT('',(137.068462,-52.565927,1.58)); +#46795 = SURFACE_CURVE('',#46796,(#46800,#46807),.PCURVE_S1.); +#46796 = LINE('',#46797,#46798); +#46797 = CARTESIAN_POINT('',(137.068462,-52.565927,1.58)); +#46798 = VECTOR('',#46799,1.); +#46799 = DIRECTION('',(-0.819152255308,0.573576134984,0.)); +#46800 = PCURVE('',#40674,#46801); +#46801 = DEFINITIONAL_REPRESENTATION('',(#46802),#46806); +#46802 = LINE('',#46803,#46804); +#46803 = CARTESIAN_POINT('',(15.580029067017,36.553848313404)); +#46804 = VECTOR('',#46805,1.); +#46805 = DIRECTION('',(0.819152255308,0.573576134984)); +#46806 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46807 = PCURVE('',#43820,#46808); +#46808 = DEFINITIONAL_REPRESENTATION('',(#46809),#46813); +#46809 = LINE('',#46810,#46811); +#46810 = CARTESIAN_POINT('',(0.,-1.58)); +#46811 = VECTOR('',#46812,1.); +#46812 = DIRECTION('',(1.,0.)); +#46813 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46814 = ORIENTED_EDGE('',*,*,#46815,.F.); +#46815 = EDGE_CURVE('',#46816,#46793,#46818,.T.); +#46816 = VERTEX_POINT('',#46817); +#46817 = CARTESIAN_POINT('',(137.281735,-52.665378,1.58)); +#46818 = SURFACE_CURVE('',#46819,(#46823,#46830),.PCURVE_S1.); +#46819 = LINE('',#46820,#46821); +#46820 = CARTESIAN_POINT('',(137.281735,-52.665378,1.58)); +#46821 = VECTOR('',#46822,1.); +#46822 = DIRECTION('',(-0.906307515506,0.422618844039,0.)); +#46823 = PCURVE('',#40674,#46824); +#46824 = DEFINITIONAL_REPRESENTATION('',(#46825),#46829); +#46825 = LINE('',#46826,#46827); +#46826 = CARTESIAN_POINT('',(15.366756067017,36.454397313404)); +#46827 = VECTOR('',#46828,1.); +#46828 = DIRECTION('',(0.906307515506,0.422618844039)); +#46829 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46830 = PCURVE('',#43848,#46831); +#46831 = DEFINITIONAL_REPRESENTATION('',(#46832),#46836); +#46832 = LINE('',#46833,#46834); +#46833 = CARTESIAN_POINT('',(0.,-1.58)); +#46834 = VECTOR('',#46835,1.); +#46835 = DIRECTION('',(1.,0.)); +#46836 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46837 = ORIENTED_EDGE('',*,*,#46838,.F.); +#46838 = EDGE_CURVE('',#46839,#46816,#46841,.T.); +#46839 = VERTEX_POINT('',#46840); +#46840 = CARTESIAN_POINT('',(137.509037,-52.726283,1.58)); +#46841 = SURFACE_CURVE('',#46842,(#46846,#46853),.PCURVE_S1.); +#46842 = LINE('',#46843,#46844); +#46843 = CARTESIAN_POINT('',(137.509037,-52.726283,1.58)); +#46844 = VECTOR('',#46845,1.); +#46845 = DIRECTION('',(-0.965926237789,0.25881750936,0.)); +#46846 = PCURVE('',#40674,#46847); +#46847 = DEFINITIONAL_REPRESENTATION('',(#46848),#46852); +#46848 = LINE('',#46849,#46850); +#46849 = CARTESIAN_POINT('',(15.139454067017,36.393492313404)); +#46850 = VECTOR('',#46851,1.); +#46851 = DIRECTION('',(0.965926237789,0.25881750936)); +#46852 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46853 = PCURVE('',#43876,#46854); +#46854 = DEFINITIONAL_REPRESENTATION('',(#46855),#46859); +#46855 = LINE('',#46856,#46857); +#46856 = CARTESIAN_POINT('',(0.,-1.58)); +#46857 = VECTOR('',#46858,1.); +#46858 = DIRECTION('',(1.,0.)); +#46859 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46860 = ORIENTED_EDGE('',*,*,#46861,.F.); +#46861 = EDGE_CURVE('',#46862,#46839,#46864,.T.); +#46862 = VERTEX_POINT('',#46863); +#46863 = CARTESIAN_POINT('',(137.743462,-52.746793,1.58)); +#46864 = SURFACE_CURVE('',#46865,(#46869,#46876),.PCURVE_S1.); +#46865 = LINE('',#46866,#46867); +#46866 = CARTESIAN_POINT('',(137.743462,-52.746793,1.58)); +#46867 = VECTOR('',#46868,1.); +#46868 = DIRECTION('',(-0.996194524659,8.715772507515E-02,0.)); +#46869 = PCURVE('',#40674,#46870); +#46870 = DEFINITIONAL_REPRESENTATION('',(#46871),#46875); +#46871 = LINE('',#46872,#46873); +#46872 = CARTESIAN_POINT('',(14.905029067017,36.372982313404)); +#46873 = VECTOR('',#46874,1.); +#46874 = DIRECTION('',(0.996194524659,8.715772507515E-02)); +#46875 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46876 = PCURVE('',#43904,#46877); +#46877 = DEFINITIONAL_REPRESENTATION('',(#46878),#46882); +#46878 = LINE('',#46879,#46880); +#46879 = CARTESIAN_POINT('',(0.,-1.58)); +#46880 = VECTOR('',#46881,1.); +#46881 = DIRECTION('',(1.,0.)); +#46882 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46883 = ORIENTED_EDGE('',*,*,#46884,.F.); +#46884 = EDGE_CURVE('',#46885,#46862,#46887,.T.); +#46885 = VERTEX_POINT('',#46886); +#46886 = CARTESIAN_POINT('',(138.543462,-52.746793,1.58)); +#46887 = SURFACE_CURVE('',#46888,(#46892,#46899),.PCURVE_S1.); +#46888 = LINE('',#46889,#46890); +#46889 = CARTESIAN_POINT('',(138.543462,-52.746793,1.58)); +#46890 = VECTOR('',#46891,1.); +#46891 = DIRECTION('',(-1.,0.,0.)); +#46892 = PCURVE('',#40674,#46893); +#46893 = DEFINITIONAL_REPRESENTATION('',(#46894),#46898); +#46894 = LINE('',#46895,#46896); +#46895 = CARTESIAN_POINT('',(14.105029067017,36.372982313404)); +#46896 = VECTOR('',#46897,1.); +#46897 = DIRECTION('',(1.,0.)); +#46898 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46899 = PCURVE('',#43932,#46900); +#46900 = DEFINITIONAL_REPRESENTATION('',(#46901),#46905); +#46901 = LINE('',#46902,#46903); +#46902 = CARTESIAN_POINT('',(0.,-1.58)); +#46903 = VECTOR('',#46904,1.); +#46904 = DIRECTION('',(1.,0.)); +#46905 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46906 = ORIENTED_EDGE('',*,*,#46907,.F.); +#46907 = EDGE_CURVE('',#46908,#46885,#46910,.T.); +#46908 = VERTEX_POINT('',#46909); +#46909 = CARTESIAN_POINT('',(138.777887,-52.726283,1.58)); +#46910 = SURFACE_CURVE('',#46911,(#46915,#46922),.PCURVE_S1.); +#46911 = LINE('',#46912,#46913); +#46912 = CARTESIAN_POINT('',(138.777887,-52.726283,1.58)); +#46913 = VECTOR('',#46914,1.); +#46914 = DIRECTION('',(-0.996194524659,-8.715772507515E-02,0.)); +#46915 = PCURVE('',#40674,#46916); +#46916 = DEFINITIONAL_REPRESENTATION('',(#46917),#46921); +#46917 = LINE('',#46918,#46919); +#46918 = CARTESIAN_POINT('',(13.870604067017,36.393492313404)); +#46919 = VECTOR('',#46920,1.); +#46920 = DIRECTION('',(0.996194524659,-8.715772507515E-02)); +#46921 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46922 = PCURVE('',#43960,#46923); +#46923 = DEFINITIONAL_REPRESENTATION('',(#46924),#46928); +#46924 = LINE('',#46925,#46926); +#46925 = CARTESIAN_POINT('',(0.,-1.58)); +#46926 = VECTOR('',#46927,1.); +#46927 = DIRECTION('',(1.,0.)); +#46928 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46929 = ORIENTED_EDGE('',*,*,#46930,.F.); +#46930 = EDGE_CURVE('',#46931,#46908,#46933,.T.); +#46931 = VERTEX_POINT('',#46932); +#46932 = CARTESIAN_POINT('',(139.005189,-52.665378,1.58)); +#46933 = SURFACE_CURVE('',#46934,(#46938,#46945),.PCURVE_S1.); +#46934 = LINE('',#46935,#46936); +#46935 = CARTESIAN_POINT('',(139.005189,-52.665378,1.58)); +#46936 = VECTOR('',#46937,1.); +#46937 = DIRECTION('',(-0.965926237789,-0.25881750936,0.)); +#46938 = PCURVE('',#40674,#46939); +#46939 = DEFINITIONAL_REPRESENTATION('',(#46940),#46944); +#46940 = LINE('',#46941,#46942); +#46941 = CARTESIAN_POINT('',(13.643302067017,36.454397313404)); +#46942 = VECTOR('',#46943,1.); +#46943 = DIRECTION('',(0.965926237789,-0.25881750936)); +#46944 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46945 = PCURVE('',#43988,#46946); +#46946 = DEFINITIONAL_REPRESENTATION('',(#46947),#46951); +#46947 = LINE('',#46948,#46949); +#46948 = CARTESIAN_POINT('',(0.,-1.58)); +#46949 = VECTOR('',#46950,1.); +#46950 = DIRECTION('',(1.,0.)); +#46951 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46952 = ORIENTED_EDGE('',*,*,#46953,.F.); +#46953 = EDGE_CURVE('',#46954,#46931,#46956,.T.); +#46954 = VERTEX_POINT('',#46955); +#46955 = CARTESIAN_POINT('',(139.218462,-52.565927,1.58)); +#46956 = SURFACE_CURVE('',#46957,(#46961,#46968),.PCURVE_S1.); +#46957 = LINE('',#46958,#46959); +#46958 = CARTESIAN_POINT('',(139.218462,-52.565927,1.58)); +#46959 = VECTOR('',#46960,1.); +#46960 = DIRECTION('',(-0.906307515506,-0.422618844039,0.)); +#46961 = PCURVE('',#40674,#46962); +#46962 = DEFINITIONAL_REPRESENTATION('',(#46963),#46967); +#46963 = LINE('',#46964,#46965); +#46964 = CARTESIAN_POINT('',(13.430029067017,36.553848313404)); +#46965 = VECTOR('',#46966,1.); +#46966 = DIRECTION('',(0.906307515506,-0.422618844039)); +#46967 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46968 = PCURVE('',#44016,#46969); +#46969 = DEFINITIONAL_REPRESENTATION('',(#46970),#46974); +#46970 = LINE('',#46971,#46972); +#46971 = CARTESIAN_POINT('',(0.,-1.58)); +#46972 = VECTOR('',#46973,1.); +#46973 = DIRECTION('',(1.,0.)); +#46974 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46975 = ORIENTED_EDGE('',*,*,#46976,.F.); +#46976 = EDGE_CURVE('',#46977,#46954,#46979,.T.); +#46977 = VERTEX_POINT('',#46978); +#46978 = CARTESIAN_POINT('',(139.411225,-52.430953,1.58)); +#46979 = SURFACE_CURVE('',#46980,(#46984,#46991),.PCURVE_S1.); +#46980 = LINE('',#46981,#46982); +#46981 = CARTESIAN_POINT('',(139.411225,-52.430953,1.58)); +#46982 = VECTOR('',#46983,1.); +#46983 = DIRECTION('',(-0.819152255308,-0.573576134984,0.)); +#46984 = PCURVE('',#40674,#46985); +#46985 = DEFINITIONAL_REPRESENTATION('',(#46986),#46990); +#46986 = LINE('',#46987,#46988); +#46987 = CARTESIAN_POINT('',(13.237266067017,36.688822313404)); +#46988 = VECTOR('',#46989,1.); +#46989 = DIRECTION('',(0.819152255308,-0.573576134984)); +#46990 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46991 = PCURVE('',#44044,#46992); +#46992 = DEFINITIONAL_REPRESENTATION('',(#46993),#46997); +#46993 = LINE('',#46994,#46995); +#46994 = CARTESIAN_POINT('',(0.,-1.58)); +#46995 = VECTOR('',#46996,1.); +#46996 = DIRECTION('',(1.,0.)); +#46997 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#46998 = ORIENTED_EDGE('',*,*,#46999,.F.); +#46999 = EDGE_CURVE('',#47000,#46977,#47002,.T.); +#47000 = VERTEX_POINT('',#47001); +#47001 = CARTESIAN_POINT('',(139.577622,-52.264556,1.58)); +#47002 = SURFACE_CURVE('',#47003,(#47007,#47014),.PCURVE_S1.); +#47003 = LINE('',#47004,#47005); +#47004 = CARTESIAN_POINT('',(139.577622,-52.264556,1.58)); +#47005 = VECTOR('',#47006,1.); +#47006 = DIRECTION('',(-0.707106781187,-0.707106781187,0.)); +#47007 = PCURVE('',#40674,#47008); +#47008 = DEFINITIONAL_REPRESENTATION('',(#47009),#47013); +#47009 = LINE('',#47010,#47011); +#47010 = CARTESIAN_POINT('',(13.070869067017,36.855219313404)); +#47011 = VECTOR('',#47012,1.); +#47012 = DIRECTION('',(0.707106781187,-0.707106781187)); +#47013 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47014 = PCURVE('',#44072,#47015); +#47015 = DEFINITIONAL_REPRESENTATION('',(#47016),#47020); +#47016 = LINE('',#47017,#47018); +#47017 = CARTESIAN_POINT('',(0.,-1.58)); +#47018 = VECTOR('',#47019,1.); +#47019 = DIRECTION('',(1.,0.)); +#47020 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47021 = ORIENTED_EDGE('',*,*,#47022,.F.); +#47022 = EDGE_CURVE('',#47023,#47000,#47025,.T.); +#47023 = VERTEX_POINT('',#47024); +#47024 = CARTESIAN_POINT('',(139.712596,-52.071793,1.58)); +#47025 = SURFACE_CURVE('',#47026,(#47030,#47037),.PCURVE_S1.); +#47026 = LINE('',#47027,#47028); +#47027 = CARTESIAN_POINT('',(139.712596,-52.071793,1.58)); +#47028 = VECTOR('',#47029,1.); +#47029 = DIRECTION('',(-0.573576134984,-0.819152255308,0.)); +#47030 = PCURVE('',#40674,#47031); +#47031 = DEFINITIONAL_REPRESENTATION('',(#47032),#47036); +#47032 = LINE('',#47033,#47034); +#47033 = CARTESIAN_POINT('',(12.935895067017,37.047982313404)); +#47034 = VECTOR('',#47035,1.); +#47035 = DIRECTION('',(0.573576134984,-0.819152255308)); +#47036 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47037 = PCURVE('',#44100,#47038); +#47038 = DEFINITIONAL_REPRESENTATION('',(#47039),#47043); +#47039 = LINE('',#47040,#47041); +#47040 = CARTESIAN_POINT('',(0.,-1.58)); +#47041 = VECTOR('',#47042,1.); +#47042 = DIRECTION('',(1.,0.)); +#47043 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47044 = ORIENTED_EDGE('',*,*,#47045,.F.); +#47045 = EDGE_CURVE('',#47046,#47023,#47048,.T.); +#47046 = VERTEX_POINT('',#47047); +#47047 = CARTESIAN_POINT('',(139.812047,-51.85852,1.58)); +#47048 = SURFACE_CURVE('',#47049,(#47053,#47060),.PCURVE_S1.); +#47049 = LINE('',#47050,#47051); +#47050 = CARTESIAN_POINT('',(139.812047,-51.85852,1.58)); +#47051 = VECTOR('',#47052,1.); +#47052 = DIRECTION('',(-0.422618844039,-0.906307515506,0.)); +#47053 = PCURVE('',#40674,#47054); +#47054 = DEFINITIONAL_REPRESENTATION('',(#47055),#47059); +#47055 = LINE('',#47056,#47057); +#47056 = CARTESIAN_POINT('',(12.836444067017,37.261255313404)); +#47057 = VECTOR('',#47058,1.); +#47058 = DIRECTION('',(0.422618844039,-0.906307515506)); +#47059 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47060 = PCURVE('',#44128,#47061); +#47061 = DEFINITIONAL_REPRESENTATION('',(#47062),#47066); +#47062 = LINE('',#47063,#47064); +#47063 = CARTESIAN_POINT('',(0.,-1.58)); +#47064 = VECTOR('',#47065,1.); +#47065 = DIRECTION('',(1.,0.)); +#47066 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47067 = ORIENTED_EDGE('',*,*,#47068,.F.); +#47068 = EDGE_CURVE('',#47069,#47046,#47071,.T.); +#47069 = VERTEX_POINT('',#47070); +#47070 = CARTESIAN_POINT('',(139.872952,-51.631218,1.58)); +#47071 = SURFACE_CURVE('',#47072,(#47076,#47083),.PCURVE_S1.); +#47072 = LINE('',#47073,#47074); +#47073 = CARTESIAN_POINT('',(139.872952,-51.631218,1.58)); +#47074 = VECTOR('',#47075,1.); +#47075 = DIRECTION('',(-0.25881750936,-0.965926237789,0.)); +#47076 = PCURVE('',#40674,#47077); +#47077 = DEFINITIONAL_REPRESENTATION('',(#47078),#47082); +#47078 = LINE('',#47079,#47080); +#47079 = CARTESIAN_POINT('',(12.775539067017,37.488557313404)); +#47080 = VECTOR('',#47081,1.); +#47081 = DIRECTION('',(0.25881750936,-0.965926237789)); +#47082 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47083 = PCURVE('',#44156,#47084); +#47084 = DEFINITIONAL_REPRESENTATION('',(#47085),#47089); +#47085 = LINE('',#47086,#47087); +#47086 = CARTESIAN_POINT('',(0.,-1.58)); +#47087 = VECTOR('',#47088,1.); +#47088 = DIRECTION('',(1.,0.)); +#47089 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47090 = ORIENTED_EDGE('',*,*,#47091,.F.); +#47091 = EDGE_CURVE('',#47092,#47069,#47094,.T.); +#47092 = VERTEX_POINT('',#47093); +#47093 = CARTESIAN_POINT('',(139.893462,-51.396793,1.58)); +#47094 = SURFACE_CURVE('',#47095,(#47099,#47106),.PCURVE_S1.); +#47095 = LINE('',#47096,#47097); +#47096 = CARTESIAN_POINT('',(139.893462,-51.396793,1.58)); +#47097 = VECTOR('',#47098,1.); +#47098 = DIRECTION('',(-8.715772507518E-02,-0.996194524659,0.)); +#47099 = PCURVE('',#40674,#47100); +#47100 = DEFINITIONAL_REPRESENTATION('',(#47101),#47105); +#47101 = LINE('',#47102,#47103); +#47102 = CARTESIAN_POINT('',(12.755029067017,37.722982313404)); +#47103 = VECTOR('',#47104,1.); +#47104 = DIRECTION('',(8.715772507518E-02,-0.996194524659)); +#47105 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47106 = PCURVE('',#44184,#47107); +#47107 = DEFINITIONAL_REPRESENTATION('',(#47108),#47112); +#47108 = LINE('',#47109,#47110); +#47109 = CARTESIAN_POINT('',(0.,-1.58)); +#47110 = VECTOR('',#47111,1.); +#47111 = DIRECTION('',(1.,0.)); +#47112 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47113 = ORIENTED_EDGE('',*,*,#47114,.F.); +#47114 = EDGE_CURVE('',#47115,#47092,#47117,.T.); +#47115 = VERTEX_POINT('',#47116); +#47116 = CARTESIAN_POINT('',(139.872952,-51.162368,1.58)); +#47117 = SURFACE_CURVE('',#47118,(#47122,#47129),.PCURVE_S1.); +#47118 = LINE('',#47119,#47120); +#47119 = CARTESIAN_POINT('',(139.872952,-51.162368,1.58)); +#47120 = VECTOR('',#47121,1.); +#47121 = DIRECTION('',(8.715772507518E-02,-0.996194524659,0.)); +#47122 = PCURVE('',#40674,#47123); +#47123 = DEFINITIONAL_REPRESENTATION('',(#47124),#47128); +#47124 = LINE('',#47125,#47126); +#47125 = CARTESIAN_POINT('',(12.775539067017,37.957407313404)); +#47126 = VECTOR('',#47127,1.); +#47127 = DIRECTION('',(-8.715772507518E-02,-0.996194524659)); +#47128 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47129 = PCURVE('',#44212,#47130); +#47130 = DEFINITIONAL_REPRESENTATION('',(#47131),#47135); +#47131 = LINE('',#47132,#47133); +#47132 = CARTESIAN_POINT('',(0.,-1.58)); +#47133 = VECTOR('',#47134,1.); +#47134 = DIRECTION('',(1.,0.)); +#47135 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47136 = ORIENTED_EDGE('',*,*,#47137,.F.); +#47137 = EDGE_CURVE('',#47138,#47115,#47140,.T.); +#47138 = VERTEX_POINT('',#47139); +#47139 = CARTESIAN_POINT('',(139.812047,-50.935066,1.58)); +#47140 = SURFACE_CURVE('',#47141,(#47145,#47152),.PCURVE_S1.); +#47141 = LINE('',#47142,#47143); +#47142 = CARTESIAN_POINT('',(139.812047,-50.935066,1.58)); +#47143 = VECTOR('',#47144,1.); +#47144 = DIRECTION('',(0.25881750936,-0.965926237789,0.)); +#47145 = PCURVE('',#40674,#47146); +#47146 = DEFINITIONAL_REPRESENTATION('',(#47147),#47151); +#47147 = LINE('',#47148,#47149); +#47148 = CARTESIAN_POINT('',(12.836444067017,38.184709313404)); +#47149 = VECTOR('',#47150,1.); +#47150 = DIRECTION('',(-0.25881750936,-0.965926237789)); +#47151 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47152 = PCURVE('',#44240,#47153); +#47153 = DEFINITIONAL_REPRESENTATION('',(#47154),#47158); +#47154 = LINE('',#47155,#47156); +#47155 = CARTESIAN_POINT('',(0.,-1.58)); +#47156 = VECTOR('',#47157,1.); +#47157 = DIRECTION('',(1.,0.)); +#47158 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47159 = ORIENTED_EDGE('',*,*,#47160,.F.); +#47160 = EDGE_CURVE('',#47161,#47138,#47163,.T.); +#47161 = VERTEX_POINT('',#47162); +#47162 = CARTESIAN_POINT('',(139.712596,-50.721793,1.58)); +#47163 = SURFACE_CURVE('',#47164,(#47168,#47175),.PCURVE_S1.); +#47164 = LINE('',#47165,#47166); +#47165 = CARTESIAN_POINT('',(139.712596,-50.721793,1.58)); +#47166 = VECTOR('',#47167,1.); +#47167 = DIRECTION('',(0.422618844039,-0.906307515506,0.)); +#47168 = PCURVE('',#40674,#47169); +#47169 = DEFINITIONAL_REPRESENTATION('',(#47170),#47174); +#47170 = LINE('',#47171,#47172); +#47171 = CARTESIAN_POINT('',(12.935895067017,38.397982313404)); +#47172 = VECTOR('',#47173,1.); +#47173 = DIRECTION('',(-0.422618844039,-0.906307515506)); +#47174 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47175 = PCURVE('',#44268,#47176); +#47176 = DEFINITIONAL_REPRESENTATION('',(#47177),#47181); +#47177 = LINE('',#47178,#47179); +#47178 = CARTESIAN_POINT('',(0.,-1.58)); +#47179 = VECTOR('',#47180,1.); +#47180 = DIRECTION('',(1.,0.)); +#47181 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47182 = ORIENTED_EDGE('',*,*,#47183,.F.); +#47183 = EDGE_CURVE('',#47184,#47161,#47186,.T.); +#47184 = VERTEX_POINT('',#47185); +#47185 = CARTESIAN_POINT('',(139.577622,-50.52903,1.58)); +#47186 = SURFACE_CURVE('',#47187,(#47191,#47198),.PCURVE_S1.); +#47187 = LINE('',#47188,#47189); +#47188 = CARTESIAN_POINT('',(139.577622,-50.52903,1.58)); +#47189 = VECTOR('',#47190,1.); +#47190 = DIRECTION('',(0.573576134984,-0.819152255308,0.)); +#47191 = PCURVE('',#40674,#47192); +#47192 = DEFINITIONAL_REPRESENTATION('',(#47193),#47197); +#47193 = LINE('',#47194,#47195); +#47194 = CARTESIAN_POINT('',(13.070869067017,38.590745313404)); +#47195 = VECTOR('',#47196,1.); +#47196 = DIRECTION('',(-0.573576134984,-0.819152255308)); +#47197 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47198 = PCURVE('',#44296,#47199); +#47199 = DEFINITIONAL_REPRESENTATION('',(#47200),#47204); +#47200 = LINE('',#47201,#47202); +#47201 = CARTESIAN_POINT('',(0.,-1.58)); +#47202 = VECTOR('',#47203,1.); +#47203 = DIRECTION('',(1.,0.)); +#47204 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47205 = ORIENTED_EDGE('',*,*,#47206,.F.); +#47206 = EDGE_CURVE('',#47207,#47184,#47209,.T.); +#47207 = VERTEX_POINT('',#47208); +#47208 = CARTESIAN_POINT('',(139.411225,-50.362633,1.58)); +#47209 = SURFACE_CURVE('',#47210,(#47214,#47221),.PCURVE_S1.); +#47210 = LINE('',#47211,#47212); +#47211 = CARTESIAN_POINT('',(139.411225,-50.362633,1.58)); +#47212 = VECTOR('',#47213,1.); +#47213 = DIRECTION('',(0.707106781187,-0.707106781187,0.)); +#47214 = PCURVE('',#40674,#47215); +#47215 = DEFINITIONAL_REPRESENTATION('',(#47216),#47220); +#47216 = LINE('',#47217,#47218); +#47217 = CARTESIAN_POINT('',(13.237266067017,38.757142313404)); +#47218 = VECTOR('',#47219,1.); +#47219 = DIRECTION('',(-0.707106781187,-0.707106781187)); +#47220 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47221 = PCURVE('',#44324,#47222); +#47222 = DEFINITIONAL_REPRESENTATION('',(#47223),#47227); +#47223 = LINE('',#47224,#47225); +#47224 = CARTESIAN_POINT('',(0.,-1.58)); +#47225 = VECTOR('',#47226,1.); +#47226 = DIRECTION('',(1.,0.)); +#47227 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47228 = ORIENTED_EDGE('',*,*,#47229,.F.); +#47229 = EDGE_CURVE('',#47230,#47207,#47232,.T.); +#47230 = VERTEX_POINT('',#47231); +#47231 = CARTESIAN_POINT('',(139.218462,-50.227659,1.58)); +#47232 = SURFACE_CURVE('',#47233,(#47237,#47244),.PCURVE_S1.); +#47233 = LINE('',#47234,#47235); +#47234 = CARTESIAN_POINT('',(139.218462,-50.227659,1.58)); +#47235 = VECTOR('',#47236,1.); +#47236 = DIRECTION('',(0.819152255308,-0.573576134984,0.)); +#47237 = PCURVE('',#40674,#47238); +#47238 = DEFINITIONAL_REPRESENTATION('',(#47239),#47243); +#47239 = LINE('',#47240,#47241); +#47240 = CARTESIAN_POINT('',(13.430029067017,38.892116313404)); +#47241 = VECTOR('',#47242,1.); +#47242 = DIRECTION('',(-0.819152255308,-0.573576134984)); +#47243 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47244 = PCURVE('',#44352,#47245); +#47245 = DEFINITIONAL_REPRESENTATION('',(#47246),#47250); +#47246 = LINE('',#47247,#47248); +#47247 = CARTESIAN_POINT('',(0.,-1.58)); +#47248 = VECTOR('',#47249,1.); +#47249 = DIRECTION('',(1.,0.)); +#47250 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47251 = ORIENTED_EDGE('',*,*,#47252,.F.); +#47252 = EDGE_CURVE('',#46402,#47230,#47253,.T.); +#47253 = SURFACE_CURVE('',#47254,(#47258,#47265),.PCURVE_S1.); +#47254 = LINE('',#47255,#47256); +#47255 = CARTESIAN_POINT('',(139.005189,-50.128208,1.58)); +#47256 = VECTOR('',#47257,1.); +#47257 = DIRECTION('',(0.906307515506,-0.422618844039,0.)); +#47258 = PCURVE('',#40674,#47259); +#47259 = DEFINITIONAL_REPRESENTATION('',(#47260),#47264); +#47260 = LINE('',#47261,#47262); +#47261 = CARTESIAN_POINT('',(13.643302067017,38.991567313404)); +#47262 = VECTOR('',#47263,1.); +#47263 = DIRECTION('',(-0.906307515506,-0.422618844039)); +#47264 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47265 = PCURVE('',#44378,#47266); +#47266 = DEFINITIONAL_REPRESENTATION('',(#47267),#47271); +#47267 = LINE('',#47268,#47269); +#47268 = CARTESIAN_POINT('',(0.,-1.58)); +#47269 = VECTOR('',#47270,1.); +#47270 = DIRECTION('',(1.,0.)); +#47271 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47272 = ADVANCED_FACE('',(#47273),#40761,.T.); +#47273 = FACE_BOUND('',#47274,.T.); +#47274 = EDGE_LOOP('',(#47275,#47296,#47297,#47298)); +#47275 = ORIENTED_EDGE('',*,*,#47276,.T.); +#47276 = EDGE_CURVE('',#42209,#45477,#47277,.T.); +#47277 = SURFACE_CURVE('',#47278,(#47282,#47289),.PCURVE_S1.); +#47278 = LINE('',#47279,#47280); +#47279 = CARTESIAN_POINT('',(133.470072,-48.096786,0.)); +#47280 = VECTOR('',#47281,1.); +#47281 = DIRECTION('',(0.,0.,1.)); +#47282 = PCURVE('',#40761,#47283); +#47283 = DEFINITIONAL_REPRESENTATION('',(#47284),#47288); +#47284 = LINE('',#47285,#47286); +#47285 = CARTESIAN_POINT('',(0.,0.)); +#47286 = VECTOR('',#47287,1.); +#47287 = DIRECTION('',(0.,-1.)); +#47288 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47289 = PCURVE('',#42224,#47290); +#47290 = DEFINITIONAL_REPRESENTATION('',(#47291),#47295); +#47291 = LINE('',#47292,#47293); +#47292 = CARTESIAN_POINT('',(0.222480441138,0.)); +#47293 = VECTOR('',#47294,1.); +#47294 = DIRECTION('',(0.,-1.)); +#47295 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47296 = ORIENTED_EDGE('',*,*,#45499,.T.); +#47297 = ORIENTED_EDGE('',*,*,#40743,.F.); +#47298 = ORIENTED_EDGE('',*,*,#42236,.F.); +#47299 = ADVANCED_FACE('',(#47300),#40859,.T.); +#47300 = FACE_BOUND('',#47301,.T.); +#47301 = EDGE_LOOP('',(#47302,#47303,#47304,#47325)); +#47302 = ORIENTED_EDGE('',*,*,#40843,.T.); +#47303 = ORIENTED_EDGE('',*,*,#44395,.T.); +#47304 = ORIENTED_EDGE('',*,*,#47305,.F.); +#47305 = EDGE_CURVE('',#40898,#44396,#47306,.T.); +#47306 = SURFACE_CURVE('',#47307,(#47311,#47318),.PCURVE_S1.); +#47307 = LINE('',#47308,#47309); +#47308 = CARTESIAN_POINT('',(172.636756,-48.395392,0.)); +#47309 = VECTOR('',#47310,1.); +#47310 = DIRECTION('',(0.,0.,1.)); +#47311 = PCURVE('',#40859,#47312); +#47312 = DEFINITIONAL_REPRESENTATION('',(#47313),#47317); +#47313 = LINE('',#47314,#47315); +#47314 = CARTESIAN_POINT('',(0.222479060626,0.)); +#47315 = VECTOR('',#47316,1.); +#47316 = DIRECTION('',(0.,-1.)); +#47317 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47318 = PCURVE('',#40936,#47319); +#47319 = DEFINITIONAL_REPRESENTATION('',(#47320),#47324); +#47320 = LINE('',#47321,#47322); +#47321 = CARTESIAN_POINT('',(0.,0.)); +#47322 = VECTOR('',#47323,1.); +#47323 = DIRECTION('',(0.,-1.)); +#47324 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47325 = ORIENTED_EDGE('',*,*,#40897,.F.); +#47326 = ADVANCED_FACE('',(#47327),#42224,.T.); +#47327 = FACE_BOUND('',#47328,.T.); +#47328 = EDGE_LOOP('',(#47329,#47350,#47351,#47352)); +#47329 = ORIENTED_EDGE('',*,*,#47330,.T.); +#47330 = EDGE_CURVE('',#42181,#45454,#47331,.T.); +#47331 = SURFACE_CURVE('',#47332,(#47336,#47343),.PCURVE_S1.); +#47332 = LINE('',#47333,#47334); +#47333 = CARTESIAN_POINT('',(133.248439,-48.116186,0.)); +#47334 = VECTOR('',#47335,1.); +#47335 = DIRECTION('',(0.,0.,1.)); +#47336 = PCURVE('',#42224,#47337); +#47337 = DEFINITIONAL_REPRESENTATION('',(#47338),#47342); +#47338 = LINE('',#47339,#47340); +#47339 = CARTESIAN_POINT('',(0.,0.)); +#47340 = VECTOR('',#47341,1.); +#47341 = DIRECTION('',(0.,-1.)); +#47342 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47343 = PCURVE('',#42196,#47344); +#47344 = DEFINITIONAL_REPRESENTATION('',(#47345),#47349); +#47345 = LINE('',#47346,#47347); +#47346 = CARTESIAN_POINT('',(0.222479035961,0.)); +#47347 = VECTOR('',#47348,1.); +#47348 = DIRECTION('',(0.,-1.)); +#47349 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47350 = ORIENTED_EDGE('',*,*,#45476,.T.); +#47351 = ORIENTED_EDGE('',*,*,#47276,.F.); +#47352 = ORIENTED_EDGE('',*,*,#42208,.F.); +#47353 = ADVANCED_FACE('',(#47354),#40936,.T.); +#47354 = FACE_BOUND('',#47355,.T.); +#47355 = EDGE_LOOP('',(#47356,#47357,#47358,#47379)); +#47356 = ORIENTED_EDGE('',*,*,#47305,.T.); +#47357 = ORIENTED_EDGE('',*,*,#44418,.T.); +#47358 = ORIENTED_EDGE('',*,*,#47359,.F.); +#47359 = EDGE_CURVE('',#40921,#44419,#47360,.T.); +#47360 = SURFACE_CURVE('',#47361,(#47365,#47372),.PCURVE_S1.); +#47361 = LINE('',#47362,#47363); +#47362 = CARTESIAN_POINT('',(172.794071,-48.552709,0.)); +#47363 = VECTOR('',#47364,1.); +#47364 = DIRECTION('',(0.,0.,1.)); +#47365 = PCURVE('',#40936,#47366); +#47366 = DEFINITIONAL_REPRESENTATION('',(#47367),#47371); +#47367 = LINE('',#47368,#47369); +#47368 = CARTESIAN_POINT('',(0.222478420783,0.)); +#47369 = VECTOR('',#47370,1.); +#47370 = DIRECTION('',(0.,-1.)); +#47371 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47372 = PCURVE('',#40964,#47373); +#47373 = DEFINITIONAL_REPRESENTATION('',(#47374),#47378); +#47374 = LINE('',#47375,#47376); +#47375 = CARTESIAN_POINT('',(0.,0.)); +#47376 = VECTOR('',#47377,1.); +#47377 = DIRECTION('',(0.,-1.)); +#47378 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47379 = ORIENTED_EDGE('',*,*,#40920,.F.); +#47380 = ADVANCED_FACE('',(#47381),#42196,.T.); +#47381 = FACE_BOUND('',#47382,.T.); +#47382 = EDGE_LOOP('',(#47383,#47404,#47405,#47406)); +#47383 = ORIENTED_EDGE('',*,*,#47384,.T.); +#47384 = EDGE_CURVE('',#42153,#45431,#47385,.T.); +#47385 = SURFACE_CURVE('',#47386,(#47390,#47397),.PCURVE_S1.); +#47386 = LINE('',#47387,#47388); +#47387 = CARTESIAN_POINT('',(133.03354,-48.173765,0.)); +#47388 = VECTOR('',#47389,1.); +#47389 = DIRECTION('',(0.,0.,1.)); +#47390 = PCURVE('',#42196,#47391); +#47391 = DEFINITIONAL_REPRESENTATION('',(#47392),#47396); +#47392 = LINE('',#47393,#47394); +#47393 = CARTESIAN_POINT('',(0.,0.)); +#47394 = VECTOR('',#47395,1.); +#47395 = DIRECTION('',(0.,-1.)); +#47396 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47397 = PCURVE('',#42168,#47398); +#47398 = DEFINITIONAL_REPRESENTATION('',(#47399),#47403); +#47399 = LINE('',#47400,#47401); +#47400 = CARTESIAN_POINT('',(0.222479268556,0.)); +#47401 = VECTOR('',#47402,1.); +#47402 = DIRECTION('',(0.,-1.)); +#47403 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47404 = ORIENTED_EDGE('',*,*,#45453,.T.); +#47405 = ORIENTED_EDGE('',*,*,#47330,.F.); +#47406 = ORIENTED_EDGE('',*,*,#42180,.F.); +#47407 = ADVANCED_FACE('',(#47408),#40964,.T.); +#47408 = FACE_BOUND('',#47409,.T.); +#47409 = EDGE_LOOP('',(#47410,#47411,#47412,#47433)); +#47410 = ORIENTED_EDGE('',*,*,#47359,.T.); +#47411 = ORIENTED_EDGE('',*,*,#44441,.T.); +#47412 = ORIENTED_EDGE('',*,*,#47413,.F.); +#47413 = EDGE_CURVE('',#40949,#44442,#47414,.T.); +#47414 = SURFACE_CURVE('',#47415,(#47419,#47426),.PCURVE_S1.); +#47415 = LINE('',#47416,#47417); +#47416 = CARTESIAN_POINT('',(172.921679,-48.734954,0.)); +#47417 = VECTOR('',#47418,1.); +#47418 = DIRECTION('',(0.,0.,1.)); +#47419 = PCURVE('',#40964,#47420); +#47420 = DEFINITIONAL_REPRESENTATION('',(#47421),#47425); +#47421 = LINE('',#47422,#47423); +#47422 = CARTESIAN_POINT('',(0.222479306204,0.)); +#47423 = VECTOR('',#47424,1.); +#47424 = DIRECTION('',(0.,-1.)); +#47425 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47426 = PCURVE('',#40992,#47427); +#47427 = DEFINITIONAL_REPRESENTATION('',(#47428),#47432); +#47428 = LINE('',#47429,#47430); +#47429 = CARTESIAN_POINT('',(0.,0.)); +#47430 = VECTOR('',#47431,1.); +#47431 = DIRECTION('',(0.,-1.)); +#47432 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47433 = ORIENTED_EDGE('',*,*,#40948,.F.); +#47434 = ADVANCED_FACE('',(#47435),#42168,.T.); +#47435 = FACE_BOUND('',#47436,.T.); +#47436 = EDGE_LOOP('',(#47437,#47458,#47459,#47460)); +#47437 = ORIENTED_EDGE('',*,*,#47438,.T.); +#47438 = EDGE_CURVE('',#42125,#45408,#47439,.T.); +#47439 = SURFACE_CURVE('',#47440,(#47444,#47451),.PCURVE_S1.); +#47440 = LINE('',#47441,#47442); +#47441 = CARTESIAN_POINT('',(132.831904,-48.267786,0.)); +#47442 = VECTOR('',#47443,1.); +#47443 = DIRECTION('',(0.,0.,1.)); +#47444 = PCURVE('',#42168,#47445); +#47445 = DEFINITIONAL_REPRESENTATION('',(#47446),#47450); +#47446 = LINE('',#47447,#47448); +#47447 = CARTESIAN_POINT('',(0.,0.)); +#47448 = VECTOR('',#47449,1.); +#47449 = DIRECTION('',(0.,-1.)); +#47450 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47451 = PCURVE('',#42140,#47452); +#47452 = DEFINITIONAL_REPRESENTATION('',(#47453),#47457); +#47453 = LINE('',#47454,#47455); +#47454 = CARTESIAN_POINT('',(0.22248012536,0.)); +#47455 = VECTOR('',#47456,1.); +#47456 = DIRECTION('',(0.,-1.)); +#47457 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47458 = ORIENTED_EDGE('',*,*,#45430,.T.); +#47459 = ORIENTED_EDGE('',*,*,#47384,.F.); +#47460 = ORIENTED_EDGE('',*,*,#42152,.F.); +#47461 = ADVANCED_FACE('',(#47462),#40992,.T.); +#47462 = FACE_BOUND('',#47463,.T.); +#47463 = EDGE_LOOP('',(#47464,#47465,#47466,#47487)); +#47464 = ORIENTED_EDGE('',*,*,#47413,.T.); +#47465 = ORIENTED_EDGE('',*,*,#44464,.T.); +#47466 = ORIENTED_EDGE('',*,*,#47467,.F.); +#47467 = EDGE_CURVE('',#40977,#44465,#47468,.T.); +#47468 = SURFACE_CURVE('',#47469,(#47473,#47480),.PCURVE_S1.); +#47469 = LINE('',#47470,#47471); +#47470 = CARTESIAN_POINT('',(173.015701,-48.936589,0.)); +#47471 = VECTOR('',#47472,1.); +#47472 = DIRECTION('',(0.,0.,1.)); +#47473 = PCURVE('',#40992,#47474); +#47474 = DEFINITIONAL_REPRESENTATION('',(#47475),#47479); +#47475 = LINE('',#47476,#47477); +#47476 = CARTESIAN_POINT('',(0.222478784851,0.)); +#47477 = VECTOR('',#47478,1.); +#47478 = DIRECTION('',(0.,-1.)); +#47479 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47480 = PCURVE('',#41020,#47481); +#47481 = DEFINITIONAL_REPRESENTATION('',(#47482),#47486); +#47482 = LINE('',#47483,#47484); +#47483 = CARTESIAN_POINT('',(0.,0.)); +#47484 = VECTOR('',#47485,1.); +#47485 = DIRECTION('',(0.,-1.)); +#47486 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47487 = ORIENTED_EDGE('',*,*,#40976,.F.); +#47488 = ADVANCED_FACE('',(#47489),#42140,.T.); +#47489 = FACE_BOUND('',#47490,.T.); +#47490 = EDGE_LOOP('',(#47491,#47512,#47513,#47514)); +#47491 = ORIENTED_EDGE('',*,*,#47492,.T.); +#47492 = EDGE_CURVE('',#42097,#45385,#47493,.T.); +#47493 = SURFACE_CURVE('',#47494,(#47498,#47505),.PCURVE_S1.); +#47494 = LINE('',#47495,#47496); +#47495 = CARTESIAN_POINT('',(132.649658,-48.395394,0.)); +#47496 = VECTOR('',#47497,1.); +#47497 = DIRECTION('',(0.,0.,1.)); +#47498 = PCURVE('',#42140,#47499); +#47499 = DEFINITIONAL_REPRESENTATION('',(#47500),#47504); +#47500 = LINE('',#47501,#47502); +#47501 = CARTESIAN_POINT('',(0.,0.)); +#47502 = VECTOR('',#47503,1.); +#47503 = DIRECTION('',(0.,-1.)); +#47504 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47505 = PCURVE('',#42112,#47506); +#47506 = DEFINITIONAL_REPRESENTATION('',(#47507),#47511); +#47507 = LINE('',#47508,#47509); +#47508 = CARTESIAN_POINT('',(0.222479127886,0.)); +#47509 = VECTOR('',#47510,1.); +#47510 = DIRECTION('',(0.,-1.)); +#47511 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47512 = ORIENTED_EDGE('',*,*,#45407,.T.); +#47513 = ORIENTED_EDGE('',*,*,#47438,.F.); +#47514 = ORIENTED_EDGE('',*,*,#42124,.F.); +#47515 = ADVANCED_FACE('',(#47516),#41020,.T.); +#47516 = FACE_BOUND('',#47517,.T.); +#47517 = EDGE_LOOP('',(#47518,#47519,#47520,#47541)); +#47518 = ORIENTED_EDGE('',*,*,#47467,.T.); +#47519 = ORIENTED_EDGE('',*,*,#44487,.T.); +#47520 = ORIENTED_EDGE('',*,*,#47521,.F.); +#47521 = EDGE_CURVE('',#41005,#44488,#47522,.T.); +#47522 = SURFACE_CURVE('',#47523,(#47527,#47534),.PCURVE_S1.); +#47523 = LINE('',#47524,#47525); +#47524 = CARTESIAN_POINT('',(173.073282,-49.151488,0.)); +#47525 = VECTOR('',#47526,1.); +#47526 = DIRECTION('',(0.,0.,1.)); +#47527 = PCURVE('',#41020,#47528); +#47528 = DEFINITIONAL_REPRESENTATION('',(#47529),#47533); +#47529 = LINE('',#47530,#47531); +#47530 = CARTESIAN_POINT('',(0.222479553582,0.)); +#47531 = VECTOR('',#47532,1.); +#47532 = DIRECTION('',(0.,-1.)); +#47533 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47534 = PCURVE('',#41048,#47535); +#47535 = DEFINITIONAL_REPRESENTATION('',(#47536),#47540); +#47536 = LINE('',#47537,#47538); +#47537 = CARTESIAN_POINT('',(0.,0.)); +#47538 = VECTOR('',#47539,1.); +#47539 = DIRECTION('',(0.,-1.)); +#47540 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47541 = ORIENTED_EDGE('',*,*,#41004,.F.); +#47542 = ADVANCED_FACE('',(#47543),#42112,.T.); +#47543 = FACE_BOUND('',#47544,.T.); +#47544 = EDGE_LOOP('',(#47545,#47566,#47567,#47568)); +#47545 = ORIENTED_EDGE('',*,*,#47546,.T.); +#47546 = EDGE_CURVE('',#42069,#45362,#47547,.T.); +#47547 = SURFACE_CURVE('',#47548,(#47552,#47559),.PCURVE_S1.); +#47548 = LINE('',#47549,#47550); +#47549 = CARTESIAN_POINT('',(132.492341,-48.55271,0.)); +#47550 = VECTOR('',#47551,1.); +#47551 = DIRECTION('',(0.,0.,1.)); +#47552 = PCURVE('',#42112,#47553); +#47553 = DEFINITIONAL_REPRESENTATION('',(#47554),#47558); +#47554 = LINE('',#47555,#47556); +#47555 = CARTESIAN_POINT('',(0.,0.)); +#47556 = VECTOR('',#47557,1.); +#47557 = DIRECTION('',(0.,-1.)); +#47558 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47559 = PCURVE('',#42084,#47560); +#47560 = DEFINITIONAL_REPRESENTATION('',(#47561),#47565); +#47561 = LINE('',#47562,#47563); +#47562 = CARTESIAN_POINT('',(0.222479634205,0.)); +#47563 = VECTOR('',#47564,1.); +#47564 = DIRECTION('',(0.,-1.)); +#47565 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47566 = ORIENTED_EDGE('',*,*,#45384,.T.); +#47567 = ORIENTED_EDGE('',*,*,#47492,.F.); +#47568 = ORIENTED_EDGE('',*,*,#42096,.F.); +#47569 = ADVANCED_FACE('',(#47570),#41048,.T.); +#47570 = FACE_BOUND('',#47571,.T.); +#47571 = EDGE_LOOP('',(#47572,#47573,#47574,#47595)); +#47572 = ORIENTED_EDGE('',*,*,#47521,.T.); +#47573 = ORIENTED_EDGE('',*,*,#44510,.T.); +#47574 = ORIENTED_EDGE('',*,*,#47575,.F.); +#47575 = EDGE_CURVE('',#41033,#44511,#47576,.T.); +#47576 = SURFACE_CURVE('',#47577,(#47581,#47588),.PCURVE_S1.); +#47577 = LINE('',#47578,#47579); +#47578 = CARTESIAN_POINT('',(173.092682,-49.37312,0.)); +#47579 = VECTOR('',#47580,1.); +#47580 = DIRECTION('',(0.,0.,1.)); +#47581 = PCURVE('',#41048,#47582); +#47582 = DEFINITIONAL_REPRESENTATION('',(#47583),#47587); +#47583 = LINE('',#47584,#47585); +#47584 = CARTESIAN_POINT('',(0.222479444947,0.)); +#47585 = VECTOR('',#47586,1.); +#47586 = DIRECTION('',(0.,-1.)); +#47587 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47588 = PCURVE('',#41076,#47589); +#47589 = DEFINITIONAL_REPRESENTATION('',(#47590),#47594); +#47590 = LINE('',#47591,#47592); +#47591 = CARTESIAN_POINT('',(0.,0.)); +#47592 = VECTOR('',#47593,1.); +#47593 = DIRECTION('',(0.,-1.)); +#47594 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47595 = ORIENTED_EDGE('',*,*,#41032,.F.); +#47596 = ADVANCED_FACE('',(#47597),#42084,.T.); +#47597 = FACE_BOUND('',#47598,.T.); +#47598 = EDGE_LOOP('',(#47599,#47620,#47621,#47622)); +#47599 = ORIENTED_EDGE('',*,*,#47600,.T.); +#47600 = EDGE_CURVE('',#42041,#45339,#47601,.T.); +#47601 = SURFACE_CURVE('',#47602,(#47606,#47613),.PCURVE_S1.); +#47602 = LINE('',#47603,#47604); +#47603 = CARTESIAN_POINT('',(132.364731,-48.734954,0.)); +#47604 = VECTOR('',#47605,1.); +#47605 = DIRECTION('',(0.,0.,1.)); +#47606 = PCURVE('',#42084,#47607); +#47607 = DEFINITIONAL_REPRESENTATION('',(#47608),#47612); +#47608 = LINE('',#47609,#47610); +#47609 = CARTESIAN_POINT('',(0.,0.)); +#47610 = VECTOR('',#47611,1.); +#47611 = DIRECTION('',(0.,-1.)); +#47612 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47613 = PCURVE('',#42056,#47614); +#47614 = DEFINITIONAL_REPRESENTATION('',(#47615),#47619); +#47615 = LINE('',#47616,#47617); +#47616 = CARTESIAN_POINT('',(0.222478301155,0.)); +#47617 = VECTOR('',#47618,1.); +#47618 = DIRECTION('',(0.,-1.)); +#47619 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47620 = ORIENTED_EDGE('',*,*,#45361,.T.); +#47621 = ORIENTED_EDGE('',*,*,#47546,.F.); +#47622 = ORIENTED_EDGE('',*,*,#42068,.F.); +#47623 = ADVANCED_FACE('',(#47624),#41076,.T.); +#47624 = FACE_BOUND('',#47625,.T.); +#47625 = EDGE_LOOP('',(#47626,#47627,#47628,#47649)); +#47626 = ORIENTED_EDGE('',*,*,#47575,.T.); +#47627 = ORIENTED_EDGE('',*,*,#44533,.T.); +#47628 = ORIENTED_EDGE('',*,*,#47629,.F.); +#47629 = EDGE_CURVE('',#41061,#44534,#47630,.T.); +#47630 = SURFACE_CURVE('',#47631,(#47635,#47642),.PCURVE_S1.); +#47631 = LINE('',#47632,#47633); +#47632 = CARTESIAN_POINT('',(169.735462,-130.140562,0.)); +#47633 = VECTOR('',#47634,1.); +#47634 = DIRECTION('',(0.,0.,1.)); +#47635 = PCURVE('',#41076,#47636); +#47636 = DEFINITIONAL_REPRESENTATION('',(#47637),#47641); +#47637 = LINE('',#47638,#47639); +#47638 = CARTESIAN_POINT('',(80.837185832708,0.)); +#47639 = VECTOR('',#47640,1.); +#47640 = DIRECTION('',(0.,-1.)); +#47641 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47642 = PCURVE('',#41104,#47643); +#47643 = DEFINITIONAL_REPRESENTATION('',(#47644),#47648); +#47644 = LINE('',#47645,#47646); +#47645 = CARTESIAN_POINT('',(0.,-0.)); +#47646 = VECTOR('',#47647,1.); +#47647 = DIRECTION('',(0.,-1.)); +#47648 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47649 = ORIENTED_EDGE('',*,*,#41060,.F.); +#47650 = ADVANCED_FACE('',(#47651),#42056,.T.); +#47651 = FACE_BOUND('',#47652,.T.); +#47652 = EDGE_LOOP('',(#47653,#47674,#47675,#47676)); +#47653 = ORIENTED_EDGE('',*,*,#47654,.T.); +#47654 = EDGE_CURVE('',#42013,#45316,#47655,.T.); +#47655 = SURFACE_CURVE('',#47656,(#47660,#47667),.PCURVE_S1.); +#47656 = LINE('',#47657,#47658); +#47657 = CARTESIAN_POINT('',(132.270708,-48.936588,0.)); +#47658 = VECTOR('',#47659,1.); +#47659 = DIRECTION('',(0.,0.,1.)); +#47660 = PCURVE('',#42056,#47661); +#47661 = DEFINITIONAL_REPRESENTATION('',(#47662),#47666); +#47662 = LINE('',#47663,#47664); +#47663 = CARTESIAN_POINT('',(0.,0.)); +#47664 = VECTOR('',#47665,1.); +#47665 = DIRECTION('',(0.,-1.)); +#47666 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47667 = PCURVE('',#42028,#47668); +#47668 = DEFINITIONAL_REPRESENTATION('',(#47669),#47673); +#47669 = LINE('',#47670,#47671); +#47670 = CARTESIAN_POINT('',(0.222479553582,0.)); +#47671 = VECTOR('',#47672,1.); +#47672 = DIRECTION('',(0.,-1.)); +#47673 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47674 = ORIENTED_EDGE('',*,*,#45338,.T.); +#47675 = ORIENTED_EDGE('',*,*,#47600,.F.); +#47676 = ORIENTED_EDGE('',*,*,#42040,.F.); +#47677 = ADVANCED_FACE('',(#47678),#41104,.T.); +#47678 = FACE_BOUND('',#47679,.T.); +#47679 = EDGE_LOOP('',(#47680,#47681,#47682,#47703)); +#47680 = ORIENTED_EDGE('',*,*,#47629,.T.); +#47681 = ORIENTED_EDGE('',*,*,#44556,.T.); +#47682 = ORIENTED_EDGE('',*,*,#47683,.F.); +#47683 = EDGE_CURVE('',#41089,#44557,#47684,.T.); +#47684 = SURFACE_CURVE('',#47685,(#47689,#47696),.PCURVE_S1.); +#47685 = LINE('',#47686,#47687); +#47686 = CARTESIAN_POINT('',(169.643462,-130.140562,0.)); +#47687 = VECTOR('',#47688,1.); +#47688 = DIRECTION('',(0.,0.,1.)); +#47689 = PCURVE('',#41104,#47690); +#47690 = DEFINITIONAL_REPRESENTATION('',(#47691),#47695); +#47691 = LINE('',#47692,#47693); +#47692 = CARTESIAN_POINT('',(9.200000000001E-02,0.)); +#47693 = VECTOR('',#47694,1.); +#47694 = DIRECTION('',(0.,-1.)); +#47695 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47696 = PCURVE('',#41132,#47697); +#47697 = DEFINITIONAL_REPRESENTATION('',(#47698),#47702); +#47698 = LINE('',#47699,#47700); +#47699 = CARTESIAN_POINT('',(0.,0.)); +#47700 = VECTOR('',#47701,1.); +#47701 = DIRECTION('',(0.,-1.)); +#47702 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47703 = ORIENTED_EDGE('',*,*,#41088,.F.); +#47704 = ADVANCED_FACE('',(#47705),#42028,.T.); +#47705 = FACE_BOUND('',#47706,.T.); +#47706 = EDGE_LOOP('',(#47707,#47728,#47729,#47730)); +#47707 = ORIENTED_EDGE('',*,*,#47708,.T.); +#47708 = EDGE_CURVE('',#41985,#45293,#47709,.T.); +#47709 = SURFACE_CURVE('',#47710,(#47714,#47721),.PCURVE_S1.); +#47710 = LINE('',#47711,#47712); +#47711 = CARTESIAN_POINT('',(132.213127,-49.151487,0.)); +#47712 = VECTOR('',#47713,1.); +#47713 = DIRECTION('',(0.,0.,1.)); +#47714 = PCURVE('',#42028,#47715); +#47715 = DEFINITIONAL_REPRESENTATION('',(#47716),#47720); +#47716 = LINE('',#47717,#47718); +#47717 = CARTESIAN_POINT('',(0.,0.)); +#47718 = VECTOR('',#47719,1.); +#47719 = DIRECTION('',(0.,-1.)); +#47720 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47721 = PCURVE('',#42000,#47722); +#47722 = DEFINITIONAL_REPRESENTATION('',(#47723),#47727); +#47723 = LINE('',#47724,#47725); +#47724 = CARTESIAN_POINT('',(0.222479482223,0.)); +#47725 = VECTOR('',#47726,1.); +#47726 = DIRECTION('',(0.,-1.)); +#47727 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47728 = ORIENTED_EDGE('',*,*,#45315,.T.); +#47729 = ORIENTED_EDGE('',*,*,#47654,.F.); +#47730 = ORIENTED_EDGE('',*,*,#42012,.F.); +#47731 = ADVANCED_FACE('',(#47732),#41132,.T.); +#47732 = FACE_BOUND('',#47733,.T.); +#47733 = EDGE_LOOP('',(#47734,#47735,#47736,#47757)); +#47734 = ORIENTED_EDGE('',*,*,#47683,.T.); +#47735 = ORIENTED_EDGE('',*,*,#44579,.T.); +#47736 = ORIENTED_EDGE('',*,*,#47737,.F.); +#47737 = EDGE_CURVE('',#41117,#44580,#47738,.T.); +#47738 = SURFACE_CURVE('',#47739,(#47743,#47750),.PCURVE_S1.); +#47739 = LINE('',#47740,#47741); +#47740 = CARTESIAN_POINT('',(169.312467,-130.159149,0.)); +#47741 = VECTOR('',#47742,1.); +#47742 = DIRECTION('',(0.,0.,1.)); +#47743 = PCURVE('',#41132,#47744); +#47744 = DEFINITIONAL_REPRESENTATION('',(#47745),#47749); +#47745 = LINE('',#47746,#47747); +#47746 = CARTESIAN_POINT('',(0.331516465042,0.)); +#47747 = VECTOR('',#47748,1.); +#47748 = DIRECTION('',(0.,-1.)); +#47749 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47750 = PCURVE('',#41160,#47751); +#47751 = DEFINITIONAL_REPRESENTATION('',(#47752),#47756); +#47752 = LINE('',#47753,#47754); +#47753 = CARTESIAN_POINT('',(0.,0.)); +#47754 = VECTOR('',#47755,1.); +#47755 = DIRECTION('',(0.,-1.)); +#47756 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47757 = ORIENTED_EDGE('',*,*,#41116,.F.); +#47758 = ADVANCED_FACE('',(#47759),#42000,.T.); +#47759 = FACE_BOUND('',#47760,.T.); +#47760 = EDGE_LOOP('',(#47761,#47782,#47783,#47784)); +#47761 = ORIENTED_EDGE('',*,*,#47762,.T.); +#47762 = EDGE_CURVE('',#41957,#45270,#47763,.T.); +#47763 = SURFACE_CURVE('',#47764,(#47768,#47775),.PCURVE_S1.); +#47764 = LINE('',#47765,#47766); +#47765 = CARTESIAN_POINT('',(132.193738,-49.37312,0.)); +#47766 = VECTOR('',#47767,1.); +#47767 = DIRECTION('',(0.,0.,1.)); +#47768 = PCURVE('',#42000,#47769); +#47769 = DEFINITIONAL_REPRESENTATION('',(#47770),#47774); +#47770 = LINE('',#47771,#47772); +#47771 = CARTESIAN_POINT('',(0.,0.)); +#47772 = VECTOR('',#47773,1.); +#47773 = DIRECTION('',(0.,-1.)); +#47774 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47775 = PCURVE('',#41972,#47776); +#47776 = DEFINITIONAL_REPRESENTATION('',(#47777),#47781); +#47777 = LINE('',#47778,#47779); +#47778 = CARTESIAN_POINT('',(80.836304653874,0.)); +#47779 = VECTOR('',#47780,1.); +#47780 = DIRECTION('',(0.,-1.)); +#47781 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47782 = ORIENTED_EDGE('',*,*,#45292,.T.); +#47783 = ORIENTED_EDGE('',*,*,#47708,.F.); +#47784 = ORIENTED_EDGE('',*,*,#41984,.F.); +#47785 = ADVANCED_FACE('',(#47786),#41160,.T.); +#47786 = FACE_BOUND('',#47787,.T.); +#47787 = EDGE_LOOP('',(#47788,#47789,#47790,#47811)); +#47788 = ORIENTED_EDGE('',*,*,#47737,.T.); +#47789 = ORIENTED_EDGE('',*,*,#44602,.T.); +#47790 = ORIENTED_EDGE('',*,*,#47791,.F.); +#47791 = EDGE_CURVE('',#41145,#44603,#47792,.T.); +#47792 = SURFACE_CURVE('',#47793,(#47797,#47804),.PCURVE_S1.); +#47793 = LINE('',#47794,#47795); +#47794 = CARTESIAN_POINT('',(168.985635,-130.214678,0.)); +#47795 = VECTOR('',#47796,1.); +#47796 = DIRECTION('',(0.,0.,1.)); +#47797 = PCURVE('',#41160,#47798); +#47798 = DEFINITIONAL_REPRESENTATION('',(#47799),#47803); +#47799 = LINE('',#47800,#47801); +#47800 = CARTESIAN_POINT('',(0.331515649804,0.)); +#47801 = VECTOR('',#47802,1.); +#47802 = DIRECTION('',(0.,-1.)); +#47803 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47804 = PCURVE('',#41188,#47805); +#47805 = DEFINITIONAL_REPRESENTATION('',(#47806),#47810); +#47806 = LINE('',#47807,#47808); +#47807 = CARTESIAN_POINT('',(0.,0.)); +#47808 = VECTOR('',#47809,1.); +#47809 = DIRECTION('',(0.,-1.)); +#47810 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47811 = ORIENTED_EDGE('',*,*,#41144,.F.); +#47812 = ADVANCED_FACE('',(#47813),#41972,.T.); +#47813 = FACE_BOUND('',#47814,.T.); +#47814 = EDGE_LOOP('',(#47815,#47836,#47837,#47838)); +#47815 = ORIENTED_EDGE('',*,*,#47816,.T.); +#47816 = EDGE_CURVE('',#41929,#45247,#47817,.T.); +#47817 = SURFACE_CURVE('',#47818,(#47822,#47829),.PCURVE_S1.); +#47818 = LINE('',#47819,#47820); +#47819 = CARTESIAN_POINT('',(135.572231,-130.138793,0.)); +#47820 = VECTOR('',#47821,1.); +#47821 = DIRECTION('',(0.,0.,1.)); +#47822 = PCURVE('',#41972,#47823); +#47823 = DEFINITIONAL_REPRESENTATION('',(#47824),#47828); +#47824 = LINE('',#47825,#47826); +#47825 = CARTESIAN_POINT('',(0.,0.)); +#47826 = VECTOR('',#47827,1.); +#47827 = DIRECTION('',(0.,-1.)); +#47828 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47829 = PCURVE('',#41944,#47830); +#47830 = DEFINITIONAL_REPRESENTATION('',(#47831),#47835); +#47831 = LINE('',#47832,#47833); +#47832 = CARTESIAN_POINT('',(9.200000000001E-02,0.)); +#47833 = VECTOR('',#47834,1.); +#47834 = DIRECTION('',(0.,-1.)); +#47835 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47836 = ORIENTED_EDGE('',*,*,#45269,.T.); +#47837 = ORIENTED_EDGE('',*,*,#47762,.F.); +#47838 = ORIENTED_EDGE('',*,*,#41956,.F.); +#47839 = ADVANCED_FACE('',(#47840),#41188,.T.); +#47840 = FACE_BOUND('',#47841,.T.); +#47841 = EDGE_LOOP('',(#47842,#47843,#47844,#47865)); +#47842 = ORIENTED_EDGE('',*,*,#47791,.T.); +#47843 = ORIENTED_EDGE('',*,*,#44625,.T.); +#47844 = ORIENTED_EDGE('',*,*,#47845,.F.); +#47845 = EDGE_CURVE('',#41173,#44626,#47846,.T.); +#47846 = SURFACE_CURVE('',#47847,(#47851,#47858),.PCURVE_S1.); +#47847 = LINE('',#47848,#47849); +#47848 = CARTESIAN_POINT('',(168.667075,-130.306452,0.)); +#47849 = VECTOR('',#47850,1.); +#47850 = DIRECTION('',(0.,0.,1.)); +#47851 = PCURVE('',#41188,#47852); +#47852 = DEFINITIONAL_REPRESENTATION('',(#47853),#47857); +#47853 = LINE('',#47854,#47855); +#47854 = CARTESIAN_POINT('',(0.331516124308,0.)); +#47855 = VECTOR('',#47856,1.); +#47856 = DIRECTION('',(0.,-1.)); +#47857 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47858 = PCURVE('',#41216,#47859); +#47859 = DEFINITIONAL_REPRESENTATION('',(#47860),#47864); +#47860 = LINE('',#47861,#47862); +#47861 = CARTESIAN_POINT('',(0.,0.)); +#47862 = VECTOR('',#47863,1.); +#47863 = DIRECTION('',(0.,-1.)); +#47864 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47865 = ORIENTED_EDGE('',*,*,#41172,.F.); +#47866 = ADVANCED_FACE('',(#47867),#41944,.T.); +#47867 = FACE_BOUND('',#47868,.T.); +#47868 = EDGE_LOOP('',(#47869,#47890,#47891,#47892)); +#47869 = ORIENTED_EDGE('',*,*,#47870,.T.); +#47870 = EDGE_CURVE('',#41901,#45224,#47871,.T.); +#47871 = SURFACE_CURVE('',#47872,(#47876,#47883),.PCURVE_S1.); +#47872 = LINE('',#47873,#47874); +#47873 = CARTESIAN_POINT('',(135.664231,-130.138793,0.)); +#47874 = VECTOR('',#47875,1.); +#47875 = DIRECTION('',(0.,0.,1.)); +#47876 = PCURVE('',#41944,#47877); +#47877 = DEFINITIONAL_REPRESENTATION('',(#47878),#47882); +#47878 = LINE('',#47879,#47880); +#47879 = CARTESIAN_POINT('',(0.,-0.)); +#47880 = VECTOR('',#47881,1.); +#47881 = DIRECTION('',(0.,-1.)); +#47882 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47883 = PCURVE('',#41916,#47884); +#47884 = DEFINITIONAL_REPRESENTATION('',(#47885),#47889); +#47885 = LINE('',#47886,#47887); +#47886 = CARTESIAN_POINT('',(0.331514524256,0.)); +#47887 = VECTOR('',#47888,1.); +#47888 = DIRECTION('',(0.,-1.)); +#47889 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47890 = ORIENTED_EDGE('',*,*,#45246,.T.); +#47891 = ORIENTED_EDGE('',*,*,#47816,.F.); +#47892 = ORIENTED_EDGE('',*,*,#41928,.F.); +#47893 = ADVANCED_FACE('',(#47894),#41216,.T.); +#47894 = FACE_BOUND('',#47895,.T.); +#47895 = EDGE_LOOP('',(#47896,#47897,#47898,#47919)); +#47896 = ORIENTED_EDGE('',*,*,#47845,.T.); +#47897 = ORIENTED_EDGE('',*,*,#44648,.T.); +#47898 = ORIENTED_EDGE('',*,*,#47899,.F.); +#47899 = EDGE_CURVE('',#41201,#44649,#47900,.T.); +#47900 = SURFACE_CURVE('',#47901,(#47905,#47912),.PCURVE_S1.); +#47901 = LINE('',#47902,#47903); +#47902 = CARTESIAN_POINT('',(168.360793,-130.433316,0.)); +#47903 = VECTOR('',#47904,1.); +#47904 = DIRECTION('',(0.,0.,1.)); +#47905 = PCURVE('',#41216,#47906); +#47906 = DEFINITIONAL_REPRESENTATION('',(#47907),#47911); +#47907 = LINE('',#47908,#47909); +#47908 = CARTESIAN_POINT('',(0.331516421946,0.)); +#47909 = VECTOR('',#47910,1.); +#47910 = DIRECTION('',(0.,-1.)); +#47911 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47912 = PCURVE('',#41244,#47913); +#47913 = DEFINITIONAL_REPRESENTATION('',(#47914),#47918); +#47914 = LINE('',#47915,#47916); +#47915 = CARTESIAN_POINT('',(0.,0.)); +#47916 = VECTOR('',#47917,1.); +#47917 = DIRECTION('',(0.,-1.)); +#47918 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47919 = ORIENTED_EDGE('',*,*,#41200,.F.); +#47920 = ADVANCED_FACE('',(#47921),#41916,.T.); +#47921 = FACE_BOUND('',#47922,.T.); +#47922 = EDGE_LOOP('',(#47923,#47944,#47945,#47946)); +#47923 = ORIENTED_EDGE('',*,*,#47924,.T.); +#47924 = EDGE_CURVE('',#41873,#45201,#47925,.T.); +#47925 = SURFACE_CURVE('',#47926,(#47930,#47937),.PCURVE_S1.); +#47926 = LINE('',#47927,#47928); +#47927 = CARTESIAN_POINT('',(135.995224,-130.157381,0.)); +#47928 = VECTOR('',#47929,1.); +#47929 = DIRECTION('',(0.,0.,1.)); +#47930 = PCURVE('',#41916,#47931); +#47931 = DEFINITIONAL_REPRESENTATION('',(#47932),#47936); +#47932 = LINE('',#47933,#47934); +#47933 = CARTESIAN_POINT('',(0.,0.)); +#47934 = VECTOR('',#47935,1.); +#47935 = DIRECTION('',(0.,-1.)); +#47936 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47937 = PCURVE('',#41888,#47938); +#47938 = DEFINITIONAL_REPRESENTATION('',(#47939),#47943); +#47939 = LINE('',#47940,#47941); +#47940 = CARTESIAN_POINT('',(0.331514663932,0.)); +#47941 = VECTOR('',#47942,1.); +#47942 = DIRECTION('',(0.,-1.)); +#47943 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47944 = ORIENTED_EDGE('',*,*,#45223,.T.); +#47945 = ORIENTED_EDGE('',*,*,#47870,.F.); +#47946 = ORIENTED_EDGE('',*,*,#41900,.F.); +#47947 = ADVANCED_FACE('',(#47948),#41244,.T.); +#47948 = FACE_BOUND('',#47949,.T.); +#47949 = EDGE_LOOP('',(#47950,#47951,#47952,#47973)); +#47950 = ORIENTED_EDGE('',*,*,#47899,.T.); +#47951 = ORIENTED_EDGE('',*,*,#44671,.T.); +#47952 = ORIENTED_EDGE('',*,*,#47953,.F.); +#47953 = EDGE_CURVE('',#41229,#44672,#47954,.T.); +#47954 = SURFACE_CURVE('',#47955,(#47959,#47966),.PCURVE_S1.); +#47955 = LINE('',#47956,#47957); +#47956 = CARTESIAN_POINT('',(168.070642,-130.593675,0.)); +#47957 = VECTOR('',#47958,1.); +#47958 = DIRECTION('',(0.,0.,1.)); +#47959 = PCURVE('',#41244,#47960); +#47960 = DEFINITIONAL_REPRESENTATION('',(#47961),#47965); +#47961 = LINE('',#47962,#47963); +#47962 = CARTESIAN_POINT('',(0.331515628111,0.)); +#47963 = VECTOR('',#47964,1.); +#47964 = DIRECTION('',(0.,-1.)); +#47965 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47966 = PCURVE('',#41272,#47967); +#47967 = DEFINITIONAL_REPRESENTATION('',(#47968),#47972); +#47968 = LINE('',#47969,#47970); +#47969 = CARTESIAN_POINT('',(0.,0.)); +#47970 = VECTOR('',#47971,1.); +#47971 = DIRECTION('',(0.,-1.)); +#47972 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47973 = ORIENTED_EDGE('',*,*,#41228,.F.); +#47974 = ADVANCED_FACE('',(#47975),#41888,.T.); +#47975 = FACE_BOUND('',#47976,.T.); +#47976 = EDGE_LOOP('',(#47977,#47998,#47999,#48000)); +#47977 = ORIENTED_EDGE('',*,*,#47978,.T.); +#47978 = EDGE_CURVE('',#41845,#45178,#47979,.T.); +#47979 = SURFACE_CURVE('',#47980,(#47984,#47991),.PCURVE_S1.); +#47980 = LINE('',#47981,#47982); +#47981 = CARTESIAN_POINT('',(136.322055,-130.21291,0.)); +#47982 = VECTOR('',#47983,1.); +#47983 = DIRECTION('',(0.,0.,1.)); +#47984 = PCURVE('',#41888,#47985); +#47985 = DEFINITIONAL_REPRESENTATION('',(#47986),#47990); +#47986 = LINE('',#47987,#47988); +#47987 = CARTESIAN_POINT('',(0.,0.)); +#47988 = VECTOR('',#47989,1.); +#47989 = DIRECTION('',(0.,-1.)); +#47990 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47991 = PCURVE('',#41860,#47992); +#47992 = DEFINITIONAL_REPRESENTATION('',(#47993),#47997); +#47993 = LINE('',#47994,#47995); +#47994 = CARTESIAN_POINT('',(0.331515163389,0.)); +#47995 = VECTOR('',#47996,1.); +#47996 = DIRECTION('',(0.,-1.)); +#47997 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#47998 = ORIENTED_EDGE('',*,*,#45200,.T.); +#47999 = ORIENTED_EDGE('',*,*,#47924,.F.); +#48000 = ORIENTED_EDGE('',*,*,#41872,.F.); +#48001 = ADVANCED_FACE('',(#48002),#41272,.T.); +#48002 = FACE_BOUND('',#48003,.T.); +#48003 = EDGE_LOOP('',(#48004,#48005,#48006,#48027)); +#48004 = ORIENTED_EDGE('',*,*,#47953,.T.); +#48005 = ORIENTED_EDGE('',*,*,#44694,.T.); +#48006 = ORIENTED_EDGE('',*,*,#48007,.F.); +#48007 = EDGE_CURVE('',#41257,#44695,#48008,.T.); +#48008 = SURFACE_CURVE('',#48009,(#48013,#48020),.PCURVE_S1.); +#48009 = LINE('',#48010,#48011); +#48010 = CARTESIAN_POINT('',(167.800269,-130.785512,0.)); +#48011 = VECTOR('',#48012,1.); +#48012 = DIRECTION('',(0.,0.,1.)); +#48013 = PCURVE('',#41272,#48014); +#48014 = DEFINITIONAL_REPRESENTATION('',(#48015),#48019); +#48015 = LINE('',#48016,#48017); +#48016 = CARTESIAN_POINT('',(0.331516204277,0.)); +#48017 = VECTOR('',#48018,1.); +#48018 = DIRECTION('',(0.,-1.)); +#48019 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48020 = PCURVE('',#41300,#48021); +#48021 = DEFINITIONAL_REPRESENTATION('',(#48022),#48026); +#48022 = LINE('',#48023,#48024); +#48023 = CARTESIAN_POINT('',(0.,0.)); +#48024 = VECTOR('',#48025,1.); +#48025 = DIRECTION('',(0.,-1.)); +#48026 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48027 = ORIENTED_EDGE('',*,*,#41256,.F.); +#48028 = ADVANCED_FACE('',(#48029),#41860,.T.); +#48029 = FACE_BOUND('',#48030,.T.); +#48030 = EDGE_LOOP('',(#48031,#48052,#48053,#48054)); +#48031 = ORIENTED_EDGE('',*,*,#48032,.T.); +#48032 = EDGE_CURVE('',#41817,#45155,#48033,.T.); +#48033 = SURFACE_CURVE('',#48034,(#48038,#48045),.PCURVE_S1.); +#48034 = LINE('',#48035,#48036); +#48035 = CARTESIAN_POINT('',(136.640614,-130.304684,0.)); +#48036 = VECTOR('',#48037,1.); +#48037 = DIRECTION('',(0.,0.,1.)); +#48038 = PCURVE('',#41860,#48039); +#48039 = DEFINITIONAL_REPRESENTATION('',(#48040),#48044); +#48040 = LINE('',#48041,#48042); +#48041 = CARTESIAN_POINT('',(0.,0.)); +#48042 = VECTOR('',#48043,1.); +#48043 = DIRECTION('',(0.,-1.)); +#48044 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48045 = PCURVE('',#41832,#48046); +#48046 = DEFINITIONAL_REPRESENTATION('',(#48047),#48051); +#48047 = LINE('',#48048,#48049); +#48048 = CARTESIAN_POINT('',(0.331514574183,0.)); +#48049 = VECTOR('',#48050,1.); +#48050 = DIRECTION('',(0.,-1.)); +#48051 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48052 = ORIENTED_EDGE('',*,*,#45177,.T.); +#48053 = ORIENTED_EDGE('',*,*,#47978,.F.); +#48054 = ORIENTED_EDGE('',*,*,#41844,.F.); +#48055 = ADVANCED_FACE('',(#48056),#41300,.T.); +#48056 = FACE_BOUND('',#48057,.T.); +#48057 = EDGE_LOOP('',(#48058,#48059,#48060,#48081)); +#48058 = ORIENTED_EDGE('',*,*,#48007,.T.); +#48059 = ORIENTED_EDGE('',*,*,#44717,.T.); +#48060 = ORIENTED_EDGE('',*,*,#48061,.F.); +#48061 = EDGE_CURVE('',#41285,#44718,#48062,.T.); +#48062 = SURFACE_CURVE('',#48063,(#48067,#48074),.PCURVE_S1.); +#48063 = LINE('',#48064,#48065); +#48064 = CARTESIAN_POINT('',(167.553076,-131.006416,0.)); +#48065 = VECTOR('',#48066,1.); +#48066 = DIRECTION('',(0.,0.,1.)); +#48067 = PCURVE('',#41300,#48068); +#48068 = DEFINITIONAL_REPRESENTATION('',(#48069),#48073); +#48069 = LINE('',#48070,#48071); +#48070 = CARTESIAN_POINT('',(0.331516148121,0.)); +#48071 = VECTOR('',#48072,1.); +#48072 = DIRECTION('',(0.,-1.)); +#48073 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48074 = PCURVE('',#41328,#48075); +#48075 = DEFINITIONAL_REPRESENTATION('',(#48076),#48080); +#48076 = LINE('',#48077,#48078); +#48077 = CARTESIAN_POINT('',(0.,0.)); +#48078 = VECTOR('',#48079,1.); +#48079 = DIRECTION('',(0.,-1.)); +#48080 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48081 = ORIENTED_EDGE('',*,*,#41284,.F.); +#48082 = ADVANCED_FACE('',(#48083),#41832,.T.); +#48083 = FACE_BOUND('',#48084,.T.); +#48084 = EDGE_LOOP('',(#48085,#48106,#48107,#48108)); +#48085 = ORIENTED_EDGE('',*,*,#48086,.T.); +#48086 = EDGE_CURVE('',#41789,#45132,#48087,.T.); +#48087 = SURFACE_CURVE('',#48088,(#48092,#48099),.PCURVE_S1.); +#48088 = LINE('',#48089,#48090); +#48089 = CARTESIAN_POINT('',(136.946894,-130.431548,0.)); +#48090 = VECTOR('',#48091,1.); +#48091 = DIRECTION('',(0.,0.,1.)); +#48092 = PCURVE('',#41832,#48093); +#48093 = DEFINITIONAL_REPRESENTATION('',(#48094),#48098); +#48094 = LINE('',#48095,#48096); +#48095 = CARTESIAN_POINT('',(0.,0.)); +#48096 = VECTOR('',#48097,1.); +#48097 = DIRECTION('',(0.,-1.)); +#48098 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48099 = PCURVE('',#41804,#48100); +#48100 = DEFINITIONAL_REPRESENTATION('',(#48101),#48105); +#48101 = LINE('',#48102,#48103); +#48102 = CARTESIAN_POINT('',(0.331515236603,0.)); +#48103 = VECTOR('',#48104,1.); +#48104 = DIRECTION('',(0.,-1.)); +#48105 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48106 = ORIENTED_EDGE('',*,*,#45154,.T.); +#48107 = ORIENTED_EDGE('',*,*,#48032,.F.); +#48108 = ORIENTED_EDGE('',*,*,#41816,.F.); +#48109 = ADVANCED_FACE('',(#48110),#41328,.T.); +#48110 = FACE_BOUND('',#48111,.T.); +#48111 = EDGE_LOOP('',(#48112,#48113,#48114,#48135)); +#48112 = ORIENTED_EDGE('',*,*,#48061,.T.); +#48113 = ORIENTED_EDGE('',*,*,#44740,.T.); +#48114 = ORIENTED_EDGE('',*,*,#48115,.F.); +#48115 = EDGE_CURVE('',#41313,#44741,#48116,.T.); +#48116 = SURFACE_CURVE('',#48117,(#48121,#48128),.PCURVE_S1.); +#48117 = LINE('',#48118,#48119); +#48118 = CARTESIAN_POINT('',(167.33217,-131.253607,0.)); +#48119 = VECTOR('',#48120,1.); +#48120 = DIRECTION('',(0.,0.,1.)); +#48121 = PCURVE('',#41328,#48122); +#48122 = DEFINITIONAL_REPRESENTATION('',(#48123),#48127); +#48123 = LINE('',#48124,#48125); +#48124 = CARTESIAN_POINT('',(0.331515989534,0.)); +#48125 = VECTOR('',#48126,1.); +#48126 = DIRECTION('',(0.,-1.)); +#48127 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48128 = PCURVE('',#41356,#48129); +#48129 = DEFINITIONAL_REPRESENTATION('',(#48130),#48134); +#48130 = LINE('',#48131,#48132); +#48131 = CARTESIAN_POINT('',(0.,0.)); +#48132 = VECTOR('',#48133,1.); +#48133 = DIRECTION('',(0.,-1.)); +#48134 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48135 = ORIENTED_EDGE('',*,*,#41312,.F.); +#48136 = ADVANCED_FACE('',(#48137),#41804,.T.); +#48137 = FACE_BOUND('',#48138,.T.); +#48138 = EDGE_LOOP('',(#48139,#48160,#48161,#48162)); +#48139 = ORIENTED_EDGE('',*,*,#48140,.T.); +#48140 = EDGE_CURVE('',#41761,#45109,#48141,.T.); +#48141 = SURFACE_CURVE('',#48142,(#48146,#48153),.PCURVE_S1.); +#48142 = LINE('',#48143,#48144); +#48143 = CARTESIAN_POINT('',(137.237044,-130.591908,0.)); +#48144 = VECTOR('',#48145,1.); +#48145 = DIRECTION('',(0.,0.,1.)); +#48146 = PCURVE('',#41804,#48147); +#48147 = DEFINITIONAL_REPRESENTATION('',(#48148),#48152); +#48148 = LINE('',#48149,#48150); +#48149 = CARTESIAN_POINT('',(0.,0.)); +#48150 = VECTOR('',#48151,1.); +#48151 = DIRECTION('',(0.,-1.)); +#48152 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48153 = PCURVE('',#41776,#48154); +#48154 = DEFINITIONAL_REPRESENTATION('',(#48155),#48159); +#48155 = LINE('',#48156,#48157); +#48156 = CARTESIAN_POINT('',(0.331514573149,0.)); +#48157 = VECTOR('',#48158,1.); +#48158 = DIRECTION('',(0.,-1.)); +#48159 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48160 = ORIENTED_EDGE('',*,*,#45131,.T.); +#48161 = ORIENTED_EDGE('',*,*,#48086,.F.); +#48162 = ORIENTED_EDGE('',*,*,#41788,.F.); +#48163 = ADVANCED_FACE('',(#48164),#41356,.T.); +#48164 = FACE_BOUND('',#48165,.T.); +#48165 = EDGE_LOOP('',(#48166,#48167,#48168,#48189)); +#48166 = ORIENTED_EDGE('',*,*,#48115,.T.); +#48167 = ORIENTED_EDGE('',*,*,#44763,.T.); +#48168 = ORIENTED_EDGE('',*,*,#48169,.F.); +#48169 = EDGE_CURVE('',#41341,#44764,#48170,.T.); +#48170 = SURFACE_CURVE('',#48171,(#48175,#48182),.PCURVE_S1.); +#48171 = LINE('',#48172,#48173); +#48172 = CARTESIAN_POINT('',(167.140329,-131.523978,0.)); +#48173 = VECTOR('',#48174,1.); +#48174 = DIRECTION('',(0.,0.,1.)); +#48175 = PCURVE('',#41356,#48176); +#48176 = DEFINITIONAL_REPRESENTATION('',(#48177),#48181); +#48177 = LINE('',#48178,#48179); +#48178 = CARTESIAN_POINT('',(0.331516887838,0.)); +#48179 = VECTOR('',#48180,1.); +#48180 = DIRECTION('',(0.,-1.)); +#48181 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48182 = PCURVE('',#41384,#48183); +#48183 = DEFINITIONAL_REPRESENTATION('',(#48184),#48188); +#48184 = LINE('',#48185,#48186); +#48185 = CARTESIAN_POINT('',(0.,0.)); +#48186 = VECTOR('',#48187,1.); +#48187 = DIRECTION('',(0.,-1.)); +#48188 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48189 = ORIENTED_EDGE('',*,*,#41340,.F.); +#48190 = ADVANCED_FACE('',(#48191),#41776,.T.); +#48191 = FACE_BOUND('',#48192,.T.); +#48192 = EDGE_LOOP('',(#48193,#48214,#48215,#48216)); +#48193 = ORIENTED_EDGE('',*,*,#48194,.T.); +#48194 = EDGE_CURVE('',#41733,#45086,#48195,.T.); +#48195 = SURFACE_CURVE('',#48196,(#48200,#48207),.PCURVE_S1.); +#48196 = LINE('',#48197,#48198); +#48197 = CARTESIAN_POINT('',(137.507415,-130.783745,0.)); +#48198 = VECTOR('',#48199,1.); +#48199 = DIRECTION('',(0.,0.,1.)); +#48200 = PCURVE('',#41776,#48201); +#48201 = DEFINITIONAL_REPRESENTATION('',(#48202),#48206); +#48202 = LINE('',#48203,#48204); +#48203 = CARTESIAN_POINT('',(0.,0.)); +#48204 = VECTOR('',#48205,1.); +#48205 = DIRECTION('',(0.,-1.)); +#48206 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48207 = PCURVE('',#41748,#48208); +#48208 = DEFINITIONAL_REPRESENTATION('',(#48209),#48213); +#48209 = LINE('',#48210,#48211); +#48210 = CARTESIAN_POINT('',(0.331514656836,0.)); +#48211 = VECTOR('',#48212,1.); +#48212 = DIRECTION('',(0.,-1.)); +#48213 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48214 = ORIENTED_EDGE('',*,*,#45108,.T.); +#48215 = ORIENTED_EDGE('',*,*,#48140,.F.); +#48216 = ORIENTED_EDGE('',*,*,#41760,.F.); +#48217 = ADVANCED_FACE('',(#48218),#41384,.T.); +#48218 = FACE_BOUND('',#48219,.T.); +#48219 = EDGE_LOOP('',(#48220,#48221,#48222,#48243)); +#48220 = ORIENTED_EDGE('',*,*,#48169,.T.); +#48221 = ORIENTED_EDGE('',*,*,#44786,.T.); +#48222 = ORIENTED_EDGE('',*,*,#48223,.F.); +#48223 = EDGE_CURVE('',#41369,#44787,#48224,.T.); +#48224 = SURFACE_CURVE('',#48225,(#48229,#48236),.PCURVE_S1.); +#48225 = LINE('',#48226,#48227); +#48226 = CARTESIAN_POINT('',(166.979967,-131.814127,0.)); +#48227 = VECTOR('',#48228,1.); +#48228 = DIRECTION('',(0.,0.,1.)); +#48229 = PCURVE('',#41384,#48230); +#48230 = DEFINITIONAL_REPRESENTATION('',(#48231),#48235); +#48231 = LINE('',#48232,#48233); +#48232 = CARTESIAN_POINT('',(0.331515328824,0.)); +#48233 = VECTOR('',#48234,1.); +#48234 = DIRECTION('',(0.,-1.)); +#48235 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48236 = PCURVE('',#41412,#48237); +#48237 = DEFINITIONAL_REPRESENTATION('',(#48238),#48242); +#48238 = LINE('',#48239,#48240); +#48239 = CARTESIAN_POINT('',(0.,0.)); +#48240 = VECTOR('',#48241,1.); +#48241 = DIRECTION('',(0.,-1.)); +#48242 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48243 = ORIENTED_EDGE('',*,*,#41368,.F.); +#48244 = ADVANCED_FACE('',(#48245),#41748,.T.); +#48245 = FACE_BOUND('',#48246,.T.); +#48246 = EDGE_LOOP('',(#48247,#48268,#48269,#48270)); +#48247 = ORIENTED_EDGE('',*,*,#48248,.T.); +#48248 = EDGE_CURVE('',#41705,#45063,#48249,.T.); +#48249 = SURFACE_CURVE('',#48250,(#48254,#48261),.PCURVE_S1.); +#48250 = LINE('',#48251,#48252); +#48251 = CARTESIAN_POINT('',(137.754606,-131.004649,0.)); +#48252 = VECTOR('',#48253,1.); +#48253 = DIRECTION('',(0.,0.,1.)); +#48254 = PCURVE('',#41748,#48255); +#48255 = DEFINITIONAL_REPRESENTATION('',(#48256),#48260); +#48256 = LINE('',#48257,#48258); +#48257 = CARTESIAN_POINT('',(0.,0.)); +#48258 = VECTOR('',#48259,1.); +#48259 = DIRECTION('',(0.,-1.)); +#48260 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48261 = PCURVE('',#41720,#48262); +#48262 = DEFINITIONAL_REPRESENTATION('',(#48263),#48267); +#48263 = LINE('',#48264,#48265); +#48264 = CARTESIAN_POINT('',(0.331514656836,0.)); +#48265 = VECTOR('',#48266,1.); +#48266 = DIRECTION('',(0.,-1.)); +#48267 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48268 = ORIENTED_EDGE('',*,*,#45085,.T.); +#48269 = ORIENTED_EDGE('',*,*,#48194,.F.); +#48270 = ORIENTED_EDGE('',*,*,#41732,.F.); +#48271 = ADVANCED_FACE('',(#48272),#41412,.T.); +#48272 = FACE_BOUND('',#48273,.T.); +#48273 = EDGE_LOOP('',(#48274,#48275,#48276,#48297)); +#48274 = ORIENTED_EDGE('',*,*,#48223,.T.); +#48275 = ORIENTED_EDGE('',*,*,#44809,.T.); +#48276 = ORIENTED_EDGE('',*,*,#48277,.F.); +#48277 = EDGE_CURVE('',#41397,#44810,#48278,.T.); +#48278 = SURFACE_CURVE('',#48279,(#48283,#48290),.PCURVE_S1.); +#48279 = LINE('',#48280,#48281); +#48280 = CARTESIAN_POINT('',(166.8531,-132.120408,0.)); +#48281 = VECTOR('',#48282,1.); +#48282 = DIRECTION('',(0.,0.,1.)); +#48283 = PCURVE('',#41412,#48284); +#48284 = DEFINITIONAL_REPRESENTATION('',(#48285),#48289); +#48285 = LINE('',#48286,#48287); +#48286 = CARTESIAN_POINT('',(0.331516646113,0.)); +#48287 = VECTOR('',#48288,1.); +#48288 = DIRECTION('',(0.,-1.)); +#48289 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48290 = PCURVE('',#41440,#48291); +#48291 = DEFINITIONAL_REPRESENTATION('',(#48292),#48296); +#48292 = LINE('',#48293,#48294); +#48293 = CARTESIAN_POINT('',(0.,0.)); +#48294 = VECTOR('',#48295,1.); +#48295 = DIRECTION('',(0.,-1.)); +#48296 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48297 = ORIENTED_EDGE('',*,*,#41396,.F.); +#48298 = ADVANCED_FACE('',(#48299),#41720,.T.); +#48299 = FACE_BOUND('',#48300,.T.); +#48300 = EDGE_LOOP('',(#48301,#48322,#48323,#48324)); +#48301 = ORIENTED_EDGE('',*,*,#48302,.T.); +#48302 = EDGE_CURVE('',#41677,#45040,#48303,.T.); +#48303 = SURFACE_CURVE('',#48304,(#48308,#48315),.PCURVE_S1.); +#48304 = LINE('',#48305,#48306); +#48305 = CARTESIAN_POINT('',(137.97551,-131.25184,0.)); +#48306 = VECTOR('',#48307,1.); +#48307 = DIRECTION('',(0.,0.,1.)); +#48308 = PCURVE('',#41720,#48309); +#48309 = DEFINITIONAL_REPRESENTATION('',(#48310),#48314); +#48310 = LINE('',#48311,#48312); +#48311 = CARTESIAN_POINT('',(0.,0.)); +#48312 = VECTOR('',#48313,1.); +#48313 = DIRECTION('',(0.,-1.)); +#48314 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48315 = PCURVE('',#41692,#48316); +#48316 = DEFINITIONAL_REPRESENTATION('',(#48317),#48321); +#48317 = LINE('',#48318,#48319); +#48318 = CARTESIAN_POINT('',(0.331515151818,0.)); +#48319 = VECTOR('',#48320,1.); +#48320 = DIRECTION('',(0.,-1.)); +#48321 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48322 = ORIENTED_EDGE('',*,*,#45062,.T.); +#48323 = ORIENTED_EDGE('',*,*,#48248,.F.); +#48324 = ORIENTED_EDGE('',*,*,#41704,.F.); +#48325 = ADVANCED_FACE('',(#48326),#41440,.T.); +#48326 = FACE_BOUND('',#48327,.T.); +#48327 = EDGE_LOOP('',(#48328,#48329,#48330,#48351)); +#48328 = ORIENTED_EDGE('',*,*,#48277,.T.); +#48329 = ORIENTED_EDGE('',*,*,#44832,.T.); +#48330 = ORIENTED_EDGE('',*,*,#48331,.F.); +#48331 = EDGE_CURVE('',#41425,#44833,#48332,.T.); +#48332 = SURFACE_CURVE('',#48333,(#48337,#48344),.PCURVE_S1.); +#48333 = LINE('',#48334,#48335); +#48334 = CARTESIAN_POINT('',(166.761323,-132.438967,0.)); +#48335 = VECTOR('',#48336,1.); +#48336 = DIRECTION('',(0.,0.,1.)); +#48337 = PCURVE('',#41440,#48338); +#48338 = DEFINITIONAL_REPRESENTATION('',(#48339),#48343); +#48339 = LINE('',#48340,#48341); +#48340 = CARTESIAN_POINT('',(0.331515993898,0.)); +#48341 = VECTOR('',#48342,1.); +#48342 = DIRECTION('',(0.,-1.)); +#48343 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48344 = PCURVE('',#41468,#48345); +#48345 = DEFINITIONAL_REPRESENTATION('',(#48346),#48350); +#48346 = LINE('',#48347,#48348); +#48347 = CARTESIAN_POINT('',(0.,0.)); +#48348 = VECTOR('',#48349,1.); +#48349 = DIRECTION('',(0.,-1.)); +#48350 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48351 = ORIENTED_EDGE('',*,*,#41424,.F.); +#48352 = ADVANCED_FACE('',(#48353),#41692,.T.); +#48353 = FACE_BOUND('',#48354,.T.); +#48354 = EDGE_LOOP('',(#48355,#48376,#48377,#48378)); +#48355 = ORIENTED_EDGE('',*,*,#48356,.T.); +#48356 = EDGE_CURVE('',#41649,#45017,#48357,.T.); +#48357 = SURFACE_CURVE('',#48358,(#48362,#48369),.PCURVE_S1.); +#48358 = LINE('',#48359,#48360); +#48359 = CARTESIAN_POINT('',(138.167348,-131.522211,0.)); +#48360 = VECTOR('',#48361,1.); +#48361 = DIRECTION('',(0.,0.,1.)); +#48362 = PCURVE('',#41692,#48363); +#48363 = DEFINITIONAL_REPRESENTATION('',(#48364),#48368); +#48364 = LINE('',#48365,#48366); +#48365 = CARTESIAN_POINT('',(0.,0.)); +#48366 = VECTOR('',#48367,1.); +#48367 = DIRECTION('',(0.,-1.)); +#48368 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48369 = PCURVE('',#41664,#48370); +#48370 = DEFINITIONAL_REPRESENTATION('',(#48371),#48375); +#48371 = LINE('',#48372,#48373); +#48372 = CARTESIAN_POINT('',(0.331514752886,0.)); +#48373 = VECTOR('',#48374,1.); +#48374 = DIRECTION('',(0.,-1.)); +#48375 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48376 = ORIENTED_EDGE('',*,*,#45039,.T.); +#48377 = ORIENTED_EDGE('',*,*,#48302,.F.); +#48378 = ORIENTED_EDGE('',*,*,#41676,.F.); +#48379 = ADVANCED_FACE('',(#48380),#41468,.T.); +#48380 = FACE_BOUND('',#48381,.T.); +#48381 = EDGE_LOOP('',(#48382,#48383,#48384,#48405)); +#48382 = ORIENTED_EDGE('',*,*,#48331,.T.); +#48383 = ORIENTED_EDGE('',*,*,#44855,.T.); +#48384 = ORIENTED_EDGE('',*,*,#48385,.F.); +#48385 = EDGE_CURVE('',#41453,#44856,#48386,.T.); +#48386 = SURFACE_CURVE('',#48387,(#48391,#48398),.PCURVE_S1.); +#48387 = LINE('',#48388,#48389); +#48388 = CARTESIAN_POINT('',(166.70579,-132.765799,0.)); +#48389 = VECTOR('',#48390,1.); +#48390 = DIRECTION('',(0.,0.,1.)); +#48391 = PCURVE('',#41468,#48392); +#48392 = DEFINITIONAL_REPRESENTATION('',(#48393),#48397); +#48393 = LINE('',#48394,#48395); +#48394 = CARTESIAN_POINT('',(0.331516319829,0.)); +#48395 = VECTOR('',#48396,1.); +#48396 = DIRECTION('',(0.,-1.)); +#48397 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48398 = PCURVE('',#41496,#48399); +#48399 = DEFINITIONAL_REPRESENTATION('',(#48400),#48404); +#48400 = LINE('',#48401,#48402); +#48401 = CARTESIAN_POINT('',(0.,0.)); +#48402 = VECTOR('',#48403,1.); +#48403 = DIRECTION('',(0.,-1.)); +#48404 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48405 = ORIENTED_EDGE('',*,*,#41452,.F.); +#48406 = ADVANCED_FACE('',(#48407),#41664,.T.); +#48407 = FACE_BOUND('',#48408,.T.); +#48408 = EDGE_LOOP('',(#48409,#48430,#48431,#48432)); +#48409 = ORIENTED_EDGE('',*,*,#48410,.T.); +#48410 = EDGE_CURVE('',#41621,#44994,#48411,.T.); +#48411 = SURFACE_CURVE('',#48412,(#48416,#48423),.PCURVE_S1.); +#48412 = LINE('',#48413,#48414); +#48413 = CARTESIAN_POINT('',(138.327707,-131.812361,0.)); +#48414 = VECTOR('',#48415,1.); +#48415 = DIRECTION('',(0.,0.,1.)); +#48416 = PCURVE('',#41664,#48417); +#48417 = DEFINITIONAL_REPRESENTATION('',(#48418),#48422); +#48418 = LINE('',#48419,#48420); +#48419 = CARTESIAN_POINT('',(0.,0.)); +#48420 = VECTOR('',#48421,1.); +#48421 = DIRECTION('',(0.,-1.)); +#48422 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48423 = PCURVE('',#41636,#48424); +#48424 = DEFINITIONAL_REPRESENTATION('',(#48425),#48429); +#48425 = LINE('',#48426,#48427); +#48426 = CARTESIAN_POINT('',(0.331514956865,0.)); +#48427 = VECTOR('',#48428,1.); +#48428 = DIRECTION('',(0.,-1.)); +#48429 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48430 = ORIENTED_EDGE('',*,*,#45016,.T.); +#48431 = ORIENTED_EDGE('',*,*,#48356,.F.); +#48432 = ORIENTED_EDGE('',*,*,#41648,.F.); +#48433 = ADVANCED_FACE('',(#48434),#41496,.T.); +#48434 = FACE_BOUND('',#48435,.T.); +#48435 = EDGE_LOOP('',(#48436,#48437,#48438,#48459)); +#48436 = ORIENTED_EDGE('',*,*,#48385,.T.); +#48437 = ORIENTED_EDGE('',*,*,#44878,.T.); +#48438 = ORIENTED_EDGE('',*,*,#48439,.F.); +#48439 = EDGE_CURVE('',#41481,#44879,#48440,.T.); +#48440 = SURFACE_CURVE('',#48441,(#48445,#48452),.PCURVE_S1.); +#48441 = LINE('',#48442,#48443); +#48442 = CARTESIAN_POINT('',(166.687231,-133.096793,0.)); +#48443 = VECTOR('',#48444,1.); +#48444 = DIRECTION('',(0.,0.,1.)); +#48445 = PCURVE('',#41496,#48446); +#48446 = DEFINITIONAL_REPRESENTATION('',(#48447),#48451); +#48447 = LINE('',#48448,#48449); +#48448 = CARTESIAN_POINT('',(0.331513897924,0.)); +#48449 = VECTOR('',#48450,1.); +#48450 = DIRECTION('',(0.,-1.)); +#48451 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48452 = PCURVE('',#41524,#48453); +#48453 = DEFINITIONAL_REPRESENTATION('',(#48454),#48458); +#48454 = LINE('',#48455,#48456); +#48455 = CARTESIAN_POINT('',(0.,0.)); +#48456 = VECTOR('',#48457,1.); +#48457 = DIRECTION('',(0.,-1.)); +#48458 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48459 = ORIENTED_EDGE('',*,*,#41480,.F.); +#48460 = ADVANCED_FACE('',(#48461),#41636,.T.); +#48461 = FACE_BOUND('',#48462,.T.); +#48462 = EDGE_LOOP('',(#48463,#48484,#48485,#48486)); +#48463 = ORIENTED_EDGE('',*,*,#48464,.T.); +#48464 = EDGE_CURVE('',#41593,#44971,#48465,.T.); +#48465 = SURFACE_CURVE('',#48466,(#48470,#48477),.PCURVE_S1.); +#48466 = LINE('',#48467,#48468); +#48467 = CARTESIAN_POINT('',(138.454572,-132.118641,0.)); +#48468 = VECTOR('',#48469,1.); +#48469 = DIRECTION('',(0.,0.,1.)); +#48470 = PCURVE('',#41636,#48471); +#48471 = DEFINITIONAL_REPRESENTATION('',(#48472),#48476); +#48472 = LINE('',#48473,#48474); +#48473 = CARTESIAN_POINT('',(0.,0.)); +#48474 = VECTOR('',#48475,1.); +#48475 = DIRECTION('',(0.,-1.)); +#48476 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48477 = PCURVE('',#41608,#48478); +#48478 = DEFINITIONAL_REPRESENTATION('',(#48479),#48483); +#48479 = LINE('',#48480,#48481); +#48480 = CARTESIAN_POINT('',(0.331515163389,0.)); +#48481 = VECTOR('',#48482,1.); +#48482 = DIRECTION('',(0.,-1.)); +#48483 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48484 = ORIENTED_EDGE('',*,*,#44993,.T.); +#48485 = ORIENTED_EDGE('',*,*,#48410,.F.); +#48486 = ORIENTED_EDGE('',*,*,#41620,.F.); +#48487 = ADVANCED_FACE('',(#48488),#41524,.T.); +#48488 = FACE_BOUND('',#48489,.T.); +#48489 = EDGE_LOOP('',(#48490,#48491,#48492,#48513)); +#48490 = ORIENTED_EDGE('',*,*,#48439,.T.); +#48491 = ORIENTED_EDGE('',*,*,#44901,.T.); +#48492 = ORIENTED_EDGE('',*,*,#48493,.F.); +#48493 = EDGE_CURVE('',#41509,#44902,#48494,.T.); +#48494 = SURFACE_CURVE('',#48495,(#48499,#48506),.PCURVE_S1.); +#48495 = LINE('',#48496,#48497); +#48496 = CARTESIAN_POINT('',(138.620462,-133.095024,0.)); +#48497 = VECTOR('',#48498,1.); +#48498 = DIRECTION('',(0.,0.,1.)); +#48499 = PCURVE('',#41524,#48500); +#48500 = DEFINITIONAL_REPRESENTATION('',(#48501),#48505); +#48501 = LINE('',#48502,#48503); +#48502 = CARTESIAN_POINT('',(28.066769055749,0.)); +#48503 = VECTOR('',#48504,1.); +#48504 = DIRECTION('',(0.,-1.)); +#48505 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48506 = PCURVE('',#41552,#48507); +#48507 = DEFINITIONAL_REPRESENTATION('',(#48508),#48512); +#48508 = LINE('',#48509,#48510); +#48509 = CARTESIAN_POINT('',(0.,0.)); +#48510 = VECTOR('',#48511,1.); +#48511 = DIRECTION('',(0.,-1.)); +#48512 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48513 = ORIENTED_EDGE('',*,*,#41508,.F.); +#48514 = ADVANCED_FACE('',(#48515),#41608,.T.); +#48515 = FACE_BOUND('',#48516,.T.); +#48516 = EDGE_LOOP('',(#48517,#48538,#48539,#48540)); +#48517 = ORIENTED_EDGE('',*,*,#48518,.T.); +#48518 = EDGE_CURVE('',#41565,#44948,#48519,.T.); +#48519 = SURFACE_CURVE('',#48520,(#48524,#48531),.PCURVE_S1.); +#48520 = LINE('',#48521,#48522); +#48521 = CARTESIAN_POINT('',(138.546346,-132.4372,0.)); +#48522 = VECTOR('',#48523,1.); +#48523 = DIRECTION('',(0.,0.,1.)); +#48524 = PCURVE('',#41608,#48525); +#48525 = DEFINITIONAL_REPRESENTATION('',(#48526),#48530); +#48526 = LINE('',#48527,#48528); +#48527 = CARTESIAN_POINT('',(0.,0.)); +#48528 = VECTOR('',#48529,1.); +#48529 = DIRECTION('',(0.,-1.)); +#48530 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48531 = PCURVE('',#41580,#48532); +#48532 = DEFINITIONAL_REPRESENTATION('',(#48533),#48537); +#48533 = LINE('',#48534,#48535); +#48534 = CARTESIAN_POINT('',(0.331514663932,0.)); +#48535 = VECTOR('',#48536,1.); +#48536 = DIRECTION('',(0.,-1.)); +#48537 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48538 = ORIENTED_EDGE('',*,*,#44970,.T.); +#48539 = ORIENTED_EDGE('',*,*,#48464,.F.); +#48540 = ORIENTED_EDGE('',*,*,#41592,.F.); +#48541 = ADVANCED_FACE('',(#48542),#41552,.T.); +#48542 = FACE_BOUND('',#48543,.T.); +#48543 = EDGE_LOOP('',(#48544,#48545,#48546,#48567)); +#48544 = ORIENTED_EDGE('',*,*,#48493,.T.); +#48545 = ORIENTED_EDGE('',*,*,#44924,.T.); +#48546 = ORIENTED_EDGE('',*,*,#48547,.F.); +#48547 = EDGE_CURVE('',#41537,#44925,#48548,.T.); +#48548 = SURFACE_CURVE('',#48549,(#48553,#48560),.PCURVE_S1.); +#48549 = LINE('',#48550,#48551); +#48550 = CARTESIAN_POINT('',(138.601875,-132.764031,0.)); +#48551 = VECTOR('',#48552,1.); +#48552 = DIRECTION('',(0.,0.,1.)); +#48553 = PCURVE('',#41552,#48554); +#48554 = DEFINITIONAL_REPRESENTATION('',(#48555),#48559); +#48555 = LINE('',#48556,#48557); +#48556 = CARTESIAN_POINT('',(0.331514468188,0.)); +#48557 = VECTOR('',#48558,1.); +#48558 = DIRECTION('',(0.,-1.)); +#48559 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48560 = PCURVE('',#41580,#48561); +#48561 = DEFINITIONAL_REPRESENTATION('',(#48562),#48566); +#48562 = LINE('',#48563,#48564); +#48563 = CARTESIAN_POINT('',(0.,0.)); +#48564 = VECTOR('',#48565,1.); +#48565 = DIRECTION('',(0.,-1.)); +#48566 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48567 = ORIENTED_EDGE('',*,*,#41536,.F.); +#48568 = ADVANCED_FACE('',(#48569),#41580,.T.); +#48569 = FACE_BOUND('',#48570,.T.); +#48570 = EDGE_LOOP('',(#48571,#48572,#48573,#48574)); +#48571 = ORIENTED_EDGE('',*,*,#48547,.T.); +#48572 = ORIENTED_EDGE('',*,*,#44947,.T.); +#48573 = ORIENTED_EDGE('',*,*,#48518,.F.); +#48574 = ORIENTED_EDGE('',*,*,#41564,.F.); +#48575 = ADVANCED_FACE('',(#48576),#42278,.F.); +#48576 = FACE_BOUND('',#48577,.F.); +#48577 = EDGE_LOOP('',(#48578,#48599,#48600,#48621)); +#48578 = ORIENTED_EDGE('',*,*,#48579,.T.); +#48579 = EDGE_CURVE('',#42261,#45524,#48580,.T.); +#48580 = SURFACE_CURVE('',#48581,(#48585,#48592),.PCURVE_S1.); +#48581 = LINE('',#48582,#48583); +#48582 = CARTESIAN_POINT('',(167.777887,-50.067303,0.)); +#48583 = VECTOR('',#48584,1.); +#48584 = DIRECTION('',(0.,0.,1.)); +#48585 = PCURVE('',#42278,#48586); +#48586 = DEFINITIONAL_REPRESENTATION('',(#48587),#48591); +#48587 = LINE('',#48588,#48589); +#48588 = CARTESIAN_POINT('',(0.,0.)); +#48589 = VECTOR('',#48590,1.); +#48590 = DIRECTION('',(0.,-1.)); +#48591 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48592 = PCURVE('',#42306,#48593); +#48593 = DEFINITIONAL_REPRESENTATION('',(#48594),#48598); +#48594 = LINE('',#48595,#48596); +#48595 = CARTESIAN_POINT('',(0.235320506384,0.)); +#48596 = VECTOR('',#48597,1.); +#48597 = DIRECTION('',(0.,-1.)); +#48598 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48599 = ORIENTED_EDGE('',*,*,#45523,.T.); +#48600 = ORIENTED_EDGE('',*,*,#48601,.F.); +#48601 = EDGE_CURVE('',#42263,#45526,#48602,.T.); +#48602 = SURFACE_CURVE('',#48603,(#48607,#48614),.PCURVE_S1.); +#48603 = LINE('',#48604,#48605); +#48604 = CARTESIAN_POINT('',(168.005189,-50.128208,0.)); +#48605 = VECTOR('',#48606,1.); +#48606 = DIRECTION('',(0.,0.,1.)); +#48607 = PCURVE('',#42278,#48608); +#48608 = DEFINITIONAL_REPRESENTATION('',(#48609),#48613); +#48609 = LINE('',#48610,#48611); +#48610 = CARTESIAN_POINT('',(0.235320246109,0.)); +#48611 = VECTOR('',#48612,1.); +#48612 = DIRECTION('',(0.,-1.)); +#48613 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48614 = PCURVE('',#43312,#48615); +#48615 = DEFINITIONAL_REPRESENTATION('',(#48616),#48620); +#48616 = LINE('',#48617,#48618); +#48617 = CARTESIAN_POINT('',(0.,0.)); +#48618 = VECTOR('',#48619,1.); +#48619 = DIRECTION('',(0.,-1.)); +#48620 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48621 = ORIENTED_EDGE('',*,*,#42260,.F.); +#48622 = ADVANCED_FACE('',(#48623),#43312,.F.); +#48623 = FACE_BOUND('',#48624,.F.); +#48624 = EDGE_LOOP('',(#48625,#48626,#48627,#48648)); +#48625 = ORIENTED_EDGE('',*,*,#48601,.T.); +#48626 = ORIENTED_EDGE('',*,*,#46376,.T.); +#48627 = ORIENTED_EDGE('',*,*,#48628,.F.); +#48628 = EDGE_CURVE('',#43271,#46354,#48629,.T.); +#48629 = SURFACE_CURVE('',#48630,(#48634,#48641),.PCURVE_S1.); +#48630 = LINE('',#48631,#48632); +#48631 = CARTESIAN_POINT('',(168.218462,-50.227659,0.)); +#48632 = VECTOR('',#48633,1.); +#48633 = DIRECTION('',(0.,0.,1.)); +#48634 = PCURVE('',#43312,#48635); +#48635 = DEFINITIONAL_REPRESENTATION('',(#48636),#48640); +#48636 = LINE('',#48637,#48638); +#48637 = CARTESIAN_POINT('',(0.235320789413,0.)); +#48638 = VECTOR('',#48639,1.); +#48639 = DIRECTION('',(0.,-1.)); +#48640 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48641 = PCURVE('',#43286,#48642); +#48642 = DEFINITIONAL_REPRESENTATION('',(#48643),#48647); +#48643 = LINE('',#48644,#48645); +#48644 = CARTESIAN_POINT('',(0.,0.)); +#48645 = VECTOR('',#48646,1.); +#48646 = DIRECTION('',(0.,-1.)); +#48647 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48648 = ORIENTED_EDGE('',*,*,#43298,.F.); +#48649 = ADVANCED_FACE('',(#48650),#43286,.F.); +#48650 = FACE_BOUND('',#48651,.F.); +#48651 = EDGE_LOOP('',(#48652,#48653,#48654,#48675)); +#48652 = ORIENTED_EDGE('',*,*,#48628,.T.); +#48653 = ORIENTED_EDGE('',*,*,#46353,.T.); +#48654 = ORIENTED_EDGE('',*,*,#48655,.F.); +#48655 = EDGE_CURVE('',#43243,#46331,#48656,.T.); +#48656 = SURFACE_CURVE('',#48657,(#48661,#48668),.PCURVE_S1.); +#48657 = LINE('',#48658,#48659); +#48658 = CARTESIAN_POINT('',(168.411225,-50.362633,0.)); +#48659 = VECTOR('',#48660,1.); +#48660 = DIRECTION('',(0.,0.,1.)); +#48661 = PCURVE('',#43286,#48662); +#48662 = DEFINITIONAL_REPRESENTATION('',(#48663),#48667); +#48663 = LINE('',#48664,#48665); +#48664 = CARTESIAN_POINT('',(0.235320111433,0.)); +#48665 = VECTOR('',#48666,1.); +#48666 = DIRECTION('',(0.,-1.)); +#48667 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48668 = PCURVE('',#43258,#48669); +#48669 = DEFINITIONAL_REPRESENTATION('',(#48670),#48674); +#48670 = LINE('',#48671,#48672); +#48671 = CARTESIAN_POINT('',(0.,0.)); +#48672 = VECTOR('',#48673,1.); +#48673 = DIRECTION('',(0.,-1.)); +#48674 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48675 = ORIENTED_EDGE('',*,*,#43270,.F.); +#48676 = ADVANCED_FACE('',(#48677),#43258,.F.); +#48677 = FACE_BOUND('',#48678,.F.); +#48678 = EDGE_LOOP('',(#48679,#48680,#48681,#48702)); +#48679 = ORIENTED_EDGE('',*,*,#48655,.T.); +#48680 = ORIENTED_EDGE('',*,*,#46330,.T.); +#48681 = ORIENTED_EDGE('',*,*,#48682,.F.); +#48682 = EDGE_CURVE('',#43215,#46308,#48683,.T.); +#48683 = SURFACE_CURVE('',#48684,(#48688,#48695),.PCURVE_S1.); +#48684 = LINE('',#48685,#48686); +#48685 = CARTESIAN_POINT('',(168.577622,-50.52903,0.)); +#48686 = VECTOR('',#48687,1.); +#48687 = DIRECTION('',(0.,0.,1.)); +#48688 = PCURVE('',#43258,#48689); +#48689 = DEFINITIONAL_REPRESENTATION('',(#48690),#48694); +#48690 = LINE('',#48691,#48692); +#48691 = CARTESIAN_POINT('',(0.235320894138,0.)); +#48692 = VECTOR('',#48693,1.); +#48693 = DIRECTION('',(0.,-1.)); +#48694 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48695 = PCURVE('',#43230,#48696); +#48696 = DEFINITIONAL_REPRESENTATION('',(#48697),#48701); +#48697 = LINE('',#48698,#48699); +#48698 = CARTESIAN_POINT('',(0.,0.)); +#48699 = VECTOR('',#48700,1.); +#48700 = DIRECTION('',(0.,-1.)); +#48701 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48702 = ORIENTED_EDGE('',*,*,#43242,.F.); +#48703 = ADVANCED_FACE('',(#48704),#43230,.F.); +#48704 = FACE_BOUND('',#48705,.F.); +#48705 = EDGE_LOOP('',(#48706,#48707,#48708,#48729)); +#48706 = ORIENTED_EDGE('',*,*,#48682,.T.); +#48707 = ORIENTED_EDGE('',*,*,#46307,.T.); +#48708 = ORIENTED_EDGE('',*,*,#48709,.F.); +#48709 = EDGE_CURVE('',#43187,#46285,#48710,.T.); +#48710 = SURFACE_CURVE('',#48711,(#48715,#48722),.PCURVE_S1.); +#48711 = LINE('',#48712,#48713); +#48712 = CARTESIAN_POINT('',(168.712596,-50.721793,0.)); +#48713 = VECTOR('',#48714,1.); +#48714 = DIRECTION('',(0.,0.,1.)); +#48715 = PCURVE('',#43230,#48716); +#48716 = DEFINITIONAL_REPRESENTATION('',(#48717),#48721); +#48717 = LINE('',#48718,#48719); +#48718 = CARTESIAN_POINT('',(0.235320111433,0.)); +#48719 = VECTOR('',#48720,1.); +#48720 = DIRECTION('',(0.,-1.)); +#48721 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48722 = PCURVE('',#43202,#48723); +#48723 = DEFINITIONAL_REPRESENTATION('',(#48724),#48728); +#48724 = LINE('',#48725,#48726); +#48725 = CARTESIAN_POINT('',(0.,0.)); +#48726 = VECTOR('',#48727,1.); +#48727 = DIRECTION('',(0.,-1.)); +#48728 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48729 = ORIENTED_EDGE('',*,*,#43214,.F.); +#48730 = ADVANCED_FACE('',(#48731),#43202,.F.); +#48731 = FACE_BOUND('',#48732,.F.); +#48732 = EDGE_LOOP('',(#48733,#48734,#48735,#48756)); +#48733 = ORIENTED_EDGE('',*,*,#48709,.T.); +#48734 = ORIENTED_EDGE('',*,*,#46284,.T.); +#48735 = ORIENTED_EDGE('',*,*,#48736,.F.); +#48736 = EDGE_CURVE('',#43159,#46262,#48737,.T.); +#48737 = SURFACE_CURVE('',#48738,(#48742,#48749),.PCURVE_S1.); +#48738 = LINE('',#48739,#48740); +#48739 = CARTESIAN_POINT('',(168.812047,-50.935066,0.)); +#48740 = VECTOR('',#48741,1.); +#48741 = DIRECTION('',(0.,0.,1.)); +#48742 = PCURVE('',#43202,#48743); +#48743 = DEFINITIONAL_REPRESENTATION('',(#48744),#48748); +#48744 = LINE('',#48745,#48746); +#48745 = CARTESIAN_POINT('',(0.235320789413,0.)); +#48746 = VECTOR('',#48747,1.); +#48747 = DIRECTION('',(0.,-1.)); +#48748 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48749 = PCURVE('',#43174,#48750); +#48750 = DEFINITIONAL_REPRESENTATION('',(#48751),#48755); +#48751 = LINE('',#48752,#48753); +#48752 = CARTESIAN_POINT('',(0.,0.)); +#48753 = VECTOR('',#48754,1.); +#48754 = DIRECTION('',(0.,-1.)); +#48755 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48756 = ORIENTED_EDGE('',*,*,#43186,.F.); +#48757 = ADVANCED_FACE('',(#48758),#43174,.F.); +#48758 = FACE_BOUND('',#48759,.F.); +#48759 = EDGE_LOOP('',(#48760,#48761,#48762,#48783)); +#48760 = ORIENTED_EDGE('',*,*,#48736,.T.); +#48761 = ORIENTED_EDGE('',*,*,#46261,.T.); +#48762 = ORIENTED_EDGE('',*,*,#48763,.F.); +#48763 = EDGE_CURVE('',#43131,#46239,#48764,.T.); +#48764 = SURFACE_CURVE('',#48765,(#48769,#48776),.PCURVE_S1.); +#48765 = LINE('',#48766,#48767); +#48766 = CARTESIAN_POINT('',(168.872952,-51.162368,0.)); +#48767 = VECTOR('',#48768,1.); +#48768 = DIRECTION('',(0.,0.,1.)); +#48769 = PCURVE('',#43174,#48770); +#48770 = DEFINITIONAL_REPRESENTATION('',(#48771),#48775); +#48771 = LINE('',#48772,#48773); +#48772 = CARTESIAN_POINT('',(0.235320246109,0.)); +#48773 = VECTOR('',#48774,1.); +#48774 = DIRECTION('',(0.,-1.)); +#48775 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48776 = PCURVE('',#43146,#48777); +#48777 = DEFINITIONAL_REPRESENTATION('',(#48778),#48782); +#48778 = LINE('',#48779,#48780); +#48779 = CARTESIAN_POINT('',(0.,0.)); +#48780 = VECTOR('',#48781,1.); +#48781 = DIRECTION('',(0.,-1.)); +#48782 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48783 = ORIENTED_EDGE('',*,*,#43158,.F.); +#48784 = ADVANCED_FACE('',(#48785),#43146,.F.); +#48785 = FACE_BOUND('',#48786,.F.); +#48786 = EDGE_LOOP('',(#48787,#48788,#48789,#48810)); +#48787 = ORIENTED_EDGE('',*,*,#48763,.T.); +#48788 = ORIENTED_EDGE('',*,*,#46238,.T.); +#48789 = ORIENTED_EDGE('',*,*,#48790,.F.); +#48790 = EDGE_CURVE('',#43103,#46216,#48791,.T.); +#48791 = SURFACE_CURVE('',#48792,(#48796,#48803),.PCURVE_S1.); +#48792 = LINE('',#48793,#48794); +#48793 = CARTESIAN_POINT('',(168.893462,-51.396793,0.)); +#48794 = VECTOR('',#48795,1.); +#48795 = DIRECTION('',(0.,0.,1.)); +#48796 = PCURVE('',#43146,#48797); +#48797 = DEFINITIONAL_REPRESENTATION('',(#48798),#48802); +#48798 = LINE('',#48799,#48800); +#48799 = CARTESIAN_POINT('',(0.235320506384,0.)); +#48800 = VECTOR('',#48801,1.); +#48801 = DIRECTION('',(0.,-1.)); +#48802 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48803 = PCURVE('',#43118,#48804); +#48804 = DEFINITIONAL_REPRESENTATION('',(#48805),#48809); +#48805 = LINE('',#48806,#48807); +#48806 = CARTESIAN_POINT('',(0.,0.)); +#48807 = VECTOR('',#48808,1.); +#48808 = DIRECTION('',(0.,-1.)); +#48809 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48810 = ORIENTED_EDGE('',*,*,#43130,.F.); +#48811 = ADVANCED_FACE('',(#48812),#43118,.F.); +#48812 = FACE_BOUND('',#48813,.F.); +#48813 = EDGE_LOOP('',(#48814,#48815,#48816,#48837)); +#48814 = ORIENTED_EDGE('',*,*,#48790,.T.); +#48815 = ORIENTED_EDGE('',*,*,#46215,.T.); +#48816 = ORIENTED_EDGE('',*,*,#48817,.F.); +#48817 = EDGE_CURVE('',#43075,#46193,#48818,.T.); +#48818 = SURFACE_CURVE('',#48819,(#48823,#48830),.PCURVE_S1.); +#48819 = LINE('',#48820,#48821); +#48820 = CARTESIAN_POINT('',(168.872952,-51.631218,0.)); +#48821 = VECTOR('',#48822,1.); +#48822 = DIRECTION('',(0.,0.,1.)); +#48823 = PCURVE('',#43118,#48824); +#48824 = DEFINITIONAL_REPRESENTATION('',(#48825),#48829); +#48825 = LINE('',#48826,#48827); +#48826 = CARTESIAN_POINT('',(0.235320506384,0.)); +#48827 = VECTOR('',#48828,1.); +#48828 = DIRECTION('',(0.,-1.)); +#48829 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48830 = PCURVE('',#43090,#48831); +#48831 = DEFINITIONAL_REPRESENTATION('',(#48832),#48836); +#48832 = LINE('',#48833,#48834); +#48833 = CARTESIAN_POINT('',(0.,0.)); +#48834 = VECTOR('',#48835,1.); +#48835 = DIRECTION('',(0.,-1.)); +#48836 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48837 = ORIENTED_EDGE('',*,*,#43102,.F.); +#48838 = ADVANCED_FACE('',(#48839),#43090,.F.); +#48839 = FACE_BOUND('',#48840,.F.); +#48840 = EDGE_LOOP('',(#48841,#48842,#48843,#48864)); +#48841 = ORIENTED_EDGE('',*,*,#48817,.T.); +#48842 = ORIENTED_EDGE('',*,*,#46192,.T.); +#48843 = ORIENTED_EDGE('',*,*,#48844,.F.); +#48844 = EDGE_CURVE('',#43047,#46170,#48845,.T.); +#48845 = SURFACE_CURVE('',#48846,(#48850,#48857),.PCURVE_S1.); +#48846 = LINE('',#48847,#48848); +#48847 = CARTESIAN_POINT('',(168.812047,-51.85852,0.)); +#48848 = VECTOR('',#48849,1.); +#48849 = DIRECTION('',(0.,0.,1.)); +#48850 = PCURVE('',#43090,#48851); +#48851 = DEFINITIONAL_REPRESENTATION('',(#48852),#48856); +#48852 = LINE('',#48853,#48854); +#48853 = CARTESIAN_POINT('',(0.235320246109,0.)); +#48854 = VECTOR('',#48855,1.); +#48855 = DIRECTION('',(0.,-1.)); +#48856 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48857 = PCURVE('',#43062,#48858); +#48858 = DEFINITIONAL_REPRESENTATION('',(#48859),#48863); +#48859 = LINE('',#48860,#48861); +#48860 = CARTESIAN_POINT('',(0.,0.)); +#48861 = VECTOR('',#48862,1.); +#48862 = DIRECTION('',(0.,-1.)); +#48863 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48864 = ORIENTED_EDGE('',*,*,#43074,.F.); +#48865 = ADVANCED_FACE('',(#48866),#43062,.F.); +#48866 = FACE_BOUND('',#48867,.F.); +#48867 = EDGE_LOOP('',(#48868,#48869,#48870,#48891)); +#48868 = ORIENTED_EDGE('',*,*,#48844,.T.); +#48869 = ORIENTED_EDGE('',*,*,#46169,.T.); +#48870 = ORIENTED_EDGE('',*,*,#48871,.F.); +#48871 = EDGE_CURVE('',#43019,#46147,#48872,.T.); +#48872 = SURFACE_CURVE('',#48873,(#48877,#48884),.PCURVE_S1.); +#48873 = LINE('',#48874,#48875); +#48874 = CARTESIAN_POINT('',(168.712596,-52.071793,0.)); +#48875 = VECTOR('',#48876,1.); +#48876 = DIRECTION('',(0.,0.,1.)); +#48877 = PCURVE('',#43062,#48878); +#48878 = DEFINITIONAL_REPRESENTATION('',(#48879),#48883); +#48879 = LINE('',#48880,#48881); +#48880 = CARTESIAN_POINT('',(0.235320789413,0.)); +#48881 = VECTOR('',#48882,1.); +#48882 = DIRECTION('',(0.,-1.)); +#48883 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48884 = PCURVE('',#43034,#48885); +#48885 = DEFINITIONAL_REPRESENTATION('',(#48886),#48890); +#48886 = LINE('',#48887,#48888); +#48887 = CARTESIAN_POINT('',(0.,0.)); +#48888 = VECTOR('',#48889,1.); +#48889 = DIRECTION('',(0.,-1.)); +#48890 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48891 = ORIENTED_EDGE('',*,*,#43046,.F.); +#48892 = ADVANCED_FACE('',(#48893),#43034,.F.); +#48893 = FACE_BOUND('',#48894,.F.); +#48894 = EDGE_LOOP('',(#48895,#48896,#48897,#48918)); +#48895 = ORIENTED_EDGE('',*,*,#48871,.T.); +#48896 = ORIENTED_EDGE('',*,*,#46146,.T.); +#48897 = ORIENTED_EDGE('',*,*,#48898,.F.); +#48898 = EDGE_CURVE('',#42991,#46124,#48899,.T.); +#48899 = SURFACE_CURVE('',#48900,(#48904,#48911),.PCURVE_S1.); +#48900 = LINE('',#48901,#48902); +#48901 = CARTESIAN_POINT('',(168.577622,-52.264556,0.)); +#48902 = VECTOR('',#48903,1.); +#48903 = DIRECTION('',(0.,0.,1.)); +#48904 = PCURVE('',#43034,#48905); +#48905 = DEFINITIONAL_REPRESENTATION('',(#48906),#48910); +#48906 = LINE('',#48907,#48908); +#48907 = CARTESIAN_POINT('',(0.235320111433,0.)); +#48908 = VECTOR('',#48909,1.); +#48909 = DIRECTION('',(0.,-1.)); +#48910 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48911 = PCURVE('',#43006,#48912); +#48912 = DEFINITIONAL_REPRESENTATION('',(#48913),#48917); +#48913 = LINE('',#48914,#48915); +#48914 = CARTESIAN_POINT('',(0.,0.)); +#48915 = VECTOR('',#48916,1.); +#48916 = DIRECTION('',(0.,-1.)); +#48917 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48918 = ORIENTED_EDGE('',*,*,#43018,.F.); +#48919 = ADVANCED_FACE('',(#48920),#43006,.F.); +#48920 = FACE_BOUND('',#48921,.F.); +#48921 = EDGE_LOOP('',(#48922,#48923,#48924,#48945)); +#48922 = ORIENTED_EDGE('',*,*,#48898,.T.); +#48923 = ORIENTED_EDGE('',*,*,#46123,.T.); +#48924 = ORIENTED_EDGE('',*,*,#48925,.F.); +#48925 = EDGE_CURVE('',#42963,#46101,#48926,.T.); +#48926 = SURFACE_CURVE('',#48927,(#48931,#48938),.PCURVE_S1.); +#48927 = LINE('',#48928,#48929); +#48928 = CARTESIAN_POINT('',(168.411225,-52.430953,0.)); +#48929 = VECTOR('',#48930,1.); +#48930 = DIRECTION('',(0.,0.,1.)); +#48931 = PCURVE('',#43006,#48932); +#48932 = DEFINITIONAL_REPRESENTATION('',(#48933),#48937); +#48933 = LINE('',#48934,#48935); +#48934 = CARTESIAN_POINT('',(0.235320894138,0.)); +#48935 = VECTOR('',#48936,1.); +#48936 = DIRECTION('',(0.,-1.)); +#48937 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48938 = PCURVE('',#42978,#48939); +#48939 = DEFINITIONAL_REPRESENTATION('',(#48940),#48944); +#48940 = LINE('',#48941,#48942); +#48941 = CARTESIAN_POINT('',(0.,0.)); +#48942 = VECTOR('',#48943,1.); +#48943 = DIRECTION('',(0.,-1.)); +#48944 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48945 = ORIENTED_EDGE('',*,*,#42990,.F.); +#48946 = ADVANCED_FACE('',(#48947),#42978,.F.); +#48947 = FACE_BOUND('',#48948,.F.); +#48948 = EDGE_LOOP('',(#48949,#48950,#48951,#48972)); +#48949 = ORIENTED_EDGE('',*,*,#48925,.T.); +#48950 = ORIENTED_EDGE('',*,*,#46100,.T.); +#48951 = ORIENTED_EDGE('',*,*,#48952,.F.); +#48952 = EDGE_CURVE('',#42935,#46078,#48953,.T.); +#48953 = SURFACE_CURVE('',#48954,(#48958,#48965),.PCURVE_S1.); +#48954 = LINE('',#48955,#48956); +#48955 = CARTESIAN_POINT('',(168.218462,-52.565927,0.)); +#48956 = VECTOR('',#48957,1.); +#48957 = DIRECTION('',(0.,0.,1.)); +#48958 = PCURVE('',#42978,#48959); +#48959 = DEFINITIONAL_REPRESENTATION('',(#48960),#48964); +#48960 = LINE('',#48961,#48962); +#48961 = CARTESIAN_POINT('',(0.235320111433,0.)); +#48962 = VECTOR('',#48963,1.); +#48963 = DIRECTION('',(0.,-1.)); +#48964 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48965 = PCURVE('',#42950,#48966); +#48966 = DEFINITIONAL_REPRESENTATION('',(#48967),#48971); +#48967 = LINE('',#48968,#48969); +#48968 = CARTESIAN_POINT('',(0.,0.)); +#48969 = VECTOR('',#48970,1.); +#48970 = DIRECTION('',(0.,-1.)); +#48971 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48972 = ORIENTED_EDGE('',*,*,#42962,.F.); +#48973 = ADVANCED_FACE('',(#48974),#42950,.F.); +#48974 = FACE_BOUND('',#48975,.F.); +#48975 = EDGE_LOOP('',(#48976,#48977,#48978,#48999)); +#48976 = ORIENTED_EDGE('',*,*,#48952,.T.); +#48977 = ORIENTED_EDGE('',*,*,#46077,.T.); +#48978 = ORIENTED_EDGE('',*,*,#48979,.F.); +#48979 = EDGE_CURVE('',#42907,#46055,#48980,.T.); +#48980 = SURFACE_CURVE('',#48981,(#48985,#48992),.PCURVE_S1.); +#48981 = LINE('',#48982,#48983); +#48982 = CARTESIAN_POINT('',(168.005189,-52.665378,0.)); +#48983 = VECTOR('',#48984,1.); +#48984 = DIRECTION('',(0.,0.,1.)); +#48985 = PCURVE('',#42950,#48986); +#48986 = DEFINITIONAL_REPRESENTATION('',(#48987),#48991); +#48987 = LINE('',#48988,#48989); +#48988 = CARTESIAN_POINT('',(0.235320789413,0.)); +#48989 = VECTOR('',#48990,1.); +#48990 = DIRECTION('',(0.,-1.)); +#48991 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48992 = PCURVE('',#42922,#48993); +#48993 = DEFINITIONAL_REPRESENTATION('',(#48994),#48998); +#48994 = LINE('',#48995,#48996); +#48995 = CARTESIAN_POINT('',(0.,0.)); +#48996 = VECTOR('',#48997,1.); +#48997 = DIRECTION('',(0.,-1.)); +#48998 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#48999 = ORIENTED_EDGE('',*,*,#42934,.F.); +#49000 = ADVANCED_FACE('',(#49001),#42922,.F.); +#49001 = FACE_BOUND('',#49002,.F.); +#49002 = EDGE_LOOP('',(#49003,#49004,#49005,#49026)); +#49003 = ORIENTED_EDGE('',*,*,#48979,.T.); +#49004 = ORIENTED_EDGE('',*,*,#46054,.T.); +#49005 = ORIENTED_EDGE('',*,*,#49006,.F.); +#49006 = EDGE_CURVE('',#42879,#46032,#49007,.T.); +#49007 = SURFACE_CURVE('',#49008,(#49012,#49019),.PCURVE_S1.); +#49008 = LINE('',#49009,#49010); +#49009 = CARTESIAN_POINT('',(167.777887,-52.726283,0.)); +#49010 = VECTOR('',#49011,1.); +#49011 = DIRECTION('',(0.,0.,1.)); +#49012 = PCURVE('',#42922,#49013); +#49013 = DEFINITIONAL_REPRESENTATION('',(#49014),#49018); +#49014 = LINE('',#49015,#49016); +#49015 = CARTESIAN_POINT('',(0.235320246109,0.)); +#49016 = VECTOR('',#49017,1.); +#49017 = DIRECTION('',(0.,-1.)); +#49018 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49019 = PCURVE('',#42894,#49020); +#49020 = DEFINITIONAL_REPRESENTATION('',(#49021),#49025); +#49021 = LINE('',#49022,#49023); +#49022 = CARTESIAN_POINT('',(0.,0.)); +#49023 = VECTOR('',#49024,1.); +#49024 = DIRECTION('',(0.,-1.)); +#49025 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49026 = ORIENTED_EDGE('',*,*,#42906,.F.); +#49027 = ADVANCED_FACE('',(#49028),#42894,.F.); +#49028 = FACE_BOUND('',#49029,.F.); +#49029 = EDGE_LOOP('',(#49030,#49031,#49032,#49053)); +#49030 = ORIENTED_EDGE('',*,*,#49006,.T.); +#49031 = ORIENTED_EDGE('',*,*,#46031,.T.); +#49032 = ORIENTED_EDGE('',*,*,#49033,.F.); +#49033 = EDGE_CURVE('',#42851,#46009,#49034,.T.); +#49034 = SURFACE_CURVE('',#49035,(#49039,#49046),.PCURVE_S1.); +#49035 = LINE('',#49036,#49037); +#49036 = CARTESIAN_POINT('',(167.543462,-52.746793,0.)); +#49037 = VECTOR('',#49038,1.); +#49038 = DIRECTION('',(0.,0.,1.)); +#49039 = PCURVE('',#42894,#49040); +#49040 = DEFINITIONAL_REPRESENTATION('',(#49041),#49045); +#49041 = LINE('',#49042,#49043); +#49042 = CARTESIAN_POINT('',(0.235320506384,0.)); +#49043 = VECTOR('',#49044,1.); +#49044 = DIRECTION('',(0.,-1.)); +#49045 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49046 = PCURVE('',#42866,#49047); +#49047 = DEFINITIONAL_REPRESENTATION('',(#49048),#49052); +#49048 = LINE('',#49049,#49050); +#49049 = CARTESIAN_POINT('',(0.,-0.)); +#49050 = VECTOR('',#49051,1.); +#49051 = DIRECTION('',(0.,-1.)); +#49052 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49053 = ORIENTED_EDGE('',*,*,#42878,.F.); +#49054 = ADVANCED_FACE('',(#49055),#42866,.F.); +#49055 = FACE_BOUND('',#49056,.F.); +#49056 = EDGE_LOOP('',(#49057,#49058,#49059,#49080)); +#49057 = ORIENTED_EDGE('',*,*,#49033,.T.); +#49058 = ORIENTED_EDGE('',*,*,#46008,.T.); +#49059 = ORIENTED_EDGE('',*,*,#49060,.F.); +#49060 = EDGE_CURVE('',#42823,#45986,#49061,.T.); +#49061 = SURFACE_CURVE('',#49062,(#49066,#49073),.PCURVE_S1.); +#49062 = LINE('',#49063,#49064); +#49063 = CARTESIAN_POINT('',(166.743462,-52.746793,0.)); +#49064 = VECTOR('',#49065,1.); +#49065 = DIRECTION('',(0.,0.,1.)); +#49066 = PCURVE('',#42866,#49067); +#49067 = DEFINITIONAL_REPRESENTATION('',(#49068),#49072); +#49068 = LINE('',#49069,#49070); +#49069 = CARTESIAN_POINT('',(0.8,0.)); +#49070 = VECTOR('',#49071,1.); +#49071 = DIRECTION('',(0.,-1.)); +#49072 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49073 = PCURVE('',#42838,#49074); +#49074 = DEFINITIONAL_REPRESENTATION('',(#49075),#49079); +#49075 = LINE('',#49076,#49077); +#49076 = CARTESIAN_POINT('',(0.,0.)); +#49077 = VECTOR('',#49078,1.); +#49078 = DIRECTION('',(0.,-1.)); +#49079 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49080 = ORIENTED_EDGE('',*,*,#42850,.F.); +#49081 = ADVANCED_FACE('',(#49082),#42838,.F.); +#49082 = FACE_BOUND('',#49083,.F.); +#49083 = EDGE_LOOP('',(#49084,#49085,#49086,#49107)); +#49084 = ORIENTED_EDGE('',*,*,#49060,.T.); +#49085 = ORIENTED_EDGE('',*,*,#45985,.T.); +#49086 = ORIENTED_EDGE('',*,*,#49087,.F.); +#49087 = EDGE_CURVE('',#42795,#45963,#49088,.T.); +#49088 = SURFACE_CURVE('',#49089,(#49093,#49100),.PCURVE_S1.); +#49089 = LINE('',#49090,#49091); +#49090 = CARTESIAN_POINT('',(166.509037,-52.726283,0.)); +#49091 = VECTOR('',#49092,1.); +#49092 = DIRECTION('',(0.,0.,1.)); +#49093 = PCURVE('',#42838,#49094); +#49094 = DEFINITIONAL_REPRESENTATION('',(#49095),#49099); +#49095 = LINE('',#49096,#49097); +#49096 = CARTESIAN_POINT('',(0.235320506384,0.)); +#49097 = VECTOR('',#49098,1.); +#49098 = DIRECTION('',(0.,-1.)); +#49099 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49100 = PCURVE('',#42810,#49101); +#49101 = DEFINITIONAL_REPRESENTATION('',(#49102),#49106); +#49102 = LINE('',#49103,#49104); +#49103 = CARTESIAN_POINT('',(0.,0.)); +#49104 = VECTOR('',#49105,1.); +#49105 = DIRECTION('',(0.,-1.)); +#49106 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49107 = ORIENTED_EDGE('',*,*,#42822,.F.); +#49108 = ADVANCED_FACE('',(#49109),#42810,.F.); +#49109 = FACE_BOUND('',#49110,.F.); +#49110 = EDGE_LOOP('',(#49111,#49112,#49113,#49134)); +#49111 = ORIENTED_EDGE('',*,*,#49087,.T.); +#49112 = ORIENTED_EDGE('',*,*,#45962,.T.); +#49113 = ORIENTED_EDGE('',*,*,#49114,.F.); +#49114 = EDGE_CURVE('',#42767,#45940,#49115,.T.); +#49115 = SURFACE_CURVE('',#49116,(#49120,#49127),.PCURVE_S1.); +#49116 = LINE('',#49117,#49118); +#49117 = CARTESIAN_POINT('',(166.281735,-52.665378,0.)); +#49118 = VECTOR('',#49119,1.); +#49119 = DIRECTION('',(0.,0.,1.)); +#49120 = PCURVE('',#42810,#49121); +#49121 = DEFINITIONAL_REPRESENTATION('',(#49122),#49126); +#49122 = LINE('',#49123,#49124); +#49123 = CARTESIAN_POINT('',(0.235320246109,0.)); +#49124 = VECTOR('',#49125,1.); +#49125 = DIRECTION('',(0.,-1.)); +#49126 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49127 = PCURVE('',#42782,#49128); +#49128 = DEFINITIONAL_REPRESENTATION('',(#49129),#49133); +#49129 = LINE('',#49130,#49131); +#49130 = CARTESIAN_POINT('',(0.,0.)); +#49131 = VECTOR('',#49132,1.); +#49132 = DIRECTION('',(0.,-1.)); +#49133 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49134 = ORIENTED_EDGE('',*,*,#42794,.F.); +#49135 = ADVANCED_FACE('',(#49136),#42782,.F.); +#49136 = FACE_BOUND('',#49137,.F.); +#49137 = EDGE_LOOP('',(#49138,#49139,#49140,#49161)); +#49138 = ORIENTED_EDGE('',*,*,#49114,.T.); +#49139 = ORIENTED_EDGE('',*,*,#45939,.T.); +#49140 = ORIENTED_EDGE('',*,*,#49141,.F.); +#49141 = EDGE_CURVE('',#42739,#45917,#49142,.T.); +#49142 = SURFACE_CURVE('',#49143,(#49147,#49154),.PCURVE_S1.); +#49143 = LINE('',#49144,#49145); +#49144 = CARTESIAN_POINT('',(166.068462,-52.565927,0.)); +#49145 = VECTOR('',#49146,1.); +#49146 = DIRECTION('',(0.,0.,1.)); +#49147 = PCURVE('',#42782,#49148); +#49148 = DEFINITIONAL_REPRESENTATION('',(#49149),#49153); +#49149 = LINE('',#49150,#49151); +#49150 = CARTESIAN_POINT('',(0.235320789413,0.)); +#49151 = VECTOR('',#49152,1.); +#49152 = DIRECTION('',(0.,-1.)); +#49153 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49154 = PCURVE('',#42754,#49155); +#49155 = DEFINITIONAL_REPRESENTATION('',(#49156),#49160); +#49156 = LINE('',#49157,#49158); +#49157 = CARTESIAN_POINT('',(0.,0.)); +#49158 = VECTOR('',#49159,1.); +#49159 = DIRECTION('',(0.,-1.)); +#49160 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49161 = ORIENTED_EDGE('',*,*,#42766,.F.); +#49162 = ADVANCED_FACE('',(#49163),#42754,.F.); +#49163 = FACE_BOUND('',#49164,.F.); +#49164 = EDGE_LOOP('',(#49165,#49166,#49167,#49188)); +#49165 = ORIENTED_EDGE('',*,*,#49141,.T.); +#49166 = ORIENTED_EDGE('',*,*,#45916,.T.); +#49167 = ORIENTED_EDGE('',*,*,#49168,.F.); +#49168 = EDGE_CURVE('',#42711,#45894,#49169,.T.); +#49169 = SURFACE_CURVE('',#49170,(#49174,#49181),.PCURVE_S1.); +#49170 = LINE('',#49171,#49172); +#49171 = CARTESIAN_POINT('',(165.875699,-52.430953,0.)); +#49172 = VECTOR('',#49173,1.); +#49173 = DIRECTION('',(0.,0.,1.)); +#49174 = PCURVE('',#42754,#49175); +#49175 = DEFINITIONAL_REPRESENTATION('',(#49176),#49180); +#49176 = LINE('',#49177,#49178); +#49177 = CARTESIAN_POINT('',(0.235320111433,0.)); +#49178 = VECTOR('',#49179,1.); +#49179 = DIRECTION('',(0.,-1.)); +#49180 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49181 = PCURVE('',#42726,#49182); +#49182 = DEFINITIONAL_REPRESENTATION('',(#49183),#49187); +#49183 = LINE('',#49184,#49185); +#49184 = CARTESIAN_POINT('',(0.,0.)); +#49185 = VECTOR('',#49186,1.); +#49186 = DIRECTION('',(0.,-1.)); +#49187 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49188 = ORIENTED_EDGE('',*,*,#42738,.F.); +#49189 = ADVANCED_FACE('',(#49190),#42726,.F.); +#49190 = FACE_BOUND('',#49191,.F.); +#49191 = EDGE_LOOP('',(#49192,#49193,#49194,#49215)); +#49192 = ORIENTED_EDGE('',*,*,#49168,.T.); +#49193 = ORIENTED_EDGE('',*,*,#45893,.T.); +#49194 = ORIENTED_EDGE('',*,*,#49195,.F.); +#49195 = EDGE_CURVE('',#42683,#45871,#49196,.T.); +#49196 = SURFACE_CURVE('',#49197,(#49201,#49208),.PCURVE_S1.); +#49197 = LINE('',#49198,#49199); +#49198 = CARTESIAN_POINT('',(165.709302,-52.264556,0.)); +#49199 = VECTOR('',#49200,1.); +#49200 = DIRECTION('',(0.,0.,1.)); +#49201 = PCURVE('',#42726,#49202); +#49202 = DEFINITIONAL_REPRESENTATION('',(#49203),#49207); +#49203 = LINE('',#49204,#49205); +#49204 = CARTESIAN_POINT('',(0.235320894138,0.)); +#49205 = VECTOR('',#49206,1.); +#49206 = DIRECTION('',(0.,-1.)); +#49207 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49208 = PCURVE('',#42698,#49209); +#49209 = DEFINITIONAL_REPRESENTATION('',(#49210),#49214); +#49210 = LINE('',#49211,#49212); +#49211 = CARTESIAN_POINT('',(0.,0.)); +#49212 = VECTOR('',#49213,1.); +#49213 = DIRECTION('',(0.,-1.)); +#49214 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49215 = ORIENTED_EDGE('',*,*,#42710,.F.); +#49216 = ADVANCED_FACE('',(#49217),#42698,.F.); +#49217 = FACE_BOUND('',#49218,.F.); +#49218 = EDGE_LOOP('',(#49219,#49220,#49221,#49242)); +#49219 = ORIENTED_EDGE('',*,*,#49195,.T.); +#49220 = ORIENTED_EDGE('',*,*,#45870,.T.); +#49221 = ORIENTED_EDGE('',*,*,#49222,.F.); +#49222 = EDGE_CURVE('',#42655,#45848,#49223,.T.); +#49223 = SURFACE_CURVE('',#49224,(#49228,#49235),.PCURVE_S1.); +#49224 = LINE('',#49225,#49226); +#49225 = CARTESIAN_POINT('',(165.574328,-52.071793,0.)); +#49226 = VECTOR('',#49227,1.); +#49227 = DIRECTION('',(0.,0.,1.)); +#49228 = PCURVE('',#42698,#49229); +#49229 = DEFINITIONAL_REPRESENTATION('',(#49230),#49234); +#49230 = LINE('',#49231,#49232); +#49231 = CARTESIAN_POINT('',(0.235320111433,0.)); +#49232 = VECTOR('',#49233,1.); +#49233 = DIRECTION('',(0.,-1.)); +#49234 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49235 = PCURVE('',#42670,#49236); +#49236 = DEFINITIONAL_REPRESENTATION('',(#49237),#49241); +#49237 = LINE('',#49238,#49239); +#49238 = CARTESIAN_POINT('',(0.,0.)); +#49239 = VECTOR('',#49240,1.); +#49240 = DIRECTION('',(0.,-1.)); +#49241 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49242 = ORIENTED_EDGE('',*,*,#42682,.F.); +#49243 = ADVANCED_FACE('',(#49244),#42670,.F.); +#49244 = FACE_BOUND('',#49245,.F.); +#49245 = EDGE_LOOP('',(#49246,#49247,#49248,#49269)); +#49246 = ORIENTED_EDGE('',*,*,#49222,.T.); +#49247 = ORIENTED_EDGE('',*,*,#45847,.T.); +#49248 = ORIENTED_EDGE('',*,*,#49249,.F.); +#49249 = EDGE_CURVE('',#42627,#45825,#49250,.T.); +#49250 = SURFACE_CURVE('',#49251,(#49255,#49262),.PCURVE_S1.); +#49251 = LINE('',#49252,#49253); +#49252 = CARTESIAN_POINT('',(165.474877,-51.85852,0.)); +#49253 = VECTOR('',#49254,1.); +#49254 = DIRECTION('',(0.,0.,1.)); +#49255 = PCURVE('',#42670,#49256); +#49256 = DEFINITIONAL_REPRESENTATION('',(#49257),#49261); +#49257 = LINE('',#49258,#49259); +#49258 = CARTESIAN_POINT('',(0.235320789413,0.)); +#49259 = VECTOR('',#49260,1.); +#49260 = DIRECTION('',(0.,-1.)); +#49261 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49262 = PCURVE('',#42642,#49263); +#49263 = DEFINITIONAL_REPRESENTATION('',(#49264),#49268); +#49264 = LINE('',#49265,#49266); +#49265 = CARTESIAN_POINT('',(0.,0.)); +#49266 = VECTOR('',#49267,1.); +#49267 = DIRECTION('',(0.,-1.)); +#49268 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49269 = ORIENTED_EDGE('',*,*,#42654,.F.); +#49270 = ADVANCED_FACE('',(#49271),#42642,.F.); +#49271 = FACE_BOUND('',#49272,.F.); +#49272 = EDGE_LOOP('',(#49273,#49274,#49275,#49296)); +#49273 = ORIENTED_EDGE('',*,*,#49249,.T.); +#49274 = ORIENTED_EDGE('',*,*,#45824,.T.); +#49275 = ORIENTED_EDGE('',*,*,#49276,.F.); +#49276 = EDGE_CURVE('',#42599,#45802,#49277,.T.); +#49277 = SURFACE_CURVE('',#49278,(#49282,#49289),.PCURVE_S1.); +#49278 = LINE('',#49279,#49280); +#49279 = CARTESIAN_POINT('',(165.413972,-51.631218,0.)); +#49280 = VECTOR('',#49281,1.); +#49281 = DIRECTION('',(0.,0.,1.)); +#49282 = PCURVE('',#42642,#49283); +#49283 = DEFINITIONAL_REPRESENTATION('',(#49284),#49288); +#49284 = LINE('',#49285,#49286); +#49285 = CARTESIAN_POINT('',(0.235320246109,0.)); +#49286 = VECTOR('',#49287,1.); +#49287 = DIRECTION('',(0.,-1.)); +#49288 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49289 = PCURVE('',#42614,#49290); +#49290 = DEFINITIONAL_REPRESENTATION('',(#49291),#49295); +#49291 = LINE('',#49292,#49293); +#49292 = CARTESIAN_POINT('',(0.,0.)); +#49293 = VECTOR('',#49294,1.); +#49294 = DIRECTION('',(0.,-1.)); +#49295 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49296 = ORIENTED_EDGE('',*,*,#42626,.F.); +#49297 = ADVANCED_FACE('',(#49298),#42614,.F.); +#49298 = FACE_BOUND('',#49299,.F.); +#49299 = EDGE_LOOP('',(#49300,#49301,#49302,#49323)); +#49300 = ORIENTED_EDGE('',*,*,#49276,.T.); +#49301 = ORIENTED_EDGE('',*,*,#45801,.T.); +#49302 = ORIENTED_EDGE('',*,*,#49303,.F.); +#49303 = EDGE_CURVE('',#42571,#45779,#49304,.T.); +#49304 = SURFACE_CURVE('',#49305,(#49309,#49316),.PCURVE_S1.); +#49305 = LINE('',#49306,#49307); +#49306 = CARTESIAN_POINT('',(165.393462,-51.396793,0.)); +#49307 = VECTOR('',#49308,1.); +#49308 = DIRECTION('',(0.,0.,1.)); +#49309 = PCURVE('',#42614,#49310); +#49310 = DEFINITIONAL_REPRESENTATION('',(#49311),#49315); +#49311 = LINE('',#49312,#49313); +#49312 = CARTESIAN_POINT('',(0.235320506384,0.)); +#49313 = VECTOR('',#49314,1.); +#49314 = DIRECTION('',(0.,-1.)); +#49315 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49316 = PCURVE('',#42586,#49317); +#49317 = DEFINITIONAL_REPRESENTATION('',(#49318),#49322); +#49318 = LINE('',#49319,#49320); +#49319 = CARTESIAN_POINT('',(0.,0.)); +#49320 = VECTOR('',#49321,1.); +#49321 = DIRECTION('',(0.,-1.)); +#49322 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49323 = ORIENTED_EDGE('',*,*,#42598,.F.); +#49324 = ADVANCED_FACE('',(#49325),#42586,.F.); +#49325 = FACE_BOUND('',#49326,.F.); +#49326 = EDGE_LOOP('',(#49327,#49328,#49329,#49350)); +#49327 = ORIENTED_EDGE('',*,*,#49303,.T.); +#49328 = ORIENTED_EDGE('',*,*,#45778,.T.); +#49329 = ORIENTED_EDGE('',*,*,#49330,.F.); +#49330 = EDGE_CURVE('',#42543,#45756,#49331,.T.); +#49331 = SURFACE_CURVE('',#49332,(#49336,#49343),.PCURVE_S1.); +#49332 = LINE('',#49333,#49334); +#49333 = CARTESIAN_POINT('',(165.413972,-51.162368,0.)); +#49334 = VECTOR('',#49335,1.); +#49335 = DIRECTION('',(0.,0.,1.)); +#49336 = PCURVE('',#42586,#49337); +#49337 = DEFINITIONAL_REPRESENTATION('',(#49338),#49342); +#49338 = LINE('',#49339,#49340); +#49339 = CARTESIAN_POINT('',(0.235320506384,0.)); +#49340 = VECTOR('',#49341,1.); +#49341 = DIRECTION('',(0.,-1.)); +#49342 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49343 = PCURVE('',#42558,#49344); +#49344 = DEFINITIONAL_REPRESENTATION('',(#49345),#49349); +#49345 = LINE('',#49346,#49347); +#49346 = CARTESIAN_POINT('',(0.,0.)); +#49347 = VECTOR('',#49348,1.); +#49348 = DIRECTION('',(0.,-1.)); +#49349 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49350 = ORIENTED_EDGE('',*,*,#42570,.F.); +#49351 = ADVANCED_FACE('',(#49352),#42558,.F.); +#49352 = FACE_BOUND('',#49353,.F.); +#49353 = EDGE_LOOP('',(#49354,#49355,#49356,#49377)); +#49354 = ORIENTED_EDGE('',*,*,#49330,.T.); +#49355 = ORIENTED_EDGE('',*,*,#45755,.T.); +#49356 = ORIENTED_EDGE('',*,*,#49357,.F.); +#49357 = EDGE_CURVE('',#42515,#45733,#49358,.T.); +#49358 = SURFACE_CURVE('',#49359,(#49363,#49370),.PCURVE_S1.); +#49359 = LINE('',#49360,#49361); +#49360 = CARTESIAN_POINT('',(165.474877,-50.935066,0.)); +#49361 = VECTOR('',#49362,1.); +#49362 = DIRECTION('',(0.,0.,1.)); +#49363 = PCURVE('',#42558,#49364); +#49364 = DEFINITIONAL_REPRESENTATION('',(#49365),#49369); +#49365 = LINE('',#49366,#49367); +#49366 = CARTESIAN_POINT('',(0.235320246109,0.)); +#49367 = VECTOR('',#49368,1.); +#49368 = DIRECTION('',(0.,-1.)); +#49369 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49370 = PCURVE('',#42530,#49371); +#49371 = DEFINITIONAL_REPRESENTATION('',(#49372),#49376); +#49372 = LINE('',#49373,#49374); +#49373 = CARTESIAN_POINT('',(0.,0.)); +#49374 = VECTOR('',#49375,1.); +#49375 = DIRECTION('',(0.,-1.)); +#49376 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49377 = ORIENTED_EDGE('',*,*,#42542,.F.); +#49378 = ADVANCED_FACE('',(#49379),#42530,.F.); +#49379 = FACE_BOUND('',#49380,.F.); +#49380 = EDGE_LOOP('',(#49381,#49382,#49383,#49404)); +#49381 = ORIENTED_EDGE('',*,*,#49357,.T.); +#49382 = ORIENTED_EDGE('',*,*,#45732,.T.); +#49383 = ORIENTED_EDGE('',*,*,#49384,.F.); +#49384 = EDGE_CURVE('',#42487,#45710,#49385,.T.); +#49385 = SURFACE_CURVE('',#49386,(#49390,#49397),.PCURVE_S1.); +#49386 = LINE('',#49387,#49388); +#49387 = CARTESIAN_POINT('',(165.574328,-50.721793,0.)); +#49388 = VECTOR('',#49389,1.); +#49389 = DIRECTION('',(0.,0.,1.)); +#49390 = PCURVE('',#42530,#49391); +#49391 = DEFINITIONAL_REPRESENTATION('',(#49392),#49396); +#49392 = LINE('',#49393,#49394); +#49393 = CARTESIAN_POINT('',(0.235320789413,0.)); +#49394 = VECTOR('',#49395,1.); +#49395 = DIRECTION('',(0.,-1.)); +#49396 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49397 = PCURVE('',#42502,#49398); +#49398 = DEFINITIONAL_REPRESENTATION('',(#49399),#49403); +#49399 = LINE('',#49400,#49401); +#49400 = CARTESIAN_POINT('',(0.,0.)); +#49401 = VECTOR('',#49402,1.); +#49402 = DIRECTION('',(0.,-1.)); +#49403 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49404 = ORIENTED_EDGE('',*,*,#42514,.F.); +#49405 = ADVANCED_FACE('',(#49406),#42502,.F.); +#49406 = FACE_BOUND('',#49407,.F.); +#49407 = EDGE_LOOP('',(#49408,#49409,#49410,#49431)); +#49408 = ORIENTED_EDGE('',*,*,#49384,.T.); +#49409 = ORIENTED_EDGE('',*,*,#45709,.T.); +#49410 = ORIENTED_EDGE('',*,*,#49411,.F.); +#49411 = EDGE_CURVE('',#42459,#45687,#49412,.T.); +#49412 = SURFACE_CURVE('',#49413,(#49417,#49424),.PCURVE_S1.); +#49413 = LINE('',#49414,#49415); +#49414 = CARTESIAN_POINT('',(165.709302,-50.52903,0.)); +#49415 = VECTOR('',#49416,1.); +#49416 = DIRECTION('',(0.,0.,1.)); +#49417 = PCURVE('',#42502,#49418); +#49418 = DEFINITIONAL_REPRESENTATION('',(#49419),#49423); +#49419 = LINE('',#49420,#49421); +#49420 = CARTESIAN_POINT('',(0.235320111433,0.)); +#49421 = VECTOR('',#49422,1.); +#49422 = DIRECTION('',(0.,-1.)); +#49423 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49424 = PCURVE('',#42474,#49425); +#49425 = DEFINITIONAL_REPRESENTATION('',(#49426),#49430); +#49426 = LINE('',#49427,#49428); +#49427 = CARTESIAN_POINT('',(0.,0.)); +#49428 = VECTOR('',#49429,1.); +#49429 = DIRECTION('',(0.,-1.)); +#49430 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49431 = ORIENTED_EDGE('',*,*,#42486,.F.); +#49432 = ADVANCED_FACE('',(#49433),#42474,.F.); +#49433 = FACE_BOUND('',#49434,.F.); +#49434 = EDGE_LOOP('',(#49435,#49436,#49437,#49458)); +#49435 = ORIENTED_EDGE('',*,*,#49411,.T.); +#49436 = ORIENTED_EDGE('',*,*,#45686,.T.); +#49437 = ORIENTED_EDGE('',*,*,#49438,.F.); +#49438 = EDGE_CURVE('',#42431,#45664,#49439,.T.); +#49439 = SURFACE_CURVE('',#49440,(#49444,#49451),.PCURVE_S1.); +#49440 = LINE('',#49441,#49442); +#49441 = CARTESIAN_POINT('',(165.875699,-50.362633,0.)); +#49442 = VECTOR('',#49443,1.); +#49443 = DIRECTION('',(0.,0.,1.)); +#49444 = PCURVE('',#42474,#49445); +#49445 = DEFINITIONAL_REPRESENTATION('',(#49446),#49450); +#49446 = LINE('',#49447,#49448); +#49447 = CARTESIAN_POINT('',(0.235320894138,0.)); +#49448 = VECTOR('',#49449,1.); +#49449 = DIRECTION('',(0.,-1.)); +#49450 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49451 = PCURVE('',#42446,#49452); +#49452 = DEFINITIONAL_REPRESENTATION('',(#49453),#49457); +#49453 = LINE('',#49454,#49455); +#49454 = CARTESIAN_POINT('',(0.,0.)); +#49455 = VECTOR('',#49456,1.); +#49456 = DIRECTION('',(0.,-1.)); +#49457 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49458 = ORIENTED_EDGE('',*,*,#42458,.F.); +#49459 = ADVANCED_FACE('',(#49460),#42446,.F.); +#49460 = FACE_BOUND('',#49461,.F.); +#49461 = EDGE_LOOP('',(#49462,#49463,#49464,#49485)); +#49462 = ORIENTED_EDGE('',*,*,#49438,.T.); +#49463 = ORIENTED_EDGE('',*,*,#45663,.T.); +#49464 = ORIENTED_EDGE('',*,*,#49465,.F.); +#49465 = EDGE_CURVE('',#42403,#45641,#49466,.T.); +#49466 = SURFACE_CURVE('',#49467,(#49471,#49478),.PCURVE_S1.); +#49467 = LINE('',#49468,#49469); +#49468 = CARTESIAN_POINT('',(166.068462,-50.227659,0.)); +#49469 = VECTOR('',#49470,1.); +#49470 = DIRECTION('',(0.,0.,1.)); +#49471 = PCURVE('',#42446,#49472); +#49472 = DEFINITIONAL_REPRESENTATION('',(#49473),#49477); +#49473 = LINE('',#49474,#49475); +#49474 = CARTESIAN_POINT('',(0.235320111433,0.)); +#49475 = VECTOR('',#49476,1.); +#49476 = DIRECTION('',(0.,-1.)); +#49477 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49478 = PCURVE('',#42418,#49479); +#49479 = DEFINITIONAL_REPRESENTATION('',(#49480),#49484); +#49480 = LINE('',#49481,#49482); +#49481 = CARTESIAN_POINT('',(0.,0.)); +#49482 = VECTOR('',#49483,1.); +#49483 = DIRECTION('',(0.,-1.)); +#49484 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49485 = ORIENTED_EDGE('',*,*,#42430,.F.); +#49486 = ADVANCED_FACE('',(#49487),#42418,.F.); +#49487 = FACE_BOUND('',#49488,.F.); +#49488 = EDGE_LOOP('',(#49489,#49490,#49491,#49512)); +#49489 = ORIENTED_EDGE('',*,*,#49465,.T.); +#49490 = ORIENTED_EDGE('',*,*,#45640,.T.); +#49491 = ORIENTED_EDGE('',*,*,#49492,.F.); +#49492 = EDGE_CURVE('',#42375,#45618,#49493,.T.); +#49493 = SURFACE_CURVE('',#49494,(#49498,#49505),.PCURVE_S1.); +#49494 = LINE('',#49495,#49496); +#49495 = CARTESIAN_POINT('',(166.281735,-50.128208,0.)); +#49496 = VECTOR('',#49497,1.); +#49497 = DIRECTION('',(0.,0.,1.)); +#49498 = PCURVE('',#42418,#49499); +#49499 = DEFINITIONAL_REPRESENTATION('',(#49500),#49504); +#49500 = LINE('',#49501,#49502); +#49501 = CARTESIAN_POINT('',(0.235320789413,0.)); +#49502 = VECTOR('',#49503,1.); +#49503 = DIRECTION('',(0.,-1.)); +#49504 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49505 = PCURVE('',#42390,#49506); +#49506 = DEFINITIONAL_REPRESENTATION('',(#49507),#49511); +#49507 = LINE('',#49508,#49509); +#49508 = CARTESIAN_POINT('',(0.,0.)); +#49509 = VECTOR('',#49510,1.); +#49510 = DIRECTION('',(0.,-1.)); +#49511 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49512 = ORIENTED_EDGE('',*,*,#42402,.F.); +#49513 = ADVANCED_FACE('',(#49514),#42390,.F.); +#49514 = FACE_BOUND('',#49515,.F.); +#49515 = EDGE_LOOP('',(#49516,#49517,#49518,#49539)); +#49516 = ORIENTED_EDGE('',*,*,#49492,.T.); +#49517 = ORIENTED_EDGE('',*,*,#45617,.T.); +#49518 = ORIENTED_EDGE('',*,*,#49519,.F.); +#49519 = EDGE_CURVE('',#42347,#45595,#49520,.T.); +#49520 = SURFACE_CURVE('',#49521,(#49525,#49532),.PCURVE_S1.); +#49521 = LINE('',#49522,#49523); +#49522 = CARTESIAN_POINT('',(166.509037,-50.067303,0.)); +#49523 = VECTOR('',#49524,1.); +#49524 = DIRECTION('',(0.,0.,1.)); +#49525 = PCURVE('',#42390,#49526); +#49526 = DEFINITIONAL_REPRESENTATION('',(#49527),#49531); +#49527 = LINE('',#49528,#49529); +#49528 = CARTESIAN_POINT('',(0.235320246109,0.)); +#49529 = VECTOR('',#49530,1.); +#49530 = DIRECTION('',(0.,-1.)); +#49531 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49532 = PCURVE('',#42362,#49533); +#49533 = DEFINITIONAL_REPRESENTATION('',(#49534),#49538); +#49534 = LINE('',#49535,#49536); +#49535 = CARTESIAN_POINT('',(0.,0.)); +#49536 = VECTOR('',#49537,1.); +#49537 = DIRECTION('',(0.,-1.)); +#49538 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49539 = ORIENTED_EDGE('',*,*,#42374,.F.); +#49540 = ADVANCED_FACE('',(#49541),#42362,.F.); +#49541 = FACE_BOUND('',#49542,.F.); +#49542 = EDGE_LOOP('',(#49543,#49544,#49545,#49566)); +#49543 = ORIENTED_EDGE('',*,*,#49519,.T.); +#49544 = ORIENTED_EDGE('',*,*,#45594,.T.); +#49545 = ORIENTED_EDGE('',*,*,#49546,.F.); +#49546 = EDGE_CURVE('',#42319,#45572,#49547,.T.); +#49547 = SURFACE_CURVE('',#49548,(#49552,#49559),.PCURVE_S1.); +#49548 = LINE('',#49549,#49550); +#49549 = CARTESIAN_POINT('',(166.743462,-50.046793,0.)); +#49550 = VECTOR('',#49551,1.); +#49551 = DIRECTION('',(0.,0.,1.)); +#49552 = PCURVE('',#42362,#49553); +#49553 = DEFINITIONAL_REPRESENTATION('',(#49554),#49558); +#49554 = LINE('',#49555,#49556); +#49555 = CARTESIAN_POINT('',(0.235320506384,0.)); +#49556 = VECTOR('',#49557,1.); +#49557 = DIRECTION('',(0.,-1.)); +#49558 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49559 = PCURVE('',#42334,#49560); +#49560 = DEFINITIONAL_REPRESENTATION('',(#49561),#49565); +#49561 = LINE('',#49562,#49563); +#49562 = CARTESIAN_POINT('',(0.,0.)); +#49563 = VECTOR('',#49564,1.); +#49564 = DIRECTION('',(0.,-1.)); +#49565 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49566 = ORIENTED_EDGE('',*,*,#42346,.F.); +#49567 = ADVANCED_FACE('',(#49568),#42334,.F.); +#49568 = FACE_BOUND('',#49569,.F.); +#49569 = EDGE_LOOP('',(#49570,#49571,#49572,#49593)); +#49570 = ORIENTED_EDGE('',*,*,#49546,.T.); +#49571 = ORIENTED_EDGE('',*,*,#45571,.T.); +#49572 = ORIENTED_EDGE('',*,*,#49573,.F.); +#49573 = EDGE_CURVE('',#42291,#45549,#49574,.T.); +#49574 = SURFACE_CURVE('',#49575,(#49579,#49586),.PCURVE_S1.); +#49575 = LINE('',#49576,#49577); +#49576 = CARTESIAN_POINT('',(167.543462,-50.046793,0.)); +#49577 = VECTOR('',#49578,1.); +#49578 = DIRECTION('',(0.,0.,1.)); +#49579 = PCURVE('',#42334,#49580); +#49580 = DEFINITIONAL_REPRESENTATION('',(#49581),#49585); +#49581 = LINE('',#49582,#49583); +#49582 = CARTESIAN_POINT('',(0.8,0.)); +#49583 = VECTOR('',#49584,1.); +#49584 = DIRECTION('',(0.,-1.)); +#49585 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49586 = PCURVE('',#42306,#49587); +#49587 = DEFINITIONAL_REPRESENTATION('',(#49588),#49592); +#49588 = LINE('',#49589,#49590); +#49589 = CARTESIAN_POINT('',(0.,0.)); +#49590 = VECTOR('',#49591,1.); +#49591 = DIRECTION('',(0.,-1.)); +#49592 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49593 = ORIENTED_EDGE('',*,*,#42318,.F.); +#49594 = ADVANCED_FACE('',(#49595),#42306,.F.); +#49595 = FACE_BOUND('',#49596,.F.); +#49596 = EDGE_LOOP('',(#49597,#49598,#49599,#49600)); +#49597 = ORIENTED_EDGE('',*,*,#49573,.T.); +#49598 = ORIENTED_EDGE('',*,*,#45548,.T.); +#49599 = ORIENTED_EDGE('',*,*,#48579,.F.); +#49600 = ORIENTED_EDGE('',*,*,#42290,.F.); +#49601 = ADVANCED_FACE('',(#49602),#43344,.F.); +#49602 = FACE_BOUND('',#49603,.F.); +#49603 = EDGE_LOOP('',(#49604,#49625,#49626,#49647)); +#49604 = ORIENTED_EDGE('',*,*,#49605,.T.); +#49605 = EDGE_CURVE('',#43327,#46400,#49606,.T.); +#49606 = SURFACE_CURVE('',#49607,(#49611,#49618),.PCURVE_S1.); +#49607 = LINE('',#49608,#49609); +#49608 = CARTESIAN_POINT('',(138.777887,-50.067303,0.)); +#49609 = VECTOR('',#49610,1.); +#49610 = DIRECTION('',(0.,0.,1.)); +#49611 = PCURVE('',#43344,#49612); +#49612 = DEFINITIONAL_REPRESENTATION('',(#49613),#49617); +#49613 = LINE('',#49614,#49615); +#49614 = CARTESIAN_POINT('',(0.,0.)); +#49615 = VECTOR('',#49616,1.); +#49616 = DIRECTION('',(0.,-1.)); +#49617 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49618 = PCURVE('',#43372,#49619); +#49619 = DEFINITIONAL_REPRESENTATION('',(#49620),#49624); +#49620 = LINE('',#49621,#49622); +#49621 = CARTESIAN_POINT('',(0.235320506384,0.)); +#49622 = VECTOR('',#49623,1.); +#49623 = DIRECTION('',(0.,-1.)); +#49624 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49625 = ORIENTED_EDGE('',*,*,#46399,.T.); +#49626 = ORIENTED_EDGE('',*,*,#49627,.F.); +#49627 = EDGE_CURVE('',#43329,#46402,#49628,.T.); +#49628 = SURFACE_CURVE('',#49629,(#49633,#49640),.PCURVE_S1.); +#49629 = LINE('',#49630,#49631); +#49630 = CARTESIAN_POINT('',(139.005189,-50.128208,0.)); +#49631 = VECTOR('',#49632,1.); +#49632 = DIRECTION('',(0.,0.,1.)); +#49633 = PCURVE('',#43344,#49634); +#49634 = DEFINITIONAL_REPRESENTATION('',(#49635),#49639); +#49635 = LINE('',#49636,#49637); +#49636 = CARTESIAN_POINT('',(0.235320246109,0.)); +#49637 = VECTOR('',#49638,1.); +#49638 = DIRECTION('',(0.,-1.)); +#49639 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49640 = PCURVE('',#44378,#49641); +#49641 = DEFINITIONAL_REPRESENTATION('',(#49642),#49646); +#49642 = LINE('',#49643,#49644); +#49643 = CARTESIAN_POINT('',(0.,0.)); +#49644 = VECTOR('',#49645,1.); +#49645 = DIRECTION('',(0.,-1.)); +#49646 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49647 = ORIENTED_EDGE('',*,*,#43326,.F.); +#49648 = ADVANCED_FACE('',(#49649),#44378,.F.); +#49649 = FACE_BOUND('',#49650,.F.); +#49650 = EDGE_LOOP('',(#49651,#49652,#49653,#49674)); +#49651 = ORIENTED_EDGE('',*,*,#49627,.T.); +#49652 = ORIENTED_EDGE('',*,*,#47252,.T.); +#49653 = ORIENTED_EDGE('',*,*,#49654,.F.); +#49654 = EDGE_CURVE('',#44337,#47230,#49655,.T.); +#49655 = SURFACE_CURVE('',#49656,(#49660,#49667),.PCURVE_S1.); +#49656 = LINE('',#49657,#49658); +#49657 = CARTESIAN_POINT('',(139.218462,-50.227659,0.)); +#49658 = VECTOR('',#49659,1.); +#49659 = DIRECTION('',(0.,0.,1.)); +#49660 = PCURVE('',#44378,#49661); +#49661 = DEFINITIONAL_REPRESENTATION('',(#49662),#49666); +#49662 = LINE('',#49663,#49664); +#49663 = CARTESIAN_POINT('',(0.235320789413,0.)); +#49664 = VECTOR('',#49665,1.); +#49665 = DIRECTION('',(0.,-1.)); +#49666 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49667 = PCURVE('',#44352,#49668); +#49668 = DEFINITIONAL_REPRESENTATION('',(#49669),#49673); +#49669 = LINE('',#49670,#49671); +#49670 = CARTESIAN_POINT('',(0.,0.)); +#49671 = VECTOR('',#49672,1.); +#49672 = DIRECTION('',(0.,-1.)); +#49673 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49674 = ORIENTED_EDGE('',*,*,#44364,.F.); +#49675 = ADVANCED_FACE('',(#49676),#44352,.F.); +#49676 = FACE_BOUND('',#49677,.F.); +#49677 = EDGE_LOOP('',(#49678,#49679,#49680,#49701)); +#49678 = ORIENTED_EDGE('',*,*,#49654,.T.); +#49679 = ORIENTED_EDGE('',*,*,#47229,.T.); +#49680 = ORIENTED_EDGE('',*,*,#49681,.F.); +#49681 = EDGE_CURVE('',#44309,#47207,#49682,.T.); +#49682 = SURFACE_CURVE('',#49683,(#49687,#49694),.PCURVE_S1.); +#49683 = LINE('',#49684,#49685); +#49684 = CARTESIAN_POINT('',(139.411225,-50.362633,0.)); +#49685 = VECTOR('',#49686,1.); +#49686 = DIRECTION('',(0.,0.,1.)); +#49687 = PCURVE('',#44352,#49688); +#49688 = DEFINITIONAL_REPRESENTATION('',(#49689),#49693); +#49689 = LINE('',#49690,#49691); +#49690 = CARTESIAN_POINT('',(0.235320111433,0.)); +#49691 = VECTOR('',#49692,1.); +#49692 = DIRECTION('',(0.,-1.)); +#49693 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49694 = PCURVE('',#44324,#49695); +#49695 = DEFINITIONAL_REPRESENTATION('',(#49696),#49700); +#49696 = LINE('',#49697,#49698); +#49697 = CARTESIAN_POINT('',(0.,0.)); +#49698 = VECTOR('',#49699,1.); +#49699 = DIRECTION('',(0.,-1.)); +#49700 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49701 = ORIENTED_EDGE('',*,*,#44336,.F.); +#49702 = ADVANCED_FACE('',(#49703),#44324,.F.); +#49703 = FACE_BOUND('',#49704,.F.); +#49704 = EDGE_LOOP('',(#49705,#49706,#49707,#49728)); +#49705 = ORIENTED_EDGE('',*,*,#49681,.T.); +#49706 = ORIENTED_EDGE('',*,*,#47206,.T.); +#49707 = ORIENTED_EDGE('',*,*,#49708,.F.); +#49708 = EDGE_CURVE('',#44281,#47184,#49709,.T.); +#49709 = SURFACE_CURVE('',#49710,(#49714,#49721),.PCURVE_S1.); +#49710 = LINE('',#49711,#49712); +#49711 = CARTESIAN_POINT('',(139.577622,-50.52903,0.)); +#49712 = VECTOR('',#49713,1.); +#49713 = DIRECTION('',(0.,0.,1.)); +#49714 = PCURVE('',#44324,#49715); +#49715 = DEFINITIONAL_REPRESENTATION('',(#49716),#49720); +#49716 = LINE('',#49717,#49718); +#49717 = CARTESIAN_POINT('',(0.235320894138,0.)); +#49718 = VECTOR('',#49719,1.); +#49719 = DIRECTION('',(0.,-1.)); +#49720 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49721 = PCURVE('',#44296,#49722); +#49722 = DEFINITIONAL_REPRESENTATION('',(#49723),#49727); +#49723 = LINE('',#49724,#49725); +#49724 = CARTESIAN_POINT('',(0.,0.)); +#49725 = VECTOR('',#49726,1.); +#49726 = DIRECTION('',(0.,-1.)); +#49727 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49728 = ORIENTED_EDGE('',*,*,#44308,.F.); +#49729 = ADVANCED_FACE('',(#49730),#44296,.F.); +#49730 = FACE_BOUND('',#49731,.F.); +#49731 = EDGE_LOOP('',(#49732,#49733,#49734,#49755)); +#49732 = ORIENTED_EDGE('',*,*,#49708,.T.); +#49733 = ORIENTED_EDGE('',*,*,#47183,.T.); +#49734 = ORIENTED_EDGE('',*,*,#49735,.F.); +#49735 = EDGE_CURVE('',#44253,#47161,#49736,.T.); +#49736 = SURFACE_CURVE('',#49737,(#49741,#49748),.PCURVE_S1.); +#49737 = LINE('',#49738,#49739); +#49738 = CARTESIAN_POINT('',(139.712596,-50.721793,0.)); +#49739 = VECTOR('',#49740,1.); +#49740 = DIRECTION('',(0.,0.,1.)); +#49741 = PCURVE('',#44296,#49742); +#49742 = DEFINITIONAL_REPRESENTATION('',(#49743),#49747); +#49743 = LINE('',#49744,#49745); +#49744 = CARTESIAN_POINT('',(0.235320111433,0.)); +#49745 = VECTOR('',#49746,1.); +#49746 = DIRECTION('',(0.,-1.)); +#49747 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49748 = PCURVE('',#44268,#49749); +#49749 = DEFINITIONAL_REPRESENTATION('',(#49750),#49754); +#49750 = LINE('',#49751,#49752); +#49751 = CARTESIAN_POINT('',(0.,0.)); +#49752 = VECTOR('',#49753,1.); +#49753 = DIRECTION('',(0.,-1.)); +#49754 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49755 = ORIENTED_EDGE('',*,*,#44280,.F.); +#49756 = ADVANCED_FACE('',(#49757),#44268,.F.); +#49757 = FACE_BOUND('',#49758,.F.); +#49758 = EDGE_LOOP('',(#49759,#49760,#49761,#49782)); +#49759 = ORIENTED_EDGE('',*,*,#49735,.T.); +#49760 = ORIENTED_EDGE('',*,*,#47160,.T.); +#49761 = ORIENTED_EDGE('',*,*,#49762,.F.); +#49762 = EDGE_CURVE('',#44225,#47138,#49763,.T.); +#49763 = SURFACE_CURVE('',#49764,(#49768,#49775),.PCURVE_S1.); +#49764 = LINE('',#49765,#49766); +#49765 = CARTESIAN_POINT('',(139.812047,-50.935066,0.)); +#49766 = VECTOR('',#49767,1.); +#49767 = DIRECTION('',(0.,0.,1.)); +#49768 = PCURVE('',#44268,#49769); +#49769 = DEFINITIONAL_REPRESENTATION('',(#49770),#49774); +#49770 = LINE('',#49771,#49772); +#49771 = CARTESIAN_POINT('',(0.235320789413,0.)); +#49772 = VECTOR('',#49773,1.); +#49773 = DIRECTION('',(0.,-1.)); +#49774 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49775 = PCURVE('',#44240,#49776); +#49776 = DEFINITIONAL_REPRESENTATION('',(#49777),#49781); +#49777 = LINE('',#49778,#49779); +#49778 = CARTESIAN_POINT('',(0.,0.)); +#49779 = VECTOR('',#49780,1.); +#49780 = DIRECTION('',(0.,-1.)); +#49781 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49782 = ORIENTED_EDGE('',*,*,#44252,.F.); +#49783 = ADVANCED_FACE('',(#49784),#44240,.F.); +#49784 = FACE_BOUND('',#49785,.F.); +#49785 = EDGE_LOOP('',(#49786,#49787,#49788,#49809)); +#49786 = ORIENTED_EDGE('',*,*,#49762,.T.); +#49787 = ORIENTED_EDGE('',*,*,#47137,.T.); +#49788 = ORIENTED_EDGE('',*,*,#49789,.F.); +#49789 = EDGE_CURVE('',#44197,#47115,#49790,.T.); +#49790 = SURFACE_CURVE('',#49791,(#49795,#49802),.PCURVE_S1.); +#49791 = LINE('',#49792,#49793); +#49792 = CARTESIAN_POINT('',(139.872952,-51.162368,0.)); +#49793 = VECTOR('',#49794,1.); +#49794 = DIRECTION('',(0.,0.,1.)); +#49795 = PCURVE('',#44240,#49796); +#49796 = DEFINITIONAL_REPRESENTATION('',(#49797),#49801); +#49797 = LINE('',#49798,#49799); +#49798 = CARTESIAN_POINT('',(0.235320246109,0.)); +#49799 = VECTOR('',#49800,1.); +#49800 = DIRECTION('',(0.,-1.)); +#49801 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49802 = PCURVE('',#44212,#49803); +#49803 = DEFINITIONAL_REPRESENTATION('',(#49804),#49808); +#49804 = LINE('',#49805,#49806); +#49805 = CARTESIAN_POINT('',(0.,0.)); +#49806 = VECTOR('',#49807,1.); +#49807 = DIRECTION('',(0.,-1.)); +#49808 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49809 = ORIENTED_EDGE('',*,*,#44224,.F.); +#49810 = ADVANCED_FACE('',(#49811),#44212,.F.); +#49811 = FACE_BOUND('',#49812,.F.); +#49812 = EDGE_LOOP('',(#49813,#49814,#49815,#49836)); +#49813 = ORIENTED_EDGE('',*,*,#49789,.T.); +#49814 = ORIENTED_EDGE('',*,*,#47114,.T.); +#49815 = ORIENTED_EDGE('',*,*,#49816,.F.); +#49816 = EDGE_CURVE('',#44169,#47092,#49817,.T.); +#49817 = SURFACE_CURVE('',#49818,(#49822,#49829),.PCURVE_S1.); +#49818 = LINE('',#49819,#49820); +#49819 = CARTESIAN_POINT('',(139.893462,-51.396793,0.)); +#49820 = VECTOR('',#49821,1.); +#49821 = DIRECTION('',(0.,0.,1.)); +#49822 = PCURVE('',#44212,#49823); +#49823 = DEFINITIONAL_REPRESENTATION('',(#49824),#49828); +#49824 = LINE('',#49825,#49826); +#49825 = CARTESIAN_POINT('',(0.235320506384,0.)); +#49826 = VECTOR('',#49827,1.); +#49827 = DIRECTION('',(0.,-1.)); +#49828 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49829 = PCURVE('',#44184,#49830); +#49830 = DEFINITIONAL_REPRESENTATION('',(#49831),#49835); +#49831 = LINE('',#49832,#49833); +#49832 = CARTESIAN_POINT('',(0.,0.)); +#49833 = VECTOR('',#49834,1.); +#49834 = DIRECTION('',(0.,-1.)); +#49835 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49836 = ORIENTED_EDGE('',*,*,#44196,.F.); +#49837 = ADVANCED_FACE('',(#49838),#44184,.F.); +#49838 = FACE_BOUND('',#49839,.F.); +#49839 = EDGE_LOOP('',(#49840,#49841,#49842,#49863)); +#49840 = ORIENTED_EDGE('',*,*,#49816,.T.); +#49841 = ORIENTED_EDGE('',*,*,#47091,.T.); +#49842 = ORIENTED_EDGE('',*,*,#49843,.F.); +#49843 = EDGE_CURVE('',#44141,#47069,#49844,.T.); +#49844 = SURFACE_CURVE('',#49845,(#49849,#49856),.PCURVE_S1.); +#49845 = LINE('',#49846,#49847); +#49846 = CARTESIAN_POINT('',(139.872952,-51.631218,0.)); +#49847 = VECTOR('',#49848,1.); +#49848 = DIRECTION('',(0.,0.,1.)); +#49849 = PCURVE('',#44184,#49850); +#49850 = DEFINITIONAL_REPRESENTATION('',(#49851),#49855); +#49851 = LINE('',#49852,#49853); +#49852 = CARTESIAN_POINT('',(0.235320506384,0.)); +#49853 = VECTOR('',#49854,1.); +#49854 = DIRECTION('',(0.,-1.)); +#49855 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49856 = PCURVE('',#44156,#49857); +#49857 = DEFINITIONAL_REPRESENTATION('',(#49858),#49862); +#49858 = LINE('',#49859,#49860); +#49859 = CARTESIAN_POINT('',(0.,0.)); +#49860 = VECTOR('',#49861,1.); +#49861 = DIRECTION('',(0.,-1.)); +#49862 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49863 = ORIENTED_EDGE('',*,*,#44168,.F.); +#49864 = ADVANCED_FACE('',(#49865),#44156,.F.); +#49865 = FACE_BOUND('',#49866,.F.); +#49866 = EDGE_LOOP('',(#49867,#49868,#49869,#49890)); +#49867 = ORIENTED_EDGE('',*,*,#49843,.T.); +#49868 = ORIENTED_EDGE('',*,*,#47068,.T.); +#49869 = ORIENTED_EDGE('',*,*,#49870,.F.); +#49870 = EDGE_CURVE('',#44113,#47046,#49871,.T.); +#49871 = SURFACE_CURVE('',#49872,(#49876,#49883),.PCURVE_S1.); +#49872 = LINE('',#49873,#49874); +#49873 = CARTESIAN_POINT('',(139.812047,-51.85852,0.)); +#49874 = VECTOR('',#49875,1.); +#49875 = DIRECTION('',(0.,0.,1.)); +#49876 = PCURVE('',#44156,#49877); +#49877 = DEFINITIONAL_REPRESENTATION('',(#49878),#49882); +#49878 = LINE('',#49879,#49880); +#49879 = CARTESIAN_POINT('',(0.235320246109,0.)); +#49880 = VECTOR('',#49881,1.); +#49881 = DIRECTION('',(0.,-1.)); +#49882 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49883 = PCURVE('',#44128,#49884); +#49884 = DEFINITIONAL_REPRESENTATION('',(#49885),#49889); +#49885 = LINE('',#49886,#49887); +#49886 = CARTESIAN_POINT('',(0.,0.)); +#49887 = VECTOR('',#49888,1.); +#49888 = DIRECTION('',(0.,-1.)); +#49889 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49890 = ORIENTED_EDGE('',*,*,#44140,.F.); +#49891 = ADVANCED_FACE('',(#49892),#44128,.F.); +#49892 = FACE_BOUND('',#49893,.F.); +#49893 = EDGE_LOOP('',(#49894,#49895,#49896,#49917)); +#49894 = ORIENTED_EDGE('',*,*,#49870,.T.); +#49895 = ORIENTED_EDGE('',*,*,#47045,.T.); +#49896 = ORIENTED_EDGE('',*,*,#49897,.F.); +#49897 = EDGE_CURVE('',#44085,#47023,#49898,.T.); +#49898 = SURFACE_CURVE('',#49899,(#49903,#49910),.PCURVE_S1.); +#49899 = LINE('',#49900,#49901); +#49900 = CARTESIAN_POINT('',(139.712596,-52.071793,0.)); +#49901 = VECTOR('',#49902,1.); +#49902 = DIRECTION('',(0.,0.,1.)); +#49903 = PCURVE('',#44128,#49904); +#49904 = DEFINITIONAL_REPRESENTATION('',(#49905),#49909); +#49905 = LINE('',#49906,#49907); +#49906 = CARTESIAN_POINT('',(0.235320789413,0.)); +#49907 = VECTOR('',#49908,1.); +#49908 = DIRECTION('',(0.,-1.)); +#49909 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49910 = PCURVE('',#44100,#49911); +#49911 = DEFINITIONAL_REPRESENTATION('',(#49912),#49916); +#49912 = LINE('',#49913,#49914); +#49913 = CARTESIAN_POINT('',(0.,0.)); +#49914 = VECTOR('',#49915,1.); +#49915 = DIRECTION('',(0.,-1.)); +#49916 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49917 = ORIENTED_EDGE('',*,*,#44112,.F.); +#49918 = ADVANCED_FACE('',(#49919),#44100,.F.); +#49919 = FACE_BOUND('',#49920,.F.); +#49920 = EDGE_LOOP('',(#49921,#49922,#49923,#49944)); +#49921 = ORIENTED_EDGE('',*,*,#49897,.T.); +#49922 = ORIENTED_EDGE('',*,*,#47022,.T.); +#49923 = ORIENTED_EDGE('',*,*,#49924,.F.); +#49924 = EDGE_CURVE('',#44057,#47000,#49925,.T.); +#49925 = SURFACE_CURVE('',#49926,(#49930,#49937),.PCURVE_S1.); +#49926 = LINE('',#49927,#49928); +#49927 = CARTESIAN_POINT('',(139.577622,-52.264556,0.)); +#49928 = VECTOR('',#49929,1.); +#49929 = DIRECTION('',(0.,0.,1.)); +#49930 = PCURVE('',#44100,#49931); +#49931 = DEFINITIONAL_REPRESENTATION('',(#49932),#49936); +#49932 = LINE('',#49933,#49934); +#49933 = CARTESIAN_POINT('',(0.235320111433,0.)); +#49934 = VECTOR('',#49935,1.); +#49935 = DIRECTION('',(0.,-1.)); +#49936 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49937 = PCURVE('',#44072,#49938); +#49938 = DEFINITIONAL_REPRESENTATION('',(#49939),#49943); +#49939 = LINE('',#49940,#49941); +#49940 = CARTESIAN_POINT('',(0.,0.)); +#49941 = VECTOR('',#49942,1.); +#49942 = DIRECTION('',(0.,-1.)); +#49943 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49944 = ORIENTED_EDGE('',*,*,#44084,.F.); +#49945 = ADVANCED_FACE('',(#49946),#44072,.F.); +#49946 = FACE_BOUND('',#49947,.F.); +#49947 = EDGE_LOOP('',(#49948,#49949,#49950,#49971)); +#49948 = ORIENTED_EDGE('',*,*,#49924,.T.); +#49949 = ORIENTED_EDGE('',*,*,#46999,.T.); +#49950 = ORIENTED_EDGE('',*,*,#49951,.F.); +#49951 = EDGE_CURVE('',#44029,#46977,#49952,.T.); +#49952 = SURFACE_CURVE('',#49953,(#49957,#49964),.PCURVE_S1.); +#49953 = LINE('',#49954,#49955); +#49954 = CARTESIAN_POINT('',(139.411225,-52.430953,0.)); +#49955 = VECTOR('',#49956,1.); +#49956 = DIRECTION('',(0.,0.,1.)); +#49957 = PCURVE('',#44072,#49958); +#49958 = DEFINITIONAL_REPRESENTATION('',(#49959),#49963); +#49959 = LINE('',#49960,#49961); +#49960 = CARTESIAN_POINT('',(0.235320894138,0.)); +#49961 = VECTOR('',#49962,1.); +#49962 = DIRECTION('',(0.,-1.)); +#49963 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49964 = PCURVE('',#44044,#49965); +#49965 = DEFINITIONAL_REPRESENTATION('',(#49966),#49970); +#49966 = LINE('',#49967,#49968); +#49967 = CARTESIAN_POINT('',(0.,0.)); +#49968 = VECTOR('',#49969,1.); +#49969 = DIRECTION('',(0.,-1.)); +#49970 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49971 = ORIENTED_EDGE('',*,*,#44056,.F.); +#49972 = ADVANCED_FACE('',(#49973),#44044,.F.); +#49973 = FACE_BOUND('',#49974,.F.); +#49974 = EDGE_LOOP('',(#49975,#49976,#49977,#49998)); +#49975 = ORIENTED_EDGE('',*,*,#49951,.T.); +#49976 = ORIENTED_EDGE('',*,*,#46976,.T.); +#49977 = ORIENTED_EDGE('',*,*,#49978,.F.); +#49978 = EDGE_CURVE('',#44001,#46954,#49979,.T.); +#49979 = SURFACE_CURVE('',#49980,(#49984,#49991),.PCURVE_S1.); +#49980 = LINE('',#49981,#49982); +#49981 = CARTESIAN_POINT('',(139.218462,-52.565927,0.)); +#49982 = VECTOR('',#49983,1.); +#49983 = DIRECTION('',(0.,0.,1.)); +#49984 = PCURVE('',#44044,#49985); +#49985 = DEFINITIONAL_REPRESENTATION('',(#49986),#49990); +#49986 = LINE('',#49987,#49988); +#49987 = CARTESIAN_POINT('',(0.235320111433,0.)); +#49988 = VECTOR('',#49989,1.); +#49989 = DIRECTION('',(0.,-1.)); +#49990 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49991 = PCURVE('',#44016,#49992); +#49992 = DEFINITIONAL_REPRESENTATION('',(#49993),#49997); +#49993 = LINE('',#49994,#49995); +#49994 = CARTESIAN_POINT('',(0.,0.)); +#49995 = VECTOR('',#49996,1.); +#49996 = DIRECTION('',(0.,-1.)); +#49997 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#49998 = ORIENTED_EDGE('',*,*,#44028,.F.); +#49999 = ADVANCED_FACE('',(#50000),#44016,.F.); +#50000 = FACE_BOUND('',#50001,.F.); +#50001 = EDGE_LOOP('',(#50002,#50003,#50004,#50025)); +#50002 = ORIENTED_EDGE('',*,*,#49978,.T.); +#50003 = ORIENTED_EDGE('',*,*,#46953,.T.); +#50004 = ORIENTED_EDGE('',*,*,#50005,.F.); +#50005 = EDGE_CURVE('',#43973,#46931,#50006,.T.); +#50006 = SURFACE_CURVE('',#50007,(#50011,#50018),.PCURVE_S1.); +#50007 = LINE('',#50008,#50009); +#50008 = CARTESIAN_POINT('',(139.005189,-52.665378,0.)); +#50009 = VECTOR('',#50010,1.); +#50010 = DIRECTION('',(0.,0.,1.)); +#50011 = PCURVE('',#44016,#50012); +#50012 = DEFINITIONAL_REPRESENTATION('',(#50013),#50017); +#50013 = LINE('',#50014,#50015); +#50014 = CARTESIAN_POINT('',(0.235320789413,0.)); +#50015 = VECTOR('',#50016,1.); +#50016 = DIRECTION('',(0.,-1.)); +#50017 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50018 = PCURVE('',#43988,#50019); +#50019 = DEFINITIONAL_REPRESENTATION('',(#50020),#50024); +#50020 = LINE('',#50021,#50022); +#50021 = CARTESIAN_POINT('',(0.,0.)); +#50022 = VECTOR('',#50023,1.); +#50023 = DIRECTION('',(0.,-1.)); +#50024 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50025 = ORIENTED_EDGE('',*,*,#44000,.F.); +#50026 = ADVANCED_FACE('',(#50027),#43988,.F.); +#50027 = FACE_BOUND('',#50028,.F.); +#50028 = EDGE_LOOP('',(#50029,#50030,#50031,#50052)); +#50029 = ORIENTED_EDGE('',*,*,#50005,.T.); +#50030 = ORIENTED_EDGE('',*,*,#46930,.T.); +#50031 = ORIENTED_EDGE('',*,*,#50032,.F.); +#50032 = EDGE_CURVE('',#43945,#46908,#50033,.T.); +#50033 = SURFACE_CURVE('',#50034,(#50038,#50045),.PCURVE_S1.); +#50034 = LINE('',#50035,#50036); +#50035 = CARTESIAN_POINT('',(138.777887,-52.726283,0.)); +#50036 = VECTOR('',#50037,1.); +#50037 = DIRECTION('',(0.,0.,1.)); +#50038 = PCURVE('',#43988,#50039); +#50039 = DEFINITIONAL_REPRESENTATION('',(#50040),#50044); +#50040 = LINE('',#50041,#50042); +#50041 = CARTESIAN_POINT('',(0.235320246109,0.)); +#50042 = VECTOR('',#50043,1.); +#50043 = DIRECTION('',(0.,-1.)); +#50044 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50045 = PCURVE('',#43960,#50046); +#50046 = DEFINITIONAL_REPRESENTATION('',(#50047),#50051); +#50047 = LINE('',#50048,#50049); +#50048 = CARTESIAN_POINT('',(0.,0.)); +#50049 = VECTOR('',#50050,1.); +#50050 = DIRECTION('',(0.,-1.)); +#50051 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50052 = ORIENTED_EDGE('',*,*,#43972,.F.); +#50053 = ADVANCED_FACE('',(#50054),#43960,.F.); +#50054 = FACE_BOUND('',#50055,.F.); +#50055 = EDGE_LOOP('',(#50056,#50057,#50058,#50079)); +#50056 = ORIENTED_EDGE('',*,*,#50032,.T.); +#50057 = ORIENTED_EDGE('',*,*,#46907,.T.); +#50058 = ORIENTED_EDGE('',*,*,#50059,.F.); +#50059 = EDGE_CURVE('',#43917,#46885,#50060,.T.); +#50060 = SURFACE_CURVE('',#50061,(#50065,#50072),.PCURVE_S1.); +#50061 = LINE('',#50062,#50063); +#50062 = CARTESIAN_POINT('',(138.543462,-52.746793,0.)); +#50063 = VECTOR('',#50064,1.); +#50064 = DIRECTION('',(0.,0.,1.)); +#50065 = PCURVE('',#43960,#50066); +#50066 = DEFINITIONAL_REPRESENTATION('',(#50067),#50071); +#50067 = LINE('',#50068,#50069); +#50068 = CARTESIAN_POINT('',(0.235320506384,0.)); +#50069 = VECTOR('',#50070,1.); +#50070 = DIRECTION('',(0.,-1.)); +#50071 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50072 = PCURVE('',#43932,#50073); +#50073 = DEFINITIONAL_REPRESENTATION('',(#50074),#50078); +#50074 = LINE('',#50075,#50076); +#50075 = CARTESIAN_POINT('',(0.,-0.)); +#50076 = VECTOR('',#50077,1.); +#50077 = DIRECTION('',(0.,-1.)); +#50078 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50079 = ORIENTED_EDGE('',*,*,#43944,.F.); +#50080 = ADVANCED_FACE('',(#50081),#43932,.F.); +#50081 = FACE_BOUND('',#50082,.F.); +#50082 = EDGE_LOOP('',(#50083,#50084,#50085,#50106)); +#50083 = ORIENTED_EDGE('',*,*,#50059,.T.); +#50084 = ORIENTED_EDGE('',*,*,#46884,.T.); +#50085 = ORIENTED_EDGE('',*,*,#50086,.F.); +#50086 = EDGE_CURVE('',#43889,#46862,#50087,.T.); +#50087 = SURFACE_CURVE('',#50088,(#50092,#50099),.PCURVE_S1.); +#50088 = LINE('',#50089,#50090); +#50089 = CARTESIAN_POINT('',(137.743462,-52.746793,0.)); +#50090 = VECTOR('',#50091,1.); +#50091 = DIRECTION('',(0.,0.,1.)); +#50092 = PCURVE('',#43932,#50093); +#50093 = DEFINITIONAL_REPRESENTATION('',(#50094),#50098); +#50094 = LINE('',#50095,#50096); +#50095 = CARTESIAN_POINT('',(0.8,0.)); +#50096 = VECTOR('',#50097,1.); +#50097 = DIRECTION('',(0.,-1.)); +#50098 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50099 = PCURVE('',#43904,#50100); +#50100 = DEFINITIONAL_REPRESENTATION('',(#50101),#50105); +#50101 = LINE('',#50102,#50103); +#50102 = CARTESIAN_POINT('',(0.,0.)); +#50103 = VECTOR('',#50104,1.); +#50104 = DIRECTION('',(0.,-1.)); +#50105 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50106 = ORIENTED_EDGE('',*,*,#43916,.F.); +#50107 = ADVANCED_FACE('',(#50108),#43904,.F.); +#50108 = FACE_BOUND('',#50109,.F.); +#50109 = EDGE_LOOP('',(#50110,#50111,#50112,#50133)); +#50110 = ORIENTED_EDGE('',*,*,#50086,.T.); +#50111 = ORIENTED_EDGE('',*,*,#46861,.T.); +#50112 = ORIENTED_EDGE('',*,*,#50113,.F.); +#50113 = EDGE_CURVE('',#43861,#46839,#50114,.T.); +#50114 = SURFACE_CURVE('',#50115,(#50119,#50126),.PCURVE_S1.); +#50115 = LINE('',#50116,#50117); +#50116 = CARTESIAN_POINT('',(137.509037,-52.726283,0.)); +#50117 = VECTOR('',#50118,1.); +#50118 = DIRECTION('',(0.,0.,1.)); +#50119 = PCURVE('',#43904,#50120); +#50120 = DEFINITIONAL_REPRESENTATION('',(#50121),#50125); +#50121 = LINE('',#50122,#50123); +#50122 = CARTESIAN_POINT('',(0.235320506384,0.)); +#50123 = VECTOR('',#50124,1.); +#50124 = DIRECTION('',(0.,-1.)); +#50125 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50126 = PCURVE('',#43876,#50127); +#50127 = DEFINITIONAL_REPRESENTATION('',(#50128),#50132); +#50128 = LINE('',#50129,#50130); +#50129 = CARTESIAN_POINT('',(0.,0.)); +#50130 = VECTOR('',#50131,1.); +#50131 = DIRECTION('',(0.,-1.)); +#50132 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50133 = ORIENTED_EDGE('',*,*,#43888,.F.); +#50134 = ADVANCED_FACE('',(#50135),#43876,.F.); +#50135 = FACE_BOUND('',#50136,.F.); +#50136 = EDGE_LOOP('',(#50137,#50138,#50139,#50160)); +#50137 = ORIENTED_EDGE('',*,*,#50113,.T.); +#50138 = ORIENTED_EDGE('',*,*,#46838,.T.); +#50139 = ORIENTED_EDGE('',*,*,#50140,.F.); +#50140 = EDGE_CURVE('',#43833,#46816,#50141,.T.); +#50141 = SURFACE_CURVE('',#50142,(#50146,#50153),.PCURVE_S1.); +#50142 = LINE('',#50143,#50144); +#50143 = CARTESIAN_POINT('',(137.281735,-52.665378,0.)); +#50144 = VECTOR('',#50145,1.); +#50145 = DIRECTION('',(0.,0.,1.)); +#50146 = PCURVE('',#43876,#50147); +#50147 = DEFINITIONAL_REPRESENTATION('',(#50148),#50152); +#50148 = LINE('',#50149,#50150); +#50149 = CARTESIAN_POINT('',(0.235320246109,0.)); +#50150 = VECTOR('',#50151,1.); +#50151 = DIRECTION('',(0.,-1.)); +#50152 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50153 = PCURVE('',#43848,#50154); +#50154 = DEFINITIONAL_REPRESENTATION('',(#50155),#50159); +#50155 = LINE('',#50156,#50157); +#50156 = CARTESIAN_POINT('',(0.,0.)); +#50157 = VECTOR('',#50158,1.); +#50158 = DIRECTION('',(0.,-1.)); +#50159 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50160 = ORIENTED_EDGE('',*,*,#43860,.F.); +#50161 = ADVANCED_FACE('',(#50162),#43848,.F.); +#50162 = FACE_BOUND('',#50163,.F.); +#50163 = EDGE_LOOP('',(#50164,#50165,#50166,#50187)); +#50164 = ORIENTED_EDGE('',*,*,#50140,.T.); +#50165 = ORIENTED_EDGE('',*,*,#46815,.T.); +#50166 = ORIENTED_EDGE('',*,*,#50167,.F.); +#50167 = EDGE_CURVE('',#43805,#46793,#50168,.T.); +#50168 = SURFACE_CURVE('',#50169,(#50173,#50180),.PCURVE_S1.); +#50169 = LINE('',#50170,#50171); +#50170 = CARTESIAN_POINT('',(137.068462,-52.565927,0.)); +#50171 = VECTOR('',#50172,1.); +#50172 = DIRECTION('',(0.,0.,1.)); +#50173 = PCURVE('',#43848,#50174); +#50174 = DEFINITIONAL_REPRESENTATION('',(#50175),#50179); +#50175 = LINE('',#50176,#50177); +#50176 = CARTESIAN_POINT('',(0.235320789413,0.)); +#50177 = VECTOR('',#50178,1.); +#50178 = DIRECTION('',(0.,-1.)); +#50179 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50180 = PCURVE('',#43820,#50181); +#50181 = DEFINITIONAL_REPRESENTATION('',(#50182),#50186); +#50182 = LINE('',#50183,#50184); +#50183 = CARTESIAN_POINT('',(0.,0.)); +#50184 = VECTOR('',#50185,1.); +#50185 = DIRECTION('',(0.,-1.)); +#50186 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50187 = ORIENTED_EDGE('',*,*,#43832,.F.); +#50188 = ADVANCED_FACE('',(#50189),#43820,.F.); +#50189 = FACE_BOUND('',#50190,.F.); +#50190 = EDGE_LOOP('',(#50191,#50192,#50193,#50214)); +#50191 = ORIENTED_EDGE('',*,*,#50167,.T.); +#50192 = ORIENTED_EDGE('',*,*,#46792,.T.); +#50193 = ORIENTED_EDGE('',*,*,#50194,.F.); +#50194 = EDGE_CURVE('',#43777,#46770,#50195,.T.); +#50195 = SURFACE_CURVE('',#50196,(#50200,#50207),.PCURVE_S1.); +#50196 = LINE('',#50197,#50198); +#50197 = CARTESIAN_POINT('',(136.875699,-52.430953,0.)); +#50198 = VECTOR('',#50199,1.); +#50199 = DIRECTION('',(0.,0.,1.)); +#50200 = PCURVE('',#43820,#50201); +#50201 = DEFINITIONAL_REPRESENTATION('',(#50202),#50206); +#50202 = LINE('',#50203,#50204); +#50203 = CARTESIAN_POINT('',(0.235320111433,0.)); +#50204 = VECTOR('',#50205,1.); +#50205 = DIRECTION('',(0.,-1.)); +#50206 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50207 = PCURVE('',#43792,#50208); +#50208 = DEFINITIONAL_REPRESENTATION('',(#50209),#50213); +#50209 = LINE('',#50210,#50211); +#50210 = CARTESIAN_POINT('',(0.,0.)); +#50211 = VECTOR('',#50212,1.); +#50212 = DIRECTION('',(0.,-1.)); +#50213 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50214 = ORIENTED_EDGE('',*,*,#43804,.F.); +#50215 = ADVANCED_FACE('',(#50216),#43792,.F.); +#50216 = FACE_BOUND('',#50217,.F.); +#50217 = EDGE_LOOP('',(#50218,#50219,#50220,#50241)); +#50218 = ORIENTED_EDGE('',*,*,#50194,.T.); +#50219 = ORIENTED_EDGE('',*,*,#46769,.T.); +#50220 = ORIENTED_EDGE('',*,*,#50221,.F.); +#50221 = EDGE_CURVE('',#43749,#46747,#50222,.T.); +#50222 = SURFACE_CURVE('',#50223,(#50227,#50234),.PCURVE_S1.); +#50223 = LINE('',#50224,#50225); +#50224 = CARTESIAN_POINT('',(136.709302,-52.264556,0.)); +#50225 = VECTOR('',#50226,1.); +#50226 = DIRECTION('',(0.,0.,1.)); +#50227 = PCURVE('',#43792,#50228); +#50228 = DEFINITIONAL_REPRESENTATION('',(#50229),#50233); +#50229 = LINE('',#50230,#50231); +#50230 = CARTESIAN_POINT('',(0.235320894138,0.)); +#50231 = VECTOR('',#50232,1.); +#50232 = DIRECTION('',(0.,-1.)); +#50233 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50234 = PCURVE('',#43764,#50235); +#50235 = DEFINITIONAL_REPRESENTATION('',(#50236),#50240); +#50236 = LINE('',#50237,#50238); +#50237 = CARTESIAN_POINT('',(0.,0.)); +#50238 = VECTOR('',#50239,1.); +#50239 = DIRECTION('',(0.,-1.)); +#50240 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50241 = ORIENTED_EDGE('',*,*,#43776,.F.); +#50242 = ADVANCED_FACE('',(#50243),#43764,.F.); +#50243 = FACE_BOUND('',#50244,.F.); +#50244 = EDGE_LOOP('',(#50245,#50246,#50247,#50268)); +#50245 = ORIENTED_EDGE('',*,*,#50221,.T.); +#50246 = ORIENTED_EDGE('',*,*,#46746,.T.); +#50247 = ORIENTED_EDGE('',*,*,#50248,.F.); +#50248 = EDGE_CURVE('',#43721,#46724,#50249,.T.); +#50249 = SURFACE_CURVE('',#50250,(#50254,#50261),.PCURVE_S1.); +#50250 = LINE('',#50251,#50252); +#50251 = CARTESIAN_POINT('',(136.574328,-52.071793,0.)); +#50252 = VECTOR('',#50253,1.); +#50253 = DIRECTION('',(0.,0.,1.)); +#50254 = PCURVE('',#43764,#50255); +#50255 = DEFINITIONAL_REPRESENTATION('',(#50256),#50260); +#50256 = LINE('',#50257,#50258); +#50257 = CARTESIAN_POINT('',(0.235320111433,0.)); +#50258 = VECTOR('',#50259,1.); +#50259 = DIRECTION('',(0.,-1.)); +#50260 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50261 = PCURVE('',#43736,#50262); +#50262 = DEFINITIONAL_REPRESENTATION('',(#50263),#50267); +#50263 = LINE('',#50264,#50265); +#50264 = CARTESIAN_POINT('',(0.,0.)); +#50265 = VECTOR('',#50266,1.); +#50266 = DIRECTION('',(0.,-1.)); +#50267 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50268 = ORIENTED_EDGE('',*,*,#43748,.F.); +#50269 = ADVANCED_FACE('',(#50270),#43736,.F.); +#50270 = FACE_BOUND('',#50271,.F.); +#50271 = EDGE_LOOP('',(#50272,#50273,#50274,#50295)); +#50272 = ORIENTED_EDGE('',*,*,#50248,.T.); +#50273 = ORIENTED_EDGE('',*,*,#46723,.T.); +#50274 = ORIENTED_EDGE('',*,*,#50275,.F.); +#50275 = EDGE_CURVE('',#43693,#46701,#50276,.T.); +#50276 = SURFACE_CURVE('',#50277,(#50281,#50288),.PCURVE_S1.); +#50277 = LINE('',#50278,#50279); +#50278 = CARTESIAN_POINT('',(136.474877,-51.85852,0.)); +#50279 = VECTOR('',#50280,1.); +#50280 = DIRECTION('',(0.,0.,1.)); +#50281 = PCURVE('',#43736,#50282); +#50282 = DEFINITIONAL_REPRESENTATION('',(#50283),#50287); +#50283 = LINE('',#50284,#50285); +#50284 = CARTESIAN_POINT('',(0.235320789413,0.)); +#50285 = VECTOR('',#50286,1.); +#50286 = DIRECTION('',(0.,-1.)); +#50287 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50288 = PCURVE('',#43708,#50289); +#50289 = DEFINITIONAL_REPRESENTATION('',(#50290),#50294); +#50290 = LINE('',#50291,#50292); +#50291 = CARTESIAN_POINT('',(0.,0.)); +#50292 = VECTOR('',#50293,1.); +#50293 = DIRECTION('',(0.,-1.)); +#50294 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50295 = ORIENTED_EDGE('',*,*,#43720,.F.); +#50296 = ADVANCED_FACE('',(#50297),#43708,.F.); +#50297 = FACE_BOUND('',#50298,.F.); +#50298 = EDGE_LOOP('',(#50299,#50300,#50301,#50322)); +#50299 = ORIENTED_EDGE('',*,*,#50275,.T.); +#50300 = ORIENTED_EDGE('',*,*,#46700,.T.); +#50301 = ORIENTED_EDGE('',*,*,#50302,.F.); +#50302 = EDGE_CURVE('',#43665,#46678,#50303,.T.); +#50303 = SURFACE_CURVE('',#50304,(#50308,#50315),.PCURVE_S1.); +#50304 = LINE('',#50305,#50306); +#50305 = CARTESIAN_POINT('',(136.413972,-51.631218,0.)); +#50306 = VECTOR('',#50307,1.); +#50307 = DIRECTION('',(0.,0.,1.)); +#50308 = PCURVE('',#43708,#50309); +#50309 = DEFINITIONAL_REPRESENTATION('',(#50310),#50314); +#50310 = LINE('',#50311,#50312); +#50311 = CARTESIAN_POINT('',(0.235320246109,0.)); +#50312 = VECTOR('',#50313,1.); +#50313 = DIRECTION('',(0.,-1.)); +#50314 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50315 = PCURVE('',#43680,#50316); +#50316 = DEFINITIONAL_REPRESENTATION('',(#50317),#50321); +#50317 = LINE('',#50318,#50319); +#50318 = CARTESIAN_POINT('',(0.,0.)); +#50319 = VECTOR('',#50320,1.); +#50320 = DIRECTION('',(0.,-1.)); +#50321 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50322 = ORIENTED_EDGE('',*,*,#43692,.F.); +#50323 = ADVANCED_FACE('',(#50324),#43680,.F.); +#50324 = FACE_BOUND('',#50325,.F.); +#50325 = EDGE_LOOP('',(#50326,#50327,#50328,#50349)); +#50326 = ORIENTED_EDGE('',*,*,#50302,.T.); +#50327 = ORIENTED_EDGE('',*,*,#46677,.T.); +#50328 = ORIENTED_EDGE('',*,*,#50329,.F.); +#50329 = EDGE_CURVE('',#43637,#46655,#50330,.T.); +#50330 = SURFACE_CURVE('',#50331,(#50335,#50342),.PCURVE_S1.); +#50331 = LINE('',#50332,#50333); +#50332 = CARTESIAN_POINT('',(136.393462,-51.396793,0.)); +#50333 = VECTOR('',#50334,1.); +#50334 = DIRECTION('',(0.,0.,1.)); +#50335 = PCURVE('',#43680,#50336); +#50336 = DEFINITIONAL_REPRESENTATION('',(#50337),#50341); +#50337 = LINE('',#50338,#50339); +#50338 = CARTESIAN_POINT('',(0.235320506384,0.)); +#50339 = VECTOR('',#50340,1.); +#50340 = DIRECTION('',(0.,-1.)); +#50341 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50342 = PCURVE('',#43652,#50343); +#50343 = DEFINITIONAL_REPRESENTATION('',(#50344),#50348); +#50344 = LINE('',#50345,#50346); +#50345 = CARTESIAN_POINT('',(0.,0.)); +#50346 = VECTOR('',#50347,1.); +#50347 = DIRECTION('',(0.,-1.)); +#50348 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50349 = ORIENTED_EDGE('',*,*,#43664,.F.); +#50350 = ADVANCED_FACE('',(#50351),#43652,.F.); +#50351 = FACE_BOUND('',#50352,.F.); +#50352 = EDGE_LOOP('',(#50353,#50354,#50355,#50376)); +#50353 = ORIENTED_EDGE('',*,*,#50329,.T.); +#50354 = ORIENTED_EDGE('',*,*,#46654,.T.); +#50355 = ORIENTED_EDGE('',*,*,#50356,.F.); +#50356 = EDGE_CURVE('',#43609,#46632,#50357,.T.); +#50357 = SURFACE_CURVE('',#50358,(#50362,#50369),.PCURVE_S1.); +#50358 = LINE('',#50359,#50360); +#50359 = CARTESIAN_POINT('',(136.413972,-51.162368,0.)); +#50360 = VECTOR('',#50361,1.); +#50361 = DIRECTION('',(0.,0.,1.)); +#50362 = PCURVE('',#43652,#50363); +#50363 = DEFINITIONAL_REPRESENTATION('',(#50364),#50368); +#50364 = LINE('',#50365,#50366); +#50365 = CARTESIAN_POINT('',(0.235320506384,0.)); +#50366 = VECTOR('',#50367,1.); +#50367 = DIRECTION('',(0.,-1.)); +#50368 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50369 = PCURVE('',#43624,#50370); +#50370 = DEFINITIONAL_REPRESENTATION('',(#50371),#50375); +#50371 = LINE('',#50372,#50373); +#50372 = CARTESIAN_POINT('',(0.,0.)); +#50373 = VECTOR('',#50374,1.); +#50374 = DIRECTION('',(0.,-1.)); +#50375 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50376 = ORIENTED_EDGE('',*,*,#43636,.F.); +#50377 = ADVANCED_FACE('',(#50378),#43624,.F.); +#50378 = FACE_BOUND('',#50379,.F.); +#50379 = EDGE_LOOP('',(#50380,#50381,#50382,#50403)); +#50380 = ORIENTED_EDGE('',*,*,#50356,.T.); +#50381 = ORIENTED_EDGE('',*,*,#46631,.T.); +#50382 = ORIENTED_EDGE('',*,*,#50383,.F.); +#50383 = EDGE_CURVE('',#43581,#46609,#50384,.T.); +#50384 = SURFACE_CURVE('',#50385,(#50389,#50396),.PCURVE_S1.); +#50385 = LINE('',#50386,#50387); +#50386 = CARTESIAN_POINT('',(136.474877,-50.935066,0.)); +#50387 = VECTOR('',#50388,1.); +#50388 = DIRECTION('',(0.,0.,1.)); +#50389 = PCURVE('',#43624,#50390); +#50390 = DEFINITIONAL_REPRESENTATION('',(#50391),#50395); +#50391 = LINE('',#50392,#50393); +#50392 = CARTESIAN_POINT('',(0.235320246109,0.)); +#50393 = VECTOR('',#50394,1.); +#50394 = DIRECTION('',(0.,-1.)); +#50395 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50396 = PCURVE('',#43596,#50397); +#50397 = DEFINITIONAL_REPRESENTATION('',(#50398),#50402); +#50398 = LINE('',#50399,#50400); +#50399 = CARTESIAN_POINT('',(0.,0.)); +#50400 = VECTOR('',#50401,1.); +#50401 = DIRECTION('',(0.,-1.)); +#50402 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50403 = ORIENTED_EDGE('',*,*,#43608,.F.); +#50404 = ADVANCED_FACE('',(#50405),#43596,.F.); +#50405 = FACE_BOUND('',#50406,.F.); +#50406 = EDGE_LOOP('',(#50407,#50408,#50409,#50430)); +#50407 = ORIENTED_EDGE('',*,*,#50383,.T.); +#50408 = ORIENTED_EDGE('',*,*,#46608,.T.); +#50409 = ORIENTED_EDGE('',*,*,#50410,.F.); +#50410 = EDGE_CURVE('',#43553,#46586,#50411,.T.); +#50411 = SURFACE_CURVE('',#50412,(#50416,#50423),.PCURVE_S1.); +#50412 = LINE('',#50413,#50414); +#50413 = CARTESIAN_POINT('',(136.574328,-50.721793,0.)); +#50414 = VECTOR('',#50415,1.); +#50415 = DIRECTION('',(0.,0.,1.)); +#50416 = PCURVE('',#43596,#50417); +#50417 = DEFINITIONAL_REPRESENTATION('',(#50418),#50422); +#50418 = LINE('',#50419,#50420); +#50419 = CARTESIAN_POINT('',(0.235320789413,0.)); +#50420 = VECTOR('',#50421,1.); +#50421 = DIRECTION('',(0.,-1.)); +#50422 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50423 = PCURVE('',#43568,#50424); +#50424 = DEFINITIONAL_REPRESENTATION('',(#50425),#50429); +#50425 = LINE('',#50426,#50427); +#50426 = CARTESIAN_POINT('',(0.,0.)); +#50427 = VECTOR('',#50428,1.); +#50428 = DIRECTION('',(0.,-1.)); +#50429 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50430 = ORIENTED_EDGE('',*,*,#43580,.F.); +#50431 = ADVANCED_FACE('',(#50432),#43568,.F.); +#50432 = FACE_BOUND('',#50433,.F.); +#50433 = EDGE_LOOP('',(#50434,#50435,#50436,#50457)); +#50434 = ORIENTED_EDGE('',*,*,#50410,.T.); +#50435 = ORIENTED_EDGE('',*,*,#46585,.T.); +#50436 = ORIENTED_EDGE('',*,*,#50437,.F.); +#50437 = EDGE_CURVE('',#43525,#46563,#50438,.T.); +#50438 = SURFACE_CURVE('',#50439,(#50443,#50450),.PCURVE_S1.); +#50439 = LINE('',#50440,#50441); +#50440 = CARTESIAN_POINT('',(136.709302,-50.52903,0.)); +#50441 = VECTOR('',#50442,1.); +#50442 = DIRECTION('',(0.,0.,1.)); +#50443 = PCURVE('',#43568,#50444); +#50444 = DEFINITIONAL_REPRESENTATION('',(#50445),#50449); +#50445 = LINE('',#50446,#50447); +#50446 = CARTESIAN_POINT('',(0.235320111433,0.)); +#50447 = VECTOR('',#50448,1.); +#50448 = DIRECTION('',(0.,-1.)); +#50449 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50450 = PCURVE('',#43540,#50451); +#50451 = DEFINITIONAL_REPRESENTATION('',(#50452),#50456); +#50452 = LINE('',#50453,#50454); +#50453 = CARTESIAN_POINT('',(0.,0.)); +#50454 = VECTOR('',#50455,1.); +#50455 = DIRECTION('',(0.,-1.)); +#50456 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50457 = ORIENTED_EDGE('',*,*,#43552,.F.); +#50458 = ADVANCED_FACE('',(#50459),#43540,.F.); +#50459 = FACE_BOUND('',#50460,.F.); +#50460 = EDGE_LOOP('',(#50461,#50462,#50463,#50484)); +#50461 = ORIENTED_EDGE('',*,*,#50437,.T.); +#50462 = ORIENTED_EDGE('',*,*,#46562,.T.); +#50463 = ORIENTED_EDGE('',*,*,#50464,.F.); +#50464 = EDGE_CURVE('',#43497,#46540,#50465,.T.); +#50465 = SURFACE_CURVE('',#50466,(#50470,#50477),.PCURVE_S1.); +#50466 = LINE('',#50467,#50468); +#50467 = CARTESIAN_POINT('',(136.875699,-50.362633,0.)); +#50468 = VECTOR('',#50469,1.); +#50469 = DIRECTION('',(0.,0.,1.)); +#50470 = PCURVE('',#43540,#50471); +#50471 = DEFINITIONAL_REPRESENTATION('',(#50472),#50476); +#50472 = LINE('',#50473,#50474); +#50473 = CARTESIAN_POINT('',(0.235320894138,0.)); +#50474 = VECTOR('',#50475,1.); +#50475 = DIRECTION('',(0.,-1.)); +#50476 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50477 = PCURVE('',#43512,#50478); +#50478 = DEFINITIONAL_REPRESENTATION('',(#50479),#50483); +#50479 = LINE('',#50480,#50481); +#50480 = CARTESIAN_POINT('',(0.,0.)); +#50481 = VECTOR('',#50482,1.); +#50482 = DIRECTION('',(0.,-1.)); +#50483 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50484 = ORIENTED_EDGE('',*,*,#43524,.F.); +#50485 = ADVANCED_FACE('',(#50486),#43512,.F.); +#50486 = FACE_BOUND('',#50487,.F.); +#50487 = EDGE_LOOP('',(#50488,#50489,#50490,#50511)); +#50488 = ORIENTED_EDGE('',*,*,#50464,.T.); +#50489 = ORIENTED_EDGE('',*,*,#46539,.T.); +#50490 = ORIENTED_EDGE('',*,*,#50491,.F.); +#50491 = EDGE_CURVE('',#43469,#46517,#50492,.T.); +#50492 = SURFACE_CURVE('',#50493,(#50497,#50504),.PCURVE_S1.); +#50493 = LINE('',#50494,#50495); +#50494 = CARTESIAN_POINT('',(137.068462,-50.227659,0.)); +#50495 = VECTOR('',#50496,1.); +#50496 = DIRECTION('',(0.,0.,1.)); +#50497 = PCURVE('',#43512,#50498); +#50498 = DEFINITIONAL_REPRESENTATION('',(#50499),#50503); +#50499 = LINE('',#50500,#50501); +#50500 = CARTESIAN_POINT('',(0.235320111433,0.)); +#50501 = VECTOR('',#50502,1.); +#50502 = DIRECTION('',(0.,-1.)); +#50503 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50504 = PCURVE('',#43484,#50505); +#50505 = DEFINITIONAL_REPRESENTATION('',(#50506),#50510); +#50506 = LINE('',#50507,#50508); +#50507 = CARTESIAN_POINT('',(0.,0.)); +#50508 = VECTOR('',#50509,1.); +#50509 = DIRECTION('',(0.,-1.)); +#50510 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50511 = ORIENTED_EDGE('',*,*,#43496,.F.); +#50512 = ADVANCED_FACE('',(#50513),#43484,.F.); +#50513 = FACE_BOUND('',#50514,.F.); +#50514 = EDGE_LOOP('',(#50515,#50516,#50517,#50538)); +#50515 = ORIENTED_EDGE('',*,*,#50491,.T.); +#50516 = ORIENTED_EDGE('',*,*,#46516,.T.); +#50517 = ORIENTED_EDGE('',*,*,#50518,.F.); +#50518 = EDGE_CURVE('',#43441,#46494,#50519,.T.); +#50519 = SURFACE_CURVE('',#50520,(#50524,#50531),.PCURVE_S1.); +#50520 = LINE('',#50521,#50522); +#50521 = CARTESIAN_POINT('',(137.281735,-50.128208,0.)); +#50522 = VECTOR('',#50523,1.); +#50523 = DIRECTION('',(0.,0.,1.)); +#50524 = PCURVE('',#43484,#50525); +#50525 = DEFINITIONAL_REPRESENTATION('',(#50526),#50530); +#50526 = LINE('',#50527,#50528); +#50527 = CARTESIAN_POINT('',(0.235320789413,0.)); +#50528 = VECTOR('',#50529,1.); +#50529 = DIRECTION('',(0.,-1.)); +#50530 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50531 = PCURVE('',#43456,#50532); +#50532 = DEFINITIONAL_REPRESENTATION('',(#50533),#50537); +#50533 = LINE('',#50534,#50535); +#50534 = CARTESIAN_POINT('',(0.,0.)); +#50535 = VECTOR('',#50536,1.); +#50536 = DIRECTION('',(0.,-1.)); +#50537 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50538 = ORIENTED_EDGE('',*,*,#43468,.F.); +#50539 = ADVANCED_FACE('',(#50540),#43456,.F.); +#50540 = FACE_BOUND('',#50541,.F.); +#50541 = EDGE_LOOP('',(#50542,#50543,#50544,#50565)); +#50542 = ORIENTED_EDGE('',*,*,#50518,.T.); +#50543 = ORIENTED_EDGE('',*,*,#46493,.T.); +#50544 = ORIENTED_EDGE('',*,*,#50545,.F.); +#50545 = EDGE_CURVE('',#43413,#46471,#50546,.T.); +#50546 = SURFACE_CURVE('',#50547,(#50551,#50558),.PCURVE_S1.); +#50547 = LINE('',#50548,#50549); +#50548 = CARTESIAN_POINT('',(137.509037,-50.067303,0.)); +#50549 = VECTOR('',#50550,1.); +#50550 = DIRECTION('',(0.,0.,1.)); +#50551 = PCURVE('',#43456,#50552); +#50552 = DEFINITIONAL_REPRESENTATION('',(#50553),#50557); +#50553 = LINE('',#50554,#50555); +#50554 = CARTESIAN_POINT('',(0.235320246109,0.)); +#50555 = VECTOR('',#50556,1.); +#50556 = DIRECTION('',(0.,-1.)); +#50557 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50558 = PCURVE('',#43428,#50559); +#50559 = DEFINITIONAL_REPRESENTATION('',(#50560),#50564); +#50560 = LINE('',#50561,#50562); +#50561 = CARTESIAN_POINT('',(0.,0.)); +#50562 = VECTOR('',#50563,1.); +#50563 = DIRECTION('',(0.,-1.)); +#50564 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50565 = ORIENTED_EDGE('',*,*,#43440,.F.); +#50566 = ADVANCED_FACE('',(#50567),#43428,.F.); +#50567 = FACE_BOUND('',#50568,.F.); +#50568 = EDGE_LOOP('',(#50569,#50570,#50571,#50592)); +#50569 = ORIENTED_EDGE('',*,*,#50545,.T.); +#50570 = ORIENTED_EDGE('',*,*,#46470,.T.); +#50571 = ORIENTED_EDGE('',*,*,#50572,.F.); +#50572 = EDGE_CURVE('',#43385,#46448,#50573,.T.); +#50573 = SURFACE_CURVE('',#50574,(#50578,#50585),.PCURVE_S1.); +#50574 = LINE('',#50575,#50576); +#50575 = CARTESIAN_POINT('',(137.743462,-50.046793,0.)); +#50576 = VECTOR('',#50577,1.); +#50577 = DIRECTION('',(0.,0.,1.)); +#50578 = PCURVE('',#43428,#50579); +#50579 = DEFINITIONAL_REPRESENTATION('',(#50580),#50584); +#50580 = LINE('',#50581,#50582); +#50581 = CARTESIAN_POINT('',(0.235320506384,0.)); +#50582 = VECTOR('',#50583,1.); +#50583 = DIRECTION('',(0.,-1.)); +#50584 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50585 = PCURVE('',#43400,#50586); +#50586 = DEFINITIONAL_REPRESENTATION('',(#50587),#50591); +#50587 = LINE('',#50588,#50589); +#50588 = CARTESIAN_POINT('',(0.,0.)); +#50589 = VECTOR('',#50590,1.); +#50590 = DIRECTION('',(0.,-1.)); +#50591 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50592 = ORIENTED_EDGE('',*,*,#43412,.F.); +#50593 = ADVANCED_FACE('',(#50594),#43400,.F.); +#50594 = FACE_BOUND('',#50595,.F.); +#50595 = EDGE_LOOP('',(#50596,#50597,#50598,#50619)); +#50596 = ORIENTED_EDGE('',*,*,#50572,.T.); +#50597 = ORIENTED_EDGE('',*,*,#46447,.T.); +#50598 = ORIENTED_EDGE('',*,*,#50599,.F.); +#50599 = EDGE_CURVE('',#43357,#46425,#50600,.T.); +#50600 = SURFACE_CURVE('',#50601,(#50605,#50612),.PCURVE_S1.); +#50601 = LINE('',#50602,#50603); +#50602 = CARTESIAN_POINT('',(138.543462,-50.046793,0.)); +#50603 = VECTOR('',#50604,1.); +#50604 = DIRECTION('',(0.,0.,1.)); +#50605 = PCURVE('',#43400,#50606); +#50606 = DEFINITIONAL_REPRESENTATION('',(#50607),#50611); +#50607 = LINE('',#50608,#50609); +#50608 = CARTESIAN_POINT('',(0.8,0.)); +#50609 = VECTOR('',#50610,1.); +#50610 = DIRECTION('',(0.,-1.)); +#50611 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50612 = PCURVE('',#43372,#50613); +#50613 = DEFINITIONAL_REPRESENTATION('',(#50614),#50618); +#50614 = LINE('',#50615,#50616); +#50615 = CARTESIAN_POINT('',(0.,0.)); +#50616 = VECTOR('',#50617,1.); +#50617 = DIRECTION('',(0.,-1.)); +#50618 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) +PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE','' + ) ); +#50619 = ORIENTED_EDGE('',*,*,#43384,.F.); +#50620 = ADVANCED_FACE('',(#50621),#43372,.F.); +#50621 = FACE_BOUND('',#50622,.F.); +#50622 = EDGE_LOOP('',(#50623,#50624,#50625,#50626)); +#50623 = ORIENTED_EDGE('',*,*,#50599,.T.); +#50624 = ORIENTED_EDGE('',*,*,#46424,.T.); +#50625 = ORIENTED_EDGE('',*,*,#49605,.F.); +#50626 = ORIENTED_EDGE('',*,*,#43356,.F.); +#50627 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) +GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#50631)) +GLOBAL_UNIT_ASSIGNED_CONTEXT((#50628,#50629,#50630)) +REPRESENTATION_CONTEXT('Context #1', + '3D Context with UNIT and UNCERTAINTY') ); +#50628 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) ); +#50629 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) ); +#50630 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() ); +#50631 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-02),#50628, + 'distance_accuracy_value','confusion accuracy'); +#50632 = SHAPE_DEFINITION_REPRESENTATION(#50633,#40616); +#50633 = PRODUCT_DEFINITION_SHAPE('','',#50634); +#50634 = PRODUCT_DEFINITION('design','',#50635,#50638); +#50635 = PRODUCT_DEFINITION_FORMATION('','',#50636); +#50636 = PRODUCT('PCB','PCB','',(#50637)); +#50637 = PRODUCT_CONTEXT('',#2,'mechanical'); +#50638 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design'); +#50639 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#50640,#50642); +#50640 = ( REPRESENTATION_RELATIONSHIP('','',#40616,#10) +REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#50641) +SHAPE_REPRESENTATION_RELATIONSHIP() ); +#50641 = ITEM_DEFINED_TRANSFORMATION('','',#11,#223); +#50642 = PRODUCT_DEFINITION_SHAPE('Placement','Placement of an item', + #50643); +#50643 = NEXT_ASSEMBLY_USAGE_OCCURRENCE('60','','',#5,#50634,$); +#50644 = PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#50636)); +#50645 = SHAPE_DEFINITION_REPRESENTATION(#50642,#50646); +#50646 = SHAPE_REPRESENTATION('',(#223),#50627); +#50647 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #50648,#50656,#50663,#50670,#50677,#50684,#50692,#50699,#50706, + #50713,#50720,#50727,#50734,#50741,#50748,#50755,#50762,#50769, + #50776,#50783,#50790,#50797,#50804,#50811,#50818,#50825,#50832, + #50839,#50846,#50853,#50860,#50867,#50874,#50881,#50888,#50895, + #50902,#50909,#50916,#50923,#50930,#50937,#50944,#50951,#50958, + #50965,#50972,#50979,#50986,#50993,#51000,#51007,#51014,#51021, + #51028,#51036,#51043,#51050,#51057,#51064,#51071,#51078,#51085, + #51092,#51099,#51106,#51113),#26283); +#50648 = STYLED_ITEM('color',(#50649),#22137); +#50649 = PRESENTATION_STYLE_ASSIGNMENT((#50650)); +#50650 = SURFACE_STYLE_USAGE(.BOTH.,#50651); +#50651 = SURFACE_SIDE_STYLE('',(#50652)); +#50652 = SURFACE_STYLE_FILL_AREA(#50653); +#50653 = FILL_AREA_STYLE('',(#50654)); +#50654 = FILL_AREA_STYLE_COLOUR('',#50655); +#50655 = COLOUR_RGB('',0.823529417451,0.819607860991,0.780392170416); +#50656 = STYLED_ITEM('color',(#50657),#22257); +#50657 = PRESENTATION_STYLE_ASSIGNMENT((#50658)); +#50658 = SURFACE_STYLE_USAGE(.BOTH.,#50659); +#50659 = SURFACE_SIDE_STYLE('',(#50660)); +#50660 = SURFACE_STYLE_FILL_AREA(#50661); +#50661 = FILL_AREA_STYLE('',(#50662)); +#50662 = FILL_AREA_STYLE_COLOUR('',#50655); +#50663 = STYLED_ITEM('color',(#50664),#22365); +#50664 = PRESENTATION_STYLE_ASSIGNMENT((#50665)); +#50665 = SURFACE_STYLE_USAGE(.BOTH.,#50666); +#50666 = SURFACE_SIDE_STYLE('',(#50667)); +#50667 = SURFACE_STYLE_FILL_AREA(#50668); +#50668 = FILL_AREA_STYLE('',(#50669)); +#50669 = FILL_AREA_STYLE_COLOUR('',#50655); +#50670 = STYLED_ITEM('color',(#50671),#22443); +#50671 = PRESENTATION_STYLE_ASSIGNMENT((#50672)); +#50672 = SURFACE_STYLE_USAGE(.BOTH.,#50673); +#50673 = SURFACE_SIDE_STYLE('',(#50674)); +#50674 = SURFACE_STYLE_FILL_AREA(#50675); +#50675 = FILL_AREA_STYLE('',(#50676)); +#50676 = FILL_AREA_STYLE_COLOUR('',#50655); +#50677 = STYLED_ITEM('color',(#50678),#22644); +#50678 = PRESENTATION_STYLE_ASSIGNMENT((#50679)); +#50679 = SURFACE_STYLE_USAGE(.BOTH.,#50680); +#50680 = SURFACE_SIDE_STYLE('',(#50681)); +#50681 = SURFACE_STYLE_FILL_AREA(#50682); +#50682 = FILL_AREA_STYLE('',(#50683)); +#50683 = FILL_AREA_STYLE_COLOUR('',#50655); +#50684 = STYLED_ITEM('color',(#50685),#22820); +#50685 = PRESENTATION_STYLE_ASSIGNMENT((#50686)); +#50686 = SURFACE_STYLE_USAGE(.BOTH.,#50687); +#50687 = SURFACE_SIDE_STYLE('',(#50688)); +#50688 = SURFACE_STYLE_FILL_AREA(#50689); +#50689 = FILL_AREA_STYLE('',(#50690)); +#50690 = FILL_AREA_STYLE_COLOUR('',#50691); +#50691 = COLOUR_RGB('',0.145098047169,0.14117647753,0.14117647753); +#50692 = STYLED_ITEM('color',(#50693),#22949); +#50693 = PRESENTATION_STYLE_ASSIGNMENT((#50694)); +#50694 = SURFACE_STYLE_USAGE(.BOTH.,#50695); +#50695 = SURFACE_SIDE_STYLE('',(#50696)); +#50696 = SURFACE_STYLE_FILL_AREA(#50697); +#50697 = FILL_AREA_STYLE('',(#50698)); +#50698 = FILL_AREA_STYLE_COLOUR('',#50655); +#50699 = STYLED_ITEM('color',(#50700),#22976); +#50700 = PRESENTATION_STYLE_ASSIGNMENT((#50701)); +#50701 = SURFACE_STYLE_USAGE(.BOTH.,#50702); +#50702 = SURFACE_SIDE_STYLE('',(#50703)); +#50703 = SURFACE_STYLE_FILL_AREA(#50704); +#50704 = FILL_AREA_STYLE('',(#50705)); +#50705 = FILL_AREA_STYLE_COLOUR('',#50691); +#50706 = STYLED_ITEM('color',(#50707),#23032); +#50707 = PRESENTATION_STYLE_ASSIGNMENT((#50708)); +#50708 = SURFACE_STYLE_USAGE(.BOTH.,#50709); +#50709 = SURFACE_SIDE_STYLE('',(#50710)); +#50710 = SURFACE_STYLE_FILL_AREA(#50711); +#50711 = FILL_AREA_STYLE('',(#50712)); +#50712 = FILL_AREA_STYLE_COLOUR('',#50655); +#50713 = STYLED_ITEM('color',(#50714),#23084); +#50714 = PRESENTATION_STYLE_ASSIGNMENT((#50715)); +#50715 = SURFACE_STYLE_USAGE(.BOTH.,#50716); +#50716 = SURFACE_SIDE_STYLE('',(#50717)); +#50717 = SURFACE_STYLE_FILL_AREA(#50718); +#50718 = FILL_AREA_STYLE('',(#50719)); +#50719 = FILL_AREA_STYLE_COLOUR('',#50655); +#50720 = STYLED_ITEM('color',(#50721),#23111); +#50721 = PRESENTATION_STYLE_ASSIGNMENT((#50722)); +#50722 = SURFACE_STYLE_USAGE(.BOTH.,#50723); +#50723 = SURFACE_SIDE_STYLE('',(#50724)); +#50724 = SURFACE_STYLE_FILL_AREA(#50725); +#50725 = FILL_AREA_STYLE('',(#50726)); +#50726 = FILL_AREA_STYLE_COLOUR('',#50655); +#50727 = STYLED_ITEM('color',(#50728),#23138); +#50728 = PRESENTATION_STYLE_ASSIGNMENT((#50729)); +#50729 = SURFACE_STYLE_USAGE(.BOTH.,#50730); +#50730 = SURFACE_SIDE_STYLE('',(#50731)); +#50731 = SURFACE_STYLE_FILL_AREA(#50732); +#50732 = FILL_AREA_STYLE('',(#50733)); +#50733 = FILL_AREA_STYLE_COLOUR('',#50655); +#50734 = STYLED_ITEM('color',(#50735),#23165); +#50735 = PRESENTATION_STYLE_ASSIGNMENT((#50736)); +#50736 = SURFACE_STYLE_USAGE(.BOTH.,#50737); +#50737 = SURFACE_SIDE_STYLE('',(#50738)); +#50738 = SURFACE_STYLE_FILL_AREA(#50739); +#50739 = FILL_AREA_STYLE('',(#50740)); +#50740 = FILL_AREA_STYLE_COLOUR('',#50655); +#50741 = STYLED_ITEM('color',(#50742),#23172); +#50742 = PRESENTATION_STYLE_ASSIGNMENT((#50743)); +#50743 = SURFACE_STYLE_USAGE(.BOTH.,#50744); +#50744 = SURFACE_SIDE_STYLE('',(#50745)); +#50745 = SURFACE_STYLE_FILL_AREA(#50746); +#50746 = FILL_AREA_STYLE('',(#50747)); +#50747 = FILL_AREA_STYLE_COLOUR('',#50691); +#50748 = STYLED_ITEM('color',(#50749),#23228); +#50749 = PRESENTATION_STYLE_ASSIGNMENT((#50750)); +#50750 = SURFACE_STYLE_USAGE(.BOTH.,#50751); +#50751 = SURFACE_SIDE_STYLE('',(#50752)); +#50752 = SURFACE_STYLE_FILL_AREA(#50753); +#50753 = FILL_AREA_STYLE('',(#50754)); +#50754 = FILL_AREA_STYLE_COLOUR('',#50691); +#50755 = STYLED_ITEM('color',(#50756),#23409); +#50756 = PRESENTATION_STYLE_ASSIGNMENT((#50757)); +#50757 = SURFACE_STYLE_USAGE(.BOTH.,#50758); +#50758 = SURFACE_SIDE_STYLE('',(#50759)); +#50759 = SURFACE_STYLE_FILL_AREA(#50760); +#50760 = FILL_AREA_STYLE('',(#50761)); +#50761 = FILL_AREA_STYLE_COLOUR('',#50691); +#50762 = STYLED_ITEM('color',(#50763),#23457); +#50763 = PRESENTATION_STYLE_ASSIGNMENT((#50764)); +#50764 = SURFACE_STYLE_USAGE(.BOTH.,#50765); +#50765 = SURFACE_SIDE_STYLE('',(#50766)); +#50766 = SURFACE_STYLE_FILL_AREA(#50767); +#50767 = FILL_AREA_STYLE('',(#50768)); +#50768 = FILL_AREA_STYLE_COLOUR('',#50691); +#50769 = STYLED_ITEM('color',(#50770),#23505); +#50770 = PRESENTATION_STYLE_ASSIGNMENT((#50771)); +#50771 = SURFACE_STYLE_USAGE(.BOTH.,#50772); +#50772 = SURFACE_SIDE_STYLE('',(#50773)); +#50773 = SURFACE_STYLE_FILL_AREA(#50774); +#50774 = FILL_AREA_STYLE('',(#50775)); +#50775 = FILL_AREA_STYLE_COLOUR('',#50691); +#50776 = STYLED_ITEM('color',(#50777),#23561); +#50777 = PRESENTATION_STYLE_ASSIGNMENT((#50778)); +#50778 = SURFACE_STYLE_USAGE(.BOTH.,#50779); +#50779 = SURFACE_SIDE_STYLE('',(#50780)); +#50780 = SURFACE_STYLE_FILL_AREA(#50781); +#50781 = FILL_AREA_STYLE('',(#50782)); +#50782 = FILL_AREA_STYLE_COLOUR('',#50691); +#50783 = STYLED_ITEM('color',(#50784),#23634); +#50784 = PRESENTATION_STYLE_ASSIGNMENT((#50785)); +#50785 = SURFACE_STYLE_USAGE(.BOTH.,#50786); +#50786 = SURFACE_SIDE_STYLE('',(#50787)); +#50787 = SURFACE_STYLE_FILL_AREA(#50788); +#50788 = FILL_AREA_STYLE('',(#50789)); +#50789 = FILL_AREA_STYLE_COLOUR('',#50655); +#50790 = STYLED_ITEM('color',(#50791),#23682); +#50791 = PRESENTATION_STYLE_ASSIGNMENT((#50792)); +#50792 = SURFACE_STYLE_USAGE(.BOTH.,#50793); +#50793 = SURFACE_SIDE_STYLE('',(#50794)); +#50794 = SURFACE_STYLE_FILL_AREA(#50795); +#50795 = FILL_AREA_STYLE('',(#50796)); +#50796 = FILL_AREA_STYLE_COLOUR('',#50691); +#50797 = STYLED_ITEM('color',(#50798),#23734); +#50798 = PRESENTATION_STYLE_ASSIGNMENT((#50799)); +#50799 = SURFACE_STYLE_USAGE(.BOTH.,#50800); +#50800 = SURFACE_SIDE_STYLE('',(#50801)); +#50801 = SURFACE_STYLE_FILL_AREA(#50802); +#50802 = FILL_AREA_STYLE('',(#50803)); +#50803 = FILL_AREA_STYLE_COLOUR('',#50691); +#50804 = STYLED_ITEM('color',(#50805),#23785); +#50805 = PRESENTATION_STYLE_ASSIGNMENT((#50806)); +#50806 = SURFACE_STYLE_USAGE(.BOTH.,#50807); +#50807 = SURFACE_SIDE_STYLE('',(#50808)); +#50808 = SURFACE_STYLE_FILL_AREA(#50809); +#50809 = FILL_AREA_STYLE('',(#50810)); +#50810 = FILL_AREA_STYLE_COLOUR('',#50691); +#50811 = STYLED_ITEM('color',(#50812),#23915); +#50812 = PRESENTATION_STYLE_ASSIGNMENT((#50813)); +#50813 = SURFACE_STYLE_USAGE(.BOTH.,#50814); +#50814 = SURFACE_SIDE_STYLE('',(#50815)); +#50815 = SURFACE_STYLE_FILL_AREA(#50816); +#50816 = FILL_AREA_STYLE('',(#50817)); +#50817 = FILL_AREA_STYLE_COLOUR('',#50691); +#50818 = STYLED_ITEM('color',(#50819),#23968); +#50819 = PRESENTATION_STYLE_ASSIGNMENT((#50820)); +#50820 = SURFACE_STYLE_USAGE(.BOTH.,#50821); +#50821 = SURFACE_SIDE_STYLE('',(#50822)); +#50822 = SURFACE_STYLE_FILL_AREA(#50823); +#50823 = FILL_AREA_STYLE('',(#50824)); +#50824 = FILL_AREA_STYLE_COLOUR('',#50691); +#50825 = STYLED_ITEM('color',(#50826),#23995); +#50826 = PRESENTATION_STYLE_ASSIGNMENT((#50827)); +#50827 = SURFACE_STYLE_USAGE(.BOTH.,#50828); +#50828 = SURFACE_SIDE_STYLE('',(#50829)); +#50829 = SURFACE_STYLE_FILL_AREA(#50830); +#50830 = FILL_AREA_STYLE('',(#50831)); +#50831 = FILL_AREA_STYLE_COLOUR('',#50691); +#50832 = STYLED_ITEM('color',(#50833),#24043); +#50833 = PRESENTATION_STYLE_ASSIGNMENT((#50834)); +#50834 = SURFACE_STYLE_USAGE(.BOTH.,#50835); +#50835 = SURFACE_SIDE_STYLE('',(#50836)); +#50836 = SURFACE_STYLE_FILL_AREA(#50837); +#50837 = FILL_AREA_STYLE('',(#50838)); +#50838 = FILL_AREA_STYLE_COLOUR('',#50691); +#50839 = STYLED_ITEM('color',(#50840),#24075); +#50840 = PRESENTATION_STYLE_ASSIGNMENT((#50841)); +#50841 = SURFACE_STYLE_USAGE(.BOTH.,#50842); +#50842 = SURFACE_SIDE_STYLE('',(#50843)); +#50843 = SURFACE_STYLE_FILL_AREA(#50844); +#50844 = FILL_AREA_STYLE('',(#50845)); +#50845 = FILL_AREA_STYLE_COLOUR('',#50691); +#50846 = STYLED_ITEM('color',(#50847),#24132); +#50847 = PRESENTATION_STYLE_ASSIGNMENT((#50848)); +#50848 = SURFACE_STYLE_USAGE(.BOTH.,#50849); +#50849 = SURFACE_SIDE_STYLE('',(#50850)); +#50850 = SURFACE_STYLE_FILL_AREA(#50851); +#50851 = FILL_AREA_STYLE('',(#50852)); +#50852 = FILL_AREA_STYLE_COLOUR('',#50691); +#50853 = STYLED_ITEM('color',(#50854),#24178); +#50854 = PRESENTATION_STYLE_ASSIGNMENT((#50855)); +#50855 = SURFACE_STYLE_USAGE(.BOTH.,#50856); +#50856 = SURFACE_SIDE_STYLE('',(#50857)); +#50857 = SURFACE_STYLE_FILL_AREA(#50858); +#50858 = FILL_AREA_STYLE('',(#50859)); +#50859 = FILL_AREA_STYLE_COLOUR('',#50691); +#50860 = STYLED_ITEM('color',(#50861),#24258); +#50861 = PRESENTATION_STYLE_ASSIGNMENT((#50862)); +#50862 = SURFACE_STYLE_USAGE(.BOTH.,#50863); +#50863 = SURFACE_SIDE_STYLE('',(#50864)); +#50864 = SURFACE_STYLE_FILL_AREA(#50865); +#50865 = FILL_AREA_STYLE('',(#50866)); +#50866 = FILL_AREA_STYLE_COLOUR('',#50691); +#50867 = STYLED_ITEM('color',(#50868),#24310); +#50868 = PRESENTATION_STYLE_ASSIGNMENT((#50869)); +#50869 = SURFACE_STYLE_USAGE(.BOTH.,#50870); +#50870 = SURFACE_SIDE_STYLE('',(#50871)); +#50871 = SURFACE_STYLE_FILL_AREA(#50872); +#50872 = FILL_AREA_STYLE('',(#50873)); +#50873 = FILL_AREA_STYLE_COLOUR('',#50691); +#50874 = STYLED_ITEM('color',(#50875),#24356); +#50875 = PRESENTATION_STYLE_ASSIGNMENT((#50876)); +#50876 = SURFACE_STYLE_USAGE(.BOTH.,#50877); +#50877 = SURFACE_SIDE_STYLE('',(#50878)); +#50878 = SURFACE_STYLE_FILL_AREA(#50879); +#50879 = FILL_AREA_STYLE('',(#50880)); +#50880 = FILL_AREA_STYLE_COLOUR('',#50691); +#50881 = STYLED_ITEM('color',(#50882),#24434); +#50882 = PRESENTATION_STYLE_ASSIGNMENT((#50883)); +#50883 = SURFACE_STYLE_USAGE(.BOTH.,#50884); +#50884 = SURFACE_SIDE_STYLE('',(#50885)); +#50885 = SURFACE_STYLE_FILL_AREA(#50886); +#50886 = FILL_AREA_STYLE('',(#50887)); +#50887 = FILL_AREA_STYLE_COLOUR('',#50691); +#50888 = STYLED_ITEM('color',(#50889),#24512); +#50889 = PRESENTATION_STYLE_ASSIGNMENT((#50890)); +#50890 = SURFACE_STYLE_USAGE(.BOTH.,#50891); +#50891 = SURFACE_SIDE_STYLE('',(#50892)); +#50892 = SURFACE_STYLE_FILL_AREA(#50893); +#50893 = FILL_AREA_STYLE('',(#50894)); +#50894 = FILL_AREA_STYLE_COLOUR('',#50655); +#50895 = STYLED_ITEM('color',(#50896),#24598); +#50896 = PRESENTATION_STYLE_ASSIGNMENT((#50897)); +#50897 = SURFACE_STYLE_USAGE(.BOTH.,#50898); +#50898 = SURFACE_SIDE_STYLE('',(#50899)); +#50899 = SURFACE_STYLE_FILL_AREA(#50900); +#50900 = FILL_AREA_STYLE('',(#50901)); +#50901 = FILL_AREA_STYLE_COLOUR('',#50691); +#50902 = STYLED_ITEM('color',(#50903),#24630); +#50903 = PRESENTATION_STYLE_ASSIGNMENT((#50904)); +#50904 = SURFACE_STYLE_USAGE(.BOTH.,#50905); +#50905 = SURFACE_SIDE_STYLE('',(#50906)); +#50906 = SURFACE_STYLE_FILL_AREA(#50907); +#50907 = FILL_AREA_STYLE('',(#50908)); +#50908 = FILL_AREA_STYLE_COLOUR('',#50691); +#50909 = STYLED_ITEM('color',(#50910),#24662); +#50910 = PRESENTATION_STYLE_ASSIGNMENT((#50911)); +#50911 = SURFACE_STYLE_USAGE(.BOTH.,#50912); +#50912 = SURFACE_SIDE_STYLE('',(#50913)); +#50913 = SURFACE_STYLE_FILL_AREA(#50914); +#50914 = FILL_AREA_STYLE('',(#50915)); +#50915 = FILL_AREA_STYLE_COLOUR('',#50691); +#50916 = STYLED_ITEM('color',(#50917),#24714); +#50917 = PRESENTATION_STYLE_ASSIGNMENT((#50918)); +#50918 = SURFACE_STYLE_USAGE(.BOTH.,#50919); +#50919 = SURFACE_SIDE_STYLE('',(#50920)); +#50920 = SURFACE_STYLE_FILL_AREA(#50921); +#50921 = FILL_AREA_STYLE('',(#50922)); +#50922 = FILL_AREA_STYLE_COLOUR('',#50691); +#50923 = STYLED_ITEM('color',(#50924),#24761); +#50924 = PRESENTATION_STYLE_ASSIGNMENT((#50925)); +#50925 = SURFACE_STYLE_USAGE(.BOTH.,#50926); +#50926 = SURFACE_SIDE_STYLE('',(#50927)); +#50927 = SURFACE_STYLE_FILL_AREA(#50928); +#50928 = FILL_AREA_STYLE('',(#50929)); +#50929 = FILL_AREA_STYLE_COLOUR('',#50691); +#50930 = STYLED_ITEM('color',(#50931),#25030); +#50931 = PRESENTATION_STYLE_ASSIGNMENT((#50932)); +#50932 = SURFACE_STYLE_USAGE(.BOTH.,#50933); +#50933 = SURFACE_SIDE_STYLE('',(#50934)); +#50934 = SURFACE_STYLE_FILL_AREA(#50935); +#50935 = FILL_AREA_STYLE('',(#50936)); +#50936 = FILL_AREA_STYLE_COLOUR('',#50691); +#50937 = STYLED_ITEM('color',(#50938),#25056); +#50938 = PRESENTATION_STYLE_ASSIGNMENT((#50939)); +#50939 = SURFACE_STYLE_USAGE(.BOTH.,#50940); +#50940 = SURFACE_SIDE_STYLE('',(#50941)); +#50941 = SURFACE_STYLE_FILL_AREA(#50942); +#50942 = FILL_AREA_STYLE('',(#50943)); +#50943 = FILL_AREA_STYLE_COLOUR('',#50691); +#50944 = STYLED_ITEM('color',(#50945),#25103); +#50945 = PRESENTATION_STYLE_ASSIGNMENT((#50946)); +#50946 = SURFACE_STYLE_USAGE(.BOTH.,#50947); +#50947 = SURFACE_SIDE_STYLE('',(#50948)); +#50948 = SURFACE_STYLE_FILL_AREA(#50949); +#50949 = FILL_AREA_STYLE('',(#50950)); +#50950 = FILL_AREA_STYLE_COLOUR('',#50691); +#50951 = STYLED_ITEM('color',(#50952),#25176); +#50952 = PRESENTATION_STYLE_ASSIGNMENT((#50953)); +#50953 = SURFACE_STYLE_USAGE(.BOTH.,#50954); +#50954 = SURFACE_SIDE_STYLE('',(#50955)); +#50955 = SURFACE_STYLE_FILL_AREA(#50956); +#50956 = FILL_AREA_STYLE('',(#50957)); +#50957 = FILL_AREA_STYLE_COLOUR('',#50655); +#50958 = STYLED_ITEM('color',(#50959),#25405); +#50959 = PRESENTATION_STYLE_ASSIGNMENT((#50960)); +#50960 = SURFACE_STYLE_USAGE(.BOTH.,#50961); +#50961 = SURFACE_SIDE_STYLE('',(#50962)); +#50962 = SURFACE_STYLE_FILL_AREA(#50963); +#50963 = FILL_AREA_STYLE('',(#50964)); +#50964 = FILL_AREA_STYLE_COLOUR('',#50655); +#50965 = STYLED_ITEM('color',(#50966),#25599); +#50966 = PRESENTATION_STYLE_ASSIGNMENT((#50967)); +#50967 = SURFACE_STYLE_USAGE(.BOTH.,#50968); +#50968 = SURFACE_SIDE_STYLE('',(#50969)); +#50969 = SURFACE_STYLE_FILL_AREA(#50970); +#50970 = FILL_AREA_STYLE('',(#50971)); +#50971 = FILL_AREA_STYLE_COLOUR('',#50691); +#50972 = STYLED_ITEM('color',(#50973),#25667); +#50973 = PRESENTATION_STYLE_ASSIGNMENT((#50974)); +#50974 = SURFACE_STYLE_USAGE(.BOTH.,#50975); +#50975 = SURFACE_SIDE_STYLE('',(#50976)); +#50976 = SURFACE_STYLE_FILL_AREA(#50977); +#50977 = FILL_AREA_STYLE('',(#50978)); +#50978 = FILL_AREA_STYLE_COLOUR('',#50655); +#50979 = STYLED_ITEM('color',(#50980),#25694); +#50980 = PRESENTATION_STYLE_ASSIGNMENT((#50981)); +#50981 = SURFACE_STYLE_USAGE(.BOTH.,#50982); +#50982 = SURFACE_SIDE_STYLE('',(#50983)); +#50983 = SURFACE_STYLE_FILL_AREA(#50984); +#50984 = FILL_AREA_STYLE('',(#50985)); +#50985 = FILL_AREA_STYLE_COLOUR('',#50691); +#50986 = STYLED_ITEM('color',(#50987),#25720); +#50987 = PRESENTATION_STYLE_ASSIGNMENT((#50988)); +#50988 = SURFACE_STYLE_USAGE(.BOTH.,#50989); +#50989 = SURFACE_SIDE_STYLE('',(#50990)); +#50990 = SURFACE_STYLE_FILL_AREA(#50991); +#50991 = FILL_AREA_STYLE('',(#50992)); +#50992 = FILL_AREA_STYLE_COLOUR('',#50691); +#50993 = STYLED_ITEM('color',(#50994),#25746); +#50994 = PRESENTATION_STYLE_ASSIGNMENT((#50995)); +#50995 = SURFACE_STYLE_USAGE(.BOTH.,#50996); +#50996 = SURFACE_SIDE_STYLE('',(#50997)); +#50997 = SURFACE_STYLE_FILL_AREA(#50998); +#50998 = FILL_AREA_STYLE('',(#50999)); +#50999 = FILL_AREA_STYLE_COLOUR('',#50691); +#51000 = STYLED_ITEM('color',(#51001),#25772); +#51001 = PRESENTATION_STYLE_ASSIGNMENT((#51002)); +#51002 = SURFACE_STYLE_USAGE(.BOTH.,#51003); +#51003 = SURFACE_SIDE_STYLE('',(#51004)); +#51004 = SURFACE_STYLE_FILL_AREA(#51005); +#51005 = FILL_AREA_STYLE('',(#51006)); +#51006 = FILL_AREA_STYLE_COLOUR('',#50691); +#51007 = STYLED_ITEM('color',(#51008),#25839); +#51008 = PRESENTATION_STYLE_ASSIGNMENT((#51009)); +#51009 = SURFACE_STYLE_USAGE(.BOTH.,#51010); +#51010 = SURFACE_SIDE_STYLE('',(#51011)); +#51011 = SURFACE_STYLE_FILL_AREA(#51012); +#51012 = FILL_AREA_STYLE('',(#51013)); +#51013 = FILL_AREA_STYLE_COLOUR('',#50691); +#51014 = STYLED_ITEM('color',(#51015),#25865); +#51015 = PRESENTATION_STYLE_ASSIGNMENT((#51016)); +#51016 = SURFACE_STYLE_USAGE(.BOTH.,#51017); +#51017 = SURFACE_SIDE_STYLE('',(#51018)); +#51018 = SURFACE_STYLE_FILL_AREA(#51019); +#51019 = FILL_AREA_STYLE('',(#51020)); +#51020 = FILL_AREA_STYLE_COLOUR('',#50691); +#51021 = STYLED_ITEM('color',(#51022),#25872); +#51022 = PRESENTATION_STYLE_ASSIGNMENT((#51023)); +#51023 = SURFACE_STYLE_USAGE(.BOTH.,#51024); +#51024 = SURFACE_SIDE_STYLE('',(#51025)); +#51025 = SURFACE_STYLE_FILL_AREA(#51026); +#51026 = FILL_AREA_STYLE('',(#51027)); +#51027 = FILL_AREA_STYLE_COLOUR('',#50691); +#51028 = STYLED_ITEM('color',(#51029),#25879); +#51029 = PRESENTATION_STYLE_ASSIGNMENT((#51030)); +#51030 = SURFACE_STYLE_USAGE(.BOTH.,#51031); +#51031 = SURFACE_SIDE_STYLE('',(#51032)); +#51032 = SURFACE_STYLE_FILL_AREA(#51033); +#51033 = FILL_AREA_STYLE('',(#51034)); +#51034 = FILL_AREA_STYLE_COLOUR('',#51035); +#51035 = COLOUR_RGB('',0.690196106937,0.662745111292,0.596078458879); +#51036 = STYLED_ITEM('color',(#51037),#25955); +#51037 = PRESENTATION_STYLE_ASSIGNMENT((#51038)); +#51038 = SURFACE_STYLE_USAGE(.BOTH.,#51039); +#51039 = SURFACE_SIDE_STYLE('',(#51040)); +#51040 = SURFACE_STYLE_FILL_AREA(#51041); +#51041 = FILL_AREA_STYLE('',(#51042)); +#51042 = FILL_AREA_STYLE_COLOUR('',#51035); +#51043 = STYLED_ITEM('color',(#51044),#26004); +#51044 = PRESENTATION_STYLE_ASSIGNMENT((#51045)); +#51045 = SURFACE_STYLE_USAGE(.BOTH.,#51046); +#51046 = SURFACE_SIDE_STYLE('',(#51047)); +#51047 = SURFACE_STYLE_FILL_AREA(#51048); +#51048 = FILL_AREA_STYLE('',(#51049)); +#51049 = FILL_AREA_STYLE_COLOUR('',#51035); +#51050 = STYLED_ITEM('color',(#51051),#26053); +#51051 = PRESENTATION_STYLE_ASSIGNMENT((#51052)); +#51052 = SURFACE_STYLE_USAGE(.BOTH.,#51053); +#51053 = SURFACE_SIDE_STYLE('',(#51054)); +#51054 = SURFACE_STYLE_FILL_AREA(#51055); +#51055 = FILL_AREA_STYLE('',(#51056)); +#51056 = FILL_AREA_STYLE_COLOUR('',#51035); +#51057 = STYLED_ITEM('color',(#51058),#26080); +#51058 = PRESENTATION_STYLE_ASSIGNMENT((#51059)); +#51059 = SURFACE_STYLE_USAGE(.BOTH.,#51060); +#51060 = SURFACE_SIDE_STYLE('',(#51061)); +#51061 = SURFACE_STYLE_FILL_AREA(#51062); +#51062 = FILL_AREA_STYLE('',(#51063)); +#51063 = FILL_AREA_STYLE_COLOUR('',#50655); +#51064 = STYLED_ITEM('color',(#51065),#26107); +#51065 = PRESENTATION_STYLE_ASSIGNMENT((#51066)); +#51066 = SURFACE_STYLE_USAGE(.BOTH.,#51067); +#51067 = SURFACE_SIDE_STYLE('',(#51068)); +#51068 = SURFACE_STYLE_FILL_AREA(#51069); +#51069 = FILL_AREA_STYLE('',(#51070)); +#51070 = FILL_AREA_STYLE_COLOUR('',#50655); +#51071 = STYLED_ITEM('color',(#51072),#26134); +#51072 = PRESENTATION_STYLE_ASSIGNMENT((#51073)); +#51073 = SURFACE_STYLE_USAGE(.BOTH.,#51074); +#51074 = SURFACE_SIDE_STYLE('',(#51075)); +#51075 = SURFACE_STYLE_FILL_AREA(#51076); +#51076 = FILL_AREA_STYLE('',(#51077)); +#51077 = FILL_AREA_STYLE_COLOUR('',#50655); +#51078 = STYLED_ITEM('color',(#51079),#26161); +#51079 = PRESENTATION_STYLE_ASSIGNMENT((#51080)); +#51080 = SURFACE_STYLE_USAGE(.BOTH.,#51081); +#51081 = SURFACE_SIDE_STYLE('',(#51082)); +#51082 = SURFACE_STYLE_FILL_AREA(#51083); +#51083 = FILL_AREA_STYLE('',(#51084)); +#51084 = FILL_AREA_STYLE_COLOUR('',#50655); +#51085 = STYLED_ITEM('color',(#51086),#26188); +#51086 = PRESENTATION_STYLE_ASSIGNMENT((#51087)); +#51087 = SURFACE_STYLE_USAGE(.BOTH.,#51088); +#51088 = SURFACE_SIDE_STYLE('',(#51089)); +#51089 = SURFACE_STYLE_FILL_AREA(#51090); +#51090 = FILL_AREA_STYLE('',(#51091)); +#51091 = FILL_AREA_STYLE_COLOUR('',#50655); +#51092 = STYLED_ITEM('color',(#51093),#26215); +#51093 = PRESENTATION_STYLE_ASSIGNMENT((#51094)); +#51094 = SURFACE_STYLE_USAGE(.BOTH.,#51095); +#51095 = SURFACE_SIDE_STYLE('',(#51096)); +#51096 = SURFACE_STYLE_FILL_AREA(#51097); +#51097 = FILL_AREA_STYLE('',(#51098)); +#51098 = FILL_AREA_STYLE_COLOUR('',#50655); +#51099 = STYLED_ITEM('color',(#51100),#26242); +#51100 = PRESENTATION_STYLE_ASSIGNMENT((#51101)); +#51101 = SURFACE_STYLE_USAGE(.BOTH.,#51102); +#51102 = SURFACE_SIDE_STYLE('',(#51103)); +#51103 = SURFACE_STYLE_FILL_AREA(#51104); +#51104 = FILL_AREA_STYLE('',(#51105)); +#51105 = FILL_AREA_STYLE_COLOUR('',#50655); +#51106 = STYLED_ITEM('color',(#51107),#26269); +#51107 = PRESENTATION_STYLE_ASSIGNMENT((#51108)); +#51108 = SURFACE_STYLE_USAGE(.BOTH.,#51109); +#51109 = SURFACE_SIDE_STYLE('',(#51110)); +#51110 = SURFACE_STYLE_FILL_AREA(#51111); +#51111 = FILL_AREA_STYLE('',(#51112)); +#51112 = FILL_AREA_STYLE_COLOUR('',#50655); +#51113 = STYLED_ITEM('color',(#51114),#26276); +#51114 = PRESENTATION_STYLE_ASSIGNMENT((#51115)); +#51115 = SURFACE_STYLE_USAGE(.BOTH.,#51116); +#51116 = SURFACE_SIDE_STYLE('',(#51117)); +#51117 = SURFACE_STYLE_FILL_AREA(#51118); +#51118 = FILL_AREA_STYLE('',(#51119)); +#51119 = FILL_AREA_STYLE_COLOUR('',#51035); +#51120 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #51121,#51129),#50627); +#51121 = STYLED_ITEM('color',(#51122),#40617); +#51122 = PRESENTATION_STYLE_ASSIGNMENT((#51123)); +#51123 = SURFACE_STYLE_USAGE(.BOTH.,#51124); +#51124 = SURFACE_SIDE_STYLE('',(#51125)); +#51125 = SURFACE_STYLE_FILL_AREA(#51126); +#51126 = FILL_AREA_STYLE('',(#51127)); +#51127 = FILL_AREA_STYLE_COLOUR('',#51128); +#51128 = COLOUR_RGB('',0.313304153717,0.484529207832,0.410020903123); +#51129 = OVER_RIDING_STYLED_ITEM('overriding color',(#51130),#40617, + #51121); +#51130 = PRESENTATION_STYLE_BY_CONTEXT((#51131),#50646); +#51131 = SURFACE_STYLE_USAGE(.BOTH.,#51132); +#51132 = SURFACE_SIDE_STYLE('',(#51133)); +#51133 = SURFACE_STYLE_FILL_AREA(#51134); +#51134 = FILL_AREA_STYLE('',(#51135)); +#51135 = FILL_AREA_STYLE_COLOUR('',#51136); +#51136 = COLOUR_RGB('',0.313304153717,0.484529207832,0.410020903123); +#51137 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #51138,#51146,#51153,#51160,#51168,#51175,#51182,#51189,#51196, + #51203,#51210,#51217,#51224,#51231,#51238,#51245,#51252,#51259, + #51266,#51273,#51280,#51287,#51294,#51301,#51308,#51315,#51322, + #51329,#51336,#51343,#51350,#51357,#51364,#51371,#51378,#51385, + #51392,#51399,#51406,#51413,#51420),#29441); +#51138 = STYLED_ITEM('color',(#51139),#26327); +#51139 = PRESENTATION_STYLE_ASSIGNMENT((#51140)); +#51140 = SURFACE_STYLE_USAGE(.BOTH.,#51141); +#51141 = SURFACE_SIDE_STYLE('',(#51142)); +#51142 = SURFACE_STYLE_FILL_AREA(#51143); +#51143 = FILL_AREA_STYLE('',(#51144)); +#51144 = FILL_AREA_STYLE_COLOUR('',#51145); +#51145 = COLOUR_RGB('',0.823999987314,0.819999987296,0.781000009244); +#51146 = STYLED_ITEM('color',(#51147),#26485); +#51147 = PRESENTATION_STYLE_ASSIGNMENT((#51148)); +#51148 = SURFACE_STYLE_USAGE(.BOTH.,#51149); +#51149 = SURFACE_SIDE_STYLE('',(#51150)); +#51150 = SURFACE_STYLE_FILL_AREA(#51151); +#51151 = FILL_AREA_STYLE('',(#51152)); +#51152 = FILL_AREA_STYLE_COLOUR('',#51145); +#51153 = STYLED_ITEM('color',(#51154),#26545); +#51154 = PRESENTATION_STYLE_ASSIGNMENT((#51155)); +#51155 = SURFACE_STYLE_USAGE(.BOTH.,#51156); +#51156 = SURFACE_SIDE_STYLE('',(#51157)); +#51157 = SURFACE_STYLE_FILL_AREA(#51158); +#51158 = FILL_AREA_STYLE('',(#51159)); +#51159 = FILL_AREA_STYLE_COLOUR('',#51145); +#51160 = STYLED_ITEM('color',(#51161),#26636); +#51161 = PRESENTATION_STYLE_ASSIGNMENT((#51162)); +#51162 = SURFACE_STYLE_USAGE(.BOTH.,#51163); +#51163 = SURFACE_SIDE_STYLE('',(#51164)); +#51164 = SURFACE_STYLE_FILL_AREA(#51165); +#51165 = FILL_AREA_STYLE('',(#51166)); +#51166 = FILL_AREA_STYLE_COLOUR('',#51167); +#51167 = COLOUR_RGB('',0.147999998088,0.144999993226,0.144999993226); +#51168 = STYLED_ITEM('color',(#51169),#26870); +#51169 = PRESENTATION_STYLE_ASSIGNMENT((#51170)); +#51170 = SURFACE_STYLE_USAGE(.BOTH.,#51171); +#51171 = SURFACE_SIDE_STYLE('',(#51172)); +#51172 = SURFACE_STYLE_FILL_AREA(#51173); +#51173 = FILL_AREA_STYLE('',(#51174)); +#51174 = FILL_AREA_STYLE_COLOUR('',#51145); +#51175 = STYLED_ITEM('color',(#51176),#26996); +#51176 = PRESENTATION_STYLE_ASSIGNMENT((#51177)); +#51177 = SURFACE_STYLE_USAGE(.BOTH.,#51178); +#51178 = SURFACE_SIDE_STYLE('',(#51179)); +#51179 = SURFACE_STYLE_FILL_AREA(#51180); +#51180 = FILL_AREA_STYLE('',(#51181)); +#51181 = FILL_AREA_STYLE_COLOUR('',#51167); +#51182 = STYLED_ITEM('color',(#51183),#27235); +#51183 = PRESENTATION_STYLE_ASSIGNMENT((#51184)); +#51184 = SURFACE_STYLE_USAGE(.BOTH.,#51185); +#51185 = SURFACE_SIDE_STYLE('',(#51186)); +#51186 = SURFACE_STYLE_FILL_AREA(#51187); +#51187 = FILL_AREA_STYLE('',(#51188)); +#51188 = FILL_AREA_STYLE_COLOUR('',#51167); +#51189 = STYLED_ITEM('color',(#51190),#27289); +#51190 = PRESENTATION_STYLE_ASSIGNMENT((#51191)); +#51191 = SURFACE_STYLE_USAGE(.BOTH.,#51192); +#51192 = SURFACE_SIDE_STYLE('',(#51193)); +#51193 = SURFACE_STYLE_FILL_AREA(#51194); +#51194 = FILL_AREA_STYLE('',(#51195)); +#51195 = FILL_AREA_STYLE_COLOUR('',#51167); +#51196 = STYLED_ITEM('color',(#51197),#27343); +#51197 = PRESENTATION_STYLE_ASSIGNMENT((#51198)); +#51198 = SURFACE_STYLE_USAGE(.BOTH.,#51199); +#51199 = SURFACE_SIDE_STYLE('',(#51200)); +#51200 = SURFACE_STYLE_FILL_AREA(#51201); +#51201 = FILL_AREA_STYLE('',(#51202)); +#51202 = FILL_AREA_STYLE_COLOUR('',#51167); +#51203 = STYLED_ITEM('color',(#51204),#27494); +#51204 = PRESENTATION_STYLE_ASSIGNMENT((#51205)); +#51205 = SURFACE_STYLE_USAGE(.BOTH.,#51206); +#51206 = SURFACE_SIDE_STYLE('',(#51207)); +#51207 = SURFACE_STYLE_FILL_AREA(#51208); +#51208 = FILL_AREA_STYLE('',(#51209)); +#51209 = FILL_AREA_STYLE_COLOUR('',#51167); +#51210 = STYLED_ITEM('color',(#51211),#27645); +#51211 = PRESENTATION_STYLE_ASSIGNMENT((#51212)); +#51212 = SURFACE_STYLE_USAGE(.BOTH.,#51213); +#51213 = SURFACE_SIDE_STYLE('',(#51214)); +#51214 = SURFACE_STYLE_FILL_AREA(#51215); +#51215 = FILL_AREA_STYLE('',(#51216)); +#51216 = FILL_AREA_STYLE_COLOUR('',#51167); +#51217 = STYLED_ITEM('color',(#51218),#27695); +#51218 = PRESENTATION_STYLE_ASSIGNMENT((#51219)); +#51219 = SURFACE_STYLE_USAGE(.BOTH.,#51220); +#51220 = SURFACE_SIDE_STYLE('',(#51221)); +#51221 = SURFACE_STYLE_FILL_AREA(#51222); +#51222 = FILL_AREA_STYLE('',(#51223)); +#51223 = FILL_AREA_STYLE_COLOUR('',#51167); +#51224 = STYLED_ITEM('color',(#51225),#27745); +#51225 = PRESENTATION_STYLE_ASSIGNMENT((#51226)); +#51226 = SURFACE_STYLE_USAGE(.BOTH.,#51227); +#51227 = SURFACE_SIDE_STYLE('',(#51228)); +#51228 = SURFACE_STYLE_FILL_AREA(#51229); +#51229 = FILL_AREA_STYLE('',(#51230)); +#51230 = FILL_AREA_STYLE_COLOUR('',#51167); +#51231 = STYLED_ITEM('color',(#51232),#27915); +#51232 = PRESENTATION_STYLE_ASSIGNMENT((#51233)); +#51233 = SURFACE_STYLE_USAGE(.BOTH.,#51234); +#51234 = SURFACE_SIDE_STYLE('',(#51235)); +#51235 = SURFACE_STYLE_FILL_AREA(#51236); +#51236 = FILL_AREA_STYLE('',(#51237)); +#51237 = FILL_AREA_STYLE_COLOUR('',#51145); +#51238 = STYLED_ITEM('color',(#51239),#28002); +#51239 = PRESENTATION_STYLE_ASSIGNMENT((#51240)); +#51240 = SURFACE_STYLE_USAGE(.BOTH.,#51241); +#51241 = SURFACE_SIDE_STYLE('',(#51242)); +#51242 = SURFACE_STYLE_FILL_AREA(#51243); +#51243 = FILL_AREA_STYLE('',(#51244)); +#51244 = FILL_AREA_STYLE_COLOUR('',#51167); +#51245 = STYLED_ITEM('color',(#51246),#28271); +#51246 = PRESENTATION_STYLE_ASSIGNMENT((#51247)); +#51247 = SURFACE_STYLE_USAGE(.BOTH.,#51248); +#51248 = SURFACE_SIDE_STYLE('',(#51249)); +#51249 = SURFACE_STYLE_FILL_AREA(#51250); +#51250 = FILL_AREA_STYLE('',(#51251)); +#51251 = FILL_AREA_STYLE_COLOUR('',#51167); +#51252 = STYLED_ITEM('color',(#51253),#28298); +#51253 = PRESENTATION_STYLE_ASSIGNMENT((#51254)); +#51254 = SURFACE_STYLE_USAGE(.BOTH.,#51255); +#51255 = SURFACE_SIDE_STYLE('',(#51256)); +#51256 = SURFACE_STYLE_FILL_AREA(#51257); +#51257 = FILL_AREA_STYLE('',(#51258)); +#51258 = FILL_AREA_STYLE_COLOUR('',#51145); +#51259 = STYLED_ITEM('color',(#51260),#28374); +#51260 = PRESENTATION_STYLE_ASSIGNMENT((#51261)); +#51261 = SURFACE_STYLE_USAGE(.BOTH.,#51262); +#51262 = SURFACE_SIDE_STYLE('',(#51263)); +#51263 = SURFACE_STYLE_FILL_AREA(#51264); +#51264 = FILL_AREA_STYLE('',(#51265)); +#51265 = FILL_AREA_STYLE_COLOUR('',#51167); +#51266 = STYLED_ITEM('color',(#51267),#28381); +#51267 = PRESENTATION_STYLE_ASSIGNMENT((#51268)); +#51268 = SURFACE_STYLE_USAGE(.BOTH.,#51269); +#51269 = SURFACE_SIDE_STYLE('',(#51270)); +#51270 = SURFACE_STYLE_FILL_AREA(#51271); +#51271 = FILL_AREA_STYLE('',(#51272)); +#51272 = FILL_AREA_STYLE_COLOUR('',#51167); +#51273 = STYLED_ITEM('color',(#51274),#28408); +#51274 = PRESENTATION_STYLE_ASSIGNMENT((#51275)); +#51275 = SURFACE_STYLE_USAGE(.BOTH.,#51276); +#51276 = SURFACE_SIDE_STYLE('',(#51277)); +#51277 = SURFACE_STYLE_FILL_AREA(#51278); +#51278 = FILL_AREA_STYLE('',(#51279)); +#51279 = FILL_AREA_STYLE_COLOUR('',#51167); +#51280 = STYLED_ITEM('color',(#51281),#28415); +#51281 = PRESENTATION_STYLE_ASSIGNMENT((#51282)); +#51282 = SURFACE_STYLE_USAGE(.BOTH.,#51283); +#51283 = SURFACE_SIDE_STYLE('',(#51284)); +#51284 = SURFACE_STYLE_FILL_AREA(#51285); +#51285 = FILL_AREA_STYLE('',(#51286)); +#51286 = FILL_AREA_STYLE_COLOUR('',#51167); +#51287 = STYLED_ITEM('color',(#51288),#28447); +#51288 = PRESENTATION_STYLE_ASSIGNMENT((#51289)); +#51289 = SURFACE_STYLE_USAGE(.BOTH.,#51290); +#51290 = SURFACE_SIDE_STYLE('',(#51291)); +#51291 = SURFACE_STYLE_FILL_AREA(#51292); +#51292 = FILL_AREA_STYLE('',(#51293)); +#51293 = FILL_AREA_STYLE_COLOUR('',#51167); +#51294 = STYLED_ITEM('color',(#51295),#28454); +#51295 = PRESENTATION_STYLE_ASSIGNMENT((#51296)); +#51296 = SURFACE_STYLE_USAGE(.BOTH.,#51297); +#51297 = SURFACE_SIDE_STYLE('',(#51298)); +#51298 = SURFACE_STYLE_FILL_AREA(#51299); +#51299 = FILL_AREA_STYLE('',(#51300)); +#51300 = FILL_AREA_STYLE_COLOUR('',#51167); +#51301 = STYLED_ITEM('color',(#51302),#28486); +#51302 = PRESENTATION_STYLE_ASSIGNMENT((#51303)); +#51303 = SURFACE_STYLE_USAGE(.BOTH.,#51304); +#51304 = SURFACE_SIDE_STYLE('',(#51305)); +#51305 = SURFACE_STYLE_FILL_AREA(#51306); +#51306 = FILL_AREA_STYLE('',(#51307)); +#51307 = FILL_AREA_STYLE_COLOUR('',#51167); +#51308 = STYLED_ITEM('color',(#51309),#28493); +#51309 = PRESENTATION_STYLE_ASSIGNMENT((#51310)); +#51310 = SURFACE_STYLE_USAGE(.BOTH.,#51311); +#51311 = SURFACE_SIDE_STYLE('',(#51312)); +#51312 = SURFACE_STYLE_FILL_AREA(#51313); +#51313 = FILL_AREA_STYLE('',(#51314)); +#51314 = FILL_AREA_STYLE_COLOUR('',#51145); +#51315 = STYLED_ITEM('color',(#51316),#28569); +#51316 = PRESENTATION_STYLE_ASSIGNMENT((#51317)); +#51317 = SURFACE_STYLE_USAGE(.BOTH.,#51318); +#51318 = SURFACE_SIDE_STYLE('',(#51319)); +#51319 = SURFACE_STYLE_FILL_AREA(#51320); +#51320 = FILL_AREA_STYLE('',(#51321)); +#51321 = FILL_AREA_STYLE_COLOUR('',#51145); +#51322 = STYLED_ITEM('color',(#51323),#28706); +#51323 = PRESENTATION_STYLE_ASSIGNMENT((#51324)); +#51324 = SURFACE_STYLE_USAGE(.BOTH.,#51325); +#51325 = SURFACE_SIDE_STYLE('',(#51326)); +#51326 = SURFACE_STYLE_FILL_AREA(#51327); +#51327 = FILL_AREA_STYLE('',(#51328)); +#51328 = FILL_AREA_STYLE_COLOUR('',#51145); +#51329 = STYLED_ITEM('color',(#51330),#28783); +#51330 = PRESENTATION_STYLE_ASSIGNMENT((#51331)); +#51331 = SURFACE_STYLE_USAGE(.BOTH.,#51332); +#51332 = SURFACE_SIDE_STYLE('',(#51333)); +#51333 = SURFACE_STYLE_FILL_AREA(#51334); +#51334 = FILL_AREA_STYLE('',(#51335)); +#51335 = FILL_AREA_STYLE_COLOUR('',#51145); +#51336 = STYLED_ITEM('color',(#51337),#28833); +#51337 = PRESENTATION_STYLE_ASSIGNMENT((#51338)); +#51338 = SURFACE_STYLE_USAGE(.BOTH.,#51339); +#51339 = SURFACE_SIDE_STYLE('',(#51340)); +#51340 = SURFACE_STYLE_FILL_AREA(#51341); +#51341 = FILL_AREA_STYLE('',(#51342)); +#51342 = FILL_AREA_STYLE_COLOUR('',#51145); +#51343 = STYLED_ITEM('color',(#51344),#28883); +#51344 = PRESENTATION_STYLE_ASSIGNMENT((#51345)); +#51345 = SURFACE_STYLE_USAGE(.BOTH.,#51346); +#51346 = SURFACE_SIDE_STYLE('',(#51347)); +#51347 = SURFACE_STYLE_FILL_AREA(#51348); +#51348 = FILL_AREA_STYLE('',(#51349)); +#51349 = FILL_AREA_STYLE_COLOUR('',#51145); +#51350 = STYLED_ITEM('color',(#51351),#28960); +#51351 = PRESENTATION_STYLE_ASSIGNMENT((#51352)); +#51352 = SURFACE_STYLE_USAGE(.BOTH.,#51353); +#51353 = SURFACE_SIDE_STYLE('',(#51354)); +#51354 = SURFACE_STYLE_FILL_AREA(#51355); +#51355 = FILL_AREA_STYLE('',(#51356)); +#51356 = FILL_AREA_STYLE_COLOUR('',#51145); +#51357 = STYLED_ITEM('color',(#51358),#29010); +#51358 = PRESENTATION_STYLE_ASSIGNMENT((#51359)); +#51359 = SURFACE_STYLE_USAGE(.BOTH.,#51360); +#51360 = SURFACE_SIDE_STYLE('',(#51361)); +#51361 = SURFACE_STYLE_FILL_AREA(#51362); +#51362 = FILL_AREA_STYLE('',(#51363)); +#51363 = FILL_AREA_STYLE_COLOUR('',#51145); +#51364 = STYLED_ITEM('color',(#51365),#29060); +#51365 = PRESENTATION_STYLE_ASSIGNMENT((#51366)); +#51366 = SURFACE_STYLE_USAGE(.BOTH.,#51367); +#51367 = SURFACE_SIDE_STYLE('',(#51368)); +#51368 = SURFACE_STYLE_FILL_AREA(#51369); +#51369 = FILL_AREA_STYLE('',(#51370)); +#51370 = FILL_AREA_STYLE_COLOUR('',#51145); +#51371 = STYLED_ITEM('color',(#51372),#29087); +#51372 = PRESENTATION_STYLE_ASSIGNMENT((#51373)); +#51373 = SURFACE_STYLE_USAGE(.BOTH.,#51374); +#51374 = SURFACE_SIDE_STYLE('',(#51375)); +#51375 = SURFACE_STYLE_FILL_AREA(#51376); +#51376 = FILL_AREA_STYLE('',(#51377)); +#51377 = FILL_AREA_STYLE_COLOUR('',#51145); +#51378 = STYLED_ITEM('color',(#51379),#29114); +#51379 = PRESENTATION_STYLE_ASSIGNMENT((#51380)); +#51380 = SURFACE_STYLE_USAGE(.BOTH.,#51381); +#51381 = SURFACE_SIDE_STYLE('',(#51382)); +#51382 = SURFACE_STYLE_FILL_AREA(#51383); +#51383 = FILL_AREA_STYLE('',(#51384)); +#51384 = FILL_AREA_STYLE_COLOUR('',#51145); +#51385 = STYLED_ITEM('color',(#51386),#29250); +#51386 = PRESENTATION_STYLE_ASSIGNMENT((#51387)); +#51387 = SURFACE_STYLE_USAGE(.BOTH.,#51388); +#51388 = SURFACE_SIDE_STYLE('',(#51389)); +#51389 = SURFACE_STYLE_FILL_AREA(#51390); +#51390 = FILL_AREA_STYLE('',(#51391)); +#51391 = FILL_AREA_STYLE_COLOUR('',#51167); +#51392 = STYLED_ITEM('color',(#51393),#29368); +#51393 = PRESENTATION_STYLE_ASSIGNMENT((#51394)); +#51394 = SURFACE_STYLE_USAGE(.BOTH.,#51395); +#51395 = SURFACE_SIDE_STYLE('',(#51396)); +#51396 = SURFACE_STYLE_FILL_AREA(#51397); +#51397 = FILL_AREA_STYLE('',(#51398)); +#51398 = FILL_AREA_STYLE_COLOUR('',#51145); +#51399 = STYLED_ITEM('color',(#51400),#29396); +#51400 = PRESENTATION_STYLE_ASSIGNMENT((#51401)); +#51401 = SURFACE_STYLE_USAGE(.BOTH.,#51402); +#51402 = SURFACE_SIDE_STYLE('',(#51403)); +#51403 = SURFACE_STYLE_FILL_AREA(#51404); +#51404 = FILL_AREA_STYLE('',(#51405)); +#51405 = FILL_AREA_STYLE_COLOUR('',#51145); +#51406 = STYLED_ITEM('color',(#51407),#29403); +#51407 = PRESENTATION_STYLE_ASSIGNMENT((#51408)); +#51408 = SURFACE_STYLE_USAGE(.BOTH.,#51409); +#51409 = SURFACE_SIDE_STYLE('',(#51410)); +#51410 = SURFACE_STYLE_FILL_AREA(#51411); +#51411 = FILL_AREA_STYLE('',(#51412)); +#51412 = FILL_AREA_STYLE_COLOUR('',#51145); +#51413 = STYLED_ITEM('color',(#51414),#29410); +#51414 = PRESENTATION_STYLE_ASSIGNMENT((#51415)); +#51415 = SURFACE_STYLE_USAGE(.BOTH.,#51416); +#51416 = SURFACE_SIDE_STYLE('',(#51417)); +#51417 = SURFACE_STYLE_FILL_AREA(#51418); +#51418 = FILL_AREA_STYLE('',(#51419)); +#51419 = FILL_AREA_STYLE_COLOUR('',#51145); +#51420 = STYLED_ITEM('color',(#51421),#29436); +#51421 = PRESENTATION_STYLE_ASSIGNMENT((#51422)); +#51422 = SURFACE_STYLE_USAGE(.BOTH.,#51423); +#51423 = SURFACE_SIDE_STYLE('',(#51424)); +#51424 = SURFACE_STYLE_FILL_AREA(#51425); +#51425 = FILL_AREA_STYLE('',(#51426)); +#51426 = FILL_AREA_STYLE_COLOUR('',#51167); +#51427 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #51428,#51436,#51443,#51450,#51458,#51465,#51472,#51479,#51486, + #51493,#51500,#51507,#51514),#20199); +#51428 = STYLED_ITEM('color',(#51429),#19615); +#51429 = PRESENTATION_STYLE_ASSIGNMENT((#51430)); +#51430 = SURFACE_STYLE_USAGE(.BOTH.,#51431); +#51431 = SURFACE_SIDE_STYLE('',(#51432)); +#51432 = SURFACE_STYLE_FILL_AREA(#51433); +#51433 = FILL_AREA_STYLE('',(#51434)); +#51434 = FILL_AREA_STYLE_COLOUR('',#51435); +#51435 = DRAUGHTING_PRE_DEFINED_COLOUR('blue'); +#51436 = STYLED_ITEM('color',(#51437),#19707); +#51437 = PRESENTATION_STYLE_ASSIGNMENT((#51438)); +#51438 = SURFACE_STYLE_USAGE(.BOTH.,#51439); +#51439 = SURFACE_SIDE_STYLE('',(#51440)); +#51440 = SURFACE_STYLE_FILL_AREA(#51441); +#51441 = FILL_AREA_STYLE('',(#51442)); +#51442 = FILL_AREA_STYLE_COLOUR('',#51435); +#51443 = STYLED_ITEM('color',(#51444),#19746); +#51444 = PRESENTATION_STYLE_ASSIGNMENT((#51445)); +#51445 = SURFACE_STYLE_USAGE(.BOTH.,#51446); +#51446 = SURFACE_SIDE_STYLE('',(#51447)); +#51447 = SURFACE_STYLE_FILL_AREA(#51448); +#51448 = FILL_AREA_STYLE('',(#51449)); +#51449 = FILL_AREA_STYLE_COLOUR('',#51435); +#51450 = STYLED_ITEM('color',(#51451),#19781); +#51451 = PRESENTATION_STYLE_ASSIGNMENT((#51452)); +#51452 = SURFACE_STYLE_USAGE(.BOTH.,#51453); +#51453 = SURFACE_SIDE_STYLE('',(#51454)); +#51454 = SURFACE_STYLE_FILL_AREA(#51455); +#51455 = FILL_AREA_STYLE('',(#51456)); +#51456 = FILL_AREA_STYLE_COLOUR('',#51457); +#51457 = COLOUR_RGB('',0.699999984889,9.999999991362E-02, + 5.000000142576E-02); +#51458 = STYLED_ITEM('color',(#51459),#19836); +#51459 = PRESENTATION_STYLE_ASSIGNMENT((#51460)); +#51460 = SURFACE_STYLE_USAGE(.BOTH.,#51461); +#51461 = SURFACE_SIDE_STYLE('',(#51462)); +#51462 = SURFACE_STYLE_FILL_AREA(#51463); +#51463 = FILL_AREA_STYLE('',(#51464)); +#51464 = FILL_AREA_STYLE_COLOUR('',#51457); +#51465 = STYLED_ITEM('color',(#51466),#19891); +#51466 = PRESENTATION_STYLE_ASSIGNMENT((#51467)); +#51467 = SURFACE_STYLE_USAGE(.BOTH.,#51468); +#51468 = SURFACE_SIDE_STYLE('',(#51469)); +#51469 = SURFACE_STYLE_FILL_AREA(#51470); +#51470 = FILL_AREA_STYLE('',(#51471)); +#51471 = FILL_AREA_STYLE_COLOUR('',#51145); +#51472 = STYLED_ITEM('color',(#51473),#19926); +#51473 = PRESENTATION_STYLE_ASSIGNMENT((#51474)); +#51474 = SURFACE_STYLE_USAGE(.BOTH.,#51475); +#51475 = SURFACE_SIDE_STYLE('',(#51476)); +#51476 = SURFACE_STYLE_FILL_AREA(#51477); +#51477 = FILL_AREA_STYLE('',(#51478)); +#51478 = FILL_AREA_STYLE_COLOUR('',#51145); +#51479 = STYLED_ITEM('color',(#51480),#19961); +#51480 = PRESENTATION_STYLE_ASSIGNMENT((#51481)); +#51481 = SURFACE_STYLE_USAGE(.BOTH.,#51482); +#51482 = SURFACE_SIDE_STYLE('',(#51483)); +#51483 = SURFACE_STYLE_FILL_AREA(#51484); +#51484 = FILL_AREA_STYLE('',(#51485)); +#51485 = FILL_AREA_STYLE_COLOUR('',#51145); +#51486 = STYLED_ITEM('color',(#51487),#20020); +#51487 = PRESENTATION_STYLE_ASSIGNMENT((#51488)); +#51488 = SURFACE_STYLE_USAGE(.BOTH.,#51489); +#51489 = SURFACE_SIDE_STYLE('',(#51490)); +#51490 = SURFACE_STYLE_FILL_AREA(#51491); +#51491 = FILL_AREA_STYLE('',(#51492)); +#51492 = FILL_AREA_STYLE_COLOUR('',#51145); +#51493 = STYLED_ITEM('color',(#51494),#20079); +#51494 = PRESENTATION_STYLE_ASSIGNMENT((#51495)); +#51495 = SURFACE_STYLE_USAGE(.BOTH.,#51496); +#51496 = SURFACE_SIDE_STYLE('',(#51497)); +#51497 = SURFACE_STYLE_FILL_AREA(#51498); +#51498 = FILL_AREA_STYLE('',(#51499)); +#51499 = FILL_AREA_STYLE_COLOUR('',#51145); +#51500 = STYLED_ITEM('color',(#51501),#20135); +#51501 = PRESENTATION_STYLE_ASSIGNMENT((#51502)); +#51502 = SURFACE_STYLE_USAGE(.BOTH.,#51503); +#51503 = SURFACE_SIDE_STYLE('',(#51504)); +#51504 = SURFACE_STYLE_FILL_AREA(#51505); +#51505 = FILL_AREA_STYLE('',(#51506)); +#51506 = FILL_AREA_STYLE_COLOUR('',#51145); +#51507 = STYLED_ITEM('color',(#51508),#20191); +#51508 = PRESENTATION_STYLE_ASSIGNMENT((#51509)); +#51509 = SURFACE_STYLE_USAGE(.BOTH.,#51510); +#51510 = SURFACE_SIDE_STYLE('',(#51511)); +#51511 = SURFACE_STYLE_FILL_AREA(#51512); +#51512 = FILL_AREA_STYLE('',(#51513)); +#51513 = FILL_AREA_STYLE_COLOUR('',#51145); +#51514 = STYLED_ITEM('color',(#51515),#20195); +#51515 = PRESENTATION_STYLE_ASSIGNMENT((#51516)); +#51516 = SURFACE_STYLE_USAGE(.BOTH.,#51517); +#51517 = SURFACE_SIDE_STYLE('',(#51518)); +#51518 = SURFACE_STYLE_FILL_AREA(#51519); +#51519 = FILL_AREA_STYLE('',(#51520)); +#51520 = FILL_AREA_STYLE_COLOUR('',#51145); +#51521 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #51522,#51529,#51536,#51543,#51550,#51557,#51564,#51571,#51578, + #51585,#51592,#51600,#51607,#51614,#51621,#51628,#51635,#51642, + #51649,#51656,#51663,#51670,#51677,#51684,#51691,#51698,#51705, + #51712),#2233); +#51522 = STYLED_ITEM('color',(#51523),#253); +#51523 = PRESENTATION_STYLE_ASSIGNMENT((#51524)); +#51524 = SURFACE_STYLE_USAGE(.BOTH.,#51525); +#51525 = SURFACE_SIDE_STYLE('',(#51526)); +#51526 = SURFACE_STYLE_FILL_AREA(#51527); +#51527 = FILL_AREA_STYLE('',(#51528)); +#51528 = FILL_AREA_STYLE_COLOUR('',#51145); +#51529 = STYLED_ITEM('color',(#51530),#497); +#51530 = PRESENTATION_STYLE_ASSIGNMENT((#51531)); +#51531 = SURFACE_STYLE_USAGE(.BOTH.,#51532); +#51532 = SURFACE_SIDE_STYLE('',(#51533)); +#51533 = SURFACE_STYLE_FILL_AREA(#51534); +#51534 = FILL_AREA_STYLE('',(#51535)); +#51535 = FILL_AREA_STYLE_COLOUR('',#51145); +#51536 = STYLED_ITEM('color',(#51537),#573); +#51537 = PRESENTATION_STYLE_ASSIGNMENT((#51538)); +#51538 = SURFACE_STYLE_USAGE(.BOTH.,#51539); +#51539 = SURFACE_SIDE_STYLE('',(#51540)); +#51540 = SURFACE_STYLE_FILL_AREA(#51541); +#51541 = FILL_AREA_STYLE('',(#51542)); +#51542 = FILL_AREA_STYLE_COLOUR('',#51145); +#51543 = STYLED_ITEM('color',(#51544),#623); +#51544 = PRESENTATION_STYLE_ASSIGNMENT((#51545)); +#51545 = SURFACE_STYLE_USAGE(.BOTH.,#51546); +#51546 = SURFACE_SIDE_STYLE('',(#51547)); +#51547 = SURFACE_STYLE_FILL_AREA(#51548); +#51548 = FILL_AREA_STYLE('',(#51549)); +#51549 = FILL_AREA_STYLE_COLOUR('',#51145); +#51550 = STYLED_ITEM('color',(#51551),#677); +#51551 = PRESENTATION_STYLE_ASSIGNMENT((#51552)); +#51552 = SURFACE_STYLE_USAGE(.BOTH.,#51553); +#51553 = SURFACE_SIDE_STYLE('',(#51554)); +#51554 = SURFACE_STYLE_FILL_AREA(#51555); +#51555 = FILL_AREA_STYLE('',(#51556)); +#51556 = FILL_AREA_STYLE_COLOUR('',#51145); +#51557 = STYLED_ITEM('color',(#51558),#726); +#51558 = PRESENTATION_STYLE_ASSIGNMENT((#51559)); +#51559 = SURFACE_STYLE_USAGE(.BOTH.,#51560); +#51560 = SURFACE_SIDE_STYLE('',(#51561)); +#51561 = SURFACE_STYLE_FILL_AREA(#51562); +#51562 = FILL_AREA_STYLE('',(#51563)); +#51563 = FILL_AREA_STYLE_COLOUR('',#51145); +#51564 = STYLED_ITEM('color',(#51565),#775); +#51565 = PRESENTATION_STYLE_ASSIGNMENT((#51566)); +#51566 = SURFACE_STYLE_USAGE(.BOTH.,#51567); +#51567 = SURFACE_SIDE_STYLE('',(#51568)); +#51568 = SURFACE_STYLE_FILL_AREA(#51569); +#51569 = FILL_AREA_STYLE('',(#51570)); +#51570 = FILL_AREA_STYLE_COLOUR('',#51145); +#51571 = STYLED_ITEM('color',(#51572),#829); +#51572 = PRESENTATION_STYLE_ASSIGNMENT((#51573)); +#51573 = SURFACE_STYLE_USAGE(.BOTH.,#51574); +#51574 = SURFACE_SIDE_STYLE('',(#51575)); +#51575 = SURFACE_STYLE_FILL_AREA(#51576); +#51576 = FILL_AREA_STYLE('',(#51577)); +#51577 = FILL_AREA_STYLE_COLOUR('',#51145); +#51578 = STYLED_ITEM('color',(#51579),#879); +#51579 = PRESENTATION_STYLE_ASSIGNMENT((#51580)); +#51580 = SURFACE_STYLE_USAGE(.BOTH.,#51581); +#51581 = SURFACE_SIDE_STYLE('',(#51582)); +#51582 = SURFACE_STYLE_FILL_AREA(#51583); +#51583 = FILL_AREA_STYLE('',(#51584)); +#51584 = FILL_AREA_STYLE_COLOUR('',#51145); +#51585 = STYLED_ITEM('color',(#51586),#906); +#51586 = PRESENTATION_STYLE_ASSIGNMENT((#51587)); +#51587 = SURFACE_STYLE_USAGE(.BOTH.,#51588); +#51588 = SURFACE_SIDE_STYLE('',(#51589)); +#51589 = SURFACE_STYLE_FILL_AREA(#51590); +#51590 = FILL_AREA_STYLE('',(#51591)); +#51591 = FILL_AREA_STYLE_COLOUR('',#51145); +#51592 = STYLED_ITEM('color',(#51593),#1155); +#51593 = PRESENTATION_STYLE_ASSIGNMENT((#51594)); +#51594 = SURFACE_STYLE_USAGE(.BOTH.,#51595); +#51595 = SURFACE_SIDE_STYLE('',(#51596)); +#51596 = SURFACE_STYLE_FILL_AREA(#51597); +#51597 = FILL_AREA_STYLE('',(#51598)); +#51598 = FILL_AREA_STYLE_COLOUR('',#51599); +#51599 = COLOUR_RGB('',0.379000005575,0.270000008848,0.214999999939); +#51600 = STYLED_ITEM('color',(#51601),#1232); +#51601 = PRESENTATION_STYLE_ASSIGNMENT((#51602)); +#51602 = SURFACE_STYLE_USAGE(.BOTH.,#51603); +#51603 = SURFACE_SIDE_STYLE('',(#51604)); +#51604 = SURFACE_STYLE_FILL_AREA(#51605); +#51605 = FILL_AREA_STYLE('',(#51606)); +#51606 = FILL_AREA_STYLE_COLOUR('',#51599); +#51607 = STYLED_ITEM('color',(#51608),#1281); +#51608 = PRESENTATION_STYLE_ASSIGNMENT((#51609)); +#51609 = SURFACE_STYLE_USAGE(.BOTH.,#51610); +#51610 = SURFACE_SIDE_STYLE('',(#51611)); +#51611 = SURFACE_STYLE_FILL_AREA(#51612); +#51612 = FILL_AREA_STYLE('',(#51613)); +#51613 = FILL_AREA_STYLE_COLOUR('',#51599); +#51614 = STYLED_ITEM('color',(#51615),#1335); +#51615 = PRESENTATION_STYLE_ASSIGNMENT((#51616)); +#51616 = SURFACE_STYLE_USAGE(.BOTH.,#51617); +#51617 = SURFACE_SIDE_STYLE('',(#51618)); +#51618 = SURFACE_STYLE_FILL_AREA(#51619); +#51619 = FILL_AREA_STYLE('',(#51620)); +#51620 = FILL_AREA_STYLE_COLOUR('',#51599); +#51621 = STYLED_ITEM('color',(#51622),#1384); +#51622 = PRESENTATION_STYLE_ASSIGNMENT((#51623)); +#51623 = SURFACE_STYLE_USAGE(.BOTH.,#51624); +#51624 = SURFACE_SIDE_STYLE('',(#51625)); +#51625 = SURFACE_STYLE_FILL_AREA(#51626); +#51626 = FILL_AREA_STYLE('',(#51627)); +#51627 = FILL_AREA_STYLE_COLOUR('',#51599); +#51628 = STYLED_ITEM('color',(#51629),#1434); +#51629 = PRESENTATION_STYLE_ASSIGNMENT((#51630)); +#51630 = SURFACE_STYLE_USAGE(.BOTH.,#51631); +#51631 = SURFACE_SIDE_STYLE('',(#51632)); +#51632 = SURFACE_STYLE_FILL_AREA(#51633); +#51633 = FILL_AREA_STYLE('',(#51634)); +#51634 = FILL_AREA_STYLE_COLOUR('',#51599); +#51635 = STYLED_ITEM('color',(#51636),#1483); +#51636 = PRESENTATION_STYLE_ASSIGNMENT((#51637)); +#51637 = SURFACE_STYLE_USAGE(.BOTH.,#51638); +#51638 = SURFACE_SIDE_STYLE('',(#51639)); +#51639 = SURFACE_STYLE_FILL_AREA(#51640); +#51640 = FILL_AREA_STYLE('',(#51641)); +#51641 = FILL_AREA_STYLE_COLOUR('',#51599); +#51642 = STYLED_ITEM('color',(#51643),#1537); +#51643 = PRESENTATION_STYLE_ASSIGNMENT((#51644)); +#51644 = SURFACE_STYLE_USAGE(.BOTH.,#51645); +#51645 = SURFACE_SIDE_STYLE('',(#51646)); +#51646 = SURFACE_STYLE_FILL_AREA(#51647); +#51647 = FILL_AREA_STYLE('',(#51648)); +#51648 = FILL_AREA_STYLE_COLOUR('',#51599); +#51649 = STYLED_ITEM('color',(#51650),#1564); +#51650 = PRESENTATION_STYLE_ASSIGNMENT((#51651)); +#51651 = SURFACE_STYLE_USAGE(.BOTH.,#51652); +#51652 = SURFACE_SIDE_STYLE('',(#51653)); +#51653 = SURFACE_STYLE_FILL_AREA(#51654); +#51654 = FILL_AREA_STYLE('',(#51655)); +#51655 = FILL_AREA_STYLE_COLOUR('',#51145); +#51656 = STYLED_ITEM('color',(#51657),#1813); +#51657 = PRESENTATION_STYLE_ASSIGNMENT((#51658)); +#51658 = SURFACE_STYLE_USAGE(.BOTH.,#51659); +#51659 = SURFACE_SIDE_STYLE('',(#51660)); +#51660 = SURFACE_STYLE_FILL_AREA(#51661); +#51661 = FILL_AREA_STYLE('',(#51662)); +#51662 = FILL_AREA_STYLE_COLOUR('',#51145); +#51663 = STYLED_ITEM('color',(#51664),#1889); +#51664 = PRESENTATION_STYLE_ASSIGNMENT((#51665)); +#51665 = SURFACE_STYLE_USAGE(.BOTH.,#51666); +#51666 = SURFACE_SIDE_STYLE('',(#51667)); +#51667 = SURFACE_STYLE_FILL_AREA(#51668); +#51668 = FILL_AREA_STYLE('',(#51669)); +#51669 = FILL_AREA_STYLE_COLOUR('',#51145); +#51670 = STYLED_ITEM('color',(#51671),#1939); +#51671 = PRESENTATION_STYLE_ASSIGNMENT((#51672)); +#51672 = SURFACE_STYLE_USAGE(.BOTH.,#51673); +#51673 = SURFACE_SIDE_STYLE('',(#51674)); +#51674 = SURFACE_STYLE_FILL_AREA(#51675); +#51675 = FILL_AREA_STYLE('',(#51676)); +#51676 = FILL_AREA_STYLE_COLOUR('',#51145); +#51677 = STYLED_ITEM('color',(#51678),#1993); +#51678 = PRESENTATION_STYLE_ASSIGNMENT((#51679)); +#51679 = SURFACE_STYLE_USAGE(.BOTH.,#51680); +#51680 = SURFACE_SIDE_STYLE('',(#51681)); +#51681 = SURFACE_STYLE_FILL_AREA(#51682); +#51682 = FILL_AREA_STYLE('',(#51683)); +#51683 = FILL_AREA_STYLE_COLOUR('',#51145); +#51684 = STYLED_ITEM('color',(#51685),#2042); +#51685 = PRESENTATION_STYLE_ASSIGNMENT((#51686)); +#51686 = SURFACE_STYLE_USAGE(.BOTH.,#51687); +#51687 = SURFACE_SIDE_STYLE('',(#51688)); +#51688 = SURFACE_STYLE_FILL_AREA(#51689); +#51689 = FILL_AREA_STYLE('',(#51690)); +#51690 = FILL_AREA_STYLE_COLOUR('',#51145); +#51691 = STYLED_ITEM('color',(#51692),#2091); +#51692 = PRESENTATION_STYLE_ASSIGNMENT((#51693)); +#51693 = SURFACE_STYLE_USAGE(.BOTH.,#51694); +#51694 = SURFACE_SIDE_STYLE('',(#51695)); +#51695 = SURFACE_STYLE_FILL_AREA(#51696); +#51696 = FILL_AREA_STYLE('',(#51697)); +#51697 = FILL_AREA_STYLE_COLOUR('',#51145); +#51698 = STYLED_ITEM('color',(#51699),#2145); +#51699 = PRESENTATION_STYLE_ASSIGNMENT((#51700)); +#51700 = SURFACE_STYLE_USAGE(.BOTH.,#51701); +#51701 = SURFACE_SIDE_STYLE('',(#51702)); +#51702 = SURFACE_STYLE_FILL_AREA(#51703); +#51703 = FILL_AREA_STYLE('',(#51704)); +#51704 = FILL_AREA_STYLE_COLOUR('',#51145); +#51705 = STYLED_ITEM('color',(#51706),#2195); +#51706 = PRESENTATION_STYLE_ASSIGNMENT((#51707)); +#51707 = SURFACE_STYLE_USAGE(.BOTH.,#51708); +#51708 = SURFACE_SIDE_STYLE('',(#51709)); +#51709 = SURFACE_STYLE_FILL_AREA(#51710); +#51710 = FILL_AREA_STYLE('',(#51711)); +#51711 = FILL_AREA_STYLE_COLOUR('',#51145); +#51712 = STYLED_ITEM('color',(#51713),#2222); +#51713 = PRESENTATION_STYLE_ASSIGNMENT((#51714)); +#51714 = SURFACE_STYLE_USAGE(.BOTH.,#51715); +#51715 = SURFACE_SIDE_STYLE('',(#51716)); +#51716 = SURFACE_STYLE_FILL_AREA(#51717); +#51717 = FILL_AREA_STYLE('',(#51718)); +#51718 = FILL_AREA_STYLE_COLOUR('',#51145); +#51719 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #51720,#51727,#51734,#51741,#51748,#51755,#51762,#51769,#51776, + #51783,#51790,#51797,#51804,#51811,#51818,#51825,#51832,#51839, + #51846,#51853,#51860,#51867,#51874,#51881,#51888,#51895,#51902, + #51909,#51916,#51923,#51930,#51937,#51944,#51951,#51958,#51965, + #51972,#51979,#51986,#51993,#52000,#52007,#52014,#52021,#52028, + #52035,#52042,#52049,#52056,#52063,#52070,#52077,#52084,#52091, + #52098,#52105,#52112,#52119,#52126,#52133,#52140,#52147,#52154, + #52161,#52168,#52175,#52182,#52189,#52196,#52203,#52210,#52217, + #52224,#52231,#52238,#52245,#52252,#52259,#52266,#52273,#52280, + #52287,#52294,#52301,#52308,#52315,#52322,#52329,#52336,#52343, + #52350,#52357,#52364,#52371,#52378,#52385,#52392,#52399,#52406, + #52413,#52420,#52427,#52434,#52441,#52448,#52455,#52462,#52469, + #52476,#52483,#52490,#52497,#52504,#52511,#52518,#52525,#52532, + #52539,#52546,#52553,#52560,#52567,#52574,#52581,#52588,#52595, + #52602,#52609,#52616,#52623,#52630,#52637,#52644,#52651,#52658, + #52665,#52672,#52679,#52686,#52693,#52700,#52707,#52714,#52721, + #52728,#52735,#52742,#52749,#52756,#52763,#52770,#52777,#52784, + #52791,#52798,#52805),#40592); +#51720 = STYLED_ITEM('color',(#51721),#29690); +#51721 = PRESENTATION_STYLE_ASSIGNMENT((#51722)); +#51722 = SURFACE_STYLE_USAGE(.BOTH.,#51723); +#51723 = SURFACE_SIDE_STYLE('',(#51724)); +#51724 = SURFACE_STYLE_FILL_AREA(#51725); +#51725 = FILL_AREA_STYLE('',(#51726)); +#51726 = FILL_AREA_STYLE_COLOUR('',#50655); +#51727 = STYLED_ITEM('color',(#51728),#29820); +#51728 = PRESENTATION_STYLE_ASSIGNMENT((#51729)); +#51729 = SURFACE_STYLE_USAGE(.BOTH.,#51730); +#51730 = SURFACE_SIDE_STYLE('',(#51731)); +#51731 = SURFACE_STYLE_FILL_AREA(#51732); +#51732 = FILL_AREA_STYLE('',(#51733)); +#51733 = FILL_AREA_STYLE_COLOUR('',#50655); +#51734 = STYLED_ITEM('color',(#51735),#29896); +#51735 = PRESENTATION_STYLE_ASSIGNMENT((#51736)); +#51736 = SURFACE_STYLE_USAGE(.BOTH.,#51737); +#51737 = SURFACE_SIDE_STYLE('',(#51738)); +#51738 = SURFACE_STYLE_FILL_AREA(#51739); +#51739 = FILL_AREA_STYLE('',(#51740)); +#51740 = FILL_AREA_STYLE_COLOUR('',#50655); +#51741 = STYLED_ITEM('color',(#51742),#29972); +#51742 = PRESENTATION_STYLE_ASSIGNMENT((#51743)); +#51743 = SURFACE_STYLE_USAGE(.BOTH.,#51744); +#51744 = SURFACE_SIDE_STYLE('',(#51745)); +#51745 = SURFACE_STYLE_FILL_AREA(#51746); +#51746 = FILL_AREA_STYLE('',(#51747)); +#51747 = FILL_AREA_STYLE_COLOUR('',#50655); +#51748 = STYLED_ITEM('color',(#51749),#30230); +#51749 = PRESENTATION_STYLE_ASSIGNMENT((#51750)); +#51750 = SURFACE_STYLE_USAGE(.BOTH.,#51751); +#51751 = SURFACE_SIDE_STYLE('',(#51752)); +#51752 = SURFACE_STYLE_FILL_AREA(#51753); +#51753 = FILL_AREA_STYLE('',(#51754)); +#51754 = FILL_AREA_STYLE_COLOUR('',#50655); +#51755 = STYLED_ITEM('color',(#51756),#30453); +#51756 = PRESENTATION_STYLE_ASSIGNMENT((#51757)); +#51757 = SURFACE_STYLE_USAGE(.BOTH.,#51758); +#51758 = SURFACE_SIDE_STYLE('',(#51759)); +#51759 = SURFACE_STYLE_FILL_AREA(#51760); +#51760 = FILL_AREA_STYLE('',(#51761)); +#51761 = FILL_AREA_STYLE_COLOUR('',#50691); +#51762 = STYLED_ITEM('color',(#51763),#30750); +#51763 = PRESENTATION_STYLE_ASSIGNMENT((#51764)); +#51764 = SURFACE_STYLE_USAGE(.BOTH.,#51765); +#51765 = SURFACE_SIDE_STYLE('',(#51766)); +#51766 = SURFACE_STYLE_FILL_AREA(#51767); +#51767 = FILL_AREA_STYLE('',(#51768)); +#51768 = FILL_AREA_STYLE_COLOUR('',#50655); +#51769 = STYLED_ITEM('color',(#51770),#30777); +#51770 = PRESENTATION_STYLE_ASSIGNMENT((#51771)); +#51771 = SURFACE_STYLE_USAGE(.BOTH.,#51772); +#51772 = SURFACE_SIDE_STYLE('',(#51773)); +#51773 = SURFACE_STYLE_FILL_AREA(#51774); +#51774 = FILL_AREA_STYLE('',(#51775)); +#51775 = FILL_AREA_STYLE_COLOUR('',#50691); +#51776 = STYLED_ITEM('color',(#51777),#30833); +#51777 = PRESENTATION_STYLE_ASSIGNMENT((#51778)); +#51778 = SURFACE_STYLE_USAGE(.BOTH.,#51779); +#51779 = SURFACE_SIDE_STYLE('',(#51780)); +#51780 = SURFACE_STYLE_FILL_AREA(#51781); +#51781 = FILL_AREA_STYLE('',(#51782)); +#51782 = FILL_AREA_STYLE_COLOUR('',#50655); +#51783 = STYLED_ITEM('color',(#51784),#30980); +#51784 = PRESENTATION_STYLE_ASSIGNMENT((#51785)); +#51785 = SURFACE_STYLE_USAGE(.BOTH.,#51786); +#51786 = SURFACE_SIDE_STYLE('',(#51787)); +#51787 = SURFACE_STYLE_FILL_AREA(#51788); +#51788 = FILL_AREA_STYLE('',(#51789)); +#51789 = FILL_AREA_STYLE_COLOUR('',#50655); +#51790 = STYLED_ITEM('color',(#51791),#31007); +#51791 = PRESENTATION_STYLE_ASSIGNMENT((#51792)); +#51792 = SURFACE_STYLE_USAGE(.BOTH.,#51793); +#51793 = SURFACE_SIDE_STYLE('',(#51794)); +#51794 = SURFACE_STYLE_FILL_AREA(#51795); +#51795 = FILL_AREA_STYLE('',(#51796)); +#51796 = FILL_AREA_STYLE_COLOUR('',#50655); +#51797 = STYLED_ITEM('color',(#51798),#31034); +#51798 = PRESENTATION_STYLE_ASSIGNMENT((#51799)); +#51799 = SURFACE_STYLE_USAGE(.BOTH.,#51800); +#51800 = SURFACE_SIDE_STYLE('',(#51801)); +#51801 = SURFACE_STYLE_FILL_AREA(#51802); +#51802 = FILL_AREA_STYLE('',(#51803)); +#51803 = FILL_AREA_STYLE_COLOUR('',#50655); +#51804 = STYLED_ITEM('color',(#51805),#31061); +#51805 = PRESENTATION_STYLE_ASSIGNMENT((#51806)); +#51806 = SURFACE_STYLE_USAGE(.BOTH.,#51807); +#51807 = SURFACE_SIDE_STYLE('',(#51808)); +#51808 = SURFACE_STYLE_FILL_AREA(#51809); +#51809 = FILL_AREA_STYLE('',(#51810)); +#51810 = FILL_AREA_STYLE_COLOUR('',#50655); +#51811 = STYLED_ITEM('color',(#51812),#31088); +#51812 = PRESENTATION_STYLE_ASSIGNMENT((#51813)); +#51813 = SURFACE_STYLE_USAGE(.BOTH.,#51814); +#51814 = SURFACE_SIDE_STYLE('',(#51815)); +#51815 = SURFACE_STYLE_FILL_AREA(#51816); +#51816 = FILL_AREA_STYLE('',(#51817)); +#51817 = FILL_AREA_STYLE_COLOUR('',#50655); +#51818 = STYLED_ITEM('color',(#51819),#31115); +#51819 = PRESENTATION_STYLE_ASSIGNMENT((#51820)); +#51820 = SURFACE_STYLE_USAGE(.BOTH.,#51821); +#51821 = SURFACE_SIDE_STYLE('',(#51822)); +#51822 = SURFACE_STYLE_FILL_AREA(#51823); +#51823 = FILL_AREA_STYLE('',(#51824)); +#51824 = FILL_AREA_STYLE_COLOUR('',#50655); +#51825 = STYLED_ITEM('color',(#51826),#31122); +#51826 = PRESENTATION_STYLE_ASSIGNMENT((#51827)); +#51827 = SURFACE_STYLE_USAGE(.BOTH.,#51828); +#51828 = SURFACE_SIDE_STYLE('',(#51829)); +#51829 = SURFACE_STYLE_FILL_AREA(#51830); +#51830 = FILL_AREA_STYLE('',(#51831)); +#51831 = FILL_AREA_STYLE_COLOUR('',#50691); +#51832 = STYLED_ITEM('color',(#51833),#31176); +#51833 = PRESENTATION_STYLE_ASSIGNMENT((#51834)); +#51834 = SURFACE_STYLE_USAGE(.BOTH.,#51835); +#51835 = SURFACE_SIDE_STYLE('',(#51836)); +#51836 = SURFACE_STYLE_FILL_AREA(#51837); +#51837 = FILL_AREA_STYLE('',(#51838)); +#51838 = FILL_AREA_STYLE_COLOUR('',#50691); +#51839 = STYLED_ITEM('color',(#51840),#31357); +#51840 = PRESENTATION_STYLE_ASSIGNMENT((#51841)); +#51841 = SURFACE_STYLE_USAGE(.BOTH.,#51842); +#51842 = SURFACE_SIDE_STYLE('',(#51843)); +#51843 = SURFACE_STYLE_FILL_AREA(#51844); +#51844 = FILL_AREA_STYLE('',(#51845)); +#51845 = FILL_AREA_STYLE_COLOUR('',#50691); +#51846 = STYLED_ITEM('color',(#51847),#31405); +#51847 = PRESENTATION_STYLE_ASSIGNMENT((#51848)); +#51848 = SURFACE_STYLE_USAGE(.BOTH.,#51849); +#51849 = SURFACE_SIDE_STYLE('',(#51850)); +#51850 = SURFACE_STYLE_FILL_AREA(#51851); +#51851 = FILL_AREA_STYLE('',(#51852)); +#51852 = FILL_AREA_STYLE_COLOUR('',#50691); +#51853 = STYLED_ITEM('color',(#51854),#31458); +#51854 = PRESENTATION_STYLE_ASSIGNMENT((#51855)); +#51855 = SURFACE_STYLE_USAGE(.BOTH.,#51856); +#51856 = SURFACE_SIDE_STYLE('',(#51857)); +#51857 = SURFACE_STYLE_FILL_AREA(#51858); +#51858 = FILL_AREA_STYLE('',(#51859)); +#51859 = FILL_AREA_STYLE_COLOUR('',#50691); +#51860 = STYLED_ITEM('color',(#51861),#31536); +#51861 = PRESENTATION_STYLE_ASSIGNMENT((#51862)); +#51862 = SURFACE_STYLE_USAGE(.BOTH.,#51863); +#51863 = SURFACE_SIDE_STYLE('',(#51864)); +#51864 = SURFACE_STYLE_FILL_AREA(#51865); +#51865 = FILL_AREA_STYLE('',(#51866)); +#51866 = FILL_AREA_STYLE_COLOUR('',#50655); +#51867 = STYLED_ITEM('color',(#51868),#31617); +#51868 = PRESENTATION_STYLE_ASSIGNMENT((#51869)); +#51869 = SURFACE_STYLE_USAGE(.BOTH.,#51870); +#51870 = SURFACE_SIDE_STYLE('',(#51871)); +#51871 = SURFACE_STYLE_FILL_AREA(#51872); +#51872 = FILL_AREA_STYLE('',(#51873)); +#51873 = FILL_AREA_STYLE_COLOUR('',#50691); +#51874 = STYLED_ITEM('color',(#51875),#31698); +#51875 = PRESENTATION_STYLE_ASSIGNMENT((#51876)); +#51876 = SURFACE_STYLE_USAGE(.BOTH.,#51877); +#51877 = SURFACE_SIDE_STYLE('',(#51878)); +#51878 = SURFACE_STYLE_FILL_AREA(#51879); +#51879 = FILL_AREA_STYLE('',(#51880)); +#51880 = FILL_AREA_STYLE_COLOUR('',#50655); +#51881 = STYLED_ITEM('color',(#51882),#31779); +#51882 = PRESENTATION_STYLE_ASSIGNMENT((#51883)); +#51883 = SURFACE_STYLE_USAGE(.BOTH.,#51884); +#51884 = SURFACE_SIDE_STYLE('',(#51885)); +#51885 = SURFACE_STYLE_FILL_AREA(#51886); +#51886 = FILL_AREA_STYLE('',(#51887)); +#51887 = FILL_AREA_STYLE_COLOUR('',#50655); +#51888 = STYLED_ITEM('color',(#51889),#31860); +#51889 = PRESENTATION_STYLE_ASSIGNMENT((#51890)); +#51890 = SURFACE_STYLE_USAGE(.BOTH.,#51891); +#51891 = SURFACE_SIDE_STYLE('',(#51892)); +#51892 = SURFACE_STYLE_FILL_AREA(#51893); +#51893 = FILL_AREA_STYLE('',(#51894)); +#51894 = FILL_AREA_STYLE_COLOUR('',#50691); +#51895 = STYLED_ITEM('color',(#51896),#31936); +#51896 = PRESENTATION_STYLE_ASSIGNMENT((#51897)); +#51897 = SURFACE_STYLE_USAGE(.BOTH.,#51898); +#51898 = SURFACE_SIDE_STYLE('',(#51899)); +#51899 = SURFACE_STYLE_FILL_AREA(#51900); +#51900 = FILL_AREA_STYLE('',(#51901)); +#51901 = FILL_AREA_STYLE_COLOUR('',#50691); +#51902 = STYLED_ITEM('color',(#51903),#31992); +#51903 = PRESENTATION_STYLE_ASSIGNMENT((#51904)); +#51904 = SURFACE_STYLE_USAGE(.BOTH.,#51905); +#51905 = SURFACE_SIDE_STYLE('',(#51906)); +#51906 = SURFACE_STYLE_FILL_AREA(#51907); +#51907 = FILL_AREA_STYLE('',(#51908)); +#51908 = FILL_AREA_STYLE_COLOUR('',#50691); +#51909 = STYLED_ITEM('color',(#51910),#32039); +#51910 = PRESENTATION_STYLE_ASSIGNMENT((#51911)); +#51911 = SURFACE_STYLE_USAGE(.BOTH.,#51912); +#51912 = SURFACE_SIDE_STYLE('',(#51913)); +#51913 = SURFACE_STYLE_FILL_AREA(#51914); +#51914 = FILL_AREA_STYLE('',(#51915)); +#51915 = FILL_AREA_STYLE_COLOUR('',#50691); +#51916 = STYLED_ITEM('color',(#51917),#32295); +#51917 = PRESENTATION_STYLE_ASSIGNMENT((#51918)); +#51918 = SURFACE_STYLE_USAGE(.BOTH.,#51919); +#51919 = SURFACE_SIDE_STYLE('',(#51920)); +#51920 = SURFACE_STYLE_FILL_AREA(#51921); +#51921 = FILL_AREA_STYLE('',(#51922)); +#51922 = FILL_AREA_STYLE_COLOUR('',#50691); +#51923 = STYLED_ITEM('color',(#51924),#32321); +#51924 = PRESENTATION_STYLE_ASSIGNMENT((#51925)); +#51925 = SURFACE_STYLE_USAGE(.BOTH.,#51926); +#51926 = SURFACE_SIDE_STYLE('',(#51927)); +#51927 = SURFACE_STYLE_FILL_AREA(#51928); +#51928 = FILL_AREA_STYLE('',(#51929)); +#51929 = FILL_AREA_STYLE_COLOUR('',#50655); +#51930 = STYLED_ITEM('color',(#51931),#32606); +#51931 = PRESENTATION_STYLE_ASSIGNMENT((#51932)); +#51932 = SURFACE_STYLE_USAGE(.BOTH.,#51933); +#51933 = SURFACE_SIDE_STYLE('',(#51934)); +#51934 = SURFACE_STYLE_FILL_AREA(#51935); +#51935 = FILL_AREA_STYLE('',(#51936)); +#51936 = FILL_AREA_STYLE_COLOUR('',#50691); +#51937 = STYLED_ITEM('color',(#51938),#32654); +#51938 = PRESENTATION_STYLE_ASSIGNMENT((#51939)); +#51939 = SURFACE_STYLE_USAGE(.BOTH.,#51940); +#51940 = SURFACE_SIDE_STYLE('',(#51941)); +#51941 = SURFACE_STYLE_FILL_AREA(#51942); +#51942 = FILL_AREA_STYLE('',(#51943)); +#51943 = FILL_AREA_STYLE_COLOUR('',#50691); +#51944 = STYLED_ITEM('color',(#51945),#32707); +#51945 = PRESENTATION_STYLE_ASSIGNMENT((#51946)); +#51946 = SURFACE_STYLE_USAGE(.BOTH.,#51947); +#51947 = SURFACE_SIDE_STYLE('',(#51948)); +#51948 = SURFACE_STYLE_FILL_AREA(#51949); +#51949 = FILL_AREA_STYLE('',(#51950)); +#51950 = FILL_AREA_STYLE_COLOUR('',#50691); +#51951 = STYLED_ITEM('color',(#51952),#32760); +#51952 = PRESENTATION_STYLE_ASSIGNMENT((#51953)); +#51953 = SURFACE_STYLE_USAGE(.BOTH.,#51954); +#51954 = SURFACE_SIDE_STYLE('',(#51955)); +#51955 = SURFACE_STYLE_FILL_AREA(#51956); +#51956 = FILL_AREA_STYLE('',(#51957)); +#51957 = FILL_AREA_STYLE_COLOUR('',#50691); +#51958 = STYLED_ITEM('color',(#51959),#33037); +#51959 = PRESENTATION_STYLE_ASSIGNMENT((#51960)); +#51960 = SURFACE_STYLE_USAGE(.BOTH.,#51961); +#51961 = SURFACE_SIDE_STYLE('',(#51962)); +#51962 = SURFACE_STYLE_FILL_AREA(#51963); +#51963 = FILL_AREA_STYLE('',(#51964)); +#51964 = FILL_AREA_STYLE_COLOUR('',#50691); +#51965 = STYLED_ITEM('color',(#51966),#33069); +#51966 = PRESENTATION_STYLE_ASSIGNMENT((#51967)); +#51967 = SURFACE_STYLE_USAGE(.BOTH.,#51968); +#51968 = SURFACE_SIDE_STYLE('',(#51969)); +#51969 = SURFACE_STYLE_FILL_AREA(#51970); +#51970 = FILL_AREA_STYLE('',(#51971)); +#51971 = FILL_AREA_STYLE_COLOUR('',#50691); +#51972 = STYLED_ITEM('color',(#51973),#33120); +#51973 = PRESENTATION_STYLE_ASSIGNMENT((#51974)); +#51974 = SURFACE_STYLE_USAGE(.BOTH.,#51975); +#51975 = SURFACE_SIDE_STYLE('',(#51976)); +#51976 = SURFACE_STYLE_FILL_AREA(#51977); +#51977 = FILL_AREA_STYLE('',(#51978)); +#51978 = FILL_AREA_STYLE_COLOUR('',#50655); +#51979 = STYLED_ITEM('color',(#51980),#33405); +#51980 = PRESENTATION_STYLE_ASSIGNMENT((#51981)); +#51981 = SURFACE_STYLE_USAGE(.BOTH.,#51982); +#51982 = SURFACE_SIDE_STYLE('',(#51983)); +#51983 = SURFACE_STYLE_FILL_AREA(#51984); +#51984 = FILL_AREA_STYLE('',(#51985)); +#51985 = FILL_AREA_STYLE_COLOUR('',#50691); +#51986 = STYLED_ITEM('color',(#51987),#33473); +#51987 = PRESENTATION_STYLE_ASSIGNMENT((#51988)); +#51988 = SURFACE_STYLE_USAGE(.BOTH.,#51989); +#51989 = SURFACE_SIDE_STYLE('',(#51990)); +#51990 = SURFACE_STYLE_FILL_AREA(#51991); +#51991 = FILL_AREA_STYLE('',(#51992)); +#51992 = FILL_AREA_STYLE_COLOUR('',#50655); +#51993 = STYLED_ITEM('color',(#51994),#33718); +#51994 = PRESENTATION_STYLE_ASSIGNMENT((#51995)); +#51995 = SURFACE_STYLE_USAGE(.BOTH.,#51996); +#51996 = SURFACE_SIDE_STYLE('',(#51997)); +#51997 = SURFACE_STYLE_FILL_AREA(#51998); +#51998 = FILL_AREA_STYLE('',(#51999)); +#51999 = FILL_AREA_STYLE_COLOUR('',#50655); +#52000 = STYLED_ITEM('color',(#52001),#33745); +#52001 = PRESENTATION_STYLE_ASSIGNMENT((#52002)); +#52002 = SURFACE_STYLE_USAGE(.BOTH.,#52003); +#52003 = SURFACE_SIDE_STYLE('',(#52004)); +#52004 = SURFACE_STYLE_FILL_AREA(#52005); +#52005 = FILL_AREA_STYLE('',(#52006)); +#52006 = FILL_AREA_STYLE_COLOUR('',#50655); +#52007 = STYLED_ITEM('color',(#52008),#34030); +#52008 = PRESENTATION_STYLE_ASSIGNMENT((#52009)); +#52009 = SURFACE_STYLE_USAGE(.BOTH.,#52010); +#52010 = SURFACE_SIDE_STYLE('',(#52011)); +#52011 = SURFACE_STYLE_FILL_AREA(#52012); +#52012 = FILL_AREA_STYLE('',(#52013)); +#52013 = FILL_AREA_STYLE_COLOUR('',#50691); +#52014 = STYLED_ITEM('color',(#52015),#34098); +#52015 = PRESENTATION_STYLE_ASSIGNMENT((#52016)); +#52016 = SURFACE_STYLE_USAGE(.BOTH.,#52017); +#52017 = SURFACE_SIDE_STYLE('',(#52018)); +#52018 = SURFACE_STYLE_FILL_AREA(#52019); +#52019 = FILL_AREA_STYLE('',(#52020)); +#52020 = FILL_AREA_STYLE_COLOUR('',#50655); +#52021 = STYLED_ITEM('color',(#52022),#34152); +#52022 = PRESENTATION_STYLE_ASSIGNMENT((#52023)); +#52023 = SURFACE_STYLE_USAGE(.BOTH.,#52024); +#52024 = SURFACE_SIDE_STYLE('',(#52025)); +#52025 = SURFACE_STYLE_FILL_AREA(#52026); +#52026 = FILL_AREA_STYLE('',(#52027)); +#52027 = FILL_AREA_STYLE_COLOUR('',#50655); +#52028 = STYLED_ITEM('color',(#52029),#34370); +#52029 = PRESENTATION_STYLE_ASSIGNMENT((#52030)); +#52030 = SURFACE_STYLE_USAGE(.BOTH.,#52031); +#52031 = SURFACE_SIDE_STYLE('',(#52032)); +#52032 = SURFACE_STYLE_FILL_AREA(#52033); +#52033 = FILL_AREA_STYLE('',(#52034)); +#52034 = FILL_AREA_STYLE_COLOUR('',#50655); +#52035 = STYLED_ITEM('color',(#52036),#34615); +#52036 = PRESENTATION_STYLE_ASSIGNMENT((#52037)); +#52037 = SURFACE_STYLE_USAGE(.BOTH.,#52038); +#52038 = SURFACE_SIDE_STYLE('',(#52039)); +#52039 = SURFACE_STYLE_FILL_AREA(#52040); +#52040 = FILL_AREA_STYLE('',(#52041)); +#52041 = FILL_AREA_STYLE_COLOUR('',#50655); +#52042 = STYLED_ITEM('color',(#52043),#34642); +#52043 = PRESENTATION_STYLE_ASSIGNMENT((#52044)); +#52044 = SURFACE_STYLE_USAGE(.BOTH.,#52045); +#52045 = SURFACE_SIDE_STYLE('',(#52046)); +#52046 = SURFACE_STYLE_FILL_AREA(#52047); +#52047 = FILL_AREA_STYLE('',(#52048)); +#52048 = FILL_AREA_STYLE_COLOUR('',#50691); +#52049 = STYLED_ITEM('color',(#52050),#34687); +#52050 = PRESENTATION_STYLE_ASSIGNMENT((#52051)); +#52051 = SURFACE_STYLE_USAGE(.BOTH.,#52052); +#52052 = SURFACE_SIDE_STYLE('',(#52053)); +#52053 = SURFACE_STYLE_FILL_AREA(#52054); +#52054 = FILL_AREA_STYLE('',(#52055)); +#52055 = FILL_AREA_STYLE_COLOUR('',#50691); +#52056 = STYLED_ITEM('color',(#52057),#34739); +#52057 = PRESENTATION_STYLE_ASSIGNMENT((#52058)); +#52058 = SURFACE_STYLE_USAGE(.BOTH.,#52059); +#52059 = SURFACE_SIDE_STYLE('',(#52060)); +#52060 = SURFACE_STYLE_FILL_AREA(#52061); +#52061 = FILL_AREA_STYLE('',(#52062)); +#52062 = FILL_AREA_STYLE_COLOUR('',#50691); +#52063 = STYLED_ITEM('color',(#52064),#34785); +#52064 = PRESENTATION_STYLE_ASSIGNMENT((#52065)); +#52065 = SURFACE_STYLE_USAGE(.BOTH.,#52066); +#52066 = SURFACE_SIDE_STYLE('',(#52067)); +#52067 = SURFACE_STYLE_FILL_AREA(#52068); +#52068 = FILL_AREA_STYLE('',(#52069)); +#52069 = FILL_AREA_STYLE_COLOUR('',#50691); +#52070 = STYLED_ITEM('color',(#52071),#34837); +#52071 = PRESENTATION_STYLE_ASSIGNMENT((#52072)); +#52072 = SURFACE_STYLE_USAGE(.BOTH.,#52073); +#52073 = SURFACE_SIDE_STYLE('',(#52074)); +#52074 = SURFACE_STYLE_FILL_AREA(#52075); +#52075 = FILL_AREA_STYLE('',(#52076)); +#52076 = FILL_AREA_STYLE_COLOUR('',#50691); +#52077 = STYLED_ITEM('color',(#52078),#35027); +#52078 = PRESENTATION_STYLE_ASSIGNMENT((#52079)); +#52079 = SURFACE_STYLE_USAGE(.BOTH.,#52080); +#52080 = SURFACE_SIDE_STYLE('',(#52081)); +#52081 = SURFACE_STYLE_FILL_AREA(#52082); +#52082 = FILL_AREA_STYLE('',(#52083)); +#52083 = FILL_AREA_STYLE_COLOUR('',#50691); +#52084 = STYLED_ITEM('color',(#52085),#35074); +#52085 = PRESENTATION_STYLE_ASSIGNMENT((#52086)); +#52086 = SURFACE_STYLE_USAGE(.BOTH.,#52087); +#52087 = SURFACE_SIDE_STYLE('',(#52088)); +#52088 = SURFACE_STYLE_FILL_AREA(#52089); +#52089 = FILL_AREA_STYLE('',(#52090)); +#52090 = FILL_AREA_STYLE_COLOUR('',#50655); +#52091 = STYLED_ITEM('color',(#52092),#35103); +#52092 = PRESENTATION_STYLE_ASSIGNMENT((#52093)); +#52093 = SURFACE_STYLE_USAGE(.BOTH.,#52094); +#52094 = SURFACE_SIDE_STYLE('',(#52095)); +#52095 = SURFACE_STYLE_FILL_AREA(#52096); +#52096 = FILL_AREA_STYLE('',(#52097)); +#52097 = FILL_AREA_STYLE_COLOUR('',#50655); +#52098 = STYLED_ITEM('color',(#52099),#35132); +#52099 = PRESENTATION_STYLE_ASSIGNMENT((#52100)); +#52100 = SURFACE_STYLE_USAGE(.BOTH.,#52101); +#52101 = SURFACE_SIDE_STYLE('',(#52102)); +#52102 = SURFACE_STYLE_FILL_AREA(#52103); +#52103 = FILL_AREA_STYLE('',(#52104)); +#52104 = FILL_AREA_STYLE_COLOUR('',#50655); +#52105 = STYLED_ITEM('color',(#52106),#35161); +#52106 = PRESENTATION_STYLE_ASSIGNMENT((#52107)); +#52107 = SURFACE_STYLE_USAGE(.BOTH.,#52108); +#52108 = SURFACE_SIDE_STYLE('',(#52109)); +#52109 = SURFACE_STYLE_FILL_AREA(#52110); +#52110 = FILL_AREA_STYLE('',(#52111)); +#52111 = FILL_AREA_STYLE_COLOUR('',#50655); +#52112 = STYLED_ITEM('color',(#52113),#35188); +#52113 = PRESENTATION_STYLE_ASSIGNMENT((#52114)); +#52114 = SURFACE_STYLE_USAGE(.BOTH.,#52115); +#52115 = SURFACE_SIDE_STYLE('',(#52116)); +#52116 = SURFACE_STYLE_FILL_AREA(#52117); +#52117 = FILL_AREA_STYLE('',(#52118)); +#52118 = FILL_AREA_STYLE_COLOUR('',#50655); +#52119 = STYLED_ITEM('color',(#52120),#35215); +#52120 = PRESENTATION_STYLE_ASSIGNMENT((#52121)); +#52121 = SURFACE_STYLE_USAGE(.BOTH.,#52122); +#52122 = SURFACE_SIDE_STYLE('',(#52123)); +#52123 = SURFACE_STYLE_FILL_AREA(#52124); +#52124 = FILL_AREA_STYLE('',(#52125)); +#52125 = FILL_AREA_STYLE_COLOUR('',#50655); +#52126 = STYLED_ITEM('color',(#52127),#35242); +#52127 = PRESENTATION_STYLE_ASSIGNMENT((#52128)); +#52128 = SURFACE_STYLE_USAGE(.BOTH.,#52129); +#52129 = SURFACE_SIDE_STYLE('',(#52130)); +#52130 = SURFACE_STYLE_FILL_AREA(#52131); +#52131 = FILL_AREA_STYLE('',(#52132)); +#52132 = FILL_AREA_STYLE_COLOUR('',#50655); +#52133 = STYLED_ITEM('color',(#52134),#35269); +#52134 = PRESENTATION_STYLE_ASSIGNMENT((#52135)); +#52135 = SURFACE_STYLE_USAGE(.BOTH.,#52136); +#52136 = SURFACE_SIDE_STYLE('',(#52137)); +#52137 = SURFACE_STYLE_FILL_AREA(#52138); +#52138 = FILL_AREA_STYLE('',(#52139)); +#52139 = FILL_AREA_STYLE_COLOUR('',#50655); +#52140 = STYLED_ITEM('color',(#52141),#35296); +#52141 = PRESENTATION_STYLE_ASSIGNMENT((#52142)); +#52142 = SURFACE_STYLE_USAGE(.BOTH.,#52143); +#52143 = SURFACE_SIDE_STYLE('',(#52144)); +#52144 = SURFACE_STYLE_FILL_AREA(#52145); +#52145 = FILL_AREA_STYLE('',(#52146)); +#52146 = FILL_AREA_STYLE_COLOUR('',#50655); +#52147 = STYLED_ITEM('color',(#52148),#35323); +#52148 = PRESENTATION_STYLE_ASSIGNMENT((#52149)); +#52149 = SURFACE_STYLE_USAGE(.BOTH.,#52150); +#52150 = SURFACE_SIDE_STYLE('',(#52151)); +#52151 = SURFACE_STYLE_FILL_AREA(#52152); +#52152 = FILL_AREA_STYLE('',(#52153)); +#52153 = FILL_AREA_STYLE_COLOUR('',#50655); +#52154 = STYLED_ITEM('color',(#52155),#35350); +#52155 = PRESENTATION_STYLE_ASSIGNMENT((#52156)); +#52156 = SURFACE_STYLE_USAGE(.BOTH.,#52157); +#52157 = SURFACE_SIDE_STYLE('',(#52158)); +#52158 = SURFACE_STYLE_FILL_AREA(#52159); +#52159 = FILL_AREA_STYLE('',(#52160)); +#52160 = FILL_AREA_STYLE_COLOUR('',#50655); +#52161 = STYLED_ITEM('color',(#52162),#35357); +#52162 = PRESENTATION_STYLE_ASSIGNMENT((#52163)); +#52163 = SURFACE_STYLE_USAGE(.BOTH.,#52164); +#52164 = SURFACE_SIDE_STYLE('',(#52165)); +#52165 = SURFACE_STYLE_FILL_AREA(#52166); +#52166 = FILL_AREA_STYLE('',(#52167)); +#52167 = FILL_AREA_STYLE_COLOUR('',#50691); +#52168 = STYLED_ITEM('color',(#52169),#35408); +#52169 = PRESENTATION_STYLE_ASSIGNMENT((#52170)); +#52170 = SURFACE_STYLE_USAGE(.BOTH.,#52171); +#52171 = SURFACE_SIDE_STYLE('',(#52172)); +#52172 = SURFACE_STYLE_FILL_AREA(#52173); +#52173 = FILL_AREA_STYLE('',(#52174)); +#52174 = FILL_AREA_STYLE_COLOUR('',#50691); +#52175 = STYLED_ITEM('color',(#52176),#35459); +#52176 = PRESENTATION_STYLE_ASSIGNMENT((#52177)); +#52177 = SURFACE_STYLE_USAGE(.BOTH.,#52178); +#52178 = SURFACE_SIDE_STYLE('',(#52179)); +#52179 = SURFACE_STYLE_FILL_AREA(#52180); +#52180 = FILL_AREA_STYLE('',(#52181)); +#52181 = FILL_AREA_STYLE_COLOUR('',#50691); +#52182 = STYLED_ITEM('color',(#52183),#35518); +#52183 = PRESENTATION_STYLE_ASSIGNMENT((#52184)); +#52184 = SURFACE_STYLE_USAGE(.BOTH.,#52185); +#52185 = SURFACE_SIDE_STYLE('',(#52186)); +#52186 = SURFACE_STYLE_FILL_AREA(#52187); +#52187 = FILL_AREA_STYLE('',(#52188)); +#52188 = FILL_AREA_STYLE_COLOUR('',#50691); +#52189 = STYLED_ITEM('color',(#52190),#35596); +#52190 = PRESENTATION_STYLE_ASSIGNMENT((#52191)); +#52191 = SURFACE_STYLE_USAGE(.BOTH.,#52192); +#52192 = SURFACE_SIDE_STYLE('',(#52193)); +#52193 = SURFACE_STYLE_FILL_AREA(#52194); +#52194 = FILL_AREA_STYLE('',(#52195)); +#52195 = FILL_AREA_STYLE_COLOUR('',#50655); +#52196 = STYLED_ITEM('color',(#52197),#35677); +#52197 = PRESENTATION_STYLE_ASSIGNMENT((#52198)); +#52198 = SURFACE_STYLE_USAGE(.BOTH.,#52199); +#52199 = SURFACE_SIDE_STYLE('',(#52200)); +#52200 = SURFACE_STYLE_FILL_AREA(#52201); +#52201 = FILL_AREA_STYLE('',(#52202)); +#52202 = FILL_AREA_STYLE_COLOUR('',#50655); +#52203 = STYLED_ITEM('color',(#52204),#35758); +#52204 = PRESENTATION_STYLE_ASSIGNMENT((#52205)); +#52205 = SURFACE_STYLE_USAGE(.BOTH.,#52206); +#52206 = SURFACE_SIDE_STYLE('',(#52207)); +#52207 = SURFACE_STYLE_FILL_AREA(#52208); +#52208 = FILL_AREA_STYLE('',(#52209)); +#52209 = FILL_AREA_STYLE_COLOUR('',#50691); +#52210 = STYLED_ITEM('color',(#52211),#35839); +#52211 = PRESENTATION_STYLE_ASSIGNMENT((#52212)); +#52212 = SURFACE_STYLE_USAGE(.BOTH.,#52213); +#52213 = SURFACE_SIDE_STYLE('',(#52214)); +#52214 = SURFACE_STYLE_FILL_AREA(#52215); +#52215 = FILL_AREA_STYLE('',(#52216)); +#52216 = FILL_AREA_STYLE_COLOUR('',#50691); +#52217 = STYLED_ITEM('color',(#52218),#35920); +#52218 = PRESENTATION_STYLE_ASSIGNMENT((#52219)); +#52219 = SURFACE_STYLE_USAGE(.BOTH.,#52220); +#52220 = SURFACE_SIDE_STYLE('',(#52221)); +#52221 = SURFACE_STYLE_FILL_AREA(#52222); +#52222 = FILL_AREA_STYLE('',(#52223)); +#52223 = FILL_AREA_STYLE_COLOUR('',#50655); +#52224 = STYLED_ITEM('color',(#52225),#36001); +#52225 = PRESENTATION_STYLE_ASSIGNMENT((#52226)); +#52226 = SURFACE_STYLE_USAGE(.BOTH.,#52227); +#52227 = SURFACE_SIDE_STYLE('',(#52228)); +#52228 = SURFACE_STYLE_FILL_AREA(#52229); +#52229 = FILL_AREA_STYLE('',(#52230)); +#52230 = FILL_AREA_STYLE_COLOUR('',#50655); +#52231 = STYLED_ITEM('color',(#52232),#36082); +#52232 = PRESENTATION_STYLE_ASSIGNMENT((#52233)); +#52233 = SURFACE_STYLE_USAGE(.BOTH.,#52234); +#52234 = SURFACE_SIDE_STYLE('',(#52235)); +#52235 = SURFACE_STYLE_FILL_AREA(#52236); +#52236 = FILL_AREA_STYLE('',(#52237)); +#52237 = FILL_AREA_STYLE_COLOUR('',#50691); +#52238 = STYLED_ITEM('color',(#52239),#36158); +#52239 = PRESENTATION_STYLE_ASSIGNMENT((#52240)); +#52240 = SURFACE_STYLE_USAGE(.BOTH.,#52241); +#52241 = SURFACE_SIDE_STYLE('',(#52242)); +#52242 = SURFACE_STYLE_FILL_AREA(#52243); +#52243 = FILL_AREA_STYLE('',(#52244)); +#52244 = FILL_AREA_STYLE_COLOUR('',#50691); +#52245 = STYLED_ITEM('color',(#52246),#36190); +#52246 = PRESENTATION_STYLE_ASSIGNMENT((#52247)); +#52247 = SURFACE_STYLE_USAGE(.BOTH.,#52248); +#52248 = SURFACE_SIDE_STYLE('',(#52249)); +#52249 = SURFACE_STYLE_FILL_AREA(#52250); +#52250 = FILL_AREA_STYLE('',(#52251)); +#52251 = FILL_AREA_STYLE_COLOUR('',#50691); +#52252 = STYLED_ITEM('color',(#52253),#36216); +#52253 = PRESENTATION_STYLE_ASSIGNMENT((#52254)); +#52254 = SURFACE_STYLE_USAGE(.BOTH.,#52255); +#52255 = SURFACE_SIDE_STYLE('',(#52256)); +#52256 = SURFACE_STYLE_FILL_AREA(#52257); +#52257 = FILL_AREA_STYLE('',(#52258)); +#52258 = FILL_AREA_STYLE_COLOUR('',#50655); +#52259 = STYLED_ITEM('color',(#52260),#36243); +#52260 = PRESENTATION_STYLE_ASSIGNMENT((#52261)); +#52261 = SURFACE_STYLE_USAGE(.BOTH.,#52262); +#52262 = SURFACE_SIDE_STYLE('',(#52263)); +#52263 = SURFACE_STYLE_FILL_AREA(#52264); +#52264 = FILL_AREA_STYLE('',(#52265)); +#52265 = FILL_AREA_STYLE_COLOUR('',#50655); +#52266 = STYLED_ITEM('color',(#52267),#36270); +#52267 = PRESENTATION_STYLE_ASSIGNMENT((#52268)); +#52268 = SURFACE_STYLE_USAGE(.BOTH.,#52269); +#52269 = SURFACE_SIDE_STYLE('',(#52270)); +#52270 = SURFACE_STYLE_FILL_AREA(#52271); +#52271 = FILL_AREA_STYLE('',(#52272)); +#52272 = FILL_AREA_STYLE_COLOUR('',#50655); +#52273 = STYLED_ITEM('color',(#52274),#36297); +#52274 = PRESENTATION_STYLE_ASSIGNMENT((#52275)); +#52275 = SURFACE_STYLE_USAGE(.BOTH.,#52276); +#52276 = SURFACE_SIDE_STYLE('',(#52277)); +#52277 = SURFACE_STYLE_FILL_AREA(#52278); +#52278 = FILL_AREA_STYLE('',(#52279)); +#52279 = FILL_AREA_STYLE_COLOUR('',#50655); +#52280 = STYLED_ITEM('color',(#52281),#36324); +#52281 = PRESENTATION_STYLE_ASSIGNMENT((#52282)); +#52282 = SURFACE_STYLE_USAGE(.BOTH.,#52283); +#52283 = SURFACE_SIDE_STYLE('',(#52284)); +#52284 = SURFACE_STYLE_FILL_AREA(#52285); +#52285 = FILL_AREA_STYLE('',(#52286)); +#52286 = FILL_AREA_STYLE_COLOUR('',#50655); +#52287 = STYLED_ITEM('color',(#52288),#36351); +#52288 = PRESENTATION_STYLE_ASSIGNMENT((#52289)); +#52289 = SURFACE_STYLE_USAGE(.BOTH.,#52290); +#52290 = SURFACE_SIDE_STYLE('',(#52291)); +#52291 = SURFACE_STYLE_FILL_AREA(#52292); +#52292 = FILL_AREA_STYLE('',(#52293)); +#52293 = FILL_AREA_STYLE_COLOUR('',#50655); +#52294 = STYLED_ITEM('color',(#52295),#36378); +#52295 = PRESENTATION_STYLE_ASSIGNMENT((#52296)); +#52296 = SURFACE_STYLE_USAGE(.BOTH.,#52297); +#52297 = SURFACE_SIDE_STYLE('',(#52298)); +#52298 = SURFACE_STYLE_FILL_AREA(#52299); +#52299 = FILL_AREA_STYLE('',(#52300)); +#52300 = FILL_AREA_STYLE_COLOUR('',#50655); +#52301 = STYLED_ITEM('color',(#52302),#36405); +#52302 = PRESENTATION_STYLE_ASSIGNMENT((#52303)); +#52303 = SURFACE_STYLE_USAGE(.BOTH.,#52304); +#52304 = SURFACE_SIDE_STYLE('',(#52305)); +#52305 = SURFACE_STYLE_FILL_AREA(#52306); +#52306 = FILL_AREA_STYLE('',(#52307)); +#52307 = FILL_AREA_STYLE_COLOUR('',#50655); +#52308 = STYLED_ITEM('color',(#52309),#36412); +#52309 = PRESENTATION_STYLE_ASSIGNMENT((#52310)); +#52310 = SURFACE_STYLE_USAGE(.BOTH.,#52311); +#52311 = SURFACE_SIDE_STYLE('',(#52312)); +#52312 = SURFACE_STYLE_FILL_AREA(#52313); +#52313 = FILL_AREA_STYLE('',(#52314)); +#52314 = FILL_AREA_STYLE_COLOUR('',#50655); +#52315 = STYLED_ITEM('color',(#52316),#36439); +#52316 = PRESENTATION_STYLE_ASSIGNMENT((#52317)); +#52317 = SURFACE_STYLE_USAGE(.BOTH.,#52318); +#52318 = SURFACE_SIDE_STYLE('',(#52319)); +#52319 = SURFACE_STYLE_FILL_AREA(#52320); +#52320 = FILL_AREA_STYLE('',(#52321)); +#52321 = FILL_AREA_STYLE_COLOUR('',#50655); +#52322 = STYLED_ITEM('color',(#52323),#36466); +#52323 = PRESENTATION_STYLE_ASSIGNMENT((#52324)); +#52324 = SURFACE_STYLE_USAGE(.BOTH.,#52325); +#52325 = SURFACE_SIDE_STYLE('',(#52326)); +#52326 = SURFACE_STYLE_FILL_AREA(#52327); +#52327 = FILL_AREA_STYLE('',(#52328)); +#52328 = FILL_AREA_STYLE_COLOUR('',#50655); +#52329 = STYLED_ITEM('color',(#52330),#36493); +#52330 = PRESENTATION_STYLE_ASSIGNMENT((#52331)); +#52331 = SURFACE_STYLE_USAGE(.BOTH.,#52332); +#52332 = SURFACE_SIDE_STYLE('',(#52333)); +#52333 = SURFACE_STYLE_FILL_AREA(#52334); +#52334 = FILL_AREA_STYLE('',(#52335)); +#52335 = FILL_AREA_STYLE_COLOUR('',#50655); +#52336 = STYLED_ITEM('color',(#52337),#36520); +#52337 = PRESENTATION_STYLE_ASSIGNMENT((#52338)); +#52338 = SURFACE_STYLE_USAGE(.BOTH.,#52339); +#52339 = SURFACE_SIDE_STYLE('',(#52340)); +#52340 = SURFACE_STYLE_FILL_AREA(#52341); +#52341 = FILL_AREA_STYLE('',(#52342)); +#52342 = FILL_AREA_STYLE_COLOUR('',#50655); +#52343 = STYLED_ITEM('color',(#52344),#36547); +#52344 = PRESENTATION_STYLE_ASSIGNMENT((#52345)); +#52345 = SURFACE_STYLE_USAGE(.BOTH.,#52346); +#52346 = SURFACE_SIDE_STYLE('',(#52347)); +#52347 = SURFACE_STYLE_FILL_AREA(#52348); +#52348 = FILL_AREA_STYLE('',(#52349)); +#52349 = FILL_AREA_STYLE_COLOUR('',#50655); +#52350 = STYLED_ITEM('color',(#52351),#36574); +#52351 = PRESENTATION_STYLE_ASSIGNMENT((#52352)); +#52352 = SURFACE_STYLE_USAGE(.BOTH.,#52353); +#52353 = SURFACE_SIDE_STYLE('',(#52354)); +#52354 = SURFACE_STYLE_FILL_AREA(#52355); +#52355 = FILL_AREA_STYLE('',(#52356)); +#52356 = FILL_AREA_STYLE_COLOUR('',#50655); +#52357 = STYLED_ITEM('color',(#52358),#36601); +#52358 = PRESENTATION_STYLE_ASSIGNMENT((#52359)); +#52359 = SURFACE_STYLE_USAGE(.BOTH.,#52360); +#52360 = SURFACE_SIDE_STYLE('',(#52361)); +#52361 = SURFACE_STYLE_FILL_AREA(#52362); +#52362 = FILL_AREA_STYLE('',(#52363)); +#52363 = FILL_AREA_STYLE_COLOUR('',#50655); +#52364 = STYLED_ITEM('color',(#52365),#36608); +#52365 = PRESENTATION_STYLE_ASSIGNMENT((#52366)); +#52366 = SURFACE_STYLE_USAGE(.BOTH.,#52367); +#52367 = SURFACE_SIDE_STYLE('',(#52368)); +#52368 = SURFACE_STYLE_FILL_AREA(#52369); +#52369 = FILL_AREA_STYLE('',(#52370)); +#52370 = FILL_AREA_STYLE_COLOUR('',#50691); +#52371 = STYLED_ITEM('color',(#52372),#36655); +#52372 = PRESENTATION_STYLE_ASSIGNMENT((#52373)); +#52373 = SURFACE_STYLE_USAGE(.BOTH.,#52374); +#52374 = SURFACE_SIDE_STYLE('',(#52375)); +#52375 = SURFACE_STYLE_FILL_AREA(#52376); +#52376 = FILL_AREA_STYLE('',(#52377)); +#52377 = FILL_AREA_STYLE_COLOUR('',#50691); +#52378 = STYLED_ITEM('color',(#52379),#36681); +#52379 = PRESENTATION_STYLE_ASSIGNMENT((#52380)); +#52380 = SURFACE_STYLE_USAGE(.BOTH.,#52381); +#52381 = SURFACE_SIDE_STYLE('',(#52382)); +#52382 = SURFACE_STYLE_FILL_AREA(#52383); +#52383 = FILL_AREA_STYLE('',(#52384)); +#52384 = FILL_AREA_STYLE_COLOUR('',#50691); +#52385 = STYLED_ITEM('color',(#52386),#36728); +#52386 = PRESENTATION_STYLE_ASSIGNMENT((#52387)); +#52387 = SURFACE_STYLE_USAGE(.BOTH.,#52388); +#52388 = SURFACE_SIDE_STYLE('',(#52389)); +#52389 = SURFACE_STYLE_FILL_AREA(#52390); +#52390 = FILL_AREA_STYLE('',(#52391)); +#52391 = FILL_AREA_STYLE_COLOUR('',#50691); +#52392 = STYLED_ITEM('color',(#52393),#36975); +#52393 = PRESENTATION_STYLE_ASSIGNMENT((#52394)); +#52394 = SURFACE_STYLE_USAGE(.BOTH.,#52395); +#52395 = SURFACE_SIDE_STYLE('',(#52396)); +#52396 = SURFACE_STYLE_FILL_AREA(#52397); +#52397 = FILL_AREA_STYLE('',(#52398)); +#52398 = FILL_AREA_STYLE_COLOUR('',#50691); +#52399 = STYLED_ITEM('color',(#52400),#37022); +#52400 = PRESENTATION_STYLE_ASSIGNMENT((#52401)); +#52401 = SURFACE_STYLE_USAGE(.BOTH.,#52402); +#52402 = SURFACE_SIDE_STYLE('',(#52403)); +#52403 = SURFACE_STYLE_FILL_AREA(#52404); +#52404 = FILL_AREA_STYLE('',(#52405)); +#52405 = FILL_AREA_STYLE_COLOUR('',#50691); +#52406 = STYLED_ITEM('color',(#52407),#37048); +#52407 = PRESENTATION_STYLE_ASSIGNMENT((#52408)); +#52408 = SURFACE_STYLE_USAGE(.BOTH.,#52409); +#52409 = SURFACE_SIDE_STYLE('',(#52410)); +#52410 = SURFACE_STYLE_FILL_AREA(#52411); +#52411 = FILL_AREA_STYLE('',(#52412)); +#52412 = FILL_AREA_STYLE_COLOUR('',#51035); +#52413 = STYLED_ITEM('color',(#52414),#37103); +#52414 = PRESENTATION_STYLE_ASSIGNMENT((#52415)); +#52415 = SURFACE_STYLE_USAGE(.BOTH.,#52416); +#52416 = SURFACE_SIDE_STYLE('',(#52417)); +#52417 = SURFACE_STYLE_FILL_AREA(#52418); +#52418 = FILL_AREA_STYLE('',(#52419)); +#52419 = FILL_AREA_STYLE_COLOUR('',#50691); +#52420 = STYLED_ITEM('color',(#52421),#37129); +#52421 = PRESENTATION_STYLE_ASSIGNMENT((#52422)); +#52422 = SURFACE_STYLE_USAGE(.BOTH.,#52423); +#52423 = SURFACE_SIDE_STYLE('',(#52424)); +#52424 = SURFACE_STYLE_FILL_AREA(#52425); +#52425 = FILL_AREA_STYLE('',(#52426)); +#52426 = FILL_AREA_STYLE_COLOUR('',#50691); +#52427 = STYLED_ITEM('color',(#52428),#37155); +#52428 = PRESENTATION_STYLE_ASSIGNMENT((#52429)); +#52429 = SURFACE_STYLE_USAGE(.BOTH.,#52430); +#52430 = SURFACE_SIDE_STYLE('',(#52431)); +#52431 = SURFACE_STYLE_FILL_AREA(#52432); +#52432 = FILL_AREA_STYLE('',(#52433)); +#52433 = FILL_AREA_STYLE_COLOUR('',#50691); +#52434 = STYLED_ITEM('color',(#52435),#37204); +#52435 = PRESENTATION_STYLE_ASSIGNMENT((#52436)); +#52436 = SURFACE_STYLE_USAGE(.BOTH.,#52437); +#52437 = SURFACE_SIDE_STYLE('',(#52438)); +#52438 = SURFACE_STYLE_FILL_AREA(#52439); +#52439 = FILL_AREA_STYLE('',(#52440)); +#52440 = FILL_AREA_STYLE_COLOUR('',#50655); +#52441 = STYLED_ITEM('color',(#52442),#37489); +#52442 = PRESENTATION_STYLE_ASSIGNMENT((#52443)); +#52443 = SURFACE_STYLE_USAGE(.BOTH.,#52444); +#52444 = SURFACE_SIDE_STYLE('',(#52445)); +#52445 = SURFACE_STYLE_FILL_AREA(#52446); +#52446 = FILL_AREA_STYLE('',(#52447)); +#52447 = FILL_AREA_STYLE_COLOUR('',#50655); +#52448 = STYLED_ITEM('color',(#52449),#37774); +#52449 = PRESENTATION_STYLE_ASSIGNMENT((#52450)); +#52450 = SURFACE_STYLE_USAGE(.BOTH.,#52451); +#52451 = SURFACE_SIDE_STYLE('',(#52452)); +#52452 = SURFACE_STYLE_FILL_AREA(#52453); +#52453 = FILL_AREA_STYLE('',(#52454)); +#52454 = FILL_AREA_STYLE_COLOUR('',#50691); +#52455 = STYLED_ITEM('color',(#52456),#37842); +#52456 = PRESENTATION_STYLE_ASSIGNMENT((#52457)); +#52457 = SURFACE_STYLE_USAGE(.BOTH.,#52458); +#52458 = SURFACE_SIDE_STYLE('',(#52459)); +#52459 = SURFACE_STYLE_FILL_AREA(#52460); +#52460 = FILL_AREA_STYLE('',(#52461)); +#52461 = FILL_AREA_STYLE_COLOUR('',#50655); +#52462 = STYLED_ITEM('color',(#52463),#37896); +#52463 = PRESENTATION_STYLE_ASSIGNMENT((#52464)); +#52464 = SURFACE_STYLE_USAGE(.BOTH.,#52465); +#52465 = SURFACE_SIDE_STYLE('',(#52466)); +#52466 = SURFACE_STYLE_FILL_AREA(#52467); +#52467 = FILL_AREA_STYLE('',(#52468)); +#52468 = FILL_AREA_STYLE_COLOUR('',#50655); +#52469 = STYLED_ITEM('color',(#52470),#38114); +#52470 = PRESENTATION_STYLE_ASSIGNMENT((#52471)); +#52471 = SURFACE_STYLE_USAGE(.BOTH.,#52472); +#52472 = SURFACE_SIDE_STYLE('',(#52473)); +#52473 = SURFACE_STYLE_FILL_AREA(#52474); +#52474 = FILL_AREA_STYLE('',(#52475)); +#52475 = FILL_AREA_STYLE_COLOUR('',#50655); +#52476 = STYLED_ITEM('color',(#52477),#38359); +#52477 = PRESENTATION_STYLE_ASSIGNMENT((#52478)); +#52478 = SURFACE_STYLE_USAGE(.BOTH.,#52479); +#52479 = SURFACE_SIDE_STYLE('',(#52480)); +#52480 = SURFACE_STYLE_FILL_AREA(#52481); +#52481 = FILL_AREA_STYLE('',(#52482)); +#52482 = FILL_AREA_STYLE_COLOUR('',#50655); +#52483 = STYLED_ITEM('color',(#52484),#38386); +#52484 = PRESENTATION_STYLE_ASSIGNMENT((#52485)); +#52485 = SURFACE_STYLE_USAGE(.BOTH.,#52486); +#52486 = SURFACE_SIDE_STYLE('',(#52487)); +#52487 = SURFACE_STYLE_FILL_AREA(#52488); +#52488 = FILL_AREA_STYLE('',(#52489)); +#52489 = FILL_AREA_STYLE_COLOUR('',#50691); +#52490 = STYLED_ITEM('color',(#52491),#38454); +#52491 = PRESENTATION_STYLE_ASSIGNMENT((#52492)); +#52492 = SURFACE_STYLE_USAGE(.BOTH.,#52493); +#52493 = SURFACE_SIDE_STYLE('',(#52494)); +#52494 = SURFACE_STYLE_FILL_AREA(#52495); +#52495 = FILL_AREA_STYLE('',(#52496)); +#52496 = FILL_AREA_STYLE_COLOUR('',#50655); +#52497 = STYLED_ITEM('color',(#52498),#38739); +#52498 = PRESENTATION_STYLE_ASSIGNMENT((#52499)); +#52499 = SURFACE_STYLE_USAGE(.BOTH.,#52500); +#52500 = SURFACE_SIDE_STYLE('',(#52501)); +#52501 = SURFACE_STYLE_FILL_AREA(#52502); +#52502 = FILL_AREA_STYLE('',(#52503)); +#52503 = FILL_AREA_STYLE_COLOUR('',#50655); +#52504 = STYLED_ITEM('color',(#52505),#39024); +#52505 = PRESENTATION_STYLE_ASSIGNMENT((#52506)); +#52506 = SURFACE_STYLE_USAGE(.BOTH.,#52507); +#52507 = SURFACE_SIDE_STYLE('',(#52508)); +#52508 = SURFACE_STYLE_FILL_AREA(#52509); +#52509 = FILL_AREA_STYLE('',(#52510)); +#52510 = FILL_AREA_STYLE_COLOUR('',#50691); +#52511 = STYLED_ITEM('color',(#52512),#39092); +#52512 = PRESENTATION_STYLE_ASSIGNMENT((#52513)); +#52513 = SURFACE_STYLE_USAGE(.BOTH.,#52514); +#52514 = SURFACE_SIDE_STYLE('',(#52515)); +#52515 = SURFACE_STYLE_FILL_AREA(#52516); +#52516 = FILL_AREA_STYLE('',(#52517)); +#52517 = FILL_AREA_STYLE_COLOUR('',#50655); +#52518 = STYLED_ITEM('color',(#52519),#39146); +#52519 = PRESENTATION_STYLE_ASSIGNMENT((#52520)); +#52520 = SURFACE_STYLE_USAGE(.BOTH.,#52521); +#52521 = SURFACE_SIDE_STYLE('',(#52522)); +#52522 = SURFACE_STYLE_FILL_AREA(#52523); +#52523 = FILL_AREA_STYLE('',(#52524)); +#52524 = FILL_AREA_STYLE_COLOUR('',#50655); +#52525 = STYLED_ITEM('color',(#52526),#39364); +#52526 = PRESENTATION_STYLE_ASSIGNMENT((#52527)); +#52527 = SURFACE_STYLE_USAGE(.BOTH.,#52528); +#52528 = SURFACE_SIDE_STYLE('',(#52529)); +#52529 = SURFACE_STYLE_FILL_AREA(#52530); +#52530 = FILL_AREA_STYLE('',(#52531)); +#52531 = FILL_AREA_STYLE_COLOUR('',#50655); +#52532 = STYLED_ITEM('color',(#52533),#39609); +#52533 = PRESENTATION_STYLE_ASSIGNMENT((#52534)); +#52534 = SURFACE_STYLE_USAGE(.BOTH.,#52535); +#52535 = SURFACE_SIDE_STYLE('',(#52536)); +#52536 = SURFACE_STYLE_FILL_AREA(#52537); +#52537 = FILL_AREA_STYLE('',(#52538)); +#52538 = FILL_AREA_STYLE_COLOUR('',#50655); +#52539 = STYLED_ITEM('color',(#52540),#39636); +#52540 = PRESENTATION_STYLE_ASSIGNMENT((#52541)); +#52541 = SURFACE_STYLE_USAGE(.BOTH.,#52542); +#52542 = SURFACE_SIDE_STYLE('',(#52543)); +#52543 = SURFACE_STYLE_FILL_AREA(#52544); +#52544 = FILL_AREA_STYLE('',(#52545)); +#52545 = FILL_AREA_STYLE_COLOUR('',#50691); +#52546 = STYLED_ITEM('color',(#52547),#39681); +#52547 = PRESENTATION_STYLE_ASSIGNMENT((#52548)); +#52548 = SURFACE_STYLE_USAGE(.BOTH.,#52549); +#52549 = SURFACE_SIDE_STYLE('',(#52550)); +#52550 = SURFACE_STYLE_FILL_AREA(#52551); +#52551 = FILL_AREA_STYLE('',(#52552)); +#52552 = FILL_AREA_STYLE_COLOUR('',#50691); +#52553 = STYLED_ITEM('color',(#52554),#39688); +#52554 = PRESENTATION_STYLE_ASSIGNMENT((#52555)); +#52555 = SURFACE_STYLE_USAGE(.BOTH.,#52556); +#52556 = SURFACE_SIDE_STYLE('',(#52557)); +#52557 = SURFACE_STYLE_FILL_AREA(#52558); +#52558 = FILL_AREA_STYLE('',(#52559)); +#52559 = FILL_AREA_STYLE_COLOUR('',#50655); +#52560 = STYLED_ITEM('color',(#52561),#39717); +#52561 = PRESENTATION_STYLE_ASSIGNMENT((#52562)); +#52562 = SURFACE_STYLE_USAGE(.BOTH.,#52563); +#52563 = SURFACE_SIDE_STYLE('',(#52564)); +#52564 = SURFACE_STYLE_FILL_AREA(#52565); +#52565 = FILL_AREA_STYLE('',(#52566)); +#52566 = FILL_AREA_STYLE_COLOUR('',#50655); +#52567 = STYLED_ITEM('color',(#52568),#39746); +#52568 = PRESENTATION_STYLE_ASSIGNMENT((#52569)); +#52569 = SURFACE_STYLE_USAGE(.BOTH.,#52570); +#52570 = SURFACE_SIDE_STYLE('',(#52571)); +#52571 = SURFACE_STYLE_FILL_AREA(#52572); +#52572 = FILL_AREA_STYLE('',(#52573)); +#52573 = FILL_AREA_STYLE_COLOUR('',#50655); +#52574 = STYLED_ITEM('color',(#52575),#39775); +#52575 = PRESENTATION_STYLE_ASSIGNMENT((#52576)); +#52576 = SURFACE_STYLE_USAGE(.BOTH.,#52577); +#52577 = SURFACE_SIDE_STYLE('',(#52578)); +#52578 = SURFACE_STYLE_FILL_AREA(#52579); +#52579 = FILL_AREA_STYLE('',(#52580)); +#52580 = FILL_AREA_STYLE_COLOUR('',#50655); +#52581 = STYLED_ITEM('color',(#52582),#39804); +#52582 = PRESENTATION_STYLE_ASSIGNMENT((#52583)); +#52583 = SURFACE_STYLE_USAGE(.BOTH.,#52584); +#52584 = SURFACE_SIDE_STYLE('',(#52585)); +#52585 = SURFACE_STYLE_FILL_AREA(#52586); +#52586 = FILL_AREA_STYLE('',(#52587)); +#52587 = FILL_AREA_STYLE_COLOUR('',#51035); +#52588 = STYLED_ITEM('color',(#52589),#39808); +#52589 = PRESENTATION_STYLE_ASSIGNMENT((#52590)); +#52590 = SURFACE_STYLE_USAGE(.BOTH.,#52591); +#52591 = SURFACE_SIDE_STYLE('',(#52592)); +#52592 = SURFACE_STYLE_FILL_AREA(#52593); +#52593 = FILL_AREA_STYLE('',(#52594)); +#52594 = FILL_AREA_STYLE_COLOUR('',#50655); +#52595 = STYLED_ITEM('color',(#52596),#39835); +#52596 = PRESENTATION_STYLE_ASSIGNMENT((#52597)); +#52597 = SURFACE_STYLE_USAGE(.BOTH.,#52598); +#52598 = SURFACE_SIDE_STYLE('',(#52599)); +#52599 = SURFACE_STYLE_FILL_AREA(#52600); +#52600 = FILL_AREA_STYLE('',(#52601)); +#52601 = FILL_AREA_STYLE_COLOUR('',#50655); +#52602 = STYLED_ITEM('color',(#52603),#39862); +#52603 = PRESENTATION_STYLE_ASSIGNMENT((#52604)); +#52604 = SURFACE_STYLE_USAGE(.BOTH.,#52605); +#52605 = SURFACE_SIDE_STYLE('',(#52606)); +#52606 = SURFACE_STYLE_FILL_AREA(#52607); +#52607 = FILL_AREA_STYLE('',(#52608)); +#52608 = FILL_AREA_STYLE_COLOUR('',#50655); +#52609 = STYLED_ITEM('color',(#52610),#39889); +#52610 = PRESENTATION_STYLE_ASSIGNMENT((#52611)); +#52611 = SURFACE_STYLE_USAGE(.BOTH.,#52612); +#52612 = SURFACE_SIDE_STYLE('',(#52613)); +#52613 = SURFACE_STYLE_FILL_AREA(#52614); +#52614 = FILL_AREA_STYLE('',(#52615)); +#52615 = FILL_AREA_STYLE_COLOUR('',#50655); +#52616 = STYLED_ITEM('color',(#52617),#39916); +#52617 = PRESENTATION_STYLE_ASSIGNMENT((#52618)); +#52618 = SURFACE_STYLE_USAGE(.BOTH.,#52619); +#52619 = SURFACE_SIDE_STYLE('',(#52620)); +#52620 = SURFACE_STYLE_FILL_AREA(#52621); +#52621 = FILL_AREA_STYLE('',(#52622)); +#52622 = FILL_AREA_STYLE_COLOUR('',#50655); +#52623 = STYLED_ITEM('color',(#52624),#39943); +#52624 = PRESENTATION_STYLE_ASSIGNMENT((#52625)); +#52625 = SURFACE_STYLE_USAGE(.BOTH.,#52626); +#52626 = SURFACE_SIDE_STYLE('',(#52627)); +#52627 = SURFACE_STYLE_FILL_AREA(#52628); +#52628 = FILL_AREA_STYLE('',(#52629)); +#52629 = FILL_AREA_STYLE_COLOUR('',#50655); +#52630 = STYLED_ITEM('color',(#52631),#39970); +#52631 = PRESENTATION_STYLE_ASSIGNMENT((#52632)); +#52632 = SURFACE_STYLE_USAGE(.BOTH.,#52633); +#52633 = SURFACE_SIDE_STYLE('',(#52634)); +#52634 = SURFACE_STYLE_FILL_AREA(#52635); +#52635 = FILL_AREA_STYLE('',(#52636)); +#52636 = FILL_AREA_STYLE_COLOUR('',#50655); +#52637 = STYLED_ITEM('color',(#52638),#39997); +#52638 = PRESENTATION_STYLE_ASSIGNMENT((#52639)); +#52639 = SURFACE_STYLE_USAGE(.BOTH.,#52640); +#52640 = SURFACE_SIDE_STYLE('',(#52641)); +#52641 = SURFACE_STYLE_FILL_AREA(#52642); +#52642 = FILL_AREA_STYLE('',(#52643)); +#52643 = FILL_AREA_STYLE_COLOUR('',#50655); +#52644 = STYLED_ITEM('color',(#52645),#40004); +#52645 = PRESENTATION_STYLE_ASSIGNMENT((#52646)); +#52646 = SURFACE_STYLE_USAGE(.BOTH.,#52647); +#52647 = SURFACE_SIDE_STYLE('',(#52648)); +#52648 = SURFACE_STYLE_FILL_AREA(#52649); +#52649 = FILL_AREA_STYLE('',(#52650)); +#52650 = FILL_AREA_STYLE_COLOUR('',#50655); +#52651 = STYLED_ITEM('color',(#52652),#40031); +#52652 = PRESENTATION_STYLE_ASSIGNMENT((#52653)); +#52653 = SURFACE_STYLE_USAGE(.BOTH.,#52654); +#52654 = SURFACE_SIDE_STYLE('',(#52655)); +#52655 = SURFACE_STYLE_FILL_AREA(#52656); +#52656 = FILL_AREA_STYLE('',(#52657)); +#52657 = FILL_AREA_STYLE_COLOUR('',#50655); +#52658 = STYLED_ITEM('color',(#52659),#40058); +#52659 = PRESENTATION_STYLE_ASSIGNMENT((#52660)); +#52660 = SURFACE_STYLE_USAGE(.BOTH.,#52661); +#52661 = SURFACE_SIDE_STYLE('',(#52662)); +#52662 = SURFACE_STYLE_FILL_AREA(#52663); +#52663 = FILL_AREA_STYLE('',(#52664)); +#52664 = FILL_AREA_STYLE_COLOUR('',#50655); +#52665 = STYLED_ITEM('color',(#52666),#40085); +#52666 = PRESENTATION_STYLE_ASSIGNMENT((#52667)); +#52667 = SURFACE_STYLE_USAGE(.BOTH.,#52668); +#52668 = SURFACE_SIDE_STYLE('',(#52669)); +#52669 = SURFACE_STYLE_FILL_AREA(#52670); +#52670 = FILL_AREA_STYLE('',(#52671)); +#52671 = FILL_AREA_STYLE_COLOUR('',#50655); +#52672 = STYLED_ITEM('color',(#52673),#40112); +#52673 = PRESENTATION_STYLE_ASSIGNMENT((#52674)); +#52674 = SURFACE_STYLE_USAGE(.BOTH.,#52675); +#52675 = SURFACE_SIDE_STYLE('',(#52676)); +#52676 = SURFACE_STYLE_FILL_AREA(#52677); +#52677 = FILL_AREA_STYLE('',(#52678)); +#52678 = FILL_AREA_STYLE_COLOUR('',#50655); +#52679 = STYLED_ITEM('color',(#52680),#40139); +#52680 = PRESENTATION_STYLE_ASSIGNMENT((#52681)); +#52681 = SURFACE_STYLE_USAGE(.BOTH.,#52682); +#52682 = SURFACE_SIDE_STYLE('',(#52683)); +#52683 = SURFACE_STYLE_FILL_AREA(#52684); +#52684 = FILL_AREA_STYLE('',(#52685)); +#52685 = FILL_AREA_STYLE_COLOUR('',#50655); +#52686 = STYLED_ITEM('color',(#52687),#40166); +#52687 = PRESENTATION_STYLE_ASSIGNMENT((#52688)); +#52688 = SURFACE_STYLE_USAGE(.BOTH.,#52689); +#52689 = SURFACE_SIDE_STYLE('',(#52690)); +#52690 = SURFACE_STYLE_FILL_AREA(#52691); +#52691 = FILL_AREA_STYLE('',(#52692)); +#52692 = FILL_AREA_STYLE_COLOUR('',#50655); +#52693 = STYLED_ITEM('color',(#52694),#40193); +#52694 = PRESENTATION_STYLE_ASSIGNMENT((#52695)); +#52695 = SURFACE_STYLE_USAGE(.BOTH.,#52696); +#52696 = SURFACE_SIDE_STYLE('',(#52697)); +#52697 = SURFACE_STYLE_FILL_AREA(#52698); +#52698 = FILL_AREA_STYLE('',(#52699)); +#52699 = FILL_AREA_STYLE_COLOUR('',#50655); +#52700 = STYLED_ITEM('color',(#52701),#40200); +#52701 = PRESENTATION_STYLE_ASSIGNMENT((#52702)); +#52702 = SURFACE_STYLE_USAGE(.BOTH.,#52703); +#52703 = SURFACE_SIDE_STYLE('',(#52704)); +#52704 = SURFACE_STYLE_FILL_AREA(#52705); +#52705 = FILL_AREA_STYLE('',(#52706)); +#52706 = FILL_AREA_STYLE_COLOUR('',#50655); +#52707 = STYLED_ITEM('color',(#52708),#40227); +#52708 = PRESENTATION_STYLE_ASSIGNMENT((#52709)); +#52709 = SURFACE_STYLE_USAGE(.BOTH.,#52710); +#52710 = SURFACE_SIDE_STYLE('',(#52711)); +#52711 = SURFACE_STYLE_FILL_AREA(#52712); +#52712 = FILL_AREA_STYLE('',(#52713)); +#52713 = FILL_AREA_STYLE_COLOUR('',#50655); +#52714 = STYLED_ITEM('color',(#52715),#40254); +#52715 = PRESENTATION_STYLE_ASSIGNMENT((#52716)); +#52716 = SURFACE_STYLE_USAGE(.BOTH.,#52717); +#52717 = SURFACE_SIDE_STYLE('',(#52718)); +#52718 = SURFACE_STYLE_FILL_AREA(#52719); +#52719 = FILL_AREA_STYLE('',(#52720)); +#52720 = FILL_AREA_STYLE_COLOUR('',#50655); +#52721 = STYLED_ITEM('color',(#52722),#40281); +#52722 = PRESENTATION_STYLE_ASSIGNMENT((#52723)); +#52723 = SURFACE_STYLE_USAGE(.BOTH.,#52724); +#52724 = SURFACE_SIDE_STYLE('',(#52725)); +#52725 = SURFACE_STYLE_FILL_AREA(#52726); +#52726 = FILL_AREA_STYLE('',(#52727)); +#52727 = FILL_AREA_STYLE_COLOUR('',#50655); +#52728 = STYLED_ITEM('color',(#52729),#40308); +#52729 = PRESENTATION_STYLE_ASSIGNMENT((#52730)); +#52730 = SURFACE_STYLE_USAGE(.BOTH.,#52731); +#52731 = SURFACE_SIDE_STYLE('',(#52732)); +#52732 = SURFACE_STYLE_FILL_AREA(#52733); +#52733 = FILL_AREA_STYLE('',(#52734)); +#52734 = FILL_AREA_STYLE_COLOUR('',#50655); +#52735 = STYLED_ITEM('color',(#52736),#40335); +#52736 = PRESENTATION_STYLE_ASSIGNMENT((#52737)); +#52737 = SURFACE_STYLE_USAGE(.BOTH.,#52738); +#52738 = SURFACE_SIDE_STYLE('',(#52739)); +#52739 = SURFACE_STYLE_FILL_AREA(#52740); +#52740 = FILL_AREA_STYLE('',(#52741)); +#52741 = FILL_AREA_STYLE_COLOUR('',#50655); +#52742 = STYLED_ITEM('color',(#52743),#40362); +#52743 = PRESENTATION_STYLE_ASSIGNMENT((#52744)); +#52744 = SURFACE_STYLE_USAGE(.BOTH.,#52745); +#52745 = SURFACE_SIDE_STYLE('',(#52746)); +#52746 = SURFACE_STYLE_FILL_AREA(#52747); +#52747 = FILL_AREA_STYLE('',(#52748)); +#52748 = FILL_AREA_STYLE_COLOUR('',#50655); +#52749 = STYLED_ITEM('color',(#52750),#40389); +#52750 = PRESENTATION_STYLE_ASSIGNMENT((#52751)); +#52751 = SURFACE_STYLE_USAGE(.BOTH.,#52752); +#52752 = SURFACE_SIDE_STYLE('',(#52753)); +#52753 = SURFACE_STYLE_FILL_AREA(#52754); +#52754 = FILL_AREA_STYLE('',(#52755)); +#52755 = FILL_AREA_STYLE_COLOUR('',#50655); +#52756 = STYLED_ITEM('color',(#52757),#40396); +#52757 = PRESENTATION_STYLE_ASSIGNMENT((#52758)); +#52758 = SURFACE_STYLE_USAGE(.BOTH.,#52759); +#52759 = SURFACE_SIDE_STYLE('',(#52760)); +#52760 = SURFACE_STYLE_FILL_AREA(#52761); +#52761 = FILL_AREA_STYLE('',(#52762)); +#52762 = FILL_AREA_STYLE_COLOUR('',#50655); +#52763 = STYLED_ITEM('color',(#52764),#40423); +#52764 = PRESENTATION_STYLE_ASSIGNMENT((#52765)); +#52765 = SURFACE_STYLE_USAGE(.BOTH.,#52766); +#52766 = SURFACE_SIDE_STYLE('',(#52767)); +#52767 = SURFACE_STYLE_FILL_AREA(#52768); +#52768 = FILL_AREA_STYLE('',(#52769)); +#52769 = FILL_AREA_STYLE_COLOUR('',#50655); +#52770 = STYLED_ITEM('color',(#52771),#40450); +#52771 = PRESENTATION_STYLE_ASSIGNMENT((#52772)); +#52772 = SURFACE_STYLE_USAGE(.BOTH.,#52773); +#52773 = SURFACE_SIDE_STYLE('',(#52774)); +#52774 = SURFACE_STYLE_FILL_AREA(#52775); +#52775 = FILL_AREA_STYLE('',(#52776)); +#52776 = FILL_AREA_STYLE_COLOUR('',#50655); +#52777 = STYLED_ITEM('color',(#52778),#40477); +#52778 = PRESENTATION_STYLE_ASSIGNMENT((#52779)); +#52779 = SURFACE_STYLE_USAGE(.BOTH.,#52780); +#52780 = SURFACE_SIDE_STYLE('',(#52781)); +#52781 = SURFACE_STYLE_FILL_AREA(#52782); +#52782 = FILL_AREA_STYLE('',(#52783)); +#52783 = FILL_AREA_STYLE_COLOUR('',#50655); +#52784 = STYLED_ITEM('color',(#52785),#40504); +#52785 = PRESENTATION_STYLE_ASSIGNMENT((#52786)); +#52786 = SURFACE_STYLE_USAGE(.BOTH.,#52787); +#52787 = SURFACE_SIDE_STYLE('',(#52788)); +#52788 = SURFACE_STYLE_FILL_AREA(#52789); +#52789 = FILL_AREA_STYLE('',(#52790)); +#52790 = FILL_AREA_STYLE_COLOUR('',#50655); +#52791 = STYLED_ITEM('color',(#52792),#40531); +#52792 = PRESENTATION_STYLE_ASSIGNMENT((#52793)); +#52793 = SURFACE_STYLE_USAGE(.BOTH.,#52794); +#52794 = SURFACE_SIDE_STYLE('',(#52795)); +#52795 = SURFACE_STYLE_FILL_AREA(#52796); +#52796 = FILL_AREA_STYLE('',(#52797)); +#52797 = FILL_AREA_STYLE_COLOUR('',#50655); +#52798 = STYLED_ITEM('color',(#52799),#40558); +#52799 = PRESENTATION_STYLE_ASSIGNMENT((#52800)); +#52800 = SURFACE_STYLE_USAGE(.BOTH.,#52801); +#52801 = SURFACE_SIDE_STYLE('',(#52802)); +#52802 = SURFACE_STYLE_FILL_AREA(#52803); +#52803 = FILL_AREA_STYLE('',(#52804)); +#52804 = FILL_AREA_STYLE_COLOUR('',#50655); +#52805 = STYLED_ITEM('color',(#52806),#40585); +#52806 = PRESENTATION_STYLE_ASSIGNMENT((#52807)); +#52807 = SURFACE_STYLE_USAGE(.BOTH.,#52808); +#52808 = SURFACE_SIDE_STYLE('',(#52809)); +#52809 = SURFACE_STYLE_FILL_AREA(#52810); +#52810 = FILL_AREA_STYLE('',(#52811)); +#52811 = FILL_AREA_STYLE_COLOUR('',#50655); +#52812 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #52813,#52820,#52827,#52834,#52841,#52848,#52855,#52862,#52870, + #52877,#52884,#52891,#52898,#52905,#52913,#52920,#52927,#52934, + #52941,#52948,#52955,#52962,#52969,#52976,#52983,#52990),#22083); +#52813 = STYLED_ITEM('color',(#52814),#20243); +#52814 = PRESENTATION_STYLE_ASSIGNMENT((#52815)); +#52815 = SURFACE_STYLE_USAGE(.BOTH.,#52816); +#52816 = SURFACE_SIDE_STYLE('',(#52817)); +#52817 = SURFACE_STYLE_FILL_AREA(#52818); +#52818 = FILL_AREA_STYLE('',(#52819)); +#52819 = FILL_AREA_STYLE_COLOUR('',#51145); +#52820 = STYLED_ITEM('color',(#52821),#20363); +#52821 = PRESENTATION_STYLE_ASSIGNMENT((#52822)); +#52822 = SURFACE_STYLE_USAGE(.BOTH.,#52823); +#52823 = SURFACE_SIDE_STYLE('',(#52824)); +#52824 = SURFACE_STYLE_FILL_AREA(#52825); +#52825 = FILL_AREA_STYLE('',(#52826)); +#52826 = FILL_AREA_STYLE_COLOUR('',#51145); +#52827 = STYLED_ITEM('color',(#52828),#20609); +#52828 = PRESENTATION_STYLE_ASSIGNMENT((#52829)); +#52829 = SURFACE_STYLE_USAGE(.BOTH.,#52830); +#52830 = SURFACE_SIDE_STYLE('',(#52831)); +#52831 = SURFACE_STYLE_FILL_AREA(#52832); +#52832 = FILL_AREA_STYLE('',(#52833)); +#52833 = FILL_AREA_STYLE_COLOUR('',#51145); +#52834 = STYLED_ITEM('color',(#52835),#20663); +#52835 = PRESENTATION_STYLE_ASSIGNMENT((#52836)); +#52836 = SURFACE_STYLE_USAGE(.BOTH.,#52837); +#52837 = SURFACE_SIDE_STYLE('',(#52838)); +#52838 = SURFACE_STYLE_FILL_AREA(#52839); +#52839 = FILL_AREA_STYLE('',(#52840)); +#52840 = FILL_AREA_STYLE_COLOUR('',#51145); +#52841 = STYLED_ITEM('color',(#52842),#20713); +#52842 = PRESENTATION_STYLE_ASSIGNMENT((#52843)); +#52843 = SURFACE_STYLE_USAGE(.BOTH.,#52844); +#52844 = SURFACE_SIDE_STYLE('',(#52845)); +#52845 = SURFACE_STYLE_FILL_AREA(#52846); +#52846 = FILL_AREA_STYLE('',(#52847)); +#52847 = FILL_AREA_STYLE_COLOUR('',#51145); +#52848 = STYLED_ITEM('color',(#52849),#20889); +#52849 = PRESENTATION_STYLE_ASSIGNMENT((#52850)); +#52850 = SURFACE_STYLE_USAGE(.BOTH.,#52851); +#52851 = SURFACE_SIDE_STYLE('',(#52852)); +#52852 = SURFACE_STYLE_FILL_AREA(#52853); +#52853 = FILL_AREA_STYLE('',(#52854)); +#52854 = FILL_AREA_STYLE_COLOUR('',#51145); +#52855 = STYLED_ITEM('color',(#52856),#20916); +#52856 = PRESENTATION_STYLE_ASSIGNMENT((#52857)); +#52857 = SURFACE_STYLE_USAGE(.BOTH.,#52858); +#52858 = SURFACE_SIDE_STYLE('',(#52859)); +#52859 = SURFACE_STYLE_FILL_AREA(#52860); +#52860 = FILL_AREA_STYLE('',(#52861)); +#52861 = FILL_AREA_STYLE_COLOUR('',#51145); +#52862 = STYLED_ITEM('color',(#52863),#20948); +#52863 = PRESENTATION_STYLE_ASSIGNMENT((#52864)); +#52864 = SURFACE_STYLE_USAGE(.BOTH.,#52865); +#52865 = SURFACE_SIDE_STYLE('',(#52866)); +#52866 = SURFACE_STYLE_FILL_AREA(#52867); +#52867 = FILL_AREA_STYLE('',(#52868)); +#52868 = FILL_AREA_STYLE_COLOUR('',#52869); +#52869 = COLOUR_RGB('',0.894999966383,0.890999961016,0.813000030345); +#52870 = STYLED_ITEM('color',(#52871),#21077); +#52871 = PRESENTATION_STYLE_ASSIGNMENT((#52872)); +#52872 = SURFACE_STYLE_USAGE(.BOTH.,#52873); +#52873 = SURFACE_SIDE_STYLE('',(#52874)); +#52874 = SURFACE_STYLE_FILL_AREA(#52875); +#52875 = FILL_AREA_STYLE('',(#52876)); +#52876 = FILL_AREA_STYLE_COLOUR('',#51145); +#52877 = STYLED_ITEM('color',(#52878),#21104); +#52878 = PRESENTATION_STYLE_ASSIGNMENT((#52879)); +#52879 = SURFACE_STYLE_USAGE(.BOTH.,#52880); +#52880 = SURFACE_SIDE_STYLE('',(#52881)); +#52881 = SURFACE_STYLE_FILL_AREA(#52882); +#52882 = FILL_AREA_STYLE('',(#52883)); +#52883 = FILL_AREA_STYLE_COLOUR('',#51145); +#52884 = STYLED_ITEM('color',(#52885),#21136); +#52885 = PRESENTATION_STYLE_ASSIGNMENT((#52886)); +#52886 = SURFACE_STYLE_USAGE(.BOTH.,#52887); +#52887 = SURFACE_SIDE_STYLE('',(#52888)); +#52888 = SURFACE_STYLE_FILL_AREA(#52889); +#52889 = FILL_AREA_STYLE('',(#52890)); +#52890 = FILL_AREA_STYLE_COLOUR('',#52869); +#52891 = STYLED_ITEM('color',(#52892),#21265); +#52892 = PRESENTATION_STYLE_ASSIGNMENT((#52893)); +#52893 = SURFACE_STYLE_USAGE(.BOTH.,#52894); +#52894 = SURFACE_SIDE_STYLE('',(#52895)); +#52895 = SURFACE_STYLE_FILL_AREA(#52896); +#52896 = FILL_AREA_STYLE('',(#52897)); +#52897 = FILL_AREA_STYLE_COLOUR('',#52869); +#52898 = STYLED_ITEM('color',(#52899),#21297); +#52899 = PRESENTATION_STYLE_ASSIGNMENT((#52900)); +#52900 = SURFACE_STYLE_USAGE(.BOTH.,#52901); +#52901 = SURFACE_SIDE_STYLE('',(#52902)); +#52902 = SURFACE_STYLE_FILL_AREA(#52903); +#52903 = FILL_AREA_STYLE('',(#52904)); +#52904 = FILL_AREA_STYLE_COLOUR('',#51145); +#52905 = STYLED_ITEM('color',(#52906),#21504); +#52906 = PRESENTATION_STYLE_ASSIGNMENT((#52907)); +#52907 = SURFACE_STYLE_USAGE(.BOTH.,#52908); +#52908 = SURFACE_SIDE_STYLE('',(#52909)); +#52909 = SURFACE_STYLE_FILL_AREA(#52910); +#52910 = FILL_AREA_STYLE('',(#52911)); +#52911 = FILL_AREA_STYLE_COLOUR('',#52912); +#52912 = COLOUR_RGB('',8.200000279077E-02,8.600000121357E-02, + 9.399999706163E-02); +#52913 = STYLED_ITEM('color',(#52914),#21585); +#52914 = PRESENTATION_STYLE_ASSIGNMENT((#52915)); +#52915 = SURFACE_STYLE_USAGE(.BOTH.,#52916); +#52916 = SURFACE_SIDE_STYLE('',(#52917)); +#52917 = SURFACE_STYLE_FILL_AREA(#52918); +#52918 = FILL_AREA_STYLE('',(#52919)); +#52919 = FILL_AREA_STYLE_COLOUR('',#52912); +#52920 = STYLED_ITEM('color',(#52921),#21634); +#52921 = PRESENTATION_STYLE_ASSIGNMENT((#52922)); +#52922 = SURFACE_STYLE_USAGE(.BOTH.,#52923); +#52923 = SURFACE_SIDE_STYLE('',(#52924)); +#52924 = SURFACE_STYLE_FILL_AREA(#52925); +#52925 = FILL_AREA_STYLE('',(#52926)); +#52926 = FILL_AREA_STYLE_COLOUR('',#51145); +#52927 = STYLED_ITEM('color',(#52928),#21811); +#52928 = PRESENTATION_STYLE_ASSIGNMENT((#52929)); +#52929 = SURFACE_STYLE_USAGE(.BOTH.,#52930); +#52930 = SURFACE_SIDE_STYLE('',(#52931)); +#52931 = SURFACE_STYLE_FILL_AREA(#52932); +#52932 = FILL_AREA_STYLE('',(#52933)); +#52933 = FILL_AREA_STYLE_COLOUR('',#52912); +#52934 = STYLED_ITEM('color',(#52935),#21860); +#52935 = PRESENTATION_STYLE_ASSIGNMENT((#52936)); +#52936 = SURFACE_STYLE_USAGE(.BOTH.,#52937); +#52937 = SURFACE_SIDE_STYLE('',(#52938)); +#52938 = SURFACE_STYLE_FILL_AREA(#52939); +#52939 = FILL_AREA_STYLE('',(#52940)); +#52940 = FILL_AREA_STYLE_COLOUR('',#51145); +#52941 = STYLED_ITEM('color',(#52942),#21887); +#52942 = PRESENTATION_STYLE_ASSIGNMENT((#52943)); +#52943 = SURFACE_STYLE_USAGE(.BOTH.,#52944); +#52944 = SURFACE_SIDE_STYLE('',(#52945)); +#52945 = SURFACE_STYLE_FILL_AREA(#52946); +#52946 = FILL_AREA_STYLE('',(#52947)); +#52947 = FILL_AREA_STYLE_COLOUR('',#51145); +#52948 = STYLED_ITEM('color',(#52949),#21914); +#52949 = PRESENTATION_STYLE_ASSIGNMENT((#52950)); +#52950 = SURFACE_STYLE_USAGE(.BOTH.,#52951); +#52951 = SURFACE_SIDE_STYLE('',(#52952)); +#52952 = SURFACE_STYLE_FILL_AREA(#52953); +#52953 = FILL_AREA_STYLE('',(#52954)); +#52954 = FILL_AREA_STYLE_COLOUR('',#51145); +#52955 = STYLED_ITEM('color',(#52956),#21941); +#52956 = PRESENTATION_STYLE_ASSIGNMENT((#52957)); +#52957 = SURFACE_STYLE_USAGE(.BOTH.,#52958); +#52958 = SURFACE_SIDE_STYLE('',(#52959)); +#52959 = SURFACE_STYLE_FILL_AREA(#52960); +#52960 = FILL_AREA_STYLE('',(#52961)); +#52961 = FILL_AREA_STYLE_COLOUR('',#51145); +#52962 = STYLED_ITEM('color',(#52963),#21968); +#52963 = PRESENTATION_STYLE_ASSIGNMENT((#52964)); +#52964 = SURFACE_STYLE_USAGE(.BOTH.,#52965); +#52965 = SURFACE_SIDE_STYLE('',(#52966)); +#52966 = SURFACE_STYLE_FILL_AREA(#52967); +#52967 = FILL_AREA_STYLE('',(#52968)); +#52968 = FILL_AREA_STYLE_COLOUR('',#51145); +#52969 = STYLED_ITEM('color',(#52970),#21995); +#52970 = PRESENTATION_STYLE_ASSIGNMENT((#52971)); +#52971 = SURFACE_STYLE_USAGE(.BOTH.,#52972); +#52972 = SURFACE_SIDE_STYLE('',(#52973)); +#52973 = SURFACE_STYLE_FILL_AREA(#52974); +#52974 = FILL_AREA_STYLE('',(#52975)); +#52975 = FILL_AREA_STYLE_COLOUR('',#51145); +#52976 = STYLED_ITEM('color',(#52977),#22022); +#52977 = PRESENTATION_STYLE_ASSIGNMENT((#52978)); +#52978 = SURFACE_STYLE_USAGE(.BOTH.,#52979); +#52979 = SURFACE_SIDE_STYLE('',(#52980)); +#52980 = SURFACE_STYLE_FILL_AREA(#52981); +#52981 = FILL_AREA_STYLE('',(#52982)); +#52982 = FILL_AREA_STYLE_COLOUR('',#51145); +#52983 = STYLED_ITEM('color',(#52984),#22049); +#52984 = PRESENTATION_STYLE_ASSIGNMENT((#52985)); +#52985 = SURFACE_STYLE_USAGE(.BOTH.,#52986); +#52986 = SURFACE_SIDE_STYLE('',(#52987)); +#52987 = SURFACE_STYLE_FILL_AREA(#52988); +#52988 = FILL_AREA_STYLE('',(#52989)); +#52989 = FILL_AREA_STYLE_COLOUR('',#52912); +#52990 = STYLED_ITEM('color',(#52991),#22076); +#52991 = PRESENTATION_STYLE_ASSIGNMENT((#52992)); +#52992 = SURFACE_STYLE_USAGE(.BOTH.,#52993); +#52993 = SURFACE_SIDE_STYLE('',(#52994)); +#52994 = SURFACE_STYLE_FILL_AREA(#52995); +#52995 = FILL_AREA_STYLE('',(#52996)); +#52996 = FILL_AREA_STYLE_COLOUR('',#52912); +#52997 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',( + #52998,#53005,#53012,#53019,#53026,#53033,#53040,#53047,#53054, + #53061,#53068,#53075,#53082,#53089,#53096,#53103,#53110,#53117, + #53124,#53131,#53138,#53145,#53152,#53159,#53166,#53173,#53180, + #53187,#53194,#53201,#53208,#53215,#53222,#53229,#53236,#53243, + #53250,#53257,#53264,#53271,#53278,#53285,#53292,#53299,#53306, + #53313,#53320,#53327,#53334,#53341,#53348,#53355,#53362,#53369, + #53376,#53383,#53390,#53397,#53404,#53411,#53418,#53425,#53432, + #53439,#53446,#53453,#53460,#53467,#53474,#53481,#53488,#53495, + #53502,#53509,#53516,#53523,#53530,#53537,#53544,#53551,#53558, + #53565,#53572,#53579,#53586,#53593,#53600,#53607,#53614,#53621, + #53628,#53635,#53642,#53649,#53656,#53663,#53670,#53677,#53684, + #53691,#53698,#53705,#53712,#53719,#53726,#53733,#53740,#53747, + #53754,#53761,#53768,#53775,#53782,#53789,#53796,#53803,#53810, + #53817,#53824,#53831,#53838,#53845,#53852,#53859,#53866,#53873, + #53880,#53887,#53894,#53901,#53908,#53915,#53922,#53929,#53936, + #53943,#53950,#53957,#53964,#53971,#53978,#53985,#53992,#53999, + #54006,#54013,#54020,#54027,#54034,#54041,#54048,#54055,#54062, + #54069,#54076,#54083,#54090,#54097,#54104,#54111,#54118,#54125, + #54132,#54139,#54146,#54153,#54160,#54167,#54174,#54181,#54188, + #54195,#54202,#54209,#54216,#54223,#54230,#54237,#54244,#54251, + #54258,#54265,#54272,#54279,#54286,#54293,#54300,#54307,#54314, + #54321,#54328,#54335,#54342,#54349,#54356,#54363,#54370,#54377, + #54384,#54391,#54398,#54405,#54412,#54419,#54426,#54433,#54440, + #54447,#54454,#54461,#54468,#54475,#54482,#54489,#54496,#54503, + #54510,#54517,#54524,#54531,#54538,#54545,#54552,#54559,#54566, + #54573,#54580,#54587,#54594,#54601,#54608,#54615,#54622,#54629, + #54636,#54643,#54650,#54657,#54664,#54671,#54678,#54685,#54692, + #54699,#54706,#54713),#19571); +#52998 = STYLED_ITEM('color',(#52999),#2287); +#52999 = PRESENTATION_STYLE_ASSIGNMENT((#53000)); +#53000 = SURFACE_STYLE_USAGE(.BOTH.,#53001); +#53001 = SURFACE_SIDE_STYLE('',(#53002)); +#53002 = SURFACE_STYLE_FILL_AREA(#53003); +#53003 = FILL_AREA_STYLE('',(#53004)); +#53004 = FILL_AREA_STYLE_COLOUR('',#50655); +#53005 = STYLED_ITEM('color',(#53006),#2417); +#53006 = PRESENTATION_STYLE_ASSIGNMENT((#53007)); +#53007 = SURFACE_STYLE_USAGE(.BOTH.,#53008); +#53008 = SURFACE_SIDE_STYLE('',(#53009)); +#53009 = SURFACE_STYLE_FILL_AREA(#53010); +#53010 = FILL_AREA_STYLE('',(#53011)); +#53011 = FILL_AREA_STYLE_COLOUR('',#50655); +#53012 = STYLED_ITEM('color',(#53013),#2493); +#53013 = PRESENTATION_STYLE_ASSIGNMENT((#53014)); +#53014 = SURFACE_STYLE_USAGE(.BOTH.,#53015); +#53015 = SURFACE_SIDE_STYLE('',(#53016)); +#53016 = SURFACE_STYLE_FILL_AREA(#53017); +#53017 = FILL_AREA_STYLE('',(#53018)); +#53018 = FILL_AREA_STYLE_COLOUR('',#50655); +#53019 = STYLED_ITEM('color',(#53020),#2569); +#53020 = PRESENTATION_STYLE_ASSIGNMENT((#53021)); +#53021 = SURFACE_STYLE_USAGE(.BOTH.,#53022); +#53022 = SURFACE_SIDE_STYLE('',(#53023)); +#53023 = SURFACE_STYLE_FILL_AREA(#53024); +#53024 = FILL_AREA_STYLE('',(#53025)); +#53025 = FILL_AREA_STYLE_COLOUR('',#50655); +#53026 = STYLED_ITEM('color',(#53027),#2827); +#53027 = PRESENTATION_STYLE_ASSIGNMENT((#53028)); +#53028 = SURFACE_STYLE_USAGE(.BOTH.,#53029); +#53029 = SURFACE_SIDE_STYLE('',(#53030)); +#53030 = SURFACE_STYLE_FILL_AREA(#53031); +#53031 = FILL_AREA_STYLE('',(#53032)); +#53032 = FILL_AREA_STYLE_COLOUR('',#50655); +#53033 = STYLED_ITEM('color',(#53034),#3050); +#53034 = PRESENTATION_STYLE_ASSIGNMENT((#53035)); +#53035 = SURFACE_STYLE_USAGE(.BOTH.,#53036); +#53036 = SURFACE_SIDE_STYLE('',(#53037)); +#53037 = SURFACE_STYLE_FILL_AREA(#53038); +#53038 = FILL_AREA_STYLE('',(#53039)); +#53039 = FILL_AREA_STYLE_COLOUR('',#50691); +#53040 = STYLED_ITEM('color',(#53041),#3515); +#53041 = PRESENTATION_STYLE_ASSIGNMENT((#53042)); +#53042 = SURFACE_STYLE_USAGE(.BOTH.,#53043); +#53043 = SURFACE_SIDE_STYLE('',(#53044)); +#53044 = SURFACE_STYLE_FILL_AREA(#53045); +#53045 = FILL_AREA_STYLE('',(#53046)); +#53046 = FILL_AREA_STYLE_COLOUR('',#50655); +#53047 = STYLED_ITEM('color',(#53048),#3542); +#53048 = PRESENTATION_STYLE_ASSIGNMENT((#53049)); +#53049 = SURFACE_STYLE_USAGE(.BOTH.,#53050); +#53050 = SURFACE_SIDE_STYLE('',(#53051)); +#53051 = SURFACE_STYLE_FILL_AREA(#53052); +#53052 = FILL_AREA_STYLE('',(#53053)); +#53053 = FILL_AREA_STYLE_COLOUR('',#50691); +#53054 = STYLED_ITEM('color',(#53055),#3598); +#53055 = PRESENTATION_STYLE_ASSIGNMENT((#53056)); +#53056 = SURFACE_STYLE_USAGE(.BOTH.,#53057); +#53057 = SURFACE_SIDE_STYLE('',(#53058)); +#53058 = SURFACE_STYLE_FILL_AREA(#53059); +#53059 = FILL_AREA_STYLE('',(#53060)); +#53060 = FILL_AREA_STYLE_COLOUR('',#50655); +#53061 = STYLED_ITEM('color',(#53062),#3699); +#53062 = PRESENTATION_STYLE_ASSIGNMENT((#53063)); +#53063 = SURFACE_STYLE_USAGE(.BOTH.,#53064); +#53064 = SURFACE_SIDE_STYLE('',(#53065)); +#53065 = SURFACE_STYLE_FILL_AREA(#53066); +#53066 = FILL_AREA_STYLE('',(#53067)); +#53067 = FILL_AREA_STYLE_COLOUR('',#50655); +#53068 = STYLED_ITEM('color',(#53069),#3726); +#53069 = PRESENTATION_STYLE_ASSIGNMENT((#53070)); +#53070 = SURFACE_STYLE_USAGE(.BOTH.,#53071); +#53071 = SURFACE_SIDE_STYLE('',(#53072)); +#53072 = SURFACE_STYLE_FILL_AREA(#53073); +#53073 = FILL_AREA_STYLE('',(#53074)); +#53074 = FILL_AREA_STYLE_COLOUR('',#50655); +#53075 = STYLED_ITEM('color',(#53076),#3753); +#53076 = PRESENTATION_STYLE_ASSIGNMENT((#53077)); +#53077 = SURFACE_STYLE_USAGE(.BOTH.,#53078); +#53078 = SURFACE_SIDE_STYLE('',(#53079)); +#53079 = SURFACE_STYLE_FILL_AREA(#53080); +#53080 = FILL_AREA_STYLE('',(#53081)); +#53081 = FILL_AREA_STYLE_COLOUR('',#50655); +#53082 = STYLED_ITEM('color',(#53083),#3780); +#53083 = PRESENTATION_STYLE_ASSIGNMENT((#53084)); +#53084 = SURFACE_STYLE_USAGE(.BOTH.,#53085); +#53085 = SURFACE_SIDE_STYLE('',(#53086)); +#53086 = SURFACE_STYLE_FILL_AREA(#53087); +#53087 = FILL_AREA_STYLE('',(#53088)); +#53088 = FILL_AREA_STYLE_COLOUR('',#50655); +#53089 = STYLED_ITEM('color',(#53090),#3807); +#53090 = PRESENTATION_STYLE_ASSIGNMENT((#53091)); +#53091 = SURFACE_STYLE_USAGE(.BOTH.,#53092); +#53092 = SURFACE_SIDE_STYLE('',(#53093)); +#53093 = SURFACE_STYLE_FILL_AREA(#53094); +#53094 = FILL_AREA_STYLE('',(#53095)); +#53095 = FILL_AREA_STYLE_COLOUR('',#50655); +#53096 = STYLED_ITEM('color',(#53097),#3834); +#53097 = PRESENTATION_STYLE_ASSIGNMENT((#53098)); +#53098 = SURFACE_STYLE_USAGE(.BOTH.,#53099); +#53099 = SURFACE_SIDE_STYLE('',(#53100)); +#53100 = SURFACE_STYLE_FILL_AREA(#53101); +#53101 = FILL_AREA_STYLE('',(#53102)); +#53102 = FILL_AREA_STYLE_COLOUR('',#50655); +#53103 = STYLED_ITEM('color',(#53104),#3841); +#53104 = PRESENTATION_STYLE_ASSIGNMENT((#53105)); +#53105 = SURFACE_STYLE_USAGE(.BOTH.,#53106); +#53106 = SURFACE_SIDE_STYLE('',(#53107)); +#53107 = SURFACE_STYLE_FILL_AREA(#53108); +#53108 = FILL_AREA_STYLE('',(#53109)); +#53109 = FILL_AREA_STYLE_COLOUR('',#50691); +#53110 = STYLED_ITEM('color',(#53111),#3895); +#53111 = PRESENTATION_STYLE_ASSIGNMENT((#53112)); +#53112 = SURFACE_STYLE_USAGE(.BOTH.,#53113); +#53113 = SURFACE_SIDE_STYLE('',(#53114)); +#53114 = SURFACE_STYLE_FILL_AREA(#53115); +#53115 = FILL_AREA_STYLE('',(#53116)); +#53116 = FILL_AREA_STYLE_COLOUR('',#50691); +#53117 = STYLED_ITEM('color',(#53118),#4076); +#53118 = PRESENTATION_STYLE_ASSIGNMENT((#53119)); +#53119 = SURFACE_STYLE_USAGE(.BOTH.,#53120); +#53120 = SURFACE_SIDE_STYLE('',(#53121)); +#53121 = SURFACE_STYLE_FILL_AREA(#53122); +#53122 = FILL_AREA_STYLE('',(#53123)); +#53123 = FILL_AREA_STYLE_COLOUR('',#50691); +#53124 = STYLED_ITEM('color',(#53125),#4124); +#53125 = PRESENTATION_STYLE_ASSIGNMENT((#53126)); +#53126 = SURFACE_STYLE_USAGE(.BOTH.,#53127); +#53127 = SURFACE_SIDE_STYLE('',(#53128)); +#53128 = SURFACE_STYLE_FILL_AREA(#53129); +#53129 = FILL_AREA_STYLE('',(#53130)); +#53130 = FILL_AREA_STYLE_COLOUR('',#50691); +#53131 = STYLED_ITEM('color',(#53132),#4177); +#53132 = PRESENTATION_STYLE_ASSIGNMENT((#53133)); +#53133 = SURFACE_STYLE_USAGE(.BOTH.,#53134); +#53134 = SURFACE_SIDE_STYLE('',(#53135)); +#53135 = SURFACE_STYLE_FILL_AREA(#53136); +#53136 = FILL_AREA_STYLE('',(#53137)); +#53137 = FILL_AREA_STYLE_COLOUR('',#50691); +#53138 = STYLED_ITEM('color',(#53139),#4255); +#53139 = PRESENTATION_STYLE_ASSIGNMENT((#53140)); +#53140 = SURFACE_STYLE_USAGE(.BOTH.,#53141); +#53141 = SURFACE_SIDE_STYLE('',(#53142)); +#53142 = SURFACE_STYLE_FILL_AREA(#53143); +#53143 = FILL_AREA_STYLE('',(#53144)); +#53144 = FILL_AREA_STYLE_COLOUR('',#50655); +#53145 = STYLED_ITEM('color',(#53146),#4336); +#53146 = PRESENTATION_STYLE_ASSIGNMENT((#53147)); +#53147 = SURFACE_STYLE_USAGE(.BOTH.,#53148); +#53148 = SURFACE_SIDE_STYLE('',(#53149)); +#53149 = SURFACE_STYLE_FILL_AREA(#53150); +#53150 = FILL_AREA_STYLE('',(#53151)); +#53151 = FILL_AREA_STYLE_COLOUR('',#50691); +#53152 = STYLED_ITEM('color',(#53153),#4417); +#53153 = PRESENTATION_STYLE_ASSIGNMENT((#53154)); +#53154 = SURFACE_STYLE_USAGE(.BOTH.,#53155); +#53155 = SURFACE_SIDE_STYLE('',(#53156)); +#53156 = SURFACE_STYLE_FILL_AREA(#53157); +#53157 = FILL_AREA_STYLE('',(#53158)); +#53158 = FILL_AREA_STYLE_COLOUR('',#50655); +#53159 = STYLED_ITEM('color',(#53160),#4498); +#53160 = PRESENTATION_STYLE_ASSIGNMENT((#53161)); +#53161 = SURFACE_STYLE_USAGE(.BOTH.,#53162); +#53162 = SURFACE_SIDE_STYLE('',(#53163)); +#53163 = SURFACE_STYLE_FILL_AREA(#53164); +#53164 = FILL_AREA_STYLE('',(#53165)); +#53165 = FILL_AREA_STYLE_COLOUR('',#50655); +#53166 = STYLED_ITEM('color',(#53167),#4579); +#53167 = PRESENTATION_STYLE_ASSIGNMENT((#53168)); +#53168 = SURFACE_STYLE_USAGE(.BOTH.,#53169); +#53169 = SURFACE_SIDE_STYLE('',(#53170)); +#53170 = SURFACE_STYLE_FILL_AREA(#53171); +#53171 = FILL_AREA_STYLE('',(#53172)); +#53172 = FILL_AREA_STYLE_COLOUR('',#50691); +#53173 = STYLED_ITEM('color',(#53174),#4660); +#53174 = PRESENTATION_STYLE_ASSIGNMENT((#53175)); +#53175 = SURFACE_STYLE_USAGE(.BOTH.,#53176); +#53176 = SURFACE_SIDE_STYLE('',(#53177)); +#53177 = SURFACE_STYLE_FILL_AREA(#53178); +#53178 = FILL_AREA_STYLE('',(#53179)); +#53179 = FILL_AREA_STYLE_COLOUR('',#50691); +#53180 = STYLED_ITEM('color',(#53181),#4741); +#53181 = PRESENTATION_STYLE_ASSIGNMENT((#53182)); +#53182 = SURFACE_STYLE_USAGE(.BOTH.,#53183); +#53183 = SURFACE_SIDE_STYLE('',(#53184)); +#53184 = SURFACE_STYLE_FILL_AREA(#53185); +#53185 = FILL_AREA_STYLE('',(#53186)); +#53186 = FILL_AREA_STYLE_COLOUR('',#50655); +#53187 = STYLED_ITEM('color',(#53188),#4822); +#53188 = PRESENTATION_STYLE_ASSIGNMENT((#53189)); +#53189 = SURFACE_STYLE_USAGE(.BOTH.,#53190); +#53190 = SURFACE_SIDE_STYLE('',(#53191)); +#53191 = SURFACE_STYLE_FILL_AREA(#53192); +#53192 = FILL_AREA_STYLE('',(#53193)); +#53193 = FILL_AREA_STYLE_COLOUR('',#50655); +#53194 = STYLED_ITEM('color',(#53195),#4903); +#53195 = PRESENTATION_STYLE_ASSIGNMENT((#53196)); +#53196 = SURFACE_STYLE_USAGE(.BOTH.,#53197); +#53197 = SURFACE_SIDE_STYLE('',(#53198)); +#53198 = SURFACE_STYLE_FILL_AREA(#53199); +#53199 = FILL_AREA_STYLE('',(#53200)); +#53200 = FILL_AREA_STYLE_COLOUR('',#50691); +#53201 = STYLED_ITEM('color',(#53202),#4984); +#53202 = PRESENTATION_STYLE_ASSIGNMENT((#53203)); +#53203 = SURFACE_STYLE_USAGE(.BOTH.,#53204); +#53204 = SURFACE_SIDE_STYLE('',(#53205)); +#53205 = SURFACE_STYLE_FILL_AREA(#53206); +#53206 = FILL_AREA_STYLE('',(#53207)); +#53207 = FILL_AREA_STYLE_COLOUR('',#50691); +#53208 = STYLED_ITEM('color',(#53209),#5065); +#53209 = PRESENTATION_STYLE_ASSIGNMENT((#53210)); +#53210 = SURFACE_STYLE_USAGE(.BOTH.,#53211); +#53211 = SURFACE_SIDE_STYLE('',(#53212)); +#53212 = SURFACE_STYLE_FILL_AREA(#53213); +#53213 = FILL_AREA_STYLE('',(#53214)); +#53214 = FILL_AREA_STYLE_COLOUR('',#50655); +#53215 = STYLED_ITEM('color',(#53216),#5141); +#53216 = PRESENTATION_STYLE_ASSIGNMENT((#53217)); +#53217 = SURFACE_STYLE_USAGE(.BOTH.,#53218); +#53218 = SURFACE_SIDE_STYLE('',(#53219)); +#53219 = SURFACE_STYLE_FILL_AREA(#53220); +#53220 = FILL_AREA_STYLE('',(#53221)); +#53221 = FILL_AREA_STYLE_COLOUR('',#50691); +#53222 = STYLED_ITEM('color',(#53223),#5197); +#53223 = PRESENTATION_STYLE_ASSIGNMENT((#53224)); +#53224 = SURFACE_STYLE_USAGE(.BOTH.,#53225); +#53225 = SURFACE_SIDE_STYLE('',(#53226)); +#53226 = SURFACE_STYLE_FILL_AREA(#53227); +#53227 = FILL_AREA_STYLE('',(#53228)); +#53228 = FILL_AREA_STYLE_COLOUR('',#50691); +#53229 = STYLED_ITEM('color',(#53230),#5244); +#53230 = PRESENTATION_STYLE_ASSIGNMENT((#53231)); +#53231 = SURFACE_STYLE_USAGE(.BOTH.,#53232); +#53232 = SURFACE_SIDE_STYLE('',(#53233)); +#53233 = SURFACE_STYLE_FILL_AREA(#53234); +#53234 = FILL_AREA_STYLE('',(#53235)); +#53235 = FILL_AREA_STYLE_COLOUR('',#50691); +#53236 = STYLED_ITEM('color',(#53237),#5650); +#53237 = PRESENTATION_STYLE_ASSIGNMENT((#53238)); +#53238 = SURFACE_STYLE_USAGE(.BOTH.,#53239); +#53239 = SURFACE_SIDE_STYLE('',(#53240)); +#53240 = SURFACE_STYLE_FILL_AREA(#53241); +#53241 = FILL_AREA_STYLE('',(#53242)); +#53242 = FILL_AREA_STYLE_COLOUR('',#50691); +#53243 = STYLED_ITEM('color',(#53244),#5676); +#53244 = PRESENTATION_STYLE_ASSIGNMENT((#53245)); +#53245 = SURFACE_STYLE_USAGE(.BOTH.,#53246); +#53246 = SURFACE_SIDE_STYLE('',(#53247)); +#53247 = SURFACE_STYLE_FILL_AREA(#53248); +#53248 = FILL_AREA_STYLE('',(#53249)); +#53249 = FILL_AREA_STYLE_COLOUR('',#50655); +#53250 = STYLED_ITEM('color',(#53251),#5961); +#53251 = PRESENTATION_STYLE_ASSIGNMENT((#53252)); +#53252 = SURFACE_STYLE_USAGE(.BOTH.,#53253); +#53253 = SURFACE_SIDE_STYLE('',(#53254)); +#53254 = SURFACE_STYLE_FILL_AREA(#53255); +#53255 = FILL_AREA_STYLE('',(#53256)); +#53256 = FILL_AREA_STYLE_COLOUR('',#50691); +#53257 = STYLED_ITEM('color',(#53258),#6009); +#53258 = PRESENTATION_STYLE_ASSIGNMENT((#53259)); +#53259 = SURFACE_STYLE_USAGE(.BOTH.,#53260); +#53260 = SURFACE_SIDE_STYLE('',(#53261)); +#53261 = SURFACE_STYLE_FILL_AREA(#53262); +#53262 = FILL_AREA_STYLE('',(#53263)); +#53263 = FILL_AREA_STYLE_COLOUR('',#50691); +#53264 = STYLED_ITEM('color',(#53265),#6062); +#53265 = PRESENTATION_STYLE_ASSIGNMENT((#53266)); +#53266 = SURFACE_STYLE_USAGE(.BOTH.,#53267); +#53267 = SURFACE_SIDE_STYLE('',(#53268)); +#53268 = SURFACE_STYLE_FILL_AREA(#53269); +#53269 = FILL_AREA_STYLE('',(#53270)); +#53270 = FILL_AREA_STYLE_COLOUR('',#50691); +#53271 = STYLED_ITEM('color',(#53272),#6115); +#53272 = PRESENTATION_STYLE_ASSIGNMENT((#53273)); +#53273 = SURFACE_STYLE_USAGE(.BOTH.,#53274); +#53274 = SURFACE_SIDE_STYLE('',(#53275)); +#53275 = SURFACE_STYLE_FILL_AREA(#53276); +#53276 = FILL_AREA_STYLE('',(#53277)); +#53277 = FILL_AREA_STYLE_COLOUR('',#50691); +#53278 = STYLED_ITEM('color',(#53279),#6560); +#53279 = PRESENTATION_STYLE_ASSIGNMENT((#53280)); +#53280 = SURFACE_STYLE_USAGE(.BOTH.,#53281); +#53281 = SURFACE_SIDE_STYLE('',(#53282)); +#53282 = SURFACE_STYLE_FILL_AREA(#53283); +#53283 = FILL_AREA_STYLE('',(#53284)); +#53284 = FILL_AREA_STYLE_COLOUR('',#50691); +#53285 = STYLED_ITEM('color',(#53286),#6592); +#53286 = PRESENTATION_STYLE_ASSIGNMENT((#53287)); +#53287 = SURFACE_STYLE_USAGE(.BOTH.,#53288); +#53288 = SURFACE_SIDE_STYLE('',(#53289)); +#53289 = SURFACE_STYLE_FILL_AREA(#53290); +#53290 = FILL_AREA_STYLE('',(#53291)); +#53291 = FILL_AREA_STYLE_COLOUR('',#50691); +#53292 = STYLED_ITEM('color',(#53293),#6643); +#53293 = PRESENTATION_STYLE_ASSIGNMENT((#53294)); +#53294 = SURFACE_STYLE_USAGE(.BOTH.,#53295); +#53295 = SURFACE_SIDE_STYLE('',(#53296)); +#53296 = SURFACE_STYLE_FILL_AREA(#53297); +#53297 = FILL_AREA_STYLE('',(#53298)); +#53298 = FILL_AREA_STYLE_COLOUR('',#50655); +#53299 = STYLED_ITEM('color',(#53300),#6928); +#53300 = PRESENTATION_STYLE_ASSIGNMENT((#53301)); +#53301 = SURFACE_STYLE_USAGE(.BOTH.,#53302); +#53302 = SURFACE_SIDE_STYLE('',(#53303)); +#53303 = SURFACE_STYLE_FILL_AREA(#53304); +#53304 = FILL_AREA_STYLE('',(#53305)); +#53305 = FILL_AREA_STYLE_COLOUR('',#50691); +#53306 = STYLED_ITEM('color',(#53307),#6973); +#53307 = PRESENTATION_STYLE_ASSIGNMENT((#53308)); +#53308 = SURFACE_STYLE_USAGE(.BOTH.,#53309); +#53309 = SURFACE_SIDE_STYLE('',(#53310)); +#53310 = SURFACE_STYLE_FILL_AREA(#53311); +#53311 = FILL_AREA_STYLE('',(#53312)); +#53312 = FILL_AREA_STYLE_COLOUR('',#50655); +#53313 = STYLED_ITEM('color',(#53314),#7218); +#53314 = PRESENTATION_STYLE_ASSIGNMENT((#53315)); +#53315 = SURFACE_STYLE_USAGE(.BOTH.,#53316); +#53316 = SURFACE_SIDE_STYLE('',(#53317)); +#53317 = SURFACE_STYLE_FILL_AREA(#53318); +#53318 = FILL_AREA_STYLE('',(#53319)); +#53319 = FILL_AREA_STYLE_COLOUR('',#50655); +#53320 = STYLED_ITEM('color',(#53321),#7245); +#53321 = PRESENTATION_STYLE_ASSIGNMENT((#53322)); +#53322 = SURFACE_STYLE_USAGE(.BOTH.,#53323); +#53323 = SURFACE_SIDE_STYLE('',(#53324)); +#53324 = SURFACE_STYLE_FILL_AREA(#53325); +#53325 = FILL_AREA_STYLE('',(#53326)); +#53326 = FILL_AREA_STYLE_COLOUR('',#50655); +#53327 = STYLED_ITEM('color',(#53328),#7530); +#53328 = PRESENTATION_STYLE_ASSIGNMENT((#53329)); +#53329 = SURFACE_STYLE_USAGE(.BOTH.,#53330); +#53330 = SURFACE_SIDE_STYLE('',(#53331)); +#53331 = SURFACE_STYLE_FILL_AREA(#53332); +#53332 = FILL_AREA_STYLE('',(#53333)); +#53333 = FILL_AREA_STYLE_COLOUR('',#50691); +#53334 = STYLED_ITEM('color',(#53335),#7575); +#53335 = PRESENTATION_STYLE_ASSIGNMENT((#53336)); +#53336 = SURFACE_STYLE_USAGE(.BOTH.,#53337); +#53337 = SURFACE_SIDE_STYLE('',(#53338)); +#53338 = SURFACE_STYLE_FILL_AREA(#53339); +#53339 = FILL_AREA_STYLE('',(#53340)); +#53340 = FILL_AREA_STYLE_COLOUR('',#50655); +#53341 = STYLED_ITEM('color',(#53342),#7629); +#53342 = PRESENTATION_STYLE_ASSIGNMENT((#53343)); +#53343 = SURFACE_STYLE_USAGE(.BOTH.,#53344); +#53344 = SURFACE_SIDE_STYLE('',(#53345)); +#53345 = SURFACE_STYLE_FILL_AREA(#53346); +#53346 = FILL_AREA_STYLE('',(#53347)); +#53347 = FILL_AREA_STYLE_COLOUR('',#50655); +#53348 = STYLED_ITEM('color',(#53349),#7847); +#53349 = PRESENTATION_STYLE_ASSIGNMENT((#53350)); +#53350 = SURFACE_STYLE_USAGE(.BOTH.,#53351); +#53351 = SURFACE_SIDE_STYLE('',(#53352)); +#53352 = SURFACE_STYLE_FILL_AREA(#53353); +#53353 = FILL_AREA_STYLE('',(#53354)); +#53354 = FILL_AREA_STYLE_COLOUR('',#50655); +#53355 = STYLED_ITEM('color',(#53356),#8092); +#53356 = PRESENTATION_STYLE_ASSIGNMENT((#53357)); +#53357 = SURFACE_STYLE_USAGE(.BOTH.,#53358); +#53358 = SURFACE_SIDE_STYLE('',(#53359)); +#53359 = SURFACE_STYLE_FILL_AREA(#53360); +#53360 = FILL_AREA_STYLE('',(#53361)); +#53361 = FILL_AREA_STYLE_COLOUR('',#50655); +#53362 = STYLED_ITEM('color',(#53363),#8119); +#53363 = PRESENTATION_STYLE_ASSIGNMENT((#53364)); +#53364 = SURFACE_STYLE_USAGE(.BOTH.,#53365); +#53365 = SURFACE_SIDE_STYLE('',(#53366)); +#53366 = SURFACE_STYLE_FILL_AREA(#53367); +#53367 = FILL_AREA_STYLE('',(#53368)); +#53368 = FILL_AREA_STYLE_COLOUR('',#50691); +#53369 = STYLED_ITEM('color',(#53370),#8164); +#53370 = PRESENTATION_STYLE_ASSIGNMENT((#53371)); +#53371 = SURFACE_STYLE_USAGE(.BOTH.,#53372); +#53372 = SURFACE_SIDE_STYLE('',(#53373)); +#53373 = SURFACE_STYLE_FILL_AREA(#53374); +#53374 = FILL_AREA_STYLE('',(#53375)); +#53375 = FILL_AREA_STYLE_COLOUR('',#50655); +#53376 = STYLED_ITEM('color',(#53377),#8449); +#53377 = PRESENTATION_STYLE_ASSIGNMENT((#53378)); +#53378 = SURFACE_STYLE_USAGE(.BOTH.,#53379); +#53379 = SURFACE_SIDE_STYLE('',(#53380)); +#53380 = SURFACE_STYLE_FILL_AREA(#53381); +#53381 = FILL_AREA_STYLE('',(#53382)); +#53382 = FILL_AREA_STYLE_COLOUR('',#50655); +#53383 = STYLED_ITEM('color',(#53384),#8734); +#53384 = PRESENTATION_STYLE_ASSIGNMENT((#53385)); +#53385 = SURFACE_STYLE_USAGE(.BOTH.,#53386); +#53386 = SURFACE_SIDE_STYLE('',(#53387)); +#53387 = SURFACE_STYLE_FILL_AREA(#53388); +#53388 = FILL_AREA_STYLE('',(#53389)); +#53389 = FILL_AREA_STYLE_COLOUR('',#50691); +#53390 = STYLED_ITEM('color',(#53391),#8779); +#53391 = PRESENTATION_STYLE_ASSIGNMENT((#53392)); +#53392 = SURFACE_STYLE_USAGE(.BOTH.,#53393); +#53393 = SURFACE_SIDE_STYLE('',(#53394)); +#53394 = SURFACE_STYLE_FILL_AREA(#53395); +#53395 = FILL_AREA_STYLE('',(#53396)); +#53396 = FILL_AREA_STYLE_COLOUR('',#50655); +#53397 = STYLED_ITEM('color',(#53398),#8833); +#53398 = PRESENTATION_STYLE_ASSIGNMENT((#53399)); +#53399 = SURFACE_STYLE_USAGE(.BOTH.,#53400); +#53400 = SURFACE_SIDE_STYLE('',(#53401)); +#53401 = SURFACE_STYLE_FILL_AREA(#53402); +#53402 = FILL_AREA_STYLE('',(#53403)); +#53403 = FILL_AREA_STYLE_COLOUR('',#50655); +#53404 = STYLED_ITEM('color',(#53405),#9051); +#53405 = PRESENTATION_STYLE_ASSIGNMENT((#53406)); +#53406 = SURFACE_STYLE_USAGE(.BOTH.,#53407); +#53407 = SURFACE_SIDE_STYLE('',(#53408)); +#53408 = SURFACE_STYLE_FILL_AREA(#53409); +#53409 = FILL_AREA_STYLE('',(#53410)); +#53410 = FILL_AREA_STYLE_COLOUR('',#50655); +#53411 = STYLED_ITEM('color',(#53412),#9296); +#53412 = PRESENTATION_STYLE_ASSIGNMENT((#53413)); +#53413 = SURFACE_STYLE_USAGE(.BOTH.,#53414); +#53414 = SURFACE_SIDE_STYLE('',(#53415)); +#53415 = SURFACE_STYLE_FILL_AREA(#53416); +#53416 = FILL_AREA_STYLE('',(#53417)); +#53417 = FILL_AREA_STYLE_COLOUR('',#50655); +#53418 = STYLED_ITEM('color',(#53419),#9323); +#53419 = PRESENTATION_STYLE_ASSIGNMENT((#53420)); +#53420 = SURFACE_STYLE_USAGE(.BOTH.,#53421); +#53421 = SURFACE_SIDE_STYLE('',(#53422)); +#53422 = SURFACE_STYLE_FILL_AREA(#53423); +#53423 = FILL_AREA_STYLE('',(#53424)); +#53424 = FILL_AREA_STYLE_COLOUR('',#50691); +#53425 = STYLED_ITEM('color',(#53426),#9368); +#53426 = PRESENTATION_STYLE_ASSIGNMENT((#53427)); +#53427 = SURFACE_STYLE_USAGE(.BOTH.,#53428); +#53428 = SURFACE_SIDE_STYLE('',(#53429)); +#53429 = SURFACE_STYLE_FILL_AREA(#53430); +#53430 = FILL_AREA_STYLE('',(#53431)); +#53431 = FILL_AREA_STYLE_COLOUR('',#50655); +#53432 = STYLED_ITEM('color',(#53433),#9653); +#53433 = PRESENTATION_STYLE_ASSIGNMENT((#53434)); +#53434 = SURFACE_STYLE_USAGE(.BOTH.,#53435); +#53435 = SURFACE_SIDE_STYLE('',(#53436)); +#53436 = SURFACE_STYLE_FILL_AREA(#53437); +#53437 = FILL_AREA_STYLE('',(#53438)); +#53438 = FILL_AREA_STYLE_COLOUR('',#50655); +#53439 = STYLED_ITEM('color',(#53440),#9898); +#53440 = PRESENTATION_STYLE_ASSIGNMENT((#53441)); +#53441 = SURFACE_STYLE_USAGE(.BOTH.,#53442); +#53442 = SURFACE_SIDE_STYLE('',(#53443)); +#53443 = SURFACE_STYLE_FILL_AREA(#53444); +#53444 = FILL_AREA_STYLE('',(#53445)); +#53445 = FILL_AREA_STYLE_COLOUR('',#50691); +#53446 = STYLED_ITEM('color',(#53447),#9943); +#53447 = PRESENTATION_STYLE_ASSIGNMENT((#53448)); +#53448 = SURFACE_STYLE_USAGE(.BOTH.,#53449); +#53449 = SURFACE_SIDE_STYLE('',(#53450)); +#53450 = SURFACE_STYLE_FILL_AREA(#53451); +#53451 = FILL_AREA_STYLE('',(#53452)); +#53452 = FILL_AREA_STYLE_COLOUR('',#50655); +#53453 = STYLED_ITEM('color',(#53454),#9970); +#53454 = PRESENTATION_STYLE_ASSIGNMENT((#53455)); +#53455 = SURFACE_STYLE_USAGE(.BOTH.,#53456); +#53456 = SURFACE_SIDE_STYLE('',(#53457)); +#53457 = SURFACE_STYLE_FILL_AREA(#53458); +#53458 = FILL_AREA_STYLE('',(#53459)); +#53459 = FILL_AREA_STYLE_COLOUR('',#50691); +#53460 = STYLED_ITEM('color',(#53461),#10022); +#53461 = PRESENTATION_STYLE_ASSIGNMENT((#53462)); +#53462 = SURFACE_STYLE_USAGE(.BOTH.,#53463); +#53463 = SURFACE_SIDE_STYLE('',(#53464)); +#53464 = SURFACE_STYLE_FILL_AREA(#53465); +#53465 = FILL_AREA_STYLE('',(#53466)); +#53466 = FILL_AREA_STYLE_COLOUR('',#50691); +#53467 = STYLED_ITEM('color',(#53468),#10068); +#53468 = PRESENTATION_STYLE_ASSIGNMENT((#53469)); +#53469 = SURFACE_STYLE_USAGE(.BOTH.,#53470); +#53470 = SURFACE_SIDE_STYLE('',(#53471)); +#53471 = SURFACE_STYLE_FILL_AREA(#53472); +#53472 = FILL_AREA_STYLE('',(#53473)); +#53473 = FILL_AREA_STYLE_COLOUR('',#50691); +#53474 = STYLED_ITEM('color',(#53475),#10120); +#53475 = PRESENTATION_STYLE_ASSIGNMENT((#53476)); +#53476 = SURFACE_STYLE_USAGE(.BOTH.,#53477); +#53477 = SURFACE_SIDE_STYLE('',(#53478)); +#53478 = SURFACE_STYLE_FILL_AREA(#53479); +#53479 = FILL_AREA_STYLE('',(#53480)); +#53480 = FILL_AREA_STYLE_COLOUR('',#50691); +#53481 = STYLED_ITEM('color',(#53482),#10306); +#53482 = PRESENTATION_STYLE_ASSIGNMENT((#53483)); +#53483 = SURFACE_STYLE_USAGE(.BOTH.,#53484); +#53484 = SURFACE_SIDE_STYLE('',(#53485)); +#53485 = SURFACE_STYLE_FILL_AREA(#53486); +#53486 = FILL_AREA_STYLE('',(#53487)); +#53487 = FILL_AREA_STYLE_COLOUR('',#50691); +#53488 = STYLED_ITEM('color',(#53489),#10353); +#53489 = PRESENTATION_STYLE_ASSIGNMENT((#53490)); +#53490 = SURFACE_STYLE_USAGE(.BOTH.,#53491); +#53491 = SURFACE_SIDE_STYLE('',(#53492)); +#53492 = SURFACE_STYLE_FILL_AREA(#53493); +#53493 = FILL_AREA_STYLE('',(#53494)); +#53494 = FILL_AREA_STYLE_COLOUR('',#50655); +#53495 = STYLED_ITEM('color',(#53496),#10382); +#53496 = PRESENTATION_STYLE_ASSIGNMENT((#53497)); +#53497 = SURFACE_STYLE_USAGE(.BOTH.,#53498); +#53498 = SURFACE_SIDE_STYLE('',(#53499)); +#53499 = SURFACE_STYLE_FILL_AREA(#53500); +#53500 = FILL_AREA_STYLE('',(#53501)); +#53501 = FILL_AREA_STYLE_COLOUR('',#50655); +#53502 = STYLED_ITEM('color',(#53503),#10411); +#53503 = PRESENTATION_STYLE_ASSIGNMENT((#53504)); +#53504 = SURFACE_STYLE_USAGE(.BOTH.,#53505); +#53505 = SURFACE_SIDE_STYLE('',(#53506)); +#53506 = SURFACE_STYLE_FILL_AREA(#53507); +#53507 = FILL_AREA_STYLE('',(#53508)); +#53508 = FILL_AREA_STYLE_COLOUR('',#50655); +#53509 = STYLED_ITEM('color',(#53510),#10440); +#53510 = PRESENTATION_STYLE_ASSIGNMENT((#53511)); +#53511 = SURFACE_STYLE_USAGE(.BOTH.,#53512); +#53512 = SURFACE_SIDE_STYLE('',(#53513)); +#53513 = SURFACE_STYLE_FILL_AREA(#53514); +#53514 = FILL_AREA_STYLE('',(#53515)); +#53515 = FILL_AREA_STYLE_COLOUR('',#50655); +#53516 = STYLED_ITEM('color',(#53517),#10469); +#53517 = PRESENTATION_STYLE_ASSIGNMENT((#53518)); +#53518 = SURFACE_STYLE_USAGE(.BOTH.,#53519); +#53519 = SURFACE_SIDE_STYLE('',(#53520)); +#53520 = SURFACE_STYLE_FILL_AREA(#53521); +#53521 = FILL_AREA_STYLE('',(#53522)); +#53522 = FILL_AREA_STYLE_COLOUR('',#50655); +#53523 = STYLED_ITEM('color',(#53524),#10498); +#53524 = PRESENTATION_STYLE_ASSIGNMENT((#53525)); +#53525 = SURFACE_STYLE_USAGE(.BOTH.,#53526); +#53526 = SURFACE_SIDE_STYLE('',(#53527)); +#53527 = SURFACE_STYLE_FILL_AREA(#53528); +#53528 = FILL_AREA_STYLE('',(#53529)); +#53529 = FILL_AREA_STYLE_COLOUR('',#50655); +#53530 = STYLED_ITEM('color',(#53531),#10527); +#53531 = PRESENTATION_STYLE_ASSIGNMENT((#53532)); +#53532 = SURFACE_STYLE_USAGE(.BOTH.,#53533); +#53533 = SURFACE_SIDE_STYLE('',(#53534)); +#53534 = SURFACE_STYLE_FILL_AREA(#53535); +#53535 = FILL_AREA_STYLE('',(#53536)); +#53536 = FILL_AREA_STYLE_COLOUR('',#50655); +#53537 = STYLED_ITEM('color',(#53538),#10554); +#53538 = PRESENTATION_STYLE_ASSIGNMENT((#53539)); +#53539 = SURFACE_STYLE_USAGE(.BOTH.,#53540); +#53540 = SURFACE_SIDE_STYLE('',(#53541)); +#53541 = SURFACE_STYLE_FILL_AREA(#53542); +#53542 = FILL_AREA_STYLE('',(#53543)); +#53543 = FILL_AREA_STYLE_COLOUR('',#50655); +#53544 = STYLED_ITEM('color',(#53545),#10581); +#53545 = PRESENTATION_STYLE_ASSIGNMENT((#53546)); +#53546 = SURFACE_STYLE_USAGE(.BOTH.,#53547); +#53547 = SURFACE_SIDE_STYLE('',(#53548)); +#53548 = SURFACE_STYLE_FILL_AREA(#53549); +#53549 = FILL_AREA_STYLE('',(#53550)); +#53550 = FILL_AREA_STYLE_COLOUR('',#50655); +#53551 = STYLED_ITEM('color',(#53552),#10608); +#53552 = PRESENTATION_STYLE_ASSIGNMENT((#53553)); +#53553 = SURFACE_STYLE_USAGE(.BOTH.,#53554); +#53554 = SURFACE_SIDE_STYLE('',(#53555)); +#53555 = SURFACE_STYLE_FILL_AREA(#53556); +#53556 = FILL_AREA_STYLE('',(#53557)); +#53557 = FILL_AREA_STYLE_COLOUR('',#50655); +#53558 = STYLED_ITEM('color',(#53559),#10635); +#53559 = PRESENTATION_STYLE_ASSIGNMENT((#53560)); +#53560 = SURFACE_STYLE_USAGE(.BOTH.,#53561); +#53561 = SURFACE_SIDE_STYLE('',(#53562)); +#53562 = SURFACE_STYLE_FILL_AREA(#53563); +#53563 = FILL_AREA_STYLE('',(#53564)); +#53564 = FILL_AREA_STYLE_COLOUR('',#50655); +#53565 = STYLED_ITEM('color',(#53566),#10662); +#53566 = PRESENTATION_STYLE_ASSIGNMENT((#53567)); +#53567 = SURFACE_STYLE_USAGE(.BOTH.,#53568); +#53568 = SURFACE_SIDE_STYLE('',(#53569)); +#53569 = SURFACE_STYLE_FILL_AREA(#53570); +#53570 = FILL_AREA_STYLE('',(#53571)); +#53571 = FILL_AREA_STYLE_COLOUR('',#50655); +#53572 = STYLED_ITEM('color',(#53573),#10689); +#53573 = PRESENTATION_STYLE_ASSIGNMENT((#53574)); +#53574 = SURFACE_STYLE_USAGE(.BOTH.,#53575); +#53575 = SURFACE_SIDE_STYLE('',(#53576)); +#53576 = SURFACE_STYLE_FILL_AREA(#53577); +#53577 = FILL_AREA_STYLE('',(#53578)); +#53578 = FILL_AREA_STYLE_COLOUR('',#50655); +#53579 = STYLED_ITEM('color',(#53580),#10716); +#53580 = PRESENTATION_STYLE_ASSIGNMENT((#53581)); +#53581 = SURFACE_STYLE_USAGE(.BOTH.,#53582); +#53582 = SURFACE_SIDE_STYLE('',(#53583)); +#53583 = SURFACE_STYLE_FILL_AREA(#53584); +#53584 = FILL_AREA_STYLE('',(#53585)); +#53585 = FILL_AREA_STYLE_COLOUR('',#50655); +#53586 = STYLED_ITEM('color',(#53587),#10723); +#53587 = PRESENTATION_STYLE_ASSIGNMENT((#53588)); +#53588 = SURFACE_STYLE_USAGE(.BOTH.,#53589); +#53589 = SURFACE_SIDE_STYLE('',(#53590)); +#53590 = SURFACE_STYLE_FILL_AREA(#53591); +#53591 = FILL_AREA_STYLE('',(#53592)); +#53592 = FILL_AREA_STYLE_COLOUR('',#50691); +#53593 = STYLED_ITEM('color',(#53594),#10774); +#53594 = PRESENTATION_STYLE_ASSIGNMENT((#53595)); +#53595 = SURFACE_STYLE_USAGE(.BOTH.,#53596); +#53596 = SURFACE_SIDE_STYLE('',(#53597)); +#53597 = SURFACE_STYLE_FILL_AREA(#53598); +#53598 = FILL_AREA_STYLE('',(#53599)); +#53599 = FILL_AREA_STYLE_COLOUR('',#50691); +#53600 = STYLED_ITEM('color',(#53601),#10825); +#53601 = PRESENTATION_STYLE_ASSIGNMENT((#53602)); +#53602 = SURFACE_STYLE_USAGE(.BOTH.,#53603); +#53603 = SURFACE_SIDE_STYLE('',(#53604)); +#53604 = SURFACE_STYLE_FILL_AREA(#53605); +#53605 = FILL_AREA_STYLE('',(#53606)); +#53606 = FILL_AREA_STYLE_COLOUR('',#50691); +#53607 = STYLED_ITEM('color',(#53608),#10884); +#53608 = PRESENTATION_STYLE_ASSIGNMENT((#53609)); +#53609 = SURFACE_STYLE_USAGE(.BOTH.,#53610); +#53610 = SURFACE_SIDE_STYLE('',(#53611)); +#53611 = SURFACE_STYLE_FILL_AREA(#53612); +#53612 = FILL_AREA_STYLE('',(#53613)); +#53613 = FILL_AREA_STYLE_COLOUR('',#50691); +#53614 = STYLED_ITEM('color',(#53615),#10962); +#53615 = PRESENTATION_STYLE_ASSIGNMENT((#53616)); +#53616 = SURFACE_STYLE_USAGE(.BOTH.,#53617); +#53617 = SURFACE_SIDE_STYLE('',(#53618)); +#53618 = SURFACE_STYLE_FILL_AREA(#53619); +#53619 = FILL_AREA_STYLE('',(#53620)); +#53620 = FILL_AREA_STYLE_COLOUR('',#50655); +#53621 = STYLED_ITEM('color',(#53622),#11043); +#53622 = PRESENTATION_STYLE_ASSIGNMENT((#53623)); +#53623 = SURFACE_STYLE_USAGE(.BOTH.,#53624); +#53624 = SURFACE_SIDE_STYLE('',(#53625)); +#53625 = SURFACE_STYLE_FILL_AREA(#53626); +#53626 = FILL_AREA_STYLE('',(#53627)); +#53627 = FILL_AREA_STYLE_COLOUR('',#50655); +#53628 = STYLED_ITEM('color',(#53629),#11124); +#53629 = PRESENTATION_STYLE_ASSIGNMENT((#53630)); +#53630 = SURFACE_STYLE_USAGE(.BOTH.,#53631); +#53631 = SURFACE_SIDE_STYLE('',(#53632)); +#53632 = SURFACE_STYLE_FILL_AREA(#53633); +#53633 = FILL_AREA_STYLE('',(#53634)); +#53634 = FILL_AREA_STYLE_COLOUR('',#50691); +#53635 = STYLED_ITEM('color',(#53636),#11205); +#53636 = PRESENTATION_STYLE_ASSIGNMENT((#53637)); +#53637 = SURFACE_STYLE_USAGE(.BOTH.,#53638); +#53638 = SURFACE_SIDE_STYLE('',(#53639)); +#53639 = SURFACE_STYLE_FILL_AREA(#53640); +#53640 = FILL_AREA_STYLE('',(#53641)); +#53641 = FILL_AREA_STYLE_COLOUR('',#50691); +#53642 = STYLED_ITEM('color',(#53643),#11286); +#53643 = PRESENTATION_STYLE_ASSIGNMENT((#53644)); +#53644 = SURFACE_STYLE_USAGE(.BOTH.,#53645); +#53645 = SURFACE_SIDE_STYLE('',(#53646)); +#53646 = SURFACE_STYLE_FILL_AREA(#53647); +#53647 = FILL_AREA_STYLE('',(#53648)); +#53648 = FILL_AREA_STYLE_COLOUR('',#50655); +#53649 = STYLED_ITEM('color',(#53650),#11367); +#53650 = PRESENTATION_STYLE_ASSIGNMENT((#53651)); +#53651 = SURFACE_STYLE_USAGE(.BOTH.,#53652); +#53652 = SURFACE_SIDE_STYLE('',(#53653)); +#53653 = SURFACE_STYLE_FILL_AREA(#53654); +#53654 = FILL_AREA_STYLE('',(#53655)); +#53655 = FILL_AREA_STYLE_COLOUR('',#50655); +#53656 = STYLED_ITEM('color',(#53657),#11448); +#53657 = PRESENTATION_STYLE_ASSIGNMENT((#53658)); +#53658 = SURFACE_STYLE_USAGE(.BOTH.,#53659); +#53659 = SURFACE_SIDE_STYLE('',(#53660)); +#53660 = SURFACE_STYLE_FILL_AREA(#53661); +#53661 = FILL_AREA_STYLE('',(#53662)); +#53662 = FILL_AREA_STYLE_COLOUR('',#50691); +#53663 = STYLED_ITEM('color',(#53664),#11529); +#53664 = PRESENTATION_STYLE_ASSIGNMENT((#53665)); +#53665 = SURFACE_STYLE_USAGE(.BOTH.,#53666); +#53666 = SURFACE_SIDE_STYLE('',(#53667)); +#53667 = SURFACE_STYLE_FILL_AREA(#53668); +#53668 = FILL_AREA_STYLE('',(#53669)); +#53669 = FILL_AREA_STYLE_COLOUR('',#50691); +#53670 = STYLED_ITEM('color',(#53671),#11610); +#53671 = PRESENTATION_STYLE_ASSIGNMENT((#53672)); +#53672 = SURFACE_STYLE_USAGE(.BOTH.,#53673); +#53673 = SURFACE_SIDE_STYLE('',(#53674)); +#53674 = SURFACE_STYLE_FILL_AREA(#53675); +#53675 = FILL_AREA_STYLE('',(#53676)); +#53676 = FILL_AREA_STYLE_COLOUR('',#50655); +#53677 = STYLED_ITEM('color',(#53678),#11691); +#53678 = PRESENTATION_STYLE_ASSIGNMENT((#53679)); +#53679 = SURFACE_STYLE_USAGE(.BOTH.,#53680); +#53680 = SURFACE_SIDE_STYLE('',(#53681)); +#53681 = SURFACE_STYLE_FILL_AREA(#53682); +#53682 = FILL_AREA_STYLE('',(#53683)); +#53683 = FILL_AREA_STYLE_COLOUR('',#50655); +#53684 = STYLED_ITEM('color',(#53685),#11772); +#53685 = PRESENTATION_STYLE_ASSIGNMENT((#53686)); +#53686 = SURFACE_STYLE_USAGE(.BOTH.,#53687); +#53687 = SURFACE_SIDE_STYLE('',(#53688)); +#53688 = SURFACE_STYLE_FILL_AREA(#53689); +#53689 = FILL_AREA_STYLE('',(#53690)); +#53690 = FILL_AREA_STYLE_COLOUR('',#50691); +#53691 = STYLED_ITEM('color',(#53692),#11853); +#53692 = PRESENTATION_STYLE_ASSIGNMENT((#53693)); +#53693 = SURFACE_STYLE_USAGE(.BOTH.,#53694); +#53694 = SURFACE_SIDE_STYLE('',(#53695)); +#53695 = SURFACE_STYLE_FILL_AREA(#53696); +#53696 = FILL_AREA_STYLE('',(#53697)); +#53697 = FILL_AREA_STYLE_COLOUR('',#50691); +#53698 = STYLED_ITEM('color',(#53699),#11934); +#53699 = PRESENTATION_STYLE_ASSIGNMENT((#53700)); +#53700 = SURFACE_STYLE_USAGE(.BOTH.,#53701); +#53701 = SURFACE_SIDE_STYLE('',(#53702)); +#53702 = SURFACE_STYLE_FILL_AREA(#53703); +#53703 = FILL_AREA_STYLE('',(#53704)); +#53704 = FILL_AREA_STYLE_COLOUR('',#50655); +#53705 = STYLED_ITEM('color',(#53706),#12010); +#53706 = PRESENTATION_STYLE_ASSIGNMENT((#53707)); +#53707 = SURFACE_STYLE_USAGE(.BOTH.,#53708); +#53708 = SURFACE_SIDE_STYLE('',(#53709)); +#53709 = SURFACE_STYLE_FILL_AREA(#53710); +#53710 = FILL_AREA_STYLE('',(#53711)); +#53711 = FILL_AREA_STYLE_COLOUR('',#50691); +#53712 = STYLED_ITEM('color',(#53713),#12042); +#53713 = PRESENTATION_STYLE_ASSIGNMENT((#53714)); +#53714 = SURFACE_STYLE_USAGE(.BOTH.,#53715); +#53715 = SURFACE_SIDE_STYLE('',(#53716)); +#53716 = SURFACE_STYLE_FILL_AREA(#53717); +#53717 = FILL_AREA_STYLE('',(#53718)); +#53718 = FILL_AREA_STYLE_COLOUR('',#50691); +#53719 = STYLED_ITEM('color',(#53720),#12068); +#53720 = PRESENTATION_STYLE_ASSIGNMENT((#53721)); +#53721 = SURFACE_STYLE_USAGE(.BOTH.,#53722); +#53722 = SURFACE_SIDE_STYLE('',(#53723)); +#53723 = SURFACE_STYLE_FILL_AREA(#53724); +#53724 = FILL_AREA_STYLE('',(#53725)); +#53725 = FILL_AREA_STYLE_COLOUR('',#50655); +#53726 = STYLED_ITEM('color',(#53727),#12095); +#53727 = PRESENTATION_STYLE_ASSIGNMENT((#53728)); +#53728 = SURFACE_STYLE_USAGE(.BOTH.,#53729); +#53729 = SURFACE_SIDE_STYLE('',(#53730)); +#53730 = SURFACE_STYLE_FILL_AREA(#53731); +#53731 = FILL_AREA_STYLE('',(#53732)); +#53732 = FILL_AREA_STYLE_COLOUR('',#50655); +#53733 = STYLED_ITEM('color',(#53734),#12122); +#53734 = PRESENTATION_STYLE_ASSIGNMENT((#53735)); +#53735 = SURFACE_STYLE_USAGE(.BOTH.,#53736); +#53736 = SURFACE_SIDE_STYLE('',(#53737)); +#53737 = SURFACE_STYLE_FILL_AREA(#53738); +#53738 = FILL_AREA_STYLE('',(#53739)); +#53739 = FILL_AREA_STYLE_COLOUR('',#50655); +#53740 = STYLED_ITEM('color',(#53741),#12149); +#53741 = PRESENTATION_STYLE_ASSIGNMENT((#53742)); +#53742 = SURFACE_STYLE_USAGE(.BOTH.,#53743); +#53743 = SURFACE_SIDE_STYLE('',(#53744)); +#53744 = SURFACE_STYLE_FILL_AREA(#53745); +#53745 = FILL_AREA_STYLE('',(#53746)); +#53746 = FILL_AREA_STYLE_COLOUR('',#50655); +#53747 = STYLED_ITEM('color',(#53748),#12176); +#53748 = PRESENTATION_STYLE_ASSIGNMENT((#53749)); +#53749 = SURFACE_STYLE_USAGE(.BOTH.,#53750); +#53750 = SURFACE_SIDE_STYLE('',(#53751)); +#53751 = SURFACE_STYLE_FILL_AREA(#53752); +#53752 = FILL_AREA_STYLE('',(#53753)); +#53753 = FILL_AREA_STYLE_COLOUR('',#50655); +#53754 = STYLED_ITEM('color',(#53755),#12203); +#53755 = PRESENTATION_STYLE_ASSIGNMENT((#53756)); +#53756 = SURFACE_STYLE_USAGE(.BOTH.,#53757); +#53757 = SURFACE_SIDE_STYLE('',(#53758)); +#53758 = SURFACE_STYLE_FILL_AREA(#53759); +#53759 = FILL_AREA_STYLE('',(#53760)); +#53760 = FILL_AREA_STYLE_COLOUR('',#50655); +#53761 = STYLED_ITEM('color',(#53762),#12230); +#53762 = PRESENTATION_STYLE_ASSIGNMENT((#53763)); +#53763 = SURFACE_STYLE_USAGE(.BOTH.,#53764); +#53764 = SURFACE_SIDE_STYLE('',(#53765)); +#53765 = SURFACE_STYLE_FILL_AREA(#53766); +#53766 = FILL_AREA_STYLE('',(#53767)); +#53767 = FILL_AREA_STYLE_COLOUR('',#50655); +#53768 = STYLED_ITEM('color',(#53769),#12257); +#53769 = PRESENTATION_STYLE_ASSIGNMENT((#53770)); +#53770 = SURFACE_STYLE_USAGE(.BOTH.,#53771); +#53771 = SURFACE_SIDE_STYLE('',(#53772)); +#53772 = SURFACE_STYLE_FILL_AREA(#53773); +#53773 = FILL_AREA_STYLE('',(#53774)); +#53774 = FILL_AREA_STYLE_COLOUR('',#50655); +#53775 = STYLED_ITEM('color',(#53776),#12264); +#53776 = PRESENTATION_STYLE_ASSIGNMENT((#53777)); +#53777 = SURFACE_STYLE_USAGE(.BOTH.,#53778); +#53778 = SURFACE_SIDE_STYLE('',(#53779)); +#53779 = SURFACE_STYLE_FILL_AREA(#53780); +#53780 = FILL_AREA_STYLE('',(#53781)); +#53781 = FILL_AREA_STYLE_COLOUR('',#50655); +#53782 = STYLED_ITEM('color',(#53783),#12291); +#53783 = PRESENTATION_STYLE_ASSIGNMENT((#53784)); +#53784 = SURFACE_STYLE_USAGE(.BOTH.,#53785); +#53785 = SURFACE_SIDE_STYLE('',(#53786)); +#53786 = SURFACE_STYLE_FILL_AREA(#53787); +#53787 = FILL_AREA_STYLE('',(#53788)); +#53788 = FILL_AREA_STYLE_COLOUR('',#50655); +#53789 = STYLED_ITEM('color',(#53790),#12318); +#53790 = PRESENTATION_STYLE_ASSIGNMENT((#53791)); +#53791 = SURFACE_STYLE_USAGE(.BOTH.,#53792); +#53792 = SURFACE_SIDE_STYLE('',(#53793)); +#53793 = SURFACE_STYLE_FILL_AREA(#53794); +#53794 = FILL_AREA_STYLE('',(#53795)); +#53795 = FILL_AREA_STYLE_COLOUR('',#50655); +#53796 = STYLED_ITEM('color',(#53797),#12345); +#53797 = PRESENTATION_STYLE_ASSIGNMENT((#53798)); +#53798 = SURFACE_STYLE_USAGE(.BOTH.,#53799); +#53799 = SURFACE_SIDE_STYLE('',(#53800)); +#53800 = SURFACE_STYLE_FILL_AREA(#53801); +#53801 = FILL_AREA_STYLE('',(#53802)); +#53802 = FILL_AREA_STYLE_COLOUR('',#50655); +#53803 = STYLED_ITEM('color',(#53804),#12372); +#53804 = PRESENTATION_STYLE_ASSIGNMENT((#53805)); +#53805 = SURFACE_STYLE_USAGE(.BOTH.,#53806); +#53806 = SURFACE_SIDE_STYLE('',(#53807)); +#53807 = SURFACE_STYLE_FILL_AREA(#53808); +#53808 = FILL_AREA_STYLE('',(#53809)); +#53809 = FILL_AREA_STYLE_COLOUR('',#50655); +#53810 = STYLED_ITEM('color',(#53811),#12399); +#53811 = PRESENTATION_STYLE_ASSIGNMENT((#53812)); +#53812 = SURFACE_STYLE_USAGE(.BOTH.,#53813); +#53813 = SURFACE_SIDE_STYLE('',(#53814)); +#53814 = SURFACE_STYLE_FILL_AREA(#53815); +#53815 = FILL_AREA_STYLE('',(#53816)); +#53816 = FILL_AREA_STYLE_COLOUR('',#50655); +#53817 = STYLED_ITEM('color',(#53818),#12426); +#53818 = PRESENTATION_STYLE_ASSIGNMENT((#53819)); +#53819 = SURFACE_STYLE_USAGE(.BOTH.,#53820); +#53820 = SURFACE_SIDE_STYLE('',(#53821)); +#53821 = SURFACE_STYLE_FILL_AREA(#53822); +#53822 = FILL_AREA_STYLE('',(#53823)); +#53823 = FILL_AREA_STYLE_COLOUR('',#50655); +#53824 = STYLED_ITEM('color',(#53825),#12453); +#53825 = PRESENTATION_STYLE_ASSIGNMENT((#53826)); +#53826 = SURFACE_STYLE_USAGE(.BOTH.,#53827); +#53827 = SURFACE_SIDE_STYLE('',(#53828)); +#53828 = SURFACE_STYLE_FILL_AREA(#53829); +#53829 = FILL_AREA_STYLE('',(#53830)); +#53830 = FILL_AREA_STYLE_COLOUR('',#50655); +#53831 = STYLED_ITEM('color',(#53832),#12460); +#53832 = PRESENTATION_STYLE_ASSIGNMENT((#53833)); +#53833 = SURFACE_STYLE_USAGE(.BOTH.,#53834); +#53834 = SURFACE_SIDE_STYLE('',(#53835)); +#53835 = SURFACE_STYLE_FILL_AREA(#53836); +#53836 = FILL_AREA_STYLE('',(#53837)); +#53837 = FILL_AREA_STYLE_COLOUR('',#50655); +#53838 = STYLED_ITEM('color',(#53839),#12487); +#53839 = PRESENTATION_STYLE_ASSIGNMENT((#53840)); +#53840 = SURFACE_STYLE_USAGE(.BOTH.,#53841); +#53841 = SURFACE_SIDE_STYLE('',(#53842)); +#53842 = SURFACE_STYLE_FILL_AREA(#53843); +#53843 = FILL_AREA_STYLE('',(#53844)); +#53844 = FILL_AREA_STYLE_COLOUR('',#50655); +#53845 = STYLED_ITEM('color',(#53846),#12514); +#53846 = PRESENTATION_STYLE_ASSIGNMENT((#53847)); +#53847 = SURFACE_STYLE_USAGE(.BOTH.,#53848); +#53848 = SURFACE_SIDE_STYLE('',(#53849)); +#53849 = SURFACE_STYLE_FILL_AREA(#53850); +#53850 = FILL_AREA_STYLE('',(#53851)); +#53851 = FILL_AREA_STYLE_COLOUR('',#50655); +#53852 = STYLED_ITEM('color',(#53853),#12541); +#53853 = PRESENTATION_STYLE_ASSIGNMENT((#53854)); +#53854 = SURFACE_STYLE_USAGE(.BOTH.,#53855); +#53855 = SURFACE_SIDE_STYLE('',(#53856)); +#53856 = SURFACE_STYLE_FILL_AREA(#53857); +#53857 = FILL_AREA_STYLE('',(#53858)); +#53858 = FILL_AREA_STYLE_COLOUR('',#50655); +#53859 = STYLED_ITEM('color',(#53860),#12568); +#53860 = PRESENTATION_STYLE_ASSIGNMENT((#53861)); +#53861 = SURFACE_STYLE_USAGE(.BOTH.,#53862); +#53862 = SURFACE_SIDE_STYLE('',(#53863)); +#53863 = SURFACE_STYLE_FILL_AREA(#53864); +#53864 = FILL_AREA_STYLE('',(#53865)); +#53865 = FILL_AREA_STYLE_COLOUR('',#50655); +#53866 = STYLED_ITEM('color',(#53867),#12595); +#53867 = PRESENTATION_STYLE_ASSIGNMENT((#53868)); +#53868 = SURFACE_STYLE_USAGE(.BOTH.,#53869); +#53869 = SURFACE_SIDE_STYLE('',(#53870)); +#53870 = SURFACE_STYLE_FILL_AREA(#53871); +#53871 = FILL_AREA_STYLE('',(#53872)); +#53872 = FILL_AREA_STYLE_COLOUR('',#50655); +#53873 = STYLED_ITEM('color',(#53874),#12622); +#53874 = PRESENTATION_STYLE_ASSIGNMENT((#53875)); +#53875 = SURFACE_STYLE_USAGE(.BOTH.,#53876); +#53876 = SURFACE_SIDE_STYLE('',(#53877)); +#53877 = SURFACE_STYLE_FILL_AREA(#53878); +#53878 = FILL_AREA_STYLE('',(#53879)); +#53879 = FILL_AREA_STYLE_COLOUR('',#50655); +#53880 = STYLED_ITEM('color',(#53881),#12649); +#53881 = PRESENTATION_STYLE_ASSIGNMENT((#53882)); +#53882 = SURFACE_STYLE_USAGE(.BOTH.,#53883); +#53883 = SURFACE_SIDE_STYLE('',(#53884)); +#53884 = SURFACE_STYLE_FILL_AREA(#53885); +#53885 = FILL_AREA_STYLE('',(#53886)); +#53886 = FILL_AREA_STYLE_COLOUR('',#50655); +#53887 = STYLED_ITEM('color',(#53888),#12656); +#53888 = PRESENTATION_STYLE_ASSIGNMENT((#53889)); +#53889 = SURFACE_STYLE_USAGE(.BOTH.,#53890); +#53890 = SURFACE_SIDE_STYLE('',(#53891)); +#53891 = SURFACE_STYLE_FILL_AREA(#53892); +#53892 = FILL_AREA_STYLE('',(#53893)); +#53893 = FILL_AREA_STYLE_COLOUR('',#50655); +#53894 = STYLED_ITEM('color',(#53895),#12683); +#53895 = PRESENTATION_STYLE_ASSIGNMENT((#53896)); +#53896 = SURFACE_STYLE_USAGE(.BOTH.,#53897); +#53897 = SURFACE_SIDE_STYLE('',(#53898)); +#53898 = SURFACE_STYLE_FILL_AREA(#53899); +#53899 = FILL_AREA_STYLE('',(#53900)); +#53900 = FILL_AREA_STYLE_COLOUR('',#50655); +#53901 = STYLED_ITEM('color',(#53902),#12710); +#53902 = PRESENTATION_STYLE_ASSIGNMENT((#53903)); +#53903 = SURFACE_STYLE_USAGE(.BOTH.,#53904); +#53904 = SURFACE_SIDE_STYLE('',(#53905)); +#53905 = SURFACE_STYLE_FILL_AREA(#53906); +#53906 = FILL_AREA_STYLE('',(#53907)); +#53907 = FILL_AREA_STYLE_COLOUR('',#50655); +#53908 = STYLED_ITEM('color',(#53909),#12737); +#53909 = PRESENTATION_STYLE_ASSIGNMENT((#53910)); +#53910 = SURFACE_STYLE_USAGE(.BOTH.,#53911); +#53911 = SURFACE_SIDE_STYLE('',(#53912)); +#53912 = SURFACE_STYLE_FILL_AREA(#53913); +#53913 = FILL_AREA_STYLE('',(#53914)); +#53914 = FILL_AREA_STYLE_COLOUR('',#50655); +#53915 = STYLED_ITEM('color',(#53916),#12764); +#53916 = PRESENTATION_STYLE_ASSIGNMENT((#53917)); +#53917 = SURFACE_STYLE_USAGE(.BOTH.,#53918); +#53918 = SURFACE_SIDE_STYLE('',(#53919)); +#53919 = SURFACE_STYLE_FILL_AREA(#53920); +#53920 = FILL_AREA_STYLE('',(#53921)); +#53921 = FILL_AREA_STYLE_COLOUR('',#50655); +#53922 = STYLED_ITEM('color',(#53923),#12791); +#53923 = PRESENTATION_STYLE_ASSIGNMENT((#53924)); +#53924 = SURFACE_STYLE_USAGE(.BOTH.,#53925); +#53925 = SURFACE_SIDE_STYLE('',(#53926)); +#53926 = SURFACE_STYLE_FILL_AREA(#53927); +#53927 = FILL_AREA_STYLE('',(#53928)); +#53928 = FILL_AREA_STYLE_COLOUR('',#50655); +#53929 = STYLED_ITEM('color',(#53930),#12818); +#53930 = PRESENTATION_STYLE_ASSIGNMENT((#53931)); +#53931 = SURFACE_STYLE_USAGE(.BOTH.,#53932); +#53932 = SURFACE_SIDE_STYLE('',(#53933)); +#53933 = SURFACE_STYLE_FILL_AREA(#53934); +#53934 = FILL_AREA_STYLE('',(#53935)); +#53935 = FILL_AREA_STYLE_COLOUR('',#50655); +#53936 = STYLED_ITEM('color',(#53937),#12845); +#53937 = PRESENTATION_STYLE_ASSIGNMENT((#53938)); +#53938 = SURFACE_STYLE_USAGE(.BOTH.,#53939); +#53939 = SURFACE_SIDE_STYLE('',(#53940)); +#53940 = SURFACE_STYLE_FILL_AREA(#53941); +#53941 = FILL_AREA_STYLE('',(#53942)); +#53942 = FILL_AREA_STYLE_COLOUR('',#50655); +#53943 = STYLED_ITEM('color',(#53944),#12852); +#53944 = PRESENTATION_STYLE_ASSIGNMENT((#53945)); +#53945 = SURFACE_STYLE_USAGE(.BOTH.,#53946); +#53946 = SURFACE_SIDE_STYLE('',(#53947)); +#53947 = SURFACE_STYLE_FILL_AREA(#53948); +#53948 = FILL_AREA_STYLE('',(#53949)); +#53949 = FILL_AREA_STYLE_COLOUR('',#50655); +#53950 = STYLED_ITEM('color',(#53951),#12879); +#53951 = PRESENTATION_STYLE_ASSIGNMENT((#53952)); +#53952 = SURFACE_STYLE_USAGE(.BOTH.,#53953); +#53953 = SURFACE_SIDE_STYLE('',(#53954)); +#53954 = SURFACE_STYLE_FILL_AREA(#53955); +#53955 = FILL_AREA_STYLE('',(#53956)); +#53956 = FILL_AREA_STYLE_COLOUR('',#50655); +#53957 = STYLED_ITEM('color',(#53958),#12906); +#53958 = PRESENTATION_STYLE_ASSIGNMENT((#53959)); +#53959 = SURFACE_STYLE_USAGE(.BOTH.,#53960); +#53960 = SURFACE_SIDE_STYLE('',(#53961)); +#53961 = SURFACE_STYLE_FILL_AREA(#53962); +#53962 = FILL_AREA_STYLE('',(#53963)); +#53963 = FILL_AREA_STYLE_COLOUR('',#50655); +#53964 = STYLED_ITEM('color',(#53965),#12933); +#53965 = PRESENTATION_STYLE_ASSIGNMENT((#53966)); +#53966 = SURFACE_STYLE_USAGE(.BOTH.,#53967); +#53967 = SURFACE_SIDE_STYLE('',(#53968)); +#53968 = SURFACE_STYLE_FILL_AREA(#53969); +#53969 = FILL_AREA_STYLE('',(#53970)); +#53970 = FILL_AREA_STYLE_COLOUR('',#50655); +#53971 = STYLED_ITEM('color',(#53972),#12960); +#53972 = PRESENTATION_STYLE_ASSIGNMENT((#53973)); +#53973 = SURFACE_STYLE_USAGE(.BOTH.,#53974); +#53974 = SURFACE_SIDE_STYLE('',(#53975)); +#53975 = SURFACE_STYLE_FILL_AREA(#53976); +#53976 = FILL_AREA_STYLE('',(#53977)); +#53977 = FILL_AREA_STYLE_COLOUR('',#50655); +#53978 = STYLED_ITEM('color',(#53979),#12987); +#53979 = PRESENTATION_STYLE_ASSIGNMENT((#53980)); +#53980 = SURFACE_STYLE_USAGE(.BOTH.,#53981); +#53981 = SURFACE_SIDE_STYLE('',(#53982)); +#53982 = SURFACE_STYLE_FILL_AREA(#53983); +#53983 = FILL_AREA_STYLE('',(#53984)); +#53984 = FILL_AREA_STYLE_COLOUR('',#50655); +#53985 = STYLED_ITEM('color',(#53986),#13014); +#53986 = PRESENTATION_STYLE_ASSIGNMENT((#53987)); +#53987 = SURFACE_STYLE_USAGE(.BOTH.,#53988); +#53988 = SURFACE_SIDE_STYLE('',(#53989)); +#53989 = SURFACE_STYLE_FILL_AREA(#53990); +#53990 = FILL_AREA_STYLE('',(#53991)); +#53991 = FILL_AREA_STYLE_COLOUR('',#50655); +#53992 = STYLED_ITEM('color',(#53993),#13041); +#53993 = PRESENTATION_STYLE_ASSIGNMENT((#53994)); +#53994 = SURFACE_STYLE_USAGE(.BOTH.,#53995); +#53995 = SURFACE_SIDE_STYLE('',(#53996)); +#53996 = SURFACE_STYLE_FILL_AREA(#53997); +#53997 = FILL_AREA_STYLE('',(#53998)); +#53998 = FILL_AREA_STYLE_COLOUR('',#50655); +#53999 = STYLED_ITEM('color',(#54000),#13048); +#54000 = PRESENTATION_STYLE_ASSIGNMENT((#54001)); +#54001 = SURFACE_STYLE_USAGE(.BOTH.,#54002); +#54002 = SURFACE_SIDE_STYLE('',(#54003)); +#54003 = SURFACE_STYLE_FILL_AREA(#54004); +#54004 = FILL_AREA_STYLE('',(#54005)); +#54005 = FILL_AREA_STYLE_COLOUR('',#50691); +#54006 = STYLED_ITEM('color',(#54007),#13095); +#54007 = PRESENTATION_STYLE_ASSIGNMENT((#54008)); +#54008 = SURFACE_STYLE_USAGE(.BOTH.,#54009); +#54009 = SURFACE_SIDE_STYLE('',(#54010)); +#54010 = SURFACE_STYLE_FILL_AREA(#54011); +#54011 = FILL_AREA_STYLE('',(#54012)); +#54012 = FILL_AREA_STYLE_COLOUR('',#50691); +#54013 = STYLED_ITEM('color',(#54014),#13121); +#54014 = PRESENTATION_STYLE_ASSIGNMENT((#54015)); +#54015 = SURFACE_STYLE_USAGE(.BOTH.,#54016); +#54016 = SURFACE_SIDE_STYLE('',(#54017)); +#54017 = SURFACE_STYLE_FILL_AREA(#54018); +#54018 = FILL_AREA_STYLE('',(#54019)); +#54019 = FILL_AREA_STYLE_COLOUR('',#50691); +#54020 = STYLED_ITEM('color',(#54021),#13168); +#54021 = PRESENTATION_STYLE_ASSIGNMENT((#54022)); +#54022 = SURFACE_STYLE_USAGE(.BOTH.,#54023); +#54023 = SURFACE_SIDE_STYLE('',(#54024)); +#54024 = SURFACE_STYLE_FILL_AREA(#54025); +#54025 = FILL_AREA_STYLE('',(#54026)); +#54026 = FILL_AREA_STYLE_COLOUR('',#50691); +#54027 = STYLED_ITEM('color',(#54028),#13565); +#54028 = PRESENTATION_STYLE_ASSIGNMENT((#54029)); +#54029 = SURFACE_STYLE_USAGE(.BOTH.,#54030); +#54030 = SURFACE_SIDE_STYLE('',(#54031)); +#54031 = SURFACE_STYLE_FILL_AREA(#54032); +#54032 = FILL_AREA_STYLE('',(#54033)); +#54033 = FILL_AREA_STYLE_COLOUR('',#50691); +#54034 = STYLED_ITEM('color',(#54035),#13612); +#54035 = PRESENTATION_STYLE_ASSIGNMENT((#54036)); +#54036 = SURFACE_STYLE_USAGE(.BOTH.,#54037); +#54037 = SURFACE_SIDE_STYLE('',(#54038)); +#54038 = SURFACE_STYLE_FILL_AREA(#54039); +#54039 = FILL_AREA_STYLE('',(#54040)); +#54040 = FILL_AREA_STYLE_COLOUR('',#50691); +#54041 = STYLED_ITEM('color',(#54042),#13638); +#54042 = PRESENTATION_STYLE_ASSIGNMENT((#54043)); +#54043 = SURFACE_STYLE_USAGE(.BOTH.,#54044); +#54044 = SURFACE_SIDE_STYLE('',(#54045)); +#54045 = SURFACE_STYLE_FILL_AREA(#54046); +#54046 = FILL_AREA_STYLE('',(#54047)); +#54047 = FILL_AREA_STYLE_COLOUR('',#51035); +#54048 = STYLED_ITEM('color',(#54049),#13693); +#54049 = PRESENTATION_STYLE_ASSIGNMENT((#54050)); +#54050 = SURFACE_STYLE_USAGE(.BOTH.,#54051); +#54051 = SURFACE_SIDE_STYLE('',(#54052)); +#54052 = SURFACE_STYLE_FILL_AREA(#54053); +#54053 = FILL_AREA_STYLE('',(#54054)); +#54054 = FILL_AREA_STYLE_COLOUR('',#50691); +#54055 = STYLED_ITEM('color',(#54056),#13719); +#54056 = PRESENTATION_STYLE_ASSIGNMENT((#54057)); +#54057 = SURFACE_STYLE_USAGE(.BOTH.,#54058); +#54058 = SURFACE_SIDE_STYLE('',(#54059)); +#54059 = SURFACE_STYLE_FILL_AREA(#54060); +#54060 = FILL_AREA_STYLE('',(#54061)); +#54061 = FILL_AREA_STYLE_COLOUR('',#50691); +#54062 = STYLED_ITEM('color',(#54063),#13745); +#54063 = PRESENTATION_STYLE_ASSIGNMENT((#54064)); +#54064 = SURFACE_STYLE_USAGE(.BOTH.,#54065); +#54065 = SURFACE_SIDE_STYLE('',(#54066)); +#54066 = SURFACE_STYLE_FILL_AREA(#54067); +#54067 = FILL_AREA_STYLE('',(#54068)); +#54068 = FILL_AREA_STYLE_COLOUR('',#50691); +#54069 = STYLED_ITEM('color',(#54070),#13771); +#54070 = PRESENTATION_STYLE_ASSIGNMENT((#54071)); +#54071 = SURFACE_STYLE_USAGE(.BOTH.,#54072); +#54072 = SURFACE_SIDE_STYLE('',(#54073)); +#54073 = SURFACE_STYLE_FILL_AREA(#54074); +#54074 = FILL_AREA_STYLE('',(#54075)); +#54075 = FILL_AREA_STYLE_COLOUR('',#50655); +#54076 = STYLED_ITEM('color',(#54077),#14056); +#54077 = PRESENTATION_STYLE_ASSIGNMENT((#54078)); +#54078 = SURFACE_STYLE_USAGE(.BOTH.,#54079); +#54079 = SURFACE_SIDE_STYLE('',(#54080)); +#54080 = SURFACE_STYLE_FILL_AREA(#54081); +#54081 = FILL_AREA_STYLE('',(#54082)); +#54082 = FILL_AREA_STYLE_COLOUR('',#50655); +#54083 = STYLED_ITEM('color',(#54084),#14341); +#54084 = PRESENTATION_STYLE_ASSIGNMENT((#54085)); +#54085 = SURFACE_STYLE_USAGE(.BOTH.,#54086); +#54086 = SURFACE_SIDE_STYLE('',(#54087)); +#54087 = SURFACE_STYLE_FILL_AREA(#54088); +#54088 = FILL_AREA_STYLE('',(#54089)); +#54089 = FILL_AREA_STYLE_COLOUR('',#50691); +#54090 = STYLED_ITEM('color',(#54091),#14386); +#54091 = PRESENTATION_STYLE_ASSIGNMENT((#54092)); +#54092 = SURFACE_STYLE_USAGE(.BOTH.,#54093); +#54093 = SURFACE_SIDE_STYLE('',(#54094)); +#54094 = SURFACE_STYLE_FILL_AREA(#54095); +#54095 = FILL_AREA_STYLE('',(#54096)); +#54096 = FILL_AREA_STYLE_COLOUR('',#50655); +#54097 = STYLED_ITEM('color',(#54098),#14440); +#54098 = PRESENTATION_STYLE_ASSIGNMENT((#54099)); +#54099 = SURFACE_STYLE_USAGE(.BOTH.,#54100); +#54100 = SURFACE_SIDE_STYLE('',(#54101)); +#54101 = SURFACE_STYLE_FILL_AREA(#54102); +#54102 = FILL_AREA_STYLE('',(#54103)); +#54103 = FILL_AREA_STYLE_COLOUR('',#50655); +#54104 = STYLED_ITEM('color',(#54105),#14658); +#54105 = PRESENTATION_STYLE_ASSIGNMENT((#54106)); +#54106 = SURFACE_STYLE_USAGE(.BOTH.,#54107); +#54107 = SURFACE_SIDE_STYLE('',(#54108)); +#54108 = SURFACE_STYLE_FILL_AREA(#54109); +#54109 = FILL_AREA_STYLE('',(#54110)); +#54110 = FILL_AREA_STYLE_COLOUR('',#50655); +#54111 = STYLED_ITEM('color',(#54112),#14903); +#54112 = PRESENTATION_STYLE_ASSIGNMENT((#54113)); +#54113 = SURFACE_STYLE_USAGE(.BOTH.,#54114); +#54114 = SURFACE_SIDE_STYLE('',(#54115)); +#54115 = SURFACE_STYLE_FILL_AREA(#54116); +#54116 = FILL_AREA_STYLE('',(#54117)); +#54117 = FILL_AREA_STYLE_COLOUR('',#50655); +#54118 = STYLED_ITEM('color',(#54119),#14930); +#54119 = PRESENTATION_STYLE_ASSIGNMENT((#54120)); +#54120 = SURFACE_STYLE_USAGE(.BOTH.,#54121); +#54121 = SURFACE_SIDE_STYLE('',(#54122)); +#54122 = SURFACE_STYLE_FILL_AREA(#54123); +#54123 = FILL_AREA_STYLE('',(#54124)); +#54124 = FILL_AREA_STYLE_COLOUR('',#50691); +#54125 = STYLED_ITEM('color',(#54126),#14975); +#54126 = PRESENTATION_STYLE_ASSIGNMENT((#54127)); +#54127 = SURFACE_STYLE_USAGE(.BOTH.,#54128); +#54128 = SURFACE_SIDE_STYLE('',(#54129)); +#54129 = SURFACE_STYLE_FILL_AREA(#54130); +#54130 = FILL_AREA_STYLE('',(#54131)); +#54131 = FILL_AREA_STYLE_COLOUR('',#50655); +#54132 = STYLED_ITEM('color',(#54133),#15260); +#54133 = PRESENTATION_STYLE_ASSIGNMENT((#54134)); +#54134 = SURFACE_STYLE_USAGE(.BOTH.,#54135); +#54135 = SURFACE_SIDE_STYLE('',(#54136)); +#54136 = SURFACE_STYLE_FILL_AREA(#54137); +#54137 = FILL_AREA_STYLE('',(#54138)); +#54138 = FILL_AREA_STYLE_COLOUR('',#50655); +#54139 = STYLED_ITEM('color',(#54140),#15545); +#54140 = PRESENTATION_STYLE_ASSIGNMENT((#54141)); +#54141 = SURFACE_STYLE_USAGE(.BOTH.,#54142); +#54142 = SURFACE_SIDE_STYLE('',(#54143)); +#54143 = SURFACE_STYLE_FILL_AREA(#54144); +#54144 = FILL_AREA_STYLE('',(#54145)); +#54145 = FILL_AREA_STYLE_COLOUR('',#50691); +#54146 = STYLED_ITEM('color',(#54147),#15590); +#54147 = PRESENTATION_STYLE_ASSIGNMENT((#54148)); +#54148 = SURFACE_STYLE_USAGE(.BOTH.,#54149); +#54149 = SURFACE_SIDE_STYLE('',(#54150)); +#54150 = SURFACE_STYLE_FILL_AREA(#54151); +#54151 = FILL_AREA_STYLE('',(#54152)); +#54152 = FILL_AREA_STYLE_COLOUR('',#50655); +#54153 = STYLED_ITEM('color',(#54154),#15644); +#54154 = PRESENTATION_STYLE_ASSIGNMENT((#54155)); +#54155 = SURFACE_STYLE_USAGE(.BOTH.,#54156); +#54156 = SURFACE_SIDE_STYLE('',(#54157)); +#54157 = SURFACE_STYLE_FILL_AREA(#54158); +#54158 = FILL_AREA_STYLE('',(#54159)); +#54159 = FILL_AREA_STYLE_COLOUR('',#50655); +#54160 = STYLED_ITEM('color',(#54161),#15862); +#54161 = PRESENTATION_STYLE_ASSIGNMENT((#54162)); +#54162 = SURFACE_STYLE_USAGE(.BOTH.,#54163); +#54163 = SURFACE_SIDE_STYLE('',(#54164)); +#54164 = SURFACE_STYLE_FILL_AREA(#54165); +#54165 = FILL_AREA_STYLE('',(#54166)); +#54166 = FILL_AREA_STYLE_COLOUR('',#50655); +#54167 = STYLED_ITEM('color',(#54168),#16107); +#54168 = PRESENTATION_STYLE_ASSIGNMENT((#54169)); +#54169 = SURFACE_STYLE_USAGE(.BOTH.,#54170); +#54170 = SURFACE_SIDE_STYLE('',(#54171)); +#54171 = SURFACE_STYLE_FILL_AREA(#54172); +#54172 = FILL_AREA_STYLE('',(#54173)); +#54173 = FILL_AREA_STYLE_COLOUR('',#50655); +#54174 = STYLED_ITEM('color',(#54175),#16134); +#54175 = PRESENTATION_STYLE_ASSIGNMENT((#54176)); +#54176 = SURFACE_STYLE_USAGE(.BOTH.,#54177); +#54177 = SURFACE_SIDE_STYLE('',(#54178)); +#54178 = SURFACE_STYLE_FILL_AREA(#54179); +#54179 = FILL_AREA_STYLE('',(#54180)); +#54180 = FILL_AREA_STYLE_COLOUR('',#50691); +#54181 = STYLED_ITEM('color',(#54182),#16179); +#54182 = PRESENTATION_STYLE_ASSIGNMENT((#54183)); +#54183 = SURFACE_STYLE_USAGE(.BOTH.,#54184); +#54184 = SURFACE_SIDE_STYLE('',(#54185)); +#54185 = SURFACE_STYLE_FILL_AREA(#54186); +#54186 = FILL_AREA_STYLE('',(#54187)); +#54187 = FILL_AREA_STYLE_COLOUR('',#50655); +#54188 = STYLED_ITEM('color',(#54189),#16464); +#54189 = PRESENTATION_STYLE_ASSIGNMENT((#54190)); +#54190 = SURFACE_STYLE_USAGE(.BOTH.,#54191); +#54191 = SURFACE_SIDE_STYLE('',(#54192)); +#54192 = SURFACE_STYLE_FILL_AREA(#54193); +#54193 = FILL_AREA_STYLE('',(#54194)); +#54194 = FILL_AREA_STYLE_COLOUR('',#50655); +#54195 = STYLED_ITEM('color',(#54196),#16749); +#54196 = PRESENTATION_STYLE_ASSIGNMENT((#54197)); +#54197 = SURFACE_STYLE_USAGE(.BOTH.,#54198); +#54198 = SURFACE_SIDE_STYLE('',(#54199)); +#54199 = SURFACE_STYLE_FILL_AREA(#54200); +#54200 = FILL_AREA_STYLE('',(#54201)); +#54201 = FILL_AREA_STYLE_COLOUR('',#50691); +#54202 = STYLED_ITEM('color',(#54203),#16794); +#54203 = PRESENTATION_STYLE_ASSIGNMENT((#54204)); +#54204 = SURFACE_STYLE_USAGE(.BOTH.,#54205); +#54205 = SURFACE_SIDE_STYLE('',(#54206)); +#54206 = SURFACE_STYLE_FILL_AREA(#54207); +#54207 = FILL_AREA_STYLE('',(#54208)); +#54208 = FILL_AREA_STYLE_COLOUR('',#50655); +#54209 = STYLED_ITEM('color',(#54210),#16848); +#54210 = PRESENTATION_STYLE_ASSIGNMENT((#54211)); +#54211 = SURFACE_STYLE_USAGE(.BOTH.,#54212); +#54212 = SURFACE_SIDE_STYLE('',(#54213)); +#54213 = SURFACE_STYLE_FILL_AREA(#54214); +#54214 = FILL_AREA_STYLE('',(#54215)); +#54215 = FILL_AREA_STYLE_COLOUR('',#50655); +#54216 = STYLED_ITEM('color',(#54217),#17066); +#54217 = PRESENTATION_STYLE_ASSIGNMENT((#54218)); +#54218 = SURFACE_STYLE_USAGE(.BOTH.,#54219); +#54219 = SURFACE_SIDE_STYLE('',(#54220)); +#54220 = SURFACE_STYLE_FILL_AREA(#54221); +#54221 = FILL_AREA_STYLE('',(#54222)); +#54222 = FILL_AREA_STYLE_COLOUR('',#50655); +#54223 = STYLED_ITEM('color',(#54224),#17311); +#54224 = PRESENTATION_STYLE_ASSIGNMENT((#54225)); +#54225 = SURFACE_STYLE_USAGE(.BOTH.,#54226); +#54226 = SURFACE_SIDE_STYLE('',(#54227)); +#54227 = SURFACE_STYLE_FILL_AREA(#54228); +#54228 = FILL_AREA_STYLE('',(#54229)); +#54229 = FILL_AREA_STYLE_COLOUR('',#50655); +#54230 = STYLED_ITEM('color',(#54231),#17338); +#54231 = PRESENTATION_STYLE_ASSIGNMENT((#54232)); +#54232 = SURFACE_STYLE_USAGE(.BOTH.,#54233); +#54233 = SURFACE_SIDE_STYLE('',(#54234)); +#54234 = SURFACE_STYLE_FILL_AREA(#54235); +#54235 = FILL_AREA_STYLE('',(#54236)); +#54236 = FILL_AREA_STYLE_COLOUR('',#50691); +#54237 = STYLED_ITEM('color',(#54238),#17383); +#54238 = PRESENTATION_STYLE_ASSIGNMENT((#54239)); +#54239 = SURFACE_STYLE_USAGE(.BOTH.,#54240); +#54240 = SURFACE_SIDE_STYLE('',(#54241)); +#54241 = SURFACE_STYLE_FILL_AREA(#54242); +#54242 = FILL_AREA_STYLE('',(#54243)); +#54243 = FILL_AREA_STYLE_COLOUR('',#50655); +#54244 = STYLED_ITEM('color',(#54245),#17668); +#54245 = PRESENTATION_STYLE_ASSIGNMENT((#54246)); +#54246 = SURFACE_STYLE_USAGE(.BOTH.,#54247); +#54247 = SURFACE_SIDE_STYLE('',(#54248)); +#54248 = SURFACE_STYLE_FILL_AREA(#54249); +#54249 = FILL_AREA_STYLE('',(#54250)); +#54250 = FILL_AREA_STYLE_COLOUR('',#50655); +#54251 = STYLED_ITEM('color',(#54252),#17913); +#54252 = PRESENTATION_STYLE_ASSIGNMENT((#54253)); +#54253 = SURFACE_STYLE_USAGE(.BOTH.,#54254); +#54254 = SURFACE_SIDE_STYLE('',(#54255)); +#54255 = SURFACE_STYLE_FILL_AREA(#54256); +#54256 = FILL_AREA_STYLE('',(#54257)); +#54257 = FILL_AREA_STYLE_COLOUR('',#50691); +#54258 = STYLED_ITEM('color',(#54259),#17958); +#54259 = PRESENTATION_STYLE_ASSIGNMENT((#54260)); +#54260 = SURFACE_STYLE_USAGE(.BOTH.,#54261); +#54261 = SURFACE_SIDE_STYLE('',(#54262)); +#54262 = SURFACE_STYLE_FILL_AREA(#54263); +#54263 = FILL_AREA_STYLE('',(#54264)); +#54264 = FILL_AREA_STYLE_COLOUR('',#50655); +#54265 = STYLED_ITEM('color',(#54266),#17985); +#54266 = PRESENTATION_STYLE_ASSIGNMENT((#54267)); +#54267 = SURFACE_STYLE_USAGE(.BOTH.,#54268); +#54268 = SURFACE_SIDE_STYLE('',(#54269)); +#54269 = SURFACE_STYLE_FILL_AREA(#54270); +#54270 = FILL_AREA_STYLE('',(#54271)); +#54271 = FILL_AREA_STYLE_COLOUR('',#50691); +#54272 = STYLED_ITEM('color',(#54273),#17992); +#54273 = PRESENTATION_STYLE_ASSIGNMENT((#54274)); +#54274 = SURFACE_STYLE_USAGE(.BOTH.,#54275); +#54275 = SURFACE_SIDE_STYLE('',(#54276)); +#54276 = SURFACE_STYLE_FILL_AREA(#54277); +#54277 = FILL_AREA_STYLE('',(#54278)); +#54278 = FILL_AREA_STYLE_COLOUR('',#50655); +#54279 = STYLED_ITEM('color',(#54280),#18021); +#54280 = PRESENTATION_STYLE_ASSIGNMENT((#54281)); +#54281 = SURFACE_STYLE_USAGE(.BOTH.,#54282); +#54282 = SURFACE_SIDE_STYLE('',(#54283)); +#54283 = SURFACE_STYLE_FILL_AREA(#54284); +#54284 = FILL_AREA_STYLE('',(#54285)); +#54285 = FILL_AREA_STYLE_COLOUR('',#50655); +#54286 = STYLED_ITEM('color',(#54287),#18050); +#54287 = PRESENTATION_STYLE_ASSIGNMENT((#54288)); +#54288 = SURFACE_STYLE_USAGE(.BOTH.,#54289); +#54289 = SURFACE_SIDE_STYLE('',(#54290)); +#54290 = SURFACE_STYLE_FILL_AREA(#54291); +#54291 = FILL_AREA_STYLE('',(#54292)); +#54292 = FILL_AREA_STYLE_COLOUR('',#50655); +#54293 = STYLED_ITEM('color',(#54294),#18079); +#54294 = PRESENTATION_STYLE_ASSIGNMENT((#54295)); +#54295 = SURFACE_STYLE_USAGE(.BOTH.,#54296); +#54296 = SURFACE_SIDE_STYLE('',(#54297)); +#54297 = SURFACE_STYLE_FILL_AREA(#54298); +#54298 = FILL_AREA_STYLE('',(#54299)); +#54299 = FILL_AREA_STYLE_COLOUR('',#50655); +#54300 = STYLED_ITEM('color',(#54301),#18108); +#54301 = PRESENTATION_STYLE_ASSIGNMENT((#54302)); +#54302 = SURFACE_STYLE_USAGE(.BOTH.,#54303); +#54303 = SURFACE_SIDE_STYLE('',(#54304)); +#54304 = SURFACE_STYLE_FILL_AREA(#54305); +#54305 = FILL_AREA_STYLE('',(#54306)); +#54306 = FILL_AREA_STYLE_COLOUR('',#50655); +#54307 = STYLED_ITEM('color',(#54308),#18137); +#54308 = PRESENTATION_STYLE_ASSIGNMENT((#54309)); +#54309 = SURFACE_STYLE_USAGE(.BOTH.,#54310); +#54310 = SURFACE_SIDE_STYLE('',(#54311)); +#54311 = SURFACE_STYLE_FILL_AREA(#54312); +#54312 = FILL_AREA_STYLE('',(#54313)); +#54313 = FILL_AREA_STYLE_COLOUR('',#50655); +#54314 = STYLED_ITEM('color',(#54315),#18166); +#54315 = PRESENTATION_STYLE_ASSIGNMENT((#54316)); +#54316 = SURFACE_STYLE_USAGE(.BOTH.,#54317); +#54317 = SURFACE_SIDE_STYLE('',(#54318)); +#54318 = SURFACE_STYLE_FILL_AREA(#54319); +#54319 = FILL_AREA_STYLE('',(#54320)); +#54320 = FILL_AREA_STYLE_COLOUR('',#50655); +#54321 = STYLED_ITEM('color',(#54322),#18195); +#54322 = PRESENTATION_STYLE_ASSIGNMENT((#54323)); +#54323 = SURFACE_STYLE_USAGE(.BOTH.,#54324); +#54324 = SURFACE_SIDE_STYLE('',(#54325)); +#54325 = SURFACE_STYLE_FILL_AREA(#54326); +#54326 = FILL_AREA_STYLE('',(#54327)); +#54327 = FILL_AREA_STYLE_COLOUR('',#51035); +#54328 = STYLED_ITEM('color',(#54329),#18199); +#54329 = PRESENTATION_STYLE_ASSIGNMENT((#54330)); +#54330 = SURFACE_STYLE_USAGE(.BOTH.,#54331); +#54331 = SURFACE_SIDE_STYLE('',(#54332)); +#54332 = SURFACE_STYLE_FILL_AREA(#54333); +#54333 = FILL_AREA_STYLE('',(#54334)); +#54334 = FILL_AREA_STYLE_COLOUR('',#50655); +#54335 = STYLED_ITEM('color',(#54336),#18226); +#54336 = PRESENTATION_STYLE_ASSIGNMENT((#54337)); +#54337 = SURFACE_STYLE_USAGE(.BOTH.,#54338); +#54338 = SURFACE_SIDE_STYLE('',(#54339)); +#54339 = SURFACE_STYLE_FILL_AREA(#54340); +#54340 = FILL_AREA_STYLE('',(#54341)); +#54341 = FILL_AREA_STYLE_COLOUR('',#50655); +#54342 = STYLED_ITEM('color',(#54343),#18253); +#54343 = PRESENTATION_STYLE_ASSIGNMENT((#54344)); +#54344 = SURFACE_STYLE_USAGE(.BOTH.,#54345); +#54345 = SURFACE_SIDE_STYLE('',(#54346)); +#54346 = SURFACE_STYLE_FILL_AREA(#54347); +#54347 = FILL_AREA_STYLE('',(#54348)); +#54348 = FILL_AREA_STYLE_COLOUR('',#50655); +#54349 = STYLED_ITEM('color',(#54350),#18280); +#54350 = PRESENTATION_STYLE_ASSIGNMENT((#54351)); +#54351 = SURFACE_STYLE_USAGE(.BOTH.,#54352); +#54352 = SURFACE_SIDE_STYLE('',(#54353)); +#54353 = SURFACE_STYLE_FILL_AREA(#54354); +#54354 = FILL_AREA_STYLE('',(#54355)); +#54355 = FILL_AREA_STYLE_COLOUR('',#50655); +#54356 = STYLED_ITEM('color',(#54357),#18307); +#54357 = PRESENTATION_STYLE_ASSIGNMENT((#54358)); +#54358 = SURFACE_STYLE_USAGE(.BOTH.,#54359); +#54359 = SURFACE_SIDE_STYLE('',(#54360)); +#54360 = SURFACE_STYLE_FILL_AREA(#54361); +#54361 = FILL_AREA_STYLE('',(#54362)); +#54362 = FILL_AREA_STYLE_COLOUR('',#50655); +#54363 = STYLED_ITEM('color',(#54364),#18334); +#54364 = PRESENTATION_STYLE_ASSIGNMENT((#54365)); +#54365 = SURFACE_STYLE_USAGE(.BOTH.,#54366); +#54366 = SURFACE_SIDE_STYLE('',(#54367)); +#54367 = SURFACE_STYLE_FILL_AREA(#54368); +#54368 = FILL_AREA_STYLE('',(#54369)); +#54369 = FILL_AREA_STYLE_COLOUR('',#50655); +#54370 = STYLED_ITEM('color',(#54371),#18361); +#54371 = PRESENTATION_STYLE_ASSIGNMENT((#54372)); +#54372 = SURFACE_STYLE_USAGE(.BOTH.,#54373); +#54373 = SURFACE_SIDE_STYLE('',(#54374)); +#54374 = SURFACE_STYLE_FILL_AREA(#54375); +#54375 = FILL_AREA_STYLE('',(#54376)); +#54376 = FILL_AREA_STYLE_COLOUR('',#50655); +#54377 = STYLED_ITEM('color',(#54378),#18388); +#54378 = PRESENTATION_STYLE_ASSIGNMENT((#54379)); +#54379 = SURFACE_STYLE_USAGE(.BOTH.,#54380); +#54380 = SURFACE_SIDE_STYLE('',(#54381)); +#54381 = SURFACE_STYLE_FILL_AREA(#54382); +#54382 = FILL_AREA_STYLE('',(#54383)); +#54383 = FILL_AREA_STYLE_COLOUR('',#50655); +#54384 = STYLED_ITEM('color',(#54385),#18395); +#54385 = PRESENTATION_STYLE_ASSIGNMENT((#54386)); +#54386 = SURFACE_STYLE_USAGE(.BOTH.,#54387); +#54387 = SURFACE_SIDE_STYLE('',(#54388)); +#54388 = SURFACE_STYLE_FILL_AREA(#54389); +#54389 = FILL_AREA_STYLE('',(#54390)); +#54390 = FILL_AREA_STYLE_COLOUR('',#50655); +#54391 = STYLED_ITEM('color',(#54392),#18422); +#54392 = PRESENTATION_STYLE_ASSIGNMENT((#54393)); +#54393 = SURFACE_STYLE_USAGE(.BOTH.,#54394); +#54394 = SURFACE_SIDE_STYLE('',(#54395)); +#54395 = SURFACE_STYLE_FILL_AREA(#54396); +#54396 = FILL_AREA_STYLE('',(#54397)); +#54397 = FILL_AREA_STYLE_COLOUR('',#50655); +#54398 = STYLED_ITEM('color',(#54399),#18449); +#54399 = PRESENTATION_STYLE_ASSIGNMENT((#54400)); +#54400 = SURFACE_STYLE_USAGE(.BOTH.,#54401); +#54401 = SURFACE_SIDE_STYLE('',(#54402)); +#54402 = SURFACE_STYLE_FILL_AREA(#54403); +#54403 = FILL_AREA_STYLE('',(#54404)); +#54404 = FILL_AREA_STYLE_COLOUR('',#50655); +#54405 = STYLED_ITEM('color',(#54406),#18476); +#54406 = PRESENTATION_STYLE_ASSIGNMENT((#54407)); +#54407 = SURFACE_STYLE_USAGE(.BOTH.,#54408); +#54408 = SURFACE_SIDE_STYLE('',(#54409)); +#54409 = SURFACE_STYLE_FILL_AREA(#54410); +#54410 = FILL_AREA_STYLE('',(#54411)); +#54411 = FILL_AREA_STYLE_COLOUR('',#50655); +#54412 = STYLED_ITEM('color',(#54413),#18503); +#54413 = PRESENTATION_STYLE_ASSIGNMENT((#54414)); +#54414 = SURFACE_STYLE_USAGE(.BOTH.,#54415); +#54415 = SURFACE_SIDE_STYLE('',(#54416)); +#54416 = SURFACE_STYLE_FILL_AREA(#54417); +#54417 = FILL_AREA_STYLE('',(#54418)); +#54418 = FILL_AREA_STYLE_COLOUR('',#50655); +#54419 = STYLED_ITEM('color',(#54420),#18530); +#54420 = PRESENTATION_STYLE_ASSIGNMENT((#54421)); +#54421 = SURFACE_STYLE_USAGE(.BOTH.,#54422); +#54422 = SURFACE_SIDE_STYLE('',(#54423)); +#54423 = SURFACE_STYLE_FILL_AREA(#54424); +#54424 = FILL_AREA_STYLE('',(#54425)); +#54425 = FILL_AREA_STYLE_COLOUR('',#50655); +#54426 = STYLED_ITEM('color',(#54427),#18557); +#54427 = PRESENTATION_STYLE_ASSIGNMENT((#54428)); +#54428 = SURFACE_STYLE_USAGE(.BOTH.,#54429); +#54429 = SURFACE_SIDE_STYLE('',(#54430)); +#54430 = SURFACE_STYLE_FILL_AREA(#54431); +#54431 = FILL_AREA_STYLE('',(#54432)); +#54432 = FILL_AREA_STYLE_COLOUR('',#50655); +#54433 = STYLED_ITEM('color',(#54434),#18584); +#54434 = PRESENTATION_STYLE_ASSIGNMENT((#54435)); +#54435 = SURFACE_STYLE_USAGE(.BOTH.,#54436); +#54436 = SURFACE_SIDE_STYLE('',(#54437)); +#54437 = SURFACE_STYLE_FILL_AREA(#54438); +#54438 = FILL_AREA_STYLE('',(#54439)); +#54439 = FILL_AREA_STYLE_COLOUR('',#50655); +#54440 = STYLED_ITEM('color',(#54441),#18591); +#54441 = PRESENTATION_STYLE_ASSIGNMENT((#54442)); +#54442 = SURFACE_STYLE_USAGE(.BOTH.,#54443); +#54443 = SURFACE_SIDE_STYLE('',(#54444)); +#54444 = SURFACE_STYLE_FILL_AREA(#54445); +#54445 = FILL_AREA_STYLE('',(#54446)); +#54446 = FILL_AREA_STYLE_COLOUR('',#50655); +#54447 = STYLED_ITEM('color',(#54448),#18618); +#54448 = PRESENTATION_STYLE_ASSIGNMENT((#54449)); +#54449 = SURFACE_STYLE_USAGE(.BOTH.,#54450); +#54450 = SURFACE_SIDE_STYLE('',(#54451)); +#54451 = SURFACE_STYLE_FILL_AREA(#54452); +#54452 = FILL_AREA_STYLE('',(#54453)); +#54453 = FILL_AREA_STYLE_COLOUR('',#50655); +#54454 = STYLED_ITEM('color',(#54455),#18645); +#54455 = PRESENTATION_STYLE_ASSIGNMENT((#54456)); +#54456 = SURFACE_STYLE_USAGE(.BOTH.,#54457); +#54457 = SURFACE_SIDE_STYLE('',(#54458)); +#54458 = SURFACE_STYLE_FILL_AREA(#54459); +#54459 = FILL_AREA_STYLE('',(#54460)); +#54460 = FILL_AREA_STYLE_COLOUR('',#50655); +#54461 = STYLED_ITEM('color',(#54462),#18672); +#54462 = PRESENTATION_STYLE_ASSIGNMENT((#54463)); +#54463 = SURFACE_STYLE_USAGE(.BOTH.,#54464); +#54464 = SURFACE_SIDE_STYLE('',(#54465)); +#54465 = SURFACE_STYLE_FILL_AREA(#54466); +#54466 = FILL_AREA_STYLE('',(#54467)); +#54467 = FILL_AREA_STYLE_COLOUR('',#50655); +#54468 = STYLED_ITEM('color',(#54469),#18699); +#54469 = PRESENTATION_STYLE_ASSIGNMENT((#54470)); +#54470 = SURFACE_STYLE_USAGE(.BOTH.,#54471); +#54471 = SURFACE_SIDE_STYLE('',(#54472)); +#54472 = SURFACE_STYLE_FILL_AREA(#54473); +#54473 = FILL_AREA_STYLE('',(#54474)); +#54474 = FILL_AREA_STYLE_COLOUR('',#50655); +#54475 = STYLED_ITEM('color',(#54476),#18726); +#54476 = PRESENTATION_STYLE_ASSIGNMENT((#54477)); +#54477 = SURFACE_STYLE_USAGE(.BOTH.,#54478); +#54478 = SURFACE_SIDE_STYLE('',(#54479)); +#54479 = SURFACE_STYLE_FILL_AREA(#54480); +#54480 = FILL_AREA_STYLE('',(#54481)); +#54481 = FILL_AREA_STYLE_COLOUR('',#50655); +#54482 = STYLED_ITEM('color',(#54483),#18753); +#54483 = PRESENTATION_STYLE_ASSIGNMENT((#54484)); +#54484 = SURFACE_STYLE_USAGE(.BOTH.,#54485); +#54485 = SURFACE_SIDE_STYLE('',(#54486)); +#54486 = SURFACE_STYLE_FILL_AREA(#54487); +#54487 = FILL_AREA_STYLE('',(#54488)); +#54488 = FILL_AREA_STYLE_COLOUR('',#50655); +#54489 = STYLED_ITEM('color',(#54490),#18780); +#54490 = PRESENTATION_STYLE_ASSIGNMENT((#54491)); +#54491 = SURFACE_STYLE_USAGE(.BOTH.,#54492); +#54492 = SURFACE_SIDE_STYLE('',(#54493)); +#54493 = SURFACE_STYLE_FILL_AREA(#54494); +#54494 = FILL_AREA_STYLE('',(#54495)); +#54495 = FILL_AREA_STYLE_COLOUR('',#50655); +#54496 = STYLED_ITEM('color',(#54497),#18787); +#54497 = PRESENTATION_STYLE_ASSIGNMENT((#54498)); +#54498 = SURFACE_STYLE_USAGE(.BOTH.,#54499); +#54499 = SURFACE_SIDE_STYLE('',(#54500)); +#54500 = SURFACE_STYLE_FILL_AREA(#54501); +#54501 = FILL_AREA_STYLE('',(#54502)); +#54502 = FILL_AREA_STYLE_COLOUR('',#50655); +#54503 = STYLED_ITEM('color',(#54504),#18814); +#54504 = PRESENTATION_STYLE_ASSIGNMENT((#54505)); +#54505 = SURFACE_STYLE_USAGE(.BOTH.,#54506); +#54506 = SURFACE_SIDE_STYLE('',(#54507)); +#54507 = SURFACE_STYLE_FILL_AREA(#54508); +#54508 = FILL_AREA_STYLE('',(#54509)); +#54509 = FILL_AREA_STYLE_COLOUR('',#50655); +#54510 = STYLED_ITEM('color',(#54511),#18841); +#54511 = PRESENTATION_STYLE_ASSIGNMENT((#54512)); +#54512 = SURFACE_STYLE_USAGE(.BOTH.,#54513); +#54513 = SURFACE_SIDE_STYLE('',(#54514)); +#54514 = SURFACE_STYLE_FILL_AREA(#54515); +#54515 = FILL_AREA_STYLE('',(#54516)); +#54516 = FILL_AREA_STYLE_COLOUR('',#50655); +#54517 = STYLED_ITEM('color',(#54518),#18868); +#54518 = PRESENTATION_STYLE_ASSIGNMENT((#54519)); +#54519 = SURFACE_STYLE_USAGE(.BOTH.,#54520); +#54520 = SURFACE_SIDE_STYLE('',(#54521)); +#54521 = SURFACE_STYLE_FILL_AREA(#54522); +#54522 = FILL_AREA_STYLE('',(#54523)); +#54523 = FILL_AREA_STYLE_COLOUR('',#50655); +#54524 = STYLED_ITEM('color',(#54525),#18895); +#54525 = PRESENTATION_STYLE_ASSIGNMENT((#54526)); +#54526 = SURFACE_STYLE_USAGE(.BOTH.,#54527); +#54527 = SURFACE_SIDE_STYLE('',(#54528)); +#54528 = SURFACE_STYLE_FILL_AREA(#54529); +#54529 = FILL_AREA_STYLE('',(#54530)); +#54530 = FILL_AREA_STYLE_COLOUR('',#50655); +#54531 = STYLED_ITEM('color',(#54532),#18922); +#54532 = PRESENTATION_STYLE_ASSIGNMENT((#54533)); +#54533 = SURFACE_STYLE_USAGE(.BOTH.,#54534); +#54534 = SURFACE_SIDE_STYLE('',(#54535)); +#54535 = SURFACE_STYLE_FILL_AREA(#54536); +#54536 = FILL_AREA_STYLE('',(#54537)); +#54537 = FILL_AREA_STYLE_COLOUR('',#50655); +#54538 = STYLED_ITEM('color',(#54539),#18949); +#54539 = PRESENTATION_STYLE_ASSIGNMENT((#54540)); +#54540 = SURFACE_STYLE_USAGE(.BOTH.,#54541); +#54541 = SURFACE_SIDE_STYLE('',(#54542)); +#54542 = SURFACE_STYLE_FILL_AREA(#54543); +#54543 = FILL_AREA_STYLE('',(#54544)); +#54544 = FILL_AREA_STYLE_COLOUR('',#50655); +#54545 = STYLED_ITEM('color',(#54546),#18976); +#54546 = PRESENTATION_STYLE_ASSIGNMENT((#54547)); +#54547 = SURFACE_STYLE_USAGE(.BOTH.,#54548); +#54548 = SURFACE_SIDE_STYLE('',(#54549)); +#54549 = SURFACE_STYLE_FILL_AREA(#54550); +#54550 = FILL_AREA_STYLE('',(#54551)); +#54551 = FILL_AREA_STYLE_COLOUR('',#50655); +#54552 = STYLED_ITEM('color',(#54553),#18983); +#54553 = PRESENTATION_STYLE_ASSIGNMENT((#54554)); +#54554 = SURFACE_STYLE_USAGE(.BOTH.,#54555); +#54555 = SURFACE_SIDE_STYLE('',(#54556)); +#54556 = SURFACE_STYLE_FILL_AREA(#54557); +#54557 = FILL_AREA_STYLE('',(#54558)); +#54558 = FILL_AREA_STYLE_COLOUR('',#50655); +#54559 = STYLED_ITEM('color',(#54560),#19010); +#54560 = PRESENTATION_STYLE_ASSIGNMENT((#54561)); +#54561 = SURFACE_STYLE_USAGE(.BOTH.,#54562); +#54562 = SURFACE_SIDE_STYLE('',(#54563)); +#54563 = SURFACE_STYLE_FILL_AREA(#54564); +#54564 = FILL_AREA_STYLE('',(#54565)); +#54565 = FILL_AREA_STYLE_COLOUR('',#50655); +#54566 = STYLED_ITEM('color',(#54567),#19037); +#54567 = PRESENTATION_STYLE_ASSIGNMENT((#54568)); +#54568 = SURFACE_STYLE_USAGE(.BOTH.,#54569); +#54569 = SURFACE_SIDE_STYLE('',(#54570)); +#54570 = SURFACE_STYLE_FILL_AREA(#54571); +#54571 = FILL_AREA_STYLE('',(#54572)); +#54572 = FILL_AREA_STYLE_COLOUR('',#50655); +#54573 = STYLED_ITEM('color',(#54574),#19064); +#54574 = PRESENTATION_STYLE_ASSIGNMENT((#54575)); +#54575 = SURFACE_STYLE_USAGE(.BOTH.,#54576); +#54576 = SURFACE_SIDE_STYLE('',(#54577)); +#54577 = SURFACE_STYLE_FILL_AREA(#54578); +#54578 = FILL_AREA_STYLE('',(#54579)); +#54579 = FILL_AREA_STYLE_COLOUR('',#50655); +#54580 = STYLED_ITEM('color',(#54581),#19091); +#54581 = PRESENTATION_STYLE_ASSIGNMENT((#54582)); +#54582 = SURFACE_STYLE_USAGE(.BOTH.,#54583); +#54583 = SURFACE_SIDE_STYLE('',(#54584)); +#54584 = SURFACE_STYLE_FILL_AREA(#54585); +#54585 = FILL_AREA_STYLE('',(#54586)); +#54586 = FILL_AREA_STYLE_COLOUR('',#50655); +#54587 = STYLED_ITEM('color',(#54588),#19118); +#54588 = PRESENTATION_STYLE_ASSIGNMENT((#54589)); +#54589 = SURFACE_STYLE_USAGE(.BOTH.,#54590); +#54590 = SURFACE_SIDE_STYLE('',(#54591)); +#54591 = SURFACE_STYLE_FILL_AREA(#54592); +#54592 = FILL_AREA_STYLE('',(#54593)); +#54593 = FILL_AREA_STYLE_COLOUR('',#50655); +#54594 = STYLED_ITEM('color',(#54595),#19145); +#54595 = PRESENTATION_STYLE_ASSIGNMENT((#54596)); +#54596 = SURFACE_STYLE_USAGE(.BOTH.,#54597); +#54597 = SURFACE_SIDE_STYLE('',(#54598)); +#54598 = SURFACE_STYLE_FILL_AREA(#54599); +#54599 = FILL_AREA_STYLE('',(#54600)); +#54600 = FILL_AREA_STYLE_COLOUR('',#50655); +#54601 = STYLED_ITEM('color',(#54602),#19172); +#54602 = PRESENTATION_STYLE_ASSIGNMENT((#54603)); +#54603 = SURFACE_STYLE_USAGE(.BOTH.,#54604); +#54604 = SURFACE_SIDE_STYLE('',(#54605)); +#54605 = SURFACE_STYLE_FILL_AREA(#54606); +#54606 = FILL_AREA_STYLE('',(#54607)); +#54607 = FILL_AREA_STYLE_COLOUR('',#50655); +#54608 = STYLED_ITEM('color',(#54609),#19179); +#54609 = PRESENTATION_STYLE_ASSIGNMENT((#54610)); +#54610 = SURFACE_STYLE_USAGE(.BOTH.,#54611); +#54611 = SURFACE_SIDE_STYLE('',(#54612)); +#54612 = SURFACE_STYLE_FILL_AREA(#54613); +#54613 = FILL_AREA_STYLE('',(#54614)); +#54614 = FILL_AREA_STYLE_COLOUR('',#50655); +#54615 = STYLED_ITEM('color',(#54616),#19206); +#54616 = PRESENTATION_STYLE_ASSIGNMENT((#54617)); +#54617 = SURFACE_STYLE_USAGE(.BOTH.,#54618); +#54618 = SURFACE_SIDE_STYLE('',(#54619)); +#54619 = SURFACE_STYLE_FILL_AREA(#54620); +#54620 = FILL_AREA_STYLE('',(#54621)); +#54621 = FILL_AREA_STYLE_COLOUR('',#50655); +#54622 = STYLED_ITEM('color',(#54623),#19233); +#54623 = PRESENTATION_STYLE_ASSIGNMENT((#54624)); +#54624 = SURFACE_STYLE_USAGE(.BOTH.,#54625); +#54625 = SURFACE_SIDE_STYLE('',(#54626)); +#54626 = SURFACE_STYLE_FILL_AREA(#54627); +#54627 = FILL_AREA_STYLE('',(#54628)); +#54628 = FILL_AREA_STYLE_COLOUR('',#50655); +#54629 = STYLED_ITEM('color',(#54630),#19260); +#54630 = PRESENTATION_STYLE_ASSIGNMENT((#54631)); +#54631 = SURFACE_STYLE_USAGE(.BOTH.,#54632); +#54632 = SURFACE_SIDE_STYLE('',(#54633)); +#54633 = SURFACE_STYLE_FILL_AREA(#54634); +#54634 = FILL_AREA_STYLE('',(#54635)); +#54635 = FILL_AREA_STYLE_COLOUR('',#50655); +#54636 = STYLED_ITEM('color',(#54637),#19287); +#54637 = PRESENTATION_STYLE_ASSIGNMENT((#54638)); +#54638 = SURFACE_STYLE_USAGE(.BOTH.,#54639); +#54639 = SURFACE_SIDE_STYLE('',(#54640)); +#54640 = SURFACE_STYLE_FILL_AREA(#54641); +#54641 = FILL_AREA_STYLE('',(#54642)); +#54642 = FILL_AREA_STYLE_COLOUR('',#50655); +#54643 = STYLED_ITEM('color',(#54644),#19314); +#54644 = PRESENTATION_STYLE_ASSIGNMENT((#54645)); +#54645 = SURFACE_STYLE_USAGE(.BOTH.,#54646); +#54646 = SURFACE_SIDE_STYLE('',(#54647)); +#54647 = SURFACE_STYLE_FILL_AREA(#54648); +#54648 = FILL_AREA_STYLE('',(#54649)); +#54649 = FILL_AREA_STYLE_COLOUR('',#50655); +#54650 = STYLED_ITEM('color',(#54651),#19341); +#54651 = PRESENTATION_STYLE_ASSIGNMENT((#54652)); +#54652 = SURFACE_STYLE_USAGE(.BOTH.,#54653); +#54653 = SURFACE_SIDE_STYLE('',(#54654)); +#54654 = SURFACE_STYLE_FILL_AREA(#54655); +#54655 = FILL_AREA_STYLE('',(#54656)); +#54656 = FILL_AREA_STYLE_COLOUR('',#50655); +#54657 = STYLED_ITEM('color',(#54658),#19368); +#54658 = PRESENTATION_STYLE_ASSIGNMENT((#54659)); +#54659 = SURFACE_STYLE_USAGE(.BOTH.,#54660); +#54660 = SURFACE_SIDE_STYLE('',(#54661)); +#54661 = SURFACE_STYLE_FILL_AREA(#54662); +#54662 = FILL_AREA_STYLE('',(#54663)); +#54663 = FILL_AREA_STYLE_COLOUR('',#50655); +#54664 = STYLED_ITEM('color',(#54665),#19375); +#54665 = PRESENTATION_STYLE_ASSIGNMENT((#54666)); +#54666 = SURFACE_STYLE_USAGE(.BOTH.,#54667); +#54667 = SURFACE_SIDE_STYLE('',(#54668)); +#54668 = SURFACE_STYLE_FILL_AREA(#54669); +#54669 = FILL_AREA_STYLE('',(#54670)); +#54670 = FILL_AREA_STYLE_COLOUR('',#50655); +#54671 = STYLED_ITEM('color',(#54672),#19402); +#54672 = PRESENTATION_STYLE_ASSIGNMENT((#54673)); +#54673 = SURFACE_STYLE_USAGE(.BOTH.,#54674); +#54674 = SURFACE_SIDE_STYLE('',(#54675)); +#54675 = SURFACE_STYLE_FILL_AREA(#54676); +#54676 = FILL_AREA_STYLE('',(#54677)); +#54677 = FILL_AREA_STYLE_COLOUR('',#50655); +#54678 = STYLED_ITEM('color',(#54679),#19429); +#54679 = PRESENTATION_STYLE_ASSIGNMENT((#54680)); +#54680 = SURFACE_STYLE_USAGE(.BOTH.,#54681); +#54681 = SURFACE_SIDE_STYLE('',(#54682)); +#54682 = SURFACE_STYLE_FILL_AREA(#54683); +#54683 = FILL_AREA_STYLE('',(#54684)); +#54684 = FILL_AREA_STYLE_COLOUR('',#50655); +#54685 = STYLED_ITEM('color',(#54686),#19456); +#54686 = PRESENTATION_STYLE_ASSIGNMENT((#54687)); +#54687 = SURFACE_STYLE_USAGE(.BOTH.,#54688); +#54688 = SURFACE_SIDE_STYLE('',(#54689)); +#54689 = SURFACE_STYLE_FILL_AREA(#54690); +#54690 = FILL_AREA_STYLE('',(#54691)); +#54691 = FILL_AREA_STYLE_COLOUR('',#50655); +#54692 = STYLED_ITEM('color',(#54693),#19483); +#54693 = PRESENTATION_STYLE_ASSIGNMENT((#54694)); +#54694 = SURFACE_STYLE_USAGE(.BOTH.,#54695); +#54695 = SURFACE_SIDE_STYLE('',(#54696)); +#54696 = SURFACE_STYLE_FILL_AREA(#54697); +#54697 = FILL_AREA_STYLE('',(#54698)); +#54698 = FILL_AREA_STYLE_COLOUR('',#50655); +#54699 = STYLED_ITEM('color',(#54700),#19510); +#54700 = PRESENTATION_STYLE_ASSIGNMENT((#54701)); +#54701 = SURFACE_STYLE_USAGE(.BOTH.,#54702); +#54702 = SURFACE_SIDE_STYLE('',(#54703)); +#54703 = SURFACE_STYLE_FILL_AREA(#54704); +#54704 = FILL_AREA_STYLE('',(#54705)); +#54705 = FILL_AREA_STYLE_COLOUR('',#50655); +#54706 = STYLED_ITEM('color',(#54707),#19537); +#54707 = PRESENTATION_STYLE_ASSIGNMENT((#54708)); +#54708 = SURFACE_STYLE_USAGE(.BOTH.,#54709); +#54709 = SURFACE_SIDE_STYLE('',(#54710)); +#54710 = SURFACE_STYLE_FILL_AREA(#54711); +#54711 = FILL_AREA_STYLE('',(#54712)); +#54712 = FILL_AREA_STYLE_COLOUR('',#50655); +#54713 = STYLED_ITEM('color',(#54714),#19564); +#54714 = PRESENTATION_STYLE_ASSIGNMENT((#54715)); +#54715 = SURFACE_STYLE_USAGE(.BOTH.,#54716); +#54716 = SURFACE_SIDE_STYLE('',(#54717)); +#54717 = SURFACE_STYLE_FILL_AREA(#54718); +#54718 = FILL_AREA_STYLE('',(#54719)); +#54719 = FILL_AREA_STYLE_COLOUR('',#50655); +ENDSEC; +END-ISO-10303-21; diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/StudioMic.xls b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/StudioMic.xls new file mode 100755 index 0000000..afb5947 Binary files /dev/null and b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/StudioMic.xls differ diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Voltage_multipliers_with_CMOS_gates.pdf b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Voltage_multipliers_with_CMOS_gates.pdf new file mode 100755 index 0000000..2f33067 Binary files /dev/null and b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/Voltage_multipliers_with_CMOS_gates.pdf differ diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/build.jpg b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/build.jpg new file mode 100755 index 0000000..4825f84 Binary files /dev/null and b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/build.jpg differ diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/capsule.png b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/capsule.png new file mode 100755 index 0000000..998837a Binary files /dev/null and b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/capsule.png differ diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/donor.png b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/donor.png new file mode 100755 index 0000000..91ce79f Binary files /dev/null and b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/donor.png differ diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/fp-info-cache b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/fp-info-cache new file mode 100755 index 0000000..b948fa1 --- /dev/null +++ b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/fp-info-cache @@ -0,0 +1,93150 @@ +22665966530904290 +0.1uF +K104M20X7RH53L2 +K104M20X7RH53L2-1 +Capacitor +0 +2 +2 +1nF +K102J20C0GH5TH5 +K102J20C0GH5TH5-1 +Capacitor +0 +2 +2 +4.7uF +CAPPRD150W50D400H600 +ECE-A1VKS4R7 +Capacitor Polarised +0 +2 +2 +10Ko +RESAD1020W45L320D175 +MFS1/4-1-ren1 +Resistor +0 +2 +2 +Audio_Module +Reverb_BTDR-1H +Digital Reverberation Unit, http://www.belton.co.kr/inc/downfile.php?seq=17&file=pdf (footprint from http://www.uk-electronic.de/PDF/BTDR-1.pdf) +audio belton reverb +0 +7 +7 +Audio_Module +Reverb_BTDR-1V +Digital Reverberation Unit, http://www.belton.co.kr/inc/downfile.php?seq=17&file=pdf (footprint from http://www.uk-electronic.de/PDF/BTDR-1.pdf) +audio belton reverb +0 +7 +7 +Battery +BatteryClip_Keystone_54_D16-19mm +Battery clip for batteries with a diameter between 16-19 mm: https://www.keyelco.com/product.cfm/product_id/826 +battery clip 18650 18350 17350 CR123A 2/3A +0 +3 +1 +Battery +BatteryHolder_Bulgin_BX0036_1xC +Bulgin Battery Holder, BX0036, Battery Type C (https://www.bulgin.com/products/pub/media/bulgin/data/Battery_holders.pdf) +Bulgin BX0036 +0 +2 +2 +Battery +BatteryHolder_ComfortableElectronic_CH273-2450_1x2450 +Comfortable Electronic CR2450 battery holder, http://www.comf.com.tw/ProductDetail.asp?no=148 +Comfortable Electronic CR2450 +0 +2 +2 +Battery +BatteryHolder_Eagle_12BH611-GR +https://eu.mouser.com/datasheet/2/209/EPD-200766-1274481.pdf +9V Battery Holder +0 +2 +2 +Battery +BatteryHolder_Keystone_103_1x20mm +http://www.keyelco.com/product-pdf.cfm?p=719 +Keystone type 103 battery holder +0 +2 +2 +Battery +BatteryHolder_Keystone_104_1x23mm +http://www.keyelco.com/product-pdf.cfm?p=744 +Keystone type 104 battery holder +0 +2 +2 +Battery +BatteryHolder_Keystone_105_1x2430 +http://www.keyelco.com/product-pdf.cfm?p=745 +Keystone type 105 battery holder +0 +2 +2 +Battery +BatteryHolder_Keystone_106_1x20mm +http://www.keyelco.com/product-pdf.cfm?p=720 +Keystone type 106 battery holder +0 +2 +2 +Battery +BatteryHolder_Keystone_107_1x23mm +http://www.keyelco.com/product-pdf.cfm?p=746 +Keystone type 107 battery holder +0 +2 +2 +Battery +BatteryHolder_Keystone_500 +Keystone #500, 12mm CR1220 battery holder, http://www.keyelco.com/product-pdf.cfm?p=710 +CR1220 battery holder +0 +2 +2 +Battery +BatteryHolder_Keystone_590 +AA CR2 A battery holder with leaf spring, Keystone, https://ken.keyeuro.eu/cat/590.pdf +AA battery holder Keystone +0 +3 +1 +Battery +BatteryHolder_Keystone_1042_1x18650 +Battery holder for 18650 cylindrical cells http://www.keyelco.com/product.cfm/product_id/918 +18650 Keystone 1042 Li-ion +0 +2 +2 +Battery +BatteryHolder_Keystone_1057_1x2032 +SMT (Auto-In/Ultra-Low) Holder for 2032 Cell, 33.2 x 23.9mm, 2mm height above PCB, https://www.keyelco.com/userAssets/file/M65p4.pdf +Keystone type 1057 coin cell holder +0 +2 +2 +Battery +BatteryHolder_Keystone_1058_1x2032 +http://www.keyelco.com/product-pdf.cfm?p=14028 +Keystone type 1058 coin cell retainer +0 +2 +2 +Battery +BatteryHolder_Keystone_1060_1x2032 +http://www.keyelco.com/product-pdf.cfm?p=726 +CR2032 BR2032 BatteryHolder Battery +0 +2 +2 +Battery +BatteryHolder_Keystone_2460_1xAA +https://www.keyelco.com/product-pdf.cfm?p=1025 +AA battery cell holder +0 +2 +2 +Battery +BatteryHolder_Keystone_2462_2xAA +2xAA cell battery holder, Keystone P/N 2462, https://www.keyelco.com/product-pdf.cfm?p=1027 +AA battery cell holder +0 +2 +2 +Battery +BatteryHolder_Keystone_2466_1xAAA +1xAAA Battery Holder, Keystone, Plastic Case, http://www.keyelco.com/product-pdf.cfm?p=1031 +AAA battery holder Keystone +0 +2 +2 +Battery +BatteryHolder_Keystone_2468_2xAAA +2xAAA cell battery holder, Keystone P/N 2468, http://www.keyelco.com/product-pdf.cfm?p=1033 +AAA battery cell holder +0 +2 +2 +Battery +BatteryHolder_Keystone_2479_3xAAA +Keystone Battery Holder, 2479, Battery Type 3xAAA (Script generated with StandardBox.py) (Keystone Battery Holder, 2479, Battery Type 3xAAA) +Keystone Battery Holder 2479 Battery Type 3xAAA +0 +2 +2 +Battery +BatteryHolder_Keystone_2993 +http://www.keyelco.com/product-pdf.cfm?p=776 +Keystone type 2993 negative battery contact +0 +1 +1 +Battery +BatteryHolder_Keystone_2998_1x6.8mm +www.keyelco.com/product-pdf.cfm?p=763 +Keystone type 2998 battery holder +0 +3 +2 +Battery +BatteryHolder_Keystone_3000_1x12mm +http://www.keyelco.com/product-pdf.cfm?p=777 +Keystone type 3000 coin cell retainer +0 +3 +2 +Battery +BatteryHolder_Keystone_3001_1x12mm +http://www.keyelco.com/product-pdf.cfm?p=778 +Keystone type 3001 coin cell retainer +0 +3 +2 +Battery +BatteryHolder_Keystone_3002_1x2032 +https://www.tme.eu/it/Document/a823211ec201a9e209042d155fe22d2b/KEYS2996.pdf +BR2016 CR2016 DL2016 BR2020 CL2020 BR2025 CR2025 DL2025 DR2032 CR2032 DL2032 +0 +3 +2 +Battery +BatteryHolder_Keystone_3008_1x2450 +http://www.keyelco.com/product-pdf.cfm?p=786 +Keystone type 3008 coin cell retainer +0 +3 +2 +Battery +BatteryHolder_Keystone_3009_1x2450 +http://www.keyelco.com/product-pdf.cfm?p=787 +Keystone type 3009 coin cell retainer +0 +3 +2 +Battery +BatteryHolder_Keystone_3034_1x20mm +Keystone 3034 SMD battery holder for 2020, 2025 and 2032 coincell batteries. http://www.keyelco.com/product-pdf.cfm?p=798 +Keystone type 3034 coin cell retainer +0 +3 +2 +Battery +BatteryHolder_LINX_BAT-HLD-012-SMT +SMT battery holder for CR1216/1220/1225, https://linxtechnologies.com/wp/wp-content/uploads/bat-hld-012-smt.pdf +battery holder coin cell cr1216 cr1220 cr1225 +0 +3 +2 +Battery +BatteryHolder_MPD_BA9VPC_1xPP3 +1xPP3 (9V) battery holder, Memory Protection Devices P/N BA9VPC, http://www.memoryprotectiondevices.com/datasheets/BA9VPC-datasheet.pdf +PP3 Battery Holder BA9VPC 9V +0 +2 +2 +Battery +BatteryHolder_MPD_BC2AAPC_2xAA +2xAA cell battery holder, Memory Protection Devices P/N BC2AAPC, http://www.memoryprotectiondevices.com/datasheets/BC2AAPC-datasheet.pdf +AA battery cell holder +0 +2 +2 +Battery +BatteryHolder_MPD_BC12AAPC_2xAA +2xAA cell battery holder, Memory Protection Devices P/N BC12AAPC, http://www.memoryprotectiondevices.com/datasheets/BC12AAPC-datasheet.pdf +AA battery cell holder +0 +2 +2 +Battery +BatteryHolder_MPD_BC2003_1x2032 +http://www.memoryprotectiondevices.com/datasheets/BC-2003-datasheet.pdf +BC2003 CR2032 2032 Battery Holder +0 +3 +2 +Battery +BatteryHolder_MPD_BH-18650-PC2 +18650 Battery Holder (http://www.memoryprotectiondevices.com/datasheets/BK-18650-PC2-datasheet.pdf) +18650 Battery Holder +0 +2 +2 +Battery +BatteryHolder_Multicomp_BC-2001_1x2032 +CR2032 retainer clip, SMT ( http://www.farnell.com/datasheets/1505853.pdf ) +BC-2001 CR2032 2032 Battery Holder +0 +3 +2 +Battery +BatteryHolder_Renata_SMTU2032-LF_1x2032 +https://www.renata.com/fr/downloads/?product=smtu2032-lf&fileid=6a9833a4d49dfb7b550194fe0f +Renata SMT battery holder coin cell 2032 +0 +2 +2 +Battery +BatteryHolder_Seiko_MS621F +Seiko MS621F, https://www.sii.co.jp/en/me/files/2014/02/file_EXTENDED_PRDCT_SPEC_75_FILE_11.jpg +Seiko MS621F +0 +2 +2 +Battery +BatteryHolder_TruPower_BH-331P_3xAA +Keystone Battery Holder BH-331P Battery Type 3xAA (Script generated with StandardBox.py) (Keystone Battery Holder BH-331P Battery Type 3xAA) +Battery Holder BH-331P Battery Type 3xAA +0 +2 +2 +Battery +Battery_CR1225 +CR1225 battery +battery CR1225 coin cell +0 +0 +0 +Battery +Battery_Panasonic_CR1025-VSK_Vertical_CircularHoles +Panasonic CR-1025/VSK battery +battery CR-1025 coin cell vertical +0 +2 +2 +Battery +Battery_Panasonic_CR1220-VCN_Vertical_CircularHoles +Panasonic CR-1220/VCN battery, https://industrial.panasonic.com/cdbs/www-data/pdf2/AAA4000/AAA4000D140.PDF +battery CR-1220 coin cell vertical +0 +2 +2 +Battery +Battery_Panasonic_CR1632-V1AN_Vertical_CircularHoles +Panasonic CR-1632-V1AN battery, https://industrial.panasonic.com/cdbs/www-data/pdf2/AAA4000/AAA4000D464.PDF +battery CR-1632 coin cell vertical +0 +2 +2 +Battery +Battery_Panasonic_CR2025-V1AK_Vertical_CircularHoles +Panasonic CR-2025/V1AK battery, +battery CR-2025 coin cell vertical +0 +2 +2 +Battery +Battery_Panasonic_CR2032-VS1N_Vertical_CircularHoles +Panasonic CR-2032/VS1N battery, https://industrial.panasonic.com/cdbs/www-data/pdf2/AAA4000/AAA4000D348.PDF +battery CR-2032 coin cell vertical +0 +2 +2 +Battery +Battery_Panasonic_CR2354-VCN_Vertical_CircularHoles +Panasonic CR-2354/VCN battery, https://industrial.panasonic.com/cdbs/www-data/pdf2/AAA4000/AAA4000D486.PDF +battery CR-2354/VCN coin cell vertical +0 +2 +2 +Battery +Battery_Panasonic_CR2450-VAN_Vertical_CircularHoles +Panasonic CR-2450/VAN battery, https://industrial.panasonic.com/cdbs/www-data/pdf2/AAA4000/AAA4000D492.PDF +battery CR-2450 coin cell +0 +2 +2 +Battery +Battery_Panasonic_CR2477-VCN_Vertical_CircularHoles +Panasonic CR-2477/VCN battery, https://industrial.panasonic.com/cdbs/www-data/pdf2/AAA4000/AAA4000D502.PDF +battery CR-2477 coin cell vertical +0 +2 +2 +Battery +Battery_Panasonic_CR3032-VCN_Vertical_CircularHoles +Panasonic CR-3032/VCN battery, https://industrial.panasonic.com/cdbs/www-data/pdf2/AAA4000/AAA4000D508.PDF +battery CR-3032 coin cell vertical +0 +2 +2 +Button_Switch_Keyboard +SW_Cherry_MX_1.00u_PCB +Cherry MX keyswitch, 1.00u, PCB mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf +Cherry MX keyswitch 1.00u PCB +0 +2 +2 +Button_Switch_Keyboard +SW_Cherry_MX_1.00u_Plate +Cherry MX keyswitch, 1.00u, plate mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf +Cherry MX keyswitch 1.00u plate +0 +2 +2 +Button_Switch_Keyboard +SW_Cherry_MX_1.25u_PCB +Cherry MX keyswitch, 1.25u, PCB mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf +Cherry MX keyswitch 1.25u PCB +0 +2 +2 +Button_Switch_Keyboard +SW_Cherry_MX_1.25u_Plate +Cherry MX keyswitch, 1.25u, plate mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf +Cherry MX keyswitch 1.25u plate +0 +2 +2 +Button_Switch_Keyboard +SW_Cherry_MX_1.50u_PCB +Cherry MX keyswitch, 1.50u, PCB mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf +Cherry MX keyswitch 1.50u PCB +0 +2 +2 +Button_Switch_Keyboard +SW_Cherry_MX_1.50u_Plate +Cherry MX keyswitch, 1.50u, plate mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf +Cherry MX keyswitch 1.50u plate +0 +2 +2 +Button_Switch_Keyboard +SW_Cherry_MX_1.75u_PCB +Cherry MX keyswitch, 1.75u, PCB mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf +Cherry MX keyswitch 1.75u PCB +0 +2 +2 +Button_Switch_Keyboard +SW_Cherry_MX_1.75u_Plate +Cherry MX keyswitch, 1.75u, plate mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf +Cherry MX keyswitch 1.75u plate +0 +2 +2 +Button_Switch_Keyboard +SW_Cherry_MX_2.00u_PCB +Cherry MX keyswitch, 2.00u, PCB mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf +Cherry MX keyswitch 2.00u PCB +0 +2 +2 +Button_Switch_Keyboard +SW_Cherry_MX_2.00u_Plate +Cherry MX keyswitch, 2.00u, plate mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf +Cherry MX keyswitch 2.00u plate +0 +2 +2 +Button_Switch_Keyboard +SW_Cherry_MX_2.00u_Vertical_PCB +Cherry MX keyswitch, 2.00u, vertical, PCB mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf +Cherry MX keyswitch 2.00u vertical PCB +0 +2 +2 +Button_Switch_Keyboard +SW_Cherry_MX_2.00u_Vertical_Plate +Cherry MX keyswitch, 2.00u, vertical, plate mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf +Cherry MX keyswitch 2.00u vertical plate +0 +2 +2 +Button_Switch_Keyboard +SW_Cherry_MX_2.25u_PCB +Cherry MX keyswitch, 2.25u, PCB mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf +Cherry MX keyswitch 2.25u PCB +0 +2 +2 +Button_Switch_Keyboard +SW_Cherry_MX_2.25u_Plate +Cherry MX keyswitch, 2.25u, plate mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf +Cherry MX keyswitch 2.25u plate +0 +2 +2 +Button_Switch_Keyboard +SW_Cherry_MX_2.75u_PCB +Cherry MX keyswitch, 2.75u, PCB mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf +Cherry MX keyswitch 2.75u PCB +0 +2 +2 +Button_Switch_Keyboard +SW_Cherry_MX_2.75u_Plate +Cherry MX keyswitch, 2.75u, plate mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf +Cherry MX keyswitch 2.75u plate +0 +2 +2 +Button_Switch_Keyboard +SW_Cherry_MX_6.25u_PCB +Cherry MX keyswitch, 6.25u, PCB mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf +Cherry MX keyswitch 6.25u PCB +0 +2 +2 +Button_Switch_Keyboard +SW_Cherry_MX_6.25u_Plate +Cherry MX keyswitch, 6.25u, plate mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf +Cherry MX keyswitch 6.25u plate +0 +2 +2 +Button_Switch_Keyboard +SW_Cherry_MX_ISOEnter_PCB +Cherry MX keyswitch, ISO Enter, PCB mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf +Cherry MX keyswitch ISO enter PCB +0 +2 +2 +Button_Switch_Keyboard +SW_Cherry_MX_ISOEnter_Plate +Cherry MX keyswitch, ISO Enter, plate mount, http://cherryamericas.com/wp-content/uploads/2014/12/mx_cat.pdf +Cherry MX keyswitch ISO enter plate +0 +2 +2 +Button_Switch_Keyboard +SW_Matias_1.00u +Matias/ALPS keyswitch, 1.00u, http://matias.ca/switches/ +Matias ALPS keyswitch 1.00u +0 +2 +2 +Button_Switch_Keyboard +SW_Matias_1.25u +Matias/ALPS keyswitch, 1.25u, http://matias.ca/switches/ +Matias ALPS keyswitch 1.25u +0 +2 +2 +Button_Switch_Keyboard +SW_Matias_1.50u +Matias/ALPS keyswitch, 1.50u, http://matias.ca/switches/ +Matias ALPS keyswitch 1.50u +0 +2 +2 +Button_Switch_Keyboard +SW_Matias_1.75u +Matias/ALPS keyswitch, 1.75u, http://matias.ca/switches/ +Matias ALPS keyswitch 1.75u +0 +2 +2 +Button_Switch_Keyboard +SW_Matias_2.00u +Matias/ALPS keyswitch, 2.00u, http://matias.ca/switches/ +Matias ALPS keyswitch 2.00u +0 +2 +2 +Button_Switch_Keyboard +SW_Matias_2.25u +Matias/ALPS keyswitch, 2.25u, http://matias.ca/switches/ +Matias ALPS keyswitch 2.25u +0 +2 +2 +Button_Switch_Keyboard +SW_Matias_2.75u +Matias/ALPS keyswitch, 2.75u, http://matias.ca/switches/ +Matias ALPS keyswitch 2.75u +0 +2 +2 +Button_Switch_Keyboard +SW_Matias_6.25u +Matias/ALPS keyswitch, 6.25u, http://matias.ca/switches/ +Matias ALPS keyswitch 6.25u +0 +2 +2 +Button_Switch_Keyboard +SW_Matias_ISOEnter +Matias/ALPS keyswitch, ISO Enter, http://matias.ca/switches/ +Matias ALPS keyswitch ISO enter +0 +2 +2 +Button_Switch_SMD +Nidec_Copal_CAS-120A +Slide Switch, SMD, Nidec CAS series, https://www.nidec-components.com/e/catalog/switch/cas.pdf +SMD slide switch Nidec CAS 120A +0 +3 +3 +Button_Switch_SMD +Nidec_Copal_SH-7010A +4-bit rotary coded switch, J-hook, https://www.nidec-copal-electronics.com/e/catalog/switch/sh-7000.pdf +rotary switch bcd +0 +6 +5 +Button_Switch_SMD +Nidec_Copal_SH-7010B +4-bit rotary coded switch, gull wing, https://www.nidec-copal-electronics.com/e/catalog/switch/sh-7000.pdf +rotary switch bcd +0 +6 +5 +Button_Switch_SMD +Nidec_Copal_SH-7040B +4-bit rotary coded switch, gull wing, Gray code, https://www.nidec-copal-electronics.com/e/catalog/switch/sh-7000.pdf +rotary switch bcd +0 +5 +5 +Button_Switch_SMD +Panasonic_EVQPUJ_EVQPUA +http://industrial.panasonic.com/cdbs/www-data/pdf/ATV0000/ATV0000CE5.pdf +SMD SMT SPST EVQPUJ EVQPUA +0 +4 +2 +Button_Switch_SMD +Panasonic_EVQPUK_EVQPUB +http://industrial.panasonic.com/cdbs/www-data/pdf/ATV0000/ATV0000CE5.pdf +SMD SMT SPST EVQPUK EVQPUB +0 +4 +2 +Button_Switch_SMD +Panasonic_EVQPUL_EVQPUC +http://industrial.panasonic.com/cdbs/www-data/pdf/ATV0000/ATV0000CE5.pdf +SMD SMT SPST EVQPUL EVQPUC +0 +4 +2 +Button_Switch_SMD +Panasonic_EVQPUM_EVQPUD +http://industrial.panasonic.com/cdbs/www-data/pdf/ATV0000/ATV0000CE5.pdf +SMD SMT SPST EVQPUM EVQPUD +0 +4 +2 +Button_Switch_SMD +SW_DIP_SPSTx01_Slide_6.7x4.1mm_W6.73mm_P2.54mm_LowProfile_JPin +SMD 1x-dip-switch SPST , Slide, row spacing 6.73 mm (264 mils), body size 6.7x4.1mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile, JPin +SMD DIP Switch SPST Slide 6.73mm 264mil SMD LowProfile JPin +0 +2 +2 +Button_Switch_SMD +SW_DIP_SPSTx01_Slide_6.7x4.1mm_W8.61mm_P2.54mm_LowProfile +SMD 1x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 6.7x4.1mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile +SMD DIP Switch SPST Slide 8.61mm 338mil SMD LowProfile +0 +2 +2 +Button_Switch_SMD +SW_DIP_SPSTx01_Slide_9.78x4.72mm_W8.61mm_P2.54mm +SMD 1x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 9.78x4.72mm (see e.g. https://www.ctscorp.com/wp-content/uploads/204.pdf), SMD +SMD DIP Switch SPST Slide 8.61mm 338mil SMD +0 +2 +2 +Button_Switch_SMD +SW_DIP_SPSTx01_Slide_Copal_CHS-01A_W5.08mm_P1.27mm_JPin +SMD 1x-dip-switch SPST Copal_CHS-01A, Slide, row spacing 5.08 mm (200 mils), body size (see http://www.nidec-copal-electronics.com/e/catalog/switch/chs.pdf), SMD, JPin +SMD DIP Switch SPST Slide 5.08mm 200mil SMD JPin +0 +2 +2 +Button_Switch_SMD +SW_DIP_SPSTx01_Slide_Copal_CHS-01B_W7.62mm_P1.27mm +SMD 1x-dip-switch SPST Copal_CHS-01B, Slide, row spacing 7.62 mm (300 mils), body size (see http://www.nidec-copal-electronics.com/e/catalog/switch/chs.pdf), SMD +SMD DIP Switch SPST Slide 7.62mm 300mil SMD +0 +2 +2 +Button_Switch_SMD +SW_DIP_SPSTx01_Slide_Copal_CVS-01xB_W5.9mm_P1mm +SMD 1x-dip-switch SPST Copal_CVS-01xB, Slide, row spacing 5.9 mm (232 mils), body size (see http://www.nidec-copal-electronics.com/e/catalog/switch/cvs.pdf) +SMD DIP Switch SPST Slide 5.9mm 232mil +0 +6 +3 +Button_Switch_SMD +SW_DIP_SPSTx01_Slide_Omron_A6S-110x_W8.9mm_P2.54mm +SMD 1x-dip-switch SPST Omron_A6S-110x, Slide, row spacing 8.9 mm (350 mils), body size (see http://omronfs.omron.com/en_US/ecb/products/pdf/en-a6s.pdf) +SMD DIP Switch SPST Slide 8.9mm 350mil +0 +2 +2 +Button_Switch_SMD +SW_DIP_SPSTx02_Slide_6.7x6.64mm_W6.73mm_P2.54mm_LowProfile_JPin +SMD 2x-dip-switch SPST , Slide, row spacing 6.73 mm (264 mils), body size 6.7x6.64mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile, JPin +SMD DIP Switch SPST Slide 6.73mm 264mil SMD LowProfile JPin +0 +4 +4 +Button_Switch_SMD +SW_DIP_SPSTx02_Slide_6.7x6.64mm_W8.61mm_P2.54mm_LowProfile +SMD 2x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 6.7x6.64mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile +SMD DIP Switch SPST Slide 8.61mm 338mil SMD LowProfile +0 +4 +4 +Button_Switch_SMD +SW_DIP_SPSTx02_Slide_9.78x7.26mm_W8.61mm_P2.54mm +SMD 2x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 9.78x7.26mm (see e.g. https://www.ctscorp.com/wp-content/uploads/204.pdf), SMD +SMD DIP Switch SPST Slide 8.61mm 338mil SMD +0 +4 +4 +Button_Switch_SMD +SW_DIP_SPSTx02_Slide_Copal_CHS-02A_W5.08mm_P1.27mm_JPin +SMD 2x-dip-switch SPST Copal_CHS-02A, Slide, row spacing 5.08 mm (200 mils), body size (see http://www.nidec-copal-electronics.com/e/catalog/switch/chs.pdf), SMD, JPin +SMD DIP Switch SPST Slide 5.08mm 200mil SMD JPin +0 +4 +4 +Button_Switch_SMD +SW_DIP_SPSTx02_Slide_Copal_CHS-02B_W7.62mm_P1.27mm +SMD 2x-dip-switch SPST Copal_CHS-02B, Slide, row spacing 7.62 mm (300 mils), body size (see http://www.nidec-copal-electronics.com/e/catalog/switch/chs.pdf), SMD +SMD DIP Switch SPST Slide 7.62mm 300mil SMD +0 +4 +4 +Button_Switch_SMD +SW_DIP_SPSTx02_Slide_Copal_CVS-02xB_W5.9mm_P1mm +SMD 2x-dip-switch SPST Copal_CVS-02xB, Slide, row spacing 5.9 mm (232 mils), body size (see http://www.nidec-copal-electronics.com/e/catalog/switch/cvs.pdf) +SMD DIP Switch SPST Slide 5.9mm 232mil +0 +8 +5 +Button_Switch_SMD +SW_DIP_SPSTx02_Slide_KingTek_DSHP02TJ_W5.25mm_P1.27mm_JPin +SMD 2x-dip-switch SPST KingTek_DSHP02TJ, Slide, row spacing 5.25 mm (206 mils), body size (see http://www.kingtek.net.cn/pic/201601201446313350.pdf), JPin +SMD DIP Switch SPST Slide 5.25mm 206mil JPin +0 +4 +4 +Button_Switch_SMD +SW_DIP_SPSTx02_Slide_KingTek_DSHP02TS_W7.62mm_P1.27mm +SMD 2x-dip-switch SPST KingTek_DSHP02TS, Slide, row spacing 7.62 mm (300 mils), body size (see http://www.kingtek.net.cn/pic/201601201417455112.pdf) +SMD DIP Switch SPST Slide 7.62mm 300mil +0 +4 +4 +Button_Switch_SMD +SW_DIP_SPSTx02_Slide_Omron_A6H-2101_W6.15mm_P1.27mm +SMD 2x-dip-switch SPST Omron_A6H-2101, Slide, row spacing 6.15 mm (242 mils), body size (see https://www.omron.com/ecb/products/pdf/en-a6h.pdf) +SMD DIP Switch SPST Slide 6.15mm 242mil +0 +4 +4 +Button_Switch_SMD +SW_DIP_SPSTx02_Slide_Omron_A6S-210x_W8.9mm_P2.54mm +SMD 2x-dip-switch SPST Omron_A6S-210x, Slide, row spacing 8.9 mm (350 mils), body size (see http://omronfs.omron.com/en_US/ecb/products/pdf/en-a6s.pdf) +SMD DIP Switch SPST Slide 8.9mm 350mil +0 +4 +4 +Button_Switch_SMD +SW_DIP_SPSTx03_Slide_6.7x9.18mm_W6.73mm_P2.54mm_LowProfile_JPin +SMD 3x-dip-switch SPST , Slide, row spacing 6.73 mm (264 mils), body size 6.7x9.18mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile, JPin +SMD DIP Switch SPST Slide 6.73mm 264mil SMD LowProfile JPin +0 +6 +6 +Button_Switch_SMD +SW_DIP_SPSTx03_Slide_6.7x9.18mm_W8.61mm_P2.54mm_LowProfile +SMD 3x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 6.7x9.18mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile +SMD DIP Switch SPST Slide 8.61mm 338mil SMD LowProfile +0 +6 +6 +Button_Switch_SMD +SW_DIP_SPSTx03_Slide_9.78x9.8mm_W8.61mm_P2.54mm +SMD 3x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 9.78x9.8mm (see e.g. https://www.ctscorp.com/wp-content/uploads/204.pdf), SMD +SMD DIP Switch SPST Slide 8.61mm 338mil SMD +0 +6 +6 +Button_Switch_SMD +SW_DIP_SPSTx03_Slide_Copal_CVS-03xB_W5.9mm_P1mm +SMD 3x-dip-switch SPST Copal_CVS-03xB, Slide, row spacing 5.9 mm (232 mils), body size (see http://www.nidec-copal-electronics.com/e/catalog/switch/cvs.pdf) +SMD DIP Switch SPST Slide 5.9mm 232mil +0 +10 +7 +Button_Switch_SMD +SW_DIP_SPSTx03_Slide_KingTek_DSHP03TJ_W5.25mm_P1.27mm_JPin +SMD 3x-dip-switch SPST KingTek_DSHP03TJ, Slide, row spacing 5.25 mm (206 mils), body size (see http://www.kingtek.net.cn/pic/201601201446313350.pdf), JPin +SMD DIP Switch SPST Slide 5.25mm 206mil JPin +0 +6 +6 +Button_Switch_SMD +SW_DIP_SPSTx03_Slide_KingTek_DSHP03TS_W7.62mm_P1.27mm +SMD 3x-dip-switch SPST KingTek_DSHP03TS, Slide, row spacing 7.62 mm (300 mils), body size (see http://www.kingtek.net.cn/pic/201601201417455112.pdf) +SMD DIP Switch SPST Slide 7.62mm 300mil +0 +6 +6 +Button_Switch_SMD +SW_DIP_SPSTx03_Slide_Omron_A6S-310x_W8.9mm_P2.54mm +SMD 3x-dip-switch SPST Omron_A6S-310x, Slide, row spacing 8.9 mm (350 mils), body size (see http://omronfs.omron.com/en_US/ecb/products/pdf/en-a6s.pdf) +SMD DIP Switch SPST Slide 8.9mm 350mil +0 +6 +6 +Button_Switch_SMD +SW_DIP_SPSTx04_Slide_6.7x11.72mm_W6.73mm_P2.54mm_LowProfile_JPin +SMD 4x-dip-switch SPST , Slide, row spacing 6.73 mm (264 mils), body size 6.7x11.72mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile, JPin +SMD DIP Switch SPST Slide 6.73mm 264mil SMD LowProfile JPin +0 +8 +8 +Button_Switch_SMD +SW_DIP_SPSTx04_Slide_6.7x11.72mm_W8.61mm_P2.54mm_LowProfile +SMD 4x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 6.7x11.72mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile +SMD DIP Switch SPST Slide 8.61mm 338mil SMD LowProfile +0 +8 +8 +Button_Switch_SMD +SW_DIP_SPSTx04_Slide_9.78x12.34mm_W8.61mm_P2.54mm +SMD 4x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 9.78x12.34mm (see e.g. https://www.ctscorp.com/wp-content/uploads/204.pdf), SMD +SMD DIP Switch SPST Slide 8.61mm 338mil SMD +0 +8 +8 +Button_Switch_SMD +SW_DIP_SPSTx04_Slide_Copal_CHS-04A_W5.08mm_P1.27mm_JPin +SMD 4x-dip-switch SPST Copal_CHS-04A, Slide, row spacing 5.08 mm (200 mils), body size (see http://www.nidec-copal-electronics.com/e/catalog/switch/chs.pdf), SMD, JPin +SMD DIP Switch SPST Slide 5.08mm 200mil SMD JPin +0 +8 +8 +Button_Switch_SMD +SW_DIP_SPSTx04_Slide_Copal_CHS-04B_W7.62mm_P1.27mm +SMD 4x-dip-switch SPST Copal_CHS-04B, Slide, row spacing 7.62 mm (300 mils), body size (see http://www.nidec-copal-electronics.com/e/catalog/switch/chs.pdf), SMD +SMD DIP Switch SPST Slide 7.62mm 300mil SMD +0 +8 +8 +Button_Switch_SMD +SW_DIP_SPSTx04_Slide_Copal_CVS-04xB_W5.9mm_P1mm +SMD 4x-dip-switch SPST Copal_CVS-04xB, Slide, row spacing 5.9 mm (232 mils), body size (see http://www.nidec-copal-electronics.com/e/catalog/switch/cvs.pdf) +SMD DIP Switch SPST Slide 5.9mm 232mil +0 +12 +9 +Button_Switch_SMD +SW_DIP_SPSTx04_Slide_KingTek_DSHP04TJ_W5.25mm_P1.27mm_JPin +SMD 4x-dip-switch SPST KingTek_DSHP04TJ, Slide, row spacing 5.25 mm (206 mils), body size (see http://www.kingtek.net.cn/pic/201601201446313350.pdf), JPin +SMD DIP Switch SPST Slide 5.25mm 206mil JPin +0 +8 +8 +Button_Switch_SMD +SW_DIP_SPSTx04_Slide_KingTek_DSHP04TS_W7.62mm_P1.27mm +SMD 4x-dip-switch SPST KingTek_DSHP04TS, Slide, row spacing 7.62 mm (300 mils), body size (see http://www.kingtek.net.cn/pic/201601201417455112.pdf) +SMD DIP Switch SPST Slide 7.62mm 300mil +0 +8 +8 +Button_Switch_SMD +SW_DIP_SPSTx04_Slide_Omron_A6H-4101_W6.15mm_P1.27mm +SMD 4x-dip-switch SPST Omron_A6H-4101, Slide, row spacing 6.15 mm (242 mils), body size (see https://www.omron.com/ecb/products/pdf/en-a6h.pdf) +SMD DIP Switch SPST Slide 6.15mm 242mil +0 +8 +8 +Button_Switch_SMD +SW_DIP_SPSTx04_Slide_Omron_A6S-410x_W8.9mm_P2.54mm +SMD 4x-dip-switch SPST Omron_A6S-410x, Slide, row spacing 8.9 mm (350 mils), body size (see http://omronfs.omron.com/en_US/ecb/products/pdf/en-a6s.pdf) +SMD DIP Switch SPST Slide 8.9mm 350mil +0 +8 +8 +Button_Switch_SMD +SW_DIP_SPSTx05_Slide_6.7x14.26mm_W6.73mm_P2.54mm_LowProfile_JPin +SMD 5x-dip-switch SPST , Slide, row spacing 6.73 mm (264 mils), body size 6.7x14.26mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile, JPin +SMD DIP Switch SPST Slide 6.73mm 264mil SMD LowProfile JPin +0 +10 +10 +Button_Switch_SMD +SW_DIP_SPSTx05_Slide_6.7x14.26mm_W8.61mm_P2.54mm_LowProfile +SMD 5x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 6.7x14.26mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile +SMD DIP Switch SPST Slide 8.61mm 338mil SMD LowProfile +0 +10 +10 +Button_Switch_SMD +SW_DIP_SPSTx05_Slide_9.78x14.88mm_W8.61mm_P2.54mm +SMD 5x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 9.78x14.88mm (see e.g. https://www.ctscorp.com/wp-content/uploads/204.pdf), SMD +SMD DIP Switch SPST Slide 8.61mm 338mil SMD +0 +10 +10 +Button_Switch_SMD +SW_DIP_SPSTx05_Slide_KingTek_DSHP05TJ_W5.25mm_P1.27mm_JPin +SMD 5x-dip-switch SPST KingTek_DSHP05TJ, Slide, row spacing 5.25 mm (206 mils), body size (see http://www.kingtek.net.cn/pic/201601201446313350.pdf), JPin +SMD DIP Switch SPST Slide 5.25mm 206mil JPin +0 +10 +10 +Button_Switch_SMD +SW_DIP_SPSTx05_Slide_KingTek_DSHP05TS_W7.62mm_P1.27mm +SMD 5x-dip-switch SPST KingTek_DSHP05TS, Slide, row spacing 7.62 mm (300 mils), body size (see http://www.kingtek.net.cn/pic/201601201417455112.pdf) +SMD DIP Switch SPST Slide 7.62mm 300mil +0 +10 +10 +Button_Switch_SMD +SW_DIP_SPSTx05_Slide_Omron_A6S-510x_W8.9mm_P2.54mm +SMD 5x-dip-switch SPST Omron_A6S-510x, Slide, row spacing 8.9 mm (350 mils), body size (see http://omronfs.omron.com/en_US/ecb/products/pdf/en-a6s.pdf) +SMD DIP Switch SPST Slide 8.9mm 350mil +0 +10 +10 +Button_Switch_SMD +SW_DIP_SPSTx06_Slide_6.7x16.8mm_W6.73mm_P2.54mm_LowProfile_JPin +SMD 6x-dip-switch SPST , Slide, row spacing 6.73 mm (264 mils), body size 6.7x16.8mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile, JPin +SMD DIP Switch SPST Slide 6.73mm 264mil SMD LowProfile JPin +0 +12 +12 +Button_Switch_SMD +SW_DIP_SPSTx06_Slide_6.7x16.8mm_W8.61mm_P2.54mm_LowProfile +SMD 6x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 6.7x16.8mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile +SMD DIP Switch SPST Slide 8.61mm 338mil SMD LowProfile +0 +12 +12 +Button_Switch_SMD +SW_DIP_SPSTx06_Slide_9.78x17.42mm_W8.61mm_P2.54mm +SMD 6x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 9.78x17.42mm (see e.g. https://www.ctscorp.com/wp-content/uploads/204.pdf), SMD +SMD DIP Switch SPST Slide 8.61mm 338mil SMD +0 +12 +12 +Button_Switch_SMD +SW_DIP_SPSTx06_Slide_Copal_CHS-06A_W5.08mm_P1.27mm_JPin +SMD 6x-dip-switch SPST Copal_CHS-06A, Slide, row spacing 5.08 mm (200 mils), body size (see http://www.nidec-copal-electronics.com/e/catalog/switch/chs.pdf), SMD, JPin +SMD DIP Switch SPST Slide 5.08mm 200mil SMD JPin +0 +12 +12 +Button_Switch_SMD +SW_DIP_SPSTx06_Slide_Copal_CHS-06B_W7.62mm_P1.27mm +SMD 6x-dip-switch SPST Copal_CHS-06B, Slide, row spacing 7.62 mm (300 mils), body size (see http://www.nidec-copal-electronics.com/e/catalog/switch/chs.pdf), SMD +SMD DIP Switch SPST Slide 7.62mm 300mil SMD +0 +12 +12 +Button_Switch_SMD +SW_DIP_SPSTx06_Slide_KingTek_DSHP06TJ_W5.25mm_P1.27mm_JPin +SMD 6x-dip-switch SPST KingTek_DSHP06TJ, Slide, row spacing 5.25 mm (206 mils), body size (see http://www.kingtek.net.cn/pic/201601201446313350.pdf), JPin +SMD DIP Switch SPST Slide 5.25mm 206mil JPin +0 +12 +12 +Button_Switch_SMD +SW_DIP_SPSTx06_Slide_KingTek_DSHP06TS_W7.62mm_P1.27mm +SMD 6x-dip-switch SPST KingTek_DSHP06TS, Slide, row spacing 7.62 mm (300 mils), body size (see http://www.kingtek.net.cn/pic/201601201417455112.pdf) +SMD DIP Switch SPST Slide 7.62mm 300mil +0 +12 +12 +Button_Switch_SMD +SW_DIP_SPSTx06_Slide_Omron_A6H-6101_W6.15mm_P1.27mm +SMD 6x-dip-switch SPST Omron_A6H-6101, Slide, row spacing 6.15 mm (242 mils), body size (see https://www.omron.com/ecb/products/pdf/en-a6h.pdf) +SMD DIP Switch SPST Slide 6.15mm 242mil +0 +12 +12 +Button_Switch_SMD +SW_DIP_SPSTx06_Slide_Omron_A6S-610x_W8.9mm_P2.54mm +SMD 6x-dip-switch SPST Omron_A6S-610x, Slide, row spacing 8.9 mm (350 mils), body size (see http://omronfs.omron.com/en_US/ecb/products/pdf/en-a6s.pdf) +SMD DIP Switch SPST Slide 8.9mm 350mil +0 +12 +12 +Button_Switch_SMD +SW_DIP_SPSTx07_Slide_6.7x19.34mm_W6.73mm_P2.54mm_LowProfile_JPin +SMD 7x-dip-switch SPST , Slide, row spacing 6.73 mm (264 mils), body size 6.7x19.34mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile, JPin +SMD DIP Switch SPST Slide 6.73mm 264mil SMD LowProfile JPin +0 +14 +14 +Button_Switch_SMD +SW_DIP_SPSTx07_Slide_6.7x19.34mm_W8.61mm_P2.54mm_LowProfile +SMD 7x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 6.7x19.34mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile +SMD DIP Switch SPST Slide 8.61mm 338mil SMD LowProfile +0 +14 +14 +Button_Switch_SMD +SW_DIP_SPSTx07_Slide_9.78x19.96mm_W8.61mm_P2.54mm +SMD 7x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 9.78x19.96mm (see e.g. https://www.ctscorp.com/wp-content/uploads/204.pdf), SMD +SMD DIP Switch SPST Slide 8.61mm 338mil SMD +0 +14 +14 +Button_Switch_SMD +SW_DIP_SPSTx07_Slide_KingTek_DSHP07TJ_W5.25mm_P1.27mm_JPin +SMD 7x-dip-switch SPST KingTek_DSHP07TJ, Slide, row spacing 5.25 mm (206 mils), body size (see http://www.kingtek.net.cn/pic/201601201446313350.pdf), JPin +SMD DIP Switch SPST Slide 5.25mm 206mil JPin +0 +14 +14 +Button_Switch_SMD +SW_DIP_SPSTx07_Slide_KingTek_DSHP07TS_W7.62mm_P1.27mm +SMD 7x-dip-switch SPST KingTek_DSHP07TS, Slide, row spacing 7.62 mm (300 mils), body size (see http://www.kingtek.net.cn/pic/201601201417455112.pdf) +SMD DIP Switch SPST Slide 7.62mm 300mil +0 +14 +14 +Button_Switch_SMD +SW_DIP_SPSTx07_Slide_Omron_A6S-710x_W8.9mm_P2.54mm +SMD 7x-dip-switch SPST Omron_A6S-710x, Slide, row spacing 8.9 mm (350 mils), body size (see http://omronfs.omron.com/en_US/ecb/products/pdf/en-a6s.pdf) +SMD DIP Switch SPST Slide 8.9mm 350mil +0 +14 +14 +Button_Switch_SMD +SW_DIP_SPSTx08_Slide_6.7x21.88mm_W6.73mm_P2.54mm_LowProfile_JPin +SMD 8x-dip-switch SPST , Slide, row spacing 6.73 mm (264 mils), body size 6.7x21.88mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile, JPin +SMD DIP Switch SPST Slide 6.73mm 264mil SMD LowProfile JPin +0 +16 +16 +Button_Switch_SMD +SW_DIP_SPSTx08_Slide_6.7x21.88mm_W8.61mm_P2.54mm_LowProfile +SMD 8x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 6.7x21.88mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile +SMD DIP Switch SPST Slide 8.61mm 338mil SMD LowProfile +0 +16 +16 +Button_Switch_SMD +SW_DIP_SPSTx08_Slide_9.78x22.5mm_W8.61mm_P2.54mm +SMD 8x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 9.78x22.5mm (see e.g. https://www.ctscorp.com/wp-content/uploads/204.pdf), SMD +SMD DIP Switch SPST Slide 8.61mm 338mil SMD +0 +16 +16 +Button_Switch_SMD +SW_DIP_SPSTx08_Slide_Copal_CHS-08A_W5.08mm_P1.27mm_JPin +SMD 8x-dip-switch SPST Copal_CHS-08A, Slide, row spacing 5.08 mm (200 mils), body size (see http://www.nidec-copal-electronics.com/e/catalog/switch/chs.pdf), SMD, JPin +SMD DIP Switch SPST Slide 5.08mm 200mil SMD JPin +0 +16 +16 +Button_Switch_SMD +SW_DIP_SPSTx08_Slide_Copal_CHS-08B_W7.62mm_P1.27mm +SMD 8x-dip-switch SPST Copal_CHS-08B, Slide, row spacing 7.62 mm (300 mils), body size (see http://www.nidec-copal-electronics.com/e/catalog/switch/chs.pdf), SMD +SMD DIP Switch SPST Slide 7.62mm 300mil SMD +0 +16 +16 +Button_Switch_SMD +SW_DIP_SPSTx08_Slide_Copal_CVS-08xB_W5.9mm_P1mm +SMD 8x-dip-switch SPST Copal_CVS-08xB, Slide, row spacing 5.9 mm (232 mils), body size (see http://www.nidec-copal-electronics.com/e/catalog/switch/cvs.pdf) +SMD DIP Switch SPST Slide 5.9mm 232mil +0 +20 +17 +Button_Switch_SMD +SW_DIP_SPSTx08_Slide_KingTek_DSHP08TJ_W5.25mm_P1.27mm_JPin +SMD 8x-dip-switch SPST KingTek_DSHP08TJ, Slide, row spacing 5.25 mm (206 mils), body size (see http://www.kingtek.net.cn/pic/201601201446313350.pdf), JPin +SMD DIP Switch SPST Slide 5.25mm 206mil JPin +0 +16 +16 +Button_Switch_SMD +SW_DIP_SPSTx08_Slide_KingTek_DSHP08TS_W7.62mm_P1.27mm +SMD 8x-dip-switch SPST KingTek_DSHP08TS, Slide, row spacing 7.62 mm (300 mils), body size (see http://www.kingtek.net.cn/pic/201601201417455112.pdf) +SMD DIP Switch SPST Slide 7.62mm 300mil +0 +16 +16 +Button_Switch_SMD +SW_DIP_SPSTx08_Slide_Omron_A6H-8101_W6.15mm_P1.27mm +SMD 8x-dip-switch SPST Omron_A6H-8101, Slide, row spacing 6.15 mm (242 mils), body size (see https://www.omron.com/ecb/products/pdf/en-a6h.pdf) +SMD DIP Switch SPST Slide 6.15mm 242mil +0 +16 +16 +Button_Switch_SMD +SW_DIP_SPSTx08_Slide_Omron_A6S-810x_W8.9mm_P2.54mm +SMD 8x-dip-switch SPST Omron_A6S-810x, Slide, row spacing 8.9 mm (350 mils), body size (see http://omronfs.omron.com/en_US/ecb/products/pdf/en-a6s.pdf) +SMD DIP Switch SPST Slide 8.9mm 350mil +0 +16 +16 +Button_Switch_SMD +SW_DIP_SPSTx09_Slide_6.7x24.42mm_W6.73mm_P2.54mm_LowProfile_JPin +SMD 9x-dip-switch SPST , Slide, row spacing 6.73 mm (264 mils), body size 6.7x24.42mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile, JPin +SMD DIP Switch SPST Slide 6.73mm 264mil SMD LowProfile JPin +0 +18 +18 +Button_Switch_SMD +SW_DIP_SPSTx09_Slide_6.7x24.42mm_W8.61mm_P2.54mm_LowProfile +SMD 9x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 6.7x24.42mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile +SMD DIP Switch SPST Slide 8.61mm 338mil SMD LowProfile +0 +18 +18 +Button_Switch_SMD +SW_DIP_SPSTx09_Slide_9.78x25.04mm_W8.61mm_P2.54mm +SMD 9x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 9.78x25.04mm (see e.g. https://www.ctscorp.com/wp-content/uploads/204.pdf), SMD +SMD DIP Switch SPST Slide 8.61mm 338mil SMD +0 +18 +18 +Button_Switch_SMD +SW_DIP_SPSTx09_Slide_KingTek_DSHP09TJ_W5.25mm_P1.27mm_JPin +SMD 9x-dip-switch SPST KingTek_DSHP09TJ, Slide, row spacing 5.25 mm (206 mils), body size (see http://www.kingtek.net.cn/pic/201601201446313350.pdf), JPin +SMD DIP Switch SPST Slide 5.25mm 206mil JPin +0 +18 +18 +Button_Switch_SMD +SW_DIP_SPSTx09_Slide_KingTek_DSHP09TS_W7.62mm_P1.27mm +SMD 9x-dip-switch SPST KingTek_DSHP09TS, Slide, row spacing 7.62 mm (300 mils), body size (see http://www.kingtek.net.cn/pic/201601201417455112.pdf) +SMD DIP Switch SPST Slide 7.62mm 300mil +0 +18 +18 +Button_Switch_SMD +SW_DIP_SPSTx09_Slide_Omron_A6S-910x_W8.9mm_P2.54mm +SMD 9x-dip-switch SPST Omron_A6S-910x, Slide, row spacing 8.9 mm (350 mils), body size (see http://omronfs.omron.com/en_US/ecb/products/pdf/en-a6s.pdf) +SMD DIP Switch SPST Slide 8.9mm 350mil +0 +18 +18 +Button_Switch_SMD +SW_DIP_SPSTx10_Slide_6.7x26.96mm_W6.73mm_P2.54mm_LowProfile_JPin +SMD 10x-dip-switch SPST , Slide, row spacing 6.73 mm (264 mils), body size 6.7x26.96mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile, JPin +SMD DIP Switch SPST Slide 6.73mm 264mil SMD LowProfile JPin +0 +20 +20 +Button_Switch_SMD +SW_DIP_SPSTx10_Slide_6.7x26.96mm_W8.61mm_P2.54mm_LowProfile +SMD 10x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 6.7x26.96mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile +SMD DIP Switch SPST Slide 8.61mm 338mil SMD LowProfile +0 +20 +20 +Button_Switch_SMD +SW_DIP_SPSTx10_Slide_9.78x27.58mm_W8.61mm_P2.54mm +SMD 10x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 9.78x27.58mm (see e.g. https://www.ctscorp.com/wp-content/uploads/204.pdf), SMD +SMD DIP Switch SPST Slide 8.61mm 338mil SMD +0 +20 +20 +Button_Switch_SMD +SW_DIP_SPSTx10_Slide_Copal_CHS-10A_W5.08mm_P1.27mm_JPin +SMD 10x-dip-switch SPST Copal_CHS-10A, Slide, row spacing 5.08 mm (200 mils), body size (see http://www.nidec-copal-electronics.com/e/catalog/switch/chs.pdf), SMD, JPin +SMD DIP Switch SPST Slide 5.08mm 200mil SMD JPin +0 +20 +20 +Button_Switch_SMD +SW_DIP_SPSTx10_Slide_Copal_CHS-10B_W7.62mm_P1.27mm +SMD 10x-dip-switch SPST Copal_CHS-10B, Slide, row spacing 7.62 mm (300 mils), body size (see http://www.nidec-copal-electronics.com/e/catalog/switch/chs.pdf), SMD +SMD DIP Switch SPST Slide 7.62mm 300mil SMD +0 +20 +20 +Button_Switch_SMD +SW_DIP_SPSTx10_Slide_KingTek_DSHP10TJ_W5.25mm_P1.27mm_JPin +SMD 10x-dip-switch SPST KingTek_DSHP10TJ, Slide, row spacing 5.25 mm (206 mils), body size (see http://www.kingtek.net.cn/pic/201601201446313350.pdf), JPin +SMD DIP Switch SPST Slide 5.25mm 206mil JPin +0 +20 +20 +Button_Switch_SMD +SW_DIP_SPSTx10_Slide_KingTek_DSHP10TS_W7.62mm_P1.27mm +SMD 10x-dip-switch SPST KingTek_DSHP10TS, Slide, row spacing 7.62 mm (300 mils), body size (see http://www.kingtek.net.cn/pic/201601201417455112.pdf) +SMD DIP Switch SPST Slide 7.62mm 300mil +0 +20 +20 +Button_Switch_SMD +SW_DIP_SPSTx10_Slide_Omron_A6H-10101_W6.15mm_P1.27mm +SMD 10x-dip-switch SPST Omron_A6H-10101, Slide, row spacing 6.15 mm (242 mils), body size (see https://www.omron.com/ecb/products/pdf/en-a6h.pdf) +SMD DIP Switch SPST Slide 6.15mm 242mil +0 +20 +20 +Button_Switch_SMD +SW_DIP_SPSTx10_Slide_Omron_A6S-1010x_W8.9mm_P2.54mm +SMD 10x-dip-switch SPST Omron_A6S-1010x, Slide, row spacing 8.9 mm (350 mils), body size (see http://omronfs.omron.com/en_US/ecb/products/pdf/en-a6s.pdf) +SMD DIP Switch SPST Slide 8.9mm 350mil +0 +20 +20 +Button_Switch_SMD +SW_DIP_SPSTx11_Slide_6.7x29.5mm_W6.73mm_P2.54mm_LowProfile_JPin +SMD 11x-dip-switch SPST , Slide, row spacing 6.73 mm (264 mils), body size 6.7x29.5mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile, JPin +SMD DIP Switch SPST Slide 6.73mm 264mil SMD LowProfile JPin +0 +22 +22 +Button_Switch_SMD +SW_DIP_SPSTx11_Slide_6.7x29.5mm_W8.61mm_P2.54mm_LowProfile +SMD 11x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 6.7x29.5mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile +SMD DIP Switch SPST Slide 8.61mm 338mil SMD LowProfile +0 +22 +22 +Button_Switch_SMD +SW_DIP_SPSTx11_Slide_9.78x30.12mm_W8.61mm_P2.54mm +SMD 11x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 9.78x30.12mm (see e.g. https://www.ctscorp.com/wp-content/uploads/204.pdf), SMD +SMD DIP Switch SPST Slide 8.61mm 338mil SMD +0 +22 +22 +Button_Switch_SMD +SW_DIP_SPSTx12_Slide_6.7x32.04mm_W6.73mm_P2.54mm_LowProfile_JPin +SMD 12x-dip-switch SPST , Slide, row spacing 6.73 mm (264 mils), body size 6.7x32.04mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile, JPin +SMD DIP Switch SPST Slide 6.73mm 264mil SMD LowProfile JPin +0 +24 +24 +Button_Switch_SMD +SW_DIP_SPSTx12_Slide_6.7x32.04mm_W8.61mm_P2.54mm_LowProfile +SMD 12x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 6.7x32.04mm (see e.g. https://www.ctscorp.com/wp-content/uploads/219.pdf), SMD, LowProfile +SMD DIP Switch SPST Slide 8.61mm 338mil SMD LowProfile +0 +24 +24 +Button_Switch_SMD +SW_DIP_SPSTx12_Slide_9.78x32.66mm_W8.61mm_P2.54mm +SMD 12x-dip-switch SPST , Slide, row spacing 8.61 mm (338 mils), body size 9.78x32.66mm (see e.g. https://www.ctscorp.com/wp-content/uploads/204.pdf), SMD +SMD DIP Switch SPST Slide 8.61mm 338mil SMD +0 +24 +24 +Button_Switch_SMD +SW_DPDT_CK_JS202011JCQN +Sub-miniature slide switch, vertical, SMT J bend https://dznh3ojzb2azq.cloudfront.net/products/Slide/JS/documents/datasheet.pdf +switch DPDT SMT +0 +6 +6 +Button_Switch_SMD +SW_MEC_5GSH9 +MEC 5G single pole normally-open tactile switch +switch normally-open pushbutton push-button +0 +4 +4 +Button_Switch_SMD +SW_Push_1P1T-MP_NO_Horizontal_Alps_SKRTLAE010 +Side push button (https://www.alps.com/prod/info/E/PDF/Tact/SurfaceMount/SKRT/SKRT.pdf) +push horizontal SPST 1P1T +0 +5 +3 +Button_Switch_SMD +SW_Push_1P1T-SH_NO_CK_KMR2xxG +CK components KMR2 tactile switch with ground pin http://www.ckswitches.com/media/1479/kmr2.pdf +tactile switch kmr2 +0 +5 +3 +Button_Switch_SMD +SW_Push_1P1T_NO_6x6mm_H9.5mm +tactile push button, 6x6mm e.g. PTS645xx series, height=9.5mm +tact sw push 6mm smd +0 +4 +2 +Button_Switch_SMD +SW_Push_1P1T_NO_CK_KMR2 +CK components KMR2 tactile switch http://www.ckswitches.com/media/1479/kmr2.pdf +tactile switch kmr2 +0 +4 +2 +Button_Switch_SMD +SW_Push_1P1T_NO_CK_KSC6xxJ +CK components KSC6 tactile switch https://www.ckswitches.com/media/1972/ksc6.pdf +tactile switch ksc6 +0 +4 +2 +Button_Switch_SMD +SW_Push_1P1T_NO_CK_KSC7xxJ +CK components KSC7 tactile switch https://www.ckswitches.com/media/1973/ksc7.pdf +tactile switch ksc7 +0 +4 +2 +Button_Switch_SMD +SW_Push_1P1T_NO_CK_PTS125Sx43PSMTR +C&K Switches 1P1T SMD PTS125 Series 12mm Tact Switch with Pegs, https://www.ckswitches.com/media/1462/pts125.pdf +Button Tactile Switch SPST 1P1T +0 +4 +2 +Button_Switch_SMD +SW_Push_1P1T_NO_Vertical_Wuerth_434133025816 +https://katalog.we-online.com/em/datasheet/434133025816.pdf +tactile switch Wurth Wuerth +0 +4 +2 +Button_Switch_SMD +SW_Push_1P1T_XKB_TS-1187A +SMD Tactile Switch, http://www.helloxkb.com/public/images/pdf/TS-1187A-X-X-X.pdf +SPST Tactile Switch +0 +4 +2 +Button_Switch_SMD +SW_Push_SPST_NO_Alps_SKRK +http://www.alps.com/prod/info/E/HTML/Tact/SurfaceMount/SKRK/SKRKAHE020.html +SMD SMT button +0 +2 +2 +Button_Switch_SMD +SW_SP3T_PCM13 +Ultraminiature Surface Mount Slide Switch, right-angle, https://www.ckswitches.com/media/1424/pcm.pdf + +0 +8 +4 +Button_Switch_SMD +SW_SPDT_CK-JS102011SAQN +Sub-miniature slide switch, right-angle, http://www.ckswitches.com/media/1422/js.pdf +switch spdt +0 +3 +3 +Button_Switch_SMD +SW_SPDT_PCM12 +Ultraminiature Surface Mount Slide Switch, right-angle, https://www.ckswitches.com/media/1424/pcm.pdf + +0 +7 +3 +Button_Switch_SMD +SW_SPDT_REED_MSDM-DT +Littlefuse 14.73x2.54mm, 175VDC 5W, SPDT Reed Switch MSDM-DT, https://www.littelfuse.com/~/media/electronics/datasheets/reed_switches/littelfuse_reed_switches_mdsm_dt_datasheet.pdf.pdf +Littlefuse Reed SPDT Switch +0 +3 +3 +Button_Switch_SMD +SW_SPST_B3S-1000 +Surface Mount Tactile Switch for High-Density Packaging +Tactile Switch +0 +4 +2 +Button_Switch_SMD +SW_SPST_B3S-1100 +Surface Mount Tactile Switch for High-Density Packaging with Ground Terminal +Tactile Switch +0 +5 +3 +Button_Switch_SMD +SW_SPST_B3SL-1002P +Middle Stroke Tactile Switch, B3SL +Middle Stroke Tactile Switch +0 +4 +2 +Button_Switch_SMD +SW_SPST_B3SL-1022P +Middle Stroke Tactile Switch, B3SL +Middle Stroke Tactile Switch +0 +4 +2 +Button_Switch_SMD +SW_SPST_B3U-1000P +Ultra-small-sized Tactile Switch with High Contact Reliability, Top-actuated Model, without Ground Terminal, without Boss +Tactile Switch +0 +2 +2 +Button_Switch_SMD +SW_SPST_B3U-1000P-B +Ultra-small-sized Tactile Switch with High Contact Reliability, Top-actuated Model, without Ground Terminal, with Boss +Tactile Switch +0 +2 +2 +Button_Switch_SMD +SW_SPST_B3U-1100P +Ultra-small-sized Tactile Switch with High Contact Reliability, Top-actuated Model, with Ground Terminal, without Boss +Tactile Switch +0 +3 +3 +Button_Switch_SMD +SW_SPST_B3U-1100P-B +Ultra-small-sized Tactile Switch with High Contact Reliability, Top-actuated Model, with Ground Terminal, with Boss +Tactile Switch +0 +3 +3 +Button_Switch_SMD +SW_SPST_B3U-3000P +Ultra-small-sized Tactile Switch with High Contact Reliability, Side-actuated Model, without Ground Terminal, without Boss +Tactile Switch +0 +2 +2 +Button_Switch_SMD +SW_SPST_B3U-3000P-B +Ultra-small-sized Tactile Switch with High Contact Reliability, Side-actuated Model, without Ground Terminal, with Boss +Tactile Switch +0 +2 +2 +Button_Switch_SMD +SW_SPST_B3U-3100P +Ultra-small-sized Tactile Switch with High Contact Reliability, Side-actuated Model, with Ground Terminal, without Boss +Tactile Switch +0 +3 +3 +Button_Switch_SMD +SW_SPST_B3U-3100P-B +Ultra-small-sized Tactile Switch with High Contact Reliability, Side-actuated Model, with Ground Terminal, with Boss +Tactile Switch +0 +3 +3 +Button_Switch_SMD +SW_SPST_CK_KMS2xxG +Microminiature SMT Side Actuated, 4.2 x 2.8 x 1.42mm, https://www.ckswitches.com/media/1482/kms.pdf +Switch SPST KMS2 +0 +5 +3 +Button_Switch_SMD +SW_SPST_CK_KMS2xxGP +Microminiature SMT Side Actuated, 4.2 x 2.8 x 1.42mm with pegs, https://www.ckswitches.com/media/1482/kms.pdf +Switch SPST KMS2 +0 +5 +3 +Button_Switch_SMD +SW_SPST_CK_KXT3 +https://www.ckswitches.com/media/1465/kxt3.pdf +Switch SPST KXT3 +0 +2 +2 +Button_Switch_SMD +SW_SPST_CK_RS282G05A3 +https://www.mouser.com/ds/2/60/RS-282G05A-SM_RT-1159762.pdf +SPST button tactile switch +0 +2 +2 +Button_Switch_SMD +SW_SPST_EVPBF +Light Touch Switch + +0 +4 +2 +Button_Switch_SMD +SW_SPST_EVQP0 +Light Touch Switch, https://industrial.panasonic.com/cdbs/www-data/pdf/ATK0000/ATK0000CE28.pdf + +0 +4 +2 +Button_Switch_SMD +SW_SPST_EVQP2 +Light Touch Switch, https://industrial.panasonic.com/cdbs/www-data/pdf/ATK0000/ATK0000C374.pdf +SMD SMT SPST EVQP2 +0 +4 +2 +Button_Switch_SMD +SW_SPST_EVQP7A +Light Touch Switch, 2.2 N, https://www3.panasonic.biz/ac/e_download/control/switch/light-touch/catalog/sw_lt_eng_3529s_side.pdf?f_cd=402906 +tactile switch +0 +4 +2 +Button_Switch_SMD +SW_SPST_EVQP7C +Light Touch Switch, 2.2 N, https://www3.panasonic.biz/ac/e_download/control/switch/light-touch/catalog/sw_lt_eng_3529s_side.pdf?f_cd=402906 +tactile switch +0 +4 +2 +Button_Switch_SMD +SW_SPST_EVQPE1 +Light Touch Switch, https://industrial.panasonic.com/cdbs/www-data/pdf/ATK0000/ATK0000CE7.pdf + +0 +2 +2 +Button_Switch_SMD +SW_SPST_EVQQ2 +Light Touch Switch, https://industrial.panasonic.com/cdbs/www-data/pdf/ATK0000/ATK0000CE28.pdf + +0 +4 +2 +Button_Switch_SMD +SW_SPST_FSMSM +http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=1437566-3&DocType=Customer+Drawing&DocLang=English +SPST button tactile switch +0 +2 +2 +Button_Switch_SMD +SW_SPST_Omron_B3FS-100xP +Surface Mount Tactile Switch for High-Density Mounting, 3.1mm height, https://omronfs.omron.com/en_US/ecb/products/pdf/en-b3fs.pdf +Tactile Switch +0 +4 +2 +Button_Switch_SMD +SW_SPST_Omron_B3FS-101xP +Surface Mount Tactile Switch for High-Density Mounting, 4.3mm height, https://omronfs.omron.com/en_US/ecb/products/pdf/en-b3fs.pdf +Tactile Switch +0 +4 +2 +Button_Switch_SMD +SW_SPST_Omron_B3FS-105xP +Surface Mount Tactile Switch for High-Density Mounting, 7.3mm height, https://omronfs.omron.com/en_US/ecb/products/pdf/en-b3fs.pdf +Tactile Switch +0 +4 +2 +Button_Switch_SMD +SW_SPST_PTS645 +C&K Components SPST SMD PTS645 Series 6mm Tact Switch +SPST Button Switch +0 +4 +2 +Button_Switch_SMD +SW_SPST_PTS810 +C&K Components, PTS 810 Series, Microminiature SMT Top Actuated, http://www.ckswitches.com/media/1476/pts810.pdf +SPST Button Switch +0 +4 +2 +Button_Switch_SMD +SW_SPST_Panasonic_EVQPL_3PL_5PL_PT_A08 +Light Touch Switch, http://industrial.panasonic.com/cdbs/www-data/pdf/ATK0000/ATK0000CE3.pdf +SMD SMT SPST EVQPL EVQPT +0 +6 +3 +Button_Switch_SMD +SW_SPST_Panasonic_EVQPL_3PL_5PL_PT_A15 +Light Touch Switch, http://industrial.panasonic.com/cdbs/www-data/pdf/ATK0000/ATK0000CE3.pdf +SMD SMT SPST EVQPL EVQPT +0 +6 +3 +Button_Switch_SMD +SW_SPST_REED_CT05-XXXX-G1 +Coto Technologies SPST Reed Switch CT05-XXXX-G1 +Coto Reed SPST Switch +0 +2 +2 +Button_Switch_SMD +SW_SPST_REED_CT05-XXXX-J1 +Coto Technologies SPST Reed Switch CT05-XXXX-J1 +Coto Reed SPST Switch +0 +2 +2 +Button_Switch_SMD +SW_SPST_REED_CT10-XXXX-G1 +Coto Technologies SPST Reed Switch CT10-XXXX-G1 +Coto Reed SPST Switch +0 +2 +2 +Button_Switch_SMD +SW_SPST_REED_CT10-XXXX-G2 +Coto Technologies SPST Reed Switch CT10-XXXX-G2 +Coto Reed SPST Switch +0 +2 +2 +Button_Switch_SMD +SW_SPST_REED_CT10-XXXX-G4 +Coto Technologies SPST Reed Switch CT10-XXXX-G4 +Coto Reed SPST Switch +0 +2 +2 +Button_Switch_SMD +SW_SPST_SKQG_WithStem +ALPS 5.2mm Square Low-profile Type (Surface Mount) SKQG Series, With stem, http://www.alps.com/prod/info/E/HTML/Tact/SurfaceMount/SKQG/SKQGAFE010.html +SPST Button Switch +0 +4 +2 +Button_Switch_SMD +SW_SPST_SKQG_WithoutStem +ALPS 5.2mm Square Low-profile Type (Surface Mount) SKQG Series, Without stem, http://www.alps.com/prod/info/E/HTML/Tact/SurfaceMount/SKQG/SKQGAEE010.html +SPST Button Switch +0 +4 +2 +Button_Switch_SMD +SW_SPST_TL3305A +https://www.e-switch.com/system/asset/product_line/data_sheet/213/TL3305.pdf +TL3305 Series Tact Switch +0 +4 +2 +Button_Switch_SMD +SW_SPST_TL3305B +https://www.e-switch.com/system/asset/product_line/data_sheet/213/TL3305.pdf +TL3305 Series Tact Switch +0 +4 +2 +Button_Switch_SMD +SW_SPST_TL3305C +https://www.e-switch.com/system/asset/product_line/data_sheet/213/TL3305.pdf +TL3305 Series Tact Switch +0 +4 +2 +Button_Switch_SMD +SW_SPST_TL3342 +Low-profile SMD Tactile Switch, https://www.e-switch.com/system/asset/product_line/data_sheet/165/TL3342.pdf +SPST Tactile Switch +0 +4 +2 +Button_Switch_SMD +SW_Tactile_SPST_NO_Straight_CK_PTS636Sx25SMTRLFS +Tactile switch, SPST, 6.0x3.5 mm, H2.5 mm, straight, NO, gull wing leads: https://www.ckswitches.com/media/2779/pts636.pdf +switch tactile SPST 1P1T straight NO SMTR C&K +0 +2 +2 +Button_Switch_THT +KSA_Tactile_SPST +KSA http://www.ckswitches.com/media/1457/ksa_ksl.pdf +SWITCH SMD KSA SW +0 +5 +5 +Button_Switch_THT +Nidec_Copal_SH-7010C +4-bit rotary coded switch, through-hole, https://www.nidec-copal-electronics.com/e/catalog/switch/sh-7000.pdf +rotary switch bcd +0 +6 +5 +Button_Switch_THT +Push_E-Switch_KS01Q01 +E-Switch KS01Q01 http://spec_sheets.e-switch.com/specs/29-KS01Q01.pdf +Push Button +0 +4 +4 +Button_Switch_THT +SW_CW_GPTS203211B +SPST Off-On Pushbutton, 1A, 30V, CW Industries P/N GPTS203211B, http://switches-connectors-custom.cwind.com/Asset/GPTS203211BR2.pdf +SPST button switch Off-On +0 +2 +2 +Button_Switch_THT +SW_CuK_JS202011AQN_DPDT_Angled +CuK sub miniature slide switch, JS series, DPDT, right angle, http://www.ckswitches.com/media/1422/js.pdf +switch DPDT +0 +6 +6 +Button_Switch_THT +SW_CuK_JS202011CQN_DPDT_Straight +CuK sub miniature slide switch, JS series, DPDT, right angle, http://www.ckswitches.com/media/1422/js.pdf +switch DPDT +0 +6 +6 +Button_Switch_THT +SW_CuK_OS102011MA1QN1_SPDT_Angled +CuK miniature slide switch, OS series, SPDT, right angle, http://www.ckswitches.com/media/1428/os.pdf +switch SPDT +0 +5 +3 +Button_Switch_THT +SW_DIP_SPSTx01_Piano_10.8x4.1mm_W7.62mm_P2.54mm +1x-dip-switch SPST , Piano, row spacing 7.62 mm (300 mils), body size 10.8x4.1mm +DIP Switch SPST Piano 7.62mm 300mil +0 +2 +2 +Button_Switch_THT +SW_DIP_SPSTx01_Slide_6.7x4.1mm_W7.62mm_P2.54mm_LowProfile +1x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 6.7x4.1mm (see e.g. https://www.ctscorp.com/wp-content/uploads/209-210.pdf), LowProfile +DIP Switch SPST Slide 7.62mm 300mil LowProfile +0 +2 +2 +Button_Switch_THT +SW_DIP_SPSTx01_Slide_9.78x4.72mm_W7.62mm_P2.54mm +1x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 9.78x4.72mm (see e.g. https://www.ctscorp.com/wp-content/uploads/206-208.pdf) +DIP Switch SPST Slide 7.62mm 300mil +0 +2 +2 +Button_Switch_THT +SW_DIP_SPSTx02_Piano_10.8x6.64mm_W7.62mm_P2.54mm +2x-dip-switch SPST , Piano, row spacing 7.62 mm (300 mils), body size 10.8x6.64mm +DIP Switch SPST Piano 7.62mm 300mil +0 +4 +4 +Button_Switch_THT +SW_DIP_SPSTx02_Piano_CTS_Series194-2MSTN_W7.62mm_P2.54mm +2x-dip-switch SPST CTS_Series194-2MSTN, Piano, row spacing 7.62 mm (300 mils), body size (see https://www.ctscorp.com/wp-content/uploads/194-195.pdf) +DIP Switch SPST Piano 7.62mm 300mil +0 +4 +4 +Button_Switch_THT +SW_DIP_SPSTx02_Slide_6.7x6.64mm_W7.62mm_P2.54mm_LowProfile +2x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 6.7x6.64mm (see e.g. https://www.ctscorp.com/wp-content/uploads/209-210.pdf), LowProfile +DIP Switch SPST Slide 7.62mm 300mil LowProfile +0 +4 +4 +Button_Switch_THT +SW_DIP_SPSTx02_Slide_9.78x7.26mm_W7.62mm_P2.54mm +2x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 9.78x7.26mm (see e.g. https://www.ctscorp.com/wp-content/uploads/206-208.pdf) +DIP Switch SPST Slide 7.62mm 300mil +0 +4 +4 +Button_Switch_THT +SW_DIP_SPSTx03_Piano_10.8x9.18mm_W7.62mm_P2.54mm +3x-dip-switch SPST , Piano, row spacing 7.62 mm (300 mils), body size 10.8x9.18mm +DIP Switch SPST Piano 7.62mm 300mil +0 +6 +6 +Button_Switch_THT +SW_DIP_SPSTx03_Piano_CTS_Series194-3MSTN_W7.62mm_P2.54mm +3x-dip-switch SPST CTS_Series194-3MSTN, Piano, row spacing 7.62 mm (300 mils), body size (see https://www.ctscorp.com/wp-content/uploads/194-195.pdf) +DIP Switch SPST Piano 7.62mm 300mil +0 +6 +6 +Button_Switch_THT +SW_DIP_SPSTx03_Slide_6.7x9.18mm_W7.62mm_P2.54mm_LowProfile +3x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 6.7x9.18mm (see e.g. https://www.ctscorp.com/wp-content/uploads/209-210.pdf), LowProfile +DIP Switch SPST Slide 7.62mm 300mil LowProfile +0 +6 +6 +Button_Switch_THT +SW_DIP_SPSTx03_Slide_9.78x9.8mm_W7.62mm_P2.54mm +3x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 9.78x9.8mm (see e.g. https://www.ctscorp.com/wp-content/uploads/206-208.pdf) +DIP Switch SPST Slide 7.62mm 300mil +0 +6 +6 +Button_Switch_THT +SW_DIP_SPSTx04_Piano_10.8x11.72mm_W7.62mm_P2.54mm +4x-dip-switch SPST , Piano, row spacing 7.62 mm (300 mils), body size 10.8x11.72mm +DIP Switch SPST Piano 7.62mm 300mil +0 +8 +8 +Button_Switch_THT +SW_DIP_SPSTx04_Piano_CTS_Series194-4MSTN_W7.62mm_P2.54mm +4x-dip-switch SPST CTS_Series194-4MSTN, Piano, row spacing 7.62 mm (300 mils), body size (see https://www.ctscorp.com/wp-content/uploads/194-195.pdf) +DIP Switch SPST Piano 7.62mm 300mil +0 +8 +8 +Button_Switch_THT +SW_DIP_SPSTx04_Slide_6.7x11.72mm_W7.62mm_P2.54mm_LowProfile +4x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 6.7x11.72mm (see e.g. https://www.ctscorp.com/wp-content/uploads/209-210.pdf), LowProfile +DIP Switch SPST Slide 7.62mm 300mil LowProfile +0 +8 +8 +Button_Switch_THT +SW_DIP_SPSTx04_Slide_9.78x12.34mm_W7.62mm_P2.54mm +4x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 9.78x12.34mm (see e.g. https://www.ctscorp.com/wp-content/uploads/206-208.pdf) +DIP Switch SPST Slide 7.62mm 300mil +0 +8 +8 +Button_Switch_THT +SW_DIP_SPSTx05_Piano_10.8x14.26mm_W7.62mm_P2.54mm +5x-dip-switch SPST , Piano, row spacing 7.62 mm (300 mils), body size 10.8x14.26mm +DIP Switch SPST Piano 7.62mm 300mil +0 +10 +10 +Button_Switch_THT +SW_DIP_SPSTx05_Piano_CTS_Series194-5MSTN_W7.62mm_P2.54mm +5x-dip-switch SPST CTS_Series194-5MSTN, Piano, row spacing 7.62 mm (300 mils), body size (see https://www.ctscorp.com/wp-content/uploads/194-195.pdf) +DIP Switch SPST Piano 7.62mm 300mil +0 +10 +10 +Button_Switch_THT +SW_DIP_SPSTx05_Slide_6.7x14.26mm_W7.62mm_P2.54mm_LowProfile +5x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 6.7x14.26mm (see e.g. https://www.ctscorp.com/wp-content/uploads/209-210.pdf), LowProfile +DIP Switch SPST Slide 7.62mm 300mil LowProfile +0 +10 +10 +Button_Switch_THT +SW_DIP_SPSTx05_Slide_9.78x14.88mm_W7.62mm_P2.54mm +5x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 9.78x14.88mm (see e.g. https://www.ctscorp.com/wp-content/uploads/206-208.pdf) +DIP Switch SPST Slide 7.62mm 300mil +0 +10 +10 +Button_Switch_THT +SW_DIP_SPSTx06_Piano_10.8x16.8mm_W7.62mm_P2.54mm +6x-dip-switch SPST , Piano, row spacing 7.62 mm (300 mils), body size 10.8x16.8mm +DIP Switch SPST Piano 7.62mm 300mil +0 +12 +12 +Button_Switch_THT +SW_DIP_SPSTx06_Piano_CTS_Series194-6MSTN_W7.62mm_P2.54mm +6x-dip-switch SPST CTS_Series194-6MSTN, Piano, row spacing 7.62 mm (300 mils), body size (see https://www.ctscorp.com/wp-content/uploads/194-195.pdf) +DIP Switch SPST Piano 7.62mm 300mil +0 +12 +12 +Button_Switch_THT +SW_DIP_SPSTx06_Slide_6.7x16.8mm_W7.62mm_P2.54mm_LowProfile +6x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 6.7x16.8mm (see e.g. https://www.ctscorp.com/wp-content/uploads/209-210.pdf), LowProfile +DIP Switch SPST Slide 7.62mm 300mil LowProfile +0 +12 +12 +Button_Switch_THT +SW_DIP_SPSTx06_Slide_9.78x17.42mm_W7.62mm_P2.54mm +6x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 9.78x17.42mm (see e.g. https://www.ctscorp.com/wp-content/uploads/206-208.pdf) +DIP Switch SPST Slide 7.62mm 300mil +0 +12 +12 +Button_Switch_THT +SW_DIP_SPSTx07_Piano_10.8x19.34mm_W7.62mm_P2.54mm +7x-dip-switch SPST , Piano, row spacing 7.62 mm (300 mils), body size 10.8x19.34mm +DIP Switch SPST Piano 7.62mm 300mil +0 +14 +14 +Button_Switch_THT +SW_DIP_SPSTx07_Piano_CTS_Series194-7MSTN_W7.62mm_P2.54mm +7x-dip-switch SPST CTS_Series194-7MSTN, Piano, row spacing 7.62 mm (300 mils), body size (see https://www.ctscorp.com/wp-content/uploads/194-195.pdf) +DIP Switch SPST Piano 7.62mm 300mil +0 +14 +14 +Button_Switch_THT +SW_DIP_SPSTx07_Slide_6.7x19.34mm_W7.62mm_P2.54mm_LowProfile +7x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 6.7x19.34mm (see e.g. https://www.ctscorp.com/wp-content/uploads/209-210.pdf), LowProfile +DIP Switch SPST Slide 7.62mm 300mil LowProfile +0 +14 +14 +Button_Switch_THT +SW_DIP_SPSTx07_Slide_9.78x19.96mm_W7.62mm_P2.54mm +7x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 9.78x19.96mm (see e.g. https://www.ctscorp.com/wp-content/uploads/206-208.pdf) +DIP Switch SPST Slide 7.62mm 300mil +0 +14 +14 +Button_Switch_THT +SW_DIP_SPSTx08_Piano_10.8x21.88mm_W7.62mm_P2.54mm +8x-dip-switch SPST , Piano, row spacing 7.62 mm (300 mils), body size 10.8x21.88mm +DIP Switch SPST Piano 7.62mm 300mil +0 +16 +16 +Button_Switch_THT +SW_DIP_SPSTx08_Piano_CTS_Series194-8MSTN_W7.62mm_P2.54mm +8x-dip-switch SPST CTS_Series194-8MSTN, Piano, row spacing 7.62 mm (300 mils), body size (see https://www.ctscorp.com/wp-content/uploads/194-195.pdf) +DIP Switch SPST Piano 7.62mm 300mil +0 +16 +16 +Button_Switch_THT +SW_DIP_SPSTx08_Slide_6.7x21.88mm_W7.62mm_P2.54mm_LowProfile +8x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 6.7x21.88mm (see e.g. https://www.ctscorp.com/wp-content/uploads/209-210.pdf), LowProfile +DIP Switch SPST Slide 7.62mm 300mil LowProfile +0 +16 +16 +Button_Switch_THT +SW_DIP_SPSTx08_Slide_9.78x22.5mm_W7.62mm_P2.54mm +8x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 9.78x22.5mm (see e.g. https://www.ctscorp.com/wp-content/uploads/206-208.pdf) +DIP Switch SPST Slide 7.62mm 300mil +0 +16 +16 +Button_Switch_THT +SW_DIP_SPSTx09_Piano_10.8x24.42mm_W7.62mm_P2.54mm +9x-dip-switch SPST , Piano, row spacing 7.62 mm (300 mils), body size 10.8x24.42mm +DIP Switch SPST Piano 7.62mm 300mil +0 +18 +18 +Button_Switch_THT +SW_DIP_SPSTx09_Piano_CTS_Series194-9MSTN_W7.62mm_P2.54mm +9x-dip-switch SPST CTS_Series194-9MSTN, Piano, row spacing 7.62 mm (300 mils), body size (see https://www.ctscorp.com/wp-content/uploads/194-195.pdf) +DIP Switch SPST Piano 7.62mm 300mil +0 +18 +18 +Button_Switch_THT +SW_DIP_SPSTx09_Slide_6.7x24.42mm_W7.62mm_P2.54mm_LowProfile +9x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 6.7x24.42mm (see e.g. https://www.ctscorp.com/wp-content/uploads/209-210.pdf), LowProfile +DIP Switch SPST Slide 7.62mm 300mil LowProfile +0 +18 +18 +Button_Switch_THT +SW_DIP_SPSTx09_Slide_9.78x25.04mm_W7.62mm_P2.54mm +9x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 9.78x25.04mm (see e.g. https://www.ctscorp.com/wp-content/uploads/206-208.pdf) +DIP Switch SPST Slide 7.62mm 300mil +0 +18 +18 +Button_Switch_THT +SW_DIP_SPSTx10_Piano_10.8x26.96mm_W7.62mm_P2.54mm +10x-dip-switch SPST , Piano, row spacing 7.62 mm (300 mils), body size 10.8x26.96mm +DIP Switch SPST Piano 7.62mm 300mil +0 +20 +20 +Button_Switch_THT +SW_DIP_SPSTx10_Piano_CTS_Series194-10MSTN_W7.62mm_P2.54mm +10x-dip-switch SPST CTS_Series194-10MSTN, Piano, row spacing 7.62 mm (300 mils), body size (see https://www.ctscorp.com/wp-content/uploads/194-195.pdf) +DIP Switch SPST Piano 7.62mm 300mil +0 +20 +20 +Button_Switch_THT +SW_DIP_SPSTx10_Slide_6.7x26.96mm_W7.62mm_P2.54mm_LowProfile +10x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 6.7x26.96mm (see e.g. https://www.ctscorp.com/wp-content/uploads/209-210.pdf), LowProfile +DIP Switch SPST Slide 7.62mm 300mil LowProfile +0 +20 +20 +Button_Switch_THT +SW_DIP_SPSTx10_Slide_9.78x27.58mm_W7.62mm_P2.54mm +10x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 9.78x27.58mm (see e.g. https://www.ctscorp.com/wp-content/uploads/206-208.pdf) +DIP Switch SPST Slide 7.62mm 300mil +0 +20 +20 +Button_Switch_THT +SW_DIP_SPSTx11_Piano_10.8x29.5mm_W7.62mm_P2.54mm +11x-dip-switch SPST , Piano, row spacing 7.62 mm (300 mils), body size 10.8x29.5mm +DIP Switch SPST Piano 7.62mm 300mil +0 +22 +22 +Button_Switch_THT +SW_DIP_SPSTx11_Piano_CTS_Series194-11MSTN_W7.62mm_P2.54mm +11x-dip-switch SPST CTS_Series194-11MSTN, Piano, row spacing 7.62 mm (300 mils), body size (see https://www.ctscorp.com/wp-content/uploads/194-195.pdf) +DIP Switch SPST Piano 7.62mm 300mil +0 +22 +22 +Button_Switch_THT +SW_DIP_SPSTx11_Slide_6.7x29.5mm_W7.62mm_P2.54mm_LowProfile +11x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 6.7x29.5mm (see e.g. https://www.ctscorp.com/wp-content/uploads/209-210.pdf), LowProfile +DIP Switch SPST Slide 7.62mm 300mil LowProfile +0 +22 +22 +Button_Switch_THT +SW_DIP_SPSTx11_Slide_9.78x30.12mm_W7.62mm_P2.54mm +11x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 9.78x30.12mm (see e.g. https://www.ctscorp.com/wp-content/uploads/206-208.pdf) +DIP Switch SPST Slide 7.62mm 300mil +0 +22 +22 +Button_Switch_THT +SW_DIP_SPSTx12_Piano_10.8x32.04mm_W7.62mm_P2.54mm +12x-dip-switch SPST , Piano, row spacing 7.62 mm (300 mils), body size 10.8x32.04mm +DIP Switch SPST Piano 7.62mm 300mil +0 +24 +24 +Button_Switch_THT +SW_DIP_SPSTx12_Piano_CTS_Series194-12MSTN_W7.62mm_P2.54mm +12x-dip-switch SPST CTS_Series194-12MSTN, Piano, row spacing 7.62 mm (300 mils), body size (see https://www.ctscorp.com/wp-content/uploads/194-195.pdf) +DIP Switch SPST Piano 7.62mm 300mil +0 +24 +24 +Button_Switch_THT +SW_DIP_SPSTx12_Slide_6.7x32.04mm_W7.62mm_P2.54mm_LowProfile +12x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 6.7x32.04mm (see e.g. https://www.ctscorp.com/wp-content/uploads/209-210.pdf), LowProfile +DIP Switch SPST Slide 7.62mm 300mil LowProfile +0 +24 +24 +Button_Switch_THT +SW_DIP_SPSTx12_Slide_9.78x32.66mm_W7.62mm_P2.54mm +12x-dip-switch SPST , Slide, row spacing 7.62 mm (300 mils), body size 9.78x32.66mm (see e.g. https://www.ctscorp.com/wp-content/uploads/206-208.pdf) +DIP Switch SPST Slide 7.62mm 300mil +0 +24 +24 +Button_Switch_THT +SW_E-Switch_EG1224_SPDT_Angled +E-Switch slide switch, EG series, SPDT, right angle, http://spec_sheets.e-switch.com/specs/P040042.pdf +switch SPDT +0 +7 +3 +Button_Switch_THT +SW_E-Switch_EG1271_SPDT +E-Switch sub miniature slide switch, EG series, SPDT, https://www.e-switch.com/wp-content/uploads/2022/06/EG.pdf +switch SPDT +0 +6 +6 +Button_Switch_THT +SW_E-Switch_EG2219_DPDT_Angled +E-Switch slide switch, EG series, DPDT, right angle, http://spec_sheets.e-switch.com/specs/P040170.pdf +switch DPDT +0 +10 +6 +Button_Switch_THT +SW_Lever_1P2T_NKK_GW12LxH +Switch, single pole double throw, right angle, http://www.nkkswitches.com/pdf/GW.pdf +switch single-pole double-throw spdt ON-ON horizontal +0 +5 +3 +Button_Switch_THT +SW_MEC_5GTH9 +MEC 5G single pole normally-open tactile switch https://cdn.sos.sk/productdata/80/f6/aabf7be6/5gth9358222.pdf +switch normally-open pushbutton push-button +0 +4 +2 +Button_Switch_THT +SW_NKK_BB15AH +https://www.nkkswitches.com/pdf/Bpushbuttons-1.pdf +Pushbutton Right-angle +0 +5 +3 +Button_Switch_THT +SW_NKK_G1xJP +Switch NKK G1xJP http://www.nkkswitches.com/pdf/gwillum.pdf +SWITCH TOGGLE ILLUM SPDT NKK +0 +6 +6 +Button_Switch_THT +SW_NKK_GW12LJP +Switch, single pole double throw, illuminated paddle, http://www.nkkswitches.com/pdf/gwillum.pdf +switch single-pole double-throw spdt ON-ON illuminated LED +0 +6 +6 +Button_Switch_THT +SW_NKK_NR01 +NKK Switches NR01 series rotary switch, 10.7 x 10.7mm. https://www.nkkswitches.com/pdf/NR01%20Rotaries.pdf +NKK NR01 SP3T SP4T SP5T +0 +10 +7 +Button_Switch_THT +SW_PUSH-12mm +SW PUSH 12mm https://www.e-switch.com/system/asset/product_line/data_sheet/143/TL1100.pdf +tact sw push 12mm +0 +4 +2 +Button_Switch_THT +SW_PUSH-12mm_Wuerth-430476085716 +SW PUSH 12mm http://katalog.we-online.de/em/datasheet/430476085716.pdf +tact sw push 12mm +0 +4 +2 +Button_Switch_THT +SW_PUSH_1P1T_6x3.5mm_H4.3_APEM_MJTP1243 +tactile push button, 6x3.5mm, https://www.apem.com/idec-apem/en_US/PCB-switches/Tactile-Switches/MJTP-6mm-through-hole/c/MJTP_6mm_through%20hole?page=1 +PHAP3362 6mm tact sw THT +0 +2 +2 +Button_Switch_THT +SW_PUSH_1P1T_6x3.5mm_H5.0_APEM_MJTP1250 +tactile push button, 6x3.5mm, https://www.apem.com/idec-apem/en_US/PCB-switches/Tactile-Switches/MJTP-6mm-through-hole/c/MJTP_6mm_through%20hole?page=1 +PHAP3362A 6mm tact sw THT +0 +2 +2 +Button_Switch_THT +SW_PUSH_6mm +https://www.omron.com/ecb/products/pdf/en-b3f.pdf +tact sw push 6mm +0 +4 +2 +Button_Switch_THT +SW_PUSH_6mm_H4.3mm +tactile push button, 6x6mm e.g. PHAP33xx series, height=4.3mm +tact sw push 6mm +0 +4 +2 +Button_Switch_THT +SW_PUSH_6mm_H5mm +tactile push button, 6x6mm e.g. PHAP33xx series, height=5mm +tact sw push 6mm +0 +4 +2 +Button_Switch_THT +SW_PUSH_6mm_H7.3mm +tactile push button, 6x6mm e.g. PHAP33xx series, height=7.3mm +tact sw push 6mm +0 +4 +2 +Button_Switch_THT +SW_PUSH_6mm_H8.5mm +tactile push button, 6x6mm e.g. PHAP33xx series, height=8.5mm +tact sw push 6mm +0 +4 +2 +Button_Switch_THT +SW_PUSH_6mm_H8mm +tactile push button, 6x6mm e.g. PHAP33xx series, height=8mm +tact sw push 6mm +0 +4 +2 +Button_Switch_THT +SW_PUSH_6mm_H9.5mm +tactile push button, 6x6mm e.g. PHAP33xx series, height=9.5mm +tact sw push 6mm +0 +4 +2 +Button_Switch_THT +SW_PUSH_6mm_H13mm +tactile push button, 6x6mm e.g. PHAP33xx series, height=13mm +tact sw push 6mm +0 +4 +2 +Button_Switch_THT +SW_PUSH_E-Switch_FS5700DP_DPDT +FS5700 series pushbutton footswitch, DPDT, https://www.e-switch.com/system/asset/product_line/data_sheet/226/FS5700.pdf +switch DPDT footswitch +0 +6 +6 +Button_Switch_THT +SW_PUSH_LCD_E3_SAxxxx +Switch with LCD screen E3 SAxxxx +switch normally-open pushbutton push-button LCD +0 +6 +6 +Button_Switch_THT +SW_PUSH_LCD_E3_SAxxxx_SocketPins +Switch with LCD screen E3 SAxxxx +switch normally-open pushbutton push-button LCD +0 +6 +6 +Button_Switch_THT +SW_Push_1P1T_NO_LED_E-Switch_TL1250 +illuminated right angle tact switch https://www.e-switch.com/system/asset/product_line/data_sheet/148/TL1250.pdf +led push switch right angle +0 +6 +4 +Button_Switch_THT +SW_Push_1P2T_Vertical_E-Switch_800UDP8P1A1M6 + right angle SPDT push button https://www.e-switch.com/system/asset/product_line/data_sheet/210/800U.pdf +IP67 ultra-miniture horizontal +0 +5 +3 +Button_Switch_THT +SW_Push_2P1T_Toggle_CK_PVA1xxH1xxxxxxV2 +momentary / push-push button, h=17.5mm C&K PVA1 https://www.ckswitches.com/media/1343/pva.pdf +tact sw push PVA1 DPST +0 +4 +4 +Button_Switch_THT +SW_Push_2P1T_Toggle_CK_PVA1xxH2xxxxxxV2 +momentary / push-push button, h=23mm C&K PVA1 https://www.ckswitches.com/media/1343/pva.pdf +tact sw push PVA1 DPST +0 +4 +4 +Button_Switch_THT +SW_Push_2P1T_Toggle_CK_PVA1xxH3xxxxxxV2 +momentary / push-push button, h=20.5mm C&K PVA1 https://www.ckswitches.com/media/1343/pva.pdf +tact sw push PVA1 DPST +0 +4 +4 +Button_Switch_THT +SW_Push_2P1T_Toggle_CK_PVA1xxH4xxxxxxV2 +momentary / push-push button, h=15mm C&K PVA1 https://www.ckswitches.com/media/1343/pva.pdf +tact sw push PVA1 DPST +0 +4 +4 +Button_Switch_THT +SW_Push_2P2T_Toggle_CK_PVA2OAH5xxxxxxV2 +momentary / push-push button, h=13mm C&K PVA2 https://www.ckswitches.com/media/1343/pva.pdf +tact sw push PVA2 DPDT +0 +6 +6 +Button_Switch_THT +SW_Push_2P2T_Toggle_CK_PVA2xxH1xxxxxxV2 +momentary / push-push button, h=17.5mm C&K PVA2 https://www.ckswitches.com/media/1343/pva.pdf +tact sw push PVA2 DPDT +0 +6 +6 +Button_Switch_THT +SW_Push_2P2T_Toggle_CK_PVA2xxH2xxxxxxV2 +momentary / push-push button, h=23mm C&K PVA2 https://www.ckswitches.com/media/1343/pva.pdf +tact sw push PVA2 DPDT +0 +6 +6 +Button_Switch_THT +SW_Push_2P2T_Toggle_CK_PVA2xxH3xxxxxxV2 +momentary / push-push button, h=20.5mm C&K PVA2 https://www.ckswitches.com/media/1343/pva.pdf +tact sw push PVA2 DPDT +0 +6 +6 +Button_Switch_THT +SW_Push_2P2T_Toggle_CK_PVA2xxH4xxxxxxV2 +momentary / push-push button, h=15mm C&K PVA2 https://www.ckswitches.com/media/1343/pva.pdf +tact sw push PVA2 DPDT +0 +6 +6 +Button_Switch_THT +SW_Push_2P2T_Vertical_E-Switch_800UDP8P1A1M6 + right angle DPDT push button https://www.e-switch.com/system/asset/product_line/data_sheet/210/800U.pdf +IP67 ultra-miniture horizontal +0 +8 +6 +Button_Switch_THT +SW_SPST_Omron_B3F-315x_Angled +tactile switch, 7.3mm x 6.25mm x 7.4mm, right angle, https://omronfs.omron.com/en_US/ecb/products/pdf/en-b3f.pdf +tactile switch Omron B3F right angle through hole +0 +4 +2 +Button_Switch_THT +SW_Slide_1P2T_CK_OS102011MS2Q +CuK miniature slide switch, OS series, SPDT, https://www.ckswitches.com/media/1428/os.pdf +switch SPDT +0 +5 +3 +Button_Switch_THT +SW_TH_Tactile_Omron_B3F-10xx +SW_TH_Tactile_Omron_B3F-10xx_https://www.omron.com/ecb/products/pdf/en-b3f.pdf +Omron B3F-10xx +0 +4 +2 +Button_Switch_THT +SW_Tactile_SKHH_Angled +tactile switch 6mm ALPS SKHH right angle http://www.alps.com/prod/info/E/HTML/Tact/SnapIn/SKHH/SKHHLUA010.html +tactile switch 6mm ALPS SKHH right angle +0 +4 +2 +Button_Switch_THT +SW_Tactile_SPST_Angled_PTS645Vx31-2LFS +tactile switch SPST right angle, PTS645VL31-2 LFS +tactile switch SPST angled PTS645VL31-2 LFS C&K Button +0 +4 +2 +Button_Switch_THT +SW_Tactile_SPST_Angled_PTS645Vx39-2LFS +tactile switch SPST right angle, PTS645VL39-2 LFS +tactile switch SPST angled PTS645VL39-2 LFS C&K Button +0 +4 +2 +Button_Switch_THT +SW_Tactile_SPST_Angled_PTS645Vx58-2LFS +tactile switch SPST right angle, PTS645VL58-2 LFS +tactile switch SPST angled PTS645VL58-2 LFS C&K Button +0 +4 +2 +Button_Switch_THT +SW_Tactile_SPST_Angled_PTS645Vx83-2LFS +tactile switch SPST right angle, PTS645VL83-2 LFS +tactile switch SPST angled PTS645VL83-2 LFS C&K Button +0 +4 +2 +Button_Switch_THT +SW_Tactile_Straight_KSA0Axx1LFTR +SW PUSH SMALL http://www.ckswitches.com/media/1457/ksa_ksl.pdf +SW PUSH SMALL Tactile C&K +0 +4 +2 +Button_Switch_THT +SW_Tactile_Straight_KSL0Axx1LFTR +SW PUSH SMALL http://www.ckswitches.com/media/1457/ksa_ksl.pdf +SW PUSH SMALL Tactile C&K +0 +4 +2 +Buzzer_Beeper +Buzzer_12x9.5RM7.6 +Generic Buzzer, D12mm height 9.5mm with RM7.6mm +buzzer +0 +2 +2 +Buzzer_Beeper +Buzzer_15x7.5RM7.6 +Generic Buzzer, D15mm height 7.5mm with RM7.6mm +buzzer +0 +2 +2 +Buzzer_Beeper +Buzzer_CUI_CPT-9019S-SMT +https://www.cui.com/product/resource/cpt-9019s-smt.pdf +buzzer piezo +0 +2 +2 +Buzzer_Beeper +Buzzer_D14mm_H7mm_P10mm +Generic Buzzer, D14mm height 7mm with pitch 10mm +buzzer +0 +2 +2 +Buzzer_Beeper +Buzzer_Mallory_AST1109MLTRQ +Mallory low-profile piezo buzzer, https://mspindy.com/spec-sheets/AST1109MLTRQ.pdf +buzzer piezo +0 +2 +2 +Buzzer_Beeper +Buzzer_Mallory_AST1240MLQ +Mallory low-profile piezo buzzer, https://www.mspindy.com/specifications/AST12140MLQ.pdf +piezo buzzer +0 +2 +2 +Buzzer_Beeper +Buzzer_Murata_PKLCS1212E +Murata Buzzer https://www.murata.com/~/media/webrenewal/support/library/catalog/products/sound/p37e.ashx +Murata Buzzer Beeper +0 +2 +2 +Buzzer_Beeper +Buzzer_Murata_PKMCS0909E +Murata Buzzer http://www.murata.com/en-us/api/pdfdownloadapi?cate=&partno=PKMCS0909E4000-R1 +Murata Buzzer Beeper +0 +2 +2 +Buzzer_Beeper +Buzzer_TDK_PS1240P02BT_D12.2mm_H6.5mm +Buzzer, D12.2mm height 6.5mm, https://product.tdk.com/info/en/catalog/datasheets/piezoelectronic_buzzer_ps_en.pdf +buzzer +0 +2 +2 +Buzzer_Beeper +Indicator_PUI_AI-1440-TWT-24V-2-R +14mm Indicator, https://www.puiaudio.com/media/SpecSheet/AI-1440-TWT-24V-2-R.pdf +piezo buzzer self drive oscillator +0 +2 +2 +Buzzer_Beeper +MagneticBuzzer_CUI_CMT-8504-100-SMT +magnetic transducer buzzer, 5V, SPL of 100 dB at 10 cm, https://www.cuidevices.com/product/resource/pdf/cmt-8504-100-smt-tr.pdf +CMT 8504 +0 +4 +4 +Buzzer_Beeper +MagneticBuzzer_CUI_CST-931RP-A +CST-931RP-A, http://www.cui.com/product/resource/cst-931rp-a.pdf +CST-931RP-A +0 +2 +2 +Buzzer_Beeper +MagneticBuzzer_Kingstate_KCG0601 +Buzzer, Elektromagnetic Beeper, Summer, +Kingstate KCG0601 +0 +2 +2 +Buzzer_Beeper +MagneticBuzzer_Kobitone_254-EMB73-RO +MagneticBuzzer_Kobitone_254-EMB73-RO https://www.mouser.es/datasheet/2/209/joytech_11092018_KT-400379-1501513.pdf +MagneticBuzzer_Kobitone_254-EMB73-RO +0 +2 +2 +Buzzer_Beeper +MagneticBuzzer_Kobitone_254-EMB84Q-RO +MagneticBuzzer Kobitone 254-EMB84Q-RO https://www.mouser.es/datasheet/2/209/KT-400385-1171904.pdf +MagneticBuzzer Kobitone 254-EMB84Q-RO +0 +3 +3 +Buzzer_Beeper +MagneticBuzzer_PUI_AT-0927-TT-6-R +Buzzer Magnetic 9mm AT-0927-TT-6-R, http://www.puiaudio.com/pdf/AT-0927-TT-6-R.pdf +Buzzer Magnetic 9mm AT-0927-TT-6-R +0 +2 +2 +Buzzer_Beeper +MagneticBuzzer_PUI_SMT-1028-T-2-R +Buzzer, 2830Hz, 3.6Vpp, 90dbA@10cm, Top sound port, 10x10x3,5mm, https://api.puiaudio.com/file/612539d9-c50b-48de-88aa-b63ef8817a91.pdf +SMT 1028 +0 +4 +3 +Buzzer_Beeper +MagneticBuzzer_ProSignal_ABI-009-RC +Buzzer, Elektromagnetic Beeper, Summer, 6V-DC, +Pro Signal ABI-009-RC +0 +2 +2 +Buzzer_Beeper +MagneticBuzzer_ProSignal_ABI-010-RC +Buzzer, Elektromagnetic Beeper, Summer, 12V-DC, +Pro Signal ABI-010-RC +0 +2 +2 +Buzzer_Beeper +MagneticBuzzer_ProSignal_ABT-410-RC +Buzzer, Elektromagnetic Beeper, Summer, 1,5V-DC, +Pro Signal ABT-410-RC +0 +2 +2 +Buzzer_Beeper +MagneticBuzzer_ProjectsUnlimited_AI-4228-TWT-R +Buzzer, Elektromagnetic Beeper, Summer, 3-28V-DC, https://www.kynix.com/uploadfiles/pdf/AI-4228-TWT-R.pdf +Projects Unlimited AI-4228-TWT-R +0 +2 +2 +Buzzer_Beeper +MagneticBuzzer_StarMicronics_HMB-06_HMB-12 +Buzzer, Elektromagnetic Beeper, Summer, +Star Micronics HMB-06 HMB-12 +0 +2 +2 +Buzzer_Beeper +PUIAudio_SMT_0825_S_4_R +SMD 8540, http://www.puiaudio.com/product-detail.aspx?partnumber=SMT-0825-S-4-R +SMD 8540 +0 +4 +4 +Buzzer_Beeper +Speaker_CUI_CMR-1206S-67 +Speaker, 30mW, 300-7000Hz, IP67 face, 12x6x2,25mm, https://www.cuidevices.com/product/resource/cmr-12062s-67.pdf +speaker CUI +0 +2 +2 +C.022uF50v +K223K15X7RF5UL2 +K223K15X7RF5UL2-1 +Capacitor +0 +2 +2 +C47u35v +CAPPRD200W50D525H1250 +5*11 +Capacitor Polarised +0 +2 +2 +C47u63v +CAPPRD350W65D800H1250 +EEU-EB1J470SJ-1 +Capacitor Polarised +0 +2 +2 +Calibration_Scale +Gauge_10mm_Type1_CopperTop +Gauge, Massstab, 10mm, CopperTop, Type 1, +Gauge Massstab 10mm CopperTop Type 1 +0 +0 +0 +Calibration_Scale +Gauge_10mm_Type1_SilkScreenTop +Gauge, Massstab, 10mm, SilkScreenTop, Type 1, +Gauge Massstab 10mm SilkScreenTop Type 1 +0 +0 +0 +Calibration_Scale +Gauge_10mm_Type2_CopperTop +Gauge, Massstab, 10mm, CopperTop, Type 2, +Gauge Massstab 10mm CopperTop Type 2 +0 +0 +0 +Calibration_Scale +Gauge_10mm_Type2_SilkScreenTop +Gauge, Massstab, 10mm, SilkScreenTop, Type 2, +Gauge Massstab 10mm SilkScreenTop Type 2 +0 +0 +0 +Calibration_Scale +Gauge_10mm_Type3_CopperTop +Gauge, Massstab, 10mm, CopperTop, Type 3, +Gauge Massstab 10mm CopperTop Type 3 +0 +0 +0 +Calibration_Scale +Gauge_10mm_Type3_SilkScreenTop +Gauge, Massstab, 10mm, SilkScreenTop, Type 3, +Gauge Massstab 10mm SilkScreenTop Type 3 +0 +0 +0 +Calibration_Scale +Gauge_10mm_Type4_CopperTop +Gauge, Massstab, 10mm, CopperTop, Type 4, +Gauge Massstab 10mm CopperTop Type 4 +0 +0 +0 +Calibration_Scale +Gauge_10mm_Type4_SilkScreenTop +Gauge, Massstab, 10mm, SilkScreenTop, Type 4, +Gauge Massstab 10mm SilkScreenTop Type 4 +0 +0 +0 +Calibration_Scale +Gauge_10mm_Type5_CopperTop +Gauge, Massstab, 10mm, CopperTop, Type 5, +Gauge Massstab 10mm CopperTop Type 5 +0 +0 +0 +Calibration_Scale +Gauge_10mm_Type5_SilkScreenTop +Gauge, Massstab, 10mm, SilkScreenTop, Type 5, +Gauge Massstab 10mm SilkScreenTop Type 5 +0 +0 +0 +Calibration_Scale +Gauge_50mm_Type1_CopperTop +Gauge, Massstab, 50mm, CopperTop, Type 1, +Gauge Massstab 50mm CopperTop Type 1 +0 +0 +0 +Calibration_Scale +Gauge_50mm_Type1_SilkScreenTop +Gauge, Massstab, 50mm, SilkScreenTop, Type 1, +Gauge Massstab 50mm SilkScreenTop Type 1 +0 +0 +0 +Calibration_Scale +Gauge_50mm_Type2_CopperTop +Gauge, Massstab, 50mm, CopperTop, Type 2, +Gauge Massstab 50mm CopperTop Type 2 +0 +0 +0 +Calibration_Scale +Gauge_50mm_Type2_SilkScreenTop +Gauge, Massstab, 50mm, SilkScreenTop, Type 2, +Gauge Massstab 50mm SilkScreenTop Type 2 +0 +0 +0 +Calibration_Scale +Gauge_100mm_Grid_Type1_CopperTop +Gauge, Massstab, 100mm, Gitter, Grid, CopperTop, Type 1, +Gauge Massstab 100mm Gitter Grid CopperTop Type 1 +0 +0 +0 +Calibration_Scale +Gauge_100mm_Type1_CopperTop +Gauge, Massstab, 100mm, CopperTop, Type 1, +Gauge Massstab 100mm CopperTop Type 1 +0 +0 +0 +Calibration_Scale +Gauge_100mm_Type1_SilkScreenTop +Gauge, Massstab, 100mm, SilkScreenTop, Type 1, +Gauge Massstab 100mm SilkScreenTop Type 1 +0 +0 +0 +Calibration_Scale +Gauge_100mm_Type2_CopperTop +Gauge, Massstab, 100mm, CopperTop, Type 2, +Gauge Massstab 100mm CopperTop Type 2 +0 +0 +0 +Calibration_Scale +Gauge_100mm_Type2_SilkScreenTop +Gauge, Massstab, 100mm, SilkScreenTop, Type 2, +Gauge Massstab 100mm SilkScreenTop Type 2 +0 +0 +0 +Capacitor_SMD +CP_Elec_3x5.3 +SMT capacitor, aluminium electrolytic, 3x5.3, Cornell Dubilier Electronics +Capacitor Electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_3x5.4 +SMD capacitor, aluminum electrolytic, Nichicon, 3.0x5.4mm +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_4x3 +SMD capacitor, aluminum electrolytic, Nichicon, 4.0x3mm +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_4x3.9 +SMD capacitor, aluminum electrolytic, Nichicon, 4.0x3.9mm +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_4x4.5 +SMD capacitor, aluminum electrolytic, Nichicon, 4.0x4.5mm +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_4x5.3 +SMD capacitor, aluminum electrolytic, Vishay, 4.0x5.3mm +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_4x5.4 +SMD capacitor, aluminum electrolytic, Panasonic A5 / Nichicon, 4.0x5.4mm +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_4x5.7 +SMD capacitor, aluminum electrolytic, United Chemi-Con, 4.0x5.7mm +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_4x5.8 +SMD capacitor, aluminum electrolytic, Panasonic, 4.0x5.8mm +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_5x3 +SMD capacitor, aluminum electrolytic, Nichicon, 5.0x3.0mm +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_5x3.9 +SMD capacitor, aluminum electrolytic, Nichicon, 5.0x3.9mm +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_5x4.4 +SMD capacitor, aluminum electrolytic, Panasonic B45, 5.0x4.4mm +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_5x4.5 +SMD capacitor, aluminum electrolytic, Nichicon, 5.0x4.5mm +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_5x5.3 +SMD capacitor, aluminum electrolytic, Nichicon, 5.0x5.3mm +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_5x5.4 +SMD capacitor, aluminum electrolytic, Nichicon, 5.0x5.4mm +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_5x5.7 +SMD capacitor, aluminum electrolytic, United Chemi-Con, 5.0x5.7mm +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_5x5.8 +SMD capacitor, aluminum electrolytic, Panasonic, 5.0x5.8mm +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_5x5.9 +SMD capacitor, aluminum electrolytic, Panasonic B6, 5.0x5.9mm +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_6.3x3 +SMD capacitor, aluminum electrolytic, Nichicon, 6.3x3.0mm +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_6.3x3.9 +SMD capacitor, aluminum electrolytic, Nichicon, 6.3x3.9mm +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_6.3x4.5 +SMD capacitor, aluminum electrolytic, Nichicon, 6.3x4.5mm +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_6.3x4.9 +SMD capacitor, aluminum electrolytic, Panasonic C5, 6.3x4.9mm +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_6.3x5.2 +SMD capacitor, aluminum electrolytic, United Chemi-Con, 6.3x5.2mm +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_6.3x5.3 +SMD capacitor, aluminum electrolytic, Cornell Dubilier, 6.3x5.3mm +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_6.3x5.4 +SMD capacitor, aluminum electrolytic, Panasonic C55, 6.3x5.4mm +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_6.3x5.4_Nichicon +SMD capacitor, aluminum electrolytic, Nichicon, 6.3x5.4mm +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_6.3x5.7 +SMD capacitor, aluminum electrolytic, United Chemi-Con, 6.3x5.7mm +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_6.3x5.8 +SMD capacitor, aluminum electrolytic, Nichicon, 6.3x5.8mm +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_6.3x5.9 +SMD capacitor, aluminum electrolytic, Panasonic C6, 6.3x5.9mm +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_6.3x7.7 +SMD capacitor, aluminum electrolytic, Nichicon, 6.3x7.7mm +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_6.3x9.9 +SMD capacitor, aluminum electrolytic, Panasonic C10, 6.3x9.9mm +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_8x5.4 +SMD capacitor, aluminum electrolytic, Nichicon, 8.0x5.4mm +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_8x6.2 +SMD capacitor, aluminum electrolytic, Nichicon, 8.0x6.2mm +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_8x6.5 +SMD capacitor, aluminum electrolytic, Rubycon, 8.0x6.5mm +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_8x6.7 +SMD capacitor, aluminum electrolytic, United Chemi-Con, 8.0x6.7mm +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_8x6.9 +SMD capacitor, aluminum electrolytic, Panasonic E7, 8.0x6.9mm +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_8x10 +SMD capacitor, aluminum electrolytic, Nichicon, 8.0x10mm +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_8x10.5 +SMD capacitor, aluminum electrolytic, Vishay 0810, 8.0x10.5mm, http://www.vishay.com/docs/28395/150crz.pdf +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_8x11.9 +SMD capacitor, aluminum electrolytic, Panasonic E12, 8.0x11.9mm +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_10x7.7 +SMD capacitor, aluminum electrolytic, Nichicon, 10.0x7.7mm +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_10x7.9 +SMD capacitor, aluminum electrolytic, Panasonic F8, 10.0x7.9mm +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_10x10 +SMD capacitor, aluminum electrolytic, Nichicon, 10.0x10.0mm +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_10x10.5 +SMD capacitor, aluminum electrolytic, Vishay 1010, 10.0x10.5mm, http://www.vishay.com/docs/28395/150crz.pdf +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_10x12.5 +SMD capacitor, aluminum electrolytic, Vishay 1012, 10.0x12.5mm, http://www.vishay.com/docs/28395/150crz.pdf +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_10x12.6 +SMD capacitor, aluminum electrolytic, Panasonic F12, 10.0x12.6mm +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_10x14.3 +SMD capacitor, aluminum electrolytic, Vishay 1014, 10.0x14.3mm, http://www.vishay.com/docs/28395/150crz.pdf +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_16x17.5 +SMD capacitor, aluminum electrolytic, Vishay 1616, 16.0x17.5mm, http://www.vishay.com/docs/28395/150crz.pdf +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_16x22 +SMD capacitor, aluminum electrolytic, Vishay 1621, 16.0x22.0mm, http://www.vishay.com/docs/28395/150crz.pdf +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_18x17.5 +SMD capacitor, aluminum electrolytic, Vishay 1816, 18.0x17.5mm, http://www.vishay.com/docs/28395/150crz.pdf +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_18x22 +SMD capacitor, aluminum electrolytic, Vishay 1821, 18.0x22.0mm, http://www.vishay.com/docs/28395/150crz.pdf +capacitor electrolytic +0 +2 +2 +Capacitor_SMD +CP_Elec_CAP-XX_DMF3Zxxxxxxxx3D +5.5V, 470mF supercapacitor, 45mohm, -40ºC to +70ºC, https://www.cap-xx.com/wp-content/uploads/datasheets/CAP-XX-DMF470mF-Datasheet.pdf +supercap +0 +3 +3 +Capacitor_SMD +C_0201_0603Metric +Capacitor SMD 0201 (0603 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://www.vishay.com/docs/20052/crcw0201e3.pdf), generated with kicad-footprint-generator +capacitor +0 +4 +2 +Capacitor_SMD +C_0201_0603Metric_Pad0.64x0.40mm_HandSolder +Capacitor SMD 0201 (0603 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://www.vishay.com/docs/20052/crcw0201e3.pdf), generated with kicad-footprint-generator +capacitor handsolder +0 +4 +2 +Capacitor_SMD +C_0402_1005Metric +Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator +capacitor +0 +2 +2 +Capacitor_SMD +C_0402_1005Metric_Pad0.74x0.62mm_HandSolder +Capacitor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator +capacitor handsolder +0 +2 +2 +Capacitor_SMD +C_0504_1310Metric +Capacitor SMD 0504 (1310 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator +capacitor +0 +2 +2 +Capacitor_SMD +C_0504_1310Metric_Pad0.83x1.28mm_HandSolder +Capacitor SMD 0504 (1310 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator +capacitor handsolder +0 +2 +2 +Capacitor_SMD +C_0603_1608Metric +Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator +capacitor +0 +2 +2 +Capacitor_SMD +C_0603_1608Metric_Pad1.08x0.95mm_HandSolder +Capacitor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator +capacitor handsolder +0 +2 +2 +Capacitor_SMD +C_0805_2012Metric +Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator +capacitor +0 +2 +2 +Capacitor_SMD +C_0805_2012Metric_Pad1.18x1.45mm_HandSolder +Capacitor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf, https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator +capacitor handsolder +0 +2 +2 +Capacitor_SMD +C_01005_0402Metric +Capacitor SMD 01005 (0402 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.vishay.com/docs/20056/crcw01005e3.pdf), generated with kicad-footprint-generator +capacitor +0 +4 +2 +Capacitor_SMD +C_01005_0402Metric_Pad0.57x0.30mm_HandSolder +Capacitor SMD 01005 (0402 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: http://www.vishay.com/docs/20056/crcw01005e3.pdf), generated with kicad-footprint-generator +capacitor handsolder +0 +4 +2 +Capacitor_SMD +C_1206_3216Metric +Capacitor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator +capacitor +0 +2 +2 +Capacitor_SMD +C_1206_3216Metric_Pad1.33x1.80mm_HandSolder +Capacitor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator +capacitor handsolder +0 +2 +2 +Capacitor_SMD +C_1210_3225Metric +Capacitor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator +capacitor +0 +2 +2 +Capacitor_SMD +C_1210_3225Metric_Pad1.33x2.70mm_HandSolder +Capacitor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator +capacitor handsolder +0 +2 +2 +Capacitor_SMD +C_1812_4532Metric +Capacitor SMD 1812 (4532 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator +capacitor +0 +2 +2 +Capacitor_SMD +C_1812_4532Metric_Pad1.57x3.40mm_HandSolder +Capacitor SMD 1812 (4532 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator +capacitor handsolder +0 +2 +2 +Capacitor_SMD +C_1825_4564Metric +Capacitor SMD 1825 (4564 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size from: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator +capacitor +0 +2 +2 +Capacitor_SMD +C_1825_4564Metric_Pad1.57x6.80mm_HandSolder +Capacitor SMD 1825 (4564 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size from: IPC-SM-782 page 76, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator +capacitor handsolder +0 +2 +2 +Capacitor_SMD +C_2220_5750Metric +Capacitor SMD 2220 (5750 Metric), square (rectangular) end terminal, IPC-7351 nominal, (Body size from: http://datasheets.avx.com/AVX-HV_MLCC.pdf), generated with kicad-footprint-generator +capacitor +0 +2 +2 +Capacitor_SMD +C_2220_5750Metric_Pad1.97x5.40mm_HandSolder +Capacitor SMD 2220 (5750 Metric), square (rectangular) end terminal, IPC-7351 nominal with elongated pad for handsoldering. (Body size from: http://datasheets.avx.com/AVX-HV_MLCC.pdf), generated with kicad-footprint-generator +capacitor handsolder +0 +2 +2 +Capacitor_SMD +C_2225_5664Metric +Capacitor SMD 2225 (5664 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size from: http://datasheets.avx.com/AVX-HV_MLCC.pdf), generated with kicad-footprint-generator +capacitor +0 +2 +2 +Capacitor_SMD +C_2225_5664Metric_Pad1.80x6.60mm_HandSolder +Capacitor SMD 2225 (5664 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size from: http://datasheets.avx.com/AVX-HV_MLCC.pdf), generated with kicad-footprint-generator +capacitor handsolder +0 +2 +2 +Capacitor_SMD +C_3640_9110Metric +Capacitor SMD 3640 (9110 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size from: http://datasheets.avx.com/AVX-HV_MLCC.pdf), generated with kicad-footprint-generator +capacitor +0 +2 +2 +Capacitor_SMD +C_3640_9110Metric_Pad2.10x10.45mm_HandSolder +Capacitor SMD 3640 (9110 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size from: http://datasheets.avx.com/AVX-HV_MLCC.pdf), generated with kicad-footprint-generator +capacitor handsolder +0 +2 +2 +Capacitor_SMD +C_Elec_3x5.4 +SMD capacitor, aluminum electrolytic nonpolar, 3.0x5.4mm +capacitor electrolyic nonpolar +0 +2 +2 +Capacitor_SMD +C_Elec_4x5.4 +SMD capacitor, aluminum electrolytic nonpolar, 4.0x5.4mm +capacitor electrolyic nonpolar +0 +2 +2 +Capacitor_SMD +C_Elec_4x5.8 +SMD capacitor, aluminum electrolytic nonpolar, 4.0x5.8mm +capacitor electrolyic nonpolar +0 +2 +2 +Capacitor_SMD +C_Elec_5x5.4 +SMD capacitor, aluminum electrolytic nonpolar, 5.0x5.4mm +capacitor electrolyic nonpolar +0 +2 +2 +Capacitor_SMD +C_Elec_5x5.8 +SMD capacitor, aluminum electrolytic nonpolar, 5.0x5.8mm +capacitor electrolyic nonpolar +0 +2 +2 +Capacitor_SMD +C_Elec_6.3x5.4 +SMD capacitor, aluminum electrolytic nonpolar, 6.3x5.4mm +capacitor electrolyic nonpolar +0 +2 +2 +Capacitor_SMD +C_Elec_6.3x5.8 +SMD capacitor, aluminum electrolytic nonpolar, 6.3x5.8mm +capacitor electrolyic nonpolar +0 +2 +2 +Capacitor_SMD +C_Elec_6.3x7.7 +SMD capacitor, aluminum electrolytic nonpolar, 6.3x7.7mm +capacitor electrolyic nonpolar +0 +2 +2 +Capacitor_SMD +C_Elec_8x5.4 +SMD capacitor, aluminum electrolytic nonpolar, 8.0x5.4mm +capacitor electrolyic nonpolar +0 +2 +2 +Capacitor_SMD +C_Elec_8x6.2 +SMD capacitor, aluminum electrolytic nonpolar, 8.0x6.2mm +capacitor electrolyic nonpolar +0 +2 +2 +Capacitor_SMD +C_Elec_8x10.2 +SMD capacitor, aluminum electrolytic nonpolar, 8.0x10.2mm +capacitor electrolyic nonpolar +0 +2 +2 +Capacitor_SMD +C_Elec_10x10.2 +SMD capacitor, aluminum electrolytic nonpolar, 10.0x10.2mm +capacitor electrolyic nonpolar +0 +2 +2 +Capacitor_SMD +C_Trimmer_Murata_TZB4-A +trimmer capacitor SMD horizontal, http://www.murata.com/~/media/webrenewal/support/library/catalog/products/capacitor/trimmer/t13e.ashx?la=en-gb + Murata TZB4 TZB4-A +0 +2 +2 +Capacitor_SMD +C_Trimmer_Murata_TZB4-B +trimmer capacitor SMD horizontal, http://www.murata.com/~/media/webrenewal/support/library/catalog/products/capacitor/trimmer/t13e.ashx?la=en-gb + Murata TZB4 TZB4-A +0 +2 +2 +Capacitor_SMD +C_Trimmer_Murata_TZC3 +trimmer capacitor SMD horizontal, http://www.murata.com/~/media/webrenewal/support/library/catalog/products/capacitor/trimmer/t13e.ashx?la=en-gb + Murata TZC3 +0 +2 +2 +Capacitor_SMD +C_Trimmer_Murata_TZR1 +trimmer capacitor SMD horizontal, http://www.murata.com/~/media/webrenewal/support/library/catalog/products/capacitor/trimmer/t13e.ashx?la=en-gb + Murata TZR1 +0 +2 +2 +Capacitor_SMD +C_Trimmer_Murata_TZW4 +trimmer capacitor SMD horizontal, http://www.murata.com/~/media/webrenewal/support/library/catalog/products/capacitor/trimmer/t13e.ashx?la=en-gb + Murata TZW4 +0 +2 +2 +Capacitor_SMD +C_Trimmer_Murata_TZY2 +trimmer capacitor SMD horizontal, http://www.murata.com/~/media/webrenewal/support/library/catalog/products/capacitor/trimmer/t13e.ashx?la=en-gb + Murata TZY2 +0 +2 +2 +Capacitor_SMD +C_Trimmer_Sprague-Goodman_SGC3 +trimmer capacitor SMD horizontal, http://media.wix.com/ugd/d86717_38d9821e12823a7aa9cef38c6c2a73cc.pdf + Sprague Goodman SGC3 +0 +2 +2 +Capacitor_SMD +C_Trimmer_Voltronics_JN +trimmer capacitor SMD horizontal, http://www.knowlescapacitors.com/File%20Library/Voltronics/English/GlobalNavigation/Products/Trimmer%20Capacitors/CerChipTrimCap.pdf + Voltronics JN +0 +2 +2 +Capacitor_SMD +C_Trimmer_Voltronics_JQ +trimmer capacitor SMD horizontal, http://www.knowlescapacitors.com/File%20Library/Voltronics/English/GlobalNavigation/Products/Trimmer%20Capacitors/CerChipTrimCap.pdf + Voltronics JQ +0 +2 +2 +Capacitor_SMD +C_Trimmer_Voltronics_JR +trimmer capacitor SMD horizontal, http://www.knowlescapacitors.com/File%20Library/Voltronics/English/GlobalNavigation/Products/Trimmer%20Capacitors/CerChipTrimCap.pdf + Voltronics JR +0 +2 +2 +Capacitor_SMD +C_Trimmer_Voltronics_JV +trimmer capacitor SMD horizontal, http://www.knowlescapacitors.com/File%20Library/Voltronics/English/GlobalNavigation/Products/Trimmer%20Capacitors/CerChipTrimCap.pdf + Voltronics JV +0 +2 +2 +Capacitor_SMD +C_Trimmer_Voltronics_JZ +trimmer capacitor SMD horizontal, http://www.knowlescapacitors.com/File%20Library/Voltronics/English/GlobalNavigation/Products/Trimmer%20Capacitors/CerChipTrimCap.pdf + Voltronics JR +0 +2 +2 +Capacitor_THT +CP_Axial_L10.0mm_D4.5mm_P15.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=15mm, , length*diameter=10*4.5mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/28325/021asm.pdf +CP Axial series Axial Horizontal pin pitch 15mm length 10mm diameter 4.5mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L10.0mm_D6.0mm_P15.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=15mm, , length*diameter=10*6mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/28325/021asm.pdf +CP Axial series Axial Horizontal pin pitch 15mm length 10mm diameter 6mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L11.0mm_D5.0mm_P18.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=18mm, , length*diameter=11*5mm^2, Electrolytic Capacitor +CP Axial series Axial Horizontal pin pitch 18mm length 11mm diameter 5mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L11.0mm_D6.0mm_P18.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=18mm, , length*diameter=11*6mm^2, Electrolytic Capacitor +CP Axial series Axial Horizontal pin pitch 18mm length 11mm diameter 6mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L11.0mm_D8.0mm_P15.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=15mm, , length*diameter=11*8mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/28325/021asm.pdf +CP Axial series Axial Horizontal pin pitch 15mm length 11mm diameter 8mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L18.0mm_D6.5mm_P25.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=25mm, , length*diameter=18*6.5mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/28325/021asm.pdf +CP Axial series Axial Horizontal pin pitch 25mm length 18mm diameter 6.5mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L18.0mm_D8.0mm_P25.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=25mm, , length*diameter=18*8mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/28325/021asm.pdf +CP Axial series Axial Horizontal pin pitch 25mm length 18mm diameter 8mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L18.0mm_D10.0mm_P25.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=25mm, , length*diameter=18*10mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/28325/021asm.pdf +CP Axial series Axial Horizontal pin pitch 25mm length 18mm diameter 10mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L20.0mm_D10.0mm_P26.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=26mm, , length*diameter=20*10mm^2, Electrolytic Capacitor, , http://www.kemet.com/Lists/ProductCatalog/Attachments/424/KEM_AC102.pdf +CP Axial series Axial Horizontal pin pitch 26mm length 20mm diameter 10mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L20.0mm_D13.0mm_P26.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=26mm, , length*diameter=20*13mm^2, Electrolytic Capacitor, , http://www.kemet.com/Lists/ProductCatalog/Attachments/424/KEM_AC102.pdf +CP Axial series Axial Horizontal pin pitch 26mm length 20mm diameter 13mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L21.0mm_D8.0mm_P28.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=28mm, , length*diameter=21*8mm^2, Electrolytic Capacitor +CP Axial series Axial Horizontal pin pitch 28mm length 21mm diameter 8mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L25.0mm_D10.0mm_P30.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=30mm, , length*diameter=25*10mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/28325/021asm.pdf +CP Axial series Axial Horizontal pin pitch 30mm length 25mm diameter 10mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L26.5mm_D20.0mm_P33.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=33mm, , length*diameter=26.5*20mm^2, Electrolytic Capacitor, , http://www.kemet.com/Lists/ProductCatalog/Attachments/424/KEM_AC102.pdf +CP Axial series Axial Horizontal pin pitch 33mm length 26.5mm diameter 20mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L29.0mm_D10.0mm_P35.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=35mm, , length*diameter=29*10mm^2, Electrolytic Capacitor, , http://www.kemet.com/Lists/ProductCatalog/Attachments/424/KEM_AC102.pdf +CP Axial series Axial Horizontal pin pitch 35mm length 29mm diameter 10mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L29.0mm_D13.0mm_P35.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=35mm, , length*diameter=29*13mm^2, Electrolytic Capacitor, , http://www.kemet.com/Lists/ProductCatalog/Attachments/424/KEM_AC102.pdf +CP Axial series Axial Horizontal pin pitch 35mm length 29mm diameter 13mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L29.0mm_D16.0mm_P35.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=35mm, , length*diameter=29*16mm^2, Electrolytic Capacitor, , http://www.kemet.com/Lists/ProductCatalog/Attachments/424/KEM_AC102.pdf +CP Axial series Axial Horizontal pin pitch 35mm length 29mm diameter 16mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L29.0mm_D20.0mm_P35.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=35mm, , length*diameter=29*20mm^2, Electrolytic Capacitor, , http://www.kemet.com/Lists/ProductCatalog/Attachments/424/KEM_AC102.pdf +CP Axial series Axial Horizontal pin pitch 35mm length 29mm diameter 20mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L30.0mm_D10.0mm_P35.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=35mm, , length*diameter=30*10mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/28325/021asm.pdf +CP Axial series Axial Horizontal pin pitch 35mm length 30mm diameter 10mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L30.0mm_D12.5mm_P35.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=35mm, , length*diameter=30*12.5mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/28325/021asm.pdf +CP Axial series Axial Horizontal pin pitch 35mm length 30mm diameter 12.5mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L30.0mm_D15.0mm_P35.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=35mm, , length*diameter=30*15mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/28325/021asm.pdf +CP Axial series Axial Horizontal pin pitch 35mm length 30mm diameter 15mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L30.0mm_D18.0mm_P35.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=35mm, , length*diameter=30*18mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/28325/021asm.pdf +CP Axial series Axial Horizontal pin pitch 35mm length 30mm diameter 18mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L34.5mm_D20.0mm_P41.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=41mm, , length*diameter=34.5*20mm^2, Electrolytic Capacitor, , http://www.kemet.com/Lists/ProductCatalog/Attachments/424/KEM_AC102.pdf +CP Axial series Axial Horizontal pin pitch 41mm length 34.5mm diameter 20mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L37.0mm_D13.0mm_P43.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=43mm, , length*diameter=37*13mm^2, Electrolytic Capacitor, , http://www.kemet.com/Lists/ProductCatalog/Attachments/424/KEM_AC102.pdf +CP Axial series Axial Horizontal pin pitch 43mm length 37mm diameter 13mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L37.0mm_D16.0mm_P43.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=43mm, , length*diameter=37*16mm^2, Electrolytic Capacitor, , http://www.kemet.com/Lists/ProductCatalog/Attachments/424/KEM_AC102.pdf +CP Axial series Axial Horizontal pin pitch 43mm length 37mm diameter 16mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L37.0mm_D20.0mm_P43.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=43mm, , length*diameter=37*20mm^2, Electrolytic Capacitor, , http://www.kemet.com/Lists/ProductCatalog/Attachments/424/KEM_AC102.pdf +CP Axial series Axial Horizontal pin pitch 43mm length 37mm diameter 20mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L38.0mm_D18.0mm_P44.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=44mm, , length*diameter=38*18mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/28325/021asm.pdf +CP Axial series Axial Horizontal pin pitch 44mm length 38mm diameter 18mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L38.0mm_D21.0mm_P44.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=44mm, , length*diameter=38*21mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/28325/021asm.pdf +CP Axial series Axial Horizontal pin pitch 44mm length 38mm diameter 21mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L40.0mm_D16.0mm_P48.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=48mm, , length*diameter=40*16mm^2, Electrolytic Capacitor +CP Axial series Axial Horizontal pin pitch 48mm length 40mm diameter 16mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L42.0mm_D23.0mm_P45.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=45mm, , length*diameter=42*23.0mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/42037/53d.pdf +CP Axial series Axial Horizontal pin pitch 45mm length 42mm diameter 23.0mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L42.0mm_D26.0mm_P45.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=45mm, , length*diameter=42*26mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/42037/53d.pdf +CP Axial series Axial Horizontal pin pitch 45mm length 42mm diameter 26mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L42.0mm_D29.0mm_P45.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=45mm, , length*diameter=42*29.0mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/42037/53d.pdf +CP Axial series Axial Horizontal pin pitch 45mm length 42mm diameter 29.0mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L42.0mm_D32.0mm_P45.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=45mm, , length*diameter=42*32.0mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/42037/53d.pdf +CP Axial series Axial Horizontal pin pitch 45mm length 42mm diameter 32.0mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L42.0mm_D35.0mm_P45.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=45mm, , length*diameter=42*35.0mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/42037/53d.pdf +CP Axial series Axial Horizontal pin pitch 45mm length 42mm diameter 35.0mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L42.5mm_D20.0mm_P49.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=49mm, , length*diameter=42.5*20mm^2, Electrolytic Capacitor +CP Axial series Axial Horizontal pin pitch 49mm length 42.5mm diameter 20mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L46.0mm_D20.0mm_P52.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=52mm, , length*diameter=46*20mm^2, Electrolytic Capacitor +CP Axial series Axial Horizontal pin pitch 52mm length 46mm diameter 20mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L55.0mm_D23.0mm_P60.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=60mm, , length*diameter=55*23.0mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/42037/53d.pdf +CP Axial series Axial Horizontal pin pitch 60mm length 55mm diameter 23.0mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L55.0mm_D26.0mm_P60.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=60mm, , length*diameter=55*26mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/42037/53d.pdf +CP Axial series Axial Horizontal pin pitch 60mm length 55mm diameter 26mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L55.0mm_D29.0mm_P60.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=60mm, , length*diameter=55*29.0mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/42037/53d.pdf +CP Axial series Axial Horizontal pin pitch 60mm length 55mm diameter 29.0mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L55.0mm_D32.0mm_P60.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=60mm, , length*diameter=55*32.0mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/42037/53d.pdf +CP Axial series Axial Horizontal pin pitch 60mm length 55mm diameter 32.0mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L55.0mm_D35.0mm_P60.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=60mm, , length*diameter=55*35.0mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/42037/53d.pdf +CP Axial series Axial Horizontal pin pitch 60mm length 55mm diameter 35.0mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L67.0mm_D23.0mm_P75.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=75mm, , length*diameter=67*23.0mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/42037/53d.pdf +CP Axial series Axial Horizontal pin pitch 75mm length 67mm diameter 23.0mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L67.0mm_D26.0mm_P75.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=75mm, , length*diameter=67*26mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/42037/53d.pdf +CP Axial series Axial Horizontal pin pitch 75mm length 67mm diameter 26mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L67.0mm_D29.0mm_P75.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=75mm, , length*diameter=67*29.0mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/42037/53d.pdf +CP Axial series Axial Horizontal pin pitch 75mm length 67mm diameter 29.0mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L67.0mm_D32.0mm_P75.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=75mm, , length*diameter=67*32.0mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/42037/53d.pdf +CP Axial series Axial Horizontal pin pitch 75mm length 67mm diameter 32.0mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L67.0mm_D35.0mm_P75.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=75mm, , length*diameter=67*35.0mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/42037/53d.pdf +CP Axial series Axial Horizontal pin pitch 75mm length 67mm diameter 35.0mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L80.0mm_D23.0mm_P85.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=85mm, , length*diameter=80*23.0mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/42037/53d.pdf +CP Axial series Axial Horizontal pin pitch 85mm length 80mm diameter 23.0mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L80.0mm_D26.0mm_P85.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=85mm, , length*diameter=80*26mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/42037/53d.pdf +CP Axial series Axial Horizontal pin pitch 85mm length 80mm diameter 26mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L80.0mm_D29.0mm_P85.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=85mm, , length*diameter=80*29.0mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/42037/53d.pdf +CP Axial series Axial Horizontal pin pitch 85mm length 80mm diameter 29.0mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L80.0mm_D32.0mm_P85.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=85mm, , length*diameter=80*32.0mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/42037/53d.pdf +CP Axial series Axial Horizontal pin pitch 85mm length 80mm diameter 32.0mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L80.0mm_D35.0mm_P85.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=85mm, , length*diameter=80*35.0mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/42037/53d.pdf +CP Axial series Axial Horizontal pin pitch 85mm length 80mm diameter 35.0mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L93.0mm_D23.0mm_P100.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=100mm, , length*diameter=93*23.0mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/42037/53d.pdf +CP Axial series Axial Horizontal pin pitch 100mm length 93mm diameter 23.0mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L93.0mm_D26.0mm_P100.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=100mm, , length*diameter=93*26mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/42037/53d.pdf +CP Axial series Axial Horizontal pin pitch 100mm length 93mm diameter 26mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L93.0mm_D29.0mm_P100.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=100mm, , length*diameter=93*29.0mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/42037/53d.pdf +CP Axial series Axial Horizontal pin pitch 100mm length 93mm diameter 29.0mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L93.0mm_D32.0mm_P100.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=100mm, , length*diameter=93*32.0mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/42037/53d.pdf +CP Axial series Axial Horizontal pin pitch 100mm length 93mm diameter 32.0mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Axial_L93.0mm_D35.0mm_P100.00mm_Horizontal +CP, Axial series, Axial, Horizontal, pin pitch=100mm, , length*diameter=93*35.0mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/42037/53d.pdf +CP Axial series Axial Horizontal pin pitch 100mm length 93mm diameter 35.0mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_D4.0mm_P1.50mm +CP, Radial series, Radial, pin pitch=1.50mm, , diameter=4mm, Electrolytic Capacitor +CP Radial series Radial pin pitch 1.50mm diameter 4mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_D4.0mm_P2.00mm +CP, Radial series, Radial, pin pitch=2.00mm, , diameter=4mm, Electrolytic Capacitor +CP Radial series Radial pin pitch 2.00mm diameter 4mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_D5.0mm_P2.00mm +CP, Radial series, Radial, pin pitch=2.00mm, , diameter=5mm, Electrolytic Capacitor +CP Radial series Radial pin pitch 2.00mm diameter 5mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_D5.0mm_P2.50mm +CP, Radial series, Radial, pin pitch=2.50mm, , diameter=5mm, Electrolytic Capacitor +CP Radial series Radial pin pitch 2.50mm diameter 5mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_D6.3mm_P2.50mm +CP, Radial series, Radial, pin pitch=2.50mm, , diameter=6.3mm, Electrolytic Capacitor +CP Radial series Radial pin pitch 2.50mm diameter 6.3mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_D7.5mm_P2.50mm +CP, Radial series, Radial, pin pitch=2.50mm, , diameter=7.5mm, Electrolytic Capacitor +CP Radial series Radial pin pitch 2.50mm diameter 7.5mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_D8.0mm_P2.50mm +CP, Radial series, Radial, pin pitch=2.50mm, , diameter=8mm, Electrolytic Capacitor +CP Radial series Radial pin pitch 2.50mm diameter 8mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_D8.0mm_P3.50mm +CP, Radial series, Radial, pin pitch=3.50mm, , diameter=8mm, Electrolytic Capacitor +CP Radial series Radial pin pitch 3.50mm diameter 8mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_D8.0mm_P3.80mm +CP, Radial series, Radial, pin pitch=3.80mm, , diameter=8mm, Electrolytic Capacitor +CP Radial series Radial pin pitch 3.80mm diameter 8mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_D8.0mm_P5.00mm +CP, Radial series, Radial, pin pitch=5.00mm, , diameter=8mm, Electrolytic Capacitor +CP Radial series Radial pin pitch 5.00mm diameter 8mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_D10.0mm_P2.50mm +CP, Radial series, Radial, pin pitch=2.50mm, , diameter=10mm, Electrolytic Capacitor +CP Radial series Radial pin pitch 2.50mm diameter 10mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_D10.0mm_P2.50mm_P5.00mm +CP, Radial series, Radial, pin pitch=2.50mm 5.00mm, , diameter=10mm, Electrolytic Capacitor +CP Radial series Radial pin pitch 2.50mm 5.00mm diameter 10mm Electrolytic Capacitor +0 +4 +2 +Capacitor_THT +CP_Radial_D10.0mm_P3.50mm +CP, Radial series, Radial, pin pitch=3.50mm, , diameter=10mm, Electrolytic Capacitor +CP Radial series Radial pin pitch 3.50mm diameter 10mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_D10.0mm_P3.80mm +CP, Radial series, Radial, pin pitch=3.80mm, , diameter=10mm, Electrolytic Capacitor +CP Radial series Radial pin pitch 3.80mm diameter 10mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_D10.0mm_P5.00mm +CP, Radial series, Radial, pin pitch=5.00mm, , diameter=10mm, Electrolytic Capacitor +CP Radial series Radial pin pitch 5.00mm diameter 10mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_D10.0mm_P5.00mm_P7.50mm +CP, Radial series, Radial, pin pitch=5.00mm 7.50mm, , diameter=10mm, Electrolytic Capacitor +CP Radial series Radial pin pitch 5.00mm 7.50mm diameter 10mm Electrolytic Capacitor +0 +4 +2 +Capacitor_THT +CP_Radial_D10.0mm_P7.50mm +CP, Radial series, Radial, pin pitch=7.50mm, , diameter=10mm, Electrolytic Capacitor +CP Radial series Radial pin pitch 7.50mm diameter 10mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_D12.5mm_P2.50mm +CP, Radial series, Radial, pin pitch=2.50mm, , diameter=12.5mm, Electrolytic Capacitor +CP Radial series Radial pin pitch 2.50mm diameter 12.5mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_D12.5mm_P5.00mm +CP, Radial series, Radial, pin pitch=5.00mm, , diameter=12.5mm, Electrolytic Capacitor +CP Radial series Radial pin pitch 5.00mm diameter 12.5mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_D12.5mm_P7.50mm +CP, Radial series, Radial, pin pitch=7.50mm, , diameter=12.5mm, Electrolytic Capacitor +CP Radial series Radial pin pitch 7.50mm diameter 12.5mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_D13.0mm_P2.50mm +CP, Radial series, Radial, pin pitch=2.50mm, , diameter=13mm, Electrolytic Capacitor +CP Radial series Radial pin pitch 2.50mm diameter 13mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_D13.0mm_P5.00mm +CP, Radial series, Radial, pin pitch=5.00mm, , diameter=13mm, Electrolytic Capacitor +CP Radial series Radial pin pitch 5.00mm diameter 13mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_D13.0mm_P7.50mm +CP, Radial series, Radial, pin pitch=7.50mm, , diameter=13mm, Electrolytic Capacitor +CP Radial series Radial pin pitch 7.50mm diameter 13mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_D14.0mm_P5.00mm +CP, Radial series, Radial, pin pitch=5.00mm, , diameter=14mm, Electrolytic Capacitor +CP Radial series Radial pin pitch 5.00mm diameter 14mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_D14.0mm_P7.50mm +CP, Radial series, Radial, pin pitch=7.50mm, , diameter=14mm, Electrolytic Capacitor +CP Radial series Radial pin pitch 7.50mm diameter 14mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_D16.0mm_P7.50mm +CP, Radial series, Radial, pin pitch=7.50mm, , diameter=16mm, Electrolytic Capacitor +CP Radial series Radial pin pitch 7.50mm diameter 16mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_D17.0mm_P7.50mm +CP, Radial series, Radial, pin pitch=7.50mm, , diameter=17mm, Electrolytic Capacitor +CP Radial series Radial pin pitch 7.50mm diameter 17mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_D18.0mm_P7.50mm +CP, Radial series, Radial, pin pitch=7.50mm, , diameter=18mm, Electrolytic Capacitor +CP Radial series Radial pin pitch 7.50mm diameter 18mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_D22.0mm_P10.00mm_3pin_SnapIn +CP, Radial series, Radial, pin pitch=10.00mm, diameter=22mm, height=40mm, Electrolytic Capacitor, , http://www.vishay.com/docs/28342/058059pll-si.pdf +CP Radial series Radial pin pitch 10.00mm diameter 22mm height 40mm Electrolytic Capacitor +0 +3 +2 +Capacitor_THT +CP_Radial_D22.0mm_P10.00mm_SnapIn +CP, Radial series, Radial, pin pitch=10.00mm, , diameter=22mm, Electrolytic Capacitor, , http://www.vishay.com/docs/28342/058059pll-si.pdf +CP Radial series Radial pin pitch 10.00mm diameter 22mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_D24.0mm_P10.00mm_3pin_SnapIn +CP, Radial series, Radial, pin pitch=10.00mm, diameter=24mm, height=40mm, Electrolytic Capacitor, , http://www.vishay.com/docs/28342/058059pll-si.pdf +CP Radial series Radial pin pitch 10.00mm diameter 24mm height 40mm Electrolytic Capacitor +0 +3 +2 +Capacitor_THT +CP_Radial_D24.0mm_P10.00mm_SnapIn +CP, Radial series, Radial, pin pitch=10.00mm, , diameter=24mm, Electrolytic Capacitor, , http://www.vishay.com/docs/28342/058059pll-si.pdf +CP Radial series Radial pin pitch 10.00mm diameter 24mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_D25.0mm_P10.00mm_3pin_SnapIn +CP, Radial series, Radial, pin pitch=10.00mm, diameter=25mm, height=45mm, Electrolytic Capacitor, , http://www.vishay.com/docs/28342/058059pll-si.pdf +CP Radial series Radial pin pitch 10.00mm diameter 25mm height 45mm Electrolytic Capacitor +0 +3 +2 +Capacitor_THT +CP_Radial_D25.0mm_P10.00mm_SnapIn +CP, Radial series, Radial, pin pitch=10.00mm, , diameter=25mm, Electrolytic Capacitor, , http://www.vishay.com/docs/28342/058059pll-si.pdf +CP Radial series Radial pin pitch 10.00mm diameter 25mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_D26.0mm_P10.00mm_3pin_SnapIn +CP, Radial series, Radial, pin pitch=10.00mm, diameter=26mm, height=45mm, Electrolytic Capacitor, , http://www.vishay.com/docs/28342/058059pll-si.pdf +CP Radial series Radial pin pitch 10.00mm diameter 26mm height 45mm Electrolytic Capacitor +0 +3 +2 +Capacitor_THT +CP_Radial_D26.0mm_P10.00mm_SnapIn +CP, Radial series, Radial, pin pitch=10.00mm, , diameter=26mm, Electrolytic Capacitor, , http://www.vishay.com/docs/28342/058059pll-si.pdf +CP Radial series Radial pin pitch 10.00mm diameter 26mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_D30.0mm_P10.00mm_3pin_SnapIn +CP, Radial series, Radial, pin pitch=10.00mm, diameter=30mm, height=45mm, Electrolytic Capacitor, , http://www.vishay.com/docs/28342/058059pll-si.pdf +CP Radial series Radial pin pitch 10.00mm diameter 30mm height 45mm Electrolytic Capacitor +0 +3 +2 +Capacitor_THT +CP_Radial_D30.0mm_P10.00mm_SnapIn +CP, Radial series, Radial, pin pitch=10.00mm, , diameter=30mm, Electrolytic Capacitor, , http://www.vishay.com/docs/28342/058059pll-si.pdf +CP Radial series Radial pin pitch 10.00mm diameter 30mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_D35.0mm_P10.00mm_3pin_SnapIn +CP, Radial series, Radial, pin pitch=10.00mm, diameter=35mm, height=50mm, Electrolytic Capacitor, , http://www.vishay.com/docs/28342/058059pll-si.pdf +CP Radial series Radial pin pitch 10.00mm diameter 35mm height 50mm Electrolytic Capacitor +0 +3 +2 +Capacitor_THT +CP_Radial_D35.0mm_P10.00mm_SnapIn +CP, Radial series, Radial, pin pitch=10.00mm, , diameter=35mm, Electrolytic Capacitor, , http://www.vishay.com/docs/28342/058059pll-si.pdf +CP Radial series Radial pin pitch 10.00mm diameter 35mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_D40.0mm_P10.00mm_3pin_SnapIn +CP, Radial series, Radial, pin pitch=10.00mm, diameter=40mm, height=50mm, Electrolytic Capacitor, , http://www.vishay.com/docs/28342/058059pll-si.pdf +CP Radial series Radial pin pitch 10.00mm diameter 40mm height 50mm Electrolytic Capacitor +0 +3 +2 +Capacitor_THT +CP_Radial_D40.0mm_P10.00mm_SnapIn +CP, Radial series, Radial, pin pitch=10.00mm, , diameter=40mm, Electrolytic Capacitor, , http://www.vishay.com/docs/28342/058059pll-si.pdf +CP Radial series Radial pin pitch 10.00mm diameter 40mm Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_Tantal_D4.5mm_P2.50mm +CP, Radial_Tantal series, Radial, pin pitch=2.50mm, , diameter=4.5mm, Tantal Electrolytic Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/TANTAL-TB-Serie%23.pdf +CP Radial_Tantal series Radial pin pitch 2.50mm diameter 4.5mm Tantal Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_Tantal_D4.5mm_P5.00mm +CP, Radial_Tantal series, Radial, pin pitch=5.00mm, , diameter=4.5mm, Tantal Electrolytic Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/TANTAL-TB-Serie%23.pdf +CP Radial_Tantal series Radial pin pitch 5.00mm diameter 4.5mm Tantal Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_Tantal_D5.0mm_P2.50mm +CP, Radial_Tantal series, Radial, pin pitch=2.50mm, , diameter=5.0mm, Tantal Electrolytic Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/TANTAL-TB-Serie%23.pdf +CP Radial_Tantal series Radial pin pitch 2.50mm diameter 5.0mm Tantal Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_Tantal_D5.0mm_P5.00mm +CP, Radial_Tantal series, Radial, pin pitch=5.00mm, , diameter=5.0mm, Tantal Electrolytic Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/TANTAL-TB-Serie%23.pdf +CP Radial_Tantal series Radial pin pitch 5.00mm diameter 5.0mm Tantal Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_Tantal_D5.5mm_P2.50mm +CP, Radial_Tantal series, Radial, pin pitch=2.50mm, , diameter=5.5mm, Tantal Electrolytic Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/TANTAL-TB-Serie%23.pdf +CP Radial_Tantal series Radial pin pitch 2.50mm diameter 5.5mm Tantal Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_Tantal_D5.5mm_P5.00mm +CP, Radial_Tantal series, Radial, pin pitch=5.00mm, , diameter=5.5mm, Tantal Electrolytic Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/TANTAL-TB-Serie%23.pdf +CP Radial_Tantal series Radial pin pitch 5.00mm diameter 5.5mm Tantal Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_Tantal_D6.0mm_P2.50mm +CP, Radial_Tantal series, Radial, pin pitch=2.50mm, , diameter=6.0mm, Tantal Electrolytic Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/TANTAL-TB-Serie%23.pdf +CP Radial_Tantal series Radial pin pitch 2.50mm diameter 6.0mm Tantal Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_Tantal_D6.0mm_P5.00mm +CP, Radial_Tantal series, Radial, pin pitch=5.00mm, , diameter=6.0mm, Tantal Electrolytic Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/TANTAL-TB-Serie%23.pdf +CP Radial_Tantal series Radial pin pitch 5.00mm diameter 6.0mm Tantal Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_Tantal_D7.0mm_P2.50mm +CP, Radial_Tantal series, Radial, pin pitch=2.50mm, , diameter=7.0mm, Tantal Electrolytic Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/TANTAL-TB-Serie%23.pdf +CP Radial_Tantal series Radial pin pitch 2.50mm diameter 7.0mm Tantal Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_Tantal_D7.0mm_P5.00mm +CP, Radial_Tantal series, Radial, pin pitch=5.00mm, , diameter=7.0mm, Tantal Electrolytic Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/TANTAL-TB-Serie%23.pdf +CP Radial_Tantal series Radial pin pitch 5.00mm diameter 7.0mm Tantal Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_Tantal_D8.0mm_P2.50mm +CP, Radial_Tantal series, Radial, pin pitch=2.50mm, , diameter=8.0mm, Tantal Electrolytic Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/TANTAL-TB-Serie%23.pdf +CP Radial_Tantal series Radial pin pitch 2.50mm diameter 8.0mm Tantal Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_Tantal_D8.0mm_P5.00mm +CP, Radial_Tantal series, Radial, pin pitch=5.00mm, , diameter=8.0mm, Tantal Electrolytic Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/TANTAL-TB-Serie%23.pdf +CP Radial_Tantal series Radial pin pitch 5.00mm diameter 8.0mm Tantal Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_Tantal_D9.0mm_P2.50mm +CP, Radial_Tantal series, Radial, pin pitch=2.50mm, , diameter=9.0mm, Tantal Electrolytic Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/TANTAL-TB-Serie%23.pdf +CP Radial_Tantal series Radial pin pitch 2.50mm diameter 9.0mm Tantal Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_Tantal_D9.0mm_P5.00mm +CP, Radial_Tantal series, Radial, pin pitch=5.00mm, , diameter=9.0mm, Tantal Electrolytic Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/TANTAL-TB-Serie%23.pdf +CP Radial_Tantal series Radial pin pitch 5.00mm diameter 9.0mm Tantal Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_Tantal_D10.5mm_P2.50mm +CP, Radial_Tantal series, Radial, pin pitch=2.50mm, , diameter=10.5mm, Tantal Electrolytic Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/TANTAL-TB-Serie%23.pdf +CP Radial_Tantal series Radial pin pitch 2.50mm diameter 10.5mm Tantal Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +CP_Radial_Tantal_D10.5mm_P5.00mm +CP, Radial_Tantal series, Radial, pin pitch=5.00mm, , diameter=10.5mm, Tantal Electrolytic Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/TANTAL-TB-Serie%23.pdf +CP Radial_Tantal series Radial pin pitch 5.00mm diameter 10.5mm Tantal Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +C_Axial_L3.8mm_D2.6mm_P7.50mm_Horizontal +C, Axial series, Axial, Horizontal, pin pitch=7.5mm, , length*diameter=3.8*2.6mm^2, http://www.vishay.com/docs/45231/arseries.pdf +C Axial series Axial Horizontal pin pitch 7.5mm length 3.8mm diameter 2.6mm +0 +2 +2 +Capacitor_THT +C_Axial_L3.8mm_D2.6mm_P10.00mm_Horizontal +C, Axial series, Axial, Horizontal, pin pitch=10mm, , length*diameter=3.8*2.6mm^2, http://www.vishay.com/docs/45231/arseries.pdf +C Axial series Axial Horizontal pin pitch 10mm length 3.8mm diameter 2.6mm +0 +2 +2 +Capacitor_THT +C_Axial_L3.8mm_D2.6mm_P12.50mm_Horizontal +C, Axial series, Axial, Horizontal, pin pitch=12.5mm, , length*diameter=3.8*2.6mm^2, http://www.vishay.com/docs/45231/arseries.pdf +C Axial series Axial Horizontal pin pitch 12.5mm length 3.8mm diameter 2.6mm +0 +2 +2 +Capacitor_THT +C_Axial_L3.8mm_D2.6mm_P15.00mm_Horizontal +C, Axial series, Axial, Horizontal, pin pitch=15mm, , length*diameter=3.8*2.6mm^2, http://www.vishay.com/docs/45231/arseries.pdf +C Axial series Axial Horizontal pin pitch 15mm length 3.8mm diameter 2.6mm +0 +2 +2 +Capacitor_THT +C_Axial_L5.1mm_D3.1mm_P7.50mm_Horizontal +C, Axial series, Axial, Horizontal, pin pitch=7.5mm, , length*diameter=5.1*3.1mm^2, http://www.vishay.com/docs/45231/arseries.pdf +C Axial series Axial Horizontal pin pitch 7.5mm length 5.1mm diameter 3.1mm +0 +2 +2 +Capacitor_THT +C_Axial_L5.1mm_D3.1mm_P10.00mm_Horizontal +C, Axial series, Axial, Horizontal, pin pitch=10mm, , length*diameter=5.1*3.1mm^2, http://www.vishay.com/docs/45231/arseries.pdf +C Axial series Axial Horizontal pin pitch 10mm length 5.1mm diameter 3.1mm +0 +2 +2 +Capacitor_THT +C_Axial_L5.1mm_D3.1mm_P12.50mm_Horizontal +C, Axial series, Axial, Horizontal, pin pitch=12.5mm, , length*diameter=5.1*3.1mm^2, http://www.vishay.com/docs/45231/arseries.pdf +C Axial series Axial Horizontal pin pitch 12.5mm length 5.1mm diameter 3.1mm +0 +2 +2 +Capacitor_THT +C_Axial_L5.1mm_D3.1mm_P15.00mm_Horizontal +C, Axial series, Axial, Horizontal, pin pitch=15mm, , length*diameter=5.1*3.1mm^2, http://www.vishay.com/docs/45231/arseries.pdf +C Axial series Axial Horizontal pin pitch 15mm length 5.1mm diameter 3.1mm +0 +2 +2 +Capacitor_THT +C_Axial_L12.0mm_D6.5mm_P15.00mm_Horizontal +C, Axial series, Axial, Horizontal, pin pitch=15mm, , length*diameter=12*6.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf +C Axial series Axial Horizontal pin pitch 15mm length 12mm diameter 6.5mm +0 +2 +2 +Capacitor_THT +C_Axial_L12.0mm_D6.5mm_P20.00mm_Horizontal +C, Axial series, Axial, Horizontal, pin pitch=20mm, , length*diameter=12*6.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf +C Axial series Axial Horizontal pin pitch 20mm length 12mm diameter 6.5mm +0 +2 +2 +Capacitor_THT +C_Axial_L12.0mm_D7.5mm_P15.00mm_Horizontal +C, Axial series, Axial, Horizontal, pin pitch=15mm, , length*diameter=12*7.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf +C Axial series Axial Horizontal pin pitch 15mm length 12mm diameter 7.5mm +0 +2 +2 +Capacitor_THT +C_Axial_L12.0mm_D7.5mm_P20.00mm_Horizontal +C, Axial series, Axial, Horizontal, pin pitch=20mm, , length*diameter=12*7.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf +C Axial series Axial Horizontal pin pitch 20mm length 12mm diameter 7.5mm +0 +2 +2 +Capacitor_THT +C_Axial_L12.0mm_D8.5mm_P15.00mm_Horizontal +C, Axial series, Axial, Horizontal, pin pitch=15mm, , length*diameter=12*8.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf +C Axial series Axial Horizontal pin pitch 15mm length 12mm diameter 8.5mm +0 +2 +2 +Capacitor_THT +C_Axial_L12.0mm_D8.5mm_P20.00mm_Horizontal +C, Axial series, Axial, Horizontal, pin pitch=20mm, , length*diameter=12*8.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf +C Axial series Axial Horizontal pin pitch 20mm length 12mm diameter 8.5mm +0 +2 +2 +Capacitor_THT +C_Axial_L12.0mm_D9.5mm_P15.00mm_Horizontal +C, Axial series, Axial, Horizontal, pin pitch=15mm, , length*diameter=12*9.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf +C Axial series Axial Horizontal pin pitch 15mm length 12mm diameter 9.5mm +0 +2 +2 +Capacitor_THT +C_Axial_L12.0mm_D9.5mm_P20.00mm_Horizontal +C, Axial series, Axial, Horizontal, pin pitch=20mm, , length*diameter=12*9.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf +C Axial series Axial Horizontal pin pitch 20mm length 12mm diameter 9.5mm +0 +2 +2 +Capacitor_THT +C_Axial_L12.0mm_D10.5mm_P15.00mm_Horizontal +C, Axial series, Axial, Horizontal, pin pitch=15mm, , length*diameter=12*10.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf +C Axial series Axial Horizontal pin pitch 15mm length 12mm diameter 10.5mm +0 +2 +2 +Capacitor_THT +C_Axial_L12.0mm_D10.5mm_P20.00mm_Horizontal +C, Axial series, Axial, Horizontal, pin pitch=20mm, , length*diameter=12*10.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf +C Axial series Axial Horizontal pin pitch 20mm length 12mm diameter 10.5mm +0 +2 +2 +Capacitor_THT +C_Axial_L17.0mm_D6.5mm_P20.00mm_Horizontal +C, Axial series, Axial, Horizontal, pin pitch=20mm, , length*diameter=17*6.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf +C Axial series Axial Horizontal pin pitch 20mm length 17mm diameter 6.5mm +0 +2 +2 +Capacitor_THT +C_Axial_L17.0mm_D6.5mm_P25.00mm_Horizontal +C, Axial series, Axial, Horizontal, pin pitch=25mm, , length*diameter=17*6.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf +C Axial series Axial Horizontal pin pitch 25mm length 17mm diameter 6.5mm +0 +2 +2 +Capacitor_THT +C_Axial_L17.0mm_D7.0mm_P20.00mm_Horizontal +C, Axial series, Axial, Horizontal, pin pitch=20mm, , length*diameter=17*7.0mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf +C Axial series Axial Horizontal pin pitch 20mm length 17mm diameter 7.0mm +0 +2 +2 +Capacitor_THT +C_Axial_L17.0mm_D7.0mm_P25.00mm_Horizontal +C, Axial series, Axial, Horizontal, pin pitch=25mm, , length*diameter=17*7.0mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf +C Axial series Axial Horizontal pin pitch 25mm length 17mm diameter 7.0mm +0 +2 +2 +Capacitor_THT +C_Axial_L19.0mm_D7.5mm_P25.00mm_Horizontal +C, Axial series, Axial, Horizontal, pin pitch=25mm, , length*diameter=19*7.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf +C Axial series Axial Horizontal pin pitch 25mm length 19mm diameter 7.5mm +0 +2 +2 +Capacitor_THT +C_Axial_L19.0mm_D8.0mm_P25.00mm_Horizontal +C, Axial series, Axial, Horizontal, pin pitch=25mm, , length*diameter=19*8.0mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf +C Axial series Axial Horizontal pin pitch 25mm length 19mm diameter 8.0mm +0 +2 +2 +Capacitor_THT +C_Axial_L19.0mm_D9.0mm_P25.00mm_Horizontal +C, Axial series, Axial, Horizontal, pin pitch=25mm, , length*diameter=19*9mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf +C Axial series Axial Horizontal pin pitch 25mm length 19mm diameter 9mm +0 +2 +2 +Capacitor_THT +C_Axial_L19.0mm_D9.5mm_P25.00mm_Horizontal +C, Axial series, Axial, Horizontal, pin pitch=25mm, , length*diameter=19*9.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf +C Axial series Axial Horizontal pin pitch 25mm length 19mm diameter 9.5mm +0 +2 +2 +Capacitor_THT +C_Axial_L22.0mm_D9.5mm_P27.50mm_Horizontal +C, Axial series, Axial, Horizontal, pin pitch=27.5mm, , length*diameter=22*9.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf +C Axial series Axial Horizontal pin pitch 27.5mm length 22mm diameter 9.5mm +0 +2 +2 +Capacitor_THT +C_Axial_L22.0mm_D10.5mm_P27.50mm_Horizontal +C, Axial series, Axial, Horizontal, pin pitch=27.5mm, , length*diameter=22*10.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf +C Axial series Axial Horizontal pin pitch 27.5mm length 22mm diameter 10.5mm +0 +2 +2 +Capacitor_THT +C_Disc_D3.0mm_W1.6mm_P2.50mm +C, Disc series, Radial, pin pitch=2.50mm, , diameter*width=3.0*1.6mm^2, Capacitor, http://www.vishay.com/docs/45233/krseries.pdf +C Disc series Radial pin pitch 2.50mm diameter 3.0mm width 1.6mm Capacitor +0 +2 +2 +Capacitor_THT +C_Disc_D3.0mm_W2.0mm_P2.50mm +C, Disc series, Radial, pin pitch=2.50mm, , diameter*width=3*2mm^2, Capacitor +C Disc series Radial pin pitch 2.50mm diameter 3mm width 2mm Capacitor +0 +2 +2 +Capacitor_THT +C_Disc_D3.4mm_W2.1mm_P2.50mm +C, Disc series, Radial, pin pitch=2.50mm, , diameter*width=3.4*2.1mm^2, Capacitor, http://www.vishay.com/docs/45233/krseries.pdf +C Disc series Radial pin pitch 2.50mm diameter 3.4mm width 2.1mm Capacitor +0 +2 +2 +Capacitor_THT +C_Disc_D3.8mm_W2.6mm_P2.50mm +C, Disc series, Radial, pin pitch=2.50mm, , diameter*width=3.8*2.6mm^2, Capacitor, http://www.vishay.com/docs/45233/krseries.pdf +C Disc series Radial pin pitch 2.50mm diameter 3.8mm width 2.6mm Capacitor +0 +2 +2 +Capacitor_THT +C_Disc_D4.3mm_W1.9mm_P5.00mm +C, Disc series, Radial, pin pitch=5.00mm, , diameter*width=4.3*1.9mm^2, Capacitor, http://www.vishay.com/docs/45233/krseries.pdf +C Disc series Radial pin pitch 5.00mm diameter 4.3mm width 1.9mm Capacitor +0 +2 +2 +Capacitor_THT +C_Disc_D4.7mm_W2.5mm_P5.00mm +C, Disc series, Radial, pin pitch=5.00mm, , diameter*width=4.7*2.5mm^2, Capacitor, http://www.vishay.com/docs/45233/krseries.pdf +C Disc series Radial pin pitch 5.00mm diameter 4.7mm width 2.5mm Capacitor +0 +2 +2 +Capacitor_THT +C_Disc_D5.0mm_W2.5mm_P2.50mm +C, Disc series, Radial, pin pitch=2.50mm, , diameter*width=5*2.5mm^2, Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/DS_KERKO_TC.pdf +C Disc series Radial pin pitch 2.50mm diameter 5mm width 2.5mm Capacitor +0 +2 +2 +Capacitor_THT +C_Disc_D5.0mm_W2.5mm_P5.00mm +C, Disc series, Radial, pin pitch=5.00mm, , diameter*width=5*2.5mm^2, Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/DS_KERKO_TC.pdf +C Disc series Radial pin pitch 5.00mm diameter 5mm width 2.5mm Capacitor +0 +2 +2 +Capacitor_THT +C_Disc_D5.1mm_W3.2mm_P5.00mm +C, Disc series, Radial, pin pitch=5.00mm, , diameter*width=5.1*3.2mm^2, Capacitor, http://www.vishay.com/docs/45233/krseries.pdf +C Disc series Radial pin pitch 5.00mm diameter 5.1mm width 3.2mm Capacitor +0 +2 +2 +Capacitor_THT +C_Disc_D6.0mm_W2.5mm_P5.00mm +C, Disc series, Radial, pin pitch=5.00mm, , diameter*width=6*2.5mm^2, Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/DS_KERKO_TC.pdf +C Disc series Radial pin pitch 5.00mm diameter 6mm width 2.5mm Capacitor +0 +2 +2 +Capacitor_THT +C_Disc_D6.0mm_W4.4mm_P5.00mm +C, Disc series, Radial, pin pitch=5.00mm, , diameter*width=6*4.4mm^2, Capacitor +C Disc series Radial pin pitch 5.00mm diameter 6mm width 4.4mm Capacitor +0 +2 +2 +Capacitor_THT +C_Disc_D7.0mm_W2.5mm_P5.00mm +C, Disc series, Radial, pin pitch=5.00mm, , diameter*width=7*2.5mm^2, Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/DS_KERKO_TC.pdf +C Disc series Radial pin pitch 5.00mm diameter 7mm width 2.5mm Capacitor +0 +2 +2 +Capacitor_THT +C_Disc_D7.5mm_W2.5mm_P5.00mm +C, Disc series, Radial, pin pitch=5.00mm, , diameter*width=7.5*2.5mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf +C Disc series Radial pin pitch 5.00mm diameter 7.5mm width 2.5mm Capacitor +0 +2 +2 +Capacitor_THT +C_Disc_D7.5mm_W4.4mm_P5.00mm +C, Disc series, Radial, pin pitch=5.00mm, , diameter*width=7.5*4.4mm^2, Capacitor +C Disc series Radial pin pitch 5.00mm diameter 7.5mm width 4.4mm Capacitor +0 +2 +2 +Capacitor_THT +C_Disc_D7.5mm_W5.0mm_P5.00mm +C, Disc series, Radial, pin pitch=5.00mm, , diameter*width=7.5*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf +C Disc series Radial pin pitch 5.00mm diameter 7.5mm width 5.0mm Capacitor +0 +2 +2 +Capacitor_THT +C_Disc_D7.5mm_W5.0mm_P7.50mm +C, Disc series, Radial, pin pitch=7.50mm, , diameter*width=7.5*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf +C Disc series Radial pin pitch 7.50mm diameter 7.5mm width 5.0mm Capacitor +0 +2 +2 +Capacitor_THT +C_Disc_D7.5mm_W5.0mm_P10.00mm +C, Disc series, Radial, pin pitch=10.00mm, , diameter*width=7.5*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf +C Disc series Radial pin pitch 10.00mm diameter 7.5mm width 5.0mm Capacitor +0 +2 +2 +Capacitor_THT +C_Disc_D8.0mm_W2.5mm_P5.00mm +C, Disc series, Radial, pin pitch=5.00mm, , diameter*width=8*2.5mm^2, Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/DS_KERKO_TC.pdf +C Disc series Radial pin pitch 5.00mm diameter 8mm width 2.5mm Capacitor +0 +2 +2 +Capacitor_THT +C_Disc_D8.0mm_W5.0mm_P5.00mm +C, Disc series, Radial, pin pitch=5.00mm, , diameter*width=8*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf +C Disc series Radial pin pitch 5.00mm diameter 8mm width 5.0mm Capacitor +0 +2 +2 +Capacitor_THT +C_Disc_D8.0mm_W5.0mm_P7.50mm +C, Disc series, Radial, pin pitch=7.50mm, , diameter*width=8*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf +C Disc series Radial pin pitch 7.50mm diameter 8mm width 5.0mm Capacitor +0 +2 +2 +Capacitor_THT +C_Disc_D8.0mm_W5.0mm_P10.00mm +C, Disc series, Radial, pin pitch=10.00mm, , diameter*width=8*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf +C Disc series Radial pin pitch 10.00mm diameter 8mm width 5.0mm Capacitor +0 +2 +2 +Capacitor_THT +C_Disc_D9.0mm_W2.5mm_P5.00mm +C, Disc series, Radial, pin pitch=5.00mm, , diameter*width=9*2.5mm^2, Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/DS_KERKO_TC.pdf +C Disc series Radial pin pitch 5.00mm diameter 9mm width 2.5mm Capacitor +0 +2 +2 +Capacitor_THT +C_Disc_D9.0mm_W5.0mm_P5.00mm +C, Disc series, Radial, pin pitch=5.00mm, , diameter*width=9*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf +C Disc series Radial pin pitch 5.00mm diameter 9mm width 5.0mm Capacitor +0 +2 +2 +Capacitor_THT +C_Disc_D9.0mm_W5.0mm_P7.50mm +C, Disc series, Radial, pin pitch=7.50mm, , diameter*width=9*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf +C Disc series Radial pin pitch 7.50mm diameter 9mm width 5.0mm Capacitor +0 +2 +2 +Capacitor_THT +C_Disc_D9.0mm_W5.0mm_P10.00mm +C, Disc series, Radial, pin pitch=10.00mm, , diameter*width=9*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf +C Disc series Radial pin pitch 10.00mm diameter 9mm width 5.0mm Capacitor +0 +2 +2 +Capacitor_THT +C_Disc_D10.0mm_W2.5mm_P5.00mm +C, Disc series, Radial, pin pitch=5.00mm, , diameter*width=10*2.5mm^2, Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/DS_KERKO_TC.pdf +C Disc series Radial pin pitch 5.00mm diameter 10mm width 2.5mm Capacitor +0 +2 +2 +Capacitor_THT +C_Disc_D10.5mm_W5.0mm_P5.00mm +C, Disc series, Radial, pin pitch=5.00mm, , diameter*width=10.5*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf +C Disc series Radial pin pitch 5.00mm diameter 10.5mm width 5.0mm Capacitor +0 +2 +2 +Capacitor_THT +C_Disc_D10.5mm_W5.0mm_P7.50mm +C, Disc series, Radial, pin pitch=7.50mm, , diameter*width=10.5*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf +C Disc series Radial pin pitch 7.50mm diameter 10.5mm width 5.0mm Capacitor +0 +2 +2 +Capacitor_THT +C_Disc_D10.5mm_W5.0mm_P10.00mm +C, Disc series, Radial, pin pitch=10.00mm, , diameter*width=10.5*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf +C Disc series Radial pin pitch 10.00mm diameter 10.5mm width 5.0mm Capacitor +0 +2 +2 +Capacitor_THT +C_Disc_D11.0mm_W5.0mm_P5.00mm +C, Disc series, Radial, pin pitch=5.00mm, , diameter*width=11*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf +C Disc series Radial pin pitch 5.00mm diameter 11mm width 5.0mm Capacitor +0 +2 +2 +Capacitor_THT +C_Disc_D11.0mm_W5.0mm_P7.50mm +C, Disc series, Radial, pin pitch=7.50mm, , diameter*width=11*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf +C Disc series Radial pin pitch 7.50mm diameter 11mm width 5.0mm Capacitor +0 +2 +2 +Capacitor_THT +C_Disc_D11.0mm_W5.0mm_P10.00mm +C, Disc series, Radial, pin pitch=10.00mm, , diameter*width=11*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf +C Disc series Radial pin pitch 10.00mm diameter 11mm width 5.0mm Capacitor +0 +2 +2 +Capacitor_THT +C_Disc_D12.0mm_W4.4mm_P7.75mm +C, Disc series, Radial, pin pitch=7.75mm, , diameter*width=12*4.4mm^2, Capacitor +C Disc series Radial pin pitch 7.75mm diameter 12mm width 4.4mm Capacitor +0 +2 +2 +Capacitor_THT +C_Disc_D12.5mm_W5.0mm_P7.50mm +C, Disc series, Radial, pin pitch=7.50mm, , diameter*width=12.5*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf +C Disc series Radial pin pitch 7.50mm diameter 12.5mm width 5.0mm Capacitor +0 +2 +2 +Capacitor_THT +C_Disc_D12.5mm_W5.0mm_P10.00mm +C, Disc series, Radial, pin pitch=10.00mm, , diameter*width=12.5*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf +C Disc series Radial pin pitch 10.00mm diameter 12.5mm width 5.0mm Capacitor +0 +2 +2 +Capacitor_THT +C_Disc_D14.5mm_W5.0mm_P7.50mm +C, Disc series, Radial, pin pitch=7.50mm, , diameter*width=14.5*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf +C Disc series Radial pin pitch 7.50mm diameter 14.5mm width 5.0mm Capacitor +0 +2 +2 +Capacitor_THT +C_Disc_D14.5mm_W5.0mm_P10.00mm +C, Disc series, Radial, pin pitch=10.00mm, , diameter*width=14.5*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf +C Disc series Radial pin pitch 10.00mm diameter 14.5mm width 5.0mm Capacitor +0 +2 +2 +Capacitor_THT +C_Disc_D16.0mm_W5.0mm_P7.50mm +C, Disc series, Radial, pin pitch=7.50mm, , diameter*width=16.0*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf +C Disc series Radial pin pitch 7.50mm diameter 16.0mm width 5.0mm Capacitor +0 +2 +2 +Capacitor_THT +C_Disc_D16.0mm_W5.0mm_P10.00mm +C, Disc series, Radial, pin pitch=10.00mm, , diameter*width=16.0*5.0mm^2, Capacitor, http://www.vishay.com/docs/28535/vy2series.pdf +C Disc series Radial pin pitch 10.00mm diameter 16.0mm width 5.0mm Capacitor +0 +2 +2 +Capacitor_THT +C_Radial_D4.0mm_H5.0mm_P1.50mm +C, Radial series, Radial, pin pitch=1.50mm, diameter=4mm, height=5mm, Non-Polar Electrolytic Capacitor +C Radial series Radial pin pitch 1.50mm diameter 4mm height 5mm Non-Polar Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +C_Radial_D4.0mm_H7.0mm_P1.50mm +C, Radial series, Radial, pin pitch=1.50mm, diameter=4mm, height=7mm, Non-Polar Electrolytic Capacitor +C Radial series Radial pin pitch 1.50mm diameter 4mm height 7mm Non-Polar Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +C_Radial_D5.0mm_H5.0mm_P2.00mm +C, Radial series, Radial, pin pitch=2.00mm, diameter=5mm, height=5mm, Non-Polar Electrolytic Capacitor +C Radial series Radial pin pitch 2.00mm diameter 5mm height 5mm Non-Polar Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +C_Radial_D5.0mm_H7.0mm_P2.00mm +C, Radial series, Radial, pin pitch=2.00mm, diameter=5mm, height=7mm, Non-Polar Electrolytic Capacitor +C Radial series Radial pin pitch 2.00mm diameter 5mm height 7mm Non-Polar Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +C_Radial_D5.0mm_H11.0mm_P2.00mm +C, Radial series, Radial, pin pitch=2.00mm, diameter=5mm, height=11mm, Non-Polar Electrolytic Capacitor +C Radial series Radial pin pitch 2.00mm diameter 5mm height 11mm Non-Polar Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +C_Radial_D6.3mm_H5.0mm_P2.50mm +C, Radial series, Radial, pin pitch=2.50mm, diameter=6.3mm, height=5mm, Non-Polar Electrolytic Capacitor +C Radial series Radial pin pitch 2.50mm diameter 6.3mm height 5mm Non-Polar Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +C_Radial_D6.3mm_H7.0mm_P2.50mm +C, Radial series, Radial, pin pitch=2.50mm, diameter=6.3mm, height=7mm, Non-Polar Electrolytic Capacitor +C Radial series Radial pin pitch 2.50mm diameter 6.3mm height 7mm Non-Polar Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +C_Radial_D6.3mm_H11.0mm_P2.50mm +C, Radial series, Radial, pin pitch=2.50mm, diameter=6.3mm, height=11mm, Non-Polar Electrolytic Capacitor +C Radial series Radial pin pitch 2.50mm diameter 6.3mm height 11mm Non-Polar Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +C_Radial_D8.0mm_H7.0mm_P3.50mm +C, Radial series, Radial, pin pitch=3.50mm, diameter=8mm, height=7mm, Non-Polar Electrolytic Capacitor +C Radial series Radial pin pitch 3.50mm diameter 8mm height 7mm Non-Polar Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +C_Radial_D8.0mm_H11.5mm_P3.50mm +C, Radial series, Radial, pin pitch=3.50mm, diameter=8mm, height=11.5mm, Non-Polar Electrolytic Capacitor +C Radial series Radial pin pitch 3.50mm diameter 8mm height 11.5mm Non-Polar Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +C_Radial_D10.0mm_H12.5mm_P5.00mm +C, Radial series, Radial, pin pitch=5.00mm, diameter=10mm, height=12.5mm, Non-Polar Electrolytic Capacitor +C Radial series Radial pin pitch 5.00mm diameter 10mm height 12.5mm Non-Polar Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +C_Radial_D10.0mm_H16.0mm_P5.00mm +C, Radial series, Radial, pin pitch=5.00mm, diameter=10mm, height=16mm, Non-Polar Electrolytic Capacitor +C Radial series Radial pin pitch 5.00mm diameter 10mm height 16mm Non-Polar Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +C_Radial_D10.0mm_H20.0mm_P5.00mm +C, Radial series, Radial, pin pitch=5.00mm, diameter=10mm, height=20mm, Non-Polar Electrolytic Capacitor +C Radial series Radial pin pitch 5.00mm diameter 10mm height 20mm Non-Polar Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +C_Radial_D12.5mm_H20.0mm_P5.00mm +C, Radial series, Radial, pin pitch=5.00mm, diameter=12.5mm, height=20mm, Non-Polar Electrolytic Capacitor +C Radial series Radial pin pitch 5.00mm diameter 12.5mm height 20mm Non-Polar Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +C_Radial_D12.5mm_H25.0mm_P5.00mm +C, Radial series, Radial, pin pitch=5.00mm, diameter=12.5mm, height=25mm, Non-Polar Electrolytic Capacitor +C Radial series Radial pin pitch 5.00mm diameter 12.5mm height 25mm Non-Polar Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +C_Radial_D16.0mm_H25.0mm_P7.50mm +C, Radial series, Radial, pin pitch=7.50mm, diameter=16mm, height=25mm, Non-Polar Electrolytic Capacitor +C Radial series Radial pin pitch 7.50mm diameter 16mm height 25mm Non-Polar Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +C_Radial_D16.0mm_H31.5mm_P7.50mm +C, Radial series, Radial, pin pitch=7.50mm, diameter=16mm, height=31.5mm, Non-Polar Electrolytic Capacitor +C Radial series Radial pin pitch 7.50mm diameter 16mm height 31.5mm Non-Polar Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +C_Radial_D18.0mm_H35.5mm_P7.50mm +C, Radial series, Radial, pin pitch=7.50mm, diameter=18mm, height=35.5mm, Non-Polar Electrolytic Capacitor +C Radial series Radial pin pitch 7.50mm diameter 18mm height 35.5mm Non-Polar Electrolytic Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L4.0mm_W2.5mm_P2.50mm +C, Rect series, Radial, pin pitch=2.50mm, , length*width=4*2.5mm^2, Capacitor +C Rect series Radial pin pitch 2.50mm length 4mm width 2.5mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L4.6mm_W2.0mm_P2.50mm_MKS02_FKP02 +C, Rect series, Radial, pin pitch=2.50mm, , length*width=4.6*2mm^2, Capacitor, http://www.wima.de/DE/WIMA_MKS_02.pdf +C Rect series Radial pin pitch 2.50mm length 4.6mm width 2mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L4.6mm_W3.0mm_P2.50mm_MKS02_FKP02 +C, Rect series, Radial, pin pitch=2.50mm, , length*width=4.6*3.0mm^2, Capacitor, http://www.wima.de/DE/WIMA_MKS_02.pdf +C Rect series Radial pin pitch 2.50mm length 4.6mm width 3.0mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L4.6mm_W3.8mm_P2.50mm_MKS02_FKP02 +C, Rect series, Radial, pin pitch=2.50mm, , length*width=4.6*3.8mm^2, Capacitor, http://www.wima.de/DE/WIMA_MKS_02.pdf +C Rect series Radial pin pitch 2.50mm length 4.6mm width 3.8mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L4.6mm_W4.6mm_P2.50mm_MKS02_FKP02 +C, Rect series, Radial, pin pitch=2.50mm, , length*width=4.6*4.6mm^2, Capacitor, http://www.wima.de/DE/WIMA_MKS_02.pdf +C Rect series Radial pin pitch 2.50mm length 4.6mm width 4.6mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L4.6mm_W5.5mm_P2.50mm_MKS02_FKP02 +C, Rect series, Radial, pin pitch=2.50mm, , length*width=4.6*5.5mm^2, Capacitor, http://www.wima.de/DE/WIMA_MKS_02.pdf +C Rect series Radial pin pitch 2.50mm length 4.6mm width 5.5mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L7.0mm_W2.0mm_P5.00mm +C, Rect series, Radial, pin pitch=5.00mm, , length*width=7*2mm^2, Capacitor +C Rect series Radial pin pitch 5.00mm length 7mm width 2mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L7.0mm_W2.5mm_P5.00mm +C, Rect series, Radial, pin pitch=5.00mm, , length*width=7*2.5mm^2, Capacitor +C Rect series Radial pin pitch 5.00mm length 7mm width 2.5mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L7.0mm_W3.5mm_P2.50mm_P5.00mm +C, Rect series, Radial, pin pitch=2.50mm 5.00mm, , length*width=7*3.5mm^2, Capacitor +C Rect series Radial pin pitch 2.50mm 5.00mm length 7mm width 3.5mm Capacitor +0 +4 +2 +Capacitor_THT +C_Rect_L7.0mm_W3.5mm_P5.00mm +C, Rect series, Radial, pin pitch=5.00mm, , length*width=7*3.5mm^2, Capacitor +C Rect series Radial pin pitch 5.00mm length 7mm width 3.5mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L7.0mm_W4.5mm_P5.00mm +C, Rect series, Radial, pin pitch=5.00mm, , length*width=7*4.5mm^2, Capacitor +C Rect series Radial pin pitch 5.00mm length 7mm width 4.5mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L7.0mm_W6.0mm_P5.00mm +C, Rect series, Radial, pin pitch=5.00mm, , length*width=7*6mm^2, Capacitor +C Rect series Radial pin pitch 5.00mm length 7mm width 6mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L7.0mm_W6.5mm_P5.00mm +C, Rect series, Radial, pin pitch=5.00mm, , length*width=7*6.5mm^2, Capacitor +C Rect series Radial pin pitch 5.00mm length 7mm width 6.5mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L7.2mm_W2.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 +C, Rect series, Radial, pin pitch=5.00mm, , length*width=7.2*2.5mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_2.pdf +C Rect series Radial pin pitch 5.00mm length 7.2mm width 2.5mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L7.2mm_W3.0mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 +C, Rect series, Radial, pin pitch=5.00mm, , length*width=7.2*3.0mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_2.pdf +C Rect series Radial pin pitch 5.00mm length 7.2mm width 3.0mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L7.2mm_W3.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 +C, Rect series, Radial, pin pitch=5.00mm, , length*width=7.2*3.5mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_2.pdf +C Rect series Radial pin pitch 5.00mm length 7.2mm width 3.5mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L7.2mm_W4.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 +C, Rect series, Radial, pin pitch=5.00mm, , length*width=7.2*4.5mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_2.pdf +C Rect series Radial pin pitch 5.00mm length 7.2mm width 4.5mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L7.2mm_W5.5mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 +C, Rect series, Radial, pin pitch=5.00mm, , length*width=7.2*5.5mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_2.pdf +C Rect series Radial pin pitch 5.00mm length 7.2mm width 5.5mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L7.2mm_W7.2mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 +C, Rect series, Radial, pin pitch=5.00mm, , length*width=7.2*7.2mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_2.pdf +C Rect series Radial pin pitch 5.00mm length 7.2mm width 7.2mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L7.2mm_W8.5mm_P5.00mm_FKP2_FKP2_MKS2_MKP2 +C, Rect series, Radial, pin pitch=5.00mm, , length*width=7.2*8.5mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_2.pdf +C Rect series Radial pin pitch 5.00mm length 7.2mm width 8.5mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L7.2mm_W11.0mm_P5.00mm_FKS2_FKP2_MKS2_MKP2 +C, Rect series, Radial, pin pitch=5.00mm, , length*width=7.2*11mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_2.pdf +C Rect series Radial pin pitch 5.00mm length 7.2mm width 11mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L7.5mm_W6.5mm_P5.00mm +C, Rect series, Radial, pin pitch=5.00mm, , length*width=7.5*6.5mm^2, Capacitor +C Rect series Radial pin pitch 5.00mm length 7.5mm width 6.5mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L9.0mm_W2.5mm_P7.50mm_MKT +C, Rect series, Radial, pin pitch=7.50mm, , length*width=9*2.5mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 7.50mm length 9mm width 2.5mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L9.0mm_W2.6mm_P7.50mm_MKT +C, Rect series, Radial, pin pitch=7.50mm, , length*width=9*2.6mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 7.50mm length 9mm width 2.6mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L9.0mm_W2.7mm_P7.50mm_MKT +C, Rect series, Radial, pin pitch=7.50mm, , length*width=9*2.7mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 7.50mm length 9mm width 2.7mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L9.0mm_W3.2mm_P7.50mm_MKT +C, Rect series, Radial, pin pitch=7.50mm, , length*width=9*3.2mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 7.50mm length 9mm width 3.2mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L9.0mm_W3.3mm_P7.50mm_MKT +C, Rect series, Radial, pin pitch=7.50mm, , length*width=9*3.3mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 7.50mm length 9mm width 3.3mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L9.0mm_W3.4mm_P7.50mm_MKT +C, Rect series, Radial, pin pitch=7.50mm, , length*width=9*3.4mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 7.50mm length 9mm width 3.4mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L9.0mm_W3.6mm_P7.50mm_MKT +C, Rect series, Radial, pin pitch=7.50mm, , length*width=9*3.6mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 7.50mm length 9mm width 3.6mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L9.0mm_W3.8mm_P7.50mm_MKT +C, Rect series, Radial, pin pitch=7.50mm, , length*width=9*3.8mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 7.50mm length 9mm width 3.8mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L9.0mm_W3.9mm_P7.50mm_MKT +C, Rect series, Radial, pin pitch=7.50mm, , length*width=9*3.9mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 7.50mm length 9mm width 3.9mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L9.0mm_W4.0mm_P7.50mm_MKT +C, Rect series, Radial, pin pitch=7.50mm, , length*width=9*4.0mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 7.50mm length 9mm width 4.0mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L9.0mm_W4.2mm_P7.50mm_MKT +C, Rect series, Radial, pin pitch=7.50mm, , length*width=9*4.2mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 7.50mm length 9mm width 4.2mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L9.0mm_W4.9mm_P7.50mm_MKT +C, Rect series, Radial, pin pitch=7.50mm, , length*width=9*4.9mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 7.50mm length 9mm width 4.9mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L9.0mm_W5.1mm_P7.50mm_MKT +C, Rect series, Radial, pin pitch=7.50mm, , length*width=9*5.1mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 7.50mm length 9mm width 5.1mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L9.0mm_W5.7mm_P7.50mm_MKT +C, Rect series, Radial, pin pitch=7.50mm, , length*width=9*5.7mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 7.50mm length 9mm width 5.7mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L9.0mm_W6.4mm_P7.50mm_MKT +C, Rect series, Radial, pin pitch=7.50mm, , length*width=9*6.4mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 7.50mm length 9mm width 6.4mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L9.0mm_W6.7mm_P7.50mm_MKT +C, Rect series, Radial, pin pitch=7.50mm, , length*width=9*6.7mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 7.50mm length 9mm width 6.7mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L9.0mm_W7.7mm_P7.50mm_MKT +C, Rect series, Radial, pin pitch=7.50mm, , length*width=9*7.7mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 7.50mm length 9mm width 7.7mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L9.0mm_W8.5mm_P7.50mm_MKT +C, Rect series, Radial, pin pitch=7.50mm, , length*width=9*8.5mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 7.50mm length 9mm width 8.5mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L9.0mm_W9.5mm_P7.50mm_MKT +C, Rect series, Radial, pin pitch=7.50mm, , length*width=9*9.5mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 7.50mm length 9mm width 9.5mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L9.0mm_W9.8mm_P7.50mm_MKT +C, Rect series, Radial, pin pitch=7.50mm, , length*width=9*9.8mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 7.50mm length 9mm width 9.8mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L10.0mm_W2.5mm_P7.50mm_MKS4 +C, Rect series, Radial, pin pitch=7.50mm, , length*width=10*2.5mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 7.50mm length 10mm width 2.5mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L10.0mm_W3.0mm_P7.50mm_FKS3_FKP3 +C, Rect series, Radial, pin pitch=7.50mm, , length*width=10*3mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_3.pdf +C Rect series Radial pin pitch 7.50mm length 10mm width 3mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L10.0mm_W3.0mm_P7.50mm_MKS4 +C, Rect series, Radial, pin pitch=7.50mm, , length*width=10*3.0mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 7.50mm length 10mm width 3.0mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L10.0mm_W4.0mm_P7.50mm_FKS3_FKP3 +C, Rect series, Radial, pin pitch=7.50mm, , length*width=10*4mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_3.pdf +C Rect series Radial pin pitch 7.50mm length 10mm width 4mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L10.0mm_W4.0mm_P7.50mm_MKS4 +C, Rect series, Radial, pin pitch=7.50mm, , length*width=10*4.0mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 7.50mm length 10mm width 4.0mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L10.0mm_W5.0mm_P5.00mm_P7.50mm +C, Rect series, Radial, pin pitch=5.00mm 7.50mm, , length*width=10*5mm^2, Capacitor +C Rect series Radial pin pitch 5.00mm 7.50mm length 10mm width 5mm Capacitor +0 +4 +2 +Capacitor_THT +C_Rect_L10.3mm_W4.5mm_P7.50mm_MKS4 +C, Rect series, Radial, pin pitch=7.50mm, , length*width=10.3*4.5mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 7.50mm length 10.3mm width 4.5mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L10.3mm_W5.0mm_P7.50mm_MKS4 +C, Rect series, Radial, pin pitch=7.50mm, , length*width=10.3*5mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 7.50mm length 10.3mm width 5mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L10.3mm_W5.7mm_P7.50mm_MKS4 +C, Rect series, Radial, pin pitch=7.50mm, , length*width=10.3*5.7mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 7.50mm length 10.3mm width 5.7mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L10.3mm_W7.2mm_P7.50mm_MKS4 +C, Rect series, Radial, pin pitch=7.50mm, , length*width=10.3*7.2mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 7.50mm length 10.3mm width 7.2mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L11.0mm_W2.8mm_P10.00mm_MKT +C, Rect series, Radial, pin pitch=10.00mm, , length*width=11.0*2.8mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 10.00mm length 11.0mm width 2.8mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L11.0mm_W3.4mm_P10.00mm_MKT +C, Rect series, Radial, pin pitch=10.00mm, , length*width=11.0*3.4mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 10.00mm length 11.0mm width 3.4mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L11.0mm_W3.5mm_P10.00mm_MKT +C, Rect series, Radial, pin pitch=10.00mm, , length*width=11.0*3.5mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 10.00mm length 11.0mm width 3.5mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L11.0mm_W4.2mm_P10.00mm_MKT +C, Rect series, Radial, pin pitch=10.00mm, , length*width=11.0*4.2mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 10.00mm length 11.0mm width 4.2mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L11.0mm_W4.3mm_P10.00mm_MKT +C, Rect series, Radial, pin pitch=10.00mm, , length*width=11.0*4.3mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 10.00mm length 11.0mm width 4.3mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L11.0mm_W5.1mm_P10.00mm_MKT +C, Rect series, Radial, pin pitch=10.00mm, , length*width=11.0*5.1mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 10.00mm length 11.0mm width 5.1mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L11.0mm_W5.3mm_P10.00mm_MKT +C, Rect series, Radial, pin pitch=10.00mm, , length*width=11.0*5.3mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 10.00mm length 11.0mm width 5.3mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L11.0mm_W6.3mm_P10.00mm_MKT +C, Rect series, Radial, pin pitch=10.00mm, , length*width=11.0*6.3mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 10.00mm length 11.0mm width 6.3mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L11.0mm_W6.4mm_P10.00mm_MKT +C, Rect series, Radial, pin pitch=10.00mm, , length*width=11.0*6.4mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 10.00mm length 11.0mm width 6.4mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L11.0mm_W7.3mm_P10.00mm_MKT +C, Rect series, Radial, pin pitch=10.00mm, , length*width=11.0*7.3mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 10.00mm length 11.0mm width 7.3mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L11.0mm_W8.8mm_P10.00mm_MKT +C, Rect series, Radial, pin pitch=10.00mm, , length*width=11.0*8.8mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 10.00mm length 11.0mm width 8.8mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L11.5mm_W2.0mm_P10.00mm_MKT +C, Rect series, Radial, pin pitch=10.00mm, , length*width=11.5*2mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 10.00mm length 11.5mm width 2mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L11.5mm_W2.6mm_P10.00mm_MKT +C, Rect series, Radial, pin pitch=10.00mm, , length*width=11.5*2.6mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 10.00mm length 11.5mm width 2.6mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L11.5mm_W2.8mm_P10.00mm_MKT +C, Rect series, Radial, pin pitch=10.00mm, , length*width=11.5*2.8mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 10.00mm length 11.5mm width 2.8mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L11.5mm_W3.2mm_P10.00mm_MKT +C, Rect series, Radial, pin pitch=10.00mm, , length*width=11.5*3.2mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 10.00mm length 11.5mm width 3.2mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L11.5mm_W3.5mm_P10.00mm_MKT +C, Rect series, Radial, pin pitch=10.00mm, , length*width=11.5*3.5mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 10.00mm length 11.5mm width 3.5mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L11.5mm_W3.6mm_P10.00mm_MKT +C, Rect series, Radial, pin pitch=10.00mm, , length*width=11.5*3.6mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 10.00mm length 11.5mm width 3.6mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L11.5mm_W4.0mm_P10.00mm_MKT +C, Rect series, Radial, pin pitch=10.00mm, , length*width=11.5*4.0mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 10.00mm length 11.5mm width 4.0mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L11.5mm_W4.3mm_P10.00mm_MKT +C, Rect series, Radial, pin pitch=10.00mm, , length*width=11.5*4.3mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 10.00mm length 11.5mm width 4.3mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L11.5mm_W4.5mm_P10.00mm_MKT +C, Rect series, Radial, pin pitch=10.00mm, , length*width=11.5*4.5mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 10.00mm length 11.5mm width 4.5mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L11.5mm_W5.0mm_P10.00mm_MKT +C, Rect series, Radial, pin pitch=10.00mm, , length*width=11.5*5mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 10.00mm length 11.5mm width 5mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L11.5mm_W5.1mm_P10.00mm_MKT +C, Rect series, Radial, pin pitch=10.00mm, , length*width=11.5*5.1mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 10.00mm length 11.5mm width 5.1mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L11.5mm_W5.2mm_P10.00mm_MKT +C, Rect series, Radial, pin pitch=10.00mm, , length*width=11.5*5.2mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 10.00mm length 11.5mm width 5.2mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L11.5mm_W5.6mm_P10.00mm_MKT +C, Rect series, Radial, pin pitch=10.00mm, , length*width=11.5*5.6mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 10.00mm length 11.5mm width 5.6mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L11.5mm_W6.4mm_P10.00mm_MKT +C, Rect series, Radial, pin pitch=10.00mm, , length*width=11.5*6.4mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 10.00mm length 11.5mm width 6.4mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L11.5mm_W6.6mm_P10.00mm_MKT +C, Rect series, Radial, pin pitch=10.00mm, , length*width=11.5*6.6mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 10.00mm length 11.5mm width 6.6mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L11.5mm_W6.9mm_P10.00mm_MKT +C, Rect series, Radial, pin pitch=10.00mm, , length*width=11.5*6.9mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 10.00mm length 11.5mm width 6.9mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L11.5mm_W7.3mm_P10.00mm_MKT +C, Rect series, Radial, pin pitch=10.00mm, , length*width=11.5*7.3mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 10.00mm length 11.5mm width 7.3mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L11.5mm_W7.5mm_P10.00mm_MKT +C, Rect series, Radial, pin pitch=10.00mm, , length*width=11.5*7.5mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 10.00mm length 11.5mm width 7.5mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L11.5mm_W7.8mm_P10.00mm_MKT +C, Rect series, Radial, pin pitch=10.00mm, , length*width=11.5*7.8mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 10.00mm length 11.5mm width 7.8mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L11.5mm_W8.0mm_P10.00mm_MKT +C, Rect series, Radial, pin pitch=10.00mm, , length*width=11.5*8.0mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 10.00mm length 11.5mm width 8.0mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L11.5mm_W8.8mm_P10.00mm_MKT +C, Rect series, Radial, pin pitch=10.00mm, , length*width=11.5*8.8mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 10.00mm length 11.5mm width 8.8mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L11.5mm_W9.5mm_P10.00mm_MKT +C, Rect series, Radial, pin pitch=10.00mm, , length*width=11.5*9.5mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 10.00mm length 11.5mm width 9.5mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L11.5mm_W9.8mm_P10.00mm_MKT +C, Rect series, Radial, pin pitch=10.00mm, , length*width=11.5*9.8mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 10.00mm length 11.5mm width 9.8mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L13.0mm_W3.0mm_P10.00mm_FKS3_FKP3_MKS4 +C, Rect series, Radial, pin pitch=10.00mm, , length*width=13*3mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_3.pdf, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 10.00mm length 13mm width 3mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L13.0mm_W4.0mm_P10.00mm_FKS3_FKP3_MKS4 +C, Rect series, Radial, pin pitch=10.00mm, , length*width=13*4mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_3.pdf, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 10.00mm length 13mm width 4mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L13.0mm_W5.0mm_P10.00mm_FKS3_FKP3_MKS4 +C, Rect series, Radial, pin pitch=10.00mm, , length*width=13*5mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_3.pdf, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 10.00mm length 13mm width 5mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L13.0mm_W6.0mm_P10.00mm_FKS3_FKP3_MKS4 +C, Rect series, Radial, pin pitch=10.00mm, , length*width=13*6mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_3.pdf, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 10.00mm length 13mm width 6mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L13.0mm_W6.5mm_P7.50mm_P10.00mm +C, Rect series, Radial, pin pitch=7.50mm 10.00mm, , length*width=13*6.5mm^2, Capacitor +C Rect series Radial pin pitch 7.50mm 10.00mm length 13mm width 6.5mm Capacitor +0 +4 +2 +Capacitor_THT +C_Rect_L13.0mm_W8.0mm_P10.00mm_FKS3_FKP3_MKS4 +C, Rect series, Radial, pin pitch=10.00mm, , length*width=13*8mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_3.pdf, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 10.00mm length 13mm width 8mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L13.5mm_W4.0mm_P10.00mm_FKS3_FKP3_MKS4 +C, Rect series, Radial, pin pitch=10.00mm, , length*width=13.5*4mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_3.pdf, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 10.00mm length 13.5mm width 4mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L13.5mm_W5.0mm_P10.00mm_FKS3_FKP3_MKS4 +C, Rect series, Radial, pin pitch=10.00mm, , length*width=13.5*5mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_3.pdf, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 10.00mm length 13.5mm width 5mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L16.5mm_W4.7mm_P15.00mm_MKT +C, Rect series, Radial, pin pitch=15.00mm, , length*width=16.5*4.7mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 15.00mm length 16.5mm width 4.7mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L16.5mm_W4.9mm_P15.00mm_MKT +C, Rect series, Radial, pin pitch=15.00mm, , length*width=16.5*4.9mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 15.00mm length 16.5mm width 4.9mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L16.5mm_W5.0mm_P15.00mm_MKT +C, Rect series, Radial, pin pitch=15.00mm, , length*width=16.5*5mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 15.00mm length 16.5mm width 5mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L16.5mm_W6.0mm_P15.00mm_MKT +C, Rect series, Radial, pin pitch=15.00mm, , length*width=16.5*6mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 15.00mm length 16.5mm width 6mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L16.5mm_W7.0mm_P15.00mm_MKT +C, Rect series, Radial, pin pitch=15.00mm, , length*width=16.5*7mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 15.00mm length 16.5mm width 7mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L16.5mm_W7.3mm_P15.00mm_MKT +C, Rect series, Radial, pin pitch=15.00mm, , length*width=16.5*7.3mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 15.00mm length 16.5mm width 7.3mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L16.5mm_W8.7mm_P15.00mm_MKT +C, Rect series, Radial, pin pitch=15.00mm, , length*width=16.5*8.7mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 15.00mm length 16.5mm width 8.7mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L16.5mm_W8.9mm_P15.00mm_MKT +C, Rect series, Radial, pin pitch=15.00mm, , length*width=16.5*8.9mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 15.00mm length 16.5mm width 8.9mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L16.5mm_W9.0mm_P15.00mm_MKT +C, Rect series, Radial, pin pitch=15.00mm, , length*width=16.5*9mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 15.00mm length 16.5mm width 9mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L16.5mm_W9.2mm_P15.00mm_MKT +C, Rect series, Radial, pin pitch=15.00mm, , length*width=16.5*9.2mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 15.00mm length 16.5mm width 9.2mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L16.5mm_W10.7mm_P15.00mm_MKT +C, Rect series, Radial, pin pitch=15.00mm, , length*width=16.5*10.7mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 15.00mm length 16.5mm width 10.7mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L16.5mm_W10.9mm_P15.00mm_MKT +C, Rect series, Radial, pin pitch=15.00mm, , length*width=16.5*10.9mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 15.00mm length 16.5mm width 10.9mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L16.5mm_W11.2mm_P15.00mm_MKT +C, Rect series, Radial, pin pitch=15.00mm, , length*width=16.5*11.2mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 15.00mm length 16.5mm width 11.2mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L16.5mm_W11.8mm_P15.00mm_MKT +C, Rect series, Radial, pin pitch=15.00mm, , length*width=16.5*11.8mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 15.00mm length 16.5mm width 11.8mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L16.5mm_W13.5mm_P15.00mm_MKT +C, Rect series, Radial, pin pitch=15.00mm, , length*width=16.5*13.5mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 15.00mm length 16.5mm width 13.5mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L16.5mm_W13.7mm_P15.00mm_MKT +C, Rect series, Radial, pin pitch=15.00mm, , length*width=16.5*13.7mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 15.00mm length 16.5mm width 13.7mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L16.5mm_W13.9mm_P15.00mm_MKT +C, Rect series, Radial, pin pitch=15.00mm, , length*width=16.5*13.9mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 15.00mm length 16.5mm width 13.9mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L18.0mm_W5.0mm_P15.00mm_FKS3_FKP3 +C, Rect series, Radial, pin pitch=15.00mm, , length*width=18*5mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_3.pdf +C Rect series Radial pin pitch 15.00mm length 18mm width 5mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L18.0mm_W6.0mm_P15.00mm_FKS3_FKP3 +C, Rect series, Radial, pin pitch=15.00mm, , length*width=18*6mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_3.pdf +C Rect series Radial pin pitch 15.00mm length 18mm width 6mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L18.0mm_W7.0mm_P15.00mm_FKS3_FKP3 +C, Rect series, Radial, pin pitch=15.00mm, , length*width=18*7mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_3.pdf +C Rect series Radial pin pitch 15.00mm length 18mm width 7mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L18.0mm_W8.0mm_P15.00mm_FKS3_FKP3 +C, Rect series, Radial, pin pitch=15.00mm, , length*width=18*8mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_3.pdf +C Rect series Radial pin pitch 15.00mm length 18mm width 8mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L18.0mm_W9.0mm_P15.00mm_FKS3_FKP3 +C, Rect series, Radial, pin pitch=15.00mm, , length*width=18*9mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_3.pdf +C Rect series Radial pin pitch 15.00mm length 18mm width 9mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L18.0mm_W11.0mm_P15.00mm_FKS3_FKP3 +C, Rect series, Radial, pin pitch=15.00mm, , length*width=18*11mm^2, Capacitor, http://www.wima.com/EN/WIMA_FKS_3.pdf +C Rect series Radial pin pitch 15.00mm length 18mm width 11mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L19.0mm_W5.0mm_P15.00mm_MKS4 +C, Rect series, Radial, pin pitch=15.00mm, , length*width=19*5mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 15.00mm length 19mm width 5mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L19.0mm_W6.0mm_P15.00mm_MKS4 +C, Rect series, Radial, pin pitch=15.00mm, , length*width=19*6mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 15.00mm length 19mm width 6mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L19.0mm_W7.0mm_P15.00mm_MKS4 +C, Rect series, Radial, pin pitch=15.00mm, , length*width=19*7mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 15.00mm length 19mm width 7mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L19.0mm_W8.0mm_P15.00mm_MKS4 +C, Rect series, Radial, pin pitch=15.00mm, , length*width=19*8mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 15.00mm length 19mm width 8mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L19.0mm_W9.0mm_P15.00mm_MKS4 +C, Rect series, Radial, pin pitch=15.00mm, , length*width=19*9mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 15.00mm length 19mm width 9mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L19.0mm_W11.0mm_P15.00mm_MKS4 +C, Rect series, Radial, pin pitch=15.00mm, , length*width=19*11mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 15.00mm length 19mm width 11mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L24.0mm_W7.0mm_P22.50mm_MKT +C, Rect series, Radial, pin pitch=22.50mm, , length*width=24*7mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 22.50mm length 24mm width 7mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L24.0mm_W8.3mm_P22.50mm_MKT +C, Rect series, Radial, pin pitch=22.50mm, , length*width=24*8.3mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 22.50mm length 24mm width 8.3mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L24.0mm_W8.6mm_P22.50mm_MKT +C, Rect series, Radial, pin pitch=22.50mm, , length*width=24*8.6mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 22.50mm length 24mm width 8.6mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L24.0mm_W10.1mm_P22.50mm_MKT +C, Rect series, Radial, pin pitch=22.50mm, , length*width=24*10.1mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 22.50mm length 24mm width 10.1mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L24.0mm_W10.3mm_P22.50mm_MKT +C, Rect series, Radial, pin pitch=22.50mm, , length*width=24*10.3mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 22.50mm length 24mm width 10.3mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L24.0mm_W10.9mm_P22.50mm_MKT +C, Rect series, Radial, pin pitch=22.50mm, , length*width=24*10.9mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 22.50mm length 24mm width 10.9mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L24.0mm_W12.2mm_P22.50mm_MKT +C, Rect series, Radial, pin pitch=22.50mm, , length*width=24*12.2mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 22.50mm length 24mm width 12.2mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L24.0mm_W12.6mm_P22.50mm_MKT +C, Rect series, Radial, pin pitch=22.50mm, , length*width=24*12.6mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 22.50mm length 24mm width 12.6mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L24.0mm_W12.8mm_P22.50mm_MKT +C, Rect series, Radial, pin pitch=22.50mm, , length*width=24*12.8mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 22.50mm length 24mm width 12.8mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L26.5mm_W5.0mm_P22.50mm_MKS4 +C, Rect series, Radial, pin pitch=22.50mm, , length*width=26.5*5mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 22.50mm length 26.5mm width 5mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L26.5mm_W6.0mm_P22.50mm_MKS4 +C, Rect series, Radial, pin pitch=22.50mm, , length*width=26.5*6mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 22.50mm length 26.5mm width 6mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L26.5mm_W7.0mm_P22.50mm_MKS4 +C, Rect series, Radial, pin pitch=22.50mm, , length*width=26.5*7mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 22.50mm length 26.5mm width 7mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L26.5mm_W8.5mm_P22.50mm_MKS4 +C, Rect series, Radial, pin pitch=22.50mm, , length*width=26.5*8.5mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 22.50mm length 26.5mm width 8.5mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L26.5mm_W10.5mm_P22.50mm_MKS4 +C, Rect series, Radial, pin pitch=22.50mm, , length*width=26.5*10.5mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 22.50mm length 26.5mm width 10.5mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L26.5mm_W11.5mm_P22.50mm_MKS4 +C, Rect series, Radial, pin pitch=22.50mm, , length*width=26.5*11.5mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 22.50mm length 26.5mm width 11.5mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L27.0mm_W9.0mm_P22.00mm +C, Rect series, Radial, pin pitch=22.00mm, , length*width=27*9mm^2, Capacitor +C Rect series Radial pin pitch 22.00mm length 27mm width 9mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L27.0mm_W9.0mm_P23.00mm +C, Rect series, Radial, pin pitch=23.00mm, , length*width=27*9mm^2, Capacitor +C Rect series Radial pin pitch 23.00mm length 27mm width 9mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L27.0mm_W11.0mm_P22.00mm +C, Rect series, Radial, pin pitch=22.00mm, , length*width=27*11mm^2, Capacitor +C Rect series Radial pin pitch 22.00mm length 27mm width 11mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L28.0mm_W8.0mm_P22.50mm_MKS4 +C, Rect series, Radial, pin pitch=22.50mm, , length*width=28*8mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 22.50mm length 28mm width 8mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L28.0mm_W10.0mm_P22.50mm_MKS4 +C, Rect series, Radial, pin pitch=22.50mm, , length*width=28*10mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 22.50mm length 28mm width 10mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L28.0mm_W12.0mm_P22.50mm_MKS4 +C, Rect series, Radial, pin pitch=22.50mm, , length*width=28*12mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 22.50mm length 28mm width 12mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L29.0mm_W7.6mm_P27.50mm_MKT +C, Rect series, Radial, pin pitch=27.50mm, , length*width=29*7.6mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 27.50mm length 29mm width 7.6mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L29.0mm_W7.8mm_P27.50mm_MKT +C, Rect series, Radial, pin pitch=27.50mm, , length*width=29*7.8mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 27.50mm length 29mm width 7.8mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L29.0mm_W7.9mm_P27.50mm_MKT +C, Rect series, Radial, pin pitch=27.50mm, , length*width=29*7.9mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 27.50mm length 29mm width 7.9mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L29.0mm_W9.1mm_P27.50mm_MKT +C, Rect series, Radial, pin pitch=27.50mm, , length*width=29*9.1mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 27.50mm length 29mm width 9.1mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L29.0mm_W9.6mm_P27.50mm_MKT +C, Rect series, Radial, pin pitch=27.50mm, , length*width=29*9.6mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 27.50mm length 29mm width 9.6mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L29.0mm_W11.0mm_P27.50mm_MKT +C, Rect series, Radial, pin pitch=27.50mm, , length*width=29*11mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 27.50mm length 29mm width 11mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L29.0mm_W11.9mm_P27.50mm_MKT +C, Rect series, Radial, pin pitch=27.50mm, , length*width=29*11.9mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 27.50mm length 29mm width 11.9mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L29.0mm_W12.2mm_P27.50mm_MKT +C, Rect series, Radial, pin pitch=27.50mm, , length*width=29*12.2mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 27.50mm length 29mm width 12.2mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L29.0mm_W13.0mm_P27.50mm_MKT +C, Rect series, Radial, pin pitch=27.50mm, , length*width=29*13mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 27.50mm length 29mm width 13mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L29.0mm_W13.8mm_P27.50mm_MKT +C, Rect series, Radial, pin pitch=27.50mm, , length*width=29*13.8mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 27.50mm length 29mm width 13.8mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L29.0mm_W14.2mm_P27.50mm_MKT +C, Rect series, Radial, pin pitch=27.50mm, , length*width=29*14.2mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 27.50mm length 29mm width 14.2mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L29.0mm_W16.0mm_P27.50mm_MKT +C, Rect series, Radial, pin pitch=27.50mm, , length*width=29*16mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf +C Rect series Radial pin pitch 27.50mm length 29mm width 16mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L31.5mm_W9.0mm_P27.50mm_MKS4 +C, Rect series, Radial, pin pitch=27.50mm, , length*width=31.5*9mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 27.50mm length 31.5mm width 9mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L31.5mm_W11.0mm_P27.50mm_MKS4 +C, Rect series, Radial, pin pitch=27.50mm, , length*width=31.5*11mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 27.50mm length 31.5mm width 11mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L31.5mm_W13.0mm_P27.50mm_MKS4 +C, Rect series, Radial, pin pitch=27.50mm, , length*width=31.5*13mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 27.50mm length 31.5mm width 13mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L31.5mm_W15.0mm_P27.50mm_MKS4 +C, Rect series, Radial, pin pitch=27.50mm, , length*width=31.5*15mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 27.50mm length 31.5mm width 15mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L31.5mm_W17.0mm_P27.50mm_MKS4 +C, Rect series, Radial, pin pitch=27.50mm, , length*width=31.5*17mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 27.50mm length 31.5mm width 17mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L31.5mm_W20.0mm_P27.50mm_MKS4 +C, Rect series, Radial, pin pitch=27.50mm, , length*width=31.5*20mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 27.50mm length 31.5mm width 20mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L32.0mm_W15.0mm_P27.00mm +C, Rect series, Radial, pin pitch=27.00mm, , length*width=32*15mm^2, Capacitor +C Rect series Radial pin pitch 27.00mm length 32mm width 15mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L33.0mm_W13.0mm_P27.50mm_MKS4 +C, Rect series, Radial, pin pitch=27.50mm, , length*width=33*13mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 27.50mm length 33mm width 13mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L33.0mm_W15.0mm_P27.50mm_MKS4 +C, Rect series, Radial, pin pitch=27.50mm, , length*width=33*15mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 27.50mm length 33mm width 15mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L33.0mm_W20.0mm_P27.50mm_MKS4 +C, Rect series, Radial, pin pitch=27.50mm, , length*width=33*20mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 27.50mm length 33mm width 20mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L41.5mm_W9.0mm_P37.50mm_MKS4 +C, Rect series, Radial, pin pitch=37.50mm, , length*width=41.5*9mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 37.50mm length 41.5mm width 9mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L41.5mm_W11.0mm_P37.50mm_MKS4 +C, Rect series, Radial, pin pitch=37.50mm, , length*width=41.5*11mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 37.50mm length 41.5mm width 11mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L41.5mm_W13.0mm_P37.50mm_MKS4 +C, Rect series, Radial, pin pitch=37.50mm, , length*width=41.5*13mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 37.50mm length 41.5mm width 13mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L41.5mm_W15.0mm_P37.50mm_MKS4 +C, Rect series, Radial, pin pitch=37.50mm, , length*width=41.5*15mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 37.50mm length 41.5mm width 15mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L41.5mm_W17.0mm_P37.50mm_MKS4 +C, Rect series, Radial, pin pitch=37.50mm, , length*width=41.5*17mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 37.50mm length 41.5mm width 17mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L41.5mm_W19.0mm_P37.50mm_MKS4 +C, Rect series, Radial, pin pitch=37.50mm, , length*width=41.5*19mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 37.50mm length 41.5mm width 19mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L41.5mm_W20.0mm_P37.50mm_MKS4 +C, Rect series, Radial, pin pitch=37.50mm, , length*width=41.5*20mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 37.50mm length 41.5mm width 20mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L41.5mm_W24.0mm_P37.50mm_MKS4 +C, Rect series, Radial, pin pitch=37.50mm, , length*width=41.5*24mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 37.50mm length 41.5mm width 24mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L41.5mm_W31.0mm_P37.50mm_MKS4 +C, Rect series, Radial, pin pitch=37.50mm, , length*width=41.5*31mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 37.50mm length 41.5mm width 31mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L41.5mm_W35.0mm_P37.50mm_MKS4 +C, Rect series, Radial, pin pitch=37.50mm, , length*width=41.5*35mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 37.50mm length 41.5mm width 35mm Capacitor +0 +2 +2 +Capacitor_THT +C_Rect_L41.5mm_W40.0mm_P37.50mm_MKS4 +C, Rect series, Radial, pin pitch=37.50mm, , length*width=41.5*40mm^2, Capacitor, http://www.wima.com/EN/WIMA_MKS_4.pdf +C Rect series Radial pin pitch 37.50mm length 41.5mm width 40mm Capacitor +0 +2 +2 +Capacitor_THT +DX_5R5HxxxxU_D11.5mm_P10.00mm +CP, Radial series, Radial, pin pitch=10.00mm, diameter=11.5mm, Supercapacitor, http://www.elna.co.jp/en/capacitor/double_layer/catalog/pdf/dx_e.pdf +CP Radial series Radial pin pitch 10.00mm diameter 11.5mm supercapacitor +0 +2 +2 +Capacitor_THT +DX_5R5VxxxxU_D11.5mm_P5.00mm +CP, Radial series, Radial, pin pitch=5.00mm, diameter=11.5mm, Supercapacitor, http://www.elna.co.jp/en/capacitor/double_layer/catalog/pdf/dx_e.pdf +CP Radial series Radial pin pitch 5.00mm diameter 11.5mm supercapacitor +0 +2 +2 +Capacitor_THT +DX_5R5VxxxxU_D19.0mm_P5.00mm +CP, Radial series, Radial, pin pitch=5.00mm, diameter=19mm, Supercapacitor, http://www.elna.co.jp/en/capacitor/double_layer/catalog/pdf/dx_e.pdf +CP Radial series Radial pin pitch 5.00mm diameter 19mm supercapacitor +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-1608-08_AVX-J +Tantalum Capacitor SMD AVX-J (1608-08 Metric), IPC_7351 nominal, (Body size from: https://www.vishay.com/docs/48064/_t58_vmn_pt0471_1601.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-1608-08_AVX-J_Pad1.25x1.05mm_HandSolder +Tantalum Capacitor SMD AVX-J (1608-08 Metric), IPC_7351 nominal, (Body size from: https://www.vishay.com/docs/48064/_t58_vmn_pt0471_1601.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-1608-10_AVX-L +Tantalum Capacitor SMD AVX-L (1608-10 Metric), IPC_7351 nominal, (Body size from: https://www.vishay.com/docs/48064/_t58_vmn_pt0471_1601.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-1608-10_AVX-L_Pad1.25x1.05mm_HandSolder +Tantalum Capacitor SMD AVX-L (1608-10 Metric), IPC_7351 nominal, (Body size from: https://www.vishay.com/docs/48064/_t58_vmn_pt0471_1601.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-2012-12_Kemet-R +Tantalum Capacitor SMD Kemet-R (2012-12 Metric), IPC_7351 nominal, (Body size from: https://www.vishay.com/docs/40182/tmch.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-2012-12_Kemet-R_Pad1.30x1.05mm_HandSolder +Tantalum Capacitor SMD Kemet-R (2012-12 Metric), IPC_7351 nominal, (Body size from: https://www.vishay.com/docs/40182/tmch.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-2012-15_AVX-P +Tantalum Capacitor SMD AVX-P (2012-15 Metric), IPC_7351 nominal, (Body size from: https://www.vishay.com/docs/40182/tmch.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-2012-15_AVX-P_Pad1.30x1.05mm_HandSolder +Tantalum Capacitor SMD AVX-P (2012-15 Metric), IPC_7351 nominal, (Body size from: https://www.vishay.com/docs/40182/tmch.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-3216-10_Kemet-I +Tantalum Capacitor SMD Kemet-I (3216-10 Metric), IPC_7351 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-3216-10_Kemet-I_Pad1.58x1.35mm_HandSolder +Tantalum Capacitor SMD Kemet-I (3216-10 Metric), IPC_7351 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-3216-12_Kemet-S +Tantalum Capacitor SMD Kemet-S (3216-12 Metric), IPC_7351 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-3216-12_Kemet-S_Pad1.58x1.35mm_HandSolder +Tantalum Capacitor SMD Kemet-S (3216-12 Metric), IPC_7351 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-3216-18_Kemet-A +Tantalum Capacitor SMD Kemet-A (3216-18 Metric), IPC_7351 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-3216-18_Kemet-A_Pad1.58x1.35mm_HandSolder +Tantalum Capacitor SMD Kemet-A (3216-18 Metric), IPC_7351 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-3528-12_Kemet-T +Tantalum Capacitor SMD Kemet-T (3528-12 Metric), IPC_7351 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-3528-12_Kemet-T_Pad1.50x2.35mm_HandSolder +Tantalum Capacitor SMD Kemet-T (3528-12 Metric), IPC_7351 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-3528-15_AVX-H +Tantalum Capacitor SMD AVX-H (3528-15 Metric), IPC_7351 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-3528-15_AVX-H_Pad1.50x2.35mm_HandSolder +Tantalum Capacitor SMD AVX-H (3528-15 Metric), IPC_7351 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-3528-21_Kemet-B +Tantalum Capacitor SMD Kemet-B (3528-21 Metric), IPC_7351 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-3528-21_Kemet-B_Pad1.50x2.35mm_HandSolder +Tantalum Capacitor SMD Kemet-B (3528-21 Metric), IPC_7351 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-6032-15_Kemet-U +Tantalum Capacitor SMD Kemet-U (6032-15 Metric), IPC_7351 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-6032-15_Kemet-U_Pad2.25x2.35mm_HandSolder +Tantalum Capacitor SMD Kemet-U (6032-15 Metric), IPC_7351 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-6032-20_AVX-F +Tantalum Capacitor SMD AVX-F (6032-20 Metric), IPC_7351 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-6032-20_AVX-F_Pad2.25x2.35mm_HandSolder +Tantalum Capacitor SMD AVX-F (6032-20 Metric), IPC_7351 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-6032-28_Kemet-C +Tantalum Capacitor SMD Kemet-C (6032-28 Metric), IPC_7351 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-6032-28_Kemet-C_Pad2.25x2.35mm_HandSolder +Tantalum Capacitor SMD Kemet-C (6032-28 Metric), IPC_7351 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-7132-20_AVX-U +Tantalum Capacitor SMD AVX-U (7132-20 Metric), IPC_7351 nominal, (Body size from: http://datasheets.avx.com/F72-F75.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-7132-20_AVX-U_Pad2.72x3.50mm_HandSolder +Tantalum Capacitor SMD AVX-U (7132-20 Metric), IPC_7351 nominal, (Body size from: http://datasheets.avx.com/F72-F75.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-7132-28_AVX-C +Tantalum Capacitor SMD AVX-C (7132-28 Metric), IPC_7351 nominal, (Body size from: http://datasheets.avx.com/F72-F75.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-7132-28_AVX-C_Pad2.72x3.50mm_HandSolder +Tantalum Capacitor SMD AVX-C (7132-28 Metric), IPC_7351 nominal, (Body size from: http://datasheets.avx.com/F72-F75.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-7260-15_AVX-R +Tantalum Capacitor SMD AVX-R (7260-15 Metric), IPC_7351 nominal, (Body size from: http://datasheets.avx.com/F72-F75.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-7260-15_AVX-R_Pad2.68x6.30mm_HandSolder +Tantalum Capacitor SMD AVX-R (7260-15 Metric), IPC_7351 nominal, (Body size from: http://datasheets.avx.com/F72-F75.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-7260-20_AVX-M +Tantalum Capacitor SMD AVX-M (7260-20 Metric), IPC_7351 nominal, (Body size from: http://datasheets.avx.com/F72-F75.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-7260-20_AVX-M_Pad2.68x6.30mm_HandSolder +Tantalum Capacitor SMD AVX-M (7260-20 Metric), IPC_7351 nominal, (Body size from: http://datasheets.avx.com/F72-F75.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-7260-28_AVX-M +Tantalum Capacitor SMD AVX-M (7260-28 Metric), IPC_7351 nominal, (Body size from: http://datasheets.avx.com/F72-F75.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-7260-28_AVX-M_Pad2.68x6.30mm_HandSolder +Tantalum Capacitor SMD AVX-M (7260-28 Metric), IPC_7351 nominal, (Body size from: http://datasheets.avx.com/F72-F75.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-7260-38_AVX-R +Tantalum Capacitor SMD AVX-R (7260-38 Metric), IPC_7351 nominal, (Body size from: http://datasheets.avx.com/F72-F75.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-7260-38_AVX-R_Pad2.68x6.30mm_HandSolder +Tantalum Capacitor SMD AVX-R (7260-38 Metric), IPC_7351 nominal, (Body size from: http://datasheets.avx.com/F72-F75.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-7343-15_Kemet-W +Tantalum Capacitor SMD Kemet-W (7343-15 Metric), IPC_7351 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-7343-15_Kemet-W_Pad2.25x2.55mm_HandSolder +Tantalum Capacitor SMD Kemet-W (7343-15 Metric), IPC_7351 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-7343-20_Kemet-V +Tantalum Capacitor SMD Kemet-V (7343-20 Metric), IPC_7351 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-7343-20_Kemet-V_Pad2.25x2.55mm_HandSolder +Tantalum Capacitor SMD Kemet-V (7343-20 Metric), IPC_7351 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-7343-30_AVX-N +Tantalum Capacitor SMD AVX-N (7343-30 Metric), IPC_7351 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-7343-30_AVX-N_Pad2.25x2.55mm_HandSolder +Tantalum Capacitor SMD AVX-N (7343-30 Metric), IPC_7351 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-7343-31_Kemet-D +Tantalum Capacitor SMD Kemet-D (7343-31 Metric), IPC_7351 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-7343-31_Kemet-D_Pad2.25x2.55mm_HandSolder +Tantalum Capacitor SMD Kemet-D (7343-31 Metric), IPC_7351 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-7343-40_Kemet-Y +Tantalum Capacitor SMD Kemet-Y (7343-40 Metric), IPC_7351 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-7343-40_Kemet-Y_Pad2.25x2.55mm_HandSolder +Tantalum Capacitor SMD Kemet-Y (7343-40 Metric), IPC_7351 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-7343-43_Kemet-X +Tantalum Capacitor SMD Kemet-X (7343-43 Metric), IPC_7351 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-7343-43_Kemet-X_Pad2.25x2.55mm_HandSolder +Tantalum Capacitor SMD Kemet-X (7343-43 Metric), IPC_7351 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-7360-38_Kemet-E +Tantalum Capacitor SMD Kemet-E (7360-38 Metric), IPC_7351 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-7360-38_Kemet-E_Pad2.25x4.25mm_HandSolder +Tantalum Capacitor SMD Kemet-E (7360-38 Metric), IPC_7351 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-7361-38_AVX-V +Tantalum Capacitor SMD AVX-V (7361-38 Metric), IPC_7351 nominal, (Body size from: http://datasheets.avx.com/NOS.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-7361-38_AVX-V_Pad2.18x3.30mm_HandSolder +Tantalum Capacitor SMD AVX-V (7361-38 Metric), IPC_7351 nominal, (Body size from: http://datasheets.avx.com/NOS.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-7361-438_AVX-U +Tantalum Capacitor SMD AVX-U (7361-438 Metric), IPC_7351 nominal, (Body size from: http://datasheets.avx.com/NOS.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Capacitor_Tantalum_SMD +CP_EIA-7361-438_AVX-U_Pad2.18x3.30mm_HandSolder +Tantalum Capacitor SMD AVX-U (7361-438 Metric), IPC_7351 nominal, (Body size from: http://datasheets.avx.com/NOS.pdf), generated with kicad-footprint-generator +capacitor tantalum +0 +2 +2 +Connector +Banana_Cliff_FCR7350x_S16N-PC_Horizontal +Cliff single 4mm shrouded banana panel socket, through-hole, horizontal, https://www.cliffuk.co.uk/products/testleads/sockets/S16NPC.pdf +cliff 4mm socket jack banana +0 +1 +1 +Connector +Banana_Jack_1Pin +Single banana socket, footprint - 6mm drill +banana socket +0 +1 +1 +Connector +Banana_Jack_2Pin +Dual banana socket, footprint - 2 x 6mm drills +banana socket +0 +2 +2 +Connector +Banana_Jack_3Pin +Triple banana socket, footprint - 3 x 6mm drills +banana socket +0 +3 +3 +Connector +CUI_PD-30 +3 pin connector, PD-30, http://www.cui.com/product/resource/pd-30.pdf +connector 3-pin PD-30 power DIN +0 +4 +4 +Connector +CUI_PD-30S +3-pin nonstandard DIN connector, shielded, PD-30S, http://www.cui.com/product/resource/pd-30s.pdf +connector 3-pin PD-30S power DIN shielded +0 +8 +5 +Connector +CUI_PD-30S_CircularHoles +3-pin nonstandard DIN connector, shielded, PD-30S, http://www.cui.com/product/resource/pd-30s.pdf +connector 3-pin PD-30S power DIN shielded +0 +8 +5 +Connector +CalTest_CT3151 +Right-angle standard banana jack, http://www.caltestelectronics.com/images/attachments/P315100rH_drawing.pdf +banana jack horizontal +0 +4 +1 +Connector +Connector_SFP_and_Cage +https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=2227302&DocType=Customer+Drawing&DocLang=English +SFP+ SFP +0 +40 +21 +Connector +DTF13-12Px +http://www.te.com/usa-en/product-DTF13-12PA-G003.html +DEUTSCH DT header 12 pin +0 +12 +12 +Connector +FanPinHeader_1x03_P2.54mm_Vertical +3-pin CPU fan Through hole pin header, see http://www.formfactors.org/developer%5Cspecs%5Crev1_2_public.pdf +pin header 3-pin CPU fan +0 +3 +3 +Connector +FanPinHeader_1x04_P2.54mm_Vertical +4-pin CPU fan Through hole pin header, e.g. for Wieson part number 2366C888-007 Molex 47053-1000, Foxconn HF27040-M1, Tyco 1470947-1 or equivalent, see http://www.formfactors.org/developer%5Cspecs%5Crev1_2_public.pdf +pin header 4-pin CPU fan +0 +4 +4 +Connector +GB042-34S-H10 +http://www.lsmtron.com/pdf/Connector&Antenna_catalog.PDF +34pin SMD connector +0 +34 +34 +Connector +IHI_B6A-PCB-45_Vertical +https://lugsdirect.com/PDF_Webprint/B6A-PCB-45-XX(-X).pdf +connector IHI B6A-PCB-45 +0 +49 +1 +Connector +JWT_A3963_1x02_P3.96mm_Vertical +JWT A3963, 3.96mm pitch Pin head connector (http://www.jwt.com.tw/pro_pdf/A3963.pdf) +connector JWT A3963 pinhead +0 +2 +2 +Connector +Joint-Tech_C5080WR-04P_1x04_P5.08mm_Vertical +C5080 SERIES 90° Wafer, (https://datasheet.lcsc.com/lcsc/1912261836_HR-Joint-Tech-Elec-C5080WR-04P_C477015.pdf) +connector side-entry ATA PATA IDE 5.25 inch floppy drive power +0 +6 +5 +Connector +NS-Tech_Grove_1x04_P2mm_Vertical +https://statics3.seeedstudio.com/images/opl/datasheet/3470130P1.pdf +Grove-1x04 +0 +4 +4 +Connector +OCN_OK-01GM030-04_2x15_P0.4mm_Vertical +Board to board connector, 2x15, 0.4mm pitch, http://www.main-soul.com/datasheet/ocn/connector/Spec_Draw_OK-01.pdf +board-to-board +0 +30 +30 +Connector +SpringContact_Harwin_S1941-46R +7.25mm SMT Multi-directional Spring Contact (T+R), https://cdn.harwin.com/pdfs/S1941R.pdf +spring contact emi emc shield +0 +1 +1 +Connector +Tag-Connect_TC2030-IDC-FP_2x03_P1.27mm_Vertical +Tag-Connect programming header; http://www.tag-connect.com/Materials/TC2030-IDC.pdf +tag connect programming header pogo pins +0 +6 +6 +Connector +Tag-Connect_TC2030-IDC-NL_2x03_P1.27mm_Vertical +Tag-Connect programming header; http://www.tag-connect.com/Materials/TC2030-IDC-NL.pdf +tag connect programming header pogo pins +0 +6 +6 +Connector +Tag-Connect_TC2050-IDC-FP_2x05_P1.27mm_Vertical +Tag-Connect programming header; http://www.tag-connect.com/Materials/TC2050-IDC-430%20Datasheet.pdf +tag connect programming header pogo pins +0 +10 +10 +Connector +Tag-Connect_TC2050-IDC-NL_2x05_P1.27mm_Vertical +Tag-Connect programming header; http://www.tag-connect.com/Materials/TC2050-IDC-NL%20Datasheet.pdf +tag connect programming header pogo pins +0 +10 +10 +Connector +Tag-Connect_TC2050-IDC-NL_2x05_P1.27mm_Vertical_with_bottom_clip +Tag-Connect programming header with bottom courtyard for TC2050-NL Clip board ; https://www.tag-connect.com/wp-content/uploads/bsk-pdf-manager/TC2050-IDC-NL_Datasheet_8.pdf https://www.tag-connect.com/wp-content/uploads/bsk-pdf-manager/TC2050-CLIP_Datasheet_25.pdf +tag connect programming header pogo pins +0 +10 +10 +Connector +Tag-Connect_TC2070-IDC-FP_2x07_P1.27mm_Vertical +Tag-Connect programming header; http://www.tag-connect.com/Materials/TC2070-IDC%20Datasheet.pdf +tag connect programming header pogo pins +0 +14 +14 +Connector_AMASS +AMASS_MR30PW-FB_1x03_P3.50mm_Horizontal +Connector XT30 Horizontal PCB Female, https://www.tme.eu/en/Document/5e47640ba39fa492dbd4c0f4c8ae7b93/MR30PW%20SPEC.pdf +RC Connector XT30 +0 +5 +3 +Connector_AMASS +AMASS_MR30PW-M_1x03_P3.50mm_Horizontal +Connector XT30 Horizontal PCB Male, https://www.tme.eu/en/Document/5e47640ba39fa492dbd4c0f4c8ae7b93/MR30PW%20SPEC.pdf +RC Connector XT30 +0 +5 +3 +Connector_AMASS +AMASS_XT30PW-F_1x02_P2.50mm_Horizontal +Connector XT30 Horizontal PCB Female, https://www.tme.eu/en/Document/ce4077e36b79046da520ca73227e15de/XT30PW%20SPEC.pdf +RC Connector XT30 +0 +4 +2 +Connector_AMASS +AMASS_XT30PW-M_1x02_P2.50mm_Horizontal +Connector XT30 Horizontal PCB Male, https://www.tme.eu/en/Document/ce4077e36b79046da520ca73227e15de/XT30PW%20SPEC.pdf +RC Connector XT30 +0 +4 +2 +Connector_AMASS +AMASS_XT30U-F_1x02_P5.0mm_Vertical +Connector XT30 Vertical Cable Female, https://www.tme.eu/en/Document/3cbfa5cfa544d79584972dd5234a409e/XT30U%20SPEC.pdf +RC Connector XT30 +0 +2 +2 +Connector_AMASS +AMASS_XT30U-M_1x02_P5.0mm_Vertical +Connector XT30 Vertical Cable Male, https://www.tme.eu/en/Document/3cbfa5cfa544d79584972dd5234a409e/XT30U%20SPEC.pdf +RC Connector XT30 +0 +2 +2 +Connector_AMASS +AMASS_XT30UPB-F_1x02_P5.0mm_Vertical +Connector XT30 Vertical PCB Female, https://www.tme.eu/en/Document/4acc913878197f8c2e30d4b8cdc47230/XT30UPB%20SPEC.pdf +RC Connector XT30 +0 +2 +2 +Connector_AMASS +AMASS_XT30UPB-M_1x02_P5.0mm_Vertical +Connector XT30 Vertical PCB Male, https://www.tme.eu/en/Document/4acc913878197f8c2e30d4b8cdc47230/XT30UPB%20SPEC.pdf +RC Connector XT30 +0 +2 +2 +Connector_AMASS +AMASS_XT60-F_1x02_P7.20mm_Vertical +AMASS female XT60, through hole, vertical, https://www.tme.eu/Document/2d152ced3b7a446066e6c419d84bb460/XT60%20SPEC.pdf +XT60 female vertical +0 +2 +2 +Connector_AMASS +AMASS_XT60-M_1x02_P7.20mm_Vertical +AMASS female XT60, through hole, vertical, https://www.tme.eu/Document/2d152ced3b7a446066e6c419d84bb460/XT60%20SPEC.pdf +XT60 female vertical +0 +2 +2 +Connector_AMASS +AMASS_XT60IPW-M_1x03_P7.20mm_Horizontal +Connector XT60 Horizontal PCB Male, https://www.bto.pl/pdf/08988/XT60IPW-M3.pdf +RC Connector XT60 +0 +5 +3 +Connector_AMASS +AMASS_XT60PW-F_1x02_P7.20mm_Horizontal +Connector XT60 Horizontal PCB Female, https://www.tme.eu/en/Document/9b8d0c5eb7094295f3d3112c214d3ade/XT60PW%20SPEC.pdf +RC Connector XT60 +0 +4 +2 +Connector_AMASS +AMASS_XT60PW-M_1x02_P7.20mm_Horizontal +Connector XT60 Horizontal PCB Female, https://www.tme.eu/en/Document/9b8d0c5eb7094295f3d3112c214d3ade/XT60PW%20SPEC.pdf +RC Connector XT60 +0 +4 +2 +Connector_Amphenol +Amphenol_M8S-03PMMR-SF8001 +M8 Male connector for panel, 90° PCB mount (https://www.amphenolltw.com/2012download/2D%20PDF/03_M%20Series%20Sensor%20Connectors/M8S-XXPMMR-SF8001.pdf) +three-pin M8 +0 +5 +4 +Connector_Audio +Jack_3.5mm_CUI_SJ-3523-SMT_Horizontal +3.5 mm, Stereo, Right Angle, Surface Mount (SMT), Audio Jack Connector (https://www.cui.com/product/resource/sj-352x-smt-series.pdf) +3.5mm audio cui horizontal jack stereo +0 +3 +3 +Connector_Audio +Jack_3.5mm_CUI_SJ-3524-SMT_Horizontal +3.5 mm, Stereo, Right Angle, Surface Mount (SMT), Audio Jack Connector (https://www.cui.com/product/resource/sj-352x-smt-series.pdf) +3.5mm audio cui horizontal jack stereo +0 +4 +4 +Connector_Audio +Jack_3.5mm_CUI_SJ1-3523N_Horizontal +TRS 3.5mm, horizontal, through-hole, https://www.cuidevices.com/product/resource/pdf/sj1-352xn.pdf +TRS audio jack stereo horizontal +0 +3 +3 +Connector_Audio +Jack_3.5mm_CUI_SJ1-3524N_Horizontal +TRS 3.5mm, horizontal, through-hole, https://www.cuidevices.com/product/resource/pdf/sj1-352xn.pdf +TRS audio jack stereo horizontal +0 +4 +4 +Connector_Audio +Jack_3.5mm_CUI_SJ1-3525N_Horizontal +TRS 3.5mm, horizontal, through-hole, https://www.cuidevices.com/product/resource/pdf/sj1-352xn.pdf +TRS audio jack stereo horizontal +0 +5 +5 +Connector_Audio +Jack_3.5mm_CUI_SJ1-3533NG_Horizontal +TRS 3.5mm, horizontal, through-hole, https://www.cui.com/product/resource/sj1-353xng.pdf +TRS audio jack stereo horizontal +0 +3 +3 +Connector_Audio +Jack_3.5mm_CUI_SJ1-3533NG_Horizontal_CircularHoles +TRS 3.5mm, horizontal, through-hole, , circular holeshttps://www.cui.com/product/resource/sj1-353xng.pdf +TRS audio jack stereo horizontal circular +0 +3 +3 +Connector_Audio +Jack_3.5mm_CUI_SJ1-3535NG_Horizontal +TRS 3.5mm, horizontal, through-hole, with switch, https://www.cui.com/product/resource/sj1-353xng.pdf +TRS audio jack stereo horizontal +0 +5 +5 +Connector_Audio +Jack_3.5mm_CUI_SJ1-3535NG_Horizontal_CircularHoles +TRS 3.5mm, horizontal, through-hole, with switch, circular holes, https://www.cui.com/product/resource/sj1-353xng.pdf +TRS audio jack stereo horizontal circular +0 +5 +5 +Connector_Audio +Jack_3.5mm_CUI_SJ2-3593D-SMT_Horizontal +3.5 mm, Stereo, Right Angle, Surface Mount (SMT), Audio Jack Connector (https://www.cuidevices.com/product/resource/sj2-359x-smt.pdf) +3.5mm audio cui horizontal jack stereo +0 +5 +5 +Connector_Audio +Jack_3.5mm_KoreanHropartsElec_PJ-320D-4A_Horizontal +Korean Hroparts Elec PJ-320D-4A (https://datasheet.lcsc.com/lcsc/1810121716_Korean-Hroparts-Elec-PJ-320D-4A_C95562.pdf) +smt female jack horizontal +0 +4 +4 +Connector_Audio +Jack_3.5mm_Ledino_KB3SPRS_Horizontal +https://www.reichelt.de/index.html?ACTION=7&LA=3&OPEN=0&INDEX=0&FILENAME=C160%252FKB3SPRS.pdf +jack stereo TRS +0 +5 +5 +Connector_Audio +Jack_3.5mm_Lumberg_1503_02_Horizontal +TRS 3.5mm, horizontal, Surface Mount (SMT), https://downloads.lumberg.com/datenblaetter/en/1503_02.pdf +TRS audio jack horizontal +0 +4 +3 +Connector_Audio +Jack_3.5mm_Lumberg_1503_03_Horizontal +TRS 3.5mm, horizontal, Surface Mount (SMT), https://downloads.lumberg.com/datenblaetter/en/1503_03.pdf +TRS audio jack horizontal +0 +5 +4 +Connector_Audio +Jack_3.5mm_Lumberg_1503_07_Horizontal +TRS 3.5mm, horizontal, through-hole, height 5mm, width 6.5mm, https://downloads.lumberg.com/datenblaetter/en/1503_07.pdf +TRS audio jack horizontal +0 +4 +3 +Connector_Audio +Jack_3.5mm_PJ311_Horizontal +PJ311 6pin SMD 3.5mm stereo headphones jack. +headphones jack plug stereo 3.5mm PJ311 +0 +6 +6 +Connector_Audio +Jack_3.5mm_PJ320D_Horizontal +Headphones with microphone connector, 3.5mm, 4 pins (http://www.qingpu-electronics.com/en/products/WQP-PJ320D-72.html) +3.5mm jack mic microphone phones headphones 4pins audio plug +0 +4 +4 +Connector_Audio +Jack_3.5mm_PJ320E_Horizontal +Headphones with microphone connector, 3.5mm, 4 pins (http://www.qingpu-electronics.com/en/products/WQP-PJ320E-177.html) +3.5mm jack mic microphone phones headphones 4pins audio plug +0 +5 +4 +Connector_Audio +Jack_3.5mm_PJ31060-I_Horizontal +PJ31060-I 6pin SMD 3.5mm headphones jack (http://www.china-bsun.com/Product48/1577.html) +headphones jack plug stereo 3.5mm PJ31060-I PJ31060 +0 +6 +6 +Connector_Audio +Jack_3.5mm_QingPu_WQP-PJ398SM_Vertical_CircularHoles +TRS 3.5mm, vertical, Thonkiconn, PCB mount, (http://www.qingpu-electronics.com/en/products/WQP-PJ398SM-362.html) +WQP-PJ398SM WQP-PJ301M-12 TRS 3.5mm mono vertical jack thonkiconn qingpu +0 +3 +3 +Connector_Audio +Jack_3.5mm_Switronic_ST-005-G_horizontal +3.5mm horizontal headphones jack, http://akizukidenshi.com/download/ds/switronic/ST-005-G.pdf +Connector Audio Switronic ST-005-G +0 +4 +3 +Connector_Audio +Jack_3.5mm_Technik_TWP-3002_Horizontal +3.5mm Horizontal Waterproof Stereo Headphones Jack, https://www.technik.com.hk/images/pdf_product/WP3002-PA66-A.pdf +audio jack stereo horizontal waterproof +0 +7 +4 +Connector_Audio +Jack_6.35mm_Neutrik_NJ2FD-V_Vertical +6.35mm (1/4 in) Vertical Jack, Non-switching mono jack (T/S), https://www.neutrik.com/en/product/nj2fd-v +neutrik jack vertical +0 +2 +2 +Connector_Audio +Jack_6.35mm_Neutrik_NJ3FD-V_Vertical +6.35mm (1/4 in) Vertical Jack, Non-switching stereo jack (T/R/S), https://www.neutrik.com/en/product/nj3fd-v +neutrik jack vertical +0 +3 +3 +Connector_Audio +Jack_6.35mm_Neutrik_NJ5FD-V_Vertical +6.35mm (1/4 in) Vertical Jack, 2 x switching (normalling) stereo jack (T/TN/R/RN/S), https://www.neutrik.com/en/product/nj5fd-v +neutrik jack vertical +0 +5 +5 +Connector_Audio +Jack_6.35mm_Neutrik_NJ6FD-V_Vertical +6.35mm (1/4 in) Vertical Jack, 3 x switching (normalling) stereo jack (T/TN/R/RN/S/SN), https://www.neutrik.com/en/product/nj6fd-v +neutrik jack vertical +0 +6 +6 +Connector_Audio +Jack_6.35mm_Neutrik_NJ6TB-V_Vertical +6.35mm (1/4 in) Vertical Jack, 3 x switching (normalling) stereo jack B-gauge type (T/TN/R/RN/S/SN), https://www.neutrik.com/en/product/nj6tb-v +neutrik jack vertical +0 +6 +6 +Connector_Audio +Jack_6.35mm_Neutrik_NMJ4HCD2_Horizontal +M Series, 6.35mm (1/4in) mono jack, switched, with chrome ferrule and straight PCB pins, https://www.neutrik.com/en/product/nmj4hcd2 +neutrik jack m +0 +4 +4 +Connector_Audio +Jack_6.35mm_Neutrik_NMJ4HFD2_Horizontal +M Series, 6.35mm (1/4in) mono jack, switched, with full threaded nose and straight PCB pins, https://www.neutrik.com/en/product/nmj4hfd2 +neutrik jack m +0 +4 +4 +Connector_Audio +Jack_6.35mm_Neutrik_NMJ4HFD3_Horizontal +M Series, 6.35mm (1/4in) mono jack, switched, with a full threaded nose and offset PCB pins, https://www.neutrik.com/en/product/nmj4hfd3 +neutrik jack m +0 +4 +4 +Connector_Audio +Jack_6.35mm_Neutrik_NMJ4HHD2_Horizontal +M Series, 6.35mm (1/4in) mono jack, switched, with a half threaded nose and offset PCB pins, https://www.neutrik.com/en/product/nmj4hhd2 +neutrik jack m +0 +4 +4 +Connector_Audio +Jack_6.35mm_Neutrik_NMJ6HCD2_Horizontal +M Series, 6.35mm (1/4in) stereo jack, switched, with chrome ferrule and straight PCB pins, https://www.neutrik.com/en/product/nmj6hcd2 +neutrik jack m +0 +6 +6 +Connector_Audio +Jack_6.35mm_Neutrik_NMJ6HCD3_Horizontal +M Series, 6.35mm (1/4in) stereo jack, switched, with chrome ferrule and offset PCB pins, https://www.neutrik.com/en/product/nmj6hcd3 +neutrik jack m +0 +6 +6 +Connector_Audio +Jack_6.35mm_Neutrik_NMJ6HFD2-AU_Horizontal +M Series, 6.35mm (1/4in) stereo jack, switched, full threaded nose, straight PCB pins, gold plated contacts, https://www.neutrik.com/en/product/nmj6hfd2-au +neutrik jack m +0 +6 +6 +Connector_Audio +Jack_6.35mm_Neutrik_NMJ6HFD2_Horizontal +M Series, 6.35mm (1/4in) stereo jack, switched, with full threaded nose and straight PCB pins, https://www.neutrik.com/en/product/nmj6hfd2 +neutrik jack m +0 +6 +6 +Connector_Audio +Jack_6.35mm_Neutrik_NMJ6HFD3_Horizontal +M Series, 6.35mm (1/4in) stereo jack, switched, with full threaded nose and offset PCB pins, https://www.neutrik.com/en/product/nmj6hfd3 +neutrik jack m +0 +6 +6 +Connector_Audio +Jack_6.35mm_Neutrik_NMJ6HFD4_Horizontal +M Series, 6.35mm (1/4in) stereo jack, switched, with full threaded nose and fishtail PCB pins, https://www.neutrik.com/en/product/nmj6hfd4 +neutrik jack m +0 +6 +6 +Connector_Audio +Jack_6.35mm_Neutrik_NMJ6HHD2_Horizontal +M Series, 6.35mm (1/4in) stereo jack, switched, with half threaded nose and offset PCB pins, https://www.neutrik.com/en/product/nmj6hhd2 +neutrik jack m +0 +6 +6 +Connector_Audio +Jack_6.35mm_Neutrik_NRJ3HF-1_Horizontal +Slim Jacks, 6.35mm (1/4in) stereo jack, unswitched, fully threaded nose, sleeve contact/front panel connection, https://www.neutrik.com/en/product/nrj3hf-1 +neutrik jack slim +0 +4 +4 +Connector_Audio +Jack_6.35mm_Neutrik_NRJ4HF-1_Horizontal +Slim Jacks, 6.35mm (1/4in) mono jack, switched, fully threaded nose, sleeve contact/front panel connection, https://www.neutrik.com/en/product/nrj4hf-1 +neutrik jack slim +0 +4 +4 +Connector_Audio +Jack_6.35mm_Neutrik_NRJ4HF_Horizontal +Slim Jacks, 6.35mm (1/4in) mono jack, switched, fully threaded nose, https://www.neutrik.com/en/product/nrj4hf +neutrik jack slim +0 +4 +4 +Connector_Audio +Jack_6.35mm_Neutrik_NRJ4HH-1_Horizontal +Slim Jacks, 6.35mm (1/4in) mono jack, switched, half threaded nose, sleeve contact/front panel connection, https://www.neutrik.com/en/product/nrj4hh-1 +neutrik jack slim +0 +4 +4 +Connector_Audio +Jack_6.35mm_Neutrik_NRJ4HH_Horizontal +Slim Jacks, 6.35mm (1/4in) mono jack, switched, half threaded nose, https://www.neutrik.com/en/product/nrj4hh +neutrik jack slim +0 +4 +4 +Connector_Audio +Jack_6.35mm_Neutrik_NRJ6HF-1-AU_Horizontal +Slim Jacks, 6.35mm (1/4in) stereo jack, switched, gold plated contacts, fully threaded nose, sleeve contact/front panel connection, https://www.neutrik.com/en/product/nrj6hf-1-au +neutrik jack slim +0 +6 +6 +Connector_Audio +Jack_6.35mm_Neutrik_NRJ6HF-1_Horizontal +Slim Jacks, 6.35mm (1/4in) stereo jack, switched, fully threaded nose, sleeve contact/front panel connection, https://www.neutrik.com/en/product/nrj6hf-1 +neutrik jack slim +0 +6 +6 +Connector_Audio +Jack_6.35mm_Neutrik_NRJ6HF-AU_Horizontal +Slim Jacks, 6.35mm (1/4in) stereo jack, switched, gold plated contacts, fully threaded nose, https://www.neutrik.com/en/product/nrj6hf-au +neutrik jack slim +0 +6 +6 +Connector_Audio +Jack_6.35mm_Neutrik_NRJ6HF_Horizontal +Slim Jacks, 6.35mm (1/4in) stereo jack, switched, fully threaded nose, https://www.neutrik.com/en/product/nrj6hf +neutrik jack slim +0 +6 +6 +Connector_Audio +Jack_6.35mm_Neutrik_NRJ6HH-1_Horizontal +Slim Jacks, 6.35mm (1/4in) stereo jack, switched, half threaded nose, sleeve contact/front panel connection, https://www.neutrik.com/en/product/nrj6hh-1 +neutrik jack slim +0 +6 +6 +Connector_Audio +Jack_6.35mm_Neutrik_NRJ6HH-AU_Horizontal +Slim Jacks, 6.35mm (1/4in) stereo jack, switched, gold plated contacts, half threaded nose, https://www.neutrik.com/en/product/nrj6hh-au +neutrik jack slim +0 +6 +6 +Connector_Audio +Jack_6.35mm_Neutrik_NRJ6HH_Horizontal +Slim Jacks, 6.35mm (1/4in) stereo jack, switched, half threaded nose, https://www.neutrik.com/en/product/nrj6hh +neutrik jack slim +0 +6 +6 +Connector_Audio +Jack_6.35mm_Neutrik_NRJ6HM-1-AU_Horizontal +Slim Jacks, 6.35mm (1/4in) stereo jack, metal nose, gold plated contacts, efficient chassis ground connection, T+R+S normalling contact, https://www.neutrik.com/en/product/nrj6hm-1-au +neutrik jack slim +0 +6 +6 +Connector_Audio +Jack_6.35mm_Neutrik_NRJ6HM-1-PRE_Horizontal +Slim Jacks, 6.35mm (1/4in) stereo jack, metal nose, efficient chassis ground connection, T+R normalling contact, https://www.neutrik.com/en/product/nrj6hm-1-pre +neutrik jack slim +0 +6 +5 +Connector_Audio +Jack_6.35mm_Neutrik_NRJ6HM-1_Horizontal +Slim Jacks, 6.35mm (1/4in) stereo jack, metal nose with efficient chassis ground connection, T+R+S normalling contact, https://www.neutrik.com/en/product/nrj6hm-1 +neutrik jack slim +0 +6 +6 +Connector_Audio +Jack_6.35mm_Neutrik_NSJ8HC_Horizontal +Stacking Jacks, Mono dual jack, full nose, https://www.neutrik.com/en/product/nsj8hc +neutrik jack stacking +0 +9 +9 +Connector_Audio +Jack_6.35mm_Neutrik_NSJ8HL_Horizontal +Stacking Jacks, Mono dual jack, quick fix nose, https://www.neutrik.com/en/product/nsj8hl +neutrik jack stacking +0 +9 +9 +Connector_Audio +Jack_6.35mm_Neutrik_NSJ12HC_Horizontal +Stacking Jacks, Stereo dual jack, full nose, https://www.neutrik.com/en/product/nsj12hc +neutrik jack stacking +0 +13 +13 +Connector_Audio +Jack_6.35mm_Neutrik_NSJ12HF-1_Horizontal +Stacking Jacks, Stereo dual jack, full threaded nose, https://www.neutrik.com/en/product/nsj12hf-1 +neutrik jack stacking +0 +13 +13 +Connector_Audio +Jack_6.35mm_Neutrik_NSJ12HH-1_Horizontal +Stacking Jacks, Stereo dual jack, half threaded nose, https://www.neutrik.com/en/product/nsj12hh-1 +neutrik jack stacking +0 +13 +13 +Connector_Audio +Jack_6.35mm_Neutrik_NSJ12HL_Horizontal +Stacking Jacks, Stereo dual jack, quick fix nose, https://www.neutrik.com/en/product/nsj12hl +neutrik jack stacking +0 +13 +13 +Connector_Audio +Jack_XLR-6.35mm_Neutrik_NCJ5FI-H-0_Horizontal +Combo I series, 3 pole XLR female receptacle with 6.35mm (1/4in) mono jack without switching contact, horizontal PCB mount, https://www.neutrik.com/en/product/ncj5fi-h-0 +neutrik jack combo i +0 +6 +6 +Connector_Audio +Jack_XLR-6.35mm_Neutrik_NCJ5FI-H_Horizontal +Combo I series, 3 pole XLR female receptacle with 6.35mm (1/4in) mono jack without switching contact, horizontal PCB mount, retention spring, https://www.neutrik.com/en/product/ncj5fi-h +neutrik jack combo i +0 +6 +6 +Connector_Audio +Jack_XLR-6.35mm_Neutrik_NCJ5FI-V-0_Vertical +Combo I series, 3 pole XLR female receptacle with 6.35mm (1/4in) mono jack without switching contact, vertical PCB mount, https://www.neutrik.com/en/product/ncj5fi-v-0 +neutrik jack combo i +0 +6 +6 +Connector_Audio +Jack_XLR-6.35mm_Neutrik_NCJ5FI-V_Vertical +Combo I series, 3 pole XLR female receptacle with 6.35mm (1/4in) mono jack without switching contact, vertical PCB mount, retention spring, https://www.neutrik.com/en/product/ncj5fi-v +neutrik jack combo i +0 +6 +6 +Connector_Audio +Jack_XLR-6.35mm_Neutrik_NCJ6FA-H-0_Horizontal +Combo A series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack, horizontal PCB mount, retention spring, https://www.neutrik.com/en/product/ncj6fa-h-0 +neutrik jack combo a +0 +8 +7 +Connector_Audio +Jack_XLR-6.35mm_Neutrik_NCJ6FA-H-DA_Horizontal +Combo A series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack, horizontal PCB mount, asymmetric push, https://www.neutrik.com/en/product/ncj6fa-h-da +neutrik jack combo a +0 +8 +7 +Connector_Audio +Jack_XLR-6.35mm_Neutrik_NCJ6FA-H_Horizontal +Combo A series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack, horizontal PCB mount, https://www.neutrik.com/en/product/ncj6fa-h +neutrik jack combo a +0 +8 +7 +Connector_Audio +Jack_XLR-6.35mm_Neutrik_NCJ6FA-V-0_Vertical +Combo A series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack, vertical PCB mount, retention spring, https://www.neutrik.com/en/product/ncj6fa-v-0 +neutrik jack combo a +0 +8 +7 +Connector_Audio +Jack_XLR-6.35mm_Neutrik_NCJ6FA-V-DA_Vertical +Combo A series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack, vertical PCB mount, asymmetric push, https://www.neutrik.com/en/product/ncj6fa-v-da +neutrik jack combo a +0 +8 +7 +Connector_Audio +Jack_XLR-6.35mm_Neutrik_NCJ6FA-V_Vertical +Combo A series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack, vertical PCB mount, https://www.neutrik.com/en/product/ncj6fa-v +neutrik jack combo a +0 +8 +7 +Connector_Audio +Jack_XLR-6.35mm_Neutrik_NCJ6FI-H-0_Horizontal +Combo I series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack without switching contact, horizontal PCB mount, https://www.neutrik.com/en/product/ncj6fi-h-0 +neutrik jack combo i +0 +7 +7 +Connector_Audio +Jack_XLR-6.35mm_Neutrik_NCJ6FI-H_Horizontal +Combo I series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack without switching contact, horizontal PCB mount, retention spring, https://www.neutrik.com/en/product/ncj6fi-h +neutrik jack combo i +0 +7 +7 +Connector_Audio +Jack_XLR-6.35mm_Neutrik_NCJ6FI-V-0_Vertical +Combo I series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack without switching contact, vertical PCB mount, https://www.neutrik.com/en/product/ncj6fi-v-0 +neutrik jack combo i +0 +7 +7 +Connector_Audio +Jack_XLR-6.35mm_Neutrik_NCJ6FI-V_Vertical +Combo I series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack without switching contact, vertical PCB mount, retention spring, https://www.neutrik.com/en/product/ncj6fi-v +neutrik jack combo i +0 +7 +7 +Connector_Audio +Jack_XLR-6.35mm_Neutrik_NCJ9FI-H-0_Horizontal +Combo I series, 3 pole XLR female receptacle with 6.35mm (1/4in) switching stereo jack, horizontal PCB mount, https://www.neutrik.com/en/product/ncj9fi-h-0 +neutrik jack combo i +0 +10 +10 +Connector_Audio +Jack_XLR-6.35mm_Neutrik_NCJ9FI-H_Horizontal +Combo I series, 3 pole XLR female receptacle with 6.35mm (1/4in) switching stereo jack, horizontal PCB mount, retention spring, https://www.neutrik.com/en/product/ncj9fi-h +neutrik jack combo i +0 +10 +10 +Connector_Audio +Jack_XLR-6.35mm_Neutrik_NCJ9FI-V-0_Vertical +Combo I series, 3 pole XLR female receptacle with 6.35mm (1/4in) switching stereo jack, vertical PCB mount, https://www.neutrik.com/en/product/ncj9fi-v-0 +neutrik jack combo i +0 +10 +10 +Connector_Audio +Jack_XLR-6.35mm_Neutrik_NCJ9FI-V_Vertical +Combo I series, 3 pole XLR female receptacle with 6.35mm (1/4in) switching stereo jack, vertical PCB mount, retention spring, https://www.neutrik.com/en/product/ncj9fi-v +neutrik jack combo i +0 +10 +10 +Connector_Audio +Jack_XLR-6.35mm_Neutrik_NCJ10FI-H-0_Horizontal +Combo I series, 3 pole XLR female receptacle with 6.35mm (1/4in) switching stereo jack and switching ground contact, horizontal PCB mount, https://www.neutrik.com/en/product/ncj10fi-h-0 +neutrik jack combo i +0 +11 +11 +Connector_Audio +Jack_XLR-6.35mm_Neutrik_NCJ10FI-H_Horizontal +Combo I series, 3 pole XLR female receptacle with 6.35mm (1/4in) switching stereo jack and switching ground contact, horizontal PCB mount, retention spring, https://www.neutrik.com/en/product/ncj10fi-h +neutrik jack combo i +0 +11 +11 +Connector_Audio +Jack_XLR-6.35mm_Neutrik_NCJ10FI-V-0_Vertical +Combo I series, 3 pole XLR female receptacle with 6.35mm (1/4in) switching stereo jack and switching ground contact, vertical PCB mount, https://www.neutrik.com/en/product/ncj10fi-v-0 +neutrik jack combo i +0 +11 +11 +Connector_Audio +Jack_XLR-6.35mm_Neutrik_NCJ10FI-V_Vertical +Combo I series, 3 pole XLR female receptacle with 6.35mm (1/4in) switching stereo jack and switching ground contact, vertical PCB mount, retention spring, https://www.neutrik.com/en/product/ncj10fi-v +neutrik jack combo i +0 +11 +11 +Connector_Audio +Jack_XLR_Neutrik_NC3FAAH-0_Horizontal +AA Series, 3 pole female XLR receptacle, grounding: without ground/shell contact, horizontal PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3faah-0 +neutrik xlr aa +0 +3 +3 +Connector_Audio +Jack_XLR_Neutrik_NC3FAAH1-0_Horizontal +AA Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3faah1-0 +neutrik xlr aa +0 +3 +3 +Connector_Audio +Jack_XLR_Neutrik_NC3FAAH1-DA_Horizontal +AA Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mount, asymmetric push, https://www.neutrik.com/en/product/nc3faah1-da +neutrik xlr aa +0 +3 +3 +Connector_Audio +Jack_XLR_Neutrik_NC3FAAH1_Horizontal +AA Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc3faah1 +neutrik xlr aa +0 +3 +3 +Connector_Audio +Jack_XLR_Neutrik_NC3FAAH2-0_Horizontal +AA Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3faah2-0 +neutrik xlr aa +0 +4 +4 +Connector_Audio +Jack_XLR_Neutrik_NC3FAAH2_Horizontal +AA Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc3faah2 +neutrik xlr aa +0 +4 +4 +Connector_Audio +Jack_XLR_Neutrik_NC3FAAH_Horizontal +AA Series, 3 pole female XLR receptacle, grounding: without ground/shell contact, horizontal PCB mount, https://www.neutrik.com/en/product/nc3faah +neutrik xlr aa +0 +3 +3 +Connector_Audio +Jack_XLR_Neutrik_NC3FAAV-0_Vertical +AA Series, 3 pole female receptacle, grounding: without ground/shell contact, vertical PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3faav-0 +neutrik xlr aa +0 +3 +3 +Connector_Audio +Jack_XLR_Neutrik_NC3FAAV1-0_Vertical +AA Series, 3 pole female receptacle, grounding: mating connector shell to pin1 and front panel, vertical PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3faav1-0 +neutrik xlr aa +0 +3 +3 +Connector_Audio +Jack_XLR_Neutrik_NC3FAAV1-DA_Vertical +AA Series, 3 pole female receptacle, grounding: mating connector shell to pin1 and front panel, vertical PCB mount, asymmetric push, https://www.neutrik.com/en/product/nc3faav1-da +neutrik xlr aa +0 +3 +3 +Connector_Audio +Jack_XLR_Neutrik_NC3FAAV1_Vertical +AA Series, 3 pole female receptacle, grounding: mating connector shell to pin1 and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc3faav1 +neutrik xlr aa +0 +3 +3 +Connector_Audio +Jack_XLR_Neutrik_NC3FAAV2-0_Vertical +AA Series, 3 pole female receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3faav2-0 +neutrik xlr aa +0 +4 +4 +Connector_Audio +Jack_XLR_Neutrik_NC3FAAV2_Vertical +AA Series, 3 pole female receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc3faav2 +neutrik xlr aa +0 +4 +4 +Connector_Audio +Jack_XLR_Neutrik_NC3FAAV_Vertical +AA Series, 3 pole female receptacle, grounding: without ground/shell contact, vertical PCB mount, https://www.neutrik.com/en/product/nc3faav +neutrik xlr aa +0 +3 +3 +Connector_Audio +Jack_XLR_Neutrik_NC3FAH-0_Horizontal +A Series, 3 pole female XLR receptacle, grounding: without ground/shell contact, horizontal PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3fah-0 +neutrik xlr a +0 +3 +3 +Connector_Audio +Jack_XLR_Neutrik_NC3FAH1-0_Horizontal +A Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3fah1-0 +neutrik xlr a +0 +3 +3 +Connector_Audio +Jack_XLR_Neutrik_NC3FAH1-DA_Horizontal +A Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mount, asymmetric push, https://www.neutrik.com/en/product/nc3fah1-da +neutrik xlr a +0 +3 +3 +Connector_Audio +Jack_XLR_Neutrik_NC3FAH1_Horizontal +A Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc3fah1 +neutrik xlr a +0 +3 +3 +Connector_Audio +Jack_XLR_Neutrik_NC3FAH2-0_Horizontal +A Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3fah2-0 +neutrik xlr a +0 +4 +4 +Connector_Audio +Jack_XLR_Neutrik_NC3FAH2-DA_Horizontal +A Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, asymmetric push, https://www.neutrik.com/en/product/nc3fah2-da +neutrik xlr a +0 +4 +4 +Connector_Audio +Jack_XLR_Neutrik_NC3FAH2_Horizontal +A Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc3fah2 +neutrik xlr a +0 +4 +4 +Connector_Audio +Jack_XLR_Neutrik_NC3FAHL-0_Horizontal +A Series, 3 pole female XLR receptacle, grounding: without ground/shell contact, lateral left PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3fahl-0 +neutrik xlr a +0 +3 +3 +Connector_Audio +Jack_XLR_Neutrik_NC3FAHL1-0_Horizontal +A Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, lateral left PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3fahl1-0 +neutrik xlr a +0 +3 +3 +Connector_Audio +Jack_XLR_Neutrik_NC3FAHL1_Horizontal +A Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, lateral left PCB mount, https://www.neutrik.com/en/product/nc3fahl1 +neutrik xlr a +0 +3 +3 +Connector_Audio +Jack_XLR_Neutrik_NC3FAHR-0_Horizontal +A Series, 3 pole female XLR receptacle, grounding: without ground / shell contact, lateral right PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3fahr-0 +neutrik xlr a +0 +3 +3 +Connector_Audio +Jack_XLR_Neutrik_NC3FAHR1-0_Horizontal +A Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, lateral right PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3fahr1-0 +neutrik xlr a +0 +3 +3 +Connector_Audio +Jack_XLR_Neutrik_NC3FAHR1_Horizontal +A Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, lateral right PCB mount, https://www.neutrik.com/en/product/nc3fahr1 +neutrik xlr a +0 +3 +3 +Connector_Audio +Jack_XLR_Neutrik_NC3FAHR2-0_Horizontal +A Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, lateral right PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3fahr2-0 +neutrik xlr a +0 +4 +4 +Connector_Audio +Jack_XLR_Neutrik_NC3FAHR2_Horizontal +A Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, lateral right PCB mount, https://www.neutrik.com/en/product/nc3fahr2 +neutrik xlr a +0 +4 +4 +Connector_Audio +Jack_XLR_Neutrik_NC3FAH_Horizontal +A Series, 3 pole female XLR receptacle, grounding: without ground/shell contact, horizontal PCB mount, https://www.neutrik.com/en/product/nc3fah +neutrik xlr a +0 +3 +3 +Connector_Audio +Jack_XLR_Neutrik_NC3FAV-0_Vertical +A Series, 3 pole female XLR receptacle, grounding: without ground / shell contact, vertical PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3fav-0 +neutrik xlr a +0 +3 +3 +Connector_Audio +Jack_XLR_Neutrik_NC3FAV1-0_Vertical +A Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, vertical PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3fav1-0 +neutrik xlr a +0 +3 +3 +Connector_Audio +Jack_XLR_Neutrik_NC3FAV1-DA_Vertical +A Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, vertical PCB mount, asymmetric push, https://www.neutrik.com/en/product/nc3fav1-da +neutrik xlr a +0 +3 +3 +Connector_Audio +Jack_XLR_Neutrik_NC3FAV1_Vertical +A Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc3fav1 +neutrik xlr a +0 +3 +3 +Connector_Audio +Jack_XLR_Neutrik_NC3FAV2-0_Vertical +A Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3fav2-0 +neutrik xlr a +0 +4 +4 +Connector_Audio +Jack_XLR_Neutrik_NC3FAV2-DA_Vertical +A Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, asymmetric push, https://www.neutrik.com/en/product/nc3fav2-da +neutrik xlr a +0 +4 +4 +Connector_Audio +Jack_XLR_Neutrik_NC3FAV2_Vertical +A Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc3fav2 +neutrik xlr a +0 +4 +4 +Connector_Audio +Jack_XLR_Neutrik_NC3FAV_Vertical +A Series, 3 pole female XLR receptacle, grounding: without ground / shell contact, vertical PCB mount, https://www.neutrik.com/en/product/nc3fav +neutrik xlr a +0 +3 +3 +Connector_Audio +Jack_XLR_Neutrik_NC3FBH1-B_Horizontal +B Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc3fbh1-b +neutrik xlr b +0 +3 +3 +Connector_Audio +Jack_XLR_Neutrik_NC3FBH1-DA_Horizontal +B Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mount, asymmetric push, https://www.neutrik.com/en/product/nc3fbh1-da +neutrik xlr b +0 +3 +3 +Connector_Audio +Jack_XLR_Neutrik_NC3FBH1-E_Horizontal +B Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mount, additional ground contacts, https://www.neutrik.com/en/product/nc3fbh1-e +neutrik xlr b +0 +3 +3 +Connector_Audio +Jack_XLR_Neutrik_NC3FBH1_Horizontal +B Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc3fbh1 +neutrik xlr b +0 +3 +3 +Connector_Audio +Jack_XLR_Neutrik_NC3FBH2-B_Horizontal +B Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc3fbh2-b +neutrik xlr b +0 +4 +4 +Connector_Audio +Jack_XLR_Neutrik_NC3FBH2-DA_Horizontal +B Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, asymmetric push, https://www.neutrik.com/en/product/nc3fbh2-da +neutrik xlr b +0 +4 +4 +Connector_Audio +Jack_XLR_Neutrik_NC3FBH2-E_Horizontal +B Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, additional ground contacts, https://www.neutrik.com/en/product/nc3fbh2-e +neutrik xlr b +0 +4 +4 +Connector_Audio +Jack_XLR_Neutrik_NC3FBH2_Horizontal +B Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc3fbh2 +neutrik xlr b +0 +4 +4 +Connector_Audio +Jack_XLR_Neutrik_NC3FBHL1_Horizontal +B Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, lateral left PCB mount, https://www.neutrik.com/en/product/nc3fbhl1 +neutrik xlr b +0 +3 +3 +Connector_Audio +Jack_XLR_Neutrik_NC3FBV1-0_Vertical +B Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, vertical PCB mount, retention spring, no latch, https://www.neutrik.com/en/product/nc3fbv1-0 +neutrik xlr b +0 +3 +3 +Connector_Audio +Jack_XLR_Neutrik_NC3FBV1-B_Vertical +B Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, vertical PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc3fbv1-b +neutrik xlr b +0 +3 +3 +Connector_Audio +Jack_XLR_Neutrik_NC3FBV1-DA_Vertical +B Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, vertical PCB mount, asymmetric push, https://www.neutrik.com/en/product/nc3fbv1-da +neutrik xlr b +0 +3 +3 +Connector_Audio +Jack_XLR_Neutrik_NC3FBV1_Vertical +B Series, 3 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc3fbv1 +neutrik xlr b +0 +3 +3 +Connector_Audio +Jack_XLR_Neutrik_NC3FBV2-B_Vertical +B Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc3fbv2-b +neutrik xlr b +0 +4 +4 +Connector_Audio +Jack_XLR_Neutrik_NC3FBV2-DA_Vertical +B Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, asymmetric push, https://www.neutrik.com/en/product/nc3fbv2-da +neutrik xlr b +0 +4 +4 +Connector_Audio +Jack_XLR_Neutrik_NC3FBV2-SW_Vertical +B Series, 3 pole female XLR receptacle, switching contacts, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc3fbv2-sw +neutrik xlr b +0 +7 +7 +Connector_Audio +Jack_XLR_Neutrik_NC3FBV2_Vertical +B Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc3fbv2 +neutrik xlr b +0 +4 +4 +Connector_Audio +Jack_XLR_Neutrik_NC3MAAH-0_Horizontal +AA Series, 3 pole male XLR receptacle, grounding: ground contact connected to shell ground, but not to front panel and Pin 1, horizontal PCB mount, https://www.neutrik.com/en/product/nc3maah-0 +neutrik xlr aa +0 +4 +4 +Connector_Audio +Jack_XLR_Neutrik_NC3MAAH-1_Horizontal +AA Series, 3 pole male XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc3maah-1 +neutrik xlr aa +0 +3 +3 +Connector_Audio +Jack_XLR_Neutrik_NC3MAAH_Horizontal +AA Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc3maah +neutrik xlr aa +0 +4 +4 +Connector_Audio +Jack_XLR_Neutrik_NC3MAAV-0_Vertical +AA Series, 3 pole male XLR receptacle, grounding: ground contact connected to shell ground, but not to front panel and Pin 1, vertical PCB mount, https://www.neutrik.com/en/product/nc3maav-0 +neutrik xlr aa +0 +4 +4 +Connector_Audio +Jack_XLR_Neutrik_NC3MAAV-1_Vertical +AA Series, 3 pole male XLR receptacle, grounding: mating connector shell to pin1 and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc3maav-1 +neutrik xlr aa +0 +3 +3 +Connector_Audio +Jack_XLR_Neutrik_NC3MAAV_Vertical +AA Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc3maav +neutrik xlr aa +0 +4 +4 +Connector_Audio +Jack_XLR_Neutrik_NC3MAFH-PH_Horizontal +A Series, Chassis connector H female (A series layout), mates with Phoenix MSTB2,5/3-ST, horizontal PCB mount, https://www.neutrik.com/en/product/nc3mafh-ph +neutrik xlr a +0 +3 +3 +Connector_Audio +Jack_XLR_Neutrik_NC3MAH-0_Horizontal +A Series, 3 pole male XLR receptacle, grounding: ground contact connected to shell ground, but not to front panel and Pin 1, horizontal PCB mount, https://www.neutrik.com/en/product/nc3mah-0 +neutrik xlr a +0 +4 +4 +Connector_Audio +Jack_XLR_Neutrik_NC3MAHL_Horizontal +A Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, lateral left PCB mount, https://www.neutrik.com/en/product/nc3mahl +neutrik xlr a +0 +4 +4 +Connector_Audio +Jack_XLR_Neutrik_NC3MAHR_Horizontal +A Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, lateral right PCB mount, https://www.neutrik.com/en/product/nc3mahr +neutrik xlr a +0 +4 +4 +Connector_Audio +Jack_XLR_Neutrik_NC3MAH_Horizontal +A Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc3mah +neutrik xlr a +0 +4 +4 +Connector_Audio +Jack_XLR_Neutrik_NC3MAMH-PH_Horizontal +A Series, Chassis connector Phoenix H male (A series layout), mates with Phoenix MSTB 2,5/3-ST, horizontal PCB mount, https://www.neutrik.com/en/product/nc3mamh-ph +neutrik xlr a +0 +3 +3 +Connector_Audio +Jack_XLR_Neutrik_NC3MAV-0_Vertical +A Series, 3 pole male XLR receptacle, grounding: ground contact connected to shell ground, but not to front panel and Pin 1, vertical PCB mount, https://www.neutrik.com/en/product/nc3mav-0 +neutrik xlr a +0 +4 +4 +Connector_Audio +Jack_XLR_Neutrik_NC3MAV_Vertical +A Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc3mav +neutrik xlr a +0 +4 +4 +Connector_Audio +Jack_XLR_Neutrik_NC3MBH-0_Horizontal +B Series, 3 pole male XLR receptacle, grounding: ground contact connected to shell ground, but not to front panel and Pin 1, steel retention lug, horizontal PCB mount, https://www.neutrik.com/en/product/nc3mbh-0 +neutrik xlr b +0 +4 +4 +Connector_Audio +Jack_XLR_Neutrik_NC3MBH-1_Horizontal +B Series, 3 pole male XLR receptacle, grounding: mating connector shell to pin1 and front panel, steel retention lug, horizontal PCB mount, https://www.neutrik.com/en/product/nc3mbh-1 +neutrik xlr b +0 +3 +3 +Connector_Audio +Jack_XLR_Neutrik_NC3MBH-B_Horizontal +B Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, steel retention lug, horizontal PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc3mbh-b +neutrik xlr b +0 +4 +4 +Connector_Audio +Jack_XLR_Neutrik_NC3MBH-E_Horizontal +B Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, steel retention lug, horizontal PCB mount, additional ground contacts, https://www.neutrik.com/en/product/nc3mbh-e +neutrik xlr b +0 +4 +4 +Connector_Audio +Jack_XLR_Neutrik_NC3MBHL-B_Horizontal +B Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, steel retention lug, lateral left PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc3mbhl-b +neutrik xlr b +0 +4 +4 +Connector_Audio +Jack_XLR_Neutrik_NC3MBHL_Horizontal +B Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, steel retention lug, lateral left PCB mount, https://www.neutrik.com/en/product/nc3mbhl +neutrik xlr b +0 +4 +4 +Connector_Audio +Jack_XLR_Neutrik_NC3MBHR-B_Horizontal +B Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, steel retention lug, lateral right PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc3mbhr-b +neutrik xlr b +0 +4 +4 +Connector_Audio +Jack_XLR_Neutrik_NC3MBHR_Horizontal +B Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, steel retention lug, lateral right PCB mount, https://www.neutrik.com/en/product/nc3mbhr +neutrik xlr b +0 +4 +4 +Connector_Audio +Jack_XLR_Neutrik_NC3MBH_Horizontal +B Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, steel retention lug, horizontal PCB mount, https://www.neutrik.com/en/product/nc3mbh +neutrik xlr b +0 +4 +4 +Connector_Audio +Jack_XLR_Neutrik_NC3MBV-0_Vertical +B Series, 3 pole male XLR receptacle, grounding: ground contact connected to shell ground, but not to front panel and Pin 1, steel retention lug, vertical PCB mount, https://www.neutrik.com/en/product/nc3mbv-0 +neutrik xlr b +0 +4 +4 +Connector_Audio +Jack_XLR_Neutrik_NC3MBV-1_Vertical +B Series, 3 pole male XLR receptacle, grounding: mating connector shell to pin1 and front panel, steel retention lug, vertical PCB mount, https://www.neutrik.com/en/product/nc3mbv-1 +neutrik xlr b +0 +3 +3 +Connector_Audio +Jack_XLR_Neutrik_NC3MBV-B_Vertical +B Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, steel retention lug, vertical PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc3mbv-b +neutrik xlr b +0 +4 +4 +Connector_Audio +Jack_XLR_Neutrik_NC3MBV-E_Vertical +B Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, steel retention lug, vertical PCB mount, additional ground contacts, https://www.neutrik.com/en/product/nc3mbv-e +neutrik xlr b +0 +4 +4 +Connector_Audio +Jack_XLR_Neutrik_NC3MBV-SW_Vertical +B Series, 3 pole male XLR receptacle, switching contacts, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc3mbv-sw +neutrik xlr b +0 +7 +7 +Connector_Audio +Jack_XLR_Neutrik_NC3MBV_Vertical +B Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, steel retention lug, vertical PCB mount, https://www.neutrik.com/en/product/nc3mbv +neutrik xlr b +0 +4 +4 +Connector_Audio +Jack_XLR_Neutrik_NC4FAH-0_Horizontal +A Series, 4 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc4fah-0 +neutrik xlr a +0 +5 +5 +Connector_Audio +Jack_XLR_Neutrik_NC4FAH_Horizontal +A Series, 4 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc4fah +neutrik xlr a +0 +5 +5 +Connector_Audio +Jack_XLR_Neutrik_NC4FAV-0_Vertical +A Series, 4 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc4fav-0 +neutrik xlr a +0 +5 +5 +Connector_Audio +Jack_XLR_Neutrik_NC4FAV_Vertical +A Series, 4 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc4fav +neutrik xlr a +0 +5 +5 +Connector_Audio +Jack_XLR_Neutrik_NC4FBH_Horizontal +B Series, 4 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc4fbh +neutrik xlr b +0 +5 +5 +Connector_Audio +Jack_XLR_Neutrik_NC4FBV_Vertical +B Series, 4 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc4fbv +neutrik xlr b +0 +5 +5 +Connector_Audio +Jack_XLR_Neutrik_NC4MAH_Horizontal +A Series, 4 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc4mah +neutrik xlr a +0 +5 +5 +Connector_Audio +Jack_XLR_Neutrik_NC4MAV_Vertical +A Series, 4 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc4mav +neutrik xlr a +0 +5 +5 +Connector_Audio +Jack_XLR_Neutrik_NC4MBH_Horizontal +B Series, 4 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc4mbh +neutrik xlr b +0 +5 +5 +Connector_Audio +Jack_XLR_Neutrik_NC4MBV_Vertical +B Series, 4 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc4mbv +neutrik xlr b +0 +5 +5 +Connector_Audio +Jack_XLR_Neutrik_NC5FAH-0_Horizontal +A Series, 5 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc5fah-0 +neutrik xlr a +0 +6 +6 +Connector_Audio +Jack_XLR_Neutrik_NC5FAH-DA_Horizontal +A Series, 5 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mount, asymmetric push, https://www.neutrik.com/en/product/nc5fah-da +neutrik xlr a +0 +6 +6 +Connector_Audio +Jack_XLR_Neutrik_NC5FAH_Horizontal +A Series, 5 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc5fah +neutrik xlr a +0 +6 +6 +Connector_Audio +Jack_XLR_Neutrik_NC5FAV-DA_Vertical +A Series, 5 pole female XLR receptacle, grounding: mating connector shell to pin1 and front panel, horizontal PCB mount, asymmetric push, https://www.neutrik.com/en/product/nc5fav-da +neutrik xlr a +0 +6 +6 +Connector_Audio +Jack_XLR_Neutrik_NC5FAV-SW_Vertical +A Series, 5 pole female XLR receptacle, switching contacts, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, color coding possible, https://www.neutrik.com/en/product/nc5fav-sw +neutrik xlr a +0 +9 +9 +Connector_Audio +Jack_XLR_Neutrik_NC5FAV_Vertical +A Series, 5 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc5fav +neutrik xlr a +0 +6 +6 +Connector_Audio +Jack_XLR_Neutrik_NC5FBH-B_Horizontal +B Series, 5 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc5fbh-b +neutrik xlr b +0 +6 +6 +Connector_Audio +Jack_XLR_Neutrik_NC5FBH_Horizontal +B Series, 5 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc5fbh +neutrik xlr b +0 +6 +6 +Connector_Audio +Jack_XLR_Neutrik_NC5FBV-B_Vertical +B Series, 5 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc5fbv-b +neutrik xlr b +0 +6 +6 +Connector_Audio +Jack_XLR_Neutrik_NC5FBV-SW_Vertical +B Series, 5 pole female XLR receptacle, switching contacts, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc5fbv-sw +neutrik xlr b +0 +9 +9 +Connector_Audio +Jack_XLR_Neutrik_NC5FBV_Vertical +B Series, 5 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc5fbv +neutrik xlr b +0 +6 +6 +Connector_Audio +Jack_XLR_Neutrik_NC5MAH_Horizontal +A Series, 5 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc5mah +neutrik xlr a +0 +6 +6 +Connector_Audio +Jack_XLR_Neutrik_NC5MAV-SW_Vertical +A Series, 5 pole male XLR receptacle, switching contacts, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc5mav-sw +neutrik xlr a +0 +9 +9 +Connector_Audio +Jack_XLR_Neutrik_NC5MAV_Vertical +A Series, 5 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc5mav +neutrik xlr a +0 +6 +6 +Connector_Audio +Jack_XLR_Neutrik_NC5MBH-B_Horizontal +B Series, 5 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc5mbh-b +neutrik xlr b +0 +6 +6 +Connector_Audio +Jack_XLR_Neutrik_NC5MBH_Horizontal +B Series, 5 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc5mbh +neutrik xlr b +0 +6 +6 +Connector_Audio +Jack_XLR_Neutrik_NC5MBV-B_Vertical +B Series, 5 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc5mbv-b +neutrik xlr b +0 +6 +6 +Connector_Audio +Jack_XLR_Neutrik_NC5MBV-SW_Vertical +B Series, 5 pole male XLR receptacle, switching contacts, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc5mbv-sw +neutrik xlr b +0 +9 +9 +Connector_Audio +Jack_XLR_Neutrik_NC5MBV_Vertical +B Series, 5 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc5mbv +neutrik xlr b +0 +6 +6 +Connector_Audio +Jack_speakON-6.35mm_Neutrik_NLJ2MDXX-H_Horizontal +speakON Combo, 2 pole combination of speakON socket and 6.35mm (1/4in) jack receptacle, horizontal pcb mount, replaces NLJ2MD-H, https://www.neutrik.com/en/product/nlj2mdxx-h +neutrik speakon combo +0 +2 +2 +Connector_Audio +Jack_speakON-6.35mm_Neutrik_NLJ2MDXX-V_Vertical +speakON Combo, 2 pole combination of speakON socket and 6.35mm (1/4in) jack receptacle, vertical pcb mount, replaces NLJ2MD-V, https://www.neutrik.com/en/product/nlj2mdxx-v +neutrik speakon combo +0 +2 +2 +Connector_Audio +Jack_speakON_Neutrik_NL2MDXX-H-3_Horizontal +speakON Chassis Connectors, 2 pole chassis connector, gray D-size flange, countersunk thru holes, horizontal PCB, replaces NL2MD-H, https://www.neutrik.com/en/product/nl2mdxx-h-3 +neutrik speakon +0 +2 +2 +Connector_Audio +Jack_speakON_Neutrik_NL2MDXX-V_Vertical +speakON Chassis Connectors, 2 pole chassis connector, black D-size flange, countersunk thru holes, vertical PCB mount, replaces NL2MD-V, https://www.neutrik.com/en/product/nl2mdxx-v +neutrik speakon +0 +2 +2 +Connector_Audio +Jack_speakON_Neutrik_NL4MDXX-H-2_Horizontal +speakON Chassis Connectors, 4 pole chassis connector, black D-size flange, mirrored self tapping screw holes (A-screw), horizontal PCB mount, replaces NL4MD-H-2, https://www.neutrik.com/en/product/nl4mdxx-h-2 +neutrik speakon +0 +4 +4 +Connector_Audio +Jack_speakON_Neutrik_NL4MDXX-H-3_Horizontal +speakON Chassis Connectors, 4 pole chassis connector, grey D-size flange, self tapping screw holes (A-screw), horizontal PCB mount, replaces NL4MD-H, NL4MD-H-1, NL4MD-H-3, https://www.neutrik.com/en/product/nl4mdxx-h-3 +neutrik speakon +0 +4 +4 +Connector_Audio +Jack_speakON_Neutrik_NL4MDXX-V-2_Vertical +speakON Chassis Connectors, 4 pole chassis connector, black D-size flange, mirrored self tapping screw holes (A-screw), vertical PCB mount, replaces NL4MD-V-2, https://www.neutrik.com/en/product/nl4mdxx-v-2 +neutrik speakon +0 +4 +4 +Connector_Audio +Jack_speakON_Neutrik_NL4MDXX-V-3_Vertical +speakON Chassis Connectors, 4 pole chassis connector, grey D-size flange, self tapping screw holes (A-screw), vertical PCB mount, replaces NL4MD-V-1, https://www.neutrik.com/en/product/nl4mdxx-v-3 +neutrik speakon +0 +4 +4 +Connector_Audio +Jack_speakON_Neutrik_NL4MDXX-V_Vertical +speakON Chassis Connectors, 4 pole chassis connector, black D-size flange, countersunk thru holes, vertical PCB mount, replaces NL4MD-V, NL4MD-V-R, NL4MD-V-S, https://www.neutrik.com/en/product/nl4mdxx-v +neutrik speakon +0 +4 +4 +Connector_Audio +Jack_speakON_Neutrik_NL8MDXX-V-3_Vertical +speakON Chassis Connectors, 8 pole chassis connector, nickel metal square G-size flange, self tapping screw holes (A-screw), vertical PCB mount, replaces NL8MD-V-1, https://www.neutrik.com/en/product/nl8mdxx-v-3 +neutrik speakon +0 +8 +8 +Connector_Audio +Jack_speakON_Neutrik_NL8MDXX-V_Vertical +speakON Chassis Connectors, 8 pole chassis connector, nickel metal square G-size flange, countersunk thru holes, vertical PCB mount, replaces NL8MD-V, https://www.neutrik.com/en/product/nl8mdxx-v +neutrik speakon +0 +8 +8 +Connector_Audio +Jack_speakON_Neutrik_NLT4MD-V_Vertical +STX Series, 4 pole male chassis connector, metal housing, vertical PCB mount, self tapping screw holes (A-screw), https://www.neutrik.com/en/product/nlt4md-v +neutrik speakon stx +0 +4 +4 +Connector_Audio +MiniXLR-5_Switchcraft_TRAPC_Horizontal +http://www.switchcraft.com/ProductSummary.aspx?Parent=620 http://www.switchcraft.com/Drawings/TRAPC_X-TRASM_X_SERIES_CD.PDF +THT Mini XLR 5Pin right angle +0 +5 +5 +Connector_Audio +Plug_3.5mm_CUI_SP-3541 +4 contacts, 3.5mm audio plug, https://www.cuidevices.com/product/resource/pdf/sp-3541.pdf +3.5mm plug TRRS +0 +4 +4 +Connector_BarrelJack +BarrelJack_CLIFF_FC681465S_SMT_Horizontal +Surface-mount DC Barrel Jack, https://www.cliffuk.co.uk/products/dcconnectors/FC681465S.pdf +Power Jack SMT +0 +4 +3 +Connector_BarrelJack +BarrelJack_CUI_PJ-036AH-SMT_Horizontal +Surface-mount DC Barrel Jack, http://www.cui.com/product/resource/pj-036ah-smt.pdf +Power Jack SMT +0 +3 +3 +Connector_BarrelJack +BarrelJack_CUI_PJ-063AH_Horizontal +Barrel Jack, 2.0mm ID, 5.5mm OD, 24V, 8A, no switch, https://www.cui.com/product/resource/pj-063ah.pdf +barrel jack cui dc power +0 +4 +3 +Connector_BarrelJack +BarrelJack_CUI_PJ-063AH_Horizontal_CircularHoles +Barrel Jack, 2.0mm ID, 5.5mm OD, 24V, 8A, no switch, https://www.cui.com/product/resource/pj-063ah.pdf +barrel jack cui dc power +0 +4 +3 +Connector_BarrelJack +BarrelJack_CUI_PJ-079BH_Horizontal +Barrel Jack, 2.5mm ID, 5.5mm OD, 24V, 5A, switch, https://www.cui.com/product/resource/pj-079bh.pdf +barrel jack cui dc power +0 +5 +4 +Connector_BarrelJack +BarrelJack_CUI_PJ-102AH_Horizontal +Thin-pin DC Barrel Jack, https://cdn-shop.adafruit.com/datasheets/21mmdcjackDatasheet.pdf +Power Jack +0 +3 +3 +Connector_BarrelJack +BarrelJack_GCT_DCJ200-10-A_Horizontal +Barrel jack connector (5.5 mm outer diameter, 2.05 inner diameter ), https://gct.co/files/drawings/dcj200-10.pdf +connector barrel jack +0 +3 +3 +Connector_BarrelJack +BarrelJack_Horizontal +DC Barrel Jack +Power Jack +0 +3 +3 +Connector_BarrelJack +BarrelJack_Kycon_KLDX-0202-xC_Horizontal +DC Barrel Jack 2mm or 2.5mm center pin, https://www.kycon.com/Pub_Eng_Draw/KLDX-0202-AC%20&%20BC.pdf +power jack 2mm 2.5mm KLDX-0202-BC KLDX-0202-AC +0 +3 +3 +Connector_BarrelJack +BarrelJack_SwitchcraftConxall_RAPC10U_Horizontal +DC Power Jack, 13A, 24V, Panel Mount,Through-hole, https://www.switchcraft.com/Drawings/RAPC10U_CD.pdf +barreljack switchcraftconxall dc power +0 +2 +2 +Connector_BarrelJack +BarrelJack_Wuerth_694106106102_2.0x5.5mm +Wuerth Elektronik 694106106102 Barrel Jack, 2.0x5.5mm, https://www.we-online.com/components/products/datasheet/694106106102.pdf +barrel jack Wuerth Elektronik 694106106102 +0 +4 +3 +Connector_BarrelJack +BarrelJack_Wuerth_694108106102_2.5x5.5mm +Wuerth Elektronik 694108106102 Barrel Jack, 2.5x5.5mm, https://www.we-online.com/components/products/datasheet/694106106102.pdf +barrel jack Wuerth Elektronik 694108106102 +0 +4 +3 +Connector_BarrelJack +BarrelJack_Wuerth_6941xx301002 +Wuerth electronics barrel jack connector (5.5mm outher diameter, inner diameter 2.05mm or 2.55mm depending on exact order number), See: http://katalog.we-online.de/em/datasheet/6941xx301002.pdf +connector barrel jack +0 +3 +3 +Connector_Card +CF-Card_3M_N7E50-A516xx-30 +Compact Flash Card connector, polarization inverse (https://multimedia.3m.com/mws/media/22424O/3mtm-cf-card-header-type-i-low-profile-surface-mount-ts0747.pdf) +connector cf +0 +54 +50 +Connector_Card +CF-Card_3M_N7E50-E516xx-30 +Compact Flash Card connector, normal polarization (https://multimedia.3m.com/mws/media/22424O/3mtm-cf-card-header-type-i-low-profile-surface-mount-ts0747.pdf) +connector cf +0 +54 +50 +Connector_Card +SD_Hirose_DM1AA_SF_PEJ82 +SD, SMD, top-mount, push-push (https://www.hirose.com/product/document?clcode=CL0609-0004-8-82&productname=DM1AA-SF-PEJ(82)&series=DM1&documenttype=2DDrawing&lang=en&documentid=0000915301) +SD card connector +0 +16 +13 +Connector_Card +SD_Kyocera_145638009211859+ +SD Card Connector, Normal Type, Outer Tail, Without Ejector (https://global.kyocera.com/prdct/electro/product/pdf/5638.pdf) +sd card smt +0 +13 +13 +Connector_Card +SD_Kyocera_145638009511859+ +SD Card Connector, Normal Type, Outer Tail, Spring Eject Type (https://global.kyocera.com/prdct/electro/product/pdf/5638.pdf) +sd card smt +0 +13 +13 +Connector_Card +SD_Kyocera_145638109211859+ +SD Card Connector, Reverse Type, Outer Tail, Without Ejector (https://global.kyocera.com/prdct/electro/product/pdf/5638.pdf) +sd card smt +0 +13 +13 +Connector_Card +SD_Kyocera_145638109511859+ +SD Card Connector, Reverse Type, Outer Tail, Spring Eject Type (https://global.kyocera.com/prdct/electro/product/pdf/5638.pdf) +sd card smt +0 +13 +13 +Connector_Card +SD_TE_2041021 +SD card connector, top mount, SMT (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F2041021%7FB%7Fpdf%7FEnglish%7FENG_CD_2041021_B_C_2041021_B.pdf%7F2041021-4) +sd card +0 +15 +12 +Connector_Card +microSD_HC_Hirose_DM3AT-SF-PEJM5 +Micro SD, SMD, right-angle, push-pull (https://www.hirose.com/product/en/download_file/key_name/DM3AT-SF-PEJM5/category/Drawing%20(2D)/doc_file_id/44099/?file_category_id=6&item_id=06090031000&is_series=) +Micro SD +0 +14 +11 +Connector_Card +microSD_HC_Hirose_DM3BT-DSF-PEJS +Micro SD, SMD, reverse on-board, right-angle, push-pull (https://www.hirose.com/product/en/download_file/key_name/DM3BT-DSF-PEJS/category/Drawing%20(2D)/doc_file_id/44097/?file_category_id=6&item_id=06090029900&is_series=) +Micro SD +0 +16 +11 +Connector_Card +microSD_HC_Hirose_DM3D-SF +Micro SD, SMD, right-angle, push-pull (https://media.digikey.com/PDF/Data%20Sheets/Hirose%20PDFs/DM3D-SF.pdf) +Micro SD +0 +14 +11 +Connector_Card +microSD_HC_Molex_47219-2001 +1.10mm Pitch microSD Card Connector, Hinge Type, https://www.molex.com/pdm_docs/sd/472192001_sd.pdf +Micro SD +0 +12 +9 +Connector_Card +microSD_HC_Molex_104031-0811 +1.10mm Pitch microSD Memory Card Connector, Surface Mount, Push-Pull Type, 1.42mm Height, with Detect Switch (https://www.molex.com/pdm_docs/sd/1040310811_sd.pdf) +microSD SD molex +0 +14 +11 +Connector_Card +microSD_HC_Wuerth_693072010801 +http://katalog.we-online.de/em/datasheet/693072010801.pdf +Micro SD Wuerth Wurth Würth +0 +12 +9 +Connector_Card +microSIM_JAE_SF53S006VCBR2000 +micro SIM card connector, 6pos., 1.45mm height, Push-pull type, https://www.jae.com/direct/topics/topics_file_download/topics_id=68883&ext_no=06 +microSIM GSM Card +0 +14 +7 +Connector_Coaxial +BNC_Amphenol_031-5539_Vertical +BNC coaxial connector vertical, Amphenol 031-71059, https://www.amphenolrf.com/library/download/link/link_id/594427/parent/031-5539/ +BNC Amphenol Vertical +0 +4 +2 +Connector_Coaxial +BNC_Amphenol_031-6575_Horizontal +dual independently isolated BNC plug (https://www.amphenolrf.com/downloads/dl/file/id/2980/product/644/031_6575_customer_drawing.pdf) +Dual BNC Amphenol Horizontal +0 +6 +4 +Connector_Coaxial +BNC_Amphenol_B6252HB-NPP3G-50_Horizontal +http://www.farnell.com/datasheets/612848.pdf +BNC Amphenol Horizontal +0 +4 +2 +Connector_Coaxial +BNC_PanelMountable_Vertical +Panel-mountable BNC connector mounted through PCB, vertical +BNC connector +0 +2 +2 +Connector_Coaxial +BNC_TEConnectivity_1478035_Horizontal +BNC RF Interface, PCB mount 4 pin, Right Angle, Bayonet, 50Ohm, 4GHz, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1478035%7FB1%7Fpdf%7FEnglish%7FENG_CD_1478035_B1.pdf%7F1-1478035-0 +BNC RF interface bayonet 50ohm +0 +5 +2 +Connector_Coaxial +BNC_TEConnectivity_1478204_Vertical +BNC female PCB mount 4 pin straight chassis connector http://www.te.com/usa-en/product-1-1478204-0.html +BNC female PCB mount 4 pin straight chassis connector +0 +5 +2 +Connector_Coaxial +BNC_Win_364A2x95_Horizontal +Dual front isolated BNC plug (https://www.winconn.com/wp-content/uploads/364A2595.pdf) +Dual BNC Horizontal Isolated +0 +6 +3 +Connector_Coaxial +CoaxialSwitch_Hirose_MS-156C3_Horizontal +Subminiature Coaxial Switch 1.35mm High, DC to 11GHz +Switch Coaxial RF +0 +12 +3 +Connector_Coaxial +MMCX_Molex_73415-0961_Horizontal_0.8mm-PCB +Molex MMCX Horizontal Coaxial https://www.molex.com/pdm_docs/sd/734150961_sd.pdf +Molex MMCX Horizontal Coaxial +0 +3 +2 +Connector_Coaxial +MMCX_Molex_73415-0961_Horizontal_1.0mm-PCB +Molex MMCX Horizontal Coaxial https://www.molex.com/pdm_docs/sd/734150961_sd.pdf +Molex MMCX Horizontal Coaxial +0 +3 +2 +Connector_Coaxial +MMCX_Molex_73415-0961_Horizontal_1.6mm-PCB +Molex MMCX Horizontal Coaxial https://www.molex.com/pdm_docs/sd/734150961_sd.pdf +Molex MMCX Horizontal Coaxial +0 +3 +2 +Connector_Coaxial +MMCX_Molex_73415-1471_Vertical +http://www.molex.com/pdm_docs/sd/734151471_sd.pdf +Molex MMCX Coaxial Connector 50 ohms Female Jack Vertical THT +0 +5 +2 +Connector_Coaxial +SMA_Amphenol_901-143_Horizontal + Amphenol RF 901-143 https://www.amphenolrf.com/library/download/link/link_id/585682 +SMA THT Female Jack Horizontal +0 +5 +2 +Connector_Coaxial +SMA_Amphenol_901-144_Vertical +https://www.amphenolrf.com/downloads/dl/file/id/7023/product/3103/901_144_customer_drawing.pdf +SMA THT Female Jack Vertical +0 +5 +2 +Connector_Coaxial +SMA_Amphenol_132134-10_Vertical +https://www.amphenolrf.com/downloads/dl/file/id/4007/product/2974/132134_10_customer_drawing.pdf +SMA SMD Female Jack Vertical +0 +3 +2 +Connector_Coaxial +SMA_Amphenol_132134-11_Vertical +https://www.amphenolrf.com/downloads/dl/file/id/3406/product/2975/132134_11_customer_drawing.pdf +SMA THT Female Jack Vertical ExtendedLegs +0 +5 +2 +Connector_Coaxial +SMA_Amphenol_132134-14_Vertical +https://www.amphenolrf.com/downloads/dl/file/id/1793/product/2976/132134_14_customer_drawing.pdf +SMA THT Female Jack Vertical ExtendedLegs +0 +5 +2 +Connector_Coaxial +SMA_Amphenol_132134-16_Vertical +https://www.amphenolrf.com/downloads/dl/file/id/1141/product/2978/132134_16_customer_drawing.pdf +SMA THT Female Jack Vertical ExtendedLegs +0 +5 +2 +Connector_Coaxial +SMA_Amphenol_132134_Vertical +https://www.amphenolrf.com/downloads/dl/file/id/2187/product/2843/132134_customer_drawing.pdf +SMA THT Female Jack Vertical ExtendedLegs +0 +5 +2 +Connector_Coaxial +SMA_Amphenol_132203-12_Horizontal +https://www.amphenolrf.com/media/downloads/1769/132203-12.pdf +SMA THT Female Jack Horizontal +0 +5 +2 +Connector_Coaxial +SMA_Amphenol_132289_EdgeMount +http://www.amphenolrf.com/132289.html +SMA +0 +5 +2 +Connector_Coaxial +SMA_Amphenol_132291-12_Vertical +https://www.amphenolrf.com/downloads/dl/file/id/1688/product/3020/132291_12_customer_drawing.pdf +SMA THT Female Jack Vertical Bulkhead +0 +5 +2 +Connector_Coaxial +SMA_Amphenol_132291_Vertical +https://www.amphenolrf.com/downloads/dl/file/id/3222/product/2918/132291_customer_drawing.pdf +SMA THT Female Jack Vertical Bulkhead +0 +5 +2 +Connector_Coaxial +SMA_Molex_73251-1153_EdgeMount_Horizontal +Molex SMA RF Connectors, Edge Mount, (http://www.molex.com/pdm_docs/sd/732511150_sd.pdf) +sma edge +0 +11 +2 +Connector_Coaxial +SMA_Molex_73251-2120_EdgeMount_Horizontal +Molex SMA RF Connector, Edge Mount, (http://www.molex.com/pdm_docs/sd/732512120_sd.pdf) +sma edge +0 +7 +2 +Connector_Coaxial +SMA_Molex_73251-2200_Horizontal +https://www.molex.com/webdocs/datasheets/pdf/en-us/0732512200_RF_COAX_CONNECTORS.pdf +SMA THT Female Jack Horizontal +0 +5 +2 +Connector_Coaxial +SMA_Samtec_SMA-J-P-X-ST-EM1_EdgeMount +Connector SMA, 0Hz to 20GHz, 50Ohm, Edge Mount (http://suddendocs.samtec.com/prints/sma-j-p-x-st-em1-mkt.pdf) +SMA Straight Samtec Edge Mount +0 +5 +2 +Connector_Coaxial +SMA_Wurth_60312102114405_Vertical +Würth WR-SMA PCB SMT Jack, Vertical (https://www.we-online.com/components/products/datasheet/60312102114405.pdf) +Coaxial Connector 50 ohms Female +0 +3 +2 +Connector_Coaxial +SMA_Wurth_60312002114503_Vertical +https://www.we-online.de/katalog/datasheet/60312002114503.pdf +SMA THT Female Jack Vertical ExtendedLegs +0 +5 +2 +Connector_Coaxial +SMB_Jack_Vertical +SMB pcb mounting jack +SMB Jack Striaght +0 +5 +2 +Connector_Coaxial +U.FL_Hirose_U.FL-R-SMT-1_Vertical +Hirose U.FL Coaxial https://www.hirose.com/product/en/products/U.FL/U.FL-R-SMT-1%2810%29/ +Hirose U.FL Coaxial +0 +3 +2 +Connector_Coaxial +U.FL_Molex_MCRF_73412-0110_Vertical +Molex Microcoaxial RF Connectors (MCRF), mates Hirose U.FL, (http://www.molex.com/pdm_docs/sd/734120110_sd.pdf) +mcrf hirose ufl u.fl microcoaxial +0 +4 +2 +Connector_Coaxial +WR-MMCX_Wuerth_66012102111404_Vertical +Würth WR-MMCX PCB SMT Jack, Vertical (https://www.we-online.com/components/products/datasheet/66012102111404.pdf) +Coaxial Connector 50 ohms Female +0 +3 +2 +Connector_Coaxial +WR-MMCX_Wuerth_66011102111302_Horizontal +Würth WR-MMCX PCB SMT Jack, Horizontal (https://www.we-online.com/components/products/datasheet/66011102111302.pdf) +Coaxial Connector 50 ohms Female +0 +7 +2 +Connector_DIN +DIN41612_B2_2x8_Female_Vertical_THT +DIN41612 connector, type B/2, Vertical, 2 rows 16 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 B/2 +0 +16 +16 +Connector_DIN +DIN41612_B2_2x8_Male_Horizontal_THT +DIN41612 connector, type B/2, Horizontal, 2 rows 16 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 B/2 +0 +16 +16 +Connector_DIN +DIN41612_B2_2x16_Female_Vertical_THT +DIN41612 connector, type B/2, Vertical, 2 rows 16 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 B/2 +0 +32 +32 +Connector_DIN +DIN41612_B2_2x16_Male_Horizontal_THT +DIN41612 connector, type B/2, Horizontal, 2 rows 16 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 B/2 +0 +32 +32 +Connector_DIN +DIN41612_B3_2x5_Female_Vertical_THT +DIN41612 connector, type B/3, Vertical, 2 rows 10 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 B/3 +0 +10 +10 +Connector_DIN +DIN41612_B3_2x5_Male_Horizontal_THT +DIN41612 connector, type B/3, Horizontal, 2 rows 10 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 B/3 +0 +10 +10 +Connector_DIN +DIN41612_B3_2x10_Female_Vertical_THT +DIN41612 connector, type B/3, Vertical, 2 rows 10 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 B/3 +0 +20 +20 +Connector_DIN +DIN41612_B3_2x10_Male_Horizontal_THT +DIN41612 connector, type B/3, Horizontal, 2 rows 10 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 B/3 +0 +20 +20 +Connector_DIN +DIN41612_B_1x32_Female_Vertical_THT +DIN41612 connector, type B, Vertical, 2 rows 32 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 B +0 +32 +32 +Connector_DIN +DIN41612_B_1x32_Male_Horizontal_THT +DIN41612 connector, type B, Horizontal, 2 rows 32 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 B +0 +32 +32 +Connector_DIN +DIN41612_B_2x16_Female_Vertical_THT +DIN41612 connector, type B, Vertical, 2 rows 32 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 B +0 +32 +32 +Connector_DIN +DIN41612_B_2x16_Male_Horizontal_THT +DIN41612 connector, type B, Horizontal, 2 rows 32 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 B +0 +32 +32 +Connector_DIN +DIN41612_B_2x32_Female_Vertical_THT +DIN41612 connector, type B, Vertical, 2 rows 32 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 B +0 +64 +64 +Connector_DIN +DIN41612_B_2x32_Male_Horizontal_THT +DIN41612 connector, type B, Horizontal, 2 rows 32 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 B +0 +64 +64 +Connector_DIN +DIN41612_C2_2x16_Female_Vertical_THT +DIN41612 connector, type C/2, Vertical, 3 rows 16 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 C/2 +0 +32 +32 +Connector_DIN +DIN41612_C2_2x16_Male_Horizontal_THT +DIN41612 connector, type C/2, Horizontal, 3 rows 16 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 C/2 +0 +32 +32 +Connector_DIN +DIN41612_C2_3x16_Female_Vertical_THT +DIN41612 connector, type C/2, Vertical, 3 rows 16 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 C/2 +0 +48 +48 +Connector_DIN +DIN41612_C2_3x16_Male_Horizontal_THT +DIN41612 connector, type C/2, Horizontal, 3 rows 16 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 C/2 +0 +48 +48 +Connector_DIN +DIN41612_C3_2x10_Female_Vertical_THT +DIN41612 connector, type C/3, Vertical, 3 rows 10 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 C/3 +0 +20 +20 +Connector_DIN +DIN41612_C3_2x10_Male_Horizontal_THT +DIN41612 connector, type C/3, Horizontal, 3 rows 10 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 C/3 +0 +20 +20 +Connector_DIN +DIN41612_C3_3x10_Female_Vertical_THT +DIN41612 connector, type C/3, Vertical, 3 rows 10 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 C/3 +0 +30 +30 +Connector_DIN +DIN41612_C3_3x10_Male_Horizontal_THT +DIN41612 connector, type C/3, Horizontal, 3 rows 10 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 C/3 +0 +30 +30 +Connector_DIN +DIN41612_C_1x32_Female_Vertical_THT +DIN41612 connector, type C, Vertical, 3 rows 32 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 C +0 +32 +32 +Connector_DIN +DIN41612_C_1x32_Male_Horizontal_THT +DIN41612 connector, type C, Horizontal, 3 rows 32 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 C +0 +32 +32 +Connector_DIN +DIN41612_C_2x16_Female_Vertical_THT +DIN41612 connector, type C, Vertical, 3 rows 32 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 C +0 +32 +32 +Connector_DIN +DIN41612_C_2x16_Male_Horizontal_THT +DIN41612 connector, type C, Horizontal, 3 rows 32 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 C +0 +32 +32 +Connector_DIN +DIN41612_C_2x32_Female_Vertical_THT +DIN41612 connector, type C, Vertical, 3 rows 32 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 C +0 +64 +64 +Connector_DIN +DIN41612_C_2x32_Male_Horizontal_THT +DIN41612 connector, type C, Horizontal, 3 rows 32 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 C +0 +64 +64 +Connector_DIN +DIN41612_C_3x16_Female_Vertical_THT +DIN41612 connector, type C, Vertical, 3 rows 32 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 C +0 +48 +48 +Connector_DIN +DIN41612_C_3x16_Male_Horizontal_THT +DIN41612 connector, type C, Horizontal, 3 rows 32 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 C +0 +48 +48 +Connector_DIN +DIN41612_C_3x32_Female_Vertical_THT +DIN41612 connector, type C, Vertical, 3 rows 32 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 C +0 +96 +96 +Connector_DIN +DIN41612_C_3x32_Male_Horizontal_THT +DIN41612 connector, type C, Horizontal, 3 rows 32 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 C +0 +96 +96 +Connector_DIN +DIN41612_D_2x8_Female_Vertical_THT +DIN41612 connector, type D, Vertical, 3 rows 32 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 D +0 +16 +16 +Connector_DIN +DIN41612_D_2x8_Male_Horizontal_THT +DIN41612 connector, type D, Horizontal, 3 rows 32 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 D +0 +16 +16 +Connector_DIN +DIN41612_D_2x16_Female_Vertical_THT +DIN41612 connector, type D, Vertical, 3 rows 32 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 D +0 +32 +32 +Connector_DIN +DIN41612_D_2x16_Male_Horizontal_THT +DIN41612 connector, type D, Horizontal, 3 rows 32 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 D +0 +32 +32 +Connector_DIN +DIN41612_E_2x16_Female_Vertical_THT +DIN41612 connector, type E, Vertical, 5 rows 32 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 E +0 +32 +32 +Connector_DIN +DIN41612_E_2x16_Male_Horizontal_THT +DIN41612 connector, type E, Horizontal, 5 rows 32 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 E +0 +32 +32 +Connector_DIN +DIN41612_E_2x16_RowsAC_Female_Vertical_THT +DIN41612 connector, type E, Vertical, 5 rows 32 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 E +0 +32 +32 +Connector_DIN +DIN41612_E_2x16_RowsAC_Male_Horizontal_THT +DIN41612 connector, type E, Horizontal, 5 rows 32 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 E +0 +32 +32 +Connector_DIN +DIN41612_E_3x16_Female_Vertical_THT +DIN41612 connector, type E, Vertical, 5 rows 32 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 E +0 +48 +48 +Connector_DIN +DIN41612_E_3x16_Male_Horizontal_THT +DIN41612 connector, type E, Horizontal, 5 rows 32 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 E +0 +48 +48 +Connector_DIN +DIN41612_F_2x16_Female_Vertical_THT +DIN41612 connector, type F, Vertical, 3 rows 32 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 F +0 +32 +32 +Connector_DIN +DIN41612_F_2x16_Male_Horizontal_THT +DIN41612 connector, type F, Horizontal, 3 rows 32 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 F +0 +32 +32 +Connector_DIN +DIN41612_F_2x16_RowsZD_Female_Vertical_THT +DIN41612 connector, type F, Vertical, 3 rows 32 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 F +0 +32 +32 +Connector_DIN +DIN41612_F_2x16_RowsZD_Male_Horizontal_THT +DIN41612 connector, type F, Horizontal, 3 rows 32 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 F +0 +32 +32 +Connector_DIN +DIN41612_F_3x16_Female_Vertical_THT +DIN41612 connector, type F, Vertical, 3 rows 32 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 F +0 +48 +48 +Connector_DIN +DIN41612_F_3x16_Male_Horizontal_THT +DIN41612 connector, type F, Horizontal, 3 rows 32 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 F +0 +48 +48 +Connector_DIN +DIN41612_Q2_2x16_Female_Horizontal_THT +DIN41612 connector, type Q/2, Horizontal, 2 rows 16 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 Q/2 +0 +32 +32 +Connector_DIN +DIN41612_Q2_2x16_Male_Vertical_THT +DIN41612 connector, type Q/2, Vertical, 2 rows 16 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 Q/2 +0 +32 +32 +Connector_DIN +DIN41612_Q3_2x10_Female_Horizontal_THT +DIN41612 connector, type Q/3, Horizontal, 2 rows 10 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 Q/3 +0 +20 +20 +Connector_DIN +DIN41612_Q3_2x10_Male_Vertical_THT +DIN41612 connector, type Q/3, Vertical, 2 rows 10 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 Q/3 +0 +20 +20 +Connector_DIN +DIN41612_Q_2x32_Female_Horizontal_THT +DIN41612 connector, type Q, Horizontal, 2 rows 32 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 Q +0 +64 +64 +Connector_DIN +DIN41612_Q_2x32_Male_Vertical_THT +DIN41612 connector, type Q, Vertical, 2 rows 32 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 Q +0 +64 +64 +Connector_DIN +DIN41612_R2_2x16_Female_Horizontal_THT +DIN41612 connector, type R/2, Horizontal, 3 rows 16 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 R/2 +0 +32 +32 +Connector_DIN +DIN41612_R2_2x16_Male_Vertical_THT +DIN41612 connector, type R/2, Vertical, 3 rows 16 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 R/2 +0 +32 +32 +Connector_DIN +DIN41612_R2_3x16_Female_Horizontal_THT +DIN41612 connector, type R/2, Horizontal, 3 rows 16 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 R/2 +0 +48 +48 +Connector_DIN +DIN41612_R2_3x16_Male_Vertical_THT +DIN41612 connector, type R/2, Vertical, 3 rows 16 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 R/2 +0 +48 +48 +Connector_DIN +DIN41612_R3_2x10_Female_Horizontal_THT +DIN41612 connector, type R/3, Horizontal, 3 rows 10 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 R/3 +0 +20 +20 +Connector_DIN +DIN41612_R3_2x10_Male_Vertical_THT +DIN41612 connector, type R/3, Vertical, 3 rows 10 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 R/3 +0 +20 +20 +Connector_DIN +DIN41612_R3_3x10_Female_Horizontal_THT +DIN41612 connector, type R/3, Horizontal, 3 rows 10 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 R/3 +0 +30 +30 +Connector_DIN +DIN41612_R3_3x10_Male_Vertical_THT +DIN41612 connector, type R/3, Vertical, 3 rows 10 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 R/3 +0 +30 +30 +Connector_DIN +DIN41612_R_1x32_Female_Horizontal_THT +DIN41612 connector, type R, Horizontal, 3 rows 32 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 R +0 +32 +32 +Connector_DIN +DIN41612_R_1x32_Male_Vertical_THT +DIN41612 connector, type R, Vertical, 3 rows 32 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 R +0 +32 +32 +Connector_DIN +DIN41612_R_2x16_Female_Horizontal_THT +DIN41612 connector, type R, Horizontal, 3 rows 32 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 R +0 +32 +32 +Connector_DIN +DIN41612_R_2x16_Male_Vertical_THT +DIN41612 connector, type R, Vertical, 3 rows 32 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 R +0 +32 +32 +Connector_DIN +DIN41612_R_2x32_Female_Horizontal_THT +DIN41612 connector, type R, Horizontal, 3 rows 32 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 R +0 +64 +64 +Connector_DIN +DIN41612_R_2x32_Male_Vertical_THT +DIN41612 connector, type R, Vertical, 3 rows 32 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 R +0 +64 +64 +Connector_DIN +DIN41612_R_3x16_Female_Horizontal_THT +DIN41612 connector, type R, Horizontal, 3 rows 32 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 R +0 +48 +48 +Connector_DIN +DIN41612_R_3x16_Male_Vertical_THT +DIN41612 connector, type R, Vertical, 3 rows 32 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 R +0 +48 +48 +Connector_DIN +DIN41612_R_3x32_Female_Horizontal_THT +DIN41612 connector, type R, Horizontal, 3 rows 32 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 R +0 +96 +96 +Connector_DIN +DIN41612_R_3x32_Male_Vertical_THT +DIN41612 connector, type R, Vertical, 3 rows 32 pins wide, https://www.erni-x-press.com/de/downloads/kataloge/englische_kataloge/erni-din41612-iec60603-2-e.pdf +DIN 41612 IEC 60603 R +0 +96 +96 +Connector_Dsub +DSUB-9_Female_EdgeMount_P2.77mm +9-pin D-Sub connector, solder-cups edge-mounted, female, x-pin-pitch 2.77mm, distance of mounting holes 25mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +9-pin D-Sub connector edge mount solder cup female x-pin-pitch 2.77mm mounting holes distance 25mm +0 +9 +9 +Connector_Dsub +DSUB-9_Female_Horizontal_P2.77x2.54mm_EdgePinOffset9.40mm +9-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.77x2.54mm, pin-PCB-offset 9.4mm, see http://docs-europe.electrocomponents.com/webdocs/1585/0900766b81585df2.pdf +9-pin D-Sub connector horizontal angled 90deg THT female pitch 2.77x2.54mm pin-PCB-offset 9.4mm +0 +9 +9 +Connector_Dsub +DSUB-9_Female_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset7.48mm +9-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.77x2.84mm, pin-PCB-offset 4.9399999999999995mm, distance of mounting holes 25mm, distance of mounting holes to PCB edge 7.4799999999999995mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +9-pin D-Sub connector horizontal angled 90deg THT female pitch 2.77x2.84mm pin-PCB-offset 4.9399999999999995mm mounting-holes-distance 25mm mounting-hole-offset 25mm +0 +11 +10 +Connector_Dsub +DSUB-9_Female_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm +9-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.77x2.84mm, pin-PCB-offset 7.699999999999999mm, distance of mounting holes 25mm, distance of mounting holes to PCB edge 9.12mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +9-pin D-Sub connector horizontal angled 90deg THT female pitch 2.77x2.84mm pin-PCB-offset 7.699999999999999mm mounting-holes-distance 25mm mounting-hole-offset 25mm +0 +11 +10 +Connector_Dsub +DSUB-9_Female_Horizontal_P2.77x2.84mm_EdgePinOffset9.40mm +9-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.77x2.84mm, pin-PCB-offset 9.4mm, see http://docs-europe.electrocomponents.com/webdocs/1585/0900766b81585df2.pdf +9-pin D-Sub connector horizontal angled 90deg THT female pitch 2.77x2.84mm pin-PCB-offset 9.4mm +0 +9 +9 +Connector_Dsub +DSUB-9_Female_Horizontal_P2.77x2.84mm_EdgePinOffset9.90mm_Housed_MountingHolesOffset11.32mm +9-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.77x2.84mm, pin-PCB-offset 9.9mm, distance of mounting holes 25mm, distance of mounting holes to PCB edge 11.32mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +9-pin D-Sub connector horizontal angled 90deg THT female pitch 2.77x2.84mm pin-PCB-offset 9.9mm mounting-holes-distance 25mm mounting-hole-offset 25mm +0 +11 +10 +Connector_Dsub +DSUB-9_Female_Horizontal_P2.77x2.84mm_EdgePinOffset14.56mm_Housed_MountingHolesOffset8.20mm +9-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.77x2.84mm, pin-PCB-offset 14.56mm, distance of mounting holes 25mm, distance of mounting holes to PCB edge 8.2mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +9-pin D-Sub connector horizontal angled 90deg THT female pitch 2.77x2.84mm pin-PCB-offset 14.56mm mounting-holes-distance 25mm mounting-hole-offset 25mm +0 +11 +10 +Connector_Dsub +DSUB-9_Female_Horizontal_P2.77x2.84mm_EdgePinOffset14.56mm_Housed_MountingHolesOffset15.98mm +9-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.77x2.84mm, pin-PCB-offset 14.56mm, distance of mounting holes 25mm, distance of mounting holes to PCB edge 15.979999999999999mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +9-pin D-Sub connector horizontal angled 90deg THT female pitch 2.77x2.84mm pin-PCB-offset 14.56mm mounting-holes-distance 25mm mounting-hole-offset 25mm +0 +11 +10 +Connector_Dsub +DSUB-9_Female_Vertical_P2.77x2.84mm +9-pin D-Sub connector, straight/vertical, THT-mount, female, pitch 2.77x2.84mm, distance of mounting holes 25mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +9-pin D-Sub connector straight vertical THT female pitch 2.77x2.84mm mounting holes distance 25mm +0 +9 +9 +Connector_Dsub +DSUB-9_Female_Vertical_P2.77x2.84mm_MountingHoles +9-pin D-Sub connector, straight/vertical, THT-mount, female, pitch 2.77x2.84mm, distance of mounting holes 25mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +9-pin D-Sub connector straight vertical THT female pitch 2.77x2.84mm mounting holes distance 25mm +0 +11 +10 +Connector_Dsub +DSUB-9_Male_EdgeMount_P2.77mm +9-pin D-Sub connector, solder-cups edge-mounted, male, x-pin-pitch 2.77mm, distance of mounting holes 25mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +9-pin D-Sub connector edge mount solder cup male x-pin-pitch 2.77mm mounting holes distance 25mm +0 +9 +9 +Connector_Dsub +DSUB-9_Male_Horizontal_P2.77x2.54mm_EdgePinOffset9.40mm +9-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.77x2.54mm, pin-PCB-offset 9.4mm, see http://docs-europe.electrocomponents.com/webdocs/1585/0900766b81585df2.pdf +9-pin D-Sub connector horizontal angled 90deg THT male pitch 2.77x2.54mm pin-PCB-offset 9.4mm +0 +9 +9 +Connector_Dsub +DSUB-9_Male_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset7.48mm +9-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.77x2.84mm, pin-PCB-offset 4.9399999999999995mm, distance of mounting holes 25mm, distance of mounting holes to PCB edge 7.4799999999999995mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +9-pin D-Sub connector horizontal angled 90deg THT male pitch 2.77x2.84mm pin-PCB-offset 4.9399999999999995mm mounting-holes-distance 25mm mounting-hole-offset 25mm +0 +11 +10 +Connector_Dsub +DSUB-9_Male_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm +9-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.77x2.84mm, pin-PCB-offset 7.699999999999999mm, distance of mounting holes 25mm, distance of mounting holes to PCB edge 9.12mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +9-pin D-Sub connector horizontal angled 90deg THT male pitch 2.77x2.84mm pin-PCB-offset 7.699999999999999mm mounting-holes-distance 25mm mounting-hole-offset 25mm +0 +11 +10 +Connector_Dsub +DSUB-9_Male_Horizontal_P2.77x2.84mm_EdgePinOffset9.40mm +9-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.77x2.84mm, pin-PCB-offset 9.4mm, see http://docs-europe.electrocomponents.com/webdocs/1585/0900766b81585df2.pdf +9-pin D-Sub connector horizontal angled 90deg THT male pitch 2.77x2.84mm pin-PCB-offset 9.4mm +0 +9 +9 +Connector_Dsub +DSUB-9_Male_Horizontal_P2.77x2.84mm_EdgePinOffset9.90mm_Housed_MountingHolesOffset11.32mm +9-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.77x2.84mm, pin-PCB-offset 9.9mm, distance of mounting holes 25mm, distance of mounting holes to PCB edge 11.32mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +9-pin D-Sub connector horizontal angled 90deg THT male pitch 2.77x2.84mm pin-PCB-offset 9.9mm mounting-holes-distance 25mm mounting-hole-offset 25mm +0 +11 +10 +Connector_Dsub +DSUB-9_Male_Horizontal_P2.77x2.84mm_EdgePinOffset14.56mm_Housed_MountingHolesOffset8.20mm +9-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.77x2.84mm, pin-PCB-offset 14.56mm, distance of mounting holes 25mm, distance of mounting holes to PCB edge 8.2mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +9-pin D-Sub connector horizontal angled 90deg THT male pitch 2.77x2.84mm pin-PCB-offset 14.56mm mounting-holes-distance 25mm mounting-hole-offset 25mm +0 +11 +10 +Connector_Dsub +DSUB-9_Male_Horizontal_P2.77x2.84mm_EdgePinOffset14.56mm_Housed_MountingHolesOffset15.98mm +9-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.77x2.84mm, pin-PCB-offset 14.56mm, distance of mounting holes 25mm, distance of mounting holes to PCB edge 15.979999999999999mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +9-pin D-Sub connector horizontal angled 90deg THT male pitch 2.77x2.84mm pin-PCB-offset 14.56mm mounting-holes-distance 25mm mounting-hole-offset 25mm +0 +11 +10 +Connector_Dsub +DSUB-9_Male_Vertical_P2.77x2.84mm +9-pin D-Sub connector, straight/vertical, THT-mount, male, pitch 2.77x2.84mm, distance of mounting holes 25mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +9-pin D-Sub connector straight vertical THT male pitch 2.77x2.84mm mounting holes distance 25mm +0 +9 +9 +Connector_Dsub +DSUB-9_Male_Vertical_P2.77x2.84mm_MountingHoles +9-pin D-Sub connector, straight/vertical, THT-mount, male, pitch 2.77x2.84mm, distance of mounting holes 25mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +9-pin D-Sub connector straight vertical THT male pitch 2.77x2.84mm mounting holes distance 25mm +0 +11 +10 +Connector_Dsub +DSUB-15-HD_Female_Horizontal_P2.29x1.98mm_EdgePinOffset3.03mm_Housed_MountingHolesOffset4.94mm +15-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.29x1.98mm, pin-PCB-offset 3.0300000000000002mm, distance of mounting holes 25mm, distance of mounting holes to PCB edge 4.9399999999999995mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +15-pin D-Sub connector horizontal angled 90deg THT female pitch 2.29x1.98mm pin-PCB-offset 3.0300000000000002mm mounting-holes-distance 25mm mounting-hole-offset 25mm +0 +17 +16 +Connector_Dsub +DSUB-15-HD_Female_Horizontal_P2.29x1.98mm_EdgePinOffset8.35mm_Housed_MountingHolesOffset10.89mm +15-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.29x1.98mm, pin-PCB-offset 8.35mm, distance of mounting holes 25mm, distance of mounting holes to PCB edge 10.889999999999999mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +15-pin D-Sub connector horizontal angled 90deg THT female pitch 2.29x1.98mm pin-PCB-offset 8.35mm mounting-holes-distance 25mm mounting-hole-offset 25mm +0 +17 +16 +Connector_Dsub +DSUB-15-HD_Female_Horizontal_P2.29x1.98mm_EdgePinOffset9.40mm +15-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.29x1.98mm, pin-PCB-offset 9.4mm, see http://docs-europe.electrocomponents.com/webdocs/1585/0900766b81585df2.pdf +15-pin D-Sub connector horizontal angled 90deg THT female pitch 2.29x1.98mm pin-PCB-offset 9.4mm +0 +15 +15 +Connector_Dsub +DSUB-15-HD_Female_Horizontal_P2.29x2.54mm_EdgePinOffset9.40mm +15-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.29x2.54mm, pin-PCB-offset 9.4mm, see http://docs-europe.electrocomponents.com/webdocs/1585/0900766b81585df2.pdf +15-pin D-Sub connector horizontal angled 90deg THT female pitch 2.29x2.54mm pin-PCB-offset 9.4mm +0 +15 +15 +Connector_Dsub +DSUB-15-HD_Female_Vertical_P2.29x1.98mm_MountingHoles +15-pin D-Sub connector, straight/vertical, THT-mount, female, pitch 2.29x1.98mm, distance of mounting holes 25mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +15-pin D-Sub connector straight vertical THT female pitch 2.29x1.98mm mounting holes distance 25mm +0 +17 +16 +Connector_Dsub +DSUB-15-HD_Male_Horizontal_P2.29x1.98mm_EdgePinOffset3.03mm_Housed_MountingHolesOffset4.94mm +15-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.29x1.98mm, pin-PCB-offset 3.0300000000000002mm, distance of mounting holes 25mm, distance of mounting holes to PCB edge 4.9399999999999995mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +15-pin D-Sub connector horizontal angled 90deg THT male pitch 2.29x1.98mm pin-PCB-offset 3.0300000000000002mm mounting-holes-distance 25mm mounting-hole-offset 25mm +0 +17 +16 +Connector_Dsub +DSUB-15-HD_Male_Horizontal_P2.29x1.98mm_EdgePinOffset8.35mm_Housed_MountingHolesOffset10.89mm +15-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.29x1.98mm, pin-PCB-offset 8.35mm, distance of mounting holes 25mm, distance of mounting holes to PCB edge 10.889999999999999mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +15-pin D-Sub connector horizontal angled 90deg THT male pitch 2.29x1.98mm pin-PCB-offset 8.35mm mounting-holes-distance 25mm mounting-hole-offset 25mm +0 +17 +16 +Connector_Dsub +DSUB-15-HD_Male_Horizontal_P2.29x1.98mm_EdgePinOffset9.40mm +15-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.29x1.98mm, pin-PCB-offset 9.4mm, see http://docs-europe.electrocomponents.com/webdocs/1585/0900766b81585df2.pdf +15-pin D-Sub connector horizontal angled 90deg THT male pitch 2.29x1.98mm pin-PCB-offset 9.4mm +0 +15 +15 +Connector_Dsub +DSUB-15-HD_Male_Horizontal_P2.29x2.54mm_EdgePinOffset9.40mm +15-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.29x2.54mm, pin-PCB-offset 9.4mm, see http://docs-europe.electrocomponents.com/webdocs/1585/0900766b81585df2.pdf +15-pin D-Sub connector horizontal angled 90deg THT male pitch 2.29x2.54mm pin-PCB-offset 9.4mm +0 +15 +15 +Connector_Dsub +DSUB-15-HD_Male_Vertical_P2.29x1.98mm_MountingHoles +15-pin D-Sub connector, straight/vertical, THT-mount, male, pitch 2.29x1.98mm, distance of mounting holes 25mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +15-pin D-Sub connector straight vertical THT male pitch 2.29x1.98mm mounting holes distance 25mm +0 +17 +16 +Connector_Dsub +DSUB-15_Female_EdgeMount_P2.77mm +15-pin D-Sub connector, solder-cups edge-mounted, female, x-pin-pitch 2.77mm, distance of mounting holes 33.3mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +15-pin D-Sub connector edge mount solder cup female x-pin-pitch 2.77mm mounting holes distance 33.3mm +0 +15 +15 +Connector_Dsub +DSUB-15_Female_Horizontal_P2.77x2.54mm_EdgePinOffset9.40mm +15-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.77x2.54mm, pin-PCB-offset 9.4mm, see http://docs-europe.electrocomponents.com/webdocs/1585/0900766b81585df2.pdf +15-pin D-Sub connector horizontal angled 90deg THT female pitch 2.77x2.54mm pin-PCB-offset 9.4mm +0 +15 +15 +Connector_Dsub +DSUB-15_Female_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset7.48mm +15-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.77x2.84mm, pin-PCB-offset 4.9399999999999995mm, distance of mounting holes 33.3mm, distance of mounting holes to PCB edge 7.4799999999999995mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +15-pin D-Sub connector horizontal angled 90deg THT female pitch 2.77x2.84mm pin-PCB-offset 4.9399999999999995mm mounting-holes-distance 33.3mm mounting-hole-offset 33.3mm +0 +17 +16 +Connector_Dsub +DSUB-15_Female_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm +15-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.77x2.84mm, pin-PCB-offset 7.699999999999999mm, distance of mounting holes 33.3mm, distance of mounting holes to PCB edge 9.12mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +15-pin D-Sub connector horizontal angled 90deg THT female pitch 2.77x2.84mm pin-PCB-offset 7.699999999999999mm mounting-holes-distance 33.3mm mounting-hole-offset 33.3mm +0 +17 +16 +Connector_Dsub +DSUB-15_Female_Horizontal_P2.77x2.84mm_EdgePinOffset9.40mm +15-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.77x2.84mm, pin-PCB-offset 9.4mm, see http://docs-europe.electrocomponents.com/webdocs/1585/0900766b81585df2.pdf +15-pin D-Sub connector horizontal angled 90deg THT female pitch 2.77x2.84mm pin-PCB-offset 9.4mm +0 +15 +15 +Connector_Dsub +DSUB-15_Female_Horizontal_P2.77x2.84mm_EdgePinOffset9.90mm_Housed_MountingHolesOffset11.32mm +15-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.77x2.84mm, pin-PCB-offset 9.9mm, distance of mounting holes 33.3mm, distance of mounting holes to PCB edge 11.32mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +15-pin D-Sub connector horizontal angled 90deg THT female pitch 2.77x2.84mm pin-PCB-offset 9.9mm mounting-holes-distance 33.3mm mounting-hole-offset 33.3mm +0 +17 +16 +Connector_Dsub +DSUB-15_Female_Horizontal_P2.77x2.84mm_EdgePinOffset14.56mm_Housed_MountingHolesOffset8.20mm +15-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.77x2.84mm, pin-PCB-offset 14.56mm, distance of mounting holes 33.3mm, distance of mounting holes to PCB edge 8.2mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +15-pin D-Sub connector horizontal angled 90deg THT female pitch 2.77x2.84mm pin-PCB-offset 14.56mm mounting-holes-distance 33.3mm mounting-hole-offset 33.3mm +0 +17 +16 +Connector_Dsub +DSUB-15_Female_Horizontal_P2.77x2.84mm_EdgePinOffset14.56mm_Housed_MountingHolesOffset15.98mm +15-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.77x2.84mm, pin-PCB-offset 14.56mm, distance of mounting holes 33.3mm, distance of mounting holes to PCB edge 15.979999999999999mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +15-pin D-Sub connector horizontal angled 90deg THT female pitch 2.77x2.84mm pin-PCB-offset 14.56mm mounting-holes-distance 33.3mm mounting-hole-offset 33.3mm +0 +17 +16 +Connector_Dsub +DSUB-15_Female_Vertical_P2.77x2.84mm +15-pin D-Sub connector, straight/vertical, THT-mount, female, pitch 2.77x2.84mm, distance of mounting holes 33.3mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +15-pin D-Sub connector straight vertical THT female pitch 2.77x2.84mm mounting holes distance 33.3mm +0 +15 +15 +Connector_Dsub +DSUB-15_Female_Vertical_P2.77x2.84mm_MountingHoles +15-pin D-Sub connector, straight/vertical, THT-mount, female, pitch 2.77x2.84mm, distance of mounting holes 33.3mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +15-pin D-Sub connector straight vertical THT female pitch 2.77x2.84mm mounting holes distance 33.3mm +0 +17 +16 +Connector_Dsub +DSUB-15_Male_EdgeMount_P2.77mm +15-pin D-Sub connector, solder-cups edge-mounted, male, x-pin-pitch 2.77mm, distance of mounting holes 33.3mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +15-pin D-Sub connector edge mount solder cup male x-pin-pitch 2.77mm mounting holes distance 33.3mm +0 +15 +15 +Connector_Dsub +DSUB-15_Male_Horizontal_P2.77x2.54mm_EdgePinOffset9.40mm +15-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.77x2.54mm, pin-PCB-offset 9.4mm, see http://docs-europe.electrocomponents.com/webdocs/1585/0900766b81585df2.pdf +15-pin D-Sub connector horizontal angled 90deg THT male pitch 2.77x2.54mm pin-PCB-offset 9.4mm +0 +15 +15 +Connector_Dsub +DSUB-15_Male_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset7.48mm +15-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.77x2.84mm, pin-PCB-offset 4.9399999999999995mm, distance of mounting holes 33.3mm, distance of mounting holes to PCB edge 7.4799999999999995mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +15-pin D-Sub connector horizontal angled 90deg THT male pitch 2.77x2.84mm pin-PCB-offset 4.9399999999999995mm mounting-holes-distance 33.3mm mounting-hole-offset 33.3mm +0 +17 +16 +Connector_Dsub +DSUB-15_Male_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm +15-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.77x2.84mm, pin-PCB-offset 7.699999999999999mm, distance of mounting holes 33.3mm, distance of mounting holes to PCB edge 9.12mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +15-pin D-Sub connector horizontal angled 90deg THT male pitch 2.77x2.84mm pin-PCB-offset 7.699999999999999mm mounting-holes-distance 33.3mm mounting-hole-offset 33.3mm +0 +17 +16 +Connector_Dsub +DSUB-15_Male_Horizontal_P2.77x2.84mm_EdgePinOffset9.40mm +15-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.77x2.84mm, pin-PCB-offset 9.4mm, see http://docs-europe.electrocomponents.com/webdocs/1585/0900766b81585df2.pdf +15-pin D-Sub connector horizontal angled 90deg THT male pitch 2.77x2.84mm pin-PCB-offset 9.4mm +0 +15 +15 +Connector_Dsub +DSUB-15_Male_Horizontal_P2.77x2.84mm_EdgePinOffset9.90mm_Housed_MountingHolesOffset11.32mm +15-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.77x2.84mm, pin-PCB-offset 9.9mm, distance of mounting holes 33.3mm, distance of mounting holes to PCB edge 11.32mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +15-pin D-Sub connector horizontal angled 90deg THT male pitch 2.77x2.84mm pin-PCB-offset 9.9mm mounting-holes-distance 33.3mm mounting-hole-offset 33.3mm +0 +17 +16 +Connector_Dsub +DSUB-15_Male_Horizontal_P2.77x2.84mm_EdgePinOffset14.56mm_Housed_MountingHolesOffset8.20mm +15-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.77x2.84mm, pin-PCB-offset 14.56mm, distance of mounting holes 33.3mm, distance of mounting holes to PCB edge 8.2mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +15-pin D-Sub connector horizontal angled 90deg THT male pitch 2.77x2.84mm pin-PCB-offset 14.56mm mounting-holes-distance 33.3mm mounting-hole-offset 33.3mm +0 +17 +16 +Connector_Dsub +DSUB-15_Male_Horizontal_P2.77x2.84mm_EdgePinOffset14.56mm_Housed_MountingHolesOffset15.98mm +15-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.77x2.84mm, pin-PCB-offset 14.56mm, distance of mounting holes 33.3mm, distance of mounting holes to PCB edge 15.979999999999999mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +15-pin D-Sub connector horizontal angled 90deg THT male pitch 2.77x2.84mm pin-PCB-offset 14.56mm mounting-holes-distance 33.3mm mounting-hole-offset 33.3mm +0 +17 +16 +Connector_Dsub +DSUB-15_Male_Vertical_P2.77x2.84mm +15-pin D-Sub connector, straight/vertical, THT-mount, male, pitch 2.77x2.84mm, distance of mounting holes 33.3mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +15-pin D-Sub connector straight vertical THT male pitch 2.77x2.84mm mounting holes distance 33.3mm +0 +15 +15 +Connector_Dsub +DSUB-15_Male_Vertical_P2.77x2.84mm_MountingHoles +15-pin D-Sub connector, straight/vertical, THT-mount, male, pitch 2.77x2.84mm, distance of mounting holes 33.3mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +15-pin D-Sub connector straight vertical THT male pitch 2.77x2.84mm mounting holes distance 33.3mm +0 +17 +16 +Connector_Dsub +DSUB-25_Female_EdgeMount_P2.77mm +25-pin D-Sub connector, solder-cups edge-mounted, female, x-pin-pitch 2.77mm, distance of mounting holes 47.1mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +25-pin D-Sub connector edge mount solder cup female x-pin-pitch 2.77mm mounting holes distance 47.1mm +0 +25 +25 +Connector_Dsub +DSUB-25_Female_Horizontal_P2.77x2.54mm_EdgePinOffset9.40mm +25-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.77x2.54mm, pin-PCB-offset 9.4mm, see http://docs-europe.electrocomponents.com/webdocs/1585/0900766b81585df2.pdf +25-pin D-Sub connector horizontal angled 90deg THT female pitch 2.77x2.54mm pin-PCB-offset 9.4mm +0 +25 +25 +Connector_Dsub +DSUB-25_Female_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset7.48mm +25-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.77x2.84mm, pin-PCB-offset 4.9399999999999995mm, distance of mounting holes 47.1mm, distance of mounting holes to PCB edge 7.4799999999999995mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +25-pin D-Sub connector horizontal angled 90deg THT female pitch 2.77x2.84mm pin-PCB-offset 4.9399999999999995mm mounting-holes-distance 47.1mm mounting-hole-offset 47.1mm +0 +27 +26 +Connector_Dsub +DSUB-25_Female_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm +25-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.77x2.84mm, pin-PCB-offset 7.699999999999999mm, distance of mounting holes 47.1mm, distance of mounting holes to PCB edge 9.12mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +25-pin D-Sub connector horizontal angled 90deg THT female pitch 2.77x2.84mm pin-PCB-offset 7.699999999999999mm mounting-holes-distance 47.1mm mounting-hole-offset 47.1mm +0 +27 +26 +Connector_Dsub +DSUB-25_Female_Horizontal_P2.77x2.84mm_EdgePinOffset9.40mm +25-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.77x2.84mm, pin-PCB-offset 9.4mm, see http://docs-europe.electrocomponents.com/webdocs/1585/0900766b81585df2.pdf +25-pin D-Sub connector horizontal angled 90deg THT female pitch 2.77x2.84mm pin-PCB-offset 9.4mm +0 +25 +25 +Connector_Dsub +DSUB-25_Female_Horizontal_P2.77x2.84mm_EdgePinOffset9.90mm_Housed_MountingHolesOffset11.32mm +25-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.77x2.84mm, pin-PCB-offset 9.9mm, distance of mounting holes 47.1mm, distance of mounting holes to PCB edge 11.32mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +25-pin D-Sub connector horizontal angled 90deg THT female pitch 2.77x2.84mm pin-PCB-offset 9.9mm mounting-holes-distance 47.1mm mounting-hole-offset 47.1mm +0 +27 +26 +Connector_Dsub +DSUB-25_Female_Horizontal_P2.77x2.84mm_EdgePinOffset14.56mm_Housed_MountingHolesOffset8.20mm +25-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.77x2.84mm, pin-PCB-offset 14.56mm, distance of mounting holes 47.1mm, distance of mounting holes to PCB edge 8.2mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +25-pin D-Sub connector horizontal angled 90deg THT female pitch 2.77x2.84mm pin-PCB-offset 14.56mm mounting-holes-distance 47.1mm mounting-hole-offset 47.1mm +0 +27 +26 +Connector_Dsub +DSUB-25_Female_Horizontal_P2.77x2.84mm_EdgePinOffset14.56mm_Housed_MountingHolesOffset15.98mm +25-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.77x2.84mm, pin-PCB-offset 14.56mm, distance of mounting holes 47.1mm, distance of mounting holes to PCB edge 15.979999999999999mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +25-pin D-Sub connector horizontal angled 90deg THT female pitch 2.77x2.84mm pin-PCB-offset 14.56mm mounting-holes-distance 47.1mm mounting-hole-offset 47.1mm +0 +27 +26 +Connector_Dsub +DSUB-25_Female_Vertical_P2.77x2.84mm +25-pin D-Sub connector, straight/vertical, THT-mount, female, pitch 2.77x2.84mm, distance of mounting holes 47.1mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +25-pin D-Sub connector straight vertical THT female pitch 2.77x2.84mm mounting holes distance 47.1mm +0 +25 +25 +Connector_Dsub +DSUB-25_Female_Vertical_P2.77x2.84mm_MountingHoles +25-pin D-Sub connector, straight/vertical, THT-mount, female, pitch 2.77x2.84mm, distance of mounting holes 47.1mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +25-pin D-Sub connector straight vertical THT female pitch 2.77x2.84mm mounting holes distance 47.1mm +0 +27 +26 +Connector_Dsub +DSUB-25_Male_EdgeMount_P2.77mm +25-pin D-Sub connector, solder-cups edge-mounted, male, x-pin-pitch 2.77mm, distance of mounting holes 47.1mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +25-pin D-Sub connector edge mount solder cup male x-pin-pitch 2.77mm mounting holes distance 47.1mm +0 +25 +25 +Connector_Dsub +DSUB-25_Male_Horizontal_P2.77x2.54mm_EdgePinOffset9.40mm +25-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.77x2.54mm, pin-PCB-offset 9.4mm, see http://docs-europe.electrocomponents.com/webdocs/1585/0900766b81585df2.pdf +25-pin D-Sub connector horizontal angled 90deg THT male pitch 2.77x2.54mm pin-PCB-offset 9.4mm +0 +25 +25 +Connector_Dsub +DSUB-25_Male_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset7.48mm +25-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.77x2.84mm, pin-PCB-offset 4.9399999999999995mm, distance of mounting holes 47.1mm, distance of mounting holes to PCB edge 7.4799999999999995mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +25-pin D-Sub connector horizontal angled 90deg THT male pitch 2.77x2.84mm pin-PCB-offset 4.9399999999999995mm mounting-holes-distance 47.1mm mounting-hole-offset 47.1mm +0 +27 +26 +Connector_Dsub +DSUB-25_Male_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm +25-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.77x2.84mm, pin-PCB-offset 7.699999999999999mm, distance of mounting holes 47.1mm, distance of mounting holes to PCB edge 9.12mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +25-pin D-Sub connector horizontal angled 90deg THT male pitch 2.77x2.84mm pin-PCB-offset 7.699999999999999mm mounting-holes-distance 47.1mm mounting-hole-offset 47.1mm +0 +27 +26 +Connector_Dsub +DSUB-25_Male_Horizontal_P2.77x2.84mm_EdgePinOffset9.40mm +25-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.77x2.84mm, pin-PCB-offset 9.4mm, see http://docs-europe.electrocomponents.com/webdocs/1585/0900766b81585df2.pdf +25-pin D-Sub connector horizontal angled 90deg THT male pitch 2.77x2.84mm pin-PCB-offset 9.4mm +0 +25 +25 +Connector_Dsub +DSUB-25_Male_Horizontal_P2.77x2.84mm_EdgePinOffset9.90mm_Housed_MountingHolesOffset11.32mm +25-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.77x2.84mm, pin-PCB-offset 9.9mm, distance of mounting holes 47.1mm, distance of mounting holes to PCB edge 11.32mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +25-pin D-Sub connector horizontal angled 90deg THT male pitch 2.77x2.84mm pin-PCB-offset 9.9mm mounting-holes-distance 47.1mm mounting-hole-offset 47.1mm +0 +27 +26 +Connector_Dsub +DSUB-25_Male_Horizontal_P2.77x2.84mm_EdgePinOffset14.56mm_Housed_MountingHolesOffset8.20mm +25-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.77x2.84mm, pin-PCB-offset 14.56mm, distance of mounting holes 47.1mm, distance of mounting holes to PCB edge 8.2mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +25-pin D-Sub connector horizontal angled 90deg THT male pitch 2.77x2.84mm pin-PCB-offset 14.56mm mounting-holes-distance 47.1mm mounting-hole-offset 47.1mm +0 +27 +26 +Connector_Dsub +DSUB-25_Male_Horizontal_P2.77x2.84mm_EdgePinOffset14.56mm_Housed_MountingHolesOffset15.98mm +25-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.77x2.84mm, pin-PCB-offset 14.56mm, distance of mounting holes 47.1mm, distance of mounting holes to PCB edge 15.979999999999999mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +25-pin D-Sub connector horizontal angled 90deg THT male pitch 2.77x2.84mm pin-PCB-offset 14.56mm mounting-holes-distance 47.1mm mounting-hole-offset 47.1mm +0 +27 +26 +Connector_Dsub +DSUB-25_Male_Vertical_P2.77x2.84mm +25-pin D-Sub connector, straight/vertical, THT-mount, male, pitch 2.77x2.84mm, distance of mounting holes 47.1mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +25-pin D-Sub connector straight vertical THT male pitch 2.77x2.84mm mounting holes distance 47.1mm +0 +25 +25 +Connector_Dsub +DSUB-25_Male_Vertical_P2.77x2.84mm_MountingHoles +25-pin D-Sub connector, straight/vertical, THT-mount, male, pitch 2.77x2.84mm, distance of mounting holes 47.1mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +25-pin D-Sub connector straight vertical THT male pitch 2.77x2.84mm mounting holes distance 47.1mm +0 +27 +26 +Connector_Dsub +DSUB-26-HD_Female_Horizontal_P2.29x1.98mm_EdgePinOffset3.03mm_Housed_MountingHolesOffset4.94mm +26-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.29x1.98mm, pin-PCB-offset 3.0300000000000002mm, distance of mounting holes 33.3mm, distance of mounting holes to PCB edge 4.9399999999999995mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +26-pin D-Sub connector horizontal angled 90deg THT female pitch 2.29x1.98mm pin-PCB-offset 3.0300000000000002mm mounting-holes-distance 33.3mm mounting-hole-offset 33.3mm +0 +28 +27 +Connector_Dsub +DSUB-26-HD_Female_Horizontal_P2.29x1.98mm_EdgePinOffset8.35mm_Housed_MountingHolesOffset10.89mm +26-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.29x1.98mm, pin-PCB-offset 8.35mm, distance of mounting holes 33.3mm, distance of mounting holes to PCB edge 10.889999999999999mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +26-pin D-Sub connector horizontal angled 90deg THT female pitch 2.29x1.98mm pin-PCB-offset 8.35mm mounting-holes-distance 33.3mm mounting-hole-offset 33.3mm +0 +28 +27 +Connector_Dsub +DSUB-26-HD_Female_Horizontal_P2.29x1.98mm_EdgePinOffset9.40mm +26-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.29x1.98mm, pin-PCB-offset 9.4mm, see http://docs-europe.electrocomponents.com/webdocs/1585/0900766b81585df2.pdf +26-pin D-Sub connector horizontal angled 90deg THT female pitch 2.29x1.98mm pin-PCB-offset 9.4mm +0 +26 +26 +Connector_Dsub +DSUB-26-HD_Female_Horizontal_P2.29x2.54mm_EdgePinOffset9.40mm +26-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.29x2.54mm, pin-PCB-offset 9.4mm, see http://docs-europe.electrocomponents.com/webdocs/1585/0900766b81585df2.pdf +26-pin D-Sub connector horizontal angled 90deg THT female pitch 2.29x2.54mm pin-PCB-offset 9.4mm +0 +26 +26 +Connector_Dsub +DSUB-26-HD_Female_Vertical_P2.29x1.98mm_MountingHoles +26-pin D-Sub connector, straight/vertical, THT-mount, female, pitch 2.29x1.98mm, distance of mounting holes 33.3mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +26-pin D-Sub connector straight vertical THT female pitch 2.29x1.98mm mounting holes distance 33.3mm +0 +28 +27 +Connector_Dsub +DSUB-26-HD_Male_Horizontal_P2.29x1.98mm_EdgePinOffset3.03mm_Housed_MountingHolesOffset4.94mm +26-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.29x1.98mm, pin-PCB-offset 3.0300000000000002mm, distance of mounting holes 33.3mm, distance of mounting holes to PCB edge 4.9399999999999995mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +26-pin D-Sub connector horizontal angled 90deg THT male pitch 2.29x1.98mm pin-PCB-offset 3.0300000000000002mm mounting-holes-distance 33.3mm mounting-hole-offset 33.3mm +0 +28 +27 +Connector_Dsub +DSUB-26-HD_Male_Horizontal_P2.29x1.98mm_EdgePinOffset8.35mm_Housed_MountingHolesOffset10.89mm +26-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.29x1.98mm, pin-PCB-offset 8.35mm, distance of mounting holes 33.3mm, distance of mounting holes to PCB edge 10.889999999999999mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +26-pin D-Sub connector horizontal angled 90deg THT male pitch 2.29x1.98mm pin-PCB-offset 8.35mm mounting-holes-distance 33.3mm mounting-hole-offset 33.3mm +0 +28 +27 +Connector_Dsub +DSUB-26-HD_Male_Horizontal_P2.29x1.98mm_EdgePinOffset9.40mm +26-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.29x1.98mm, pin-PCB-offset 9.4mm, see http://docs-europe.electrocomponents.com/webdocs/1585/0900766b81585df2.pdf +26-pin D-Sub connector horizontal angled 90deg THT male pitch 2.29x1.98mm pin-PCB-offset 9.4mm +0 +26 +26 +Connector_Dsub +DSUB-26-HD_Male_Horizontal_P2.29x2.54mm_EdgePinOffset9.40mm +26-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.29x2.54mm, pin-PCB-offset 9.4mm, see http://docs-europe.electrocomponents.com/webdocs/1585/0900766b81585df2.pdf +26-pin D-Sub connector horizontal angled 90deg THT male pitch 2.29x2.54mm pin-PCB-offset 9.4mm +0 +26 +26 +Connector_Dsub +DSUB-26-HD_Male_Vertical_P2.29x1.98mm_MountingHoles +26-pin D-Sub connector, straight/vertical, THT-mount, male, pitch 2.29x1.98mm, distance of mounting holes 33.3mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +26-pin D-Sub connector straight vertical THT male pitch 2.29x1.98mm mounting holes distance 33.3mm +0 +28 +27 +Connector_Dsub +DSUB-37_Female_EdgeMount_P2.77mm +37-pin D-Sub connector, solder-cups edge-mounted, female, x-pin-pitch 2.77mm, distance of mounting holes 63.5mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +37-pin D-Sub connector edge mount solder cup female x-pin-pitch 2.77mm mounting holes distance 63.5mm +0 +37 +37 +Connector_Dsub +DSUB-37_Female_Horizontal_P2.77x2.54mm_EdgePinOffset9.40mm +37-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.77x2.54mm, pin-PCB-offset 9.4mm, see http://docs-europe.electrocomponents.com/webdocs/1585/0900766b81585df2.pdf +37-pin D-Sub connector horizontal angled 90deg THT female pitch 2.77x2.54mm pin-PCB-offset 9.4mm +0 +37 +37 +Connector_Dsub +DSUB-37_Female_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset7.48mm +37-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.77x2.84mm, pin-PCB-offset 4.9399999999999995mm, distance of mounting holes 63.5mm, distance of mounting holes to PCB edge 7.4799999999999995mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +37-pin D-Sub connector horizontal angled 90deg THT female pitch 2.77x2.84mm pin-PCB-offset 4.9399999999999995mm mounting-holes-distance 63.5mm mounting-hole-offset 63.5mm +0 +39 +38 +Connector_Dsub +DSUB-37_Female_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm +37-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.77x2.84mm, pin-PCB-offset 7.699999999999999mm, distance of mounting holes 63.5mm, distance of mounting holes to PCB edge 9.12mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +37-pin D-Sub connector horizontal angled 90deg THT female pitch 2.77x2.84mm pin-PCB-offset 7.699999999999999mm mounting-holes-distance 63.5mm mounting-hole-offset 63.5mm +0 +39 +38 +Connector_Dsub +DSUB-37_Female_Horizontal_P2.77x2.84mm_EdgePinOffset9.40mm +37-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.77x2.84mm, pin-PCB-offset 9.4mm, see http://docs-europe.electrocomponents.com/webdocs/1585/0900766b81585df2.pdf +37-pin D-Sub connector horizontal angled 90deg THT female pitch 2.77x2.84mm pin-PCB-offset 9.4mm +0 +37 +37 +Connector_Dsub +DSUB-37_Female_Horizontal_P2.77x2.84mm_EdgePinOffset9.90mm_Housed_MountingHolesOffset11.32mm +37-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.77x2.84mm, pin-PCB-offset 9.9mm, distance of mounting holes 63.5mm, distance of mounting holes to PCB edge 11.32mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +37-pin D-Sub connector horizontal angled 90deg THT female pitch 2.77x2.84mm pin-PCB-offset 9.9mm mounting-holes-distance 63.5mm mounting-hole-offset 63.5mm +0 +39 +38 +Connector_Dsub +DSUB-37_Female_Horizontal_P2.77x2.84mm_EdgePinOffset14.56mm_Housed_MountingHolesOffset8.20mm +37-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.77x2.84mm, pin-PCB-offset 14.56mm, distance of mounting holes 63.5mm, distance of mounting holes to PCB edge 8.2mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +37-pin D-Sub connector horizontal angled 90deg THT female pitch 2.77x2.84mm pin-PCB-offset 14.56mm mounting-holes-distance 63.5mm mounting-hole-offset 63.5mm +0 +39 +38 +Connector_Dsub +DSUB-37_Female_Horizontal_P2.77x2.84mm_EdgePinOffset14.56mm_Housed_MountingHolesOffset15.98mm +37-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.77x2.84mm, pin-PCB-offset 14.56mm, distance of mounting holes 63.5mm, distance of mounting holes to PCB edge 15.979999999999999mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +37-pin D-Sub connector horizontal angled 90deg THT female pitch 2.77x2.84mm pin-PCB-offset 14.56mm mounting-holes-distance 63.5mm mounting-hole-offset 63.5mm +0 +39 +38 +Connector_Dsub +DSUB-37_Female_Vertical_P2.77x2.84mm +37-pin D-Sub connector, straight/vertical, THT-mount, female, pitch 2.77x2.84mm, distance of mounting holes 63.5mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +37-pin D-Sub connector straight vertical THT female pitch 2.77x2.84mm mounting holes distance 63.5mm +0 +37 +37 +Connector_Dsub +DSUB-37_Female_Vertical_P2.77x2.84mm_MountingHoles +37-pin D-Sub connector, straight/vertical, THT-mount, female, pitch 2.77x2.84mm, distance of mounting holes 63.5mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +37-pin D-Sub connector straight vertical THT female pitch 2.77x2.84mm mounting holes distance 63.5mm +0 +39 +38 +Connector_Dsub +DSUB-37_Male_EdgeMount_P2.77mm +37-pin D-Sub connector, solder-cups edge-mounted, male, x-pin-pitch 2.77mm, distance of mounting holes 63.5mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +37-pin D-Sub connector edge mount solder cup male x-pin-pitch 2.77mm mounting holes distance 63.5mm +0 +37 +37 +Connector_Dsub +DSUB-37_Male_Horizontal_P2.77x2.54mm_EdgePinOffset9.40mm +37-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.77x2.54mm, pin-PCB-offset 9.4mm, see http://docs-europe.electrocomponents.com/webdocs/1585/0900766b81585df2.pdf +37-pin D-Sub connector horizontal angled 90deg THT male pitch 2.77x2.54mm pin-PCB-offset 9.4mm +0 +37 +37 +Connector_Dsub +DSUB-37_Male_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset7.48mm +37-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.77x2.84mm, pin-PCB-offset 4.9399999999999995mm, distance of mounting holes 63.5mm, distance of mounting holes to PCB edge 7.4799999999999995mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +37-pin D-Sub connector horizontal angled 90deg THT male pitch 2.77x2.84mm pin-PCB-offset 4.9399999999999995mm mounting-holes-distance 63.5mm mounting-hole-offset 63.5mm +0 +39 +38 +Connector_Dsub +DSUB-37_Male_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm +37-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.77x2.84mm, pin-PCB-offset 7.699999999999999mm, distance of mounting holes 63.5mm, distance of mounting holes to PCB edge 9.12mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +37-pin D-Sub connector horizontal angled 90deg THT male pitch 2.77x2.84mm pin-PCB-offset 7.699999999999999mm mounting-holes-distance 63.5mm mounting-hole-offset 63.5mm +0 +39 +38 +Connector_Dsub +DSUB-37_Male_Horizontal_P2.77x2.84mm_EdgePinOffset9.40mm +37-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.77x2.84mm, pin-PCB-offset 9.4mm, see http://docs-europe.electrocomponents.com/webdocs/1585/0900766b81585df2.pdf +37-pin D-Sub connector horizontal angled 90deg THT male pitch 2.77x2.84mm pin-PCB-offset 9.4mm +0 +37 +37 +Connector_Dsub +DSUB-37_Male_Horizontal_P2.77x2.84mm_EdgePinOffset9.90mm_Housed_MountingHolesOffset11.32mm +37-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.77x2.84mm, pin-PCB-offset 9.9mm, distance of mounting holes 63.5mm, distance of mounting holes to PCB edge 11.32mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +37-pin D-Sub connector horizontal angled 90deg THT male pitch 2.77x2.84mm pin-PCB-offset 9.9mm mounting-holes-distance 63.5mm mounting-hole-offset 63.5mm +0 +39 +38 +Connector_Dsub +DSUB-37_Male_Horizontal_P2.77x2.84mm_EdgePinOffset14.56mm_Housed_MountingHolesOffset8.20mm +37-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.77x2.84mm, pin-PCB-offset 14.56mm, distance of mounting holes 63.5mm, distance of mounting holes to PCB edge 8.2mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +37-pin D-Sub connector horizontal angled 90deg THT male pitch 2.77x2.84mm pin-PCB-offset 14.56mm mounting-holes-distance 63.5mm mounting-hole-offset 63.5mm +0 +39 +38 +Connector_Dsub +DSUB-37_Male_Horizontal_P2.77x2.84mm_EdgePinOffset14.56mm_Housed_MountingHolesOffset15.98mm +37-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.77x2.84mm, pin-PCB-offset 14.56mm, distance of mounting holes 63.5mm, distance of mounting holes to PCB edge 15.979999999999999mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +37-pin D-Sub connector horizontal angled 90deg THT male pitch 2.77x2.84mm pin-PCB-offset 14.56mm mounting-holes-distance 63.5mm mounting-hole-offset 63.5mm +0 +39 +38 +Connector_Dsub +DSUB-37_Male_Vertical_P2.77x2.84mm +37-pin D-Sub connector, straight/vertical, THT-mount, male, pitch 2.77x2.84mm, distance of mounting holes 63.5mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +37-pin D-Sub connector straight vertical THT male pitch 2.77x2.84mm mounting holes distance 63.5mm +0 +37 +37 +Connector_Dsub +DSUB-37_Male_Vertical_P2.77x2.84mm_MountingHoles +37-pin D-Sub connector, straight/vertical, THT-mount, male, pitch 2.77x2.84mm, distance of mounting holes 63.5mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +37-pin D-Sub connector straight vertical THT male pitch 2.77x2.84mm mounting holes distance 63.5mm +0 +39 +38 +Connector_Dsub +DSUB-44-HD_Female_Horizontal_P2.29x1.98mm_EdgePinOffset3.03mm_Housed_MountingHolesOffset4.94mm +44-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.29x1.98mm, pin-PCB-offset 3.0300000000000002mm, distance of mounting holes 47.1mm, distance of mounting holes to PCB edge 4.9399999999999995mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +44-pin D-Sub connector horizontal angled 90deg THT female pitch 2.29x1.98mm pin-PCB-offset 3.0300000000000002mm mounting-holes-distance 47.1mm mounting-hole-offset 47.1mm +0 +46 +45 +Connector_Dsub +DSUB-44-HD_Female_Horizontal_P2.29x1.98mm_EdgePinOffset8.35mm_Housed_MountingHolesOffset10.89mm +44-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.29x1.98mm, pin-PCB-offset 8.35mm, distance of mounting holes 47.1mm, distance of mounting holes to PCB edge 10.889999999999999mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +44-pin D-Sub connector horizontal angled 90deg THT female pitch 2.29x1.98mm pin-PCB-offset 8.35mm mounting-holes-distance 47.1mm mounting-hole-offset 47.1mm +0 +46 +45 +Connector_Dsub +DSUB-44-HD_Female_Horizontal_P2.29x1.98mm_EdgePinOffset9.40mm +44-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.29x1.98mm, pin-PCB-offset 9.4mm, see http://docs-europe.electrocomponents.com/webdocs/1585/0900766b81585df2.pdf +44-pin D-Sub connector horizontal angled 90deg THT female pitch 2.29x1.98mm pin-PCB-offset 9.4mm +0 +44 +44 +Connector_Dsub +DSUB-44-HD_Female_Horizontal_P2.29x2.54mm_EdgePinOffset9.40mm +44-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.29x2.54mm, pin-PCB-offset 9.4mm, see http://docs-europe.electrocomponents.com/webdocs/1585/0900766b81585df2.pdf +44-pin D-Sub connector horizontal angled 90deg THT female pitch 2.29x2.54mm pin-PCB-offset 9.4mm +0 +44 +44 +Connector_Dsub +DSUB-44-HD_Female_Vertical_P2.29x1.98mm_MountingHoles +44-pin D-Sub connector, straight/vertical, THT-mount, female, pitch 2.29x1.98mm, distance of mounting holes 47.1mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +44-pin D-Sub connector straight vertical THT female pitch 2.29x1.98mm mounting holes distance 47.1mm +0 +46 +45 +Connector_Dsub +DSUB-44-HD_Male_Horizontal_P2.29x1.98mm_EdgePinOffset3.03mm_Housed_MountingHolesOffset4.94mm +44-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.29x1.98mm, pin-PCB-offset 3.0300000000000002mm, distance of mounting holes 47.1mm, distance of mounting holes to PCB edge 4.9399999999999995mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +44-pin D-Sub connector horizontal angled 90deg THT male pitch 2.29x1.98mm pin-PCB-offset 3.0300000000000002mm mounting-holes-distance 47.1mm mounting-hole-offset 47.1mm +0 +46 +45 +Connector_Dsub +DSUB-44-HD_Male_Horizontal_P2.29x1.98mm_EdgePinOffset8.35mm_Housed_MountingHolesOffset10.89mm +44-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.29x1.98mm, pin-PCB-offset 8.35mm, distance of mounting holes 47.1mm, distance of mounting holes to PCB edge 10.889999999999999mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +44-pin D-Sub connector horizontal angled 90deg THT male pitch 2.29x1.98mm pin-PCB-offset 8.35mm mounting-holes-distance 47.1mm mounting-hole-offset 47.1mm +0 +46 +45 +Connector_Dsub +DSUB-44-HD_Male_Horizontal_P2.29x1.98mm_EdgePinOffset9.40mm +44-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.29x1.98mm, pin-PCB-offset 9.4mm, see http://docs-europe.electrocomponents.com/webdocs/1585/0900766b81585df2.pdf +44-pin D-Sub connector horizontal angled 90deg THT male pitch 2.29x1.98mm pin-PCB-offset 9.4mm +0 +44 +44 +Connector_Dsub +DSUB-44-HD_Male_Horizontal_P2.29x2.54mm_EdgePinOffset9.40mm +44-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.29x2.54mm, pin-PCB-offset 9.4mm, see http://docs-europe.electrocomponents.com/webdocs/1585/0900766b81585df2.pdf +44-pin D-Sub connector horizontal angled 90deg THT male pitch 2.29x2.54mm pin-PCB-offset 9.4mm +0 +44 +44 +Connector_Dsub +DSUB-44-HD_Male_Vertical_P2.29x1.98mm_MountingHoles +44-pin D-Sub connector, straight/vertical, THT-mount, male, pitch 2.29x1.98mm, distance of mounting holes 47.1mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +44-pin D-Sub connector straight vertical THT male pitch 2.29x1.98mm mounting holes distance 47.1mm +0 +46 +45 +Connector_Dsub +DSUB-62-HD_Female_Horizontal_P2.41x1.98mm_EdgePinOffset3.03mm_Housed_MountingHolesOffset4.94mm +62-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.41x1.98mm, pin-PCB-offset 3.0300000000000002mm, distance of mounting holes 63.5mm, distance of mounting holes to PCB edge 4.9399999999999995mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +62-pin D-Sub connector horizontal angled 90deg THT female pitch 2.41x1.98mm pin-PCB-offset 3.0300000000000002mm mounting-holes-distance 63.5mm mounting-hole-offset 63.5mm +0 +64 +63 +Connector_Dsub +DSUB-62-HD_Female_Horizontal_P2.41x1.98mm_EdgePinOffset8.35mm_Housed_MountingHolesOffset10.89mm +62-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.41x1.98mm, pin-PCB-offset 8.35mm, distance of mounting holes 63.5mm, distance of mounting holes to PCB edge 10.889999999999999mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +62-pin D-Sub connector horizontal angled 90deg THT female pitch 2.41x1.98mm pin-PCB-offset 8.35mm mounting-holes-distance 63.5mm mounting-hole-offset 63.5mm +0 +64 +63 +Connector_Dsub +DSUB-62-HD_Female_Horizontal_P2.41x1.98mm_EdgePinOffset9.40mm +62-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.41x1.98mm, pin-PCB-offset 9.4mm, see http://docs-europe.electrocomponents.com/webdocs/1585/0900766b81585df2.pdf +62-pin D-Sub connector horizontal angled 90deg THT female pitch 2.41x1.98mm pin-PCB-offset 9.4mm +0 +62 +62 +Connector_Dsub +DSUB-62-HD_Female_Horizontal_P2.41x2.54mm_EdgePinOffset9.40mm +62-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, female, pitch 2.41x2.54mm, pin-PCB-offset 9.4mm, see http://docs-europe.electrocomponents.com/webdocs/1585/0900766b81585df2.pdf +62-pin D-Sub connector horizontal angled 90deg THT female pitch 2.41x2.54mm pin-PCB-offset 9.4mm +0 +62 +62 +Connector_Dsub +DSUB-62-HD_Female_Vertical_P2.41x1.98mm_MountingHoles +62-pin D-Sub connector, straight/vertical, THT-mount, female, pitch 2.41x1.98mm, distance of mounting holes 63.5mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +62-pin D-Sub connector straight vertical THT female pitch 2.41x1.98mm mounting holes distance 63.5mm +0 +64 +63 +Connector_Dsub +DSUB-62-HD_Male_Horizontal_P2.41x1.98mm_EdgePinOffset3.03mm_Housed_MountingHolesOffset4.94mm +62-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.41x1.98mm, pin-PCB-offset 3.0300000000000002mm, distance of mounting holes 63.5mm, distance of mounting holes to PCB edge 4.9399999999999995mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +62-pin D-Sub connector horizontal angled 90deg THT male pitch 2.41x1.98mm pin-PCB-offset 3.0300000000000002mm mounting-holes-distance 63.5mm mounting-hole-offset 63.5mm +0 +64 +63 +Connector_Dsub +DSUB-62-HD_Male_Horizontal_P2.41x1.98mm_EdgePinOffset8.35mm_Housed_MountingHolesOffset10.89mm +62-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.41x1.98mm, pin-PCB-offset 8.35mm, distance of mounting holes 63.5mm, distance of mounting holes to PCB edge 10.889999999999999mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +62-pin D-Sub connector horizontal angled 90deg THT male pitch 2.41x1.98mm pin-PCB-offset 8.35mm mounting-holes-distance 63.5mm mounting-hole-offset 63.5mm +0 +64 +63 +Connector_Dsub +DSUB-62-HD_Male_Horizontal_P2.41x1.98mm_EdgePinOffset9.40mm +62-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.41x1.98mm, pin-PCB-offset 9.4mm, see http://docs-europe.electrocomponents.com/webdocs/1585/0900766b81585df2.pdf +62-pin D-Sub connector horizontal angled 90deg THT male pitch 2.41x1.98mm pin-PCB-offset 9.4mm +0 +62 +62 +Connector_Dsub +DSUB-62-HD_Male_Horizontal_P2.41x2.54mm_EdgePinOffset9.40mm +62-pin D-Sub connector, horizontal/angled (90 deg), THT-mount, male, pitch 2.41x2.54mm, pin-PCB-offset 9.4mm, see http://docs-europe.electrocomponents.com/webdocs/1585/0900766b81585df2.pdf +62-pin D-Sub connector horizontal angled 90deg THT male pitch 2.41x2.54mm pin-PCB-offset 9.4mm +0 +62 +62 +Connector_Dsub +DSUB-62-HD_Male_Vertical_P2.41x1.98mm_MountingHoles +62-pin D-Sub connector, straight/vertical, THT-mount, male, pitch 2.41x1.98mm, distance of mounting holes 63.5mm, see https://disti-assets.s3.amazonaws.com/tonar/files/datasheets/16730.pdf +62-pin D-Sub connector straight vertical THT male pitch 2.41x1.98mm mounting holes distance 63.5mm +0 +64 +63 +Connector_FFC-FPC +Hirose_FH12-6S-0.5SH_1x06-1MP_P0.50mm_Horizontal +Hirose FH12, FFC/FPC connector, FH12-6S-0.5SH, 6 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator +connector Hirose FH12 horizontal +0 +8 +7 +Connector_FFC-FPC +Hirose_FH12-8S-0.5SH_1x08-1MP_P0.50mm_Horizontal +Hirose FH12, FFC/FPC connector, FH12-8S-0.5SH, 8 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator +connector Hirose FH12 horizontal +0 +10 +9 +Connector_FFC-FPC +Hirose_FH12-10S-0.5SH_1x10-1MP_P0.50mm_Horizontal +Hirose FH12, FFC/FPC connector, FH12-10S-0.5SH, 10 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator +connector Hirose FH12 horizontal +0 +12 +11 +Connector_FFC-FPC +Hirose_FH12-11S-0.5SH_1x11-1MP_P0.50mm_Horizontal +Hirose FH12, FFC/FPC connector, FH12-11S-0.5SH, 11 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator +connector Hirose FH12 horizontal +0 +13 +12 +Connector_FFC-FPC +Hirose_FH12-12S-0.5SH_1x12-1MP_P0.50mm_Horizontal +Hirose FH12, FFC/FPC connector, FH12-12S-0.5SH, 12 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator +connector Hirose FH12 horizontal +0 +14 +13 +Connector_FFC-FPC +Hirose_FH12-13S-0.5SH_1x13-1MP_P0.50mm_Horizontal +Hirose FH12, FFC/FPC connector, FH12-13S-0.5SH, 13 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator +connector Hirose FH12 horizontal +0 +15 +14 +Connector_FFC-FPC +Hirose_FH12-14S-0.5SH_1x14-1MP_P0.50mm_Horizontal +Hirose FH12, FFC/FPC connector, FH12-14S-0.5SH, 14 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator +connector Hirose FH12 horizontal +0 +16 +15 +Connector_FFC-FPC +Hirose_FH12-15S-0.5SH_1x15-1MP_P0.50mm_Horizontal +Hirose FH12, FFC/FPC connector, FH12-15S-0.5SH, 15 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator +connector Hirose FH12 horizontal +0 +17 +16 +Connector_FFC-FPC +Hirose_FH12-16S-0.5SH_1x16-1MP_P0.50mm_Horizontal +Hirose FH12, FFC/FPC connector, FH12-16S-0.5SH, 16 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator +connector Hirose FH12 horizontal +0 +18 +17 +Connector_FFC-FPC +Hirose_FH12-17S-0.5SH_1x17-1MP_P0.50mm_Horizontal +Hirose FH12, FFC/FPC connector, FH12-17S-0.5SH, 17 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator +connector Hirose FH12 horizontal +0 +19 +18 +Connector_FFC-FPC +Hirose_FH12-18S-0.5SH_1x18-1MP_P0.50mm_Horizontal +Hirose FH12, FFC/FPC connector, FH12-18S-0.5SH, 18 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator +connector Hirose FH12 horizontal +0 +20 +19 +Connector_FFC-FPC +Hirose_FH12-19S-0.5SH_1x19-1MP_P0.50mm_Horizontal +Hirose FH12, FFC/FPC connector, FH12-19S-0.5SH, 19 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator +connector Hirose FH12 horizontal +0 +21 +20 +Connector_FFC-FPC +Hirose_FH12-20S-0.5SH_1x20-1MP_P0.50mm_Horizontal +Hirose FH12, FFC/FPC connector, FH12-20S-0.5SH, 20 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator +connector Hirose FH12 horizontal +0 +22 +21 +Connector_FFC-FPC +Hirose_FH12-22S-0.5SH_1x22-1MP_P0.50mm_Horizontal +Hirose FH12, FFC/FPC connector, FH12-22S-0.5SH, 22 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator +connector Hirose FH12 horizontal +0 +24 +23 +Connector_FFC-FPC +Hirose_FH12-24S-0.5SH_1x24-1MP_P0.50mm_Horizontal +Hirose FH12, FFC/FPC connector, FH12-24S-0.5SH, 24 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator +connector Hirose FH12 horizontal +0 +26 +25 +Connector_FFC-FPC +Hirose_FH12-25S-0.5SH_1x25-1MP_P0.50mm_Horizontal +Hirose FH12, FFC/FPC connector, FH12-25S-0.5SH, 25 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator +connector Hirose FH12 horizontal +0 +27 +26 +Connector_FFC-FPC +Hirose_FH12-26S-0.5SH_1x26-1MP_P0.50mm_Horizontal +Hirose FH12, FFC/FPC connector, FH12-26S-0.5SH, 26 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator +connector Hirose FH12 horizontal +0 +28 +27 +Connector_FFC-FPC +Hirose_FH12-28S-0.5SH_1x28-1MP_P0.50mm_Horizontal +Hirose FH12, FFC/FPC connector, FH12-28S-0.5SH, 28 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator +connector Hirose FH12 horizontal +0 +30 +29 +Connector_FFC-FPC +Hirose_FH12-30S-0.5SH_1x30-1MP_P0.50mm_Horizontal +Hirose FH12, FFC/FPC connector, FH12-30S-0.5SH, 30 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator +connector Hirose FH12 horizontal +0 +32 +31 +Connector_FFC-FPC +Hirose_FH12-32S-0.5SH_1x32-1MP_P0.50mm_Horizontal +Hirose FH12, FFC/FPC connector, FH12-32S-0.5SH, 32 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator +connector Hirose FH12 horizontal +0 +34 +33 +Connector_FFC-FPC +Hirose_FH12-33S-0.5SH_1x33-1MP_P0.50mm_Horizontal +Hirose FH12, FFC/FPC connector, FH12-33S-0.5SH, 33 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator +connector Hirose FH12 horizontal +0 +35 +34 +Connector_FFC-FPC +Hirose_FH12-34S-0.5SH_1x34-1MP_P0.50mm_Horizontal +Hirose FH12, FFC/FPC connector, FH12-34S-0.5SH, 34 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator +connector Hirose FH12 horizontal +0 +36 +35 +Connector_FFC-FPC +Hirose_FH12-35S-0.5SH_1x35-1MP_P0.50mm_Horizontal +Hirose FH12, FFC/FPC connector, FH12-35S-0.5SH, 35 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator +connector Hirose FH12 horizontal +0 +37 +36 +Connector_FFC-FPC +Hirose_FH12-36S-0.5SH_1x36-1MP_P0.50mm_Horizontal +Hirose FH12, FFC/FPC connector, FH12-36S-0.5SH, 36 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator +connector Hirose FH12 horizontal +0 +38 +37 +Connector_FFC-FPC +Hirose_FH12-40S-0.5SH_1x40-1MP_P0.50mm_Horizontal +Hirose FH12, FFC/FPC connector, FH12-40S-0.5SH, 40 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator +connector Hirose FH12 horizontal +0 +42 +41 +Connector_FFC-FPC +Hirose_FH12-45S-0.5SH_1x45-1MP_P0.50mm_Horizontal +Hirose FH12, FFC/FPC connector, FH12-45S-0.5SH, 45 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator +connector Hirose FH12 horizontal +0 +47 +46 +Connector_FFC-FPC +Hirose_FH12-50S-0.5SH_1x50-1MP_P0.50mm_Horizontal +Hirose FH12, FFC/FPC connector, FH12-50S-0.5SH, 50 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator +connector Hirose FH12 horizontal +0 +52 +51 +Connector_FFC-FPC +Hirose_FH12-53S-0.5SH_1x53-1MP_P0.50mm_Horizontal +Hirose FH12, FFC/FPC connector, FH12-53S-0.5SH, 53 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator +connector Hirose FH12 horizontal +0 +55 +54 +Connector_FFC-FPC +Hirose_FH41-30S-0.5SH_1x30_1MP_1SH_P0.5mm_Horizontal +Hirose FH41, FFC/FPC connector, FH41-30S-0.5SH, 30 Pins per row (https://www.hirose.com/fr/product/document?clcode=CL0580-2218-5-05&productname=FH41-30S-0.5SH(05)&series=FH41&documenttype=2DDrawing&lang=fr&documentid=0001001704) +connector Hirose FH41 horizontal +0 +38 +32 +Connector_FFC-FPC +JAE_FF0825SA1_2Rows-25Pins_P0.40mm_Horizontal +Molex JAE 0.2mm pitch, 1mm overall height FFC/FPC connector, FF0825SA1, 25 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ108178.pdf), generated with kicad-footprint-generator +connector JAE top entry +0 +25 +25 +Connector_FFC-FPC +JAE_FF0829SA1_2Rows-29Pins_P0.40mm_Horizontal +Molex JAE 0.2mm pitch, 1mm overall height FFC/FPC connector, FF0829SA1, 29 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ108178.pdf), generated with kicad-footprint-generator +connector JAE top entry +0 +29 +29 +Connector_FFC-FPC +JAE_FF0841SA1_2Rows-41Pins_P0.40mm_Horizontal +Molex JAE 0.2mm pitch, 1mm overall height FFC/FPC connector, FF0841SA1, 41 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ108178.pdf), generated with kicad-footprint-generator +connector JAE top entry +0 +41 +41 +Connector_FFC-FPC +JAE_FF0851SA1_2Rows-51Pins_P0.40mm_Horizontal +Molex JAE 0.2mm pitch, 1mm overall height FFC/FPC connector, FF0851SA1, 51 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ108178.pdf), generated with kicad-footprint-generator +connector JAE top entry +0 +51 +51 +Connector_FFC-FPC +JAE_FF0871SA1_2Rows-71Pins_P0.40mm_Horizontal +Molex JAE 0.2mm pitch, 1mm overall height FFC/FPC connector, FF0871SA1, 71 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ108178.pdf), generated with kicad-footprint-generator +connector JAE top entry +0 +71 +71 +Connector_FFC-FPC +JAE_FF0881SA1_2Rows-81Pins_P0.40mm_Horizontal +Molex JAE 0.2mm pitch, 1mm overall height FFC/FPC connector, FF0881SA1, 81 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ108178.pdf), generated with kicad-footprint-generator +connector JAE top entry +0 +81 +81 +Connector_FFC-FPC +Jushuo_AFC07-S06FCA-00_1x6-1MP_P0.50_Horizontal +Jushuo AFC07, FFC/FPC connector, AFC07-S06FCA-00, 6 Pins per row (https://datasheet.lcsc.com/lcsc/1811040204_JUSHUO-AFC07-S32FCC-00_C11061.pdf) +connector jushuo horizontal +0 +8 +7 +Connector_FFC-FPC +Jushuo_AFC07-S24FCA-00_1x24-1MP_P0.50_Horizontal +Jushuo AFC07, FFC/FPC connector, AFC07-S24FCA-00, 24 Pins per row (https://datasheet.lcsc.com/lcsc/1811040204_JUSHUO-AFC07-S32FCC-00_C11061.pdf) +connector jushuo horizontal +0 +26 +25 +Connector_FFC-FPC +Molex_52559-3652_2x18-1MP_P0.5mm_Vertical +Molex 0.50mm Pitch Easy-On Type FFC/FPC, 52559-3652, 36 Circuits (https://www.molex.com/pdm_docs/sd/525593652_sd.pdf) +connector Molex top entry +0 +40 +37 +Connector_FFC-FPC +Molex_54132-5033_1x50-1MP_P0.5mm_Horizontal +Molex FFC/FPC connector, 50 bottom-side contacts, 0.5mm pitch, 2.0mm height, https://www.molex.com/pdm_docs/sd/541325033_sd.pdf +FFC FPC +0 +54 +51 +Connector_FFC-FPC +Molex_54548-1071_1x10-1MP_P0.5mm_Horizontal +Molex FFC/FPC connector, 10 bottom-side contacts, 0.5mm pitch, 1.2mm height, https://www.molex.com/pdm_docs/sd/545481071_sd.pdf +FFC FPC connector +0 +12 +11 +Connector_FFC-FPC +Molex_200528-0040_1x04-1MP_P1.00mm_Horizontal +Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0040, 4 Circuits (https://www.molex.com/pdm_docs/sd/2005280040_sd.pdf), generated with kicad-footprint-generator +connector Molex top entry +0 +6 +5 +Connector_FFC-FPC +Molex_200528-0050_1x05-1MP_P1.00mm_Horizontal +Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0050, 5 Circuits (https://www.molex.com/pdm_docs/sd/2005280050_sd.pdf), generated with kicad-footprint-generator +connector Molex top entry +0 +7 +6 +Connector_FFC-FPC +Molex_200528-0060_1x06-1MP_P1.00mm_Horizontal +Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0060, 6 Circuits (https://www.molex.com/pdm_docs/sd/2005280060_sd.pdf), generated with kicad-footprint-generator +connector Molex top entry +0 +8 +7 +Connector_FFC-FPC +Molex_200528-0070_1x07-1MP_P1.00mm_Horizontal +Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0070, 7 Circuits (https://www.molex.com/pdm_docs/sd/2005280070_sd.pdf), generated with kicad-footprint-generator +connector Molex top entry +0 +9 +8 +Connector_FFC-FPC +Molex_200528-0080_1x08-1MP_P1.00mm_Horizontal +Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0080, 8 Circuits (https://www.molex.com/pdm_docs/sd/2005280080_sd.pdf), generated with kicad-footprint-generator +connector Molex top entry +0 +10 +9 +Connector_FFC-FPC +Molex_200528-0090_1x09-1MP_P1.00mm_Horizontal +Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0090, 9 Circuits (https://www.molex.com/pdm_docs/sd/2005280090_sd.pdf), generated with kicad-footprint-generator +connector Molex top entry +0 +11 +10 +Connector_FFC-FPC +Molex_200528-0100_1x10-1MP_P1.00mm_Horizontal +Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0100, 10 Circuits (https://www.molex.com/pdm_docs/sd/2005280100_sd.pdf), generated with kicad-footprint-generator +connector Molex top entry +0 +12 +11 +Connector_FFC-FPC +Molex_200528-0110_1x11-1MP_P1.00mm_Horizontal +Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0110, 11 Circuits (https://www.molex.com/pdm_docs/sd/2005280110_sd.pdf), generated with kicad-footprint-generator +connector Molex top entry +0 +13 +12 +Connector_FFC-FPC +Molex_200528-0120_1x12-1MP_P1.00mm_Horizontal +Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0120, 12 Circuits (https://www.molex.com/pdm_docs/sd/2005280120_sd.pdf), generated with kicad-footprint-generator +connector Molex top entry +0 +14 +13 +Connector_FFC-FPC +Molex_200528-0130_1x13-1MP_P1.00mm_Horizontal +Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0130, 13 Circuits (https://www.molex.com/pdm_docs/sd/2005280130_sd.pdf), generated with kicad-footprint-generator +connector Molex top entry +0 +15 +14 +Connector_FFC-FPC +Molex_200528-0140_1x14-1MP_P1.00mm_Horizontal +Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0140, 14 Circuits (https://www.molex.com/pdm_docs/sd/2005280140_sd.pdf), generated with kicad-footprint-generator +connector Molex top entry +0 +16 +15 +Connector_FFC-FPC +Molex_200528-0150_1x15-1MP_P1.00mm_Horizontal +Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0150, 15 Circuits (https://www.molex.com/pdm_docs/sd/2005280150_sd.pdf), generated with kicad-footprint-generator +connector Molex top entry +0 +17 +16 +Connector_FFC-FPC +Molex_200528-0160_1x16-1MP_P1.00mm_Horizontal +Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0160, 16 Circuits (https://www.molex.com/pdm_docs/sd/2005280160_sd.pdf), generated with kicad-footprint-generator +connector Molex top entry +0 +18 +17 +Connector_FFC-FPC +Molex_200528-0170_1x17-1MP_P1.00mm_Horizontal +Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0170, 17 Circuits (https://www.molex.com/pdm_docs/sd/2005280170_sd.pdf), generated with kicad-footprint-generator +connector Molex top entry +0 +19 +18 +Connector_FFC-FPC +Molex_200528-0180_1x18-1MP_P1.00mm_Horizontal +Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0180, 18 Circuits (https://www.molex.com/pdm_docs/sd/2005280180_sd.pdf), generated with kicad-footprint-generator +connector Molex top entry +0 +20 +19 +Connector_FFC-FPC +Molex_200528-0190_1x19-1MP_P1.00mm_Horizontal +Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0190, 19 Circuits (https://www.molex.com/pdm_docs/sd/2005280190_sd.pdf), generated with kicad-footprint-generator +connector Molex top entry +0 +21 +20 +Connector_FFC-FPC +Molex_200528-0200_1x20-1MP_P1.00mm_Horizontal +Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0200, 20 Circuits (https://www.molex.com/pdm_docs/sd/2005280200_sd.pdf), generated with kicad-footprint-generator +connector Molex top entry +0 +22 +21 +Connector_FFC-FPC +Molex_200528-0210_1x21-1MP_P1.00mm_Horizontal +Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0210, 21 Circuits (https://www.molex.com/pdm_docs/sd/2005280210_sd.pdf), generated with kicad-footprint-generator +connector Molex top entry +0 +23 +22 +Connector_FFC-FPC +Molex_200528-0220_1x22-1MP_P1.00mm_Horizontal +Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0220, 22 Circuits (https://www.molex.com/pdm_docs/sd/2005280220_sd.pdf), generated with kicad-footprint-generator +connector Molex top entry +0 +24 +23 +Connector_FFC-FPC +Molex_200528-0230_1x23-1MP_P1.00mm_Horizontal +Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0230, 23 Circuits (https://www.molex.com/pdm_docs/sd/2005280230_sd.pdf), generated with kicad-footprint-generator +connector Molex top entry +0 +25 +24 +Connector_FFC-FPC +Molex_200528-0240_1x24-1MP_P1.00mm_Horizontal +Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0240, 24 Circuits (https://www.molex.com/pdm_docs/sd/2005280240_sd.pdf), generated with kicad-footprint-generator +connector Molex top entry +0 +26 +25 +Connector_FFC-FPC +Molex_200528-0250_1x25-1MP_P1.00mm_Horizontal +Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0250, 25 Circuits (https://www.molex.com/pdm_docs/sd/2005280250_sd.pdf), generated with kicad-footprint-generator +connector Molex top entry +0 +27 +26 +Connector_FFC-FPC +Molex_200528-0260_1x26-1MP_P1.00mm_Horizontal +Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0260, 26 Circuits (https://www.molex.com/pdm_docs/sd/2005280260_sd.pdf), generated with kicad-footprint-generator +connector Molex top entry +0 +28 +27 +Connector_FFC-FPC +Molex_200528-0270_1x27-1MP_P1.00mm_Horizontal +Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0270, 27 Circuits (https://www.molex.com/pdm_docs/sd/2005280270_sd.pdf), generated with kicad-footprint-generator +connector Molex top entry +0 +29 +28 +Connector_FFC-FPC +Molex_200528-0280_1x28-1MP_P1.00mm_Horizontal +Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0280, 28 Circuits (https://www.molex.com/pdm_docs/sd/2005280280_sd.pdf), generated with kicad-footprint-generator +connector Molex top entry +0 +30 +29 +Connector_FFC-FPC +Molex_200528-0290_1x29-1MP_P1.00mm_Horizontal +Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0290, 29 Circuits (https://www.molex.com/pdm_docs/sd/2005280290_sd.pdf), generated with kicad-footprint-generator +connector Molex top entry +0 +31 +30 +Connector_FFC-FPC +Molex_200528-0300_1x30-1MP_P1.00mm_Horizontal +Molex Molex 1.00mm Pitch Easy-On BackFlip, Right-Angle, Bottom Contact FFC/FPC, 200528-0300, 30 Circuits (https://www.molex.com/pdm_docs/sd/2005280300_sd.pdf), generated with kicad-footprint-generator +connector Molex top entry +0 +32 +31 +Connector_FFC-FPC +Molex_502231-1500_1x15-1SH_P0.5mm_Vertical +Molex 0.50mm Pitch Easy-On Type FFC/FPC Connector, For LVDS, 6.05mm Height, Vertical, Surface Mount, ZIF, 15 Circuits (https://www.molex.com/pdm_docs/sd/5022311500_sd.pdf) +molex FFC/FPC connector Pitch 0.5mm vertical +0 +17 +16 +Connector_FFC-FPC +Molex_502231-2400_1x24-1SH_P0.5mm_Vertical +Molex 0.50mm Pitch Easy-On Type FFC/FPC Connector, For LVDS, 6.05mm Height, Vertical, Surface Mount, ZIF, 24 Circuits (https://www.molex.com/pdm_docs/sd/5022312400_sd.pdf) +molex FFC/FPC connector Pitch 0.5mm vertical +0 +26 +25 +Connector_FFC-FPC +Molex_502231-3300_1x33-1SH_P0.5mm_Vertical +Molex 0.50mm Pitch Easy-On Type FFC/FPC Connector, For LVDS, 6.05mm Height, Vertical, Surface Mount, ZIF, 33 Circuits (https://www.molex.com/pdm_docs/sd/5022313300_sd.pdf) +molex FFC/FPC connector Pitch 0.5mm vertical +0 +36 +34 +Connector_FFC-FPC +Molex_502244-1530_1x15-1MP_P0.5mm_Horizontal +Molex 0.50mm Pitch Easy-On Type FFC/FPC Connector, For LVDS, 2.33mm Height, Right Angle, Surface Mount, ZIF, Bottom Contact Style, 15 Circuits (http://www.molex.com/pdm_docs/sd/5022441530_sd.pdf) +molex FFC/FPC connector Pitch 0.5mm right angle +0 +19 +16 +Connector_FFC-FPC +Molex_502244-2430_1x24-1MP_P0.5mm_Horizontal +Molex 0.50mm Pitch Easy-On Type FFC/FPC Connector, For LVDS, 2.33mm Height, Right Angle, Surface Mount, ZIF, Bottom Contact Style, 24 Circuits (http://www.molex.com/pdm_docs/sd/5022441530_sd.pdf) +molex FFC/FPC connector Pitch 0.5mm right angle +0 +28 +25 +Connector_FFC-FPC +Molex_502244-3330_1x33-1MP_P0.5mm_Horizontal +Molex 0.50mm Pitch Easy-On Type FFC/FPC Connector, For LVDS, 2.33mm Height, Right Angle, Surface Mount, ZIF, Bottom Contact Style, 33 Circuits (http://www.molex.com/pdm_docs/sd/5022441530_sd.pdf) +molex FFC/FPC connector Pitch 0.5mm right angle +0 +39 +34 +Connector_FFC-FPC +Molex_502250-1791_2Rows-17Pins-1MP_P0.60mm_Horizontal +Molex Molex 0.30mm Pitch Easy-On BackFlip Type FFC/FPC, 502250-1791, 17 Circuits (http://www.molex.com/pdm_docs/sd/5022501791_sd.pdf), generated with kicad-footprint-generator +connector Molex top entry +0 +19 +18 +Connector_FFC-FPC +Molex_502250-2191_2Rows-21Pins-1MP_P0.60mm_Horizontal +Molex Molex 0.30mm Pitch Easy-On BackFlip Type FFC/FPC, 502250-2191, 21 Circuits (http://www.molex.com/pdm_docs/sd/5022502191_sd.pdf), generated with kicad-footprint-generator +connector Molex top entry +0 +23 +22 +Connector_FFC-FPC +Molex_502250-2391_2Rows-23Pins-1MP_P0.60mm_Horizontal +Molex Molex 0.30mm Pitch Easy-On BackFlip Type FFC/FPC, 502250-2391, 23 Circuits (http://www.molex.com/pdm_docs/sd/5022502391_sd.pdf), generated with kicad-footprint-generator +connector Molex top entry +0 +25 +24 +Connector_FFC-FPC +Molex_502250-2791_2Rows-27Pins-1MP_P0.60mm_Horizontal +Molex Molex 0.30mm Pitch Easy-On BackFlip Type FFC/FPC, 502250-2791, 27 Circuits (http://www.molex.com/pdm_docs/sd/5022502791_sd.pdf), generated with kicad-footprint-generator +connector Molex top entry +0 +29 +28 +Connector_FFC-FPC +Molex_502250-3391_2Rows-33Pins-1MP_P0.60mm_Horizontal +Molex Molex 0.30mm Pitch Easy-On BackFlip Type FFC/FPC, 502250-3391, 33 Circuits (http://www.molex.com/pdm_docs/sd/5022503391_sd.pdf), generated with kicad-footprint-generator +connector Molex top entry +0 +35 +34 +Connector_FFC-FPC +Molex_502250-3591_2Rows-35Pins-1MP_P0.60mm_Horizontal +Molex Molex 0.30mm Pitch Easy-On BackFlip Type FFC/FPC, 502250-3591, 35 Circuits (http://www.molex.com/pdm_docs/sd/5022503591_sd.pdf), generated with kicad-footprint-generator +connector Molex top entry +0 +37 +36 +Connector_FFC-FPC +Molex_502250-3991_2Rows-39Pins-1MP_P0.60mm_Horizontal +Molex Molex 0.30mm Pitch Easy-On BackFlip Type FFC/FPC, 502250-3991, 39 Circuits (http://www.molex.com/pdm_docs/sd/5022503991_sd.pdf), generated with kicad-footprint-generator +connector Molex top entry +0 +41 +40 +Connector_FFC-FPC +Molex_502250-4191_2Rows-41Pins-1MP_P0.60mm_Horizontal +Molex Molex 0.30mm Pitch Easy-On BackFlip Type FFC/FPC, 502250-4191, 41 Circuits (http://www.molex.com/pdm_docs/sd/5022504191_sd.pdf), generated with kicad-footprint-generator +connector Molex top entry +0 +43 +42 +Connector_FFC-FPC +Molex_502250-5191_2Rows-51Pins-1MP_P0.60mm_Horizontal +Molex Molex 0.30mm Pitch Easy-On BackFlip Type FFC/FPC, 502250-5191, 51 Circuits (http://www.molex.com/pdm_docs/sd/5022505191_sd.pdf), generated with kicad-footprint-generator +connector Molex top entry +0 +53 +52 +Connector_FFC-FPC +Omron_XF2M-4015-1A_1x40-1MP_P0.5mm_Horizontal +Omron FPC connector, 40 top-side contacts, 0.5mm pitch, SMT, https://omronfs.omron.com/en_US/ecb/products/pdf/en-xf2m.pdf +omron fpc xf2m +0 +42 +41 +Connector_FFC-FPC +TE_0-1734839-5_1x05-1MP_P0.5mm_Horizontal +TE FPC connector, 05 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +7 +6 +Connector_FFC-FPC +TE_0-1734839-6_1x06-1MP_P0.5mm_Horizontal +TE FPC connector, 06 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +8 +7 +Connector_FFC-FPC +TE_0-1734839-7_1x07-1MP_P0.5mm_Horizontal +TE FPC connector, 07 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +9 +8 +Connector_FFC-FPC +TE_0-1734839-8_1x08-1MP_P0.5mm_Horizontal +TE FPC connector, 08 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +10 +9 +Connector_FFC-FPC +TE_0-1734839-9_1x09-1MP_P0.5mm_Horizontal +TE FPC connector, 09 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +11 +10 +Connector_FFC-FPC +TE_1-84952-0_1x10-1MP_P1.0mm_Horizontal +TE FPC connector, 10 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4 +te fpc 84952 +0 +12 +11 +Connector_FFC-FPC +TE_1-84952-1_1x11-1MP_P1.0mm_Horizontal +TE FPC connector, 11 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4 +te fpc 84952 +0 +13 +12 +Connector_FFC-FPC +TE_1-84952-2_1x12-1MP_P1.0mm_Horizontal +TE FPC connector, 12 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4 +te fpc 84952 +0 +14 +13 +Connector_FFC-FPC +TE_1-84952-3_1x13-1MP_P1.0mm_Horizontal +TE FPC connector, 13 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4 +te fpc 84952 +0 +15 +14 +Connector_FFC-FPC +TE_1-84952-4_1x14-1MP_P1.0mm_Horizontal +TE FPC connector, 14 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4 +te fpc 84952 +0 +16 +15 +Connector_FFC-FPC +TE_1-84952-5_1x15-1MP_P1.0mm_Horizontal +TE FPC connector, 15 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4 +te fpc 84952 +0 +17 +16 +Connector_FFC-FPC +TE_1-84952-6_1x16-1MP_P1.0mm_Horizontal +TE FPC connector, 16 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4 +te fpc 84952 +0 +18 +17 +Connector_FFC-FPC +TE_1-84952-7_1x17-1MP_P1.0mm_Horizontal +TE FPC connector, 17 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4 +te fpc 84952 +0 +19 +18 +Connector_FFC-FPC +TE_1-84952-8_1x18-1MP_P1.0mm_Horizontal +TE FPC connector, 18 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4 +te fpc 84952 +0 +20 +19 +Connector_FFC-FPC +TE_1-84952-9_1x19-1MP_P1.0mm_Horizontal +TE FPC connector, 19 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4 +te fpc 84952 +0 +21 +20 +Connector_FFC-FPC +TE_1-84953-0_1x10-1MP_P1.0mm_Horizontal +TE FPC connector, 10 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4 +te fpc 84953 +0 +12 +11 +Connector_FFC-FPC +TE_1-84953-1_1x11-1MP_P1.0mm_Horizontal +TE FPC connector, 11 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4 +te fpc 84953 +0 +13 +12 +Connector_FFC-FPC +TE_1-84953-2_1x12-1MP_P1.0mm_Horizontal +TE FPC connector, 12 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4 +te fpc 84953 +0 +14 +13 +Connector_FFC-FPC +TE_1-84953-3_1x13-1MP_P1.0mm_Horizontal +TE FPC connector, 13 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4 +te fpc 84953 +0 +15 +14 +Connector_FFC-FPC +TE_1-84953-4_1x14-1MP_P1.0mm_Horizontal +TE FPC connector, 14 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4 +te fpc 84953 +0 +16 +15 +Connector_FFC-FPC +TE_1-84953-5_1x15-1MP_P1.0mm_Horizontal +TE FPC connector, 15 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4 +te fpc 84953 +0 +17 +16 +Connector_FFC-FPC +TE_1-84953-6_1x16-1MP_P1.0mm_Horizontal +TE FPC connector, 16 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4 +te fpc 84953 +0 +18 +17 +Connector_FFC-FPC +TE_1-84953-7_1x17-1MP_P1.0mm_Horizontal +TE FPC connector, 17 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4 +te fpc 84953 +0 +19 +18 +Connector_FFC-FPC +TE_1-84953-8_1x18-1MP_P1.0mm_Horizontal +TE FPC connector, 18 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4 +te fpc 84953 +0 +20 +19 +Connector_FFC-FPC +TE_1-84953-9_1x19-1MP_P1.0mm_Horizontal +TE FPC connector, 19 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4 +te fpc 84953 +0 +21 +20 +Connector_FFC-FPC +TE_1-1734839-0_1x10-1MP_P0.5mm_Horizontal +TE FPC connector, 10 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +12 +11 +Connector_FFC-FPC +TE_1-1734839-1_1x11-1MP_P0.5mm_Horizontal +TE FPC connector, 11 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +13 +12 +Connector_FFC-FPC +TE_1-1734839-2_1x12-1MP_P0.5mm_Horizontal +TE FPC connector, 12 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +14 +13 +Connector_FFC-FPC +TE_1-1734839-3_1x13-1MP_P0.5mm_Horizontal +TE FPC connector, 13 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +15 +14 +Connector_FFC-FPC +TE_1-1734839-4_1x14-1MP_P0.5mm_Horizontal +TE FPC connector, 14 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +16 +15 +Connector_FFC-FPC +TE_1-1734839-5_1x15-1MP_P0.5mm_Horizontal +TE FPC connector, 15 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +17 +16 +Connector_FFC-FPC +TE_1-1734839-6_1x16-1MP_P0.5mm_Horizontal +TE FPC connector, 16 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +18 +17 +Connector_FFC-FPC +TE_1-1734839-7_1x17-1MP_P0.5mm_Horizontal +TE FPC connector, 17 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +19 +18 +Connector_FFC-FPC +TE_1-1734839-8_1x18-1MP_P0.5mm_Horizontal +TE FPC connector, 18 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +20 +19 +Connector_FFC-FPC +TE_1-1734839-9_1x19-1MP_P0.5mm_Horizontal +TE FPC connector, 19 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +21 +20 +Connector_FFC-FPC +TE_2-84952-0_1x20-1MP_P1.0mm_Horizontal +TE FPC connector, 20 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4 +te fpc 84952 +0 +22 +21 +Connector_FFC-FPC +TE_2-84952-1_1x21-1MP_P1.0mm_Horizontal +TE FPC connector, 21 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4 +te fpc 84952 +0 +23 +22 +Connector_FFC-FPC +TE_2-84952-2_1x22-1MP_P1.0mm_Horizontal +TE FPC connector, 22 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4 +te fpc 84952 +0 +24 +23 +Connector_FFC-FPC +TE_2-84952-3_1x23-1MP_P1.0mm_Horizontal +TE FPC connector, 23 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4 +te fpc 84952 +0 +25 +24 +Connector_FFC-FPC +TE_2-84952-4_1x24-1MP_P1.0mm_Horizontal +TE FPC connector, 24 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4 +te fpc 84952 +0 +26 +25 +Connector_FFC-FPC +TE_2-84952-5_1x25-1MP_P1.0mm_Horizontal +TE FPC connector, 25 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4 +te fpc 84952 +0 +27 +26 +Connector_FFC-FPC +TE_2-84952-6_1x26-1MP_P1.0mm_Horizontal +TE FPC connector, 26 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4 +te fpc 84952 +0 +28 +27 +Connector_FFC-FPC +TE_2-84952-7_1x27-1MP_P1.0mm_Horizontal +TE FPC connector, 27 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4 +te fpc 84952 +0 +29 +28 +Connector_FFC-FPC +TE_2-84952-8_1x28-1MP_P1.0mm_Horizontal +TE FPC connector, 28 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4 +te fpc 84952 +0 +30 +29 +Connector_FFC-FPC +TE_2-84952-9_1x29-1MP_P1.0mm_Horizontal +TE FPC connector, 29 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4 +te fpc 84952 +0 +31 +30 +Connector_FFC-FPC +TE_2-84953-0_1x20-1MP_P1.0mm_Horizontal +TE FPC connector, 20 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4 +te fpc 84953 +0 +22 +21 +Connector_FFC-FPC +TE_2-84953-1_1x21-1MP_P1.0mm_Horizontal +TE FPC connector, 21 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4 +te fpc 84953 +0 +23 +22 +Connector_FFC-FPC +TE_2-84953-2_1x22-1MP_P1.0mm_Horizontal +TE FPC connector, 22 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4 +te fpc 84953 +0 +24 +23 +Connector_FFC-FPC +TE_2-84953-3_1x23-1MP_P1.0mm_Horizontal +TE FPC connector, 23 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4 +te fpc 84953 +0 +25 +24 +Connector_FFC-FPC +TE_2-84953-4_1x24-1MP_P1.0mm_Horizontal +TE FPC connector, 24 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4 +te fpc 84953 +0 +26 +25 +Connector_FFC-FPC +TE_2-84953-5_1x25-1MP_P1.0mm_Horizontal +TE FPC connector, 25 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4 +te fpc 84953 +0 +27 +26 +Connector_FFC-FPC +TE_2-84953-6_1x26-1MP_P1.0mm_Horizontal +TE FPC connector, 26 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4 +te fpc 84953 +0 +28 +27 +Connector_FFC-FPC +TE_2-84953-7_1x27-1MP_P1.0mm_Horizontal +TE FPC connector, 27 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4 +te fpc 84953 +0 +29 +28 +Connector_FFC-FPC +TE_2-84953-8_1x28-1MP_P1.0mm_Horizontal +TE FPC connector, 28 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4 +te fpc 84953 +0 +30 +29 +Connector_FFC-FPC +TE_2-84953-9_1x29-1MP_P1.0mm_Horizontal +TE FPC connector, 29 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4 +te fpc 84953 +0 +31 +30 +Connector_FFC-FPC +TE_2-1734839-0_1x20-1MP_P0.5mm_Horizontal +TE FPC connector, 20 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +22 +21 +Connector_FFC-FPC +TE_2-1734839-1_1x21-1MP_P0.5mm_Horizontal +TE FPC connector, 21 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +23 +22 +Connector_FFC-FPC +TE_2-1734839-2_1x22-1MP_P0.5mm_Horizontal +TE FPC connector, 22 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +24 +23 +Connector_FFC-FPC +TE_2-1734839-3_1x23-1MP_P0.5mm_Horizontal +TE FPC connector, 23 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +25 +24 +Connector_FFC-FPC +TE_2-1734839-4_1x24-1MP_P0.5mm_Horizontal +TE FPC connector, 24 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +26 +25 +Connector_FFC-FPC +TE_2-1734839-5_1x25-1MP_P0.5mm_Horizontal +TE FPC connector, 25 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +27 +26 +Connector_FFC-FPC +TE_2-1734839-6_1x26-1MP_P0.5mm_Horizontal +TE FPC connector, 26 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +28 +27 +Connector_FFC-FPC +TE_2-1734839-7_1x27-1MP_P0.5mm_Horizontal +TE FPC connector, 27 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +29 +28 +Connector_FFC-FPC +TE_2-1734839-8_1x28-1MP_P0.5mm_Horizontal +TE FPC connector, 28 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +30 +29 +Connector_FFC-FPC +TE_2-1734839-9_1x29-1MP_P0.5mm_Horizontal +TE FPC connector, 29 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +31 +30 +Connector_FFC-FPC +TE_3-84952-0_1x30-1MP_P1.0mm_Horizontal +TE FPC connector, 30 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4 +te fpc 84952 +0 +32 +31 +Connector_FFC-FPC +TE_3-84953-0_1x30-1MP_P1.0mm_Horizontal +TE FPC connector, 30 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4 +te fpc 84953 +0 +32 +31 +Connector_FFC-FPC +TE_3-1734839-0_1x30-1MP_P0.5mm_Horizontal +TE FPC connector, 30 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +32 +31 +Connector_FFC-FPC +TE_3-1734839-1_1x31-1MP_P0.5mm_Horizontal +TE FPC connector, 31 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +33 +32 +Connector_FFC-FPC +TE_3-1734839-2_1x32-1MP_P0.5mm_Horizontal +TE FPC connector, 32 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +34 +33 +Connector_FFC-FPC +TE_3-1734839-3_1x33-1MP_P0.5mm_Horizontal +TE FPC connector, 33 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +35 +34 +Connector_FFC-FPC +TE_3-1734839-4_1x34-1MP_P0.5mm_Horizontal +TE FPC connector, 34 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +36 +35 +Connector_FFC-FPC +TE_3-1734839-5_1x35-1MP_P0.5mm_Horizontal +TE FPC connector, 35 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +37 +36 +Connector_FFC-FPC +TE_3-1734839-6_1x36-1MP_P0.5mm_Horizontal +TE FPC connector, 36 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +38 +37 +Connector_FFC-FPC +TE_3-1734839-7_1x37-1MP_P0.5mm_Horizontal +TE FPC connector, 37 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +39 +38 +Connector_FFC-FPC +TE_3-1734839-8_1x38-1MP_P0.5mm_Horizontal +TE FPC connector, 38 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +40 +39 +Connector_FFC-FPC +TE_3-1734839-9_1x39-1MP_P0.5mm_Horizontal +TE FPC connector, 39 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +41 +40 +Connector_FFC-FPC +TE_4-1734839-0_1x40-1MP_P0.5mm_Horizontal +TE FPC connector, 40 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +42 +41 +Connector_FFC-FPC +TE_4-1734839-1_1x41-1MP_P0.5mm_Horizontal +TE FPC connector, 41 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +43 +42 +Connector_FFC-FPC +TE_4-1734839-2_1x42-1MP_P0.5mm_Horizontal +TE FPC connector, 42 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +44 +43 +Connector_FFC-FPC +TE_4-1734839-3_1x43-1MP_P0.5mm_Horizontal +TE FPC connector, 43 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +45 +44 +Connector_FFC-FPC +TE_4-1734839-4_1x44-1MP_P0.5mm_Horizontal +TE FPC connector, 44 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +46 +45 +Connector_FFC-FPC +TE_4-1734839-5_1x45-1MP_P0.5mm_Horizontal +TE FPC connector, 45 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +47 +46 +Connector_FFC-FPC +TE_4-1734839-6_1x46-1MP_P0.5mm_Horizontal +TE FPC connector, 46 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +48 +47 +Connector_FFC-FPC +TE_4-1734839-7_1x47-1MP_P0.5mm_Horizontal +TE FPC connector, 47 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +49 +48 +Connector_FFC-FPC +TE_4-1734839-8_1x48-1MP_P0.5mm_Horizontal +TE FPC connector, 48 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +50 +49 +Connector_FFC-FPC +TE_4-1734839-9_1x49-1MP_P0.5mm_Horizontal +TE FPC connector, 49 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +51 +50 +Connector_FFC-FPC +TE_5-1734839-0_1x50-1MP_P0.5mm_Horizontal +TE FPC connector, 50 top-side contacts, 0.5mm pitch, SMT, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1734839%7FC%7Fpdf%7FEnglish%7FENG_CD_1734839_C_C_1734839.pdf%7F4-1734839-0 +te fpc 1734839 +0 +52 +51 +Connector_FFC-FPC +TE_84952-4_1x04-1MP_P1.0mm_Horizontal +TE FPC connector, 04 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4 +te fpc 84952 +0 +6 +5 +Connector_FFC-FPC +TE_84952-5_1x05-1MP_P1.0mm_Horizontal +TE FPC connector, 05 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4 +te fpc 84952 +0 +7 +6 +Connector_FFC-FPC +TE_84952-6_1x06-1MP_P1.0mm_Horizontal +TE FPC connector, 06 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4 +te fpc 84952 +0 +8 +7 +Connector_FFC-FPC +TE_84952-7_1x07-1MP_P1.0mm_Horizontal +TE FPC connector, 07 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4 +te fpc 84952 +0 +9 +8 +Connector_FFC-FPC +TE_84952-8_1x08-1MP_P1.0mm_Horizontal +TE FPC connector, 08 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4 +te fpc 84952 +0 +10 +9 +Connector_FFC-FPC +TE_84952-9_1x09-1MP_P1.0mm_Horizontal +TE FPC connector, 09 bottom-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84952&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84952-4 +te fpc 84952 +0 +11 +10 +Connector_FFC-FPC +TE_84953-4_1x04-1MP_P1.0mm_Horizontal +TE FPC connector, 04 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4 +te fpc 84953 +0 +6 +5 +Connector_FFC-FPC +TE_84953-5_1x05-1MP_P1.0mm_Horizontal +TE FPC connector, 05 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4 +te fpc 84953 +0 +7 +6 +Connector_FFC-FPC +TE_84953-6_1x06-1MP_P1.0mm_Horizontal +TE FPC connector, 06 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4 +te fpc 84953 +0 +8 +7 +Connector_FFC-FPC +TE_84953-7_1x07-1MP_P1.0mm_Horizontal +TE FPC connector, 07 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4 +te fpc 84953 +0 +9 +8 +Connector_FFC-FPC +TE_84953-8_1x08-1MP_P1.0mm_Horizontal +TE FPC connector, 08 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4 +te fpc 84953 +0 +10 +9 +Connector_FFC-FPC +TE_84953-9_1x09-1MP_P1.0mm_Horizontal +TE FPC connector, 09 top-side contacts, 1.0mm pitch, 1.0mm height, SMT, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=84953&DocType=Customer+Drawing&DocLang=English&DocFormat=pdf&PartCntxt=84953-4 +te fpc 84953 +0 +11 +10 +Connector_FFC-FPC +Wuerth_68611214422_1x12-1MP_P1.0mm_Horizontal +http://katalog.we-online.de/em/datasheet/68611214422.pdf +Wuerth FPC 68611214422 connector 12 bottom-side contacts 1.0mm pitch 1.0mm height SMT +0 +14 +13 +Connector_HDMI +HDMI_A_Amphenol_10029449-x01xLF_Horizontal +HDMI Type A connector, Amphenol 10029449-001TLF 10029449-001RLF 10029449-101TLF 10029449-101RLF, Right Angle(https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/10029449.pdf) +hdmi right angle +0 +23 +20 +Connector_HDMI +HDMI_A_Contact_Technology_HDMI-19APL2_Horizontal +HDMI Contact Technology Type A http://www.contactswitch.com/en/download.aspx?id=1449 +HDMI Contact Technology Type A +0 +23 +20 +Connector_HDMI +HDMI_A_Kycon_KDMIX-SL1-NS-WS-B15_VerticalRightAngle +HDMI, Type A, Kycon KDMIX-SL1-NS-WS-B15, Vertical Right Angle, http://www.kycon.com/Pub_Eng_Draw/KDMIX-SL1-NS-WS-B15.pdf +hdmi type a +0 +23 +20 +Connector_HDMI +HDMI_A_Molex_208658-1001_Horizontal +HDMI Molex Type A https://www.molex.com/pdm_docs/sd/2086581001_sd.pdf +HDMI Molex Type A +0 +23 +20 +Connector_HDMI +HDMI_Micro-D_Molex_46765-0x01 +HDMI, Micro, Type D, SMD, 0.4mm pitch, 19 ckt, right angle (http://www.molex.com/pdm_docs/sd/467651301_sd.pdf) +hdmi micro type d right angle smd +0 +23 +20 +Connector_HDMI +HDMI_Micro-D_Molex_46765-1x01 +HDMI, Micro, Type D, THT, 0.4mm pitch, 19 ckt, right angle (http://www.molex.com/pdm_docs/sd/467651301_sd.pdf) +hdmi micro type d right angle tht +0 +23 +20 +Connector_HDMI +HDMI_Micro-D_Molex_46765-2x0x +HDMI, Micro, Type D, THT/SMD hybrid, 0.4mm pitch, 19 ckt, right angle (http://www.molex.com/pdm_docs/sd/467651301_sd.pdf) +hdmi micro type d right angle tht smd hybrid +0 +23 +20 +Connector_Harting +Harting_har-flexicon_14110213001xxx_1x02-MP_P2.54mm_Vertical +Harting har-flexicon series connector, 14110213001xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13001XXX_100228421DRW046C.pdf), generated with kicad-footprint-generator +connector Harting har-flexicon vertical +0 +4 +3 +Connector_Harting +Harting_har-flexicon_14110213002xxx_1x02-MP_P2.54mm_Horizontal +Harting har-flexicon series connector, 14110213002xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13002XXX_100228421DRW035C.pdf), generated with kicad-footprint-generator +connector Harting har-flexicon horizontal +0 +4 +3 +Connector_Harting +Harting_har-flexicon_14110213010xxx_1x02-MP_P2.54mm_Horizontal +Harting har-flexicon series connector, 14110213010xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13010XXX_100228421DRW063C.pdf), generated with kicad-footprint-generator +connector Harting har-flexicon horizontal +0 +4 +3 +Connector_Harting +Harting_har-flexicon_14110313001xxx_1x03-MP_P2.54mm_Vertical +Harting har-flexicon series connector, 14110313001xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13001XXX_100228421DRW046C.pdf), generated with kicad-footprint-generator +connector Harting har-flexicon vertical +0 +5 +4 +Connector_Harting +Harting_har-flexicon_14110313002xxx_1x03-MP_P2.54mm_Horizontal +Harting har-flexicon series connector, 14110313002xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13002XXX_100228421DRW035C.pdf), generated with kicad-footprint-generator +connector Harting har-flexicon horizontal +0 +5 +4 +Connector_Harting +Harting_har-flexicon_14110313010xxx_1x03-MP_P2.54mm_Horizontal +Harting har-flexicon series connector, 14110313010xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13010XXX_100228421DRW063C.pdf), generated with kicad-footprint-generator +connector Harting har-flexicon horizontal +0 +5 +4 +Connector_Harting +Harting_har-flexicon_14110413001xxx_1x04-MP_P2.54mm_Vertical +Harting har-flexicon series connector, 14110413001xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13001XXX_100228421DRW046C.pdf), generated with kicad-footprint-generator +connector Harting har-flexicon vertical +0 +6 +5 +Connector_Harting +Harting_har-flexicon_14110413002xxx_1x04-MP_P2.54mm_Horizontal +Harting har-flexicon series connector, 14110413002xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13002XXX_100228421DRW035C.pdf), generated with kicad-footprint-generator +connector Harting har-flexicon horizontal +0 +6 +5 +Connector_Harting +Harting_har-flexicon_14110413010xxx_1x04-MP_P2.54mm_Horizontal +Harting har-flexicon series connector, 14110413010xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13010XXX_100228421DRW063C.pdf), generated with kicad-footprint-generator +connector Harting har-flexicon horizontal +0 +6 +5 +Connector_Harting +Harting_har-flexicon_14110513001xxx_1x05-MP_P2.54mm_Vertical +Harting har-flexicon series connector, 14110513001xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13001XXX_100228421DRW046C.pdf), generated with kicad-footprint-generator +connector Harting har-flexicon vertical +0 +7 +6 +Connector_Harting +Harting_har-flexicon_14110513002xxx_1x05-MP_P2.54mm_Horizontal +Harting har-flexicon series connector, 14110513002xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13002XXX_100228421DRW035C.pdf), generated with kicad-footprint-generator +connector Harting har-flexicon horizontal +0 +7 +6 +Connector_Harting +Harting_har-flexicon_14110513010xxx_1x05-MP_P2.54mm_Horizontal +Harting har-flexicon series connector, 14110513010xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13010XXX_100228421DRW063C.pdf), generated with kicad-footprint-generator +connector Harting har-flexicon horizontal +0 +7 +6 +Connector_Harting +Harting_har-flexicon_14110613001xxx_1x06-MP_P2.54mm_Vertical +Harting har-flexicon series connector, 14110613001xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13001XXX_100228421DRW046C.pdf), generated with kicad-footprint-generator +connector Harting har-flexicon vertical +0 +8 +7 +Connector_Harting +Harting_har-flexicon_14110613002xxx_1x06-MP_P2.54mm_Horizontal +Harting har-flexicon series connector, 14110613002xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13002XXX_100228421DRW035C.pdf), generated with kicad-footprint-generator +connector Harting har-flexicon horizontal +0 +8 +7 +Connector_Harting +Harting_har-flexicon_14110613010xxx_1x06-MP_P2.54mm_Horizontal +Harting har-flexicon series connector, 14110613010xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13010XXX_100228421DRW063C.pdf), generated with kicad-footprint-generator +connector Harting har-flexicon horizontal +0 +8 +7 +Connector_Harting +Harting_har-flexicon_14110713001xxx_1x07-MP_P2.54mm_Vertical +Harting har-flexicon series connector, 14110713001xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13001XXX_100228421DRW046C.pdf), generated with kicad-footprint-generator +connector Harting har-flexicon vertical +0 +9 +8 +Connector_Harting +Harting_har-flexicon_14110713002xxx_1x07-MP_P2.54mm_Horizontal +Harting har-flexicon series connector, 14110713002xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13002XXX_100228421DRW035C.pdf), generated with kicad-footprint-generator +connector Harting har-flexicon horizontal +0 +9 +8 +Connector_Harting +Harting_har-flexicon_14110713010xxx_1x07-MP_P2.54mm_Horizontal +Harting har-flexicon series connector, 14110713010xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13010XXX_100228421DRW063C.pdf), generated with kicad-footprint-generator +connector Harting har-flexicon horizontal +0 +9 +8 +Connector_Harting +Harting_har-flexicon_14110813001xxx_1x08-MP_P2.54mm_Vertical +Harting har-flexicon series connector, 14110813001xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13001XXX_100228421DRW046C.pdf), generated with kicad-footprint-generator +connector Harting har-flexicon vertical +0 +10 +9 +Connector_Harting +Harting_har-flexicon_14110813002xxx_1x08-MP_P2.54mm_Horizontal +Harting har-flexicon series connector, 14110813002xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13002XXX_100228421DRW035C.pdf), generated with kicad-footprint-generator +connector Harting har-flexicon horizontal +0 +10 +9 +Connector_Harting +Harting_har-flexicon_14110813010xxx_1x08-MP_P2.54mm_Horizontal +Harting har-flexicon series connector, 14110813010xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13010XXX_100228421DRW063C.pdf), generated with kicad-footprint-generator +connector Harting har-flexicon horizontal +0 +10 +9 +Connector_Harting +Harting_har-flexicon_14110913001xxx_1x09-MP_P2.54mm_Vertical +Harting har-flexicon series connector, 14110913001xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13001XXX_100228421DRW046C.pdf), generated with kicad-footprint-generator +connector Harting har-flexicon vertical +0 +11 +10 +Connector_Harting +Harting_har-flexicon_14110913002xxx_1x09-MP_P2.54mm_Horizontal +Harting har-flexicon series connector, 14110913002xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13002XXX_100228421DRW035C.pdf), generated with kicad-footprint-generator +connector Harting har-flexicon horizontal +0 +11 +10 +Connector_Harting +Harting_har-flexicon_14110913010xxx_1x09-MP_P2.54mm_Horizontal +Harting har-flexicon series connector, 14110913010xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13010XXX_100228421DRW063C.pdf), generated with kicad-footprint-generator +connector Harting har-flexicon horizontal +0 +11 +10 +Connector_Harting +Harting_har-flexicon_14111013001xxx_1x10-MP_P2.54mm_Vertical +Harting har-flexicon series connector, 14111013001xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13001XXX_100228421DRW046C.pdf), generated with kicad-footprint-generator +connector Harting har-flexicon vertical +0 +12 +11 +Connector_Harting +Harting_har-flexicon_14111013002xxx_1x10-MP_P2.54mm_Horizontal +Harting har-flexicon series connector, 14111013002xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13002XXX_100228421DRW035C.pdf), generated with kicad-footprint-generator +connector Harting har-flexicon horizontal +0 +12 +11 +Connector_Harting +Harting_har-flexicon_14111013010xxx_1x10-MP_P2.54mm_Horizontal +Harting har-flexicon series connector, 14111013010xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13010XXX_100228421DRW063C.pdf), generated with kicad-footprint-generator +connector Harting har-flexicon horizontal +0 +12 +11 +Connector_Harting +Harting_har-flexicon_14111113001xxx_1x11-MP_P2.54mm_Vertical +Harting har-flexicon series connector, 14111113001xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13001XXX_100228421DRW046C.pdf), generated with kicad-footprint-generator +connector Harting har-flexicon vertical +0 +13 +12 +Connector_Harting +Harting_har-flexicon_14111113002xxx_1x11-MP_P2.54mm_Horizontal +Harting har-flexicon series connector, 14111113002xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13002XXX_100228421DRW035C.pdf), generated with kicad-footprint-generator +connector Harting har-flexicon horizontal +0 +13 +12 +Connector_Harting +Harting_har-flexicon_14111113010xxx_1x11-MP_P2.54mm_Horizontal +Harting har-flexicon series connector, 14111113010xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13010XXX_100228421DRW063C.pdf), generated with kicad-footprint-generator +connector Harting har-flexicon horizontal +0 +13 +12 +Connector_Harting +Harting_har-flexicon_14111213001xxx_1x12-MP_P2.54mm_Vertical +Harting har-flexicon series connector, 14111213001xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13001XXX_100228421DRW046C.pdf), generated with kicad-footprint-generator +connector Harting har-flexicon vertical +0 +14 +13 +Connector_Harting +Harting_har-flexicon_14111213002xxx_1x12-MP_P2.54mm_Horizontal +Harting har-flexicon series connector, 14111213002xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13002XXX_100228421DRW035C.pdf), generated with kicad-footprint-generator +connector Harting har-flexicon horizontal +0 +14 +13 +Connector_Harting +Harting_har-flexicon_14111213010xxx_1x12-MP_P2.54mm_Horizontal +Harting har-flexicon series connector, 14111213010xxx (https://b2b.harting.com/files/download/PRD/PDF_TS/1411XX13010XXX_100228421DRW063C.pdf), generated with kicad-footprint-generator +connector Harting har-flexicon horizontal +0 +14 +13 +Connector_Harwin +Harwin_Gecko-G125-FVX0605L0X_2x03_P1.25mm_Vertical +Harwin Gecko Connector, 6 pins, dual row female, vertical entry, PN:G125-FVX0605L0X +connector harwin gecko +0 +6 +6 +Connector_Harwin +Harwin_Gecko-G125-FVX1005L0X_2x05_P1.25mm_Vertical +Harwin Gecko Connector, 10 pins, dual row female, vertical entry, PN:G125-FVX1005L0X +connector harwin gecko +0 +10 +10 +Connector_Harwin +Harwin_Gecko-G125-FVX1205L0X_2x06_P1.25mm_Vertical +Harwin Gecko Connector, 12 pins, dual row female, vertical entry, PN:G125-FVX1205L0X +connector harwin gecko +0 +12 +12 +Connector_Harwin +Harwin_Gecko-G125-FVX1605L0X_2x08_P1.25mm_Vertical +Harwin Gecko Connector, 16 pins, dual row female, vertical entry, PN:G125-FVX1605L0X +connector harwin gecko +0 +16 +16 +Connector_Harwin +Harwin_Gecko-G125-FVX2005L0X_2x10_P1.25mm_Vertical +Harwin Gecko Connector, 20 pins, dual row female, vertical entry, PN:G125-FVX2005L0X +connector harwin gecko +0 +20 +20 +Connector_Harwin +Harwin_Gecko-G125-FVX2605L0X_2x13_P1.25mm_Vertical +Harwin Gecko Connector, 26 pins, dual row female, vertical entry, PN:G125-FVX2605L0X +connector harwin gecko +0 +26 +26 +Connector_Harwin +Harwin_Gecko-G125-FVX3405L0X_2x17_P1.25mm_Vertical +Harwin Gecko Connector, 34 pins, dual row female, vertical entry, PN:G125-FVX3405L0X +connector harwin gecko +0 +34 +34 +Connector_Harwin +Harwin_Gecko-G125-FVX5005L0X_2x25_P1.25mm_Vertical +Harwin Gecko Connector, 50 pins, dual row female, vertical entry, PN:G125-FVX5005L0X +connector harwin gecko +0 +50 +50 +Connector_Harwin +Harwin_Gecko-G125-MVX0605L0X_2x03_P1.25mm_Vertical +Harwin Gecko Connector, 6 pins, dual row male, vertical entry, no latches, PN:G125-MVX0605L0X +connector harwin gecko +0 +6 +6 +Connector_Harwin +Harwin_Gecko-G125-MVX0605L1X_2x03_P1.25mm_Vertical +Harwin Gecko Connector, 6 pins, dual row male, vertical entry, with latches, PN:G125-MVX0605L1X +connector harwin gecko +0 +6 +6 +Connector_Harwin +Harwin_Gecko-G125-MVX1005L0X_2x05_P1.25mm_Vertical +Harwin Gecko Connector, 10 pins, dual row male, vertical entry, no latches, PN:G125-MVX1005L0X +connector harwin gecko +0 +10 +10 +Connector_Harwin +Harwin_Gecko-G125-MVX1005L1X_2x05_P1.25mm_Vertical +Harwin Gecko Connector, 10 pins, dual row male, vertical entry, with latches, PN:G125-MVX1005L1X +connector harwin gecko +0 +10 +10 +Connector_Harwin +Harwin_Gecko-G125-MVX1205L0X_2x06_P1.25mm_Vertical +Harwin Gecko Connector, 12 pins, dual row male, vertical entry, no latches, PN:G125-MVX1205L0X +connector harwin gecko +0 +12 +12 +Connector_Harwin +Harwin_Gecko-G125-MVX1205L1X_2x06_P1.25mm_Vertical +Harwin Gecko Connector, 12 pins, dual row male, vertical entry, with latches, PN:G125-MVX1205L1X +connector harwin gecko +0 +12 +12 +Connector_Harwin +Harwin_Gecko-G125-MVX1605L0X_2x08_P1.25mm_Vertical +Harwin Gecko Connector, 16 pins, dual row male, vertical entry, no latches, PN:G125-MVX1605L0X +connector harwin gecko +0 +16 +16 +Connector_Harwin +Harwin_Gecko-G125-MVX1605L1X_2x08_P1.25mm_Vertical +Harwin Gecko Connector, 16 pins, dual row male, vertical entry, with latches, PN:G125-MVX1605L1X +connector harwin gecko +0 +16 +16 +Connector_Harwin +Harwin_Gecko-G125-MVX2005L0X_2x10_P1.25mm_Vertical +Harwin Gecko Connector, 20 pins, dual row male, vertical entry, no latches, PN:G125-MVX2005L0X +connector harwin gecko +0 +20 +20 +Connector_Harwin +Harwin_Gecko-G125-MVX2005L1X_2x10_P1.25mm_Vertical +Harwin Gecko Connector, 20 pins, dual row male, vertical entry, with latches, PN:G125-MVX2005L1X +connector harwin gecko +0 +20 +20 +Connector_Harwin +Harwin_Gecko-G125-MVX2605L0X_2x13_P1.25mm_Vertical +Harwin Gecko Connector, 26 pins, dual row male, vertical entry, no latches, PN:G125-MVX2605L0X +connector harwin gecko +0 +26 +26 +Connector_Harwin +Harwin_Gecko-G125-MVX2605L1X_2x13_P1.25mm_Vertical +Harwin Gecko Connector, 26 pins, dual row male, vertical entry, with latches, PN:G125-MVX2605L1X +connector harwin gecko +0 +26 +26 +Connector_Harwin +Harwin_Gecko-G125-MVX3405L0X_2x17_P1.25mm_Vertical +Harwin Gecko Connector, 34 pins, dual row male, vertical entry, no latches, PN:G125-MVX3405L0X +connector harwin gecko +0 +34 +34 +Connector_Harwin +Harwin_Gecko-G125-MVX3405L1X_2x17_P1.25mm_Vertical +Harwin Gecko Connector, 34 pins, dual row male, vertical entry, with latches, PN:G125-MVX3405L1X +connector harwin gecko +0 +34 +34 +Connector_Harwin +Harwin_Gecko-G125-MVX5005L0X_2x25_P1.25mm_Vertical +Harwin Gecko Connector, 50 pins, dual row male, vertical entry, no latches, PN:G125-MVX5005L0X +connector harwin gecko +0 +50 +50 +Connector_Harwin +Harwin_Gecko-G125-MVX5005L1X_2x25_P1.25mm_Vertical +Harwin Gecko Connector, 50 pins, dual row male, vertical entry, with latches, PN:G125-MVX5005L1X +connector harwin gecko +0 +50 +50 +Connector_Harwin +Harwin_LTek-Male_02_P2.00mm_Vertical +Harwin LTek Connector, 2 pins, single row male, vertical entry +connector harwin ltek M80 +0 +2 +2 +Connector_Harwin +Harwin_LTek-Male_02_P2.00mm_Vertical_StrainRelief +Harwin LTek Connector, 2 pins, single row male, vertical entry, strain relief clip +connector harwin ltek M80 +0 +6 +2 +Connector_Harwin +Harwin_LTek-Male_2x02_P2.00mm_Vertical +Harwin LTek Connector, 4 pins, single row male, vertical entry +connector harwin ltek M80 +0 +4 +4 +Connector_Harwin +Harwin_LTek-Male_2x02_P2.00mm_Vertical_StrainRelief +Harwin LTek Connector, 4 pins, single row male, vertical entry, strain relief clip +connector harwin ltek M80 +0 +8 +4 +Connector_Harwin +Harwin_LTek-Male_2x03_P2.00mm_Vertical +Harwin LTek Connector, 6 pins, single row male, vertical entry +connector harwin ltek M80 +0 +6 +6 +Connector_Harwin +Harwin_LTek-Male_2x03_P2.00mm_Vertical_StrainRelief +Harwin LTek Connector, 6 pins, single row male, vertical entry, strain relief clip +connector harwin ltek M80 +0 +10 +6 +Connector_Harwin +Harwin_LTek-Male_2x04_P2.00mm_Vertical +Harwin LTek Connector, 8 pins, single row male, vertical entry +connector harwin ltek M80 +0 +8 +8 +Connector_Harwin +Harwin_LTek-Male_2x04_P2.00mm_Vertical_StrainRelief +Harwin LTek Connector, 8 pins, single row male, vertical entry, strain relief clip +connector harwin ltek M80 +0 +12 +8 +Connector_Harwin +Harwin_LTek-Male_2x05_P2.00mm_Vertical +Harwin LTek Connector, 10 pins, single row male, vertical entry +connector harwin ltek M80 +0 +10 +10 +Connector_Harwin +Harwin_LTek-Male_2x05_P2.00mm_Vertical_StrainRelief +Harwin LTek Connector, 10 pins, single row male, vertical entry, strain relief clip +connector harwin ltek M80 +0 +14 +10 +Connector_Harwin +Harwin_LTek-Male_2x06_P2.00mm_Vertical +Harwin LTek Connector, 12 pins, single row male, vertical entry +connector harwin ltek M80 +0 +12 +12 +Connector_Harwin +Harwin_LTek-Male_2x06_P2.00mm_Vertical_StrainRelief +Harwin LTek Connector, 12 pins, single row male, vertical entry, strain relief clip +connector harwin ltek M80 +0 +16 +12 +Connector_Harwin +Harwin_LTek-Male_2x07_P2.00mm_Vertical +Harwin LTek Connector, 14 pins, single row male, vertical entry +connector harwin ltek M80 +0 +14 +14 +Connector_Harwin +Harwin_LTek-Male_2x07_P2.00mm_Vertical_StrainRelief +Harwin LTek Connector, 14 pins, single row male, vertical entry, strain relief clip +connector harwin ltek M80 +0 +18 +14 +Connector_Harwin +Harwin_LTek-Male_2x08_P2.00mm_Vertical +Harwin LTek Connector, 16 pins, single row male, vertical entry +connector harwin ltek M80 +0 +16 +16 +Connector_Harwin +Harwin_LTek-Male_2x08_P2.00mm_Vertical_StrainRelief +Harwin LTek Connector, 16 pins, single row male, vertical entry, strain relief clip +connector harwin ltek M80 +0 +20 +16 +Connector_Harwin +Harwin_LTek-Male_2x09_P2.00mm_Vertical +Harwin LTek Connector, 18 pins, single row male, vertical entry +connector harwin ltek M80 +0 +18 +18 +Connector_Harwin +Harwin_LTek-Male_2x09_P2.00mm_Vertical_StrainRelief +Harwin LTek Connector, 18 pins, single row male, vertical entry, strain relief clip +connector harwin ltek M80 +0 +22 +18 +Connector_Harwin +Harwin_LTek-Male_2x10_P2.00mm_Vertical +Harwin LTek Connector, 20 pins, single row male, vertical entry +connector harwin ltek M80 +0 +20 +20 +Connector_Harwin +Harwin_LTek-Male_2x10_P2.00mm_Vertical_StrainRelief +Harwin LTek Connector, 20 pins, single row male, vertical entry, strain relief clip +connector harwin ltek M80 +0 +24 +20 +Connector_Harwin +Harwin_LTek-Male_2x13_P2.00mm_Vertical +Harwin LTek Connector, 26 pins, single row male, vertical entry +connector harwin ltek M80 +0 +26 +26 +Connector_Harwin +Harwin_LTek-Male_2x13_P2.00mm_Vertical_StrainRelief +Harwin LTek Connector, 26 pins, single row male, vertical entry, strain relief clip +connector harwin ltek M80 +0 +30 +26 +Connector_Harwin +Harwin_LTek-Male_2x17_P2.00mm_Vertical +Harwin LTek Connector, 34 pins, single row male, vertical entry +connector harwin ltek M80 +0 +34 +34 +Connector_Harwin +Harwin_LTek-Male_2x17_P2.00mm_Vertical_StrainRelief +Harwin LTek Connector, 34 pins, single row male, vertical entry, strain relief clip +connector harwin ltek M80 +0 +38 +34 +Connector_Harwin +Harwin_LTek-Male_2x22_P2.00mm_Vertical +Harwin LTek Connector, 44 pins, single row male, vertical entry +connector harwin ltek M80 +0 +44 +44 +Connector_Harwin +Harwin_LTek-Male_2x22_P2.00mm_Vertical_StrainRelief +Harwin LTek Connector, 44 pins, single row male, vertical entry, strain relief clip +connector harwin ltek M80 +0 +48 +44 +Connector_Harwin +Harwin_LTek-Male_03_P2.00mm_Vertical +Harwin LTek Connector, 3 pins, single row male, vertical entry +connector harwin ltek M80 +0 +3 +3 +Connector_Harwin +Harwin_LTek-Male_03_P2.00mm_Vertical_StrainRelief +Harwin LTek Connector, 3 pins, single row male, vertical entry, strain relief clip +connector harwin ltek M80 +0 +7 +3 +Connector_Harwin +Harwin_LTek-Male_04_P2.00mm_Vertical +Harwin LTek Connector, 4 pins, single row male, vertical entry +connector harwin ltek M80 +0 +4 +4 +Connector_Harwin +Harwin_LTek-Male_04_P2.00mm_Vertical_StrainRelief +Harwin LTek Connector, 4 pins, single row male, vertical entry, strain relief clip +connector harwin ltek M80 +0 +8 +4 +Connector_Harwin +Harwin_LTek-Male_05_P2.00mm_Vertical +Harwin LTek Connector, 5 pins, single row male, vertical entry +connector harwin ltek M80 +0 +5 +5 +Connector_Harwin +Harwin_LTek-Male_05_P2.00mm_Vertical_StrainRelief +Harwin LTek Connector, 5 pins, single row male, vertical entry, strain relief clip +connector harwin ltek M80 +0 +9 +5 +Connector_Harwin +Harwin_LTek-Male_06_P2.00mm_Vertical +Harwin LTek Connector, 6 pins, single row male, vertical entry +connector harwin ltek M80 +0 +6 +6 +Connector_Harwin +Harwin_LTek-Male_06_P2.00mm_Vertical_StrainRelief +Harwin LTek Connector, 6 pins, single row male, vertical entry, strain relief clip +connector harwin ltek M80 +0 +10 +6 +Connector_Harwin +Harwin_LTek-Male_07_P2.00mm_Vertical +Harwin LTek Connector, 7 pins, single row male, vertical entry +connector harwin ltek M80 +0 +7 +7 +Connector_Harwin +Harwin_LTek-Male_07_P2.00mm_Vertical_StrainRelief +Harwin LTek Connector, 7 pins, single row male, vertical entry, strain relief clip +connector harwin ltek M80 +0 +11 +7 +Connector_Harwin +Harwin_LTek-Male_17_P2.00mm_Vertical +Harwin LTek Connector, 17 pins, single row male, vertical entry +connector harwin ltek M80 +0 +17 +17 +Connector_Harwin +Harwin_LTek-Male_17_P2.00mm_Vertical_StrainRelief +Harwin LTek Connector, 17 pins, single row male, vertical entry, strain relief clip +connector harwin ltek M80 +0 +21 +17 +Connector_Harwin +Harwin_LTek-Male_22_P2.00mm_Vertical +Harwin LTek Connector, 22 pins, single row male, vertical entry +connector harwin ltek M80 +0 +22 +22 +Connector_Harwin +Harwin_LTek-Male_22_P2.00mm_Vertical_StrainRelief +Harwin LTek Connector, 22 pins, single row male, vertical entry, strain relief clip +connector harwin ltek M80 +0 +26 +22 +Connector_Harwin +Harwin_M20-89003xx_1x03_P2.54mm_Horizontal +Harwin Male Horizontal Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-89003xx, 3 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator +connector Harwin M20-890 horizontal +0 +4 +3 +Connector_Harwin +Harwin_M20-89004xx_1x04_P2.54mm_Horizontal +Harwin Male Horizontal Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-89004xx, 4 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator +connector Harwin M20-890 horizontal +0 +5 +4 +Connector_Harwin +Harwin_M20-89005xx_1x05_P2.54mm_Horizontal +Harwin Male Horizontal Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-89005xx, 5 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator +connector Harwin M20-890 horizontal +0 +6 +5 +Connector_Harwin +Harwin_M20-89006xx_1x06_P2.54mm_Horizontal +Harwin Male Horizontal Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-89006xx, 6 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator +connector Harwin M20-890 horizontal +0 +7 +6 +Connector_Harwin +Harwin_M20-89007xx_1x07_P2.54mm_Horizontal +Harwin Male Horizontal Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-89007xx, 7 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator +connector Harwin M20-890 horizontal +0 +8 +7 +Connector_Harwin +Harwin_M20-89008xx_1x08_P2.54mm_Horizontal +Harwin Male Horizontal Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-89008xx, 8 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator +connector Harwin M20-890 horizontal +0 +9 +8 +Connector_Harwin +Harwin_M20-89009xx_1x09_P2.54mm_Horizontal +Harwin Male Horizontal Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-89009xx, 9 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator +connector Harwin M20-890 horizontal +0 +10 +9 +Connector_Harwin +Harwin_M20-89010xx_1x10_P2.54mm_Horizontal +Harwin Male Horizontal Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-89010xx, 10 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator +connector Harwin M20-890 horizontal +0 +11 +10 +Connector_Harwin +Harwin_M20-89011xx_1x11_P2.54mm_Horizontal +Harwin Male Horizontal Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-89011xx, 11 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator +connector Harwin M20-890 horizontal +0 +12 +11 +Connector_Harwin +Harwin_M20-89012xx_1x12_P2.54mm_Horizontal +Harwin Male Horizontal Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-89012xx, 12 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator +connector Harwin M20-890 horizontal +0 +13 +12 +Connector_Harwin +Harwin_M20-89013xx_1x13_P2.54mm_Horizontal +Harwin Male Horizontal Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-89013xx, 13 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator +connector Harwin M20-890 horizontal +0 +14 +13 +Connector_Harwin +Harwin_M20-89014xx_1x14_P2.54mm_Horizontal +Harwin Male Horizontal Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-89014xx, 14 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator +connector Harwin M20-890 horizontal +0 +15 +14 +Connector_Harwin +Harwin_M20-89015xx_1x15_P2.54mm_Horizontal +Harwin Male Horizontal Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-89015xx, 15 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator +connector Harwin M20-890 horizontal +0 +16 +15 +Connector_Harwin +Harwin_M20-89016xx_1x16_P2.54mm_Horizontal +Harwin Male Horizontal Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-89016xx, 16 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator +connector Harwin M20-890 horizontal +0 +17 +16 +Connector_Harwin +Harwin_M20-89017xx_1x17_P2.54mm_Horizontal +Harwin Male Horizontal Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-89017xx, 17 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator +connector Harwin M20-890 horizontal +0 +18 +17 +Connector_Harwin +Harwin_M20-89018xx_1x18_P2.54mm_Horizontal +Harwin Male Horizontal Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-89018xx, 18 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator +connector Harwin M20-890 horizontal +0 +19 +18 +Connector_Harwin +Harwin_M20-89019xx_1x19_P2.54mm_Horizontal +Harwin Male Horizontal Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-89019xx, 19 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator +connector Harwin M20-890 horizontal +0 +20 +19 +Connector_Harwin +Harwin_M20-89020xx_1x20_P2.54mm_Horizontal +Harwin Male Horizontal Surface Mount Single Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-89020xx, 20 Pins per row (https://cdn.harwin.com/pdfs/M20-890.pdf), generated with kicad-footprint-generator +connector Harwin M20-890 horizontal +0 +21 +20 +Connector_Harwin +Harwin_M20-7810245_2x02_P2.54mm_Vertical +Harwin Female Vertical Surface Mount Double Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-7810245, 2 Pins per row (https://cdn.harwin.com/pdfs/M20-781.pdf), generated with kicad-footprint-generator +connector Harwin M20 side entry +0 +4 +4 +Connector_Harwin +Harwin_M20-7810345_2x03_P2.54mm_Vertical +Harwin Female Vertical Surface Mount Double Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-7810345, 3 Pins per row (https://cdn.harwin.com/pdfs/M20-781.pdf), generated with kicad-footprint-generator +connector Harwin M20 side entry +0 +6 +6 +Connector_Harwin +Harwin_M20-7810445_2x04_P2.54mm_Vertical +Harwin Female Vertical Surface Mount Double Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-7810445, 4 Pins per row (https://cdn.harwin.com/pdfs/M20-781.pdf), generated with kicad-footprint-generator +connector Harwin M20 side entry +0 +8 +8 +Connector_Harwin +Harwin_M20-7810545_2x05_P2.54mm_Vertical +Harwin Female Vertical Surface Mount Double Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-7810545, 5 Pins per row (https://cdn.harwin.com/pdfs/M20-781.pdf), generated with kicad-footprint-generator +connector Harwin M20 side entry +0 +10 +10 +Connector_Harwin +Harwin_M20-7810645_2x06_P2.54mm_Vertical +Harwin Female Vertical Surface Mount Double Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-7810645, 6 Pins per row (https://cdn.harwin.com/pdfs/M20-781.pdf), generated with kicad-footprint-generator +connector Harwin M20 side entry +0 +12 +12 +Connector_Harwin +Harwin_M20-7810745_2x07_P2.54mm_Vertical +Harwin Female Vertical Surface Mount Double Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-7810745, 7 Pins per row (https://cdn.harwin.com/pdfs/M20-781.pdf), generated with kicad-footprint-generator +connector Harwin M20 side entry +0 +14 +14 +Connector_Harwin +Harwin_M20-7810845_2x08_P2.54mm_Vertical +Harwin Female Vertical Surface Mount Double Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-7810845, 8 Pins per row (https://cdn.harwin.com/pdfs/M20-781.pdf), generated with kicad-footprint-generator +connector Harwin M20 side entry +0 +16 +16 +Connector_Harwin +Harwin_M20-7810945_2x09_P2.54mm_Vertical +Harwin Female Vertical Surface Mount Double Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-7810945, 9 Pins per row (https://cdn.harwin.com/pdfs/M20-781.pdf), generated with kicad-footprint-generator +connector Harwin M20 side entry +0 +18 +18 +Connector_Harwin +Harwin_M20-7811045_2x10_P2.54mm_Vertical +Harwin Female Vertical Surface Mount Double Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-7811045, 10 Pins per row (https://cdn.harwin.com/pdfs/M20-781.pdf), generated with kicad-footprint-generator +connector Harwin M20 side entry +0 +20 +20 +Connector_Harwin +Harwin_M20-7811245_2x12_P2.54mm_Vertical +Harwin Female Vertical Surface Mount Double Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-7811245, 12 Pins per row (https://cdn.harwin.com/pdfs/M20-781.pdf), generated with kicad-footprint-generator +connector Harwin M20 side entry +0 +24 +24 +Connector_Harwin +Harwin_M20-7811545_2x15_P2.54mm_Vertical +Harwin Female Vertical Surface Mount Double Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-7811545, 15 Pins per row (https://cdn.harwin.com/pdfs/M20-781.pdf), generated with kicad-footprint-generator +connector Harwin M20 side entry +0 +30 +30 +Connector_Harwin +Harwin_M20-7812045_2x20_P2.54mm_Vertical +Harwin Female Vertical Surface Mount Double Row 2.54mm (0.1 inch) Pitch PCB Connector, M20-7812045, 20 Pins per row (https://cdn.harwin.com/pdfs/M20-781.pdf), generated with kicad-footprint-generator +connector Harwin M20 side entry +0 +40 +40 +Connector_Hirose +Hirose_BM24_BM24-40DP-2-0.35V_2x20_P0.35mm_PowerPin2_Vertical +Hirose BM24 series connector, BM24-40DP/2-0.35V (https://www.hirose.com/product/en/download_file/key_name/BM24/category/Catalog/doc_file_id/47680/?file_category_id=4&item_id=50&is_series=1) +connector Hirose BM24 40pin header +0 +44 +42 +Connector_Hirose +Hirose_BM24_BM24-40DS-2-0.35V_2x20_P0.35mm_PowerPin2_Vertical +Hirose BM24 series connector, BM24-40DS/2-0.35V (https://www.hirose.com/product/en/download_file/key_name/BM24/category/Catalog/doc_file_id/47680/?file_category_id=4&item_id=50&is_series=1) +connector Hirose 40pin receptacle vertical +0 +42 +42 +Connector_Hirose +Hirose_DF3EA-02P-2H_1x02-1MP_P2.00mm_Horizontal +Hirose series connector, DF3EA-02P-2H (https://www.hirose.com/product/document?clcode=CL0543-0332-0-51&productname=DF3EA-5P-2H(51)&series=DF3&documenttype=2DDrawing&lang=en&documentid=0001163317), generated with kicad-footprint-generator +connector Hirose top entry +0 +4 +3 +Connector_Hirose +Hirose_DF3EA-03P-2H_1x03-1MP_P2.00mm_Horizontal +Hirose series connector, DF3EA-03P-2H (https://www.hirose.com/product/document?clcode=CL0543-0332-0-51&productname=DF3EA-5P-2H(51)&series=DF3&documenttype=2DDrawing&lang=en&documentid=0001163317), generated with kicad-footprint-generator +connector Hirose top entry +0 +5 +4 +Connector_Hirose +Hirose_DF3EA-04P-2H_1x04-1MP_P2.00mm_Horizontal +Hirose series connector, DF3EA-04P-2H (https://www.hirose.com/product/document?clcode=CL0543-0332-0-51&productname=DF3EA-5P-2H(51)&series=DF3&documenttype=2DDrawing&lang=en&documentid=0001163317), generated with kicad-footprint-generator +connector Hirose top entry +0 +6 +5 +Connector_Hirose +Hirose_DF3EA-05P-2H_1x05-1MP_P2.00mm_Horizontal +Hirose series connector, DF3EA-05P-2H (https://www.hirose.com/product/document?clcode=CL0543-0332-0-51&productname=DF3EA-5P-2H(51)&series=DF3&documenttype=2DDrawing&lang=en&documentid=0001163317), generated with kicad-footprint-generator +connector Hirose top entry +0 +7 +6 +Connector_Hirose +Hirose_DF3EA-06P-2H_1x06-1MP_P2.00mm_Horizontal +Hirose series connector, DF3EA-06P-2H (https://www.hirose.com/product/document?clcode=CL0543-0332-0-51&productname=DF3EA-5P-2H(51)&series=DF3&documenttype=2DDrawing&lang=en&documentid=0001163317), generated with kicad-footprint-generator +connector Hirose top entry +0 +8 +7 +Connector_Hirose +Hirose_DF3EA-07P-2H_1x07-1MP_P2.00mm_Horizontal +Hirose series connector, DF3EA-07P-2H (https://www.hirose.com/product/document?clcode=CL0543-0332-0-51&productname=DF3EA-5P-2H(51)&series=DF3&documenttype=2DDrawing&lang=en&documentid=0001163317), generated with kicad-footprint-generator +connector Hirose top entry +0 +9 +8 +Connector_Hirose +Hirose_DF3EA-08P-2H_1x08-1MP_P2.00mm_Horizontal +Hirose series connector, DF3EA-08P-2H (https://www.hirose.com/product/document?clcode=CL0543-0332-0-51&productname=DF3EA-5P-2H(51)&series=DF3&documenttype=2DDrawing&lang=en&documentid=0001163317), generated with kicad-footprint-generator +connector Hirose top entry +0 +10 +9 +Connector_Hirose +Hirose_DF3EA-09P-2H_1x09-1MP_P2.00mm_Horizontal +Hirose series connector, DF3EA-09P-2H (https://www.hirose.com/product/document?clcode=CL0543-0332-0-51&productname=DF3EA-5P-2H(51)&series=DF3&documenttype=2DDrawing&lang=en&documentid=0001163317), generated with kicad-footprint-generator +connector Hirose top entry +0 +11 +10 +Connector_Hirose +Hirose_DF3EA-10P-2H_1x10-1MP_P2.00mm_Horizontal +Hirose series connector, DF3EA-10P-2H (https://www.hirose.com/product/document?clcode=CL0543-0332-0-51&productname=DF3EA-5P-2H(51)&series=DF3&documenttype=2DDrawing&lang=en&documentid=0001163317), generated with kicad-footprint-generator +connector Hirose top entry +0 +12 +11 +Connector_Hirose +Hirose_DF3EA-11P-2H_1x11-1MP_P2.00mm_Horizontal +Hirose series connector, DF3EA-11P-2H (https://www.hirose.com/product/document?clcode=CL0543-0332-0-51&productname=DF3EA-5P-2H(51)&series=DF3&documenttype=2DDrawing&lang=en&documentid=0001163317), generated with kicad-footprint-generator +connector Hirose top entry +0 +13 +12 +Connector_Hirose +Hirose_DF3EA-12P-2H_1x12-1MP_P2.00mm_Horizontal +Hirose series connector, DF3EA-12P-2H (https://www.hirose.com/product/document?clcode=CL0543-0332-0-51&productname=DF3EA-5P-2H(51)&series=DF3&documenttype=2DDrawing&lang=en&documentid=0001163317), generated with kicad-footprint-generator +connector Hirose top entry +0 +14 +13 +Connector_Hirose +Hirose_DF3EA-13P-2H_1x13-1MP_P2.00mm_Horizontal +Hirose series connector, DF3EA-13P-2H (https://www.hirose.com/product/document?clcode=CL0543-0332-0-51&productname=DF3EA-5P-2H(51)&series=DF3&documenttype=2DDrawing&lang=en&documentid=0001163317), generated with kicad-footprint-generator +connector Hirose top entry +0 +15 +14 +Connector_Hirose +Hirose_DF3EA-14P-2H_1x14-1MP_P2.00mm_Horizontal +Hirose series connector, DF3EA-14P-2H (https://www.hirose.com/product/document?clcode=CL0543-0332-0-51&productname=DF3EA-5P-2H(51)&series=DF3&documenttype=2DDrawing&lang=en&documentid=0001163317), generated with kicad-footprint-generator +connector Hirose top entry +0 +16 +15 +Connector_Hirose +Hirose_DF3EA-15P-2H_1x15-1MP_P2.00mm_Horizontal +Hirose series connector, DF3EA-15P-2H (https://www.hirose.com/product/document?clcode=CL0543-0332-0-51&productname=DF3EA-5P-2H(51)&series=DF3&documenttype=2DDrawing&lang=en&documentid=0001163317), generated with kicad-footprint-generator +connector Hirose top entry +0 +17 +16 +Connector_Hirose +Hirose_DF11-4DP-2DSA_2x02_P2.00mm_Vertical +Hirose DF11 through hole, DF11-4DP-2DSA, 2 Pins per row (https://www.hirose.com/product/document?clcode=&productname=&series=DF11&documenttype=Catalog&lang=en&documentid=D31688_en), generated with kicad-footprint-generator +connector Hirose DF11 vertical +0 +4 +4 +Connector_Hirose +Hirose_DF11-6DP-2DSA_2x03_P2.00mm_Vertical +Hirose DF11 through hole, DF11-6DP-2DSA, 3 Pins per row (https://www.hirose.com/product/document?clcode=&productname=&series=DF11&documenttype=Catalog&lang=en&documentid=D31688_en), generated with kicad-footprint-generator +connector Hirose DF11 vertical +0 +6 +6 +Connector_Hirose +Hirose_DF11-8DP-2DSA_2x04_P2.00mm_Vertical +Hirose DF11 through hole, DF11-8DP-2DSA, 4 Pins per row (https://www.hirose.com/product/document?clcode=&productname=&series=DF11&documenttype=Catalog&lang=en&documentid=D31688_en), generated with kicad-footprint-generator +connector Hirose DF11 vertical +0 +8 +8 +Connector_Hirose +Hirose_DF11-10DP-2DSA_2x05_P2.00mm_Vertical +Hirose DF11 through hole, DF11-10DP-2DSA, 5 Pins per row (https://www.hirose.com/product/document?clcode=&productname=&series=DF11&documenttype=Catalog&lang=en&documentid=D31688_en), generated with kicad-footprint-generator +connector Hirose DF11 vertical +0 +10 +10 +Connector_Hirose +Hirose_DF11-12DP-2DSA_2x06_P2.00mm_Vertical +Hirose DF11 through hole, DF11-12DP-2DSA, 6 Pins per row (https://www.hirose.com/product/document?clcode=&productname=&series=DF11&documenttype=Catalog&lang=en&documentid=D31688_en), generated with kicad-footprint-generator +connector Hirose DF11 vertical +0 +12 +12 +Connector_Hirose +Hirose_DF11-14DP-2DSA_2x07_P2.00mm_Vertical +Hirose DF11 through hole, DF11-14DP-2DSA, 7 Pins per row (https://www.hirose.com/product/document?clcode=&productname=&series=DF11&documenttype=Catalog&lang=en&documentid=D31688_en), generated with kicad-footprint-generator +connector Hirose DF11 vertical +0 +14 +14 +Connector_Hirose +Hirose_DF11-16DP-2DSA_2x08_P2.00mm_Vertical +Hirose DF11 through hole, DF11-16DP-2DSA, 8 Pins per row (https://www.hirose.com/product/document?clcode=&productname=&series=DF11&documenttype=Catalog&lang=en&documentid=D31688_en), generated with kicad-footprint-generator +connector Hirose DF11 vertical +0 +16 +16 +Connector_Hirose +Hirose_DF11-18DP-2DSA_2x09_P2.00mm_Vertical +Hirose DF11 through hole, DF11-18DP-2DSA, 9 Pins per row (https://www.hirose.com/product/document?clcode=&productname=&series=DF11&documenttype=Catalog&lang=en&documentid=D31688_en), generated with kicad-footprint-generator +connector Hirose DF11 vertical +0 +18 +18 +Connector_Hirose +Hirose_DF11-20DP-2DSA_2x10_P2.00mm_Vertical +Hirose DF11 through hole, DF11-20DP-2DSA, 10 Pins per row (https://www.hirose.com/product/document?clcode=&productname=&series=DF11&documenttype=Catalog&lang=en&documentid=D31688_en), generated with kicad-footprint-generator +connector Hirose DF11 vertical +0 +20 +20 +Connector_Hirose +Hirose_DF11-22DP-2DSA_2x11_P2.00mm_Vertical +Hirose DF11 through hole, DF11-22DP-2DSA, 11 Pins per row (https://www.hirose.com/product/document?clcode=&productname=&series=DF11&documenttype=Catalog&lang=en&documentid=D31688_en), generated with kicad-footprint-generator +connector Hirose DF11 vertical +0 +22 +22 +Connector_Hirose +Hirose_DF11-24DP-2DSA_2x12_P2.00mm_Vertical +Hirose DF11 through hole, DF11-24DP-2DSA, 12 Pins per row (https://www.hirose.com/product/document?clcode=&productname=&series=DF11&documenttype=Catalog&lang=en&documentid=D31688_en), generated with kicad-footprint-generator +connector Hirose DF11 vertical +0 +24 +24 +Connector_Hirose +Hirose_DF11-26DP-2DSA_2x13_P2.00mm_Vertical +Hirose DF11 through hole, DF11-26DP-2DSA, 13 Pins per row (https://www.hirose.com/product/document?clcode=&productname=&series=DF11&documenttype=Catalog&lang=en&documentid=D31688_en), generated with kicad-footprint-generator +connector Hirose DF11 vertical +0 +26 +26 +Connector_Hirose +Hirose_DF11-28DP-2DSA_2x14_P2.00mm_Vertical +Hirose DF11 through hole, DF11-28DP-2DSA, 14 Pins per row (https://www.hirose.com/product/document?clcode=&productname=&series=DF11&documenttype=Catalog&lang=en&documentid=D31688_en), generated with kicad-footprint-generator +connector Hirose DF11 vertical +0 +28 +28 +Connector_Hirose +Hirose_DF11-30DP-2DSA_2x15_P2.00mm_Vertical +Hirose DF11 through hole, DF11-30DP-2DSA, 15 Pins per row (https://www.hirose.com/product/document?clcode=&productname=&series=DF11&documenttype=Catalog&lang=en&documentid=D31688_en), generated with kicad-footprint-generator +connector Hirose DF11 vertical +0 +30 +30 +Connector_Hirose +Hirose_DF11-32DP-2DSA_2x16_P2.00mm_Vertical +Hirose DF11 through hole, DF11-32DP-2DSA, 16 Pins per row (https://www.hirose.com/product/document?clcode=&productname=&series=DF11&documenttype=Catalog&lang=en&documentid=D31688_en), generated with kicad-footprint-generator +connector Hirose DF11 vertical +0 +32 +32 +Connector_Hirose +Hirose_DF12_DF12C3.0-10DS-0.5V_2x05_P0.50mm_Vertical +Hirose DF12C SMD, DF12C3.0-10DS-0.5V, 10 Pins per row (https://www.hirose.com/product/document?clcode=CL0537-0694-9-81&productname=DF12C(3.0)-50DS-0.5V(81)&series=DF12&documenttype=2DDrawing&lang=en&documentid=0000994748), generated with kicad-footprint-generator +connector Hirose DF12 vertical +0 +20 +10 +Connector_Hirose +Hirose_DF12_DF12C3.0-14DS-0.5V_2x07_P0.50mm_Vertical +Hirose DF12C SMD, DF12C3.0-14DS-0.5V, 14 Pins per row (https://www.hirose.com/product/document?clcode=CL0537-0694-9-81&productname=DF12C(3.0)-50DS-0.5V(81)&series=DF12&documenttype=2DDrawing&lang=en&documentid=0000994748), generated with kicad-footprint-generator +connector Hirose DF12 vertical +0 +28 +14 +Connector_Hirose +Hirose_DF12_DF12C3.0-20DS-0.5V_2x10_P0.50mm_Vertical +Hirose DF12C SMD, DF12C3.0-20DS-0.5V, 20 Pins per row (https://www.hirose.com/product/document?clcode=CL0537-0694-9-81&productname=DF12C(3.0)-50DS-0.5V(81)&series=DF12&documenttype=2DDrawing&lang=en&documentid=0000994748), generated with kicad-footprint-generator +connector Hirose DF12 vertical +0 +40 +20 +Connector_Hirose +Hirose_DF12_DF12C3.0-30DS-0.5V_2x15_P0.50mm_Vertical +Hirose DF12C SMD, DF12C3.0-30DS-0.5V, 30 Pins per row (https://www.hirose.com/product/document?clcode=CL0537-0694-9-81&productname=DF12C(3.0)-50DS-0.5V(81)&series=DF12&documenttype=2DDrawing&lang=en&documentid=0000994748), generated with kicad-footprint-generator +connector Hirose DF12 vertical +0 +60 +30 +Connector_Hirose +Hirose_DF12_DF12C3.0-32DS-0.5V_2x16_P0.50mm_Vertical +Hirose DF12C SMD, DF12C3.0-32DS-0.5V, 32 Pins per row (https://www.hirose.com/product/document?clcode=CL0537-0694-9-81&productname=DF12C(3.0)-50DS-0.5V(81)&series=DF12&documenttype=2DDrawing&lang=en&documentid=0000994748), generated with kicad-footprint-generator +connector Hirose DF12 vertical +0 +64 +32 +Connector_Hirose +Hirose_DF12_DF12C3.0-36DS-0.5V_2x18_P0.50mm_Vertical +Hirose DF12C SMD, DF12C3.0-36DS-0.5V, 36 Pins per row (https://www.hirose.com/product/document?clcode=CL0537-0694-9-81&productname=DF12C(3.0)-50DS-0.5V(81)&series=DF12&documenttype=2DDrawing&lang=en&documentid=0000994748), generated with kicad-footprint-generator +connector Hirose DF12 vertical +0 +72 +36 +Connector_Hirose +Hirose_DF12_DF12C3.0-40DS-0.5V_2x20_P0.50mm_Vertical +Hirose DF12C SMD, DF12C3.0-40DS-0.5V, 40 Pins per row (https://www.hirose.com/product/document?clcode=CL0537-0694-9-81&productname=DF12C(3.0)-50DS-0.5V(81)&series=DF12&documenttype=2DDrawing&lang=en&documentid=0000994748), generated with kicad-footprint-generator +connector Hirose DF12 vertical +0 +80 +40 +Connector_Hirose +Hirose_DF12_DF12C3.0-50DS-0.5V_2x25_P0.50mm_Vertical +Hirose DF12C SMD, DF12C3.0-50DS-0.5V, 50 Pins per row (https://www.hirose.com/product/document?clcode=CL0537-0694-9-81&productname=DF12C(3.0)-50DS-0.5V(81)&series=DF12&documenttype=2DDrawing&lang=en&documentid=0000994748), generated with kicad-footprint-generator +connector Hirose DF12 vertical +0 +100 +50 +Connector_Hirose +Hirose_DF12_DF12C3.0-60DS-0.5V_2x30_P0.50mm_Vertical +Hirose DF12C SMD, DF12C3.0-60DS-0.5V, 60 Pins per row (https://www.hirose.com/product/document?clcode=CL0537-0694-9-81&productname=DF12C(3.0)-50DS-0.5V(81)&series=DF12&documenttype=2DDrawing&lang=en&documentid=0000994748), generated with kicad-footprint-generator +connector Hirose DF12 vertical +0 +120 +60 +Connector_Hirose +Hirose_DF12_DF12E3.0-10DP-0.5V_2x05_P0.50mm_Vertical +Hirose DF12E SMD, DF12E3.0-10DP-0.5V, 10 Pins per row (https://www.hirose.com/product/document?clcode=CL0537-0834-6-81&productname=DF12E(3.0)-50DP-0.5V(81)&series=DF12&documenttype=2DDrawing&lang=en&documentid=0000992393), generated with kicad-footprint-generator +connector Hirose DF12 vertical +0 +20 +10 +Connector_Hirose +Hirose_DF12_DF12E3.0-14DP-0.5V_2x07_P0.50mm_Vertical +Hirose DF12E SMD, DF12E3.0-14DP-0.5V, 14 Pins per row (https://www.hirose.com/product/document?clcode=CL0537-0834-6-81&productname=DF12E(3.0)-50DP-0.5V(81)&series=DF12&documenttype=2DDrawing&lang=en&documentid=0000992393), generated with kicad-footprint-generator +connector Hirose DF12 vertical +0 +28 +14 +Connector_Hirose +Hirose_DF12_DF12E3.0-20DP-0.5V_2x10_P0.50mm_Vertical +Hirose DF12E SMD, DF12E3.0-20DP-0.5V, 20 Pins per row (https://www.hirose.com/product/document?clcode=CL0537-0834-6-81&productname=DF12E(3.0)-50DP-0.5V(81)&series=DF12&documenttype=2DDrawing&lang=en&documentid=0000992393), generated with kicad-footprint-generator +connector Hirose DF12 vertical +0 +40 +20 +Connector_Hirose +Hirose_DF12_DF12E3.0-30DP-0.5V_2x15_P0.50mm_Vertical +Hirose DF12E SMD, DF12E3.0-30DP-0.5V, 30 Pins per row (https://www.hirose.com/product/document?clcode=CL0537-0834-6-81&productname=DF12E(3.0)-50DP-0.5V(81)&series=DF12&documenttype=2DDrawing&lang=en&documentid=0000992393), generated with kicad-footprint-generator +connector Hirose DF12 vertical +0 +60 +30 +Connector_Hirose +Hirose_DF12_DF12E3.0-32DP-0.5V_2x16_P0.50mm_Vertical +Hirose DF12E SMD, DF12E3.0-32DP-0.5V, 32 Pins per row (https://www.hirose.com/product/document?clcode=CL0537-0834-6-81&productname=DF12E(3.0)-50DP-0.5V(81)&series=DF12&documenttype=2DDrawing&lang=en&documentid=0000992393), generated with kicad-footprint-generator +connector Hirose DF12 vertical +0 +64 +32 +Connector_Hirose +Hirose_DF12_DF12E3.0-36DP-0.5V_2x18_P0.50mm_Vertical +Hirose DF12E SMD, DF12E3.0-36DP-0.5V, 36 Pins per row (https://www.hirose.com/product/document?clcode=CL0537-0834-6-81&productname=DF12E(3.0)-50DP-0.5V(81)&series=DF12&documenttype=2DDrawing&lang=en&documentid=0000992393), generated with kicad-footprint-generator +connector Hirose DF12 vertical +0 +72 +36 +Connector_Hirose +Hirose_DF12_DF12E3.0-40DP-0.5V_2x20_P0.50mm_Vertical +Hirose DF12E SMD, DF12E3.0-40DP-0.5V, 40 Pins per row (https://www.hirose.com/product/document?clcode=CL0537-0834-6-81&productname=DF12E(3.0)-50DP-0.5V(81)&series=DF12&documenttype=2DDrawing&lang=en&documentid=0000992393), generated with kicad-footprint-generator +connector Hirose DF12 vertical +0 +80 +40 +Connector_Hirose +Hirose_DF12_DF12E3.0-50DP-0.5V_2x25_P0.50mm_Vertical +Hirose DF12E SMD, DF12E3.0-50DP-0.5V, 50 Pins per row (https://www.hirose.com/product/document?clcode=CL0537-0834-6-81&productname=DF12E(3.0)-50DP-0.5V(81)&series=DF12&documenttype=2DDrawing&lang=en&documentid=0000992393), generated with kicad-footprint-generator +connector Hirose DF12 vertical +0 +100 +50 +Connector_Hirose +Hirose_DF12_DF12E3.0-60DP-0.5V_2x30_P0.50mm_Vertical +Hirose DF12E SMD, DF12E3.0-60DP-0.5V, 60 Pins per row (https://www.hirose.com/product/document?clcode=CL0537-0834-6-81&productname=DF12E(3.0)-50DP-0.5V(81)&series=DF12&documenttype=2DDrawing&lang=en&documentid=0000992393), generated with kicad-footprint-generator +connector Hirose DF12 vertical +0 +120 +60 +Connector_Hirose +Hirose_DF12_DF12E3.0-80DP-0.5V_2x40_P0.50mm_Vertical +Hirose DF12E SMD, DF12E3.0-80DP-0.5V, 80 Pins per row (https://www.hirose.com/product/document?clcode=CL0537-0834-6-81&productname=DF12E(3.0)-50DP-0.5V(81)&series=DF12&documenttype=2DDrawing&lang=en&documentid=0000992393), generated with kicad-footprint-generator +connector Hirose DF12 vertical +0 +160 +80 +Connector_Hirose +Hirose_DF13-02P-1.25DSA_1x02_P1.25mm_Vertical +Hirose DF13 through hole, DF13-02P-1.25DSA, 2 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-2P-1.25DSA%2850%29/), generated with kicad-footprint-generator +connector Hirose DF13 vertical +0 +2 +2 +Connector_Hirose +Hirose_DF13-02P-1.25DS_1x02_P1.25mm_Horizontal +Hirose DF13 through hole, DF13-02P-1.25DS, 2 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-4P-1.25DS%2820%29/), generated with kicad-footprint-generator +connector Hirose DF13 horizontal +0 +2 +2 +Connector_Hirose +Hirose_DF13-03P-1.25DSA_1x03_P1.25mm_Vertical +Hirose DF13 through hole, DF13-03P-1.25DSA, 3 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-2P-1.25DSA%2850%29/), generated with kicad-footprint-generator +connector Hirose DF13 vertical +0 +3 +3 +Connector_Hirose +Hirose_DF13-03P-1.25DS_1x03_P1.25mm_Horizontal +Hirose DF13 through hole, DF13-03P-1.25DS, 3 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-4P-1.25DS%2820%29/), generated with kicad-footprint-generator +connector Hirose DF13 horizontal +0 +3 +3 +Connector_Hirose +Hirose_DF13-04P-1.25DSA_1x04_P1.25mm_Vertical +Hirose DF13 through hole, DF13-04P-1.25DSA, 4 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-2P-1.25DSA%2850%29/), generated with kicad-footprint-generator +connector Hirose DF13 vertical +0 +4 +4 +Connector_Hirose +Hirose_DF13-04P-1.25DS_1x04_P1.25mm_Horizontal +Hirose DF13 through hole, DF13-04P-1.25DS, 4 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-4P-1.25DS%2820%29/), generated with kicad-footprint-generator +connector Hirose DF13 horizontal +0 +4 +4 +Connector_Hirose +Hirose_DF13-05P-1.25DSA_1x05_P1.25mm_Vertical +Hirose DF13 through hole, DF13-05P-1.25DSA, 5 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-2P-1.25DSA%2850%29/), generated with kicad-footprint-generator +connector Hirose DF13 vertical +0 +5 +5 +Connector_Hirose +Hirose_DF13-05P-1.25DS_1x05_P1.25mm_Horizontal +Hirose DF13 through hole, DF13-05P-1.25DS, 5 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-4P-1.25DS%2820%29/), generated with kicad-footprint-generator +connector Hirose DF13 horizontal +0 +5 +5 +Connector_Hirose +Hirose_DF13-06P-1.25DSA_1x06_P1.25mm_Vertical +Hirose DF13 through hole, DF13-06P-1.25DSA, 6 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-2P-1.25DSA%2850%29/), generated with kicad-footprint-generator +connector Hirose DF13 vertical +0 +6 +6 +Connector_Hirose +Hirose_DF13-06P-1.25DS_1x06_P1.25mm_Horizontal +Hirose DF13 through hole, DF13-06P-1.25DS, 6 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-4P-1.25DS%2820%29/), generated with kicad-footprint-generator +connector Hirose DF13 horizontal +0 +6 +6 +Connector_Hirose +Hirose_DF13-07P-1.25DSA_1x07_P1.25mm_Vertical +Hirose DF13 through hole, DF13-07P-1.25DSA, 7 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-2P-1.25DSA%2850%29/), generated with kicad-footprint-generator +connector Hirose DF13 vertical +0 +7 +7 +Connector_Hirose +Hirose_DF13-07P-1.25DS_1x07_P1.25mm_Horizontal +Hirose DF13 through hole, DF13-07P-1.25DS, 7 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-4P-1.25DS%2820%29/), generated with kicad-footprint-generator +connector Hirose DF13 horizontal +0 +7 +7 +Connector_Hirose +Hirose_DF13-08P-1.25DSA_1x08_P1.25mm_Vertical +Hirose DF13 through hole, DF13-08P-1.25DSA, 8 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-2P-1.25DSA%2850%29/), generated with kicad-footprint-generator +connector Hirose DF13 vertical +0 +8 +8 +Connector_Hirose +Hirose_DF13-08P-1.25DS_1x08_P1.25mm_Horizontal +Hirose DF13 through hole, DF13-08P-1.25DS, 8 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-4P-1.25DS%2820%29/), generated with kicad-footprint-generator +connector Hirose DF13 horizontal +0 +8 +8 +Connector_Hirose +Hirose_DF13-09P-1.25DSA_1x09_P1.25mm_Vertical +Hirose DF13 through hole, DF13-09P-1.25DSA, 9 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-2P-1.25DSA%2850%29/), generated with kicad-footprint-generator +connector Hirose DF13 vertical +0 +9 +9 +Connector_Hirose +Hirose_DF13-09P-1.25DS_1x09_P1.25mm_Horizontal +Hirose DF13 through hole, DF13-09P-1.25DS, 9 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-4P-1.25DS%2820%29/), generated with kicad-footprint-generator +connector Hirose DF13 horizontal +0 +9 +9 +Connector_Hirose +Hirose_DF13-10P-1.25DSA_1x10_P1.25mm_Vertical +Hirose DF13 through hole, DF13-10P-1.25DSA, 10 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-2P-1.25DSA%2850%29/), generated with kicad-footprint-generator +connector Hirose DF13 vertical +0 +10 +10 +Connector_Hirose +Hirose_DF13-10P-1.25DS_1x10_P1.25mm_Horizontal +Hirose DF13 through hole, DF13-10P-1.25DS, 10 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-4P-1.25DS%2820%29/), generated with kicad-footprint-generator +connector Hirose DF13 horizontal +0 +10 +10 +Connector_Hirose +Hirose_DF13-11P-1.25DSA_1x11_P1.25mm_Vertical +Hirose DF13 through hole, DF13-11P-1.25DSA, 11 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-2P-1.25DSA%2850%29/), generated with kicad-footprint-generator +connector Hirose DF13 vertical +0 +11 +11 +Connector_Hirose +Hirose_DF13-11P-1.25DS_1x11_P1.25mm_Horizontal +Hirose DF13 through hole, DF13-11P-1.25DS, 11 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-4P-1.25DS%2820%29/), generated with kicad-footprint-generator +connector Hirose DF13 horizontal +0 +11 +11 +Connector_Hirose +Hirose_DF13-12P-1.25DSA_1x12_P1.25mm_Vertical +Hirose DF13 through hole, DF13-12P-1.25DSA, 12 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-2P-1.25DSA%2850%29/), generated with kicad-footprint-generator +connector Hirose DF13 vertical +0 +12 +12 +Connector_Hirose +Hirose_DF13-12P-1.25DS_1x12_P1.25mm_Horizontal +Hirose DF13 through hole, DF13-12P-1.25DS, 12 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-4P-1.25DS%2820%29/), generated with kicad-footprint-generator +connector Hirose DF13 horizontal +0 +12 +12 +Connector_Hirose +Hirose_DF13-13P-1.25DSA_1x13_P1.25mm_Vertical +Hirose DF13 through hole, DF13-13P-1.25DSA, 13 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-2P-1.25DSA%2850%29/), generated with kicad-footprint-generator +connector Hirose DF13 vertical +0 +13 +13 +Connector_Hirose +Hirose_DF13-14P-1.25DSA_1x14_P1.25mm_Vertical +Hirose DF13 through hole, DF13-14P-1.25DSA, 14 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-2P-1.25DSA%2850%29/), generated with kicad-footprint-generator +connector Hirose DF13 vertical +0 +14 +14 +Connector_Hirose +Hirose_DF13-14P-1.25DS_1x14_P1.25mm_Horizontal +Hirose DF13 through hole, DF13-14P-1.25DS, 14 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-4P-1.25DS%2820%29/), generated with kicad-footprint-generator +connector Hirose DF13 horizontal +0 +14 +14 +Connector_Hirose +Hirose_DF13-15P-1.25DSA_1x15_P1.25mm_Vertical +Hirose DF13 through hole, DF13-15P-1.25DSA, 15 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-2P-1.25DSA%2850%29/), generated with kicad-footprint-generator +connector Hirose DF13 vertical +0 +15 +15 +Connector_Hirose +Hirose_DF13-15P-1.25DS_1x15_P1.25mm_Horizontal +Hirose DF13 through hole, DF13-15P-1.25DS, 15 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-4P-1.25DS%2820%29/), generated with kicad-footprint-generator +connector Hirose DF13 horizontal +0 +15 +15 +Connector_Hirose +Hirose_DF13C_CL535-0402-2-51_1x02-1MP_P1.25mm_Vertical +Hirose DF13C SMD, CL535-0402-2-51, 2 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13C-10P-1.25V%2851%29/), generated with kicad-footprint-generator +connector Hirose DF13C vertical +0 +4 +3 +Connector_Hirose +Hirose_DF13C_CL535-0403-5-51_1x03-1MP_P1.25mm_Vertical +Hirose DF13C SMD, CL535-0403-5-51, 3 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13C-10P-1.25V%2851%29/), generated with kicad-footprint-generator +connector Hirose DF13C vertical +0 +5 +4 +Connector_Hirose +Hirose_DF13C_CL535-0404-8-51_1x04-1MP_P1.25mm_Vertical +Hirose DF13C SMD, CL535-0404-8-51, 4 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13C-10P-1.25V%2851%29/), generated with kicad-footprint-generator +connector Hirose DF13C vertical +0 +6 +5 +Connector_Hirose +Hirose_DF13C_CL535-0405-0-51_1x05-1MP_P1.25mm_Vertical +Hirose DF13C SMD, CL535-0405-0-51, 5 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13C-10P-1.25V%2851%29/), generated with kicad-footprint-generator +connector Hirose DF13C vertical +0 +7 +6 +Connector_Hirose +Hirose_DF13C_CL535-0406-3-51_1x06-1MP_P1.25mm_Vertical +Hirose DF13C SMD, CL535-0406-3-51, 6 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13C-10P-1.25V%2851%29/), generated with kicad-footprint-generator +connector Hirose DF13C vertical +0 +8 +7 +Connector_Hirose +Hirose_DF13C_CL535-0407-6-51_1x07-1MP_P1.25mm_Vertical +Hirose DF13C SMD, CL535-0407-6-51, 7 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13C-10P-1.25V%2851%29/), generated with kicad-footprint-generator +connector Hirose DF13C vertical +0 +9 +8 +Connector_Hirose +Hirose_DF13C_CL535-0408-9-51_1x08-1MP_P1.25mm_Vertical +Hirose DF13C SMD, CL535-0408-9-51, 8 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13C-10P-1.25V%2851%29/), generated with kicad-footprint-generator +connector Hirose DF13C vertical +0 +10 +9 +Connector_Hirose +Hirose_DF13C_CL535-0409-1-51_1x09-1MP_P1.25mm_Vertical +Hirose DF13C SMD, CL535-0409-1-51, 9 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13C-10P-1.25V%2851%29/), generated with kicad-footprint-generator +connector Hirose DF13C vertical +0 +11 +10 +Connector_Hirose +Hirose_DF13C_CL535-0410-4-51_1x10-1MP_P1.25mm_Vertical +Hirose DF13C SMD, CL535-0410-4-51, 10 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13C-10P-1.25V%2851%29/), generated with kicad-footprint-generator +connector Hirose DF13C vertical +0 +12 +11 +Connector_Hirose +Hirose_DF13C_CL535-0411-3-51_1x11-1MP_P1.25mm_Vertical +Hirose DF13C SMD, CL535-0411-3-51, 11 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13C-10P-1.25V%2851%29/), generated with kicad-footprint-generator +connector Hirose DF13C vertical +0 +13 +12 +Connector_Hirose +Hirose_DF13C_CL535-0412-6-51_1x12-1MP_P1.25mm_Vertical +Hirose DF13C SMD, CL535-0412-6-51, 12 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13C-10P-1.25V%2851%29/), generated with kicad-footprint-generator +connector Hirose DF13C vertical +0 +14 +13 +Connector_Hirose +Hirose_DF13C_CL535-0414-1-51_1x14-1MP_P1.25mm_Vertical +Hirose DF13C SMD, CL535-0414-1-51, 14 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13C-10P-1.25V%2851%29/), generated with kicad-footprint-generator +connector Hirose DF13C vertical +0 +16 +15 +Connector_Hirose +Hirose_DF13C_CL535-0415-4-51_1x15-1MP_P1.25mm_Vertical +Hirose DF13C SMD, CL535-0415-4-51, 15 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13C-10P-1.25V%2851%29/), generated with kicad-footprint-generator +connector Hirose DF13C vertical +0 +17 +16 +Connector_Hirose +Hirose_DF52-2S-0.8H_1x02-1MP_P0.80mm_Horizontal +Hirose series connector, DF52-2S-0.8H (https://www.hirose.com/product/en/products/DF52/DF52-3S-0.8H%2821%29/), generated with kicad-footprint-generator +connector Hirose top entry +0 +4 +3 +Connector_Hirose +Hirose_DF52-3S-0.8H_1x03-1MP_P0.80mm_Horizontal +Hirose series connector, DF52-3S-0.8H (https://www.hirose.com/product/en/products/DF52/DF52-3S-0.8H%2821%29/), generated with kicad-footprint-generator +connector Hirose top entry +0 +5 +4 +Connector_Hirose +Hirose_DF52-4S-0.8H_1x04-1MP_P0.80mm_Horizontal +Hirose series connector, DF52-4S-0.8H (https://www.hirose.com/product/en/products/DF52/DF52-3S-0.8H%2821%29/), generated with kicad-footprint-generator +connector Hirose top entry +0 +6 +5 +Connector_Hirose +Hirose_DF52-5S-0.8H_1x05-1MP_P0.80mm_Horizontal +Hirose series connector, DF52-5S-0.8H (https://www.hirose.com/product/en/products/DF52/DF52-3S-0.8H%2821%29/), generated with kicad-footprint-generator +connector Hirose top entry +0 +7 +6 +Connector_Hirose +Hirose_DF52-6S-0.8H_1x06-1MP_P0.80mm_Horizontal +Hirose series connector, DF52-6S-0.8H (https://www.hirose.com/product/en/products/DF52/DF52-3S-0.8H%2821%29/), generated with kicad-footprint-generator +connector Hirose top entry +0 +8 +7 +Connector_Hirose +Hirose_DF52-7S-0.8H_1x07-1MP_P0.80mm_Horizontal +Hirose series connector, DF52-7S-0.8H (https://www.hirose.com/product/en/products/DF52/DF52-3S-0.8H%2821%29/), generated with kicad-footprint-generator +connector Hirose top entry +0 +9 +8 +Connector_Hirose +Hirose_DF52-8S-0.8H_1x08-1MP_P0.80mm_Horizontal +Hirose series connector, DF52-8S-0.8H (https://www.hirose.com/product/en/products/DF52/DF52-3S-0.8H%2821%29/), generated with kicad-footprint-generator +connector Hirose top entry +0 +10 +9 +Connector_Hirose +Hirose_DF52-9S-0.8H_1x09-1MP_P0.80mm_Horizontal +Hirose series connector, DF52-9S-0.8H (https://www.hirose.com/product/en/products/DF52/DF52-3S-0.8H%2821%29/), generated with kicad-footprint-generator +connector Hirose top entry +0 +11 +10 +Connector_Hirose +Hirose_DF52-10S-0.8H_1x10-1MP_P0.80mm_Horizontal +Hirose series connector, DF52-10S-0.8H (https://www.hirose.com/product/en/products/DF52/DF52-3S-0.8H%2821%29/), generated with kicad-footprint-generator +connector Hirose top entry +0 +12 +11 +Connector_Hirose +Hirose_DF52-11S-0.8H_1x11-1MP_P0.80mm_Horizontal +Hirose series connector, DF52-11S-0.8H (https://www.hirose.com/product/en/products/DF52/DF52-3S-0.8H%2821%29/), generated with kicad-footprint-generator +connector Hirose top entry +0 +13 +12 +Connector_Hirose +Hirose_DF52-12S-0.8H_1x12-1MP_P0.80mm_Horizontal +Hirose series connector, DF52-12S-0.8H (https://www.hirose.com/product/en/products/DF52/DF52-3S-0.8H%2821%29/), generated with kicad-footprint-generator +connector Hirose top entry +0 +14 +13 +Connector_Hirose +Hirose_DF52-14S-0.8H_1x14-1MP_P0.80mm_Horizontal +Hirose series connector, DF52-14S-0.8H (https://www.hirose.com/product/en/products/DF52/DF52-3S-0.8H%2821%29/), generated with kicad-footprint-generator +connector Hirose top entry +0 +16 +15 +Connector_Hirose +Hirose_DF52-15S-0.8H_1x15-1MP_P0.80mm_Horizontal +Hirose series connector, DF52-15S-0.8H (https://www.hirose.com/product/en/products/DF52/DF52-3S-0.8H%2821%29/), generated with kicad-footprint-generator +connector Hirose top entry +0 +17 +16 +Connector_Hirose +Hirose_DF63-5P-3.96DSA_1x05_P3.96mm_Vertical +Hirose DF63 through hole, DF63-5P-3.96DSA, 5 Pins per row (https://www.hirose.com/product/en/products/DF63/), generated with kicad-footprint-generator +connector Hirose DF63 vertical +0 +5 +5 +Connector_Hirose +Hirose_DF63-6P-3.96DSA_1x06_P3.96mm_Vertical +Hirose DF63 through hole, DF63-6P-3.96DSA, 6 Pins per row (https://www.hirose.com/product/en/products/DF63/), generated with kicad-footprint-generator +connector Hirose DF63 vertical +0 +6 +6 +Connector_Hirose +Hirose_DF63M-1P-3.96DSA_1x01_P3.96mm_Vertical +Hirose DF63 through hole, DF63M-1P-3.96DSA, 1 Pins per row (https://www.hirose.com/product/en/products/DF63/), generated with kicad-footprint-generator +connector Hirose DF63 vertical +0 +1 +1 +Connector_Hirose +Hirose_DF63M-2P-3.96DSA_1x02_P3.96mm_Vertical +Hirose DF63 through hole, DF63M-2P-3.96DSA, 2 Pins per row (https://www.hirose.com/product/en/products/DF63/), generated with kicad-footprint-generator +connector Hirose DF63 vertical +0 +2 +2 +Connector_Hirose +Hirose_DF63M-3P-3.96DSA_1x03_P3.96mm_Vertical +Hirose DF63 through hole, DF63M-3P-3.96DSA, 3 Pins per row (https://www.hirose.com/product/en/products/DF63/), generated with kicad-footprint-generator +connector Hirose DF63 vertical +0 +3 +3 +Connector_Hirose +Hirose_DF63M-4P-3.96DSA_1x04_P3.96mm_Vertical +Hirose DF63 through hole, DF63M-4P-3.96DSA, 4 Pins per row (https://www.hirose.com/product/en/products/DF63/), generated with kicad-footprint-generator +connector Hirose DF63 vertical +0 +4 +4 +Connector_Hirose +Hirose_DF63R-1P-3.96DSA_1x01_P3.96mm_Vertical +Hirose DF63 through hole, DF63R-1P-3.96DSA, 1 Pins per row (https://www.hirose.com/product/en/products/DF63/), generated with kicad-footprint-generator +connector Hirose DF63 vertical +0 +1 +1 +Connector_Hirose +Hirose_DF63R-2P-3.96DSA_1x02_P3.96mm_Vertical +Hirose DF63 through hole, DF63R-2P-3.96DSA, 2 Pins per row (https://www.hirose.com/product/en/products/DF63/), generated with kicad-footprint-generator +connector Hirose DF63 vertical +0 +2 +2 +Connector_Hirose +Hirose_DF63R-3P-3.96DSA_1x03_P3.96mm_Vertical +Hirose DF63 through hole, DF63R-3P-3.96DSA, 3 Pins per row (https://www.hirose.com/product/en/products/DF63/), generated with kicad-footprint-generator +connector Hirose DF63 vertical +0 +3 +3 +Connector_Hirose +Hirose_DF63R-4P-3.96DSA_1x04_P3.96mm_Vertical +Hirose DF63 through hole, DF63R-4P-3.96DSA, 4 Pins per row (https://www.hirose.com/product/en/products/DF63/), generated with kicad-footprint-generator +connector Hirose DF63 vertical +0 +4 +4 +Connector_Hirose +Hirose_DF63R-5P-3.96DSA_1x05_P3.96mm_Vertical +Hirose DF63 through hole, DF63R-5P-3.96DSA, 5 Pins per row (https://www.hirose.com/product/en/products/DF63/), generated with kicad-footprint-generator +connector Hirose DF63 vertical +0 +5 +5 +Connector_IDC +IDC-Header_2x03_P2.54mm_Horizontal +Through hole IDC box header, 2x03, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole horizontal IDC box header THT 2x03 2.54mm double row +0 +6 +6 +Connector_IDC +IDC-Header_2x03_P2.54mm_Vertical +Through hole IDC box header, 2x03, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC box header THT 2x03 2.54mm double row +0 +6 +6 +Connector_IDC +IDC-Header_2x03_P2.54mm_Vertical_SMD +SMD IDC box header, 2x03, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://www.tme.eu/Document/4baa0e952ce73e37bc68cf730b541507/T821M114A1S100CEU-B.pdf +SMD vertical IDC box header 2x03 2.54mm double row +0 +6 +6 +Connector_IDC +IDC-Header_2x04_P2.54mm_Horizontal +Through hole IDC box header, 2x04, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole horizontal IDC box header THT 2x04 2.54mm double row +0 +8 +8 +Connector_IDC +IDC-Header_2x04_P2.54mm_Vertical +Through hole IDC box header, 2x04, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC box header THT 2x04 2.54mm double row +0 +8 +8 +Connector_IDC +IDC-Header_2x04_P2.54mm_Vertical_SMD +SMD IDC box header, 2x04, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://www.tme.eu/Document/4baa0e952ce73e37bc68cf730b541507/T821M114A1S100CEU-B.pdf +SMD vertical IDC box header 2x04 2.54mm double row +0 +8 +8 +Connector_IDC +IDC-Header_2x05-1MP_P2.54mm_Latch6.5mm_Vertical +Through hole IDC header, 2x05, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x05 2.54mm double row +0 +12 +11 +Connector_IDC +IDC-Header_2x05-1MP_P2.54mm_Latch9.5mm_Vertical +Through hole IDC header, 2x05, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x05 2.54mm double row +0 +12 +11 +Connector_IDC +IDC-Header_2x05-1MP_P2.54mm_Latch12.0mm_Vertical +Through hole IDC header, 2x05, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x05 2.54mm double row +0 +12 +11 +Connector_IDC +IDC-Header_2x05-1MP_P2.54mm_Latch_Horizontal +Through hole IDC header, 2x05, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole horizontal IDC header THT 2x05 2.54mm double row +0 +12 +11 +Connector_IDC +IDC-Header_2x05-1MP_P2.54mm_Latch_Vertical +Through hole IDC header, 2x05, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x05 2.54mm double row +0 +12 +11 +Connector_IDC +IDC-Header_2x05_P2.54mm_Horizontal +Through hole IDC box header, 2x05, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole horizontal IDC box header THT 2x05 2.54mm double row +0 +10 +10 +Connector_IDC +IDC-Header_2x05_P2.54mm_Latch6.5mm_Vertical +Through hole IDC header, 2x05, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x05 2.54mm double row +0 +10 +10 +Connector_IDC +IDC-Header_2x05_P2.54mm_Latch9.5mm_Vertical +Through hole IDC header, 2x05, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x05 2.54mm double row +0 +10 +10 +Connector_IDC +IDC-Header_2x05_P2.54mm_Latch12.0mm_Vertical +Through hole IDC header, 2x05, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x05 2.54mm double row +0 +10 +10 +Connector_IDC +IDC-Header_2x05_P2.54mm_Latch_Horizontal +Through hole IDC header, 2x05, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole horizontal IDC header THT 2x05 2.54mm double row +0 +10 +10 +Connector_IDC +IDC-Header_2x05_P2.54mm_Latch_Vertical +Through hole IDC header, 2x05, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x05 2.54mm double row +0 +10 +10 +Connector_IDC +IDC-Header_2x05_P2.54mm_Vertical +Through hole IDC box header, 2x05, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC box header THT 2x05 2.54mm double row +0 +10 +10 +Connector_IDC +IDC-Header_2x05_P2.54mm_Vertical_SMD +SMD IDC box header, 2x05, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://www.tme.eu/Document/4baa0e952ce73e37bc68cf730b541507/T821M114A1S100CEU-B.pdf +SMD vertical IDC box header 2x05 2.54mm double row +0 +10 +10 +Connector_IDC +IDC-Header_2x06-1MP_P2.54mm_Latch6.5mm_Vertical +Through hole IDC header, 2x06, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x06 2.54mm double row +0 +14 +13 +Connector_IDC +IDC-Header_2x06-1MP_P2.54mm_Latch9.5mm_Vertical +Through hole IDC header, 2x06, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x06 2.54mm double row +0 +14 +13 +Connector_IDC +IDC-Header_2x06-1MP_P2.54mm_Latch12.0mm_Vertical +Through hole IDC header, 2x06, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x06 2.54mm double row +0 +14 +13 +Connector_IDC +IDC-Header_2x06-1MP_P2.54mm_Latch_Horizontal +Through hole IDC header, 2x06, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole horizontal IDC header THT 2x06 2.54mm double row +0 +14 +13 +Connector_IDC +IDC-Header_2x06-1MP_P2.54mm_Latch_Vertical +Through hole IDC header, 2x06, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x06 2.54mm double row +0 +14 +13 +Connector_IDC +IDC-Header_2x06_P2.54mm_Horizontal +Through hole IDC box header, 2x06, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole horizontal IDC box header THT 2x06 2.54mm double row +0 +12 +12 +Connector_IDC +IDC-Header_2x06_P2.54mm_Latch6.5mm_Vertical +Through hole IDC header, 2x06, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x06 2.54mm double row +0 +12 +12 +Connector_IDC +IDC-Header_2x06_P2.54mm_Latch9.5mm_Vertical +Through hole IDC header, 2x06, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x06 2.54mm double row +0 +12 +12 +Connector_IDC +IDC-Header_2x06_P2.54mm_Latch12.0mm_Vertical +Through hole IDC header, 2x06, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x06 2.54mm double row +0 +12 +12 +Connector_IDC +IDC-Header_2x06_P2.54mm_Latch_Horizontal +Through hole IDC header, 2x06, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole horizontal IDC header THT 2x06 2.54mm double row +0 +12 +12 +Connector_IDC +IDC-Header_2x06_P2.54mm_Latch_Vertical +Through hole IDC header, 2x06, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x06 2.54mm double row +0 +12 +12 +Connector_IDC +IDC-Header_2x06_P2.54mm_Vertical +Through hole IDC box header, 2x06, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC box header THT 2x06 2.54mm double row +0 +12 +12 +Connector_IDC +IDC-Header_2x06_P2.54mm_Vertical_SMD +SMD IDC box header, 2x06, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://www.tme.eu/Document/4baa0e952ce73e37bc68cf730b541507/T821M114A1S100CEU-B.pdf +SMD vertical IDC box header 2x06 2.54mm double row +0 +12 +12 +Connector_IDC +IDC-Header_2x07-1MP_P2.54mm_Latch6.5mm_Vertical +Through hole IDC header, 2x07, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x07 2.54mm double row +0 +16 +15 +Connector_IDC +IDC-Header_2x07-1MP_P2.54mm_Latch9.5mm_Vertical +Through hole IDC header, 2x07, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x07 2.54mm double row +0 +16 +15 +Connector_IDC +IDC-Header_2x07-1MP_P2.54mm_Latch12.0mm_Vertical +Through hole IDC header, 2x07, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x07 2.54mm double row +0 +16 +15 +Connector_IDC +IDC-Header_2x07-1MP_P2.54mm_Latch_Horizontal +Through hole IDC header, 2x07, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole horizontal IDC header THT 2x07 2.54mm double row +0 +16 +15 +Connector_IDC +IDC-Header_2x07-1MP_P2.54mm_Latch_Vertical +Through hole IDC header, 2x07, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x07 2.54mm double row +0 +16 +15 +Connector_IDC +IDC-Header_2x07_P2.54mm_Horizontal +Through hole IDC box header, 2x07, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole horizontal IDC box header THT 2x07 2.54mm double row +0 +14 +14 +Connector_IDC +IDC-Header_2x07_P2.54mm_Horizontal_Lock +Connector IDC Locked, 10 contacts, compatible header: PANCON HE10 (Series 50, (https://www.reboul.fr/storage/00003af6.pdf) +connector idc locked +0 +16 +14 +Connector_IDC +IDC-Header_2x07_P2.54mm_Latch6.5mm_Vertical +Through hole IDC header, 2x07, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x07 2.54mm double row +0 +14 +14 +Connector_IDC +IDC-Header_2x07_P2.54mm_Latch9.5mm_Vertical +Through hole IDC header, 2x07, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x07 2.54mm double row +0 +14 +14 +Connector_IDC +IDC-Header_2x07_P2.54mm_Latch12.0mm_Vertical +Through hole IDC header, 2x07, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x07 2.54mm double row +0 +14 +14 +Connector_IDC +IDC-Header_2x07_P2.54mm_Latch_Horizontal +Through hole IDC header, 2x07, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole horizontal IDC header THT 2x07 2.54mm double row +0 +14 +14 +Connector_IDC +IDC-Header_2x07_P2.54mm_Latch_Vertical +Through hole IDC header, 2x07, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x07 2.54mm double row +0 +14 +14 +Connector_IDC +IDC-Header_2x07_P2.54mm_Vertical +Through hole IDC box header, 2x07, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC box header THT 2x07 2.54mm double row +0 +14 +14 +Connector_IDC +IDC-Header_2x07_P2.54mm_Vertical_SMD +SMD IDC box header, 2x07, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://www.tme.eu/Document/4baa0e952ce73e37bc68cf730b541507/T821M114A1S100CEU-B.pdf +SMD vertical IDC box header 2x07 2.54mm double row +0 +14 +14 +Connector_IDC +IDC-Header_2x08-1MP_P2.54mm_Latch6.5mm_Vertical +Through hole IDC header, 2x08, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x08 2.54mm double row +0 +18 +17 +Connector_IDC +IDC-Header_2x08-1MP_P2.54mm_Latch9.5mm_Vertical +Through hole IDC header, 2x08, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x08 2.54mm double row +0 +18 +17 +Connector_IDC +IDC-Header_2x08-1MP_P2.54mm_Latch12.0mm_Vertical +Through hole IDC header, 2x08, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x08 2.54mm double row +0 +18 +17 +Connector_IDC +IDC-Header_2x08-1MP_P2.54mm_Latch_Horizontal +Through hole IDC header, 2x08, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole horizontal IDC header THT 2x08 2.54mm double row +0 +18 +17 +Connector_IDC +IDC-Header_2x08-1MP_P2.54mm_Latch_Vertical +Through hole IDC header, 2x08, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x08 2.54mm double row +0 +18 +17 +Connector_IDC +IDC-Header_2x08_P2.54mm_Horizontal +Through hole IDC box header, 2x08, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole horizontal IDC box header THT 2x08 2.54mm double row +0 +16 +16 +Connector_IDC +IDC-Header_2x08_P2.54mm_Latch6.5mm_Vertical +Through hole IDC header, 2x08, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x08 2.54mm double row +0 +16 +16 +Connector_IDC +IDC-Header_2x08_P2.54mm_Latch9.5mm_Vertical +Through hole IDC header, 2x08, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x08 2.54mm double row +0 +16 +16 +Connector_IDC +IDC-Header_2x08_P2.54mm_Latch12.0mm_Vertical +Through hole IDC header, 2x08, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x08 2.54mm double row +0 +16 +16 +Connector_IDC +IDC-Header_2x08_P2.54mm_Latch_Horizontal +Through hole IDC header, 2x08, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole horizontal IDC header THT 2x08 2.54mm double row +0 +16 +16 +Connector_IDC +IDC-Header_2x08_P2.54mm_Latch_Vertical +Through hole IDC header, 2x08, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x08 2.54mm double row +0 +16 +16 +Connector_IDC +IDC-Header_2x08_P2.54mm_Vertical +Through hole IDC box header, 2x08, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC box header THT 2x08 2.54mm double row +0 +16 +16 +Connector_IDC +IDC-Header_2x08_P2.54mm_Vertical_SMD +SMD IDC box header, 2x08, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://www.tme.eu/Document/4baa0e952ce73e37bc68cf730b541507/T821M114A1S100CEU-B.pdf +SMD vertical IDC box header 2x08 2.54mm double row +0 +16 +16 +Connector_IDC +IDC-Header_2x10-1MP_P2.54mm_Latch6.5mm_Vertical +Through hole IDC header, 2x10, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x10 2.54mm double row +0 +22 +21 +Connector_IDC +IDC-Header_2x10-1MP_P2.54mm_Latch9.5mm_Vertical +Through hole IDC header, 2x10, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x10 2.54mm double row +0 +22 +21 +Connector_IDC +IDC-Header_2x10-1MP_P2.54mm_Latch12.0mm_Vertical +Through hole IDC header, 2x10, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x10 2.54mm double row +0 +22 +21 +Connector_IDC +IDC-Header_2x10-1MP_P2.54mm_Latch_Horizontal +Through hole IDC header, 2x10, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole horizontal IDC header THT 2x10 2.54mm double row +0 +22 +21 +Connector_IDC +IDC-Header_2x10-1MP_P2.54mm_Latch_Vertical +Through hole IDC header, 2x10, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x10 2.54mm double row +0 +22 +21 +Connector_IDC +IDC-Header_2x10_P2.54mm_Horizontal +Through hole IDC box header, 2x10, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole horizontal IDC box header THT 2x10 2.54mm double row +0 +20 +20 +Connector_IDC +IDC-Header_2x10_P2.54mm_Latch6.5mm_Vertical +Through hole IDC header, 2x10, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x10 2.54mm double row +0 +20 +20 +Connector_IDC +IDC-Header_2x10_P2.54mm_Latch9.5mm_Vertical +Through hole IDC header, 2x10, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x10 2.54mm double row +0 +20 +20 +Connector_IDC +IDC-Header_2x10_P2.54mm_Latch12.0mm_Vertical +Through hole IDC header, 2x10, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x10 2.54mm double row +0 +20 +20 +Connector_IDC +IDC-Header_2x10_P2.54mm_Latch_Horizontal +Through hole IDC header, 2x10, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole horizontal IDC header THT 2x10 2.54mm double row +0 +20 +20 +Connector_IDC +IDC-Header_2x10_P2.54mm_Latch_Vertical +Through hole IDC header, 2x10, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x10 2.54mm double row +0 +20 +20 +Connector_IDC +IDC-Header_2x10_P2.54mm_Vertical +Through hole IDC box header, 2x10, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC box header THT 2x10 2.54mm double row +0 +20 +20 +Connector_IDC +IDC-Header_2x10_P2.54mm_Vertical_SMD +SMD IDC box header, 2x10, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://www.tme.eu/Document/4baa0e952ce73e37bc68cf730b541507/T821M114A1S100CEU-B.pdf +SMD vertical IDC box header 2x10 2.54mm double row +0 +20 +20 +Connector_IDC +IDC-Header_2x12-1MP_P2.54mm_Latch6.5mm_Vertical +Through hole IDC header, 2x12, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x12 2.54mm double row +0 +26 +25 +Connector_IDC +IDC-Header_2x12-1MP_P2.54mm_Latch9.5mm_Vertical +Through hole IDC header, 2x12, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x12 2.54mm double row +0 +26 +25 +Connector_IDC +IDC-Header_2x12-1MP_P2.54mm_Latch12.0mm_Vertical +Through hole IDC header, 2x12, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x12 2.54mm double row +0 +26 +25 +Connector_IDC +IDC-Header_2x12-1MP_P2.54mm_Latch_Horizontal +Through hole IDC header, 2x12, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole horizontal IDC header THT 2x12 2.54mm double row +0 +26 +25 +Connector_IDC +IDC-Header_2x12-1MP_P2.54mm_Latch_Vertical +Through hole IDC header, 2x12, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x12 2.54mm double row +0 +26 +25 +Connector_IDC +IDC-Header_2x12_P2.54mm_Horizontal +Through hole IDC box header, 2x12, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole horizontal IDC box header THT 2x12 2.54mm double row +0 +24 +24 +Connector_IDC +IDC-Header_2x12_P2.54mm_Latch6.5mm_Vertical +Through hole IDC header, 2x12, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x12 2.54mm double row +0 +24 +24 +Connector_IDC +IDC-Header_2x12_P2.54mm_Latch9.5mm_Vertical +Through hole IDC header, 2x12, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x12 2.54mm double row +0 +24 +24 +Connector_IDC +IDC-Header_2x12_P2.54mm_Latch12.0mm_Vertical +Through hole IDC header, 2x12, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x12 2.54mm double row +0 +24 +24 +Connector_IDC +IDC-Header_2x12_P2.54mm_Latch_Horizontal +Through hole IDC header, 2x12, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole horizontal IDC header THT 2x12 2.54mm double row +0 +24 +24 +Connector_IDC +IDC-Header_2x12_P2.54mm_Latch_Vertical +Through hole IDC header, 2x12, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x12 2.54mm double row +0 +24 +24 +Connector_IDC +IDC-Header_2x12_P2.54mm_Vertical +Through hole IDC box header, 2x12, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC box header THT 2x12 2.54mm double row +0 +24 +24 +Connector_IDC +IDC-Header_2x12_P2.54mm_Vertical_SMD +SMD IDC box header, 2x12, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://www.tme.eu/Document/4baa0e952ce73e37bc68cf730b541507/T821M114A1S100CEU-B.pdf +SMD vertical IDC box header 2x12 2.54mm double row +0 +24 +24 +Connector_IDC +IDC-Header_2x13-1MP_P2.54mm_Latch6.5mm_Vertical +Through hole IDC header, 2x13, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x13 2.54mm double row +0 +28 +27 +Connector_IDC +IDC-Header_2x13-1MP_P2.54mm_Latch9.5mm_Vertical +Through hole IDC header, 2x13, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x13 2.54mm double row +0 +28 +27 +Connector_IDC +IDC-Header_2x13-1MP_P2.54mm_Latch12.0mm_Vertical +Through hole IDC header, 2x13, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x13 2.54mm double row +0 +28 +27 +Connector_IDC +IDC-Header_2x13-1MP_P2.54mm_Latch_Horizontal +Through hole IDC header, 2x13, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole horizontal IDC header THT 2x13 2.54mm double row +0 +28 +27 +Connector_IDC +IDC-Header_2x13-1MP_P2.54mm_Latch_Vertical +Through hole IDC header, 2x13, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x13 2.54mm double row +0 +28 +27 +Connector_IDC +IDC-Header_2x13_P2.54mm_Horizontal +Through hole IDC box header, 2x13, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole horizontal IDC box header THT 2x13 2.54mm double row +0 +26 +26 +Connector_IDC +IDC-Header_2x13_P2.54mm_Latch6.5mm_Vertical +Through hole IDC header, 2x13, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x13 2.54mm double row +0 +26 +26 +Connector_IDC +IDC-Header_2x13_P2.54mm_Latch9.5mm_Vertical +Through hole IDC header, 2x13, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x13 2.54mm double row +0 +26 +26 +Connector_IDC +IDC-Header_2x13_P2.54mm_Latch12.0mm_Vertical +Through hole IDC header, 2x13, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x13 2.54mm double row +0 +26 +26 +Connector_IDC +IDC-Header_2x13_P2.54mm_Latch_Horizontal +Through hole IDC header, 2x13, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole horizontal IDC header THT 2x13 2.54mm double row +0 +26 +26 +Connector_IDC +IDC-Header_2x13_P2.54mm_Latch_Vertical +Through hole IDC header, 2x13, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x13 2.54mm double row +0 +26 +26 +Connector_IDC +IDC-Header_2x13_P2.54mm_Vertical +Through hole IDC box header, 2x13, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC box header THT 2x13 2.54mm double row +0 +26 +26 +Connector_IDC +IDC-Header_2x13_P2.54mm_Vertical_SMD +SMD IDC box header, 2x13, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://www.tme.eu/Document/4baa0e952ce73e37bc68cf730b541507/T821M114A1S100CEU-B.pdf +SMD vertical IDC box header 2x13 2.54mm double row +0 +26 +26 +Connector_IDC +IDC-Header_2x15-1MP_P2.54mm_Latch6.5mm_Vertical +Through hole IDC header, 2x15, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x15 2.54mm double row +0 +32 +31 +Connector_IDC +IDC-Header_2x15-1MP_P2.54mm_Latch9.5mm_Vertical +Through hole IDC header, 2x15, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x15 2.54mm double row +0 +32 +31 +Connector_IDC +IDC-Header_2x15-1MP_P2.54mm_Latch12.0mm_Vertical +Through hole IDC header, 2x15, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x15 2.54mm double row +0 +32 +31 +Connector_IDC +IDC-Header_2x15-1MP_P2.54mm_Latch_Horizontal +Through hole IDC header, 2x15, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole horizontal IDC header THT 2x15 2.54mm double row +0 +32 +31 +Connector_IDC +IDC-Header_2x15-1MP_P2.54mm_Latch_Vertical +Through hole IDC header, 2x15, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x15 2.54mm double row +0 +32 +31 +Connector_IDC +IDC-Header_2x15_P2.54mm_Horizontal +Through hole IDC box header, 2x15, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole horizontal IDC box header THT 2x15 2.54mm double row +0 +30 +30 +Connector_IDC +IDC-Header_2x15_P2.54mm_Latch6.5mm_Vertical +Through hole IDC header, 2x15, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x15 2.54mm double row +0 +30 +30 +Connector_IDC +IDC-Header_2x15_P2.54mm_Latch9.5mm_Vertical +Through hole IDC header, 2x15, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x15 2.54mm double row +0 +30 +30 +Connector_IDC +IDC-Header_2x15_P2.54mm_Latch12.0mm_Vertical +Through hole IDC header, 2x15, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x15 2.54mm double row +0 +30 +30 +Connector_IDC +IDC-Header_2x15_P2.54mm_Latch_Horizontal +Through hole IDC header, 2x15, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole horizontal IDC header THT 2x15 2.54mm double row +0 +30 +30 +Connector_IDC +IDC-Header_2x15_P2.54mm_Latch_Vertical +Through hole IDC header, 2x15, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x15 2.54mm double row +0 +30 +30 +Connector_IDC +IDC-Header_2x15_P2.54mm_Vertical +Through hole IDC box header, 2x15, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC box header THT 2x15 2.54mm double row +0 +30 +30 +Connector_IDC +IDC-Header_2x17-1MP_P2.54mm_Latch6.5mm_Vertical +Through hole IDC header, 2x17, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x17 2.54mm double row +0 +36 +35 +Connector_IDC +IDC-Header_2x17-1MP_P2.54mm_Latch9.5mm_Vertical +Through hole IDC header, 2x17, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x17 2.54mm double row +0 +36 +35 +Connector_IDC +IDC-Header_2x17-1MP_P2.54mm_Latch12.0mm_Vertical +Through hole IDC header, 2x17, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x17 2.54mm double row +0 +36 +35 +Connector_IDC +IDC-Header_2x17-1MP_P2.54mm_Latch_Horizontal +Through hole IDC header, 2x17, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole horizontal IDC header THT 2x17 2.54mm double row +0 +36 +35 +Connector_IDC +IDC-Header_2x17-1MP_P2.54mm_Latch_Vertical +Through hole IDC header, 2x17, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x17 2.54mm double row +0 +36 +35 +Connector_IDC +IDC-Header_2x17_P2.54mm_Horizontal +Through hole IDC box header, 2x17, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole horizontal IDC box header THT 2x17 2.54mm double row +0 +34 +34 +Connector_IDC +IDC-Header_2x17_P2.54mm_Latch6.5mm_Vertical +Through hole IDC header, 2x17, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x17 2.54mm double row +0 +34 +34 +Connector_IDC +IDC-Header_2x17_P2.54mm_Latch9.5mm_Vertical +Through hole IDC header, 2x17, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x17 2.54mm double row +0 +34 +34 +Connector_IDC +IDC-Header_2x17_P2.54mm_Latch12.0mm_Vertical +Through hole IDC header, 2x17, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x17 2.54mm double row +0 +34 +34 +Connector_IDC +IDC-Header_2x17_P2.54mm_Latch_Horizontal +Through hole IDC header, 2x17, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole horizontal IDC header THT 2x17 2.54mm double row +0 +34 +34 +Connector_IDC +IDC-Header_2x17_P2.54mm_Latch_Vertical +Through hole IDC header, 2x17, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x17 2.54mm double row +0 +34 +34 +Connector_IDC +IDC-Header_2x17_P2.54mm_Vertical +Through hole IDC box header, 2x17, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC box header THT 2x17 2.54mm double row +0 +34 +34 +Connector_IDC +IDC-Header_2x20-1MP_P2.54mm_Latch6.5mm_Vertical +Through hole IDC header, 2x20, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x20 2.54mm double row +0 +42 +41 +Connector_IDC +IDC-Header_2x20-1MP_P2.54mm_Latch9.5mm_Vertical +Through hole IDC header, 2x20, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x20 2.54mm double row +0 +42 +41 +Connector_IDC +IDC-Header_2x20-1MP_P2.54mm_Latch12.0mm_Vertical +Through hole IDC header, 2x20, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x20 2.54mm double row +0 +42 +41 +Connector_IDC +IDC-Header_2x20-1MP_P2.54mm_Latch_Horizontal +Through hole IDC header, 2x20, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole horizontal IDC header THT 2x20 2.54mm double row +0 +42 +41 +Connector_IDC +IDC-Header_2x20-1MP_P2.54mm_Latch_Vertical +Through hole IDC header, 2x20, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x20 2.54mm double row +0 +42 +41 +Connector_IDC +IDC-Header_2x20_P2.54mm_Horizontal +Through hole IDC box header, 2x20, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole horizontal IDC box header THT 2x20 2.54mm double row +0 +40 +40 +Connector_IDC +IDC-Header_2x20_P2.54mm_Latch6.5mm_Vertical +Through hole IDC header, 2x20, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x20 2.54mm double row +0 +40 +40 +Connector_IDC +IDC-Header_2x20_P2.54mm_Latch9.5mm_Vertical +Through hole IDC header, 2x20, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x20 2.54mm double row +0 +40 +40 +Connector_IDC +IDC-Header_2x20_P2.54mm_Latch12.0mm_Vertical +Through hole IDC header, 2x20, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x20 2.54mm double row +0 +40 +40 +Connector_IDC +IDC-Header_2x20_P2.54mm_Latch_Horizontal +Through hole IDC header, 2x20, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole horizontal IDC header THT 2x20 2.54mm double row +0 +40 +40 +Connector_IDC +IDC-Header_2x20_P2.54mm_Latch_Vertical +Through hole IDC header, 2x20, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x20 2.54mm double row +0 +40 +40 +Connector_IDC +IDC-Header_2x20_P2.54mm_Vertical +Through hole IDC box header, 2x20, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC box header THT 2x20 2.54mm double row +0 +40 +40 +Connector_IDC +IDC-Header_2x20_P2.54mm_Vertical_SMD +SMD IDC box header, 2x20, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://www.tme.eu/Document/4baa0e952ce73e37bc68cf730b541507/T821M114A1S100CEU-B.pdf +SMD vertical IDC box header 2x20 2.54mm double row +0 +40 +40 +Connector_IDC +IDC-Header_2x25-1MP_P2.54mm_Latch6.5mm_Vertical +Through hole IDC header, 2x25, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x25 2.54mm double row +0 +52 +51 +Connector_IDC +IDC-Header_2x25-1MP_P2.54mm_Latch9.5mm_Vertical +Through hole IDC header, 2x25, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x25 2.54mm double row +0 +52 +51 +Connector_IDC +IDC-Header_2x25-1MP_P2.54mm_Latch12.0mm_Vertical +Through hole IDC header, 2x25, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x25 2.54mm double row +0 +52 +51 +Connector_IDC +IDC-Header_2x25-1MP_P2.54mm_Latch_Horizontal +Through hole IDC header, 2x25, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole horizontal IDC header THT 2x25 2.54mm double row +0 +52 +51 +Connector_IDC +IDC-Header_2x25-1MP_P2.54mm_Latch_Vertical +Through hole IDC header, 2x25, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x25 2.54mm double row +0 +52 +51 +Connector_IDC +IDC-Header_2x25_P2.54mm_Horizontal +Through hole IDC box header, 2x25, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole horizontal IDC box header THT 2x25 2.54mm double row +0 +50 +50 +Connector_IDC +IDC-Header_2x25_P2.54mm_Latch6.5mm_Vertical +Through hole IDC header, 2x25, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x25 2.54mm double row +0 +50 +50 +Connector_IDC +IDC-Header_2x25_P2.54mm_Latch9.5mm_Vertical +Through hole IDC header, 2x25, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x25 2.54mm double row +0 +50 +50 +Connector_IDC +IDC-Header_2x25_P2.54mm_Latch12.0mm_Vertical +Through hole IDC header, 2x25, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x25 2.54mm double row +0 +50 +50 +Connector_IDC +IDC-Header_2x25_P2.54mm_Latch_Horizontal +Through hole IDC header, 2x25, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole horizontal IDC header THT 2x25 2.54mm double row +0 +50 +50 +Connector_IDC +IDC-Header_2x25_P2.54mm_Latch_Vertical +Through hole IDC header, 2x25, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x25 2.54mm double row +0 +50 +50 +Connector_IDC +IDC-Header_2x25_P2.54mm_Vertical +Through hole IDC box header, 2x25, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC box header THT 2x25 2.54mm double row +0 +50 +50 +Connector_IDC +IDC-Header_2x25_P2.54mm_Vertical_SMD +SMD IDC box header, 2x25, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://www.tme.eu/Document/4baa0e952ce73e37bc68cf730b541507/T821M114A1S100CEU-B.pdf +SMD vertical IDC box header 2x25 2.54mm double row +0 +50 +50 +Connector_IDC +IDC-Header_2x30-1MP_P2.54mm_Latch6.5mm_Vertical +Through hole IDC header, 2x30, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x30 2.54mm double row +0 +62 +61 +Connector_IDC +IDC-Header_2x30-1MP_P2.54mm_Latch9.5mm_Vertical +Through hole IDC header, 2x30, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x30 2.54mm double row +0 +62 +61 +Connector_IDC +IDC-Header_2x30-1MP_P2.54mm_Latch12.0mm_Vertical +Through hole IDC header, 2x30, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x30 2.54mm double row +0 +62 +61 +Connector_IDC +IDC-Header_2x30-1MP_P2.54mm_Latch_Horizontal +Through hole IDC header, 2x30, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole horizontal IDC header THT 2x30 2.54mm double row +0 +62 +61 +Connector_IDC +IDC-Header_2x30-1MP_P2.54mm_Latch_Vertical +Through hole IDC header, 2x30, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x30 2.54mm double row +0 +62 +61 +Connector_IDC +IDC-Header_2x30_P2.54mm_Horizontal +Through hole IDC box header, 2x30, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole horizontal IDC box header THT 2x30 2.54mm double row +0 +60 +60 +Connector_IDC +IDC-Header_2x30_P2.54mm_Latch6.5mm_Vertical +Through hole IDC header, 2x30, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x30 2.54mm double row +0 +60 +60 +Connector_IDC +IDC-Header_2x30_P2.54mm_Latch9.5mm_Vertical +Through hole IDC header, 2x30, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x30 2.54mm double row +0 +60 +60 +Connector_IDC +IDC-Header_2x30_P2.54mm_Latch12.0mm_Vertical +Through hole IDC header, 2x30, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x30 2.54mm double row +0 +60 +60 +Connector_IDC +IDC-Header_2x30_P2.54mm_Latch_Horizontal +Through hole IDC header, 2x30, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole horizontal IDC header THT 2x30 2.54mm double row +0 +60 +60 +Connector_IDC +IDC-Header_2x30_P2.54mm_Latch_Vertical +Through hole IDC header, 2x30, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x30 2.54mm double row +0 +60 +60 +Connector_IDC +IDC-Header_2x30_P2.54mm_Vertical +Through hole IDC box header, 2x30, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC box header THT 2x30 2.54mm double row +0 +60 +60 +Connector_IDC +IDC-Header_2x30_P2.54mm_Vertical_SMD +SMD IDC box header, 2x30, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://www.tme.eu/Document/4baa0e952ce73e37bc68cf730b541507/T821M114A1S100CEU-B.pdf +SMD vertical IDC box header 2x30 2.54mm double row +0 +60 +60 +Connector_IDC +IDC-Header_2x32-1MP_P2.54mm_Latch6.5mm_Vertical +Through hole IDC header, 2x32, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x32 2.54mm double row +0 +66 +65 +Connector_IDC +IDC-Header_2x32-1MP_P2.54mm_Latch9.5mm_Vertical +Through hole IDC header, 2x32, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x32 2.54mm double row +0 +66 +65 +Connector_IDC +IDC-Header_2x32-1MP_P2.54mm_Latch12.0mm_Vertical +Through hole IDC header, 2x32, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x32 2.54mm double row +0 +66 +65 +Connector_IDC +IDC-Header_2x32-1MP_P2.54mm_Latch_Horizontal +Through hole IDC header, 2x32, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole horizontal IDC header THT 2x32 2.54mm double row +0 +66 +65 +Connector_IDC +IDC-Header_2x32-1MP_P2.54mm_Latch_Vertical +Through hole IDC header, 2x32, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, mounting holes, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x32 2.54mm double row +0 +66 +65 +Connector_IDC +IDC-Header_2x32_P2.54mm_Horizontal +Through hole IDC box header, 2x32, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole horizontal IDC box header THT 2x32 2.54mm double row +0 +64 +64 +Connector_IDC +IDC-Header_2x32_P2.54mm_Latch6.5mm_Vertical +Through hole IDC header, 2x32, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 6.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x32 2.54mm double row +0 +64 +64 +Connector_IDC +IDC-Header_2x32_P2.54mm_Latch9.5mm_Vertical +Through hole IDC header, 2x32, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 9.5mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x32 2.54mm double row +0 +64 +64 +Connector_IDC +IDC-Header_2x32_P2.54mm_Latch12.0mm_Vertical +Through hole IDC header, 2x32, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, 12.0mm latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x32 2.54mm double row +0 +64 +64 +Connector_IDC +IDC-Header_2x32_P2.54mm_Latch_Horizontal +Through hole IDC header, 2x32, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole horizontal IDC header THT 2x32 2.54mm double row +0 +64 +64 +Connector_IDC +IDC-Header_2x32_P2.54mm_Latch_Vertical +Through hole IDC header, 2x32, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows latches, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC header THT 2x32 2.54mm double row +0 +64 +64 +Connector_IDC +IDC-Header_2x32_P2.54mm_Vertical +Through hole IDC box header, 2x32, 2.54mm pitch, DIN 41651 / IEC 60603-13, double rows, https://docs.google.com/spreadsheets/d/16SsEcesNF15N3Lb4niX7dcUr-NY5_MFPQhobNuNppn4/edit#gid=0 +Through hole vertical IDC box header THT 2x32 2.54mm double row +0 +64 +64 +Connector_JAE +JAE_LY20-4P-DLT1_2x02_P2.00mm_Horizontal +Molex LY 20 series connector, LY20-4P-DLT1, 2 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator +connector JAE top entry +0 +4 +4 +Connector_JAE +JAE_LY20-4P-DT1_2x02_P2.00mm_Vertical +Molex LY 20 series connector, LY20-4P-DT1, 2 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator +connector JAE side entry +0 +4 +4 +Connector_JAE +JAE_LY20-6P-DLT1_2x03_P2.00mm_Horizontal +Molex LY 20 series connector, LY20-6P-DLT1, 3 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator +connector JAE top entry +0 +6 +6 +Connector_JAE +JAE_LY20-6P-DT1_2x03_P2.00mm_Vertical +Molex LY 20 series connector, LY20-6P-DT1, 3 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator +connector JAE side entry +0 +6 +6 +Connector_JAE +JAE_LY20-8P-DLT1_2x04_P2.00mm_Horizontal +Molex LY 20 series connector, LY20-8P-DLT1, 4 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator +connector JAE top entry +0 +8 +8 +Connector_JAE +JAE_LY20-8P-DT1_2x04_P2.00mm_Vertical +Molex LY 20 series connector, LY20-8P-DT1, 4 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator +connector JAE side entry +0 +8 +8 +Connector_JAE +JAE_LY20-10P-DLT1_2x05_P2.00mm_Horizontal +Molex LY 20 series connector, LY20-10P-DLT1, 5 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator +connector JAE top entry +0 +10 +10 +Connector_JAE +JAE_LY20-10P-DT1_2x05_P2.00mm_Vertical +Molex LY 20 series connector, LY20-10P-DT1, 5 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator +connector JAE side entry +0 +10 +10 +Connector_JAE +JAE_LY20-12P-DLT1_2x06_P2.00mm_Horizontal +Molex LY 20 series connector, LY20-12P-DLT1, 6 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator +connector JAE top entry +0 +12 +12 +Connector_JAE +JAE_LY20-12P-DT1_2x06_P2.00mm_Vertical +Molex LY 20 series connector, LY20-12P-DT1, 6 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator +connector JAE side entry +0 +12 +12 +Connector_JAE +JAE_LY20-14P-DLT1_2x07_P2.00mm_Horizontal +Molex LY 20 series connector, LY20-14P-DLT1, 7 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator +connector JAE top entry +0 +14 +14 +Connector_JAE +JAE_LY20-14P-DT1_2x07_P2.00mm_Vertical +Molex LY 20 series connector, LY20-14P-DT1, 7 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator +connector JAE side entry +0 +14 +14 +Connector_JAE +JAE_LY20-16P-DLT1_2x08_P2.00mm_Horizontal +Molex LY 20 series connector, LY20-16P-DLT1, 8 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator +connector JAE top entry +0 +16 +16 +Connector_JAE +JAE_LY20-16P-DT1_2x08_P2.00mm_Vertical +Molex LY 20 series connector, LY20-16P-DT1, 8 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator +connector JAE side entry +0 +16 +16 +Connector_JAE +JAE_LY20-18P-DLT1_2x09_P2.00mm_Horizontal +Molex LY 20 series connector, LY20-18P-DLT1, 9 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator +connector JAE top entry +0 +18 +18 +Connector_JAE +JAE_LY20-18P-DT1_2x09_P2.00mm_Vertical +Molex LY 20 series connector, LY20-18P-DT1, 9 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator +connector JAE side entry +0 +18 +18 +Connector_JAE +JAE_LY20-20P-DLT1_2x10_P2.00mm_Horizontal +Molex LY 20 series connector, LY20-20P-DLT1, 10 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator +connector JAE top entry +0 +20 +20 +Connector_JAE +JAE_LY20-20P-DT1_2x10_P2.00mm_Vertical +Molex LY 20 series connector, LY20-20P-DT1, 10 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator +connector JAE side entry +0 +20 +20 +Connector_JAE +JAE_LY20-22P-DLT1_2x11_P2.00mm_Horizontal +Molex LY 20 series connector, LY20-22P-DLT1, 11 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator +connector JAE top entry +0 +22 +22 +Connector_JAE +JAE_LY20-22P-DT1_2x11_P2.00mm_Vertical +Molex LY 20 series connector, LY20-22P-DT1, 11 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator +connector JAE side entry +0 +22 +22 +Connector_JAE +JAE_LY20-24P-DLT1_2x12_P2.00mm_Horizontal +Molex LY 20 series connector, LY20-24P-DLT1, 12 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator +connector JAE top entry +0 +24 +24 +Connector_JAE +JAE_LY20-24P-DT1_2x12_P2.00mm_Vertical +Molex LY 20 series connector, LY20-24P-DT1, 12 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator +connector JAE side entry +0 +24 +24 +Connector_JAE +JAE_LY20-26P-DLT1_2x13_P2.00mm_Horizontal +Molex LY 20 series connector, LY20-26P-DLT1, 13 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator +connector JAE top entry +0 +26 +26 +Connector_JAE +JAE_LY20-26P-DT1_2x13_P2.00mm_Vertical +Molex LY 20 series connector, LY20-26P-DT1, 13 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator +connector JAE side entry +0 +26 +26 +Connector_JAE +JAE_LY20-28P-DLT1_2x14_P2.00mm_Horizontal +Molex LY 20 series connector, LY20-28P-DLT1, 14 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator +connector JAE top entry +0 +28 +28 +Connector_JAE +JAE_LY20-28P-DT1_2x14_P2.00mm_Vertical +Molex LY 20 series connector, LY20-28P-DT1, 14 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator +connector JAE side entry +0 +28 +28 +Connector_JAE +JAE_LY20-30P-DLT1_2x15_P2.00mm_Horizontal +Molex LY 20 series connector, LY20-30P-DLT1, 15 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator +connector JAE top entry +0 +30 +30 +Connector_JAE +JAE_LY20-30P-DT1_2x15_P2.00mm_Vertical +Molex LY 20 series connector, LY20-30P-DT1, 15 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator +connector JAE side entry +0 +30 +30 +Connector_JAE +JAE_LY20-32P-DLT1_2x16_P2.00mm_Horizontal +Molex LY 20 series connector, LY20-32P-DLT1, 16 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator +connector JAE top entry +0 +32 +32 +Connector_JAE +JAE_LY20-32P-DT1_2x16_P2.00mm_Vertical +Molex LY 20 series connector, LY20-32P-DT1, 16 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator +connector JAE side entry +0 +32 +32 +Connector_JAE +JAE_LY20-34P-DLT1_2x17_P2.00mm_Horizontal +Molex LY 20 series connector, LY20-34P-DLT1, 17 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator +connector JAE top entry +0 +34 +34 +Connector_JAE +JAE_LY20-34P-DT1_2x17_P2.00mm_Vertical +Molex LY 20 series connector, LY20-34P-DT1, 17 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator +connector JAE side entry +0 +34 +34 +Connector_JAE +JAE_LY20-36P-DLT1_2x18_P2.00mm_Horizontal +Molex LY 20 series connector, LY20-36P-DLT1, 18 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator +connector JAE top entry +0 +36 +36 +Connector_JAE +JAE_LY20-36P-DT1_2x18_P2.00mm_Vertical +Molex LY 20 series connector, LY20-36P-DT1, 18 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator +connector JAE side entry +0 +36 +36 +Connector_JAE +JAE_LY20-38P-DLT1_2x19_P2.00mm_Horizontal +Molex LY 20 series connector, LY20-38P-DLT1, 19 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator +connector JAE top entry +0 +38 +38 +Connector_JAE +JAE_LY20-38P-DT1_2x19_P2.00mm_Vertical +Molex LY 20 series connector, LY20-38P-DT1, 19 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator +connector JAE side entry +0 +38 +38 +Connector_JAE +JAE_LY20-40P-DLT1_2x20_P2.00mm_Horizontal +Molex LY 20 series connector, LY20-40P-DLT1, 20 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator +connector JAE top entry +0 +40 +40 +Connector_JAE +JAE_LY20-40P-DT1_2x20_P2.00mm_Vertical +Molex LY 20 series connector, LY20-40P-DT1, 20 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator +connector JAE side entry +0 +40 +40 +Connector_JAE +JAE_LY20-42P-DLT1_2x21_P2.00mm_Horizontal +Molex LY 20 series connector, LY20-42P-DLT1, 21 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator +connector JAE top entry +0 +42 +42 +Connector_JAE +JAE_LY20-42P-DT1_2x21_P2.00mm_Vertical +Molex LY 20 series connector, LY20-42P-DT1, 21 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator +connector JAE side entry +0 +42 +42 +Connector_JAE +JAE_LY20-44P-DLT1_2x22_P2.00mm_Horizontal +Molex LY 20 series connector, LY20-44P-DLT1, 22 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ038187.pdf), generated with kicad-footprint-generator +connector JAE top entry +0 +44 +44 +Connector_JAE +JAE_LY20-44P-DT1_2x22_P2.00mm_Vertical +Molex LY 20 series connector, LY20-44P-DT1, 22 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator +connector JAE side entry +0 +44 +44 +Connector_JAE +JAE_MM70-314-310B1 +http://www.heilind.com/marketing/documents/jae/JAE_MM70.pdf +connector JAE MXM +0 +280 +279 +Connector_JAE +JAE_SIM_Card_SF72S006 +SIM Card, Push-Push, https://www.jae.com/direct/topics/topics_file_download/topics_id=68892&ext_no=06&index=0&_lang=en&v=202003111511468456809 +SIM Card with Detect Switch +0 +18 +9 +Connector_JST +JST_ACH_BM01B-ACHSS-A-GAN-ETF_1x01-1MP_P1.20mm_Vertical +JST ACH series connector, BM01B-ACHSS-A-GAN-ETF (http://www.jst-mfg.com/product/pdf/eng/eACH.pdf), generated with kicad-footprint-generator +connector JST ACH vertical +0 +3 +2 +Connector_JST +JST_ACH_BM02B-ACHSS-GAN-ETF_1x02-1MP_P1.20mm_Vertical +JST ACH series connector, BM02B-ACHSS-GAN-ETF (http://www.jst-mfg.com/product/pdf/eng/eACH.pdf), generated with kicad-footprint-generator +connector JST ACH vertical +0 +4 +3 +Connector_JST +JST_ACH_BM03B-ACHSS-GAN-ETF_1x03-1MP_P1.20mm_Vertical +JST ACH series connector, BM03B-ACHSS-GAN-ETF (http://www.jst-mfg.com/product/pdf/eng/eACH.pdf), generated with kicad-footprint-generator +connector JST ACH vertical +0 +5 +4 +Connector_JST +JST_ACH_BM04B-ACHSS-A-GAN-ETF_1x04-1MP_P1.20mm_Vertical +JST ACH series connector, BM04B-ACHSS-A-GAN-ETF (http://www.jst-mfg.com/product/pdf/eng/eACH.pdf), generated with kicad-footprint-generator +connector JST ACH vertical +0 +6 +5 +Connector_JST +JST_ACH_BM05B-ACHSS-A-GAN-ETF_1x05-1MP_P1.20mm_Vertical +JST ACH series connector, BM05B-ACHSS-A-GAN-ETF (http://www.jst-mfg.com/product/pdf/eng/eACH.pdf), generated with kicad-footprint-generator +connector JST ACH vertical +0 +7 +6 +Connector_JST +JST_AUH_BM03B-AUHKS-GA-TB_1x03-1MP_P1.50mm_Vertical +JST AUH series connector, BM03B-AUHKS-GA-TB (http://www.jst-mfg.com/product/pdf/eng/eAUH.pdf), generated with kicad-footprint-generator +connector JST AUH side entry +0 +5 +4 +Connector_JST +JST_AUH_BM05B-AUHKS-GA-TB_1x05-1MP_P1.50mm_Vertical +JST AUH series connector, BM05B-AUHKS-GA-TB (http://www.jst-mfg.com/product/pdf/eng/eAUH.pdf), generated with kicad-footprint-generator +connector JST AUH side entry +0 +7 +6 +Connector_JST +JST_EH_B2B-EH-A_1x02_P2.50mm_Vertical +JST EH series connector, B2B-EH-A (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator +connector JST EH vertical +0 +2 +2 +Connector_JST +JST_EH_B3B-EH-A_1x03_P2.50mm_Vertical +JST EH series connector, B3B-EH-A (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator +connector JST EH vertical +0 +3 +3 +Connector_JST +JST_EH_B4B-EH-A_1x04_P2.50mm_Vertical +JST EH series connector, B4B-EH-A (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator +connector JST EH vertical +0 +4 +4 +Connector_JST +JST_EH_B5B-EH-A_1x05_P2.50mm_Vertical +JST EH series connector, B5B-EH-A (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator +connector JST EH vertical +0 +5 +5 +Connector_JST +JST_EH_B6B-EH-A_1x06_P2.50mm_Vertical +JST EH series connector, B6B-EH-A (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator +connector JST EH vertical +0 +6 +6 +Connector_JST +JST_EH_B7B-EH-A_1x07_P2.50mm_Vertical +JST EH series connector, B7B-EH-A (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator +connector JST EH vertical +0 +7 +7 +Connector_JST +JST_EH_B8B-EH-A_1x08_P2.50mm_Vertical +JST EH series connector, B8B-EH-A (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator +connector JST EH vertical +0 +8 +8 +Connector_JST +JST_EH_B9B-EH-A_1x09_P2.50mm_Vertical +JST EH series connector, B9B-EH-A (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator +connector JST EH vertical +0 +9 +9 +Connector_JST +JST_EH_B10B-EH-A_1x10_P2.50mm_Vertical +JST EH series connector, B10B-EH-A (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator +connector JST EH side entry +0 +10 +10 +Connector_JST +JST_EH_B11B-EH-A_1x11_P2.50mm_Vertical +JST EH series connector, B11B-EH-A (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator +connector JST EH side entry +0 +11 +11 +Connector_JST +JST_EH_B12B-EH-A_1x12_P2.50mm_Vertical +JST EH series connector, B12B-EH-A (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator +connector JST EH side entry +0 +12 +12 +Connector_JST +JST_EH_B13B-EH-A_1x13_P2.50mm_Vertical +JST EH series connector, B13B-EH-A (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator +connector JST EH side entry +0 +13 +13 +Connector_JST +JST_EH_B14B-EH-A_1x14_P2.50mm_Vertical +JST EH series connector, B14B-EH-A (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator +connector JST EH side entry +0 +14 +14 +Connector_JST +JST_EH_B15B-EH-A_1x15_P2.50mm_Vertical +JST EH series connector, B15B-EH-A (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator +connector JST EH side entry +0 +15 +15 +Connector_JST +JST_EH_S2B-EH_1x02_P2.50mm_Horizontal +JST EH series connector, S2B-EH (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator +connector JST EH horizontal +0 +2 +2 +Connector_JST +JST_EH_S3B-EH_1x03_P2.50mm_Horizontal +JST EH series connector, S3B-EH (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator +connector JST EH horizontal +0 +3 +3 +Connector_JST +JST_EH_S4B-EH_1x04_P2.50mm_Horizontal +JST EH series connector, S4B-EH (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator +connector JST EH horizontal +0 +4 +4 +Connector_JST +JST_EH_S5B-EH_1x05_P2.50mm_Horizontal +JST EH series connector, S5B-EH (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator +connector JST EH horizontal +0 +5 +5 +Connector_JST +JST_EH_S6B-EH_1x06_P2.50mm_Horizontal +JST EH series connector, S6B-EH (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator +connector JST EH horizontal +0 +6 +6 +Connector_JST +JST_EH_S7B-EH_1x07_P2.50mm_Horizontal +JST EH series connector, S7B-EH (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator +connector JST EH horizontal +0 +7 +7 +Connector_JST +JST_EH_S8B-EH_1x08_P2.50mm_Horizontal +JST EH series connector, S8B-EH (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator +connector JST EH horizontal +0 +8 +8 +Connector_JST +JST_EH_S9B-EH_1x09_P2.50mm_Horizontal +JST EH series connector, S9B-EH (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator +connector JST EH horizontal +0 +9 +9 +Connector_JST +JST_EH_S10B-EH_1x10_P2.50mm_Horizontal +JST EH series connector, S10B-EH (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator +connector JST EH top entry +0 +10 +10 +Connector_JST +JST_EH_S11B-EH_1x11_P2.50mm_Horizontal +JST EH series connector, S11B-EH (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator +connector JST EH top entry +0 +11 +11 +Connector_JST +JST_EH_S12B-EH_1x12_P2.50mm_Horizontal +JST EH series connector, S12B-EH (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator +connector JST EH top entry +0 +12 +12 +Connector_JST +JST_EH_S13B-EH_1x13_P2.50mm_Horizontal +JST EH series connector, S13B-EH (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator +connector JST EH top entry +0 +13 +13 +Connector_JST +JST_EH_S14B-EH_1x14_P2.50mm_Horizontal +JST EH series connector, S14B-EH (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator +connector JST EH top entry +0 +14 +14 +Connector_JST +JST_EH_S15B-EH_1x15_P2.50mm_Horizontal +JST EH series connector, S15B-EH (http://www.jst-mfg.com/product/pdf/eng/eEH.pdf), generated with kicad-footprint-generator +connector JST EH top entry +0 +15 +15 +Connector_JST +JST_GH_BM02B-GHS-TBT_1x02-1MP_P1.25mm_Vertical +JST GH series connector, BM02B-GHS-TBT (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator +connector JST GH side entry +0 +4 +3 +Connector_JST +JST_GH_BM03B-GHS-TBT_1x03-1MP_P1.25mm_Vertical +JST GH series connector, BM03B-GHS-TBT (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator +connector JST GH side entry +0 +5 +4 +Connector_JST +JST_GH_BM04B-GHS-TBT_1x04-1MP_P1.25mm_Vertical +JST GH series connector, BM04B-GHS-TBT (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator +connector JST GH side entry +0 +6 +5 +Connector_JST +JST_GH_BM05B-GHS-TBT_1x05-1MP_P1.25mm_Vertical +JST GH series connector, BM05B-GHS-TBT (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator +connector JST GH side entry +0 +7 +6 +Connector_JST +JST_GH_BM06B-GHS-TBT_1x06-1MP_P1.25mm_Vertical +JST GH series connector, BM06B-GHS-TBT (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator +connector JST GH side entry +0 +8 +7 +Connector_JST +JST_GH_BM07B-GHS-TBT_1x07-1MP_P1.25mm_Vertical +JST GH series connector, BM07B-GHS-TBT (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator +connector JST GH side entry +0 +9 +8 +Connector_JST +JST_GH_BM08B-GHS-TBT_1x08-1MP_P1.25mm_Vertical +JST GH series connector, BM08B-GHS-TBT (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator +connector JST GH side entry +0 +10 +9 +Connector_JST +JST_GH_BM09B-GHS-TBT_1x09-1MP_P1.25mm_Vertical +JST GH series connector, BM09B-GHS-TBT (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator +connector JST GH side entry +0 +11 +10 +Connector_JST +JST_GH_BM10B-GHS-TBT_1x10-1MP_P1.25mm_Vertical +JST GH series connector, BM10B-GHS-TBT (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator +connector JST GH side entry +0 +12 +11 +Connector_JST +JST_GH_BM11B-GHS-TBT_1x11-1MP_P1.25mm_Vertical +JST GH series connector, BM11B-GHS-TBT (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator +connector JST GH side entry +0 +13 +12 +Connector_JST +JST_GH_BM12B-GHS-TBT_1x12-1MP_P1.25mm_Vertical +JST GH series connector, BM12B-GHS-TBT (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator +connector JST GH side entry +0 +14 +13 +Connector_JST +JST_GH_BM13B-GHS-TBT_1x13-1MP_P1.25mm_Vertical +JST GH series connector, BM13B-GHS-TBT (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator +connector JST GH side entry +0 +15 +14 +Connector_JST +JST_GH_BM14B-GHS-TBT_1x14-1MP_P1.25mm_Vertical +JST GH series connector, BM14B-GHS-TBT (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator +connector JST GH side entry +0 +16 +15 +Connector_JST +JST_GH_BM15B-GHS-TBT_1x15-1MP_P1.25mm_Vertical +JST GH series connector, BM15B-GHS-TBT (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator +connector JST GH side entry +0 +17 +16 +Connector_JST +JST_GH_SM02B-GHS-TB_1x02-1MP_P1.25mm_Horizontal +JST GH series connector, SM02B-GHS-TB (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator +connector JST GH top entry +0 +4 +3 +Connector_JST +JST_GH_SM03B-GHS-TB_1x03-1MP_P1.25mm_Horizontal +JST GH series connector, SM03B-GHS-TB (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator +connector JST GH top entry +0 +5 +4 +Connector_JST +JST_GH_SM04B-GHS-TB_1x04-1MP_P1.25mm_Horizontal +JST GH series connector, SM04B-GHS-TB (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator +connector JST GH top entry +0 +6 +5 +Connector_JST +JST_GH_SM05B-GHS-TB_1x05-1MP_P1.25mm_Horizontal +JST GH series connector, SM05B-GHS-TB (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator +connector JST GH top entry +0 +7 +6 +Connector_JST +JST_GH_SM06B-GHS-TB_1x06-1MP_P1.25mm_Horizontal +JST GH series connector, SM06B-GHS-TB (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator +connector JST GH top entry +0 +8 +7 +Connector_JST +JST_GH_SM07B-GHS-TB_1x07-1MP_P1.25mm_Horizontal +JST GH series connector, SM07B-GHS-TB (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator +connector JST GH top entry +0 +9 +8 +Connector_JST +JST_GH_SM08B-GHS-TB_1x08-1MP_P1.25mm_Horizontal +JST GH series connector, SM08B-GHS-TB (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator +connector JST GH top entry +0 +10 +9 +Connector_JST +JST_GH_SM09B-GHS-TB_1x09-1MP_P1.25mm_Horizontal +JST GH series connector, SM09B-GHS-TB (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator +connector JST GH top entry +0 +11 +10 +Connector_JST +JST_GH_SM10B-GHS-TB_1x10-1MP_P1.25mm_Horizontal +JST GH series connector, SM10B-GHS-TB (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator +connector JST GH top entry +0 +12 +11 +Connector_JST +JST_GH_SM11B-GHS-TB_1x11-1MP_P1.25mm_Horizontal +JST GH series connector, SM11B-GHS-TB (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator +connector JST GH top entry +0 +13 +12 +Connector_JST +JST_GH_SM12B-GHS-TB_1x12-1MP_P1.25mm_Horizontal +JST GH series connector, SM12B-GHS-TB (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator +connector JST GH top entry +0 +14 +13 +Connector_JST +JST_GH_SM13B-GHS-TB_1x13-1MP_P1.25mm_Horizontal +JST GH series connector, SM13B-GHS-TB (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator +connector JST GH top entry +0 +15 +14 +Connector_JST +JST_GH_SM14B-GHS-TB_1x14-1MP_P1.25mm_Horizontal +JST GH series connector, SM14B-GHS-TB (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator +connector JST GH top entry +0 +16 +15 +Connector_JST +JST_GH_SM15B-GHS-TB_1x15-1MP_P1.25mm_Horizontal +JST GH series connector, SM15B-GHS-TB (http://www.jst-mfg.com/product/pdf/eng/eGH.pdf), generated with kicad-footprint-generator +connector JST GH top entry +0 +17 +16 +Connector_JST +JST_J2100_B06B-J21DK-GGXR_2x03_P2.50x4.00mm_Vertical +JST J2100 series connector, B06B-J21DK-GGXR (http://www.jst-mfg.com/product/pdf/eng/eJFA-J2000.pdf), generated with kicad-footprint-generator +connector JST J2100 vertical +0 +8 +6 +Connector_JST +JST_J2100_B08B-J21DK-GGXR_2x04_P2.50x4.00mm_Vertical +JST J2100 series connector, B08B-J21DK-GGXR (http://www.jst-mfg.com/product/pdf/eng/eJFA-J2000.pdf), generated with kicad-footprint-generator +connector JST J2100 vertical +0 +10 +8 +Connector_JST +JST_J2100_B10B-J21DK-GGXR_2x05_P2.50x4.00mm_Vertical +JST J2100 series connector, B10B-J21DK-GGXR (http://www.jst-mfg.com/product/pdf/eng/eJFA-J2000.pdf), generated with kicad-footprint-generator +connector JST J2100 vertical +0 +12 +10 +Connector_JST +JST_J2100_B12B-J21DK-GGXR_2x06_P2.50x4.00mm_Vertical +JST J2100 series connector, B12B-J21DK-GGXR (http://www.jst-mfg.com/product/pdf/eng/eJFA-J2000.pdf), generated with kicad-footprint-generator +connector JST J2100 vertical +0 +14 +12 +Connector_JST +JST_J2100_B16B-J21DK-GGXR_2x08_P2.50x4.00mm_Vertical +JST J2100 series connector, B16B-J21DK-GGXR (http://www.jst-mfg.com/product/pdf/eng/eJFA-J2000.pdf), generated with kicad-footprint-generator +connector JST J2100 vertical +0 +18 +16 +Connector_JST +JST_J2100_B20B-J21DK-GGXR_2x10_P2.50x4.00mm_Vertical +JST J2100 series connector, B20B-J21DK-GGXR (http://www.jst-mfg.com/product/pdf/eng/eJFA-J2000.pdf), generated with kicad-footprint-generator +connector JST J2100 vertical +0 +22 +20 +Connector_JST +JST_J2100_S06B-J21DK-GGXR_2x03_P2.50mm_Horizontal +JST J2100 series connector, S06B-J21DK-GGXR (http://www.jst-mfg.com/product/pdf/eng/eJFA-J2000.pdf), generated with kicad-footprint-generator +connector JST J2100 horizontal +0 +7 +6 +Connector_JST +JST_J2100_S08B-J21DK-GGXR_2x04_P2.50mm_Horizontal +JST J2100 series connector, S08B-J21DK-GGXR (http://www.jst-mfg.com/product/pdf/eng/eJFA-J2000.pdf), generated with kicad-footprint-generator +connector JST J2100 horizontal +0 +10 +8 +Connector_JST +JST_J2100_S10B-J21DK-GGXR_2x05_P2.50mm_Horizontal +JST J2100 series connector, S10B-J21DK-GGXR (http://www.jst-mfg.com/product/pdf/eng/eJFA-J2000.pdf), generated with kicad-footprint-generator +connector JST J2100 horizontal +0 +12 +10 +Connector_JST +JST_J2100_S12B-J21DK-GGXR_2x06_P2.50mm_Horizontal +JST J2100 series connector, S12B-J21DK-GGXR (http://www.jst-mfg.com/product/pdf/eng/eJFA-J2000.pdf), generated with kicad-footprint-generator +connector JST J2100 horizontal +0 +14 +12 +Connector_JST +JST_J2100_S16B-J21DK-GGXR_2x08_P2.50mm_Horizontal +JST J2100 series connector, S16B-J21DK-GGXR (http://www.jst-mfg.com/product/pdf/eng/eJFA-J2000.pdf), generated with kicad-footprint-generator +connector JST J2100 horizontal +0 +18 +16 +Connector_JST +JST_J2100_S20B-J21DK-GGXR_2x10_P2.50mm_Horizontal +JST J2100 series connector, S20B-J21DK-GGXR (http://www.jst-mfg.com/product/pdf/eng/eJFA-J2000.pdf), generated with kicad-footprint-generator +connector JST J2100 horizontal +0 +22 +20 +Connector_JST +JST_JWPF_B02B-JWPF-SK-R_1x02_P2.00mm_Vertical +JST JWPF series connector, B02B-JWPF-SK-R (http://www.jst-mfg.com/product/pdf/eng/eJWPF1.pdf), generated with kicad-footprint-generator +connector JST JWPF side entry +0 +2 +2 +Connector_JST +JST_JWPF_B03B-JWPF-SK-R_1x03_P2.00mm_Vertical +JST JWPF series connector, B03B-JWPF-SK-R (http://www.jst-mfg.com/product/pdf/eng/eJWPF1.pdf), generated with kicad-footprint-generator +connector JST JWPF side entry +0 +3 +3 +Connector_JST +JST_JWPF_B04B-JWPF-SK-R_1x04_P2.00mm_Vertical +JST JWPF series connector, B04B-JWPF-SK-R (http://www.jst-mfg.com/product/pdf/eng/eJWPF1.pdf), generated with kicad-footprint-generator +connector JST JWPF side entry +0 +4 +4 +Connector_JST +JST_JWPF_B06B-JWPF-SK-R_2x03_P2.00mm_Vertical +JST JWPF series connector, B06B-JWPF-SK-R (http://www.jst-mfg.com/product/pdf/eng/eJWPF1.pdf), generated with kicad-footprint-generator +connector JST JWPF side entry +0 +6 +6 +Connector_JST +JST_JWPF_B08B-JWPF-SK-R_2x04_P2.00mm_Vertical +JST JWPF series connector, B08B-JWPF-SK-R (http://www.jst-mfg.com/product/pdf/eng/eJWPF1.pdf), generated with kicad-footprint-generator +connector JST JWPF side entry +0 +8 +8 +Connector_JST +JST_LEA_SM02B-LEASS-TF_1x02-1MP_P4.20mm_Horizontal +JST LEA series connector, SM02B-LEASS-TF (http://www.jst-mfg.com/product/pdf/eng/eLEA.pdf), generated with kicad-footprint-generator +connector JST LEA top entry +0 +4 +3 +Connector_JST +JST_NV_B02P-NV_1x02_P5.00mm_Vertical +JST NV series connector, B02P-NV (http://www.jst-mfg.com/product/pdf/eng/eNV.pdf), generated with kicad-footprint-generator +connector JST NV side entry +0 +2 +2 +Connector_JST +JST_NV_B03P-NV_1x03_P5.00mm_Vertical +JST NV series connector, B03P-NV (http://www.jst-mfg.com/product/pdf/eng/eNV.pdf), generated with kicad-footprint-generator +connector JST NV side entry +0 +3 +3 +Connector_JST +JST_NV_B04P-NV_1x04_P5.00mm_Vertical +JST NV series connector, B04P-NV (http://www.jst-mfg.com/product/pdf/eng/eNV.pdf), generated with kicad-footprint-generator +connector JST NV side entry +0 +4 +4 +Connector_JST +JST_PHD_B8B-PHDSS_2x04_P2.00mm_Vertical +JST PHD series connector, B8B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator +connector JST PHD vertical +0 +8 +8 +Connector_JST +JST_PHD_B10B-PHDSS_2x05_P2.00mm_Vertical +JST PHD series connector, B10B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator +connector JST PHD vertical +0 +10 +10 +Connector_JST +JST_PHD_B12B-PHDSS_2x06_P2.00mm_Vertical +JST PHD series connector, B12B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator +connector JST PHD vertical +0 +12 +12 +Connector_JST +JST_PHD_B14B-PHDSS_2x07_P2.00mm_Vertical +JST PHD series connector, B14B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator +connector JST PHD vertical +0 +14 +14 +Connector_JST +JST_PHD_B16B-PHDSS_2x08_P2.00mm_Vertical +JST PHD series connector, B16B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator +connector JST PHD vertical +0 +16 +16 +Connector_JST +JST_PHD_B18B-PHDSS_2x09_P2.00mm_Vertical +JST PHD series connector, B18B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator +connector JST PHD vertical +0 +18 +18 +Connector_JST +JST_PHD_B20B-PHDSS_2x10_P2.00mm_Vertical +JST PHD series connector, B20B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator +connector JST PHD vertical +0 +20 +20 +Connector_JST +JST_PHD_B22B-PHDSS_2x11_P2.00mm_Vertical +JST PHD series connector, B22B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator +connector JST PHD vertical +0 +22 +22 +Connector_JST +JST_PHD_B24B-PHDSS_2x12_P2.00mm_Vertical +JST PHD series connector, B24B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator +connector JST PHD vertical +0 +24 +24 +Connector_JST +JST_PHD_B26B-PHDSS_2x13_P2.00mm_Vertical +JST PHD series connector, B26B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator +connector JST PHD vertical +0 +26 +26 +Connector_JST +JST_PHD_B28B-PHDSS_2x14_P2.00mm_Vertical +JST PHD series connector, B28B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator +connector JST PHD vertical +0 +28 +28 +Connector_JST +JST_PHD_B30B-PHDSS_2x15_P2.00mm_Vertical +JST PHD series connector, B30B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator +connector JST PHD vertical +0 +30 +30 +Connector_JST +JST_PHD_B32B-PHDSS_2x16_P2.00mm_Vertical +JST PHD series connector, B32B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator +connector JST PHD vertical +0 +32 +32 +Connector_JST +JST_PHD_B34B-PHDSS_2x17_P2.00mm_Vertical +JST PHD series connector, B34B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator +connector JST PHD vertical +0 +34 +34 +Connector_JST +JST_PHD_S8B-PHDSS_2x04_P2.00mm_Horizontal +JST PHD series connector, S8B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator +connector JST PHD horizontal +0 +8 +8 +Connector_JST +JST_PHD_S10B-PHDSS_2x05_P2.00mm_Horizontal +JST PHD series connector, S10B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator +connector JST PHD horizontal +0 +10 +10 +Connector_JST +JST_PHD_S12B-PHDSS_2x06_P2.00mm_Horizontal +JST PHD series connector, S12B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator +connector JST PHD horizontal +0 +12 +12 +Connector_JST +JST_PHD_S14B-PHDSS_2x07_P2.00mm_Horizontal +JST PHD series connector, S14B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator +connector JST PHD horizontal +0 +14 +14 +Connector_JST +JST_PHD_S16B-PHDSS_2x08_P2.00mm_Horizontal +JST PHD series connector, S16B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator +connector JST PHD horizontal +0 +16 +16 +Connector_JST +JST_PHD_S18B-PHDSS_2x09_P2.00mm_Horizontal +JST PHD series connector, S18B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator +connector JST PHD horizontal +0 +18 +18 +Connector_JST +JST_PHD_S20B-PHDSS_2x10_P2.00mm_Horizontal +JST PHD series connector, S20B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator +connector JST PHD horizontal +0 +20 +20 +Connector_JST +JST_PHD_S22B-PHDSS_2x11_P2.00mm_Horizontal +JST PHD series connector, S22B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator +connector JST PHD horizontal +0 +22 +22 +Connector_JST +JST_PHD_S24B-PHDSS_2x12_P2.00mm_Horizontal +JST PHD series connector, S24B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator +connector JST PHD horizontal +0 +24 +24 +Connector_JST +JST_PHD_S26B-PHDSS_2x13_P2.00mm_Horizontal +JST PHD series connector, S26B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator +connector JST PHD horizontal +0 +26 +26 +Connector_JST +JST_PHD_S28B-PHDSS_2x14_P2.00mm_Horizontal +JST PHD series connector, S28B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator +connector JST PHD horizontal +0 +28 +28 +Connector_JST +JST_PHD_S30B-PHDSS_2x15_P2.00mm_Horizontal +JST PHD series connector, S30B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator +connector JST PHD horizontal +0 +30 +30 +Connector_JST +JST_PHD_S32B-PHDSS_2x16_P2.00mm_Horizontal +JST PHD series connector, S32B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator +connector JST PHD horizontal +0 +32 +32 +Connector_JST +JST_PHD_S34B-PHDSS_2x17_P2.00mm_Horizontal +JST PHD series connector, S34B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator +connector JST PHD horizontal +0 +34 +34 +Connector_JST +JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical +JST PH series connector, B2B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH side entry +0 +2 +2 +Connector_JST +JST_PH_B2B-PH-SM4-TB_1x02-1MP_P2.00mm_Vertical +JST PH series connector, B2B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH side entry +0 +4 +3 +Connector_JST +JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical +JST PH series connector, B3B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH side entry +0 +3 +3 +Connector_JST +JST_PH_B3B-PH-SM4-TB_1x03-1MP_P2.00mm_Vertical +JST PH series connector, B3B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH side entry +0 +5 +4 +Connector_JST +JST_PH_B4B-PH-K_1x04_P2.00mm_Vertical +JST PH series connector, B4B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH side entry +0 +4 +4 +Connector_JST +JST_PH_B4B-PH-SM4-TB_1x04-1MP_P2.00mm_Vertical +JST PH series connector, B4B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH side entry +0 +6 +5 +Connector_JST +JST_PH_B5B-PH-K_1x05_P2.00mm_Vertical +JST PH series connector, B5B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH side entry +0 +5 +5 +Connector_JST +JST_PH_B5B-PH-SM4-TB_1x05-1MP_P2.00mm_Vertical +JST PH series connector, B5B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH side entry +0 +7 +6 +Connector_JST +JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical +JST PH series connector, B6B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH side entry +0 +6 +6 +Connector_JST +JST_PH_B6B-PH-SM4-TB_1x06-1MP_P2.00mm_Vertical +JST PH series connector, B6B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH side entry +0 +8 +7 +Connector_JST +JST_PH_B7B-PH-K_1x07_P2.00mm_Vertical +JST PH series connector, B7B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH side entry +0 +7 +7 +Connector_JST +JST_PH_B7B-PH-SM4-TB_1x07-1MP_P2.00mm_Vertical +JST PH series connector, B7B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH side entry +0 +9 +8 +Connector_JST +JST_PH_B8B-PH-K_1x08_P2.00mm_Vertical +JST PH series connector, B8B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH side entry +0 +8 +8 +Connector_JST +JST_PH_B8B-PH-SM4-TB_1x08-1MP_P2.00mm_Vertical +JST PH series connector, B8B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH side entry +0 +10 +9 +Connector_JST +JST_PH_B9B-PH-K_1x09_P2.00mm_Vertical +JST PH series connector, B9B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH side entry +0 +9 +9 +Connector_JST +JST_PH_B9B-PH-SM4-TB_1x09-1MP_P2.00mm_Vertical +JST PH series connector, B9B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH side entry +0 +11 +10 +Connector_JST +JST_PH_B10B-PH-K_1x10_P2.00mm_Vertical +JST PH series connector, B10B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH side entry +0 +10 +10 +Connector_JST +JST_PH_B10B-PH-SM4-TB_1x10-1MP_P2.00mm_Vertical +JST PH series connector, B10B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH side entry +0 +12 +11 +Connector_JST +JST_PH_B11B-PH-K_1x11_P2.00mm_Vertical +JST PH series connector, B11B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH side entry +0 +11 +11 +Connector_JST +JST_PH_B11B-PH-SM4-TB_1x11-1MP_P2.00mm_Vertical +JST PH series connector, B11B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH side entry +0 +13 +12 +Connector_JST +JST_PH_B12B-PH-K_1x12_P2.00mm_Vertical +JST PH series connector, B12B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH side entry +0 +12 +12 +Connector_JST +JST_PH_B12B-PH-SM4-TB_1x12-1MP_P2.00mm_Vertical +JST PH series connector, B12B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH side entry +0 +14 +13 +Connector_JST +JST_PH_B13B-PH-K_1x13_P2.00mm_Vertical +JST PH series connector, B13B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH side entry +0 +13 +13 +Connector_JST +JST_PH_B13B-PH-SM4-TB_1x13-1MP_P2.00mm_Vertical +JST PH series connector, B13B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH side entry +0 +15 +14 +Connector_JST +JST_PH_B14B-PH-K_1x14_P2.00mm_Vertical +JST PH series connector, B14B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH side entry +0 +14 +14 +Connector_JST +JST_PH_B14B-PH-SM4-TB_1x14-1MP_P2.00mm_Vertical +JST PH series connector, B14B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH side entry +0 +16 +15 +Connector_JST +JST_PH_B15B-PH-K_1x15_P2.00mm_Vertical +JST PH series connector, B15B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH side entry +0 +15 +15 +Connector_JST +JST_PH_B15B-PH-SM4-TB_1x15-1MP_P2.00mm_Vertical +JST PH series connector, B15B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH side entry +0 +17 +16 +Connector_JST +JST_PH_B16B-PH-K_1x16_P2.00mm_Vertical +JST PH series connector, B16B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH side entry +0 +16 +16 +Connector_JST +JST_PH_B16B-PH-SM4-TB_1x16-1MP_P2.00mm_Vertical +JST PH series connector, B16B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH side entry +0 +18 +17 +Connector_JST +JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal +JST PH series connector, S2B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH top entry +0 +2 +2 +Connector_JST +JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal +JST PH series connector, S2B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH top entry +0 +4 +3 +Connector_JST +JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal +JST PH series connector, S3B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH top entry +0 +3 +3 +Connector_JST +JST_PH_S3B-PH-SM4-TB_1x03-1MP_P2.00mm_Horizontal +JST PH series connector, S3B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH top entry +0 +5 +4 +Connector_JST +JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal +JST PH series connector, S4B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH top entry +0 +4 +4 +Connector_JST +JST_PH_S4B-PH-SM4-TB_1x04-1MP_P2.00mm_Horizontal +JST PH series connector, S4B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH top entry +0 +6 +5 +Connector_JST +JST_PH_S5B-PH-K_1x05_P2.00mm_Horizontal +JST PH series connector, S5B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH top entry +0 +5 +5 +Connector_JST +JST_PH_S5B-PH-SM4-TB_1x05-1MP_P2.00mm_Horizontal +JST PH series connector, S5B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH top entry +0 +7 +6 +Connector_JST +JST_PH_S6B-PH-K_1x06_P2.00mm_Horizontal +JST PH series connector, S6B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH top entry +0 +6 +6 +Connector_JST +JST_PH_S6B-PH-SM4-TB_1x06-1MP_P2.00mm_Horizontal +JST PH series connector, S6B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH top entry +0 +8 +7 +Connector_JST +JST_PH_S7B-PH-K_1x07_P2.00mm_Horizontal +JST PH series connector, S7B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH top entry +0 +7 +7 +Connector_JST +JST_PH_S7B-PH-SM4-TB_1x07-1MP_P2.00mm_Horizontal +JST PH series connector, S7B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH top entry +0 +9 +8 +Connector_JST +JST_PH_S8B-PH-K_1x08_P2.00mm_Horizontal +JST PH series connector, S8B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH top entry +0 +8 +8 +Connector_JST +JST_PH_S8B-PH-SM4-TB_1x08-1MP_P2.00mm_Horizontal +JST PH series connector, S8B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH top entry +0 +10 +9 +Connector_JST +JST_PH_S9B-PH-K_1x09_P2.00mm_Horizontal +JST PH series connector, S9B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH top entry +0 +9 +9 +Connector_JST +JST_PH_S9B-PH-SM4-TB_1x09-1MP_P2.00mm_Horizontal +JST PH series connector, S9B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH top entry +0 +11 +10 +Connector_JST +JST_PH_S10B-PH-K_1x10_P2.00mm_Horizontal +JST PH series connector, S10B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH top entry +0 +10 +10 +Connector_JST +JST_PH_S10B-PH-SM4-TB_1x10-1MP_P2.00mm_Horizontal +JST PH series connector, S10B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH top entry +0 +12 +11 +Connector_JST +JST_PH_S11B-PH-K_1x11_P2.00mm_Horizontal +JST PH series connector, S11B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH top entry +0 +11 +11 +Connector_JST +JST_PH_S11B-PH-SM4-TB_1x11-1MP_P2.00mm_Horizontal +JST PH series connector, S11B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH top entry +0 +13 +12 +Connector_JST +JST_PH_S12B-PH-K_1x12_P2.00mm_Horizontal +JST PH series connector, S12B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH top entry +0 +12 +12 +Connector_JST +JST_PH_S12B-PH-SM4-TB_1x12-1MP_P2.00mm_Horizontal +JST PH series connector, S12B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH top entry +0 +14 +13 +Connector_JST +JST_PH_S13B-PH-K_1x13_P2.00mm_Horizontal +JST PH series connector, S13B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH top entry +0 +13 +13 +Connector_JST +JST_PH_S13B-PH-SM4-TB_1x13-1MP_P2.00mm_Horizontal +JST PH series connector, S13B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH top entry +0 +15 +14 +Connector_JST +JST_PH_S14B-PH-K_1x14_P2.00mm_Horizontal +JST PH series connector, S14B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH top entry +0 +14 +14 +Connector_JST +JST_PH_S14B-PH-SM4-TB_1x14-1MP_P2.00mm_Horizontal +JST PH series connector, S14B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH top entry +0 +16 +15 +Connector_JST +JST_PH_S15B-PH-K_1x15_P2.00mm_Horizontal +JST PH series connector, S15B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH top entry +0 +15 +15 +Connector_JST +JST_PH_S15B-PH-SM4-TB_1x15-1MP_P2.00mm_Horizontal +JST PH series connector, S15B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH top entry +0 +17 +16 +Connector_JST +JST_PH_S16B-PH-K_1x16_P2.00mm_Horizontal +JST PH series connector, S16B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator +connector JST PH top entry +0 +16 +16 +Connector_JST +JST_PUD_B08B-PUDSS_2x04_P2.00mm_Vertical +JST PUD series connector, B08B-PUDSS (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator +connector JST PUD side entry +0 +8 +8 +Connector_JST +JST_PUD_B10B-PUDSS_2x05_P2.00mm_Vertical +JST PUD series connector, B10B-PUDSS (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator +connector JST PUD side entry +0 +10 +10 +Connector_JST +JST_PUD_B12B-PUDSS_2x06_P2.00mm_Vertical +JST PUD series connector, B12B-PUDSS (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator +connector JST PUD side entry +0 +12 +12 +Connector_JST +JST_PUD_B14B-PUDSS_2x07_P2.00mm_Vertical +JST PUD series connector, B14B-PUDSS (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator +connector JST PUD side entry +0 +14 +14 +Connector_JST +JST_PUD_B16B-PUDSS_2x08_P2.00mm_Vertical +JST PUD series connector, B16B-PUDSS (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator +connector JST PUD side entry +0 +16 +16 +Connector_JST +JST_PUD_B18B-PUDSS_2x09_P2.00mm_Vertical +JST PUD series connector, B18B-PUDSS (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator +connector JST PUD side entry +0 +18 +18 +Connector_JST +JST_PUD_B20B-PUDSS_2x10_P2.00mm_Vertical +JST PUD series connector, B20B-PUDSS (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator +connector JST PUD side entry +0 +20 +20 +Connector_JST +JST_PUD_B22B-PUDSS_2x11_P2.00mm_Vertical +JST PUD series connector, B22B-PUDSS (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator +connector JST PUD side entry +0 +22 +22 +Connector_JST +JST_PUD_B24B-PUDSS_2x12_P2.00mm_Vertical +JST PUD series connector, B24B-PUDSS (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator +connector JST PUD side entry +0 +24 +24 +Connector_JST +JST_PUD_B26B-PUDSS_2x13_P2.00mm_Vertical +JST PUD series connector, B26B-PUDSS (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator +connector JST PUD side entry +0 +26 +26 +Connector_JST +JST_PUD_B28B-PUDSS_2x14_P2.00mm_Vertical +JST PUD series connector, B28B-PUDSS (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator +connector JST PUD side entry +0 +28 +28 +Connector_JST +JST_PUD_B30B-PUDSS_2x15_P2.00mm_Vertical +JST PUD series connector, B30B-PUDSS (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator +connector JST PUD side entry +0 +30 +30 +Connector_JST +JST_PUD_B32B-PUDSS_2x16_P2.00mm_Vertical +JST PUD series connector, B32B-PUDSS (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator +connector JST PUD side entry +0 +32 +32 +Connector_JST +JST_PUD_B34B-PUDSS_2x17_P2.00mm_Vertical +JST PUD series connector, B34B-PUDSS (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator +connector JST PUD side entry +0 +34 +34 +Connector_JST +JST_PUD_B36B-PUDSS_2x18_P2.00mm_Vertical +JST PUD series connector, B36B-PUDSS (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator +connector JST PUD side entry +0 +36 +36 +Connector_JST +JST_PUD_B38B-PUDSS_2x19_P2.00mm_Vertical +JST PUD series connector, B38B-PUDSS (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator +connector JST PUD side entry +0 +38 +38 +Connector_JST +JST_PUD_B40B-PUDSS_2x20_P2.00mm_Vertical +JST PUD series connector, B40B-PUDSS (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator +connector JST PUD side entry +0 +40 +40 +Connector_JST +JST_PUD_S08B-PUDSS-1_2x04_P2.00mm_Horizontal +JST PUD series connector, S08B-PUDSS-1 (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator +connector JST PUD top entry +0 +8 +8 +Connector_JST +JST_PUD_S10B-PUDSS-1_2x05_P2.00mm_Horizontal +JST PUD series connector, S10B-PUDSS-1 (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator +connector JST PUD top entry +0 +10 +10 +Connector_JST +JST_PUD_S12B-PUDSS-1_2x06_P2.00mm_Horizontal +JST PUD series connector, S12B-PUDSS-1 (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator +connector JST PUD top entry +0 +12 +12 +Connector_JST +JST_PUD_S14B-PUDSS-1_2x07_P2.00mm_Horizontal +JST PUD series connector, S14B-PUDSS-1 (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator +connector JST PUD top entry +0 +14 +14 +Connector_JST +JST_PUD_S16B-PUDSS-1_2x08_P2.00mm_Horizontal +JST PUD series connector, S16B-PUDSS-1 (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator +connector JST PUD top entry +0 +16 +16 +Connector_JST +JST_PUD_S18B-PUDSS-1_2x09_P2.00mm_Horizontal +JST PUD series connector, S18B-PUDSS-1 (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator +connector JST PUD top entry +0 +18 +18 +Connector_JST +JST_PUD_S20B-PUDSS-1_2x10_P2.00mm_Horizontal +JST PUD series connector, S20B-PUDSS-1 (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator +connector JST PUD top entry +0 +20 +20 +Connector_JST +JST_PUD_S22B-PUDSS-1_2x11_P2.00mm_Horizontal +JST PUD series connector, S22B-PUDSS-1 (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator +connector JST PUD top entry +0 +22 +22 +Connector_JST +JST_PUD_S24B-PUDSS-1_2x12_P2.00mm_Horizontal +JST PUD series connector, S24B-PUDSS-1 (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator +connector JST PUD top entry +0 +24 +24 +Connector_JST +JST_PUD_S26B-PUDSS-1_2x13_P2.00mm_Horizontal +JST PUD series connector, S26B-PUDSS-1 (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator +connector JST PUD top entry +0 +26 +26 +Connector_JST +JST_PUD_S28B-PUDSS-1_2x14_P2.00mm_Horizontal +JST PUD series connector, S28B-PUDSS-1 (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator +connector JST PUD top entry +0 +28 +28 +Connector_JST +JST_PUD_S30B-PUDSS-1_2x15_P2.00mm_Horizontal +JST PUD series connector, S30B-PUDSS-1 (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator +connector JST PUD top entry +0 +30 +30 +Connector_JST +JST_PUD_S32B-PUDSS-1_2x16_P2.00mm_Horizontal +JST PUD series connector, S32B-PUDSS-1 (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator +connector JST PUD top entry +0 +32 +32 +Connector_JST +JST_PUD_S34B-PUDSS-1_2x17_P2.00mm_Horizontal +JST PUD series connector, S34B-PUDSS-1 (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator +connector JST PUD top entry +0 +34 +34 +Connector_JST +JST_PUD_S36B-PUDSS-1_2x18_P2.00mm_Horizontal +JST PUD series connector, S36B-PUDSS-1 (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator +connector JST PUD top entry +0 +36 +36 +Connector_JST +JST_PUD_S38B-PUDSS-1_2x19_P2.00mm_Horizontal +JST PUD series connector, S38B-PUDSS-1 (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator +connector JST PUD top entry +0 +38 +38 +Connector_JST +JST_PUD_S40B-PUDSS-1_2x20_P2.00mm_Horizontal +JST PUD series connector, S40B-PUDSS-1 (http://www.jst-mfg.com/product/pdf/eng/ePUD.pdf), generated with kicad-footprint-generator +connector JST PUD top entry +0 +40 +40 +Connector_JST +JST_SFH_SM02B-SFHRS-TF_1x02-1MP_P4.20mm_Horizontal +JST SFH series connector, SM02B-SFHRS-TF (http://www.jst-mfg.com/product/pdf/eng/eSFH.pdf), generated with kicad-footprint-generator +connector JST SFH horizontal +0 +4 +3 +Connector_JST +JST_SHL_SM02B-SHLS-TF_1x02-1MP_P1.00mm_Horizontal +JST SHL series connector, SM02B-SHLS-TF (http://www.jst-mfg.com/product/pdf/eng/eSHL.pdf), generated with kicad-footprint-generator +connector JST SHL top entry +0 +4 +3 +Connector_JST +JST_SHL_SM05B-SHLS-TF_1x05-1MP_P1.00mm_Horizontal +JST SHL series connector, SM05B-SHLS-TF (http://www.jst-mfg.com/product/pdf/eng/eSHL.pdf), generated with kicad-footprint-generator +connector JST SHL top entry +0 +7 +6 +Connector_JST +JST_SHL_SM06B-SHLS-TF_1x06-1MP_P1.00mm_Horizontal +JST SHL series connector, SM06B-SHLS-TF (http://www.jst-mfg.com/product/pdf/eng/eSHL.pdf), generated with kicad-footprint-generator +connector JST SHL top entry +0 +8 +7 +Connector_JST +JST_SHL_SM07B-SHLS-TF_1x07-1MP_P1.00mm_Horizontal +JST SHL series connector, SM07B-SHLS-TF (http://www.jst-mfg.com/product/pdf/eng/eSHL.pdf), generated with kicad-footprint-generator +connector JST SHL top entry +0 +9 +8 +Connector_JST +JST_SHL_SM08B-SHLS-TF_1x08-1MP_P1.00mm_Horizontal +JST SHL series connector, SM08B-SHLS-TF (http://www.jst-mfg.com/product/pdf/eng/eSHL.pdf), generated with kicad-footprint-generator +connector JST SHL top entry +0 +10 +9 +Connector_JST +JST_SHL_SM10B-SHLS-TF_1x10-1MP_P1.00mm_Horizontal +JST SHL series connector, SM10B-SHLS-TF (http://www.jst-mfg.com/product/pdf/eng/eSHL.pdf), generated with kicad-footprint-generator +connector JST SHL top entry +0 +12 +11 +Connector_JST +JST_SHL_SM11B-SHLS-TF_1x11-1MP_P1.00mm_Horizontal +JST SHL series connector, SM11B-SHLS-TF (http://www.jst-mfg.com/product/pdf/eng/eSHL.pdf), generated with kicad-footprint-generator +connector JST SHL top entry +0 +13 +12 +Connector_JST +JST_SHL_SM12B-SHLS-TF_1x12-1MP_P1.00mm_Horizontal +JST SHL series connector, SM12B-SHLS-TF (http://www.jst-mfg.com/product/pdf/eng/eSHL.pdf), generated with kicad-footprint-generator +connector JST SHL top entry +0 +14 +13 +Connector_JST +JST_SHL_SM14B-SHLS-TF_1x14-1MP_P1.00mm_Horizontal +JST SHL series connector, SM14B-SHLS-TF (http://www.jst-mfg.com/product/pdf/eng/eSHL.pdf), generated with kicad-footprint-generator +connector JST SHL top entry +0 +16 +15 +Connector_JST +JST_SHL_SM16B-SHLS-TF_1x16-1MP_P1.00mm_Horizontal +JST SHL series connector, SM16B-SHLS-TF (http://www.jst-mfg.com/product/pdf/eng/eSHL.pdf), generated with kicad-footprint-generator +connector JST SHL top entry +0 +18 +17 +Connector_JST +JST_SHL_SM20B-SHLS-TF_1x20-1MP_P1.00mm_Horizontal +JST SHL series connector, SM20B-SHLS-TF (http://www.jst-mfg.com/product/pdf/eng/eSHL.pdf), generated with kicad-footprint-generator +connector JST SHL top entry +0 +22 +21 +Connector_JST +JST_SHL_SM22B-SHLS-TF_1x22-1MP_P1.00mm_Horizontal +JST SHL series connector, SM22B-SHLS-TF (http://www.jst-mfg.com/product/pdf/eng/eSHL.pdf), generated with kicad-footprint-generator +connector JST SHL top entry +0 +24 +23 +Connector_JST +JST_SHL_SM26B-SHLS-TF_1x26-1MP_P1.00mm_Horizontal +JST SHL series connector, SM26B-SHLS-TF (http://www.jst-mfg.com/product/pdf/eng/eSHL.pdf), generated with kicad-footprint-generator +connector JST SHL top entry +0 +28 +27 +Connector_JST +JST_SHL_SM30B-SHLS-TF_1x30-1MP_P1.00mm_Horizontal +JST SHL series connector, SM30B-SHLS-TF (http://www.jst-mfg.com/product/pdf/eng/eSHL.pdf), generated with kicad-footprint-generator +connector JST SHL top entry +0 +32 +31 +Connector_JST +JST_SH_BM02B-SRSS-TB_1x02-1MP_P1.00mm_Vertical +JST SH series connector, BM02B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator +connector JST SH side entry +0 +4 +3 +Connector_JST +JST_SH_BM03B-SRSS-TB_1x03-1MP_P1.00mm_Vertical +JST SH series connector, BM03B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator +connector JST SH side entry +0 +5 +4 +Connector_JST +JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical +JST SH series connector, BM04B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator +connector JST SH side entry +0 +6 +5 +Connector_JST +JST_SH_BM05B-SRSS-TB_1x05-1MP_P1.00mm_Vertical +JST SH series connector, BM05B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator +connector JST SH side entry +0 +7 +6 +Connector_JST +JST_SH_BM06B-SRSS-TB_1x06-1MP_P1.00mm_Vertical +JST SH series connector, BM06B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator +connector JST SH side entry +0 +8 +7 +Connector_JST +JST_SH_BM07B-SRSS-TB_1x07-1MP_P1.00mm_Vertical +JST SH series connector, BM07B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator +connector JST SH side entry +0 +9 +8 +Connector_JST +JST_SH_BM08B-SRSS-TB_1x08-1MP_P1.00mm_Vertical +JST SH series connector, BM08B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator +connector JST SH side entry +0 +10 +9 +Connector_JST +JST_SH_BM09B-SRSS-TB_1x09-1MP_P1.00mm_Vertical +JST SH series connector, BM09B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator +connector JST SH side entry +0 +11 +10 +Connector_JST +JST_SH_BM10B-SRSS-TB_1x10-1MP_P1.00mm_Vertical +JST SH series connector, BM10B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator +connector JST SH side entry +0 +12 +11 +Connector_JST +JST_SH_BM11B-SRSS-TB_1x11-1MP_P1.00mm_Vertical +JST SH series connector, BM11B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator +connector JST SH side entry +0 +13 +12 +Connector_JST +JST_SH_BM12B-SRSS-TB_1x12-1MP_P1.00mm_Vertical +JST SH series connector, BM12B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator +connector JST SH side entry +0 +14 +13 +Connector_JST +JST_SH_BM13B-SRSS-TB_1x13-1MP_P1.00mm_Vertical +JST SH series connector, BM13B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator +connector JST SH side entry +0 +15 +14 +Connector_JST +JST_SH_BM14B-SRSS-TB_1x14-1MP_P1.00mm_Vertical +JST SH series connector, BM14B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator +connector JST SH side entry +0 +16 +15 +Connector_JST +JST_SH_BM15B-SRSS-TB_1x15-1MP_P1.00mm_Vertical +JST SH series connector, BM15B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator +connector JST SH side entry +0 +17 +16 +Connector_JST +JST_SH_SM02B-SRSS-TB_1x02-1MP_P1.00mm_Horizontal +JST SH series connector, SM02B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator +connector JST SH top entry +0 +4 +3 +Connector_JST +JST_SH_SM03B-SRSS-TB_1x03-1MP_P1.00mm_Horizontal +JST SH series connector, SM03B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator +connector JST SH top entry +0 +5 +4 +Connector_JST +JST_SH_SM04B-SRSS-TB_1x04-1MP_P1.00mm_Horizontal +JST SH series connector, SM04B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator +connector JST SH top entry +0 +6 +5 +Connector_JST +JST_SH_SM05B-SRSS-TB_1x05-1MP_P1.00mm_Horizontal +JST SH series connector, SM05B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator +connector JST SH top entry +0 +7 +6 +Connector_JST +JST_SH_SM06B-SRSS-TB_1x06-1MP_P1.00mm_Horizontal +JST SH series connector, SM06B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator +connector JST SH top entry +0 +8 +7 +Connector_JST +JST_SH_SM07B-SRSS-TB_1x07-1MP_P1.00mm_Horizontal +JST SH series connector, SM07B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator +connector JST SH top entry +0 +9 +8 +Connector_JST +JST_SH_SM08B-SRSS-TB_1x08-1MP_P1.00mm_Horizontal +JST SH series connector, SM08B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator +connector JST SH top entry +0 +10 +9 +Connector_JST +JST_SH_SM09B-SRSS-TB_1x09-1MP_P1.00mm_Horizontal +JST SH series connector, SM09B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator +connector JST SH top entry +0 +11 +10 +Connector_JST +JST_SH_SM10B-SRSS-TB_1x10-1MP_P1.00mm_Horizontal +JST SH series connector, SM10B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator +connector JST SH top entry +0 +12 +11 +Connector_JST +JST_SH_SM11B-SRSS-TB_1x11-1MP_P1.00mm_Horizontal +JST SH series connector, SM11B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator +connector JST SH top entry +0 +13 +12 +Connector_JST +JST_SH_SM12B-SRSS-TB_1x12-1MP_P1.00mm_Horizontal +JST SH series connector, SM12B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator +connector JST SH top entry +0 +14 +13 +Connector_JST +JST_SH_SM13B-SRSS-TB_1x13-1MP_P1.00mm_Horizontal +JST SH series connector, SM13B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator +connector JST SH top entry +0 +15 +14 +Connector_JST +JST_SH_SM14B-SRSS-TB_1x14-1MP_P1.00mm_Horizontal +JST SH series connector, SM14B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator +connector JST SH top entry +0 +16 +15 +Connector_JST +JST_SH_SM15B-SRSS-TB_1x15-1MP_P1.00mm_Horizontal +JST SH series connector, SM15B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator +connector JST SH top entry +0 +17 +16 +Connector_JST +JST_SH_SM20B-SRSS-TB_1x20-1MP_P1.00mm_Horizontal +JST SH series connector, SM20B-SRSS-TB (http://www.jst-mfg.com/product/pdf/eng/eSH.pdf), generated with kicad-footprint-generator +connector JST SH top entry +0 +22 +21 +Connector_JST +JST_SUR_BM02B-SURS-TF_1x02-1MP_P0.80mm_Vertical +JST SUR series connector, BM02B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator +connector JST SUR side entry +0 +4 +3 +Connector_JST +JST_SUR_BM03B-SURS-TF_1x03-1MP_P0.80mm_Vertical +JST SUR series connector, BM03B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator +connector JST SUR side entry +0 +5 +4 +Connector_JST +JST_SUR_BM04B-SURS-TF_1x04-1MP_P0.80mm_Vertical +JST SUR series connector, BM04B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator +connector JST SUR side entry +0 +6 +5 +Connector_JST +JST_SUR_BM05B-SURS-TF_1x05-1MP_P0.80mm_Vertical +JST SUR series connector, BM05B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator +connector JST SUR side entry +0 +7 +6 +Connector_JST +JST_SUR_BM06B-SURS-TF_1x06-1MP_P0.80mm_Vertical +JST SUR series connector, BM06B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator +connector JST SUR side entry +0 +8 +7 +Connector_JST +JST_SUR_BM08B-SURS-TF_1x08-1MP_P0.80mm_Vertical +JST SUR series connector, BM08B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator +connector JST SUR side entry +0 +10 +9 +Connector_JST +JST_SUR_BM10B-SURS-TF_1x10-1MP_P0.80mm_Vertical +JST SUR series connector, BM10B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator +connector JST SUR side entry +0 +12 +11 +Connector_JST +JST_SUR_BM12B-SURS-TF_1x12-1MP_P0.80mm_Vertical +JST SUR series connector, BM12B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator +connector JST SUR side entry +0 +14 +13 +Connector_JST +JST_SUR_BM14B-SURS-TF_1x14-1MP_P0.80mm_Vertical +JST SUR series connector, BM14B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator +connector JST SUR side entry +0 +16 +15 +Connector_JST +JST_SUR_BM15B-SURS-TF_1x15-1MP_P0.80mm_Vertical +JST SUR series connector, BM15B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator +connector JST SUR side entry +0 +17 +16 +Connector_JST +JST_SUR_BM16B-SURS-TF_1x16-1MP_P0.80mm_Vertical +JST SUR series connector, BM16B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator +connector JST SUR side entry +0 +18 +17 +Connector_JST +JST_SUR_BM17B-SURS-TF_1x17-1MP_P0.80mm_Vertical +JST SUR series connector, BM17B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator +connector JST SUR side entry +0 +19 +18 +Connector_JST +JST_SUR_BM20B-SURS-TF_1x20-1MP_P0.80mm_Vertical +JST SUR series connector, BM20B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator +connector JST SUR side entry +0 +22 +21 +Connector_JST +JST_SUR_SM02B-SURS-TF_1x02-1MP_P0.80mm_Horizontal +JST SUR series connector, SM02B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator +connector JST SUR top entry +0 +4 +3 +Connector_JST +JST_SUR_SM03B-SURS-TF_1x03-1MP_P0.80mm_Horizontal +JST SUR series connector, SM03B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator +connector JST SUR top entry +0 +5 +4 +Connector_JST +JST_SUR_SM04B-SURS-TF_1x04-1MP_P0.80mm_Horizontal +JST SUR series connector, SM04B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator +connector JST SUR top entry +0 +6 +5 +Connector_JST +JST_SUR_SM05B-SURS-TF_1x05-1MP_P0.80mm_Horizontal +JST SUR series connector, SM05B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator +connector JST SUR top entry +0 +7 +6 +Connector_JST +JST_SUR_SM06B-SURS-TF_1x06-1MP_P0.80mm_Horizontal +JST SUR series connector, SM06B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator +connector JST SUR top entry +0 +8 +7 +Connector_JST +JST_SUR_SM08B-SURS-TF_1x08-1MP_P0.80mm_Horizontal +JST SUR series connector, SM08B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator +connector JST SUR top entry +0 +10 +9 +Connector_JST +JST_SUR_SM10B-SURS-TF_1x10-1MP_P0.80mm_Horizontal +JST SUR series connector, SM10B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator +connector JST SUR top entry +0 +12 +11 +Connector_JST +JST_SUR_SM12B-SURS-TF_1x12-1MP_P0.80mm_Horizontal +JST SUR series connector, SM12B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator +connector JST SUR top entry +0 +14 +13 +Connector_JST +JST_SUR_SM14B-SURS-TF_1x14-1MP_P0.80mm_Horizontal +JST SUR series connector, SM14B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator +connector JST SUR top entry +0 +16 +15 +Connector_JST +JST_SUR_SM15B-SURS-TF_1x15-1MP_P0.80mm_Horizontal +JST SUR series connector, SM15B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator +connector JST SUR top entry +0 +17 +16 +Connector_JST +JST_SUR_SM16B-SURS-TF_1x16-1MP_P0.80mm_Horizontal +JST SUR series connector, SM16B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator +connector JST SUR top entry +0 +18 +17 +Connector_JST +JST_SUR_SM17B-SURS-TF_1x17-1MP_P0.80mm_Horizontal +JST SUR series connector, SM17B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator +connector JST SUR top entry +0 +19 +18 +Connector_JST +JST_SUR_SM20B-SURS-TF_1x20-1MP_P0.80mm_Horizontal +JST SUR series connector, SM20B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator +connector JST SUR top entry +0 +22 +21 +Connector_JST +JST_SUR_SM22B-SURS-TF_1x22-1MP_P0.80mm_Horizontal +JST SUR series connector, SM22B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator +connector JST SUR top entry +0 +24 +23 +Connector_JST +JST_VH_B2P-VH-B_1x02_P3.96mm_Vertical +JST VH PBT series connector, B2P-VH-B (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator +connector JST VH vertical +0 +2 +2 +Connector_JST +JST_VH_B2P-VH-FB-B_1x02_P3.96mm_Vertical +JST VH series connector, B2P-VH-FB-B, shrouded (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator +connector JST VH side entry +0 +2 +2 +Connector_JST +JST_VH_B2P-VH_1x02_P3.96mm_Vertical +JST VH series connector, B2P-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator +connector JST VH vertical +0 +2 +2 +Connector_JST +JST_VH_B2P3-VH_1x02_P7.92mm_Vertical +JST VH series connector, B2P3-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator +connector JST VH vertical +0 +2 +2 +Connector_JST +JST_VH_B2PS-VH_1x02_P3.96mm_Horizontal +JST VH series connector, B2PS-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator +connector JST VH top entry +0 +2 +2 +Connector_JST +JST_VH_B3P-VH-B_1x03_P3.96mm_Vertical +JST VH PBT series connector, B3P-VH-B (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator +connector JST VH vertical +0 +3 +3 +Connector_JST +JST_VH_B3P-VH-FB-B_1x03_P3.96mm_Vertical +JST VH series connector, B3P-VH-FB-B, shrouded (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator +connector JST VH side entry +0 +3 +3 +Connector_JST +JST_VH_B3P-VH_1x03_P3.96mm_Vertical +JST VH series connector, B3P-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator +connector JST VH vertical +0 +3 +3 +Connector_JST +JST_VH_B3PS-VH_1x03_P3.96mm_Horizontal +JST VH series connector, B3PS-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator +connector JST VH top entry +0 +3 +3 +Connector_JST +JST_VH_B4P-VH-B_1x04_P3.96mm_Vertical +JST VH PBT series connector, B4P-VH-B (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator +connector JST VH vertical +0 +4 +4 +Connector_JST +JST_VH_B4P-VH-FB-B_1x04_P3.96mm_Vertical +JST VH series connector, B4P-VH-FB-B, shrouded (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator +connector JST VH side entry +0 +4 +4 +Connector_JST +JST_VH_B4P-VH_1x04_P3.96mm_Vertical +JST VH series connector, B4P-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator +connector JST VH vertical +0 +4 +4 +Connector_JST +JST_VH_B4PS-VH_1x04_P3.96mm_Horizontal +JST VH series connector, B4PS-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator +connector JST VH top entry +0 +4 +4 +Connector_JST +JST_VH_B5P-VH-B_1x05_P3.96mm_Vertical +JST VH PBT series connector, B5P-VH-B (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator +connector JST VH vertical +0 +5 +5 +Connector_JST +JST_VH_B5P-VH-FB-B_1x05_P3.96mm_Vertical +JST VH series connector, B5P-VH-FB-B, shrouded (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator +connector JST VH side entry +0 +5 +5 +Connector_JST +JST_VH_B5P-VH_1x05_P3.96mm_Vertical +JST VH series connector, B5P-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator +connector JST VH vertical +0 +5 +5 +Connector_JST +JST_VH_B5PS-VH_1x05_P3.96mm_Horizontal +JST VH series connector, B5PS-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator +connector JST VH top entry +0 +5 +5 +Connector_JST +JST_VH_B6P-VH-B_1x06_P3.96mm_Vertical +JST VH PBT series connector, B6P-VH-B (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator +connector JST VH vertical +0 +6 +6 +Connector_JST +JST_VH_B6P-VH-FB-B_1x06_P3.96mm_Vertical +JST VH series connector, B6P-VH-FB-B, shrouded (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator +connector JST VH side entry +0 +6 +6 +Connector_JST +JST_VH_B6P-VH_1x06_P3.96mm_Vertical +JST VH series connector, B6P-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator +connector JST VH vertical +0 +6 +6 +Connector_JST +JST_VH_B6PS-VH_1x06_P3.96mm_Horizontal +JST VH series connector, B6PS-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator +connector JST VH top entry +0 +6 +6 +Connector_JST +JST_VH_B7P-VH-B_1x07_P3.96mm_Vertical +JST VH PBT series connector, B7P-VH-B (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator +connector JST VH vertical +0 +7 +7 +Connector_JST +JST_VH_B7P-VH-FB-B_1x07_P3.96mm_Vertical +JST VH series connector, B7P-VH-FB-B, shrouded (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator +connector JST VH side entry +0 +7 +7 +Connector_JST +JST_VH_B7P-VH_1x07_P3.96mm_Vertical +JST VH series connector, B7P-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator +connector JST VH vertical +0 +7 +7 +Connector_JST +JST_VH_B7PS-VH_1x07_P3.96mm_Horizontal +JST VH series connector, B7PS-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator +connector JST VH top entry +0 +7 +7 +Connector_JST +JST_VH_B8P-VH-B_1x08_P3.96mm_Vertical +JST VH PBT series connector, B8P-VH-B (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator +connector JST VH vertical +0 +8 +8 +Connector_JST +JST_VH_B8P-VH-FB-B_1x08_P3.96mm_Vertical +JST VH series connector, B8P-VH-FB-B, shrouded (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator +connector JST VH side entry +0 +8 +8 +Connector_JST +JST_VH_B8P-VH_1x08_P3.96mm_Vertical +JST VH series connector, B8P-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator +connector JST VH vertical +0 +8 +8 +Connector_JST +JST_VH_B8PS-VH_1x08_P3.96mm_Horizontal +JST VH series connector, B8PS-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator +connector JST VH top entry +0 +8 +8 +Connector_JST +JST_VH_B9P-VH-B_1x09_P3.96mm_Vertical +JST VH PBT series connector, B9P-VH-B (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator +connector JST VH vertical +0 +9 +9 +Connector_JST +JST_VH_B9P-VH-FB-B_1x09_P3.96mm_Vertical +JST VH series connector, B9P-VH-FB-B, shrouded (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator +connector JST VH side entry +0 +9 +9 +Connector_JST +JST_VH_B9P-VH_1x09_P3.96mm_Vertical +JST VH series connector, B9P-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator +connector JST VH vertical +0 +9 +9 +Connector_JST +JST_VH_B9PS-VH_1x09_P3.96mm_Horizontal +JST VH series connector, B9PS-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator +connector JST VH top entry +0 +9 +9 +Connector_JST +JST_VH_B10P-VH-B_1x10_P3.96mm_Vertical +JST VH PBT series connector, B10P-VH-B (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator +connector JST VH vertical +0 +10 +10 +Connector_JST +JST_VH_B10P-VH-FB-B_1x10_P3.96mm_Vertical +JST VH series connector, B10P-VH-FB-B, shrouded (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator +connector JST VH side entry +0 +10 +10 +Connector_JST +JST_VH_B10P-VH_1x10_P3.96mm_Vertical +JST VH series connector, B10P-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator +connector JST VH vertical +0 +10 +10 +Connector_JST +JST_VH_B10PS-VH_1x10_P3.96mm_Horizontal +JST VH series connector, B10PS-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator +connector JST VH top entry +0 +10 +10 +Connector_JST +JST_VH_B11P-VH-B_1x11_P3.96mm_Vertical +JST VH PBT series connector, B11P-VH-B (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator +connector JST VH vertical +0 +11 +11 +Connector_JST +JST_VH_S2P-VH_1x02_P3.96mm_Horizontal +JST VH series connector, S2P-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator +connector JST VH top entry +0 +2 +2 +Connector_JST +JST_VH_S3P-VH_1x03_P3.96mm_Horizontal +JST VH series connector, S3P-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator +connector JST VH top entry +0 +3 +3 +Connector_JST +JST_VH_S4P-VH_1x04_P3.96mm_Horizontal +JST VH series connector, S4P-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator +connector JST VH top entry +0 +4 +4 +Connector_JST +JST_VH_S5P-VH_1x05_P3.96mm_Horizontal +JST VH series connector, S5P-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator +connector JST VH top entry +0 +5 +5 +Connector_JST +JST_VH_S6P-VH_1x06_P3.96mm_Horizontal +JST VH series connector, S6P-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator +connector JST VH top entry +0 +6 +6 +Connector_JST +JST_VH_S7P-VH_1x07_P3.96mm_Horizontal +JST VH series connector, S7P-VH (http://www.jst-mfg.com/product/pdf/eng/eVH.pdf), generated with kicad-footprint-generator +connector JST VH top entry +0 +7 +7 +Connector_JST +JST_XAG_SM05B-XAGKS-BN-TB_1x05-1MP_P2.50mm_Horizontal +JST XAG series connector, SM05B-XAGKS-BN-TB (http://www.jst-mfg.com/product/pdf/eng/eXAG.pdf), generated with kicad-footprint-generator +connector JST XAG top entry +0 +7 +6 +Connector_JST +JST_XA_B02B-XASK-1-A_1x02_P2.50mm_Vertical +JST XA series connector, B02B-XASK-1-A (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA vertical boss +0 +2 +2 +Connector_JST +JST_XA_B02B-XASK-1_1x02_P2.50mm_Vertical +JST XA series connector, B02B-XASK-1 (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA vertical +0 +2 +2 +Connector_JST +JST_XA_B03B-XASK-1-A_1x03_P2.50mm_Vertical +JST XA series connector, B03B-XASK-1-A (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA vertical boss +0 +3 +3 +Connector_JST +JST_XA_B03B-XASK-1_1x03_P2.50mm_Vertical +JST XA series connector, B03B-XASK-1 (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA vertical +0 +3 +3 +Connector_JST +JST_XA_B04B-XASK-1-A_1x04_P2.50mm_Vertical +JST XA series connector, B04B-XASK-1-A (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA vertical boss +0 +4 +4 +Connector_JST +JST_XA_B04B-XASK-1_1x04_P2.50mm_Vertical +JST XA series connector, B04B-XASK-1 (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA vertical +0 +4 +4 +Connector_JST +JST_XA_B05B-XASK-1-A_1x05_P2.50mm_Vertical +JST XA series connector, B05B-XASK-1-A (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA vertical boss +0 +5 +5 +Connector_JST +JST_XA_B05B-XASK-1_1x05_P2.50mm_Vertical +JST XA series connector, B05B-XASK-1 (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA vertical +0 +5 +5 +Connector_JST +JST_XA_B06B-XASK-1-A_1x06_P2.50mm_Vertical +JST XA series connector, B06B-XASK-1-A (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA vertical boss +0 +6 +6 +Connector_JST +JST_XA_B06B-XASK-1_1x06_P2.50mm_Vertical +JST XA series connector, B06B-XASK-1 (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA vertical +0 +6 +6 +Connector_JST +JST_XA_B07B-XASK-1-A_1x07_P2.50mm_Vertical +JST XA series connector, B07B-XASK-1-A (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA vertical boss +0 +7 +7 +Connector_JST +JST_XA_B07B-XASK-1_1x07_P2.50mm_Vertical +JST XA series connector, B07B-XASK-1 (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA vertical +0 +7 +7 +Connector_JST +JST_XA_B08B-XASK-1-A_1x08_P2.50mm_Vertical +JST XA series connector, B08B-XASK-1-A (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA vertical boss +0 +8 +8 +Connector_JST +JST_XA_B08B-XASK-1_1x08_P2.50mm_Vertical +JST XA series connector, B08B-XASK-1 (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA vertical +0 +8 +8 +Connector_JST +JST_XA_B09B-XASK-1-A_1x09_P2.50mm_Vertical +JST XA series connector, B09B-XASK-1-A (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA vertical boss +0 +9 +9 +Connector_JST +JST_XA_B09B-XASK-1_1x09_P2.50mm_Vertical +JST XA series connector, B09B-XASK-1 (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA vertical +0 +9 +9 +Connector_JST +JST_XA_B10B-XASK-1-A_1x10_P2.50mm_Vertical +JST XA series connector, B10B-XASK-1-A (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA vertical boss +0 +10 +10 +Connector_JST +JST_XA_B10B-XASK-1_1x10_P2.50mm_Vertical +JST XA series connector, B10B-XASK-1 (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA vertical +0 +10 +10 +Connector_JST +JST_XA_B11B-XASK-1-A_1x11_P2.50mm_Vertical +JST XA series connector, B11B-XASK-1-A (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA vertical boss +0 +11 +11 +Connector_JST +JST_XA_B11B-XASK-1_1x11_P2.50mm_Vertical +JST XA series connector, B11B-XASK-1 (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA vertical +0 +11 +11 +Connector_JST +JST_XA_B12B-XASK-1-A_1x12_P2.50mm_Vertical +JST XA series connector, B12B-XASK-1-A (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA vertical boss +0 +12 +12 +Connector_JST +JST_XA_B12B-XASK-1_1x12_P2.50mm_Vertical +JST XA series connector, B12B-XASK-1 (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA vertical +0 +12 +12 +Connector_JST +JST_XA_B13B-XASK-1-A_1x13_P2.50mm_Vertical +JST XA series connector, B13B-XASK-1-A (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA vertical boss +0 +13 +13 +Connector_JST +JST_XA_B13B-XASK-1_1x13_P2.50mm_Vertical +JST XA series connector, B13B-XASK-1 (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA vertical +0 +13 +13 +Connector_JST +JST_XA_B14B-XASK-1-A_1x14_P2.50mm_Vertical +JST XA series connector, B14B-XASK-1-A (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA vertical boss +0 +14 +14 +Connector_JST +JST_XA_B14B-XASK-1_1x14_P2.50mm_Vertical +JST XA series connector, B14B-XASK-1 (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA vertical +0 +14 +14 +Connector_JST +JST_XA_B15B-XASK-1-A_1x15_P2.50mm_Vertical +JST XA series connector, B15B-XASK-1-A (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA vertical boss +0 +15 +15 +Connector_JST +JST_XA_B15B-XASK-1_1x15_P2.50mm_Vertical +JST XA series connector, B15B-XASK-1 (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA vertical +0 +15 +15 +Connector_JST +JST_XA_B18B-XASK-1_1x18_P2.50mm_Vertical +JST XA series connector, B18B-XASK-1 (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA vertical +0 +18 +18 +Connector_JST +JST_XA_B20B-XASK-1-A_1x20_P2.50mm_Vertical +JST XA series connector, B20B-XASK-1-A (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA vertical boss +0 +20 +20 +Connector_JST +JST_XA_B20B-XASK-1_1x20_P2.50mm_Vertical +JST XA series connector, B20B-XASK-1 (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA vertical +0 +20 +20 +Connector_JST +JST_XA_S02B-XASK-1N-BN_1x02_P2.50mm_Horizontal +JST XA series connector, S02B-XASK-1N-BN (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA horizontal +0 +2 +2 +Connector_JST +JST_XA_S02B-XASK-1_1x02_P2.50mm_Horizontal +JST XA series connector, S02B-XASK-1 (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA horizontal hook +0 +2 +2 +Connector_JST +JST_XA_S03B-XASK-1N-BN_1x03_P2.50mm_Horizontal +JST XA series connector, S03B-XASK-1N-BN (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA horizontal +0 +3 +3 +Connector_JST +JST_XA_S03B-XASK-1_1x03_P2.50mm_Horizontal +JST XA series connector, S03B-XASK-1 (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA horizontal hook +0 +3 +3 +Connector_JST +JST_XA_S04B-XASK-1N-BN_1x04_P2.50mm_Horizontal +JST XA series connector, S04B-XASK-1N-BN (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA horizontal +0 +4 +4 +Connector_JST +JST_XA_S04B-XASK-1_1x04_P2.50mm_Horizontal +JST XA series connector, S04B-XASK-1 (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA horizontal hook +0 +4 +4 +Connector_JST +JST_XA_S05B-XASK-1N-BN_1x05_P2.50mm_Horizontal +JST XA series connector, S05B-XASK-1N-BN (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA horizontal +0 +5 +5 +Connector_JST +JST_XA_S05B-XASK-1_1x05_P2.50mm_Horizontal +JST XA series connector, S05B-XASK-1 (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA horizontal hook +0 +5 +5 +Connector_JST +JST_XA_S06B-XASK-1N-BN_1x06_P2.50mm_Horizontal +JST XA series connector, S06B-XASK-1N-BN (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA horizontal +0 +6 +6 +Connector_JST +JST_XA_S06B-XASK-1_1x06_P2.50mm_Horizontal +JST XA series connector, S06B-XASK-1 (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA horizontal hook +0 +6 +6 +Connector_JST +JST_XA_S07B-XASK-1N-BN_1x07_P2.50mm_Horizontal +JST XA series connector, S07B-XASK-1N-BN (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA horizontal +0 +7 +7 +Connector_JST +JST_XA_S07B-XASK-1_1x07_P2.50mm_Horizontal +JST XA series connector, S07B-XASK-1 (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA horizontal hook +0 +7 +7 +Connector_JST +JST_XA_S08B-XASK-1N-BN_1x08_P2.50mm_Horizontal +JST XA series connector, S08B-XASK-1N-BN (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA horizontal +0 +8 +8 +Connector_JST +JST_XA_S08B-XASK-1_1x08_P2.50mm_Horizontal +JST XA series connector, S08B-XASK-1 (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA horizontal hook +0 +8 +8 +Connector_JST +JST_XA_S09B-XASK-1N-BN_1x09_P2.50mm_Horizontal +JST XA series connector, S09B-XASK-1N-BN (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA horizontal +0 +9 +9 +Connector_JST +JST_XA_S09B-XASK-1_1x09_P2.50mm_Horizontal +JST XA series connector, S09B-XASK-1 (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA horizontal hook +0 +9 +9 +Connector_JST +JST_XA_S10B-XASK-1N-BN_1x10_P2.50mm_Horizontal +JST XA series connector, S10B-XASK-1N-BN (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA horizontal +0 +10 +10 +Connector_JST +JST_XA_S10B-XASK-1_1x10_P2.50mm_Horizontal +JST XA series connector, S10B-XASK-1 (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA horizontal hook +0 +10 +10 +Connector_JST +JST_XA_S11B-XASK-1N-BN_1x11_P2.50mm_Horizontal +JST XA series connector, S11B-XASK-1N-BN (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA horizontal +0 +11 +11 +Connector_JST +JST_XA_S11B-XASK-1_1x11_P2.50mm_Horizontal +JST XA series connector, S11B-XASK-1 (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA horizontal hook +0 +11 +11 +Connector_JST +JST_XA_S12B-XASK-1N-BN_1x12_P2.50mm_Horizontal +JST XA series connector, S12B-XASK-1N-BN (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA horizontal +0 +12 +12 +Connector_JST +JST_XA_S12B-XASK-1_1x12_P2.50mm_Horizontal +JST XA series connector, S12B-XASK-1 (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA horizontal hook +0 +12 +12 +Connector_JST +JST_XA_S13B-XASK-1N-BN_1x13_P2.50mm_Horizontal +JST XA series connector, S13B-XASK-1N-BN (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA horizontal +0 +13 +13 +Connector_JST +JST_XA_S13B-XASK-1_1x13_P2.50mm_Horizontal +JST XA series connector, S13B-XASK-1 (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA horizontal hook +0 +13 +13 +Connector_JST +JST_XA_S14B-XASK-1N-BN_1x14_P2.50mm_Horizontal +JST XA series connector, S14B-XASK-1N-BN (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA horizontal +0 +14 +14 +Connector_JST +JST_XA_S14B-XASK-1_1x14_P2.50mm_Horizontal +JST XA series connector, S14B-XASK-1 (http://www.jst-mfg.com/product/pdf/eng/eXA1.pdf), generated with kicad-footprint-generator +connector JST XA horizontal hook +0 +14 +14 +Connector_JST +JST_XH_B1B-XH-AM_1x01_P2.50mm_Vertical +JST XH series connector, B1B-XH-AM, with boss (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH vertical boss +0 +1 +1 +Connector_JST +JST_XH_B2B-XH-AM_1x02_P2.50mm_Vertical +JST XH series connector, B2B-XH-AM, with boss (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH vertical boss +0 +2 +2 +Connector_JST +JST_XH_B2B-XH-A_1x02_P2.50mm_Vertical +JST XH series connector, B2B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH vertical +0 +2 +2 +Connector_JST +JST_XH_B3B-XH-AM_1x03_P2.50mm_Vertical +JST XH series connector, B3B-XH-AM, with boss (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH vertical boss +0 +3 +3 +Connector_JST +JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical +JST XH series connector, B3B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH vertical +0 +3 +3 +Connector_JST +JST_XH_B4B-XH-AM_1x04_P2.50mm_Vertical +JST XH series connector, B4B-XH-AM, with boss (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH vertical boss +0 +4 +4 +Connector_JST +JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical +JST XH series connector, B4B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH vertical +0 +4 +4 +Connector_JST +JST_XH_B5B-XH-AM_1x05_P2.50mm_Vertical +JST XH series connector, B5B-XH-AM, with boss (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH vertical boss +0 +5 +5 +Connector_JST +JST_XH_B5B-XH-A_1x05_P2.50mm_Vertical +JST XH series connector, B5B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH vertical +0 +5 +5 +Connector_JST +JST_XH_B6B-XH-AM_1x06_P2.50mm_Vertical +JST XH series connector, B6B-XH-AM, with boss (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH vertical boss +0 +6 +6 +Connector_JST +JST_XH_B6B-XH-A_1x06_P2.50mm_Vertical +JST XH series connector, B6B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH vertical +0 +6 +6 +Connector_JST +JST_XH_B7B-XH-AM_1x07_P2.50mm_Vertical +JST XH series connector, B7B-XH-AM, with boss (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH vertical boss +0 +7 +7 +Connector_JST +JST_XH_B7B-XH-A_1x07_P2.50mm_Vertical +JST XH series connector, B7B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH vertical +0 +7 +7 +Connector_JST +JST_XH_B8B-XH-AM_1x08_P2.50mm_Vertical +JST XH series connector, B8B-XH-AM, with boss (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH vertical boss +0 +8 +8 +Connector_JST +JST_XH_B8B-XH-A_1x08_P2.50mm_Vertical +JST XH series connector, B8B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH vertical +0 +8 +8 +Connector_JST +JST_XH_B9B-XH-AM_1x09_P2.50mm_Vertical +JST XH series connector, B9B-XH-AM, with boss (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH vertical boss +0 +9 +9 +Connector_JST +JST_XH_B9B-XH-A_1x09_P2.50mm_Vertical +JST XH series connector, B9B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH vertical +0 +9 +9 +Connector_JST +JST_XH_B10B-XH-AM_1x10_P2.50mm_Vertical +JST XH series connector, B10B-XH-AM, with boss (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH side entry boss +0 +10 +10 +Connector_JST +JST_XH_B10B-XH-A_1x10_P2.50mm_Vertical +JST XH series connector, B10B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH side entry +0 +10 +10 +Connector_JST +JST_XH_B11B-XH-A_1x11_P2.50mm_Vertical +JST XH series connector, B11B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH side entry +0 +11 +11 +Connector_JST +JST_XH_B12B-XH-AM_1x12_P2.50mm_Vertical +JST XH series connector, B12B-XH-AM, with boss (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH side entry boss +0 +12 +12 +Connector_JST +JST_XH_B12B-XH-A_1x12_P2.50mm_Vertical +JST XH series connector, B12B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH side entry +0 +12 +12 +Connector_JST +JST_XH_B13B-XH-A_1x13_P2.50mm_Vertical +JST XH series connector, B13B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH side entry +0 +13 +13 +Connector_JST +JST_XH_B14B-XH-A_1x14_P2.50mm_Vertical +JST XH series connector, B14B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH side entry +0 +14 +14 +Connector_JST +JST_XH_B15B-XH-A_1x15_P2.50mm_Vertical +JST XH series connector, B15B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH side entry +0 +15 +15 +Connector_JST +JST_XH_B16B-XH-A_1x16_P2.50mm_Vertical +JST XH series connector, B16B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH side entry +0 +16 +16 +Connector_JST +JST_XH_B20B-XH-A_1x20_P2.50mm_Vertical +JST XH series connector, B20B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH side entry +0 +20 +20 +Connector_JST +JST_XH_S2B-XH-A-1_1x02_P2.50mm_Horizontal +JST XH series connector, S2B-XH-A-1 (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH horizontal +0 +2 +2 +Connector_JST +JST_XH_S2B-XH-A_1x02_P2.50mm_Horizontal +JST XH series connector, S2B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH horizontal +0 +2 +2 +Connector_JST +JST_XH_S3B-XH-A-1_1x03_P2.50mm_Horizontal +JST XH series connector, S3B-XH-A-1 (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH horizontal +0 +3 +3 +Connector_JST +JST_XH_S3B-XH-A_1x03_P2.50mm_Horizontal +JST XH series connector, S3B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH horizontal +0 +3 +3 +Connector_JST +JST_XH_S4B-XH-A-1_1x04_P2.50mm_Horizontal +JST XH series connector, S4B-XH-A-1 (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH horizontal +0 +4 +4 +Connector_JST +JST_XH_S4B-XH-A_1x04_P2.50mm_Horizontal +JST XH series connector, S4B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH horizontal +0 +4 +4 +Connector_JST +JST_XH_S5B-XH-A-1_1x05_P2.50mm_Horizontal +JST XH series connector, S5B-XH-A-1 (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH horizontal +0 +5 +5 +Connector_JST +JST_XH_S5B-XH-A_1x05_P2.50mm_Horizontal +JST XH series connector, S5B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH horizontal +0 +5 +5 +Connector_JST +JST_XH_S6B-XH-A-1_1x06_P2.50mm_Horizontal +JST XH series connector, S6B-XH-A-1 (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH horizontal +0 +6 +6 +Connector_JST +JST_XH_S6B-XH-A_1x06_P2.50mm_Horizontal +JST XH series connector, S6B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH horizontal +0 +6 +6 +Connector_JST +JST_XH_S7B-XH-A-1_1x07_P2.50mm_Horizontal +JST XH series connector, S7B-XH-A-1 (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH horizontal +0 +7 +7 +Connector_JST +JST_XH_S7B-XH-A_1x07_P2.50mm_Horizontal +JST XH series connector, S7B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH horizontal +0 +7 +7 +Connector_JST +JST_XH_S8B-XH-A-1_1x08_P2.50mm_Horizontal +JST XH series connector, S8B-XH-A-1 (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH horizontal +0 +8 +8 +Connector_JST +JST_XH_S8B-XH-A_1x08_P2.50mm_Horizontal +JST XH series connector, S8B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH horizontal +0 +8 +8 +Connector_JST +JST_XH_S9B-XH-A-1_1x09_P2.50mm_Horizontal +JST XH series connector, S9B-XH-A-1 (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH horizontal +0 +9 +9 +Connector_JST +JST_XH_S9B-XH-A_1x09_P2.50mm_Horizontal +JST XH series connector, S9B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH horizontal +0 +9 +9 +Connector_JST +JST_XH_S10B-XH-A-1_1x10_P2.50mm_Horizontal +JST XH series connector, S10B-XH-A-1 (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH top entry +0 +10 +10 +Connector_JST +JST_XH_S10B-XH-A_1x10_P2.50mm_Horizontal +JST XH series connector, S10B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH top entry +0 +10 +10 +Connector_JST +JST_XH_S11B-XH-A-1_1x11_P2.50mm_Horizontal +JST XH series connector, S11B-XH-A-1 (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH top entry +0 +11 +11 +Connector_JST +JST_XH_S11B-XH-A_1x11_P2.50mm_Horizontal +JST XH series connector, S11B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH top entry +0 +11 +11 +Connector_JST +JST_XH_S12B-XH-A-1_1x12_P2.50mm_Horizontal +JST XH series connector, S12B-XH-A-1 (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH top entry +0 +12 +12 +Connector_JST +JST_XH_S12B-XH-A_1x12_P2.50mm_Horizontal +JST XH series connector, S12B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH top entry +0 +12 +12 +Connector_JST +JST_XH_S13B-XH-A-1_1x13_P2.50mm_Horizontal +JST XH series connector, S13B-XH-A-1 (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH top entry +0 +13 +13 +Connector_JST +JST_XH_S13B-XH-A_1x13_P2.50mm_Horizontal +JST XH series connector, S13B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH top entry +0 +13 +13 +Connector_JST +JST_XH_S14B-XH-A-1_1x14_P2.50mm_Horizontal +JST XH series connector, S14B-XH-A-1 (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH top entry +0 +14 +14 +Connector_JST +JST_XH_S14B-XH-A_1x14_P2.50mm_Horizontal +JST XH series connector, S14B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH top entry +0 +14 +14 +Connector_JST +JST_XH_S15B-XH-A-1_1x15_P2.50mm_Horizontal +JST XH series connector, S15B-XH-A-1 (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH top entry +0 +15 +15 +Connector_JST +JST_XH_S15B-XH-A_1x15_P2.50mm_Horizontal +JST XH series connector, S15B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH top entry +0 +15 +15 +Connector_JST +JST_XH_S16B-XH-A_1x16_P2.50mm_Horizontal +JST XH series connector, S16B-XH-A (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator +connector JST XH top entry +0 +16 +16 +Connector_JST +JST_ZE_B02B-ZESK-1D_1x02_P1.50mm_Vertical +JST ZE series connector, B02B-ZESK-1D, with boss (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE side entry boss +0 +2 +2 +Connector_JST +JST_ZE_B03B-ZESK-1D_1x03_P1.50mm_Vertical +JST ZE series connector, B03B-ZESK-1D, with boss (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE side entry boss +0 +3 +3 +Connector_JST +JST_ZE_B03B-ZESK-D_1x03_P1.50mm_Vertical +JST ZE series connector, B03B-ZESK-D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE side entry +0 +3 +3 +Connector_JST +JST_ZE_B04B-ZESK-1D_1x04_P1.50mm_Vertical +JST ZE series connector, B04B-ZESK-1D, with boss (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE side entry boss +0 +4 +4 +Connector_JST +JST_ZE_B04B-ZESK-D_1x04_P1.50mm_Vertical +JST ZE series connector, B04B-ZESK-D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE side entry +0 +4 +4 +Connector_JST +JST_ZE_B05B-ZESK-1D_1x05_P1.50mm_Vertical +JST ZE series connector, B05B-ZESK-1D, with boss (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE side entry boss +0 +5 +5 +Connector_JST +JST_ZE_B05B-ZESK-D_1x05_P1.50mm_Vertical +JST ZE series connector, B05B-ZESK-D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE side entry +0 +5 +5 +Connector_JST +JST_ZE_B06B-ZESK-1D_1x06_P1.50mm_Vertical +JST ZE series connector, B06B-ZESK-1D, with boss (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE side entry boss +0 +6 +6 +Connector_JST +JST_ZE_B06B-ZESK-D_1x06_P1.50mm_Vertical +JST ZE series connector, B06B-ZESK-D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE side entry +0 +6 +6 +Connector_JST +JST_ZE_B07B-ZESK-1D_1x07_P1.50mm_Vertical +JST ZE series connector, B07B-ZESK-1D, with boss (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE side entry boss +0 +7 +7 +Connector_JST +JST_ZE_B07B-ZESK-D_1x07_P1.50mm_Vertical +JST ZE series connector, B07B-ZESK-D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE side entry +0 +7 +7 +Connector_JST +JST_ZE_B08B-ZESK-1D_1x08_P1.50mm_Vertical +JST ZE series connector, B08B-ZESK-1D, with boss (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE side entry boss +0 +8 +8 +Connector_JST +JST_ZE_B08B-ZESK-D_1x08_P1.50mm_Vertical +JST ZE series connector, B08B-ZESK-D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE side entry +0 +8 +8 +Connector_JST +JST_ZE_B09B-ZESK-1D_1x09_P1.50mm_Vertical +JST ZE series connector, B09B-ZESK-1D, with boss (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE side entry boss +0 +9 +9 +Connector_JST +JST_ZE_B09B-ZESK-D_1x09_P1.50mm_Vertical +JST ZE series connector, B09B-ZESK-D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE side entry +0 +9 +9 +Connector_JST +JST_ZE_B10B-ZESK-1D_1x10_P1.50mm_Vertical +JST ZE series connector, B10B-ZESK-1D, with boss (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE side entry boss +0 +10 +10 +Connector_JST +JST_ZE_B10B-ZESK-D_1x10_P1.50mm_Vertical +JST ZE series connector, B10B-ZESK-D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE side entry +0 +10 +10 +Connector_JST +JST_ZE_B11B-ZESK-1D_1x11_P1.50mm_Vertical +JST ZE series connector, B11B-ZESK-1D, with boss (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE side entry boss +0 +11 +11 +Connector_JST +JST_ZE_B11B-ZESK-D_1x11_P1.50mm_Vertical +JST ZE series connector, B11B-ZESK-D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE side entry +0 +11 +11 +Connector_JST +JST_ZE_B12B-ZESK-1D_1x12_P1.50mm_Vertical +JST ZE series connector, B12B-ZESK-1D, with boss (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE side entry boss +0 +12 +12 +Connector_JST +JST_ZE_B12B-ZESK-D_1x12_P1.50mm_Vertical +JST ZE series connector, B12B-ZESK-D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE side entry +0 +12 +12 +Connector_JST +JST_ZE_B13B-ZESK-1D_1x13_P1.50mm_Vertical +JST ZE series connector, B13B-ZESK-1D, with boss (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE side entry boss +0 +13 +13 +Connector_JST +JST_ZE_B13B-ZESK-D_1x13_P1.50mm_Vertical +JST ZE series connector, B13B-ZESK-D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE side entry +0 +13 +13 +Connector_JST +JST_ZE_B14B-ZESK-1D_1x14_P1.50mm_Vertical +JST ZE series connector, B14B-ZESK-1D, with boss (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE side entry boss +0 +14 +14 +Connector_JST +JST_ZE_B14B-ZESK-D_1x14_P1.50mm_Vertical +JST ZE series connector, B14B-ZESK-D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE side entry +0 +14 +14 +Connector_JST +JST_ZE_B15B-ZESK-1D_1x15_P1.50mm_Vertical +JST ZE series connector, B15B-ZESK-1D, with boss (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE side entry boss +0 +15 +15 +Connector_JST +JST_ZE_B15B-ZESK-D_1x15_P1.50mm_Vertical +JST ZE series connector, B15B-ZESK-D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE side entry +0 +15 +15 +Connector_JST +JST_ZE_B16B-ZESK-1D_1x16_P1.50mm_Vertical +JST ZE series connector, B16B-ZESK-1D, with boss (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE side entry boss +0 +16 +16 +Connector_JST +JST_ZE_B16B-ZESK-D_1x16_P1.50mm_Vertical +JST ZE series connector, B16B-ZESK-D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE side entry +0 +16 +16 +Connector_JST +JST_ZE_BM02B-ZESS-TBT_1x02-1MP_P1.50mm_Vertical +JST ZE series connector, BM02B-ZESS-TBT (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE vertical +0 +4 +3 +Connector_JST +JST_ZE_BM03B-ZESS-TBT_1x03-1MP_P1.50mm_Vertical +JST ZE series connector, BM03B-ZESS-TBT (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE vertical +0 +5 +4 +Connector_JST +JST_ZE_BM04B-ZESS-TBT_1x04-1MP_P1.50mm_Vertical +JST ZE series connector, BM04B-ZESS-TBT (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE vertical +0 +6 +5 +Connector_JST +JST_ZE_BM05B-ZESS-TBT_1x05-1MP_P1.50mm_Vertical +JST ZE series connector, BM05B-ZESS-TBT (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE vertical +0 +7 +6 +Connector_JST +JST_ZE_BM06B-ZESS-TBT_1x06-1MP_P1.50mm_Vertical +JST ZE series connector, BM06B-ZESS-TBT (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE vertical +0 +8 +7 +Connector_JST +JST_ZE_BM07B-ZESS-TBT_1x07-1MP_P1.50mm_Vertical +JST ZE series connector, BM07B-ZESS-TBT (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE vertical +0 +9 +8 +Connector_JST +JST_ZE_BM08B-ZESS-TBT_1x08-1MP_P1.50mm_Vertical +JST ZE series connector, BM08B-ZESS-TBT (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE vertical +0 +10 +9 +Connector_JST +JST_ZE_BM09B-ZESS-TBT_1x09-1MP_P1.50mm_Vertical +JST ZE series connector, BM09B-ZESS-TBT (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE vertical +0 +11 +10 +Connector_JST +JST_ZE_BM10B-ZESS-TBT_1x10-1MP_P1.50mm_Vertical +JST ZE series connector, BM10B-ZESS-TBT (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE vertical +0 +12 +11 +Connector_JST +JST_ZE_BM11B-ZESS-TBT_1x11-1MP_P1.50mm_Vertical +JST ZE series connector, BM11B-ZESS-TBT (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE vertical +0 +13 +12 +Connector_JST +JST_ZE_BM12B-ZESS-TBT_1x12-1MP_P1.50mm_Vertical +JST ZE series connector, BM12B-ZESS-TBT (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE vertical +0 +14 +13 +Connector_JST +JST_ZE_BM13B-ZESS-TBT_1x13-1MP_P1.50mm_Vertical +JST ZE series connector, BM13B-ZESS-TBT (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE vertical +0 +15 +14 +Connector_JST +JST_ZE_BM14B-ZESS-TBT_1x14-1MP_P1.50mm_Vertical +JST ZE series connector, BM14B-ZESS-TBT (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE vertical +0 +16 +15 +Connector_JST +JST_ZE_BM15B-ZESS-TBT_1x15-1MP_P1.50mm_Vertical +JST ZE series connector, BM15B-ZESS-TBT (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE vertical +0 +17 +16 +Connector_JST +JST_ZE_BM16B-ZESS-TBT_1x16-1MP_P1.50mm_Vertical +JST ZE series connector, BM16B-ZESS-TBT (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE vertical +0 +18 +17 +Connector_JST +JST_ZE_S02B-ZESK-2D_1x02_P1.50mm_Horizontal +JST ZE series connector, S02B-ZESK-2D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE top entry +0 +2 +2 +Connector_JST +JST_ZE_S03B-ZESK-2D_1x03_P1.50mm_Horizontal +JST ZE series connector, S03B-ZESK-2D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE top entry +0 +3 +3 +Connector_JST +JST_ZE_S04B-ZESK-2D_1x04_P1.50mm_Horizontal +JST ZE series connector, S04B-ZESK-2D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE top entry +0 +4 +4 +Connector_JST +JST_ZE_S05B-ZESK-2D_1x05_P1.50mm_Horizontal +JST ZE series connector, S05B-ZESK-2D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE top entry +0 +5 +5 +Connector_JST +JST_ZE_S06B-ZESK-2D_1x06_P1.50mm_Horizontal +JST ZE series connector, S06B-ZESK-2D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE top entry +0 +6 +6 +Connector_JST +JST_ZE_S07B-ZESK-2D_1x07_P1.50mm_Horizontal +JST ZE series connector, S07B-ZESK-2D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE top entry +0 +7 +7 +Connector_JST +JST_ZE_S08B-ZESK-2D_1x08_P1.50mm_Horizontal +JST ZE series connector, S08B-ZESK-2D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE top entry +0 +8 +8 +Connector_JST +JST_ZE_S09B-ZESK-2D_1x09_P1.50mm_Horizontal +JST ZE series connector, S09B-ZESK-2D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE top entry +0 +9 +9 +Connector_JST +JST_ZE_S10B-ZESK-2D_1x10_P1.50mm_Horizontal +JST ZE series connector, S10B-ZESK-2D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE top entry +0 +10 +10 +Connector_JST +JST_ZE_S11B-ZESK-2D_1x11_P1.50mm_Horizontal +JST ZE series connector, S11B-ZESK-2D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE top entry +0 +11 +11 +Connector_JST +JST_ZE_S12B-ZESK-2D_1x12_P1.50mm_Horizontal +JST ZE series connector, S12B-ZESK-2D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE top entry +0 +12 +12 +Connector_JST +JST_ZE_S13B-ZESK-2D_1x13_P1.50mm_Horizontal +JST ZE series connector, S13B-ZESK-2D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE top entry +0 +13 +13 +Connector_JST +JST_ZE_S14B-ZESK-2D_1x14_P1.50mm_Horizontal +JST ZE series connector, S14B-ZESK-2D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE top entry +0 +14 +14 +Connector_JST +JST_ZE_S15B-ZESK-2D_1x15_P1.50mm_Horizontal +JST ZE series connector, S15B-ZESK-2D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE top entry +0 +15 +15 +Connector_JST +JST_ZE_S16B-ZESK-2D_1x16_P1.50mm_Horizontal +JST ZE series connector, S16B-ZESK-2D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE top entry +0 +16 +16 +Connector_JST +JST_ZE_SM02B-ZESS-TB_1x02-1MP_P1.50mm_Horizontal +JST ZE series connector, SM02B-ZESS-TB (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE horizontal +0 +4 +3 +Connector_JST +JST_ZE_SM03B-ZESS-TB_1x03-1MP_P1.50mm_Horizontal +JST ZE series connector, SM03B-ZESS-TB (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE horizontal +0 +5 +4 +Connector_JST +JST_ZE_SM04B-ZESS-TB_1x04-1MP_P1.50mm_Horizontal +JST ZE series connector, SM04B-ZESS-TB (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE horizontal +0 +6 +5 +Connector_JST +JST_ZE_SM05B-ZESS-TB_1x05-1MP_P1.50mm_Horizontal +JST ZE series connector, SM05B-ZESS-TB (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE horizontal +0 +7 +6 +Connector_JST +JST_ZE_SM06B-ZESS-TB_1x06-1MP_P1.50mm_Horizontal +JST ZE series connector, SM06B-ZESS-TB (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE horizontal +0 +8 +7 +Connector_JST +JST_ZE_SM07B-ZESS-TB_1x07-1MP_P1.50mm_Horizontal +JST ZE series connector, SM07B-ZESS-TB (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE horizontal +0 +9 +8 +Connector_JST +JST_ZE_SM08B-ZESS-TB_1x08-1MP_P1.50mm_Horizontal +JST ZE series connector, SM08B-ZESS-TB (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE horizontal +0 +10 +9 +Connector_JST +JST_ZE_SM09B-ZESS-TB_1x09-1MP_P1.50mm_Horizontal +JST ZE series connector, SM09B-ZESS-TB (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE horizontal +0 +11 +10 +Connector_JST +JST_ZE_SM10B-ZESS-TB_1x10-1MP_P1.50mm_Horizontal +JST ZE series connector, SM10B-ZESS-TB (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE horizontal +0 +12 +11 +Connector_JST +JST_ZE_SM11B-ZESS-TB_1x11-1MP_P1.50mm_Horizontal +JST ZE series connector, SM11B-ZESS-TB (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE horizontal +0 +13 +12 +Connector_JST +JST_ZE_SM12B-ZESS-TB_1x12-1MP_P1.50mm_Horizontal +JST ZE series connector, SM12B-ZESS-TB (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE horizontal +0 +14 +13 +Connector_JST +JST_ZE_SM13B-ZESS-TB_1x13-1MP_P1.50mm_Horizontal +JST ZE series connector, SM13B-ZESS-TB (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE horizontal +0 +15 +14 +Connector_JST +JST_ZE_SM14B-ZESS-TB_1x14-1MP_P1.50mm_Horizontal +JST ZE series connector, SM14B-ZESS-TB (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE horizontal +0 +16 +15 +Connector_JST +JST_ZE_SM15B-ZESS-TB_1x15-1MP_P1.50mm_Horizontal +JST ZE series connector, SM15B-ZESS-TB (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE horizontal +0 +17 +16 +Connector_JST +JST_ZE_SM16B-ZESS-TB_1x16-1MP_P1.50mm_Horizontal +JST ZE series connector, SM16B-ZESS-TB (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator +connector JST ZE horizontal +0 +18 +17 +Connector_Molex +Molex_CLIK-Mate_502382-0270_1x02-1MP_P1.25mm_Vertical +Molex CLIK-Mate series connector, 502382-0270 (http://www.molex.com/pdm_docs/sd/5023820270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate side entry +0 +4 +3 +Connector_Molex +Molex_CLIK-Mate_502382-0370_1x03-1MP_P1.25mm_Vertical +Molex CLIK-Mate series connector, 502382-0370 (http://www.molex.com/pdm_docs/sd/5023820270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate side entry +0 +5 +4 +Connector_Molex +Molex_CLIK-Mate_502382-0470_1x04-1MP_P1.25mm_Vertical +Molex CLIK-Mate series connector, 502382-0470 (http://www.molex.com/pdm_docs/sd/5023820270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate side entry +0 +6 +5 +Connector_Molex +Molex_CLIK-Mate_502382-0570_1x05-1MP_P1.25mm_Vertical +Molex CLIK-Mate series connector, 502382-0570 (http://www.molex.com/pdm_docs/sd/5023820270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate side entry +0 +7 +6 +Connector_Molex +Molex_CLIK-Mate_502382-0670_1x06-1MP_P1.25mm_Vertical +Molex CLIK-Mate series connector, 502382-0670 (http://www.molex.com/pdm_docs/sd/5023820270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate side entry +0 +8 +7 +Connector_Molex +Molex_CLIK-Mate_502382-0770_1x07-1MP_P1.25mm_Vertical +Molex CLIK-Mate series connector, 502382-0770 (http://www.molex.com/pdm_docs/sd/5023820270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate side entry +0 +9 +8 +Connector_Molex +Molex_CLIK-Mate_502382-0870_1x08-1MP_P1.25mm_Vertical +Molex CLIK-Mate series connector, 502382-0870 (http://www.molex.com/pdm_docs/sd/5023820270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate side entry +0 +10 +9 +Connector_Molex +Molex_CLIK-Mate_502382-0970_1x09-1MP_P1.25mm_Vertical +Molex CLIK-Mate series connector, 502382-0970 (http://www.molex.com/pdm_docs/sd/5023820270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate side entry +0 +11 +10 +Connector_Molex +Molex_CLIK-Mate_502382-1070_1x10-1MP_P1.25mm_Vertical +Molex CLIK-Mate series connector, 502382-1070 (http://www.molex.com/pdm_docs/sd/5023820270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate side entry +0 +12 +11 +Connector_Molex +Molex_CLIK-Mate_502382-1170_1x11-1MP_P1.25mm_Vertical +Molex CLIK-Mate series connector, 502382-1170 (http://www.molex.com/pdm_docs/sd/5023820270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate side entry +0 +13 +12 +Connector_Molex +Molex_CLIK-Mate_502382-1270_1x12-1MP_P1.25mm_Vertical +Molex CLIK-Mate series connector, 502382-1270 (http://www.molex.com/pdm_docs/sd/5023820270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate side entry +0 +14 +13 +Connector_Molex +Molex_CLIK-Mate_502382-1370_1x13-1MP_P1.25mm_Vertical +Molex CLIK-Mate series connector, 502382-1370 (http://www.molex.com/pdm_docs/sd/5023820270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate side entry +0 +15 +14 +Connector_Molex +Molex_CLIK-Mate_502382-1470_1x14-1MP_P1.25mm_Vertical +Molex CLIK-Mate series connector, 502382-1470 (http://www.molex.com/pdm_docs/sd/5023820270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate side entry +0 +16 +15 +Connector_Molex +Molex_CLIK-Mate_502382-1570_1x15-1MP_P1.25mm_Vertical +Molex CLIK-Mate series connector, 502382-1570 (http://www.molex.com/pdm_docs/sd/5023820270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate side entry +0 +17 +16 +Connector_Molex +Molex_CLIK-Mate_502386-0270_1x02-1MP_P1.25mm_Horizontal +Molex CLIK-Mate series connector, 502386-0270 (http://www.molex.com/pdm_docs/sd/5023860270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate top entry +0 +4 +3 +Connector_Molex +Molex_CLIK-Mate_502386-0370_1x03-1MP_P1.25mm_Horizontal +Molex CLIK-Mate series connector, 502386-0370 (http://www.molex.com/pdm_docs/sd/5023860270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate top entry +0 +5 +4 +Connector_Molex +Molex_CLIK-Mate_502386-0470_1x04-1MP_P1.25mm_Horizontal +Molex CLIK-Mate series connector, 502386-0470 (http://www.molex.com/pdm_docs/sd/5023860270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate top entry +0 +6 +5 +Connector_Molex +Molex_CLIK-Mate_502386-0570_1x05-1MP_P1.25mm_Horizontal +Molex CLIK-Mate series connector, 502386-0570 (http://www.molex.com/pdm_docs/sd/5023860270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate top entry +0 +7 +6 +Connector_Molex +Molex_CLIK-Mate_502386-0670_1x06-1MP_P1.25mm_Horizontal +Molex CLIK-Mate series connector, 502386-0670 (http://www.molex.com/pdm_docs/sd/5023860270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate top entry +0 +8 +7 +Connector_Molex +Molex_CLIK-Mate_502386-0770_1x07-1MP_P1.25mm_Horizontal +Molex CLIK-Mate series connector, 502386-0770 (http://www.molex.com/pdm_docs/sd/5023860270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate top entry +0 +9 +8 +Connector_Molex +Molex_CLIK-Mate_502386-0870_1x08-1MP_P1.25mm_Horizontal +Molex CLIK-Mate series connector, 502386-0870 (http://www.molex.com/pdm_docs/sd/5023860270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate top entry +0 +10 +9 +Connector_Molex +Molex_CLIK-Mate_502386-0970_1x09-1MP_P1.25mm_Horizontal +Molex CLIK-Mate series connector, 502386-0970 (http://www.molex.com/pdm_docs/sd/5023860270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate top entry +0 +11 +10 +Connector_Molex +Molex_CLIK-Mate_502386-1070_1x10-1MP_P1.25mm_Horizontal +Molex CLIK-Mate series connector, 502386-1070 (http://www.molex.com/pdm_docs/sd/5023860270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate top entry +0 +12 +11 +Connector_Molex +Molex_CLIK-Mate_502386-1170_1x11-1MP_P1.25mm_Horizontal +Molex CLIK-Mate series connector, 502386-1170 (http://www.molex.com/pdm_docs/sd/5023860270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate top entry +0 +13 +12 +Connector_Molex +Molex_CLIK-Mate_502386-1270_1x12-1MP_P1.25mm_Horizontal +Molex CLIK-Mate series connector, 502386-1270 (http://www.molex.com/pdm_docs/sd/5023860270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate top entry +0 +14 +13 +Connector_Molex +Molex_CLIK-Mate_502386-1370_1x13-1MP_P1.25mm_Horizontal +Molex CLIK-Mate series connector, 502386-1370 (http://www.molex.com/pdm_docs/sd/5023860270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate top entry +0 +15 +14 +Connector_Molex +Molex_CLIK-Mate_502386-1470_1x14-1MP_P1.25mm_Horizontal +Molex CLIK-Mate series connector, 502386-1470 (http://www.molex.com/pdm_docs/sd/5023860270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate top entry +0 +16 +15 +Connector_Molex +Molex_CLIK-Mate_502386-1570_1x15-1MP_P1.25mm_Horizontal +Molex CLIK-Mate series connector, 502386-1570 (http://www.molex.com/pdm_docs/sd/5023860270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate top entry +0 +17 +16 +Connector_Molex +Molex_CLIK-Mate_502443-0270_1x02-1MP_P2.00mm_Vertical +Molex CLIK-Mate series connector, 502443-0270 (http://www.molex.com/pdm_docs/sd/5024430270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate side entry +0 +4 +3 +Connector_Molex +Molex_CLIK-Mate_502443-0370_1x03-1MP_P2.00mm_Vertical +Molex CLIK-Mate series connector, 502443-0370 (http://www.molex.com/pdm_docs/sd/5024430270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate side entry +0 +5 +4 +Connector_Molex +Molex_CLIK-Mate_502443-0470_1x04-1MP_P2.00mm_Vertical +Molex CLIK-Mate series connector, 502443-0470 (http://www.molex.com/pdm_docs/sd/5024430270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate side entry +0 +6 +5 +Connector_Molex +Molex_CLIK-Mate_502443-0570_1x05-1MP_P2.00mm_Vertical +Molex CLIK-Mate series connector, 502443-0570 (http://www.molex.com/pdm_docs/sd/5024430270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate side entry +0 +7 +6 +Connector_Molex +Molex_CLIK-Mate_502443-0670_1x06-1MP_P2.00mm_Vertical +Molex CLIK-Mate series connector, 502443-0670 (http://www.molex.com/pdm_docs/sd/5024430270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate side entry +0 +8 +7 +Connector_Molex +Molex_CLIK-Mate_502443-0770_1x07-1MP_P2.00mm_Vertical +Molex CLIK-Mate series connector, 502443-0770 (http://www.molex.com/pdm_docs/sd/5024430270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate side entry +0 +9 +8 +Connector_Molex +Molex_CLIK-Mate_502443-0870_1x08-1MP_P2.00mm_Vertical +Molex CLIK-Mate series connector, 502443-0870 (http://www.molex.com/pdm_docs/sd/5024430270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate side entry +0 +10 +9 +Connector_Molex +Molex_CLIK-Mate_502443-0970_1x09-1MP_P2.00mm_Vertical +Molex CLIK-Mate series connector, 502443-0970 (http://www.molex.com/pdm_docs/sd/5024430270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate side entry +0 +11 +10 +Connector_Molex +Molex_CLIK-Mate_502443-1270_1x12-1MP_P2.00mm_Vertical +Molex CLIK-Mate series connector, 502443-1270 (http://www.molex.com/pdm_docs/sd/5024430270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate side entry +0 +14 +13 +Connector_Molex +Molex_CLIK-Mate_502443-1370_1x13-1MP_P2.00mm_Vertical +Molex CLIK-Mate series connector, 502443-1370 (http://www.molex.com/pdm_docs/sd/5024430270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate side entry +0 +15 +14 +Connector_Molex +Molex_CLIK-Mate_502443-1470_1x14-1MP_P2.00mm_Vertical +Molex CLIK-Mate series connector, 502443-1470 (http://www.molex.com/pdm_docs/sd/5024430270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate side entry +0 +16 +15 +Connector_Molex +Molex_CLIK-Mate_502443-1570_1x15-1MP_P2.00mm_Vertical +Molex CLIK-Mate series connector, 502443-1570 (http://www.molex.com/pdm_docs/sd/5024430270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate side entry +0 +17 +16 +Connector_Molex +Molex_CLIK-Mate_502494-0270_1x02-1MP_P2.00mm_Horizontal +Molex CLIK-Mate series connector, 502494-0270 (http://www.molex.com/pdm_docs/sd/5024940270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate top entry +0 +4 +3 +Connector_Molex +Molex_CLIK-Mate_502494-0370_1x03-1MP_P2.00mm_Horizontal +Molex CLIK-Mate series connector, 502494-0370 (http://www.molex.com/pdm_docs/sd/5024940270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate top entry +0 +5 +4 +Connector_Molex +Molex_CLIK-Mate_502494-0470_1x04-1MP_P2.00mm_Horizontal +Molex CLIK-Mate series connector, 502494-0470 (http://www.molex.com/pdm_docs/sd/5024940270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate top entry +0 +6 +5 +Connector_Molex +Molex_CLIK-Mate_502494-0670_1x06-1MP_P2.00mm_Horizontal +Molex CLIK-Mate series connector, 502494-0670 (http://www.molex.com/pdm_docs/sd/5024940270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate top entry +0 +8 +7 +Connector_Molex +Molex_CLIK-Mate_502494-0870_1x08-1MP_P2.00mm_Horizontal +Molex CLIK-Mate series connector, 502494-0870 (http://www.molex.com/pdm_docs/sd/5024940270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate top entry +0 +10 +9 +Connector_Molex +Molex_CLIK-Mate_502494-1070_1x10-1MP_P2.00mm_Horizontal +Molex CLIK-Mate series connector, 502494-1070 (http://www.molex.com/pdm_docs/sd/5024940270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate top entry +0 +12 +11 +Connector_Molex +Molex_CLIK-Mate_502494-1270_1x12-1MP_P2.00mm_Horizontal +Molex CLIK-Mate series connector, 502494-1270 (http://www.molex.com/pdm_docs/sd/5024940270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate top entry +0 +14 +13 +Connector_Molex +Molex_CLIK-Mate_502494-1370_1x13-1MP_P2.00mm_Horizontal +Molex CLIK-Mate series connector, 502494-1370 (http://www.molex.com/pdm_docs/sd/5024940270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate top entry +0 +15 +14 +Connector_Molex +Molex_CLIK-Mate_502494-1470_1x14-1MP_P2.00mm_Horizontal +Molex CLIK-Mate series connector, 502494-1470 (http://www.molex.com/pdm_docs/sd/5024940270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate top entry +0 +16 +15 +Connector_Molex +Molex_CLIK-Mate_502494-1570_1x15-1MP_P2.00mm_Horizontal +Molex CLIK-Mate series connector, 502494-1570 (http://www.molex.com/pdm_docs/sd/5024940270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate top entry +0 +17 +16 +Connector_Molex +Molex_CLIK-Mate_502585-0270_1x02-1MP_P1.50mm_Horizontal +Molex CLIK-Mate series connector, 502585-0270 (http://www.molex.com/pdm_docs/sd/5025850270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate top entry +0 +4 +3 +Connector_Molex +Molex_CLIK-Mate_502585-0370_1x03-1MP_P1.50mm_Horizontal +Molex CLIK-Mate series connector, 502585-0370 (http://www.molex.com/pdm_docs/sd/5025850270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate top entry +0 +5 +4 +Connector_Molex +Molex_CLIK-Mate_502585-0470_1x04-1MP_P1.50mm_Horizontal +Molex CLIK-Mate series connector, 502585-0470 (http://www.molex.com/pdm_docs/sd/5025850270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate top entry +0 +6 +5 +Connector_Molex +Molex_CLIK-Mate_502585-0570_1x05-1MP_P1.50mm_Horizontal +Molex CLIK-Mate series connector, 502585-0570 (http://www.molex.com/pdm_docs/sd/5025850270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate top entry +0 +7 +6 +Connector_Molex +Molex_CLIK-Mate_502585-0670_1x06-1MP_P1.50mm_Horizontal +Molex CLIK-Mate series connector, 502585-0670 (http://www.molex.com/pdm_docs/sd/5025850270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate top entry +0 +8 +7 +Connector_Molex +Molex_CLIK-Mate_502585-0770_1x07-1MP_P1.50mm_Horizontal +Molex CLIK-Mate series connector, 502585-0770 (http://www.molex.com/pdm_docs/sd/5025850270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate top entry +0 +9 +8 +Connector_Molex +Molex_CLIK-Mate_502585-0870_1x08-1MP_P1.50mm_Horizontal +Molex CLIK-Mate series connector, 502585-0870 (http://www.molex.com/pdm_docs/sd/5025850270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate top entry +0 +10 +9 +Connector_Molex +Molex_CLIK-Mate_502585-0970_1x09-1MP_P1.50mm_Horizontal +Molex CLIK-Mate series connector, 502585-0970 (http://www.molex.com/pdm_docs/sd/5025850270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate top entry +0 +11 +10 +Connector_Molex +Molex_CLIK-Mate_502585-1070_1x10-1MP_P1.50mm_Horizontal +Molex CLIK-Mate series connector, 502585-1070 (http://www.molex.com/pdm_docs/sd/5025850270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate top entry +0 +12 +11 +Connector_Molex +Molex_CLIK-Mate_502585-1170_1x11-1MP_P1.50mm_Horizontal +Molex CLIK-Mate series connector, 502585-1170 (http://www.molex.com/pdm_docs/sd/5025850270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate top entry +0 +13 +12 +Connector_Molex +Molex_CLIK-Mate_502585-1270_1x12-1MP_P1.50mm_Horizontal +Molex CLIK-Mate series connector, 502585-1270 (http://www.molex.com/pdm_docs/sd/5025850270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate top entry +0 +14 +13 +Connector_Molex +Molex_CLIK-Mate_502585-1370_1x13-1MP_P1.50mm_Horizontal +Molex CLIK-Mate series connector, 502585-1370 (http://www.molex.com/pdm_docs/sd/5025850270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate top entry +0 +15 +14 +Connector_Molex +Molex_CLIK-Mate_502585-1470_1x14-1MP_P1.50mm_Horizontal +Molex CLIK-Mate series connector, 502585-1470 (http://www.molex.com/pdm_docs/sd/5025850270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate top entry +0 +16 +15 +Connector_Molex +Molex_CLIK-Mate_502585-1570_1x15-1MP_P1.50mm_Horizontal +Molex CLIK-Mate series connector, 502585-1570 (http://www.molex.com/pdm_docs/sd/5025850270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate top entry +0 +17 +16 +Connector_Molex +Molex_CLIK-Mate_505405-0270_1x02-1MP_P1.50mm_Vertical +Molex CLIK-Mate series connector, 505405-0270 (http://www.molex.com/pdm_docs/sd/5054050270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate side entry +0 +4 +3 +Connector_Molex +Molex_CLIK-Mate_505405-0370_1x03-1MP_P1.50mm_Vertical +Molex CLIK-Mate series connector, 505405-0370 (http://www.molex.com/pdm_docs/sd/5054050270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate side entry +0 +5 +4 +Connector_Molex +Molex_CLIK-Mate_505405-0470_1x04-1MP_P1.50mm_Vertical +Molex CLIK-Mate series connector, 505405-0470 (http://www.molex.com/pdm_docs/sd/5054050270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate side entry +0 +6 +5 +Connector_Molex +Molex_CLIK-Mate_505405-0570_1x05-1MP_P1.50mm_Vertical +Molex CLIK-Mate series connector, 505405-0570 (http://www.molex.com/pdm_docs/sd/5054050270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate side entry +0 +7 +6 +Connector_Molex +Molex_CLIK-Mate_505405-0670_1x06-1MP_P1.50mm_Vertical +Molex CLIK-Mate series connector, 505405-0670 (http://www.molex.com/pdm_docs/sd/5054050270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate side entry +0 +8 +7 +Connector_Molex +Molex_CLIK-Mate_505405-0770_1x07-1MP_P1.50mm_Vertical +Molex CLIK-Mate series connector, 505405-0770 (http://www.molex.com/pdm_docs/sd/5054050270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate side entry +0 +9 +8 +Connector_Molex +Molex_CLIK-Mate_505405-0870_1x08-1MP_P1.50mm_Vertical +Molex CLIK-Mate series connector, 505405-0870 (http://www.molex.com/pdm_docs/sd/5054050270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate side entry +0 +10 +9 +Connector_Molex +Molex_CLIK-Mate_505405-0970_1x09-1MP_P1.50mm_Vertical +Molex CLIK-Mate series connector, 505405-0970 (http://www.molex.com/pdm_docs/sd/5054050270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate side entry +0 +11 +10 +Connector_Molex +Molex_CLIK-Mate_505405-1070_1x10-1MP_P1.50mm_Vertical +Molex CLIK-Mate series connector, 505405-1070 (http://www.molex.com/pdm_docs/sd/5054050270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate side entry +0 +12 +11 +Connector_Molex +Molex_CLIK-Mate_505405-1170_1x11-1MP_P1.50mm_Vertical +Molex CLIK-Mate series connector, 505405-1170 (http://www.molex.com/pdm_docs/sd/5054050270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate side entry +0 +13 +12 +Connector_Molex +Molex_CLIK-Mate_505405-1270_1x12-1MP_P1.50mm_Vertical +Molex CLIK-Mate series connector, 505405-1270 (http://www.molex.com/pdm_docs/sd/5054050270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate side entry +0 +14 +13 +Connector_Molex +Molex_CLIK-Mate_505405-1370_1x13-1MP_P1.50mm_Vertical +Molex CLIK-Mate series connector, 505405-1370 (http://www.molex.com/pdm_docs/sd/5054050270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate side entry +0 +15 +14 +Connector_Molex +Molex_CLIK-Mate_505405-1470_1x14-1MP_P1.50mm_Vertical +Molex CLIK-Mate series connector, 505405-1470 (http://www.molex.com/pdm_docs/sd/5054050270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate side entry +0 +16 +15 +Connector_Molex +Molex_CLIK-Mate_505405-1570_1x15-1MP_P1.50mm_Vertical +Molex CLIK-Mate series connector, 505405-1570 (http://www.molex.com/pdm_docs/sd/5054050270_sd.pdf), generated with kicad-footprint-generator +connector Molex CLIK-Mate side entry +0 +17 +16 +Connector_Molex +Molex_KK-254_AE-6410-02A_1x02_P2.54mm_Vertical +Molex KK-254 Interconnect System, old/engineering part number: AE-6410-02A example for new part number: 22-27-2021, 2 Pins (http://www.molex.com/pdm_docs/sd/022272021_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-254 vertical +0 +2 +2 +Connector_Molex +Molex_KK-254_AE-6410-03A_1x03_P2.54mm_Vertical +Molex KK-254 Interconnect System, old/engineering part number: AE-6410-03A example for new part number: 22-27-2031, 3 Pins (http://www.molex.com/pdm_docs/sd/022272021_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-254 vertical +0 +3 +3 +Connector_Molex +Molex_KK-254_AE-6410-04A_1x04_P2.54mm_Vertical +Molex KK-254 Interconnect System, old/engineering part number: AE-6410-04A example for new part number: 22-27-2041, 4 Pins (http://www.molex.com/pdm_docs/sd/022272021_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-254 vertical +0 +4 +4 +Connector_Molex +Molex_KK-254_AE-6410-05A_1x05_P2.54mm_Vertical +Molex KK-254 Interconnect System, old/engineering part number: AE-6410-05A example for new part number: 22-27-2051, 5 Pins (http://www.molex.com/pdm_docs/sd/022272021_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-254 vertical +0 +5 +5 +Connector_Molex +Molex_KK-254_AE-6410-06A_1x06_P2.54mm_Vertical +Molex KK-254 Interconnect System, old/engineering part number: AE-6410-06A example for new part number: 22-27-2061, 6 Pins (http://www.molex.com/pdm_docs/sd/022272021_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-254 vertical +0 +6 +6 +Connector_Molex +Molex_KK-254_AE-6410-07A_1x07_P2.54mm_Vertical +Molex KK-254 Interconnect System, old/engineering part number: AE-6410-07A example for new part number: 22-27-2071, 7 Pins (http://www.molex.com/pdm_docs/sd/022272021_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-254 vertical +0 +7 +7 +Connector_Molex +Molex_KK-254_AE-6410-08A_1x08_P2.54mm_Vertical +Molex KK-254 Interconnect System, old/engineering part number: AE-6410-08A example for new part number: 22-27-2081, 8 Pins (http://www.molex.com/pdm_docs/sd/022272021_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-254 vertical +0 +8 +8 +Connector_Molex +Molex_KK-254_AE-6410-09A_1x09_P2.54mm_Vertical +Molex KK-254 Interconnect System, old/engineering part number: AE-6410-09A example for new part number: 22-27-2091, 9 Pins (http://www.molex.com/pdm_docs/sd/022272021_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-254 vertical +0 +9 +9 +Connector_Molex +Molex_KK-254_AE-6410-10A_1x10_P2.54mm_Vertical +Molex KK-254 Interconnect System, old/engineering part number: AE-6410-10A example for new part number: 22-27-2101, 10 Pins (http://www.molex.com/pdm_docs/sd/022272021_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-254 vertical +0 +10 +10 +Connector_Molex +Molex_KK-254_AE-6410-11A_1x11_P2.54mm_Vertical +Molex KK-254 Interconnect System, old/engineering part number: AE-6410-11A example for new part number: 22-27-2111, 11 Pins (http://www.molex.com/pdm_docs/sd/022272021_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-254 vertical +0 +11 +11 +Connector_Molex +Molex_KK-254_AE-6410-12A_1x12_P2.54mm_Vertical +Molex KK-254 Interconnect System, old/engineering part number: AE-6410-12A example for new part number: 22-27-2121, 12 Pins (http://www.molex.com/pdm_docs/sd/022272021_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-254 vertical +0 +12 +12 +Connector_Molex +Molex_KK-254_AE-6410-13A_1x13_P2.54mm_Vertical +Molex KK-254 Interconnect System, old/engineering part number: AE-6410-13A example for new part number: 22-27-2131, 13 Pins (http://www.molex.com/pdm_docs/sd/022272021_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-254 vertical +0 +13 +13 +Connector_Molex +Molex_KK-254_AE-6410-14A_1x14_P2.54mm_Vertical +Molex KK-254 Interconnect System, old/engineering part number: AE-6410-14A example for new part number: 22-27-2141, 14 Pins (http://www.molex.com/pdm_docs/sd/022272021_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-254 vertical +0 +14 +14 +Connector_Molex +Molex_KK-254_AE-6410-15A_1x15_P2.54mm_Vertical +Molex KK-254 Interconnect System, old/engineering part number: AE-6410-15A example for new part number: 22-27-2151, 15 Pins (http://www.molex.com/pdm_docs/sd/022272021_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-254 vertical +0 +15 +15 +Connector_Molex +Molex_KK-254_AE-6410-16A_1x16_P2.54mm_Vertical +Molex KK-254 Interconnect System, old/engineering part number: AE-6410-16A example for new part number: 22-27-2161, 16 Pins (http://www.molex.com/pdm_docs/sd/022272021_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-254 vertical +0 +16 +16 +Connector_Molex +Molex_KK-396_5273-02A_1x02_P3.96mm_Vertical +Molex KK 396 Interconnect System, old/engineering part number: 5273-02A example for new part number: 09-65-2028, 2 Pins (https://www.molex.com/pdm_docs/sd/009652028_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-396 vertical +0 +2 +2 +Connector_Molex +Molex_KK-396_5273-03A_1x03_P3.96mm_Vertical +Molex KK 396 Interconnect System, old/engineering part number: 5273-03A example for new part number: 09-65-2038, 3 Pins (https://www.molex.com/pdm_docs/sd/009652028_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-396 vertical +0 +3 +3 +Connector_Molex +Molex_KK-396_5273-04A_1x04_P3.96mm_Vertical +Molex KK 396 Interconnect System, old/engineering part number: 5273-04A example for new part number: 09-65-2048, 4 Pins (https://www.molex.com/pdm_docs/sd/009652028_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-396 vertical +0 +4 +4 +Connector_Molex +Molex_KK-396_5273-05A_1x05_P3.96mm_Vertical +Molex KK 396 Interconnect System, old/engineering part number: 5273-05A example for new part number: 09-65-2058, 5 Pins (https://www.molex.com/pdm_docs/sd/009652028_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-396 vertical +0 +5 +5 +Connector_Molex +Molex_KK-396_5273-06A_1x06_P3.96mm_Vertical +Molex KK 396 Interconnect System, old/engineering part number: 5273-06A example for new part number: 09-65-2068, 6 Pins (https://www.molex.com/pdm_docs/sd/009652028_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-396 vertical +0 +6 +6 +Connector_Molex +Molex_KK-396_5273-07A_1x07_P3.96mm_Vertical +Molex KK 396 Interconnect System, old/engineering part number: 5273-07A example for new part number: 09-65-2078, 7 Pins (https://www.molex.com/pdm_docs/sd/009652028_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-396 vertical +0 +7 +7 +Connector_Molex +Molex_KK-396_5273-08A_1x08_P3.96mm_Vertical +Molex KK 396 Interconnect System, old/engineering part number: 5273-08A example for new part number: 09-65-2088, 8 Pins (https://www.molex.com/pdm_docs/sd/009652028_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-396 vertical +0 +8 +8 +Connector_Molex +Molex_KK-396_5273-09A_1x09_P3.96mm_Vertical +Molex KK 396 Interconnect System, old/engineering part number: 5273-09A example for new part number: 09-65-2098, 9 Pins (https://www.molex.com/pdm_docs/sd/009652028_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-396 vertical +0 +9 +9 +Connector_Molex +Molex_KK-396_5273-10A_1x10_P3.96mm_Vertical +Molex KK 396 Interconnect System, old/engineering part number: 5273-10A example for new part number: 09-65-2108, 10 Pins (https://www.molex.com/pdm_docs/sd/009652028_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-396 vertical +0 +10 +10 +Connector_Molex +Molex_KK-396_5273-11A_1x11_P3.96mm_Vertical +Molex KK 396 Interconnect System, old/engineering part number: 5273-11A example for new part number: 09-65-2118, 11 Pins (https://www.molex.com/pdm_docs/sd/009652028_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-396 vertical +0 +11 +11 +Connector_Molex +Molex_KK-396_5273-12A_1x12_P3.96mm_Vertical +Molex KK 396 Interconnect System, old/engineering part number: 5273-12A example for new part number: 09-65-2128, 12 Pins (https://www.molex.com/pdm_docs/sd/009652028_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-396 vertical +0 +12 +12 +Connector_Molex +Molex_KK-396_A-41791-0002_1x02_P3.96mm_Vertical +Molex KK 396 Interconnect System, old/engineering part number: A-41791-0002 example for new part number: 26-60-4020, 2 Pins (https://www.molex.com/pdm_docs/sd/026604020_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-396 vertical +0 +2 +2 +Connector_Molex +Molex_KK-396_A-41791-0003_1x03_P3.96mm_Vertical +Molex KK 396 Interconnect System, old/engineering part number: A-41791-0003 example for new part number: 26-60-4030, 3 Pins (https://www.molex.com/pdm_docs/sd/026604020_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-396 vertical +0 +3 +3 +Connector_Molex +Molex_KK-396_A-41791-0004_1x04_P3.96mm_Vertical +Molex KK 396 Interconnect System, old/engineering part number: A-41791-0004 example for new part number: 26-60-4040, 4 Pins (https://www.molex.com/pdm_docs/sd/026604020_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-396 vertical +0 +4 +4 +Connector_Molex +Molex_KK-396_A-41791-0005_1x05_P3.96mm_Vertical +Molex KK 396 Interconnect System, old/engineering part number: A-41791-0005 example for new part number: 26-60-4050, 5 Pins (https://www.molex.com/pdm_docs/sd/026604020_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-396 vertical +0 +5 +5 +Connector_Molex +Molex_KK-396_A-41791-0006_1x06_P3.96mm_Vertical +Molex KK 396 Interconnect System, old/engineering part number: A-41791-0006 example for new part number: 26-60-4060, 6 Pins (https://www.molex.com/pdm_docs/sd/026604020_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-396 vertical +0 +6 +6 +Connector_Molex +Molex_KK-396_A-41791-0007_1x07_P3.96mm_Vertical +Molex KK 396 Interconnect System, old/engineering part number: A-41791-0007 example for new part number: 26-60-4070, 7 Pins (https://www.molex.com/pdm_docs/sd/026604020_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-396 vertical +0 +7 +7 +Connector_Molex +Molex_KK-396_A-41791-0008_1x08_P3.96mm_Vertical +Molex KK 396 Interconnect System, old/engineering part number: A-41791-0008 example for new part number: 26-60-4080, 8 Pins (https://www.molex.com/pdm_docs/sd/026604020_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-396 vertical +0 +8 +8 +Connector_Molex +Molex_KK-396_A-41791-0009_1x09_P3.96mm_Vertical +Molex KK 396 Interconnect System, old/engineering part number: A-41791-0009 example for new part number: 26-60-4090, 9 Pins (https://www.molex.com/pdm_docs/sd/026604020_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-396 vertical +0 +9 +9 +Connector_Molex +Molex_KK-396_A-41791-0010_1x10_P3.96mm_Vertical +Molex KK 396 Interconnect System, old/engineering part number: A-41791-0010 example for new part number: 26-60-4100, 10 Pins (https://www.molex.com/pdm_docs/sd/026604020_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-396 vertical +0 +10 +10 +Connector_Molex +Molex_KK-396_A-41791-0011_1x11_P3.96mm_Vertical +Molex KK 396 Interconnect System, old/engineering part number: A-41791-0011 example for new part number: 26-60-4110, 11 Pins (https://www.molex.com/pdm_docs/sd/026604020_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-396 vertical +0 +11 +11 +Connector_Molex +Molex_KK-396_A-41791-0012_1x12_P3.96mm_Vertical +Molex KK 396 Interconnect System, old/engineering part number: A-41791-0012 example for new part number: 26-60-4120, 12 Pins (https://www.molex.com/pdm_docs/sd/026604020_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-396 vertical +0 +12 +12 +Connector_Molex +Molex_KK-396_A-41791-0013_1x13_P3.96mm_Vertical +Molex KK 396 Interconnect System, old/engineering part number: A-41791-0013 example for new part number: 26-60-4130, 13 Pins (https://www.molex.com/pdm_docs/sd/026604020_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-396 vertical +0 +13 +13 +Connector_Molex +Molex_KK-396_A-41791-0014_1x14_P3.96mm_Vertical +Molex KK 396 Interconnect System, old/engineering part number: A-41791-0014 example for new part number: 26-60-4140, 14 Pins (https://www.molex.com/pdm_docs/sd/026604020_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-396 vertical +0 +14 +14 +Connector_Molex +Molex_KK-396_A-41791-0015_1x15_P3.96mm_Vertical +Molex KK 396 Interconnect System, old/engineering part number: A-41791-0015 example for new part number: 26-60-4150, 15 Pins (https://www.molex.com/pdm_docs/sd/026604020_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-396 vertical +0 +15 +15 +Connector_Molex +Molex_KK-396_A-41791-0016_1x16_P3.96mm_Vertical +Molex KK 396 Interconnect System, old/engineering part number: A-41791-0016 example for new part number: 26-60-4160, 16 Pins (https://www.molex.com/pdm_docs/sd/026604020_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-396 vertical +0 +16 +16 +Connector_Molex +Molex_KK-396_A-41791-0017_1x17_P3.96mm_Vertical +Molex KK 396 Interconnect System, old/engineering part number: A-41791-0017 example for new part number: 26-60-4170, 17 Pins (https://www.molex.com/pdm_docs/sd/026604020_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-396 vertical +0 +17 +17 +Connector_Molex +Molex_KK-396_A-41791-0018_1x18_P3.96mm_Vertical +Molex KK 396 Interconnect System, old/engineering part number: A-41791-0018 example for new part number: 26-60-4180, 18 Pins (https://www.molex.com/pdm_docs/sd/026604020_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-396 vertical +0 +18 +18 +Connector_Molex +Molex_KK-396_A-41792-0002_1x02_P3.96mm_Horizontal +Molex KK 396 Interconnect System, old/engineering part number: A-41792-0002 example for new part number: 26-60-5020, 2 Pins (https://www.molex.com/pdm_docs/sd/026605050_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-396 horizontal +0 +2 +2 +Connector_Molex +Molex_KK-396_A-41792-0003_1x03_P3.96mm_Horizontal +Molex KK 396 Interconnect System, old/engineering part number: A-41792-0003 example for new part number: 26-60-5030, 3 Pins (https://www.molex.com/pdm_docs/sd/026605050_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-396 horizontal +0 +3 +3 +Connector_Molex +Molex_KK-396_A-41792-0004_1x04_P3.96mm_Horizontal +Molex KK 396 Interconnect System, old/engineering part number: A-41792-0004 example for new part number: 26-60-5040, 4 Pins (https://www.molex.com/pdm_docs/sd/026605050_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-396 horizontal +0 +4 +4 +Connector_Molex +Molex_KK-396_A-41792-0005_1x05_P3.96mm_Horizontal +Molex KK 396 Interconnect System, old/engineering part number: A-41792-0005 example for new part number: 26-60-5050, 5 Pins (https://www.molex.com/pdm_docs/sd/026605050_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-396 horizontal +0 +5 +5 +Connector_Molex +Molex_KK-396_A-41792-0006_1x06_P3.96mm_Horizontal +Molex KK 396 Interconnect System, old/engineering part number: A-41792-0006 example for new part number: 26-60-5060, 6 Pins (https://www.molex.com/pdm_docs/sd/026605050_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-396 horizontal +0 +6 +6 +Connector_Molex +Molex_KK-396_A-41792-0007_1x07_P3.96mm_Horizontal +Molex KK 396 Interconnect System, old/engineering part number: A-41792-0007 example for new part number: 26-60-5070, 7 Pins (https://www.molex.com/pdm_docs/sd/026605050_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-396 horizontal +0 +7 +7 +Connector_Molex +Molex_KK-396_A-41792-0008_1x08_P3.96mm_Horizontal +Molex KK 396 Interconnect System, old/engineering part number: A-41792-0008 example for new part number: 26-60-5080, 8 Pins (https://www.molex.com/pdm_docs/sd/026605050_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-396 horizontal +0 +8 +8 +Connector_Molex +Molex_KK-396_A-41792-0009_1x09_P3.96mm_Horizontal +Molex KK 396 Interconnect System, old/engineering part number: A-41792-0009 example for new part number: 26-60-5090, 9 Pins (https://www.molex.com/pdm_docs/sd/026605050_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-396 horizontal +0 +9 +9 +Connector_Molex +Molex_KK-396_A-41792-0010_1x10_P3.96mm_Horizontal +Molex KK 396 Interconnect System, old/engineering part number: A-41792-0010 example for new part number: 26-60-5100, 10 Pins (https://www.molex.com/pdm_docs/sd/026605050_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-396 horizontal +0 +10 +10 +Connector_Molex +Molex_KK-396_A-41792-0011_1x11_P3.96mm_Horizontal +Molex KK 396 Interconnect System, old/engineering part number: A-41792-0011 example for new part number: 26-60-5110, 11 Pins (https://www.molex.com/pdm_docs/sd/026605050_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-396 horizontal +0 +11 +11 +Connector_Molex +Molex_KK-396_A-41792-0012_1x12_P3.96mm_Horizontal +Molex KK 396 Interconnect System, old/engineering part number: A-41792-0012 example for new part number: 26-60-5120, 12 Pins (https://www.molex.com/pdm_docs/sd/026605050_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-396 horizontal +0 +12 +12 +Connector_Molex +Molex_KK-396_A-41792-0013_1x13_P3.96mm_Horizontal +Molex KK 396 Interconnect System, old/engineering part number: A-41792-0013 example for new part number: 26-60-5130, 13 Pins (https://www.molex.com/pdm_docs/sd/026605050_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-396 horizontal +0 +13 +13 +Connector_Molex +Molex_KK-396_A-41792-0014_1x14_P3.96mm_Horizontal +Molex KK 396 Interconnect System, old/engineering part number: A-41792-0014 example for new part number: 26-60-5140, 14 Pins (https://www.molex.com/pdm_docs/sd/026605050_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-396 horizontal +0 +14 +14 +Connector_Molex +Molex_KK-396_A-41792-0015_1x15_P3.96mm_Horizontal +Molex KK 396 Interconnect System, old/engineering part number: A-41792-0015 example for new part number: 26-60-5150, 15 Pins (https://www.molex.com/pdm_docs/sd/026605050_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-396 horizontal +0 +15 +15 +Connector_Molex +Molex_KK-396_A-41792-0016_1x16_P3.96mm_Horizontal +Molex KK 396 Interconnect System, old/engineering part number: A-41792-0016 example for new part number: 26-60-5160, 16 Pins (https://www.molex.com/pdm_docs/sd/026605050_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-396 horizontal +0 +16 +16 +Connector_Molex +Molex_KK-396_A-41792-0017_1x17_P3.96mm_Horizontal +Molex KK 396 Interconnect System, old/engineering part number: A-41792-0017 example for new part number: 26-60-5170, 17 Pins (https://www.molex.com/pdm_docs/sd/026605050_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-396 horizontal +0 +17 +17 +Connector_Molex +Molex_KK-396_A-41792-0018_1x18_P3.96mm_Horizontal +Molex KK 396 Interconnect System, old/engineering part number: A-41792-0018 example for new part number: 26-60-5180, 18 Pins (https://www.molex.com/pdm_docs/sd/026605050_sd.pdf), generated with kicad-footprint-generator +connector Molex KK-396 horizontal +0 +18 +18 +Connector_Molex +Molex_Mega-Fit_76825-0002_2x01_P5.70mm_Horizontal +Molex Mega-Fit Power Connectors, 76825-0002 (compatible alternatives: 172064-0002, 172064-1002), 1 Pins per row (http://www.molex.com/pdm_docs/sd/1720640002_sd.pdf), generated with kicad-footprint-generator +connector Molex Mega-Fit top entry +0 +2 +2 +Connector_Molex +Molex_Mega-Fit_76825-0004_2x02_P5.70mm_Horizontal +Molex Mega-Fit Power Connectors, 76825-0004 (compatible alternatives: 172064-0004, 172064-1004), 2 Pins per row (http://www.molex.com/pdm_docs/sd/1720640002_sd.pdf), generated with kicad-footprint-generator +connector Molex Mega-Fit top entry +0 +4 +4 +Connector_Molex +Molex_Mega-Fit_76825-0006_2x03_P5.70mm_Horizontal +Molex Mega-Fit Power Connectors, 76825-0006 (compatible alternatives: 172064-0006, 172064-1006), 3 Pins per row (http://www.molex.com/pdm_docs/sd/1720640002_sd.pdf), generated with kicad-footprint-generator +connector Molex Mega-Fit top entry +0 +6 +6 +Connector_Molex +Molex_Mega-Fit_76825-0008_2x04_P5.70mm_Horizontal +Molex Mega-Fit Power Connectors, 76825-0008 (compatible alternatives: 172064-0008, 172064-1008), 4 Pins per row (http://www.molex.com/pdm_docs/sd/1720640002_sd.pdf), generated with kicad-footprint-generator +connector Molex Mega-Fit top entry +0 +8 +8 +Connector_Molex +Molex_Mega-Fit_76825-0010_2x05_P5.70mm_Horizontal +Molex Mega-Fit Power Connectors, 76825-0010 (compatible alternatives: 172064-0010, 172064-1010), 5 Pins per row (http://www.molex.com/pdm_docs/sd/1720640002_sd.pdf), generated with kicad-footprint-generator +connector Molex Mega-Fit top entry +0 +10 +10 +Connector_Molex +Molex_Mega-Fit_76825-0012_2x06_P5.70mm_Horizontal +Molex Mega-Fit Power Connectors, 76825-0012 (compatible alternatives: 172064-0012, 172064-1012), 6 Pins per row (http://www.molex.com/pdm_docs/sd/1720640002_sd.pdf), generated with kicad-footprint-generator +connector Molex Mega-Fit top entry +0 +12 +12 +Connector_Molex +Molex_Mega-Fit_76829-0002_2x01_P5.70mm_Vertical +Molex Mega-Fit Power Connectors, 76829-0002 (compatible alternatives: 172065-0002, 172065-1002), 1 Pins per row (http://www.molex.com/pdm_docs/sd/768290004_sd.pdf), generated with kicad-footprint-generator +connector Molex Mega-Fit side entry +0 +2 +2 +Connector_Molex +Molex_Mega-Fit_76829-0004_2x02_P5.70mm_Vertical +Molex Mega-Fit Power Connectors, 76829-0004 (compatible alternatives: 172065-0004, 172065-1004), 2 Pins per row (http://www.molex.com/pdm_docs/sd/768290004_sd.pdf), generated with kicad-footprint-generator +connector Molex Mega-Fit side entry +0 +4 +4 +Connector_Molex +Molex_Mega-Fit_76829-0006_2x03_P5.70mm_Vertical +Molex Mega-Fit Power Connectors, 76829-0006 (compatible alternatives: 172065-0006, 172065-1006), 3 Pins per row (http://www.molex.com/pdm_docs/sd/768290004_sd.pdf), generated with kicad-footprint-generator +connector Molex Mega-Fit side entry +0 +6 +6 +Connector_Molex +Molex_Mega-Fit_76829-0008_2x04_P5.70mm_Vertical +Molex Mega-Fit Power Connectors, 76829-0008 (compatible alternatives: 172065-0008, 172065-1008), 4 Pins per row (http://www.molex.com/pdm_docs/sd/768290004_sd.pdf), generated with kicad-footprint-generator +connector Molex Mega-Fit side entry +0 +8 +8 +Connector_Molex +Molex_Mega-Fit_76829-0010_2x05_P5.70mm_Vertical +Molex Mega-Fit Power Connectors, 76829-0010 (compatible alternatives: 172065-0010, 172065-1010), 5 Pins per row (http://www.molex.com/pdm_docs/sd/768290004_sd.pdf), generated with kicad-footprint-generator +connector Molex Mega-Fit side entry +0 +10 +10 +Connector_Molex +Molex_Mega-Fit_76829-0012_2x06_P5.70mm_Vertical +Molex Mega-Fit Power Connectors, 76829-0012 (compatible alternatives: 172065-0012, 172065-1012), 6 Pins per row (http://www.molex.com/pdm_docs/sd/768290004_sd.pdf), generated with kicad-footprint-generator +connector Molex Mega-Fit side entry +0 +12 +12 +Connector_Molex +Molex_Mega-Fit_76829-0102_2x01_P5.70mm_Vertical +Molex Mega-Fit Power Connectors, 76829-0102 (compatible alternatives: 172065-0202, 172065-0302), 1 Pins per row (http://www.molex.com/pdm_docs/sd/768290102_sd.pdf), generated with kicad-footprint-generator +connector Molex Mega-Fit side entry +0 +2 +2 +Connector_Molex +Molex_Mega-Fit_76829-0104_2x02_P5.70mm_Vertical +Molex Mega-Fit Power Connectors, 76829-0104 (compatible alternatives: 172065-0204, 172065-0304), 2 Pins per row (http://www.molex.com/pdm_docs/sd/768290102_sd.pdf), generated with kicad-footprint-generator +connector Molex Mega-Fit side entry +0 +4 +4 +Connector_Molex +Molex_Mega-Fit_76829-0106_2x03_P5.70mm_Vertical +Molex Mega-Fit Power Connectors, 76829-0106 (compatible alternatives: 172065-0206, 172065-0306), 3 Pins per row (http://www.molex.com/pdm_docs/sd/768290102_sd.pdf), generated with kicad-footprint-generator +connector Molex Mega-Fit side entry +0 +6 +6 +Connector_Molex +Molex_Mega-Fit_76829-0108_2x04_P5.70mm_Vertical +Molex Mega-Fit Power Connectors, 76829-0108 (compatible alternatives: 172065-0208, 172065-0308), 4 Pins per row (http://www.molex.com/pdm_docs/sd/768290102_sd.pdf), generated with kicad-footprint-generator +connector Molex Mega-Fit side entry +0 +8 +8 +Connector_Molex +Molex_Mega-Fit_76829-0110_2x05_P5.70mm_Vertical +Molex Mega-Fit Power Connectors, 76829-0110 (compatible alternatives: 172065-0210, 172065-0310), 5 Pins per row (http://www.molex.com/pdm_docs/sd/768290102_sd.pdf), generated with kicad-footprint-generator +connector Molex Mega-Fit side entry +0 +10 +10 +Connector_Molex +Molex_Mega-Fit_76829-0112_2x06_P5.70mm_Vertical +Molex Mega-Fit Power Connectors, 76829-0112 (compatible alternatives: 172065-0212, 172065-0312), 6 Pins per row (http://www.molex.com/pdm_docs/sd/768290102_sd.pdf), generated with kicad-footprint-generator +connector Molex Mega-Fit side entry +0 +12 +12 +Connector_Molex +Molex_Micro-Fit_3.0_43045-0200_2x01_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43045-0200 (alternative finishes: 43045-020x), 1 Pins per row (https://www.molex.com/pdm_docs/sd/430450201_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +2 +2 +Connector_Molex +Molex_Micro-Fit_3.0_43045-0210_2x01-1MP_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43045-0210 (compatible alternatives: 43045-0211, 43045-0209), 1 Pins per row (http://www.molex.com/pdm_docs/sd/430450210_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 top entry +0 +4 +3 +Connector_Molex +Molex_Micro-Fit_3.0_43045-0212_2x01_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43045-0212 (compatible alternatives: 43045-0213, 43045-0224), 1 Pins per row (http://www.molex.com/pdm_docs/sd/430450212_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +2 +2 +Connector_Molex +Molex_Micro-Fit_3.0_43045-0215_2x01_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43045-0215 (compatible alternatives: 43045-0216, 43045-0217), 1 Pins per row (http://www.molex.com/pdm_docs/sd/430450217_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +2 +2 +Connector_Molex +Molex_Micro-Fit_3.0_43045-0218_2x01-1MP_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43045-0218 (compatible alternatives: 43045-0219, 43045-0220), 1 Pins per row (http://www.molex.com/pdm_docs/sd/430450218_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +4 +3 +Connector_Molex +Molex_Micro-Fit_3.0_43045-0221_2x01-1MP_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43045-0221 (alternative finishes: 43045-022x), 1 Pins per row (https://www.molex.com/pdm_docs/sd/430450221_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +4 +3 +Connector_Molex +Molex_Micro-Fit_3.0_43045-0400_2x02_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43045-0400 (alternative finishes: 43045-040x), 2 Pins per row (https://www.molex.com/pdm_docs/sd/430450201_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +4 +4 +Connector_Molex +Molex_Micro-Fit_3.0_43045-0410_2x02-1MP_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43045-0410 (compatible alternatives: 43045-0411, 43045-0409), 2 Pins per row (http://www.molex.com/pdm_docs/sd/430450210_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 top entry +0 +6 +5 +Connector_Molex +Molex_Micro-Fit_3.0_43045-0412_2x02_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43045-0412 (compatible alternatives: 43045-0413, 43045-0424), 2 Pins per row (http://www.molex.com/pdm_docs/sd/430450212_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +4 +4 +Connector_Molex +Molex_Micro-Fit_3.0_43045-0415_2x02_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43045-0415 (compatible alternatives: 43045-0416, 43045-0417), 2 Pins per row (http://www.molex.com/pdm_docs/sd/430450217_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +4 +4 +Connector_Molex +Molex_Micro-Fit_3.0_43045-0418_2x02-1MP_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43045-0418 (compatible alternatives: 43045-0419, 43045-0420), 2 Pins per row (http://www.molex.com/pdm_docs/sd/430450218_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +6 +5 +Connector_Molex +Molex_Micro-Fit_3.0_43045-0421_2x02-1MP_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43045-0421 (alternative finishes: 43045-042x), 2 Pins per row (https://www.molex.com/pdm_docs/sd/430450221_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +6 +5 +Connector_Molex +Molex_Micro-Fit_3.0_43045-0600_2x03_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43045-0600 (alternative finishes: 43045-060x), 3 Pins per row (https://www.molex.com/pdm_docs/sd/430450201_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +6 +6 +Connector_Molex +Molex_Micro-Fit_3.0_43045-0610_2x03-1MP_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43045-0610 (compatible alternatives: 43045-0611, 43045-0609), 3 Pins per row (http://www.molex.com/pdm_docs/sd/430450210_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 top entry +0 +8 +7 +Connector_Molex +Molex_Micro-Fit_3.0_43045-0612_2x03_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43045-0612 (compatible alternatives: 43045-0613, 43045-0624), 3 Pins per row (http://www.molex.com/pdm_docs/sd/430450212_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +6 +6 +Connector_Molex +Molex_Micro-Fit_3.0_43045-0615_2x03_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43045-0615 (compatible alternatives: 43045-0616, 43045-0617), 3 Pins per row (http://www.molex.com/pdm_docs/sd/430450217_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +6 +6 +Connector_Molex +Molex_Micro-Fit_3.0_43045-0618_2x03-1MP_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43045-0618 (compatible alternatives: 43045-0619, 43045-0620), 3 Pins per row (http://www.molex.com/pdm_docs/sd/430450218_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +8 +7 +Connector_Molex +Molex_Micro-Fit_3.0_43045-0621_2x03-1MP_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43045-0621 (alternative finishes: 43045-062x), 3 Pins per row (https://www.molex.com/pdm_docs/sd/430450221_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +8 +7 +Connector_Molex +Molex_Micro-Fit_3.0_43045-0800_2x04_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43045-0800 (alternative finishes: 43045-080x), 4 Pins per row (https://www.molex.com/pdm_docs/sd/430450201_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +8 +8 +Connector_Molex +Molex_Micro-Fit_3.0_43045-0810_2x04-1MP_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43045-0810 (compatible alternatives: 43045-0811, 43045-0809), 4 Pins per row (http://www.molex.com/pdm_docs/sd/430450210_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 top entry +0 +10 +9 +Connector_Molex +Molex_Micro-Fit_3.0_43045-0812_2x04_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43045-0812 (compatible alternatives: 43045-0813, 43045-0824), 4 Pins per row (http://www.molex.com/pdm_docs/sd/430450212_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +8 +8 +Connector_Molex +Molex_Micro-Fit_3.0_43045-0815_2x04_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43045-0815 (compatible alternatives: 43045-0816, 43045-0817), 4 Pins per row (http://www.molex.com/pdm_docs/sd/430450217_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +8 +8 +Connector_Molex +Molex_Micro-Fit_3.0_43045-0818_2x04-1MP_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43045-0818 (compatible alternatives: 43045-0819, 43045-0820), 4 Pins per row (http://www.molex.com/pdm_docs/sd/430450218_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +10 +9 +Connector_Molex +Molex_Micro-Fit_3.0_43045-0821_2x04-1MP_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43045-0821 (alternative finishes: 43045-082x), 4 Pins per row (https://www.molex.com/pdm_docs/sd/430450221_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +10 +9 +Connector_Molex +Molex_Micro-Fit_3.0_43045-1000_2x05_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43045-1000 (alternative finishes: 43045-100x), 5 Pins per row (https://www.molex.com/pdm_docs/sd/430450201_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +10 +10 +Connector_Molex +Molex_Micro-Fit_3.0_43045-1010_2x05-1MP_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43045-1010 (compatible alternatives: 43045-1011, 43045-1009), 5 Pins per row (http://www.molex.com/pdm_docs/sd/430450210_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 top entry +0 +12 +11 +Connector_Molex +Molex_Micro-Fit_3.0_43045-1012_2x05_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43045-1012 (compatible alternatives: 43045-1013, 43045-1024), 5 Pins per row (http://www.molex.com/pdm_docs/sd/430450212_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +10 +10 +Connector_Molex +Molex_Micro-Fit_3.0_43045-1015_2x05_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43045-1015 (compatible alternatives: 43045-1016, 43045-1017), 5 Pins per row (http://www.molex.com/pdm_docs/sd/430450217_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +10 +10 +Connector_Molex +Molex_Micro-Fit_3.0_43045-1018_2x05-1MP_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43045-1018 (compatible alternatives: 43045-1019, 43045-1020), 5 Pins per row (http://www.molex.com/pdm_docs/sd/430450218_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +12 +11 +Connector_Molex +Molex_Micro-Fit_3.0_43045-1021_2x05-1MP_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43045-1021 (alternative finishes: 43045-102x), 5 Pins per row (https://www.molex.com/pdm_docs/sd/430450221_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +12 +11 +Connector_Molex +Molex_Micro-Fit_3.0_43045-1200_2x06_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43045-1200 (alternative finishes: 43045-120x), 6 Pins per row (https://www.molex.com/pdm_docs/sd/430450201_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +12 +12 +Connector_Molex +Molex_Micro-Fit_3.0_43045-1210_2x06-1MP_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43045-1210 (compatible alternatives: 43045-1211, 43045-1209), 6 Pins per row (http://www.molex.com/pdm_docs/sd/430450210_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 top entry +0 +14 +13 +Connector_Molex +Molex_Micro-Fit_3.0_43045-1212_2x06_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43045-1212 (compatible alternatives: 43045-1213, 43045-1224), 6 Pins per row (http://www.molex.com/pdm_docs/sd/430450212_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +12 +12 +Connector_Molex +Molex_Micro-Fit_3.0_43045-1215_2x06_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43045-1215 (compatible alternatives: 43045-1216, 43045-1217), 6 Pins per row (http://www.molex.com/pdm_docs/sd/430450217_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +12 +12 +Connector_Molex +Molex_Micro-Fit_3.0_43045-1218_2x06-1MP_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43045-1218 (compatible alternatives: 43045-1219, 43045-1220), 6 Pins per row (http://www.molex.com/pdm_docs/sd/430450218_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +14 +13 +Connector_Molex +Molex_Micro-Fit_3.0_43045-1221_2x06-1MP_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43045-1221 (alternative finishes: 43045-122x), 6 Pins per row (https://www.molex.com/pdm_docs/sd/430450221_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +14 +13 +Connector_Molex +Molex_Micro-Fit_3.0_43045-1400_2x07_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43045-1400 (alternative finishes: 43045-140x), 7 Pins per row (https://www.molex.com/pdm_docs/sd/430450201_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +14 +14 +Connector_Molex +Molex_Micro-Fit_3.0_43045-1410_2x07-1MP_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43045-1410 (compatible alternatives: 43045-1411, 43045-1409), 7 Pins per row (http://www.molex.com/pdm_docs/sd/430450210_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 top entry +0 +16 +15 +Connector_Molex +Molex_Micro-Fit_3.0_43045-1412_2x07_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43045-1412 (compatible alternatives: 43045-1413, 43045-1424), 7 Pins per row (http://www.molex.com/pdm_docs/sd/430450212_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +14 +14 +Connector_Molex +Molex_Micro-Fit_3.0_43045-1415_2x07_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43045-1415 (compatible alternatives: 43045-1416, 43045-1417), 7 Pins per row (http://www.molex.com/pdm_docs/sd/430450217_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +14 +14 +Connector_Molex +Molex_Micro-Fit_3.0_43045-1418_2x07-1MP_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43045-1418 (compatible alternatives: 43045-1419, 43045-1420), 7 Pins per row (http://www.molex.com/pdm_docs/sd/430450218_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +16 +15 +Connector_Molex +Molex_Micro-Fit_3.0_43045-1421_2x07-1MP_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43045-1421 (alternative finishes: 43045-142x), 7 Pins per row (https://www.molex.com/pdm_docs/sd/430450221_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +16 +15 +Connector_Molex +Molex_Micro-Fit_3.0_43045-1600_2x08_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43045-1600 (alternative finishes: 43045-160x), 8 Pins per row (https://www.molex.com/pdm_docs/sd/430450201_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +16 +16 +Connector_Molex +Molex_Micro-Fit_3.0_43045-1610_2x08-1MP_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43045-1610 (compatible alternatives: 43045-1611, 43045-1609), 8 Pins per row (http://www.molex.com/pdm_docs/sd/430450210_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 top entry +0 +18 +17 +Connector_Molex +Molex_Micro-Fit_3.0_43045-1612_2x08_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43045-1612 (compatible alternatives: 43045-1613, 43045-1624), 8 Pins per row (http://www.molex.com/pdm_docs/sd/430450212_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +16 +16 +Connector_Molex +Molex_Micro-Fit_3.0_43045-1615_2x08_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43045-1615 (compatible alternatives: 43045-1616, 43045-1617), 8 Pins per row (http://www.molex.com/pdm_docs/sd/430450217_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +16 +16 +Connector_Molex +Molex_Micro-Fit_3.0_43045-1618_2x08-1MP_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43045-1618 (compatible alternatives: 43045-1619, 43045-1620), 8 Pins per row (http://www.molex.com/pdm_docs/sd/430450218_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +18 +17 +Connector_Molex +Molex_Micro-Fit_3.0_43045-1621_2x08-1MP_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43045-1621 (alternative finishes: 43045-162x), 8 Pins per row (https://www.molex.com/pdm_docs/sd/430450221_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +18 +17 +Connector_Molex +Molex_Micro-Fit_3.0_43045-1800_2x09_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43045-1800 (alternative finishes: 43045-180x), 9 Pins per row (https://www.molex.com/pdm_docs/sd/430450201_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +18 +18 +Connector_Molex +Molex_Micro-Fit_3.0_43045-1810_2x09-1MP_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43045-1810 (compatible alternatives: 43045-1811, 43045-1809), 9 Pins per row (http://www.molex.com/pdm_docs/sd/430450210_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 top entry +0 +20 +19 +Connector_Molex +Molex_Micro-Fit_3.0_43045-1812_2x09_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43045-1812 (compatible alternatives: 43045-1813, 43045-1824), 9 Pins per row (http://www.molex.com/pdm_docs/sd/430450212_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +18 +18 +Connector_Molex +Molex_Micro-Fit_3.0_43045-1815_2x09_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43045-1815 (compatible alternatives: 43045-1816, 43045-1817), 9 Pins per row (http://www.molex.com/pdm_docs/sd/430450217_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +18 +18 +Connector_Molex +Molex_Micro-Fit_3.0_43045-1818_2x09-1MP_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43045-1818 (compatible alternatives: 43045-1819, 43045-1820), 9 Pins per row (http://www.molex.com/pdm_docs/sd/430450218_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +20 +19 +Connector_Molex +Molex_Micro-Fit_3.0_43045-1821_2x09-1MP_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43045-1821 (alternative finishes: 43045-182x), 9 Pins per row (https://www.molex.com/pdm_docs/sd/430450221_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +20 +19 +Connector_Molex +Molex_Micro-Fit_3.0_43045-2000_2x10_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43045-2000 (alternative finishes: 43045-200x), 10 Pins per row (https://www.molex.com/pdm_docs/sd/430450201_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +20 +20 +Connector_Molex +Molex_Micro-Fit_3.0_43045-2010_2x10-1MP_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43045-2010 (compatible alternatives: 43045-2011, 43045-2009), 10 Pins per row (http://www.molex.com/pdm_docs/sd/430450210_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 top entry +0 +22 +21 +Connector_Molex +Molex_Micro-Fit_3.0_43045-2012_2x10_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43045-2012 (compatible alternatives: 43045-2013, 43045-2024), 10 Pins per row (http://www.molex.com/pdm_docs/sd/430450212_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +20 +20 +Connector_Molex +Molex_Micro-Fit_3.0_43045-2015_2x10_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43045-2015 (compatible alternatives: 43045-2016, 43045-2017), 10 Pins per row (http://www.molex.com/pdm_docs/sd/430450217_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +20 +20 +Connector_Molex +Molex_Micro-Fit_3.0_43045-2018_2x10-1MP_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43045-2018 (compatible alternatives: 43045-2019, 43045-2020), 10 Pins per row (http://www.molex.com/pdm_docs/sd/430450218_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +22 +21 +Connector_Molex +Molex_Micro-Fit_3.0_43045-2021_2x10-1MP_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43045-2021 (alternative finishes: 43045-202x), 10 Pins per row (https://www.molex.com/pdm_docs/sd/430450221_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +22 +21 +Connector_Molex +Molex_Micro-Fit_3.0_43045-2200_2x11_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43045-2200 (alternative finishes: 43045-220x), 11 Pins per row (https://www.molex.com/pdm_docs/sd/430450201_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +22 +22 +Connector_Molex +Molex_Micro-Fit_3.0_43045-2210_2x11-1MP_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43045-2210 (compatible alternatives: 43045-2211, 43045-2209), 11 Pins per row (http://www.molex.com/pdm_docs/sd/430450210_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 top entry +0 +24 +23 +Connector_Molex +Molex_Micro-Fit_3.0_43045-2212_2x11_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43045-2212 (compatible alternatives: 43045-2213, 43045-2224), 11 Pins per row (http://www.molex.com/pdm_docs/sd/430450212_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +22 +22 +Connector_Molex +Molex_Micro-Fit_3.0_43045-2215_2x11_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43045-2215 (compatible alternatives: 43045-2216, 43045-2217), 11 Pins per row (http://www.molex.com/pdm_docs/sd/430450217_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +22 +22 +Connector_Molex +Molex_Micro-Fit_3.0_43045-2218_2x11-1MP_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43045-2218 (compatible alternatives: 43045-2219, 43045-2220), 11 Pins per row (http://www.molex.com/pdm_docs/sd/430450218_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +24 +23 +Connector_Molex +Molex_Micro-Fit_3.0_43045-2221_2x11-1MP_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43045-2221 (alternative finishes: 43045-222x), 11 Pins per row (https://www.molex.com/pdm_docs/sd/430450221_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +24 +23 +Connector_Molex +Molex_Micro-Fit_3.0_43045-2400_2x12_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43045-2400 (alternative finishes: 43045-240x), 12 Pins per row (https://www.molex.com/pdm_docs/sd/430450201_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +24 +24 +Connector_Molex +Molex_Micro-Fit_3.0_43045-2410_2x12-1MP_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43045-2410 (compatible alternatives: 43045-2411, 43045-2409), 12 Pins per row (http://www.molex.com/pdm_docs/sd/430450210_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 top entry +0 +26 +25 +Connector_Molex +Molex_Micro-Fit_3.0_43045-2412_2x12_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43045-2412 (compatible alternatives: 43045-2413, 43045-2424), 12 Pins per row (http://www.molex.com/pdm_docs/sd/430450212_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +24 +24 +Connector_Molex +Molex_Micro-Fit_3.0_43045-2415_2x12_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43045-2415 (compatible alternatives: 43045-2416, 43045-2417), 12 Pins per row (http://www.molex.com/pdm_docs/sd/430450217_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +24 +24 +Connector_Molex +Molex_Micro-Fit_3.0_43045-2418_2x12-1MP_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43045-2418 (compatible alternatives: 43045-2419, 43045-2420), 12 Pins per row (http://www.molex.com/pdm_docs/sd/430450218_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +26 +25 +Connector_Molex +Molex_Micro-Fit_3.0_43045-2421_2x12-1MP_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43045-2421 (alternative finishes: 43045-242x), 12 Pins per row (https://www.molex.com/pdm_docs/sd/430450221_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +26 +25 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0200_1x02_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43650-0200 (compatible alternatives: 43650-0201, 43650-0202), 2 Pins per row (https://www.molex.com/pdm_docs/sd/436500300_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 top entry +0 +2 +2 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0210_1x02-1MP_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43650-0210 (compatible alternatives: 43650-0211, 43650-0209), 2 Pins per row (https://www.molex.com/pdm_docs/sd/436500210_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +4 +3 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0210_1x02-1MP_P3.00mm_Horizontal_PnP +Molex Micro-Fit 3.0 Connector System, 43650-0210 (compatible alternatives: 43650-0211, 43650-0209), 2 Pins per row (https://www.molex.com/pdm_docs/sd/436500210_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +4 +3 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0215_1x02_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43650-0215 (compatible alternatives: 43650-0216, 43650-0217), 2 Pins per row (http://www.molex.com/pdm_docs/sd/436500215_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +2 +2 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0221_1x02_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43650-0221 (compatible alternatives: 43650-0222, 43650-0223), 2 Pins per row (https://www.molex.com/pdm_docs/sd/436500221_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +2 +2 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0224_1x02-1MP_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43650-0224 (compatible alternatives: 43650-0225, 43650-0226), 2 Pins per row (https://www.molex.com/pdm_docs/sd/436500224_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +4 +3 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0300_1x03_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43650-0300 (compatible alternatives: 43650-0301, 43650-0302), 3 Pins per row (https://www.molex.com/pdm_docs/sd/436500300_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 top entry +0 +3 +3 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0310_1x03-1MP_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43650-0310 (compatible alternatives: 43650-0311, 43650-0309), 3 Pins per row (https://www.molex.com/pdm_docs/sd/436500210_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +5 +4 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0310_1x03-1MP_P3.00mm_Horizontal_PnP +Molex Micro-Fit 3.0 Connector System, 43650-0310 (compatible alternatives: 43650-0311, 43650-0309), 3 Pins per row (https://www.molex.com/pdm_docs/sd/436500210_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +5 +4 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0315_1x03_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43650-0315 (compatible alternatives: 43650-0316, 43650-0317), 3 Pins per row (http://www.molex.com/pdm_docs/sd/436500215_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +3 +3 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0321_1x03_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43650-0321 (compatible alternatives: 43650-0322, 43650-0323), 3 Pins per row (https://www.molex.com/pdm_docs/sd/436500221_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +3 +3 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0324_1x03-1MP_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43650-0324 (compatible alternatives: 43650-0325, 43650-0326), 3 Pins per row (https://www.molex.com/pdm_docs/sd/436500224_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +5 +4 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0400_1x04_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43650-0400 (compatible alternatives: 43650-0401, 43650-0402), 4 Pins per row (https://www.molex.com/pdm_docs/sd/436500300_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 top entry +0 +4 +4 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0410_1x04-1MP_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43650-0410 (compatible alternatives: 43650-0411, 43650-0409), 4 Pins per row (https://www.molex.com/pdm_docs/sd/436500210_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +6 +5 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0410_1x04-1MP_P3.00mm_Horizontal_PnP +Molex Micro-Fit 3.0 Connector System, 43650-0410 (compatible alternatives: 43650-0411, 43650-0409), 4 Pins per row (https://www.molex.com/pdm_docs/sd/436500210_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +6 +5 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0415_1x04_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43650-0415 (compatible alternatives: 43650-0416, 43650-0417), 4 Pins per row (http://www.molex.com/pdm_docs/sd/436500215_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +4 +4 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0421_1x04_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43650-0421 (compatible alternatives: 43650-0422, 43650-0423), 4 Pins per row (https://www.molex.com/pdm_docs/sd/436500221_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +4 +4 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0424_1x04-1MP_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43650-0424 (compatible alternatives: 43650-0425, 43650-0426), 4 Pins per row (https://www.molex.com/pdm_docs/sd/436500224_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +6 +5 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0500_1x05_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43650-0500 (compatible alternatives: 43650-0501, 43650-0502), 5 Pins per row (https://www.molex.com/pdm_docs/sd/436500300_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 top entry +0 +5 +5 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0510_1x05-1MP_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43650-0510 (compatible alternatives: 43650-0511, 43650-0509), 5 Pins per row (https://www.molex.com/pdm_docs/sd/436500210_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +7 +6 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0510_1x05-1MP_P3.00mm_Horizontal_PnP +Molex Micro-Fit 3.0 Connector System, 43650-0510 (compatible alternatives: 43650-0511, 43650-0509), 5 Pins per row (https://www.molex.com/pdm_docs/sd/436500210_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +7 +6 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0515_1x05_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43650-0515 (compatible alternatives: 43650-0516, 43650-0517), 5 Pins per row (http://www.molex.com/pdm_docs/sd/436500215_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +5 +5 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0521_1x05_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43650-0521 (compatible alternatives: 43650-0522, 43650-0523), 5 Pins per row (https://www.molex.com/pdm_docs/sd/436500221_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +5 +5 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0524_1x05-1MP_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43650-0524 (compatible alternatives: 43650-0525, 43650-0526), 5 Pins per row (https://www.molex.com/pdm_docs/sd/436500224_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +7 +6 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0600_1x06_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43650-0600 (compatible alternatives: 43650-0601, 43650-0602), 6 Pins per row (https://www.molex.com/pdm_docs/sd/436500300_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 top entry +0 +6 +6 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0610_1x06-1MP_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43650-0610 (compatible alternatives: 43650-0611, 43650-0609), 6 Pins per row (https://www.molex.com/pdm_docs/sd/436500210_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +8 +7 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0610_1x06-1MP_P3.00mm_Horizontal_PnP +Molex Micro-Fit 3.0 Connector System, 43650-0610 (compatible alternatives: 43650-0611, 43650-0609), 6 Pins per row (https://www.molex.com/pdm_docs/sd/436500210_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +8 +7 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0615_1x06_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43650-0615 (compatible alternatives: 43650-0616, 43650-0617), 6 Pins per row (http://www.molex.com/pdm_docs/sd/436500215_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +6 +6 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0621_1x06_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43650-0621 (compatible alternatives: 43650-0622, 43650-0623), 6 Pins per row (https://www.molex.com/pdm_docs/sd/436500221_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +6 +6 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0624_1x06-1MP_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43650-0624 (compatible alternatives: 43650-0625, 43650-0626), 6 Pins per row (https://www.molex.com/pdm_docs/sd/436500224_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +8 +7 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0700_1x07_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43650-0700 (compatible alternatives: 43650-0701, 43650-0702), 7 Pins per row (https://www.molex.com/pdm_docs/sd/436500300_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 top entry +0 +7 +7 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0710_1x07-1MP_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43650-0710 (compatible alternatives: 43650-0711, 43650-0709), 7 Pins per row (https://www.molex.com/pdm_docs/sd/436500210_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +9 +8 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0710_1x07-1MP_P3.00mm_Horizontal_PnP +Molex Micro-Fit 3.0 Connector System, 43650-0710 (compatible alternatives: 43650-0711, 43650-0709), 7 Pins per row (https://www.molex.com/pdm_docs/sd/436500210_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +9 +8 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0715_1x07_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43650-0715 (compatible alternatives: 43650-0716, 43650-0717), 7 Pins per row (http://www.molex.com/pdm_docs/sd/436500215_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +7 +7 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0721_1x07_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43650-0721 (compatible alternatives: 43650-0722, 43650-0723), 7 Pins per row (https://www.molex.com/pdm_docs/sd/436500221_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +7 +7 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0724_1x07-1MP_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43650-0724 (compatible alternatives: 43650-0725, 43650-0726), 7 Pins per row (https://www.molex.com/pdm_docs/sd/436500224_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +9 +8 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0800_1x08_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43650-0800 (compatible alternatives: 43650-0801, 43650-0802), 8 Pins per row (https://www.molex.com/pdm_docs/sd/436500300_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 top entry +0 +8 +8 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0810_1x08-1MP_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43650-0810 (compatible alternatives: 43650-0811, 43650-0809), 8 Pins per row (https://www.molex.com/pdm_docs/sd/436500210_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +10 +9 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0810_1x08-1MP_P3.00mm_Horizontal_PnP +Molex Micro-Fit 3.0 Connector System, 43650-0810 (compatible alternatives: 43650-0811, 43650-0809), 8 Pins per row (https://www.molex.com/pdm_docs/sd/436500210_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +10 +9 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0815_1x08_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43650-0815 (compatible alternatives: 43650-0816, 43650-0817), 8 Pins per row (http://www.molex.com/pdm_docs/sd/436500215_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +8 +8 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0821_1x08_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43650-0821 (compatible alternatives: 43650-0822, 43650-0823), 8 Pins per row (https://www.molex.com/pdm_docs/sd/436500221_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +8 +8 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0824_1x08-1MP_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43650-0824 (compatible alternatives: 43650-0825, 43650-0826), 8 Pins per row (https://www.molex.com/pdm_docs/sd/436500224_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +10 +9 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0900_1x09_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43650-0900 (compatible alternatives: 43650-0901, 43650-0902), 9 Pins per row (https://www.molex.com/pdm_docs/sd/436500300_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 top entry +0 +9 +9 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0910_1x09-1MP_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43650-0910 (compatible alternatives: 43650-0911, 43650-0909), 9 Pins per row (https://www.molex.com/pdm_docs/sd/436500210_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +11 +10 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0910_1x09-1MP_P3.00mm_Horizontal_PnP +Molex Micro-Fit 3.0 Connector System, 43650-0910 (compatible alternatives: 43650-0911, 43650-0909), 9 Pins per row (https://www.molex.com/pdm_docs/sd/436500210_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +11 +10 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0915_1x09_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43650-0915 (compatible alternatives: 43650-0916, 43650-0917), 9 Pins per row (http://www.molex.com/pdm_docs/sd/436500215_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +9 +9 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0921_1x09_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43650-0921 (compatible alternatives: 43650-0922, 43650-0923), 9 Pins per row (https://www.molex.com/pdm_docs/sd/436500221_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +9 +9 +Connector_Molex +Molex_Micro-Fit_3.0_43650-0924_1x09-1MP_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43650-0924 (compatible alternatives: 43650-0925, 43650-0926), 9 Pins per row (https://www.molex.com/pdm_docs/sd/436500224_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +11 +10 +Connector_Molex +Molex_Micro-Fit_3.0_43650-1000_1x10_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43650-1000 (compatible alternatives: 43650-1001, 43650-1002), 10 Pins per row (https://www.molex.com/pdm_docs/sd/436500300_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 top entry +0 +10 +10 +Connector_Molex +Molex_Micro-Fit_3.0_43650-1010_1x10-1MP_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43650-1010 (compatible alternatives: 43650-1011, 43650-1009), 10 Pins per row (https://www.molex.com/pdm_docs/sd/436500210_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +12 +11 +Connector_Molex +Molex_Micro-Fit_3.0_43650-1010_1x10-1MP_P3.00mm_Horizontal_PnP +Molex Micro-Fit 3.0 Connector System, 43650-1010 (compatible alternatives: 43650-1011, 43650-1009), 10 Pins per row (https://www.molex.com/pdm_docs/sd/436500210_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +12 +11 +Connector_Molex +Molex_Micro-Fit_3.0_43650-1015_1x10_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43650-1015 (compatible alternatives: 43650-1016, 43650-1017), 10 Pins per row (http://www.molex.com/pdm_docs/sd/436500215_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +10 +10 +Connector_Molex +Molex_Micro-Fit_3.0_43650-1021_1x10_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43650-1021 (compatible alternatives: 43650-1022, 43650-1023), 10 Pins per row (https://www.molex.com/pdm_docs/sd/436500221_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +10 +10 +Connector_Molex +Molex_Micro-Fit_3.0_43650-1024_1x10-1MP_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43650-1024 (compatible alternatives: 43650-1025, 43650-1026), 10 Pins per row (https://www.molex.com/pdm_docs/sd/436500224_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +12 +11 +Connector_Molex +Molex_Micro-Fit_3.0_43650-1100_1x11_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43650-1100 (compatible alternatives: 43650-1101, 43650-1102), 11 Pins per row (https://www.molex.com/pdm_docs/sd/436500300_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 top entry +0 +11 +11 +Connector_Molex +Molex_Micro-Fit_3.0_43650-1110_1x11-1MP_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43650-1110 (compatible alternatives: 43650-1111, 43650-1109), 11 Pins per row (https://www.molex.com/pdm_docs/sd/436500210_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +13 +12 +Connector_Molex +Molex_Micro-Fit_3.0_43650-1110_1x11-1MP_P3.00mm_Horizontal_PnP +Molex Micro-Fit 3.0 Connector System, 43650-1110 (compatible alternatives: 43650-1111, 43650-1109), 11 Pins per row (https://www.molex.com/pdm_docs/sd/436500210_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +13 +12 +Connector_Molex +Molex_Micro-Fit_3.0_43650-1115_1x11_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43650-1115 (compatible alternatives: 43650-1116, 43650-1117), 11 Pins per row (http://www.molex.com/pdm_docs/sd/436500215_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +11 +11 +Connector_Molex +Molex_Micro-Fit_3.0_43650-1121_1x11_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43650-1121 (compatible alternatives: 43650-1122, 43650-1123), 11 Pins per row (https://www.molex.com/pdm_docs/sd/436500221_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +11 +11 +Connector_Molex +Molex_Micro-Fit_3.0_43650-1124_1x11-1MP_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43650-1124 (compatible alternatives: 43650-1125, 43650-1126), 11 Pins per row (https://www.molex.com/pdm_docs/sd/436500224_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +13 +12 +Connector_Molex +Molex_Micro-Fit_3.0_43650-1200_1x12_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43650-1200 (compatible alternatives: 43650-1201, 43650-1202), 12 Pins per row (https://www.molex.com/pdm_docs/sd/436500300_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 top entry +0 +12 +12 +Connector_Molex +Molex_Micro-Fit_3.0_43650-1210_1x12-1MP_P3.00mm_Horizontal +Molex Micro-Fit 3.0 Connector System, 43650-1210 (compatible alternatives: 43650-1211, 43650-1209), 12 Pins per row (https://www.molex.com/pdm_docs/sd/436500210_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +14 +13 +Connector_Molex +Molex_Micro-Fit_3.0_43650-1210_1x12-1MP_P3.00mm_Horizontal_PnP +Molex Micro-Fit 3.0 Connector System, 43650-1210 (compatible alternatives: 43650-1211, 43650-1209), 12 Pins per row (https://www.molex.com/pdm_docs/sd/436500210_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 horizontal +0 +14 +13 +Connector_Molex +Molex_Micro-Fit_3.0_43650-1215_1x12_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43650-1215 (compatible alternatives: 43650-1216, 43650-1217), 12 Pins per row (http://www.molex.com/pdm_docs/sd/436500215_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +12 +12 +Connector_Molex +Molex_Micro-Fit_3.0_43650-1221_1x12_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43650-1221 (compatible alternatives: 43650-1222, 43650-1223), 12 Pins per row (https://www.molex.com/pdm_docs/sd/436500221_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +12 +12 +Connector_Molex +Molex_Micro-Fit_3.0_43650-1224_1x12-1MP_P3.00mm_Vertical +Molex Micro-Fit 3.0 Connector System, 43650-1224 (compatible alternatives: 43650-1225, 43650-1226), 12 Pins per row (https://www.molex.com/pdm_docs/sd/436500224_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Fit_3.0 vertical +0 +14 +13 +Connector_Molex +Molex_Micro-Latch_53253-0270_1x02_P2.00mm_Vertical +Molex Micro-Latch Wire-to-Board Connector System, 53253-0270 (compatible alternatives: 53253-0250), 2 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Latch side entry +0 +2 +2 +Connector_Molex +Molex_Micro-Latch_53253-0370_1x03_P2.00mm_Vertical +Molex Micro-Latch Wire-to-Board Connector System, 53253-0370 (compatible alternatives: 53253-0350), 3 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Latch side entry +0 +3 +3 +Connector_Molex +Molex_Micro-Latch_53253-0470_1x04_P2.00mm_Vertical +Molex Micro-Latch Wire-to-Board Connector System, 53253-0470 (compatible alternatives: 53253-0450), 4 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Latch side entry +0 +4 +4 +Connector_Molex +Molex_Micro-Latch_53253-0570_1x05_P2.00mm_Vertical +Molex Micro-Latch Wire-to-Board Connector System, 53253-0570 (compatible alternatives: 53253-0550), 5 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Latch side entry +0 +5 +5 +Connector_Molex +Molex_Micro-Latch_53253-0670_1x06_P2.00mm_Vertical +Molex Micro-Latch Wire-to-Board Connector System, 53253-0670 (compatible alternatives: 53253-0650), 6 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Latch side entry +0 +6 +6 +Connector_Molex +Molex_Micro-Latch_53253-0770_1x07_P2.00mm_Vertical +Molex Micro-Latch Wire-to-Board Connector System, 53253-0770 (compatible alternatives: 53253-0750), 7 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Latch side entry +0 +7 +7 +Connector_Molex +Molex_Micro-Latch_53253-0870_1x08_P2.00mm_Vertical +Molex Micro-Latch Wire-to-Board Connector System, 53253-0870 (compatible alternatives: 53253-0850), 8 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Latch side entry +0 +8 +8 +Connector_Molex +Molex_Micro-Latch_53253-0970_1x09_P2.00mm_Vertical +Molex Micro-Latch Wire-to-Board Connector System, 53253-0970 (compatible alternatives: 53253-0950), 9 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Latch side entry +0 +9 +9 +Connector_Molex +Molex_Micro-Latch_53253-1070_1x10_P2.00mm_Vertical +Molex Micro-Latch Wire-to-Board Connector System, 53253-1070 (compatible alternatives: 53253-1050), 10 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Latch side entry +0 +10 +10 +Connector_Molex +Molex_Micro-Latch_53253-1170_1x11_P2.00mm_Vertical +Molex Micro-Latch Wire-to-Board Connector System, 53253-1170 (compatible alternatives: 53253-1150), 11 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Latch side entry +0 +11 +11 +Connector_Molex +Molex_Micro-Latch_53253-1270_1x12_P2.00mm_Vertical +Molex Micro-Latch Wire-to-Board Connector System, 53253-1270 (compatible alternatives: 53253-1250), 12 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Latch side entry +0 +12 +12 +Connector_Molex +Molex_Micro-Latch_53253-1370_1x13_P2.00mm_Vertical +Molex Micro-Latch Wire-to-Board Connector System, 53253-1370 (compatible alternatives: 53253-1350), 13 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Latch side entry +0 +13 +13 +Connector_Molex +Molex_Micro-Latch_53253-1470_1x14_P2.00mm_Vertical +Molex Micro-Latch Wire-to-Board Connector System, 53253-1470 (compatible alternatives: 53253-1450), 14 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Latch side entry +0 +14 +14 +Connector_Molex +Molex_Micro-Latch_53253-1570_1x15_P2.00mm_Vertical +Molex Micro-Latch Wire-to-Board Connector System, 53253-1570 (compatible alternatives: 53253-1550), 15 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Latch side entry +0 +15 +15 +Connector_Molex +Molex_Micro-Latch_53254-0270_1x02_P2.00mm_Horizontal +Molex Micro-Latch Wire-to-Board Connector System, 53254-0270 (compatible alternatives: 53254-0250), 2 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Latch top entry +0 +2 +2 +Connector_Molex +Molex_Micro-Latch_53254-0370_1x03_P2.00mm_Horizontal +Molex Micro-Latch Wire-to-Board Connector System, 53254-0370 (compatible alternatives: 53254-0350), 3 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Latch top entry +0 +3 +3 +Connector_Molex +Molex_Micro-Latch_53254-0470_1x04_P2.00mm_Horizontal +Molex Micro-Latch Wire-to-Board Connector System, 53254-0470 (compatible alternatives: 53254-0450), 4 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Latch top entry +0 +4 +4 +Connector_Molex +Molex_Micro-Latch_53254-0570_1x05_P2.00mm_Horizontal +Molex Micro-Latch Wire-to-Board Connector System, 53254-0570 (compatible alternatives: 53254-0550), 5 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Latch top entry +0 +5 +5 +Connector_Molex +Molex_Micro-Latch_53254-0670_1x06_P2.00mm_Horizontal +Molex Micro-Latch Wire-to-Board Connector System, 53254-0670 (compatible alternatives: 53254-0650), 6 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Latch top entry +0 +6 +6 +Connector_Molex +Molex_Micro-Latch_53254-0770_1x07_P2.00mm_Horizontal +Molex Micro-Latch Wire-to-Board Connector System, 53254-0770 (compatible alternatives: 53254-0750), 7 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Latch top entry +0 +7 +7 +Connector_Molex +Molex_Micro-Latch_53254-0870_1x08_P2.00mm_Horizontal +Molex Micro-Latch Wire-to-Board Connector System, 53254-0870 (compatible alternatives: 53254-0850), 8 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Latch top entry +0 +8 +8 +Connector_Molex +Molex_Micro-Latch_53254-0970_1x09_P2.00mm_Horizontal +Molex Micro-Latch Wire-to-Board Connector System, 53254-0970 (compatible alternatives: 53254-0950), 9 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Latch top entry +0 +9 +9 +Connector_Molex +Molex_Micro-Latch_53254-1070_1x10_P2.00mm_Horizontal +Molex Micro-Latch Wire-to-Board Connector System, 53254-1070 (compatible alternatives: 53254-1050), 10 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Latch top entry +0 +10 +10 +Connector_Molex +Molex_Micro-Latch_53254-1170_1x11_P2.00mm_Horizontal +Molex Micro-Latch Wire-to-Board Connector System, 53254-1170 (compatible alternatives: 53254-1150), 11 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Latch top entry +0 +11 +11 +Connector_Molex +Molex_Micro-Latch_53254-1270_1x12_P2.00mm_Horizontal +Molex Micro-Latch Wire-to-Board Connector System, 53254-1270 (compatible alternatives: 53254-1250), 12 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Latch top entry +0 +12 +12 +Connector_Molex +Molex_Micro-Latch_53254-1370_1x13_P2.00mm_Horizontal +Molex Micro-Latch Wire-to-Board Connector System, 53254-1370 (compatible alternatives: 53254-1350), 13 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Latch top entry +0 +13 +13 +Connector_Molex +Molex_Micro-Latch_53254-1470_1x14_P2.00mm_Horizontal +Molex Micro-Latch Wire-to-Board Connector System, 53254-1470 (compatible alternatives: 53254-1450), 14 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Latch top entry +0 +14 +14 +Connector_Molex +Molex_Micro-Latch_53254-1570_1x15_P2.00mm_Horizontal +Molex Micro-Latch Wire-to-Board Connector System, 53254-1570 (compatible alternatives: 53254-1550), 15 Pins per row (http://www.molex.com/pdm_docs/sd/532530770_sd.pdf), generated with kicad-footprint-generator +connector Molex Micro-Latch top entry +0 +15 +15 +Connector_Molex +Molex_MicroClasp_55932-0210_1x02_P2.00mm_Vertical +Molex MicroClasp Wire-to-Board System, 55932-0210, with PCB locator, 2 Pins (http://www.molex.com/pdm_docs/sd/559320210_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp side entry +0 +2 +2 +Connector_Molex +Molex_MicroClasp_55932-0230_1x02_P2.00mm_Vertical +Molex MicroClasp Wire-to-Board System, 55932-0230, 2 Pins (http://www.molex.com/pdm_docs/sd/559320530_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp side entry +0 +2 +2 +Connector_Molex +Molex_MicroClasp_55932-0310_1x03_P2.00mm_Vertical +Molex MicroClasp Wire-to-Board System, 55932-0310, with PCB locator, 3 Pins (http://www.molex.com/pdm_docs/sd/559320210_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp side entry +0 +3 +3 +Connector_Molex +Molex_MicroClasp_55932-0330_1x03_P2.00mm_Vertical +Molex MicroClasp Wire-to-Board System, 55932-0330, 3 Pins (http://www.molex.com/pdm_docs/sd/559320530_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp side entry +0 +3 +3 +Connector_Molex +Molex_MicroClasp_55932-0410_1x04_P2.00mm_Vertical +Molex MicroClasp Wire-to-Board System, 55932-0410, with PCB locator, 4 Pins (http://www.molex.com/pdm_docs/sd/559320210_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp side entry +0 +4 +4 +Connector_Molex +Molex_MicroClasp_55932-0430_1x04_P2.00mm_Vertical +Molex MicroClasp Wire-to-Board System, 55932-0430, 4 Pins (http://www.molex.com/pdm_docs/sd/559320530_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp side entry +0 +4 +4 +Connector_Molex +Molex_MicroClasp_55932-0510_1x05_P2.00mm_Vertical +Molex MicroClasp Wire-to-Board System, 55932-0510, with PCB locator, 5 Pins (http://www.molex.com/pdm_docs/sd/559320210_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp side entry +0 +5 +5 +Connector_Molex +Molex_MicroClasp_55932-0530_1x05_P2.00mm_Vertical +Molex MicroClasp Wire-to-Board System, 55932-0530, 5 Pins (http://www.molex.com/pdm_docs/sd/559320530_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp side entry +0 +5 +5 +Connector_Molex +Molex_MicroClasp_55932-0610_1x06_P2.00mm_Vertical +Molex MicroClasp Wire-to-Board System, 55932-0610, with PCB locator, 6 Pins (http://www.molex.com/pdm_docs/sd/559320210_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp side entry +0 +6 +6 +Connector_Molex +Molex_MicroClasp_55932-0630_1x06_P2.00mm_Vertical +Molex MicroClasp Wire-to-Board System, 55932-0630, 6 Pins (http://www.molex.com/pdm_docs/sd/559320530_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp side entry +0 +6 +6 +Connector_Molex +Molex_MicroClasp_55932-0710_1x07_P2.00mm_Vertical +Molex MicroClasp Wire-to-Board System, 55932-0710, with PCB locator, 7 Pins (http://www.molex.com/pdm_docs/sd/559320210_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp side entry +0 +7 +7 +Connector_Molex +Molex_MicroClasp_55932-0730_1x07_P2.00mm_Vertical +Molex MicroClasp Wire-to-Board System, 55932-0730, 7 Pins (http://www.molex.com/pdm_docs/sd/559320530_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp side entry +0 +7 +7 +Connector_Molex +Molex_MicroClasp_55932-0810_1x08_P2.00mm_Vertical +Molex MicroClasp Wire-to-Board System, 55932-0810, with PCB locator, 8 Pins (http://www.molex.com/pdm_docs/sd/559320210_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp side entry +0 +8 +8 +Connector_Molex +Molex_MicroClasp_55932-0830_1x08_P2.00mm_Vertical +Molex MicroClasp Wire-to-Board System, 55932-0830, 8 Pins (http://www.molex.com/pdm_docs/sd/559320530_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp side entry +0 +8 +8 +Connector_Molex +Molex_MicroClasp_55932-0910_1x09_P2.00mm_Vertical +Molex MicroClasp Wire-to-Board System, 55932-0910, with PCB locator, 9 Pins (http://www.molex.com/pdm_docs/sd/559320210_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp side entry +0 +9 +9 +Connector_Molex +Molex_MicroClasp_55932-0930_1x09_P2.00mm_Vertical +Molex MicroClasp Wire-to-Board System, 55932-0930, 9 Pins (http://www.molex.com/pdm_docs/sd/559320530_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp side entry +0 +9 +9 +Connector_Molex +Molex_MicroClasp_55932-1010_1x10_P2.00mm_Vertical +Molex MicroClasp Wire-to-Board System, 55932-1010, with PCB locator, 10 Pins (http://www.molex.com/pdm_docs/sd/559320210_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp side entry +0 +10 +10 +Connector_Molex +Molex_MicroClasp_55932-1030_1x10_P2.00mm_Vertical +Molex MicroClasp Wire-to-Board System, 55932-1030, 10 Pins (http://www.molex.com/pdm_docs/sd/559320530_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp side entry +0 +10 +10 +Connector_Molex +Molex_MicroClasp_55932-1110_1x11_P2.00mm_Vertical +Molex MicroClasp Wire-to-Board System, 55932-1110, with PCB locator, 11 Pins (http://www.molex.com/pdm_docs/sd/559320210_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp side entry +0 +11 +11 +Connector_Molex +Molex_MicroClasp_55932-1130_1x11_P2.00mm_Vertical +Molex MicroClasp Wire-to-Board System, 55932-1130, 11 Pins (http://www.molex.com/pdm_docs/sd/559320530_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp side entry +0 +11 +11 +Connector_Molex +Molex_MicroClasp_55932-1210_1x12_P2.00mm_Vertical +Molex MicroClasp Wire-to-Board System, 55932-1210, with PCB locator, 12 Pins (http://www.molex.com/pdm_docs/sd/559320210_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp side entry +0 +12 +12 +Connector_Molex +Molex_MicroClasp_55932-1230_1x12_P2.00mm_Vertical +Molex MicroClasp Wire-to-Board System, 55932-1230, 12 Pins (http://www.molex.com/pdm_docs/sd/559320530_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp side entry +0 +12 +12 +Connector_Molex +Molex_MicroClasp_55932-1310_1x13_P2.00mm_Vertical +Molex MicroClasp Wire-to-Board System, 55932-1310, with PCB locator, 13 Pins (http://www.molex.com/pdm_docs/sd/559320210_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp side entry +0 +13 +13 +Connector_Molex +Molex_MicroClasp_55932-1330_1x13_P2.00mm_Vertical +Molex MicroClasp Wire-to-Board System, 55932-1330, 13 Pins (http://www.molex.com/pdm_docs/sd/559320530_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp side entry +0 +13 +13 +Connector_Molex +Molex_MicroClasp_55932-1410_1x14_P2.00mm_Vertical +Molex MicroClasp Wire-to-Board System, 55932-1410, with PCB locator, 14 Pins (http://www.molex.com/pdm_docs/sd/559320210_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp side entry +0 +14 +14 +Connector_Molex +Molex_MicroClasp_55932-1430_1x14_P2.00mm_Vertical +Molex MicroClasp Wire-to-Board System, 55932-1430, 14 Pins (http://www.molex.com/pdm_docs/sd/559320530_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp side entry +0 +14 +14 +Connector_Molex +Molex_MicroClasp_55932-1510_1x15_P2.00mm_Vertical +Molex MicroClasp Wire-to-Board System, 55932-1510, with PCB locator, 15 Pins (http://www.molex.com/pdm_docs/sd/559320210_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp side entry +0 +15 +15 +Connector_Molex +Molex_MicroClasp_55932-1530_1x15_P2.00mm_Vertical +Molex MicroClasp Wire-to-Board System, 55932-1530, 15 Pins (http://www.molex.com/pdm_docs/sd/559320530_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp side entry +0 +15 +15 +Connector_Molex +Molex_MicroClasp_55935-0210_1x02_P2.00mm_Horizontal +Molex MicroClasp Wire-to-Board System, 55935-0210, with PCB locator, 2 Pins (http://www.molex.com/pdm_docs/sd/559350210_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp horizontal +0 +2 +2 +Connector_Molex +Molex_MicroClasp_55935-0230_1x02_P2.00mm_Horizontal +Molex MicroClasp Wire-to-Board System, 55935-0230, 2 Pins (http://www.molex.com/pdm_docs/sd/559350530_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp horizontal +0 +2 +2 +Connector_Molex +Molex_MicroClasp_55935-0310_1x03_P2.00mm_Horizontal +Molex MicroClasp Wire-to-Board System, 55935-0310, with PCB locator, 3 Pins (http://www.molex.com/pdm_docs/sd/559350210_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp horizontal +0 +3 +3 +Connector_Molex +Molex_MicroClasp_55935-0330_1x03_P2.00mm_Horizontal +Molex MicroClasp Wire-to-Board System, 55935-0330, 3 Pins (http://www.molex.com/pdm_docs/sd/559350530_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp horizontal +0 +3 +3 +Connector_Molex +Molex_MicroClasp_55935-0410_1x04_P2.00mm_Horizontal +Molex MicroClasp Wire-to-Board System, 55935-0410, with PCB locator, 4 Pins (http://www.molex.com/pdm_docs/sd/559350210_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp horizontal +0 +4 +4 +Connector_Molex +Molex_MicroClasp_55935-0430_1x04_P2.00mm_Horizontal +Molex MicroClasp Wire-to-Board System, 55935-0430, 4 Pins (http://www.molex.com/pdm_docs/sd/559350530_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp horizontal +0 +4 +4 +Connector_Molex +Molex_MicroClasp_55935-0510_1x05_P2.00mm_Horizontal +Molex MicroClasp Wire-to-Board System, 55935-0510, with PCB locator, 5 Pins (http://www.molex.com/pdm_docs/sd/559350210_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp horizontal +0 +5 +5 +Connector_Molex +Molex_MicroClasp_55935-0530_1x05_P2.00mm_Horizontal +Molex MicroClasp Wire-to-Board System, 55935-0530, 5 Pins (http://www.molex.com/pdm_docs/sd/559350530_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp horizontal +0 +5 +5 +Connector_Molex +Molex_MicroClasp_55935-0610_1x06_P2.00mm_Horizontal +Molex MicroClasp Wire-to-Board System, 55935-0610, with PCB locator, 6 Pins (http://www.molex.com/pdm_docs/sd/559350210_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp horizontal +0 +6 +6 +Connector_Molex +Molex_MicroClasp_55935-0630_1x06_P2.00mm_Horizontal +Molex MicroClasp Wire-to-Board System, 55935-0630, 6 Pins (http://www.molex.com/pdm_docs/sd/559350530_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp horizontal +0 +6 +6 +Connector_Molex +Molex_MicroClasp_55935-0710_1x07_P2.00mm_Horizontal +Molex MicroClasp Wire-to-Board System, 55935-0710, with PCB locator, 7 Pins (http://www.molex.com/pdm_docs/sd/559350210_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp horizontal +0 +7 +7 +Connector_Molex +Molex_MicroClasp_55935-0730_1x07_P2.00mm_Horizontal +Molex MicroClasp Wire-to-Board System, 55935-0730, 7 Pins (http://www.molex.com/pdm_docs/sd/559350530_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp horizontal +0 +7 +7 +Connector_Molex +Molex_MicroClasp_55935-0810_1x08_P2.00mm_Horizontal +Molex MicroClasp Wire-to-Board System, 55935-0810, with PCB locator, 8 Pins (http://www.molex.com/pdm_docs/sd/559350210_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp horizontal +0 +8 +8 +Connector_Molex +Molex_MicroClasp_55935-0830_1x08_P2.00mm_Horizontal +Molex MicroClasp Wire-to-Board System, 55935-0830, 8 Pins (http://www.molex.com/pdm_docs/sd/559350530_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp horizontal +0 +8 +8 +Connector_Molex +Molex_MicroClasp_55935-0910_1x09_P2.00mm_Horizontal +Molex MicroClasp Wire-to-Board System, 55935-0910, with PCB locator, 9 Pins (http://www.molex.com/pdm_docs/sd/559350210_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp horizontal +0 +9 +9 +Connector_Molex +Molex_MicroClasp_55935-0930_1x09_P2.00mm_Horizontal +Molex MicroClasp Wire-to-Board System, 55935-0930, 9 Pins (http://www.molex.com/pdm_docs/sd/559350530_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp horizontal +0 +9 +9 +Connector_Molex +Molex_MicroClasp_55935-1010_1x10_P2.00mm_Horizontal +Molex MicroClasp Wire-to-Board System, 55935-1010, with PCB locator, 10 Pins (http://www.molex.com/pdm_docs/sd/559350210_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp horizontal +0 +10 +10 +Connector_Molex +Molex_MicroClasp_55935-1030_1x10_P2.00mm_Horizontal +Molex MicroClasp Wire-to-Board System, 55935-1030, 10 Pins (http://www.molex.com/pdm_docs/sd/559350530_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp horizontal +0 +10 +10 +Connector_Molex +Molex_MicroClasp_55935-1110_1x11_P2.00mm_Horizontal +Molex MicroClasp Wire-to-Board System, 55935-1110, with PCB locator, 11 Pins (http://www.molex.com/pdm_docs/sd/559350210_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp horizontal +0 +11 +11 +Connector_Molex +Molex_MicroClasp_55935-1130_1x11_P2.00mm_Horizontal +Molex MicroClasp Wire-to-Board System, 55935-1130, 11 Pins (http://www.molex.com/pdm_docs/sd/559350530_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp horizontal +0 +11 +11 +Connector_Molex +Molex_MicroClasp_55935-1210_1x12_P2.00mm_Horizontal +Molex MicroClasp Wire-to-Board System, 55935-1210, with PCB locator, 12 Pins (http://www.molex.com/pdm_docs/sd/559350210_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp horizontal +0 +12 +12 +Connector_Molex +Molex_MicroClasp_55935-1230_1x12_P2.00mm_Horizontal +Molex MicroClasp Wire-to-Board System, 55935-1230, 12 Pins (http://www.molex.com/pdm_docs/sd/559350530_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp horizontal +0 +12 +12 +Connector_Molex +Molex_MicroClasp_55935-1310_1x13_P2.00mm_Horizontal +Molex MicroClasp Wire-to-Board System, 55935-1310, with PCB locator, 13 Pins (http://www.molex.com/pdm_docs/sd/559350210_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp horizontal +0 +13 +13 +Connector_Molex +Molex_MicroClasp_55935-1330_1x13_P2.00mm_Horizontal +Molex MicroClasp Wire-to-Board System, 55935-1330, 13 Pins (http://www.molex.com/pdm_docs/sd/559350530_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp horizontal +0 +13 +13 +Connector_Molex +Molex_MicroClasp_55935-1410_1x14_P2.00mm_Horizontal +Molex MicroClasp Wire-to-Board System, 55935-1410, with PCB locator, 14 Pins (http://www.molex.com/pdm_docs/sd/559350210_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp horizontal +0 +14 +14 +Connector_Molex +Molex_MicroClasp_55935-1430_1x14_P2.00mm_Horizontal +Molex MicroClasp Wire-to-Board System, 55935-1430, 14 Pins (http://www.molex.com/pdm_docs/sd/559350530_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp horizontal +0 +14 +14 +Connector_Molex +Molex_MicroClasp_55935-1510_1x15_P2.00mm_Horizontal +Molex MicroClasp Wire-to-Board System, 55935-1510, with PCB locator, 15 Pins (http://www.molex.com/pdm_docs/sd/559350210_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp horizontal +0 +15 +15 +Connector_Molex +Molex_MicroClasp_55935-1530_1x15_P2.00mm_Horizontal +Molex MicroClasp Wire-to-Board System, 55935-1530, 15 Pins (http://www.molex.com/pdm_docs/sd/559350530_sd.pdf), generated with kicad-footprint-generator +connector Molex MicroClasp horizontal +0 +15 +15 +Connector_Molex +Molex_Mini-Fit_Jr_5566-02A2_2x01_P4.20mm_Vertical +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-02A2, example for new mpn: 39-28-902x, 1 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039289068_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr side entryplastic_peg +0 +2 +2 +Connector_Molex +Molex_Mini-Fit_Jr_5566-02A_2x01_P4.20mm_Vertical +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-02A, example for new mpn: 39-28-x02x, 1 Pins per row, Mounting: (http://www.molex.com/pdm_docs/sd/039281043_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr side entry +0 +2 +2 +Connector_Molex +Molex_Mini-Fit_Jr_5566-04A2_2x02_P4.20mm_Vertical +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-04A2, example for new mpn: 39-28-904x, 2 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039289068_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr side entryplastic_peg +0 +4 +4 +Connector_Molex +Molex_Mini-Fit_Jr_5566-04A_2x02_P4.20mm_Vertical +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-04A, example for new mpn: 39-28-x04x, 2 Pins per row, Mounting: (http://www.molex.com/pdm_docs/sd/039281043_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr side entry +0 +4 +4 +Connector_Molex +Molex_Mini-Fit_Jr_5566-06A2_2x03_P4.20mm_Vertical +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-06A2, example for new mpn: 39-28-906x, 3 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039289068_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr side entryplastic_peg +0 +6 +6 +Connector_Molex +Molex_Mini-Fit_Jr_5566-06A_2x03_P4.20mm_Vertical +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-06A, example for new mpn: 39-28-x06x, 3 Pins per row, Mounting: (http://www.molex.com/pdm_docs/sd/039281043_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr side entry +0 +6 +6 +Connector_Molex +Molex_Mini-Fit_Jr_5566-08A2_2x04_P4.20mm_Vertical +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-08A2, example for new mpn: 39-28-908x, 4 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039289068_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr side entryplastic_peg +0 +8 +8 +Connector_Molex +Molex_Mini-Fit_Jr_5566-08A_2x04_P4.20mm_Vertical +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-08A, example for new mpn: 39-28-x08x, 4 Pins per row, Mounting: (http://www.molex.com/pdm_docs/sd/039281043_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr side entry +0 +8 +8 +Connector_Molex +Molex_Mini-Fit_Jr_5566-10A2_2x05_P4.20mm_Vertical +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-10A2, example for new mpn: 39-28-910x, 5 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039289068_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr side entryplastic_peg +0 +10 +10 +Connector_Molex +Molex_Mini-Fit_Jr_5566-10A_2x05_P4.20mm_Vertical +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-10A, example for new mpn: 39-28-x10x, 5 Pins per row, Mounting: (http://www.molex.com/pdm_docs/sd/039281043_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr side entry +0 +10 +10 +Connector_Molex +Molex_Mini-Fit_Jr_5566-12A2_2x06_P4.20mm_Vertical +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-12A2, example for new mpn: 39-28-912x, 6 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039289068_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr side entryplastic_peg +0 +12 +12 +Connector_Molex +Molex_Mini-Fit_Jr_5566-12A_2x06_P4.20mm_Vertical +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-12A, example for new mpn: 39-28-x12x, 6 Pins per row, Mounting: (http://www.molex.com/pdm_docs/sd/039281043_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr side entry +0 +12 +12 +Connector_Molex +Molex_Mini-Fit_Jr_5566-14A2_2x07_P4.20mm_Vertical +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-14A2, example for new mpn: 39-28-914x, 7 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039289068_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr side entryplastic_peg +0 +14 +14 +Connector_Molex +Molex_Mini-Fit_Jr_5566-14A_2x07_P4.20mm_Vertical +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-14A, example for new mpn: 39-28-x14x, 7 Pins per row, Mounting: (http://www.molex.com/pdm_docs/sd/039281043_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr side entry +0 +14 +14 +Connector_Molex +Molex_Mini-Fit_Jr_5566-16A2_2x08_P4.20mm_Vertical +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-16A2, example for new mpn: 39-28-916x, 8 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039289068_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr side entryplastic_peg +0 +16 +16 +Connector_Molex +Molex_Mini-Fit_Jr_5566-16A_2x08_P4.20mm_Vertical +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-16A, example for new mpn: 39-28-x16x, 8 Pins per row, Mounting: (http://www.molex.com/pdm_docs/sd/039281043_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr side entry +0 +16 +16 +Connector_Molex +Molex_Mini-Fit_Jr_5566-18A2_2x09_P4.20mm_Vertical +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-18A2, example for new mpn: 39-28-918x, 9 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039289068_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr side entryplastic_peg +0 +18 +18 +Connector_Molex +Molex_Mini-Fit_Jr_5566-18A_2x09_P4.20mm_Vertical +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-18A, example for new mpn: 39-28-x18x, 9 Pins per row, Mounting: (http://www.molex.com/pdm_docs/sd/039281043_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr side entry +0 +18 +18 +Connector_Molex +Molex_Mini-Fit_Jr_5566-20A2_2x10_P4.20mm_Vertical +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-20A2, example for new mpn: 39-28-920x, 10 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039289068_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr side entryplastic_peg +0 +20 +20 +Connector_Molex +Molex_Mini-Fit_Jr_5566-20A_2x10_P4.20mm_Vertical +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-20A, example for new mpn: 39-28-x20x, 10 Pins per row, Mounting: (http://www.molex.com/pdm_docs/sd/039281043_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr side entry +0 +20 +20 +Connector_Molex +Molex_Mini-Fit_Jr_5566-22A2_2x11_P4.20mm_Vertical +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-22A2, example for new mpn: 39-28-922x, 11 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039289068_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr side entryplastic_peg +0 +22 +22 +Connector_Molex +Molex_Mini-Fit_Jr_5566-22A_2x11_P4.20mm_Vertical +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-22A, example for new mpn: 39-28-x22x, 11 Pins per row, Mounting: (http://www.molex.com/pdm_docs/sd/039281043_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr side entry +0 +22 +22 +Connector_Molex +Molex_Mini-Fit_Jr_5566-24A2_2x12_P4.20mm_Vertical +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-24A2, example for new mpn: 39-28-924x, 12 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039289068_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr side entryplastic_peg +0 +24 +24 +Connector_Molex +Molex_Mini-Fit_Jr_5566-24A_2x12_P4.20mm_Vertical +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5566-24A, example for new mpn: 39-28-x24x, 12 Pins per row, Mounting: (http://www.molex.com/pdm_docs/sd/039281043_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr side entry +0 +24 +24 +Connector_Molex +Molex_Mini-Fit_Jr_5569-02A1_2x01_P4.20mm_Horizontal +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-02A1, example for new mpn: 39-29-4029, 1 Pins per row, Mounting: PCB Mounting Flange (http://www.molex.com/pdm_docs/sd/039291047_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr top entryscrew_flange +0 +2 +2 +Connector_Molex +Molex_Mini-Fit_Jr_5569-02A2_2x01_P4.20mm_Horizontal +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-02A2, example for new mpn: 39-30-0020, 1 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039300020_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr top entryplastic_peg +0 +2 +2 +Connector_Molex +Molex_Mini-Fit_Jr_5569-04A1_2x02_P4.20mm_Horizontal +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-04A1, example for new mpn: 39-29-4049, 2 Pins per row, Mounting: PCB Mounting Flange (http://www.molex.com/pdm_docs/sd/039291047_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr top entryscrew_flange +0 +4 +4 +Connector_Molex +Molex_Mini-Fit_Jr_5569-04A2_2x02_P4.20mm_Horizontal +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-04A2, example for new mpn: 39-30-0040, 2 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039300020_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr top entryplastic_peg +0 +4 +4 +Connector_Molex +Molex_Mini-Fit_Jr_5569-06A1_2x03_P4.20mm_Horizontal +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-06A1, example for new mpn: 39-29-4069, 3 Pins per row, Mounting: PCB Mounting Flange (http://www.molex.com/pdm_docs/sd/039291047_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr top entryscrew_flange +0 +6 +6 +Connector_Molex +Molex_Mini-Fit_Jr_5569-06A2_2x03_P4.20mm_Horizontal +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-06A2, example for new mpn: 39-30-0060, 3 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039300020_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr top entryplastic_peg +0 +6 +6 +Connector_Molex +Molex_Mini-Fit_Jr_5569-08A1_2x04_P4.20mm_Horizontal +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-08A1, example for new mpn: 39-29-4089, 4 Pins per row, Mounting: PCB Mounting Flange (http://www.molex.com/pdm_docs/sd/039291047_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr top entryscrew_flange +0 +8 +8 +Connector_Molex +Molex_Mini-Fit_Jr_5569-08A2_2x04_P4.20mm_Horizontal +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-08A2, example for new mpn: 39-30-0080, 4 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039300020_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr top entryplastic_peg +0 +8 +8 +Connector_Molex +Molex_Mini-Fit_Jr_5569-10A1_2x05_P4.20mm_Horizontal +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-10A1, example for new mpn: 39-29-4109, 5 Pins per row, Mounting: PCB Mounting Flange (http://www.molex.com/pdm_docs/sd/039291047_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr top entryscrew_flange +0 +10 +10 +Connector_Molex +Molex_Mini-Fit_Jr_5569-10A2_2x05_P4.20mm_Horizontal +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-10A2, example for new mpn: 39-30-0100, 5 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039300020_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr top entryplastic_peg +0 +10 +10 +Connector_Molex +Molex_Mini-Fit_Jr_5569-12A1_2x06_P4.20mm_Horizontal +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-12A1, example for new mpn: 39-29-4129, 6 Pins per row, Mounting: PCB Mounting Flange (http://www.molex.com/pdm_docs/sd/039291047_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr top entryscrew_flange +0 +12 +12 +Connector_Molex +Molex_Mini-Fit_Jr_5569-12A2_2x06_P4.20mm_Horizontal +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-12A2, example for new mpn: 39-30-0120, 6 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039300020_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr top entryplastic_peg +0 +12 +12 +Connector_Molex +Molex_Mini-Fit_Jr_5569-14A1_2x07_P4.20mm_Horizontal +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-14A1, example for new mpn: 39-29-4149, 7 Pins per row, Mounting: PCB Mounting Flange (http://www.molex.com/pdm_docs/sd/039291047_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr top entryscrew_flange +0 +14 +14 +Connector_Molex +Molex_Mini-Fit_Jr_5569-14A2_2x07_P4.20mm_Horizontal +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-14A2, example for new mpn: 39-30-0140, 7 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039300020_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr top entryplastic_peg +0 +14 +14 +Connector_Molex +Molex_Mini-Fit_Jr_5569-16A1_2x08_P4.20mm_Horizontal +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-16A1, example for new mpn: 39-29-4169, 8 Pins per row, Mounting: PCB Mounting Flange (http://www.molex.com/pdm_docs/sd/039291047_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr top entryscrew_flange +0 +16 +16 +Connector_Molex +Molex_Mini-Fit_Jr_5569-16A2_2x08_P4.20mm_Horizontal +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-16A2, example for new mpn: 39-30-0160, 8 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039300020_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr top entryplastic_peg +0 +16 +16 +Connector_Molex +Molex_Mini-Fit_Jr_5569-18A1_2x09_P4.20mm_Horizontal +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-18A1, example for new mpn: 39-29-4189, 9 Pins per row, Mounting: PCB Mounting Flange (http://www.molex.com/pdm_docs/sd/039291047_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr top entryscrew_flange +0 +18 +18 +Connector_Molex +Molex_Mini-Fit_Jr_5569-18A2_2x09_P4.20mm_Horizontal +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-18A2, example for new mpn: 39-30-0180, 9 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039300020_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr top entryplastic_peg +0 +18 +18 +Connector_Molex +Molex_Mini-Fit_Jr_5569-20A1_2x10_P4.20mm_Horizontal +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-20A1, example for new mpn: 39-29-4209, 10 Pins per row, Mounting: PCB Mounting Flange (http://www.molex.com/pdm_docs/sd/039291047_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr top entryscrew_flange +0 +20 +20 +Connector_Molex +Molex_Mini-Fit_Jr_5569-20A2_2x10_P4.20mm_Horizontal +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-20A2, example for new mpn: 39-30-0200, 10 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039300020_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr top entryplastic_peg +0 +20 +20 +Connector_Molex +Molex_Mini-Fit_Jr_5569-22A1_2x11_P4.20mm_Horizontal +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-22A1, example for new mpn: 39-29-4229, 11 Pins per row, Mounting: PCB Mounting Flange (http://www.molex.com/pdm_docs/sd/039291047_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr top entryscrew_flange +0 +22 +22 +Connector_Molex +Molex_Mini-Fit_Jr_5569-22A2_2x11_P4.20mm_Horizontal +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-22A2, example for new mpn: 39-30-0220, 11 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039300020_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr top entryplastic_peg +0 +22 +22 +Connector_Molex +Molex_Mini-Fit_Jr_5569-24A1_2x12_P4.20mm_Horizontal +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-24A1, example for new mpn: 39-29-4249, 12 Pins per row, Mounting: PCB Mounting Flange (http://www.molex.com/pdm_docs/sd/039291047_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr top entryscrew_flange +0 +24 +24 +Connector_Molex +Molex_Mini-Fit_Jr_5569-24A2_2x12_P4.20mm_Horizontal +Molex Mini-Fit Jr. Power Connectors, old mpn/engineering number: 5569-24A2, example for new mpn: 39-30-0240, 12 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039300020_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Jr top entryplastic_peg +0 +24 +24 +Connector_Molex +Molex_Mini-Fit_Sr_42819-22XX_1x02_P10.00mm_Vertical +Molex Mini-Fit Sr. Power Connectors, 42819-22XX, 2 Pins per row (http://www.molex.com/pdm_docs/sd/428192214_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Sr side entry +0 +6 +2 +Connector_Molex +Molex_Mini-Fit_Sr_42819-22XX_1x02_P10.00mm_Vertical_ThermalVias +Molex Mini-Fit Sr. Power Connectors, 42819-22XX, With thermal vias in pads, 2 Pins per row (http://www.molex.com/pdm_docs/sd/428192214_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Sr side entry +0 +32 +2 +Connector_Molex +Molex_Mini-Fit_Sr_42819-32XX_1x03_P10.00mm_Vertical +Molex Mini-Fit Sr. Power Connectors, 42819-32XX, 3 Pins per row (http://www.molex.com/pdm_docs/sd/428192214_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Sr side entry +0 +8 +3 +Connector_Molex +Molex_Mini-Fit_Sr_42819-32XX_1x03_P10.00mm_Vertical_ThermalVias +Molex Mini-Fit Sr. Power Connectors, 42819-32XX, With thermal vias in pads, 3 Pins per row (http://www.molex.com/pdm_docs/sd/428192214_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Sr side entry +0 +47 +3 +Connector_Molex +Molex_Mini-Fit_Sr_42819-42XX_1x04_P10.00mm_Vertical +Molex Mini-Fit Sr. Power Connectors, 42819-42XX, 4 Pins per row (http://www.molex.com/pdm_docs/sd/428192214_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Sr side entry +0 +10 +4 +Connector_Molex +Molex_Mini-Fit_Sr_42819-42XX_1x04_P10.00mm_Vertical_ThermalVias +Molex Mini-Fit Sr. Power Connectors, 42819-42XX, With thermal vias in pads, 4 Pins per row (http://www.molex.com/pdm_docs/sd/428192214_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Sr side entry +0 +62 +4 +Connector_Molex +Molex_Mini-Fit_Sr_42819-52XX_1x05_P10.00mm_Vertical +Molex Mini-Fit Sr. Power Connectors, 42819-52XX, 5 Pins per row (http://www.molex.com/pdm_docs/sd/428192214_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Sr side entry +0 +12 +5 +Connector_Molex +Molex_Mini-Fit_Sr_42819-52XX_1x05_P10.00mm_Vertical_ThermalVias +Molex Mini-Fit Sr. Power Connectors, 42819-52XX, With thermal vias in pads, 5 Pins per row (http://www.molex.com/pdm_docs/sd/428192214_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Sr side entry +0 +77 +5 +Connector_Molex +Molex_Mini-Fit_Sr_42819-62XX_1x06_P10.00mm_Vertical +Molex Mini-Fit Sr. Power Connectors, 42819-62XX, 6 Pins per row (http://www.molex.com/pdm_docs/sd/428192214_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Sr side entry +0 +14 +6 +Connector_Molex +Molex_Mini-Fit_Sr_42819-62XX_1x06_P10.00mm_Vertical_ThermalVias +Molex Mini-Fit Sr. Power Connectors, 42819-62XX, With thermal vias in pads, 6 Pins per row (http://www.molex.com/pdm_docs/sd/428192214_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Sr side entry +0 +92 +6 +Connector_Molex +Molex_Mini-Fit_Sr_42820-22XX_1x02_P10.00mm_Horizontal +Molex Mini-Fit Sr. Power Connectors, 42820-22XX, 2 Pins per row (http://www.molex.com/pdm_docs/sd/428202214_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Sr top entry +0 +6 +2 +Connector_Molex +Molex_Mini-Fit_Sr_42820-22XX_1x02_P10.00mm_Horizontal_ThermalVias +Molex Mini-Fit Sr. Power Connectors, 42820-22XX, With thermal vias in pads, 2 Pins per row (http://www.molex.com/pdm_docs/sd/428202214_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Sr top entry +0 +32 +2 +Connector_Molex +Molex_Mini-Fit_Sr_42820-32XX_1x03_P10.00mm_Horizontal +Molex Mini-Fit Sr. Power Connectors, 42820-32XX, 3 Pins per row (http://www.molex.com/pdm_docs/sd/428202214_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Sr top entry +0 +8 +3 +Connector_Molex +Molex_Mini-Fit_Sr_42820-32XX_1x03_P10.00mm_Horizontal_ThermalVias +Molex Mini-Fit Sr. Power Connectors, 42820-32XX, With thermal vias in pads, 3 Pins per row (http://www.molex.com/pdm_docs/sd/428202214_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Sr top entry +0 +47 +3 +Connector_Molex +Molex_Mini-Fit_Sr_42820-42XX_1x04_P10.00mm_Horizontal +Molex Mini-Fit Sr. Power Connectors, 42820-42XX, 4 Pins per row (http://www.molex.com/pdm_docs/sd/428202214_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Sr top entry +0 +10 +4 +Connector_Molex +Molex_Mini-Fit_Sr_42820-42XX_1x04_P10.00mm_Horizontal_ThermalVias +Molex Mini-Fit Sr. Power Connectors, 42820-42XX, With thermal vias in pads, 4 Pins per row (http://www.molex.com/pdm_docs/sd/428202214_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Sr top entry +0 +62 +4 +Connector_Molex +Molex_Mini-Fit_Sr_42820-52XX_1x05_P10.00mm_Horizontal +Molex Mini-Fit Sr. Power Connectors, 42820-52XX, 5 Pins per row (http://www.molex.com/pdm_docs/sd/428202214_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Sr top entry +0 +12 +5 +Connector_Molex +Molex_Mini-Fit_Sr_42820-52XX_1x05_P10.00mm_Horizontal_ThermalVias +Molex Mini-Fit Sr. Power Connectors, 42820-52XX, With thermal vias in pads, 5 Pins per row (http://www.molex.com/pdm_docs/sd/428202214_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Sr top entry +0 +77 +5 +Connector_Molex +Molex_Mini-Fit_Sr_42820-62XX_1x06_P10.00mm_Horizontal +Molex Mini-Fit Sr. Power Connectors, 42820-62XX, 6 Pins per row (http://www.molex.com/pdm_docs/sd/428202214_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Sr top entry +0 +14 +6 +Connector_Molex +Molex_Mini-Fit_Sr_42820-62XX_1x06_P10.00mm_Horizontal_ThermalVias +Molex Mini-Fit Sr. Power Connectors, 42820-62XX, With thermal vias in pads, 6 Pins per row (http://www.molex.com/pdm_docs/sd/428202214_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Sr top entry +0 +92 +6 +Connector_Molex +Molex_Mini-Fit_Sr_43915-xx06_2x03_P10.00mm_Vertical +Molex Mini-Fit Sr. Power Connectors, 43915-xx06, 3 Pins per row (http://www.molex.com/pdm_docs/sd/439151404_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Sr side entry +0 +14 +6 +Connector_Molex +Molex_Mini-Fit_Sr_43915-xx06_2x03_P10.00mm_Vertical_ThermalVias +Molex Mini-Fit Sr. Power Connectors, 43915-xx06, With thermal vias in pads, 3 Pins per row (http://www.molex.com/pdm_docs/sd/439151404_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Sr side entry +0 +92 +6 +Connector_Molex +Molex_Mini-Fit_Sr_43915-xx08_2x04_P10.00mm_Vertical +Molex Mini-Fit Sr. Power Connectors, 43915-xx08, 4 Pins per row (http://www.molex.com/pdm_docs/sd/439151404_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Sr side entry +0 +18 +8 +Connector_Molex +Molex_Mini-Fit_Sr_43915-xx08_2x04_P10.00mm_Vertical_ThermalVias +Molex Mini-Fit Sr. Power Connectors, 43915-xx08, With thermal vias in pads, 4 Pins per row (http://www.molex.com/pdm_docs/sd/439151404_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Sr side entry +0 +122 +8 +Connector_Molex +Molex_Mini-Fit_Sr_43915-xx10_2x05_P10.00mm_Vertical +Molex Mini-Fit Sr. Power Connectors, 43915-xx10, 5 Pins per row (http://www.molex.com/pdm_docs/sd/439151404_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Sr side entry +0 +22 +10 +Connector_Molex +Molex_Mini-Fit_Sr_43915-xx10_2x05_P10.00mm_Vertical_ThermalVias +Molex Mini-Fit Sr. Power Connectors, 43915-xx10, With thermal vias in pads, 5 Pins per row (http://www.molex.com/pdm_docs/sd/439151404_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Sr side entry +0 +152 +10 +Connector_Molex +Molex_Mini-Fit_Sr_43915-xx12_2x06_P10.00mm_Vertical +Molex Mini-Fit Sr. Power Connectors, 43915-xx12, 6 Pins per row (http://www.molex.com/pdm_docs/sd/439151404_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Sr side entry +0 +26 +12 +Connector_Molex +Molex_Mini-Fit_Sr_43915-xx12_2x06_P10.00mm_Vertical_ThermalVias +Molex Mini-Fit Sr. Power Connectors, 43915-xx12, With thermal vias in pads, 6 Pins per row (http://www.molex.com/pdm_docs/sd/439151404_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Sr side entry +0 +182 +12 +Connector_Molex +Molex_Mini-Fit_Sr_43915-xx14_2x07_P10.00mm_Vertical +Molex Mini-Fit Sr. Power Connectors, 43915-xx14, 7 Pins per row (http://www.molex.com/pdm_docs/sd/439151404_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Sr side entry +0 +30 +14 +Connector_Molex +Molex_Mini-Fit_Sr_43915-xx14_2x07_P10.00mm_Vertical_ThermalVias +Molex Mini-Fit Sr. Power Connectors, 43915-xx14, With thermal vias in pads, 7 Pins per row (http://www.molex.com/pdm_docs/sd/439151404_sd.pdf), generated with kicad-footprint-generator +connector Molex Mini-Fit_Sr side entry +0 +212 +14 +Connector_Molex +Molex_Nano-Fit_105309-xx02_1x02_P2.50mm_Vertical +Molex Nano-Fit Power Connectors, 105309-xx02, 2 Pins per row (http://www.molex.com/pdm_docs/sd/1053091203_sd.pdf), generated with kicad-footprint-generator +connector Molex Nano-Fit side entry +0 +2 +2 +Connector_Molex +Molex_Nano-Fit_105309-xx03_1x03_P2.50mm_Vertical +Molex Nano-Fit Power Connectors, 105309-xx03, 3 Pins per row (http://www.molex.com/pdm_docs/sd/1053091203_sd.pdf), generated with kicad-footprint-generator +connector Molex Nano-Fit side entry +0 +3 +3 +Connector_Molex +Molex_Nano-Fit_105309-xx04_1x04_P2.50mm_Vertical +Molex Nano-Fit Power Connectors, 105309-xx04, 4 Pins per row (http://www.molex.com/pdm_docs/sd/1053091203_sd.pdf), generated with kicad-footprint-generator +connector Molex Nano-Fit side entry +0 +4 +4 +Connector_Molex +Molex_Nano-Fit_105309-xx05_1x05_P2.50mm_Vertical +Molex Nano-Fit Power Connectors, 105309-xx05, 5 Pins per row (http://www.molex.com/pdm_docs/sd/1053091203_sd.pdf), generated with kicad-footprint-generator +connector Molex Nano-Fit side entry +0 +5 +5 +Connector_Molex +Molex_Nano-Fit_105309-xx06_1x06_P2.50mm_Vertical +Molex Nano-Fit Power Connectors, 105309-xx06, 6 Pins per row (http://www.molex.com/pdm_docs/sd/1053091203_sd.pdf), generated with kicad-footprint-generator +connector Molex Nano-Fit side entry +0 +6 +6 +Connector_Molex +Molex_Nano-Fit_105309-xx07_1x07_P2.50mm_Vertical +Molex Nano-Fit Power Connectors, 105309-xx07, 7 Pins per row (http://www.molex.com/pdm_docs/sd/1053091203_sd.pdf), generated with kicad-footprint-generator +connector Molex Nano-Fit side entry +0 +7 +7 +Connector_Molex +Molex_Nano-Fit_105309-xx08_1x08_P2.50mm_Vertical +Molex Nano-Fit Power Connectors, 105309-xx08, 8 Pins per row (http://www.molex.com/pdm_docs/sd/1053091203_sd.pdf), generated with kicad-footprint-generator +connector Molex Nano-Fit side entry +0 +8 +8 +Connector_Molex +Molex_Nano-Fit_105310-xx04_2x02_P2.50mm_Vertical +Molex Nano-Fit Power Connectors, 105310-xx04, 2 Pins per row (http://www.molex.com/pdm_docs/sd/1053101208_sd.pdf), generated with kicad-footprint-generator +connector Molex Nano-Fit side entry +0 +4 +4 +Connector_Molex +Molex_Nano-Fit_105310-xx06_2x03_P2.50mm_Vertical +Molex Nano-Fit Power Connectors, 105310-xx06, 3 Pins per row (http://www.molex.com/pdm_docs/sd/1053101208_sd.pdf), generated with kicad-footprint-generator +connector Molex Nano-Fit side entry +0 +6 +6 +Connector_Molex +Molex_Nano-Fit_105310-xx08_2x04_P2.50mm_Vertical +Molex Nano-Fit Power Connectors, 105310-xx08, 4 Pins per row (http://www.molex.com/pdm_docs/sd/1053101208_sd.pdf), generated with kicad-footprint-generator +connector Molex Nano-Fit side entry +0 +8 +8 +Connector_Molex +Molex_Nano-Fit_105310-xx10_2x05_P2.50mm_Vertical +Molex Nano-Fit Power Connectors, 105310-xx10, 5 Pins per row (http://www.molex.com/pdm_docs/sd/1053101208_sd.pdf), generated with kicad-footprint-generator +connector Molex Nano-Fit side entry +0 +10 +10 +Connector_Molex +Molex_Nano-Fit_105310-xx12_2x06_P2.50mm_Vertical +Molex Nano-Fit Power Connectors, 105310-xx12, 6 Pins per row (http://www.molex.com/pdm_docs/sd/1053101208_sd.pdf), generated with kicad-footprint-generator +connector Molex Nano-Fit side entry +0 +12 +12 +Connector_Molex +Molex_Nano-Fit_105310-xx14_2x07_P2.50mm_Vertical +Molex Nano-Fit Power Connectors, 105310-xx14, 7 Pins per row (http://www.molex.com/pdm_docs/sd/1053101208_sd.pdf), generated with kicad-footprint-generator +connector Molex Nano-Fit side entry +0 +14 +14 +Connector_Molex +Molex_Nano-Fit_105310-xx16_2x08_P2.50mm_Vertical +Molex Nano-Fit Power Connectors, 105310-xx16, 8 Pins per row (http://www.molex.com/pdm_docs/sd/1053101208_sd.pdf), generated with kicad-footprint-generator +connector Molex Nano-Fit side entry +0 +16 +16 +Connector_Molex +Molex_Nano-Fit_105313-xx02_1x02_P2.50mm_Horizontal +Molex Nano-Fit Power Connectors, 105313-xx02, 2 Pins per row (http://www.molex.com/pdm_docs/sd/1053131208_sd.pdf), generated with kicad-footprint-generator +connector Molex Nano-Fit top entry +0 +2 +2 +Connector_Molex +Molex_Nano-Fit_105313-xx03_1x03_P2.50mm_Horizontal +Molex Nano-Fit Power Connectors, 105313-xx03, 3 Pins per row (http://www.molex.com/pdm_docs/sd/1053131208_sd.pdf), generated with kicad-footprint-generator +connector Molex Nano-Fit top entry +0 +3 +3 +Connector_Molex +Molex_Nano-Fit_105313-xx04_1x04_P2.50mm_Horizontal +Molex Nano-Fit Power Connectors, 105313-xx04, 4 Pins per row (http://www.molex.com/pdm_docs/sd/1053131208_sd.pdf), generated with kicad-footprint-generator +connector Molex Nano-Fit top entry +0 +4 +4 +Connector_Molex +Molex_Nano-Fit_105313-xx05_1x05_P2.50mm_Horizontal +Molex Nano-Fit Power Connectors, 105313-xx05, 5 Pins per row (http://www.molex.com/pdm_docs/sd/1053131208_sd.pdf), generated with kicad-footprint-generator +connector Molex Nano-Fit top entry +0 +5 +5 +Connector_Molex +Molex_Nano-Fit_105313-xx06_1x06_P2.50mm_Horizontal +Molex Nano-Fit Power Connectors, 105313-xx06, 6 Pins per row (http://www.molex.com/pdm_docs/sd/1053131208_sd.pdf), generated with kicad-footprint-generator +connector Molex Nano-Fit top entry +0 +6 +6 +Connector_Molex +Molex_Nano-Fit_105313-xx07_1x07_P2.50mm_Horizontal +Molex Nano-Fit Power Connectors, 105313-xx07, 7 Pins per row (http://www.molex.com/pdm_docs/sd/1053131208_sd.pdf), generated with kicad-footprint-generator +connector Molex Nano-Fit top entry +0 +7 +7 +Connector_Molex +Molex_Nano-Fit_105313-xx08_1x08_P2.50mm_Horizontal +Molex Nano-Fit Power Connectors, 105313-xx08, 8 Pins per row (http://www.molex.com/pdm_docs/sd/1053131208_sd.pdf), generated with kicad-footprint-generator +connector Molex Nano-Fit top entry +0 +8 +8 +Connector_Molex +Molex_Nano-Fit_105314-xx04_2x02_P2.50mm_Horizontal +Molex Nano-Fit Power Connectors, 105314-xx04, 2 Pins per row (http://www.molex.com/pdm_docs/sd/1053141208_sd.pdf), generated with kicad-footprint-generator +connector Molex Nano-Fit top entry +0 +4 +4 +Connector_Molex +Molex_Nano-Fit_105314-xx06_2x03_P2.50mm_Horizontal +Molex Nano-Fit Power Connectors, 105314-xx06, 3 Pins per row (http://www.molex.com/pdm_docs/sd/1053141208_sd.pdf), generated with kicad-footprint-generator +connector Molex Nano-Fit top entry +0 +6 +6 +Connector_Molex +Molex_Nano-Fit_105314-xx08_2x04_P2.50mm_Horizontal +Molex Nano-Fit Power Connectors, 105314-xx08, 4 Pins per row (http://www.molex.com/pdm_docs/sd/1053141208_sd.pdf), generated with kicad-footprint-generator +connector Molex Nano-Fit top entry +0 +8 +8 +Connector_Molex +Molex_Nano-Fit_105314-xx10_2x05_P2.50mm_Horizontal +Molex Nano-Fit Power Connectors, 105314-xx10, 5 Pins per row (http://www.molex.com/pdm_docs/sd/1053141208_sd.pdf), generated with kicad-footprint-generator +connector Molex Nano-Fit top entry +0 +10 +10 +Connector_Molex +Molex_Nano-Fit_105314-xx12_2x06_P2.50mm_Horizontal +Molex Nano-Fit Power Connectors, 105314-xx12, 6 Pins per row (http://www.molex.com/pdm_docs/sd/1053141208_sd.pdf), generated with kicad-footprint-generator +connector Molex Nano-Fit top entry +0 +12 +12 +Connector_Molex +Molex_Nano-Fit_105314-xx14_2x07_P2.50mm_Horizontal +Molex Nano-Fit Power Connectors, 105314-xx14, 7 Pins per row (http://www.molex.com/pdm_docs/sd/1053141208_sd.pdf), generated with kicad-footprint-generator +connector Molex Nano-Fit top entry +0 +14 +14 +Connector_Molex +Molex_Nano-Fit_105314-xx16_2x08_P2.50mm_Horizontal +Molex Nano-Fit Power Connectors, 105314-xx16, 8 Pins per row (http://www.molex.com/pdm_docs/sd/1053141208_sd.pdf), generated with kicad-footprint-generator +connector Molex Nano-Fit top entry +0 +16 +16 +Connector_Molex +Molex_Panelmate_53780-0270_1x02-1MP_P1.25mm_Horizontal +Molex Panelmate series connector, 53780-0270 (), generated with kicad-footprint-generator +connector Molex Panelmate top entry +0 +4 +3 +Connector_Molex +Molex_Panelmate_53780-0370_1x03-1MP_P1.25mm_Horizontal +Molex Panelmate series connector, 53780-0370 (), generated with kicad-footprint-generator +connector Molex Panelmate top entry +0 +5 +4 +Connector_Molex +Molex_Panelmate_53780-0470_1x04-1MP_P1.25mm_Horizontal +Molex Panelmate series connector, 53780-0470 (), generated with kicad-footprint-generator +connector Molex Panelmate top entry +0 +6 +5 +Connector_Molex +Molex_Panelmate_53780-0570_1x05-1MP_P1.25mm_Horizontal +Molex Panelmate series connector, 53780-0570 (), generated with kicad-footprint-generator +connector Molex Panelmate top entry +0 +7 +6 +Connector_Molex +Molex_Panelmate_53780-0670_1x06-1MP_P1.25mm_Horizontal +Molex Panelmate series connector, 53780-0670 (), generated with kicad-footprint-generator +connector Molex Panelmate top entry +0 +8 +7 +Connector_Molex +Molex_Panelmate_53780-0770_1x07-1MP_P1.25mm_Horizontal +Molex Panelmate series connector, 53780-0770 (), generated with kicad-footprint-generator +connector Molex Panelmate top entry +0 +9 +8 +Connector_Molex +Molex_Panelmate_53780-0870_1x08-1MP_P1.25mm_Horizontal +Molex Panelmate series connector, 53780-0870 (), generated with kicad-footprint-generator +connector Molex Panelmate top entry +0 +10 +9 +Connector_Molex +Molex_Panelmate_53780-0970_1x09-1MP_P1.25mm_Horizontal +Molex Panelmate series connector, 53780-0970 (), generated with kicad-footprint-generator +connector Molex Panelmate top entry +0 +11 +10 +Connector_Molex +Molex_Panelmate_53780-1070_1x10-1MP_P1.25mm_Horizontal +Molex Panelmate series connector, 53780-1070 (), generated with kicad-footprint-generator +connector Molex Panelmate top entry +0 +12 +11 +Connector_Molex +Molex_Panelmate_53780-1270_1x12-1MP_P1.25mm_Horizontal +Molex Panelmate series connector, 53780-1270 (), generated with kicad-footprint-generator +connector Molex Panelmate top entry +0 +14 +13 +Connector_Molex +Molex_Panelmate_53780-1470_1x14-1MP_P1.25mm_Horizontal +Molex Panelmate series connector, 53780-1470 (), generated with kicad-footprint-generator +connector Molex Panelmate top entry +0 +16 +15 +Connector_Molex +Molex_Panelmate_53780-1570_1x15-1MP_P1.25mm_Horizontal +Molex Panelmate series connector, 53780-1570 (), generated with kicad-footprint-generator +connector Molex Panelmate top entry +0 +17 +16 +Connector_Molex +Molex_Panelmate_53780-1870_1x18-1MP_P1.25mm_Horizontal +Molex Panelmate series connector, 53780-1870 (), generated with kicad-footprint-generator +connector Molex Panelmate top entry +0 +20 +19 +Connector_Molex +Molex_Panelmate_53780-3070_1x30-1MP_P1.25mm_Horizontal +Molex Panelmate series connector, 53780-3070 (), generated with kicad-footprint-generator +connector Molex Panelmate top entry +0 +32 +31 +Connector_Molex +Molex_Pico-Clasp_202396-0207_1x02-1MP_P1.00mm_Horizontal +Molex Pico-Clasp series connector, 202396-0207 (http://www.molex.com/pdm_docs/sd/2023960207_sd.pdf), generated with kicad-footprint-generator +connector Molex Pico-Clasp top entry +0 +4 +3 +Connector_Molex +Molex_Pico-Clasp_202396-0307_1x03-1MP_P1.00mm_Horizontal +Molex Pico-Clasp series connector, 202396-0307 (http://www.molex.com/pdm_docs/sd/2023960207_sd.pdf), generated with kicad-footprint-generator +connector Molex Pico-Clasp top entry +0 +5 +4 +Connector_Molex +Molex_Pico-Clasp_202396-0407_1x04-1MP_P1.00mm_Horizontal +Molex Pico-Clasp series connector, 202396-0407 (http://www.molex.com/pdm_docs/sd/2023960207_sd.pdf), generated with kicad-footprint-generator +connector Molex Pico-Clasp top entry +0 +6 +5 +Connector_Molex +Molex_Pico-Clasp_202396-0507_1x05-1MP_P1.00mm_Horizontal +Molex Pico-Clasp series connector, 202396-0507 (http://www.molex.com/pdm_docs/sd/2023960207_sd.pdf), generated with kicad-footprint-generator +connector Molex Pico-Clasp top entry +0 +7 +6 +Connector_Molex +Molex_Pico-Clasp_202396-0607_1x06-1MP_P1.00mm_Horizontal +Molex Pico-Clasp series connector, 202396-0607 (http://www.molex.com/pdm_docs/sd/2023960207_sd.pdf), generated with kicad-footprint-generator +connector Molex Pico-Clasp top entry +0 +8 +7 +Connector_Molex +Molex_Pico-Clasp_202396-0707_1x07-1MP_P1.00mm_Horizontal +Molex Pico-Clasp series connector, 202396-0707 (http://www.molex.com/pdm_docs/sd/2023960207_sd.pdf), generated with kicad-footprint-generator +connector Molex Pico-Clasp top entry +0 +9 +8 +Connector_Molex +Molex_Pico-Clasp_202396-0807_1x08-1MP_P1.00mm_Horizontal +Molex Pico-Clasp series connector, 202396-0807 (http://www.molex.com/pdm_docs/sd/2023960207_sd.pdf), generated with kicad-footprint-generator +connector Molex Pico-Clasp top entry +0 +10 +9 +Connector_Molex +Molex_Pico-Clasp_202396-0907_1x09-1MP_P1.00mm_Horizontal +Molex Pico-Clasp series connector, 202396-0907 (http://www.molex.com/pdm_docs/sd/2023960207_sd.pdf), generated with kicad-footprint-generator +connector Molex Pico-Clasp top entry +0 +11 +10 +Connector_Molex +Molex_Pico-Clasp_202396-1007_1x10-1MP_P1.00mm_Horizontal +Molex Pico-Clasp series connector, 202396-1007 (http://www.molex.com/pdm_docs/sd/2023960207_sd.pdf), generated with kicad-footprint-generator +connector Molex Pico-Clasp top entry +0 +12 +11 +Connector_Molex +Molex_Pico-Clasp_202396-1107_1x11-1MP_P1.00mm_Horizontal +Molex Pico-Clasp series connector, 202396-1107 (http://www.molex.com/pdm_docs/sd/2023960207_sd.pdf), generated with kicad-footprint-generator +connector Molex Pico-Clasp top entry +0 +13 +12 +Connector_Molex +Molex_Pico-Clasp_202396-1207_1x12-1MP_P1.00mm_Horizontal +Molex Pico-Clasp series connector, 202396-1207 (http://www.molex.com/pdm_docs/sd/2023960207_sd.pdf), generated with kicad-footprint-generator +connector Molex Pico-Clasp top entry +0 +14 +13 +Connector_Molex +Molex_Pico-Clasp_202396-1307_1x13-1MP_P1.00mm_Horizontal +Molex Pico-Clasp series connector, 202396-1307 (http://www.molex.com/pdm_docs/sd/2023960207_sd.pdf), generated with kicad-footprint-generator +connector Molex Pico-Clasp top entry +0 +15 +14 +Connector_Molex +Molex_Pico-Clasp_202396-1407_1x14-1MP_P1.00mm_Horizontal +Molex Pico-Clasp series connector, 202396-1407 (http://www.molex.com/pdm_docs/sd/2023960207_sd.pdf), generated with kicad-footprint-generator +connector Molex Pico-Clasp top entry +0 +16 +15 +Connector_Molex +Molex_Pico-Clasp_202396-1507_1x15-1MP_P1.00mm_Horizontal +Molex Pico-Clasp series connector, 202396-1507 (http://www.molex.com/pdm_docs/sd/2023960207_sd.pdf), generated with kicad-footprint-generator +connector Molex Pico-Clasp top entry +0 +17 +16 +Connector_Molex +Molex_Pico-Clasp_501331-0207_1x02-1MP_P1.00mm_Vertical +Molex Pico-Clasp series connector, 501331-0207 (http://www.molex.com/pdm_docs/sd/5013310207_sd.pdf), generated with kicad-footprint-generator +connector Molex Pico-Clasp side entry +0 +4 +3 +Connector_Molex +Molex_Pico-Clasp_501331-0307_1x03-1MP_P1.00mm_Vertical +Molex Pico-Clasp series connector, 501331-0307 (http://www.molex.com/pdm_docs/sd/5013310207_sd.pdf), generated with kicad-footprint-generator +connector Molex Pico-Clasp side entry +0 +5 +4 +Connector_Molex +Molex_Pico-Clasp_501331-0407_1x04-1MP_P1.00mm_Vertical +Molex Pico-Clasp series connector, 501331-0407 (http://www.molex.com/pdm_docs/sd/5013310207_sd.pdf), generated with kicad-footprint-generator +connector Molex Pico-Clasp side entry +0 +6 +5 +Connector_Molex +Molex_Pico-Clasp_501331-0507_1x05-1MP_P1.00mm_Vertical +Molex Pico-Clasp series connector, 501331-0507 (http://www.molex.com/pdm_docs/sd/5013310207_sd.pdf), generated with kicad-footprint-generator +connector Molex Pico-Clasp side entry +0 +7 +6 +Connector_Molex +Molex_Pico-Clasp_501331-0607_1x06-1MP_P1.00mm_Vertical +Molex Pico-Clasp series connector, 501331-0607 (http://www.molex.com/pdm_docs/sd/5013310207_sd.pdf), generated with kicad-footprint-generator +connector Molex Pico-Clasp side entry +0 +8 +7 +Connector_Molex +Molex_Pico-Clasp_501331-0707_1x07-1MP_P1.00mm_Vertical +Molex Pico-Clasp series connector, 501331-0707 (http://www.molex.com/pdm_docs/sd/5013310207_sd.pdf), generated with kicad-footprint-generator +connector Molex Pico-Clasp side entry +0 +9 +8 +Connector_Molex +Molex_Pico-Clasp_501331-0807_1x08-1MP_P1.00mm_Vertical +Molex Pico-Clasp series connector, 501331-0807 (http://www.molex.com/pdm_docs/sd/5013310207_sd.pdf), generated with kicad-footprint-generator +connector Molex Pico-Clasp side entry +0 +10 +9 +Connector_Molex +Molex_Pico-Clasp_501331-0907_1x09-1MP_P1.00mm_Vertical +Molex Pico-Clasp series connector, 501331-0907 (http://www.molex.com/pdm_docs/sd/5013310207_sd.pdf), generated with kicad-footprint-generator +connector Molex Pico-Clasp side entry +0 +11 +10 +Connector_Molex +Molex_Pico-Clasp_501331-1007_1x10-1MP_P1.00mm_Vertical +Molex Pico-Clasp series connector, 501331-1007 (http://www.molex.com/pdm_docs/sd/5013310207_sd.pdf), generated with kicad-footprint-generator +connector Molex Pico-Clasp side entry +0 +12 +11 +Connector_Molex +Molex_Pico-Clasp_501331-1107_1x11-1MP_P1.00mm_Vertical +Molex Pico-Clasp series connector, 501331-1107 (http://www.molex.com/pdm_docs/sd/5013310207_sd.pdf), generated with kicad-footprint-generator +connector Molex Pico-Clasp side entry +0 +13 +12 +Connector_Molex +Molex_Pico-Clasp_501331-1207_1x12-1MP_P1.00mm_Vertical +Molex Pico-Clasp series connector, 501331-1207 (http://www.molex.com/pdm_docs/sd/5013310207_sd.pdf), generated with kicad-footprint-generator +connector Molex Pico-Clasp side entry +0 +14 +13 +Connector_Molex +Molex_Pico-Clasp_501331-1307_1x13-1MP_P1.00mm_Vertical +Molex Pico-Clasp series connector, 501331-1307 (http://www.molex.com/pdm_docs/sd/5013310207_sd.pdf), generated with kicad-footprint-generator +connector Molex Pico-Clasp side entry +0 +15 +14 +Connector_Molex +Molex_Pico-Clasp_501331-1407_1x14-1MP_P1.00mm_Vertical +Molex Pico-Clasp series connector, 501331-1407 (http://www.molex.com/pdm_docs/sd/5013310207_sd.pdf), generated with kicad-footprint-generator +connector Molex Pico-Clasp side entry +0 +16 +15 +Connector_Molex +Molex_Pico-Clasp_501331-1507_1x15-1MP_P1.00mm_Vertical +Molex Pico-Clasp series connector, 501331-1507 (http://www.molex.com/pdm_docs/sd/5013310207_sd.pdf), generated with kicad-footprint-generator +connector Molex Pico-Clasp side entry +0 +17 +16 +Connector_Molex +Molex_Pico-EZmate_78171-0002_1x02-1MP_P1.20mm_Vertical +Molex Pico-EZmate series connector, 78171-0002 (http://www.molex.com/pdm_docs/sd/781710002_sd.pdf), generated with kicad-footprint-generator +connector Molex Pico-EZmate side entry +0 +4 +3 +Connector_Molex +Molex_Pico-EZmate_78171-0003_1x03-1MP_P1.20mm_Vertical +Molex Pico-EZmate series connector, 78171-0003 (http://www.molex.com/pdm_docs/sd/781710002_sd.pdf), generated with kicad-footprint-generator +connector Molex Pico-EZmate side entry +0 +5 +4 +Connector_Molex +Molex_Pico-EZmate_78171-0004_1x04-1MP_P1.20mm_Vertical +Molex Pico-EZmate series connector, 78171-0004 (http://www.molex.com/pdm_docs/sd/781710002_sd.pdf), generated with kicad-footprint-generator +connector Molex Pico-EZmate side entry +0 +6 +5 +Connector_Molex +Molex_Pico-EZmate_78171-0005_1x05-1MP_P1.20mm_Vertical +Molex Pico-EZmate series connector, 78171-0005 (http://www.molex.com/pdm_docs/sd/781710002_sd.pdf), generated with kicad-footprint-generator +connector Molex Pico-EZmate side entry +0 +7 +6 +Connector_Molex +Molex_Pico-EZmate_Slim_202656-0021_1x02-1MP_P1.20mm_Vertical +Molex Pico-EZmate_Slim series connector, 202656-0021 (http://www.molex.com/pdm_docs/sd/2026560021_sd.pdf), generated with kicad-footprint-generator +connector Molex Pico-EZmate_Slim side entry +0 +4 +3 +Connector_Molex +Molex_Pico-Lock_504050-0491_1x04-1MP_P1.50mm_Horizontal +Molex Pico-Lock series connector, 504050-0491 (http://www.molex.com/pdm_docs/sd/5040500891_sd.pdf), generated with kicad-footprint-generator +connector Molex Pico-Lock horizontal +0 +6 +5 +Connector_Molex +Molex_Pico-Lock_504050-0591_1x05-1MP_P1.50mm_Horizontal +Molex Pico-Lock series connector, 504050-0591 (http://www.molex.com/pdm_docs/sd/5040500891_sd.pdf), generated with kicad-footprint-generator +connector Molex Pico-Lock horizontal +0 +7 +6 +Connector_Molex +Molex_Pico-Lock_504050-0691_1x06-1MP_P1.50mm_Horizontal +Molex Pico-Lock series connector, 504050-0691 (http://www.molex.com/pdm_docs/sd/5040500891_sd.pdf), generated with kicad-footprint-generator +connector Molex Pico-Lock horizontal +0 +8 +7 +Connector_Molex +Molex_Pico-Lock_504050-0791_1x07-1MP_P1.50mm_Horizontal +Molex Pico-Lock series connector, 504050-0791 (http://www.molex.com/pdm_docs/sd/5040500891_sd.pdf), generated with kicad-footprint-generator +connector Molex Pico-Lock horizontal +0 +9 +8 +Connector_Molex +Molex_Pico-Lock_504050-0891_1x08-1MP_P1.50mm_Horizontal +Molex Pico-Lock series connector, 504050-0891 (http://www.molex.com/pdm_docs/sd/5040500891_sd.pdf), generated with kicad-footprint-generator +connector Molex Pico-Lock horizontal +0 +10 +9 +Connector_Molex +Molex_Pico-Lock_504050-1091_1x10-1MP_P1.50mm_Horizontal +Molex Pico-Lock series connector, 504050-1091 (http://www.molex.com/pdm_docs/sd/5040500891_sd.pdf), generated with kicad-footprint-generator +connector Molex Pico-Lock horizontal +0 +12 +11 +Connector_Molex +Molex_Pico-Lock_504050-1291_1x12-1MP_P1.50mm_Horizontal +Molex Pico-Lock series connector, 504050-1291 (http://www.molex.com/pdm_docs/sd/5040500891_sd.pdf), generated with kicad-footprint-generator +connector Molex Pico-Lock horizontal +0 +14 +13 +Connector_Molex +Molex_Pico-SPOX_87437-1443_1x14-P1.5mm_Vertical +Molex Pico-SPOX Connector System, 87437-1443, 14 Pins per row (https://www.molex.com/pdm_docs/sd/874371443_sd.pdf#page=2) +molex pico spox 14 +0 +28 +14 +Connector_Molex +Molex_PicoBlade_53047-0210_1x02_P1.25mm_Vertical +Molex PicoBlade Connector System, 53047-0210, 2 Pins per row (http://www.molex.com/pdm_docs/sd/530470610_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade side entry +0 +2 +2 +Connector_Molex +Molex_PicoBlade_53047-0310_1x03_P1.25mm_Vertical +Molex PicoBlade Connector System, 53047-0310, 3 Pins per row (http://www.molex.com/pdm_docs/sd/530470610_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade side entry +0 +3 +3 +Connector_Molex +Molex_PicoBlade_53047-0410_1x04_P1.25mm_Vertical +Molex PicoBlade Connector System, 53047-0410, 4 Pins per row (http://www.molex.com/pdm_docs/sd/530470610_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade side entry +0 +4 +4 +Connector_Molex +Molex_PicoBlade_53047-0510_1x05_P1.25mm_Vertical +Molex PicoBlade Connector System, 53047-0510, 5 Pins per row (http://www.molex.com/pdm_docs/sd/530470610_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade side entry +0 +5 +5 +Connector_Molex +Molex_PicoBlade_53047-0610_1x06_P1.25mm_Vertical +Molex PicoBlade Connector System, 53047-0610, 6 Pins per row (http://www.molex.com/pdm_docs/sd/530470610_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade side entry +0 +6 +6 +Connector_Molex +Molex_PicoBlade_53047-0710_1x07_P1.25mm_Vertical +Molex PicoBlade Connector System, 53047-0710, 7 Pins per row (http://www.molex.com/pdm_docs/sd/530470610_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade side entry +0 +7 +7 +Connector_Molex +Molex_PicoBlade_53047-0810_1x08_P1.25mm_Vertical +Molex PicoBlade Connector System, 53047-0810, 8 Pins per row (http://www.molex.com/pdm_docs/sd/530470610_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade side entry +0 +8 +8 +Connector_Molex +Molex_PicoBlade_53047-0910_1x09_P1.25mm_Vertical +Molex PicoBlade Connector System, 53047-0910, 9 Pins per row (http://www.molex.com/pdm_docs/sd/530470610_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade side entry +0 +9 +9 +Connector_Molex +Molex_PicoBlade_53047-1010_1x10_P1.25mm_Vertical +Molex PicoBlade Connector System, 53047-1010, 10 Pins per row (http://www.molex.com/pdm_docs/sd/530470610_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade side entry +0 +10 +10 +Connector_Molex +Molex_PicoBlade_53047-1110_1x11_P1.25mm_Vertical +Molex PicoBlade Connector System, 53047-1110, 11 Pins per row (http://www.molex.com/pdm_docs/sd/530470610_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade side entry +0 +11 +11 +Connector_Molex +Molex_PicoBlade_53047-1210_1x12_P1.25mm_Vertical +Molex PicoBlade Connector System, 53047-1210, 12 Pins per row (http://www.molex.com/pdm_docs/sd/530470610_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade side entry +0 +12 +12 +Connector_Molex +Molex_PicoBlade_53047-1310_1x13_P1.25mm_Vertical +Molex PicoBlade Connector System, 53047-1310, 13 Pins per row (http://www.molex.com/pdm_docs/sd/530470610_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade side entry +0 +13 +13 +Connector_Molex +Molex_PicoBlade_53047-1410_1x14_P1.25mm_Vertical +Molex PicoBlade Connector System, 53047-1410, 14 Pins per row (http://www.molex.com/pdm_docs/sd/530470610_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade side entry +0 +14 +14 +Connector_Molex +Molex_PicoBlade_53047-1510_1x15_P1.25mm_Vertical +Molex PicoBlade Connector System, 53047-1510, 15 Pins per row (http://www.molex.com/pdm_docs/sd/530470610_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade side entry +0 +15 +15 +Connector_Molex +Molex_PicoBlade_53048-0210_1x02_P1.25mm_Horizontal +Molex PicoBlade Connector System, 53048-0210, 2 Pins per row (http://www.molex.com/pdm_docs/sd/530480210_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade top entry +0 +2 +2 +Connector_Molex +Molex_PicoBlade_53048-0310_1x03_P1.25mm_Horizontal +Molex PicoBlade Connector System, 53048-0310, 3 Pins per row (http://www.molex.com/pdm_docs/sd/530480210_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade top entry +0 +3 +3 +Connector_Molex +Molex_PicoBlade_53048-0410_1x04_P1.25mm_Horizontal +Molex PicoBlade Connector System, 53048-0410, 4 Pins per row (http://www.molex.com/pdm_docs/sd/530480210_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade top entry +0 +4 +4 +Connector_Molex +Molex_PicoBlade_53048-0510_1x05_P1.25mm_Horizontal +Molex PicoBlade Connector System, 53048-0510, 5 Pins per row (http://www.molex.com/pdm_docs/sd/530480210_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade top entry +0 +5 +5 +Connector_Molex +Molex_PicoBlade_53048-0610_1x06_P1.25mm_Horizontal +Molex PicoBlade Connector System, 53048-0610, 6 Pins per row (http://www.molex.com/pdm_docs/sd/530480210_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade top entry +0 +6 +6 +Connector_Molex +Molex_PicoBlade_53048-0710_1x07_P1.25mm_Horizontal +Molex PicoBlade Connector System, 53048-0710, 7 Pins per row (http://www.molex.com/pdm_docs/sd/530480210_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade top entry +0 +7 +7 +Connector_Molex +Molex_PicoBlade_53048-0810_1x08_P1.25mm_Horizontal +Molex PicoBlade Connector System, 53048-0810, 8 Pins per row (http://www.molex.com/pdm_docs/sd/530480210_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade top entry +0 +8 +8 +Connector_Molex +Molex_PicoBlade_53048-0910_1x09_P1.25mm_Horizontal +Molex PicoBlade Connector System, 53048-0910, 9 Pins per row (http://www.molex.com/pdm_docs/sd/530480210_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade top entry +0 +9 +9 +Connector_Molex +Molex_PicoBlade_53048-1010_1x10_P1.25mm_Horizontal +Molex PicoBlade Connector System, 53048-1010, 10 Pins per row (http://www.molex.com/pdm_docs/sd/530480210_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade top entry +0 +10 +10 +Connector_Molex +Molex_PicoBlade_53048-1110_1x11_P1.25mm_Horizontal +Molex PicoBlade Connector System, 53048-1110, 11 Pins per row (http://www.molex.com/pdm_docs/sd/530480210_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade top entry +0 +11 +11 +Connector_Molex +Molex_PicoBlade_53048-1210_1x12_P1.25mm_Horizontal +Molex PicoBlade Connector System, 53048-1210, 12 Pins per row (http://www.molex.com/pdm_docs/sd/530480210_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade top entry +0 +12 +12 +Connector_Molex +Molex_PicoBlade_53048-1310_1x13_P1.25mm_Horizontal +Molex PicoBlade Connector System, 53048-1310, 13 Pins per row (http://www.molex.com/pdm_docs/sd/530480210_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade top entry +0 +13 +13 +Connector_Molex +Molex_PicoBlade_53048-1410_1x14_P1.25mm_Horizontal +Molex PicoBlade Connector System, 53048-1410, 14 Pins per row (http://www.molex.com/pdm_docs/sd/530480210_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade top entry +0 +14 +14 +Connector_Molex +Molex_PicoBlade_53048-1510_1x15_P1.25mm_Horizontal +Molex PicoBlade Connector System, 53048-1510, 15 Pins per row (http://www.molex.com/pdm_docs/sd/530480210_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade top entry +0 +15 +15 +Connector_Molex +Molex_PicoBlade_53261-0271_1x02-1MP_P1.25mm_Horizontal +Molex PicoBlade series connector, 53261-0271 (http://www.molex.com/pdm_docs/sd/532610271_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade top entry +0 +4 +3 +Connector_Molex +Molex_PicoBlade_53261-0371_1x03-1MP_P1.25mm_Horizontal +Molex PicoBlade series connector, 53261-0371 (http://www.molex.com/pdm_docs/sd/532610271_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade top entry +0 +5 +4 +Connector_Molex +Molex_PicoBlade_53261-0471_1x04-1MP_P1.25mm_Horizontal +Molex PicoBlade series connector, 53261-0471 (http://www.molex.com/pdm_docs/sd/532610271_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade top entry +0 +6 +5 +Connector_Molex +Molex_PicoBlade_53261-0571_1x05-1MP_P1.25mm_Horizontal +Molex PicoBlade series connector, 53261-0571 (http://www.molex.com/pdm_docs/sd/532610271_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade top entry +0 +7 +6 +Connector_Molex +Molex_PicoBlade_53261-0671_1x06-1MP_P1.25mm_Horizontal +Molex PicoBlade series connector, 53261-0671 (http://www.molex.com/pdm_docs/sd/532610271_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade top entry +0 +8 +7 +Connector_Molex +Molex_PicoBlade_53261-0771_1x07-1MP_P1.25mm_Horizontal +Molex PicoBlade series connector, 53261-0771 (http://www.molex.com/pdm_docs/sd/532610271_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade top entry +0 +9 +8 +Connector_Molex +Molex_PicoBlade_53261-0871_1x08-1MP_P1.25mm_Horizontal +Molex PicoBlade series connector, 53261-0871 (http://www.molex.com/pdm_docs/sd/532610271_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade top entry +0 +10 +9 +Connector_Molex +Molex_PicoBlade_53261-0971_1x09-1MP_P1.25mm_Horizontal +Molex PicoBlade series connector, 53261-0971 (http://www.molex.com/pdm_docs/sd/532610271_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade top entry +0 +11 +10 +Connector_Molex +Molex_PicoBlade_53261-1071_1x10-1MP_P1.25mm_Horizontal +Molex PicoBlade series connector, 53261-1071 (http://www.molex.com/pdm_docs/sd/532610271_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade top entry +0 +12 +11 +Connector_Molex +Molex_PicoBlade_53261-1171_1x11-1MP_P1.25mm_Horizontal +Molex PicoBlade series connector, 53261-1171 (http://www.molex.com/pdm_docs/sd/532610271_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade top entry +0 +13 +12 +Connector_Molex +Molex_PicoBlade_53261-1271_1x12-1MP_P1.25mm_Horizontal +Molex PicoBlade series connector, 53261-1271 (http://www.molex.com/pdm_docs/sd/532610271_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade top entry +0 +14 +13 +Connector_Molex +Molex_PicoBlade_53261-1371_1x13-1MP_P1.25mm_Horizontal +Molex PicoBlade series connector, 53261-1371 (http://www.molex.com/pdm_docs/sd/532610271_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade top entry +0 +15 +14 +Connector_Molex +Molex_PicoBlade_53261-1471_1x14-1MP_P1.25mm_Horizontal +Molex PicoBlade series connector, 53261-1471 (http://www.molex.com/pdm_docs/sd/532610271_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade top entry +0 +16 +15 +Connector_Molex +Molex_PicoBlade_53261-1571_1x15-1MP_P1.25mm_Horizontal +Molex PicoBlade series connector, 53261-1571 (http://www.molex.com/pdm_docs/sd/532610271_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade top entry +0 +17 +16 +Connector_Molex +Molex_PicoBlade_53261-1771_1x17-1MP_P1.25mm_Horizontal +Molex PicoBlade series connector, 53261-1771 (http://www.molex.com/pdm_docs/sd/532610271_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade top entry +0 +19 +18 +Connector_Molex +Molex_PicoBlade_53398-0271_1x02-1MP_P1.25mm_Vertical +Molex PicoBlade series connector, 53398-0271 (http://www.molex.com/pdm_docs/sd/533980271_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade side entry +0 +4 +3 +Connector_Molex +Molex_PicoBlade_53398-0371_1x03-1MP_P1.25mm_Vertical +Molex PicoBlade series connector, 53398-0371 (http://www.molex.com/pdm_docs/sd/533980271_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade side entry +0 +5 +4 +Connector_Molex +Molex_PicoBlade_53398-0471_1x04-1MP_P1.25mm_Vertical +Molex PicoBlade series connector, 53398-0471 (http://www.molex.com/pdm_docs/sd/533980271_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade side entry +0 +6 +5 +Connector_Molex +Molex_PicoBlade_53398-0571_1x05-1MP_P1.25mm_Vertical +Molex PicoBlade series connector, 53398-0571 (http://www.molex.com/pdm_docs/sd/533980271_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade side entry +0 +7 +6 +Connector_Molex +Molex_PicoBlade_53398-0671_1x06-1MP_P1.25mm_Vertical +Molex PicoBlade series connector, 53398-0671 (http://www.molex.com/pdm_docs/sd/533980271_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade side entry +0 +8 +7 +Connector_Molex +Molex_PicoBlade_53398-0771_1x07-1MP_P1.25mm_Vertical +Molex PicoBlade series connector, 53398-0771 (http://www.molex.com/pdm_docs/sd/533980271_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade side entry +0 +9 +8 +Connector_Molex +Molex_PicoBlade_53398-0871_1x08-1MP_P1.25mm_Vertical +Molex PicoBlade series connector, 53398-0871 (http://www.molex.com/pdm_docs/sd/533980271_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade side entry +0 +10 +9 +Connector_Molex +Molex_PicoBlade_53398-0971_1x09-1MP_P1.25mm_Vertical +Molex PicoBlade series connector, 53398-0971 (http://www.molex.com/pdm_docs/sd/533980271_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade side entry +0 +11 +10 +Connector_Molex +Molex_PicoBlade_53398-1071_1x10-1MP_P1.25mm_Vertical +Molex PicoBlade series connector, 53398-1071 (http://www.molex.com/pdm_docs/sd/533980271_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade side entry +0 +12 +11 +Connector_Molex +Molex_PicoBlade_53398-1171_1x11-1MP_P1.25mm_Vertical +Molex PicoBlade series connector, 53398-1171 (http://www.molex.com/pdm_docs/sd/533980271_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade side entry +0 +13 +12 +Connector_Molex +Molex_PicoBlade_53398-1271_1x12-1MP_P1.25mm_Vertical +Molex PicoBlade series connector, 53398-1271 (http://www.molex.com/pdm_docs/sd/533980271_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade side entry +0 +14 +13 +Connector_Molex +Molex_PicoBlade_53398-1371_1x13-1MP_P1.25mm_Vertical +Molex PicoBlade series connector, 53398-1371 (http://www.molex.com/pdm_docs/sd/533980271_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade side entry +0 +15 +14 +Connector_Molex +Molex_PicoBlade_53398-1471_1x14-1MP_P1.25mm_Vertical +Molex PicoBlade series connector, 53398-1471 (http://www.molex.com/pdm_docs/sd/533980271_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade side entry +0 +16 +15 +Connector_Molex +Molex_PicoBlade_53398-1571_1x15-1MP_P1.25mm_Vertical +Molex PicoBlade series connector, 53398-1571 (http://www.molex.com/pdm_docs/sd/533980271_sd.pdf), generated with kicad-footprint-generator +connector Molex PicoBlade side entry +0 +17 +16 +Connector_Molex +Molex_Picoflex_90325-0004_2x02_P1.27mm_Vertical +Molex Picoflex Ribbon-Cable Connectors, 90325-0004, 4 Pins (http://www.molex.com/pdm_docs/sd/903250004_sd.pdf), generated with kicad-footprint-generator +connector Molex Picoflex side entry +0 +4 +4 +Connector_Molex +Molex_Picoflex_90325-0006_2x03_P1.27mm_Vertical +Molex Picoflex Ribbon-Cable Connectors, 90325-0006, 6 Pins (http://www.molex.com/pdm_docs/sd/903250004_sd.pdf), generated with kicad-footprint-generator +connector Molex Picoflex side entry +0 +6 +6 +Connector_Molex +Molex_Picoflex_90325-0008_2x04_P1.27mm_Vertical +Molex Picoflex Ribbon-Cable Connectors, 90325-0008, 8 Pins (http://www.molex.com/pdm_docs/sd/903250004_sd.pdf), generated with kicad-footprint-generator +connector Molex Picoflex side entry +0 +8 +8 +Connector_Molex +Molex_Picoflex_90325-0010_2x05_P1.27mm_Vertical +Molex Picoflex Ribbon-Cable Connectors, 90325-0010, 10 Pins (http://www.molex.com/pdm_docs/sd/903250004_sd.pdf), generated with kicad-footprint-generator +connector Molex Picoflex side entry +0 +10 +10 +Connector_Molex +Molex_Picoflex_90325-0012_2x06_P1.27mm_Vertical +Molex Picoflex Ribbon-Cable Connectors, 90325-0012, 12 Pins (http://www.molex.com/pdm_docs/sd/903250004_sd.pdf), generated with kicad-footprint-generator +connector Molex Picoflex side entry +0 +12 +12 +Connector_Molex +Molex_Picoflex_90325-0014_2x07_P1.27mm_Vertical +Molex Picoflex Ribbon-Cable Connectors, 90325-0014, 14 Pins (http://www.molex.com/pdm_docs/sd/903250004_sd.pdf), generated with kicad-footprint-generator +connector Molex Picoflex side entry +0 +14 +14 +Connector_Molex +Molex_Picoflex_90325-0016_2x08_P1.27mm_Vertical +Molex Picoflex Ribbon-Cable Connectors, 90325-0016, 16 Pins (http://www.molex.com/pdm_docs/sd/903250004_sd.pdf), generated with kicad-footprint-generator +connector Molex Picoflex side entry +0 +16 +16 +Connector_Molex +Molex_Picoflex_90325-0018_2x09_P1.27mm_Vertical +Molex Picoflex Ribbon-Cable Connectors, 90325-0018, 18 Pins (http://www.molex.com/pdm_docs/sd/903250004_sd.pdf), generated with kicad-footprint-generator +connector Molex Picoflex side entry +0 +18 +18 +Connector_Molex +Molex_Picoflex_90325-0020_2x10_P1.27mm_Vertical +Molex Picoflex Ribbon-Cable Connectors, 90325-0020, 20 Pins (http://www.molex.com/pdm_docs/sd/903250004_sd.pdf), generated with kicad-footprint-generator +connector Molex Picoflex side entry +0 +20 +20 +Connector_Molex +Molex_Picoflex_90325-0022_2x11_P1.27mm_Vertical +Molex Picoflex Ribbon-Cable Connectors, 90325-0022, 22 Pins (http://www.molex.com/pdm_docs/sd/903250004_sd.pdf), generated with kicad-footprint-generator +connector Molex Picoflex side entry +0 +22 +22 +Connector_Molex +Molex_Picoflex_90325-0024_2x12_P1.27mm_Vertical +Molex Picoflex Ribbon-Cable Connectors, 90325-0024, 24 Pins (http://www.molex.com/pdm_docs/sd/903250004_sd.pdf), generated with kicad-footprint-generator +connector Molex Picoflex side entry +0 +24 +24 +Connector_Molex +Molex_Picoflex_90325-0026_2x13_P1.27mm_Vertical +Molex Picoflex Ribbon-Cable Connectors, 90325-0026, 26 Pins (http://www.molex.com/pdm_docs/sd/903250004_sd.pdf), generated with kicad-footprint-generator +connector Molex Picoflex side entry +0 +26 +26 +Connector_Molex +Molex_Picoflex_90814-0004_2x02_P1.27mm_Vertical +Molex Picoflex Ribbon-Cable Connectors, 90814-0004, 4 Pins (http://www.molex.com/pdm_docs/sd/908140004_sd.pdf), generated with kicad-footprint-generator +connector Molex Picoflex side entry +0 +4 +4 +Connector_Molex +Molex_Picoflex_90814-0006_2x03_P1.27mm_Vertical +Molex Picoflex Ribbon-Cable Connectors, 90814-0006, 6 Pins (http://www.molex.com/pdm_docs/sd/908140004_sd.pdf), generated with kicad-footprint-generator +connector Molex Picoflex side entry +0 +6 +6 +Connector_Molex +Molex_Picoflex_90814-0008_2x04_P1.27mm_Vertical +Molex Picoflex Ribbon-Cable Connectors, 90814-0008, 8 Pins (http://www.molex.com/pdm_docs/sd/908140004_sd.pdf), generated with kicad-footprint-generator +connector Molex Picoflex side entry +0 +8 +8 +Connector_Molex +Molex_Picoflex_90814-0010_2x05_P1.27mm_Vertical +Molex Picoflex Ribbon-Cable Connectors, 90814-0010, 10 Pins (http://www.molex.com/pdm_docs/sd/908140004_sd.pdf), generated with kicad-footprint-generator +connector Molex Picoflex side entry +0 +10 +10 +Connector_Molex +Molex_Picoflex_90814-0012_2x06_P1.27mm_Vertical +Molex Picoflex Ribbon-Cable Connectors, 90814-0012, 12 Pins (http://www.molex.com/pdm_docs/sd/908140004_sd.pdf), generated with kicad-footprint-generator +connector Molex Picoflex side entry +0 +12 +12 +Connector_Molex +Molex_Picoflex_90814-0014_2x07_P1.27mm_Vertical +Molex Picoflex Ribbon-Cable Connectors, 90814-0014, 14 Pins (http://www.molex.com/pdm_docs/sd/908140004_sd.pdf), generated with kicad-footprint-generator +connector Molex Picoflex side entry +0 +14 +14 +Connector_Molex +Molex_Picoflex_90814-0016_2x08_P1.27mm_Vertical +Molex Picoflex Ribbon-Cable Connectors, 90814-0016, 16 Pins (http://www.molex.com/pdm_docs/sd/908140004_sd.pdf), generated with kicad-footprint-generator +connector Molex Picoflex side entry +0 +16 +16 +Connector_Molex +Molex_Picoflex_90814-0018_2x09_P1.27mm_Vertical +Molex Picoflex Ribbon-Cable Connectors, 90814-0018, 18 Pins (http://www.molex.com/pdm_docs/sd/908140004_sd.pdf), generated with kicad-footprint-generator +connector Molex Picoflex side entry +0 +18 +18 +Connector_Molex +Molex_Picoflex_90814-0020_2x10_P1.27mm_Vertical +Molex Picoflex Ribbon-Cable Connectors, 90814-0020, 20 Pins (http://www.molex.com/pdm_docs/sd/908140004_sd.pdf), generated with kicad-footprint-generator +connector Molex Picoflex side entry +0 +20 +20 +Connector_Molex +Molex_Picoflex_90814-0022_2x11_P1.27mm_Vertical +Molex Picoflex Ribbon-Cable Connectors, 90814-0022, 22 Pins (http://www.molex.com/pdm_docs/sd/908140004_sd.pdf), generated with kicad-footprint-generator +connector Molex Picoflex side entry +0 +22 +22 +Connector_Molex +Molex_Picoflex_90814-0024_2x12_P1.27mm_Vertical +Molex Picoflex Ribbon-Cable Connectors, 90814-0024, 24 Pins (http://www.molex.com/pdm_docs/sd/908140004_sd.pdf), generated with kicad-footprint-generator +connector Molex Picoflex side entry +0 +24 +24 +Connector_Molex +Molex_Picoflex_90814-0026_2x13_P1.27mm_Vertical +Molex Picoflex Ribbon-Cable Connectors, 90814-0026, 26 Pins (http://www.molex.com/pdm_docs/sd/908140004_sd.pdf), generated with kicad-footprint-generator +connector Molex Picoflex side entry +0 +26 +26 +Connector_Molex +Molex_SL_171971-0002_1x02_P2.54mm_Vertical +Molex Stackable Linear Connector, 171971-0002 (compatible alternatives: 171971-0102, 171971-0202), 2 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator +connector Molex SL vertical +0 +2 +2 +Connector_Molex +Molex_SL_171971-0003_1x03_P2.54mm_Vertical +Molex Stackable Linear Connector, 171971-0003 (compatible alternatives: 171971-0103, 171971-0203), 3 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator +connector Molex SL vertical +0 +3 +3 +Connector_Molex +Molex_SL_171971-0004_1x04_P2.54mm_Vertical +Molex Stackable Linear Connector, 171971-0004 (compatible alternatives: 171971-0104, 171971-0204), 4 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator +connector Molex SL vertical +0 +4 +4 +Connector_Molex +Molex_SL_171971-0005_1x05_P2.54mm_Vertical +Molex Stackable Linear Connector, 171971-0005 (compatible alternatives: 171971-0105, 171971-0205), 5 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator +connector Molex SL vertical +0 +5 +5 +Connector_Molex +Molex_SL_171971-0006_1x06_P2.54mm_Vertical +Molex Stackable Linear Connector, 171971-0006 (compatible alternatives: 171971-0106, 171971-0206), 6 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator +connector Molex SL vertical +0 +6 +6 +Connector_Molex +Molex_SL_171971-0007_1x07_P2.54mm_Vertical +Molex Stackable Linear Connector, 171971-0007 (compatible alternatives: 171971-0107, 171971-0207), 7 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator +connector Molex SL vertical +0 +7 +7 +Connector_Molex +Molex_SL_171971-0008_1x08_P2.54mm_Vertical +Molex Stackable Linear Connector, 171971-0008 (compatible alternatives: 171971-0108, 171971-0208), 8 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator +connector Molex SL vertical +0 +8 +8 +Connector_Molex +Molex_SL_171971-0009_1x09_P2.54mm_Vertical +Molex Stackable Linear Connector, 171971-0009 (compatible alternatives: 171971-0109, 171971-0209), 9 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator +connector Molex SL vertical +0 +9 +9 +Connector_Molex +Molex_SL_171971-0010_1x10_P2.54mm_Vertical +Molex Stackable Linear Connector, 171971-0010 (compatible alternatives: 171971-0110, 171971-0210), 10 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator +connector Molex SL vertical +0 +10 +10 +Connector_Molex +Molex_SL_171971-0011_1x11_P2.54mm_Vertical +Molex Stackable Linear Connector, 171971-0011 (compatible alternatives: 171971-0111, 171971-0211), 11 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator +connector Molex SL vertical +0 +11 +11 +Connector_Molex +Molex_SL_171971-0012_1x12_P2.54mm_Vertical +Molex Stackable Linear Connector, 171971-0012 (compatible alternatives: 171971-0112, 171971-0212), 12 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator +connector Molex SL vertical +0 +12 +12 +Connector_Molex +Molex_SL_171971-0013_1x13_P2.54mm_Vertical +Molex Stackable Linear Connector, 171971-0013 (compatible alternatives: 171971-0113, 171971-0213), 13 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator +connector Molex SL vertical +0 +13 +13 +Connector_Molex +Molex_SL_171971-0014_1x14_P2.54mm_Vertical +Molex Stackable Linear Connector, 171971-0014 (compatible alternatives: 171971-0114, 171971-0214), 14 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator +connector Molex SL vertical +0 +14 +14 +Connector_Molex +Molex_SL_171971-0015_1x15_P2.54mm_Vertical +Molex Stackable Linear Connector, 171971-0015 (compatible alternatives: 171971-0115, 171971-0215), 15 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator +connector Molex SL vertical +0 +15 +15 +Connector_Molex +Molex_SL_171971-0016_1x16_P2.54mm_Vertical +Molex Stackable Linear Connector, 171971-0016 (compatible alternatives: 171971-0116, 171971-0216), 16 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator +connector Molex SL vertical +0 +16 +16 +Connector_Molex +Molex_SL_171971-0017_1x17_P2.54mm_Vertical +Molex Stackable Linear Connector, 171971-0017 (compatible alternatives: 171971-0117, 171971-0217), 17 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator +connector Molex SL vertical +0 +17 +17 +Connector_Molex +Molex_SL_171971-0018_1x18_P2.54mm_Vertical +Molex Stackable Linear Connector, 171971-0018 (compatible alternatives: 171971-0118, 171971-0218), 18 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator +connector Molex SL vertical +0 +18 +18 +Connector_Molex +Molex_SL_171971-0019_1x19_P2.54mm_Vertical +Molex Stackable Linear Connector, 171971-0019 (compatible alternatives: 171971-0119, 171971-0219), 19 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator +connector Molex SL vertical +0 +19 +19 +Connector_Molex +Molex_SL_171971-0020_1x20_P2.54mm_Vertical +Molex Stackable Linear Connector, 171971-0020 (compatible alternatives: 171971-0120, 171971-0220), 20 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator +connector Molex SL vertical +0 +20 +20 +Connector_Molex +Molex_SL_171971-0021_1x21_P2.54mm_Vertical +Molex Stackable Linear Connector, 171971-0021 (compatible alternatives: 171971-0121, 171971-0221), 21 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator +connector Molex SL vertical +0 +21 +21 +Connector_Molex +Molex_SL_171971-0022_1x22_P2.54mm_Vertical +Molex Stackable Linear Connector, 171971-0022 (compatible alternatives: 171971-0122, 171971-0222), 22 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator +connector Molex SL vertical +0 +22 +22 +Connector_Molex +Molex_SL_171971-0023_1x23_P2.54mm_Vertical +Molex Stackable Linear Connector, 171971-0023 (compatible alternatives: 171971-0123, 171971-0223), 23 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator +connector Molex SL vertical +0 +23 +23 +Connector_Molex +Molex_SL_171971-0024_1x24_P2.54mm_Vertical +Molex Stackable Linear Connector, 171971-0024 (compatible alternatives: 171971-0124, 171971-0224), 24 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator +connector Molex SL vertical +0 +24 +24 +Connector_Molex +Molex_SL_171971-0025_1x25_P2.54mm_Vertical +Molex Stackable Linear Connector, 171971-0025 (compatible alternatives: 171971-0125, 171971-0225), 25 Pins per row (https://www.molex.com/pdm_docs/sd/1719710002_sd.pdf), generated with kicad-footprint-generator +connector Molex SL vertical +0 +25 +25 +Connector_Molex +Molex_SPOX_5267-02A_1x02_P2.50mm_Vertical +Molex SPOX Connector System, 5267-02A, 2 Pins per row (http://www.molex.com/pdm_docs/sd/022035035_sd.pdf), generated with kicad-footprint-generator +connector Molex SPOX side entry +0 +2 +2 +Connector_Molex +Molex_SPOX_5267-03A_1x03_P2.50mm_Vertical +Molex SPOX Connector System, 5267-03A, 3 Pins per row (http://www.molex.com/pdm_docs/sd/022035035_sd.pdf), generated with kicad-footprint-generator +connector Molex SPOX side entry +0 +3 +3 +Connector_Molex +Molex_SPOX_5267-04A_1x04_P2.50mm_Vertical +Molex SPOX Connector System, 5267-04A, 4 Pins per row (http://www.molex.com/pdm_docs/sd/022035035_sd.pdf), generated with kicad-footprint-generator +connector Molex SPOX side entry +0 +4 +4 +Connector_Molex +Molex_SPOX_5267-05A_1x05_P2.50mm_Vertical +Molex SPOX Connector System, 5267-05A, 5 Pins per row (http://www.molex.com/pdm_docs/sd/022035035_sd.pdf), generated with kicad-footprint-generator +connector Molex SPOX side entry +0 +5 +5 +Connector_Molex +Molex_SPOX_5267-06A_1x06_P2.50mm_Vertical +Molex SPOX Connector System, 5267-06A, 6 Pins per row (http://www.molex.com/pdm_docs/sd/022035035_sd.pdf), generated with kicad-footprint-generator +connector Molex SPOX side entry +0 +6 +6 +Connector_Molex +Molex_SPOX_5267-07A_1x07_P2.50mm_Vertical +Molex SPOX Connector System, 5267-07A, 7 Pins per row (http://www.molex.com/pdm_docs/sd/022035035_sd.pdf), generated with kicad-footprint-generator +connector Molex SPOX side entry +0 +7 +7 +Connector_Molex +Molex_SPOX_5267-08A_1x08_P2.50mm_Vertical +Molex SPOX Connector System, 5267-08A, 8 Pins per row (http://www.molex.com/pdm_docs/sd/022035035_sd.pdf), generated with kicad-footprint-generator +connector Molex SPOX side entry +0 +8 +8 +Connector_Molex +Molex_SPOX_5267-09A_1x09_P2.50mm_Vertical +Molex SPOX Connector System, 5267-09A, 9 Pins per row (http://www.molex.com/pdm_docs/sd/022035035_sd.pdf), generated with kicad-footprint-generator +connector Molex SPOX side entry +0 +9 +9 +Connector_Molex +Molex_SPOX_5267-10A_1x10_P2.50mm_Vertical +Molex SPOX Connector System, 5267-10A, 10 Pins per row (http://www.molex.com/pdm_docs/sd/022035035_sd.pdf), generated with kicad-footprint-generator +connector Molex SPOX side entry +0 +10 +10 +Connector_Molex +Molex_SPOX_5267-11A_1x11_P2.50mm_Vertical +Molex SPOX Connector System, 5267-11A, 11 Pins per row (http://www.molex.com/pdm_docs/sd/022035035_sd.pdf), generated with kicad-footprint-generator +connector Molex SPOX side entry +0 +11 +11 +Connector_Molex +Molex_SPOX_5267-12A_1x12_P2.50mm_Vertical +Molex SPOX Connector System, 5267-12A, 12 Pins per row (http://www.molex.com/pdm_docs/sd/022035035_sd.pdf), generated with kicad-footprint-generator +connector Molex SPOX side entry +0 +12 +12 +Connector_Molex +Molex_SPOX_5267-13A_1x13_P2.50mm_Vertical +Molex SPOX Connector System, 5267-13A, 13 Pins per row (http://www.molex.com/pdm_docs/sd/022035035_sd.pdf), generated with kicad-footprint-generator +connector Molex SPOX side entry +0 +13 +13 +Connector_Molex +Molex_SPOX_5267-14A_1x14_P2.50mm_Vertical +Molex SPOX Connector System, 5267-14A, 14 Pins per row (http://www.molex.com/pdm_docs/sd/022035035_sd.pdf), generated with kicad-footprint-generator +connector Molex SPOX side entry +0 +14 +14 +Connector_Molex +Molex_SPOX_5267-15A_1x15_P2.50mm_Vertical +Molex SPOX Connector System, 5267-15A, 15 Pins per row (http://www.molex.com/pdm_docs/sd/022035035_sd.pdf), generated with kicad-footprint-generator +connector Molex SPOX side entry +0 +15 +15 +Connector_Molex +Molex_SPOX_5268-02A_1x02_P2.50mm_Horizontal +Molex SPOX Connector System, 5268-02A, 2 Pins per row (https://www.molex.com/pdm_docs/sd/022057045_sd.pdf), generated with kicad-footprint-generator +connector Molex SPOX horizontal +0 +2 +2 +Connector_Molex +Molex_SPOX_5268-03A_1x03_P2.50mm_Horizontal +Molex SPOX Connector System, 5268-03A, 3 Pins per row (https://www.molex.com/pdm_docs/sd/022057045_sd.pdf), generated with kicad-footprint-generator +connector Molex SPOX horizontal +0 +3 +3 +Connector_Molex +Molex_SPOX_5268-04A_1x04_P2.50mm_Horizontal +Molex SPOX Connector System, 5268-04A, 4 Pins per row (https://www.molex.com/pdm_docs/sd/022057045_sd.pdf), generated with kicad-footprint-generator +connector Molex SPOX horizontal +0 +4 +4 +Connector_Molex +Molex_SPOX_5268-05A_1x05_P2.50mm_Horizontal +Molex SPOX Connector System, 5268-05A, 5 Pins per row (https://www.molex.com/pdm_docs/sd/022057045_sd.pdf), generated with kicad-footprint-generator +connector Molex SPOX horizontal +0 +5 +5 +Connector_Molex +Molex_SPOX_5268-06A_1x06_P2.50mm_Horizontal +Molex SPOX Connector System, 5268-06A, 6 Pins per row (https://www.molex.com/pdm_docs/sd/022057045_sd.pdf), generated with kicad-footprint-generator +connector Molex SPOX horizontal +0 +6 +6 +Connector_Molex +Molex_SPOX_5268-07A_1x07_P2.50mm_Horizontal +Molex SPOX Connector System, 5268-07A, 7 Pins per row (https://www.molex.com/pdm_docs/sd/022057045_sd.pdf), generated with kicad-footprint-generator +connector Molex SPOX horizontal +0 +7 +7 +Connector_Molex +Molex_SPOX_5268-08A_1x08_P2.50mm_Horizontal +Molex SPOX Connector System, 5268-08A, 8 Pins per row (https://www.molex.com/pdm_docs/sd/022057045_sd.pdf), generated with kicad-footprint-generator +connector Molex SPOX horizontal +0 +8 +8 +Connector_Molex +Molex_SPOX_5268-09A_1x09_P2.50mm_Horizontal +Molex SPOX Connector System, 5268-09A, 9 Pins per row (https://www.molex.com/pdm_docs/sd/022057045_sd.pdf), generated with kicad-footprint-generator +connector Molex SPOX horizontal +0 +9 +9 +Connector_Molex +Molex_SPOX_5268-10A_1x10_P2.50mm_Horizontal +Molex SPOX Connector System, 5268-10A, 10 Pins per row (https://www.molex.com/pdm_docs/sd/022057045_sd.pdf), generated with kicad-footprint-generator +connector Molex SPOX horizontal +0 +10 +10 +Connector_Molex +Molex_SPOX_5268-11A_1x11_P2.50mm_Horizontal +Molex SPOX Connector System, 5268-11A, 11 Pins per row (https://www.molex.com/pdm_docs/sd/022057045_sd.pdf), generated with kicad-footprint-generator +connector Molex SPOX horizontal +0 +11 +11 +Connector_Molex +Molex_SPOX_5268-12A_1x12_P2.50mm_Horizontal +Molex SPOX Connector System, 5268-12A, 12 Pins per row (https://www.molex.com/pdm_docs/sd/022057045_sd.pdf), generated with kicad-footprint-generator +connector Molex SPOX horizontal +0 +12 +12 +Connector_Molex +Molex_SPOX_5268-13A_1x13_P2.50mm_Horizontal +Molex SPOX Connector System, 5268-13A, 13 Pins per row (https://www.molex.com/pdm_docs/sd/022057045_sd.pdf), generated with kicad-footprint-generator +connector Molex SPOX horizontal +0 +13 +13 +Connector_Molex +Molex_SPOX_5268-14A_1x14_P2.50mm_Horizontal +Molex SPOX Connector System, 5268-14A, 14 Pins per row (https://www.molex.com/pdm_docs/sd/022057045_sd.pdf), generated with kicad-footprint-generator +connector Molex SPOX horizontal +0 +14 +14 +Connector_Molex +Molex_SPOX_5268-15A_1x15_P2.50mm_Horizontal +Molex SPOX Connector System, 5268-15A, 15 Pins per row (https://www.molex.com/pdm_docs/sd/022057045_sd.pdf), generated with kicad-footprint-generator +connector Molex SPOX horizontal +0 +15 +15 +Connector_Molex +Molex_Sabre_43160-0102_1x02_P7.49mm_Vertical +Molex Sabre Power Connector, 43160-0102, 2 Pins per row (http://www.molex.com/pdm_docs/sd/431600105_sd.pdf), generated with kicad-footprint-generator +connector Molex Sabre side entry +0 +4 +2 +Connector_Molex +Molex_Sabre_43160-0102_1x02_P7.49mm_Vertical_ThermalVias +Molex Sabre Power Connector, 43160-0102, With thermal vias in pads, 2 Pins per row (http://www.molex.com/pdm_docs/sd/431600105_sd.pdf), generated with kicad-footprint-generator +connector Molex Sabre side entry +0 +30 +2 +Connector_Molex +Molex_Sabre_43160-0103_1x03_P7.49mm_Vertical +Molex Sabre Power Connector, 43160-0103, 3 Pins per row (http://www.molex.com/pdm_docs/sd/431600105_sd.pdf), generated with kicad-footprint-generator +connector Molex Sabre side entry +0 +6 +3 +Connector_Molex +Molex_Sabre_43160-0103_1x03_P7.49mm_Vertical_ThermalVias +Molex Sabre Power Connector, 43160-0103, With thermal vias in pads, 3 Pins per row (http://www.molex.com/pdm_docs/sd/431600105_sd.pdf), generated with kicad-footprint-generator +connector Molex Sabre side entry +0 +45 +3 +Connector_Molex +Molex_Sabre_43160-0104_1x04_P7.49mm_Vertical +Molex Sabre Power Connector, 43160-0104, 4 Pins per row (http://www.molex.com/pdm_docs/sd/431600105_sd.pdf), generated with kicad-footprint-generator +connector Molex Sabre side entry +0 +8 +4 +Connector_Molex +Molex_Sabre_43160-0104_1x04_P7.49mm_Vertical_ThermalVias +Molex Sabre Power Connector, 43160-0104, With thermal vias in pads, 4 Pins per row (http://www.molex.com/pdm_docs/sd/431600105_sd.pdf), generated with kicad-footprint-generator +connector Molex Sabre side entry +0 +60 +4 +Connector_Molex +Molex_Sabre_43160-0105_1x05_P7.49mm_Vertical +Molex Sabre Power Connector, 43160-0105, 5 Pins per row (http://www.molex.com/pdm_docs/sd/431600105_sd.pdf), generated with kicad-footprint-generator +connector Molex Sabre side entry +0 +10 +5 +Connector_Molex +Molex_Sabre_43160-0105_1x05_P7.49mm_Vertical_ThermalVias +Molex Sabre Power Connector, 43160-0105, With thermal vias in pads, 5 Pins per row (http://www.molex.com/pdm_docs/sd/431600105_sd.pdf), generated with kicad-footprint-generator +connector Molex Sabre side entry +0 +75 +5 +Connector_Molex +Molex_Sabre_43160-0106_1x06_P7.49mm_Vertical +Molex Sabre Power Connector, 43160-0106, 6 Pins per row (http://www.molex.com/pdm_docs/sd/431600105_sd.pdf), generated with kicad-footprint-generator +connector Molex Sabre side entry +0 +12 +6 +Connector_Molex +Molex_Sabre_43160-0106_1x06_P7.49mm_Vertical_ThermalVias +Molex Sabre Power Connector, 43160-0106, With thermal vias in pads, 6 Pins per row (http://www.molex.com/pdm_docs/sd/431600105_sd.pdf), generated with kicad-footprint-generator +connector Molex Sabre side entry +0 +90 +6 +Connector_Molex +Molex_Sabre_43160-1102_1x02_P7.49mm_Horizontal +Molex Sabre Power Connector, 43160-1102, 2 Pins per row (http://www.molex.com/pdm_docs/sd/431605304_sd.pdf), generated with kicad-footprint-generator +connector Molex Sabre top entry +0 +6 +2 +Connector_Molex +Molex_Sabre_43160-1102_1x02_P7.49mm_Horizontal_ThermalVias +Molex Sabre Power Connector, 43160-1102, With thermal vias in pads, 2 Pins per row (http://www.molex.com/pdm_docs/sd/431605304_sd.pdf), generated with kicad-footprint-generator +connector Molex Sabre top entry +0 +32 +2 +Connector_Molex +Molex_Sabre_43160-1103_1x03_P7.49mm_Horizontal +Molex Sabre Power Connector, 43160-1103, 3 Pins per row (http://www.molex.com/pdm_docs/sd/431605304_sd.pdf), generated with kicad-footprint-generator +connector Molex Sabre top entry +0 +8 +3 +Connector_Molex +Molex_Sabre_43160-1103_1x03_P7.49mm_Horizontal_ThermalVias +Molex Sabre Power Connector, 43160-1103, With thermal vias in pads, 3 Pins per row (http://www.molex.com/pdm_docs/sd/431605304_sd.pdf), generated with kicad-footprint-generator +connector Molex Sabre top entry +0 +47 +3 +Connector_Molex +Molex_Sabre_43160-1104_1x04_P7.49mm_Horizontal +Molex Sabre Power Connector, 43160-1104, 4 Pins per row (http://www.molex.com/pdm_docs/sd/431605304_sd.pdf), generated with kicad-footprint-generator +connector Molex Sabre top entry +0 +10 +4 +Connector_Molex +Molex_Sabre_43160-1104_1x04_P7.49mm_Horizontal_ThermalVias +Molex Sabre Power Connector, 43160-1104, With thermal vias in pads, 4 Pins per row (http://www.molex.com/pdm_docs/sd/431605304_sd.pdf), generated with kicad-footprint-generator +connector Molex Sabre top entry +0 +62 +4 +Connector_Molex +Molex_Sabre_43160-1105_1x05_P7.49mm_Horizontal +Molex Sabre Power Connector, 43160-1105, 5 Pins per row (http://www.molex.com/pdm_docs/sd/431605304_sd.pdf), generated with kicad-footprint-generator +connector Molex Sabre top entry +0 +12 +5 +Connector_Molex +Molex_Sabre_43160-1105_1x05_P7.49mm_Horizontal_ThermalVias +Molex Sabre Power Connector, 43160-1105, With thermal vias in pads, 5 Pins per row (http://www.molex.com/pdm_docs/sd/431605304_sd.pdf), generated with kicad-footprint-generator +connector Molex Sabre top entry +0 +77 +5 +Connector_Molex +Molex_Sabre_43160-1106_1x06_P7.49mm_Horizontal +Molex Sabre Power Connector, 43160-1106, 6 Pins per row (http://www.molex.com/pdm_docs/sd/431605304_sd.pdf), generated with kicad-footprint-generator +connector Molex Sabre top entry +0 +14 +6 +Connector_Molex +Molex_Sabre_43160-1106_1x06_P7.49mm_Horizontal_ThermalVias +Molex Sabre Power Connector, 43160-1106, With thermal vias in pads, 6 Pins per row (http://www.molex.com/pdm_docs/sd/431605304_sd.pdf), generated with kicad-footprint-generator +connector Molex Sabre top entry +0 +92 +6 +Connector_Molex +Molex_Sabre_43160-2102_1x02_P7.49mm_Vertical +Molex Sabre Power Connector, 43160-2102, 2 Pins per row (http://www.molex.com/pdm_docs/sd/431602102_sd.pdf), generated with kicad-footprint-generator +connector Molex Sabre side entry +0 +6 +2 +Connector_Molex +Molex_Sabre_43160-2102_1x02_P7.49mm_Vertical_ThermalVias +Molex Sabre Power Connector, 43160-2102, With thermal vias in pads, 2 Pins per row (http://www.molex.com/pdm_docs/sd/431602102_sd.pdf), generated with kicad-footprint-generator +connector Molex Sabre side entry +0 +32 +2 +Connector_Molex +Molex_Sabre_43160-2103_1x03_P7.49mm_Vertical +Molex Sabre Power Connector, 43160-2103, 3 Pins per row (http://www.molex.com/pdm_docs/sd/431602102_sd.pdf), generated with kicad-footprint-generator +connector Molex Sabre side entry +0 +8 +3 +Connector_Molex +Molex_Sabre_43160-2103_1x03_P7.49mm_Vertical_ThermalVias +Molex Sabre Power Connector, 43160-2103, With thermal vias in pads, 3 Pins per row (http://www.molex.com/pdm_docs/sd/431602102_sd.pdf), generated with kicad-footprint-generator +connector Molex Sabre side entry +0 +47 +3 +Connector_Molex +Molex_Sabre_43160-2104_1x04_P7.49mm_Vertical +Molex Sabre Power Connector, 43160-2104, 4 Pins per row (http://www.molex.com/pdm_docs/sd/431602102_sd.pdf), generated with kicad-footprint-generator +connector Molex Sabre side entry +0 +10 +4 +Connector_Molex +Molex_Sabre_43160-2104_1x04_P7.49mm_Vertical_ThermalVias +Molex Sabre Power Connector, 43160-2104, With thermal vias in pads, 4 Pins per row (http://www.molex.com/pdm_docs/sd/431602102_sd.pdf), generated with kicad-footprint-generator +connector Molex Sabre side entry +0 +62 +4 +Connector_Molex +Molex_Sabre_43160-2105_1x05_P7.49mm_Vertical +Molex Sabre Power Connector, 43160-2105, 5 Pins per row (http://www.molex.com/pdm_docs/sd/431602102_sd.pdf), generated with kicad-footprint-generator +connector Molex Sabre side entry +0 +12 +5 +Connector_Molex +Molex_Sabre_43160-2105_1x05_P7.49mm_Vertical_ThermalVias +Molex Sabre Power Connector, 43160-2105, With thermal vias in pads, 5 Pins per row (http://www.molex.com/pdm_docs/sd/431602102_sd.pdf), generated with kicad-footprint-generator +connector Molex Sabre side entry +0 +77 +5 +Connector_Molex +Molex_Sabre_43160-2106_1x06_P7.49mm_Vertical +Molex Sabre Power Connector, 43160-2106, 6 Pins per row (http://www.molex.com/pdm_docs/sd/431602102_sd.pdf), generated with kicad-footprint-generator +connector Molex Sabre side entry +0 +14 +6 +Connector_Molex +Molex_Sabre_43160-2106_1x06_P7.49mm_Vertical_ThermalVias +Molex Sabre Power Connector, 43160-2106, With thermal vias in pads, 6 Pins per row (http://www.molex.com/pdm_docs/sd/431602102_sd.pdf), generated with kicad-footprint-generator +connector Molex Sabre side entry +0 +92 +6 +Connector_Molex +Molex_Sabre_46007-1102_1x02_P7.49mm_Horizontal +Molex Sabre Power Connector, 46007-1102, 2 Pins per row (http://www.molex.com/pdm_docs/sd/460071105_sd.pdf), generated with kicad-footprint-generator +connector Molex Sabre top entry +0 +4 +2 +Connector_Molex +Molex_Sabre_46007-1102_1x02_P7.49mm_Horizontal_ThermalVias +Molex Sabre Power Connector, 46007-1102, With thermal vias in pads, 2 Pins per row (http://www.molex.com/pdm_docs/sd/460071105_sd.pdf), generated with kicad-footprint-generator +connector Molex Sabre top entry +0 +30 +2 +Connector_Molex +Molex_Sabre_46007-1103_1x03_P7.49mm_Horizontal +Molex Sabre Power Connector, 46007-1103, 3 Pins per row (http://www.molex.com/pdm_docs/sd/460071105_sd.pdf), generated with kicad-footprint-generator +connector Molex Sabre top entry +0 +6 +3 +Connector_Molex +Molex_Sabre_46007-1103_1x03_P7.49mm_Horizontal_ThermalVias +Molex Sabre Power Connector, 46007-1103, With thermal vias in pads, 3 Pins per row (http://www.molex.com/pdm_docs/sd/460071105_sd.pdf), generated with kicad-footprint-generator +connector Molex Sabre top entry +0 +45 +3 +Connector_Molex +Molex_Sabre_46007-1104_1x04_P7.49mm_Horizontal +Molex Sabre Power Connector, 46007-1104, 4 Pins per row (http://www.molex.com/pdm_docs/sd/460071105_sd.pdf), generated with kicad-footprint-generator +connector Molex Sabre top entry +0 +8 +4 +Connector_Molex +Molex_Sabre_46007-1104_1x04_P7.49mm_Horizontal_ThermalVias +Molex Sabre Power Connector, 46007-1104, With thermal vias in pads, 4 Pins per row (http://www.molex.com/pdm_docs/sd/460071105_sd.pdf), generated with kicad-footprint-generator +connector Molex Sabre top entry +0 +60 +4 +Connector_Molex +Molex_Sabre_46007-1105_1x05_P7.49mm_Horizontal +Molex Sabre Power Connector, 46007-1105, 5 Pins per row (http://www.molex.com/pdm_docs/sd/460071105_sd.pdf), generated with kicad-footprint-generator +connector Molex Sabre top entry +0 +10 +5 +Connector_Molex +Molex_Sabre_46007-1105_1x05_P7.49mm_Horizontal_ThermalVias +Molex Sabre Power Connector, 46007-1105, With thermal vias in pads, 5 Pins per row (http://www.molex.com/pdm_docs/sd/460071105_sd.pdf), generated with kicad-footprint-generator +connector Molex Sabre top entry +0 +75 +5 +Connector_Molex +Molex_Sabre_46007-1106_1x06_P7.49mm_Horizontal +Molex Sabre Power Connector, 46007-1106, 6 Pins per row (http://www.molex.com/pdm_docs/sd/460071105_sd.pdf), generated with kicad-footprint-generator +connector Molex Sabre top entry +0 +12 +6 +Connector_Molex +Molex_Sabre_46007-1106_1x06_P7.49mm_Horizontal_ThermalVias +Molex Sabre Power Connector, 46007-1106, With thermal vias in pads, 6 Pins per row (http://www.molex.com/pdm_docs/sd/460071105_sd.pdf), generated with kicad-footprint-generator +connector Molex Sabre top entry +0 +90 +6 +Connector_Molex +Molex_SlimStack_52991-0208_2x10_P0.50mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 52991-0208, 20 Pins (http://www.molex.com/pdm_docs/sd/529910308_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack vertical +0 +20 +20 +Connector_Molex +Molex_SlimStack_52991-0308_2x15_P0.50mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 52991-0308, 30 Pins (http://www.molex.com/pdm_docs/sd/529910308_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack vertical +0 +30 +30 +Connector_Molex +Molex_SlimStack_52991-0408_2x20_P0.50mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 52991-0408, 40 Pins (http://www.molex.com/pdm_docs/sd/529910308_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack vertical +0 +40 +40 +Connector_Molex +Molex_SlimStack_52991-0508_2x25_P0.50mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 52991-0508, 50 Pins (http://www.molex.com/pdm_docs/sd/529910308_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack vertical +0 +50 +50 +Connector_Molex +Molex_SlimStack_52991-0608_2x30_P0.50mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 52991-0608, 60 Pins (http://www.molex.com/pdm_docs/sd/529910308_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack vertical +0 +60 +60 +Connector_Molex +Molex_SlimStack_52991-0708_2x35_P0.50mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 52991-0708, 70 Pins (http://www.molex.com/pdm_docs/sd/529910308_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack vertical +0 +70 +70 +Connector_Molex +Molex_SlimStack_52991-0808_2x40_P0.50mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 52991-0808, 80 Pins (http://www.molex.com/pdm_docs/sd/529910308_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack vertical +0 +80 +80 +Connector_Molex +Molex_SlimStack_53748-0208_2x10_P0.50mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 53748-0208, 20 Pins (https://www.molex.com/pdm_docs/sd/537480308_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack vertical +0 +20 +20 +Connector_Molex +Molex_SlimStack_53748-0308_2x15_P0.50mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 53748-0308, 30 Pins (https://www.molex.com/pdm_docs/sd/537480308_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack vertical +0 +30 +30 +Connector_Molex +Molex_SlimStack_53748-0408_2x20_P0.50mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 53748-0408, 40 Pins (https://www.molex.com/pdm_docs/sd/537480308_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack vertical +0 +40 +40 +Connector_Molex +Molex_SlimStack_53748-0608_2x30_P0.50mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 53748-0608, 60 Pins (https://www.molex.com/pdm_docs/sd/537480308_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack vertical +0 +60 +60 +Connector_Molex +Molex_SlimStack_53748-0708_2x35_P0.50mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 53748-0708, 70 Pins (https://www.molex.com/pdm_docs/sd/537480308_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack vertical +0 +70 +70 +Connector_Molex +Molex_SlimStack_53748-0808_2x40_P0.50mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 53748-0808, 80 Pins (https://www.molex.com/pdm_docs/sd/537480308_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack vertical +0 +80 +80 +Connector_Molex +Molex_SlimStack_54722-0164_2x08_P0.50mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 54722-0164, 16 Pins (http://www.molex.com/pdm_docs/sd/547220804_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +16 +16 +Connector_Molex +Molex_SlimStack_54722-0204_2x10_P0.50mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 54722-0204, 20 Pins (http://www.molex.com/pdm_docs/sd/547220804_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +20 +20 +Connector_Molex +Molex_SlimStack_54722-0224_2x11_P0.50mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 54722-0224, 22 Pins (http://www.molex.com/pdm_docs/sd/547220804_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +22 +22 +Connector_Molex +Molex_SlimStack_54722-0244_2x12_P0.50mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 54722-0244, 24 Pins (http://www.molex.com/pdm_docs/sd/547220804_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +24 +24 +Connector_Molex +Molex_SlimStack_54722-0304_2x15_P0.50mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 54722-0304, 30 Pins (http://www.molex.com/pdm_docs/sd/547220804_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +30 +30 +Connector_Molex +Molex_SlimStack_54722-0344_2x17_P0.50mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 54722-0344, 34 Pins (http://www.molex.com/pdm_docs/sd/547220804_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +34 +34 +Connector_Molex +Molex_SlimStack_54722-0404_2x20_P0.50mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 54722-0404, 40 Pins (http://www.molex.com/pdm_docs/sd/547220804_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +40 +40 +Connector_Molex +Molex_SlimStack_54722-0504_2x25_P0.50mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 54722-0504, 50 Pins (http://www.molex.com/pdm_docs/sd/547220804_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +50 +50 +Connector_Molex +Molex_SlimStack_54722-0604_2x30_P0.50mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 54722-0604, 60 Pins (http://www.molex.com/pdm_docs/sd/547220804_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +60 +60 +Connector_Molex +Molex_SlimStack_54722-0804_2x40_P0.50mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 54722-0804, 80 Pins (http://www.molex.com/pdm_docs/sd/547220804_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +80 +80 +Connector_Molex +Molex_SlimStack_55560-0161_2x08_P0.50mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 55560-0161, 16 Pins (http://www.molex.com/pdm_docs/sd/555600207_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +16 +16 +Connector_Molex +Molex_SlimStack_55560-0201_2x10_P0.50mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 55560-0201, 20 Pins (http://www.molex.com/pdm_docs/sd/555600207_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +20 +20 +Connector_Molex +Molex_SlimStack_55560-0221_2x11_P0.50mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 55560-0221, 22 Pins (http://www.molex.com/pdm_docs/sd/555600207_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +22 +22 +Connector_Molex +Molex_SlimStack_55560-0241_2x12_P0.50mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 55560-0241, 24 Pins (http://www.molex.com/pdm_docs/sd/555600207_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +24 +24 +Connector_Molex +Molex_SlimStack_55560-0301_2x15_P0.50mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 55560-0301, 30 Pins (http://www.molex.com/pdm_docs/sd/555600207_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +30 +30 +Connector_Molex +Molex_SlimStack_55560-0341_2x17_P0.50mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 55560-0341, 34 Pins (http://www.molex.com/pdm_docs/sd/555600207_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +34 +34 +Connector_Molex +Molex_SlimStack_55560-0401_2x20_P0.50mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 55560-0401, 40 Pins (http://www.molex.com/pdm_docs/sd/555600207_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +40 +40 +Connector_Molex +Molex_SlimStack_55560-0501_2x25_P0.50mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 55560-0501, 50 Pins (http://www.molex.com/pdm_docs/sd/555600207_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +50 +50 +Connector_Molex +Molex_SlimStack_55560-0601_2x30_P0.50mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 55560-0601, 60 Pins (http://www.molex.com/pdm_docs/sd/555600207_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +60 +60 +Connector_Molex +Molex_SlimStack_55560-0801_2x40_P0.50mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 55560-0801, 80 Pins (http://www.molex.com/pdm_docs/sd/555600207_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +80 +80 +Connector_Molex +Molex_SlimStack_501920-3001_2x15_P0.50mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 501920-3001, 30 Pins (http://www.molex.com/pdm_docs/sd/5019204001_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +30 +30 +Connector_Molex +Molex_SlimStack_501920-4001_2x20_P0.50mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 501920-4001, 40 Pins (http://www.molex.com/pdm_docs/sd/5019204001_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +40 +40 +Connector_Molex +Molex_SlimStack_501920-5001_2x25_P0.50mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 501920-5001, 50 Pins (http://www.molex.com/pdm_docs/sd/5019204001_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +50 +50 +Connector_Molex +Molex_SlimStack_502426-0810_2x04_P0.40mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502426-0810, 8 Pins (http://www.molex.com/pdm_docs/sd/5024260810_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +8 +8 +Connector_Molex +Molex_SlimStack_502426-1410_2x07_P0.40mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502426-1410, 14 Pins (http://www.molex.com/pdm_docs/sd/5024260810_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +14 +14 +Connector_Molex +Molex_SlimStack_502426-2010_2x10_P0.40mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502426-2010, 20 Pins (http://www.molex.com/pdm_docs/sd/5024260810_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +20 +20 +Connector_Molex +Molex_SlimStack_502426-2210_2x11_P0.40mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502426-2210, 22 Pins (http://www.molex.com/pdm_docs/sd/5024260810_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +22 +22 +Connector_Molex +Molex_SlimStack_502426-2410_2x12_P0.40mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502426-2410, 24 Pins (http://www.molex.com/pdm_docs/sd/5024260810_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +24 +24 +Connector_Molex +Molex_SlimStack_502426-2610_2x13_P0.40mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502426-2610, 26 Pins (http://www.molex.com/pdm_docs/sd/5024260810_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +26 +26 +Connector_Molex +Molex_SlimStack_502426-3010_2x15_P0.40mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502426-3010, 30 Pins (http://www.molex.com/pdm_docs/sd/5024260810_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +30 +30 +Connector_Molex +Molex_SlimStack_502426-3210_2x16_P0.40mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502426-3210, 32 Pins (http://www.molex.com/pdm_docs/sd/5024260810_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +32 +32 +Connector_Molex +Molex_SlimStack_502426-3410_2x17_P0.40mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502426-3410, 34 Pins (http://www.molex.com/pdm_docs/sd/5024260810_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +34 +34 +Connector_Molex +Molex_SlimStack_502426-4010_2x20_P0.40mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502426-4010, 40 Pins (http://www.molex.com/pdm_docs/sd/5024260810_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +40 +40 +Connector_Molex +Molex_SlimStack_502426-4410_2x22_P0.40mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502426-4410, 44 Pins (http://www.molex.com/pdm_docs/sd/5024260810_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +44 +44 +Connector_Molex +Molex_SlimStack_502426-5010_2x25_P0.40mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502426-5010, 50 Pins (http://www.molex.com/pdm_docs/sd/5024260810_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +50 +50 +Connector_Molex +Molex_SlimStack_502426-6010_2x30_P0.40mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502426-6010, 60 Pins (http://www.molex.com/pdm_docs/sd/5024260810_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +60 +60 +Connector_Molex +Molex_SlimStack_502426-6410_2x32_P0.40mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502426-6410, 64 Pins (http://www.molex.com/pdm_docs/sd/5024260810_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +64 +64 +Connector_Molex +Molex_SlimStack_502426-8010_2x40_P0.40mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502426-8010, 80 Pins (http://www.molex.com/pdm_docs/sd/5024260810_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +80 +80 +Connector_Molex +Molex_SlimStack_502430-0820_2x04_P0.40mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502430-0820, 8 Pins (http://www.molex.com/pdm_docs/sd/5024300820_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +8 +8 +Connector_Molex +Molex_SlimStack_502430-1410_2x07_P0.40mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502430-1410, 14 Pins (http://www.molex.com/pdm_docs/sd/5024301410_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +14 +14 +Connector_Molex +Molex_SlimStack_502430-2010_2x10_P0.40mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502430-2010, 20 Pins (http://www.molex.com/pdm_docs/sd/5024301410_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +20 +20 +Connector_Molex +Molex_SlimStack_502430-2210_2x11_P0.40mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502430-2210, 22 Pins (http://www.molex.com/pdm_docs/sd/5024301410_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +22 +22 +Connector_Molex +Molex_SlimStack_502430-2410_2x12_P0.40mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502430-2410, 24 Pins (http://www.molex.com/pdm_docs/sd/5024301410_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +24 +24 +Connector_Molex +Molex_SlimStack_502430-2610_2x13_P0.40mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502430-2610, 26 Pins (http://www.molex.com/pdm_docs/sd/5024301410_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +26 +26 +Connector_Molex +Molex_SlimStack_502430-3010_2x15_P0.40mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502430-3010, 30 Pins (http://www.molex.com/pdm_docs/sd/5024301410_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +30 +30 +Connector_Molex +Molex_SlimStack_502430-3210_2x16_P0.40mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502430-3210, 32 Pins (http://www.molex.com/pdm_docs/sd/5024301410_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +32 +32 +Connector_Molex +Molex_SlimStack_502430-3410_2x17_P0.40mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502430-3410, 34 Pins (http://www.molex.com/pdm_docs/sd/5024301410_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +34 +34 +Connector_Molex +Molex_SlimStack_502430-4010_2x20_P0.40mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502430-4010, 40 Pins (http://www.molex.com/pdm_docs/sd/5024301410_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +40 +40 +Connector_Molex +Molex_SlimStack_502430-4410_2x22_P0.40mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502430-4410, 44 Pins (http://www.molex.com/pdm_docs/sd/5024301410_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +44 +44 +Connector_Molex +Molex_SlimStack_502430-5010_2x25_P0.40mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502430-5010, 50 Pins (http://www.molex.com/pdm_docs/sd/5024301410_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +50 +50 +Connector_Molex +Molex_SlimStack_502430-6010_2x30_P0.40mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502430-6010, 60 Pins (http://www.molex.com/pdm_docs/sd/5024301410_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +60 +60 +Connector_Molex +Molex_SlimStack_502430-6410_2x32_P0.40mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502430-6410, 64 Pins (http://www.molex.com/pdm_docs/sd/5024301410_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +64 +64 +Connector_Molex +Molex_SlimStack_502430-8010_2x40_P0.40mm_Vertical +Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 502430-8010, 80 Pins (http://www.molex.com/pdm_docs/sd/5024301410_sd.pdf), generated with kicad-footprint-generator +connector Molex SlimStack side entry +0 +80 +80 +Connector_PCBEdge +4UCON_10156_2x40_P1.27mm_Socket_Horizontal +4UCON 10156 Card edge socket with 80 contacts (40 each side), through-hole, http://www.4uconnector.com/online/object/4udrawing/10156.pdf +4UCON 10156 Card edge socket with 80 contacts +0 +80 +80 +Connector_PCBEdge +BUS_AT +AT ISA 16 bits Bus Edge Connector +BUS ISA AT Edge connector +0 +98 +98 +Connector_PCBEdge +BUS_PCI +PCI bus Edge Connector +PCI bus Edge Connector +0 +240 +120 +Connector_PCBEdge +BUS_PCI_Express_Mini +Mini-PCI Express bus connector (https://s3.amazonaws.com/fit-iot/download/facet-cards/documents/PCI_Express_miniCard_Electromechanical_specs_rev1.2.pdf#page=11) +mini pcie +0 +54 +53 +Connector_PCBEdge +BUS_PCI_Express_Mini_Dual +Mini-PCI Express bus connector full size with dual clips (https://s3.amazonaws.com/fit-iot/download/facet-cards/documents/PCI_Express_miniCard_Electromechanical_specs_rev1.2.pdf#page=28) +mini pcie +0 +54 +53 +Connector_PCBEdge +BUS_PCI_Express_Mini_Full +Mini-PCI Express bus connector full size with clips (https://s3.amazonaws.com/fit-iot/download/facet-cards/documents/PCI_Express_miniCard_Electromechanical_specs_rev1.2.pdf#page=24) +mini pcie +0 +54 +53 +Connector_PCBEdge +BUS_PCI_Express_Mini_Half +Mini-PCI Express bus connector half size with clips (https://s3.amazonaws.com/fit-iot/download/facet-cards/documents/PCI_Express_miniCard_Electromechanical_specs_rev1.2.pdf#page=25) +mini pcie +0 +54 +53 +Connector_PCBEdge +BUS_PCIexpress_x1 +PCIexpress Bus Edge Connector x1 http://www.ritrontek.com/uploadfile/2016/1026/20161026105231124.pdf#page=70 +PCIe +0 +36 +36 +Connector_PCBEdge +BUS_PCIexpress_x4 +PCIexpress Bus Edge Connector x1 http://www.ritrontek.com/uploadfile/2016/1026/20161026105231124.pdf#page=70 +PCIe +0 +64 +64 +Connector_PCBEdge +BUS_PCIexpress_x8 +PCIexpress Bus Edge Connector x1 http://www.ritrontek.com/uploadfile/2016/1026/20161026105231124.pdf#page=70 +PCIe +0 +98 +98 +Connector_PCBEdge +BUS_PCIexpress_x16 +PCIexpress Bus Edge Connector x1 http://www.ritrontek.com/uploadfile/2016/1026/20161026105231124.pdf#page=70 +PCIe +0 +164 +164 +Connector_PCBEdge +JAE_MM60-EZH039-Bx_BUS_PCI_Express_Holder +PCI Express mini card latch for 3.9mm connector height, https://www.jae.com/direct/topics/topics_file_download/?topics_id=68909&ext_no=06&index=0&_lang=en&v=2022071912512930114109 +MiniPCI +0 +6 +1 +Connector_PCBEdge +JAE_MM60-EZH059-Bx_BUS_PCI_Express_Holder +PCI Express mini card latch for 5.9mm connector height, https://www.jae.com/direct/topics/topics_file_download/topics_id=68910&ext_no=06&index=0&_lang=en&v= +MiniPCI +0 +6 +1 +Connector_PCBEdge +SODIMM-200_1.8V_Card_edge +SODIMM 200-pins edge connector, Jedec MO-224 Variation AB compliant (1.8V DDR2 SDRAM), 0.6mm pitch, https://www.jst-mfg.com/product/pdf/eng/eDM-200P.pdf +sodimm +0 +200 +200 +Connector_PCBEdge +SODIMM-200_2.5V_Card_edge +SODIMM 200-pins edge connector, Jedec MO-224 Variation AA compliant (2.5V DDR SDRAM), 0.6mm pitch, https://www.jst-mfg.com/product/pdf/eng/eDM-200P.pdf +sodimm +0 +200 +200 +Connector_PCBEdge +Samtec_MECF-05-0_-L-DV_2x05_P1.27mm_Polarized_Edge +Highspeed card edge connector for PCB's with 05 contacts (polarized) +conn samtec card-edge high-speed +0 +8 +8 +Connector_PCBEdge +Samtec_MECF-05-0_-NP-L-DV_2x05_P1.27mm_Edge +Highspeed card edge connector for PCB's with 05 contacts (not polarized) +conn samtec card-edge high-speed +0 +10 +10 +Connector_PCBEdge +Samtec_MECF-05-01-L-DV-WT_2x05_P1.27mm_Polarized_Socket_Horizontal +Highspeed card edge connector for 1.6mm PCB's with 05 contacts (polarized) +conn samtec card-edge high-speed +0 +10 +8 +Connector_PCBEdge +Samtec_MECF-05-01-L-DV_2x05_P1.27mm_Polarized_Socket_Horizontal +Highspeed card edge connector for 1.6mm PCB's with 05 contacts (polarized) +conn samtec card-edge high-speed +0 +8 +8 +Connector_PCBEdge +Samtec_MECF-05-01-NP-L-DV-WT_2x05_P1.27mm_Socket_Horizontal +Highspeed card edge connector for 1.6mm PCB's with 05 contacts (not polarized) +conn samtec card-edge high-speed +0 +12 +10 +Connector_PCBEdge +Samtec_MECF-05-01-NP-L-DV_2x05_P1.27mm_Socket_Horizontal +Highspeed card edge connector for 1.6mm PCB's with 05 contacts (not polarized) +conn samtec card-edge high-speed +0 +10 +10 +Connector_PCBEdge +Samtec_MECF-05-02-L-DV-WT_2x05_P1.27mm_Polarized_Socket_Horizontal +Highspeed card edge connector for 2.4mm PCB's with 05 contacts (polarized) +conn samtec card-edge high-speed +0 +10 +8 +Connector_PCBEdge +Samtec_MECF-05-02-L-DV_2x05_P1.27mm_Polarized_Socket_Horizontal +Highspeed card edge connector for 2.4mm PCB's with 05 contacts (polarized) +conn samtec card-edge high-speed +0 +8 +8 +Connector_PCBEdge +Samtec_MECF-05-02-NP-L-DV-WT_2x05_P1.27mm_Socket_Horizontal +Highspeed card edge connector for 2.4mm PCB's with 05 contacts (not polarized) +conn samtec card-edge high-speed +0 +12 +10 +Connector_PCBEdge +Samtec_MECF-05-02-NP-L-DV_2x05_P1.27mm_Socket_Horizontal +Highspeed card edge connector for 2.4mm PCB's with 05 contacts (not polarized) +conn samtec card-edge high-speed +0 +10 +10 +Connector_PCBEdge +Samtec_MECF-08-0_-L-DV_2x08_P1.27mm_Polarized_Edge +Highspeed card edge connector for PCB's with 08 contacts (polarized) +conn samtec card-edge high-speed +0 +14 +14 +Connector_PCBEdge +Samtec_MECF-08-0_-NP-L-DV_2x08_P1.27mm_Edge +Highspeed card edge connector for PCB's with 08 contacts (not polarized) +conn samtec card-edge high-speed +0 +16 +16 +Connector_PCBEdge +Samtec_MECF-08-01-L-DV-WT_2x08_P1.27mm_Polarized_Socket_Horizontal +Highspeed card edge connector for 1.6mm PCB's with 08 contacts (polarized) +conn samtec card-edge high-speed +0 +16 +14 +Connector_PCBEdge +Samtec_MECF-08-01-L-DV_2x08_P1.27mm_Polarized_Socket_Horizontal +Highspeed card edge connector for 1.6mm PCB's with 08 contacts (polarized) +conn samtec card-edge high-speed +0 +14 +14 +Connector_PCBEdge +Samtec_MECF-08-01-NP-L-DV-WT_2x08_P1.27mm_Socket_Horizontal +Highspeed card edge connector for 1.6mm PCB's with 08 contacts (not polarized) +conn samtec card-edge high-speed +0 +18 +16 +Connector_PCBEdge +Samtec_MECF-08-01-NP-L-DV_2x08_P1.27mm_Socket_Horizontal +Highspeed card edge connector for 1.6mm PCB's with 08 contacts (not polarized) +conn samtec card-edge high-speed +0 +16 +16 +Connector_PCBEdge +Samtec_MECF-08-02-L-DV-WT_2x08_P1.27mm_Polarized_Socket_Horizontal +Highspeed card edge connector for 2.4mm PCB's with 08 contacts (polarized) +conn samtec card-edge high-speed +0 +16 +14 +Connector_PCBEdge +Samtec_MECF-08-02-L-DV_2x08_P1.27mm_Polarized_Socket_Horizontal +Highspeed card edge connector for 2.4mm PCB's with 08 contacts (polarized) +conn samtec card-edge high-speed +0 +14 +14 +Connector_PCBEdge +Samtec_MECF-08-02-NP-L-DV-WT_2x08_P1.27mm_Socket_Horizontal +Highspeed card edge connector for 2.4mm PCB's with 08 contacts (not polarized) +conn samtec card-edge high-speed +0 +18 +16 +Connector_PCBEdge +Samtec_MECF-08-02-NP-L-DV_2x08_P1.27mm_Socket_Horizontal +Highspeed card edge connector for 2.4mm PCB's with 08 contacts (not polarized) +conn samtec card-edge high-speed +0 +16 +16 +Connector_PCBEdge +Samtec_MECF-20-0_-L-DV_2x20_P1.27mm_Polarized_Edge +Highspeed card edge connector for PCB's with 20 contacts (polarized) +conn samtec card-edge high-speed +0 +38 +38 +Connector_PCBEdge +Samtec_MECF-20-0_-NP-L-DV_2x20_P1.27mm_Edge +Highspeed card edge connector for PCB's with 20 contacts (not polarized) +conn samtec card-edge high-speed +0 +40 +40 +Connector_PCBEdge +Samtec_MECF-20-01-L-DV-WT_2x20_P1.27mm_Polarized_Socket_Horizontal +Highspeed card edge connector for 1.6mm PCB's with 20 contacts (polarized) +conn samtec card-edge high-speed +0 +40 +38 +Connector_PCBEdge +Samtec_MECF-20-01-L-DV_2x20_P1.27mm_Polarized_Socket_Horizontal +Highspeed card edge connector for 1.6mm PCB's with 20 contacts (polarized) +conn samtec card-edge high-speed +0 +38 +38 +Connector_PCBEdge +Samtec_MECF-20-01-NP-L-DV-WT_2x20_P1.27mm_Socket_Horizontal +Highspeed card edge connector for 1.6mm PCB's with 20 contacts (not polarized) +conn samtec card-edge high-speed +0 +42 +40 +Connector_PCBEdge +Samtec_MECF-20-01-NP-L-DV_2x20_P1.27mm_Socket_Horizontal +Highspeed card edge connector for 1.6mm PCB's with 20 contacts (not polarized) +conn samtec card-edge high-speed +0 +40 +40 +Connector_PCBEdge +Samtec_MECF-20-02-L-DV-WT_2x20_P1.27mm_Polarized_Socket_Horizontal +Highspeed card edge connector for 2.4mm PCB's with 20 contacts (polarized) +conn samtec card-edge high-speed +0 +40 +38 +Connector_PCBEdge +Samtec_MECF-20-02-L-DV_2x20_P1.27mm_Polarized_Socket_Horizontal +Highspeed card edge connector for 2.4mm PCB's with 20 contacts (polarized) +conn samtec card-edge high-speed +0 +38 +38 +Connector_PCBEdge +Samtec_MECF-20-02-NP-L-DV-WT_2x20_P1.27mm_Socket_Horizontal +Highspeed card edge connector for 2.4mm PCB's with 20 contacts (not polarized) +conn samtec card-edge high-speed +0 +42 +40 +Connector_PCBEdge +Samtec_MECF-20-02-NP-L-DV_2x20_P1.27mm_Socket_Horizontal +Highspeed card edge connector for 2.4mm PCB's with 20 contacts (not polarized) +conn samtec card-edge high-speed +0 +40 +40 +Connector_PCBEdge +Samtec_MECF-30-0_-L-DV_2x30_P1.27mm_Polarized_Edge +Highspeed card edge connector for PCB's with 30 contacts (polarized) +conn samtec card-edge high-speed +0 +58 +58 +Connector_PCBEdge +Samtec_MECF-30-0_-NP-L-DV_2x30_P1.27mm_Edge +Highspeed card edge connector for PCB's with 30 contacts (not polarized) +conn samtec card-edge high-speed +0 +60 +60 +Connector_PCBEdge +Samtec_MECF-30-01-L-DV-WT_2x30_P1.27mm_Polarized_Socket_Horizontal +Highspeed card edge connector for 1.6mm PCB's with 30 contacts (polarized) +conn samtec card-edge high-speed +0 +60 +58 +Connector_PCBEdge +Samtec_MECF-30-01-L-DV_2x30_P1.27mm_Polarized_Socket_Horizontal +Highspeed card edge connector for 1.6mm PCB's with 30 contacts (polarized) +conn samtec card-edge high-speed +0 +58 +58 +Connector_PCBEdge +Samtec_MECF-30-01-NP-L-DV-WT_2x30_P1.27mm_Socket_Horizontal +Highspeed card edge connector for 1.6mm PCB's with 30 contacts (not polarized) +conn samtec card-edge high-speed +0 +62 +60 +Connector_PCBEdge +Samtec_MECF-30-01-NP-L-DV_2x30_P1.27mm_Socket_Horizontal +Highspeed card edge connector for 1.6mm PCB's with 30 contacts (not polarized) +conn samtec card-edge high-speed +0 +60 +60 +Connector_PCBEdge +Samtec_MECF-30-02-L-DV-WT_2x30_P1.27mm_Polarized_Socket_Horizontal +Highspeed card edge connector for 2.4mm PCB's with 30 contacts (polarized) +conn samtec card-edge high-speed +0 +60 +58 +Connector_PCBEdge +Samtec_MECF-30-02-L-DV_2x30_P1.27mm_Polarized_Socket_Horizontal +Highspeed card edge connector for 2.4mm PCB's with 30 contacts (polarized) +conn samtec card-edge high-speed +0 +58 +58 +Connector_PCBEdge +Samtec_MECF-30-02-NP-L-DV-WT_2x30_P1.27mm_Socket_Horizontal +Highspeed card edge connector for 2.4mm PCB's with 30 contacts (not polarized) +conn samtec card-edge high-speed +0 +62 +60 +Connector_PCBEdge +Samtec_MECF-30-02-NP-L-DV_2x30_P1.27mm_Socket_Horizontal +Highspeed card edge connector for 2.4mm PCB's with 30 contacts (not polarized) +conn samtec card-edge high-speed +0 +60 +60 +Connector_PCBEdge +Samtec_MECF-40-0_-L-DV_2x40_P1.27mm_Polarized_Edge +Highspeed card edge connector for PCB's with 40 contacts (polarized) +conn samtec card-edge high-speed +0 +78 +78 +Connector_PCBEdge +Samtec_MECF-40-0_-NP-L-DV_2x40_P1.27mm_Edge +Highspeed card edge connector for PCB's with 40 contacts (not polarized) +conn samtec card-edge high-speed +0 +80 +80 +Connector_PCBEdge +Samtec_MECF-40-01-L-DV-WT_2x40_P1.27mm_Polarized_Socket_Horizontal +Highspeed card edge connector for 1.6mm PCB's with 40 contacts (polarized) +conn samtec card-edge high-speed +0 +80 +78 +Connector_PCBEdge +Samtec_MECF-40-01-L-DV_2x40_P1.27mm_Polarized_Socket_Horizontal +Highspeed card edge connector for 1.6mm PCB's with 40 contacts (polarized) +conn samtec card-edge high-speed +0 +78 +78 +Connector_PCBEdge +Samtec_MECF-40-01-NP-L-DV-WT_2x40_P1.27mm_Socket_Horizontal +Highspeed card edge connector for 1.6mm PCB's with 40 contacts (not polarized) +conn samtec card-edge high-speed +0 +82 +80 +Connector_PCBEdge +Samtec_MECF-40-01-NP-L-DV_2x40_P1.27mm_Socket_Horizontal +Highspeed card edge connector for 1.6mm PCB's with 40 contacts (not polarized) +conn samtec card-edge high-speed +0 +80 +80 +Connector_PCBEdge +Samtec_MECF-40-02-L-DV-WT_2x40_P1.27mm_Polarized_Socket_Horizontal +Highspeed card edge connector for 2.4mm PCB's with 40 contacts (polarized) +conn samtec card-edge high-speed +0 +80 +78 +Connector_PCBEdge +Samtec_MECF-40-02-L-DV_2x40_P1.27mm_Polarized_Socket_Horizontal +Highspeed card edge connector for 2.4mm PCB's with 40 contacts (polarized) +conn samtec card-edge high-speed +0 +78 +78 +Connector_PCBEdge +Samtec_MECF-40-02-NP-L-DV-WT_2x40_P1.27mm_Socket_Horizontal +Highspeed card edge connector for 2.4mm PCB's with 40 contacts (not polarized) +conn samtec card-edge high-speed +0 +82 +80 +Connector_PCBEdge +Samtec_MECF-40-02-NP-L-DV_2x40_P1.27mm_Socket_Horizontal +Highspeed card edge connector for 2.4mm PCB's with 40 contacts (not polarized) +conn samtec card-edge high-speed +0 +80 +80 +Connector_PCBEdge +Samtec_MECF-50-0_-L-DV_2x50_P1.27mm_Polarized_Edge +Highspeed card edge connector for PCB's with 50 contacts (polarized) +conn samtec card-edge high-speed +0 +98 +98 +Connector_PCBEdge +Samtec_MECF-50-0_-NP-L-DV_2x50_P1.27mm_Edge +Highspeed card edge connector for PCB's with 50 contacts (not polarized) +conn samtec card-edge high-speed +0 +100 +100 +Connector_PCBEdge +Samtec_MECF-50-01-L-DV-WT_2x50_P1.27mm_Polarized_Socket_Horizontal +Highspeed card edge connector for 1.6mm PCB's with 50 contacts (polarized) +conn samtec card-edge high-speed +0 +100 +98 +Connector_PCBEdge +Samtec_MECF-50-01-L-DV_2x50_P1.27mm_Polarized_Socket_Horizontal +Highspeed card edge connector for 1.6mm PCB's with 50 contacts (polarized) +conn samtec card-edge high-speed +0 +98 +98 +Connector_PCBEdge +Samtec_MECF-50-01-NP-L-DV-WT_2x50_P1.27mm_Socket_Horizontal +Highspeed card edge connector for 1.6mm PCB's with 50 contacts (not polarized) +conn samtec card-edge high-speed +0 +102 +100 +Connector_PCBEdge +Samtec_MECF-50-01-NP-L-DV_2x50_P1.27mm_Socket_Horizontal +Highspeed card edge connector for 1.6mm PCB's with 50 contacts (not polarized) +conn samtec card-edge high-speed +0 +100 +100 +Connector_PCBEdge +Samtec_MECF-50-02-L-DV-WT_2x50_P1.27mm_Polarized_Socket_Horizontal +Highspeed card edge connector for 2.4mm PCB's with 50 contacts (polarized) +conn samtec card-edge high-speed +0 +100 +98 +Connector_PCBEdge +Samtec_MECF-50-02-L-DV_2x50_P1.27mm_Polarized_Socket_Horizontal +Highspeed card edge connector for 2.4mm PCB's with 50 contacts (polarized) +conn samtec card-edge high-speed +0 +98 +98 +Connector_PCBEdge +Samtec_MECF-50-02-NP-L-DV-WT_2x50_P1.27mm_Socket_Horizontal +Highspeed card edge connector for 2.4mm PCB's with 50 contacts (not polarized) +conn samtec card-edge high-speed +0 +102 +100 +Connector_PCBEdge +Samtec_MECF-50-02-NP-L-DV_2x50_P1.27mm_Socket_Horizontal +Highspeed card edge connector for 2.4mm PCB's with 50 contacts (not polarized) +conn samtec card-edge high-speed +0 +100 +100 +Connector_PCBEdge +Samtec_MECF-60-0_-L-DV_2x60_P1.27mm_Polarized_Edge +Highspeed card edge connector for PCB's with 60 contacts (polarized) +conn samtec card-edge high-speed +0 +116 +116 +Connector_PCBEdge +Samtec_MECF-60-0_-NP-L-DV_2x60_P1.27mm_Edge +Highspeed card edge connector for PCB's with 60 contacts (not polarized) +conn samtec card-edge high-speed +0 +120 +120 +Connector_PCBEdge +Samtec_MECF-60-01-L-DV-WT_2x60_P1.27mm_Polarized_Socket_Horizontal +Highspeed card edge connector for 1.6mm PCB's with 60 contacts (polarized) +conn samtec card-edge high-speed +0 +118 +116 +Connector_PCBEdge +Samtec_MECF-60-01-L-DV_2x60_P1.27mm_Polarized_Socket_Horizontal +Highspeed card edge connector for 1.6mm PCB's with 60 contacts (polarized) +conn samtec card-edge high-speed +0 +116 +116 +Connector_PCBEdge +Samtec_MECF-60-01-NP-L-DV-WT_2x60_P1.27mm_Socket_Horizontal +Highspeed card edge connector for 1.6mm PCB's with 60 contacts (not polarized) +conn samtec card-edge high-speed +0 +122 +120 +Connector_PCBEdge +Samtec_MECF-60-01-NP-L-DV_2x60_P1.27mm_Socket_Horizontal +Highspeed card edge connector for 1.6mm PCB's with 60 contacts (not polarized) +conn samtec card-edge high-speed +0 +120 +120 +Connector_PCBEdge +Samtec_MECF-60-02-L-DV-WT_2x60_P1.27mm_Polarized_Socket_Horizontal +Highspeed card edge connector for 2.4mm PCB's with 60 contacts (polarized) +conn samtec card-edge high-speed +0 +118 +116 +Connector_PCBEdge +Samtec_MECF-60-02-L-DV_2x60_P1.27mm_Polarized_Socket_Horizontal +Highspeed card edge connector for 2.4mm PCB's with 60 contacts (polarized) +conn samtec card-edge high-speed +0 +116 +116 +Connector_PCBEdge +Samtec_MECF-60-02-NP-L-DV-WT_2x60_P1.27mm_Socket_Horizontal +Highspeed card edge connector for 2.4mm PCB's with 60 contacts (not polarized) +conn samtec card-edge high-speed +0 +122 +120 +Connector_PCBEdge +Samtec_MECF-60-02-NP-L-DV_2x60_P1.27mm_Socket_Horizontal +Highspeed card edge connector for 2.4mm PCB's with 60 contacts (not polarized) +conn samtec card-edge high-speed +0 +120 +120 +Connector_PCBEdge +Samtec_MECF-70-0_-L-DV_2x70_P1.27mm_Polarized_Edge +Highspeed card edge connector for PCB's with 70 contacts (polarized) +conn samtec card-edge high-speed +0 +136 +136 +Connector_PCBEdge +Samtec_MECF-70-0_-NP-L-DV_2x70_P1.27mm_Edge +Highspeed card edge connector for PCB's with 70 contacts (not polarized) +conn samtec card-edge high-speed +0 +140 +140 +Connector_PCBEdge +Samtec_MECF-70-01-L-DV-WT_2x70_P1.27mm_Polarized_Socket_Horizontal +Highspeed card edge connector for 1.6mm PCB's with 70 contacts (polarized) +conn samtec card-edge high-speed +0 +138 +136 +Connector_PCBEdge +Samtec_MECF-70-01-L-DV_2x70_P1.27mm_Polarized_Socket_Horizontal +Highspeed card edge connector for 1.6mm PCB's with 70 contacts (polarized) +conn samtec card-edge high-speed +0 +136 +136 +Connector_PCBEdge +Samtec_MECF-70-01-NP-L-DV-WT_2x70_P1.27mm_Socket_Horizontal +Highspeed card edge connector for 1.6mm PCB's with 70 contacts (not polarized) +conn samtec card-edge high-speed +0 +142 +140 +Connector_PCBEdge +Samtec_MECF-70-01-NP-L-DV_2x70_P1.27mm_Socket_Horizontal +Highspeed card edge connector for 1.6mm PCB's with 70 contacts (not polarized) +conn samtec card-edge high-speed +0 +140 +140 +Connector_PCBEdge +Samtec_MECF-70-02-L-DV-WT_2x70_P1.27mm_Polarized_Socket_Horizontal +Highspeed card edge connector for 2.4mm PCB's with 70 contacts (polarized) +conn samtec card-edge high-speed +0 +138 +136 +Connector_PCBEdge +Samtec_MECF-70-02-L-DV_2x70_P1.27mm_Polarized_Socket_Horizontal +Highspeed card edge connector for 2.4mm PCB's with 70 contacts (polarized) +conn samtec card-edge high-speed +0 +136 +136 +Connector_PCBEdge +Samtec_MECF-70-02-NP-L-DV-WT_2x70_P1.27mm_Socket_Horizontal +Highspeed card edge connector for 2.4mm PCB's with 70 contacts (not polarized) +conn samtec card-edge high-speed +0 +142 +140 +Connector_PCBEdge +Samtec_MECF-70-02-NP-L-DV_2x70_P1.27mm_Socket_Horizontal +Highspeed card edge connector for 2.4mm PCB's with 70 contacts (not polarized) +conn samtec card-edge high-speed +0 +140 +140 +Connector_PCBEdge +molex_EDGELOCK_2-CKT +https://www.molex.com/pdm_docs/sd/2008900106_sd.pdf +Connector PCBEdge molex EDGELOCK +0 +2 +2 +Connector_PCBEdge +molex_EDGELOCK_4-CKT +https://www.molex.com/pdm_docs/sd/2008900106_sd.pdf +Connector PCBEdge molex EDGELOCK +0 +4 +4 +Connector_PCBEdge +molex_EDGELOCK_6-CKT +https://www.molex.com/pdm_docs/sd/2008900106_sd.pdf +Connector PCBEdge molex EDGELOCK +0 +6 +6 +Connector_PCBEdge +molex_EDGELOCK_8-CKT +https://www.molex.com/pdm_docs/sd/2008900106_sd.pdf +Connector PCBEdge molex EDGELOCK +0 +8 +8 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBA_2,5_2-G-7,62_1x02_P7.62mm_Horizontal +Generic Phoenix Contact connector footprint for: GMSTBA_2,5/2-G-7,62; number of pins: 02; pin pitch: 7.62mm; Angled || order number: 1766233 12A 630V +phoenix_contact connector GMSTBA_01x02_G_7.62mm +0 +2 +2 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBA_2,5_2-G_1x02_P7.50mm_Horizontal +Generic Phoenix Contact connector footprint for: GMSTBA_2,5/2-G; number of pins: 02; pin pitch: 7.50mm; Angled || order number: 1766343 12A 630V +phoenix_contact connector GMSTBA_01x02_G_7.50mm +0 +2 +2 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBA_2,5_3-G-7,62_1x03_P7.62mm_Horizontal +Generic Phoenix Contact connector footprint for: GMSTBA_2,5/3-G-7,62; number of pins: 03; pin pitch: 7.62mm; Angled || order number: 1766246 12A 630V +phoenix_contact connector GMSTBA_01x03_G_7.62mm +0 +3 +3 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBA_2,5_3-G_1x03_P7.50mm_Horizontal +Generic Phoenix Contact connector footprint for: GMSTBA_2,5/3-G; number of pins: 03; pin pitch: 7.50mm; Angled || order number: 1766356 12A 630V +phoenix_contact connector GMSTBA_01x03_G_7.50mm +0 +3 +3 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBA_2,5_4-G-7,62_1x04_P7.62mm_Horizontal +Generic Phoenix Contact connector footprint for: GMSTBA_2,5/4-G-7,62; number of pins: 04; pin pitch: 7.62mm; Angled || order number: 1766259 12A 630V +phoenix_contact connector GMSTBA_01x04_G_7.62mm +0 +4 +4 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBA_2,5_4-G_1x04_P7.50mm_Horizontal +Generic Phoenix Contact connector footprint for: GMSTBA_2,5/4-G; number of pins: 04; pin pitch: 7.50mm; Angled || order number: 1766369 12A 630V +phoenix_contact connector GMSTBA_01x04_G_7.50mm +0 +4 +4 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBA_2,5_5-G-7,62_1x05_P7.62mm_Horizontal +Generic Phoenix Contact connector footprint for: GMSTBA_2,5/5-G-7,62; number of pins: 05; pin pitch: 7.62mm; Angled || order number: 1766262 12A 630V +phoenix_contact connector GMSTBA_01x05_G_7.62mm +0 +5 +5 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBA_2,5_5-G_1x05_P7.50mm_Horizontal +Generic Phoenix Contact connector footprint for: GMSTBA_2,5/5-G; number of pins: 05; pin pitch: 7.50mm; Angled || order number: 1766372 12A 630V +phoenix_contact connector GMSTBA_01x05_G_7.50mm +0 +5 +5 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBA_2,5_6-G-7,62_1x06_P7.62mm_Horizontal +Generic Phoenix Contact connector footprint for: GMSTBA_2,5/6-G-7,62; number of pins: 06; pin pitch: 7.62mm; Angled || order number: 1766275 12A 630V +phoenix_contact connector GMSTBA_01x06_G_7.62mm +0 +6 +6 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBA_2,5_6-G_1x06_P7.50mm_Horizontal +Generic Phoenix Contact connector footprint for: GMSTBA_2,5/6-G; number of pins: 06; pin pitch: 7.50mm; Angled || order number: 1766385 12A 630V +phoenix_contact connector GMSTBA_01x06_G_7.50mm +0 +6 +6 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBA_2,5_7-G-7,62_1x07_P7.62mm_Horizontal +Generic Phoenix Contact connector footprint for: GMSTBA_2,5/7-G-7,62; number of pins: 07; pin pitch: 7.62mm; Angled || order number: 1766288 12A 630V +phoenix_contact connector GMSTBA_01x07_G_7.62mm +0 +7 +7 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBA_2,5_7-G_1x07_P7.50mm_Horizontal +Generic Phoenix Contact connector footprint for: GMSTBA_2,5/7-G; number of pins: 07; pin pitch: 7.50mm; Angled || order number: 1766398 12A 630V +phoenix_contact connector GMSTBA_01x07_G_7.50mm +0 +7 +7 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBA_2,5_8-G-7,62_1x08_P7.62mm_Horizontal +Generic Phoenix Contact connector footprint for: GMSTBA_2,5/8-G-7,62; number of pins: 08; pin pitch: 7.62mm; Angled || order number: 1766291 12A 630V +phoenix_contact connector GMSTBA_01x08_G_7.62mm +0 +8 +8 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBA_2,5_8-G_1x08_P7.50mm_Horizontal +Generic Phoenix Contact connector footprint for: GMSTBA_2,5/8-G; number of pins: 08; pin pitch: 7.50mm; Angled || order number: 1766408 12A 630V +phoenix_contact connector GMSTBA_01x08_G_7.50mm +0 +8 +8 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBA_2,5_9-G-7,62_1x09_P7.62mm_Horizontal +Generic Phoenix Contact connector footprint for: GMSTBA_2,5/9-G-7,62; number of pins: 09; pin pitch: 7.62mm; Angled || order number: 1766301 12A 630V +phoenix_contact connector GMSTBA_01x09_G_7.62mm +0 +9 +9 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBA_2,5_9-G_1x09_P7.50mm_Horizontal +Generic Phoenix Contact connector footprint for: GMSTBA_2,5/9-G; number of pins: 09; pin pitch: 7.50mm; Angled || order number: 1766411 12A 630V +phoenix_contact connector GMSTBA_01x09_G_7.50mm +0 +9 +9 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBA_2,5_10-G-7,62_1x10_P7.62mm_Horizontal +Generic Phoenix Contact connector footprint for: GMSTBA_2,5/10-G-7,62; number of pins: 10; pin pitch: 7.62mm; Angled || order number: 1766314 12A 630V +phoenix_contact connector GMSTBA_01x10_G_7.62mm +0 +10 +10 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBA_2,5_10-G_1x10_P7.50mm_Horizontal +Generic Phoenix Contact connector footprint for: GMSTBA_2,5/10-G; number of pins: 10; pin pitch: 7.50mm; Angled || order number: 1766424 12A 630V +phoenix_contact connector GMSTBA_01x10_G_7.50mm +0 +10 +10 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBA_2,5_11-G-7,62_1x11_P7.62mm_Horizontal +Generic Phoenix Contact connector footprint for: GMSTBA_2,5/11-G-7,62; number of pins: 11; pin pitch: 7.62mm; Angled || order number: 1766327 12A 630V +phoenix_contact connector GMSTBA_01x11_G_7.62mm +0 +11 +11 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBA_2,5_11-G_1x11_P7.50mm_Horizontal +Generic Phoenix Contact connector footprint for: GMSTBA_2,5/11-G; number of pins: 11; pin pitch: 7.50mm; Angled || order number: 1766437 12A 630V +phoenix_contact connector GMSTBA_01x11_G_7.50mm +0 +11 +11 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBA_2,5_12-G-7,62_1x12_P7.62mm_Horizontal +Generic Phoenix Contact connector footprint for: GMSTBA_2,5/12-G-7,62; number of pins: 12; pin pitch: 7.62mm; Angled || order number: 1766330 12A 630V +phoenix_contact connector GMSTBA_01x12_G_7.62mm +0 +12 +12 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBA_2,5_12-G_1x12_P7.50mm_Horizontal +Generic Phoenix Contact connector footprint for: GMSTBA_2,5/12-G; number of pins: 12; pin pitch: 7.50mm; Angled || order number: 1766440 12A 630V +phoenix_contact connector GMSTBA_01x12_G_7.50mm +0 +12 +12 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBVA_2,5_2-G-7,62_1x02_P7.62mm_Vertical +Generic Phoenix Contact connector footprint for: GMSTBVA_2,5/2-G-7,62; number of pins: 02; pin pitch: 7.62mm; Vertical || order number: 1766770 12A 630V +phoenix_contact connector GMSTBVA_01x02_G_7.62mm +0 +2 +2 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBVA_2,5_2-G_1x02_P7.50mm_Vertical +Generic Phoenix Contact connector footprint for: GMSTBVA_2,5/2-G; number of pins: 02; pin pitch: 7.50mm; Vertical || order number: 1766660 12A 630V +phoenix_contact connector GMSTBVA_01x02_G_7.50mm +0 +2 +2 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBVA_2,5_3-G-7,62_1x03_P7.62mm_Vertical +Generic Phoenix Contact connector footprint for: GMSTBVA_2,5/3-G-7,62; number of pins: 03; pin pitch: 7.62mm; Vertical || order number: 1766783 12A 630V +phoenix_contact connector GMSTBVA_01x03_G_7.62mm +0 +3 +3 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBVA_2,5_3-G_1x03_P7.50mm_Vertical +Generic Phoenix Contact connector footprint for: GMSTBVA_2,5/3-G; number of pins: 03; pin pitch: 7.50mm; Vertical || order number: 1766673 12A 630V +phoenix_contact connector GMSTBVA_01x03_G_7.50mm +0 +3 +3 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBVA_2,5_4-G-7,62_1x04_P7.62mm_Vertical +Generic Phoenix Contact connector footprint for: GMSTBVA_2,5/4-G-7,62; number of pins: 04; pin pitch: 7.62mm; Vertical || order number: 1766796 12A 630V +phoenix_contact connector GMSTBVA_01x04_G_7.62mm +0 +4 +4 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBVA_2,5_4-G_1x04_P7.50mm_Vertical +Generic Phoenix Contact connector footprint for: GMSTBVA_2,5/4-G; number of pins: 04; pin pitch: 7.50mm; Vertical || order number: 1766686 12A 630V +phoenix_contact connector GMSTBVA_01x04_G_7.50mm +0 +4 +4 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBVA_2,5_5-G-7,62_1x05_P7.62mm_Vertical +Generic Phoenix Contact connector footprint for: GMSTBVA_2,5/5-G-7,62; number of pins: 05; pin pitch: 7.62mm; Vertical || order number: 1766806 12A 630V +phoenix_contact connector GMSTBVA_01x05_G_7.62mm +0 +5 +5 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBVA_2,5_5-G_1x05_P7.50mm_Vertical +Generic Phoenix Contact connector footprint for: GMSTBVA_2,5/5-G; number of pins: 05; pin pitch: 7.50mm; Vertical || order number: 1766699 12A 630V +phoenix_contact connector GMSTBVA_01x05_G_7.50mm +0 +5 +5 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBVA_2,5_6-G-7,62_1x06_P7.62mm_Vertical +Generic Phoenix Contact connector footprint for: GMSTBVA_2,5/6-G-7,62; number of pins: 06; pin pitch: 7.62mm; Vertical || order number: 1766819 12A 630V +phoenix_contact connector GMSTBVA_01x06_G_7.62mm +0 +6 +6 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBVA_2,5_6-G_1x06_P7.50mm_Vertical +Generic Phoenix Contact connector footprint for: GMSTBVA_2,5/6-G; number of pins: 06; pin pitch: 7.50mm; Vertical || order number: 1766709 12A 630V +phoenix_contact connector GMSTBVA_01x06_G_7.50mm +0 +6 +6 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBVA_2,5_7-G-7,62_1x07_P7.62mm_Vertical +Generic Phoenix Contact connector footprint for: GMSTBVA_2,5/7-G-7,62; number of pins: 07; pin pitch: 7.62mm; Vertical || order number: 1766822 12A 630V +phoenix_contact connector GMSTBVA_01x07_G_7.62mm +0 +7 +7 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBVA_2,5_7-G_1x07_P7.50mm_Vertical +Generic Phoenix Contact connector footprint for: GMSTBVA_2,5/7-G; number of pins: 07; pin pitch: 7.50mm; Vertical || order number: 1766712 12A 630V +phoenix_contact connector GMSTBVA_01x07_G_7.50mm +0 +7 +7 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBVA_2,5_8-G-7,62_1x08_P7.62mm_Vertical +Generic Phoenix Contact connector footprint for: GMSTBVA_2,5/8-G-7,62; number of pins: 08; pin pitch: 7.62mm; Vertical || order number: 1766835 12A 630V +phoenix_contact connector GMSTBVA_01x08_G_7.62mm +0 +8 +8 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBVA_2,5_8-G_1x08_P7.50mm_Vertical +Generic Phoenix Contact connector footprint for: GMSTBVA_2,5/8-G; number of pins: 08; pin pitch: 7.50mm; Vertical || order number: 1766725 12A 630V +phoenix_contact connector GMSTBVA_01x08_G_7.50mm +0 +8 +8 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBVA_2,5_9-G-7,62_1x09_P7.62mm_Vertical +Generic Phoenix Contact connector footprint for: GMSTBVA_2,5/9-G-7,62; number of pins: 09; pin pitch: 7.62mm; Vertical || order number: 1766848 12A 630V +phoenix_contact connector GMSTBVA_01x09_G_7.62mm +0 +9 +9 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBVA_2,5_9-G_1x09_P7.50mm_Vertical +Generic Phoenix Contact connector footprint for: GMSTBVA_2,5/9-G; number of pins: 09; pin pitch: 7.50mm; Vertical || order number: 1766738 12A 630V +phoenix_contact connector GMSTBVA_01x09_G_7.50mm +0 +9 +9 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBVA_2,5_10-G-7,62_1x10_P7.62mm_Vertical +Generic Phoenix Contact connector footprint for: GMSTBVA_2,5/10-G-7,62; number of pins: 10; pin pitch: 7.62mm; Vertical || order number: 1766851 12A 630V +phoenix_contact connector GMSTBVA_01x10_G_7.62mm +0 +10 +10 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBVA_2,5_10-G_1x10_P7.50mm_Vertical +Generic Phoenix Contact connector footprint for: GMSTBVA_2,5/10-G; number of pins: 10; pin pitch: 7.50mm; Vertical || order number: 1766741 12A 630V +phoenix_contact connector GMSTBVA_01x10_G_7.50mm +0 +10 +10 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBVA_2,5_11-G-7,62_1x11_P7.62mm_Vertical +Generic Phoenix Contact connector footprint for: GMSTBVA_2,5/11-G-7,62; number of pins: 11; pin pitch: 7.62mm; Vertical || order number: 1766864 12A 630V +phoenix_contact connector GMSTBVA_01x11_G_7.62mm +0 +11 +11 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBVA_2,5_11-G_1x11_P7.50mm_Vertical +Generic Phoenix Contact connector footprint for: GMSTBVA_2,5/11-G; number of pins: 11; pin pitch: 7.50mm; Vertical || order number: 1766754 12A 630V +phoenix_contact connector GMSTBVA_01x11_G_7.50mm +0 +11 +11 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBVA_2,5_12-G-7,62_1x12_P7.62mm_Vertical +Generic Phoenix Contact connector footprint for: GMSTBVA_2,5/12-G-7,62; number of pins: 12; pin pitch: 7.62mm; Vertical || order number: 1766877 12A 630V +phoenix_contact connector GMSTBVA_01x12_G_7.62mm +0 +12 +12 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBVA_2,5_12-G_1x12_P7.50mm_Vertical +Generic Phoenix Contact connector footprint for: GMSTBVA_2,5/12-G; number of pins: 12; pin pitch: 7.50mm; Vertical || order number: 1766767 12A 630V +phoenix_contact connector GMSTBVA_01x12_G_7.50mm +0 +12 +12 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBV_2,5_2-GF-7,62_1x02_P7.62mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: GMSTBV_2,5/2-GF-7,62; number of pins: 02; pin pitch: 7.62mm; Vertical; threaded flange || order number: 1829154 12A 630V +phoenix_contact connector GMSTBV_01x02_GF_7.62mm +0 +2 +2 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBV_2,5_2-GF-7,62_1x02_P7.62mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: GMSTBV_2,5/2-GF-7,62; number of pins: 02; pin pitch: 7.62mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1829154 12A 630V +phoenix_contact connector GMSTBV_01x02_GF_7.62mm_MH +0 +2 +2 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBV_2,5_3-GF-7,62_1x03_P7.62mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: GMSTBV_2,5/3-GF-7,62; number of pins: 03; pin pitch: 7.62mm; Vertical; threaded flange || order number: 1829167 12A 630V +phoenix_contact connector GMSTBV_01x03_GF_7.62mm +0 +3 +3 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBV_2,5_3-GF-7,62_1x03_P7.62mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: GMSTBV_2,5/3-GF-7,62; number of pins: 03; pin pitch: 7.62mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1829167 12A 630V +phoenix_contact connector GMSTBV_01x03_GF_7.62mm_MH +0 +3 +3 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBV_2,5_4-GF-7,62_1x04_P7.62mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: GMSTBV_2,5/4-GF-7,62; number of pins: 04; pin pitch: 7.62mm; Vertical; threaded flange || order number: 1829170 12A 630V +phoenix_contact connector GMSTBV_01x04_GF_7.62mm +0 +4 +4 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBV_2,5_4-GF-7,62_1x04_P7.62mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: GMSTBV_2,5/4-GF-7,62; number of pins: 04; pin pitch: 7.62mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1829170 12A 630V +phoenix_contact connector GMSTBV_01x04_GF_7.62mm_MH +0 +4 +4 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBV_2,5_5-GF-7,62_1x05_P7.62mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: GMSTBV_2,5/5-GF-7,62; number of pins: 05; pin pitch: 7.62mm; Vertical; threaded flange || order number: 1829183 12A 630V +phoenix_contact connector GMSTBV_01x05_GF_7.62mm +0 +5 +5 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBV_2,5_5-GF-7,62_1x05_P7.62mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: GMSTBV_2,5/5-GF-7,62; number of pins: 05; pin pitch: 7.62mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1829183 12A 630V +phoenix_contact connector GMSTBV_01x05_GF_7.62mm_MH +0 +5 +5 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBV_2,5_6-GF-7,62_1x06_P7.62mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: GMSTBV_2,5/6-GF-7,62; number of pins: 06; pin pitch: 7.62mm; Vertical; threaded flange || order number: 1829196 12A 630V +phoenix_contact connector GMSTBV_01x06_GF_7.62mm +0 +6 +6 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBV_2,5_6-GF-7,62_1x06_P7.62mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: GMSTBV_2,5/6-GF-7,62; number of pins: 06; pin pitch: 7.62mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1829196 12A 630V +phoenix_contact connector GMSTBV_01x06_GF_7.62mm_MH +0 +6 +6 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBV_2,5_7-GF-7,62_1x07_P7.62mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: GMSTBV_2,5/7-GF-7,62; number of pins: 07; pin pitch: 7.62mm; Vertical; threaded flange || order number: 1829206 12A 630V +phoenix_contact connector GMSTBV_01x07_GF_7.62mm +0 +7 +7 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBV_2,5_7-GF-7,62_1x07_P7.62mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: GMSTBV_2,5/7-GF-7,62; number of pins: 07; pin pitch: 7.62mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1829206 12A 630V +phoenix_contact connector GMSTBV_01x07_GF_7.62mm_MH +0 +7 +7 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBV_2,5_8-GF-7,62_1x08_P7.62mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: GMSTBV_2,5/8-GF-7,62; number of pins: 08; pin pitch: 7.62mm; Vertical; threaded flange || order number: 1829219 12A 630V +phoenix_contact connector GMSTBV_01x08_GF_7.62mm +0 +8 +8 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBV_2,5_8-GF-7,62_1x08_P7.62mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: GMSTBV_2,5/8-GF-7,62; number of pins: 08; pin pitch: 7.62mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1829219 12A 630V +phoenix_contact connector GMSTBV_01x08_GF_7.62mm_MH +0 +8 +8 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBV_2,5_9-GF-7,62_1x09_P7.62mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: GMSTBV_2,5/9-GF-7,62; number of pins: 09; pin pitch: 7.62mm; Vertical; threaded flange || order number: 1829222 12A 630V +phoenix_contact connector GMSTBV_01x09_GF_7.62mm +0 +9 +9 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBV_2,5_9-GF-7,62_1x09_P7.62mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: GMSTBV_2,5/9-GF-7,62; number of pins: 09; pin pitch: 7.62mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1829222 12A 630V +phoenix_contact connector GMSTBV_01x09_GF_7.62mm_MH +0 +9 +9 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBV_2,5_10-GF-7,62_1x10_P7.62mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: GMSTBV_2,5/10-GF-7,62; number of pins: 10; pin pitch: 7.62mm; Vertical; threaded flange || order number: 1829235 12A 630V +phoenix_contact connector GMSTBV_01x10_GF_7.62mm +0 +10 +10 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBV_2,5_10-GF-7,62_1x10_P7.62mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: GMSTBV_2,5/10-GF-7,62; number of pins: 10; pin pitch: 7.62mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1829235 12A 630V +phoenix_contact connector GMSTBV_01x10_GF_7.62mm_MH +0 +10 +10 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBV_2,5_11-GF-7,62_1x11_P7.62mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: GMSTBV_2,5/11-GF-7,62; number of pins: 11; pin pitch: 7.62mm; Vertical; threaded flange || order number: 1829248 12A 630V +phoenix_contact connector GMSTBV_01x11_GF_7.62mm +0 +11 +11 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBV_2,5_11-GF-7,62_1x11_P7.62mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: GMSTBV_2,5/11-GF-7,62; number of pins: 11; pin pitch: 7.62mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1829248 12A 630V +phoenix_contact connector GMSTBV_01x11_GF_7.62mm_MH +0 +11 +11 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBV_2,5_12-GF-7,62_1x12_P7.62mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: GMSTBV_2,5/12-GF-7,62; number of pins: 12; pin pitch: 7.62mm; Vertical; threaded flange || order number: 1829251 12A 630V +phoenix_contact connector GMSTBV_01x12_GF_7.62mm +0 +12 +12 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTBV_2,5_12-GF-7,62_1x12_P7.62mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: GMSTBV_2,5/12-GF-7,62; number of pins: 12; pin pitch: 7.62mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1829251 12A 630V +phoenix_contact connector GMSTBV_01x12_GF_7.62mm_MH +0 +12 +12 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTB_2,5_2-GF-7,62_1x02_P7.62mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: GMSTB_2,5/2-GF-7,62; number of pins: 02; pin pitch: 7.62mm; Angled; threaded flange || order number: 1806229 12A 630V +phoenix_contact connector GMSTB_01x02_GF_7.62mm +0 +2 +2 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTB_2,5_2-GF-7,62_1x02_P7.62mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: GMSTB_2,5/2-GF-7,62; number of pins: 02; pin pitch: 7.62mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1806229 12A 630V +phoenix_contact connector GMSTB_01x02_GF_7.62mm_MH +0 +2 +2 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTB_2,5_3-GF-7,62_1x03_P7.62mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: GMSTB_2,5/3-GF-7,62; number of pins: 03; pin pitch: 7.62mm; Angled; threaded flange || order number: 1806232 12A 630V +phoenix_contact connector GMSTB_01x03_GF_7.62mm +0 +3 +3 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTB_2,5_3-GF-7,62_1x03_P7.62mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: GMSTB_2,5/3-GF-7,62; number of pins: 03; pin pitch: 7.62mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1806232 12A 630V +phoenix_contact connector GMSTB_01x03_GF_7.62mm_MH +0 +3 +3 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTB_2,5_4-GF-7,62_1x04_P7.62mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: GMSTB_2,5/4-GF-7,62; number of pins: 04; pin pitch: 7.62mm; Angled; threaded flange || order number: 1806245 12A 630V +phoenix_contact connector GMSTB_01x04_GF_7.62mm +0 +4 +4 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTB_2,5_4-GF-7,62_1x04_P7.62mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: GMSTB_2,5/4-GF-7,62; number of pins: 04; pin pitch: 7.62mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1806245 12A 630V +phoenix_contact connector GMSTB_01x04_GF_7.62mm_MH +0 +4 +4 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTB_2,5_5-GF-7,62_1x05_P7.62mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: GMSTB_2,5/5-GF-7,62; number of pins: 05; pin pitch: 7.62mm; Angled; threaded flange || order number: 1806258 12A 630V +phoenix_contact connector GMSTB_01x05_GF_7.62mm +0 +5 +5 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTB_2,5_5-GF-7,62_1x05_P7.62mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: GMSTB_2,5/5-GF-7,62; number of pins: 05; pin pitch: 7.62mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1806258 12A 630V +phoenix_contact connector GMSTB_01x05_GF_7.62mm_MH +0 +5 +5 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTB_2,5_6-GF-7,62_1x06_P7.62mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: GMSTB_2,5/6-GF-7,62; number of pins: 06; pin pitch: 7.62mm; Angled; threaded flange || order number: 1806261 12A 630V +phoenix_contact connector GMSTB_01x06_GF_7.62mm +0 +6 +6 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTB_2,5_6-GF-7,62_1x06_P7.62mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: GMSTB_2,5/6-GF-7,62; number of pins: 06; pin pitch: 7.62mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1806261 12A 630V +phoenix_contact connector GMSTB_01x06_GF_7.62mm_MH +0 +6 +6 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTB_2,5_7-GF-7,62_1x07_P7.62mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: GMSTB_2,5/7-GF-7,62; number of pins: 07; pin pitch: 7.62mm; Angled; threaded flange || order number: 1806274 12A 630V +phoenix_contact connector GMSTB_01x07_GF_7.62mm +0 +7 +7 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTB_2,5_7-GF-7,62_1x07_P7.62mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: GMSTB_2,5/7-GF-7,62; number of pins: 07; pin pitch: 7.62mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1806274 12A 630V +phoenix_contact connector GMSTB_01x07_GF_7.62mm_MH +0 +7 +7 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTB_2,5_8-GF-7,62_1x08_P7.62mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: GMSTB_2,5/8-GF-7,62; number of pins: 08; pin pitch: 7.62mm; Angled; threaded flange || order number: 1806287 12A 630V +phoenix_contact connector GMSTB_01x08_GF_7.62mm +0 +8 +8 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTB_2,5_8-GF-7,62_1x08_P7.62mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: GMSTB_2,5/8-GF-7,62; number of pins: 08; pin pitch: 7.62mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1806287 12A 630V +phoenix_contact connector GMSTB_01x08_GF_7.62mm_MH +0 +8 +8 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTB_2,5_9-GF-7,62_1x09_P7.62mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: GMSTB_2,5/9-GF-7,62; number of pins: 09; pin pitch: 7.62mm; Angled; threaded flange || order number: 1806290 12A 630V +phoenix_contact connector GMSTB_01x09_GF_7.62mm +0 +9 +9 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTB_2,5_9-GF-7,62_1x09_P7.62mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: GMSTB_2,5/9-GF-7,62; number of pins: 09; pin pitch: 7.62mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1806290 12A 630V +phoenix_contact connector GMSTB_01x09_GF_7.62mm_MH +0 +9 +9 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTB_2,5_10-GF-7,62_1x10_P7.62mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: GMSTB_2,5/10-GF-7,62; number of pins: 10; pin pitch: 7.62mm; Angled; threaded flange || order number: 1806300 12A 630V +phoenix_contact connector GMSTB_01x10_GF_7.62mm +0 +10 +10 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTB_2,5_10-GF-7,62_1x10_P7.62mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: GMSTB_2,5/10-GF-7,62; number of pins: 10; pin pitch: 7.62mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1806300 12A 630V +phoenix_contact connector GMSTB_01x10_GF_7.62mm_MH +0 +10 +10 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTB_2,5_11-GF-7,62_1x11_P7.62mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: GMSTB_2,5/11-GF-7,62; number of pins: 11; pin pitch: 7.62mm; Angled; threaded flange || order number: 1806313 12A 630V +phoenix_contact connector GMSTB_01x11_GF_7.62mm +0 +11 +11 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTB_2,5_11-GF-7,62_1x11_P7.62mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: GMSTB_2,5/11-GF-7,62; number of pins: 11; pin pitch: 7.62mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1806313 12A 630V +phoenix_contact connector GMSTB_01x11_GF_7.62mm_MH +0 +11 +11 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTB_2,5_12-GF-7,62_1x12_P7.62mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: GMSTB_2,5/12-GF-7,62; number of pins: 12; pin pitch: 7.62mm; Angled; threaded flange || order number: 1806326 12A 630V +phoenix_contact connector GMSTB_01x12_GF_7.62mm +0 +12 +12 +Connector_Phoenix_GMSTB +PhoenixContact_GMSTB_2,5_12-GF-7,62_1x12_P7.62mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: GMSTB_2,5/12-GF-7,62; number of pins: 12; pin pitch: 7.62mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1806326 12A 630V +phoenix_contact connector GMSTB_01x12_GF_7.62mm_MH +0 +12 +12 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_2-G-3.5_1x02_P3.50mm_Vertical +Generic Phoenix Contact connector footprint for: MCV_1,5/2-G-3.5; number of pins: 02; pin pitch: 3.50mm; Vertical || order number: 1843606 8A 160V +phoenix_contact connector MCV_01x02_G_3.5mm +0 +2 +2 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_2-G-3.81_1x02_P3.81mm_Vertical +Generic Phoenix Contact connector footprint for: MCV_1,5/2-G-3.81; number of pins: 02; pin pitch: 3.81mm; Vertical || order number: 1803426 8A 160V +phoenix_contact connector MCV_01x02_G_3.81mm +0 +2 +2 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_2-GF-3.5_1x02_P3.50mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MCV_1,5/2-GF-3.5; number of pins: 02; pin pitch: 3.50mm; Vertical; threaded flange || order number: 1843224 8A 160V +phoenix_contact connector MCV_01x02_GF_3.5mm +0 +2 +2 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_2-GF-3.5_1x02_P3.50mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MCV_1,5/2-GF-3.5; number of pins: 02; pin pitch: 3.50mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843224 8A 160V +phoenix_contact connector MCV_01x02_GF_3.5mm_MH +0 +2 +2 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_2-GF-3.81_1x02_P3.81mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MCV_1,5/2-GF-3.81; number of pins: 02; pin pitch: 3.81mm; Vertical; threaded flange || order number: 1830596 8A 160V +phoenix_contact connector MCV_01x02_GF_3.81mm +0 +2 +2 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_2-GF-3.81_1x02_P3.81mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MCV_1,5/2-GF-3.81; number of pins: 02; pin pitch: 3.81mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1830596 8A 160V +phoenix_contact connector MCV_01x02_GF_3.81mm_MH +0 +2 +2 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_3-G-3.5_1x03_P3.50mm_Vertical +Generic Phoenix Contact connector footprint for: MCV_1,5/3-G-3.5; number of pins: 03; pin pitch: 3.50mm; Vertical || order number: 1843619 8A 160V +phoenix_contact connector MCV_01x03_G_3.5mm +0 +3 +3 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_3-G-3.81_1x03_P3.81mm_Vertical +Generic Phoenix Contact connector footprint for: MCV_1,5/3-G-3.81; number of pins: 03; pin pitch: 3.81mm; Vertical || order number: 1803439 8A 160V +phoenix_contact connector MCV_01x03_G_3.81mm +0 +3 +3 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_3-GF-3.5_1x03_P3.50mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MCV_1,5/3-GF-3.5; number of pins: 03; pin pitch: 3.50mm; Vertical; threaded flange || order number: 1843237 8A 160V +phoenix_contact connector MCV_01x03_GF_3.5mm +0 +3 +3 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_3-GF-3.5_1x03_P3.50mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MCV_1,5/3-GF-3.5; number of pins: 03; pin pitch: 3.50mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843237 8A 160V +phoenix_contact connector MCV_01x03_GF_3.5mm_MH +0 +3 +3 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_3-GF-3.81_1x03_P3.81mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MCV_1,5/3-GF-3.81; number of pins: 03; pin pitch: 3.81mm; Vertical; threaded flange || order number: 1830606 8A 160V +phoenix_contact connector MCV_01x03_GF_3.81mm +0 +3 +3 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_3-GF-3.81_1x03_P3.81mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MCV_1,5/3-GF-3.81; number of pins: 03; pin pitch: 3.81mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1830606 8A 160V +phoenix_contact connector MCV_01x03_GF_3.81mm_MH +0 +3 +3 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_4-G-3.5_1x04_P3.50mm_Vertical +Generic Phoenix Contact connector footprint for: MCV_1,5/4-G-3.5; number of pins: 04; pin pitch: 3.50mm; Vertical || order number: 1843622 8A 160V +phoenix_contact connector MCV_01x04_G_3.5mm +0 +4 +4 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_4-G-3.81_1x04_P3.81mm_Vertical +Generic Phoenix Contact connector footprint for: MCV_1,5/4-G-3.81; number of pins: 04; pin pitch: 3.81mm; Vertical || order number: 1803442 8A 160V +phoenix_contact connector MCV_01x04_G_3.81mm +0 +4 +4 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_4-GF-3.5_1x04_P3.50mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MCV_1,5/4-GF-3.5; number of pins: 04; pin pitch: 3.50mm; Vertical; threaded flange || order number: 1843240 8A 160V +phoenix_contact connector MCV_01x04_GF_3.5mm +0 +4 +4 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_4-GF-3.5_1x04_P3.50mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MCV_1,5/4-GF-3.5; number of pins: 04; pin pitch: 3.50mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843240 8A 160V +phoenix_contact connector MCV_01x04_GF_3.5mm_MH +0 +4 +4 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_4-GF-3.81_1x04_P3.81mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MCV_1,5/4-GF-3.81; number of pins: 04; pin pitch: 3.81mm; Vertical; threaded flange || order number: 1830619 8A 160V +phoenix_contact connector MCV_01x04_GF_3.81mm +0 +4 +4 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_4-GF-3.81_1x04_P3.81mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MCV_1,5/4-GF-3.81; number of pins: 04; pin pitch: 3.81mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1830619 8A 160V +phoenix_contact connector MCV_01x04_GF_3.81mm_MH +0 +4 +4 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_5-G-3.5_1x05_P3.50mm_Vertical +Generic Phoenix Contact connector footprint for: MCV_1,5/5-G-3.5; number of pins: 05; pin pitch: 3.50mm; Vertical || order number: 1843635 8A 160V +phoenix_contact connector MCV_01x05_G_3.5mm +0 +5 +5 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_5-G-3.81_1x05_P3.81mm_Vertical +Generic Phoenix Contact connector footprint for: MCV_1,5/5-G-3.81; number of pins: 05; pin pitch: 3.81mm; Vertical || order number: 1803455 8A 160V +phoenix_contact connector MCV_01x05_G_3.81mm +0 +5 +5 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_5-GF-3.5_1x05_P3.50mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MCV_1,5/5-GF-3.5; number of pins: 05; pin pitch: 3.50mm; Vertical; threaded flange || order number: 1843253 8A 160V +phoenix_contact connector MCV_01x05_GF_3.5mm +0 +5 +5 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_5-GF-3.5_1x05_P3.50mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MCV_1,5/5-GF-3.5; number of pins: 05; pin pitch: 3.50mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843253 8A 160V +phoenix_contact connector MCV_01x05_GF_3.5mm_MH +0 +5 +5 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_5-GF-3.81_1x05_P3.81mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MCV_1,5/5-GF-3.81; number of pins: 05; pin pitch: 3.81mm; Vertical; threaded flange || order number: 1830622 8A 160V +phoenix_contact connector MCV_01x05_GF_3.81mm +0 +5 +5 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_5-GF-3.81_1x05_P3.81mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MCV_1,5/5-GF-3.81; number of pins: 05; pin pitch: 3.81mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1830622 8A 160V +phoenix_contact connector MCV_01x05_GF_3.81mm_MH +0 +5 +5 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_6-G-3.5_1x06_P3.50mm_Vertical +Generic Phoenix Contact connector footprint for: MCV_1,5/6-G-3.5; number of pins: 06; pin pitch: 3.50mm; Vertical || order number: 1843648 8A 160V +phoenix_contact connector MCV_01x06_G_3.5mm +0 +6 +6 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_6-G-3.81_1x06_P3.81mm_Vertical +Generic Phoenix Contact connector footprint for: MCV_1,5/6-G-3.81; number of pins: 06; pin pitch: 3.81mm; Vertical || order number: 1803468 8A 160V +phoenix_contact connector MCV_01x06_G_3.81mm +0 +6 +6 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_6-GF-3.5_1x06_P3.50mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MCV_1,5/6-GF-3.5; number of pins: 06; pin pitch: 3.50mm; Vertical; threaded flange || order number: 1843266 8A 160V +phoenix_contact connector MCV_01x06_GF_3.5mm +0 +6 +6 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_6-GF-3.5_1x06_P3.50mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MCV_1,5/6-GF-3.5; number of pins: 06; pin pitch: 3.50mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843266 8A 160V +phoenix_contact connector MCV_01x06_GF_3.5mm_MH +0 +6 +6 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_6-GF-3.81_1x06_P3.81mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MCV_1,5/6-GF-3.81; number of pins: 06; pin pitch: 3.81mm; Vertical; threaded flange || order number: 1830635 8A 160V +phoenix_contact connector MCV_01x06_GF_3.81mm +0 +6 +6 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_6-GF-3.81_1x06_P3.81mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MCV_1,5/6-GF-3.81; number of pins: 06; pin pitch: 3.81mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1830635 8A 160V +phoenix_contact connector MCV_01x06_GF_3.81mm_MH +0 +6 +6 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_7-G-3.5_1x07_P3.50mm_Vertical +Generic Phoenix Contact connector footprint for: MCV_1,5/7-G-3.5; number of pins: 07; pin pitch: 3.50mm; Vertical || order number: 1843651 8A 160V +phoenix_contact connector MCV_01x07_G_3.5mm +0 +7 +7 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_7-G-3.81_1x07_P3.81mm_Vertical +Generic Phoenix Contact connector footprint for: MCV_1,5/7-G-3.81; number of pins: 07; pin pitch: 3.81mm; Vertical || order number: 1803471 8A 160V +phoenix_contact connector MCV_01x07_G_3.81mm +0 +7 +7 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_7-GF-3.5_1x07_P3.50mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MCV_1,5/7-GF-3.5; number of pins: 07; pin pitch: 3.50mm; Vertical; threaded flange || order number: 1843279 8A 160V +phoenix_contact connector MCV_01x07_GF_3.5mm +0 +7 +7 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_7-GF-3.5_1x07_P3.50mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MCV_1,5/7-GF-3.5; number of pins: 07; pin pitch: 3.50mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843279 8A 160V +phoenix_contact connector MCV_01x07_GF_3.5mm_MH +0 +7 +7 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_7-GF-3.81_1x07_P3.81mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MCV_1,5/7-GF-3.81; number of pins: 07; pin pitch: 3.81mm; Vertical; threaded flange || order number: 1830648 8A 160V +phoenix_contact connector MCV_01x07_GF_3.81mm +0 +7 +7 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_7-GF-3.81_1x07_P3.81mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MCV_1,5/7-GF-3.81; number of pins: 07; pin pitch: 3.81mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1830648 8A 160V +phoenix_contact connector MCV_01x07_GF_3.81mm_MH +0 +7 +7 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_8-G-3.5_1x08_P3.50mm_Vertical +Generic Phoenix Contact connector footprint for: MCV_1,5/8-G-3.5; number of pins: 08; pin pitch: 3.50mm; Vertical || order number: 1843664 8A 160V +phoenix_contact connector MCV_01x08_G_3.5mm +0 +8 +8 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_8-G-3.81_1x08_P3.81mm_Vertical +Generic Phoenix Contact connector footprint for: MCV_1,5/8-G-3.81; number of pins: 08; pin pitch: 3.81mm; Vertical || order number: 1803484 8A 160V +phoenix_contact connector MCV_01x08_G_3.81mm +0 +8 +8 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_8-GF-3.5_1x08_P3.50mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MCV_1,5/8-GF-3.5; number of pins: 08; pin pitch: 3.50mm; Vertical; threaded flange || order number: 1843282 8A 160V +phoenix_contact connector MCV_01x08_GF_3.5mm +0 +8 +8 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_8-GF-3.5_1x08_P3.50mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MCV_1,5/8-GF-3.5; number of pins: 08; pin pitch: 3.50mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843282 8A 160V +phoenix_contact connector MCV_01x08_GF_3.5mm_MH +0 +8 +8 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_8-GF-3.81_1x08_P3.81mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MCV_1,5/8-GF-3.81; number of pins: 08; pin pitch: 3.81mm; Vertical; threaded flange || order number: 1830651 8A 160V +phoenix_contact connector MCV_01x08_GF_3.81mm +0 +8 +8 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_8-GF-3.81_1x08_P3.81mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MCV_1,5/8-GF-3.81; number of pins: 08; pin pitch: 3.81mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1830651 8A 160V +phoenix_contact connector MCV_01x08_GF_3.81mm_MH +0 +8 +8 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_9-G-3.5_1x09_P3.50mm_Vertical +Generic Phoenix Contact connector footprint for: MCV_1,5/9-G-3.5; number of pins: 09; pin pitch: 3.50mm; Vertical || order number: 1843677 8A 160V +phoenix_contact connector MCV_01x09_G_3.5mm +0 +9 +9 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_9-G-3.81_1x09_P3.81mm_Vertical +Generic Phoenix Contact connector footprint for: MCV_1,5/9-G-3.81; number of pins: 09; pin pitch: 3.81mm; Vertical || order number: 1803497 8A 160V +phoenix_contact connector MCV_01x09_G_3.81mm +0 +9 +9 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_9-GF-3.5_1x09_P3.50mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MCV_1,5/9-GF-3.5; number of pins: 09; pin pitch: 3.50mm; Vertical; threaded flange || order number: 1843295 8A 160V +phoenix_contact connector MCV_01x09_GF_3.5mm +0 +9 +9 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_9-GF-3.5_1x09_P3.50mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MCV_1,5/9-GF-3.5; number of pins: 09; pin pitch: 3.50mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843295 8A 160V +phoenix_contact connector MCV_01x09_GF_3.5mm_MH +0 +9 +9 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_9-GF-3.81_1x09_P3.81mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MCV_1,5/9-GF-3.81; number of pins: 09; pin pitch: 3.81mm; Vertical; threaded flange || order number: 1830664 8A 160V +phoenix_contact connector MCV_01x09_GF_3.81mm +0 +9 +9 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_9-GF-3.81_1x09_P3.81mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MCV_1,5/9-GF-3.81; number of pins: 09; pin pitch: 3.81mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1830664 8A 160V +phoenix_contact connector MCV_01x09_GF_3.81mm_MH +0 +9 +9 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_10-G-3.5_1x10_P3.50mm_Vertical +Generic Phoenix Contact connector footprint for: MCV_1,5/10-G-3.5; number of pins: 10; pin pitch: 3.50mm; Vertical || order number: 1843680 8A 160V +phoenix_contact connector MCV_01x10_G_3.5mm +0 +10 +10 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_10-G-3.81_1x10_P3.81mm_Vertical +Generic Phoenix Contact connector footprint for: MCV_1,5/10-G-3.81; number of pins: 10; pin pitch: 3.81mm; Vertical || order number: 1803507 8A 160V +phoenix_contact connector MCV_01x10_G_3.81mm +0 +10 +10 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_10-GF-3.5_1x10_P3.50mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MCV_1,5/10-GF-3.5; number of pins: 10; pin pitch: 3.50mm; Vertical; threaded flange || order number: 1843305 8A 160V +phoenix_contact connector MCV_01x10_GF_3.5mm +0 +10 +10 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_10-GF-3.5_1x10_P3.50mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MCV_1,5/10-GF-3.5; number of pins: 10; pin pitch: 3.50mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843305 8A 160V +phoenix_contact connector MCV_01x10_GF_3.5mm_MH +0 +10 +10 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_10-GF-3.81_1x10_P3.81mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MCV_1,5/10-GF-3.81; number of pins: 10; pin pitch: 3.81mm; Vertical; threaded flange || order number: 1830677 8A 160V +phoenix_contact connector MCV_01x10_GF_3.81mm +0 +10 +10 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_10-GF-3.81_1x10_P3.81mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MCV_1,5/10-GF-3.81; number of pins: 10; pin pitch: 3.81mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1830677 8A 160V +phoenix_contact connector MCV_01x10_GF_3.81mm_MH +0 +10 +10 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_11-G-3.5_1x11_P3.50mm_Vertical +Generic Phoenix Contact connector footprint for: MCV_1,5/11-G-3.5; number of pins: 11; pin pitch: 3.50mm; Vertical || order number: 1843693 8A 160V +phoenix_contact connector MCV_01x11_G_3.5mm +0 +11 +11 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_11-G-3.81_1x11_P3.81mm_Vertical +Generic Phoenix Contact connector footprint for: MCV_1,5/11-G-3.81; number of pins: 11; pin pitch: 3.81mm; Vertical || order number: 1803510 8A 160V +phoenix_contact connector MCV_01x11_G_3.81mm +0 +11 +11 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_11-GF-3.5_1x11_P3.50mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MCV_1,5/11-GF-3.5; number of pins: 11; pin pitch: 3.50mm; Vertical; threaded flange || order number: 1843318 8A 160V +phoenix_contact connector MCV_01x11_GF_3.5mm +0 +11 +11 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_11-GF-3.5_1x11_P3.50mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MCV_1,5/11-GF-3.5; number of pins: 11; pin pitch: 3.50mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843318 8A 160V +phoenix_contact connector MCV_01x11_GF_3.5mm_MH +0 +11 +11 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_11-GF-3.81_1x11_P3.81mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MCV_1,5/11-GF-3.81; number of pins: 11; pin pitch: 3.81mm; Vertical; threaded flange || order number: 1830680 8A 160V +phoenix_contact connector MCV_01x11_GF_3.81mm +0 +11 +11 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_11-GF-3.81_1x11_P3.81mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MCV_1,5/11-GF-3.81; number of pins: 11; pin pitch: 3.81mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1830680 8A 160V +phoenix_contact connector MCV_01x11_GF_3.81mm_MH +0 +11 +11 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_12-G-3.5_1x12_P3.50mm_Vertical +Generic Phoenix Contact connector footprint for: MCV_1,5/12-G-3.5; number of pins: 12; pin pitch: 3.50mm; Vertical || order number: 1843703 8A 160V +phoenix_contact connector MCV_01x12_G_3.5mm +0 +12 +12 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_12-G-3.81_1x12_P3.81mm_Vertical +Generic Phoenix Contact connector footprint for: MCV_1,5/12-G-3.81; number of pins: 12; pin pitch: 3.81mm; Vertical || order number: 1803523 8A 160V +phoenix_contact connector MCV_01x12_G_3.81mm +0 +12 +12 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_12-GF-3.5_1x12_P3.50mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MCV_1,5/12-GF-3.5; number of pins: 12; pin pitch: 3.50mm; Vertical; threaded flange || order number: 1843321 8A 160V +phoenix_contact connector MCV_01x12_GF_3.5mm +0 +12 +12 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_12-GF-3.5_1x12_P3.50mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MCV_1,5/12-GF-3.5; number of pins: 12; pin pitch: 3.50mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843321 8A 160V +phoenix_contact connector MCV_01x12_GF_3.5mm_MH +0 +12 +12 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_12-GF-3.81_1x12_P3.81mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MCV_1,5/12-GF-3.81; number of pins: 12; pin pitch: 3.81mm; Vertical; threaded flange || order number: 1830693 8A 160V +phoenix_contact connector MCV_01x12_GF_3.81mm +0 +12 +12 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_12-GF-3.81_1x12_P3.81mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MCV_1,5/12-GF-3.81; number of pins: 12; pin pitch: 3.81mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1830693 8A 160V +phoenix_contact connector MCV_01x12_GF_3.81mm_MH +0 +12 +12 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_13-G-3.5_1x13_P3.50mm_Vertical +Generic Phoenix Contact connector footprint for: MCV_1,5/13-G-3.5; number of pins: 13; pin pitch: 3.50mm; Vertical || order number: 1843716 8A 160V +phoenix_contact connector MCV_01x13_G_3.5mm +0 +13 +13 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_13-G-3.81_1x13_P3.81mm_Vertical +Generic Phoenix Contact connector footprint for: MCV_1,5/13-G-3.81; number of pins: 13; pin pitch: 3.81mm; Vertical || order number: 1803536 8A 160V +phoenix_contact connector MCV_01x13_G_3.81mm +0 +13 +13 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_13-GF-3.5_1x13_P3.50mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MCV_1,5/13-GF-3.5; number of pins: 13; pin pitch: 3.50mm; Vertical; threaded flange || order number: 1843334 8A 160V +phoenix_contact connector MCV_01x13_GF_3.5mm +0 +13 +13 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_13-GF-3.5_1x13_P3.50mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MCV_1,5/13-GF-3.5; number of pins: 13; pin pitch: 3.50mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843334 8A 160V +phoenix_contact connector MCV_01x13_GF_3.5mm_MH +0 +13 +13 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_13-GF-3.81_1x13_P3.81mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MCV_1,5/13-GF-3.81; number of pins: 13; pin pitch: 3.81mm; Vertical; threaded flange || order number: 1830703 8A 160V +phoenix_contact connector MCV_01x13_GF_3.81mm +0 +13 +13 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_13-GF-3.81_1x13_P3.81mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MCV_1,5/13-GF-3.81; number of pins: 13; pin pitch: 3.81mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1830703 8A 160V +phoenix_contact connector MCV_01x13_GF_3.81mm_MH +0 +13 +13 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_14-G-3.5_1x14_P3.50mm_Vertical +Generic Phoenix Contact connector footprint for: MCV_1,5/14-G-3.5; number of pins: 14; pin pitch: 3.50mm; Vertical || order number: 1843729 8A 160V +phoenix_contact connector MCV_01x14_G_3.5mm +0 +14 +14 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_14-G-3.81_1x14_P3.81mm_Vertical +Generic Phoenix Contact connector footprint for: MCV_1,5/14-G-3.81; number of pins: 14; pin pitch: 3.81mm; Vertical || order number: 1803549 8A 160V +phoenix_contact connector MCV_01x14_G_3.81mm +0 +14 +14 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_14-GF-3.5_1x14_P3.50mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MCV_1,5/14-GF-3.5; number of pins: 14; pin pitch: 3.50mm; Vertical; threaded flange || order number: 1843347 8A 160V +phoenix_contact connector MCV_01x14_GF_3.5mm +0 +14 +14 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_14-GF-3.5_1x14_P3.50mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MCV_1,5/14-GF-3.5; number of pins: 14; pin pitch: 3.50mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843347 8A 160V +phoenix_contact connector MCV_01x14_GF_3.5mm_MH +0 +14 +14 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_14-GF-3.81_1x14_P3.81mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MCV_1,5/14-GF-3.81; number of pins: 14; pin pitch: 3.81mm; Vertical; threaded flange || order number: 1830716 8A 160V +phoenix_contact connector MCV_01x14_GF_3.81mm +0 +14 +14 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_14-GF-3.81_1x14_P3.81mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MCV_1,5/14-GF-3.81; number of pins: 14; pin pitch: 3.81mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1830716 8A 160V +phoenix_contact connector MCV_01x14_GF_3.81mm_MH +0 +14 +14 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_15-G-3.5_1x15_P3.50mm_Vertical +Generic Phoenix Contact connector footprint for: MCV_1,5/15-G-3.5; number of pins: 15; pin pitch: 3.50mm; Vertical || order number: 1843732 8A 160V +phoenix_contact connector MCV_01x15_G_3.5mm +0 +15 +15 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_15-G-3.81_1x15_P3.81mm_Vertical +Generic Phoenix Contact connector footprint for: MCV_1,5/15-G-3.81; number of pins: 15; pin pitch: 3.81mm; Vertical || order number: 1803552 8A 160V +phoenix_contact connector MCV_01x15_G_3.81mm +0 +15 +15 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_15-GF-3.5_1x15_P3.50mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MCV_1,5/15-GF-3.5; number of pins: 15; pin pitch: 3.50mm; Vertical; threaded flange || order number: 1843350 8A 160V +phoenix_contact connector MCV_01x15_GF_3.5mm +0 +15 +15 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_15-GF-3.5_1x15_P3.50mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MCV_1,5/15-GF-3.5; number of pins: 15; pin pitch: 3.50mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843350 8A 160V +phoenix_contact connector MCV_01x15_GF_3.5mm_MH +0 +15 +15 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_15-GF-3.81_1x15_P3.81mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MCV_1,5/15-GF-3.81; number of pins: 15; pin pitch: 3.81mm; Vertical; threaded flange || order number: 1830729 8A 160V +phoenix_contact connector MCV_01x15_GF_3.81mm +0 +15 +15 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_15-GF-3.81_1x15_P3.81mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MCV_1,5/15-GF-3.81; number of pins: 15; pin pitch: 3.81mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1830729 8A 160V +phoenix_contact connector MCV_01x15_GF_3.81mm_MH +0 +15 +15 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_16-G-3.5_1x16_P3.50mm_Vertical +Generic Phoenix Contact connector footprint for: MCV_1,5/16-G-3.5; number of pins: 16; pin pitch: 3.50mm; Vertical || order number: 1843745 8A 160V +phoenix_contact connector MCV_01x16_G_3.5mm +0 +16 +16 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_16-G-3.81_1x16_P3.81mm_Vertical +Generic Phoenix Contact connector footprint for: MCV_1,5/16-G-3.81; number of pins: 16; pin pitch: 3.81mm; Vertical || order number: 1803565 8A 160V +phoenix_contact connector MCV_01x16_G_3.81mm +0 +16 +16 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_16-GF-3.5_1x16_P3.50mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MCV_1,5/16-GF-3.5; number of pins: 16; pin pitch: 3.50mm; Vertical; threaded flange || order number: 1843363 8A 160V +phoenix_contact connector MCV_01x16_GF_3.5mm +0 +16 +16 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_16-GF-3.5_1x16_P3.50mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MCV_1,5/16-GF-3.5; number of pins: 16; pin pitch: 3.50mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843363 8A 160V +phoenix_contact connector MCV_01x16_GF_3.5mm_MH +0 +16 +16 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_16-GF-3.81_1x16_P3.81mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MCV_1,5/16-GF-3.81; number of pins: 16; pin pitch: 3.81mm; Vertical; threaded flange || order number: 1830732 8A 160V +phoenix_contact connector MCV_01x16_GF_3.81mm +0 +16 +16 +Connector_Phoenix_MC +PhoenixContact_MCV_1,5_16-GF-3.81_1x16_P3.81mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MCV_1,5/16-GF-3.81; number of pins: 16; pin pitch: 3.81mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1830732 8A 160V +phoenix_contact connector MCV_01x16_GF_3.81mm_MH +0 +16 +16 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_2-G-3.5_1x02_P3.50mm_Horizontal +Generic Phoenix Contact connector footprint for: MC_1,5/2-G-3.5; number of pins: 02; pin pitch: 3.50mm; Angled || order number: 1844210 8A 160V +phoenix_contact connector MC_01x02_G_3.5mm +0 +2 +2 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_2-G-3.81_1x02_P3.81mm_Horizontal +Generic Phoenix Contact connector footprint for: MC_1,5/2-G-3.81; number of pins: 02; pin pitch: 3.81mm; Angled || order number: 1803277 8A 160V +phoenix_contact connector MC_01x02_G_3.81mm +0 +2 +2 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_2-GF-3.5_1x02_P3.50mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MC_1,5/2-GF-3.5; number of pins: 02; pin pitch: 3.50mm; Angled; threaded flange || order number: 1843790 8A 160V +phoenix_contact connector MC_01x02_GF_3.5mm +0 +2 +2 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_2-GF-3.5_1x02_P3.50mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MC_1,5/2-GF-3.5; number of pins: 02; pin pitch: 3.50mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843790 8A 160V +phoenix_contact connector MC_01x02_GF_3.5mm_MH +0 +2 +2 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_2-GF-3.81_1x02_P3.81mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MC_1,5/2-GF-3.81; number of pins: 02; pin pitch: 3.81mm; Angled; threaded flange || order number: 1827868 8A 160V +phoenix_contact connector MC_01x02_GF_3.81mm +0 +2 +2 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_2-GF-3.81_1x02_P3.81mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MC_1,5/2-GF-3.81; number of pins: 02; pin pitch: 3.81mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1827868 8A 160V +phoenix_contact connector MC_01x02_GF_3.81mm_MH +0 +2 +2 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_3-G-3.5_1x03_P3.50mm_Horizontal +Generic Phoenix Contact connector footprint for: MC_1,5/3-G-3.5; number of pins: 03; pin pitch: 3.50mm; Angled || order number: 1844223 8A 160V +phoenix_contact connector MC_01x03_G_3.5mm +0 +3 +3 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_3-G-3.81_1x03_P3.81mm_Horizontal +Generic Phoenix Contact connector footprint for: MC_1,5/3-G-3.81; number of pins: 03; pin pitch: 3.81mm; Angled || order number: 1803280 8A 160V +phoenix_contact connector MC_01x03_G_3.81mm +0 +3 +3 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_3-GF-3.5_1x03_P3.50mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MC_1,5/3-GF-3.5; number of pins: 03; pin pitch: 3.50mm; Angled; threaded flange || order number: 1843800 8A 160V +phoenix_contact connector MC_01x03_GF_3.5mm +0 +3 +3 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_3-GF-3.5_1x03_P3.50mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MC_1,5/3-GF-3.5; number of pins: 03; pin pitch: 3.50mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843800 8A 160V +phoenix_contact connector MC_01x03_GF_3.5mm_MH +0 +3 +3 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_3-GF-3.81_1x03_P3.81mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MC_1,5/3-GF-3.81; number of pins: 03; pin pitch: 3.81mm; Angled; threaded flange || order number: 1827871 8A 160V +phoenix_contact connector MC_01x03_GF_3.81mm +0 +3 +3 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_3-GF-3.81_1x03_P3.81mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MC_1,5/3-GF-3.81; number of pins: 03; pin pitch: 3.81mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1827871 8A 160V +phoenix_contact connector MC_01x03_GF_3.81mm_MH +0 +3 +3 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_4-G-3.5_1x04_P3.50mm_Horizontal +Generic Phoenix Contact connector footprint for: MC_1,5/4-G-3.5; number of pins: 04; pin pitch: 3.50mm; Angled || order number: 1844236 8A 160V +phoenix_contact connector MC_01x04_G_3.5mm +0 +4 +4 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_4-G-3.81_1x04_P3.81mm_Horizontal +Generic Phoenix Contact connector footprint for: MC_1,5/4-G-3.81; number of pins: 04; pin pitch: 3.81mm; Angled || order number: 1803293 8A 160V +phoenix_contact connector MC_01x04_G_3.81mm +0 +4 +4 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_4-GF-3.5_1x04_P3.50mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MC_1,5/4-GF-3.5; number of pins: 04; pin pitch: 3.50mm; Angled; threaded flange || order number: 1843813 8A 160V +phoenix_contact connector MC_01x04_GF_3.5mm +0 +4 +4 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_4-GF-3.5_1x04_P3.50mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MC_1,5/4-GF-3.5; number of pins: 04; pin pitch: 3.50mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843813 8A 160V +phoenix_contact connector MC_01x04_GF_3.5mm_MH +0 +4 +4 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_4-GF-3.81_1x04_P3.81mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MC_1,5/4-GF-3.81; number of pins: 04; pin pitch: 3.81mm; Angled; threaded flange || order number: 1827884 8A 160V +phoenix_contact connector MC_01x04_GF_3.81mm +0 +4 +4 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_4-GF-3.81_1x04_P3.81mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MC_1,5/4-GF-3.81; number of pins: 04; pin pitch: 3.81mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1827884 8A 160V +phoenix_contact connector MC_01x04_GF_3.81mm_MH +0 +4 +4 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_5-G-3.5_1x05_P3.50mm_Horizontal +Generic Phoenix Contact connector footprint for: MC_1,5/5-G-3.5; number of pins: 05; pin pitch: 3.50mm; Angled || order number: 1844249 8A 160V +phoenix_contact connector MC_01x05_G_3.5mm +0 +5 +5 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_5-G-3.81_1x05_P3.81mm_Horizontal +Generic Phoenix Contact connector footprint for: MC_1,5/5-G-3.81; number of pins: 05; pin pitch: 3.81mm; Angled || order number: 1803303 8A 160V +phoenix_contact connector MC_01x05_G_3.81mm +0 +5 +5 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_5-GF-3.5_1x05_P3.50mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MC_1,5/5-GF-3.5; number of pins: 05; pin pitch: 3.50mm; Angled; threaded flange || order number: 1843826 8A 160V +phoenix_contact connector MC_01x05_GF_3.5mm +0 +5 +5 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_5-GF-3.5_1x05_P3.50mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MC_1,5/5-GF-3.5; number of pins: 05; pin pitch: 3.50mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843826 8A 160V +phoenix_contact connector MC_01x05_GF_3.5mm_MH +0 +5 +5 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_5-GF-3.81_1x05_P3.81mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MC_1,5/5-GF-3.81; number of pins: 05; pin pitch: 3.81mm; Angled; threaded flange || order number: 1827897 8A 160V +phoenix_contact connector MC_01x05_GF_3.81mm +0 +5 +5 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_5-GF-3.81_1x05_P3.81mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MC_1,5/5-GF-3.81; number of pins: 05; pin pitch: 3.81mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1827897 8A 160V +phoenix_contact connector MC_01x05_GF_3.81mm_MH +0 +5 +5 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_6-G-3.5_1x06_P3.50mm_Horizontal +Generic Phoenix Contact connector footprint for: MC_1,5/6-G-3.5; number of pins: 06; pin pitch: 3.50mm; Angled || order number: 1844252 8A 160V +phoenix_contact connector MC_01x06_G_3.5mm +0 +6 +6 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_6-G-3.81_1x06_P3.81mm_Horizontal +Generic Phoenix Contact connector footprint for: MC_1,5/6-G-3.81; number of pins: 06; pin pitch: 3.81mm; Angled || order number: 1803316 8A 160V +phoenix_contact connector MC_01x06_G_3.81mm +0 +6 +6 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_6-GF-3.5_1x06_P3.50mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MC_1,5/6-GF-3.5; number of pins: 06; pin pitch: 3.50mm; Angled; threaded flange || order number: 1843839 8A 160V +phoenix_contact connector MC_01x06_GF_3.5mm +0 +6 +6 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_6-GF-3.5_1x06_P3.50mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MC_1,5/6-GF-3.5; number of pins: 06; pin pitch: 3.50mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843839 8A 160V +phoenix_contact connector MC_01x06_GF_3.5mm_MH +0 +6 +6 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_6-GF-3.81_1x06_P3.81mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MC_1,5/6-GF-3.81; number of pins: 06; pin pitch: 3.81mm; Angled; threaded flange || order number: 1827907 8A 160V +phoenix_contact connector MC_01x06_GF_3.81mm +0 +6 +6 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_6-GF-3.81_1x06_P3.81mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MC_1,5/6-GF-3.81; number of pins: 06; pin pitch: 3.81mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1827907 8A 160V +phoenix_contact connector MC_01x06_GF_3.81mm_MH +0 +6 +6 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_7-G-3.5_1x07_P3.50mm_Horizontal +Generic Phoenix Contact connector footprint for: MC_1,5/7-G-3.5; number of pins: 07; pin pitch: 3.50mm; Angled || order number: 1844265 8A 160V +phoenix_contact connector MC_01x07_G_3.5mm +0 +7 +7 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_7-G-3.81_1x07_P3.81mm_Horizontal +Generic Phoenix Contact connector footprint for: MC_1,5/7-G-3.81; number of pins: 07; pin pitch: 3.81mm; Angled || order number: 1803329 8A 160V +phoenix_contact connector MC_01x07_G_3.81mm +0 +7 +7 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_7-GF-3.5_1x07_P3.50mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MC_1,5/7-GF-3.5; number of pins: 07; pin pitch: 3.50mm; Angled; threaded flange || order number: 1843842 8A 160V +phoenix_contact connector MC_01x07_GF_3.5mm +0 +7 +7 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_7-GF-3.5_1x07_P3.50mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MC_1,5/7-GF-3.5; number of pins: 07; pin pitch: 3.50mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843842 8A 160V +phoenix_contact connector MC_01x07_GF_3.5mm_MH +0 +7 +7 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_7-GF-3.81_1x07_P3.81mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MC_1,5/7-GF-3.81; number of pins: 07; pin pitch: 3.81mm; Angled; threaded flange || order number: 1827910 8A 160V +phoenix_contact connector MC_01x07_GF_3.81mm +0 +7 +7 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_7-GF-3.81_1x07_P3.81mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MC_1,5/7-GF-3.81; number of pins: 07; pin pitch: 3.81mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1827910 8A 160V +phoenix_contact connector MC_01x07_GF_3.81mm_MH +0 +7 +7 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_8-G-3.5_1x08_P3.50mm_Horizontal +Generic Phoenix Contact connector footprint for: MC_1,5/8-G-3.5; number of pins: 08; pin pitch: 3.50mm; Angled || order number: 1844278 8A 160V +phoenix_contact connector MC_01x08_G_3.5mm +0 +8 +8 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_8-G-3.81_1x08_P3.81mm_Horizontal +Generic Phoenix Contact connector footprint for: MC_1,5/8-G-3.81; number of pins: 08; pin pitch: 3.81mm; Angled || order number: 1803332 8A 160V +phoenix_contact connector MC_01x08_G_3.81mm +0 +8 +8 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_8-GF-3.5_1x08_P3.50mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MC_1,5/8-GF-3.5; number of pins: 08; pin pitch: 3.50mm; Angled; threaded flange || order number: 1843855 8A 160V +phoenix_contact connector MC_01x08_GF_3.5mm +0 +8 +8 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_8-GF-3.5_1x08_P3.50mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MC_1,5/8-GF-3.5; number of pins: 08; pin pitch: 3.50mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843855 8A 160V +phoenix_contact connector MC_01x08_GF_3.5mm_MH +0 +8 +8 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_8-GF-3.81_1x08_P3.81mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MC_1,5/8-GF-3.81; number of pins: 08; pin pitch: 3.81mm; Angled; threaded flange || order number: 1827923 8A 160V +phoenix_contact connector MC_01x08_GF_3.81mm +0 +8 +8 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_8-GF-3.81_1x08_P3.81mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MC_1,5/8-GF-3.81; number of pins: 08; pin pitch: 3.81mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1827923 8A 160V +phoenix_contact connector MC_01x08_GF_3.81mm_MH +0 +8 +8 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_9-G-3.5_1x09_P3.50mm_Horizontal +Generic Phoenix Contact connector footprint for: MC_1,5/9-G-3.5; number of pins: 09; pin pitch: 3.50mm; Angled || order number: 1844281 8A 160V +phoenix_contact connector MC_01x09_G_3.5mm +0 +9 +9 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_9-G-3.81_1x09_P3.81mm_Horizontal +Generic Phoenix Contact connector footprint for: MC_1,5/9-G-3.81; number of pins: 09; pin pitch: 3.81mm; Angled || order number: 1803345 8A 160V +phoenix_contact connector MC_01x09_G_3.81mm +0 +9 +9 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_9-GF-3.5_1x09_P3.50mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MC_1,5/9-GF-3.5; number of pins: 09; pin pitch: 3.50mm; Angled; threaded flange || order number: 1843868 8A 160V +phoenix_contact connector MC_01x09_GF_3.5mm +0 +9 +9 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_9-GF-3.5_1x09_P3.50mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MC_1,5/9-GF-3.5; number of pins: 09; pin pitch: 3.50mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843868 8A 160V +phoenix_contact connector MC_01x09_GF_3.5mm_MH +0 +9 +9 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_9-GF-3.81_1x09_P3.81mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MC_1,5/9-GF-3.81; number of pins: 09; pin pitch: 3.81mm; Angled; threaded flange || order number: 1827936 8A 160V +phoenix_contact connector MC_01x09_GF_3.81mm +0 +9 +9 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_9-GF-3.81_1x09_P3.81mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MC_1,5/9-GF-3.81; number of pins: 09; pin pitch: 3.81mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1827936 8A 160V +phoenix_contact connector MC_01x09_GF_3.81mm_MH +0 +9 +9 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_10-G-3.5_1x10_P3.50mm_Horizontal +Generic Phoenix Contact connector footprint for: MC_1,5/10-G-3.5; number of pins: 10; pin pitch: 3.50mm; Angled || order number: 1844294 8A 160V +phoenix_contact connector MC_01x10_G_3.5mm +0 +10 +10 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_10-G-3.81_1x10_P3.81mm_Horizontal +Generic Phoenix Contact connector footprint for: MC_1,5/10-G-3.81; number of pins: 10; pin pitch: 3.81mm; Angled || order number: 1803358 8A 160V +phoenix_contact connector MC_01x10_G_3.81mm +0 +10 +10 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_10-GF-3.5_1x10_P3.50mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MC_1,5/10-GF-3.5; number of pins: 10; pin pitch: 3.50mm; Angled; threaded flange || order number: 1843871 8A 160V +phoenix_contact connector MC_01x10_GF_3.5mm +0 +10 +10 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_10-GF-3.5_1x10_P3.50mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MC_1,5/10-GF-3.5; number of pins: 10; pin pitch: 3.50mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843871 8A 160V +phoenix_contact connector MC_01x10_GF_3.5mm_MH +0 +10 +10 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_10-GF-3.81_1x10_P3.81mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MC_1,5/10-GF-3.81; number of pins: 10; pin pitch: 3.81mm; Angled; threaded flange || order number: 1827949 8A 160V +phoenix_contact connector MC_01x10_GF_3.81mm +0 +10 +10 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_10-GF-3.81_1x10_P3.81mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MC_1,5/10-GF-3.81; number of pins: 10; pin pitch: 3.81mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1827949 8A 160V +phoenix_contact connector MC_01x10_GF_3.81mm_MH +0 +10 +10 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_11-G-3.5_1x11_P3.50mm_Horizontal +Generic Phoenix Contact connector footprint for: MC_1,5/11-G-3.5; number of pins: 11; pin pitch: 3.50mm; Angled || order number: 1844304 8A 160V +phoenix_contact connector MC_01x11_G_3.5mm +0 +11 +11 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_11-G-3.81_1x11_P3.81mm_Horizontal +Generic Phoenix Contact connector footprint for: MC_1,5/11-G-3.81; number of pins: 11; pin pitch: 3.81mm; Angled || order number: 1803361 8A 160V +phoenix_contact connector MC_01x11_G_3.81mm +0 +11 +11 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_11-GF-3.5_1x11_P3.50mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MC_1,5/11-GF-3.5; number of pins: 11; pin pitch: 3.50mm; Angled; threaded flange || order number: 1843884 8A 160V +phoenix_contact connector MC_01x11_GF_3.5mm +0 +11 +11 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_11-GF-3.5_1x11_P3.50mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MC_1,5/11-GF-3.5; number of pins: 11; pin pitch: 3.50mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843884 8A 160V +phoenix_contact connector MC_01x11_GF_3.5mm_MH +0 +11 +11 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_11-GF-3.81_1x11_P3.81mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MC_1,5/11-GF-3.81; number of pins: 11; pin pitch: 3.81mm; Angled; threaded flange || order number: 1827952 8A 160V +phoenix_contact connector MC_01x11_GF_3.81mm +0 +11 +11 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_11-GF-3.81_1x11_P3.81mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MC_1,5/11-GF-3.81; number of pins: 11; pin pitch: 3.81mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1827952 8A 160V +phoenix_contact connector MC_01x11_GF_3.81mm_MH +0 +11 +11 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_12-G-3.5_1x12_P3.50mm_Horizontal +Generic Phoenix Contact connector footprint for: MC_1,5/12-G-3.5; number of pins: 12; pin pitch: 3.50mm; Angled || order number: 1844317 8A 160V +phoenix_contact connector MC_01x12_G_3.5mm +0 +12 +12 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_12-G-3.81_1x12_P3.81mm_Horizontal +Generic Phoenix Contact connector footprint for: MC_1,5/12-G-3.81; number of pins: 12; pin pitch: 3.81mm; Angled || order number: 1803374 8A 160V +phoenix_contact connector MC_01x12_G_3.81mm +0 +12 +12 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_12-GF-3.5_1x12_P3.50mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MC_1,5/12-GF-3.5; number of pins: 12; pin pitch: 3.50mm; Angled; threaded flange || order number: 1843897 8A 160V +phoenix_contact connector MC_01x12_GF_3.5mm +0 +12 +12 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_12-GF-3.5_1x12_P3.50mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MC_1,5/12-GF-3.5; number of pins: 12; pin pitch: 3.50mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843897 8A 160V +phoenix_contact connector MC_01x12_GF_3.5mm_MH +0 +12 +12 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_12-GF-3.81_1x12_P3.81mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MC_1,5/12-GF-3.81; number of pins: 12; pin pitch: 3.81mm; Angled; threaded flange || order number: 1827965 8A 160V +phoenix_contact connector MC_01x12_GF_3.81mm +0 +12 +12 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_12-GF-3.81_1x12_P3.81mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MC_1,5/12-GF-3.81; number of pins: 12; pin pitch: 3.81mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1827965 8A 160V +phoenix_contact connector MC_01x12_GF_3.81mm_MH +0 +12 +12 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_13-G-3.5_1x13_P3.50mm_Horizontal +Generic Phoenix Contact connector footprint for: MC_1,5/13-G-3.5; number of pins: 13; pin pitch: 3.50mm; Angled || order number: 1844320 8A 160V +phoenix_contact connector MC_01x13_G_3.5mm +0 +13 +13 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_13-G-3.81_1x13_P3.81mm_Horizontal +Generic Phoenix Contact connector footprint for: MC_1,5/13-G-3.81; number of pins: 13; pin pitch: 3.81mm; Angled || order number: 1803387 8A 160V +phoenix_contact connector MC_01x13_G_3.81mm +0 +13 +13 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_13-GF-3.5_1x13_P3.50mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MC_1,5/13-GF-3.5; number of pins: 13; pin pitch: 3.50mm; Angled; threaded flange || order number: 1843907 8A 160V +phoenix_contact connector MC_01x13_GF_3.5mm +0 +13 +13 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_13-GF-3.5_1x13_P3.50mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MC_1,5/13-GF-3.5; number of pins: 13; pin pitch: 3.50mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843907 8A 160V +phoenix_contact connector MC_01x13_GF_3.5mm_MH +0 +13 +13 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_13-GF-3.81_1x13_P3.81mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MC_1,5/13-GF-3.81; number of pins: 13; pin pitch: 3.81mm; Angled; threaded flange || order number: 1827978 8A 160V +phoenix_contact connector MC_01x13_GF_3.81mm +0 +13 +13 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_13-GF-3.81_1x13_P3.81mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MC_1,5/13-GF-3.81; number of pins: 13; pin pitch: 3.81mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1827978 8A 160V +phoenix_contact connector MC_01x13_GF_3.81mm_MH +0 +13 +13 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_14-G-3.5_1x14_P3.50mm_Horizontal +Generic Phoenix Contact connector footprint for: MC_1,5/14-G-3.5; number of pins: 14; pin pitch: 3.50mm; Angled || order number: 1844333 8A 160V +phoenix_contact connector MC_01x14_G_3.5mm +0 +14 +14 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_14-G-3.81_1x14_P3.81mm_Horizontal +Generic Phoenix Contact connector footprint for: MC_1,5/14-G-3.81; number of pins: 14; pin pitch: 3.81mm; Angled || order number: 1803390 8A 160V +phoenix_contact connector MC_01x14_G_3.81mm +0 +14 +14 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_14-GF-3.5_1x14_P3.50mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MC_1,5/14-GF-3.5; number of pins: 14; pin pitch: 3.50mm; Angled; threaded flange || order number: 1843910 8A 160V +phoenix_contact connector MC_01x14_GF_3.5mm +0 +14 +14 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_14-GF-3.5_1x14_P3.50mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MC_1,5/14-GF-3.5; number of pins: 14; pin pitch: 3.50mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843910 8A 160V +phoenix_contact connector MC_01x14_GF_3.5mm_MH +0 +14 +14 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_14-GF-3.81_1x14_P3.81mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MC_1,5/14-GF-3.81; number of pins: 14; pin pitch: 3.81mm; Angled; threaded flange || order number: 1827981 8A 160V +phoenix_contact connector MC_01x14_GF_3.81mm +0 +14 +14 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_14-GF-3.81_1x14_P3.81mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MC_1,5/14-GF-3.81; number of pins: 14; pin pitch: 3.81mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1827981 8A 160V +phoenix_contact connector MC_01x14_GF_3.81mm_MH +0 +14 +14 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_15-G-3.5_1x15_P3.50mm_Horizontal +Generic Phoenix Contact connector footprint for: MC_1,5/15-G-3.5; number of pins: 15; pin pitch: 3.50mm; Angled || order number: 1844346 8A 160V +phoenix_contact connector MC_01x15_G_3.5mm +0 +15 +15 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_15-G-3.81_1x15_P3.81mm_Horizontal +Generic Phoenix Contact connector footprint for: MC_1,5/15-G-3.81; number of pins: 15; pin pitch: 3.81mm; Angled || order number: 1803400 8A 160V +phoenix_contact connector MC_01x15_G_3.81mm +0 +15 +15 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_15-GF-3.5_1x15_P3.50mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MC_1,5/15-GF-3.5; number of pins: 15; pin pitch: 3.50mm; Angled; threaded flange || order number: 1843923 8A 160V +phoenix_contact connector MC_01x15_GF_3.5mm +0 +15 +15 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_15-GF-3.5_1x15_P3.50mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MC_1,5/15-GF-3.5; number of pins: 15; pin pitch: 3.50mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843923 8A 160V +phoenix_contact connector MC_01x15_GF_3.5mm_MH +0 +15 +15 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_15-GF-3.81_1x15_P3.81mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MC_1,5/15-GF-3.81; number of pins: 15; pin pitch: 3.81mm; Angled; threaded flange || order number: 1827994 8A 160V +phoenix_contact connector MC_01x15_GF_3.81mm +0 +15 +15 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_15-GF-3.81_1x15_P3.81mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MC_1,5/15-GF-3.81; number of pins: 15; pin pitch: 3.81mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1827994 8A 160V +phoenix_contact connector MC_01x15_GF_3.81mm_MH +0 +15 +15 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_16-G-3.5_1x16_P3.50mm_Horizontal +Generic Phoenix Contact connector footprint for: MC_1,5/16-G-3.5; number of pins: 16; pin pitch: 3.50mm; Angled || order number: 1844359 8A 160V +phoenix_contact connector MC_01x16_G_3.5mm +0 +16 +16 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_16-G-3.81_1x16_P3.81mm_Horizontal +Generic Phoenix Contact connector footprint for: MC_1,5/16-G-3.81; number of pins: 16; pin pitch: 3.81mm; Angled || order number: 1803413 8A 160V +phoenix_contact connector MC_01x16_G_3.81mm +0 +16 +16 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_16-GF-3.5_1x16_P3.50mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MC_1,5/16-GF-3.5; number of pins: 16; pin pitch: 3.50mm; Angled; threaded flange || order number: 1843936 8A 160V +phoenix_contact connector MC_01x16_GF_3.5mm +0 +16 +16 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_16-GF-3.5_1x16_P3.50mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MC_1,5/16-GF-3.5; number of pins: 16; pin pitch: 3.50mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1843936 8A 160V +phoenix_contact connector MC_01x16_GF_3.5mm_MH +0 +16 +16 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_16-GF-3.81_1x16_P3.81mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MC_1,5/16-GF-3.81; number of pins: 16; pin pitch: 3.81mm; Angled; threaded flange || order number: 1828003 8A 160V +phoenix_contact connector MC_01x16_GF_3.81mm +0 +16 +16 +Connector_Phoenix_MC +PhoenixContact_MC_1,5_16-GF-3.81_1x16_P3.81mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MC_1,5/16-GF-3.81; number of pins: 16; pin pitch: 3.81mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1828003 8A 160V +phoenix_contact connector MC_01x16_GF_3.81mm_MH +0 +16 +16 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MCV_1,5_2-G-5.08_1x02_P5.08mm_Vertical +Generic Phoenix Contact connector footprint for: MCV_1,5/2-G-5.08; number of pins: 02; pin pitch: 5.08mm; Vertical || order number: 1836299 8A 320V +phoenix_contact connector MCV_01x02_G_5.08mm +0 +2 +2 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MCV_1,5_2-GF-5.08_1x02_P5.08mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MCV_1,5/2-GF-5.08; number of pins: 02; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1847615 8A 320V +phoenix_contact connector MCV_01x02_GF_5.08mm +0 +2 +2 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MCV_1,5_2-GF-5.08_1x02_P5.08mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MCV_1,5/2-GF-5.08; number of pins: 02; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1847615 8A 320V +phoenix_contact connector MCV_01x02_GF_5.08mm_MH +0 +2 +2 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MCV_1,5_3-G-5.08_1x03_P5.08mm_Vertical +Generic Phoenix Contact connector footprint for: MCV_1,5/3-G-5.08; number of pins: 03; pin pitch: 5.08mm; Vertical || order number: 1836309 8A 320V +phoenix_contact connector MCV_01x03_G_5.08mm +0 +3 +3 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MCV_1,5_3-GF-5.08_1x03_P5.08mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MCV_1,5/3-GF-5.08; number of pins: 03; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1847628 8A 320V +phoenix_contact connector MCV_01x03_GF_5.08mm +0 +3 +3 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MCV_1,5_3-GF-5.08_1x03_P5.08mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MCV_1,5/3-GF-5.08; number of pins: 03; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1847628 8A 320V +phoenix_contact connector MCV_01x03_GF_5.08mm_MH +0 +3 +3 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MCV_1,5_4-G-5.08_1x04_P5.08mm_Vertical +Generic Phoenix Contact connector footprint for: MCV_1,5/4-G-5.08; number of pins: 04; pin pitch: 5.08mm; Vertical || order number: 1836312 8A 320V +phoenix_contact connector MCV_01x04_G_5.08mm +0 +4 +4 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MCV_1,5_4-GF-5.08_1x04_P5.08mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MCV_1,5/4-GF-5.08; number of pins: 04; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1847631 8A 320V +phoenix_contact connector MCV_01x04_GF_5.08mm +0 +4 +4 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MCV_1,5_4-GF-5.08_1x04_P5.08mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MCV_1,5/4-GF-5.08; number of pins: 04; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1847631 8A 320V +phoenix_contact connector MCV_01x04_GF_5.08mm_MH +0 +4 +4 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MCV_1,5_5-G-5.08_1x05_P5.08mm_Vertical +Generic Phoenix Contact connector footprint for: MCV_1,5/5-G-5.08; number of pins: 05; pin pitch: 5.08mm; Vertical || order number: 1836325 8A 320V +phoenix_contact connector MCV_01x05_G_5.08mm +0 +5 +5 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MCV_1,5_5-GF-5.08_1x05_P5.08mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MCV_1,5/5-GF-5.08; number of pins: 05; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1847644 8A 320V +phoenix_contact connector MCV_01x05_GF_5.08mm +0 +5 +5 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MCV_1,5_5-GF-5.08_1x05_P5.08mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MCV_1,5/5-GF-5.08; number of pins: 05; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1847644 8A 320V +phoenix_contact connector MCV_01x05_GF_5.08mm_MH +0 +5 +5 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MCV_1,5_6-G-5.08_1x06_P5.08mm_Vertical +Generic Phoenix Contact connector footprint for: MCV_1,5/6-G-5.08; number of pins: 06; pin pitch: 5.08mm; Vertical || order number: 1836338 8A 320V +phoenix_contact connector MCV_01x06_G_5.08mm +0 +6 +6 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MCV_1,5_6-GF-5.08_1x06_P5.08mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MCV_1,5/6-GF-5.08; number of pins: 06; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1847657 8A 320V +phoenix_contact connector MCV_01x06_GF_5.08mm +0 +6 +6 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MCV_1,5_6-GF-5.08_1x06_P5.08mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MCV_1,5/6-GF-5.08; number of pins: 06; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1847657 8A 320V +phoenix_contact connector MCV_01x06_GF_5.08mm_MH +0 +6 +6 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MCV_1,5_7-G-5.08_1x07_P5.08mm_Vertical +Generic Phoenix Contact connector footprint for: MCV_1,5/7-G-5.08; number of pins: 07; pin pitch: 5.08mm; Vertical || order number: 1836341 8A 320V +phoenix_contact connector MCV_01x07_G_5.08mm +0 +7 +7 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MCV_1,5_7-GF-5.08_1x07_P5.08mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MCV_1,5/7-GF-5.08; number of pins: 07; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1847660 8A 320V +phoenix_contact connector MCV_01x07_GF_5.08mm +0 +7 +7 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MCV_1,5_7-GF-5.08_1x07_P5.08mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MCV_1,5/7-GF-5.08; number of pins: 07; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1847660 8A 320V +phoenix_contact connector MCV_01x07_GF_5.08mm_MH +0 +7 +7 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MCV_1,5_8-G-5.08_1x08_P5.08mm_Vertical +Generic Phoenix Contact connector footprint for: MCV_1,5/8-G-5.08; number of pins: 08; pin pitch: 5.08mm; Vertical || order number: 1836354 8A 320V +phoenix_contact connector MCV_01x08_G_5.08mm +0 +8 +8 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MCV_1,5_8-GF-5.08_1x08_P5.08mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MCV_1,5/8-GF-5.08; number of pins: 08; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1847673 8A 320V +phoenix_contact connector MCV_01x08_GF_5.08mm +0 +8 +8 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MCV_1,5_8-GF-5.08_1x08_P5.08mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MCV_1,5/8-GF-5.08; number of pins: 08; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1847673 8A 320V +phoenix_contact connector MCV_01x08_GF_5.08mm_MH +0 +8 +8 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MCV_1,5_9-G-5.08_1x09_P5.08mm_Vertical +Generic Phoenix Contact connector footprint for: MCV_1,5/9-G-5.08; number of pins: 09; pin pitch: 5.08mm; Vertical || order number: 1836367 8A 320V +phoenix_contact connector MCV_01x09_G_5.08mm +0 +9 +9 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MCV_1,5_9-GF-5.08_1x09_P5.08mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MCV_1,5/9-GF-5.08; number of pins: 09; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1847686 8A 320V +phoenix_contact connector MCV_01x09_GF_5.08mm +0 +9 +9 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MCV_1,5_9-GF-5.08_1x09_P5.08mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MCV_1,5/9-GF-5.08; number of pins: 09; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1847686 8A 320V +phoenix_contact connector MCV_01x09_GF_5.08mm_MH +0 +9 +9 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MCV_1,5_10-G-5.08_1x10_P5.08mm_Vertical +Generic Phoenix Contact connector footprint for: MCV_1,5/10-G-5.08; number of pins: 10; pin pitch: 5.08mm; Vertical || order number: 1836370 8A 320V +phoenix_contact connector MCV_01x10_G_5.08mm +0 +10 +10 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MCV_1,5_10-GF-5.08_1x10_P5.08mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MCV_1,5/10-GF-5.08; number of pins: 10; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1847699 8A 320V +phoenix_contact connector MCV_01x10_GF_5.08mm +0 +10 +10 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MCV_1,5_10-GF-5.08_1x10_P5.08mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MCV_1,5/10-GF-5.08; number of pins: 10; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1847699 8A 320V +phoenix_contact connector MCV_01x10_GF_5.08mm_MH +0 +10 +10 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MCV_1,5_11-G-5.08_1x11_P5.08mm_Vertical +Generic Phoenix Contact connector footprint for: MCV_1,5/11-G-5.08; number of pins: 11; pin pitch: 5.08mm; Vertical || order number: 1836383 8A 320V +phoenix_contact connector MCV_01x11_G_5.08mm +0 +11 +11 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MCV_1,5_11-GF-5.08_1x11_P5.08mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MCV_1,5/11-GF-5.08; number of pins: 11; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1847709 8A 320V +phoenix_contact connector MCV_01x11_GF_5.08mm +0 +11 +11 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MCV_1,5_11-GF-5.08_1x11_P5.08mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MCV_1,5/11-GF-5.08; number of pins: 11; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1847709 8A 320V +phoenix_contact connector MCV_01x11_GF_5.08mm_MH +0 +11 +11 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MCV_1,5_12-G-5.08_1x12_P5.08mm_Vertical +Generic Phoenix Contact connector footprint for: MCV_1,5/12-G-5.08; number of pins: 12; pin pitch: 5.08mm; Vertical || order number: 1836396 8A 320V +phoenix_contact connector MCV_01x12_G_5.08mm +0 +12 +12 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MCV_1,5_12-GF-5.08_1x12_P5.08mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MCV_1,5/12-GF-5.08; number of pins: 12; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1847712 8A 320V +phoenix_contact connector MCV_01x12_GF_5.08mm +0 +12 +12 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MCV_1,5_12-GF-5.08_1x12_P5.08mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MCV_1,5/12-GF-5.08; number of pins: 12; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1847712 8A 320V +phoenix_contact connector MCV_01x12_GF_5.08mm_MH +0 +12 +12 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MC_1,5_2-G-5.08_1x02_P5.08mm_Horizontal +Generic Phoenix Contact connector footprint for: MC_1,5/2-G-5.08; number of pins: 02; pin pitch: 5.08mm; Angled || order number: 1836189 8A 320V +phoenix_contact connector MC_01x02_G_5.08mm +0 +2 +2 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MC_1,5_2-GF-5.08_1x02_P5.08mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MC_1,5/2-GF-5.08; number of pins: 02; pin pitch: 5.08mm; Angled; threaded flange || order number: 1847466 8A 320V +phoenix_contact connector MC_01x02_GF_5.08mm +0 +2 +2 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MC_1,5_2-GF-5.08_1x02_P5.08mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MC_1,5/2-GF-5.08; number of pins: 02; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1847466 8A 320V +phoenix_contact connector MC_01x02_GF_5.08mm_MH +0 +2 +2 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MC_1,5_3-G-5.08_1x03_P5.08mm_Horizontal +Generic Phoenix Contact connector footprint for: MC_1,5/3-G-5.08; number of pins: 03; pin pitch: 5.08mm; Angled || order number: 1836192 8A 320V +phoenix_contact connector MC_01x03_G_5.08mm +0 +3 +3 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MC_1,5_3-GF-5.08_1x03_P5.08mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MC_1,5/3-GF-5.08; number of pins: 03; pin pitch: 5.08mm; Angled; threaded flange || order number: 1847479 8A 320V +phoenix_contact connector MC_01x03_GF_5.08mm +0 +3 +3 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MC_1,5_3-GF-5.08_1x03_P5.08mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MC_1,5/3-GF-5.08; number of pins: 03; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1847479 8A 320V +phoenix_contact connector MC_01x03_GF_5.08mm_MH +0 +3 +3 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MC_1,5_4-G-5.08_1x04_P5.08mm_Horizontal +Generic Phoenix Contact connector footprint for: MC_1,5/4-G-5.08; number of pins: 04; pin pitch: 5.08mm; Angled || order number: 1836202 8A 320V +phoenix_contact connector MC_01x04_G_5.08mm +0 +4 +4 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MC_1,5_4-GF-5.08_1x04_P5.08mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MC_1,5/4-GF-5.08; number of pins: 04; pin pitch: 5.08mm; Angled; threaded flange || order number: 1847482 8A 320V +phoenix_contact connector MC_01x04_GF_5.08mm +0 +4 +4 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MC_1,5_4-GF-5.08_1x04_P5.08mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MC_1,5/4-GF-5.08; number of pins: 04; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1847482 8A 320V +phoenix_contact connector MC_01x04_GF_5.08mm_MH +0 +4 +4 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MC_1,5_5-G-5.08_1x05_P5.08mm_Horizontal +Generic Phoenix Contact connector footprint for: MC_1,5/5-G-5.08; number of pins: 05; pin pitch: 5.08mm; Angled || order number: 1836215 8A 320V +phoenix_contact connector MC_01x05_G_5.08mm +0 +5 +5 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MC_1,5_5-GF-5.08_1x05_P5.08mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MC_1,5/5-GF-5.08; number of pins: 05; pin pitch: 5.08mm; Angled; threaded flange || order number: 1847495 8A 320V +phoenix_contact connector MC_01x05_GF_5.08mm +0 +5 +5 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MC_1,5_5-GF-5.08_1x05_P5.08mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MC_1,5/5-GF-5.08; number of pins: 05; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1847495 8A 320V +phoenix_contact connector MC_01x05_GF_5.08mm_MH +0 +5 +5 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MC_1,5_6-G-5.08_1x06_P5.08mm_Horizontal +Generic Phoenix Contact connector footprint for: MC_1,5/6-G-5.08; number of pins: 06; pin pitch: 5.08mm; Angled || order number: 1836228 8A 320V +phoenix_contact connector MC_01x06_G_5.08mm +0 +6 +6 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MC_1,5_6-GF-5.08_1x06_P5.08mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MC_1,5/6-GF-5.08; number of pins: 06; pin pitch: 5.08mm; Angled; threaded flange || order number: 1847505 8A 320V +phoenix_contact connector MC_01x06_GF_5.08mm +0 +6 +6 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MC_1,5_6-GF-5.08_1x06_P5.08mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MC_1,5/6-GF-5.08; number of pins: 06; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1847505 8A 320V +phoenix_contact connector MC_01x06_GF_5.08mm_MH +0 +6 +6 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MC_1,5_7-G-5.08_1x07_P5.08mm_Horizontal +Generic Phoenix Contact connector footprint for: MC_1,5/7-G-5.08; number of pins: 07; pin pitch: 5.08mm; Angled || order number: 1836231 8A 320V +phoenix_contact connector MC_01x07_G_5.08mm +0 +7 +7 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MC_1,5_7-GF-5.08_1x07_P5.08mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MC_1,5/7-GF-5.08; number of pins: 07; pin pitch: 5.08mm; Angled; threaded flange || order number: 1847518 8A 320V +phoenix_contact connector MC_01x07_GF_5.08mm +0 +7 +7 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MC_1,5_7-GF-5.08_1x07_P5.08mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MC_1,5/7-GF-5.08; number of pins: 07; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1847518 8A 320V +phoenix_contact connector MC_01x07_GF_5.08mm_MH +0 +7 +7 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MC_1,5_8-G-5.08_1x08_P5.08mm_Horizontal +Generic Phoenix Contact connector footprint for: MC_1,5/8-G-5.08; number of pins: 08; pin pitch: 5.08mm; Angled || order number: 1836244 8A 320V +phoenix_contact connector MC_01x08_G_5.08mm +0 +8 +8 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MC_1,5_8-GF-5.08_1x08_P5.08mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MC_1,5/8-GF-5.08; number of pins: 08; pin pitch: 5.08mm; Angled; threaded flange || order number: 1847521 8A 320V +phoenix_contact connector MC_01x08_GF_5.08mm +0 +8 +8 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MC_1,5_8-GF-5.08_1x08_P5.08mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MC_1,5/8-GF-5.08; number of pins: 08; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1847521 8A 320V +phoenix_contact connector MC_01x08_GF_5.08mm_MH +0 +8 +8 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MC_1,5_9-G-5.08_1x09_P5.08mm_Horizontal +Generic Phoenix Contact connector footprint for: MC_1,5/9-G-5.08; number of pins: 09; pin pitch: 5.08mm; Angled || order number: 1836257 8A 320V +phoenix_contact connector MC_01x09_G_5.08mm +0 +9 +9 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MC_1,5_9-GF-5.08_1x09_P5.08mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MC_1,5/9-GF-5.08; number of pins: 09; pin pitch: 5.08mm; Angled; threaded flange || order number: 1847534 8A 320V +phoenix_contact connector MC_01x09_GF_5.08mm +0 +9 +9 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MC_1,5_9-GF-5.08_1x09_P5.08mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MC_1,5/9-GF-5.08; number of pins: 09; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1847534 8A 320V +phoenix_contact connector MC_01x09_GF_5.08mm_MH +0 +9 +9 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MC_1,5_10-G-5.08_1x10_P5.08mm_Horizontal +Generic Phoenix Contact connector footprint for: MC_1,5/10-G-5.08; number of pins: 10; pin pitch: 5.08mm; Angled || order number: 1836260 8A 320V +phoenix_contact connector MC_01x10_G_5.08mm +0 +10 +10 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MC_1,5_10-GF-5.08_1x10_P5.08mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MC_1,5/10-GF-5.08; number of pins: 10; pin pitch: 5.08mm; Angled; threaded flange || order number: 1847547 8A 320V +phoenix_contact connector MC_01x10_GF_5.08mm +0 +10 +10 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MC_1,5_10-GF-5.08_1x10_P5.08mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MC_1,5/10-GF-5.08; number of pins: 10; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1847547 8A 320V +phoenix_contact connector MC_01x10_GF_5.08mm_MH +0 +10 +10 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MC_1,5_11-G-5.08_1x11_P5.08mm_Horizontal +Generic Phoenix Contact connector footprint for: MC_1,5/11-G-5.08; number of pins: 11; pin pitch: 5.08mm; Angled || order number: 1836273 8A 320V +phoenix_contact connector MC_01x11_G_5.08mm +0 +11 +11 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MC_1,5_11-GF-5.08_1x11_P5.08mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MC_1,5/11-GF-5.08; number of pins: 11; pin pitch: 5.08mm; Angled; threaded flange || order number: 1847550 8A 320V +phoenix_contact connector MC_01x11_GF_5.08mm +0 +11 +11 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MC_1,5_11-GF-5.08_1x11_P5.08mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MC_1,5/11-GF-5.08; number of pins: 11; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1847550 8A 320V +phoenix_contact connector MC_01x11_GF_5.08mm_MH +0 +11 +11 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MC_1,5_12-G-5.08_1x12_P5.08mm_Horizontal +Generic Phoenix Contact connector footprint for: MC_1,5/12-G-5.08; number of pins: 12; pin pitch: 5.08mm; Angled || order number: 1836286 8A 320V +phoenix_contact connector MC_01x12_G_5.08mm +0 +12 +12 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MC_1,5_12-GF-5.08_1x12_P5.08mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MC_1,5/12-GF-5.08; number of pins: 12; pin pitch: 5.08mm; Angled; threaded flange || order number: 1847563 8A 320V +phoenix_contact connector MC_01x12_GF_5.08mm +0 +12 +12 +Connector_Phoenix_MC_HighVoltage +PhoenixContact_MC_1,5_12-GF-5.08_1x12_P5.08mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MC_1,5/12-GF-5.08; number of pins: 12; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x4.5 C or ISO 7049-ST 2.2x4.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1847563 8A 320V +phoenix_contact connector MC_01x12_GF_5.08mm_MH +0 +12 +12 +Connector_Phoenix_MSTB +PhoenixContact_MSTBA_2,5_2-G-5,08_1x02_P5.08mm_Horizontal +Generic Phoenix Contact connector footprint for: MSTBA_2,5/2-G-5,08; number of pins: 02; pin pitch: 5.08mm; Angled || order number: 1757242 12A || order number: 1923869 16A (HC) +phoenix_contact connector MSTBA_01x02_G_5.08mm +0 +2 +2 +Connector_Phoenix_MSTB +PhoenixContact_MSTBA_2,5_2-G_1x02_P5.00mm_Horizontal +Generic Phoenix Contact connector footprint for: MSTBA_2,5/2-G; number of pins: 02; pin pitch: 5.00mm; Angled || order number: 1757475 12A || order number: 1923759 16A (HC) +phoenix_contact connector MSTBA_01x02_G_5.00mm +0 +2 +2 +Connector_Phoenix_MSTB +PhoenixContact_MSTBA_2,5_3-G-5,08_1x03_P5.08mm_Horizontal +Generic Phoenix Contact connector footprint for: MSTBA_2,5/3-G-5,08; number of pins: 03; pin pitch: 5.08mm; Angled || order number: 1757255 12A || order number: 1923872 16A (HC) +phoenix_contact connector MSTBA_01x03_G_5.08mm +0 +3 +3 +Connector_Phoenix_MSTB +PhoenixContact_MSTBA_2,5_3-G_1x03_P5.00mm_Horizontal +Generic Phoenix Contact connector footprint for: MSTBA_2,5/3-G; number of pins: 03; pin pitch: 5.00mm; Angled || order number: 1757488 12A || order number: 1923762 16A (HC) +phoenix_contact connector MSTBA_01x03_G_5.00mm +0 +3 +3 +Connector_Phoenix_MSTB +PhoenixContact_MSTBA_2,5_4-G-5,08_1x04_P5.08mm_Horizontal +Generic Phoenix Contact connector footprint for: MSTBA_2,5/4-G-5,08; number of pins: 04; pin pitch: 5.08mm; Angled || order number: 1757268 12A || order number: 1923885 16A (HC) +phoenix_contact connector MSTBA_01x04_G_5.08mm +0 +4 +4 +Connector_Phoenix_MSTB +PhoenixContact_MSTBA_2,5_4-G_1x04_P5.00mm_Horizontal +Generic Phoenix Contact connector footprint for: MSTBA_2,5/4-G; number of pins: 04; pin pitch: 5.00mm; Angled || order number: 1757491 12A || order number: 1923775 16A (HC) +phoenix_contact connector MSTBA_01x04_G_5.00mm +0 +4 +4 +Connector_Phoenix_MSTB +PhoenixContact_MSTBA_2,5_5-G-5,08_1x05_P5.08mm_Horizontal +Generic Phoenix Contact connector footprint for: MSTBA_2,5/5-G-5,08; number of pins: 05; pin pitch: 5.08mm; Angled || order number: 1757271 12A || order number: 1923898 16A (HC) +phoenix_contact connector MSTBA_01x05_G_5.08mm +0 +5 +5 +Connector_Phoenix_MSTB +PhoenixContact_MSTBA_2,5_5-G_1x05_P5.00mm_Horizontal +Generic Phoenix Contact connector footprint for: MSTBA_2,5/5-G; number of pins: 05; pin pitch: 5.00mm; Angled || order number: 1757501 12A || order number: 1923788 16A (HC) +phoenix_contact connector MSTBA_01x05_G_5.00mm +0 +5 +5 +Connector_Phoenix_MSTB +PhoenixContact_MSTBA_2,5_6-G-5,08_1x06_P5.08mm_Horizontal +Generic Phoenix Contact connector footprint for: MSTBA_2,5/6-G-5,08; number of pins: 06; pin pitch: 5.08mm; Angled || order number: 1757284 12A || order number: 1923908 16A (HC) +phoenix_contact connector MSTBA_01x06_G_5.08mm +0 +6 +6 +Connector_Phoenix_MSTB +PhoenixContact_MSTBA_2,5_6-G_1x06_P5.00mm_Horizontal +Generic Phoenix Contact connector footprint for: MSTBA_2,5/6-G; number of pins: 06; pin pitch: 5.00mm; Angled || order number: 1757514 12A || order number: 1923791 16A (HC) +phoenix_contact connector MSTBA_01x06_G_5.00mm +0 +6 +6 +Connector_Phoenix_MSTB +PhoenixContact_MSTBA_2,5_7-G-5,08_1x07_P5.08mm_Horizontal +Generic Phoenix Contact connector footprint for: MSTBA_2,5/7-G-5,08; number of pins: 07; pin pitch: 5.08mm; Angled || order number: 1757297 12A || order number: 1923911 16A (HC) +phoenix_contact connector MSTBA_01x07_G_5.08mm +0 +7 +7 +Connector_Phoenix_MSTB +PhoenixContact_MSTBA_2,5_7-G_1x07_P5.00mm_Horizontal +Generic Phoenix Contact connector footprint for: MSTBA_2,5/7-G; number of pins: 07; pin pitch: 5.00mm; Angled || order number: 1757493 12A || order number: 1923801 16A (HC) +phoenix_contact connector MSTBA_01x07_G_5.00mm +0 +7 +7 +Connector_Phoenix_MSTB +PhoenixContact_MSTBA_2,5_8-G-5,08_1x08_P5.08mm_Horizontal +Generic Phoenix Contact connector footprint for: MSTBA_2,5/8-G-5,08; number of pins: 08; pin pitch: 5.08mm; Angled || order number: 1757307 12A || order number: 1923924 16A (HC) +phoenix_contact connector MSTBA_01x08_G_5.08mm +0 +8 +8 +Connector_Phoenix_MSTB +PhoenixContact_MSTBA_2,5_8-G_1x08_P5.00mm_Horizontal +Generic Phoenix Contact connector footprint for: MSTBA_2,5/8-G; number of pins: 08; pin pitch: 5.00mm; Angled || order number: 1757527 12A || order number: 1923814 16A (HC) +phoenix_contact connector MSTBA_01x08_G_5.00mm +0 +8 +8 +Connector_Phoenix_MSTB +PhoenixContact_MSTBA_2,5_9-G-5,08_1x09_P5.08mm_Horizontal +Generic Phoenix Contact connector footprint for: MSTBA_2,5/9-G-5,08; number of pins: 09; pin pitch: 5.08mm; Angled || order number: 1757310 12A || order number: 1923937 16A (HC) +phoenix_contact connector MSTBA_01x09_G_5.08mm +0 +9 +9 +Connector_Phoenix_MSTB +PhoenixContact_MSTBA_2,5_9-G_1x09_P5.00mm_Horizontal +Generic Phoenix Contact connector footprint for: MSTBA_2,5/9-G; number of pins: 09; pin pitch: 5.00mm; Angled || order number: 1757530 12A || order number: 1923827 16A (HC) +phoenix_contact connector MSTBA_01x09_G_5.00mm +0 +9 +9 +Connector_Phoenix_MSTB +PhoenixContact_MSTBA_2,5_10-G-5,08_1x10_P5.08mm_Horizontal +Generic Phoenix Contact connector footprint for: MSTBA_2,5/10-G-5,08; number of pins: 10; pin pitch: 5.08mm; Angled || order number: 1757323 12A || order number: 1923940 16A (HC) +phoenix_contact connector MSTBA_01x10_G_5.08mm +0 +10 +10 +Connector_Phoenix_MSTB +PhoenixContact_MSTBA_2,5_10-G_1x10_P5.00mm_Horizontal +Generic Phoenix Contact connector footprint for: MSTBA_2,5/10-G; number of pins: 10; pin pitch: 5.00mm; Angled || order number: 1757543 12A || order number: 1923830 16A (HC) +phoenix_contact connector MSTBA_01x10_G_5.00mm +0 +10 +10 +Connector_Phoenix_MSTB +PhoenixContact_MSTBA_2,5_11-G-5,08_1x11_P5.08mm_Horizontal +Generic Phoenix Contact connector footprint for: MSTBA_2,5/11-G-5,08; number of pins: 11; pin pitch: 5.08mm; Angled || order number: 1757336 12A || order number: 1923953 16A (HC) +phoenix_contact connector MSTBA_01x11_G_5.08mm +0 +11 +11 +Connector_Phoenix_MSTB +PhoenixContact_MSTBA_2,5_11-G_1x11_P5.00mm_Horizontal +Generic Phoenix Contact connector footprint for: MSTBA_2,5/11-G; number of pins: 11; pin pitch: 5.00mm; Angled || order number: 1757556 12A || order number: 1923843 16A (HC) +phoenix_contact connector MSTBA_01x11_G_5.00mm +0 +11 +11 +Connector_Phoenix_MSTB +PhoenixContact_MSTBA_2,5_12-G-5,08_1x12_P5.08mm_Horizontal +Generic Phoenix Contact connector footprint for: MSTBA_2,5/12-G-5,08; number of pins: 12; pin pitch: 5.08mm; Angled || order number: 1757349 12A || order number: 1923966 16A (HC) +phoenix_contact connector MSTBA_01x12_G_5.08mm +0 +12 +12 +Connector_Phoenix_MSTB +PhoenixContact_MSTBA_2,5_12-G_1x12_P5.00mm_Horizontal +Generic Phoenix Contact connector footprint for: MSTBA_2,5/12-G; number of pins: 12; pin pitch: 5.00mm; Angled || order number: 1757569 12A || order number: 1923856 16A (HC) +phoenix_contact connector MSTBA_01x12_G_5.00mm +0 +12 +12 +Connector_Phoenix_MSTB +PhoenixContact_MSTBA_2,5_13-G-5,08_1x13_P5.08mm_Horizontal +Generic Phoenix Contact connector footprint for: MSTBA_2,5/13-G-5,08; number of pins: 13; pin pitch: 5.08mm; Angled || order number: 1757352 12A +phoenix_contact connector MSTBA_01x13_G_5.08mm +0 +13 +13 +Connector_Phoenix_MSTB +PhoenixContact_MSTBA_2,5_13-G_1x13_P5.00mm_Horizontal +Generic Phoenix Contact connector footprint for: MSTBA_2,5/13-G; number of pins: 13; pin pitch: 5.00mm; Angled || order number: 1757572 12A +phoenix_contact connector MSTBA_01x13_G_5.00mm +0 +13 +13 +Connector_Phoenix_MSTB +PhoenixContact_MSTBA_2,5_14-G-5,08_1x14_P5.08mm_Horizontal +Generic Phoenix Contact connector footprint for: MSTBA_2,5/14-G-5,08; number of pins: 14; pin pitch: 5.08mm; Angled || order number: 1757365 12A +phoenix_contact connector MSTBA_01x14_G_5.08mm +0 +14 +14 +Connector_Phoenix_MSTB +PhoenixContact_MSTBA_2,5_14-G_1x14_P5.00mm_Horizontal +Generic Phoenix Contact connector footprint for: MSTBA_2,5/14-G; number of pins: 14; pin pitch: 5.00mm; Angled || order number: 1757585 12A +phoenix_contact connector MSTBA_01x14_G_5.00mm +0 +14 +14 +Connector_Phoenix_MSTB +PhoenixContact_MSTBA_2,5_15-G-5,08_1x15_P5.08mm_Horizontal +Generic Phoenix Contact connector footprint for: MSTBA_2,5/15-G-5,08; number of pins: 15; pin pitch: 5.08mm; Angled || order number: 1757378 12A +phoenix_contact connector MSTBA_01x15_G_5.08mm +0 +15 +15 +Connector_Phoenix_MSTB +PhoenixContact_MSTBA_2,5_15-G_1x15_P5.00mm_Horizontal +Generic Phoenix Contact connector footprint for: MSTBA_2,5/15-G; number of pins: 15; pin pitch: 5.00mm; Angled || order number: 1757598 12A +phoenix_contact connector MSTBA_01x15_G_5.00mm +0 +15 +15 +Connector_Phoenix_MSTB +PhoenixContact_MSTBA_2,5_16-G-5,08_1x16_P5.08mm_Horizontal +Generic Phoenix Contact connector footprint for: MSTBA_2,5/16-G-5,08; number of pins: 16; pin pitch: 5.08mm; Angled || order number: 1757381 12A +phoenix_contact connector MSTBA_01x16_G_5.08mm +0 +16 +16 +Connector_Phoenix_MSTB +PhoenixContact_MSTBA_2,5_16-G_1x16_P5.00mm_Horizontal +Generic Phoenix Contact connector footprint for: MSTBA_2,5/16-G; number of pins: 16; pin pitch: 5.00mm; Angled || order number: 1757608 12A +phoenix_contact connector MSTBA_01x16_G_5.00mm +0 +16 +16 +Connector_Phoenix_MSTB +PhoenixContact_MSTBVA_2,5_2-G-5,08_1x02_P5.08mm_Vertical +Generic Phoenix Contact connector footprint for: MSTBVA_2,5/2-G-5,08; number of pins: 02; pin pitch: 5.08mm; Vertical || order number: 1755736 12A || order number: 1924305 16A (HC) +phoenix_contact connector MSTBVA_01x02_G_5.08mm +0 +2 +2 +Connector_Phoenix_MSTB +PhoenixContact_MSTBVA_2,5_2-G_1x02_P5.00mm_Vertical +Generic Phoenix Contact connector footprint for: MSTBVA_2,5/2-G; number of pins: 02; pin pitch: 5.00mm; Vertical || order number: 1755516 12A || order number: 1924198 16A (HC) +phoenix_contact connector MSTBVA_01x02_G_5.00mm +0 +2 +2 +Connector_Phoenix_MSTB +PhoenixContact_MSTBVA_2,5_3-G-5,08_1x03_P5.08mm_Vertical +Generic Phoenix Contact connector footprint for: MSTBVA_2,5/3-G-5,08; number of pins: 03; pin pitch: 5.08mm; Vertical || order number: 1755749 12A || order number: 1924318 16A (HC) +phoenix_contact connector MSTBVA_01x03_G_5.08mm +0 +3 +3 +Connector_Phoenix_MSTB +PhoenixContact_MSTBVA_2,5_3-G_1x03_P5.00mm_Vertical +Generic Phoenix Contact connector footprint for: MSTBVA_2,5/3-G; number of pins: 03; pin pitch: 5.00mm; Vertical || order number: 1755529 12A || order number: 1924208 16A (HC) +phoenix_contact connector MSTBVA_01x03_G_5.00mm +0 +3 +3 +Connector_Phoenix_MSTB +PhoenixContact_MSTBVA_2,5_4-G-5,08_1x04_P5.08mm_Vertical +Generic Phoenix Contact connector footprint for: MSTBVA_2,5/4-G-5,08; number of pins: 04; pin pitch: 5.08mm; Vertical || order number: 1755752 12A || order number: 1924321 16A (HC) +phoenix_contact connector MSTBVA_01x04_G_5.08mm +0 +4 +4 +Connector_Phoenix_MSTB +PhoenixContact_MSTBVA_2,5_4-G_1x04_P5.00mm_Vertical +Generic Phoenix Contact connector footprint for: MSTBVA_2,5/4-G; number of pins: 04; pin pitch: 5.00mm; Vertical || order number: 1755532 12A || order number: 1924211 16A (HC) +phoenix_contact connector MSTBVA_01x04_G_5.00mm +0 +4 +4 +Connector_Phoenix_MSTB +PhoenixContact_MSTBVA_2,5_5-G-5,08_1x05_P5.08mm_Vertical +Generic Phoenix Contact connector footprint for: MSTBVA_2,5/5-G-5,08; number of pins: 05; pin pitch: 5.08mm; Vertical || order number: 1755765 12A || order number: 1924334 16A (HC) +phoenix_contact connector MSTBVA_01x05_G_5.08mm +0 +5 +5 +Connector_Phoenix_MSTB +PhoenixContact_MSTBVA_2,5_5-G_1x05_P5.00mm_Vertical +Generic Phoenix Contact connector footprint for: MSTBVA_2,5/5-G; number of pins: 05; pin pitch: 5.00mm; Vertical || order number: 1755545 12A || order number: 1924224 16A (HC) +phoenix_contact connector MSTBVA_01x05_G_5.00mm +0 +5 +5 +Connector_Phoenix_MSTB +PhoenixContact_MSTBVA_2,5_6-G-5,08_1x06_P5.08mm_Vertical +Generic Phoenix Contact connector footprint for: MSTBVA_2,5/6-G-5,08; number of pins: 06; pin pitch: 5.08mm; Vertical || order number: 1755778 12A || order number: 1924347 16A (HC) +phoenix_contact connector MSTBVA_01x06_G_5.08mm +0 +6 +6 +Connector_Phoenix_MSTB +PhoenixContact_MSTBVA_2,5_6-G_1x06_P5.00mm_Vertical +Generic Phoenix Contact connector footprint for: MSTBVA_2,5/6-G; number of pins: 06; pin pitch: 5.00mm; Vertical || order number: 1755558 12A || order number: 1924237 16A (HC) +phoenix_contact connector MSTBVA_01x06_G_5.00mm +0 +6 +6 +Connector_Phoenix_MSTB +PhoenixContact_MSTBVA_2,5_7-G-5,08_1x07_P5.08mm_Vertical +Generic Phoenix Contact connector footprint for: MSTBVA_2,5/7-G-5,08; number of pins: 07; pin pitch: 5.08mm; Vertical || order number: 1755781 12A || order number: 1924350 16A (HC) +phoenix_contact connector MSTBVA_01x07_G_5.08mm +0 +7 +7 +Connector_Phoenix_MSTB +PhoenixContact_MSTBVA_2,5_7-G_1x07_P5.00mm_Vertical +Generic Phoenix Contact connector footprint for: MSTBVA_2,5/7-G; number of pins: 07; pin pitch: 5.00mm; Vertical || order number: 1755561 12A || order number: 1924240 16A (HC) +phoenix_contact connector MSTBVA_01x07_G_5.00mm +0 +7 +7 +Connector_Phoenix_MSTB +PhoenixContact_MSTBVA_2,5_8-G-5,08_1x08_P5.08mm_Vertical +Generic Phoenix Contact connector footprint for: MSTBVA_2,5/8-G-5,08; number of pins: 08; pin pitch: 5.08mm; Vertical || order number: 1755794 12A || order number: 1924363 16A (HC) +phoenix_contact connector MSTBVA_01x08_G_5.08mm +0 +8 +8 +Connector_Phoenix_MSTB +PhoenixContact_MSTBVA_2,5_8-G_1x08_P5.00mm_Vertical +Generic Phoenix Contact connector footprint for: MSTBVA_2,5/8-G; number of pins: 08; pin pitch: 5.00mm; Vertical || order number: 1755574 12A || order number: 1924253 16A (HC) +phoenix_contact connector MSTBVA_01x08_G_5.00mm +0 +8 +8 +Connector_Phoenix_MSTB +PhoenixContact_MSTBVA_2,5_9-G-5,08_1x09_P5.08mm_Vertical +Generic Phoenix Contact connector footprint for: MSTBVA_2,5/9-G-5,08; number of pins: 09; pin pitch: 5.08mm; Vertical || order number: 1755804 12A || order number: 1924376 16A (HC) +phoenix_contact connector MSTBVA_01x09_G_5.08mm +0 +9 +9 +Connector_Phoenix_MSTB +PhoenixContact_MSTBVA_2,5_9-G_1x09_P5.00mm_Vertical +Generic Phoenix Contact connector footprint for: MSTBVA_2,5/9-G; number of pins: 09; pin pitch: 5.00mm; Vertical || order number: 1755587 12A || order number: 1924266 16A (HC) +phoenix_contact connector MSTBVA_01x09_G_5.00mm +0 +9 +9 +Connector_Phoenix_MSTB +PhoenixContact_MSTBVA_2,5_10-G-5,08_1x10_P5.08mm_Vertical +Generic Phoenix Contact connector footprint for: MSTBVA_2,5/10-G-5,08; number of pins: 10; pin pitch: 5.08mm; Vertical || order number: 1755817 12A || order number: 1924389 16A (HC) +phoenix_contact connector MSTBVA_01x10_G_5.08mm +0 +10 +10 +Connector_Phoenix_MSTB +PhoenixContact_MSTBVA_2,5_10-G_1x10_P5.00mm_Vertical +Generic Phoenix Contact connector footprint for: MSTBVA_2,5/10-G; number of pins: 10; pin pitch: 5.00mm; Vertical || order number: 1755503 12A || order number: 1924279 16A (HC) +phoenix_contact connector MSTBVA_01x10_G_5.00mm +0 +10 +10 +Connector_Phoenix_MSTB +PhoenixContact_MSTBVA_2,5_11-G-5,08_1x11_P5.08mm_Vertical +Generic Phoenix Contact connector footprint for: MSTBVA_2,5/11-G-5,08; number of pins: 11; pin pitch: 5.08mm; Vertical || order number: 1755820 12A || order number: 1924392 16A (HC) +phoenix_contact connector MSTBVA_01x11_G_5.08mm +0 +11 +11 +Connector_Phoenix_MSTB +PhoenixContact_MSTBVA_2,5_11-G_1x11_P5.00mm_Vertical +Generic Phoenix Contact connector footprint for: MSTBVA_2,5/11-G; number of pins: 11; pin pitch: 5.00mm; Vertical || order number: 1755590 12A || order number: 1924282 16A (HC) +phoenix_contact connector MSTBVA_01x11_G_5.00mm +0 +11 +11 +Connector_Phoenix_MSTB +PhoenixContact_MSTBVA_2,5_12-G-5,08_1x12_P5.08mm_Vertical +Generic Phoenix Contact connector footprint for: MSTBVA_2,5/12-G-5,08; number of pins: 12; pin pitch: 5.08mm; Vertical || order number: 1755833 12A || order number: 1924402 16A (HC) +phoenix_contact connector MSTBVA_01x12_G_5.08mm +0 +12 +12 +Connector_Phoenix_MSTB +PhoenixContact_MSTBVA_2,5_12-G_1x12_P5.00mm_Vertical +Generic Phoenix Contact connector footprint for: MSTBVA_2,5/12-G; number of pins: 12; pin pitch: 5.00mm; Vertical || order number: 1755600 12A || order number: 1924295 16A (HC) +phoenix_contact connector MSTBVA_01x12_G_5.00mm +0 +12 +12 +Connector_Phoenix_MSTB +PhoenixContact_MSTBVA_2,5_13-G-5,08_1x13_P5.08mm_Vertical +Generic Phoenix Contact connector footprint for: MSTBVA_2,5/13-G-5,08; number of pins: 13; pin pitch: 5.08mm; Vertical || order number: 1755846 12A +phoenix_contact connector MSTBVA_01x13_G_5.08mm +0 +13 +13 +Connector_Phoenix_MSTB +PhoenixContact_MSTBVA_2,5_13-G_1x13_P5.00mm_Vertical +Generic Phoenix Contact connector footprint for: MSTBVA_2,5/13-G; number of pins: 13; pin pitch: 5.00mm; Vertical || order number: 1755613 12A +phoenix_contact connector MSTBVA_01x13_G_5.00mm +0 +13 +13 +Connector_Phoenix_MSTB +PhoenixContact_MSTBVA_2,5_14-G-5,08_1x14_P5.08mm_Vertical +Generic Phoenix Contact connector footprint for: MSTBVA_2,5/14-G-5,08; number of pins: 14; pin pitch: 5.08mm; Vertical || order number: 1755859 12A +phoenix_contact connector MSTBVA_01x14_G_5.08mm +0 +14 +14 +Connector_Phoenix_MSTB +PhoenixContact_MSTBVA_2,5_14-G_1x14_P5.00mm_Vertical +Generic Phoenix Contact connector footprint for: MSTBVA_2,5/14-G; number of pins: 14; pin pitch: 5.00mm; Vertical || order number: 1755626 12A +phoenix_contact connector MSTBVA_01x14_G_5.00mm +0 +14 +14 +Connector_Phoenix_MSTB +PhoenixContact_MSTBVA_2,5_15-G-5,08_1x15_P5.08mm_Vertical +Generic Phoenix Contact connector footprint for: MSTBVA_2,5/15-G-5,08; number of pins: 15; pin pitch: 5.08mm; Vertical || order number: 1755862 12A +phoenix_contact connector MSTBVA_01x15_G_5.08mm +0 +15 +15 +Connector_Phoenix_MSTB +PhoenixContact_MSTBVA_2,5_15-G_1x15_P5.00mm_Vertical +Generic Phoenix Contact connector footprint for: MSTBVA_2,5/15-G; number of pins: 15; pin pitch: 5.00mm; Vertical || order number: 1755639 12A +phoenix_contact connector MSTBVA_01x15_G_5.00mm +0 +15 +15 +Connector_Phoenix_MSTB +PhoenixContact_MSTBVA_2,5_16-G-5,08_1x16_P5.08mm_Vertical +Generic Phoenix Contact connector footprint for: MSTBVA_2,5/16-G-5,08; number of pins: 16; pin pitch: 5.08mm; Vertical || order number: 1755875 12A +phoenix_contact connector MSTBVA_01x16_G_5.08mm +0 +16 +16 +Connector_Phoenix_MSTB +PhoenixContact_MSTBVA_2,5_16-G_1x16_P5.00mm_Vertical +Generic Phoenix Contact connector footprint for: MSTBVA_2,5/16-G; number of pins: 16; pin pitch: 5.00mm; Vertical || order number: 1755642 12A +phoenix_contact connector MSTBVA_01x16_G_5.00mm +0 +16 +16 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_2-GF-5,08_1x02_P5.08mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTBV_2,5/2-GF-5,08; number of pins: 02; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1777073 12A || order number: 1924525 16A (HC) +phoenix_contact connector MSTBV_01x02_GF_5.08mm +0 +2 +2 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_2-GF-5,08_1x02_P5.08mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTBV_2,5/2-GF-5,08; number of pins: 02; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1777073 12A || order number: 1924525 16A (HC) +phoenix_contact connector MSTBV_01x02_GF_5.08mm_MH +0 +2 +2 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_2-GF_1x02_P5.00mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTBV_2,5/2-GF; number of pins: 02; pin pitch: 5.00mm; Vertical; threaded flange || order number: 1776883 12A || order number: 1924415 16A (HC) +phoenix_contact connector MSTBV_01x02_GF_5.00mm +0 +2 +2 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_2-GF_1x02_P5.00mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTBV_2,5/2-GF; number of pins: 02; pin pitch: 5.00mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776883 12A || order number: 1924415 16A (HC) +phoenix_contact connector MSTBV_01x02_GF_5.00mm_MH +0 +2 +2 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_3-GF-5,08_1x03_P5.08mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTBV_2,5/3-GF-5,08; number of pins: 03; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1777086 12A || order number: 1924538 16A (HC) +phoenix_contact connector MSTBV_01x03_GF_5.08mm +0 +3 +3 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_3-GF-5,08_1x03_P5.08mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTBV_2,5/3-GF-5,08; number of pins: 03; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1777086 12A || order number: 1924538 16A (HC) +phoenix_contact connector MSTBV_01x03_GF_5.08mm_MH +0 +3 +3 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_3-GF_1x03_P5.00mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTBV_2,5/3-GF; number of pins: 03; pin pitch: 5.00mm; Vertical; threaded flange || order number: 1776896 12A || order number: 1924428 16A (HC) +phoenix_contact connector MSTBV_01x03_GF_5.00mm +0 +3 +3 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_3-GF_1x03_P5.00mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTBV_2,5/3-GF; number of pins: 03; pin pitch: 5.00mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776896 12A || order number: 1924428 16A (HC) +phoenix_contact connector MSTBV_01x03_GF_5.00mm_MH +0 +3 +3 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_4-GF-5,08_1x04_P5.08mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTBV_2,5/4-GF-5,08; number of pins: 04; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1777099 12A || order number: 1924541 16A (HC) +phoenix_contact connector MSTBV_01x04_GF_5.08mm +0 +4 +4 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_4-GF-5,08_1x04_P5.08mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTBV_2,5/4-GF-5,08; number of pins: 04; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1777099 12A || order number: 1924541 16A (HC) +phoenix_contact connector MSTBV_01x04_GF_5.08mm_MH +0 +4 +4 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_4-GF_1x04_P5.00mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTBV_2,5/4-GF; number of pins: 04; pin pitch: 5.00mm; Vertical; threaded flange || order number: 1776906 12A || order number: 1924431 16A (HC) +phoenix_contact connector MSTBV_01x04_GF_5.00mm +0 +4 +4 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_4-GF_1x04_P5.00mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTBV_2,5/4-GF; number of pins: 04; pin pitch: 5.00mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776906 12A || order number: 1924431 16A (HC) +phoenix_contact connector MSTBV_01x04_GF_5.00mm_MH +0 +4 +4 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_5-GF-5,08_1x05_P5.08mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTBV_2,5/5-GF-5,08; number of pins: 05; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1777109 12A || order number: 1924554 16A (HC) +phoenix_contact connector MSTBV_01x05_GF_5.08mm +0 +5 +5 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_5-GF-5,08_1x05_P5.08mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTBV_2,5/5-GF-5,08; number of pins: 05; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1777109 12A || order number: 1924554 16A (HC) +phoenix_contact connector MSTBV_01x05_GF_5.08mm_MH +0 +5 +5 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_5-GF_1x05_P5.00mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTBV_2,5/5-GF; number of pins: 05; pin pitch: 5.00mm; Vertical; threaded flange || order number: 1776919 12A || order number: 1924444 16A (HC) +phoenix_contact connector MSTBV_01x05_GF_5.00mm +0 +5 +5 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_5-GF_1x05_P5.00mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTBV_2,5/5-GF; number of pins: 05; pin pitch: 5.00mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776919 12A || order number: 1924444 16A (HC) +phoenix_contact connector MSTBV_01x05_GF_5.00mm_MH +0 +5 +5 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_6-GF-5,08_1x06_P5.08mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTBV_2,5/6-GF-5,08; number of pins: 06; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1777112 12A || order number: 1924567 16A (HC) +phoenix_contact connector MSTBV_01x06_GF_5.08mm +0 +6 +6 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_6-GF-5,08_1x06_P5.08mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTBV_2,5/6-GF-5,08; number of pins: 06; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1777112 12A || order number: 1924567 16A (HC) +phoenix_contact connector MSTBV_01x06_GF_5.08mm_MH +0 +6 +6 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_6-GF_1x06_P5.00mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTBV_2,5/6-GF; number of pins: 06; pin pitch: 5.00mm; Vertical; threaded flange || order number: 1776922 12A || order number: 1924457 16A (HC) +phoenix_contact connector MSTBV_01x06_GF_5.00mm +0 +6 +6 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_6-GF_1x06_P5.00mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTBV_2,5/6-GF; number of pins: 06; pin pitch: 5.00mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776922 12A || order number: 1924457 16A (HC) +phoenix_contact connector MSTBV_01x06_GF_5.00mm_MH +0 +6 +6 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_7-GF-5,08_1x07_P5.08mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTBV_2,5/7-GF-5,08; number of pins: 07; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1777125 12A || order number: 1924570 16A (HC) +phoenix_contact connector MSTBV_01x07_GF_5.08mm +0 +7 +7 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_7-GF-5,08_1x07_P5.08mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTBV_2,5/7-GF-5,08; number of pins: 07; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1777125 12A || order number: 1924570 16A (HC) +phoenix_contact connector MSTBV_01x07_GF_5.08mm_MH +0 +7 +7 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_7-GF_1x07_P5.00mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTBV_2,5/7-GF; number of pins: 07; pin pitch: 5.00mm; Vertical; threaded flange || order number: 1776935 12A || order number: 1924460 16A (HC) +phoenix_contact connector MSTBV_01x07_GF_5.00mm +0 +7 +7 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_7-GF_1x07_P5.00mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTBV_2,5/7-GF; number of pins: 07; pin pitch: 5.00mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776935 12A || order number: 1924460 16A (HC) +phoenix_contact connector MSTBV_01x07_GF_5.00mm_MH +0 +7 +7 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_8-GF-5,08_1x08_P5.08mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTBV_2,5/8-GF-5,08; number of pins: 08; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1777138 12A || order number: 1924583 16A (HC) +phoenix_contact connector MSTBV_01x08_GF_5.08mm +0 +8 +8 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_8-GF-5,08_1x08_P5.08mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTBV_2,5/8-GF-5,08; number of pins: 08; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1777138 12A || order number: 1924583 16A (HC) +phoenix_contact connector MSTBV_01x08_GF_5.08mm_MH +0 +8 +8 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_8-GF_1x08_P5.00mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTBV_2,5/8-GF; number of pins: 08; pin pitch: 5.00mm; Vertical; threaded flange || order number: 1776948 12A || order number: 1924473 16A (HC) +phoenix_contact connector MSTBV_01x08_GF_5.00mm +0 +8 +8 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_8-GF_1x08_P5.00mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTBV_2,5/8-GF; number of pins: 08; pin pitch: 5.00mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776948 12A || order number: 1924473 16A (HC) +phoenix_contact connector MSTBV_01x08_GF_5.00mm_MH +0 +8 +8 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_9-GF-5,08_1x09_P5.08mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTBV_2,5/9-GF-5,08; number of pins: 09; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1777141 12A || order number: 1924596 16A (HC) +phoenix_contact connector MSTBV_01x09_GF_5.08mm +0 +9 +9 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_9-GF-5,08_1x09_P5.08mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTBV_2,5/9-GF-5,08; number of pins: 09; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1777141 12A || order number: 1924596 16A (HC) +phoenix_contact connector MSTBV_01x09_GF_5.08mm_MH +0 +9 +9 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_9-GF_1x09_P5.00mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTBV_2,5/9-GF; number of pins: 09; pin pitch: 5.00mm; Vertical; threaded flange || order number: 1776951 12A || order number: 1924486 16A (HC) +phoenix_contact connector MSTBV_01x09_GF_5.00mm +0 +9 +9 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_9-GF_1x09_P5.00mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTBV_2,5/9-GF; number of pins: 09; pin pitch: 5.00mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776951 12A || order number: 1924486 16A (HC) +phoenix_contact connector MSTBV_01x09_GF_5.00mm_MH +0 +9 +9 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_10-GF-5,08_1x10_P5.08mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTBV_2,5/10-GF-5,08; number of pins: 10; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1777154 12A || order number: 1924606 16A (HC) +phoenix_contact connector MSTBV_01x10_GF_5.08mm +0 +10 +10 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_10-GF-5,08_1x10_P5.08mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTBV_2,5/10-GF-5,08; number of pins: 10; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1777154 12A || order number: 1924606 16A (HC) +phoenix_contact connector MSTBV_01x10_GF_5.08mm_MH +0 +10 +10 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_10-GF_1x10_P5.00mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTBV_2,5/10-GF; number of pins: 10; pin pitch: 5.00mm; Vertical; threaded flange || order number: 1776964 12A || order number: 1924499 16A (HC) +phoenix_contact connector MSTBV_01x10_GF_5.00mm +0 +10 +10 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_10-GF_1x10_P5.00mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTBV_2,5/10-GF; number of pins: 10; pin pitch: 5.00mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776964 12A || order number: 1924499 16A (HC) +phoenix_contact connector MSTBV_01x10_GF_5.00mm_MH +0 +10 +10 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_11-GF-5,08_1x11_P5.08mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTBV_2,5/11-GF-5,08; number of pins: 11; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1777167 12A || order number: 1924619 16A (HC) +phoenix_contact connector MSTBV_01x11_GF_5.08mm +0 +11 +11 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_11-GF-5,08_1x11_P5.08mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTBV_2,5/11-GF-5,08; number of pins: 11; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1777167 12A || order number: 1924619 16A (HC) +phoenix_contact connector MSTBV_01x11_GF_5.08mm_MH +0 +11 +11 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_11-GF_1x11_P5.00mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTBV_2,5/11-GF; number of pins: 11; pin pitch: 5.00mm; Vertical; threaded flange || order number: 1776977 12A || order number: 1924509 16A (HC) +phoenix_contact connector MSTBV_01x11_GF_5.00mm +0 +11 +11 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_11-GF_1x11_P5.00mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTBV_2,5/11-GF; number of pins: 11; pin pitch: 5.00mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776977 12A || order number: 1924509 16A (HC) +phoenix_contact connector MSTBV_01x11_GF_5.00mm_MH +0 +11 +11 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_12-GF-5,08_1x12_P5.08mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTBV_2,5/12-GF-5,08; number of pins: 12; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1777170 12A || order number: 1924622 16A (HC) +phoenix_contact connector MSTBV_01x12_GF_5.08mm +0 +12 +12 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_12-GF-5,08_1x12_P5.08mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTBV_2,5/12-GF-5,08; number of pins: 12; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1777170 12A || order number: 1924622 16A (HC) +phoenix_contact connector MSTBV_01x12_GF_5.08mm_MH +0 +12 +12 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_12-GF_1x12_P5.00mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTBV_2,5/12-GF; number of pins: 12; pin pitch: 5.00mm; Vertical; threaded flange || order number: 1776980 12A || order number: 1924512 16A (HC) +phoenix_contact connector MSTBV_01x12_GF_5.00mm +0 +12 +12 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_12-GF_1x12_P5.00mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTBV_2,5/12-GF; number of pins: 12; pin pitch: 5.00mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776980 12A || order number: 1924512 16A (HC) +phoenix_contact connector MSTBV_01x12_GF_5.00mm_MH +0 +12 +12 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_13-GF-5,08_1x13_P5.08mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTBV_2,5/13-GF-5,08; number of pins: 13; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1777183 12A +phoenix_contact connector MSTBV_01x13_GF_5.08mm +0 +13 +13 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_13-GF-5,08_1x13_P5.08mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTBV_2,5/13-GF-5,08; number of pins: 13; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1777183 12A +phoenix_contact connector MSTBV_01x13_GF_5.08mm_MH +0 +13 +13 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_13-GF_1x13_P5.00mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTBV_2,5/13-GF; number of pins: 13; pin pitch: 5.00mm; Vertical; threaded flange || order number: 1776993 12A +phoenix_contact connector MSTBV_01x13_GF_5.00mm +0 +13 +13 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_13-GF_1x13_P5.00mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTBV_2,5/13-GF; number of pins: 13; pin pitch: 5.00mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776993 12A +phoenix_contact connector MSTBV_01x13_GF_5.00mm_MH +0 +13 +13 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_14-GF-5,08_1x14_P5.08mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTBV_2,5/14-GF-5,08; number of pins: 14; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1777196 12A +phoenix_contact connector MSTBV_01x14_GF_5.08mm +0 +14 +14 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_14-GF-5,08_1x14_P5.08mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTBV_2,5/14-GF-5,08; number of pins: 14; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1777196 12A +phoenix_contact connector MSTBV_01x14_GF_5.08mm_MH +0 +14 +14 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_14-GF_1x14_P5.00mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTBV_2,5/14-GF; number of pins: 14; pin pitch: 5.00mm; Vertical; threaded flange || order number: 1776002 12A +phoenix_contact connector MSTBV_01x14_GF_5.00mm +0 +14 +14 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_14-GF_1x14_P5.00mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTBV_2,5/14-GF; number of pins: 14; pin pitch: 5.00mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776002 12A +phoenix_contact connector MSTBV_01x14_GF_5.00mm_MH +0 +14 +14 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_15-GF-5,08_1x15_P5.08mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTBV_2,5/15-GF-5,08; number of pins: 15; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1777206 12A +phoenix_contact connector MSTBV_01x15_GF_5.08mm +0 +15 +15 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_15-GF-5,08_1x15_P5.08mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTBV_2,5/15-GF-5,08; number of pins: 15; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1777206 12A +phoenix_contact connector MSTBV_01x15_GF_5.08mm_MH +0 +15 +15 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_15-GF_1x15_P5.00mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTBV_2,5/15-GF; number of pins: 15; pin pitch: 5.00mm; Vertical; threaded flange || order number: 1776015 12A +phoenix_contact connector MSTBV_01x15_GF_5.00mm +0 +15 +15 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_15-GF_1x15_P5.00mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTBV_2,5/15-GF; number of pins: 15; pin pitch: 5.00mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776015 12A +phoenix_contact connector MSTBV_01x15_GF_5.00mm_MH +0 +15 +15 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_16-GF-5,08_1x16_P5.08mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTBV_2,5/16-GF-5,08; number of pins: 16; pin pitch: 5.08mm; Vertical; threaded flange || order number: 1777219 12A +phoenix_contact connector MSTBV_01x16_GF_5.08mm +0 +16 +16 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_16-GF-5,08_1x16_P5.08mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTBV_2,5/16-GF-5,08; number of pins: 16; pin pitch: 5.08mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1777219 12A +phoenix_contact connector MSTBV_01x16_GF_5.08mm_MH +0 +16 +16 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_16-GF_1x16_P5.00mm_Vertical_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTBV_2,5/16-GF; number of pins: 16; pin pitch: 5.00mm; Vertical; threaded flange || order number: 1776028 12A +phoenix_contact connector MSTBV_01x16_GF_5.00mm +0 +16 +16 +Connector_Phoenix_MSTB +PhoenixContact_MSTBV_2,5_16-GF_1x16_P5.00mm_Vertical_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTBV_2,5/16-GF; number of pins: 16; pin pitch: 5.00mm; Vertical; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776028 12A +phoenix_contact connector MSTBV_01x16_GF_5.00mm_MH +0 +16 +16 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_2-GF-5,08_1x02_P5.08mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTB_2,5/2-GF-5,08; number of pins: 02; pin pitch: 5.08mm; Angled; threaded flange || order number: 1776508 12A || order number: 1924088 16A (HC) +phoenix_contact connector MSTB_01x02_GF_5.08mm +0 +2 +2 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_2-GF-5,08_1x02_P5.08mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTB_2,5/2-GF-5,08; number of pins: 02; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776508 12A || order number: 1924088 16A (HC) +phoenix_contact connector MSTB_01x02_GF_5.08mm_MH +0 +2 +2 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_2-GF_1x02_P5.00mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTB_2,5/2-GF; number of pins: 02; pin pitch: 5.00mm; Angled; threaded flange || order number: 1776692 12A || order number: 1923979 16A (HC) +phoenix_contact connector MSTB_01x02_GF_5.00mm +0 +2 +2 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_2-GF_1x02_P5.00mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTB_2,5/2-GF; number of pins: 02; pin pitch: 5.00mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776692 12A || order number: 1923979 16A (HC) +phoenix_contact connector MSTB_01x02_GF_5.00mm_MH +0 +2 +2 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_3-GF-5,08_1x03_P5.08mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTB_2,5/3-GF-5,08; number of pins: 03; pin pitch: 5.08mm; Angled; threaded flange || order number: 1776511 12A || order number: 1924091 16A (HC) +phoenix_contact connector MSTB_01x03_GF_5.08mm +0 +3 +3 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_3-GF-5,08_1x03_P5.08mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTB_2,5/3-GF-5,08; number of pins: 03; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776511 12A || order number: 1924091 16A (HC) +phoenix_contact connector MSTB_01x03_GF_5.08mm_MH +0 +3 +3 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_3-GF_1x03_P5.00mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTB_2,5/3-GF; number of pins: 03; pin pitch: 5.00mm; Angled; threaded flange || order number: 1776702 12A || order number: 1923982 16A (HC) +phoenix_contact connector MSTB_01x03_GF_5.00mm +0 +3 +3 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_3-GF_1x03_P5.00mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTB_2,5/3-GF; number of pins: 03; pin pitch: 5.00mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776702 12A || order number: 1923982 16A (HC) +phoenix_contact connector MSTB_01x03_GF_5.00mm_MH +0 +3 +3 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_4-GF-5,08_1x04_P5.08mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTB_2,5/4-GF-5,08; number of pins: 04; pin pitch: 5.08mm; Angled; threaded flange || order number: 1776524 12A || order number: 1924101 16A (HC) +phoenix_contact connector MSTB_01x04_GF_5.08mm +0 +4 +4 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_4-GF-5,08_1x04_P5.08mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTB_2,5/4-GF-5,08; number of pins: 04; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776524 12A || order number: 1924101 16A (HC) +phoenix_contact connector MSTB_01x04_GF_5.08mm_MH +0 +4 +4 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_4-GF_1x04_P5.00mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTB_2,5/4-GF; number of pins: 04; pin pitch: 5.00mm; Angled; threaded flange || order number: 1776715 12A || order number: 1923995 16A (HC) +phoenix_contact connector MSTB_01x04_GF_5.00mm +0 +4 +4 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_4-GF_1x04_P5.00mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTB_2,5/4-GF; number of pins: 04; pin pitch: 5.00mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776715 12A || order number: 1923995 16A (HC) +phoenix_contact connector MSTB_01x04_GF_5.00mm_MH +0 +4 +4 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_5-GF-5,08_1x05_P5.08mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTB_2,5/5-GF-5,08; number of pins: 05; pin pitch: 5.08mm; Angled; threaded flange || order number: 1776537 12A || order number: 1924114 16A (HC) +phoenix_contact connector MSTB_01x05_GF_5.08mm +0 +5 +5 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_5-GF-5,08_1x05_P5.08mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTB_2,5/5-GF-5,08; number of pins: 05; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776537 12A || order number: 1924114 16A (HC) +phoenix_contact connector MSTB_01x05_GF_5.08mm_MH +0 +5 +5 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_5-GF_1x05_P5.00mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTB_2,5/5-GF; number of pins: 05; pin pitch: 5.00mm; Angled; threaded flange || order number: 1776728 12A || order number: 1924004 16A (HC) +phoenix_contact connector MSTB_01x05_GF_5.00mm +0 +5 +5 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_5-GF_1x05_P5.00mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTB_2,5/5-GF; number of pins: 05; pin pitch: 5.00mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776728 12A || order number: 1924004 16A (HC) +phoenix_contact connector MSTB_01x05_GF_5.00mm_MH +0 +5 +5 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_6-GF-5,08_1x06_P5.08mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTB_2,5/6-GF-5,08; number of pins: 06; pin pitch: 5.08mm; Angled; threaded flange || order number: 1776540 12A || order number: 1924127 16A (HC) +phoenix_contact connector MSTB_01x06_GF_5.08mm +0 +6 +6 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_6-GF-5,08_1x06_P5.08mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTB_2,5/6-GF-5,08; number of pins: 06; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776540 12A || order number: 1924127 16A (HC) +phoenix_contact connector MSTB_01x06_GF_5.08mm_MH +0 +6 +6 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_6-GF_1x06_P5.00mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTB_2,5/6-GF; number of pins: 06; pin pitch: 5.00mm; Angled; threaded flange || order number: 1776731 12A || order number: 1924017 16A (HC) +phoenix_contact connector MSTB_01x06_GF_5.00mm +0 +6 +6 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_6-GF_1x06_P5.00mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTB_2,5/6-GF; number of pins: 06; pin pitch: 5.00mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776731 12A || order number: 1924017 16A (HC) +phoenix_contact connector MSTB_01x06_GF_5.00mm_MH +0 +6 +6 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_7-GF-5,08_1x07_P5.08mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTB_2,5/7-GF-5,08; number of pins: 07; pin pitch: 5.08mm; Angled; threaded flange || order number: 1776553 12A || order number: 1924130 16A (HC) +phoenix_contact connector MSTB_01x07_GF_5.08mm +0 +7 +7 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_7-GF-5,08_1x07_P5.08mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTB_2,5/7-GF-5,08; number of pins: 07; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776553 12A || order number: 1924130 16A (HC) +phoenix_contact connector MSTB_01x07_GF_5.08mm_MH +0 +7 +7 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_7-GF_1x07_P5.00mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTB_2,5/7-GF; number of pins: 07; pin pitch: 5.00mm; Angled; threaded flange || order number: 1776744 12A || order number: 1924020 16A (HC) +phoenix_contact connector MSTB_01x07_GF_5.00mm +0 +7 +7 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_7-GF_1x07_P5.00mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTB_2,5/7-GF; number of pins: 07; pin pitch: 5.00mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776744 12A || order number: 1924020 16A (HC) +phoenix_contact connector MSTB_01x07_GF_5.00mm_MH +0 +7 +7 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_8-GF-5,08_1x08_P5.08mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTB_2,5/8-GF-5,08; number of pins: 08; pin pitch: 5.08mm; Angled; threaded flange || order number: 1776566 12A || order number: 1924143 16A (HC) +phoenix_contact connector MSTB_01x08_GF_5.08mm +0 +8 +8 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_8-GF-5,08_1x08_P5.08mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTB_2,5/8-GF-5,08; number of pins: 08; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776566 12A || order number: 1924143 16A (HC) +phoenix_contact connector MSTB_01x08_GF_5.08mm_MH +0 +8 +8 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_8-GF_1x08_P5.00mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTB_2,5/8-GF; number of pins: 08; pin pitch: 5.00mm; Angled; threaded flange || order number: 1776757 12A || order number: 1924033 16A (HC) +phoenix_contact connector MSTB_01x08_GF_5.00mm +0 +8 +8 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_8-GF_1x08_P5.00mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTB_2,5/8-GF; number of pins: 08; pin pitch: 5.00mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776757 12A || order number: 1924033 16A (HC) +phoenix_contact connector MSTB_01x08_GF_5.00mm_MH +0 +8 +8 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_9-GF-5,08_1x09_P5.08mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTB_2,5/9-GF-5,08; number of pins: 09; pin pitch: 5.08mm; Angled; threaded flange || order number: 1776579 12A || order number: 1924156 16A (HC) +phoenix_contact connector MSTB_01x09_GF_5.08mm +0 +9 +9 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_9-GF-5,08_1x09_P5.08mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTB_2,5/9-GF-5,08; number of pins: 09; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776579 12A || order number: 1924156 16A (HC) +phoenix_contact connector MSTB_01x09_GF_5.08mm_MH +0 +9 +9 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_9-GF_1x09_P5.00mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTB_2,5/9-GF; number of pins: 09; pin pitch: 5.00mm; Angled; threaded flange || order number: 1776760 12A || order number: 1924046 16A (HC) +phoenix_contact connector MSTB_01x09_GF_5.00mm +0 +9 +9 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_9-GF_1x09_P5.00mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTB_2,5/9-GF; number of pins: 09; pin pitch: 5.00mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776760 12A || order number: 1924046 16A (HC) +phoenix_contact connector MSTB_01x09_GF_5.00mm_MH +0 +9 +9 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_10-GF-5,08_1x10_P5.08mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTB_2,5/10-GF-5,08; number of pins: 10; pin pitch: 5.08mm; Angled; threaded flange || order number: 1776582 12A || order number: 1924169 16A (HC) +phoenix_contact connector MSTB_01x10_GF_5.08mm +0 +10 +10 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_10-GF-5,08_1x10_P5.08mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTB_2,5/10-GF-5,08; number of pins: 10; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776582 12A || order number: 1924169 16A (HC) +phoenix_contact connector MSTB_01x10_GF_5.08mm_MH +0 +10 +10 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_10-GF_1x10_P5.00mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTB_2,5/10-GF; number of pins: 10; pin pitch: 5.00mm; Angled; threaded flange || order number: 1776773 12A || order number: 1924059 16A (HC) +phoenix_contact connector MSTB_01x10_GF_5.00mm +0 +10 +10 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_10-GF_1x10_P5.00mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTB_2,5/10-GF; number of pins: 10; pin pitch: 5.00mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776773 12A || order number: 1924059 16A (HC) +phoenix_contact connector MSTB_01x10_GF_5.00mm_MH +0 +10 +10 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_11-GF-5,08_1x11_P5.08mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTB_2,5/11-GF-5,08; number of pins: 11; pin pitch: 5.08mm; Angled; threaded flange || order number: 1776595 12A || order number: 1924172 16A (HC) +phoenix_contact connector MSTB_01x11_GF_5.08mm +0 +11 +11 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_11-GF-5,08_1x11_P5.08mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTB_2,5/11-GF-5,08; number of pins: 11; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776595 12A || order number: 1924172 16A (HC) +phoenix_contact connector MSTB_01x11_GF_5.08mm_MH +0 +11 +11 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_11-GF_1x11_P5.00mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTB_2,5/11-GF; number of pins: 11; pin pitch: 5.00mm; Angled; threaded flange || order number: 1776786 12A || order number: 1924062 16A (HC) +phoenix_contact connector MSTB_01x11_GF_5.00mm +0 +11 +11 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_11-GF_1x11_P5.00mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTB_2,5/11-GF; number of pins: 11; pin pitch: 5.00mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776786 12A || order number: 1924062 16A (HC) +phoenix_contact connector MSTB_01x11_GF_5.00mm_MH +0 +11 +11 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_12-GF-5,08_1x12_P5.08mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTB_2,5/12-GF-5,08; number of pins: 12; pin pitch: 5.08mm; Angled; threaded flange || order number: 1776605 12A || order number: 1924185 16A (HC) +phoenix_contact connector MSTB_01x12_GF_5.08mm +0 +12 +12 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_12-GF-5,08_1x12_P5.08mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTB_2,5/12-GF-5,08; number of pins: 12; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776605 12A || order number: 1924185 16A (HC) +phoenix_contact connector MSTB_01x12_GF_5.08mm_MH +0 +12 +12 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_12-GF_1x12_P5.00mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTB_2,5/12-GF; number of pins: 12; pin pitch: 5.00mm; Angled; threaded flange || order number: 1776799 12A || order number: 1924075 16A (HC) +phoenix_contact connector MSTB_01x12_GF_5.00mm +0 +12 +12 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_12-GF_1x12_P5.00mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTB_2,5/12-GF; number of pins: 12; pin pitch: 5.00mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776799 12A || order number: 1924075 16A (HC) +phoenix_contact connector MSTB_01x12_GF_5.00mm_MH +0 +12 +12 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_13-GF-5,08_1x13_P5.08mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTB_2,5/13-GF-5,08; number of pins: 13; pin pitch: 5.08mm; Angled; threaded flange || order number: 1776618 12A +phoenix_contact connector MSTB_01x13_GF_5.08mm +0 +13 +13 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_13-GF-5,08_1x13_P5.08mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTB_2,5/13-GF-5,08; number of pins: 13; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776618 12A +phoenix_contact connector MSTB_01x13_GF_5.08mm_MH +0 +13 +13 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_13-GF_1x13_P5.00mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTB_2,5/13-GF; number of pins: 13; pin pitch: 5.00mm; Angled; threaded flange || order number: 1776809 12A +phoenix_contact connector MSTB_01x13_GF_5.00mm +0 +13 +13 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_13-GF_1x13_P5.00mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTB_2,5/13-GF; number of pins: 13; pin pitch: 5.00mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776809 12A +phoenix_contact connector MSTB_01x13_GF_5.00mm_MH +0 +13 +13 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_14-GF-5,08_1x14_P5.08mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTB_2,5/14-GF-5,08; number of pins: 14; pin pitch: 5.08mm; Angled; threaded flange || order number: 1776621 12A +phoenix_contact connector MSTB_01x14_GF_5.08mm +0 +14 +14 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_14-GF-5,08_1x14_P5.08mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTB_2,5/14-GF-5,08; number of pins: 14; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776621 12A +phoenix_contact connector MSTB_01x14_GF_5.08mm_MH +0 +14 +14 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_14-GF_1x14_P5.00mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTB_2,5/14-GF; number of pins: 14; pin pitch: 5.00mm; Angled; threaded flange || order number: 1776812 12A +phoenix_contact connector MSTB_01x14_GF_5.00mm +0 +14 +14 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_14-GF_1x14_P5.00mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTB_2,5/14-GF; number of pins: 14; pin pitch: 5.00mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776812 12A +phoenix_contact connector MSTB_01x14_GF_5.00mm_MH +0 +14 +14 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_15-GF-5,08_1x15_P5.08mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTB_2,5/15-GF-5,08; number of pins: 15; pin pitch: 5.08mm; Angled; threaded flange || order number: 1776634 12A +phoenix_contact connector MSTB_01x15_GF_5.08mm +0 +15 +15 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_15-GF-5,08_1x15_P5.08mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTB_2,5/15-GF-5,08; number of pins: 15; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776634 12A +phoenix_contact connector MSTB_01x15_GF_5.08mm_MH +0 +15 +15 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_15-GF_1x15_P5.00mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTB_2,5/15-GF; number of pins: 15; pin pitch: 5.00mm; Angled; threaded flange || order number: 1776825 12A +phoenix_contact connector MSTB_01x15_GF_5.00mm +0 +15 +15 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_15-GF_1x15_P5.00mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTB_2,5/15-GF; number of pins: 15; pin pitch: 5.00mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776825 12A +phoenix_contact connector MSTB_01x15_GF_5.00mm_MH +0 +15 +15 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_16-GF-5,08_1x16_P5.08mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTB_2,5/16-GF-5,08; number of pins: 16; pin pitch: 5.08mm; Angled; threaded flange || order number: 1776647 12A +phoenix_contact connector MSTB_01x16_GF_5.08mm +0 +16 +16 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_16-GF-5,08_1x16_P5.08mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTB_2,5/16-GF-5,08; number of pins: 16; pin pitch: 5.08mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776647 12A +phoenix_contact connector MSTB_01x16_GF_5.08mm_MH +0 +16 +16 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_16-GF_1x16_P5.00mm_Horizontal_ThreadedFlange +Generic Phoenix Contact connector footprint for: MSTB_2,5/16-GF; number of pins: 16; pin pitch: 5.00mm; Angled; threaded flange || order number: 1776838 12A +phoenix_contact connector MSTB_01x16_GF_5.00mm +0 +16 +16 +Connector_Phoenix_MSTB +PhoenixContact_MSTB_2,5_16-GF_1x16_P5.00mm_Horizontal_ThreadedFlange_MountHole +Generic Phoenix Contact connector footprint for: MSTB_2,5/16-GF; number of pins: 16; pin pitch: 5.00mm; Angled; threaded flange; footprint includes mount hole for mounting screw: ISO 1481-ST 2.2x6.5 C or ISO 7049-ST 2.2x6.5 C (http://www.fasteners.eu/standards/ISO/7049/) || order number: 1776838 12A +phoenix_contact connector MSTB_01x16_GF_5.00mm_MH +0 +16 +16 +Connector_Phoenix_SPT +PhoenixContact_SPT_1.5_2-H-3.5_1x02_P3.5mm_Horizontal +Connector Phoenix Contact, SPT 1.5/2-H-3.5 Terminal Block, 1990737 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1990737), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 1.5/2-H-3.5 1990737 +0 +4 +2 +Connector_Phoenix_SPT +PhoenixContact_SPT_1.5_3-H-3.5_1x03_P3.5mm_Horizontal +Connector Phoenix Contact, SPT 1.5/3-H-3.5 Terminal Block, 1990740 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1990740), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 1.5/3-H-3.5 1990740 +0 +6 +3 +Connector_Phoenix_SPT +PhoenixContact_SPT_1.5_4-H-3.5_1x04_P3.5mm_Horizontal +Connector Phoenix Contact, SPT 1.5/4-H-3.5 Terminal Block, 1990753 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1990753), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 1.5/4-H-3.5 1990753 +0 +8 +4 +Connector_Phoenix_SPT +PhoenixContact_SPT_1.5_5-H-3.5_1x05_P3.5mm_Horizontal +Connector Phoenix Contact, SPT 1.5/5-H-3.5 Terminal Block, 1990766 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1990766), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 1.5/5-H-3.5 1990766 +0 +10 +5 +Connector_Phoenix_SPT +PhoenixContact_SPT_1.5_6-H-3.5_1x06_P3.5mm_Horizontal +Connector Phoenix Contact, SPT 1.5/6-H-3.5 Terminal Block, 1990779 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1990779), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 1.5/6-H-3.5 1990779 +0 +12 +6 +Connector_Phoenix_SPT +PhoenixContact_SPT_1.5_7-H-3.5_1x07_P3.5mm_Horizontal +Connector Phoenix Contact, SPT 1.5/7-H-3.5 Terminal Block, 1990782 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1990782), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 1.5/7-H-3.5 1990782 +0 +14 +7 +Connector_Phoenix_SPT +PhoenixContact_SPT_1.5_8-H-3.5_1x08_P3.5mm_Horizontal +Connector Phoenix Contact, SPT 1.5/8-H-3.5 Terminal Block, 1990795 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1990795), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 1.5/8-H-3.5 1990795 +0 +16 +8 +Connector_Phoenix_SPT +PhoenixContact_SPT_1.5_9-H-3.5_1x09_P3.5mm_Horizontal +Connector Phoenix Contact, SPT 1.5/9-H-3.5 Terminal Block, 1990805 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1990805), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 1.5/9-H-3.5 1990805 +0 +18 +9 +Connector_Phoenix_SPT +PhoenixContact_SPT_1.5_10-H-3.5_1x10_P3.5mm_Horizontal +Connector Phoenix Contact, SPT 1.5/10-H-3.5 Terminal Block, 1990818 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1990818), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 1.5/10-H-3.5 1990818 +0 +20 +10 +Connector_Phoenix_SPT +PhoenixContact_SPT_1.5_11-H-3.5_1x11_P3.5mm_Horizontal +Connector Phoenix Contact, SPT 1.5/11-H-3.5 Terminal Block, 1990821 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1990821), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 1.5/11-H-3.5 1990821 +0 +22 +11 +Connector_Phoenix_SPT +PhoenixContact_SPT_1.5_12-H-3.5_1x12_P3.5mm_Horizontal +Connector Phoenix Contact, SPT 1.5/12-H-3.5 Terminal Block, 1990834 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1990834), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 1.5/12-H-3.5 1990834 +0 +24 +12 +Connector_Phoenix_SPT +PhoenixContact_SPT_2.5_1-H-5.0_1x01_P5.0mm_Horizontal +Connector Phoenix Contact, SPT 2.5/1-H-5.0 Terminal Block, 1751066 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1751066), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 2.5/1-H-5.0 1751066 +0 +2 +1 +Connector_Phoenix_SPT +PhoenixContact_SPT_2.5_2-H-5.0-EX_1x02_P5.0mm_Horizontal +Connector Phoenix Contact, SPT 2.5/2-H-5.0-EX Terminal Block, 1732386 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732386), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 2.5/2-H-5.0-EX 1732386 +0 +4 +2 +Connector_Phoenix_SPT +PhoenixContact_SPT_2.5_2-H-5.0_1x02_P5.0mm_Horizontal +Connector Phoenix Contact, SPT 2.5/2-H-5.0 Terminal Block, 1990973 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1990973), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 2.5/2-H-5.0 1990973 +0 +4 +2 +Connector_Phoenix_SPT +PhoenixContact_SPT_2.5_2-V-5.0-EX_1x02_P5.0mm_Vertical +Connector Phoenix Contact, SPT 2.5/2-V-5.0-EX Terminal Block, 1732496 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732496), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 2.5/2-V-5.0-EX 1732496 +0 +4 +2 +Connector_Phoenix_SPT +PhoenixContact_SPT_2.5_3-H-5.0-EX_1x03_P5.0mm_Horizontal +Connector Phoenix Contact, SPT 2.5/3-H-5.0-EX Terminal Block, 1732399 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732399), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 2.5/3-H-5.0-EX 1732399 +0 +6 +3 +Connector_Phoenix_SPT +PhoenixContact_SPT_2.5_3-H-5.0_1x03_P5.0mm_Horizontal +Connector Phoenix Contact, SPT 2.5/3-H-5.0 Terminal Block, 1990986 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1990986), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 2.5/3-H-5.0 1990986 +0 +6 +3 +Connector_Phoenix_SPT +PhoenixContact_SPT_2.5_3-V-5.0-EX_1x03_P5.0mm_Vertical +Connector Phoenix Contact, SPT 2.5/3-V-5.0-EX Terminal Block, 1732506 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732506), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 2.5/3-V-5.0-EX 1732506 +0 +6 +3 +Connector_Phoenix_SPT +PhoenixContact_SPT_2.5_4-H-5.0-EX_1x04_P5.0mm_Horizontal +Connector Phoenix Contact, SPT 2.5/4-H-5.0-EX Terminal Block, 1732409 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732409), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 2.5/4-H-5.0-EX 1732409 +0 +8 +4 +Connector_Phoenix_SPT +PhoenixContact_SPT_2.5_4-H-5.0_1x04_P5.0mm_Horizontal +Connector Phoenix Contact, SPT 2.5/4-H-5.0 Terminal Block, 1990999 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1990999), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 2.5/4-H-5.0 1990999 +0 +8 +4 +Connector_Phoenix_SPT +PhoenixContact_SPT_2.5_4-V-5.0-EX_1x04_P5.0mm_Vertical +Connector Phoenix Contact, SPT 2.5/4-V-5.0-EX Terminal Block, 1732519 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732519), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 2.5/4-V-5.0-EX 1732519 +0 +8 +4 +Connector_Phoenix_SPT +PhoenixContact_SPT_2.5_5-H-5.0-EX_1x05_P5.0mm_Horizontal +Connector Phoenix Contact, SPT 2.5/5-H-5.0-EX Terminal Block, 1732412 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732412), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 2.5/5-H-5.0-EX 1732412 +0 +10 +5 +Connector_Phoenix_SPT +PhoenixContact_SPT_2.5_5-H-5.0_1x05_P5.0mm_Horizontal +Connector Phoenix Contact, SPT 2.5/5-H-5.0 Terminal Block, 1991008 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1991008), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 2.5/5-H-5.0 1991008 +0 +10 +5 +Connector_Phoenix_SPT +PhoenixContact_SPT_2.5_5-V-5.0-EX_1x05_P5.0mm_Vertical +Connector Phoenix Contact, SPT 2.5/5-V-5.0-EX Terminal Block, 1732522 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732522), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 2.5/5-V-5.0-EX 1732522 +0 +10 +5 +Connector_Phoenix_SPT +PhoenixContact_SPT_2.5_6-H-5.0-EX_1x06_P5.0mm_Horizontal +Connector Phoenix Contact, SPT 2.5/6-H-5.0-EX Terminal Block, 1732425 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732425), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 2.5/6-H-5.0-EX 1732425 +0 +12 +6 +Connector_Phoenix_SPT +PhoenixContact_SPT_2.5_6-H-5.0_1x06_P5.0mm_Horizontal +Connector Phoenix Contact, SPT 2.5/6-H-5.0 Terminal Block, 1991011 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1991011), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 2.5/6-H-5.0 1991011 +0 +12 +6 +Connector_Phoenix_SPT +PhoenixContact_SPT_2.5_6-V-5.0-EX_1x06_P5.0mm_Vertical +Connector Phoenix Contact, SPT 2.5/6-V-5.0-EX Terminal Block, 1732535 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732535), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 2.5/6-V-5.0-EX 1732535 +0 +12 +6 +Connector_Phoenix_SPT +PhoenixContact_SPT_2.5_7-H-5.0-EX_1x07_P5.0mm_Horizontal +Connector Phoenix Contact, SPT 2.5/7-H-5.0-EX Terminal Block, 1732438 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732438), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 2.5/7-H-5.0-EX 1732438 +0 +14 +7 +Connector_Phoenix_SPT +PhoenixContact_SPT_2.5_7-H-5.0_1x07_P5.0mm_Horizontal +Connector Phoenix Contact, SPT 2.5/7-H-5.0 Terminal Block, 1991024 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1991024), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 2.5/7-H-5.0 1991024 +0 +14 +7 +Connector_Phoenix_SPT +PhoenixContact_SPT_2.5_7-V-5.0-EX_1x07_P5.0mm_Vertical +Connector Phoenix Contact, SPT 2.5/7-V-5.0-EX Terminal Block, 1732548 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732548), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 2.5/7-V-5.0-EX 1732548 +0 +14 +7 +Connector_Phoenix_SPT +PhoenixContact_SPT_2.5_8-H-5.0-EX_1x08_P5.0mm_Horizontal +Connector Phoenix Contact, SPT 2.5/8-H-5.0-EX Terminal Block, 1732441 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732441), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 2.5/8-H-5.0-EX 1732441 +0 +16 +8 +Connector_Phoenix_SPT +PhoenixContact_SPT_2.5_8-H-5.0_1x08_P5.0mm_Horizontal +Connector Phoenix Contact, SPT 2.5/8-H-5.0 Terminal Block, 1991037 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1991037), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 2.5/8-H-5.0 1991037 +0 +16 +8 +Connector_Phoenix_SPT +PhoenixContact_SPT_2.5_8-V-5.0-EX_1x08_P5.0mm_Vertical +Connector Phoenix Contact, SPT 2.5/8-V-5.0-EX Terminal Block, 1732551 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732551), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 2.5/8-V-5.0-EX 1732551 +0 +16 +8 +Connector_Phoenix_SPT +PhoenixContact_SPT_2.5_9-H-5.0-EX_1x09_P5.0mm_Horizontal +Connector Phoenix Contact, SPT 2.5/9-H-5.0-EX Terminal Block, 1732454 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732454), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 2.5/9-H-5.0-EX 1732454 +0 +18 +9 +Connector_Phoenix_SPT +PhoenixContact_SPT_2.5_9-H-5.0_1x09_P5.0mm_Horizontal +Connector Phoenix Contact, SPT 2.5/9-H-5.0 Terminal Block, 1991040 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1991040), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 2.5/9-H-5.0 1991040 +0 +18 +9 +Connector_Phoenix_SPT +PhoenixContact_SPT_2.5_9-V-5.0-EX_1x09_P5.0mm_Vertical +Connector Phoenix Contact, SPT 2.5/9-V-5.0-EX Terminal Block, 1732564 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732564), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 2.5/9-V-5.0-EX 1732564 +0 +18 +9 +Connector_Phoenix_SPT +PhoenixContact_SPT_2.5_10-H-5.0-EX_1x10_P5.0mm_Horizontal +Connector Phoenix Contact, SPT 2.5/10-H-5.0-EX Terminal Block, 1732467 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732467), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 2.5/10-H-5.0-EX 1732467 +0 +20 +10 +Connector_Phoenix_SPT +PhoenixContact_SPT_2.5_10-H-5.0_1x10_P5.0mm_Horizontal +Connector Phoenix Contact, SPT 2.5/10-H-5.0 Terminal Block, 1991053 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1991053), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 2.5/10-H-5.0 1991053 +0 +20 +10 +Connector_Phoenix_SPT +PhoenixContact_SPT_2.5_10-V-5.0-EX_1x10_P5.0mm_Vertical +Connector Phoenix Contact, SPT 2.5/10-V-5.0-EX Terminal Block, 1732577 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732577), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 2.5/10-V-5.0-EX 1732577 +0 +20 +10 +Connector_Phoenix_SPT +PhoenixContact_SPT_2.5_11-H-5.0-EX_1x11_P5.0mm_Horizontal +Connector Phoenix Contact, SPT 2.5/11-H-5.0-EX Terminal Block, 1732470 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732470), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 2.5/11-H-5.0-EX 1732470 +0 +22 +11 +Connector_Phoenix_SPT +PhoenixContact_SPT_2.5_11-H-5.0_1x11_P5.0mm_Horizontal +Connector Phoenix Contact, SPT 2.5/11-H-5.0 Terminal Block, 1991066 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1991066), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 2.5/11-H-5.0 1991066 +0 +22 +11 +Connector_Phoenix_SPT +PhoenixContact_SPT_2.5_11-V-5.0-EX_1x11_P5.0mm_Vertical +Connector Phoenix Contact, SPT 2.5/11-V-5.0-EX Terminal Block, 1732580 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732580), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 2.5/11-V-5.0-EX 1732580 +0 +22 +11 +Connector_Phoenix_SPT +PhoenixContact_SPT_2.5_12-H-5.0-EX_1x12_P5.0mm_Horizontal +Connector Phoenix Contact, SPT 2.5/12-H-5.0-EX Terminal Block, 1732483 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732483), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 2.5/12-H-5.0-EX 1732483 +0 +24 +12 +Connector_Phoenix_SPT +PhoenixContact_SPT_2.5_12-H-5.0_1x12_P5.0mm_Horizontal +Connector Phoenix Contact, SPT 2.5/12-H-5.0 Terminal Block, 1991079 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1991079), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 2.5/12-H-5.0 1991079 +0 +24 +12 +Connector_Phoenix_SPT +PhoenixContact_SPT_2.5_12-V-5.0-EX_1x12_P5.0mm_Vertical +Connector Phoenix Contact, SPT 2.5/12-V-5.0-EX Terminal Block, 1732593 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1732593), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 2.5/12-V-5.0-EX 1732593 +0 +24 +12 +Connector_Phoenix_SPT +PhoenixContact_SPT_5_1-H-7.5_1x01_P7.5mm_Horizontal +Connector Phoenix Contact, SPT 5/1-H-7.5 Terminal Block, 1719189 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719189), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 5/1-H-7.5 1719189 +0 +2 +1 +Connector_Phoenix_SPT +PhoenixContact_SPT_5_1-V-7.5_1x01_P7.5mm_Vertical +Connector Phoenix Contact, SPT 5/1-V-7.5 Terminal Block, 1719309 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719309), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 5/1-V-7.5 1719309 +0 +2 +1 +Connector_Phoenix_SPT +PhoenixContact_SPT_5_2-H-7.5-ZB_1x02_P7.5mm_Horizontal +Connector Phoenix Contact, SPT 5/2-H-7.5-ZB Terminal Block, 1719192 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719192), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 5/2-H-7.5-ZB 1719192 +0 +2 +2 +Connector_Phoenix_SPT +PhoenixContact_SPT_5_2-V-7.5_1x02_P7.5mm_Vertical +Connector Phoenix Contact, SPT 5/2-V-7.5 Terminal Block, 1738144 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1738144), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 5/2-V-7.5 1738144 +0 +4 +2 +Connector_Phoenix_SPT +PhoenixContact_SPT_5_3-H-7.5-ZB_1x03_P7.5mm_Horizontal +Connector Phoenix Contact, SPT 5/3-H-7.5-ZB Terminal Block, 1719202 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719202), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 5/3-H-7.5-ZB 1719202 +0 +3 +3 +Connector_Phoenix_SPT +PhoenixContact_SPT_5_3-H-7.5_1x03_P7.5mm_Horizontal +Connector Phoenix Contact, SPT 5/3-H-7.5 Terminal Block, 1701361 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1701361), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 5/3-H-7.5 1701361 +0 +6 +3 +Connector_Phoenix_SPT +PhoenixContact_SPT_5_3-V-7.5-ZB_1x03_P7.5mm_Vertical +Connector Phoenix Contact, SPT 5/3-V-7.5-ZB Terminal Block, 1719325 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719325), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 5/3-V-7.5-ZB 1719325 +0 +3 +3 +Connector_Phoenix_SPT +PhoenixContact_SPT_5_4-H-7.5-ZB_1x04_P7.5mm_Horizontal +Connector Phoenix Contact, SPT 5/4-H-7.5-ZB Terminal Block, 1719215 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719215), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 5/4-H-7.5-ZB 1719215 +0 +4 +4 +Connector_Phoenix_SPT +PhoenixContact_SPT_5_5-H-7.5-ZB_1x05_P7.5mm_Horizontal +Connector Phoenix Contact, SPT 5/5-H-7.5-ZB Terminal Block, 1719228 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719228), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 5/5-H-7.5-ZB 1719228 +0 +5 +5 +Connector_Phoenix_SPT +PhoenixContact_SPT_5_5-V-7.5-ZB_1x05_P7.5mm_Vertical +Connector Phoenix Contact, SPT 5/5-V-7.5-ZB Terminal Block, 1719341 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719341), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 5/5-V-7.5-ZB 1719341 +0 +5 +5 +Connector_Phoenix_SPT +PhoenixContact_SPT_5_6-H-7.5-ZB_1x06_P7.5mm_Horizontal +Connector Phoenix Contact, SPT 5/6-H-7.5-ZB Terminal Block, 1719231 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719231), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 5/6-H-7.5-ZB 1719231 +0 +6 +6 +Connector_Phoenix_SPT +PhoenixContact_SPT_5_6-V-7.5-ZB_1x06_P7.5mm_Vertical +Connector Phoenix Contact, SPT 5/6-V-7.5-ZB Terminal Block, 1719354 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719354), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 5/6-V-7.5-ZB 1719354 +0 +6 +6 +Connector_Phoenix_SPT +PhoenixContact_SPT_5_7-H-7.5-ZB_1x07_P7.5mm_Horizontal +Connector Phoenix Contact, SPT 5/7-H-7.5-ZB Terminal Block, 1719244 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719244), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 5/7-H-7.5-ZB 1719244 +0 +7 +7 +Connector_Phoenix_SPT +PhoenixContact_SPT_5_7-V-7.5-ZB_1x07_P7.5mm_Vertical +Connector Phoenix Contact, SPT 5/7-V-7.5-ZB Terminal Block, 1719367 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719367), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 5/7-V-7.5-ZB 1719367 +0 +7 +7 +Connector_Phoenix_SPT +PhoenixContact_SPT_5_8-H-7.5-ZB_1x08_P7.5mm_Horizontal +Connector Phoenix Contact, SPT 5/8-H-7.5-ZB Terminal Block, 1719257 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719257), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 5/8-H-7.5-ZB 1719257 +0 +8 +8 +Connector_Phoenix_SPT +PhoenixContact_SPT_5_8-V-7.5-ZB_1x08_P7.5mm_Vertical +Connector Phoenix Contact, SPT 5/8-V-7.5-ZB Terminal Block, 1719370 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719370), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 5/8-V-7.5-ZB 1719370 +0 +8 +8 +Connector_Phoenix_SPT +PhoenixContact_SPT_5_9-H-7.5-ZB_1x09_P7.5mm_Horizontal +Connector Phoenix Contact, SPT 5/9-H-7.5-ZB Terminal Block, 1719260 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719260), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 5/9-H-7.5-ZB 1719260 +0 +9 +9 +Connector_Phoenix_SPT +PhoenixContact_SPT_5_9-V-7.5-ZB_1x09_P7.5mm_Vertical +Connector Phoenix Contact, SPT 5/9-V-7.5-ZB Terminal Block, 1719383 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719383), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 5/9-V-7.5-ZB 1719383 +0 +9 +9 +Connector_Phoenix_SPT +PhoenixContact_SPT_5_10-H-7.5-ZB_1x10_P7.5mm_Horizontal +Connector Phoenix Contact, SPT 5/10-H-7.5-ZB Terminal Block, 1719273 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719273), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 5/10-H-7.5-ZB 1719273 +0 +10 +10 +Connector_Phoenix_SPT +PhoenixContact_SPT_5_10-V-7.5-ZB_1x10_P7.5mm_Vertical +Connector Phoenix Contact, SPT 5/10-V-7.5-ZB Terminal Block, 1719396 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719396), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 5/10-V-7.5-ZB 1719396 +0 +10 +10 +Connector_Phoenix_SPT +PhoenixContact_SPT_5_11-H-7.5-ZB_1x11_P7.5mm_Horizontal +Connector Phoenix Contact, SPT 5/11-H-7.5-ZB Terminal Block, 1719286 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719286), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 5/11-H-7.5-ZB 1719286 +0 +11 +11 +Connector_Phoenix_SPT +PhoenixContact_SPT_5_11-V-7.5-ZB_1x11_P7.5mm_Vertical +Connector Phoenix Contact, SPT 5/11-V-7.5-ZB Terminal Block, 1719406 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719406), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 5/11-V-7.5-ZB 1719406 +0 +11 +11 +Connector_Phoenix_SPT +PhoenixContact_SPT_5_12-H-7.5-ZB_1x12_P7.5mm_Horizontal +Connector Phoenix Contact, SPT 5/12-H-7.5-ZB Terminal Block, 1719299 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719299), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 5/12-H-7.5-ZB 1719299 +0 +12 +12 +Connector_Phoenix_SPT +PhoenixContact_SPT_5_12-V-7.5-ZB_1x12_P7.5mm_Vertical +Connector Phoenix Contact, SPT 5/12-V-7.5-ZB Terminal Block, 1719419 (https://www.phoenixcontact.com/online/portal/gb/?uri=pxc-oc-itemdetail:pid=1719419), generated with kicad-footprint-generator +Connector Phoenix Contact SPT 5/12-V-7.5-ZB 1719419 +0 +12 +12 +Connector_Pin +Pin_D0.7mm_L6.5mm_W1.8mm_FlatFork +solder Pin_ with flat fork, hole diameter 0.7mm, length 6.5mm, width 1.8mm +solder Pin_ with flat fork +0 +1 +1 +Connector_Pin +Pin_D0.9mm_L10.0mm_W2.4mm_FlatFork +solder Pin_ with flat fork, hole diameter 0.9mm, length 10.0mm, width 2.4mm +solder Pin_ with flat fork +0 +1 +1 +Connector_Pin +Pin_D1.0mm_L10.0mm +solder Pin_ diameter 1.0mm, hole diameter 1.0mm (press fit), length 10.0mm +solder Pin_ press fit +0 +1 +1 +Connector_Pin +Pin_D1.0mm_L10.0mm_LooseFit +solder Pin_ diameter 1.0mm, hole diameter 1.2mm (loose fit), length 10.0mm +solder Pin_ loose fit +0 +1 +1 +Connector_Pin +Pin_D1.1mm_L8.5mm_W2.5mm_FlatFork +solder Pin_ with flat fork, hole diameter 1.1mm, length 8.5mm, width 2.5mm +solder Pin_ with flat fork +0 +1 +1 +Connector_Pin +Pin_D1.1mm_L10.2mm_W3.5mm_Flat +solder Pin_ with flat with hole, hole diameter 1.1mm, length 10.2mm, width 3.5mm +solder Pin_ with flat fork +0 +1 +1 +Connector_Pin +Pin_D1.2mm_L10.2mm_W2.9mm_FlatFork +solder Pin_ with flat with fork, hole diameter 1.2mm, length 11.3mm, width 3.0mm +solder Pin_ with flat fork +0 +1 +1 +Connector_Pin +Pin_D1.2mm_L11.3mm_W3.0mm_Flat +solder Pin_ with flat with hole, hole diameter 1.2mm, length 11.3mm, width 3.0mm +solder Pin_ with flat fork +0 +1 +1 +Connector_Pin +Pin_D1.3mm_L10.0mm_W3.5mm_Flat +solder Pin_ with flat with hole, hole diameter 1.3mm, length 10.0mm, width 3.5mm, e.g. Ettinger 13.13.865, https://katalog.ettinger.de/#p=434 +solder Pin_ with flat fork +0 +1 +1 +Connector_Pin +Pin_D1.3mm_L11.0mm +solder Pin_ diameter 1.3mm, hole diameter 1.3mm, length 11.0mm +solder Pin_ pressfit +0 +1 +1 +Connector_Pin +Pin_D1.3mm_L11.0mm_LooseFit +solder Pin_ diameter 1.3mm, hole diameter 1.5mm (loose fit), length 11.0mm +solder Pin_ loose fit +0 +1 +1 +Connector_Pin +Pin_D1.3mm_L11.3mm_W2.8mm_Flat +solder Pin_ with flat with hole, hole diameter 1.3mm, length 11.3mm, width 2.8mm +solder Pin_ with flat fork +0 +1 +1 +Connector_Pin +Pin_D1.4mm_L8.5mm_W2.8mm_FlatFork +solder Pin_ with flat with fork, hole diameter 1.4mm, length 8.5mm, width 2.8mm, e.g. Ettinger 13.13.890, https://katalog.ettinger.de/#p=434 +solder Pin_ with flat fork +0 +1 +1 +Connector_PinHeader_1.00mm +PinHeader_1x01_P1.00mm_Horizontal +Through hole angled pin header, 1x01, 1.00mm pitch, 2.0mm pin length, single row +Through hole angled pin header THT 1x01 1.00mm single row +0 +1 +1 +Connector_PinHeader_1.00mm +PinHeader_1x01_P1.00mm_Vertical +Through hole straight pin header, 1x01, 1.00mm pitch, single row +Through hole pin header THT 1x01 1.00mm single row +0 +1 +1 +Connector_PinHeader_1.00mm +PinHeader_1x02_P1.00mm_Horizontal +Through hole angled pin header, 1x02, 1.00mm pitch, 2.0mm pin length, single row +Through hole angled pin header THT 1x02 1.00mm single row +0 +2 +2 +Connector_PinHeader_1.00mm +PinHeader_1x02_P1.00mm_Vertical +Through hole straight pin header, 1x02, 1.00mm pitch, single row +Through hole pin header THT 1x02 1.00mm single row +0 +2 +2 +Connector_PinHeader_1.00mm +PinHeader_1x02_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x02, 1.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x02 1.00mm single row style1 pin1 left +0 +2 +2 +Connector_PinHeader_1.00mm +PinHeader_1x02_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x02, 1.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x02 1.00mm single row style2 pin1 right +0 +2 +2 +Connector_PinHeader_1.00mm +PinHeader_1x03_P1.00mm_Horizontal +Through hole angled pin header, 1x03, 1.00mm pitch, 2.0mm pin length, single row +Through hole angled pin header THT 1x03 1.00mm single row +0 +3 +3 +Connector_PinHeader_1.00mm +PinHeader_1x03_P1.00mm_Vertical +Through hole straight pin header, 1x03, 1.00mm pitch, single row +Through hole pin header THT 1x03 1.00mm single row +0 +3 +3 +Connector_PinHeader_1.00mm +PinHeader_1x03_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x03, 1.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x03 1.00mm single row style1 pin1 left +0 +3 +3 +Connector_PinHeader_1.00mm +PinHeader_1x03_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x03, 1.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x03 1.00mm single row style2 pin1 right +0 +3 +3 +Connector_PinHeader_1.00mm +PinHeader_1x04_P1.00mm_Horizontal +Through hole angled pin header, 1x04, 1.00mm pitch, 2.0mm pin length, single row +Through hole angled pin header THT 1x04 1.00mm single row +0 +4 +4 +Connector_PinHeader_1.00mm +PinHeader_1x04_P1.00mm_Vertical +Through hole straight pin header, 1x04, 1.00mm pitch, single row +Through hole pin header THT 1x04 1.00mm single row +0 +4 +4 +Connector_PinHeader_1.00mm +PinHeader_1x04_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x04, 1.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x04 1.00mm single row style1 pin1 left +0 +4 +4 +Connector_PinHeader_1.00mm +PinHeader_1x04_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x04, 1.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x04 1.00mm single row style2 pin1 right +0 +4 +4 +Connector_PinHeader_1.00mm +PinHeader_1x05_P1.00mm_Horizontal +Through hole angled pin header, 1x05, 1.00mm pitch, 2.0mm pin length, single row +Through hole angled pin header THT 1x05 1.00mm single row +0 +5 +5 +Connector_PinHeader_1.00mm +PinHeader_1x05_P1.00mm_Vertical +Through hole straight pin header, 1x05, 1.00mm pitch, single row +Through hole pin header THT 1x05 1.00mm single row +0 +5 +5 +Connector_PinHeader_1.00mm +PinHeader_1x05_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x05, 1.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x05 1.00mm single row style1 pin1 left +0 +5 +5 +Connector_PinHeader_1.00mm +PinHeader_1x05_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x05, 1.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x05 1.00mm single row style2 pin1 right +0 +5 +5 +Connector_PinHeader_1.00mm +PinHeader_1x06_P1.00mm_Horizontal +Through hole angled pin header, 1x06, 1.00mm pitch, 2.0mm pin length, single row +Through hole angled pin header THT 1x06 1.00mm single row +0 +6 +6 +Connector_PinHeader_1.00mm +PinHeader_1x06_P1.00mm_Vertical +Through hole straight pin header, 1x06, 1.00mm pitch, single row +Through hole pin header THT 1x06 1.00mm single row +0 +6 +6 +Connector_PinHeader_1.00mm +PinHeader_1x06_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x06, 1.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x06 1.00mm single row style1 pin1 left +0 +6 +6 +Connector_PinHeader_1.00mm +PinHeader_1x06_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x06, 1.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x06 1.00mm single row style2 pin1 right +0 +6 +6 +Connector_PinHeader_1.00mm +PinHeader_1x07_P1.00mm_Horizontal +Through hole angled pin header, 1x07, 1.00mm pitch, 2.0mm pin length, single row +Through hole angled pin header THT 1x07 1.00mm single row +0 +7 +7 +Connector_PinHeader_1.00mm +PinHeader_1x07_P1.00mm_Vertical +Through hole straight pin header, 1x07, 1.00mm pitch, single row +Through hole pin header THT 1x07 1.00mm single row +0 +7 +7 +Connector_PinHeader_1.00mm +PinHeader_1x07_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x07, 1.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x07 1.00mm single row style1 pin1 left +0 +7 +7 +Connector_PinHeader_1.00mm +PinHeader_1x07_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x07, 1.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x07 1.00mm single row style2 pin1 right +0 +7 +7 +Connector_PinHeader_1.00mm +PinHeader_1x08_P1.00mm_Horizontal +Through hole angled pin header, 1x08, 1.00mm pitch, 2.0mm pin length, single row +Through hole angled pin header THT 1x08 1.00mm single row +0 +8 +8 +Connector_PinHeader_1.00mm +PinHeader_1x08_P1.00mm_Vertical +Through hole straight pin header, 1x08, 1.00mm pitch, single row +Through hole pin header THT 1x08 1.00mm single row +0 +8 +8 +Connector_PinHeader_1.00mm +PinHeader_1x08_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x08, 1.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x08 1.00mm single row style1 pin1 left +0 +8 +8 +Connector_PinHeader_1.00mm +PinHeader_1x08_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x08, 1.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x08 1.00mm single row style2 pin1 right +0 +8 +8 +Connector_PinHeader_1.00mm +PinHeader_1x09_P1.00mm_Horizontal +Through hole angled pin header, 1x09, 1.00mm pitch, 2.0mm pin length, single row +Through hole angled pin header THT 1x09 1.00mm single row +0 +9 +9 +Connector_PinHeader_1.00mm +PinHeader_1x09_P1.00mm_Vertical +Through hole straight pin header, 1x09, 1.00mm pitch, single row +Through hole pin header THT 1x09 1.00mm single row +0 +9 +9 +Connector_PinHeader_1.00mm +PinHeader_1x09_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x09, 1.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x09 1.00mm single row style1 pin1 left +0 +9 +9 +Connector_PinHeader_1.00mm +PinHeader_1x09_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x09, 1.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x09 1.00mm single row style2 pin1 right +0 +9 +9 +Connector_PinHeader_1.00mm +PinHeader_1x10_P1.00mm_Horizontal +Through hole angled pin header, 1x10, 1.00mm pitch, 2.0mm pin length, single row +Through hole angled pin header THT 1x10 1.00mm single row +0 +10 +10 +Connector_PinHeader_1.00mm +PinHeader_1x10_P1.00mm_Vertical +Through hole straight pin header, 1x10, 1.00mm pitch, single row +Through hole pin header THT 1x10 1.00mm single row +0 +10 +10 +Connector_PinHeader_1.00mm +PinHeader_1x10_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x10, 1.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x10 1.00mm single row style1 pin1 left +0 +10 +10 +Connector_PinHeader_1.00mm +PinHeader_1x10_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x10, 1.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x10 1.00mm single row style2 pin1 right +0 +10 +10 +Connector_PinHeader_1.00mm +PinHeader_1x11_P1.00mm_Horizontal +Through hole angled pin header, 1x11, 1.00mm pitch, 2.0mm pin length, single row +Through hole angled pin header THT 1x11 1.00mm single row +0 +11 +11 +Connector_PinHeader_1.00mm +PinHeader_1x11_P1.00mm_Vertical +Through hole straight pin header, 1x11, 1.00mm pitch, single row +Through hole pin header THT 1x11 1.00mm single row +0 +11 +11 +Connector_PinHeader_1.00mm +PinHeader_1x11_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x11, 1.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x11 1.00mm single row style1 pin1 left +0 +11 +11 +Connector_PinHeader_1.00mm +PinHeader_1x11_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x11, 1.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x11 1.00mm single row style2 pin1 right +0 +11 +11 +Connector_PinHeader_1.00mm +PinHeader_1x12_P1.00mm_Horizontal +Through hole angled pin header, 1x12, 1.00mm pitch, 2.0mm pin length, single row +Through hole angled pin header THT 1x12 1.00mm single row +0 +12 +12 +Connector_PinHeader_1.00mm +PinHeader_1x12_P1.00mm_Vertical +Through hole straight pin header, 1x12, 1.00mm pitch, single row +Through hole pin header THT 1x12 1.00mm single row +0 +12 +12 +Connector_PinHeader_1.00mm +PinHeader_1x12_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x12, 1.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x12 1.00mm single row style1 pin1 left +0 +12 +12 +Connector_PinHeader_1.00mm +PinHeader_1x12_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x12, 1.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x12 1.00mm single row style2 pin1 right +0 +12 +12 +Connector_PinHeader_1.00mm +PinHeader_1x13_P1.00mm_Horizontal +Through hole angled pin header, 1x13, 1.00mm pitch, 2.0mm pin length, single row +Through hole angled pin header THT 1x13 1.00mm single row +0 +13 +13 +Connector_PinHeader_1.00mm +PinHeader_1x13_P1.00mm_Vertical +Through hole straight pin header, 1x13, 1.00mm pitch, single row +Through hole pin header THT 1x13 1.00mm single row +0 +13 +13 +Connector_PinHeader_1.00mm +PinHeader_1x13_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x13, 1.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x13 1.00mm single row style1 pin1 left +0 +13 +13 +Connector_PinHeader_1.00mm +PinHeader_1x13_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x13, 1.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x13 1.00mm single row style2 pin1 right +0 +13 +13 +Connector_PinHeader_1.00mm +PinHeader_1x14_P1.00mm_Horizontal +Through hole angled pin header, 1x14, 1.00mm pitch, 2.0mm pin length, single row +Through hole angled pin header THT 1x14 1.00mm single row +0 +14 +14 +Connector_PinHeader_1.00mm +PinHeader_1x14_P1.00mm_Vertical +Through hole straight pin header, 1x14, 1.00mm pitch, single row +Through hole pin header THT 1x14 1.00mm single row +0 +14 +14 +Connector_PinHeader_1.00mm +PinHeader_1x14_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x14, 1.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x14 1.00mm single row style1 pin1 left +0 +14 +14 +Connector_PinHeader_1.00mm +PinHeader_1x14_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x14, 1.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x14 1.00mm single row style2 pin1 right +0 +14 +14 +Connector_PinHeader_1.00mm +PinHeader_1x15_P1.00mm_Horizontal +Through hole angled pin header, 1x15, 1.00mm pitch, 2.0mm pin length, single row +Through hole angled pin header THT 1x15 1.00mm single row +0 +15 +15 +Connector_PinHeader_1.00mm +PinHeader_1x15_P1.00mm_Vertical +Through hole straight pin header, 1x15, 1.00mm pitch, single row +Through hole pin header THT 1x15 1.00mm single row +0 +15 +15 +Connector_PinHeader_1.00mm +PinHeader_1x15_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x15, 1.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x15 1.00mm single row style1 pin1 left +0 +15 +15 +Connector_PinHeader_1.00mm +PinHeader_1x15_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x15, 1.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x15 1.00mm single row style2 pin1 right +0 +15 +15 +Connector_PinHeader_1.00mm +PinHeader_1x16_P1.00mm_Horizontal +Through hole angled pin header, 1x16, 1.00mm pitch, 2.0mm pin length, single row +Through hole angled pin header THT 1x16 1.00mm single row +0 +16 +16 +Connector_PinHeader_1.00mm +PinHeader_1x16_P1.00mm_Vertical +Through hole straight pin header, 1x16, 1.00mm pitch, single row +Through hole pin header THT 1x16 1.00mm single row +0 +16 +16 +Connector_PinHeader_1.00mm +PinHeader_1x16_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x16, 1.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x16 1.00mm single row style1 pin1 left +0 +16 +16 +Connector_PinHeader_1.00mm +PinHeader_1x16_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x16, 1.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x16 1.00mm single row style2 pin1 right +0 +16 +16 +Connector_PinHeader_1.00mm +PinHeader_1x17_P1.00mm_Horizontal +Through hole angled pin header, 1x17, 1.00mm pitch, 2.0mm pin length, single row +Through hole angled pin header THT 1x17 1.00mm single row +0 +17 +17 +Connector_PinHeader_1.00mm +PinHeader_1x17_P1.00mm_Vertical +Through hole straight pin header, 1x17, 1.00mm pitch, single row +Through hole pin header THT 1x17 1.00mm single row +0 +17 +17 +Connector_PinHeader_1.00mm +PinHeader_1x17_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x17, 1.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x17 1.00mm single row style1 pin1 left +0 +17 +17 +Connector_PinHeader_1.00mm +PinHeader_1x17_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x17, 1.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x17 1.00mm single row style2 pin1 right +0 +17 +17 +Connector_PinHeader_1.00mm +PinHeader_1x18_P1.00mm_Horizontal +Through hole angled pin header, 1x18, 1.00mm pitch, 2.0mm pin length, single row +Through hole angled pin header THT 1x18 1.00mm single row +0 +18 +18 +Connector_PinHeader_1.00mm +PinHeader_1x18_P1.00mm_Vertical +Through hole straight pin header, 1x18, 1.00mm pitch, single row +Through hole pin header THT 1x18 1.00mm single row +0 +18 +18 +Connector_PinHeader_1.00mm +PinHeader_1x18_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x18, 1.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x18 1.00mm single row style1 pin1 left +0 +18 +18 +Connector_PinHeader_1.00mm +PinHeader_1x18_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x18, 1.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x18 1.00mm single row style2 pin1 right +0 +18 +18 +Connector_PinHeader_1.00mm +PinHeader_1x19_P1.00mm_Horizontal +Through hole angled pin header, 1x19, 1.00mm pitch, 2.0mm pin length, single row +Through hole angled pin header THT 1x19 1.00mm single row +0 +19 +19 +Connector_PinHeader_1.00mm +PinHeader_1x19_P1.00mm_Vertical +Through hole straight pin header, 1x19, 1.00mm pitch, single row +Through hole pin header THT 1x19 1.00mm single row +0 +19 +19 +Connector_PinHeader_1.00mm +PinHeader_1x19_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x19, 1.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x19 1.00mm single row style1 pin1 left +0 +19 +19 +Connector_PinHeader_1.00mm +PinHeader_1x19_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x19, 1.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x19 1.00mm single row style2 pin1 right +0 +19 +19 +Connector_PinHeader_1.00mm +PinHeader_1x20_P1.00mm_Horizontal +Through hole angled pin header, 1x20, 1.00mm pitch, 2.0mm pin length, single row +Through hole angled pin header THT 1x20 1.00mm single row +0 +20 +20 +Connector_PinHeader_1.00mm +PinHeader_1x20_P1.00mm_Vertical +Through hole straight pin header, 1x20, 1.00mm pitch, single row +Through hole pin header THT 1x20 1.00mm single row +0 +20 +20 +Connector_PinHeader_1.00mm +PinHeader_1x20_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x20, 1.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x20 1.00mm single row style1 pin1 left +0 +20 +20 +Connector_PinHeader_1.00mm +PinHeader_1x20_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x20, 1.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x20 1.00mm single row style2 pin1 right +0 +20 +20 +Connector_PinHeader_1.00mm +PinHeader_1x21_P1.00mm_Horizontal +Through hole angled pin header, 1x21, 1.00mm pitch, 2.0mm pin length, single row +Through hole angled pin header THT 1x21 1.00mm single row +0 +21 +21 +Connector_PinHeader_1.00mm +PinHeader_1x21_P1.00mm_Vertical +Through hole straight pin header, 1x21, 1.00mm pitch, single row +Through hole pin header THT 1x21 1.00mm single row +0 +21 +21 +Connector_PinHeader_1.00mm +PinHeader_1x21_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x21, 1.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x21 1.00mm single row style1 pin1 left +0 +21 +21 +Connector_PinHeader_1.00mm +PinHeader_1x21_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x21, 1.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x21 1.00mm single row style2 pin1 right +0 +21 +21 +Connector_PinHeader_1.00mm +PinHeader_1x22_P1.00mm_Horizontal +Through hole angled pin header, 1x22, 1.00mm pitch, 2.0mm pin length, single row +Through hole angled pin header THT 1x22 1.00mm single row +0 +22 +22 +Connector_PinHeader_1.00mm +PinHeader_1x22_P1.00mm_Vertical +Through hole straight pin header, 1x22, 1.00mm pitch, single row +Through hole pin header THT 1x22 1.00mm single row +0 +22 +22 +Connector_PinHeader_1.00mm +PinHeader_1x22_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x22, 1.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x22 1.00mm single row style1 pin1 left +0 +22 +22 +Connector_PinHeader_1.00mm +PinHeader_1x22_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x22, 1.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x22 1.00mm single row style2 pin1 right +0 +22 +22 +Connector_PinHeader_1.00mm +PinHeader_1x23_P1.00mm_Horizontal +Through hole angled pin header, 1x23, 1.00mm pitch, 2.0mm pin length, single row +Through hole angled pin header THT 1x23 1.00mm single row +0 +23 +23 +Connector_PinHeader_1.00mm +PinHeader_1x23_P1.00mm_Vertical +Through hole straight pin header, 1x23, 1.00mm pitch, single row +Through hole pin header THT 1x23 1.00mm single row +0 +23 +23 +Connector_PinHeader_1.00mm +PinHeader_1x23_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x23, 1.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x23 1.00mm single row style1 pin1 left +0 +23 +23 +Connector_PinHeader_1.00mm +PinHeader_1x23_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x23, 1.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x23 1.00mm single row style2 pin1 right +0 +23 +23 +Connector_PinHeader_1.00mm +PinHeader_1x24_P1.00mm_Horizontal +Through hole angled pin header, 1x24, 1.00mm pitch, 2.0mm pin length, single row +Through hole angled pin header THT 1x24 1.00mm single row +0 +24 +24 +Connector_PinHeader_1.00mm +PinHeader_1x24_P1.00mm_Vertical +Through hole straight pin header, 1x24, 1.00mm pitch, single row +Through hole pin header THT 1x24 1.00mm single row +0 +24 +24 +Connector_PinHeader_1.00mm +PinHeader_1x24_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x24, 1.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x24 1.00mm single row style1 pin1 left +0 +24 +24 +Connector_PinHeader_1.00mm +PinHeader_1x24_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x24, 1.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x24 1.00mm single row style2 pin1 right +0 +24 +24 +Connector_PinHeader_1.00mm +PinHeader_1x25_P1.00mm_Horizontal +Through hole angled pin header, 1x25, 1.00mm pitch, 2.0mm pin length, single row +Through hole angled pin header THT 1x25 1.00mm single row +0 +25 +25 +Connector_PinHeader_1.00mm +PinHeader_1x25_P1.00mm_Vertical +Through hole straight pin header, 1x25, 1.00mm pitch, single row +Through hole pin header THT 1x25 1.00mm single row +0 +25 +25 +Connector_PinHeader_1.00mm +PinHeader_1x25_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x25, 1.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x25 1.00mm single row style1 pin1 left +0 +25 +25 +Connector_PinHeader_1.00mm +PinHeader_1x25_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x25, 1.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x25 1.00mm single row style2 pin1 right +0 +25 +25 +Connector_PinHeader_1.00mm +PinHeader_1x26_P1.00mm_Horizontal +Through hole angled pin header, 1x26, 1.00mm pitch, 2.0mm pin length, single row +Through hole angled pin header THT 1x26 1.00mm single row +0 +26 +26 +Connector_PinHeader_1.00mm +PinHeader_1x26_P1.00mm_Vertical +Through hole straight pin header, 1x26, 1.00mm pitch, single row +Through hole pin header THT 1x26 1.00mm single row +0 +26 +26 +Connector_PinHeader_1.00mm +PinHeader_1x26_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x26, 1.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x26 1.00mm single row style1 pin1 left +0 +26 +26 +Connector_PinHeader_1.00mm +PinHeader_1x26_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x26, 1.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x26 1.00mm single row style2 pin1 right +0 +26 +26 +Connector_PinHeader_1.00mm +PinHeader_1x27_P1.00mm_Horizontal +Through hole angled pin header, 1x27, 1.00mm pitch, 2.0mm pin length, single row +Through hole angled pin header THT 1x27 1.00mm single row +0 +27 +27 +Connector_PinHeader_1.00mm +PinHeader_1x27_P1.00mm_Vertical +Through hole straight pin header, 1x27, 1.00mm pitch, single row +Through hole pin header THT 1x27 1.00mm single row +0 +27 +27 +Connector_PinHeader_1.00mm +PinHeader_1x27_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x27, 1.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x27 1.00mm single row style1 pin1 left +0 +27 +27 +Connector_PinHeader_1.00mm +PinHeader_1x27_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x27, 1.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x27 1.00mm single row style2 pin1 right +0 +27 +27 +Connector_PinHeader_1.00mm +PinHeader_1x28_P1.00mm_Horizontal +Through hole angled pin header, 1x28, 1.00mm pitch, 2.0mm pin length, single row +Through hole angled pin header THT 1x28 1.00mm single row +0 +28 +28 +Connector_PinHeader_1.00mm +PinHeader_1x28_P1.00mm_Vertical +Through hole straight pin header, 1x28, 1.00mm pitch, single row +Through hole pin header THT 1x28 1.00mm single row +0 +28 +28 +Connector_PinHeader_1.00mm +PinHeader_1x28_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x28, 1.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x28 1.00mm single row style1 pin1 left +0 +28 +28 +Connector_PinHeader_1.00mm +PinHeader_1x28_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x28, 1.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x28 1.00mm single row style2 pin1 right +0 +28 +28 +Connector_PinHeader_1.00mm +PinHeader_1x29_P1.00mm_Horizontal +Through hole angled pin header, 1x29, 1.00mm pitch, 2.0mm pin length, single row +Through hole angled pin header THT 1x29 1.00mm single row +0 +29 +29 +Connector_PinHeader_1.00mm +PinHeader_1x29_P1.00mm_Vertical +Through hole straight pin header, 1x29, 1.00mm pitch, single row +Through hole pin header THT 1x29 1.00mm single row +0 +29 +29 +Connector_PinHeader_1.00mm +PinHeader_1x29_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x29, 1.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x29 1.00mm single row style1 pin1 left +0 +29 +29 +Connector_PinHeader_1.00mm +PinHeader_1x29_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x29, 1.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x29 1.00mm single row style2 pin1 right +0 +29 +29 +Connector_PinHeader_1.00mm +PinHeader_1x30_P1.00mm_Horizontal +Through hole angled pin header, 1x30, 1.00mm pitch, 2.0mm pin length, single row +Through hole angled pin header THT 1x30 1.00mm single row +0 +30 +30 +Connector_PinHeader_1.00mm +PinHeader_1x30_P1.00mm_Vertical +Through hole straight pin header, 1x30, 1.00mm pitch, single row +Through hole pin header THT 1x30 1.00mm single row +0 +30 +30 +Connector_PinHeader_1.00mm +PinHeader_1x30_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x30, 1.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x30 1.00mm single row style1 pin1 left +0 +30 +30 +Connector_PinHeader_1.00mm +PinHeader_1x30_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x30, 1.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x30 1.00mm single row style2 pin1 right +0 +30 +30 +Connector_PinHeader_1.00mm +PinHeader_1x31_P1.00mm_Horizontal +Through hole angled pin header, 1x31, 1.00mm pitch, 2.0mm pin length, single row +Through hole angled pin header THT 1x31 1.00mm single row +0 +31 +31 +Connector_PinHeader_1.00mm +PinHeader_1x31_P1.00mm_Vertical +Through hole straight pin header, 1x31, 1.00mm pitch, single row +Through hole pin header THT 1x31 1.00mm single row +0 +31 +31 +Connector_PinHeader_1.00mm +PinHeader_1x31_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x31, 1.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x31 1.00mm single row style1 pin1 left +0 +31 +31 +Connector_PinHeader_1.00mm +PinHeader_1x31_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x31, 1.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x31 1.00mm single row style2 pin1 right +0 +31 +31 +Connector_PinHeader_1.00mm +PinHeader_1x32_P1.00mm_Horizontal +Through hole angled pin header, 1x32, 1.00mm pitch, 2.0mm pin length, single row +Through hole angled pin header THT 1x32 1.00mm single row +0 +32 +32 +Connector_PinHeader_1.00mm +PinHeader_1x32_P1.00mm_Vertical +Through hole straight pin header, 1x32, 1.00mm pitch, single row +Through hole pin header THT 1x32 1.00mm single row +0 +32 +32 +Connector_PinHeader_1.00mm +PinHeader_1x32_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x32, 1.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x32 1.00mm single row style1 pin1 left +0 +32 +32 +Connector_PinHeader_1.00mm +PinHeader_1x32_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x32, 1.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x32 1.00mm single row style2 pin1 right +0 +32 +32 +Connector_PinHeader_1.00mm +PinHeader_1x33_P1.00mm_Horizontal +Through hole angled pin header, 1x33, 1.00mm pitch, 2.0mm pin length, single row +Through hole angled pin header THT 1x33 1.00mm single row +0 +33 +33 +Connector_PinHeader_1.00mm +PinHeader_1x33_P1.00mm_Vertical +Through hole straight pin header, 1x33, 1.00mm pitch, single row +Through hole pin header THT 1x33 1.00mm single row +0 +33 +33 +Connector_PinHeader_1.00mm +PinHeader_1x33_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x33, 1.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x33 1.00mm single row style1 pin1 left +0 +33 +33 +Connector_PinHeader_1.00mm +PinHeader_1x33_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x33, 1.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x33 1.00mm single row style2 pin1 right +0 +33 +33 +Connector_PinHeader_1.00mm +PinHeader_1x34_P1.00mm_Horizontal +Through hole angled pin header, 1x34, 1.00mm pitch, 2.0mm pin length, single row +Through hole angled pin header THT 1x34 1.00mm single row +0 +34 +34 +Connector_PinHeader_1.00mm +PinHeader_1x34_P1.00mm_Vertical +Through hole straight pin header, 1x34, 1.00mm pitch, single row +Through hole pin header THT 1x34 1.00mm single row +0 +34 +34 +Connector_PinHeader_1.00mm +PinHeader_1x34_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x34, 1.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x34 1.00mm single row style1 pin1 left +0 +34 +34 +Connector_PinHeader_1.00mm +PinHeader_1x34_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x34, 1.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x34 1.00mm single row style2 pin1 right +0 +34 +34 +Connector_PinHeader_1.00mm +PinHeader_1x35_P1.00mm_Horizontal +Through hole angled pin header, 1x35, 1.00mm pitch, 2.0mm pin length, single row +Through hole angled pin header THT 1x35 1.00mm single row +0 +35 +35 +Connector_PinHeader_1.00mm +PinHeader_1x35_P1.00mm_Vertical +Through hole straight pin header, 1x35, 1.00mm pitch, single row +Through hole pin header THT 1x35 1.00mm single row +0 +35 +35 +Connector_PinHeader_1.00mm +PinHeader_1x35_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x35, 1.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x35 1.00mm single row style1 pin1 left +0 +35 +35 +Connector_PinHeader_1.00mm +PinHeader_1x35_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x35, 1.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x35 1.00mm single row style2 pin1 right +0 +35 +35 +Connector_PinHeader_1.00mm +PinHeader_1x36_P1.00mm_Horizontal +Through hole angled pin header, 1x36, 1.00mm pitch, 2.0mm pin length, single row +Through hole angled pin header THT 1x36 1.00mm single row +0 +36 +36 +Connector_PinHeader_1.00mm +PinHeader_1x36_P1.00mm_Vertical +Through hole straight pin header, 1x36, 1.00mm pitch, single row +Through hole pin header THT 1x36 1.00mm single row +0 +36 +36 +Connector_PinHeader_1.00mm +PinHeader_1x36_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x36, 1.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x36 1.00mm single row style1 pin1 left +0 +36 +36 +Connector_PinHeader_1.00mm +PinHeader_1x36_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x36, 1.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x36 1.00mm single row style2 pin1 right +0 +36 +36 +Connector_PinHeader_1.00mm +PinHeader_1x37_P1.00mm_Horizontal +Through hole angled pin header, 1x37, 1.00mm pitch, 2.0mm pin length, single row +Through hole angled pin header THT 1x37 1.00mm single row +0 +37 +37 +Connector_PinHeader_1.00mm +PinHeader_1x37_P1.00mm_Vertical +Through hole straight pin header, 1x37, 1.00mm pitch, single row +Through hole pin header THT 1x37 1.00mm single row +0 +37 +37 +Connector_PinHeader_1.00mm +PinHeader_1x37_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x37, 1.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x37 1.00mm single row style1 pin1 left +0 +37 +37 +Connector_PinHeader_1.00mm +PinHeader_1x37_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x37, 1.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x37 1.00mm single row style2 pin1 right +0 +37 +37 +Connector_PinHeader_1.00mm +PinHeader_1x38_P1.00mm_Horizontal +Through hole angled pin header, 1x38, 1.00mm pitch, 2.0mm pin length, single row +Through hole angled pin header THT 1x38 1.00mm single row +0 +38 +38 +Connector_PinHeader_1.00mm +PinHeader_1x38_P1.00mm_Vertical +Through hole straight pin header, 1x38, 1.00mm pitch, single row +Through hole pin header THT 1x38 1.00mm single row +0 +38 +38 +Connector_PinHeader_1.00mm +PinHeader_1x38_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x38, 1.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x38 1.00mm single row style1 pin1 left +0 +38 +38 +Connector_PinHeader_1.00mm +PinHeader_1x38_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x38, 1.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x38 1.00mm single row style2 pin1 right +0 +38 +38 +Connector_PinHeader_1.00mm +PinHeader_1x39_P1.00mm_Horizontal +Through hole angled pin header, 1x39, 1.00mm pitch, 2.0mm pin length, single row +Through hole angled pin header THT 1x39 1.00mm single row +0 +39 +39 +Connector_PinHeader_1.00mm +PinHeader_1x39_P1.00mm_Vertical +Through hole straight pin header, 1x39, 1.00mm pitch, single row +Through hole pin header THT 1x39 1.00mm single row +0 +39 +39 +Connector_PinHeader_1.00mm +PinHeader_1x39_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x39, 1.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x39 1.00mm single row style1 pin1 left +0 +39 +39 +Connector_PinHeader_1.00mm +PinHeader_1x39_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x39, 1.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x39 1.00mm single row style2 pin1 right +0 +39 +39 +Connector_PinHeader_1.00mm +PinHeader_1x40_P1.00mm_Horizontal +Through hole angled pin header, 1x40, 1.00mm pitch, 2.0mm pin length, single row +Through hole angled pin header THT 1x40 1.00mm single row +0 +40 +40 +Connector_PinHeader_1.00mm +PinHeader_1x40_P1.00mm_Vertical +Through hole straight pin header, 1x40, 1.00mm pitch, single row +Through hole pin header THT 1x40 1.00mm single row +0 +40 +40 +Connector_PinHeader_1.00mm +PinHeader_1x40_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x40, 1.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x40 1.00mm single row style1 pin1 left +0 +40 +40 +Connector_PinHeader_1.00mm +PinHeader_1x40_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x40, 1.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x40 1.00mm single row style2 pin1 right +0 +40 +40 +Connector_PinHeader_1.00mm +PinHeader_2x01_P1.00mm_Horizontal +Through hole angled pin header, 2x01, 1.00mm pitch, 2.0mm pin length, double rows +Through hole angled pin header THT 2x01 1.00mm double row +0 +2 +2 +Connector_PinHeader_1.00mm +PinHeader_2x01_P1.00mm_Vertical +Through hole straight pin header, 2x01, 1.00mm pitch, double rows +Through hole pin header THT 2x01 1.00mm double row +0 +2 +2 +Connector_PinHeader_1.00mm +PinHeader_2x01_P1.00mm_Vertical_SMD +surface-mounted straight pin header, 2x01, 1.00mm pitch, double rows +Surface mounted pin header SMD 2x01 1.00mm double row +0 +2 +2 +Connector_PinHeader_1.00mm +PinHeader_2x02_P1.00mm_Horizontal +Through hole angled pin header, 2x02, 1.00mm pitch, 2.0mm pin length, double rows +Through hole angled pin header THT 2x02 1.00mm double row +0 +4 +4 +Connector_PinHeader_1.00mm +PinHeader_2x02_P1.00mm_Vertical +Through hole straight pin header, 2x02, 1.00mm pitch, double rows +Through hole pin header THT 2x02 1.00mm double row +0 +4 +4 +Connector_PinHeader_1.00mm +PinHeader_2x02_P1.00mm_Vertical_SMD +surface-mounted straight pin header, 2x02, 1.00mm pitch, double rows +Surface mounted pin header SMD 2x02 1.00mm double row +0 +4 +4 +Connector_PinHeader_1.00mm +PinHeader_2x03_P1.00mm_Horizontal +Through hole angled pin header, 2x03, 1.00mm pitch, 2.0mm pin length, double rows +Through hole angled pin header THT 2x03 1.00mm double row +0 +6 +6 +Connector_PinHeader_1.00mm +PinHeader_2x03_P1.00mm_Vertical +Through hole straight pin header, 2x03, 1.00mm pitch, double rows +Through hole pin header THT 2x03 1.00mm double row +0 +6 +6 +Connector_PinHeader_1.00mm +PinHeader_2x03_P1.00mm_Vertical_SMD +surface-mounted straight pin header, 2x03, 1.00mm pitch, double rows +Surface mounted pin header SMD 2x03 1.00mm double row +0 +6 +6 +Connector_PinHeader_1.00mm +PinHeader_2x04_P1.00mm_Horizontal +Through hole angled pin header, 2x04, 1.00mm pitch, 2.0mm pin length, double rows +Through hole angled pin header THT 2x04 1.00mm double row +0 +8 +8 +Connector_PinHeader_1.00mm +PinHeader_2x04_P1.00mm_Vertical +Through hole straight pin header, 2x04, 1.00mm pitch, double rows +Through hole pin header THT 2x04 1.00mm double row +0 +8 +8 +Connector_PinHeader_1.00mm +PinHeader_2x04_P1.00mm_Vertical_SMD +surface-mounted straight pin header, 2x04, 1.00mm pitch, double rows +Surface mounted pin header SMD 2x04 1.00mm double row +0 +8 +8 +Connector_PinHeader_1.00mm +PinHeader_2x05_P1.00mm_Horizontal +Through hole angled pin header, 2x05, 1.00mm pitch, 2.0mm pin length, double rows +Through hole angled pin header THT 2x05 1.00mm double row +0 +10 +10 +Connector_PinHeader_1.00mm +PinHeader_2x05_P1.00mm_Vertical +Through hole straight pin header, 2x05, 1.00mm pitch, double rows +Through hole pin header THT 2x05 1.00mm double row +0 +10 +10 +Connector_PinHeader_1.00mm +PinHeader_2x05_P1.00mm_Vertical_SMD +surface-mounted straight pin header, 2x05, 1.00mm pitch, double rows +Surface mounted pin header SMD 2x05 1.00mm double row +0 +10 +10 +Connector_PinHeader_1.00mm +PinHeader_2x06_P1.00mm_Horizontal +Through hole angled pin header, 2x06, 1.00mm pitch, 2.0mm pin length, double rows +Through hole angled pin header THT 2x06 1.00mm double row +0 +12 +12 +Connector_PinHeader_1.00mm +PinHeader_2x06_P1.00mm_Vertical +Through hole straight pin header, 2x06, 1.00mm pitch, double rows +Through hole pin header THT 2x06 1.00mm double row +0 +12 +12 +Connector_PinHeader_1.00mm +PinHeader_2x06_P1.00mm_Vertical_SMD +surface-mounted straight pin header, 2x06, 1.00mm pitch, double rows +Surface mounted pin header SMD 2x06 1.00mm double row +0 +12 +12 +Connector_PinHeader_1.00mm +PinHeader_2x07_P1.00mm_Horizontal +Through hole angled pin header, 2x07, 1.00mm pitch, 2.0mm pin length, double rows +Through hole angled pin header THT 2x07 1.00mm double row +0 +14 +14 +Connector_PinHeader_1.00mm +PinHeader_2x07_P1.00mm_Vertical +Through hole straight pin header, 2x07, 1.00mm pitch, double rows +Through hole pin header THT 2x07 1.00mm double row +0 +14 +14 +Connector_PinHeader_1.00mm +PinHeader_2x07_P1.00mm_Vertical_SMD +surface-mounted straight pin header, 2x07, 1.00mm pitch, double rows +Surface mounted pin header SMD 2x07 1.00mm double row +0 +14 +14 +Connector_PinHeader_1.00mm +PinHeader_2x08_P1.00mm_Horizontal +Through hole angled pin header, 2x08, 1.00mm pitch, 2.0mm pin length, double rows +Through hole angled pin header THT 2x08 1.00mm double row +0 +16 +16 +Connector_PinHeader_1.00mm +PinHeader_2x08_P1.00mm_Vertical +Through hole straight pin header, 2x08, 1.00mm pitch, double rows +Through hole pin header THT 2x08 1.00mm double row +0 +16 +16 +Connector_PinHeader_1.00mm +PinHeader_2x08_P1.00mm_Vertical_SMD +surface-mounted straight pin header, 2x08, 1.00mm pitch, double rows +Surface mounted pin header SMD 2x08 1.00mm double row +0 +16 +16 +Connector_PinHeader_1.00mm +PinHeader_2x09_P1.00mm_Horizontal +Through hole angled pin header, 2x09, 1.00mm pitch, 2.0mm pin length, double rows +Through hole angled pin header THT 2x09 1.00mm double row +0 +18 +18 +Connector_PinHeader_1.00mm +PinHeader_2x09_P1.00mm_Vertical +Through hole straight pin header, 2x09, 1.00mm pitch, double rows +Through hole pin header THT 2x09 1.00mm double row +0 +18 +18 +Connector_PinHeader_1.00mm +PinHeader_2x09_P1.00mm_Vertical_SMD +surface-mounted straight pin header, 2x09, 1.00mm pitch, double rows +Surface mounted pin header SMD 2x09 1.00mm double row +0 +18 +18 +Connector_PinHeader_1.00mm +PinHeader_2x10_P1.00mm_Horizontal +Through hole angled pin header, 2x10, 1.00mm pitch, 2.0mm pin length, double rows +Through hole angled pin header THT 2x10 1.00mm double row +0 +20 +20 +Connector_PinHeader_1.00mm +PinHeader_2x10_P1.00mm_Vertical +Through hole straight pin header, 2x10, 1.00mm pitch, double rows +Through hole pin header THT 2x10 1.00mm double row +0 +20 +20 +Connector_PinHeader_1.00mm +PinHeader_2x10_P1.00mm_Vertical_SMD +surface-mounted straight pin header, 2x10, 1.00mm pitch, double rows +Surface mounted pin header SMD 2x10 1.00mm double row +0 +20 +20 +Connector_PinHeader_1.00mm +PinHeader_2x11_P1.00mm_Horizontal +Through hole angled pin header, 2x11, 1.00mm pitch, 2.0mm pin length, double rows +Through hole angled pin header THT 2x11 1.00mm double row +0 +22 +22 +Connector_PinHeader_1.00mm +PinHeader_2x11_P1.00mm_Vertical +Through hole straight pin header, 2x11, 1.00mm pitch, double rows +Through hole pin header THT 2x11 1.00mm double row +0 +22 +22 +Connector_PinHeader_1.00mm +PinHeader_2x11_P1.00mm_Vertical_SMD +surface-mounted straight pin header, 2x11, 1.00mm pitch, double rows +Surface mounted pin header SMD 2x11 1.00mm double row +0 +22 +22 +Connector_PinHeader_1.00mm +PinHeader_2x12_P1.00mm_Horizontal +Through hole angled pin header, 2x12, 1.00mm pitch, 2.0mm pin length, double rows +Through hole angled pin header THT 2x12 1.00mm double row +0 +24 +24 +Connector_PinHeader_1.00mm +PinHeader_2x12_P1.00mm_Vertical +Through hole straight pin header, 2x12, 1.00mm pitch, double rows +Through hole pin header THT 2x12 1.00mm double row +0 +24 +24 +Connector_PinHeader_1.00mm +PinHeader_2x12_P1.00mm_Vertical_SMD +surface-mounted straight pin header, 2x12, 1.00mm pitch, double rows +Surface mounted pin header SMD 2x12 1.00mm double row +0 +24 +24 +Connector_PinHeader_1.00mm +PinHeader_2x13_P1.00mm_Horizontal +Through hole angled pin header, 2x13, 1.00mm pitch, 2.0mm pin length, double rows +Through hole angled pin header THT 2x13 1.00mm double row +0 +26 +26 +Connector_PinHeader_1.00mm +PinHeader_2x13_P1.00mm_Vertical +Through hole straight pin header, 2x13, 1.00mm pitch, double rows +Through hole pin header THT 2x13 1.00mm double row +0 +26 +26 +Connector_PinHeader_1.00mm +PinHeader_2x13_P1.00mm_Vertical_SMD +surface-mounted straight pin header, 2x13, 1.00mm pitch, double rows +Surface mounted pin header SMD 2x13 1.00mm double row +0 +26 +26 +Connector_PinHeader_1.00mm +PinHeader_2x14_P1.00mm_Horizontal +Through hole angled pin header, 2x14, 1.00mm pitch, 2.0mm pin length, double rows +Through hole angled pin header THT 2x14 1.00mm double row +0 +28 +28 +Connector_PinHeader_1.00mm +PinHeader_2x14_P1.00mm_Vertical +Through hole straight pin header, 2x14, 1.00mm pitch, double rows +Through hole pin header THT 2x14 1.00mm double row +0 +28 +28 +Connector_PinHeader_1.00mm +PinHeader_2x14_P1.00mm_Vertical_SMD +surface-mounted straight pin header, 2x14, 1.00mm pitch, double rows +Surface mounted pin header SMD 2x14 1.00mm double row +0 +28 +28 +Connector_PinHeader_1.00mm +PinHeader_2x15_P1.00mm_Horizontal +Through hole angled pin header, 2x15, 1.00mm pitch, 2.0mm pin length, double rows +Through hole angled pin header THT 2x15 1.00mm double row +0 +30 +30 +Connector_PinHeader_1.00mm +PinHeader_2x15_P1.00mm_Vertical +Through hole straight pin header, 2x15, 1.00mm pitch, double rows +Through hole pin header THT 2x15 1.00mm double row +0 +30 +30 +Connector_PinHeader_1.00mm +PinHeader_2x15_P1.00mm_Vertical_SMD +surface-mounted straight pin header, 2x15, 1.00mm pitch, double rows +Surface mounted pin header SMD 2x15 1.00mm double row +0 +30 +30 +Connector_PinHeader_1.00mm +PinHeader_2x16_P1.00mm_Horizontal +Through hole angled pin header, 2x16, 1.00mm pitch, 2.0mm pin length, double rows +Through hole angled pin header THT 2x16 1.00mm double row +0 +32 +32 +Connector_PinHeader_1.00mm +PinHeader_2x16_P1.00mm_Vertical +Through hole straight pin header, 2x16, 1.00mm pitch, double rows +Through hole pin header THT 2x16 1.00mm double row +0 +32 +32 +Connector_PinHeader_1.00mm +PinHeader_2x16_P1.00mm_Vertical_SMD +surface-mounted straight pin header, 2x16, 1.00mm pitch, double rows +Surface mounted pin header SMD 2x16 1.00mm double row +0 +32 +32 +Connector_PinHeader_1.00mm +PinHeader_2x17_P1.00mm_Horizontal +Through hole angled pin header, 2x17, 1.00mm pitch, 2.0mm pin length, double rows +Through hole angled pin header THT 2x17 1.00mm double row +0 +34 +34 +Connector_PinHeader_1.00mm +PinHeader_2x17_P1.00mm_Vertical +Through hole straight pin header, 2x17, 1.00mm pitch, double rows +Through hole pin header THT 2x17 1.00mm double row +0 +34 +34 +Connector_PinHeader_1.00mm +PinHeader_2x17_P1.00mm_Vertical_SMD +surface-mounted straight pin header, 2x17, 1.00mm pitch, double rows +Surface mounted pin header SMD 2x17 1.00mm double row +0 +34 +34 +Connector_PinHeader_1.00mm +PinHeader_2x18_P1.00mm_Horizontal +Through hole angled pin header, 2x18, 1.00mm pitch, 2.0mm pin length, double rows +Through hole angled pin header THT 2x18 1.00mm double row +0 +36 +36 +Connector_PinHeader_1.00mm +PinHeader_2x18_P1.00mm_Vertical +Through hole straight pin header, 2x18, 1.00mm pitch, double rows +Through hole pin header THT 2x18 1.00mm double row +0 +36 +36 +Connector_PinHeader_1.00mm +PinHeader_2x18_P1.00mm_Vertical_SMD +surface-mounted straight pin header, 2x18, 1.00mm pitch, double rows +Surface mounted pin header SMD 2x18 1.00mm double row +0 +36 +36 +Connector_PinHeader_1.00mm +PinHeader_2x19_P1.00mm_Horizontal +Through hole angled pin header, 2x19, 1.00mm pitch, 2.0mm pin length, double rows +Through hole angled pin header THT 2x19 1.00mm double row +0 +38 +38 +Connector_PinHeader_1.00mm +PinHeader_2x19_P1.00mm_Vertical +Through hole straight pin header, 2x19, 1.00mm pitch, double rows +Through hole pin header THT 2x19 1.00mm double row +0 +38 +38 +Connector_PinHeader_1.00mm +PinHeader_2x19_P1.00mm_Vertical_SMD +surface-mounted straight pin header, 2x19, 1.00mm pitch, double rows +Surface mounted pin header SMD 2x19 1.00mm double row +0 +38 +38 +Connector_PinHeader_1.00mm +PinHeader_2x20_P1.00mm_Horizontal +Through hole angled pin header, 2x20, 1.00mm pitch, 2.0mm pin length, double rows +Through hole angled pin header THT 2x20 1.00mm double row +0 +40 +40 +Connector_PinHeader_1.00mm +PinHeader_2x20_P1.00mm_Vertical +Through hole straight pin header, 2x20, 1.00mm pitch, double rows +Through hole pin header THT 2x20 1.00mm double row +0 +40 +40 +Connector_PinHeader_1.00mm +PinHeader_2x20_P1.00mm_Vertical_SMD +surface-mounted straight pin header, 2x20, 1.00mm pitch, double rows +Surface mounted pin header SMD 2x20 1.00mm double row +0 +40 +40 +Connector_PinHeader_1.00mm +PinHeader_2x21_P1.00mm_Horizontal +Through hole angled pin header, 2x21, 1.00mm pitch, 2.0mm pin length, double rows +Through hole angled pin header THT 2x21 1.00mm double row +0 +42 +42 +Connector_PinHeader_1.00mm +PinHeader_2x21_P1.00mm_Vertical +Through hole straight pin header, 2x21, 1.00mm pitch, double rows +Through hole pin header THT 2x21 1.00mm double row +0 +42 +42 +Connector_PinHeader_1.00mm +PinHeader_2x21_P1.00mm_Vertical_SMD +surface-mounted straight pin header, 2x21, 1.00mm pitch, double rows +Surface mounted pin header SMD 2x21 1.00mm double row +0 +42 +42 +Connector_PinHeader_1.00mm +PinHeader_2x22_P1.00mm_Horizontal +Through hole angled pin header, 2x22, 1.00mm pitch, 2.0mm pin length, double rows +Through hole angled pin header THT 2x22 1.00mm double row +0 +44 +44 +Connector_PinHeader_1.00mm +PinHeader_2x22_P1.00mm_Vertical +Through hole straight pin header, 2x22, 1.00mm pitch, double rows +Through hole pin header THT 2x22 1.00mm double row +0 +44 +44 +Connector_PinHeader_1.00mm +PinHeader_2x22_P1.00mm_Vertical_SMD +surface-mounted straight pin header, 2x22, 1.00mm pitch, double rows +Surface mounted pin header SMD 2x22 1.00mm double row +0 +44 +44 +Connector_PinHeader_1.00mm +PinHeader_2x23_P1.00mm_Horizontal +Through hole angled pin header, 2x23, 1.00mm pitch, 2.0mm pin length, double rows +Through hole angled pin header THT 2x23 1.00mm double row +0 +46 +46 +Connector_PinHeader_1.00mm +PinHeader_2x23_P1.00mm_Vertical +Through hole straight pin header, 2x23, 1.00mm pitch, double rows +Through hole pin header THT 2x23 1.00mm double row +0 +46 +46 +Connector_PinHeader_1.00mm +PinHeader_2x23_P1.00mm_Vertical_SMD +surface-mounted straight pin header, 2x23, 1.00mm pitch, double rows +Surface mounted pin header SMD 2x23 1.00mm double row +0 +46 +46 +Connector_PinHeader_1.00mm +PinHeader_2x24_P1.00mm_Horizontal +Through hole angled pin header, 2x24, 1.00mm pitch, 2.0mm pin length, double rows +Through hole angled pin header THT 2x24 1.00mm double row +0 +48 +48 +Connector_PinHeader_1.00mm +PinHeader_2x24_P1.00mm_Vertical +Through hole straight pin header, 2x24, 1.00mm pitch, double rows +Through hole pin header THT 2x24 1.00mm double row +0 +48 +48 +Connector_PinHeader_1.00mm +PinHeader_2x24_P1.00mm_Vertical_SMD +surface-mounted straight pin header, 2x24, 1.00mm pitch, double rows +Surface mounted pin header SMD 2x24 1.00mm double row +0 +48 +48 +Connector_PinHeader_1.00mm +PinHeader_2x25_P1.00mm_Horizontal +Through hole angled pin header, 2x25, 1.00mm pitch, 2.0mm pin length, double rows +Through hole angled pin header THT 2x25 1.00mm double row +0 +50 +50 +Connector_PinHeader_1.00mm +PinHeader_2x25_P1.00mm_Vertical +Through hole straight pin header, 2x25, 1.00mm pitch, double rows +Through hole pin header THT 2x25 1.00mm double row +0 +50 +50 +Connector_PinHeader_1.00mm +PinHeader_2x25_P1.00mm_Vertical_SMD +surface-mounted straight pin header, 2x25, 1.00mm pitch, double rows +Surface mounted pin header SMD 2x25 1.00mm double row +0 +50 +50 +Connector_PinHeader_1.00mm +PinHeader_2x26_P1.00mm_Horizontal +Through hole angled pin header, 2x26, 1.00mm pitch, 2.0mm pin length, double rows +Through hole angled pin header THT 2x26 1.00mm double row +0 +52 +52 +Connector_PinHeader_1.00mm +PinHeader_2x26_P1.00mm_Vertical +Through hole straight pin header, 2x26, 1.00mm pitch, double rows +Through hole pin header THT 2x26 1.00mm double row +0 +52 +52 +Connector_PinHeader_1.00mm +PinHeader_2x26_P1.00mm_Vertical_SMD +surface-mounted straight pin header, 2x26, 1.00mm pitch, double rows +Surface mounted pin header SMD 2x26 1.00mm double row +0 +52 +52 +Connector_PinHeader_1.00mm +PinHeader_2x27_P1.00mm_Horizontal +Through hole angled pin header, 2x27, 1.00mm pitch, 2.0mm pin length, double rows +Through hole angled pin header THT 2x27 1.00mm double row +0 +54 +54 +Connector_PinHeader_1.00mm +PinHeader_2x27_P1.00mm_Vertical +Through hole straight pin header, 2x27, 1.00mm pitch, double rows +Through hole pin header THT 2x27 1.00mm double row +0 +54 +54 +Connector_PinHeader_1.00mm +PinHeader_2x27_P1.00mm_Vertical_SMD +surface-mounted straight pin header, 2x27, 1.00mm pitch, double rows +Surface mounted pin header SMD 2x27 1.00mm double row +0 +54 +54 +Connector_PinHeader_1.00mm +PinHeader_2x28_P1.00mm_Horizontal +Through hole angled pin header, 2x28, 1.00mm pitch, 2.0mm pin length, double rows +Through hole angled pin header THT 2x28 1.00mm double row +0 +56 +56 +Connector_PinHeader_1.00mm +PinHeader_2x28_P1.00mm_Vertical +Through hole straight pin header, 2x28, 1.00mm pitch, double rows +Through hole pin header THT 2x28 1.00mm double row +0 +56 +56 +Connector_PinHeader_1.00mm +PinHeader_2x28_P1.00mm_Vertical_SMD +surface-mounted straight pin header, 2x28, 1.00mm pitch, double rows +Surface mounted pin header SMD 2x28 1.00mm double row +0 +56 +56 +Connector_PinHeader_1.00mm +PinHeader_2x29_P1.00mm_Horizontal +Through hole angled pin header, 2x29, 1.00mm pitch, 2.0mm pin length, double rows +Through hole angled pin header THT 2x29 1.00mm double row +0 +58 +58 +Connector_PinHeader_1.00mm +PinHeader_2x29_P1.00mm_Vertical +Through hole straight pin header, 2x29, 1.00mm pitch, double rows +Through hole pin header THT 2x29 1.00mm double row +0 +58 +58 +Connector_PinHeader_1.00mm +PinHeader_2x29_P1.00mm_Vertical_SMD +surface-mounted straight pin header, 2x29, 1.00mm pitch, double rows +Surface mounted pin header SMD 2x29 1.00mm double row +0 +58 +58 +Connector_PinHeader_1.00mm +PinHeader_2x30_P1.00mm_Horizontal +Through hole angled pin header, 2x30, 1.00mm pitch, 2.0mm pin length, double rows +Through hole angled pin header THT 2x30 1.00mm double row +0 +60 +60 +Connector_PinHeader_1.00mm +PinHeader_2x30_P1.00mm_Vertical +Through hole straight pin header, 2x30, 1.00mm pitch, double rows +Through hole pin header THT 2x30 1.00mm double row +0 +60 +60 +Connector_PinHeader_1.00mm +PinHeader_2x30_P1.00mm_Vertical_SMD +surface-mounted straight pin header, 2x30, 1.00mm pitch, double rows +Surface mounted pin header SMD 2x30 1.00mm double row +0 +60 +60 +Connector_PinHeader_1.00mm +PinHeader_2x31_P1.00mm_Horizontal +Through hole angled pin header, 2x31, 1.00mm pitch, 2.0mm pin length, double rows +Through hole angled pin header THT 2x31 1.00mm double row +0 +62 +62 +Connector_PinHeader_1.00mm +PinHeader_2x31_P1.00mm_Vertical +Through hole straight pin header, 2x31, 1.00mm pitch, double rows +Through hole pin header THT 2x31 1.00mm double row +0 +62 +62 +Connector_PinHeader_1.00mm +PinHeader_2x31_P1.00mm_Vertical_SMD +surface-mounted straight pin header, 2x31, 1.00mm pitch, double rows +Surface mounted pin header SMD 2x31 1.00mm double row +0 +62 +62 +Connector_PinHeader_1.00mm +PinHeader_2x32_P1.00mm_Horizontal +Through hole angled pin header, 2x32, 1.00mm pitch, 2.0mm pin length, double rows +Through hole angled pin header THT 2x32 1.00mm double row +0 +64 +64 +Connector_PinHeader_1.00mm +PinHeader_2x32_P1.00mm_Vertical +Through hole straight pin header, 2x32, 1.00mm pitch, double rows +Through hole pin header THT 2x32 1.00mm double row +0 +64 +64 +Connector_PinHeader_1.00mm +PinHeader_2x32_P1.00mm_Vertical_SMD +surface-mounted straight pin header, 2x32, 1.00mm pitch, double rows +Surface mounted pin header SMD 2x32 1.00mm double row +0 +64 +64 +Connector_PinHeader_1.00mm +PinHeader_2x33_P1.00mm_Horizontal +Through hole angled pin header, 2x33, 1.00mm pitch, 2.0mm pin length, double rows +Through hole angled pin header THT 2x33 1.00mm double row +0 +66 +66 +Connector_PinHeader_1.00mm +PinHeader_2x33_P1.00mm_Vertical +Through hole straight pin header, 2x33, 1.00mm pitch, double rows +Through hole pin header THT 2x33 1.00mm double row +0 +66 +66 +Connector_PinHeader_1.00mm +PinHeader_2x33_P1.00mm_Vertical_SMD +surface-mounted straight pin header, 2x33, 1.00mm pitch, double rows +Surface mounted pin header SMD 2x33 1.00mm double row +0 +66 +66 +Connector_PinHeader_1.00mm +PinHeader_2x34_P1.00mm_Horizontal +Through hole angled pin header, 2x34, 1.00mm pitch, 2.0mm pin length, double rows +Through hole angled pin header THT 2x34 1.00mm double row +0 +68 +68 +Connector_PinHeader_1.00mm +PinHeader_2x34_P1.00mm_Vertical +Through hole straight pin header, 2x34, 1.00mm pitch, double rows +Through hole pin header THT 2x34 1.00mm double row +0 +68 +68 +Connector_PinHeader_1.00mm +PinHeader_2x34_P1.00mm_Vertical_SMD +surface-mounted straight pin header, 2x34, 1.00mm pitch, double rows +Surface mounted pin header SMD 2x34 1.00mm double row +0 +68 +68 +Connector_PinHeader_1.00mm +PinHeader_2x35_P1.00mm_Horizontal +Through hole angled pin header, 2x35, 1.00mm pitch, 2.0mm pin length, double rows +Through hole angled pin header THT 2x35 1.00mm double row +0 +70 +70 +Connector_PinHeader_1.00mm +PinHeader_2x35_P1.00mm_Vertical +Through hole straight pin header, 2x35, 1.00mm pitch, double rows +Through hole pin header THT 2x35 1.00mm double row +0 +70 +70 +Connector_PinHeader_1.00mm +PinHeader_2x35_P1.00mm_Vertical_SMD +surface-mounted straight pin header, 2x35, 1.00mm pitch, double rows +Surface mounted pin header SMD 2x35 1.00mm double row +0 +70 +70 +Connector_PinHeader_1.00mm +PinHeader_2x36_P1.00mm_Horizontal +Through hole angled pin header, 2x36, 1.00mm pitch, 2.0mm pin length, double rows +Through hole angled pin header THT 2x36 1.00mm double row +0 +72 +72 +Connector_PinHeader_1.00mm +PinHeader_2x36_P1.00mm_Vertical +Through hole straight pin header, 2x36, 1.00mm pitch, double rows +Through hole pin header THT 2x36 1.00mm double row +0 +72 +72 +Connector_PinHeader_1.00mm +PinHeader_2x36_P1.00mm_Vertical_SMD +surface-mounted straight pin header, 2x36, 1.00mm pitch, double rows +Surface mounted pin header SMD 2x36 1.00mm double row +0 +72 +72 +Connector_PinHeader_1.00mm +PinHeader_2x37_P1.00mm_Horizontal +Through hole angled pin header, 2x37, 1.00mm pitch, 2.0mm pin length, double rows +Through hole angled pin header THT 2x37 1.00mm double row +0 +74 +74 +Connector_PinHeader_1.00mm +PinHeader_2x37_P1.00mm_Vertical +Through hole straight pin header, 2x37, 1.00mm pitch, double rows +Through hole pin header THT 2x37 1.00mm double row +0 +74 +74 +Connector_PinHeader_1.00mm +PinHeader_2x37_P1.00mm_Vertical_SMD +surface-mounted straight pin header, 2x37, 1.00mm pitch, double rows +Surface mounted pin header SMD 2x37 1.00mm double row +0 +74 +74 +Connector_PinHeader_1.00mm +PinHeader_2x38_P1.00mm_Horizontal +Through hole angled pin header, 2x38, 1.00mm pitch, 2.0mm pin length, double rows +Through hole angled pin header THT 2x38 1.00mm double row +0 +76 +76 +Connector_PinHeader_1.00mm +PinHeader_2x38_P1.00mm_Vertical +Through hole straight pin header, 2x38, 1.00mm pitch, double rows +Through hole pin header THT 2x38 1.00mm double row +0 +76 +76 +Connector_PinHeader_1.00mm +PinHeader_2x38_P1.00mm_Vertical_SMD +surface-mounted straight pin header, 2x38, 1.00mm pitch, double rows +Surface mounted pin header SMD 2x38 1.00mm double row +0 +76 +76 +Connector_PinHeader_1.00mm +PinHeader_2x39_P1.00mm_Horizontal +Through hole angled pin header, 2x39, 1.00mm pitch, 2.0mm pin length, double rows +Through hole angled pin header THT 2x39 1.00mm double row +0 +78 +78 +Connector_PinHeader_1.00mm +PinHeader_2x39_P1.00mm_Vertical +Through hole straight pin header, 2x39, 1.00mm pitch, double rows +Through hole pin header THT 2x39 1.00mm double row +0 +78 +78 +Connector_PinHeader_1.00mm +PinHeader_2x39_P1.00mm_Vertical_SMD +surface-mounted straight pin header, 2x39, 1.00mm pitch, double rows +Surface mounted pin header SMD 2x39 1.00mm double row +0 +78 +78 +Connector_PinHeader_1.00mm +PinHeader_2x40_P1.00mm_Horizontal +Through hole angled pin header, 2x40, 1.00mm pitch, 2.0mm pin length, double rows +Through hole angled pin header THT 2x40 1.00mm double row +0 +80 +80 +Connector_PinHeader_1.00mm +PinHeader_2x40_P1.00mm_Vertical +Through hole straight pin header, 2x40, 1.00mm pitch, double rows +Through hole pin header THT 2x40 1.00mm double row +0 +80 +80 +Connector_PinHeader_1.00mm +PinHeader_2x40_P1.00mm_Vertical_SMD +surface-mounted straight pin header, 2x40, 1.00mm pitch, double rows +Surface mounted pin header SMD 2x40 1.00mm double row +0 +80 +80 +Connector_PinHeader_1.27mm +PinHeader_1x01_P1.27mm_Horizontal +Through hole angled pin header, 1x01, 1.27mm pitch, 4.0mm pin length, single row +Through hole angled pin header THT 1x01 1.27mm single row +0 +1 +1 +Connector_PinHeader_1.27mm +PinHeader_1x01_P1.27mm_Vertical +Through hole straight pin header, 1x01, 1.27mm pitch, single row +Through hole pin header THT 1x01 1.27mm single row +0 +1 +1 +Connector_PinHeader_1.27mm +PinHeader_1x02_P1.27mm_Horizontal +Through hole angled pin header, 1x02, 1.27mm pitch, 4.0mm pin length, single row +Through hole angled pin header THT 1x02 1.27mm single row +0 +2 +2 +Connector_PinHeader_1.27mm +PinHeader_1x02_P1.27mm_Vertical +Through hole straight pin header, 1x02, 1.27mm pitch, single row +Through hole pin header THT 1x02 1.27mm single row +0 +2 +2 +Connector_PinHeader_1.27mm +PinHeader_1x02_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x02, 1.27mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x02 1.27mm single row style1 pin1 left +0 +2 +2 +Connector_PinHeader_1.27mm +PinHeader_1x02_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x02, 1.27mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x02 1.27mm single row style2 pin1 right +0 +2 +2 +Connector_PinHeader_1.27mm +PinHeader_1x03_P1.27mm_Horizontal +Through hole angled pin header, 1x03, 1.27mm pitch, 4.0mm pin length, single row +Through hole angled pin header THT 1x03 1.27mm single row +0 +3 +3 +Connector_PinHeader_1.27mm +PinHeader_1x03_P1.27mm_Vertical +Through hole straight pin header, 1x03, 1.27mm pitch, single row +Through hole pin header THT 1x03 1.27mm single row +0 +3 +3 +Connector_PinHeader_1.27mm +PinHeader_1x03_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x03, 1.27mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x03 1.27mm single row style1 pin1 left +0 +3 +3 +Connector_PinHeader_1.27mm +PinHeader_1x03_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x03, 1.27mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x03 1.27mm single row style2 pin1 right +0 +3 +3 +Connector_PinHeader_1.27mm +PinHeader_1x04_P1.27mm_Horizontal +Through hole angled pin header, 1x04, 1.27mm pitch, 4.0mm pin length, single row +Through hole angled pin header THT 1x04 1.27mm single row +0 +4 +4 +Connector_PinHeader_1.27mm +PinHeader_1x04_P1.27mm_Vertical +Through hole straight pin header, 1x04, 1.27mm pitch, single row +Through hole pin header THT 1x04 1.27mm single row +0 +4 +4 +Connector_PinHeader_1.27mm +PinHeader_1x04_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x04, 1.27mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x04 1.27mm single row style1 pin1 left +0 +4 +4 +Connector_PinHeader_1.27mm +PinHeader_1x04_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x04, 1.27mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x04 1.27mm single row style2 pin1 right +0 +4 +4 +Connector_PinHeader_1.27mm +PinHeader_1x05_P1.27mm_Horizontal +Through hole angled pin header, 1x05, 1.27mm pitch, 4.0mm pin length, single row +Through hole angled pin header THT 1x05 1.27mm single row +0 +5 +5 +Connector_PinHeader_1.27mm +PinHeader_1x05_P1.27mm_Vertical +Through hole straight pin header, 1x05, 1.27mm pitch, single row +Through hole pin header THT 1x05 1.27mm single row +0 +5 +5 +Connector_PinHeader_1.27mm +PinHeader_1x05_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x05, 1.27mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x05 1.27mm single row style1 pin1 left +0 +5 +5 +Connector_PinHeader_1.27mm +PinHeader_1x05_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x05, 1.27mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x05 1.27mm single row style2 pin1 right +0 +5 +5 +Connector_PinHeader_1.27mm +PinHeader_1x06_P1.27mm_Horizontal +Through hole angled pin header, 1x06, 1.27mm pitch, 4.0mm pin length, single row +Through hole angled pin header THT 1x06 1.27mm single row +0 +6 +6 +Connector_PinHeader_1.27mm +PinHeader_1x06_P1.27mm_Vertical +Through hole straight pin header, 1x06, 1.27mm pitch, single row +Through hole pin header THT 1x06 1.27mm single row +0 +6 +6 +Connector_PinHeader_1.27mm +PinHeader_1x06_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x06, 1.27mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x06 1.27mm single row style1 pin1 left +0 +6 +6 +Connector_PinHeader_1.27mm +PinHeader_1x06_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x06, 1.27mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x06 1.27mm single row style2 pin1 right +0 +6 +6 +Connector_PinHeader_1.27mm +PinHeader_1x07_P1.27mm_Horizontal +Through hole angled pin header, 1x07, 1.27mm pitch, 4.0mm pin length, single row +Through hole angled pin header THT 1x07 1.27mm single row +0 +7 +7 +Connector_PinHeader_1.27mm +PinHeader_1x07_P1.27mm_Vertical +Through hole straight pin header, 1x07, 1.27mm pitch, single row +Through hole pin header THT 1x07 1.27mm single row +0 +7 +7 +Connector_PinHeader_1.27mm +PinHeader_1x07_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x07, 1.27mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x07 1.27mm single row style1 pin1 left +0 +7 +7 +Connector_PinHeader_1.27mm +PinHeader_1x07_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x07, 1.27mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x07 1.27mm single row style2 pin1 right +0 +7 +7 +Connector_PinHeader_1.27mm +PinHeader_1x08_P1.27mm_Horizontal +Through hole angled pin header, 1x08, 1.27mm pitch, 4.0mm pin length, single row +Through hole angled pin header THT 1x08 1.27mm single row +0 +8 +8 +Connector_PinHeader_1.27mm +PinHeader_1x08_P1.27mm_Vertical +Through hole straight pin header, 1x08, 1.27mm pitch, single row +Through hole pin header THT 1x08 1.27mm single row +0 +8 +8 +Connector_PinHeader_1.27mm +PinHeader_1x08_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x08, 1.27mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x08 1.27mm single row style1 pin1 left +0 +8 +8 +Connector_PinHeader_1.27mm +PinHeader_1x08_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x08, 1.27mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x08 1.27mm single row style2 pin1 right +0 +8 +8 +Connector_PinHeader_1.27mm +PinHeader_1x09_P1.27mm_Horizontal +Through hole angled pin header, 1x09, 1.27mm pitch, 4.0mm pin length, single row +Through hole angled pin header THT 1x09 1.27mm single row +0 +9 +9 +Connector_PinHeader_1.27mm +PinHeader_1x09_P1.27mm_Vertical +Through hole straight pin header, 1x09, 1.27mm pitch, single row +Through hole pin header THT 1x09 1.27mm single row +0 +9 +9 +Connector_PinHeader_1.27mm +PinHeader_1x09_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x09, 1.27mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x09 1.27mm single row style1 pin1 left +0 +9 +9 +Connector_PinHeader_1.27mm +PinHeader_1x09_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x09, 1.27mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x09 1.27mm single row style2 pin1 right +0 +9 +9 +Connector_PinHeader_1.27mm +PinHeader_1x10_P1.27mm_Horizontal +Through hole angled pin header, 1x10, 1.27mm pitch, 4.0mm pin length, single row +Through hole angled pin header THT 1x10 1.27mm single row +0 +10 +10 +Connector_PinHeader_1.27mm +PinHeader_1x10_P1.27mm_Vertical +Through hole straight pin header, 1x10, 1.27mm pitch, single row +Through hole pin header THT 1x10 1.27mm single row +0 +10 +10 +Connector_PinHeader_1.27mm +PinHeader_1x10_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x10, 1.27mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x10 1.27mm single row style1 pin1 left +0 +10 +10 +Connector_PinHeader_1.27mm +PinHeader_1x10_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x10, 1.27mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x10 1.27mm single row style2 pin1 right +0 +10 +10 +Connector_PinHeader_1.27mm +PinHeader_1x11_P1.27mm_Horizontal +Through hole angled pin header, 1x11, 1.27mm pitch, 4.0mm pin length, single row +Through hole angled pin header THT 1x11 1.27mm single row +0 +11 +11 +Connector_PinHeader_1.27mm +PinHeader_1x11_P1.27mm_Vertical +Through hole straight pin header, 1x11, 1.27mm pitch, single row +Through hole pin header THT 1x11 1.27mm single row +0 +11 +11 +Connector_PinHeader_1.27mm +PinHeader_1x11_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x11, 1.27mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x11 1.27mm single row style1 pin1 left +0 +11 +11 +Connector_PinHeader_1.27mm +PinHeader_1x11_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x11, 1.27mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x11 1.27mm single row style2 pin1 right +0 +11 +11 +Connector_PinHeader_1.27mm +PinHeader_1x12_P1.27mm_Horizontal +Through hole angled pin header, 1x12, 1.27mm pitch, 4.0mm pin length, single row +Through hole angled pin header THT 1x12 1.27mm single row +0 +12 +12 +Connector_PinHeader_1.27mm +PinHeader_1x12_P1.27mm_Vertical +Through hole straight pin header, 1x12, 1.27mm pitch, single row +Through hole pin header THT 1x12 1.27mm single row +0 +12 +12 +Connector_PinHeader_1.27mm +PinHeader_1x12_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x12, 1.27mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x12 1.27mm single row style1 pin1 left +0 +12 +12 +Connector_PinHeader_1.27mm +PinHeader_1x12_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x12, 1.27mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x12 1.27mm single row style2 pin1 right +0 +12 +12 +Connector_PinHeader_1.27mm +PinHeader_1x13_P1.27mm_Horizontal +Through hole angled pin header, 1x13, 1.27mm pitch, 4.0mm pin length, single row +Through hole angled pin header THT 1x13 1.27mm single row +0 +13 +13 +Connector_PinHeader_1.27mm +PinHeader_1x13_P1.27mm_Vertical +Through hole straight pin header, 1x13, 1.27mm pitch, single row +Through hole pin header THT 1x13 1.27mm single row +0 +13 +13 +Connector_PinHeader_1.27mm +PinHeader_1x13_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x13, 1.27mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x13 1.27mm single row style1 pin1 left +0 +13 +13 +Connector_PinHeader_1.27mm +PinHeader_1x13_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x13, 1.27mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x13 1.27mm single row style2 pin1 right +0 +13 +13 +Connector_PinHeader_1.27mm +PinHeader_1x14_P1.27mm_Horizontal +Through hole angled pin header, 1x14, 1.27mm pitch, 4.0mm pin length, single row +Through hole angled pin header THT 1x14 1.27mm single row +0 +14 +14 +Connector_PinHeader_1.27mm +PinHeader_1x14_P1.27mm_Vertical +Through hole straight pin header, 1x14, 1.27mm pitch, single row +Through hole pin header THT 1x14 1.27mm single row +0 +14 +14 +Connector_PinHeader_1.27mm +PinHeader_1x14_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x14, 1.27mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x14 1.27mm single row style1 pin1 left +0 +14 +14 +Connector_PinHeader_1.27mm +PinHeader_1x14_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x14, 1.27mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x14 1.27mm single row style2 pin1 right +0 +14 +14 +Connector_PinHeader_1.27mm +PinHeader_1x15_P1.27mm_Horizontal +Through hole angled pin header, 1x15, 1.27mm pitch, 4.0mm pin length, single row +Through hole angled pin header THT 1x15 1.27mm single row +0 +15 +15 +Connector_PinHeader_1.27mm +PinHeader_1x15_P1.27mm_Vertical +Through hole straight pin header, 1x15, 1.27mm pitch, single row +Through hole pin header THT 1x15 1.27mm single row +0 +15 +15 +Connector_PinHeader_1.27mm +PinHeader_1x15_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x15, 1.27mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x15 1.27mm single row style1 pin1 left +0 +15 +15 +Connector_PinHeader_1.27mm +PinHeader_1x15_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x15, 1.27mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x15 1.27mm single row style2 pin1 right +0 +15 +15 +Connector_PinHeader_1.27mm +PinHeader_1x16_P1.27mm_Horizontal +Through hole angled pin header, 1x16, 1.27mm pitch, 4.0mm pin length, single row +Through hole angled pin header THT 1x16 1.27mm single row +0 +16 +16 +Connector_PinHeader_1.27mm +PinHeader_1x16_P1.27mm_Vertical +Through hole straight pin header, 1x16, 1.27mm pitch, single row +Through hole pin header THT 1x16 1.27mm single row +0 +16 +16 +Connector_PinHeader_1.27mm +PinHeader_1x16_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x16, 1.27mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x16 1.27mm single row style1 pin1 left +0 +16 +16 +Connector_PinHeader_1.27mm +PinHeader_1x16_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x16, 1.27mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x16 1.27mm single row style2 pin1 right +0 +16 +16 +Connector_PinHeader_1.27mm +PinHeader_1x17_P1.27mm_Horizontal +Through hole angled pin header, 1x17, 1.27mm pitch, 4.0mm pin length, single row +Through hole angled pin header THT 1x17 1.27mm single row +0 +17 +17 +Connector_PinHeader_1.27mm +PinHeader_1x17_P1.27mm_Vertical +Through hole straight pin header, 1x17, 1.27mm pitch, single row +Through hole pin header THT 1x17 1.27mm single row +0 +17 +17 +Connector_PinHeader_1.27mm +PinHeader_1x17_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x17, 1.27mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x17 1.27mm single row style1 pin1 left +0 +17 +17 +Connector_PinHeader_1.27mm +PinHeader_1x17_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x17, 1.27mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x17 1.27mm single row style2 pin1 right +0 +17 +17 +Connector_PinHeader_1.27mm +PinHeader_1x18_P1.27mm_Horizontal +Through hole angled pin header, 1x18, 1.27mm pitch, 4.0mm pin length, single row +Through hole angled pin header THT 1x18 1.27mm single row +0 +18 +18 +Connector_PinHeader_1.27mm +PinHeader_1x18_P1.27mm_Vertical +Through hole straight pin header, 1x18, 1.27mm pitch, single row +Through hole pin header THT 1x18 1.27mm single row +0 +18 +18 +Connector_PinHeader_1.27mm +PinHeader_1x18_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x18, 1.27mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x18 1.27mm single row style1 pin1 left +0 +18 +18 +Connector_PinHeader_1.27mm +PinHeader_1x18_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x18, 1.27mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x18 1.27mm single row style2 pin1 right +0 +18 +18 +Connector_PinHeader_1.27mm +PinHeader_1x19_P1.27mm_Horizontal +Through hole angled pin header, 1x19, 1.27mm pitch, 4.0mm pin length, single row +Through hole angled pin header THT 1x19 1.27mm single row +0 +19 +19 +Connector_PinHeader_1.27mm +PinHeader_1x19_P1.27mm_Vertical +Through hole straight pin header, 1x19, 1.27mm pitch, single row +Through hole pin header THT 1x19 1.27mm single row +0 +19 +19 +Connector_PinHeader_1.27mm +PinHeader_1x19_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x19, 1.27mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x19 1.27mm single row style1 pin1 left +0 +19 +19 +Connector_PinHeader_1.27mm +PinHeader_1x19_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x19, 1.27mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x19 1.27mm single row style2 pin1 right +0 +19 +19 +Connector_PinHeader_1.27mm +PinHeader_1x20_P1.27mm_Horizontal +Through hole angled pin header, 1x20, 1.27mm pitch, 4.0mm pin length, single row +Through hole angled pin header THT 1x20 1.27mm single row +0 +20 +20 +Connector_PinHeader_1.27mm +PinHeader_1x20_P1.27mm_Vertical +Through hole straight pin header, 1x20, 1.27mm pitch, single row +Through hole pin header THT 1x20 1.27mm single row +0 +20 +20 +Connector_PinHeader_1.27mm +PinHeader_1x20_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x20, 1.27mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x20 1.27mm single row style1 pin1 left +0 +20 +20 +Connector_PinHeader_1.27mm +PinHeader_1x20_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x20, 1.27mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x20 1.27mm single row style2 pin1 right +0 +20 +20 +Connector_PinHeader_1.27mm +PinHeader_1x21_P1.27mm_Horizontal +Through hole angled pin header, 1x21, 1.27mm pitch, 4.0mm pin length, single row +Through hole angled pin header THT 1x21 1.27mm single row +0 +21 +21 +Connector_PinHeader_1.27mm +PinHeader_1x21_P1.27mm_Vertical +Through hole straight pin header, 1x21, 1.27mm pitch, single row +Through hole pin header THT 1x21 1.27mm single row +0 +21 +21 +Connector_PinHeader_1.27mm +PinHeader_1x21_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x21, 1.27mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x21 1.27mm single row style1 pin1 left +0 +21 +21 +Connector_PinHeader_1.27mm +PinHeader_1x21_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x21, 1.27mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x21 1.27mm single row style2 pin1 right +0 +21 +21 +Connector_PinHeader_1.27mm +PinHeader_1x22_P1.27mm_Horizontal +Through hole angled pin header, 1x22, 1.27mm pitch, 4.0mm pin length, single row +Through hole angled pin header THT 1x22 1.27mm single row +0 +22 +22 +Connector_PinHeader_1.27mm +PinHeader_1x22_P1.27mm_Vertical +Through hole straight pin header, 1x22, 1.27mm pitch, single row +Through hole pin header THT 1x22 1.27mm single row +0 +22 +22 +Connector_PinHeader_1.27mm +PinHeader_1x22_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x22, 1.27mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x22 1.27mm single row style1 pin1 left +0 +22 +22 +Connector_PinHeader_1.27mm +PinHeader_1x22_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x22, 1.27mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x22 1.27mm single row style2 pin1 right +0 +22 +22 +Connector_PinHeader_1.27mm +PinHeader_1x23_P1.27mm_Horizontal +Through hole angled pin header, 1x23, 1.27mm pitch, 4.0mm pin length, single row +Through hole angled pin header THT 1x23 1.27mm single row +0 +23 +23 +Connector_PinHeader_1.27mm +PinHeader_1x23_P1.27mm_Vertical +Through hole straight pin header, 1x23, 1.27mm pitch, single row +Through hole pin header THT 1x23 1.27mm single row +0 +23 +23 +Connector_PinHeader_1.27mm +PinHeader_1x23_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x23, 1.27mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x23 1.27mm single row style1 pin1 left +0 +23 +23 +Connector_PinHeader_1.27mm +PinHeader_1x23_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x23, 1.27mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x23 1.27mm single row style2 pin1 right +0 +23 +23 +Connector_PinHeader_1.27mm +PinHeader_1x24_P1.27mm_Horizontal +Through hole angled pin header, 1x24, 1.27mm pitch, 4.0mm pin length, single row +Through hole angled pin header THT 1x24 1.27mm single row +0 +24 +24 +Connector_PinHeader_1.27mm +PinHeader_1x24_P1.27mm_Vertical +Through hole straight pin header, 1x24, 1.27mm pitch, single row +Through hole pin header THT 1x24 1.27mm single row +0 +24 +24 +Connector_PinHeader_1.27mm +PinHeader_1x24_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x24, 1.27mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x24 1.27mm single row style1 pin1 left +0 +24 +24 +Connector_PinHeader_1.27mm +PinHeader_1x24_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x24, 1.27mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x24 1.27mm single row style2 pin1 right +0 +24 +24 +Connector_PinHeader_1.27mm +PinHeader_1x25_P1.27mm_Horizontal +Through hole angled pin header, 1x25, 1.27mm pitch, 4.0mm pin length, single row +Through hole angled pin header THT 1x25 1.27mm single row +0 +25 +25 +Connector_PinHeader_1.27mm +PinHeader_1x25_P1.27mm_Vertical +Through hole straight pin header, 1x25, 1.27mm pitch, single row +Through hole pin header THT 1x25 1.27mm single row +0 +25 +25 +Connector_PinHeader_1.27mm +PinHeader_1x25_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x25, 1.27mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x25 1.27mm single row style1 pin1 left +0 +25 +25 +Connector_PinHeader_1.27mm +PinHeader_1x25_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x25, 1.27mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x25 1.27mm single row style2 pin1 right +0 +25 +25 +Connector_PinHeader_1.27mm +PinHeader_1x26_P1.27mm_Horizontal +Through hole angled pin header, 1x26, 1.27mm pitch, 4.0mm pin length, single row +Through hole angled pin header THT 1x26 1.27mm single row +0 +26 +26 +Connector_PinHeader_1.27mm +PinHeader_1x26_P1.27mm_Vertical +Through hole straight pin header, 1x26, 1.27mm pitch, single row +Through hole pin header THT 1x26 1.27mm single row +0 +26 +26 +Connector_PinHeader_1.27mm +PinHeader_1x26_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x26, 1.27mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x26 1.27mm single row style1 pin1 left +0 +26 +26 +Connector_PinHeader_1.27mm +PinHeader_1x26_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x26, 1.27mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x26 1.27mm single row style2 pin1 right +0 +26 +26 +Connector_PinHeader_1.27mm +PinHeader_1x27_P1.27mm_Horizontal +Through hole angled pin header, 1x27, 1.27mm pitch, 4.0mm pin length, single row +Through hole angled pin header THT 1x27 1.27mm single row +0 +27 +27 +Connector_PinHeader_1.27mm +PinHeader_1x27_P1.27mm_Vertical +Through hole straight pin header, 1x27, 1.27mm pitch, single row +Through hole pin header THT 1x27 1.27mm single row +0 +27 +27 +Connector_PinHeader_1.27mm +PinHeader_1x27_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x27, 1.27mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x27 1.27mm single row style1 pin1 left +0 +27 +27 +Connector_PinHeader_1.27mm +PinHeader_1x27_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x27, 1.27mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x27 1.27mm single row style2 pin1 right +0 +27 +27 +Connector_PinHeader_1.27mm +PinHeader_1x28_P1.27mm_Horizontal +Through hole angled pin header, 1x28, 1.27mm pitch, 4.0mm pin length, single row +Through hole angled pin header THT 1x28 1.27mm single row +0 +28 +28 +Connector_PinHeader_1.27mm +PinHeader_1x28_P1.27mm_Vertical +Through hole straight pin header, 1x28, 1.27mm pitch, single row +Through hole pin header THT 1x28 1.27mm single row +0 +28 +28 +Connector_PinHeader_1.27mm +PinHeader_1x28_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x28, 1.27mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x28 1.27mm single row style1 pin1 left +0 +28 +28 +Connector_PinHeader_1.27mm +PinHeader_1x28_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x28, 1.27mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x28 1.27mm single row style2 pin1 right +0 +28 +28 +Connector_PinHeader_1.27mm +PinHeader_1x29_P1.27mm_Horizontal +Through hole angled pin header, 1x29, 1.27mm pitch, 4.0mm pin length, single row +Through hole angled pin header THT 1x29 1.27mm single row +0 +29 +29 +Connector_PinHeader_1.27mm +PinHeader_1x29_P1.27mm_Vertical +Through hole straight pin header, 1x29, 1.27mm pitch, single row +Through hole pin header THT 1x29 1.27mm single row +0 +29 +29 +Connector_PinHeader_1.27mm +PinHeader_1x29_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x29, 1.27mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x29 1.27mm single row style1 pin1 left +0 +29 +29 +Connector_PinHeader_1.27mm +PinHeader_1x29_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x29, 1.27mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x29 1.27mm single row style2 pin1 right +0 +29 +29 +Connector_PinHeader_1.27mm +PinHeader_1x30_P1.27mm_Horizontal +Through hole angled pin header, 1x30, 1.27mm pitch, 4.0mm pin length, single row +Through hole angled pin header THT 1x30 1.27mm single row +0 +30 +30 +Connector_PinHeader_1.27mm +PinHeader_1x30_P1.27mm_Vertical +Through hole straight pin header, 1x30, 1.27mm pitch, single row +Through hole pin header THT 1x30 1.27mm single row +0 +30 +30 +Connector_PinHeader_1.27mm +PinHeader_1x30_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x30, 1.27mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x30 1.27mm single row style1 pin1 left +0 +30 +30 +Connector_PinHeader_1.27mm +PinHeader_1x30_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x30, 1.27mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x30 1.27mm single row style2 pin1 right +0 +30 +30 +Connector_PinHeader_1.27mm +PinHeader_1x31_P1.27mm_Horizontal +Through hole angled pin header, 1x31, 1.27mm pitch, 4.0mm pin length, single row +Through hole angled pin header THT 1x31 1.27mm single row +0 +31 +31 +Connector_PinHeader_1.27mm +PinHeader_1x31_P1.27mm_Vertical +Through hole straight pin header, 1x31, 1.27mm pitch, single row +Through hole pin header THT 1x31 1.27mm single row +0 +31 +31 +Connector_PinHeader_1.27mm +PinHeader_1x31_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x31, 1.27mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x31 1.27mm single row style1 pin1 left +0 +31 +31 +Connector_PinHeader_1.27mm +PinHeader_1x31_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x31, 1.27mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x31 1.27mm single row style2 pin1 right +0 +31 +31 +Connector_PinHeader_1.27mm +PinHeader_1x32_P1.27mm_Horizontal +Through hole angled pin header, 1x32, 1.27mm pitch, 4.0mm pin length, single row +Through hole angled pin header THT 1x32 1.27mm single row +0 +32 +32 +Connector_PinHeader_1.27mm +PinHeader_1x32_P1.27mm_Vertical +Through hole straight pin header, 1x32, 1.27mm pitch, single row +Through hole pin header THT 1x32 1.27mm single row +0 +32 +32 +Connector_PinHeader_1.27mm +PinHeader_1x32_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x32, 1.27mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x32 1.27mm single row style1 pin1 left +0 +32 +32 +Connector_PinHeader_1.27mm +PinHeader_1x32_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x32, 1.27mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x32 1.27mm single row style2 pin1 right +0 +32 +32 +Connector_PinHeader_1.27mm +PinHeader_1x33_P1.27mm_Horizontal +Through hole angled pin header, 1x33, 1.27mm pitch, 4.0mm pin length, single row +Through hole angled pin header THT 1x33 1.27mm single row +0 +33 +33 +Connector_PinHeader_1.27mm +PinHeader_1x33_P1.27mm_Vertical +Through hole straight pin header, 1x33, 1.27mm pitch, single row +Through hole pin header THT 1x33 1.27mm single row +0 +33 +33 +Connector_PinHeader_1.27mm +PinHeader_1x33_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x33, 1.27mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x33 1.27mm single row style1 pin1 left +0 +33 +33 +Connector_PinHeader_1.27mm +PinHeader_1x33_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x33, 1.27mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x33 1.27mm single row style2 pin1 right +0 +33 +33 +Connector_PinHeader_1.27mm +PinHeader_1x34_P1.27mm_Horizontal +Through hole angled pin header, 1x34, 1.27mm pitch, 4.0mm pin length, single row +Through hole angled pin header THT 1x34 1.27mm single row +0 +34 +34 +Connector_PinHeader_1.27mm +PinHeader_1x34_P1.27mm_Vertical +Through hole straight pin header, 1x34, 1.27mm pitch, single row +Through hole pin header THT 1x34 1.27mm single row +0 +34 +34 +Connector_PinHeader_1.27mm +PinHeader_1x34_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x34, 1.27mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x34 1.27mm single row style1 pin1 left +0 +34 +34 +Connector_PinHeader_1.27mm +PinHeader_1x34_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x34, 1.27mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x34 1.27mm single row style2 pin1 right +0 +34 +34 +Connector_PinHeader_1.27mm +PinHeader_1x35_P1.27mm_Horizontal +Through hole angled pin header, 1x35, 1.27mm pitch, 4.0mm pin length, single row +Through hole angled pin header THT 1x35 1.27mm single row +0 +35 +35 +Connector_PinHeader_1.27mm +PinHeader_1x35_P1.27mm_Vertical +Through hole straight pin header, 1x35, 1.27mm pitch, single row +Through hole pin header THT 1x35 1.27mm single row +0 +35 +35 +Connector_PinHeader_1.27mm +PinHeader_1x35_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x35, 1.27mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x35 1.27mm single row style1 pin1 left +0 +35 +35 +Connector_PinHeader_1.27mm +PinHeader_1x35_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x35, 1.27mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x35 1.27mm single row style2 pin1 right +0 +35 +35 +Connector_PinHeader_1.27mm +PinHeader_1x36_P1.27mm_Horizontal +Through hole angled pin header, 1x36, 1.27mm pitch, 4.0mm pin length, single row +Through hole angled pin header THT 1x36 1.27mm single row +0 +36 +36 +Connector_PinHeader_1.27mm +PinHeader_1x36_P1.27mm_Vertical +Through hole straight pin header, 1x36, 1.27mm pitch, single row +Through hole pin header THT 1x36 1.27mm single row +0 +36 +36 +Connector_PinHeader_1.27mm +PinHeader_1x36_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x36, 1.27mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x36 1.27mm single row style1 pin1 left +0 +36 +36 +Connector_PinHeader_1.27mm +PinHeader_1x36_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x36, 1.27mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x36 1.27mm single row style2 pin1 right +0 +36 +36 +Connector_PinHeader_1.27mm +PinHeader_1x37_P1.27mm_Horizontal +Through hole angled pin header, 1x37, 1.27mm pitch, 4.0mm pin length, single row +Through hole angled pin header THT 1x37 1.27mm single row +0 +37 +37 +Connector_PinHeader_1.27mm +PinHeader_1x37_P1.27mm_Vertical +Through hole straight pin header, 1x37, 1.27mm pitch, single row +Through hole pin header THT 1x37 1.27mm single row +0 +37 +37 +Connector_PinHeader_1.27mm +PinHeader_1x37_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x37, 1.27mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x37 1.27mm single row style1 pin1 left +0 +37 +37 +Connector_PinHeader_1.27mm +PinHeader_1x37_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x37, 1.27mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x37 1.27mm single row style2 pin1 right +0 +37 +37 +Connector_PinHeader_1.27mm +PinHeader_1x38_P1.27mm_Horizontal +Through hole angled pin header, 1x38, 1.27mm pitch, 4.0mm pin length, single row +Through hole angled pin header THT 1x38 1.27mm single row +0 +38 +38 +Connector_PinHeader_1.27mm +PinHeader_1x38_P1.27mm_Vertical +Through hole straight pin header, 1x38, 1.27mm pitch, single row +Through hole pin header THT 1x38 1.27mm single row +0 +38 +38 +Connector_PinHeader_1.27mm +PinHeader_1x38_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x38, 1.27mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x38 1.27mm single row style1 pin1 left +0 +38 +38 +Connector_PinHeader_1.27mm +PinHeader_1x38_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x38, 1.27mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x38 1.27mm single row style2 pin1 right +0 +38 +38 +Connector_PinHeader_1.27mm +PinHeader_1x39_P1.27mm_Horizontal +Through hole angled pin header, 1x39, 1.27mm pitch, 4.0mm pin length, single row +Through hole angled pin header THT 1x39 1.27mm single row +0 +39 +39 +Connector_PinHeader_1.27mm +PinHeader_1x39_P1.27mm_Vertical +Through hole straight pin header, 1x39, 1.27mm pitch, single row +Through hole pin header THT 1x39 1.27mm single row +0 +39 +39 +Connector_PinHeader_1.27mm +PinHeader_1x39_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x39, 1.27mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x39 1.27mm single row style1 pin1 left +0 +39 +39 +Connector_PinHeader_1.27mm +PinHeader_1x39_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x39, 1.27mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x39 1.27mm single row style2 pin1 right +0 +39 +39 +Connector_PinHeader_1.27mm +PinHeader_1x40_P1.27mm_Horizontal +Through hole angled pin header, 1x40, 1.27mm pitch, 4.0mm pin length, single row +Through hole angled pin header THT 1x40 1.27mm single row +0 +40 +40 +Connector_PinHeader_1.27mm +PinHeader_1x40_P1.27mm_Vertical +Through hole straight pin header, 1x40, 1.27mm pitch, single row +Through hole pin header THT 1x40 1.27mm single row +0 +40 +40 +Connector_PinHeader_1.27mm +PinHeader_1x40_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x40, 1.27mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x40 1.27mm single row style1 pin1 left +0 +40 +40 +Connector_PinHeader_1.27mm +PinHeader_1x40_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x40, 1.27mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x40 1.27mm single row style2 pin1 right +0 +40 +40 +Connector_PinHeader_1.27mm +PinHeader_2x01_P1.27mm_Horizontal +Through hole angled pin header, 2x01, 1.27mm pitch, 4.0mm pin length, double rows +Through hole angled pin header THT 2x01 1.27mm double row +0 +2 +2 +Connector_PinHeader_1.27mm +PinHeader_2x01_P1.27mm_Vertical +Through hole straight pin header, 2x01, 1.27mm pitch, double rows +Through hole pin header THT 2x01 1.27mm double row +0 +2 +2 +Connector_PinHeader_1.27mm +PinHeader_2x01_P1.27mm_Vertical_SMD +surface-mounted straight pin header, 2x01, 1.27mm pitch, double rows +Surface mounted pin header SMD 2x01 1.27mm double row +0 +2 +2 +Connector_PinHeader_1.27mm +PinHeader_2x02_P1.27mm_Horizontal +Through hole angled pin header, 2x02, 1.27mm pitch, 4.0mm pin length, double rows +Through hole angled pin header THT 2x02 1.27mm double row +0 +4 +4 +Connector_PinHeader_1.27mm +PinHeader_2x02_P1.27mm_Vertical +Through hole straight pin header, 2x02, 1.27mm pitch, double rows +Through hole pin header THT 2x02 1.27mm double row +0 +4 +4 +Connector_PinHeader_1.27mm +PinHeader_2x02_P1.27mm_Vertical_SMD +surface-mounted straight pin header, 2x02, 1.27mm pitch, double rows +Surface mounted pin header SMD 2x02 1.27mm double row +0 +4 +4 +Connector_PinHeader_1.27mm +PinHeader_2x03_P1.27mm_Horizontal +Through hole angled pin header, 2x03, 1.27mm pitch, 4.0mm pin length, double rows +Through hole angled pin header THT 2x03 1.27mm double row +0 +6 +6 +Connector_PinHeader_1.27mm +PinHeader_2x03_P1.27mm_Vertical +Through hole straight pin header, 2x03, 1.27mm pitch, double rows +Through hole pin header THT 2x03 1.27mm double row +0 +6 +6 +Connector_PinHeader_1.27mm +PinHeader_2x03_P1.27mm_Vertical_SMD +surface-mounted straight pin header, 2x03, 1.27mm pitch, double rows +Surface mounted pin header SMD 2x03 1.27mm double row +0 +6 +6 +Connector_PinHeader_1.27mm +PinHeader_2x04_P1.27mm_Horizontal +Through hole angled pin header, 2x04, 1.27mm pitch, 4.0mm pin length, double rows +Through hole angled pin header THT 2x04 1.27mm double row +0 +8 +8 +Connector_PinHeader_1.27mm +PinHeader_2x04_P1.27mm_Vertical +Through hole straight pin header, 2x04, 1.27mm pitch, double rows +Through hole pin header THT 2x04 1.27mm double row +0 +8 +8 +Connector_PinHeader_1.27mm +PinHeader_2x04_P1.27mm_Vertical_SMD +surface-mounted straight pin header, 2x04, 1.27mm pitch, double rows +Surface mounted pin header SMD 2x04 1.27mm double row +0 +8 +8 +Connector_PinHeader_1.27mm +PinHeader_2x05_P1.27mm_Horizontal +Through hole angled pin header, 2x05, 1.27mm pitch, 4.0mm pin length, double rows +Through hole angled pin header THT 2x05 1.27mm double row +0 +10 +10 +Connector_PinHeader_1.27mm +PinHeader_2x05_P1.27mm_Vertical +Through hole straight pin header, 2x05, 1.27mm pitch, double rows +Through hole pin header THT 2x05 1.27mm double row +0 +10 +10 +Connector_PinHeader_1.27mm +PinHeader_2x05_P1.27mm_Vertical_SMD +surface-mounted straight pin header, 2x05, 1.27mm pitch, double rows +Surface mounted pin header SMD 2x05 1.27mm double row +0 +10 +10 +Connector_PinHeader_1.27mm +PinHeader_2x06_P1.27mm_Horizontal +Through hole angled pin header, 2x06, 1.27mm pitch, 4.0mm pin length, double rows +Through hole angled pin header THT 2x06 1.27mm double row +0 +12 +12 +Connector_PinHeader_1.27mm +PinHeader_2x06_P1.27mm_Vertical +Through hole straight pin header, 2x06, 1.27mm pitch, double rows +Through hole pin header THT 2x06 1.27mm double row +0 +12 +12 +Connector_PinHeader_1.27mm +PinHeader_2x06_P1.27mm_Vertical_SMD +surface-mounted straight pin header, 2x06, 1.27mm pitch, double rows +Surface mounted pin header SMD 2x06 1.27mm double row +0 +12 +12 +Connector_PinHeader_1.27mm +PinHeader_2x07_P1.27mm_Horizontal +Through hole angled pin header, 2x07, 1.27mm pitch, 4.0mm pin length, double rows +Through hole angled pin header THT 2x07 1.27mm double row +0 +14 +14 +Connector_PinHeader_1.27mm +PinHeader_2x07_P1.27mm_Vertical +Through hole straight pin header, 2x07, 1.27mm pitch, double rows +Through hole pin header THT 2x07 1.27mm double row +0 +14 +14 +Connector_PinHeader_1.27mm +PinHeader_2x07_P1.27mm_Vertical_SMD +surface-mounted straight pin header, 2x07, 1.27mm pitch, double rows +Surface mounted pin header SMD 2x07 1.27mm double row +0 +14 +14 +Connector_PinHeader_1.27mm +PinHeader_2x08_P1.27mm_Horizontal +Through hole angled pin header, 2x08, 1.27mm pitch, 4.0mm pin length, double rows +Through hole angled pin header THT 2x08 1.27mm double row +0 +16 +16 +Connector_PinHeader_1.27mm +PinHeader_2x08_P1.27mm_Vertical +Through hole straight pin header, 2x08, 1.27mm pitch, double rows +Through hole pin header THT 2x08 1.27mm double row +0 +16 +16 +Connector_PinHeader_1.27mm +PinHeader_2x08_P1.27mm_Vertical_SMD +surface-mounted straight pin header, 2x08, 1.27mm pitch, double rows +Surface mounted pin header SMD 2x08 1.27mm double row +0 +16 +16 +Connector_PinHeader_1.27mm +PinHeader_2x09_P1.27mm_Horizontal +Through hole angled pin header, 2x09, 1.27mm pitch, 4.0mm pin length, double rows +Through hole angled pin header THT 2x09 1.27mm double row +0 +18 +18 +Connector_PinHeader_1.27mm +PinHeader_2x09_P1.27mm_Vertical +Through hole straight pin header, 2x09, 1.27mm pitch, double rows +Through hole pin header THT 2x09 1.27mm double row +0 +18 +18 +Connector_PinHeader_1.27mm +PinHeader_2x09_P1.27mm_Vertical_SMD +surface-mounted straight pin header, 2x09, 1.27mm pitch, double rows +Surface mounted pin header SMD 2x09 1.27mm double row +0 +18 +18 +Connector_PinHeader_1.27mm +PinHeader_2x10_P1.27mm_Horizontal +Through hole angled pin header, 2x10, 1.27mm pitch, 4.0mm pin length, double rows +Through hole angled pin header THT 2x10 1.27mm double row +0 +20 +20 +Connector_PinHeader_1.27mm +PinHeader_2x10_P1.27mm_Vertical +Through hole straight pin header, 2x10, 1.27mm pitch, double rows +Through hole pin header THT 2x10 1.27mm double row +0 +20 +20 +Connector_PinHeader_1.27mm +PinHeader_2x10_P1.27mm_Vertical_SMD +surface-mounted straight pin header, 2x10, 1.27mm pitch, double rows +Surface mounted pin header SMD 2x10 1.27mm double row +0 +20 +20 +Connector_PinHeader_1.27mm +PinHeader_2x11_P1.27mm_Horizontal +Through hole angled pin header, 2x11, 1.27mm pitch, 4.0mm pin length, double rows +Through hole angled pin header THT 2x11 1.27mm double row +0 +22 +22 +Connector_PinHeader_1.27mm +PinHeader_2x11_P1.27mm_Vertical +Through hole straight pin header, 2x11, 1.27mm pitch, double rows +Through hole pin header THT 2x11 1.27mm double row +0 +22 +22 +Connector_PinHeader_1.27mm +PinHeader_2x11_P1.27mm_Vertical_SMD +surface-mounted straight pin header, 2x11, 1.27mm pitch, double rows +Surface mounted pin header SMD 2x11 1.27mm double row +0 +22 +22 +Connector_PinHeader_1.27mm +PinHeader_2x12_P1.27mm_Horizontal +Through hole angled pin header, 2x12, 1.27mm pitch, 4.0mm pin length, double rows +Through hole angled pin header THT 2x12 1.27mm double row +0 +24 +24 +Connector_PinHeader_1.27mm +PinHeader_2x12_P1.27mm_Vertical +Through hole straight pin header, 2x12, 1.27mm pitch, double rows +Through hole pin header THT 2x12 1.27mm double row +0 +24 +24 +Connector_PinHeader_1.27mm +PinHeader_2x12_P1.27mm_Vertical_SMD +surface-mounted straight pin header, 2x12, 1.27mm pitch, double rows +Surface mounted pin header SMD 2x12 1.27mm double row +0 +24 +24 +Connector_PinHeader_1.27mm +PinHeader_2x13_P1.27mm_Horizontal +Through hole angled pin header, 2x13, 1.27mm pitch, 4.0mm pin length, double rows +Through hole angled pin header THT 2x13 1.27mm double row +0 +26 +26 +Connector_PinHeader_1.27mm +PinHeader_2x13_P1.27mm_Vertical +Through hole straight pin header, 2x13, 1.27mm pitch, double rows +Through hole pin header THT 2x13 1.27mm double row +0 +26 +26 +Connector_PinHeader_1.27mm +PinHeader_2x13_P1.27mm_Vertical_SMD +surface-mounted straight pin header, 2x13, 1.27mm pitch, double rows +Surface mounted pin header SMD 2x13 1.27mm double row +0 +26 +26 +Connector_PinHeader_1.27mm +PinHeader_2x14_P1.27mm_Horizontal +Through hole angled pin header, 2x14, 1.27mm pitch, 4.0mm pin length, double rows +Through hole angled pin header THT 2x14 1.27mm double row +0 +28 +28 +Connector_PinHeader_1.27mm +PinHeader_2x14_P1.27mm_Vertical +Through hole straight pin header, 2x14, 1.27mm pitch, double rows +Through hole pin header THT 2x14 1.27mm double row +0 +28 +28 +Connector_PinHeader_1.27mm +PinHeader_2x14_P1.27mm_Vertical_SMD +surface-mounted straight pin header, 2x14, 1.27mm pitch, double rows +Surface mounted pin header SMD 2x14 1.27mm double row +0 +28 +28 +Connector_PinHeader_1.27mm +PinHeader_2x15_P1.27mm_Horizontal +Through hole angled pin header, 2x15, 1.27mm pitch, 4.0mm pin length, double rows +Through hole angled pin header THT 2x15 1.27mm double row +0 +30 +30 +Connector_PinHeader_1.27mm +PinHeader_2x15_P1.27mm_Vertical +Through hole straight pin header, 2x15, 1.27mm pitch, double rows +Through hole pin header THT 2x15 1.27mm double row +0 +30 +30 +Connector_PinHeader_1.27mm +PinHeader_2x15_P1.27mm_Vertical_SMD +surface-mounted straight pin header, 2x15, 1.27mm pitch, double rows +Surface mounted pin header SMD 2x15 1.27mm double row +0 +30 +30 +Connector_PinHeader_1.27mm +PinHeader_2x16_P1.27mm_Horizontal +Through hole angled pin header, 2x16, 1.27mm pitch, 4.0mm pin length, double rows +Through hole angled pin header THT 2x16 1.27mm double row +0 +32 +32 +Connector_PinHeader_1.27mm +PinHeader_2x16_P1.27mm_Vertical +Through hole straight pin header, 2x16, 1.27mm pitch, double rows +Through hole pin header THT 2x16 1.27mm double row +0 +32 +32 +Connector_PinHeader_1.27mm +PinHeader_2x16_P1.27mm_Vertical_SMD +surface-mounted straight pin header, 2x16, 1.27mm pitch, double rows +Surface mounted pin header SMD 2x16 1.27mm double row +0 +32 +32 +Connector_PinHeader_1.27mm +PinHeader_2x17_P1.27mm_Horizontal +Through hole angled pin header, 2x17, 1.27mm pitch, 4.0mm pin length, double rows +Through hole angled pin header THT 2x17 1.27mm double row +0 +34 +34 +Connector_PinHeader_1.27mm +PinHeader_2x17_P1.27mm_Vertical +Through hole straight pin header, 2x17, 1.27mm pitch, double rows +Through hole pin header THT 2x17 1.27mm double row +0 +34 +34 +Connector_PinHeader_1.27mm +PinHeader_2x17_P1.27mm_Vertical_SMD +surface-mounted straight pin header, 2x17, 1.27mm pitch, double rows +Surface mounted pin header SMD 2x17 1.27mm double row +0 +34 +34 +Connector_PinHeader_1.27mm +PinHeader_2x18_P1.27mm_Horizontal +Through hole angled pin header, 2x18, 1.27mm pitch, 4.0mm pin length, double rows +Through hole angled pin header THT 2x18 1.27mm double row +0 +36 +36 +Connector_PinHeader_1.27mm +PinHeader_2x18_P1.27mm_Vertical +Through hole straight pin header, 2x18, 1.27mm pitch, double rows +Through hole pin header THT 2x18 1.27mm double row +0 +36 +36 +Connector_PinHeader_1.27mm +PinHeader_2x18_P1.27mm_Vertical_SMD +surface-mounted straight pin header, 2x18, 1.27mm pitch, double rows +Surface mounted pin header SMD 2x18 1.27mm double row +0 +36 +36 +Connector_PinHeader_1.27mm +PinHeader_2x19_P1.27mm_Horizontal +Through hole angled pin header, 2x19, 1.27mm pitch, 4.0mm pin length, double rows +Through hole angled pin header THT 2x19 1.27mm double row +0 +38 +38 +Connector_PinHeader_1.27mm +PinHeader_2x19_P1.27mm_Vertical +Through hole straight pin header, 2x19, 1.27mm pitch, double rows +Through hole pin header THT 2x19 1.27mm double row +0 +38 +38 +Connector_PinHeader_1.27mm +PinHeader_2x19_P1.27mm_Vertical_SMD +surface-mounted straight pin header, 2x19, 1.27mm pitch, double rows +Surface mounted pin header SMD 2x19 1.27mm double row +0 +38 +38 +Connector_PinHeader_1.27mm +PinHeader_2x20_P1.27mm_Horizontal +Through hole angled pin header, 2x20, 1.27mm pitch, 4.0mm pin length, double rows +Through hole angled pin header THT 2x20 1.27mm double row +0 +40 +40 +Connector_PinHeader_1.27mm +PinHeader_2x20_P1.27mm_Vertical +Through hole straight pin header, 2x20, 1.27mm pitch, double rows +Through hole pin header THT 2x20 1.27mm double row +0 +40 +40 +Connector_PinHeader_1.27mm +PinHeader_2x20_P1.27mm_Vertical_SMD +surface-mounted straight pin header, 2x20, 1.27mm pitch, double rows +Surface mounted pin header SMD 2x20 1.27mm double row +0 +40 +40 +Connector_PinHeader_1.27mm +PinHeader_2x21_P1.27mm_Horizontal +Through hole angled pin header, 2x21, 1.27mm pitch, 4.0mm pin length, double rows +Through hole angled pin header THT 2x21 1.27mm double row +0 +42 +42 +Connector_PinHeader_1.27mm +PinHeader_2x21_P1.27mm_Vertical +Through hole straight pin header, 2x21, 1.27mm pitch, double rows +Through hole pin header THT 2x21 1.27mm double row +0 +42 +42 +Connector_PinHeader_1.27mm +PinHeader_2x21_P1.27mm_Vertical_SMD +surface-mounted straight pin header, 2x21, 1.27mm pitch, double rows +Surface mounted pin header SMD 2x21 1.27mm double row +0 +42 +42 +Connector_PinHeader_1.27mm +PinHeader_2x22_P1.27mm_Horizontal +Through hole angled pin header, 2x22, 1.27mm pitch, 4.0mm pin length, double rows +Through hole angled pin header THT 2x22 1.27mm double row +0 +44 +44 +Connector_PinHeader_1.27mm +PinHeader_2x22_P1.27mm_Vertical +Through hole straight pin header, 2x22, 1.27mm pitch, double rows +Through hole pin header THT 2x22 1.27mm double row +0 +44 +44 +Connector_PinHeader_1.27mm +PinHeader_2x22_P1.27mm_Vertical_SMD +surface-mounted straight pin header, 2x22, 1.27mm pitch, double rows +Surface mounted pin header SMD 2x22 1.27mm double row +0 +44 +44 +Connector_PinHeader_1.27mm +PinHeader_2x23_P1.27mm_Horizontal +Through hole angled pin header, 2x23, 1.27mm pitch, 4.0mm pin length, double rows +Through hole angled pin header THT 2x23 1.27mm double row +0 +46 +46 +Connector_PinHeader_1.27mm +PinHeader_2x23_P1.27mm_Vertical +Through hole straight pin header, 2x23, 1.27mm pitch, double rows +Through hole pin header THT 2x23 1.27mm double row +0 +46 +46 +Connector_PinHeader_1.27mm +PinHeader_2x23_P1.27mm_Vertical_SMD +surface-mounted straight pin header, 2x23, 1.27mm pitch, double rows +Surface mounted pin header SMD 2x23 1.27mm double row +0 +46 +46 +Connector_PinHeader_1.27mm +PinHeader_2x24_P1.27mm_Horizontal +Through hole angled pin header, 2x24, 1.27mm pitch, 4.0mm pin length, double rows +Through hole angled pin header THT 2x24 1.27mm double row +0 +48 +48 +Connector_PinHeader_1.27mm +PinHeader_2x24_P1.27mm_Vertical +Through hole straight pin header, 2x24, 1.27mm pitch, double rows +Through hole pin header THT 2x24 1.27mm double row +0 +48 +48 +Connector_PinHeader_1.27mm +PinHeader_2x24_P1.27mm_Vertical_SMD +surface-mounted straight pin header, 2x24, 1.27mm pitch, double rows +Surface mounted pin header SMD 2x24 1.27mm double row +0 +48 +48 +Connector_PinHeader_1.27mm +PinHeader_2x25_P1.27mm_Horizontal +Through hole angled pin header, 2x25, 1.27mm pitch, 4.0mm pin length, double rows +Through hole angled pin header THT 2x25 1.27mm double row +0 +50 +50 +Connector_PinHeader_1.27mm +PinHeader_2x25_P1.27mm_Vertical +Through hole straight pin header, 2x25, 1.27mm pitch, double rows +Through hole pin header THT 2x25 1.27mm double row +0 +50 +50 +Connector_PinHeader_1.27mm +PinHeader_2x25_P1.27mm_Vertical_SMD +surface-mounted straight pin header, 2x25, 1.27mm pitch, double rows +Surface mounted pin header SMD 2x25 1.27mm double row +0 +50 +50 +Connector_PinHeader_1.27mm +PinHeader_2x26_P1.27mm_Horizontal +Through hole angled pin header, 2x26, 1.27mm pitch, 4.0mm pin length, double rows +Through hole angled pin header THT 2x26 1.27mm double row +0 +52 +52 +Connector_PinHeader_1.27mm +PinHeader_2x26_P1.27mm_Vertical +Through hole straight pin header, 2x26, 1.27mm pitch, double rows +Through hole pin header THT 2x26 1.27mm double row +0 +52 +52 +Connector_PinHeader_1.27mm +PinHeader_2x26_P1.27mm_Vertical_SMD +surface-mounted straight pin header, 2x26, 1.27mm pitch, double rows +Surface mounted pin header SMD 2x26 1.27mm double row +0 +52 +52 +Connector_PinHeader_1.27mm +PinHeader_2x27_P1.27mm_Horizontal +Through hole angled pin header, 2x27, 1.27mm pitch, 4.0mm pin length, double rows +Through hole angled pin header THT 2x27 1.27mm double row +0 +54 +54 +Connector_PinHeader_1.27mm +PinHeader_2x27_P1.27mm_Vertical +Through hole straight pin header, 2x27, 1.27mm pitch, double rows +Through hole pin header THT 2x27 1.27mm double row +0 +54 +54 +Connector_PinHeader_1.27mm +PinHeader_2x27_P1.27mm_Vertical_SMD +surface-mounted straight pin header, 2x27, 1.27mm pitch, double rows +Surface mounted pin header SMD 2x27 1.27mm double row +0 +54 +54 +Connector_PinHeader_1.27mm +PinHeader_2x28_P1.27mm_Horizontal +Through hole angled pin header, 2x28, 1.27mm pitch, 4.0mm pin length, double rows +Through hole angled pin header THT 2x28 1.27mm double row +0 +56 +56 +Connector_PinHeader_1.27mm +PinHeader_2x28_P1.27mm_Vertical +Through hole straight pin header, 2x28, 1.27mm pitch, double rows +Through hole pin header THT 2x28 1.27mm double row +0 +56 +56 +Connector_PinHeader_1.27mm +PinHeader_2x28_P1.27mm_Vertical_SMD +surface-mounted straight pin header, 2x28, 1.27mm pitch, double rows +Surface mounted pin header SMD 2x28 1.27mm double row +0 +56 +56 +Connector_PinHeader_1.27mm +PinHeader_2x29_P1.27mm_Horizontal +Through hole angled pin header, 2x29, 1.27mm pitch, 4.0mm pin length, double rows +Through hole angled pin header THT 2x29 1.27mm double row +0 +58 +58 +Connector_PinHeader_1.27mm +PinHeader_2x29_P1.27mm_Vertical +Through hole straight pin header, 2x29, 1.27mm pitch, double rows +Through hole pin header THT 2x29 1.27mm double row +0 +58 +58 +Connector_PinHeader_1.27mm +PinHeader_2x29_P1.27mm_Vertical_SMD +surface-mounted straight pin header, 2x29, 1.27mm pitch, double rows +Surface mounted pin header SMD 2x29 1.27mm double row +0 +58 +58 +Connector_PinHeader_1.27mm +PinHeader_2x30_P1.27mm_Horizontal +Through hole angled pin header, 2x30, 1.27mm pitch, 4.0mm pin length, double rows +Through hole angled pin header THT 2x30 1.27mm double row +0 +60 +60 +Connector_PinHeader_1.27mm +PinHeader_2x30_P1.27mm_Vertical +Through hole straight pin header, 2x30, 1.27mm pitch, double rows +Through hole pin header THT 2x30 1.27mm double row +0 +60 +60 +Connector_PinHeader_1.27mm +PinHeader_2x30_P1.27mm_Vertical_SMD +surface-mounted straight pin header, 2x30, 1.27mm pitch, double rows +Surface mounted pin header SMD 2x30 1.27mm double row +0 +60 +60 +Connector_PinHeader_1.27mm +PinHeader_2x31_P1.27mm_Horizontal +Through hole angled pin header, 2x31, 1.27mm pitch, 4.0mm pin length, double rows +Through hole angled pin header THT 2x31 1.27mm double row +0 +62 +62 +Connector_PinHeader_1.27mm +PinHeader_2x31_P1.27mm_Vertical +Through hole straight pin header, 2x31, 1.27mm pitch, double rows +Through hole pin header THT 2x31 1.27mm double row +0 +62 +62 +Connector_PinHeader_1.27mm +PinHeader_2x31_P1.27mm_Vertical_SMD +surface-mounted straight pin header, 2x31, 1.27mm pitch, double rows +Surface mounted pin header SMD 2x31 1.27mm double row +0 +62 +62 +Connector_PinHeader_1.27mm +PinHeader_2x32_P1.27mm_Horizontal +Through hole angled pin header, 2x32, 1.27mm pitch, 4.0mm pin length, double rows +Through hole angled pin header THT 2x32 1.27mm double row +0 +64 +64 +Connector_PinHeader_1.27mm +PinHeader_2x32_P1.27mm_Vertical +Through hole straight pin header, 2x32, 1.27mm pitch, double rows +Through hole pin header THT 2x32 1.27mm double row +0 +64 +64 +Connector_PinHeader_1.27mm +PinHeader_2x32_P1.27mm_Vertical_SMD +surface-mounted straight pin header, 2x32, 1.27mm pitch, double rows +Surface mounted pin header SMD 2x32 1.27mm double row +0 +64 +64 +Connector_PinHeader_1.27mm +PinHeader_2x33_P1.27mm_Horizontal +Through hole angled pin header, 2x33, 1.27mm pitch, 4.0mm pin length, double rows +Through hole angled pin header THT 2x33 1.27mm double row +0 +66 +66 +Connector_PinHeader_1.27mm +PinHeader_2x33_P1.27mm_Vertical +Through hole straight pin header, 2x33, 1.27mm pitch, double rows +Through hole pin header THT 2x33 1.27mm double row +0 +66 +66 +Connector_PinHeader_1.27mm +PinHeader_2x33_P1.27mm_Vertical_SMD +surface-mounted straight pin header, 2x33, 1.27mm pitch, double rows +Surface mounted pin header SMD 2x33 1.27mm double row +0 +66 +66 +Connector_PinHeader_1.27mm +PinHeader_2x34_P1.27mm_Horizontal +Through hole angled pin header, 2x34, 1.27mm pitch, 4.0mm pin length, double rows +Through hole angled pin header THT 2x34 1.27mm double row +0 +68 +68 +Connector_PinHeader_1.27mm +PinHeader_2x34_P1.27mm_Vertical +Through hole straight pin header, 2x34, 1.27mm pitch, double rows +Through hole pin header THT 2x34 1.27mm double row +0 +68 +68 +Connector_PinHeader_1.27mm +PinHeader_2x34_P1.27mm_Vertical_SMD +surface-mounted straight pin header, 2x34, 1.27mm pitch, double rows +Surface mounted pin header SMD 2x34 1.27mm double row +0 +68 +68 +Connector_PinHeader_1.27mm +PinHeader_2x35_P1.27mm_Horizontal +Through hole angled pin header, 2x35, 1.27mm pitch, 4.0mm pin length, double rows +Through hole angled pin header THT 2x35 1.27mm double row +0 +70 +70 +Connector_PinHeader_1.27mm +PinHeader_2x35_P1.27mm_Vertical +Through hole straight pin header, 2x35, 1.27mm pitch, double rows +Through hole pin header THT 2x35 1.27mm double row +0 +70 +70 +Connector_PinHeader_1.27mm +PinHeader_2x35_P1.27mm_Vertical_SMD +surface-mounted straight pin header, 2x35, 1.27mm pitch, double rows +Surface mounted pin header SMD 2x35 1.27mm double row +0 +70 +70 +Connector_PinHeader_1.27mm +PinHeader_2x36_P1.27mm_Horizontal +Through hole angled pin header, 2x36, 1.27mm pitch, 4.0mm pin length, double rows +Through hole angled pin header THT 2x36 1.27mm double row +0 +72 +72 +Connector_PinHeader_1.27mm +PinHeader_2x36_P1.27mm_Vertical +Through hole straight pin header, 2x36, 1.27mm pitch, double rows +Through hole pin header THT 2x36 1.27mm double row +0 +72 +72 +Connector_PinHeader_1.27mm +PinHeader_2x36_P1.27mm_Vertical_SMD +surface-mounted straight pin header, 2x36, 1.27mm pitch, double rows +Surface mounted pin header SMD 2x36 1.27mm double row +0 +72 +72 +Connector_PinHeader_1.27mm +PinHeader_2x37_P1.27mm_Horizontal +Through hole angled pin header, 2x37, 1.27mm pitch, 4.0mm pin length, double rows +Through hole angled pin header THT 2x37 1.27mm double row +0 +74 +74 +Connector_PinHeader_1.27mm +PinHeader_2x37_P1.27mm_Vertical +Through hole straight pin header, 2x37, 1.27mm pitch, double rows +Through hole pin header THT 2x37 1.27mm double row +0 +74 +74 +Connector_PinHeader_1.27mm +PinHeader_2x37_P1.27mm_Vertical_SMD +surface-mounted straight pin header, 2x37, 1.27mm pitch, double rows +Surface mounted pin header SMD 2x37 1.27mm double row +0 +74 +74 +Connector_PinHeader_1.27mm +PinHeader_2x38_P1.27mm_Horizontal +Through hole angled pin header, 2x38, 1.27mm pitch, 4.0mm pin length, double rows +Through hole angled pin header THT 2x38 1.27mm double row +0 +76 +76 +Connector_PinHeader_1.27mm +PinHeader_2x38_P1.27mm_Vertical +Through hole straight pin header, 2x38, 1.27mm pitch, double rows +Through hole pin header THT 2x38 1.27mm double row +0 +76 +76 +Connector_PinHeader_1.27mm +PinHeader_2x38_P1.27mm_Vertical_SMD +surface-mounted straight pin header, 2x38, 1.27mm pitch, double rows +Surface mounted pin header SMD 2x38 1.27mm double row +0 +76 +76 +Connector_PinHeader_1.27mm +PinHeader_2x39_P1.27mm_Horizontal +Through hole angled pin header, 2x39, 1.27mm pitch, 4.0mm pin length, double rows +Through hole angled pin header THT 2x39 1.27mm double row +0 +78 +78 +Connector_PinHeader_1.27mm +PinHeader_2x39_P1.27mm_Vertical +Through hole straight pin header, 2x39, 1.27mm pitch, double rows +Through hole pin header THT 2x39 1.27mm double row +0 +78 +78 +Connector_PinHeader_1.27mm +PinHeader_2x39_P1.27mm_Vertical_SMD +surface-mounted straight pin header, 2x39, 1.27mm pitch, double rows +Surface mounted pin header SMD 2x39 1.27mm double row +0 +78 +78 +Connector_PinHeader_1.27mm +PinHeader_2x40_P1.27mm_Horizontal +Through hole angled pin header, 2x40, 1.27mm pitch, 4.0mm pin length, double rows +Through hole angled pin header THT 2x40 1.27mm double row +0 +80 +80 +Connector_PinHeader_1.27mm +PinHeader_2x40_P1.27mm_Vertical +Through hole straight pin header, 2x40, 1.27mm pitch, double rows +Through hole pin header THT 2x40 1.27mm double row +0 +80 +80 +Connector_PinHeader_1.27mm +PinHeader_2x40_P1.27mm_Vertical_SMD +surface-mounted straight pin header, 2x40, 1.27mm pitch, double rows +Surface mounted pin header SMD 2x40 1.27mm double row +0 +80 +80 +Connector_PinHeader_2.00mm +PinHeader_1x01_P2.00mm_Horizontal +Through hole angled pin header, 1x01, 2.00mm pitch, 4.2mm pin length, single row +Through hole angled pin header THT 1x01 2.00mm single row +0 +1 +1 +Connector_PinHeader_2.00mm +PinHeader_1x01_P2.00mm_Vertical +Through hole straight pin header, 1x01, 2.00mm pitch, single row +Through hole pin header THT 1x01 2.00mm single row +0 +1 +1 +Connector_PinHeader_2.00mm +PinHeader_1x02_P2.00mm_Horizontal +Through hole angled pin header, 1x02, 2.00mm pitch, 4.2mm pin length, single row +Through hole angled pin header THT 1x02 2.00mm single row +0 +2 +2 +Connector_PinHeader_2.00mm +PinHeader_1x02_P2.00mm_Vertical +Through hole straight pin header, 1x02, 2.00mm pitch, single row +Through hole pin header THT 1x02 2.00mm single row +0 +2 +2 +Connector_PinHeader_2.00mm +PinHeader_1x02_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x02, 2.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x02 2.00mm single row style1 pin1 left +0 +2 +2 +Connector_PinHeader_2.00mm +PinHeader_1x02_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x02, 2.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x02 2.00mm single row style2 pin1 right +0 +2 +2 +Connector_PinHeader_2.00mm +PinHeader_1x03_P2.00mm_Horizontal +Through hole angled pin header, 1x03, 2.00mm pitch, 4.2mm pin length, single row +Through hole angled pin header THT 1x03 2.00mm single row +0 +3 +3 +Connector_PinHeader_2.00mm +PinHeader_1x03_P2.00mm_Vertical +Through hole straight pin header, 1x03, 2.00mm pitch, single row +Through hole pin header THT 1x03 2.00mm single row +0 +3 +3 +Connector_PinHeader_2.00mm +PinHeader_1x03_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x03, 2.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x03 2.00mm single row style1 pin1 left +0 +3 +3 +Connector_PinHeader_2.00mm +PinHeader_1x03_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x03, 2.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x03 2.00mm single row style2 pin1 right +0 +3 +3 +Connector_PinHeader_2.00mm +PinHeader_1x04_P2.00mm_Horizontal +Through hole angled pin header, 1x04, 2.00mm pitch, 4.2mm pin length, single row +Through hole angled pin header THT 1x04 2.00mm single row +0 +4 +4 +Connector_PinHeader_2.00mm +PinHeader_1x04_P2.00mm_Vertical +Through hole straight pin header, 1x04, 2.00mm pitch, single row +Through hole pin header THT 1x04 2.00mm single row +0 +4 +4 +Connector_PinHeader_2.00mm +PinHeader_1x04_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x04, 2.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x04 2.00mm single row style1 pin1 left +0 +4 +4 +Connector_PinHeader_2.00mm +PinHeader_1x04_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x04, 2.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x04 2.00mm single row style2 pin1 right +0 +4 +4 +Connector_PinHeader_2.00mm +PinHeader_1x05_P2.00mm_Horizontal +Through hole angled pin header, 1x05, 2.00mm pitch, 4.2mm pin length, single row +Through hole angled pin header THT 1x05 2.00mm single row +0 +5 +5 +Connector_PinHeader_2.00mm +PinHeader_1x05_P2.00mm_Vertical +Through hole straight pin header, 1x05, 2.00mm pitch, single row +Through hole pin header THT 1x05 2.00mm single row +0 +5 +5 +Connector_PinHeader_2.00mm +PinHeader_1x05_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x05, 2.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x05 2.00mm single row style1 pin1 left +0 +5 +5 +Connector_PinHeader_2.00mm +PinHeader_1x05_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x05, 2.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x05 2.00mm single row style2 pin1 right +0 +5 +5 +Connector_PinHeader_2.00mm +PinHeader_1x06_P2.00mm_Horizontal +Through hole angled pin header, 1x06, 2.00mm pitch, 4.2mm pin length, single row +Through hole angled pin header THT 1x06 2.00mm single row +0 +6 +6 +Connector_PinHeader_2.00mm +PinHeader_1x06_P2.00mm_Vertical +Through hole straight pin header, 1x06, 2.00mm pitch, single row +Through hole pin header THT 1x06 2.00mm single row +0 +6 +6 +Connector_PinHeader_2.00mm +PinHeader_1x06_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x06, 2.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x06 2.00mm single row style1 pin1 left +0 +6 +6 +Connector_PinHeader_2.00mm +PinHeader_1x06_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x06, 2.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x06 2.00mm single row style2 pin1 right +0 +6 +6 +Connector_PinHeader_2.00mm +PinHeader_1x07_P2.00mm_Horizontal +Through hole angled pin header, 1x07, 2.00mm pitch, 4.2mm pin length, single row +Through hole angled pin header THT 1x07 2.00mm single row +0 +7 +7 +Connector_PinHeader_2.00mm +PinHeader_1x07_P2.00mm_Vertical +Through hole straight pin header, 1x07, 2.00mm pitch, single row +Through hole pin header THT 1x07 2.00mm single row +0 +7 +7 +Connector_PinHeader_2.00mm +PinHeader_1x07_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x07, 2.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x07 2.00mm single row style1 pin1 left +0 +7 +7 +Connector_PinHeader_2.00mm +PinHeader_1x07_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x07, 2.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x07 2.00mm single row style2 pin1 right +0 +7 +7 +Connector_PinHeader_2.00mm +PinHeader_1x08_P2.00mm_Horizontal +Through hole angled pin header, 1x08, 2.00mm pitch, 4.2mm pin length, single row +Through hole angled pin header THT 1x08 2.00mm single row +0 +8 +8 +Connector_PinHeader_2.00mm +PinHeader_1x08_P2.00mm_Vertical +Through hole straight pin header, 1x08, 2.00mm pitch, single row +Through hole pin header THT 1x08 2.00mm single row +0 +8 +8 +Connector_PinHeader_2.00mm +PinHeader_1x08_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x08, 2.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x08 2.00mm single row style1 pin1 left +0 +8 +8 +Connector_PinHeader_2.00mm +PinHeader_1x08_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x08, 2.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x08 2.00mm single row style2 pin1 right +0 +8 +8 +Connector_PinHeader_2.00mm +PinHeader_1x09_P2.00mm_Horizontal +Through hole angled pin header, 1x09, 2.00mm pitch, 4.2mm pin length, single row +Through hole angled pin header THT 1x09 2.00mm single row +0 +9 +9 +Connector_PinHeader_2.00mm +PinHeader_1x09_P2.00mm_Vertical +Through hole straight pin header, 1x09, 2.00mm pitch, single row +Through hole pin header THT 1x09 2.00mm single row +0 +9 +9 +Connector_PinHeader_2.00mm +PinHeader_1x09_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x09, 2.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x09 2.00mm single row style1 pin1 left +0 +9 +9 +Connector_PinHeader_2.00mm +PinHeader_1x09_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x09, 2.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x09 2.00mm single row style2 pin1 right +0 +9 +9 +Connector_PinHeader_2.00mm +PinHeader_1x10_P2.00mm_Horizontal +Through hole angled pin header, 1x10, 2.00mm pitch, 4.2mm pin length, single row +Through hole angled pin header THT 1x10 2.00mm single row +0 +10 +10 +Connector_PinHeader_2.00mm +PinHeader_1x10_P2.00mm_Vertical +Through hole straight pin header, 1x10, 2.00mm pitch, single row +Through hole pin header THT 1x10 2.00mm single row +0 +10 +10 +Connector_PinHeader_2.00mm +PinHeader_1x10_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x10, 2.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x10 2.00mm single row style1 pin1 left +0 +10 +10 +Connector_PinHeader_2.00mm +PinHeader_1x10_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x10, 2.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x10 2.00mm single row style2 pin1 right +0 +10 +10 +Connector_PinHeader_2.00mm +PinHeader_1x11_P2.00mm_Horizontal +Through hole angled pin header, 1x11, 2.00mm pitch, 4.2mm pin length, single row +Through hole angled pin header THT 1x11 2.00mm single row +0 +11 +11 +Connector_PinHeader_2.00mm +PinHeader_1x11_P2.00mm_Vertical +Through hole straight pin header, 1x11, 2.00mm pitch, single row +Through hole pin header THT 1x11 2.00mm single row +0 +11 +11 +Connector_PinHeader_2.00mm +PinHeader_1x11_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x11, 2.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x11 2.00mm single row style1 pin1 left +0 +11 +11 +Connector_PinHeader_2.00mm +PinHeader_1x11_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x11, 2.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x11 2.00mm single row style2 pin1 right +0 +11 +11 +Connector_PinHeader_2.00mm +PinHeader_1x12_P2.00mm_Horizontal +Through hole angled pin header, 1x12, 2.00mm pitch, 4.2mm pin length, single row +Through hole angled pin header THT 1x12 2.00mm single row +0 +12 +12 +Connector_PinHeader_2.00mm +PinHeader_1x12_P2.00mm_Vertical +Through hole straight pin header, 1x12, 2.00mm pitch, single row +Through hole pin header THT 1x12 2.00mm single row +0 +12 +12 +Connector_PinHeader_2.00mm +PinHeader_1x12_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x12, 2.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x12 2.00mm single row style1 pin1 left +0 +12 +12 +Connector_PinHeader_2.00mm +PinHeader_1x12_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x12, 2.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x12 2.00mm single row style2 pin1 right +0 +12 +12 +Connector_PinHeader_2.00mm +PinHeader_1x13_P2.00mm_Horizontal +Through hole angled pin header, 1x13, 2.00mm pitch, 4.2mm pin length, single row +Through hole angled pin header THT 1x13 2.00mm single row +0 +13 +13 +Connector_PinHeader_2.00mm +PinHeader_1x13_P2.00mm_Vertical +Through hole straight pin header, 1x13, 2.00mm pitch, single row +Through hole pin header THT 1x13 2.00mm single row +0 +13 +13 +Connector_PinHeader_2.00mm +PinHeader_1x13_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x13, 2.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x13 2.00mm single row style1 pin1 left +0 +13 +13 +Connector_PinHeader_2.00mm +PinHeader_1x13_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x13, 2.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x13 2.00mm single row style2 pin1 right +0 +13 +13 +Connector_PinHeader_2.00mm +PinHeader_1x14_P2.00mm_Horizontal +Through hole angled pin header, 1x14, 2.00mm pitch, 4.2mm pin length, single row +Through hole angled pin header THT 1x14 2.00mm single row +0 +14 +14 +Connector_PinHeader_2.00mm +PinHeader_1x14_P2.00mm_Vertical +Through hole straight pin header, 1x14, 2.00mm pitch, single row +Through hole pin header THT 1x14 2.00mm single row +0 +14 +14 +Connector_PinHeader_2.00mm +PinHeader_1x14_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x14, 2.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x14 2.00mm single row style1 pin1 left +0 +14 +14 +Connector_PinHeader_2.00mm +PinHeader_1x14_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x14, 2.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x14 2.00mm single row style2 pin1 right +0 +14 +14 +Connector_PinHeader_2.00mm +PinHeader_1x15_P2.00mm_Horizontal +Through hole angled pin header, 1x15, 2.00mm pitch, 4.2mm pin length, single row +Through hole angled pin header THT 1x15 2.00mm single row +0 +15 +15 +Connector_PinHeader_2.00mm +PinHeader_1x15_P2.00mm_Vertical +Through hole straight pin header, 1x15, 2.00mm pitch, single row +Through hole pin header THT 1x15 2.00mm single row +0 +15 +15 +Connector_PinHeader_2.00mm +PinHeader_1x15_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x15, 2.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x15 2.00mm single row style1 pin1 left +0 +15 +15 +Connector_PinHeader_2.00mm +PinHeader_1x15_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x15, 2.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x15 2.00mm single row style2 pin1 right +0 +15 +15 +Connector_PinHeader_2.00mm +PinHeader_1x16_P2.00mm_Horizontal +Through hole angled pin header, 1x16, 2.00mm pitch, 4.2mm pin length, single row +Through hole angled pin header THT 1x16 2.00mm single row +0 +16 +16 +Connector_PinHeader_2.00mm +PinHeader_1x16_P2.00mm_Vertical +Through hole straight pin header, 1x16, 2.00mm pitch, single row +Through hole pin header THT 1x16 2.00mm single row +0 +16 +16 +Connector_PinHeader_2.00mm +PinHeader_1x16_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x16, 2.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x16 2.00mm single row style1 pin1 left +0 +16 +16 +Connector_PinHeader_2.00mm +PinHeader_1x16_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x16, 2.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x16 2.00mm single row style2 pin1 right +0 +16 +16 +Connector_PinHeader_2.00mm +PinHeader_1x17_P2.00mm_Horizontal +Through hole angled pin header, 1x17, 2.00mm pitch, 4.2mm pin length, single row +Through hole angled pin header THT 1x17 2.00mm single row +0 +17 +17 +Connector_PinHeader_2.00mm +PinHeader_1x17_P2.00mm_Vertical +Through hole straight pin header, 1x17, 2.00mm pitch, single row +Through hole pin header THT 1x17 2.00mm single row +0 +17 +17 +Connector_PinHeader_2.00mm +PinHeader_1x17_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x17, 2.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x17 2.00mm single row style1 pin1 left +0 +17 +17 +Connector_PinHeader_2.00mm +PinHeader_1x17_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x17, 2.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x17 2.00mm single row style2 pin1 right +0 +17 +17 +Connector_PinHeader_2.00mm +PinHeader_1x18_P2.00mm_Horizontal +Through hole angled pin header, 1x18, 2.00mm pitch, 4.2mm pin length, single row +Through hole angled pin header THT 1x18 2.00mm single row +0 +18 +18 +Connector_PinHeader_2.00mm +PinHeader_1x18_P2.00mm_Vertical +Through hole straight pin header, 1x18, 2.00mm pitch, single row +Through hole pin header THT 1x18 2.00mm single row +0 +18 +18 +Connector_PinHeader_2.00mm +PinHeader_1x18_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x18, 2.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x18 2.00mm single row style1 pin1 left +0 +18 +18 +Connector_PinHeader_2.00mm +PinHeader_1x18_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x18, 2.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x18 2.00mm single row style2 pin1 right +0 +18 +18 +Connector_PinHeader_2.00mm +PinHeader_1x19_P2.00mm_Horizontal +Through hole angled pin header, 1x19, 2.00mm pitch, 4.2mm pin length, single row +Through hole angled pin header THT 1x19 2.00mm single row +0 +19 +19 +Connector_PinHeader_2.00mm +PinHeader_1x19_P2.00mm_Vertical +Through hole straight pin header, 1x19, 2.00mm pitch, single row +Through hole pin header THT 1x19 2.00mm single row +0 +19 +19 +Connector_PinHeader_2.00mm +PinHeader_1x19_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x19, 2.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x19 2.00mm single row style1 pin1 left +0 +19 +19 +Connector_PinHeader_2.00mm +PinHeader_1x19_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x19, 2.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x19 2.00mm single row style2 pin1 right +0 +19 +19 +Connector_PinHeader_2.00mm +PinHeader_1x20_P2.00mm_Horizontal +Through hole angled pin header, 1x20, 2.00mm pitch, 4.2mm pin length, single row +Through hole angled pin header THT 1x20 2.00mm single row +0 +20 +20 +Connector_PinHeader_2.00mm +PinHeader_1x20_P2.00mm_Vertical +Through hole straight pin header, 1x20, 2.00mm pitch, single row +Through hole pin header THT 1x20 2.00mm single row +0 +20 +20 +Connector_PinHeader_2.00mm +PinHeader_1x20_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x20, 2.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x20 2.00mm single row style1 pin1 left +0 +20 +20 +Connector_PinHeader_2.00mm +PinHeader_1x20_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x20, 2.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x20 2.00mm single row style2 pin1 right +0 +20 +20 +Connector_PinHeader_2.00mm +PinHeader_1x21_P2.00mm_Horizontal +Through hole angled pin header, 1x21, 2.00mm pitch, 4.2mm pin length, single row +Through hole angled pin header THT 1x21 2.00mm single row +0 +21 +21 +Connector_PinHeader_2.00mm +PinHeader_1x21_P2.00mm_Vertical +Through hole straight pin header, 1x21, 2.00mm pitch, single row +Through hole pin header THT 1x21 2.00mm single row +0 +21 +21 +Connector_PinHeader_2.00mm +PinHeader_1x21_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x21, 2.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x21 2.00mm single row style1 pin1 left +0 +21 +21 +Connector_PinHeader_2.00mm +PinHeader_1x21_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x21, 2.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x21 2.00mm single row style2 pin1 right +0 +21 +21 +Connector_PinHeader_2.00mm +PinHeader_1x22_P2.00mm_Horizontal +Through hole angled pin header, 1x22, 2.00mm pitch, 4.2mm pin length, single row +Through hole angled pin header THT 1x22 2.00mm single row +0 +22 +22 +Connector_PinHeader_2.00mm +PinHeader_1x22_P2.00mm_Vertical +Through hole straight pin header, 1x22, 2.00mm pitch, single row +Through hole pin header THT 1x22 2.00mm single row +0 +22 +22 +Connector_PinHeader_2.00mm +PinHeader_1x22_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x22, 2.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x22 2.00mm single row style1 pin1 left +0 +22 +22 +Connector_PinHeader_2.00mm +PinHeader_1x22_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x22, 2.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x22 2.00mm single row style2 pin1 right +0 +22 +22 +Connector_PinHeader_2.00mm +PinHeader_1x23_P2.00mm_Horizontal +Through hole angled pin header, 1x23, 2.00mm pitch, 4.2mm pin length, single row +Through hole angled pin header THT 1x23 2.00mm single row +0 +23 +23 +Connector_PinHeader_2.00mm +PinHeader_1x23_P2.00mm_Vertical +Through hole straight pin header, 1x23, 2.00mm pitch, single row +Through hole pin header THT 1x23 2.00mm single row +0 +23 +23 +Connector_PinHeader_2.00mm +PinHeader_1x23_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x23, 2.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x23 2.00mm single row style1 pin1 left +0 +23 +23 +Connector_PinHeader_2.00mm +PinHeader_1x23_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x23, 2.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x23 2.00mm single row style2 pin1 right +0 +23 +23 +Connector_PinHeader_2.00mm +PinHeader_1x24_P2.00mm_Horizontal +Through hole angled pin header, 1x24, 2.00mm pitch, 4.2mm pin length, single row +Through hole angled pin header THT 1x24 2.00mm single row +0 +24 +24 +Connector_PinHeader_2.00mm +PinHeader_1x24_P2.00mm_Vertical +Through hole straight pin header, 1x24, 2.00mm pitch, single row +Through hole pin header THT 1x24 2.00mm single row +0 +24 +24 +Connector_PinHeader_2.00mm +PinHeader_1x24_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x24, 2.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x24 2.00mm single row style1 pin1 left +0 +24 +24 +Connector_PinHeader_2.00mm +PinHeader_1x24_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x24, 2.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x24 2.00mm single row style2 pin1 right +0 +24 +24 +Connector_PinHeader_2.00mm +PinHeader_1x25_P2.00mm_Horizontal +Through hole angled pin header, 1x25, 2.00mm pitch, 4.2mm pin length, single row +Through hole angled pin header THT 1x25 2.00mm single row +0 +25 +25 +Connector_PinHeader_2.00mm +PinHeader_1x25_P2.00mm_Vertical +Through hole straight pin header, 1x25, 2.00mm pitch, single row +Through hole pin header THT 1x25 2.00mm single row +0 +25 +25 +Connector_PinHeader_2.00mm +PinHeader_1x25_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x25, 2.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x25 2.00mm single row style1 pin1 left +0 +25 +25 +Connector_PinHeader_2.00mm +PinHeader_1x25_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x25, 2.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x25 2.00mm single row style2 pin1 right +0 +25 +25 +Connector_PinHeader_2.00mm +PinHeader_1x26_P2.00mm_Horizontal +Through hole angled pin header, 1x26, 2.00mm pitch, 4.2mm pin length, single row +Through hole angled pin header THT 1x26 2.00mm single row +0 +26 +26 +Connector_PinHeader_2.00mm +PinHeader_1x26_P2.00mm_Vertical +Through hole straight pin header, 1x26, 2.00mm pitch, single row +Through hole pin header THT 1x26 2.00mm single row +0 +26 +26 +Connector_PinHeader_2.00mm +PinHeader_1x26_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x26, 2.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x26 2.00mm single row style1 pin1 left +0 +26 +26 +Connector_PinHeader_2.00mm +PinHeader_1x26_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x26, 2.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x26 2.00mm single row style2 pin1 right +0 +26 +26 +Connector_PinHeader_2.00mm +PinHeader_1x27_P2.00mm_Horizontal +Through hole angled pin header, 1x27, 2.00mm pitch, 4.2mm pin length, single row +Through hole angled pin header THT 1x27 2.00mm single row +0 +27 +27 +Connector_PinHeader_2.00mm +PinHeader_1x27_P2.00mm_Vertical +Through hole straight pin header, 1x27, 2.00mm pitch, single row +Through hole pin header THT 1x27 2.00mm single row +0 +27 +27 +Connector_PinHeader_2.00mm +PinHeader_1x27_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x27, 2.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x27 2.00mm single row style1 pin1 left +0 +27 +27 +Connector_PinHeader_2.00mm +PinHeader_1x27_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x27, 2.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x27 2.00mm single row style2 pin1 right +0 +27 +27 +Connector_PinHeader_2.00mm +PinHeader_1x28_P2.00mm_Horizontal +Through hole angled pin header, 1x28, 2.00mm pitch, 4.2mm pin length, single row +Through hole angled pin header THT 1x28 2.00mm single row +0 +28 +28 +Connector_PinHeader_2.00mm +PinHeader_1x28_P2.00mm_Vertical +Through hole straight pin header, 1x28, 2.00mm pitch, single row +Through hole pin header THT 1x28 2.00mm single row +0 +28 +28 +Connector_PinHeader_2.00mm +PinHeader_1x28_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x28, 2.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x28 2.00mm single row style1 pin1 left +0 +28 +28 +Connector_PinHeader_2.00mm +PinHeader_1x28_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x28, 2.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x28 2.00mm single row style2 pin1 right +0 +28 +28 +Connector_PinHeader_2.00mm +PinHeader_1x29_P2.00mm_Horizontal +Through hole angled pin header, 1x29, 2.00mm pitch, 4.2mm pin length, single row +Through hole angled pin header THT 1x29 2.00mm single row +0 +29 +29 +Connector_PinHeader_2.00mm +PinHeader_1x29_P2.00mm_Vertical +Through hole straight pin header, 1x29, 2.00mm pitch, single row +Through hole pin header THT 1x29 2.00mm single row +0 +29 +29 +Connector_PinHeader_2.00mm +PinHeader_1x29_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x29, 2.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x29 2.00mm single row style1 pin1 left +0 +29 +29 +Connector_PinHeader_2.00mm +PinHeader_1x29_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x29, 2.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x29 2.00mm single row style2 pin1 right +0 +29 +29 +Connector_PinHeader_2.00mm +PinHeader_1x30_P2.00mm_Horizontal +Through hole angled pin header, 1x30, 2.00mm pitch, 4.2mm pin length, single row +Through hole angled pin header THT 1x30 2.00mm single row +0 +30 +30 +Connector_PinHeader_2.00mm +PinHeader_1x30_P2.00mm_Vertical +Through hole straight pin header, 1x30, 2.00mm pitch, single row +Through hole pin header THT 1x30 2.00mm single row +0 +30 +30 +Connector_PinHeader_2.00mm +PinHeader_1x30_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x30, 2.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x30 2.00mm single row style1 pin1 left +0 +30 +30 +Connector_PinHeader_2.00mm +PinHeader_1x30_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x30, 2.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x30 2.00mm single row style2 pin1 right +0 +30 +30 +Connector_PinHeader_2.00mm +PinHeader_1x31_P2.00mm_Horizontal +Through hole angled pin header, 1x31, 2.00mm pitch, 4.2mm pin length, single row +Through hole angled pin header THT 1x31 2.00mm single row +0 +31 +31 +Connector_PinHeader_2.00mm +PinHeader_1x31_P2.00mm_Vertical +Through hole straight pin header, 1x31, 2.00mm pitch, single row +Through hole pin header THT 1x31 2.00mm single row +0 +31 +31 +Connector_PinHeader_2.00mm +PinHeader_1x31_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x31, 2.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x31 2.00mm single row style1 pin1 left +0 +31 +31 +Connector_PinHeader_2.00mm +PinHeader_1x31_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x31, 2.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x31 2.00mm single row style2 pin1 right +0 +31 +31 +Connector_PinHeader_2.00mm +PinHeader_1x32_P2.00mm_Horizontal +Through hole angled pin header, 1x32, 2.00mm pitch, 4.2mm pin length, single row +Through hole angled pin header THT 1x32 2.00mm single row +0 +32 +32 +Connector_PinHeader_2.00mm +PinHeader_1x32_P2.00mm_Vertical +Through hole straight pin header, 1x32, 2.00mm pitch, single row +Through hole pin header THT 1x32 2.00mm single row +0 +32 +32 +Connector_PinHeader_2.00mm +PinHeader_1x32_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x32, 2.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x32 2.00mm single row style1 pin1 left +0 +32 +32 +Connector_PinHeader_2.00mm +PinHeader_1x32_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x32, 2.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x32 2.00mm single row style2 pin1 right +0 +32 +32 +Connector_PinHeader_2.00mm +PinHeader_1x33_P2.00mm_Horizontal +Through hole angled pin header, 1x33, 2.00mm pitch, 4.2mm pin length, single row +Through hole angled pin header THT 1x33 2.00mm single row +0 +33 +33 +Connector_PinHeader_2.00mm +PinHeader_1x33_P2.00mm_Vertical +Through hole straight pin header, 1x33, 2.00mm pitch, single row +Through hole pin header THT 1x33 2.00mm single row +0 +33 +33 +Connector_PinHeader_2.00mm +PinHeader_1x33_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x33, 2.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x33 2.00mm single row style1 pin1 left +0 +33 +33 +Connector_PinHeader_2.00mm +PinHeader_1x33_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x33, 2.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x33 2.00mm single row style2 pin1 right +0 +33 +33 +Connector_PinHeader_2.00mm +PinHeader_1x34_P2.00mm_Horizontal +Through hole angled pin header, 1x34, 2.00mm pitch, 4.2mm pin length, single row +Through hole angled pin header THT 1x34 2.00mm single row +0 +34 +34 +Connector_PinHeader_2.00mm +PinHeader_1x34_P2.00mm_Vertical +Through hole straight pin header, 1x34, 2.00mm pitch, single row +Through hole pin header THT 1x34 2.00mm single row +0 +34 +34 +Connector_PinHeader_2.00mm +PinHeader_1x34_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x34, 2.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x34 2.00mm single row style1 pin1 left +0 +34 +34 +Connector_PinHeader_2.00mm +PinHeader_1x34_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x34, 2.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x34 2.00mm single row style2 pin1 right +0 +34 +34 +Connector_PinHeader_2.00mm +PinHeader_1x35_P2.00mm_Horizontal +Through hole angled pin header, 1x35, 2.00mm pitch, 4.2mm pin length, single row +Through hole angled pin header THT 1x35 2.00mm single row +0 +35 +35 +Connector_PinHeader_2.00mm +PinHeader_1x35_P2.00mm_Vertical +Through hole straight pin header, 1x35, 2.00mm pitch, single row +Through hole pin header THT 1x35 2.00mm single row +0 +35 +35 +Connector_PinHeader_2.00mm +PinHeader_1x35_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x35, 2.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x35 2.00mm single row style1 pin1 left +0 +35 +35 +Connector_PinHeader_2.00mm +PinHeader_1x35_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x35, 2.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x35 2.00mm single row style2 pin1 right +0 +35 +35 +Connector_PinHeader_2.00mm +PinHeader_1x36_P2.00mm_Horizontal +Through hole angled pin header, 1x36, 2.00mm pitch, 4.2mm pin length, single row +Through hole angled pin header THT 1x36 2.00mm single row +0 +36 +36 +Connector_PinHeader_2.00mm +PinHeader_1x36_P2.00mm_Vertical +Through hole straight pin header, 1x36, 2.00mm pitch, single row +Through hole pin header THT 1x36 2.00mm single row +0 +36 +36 +Connector_PinHeader_2.00mm +PinHeader_1x36_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x36, 2.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x36 2.00mm single row style1 pin1 left +0 +36 +36 +Connector_PinHeader_2.00mm +PinHeader_1x36_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x36, 2.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x36 2.00mm single row style2 pin1 right +0 +36 +36 +Connector_PinHeader_2.00mm +PinHeader_1x37_P2.00mm_Horizontal +Through hole angled pin header, 1x37, 2.00mm pitch, 4.2mm pin length, single row +Through hole angled pin header THT 1x37 2.00mm single row +0 +37 +37 +Connector_PinHeader_2.00mm +PinHeader_1x37_P2.00mm_Vertical +Through hole straight pin header, 1x37, 2.00mm pitch, single row +Through hole pin header THT 1x37 2.00mm single row +0 +37 +37 +Connector_PinHeader_2.00mm +PinHeader_1x37_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x37, 2.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x37 2.00mm single row style1 pin1 left +0 +37 +37 +Connector_PinHeader_2.00mm +PinHeader_1x37_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x37, 2.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x37 2.00mm single row style2 pin1 right +0 +37 +37 +Connector_PinHeader_2.00mm +PinHeader_1x38_P2.00mm_Horizontal +Through hole angled pin header, 1x38, 2.00mm pitch, 4.2mm pin length, single row +Through hole angled pin header THT 1x38 2.00mm single row +0 +38 +38 +Connector_PinHeader_2.00mm +PinHeader_1x38_P2.00mm_Vertical +Through hole straight pin header, 1x38, 2.00mm pitch, single row +Through hole pin header THT 1x38 2.00mm single row +0 +38 +38 +Connector_PinHeader_2.00mm +PinHeader_1x38_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x38, 2.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x38 2.00mm single row style1 pin1 left +0 +38 +38 +Connector_PinHeader_2.00mm +PinHeader_1x38_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x38, 2.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x38 2.00mm single row style2 pin1 right +0 +38 +38 +Connector_PinHeader_2.00mm +PinHeader_1x39_P2.00mm_Horizontal +Through hole angled pin header, 1x39, 2.00mm pitch, 4.2mm pin length, single row +Through hole angled pin header THT 1x39 2.00mm single row +0 +39 +39 +Connector_PinHeader_2.00mm +PinHeader_1x39_P2.00mm_Vertical +Through hole straight pin header, 1x39, 2.00mm pitch, single row +Through hole pin header THT 1x39 2.00mm single row +0 +39 +39 +Connector_PinHeader_2.00mm +PinHeader_1x39_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x39, 2.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x39 2.00mm single row style1 pin1 left +0 +39 +39 +Connector_PinHeader_2.00mm +PinHeader_1x39_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x39, 2.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x39 2.00mm single row style2 pin1 right +0 +39 +39 +Connector_PinHeader_2.00mm +PinHeader_1x40_P2.00mm_Horizontal +Through hole angled pin header, 1x40, 2.00mm pitch, 4.2mm pin length, single row +Through hole angled pin header THT 1x40 2.00mm single row +0 +40 +40 +Connector_PinHeader_2.00mm +PinHeader_1x40_P2.00mm_Vertical +Through hole straight pin header, 1x40, 2.00mm pitch, single row +Through hole pin header THT 1x40 2.00mm single row +0 +40 +40 +Connector_PinHeader_2.00mm +PinHeader_1x40_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x40, 2.00mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x40 2.00mm single row style1 pin1 left +0 +40 +40 +Connector_PinHeader_2.00mm +PinHeader_1x40_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x40, 2.00mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x40 2.00mm single row style2 pin1 right +0 +40 +40 +Connector_PinHeader_2.00mm +PinHeader_2x01_P2.00mm_Horizontal +Through hole angled pin header, 2x01, 2.00mm pitch, 4.2mm pin length, double rows +Through hole angled pin header THT 2x01 2.00mm double row +0 +2 +2 +Connector_PinHeader_2.00mm +PinHeader_2x01_P2.00mm_Vertical +Through hole straight pin header, 2x01, 2.00mm pitch, double rows +Through hole pin header THT 2x01 2.00mm double row +0 +2 +2 +Connector_PinHeader_2.00mm +PinHeader_2x01_P2.00mm_Vertical_SMD +surface-mounted straight pin header, 2x01, 2.00mm pitch, double rows +Surface mounted pin header SMD 2x01 2.00mm double row +0 +2 +2 +Connector_PinHeader_2.00mm +PinHeader_2x02_P2.00mm_Horizontal +Through hole angled pin header, 2x02, 2.00mm pitch, 4.2mm pin length, double rows +Through hole angled pin header THT 2x02 2.00mm double row +0 +4 +4 +Connector_PinHeader_2.00mm +PinHeader_2x02_P2.00mm_Vertical +Through hole straight pin header, 2x02, 2.00mm pitch, double rows +Through hole pin header THT 2x02 2.00mm double row +0 +4 +4 +Connector_PinHeader_2.00mm +PinHeader_2x02_P2.00mm_Vertical_SMD +surface-mounted straight pin header, 2x02, 2.00mm pitch, double rows +Surface mounted pin header SMD 2x02 2.00mm double row +0 +4 +4 +Connector_PinHeader_2.00mm +PinHeader_2x03_P2.00mm_Horizontal +Through hole angled pin header, 2x03, 2.00mm pitch, 4.2mm pin length, double rows +Through hole angled pin header THT 2x03 2.00mm double row +0 +6 +6 +Connector_PinHeader_2.00mm +PinHeader_2x03_P2.00mm_Vertical +Through hole straight pin header, 2x03, 2.00mm pitch, double rows +Through hole pin header THT 2x03 2.00mm double row +0 +6 +6 +Connector_PinHeader_2.00mm +PinHeader_2x03_P2.00mm_Vertical_SMD +surface-mounted straight pin header, 2x03, 2.00mm pitch, double rows +Surface mounted pin header SMD 2x03 2.00mm double row +0 +6 +6 +Connector_PinHeader_2.00mm +PinHeader_2x04_P2.00mm_Horizontal +Through hole angled pin header, 2x04, 2.00mm pitch, 4.2mm pin length, double rows +Through hole angled pin header THT 2x04 2.00mm double row +0 +8 +8 +Connector_PinHeader_2.00mm +PinHeader_2x04_P2.00mm_Vertical +Through hole straight pin header, 2x04, 2.00mm pitch, double rows +Through hole pin header THT 2x04 2.00mm double row +0 +8 +8 +Connector_PinHeader_2.00mm +PinHeader_2x04_P2.00mm_Vertical_SMD +surface-mounted straight pin header, 2x04, 2.00mm pitch, double rows +Surface mounted pin header SMD 2x04 2.00mm double row +0 +8 +8 +Connector_PinHeader_2.00mm +PinHeader_2x05_P2.00mm_Horizontal +Through hole angled pin header, 2x05, 2.00mm pitch, 4.2mm pin length, double rows +Through hole angled pin header THT 2x05 2.00mm double row +0 +10 +10 +Connector_PinHeader_2.00mm +PinHeader_2x05_P2.00mm_Vertical +Through hole straight pin header, 2x05, 2.00mm pitch, double rows +Through hole pin header THT 2x05 2.00mm double row +0 +10 +10 +Connector_PinHeader_2.00mm +PinHeader_2x05_P2.00mm_Vertical_SMD +surface-mounted straight pin header, 2x05, 2.00mm pitch, double rows +Surface mounted pin header SMD 2x05 2.00mm double row +0 +10 +10 +Connector_PinHeader_2.00mm +PinHeader_2x06_P2.00mm_Horizontal +Through hole angled pin header, 2x06, 2.00mm pitch, 4.2mm pin length, double rows +Through hole angled pin header THT 2x06 2.00mm double row +0 +12 +12 +Connector_PinHeader_2.00mm +PinHeader_2x06_P2.00mm_Vertical +Through hole straight pin header, 2x06, 2.00mm pitch, double rows +Through hole pin header THT 2x06 2.00mm double row +0 +12 +12 +Connector_PinHeader_2.00mm +PinHeader_2x06_P2.00mm_Vertical_SMD +surface-mounted straight pin header, 2x06, 2.00mm pitch, double rows +Surface mounted pin header SMD 2x06 2.00mm double row +0 +12 +12 +Connector_PinHeader_2.00mm +PinHeader_2x07_P2.00mm_Horizontal +Through hole angled pin header, 2x07, 2.00mm pitch, 4.2mm pin length, double rows +Through hole angled pin header THT 2x07 2.00mm double row +0 +14 +14 +Connector_PinHeader_2.00mm +PinHeader_2x07_P2.00mm_Vertical +Through hole straight pin header, 2x07, 2.00mm pitch, double rows +Through hole pin header THT 2x07 2.00mm double row +0 +14 +14 +Connector_PinHeader_2.00mm +PinHeader_2x07_P2.00mm_Vertical_SMD +surface-mounted straight pin header, 2x07, 2.00mm pitch, double rows +Surface mounted pin header SMD 2x07 2.00mm double row +0 +14 +14 +Connector_PinHeader_2.00mm +PinHeader_2x08_P2.00mm_Horizontal +Through hole angled pin header, 2x08, 2.00mm pitch, 4.2mm pin length, double rows +Through hole angled pin header THT 2x08 2.00mm double row +0 +16 +16 +Connector_PinHeader_2.00mm +PinHeader_2x08_P2.00mm_Vertical +Through hole straight pin header, 2x08, 2.00mm pitch, double rows +Through hole pin header THT 2x08 2.00mm double row +0 +16 +16 +Connector_PinHeader_2.00mm +PinHeader_2x08_P2.00mm_Vertical_SMD +surface-mounted straight pin header, 2x08, 2.00mm pitch, double rows +Surface mounted pin header SMD 2x08 2.00mm double row +0 +16 +16 +Connector_PinHeader_2.00mm +PinHeader_2x09_P2.00mm_Horizontal +Through hole angled pin header, 2x09, 2.00mm pitch, 4.2mm pin length, double rows +Through hole angled pin header THT 2x09 2.00mm double row +0 +18 +18 +Connector_PinHeader_2.00mm +PinHeader_2x09_P2.00mm_Vertical +Through hole straight pin header, 2x09, 2.00mm pitch, double rows +Through hole pin header THT 2x09 2.00mm double row +0 +18 +18 +Connector_PinHeader_2.00mm +PinHeader_2x09_P2.00mm_Vertical_SMD +surface-mounted straight pin header, 2x09, 2.00mm pitch, double rows +Surface mounted pin header SMD 2x09 2.00mm double row +0 +18 +18 +Connector_PinHeader_2.00mm +PinHeader_2x10_P2.00mm_Horizontal +Through hole angled pin header, 2x10, 2.00mm pitch, 4.2mm pin length, double rows +Through hole angled pin header THT 2x10 2.00mm double row +0 +20 +20 +Connector_PinHeader_2.00mm +PinHeader_2x10_P2.00mm_Vertical +Through hole straight pin header, 2x10, 2.00mm pitch, double rows +Through hole pin header THT 2x10 2.00mm double row +0 +20 +20 +Connector_PinHeader_2.00mm +PinHeader_2x10_P2.00mm_Vertical_SMD +surface-mounted straight pin header, 2x10, 2.00mm pitch, double rows +Surface mounted pin header SMD 2x10 2.00mm double row +0 +20 +20 +Connector_PinHeader_2.00mm +PinHeader_2x11_P2.00mm_Horizontal +Through hole angled pin header, 2x11, 2.00mm pitch, 4.2mm pin length, double rows +Through hole angled pin header THT 2x11 2.00mm double row +0 +22 +22 +Connector_PinHeader_2.00mm +PinHeader_2x11_P2.00mm_Vertical +Through hole straight pin header, 2x11, 2.00mm pitch, double rows +Through hole pin header THT 2x11 2.00mm double row +0 +22 +22 +Connector_PinHeader_2.00mm +PinHeader_2x11_P2.00mm_Vertical_SMD +surface-mounted straight pin header, 2x11, 2.00mm pitch, double rows +Surface mounted pin header SMD 2x11 2.00mm double row +0 +22 +22 +Connector_PinHeader_2.00mm +PinHeader_2x12_P2.00mm_Horizontal +Through hole angled pin header, 2x12, 2.00mm pitch, 4.2mm pin length, double rows +Through hole angled pin header THT 2x12 2.00mm double row +0 +24 +24 +Connector_PinHeader_2.00mm +PinHeader_2x12_P2.00mm_Vertical +Through hole straight pin header, 2x12, 2.00mm pitch, double rows +Through hole pin header THT 2x12 2.00mm double row +0 +24 +24 +Connector_PinHeader_2.00mm +PinHeader_2x12_P2.00mm_Vertical_SMD +surface-mounted straight pin header, 2x12, 2.00mm pitch, double rows +Surface mounted pin header SMD 2x12 2.00mm double row +0 +24 +24 +Connector_PinHeader_2.00mm +PinHeader_2x13_P2.00mm_Horizontal +Through hole angled pin header, 2x13, 2.00mm pitch, 4.2mm pin length, double rows +Through hole angled pin header THT 2x13 2.00mm double row +0 +26 +26 +Connector_PinHeader_2.00mm +PinHeader_2x13_P2.00mm_Vertical +Through hole straight pin header, 2x13, 2.00mm pitch, double rows +Through hole pin header THT 2x13 2.00mm double row +0 +26 +26 +Connector_PinHeader_2.00mm +PinHeader_2x13_P2.00mm_Vertical_SMD +surface-mounted straight pin header, 2x13, 2.00mm pitch, double rows +Surface mounted pin header SMD 2x13 2.00mm double row +0 +26 +26 +Connector_PinHeader_2.00mm +PinHeader_2x14_P2.00mm_Horizontal +Through hole angled pin header, 2x14, 2.00mm pitch, 4.2mm pin length, double rows +Through hole angled pin header THT 2x14 2.00mm double row +0 +28 +28 +Connector_PinHeader_2.00mm +PinHeader_2x14_P2.00mm_Vertical +Through hole straight pin header, 2x14, 2.00mm pitch, double rows +Through hole pin header THT 2x14 2.00mm double row +0 +28 +28 +Connector_PinHeader_2.00mm +PinHeader_2x14_P2.00mm_Vertical_SMD +surface-mounted straight pin header, 2x14, 2.00mm pitch, double rows +Surface mounted pin header SMD 2x14 2.00mm double row +0 +28 +28 +Connector_PinHeader_2.00mm +PinHeader_2x15_P2.00mm_Horizontal +Through hole angled pin header, 2x15, 2.00mm pitch, 4.2mm pin length, double rows +Through hole angled pin header THT 2x15 2.00mm double row +0 +30 +30 +Connector_PinHeader_2.00mm +PinHeader_2x15_P2.00mm_Vertical +Through hole straight pin header, 2x15, 2.00mm pitch, double rows +Through hole pin header THT 2x15 2.00mm double row +0 +30 +30 +Connector_PinHeader_2.00mm +PinHeader_2x15_P2.00mm_Vertical_SMD +surface-mounted straight pin header, 2x15, 2.00mm pitch, double rows +Surface mounted pin header SMD 2x15 2.00mm double row +0 +30 +30 +Connector_PinHeader_2.00mm +PinHeader_2x16_P2.00mm_Horizontal +Through hole angled pin header, 2x16, 2.00mm pitch, 4.2mm pin length, double rows +Through hole angled pin header THT 2x16 2.00mm double row +0 +32 +32 +Connector_PinHeader_2.00mm +PinHeader_2x16_P2.00mm_Vertical +Through hole straight pin header, 2x16, 2.00mm pitch, double rows +Through hole pin header THT 2x16 2.00mm double row +0 +32 +32 +Connector_PinHeader_2.00mm +PinHeader_2x16_P2.00mm_Vertical_SMD +surface-mounted straight pin header, 2x16, 2.00mm pitch, double rows +Surface mounted pin header SMD 2x16 2.00mm double row +0 +32 +32 +Connector_PinHeader_2.00mm +PinHeader_2x17_P2.00mm_Horizontal +Through hole angled pin header, 2x17, 2.00mm pitch, 4.2mm pin length, double rows +Through hole angled pin header THT 2x17 2.00mm double row +0 +34 +34 +Connector_PinHeader_2.00mm +PinHeader_2x17_P2.00mm_Vertical +Through hole straight pin header, 2x17, 2.00mm pitch, double rows +Through hole pin header THT 2x17 2.00mm double row +0 +34 +34 +Connector_PinHeader_2.00mm +PinHeader_2x17_P2.00mm_Vertical_SMD +surface-mounted straight pin header, 2x17, 2.00mm pitch, double rows +Surface mounted pin header SMD 2x17 2.00mm double row +0 +34 +34 +Connector_PinHeader_2.00mm +PinHeader_2x18_P2.00mm_Horizontal +Through hole angled pin header, 2x18, 2.00mm pitch, 4.2mm pin length, double rows +Through hole angled pin header THT 2x18 2.00mm double row +0 +36 +36 +Connector_PinHeader_2.00mm +PinHeader_2x18_P2.00mm_Vertical +Through hole straight pin header, 2x18, 2.00mm pitch, double rows +Through hole pin header THT 2x18 2.00mm double row +0 +36 +36 +Connector_PinHeader_2.00mm +PinHeader_2x18_P2.00mm_Vertical_SMD +surface-mounted straight pin header, 2x18, 2.00mm pitch, double rows +Surface mounted pin header SMD 2x18 2.00mm double row +0 +36 +36 +Connector_PinHeader_2.00mm +PinHeader_2x19_P2.00mm_Horizontal +Through hole angled pin header, 2x19, 2.00mm pitch, 4.2mm pin length, double rows +Through hole angled pin header THT 2x19 2.00mm double row +0 +38 +38 +Connector_PinHeader_2.00mm +PinHeader_2x19_P2.00mm_Vertical +Through hole straight pin header, 2x19, 2.00mm pitch, double rows +Through hole pin header THT 2x19 2.00mm double row +0 +38 +38 +Connector_PinHeader_2.00mm +PinHeader_2x19_P2.00mm_Vertical_SMD +surface-mounted straight pin header, 2x19, 2.00mm pitch, double rows +Surface mounted pin header SMD 2x19 2.00mm double row +0 +38 +38 +Connector_PinHeader_2.00mm +PinHeader_2x20_P2.00mm_Horizontal +Through hole angled pin header, 2x20, 2.00mm pitch, 4.2mm pin length, double rows +Through hole angled pin header THT 2x20 2.00mm double row +0 +40 +40 +Connector_PinHeader_2.00mm +PinHeader_2x20_P2.00mm_Vertical +Through hole straight pin header, 2x20, 2.00mm pitch, double rows +Through hole pin header THT 2x20 2.00mm double row +0 +40 +40 +Connector_PinHeader_2.00mm +PinHeader_2x20_P2.00mm_Vertical_SMD +surface-mounted straight pin header, 2x20, 2.00mm pitch, double rows +Surface mounted pin header SMD 2x20 2.00mm double row +0 +40 +40 +Connector_PinHeader_2.00mm +PinHeader_2x21_P2.00mm_Horizontal +Through hole angled pin header, 2x21, 2.00mm pitch, 4.2mm pin length, double rows +Through hole angled pin header THT 2x21 2.00mm double row +0 +42 +42 +Connector_PinHeader_2.00mm +PinHeader_2x21_P2.00mm_Vertical +Through hole straight pin header, 2x21, 2.00mm pitch, double rows +Through hole pin header THT 2x21 2.00mm double row +0 +42 +42 +Connector_PinHeader_2.00mm +PinHeader_2x21_P2.00mm_Vertical_SMD +surface-mounted straight pin header, 2x21, 2.00mm pitch, double rows +Surface mounted pin header SMD 2x21 2.00mm double row +0 +42 +42 +Connector_PinHeader_2.00mm +PinHeader_2x22_P2.00mm_Horizontal +Through hole angled pin header, 2x22, 2.00mm pitch, 4.2mm pin length, double rows +Through hole angled pin header THT 2x22 2.00mm double row +0 +44 +44 +Connector_PinHeader_2.00mm +PinHeader_2x22_P2.00mm_Vertical +Through hole straight pin header, 2x22, 2.00mm pitch, double rows +Through hole pin header THT 2x22 2.00mm double row +0 +44 +44 +Connector_PinHeader_2.00mm +PinHeader_2x22_P2.00mm_Vertical_SMD +surface-mounted straight pin header, 2x22, 2.00mm pitch, double rows +Surface mounted pin header SMD 2x22 2.00mm double row +0 +44 +44 +Connector_PinHeader_2.00mm +PinHeader_2x23_P2.00mm_Horizontal +Through hole angled pin header, 2x23, 2.00mm pitch, 4.2mm pin length, double rows +Through hole angled pin header THT 2x23 2.00mm double row +0 +46 +46 +Connector_PinHeader_2.00mm +PinHeader_2x23_P2.00mm_Vertical +Through hole straight pin header, 2x23, 2.00mm pitch, double rows +Through hole pin header THT 2x23 2.00mm double row +0 +46 +46 +Connector_PinHeader_2.00mm +PinHeader_2x23_P2.00mm_Vertical_SMD +surface-mounted straight pin header, 2x23, 2.00mm pitch, double rows +Surface mounted pin header SMD 2x23 2.00mm double row +0 +46 +46 +Connector_PinHeader_2.00mm +PinHeader_2x24_P2.00mm_Horizontal +Through hole angled pin header, 2x24, 2.00mm pitch, 4.2mm pin length, double rows +Through hole angled pin header THT 2x24 2.00mm double row +0 +48 +48 +Connector_PinHeader_2.00mm +PinHeader_2x24_P2.00mm_Vertical +Through hole straight pin header, 2x24, 2.00mm pitch, double rows +Through hole pin header THT 2x24 2.00mm double row +0 +48 +48 +Connector_PinHeader_2.00mm +PinHeader_2x24_P2.00mm_Vertical_SMD +surface-mounted straight pin header, 2x24, 2.00mm pitch, double rows +Surface mounted pin header SMD 2x24 2.00mm double row +0 +48 +48 +Connector_PinHeader_2.00mm +PinHeader_2x25_P2.00mm_Horizontal +Through hole angled pin header, 2x25, 2.00mm pitch, 4.2mm pin length, double rows +Through hole angled pin header THT 2x25 2.00mm double row +0 +50 +50 +Connector_PinHeader_2.00mm +PinHeader_2x25_P2.00mm_Vertical +Through hole straight pin header, 2x25, 2.00mm pitch, double rows +Through hole pin header THT 2x25 2.00mm double row +0 +50 +50 +Connector_PinHeader_2.00mm +PinHeader_2x25_P2.00mm_Vertical_SMD +surface-mounted straight pin header, 2x25, 2.00mm pitch, double rows +Surface mounted pin header SMD 2x25 2.00mm double row +0 +50 +50 +Connector_PinHeader_2.00mm +PinHeader_2x26_P2.00mm_Horizontal +Through hole angled pin header, 2x26, 2.00mm pitch, 4.2mm pin length, double rows +Through hole angled pin header THT 2x26 2.00mm double row +0 +52 +52 +Connector_PinHeader_2.00mm +PinHeader_2x26_P2.00mm_Vertical +Through hole straight pin header, 2x26, 2.00mm pitch, double rows +Through hole pin header THT 2x26 2.00mm double row +0 +52 +52 +Connector_PinHeader_2.00mm +PinHeader_2x26_P2.00mm_Vertical_SMD +surface-mounted straight pin header, 2x26, 2.00mm pitch, double rows +Surface mounted pin header SMD 2x26 2.00mm double row +0 +52 +52 +Connector_PinHeader_2.00mm +PinHeader_2x27_P2.00mm_Horizontal +Through hole angled pin header, 2x27, 2.00mm pitch, 4.2mm pin length, double rows +Through hole angled pin header THT 2x27 2.00mm double row +0 +54 +54 +Connector_PinHeader_2.00mm +PinHeader_2x27_P2.00mm_Vertical +Through hole straight pin header, 2x27, 2.00mm pitch, double rows +Through hole pin header THT 2x27 2.00mm double row +0 +54 +54 +Connector_PinHeader_2.00mm +PinHeader_2x27_P2.00mm_Vertical_SMD +surface-mounted straight pin header, 2x27, 2.00mm pitch, double rows +Surface mounted pin header SMD 2x27 2.00mm double row +0 +54 +54 +Connector_PinHeader_2.00mm +PinHeader_2x28_P2.00mm_Horizontal +Through hole angled pin header, 2x28, 2.00mm pitch, 4.2mm pin length, double rows +Through hole angled pin header THT 2x28 2.00mm double row +0 +56 +56 +Connector_PinHeader_2.00mm +PinHeader_2x28_P2.00mm_Vertical +Through hole straight pin header, 2x28, 2.00mm pitch, double rows +Through hole pin header THT 2x28 2.00mm double row +0 +56 +56 +Connector_PinHeader_2.00mm +PinHeader_2x28_P2.00mm_Vertical_SMD +surface-mounted straight pin header, 2x28, 2.00mm pitch, double rows +Surface mounted pin header SMD 2x28 2.00mm double row +0 +56 +56 +Connector_PinHeader_2.00mm +PinHeader_2x29_P2.00mm_Horizontal +Through hole angled pin header, 2x29, 2.00mm pitch, 4.2mm pin length, double rows +Through hole angled pin header THT 2x29 2.00mm double row +0 +58 +58 +Connector_PinHeader_2.00mm +PinHeader_2x29_P2.00mm_Vertical +Through hole straight pin header, 2x29, 2.00mm pitch, double rows +Through hole pin header THT 2x29 2.00mm double row +0 +58 +58 +Connector_PinHeader_2.00mm +PinHeader_2x29_P2.00mm_Vertical_SMD +surface-mounted straight pin header, 2x29, 2.00mm pitch, double rows +Surface mounted pin header SMD 2x29 2.00mm double row +0 +58 +58 +Connector_PinHeader_2.00mm +PinHeader_2x30_P2.00mm_Horizontal +Through hole angled pin header, 2x30, 2.00mm pitch, 4.2mm pin length, double rows +Through hole angled pin header THT 2x30 2.00mm double row +0 +60 +60 +Connector_PinHeader_2.00mm +PinHeader_2x30_P2.00mm_Vertical +Through hole straight pin header, 2x30, 2.00mm pitch, double rows +Through hole pin header THT 2x30 2.00mm double row +0 +60 +60 +Connector_PinHeader_2.00mm +PinHeader_2x30_P2.00mm_Vertical_SMD +surface-mounted straight pin header, 2x30, 2.00mm pitch, double rows +Surface mounted pin header SMD 2x30 2.00mm double row +0 +60 +60 +Connector_PinHeader_2.00mm +PinHeader_2x31_P2.00mm_Horizontal +Through hole angled pin header, 2x31, 2.00mm pitch, 4.2mm pin length, double rows +Through hole angled pin header THT 2x31 2.00mm double row +0 +62 +62 +Connector_PinHeader_2.00mm +PinHeader_2x31_P2.00mm_Vertical +Through hole straight pin header, 2x31, 2.00mm pitch, double rows +Through hole pin header THT 2x31 2.00mm double row +0 +62 +62 +Connector_PinHeader_2.00mm +PinHeader_2x31_P2.00mm_Vertical_SMD +surface-mounted straight pin header, 2x31, 2.00mm pitch, double rows +Surface mounted pin header SMD 2x31 2.00mm double row +0 +62 +62 +Connector_PinHeader_2.00mm +PinHeader_2x32_P2.00mm_Horizontal +Through hole angled pin header, 2x32, 2.00mm pitch, 4.2mm pin length, double rows +Through hole angled pin header THT 2x32 2.00mm double row +0 +64 +64 +Connector_PinHeader_2.00mm +PinHeader_2x32_P2.00mm_Vertical +Through hole straight pin header, 2x32, 2.00mm pitch, double rows +Through hole pin header THT 2x32 2.00mm double row +0 +64 +64 +Connector_PinHeader_2.00mm +PinHeader_2x32_P2.00mm_Vertical_SMD +surface-mounted straight pin header, 2x32, 2.00mm pitch, double rows +Surface mounted pin header SMD 2x32 2.00mm double row +0 +64 +64 +Connector_PinHeader_2.00mm +PinHeader_2x33_P2.00mm_Horizontal +Through hole angled pin header, 2x33, 2.00mm pitch, 4.2mm pin length, double rows +Through hole angled pin header THT 2x33 2.00mm double row +0 +66 +66 +Connector_PinHeader_2.00mm +PinHeader_2x33_P2.00mm_Vertical +Through hole straight pin header, 2x33, 2.00mm pitch, double rows +Through hole pin header THT 2x33 2.00mm double row +0 +66 +66 +Connector_PinHeader_2.00mm +PinHeader_2x33_P2.00mm_Vertical_SMD +surface-mounted straight pin header, 2x33, 2.00mm pitch, double rows +Surface mounted pin header SMD 2x33 2.00mm double row +0 +66 +66 +Connector_PinHeader_2.00mm +PinHeader_2x34_P2.00mm_Horizontal +Through hole angled pin header, 2x34, 2.00mm pitch, 4.2mm pin length, double rows +Through hole angled pin header THT 2x34 2.00mm double row +0 +68 +68 +Connector_PinHeader_2.00mm +PinHeader_2x34_P2.00mm_Vertical +Through hole straight pin header, 2x34, 2.00mm pitch, double rows +Through hole pin header THT 2x34 2.00mm double row +0 +68 +68 +Connector_PinHeader_2.00mm +PinHeader_2x34_P2.00mm_Vertical_SMD +surface-mounted straight pin header, 2x34, 2.00mm pitch, double rows +Surface mounted pin header SMD 2x34 2.00mm double row +0 +68 +68 +Connector_PinHeader_2.00mm +PinHeader_2x35_P2.00mm_Horizontal +Through hole angled pin header, 2x35, 2.00mm pitch, 4.2mm pin length, double rows +Through hole angled pin header THT 2x35 2.00mm double row +0 +70 +70 +Connector_PinHeader_2.00mm +PinHeader_2x35_P2.00mm_Vertical +Through hole straight pin header, 2x35, 2.00mm pitch, double rows +Through hole pin header THT 2x35 2.00mm double row +0 +70 +70 +Connector_PinHeader_2.00mm +PinHeader_2x35_P2.00mm_Vertical_SMD +surface-mounted straight pin header, 2x35, 2.00mm pitch, double rows +Surface mounted pin header SMD 2x35 2.00mm double row +0 +70 +70 +Connector_PinHeader_2.00mm +PinHeader_2x36_P2.00mm_Horizontal +Through hole angled pin header, 2x36, 2.00mm pitch, 4.2mm pin length, double rows +Through hole angled pin header THT 2x36 2.00mm double row +0 +72 +72 +Connector_PinHeader_2.00mm +PinHeader_2x36_P2.00mm_Vertical +Through hole straight pin header, 2x36, 2.00mm pitch, double rows +Through hole pin header THT 2x36 2.00mm double row +0 +72 +72 +Connector_PinHeader_2.00mm +PinHeader_2x36_P2.00mm_Vertical_SMD +surface-mounted straight pin header, 2x36, 2.00mm pitch, double rows +Surface mounted pin header SMD 2x36 2.00mm double row +0 +72 +72 +Connector_PinHeader_2.00mm +PinHeader_2x37_P2.00mm_Horizontal +Through hole angled pin header, 2x37, 2.00mm pitch, 4.2mm pin length, double rows +Through hole angled pin header THT 2x37 2.00mm double row +0 +74 +74 +Connector_PinHeader_2.00mm +PinHeader_2x37_P2.00mm_Vertical +Through hole straight pin header, 2x37, 2.00mm pitch, double rows +Through hole pin header THT 2x37 2.00mm double row +0 +74 +74 +Connector_PinHeader_2.00mm +PinHeader_2x37_P2.00mm_Vertical_SMD +surface-mounted straight pin header, 2x37, 2.00mm pitch, double rows +Surface mounted pin header SMD 2x37 2.00mm double row +0 +74 +74 +Connector_PinHeader_2.00mm +PinHeader_2x38_P2.00mm_Horizontal +Through hole angled pin header, 2x38, 2.00mm pitch, 4.2mm pin length, double rows +Through hole angled pin header THT 2x38 2.00mm double row +0 +76 +76 +Connector_PinHeader_2.00mm +PinHeader_2x38_P2.00mm_Vertical +Through hole straight pin header, 2x38, 2.00mm pitch, double rows +Through hole pin header THT 2x38 2.00mm double row +0 +76 +76 +Connector_PinHeader_2.00mm +PinHeader_2x38_P2.00mm_Vertical_SMD +surface-mounted straight pin header, 2x38, 2.00mm pitch, double rows +Surface mounted pin header SMD 2x38 2.00mm double row +0 +76 +76 +Connector_PinHeader_2.00mm +PinHeader_2x39_P2.00mm_Horizontal +Through hole angled pin header, 2x39, 2.00mm pitch, 4.2mm pin length, double rows +Through hole angled pin header THT 2x39 2.00mm double row +0 +78 +78 +Connector_PinHeader_2.00mm +PinHeader_2x39_P2.00mm_Vertical +Through hole straight pin header, 2x39, 2.00mm pitch, double rows +Through hole pin header THT 2x39 2.00mm double row +0 +78 +78 +Connector_PinHeader_2.00mm +PinHeader_2x39_P2.00mm_Vertical_SMD +surface-mounted straight pin header, 2x39, 2.00mm pitch, double rows +Surface mounted pin header SMD 2x39 2.00mm double row +0 +78 +78 +Connector_PinHeader_2.00mm +PinHeader_2x40_P2.00mm_Horizontal +Through hole angled pin header, 2x40, 2.00mm pitch, 4.2mm pin length, double rows +Through hole angled pin header THT 2x40 2.00mm double row +0 +80 +80 +Connector_PinHeader_2.00mm +PinHeader_2x40_P2.00mm_Vertical +Through hole straight pin header, 2x40, 2.00mm pitch, double rows +Through hole pin header THT 2x40 2.00mm double row +0 +80 +80 +Connector_PinHeader_2.00mm +PinHeader_2x40_P2.00mm_Vertical_SMD +surface-mounted straight pin header, 2x40, 2.00mm pitch, double rows +Surface mounted pin header SMD 2x40 2.00mm double row +0 +80 +80 +Connector_PinHeader_2.54mm +PinHeader_1x01_P2.54mm_Horizontal +Through hole angled pin header, 1x01, 2.54mm pitch, 6mm pin length, single row +Through hole angled pin header THT 1x01 2.54mm single row +0 +1 +1 +Connector_PinHeader_2.54mm +PinHeader_1x01_P2.54mm_Vertical +Through hole straight pin header, 1x01, 2.54mm pitch, single row +Through hole pin header THT 1x01 2.54mm single row +0 +1 +1 +Connector_PinHeader_2.54mm +PinHeader_1x02_P2.54mm_Horizontal +Through hole angled pin header, 1x02, 2.54mm pitch, 6mm pin length, single row +Through hole angled pin header THT 1x02 2.54mm single row +0 +2 +2 +Connector_PinHeader_2.54mm +PinHeader_1x02_P2.54mm_Vertical +Through hole straight pin header, 1x02, 2.54mm pitch, single row +Through hole pin header THT 1x02 2.54mm single row +0 +2 +2 +Connector_PinHeader_2.54mm +PinHeader_1x02_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x02, 2.54mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x02 2.54mm single row style1 pin1 left +0 +2 +2 +Connector_PinHeader_2.54mm +PinHeader_1x02_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x02, 2.54mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x02 2.54mm single row style2 pin1 right +0 +2 +2 +Connector_PinHeader_2.54mm +PinHeader_1x03_P2.54mm_Horizontal +Through hole angled pin header, 1x03, 2.54mm pitch, 6mm pin length, single row +Through hole angled pin header THT 1x03 2.54mm single row +0 +3 +3 +Connector_PinHeader_2.54mm +PinHeader_1x03_P2.54mm_Vertical +Through hole straight pin header, 1x03, 2.54mm pitch, single row +Through hole pin header THT 1x03 2.54mm single row +0 +3 +3 +Connector_PinHeader_2.54mm +PinHeader_1x03_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x03, 2.54mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x03 2.54mm single row style1 pin1 left +0 +3 +3 +Connector_PinHeader_2.54mm +PinHeader_1x03_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x03, 2.54mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x03 2.54mm single row style2 pin1 right +0 +3 +3 +Connector_PinHeader_2.54mm +PinHeader_1x04_P2.54mm_Horizontal +Through hole angled pin header, 1x04, 2.54mm pitch, 6mm pin length, single row +Through hole angled pin header THT 1x04 2.54mm single row +0 +4 +4 +Connector_PinHeader_2.54mm +PinHeader_1x04_P2.54mm_Vertical +Through hole straight pin header, 1x04, 2.54mm pitch, single row +Through hole pin header THT 1x04 2.54mm single row +0 +4 +4 +Connector_PinHeader_2.54mm +PinHeader_1x04_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x04, 2.54mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x04 2.54mm single row style1 pin1 left +0 +4 +4 +Connector_PinHeader_2.54mm +PinHeader_1x04_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x04, 2.54mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x04 2.54mm single row style2 pin1 right +0 +4 +4 +Connector_PinHeader_2.54mm +PinHeader_1x05_P2.54mm_Horizontal +Through hole angled pin header, 1x05, 2.54mm pitch, 6mm pin length, single row +Through hole angled pin header THT 1x05 2.54mm single row +0 +5 +5 +Connector_PinHeader_2.54mm +PinHeader_1x05_P2.54mm_Vertical +Through hole straight pin header, 1x05, 2.54mm pitch, single row +Through hole pin header THT 1x05 2.54mm single row +0 +5 +5 +Connector_PinHeader_2.54mm +PinHeader_1x05_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x05, 2.54mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x05 2.54mm single row style1 pin1 left +0 +5 +5 +Connector_PinHeader_2.54mm +PinHeader_1x05_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x05, 2.54mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x05 2.54mm single row style2 pin1 right +0 +5 +5 +Connector_PinHeader_2.54mm +PinHeader_1x06_P2.54mm_Horizontal +Through hole angled pin header, 1x06, 2.54mm pitch, 6mm pin length, single row +Through hole angled pin header THT 1x06 2.54mm single row +0 +6 +6 +Connector_PinHeader_2.54mm +PinHeader_1x06_P2.54mm_Vertical +Through hole straight pin header, 1x06, 2.54mm pitch, single row +Through hole pin header THT 1x06 2.54mm single row +0 +6 +6 +Connector_PinHeader_2.54mm +PinHeader_1x06_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x06, 2.54mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x06 2.54mm single row style1 pin1 left +0 +6 +6 +Connector_PinHeader_2.54mm +PinHeader_1x06_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x06, 2.54mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x06 2.54mm single row style2 pin1 right +0 +6 +6 +Connector_PinHeader_2.54mm +PinHeader_1x07_P2.54mm_Horizontal +Through hole angled pin header, 1x07, 2.54mm pitch, 6mm pin length, single row +Through hole angled pin header THT 1x07 2.54mm single row +0 +7 +7 +Connector_PinHeader_2.54mm +PinHeader_1x07_P2.54mm_Vertical +Through hole straight pin header, 1x07, 2.54mm pitch, single row +Through hole pin header THT 1x07 2.54mm single row +0 +7 +7 +Connector_PinHeader_2.54mm +PinHeader_1x07_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x07, 2.54mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x07 2.54mm single row style1 pin1 left +0 +7 +7 +Connector_PinHeader_2.54mm +PinHeader_1x07_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x07, 2.54mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x07 2.54mm single row style2 pin1 right +0 +7 +7 +Connector_PinHeader_2.54mm +PinHeader_1x08_P2.54mm_Horizontal +Through hole angled pin header, 1x08, 2.54mm pitch, 6mm pin length, single row +Through hole angled pin header THT 1x08 2.54mm single row +0 +8 +8 +Connector_PinHeader_2.54mm +PinHeader_1x08_P2.54mm_Vertical +Through hole straight pin header, 1x08, 2.54mm pitch, single row +Through hole pin header THT 1x08 2.54mm single row +0 +8 +8 +Connector_PinHeader_2.54mm +PinHeader_1x08_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x08, 2.54mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x08 2.54mm single row style1 pin1 left +0 +8 +8 +Connector_PinHeader_2.54mm +PinHeader_1x08_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x08, 2.54mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x08 2.54mm single row style2 pin1 right +0 +8 +8 +Connector_PinHeader_2.54mm +PinHeader_1x09_P2.54mm_Horizontal +Through hole angled pin header, 1x09, 2.54mm pitch, 6mm pin length, single row +Through hole angled pin header THT 1x09 2.54mm single row +0 +9 +9 +Connector_PinHeader_2.54mm +PinHeader_1x09_P2.54mm_Vertical +Through hole straight pin header, 1x09, 2.54mm pitch, single row +Through hole pin header THT 1x09 2.54mm single row +0 +9 +9 +Connector_PinHeader_2.54mm +PinHeader_1x09_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x09, 2.54mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x09 2.54mm single row style1 pin1 left +0 +9 +9 +Connector_PinHeader_2.54mm +PinHeader_1x09_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x09, 2.54mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x09 2.54mm single row style2 pin1 right +0 +9 +9 +Connector_PinHeader_2.54mm +PinHeader_1x10_P2.54mm_Horizontal +Through hole angled pin header, 1x10, 2.54mm pitch, 6mm pin length, single row +Through hole angled pin header THT 1x10 2.54mm single row +0 +10 +10 +Connector_PinHeader_2.54mm +PinHeader_1x10_P2.54mm_Vertical +Through hole straight pin header, 1x10, 2.54mm pitch, single row +Through hole pin header THT 1x10 2.54mm single row +0 +10 +10 +Connector_PinHeader_2.54mm +PinHeader_1x10_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x10, 2.54mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x10 2.54mm single row style1 pin1 left +0 +10 +10 +Connector_PinHeader_2.54mm +PinHeader_1x10_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x10, 2.54mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x10 2.54mm single row style2 pin1 right +0 +10 +10 +Connector_PinHeader_2.54mm +PinHeader_1x11_P2.54mm_Horizontal +Through hole angled pin header, 1x11, 2.54mm pitch, 6mm pin length, single row +Through hole angled pin header THT 1x11 2.54mm single row +0 +11 +11 +Connector_PinHeader_2.54mm +PinHeader_1x11_P2.54mm_Vertical +Through hole straight pin header, 1x11, 2.54mm pitch, single row +Through hole pin header THT 1x11 2.54mm single row +0 +11 +11 +Connector_PinHeader_2.54mm +PinHeader_1x11_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x11, 2.54mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x11 2.54mm single row style1 pin1 left +0 +11 +11 +Connector_PinHeader_2.54mm +PinHeader_1x11_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x11, 2.54mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x11 2.54mm single row style2 pin1 right +0 +11 +11 +Connector_PinHeader_2.54mm +PinHeader_1x12_P2.54mm_Horizontal +Through hole angled pin header, 1x12, 2.54mm pitch, 6mm pin length, single row +Through hole angled pin header THT 1x12 2.54mm single row +0 +12 +12 +Connector_PinHeader_2.54mm +PinHeader_1x12_P2.54mm_Vertical +Through hole straight pin header, 1x12, 2.54mm pitch, single row +Through hole pin header THT 1x12 2.54mm single row +0 +12 +12 +Connector_PinHeader_2.54mm +PinHeader_1x12_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x12, 2.54mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x12 2.54mm single row style1 pin1 left +0 +12 +12 +Connector_PinHeader_2.54mm +PinHeader_1x12_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x12, 2.54mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x12 2.54mm single row style2 pin1 right +0 +12 +12 +Connector_PinHeader_2.54mm +PinHeader_1x13_P2.54mm_Horizontal +Through hole angled pin header, 1x13, 2.54mm pitch, 6mm pin length, single row +Through hole angled pin header THT 1x13 2.54mm single row +0 +13 +13 +Connector_PinHeader_2.54mm +PinHeader_1x13_P2.54mm_Vertical +Through hole straight pin header, 1x13, 2.54mm pitch, single row +Through hole pin header THT 1x13 2.54mm single row +0 +13 +13 +Connector_PinHeader_2.54mm +PinHeader_1x13_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x13, 2.54mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x13 2.54mm single row style1 pin1 left +0 +13 +13 +Connector_PinHeader_2.54mm +PinHeader_1x13_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x13, 2.54mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x13 2.54mm single row style2 pin1 right +0 +13 +13 +Connector_PinHeader_2.54mm +PinHeader_1x14_P2.54mm_Horizontal +Through hole angled pin header, 1x14, 2.54mm pitch, 6mm pin length, single row +Through hole angled pin header THT 1x14 2.54mm single row +0 +14 +14 +Connector_PinHeader_2.54mm +PinHeader_1x14_P2.54mm_Vertical +Through hole straight pin header, 1x14, 2.54mm pitch, single row +Through hole pin header THT 1x14 2.54mm single row +0 +14 +14 +Connector_PinHeader_2.54mm +PinHeader_1x14_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x14, 2.54mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x14 2.54mm single row style1 pin1 left +0 +14 +14 +Connector_PinHeader_2.54mm +PinHeader_1x14_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x14, 2.54mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x14 2.54mm single row style2 pin1 right +0 +14 +14 +Connector_PinHeader_2.54mm +PinHeader_1x15_P2.54mm_Horizontal +Through hole angled pin header, 1x15, 2.54mm pitch, 6mm pin length, single row +Through hole angled pin header THT 1x15 2.54mm single row +0 +15 +15 +Connector_PinHeader_2.54mm +PinHeader_1x15_P2.54mm_Vertical +Through hole straight pin header, 1x15, 2.54mm pitch, single row +Through hole pin header THT 1x15 2.54mm single row +0 +15 +15 +Connector_PinHeader_2.54mm +PinHeader_1x15_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x15, 2.54mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x15 2.54mm single row style1 pin1 left +0 +15 +15 +Connector_PinHeader_2.54mm +PinHeader_1x15_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x15, 2.54mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x15 2.54mm single row style2 pin1 right +0 +15 +15 +Connector_PinHeader_2.54mm +PinHeader_1x16_P2.54mm_Horizontal +Through hole angled pin header, 1x16, 2.54mm pitch, 6mm pin length, single row +Through hole angled pin header THT 1x16 2.54mm single row +0 +16 +16 +Connector_PinHeader_2.54mm +PinHeader_1x16_P2.54mm_Vertical +Through hole straight pin header, 1x16, 2.54mm pitch, single row +Through hole pin header THT 1x16 2.54mm single row +0 +16 +16 +Connector_PinHeader_2.54mm +PinHeader_1x16_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x16, 2.54mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x16 2.54mm single row style1 pin1 left +0 +16 +16 +Connector_PinHeader_2.54mm +PinHeader_1x16_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x16, 2.54mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x16 2.54mm single row style2 pin1 right +0 +16 +16 +Connector_PinHeader_2.54mm +PinHeader_1x17_P2.54mm_Horizontal +Through hole angled pin header, 1x17, 2.54mm pitch, 6mm pin length, single row +Through hole angled pin header THT 1x17 2.54mm single row +0 +17 +17 +Connector_PinHeader_2.54mm +PinHeader_1x17_P2.54mm_Vertical +Through hole straight pin header, 1x17, 2.54mm pitch, single row +Through hole pin header THT 1x17 2.54mm single row +0 +17 +17 +Connector_PinHeader_2.54mm +PinHeader_1x17_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x17, 2.54mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x17 2.54mm single row style1 pin1 left +0 +17 +17 +Connector_PinHeader_2.54mm +PinHeader_1x17_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x17, 2.54mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x17 2.54mm single row style2 pin1 right +0 +17 +17 +Connector_PinHeader_2.54mm +PinHeader_1x18_P2.54mm_Horizontal +Through hole angled pin header, 1x18, 2.54mm pitch, 6mm pin length, single row +Through hole angled pin header THT 1x18 2.54mm single row +0 +18 +18 +Connector_PinHeader_2.54mm +PinHeader_1x18_P2.54mm_Vertical +Through hole straight pin header, 1x18, 2.54mm pitch, single row +Through hole pin header THT 1x18 2.54mm single row +0 +18 +18 +Connector_PinHeader_2.54mm +PinHeader_1x18_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x18, 2.54mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x18 2.54mm single row style1 pin1 left +0 +18 +18 +Connector_PinHeader_2.54mm +PinHeader_1x18_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x18, 2.54mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x18 2.54mm single row style2 pin1 right +0 +18 +18 +Connector_PinHeader_2.54mm +PinHeader_1x19_P2.54mm_Horizontal +Through hole angled pin header, 1x19, 2.54mm pitch, 6mm pin length, single row +Through hole angled pin header THT 1x19 2.54mm single row +0 +19 +19 +Connector_PinHeader_2.54mm +PinHeader_1x19_P2.54mm_Vertical +Through hole straight pin header, 1x19, 2.54mm pitch, single row +Through hole pin header THT 1x19 2.54mm single row +0 +19 +19 +Connector_PinHeader_2.54mm +PinHeader_1x19_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x19, 2.54mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x19 2.54mm single row style1 pin1 left +0 +19 +19 +Connector_PinHeader_2.54mm +PinHeader_1x19_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x19, 2.54mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x19 2.54mm single row style2 pin1 right +0 +19 +19 +Connector_PinHeader_2.54mm +PinHeader_1x20_P2.54mm_Horizontal +Through hole angled pin header, 1x20, 2.54mm pitch, 6mm pin length, single row +Through hole angled pin header THT 1x20 2.54mm single row +0 +20 +20 +Connector_PinHeader_2.54mm +PinHeader_1x20_P2.54mm_Vertical +Through hole straight pin header, 1x20, 2.54mm pitch, single row +Through hole pin header THT 1x20 2.54mm single row +0 +20 +20 +Connector_PinHeader_2.54mm +PinHeader_1x20_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x20, 2.54mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x20 2.54mm single row style1 pin1 left +0 +20 +20 +Connector_PinHeader_2.54mm +PinHeader_1x20_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x20, 2.54mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x20 2.54mm single row style2 pin1 right +0 +20 +20 +Connector_PinHeader_2.54mm +PinHeader_1x21_P2.54mm_Horizontal +Through hole angled pin header, 1x21, 2.54mm pitch, 6mm pin length, single row +Through hole angled pin header THT 1x21 2.54mm single row +0 +21 +21 +Connector_PinHeader_2.54mm +PinHeader_1x21_P2.54mm_Vertical +Through hole straight pin header, 1x21, 2.54mm pitch, single row +Through hole pin header THT 1x21 2.54mm single row +0 +21 +21 +Connector_PinHeader_2.54mm +PinHeader_1x21_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x21, 2.54mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x21 2.54mm single row style1 pin1 left +0 +21 +21 +Connector_PinHeader_2.54mm +PinHeader_1x21_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x21, 2.54mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x21 2.54mm single row style2 pin1 right +0 +21 +21 +Connector_PinHeader_2.54mm +PinHeader_1x22_P2.54mm_Horizontal +Through hole angled pin header, 1x22, 2.54mm pitch, 6mm pin length, single row +Through hole angled pin header THT 1x22 2.54mm single row +0 +22 +22 +Connector_PinHeader_2.54mm +PinHeader_1x22_P2.54mm_Vertical +Through hole straight pin header, 1x22, 2.54mm pitch, single row +Through hole pin header THT 1x22 2.54mm single row +0 +22 +22 +Connector_PinHeader_2.54mm +PinHeader_1x22_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x22, 2.54mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x22 2.54mm single row style1 pin1 left +0 +22 +22 +Connector_PinHeader_2.54mm +PinHeader_1x22_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x22, 2.54mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x22 2.54mm single row style2 pin1 right +0 +22 +22 +Connector_PinHeader_2.54mm +PinHeader_1x23_P2.54mm_Horizontal +Through hole angled pin header, 1x23, 2.54mm pitch, 6mm pin length, single row +Through hole angled pin header THT 1x23 2.54mm single row +0 +23 +23 +Connector_PinHeader_2.54mm +PinHeader_1x23_P2.54mm_Vertical +Through hole straight pin header, 1x23, 2.54mm pitch, single row +Through hole pin header THT 1x23 2.54mm single row +0 +23 +23 +Connector_PinHeader_2.54mm +PinHeader_1x23_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x23, 2.54mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x23 2.54mm single row style1 pin1 left +0 +23 +23 +Connector_PinHeader_2.54mm +PinHeader_1x23_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x23, 2.54mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x23 2.54mm single row style2 pin1 right +0 +23 +23 +Connector_PinHeader_2.54mm +PinHeader_1x24_P2.54mm_Horizontal +Through hole angled pin header, 1x24, 2.54mm pitch, 6mm pin length, single row +Through hole angled pin header THT 1x24 2.54mm single row +0 +24 +24 +Connector_PinHeader_2.54mm +PinHeader_1x24_P2.54mm_Vertical +Through hole straight pin header, 1x24, 2.54mm pitch, single row +Through hole pin header THT 1x24 2.54mm single row +0 +24 +24 +Connector_PinHeader_2.54mm +PinHeader_1x24_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x24, 2.54mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x24 2.54mm single row style1 pin1 left +0 +24 +24 +Connector_PinHeader_2.54mm +PinHeader_1x24_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x24, 2.54mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x24 2.54mm single row style2 pin1 right +0 +24 +24 +Connector_PinHeader_2.54mm +PinHeader_1x25_P2.54mm_Horizontal +Through hole angled pin header, 1x25, 2.54mm pitch, 6mm pin length, single row +Through hole angled pin header THT 1x25 2.54mm single row +0 +25 +25 +Connector_PinHeader_2.54mm +PinHeader_1x25_P2.54mm_Vertical +Through hole straight pin header, 1x25, 2.54mm pitch, single row +Through hole pin header THT 1x25 2.54mm single row +0 +25 +25 +Connector_PinHeader_2.54mm +PinHeader_1x25_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x25, 2.54mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x25 2.54mm single row style1 pin1 left +0 +25 +25 +Connector_PinHeader_2.54mm +PinHeader_1x25_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x25, 2.54mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x25 2.54mm single row style2 pin1 right +0 +25 +25 +Connector_PinHeader_2.54mm +PinHeader_1x26_P2.54mm_Horizontal +Through hole angled pin header, 1x26, 2.54mm pitch, 6mm pin length, single row +Through hole angled pin header THT 1x26 2.54mm single row +0 +26 +26 +Connector_PinHeader_2.54mm +PinHeader_1x26_P2.54mm_Vertical +Through hole straight pin header, 1x26, 2.54mm pitch, single row +Through hole pin header THT 1x26 2.54mm single row +0 +26 +26 +Connector_PinHeader_2.54mm +PinHeader_1x26_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x26, 2.54mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x26 2.54mm single row style1 pin1 left +0 +26 +26 +Connector_PinHeader_2.54mm +PinHeader_1x26_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x26, 2.54mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x26 2.54mm single row style2 pin1 right +0 +26 +26 +Connector_PinHeader_2.54mm +PinHeader_1x27_P2.54mm_Horizontal +Through hole angled pin header, 1x27, 2.54mm pitch, 6mm pin length, single row +Through hole angled pin header THT 1x27 2.54mm single row +0 +27 +27 +Connector_PinHeader_2.54mm +PinHeader_1x27_P2.54mm_Vertical +Through hole straight pin header, 1x27, 2.54mm pitch, single row +Through hole pin header THT 1x27 2.54mm single row +0 +27 +27 +Connector_PinHeader_2.54mm +PinHeader_1x27_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x27, 2.54mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x27 2.54mm single row style1 pin1 left +0 +27 +27 +Connector_PinHeader_2.54mm +PinHeader_1x27_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x27, 2.54mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x27 2.54mm single row style2 pin1 right +0 +27 +27 +Connector_PinHeader_2.54mm +PinHeader_1x28_P2.54mm_Horizontal +Through hole angled pin header, 1x28, 2.54mm pitch, 6mm pin length, single row +Through hole angled pin header THT 1x28 2.54mm single row +0 +28 +28 +Connector_PinHeader_2.54mm +PinHeader_1x28_P2.54mm_Vertical +Through hole straight pin header, 1x28, 2.54mm pitch, single row +Through hole pin header THT 1x28 2.54mm single row +0 +28 +28 +Connector_PinHeader_2.54mm +PinHeader_1x28_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x28, 2.54mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x28 2.54mm single row style1 pin1 left +0 +28 +28 +Connector_PinHeader_2.54mm +PinHeader_1x28_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x28, 2.54mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x28 2.54mm single row style2 pin1 right +0 +28 +28 +Connector_PinHeader_2.54mm +PinHeader_1x29_P2.54mm_Horizontal +Through hole angled pin header, 1x29, 2.54mm pitch, 6mm pin length, single row +Through hole angled pin header THT 1x29 2.54mm single row +0 +29 +29 +Connector_PinHeader_2.54mm +PinHeader_1x29_P2.54mm_Vertical +Through hole straight pin header, 1x29, 2.54mm pitch, single row +Through hole pin header THT 1x29 2.54mm single row +0 +29 +29 +Connector_PinHeader_2.54mm +PinHeader_1x29_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x29, 2.54mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x29 2.54mm single row style1 pin1 left +0 +29 +29 +Connector_PinHeader_2.54mm +PinHeader_1x29_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x29, 2.54mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x29 2.54mm single row style2 pin1 right +0 +29 +29 +Connector_PinHeader_2.54mm +PinHeader_1x30_P2.54mm_Horizontal +Through hole angled pin header, 1x30, 2.54mm pitch, 6mm pin length, single row +Through hole angled pin header THT 1x30 2.54mm single row +0 +30 +30 +Connector_PinHeader_2.54mm +PinHeader_1x30_P2.54mm_Vertical +Through hole straight pin header, 1x30, 2.54mm pitch, single row +Through hole pin header THT 1x30 2.54mm single row +0 +30 +30 +Connector_PinHeader_2.54mm +PinHeader_1x30_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x30, 2.54mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x30 2.54mm single row style1 pin1 left +0 +30 +30 +Connector_PinHeader_2.54mm +PinHeader_1x30_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x30, 2.54mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x30 2.54mm single row style2 pin1 right +0 +30 +30 +Connector_PinHeader_2.54mm +PinHeader_1x31_P2.54mm_Horizontal +Through hole angled pin header, 1x31, 2.54mm pitch, 6mm pin length, single row +Through hole angled pin header THT 1x31 2.54mm single row +0 +31 +31 +Connector_PinHeader_2.54mm +PinHeader_1x31_P2.54mm_Vertical +Through hole straight pin header, 1x31, 2.54mm pitch, single row +Through hole pin header THT 1x31 2.54mm single row +0 +31 +31 +Connector_PinHeader_2.54mm +PinHeader_1x31_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x31, 2.54mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x31 2.54mm single row style1 pin1 left +0 +31 +31 +Connector_PinHeader_2.54mm +PinHeader_1x31_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x31, 2.54mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x31 2.54mm single row style2 pin1 right +0 +31 +31 +Connector_PinHeader_2.54mm +PinHeader_1x32_P2.54mm_Horizontal +Through hole angled pin header, 1x32, 2.54mm pitch, 6mm pin length, single row +Through hole angled pin header THT 1x32 2.54mm single row +0 +32 +32 +Connector_PinHeader_2.54mm +PinHeader_1x32_P2.54mm_Vertical +Through hole straight pin header, 1x32, 2.54mm pitch, single row +Through hole pin header THT 1x32 2.54mm single row +0 +32 +32 +Connector_PinHeader_2.54mm +PinHeader_1x32_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x32, 2.54mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x32 2.54mm single row style1 pin1 left +0 +32 +32 +Connector_PinHeader_2.54mm +PinHeader_1x32_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x32, 2.54mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x32 2.54mm single row style2 pin1 right +0 +32 +32 +Connector_PinHeader_2.54mm +PinHeader_1x33_P2.54mm_Horizontal +Through hole angled pin header, 1x33, 2.54mm pitch, 6mm pin length, single row +Through hole angled pin header THT 1x33 2.54mm single row +0 +33 +33 +Connector_PinHeader_2.54mm +PinHeader_1x33_P2.54mm_Vertical +Through hole straight pin header, 1x33, 2.54mm pitch, single row +Through hole pin header THT 1x33 2.54mm single row +0 +33 +33 +Connector_PinHeader_2.54mm +PinHeader_1x33_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x33, 2.54mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x33 2.54mm single row style1 pin1 left +0 +33 +33 +Connector_PinHeader_2.54mm +PinHeader_1x33_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x33, 2.54mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x33 2.54mm single row style2 pin1 right +0 +33 +33 +Connector_PinHeader_2.54mm +PinHeader_1x34_P2.54mm_Horizontal +Through hole angled pin header, 1x34, 2.54mm pitch, 6mm pin length, single row +Through hole angled pin header THT 1x34 2.54mm single row +0 +34 +34 +Connector_PinHeader_2.54mm +PinHeader_1x34_P2.54mm_Vertical +Through hole straight pin header, 1x34, 2.54mm pitch, single row +Through hole pin header THT 1x34 2.54mm single row +0 +34 +34 +Connector_PinHeader_2.54mm +PinHeader_1x34_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x34, 2.54mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x34 2.54mm single row style1 pin1 left +0 +34 +34 +Connector_PinHeader_2.54mm +PinHeader_1x34_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x34, 2.54mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x34 2.54mm single row style2 pin1 right +0 +34 +34 +Connector_PinHeader_2.54mm +PinHeader_1x35_P2.54mm_Horizontal +Through hole angled pin header, 1x35, 2.54mm pitch, 6mm pin length, single row +Through hole angled pin header THT 1x35 2.54mm single row +0 +35 +35 +Connector_PinHeader_2.54mm +PinHeader_1x35_P2.54mm_Vertical +Through hole straight pin header, 1x35, 2.54mm pitch, single row +Through hole pin header THT 1x35 2.54mm single row +0 +35 +35 +Connector_PinHeader_2.54mm +PinHeader_1x35_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x35, 2.54mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x35 2.54mm single row style1 pin1 left +0 +35 +35 +Connector_PinHeader_2.54mm +PinHeader_1x35_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x35, 2.54mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x35 2.54mm single row style2 pin1 right +0 +35 +35 +Connector_PinHeader_2.54mm +PinHeader_1x36_P2.54mm_Horizontal +Through hole angled pin header, 1x36, 2.54mm pitch, 6mm pin length, single row +Through hole angled pin header THT 1x36 2.54mm single row +0 +36 +36 +Connector_PinHeader_2.54mm +PinHeader_1x36_P2.54mm_Vertical +Through hole straight pin header, 1x36, 2.54mm pitch, single row +Through hole pin header THT 1x36 2.54mm single row +0 +36 +36 +Connector_PinHeader_2.54mm +PinHeader_1x36_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x36, 2.54mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x36 2.54mm single row style1 pin1 left +0 +36 +36 +Connector_PinHeader_2.54mm +PinHeader_1x36_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x36, 2.54mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x36 2.54mm single row style2 pin1 right +0 +36 +36 +Connector_PinHeader_2.54mm +PinHeader_1x37_P2.54mm_Horizontal +Through hole angled pin header, 1x37, 2.54mm pitch, 6mm pin length, single row +Through hole angled pin header THT 1x37 2.54mm single row +0 +37 +37 +Connector_PinHeader_2.54mm +PinHeader_1x37_P2.54mm_Vertical +Through hole straight pin header, 1x37, 2.54mm pitch, single row +Through hole pin header THT 1x37 2.54mm single row +0 +37 +37 +Connector_PinHeader_2.54mm +PinHeader_1x37_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x37, 2.54mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x37 2.54mm single row style1 pin1 left +0 +37 +37 +Connector_PinHeader_2.54mm +PinHeader_1x37_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x37, 2.54mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x37 2.54mm single row style2 pin1 right +0 +37 +37 +Connector_PinHeader_2.54mm +PinHeader_1x38_P2.54mm_Horizontal +Through hole angled pin header, 1x38, 2.54mm pitch, 6mm pin length, single row +Through hole angled pin header THT 1x38 2.54mm single row +0 +38 +38 +Connector_PinHeader_2.54mm +PinHeader_1x38_P2.54mm_Vertical +Through hole straight pin header, 1x38, 2.54mm pitch, single row +Through hole pin header THT 1x38 2.54mm single row +0 +38 +38 +Connector_PinHeader_2.54mm +PinHeader_1x38_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x38, 2.54mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x38 2.54mm single row style1 pin1 left +0 +38 +38 +Connector_PinHeader_2.54mm +PinHeader_1x38_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x38, 2.54mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x38 2.54mm single row style2 pin1 right +0 +38 +38 +Connector_PinHeader_2.54mm +PinHeader_1x39_P2.54mm_Horizontal +Through hole angled pin header, 1x39, 2.54mm pitch, 6mm pin length, single row +Through hole angled pin header THT 1x39 2.54mm single row +0 +39 +39 +Connector_PinHeader_2.54mm +PinHeader_1x39_P2.54mm_Vertical +Through hole straight pin header, 1x39, 2.54mm pitch, single row +Through hole pin header THT 1x39 2.54mm single row +0 +39 +39 +Connector_PinHeader_2.54mm +PinHeader_1x39_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x39, 2.54mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x39 2.54mm single row style1 pin1 left +0 +39 +39 +Connector_PinHeader_2.54mm +PinHeader_1x39_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x39, 2.54mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x39 2.54mm single row style2 pin1 right +0 +39 +39 +Connector_PinHeader_2.54mm +PinHeader_1x40_P2.54mm_Horizontal +Through hole angled pin header, 1x40, 2.54mm pitch, 6mm pin length, single row +Through hole angled pin header THT 1x40 2.54mm single row +0 +40 +40 +Connector_PinHeader_2.54mm +PinHeader_1x40_P2.54mm_Vertical +Through hole straight pin header, 1x40, 2.54mm pitch, single row +Through hole pin header THT 1x40 2.54mm single row +0 +40 +40 +Connector_PinHeader_2.54mm +PinHeader_1x40_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight pin header, 1x40, 2.54mm pitch, single row, style 1 (pin 1 left) +Surface mounted pin header SMD 1x40 2.54mm single row style1 pin1 left +0 +40 +40 +Connector_PinHeader_2.54mm +PinHeader_1x40_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight pin header, 1x40, 2.54mm pitch, single row, style 2 (pin 1 right) +Surface mounted pin header SMD 1x40 2.54mm single row style2 pin1 right +0 +40 +40 +Connector_PinHeader_2.54mm +PinHeader_2x01_P2.54mm_Horizontal +Through hole angled pin header, 2x01, 2.54mm pitch, 6mm pin length, double rows +Through hole angled pin header THT 2x01 2.54mm double row +0 +2 +2 +Connector_PinHeader_2.54mm +PinHeader_2x01_P2.54mm_Vertical +Through hole straight pin header, 2x01, 2.54mm pitch, double rows +Through hole pin header THT 2x01 2.54mm double row +0 +2 +2 +Connector_PinHeader_2.54mm +PinHeader_2x01_P2.54mm_Vertical_SMD +surface-mounted straight pin header, 2x01, 2.54mm pitch, double rows +Surface mounted pin header SMD 2x01 2.54mm double row +0 +2 +2 +Connector_PinHeader_2.54mm +PinHeader_2x02_P2.54mm_Horizontal +Through hole angled pin header, 2x02, 2.54mm pitch, 6mm pin length, double rows +Through hole angled pin header THT 2x02 2.54mm double row +0 +4 +4 +Connector_PinHeader_2.54mm +PinHeader_2x02_P2.54mm_Vertical +Through hole straight pin header, 2x02, 2.54mm pitch, double rows +Through hole pin header THT 2x02 2.54mm double row +0 +4 +4 +Connector_PinHeader_2.54mm +PinHeader_2x02_P2.54mm_Vertical_SMD +surface-mounted straight pin header, 2x02, 2.54mm pitch, double rows +Surface mounted pin header SMD 2x02 2.54mm double row +0 +4 +4 +Connector_PinHeader_2.54mm +PinHeader_2x03_P2.54mm_Horizontal +Through hole angled pin header, 2x03, 2.54mm pitch, 6mm pin length, double rows +Through hole angled pin header THT 2x03 2.54mm double row +0 +6 +6 +Connector_PinHeader_2.54mm +PinHeader_2x03_P2.54mm_Vertical +Through hole straight pin header, 2x03, 2.54mm pitch, double rows +Through hole pin header THT 2x03 2.54mm double row +0 +6 +6 +Connector_PinHeader_2.54mm +PinHeader_2x03_P2.54mm_Vertical_SMD +surface-mounted straight pin header, 2x03, 2.54mm pitch, double rows +Surface mounted pin header SMD 2x03 2.54mm double row +0 +6 +6 +Connector_PinHeader_2.54mm +PinHeader_2x04_P2.54mm_Horizontal +Through hole angled pin header, 2x04, 2.54mm pitch, 6mm pin length, double rows +Through hole angled pin header THT 2x04 2.54mm double row +0 +8 +8 +Connector_PinHeader_2.54mm +PinHeader_2x04_P2.54mm_Vertical +Through hole straight pin header, 2x04, 2.54mm pitch, double rows +Through hole pin header THT 2x04 2.54mm double row +0 +8 +8 +Connector_PinHeader_2.54mm +PinHeader_2x04_P2.54mm_Vertical_SMD +surface-mounted straight pin header, 2x04, 2.54mm pitch, double rows +Surface mounted pin header SMD 2x04 2.54mm double row +0 +8 +8 +Connector_PinHeader_2.54mm +PinHeader_2x05_P2.54mm_Horizontal +Through hole angled pin header, 2x05, 2.54mm pitch, 6mm pin length, double rows +Through hole angled pin header THT 2x05 2.54mm double row +0 +10 +10 +Connector_PinHeader_2.54mm +PinHeader_2x05_P2.54mm_Vertical +Through hole straight pin header, 2x05, 2.54mm pitch, double rows +Through hole pin header THT 2x05 2.54mm double row +0 +10 +10 +Connector_PinHeader_2.54mm +PinHeader_2x05_P2.54mm_Vertical_SMD +surface-mounted straight pin header, 2x05, 2.54mm pitch, double rows +Surface mounted pin header SMD 2x05 2.54mm double row +0 +10 +10 +Connector_PinHeader_2.54mm +PinHeader_2x06_P2.54mm_Horizontal +Through hole angled pin header, 2x06, 2.54mm pitch, 6mm pin length, double rows +Through hole angled pin header THT 2x06 2.54mm double row +0 +12 +12 +Connector_PinHeader_2.54mm +PinHeader_2x06_P2.54mm_Vertical +Through hole straight pin header, 2x06, 2.54mm pitch, double rows +Through hole pin header THT 2x06 2.54mm double row +0 +12 +12 +Connector_PinHeader_2.54mm +PinHeader_2x06_P2.54mm_Vertical_SMD +surface-mounted straight pin header, 2x06, 2.54mm pitch, double rows +Surface mounted pin header SMD 2x06 2.54mm double row +0 +12 +12 +Connector_PinHeader_2.54mm +PinHeader_2x07_P2.54mm_Horizontal +Through hole angled pin header, 2x07, 2.54mm pitch, 6mm pin length, double rows +Through hole angled pin header THT 2x07 2.54mm double row +0 +14 +14 +Connector_PinHeader_2.54mm +PinHeader_2x07_P2.54mm_Vertical +Through hole straight pin header, 2x07, 2.54mm pitch, double rows +Through hole pin header THT 2x07 2.54mm double row +0 +14 +14 +Connector_PinHeader_2.54mm +PinHeader_2x07_P2.54mm_Vertical_SMD +surface-mounted straight pin header, 2x07, 2.54mm pitch, double rows +Surface mounted pin header SMD 2x07 2.54mm double row +0 +14 +14 +Connector_PinHeader_2.54mm +PinHeader_2x08_P2.54mm_Horizontal +Through hole angled pin header, 2x08, 2.54mm pitch, 6mm pin length, double rows +Through hole angled pin header THT 2x08 2.54mm double row +0 +16 +16 +Connector_PinHeader_2.54mm +PinHeader_2x08_P2.54mm_Vertical +Through hole straight pin header, 2x08, 2.54mm pitch, double rows +Through hole pin header THT 2x08 2.54mm double row +0 +16 +16 +Connector_PinHeader_2.54mm +PinHeader_2x08_P2.54mm_Vertical_SMD +surface-mounted straight pin header, 2x08, 2.54mm pitch, double rows +Surface mounted pin header SMD 2x08 2.54mm double row +0 +16 +16 +Connector_PinHeader_2.54mm +PinHeader_2x09_P2.54mm_Horizontal +Through hole angled pin header, 2x09, 2.54mm pitch, 6mm pin length, double rows +Through hole angled pin header THT 2x09 2.54mm double row +0 +18 +18 +Connector_PinHeader_2.54mm +PinHeader_2x09_P2.54mm_Vertical +Through hole straight pin header, 2x09, 2.54mm pitch, double rows +Through hole pin header THT 2x09 2.54mm double row +0 +18 +18 +Connector_PinHeader_2.54mm +PinHeader_2x09_P2.54mm_Vertical_SMD +surface-mounted straight pin header, 2x09, 2.54mm pitch, double rows +Surface mounted pin header SMD 2x09 2.54mm double row +0 +18 +18 +Connector_PinHeader_2.54mm +PinHeader_2x10_P2.54mm_Horizontal +Through hole angled pin header, 2x10, 2.54mm pitch, 6mm pin length, double rows +Through hole angled pin header THT 2x10 2.54mm double row +0 +20 +20 +Connector_PinHeader_2.54mm +PinHeader_2x10_P2.54mm_Vertical +Through hole straight pin header, 2x10, 2.54mm pitch, double rows +Through hole pin header THT 2x10 2.54mm double row +0 +20 +20 +Connector_PinHeader_2.54mm +PinHeader_2x10_P2.54mm_Vertical_SMD +surface-mounted straight pin header, 2x10, 2.54mm pitch, double rows +Surface mounted pin header SMD 2x10 2.54mm double row +0 +20 +20 +Connector_PinHeader_2.54mm +PinHeader_2x11_P2.54mm_Horizontal +Through hole angled pin header, 2x11, 2.54mm pitch, 6mm pin length, double rows +Through hole angled pin header THT 2x11 2.54mm double row +0 +22 +22 +Connector_PinHeader_2.54mm +PinHeader_2x11_P2.54mm_Vertical +Through hole straight pin header, 2x11, 2.54mm pitch, double rows +Through hole pin header THT 2x11 2.54mm double row +0 +22 +22 +Connector_PinHeader_2.54mm +PinHeader_2x11_P2.54mm_Vertical_SMD +surface-mounted straight pin header, 2x11, 2.54mm pitch, double rows +Surface mounted pin header SMD 2x11 2.54mm double row +0 +22 +22 +Connector_PinHeader_2.54mm +PinHeader_2x12_P2.54mm_Horizontal +Through hole angled pin header, 2x12, 2.54mm pitch, 6mm pin length, double rows +Through hole angled pin header THT 2x12 2.54mm double row +0 +24 +24 +Connector_PinHeader_2.54mm +PinHeader_2x12_P2.54mm_Vertical +Through hole straight pin header, 2x12, 2.54mm pitch, double rows +Through hole pin header THT 2x12 2.54mm double row +0 +24 +24 +Connector_PinHeader_2.54mm +PinHeader_2x12_P2.54mm_Vertical_SMD +surface-mounted straight pin header, 2x12, 2.54mm pitch, double rows +Surface mounted pin header SMD 2x12 2.54mm double row +0 +24 +24 +Connector_PinHeader_2.54mm +PinHeader_2x13_P2.54mm_Horizontal +Through hole angled pin header, 2x13, 2.54mm pitch, 6mm pin length, double rows +Through hole angled pin header THT 2x13 2.54mm double row +0 +26 +26 +Connector_PinHeader_2.54mm +PinHeader_2x13_P2.54mm_Vertical +Through hole straight pin header, 2x13, 2.54mm pitch, double rows +Through hole pin header THT 2x13 2.54mm double row +0 +26 +26 +Connector_PinHeader_2.54mm +PinHeader_2x13_P2.54mm_Vertical_SMD +surface-mounted straight pin header, 2x13, 2.54mm pitch, double rows +Surface mounted pin header SMD 2x13 2.54mm double row +0 +26 +26 +Connector_PinHeader_2.54mm +PinHeader_2x14_P2.54mm_Horizontal +Through hole angled pin header, 2x14, 2.54mm pitch, 6mm pin length, double rows +Through hole angled pin header THT 2x14 2.54mm double row +0 +28 +28 +Connector_PinHeader_2.54mm +PinHeader_2x14_P2.54mm_Vertical +Through hole straight pin header, 2x14, 2.54mm pitch, double rows +Through hole pin header THT 2x14 2.54mm double row +0 +28 +28 +Connector_PinHeader_2.54mm +PinHeader_2x14_P2.54mm_Vertical_SMD +surface-mounted straight pin header, 2x14, 2.54mm pitch, double rows +Surface mounted pin header SMD 2x14 2.54mm double row +0 +28 +28 +Connector_PinHeader_2.54mm +PinHeader_2x15_P2.54mm_Horizontal +Through hole angled pin header, 2x15, 2.54mm pitch, 6mm pin length, double rows +Through hole angled pin header THT 2x15 2.54mm double row +0 +30 +30 +Connector_PinHeader_2.54mm +PinHeader_2x15_P2.54mm_Vertical +Through hole straight pin header, 2x15, 2.54mm pitch, double rows +Through hole pin header THT 2x15 2.54mm double row +0 +30 +30 +Connector_PinHeader_2.54mm +PinHeader_2x15_P2.54mm_Vertical_SMD +surface-mounted straight pin header, 2x15, 2.54mm pitch, double rows +Surface mounted pin header SMD 2x15 2.54mm double row +0 +30 +30 +Connector_PinHeader_2.54mm +PinHeader_2x16_P2.54mm_Horizontal +Through hole angled pin header, 2x16, 2.54mm pitch, 6mm pin length, double rows +Through hole angled pin header THT 2x16 2.54mm double row +0 +32 +32 +Connector_PinHeader_2.54mm +PinHeader_2x16_P2.54mm_Vertical +Through hole straight pin header, 2x16, 2.54mm pitch, double rows +Through hole pin header THT 2x16 2.54mm double row +0 +32 +32 +Connector_PinHeader_2.54mm +PinHeader_2x16_P2.54mm_Vertical_SMD +surface-mounted straight pin header, 2x16, 2.54mm pitch, double rows +Surface mounted pin header SMD 2x16 2.54mm double row +0 +32 +32 +Connector_PinHeader_2.54mm +PinHeader_2x17_P2.54mm_Horizontal +Through hole angled pin header, 2x17, 2.54mm pitch, 6mm pin length, double rows +Through hole angled pin header THT 2x17 2.54mm double row +0 +34 +34 +Connector_PinHeader_2.54mm +PinHeader_2x17_P2.54mm_Vertical +Through hole straight pin header, 2x17, 2.54mm pitch, double rows +Through hole pin header THT 2x17 2.54mm double row +0 +34 +34 +Connector_PinHeader_2.54mm +PinHeader_2x17_P2.54mm_Vertical_SMD +surface-mounted straight pin header, 2x17, 2.54mm pitch, double rows +Surface mounted pin header SMD 2x17 2.54mm double row +0 +34 +34 +Connector_PinHeader_2.54mm +PinHeader_2x18_P2.54mm_Horizontal +Through hole angled pin header, 2x18, 2.54mm pitch, 6mm pin length, double rows +Through hole angled pin header THT 2x18 2.54mm double row +0 +36 +36 +Connector_PinHeader_2.54mm +PinHeader_2x18_P2.54mm_Vertical +Through hole straight pin header, 2x18, 2.54mm pitch, double rows +Through hole pin header THT 2x18 2.54mm double row +0 +36 +36 +Connector_PinHeader_2.54mm +PinHeader_2x18_P2.54mm_Vertical_SMD +surface-mounted straight pin header, 2x18, 2.54mm pitch, double rows +Surface mounted pin header SMD 2x18 2.54mm double row +0 +36 +36 +Connector_PinHeader_2.54mm +PinHeader_2x19_P2.54mm_Horizontal +Through hole angled pin header, 2x19, 2.54mm pitch, 6mm pin length, double rows +Through hole angled pin header THT 2x19 2.54mm double row +0 +38 +38 +Connector_PinHeader_2.54mm +PinHeader_2x19_P2.54mm_Vertical +Through hole straight pin header, 2x19, 2.54mm pitch, double rows +Through hole pin header THT 2x19 2.54mm double row +0 +38 +38 +Connector_PinHeader_2.54mm +PinHeader_2x19_P2.54mm_Vertical_SMD +surface-mounted straight pin header, 2x19, 2.54mm pitch, double rows +Surface mounted pin header SMD 2x19 2.54mm double row +0 +38 +38 +Connector_PinHeader_2.54mm +PinHeader_2x20_P2.54mm_Horizontal +Through hole angled pin header, 2x20, 2.54mm pitch, 6mm pin length, double rows +Through hole angled pin header THT 2x20 2.54mm double row +0 +40 +40 +Connector_PinHeader_2.54mm +PinHeader_2x20_P2.54mm_Vertical +Through hole straight pin header, 2x20, 2.54mm pitch, double rows +Through hole pin header THT 2x20 2.54mm double row +0 +40 +40 +Connector_PinHeader_2.54mm +PinHeader_2x20_P2.54mm_Vertical_SMD +surface-mounted straight pin header, 2x20, 2.54mm pitch, double rows +Surface mounted pin header SMD 2x20 2.54mm double row +0 +40 +40 +Connector_PinHeader_2.54mm +PinHeader_2x21_P2.54mm_Horizontal +Through hole angled pin header, 2x21, 2.54mm pitch, 6mm pin length, double rows +Through hole angled pin header THT 2x21 2.54mm double row +0 +42 +42 +Connector_PinHeader_2.54mm +PinHeader_2x21_P2.54mm_Vertical +Through hole straight pin header, 2x21, 2.54mm pitch, double rows +Through hole pin header THT 2x21 2.54mm double row +0 +42 +42 +Connector_PinHeader_2.54mm +PinHeader_2x21_P2.54mm_Vertical_SMD +surface-mounted straight pin header, 2x21, 2.54mm pitch, double rows +Surface mounted pin header SMD 2x21 2.54mm double row +0 +42 +42 +Connector_PinHeader_2.54mm +PinHeader_2x22_P2.54mm_Horizontal +Through hole angled pin header, 2x22, 2.54mm pitch, 6mm pin length, double rows +Through hole angled pin header THT 2x22 2.54mm double row +0 +44 +44 +Connector_PinHeader_2.54mm +PinHeader_2x22_P2.54mm_Vertical +Through hole straight pin header, 2x22, 2.54mm pitch, double rows +Through hole pin header THT 2x22 2.54mm double row +0 +44 +44 +Connector_PinHeader_2.54mm +PinHeader_2x22_P2.54mm_Vertical_SMD +surface-mounted straight pin header, 2x22, 2.54mm pitch, double rows +Surface mounted pin header SMD 2x22 2.54mm double row +0 +44 +44 +Connector_PinHeader_2.54mm +PinHeader_2x23_P2.54mm_Horizontal +Through hole angled pin header, 2x23, 2.54mm pitch, 6mm pin length, double rows +Through hole angled pin header THT 2x23 2.54mm double row +0 +46 +46 +Connector_PinHeader_2.54mm +PinHeader_2x23_P2.54mm_Vertical +Through hole straight pin header, 2x23, 2.54mm pitch, double rows +Through hole pin header THT 2x23 2.54mm double row +0 +46 +46 +Connector_PinHeader_2.54mm +PinHeader_2x23_P2.54mm_Vertical_SMD +surface-mounted straight pin header, 2x23, 2.54mm pitch, double rows +Surface mounted pin header SMD 2x23 2.54mm double row +0 +46 +46 +Connector_PinHeader_2.54mm +PinHeader_2x24_P2.54mm_Horizontal +Through hole angled pin header, 2x24, 2.54mm pitch, 6mm pin length, double rows +Through hole angled pin header THT 2x24 2.54mm double row +0 +48 +48 +Connector_PinHeader_2.54mm +PinHeader_2x24_P2.54mm_Vertical +Through hole straight pin header, 2x24, 2.54mm pitch, double rows +Through hole pin header THT 2x24 2.54mm double row +0 +48 +48 +Connector_PinHeader_2.54mm +PinHeader_2x24_P2.54mm_Vertical_SMD +surface-mounted straight pin header, 2x24, 2.54mm pitch, double rows +Surface mounted pin header SMD 2x24 2.54mm double row +0 +48 +48 +Connector_PinHeader_2.54mm +PinHeader_2x25_P2.54mm_Horizontal +Through hole angled pin header, 2x25, 2.54mm pitch, 6mm pin length, double rows +Through hole angled pin header THT 2x25 2.54mm double row +0 +50 +50 +Connector_PinHeader_2.54mm +PinHeader_2x25_P2.54mm_Vertical +Through hole straight pin header, 2x25, 2.54mm pitch, double rows +Through hole pin header THT 2x25 2.54mm double row +0 +50 +50 +Connector_PinHeader_2.54mm +PinHeader_2x25_P2.54mm_Vertical_SMD +surface-mounted straight pin header, 2x25, 2.54mm pitch, double rows +Surface mounted pin header SMD 2x25 2.54mm double row +0 +50 +50 +Connector_PinHeader_2.54mm +PinHeader_2x26_P2.54mm_Horizontal +Through hole angled pin header, 2x26, 2.54mm pitch, 6mm pin length, double rows +Through hole angled pin header THT 2x26 2.54mm double row +0 +52 +52 +Connector_PinHeader_2.54mm +PinHeader_2x26_P2.54mm_Vertical +Through hole straight pin header, 2x26, 2.54mm pitch, double rows +Through hole pin header THT 2x26 2.54mm double row +0 +52 +52 +Connector_PinHeader_2.54mm +PinHeader_2x26_P2.54mm_Vertical_SMD +surface-mounted straight pin header, 2x26, 2.54mm pitch, double rows +Surface mounted pin header SMD 2x26 2.54mm double row +0 +52 +52 +Connector_PinHeader_2.54mm +PinHeader_2x27_P2.54mm_Horizontal +Through hole angled pin header, 2x27, 2.54mm pitch, 6mm pin length, double rows +Through hole angled pin header THT 2x27 2.54mm double row +0 +54 +54 +Connector_PinHeader_2.54mm +PinHeader_2x27_P2.54mm_Vertical +Through hole straight pin header, 2x27, 2.54mm pitch, double rows +Through hole pin header THT 2x27 2.54mm double row +0 +54 +54 +Connector_PinHeader_2.54mm +PinHeader_2x27_P2.54mm_Vertical_SMD +surface-mounted straight pin header, 2x27, 2.54mm pitch, double rows +Surface mounted pin header SMD 2x27 2.54mm double row +0 +54 +54 +Connector_PinHeader_2.54mm +PinHeader_2x28_P2.54mm_Horizontal +Through hole angled pin header, 2x28, 2.54mm pitch, 6mm pin length, double rows +Through hole angled pin header THT 2x28 2.54mm double row +0 +56 +56 +Connector_PinHeader_2.54mm +PinHeader_2x28_P2.54mm_Vertical +Through hole straight pin header, 2x28, 2.54mm pitch, double rows +Through hole pin header THT 2x28 2.54mm double row +0 +56 +56 +Connector_PinHeader_2.54mm +PinHeader_2x28_P2.54mm_Vertical_SMD +surface-mounted straight pin header, 2x28, 2.54mm pitch, double rows +Surface mounted pin header SMD 2x28 2.54mm double row +0 +56 +56 +Connector_PinHeader_2.54mm +PinHeader_2x29_P2.54mm_Horizontal +Through hole angled pin header, 2x29, 2.54mm pitch, 6mm pin length, double rows +Through hole angled pin header THT 2x29 2.54mm double row +0 +58 +58 +Connector_PinHeader_2.54mm +PinHeader_2x29_P2.54mm_Vertical +Through hole straight pin header, 2x29, 2.54mm pitch, double rows +Through hole pin header THT 2x29 2.54mm double row +0 +58 +58 +Connector_PinHeader_2.54mm +PinHeader_2x29_P2.54mm_Vertical_SMD +surface-mounted straight pin header, 2x29, 2.54mm pitch, double rows +Surface mounted pin header SMD 2x29 2.54mm double row +0 +58 +58 +Connector_PinHeader_2.54mm +PinHeader_2x30_P2.54mm_Horizontal +Through hole angled pin header, 2x30, 2.54mm pitch, 6mm pin length, double rows +Through hole angled pin header THT 2x30 2.54mm double row +0 +60 +60 +Connector_PinHeader_2.54mm +PinHeader_2x30_P2.54mm_Vertical +Through hole straight pin header, 2x30, 2.54mm pitch, double rows +Through hole pin header THT 2x30 2.54mm double row +0 +60 +60 +Connector_PinHeader_2.54mm +PinHeader_2x30_P2.54mm_Vertical_SMD +surface-mounted straight pin header, 2x30, 2.54mm pitch, double rows +Surface mounted pin header SMD 2x30 2.54mm double row +0 +60 +60 +Connector_PinHeader_2.54mm +PinHeader_2x31_P2.54mm_Horizontal +Through hole angled pin header, 2x31, 2.54mm pitch, 6mm pin length, double rows +Through hole angled pin header THT 2x31 2.54mm double row +0 +62 +62 +Connector_PinHeader_2.54mm +PinHeader_2x31_P2.54mm_Vertical +Through hole straight pin header, 2x31, 2.54mm pitch, double rows +Through hole pin header THT 2x31 2.54mm double row +0 +62 +62 +Connector_PinHeader_2.54mm +PinHeader_2x31_P2.54mm_Vertical_SMD +surface-mounted straight pin header, 2x31, 2.54mm pitch, double rows +Surface mounted pin header SMD 2x31 2.54mm double row +0 +62 +62 +Connector_PinHeader_2.54mm +PinHeader_2x32_P2.54mm_Horizontal +Through hole angled pin header, 2x32, 2.54mm pitch, 6mm pin length, double rows +Through hole angled pin header THT 2x32 2.54mm double row +0 +64 +64 +Connector_PinHeader_2.54mm +PinHeader_2x32_P2.54mm_Vertical +Through hole straight pin header, 2x32, 2.54mm pitch, double rows +Through hole pin header THT 2x32 2.54mm double row +0 +64 +64 +Connector_PinHeader_2.54mm +PinHeader_2x32_P2.54mm_Vertical_SMD +surface-mounted straight pin header, 2x32, 2.54mm pitch, double rows +Surface mounted pin header SMD 2x32 2.54mm double row +0 +64 +64 +Connector_PinHeader_2.54mm +PinHeader_2x33_P2.54mm_Horizontal +Through hole angled pin header, 2x33, 2.54mm pitch, 6mm pin length, double rows +Through hole angled pin header THT 2x33 2.54mm double row +0 +66 +66 +Connector_PinHeader_2.54mm +PinHeader_2x33_P2.54mm_Vertical +Through hole straight pin header, 2x33, 2.54mm pitch, double rows +Through hole pin header THT 2x33 2.54mm double row +0 +66 +66 +Connector_PinHeader_2.54mm +PinHeader_2x33_P2.54mm_Vertical_SMD +surface-mounted straight pin header, 2x33, 2.54mm pitch, double rows +Surface mounted pin header SMD 2x33 2.54mm double row +0 +66 +66 +Connector_PinHeader_2.54mm +PinHeader_2x34_P2.54mm_Horizontal +Through hole angled pin header, 2x34, 2.54mm pitch, 6mm pin length, double rows +Through hole angled pin header THT 2x34 2.54mm double row +0 +68 +68 +Connector_PinHeader_2.54mm +PinHeader_2x34_P2.54mm_Vertical +Through hole straight pin header, 2x34, 2.54mm pitch, double rows +Through hole pin header THT 2x34 2.54mm double row +0 +68 +68 +Connector_PinHeader_2.54mm +PinHeader_2x34_P2.54mm_Vertical_SMD +surface-mounted straight pin header, 2x34, 2.54mm pitch, double rows +Surface mounted pin header SMD 2x34 2.54mm double row +0 +68 +68 +Connector_PinHeader_2.54mm +PinHeader_2x35_P2.54mm_Horizontal +Through hole angled pin header, 2x35, 2.54mm pitch, 6mm pin length, double rows +Through hole angled pin header THT 2x35 2.54mm double row +0 +70 +70 +Connector_PinHeader_2.54mm +PinHeader_2x35_P2.54mm_Vertical +Through hole straight pin header, 2x35, 2.54mm pitch, double rows +Through hole pin header THT 2x35 2.54mm double row +0 +70 +70 +Connector_PinHeader_2.54mm +PinHeader_2x35_P2.54mm_Vertical_SMD +surface-mounted straight pin header, 2x35, 2.54mm pitch, double rows +Surface mounted pin header SMD 2x35 2.54mm double row +0 +70 +70 +Connector_PinHeader_2.54mm +PinHeader_2x36_P2.54mm_Horizontal +Through hole angled pin header, 2x36, 2.54mm pitch, 6mm pin length, double rows +Through hole angled pin header THT 2x36 2.54mm double row +0 +72 +72 +Connector_PinHeader_2.54mm +PinHeader_2x36_P2.54mm_Vertical +Through hole straight pin header, 2x36, 2.54mm pitch, double rows +Through hole pin header THT 2x36 2.54mm double row +0 +72 +72 +Connector_PinHeader_2.54mm +PinHeader_2x36_P2.54mm_Vertical_SMD +surface-mounted straight pin header, 2x36, 2.54mm pitch, double rows +Surface mounted pin header SMD 2x36 2.54mm double row +0 +72 +72 +Connector_PinHeader_2.54mm +PinHeader_2x37_P2.54mm_Horizontal +Through hole angled pin header, 2x37, 2.54mm pitch, 6mm pin length, double rows +Through hole angled pin header THT 2x37 2.54mm double row +0 +74 +74 +Connector_PinHeader_2.54mm +PinHeader_2x37_P2.54mm_Vertical +Through hole straight pin header, 2x37, 2.54mm pitch, double rows +Through hole pin header THT 2x37 2.54mm double row +0 +74 +74 +Connector_PinHeader_2.54mm +PinHeader_2x37_P2.54mm_Vertical_SMD +surface-mounted straight pin header, 2x37, 2.54mm pitch, double rows +Surface mounted pin header SMD 2x37 2.54mm double row +0 +74 +74 +Connector_PinHeader_2.54mm +PinHeader_2x38_P2.54mm_Horizontal +Through hole angled pin header, 2x38, 2.54mm pitch, 6mm pin length, double rows +Through hole angled pin header THT 2x38 2.54mm double row +0 +76 +76 +Connector_PinHeader_2.54mm +PinHeader_2x38_P2.54mm_Vertical +Through hole straight pin header, 2x38, 2.54mm pitch, double rows +Through hole pin header THT 2x38 2.54mm double row +0 +76 +76 +Connector_PinHeader_2.54mm +PinHeader_2x38_P2.54mm_Vertical_SMD +surface-mounted straight pin header, 2x38, 2.54mm pitch, double rows +Surface mounted pin header SMD 2x38 2.54mm double row +0 +76 +76 +Connector_PinHeader_2.54mm +PinHeader_2x39_P2.54mm_Horizontal +Through hole angled pin header, 2x39, 2.54mm pitch, 6mm pin length, double rows +Through hole angled pin header THT 2x39 2.54mm double row +0 +78 +78 +Connector_PinHeader_2.54mm +PinHeader_2x39_P2.54mm_Vertical +Through hole straight pin header, 2x39, 2.54mm pitch, double rows +Through hole pin header THT 2x39 2.54mm double row +0 +78 +78 +Connector_PinHeader_2.54mm +PinHeader_2x39_P2.54mm_Vertical_SMD +surface-mounted straight pin header, 2x39, 2.54mm pitch, double rows +Surface mounted pin header SMD 2x39 2.54mm double row +0 +78 +78 +Connector_PinHeader_2.54mm +PinHeader_2x40_P2.54mm_Horizontal +Through hole angled pin header, 2x40, 2.54mm pitch, 6mm pin length, double rows +Through hole angled pin header THT 2x40 2.54mm double row +0 +80 +80 +Connector_PinHeader_2.54mm +PinHeader_2x40_P2.54mm_Vertical +Through hole straight pin header, 2x40, 2.54mm pitch, double rows +Through hole pin header THT 2x40 2.54mm double row +0 +80 +80 +Connector_PinHeader_2.54mm +PinHeader_2x40_P2.54mm_Vertical_SMD +surface-mounted straight pin header, 2x40, 2.54mm pitch, double rows +Surface mounted pin header SMD 2x40 2.54mm double row +0 +80 +80 +Connector_PinSocket_1.00mm +PinSocket_1x02_P1.00mm_Vertical +Through hole straight socket strip, 1x02, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated +Through hole socket strip THT 1x02 1.00mm single row +0 +2 +2 +Connector_PinSocket_1.00mm +PinSocket_1x02_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x02, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x02 1.00mm single row style1 pin1 left +0 +2 +2 +Connector_PinSocket_1.00mm +PinSocket_1x02_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x02, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x02 1.00mm single row style2 pin1 right +0 +2 +2 +Connector_PinSocket_1.00mm +PinSocket_1x03_P1.00mm_Vertical +Through hole straight socket strip, 1x03, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated +Through hole socket strip THT 1x03 1.00mm single row +0 +3 +3 +Connector_PinSocket_1.00mm +PinSocket_1x03_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x03, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x03 1.00mm single row style1 pin1 left +0 +3 +3 +Connector_PinSocket_1.00mm +PinSocket_1x03_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x03, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x03 1.00mm single row style2 pin1 right +0 +3 +3 +Connector_PinSocket_1.00mm +PinSocket_1x04_P1.00mm_Vertical +Through hole straight socket strip, 1x04, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated +Through hole socket strip THT 1x04 1.00mm single row +0 +4 +4 +Connector_PinSocket_1.00mm +PinSocket_1x04_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x04, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x04 1.00mm single row style1 pin1 left +0 +4 +4 +Connector_PinSocket_1.00mm +PinSocket_1x04_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x04, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x04 1.00mm single row style2 pin1 right +0 +4 +4 +Connector_PinSocket_1.00mm +PinSocket_1x05_P1.00mm_Vertical +Through hole straight socket strip, 1x05, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated +Through hole socket strip THT 1x05 1.00mm single row +0 +5 +5 +Connector_PinSocket_1.00mm +PinSocket_1x05_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x05, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x05 1.00mm single row style1 pin1 left +0 +5 +5 +Connector_PinSocket_1.00mm +PinSocket_1x05_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x05, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x05 1.00mm single row style2 pin1 right +0 +5 +5 +Connector_PinSocket_1.00mm +PinSocket_1x06_P1.00mm_Vertical +Through hole straight socket strip, 1x06, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated +Through hole socket strip THT 1x06 1.00mm single row +0 +6 +6 +Connector_PinSocket_1.00mm +PinSocket_1x06_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x06, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x06 1.00mm single row style1 pin1 left +0 +6 +6 +Connector_PinSocket_1.00mm +PinSocket_1x06_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x06, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x06 1.00mm single row style2 pin1 right +0 +6 +6 +Connector_PinSocket_1.00mm +PinSocket_1x07_P1.00mm_Vertical +Through hole straight socket strip, 1x07, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated +Through hole socket strip THT 1x07 1.00mm single row +0 +7 +7 +Connector_PinSocket_1.00mm +PinSocket_1x07_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x07, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x07 1.00mm single row style1 pin1 left +0 +7 +7 +Connector_PinSocket_1.00mm +PinSocket_1x07_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x07, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x07 1.00mm single row style2 pin1 right +0 +7 +7 +Connector_PinSocket_1.00mm +PinSocket_1x08_P1.00mm_Vertical +Through hole straight socket strip, 1x08, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated +Through hole socket strip THT 1x08 1.00mm single row +0 +8 +8 +Connector_PinSocket_1.00mm +PinSocket_1x08_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x08, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x08 1.00mm single row style1 pin1 left +0 +8 +8 +Connector_PinSocket_1.00mm +PinSocket_1x08_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x08, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x08 1.00mm single row style2 pin1 right +0 +8 +8 +Connector_PinSocket_1.00mm +PinSocket_1x09_P1.00mm_Vertical +Through hole straight socket strip, 1x09, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated +Through hole socket strip THT 1x09 1.00mm single row +0 +9 +9 +Connector_PinSocket_1.00mm +PinSocket_1x09_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x09, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x09 1.00mm single row style1 pin1 left +0 +9 +9 +Connector_PinSocket_1.00mm +PinSocket_1x09_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x09, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x09 1.00mm single row style2 pin1 right +0 +9 +9 +Connector_PinSocket_1.00mm +PinSocket_1x10_P1.00mm_Vertical +Through hole straight socket strip, 1x10, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated +Through hole socket strip THT 1x10 1.00mm single row +0 +10 +10 +Connector_PinSocket_1.00mm +PinSocket_1x10_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x10, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x10 1.00mm single row style1 pin1 left +0 +10 +10 +Connector_PinSocket_1.00mm +PinSocket_1x10_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x10, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x10 1.00mm single row style2 pin1 right +0 +10 +10 +Connector_PinSocket_1.00mm +PinSocket_1x11_P1.00mm_Vertical +Through hole straight socket strip, 1x11, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated +Through hole socket strip THT 1x11 1.00mm single row +0 +11 +11 +Connector_PinSocket_1.00mm +PinSocket_1x11_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x11, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x11 1.00mm single row style1 pin1 left +0 +11 +11 +Connector_PinSocket_1.00mm +PinSocket_1x11_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x11, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x11 1.00mm single row style2 pin1 right +0 +11 +11 +Connector_PinSocket_1.00mm +PinSocket_1x12_P1.00mm_Vertical +Through hole straight socket strip, 1x12, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated +Through hole socket strip THT 1x12 1.00mm single row +0 +12 +12 +Connector_PinSocket_1.00mm +PinSocket_1x12_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x12, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x12 1.00mm single row style1 pin1 left +0 +12 +12 +Connector_PinSocket_1.00mm +PinSocket_1x12_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x12, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x12 1.00mm single row style2 pin1 right +0 +12 +12 +Connector_PinSocket_1.00mm +PinSocket_1x13_P1.00mm_Vertical +Through hole straight socket strip, 1x13, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated +Through hole socket strip THT 1x13 1.00mm single row +0 +13 +13 +Connector_PinSocket_1.00mm +PinSocket_1x13_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x13, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x13 1.00mm single row style1 pin1 left +0 +13 +13 +Connector_PinSocket_1.00mm +PinSocket_1x13_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x13, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x13 1.00mm single row style2 pin1 right +0 +13 +13 +Connector_PinSocket_1.00mm +PinSocket_1x14_P1.00mm_Vertical +Through hole straight socket strip, 1x14, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated +Through hole socket strip THT 1x14 1.00mm single row +0 +14 +14 +Connector_PinSocket_1.00mm +PinSocket_1x14_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x14, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x14 1.00mm single row style1 pin1 left +0 +14 +14 +Connector_PinSocket_1.00mm +PinSocket_1x14_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x14, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x14 1.00mm single row style2 pin1 right +0 +14 +14 +Connector_PinSocket_1.00mm +PinSocket_1x15_P1.00mm_Vertical +Through hole straight socket strip, 1x15, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated +Through hole socket strip THT 1x15 1.00mm single row +0 +15 +15 +Connector_PinSocket_1.00mm +PinSocket_1x15_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x15, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x15 1.00mm single row style1 pin1 left +0 +15 +15 +Connector_PinSocket_1.00mm +PinSocket_1x15_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x15, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x15 1.00mm single row style2 pin1 right +0 +15 +15 +Connector_PinSocket_1.00mm +PinSocket_1x16_P1.00mm_Vertical +Through hole straight socket strip, 1x16, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated +Through hole socket strip THT 1x16 1.00mm single row +0 +16 +16 +Connector_PinSocket_1.00mm +PinSocket_1x16_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x16, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x16 1.00mm single row style1 pin1 left +0 +16 +16 +Connector_PinSocket_1.00mm +PinSocket_1x16_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x16, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x16 1.00mm single row style2 pin1 right +0 +16 +16 +Connector_PinSocket_1.00mm +PinSocket_1x17_P1.00mm_Vertical +Through hole straight socket strip, 1x17, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated +Through hole socket strip THT 1x17 1.00mm single row +0 +17 +17 +Connector_PinSocket_1.00mm +PinSocket_1x17_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x17, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x17 1.00mm single row style1 pin1 left +0 +17 +17 +Connector_PinSocket_1.00mm +PinSocket_1x17_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x17, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x17 1.00mm single row style2 pin1 right +0 +17 +17 +Connector_PinSocket_1.00mm +PinSocket_1x18_P1.00mm_Vertical +Through hole straight socket strip, 1x18, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated +Through hole socket strip THT 1x18 1.00mm single row +0 +18 +18 +Connector_PinSocket_1.00mm +PinSocket_1x18_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x18, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x18 1.00mm single row style1 pin1 left +0 +18 +18 +Connector_PinSocket_1.00mm +PinSocket_1x18_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x18, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x18 1.00mm single row style2 pin1 right +0 +18 +18 +Connector_PinSocket_1.00mm +PinSocket_1x19_P1.00mm_Vertical +Through hole straight socket strip, 1x19, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated +Through hole socket strip THT 1x19 1.00mm single row +0 +19 +19 +Connector_PinSocket_1.00mm +PinSocket_1x19_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x19, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x19 1.00mm single row style1 pin1 left +0 +19 +19 +Connector_PinSocket_1.00mm +PinSocket_1x19_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x19, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x19 1.00mm single row style2 pin1 right +0 +19 +19 +Connector_PinSocket_1.00mm +PinSocket_1x20_P1.00mm_Vertical +Through hole straight socket strip, 1x20, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated +Through hole socket strip THT 1x20 1.00mm single row +0 +20 +20 +Connector_PinSocket_1.00mm +PinSocket_1x20_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x20, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x20 1.00mm single row style1 pin1 left +0 +20 +20 +Connector_PinSocket_1.00mm +PinSocket_1x20_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x20, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x20 1.00mm single row style2 pin1 right +0 +20 +20 +Connector_PinSocket_1.00mm +PinSocket_1x21_P1.00mm_Vertical +Through hole straight socket strip, 1x21, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated +Through hole socket strip THT 1x21 1.00mm single row +0 +21 +21 +Connector_PinSocket_1.00mm +PinSocket_1x21_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x21, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x21 1.00mm single row style1 pin1 left +0 +21 +21 +Connector_PinSocket_1.00mm +PinSocket_1x21_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x21, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x21 1.00mm single row style2 pin1 right +0 +21 +21 +Connector_PinSocket_1.00mm +PinSocket_1x22_P1.00mm_Vertical +Through hole straight socket strip, 1x22, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated +Through hole socket strip THT 1x22 1.00mm single row +0 +22 +22 +Connector_PinSocket_1.00mm +PinSocket_1x22_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x22, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x22 1.00mm single row style1 pin1 left +0 +22 +22 +Connector_PinSocket_1.00mm +PinSocket_1x22_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x22, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x22 1.00mm single row style2 pin1 right +0 +22 +22 +Connector_PinSocket_1.00mm +PinSocket_1x23_P1.00mm_Vertical +Through hole straight socket strip, 1x23, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated +Through hole socket strip THT 1x23 1.00mm single row +0 +23 +23 +Connector_PinSocket_1.00mm +PinSocket_1x23_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x23, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x23 1.00mm single row style1 pin1 left +0 +23 +23 +Connector_PinSocket_1.00mm +PinSocket_1x23_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x23, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x23 1.00mm single row style2 pin1 right +0 +23 +23 +Connector_PinSocket_1.00mm +PinSocket_1x24_P1.00mm_Vertical +Through hole straight socket strip, 1x24, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated +Through hole socket strip THT 1x24 1.00mm single row +0 +24 +24 +Connector_PinSocket_1.00mm +PinSocket_1x24_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x24, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x24 1.00mm single row style1 pin1 left +0 +24 +24 +Connector_PinSocket_1.00mm +PinSocket_1x24_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x24, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x24 1.00mm single row style2 pin1 right +0 +24 +24 +Connector_PinSocket_1.00mm +PinSocket_1x25_P1.00mm_Vertical +Through hole straight socket strip, 1x25, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated +Through hole socket strip THT 1x25 1.00mm single row +0 +25 +25 +Connector_PinSocket_1.00mm +PinSocket_1x25_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x25, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x25 1.00mm single row style1 pin1 left +0 +25 +25 +Connector_PinSocket_1.00mm +PinSocket_1x25_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x25, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x25 1.00mm single row style2 pin1 right +0 +25 +25 +Connector_PinSocket_1.00mm +PinSocket_1x26_P1.00mm_Vertical +Through hole straight socket strip, 1x26, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated +Through hole socket strip THT 1x26 1.00mm single row +0 +26 +26 +Connector_PinSocket_1.00mm +PinSocket_1x26_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x26, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x26 1.00mm single row style1 pin1 left +0 +26 +26 +Connector_PinSocket_1.00mm +PinSocket_1x26_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x26, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x26 1.00mm single row style2 pin1 right +0 +26 +26 +Connector_PinSocket_1.00mm +PinSocket_1x27_P1.00mm_Vertical +Through hole straight socket strip, 1x27, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated +Through hole socket strip THT 1x27 1.00mm single row +0 +27 +27 +Connector_PinSocket_1.00mm +PinSocket_1x27_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x27, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x27 1.00mm single row style1 pin1 left +0 +27 +27 +Connector_PinSocket_1.00mm +PinSocket_1x27_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x27, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x27 1.00mm single row style2 pin1 right +0 +27 +27 +Connector_PinSocket_1.00mm +PinSocket_1x28_P1.00mm_Vertical +Through hole straight socket strip, 1x28, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated +Through hole socket strip THT 1x28 1.00mm single row +0 +28 +28 +Connector_PinSocket_1.00mm +PinSocket_1x28_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x28, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x28 1.00mm single row style1 pin1 left +0 +28 +28 +Connector_PinSocket_1.00mm +PinSocket_1x28_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x28, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x28 1.00mm single row style2 pin1 right +0 +28 +28 +Connector_PinSocket_1.00mm +PinSocket_1x29_P1.00mm_Vertical +Through hole straight socket strip, 1x29, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated +Through hole socket strip THT 1x29 1.00mm single row +0 +29 +29 +Connector_PinSocket_1.00mm +PinSocket_1x29_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x29, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x29 1.00mm single row style1 pin1 left +0 +29 +29 +Connector_PinSocket_1.00mm +PinSocket_1x29_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x29, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x29 1.00mm single row style2 pin1 right +0 +29 +29 +Connector_PinSocket_1.00mm +PinSocket_1x30_P1.00mm_Vertical +Through hole straight socket strip, 1x30, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated +Through hole socket strip THT 1x30 1.00mm single row +0 +30 +30 +Connector_PinSocket_1.00mm +PinSocket_1x30_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x30, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x30 1.00mm single row style1 pin1 left +0 +30 +30 +Connector_PinSocket_1.00mm +PinSocket_1x30_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x30, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x30 1.00mm single row style2 pin1 right +0 +30 +30 +Connector_PinSocket_1.00mm +PinSocket_1x31_P1.00mm_Vertical +Through hole straight socket strip, 1x31, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated +Through hole socket strip THT 1x31 1.00mm single row +0 +31 +31 +Connector_PinSocket_1.00mm +PinSocket_1x31_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x31, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x31 1.00mm single row style1 pin1 left +0 +31 +31 +Connector_PinSocket_1.00mm +PinSocket_1x31_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x31, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x31 1.00mm single row style2 pin1 right +0 +31 +31 +Connector_PinSocket_1.00mm +PinSocket_1x32_P1.00mm_Vertical +Through hole straight socket strip, 1x32, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated +Through hole socket strip THT 1x32 1.00mm single row +0 +32 +32 +Connector_PinSocket_1.00mm +PinSocket_1x32_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x32, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x32 1.00mm single row style1 pin1 left +0 +32 +32 +Connector_PinSocket_1.00mm +PinSocket_1x32_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x32, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x32 1.00mm single row style2 pin1 right +0 +32 +32 +Connector_PinSocket_1.00mm +PinSocket_1x33_P1.00mm_Vertical +Through hole straight socket strip, 1x33, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated +Through hole socket strip THT 1x33 1.00mm single row +0 +33 +33 +Connector_PinSocket_1.00mm +PinSocket_1x33_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x33, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x33 1.00mm single row style1 pin1 left +0 +33 +33 +Connector_PinSocket_1.00mm +PinSocket_1x33_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x33, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x33 1.00mm single row style2 pin1 right +0 +33 +33 +Connector_PinSocket_1.00mm +PinSocket_1x34_P1.00mm_Vertical +Through hole straight socket strip, 1x34, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated +Through hole socket strip THT 1x34 1.00mm single row +0 +34 +34 +Connector_PinSocket_1.00mm +PinSocket_1x34_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x34, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x34 1.00mm single row style1 pin1 left +0 +34 +34 +Connector_PinSocket_1.00mm +PinSocket_1x34_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x34, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x34 1.00mm single row style2 pin1 right +0 +34 +34 +Connector_PinSocket_1.00mm +PinSocket_1x35_P1.00mm_Vertical +Through hole straight socket strip, 1x35, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated +Through hole socket strip THT 1x35 1.00mm single row +0 +35 +35 +Connector_PinSocket_1.00mm +PinSocket_1x35_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x35, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x35 1.00mm single row style1 pin1 left +0 +35 +35 +Connector_PinSocket_1.00mm +PinSocket_1x35_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x35, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x35 1.00mm single row style2 pin1 right +0 +35 +35 +Connector_PinSocket_1.00mm +PinSocket_1x36_P1.00mm_Vertical +Through hole straight socket strip, 1x36, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated +Through hole socket strip THT 1x36 1.00mm single row +0 +36 +36 +Connector_PinSocket_1.00mm +PinSocket_1x36_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x36, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x36 1.00mm single row style1 pin1 left +0 +36 +36 +Connector_PinSocket_1.00mm +PinSocket_1x36_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x36, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x36 1.00mm single row style2 pin1 right +0 +36 +36 +Connector_PinSocket_1.00mm +PinSocket_1x37_P1.00mm_Vertical +Through hole straight socket strip, 1x37, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated +Through hole socket strip THT 1x37 1.00mm single row +0 +37 +37 +Connector_PinSocket_1.00mm +PinSocket_1x37_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x37, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x37 1.00mm single row style1 pin1 left +0 +37 +37 +Connector_PinSocket_1.00mm +PinSocket_1x37_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x37, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x37 1.00mm single row style2 pin1 right +0 +37 +37 +Connector_PinSocket_1.00mm +PinSocket_1x38_P1.00mm_Vertical +Through hole straight socket strip, 1x38, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated +Through hole socket strip THT 1x38 1.00mm single row +0 +38 +38 +Connector_PinSocket_1.00mm +PinSocket_1x38_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x38, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x38 1.00mm single row style1 pin1 left +0 +38 +38 +Connector_PinSocket_1.00mm +PinSocket_1x38_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x38, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x38 1.00mm single row style2 pin1 right +0 +38 +38 +Connector_PinSocket_1.00mm +PinSocket_1x39_P1.00mm_Vertical +Through hole straight socket strip, 1x39, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated +Through hole socket strip THT 1x39 1.00mm single row +0 +39 +39 +Connector_PinSocket_1.00mm +PinSocket_1x39_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x39, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x39 1.00mm single row style1 pin1 left +0 +39 +39 +Connector_PinSocket_1.00mm +PinSocket_1x39_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x39, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x39 1.00mm single row style2 pin1 right +0 +39 +39 +Connector_PinSocket_1.00mm +PinSocket_1x40_P1.00mm_Vertical +Through hole straight socket strip, 1x40, 1.00mm pitch, single row (https://gct.co/files/drawings/bc065.pdf), script generated +Through hole socket strip THT 1x40 1.00mm single row +0 +40 +40 +Connector_PinSocket_1.00mm +PinSocket_1x40_P1.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x40, 1.00mm pitch, single row, style 1 (pin 1 left) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x40 1.00mm single row style1 pin1 left +0 +40 +40 +Connector_PinSocket_1.00mm +PinSocket_1x40_P1.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x40, 1.00mm pitch, single row, style 2 (pin 1 right) (https://gct.co/files/drawings/bc070.pdf), script generated +Surface mounted socket strip SMD 1x40 1.00mm single row style2 pin1 right +0 +40 +40 +Connector_PinSocket_1.00mm +PinSocket_2x02_P1.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x02, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated +Surface mounted socket strip SMD 2x02 1.00mm double row +0 +4 +4 +Connector_PinSocket_1.00mm +PinSocket_2x03_P1.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x03, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated +Surface mounted socket strip SMD 2x03 1.00mm double row +0 +6 +6 +Connector_PinSocket_1.00mm +PinSocket_2x04_P1.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x04, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated +Surface mounted socket strip SMD 2x04 1.00mm double row +0 +8 +8 +Connector_PinSocket_1.00mm +PinSocket_2x05_P1.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x05, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated +Surface mounted socket strip SMD 2x05 1.00mm double row +0 +10 +10 +Connector_PinSocket_1.00mm +PinSocket_2x06_P1.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x06, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated +Surface mounted socket strip SMD 2x06 1.00mm double row +0 +12 +12 +Connector_PinSocket_1.00mm +PinSocket_2x07_P1.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x07, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated +Surface mounted socket strip SMD 2x07 1.00mm double row +0 +14 +14 +Connector_PinSocket_1.00mm +PinSocket_2x08_P1.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x08, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated +Surface mounted socket strip SMD 2x08 1.00mm double row +0 +16 +16 +Connector_PinSocket_1.00mm +PinSocket_2x09_P1.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x09, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated +Surface mounted socket strip SMD 2x09 1.00mm double row +0 +18 +18 +Connector_PinSocket_1.00mm +PinSocket_2x10_P1.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x10, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated +Surface mounted socket strip SMD 2x10 1.00mm double row +0 +20 +20 +Connector_PinSocket_1.00mm +PinSocket_2x11_P1.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x11, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated +Surface mounted socket strip SMD 2x11 1.00mm double row +0 +22 +22 +Connector_PinSocket_1.00mm +PinSocket_2x12_P1.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x12, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated +Surface mounted socket strip SMD 2x12 1.00mm double row +0 +24 +24 +Connector_PinSocket_1.00mm +PinSocket_2x13_P1.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x13, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated +Surface mounted socket strip SMD 2x13 1.00mm double row +0 +26 +26 +Connector_PinSocket_1.00mm +PinSocket_2x14_P1.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x14, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated +Surface mounted socket strip SMD 2x14 1.00mm double row +0 +28 +28 +Connector_PinSocket_1.00mm +PinSocket_2x15_P1.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x15, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated +Surface mounted socket strip SMD 2x15 1.00mm double row +0 +30 +30 +Connector_PinSocket_1.00mm +PinSocket_2x16_P1.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x16, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated +Surface mounted socket strip SMD 2x16 1.00mm double row +0 +32 +32 +Connector_PinSocket_1.00mm +PinSocket_2x17_P1.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x17, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated +Surface mounted socket strip SMD 2x17 1.00mm double row +0 +34 +34 +Connector_PinSocket_1.00mm +PinSocket_2x18_P1.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x18, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated +Surface mounted socket strip SMD 2x18 1.00mm double row +0 +36 +36 +Connector_PinSocket_1.00mm +PinSocket_2x19_P1.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x19, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated +Surface mounted socket strip SMD 2x19 1.00mm double row +0 +38 +38 +Connector_PinSocket_1.00mm +PinSocket_2x20_P1.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x20, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated +Surface mounted socket strip SMD 2x20 1.00mm double row +0 +40 +40 +Connector_PinSocket_1.00mm +PinSocket_2x21_P1.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x21, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated +Surface mounted socket strip SMD 2x21 1.00mm double row +0 +42 +42 +Connector_PinSocket_1.00mm +PinSocket_2x22_P1.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x22, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated +Surface mounted socket strip SMD 2x22 1.00mm double row +0 +44 +44 +Connector_PinSocket_1.00mm +PinSocket_2x23_P1.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x23, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated +Surface mounted socket strip SMD 2x23 1.00mm double row +0 +46 +46 +Connector_PinSocket_1.00mm +PinSocket_2x24_P1.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x24, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated +Surface mounted socket strip SMD 2x24 1.00mm double row +0 +48 +48 +Connector_PinSocket_1.00mm +PinSocket_2x25_P1.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x25, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated +Surface mounted socket strip SMD 2x25 1.00mm double row +0 +50 +50 +Connector_PinSocket_1.00mm +PinSocket_2x26_P1.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x26, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated +Surface mounted socket strip SMD 2x26 1.00mm double row +0 +52 +52 +Connector_PinSocket_1.00mm +PinSocket_2x27_P1.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x27, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated +Surface mounted socket strip SMD 2x27 1.00mm double row +0 +54 +54 +Connector_PinSocket_1.00mm +PinSocket_2x28_P1.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x28, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated +Surface mounted socket strip SMD 2x28 1.00mm double row +0 +56 +56 +Connector_PinSocket_1.00mm +PinSocket_2x29_P1.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x29, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated +Surface mounted socket strip SMD 2x29 1.00mm double row +0 +58 +58 +Connector_PinSocket_1.00mm +PinSocket_2x30_P1.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x30, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated +Surface mounted socket strip SMD 2x30 1.00mm double row +0 +60 +60 +Connector_PinSocket_1.00mm +PinSocket_2x31_P1.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x31, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated +Surface mounted socket strip SMD 2x31 1.00mm double row +0 +62 +62 +Connector_PinSocket_1.00mm +PinSocket_2x32_P1.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x32, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated +Surface mounted socket strip SMD 2x32 1.00mm double row +0 +64 +64 +Connector_PinSocket_1.00mm +PinSocket_2x33_P1.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x33, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated +Surface mounted socket strip SMD 2x33 1.00mm double row +0 +66 +66 +Connector_PinSocket_1.00mm +PinSocket_2x34_P1.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x34, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated +Surface mounted socket strip SMD 2x34 1.00mm double row +0 +68 +68 +Connector_PinSocket_1.00mm +PinSocket_2x35_P1.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x35, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated +Surface mounted socket strip SMD 2x35 1.00mm double row +0 +70 +70 +Connector_PinSocket_1.00mm +PinSocket_2x36_P1.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x36, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated +Surface mounted socket strip SMD 2x36 1.00mm double row +0 +72 +72 +Connector_PinSocket_1.00mm +PinSocket_2x37_P1.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x37, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated +Surface mounted socket strip SMD 2x37 1.00mm double row +0 +74 +74 +Connector_PinSocket_1.00mm +PinSocket_2x38_P1.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x38, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated +Surface mounted socket strip SMD 2x38 1.00mm double row +0 +76 +76 +Connector_PinSocket_1.00mm +PinSocket_2x39_P1.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x39, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated +Surface mounted socket strip SMD 2x39 1.00mm double row +0 +78 +78 +Connector_PinSocket_1.00mm +PinSocket_2x40_P1.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x40, 1.00mm pitch, double cols (https://gct.co/files/drawings/bc085.pdf), script generated +Surface mounted socket strip SMD 2x40 1.00mm double row +0 +80 +80 +Connector_PinSocket_1.27mm +PinSocket_1x01_P1.27mm_Vertical +Through hole straight socket strip, 1x01, 1.27mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x01 1.27mm single row +0 +1 +1 +Connector_PinSocket_1.27mm +PinSocket_1x02_P1.27mm_Vertical +Through hole straight socket strip, 1x02, 1.27mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x02 1.27mm single row +0 +2 +2 +Connector_PinSocket_1.27mm +PinSocket_1x02_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x02, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x02 1.27mm single row style1 pin1 left +0 +2 +2 +Connector_PinSocket_1.27mm +PinSocket_1x02_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x02, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x02 1.27mm single row style2 pin1 right +0 +2 +2 +Connector_PinSocket_1.27mm +PinSocket_1x03_P1.27mm_Vertical +Through hole straight socket strip, 1x03, 1.27mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x03 1.27mm single row +0 +3 +3 +Connector_PinSocket_1.27mm +PinSocket_1x03_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x03, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x03 1.27mm single row style1 pin1 left +0 +3 +3 +Connector_PinSocket_1.27mm +PinSocket_1x03_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x03, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x03 1.27mm single row style2 pin1 right +0 +3 +3 +Connector_PinSocket_1.27mm +PinSocket_1x04_P1.27mm_Vertical +Through hole straight socket strip, 1x04, 1.27mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x04 1.27mm single row +0 +4 +4 +Connector_PinSocket_1.27mm +PinSocket_1x04_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x04, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x04 1.27mm single row style1 pin1 left +0 +4 +4 +Connector_PinSocket_1.27mm +PinSocket_1x04_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x04, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x04 1.27mm single row style2 pin1 right +0 +4 +4 +Connector_PinSocket_1.27mm +PinSocket_1x05_P1.27mm_Vertical +Through hole straight socket strip, 1x05, 1.27mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x05 1.27mm single row +0 +5 +5 +Connector_PinSocket_1.27mm +PinSocket_1x05_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x05, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x05 1.27mm single row style1 pin1 left +0 +5 +5 +Connector_PinSocket_1.27mm +PinSocket_1x05_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x05, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x05 1.27mm single row style2 pin1 right +0 +5 +5 +Connector_PinSocket_1.27mm +PinSocket_1x06_P1.27mm_Vertical +Through hole straight socket strip, 1x06, 1.27mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x06 1.27mm single row +0 +6 +6 +Connector_PinSocket_1.27mm +PinSocket_1x06_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x06, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x06 1.27mm single row style1 pin1 left +0 +6 +6 +Connector_PinSocket_1.27mm +PinSocket_1x06_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x06, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x06 1.27mm single row style2 pin1 right +0 +6 +6 +Connector_PinSocket_1.27mm +PinSocket_1x07_P1.27mm_Vertical +Through hole straight socket strip, 1x07, 1.27mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x07 1.27mm single row +0 +7 +7 +Connector_PinSocket_1.27mm +PinSocket_1x07_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x07, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x07 1.27mm single row style1 pin1 left +0 +7 +7 +Connector_PinSocket_1.27mm +PinSocket_1x07_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x07, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x07 1.27mm single row style2 pin1 right +0 +7 +7 +Connector_PinSocket_1.27mm +PinSocket_1x08_P1.27mm_Vertical +Through hole straight socket strip, 1x08, 1.27mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x08 1.27mm single row +0 +8 +8 +Connector_PinSocket_1.27mm +PinSocket_1x08_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x08, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x08 1.27mm single row style1 pin1 left +0 +8 +8 +Connector_PinSocket_1.27mm +PinSocket_1x08_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x08, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x08 1.27mm single row style2 pin1 right +0 +8 +8 +Connector_PinSocket_1.27mm +PinSocket_1x09_P1.27mm_Vertical +Through hole straight socket strip, 1x09, 1.27mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x09 1.27mm single row +0 +9 +9 +Connector_PinSocket_1.27mm +PinSocket_1x09_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x09, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x09 1.27mm single row style1 pin1 left +0 +9 +9 +Connector_PinSocket_1.27mm +PinSocket_1x09_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x09, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x09 1.27mm single row style2 pin1 right +0 +9 +9 +Connector_PinSocket_1.27mm +PinSocket_1x10_P1.27mm_Vertical +Through hole straight socket strip, 1x10, 1.27mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x10 1.27mm single row +0 +10 +10 +Connector_PinSocket_1.27mm +PinSocket_1x10_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x10, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x10 1.27mm single row style1 pin1 left +0 +10 +10 +Connector_PinSocket_1.27mm +PinSocket_1x10_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x10, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x10 1.27mm single row style2 pin1 right +0 +10 +10 +Connector_PinSocket_1.27mm +PinSocket_1x11_P1.27mm_Vertical +Through hole straight socket strip, 1x11, 1.27mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x11 1.27mm single row +0 +11 +11 +Connector_PinSocket_1.27mm +PinSocket_1x11_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x11, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x11 1.27mm single row style1 pin1 left +0 +11 +11 +Connector_PinSocket_1.27mm +PinSocket_1x11_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x11, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x11 1.27mm single row style2 pin1 right +0 +11 +11 +Connector_PinSocket_1.27mm +PinSocket_1x12_P1.27mm_Vertical +Through hole straight socket strip, 1x12, 1.27mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x12 1.27mm single row +0 +12 +12 +Connector_PinSocket_1.27mm +PinSocket_1x12_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x12, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x12 1.27mm single row style1 pin1 left +0 +12 +12 +Connector_PinSocket_1.27mm +PinSocket_1x12_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x12, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x12 1.27mm single row style2 pin1 right +0 +12 +12 +Connector_PinSocket_1.27mm +PinSocket_1x13_P1.27mm_Vertical +Through hole straight socket strip, 1x13, 1.27mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x13 1.27mm single row +0 +13 +13 +Connector_PinSocket_1.27mm +PinSocket_1x13_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x13, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x13 1.27mm single row style1 pin1 left +0 +13 +13 +Connector_PinSocket_1.27mm +PinSocket_1x13_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x13, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x13 1.27mm single row style2 pin1 right +0 +13 +13 +Connector_PinSocket_1.27mm +PinSocket_1x14_P1.27mm_Vertical +Through hole straight socket strip, 1x14, 1.27mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x14 1.27mm single row +0 +14 +14 +Connector_PinSocket_1.27mm +PinSocket_1x14_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x14, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x14 1.27mm single row style1 pin1 left +0 +14 +14 +Connector_PinSocket_1.27mm +PinSocket_1x14_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x14, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x14 1.27mm single row style2 pin1 right +0 +14 +14 +Connector_PinSocket_1.27mm +PinSocket_1x15_P1.27mm_Vertical +Through hole straight socket strip, 1x15, 1.27mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x15 1.27mm single row +0 +15 +15 +Connector_PinSocket_1.27mm +PinSocket_1x15_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x15, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x15 1.27mm single row style1 pin1 left +0 +15 +15 +Connector_PinSocket_1.27mm +PinSocket_1x15_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x15, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x15 1.27mm single row style2 pin1 right +0 +15 +15 +Connector_PinSocket_1.27mm +PinSocket_1x16_P1.27mm_Vertical +Through hole straight socket strip, 1x16, 1.27mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x16 1.27mm single row +0 +16 +16 +Connector_PinSocket_1.27mm +PinSocket_1x16_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x16, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x16 1.27mm single row style1 pin1 left +0 +16 +16 +Connector_PinSocket_1.27mm +PinSocket_1x16_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x16, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x16 1.27mm single row style2 pin1 right +0 +16 +16 +Connector_PinSocket_1.27mm +PinSocket_1x17_P1.27mm_Vertical +Through hole straight socket strip, 1x17, 1.27mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x17 1.27mm single row +0 +17 +17 +Connector_PinSocket_1.27mm +PinSocket_1x17_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x17, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x17 1.27mm single row style1 pin1 left +0 +17 +17 +Connector_PinSocket_1.27mm +PinSocket_1x17_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x17, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x17 1.27mm single row style2 pin1 right +0 +17 +17 +Connector_PinSocket_1.27mm +PinSocket_1x18_P1.27mm_Vertical +Through hole straight socket strip, 1x18, 1.27mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x18 1.27mm single row +0 +18 +18 +Connector_PinSocket_1.27mm +PinSocket_1x18_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x18, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x18 1.27mm single row style1 pin1 left +0 +18 +18 +Connector_PinSocket_1.27mm +PinSocket_1x18_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x18, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x18 1.27mm single row style2 pin1 right +0 +18 +18 +Connector_PinSocket_1.27mm +PinSocket_1x19_P1.27mm_Vertical +Through hole straight socket strip, 1x19, 1.27mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x19 1.27mm single row +0 +19 +19 +Connector_PinSocket_1.27mm +PinSocket_1x19_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x19, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x19 1.27mm single row style1 pin1 left +0 +19 +19 +Connector_PinSocket_1.27mm +PinSocket_1x19_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x19, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x19 1.27mm single row style2 pin1 right +0 +19 +19 +Connector_PinSocket_1.27mm +PinSocket_1x20_P1.27mm_Vertical +Through hole straight socket strip, 1x20, 1.27mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x20 1.27mm single row +0 +20 +20 +Connector_PinSocket_1.27mm +PinSocket_1x20_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x20, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x20 1.27mm single row style1 pin1 left +0 +20 +20 +Connector_PinSocket_1.27mm +PinSocket_1x20_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x20, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x20 1.27mm single row style2 pin1 right +0 +20 +20 +Connector_PinSocket_1.27mm +PinSocket_1x21_P1.27mm_Vertical +Through hole straight socket strip, 1x21, 1.27mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x21 1.27mm single row +0 +21 +21 +Connector_PinSocket_1.27mm +PinSocket_1x21_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x21, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x21 1.27mm single row style1 pin1 left +0 +21 +21 +Connector_PinSocket_1.27mm +PinSocket_1x21_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x21, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x21 1.27mm single row style2 pin1 right +0 +21 +21 +Connector_PinSocket_1.27mm +PinSocket_1x22_P1.27mm_Vertical +Through hole straight socket strip, 1x22, 1.27mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x22 1.27mm single row +0 +22 +22 +Connector_PinSocket_1.27mm +PinSocket_1x22_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x22, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x22 1.27mm single row style1 pin1 left +0 +22 +22 +Connector_PinSocket_1.27mm +PinSocket_1x22_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x22, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x22 1.27mm single row style2 pin1 right +0 +22 +22 +Connector_PinSocket_1.27mm +PinSocket_1x23_P1.27mm_Vertical +Through hole straight socket strip, 1x23, 1.27mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x23 1.27mm single row +0 +23 +23 +Connector_PinSocket_1.27mm +PinSocket_1x23_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x23, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x23 1.27mm single row style1 pin1 left +0 +23 +23 +Connector_PinSocket_1.27mm +PinSocket_1x23_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x23, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x23 1.27mm single row style2 pin1 right +0 +23 +23 +Connector_PinSocket_1.27mm +PinSocket_1x24_P1.27mm_Vertical +Through hole straight socket strip, 1x24, 1.27mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x24 1.27mm single row +0 +24 +24 +Connector_PinSocket_1.27mm +PinSocket_1x24_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x24, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x24 1.27mm single row style1 pin1 left +0 +24 +24 +Connector_PinSocket_1.27mm +PinSocket_1x24_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x24, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x24 1.27mm single row style2 pin1 right +0 +24 +24 +Connector_PinSocket_1.27mm +PinSocket_1x25_P1.27mm_Vertical +Through hole straight socket strip, 1x25, 1.27mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x25 1.27mm single row +0 +25 +25 +Connector_PinSocket_1.27mm +PinSocket_1x25_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x25, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x25 1.27mm single row style1 pin1 left +0 +25 +25 +Connector_PinSocket_1.27mm +PinSocket_1x25_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x25, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x25 1.27mm single row style2 pin1 right +0 +25 +25 +Connector_PinSocket_1.27mm +PinSocket_1x26_P1.27mm_Vertical +Through hole straight socket strip, 1x26, 1.27mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x26 1.27mm single row +0 +26 +26 +Connector_PinSocket_1.27mm +PinSocket_1x26_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x26, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x26 1.27mm single row style1 pin1 left +0 +26 +26 +Connector_PinSocket_1.27mm +PinSocket_1x26_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x26, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x26 1.27mm single row style2 pin1 right +0 +26 +26 +Connector_PinSocket_1.27mm +PinSocket_1x27_P1.27mm_Vertical +Through hole straight socket strip, 1x27, 1.27mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x27 1.27mm single row +0 +27 +27 +Connector_PinSocket_1.27mm +PinSocket_1x27_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x27, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x27 1.27mm single row style1 pin1 left +0 +27 +27 +Connector_PinSocket_1.27mm +PinSocket_1x27_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x27, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x27 1.27mm single row style2 pin1 right +0 +27 +27 +Connector_PinSocket_1.27mm +PinSocket_1x28_P1.27mm_Vertical +Through hole straight socket strip, 1x28, 1.27mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x28 1.27mm single row +0 +28 +28 +Connector_PinSocket_1.27mm +PinSocket_1x28_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x28, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x28 1.27mm single row style1 pin1 left +0 +28 +28 +Connector_PinSocket_1.27mm +PinSocket_1x28_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x28, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x28 1.27mm single row style2 pin1 right +0 +28 +28 +Connector_PinSocket_1.27mm +PinSocket_1x29_P1.27mm_Vertical +Through hole straight socket strip, 1x29, 1.27mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x29 1.27mm single row +0 +29 +29 +Connector_PinSocket_1.27mm +PinSocket_1x29_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x29, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x29 1.27mm single row style1 pin1 left +0 +29 +29 +Connector_PinSocket_1.27mm +PinSocket_1x29_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x29, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x29 1.27mm single row style2 pin1 right +0 +29 +29 +Connector_PinSocket_1.27mm +PinSocket_1x30_P1.27mm_Vertical +Through hole straight socket strip, 1x30, 1.27mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x30 1.27mm single row +0 +30 +30 +Connector_PinSocket_1.27mm +PinSocket_1x30_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x30, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x30 1.27mm single row style1 pin1 left +0 +30 +30 +Connector_PinSocket_1.27mm +PinSocket_1x30_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x30, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x30 1.27mm single row style2 pin1 right +0 +30 +30 +Connector_PinSocket_1.27mm +PinSocket_1x31_P1.27mm_Vertical +Through hole straight socket strip, 1x31, 1.27mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x31 1.27mm single row +0 +31 +31 +Connector_PinSocket_1.27mm +PinSocket_1x31_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x31, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x31 1.27mm single row style1 pin1 left +0 +31 +31 +Connector_PinSocket_1.27mm +PinSocket_1x31_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x31, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x31 1.27mm single row style2 pin1 right +0 +31 +31 +Connector_PinSocket_1.27mm +PinSocket_1x32_P1.27mm_Vertical +Through hole straight socket strip, 1x32, 1.27mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x32 1.27mm single row +0 +32 +32 +Connector_PinSocket_1.27mm +PinSocket_1x32_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x32, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x32 1.27mm single row style1 pin1 left +0 +32 +32 +Connector_PinSocket_1.27mm +PinSocket_1x32_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x32, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x32 1.27mm single row style2 pin1 right +0 +32 +32 +Connector_PinSocket_1.27mm +PinSocket_1x33_P1.27mm_Vertical +Through hole straight socket strip, 1x33, 1.27mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x33 1.27mm single row +0 +33 +33 +Connector_PinSocket_1.27mm +PinSocket_1x33_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x33, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x33 1.27mm single row style1 pin1 left +0 +33 +33 +Connector_PinSocket_1.27mm +PinSocket_1x33_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x33, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x33 1.27mm single row style2 pin1 right +0 +33 +33 +Connector_PinSocket_1.27mm +PinSocket_1x34_P1.27mm_Vertical +Through hole straight socket strip, 1x34, 1.27mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x34 1.27mm single row +0 +34 +34 +Connector_PinSocket_1.27mm +PinSocket_1x34_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x34, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x34 1.27mm single row style1 pin1 left +0 +34 +34 +Connector_PinSocket_1.27mm +PinSocket_1x34_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x34, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x34 1.27mm single row style2 pin1 right +0 +34 +34 +Connector_PinSocket_1.27mm +PinSocket_1x35_P1.27mm_Vertical +Through hole straight socket strip, 1x35, 1.27mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x35 1.27mm single row +0 +35 +35 +Connector_PinSocket_1.27mm +PinSocket_1x35_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x35, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x35 1.27mm single row style1 pin1 left +0 +35 +35 +Connector_PinSocket_1.27mm +PinSocket_1x35_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x35, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x35 1.27mm single row style2 pin1 right +0 +35 +35 +Connector_PinSocket_1.27mm +PinSocket_1x36_P1.27mm_Vertical +Through hole straight socket strip, 1x36, 1.27mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x36 1.27mm single row +0 +36 +36 +Connector_PinSocket_1.27mm +PinSocket_1x36_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x36, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x36 1.27mm single row style1 pin1 left +0 +36 +36 +Connector_PinSocket_1.27mm +PinSocket_1x36_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x36, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x36 1.27mm single row style2 pin1 right +0 +36 +36 +Connector_PinSocket_1.27mm +PinSocket_1x37_P1.27mm_Vertical +Through hole straight socket strip, 1x37, 1.27mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x37 1.27mm single row +0 +37 +37 +Connector_PinSocket_1.27mm +PinSocket_1x37_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x37, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x37 1.27mm single row style1 pin1 left +0 +37 +37 +Connector_PinSocket_1.27mm +PinSocket_1x37_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x37, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x37 1.27mm single row style2 pin1 right +0 +37 +37 +Connector_PinSocket_1.27mm +PinSocket_1x38_P1.27mm_Vertical +Through hole straight socket strip, 1x38, 1.27mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x38 1.27mm single row +0 +38 +38 +Connector_PinSocket_1.27mm +PinSocket_1x38_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x38, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x38 1.27mm single row style1 pin1 left +0 +38 +38 +Connector_PinSocket_1.27mm +PinSocket_1x38_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x38, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x38 1.27mm single row style2 pin1 right +0 +38 +38 +Connector_PinSocket_1.27mm +PinSocket_1x39_P1.27mm_Vertical +Through hole straight socket strip, 1x39, 1.27mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x39 1.27mm single row +0 +39 +39 +Connector_PinSocket_1.27mm +PinSocket_1x39_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x39, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x39 1.27mm single row style1 pin1 left +0 +39 +39 +Connector_PinSocket_1.27mm +PinSocket_1x39_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x39, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x39 1.27mm single row style2 pin1 right +0 +39 +39 +Connector_PinSocket_1.27mm +PinSocket_1x40_P1.27mm_Vertical +Through hole straight socket strip, 1x40, 1.27mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x40 1.27mm single row +0 +40 +40 +Connector_PinSocket_1.27mm +PinSocket_1x40_P1.27mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x40, 1.27mm pitch, single row, style 1 (pin 1 left) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x40 1.27mm single row style1 pin1 left +0 +40 +40 +Connector_PinSocket_1.27mm +PinSocket_1x40_P1.27mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x40, 1.27mm pitch, single row, style 2 (pin 1 right) (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD075.pdf&t=1511594726925), script generated +Surface mounted socket strip SMD 1x40 1.27mm single row style2 pin1 right +0 +40 +40 +Connector_PinSocket_1.27mm +PinSocket_2x01_P1.27mm_Vertical +Through hole straight socket strip, 2x01, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x01 1.27mm double row +0 +2 +2 +Connector_PinSocket_1.27mm +PinSocket_2x01_P1.27mm_Vertical_SMD +surface-mounted straight socket strip, 2x01, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated +Surface mounted socket strip SMD 2x01 1.27mm double row +0 +2 +2 +Connector_PinSocket_1.27mm +PinSocket_2x02_P1.27mm_Vertical +Through hole straight socket strip, 2x02, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x02 1.27mm double row +0 +4 +4 +Connector_PinSocket_1.27mm +PinSocket_2x02_P1.27mm_Vertical_SMD +surface-mounted straight socket strip, 2x02, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated +Surface mounted socket strip SMD 2x02 1.27mm double row +0 +4 +4 +Connector_PinSocket_1.27mm +PinSocket_2x03_P1.27mm_Horizontal +Through hole angled socket strip, 2x03, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x03 1.27mm double row +0 +6 +6 +Connector_PinSocket_1.27mm +PinSocket_2x03_P1.27mm_Vertical +Through hole straight socket strip, 2x03, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x03 1.27mm double row +0 +6 +6 +Connector_PinSocket_1.27mm +PinSocket_2x03_P1.27mm_Vertical_SMD +surface-mounted straight socket strip, 2x03, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated +Surface mounted socket strip SMD 2x03 1.27mm double row +0 +6 +6 +Connector_PinSocket_1.27mm +PinSocket_2x04_P1.27mm_Horizontal +Through hole angled socket strip, 2x04, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x04 1.27mm double row +0 +8 +8 +Connector_PinSocket_1.27mm +PinSocket_2x04_P1.27mm_Vertical +Through hole straight socket strip, 2x04, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x04 1.27mm double row +0 +8 +8 +Connector_PinSocket_1.27mm +PinSocket_2x04_P1.27mm_Vertical_SMD +surface-mounted straight socket strip, 2x04, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated +Surface mounted socket strip SMD 2x04 1.27mm double row +0 +8 +8 +Connector_PinSocket_1.27mm +PinSocket_2x05_P1.27mm_Horizontal +Through hole angled socket strip, 2x05, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x05 1.27mm double row +0 +10 +10 +Connector_PinSocket_1.27mm +PinSocket_2x05_P1.27mm_Vertical +Through hole straight socket strip, 2x05, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x05 1.27mm double row +0 +10 +10 +Connector_PinSocket_1.27mm +PinSocket_2x05_P1.27mm_Vertical_SMD +surface-mounted straight socket strip, 2x05, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated +Surface mounted socket strip SMD 2x05 1.27mm double row +0 +10 +10 +Connector_PinSocket_1.27mm +PinSocket_2x06_P1.27mm_Horizontal +Through hole angled socket strip, 2x06, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x06 1.27mm double row +0 +12 +12 +Connector_PinSocket_1.27mm +PinSocket_2x06_P1.27mm_Vertical +Through hole straight socket strip, 2x06, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x06 1.27mm double row +0 +12 +12 +Connector_PinSocket_1.27mm +PinSocket_2x06_P1.27mm_Vertical_SMD +surface-mounted straight socket strip, 2x06, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated +Surface mounted socket strip SMD 2x06 1.27mm double row +0 +12 +12 +Connector_PinSocket_1.27mm +PinSocket_2x07_P1.27mm_Horizontal +Through hole angled socket strip, 2x07, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x07 1.27mm double row +0 +14 +14 +Connector_PinSocket_1.27mm +PinSocket_2x07_P1.27mm_Vertical +Through hole straight socket strip, 2x07, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x07 1.27mm double row +0 +14 +14 +Connector_PinSocket_1.27mm +PinSocket_2x07_P1.27mm_Vertical_SMD +surface-mounted straight socket strip, 2x07, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated +Surface mounted socket strip SMD 2x07 1.27mm double row +0 +14 +14 +Connector_PinSocket_1.27mm +PinSocket_2x08_P1.27mm_Horizontal +Through hole angled socket strip, 2x08, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x08 1.27mm double row +0 +16 +16 +Connector_PinSocket_1.27mm +PinSocket_2x08_P1.27mm_Vertical +Through hole straight socket strip, 2x08, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x08 1.27mm double row +0 +16 +16 +Connector_PinSocket_1.27mm +PinSocket_2x08_P1.27mm_Vertical_SMD +surface-mounted straight socket strip, 2x08, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated +Surface mounted socket strip SMD 2x08 1.27mm double row +0 +16 +16 +Connector_PinSocket_1.27mm +PinSocket_2x09_P1.27mm_Horizontal +Through hole angled socket strip, 2x09, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x09 1.27mm double row +0 +18 +18 +Connector_PinSocket_1.27mm +PinSocket_2x09_P1.27mm_Vertical +Through hole straight socket strip, 2x09, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x09 1.27mm double row +0 +18 +18 +Connector_PinSocket_1.27mm +PinSocket_2x09_P1.27mm_Vertical_SMD +surface-mounted straight socket strip, 2x09, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated +Surface mounted socket strip SMD 2x09 1.27mm double row +0 +18 +18 +Connector_PinSocket_1.27mm +PinSocket_2x10_P1.27mm_Horizontal +Through hole angled socket strip, 2x10, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x10 1.27mm double row +0 +20 +20 +Connector_PinSocket_1.27mm +PinSocket_2x10_P1.27mm_Vertical +Through hole straight socket strip, 2x10, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x10 1.27mm double row +0 +20 +20 +Connector_PinSocket_1.27mm +PinSocket_2x10_P1.27mm_Vertical_SMD +surface-mounted straight socket strip, 2x10, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated +Surface mounted socket strip SMD 2x10 1.27mm double row +0 +20 +20 +Connector_PinSocket_1.27mm +PinSocket_2x11_P1.27mm_Horizontal +Through hole angled socket strip, 2x11, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x11 1.27mm double row +0 +22 +22 +Connector_PinSocket_1.27mm +PinSocket_2x11_P1.27mm_Vertical +Through hole straight socket strip, 2x11, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x11 1.27mm double row +0 +22 +22 +Connector_PinSocket_1.27mm +PinSocket_2x11_P1.27mm_Vertical_SMD +surface-mounted straight socket strip, 2x11, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated +Surface mounted socket strip SMD 2x11 1.27mm double row +0 +22 +22 +Connector_PinSocket_1.27mm +PinSocket_2x12_P1.27mm_Horizontal +Through hole angled socket strip, 2x12, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x12 1.27mm double row +0 +24 +24 +Connector_PinSocket_1.27mm +PinSocket_2x12_P1.27mm_Vertical +Through hole straight socket strip, 2x12, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x12 1.27mm double row +0 +24 +24 +Connector_PinSocket_1.27mm +PinSocket_2x12_P1.27mm_Vertical_SMD +surface-mounted straight socket strip, 2x12, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated +Surface mounted socket strip SMD 2x12 1.27mm double row +0 +24 +24 +Connector_PinSocket_1.27mm +PinSocket_2x13_P1.27mm_Horizontal +Through hole angled socket strip, 2x13, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x13 1.27mm double row +0 +26 +26 +Connector_PinSocket_1.27mm +PinSocket_2x13_P1.27mm_Vertical +Through hole straight socket strip, 2x13, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x13 1.27mm double row +0 +26 +26 +Connector_PinSocket_1.27mm +PinSocket_2x13_P1.27mm_Vertical_SMD +surface-mounted straight socket strip, 2x13, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated +Surface mounted socket strip SMD 2x13 1.27mm double row +0 +26 +26 +Connector_PinSocket_1.27mm +PinSocket_2x14_P1.27mm_Horizontal +Through hole angled socket strip, 2x14, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x14 1.27mm double row +0 +28 +28 +Connector_PinSocket_1.27mm +PinSocket_2x14_P1.27mm_Vertical +Through hole straight socket strip, 2x14, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x14 1.27mm double row +0 +28 +28 +Connector_PinSocket_1.27mm +PinSocket_2x14_P1.27mm_Vertical_SMD +surface-mounted straight socket strip, 2x14, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated +Surface mounted socket strip SMD 2x14 1.27mm double row +0 +28 +28 +Connector_PinSocket_1.27mm +PinSocket_2x15_P1.27mm_Horizontal +Through hole angled socket strip, 2x15, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x15 1.27mm double row +0 +30 +30 +Connector_PinSocket_1.27mm +PinSocket_2x15_P1.27mm_Vertical +Through hole straight socket strip, 2x15, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x15 1.27mm double row +0 +30 +30 +Connector_PinSocket_1.27mm +PinSocket_2x15_P1.27mm_Vertical_SMD +surface-mounted straight socket strip, 2x15, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated +Surface mounted socket strip SMD 2x15 1.27mm double row +0 +30 +30 +Connector_PinSocket_1.27mm +PinSocket_2x16_P1.27mm_Horizontal +Through hole angled socket strip, 2x16, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x16 1.27mm double row +0 +32 +32 +Connector_PinSocket_1.27mm +PinSocket_2x16_P1.27mm_Vertical +Through hole straight socket strip, 2x16, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x16 1.27mm double row +0 +32 +32 +Connector_PinSocket_1.27mm +PinSocket_2x16_P1.27mm_Vertical_SMD +surface-mounted straight socket strip, 2x16, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated +Surface mounted socket strip SMD 2x16 1.27mm double row +0 +32 +32 +Connector_PinSocket_1.27mm +PinSocket_2x17_P1.27mm_Horizontal +Through hole angled socket strip, 2x17, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x17 1.27mm double row +0 +34 +34 +Connector_PinSocket_1.27mm +PinSocket_2x17_P1.27mm_Vertical +Through hole straight socket strip, 2x17, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x17 1.27mm double row +0 +34 +34 +Connector_PinSocket_1.27mm +PinSocket_2x17_P1.27mm_Vertical_SMD +surface-mounted straight socket strip, 2x17, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated +Surface mounted socket strip SMD 2x17 1.27mm double row +0 +34 +34 +Connector_PinSocket_1.27mm +PinSocket_2x18_P1.27mm_Horizontal +Through hole angled socket strip, 2x18, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x18 1.27mm double row +0 +36 +36 +Connector_PinSocket_1.27mm +PinSocket_2x18_P1.27mm_Vertical +Through hole straight socket strip, 2x18, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x18 1.27mm double row +0 +36 +36 +Connector_PinSocket_1.27mm +PinSocket_2x18_P1.27mm_Vertical_SMD +surface-mounted straight socket strip, 2x18, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated +Surface mounted socket strip SMD 2x18 1.27mm double row +0 +36 +36 +Connector_PinSocket_1.27mm +PinSocket_2x19_P1.27mm_Horizontal +Through hole angled socket strip, 2x19, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x19 1.27mm double row +0 +38 +38 +Connector_PinSocket_1.27mm +PinSocket_2x19_P1.27mm_Vertical +Through hole straight socket strip, 2x19, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x19 1.27mm double row +0 +38 +38 +Connector_PinSocket_1.27mm +PinSocket_2x19_P1.27mm_Vertical_SMD +surface-mounted straight socket strip, 2x19, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated +Surface mounted socket strip SMD 2x19 1.27mm double row +0 +38 +38 +Connector_PinSocket_1.27mm +PinSocket_2x20_P1.27mm_Horizontal +Through hole angled socket strip, 2x20, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x20 1.27mm double row +0 +40 +40 +Connector_PinSocket_1.27mm +PinSocket_2x20_P1.27mm_Vertical +Through hole straight socket strip, 2x20, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x20 1.27mm double row +0 +40 +40 +Connector_PinSocket_1.27mm +PinSocket_2x20_P1.27mm_Vertical_SMD +surface-mounted straight socket strip, 2x20, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated +Surface mounted socket strip SMD 2x20 1.27mm double row +0 +40 +40 +Connector_PinSocket_1.27mm +PinSocket_2x21_P1.27mm_Horizontal +Through hole angled socket strip, 2x21, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x21 1.27mm double row +0 +42 +42 +Connector_PinSocket_1.27mm +PinSocket_2x21_P1.27mm_Vertical +Through hole straight socket strip, 2x21, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x21 1.27mm double row +0 +42 +42 +Connector_PinSocket_1.27mm +PinSocket_2x21_P1.27mm_Vertical_SMD +surface-mounted straight socket strip, 2x21, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated +Surface mounted socket strip SMD 2x21 1.27mm double row +0 +42 +42 +Connector_PinSocket_1.27mm +PinSocket_2x22_P1.27mm_Horizontal +Through hole angled socket strip, 2x22, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x22 1.27mm double row +0 +44 +44 +Connector_PinSocket_1.27mm +PinSocket_2x22_P1.27mm_Vertical +Through hole straight socket strip, 2x22, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x22 1.27mm double row +0 +44 +44 +Connector_PinSocket_1.27mm +PinSocket_2x22_P1.27mm_Vertical_SMD +surface-mounted straight socket strip, 2x22, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated +Surface mounted socket strip SMD 2x22 1.27mm double row +0 +44 +44 +Connector_PinSocket_1.27mm +PinSocket_2x23_P1.27mm_Horizontal +Through hole angled socket strip, 2x23, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x23 1.27mm double row +0 +46 +46 +Connector_PinSocket_1.27mm +PinSocket_2x23_P1.27mm_Vertical +Through hole straight socket strip, 2x23, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x23 1.27mm double row +0 +46 +46 +Connector_PinSocket_1.27mm +PinSocket_2x23_P1.27mm_Vertical_SMD +surface-mounted straight socket strip, 2x23, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated +Surface mounted socket strip SMD 2x23 1.27mm double row +0 +46 +46 +Connector_PinSocket_1.27mm +PinSocket_2x24_P1.27mm_Horizontal +Through hole angled socket strip, 2x24, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x24 1.27mm double row +0 +48 +48 +Connector_PinSocket_1.27mm +PinSocket_2x24_P1.27mm_Vertical +Through hole straight socket strip, 2x24, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x24 1.27mm double row +0 +48 +48 +Connector_PinSocket_1.27mm +PinSocket_2x24_P1.27mm_Vertical_SMD +surface-mounted straight socket strip, 2x24, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated +Surface mounted socket strip SMD 2x24 1.27mm double row +0 +48 +48 +Connector_PinSocket_1.27mm +PinSocket_2x25_P1.27mm_Horizontal +Through hole angled socket strip, 2x25, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x25 1.27mm double row +0 +50 +50 +Connector_PinSocket_1.27mm +PinSocket_2x25_P1.27mm_Vertical +Through hole straight socket strip, 2x25, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x25 1.27mm double row +0 +50 +50 +Connector_PinSocket_1.27mm +PinSocket_2x25_P1.27mm_Vertical_SMD +surface-mounted straight socket strip, 2x25, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated +Surface mounted socket strip SMD 2x25 1.27mm double row +0 +50 +50 +Connector_PinSocket_1.27mm +PinSocket_2x26_P1.27mm_Horizontal +Through hole angled socket strip, 2x26, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x26 1.27mm double row +0 +52 +52 +Connector_PinSocket_1.27mm +PinSocket_2x26_P1.27mm_Vertical +Through hole straight socket strip, 2x26, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x26 1.27mm double row +0 +52 +52 +Connector_PinSocket_1.27mm +PinSocket_2x26_P1.27mm_Vertical_SMD +surface-mounted straight socket strip, 2x26, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated +Surface mounted socket strip SMD 2x26 1.27mm double row +0 +52 +52 +Connector_PinSocket_1.27mm +PinSocket_2x27_P1.27mm_Horizontal +Through hole angled socket strip, 2x27, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x27 1.27mm double row +0 +54 +54 +Connector_PinSocket_1.27mm +PinSocket_2x27_P1.27mm_Vertical +Through hole straight socket strip, 2x27, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x27 1.27mm double row +0 +54 +54 +Connector_PinSocket_1.27mm +PinSocket_2x27_P1.27mm_Vertical_SMD +surface-mounted straight socket strip, 2x27, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated +Surface mounted socket strip SMD 2x27 1.27mm double row +0 +54 +54 +Connector_PinSocket_1.27mm +PinSocket_2x28_P1.27mm_Horizontal +Through hole angled socket strip, 2x28, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x28 1.27mm double row +0 +56 +56 +Connector_PinSocket_1.27mm +PinSocket_2x28_P1.27mm_Vertical +Through hole straight socket strip, 2x28, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x28 1.27mm double row +0 +56 +56 +Connector_PinSocket_1.27mm +PinSocket_2x28_P1.27mm_Vertical_SMD +surface-mounted straight socket strip, 2x28, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated +Surface mounted socket strip SMD 2x28 1.27mm double row +0 +56 +56 +Connector_PinSocket_1.27mm +PinSocket_2x29_P1.27mm_Horizontal +Through hole angled socket strip, 2x29, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x29 1.27mm double row +0 +58 +58 +Connector_PinSocket_1.27mm +PinSocket_2x29_P1.27mm_Vertical +Through hole straight socket strip, 2x29, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x29 1.27mm double row +0 +58 +58 +Connector_PinSocket_1.27mm +PinSocket_2x29_P1.27mm_Vertical_SMD +surface-mounted straight socket strip, 2x29, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated +Surface mounted socket strip SMD 2x29 1.27mm double row +0 +58 +58 +Connector_PinSocket_1.27mm +PinSocket_2x30_P1.27mm_Horizontal +Through hole angled socket strip, 2x30, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x30 1.27mm double row +0 +60 +60 +Connector_PinSocket_1.27mm +PinSocket_2x30_P1.27mm_Vertical +Through hole straight socket strip, 2x30, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x30 1.27mm double row +0 +60 +60 +Connector_PinSocket_1.27mm +PinSocket_2x30_P1.27mm_Vertical_SMD +surface-mounted straight socket strip, 2x30, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated +Surface mounted socket strip SMD 2x30 1.27mm double row +0 +60 +60 +Connector_PinSocket_1.27mm +PinSocket_2x31_P1.27mm_Horizontal +Through hole angled socket strip, 2x31, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x31 1.27mm double row +0 +62 +62 +Connector_PinSocket_1.27mm +PinSocket_2x31_P1.27mm_Vertical +Through hole straight socket strip, 2x31, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x31 1.27mm double row +0 +62 +62 +Connector_PinSocket_1.27mm +PinSocket_2x31_P1.27mm_Vertical_SMD +surface-mounted straight socket strip, 2x31, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated +Surface mounted socket strip SMD 2x31 1.27mm double row +0 +62 +62 +Connector_PinSocket_1.27mm +PinSocket_2x32_P1.27mm_Horizontal +Through hole angled socket strip, 2x32, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x32 1.27mm double row +0 +64 +64 +Connector_PinSocket_1.27mm +PinSocket_2x32_P1.27mm_Vertical +Through hole straight socket strip, 2x32, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x32 1.27mm double row +0 +64 +64 +Connector_PinSocket_1.27mm +PinSocket_2x32_P1.27mm_Vertical_SMD +surface-mounted straight socket strip, 2x32, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated +Surface mounted socket strip SMD 2x32 1.27mm double row +0 +64 +64 +Connector_PinSocket_1.27mm +PinSocket_2x33_P1.27mm_Horizontal +Through hole angled socket strip, 2x33, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x33 1.27mm double row +0 +66 +66 +Connector_PinSocket_1.27mm +PinSocket_2x33_P1.27mm_Vertical +Through hole straight socket strip, 2x33, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x33 1.27mm double row +0 +66 +66 +Connector_PinSocket_1.27mm +PinSocket_2x33_P1.27mm_Vertical_SMD +surface-mounted straight socket strip, 2x33, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated +Surface mounted socket strip SMD 2x33 1.27mm double row +0 +66 +66 +Connector_PinSocket_1.27mm +PinSocket_2x34_P1.27mm_Horizontal +Through hole angled socket strip, 2x34, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x34 1.27mm double row +0 +68 +68 +Connector_PinSocket_1.27mm +PinSocket_2x34_P1.27mm_Vertical +Through hole straight socket strip, 2x34, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x34 1.27mm double row +0 +68 +68 +Connector_PinSocket_1.27mm +PinSocket_2x34_P1.27mm_Vertical_SMD +surface-mounted straight socket strip, 2x34, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated +Surface mounted socket strip SMD 2x34 1.27mm double row +0 +68 +68 +Connector_PinSocket_1.27mm +PinSocket_2x35_P1.27mm_Horizontal +Through hole angled socket strip, 2x35, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x35 1.27mm double row +0 +70 +70 +Connector_PinSocket_1.27mm +PinSocket_2x35_P1.27mm_Vertical +Through hole straight socket strip, 2x35, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x35 1.27mm double row +0 +70 +70 +Connector_PinSocket_1.27mm +PinSocket_2x35_P1.27mm_Vertical_SMD +surface-mounted straight socket strip, 2x35, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated +Surface mounted socket strip SMD 2x35 1.27mm double row +0 +70 +70 +Connector_PinSocket_1.27mm +PinSocket_2x36_P1.27mm_Horizontal +Through hole angled socket strip, 2x36, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x36 1.27mm double row +0 +72 +72 +Connector_PinSocket_1.27mm +PinSocket_2x36_P1.27mm_Vertical +Through hole straight socket strip, 2x36, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x36 1.27mm double row +0 +72 +72 +Connector_PinSocket_1.27mm +PinSocket_2x36_P1.27mm_Vertical_SMD +surface-mounted straight socket strip, 2x36, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated +Surface mounted socket strip SMD 2x36 1.27mm double row +0 +72 +72 +Connector_PinSocket_1.27mm +PinSocket_2x37_P1.27mm_Horizontal +Through hole angled socket strip, 2x37, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x37 1.27mm double row +0 +74 +74 +Connector_PinSocket_1.27mm +PinSocket_2x37_P1.27mm_Vertical +Through hole straight socket strip, 2x37, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x37 1.27mm double row +0 +74 +74 +Connector_PinSocket_1.27mm +PinSocket_2x37_P1.27mm_Vertical_SMD +surface-mounted straight socket strip, 2x37, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated +Surface mounted socket strip SMD 2x37 1.27mm double row +0 +74 +74 +Connector_PinSocket_1.27mm +PinSocket_2x38_P1.27mm_Horizontal +Through hole angled socket strip, 2x38, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x38 1.27mm double row +0 +76 +76 +Connector_PinSocket_1.27mm +PinSocket_2x38_P1.27mm_Vertical +Through hole straight socket strip, 2x38, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x38 1.27mm double row +0 +76 +76 +Connector_PinSocket_1.27mm +PinSocket_2x38_P1.27mm_Vertical_SMD +surface-mounted straight socket strip, 2x38, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated +Surface mounted socket strip SMD 2x38 1.27mm double row +0 +76 +76 +Connector_PinSocket_1.27mm +PinSocket_2x39_P1.27mm_Horizontal +Through hole angled socket strip, 2x39, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x39 1.27mm double row +0 +78 +78 +Connector_PinSocket_1.27mm +PinSocket_2x39_P1.27mm_Vertical +Through hole straight socket strip, 2x39, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x39 1.27mm double row +0 +78 +78 +Connector_PinSocket_1.27mm +PinSocket_2x39_P1.27mm_Vertical_SMD +surface-mounted straight socket strip, 2x39, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated +Surface mounted socket strip SMD 2x39 1.27mm double row +0 +78 +78 +Connector_PinSocket_1.27mm +PinSocket_2x40_P1.27mm_Horizontal +Through hole angled socket strip, 2x40, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x40 1.27mm double row +0 +80 +80 +Connector_PinSocket_1.27mm +PinSocket_2x40_P1.27mm_Vertical +Through hole straight socket strip, 2x40, 1.27mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x40 1.27mm double row +0 +80 +80 +Connector_PinSocket_1.27mm +PinSocket_2x40_P1.27mm_Vertical_SMD +surface-mounted straight socket strip, 2x40, 1.27mm pitch, double cols (from Kicad 4.0.7!), script generated +Surface mounted socket strip SMD 2x40 1.27mm double row +0 +80 +80 +Connector_PinSocket_1.27mm +PinSocket_2x41_P1.27mm_Horizontal +Through hole angled socket strip, 2x41, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x41 1.27mm double row +0 +82 +82 +Connector_PinSocket_1.27mm +PinSocket_2x42_P1.27mm_Horizontal +Through hole angled socket strip, 2x42, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x42 1.27mm double row +0 +84 +84 +Connector_PinSocket_1.27mm +PinSocket_2x43_P1.27mm_Horizontal +Through hole angled socket strip, 2x43, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x43 1.27mm double row +0 +86 +86 +Connector_PinSocket_1.27mm +PinSocket_2x44_P1.27mm_Horizontal +Through hole angled socket strip, 2x44, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x44 1.27mm double row +0 +88 +88 +Connector_PinSocket_1.27mm +PinSocket_2x45_P1.27mm_Horizontal +Through hole angled socket strip, 2x45, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x45 1.27mm double row +0 +90 +90 +Connector_PinSocket_1.27mm +PinSocket_2x46_P1.27mm_Horizontal +Through hole angled socket strip, 2x46, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x46 1.27mm double row +0 +92 +92 +Connector_PinSocket_1.27mm +PinSocket_2x47_P1.27mm_Horizontal +Through hole angled socket strip, 2x47, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x47 1.27mm double row +0 +94 +94 +Connector_PinSocket_1.27mm +PinSocket_2x48_P1.27mm_Horizontal +Through hole angled socket strip, 2x48, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x48 1.27mm double row +0 +96 +96 +Connector_PinSocket_1.27mm +PinSocket_2x49_P1.27mm_Horizontal +Through hole angled socket strip, 2x49, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x49 1.27mm double row +0 +98 +98 +Connector_PinSocket_1.27mm +PinSocket_2x50_P1.27mm_Horizontal +Through hole angled socket strip, 2x50, 1.27mm pitch, 4.4mm socket length, double cols (https://gct.co/pdfjs/web/viewer.html?file=/Files/Drawings/BD091.pdf&t=1511594177220), script generated +Through hole angled socket strip THT 2x50 1.27mm double row +0 +100 +100 +Connector_PinSocket_2.00mm +PinSocket_1x01_P2.00mm_Horizontal +Through hole angled socket strip, 1x01, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x01 2.00mm single row +0 +1 +1 +Connector_PinSocket_2.00mm +PinSocket_1x01_P2.00mm_Vertical +Through hole straight socket strip, 1x01, 2.00mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x01 2.00mm single row +0 +1 +1 +Connector_PinSocket_2.00mm +PinSocket_1x02_P2.00mm_Horizontal +Through hole angled socket strip, 1x02, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x02 2.00mm single row +0 +2 +2 +Connector_PinSocket_2.00mm +PinSocket_1x02_P2.00mm_Vertical +Through hole straight socket strip, 1x02, 2.00mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x02 2.00mm single row +0 +2 +2 +Connector_PinSocket_2.00mm +PinSocket_1x02_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x02, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x02 2.00mm single row style1 pin1 left +0 +2 +2 +Connector_PinSocket_2.00mm +PinSocket_1x02_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x02, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x02 2.00mm single row style2 pin1 right +0 +2 +2 +Connector_PinSocket_2.00mm +PinSocket_1x03_P2.00mm_Horizontal +Through hole angled socket strip, 1x03, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x03 2.00mm single row +0 +3 +3 +Connector_PinSocket_2.00mm +PinSocket_1x03_P2.00mm_Vertical +Through hole straight socket strip, 1x03, 2.00mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x03 2.00mm single row +0 +3 +3 +Connector_PinSocket_2.00mm +PinSocket_1x03_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x03, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x03 2.00mm single row style1 pin1 left +0 +3 +3 +Connector_PinSocket_2.00mm +PinSocket_1x03_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x03, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x03 2.00mm single row style2 pin1 right +0 +3 +3 +Connector_PinSocket_2.00mm +PinSocket_1x04_P2.00mm_Horizontal +Through hole angled socket strip, 1x04, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x04 2.00mm single row +0 +4 +4 +Connector_PinSocket_2.00mm +PinSocket_1x04_P2.00mm_Vertical +Through hole straight socket strip, 1x04, 2.00mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x04 2.00mm single row +0 +4 +4 +Connector_PinSocket_2.00mm +PinSocket_1x04_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x04, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x04 2.00mm single row style1 pin1 left +0 +4 +4 +Connector_PinSocket_2.00mm +PinSocket_1x04_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x04, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x04 2.00mm single row style2 pin1 right +0 +4 +4 +Connector_PinSocket_2.00mm +PinSocket_1x05_P2.00mm_Horizontal +Through hole angled socket strip, 1x05, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x05 2.00mm single row +0 +5 +5 +Connector_PinSocket_2.00mm +PinSocket_1x05_P2.00mm_Vertical +Through hole straight socket strip, 1x05, 2.00mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x05 2.00mm single row +0 +5 +5 +Connector_PinSocket_2.00mm +PinSocket_1x05_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x05, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x05 2.00mm single row style1 pin1 left +0 +5 +5 +Connector_PinSocket_2.00mm +PinSocket_1x05_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x05, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x05 2.00mm single row style2 pin1 right +0 +5 +5 +Connector_PinSocket_2.00mm +PinSocket_1x06_P2.00mm_Horizontal +Through hole angled socket strip, 1x06, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x06 2.00mm single row +0 +6 +6 +Connector_PinSocket_2.00mm +PinSocket_1x06_P2.00mm_Vertical +Through hole straight socket strip, 1x06, 2.00mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x06 2.00mm single row +0 +6 +6 +Connector_PinSocket_2.00mm +PinSocket_1x06_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x06, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x06 2.00mm single row style1 pin1 left +0 +6 +6 +Connector_PinSocket_2.00mm +PinSocket_1x06_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x06, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x06 2.00mm single row style2 pin1 right +0 +6 +6 +Connector_PinSocket_2.00mm +PinSocket_1x07_P2.00mm_Horizontal +Through hole angled socket strip, 1x07, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x07 2.00mm single row +0 +7 +7 +Connector_PinSocket_2.00mm +PinSocket_1x07_P2.00mm_Vertical +Through hole straight socket strip, 1x07, 2.00mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x07 2.00mm single row +0 +7 +7 +Connector_PinSocket_2.00mm +PinSocket_1x07_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x07, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x07 2.00mm single row style1 pin1 left +0 +7 +7 +Connector_PinSocket_2.00mm +PinSocket_1x07_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x07, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x07 2.00mm single row style2 pin1 right +0 +7 +7 +Connector_PinSocket_2.00mm +PinSocket_1x08_P2.00mm_Horizontal +Through hole angled socket strip, 1x08, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x08 2.00mm single row +0 +8 +8 +Connector_PinSocket_2.00mm +PinSocket_1x08_P2.00mm_Vertical +Through hole straight socket strip, 1x08, 2.00mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x08 2.00mm single row +0 +8 +8 +Connector_PinSocket_2.00mm +PinSocket_1x08_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x08, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x08 2.00mm single row style1 pin1 left +0 +8 +8 +Connector_PinSocket_2.00mm +PinSocket_1x08_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x08, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x08 2.00mm single row style2 pin1 right +0 +8 +8 +Connector_PinSocket_2.00mm +PinSocket_1x09_P2.00mm_Horizontal +Through hole angled socket strip, 1x09, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x09 2.00mm single row +0 +9 +9 +Connector_PinSocket_2.00mm +PinSocket_1x09_P2.00mm_Vertical +Through hole straight socket strip, 1x09, 2.00mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x09 2.00mm single row +0 +9 +9 +Connector_PinSocket_2.00mm +PinSocket_1x09_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x09, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x09 2.00mm single row style1 pin1 left +0 +9 +9 +Connector_PinSocket_2.00mm +PinSocket_1x09_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x09, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x09 2.00mm single row style2 pin1 right +0 +9 +9 +Connector_PinSocket_2.00mm +PinSocket_1x10_P2.00mm_Horizontal +Through hole angled socket strip, 1x10, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x10 2.00mm single row +0 +10 +10 +Connector_PinSocket_2.00mm +PinSocket_1x10_P2.00mm_Vertical +Through hole straight socket strip, 1x10, 2.00mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x10 2.00mm single row +0 +10 +10 +Connector_PinSocket_2.00mm +PinSocket_1x10_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x10, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x10 2.00mm single row style1 pin1 left +0 +10 +10 +Connector_PinSocket_2.00mm +PinSocket_1x10_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x10, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x10 2.00mm single row style2 pin1 right +0 +10 +10 +Connector_PinSocket_2.00mm +PinSocket_1x11_P2.00mm_Horizontal +Through hole angled socket strip, 1x11, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x11 2.00mm single row +0 +11 +11 +Connector_PinSocket_2.00mm +PinSocket_1x11_P2.00mm_Vertical +Through hole straight socket strip, 1x11, 2.00mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x11 2.00mm single row +0 +11 +11 +Connector_PinSocket_2.00mm +PinSocket_1x11_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x11, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x11 2.00mm single row style1 pin1 left +0 +11 +11 +Connector_PinSocket_2.00mm +PinSocket_1x11_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x11, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x11 2.00mm single row style2 pin1 right +0 +11 +11 +Connector_PinSocket_2.00mm +PinSocket_1x12_P2.00mm_Horizontal +Through hole angled socket strip, 1x12, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x12 2.00mm single row +0 +12 +12 +Connector_PinSocket_2.00mm +PinSocket_1x12_P2.00mm_Vertical +Through hole straight socket strip, 1x12, 2.00mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x12 2.00mm single row +0 +12 +12 +Connector_PinSocket_2.00mm +PinSocket_1x12_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x12, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x12 2.00mm single row style1 pin1 left +0 +12 +12 +Connector_PinSocket_2.00mm +PinSocket_1x12_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x12, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x12 2.00mm single row style2 pin1 right +0 +12 +12 +Connector_PinSocket_2.00mm +PinSocket_1x13_P2.00mm_Horizontal +Through hole angled socket strip, 1x13, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x13 2.00mm single row +0 +13 +13 +Connector_PinSocket_2.00mm +PinSocket_1x13_P2.00mm_Vertical +Through hole straight socket strip, 1x13, 2.00mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x13 2.00mm single row +0 +13 +13 +Connector_PinSocket_2.00mm +PinSocket_1x13_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x13, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x13 2.00mm single row style1 pin1 left +0 +13 +13 +Connector_PinSocket_2.00mm +PinSocket_1x13_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x13, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x13 2.00mm single row style2 pin1 right +0 +13 +13 +Connector_PinSocket_2.00mm +PinSocket_1x14_P2.00mm_Horizontal +Through hole angled socket strip, 1x14, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x14 2.00mm single row +0 +14 +14 +Connector_PinSocket_2.00mm +PinSocket_1x14_P2.00mm_Vertical +Through hole straight socket strip, 1x14, 2.00mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x14 2.00mm single row +0 +14 +14 +Connector_PinSocket_2.00mm +PinSocket_1x14_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x14, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x14 2.00mm single row style1 pin1 left +0 +14 +14 +Connector_PinSocket_2.00mm +PinSocket_1x14_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x14, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x14 2.00mm single row style2 pin1 right +0 +14 +14 +Connector_PinSocket_2.00mm +PinSocket_1x15_P2.00mm_Horizontal +Through hole angled socket strip, 1x15, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x15 2.00mm single row +0 +15 +15 +Connector_PinSocket_2.00mm +PinSocket_1x15_P2.00mm_Vertical +Through hole straight socket strip, 1x15, 2.00mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x15 2.00mm single row +0 +15 +15 +Connector_PinSocket_2.00mm +PinSocket_1x15_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x15, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x15 2.00mm single row style1 pin1 left +0 +15 +15 +Connector_PinSocket_2.00mm +PinSocket_1x15_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x15, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x15 2.00mm single row style2 pin1 right +0 +15 +15 +Connector_PinSocket_2.00mm +PinSocket_1x16_P2.00mm_Horizontal +Through hole angled socket strip, 1x16, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x16 2.00mm single row +0 +16 +16 +Connector_PinSocket_2.00mm +PinSocket_1x16_P2.00mm_Vertical +Through hole straight socket strip, 1x16, 2.00mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x16 2.00mm single row +0 +16 +16 +Connector_PinSocket_2.00mm +PinSocket_1x16_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x16, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x16 2.00mm single row style1 pin1 left +0 +16 +16 +Connector_PinSocket_2.00mm +PinSocket_1x16_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x16, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x16 2.00mm single row style2 pin1 right +0 +16 +16 +Connector_PinSocket_2.00mm +PinSocket_1x17_P2.00mm_Horizontal +Through hole angled socket strip, 1x17, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x17 2.00mm single row +0 +17 +17 +Connector_PinSocket_2.00mm +PinSocket_1x17_P2.00mm_Vertical +Through hole straight socket strip, 1x17, 2.00mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x17 2.00mm single row +0 +17 +17 +Connector_PinSocket_2.00mm +PinSocket_1x17_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x17, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x17 2.00mm single row style1 pin1 left +0 +17 +17 +Connector_PinSocket_2.00mm +PinSocket_1x17_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x17, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x17 2.00mm single row style2 pin1 right +0 +17 +17 +Connector_PinSocket_2.00mm +PinSocket_1x18_P2.00mm_Horizontal +Through hole angled socket strip, 1x18, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x18 2.00mm single row +0 +18 +18 +Connector_PinSocket_2.00mm +PinSocket_1x18_P2.00mm_Vertical +Through hole straight socket strip, 1x18, 2.00mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x18 2.00mm single row +0 +18 +18 +Connector_PinSocket_2.00mm +PinSocket_1x18_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x18, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x18 2.00mm single row style1 pin1 left +0 +18 +18 +Connector_PinSocket_2.00mm +PinSocket_1x18_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x18, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x18 2.00mm single row style2 pin1 right +0 +18 +18 +Connector_PinSocket_2.00mm +PinSocket_1x19_P2.00mm_Horizontal +Through hole angled socket strip, 1x19, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x19 2.00mm single row +0 +19 +19 +Connector_PinSocket_2.00mm +PinSocket_1x19_P2.00mm_Vertical +Through hole straight socket strip, 1x19, 2.00mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x19 2.00mm single row +0 +19 +19 +Connector_PinSocket_2.00mm +PinSocket_1x19_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x19, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x19 2.00mm single row style1 pin1 left +0 +19 +19 +Connector_PinSocket_2.00mm +PinSocket_1x19_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x19, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x19 2.00mm single row style2 pin1 right +0 +19 +19 +Connector_PinSocket_2.00mm +PinSocket_1x20_P2.00mm_Horizontal +Through hole angled socket strip, 1x20, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x20 2.00mm single row +0 +20 +20 +Connector_PinSocket_2.00mm +PinSocket_1x20_P2.00mm_Vertical +Through hole straight socket strip, 1x20, 2.00mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x20 2.00mm single row +0 +20 +20 +Connector_PinSocket_2.00mm +PinSocket_1x20_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x20, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x20 2.00mm single row style1 pin1 left +0 +20 +20 +Connector_PinSocket_2.00mm +PinSocket_1x20_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x20, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x20 2.00mm single row style2 pin1 right +0 +20 +20 +Connector_PinSocket_2.00mm +PinSocket_1x21_P2.00mm_Horizontal +Through hole angled socket strip, 1x21, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x21 2.00mm single row +0 +21 +21 +Connector_PinSocket_2.00mm +PinSocket_1x21_P2.00mm_Vertical +Through hole straight socket strip, 1x21, 2.00mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x21 2.00mm single row +0 +21 +21 +Connector_PinSocket_2.00mm +PinSocket_1x21_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x21, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x21 2.00mm single row style1 pin1 left +0 +21 +21 +Connector_PinSocket_2.00mm +PinSocket_1x21_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x21, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x21 2.00mm single row style2 pin1 right +0 +21 +21 +Connector_PinSocket_2.00mm +PinSocket_1x22_P2.00mm_Horizontal +Through hole angled socket strip, 1x22, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x22 2.00mm single row +0 +22 +22 +Connector_PinSocket_2.00mm +PinSocket_1x22_P2.00mm_Vertical +Through hole straight socket strip, 1x22, 2.00mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x22 2.00mm single row +0 +22 +22 +Connector_PinSocket_2.00mm +PinSocket_1x22_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x22, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x22 2.00mm single row style1 pin1 left +0 +22 +22 +Connector_PinSocket_2.00mm +PinSocket_1x22_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x22, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x22 2.00mm single row style2 pin1 right +0 +22 +22 +Connector_PinSocket_2.00mm +PinSocket_1x23_P2.00mm_Horizontal +Through hole angled socket strip, 1x23, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x23 2.00mm single row +0 +23 +23 +Connector_PinSocket_2.00mm +PinSocket_1x23_P2.00mm_Vertical +Through hole straight socket strip, 1x23, 2.00mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x23 2.00mm single row +0 +23 +23 +Connector_PinSocket_2.00mm +PinSocket_1x23_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x23, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x23 2.00mm single row style1 pin1 left +0 +23 +23 +Connector_PinSocket_2.00mm +PinSocket_1x23_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x23, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x23 2.00mm single row style2 pin1 right +0 +23 +23 +Connector_PinSocket_2.00mm +PinSocket_1x24_P2.00mm_Horizontal +Through hole angled socket strip, 1x24, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x24 2.00mm single row +0 +24 +24 +Connector_PinSocket_2.00mm +PinSocket_1x24_P2.00mm_Vertical +Through hole straight socket strip, 1x24, 2.00mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x24 2.00mm single row +0 +24 +24 +Connector_PinSocket_2.00mm +PinSocket_1x24_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x24, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x24 2.00mm single row style1 pin1 left +0 +24 +24 +Connector_PinSocket_2.00mm +PinSocket_1x24_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x24, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x24 2.00mm single row style2 pin1 right +0 +24 +24 +Connector_PinSocket_2.00mm +PinSocket_1x25_P2.00mm_Horizontal +Through hole angled socket strip, 1x25, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x25 2.00mm single row +0 +25 +25 +Connector_PinSocket_2.00mm +PinSocket_1x25_P2.00mm_Vertical +Through hole straight socket strip, 1x25, 2.00mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x25 2.00mm single row +0 +25 +25 +Connector_PinSocket_2.00mm +PinSocket_1x25_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x25, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x25 2.00mm single row style1 pin1 left +0 +25 +25 +Connector_PinSocket_2.00mm +PinSocket_1x25_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x25, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x25 2.00mm single row style2 pin1 right +0 +25 +25 +Connector_PinSocket_2.00mm +PinSocket_1x26_P2.00mm_Horizontal +Through hole angled socket strip, 1x26, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x26 2.00mm single row +0 +26 +26 +Connector_PinSocket_2.00mm +PinSocket_1x26_P2.00mm_Vertical +Through hole straight socket strip, 1x26, 2.00mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x26 2.00mm single row +0 +26 +26 +Connector_PinSocket_2.00mm +PinSocket_1x26_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x26, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x26 2.00mm single row style1 pin1 left +0 +26 +26 +Connector_PinSocket_2.00mm +PinSocket_1x26_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x26, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x26 2.00mm single row style2 pin1 right +0 +26 +26 +Connector_PinSocket_2.00mm +PinSocket_1x27_P2.00mm_Horizontal +Through hole angled socket strip, 1x27, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x27 2.00mm single row +0 +27 +27 +Connector_PinSocket_2.00mm +PinSocket_1x27_P2.00mm_Vertical +Through hole straight socket strip, 1x27, 2.00mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x27 2.00mm single row +0 +27 +27 +Connector_PinSocket_2.00mm +PinSocket_1x27_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x27, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x27 2.00mm single row style1 pin1 left +0 +27 +27 +Connector_PinSocket_2.00mm +PinSocket_1x27_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x27, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x27 2.00mm single row style2 pin1 right +0 +27 +27 +Connector_PinSocket_2.00mm +PinSocket_1x28_P2.00mm_Horizontal +Through hole angled socket strip, 1x28, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x28 2.00mm single row +0 +28 +28 +Connector_PinSocket_2.00mm +PinSocket_1x28_P2.00mm_Vertical +Through hole straight socket strip, 1x28, 2.00mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x28 2.00mm single row +0 +28 +28 +Connector_PinSocket_2.00mm +PinSocket_1x28_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x28, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x28 2.00mm single row style1 pin1 left +0 +28 +28 +Connector_PinSocket_2.00mm +PinSocket_1x28_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x28, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x28 2.00mm single row style2 pin1 right +0 +28 +28 +Connector_PinSocket_2.00mm +PinSocket_1x29_P2.00mm_Horizontal +Through hole angled socket strip, 1x29, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x29 2.00mm single row +0 +29 +29 +Connector_PinSocket_2.00mm +PinSocket_1x29_P2.00mm_Vertical +Through hole straight socket strip, 1x29, 2.00mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x29 2.00mm single row +0 +29 +29 +Connector_PinSocket_2.00mm +PinSocket_1x29_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x29, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x29 2.00mm single row style1 pin1 left +0 +29 +29 +Connector_PinSocket_2.00mm +PinSocket_1x29_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x29, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x29 2.00mm single row style2 pin1 right +0 +29 +29 +Connector_PinSocket_2.00mm +PinSocket_1x30_P2.00mm_Horizontal +Through hole angled socket strip, 1x30, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x30 2.00mm single row +0 +30 +30 +Connector_PinSocket_2.00mm +PinSocket_1x30_P2.00mm_Vertical +Through hole straight socket strip, 1x30, 2.00mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x30 2.00mm single row +0 +30 +30 +Connector_PinSocket_2.00mm +PinSocket_1x30_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x30, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x30 2.00mm single row style1 pin1 left +0 +30 +30 +Connector_PinSocket_2.00mm +PinSocket_1x30_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x30, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x30 2.00mm single row style2 pin1 right +0 +30 +30 +Connector_PinSocket_2.00mm +PinSocket_1x31_P2.00mm_Horizontal +Through hole angled socket strip, 1x31, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x31 2.00mm single row +0 +31 +31 +Connector_PinSocket_2.00mm +PinSocket_1x31_P2.00mm_Vertical +Through hole straight socket strip, 1x31, 2.00mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x31 2.00mm single row +0 +31 +31 +Connector_PinSocket_2.00mm +PinSocket_1x31_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x31, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x31 2.00mm single row style1 pin1 left +0 +31 +31 +Connector_PinSocket_2.00mm +PinSocket_1x31_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x31, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x31 2.00mm single row style2 pin1 right +0 +31 +31 +Connector_PinSocket_2.00mm +PinSocket_1x32_P2.00mm_Horizontal +Through hole angled socket strip, 1x32, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x32 2.00mm single row +0 +32 +32 +Connector_PinSocket_2.00mm +PinSocket_1x32_P2.00mm_Vertical +Through hole straight socket strip, 1x32, 2.00mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x32 2.00mm single row +0 +32 +32 +Connector_PinSocket_2.00mm +PinSocket_1x32_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x32, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x32 2.00mm single row style1 pin1 left +0 +32 +32 +Connector_PinSocket_2.00mm +PinSocket_1x32_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x32, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x32 2.00mm single row style2 pin1 right +0 +32 +32 +Connector_PinSocket_2.00mm +PinSocket_1x33_P2.00mm_Horizontal +Through hole angled socket strip, 1x33, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x33 2.00mm single row +0 +33 +33 +Connector_PinSocket_2.00mm +PinSocket_1x33_P2.00mm_Vertical +Through hole straight socket strip, 1x33, 2.00mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x33 2.00mm single row +0 +33 +33 +Connector_PinSocket_2.00mm +PinSocket_1x33_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x33, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x33 2.00mm single row style1 pin1 left +0 +33 +33 +Connector_PinSocket_2.00mm +PinSocket_1x33_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x33, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x33 2.00mm single row style2 pin1 right +0 +33 +33 +Connector_PinSocket_2.00mm +PinSocket_1x34_P2.00mm_Horizontal +Through hole angled socket strip, 1x34, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x34 2.00mm single row +0 +34 +34 +Connector_PinSocket_2.00mm +PinSocket_1x34_P2.00mm_Vertical +Through hole straight socket strip, 1x34, 2.00mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x34 2.00mm single row +0 +34 +34 +Connector_PinSocket_2.00mm +PinSocket_1x34_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x34, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x34 2.00mm single row style1 pin1 left +0 +34 +34 +Connector_PinSocket_2.00mm +PinSocket_1x34_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x34, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x34 2.00mm single row style2 pin1 right +0 +34 +34 +Connector_PinSocket_2.00mm +PinSocket_1x35_P2.00mm_Horizontal +Through hole angled socket strip, 1x35, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x35 2.00mm single row +0 +35 +35 +Connector_PinSocket_2.00mm +PinSocket_1x35_P2.00mm_Vertical +Through hole straight socket strip, 1x35, 2.00mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x35 2.00mm single row +0 +35 +35 +Connector_PinSocket_2.00mm +PinSocket_1x35_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x35, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x35 2.00mm single row style1 pin1 left +0 +35 +35 +Connector_PinSocket_2.00mm +PinSocket_1x35_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x35, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x35 2.00mm single row style2 pin1 right +0 +35 +35 +Connector_PinSocket_2.00mm +PinSocket_1x36_P2.00mm_Horizontal +Through hole angled socket strip, 1x36, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x36 2.00mm single row +0 +36 +36 +Connector_PinSocket_2.00mm +PinSocket_1x36_P2.00mm_Vertical +Through hole straight socket strip, 1x36, 2.00mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x36 2.00mm single row +0 +36 +36 +Connector_PinSocket_2.00mm +PinSocket_1x36_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x36, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x36 2.00mm single row style1 pin1 left +0 +36 +36 +Connector_PinSocket_2.00mm +PinSocket_1x36_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x36, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x36 2.00mm single row style2 pin1 right +0 +36 +36 +Connector_PinSocket_2.00mm +PinSocket_1x37_P2.00mm_Horizontal +Through hole angled socket strip, 1x37, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x37 2.00mm single row +0 +37 +37 +Connector_PinSocket_2.00mm +PinSocket_1x37_P2.00mm_Vertical +Through hole straight socket strip, 1x37, 2.00mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x37 2.00mm single row +0 +37 +37 +Connector_PinSocket_2.00mm +PinSocket_1x37_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x37, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x37 2.00mm single row style1 pin1 left +0 +37 +37 +Connector_PinSocket_2.00mm +PinSocket_1x37_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x37, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x37 2.00mm single row style2 pin1 right +0 +37 +37 +Connector_PinSocket_2.00mm +PinSocket_1x38_P2.00mm_Horizontal +Through hole angled socket strip, 1x38, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x38 2.00mm single row +0 +38 +38 +Connector_PinSocket_2.00mm +PinSocket_1x38_P2.00mm_Vertical +Through hole straight socket strip, 1x38, 2.00mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x38 2.00mm single row +0 +38 +38 +Connector_PinSocket_2.00mm +PinSocket_1x38_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x38, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x38 2.00mm single row style1 pin1 left +0 +38 +38 +Connector_PinSocket_2.00mm +PinSocket_1x38_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x38, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x38 2.00mm single row style2 pin1 right +0 +38 +38 +Connector_PinSocket_2.00mm +PinSocket_1x39_P2.00mm_Horizontal +Through hole angled socket strip, 1x39, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x39 2.00mm single row +0 +39 +39 +Connector_PinSocket_2.00mm +PinSocket_1x39_P2.00mm_Vertical +Through hole straight socket strip, 1x39, 2.00mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x39 2.00mm single row +0 +39 +39 +Connector_PinSocket_2.00mm +PinSocket_1x39_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x39, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x39 2.00mm single row style1 pin1 left +0 +39 +39 +Connector_PinSocket_2.00mm +PinSocket_1x39_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x39, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x39 2.00mm single row style2 pin1 right +0 +39 +39 +Connector_PinSocket_2.00mm +PinSocket_1x40_P2.00mm_Horizontal +Through hole angled socket strip, 1x40, 2.00mm pitch, 6.35mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x40 2.00mm single row +0 +40 +40 +Connector_PinSocket_2.00mm +PinSocket_1x40_P2.00mm_Vertical +Through hole straight socket strip, 1x40, 2.00mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x40 2.00mm single row +0 +40 +40 +Connector_PinSocket_2.00mm +PinSocket_1x40_P2.00mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x40, 2.00mm pitch, single row, style 1 (pin 1 left) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x40 2.00mm single row style1 pin1 left +0 +40 +40 +Connector_PinSocket_2.00mm +PinSocket_1x40_P2.00mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x40, 2.00mm pitch, single row, style 2 (pin 1 right) (https://www.jayconsystems.com/fileuploader/download/download/?d=1&file=custom%2Fupload%2FFile-1375728122.pdf), script generated +Surface mounted socket strip SMD 1x40 2.00mm single row style2 pin1 right +0 +40 +40 +Connector_PinSocket_2.00mm +PinSocket_2x01_P2.00mm_Horizontal +Through hole angled socket strip, 2x01, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x01 2.00mm double row +0 +2 +2 +Connector_PinSocket_2.00mm +PinSocket_2x01_P2.00mm_Vertical +Through hole straight socket strip, 2x01, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x01 2.00mm double row +0 +2 +2 +Connector_PinSocket_2.00mm +PinSocket_2x01_P2.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x01, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x01 2.00mm double row +0 +2 +2 +Connector_PinSocket_2.00mm +PinSocket_2x02_P2.00mm_Horizontal +Through hole angled socket strip, 2x02, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x02 2.00mm double row +0 +4 +4 +Connector_PinSocket_2.00mm +PinSocket_2x02_P2.00mm_Vertical +Through hole straight socket strip, 2x02, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x02 2.00mm double row +0 +4 +4 +Connector_PinSocket_2.00mm +PinSocket_2x02_P2.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x02, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x02 2.00mm double row +0 +4 +4 +Connector_PinSocket_2.00mm +PinSocket_2x03_P2.00mm_Horizontal +Through hole angled socket strip, 2x03, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x03 2.00mm double row +0 +6 +6 +Connector_PinSocket_2.00mm +PinSocket_2x03_P2.00mm_Vertical +Through hole straight socket strip, 2x03, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x03 2.00mm double row +0 +6 +6 +Connector_PinSocket_2.00mm +PinSocket_2x03_P2.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x03, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x03 2.00mm double row +0 +6 +6 +Connector_PinSocket_2.00mm +PinSocket_2x04_P2.00mm_Horizontal +Through hole angled socket strip, 2x04, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x04 2.00mm double row +0 +8 +8 +Connector_PinSocket_2.00mm +PinSocket_2x04_P2.00mm_Vertical +Through hole straight socket strip, 2x04, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x04 2.00mm double row +0 +8 +8 +Connector_PinSocket_2.00mm +PinSocket_2x04_P2.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x04, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x04 2.00mm double row +0 +8 +8 +Connector_PinSocket_2.00mm +PinSocket_2x05_P2.00mm_Horizontal +Through hole angled socket strip, 2x05, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x05 2.00mm double row +0 +10 +10 +Connector_PinSocket_2.00mm +PinSocket_2x05_P2.00mm_Vertical +Through hole straight socket strip, 2x05, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x05 2.00mm double row +0 +10 +10 +Connector_PinSocket_2.00mm +PinSocket_2x05_P2.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x05, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x05 2.00mm double row +0 +10 +10 +Connector_PinSocket_2.00mm +PinSocket_2x06_P2.00mm_Horizontal +Through hole angled socket strip, 2x06, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x06 2.00mm double row +0 +12 +12 +Connector_PinSocket_2.00mm +PinSocket_2x06_P2.00mm_Vertical +Through hole straight socket strip, 2x06, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x06 2.00mm double row +0 +12 +12 +Connector_PinSocket_2.00mm +PinSocket_2x06_P2.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x06, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x06 2.00mm double row +0 +12 +12 +Connector_PinSocket_2.00mm +PinSocket_2x07_P2.00mm_Horizontal +Through hole angled socket strip, 2x07, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x07 2.00mm double row +0 +14 +14 +Connector_PinSocket_2.00mm +PinSocket_2x07_P2.00mm_Vertical +Through hole straight socket strip, 2x07, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x07 2.00mm double row +0 +14 +14 +Connector_PinSocket_2.00mm +PinSocket_2x07_P2.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x07, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x07 2.00mm double row +0 +14 +14 +Connector_PinSocket_2.00mm +PinSocket_2x08_P2.00mm_Horizontal +Through hole angled socket strip, 2x08, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x08 2.00mm double row +0 +16 +16 +Connector_PinSocket_2.00mm +PinSocket_2x08_P2.00mm_Vertical +Through hole straight socket strip, 2x08, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x08 2.00mm double row +0 +16 +16 +Connector_PinSocket_2.00mm +PinSocket_2x08_P2.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x08, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x08 2.00mm double row +0 +16 +16 +Connector_PinSocket_2.00mm +PinSocket_2x09_P2.00mm_Horizontal +Through hole angled socket strip, 2x09, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x09 2.00mm double row +0 +18 +18 +Connector_PinSocket_2.00mm +PinSocket_2x09_P2.00mm_Vertical +Through hole straight socket strip, 2x09, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x09 2.00mm double row +0 +18 +18 +Connector_PinSocket_2.00mm +PinSocket_2x09_P2.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x09, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x09 2.00mm double row +0 +18 +18 +Connector_PinSocket_2.00mm +PinSocket_2x10_P2.00mm_Horizontal +Through hole angled socket strip, 2x10, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x10 2.00mm double row +0 +20 +20 +Connector_PinSocket_2.00mm +PinSocket_2x10_P2.00mm_Vertical +Through hole straight socket strip, 2x10, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x10 2.00mm double row +0 +20 +20 +Connector_PinSocket_2.00mm +PinSocket_2x10_P2.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x10, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x10 2.00mm double row +0 +20 +20 +Connector_PinSocket_2.00mm +PinSocket_2x11_P2.00mm_Horizontal +Through hole angled socket strip, 2x11, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x11 2.00mm double row +0 +22 +22 +Connector_PinSocket_2.00mm +PinSocket_2x11_P2.00mm_Vertical +Through hole straight socket strip, 2x11, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x11 2.00mm double row +0 +22 +22 +Connector_PinSocket_2.00mm +PinSocket_2x11_P2.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x11, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x11 2.00mm double row +0 +22 +22 +Connector_PinSocket_2.00mm +PinSocket_2x12_P2.00mm_Horizontal +Through hole angled socket strip, 2x12, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x12 2.00mm double row +0 +24 +24 +Connector_PinSocket_2.00mm +PinSocket_2x12_P2.00mm_Vertical +Through hole straight socket strip, 2x12, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x12 2.00mm double row +0 +24 +24 +Connector_PinSocket_2.00mm +PinSocket_2x12_P2.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x12, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x12 2.00mm double row +0 +24 +24 +Connector_PinSocket_2.00mm +PinSocket_2x13_P2.00mm_Horizontal +Through hole angled socket strip, 2x13, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x13 2.00mm double row +0 +26 +26 +Connector_PinSocket_2.00mm +PinSocket_2x13_P2.00mm_Vertical +Through hole straight socket strip, 2x13, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x13 2.00mm double row +0 +26 +26 +Connector_PinSocket_2.00mm +PinSocket_2x13_P2.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x13, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x13 2.00mm double row +0 +26 +26 +Connector_PinSocket_2.00mm +PinSocket_2x14_P2.00mm_Horizontal +Through hole angled socket strip, 2x14, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x14 2.00mm double row +0 +28 +28 +Connector_PinSocket_2.00mm +PinSocket_2x14_P2.00mm_Vertical +Through hole straight socket strip, 2x14, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x14 2.00mm double row +0 +28 +28 +Connector_PinSocket_2.00mm +PinSocket_2x14_P2.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x14, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x14 2.00mm double row +0 +28 +28 +Connector_PinSocket_2.00mm +PinSocket_2x15_P2.00mm_Horizontal +Through hole angled socket strip, 2x15, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x15 2.00mm double row +0 +30 +30 +Connector_PinSocket_2.00mm +PinSocket_2x15_P2.00mm_Vertical +Through hole straight socket strip, 2x15, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x15 2.00mm double row +0 +30 +30 +Connector_PinSocket_2.00mm +PinSocket_2x15_P2.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x15, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x15 2.00mm double row +0 +30 +30 +Connector_PinSocket_2.00mm +PinSocket_2x16_P2.00mm_Horizontal +Through hole angled socket strip, 2x16, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x16 2.00mm double row +0 +32 +32 +Connector_PinSocket_2.00mm +PinSocket_2x16_P2.00mm_Vertical +Through hole straight socket strip, 2x16, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x16 2.00mm double row +0 +32 +32 +Connector_PinSocket_2.00mm +PinSocket_2x16_P2.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x16, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x16 2.00mm double row +0 +32 +32 +Connector_PinSocket_2.00mm +PinSocket_2x17_P2.00mm_Horizontal +Through hole angled socket strip, 2x17, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x17 2.00mm double row +0 +34 +34 +Connector_PinSocket_2.00mm +PinSocket_2x17_P2.00mm_Vertical +Through hole straight socket strip, 2x17, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x17 2.00mm double row +0 +34 +34 +Connector_PinSocket_2.00mm +PinSocket_2x17_P2.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x17, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x17 2.00mm double row +0 +34 +34 +Connector_PinSocket_2.00mm +PinSocket_2x18_P2.00mm_Horizontal +Through hole angled socket strip, 2x18, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x18 2.00mm double row +0 +36 +36 +Connector_PinSocket_2.00mm +PinSocket_2x18_P2.00mm_Vertical +Through hole straight socket strip, 2x18, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x18 2.00mm double row +0 +36 +36 +Connector_PinSocket_2.00mm +PinSocket_2x18_P2.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x18, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x18 2.00mm double row +0 +36 +36 +Connector_PinSocket_2.00mm +PinSocket_2x19_P2.00mm_Horizontal +Through hole angled socket strip, 2x19, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x19 2.00mm double row +0 +38 +38 +Connector_PinSocket_2.00mm +PinSocket_2x19_P2.00mm_Vertical +Through hole straight socket strip, 2x19, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x19 2.00mm double row +0 +38 +38 +Connector_PinSocket_2.00mm +PinSocket_2x19_P2.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x19, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x19 2.00mm double row +0 +38 +38 +Connector_PinSocket_2.00mm +PinSocket_2x20_P2.00mm_Horizontal +Through hole angled socket strip, 2x20, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x20 2.00mm double row +0 +40 +40 +Connector_PinSocket_2.00mm +PinSocket_2x20_P2.00mm_Vertical +Through hole straight socket strip, 2x20, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x20 2.00mm double row +0 +40 +40 +Connector_PinSocket_2.00mm +PinSocket_2x20_P2.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x20, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x20 2.00mm double row +0 +40 +40 +Connector_PinSocket_2.00mm +PinSocket_2x21_P2.00mm_Horizontal +Through hole angled socket strip, 2x21, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x21 2.00mm double row +0 +42 +42 +Connector_PinSocket_2.00mm +PinSocket_2x21_P2.00mm_Vertical +Through hole straight socket strip, 2x21, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x21 2.00mm double row +0 +42 +42 +Connector_PinSocket_2.00mm +PinSocket_2x21_P2.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x21, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x21 2.00mm double row +0 +42 +42 +Connector_PinSocket_2.00mm +PinSocket_2x22_P2.00mm_Horizontal +Through hole angled socket strip, 2x22, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x22 2.00mm double row +0 +44 +44 +Connector_PinSocket_2.00mm +PinSocket_2x22_P2.00mm_Vertical +Through hole straight socket strip, 2x22, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x22 2.00mm double row +0 +44 +44 +Connector_PinSocket_2.00mm +PinSocket_2x22_P2.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x22, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x22 2.00mm double row +0 +44 +44 +Connector_PinSocket_2.00mm +PinSocket_2x23_P2.00mm_Horizontal +Through hole angled socket strip, 2x23, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x23 2.00mm double row +0 +46 +46 +Connector_PinSocket_2.00mm +PinSocket_2x23_P2.00mm_Vertical +Through hole straight socket strip, 2x23, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x23 2.00mm double row +0 +46 +46 +Connector_PinSocket_2.00mm +PinSocket_2x23_P2.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x23, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x23 2.00mm double row +0 +46 +46 +Connector_PinSocket_2.00mm +PinSocket_2x24_P2.00mm_Horizontal +Through hole angled socket strip, 2x24, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x24 2.00mm double row +0 +48 +48 +Connector_PinSocket_2.00mm +PinSocket_2x24_P2.00mm_Vertical +Through hole straight socket strip, 2x24, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x24 2.00mm double row +0 +48 +48 +Connector_PinSocket_2.00mm +PinSocket_2x24_P2.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x24, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x24 2.00mm double row +0 +48 +48 +Connector_PinSocket_2.00mm +PinSocket_2x25_P2.00mm_Horizontal +Through hole angled socket strip, 2x25, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x25 2.00mm double row +0 +50 +50 +Connector_PinSocket_2.00mm +PinSocket_2x25_P2.00mm_Vertical +Through hole straight socket strip, 2x25, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x25 2.00mm double row +0 +50 +50 +Connector_PinSocket_2.00mm +PinSocket_2x25_P2.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x25, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x25 2.00mm double row +0 +50 +50 +Connector_PinSocket_2.00mm +PinSocket_2x26_P2.00mm_Horizontal +Through hole angled socket strip, 2x26, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x26 2.00mm double row +0 +52 +52 +Connector_PinSocket_2.00mm +PinSocket_2x26_P2.00mm_Vertical +Through hole straight socket strip, 2x26, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x26 2.00mm double row +0 +52 +52 +Connector_PinSocket_2.00mm +PinSocket_2x26_P2.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x26, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x26 2.00mm double row +0 +52 +52 +Connector_PinSocket_2.00mm +PinSocket_2x27_P2.00mm_Horizontal +Through hole angled socket strip, 2x27, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x27 2.00mm double row +0 +54 +54 +Connector_PinSocket_2.00mm +PinSocket_2x27_P2.00mm_Vertical +Through hole straight socket strip, 2x27, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x27 2.00mm double row +0 +54 +54 +Connector_PinSocket_2.00mm +PinSocket_2x27_P2.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x27, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x27 2.00mm double row +0 +54 +54 +Connector_PinSocket_2.00mm +PinSocket_2x28_P2.00mm_Horizontal +Through hole angled socket strip, 2x28, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x28 2.00mm double row +0 +56 +56 +Connector_PinSocket_2.00mm +PinSocket_2x28_P2.00mm_Vertical +Through hole straight socket strip, 2x28, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x28 2.00mm double row +0 +56 +56 +Connector_PinSocket_2.00mm +PinSocket_2x28_P2.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x28, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x28 2.00mm double row +0 +56 +56 +Connector_PinSocket_2.00mm +PinSocket_2x29_P2.00mm_Horizontal +Through hole angled socket strip, 2x29, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x29 2.00mm double row +0 +58 +58 +Connector_PinSocket_2.00mm +PinSocket_2x29_P2.00mm_Vertical +Through hole straight socket strip, 2x29, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x29 2.00mm double row +0 +58 +58 +Connector_PinSocket_2.00mm +PinSocket_2x29_P2.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x29, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x29 2.00mm double row +0 +58 +58 +Connector_PinSocket_2.00mm +PinSocket_2x30_P2.00mm_Horizontal +Through hole angled socket strip, 2x30, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x30 2.00mm double row +0 +60 +60 +Connector_PinSocket_2.00mm +PinSocket_2x30_P2.00mm_Vertical +Through hole straight socket strip, 2x30, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x30 2.00mm double row +0 +60 +60 +Connector_PinSocket_2.00mm +PinSocket_2x30_P2.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x30, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x30 2.00mm double row +0 +60 +60 +Connector_PinSocket_2.00mm +PinSocket_2x31_P2.00mm_Horizontal +Through hole angled socket strip, 2x31, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x31 2.00mm double row +0 +62 +62 +Connector_PinSocket_2.00mm +PinSocket_2x31_P2.00mm_Vertical +Through hole straight socket strip, 2x31, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x31 2.00mm double row +0 +62 +62 +Connector_PinSocket_2.00mm +PinSocket_2x31_P2.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x31, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x31 2.00mm double row +0 +62 +62 +Connector_PinSocket_2.00mm +PinSocket_2x32_P2.00mm_Horizontal +Through hole angled socket strip, 2x32, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x32 2.00mm double row +0 +64 +64 +Connector_PinSocket_2.00mm +PinSocket_2x32_P2.00mm_Vertical +Through hole straight socket strip, 2x32, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x32 2.00mm double row +0 +64 +64 +Connector_PinSocket_2.00mm +PinSocket_2x32_P2.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x32, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x32 2.00mm double row +0 +64 +64 +Connector_PinSocket_2.00mm +PinSocket_2x33_P2.00mm_Horizontal +Through hole angled socket strip, 2x33, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x33 2.00mm double row +0 +66 +66 +Connector_PinSocket_2.00mm +PinSocket_2x33_P2.00mm_Vertical +Through hole straight socket strip, 2x33, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x33 2.00mm double row +0 +66 +66 +Connector_PinSocket_2.00mm +PinSocket_2x33_P2.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x33, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x33 2.00mm double row +0 +66 +66 +Connector_PinSocket_2.00mm +PinSocket_2x34_P2.00mm_Horizontal +Through hole angled socket strip, 2x34, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x34 2.00mm double row +0 +68 +68 +Connector_PinSocket_2.00mm +PinSocket_2x34_P2.00mm_Vertical +Through hole straight socket strip, 2x34, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x34 2.00mm double row +0 +68 +68 +Connector_PinSocket_2.00mm +PinSocket_2x34_P2.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x34, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x34 2.00mm double row +0 +68 +68 +Connector_PinSocket_2.00mm +PinSocket_2x35_P2.00mm_Horizontal +Through hole angled socket strip, 2x35, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x35 2.00mm double row +0 +70 +70 +Connector_PinSocket_2.00mm +PinSocket_2x35_P2.00mm_Vertical +Through hole straight socket strip, 2x35, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x35 2.00mm double row +0 +70 +70 +Connector_PinSocket_2.00mm +PinSocket_2x35_P2.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x35, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x35 2.00mm double row +0 +70 +70 +Connector_PinSocket_2.00mm +PinSocket_2x36_P2.00mm_Horizontal +Through hole angled socket strip, 2x36, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x36 2.00mm double row +0 +72 +72 +Connector_PinSocket_2.00mm +PinSocket_2x36_P2.00mm_Vertical +Through hole straight socket strip, 2x36, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x36 2.00mm double row +0 +72 +72 +Connector_PinSocket_2.00mm +PinSocket_2x36_P2.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x36, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x36 2.00mm double row +0 +72 +72 +Connector_PinSocket_2.00mm +PinSocket_2x37_P2.00mm_Horizontal +Through hole angled socket strip, 2x37, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x37 2.00mm double row +0 +74 +74 +Connector_PinSocket_2.00mm +PinSocket_2x37_P2.00mm_Vertical +Through hole straight socket strip, 2x37, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x37 2.00mm double row +0 +74 +74 +Connector_PinSocket_2.00mm +PinSocket_2x37_P2.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x37, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x37 2.00mm double row +0 +74 +74 +Connector_PinSocket_2.00mm +PinSocket_2x38_P2.00mm_Horizontal +Through hole angled socket strip, 2x38, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x38 2.00mm double row +0 +76 +76 +Connector_PinSocket_2.00mm +PinSocket_2x38_P2.00mm_Vertical +Through hole straight socket strip, 2x38, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x38 2.00mm double row +0 +76 +76 +Connector_PinSocket_2.00mm +PinSocket_2x38_P2.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x38, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x38 2.00mm double row +0 +76 +76 +Connector_PinSocket_2.00mm +PinSocket_2x39_P2.00mm_Horizontal +Through hole angled socket strip, 2x39, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x39 2.00mm double row +0 +78 +78 +Connector_PinSocket_2.00mm +PinSocket_2x39_P2.00mm_Vertical +Through hole straight socket strip, 2x39, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x39 2.00mm double row +0 +78 +78 +Connector_PinSocket_2.00mm +PinSocket_2x39_P2.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x39, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x39 2.00mm double row +0 +78 +78 +Connector_PinSocket_2.00mm +PinSocket_2x40_P2.00mm_Horizontal +Through hole angled socket strip, 2x40, 2.00mm pitch, 6.35mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x40 2.00mm double row +0 +80 +80 +Connector_PinSocket_2.00mm +PinSocket_2x40_P2.00mm_Vertical +Through hole straight socket strip, 2x40, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x40 2.00mm double row +0 +80 +80 +Connector_PinSocket_2.00mm +PinSocket_2x40_P2.00mm_Vertical_SMD +surface-mounted straight socket strip, 2x40, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x40 2.00mm double row +0 +80 +80 +Connector_PinSocket_2.54mm +PinSocket_1x01_P2.54mm_Horizontal +Through hole angled socket strip, 1x01, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x01 2.54mm single row +0 +1 +1 +Connector_PinSocket_2.54mm +PinSocket_1x01_P2.54mm_Vertical +Through hole straight socket strip, 1x01, 2.54mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x01 2.54mm single row +0 +1 +1 +Connector_PinSocket_2.54mm +PinSocket_1x02_P2.54mm_Horizontal +Through hole angled socket strip, 1x02, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x02 2.54mm single row +0 +2 +2 +Connector_PinSocket_2.54mm +PinSocket_1x02_P2.54mm_Vertical +Through hole straight socket strip, 1x02, 2.54mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x02 2.54mm single row +0 +2 +2 +Connector_PinSocket_2.54mm +PinSocket_1x02_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x02, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x02 2.54mm single row style1 pin1 left +0 +2 +2 +Connector_PinSocket_2.54mm +PinSocket_1x02_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x02, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x02 2.54mm single row style2 pin1 right +0 +2 +2 +Connector_PinSocket_2.54mm +PinSocket_1x03_P2.54mm_Horizontal +Through hole angled socket strip, 1x03, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x03 2.54mm single row +0 +3 +3 +Connector_PinSocket_2.54mm +PinSocket_1x03_P2.54mm_Vertical +Through hole straight socket strip, 1x03, 2.54mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x03 2.54mm single row +0 +3 +3 +Connector_PinSocket_2.54mm +PinSocket_1x03_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x03, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x03 2.54mm single row style1 pin1 left +0 +3 +3 +Connector_PinSocket_2.54mm +PinSocket_1x03_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x03, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x03 2.54mm single row style2 pin1 right +0 +3 +3 +Connector_PinSocket_2.54mm +PinSocket_1x04_P2.54mm_Horizontal +Through hole angled socket strip, 1x04, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x04 2.54mm single row +0 +4 +4 +Connector_PinSocket_2.54mm +PinSocket_1x04_P2.54mm_Vertical +Through hole straight socket strip, 1x04, 2.54mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x04 2.54mm single row +0 +4 +4 +Connector_PinSocket_2.54mm +PinSocket_1x04_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x04, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x04 2.54mm single row style1 pin1 left +0 +4 +4 +Connector_PinSocket_2.54mm +PinSocket_1x04_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x04, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x04 2.54mm single row style2 pin1 right +0 +4 +4 +Connector_PinSocket_2.54mm +PinSocket_1x05_P2.54mm_Horizontal +Through hole angled socket strip, 1x05, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x05 2.54mm single row +0 +5 +5 +Connector_PinSocket_2.54mm +PinSocket_1x05_P2.54mm_Vertical +Through hole straight socket strip, 1x05, 2.54mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x05 2.54mm single row +0 +5 +5 +Connector_PinSocket_2.54mm +PinSocket_1x05_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x05, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x05 2.54mm single row style1 pin1 left +0 +5 +5 +Connector_PinSocket_2.54mm +PinSocket_1x05_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x05, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x05 2.54mm single row style2 pin1 right +0 +5 +5 +Connector_PinSocket_2.54mm +PinSocket_1x06_P2.54mm_Horizontal +Through hole angled socket strip, 1x06, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x06 2.54mm single row +0 +6 +6 +Connector_PinSocket_2.54mm +PinSocket_1x06_P2.54mm_Vertical +Through hole straight socket strip, 1x06, 2.54mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x06 2.54mm single row +0 +6 +6 +Connector_PinSocket_2.54mm +PinSocket_1x06_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x06, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x06 2.54mm single row style1 pin1 left +0 +6 +6 +Connector_PinSocket_2.54mm +PinSocket_1x06_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x06, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x06 2.54mm single row style2 pin1 right +0 +6 +6 +Connector_PinSocket_2.54mm +PinSocket_1x07_P2.54mm_Horizontal +Through hole angled socket strip, 1x07, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x07 2.54mm single row +0 +7 +7 +Connector_PinSocket_2.54mm +PinSocket_1x07_P2.54mm_Vertical +Through hole straight socket strip, 1x07, 2.54mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x07 2.54mm single row +0 +7 +7 +Connector_PinSocket_2.54mm +PinSocket_1x07_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x07, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x07 2.54mm single row style1 pin1 left +0 +7 +7 +Connector_PinSocket_2.54mm +PinSocket_1x07_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x07, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x07 2.54mm single row style2 pin1 right +0 +7 +7 +Connector_PinSocket_2.54mm +PinSocket_1x08_P2.54mm_Horizontal +Through hole angled socket strip, 1x08, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x08 2.54mm single row +0 +8 +8 +Connector_PinSocket_2.54mm +PinSocket_1x08_P2.54mm_Vertical +Through hole straight socket strip, 1x08, 2.54mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x08 2.54mm single row +0 +8 +8 +Connector_PinSocket_2.54mm +PinSocket_1x08_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x08, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x08 2.54mm single row style1 pin1 left +0 +8 +8 +Connector_PinSocket_2.54mm +PinSocket_1x08_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x08, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x08 2.54mm single row style2 pin1 right +0 +8 +8 +Connector_PinSocket_2.54mm +PinSocket_1x09_P2.54mm_Horizontal +Through hole angled socket strip, 1x09, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x09 2.54mm single row +0 +9 +9 +Connector_PinSocket_2.54mm +PinSocket_1x09_P2.54mm_Vertical +Through hole straight socket strip, 1x09, 2.54mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x09 2.54mm single row +0 +9 +9 +Connector_PinSocket_2.54mm +PinSocket_1x09_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x09, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x09 2.54mm single row style1 pin1 left +0 +9 +9 +Connector_PinSocket_2.54mm +PinSocket_1x09_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x09, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x09 2.54mm single row style2 pin1 right +0 +9 +9 +Connector_PinSocket_2.54mm +PinSocket_1x10_P2.54mm_Horizontal +Through hole angled socket strip, 1x10, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x10 2.54mm single row +0 +10 +10 +Connector_PinSocket_2.54mm +PinSocket_1x10_P2.54mm_Vertical +Through hole straight socket strip, 1x10, 2.54mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x10 2.54mm single row +0 +10 +10 +Connector_PinSocket_2.54mm +PinSocket_1x10_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x10, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x10 2.54mm single row style1 pin1 left +0 +10 +10 +Connector_PinSocket_2.54mm +PinSocket_1x10_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x10, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x10 2.54mm single row style2 pin1 right +0 +10 +10 +Connector_PinSocket_2.54mm +PinSocket_1x11_P2.54mm_Horizontal +Through hole angled socket strip, 1x11, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x11 2.54mm single row +0 +11 +11 +Connector_PinSocket_2.54mm +PinSocket_1x11_P2.54mm_Vertical +Through hole straight socket strip, 1x11, 2.54mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x11 2.54mm single row +0 +11 +11 +Connector_PinSocket_2.54mm +PinSocket_1x11_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x11, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x11 2.54mm single row style1 pin1 left +0 +11 +11 +Connector_PinSocket_2.54mm +PinSocket_1x11_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x11, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x11 2.54mm single row style2 pin1 right +0 +11 +11 +Connector_PinSocket_2.54mm +PinSocket_1x12_P2.54mm_Horizontal +Through hole angled socket strip, 1x12, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x12 2.54mm single row +0 +12 +12 +Connector_PinSocket_2.54mm +PinSocket_1x12_P2.54mm_Vertical +Through hole straight socket strip, 1x12, 2.54mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x12 2.54mm single row +0 +12 +12 +Connector_PinSocket_2.54mm +PinSocket_1x12_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x12, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x12 2.54mm single row style1 pin1 left +0 +12 +12 +Connector_PinSocket_2.54mm +PinSocket_1x12_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x12, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x12 2.54mm single row style2 pin1 right +0 +12 +12 +Connector_PinSocket_2.54mm +PinSocket_1x13_P2.54mm_Horizontal +Through hole angled socket strip, 1x13, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x13 2.54mm single row +0 +13 +13 +Connector_PinSocket_2.54mm +PinSocket_1x13_P2.54mm_Vertical +Through hole straight socket strip, 1x13, 2.54mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x13 2.54mm single row +0 +13 +13 +Connector_PinSocket_2.54mm +PinSocket_1x13_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x13, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x13 2.54mm single row style1 pin1 left +0 +13 +13 +Connector_PinSocket_2.54mm +PinSocket_1x13_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x13, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x13 2.54mm single row style2 pin1 right +0 +13 +13 +Connector_PinSocket_2.54mm +PinSocket_1x14_P2.54mm_Horizontal +Through hole angled socket strip, 1x14, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x14 2.54mm single row +0 +14 +14 +Connector_PinSocket_2.54mm +PinSocket_1x14_P2.54mm_Vertical +Through hole straight socket strip, 1x14, 2.54mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x14 2.54mm single row +0 +14 +14 +Connector_PinSocket_2.54mm +PinSocket_1x14_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x14, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x14 2.54mm single row style1 pin1 left +0 +14 +14 +Connector_PinSocket_2.54mm +PinSocket_1x14_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x14, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x14 2.54mm single row style2 pin1 right +0 +14 +14 +Connector_PinSocket_2.54mm +PinSocket_1x15_P2.54mm_Horizontal +Through hole angled socket strip, 1x15, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x15 2.54mm single row +0 +15 +15 +Connector_PinSocket_2.54mm +PinSocket_1x15_P2.54mm_Vertical +Through hole straight socket strip, 1x15, 2.54mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x15 2.54mm single row +0 +15 +15 +Connector_PinSocket_2.54mm +PinSocket_1x15_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x15, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x15 2.54mm single row style1 pin1 left +0 +15 +15 +Connector_PinSocket_2.54mm +PinSocket_1x15_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x15, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x15 2.54mm single row style2 pin1 right +0 +15 +15 +Connector_PinSocket_2.54mm +PinSocket_1x16_P2.54mm_Horizontal +Through hole angled socket strip, 1x16, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x16 2.54mm single row +0 +16 +16 +Connector_PinSocket_2.54mm +PinSocket_1x16_P2.54mm_Vertical +Through hole straight socket strip, 1x16, 2.54mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x16 2.54mm single row +0 +16 +16 +Connector_PinSocket_2.54mm +PinSocket_1x16_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x16, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x16 2.54mm single row style1 pin1 left +0 +16 +16 +Connector_PinSocket_2.54mm +PinSocket_1x16_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x16, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x16 2.54mm single row style2 pin1 right +0 +16 +16 +Connector_PinSocket_2.54mm +PinSocket_1x17_P2.54mm_Horizontal +Through hole angled socket strip, 1x17, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x17 2.54mm single row +0 +17 +17 +Connector_PinSocket_2.54mm +PinSocket_1x17_P2.54mm_Vertical +Through hole straight socket strip, 1x17, 2.54mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x17 2.54mm single row +0 +17 +17 +Connector_PinSocket_2.54mm +PinSocket_1x17_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x17, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x17 2.54mm single row style1 pin1 left +0 +17 +17 +Connector_PinSocket_2.54mm +PinSocket_1x17_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x17, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x17 2.54mm single row style2 pin1 right +0 +17 +17 +Connector_PinSocket_2.54mm +PinSocket_1x18_P2.54mm_Horizontal +Through hole angled socket strip, 1x18, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x18 2.54mm single row +0 +18 +18 +Connector_PinSocket_2.54mm +PinSocket_1x18_P2.54mm_Vertical +Through hole straight socket strip, 1x18, 2.54mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x18 2.54mm single row +0 +18 +18 +Connector_PinSocket_2.54mm +PinSocket_1x18_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x18, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x18 2.54mm single row style1 pin1 left +0 +18 +18 +Connector_PinSocket_2.54mm +PinSocket_1x18_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x18, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x18 2.54mm single row style2 pin1 right +0 +18 +18 +Connector_PinSocket_2.54mm +PinSocket_1x19_P2.54mm_Horizontal +Through hole angled socket strip, 1x19, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x19 2.54mm single row +0 +19 +19 +Connector_PinSocket_2.54mm +PinSocket_1x19_P2.54mm_Vertical +Through hole straight socket strip, 1x19, 2.54mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x19 2.54mm single row +0 +19 +19 +Connector_PinSocket_2.54mm +PinSocket_1x19_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x19, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x19 2.54mm single row style1 pin1 left +0 +19 +19 +Connector_PinSocket_2.54mm +PinSocket_1x19_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x19, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x19 2.54mm single row style2 pin1 right +0 +19 +19 +Connector_PinSocket_2.54mm +PinSocket_1x20_P2.54mm_Horizontal +Through hole angled socket strip, 1x20, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x20 2.54mm single row +0 +20 +20 +Connector_PinSocket_2.54mm +PinSocket_1x20_P2.54mm_Vertical +Through hole straight socket strip, 1x20, 2.54mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x20 2.54mm single row +0 +20 +20 +Connector_PinSocket_2.54mm +PinSocket_1x20_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x20, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x20 2.54mm single row style1 pin1 left +0 +20 +20 +Connector_PinSocket_2.54mm +PinSocket_1x20_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x20, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x20 2.54mm single row style2 pin1 right +0 +20 +20 +Connector_PinSocket_2.54mm +PinSocket_1x21_P2.54mm_Horizontal +Through hole angled socket strip, 1x21, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x21 2.54mm single row +0 +21 +21 +Connector_PinSocket_2.54mm +PinSocket_1x21_P2.54mm_Vertical +Through hole straight socket strip, 1x21, 2.54mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x21 2.54mm single row +0 +21 +21 +Connector_PinSocket_2.54mm +PinSocket_1x21_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x21, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x21 2.54mm single row style1 pin1 left +0 +21 +21 +Connector_PinSocket_2.54mm +PinSocket_1x21_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x21, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x21 2.54mm single row style2 pin1 right +0 +21 +21 +Connector_PinSocket_2.54mm +PinSocket_1x22_P2.54mm_Horizontal +Through hole angled socket strip, 1x22, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x22 2.54mm single row +0 +22 +22 +Connector_PinSocket_2.54mm +PinSocket_1x22_P2.54mm_Vertical +Through hole straight socket strip, 1x22, 2.54mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x22 2.54mm single row +0 +22 +22 +Connector_PinSocket_2.54mm +PinSocket_1x22_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x22, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x22 2.54mm single row style1 pin1 left +0 +22 +22 +Connector_PinSocket_2.54mm +PinSocket_1x22_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x22, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x22 2.54mm single row style2 pin1 right +0 +22 +22 +Connector_PinSocket_2.54mm +PinSocket_1x23_P2.54mm_Horizontal +Through hole angled socket strip, 1x23, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x23 2.54mm single row +0 +23 +23 +Connector_PinSocket_2.54mm +PinSocket_1x23_P2.54mm_Vertical +Through hole straight socket strip, 1x23, 2.54mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x23 2.54mm single row +0 +23 +23 +Connector_PinSocket_2.54mm +PinSocket_1x23_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x23, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x23 2.54mm single row style1 pin1 left +0 +23 +23 +Connector_PinSocket_2.54mm +PinSocket_1x23_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x23, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x23 2.54mm single row style2 pin1 right +0 +23 +23 +Connector_PinSocket_2.54mm +PinSocket_1x24_P2.54mm_Horizontal +Through hole angled socket strip, 1x24, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x24 2.54mm single row +0 +24 +24 +Connector_PinSocket_2.54mm +PinSocket_1x24_P2.54mm_Vertical +Through hole straight socket strip, 1x24, 2.54mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x24 2.54mm single row +0 +24 +24 +Connector_PinSocket_2.54mm +PinSocket_1x24_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x24, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x24 2.54mm single row style1 pin1 left +0 +24 +24 +Connector_PinSocket_2.54mm +PinSocket_1x24_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x24, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x24 2.54mm single row style2 pin1 right +0 +24 +24 +Connector_PinSocket_2.54mm +PinSocket_1x25_P2.54mm_Horizontal +Through hole angled socket strip, 1x25, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x25 2.54mm single row +0 +25 +25 +Connector_PinSocket_2.54mm +PinSocket_1x25_P2.54mm_Vertical +Through hole straight socket strip, 1x25, 2.54mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x25 2.54mm single row +0 +25 +25 +Connector_PinSocket_2.54mm +PinSocket_1x25_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x25, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x25 2.54mm single row style1 pin1 left +0 +25 +25 +Connector_PinSocket_2.54mm +PinSocket_1x25_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x25, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x25 2.54mm single row style2 pin1 right +0 +25 +25 +Connector_PinSocket_2.54mm +PinSocket_1x26_P2.54mm_Horizontal +Through hole angled socket strip, 1x26, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x26 2.54mm single row +0 +26 +26 +Connector_PinSocket_2.54mm +PinSocket_1x26_P2.54mm_Vertical +Through hole straight socket strip, 1x26, 2.54mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x26 2.54mm single row +0 +26 +26 +Connector_PinSocket_2.54mm +PinSocket_1x26_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x26, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x26 2.54mm single row style1 pin1 left +0 +26 +26 +Connector_PinSocket_2.54mm +PinSocket_1x26_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x26, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x26 2.54mm single row style2 pin1 right +0 +26 +26 +Connector_PinSocket_2.54mm +PinSocket_1x27_P2.54mm_Horizontal +Through hole angled socket strip, 1x27, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x27 2.54mm single row +0 +27 +27 +Connector_PinSocket_2.54mm +PinSocket_1x27_P2.54mm_Vertical +Through hole straight socket strip, 1x27, 2.54mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x27 2.54mm single row +0 +27 +27 +Connector_PinSocket_2.54mm +PinSocket_1x27_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x27, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x27 2.54mm single row style1 pin1 left +0 +27 +27 +Connector_PinSocket_2.54mm +PinSocket_1x27_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x27, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x27 2.54mm single row style2 pin1 right +0 +27 +27 +Connector_PinSocket_2.54mm +PinSocket_1x28_P2.54mm_Horizontal +Through hole angled socket strip, 1x28, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x28 2.54mm single row +0 +28 +28 +Connector_PinSocket_2.54mm +PinSocket_1x28_P2.54mm_Vertical +Through hole straight socket strip, 1x28, 2.54mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x28 2.54mm single row +0 +28 +28 +Connector_PinSocket_2.54mm +PinSocket_1x28_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x28, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x28 2.54mm single row style1 pin1 left +0 +28 +28 +Connector_PinSocket_2.54mm +PinSocket_1x28_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x28, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x28 2.54mm single row style2 pin1 right +0 +28 +28 +Connector_PinSocket_2.54mm +PinSocket_1x29_P2.54mm_Horizontal +Through hole angled socket strip, 1x29, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x29 2.54mm single row +0 +29 +29 +Connector_PinSocket_2.54mm +PinSocket_1x29_P2.54mm_Vertical +Through hole straight socket strip, 1x29, 2.54mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x29 2.54mm single row +0 +29 +29 +Connector_PinSocket_2.54mm +PinSocket_1x29_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x29, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x29 2.54mm single row style1 pin1 left +0 +29 +29 +Connector_PinSocket_2.54mm +PinSocket_1x29_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x29, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x29 2.54mm single row style2 pin1 right +0 +29 +29 +Connector_PinSocket_2.54mm +PinSocket_1x30_P2.54mm_Horizontal +Through hole angled socket strip, 1x30, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x30 2.54mm single row +0 +30 +30 +Connector_PinSocket_2.54mm +PinSocket_1x30_P2.54mm_Vertical +Through hole straight socket strip, 1x30, 2.54mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x30 2.54mm single row +0 +30 +30 +Connector_PinSocket_2.54mm +PinSocket_1x30_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x30, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x30 2.54mm single row style1 pin1 left +0 +30 +30 +Connector_PinSocket_2.54mm +PinSocket_1x30_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x30, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x30 2.54mm single row style2 pin1 right +0 +30 +30 +Connector_PinSocket_2.54mm +PinSocket_1x31_P2.54mm_Horizontal +Through hole angled socket strip, 1x31, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x31 2.54mm single row +0 +31 +31 +Connector_PinSocket_2.54mm +PinSocket_1x31_P2.54mm_Vertical +Through hole straight socket strip, 1x31, 2.54mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x31 2.54mm single row +0 +31 +31 +Connector_PinSocket_2.54mm +PinSocket_1x31_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x31, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x31 2.54mm single row style1 pin1 left +0 +31 +31 +Connector_PinSocket_2.54mm +PinSocket_1x31_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x31, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x31 2.54mm single row style2 pin1 right +0 +31 +31 +Connector_PinSocket_2.54mm +PinSocket_1x32_P2.54mm_Horizontal +Through hole angled socket strip, 1x32, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x32 2.54mm single row +0 +32 +32 +Connector_PinSocket_2.54mm +PinSocket_1x32_P2.54mm_Vertical +Through hole straight socket strip, 1x32, 2.54mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x32 2.54mm single row +0 +32 +32 +Connector_PinSocket_2.54mm +PinSocket_1x32_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x32, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x32 2.54mm single row style1 pin1 left +0 +32 +32 +Connector_PinSocket_2.54mm +PinSocket_1x32_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x32, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x32 2.54mm single row style2 pin1 right +0 +32 +32 +Connector_PinSocket_2.54mm +PinSocket_1x33_P2.54mm_Horizontal +Through hole angled socket strip, 1x33, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x33 2.54mm single row +0 +33 +33 +Connector_PinSocket_2.54mm +PinSocket_1x33_P2.54mm_Vertical +Through hole straight socket strip, 1x33, 2.54mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x33 2.54mm single row +0 +33 +33 +Connector_PinSocket_2.54mm +PinSocket_1x33_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x33, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x33 2.54mm single row style1 pin1 left +0 +33 +33 +Connector_PinSocket_2.54mm +PinSocket_1x33_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x33, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x33 2.54mm single row style2 pin1 right +0 +33 +33 +Connector_PinSocket_2.54mm +PinSocket_1x34_P2.54mm_Horizontal +Through hole angled socket strip, 1x34, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x34 2.54mm single row +0 +34 +34 +Connector_PinSocket_2.54mm +PinSocket_1x34_P2.54mm_Vertical +Through hole straight socket strip, 1x34, 2.54mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x34 2.54mm single row +0 +34 +34 +Connector_PinSocket_2.54mm +PinSocket_1x34_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x34, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x34 2.54mm single row style1 pin1 left +0 +34 +34 +Connector_PinSocket_2.54mm +PinSocket_1x34_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x34, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x34 2.54mm single row style2 pin1 right +0 +34 +34 +Connector_PinSocket_2.54mm +PinSocket_1x35_P2.54mm_Horizontal +Through hole angled socket strip, 1x35, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x35 2.54mm single row +0 +35 +35 +Connector_PinSocket_2.54mm +PinSocket_1x35_P2.54mm_Vertical +Through hole straight socket strip, 1x35, 2.54mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x35 2.54mm single row +0 +35 +35 +Connector_PinSocket_2.54mm +PinSocket_1x35_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x35, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x35 2.54mm single row style1 pin1 left +0 +35 +35 +Connector_PinSocket_2.54mm +PinSocket_1x35_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x35, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x35 2.54mm single row style2 pin1 right +0 +35 +35 +Connector_PinSocket_2.54mm +PinSocket_1x36_P2.54mm_Horizontal +Through hole angled socket strip, 1x36, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x36 2.54mm single row +0 +36 +36 +Connector_PinSocket_2.54mm +PinSocket_1x36_P2.54mm_Vertical +Through hole straight socket strip, 1x36, 2.54mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x36 2.54mm single row +0 +36 +36 +Connector_PinSocket_2.54mm +PinSocket_1x36_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x36, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x36 2.54mm single row style1 pin1 left +0 +36 +36 +Connector_PinSocket_2.54mm +PinSocket_1x36_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x36, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x36 2.54mm single row style2 pin1 right +0 +36 +36 +Connector_PinSocket_2.54mm +PinSocket_1x37_P2.54mm_Horizontal +Through hole angled socket strip, 1x37, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x37 2.54mm single row +0 +37 +37 +Connector_PinSocket_2.54mm +PinSocket_1x37_P2.54mm_Vertical +Through hole straight socket strip, 1x37, 2.54mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x37 2.54mm single row +0 +37 +37 +Connector_PinSocket_2.54mm +PinSocket_1x37_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x37, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x37 2.54mm single row style1 pin1 left +0 +37 +37 +Connector_PinSocket_2.54mm +PinSocket_1x37_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x37, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x37 2.54mm single row style2 pin1 right +0 +37 +37 +Connector_PinSocket_2.54mm +PinSocket_1x38_P2.54mm_Horizontal +Through hole angled socket strip, 1x38, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x38 2.54mm single row +0 +38 +38 +Connector_PinSocket_2.54mm +PinSocket_1x38_P2.54mm_Vertical +Through hole straight socket strip, 1x38, 2.54mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x38 2.54mm single row +0 +38 +38 +Connector_PinSocket_2.54mm +PinSocket_1x38_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x38, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x38 2.54mm single row style1 pin1 left +0 +38 +38 +Connector_PinSocket_2.54mm +PinSocket_1x38_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x38, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x38 2.54mm single row style2 pin1 right +0 +38 +38 +Connector_PinSocket_2.54mm +PinSocket_1x39_P2.54mm_Horizontal +Through hole angled socket strip, 1x39, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x39 2.54mm single row +0 +39 +39 +Connector_PinSocket_2.54mm +PinSocket_1x39_P2.54mm_Vertical +Through hole straight socket strip, 1x39, 2.54mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x39 2.54mm single row +0 +39 +39 +Connector_PinSocket_2.54mm +PinSocket_1x39_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x39, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x39 2.54mm single row style1 pin1 left +0 +39 +39 +Connector_PinSocket_2.54mm +PinSocket_1x39_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x39, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x39 2.54mm single row style2 pin1 right +0 +39 +39 +Connector_PinSocket_2.54mm +PinSocket_1x40_P2.54mm_Horizontal +Through hole angled socket strip, 1x40, 2.54mm pitch, 8.51mm socket length, single row (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 1x40 2.54mm single row +0 +40 +40 +Connector_PinSocket_2.54mm +PinSocket_1x40_P2.54mm_Vertical +Through hole straight socket strip, 1x40, 2.54mm pitch, single row (from Kicad 4.0.7), script generated +Through hole socket strip THT 1x40 2.54mm single row +0 +40 +40 +Connector_PinSocket_2.54mm +PinSocket_1x40_P2.54mm_Vertical_SMD_Pin1Left +surface-mounted straight socket strip, 1x40, 2.54mm pitch, single row, style 1 (pin 1 left) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x40 2.54mm single row style1 pin1 left +0 +40 +40 +Connector_PinSocket_2.54mm +PinSocket_1x40_P2.54mm_Vertical_SMD_Pin1Right +surface-mounted straight socket strip, 1x40, 2.54mm pitch, single row, style 2 (pin 1 right) (https://cdn.harwin.com/pdfs/M20-786.pdf), script generated +Surface mounted socket strip SMD 1x40 2.54mm single row style2 pin1 right +0 +40 +40 +Connector_PinSocket_2.54mm +PinSocket_2x01_P2.54mm_Horizontal +Through hole angled socket strip, 2x01, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x01 2.54mm double row +0 +2 +2 +Connector_PinSocket_2.54mm +PinSocket_2x01_P2.54mm_Vertical +Through hole straight socket strip, 2x01, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x01 2.54mm double row +0 +2 +2 +Connector_PinSocket_2.54mm +PinSocket_2x01_P2.54mm_Vertical_SMD +surface-mounted straight socket strip, 2x01, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x01 2.54mm double row +0 +2 +2 +Connector_PinSocket_2.54mm +PinSocket_2x02_P2.54mm_Horizontal +Through hole angled socket strip, 2x02, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x02 2.54mm double row +0 +4 +4 +Connector_PinSocket_2.54mm +PinSocket_2x02_P2.54mm_Vertical +Through hole straight socket strip, 2x02, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x02 2.54mm double row +0 +4 +4 +Connector_PinSocket_2.54mm +PinSocket_2x02_P2.54mm_Vertical_SMD +surface-mounted straight socket strip, 2x02, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x02 2.54mm double row +0 +4 +4 +Connector_PinSocket_2.54mm +PinSocket_2x03_P2.54mm_Horizontal +Through hole angled socket strip, 2x03, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x03 2.54mm double row +0 +6 +6 +Connector_PinSocket_2.54mm +PinSocket_2x03_P2.54mm_Vertical +Through hole straight socket strip, 2x03, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x03 2.54mm double row +0 +6 +6 +Connector_PinSocket_2.54mm +PinSocket_2x03_P2.54mm_Vertical_SMD +surface-mounted straight socket strip, 2x03, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x03 2.54mm double row +0 +6 +6 +Connector_PinSocket_2.54mm +PinSocket_2x04_P2.54mm_Horizontal +Through hole angled socket strip, 2x04, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x04 2.54mm double row +0 +8 +8 +Connector_PinSocket_2.54mm +PinSocket_2x04_P2.54mm_Vertical +Through hole straight socket strip, 2x04, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x04 2.54mm double row +0 +8 +8 +Connector_PinSocket_2.54mm +PinSocket_2x04_P2.54mm_Vertical_SMD +surface-mounted straight socket strip, 2x04, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x04 2.54mm double row +0 +8 +8 +Connector_PinSocket_2.54mm +PinSocket_2x05_P2.54mm_Horizontal +Through hole angled socket strip, 2x05, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x05 2.54mm double row +0 +10 +10 +Connector_PinSocket_2.54mm +PinSocket_2x05_P2.54mm_Vertical +Through hole straight socket strip, 2x05, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x05 2.54mm double row +0 +10 +10 +Connector_PinSocket_2.54mm +PinSocket_2x05_P2.54mm_Vertical_SMD +surface-mounted straight socket strip, 2x05, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x05 2.54mm double row +0 +10 +10 +Connector_PinSocket_2.54mm +PinSocket_2x06_P2.54mm_Horizontal +Through hole angled socket strip, 2x06, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x06 2.54mm double row +0 +12 +12 +Connector_PinSocket_2.54mm +PinSocket_2x06_P2.54mm_Vertical +Through hole straight socket strip, 2x06, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x06 2.54mm double row +0 +12 +12 +Connector_PinSocket_2.54mm +PinSocket_2x06_P2.54mm_Vertical_SMD +surface-mounted straight socket strip, 2x06, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x06 2.54mm double row +0 +12 +12 +Connector_PinSocket_2.54mm +PinSocket_2x07_P2.54mm_Horizontal +Through hole angled socket strip, 2x07, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x07 2.54mm double row +0 +14 +14 +Connector_PinSocket_2.54mm +PinSocket_2x07_P2.54mm_Vertical +Through hole straight socket strip, 2x07, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x07 2.54mm double row +0 +14 +14 +Connector_PinSocket_2.54mm +PinSocket_2x07_P2.54mm_Vertical_SMD +surface-mounted straight socket strip, 2x07, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x07 2.54mm double row +0 +14 +14 +Connector_PinSocket_2.54mm +PinSocket_2x08_P2.54mm_Horizontal +Through hole angled socket strip, 2x08, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x08 2.54mm double row +0 +16 +16 +Connector_PinSocket_2.54mm +PinSocket_2x08_P2.54mm_Vertical +Through hole straight socket strip, 2x08, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x08 2.54mm double row +0 +16 +16 +Connector_PinSocket_2.54mm +PinSocket_2x08_P2.54mm_Vertical_SMD +surface-mounted straight socket strip, 2x08, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x08 2.54mm double row +0 +16 +16 +Connector_PinSocket_2.54mm +PinSocket_2x09_P2.54mm_Horizontal +Through hole angled socket strip, 2x09, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x09 2.54mm double row +0 +18 +18 +Connector_PinSocket_2.54mm +PinSocket_2x09_P2.54mm_Vertical +Through hole straight socket strip, 2x09, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x09 2.54mm double row +0 +18 +18 +Connector_PinSocket_2.54mm +PinSocket_2x09_P2.54mm_Vertical_SMD +surface-mounted straight socket strip, 2x09, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x09 2.54mm double row +0 +18 +18 +Connector_PinSocket_2.54mm +PinSocket_2x10_P2.54mm_Horizontal +Through hole angled socket strip, 2x10, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x10 2.54mm double row +0 +20 +20 +Connector_PinSocket_2.54mm +PinSocket_2x10_P2.54mm_Vertical +Through hole straight socket strip, 2x10, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x10 2.54mm double row +0 +20 +20 +Connector_PinSocket_2.54mm +PinSocket_2x10_P2.54mm_Vertical_SMD +surface-mounted straight socket strip, 2x10, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x10 2.54mm double row +0 +20 +20 +Connector_PinSocket_2.54mm +PinSocket_2x11_P2.54mm_Horizontal +Through hole angled socket strip, 2x11, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x11 2.54mm double row +0 +22 +22 +Connector_PinSocket_2.54mm +PinSocket_2x11_P2.54mm_Vertical +Through hole straight socket strip, 2x11, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x11 2.54mm double row +0 +22 +22 +Connector_PinSocket_2.54mm +PinSocket_2x11_P2.54mm_Vertical_SMD +surface-mounted straight socket strip, 2x11, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x11 2.54mm double row +0 +22 +22 +Connector_PinSocket_2.54mm +PinSocket_2x12_P2.54mm_Horizontal +Through hole angled socket strip, 2x12, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x12 2.54mm double row +0 +24 +24 +Connector_PinSocket_2.54mm +PinSocket_2x12_P2.54mm_Vertical +Through hole straight socket strip, 2x12, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x12 2.54mm double row +0 +24 +24 +Connector_PinSocket_2.54mm +PinSocket_2x12_P2.54mm_Vertical_SMD +surface-mounted straight socket strip, 2x12, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x12 2.54mm double row +0 +24 +24 +Connector_PinSocket_2.54mm +PinSocket_2x13_P2.54mm_Horizontal +Through hole angled socket strip, 2x13, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x13 2.54mm double row +0 +26 +26 +Connector_PinSocket_2.54mm +PinSocket_2x13_P2.54mm_Vertical +Through hole straight socket strip, 2x13, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x13 2.54mm double row +0 +26 +26 +Connector_PinSocket_2.54mm +PinSocket_2x13_P2.54mm_Vertical_SMD +surface-mounted straight socket strip, 2x13, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x13 2.54mm double row +0 +26 +26 +Connector_PinSocket_2.54mm +PinSocket_2x14_P2.54mm_Horizontal +Through hole angled socket strip, 2x14, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x14 2.54mm double row +0 +28 +28 +Connector_PinSocket_2.54mm +PinSocket_2x14_P2.54mm_Vertical +Through hole straight socket strip, 2x14, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x14 2.54mm double row +0 +28 +28 +Connector_PinSocket_2.54mm +PinSocket_2x14_P2.54mm_Vertical_SMD +surface-mounted straight socket strip, 2x14, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x14 2.54mm double row +0 +28 +28 +Connector_PinSocket_2.54mm +PinSocket_2x15_P2.54mm_Horizontal +Through hole angled socket strip, 2x15, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x15 2.54mm double row +0 +30 +30 +Connector_PinSocket_2.54mm +PinSocket_2x15_P2.54mm_Vertical +Through hole straight socket strip, 2x15, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x15 2.54mm double row +0 +30 +30 +Connector_PinSocket_2.54mm +PinSocket_2x15_P2.54mm_Vertical_SMD +surface-mounted straight socket strip, 2x15, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x15 2.54mm double row +0 +30 +30 +Connector_PinSocket_2.54mm +PinSocket_2x16_P2.54mm_Horizontal +Through hole angled socket strip, 2x16, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x16 2.54mm double row +0 +32 +32 +Connector_PinSocket_2.54mm +PinSocket_2x16_P2.54mm_Vertical +Through hole straight socket strip, 2x16, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x16 2.54mm double row +0 +32 +32 +Connector_PinSocket_2.54mm +PinSocket_2x16_P2.54mm_Vertical_SMD +surface-mounted straight socket strip, 2x16, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x16 2.54mm double row +0 +32 +32 +Connector_PinSocket_2.54mm +PinSocket_2x17_P2.54mm_Horizontal +Through hole angled socket strip, 2x17, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x17 2.54mm double row +0 +34 +34 +Connector_PinSocket_2.54mm +PinSocket_2x17_P2.54mm_Vertical +Through hole straight socket strip, 2x17, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x17 2.54mm double row +0 +34 +34 +Connector_PinSocket_2.54mm +PinSocket_2x17_P2.54mm_Vertical_SMD +surface-mounted straight socket strip, 2x17, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x17 2.54mm double row +0 +34 +34 +Connector_PinSocket_2.54mm +PinSocket_2x18_P2.54mm_Horizontal +Through hole angled socket strip, 2x18, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x18 2.54mm double row +0 +36 +36 +Connector_PinSocket_2.54mm +PinSocket_2x18_P2.54mm_Vertical +Through hole straight socket strip, 2x18, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x18 2.54mm double row +0 +36 +36 +Connector_PinSocket_2.54mm +PinSocket_2x18_P2.54mm_Vertical_SMD +surface-mounted straight socket strip, 2x18, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x18 2.54mm double row +0 +36 +36 +Connector_PinSocket_2.54mm +PinSocket_2x19_P2.54mm_Horizontal +Through hole angled socket strip, 2x19, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x19 2.54mm double row +0 +38 +38 +Connector_PinSocket_2.54mm +PinSocket_2x19_P2.54mm_Vertical +Through hole straight socket strip, 2x19, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x19 2.54mm double row +0 +38 +38 +Connector_PinSocket_2.54mm +PinSocket_2x19_P2.54mm_Vertical_SMD +surface-mounted straight socket strip, 2x19, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x19 2.54mm double row +0 +38 +38 +Connector_PinSocket_2.54mm +PinSocket_2x20_P2.54mm_Horizontal +Through hole angled socket strip, 2x20, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x20 2.54mm double row +0 +40 +40 +Connector_PinSocket_2.54mm +PinSocket_2x20_P2.54mm_Vertical +Through hole straight socket strip, 2x20, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x20 2.54mm double row +0 +40 +40 +Connector_PinSocket_2.54mm +PinSocket_2x20_P2.54mm_Vertical_SMD +surface-mounted straight socket strip, 2x20, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x20 2.54mm double row +0 +40 +40 +Connector_PinSocket_2.54mm +PinSocket_2x21_P2.54mm_Horizontal +Through hole angled socket strip, 2x21, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x21 2.54mm double row +0 +42 +42 +Connector_PinSocket_2.54mm +PinSocket_2x21_P2.54mm_Vertical +Through hole straight socket strip, 2x21, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x21 2.54mm double row +0 +42 +42 +Connector_PinSocket_2.54mm +PinSocket_2x21_P2.54mm_Vertical_SMD +surface-mounted straight socket strip, 2x21, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x21 2.54mm double row +0 +42 +42 +Connector_PinSocket_2.54mm +PinSocket_2x22_P2.54mm_Horizontal +Through hole angled socket strip, 2x22, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x22 2.54mm double row +0 +44 +44 +Connector_PinSocket_2.54mm +PinSocket_2x22_P2.54mm_Vertical +Through hole straight socket strip, 2x22, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x22 2.54mm double row +0 +44 +44 +Connector_PinSocket_2.54mm +PinSocket_2x22_P2.54mm_Vertical_SMD +surface-mounted straight socket strip, 2x22, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x22 2.54mm double row +0 +44 +44 +Connector_PinSocket_2.54mm +PinSocket_2x23_P2.54mm_Horizontal +Through hole angled socket strip, 2x23, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x23 2.54mm double row +0 +46 +46 +Connector_PinSocket_2.54mm +PinSocket_2x23_P2.54mm_Vertical +Through hole straight socket strip, 2x23, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x23 2.54mm double row +0 +46 +46 +Connector_PinSocket_2.54mm +PinSocket_2x23_P2.54mm_Vertical_SMD +surface-mounted straight socket strip, 2x23, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x23 2.54mm double row +0 +46 +46 +Connector_PinSocket_2.54mm +PinSocket_2x24_P2.54mm_Horizontal +Through hole angled socket strip, 2x24, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x24 2.54mm double row +0 +48 +48 +Connector_PinSocket_2.54mm +PinSocket_2x24_P2.54mm_Vertical +Through hole straight socket strip, 2x24, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x24 2.54mm double row +0 +48 +48 +Connector_PinSocket_2.54mm +PinSocket_2x24_P2.54mm_Vertical_SMD +surface-mounted straight socket strip, 2x24, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x24 2.54mm double row +0 +48 +48 +Connector_PinSocket_2.54mm +PinSocket_2x25_P2.54mm_Horizontal +Through hole angled socket strip, 2x25, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x25 2.54mm double row +0 +50 +50 +Connector_PinSocket_2.54mm +PinSocket_2x25_P2.54mm_Vertical +Through hole straight socket strip, 2x25, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x25 2.54mm double row +0 +50 +50 +Connector_PinSocket_2.54mm +PinSocket_2x25_P2.54mm_Vertical_SMD +surface-mounted straight socket strip, 2x25, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x25 2.54mm double row +0 +50 +50 +Connector_PinSocket_2.54mm +PinSocket_2x26_P2.54mm_Horizontal +Through hole angled socket strip, 2x26, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x26 2.54mm double row +0 +52 +52 +Connector_PinSocket_2.54mm +PinSocket_2x26_P2.54mm_Vertical +Through hole straight socket strip, 2x26, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x26 2.54mm double row +0 +52 +52 +Connector_PinSocket_2.54mm +PinSocket_2x26_P2.54mm_Vertical_SMD +surface-mounted straight socket strip, 2x26, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x26 2.54mm double row +0 +52 +52 +Connector_PinSocket_2.54mm +PinSocket_2x27_P2.54mm_Horizontal +Through hole angled socket strip, 2x27, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x27 2.54mm double row +0 +54 +54 +Connector_PinSocket_2.54mm +PinSocket_2x27_P2.54mm_Vertical +Through hole straight socket strip, 2x27, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x27 2.54mm double row +0 +54 +54 +Connector_PinSocket_2.54mm +PinSocket_2x27_P2.54mm_Vertical_SMD +surface-mounted straight socket strip, 2x27, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x27 2.54mm double row +0 +54 +54 +Connector_PinSocket_2.54mm +PinSocket_2x28_P2.54mm_Horizontal +Through hole angled socket strip, 2x28, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x28 2.54mm double row +0 +56 +56 +Connector_PinSocket_2.54mm +PinSocket_2x28_P2.54mm_Vertical +Through hole straight socket strip, 2x28, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x28 2.54mm double row +0 +56 +56 +Connector_PinSocket_2.54mm +PinSocket_2x28_P2.54mm_Vertical_SMD +surface-mounted straight socket strip, 2x28, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x28 2.54mm double row +0 +56 +56 +Connector_PinSocket_2.54mm +PinSocket_2x29_P2.54mm_Horizontal +Through hole angled socket strip, 2x29, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x29 2.54mm double row +0 +58 +58 +Connector_PinSocket_2.54mm +PinSocket_2x29_P2.54mm_Vertical +Through hole straight socket strip, 2x29, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x29 2.54mm double row +0 +58 +58 +Connector_PinSocket_2.54mm +PinSocket_2x29_P2.54mm_Vertical_SMD +surface-mounted straight socket strip, 2x29, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x29 2.54mm double row +0 +58 +58 +Connector_PinSocket_2.54mm +PinSocket_2x30_P2.54mm_Horizontal +Through hole angled socket strip, 2x30, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x30 2.54mm double row +0 +60 +60 +Connector_PinSocket_2.54mm +PinSocket_2x30_P2.54mm_Vertical +Through hole straight socket strip, 2x30, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x30 2.54mm double row +0 +60 +60 +Connector_PinSocket_2.54mm +PinSocket_2x30_P2.54mm_Vertical_SMD +surface-mounted straight socket strip, 2x30, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x30 2.54mm double row +0 +60 +60 +Connector_PinSocket_2.54mm +PinSocket_2x31_P2.54mm_Horizontal +Through hole angled socket strip, 2x31, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x31 2.54mm double row +0 +62 +62 +Connector_PinSocket_2.54mm +PinSocket_2x31_P2.54mm_Vertical +Through hole straight socket strip, 2x31, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x31 2.54mm double row +0 +62 +62 +Connector_PinSocket_2.54mm +PinSocket_2x31_P2.54mm_Vertical_SMD +surface-mounted straight socket strip, 2x31, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x31 2.54mm double row +0 +62 +62 +Connector_PinSocket_2.54mm +PinSocket_2x32_P2.54mm_Horizontal +Through hole angled socket strip, 2x32, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x32 2.54mm double row +0 +64 +64 +Connector_PinSocket_2.54mm +PinSocket_2x32_P2.54mm_Vertical +Through hole straight socket strip, 2x32, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x32 2.54mm double row +0 +64 +64 +Connector_PinSocket_2.54mm +PinSocket_2x32_P2.54mm_Vertical_SMD +surface-mounted straight socket strip, 2x32, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x32 2.54mm double row +0 +64 +64 +Connector_PinSocket_2.54mm +PinSocket_2x33_P2.54mm_Horizontal +Through hole angled socket strip, 2x33, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x33 2.54mm double row +0 +66 +66 +Connector_PinSocket_2.54mm +PinSocket_2x33_P2.54mm_Vertical +Through hole straight socket strip, 2x33, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x33 2.54mm double row +0 +66 +66 +Connector_PinSocket_2.54mm +PinSocket_2x33_P2.54mm_Vertical_SMD +surface-mounted straight socket strip, 2x33, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x33 2.54mm double row +0 +66 +66 +Connector_PinSocket_2.54mm +PinSocket_2x34_P2.54mm_Horizontal +Through hole angled socket strip, 2x34, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x34 2.54mm double row +0 +68 +68 +Connector_PinSocket_2.54mm +PinSocket_2x34_P2.54mm_Vertical +Through hole straight socket strip, 2x34, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x34 2.54mm double row +0 +68 +68 +Connector_PinSocket_2.54mm +PinSocket_2x34_P2.54mm_Vertical_SMD +surface-mounted straight socket strip, 2x34, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x34 2.54mm double row +0 +68 +68 +Connector_PinSocket_2.54mm +PinSocket_2x35_P2.54mm_Horizontal +Through hole angled socket strip, 2x35, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x35 2.54mm double row +0 +70 +70 +Connector_PinSocket_2.54mm +PinSocket_2x35_P2.54mm_Vertical +Through hole straight socket strip, 2x35, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x35 2.54mm double row +0 +70 +70 +Connector_PinSocket_2.54mm +PinSocket_2x35_P2.54mm_Vertical_SMD +surface-mounted straight socket strip, 2x35, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x35 2.54mm double row +0 +70 +70 +Connector_PinSocket_2.54mm +PinSocket_2x36_P2.54mm_Horizontal +Through hole angled socket strip, 2x36, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x36 2.54mm double row +0 +72 +72 +Connector_PinSocket_2.54mm +PinSocket_2x36_P2.54mm_Vertical +Through hole straight socket strip, 2x36, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x36 2.54mm double row +0 +72 +72 +Connector_PinSocket_2.54mm +PinSocket_2x36_P2.54mm_Vertical_SMD +surface-mounted straight socket strip, 2x36, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x36 2.54mm double row +0 +72 +72 +Connector_PinSocket_2.54mm +PinSocket_2x37_P2.54mm_Horizontal +Through hole angled socket strip, 2x37, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x37 2.54mm double row +0 +74 +74 +Connector_PinSocket_2.54mm +PinSocket_2x37_P2.54mm_Vertical +Through hole straight socket strip, 2x37, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x37 2.54mm double row +0 +74 +74 +Connector_PinSocket_2.54mm +PinSocket_2x37_P2.54mm_Vertical_SMD +surface-mounted straight socket strip, 2x37, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x37 2.54mm double row +0 +74 +74 +Connector_PinSocket_2.54mm +PinSocket_2x38_P2.54mm_Horizontal +Through hole angled socket strip, 2x38, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x38 2.54mm double row +0 +76 +76 +Connector_PinSocket_2.54mm +PinSocket_2x38_P2.54mm_Vertical +Through hole straight socket strip, 2x38, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x38 2.54mm double row +0 +76 +76 +Connector_PinSocket_2.54mm +PinSocket_2x38_P2.54mm_Vertical_SMD +surface-mounted straight socket strip, 2x38, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x38 2.54mm double row +0 +76 +76 +Connector_PinSocket_2.54mm +PinSocket_2x39_P2.54mm_Horizontal +Through hole angled socket strip, 2x39, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x39 2.54mm double row +0 +78 +78 +Connector_PinSocket_2.54mm +PinSocket_2x39_P2.54mm_Vertical +Through hole straight socket strip, 2x39, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x39 2.54mm double row +0 +78 +78 +Connector_PinSocket_2.54mm +PinSocket_2x39_P2.54mm_Vertical_SMD +surface-mounted straight socket strip, 2x39, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x39 2.54mm double row +0 +78 +78 +Connector_PinSocket_2.54mm +PinSocket_2x40_P2.54mm_Horizontal +Through hole angled socket strip, 2x40, 2.54mm pitch, 8.51mm socket length, double cols (from Kicad 4.0.7), script generated +Through hole angled socket strip THT 2x40 2.54mm double row +0 +80 +80 +Connector_PinSocket_2.54mm +PinSocket_2x40_P2.54mm_Vertical +Through hole straight socket strip, 2x40, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Through hole socket strip THT 2x40 2.54mm double row +0 +80 +80 +Connector_PinSocket_2.54mm +PinSocket_2x40_P2.54mm_Vertical_SMD +surface-mounted straight socket strip, 2x40, 2.54mm pitch, double cols (from Kicad 4.0.7), script generated +Surface mounted socket strip SMD 2x40 2.54mm double row +0 +80 +80 +Connector_RJ +RJ9_Evercom_5301-440xxx_Horizontal +Evercom 5301-4P4C RJ9 receptacle, unshielded, https://datasheet.lcsc.com/lcsc/2207051802_EVERCOM-5301-4P4C_C3097715.pdf +RJ9 Connector tab down +0 +4 +4 +Connector_RJ +RJ12_Amphenol_54601-x06_Horizontal +RJ12 6P6C horizontal socket, plastic body, tab down, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/c-bmj-0082.pdf +RJ12 connector +0 +6 +6 +Connector_RJ +RJ14_Connfly_DS1133-S4_Horizontal +RJ14 connector 6P4C Horizontal http://www.connfly.com/userfiles/image/UpLoadFile/File/2012/10/26/DS1133.pdf +RJ14 connector 6P4C Connfly DS1133 +0 +4 +4 +Connector_RJ +RJ25_Wayconn_MJEA-660X1_Horizontal +RJ25 6P6C Socket 90 degrees, https://wayconn.com/wp-content/themes/way/datasheet/MJEA-660X1XXX_RJ25_6P6C_PCB_RA.pdf +RJ12 RJ18 RJ25 jack connector 6P6C +0 +6 +6 +Connector_RJ +RJ45_Abracon_ARJP11A-MA_Horizontal +Shielded RJ45 ethernet connector with transformer and POE, https://abracon.com/Magnetics/lan/ARJP11A.PDF +ethernet 8p8c transformer poe rj45 +0 +15 +14 +Connector_RJ +RJ45_Amphenol_54602-x08_Horizontal +8 Pol Shallow Latch Connector, Modjack, RJ45 (https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/c-bmj-0102.pdf) +RJ45 +0 +8 +8 +Connector_RJ +RJ45_Amphenol_RJHSE538X +Shielded, 2 LED, https://www.amphenolcanada.com/ProductSearch/drawings/AC/RJHSE538X.pdf +RJ45 8p8c ethernet cat5 +0 +14 +13 +Connector_RJ +RJ45_Amphenol_RJHSE538X-02 +Shielded, 2 LED, 2 Ports, http://www.amphenolinfocom.eu/NavData/Drawings/RJHSE-538X-02-REVC.pdf +RJ45 8p8c dual ethernet cat5 +0 +26 +25 +Connector_RJ +RJ45_Amphenol_RJHSE538X-04 +Shielded, LEDs, 4 Ports, https://cdn.amphenol-cs.com/media/wysiwyg/files/drawing/rjhse538x04.pdf +RJ45 8p8c quad ethernet cat5 +0 +52 +49 +Connector_RJ +RJ45_Amphenol_RJHSE5380 +Shielded, https://www.amphenolcanada.com/ProductSearch/drawings/AC/RJHSE538X.pdf +RJ45 8p8c ethernet cat5 +0 +10 +9 +Connector_RJ +RJ45_Amphenol_RJHSE5380-08 +Shielded, https://www.amphenolcanada.com/ProductSearch/drawings/AC/RJHSE538X08.pdf +RJ45 8p8c ethernet cat5 +0 +68 +65 +Connector_RJ +RJ45_Amphenol_RJMG1BD3B8K1ANR +1 Port RJ45 Magjack Connector Through Hole 10/100 Base-T, AutoMDIX, https://www.amphenol-cs.com/media/wysiwyg/files/drawing/rjmg1bd3b8k1anr.pdf +RJ45 Magjack +0 +14 +13 +Connector_RJ +RJ45_BEL_SS74301-00x_Vertical +https://belfuse.com/resources/drawings/stewartconnector/dr-stw-ss-74301-001-ss-74301-002-ss-74301-005.pdf +RJ45 Vertical Shield LED Green Yellow +0 +14 +13 +Connector_RJ +RJ45_Bel_SI-60062-F +1 Port RJ45 Magjack Connector Through Hole 10/100 Base-T, AutoMDIX, https://belfuse.com/resources/drawings/magneticsolutions/dr-mag-si-60062-f.pdf +RJ45 Magjack +0 +14 +13 +Connector_RJ +RJ45_Bel_V895-1001-AW_Vertical +1 Port RJ45 Magjack Vertical Connector SMD 10/100 Base-T, https://www.belfuse.com/resources/drawings/magneticsolutions/dr-mag-v895-1001-aw.pdf +RJ45 Magjack +0 +14 +11 +Connector_RJ +RJ45_Cetus_J1B1211CCD_Horizontal +1 Port RJ45 Magjack Connector Through Hole 10/100 Base-T, Cetus, used and distributed by WIZnet (https://wizwiki.net/wiki/lib/exe/fetch.php?media=products:wiz550web:wiz550webds_kr:j1b1211ccd.pdf) +RJ45 Magjack +0 +14 +13 +Connector_RJ +RJ45_Connfly_DS1128-09-S8xx-S_Horizontal +1 Port RJ45 8p8c receptacle, shielded, through hole, 2 LEDs, tab up, http://en.connfly.group/static/upload/file//DS1128-09.pdf +RJ45 8p8c ethernet +0 +14 +13 +Connector_RJ +RJ45_HALO_HFJ11-x2450E-LxxRL_Horizontal +Halo FastJack, Shielded, 2 LEDs, https://www.haloelectronics.com/pdf/fastjack-100baset.pdf +10/100 Ethernet RJ45 Tab-Down +0 +14 +13 +Connector_RJ +RJ45_HALO_HFJ11-x2450ERL_Horizontal +Halo FastJack, Shielded, https://www.haloelectronics.com/pdf/fastjack-100baset.pdf +10/100 Ethernet RJ45 Tab-Down +0 +9 +8 +Connector_RJ +RJ45_HALO_HFJ11-x2450HRL_Horizontal +Halo FastJack, Shielded, https://www.haloelectronics.com/pdf/fastjack-100baset.pdf +10/100 Ethernet RJ45 Tab-Down +0 +10 +9 +Connector_RJ +RJ45_Hanrun_HR911105A_Horizontal +1 Port RJ45 8P8C receptacle, shielded, with magnetics, through hole, 2 LEDs, tab down, http://www.hanrun.com/public/upload/down/2020/09-11/cc11be56d66bb63d5f1eeb85492439c0.pdf +RJ45 Magjack ethernet +0 +14 +13 +Connector_RJ +RJ45_Kycon_G7LX-A88S7-BP-xx_Horizontal +10/100Base-T RJ45 ethernet magnetic transformer connector horizontal with green/yellow LEDs http://www.kycon.com/Pub_Eng_Draw/G7LX-A88S7-BP-GY.pdf +RJ45 ethernet magnetic +0 +16 +15 +Connector_RJ +RJ45_Molex_9346520x_Horizontal +1 Port RJ45 Magjack Connector Through Hole 10/100 Base-T, two LED, tab up +RJ45 Magjack +0 +14 +13 +Connector_RJ +RJ45_Molex_0855135013_Vertical +1 Port, RJ45, Series 85513, vertical, SMD, https://www.molex.com/pdm_docs/sd/855135013_sd.pdf +RJ45 Vertical +0 +9 +9 +Connector_RJ +RJ45_Ninigi_GE +1 port ethernet throughhole connector, https://en.ninigi.com/product/rj45ge/pdf +RJ45 ethernet 8p8c +0 +10 +9 +Connector_RJ +RJ45_OST_PJ012-8P8CX_Vertical +RJ45 vertical connector https://www.on-shore.com/wp-content/uploads/PJ012-8P8CX.pdf +RJ45 PJ012 +0 +8 +8 +Connector_RJ +RJ45_Plug_Metz_AJP92A8813 +plug, ethernet, 8P8C, RJ45 Plug +AJP92A8813 8P8C RJ45 ethernet plug +0 +8 +8 +Connector_RJ +RJ45_Pulse_JK00177NL_Horizontal +10/100/1000 Base-T RJ45 single port with LEDs and 75W POE, https://productfinder.pulseeng.com/doc_type/WEB301/doc_num/J432/doc_part/J432.pdf +RJ45 8p8c ethernet POE +0 +22 +21 +Connector_RJ +RJ45_Pulse_JK0654219NL_Horizontal +10/100/1000 Base-T RJ45 single port with LEDs https://media.digikey.com/pdf/Data%20Sheets/Pulse%20PDFs/JK%20Series.pdf#page=2 +RJ45 8p8c ethernet +0 +18 +17 +Connector_RJ +RJ45_Pulse_JXD6-0001NL_Horizontal +RJ45 ethernet transformer with magnetics (https://productfinder.pulseeng.com/doc_type/WEB301/doc_num/JXD6-0001NL/doc_part/JXD6-0001NL.pdf) +ethernet 8p8c transformer magjack +0 +12 +11 +Connector_RJ +RJ45_UDE_RB1-125B8G1A +1 Port RJ45 Connector Through Hole 10/100/1000 Base-T, https://datasheet.lcsc.com/szlcsc/1901091107_UDE-Corp-RB1-125B8G1A_C363353.pdf#page=3 +RJ45 ethernet +0 +16 +15 +Connector_RJ +RJ45_Wuerth_7499010001A_Horizontal +10/100Base-TX RJ45 ethernet magnetic transformer connector horizontal https://katalog.we-online.de/pbs/datasheet/7499010001A.pdf +RJ45 ethernet magnetic +0 +10 +9 +Connector_RJ +RJ45_Wuerth_7499010121A_Horizontal +10/100Base-TX RJ45 ethernet magnetic transformer connector horizontal with green/orange LEDs https://katalog.we-online.de/pbs/datasheet/7499010121A.pdf +RJ45 ethernet magnetic +0 +14 +13 +Connector_RJ +RJ45_Wuerth_7499111446_Horizontal +LAN-Transformer WE-RJ45LAN 10/100/1000 BaseT +ethernet lan connector +0 +16 +15 +Connector_RJ +RJ45_Wuerth_7499151120_Horizontal +Wuerth 7499151120, LAN-Transformer WE-RJ45LAN 10/100/1000 BaseT, Dual Ethernet Jack (http://katalog.we-online.de/pbs/datasheet/7499151120.pdf) +ethernet lan connector +0 +32 +29 +Connector_RJ +RJ45_Wuerth_74980111211_Horizontal +RJ45 LAN Transformer 10/100BaseT (https://katalog.we-online.de/pbs/datasheet/74980111211.pdf) +lan magnetics transformer +0 +14 +13 +Connector_SATA_SAS +SAS-mini_TEConnectivity_1888174_Vertical +36pin mini SAS connector, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=1888174&DocType=Customer+Drawing&DocLang=English +SAS mini connector +0 +44 +44 +Connector_SATA_SAS +SATA_Amphenol_10029364-001LF_Horizontal +https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/10029364.pdf +SATA +0 +24 +23 +Connector_Samtec +Samtec_FMC_ASP-134486-01_10x40_P1.27mm_Vertical +http://suddendocs.samtec.com/prints/asp-134486-01-mkt.pdf +FMC HPC +0 +400 +400 +Connector_Samtec +Samtec_FMC_ASP-134602-01_10x40_P1.27mm_Vertical +https://www.marutsu.co.jp/contents/shop/marutsu/ds/asp-134602-01.pdf +FMC HPC +0 +400 +400 +Connector_Samtec +Samtec_FMC_ASP-134604-01_4x40_Vertical +https://suddendocs.samtec.com/prints/asp-134604-01-mkt.pdf +FMC LPC VITA +0 +160 +160 +Connector_Samtec +Samtec_LSHM-105-xx.x-x-DV-N_2x05_P0.50mm_Vertical +Molex LSHM 0.50 mm Razor Beam High-Speed Hermaphroditic Terminal/Socket Strip, LSHM-105-xx.x-x-DV-N, 5 Pins per row (http://suddendocs.samtec.com/prints/lshm-1xx-xx.x-x-dv-a-x-x-tr-footprint.pdf), generated with kicad-footprint-generator +connector Samtec side entry +0 +10 +10 +Connector_Samtec +Samtec_LSHM-105-xx.x-x-DV-S_2x05-1SH_P0.50mm_Vertical +Molex LSHM 0.50 mm Razor Beam High-Speed Hermaphroditic Terminal/Socket Strip, LSHM-105-xx.x-x-DV-S, 5 Pins per row (http://suddendocs.samtec.com/prints/lshm-1xx-xx.x-x-dv-a-x-x-tr-footprint.pdf), generated with kicad-footprint-generator +connector Samtec side entry +0 +12 +11 +Connector_Samtec +Samtec_LSHM-110-xx.x-x-DV-N_2x10_P0.50mm_Vertical +Molex LSHM 0.50 mm Razor Beam High-Speed Hermaphroditic Terminal/Socket Strip, LSHM-110-xx.x-x-DV-N, 10 Pins per row (http://suddendocs.samtec.com/prints/lshm-1xx-xx.x-x-dv-a-x-x-tr-footprint.pdf), generated with kicad-footprint-generator +connector Samtec side entry +0 +20 +20 +Connector_Samtec +Samtec_LSHM-110-xx.x-x-DV-S_2x10-1SH_P0.50mm_Vertical +Molex LSHM 0.50 mm Razor Beam High-Speed Hermaphroditic Terminal/Socket Strip, LSHM-110-xx.x-x-DV-S, 10 Pins per row (http://suddendocs.samtec.com/prints/lshm-1xx-xx.x-x-dv-a-x-x-tr-footprint.pdf), generated with kicad-footprint-generator +connector Samtec side entry +0 +22 +21 +Connector_Samtec +Samtec_LSHM-120-xx.x-x-DV-N_2x20_P0.50mm_Vertical +Molex LSHM 0.50 mm Razor Beam High-Speed Hermaphroditic Terminal/Socket Strip, LSHM-120-xx.x-x-DV-N, 20 Pins per row (http://suddendocs.samtec.com/prints/lshm-1xx-xx.x-x-dv-a-x-x-tr-footprint.pdf), generated with kicad-footprint-generator +connector Samtec side entry +0 +40 +40 +Connector_Samtec +Samtec_LSHM-120-xx.x-x-DV-S_2x20-1SH_P0.50mm_Vertical +Molex LSHM 0.50 mm Razor Beam High-Speed Hermaphroditic Terminal/Socket Strip, LSHM-120-xx.x-x-DV-S, 20 Pins per row (http://suddendocs.samtec.com/prints/lshm-1xx-xx.x-x-dv-a-x-x-tr-footprint.pdf), generated with kicad-footprint-generator +connector Samtec side entry +0 +42 +41 +Connector_Samtec +Samtec_LSHM-130-xx.x-x-DV-N_2x30_P0.50mm_Vertical +Molex LSHM 0.50 mm Razor Beam High-Speed Hermaphroditic Terminal/Socket Strip, LSHM-130-xx.x-x-DV-N, 30 Pins per row (http://suddendocs.samtec.com/prints/lshm-1xx-xx.x-x-dv-a-x-x-tr-footprint.pdf), generated with kicad-footprint-generator +connector Samtec side entry +0 +60 +60 +Connector_Samtec +Samtec_LSHM-130-xx.x-x-DV-S_2x30-1SH_P0.50mm_Vertical +Molex LSHM 0.50 mm Razor Beam High-Speed Hermaphroditic Terminal/Socket Strip, LSHM-130-xx.x-x-DV-S, 30 Pins per row (http://suddendocs.samtec.com/prints/lshm-1xx-xx.x-x-dv-a-x-x-tr-footprint.pdf), generated with kicad-footprint-generator +connector Samtec side entry +0 +62 +61 +Connector_Samtec +Samtec_LSHM-140-xx.x-x-DV-N_2x40_P0.50mm_Vertical +Molex LSHM 0.50 mm Razor Beam High-Speed Hermaphroditic Terminal/Socket Strip, LSHM-140-xx.x-x-DV-N, 40 Pins per row (http://suddendocs.samtec.com/prints/lshm-1xx-xx.x-x-dv-a-x-x-tr-footprint.pdf), generated with kicad-footprint-generator +connector Samtec side entry +0 +80 +80 +Connector_Samtec +Samtec_LSHM-140-xx.x-x-DV-S_2x40-1SH_P0.50mm_Vertical +Molex LSHM 0.50 mm Razor Beam High-Speed Hermaphroditic Terminal/Socket Strip, LSHM-140-xx.x-x-DV-S, 40 Pins per row (http://suddendocs.samtec.com/prints/lshm-1xx-xx.x-x-dv-a-x-x-tr-footprint.pdf), generated with kicad-footprint-generator +connector Samtec side entry +0 +82 +81 +Connector_Samtec +Samtec_LSHM-150-xx.x-x-DV-N_2x50_P0.50mm_Vertical +Molex LSHM 0.50 mm Razor Beam High-Speed Hermaphroditic Terminal/Socket Strip, LSHM-150-xx.x-x-DV-N, 50 Pins per row (http://suddendocs.samtec.com/prints/lshm-1xx-xx.x-x-dv-a-x-x-tr-footprint.pdf), generated with kicad-footprint-generator +connector Samtec side entry +0 +100 +100 +Connector_Samtec +Samtec_LSHM-150-xx.x-x-DV-S_2x50-1SH_P0.50mm_Vertical +Molex LSHM 0.50 mm Razor Beam High-Speed Hermaphroditic Terminal/Socket Strip, LSHM-150-xx.x-x-DV-S, 50 Pins per row (http://suddendocs.samtec.com/prints/lshm-1xx-xx.x-x-dv-a-x-x-tr-footprint.pdf), generated with kicad-footprint-generator +connector Samtec side entry +0 +102 +101 +Connector_Samtec_HLE_SMD +Samtec_HLE-102-02-xxx-DV-BE-LC_2x02_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-102-02-xxx-DV-BE-LC, 2 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +4 +4 +Connector_Samtec_HLE_SMD +Samtec_HLE-102-02-xxx-DV-BE_2x02_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-102-02-xxx-DV-BE, 2 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +4 +4 +Connector_Samtec_HLE_SMD +Samtec_HLE-102-02-xxx-DV-LC_2x02_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-102-02-xxx-DV-LC, 2 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +4 +4 +Connector_Samtec_HLE_SMD +Samtec_HLE-102-02-xxx-DV_2x02_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-102-02-xxx-DV, 2 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +4 +4 +Connector_Samtec_HLE_SMD +Samtec_HLE-103-02-xxx-DV-BE-LC_2x03_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-103-02-xxx-DV-BE-LC, 3 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +6 +6 +Connector_Samtec_HLE_SMD +Samtec_HLE-103-02-xxx-DV-BE_2x03_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-103-02-xxx-DV-BE, 3 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +6 +6 +Connector_Samtec_HLE_SMD +Samtec_HLE-103-02-xxx-DV-LC_2x03_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-103-02-xxx-DV-LC, 3 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +6 +6 +Connector_Samtec_HLE_SMD +Samtec_HLE-103-02-xxx-DV_2x03_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-103-02-xxx-DV, 3 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +6 +6 +Connector_Samtec_HLE_SMD +Samtec_HLE-104-02-xxx-DV-A_2x04_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-104-02-xxx-DV-A, 4 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +8 +8 +Connector_Samtec_HLE_SMD +Samtec_HLE-104-02-xxx-DV-BE-A_2x04_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-104-02-xxx-DV-BE-A, 4 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +8 +8 +Connector_Samtec_HLE_SMD +Samtec_HLE-104-02-xxx-DV-BE-LC_2x04_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-104-02-xxx-DV-BE-LC, 4 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +8 +8 +Connector_Samtec_HLE_SMD +Samtec_HLE-104-02-xxx-DV-BE_2x04_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-104-02-xxx-DV-BE, 4 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +8 +8 +Connector_Samtec_HLE_SMD +Samtec_HLE-104-02-xxx-DV-LC_2x04_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-104-02-xxx-DV-LC, 4 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +8 +8 +Connector_Samtec_HLE_SMD +Samtec_HLE-104-02-xxx-DV_2x04_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-104-02-xxx-DV, 4 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +8 +8 +Connector_Samtec_HLE_SMD +Samtec_HLE-105-02-xxx-DV-A_2x05_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-105-02-xxx-DV-A, 5 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +10 +10 +Connector_Samtec_HLE_SMD +Samtec_HLE-105-02-xxx-DV-BE-A_2x05_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-105-02-xxx-DV-BE-A, 5 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +10 +10 +Connector_Samtec_HLE_SMD +Samtec_HLE-105-02-xxx-DV-BE-LC_2x05_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-105-02-xxx-DV-BE-LC, 5 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +10 +10 +Connector_Samtec_HLE_SMD +Samtec_HLE-105-02-xxx-DV-BE_2x05_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-105-02-xxx-DV-BE, 5 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +10 +10 +Connector_Samtec_HLE_SMD +Samtec_HLE-105-02-xxx-DV-LC_2x05_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-105-02-xxx-DV-LC, 5 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +10 +10 +Connector_Samtec_HLE_SMD +Samtec_HLE-105-02-xxx-DV_2x05_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-105-02-xxx-DV, 5 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +10 +10 +Connector_Samtec_HLE_SMD +Samtec_HLE-106-02-xxx-DV-A_2x06_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-106-02-xxx-DV-A, 6 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +12 +12 +Connector_Samtec_HLE_SMD +Samtec_HLE-106-02-xxx-DV-BE-A_2x06_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-106-02-xxx-DV-BE-A, 6 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +12 +12 +Connector_Samtec_HLE_SMD +Samtec_HLE-106-02-xxx-DV-BE-LC_2x06_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-106-02-xxx-DV-BE-LC, 6 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +12 +12 +Connector_Samtec_HLE_SMD +Samtec_HLE-106-02-xxx-DV-BE_2x06_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-106-02-xxx-DV-BE, 6 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +12 +12 +Connector_Samtec_HLE_SMD +Samtec_HLE-106-02-xxx-DV-LC_2x06_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-106-02-xxx-DV-LC, 6 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +12 +12 +Connector_Samtec_HLE_SMD +Samtec_HLE-106-02-xxx-DV_2x06_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-106-02-xxx-DV, 6 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +12 +12 +Connector_Samtec_HLE_SMD +Samtec_HLE-107-02-xxx-DV-A_2x07_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-107-02-xxx-DV-A, 7 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +14 +14 +Connector_Samtec_HLE_SMD +Samtec_HLE-107-02-xxx-DV-BE-A_2x07_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-107-02-xxx-DV-BE-A, 7 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +14 +14 +Connector_Samtec_HLE_SMD +Samtec_HLE-107-02-xxx-DV-BE-LC_2x07_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-107-02-xxx-DV-BE-LC, 7 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +14 +14 +Connector_Samtec_HLE_SMD +Samtec_HLE-107-02-xxx-DV-BE_2x07_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-107-02-xxx-DV-BE, 7 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +14 +14 +Connector_Samtec_HLE_SMD +Samtec_HLE-107-02-xxx-DV-LC_2x07_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-107-02-xxx-DV-LC, 7 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +14 +14 +Connector_Samtec_HLE_SMD +Samtec_HLE-107-02-xxx-DV_2x07_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-107-02-xxx-DV, 7 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +14 +14 +Connector_Samtec_HLE_SMD +Samtec_HLE-108-02-xxx-DV-A_2x08_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-108-02-xxx-DV-A, 8 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +16 +16 +Connector_Samtec_HLE_SMD +Samtec_HLE-108-02-xxx-DV-BE-A_2x08_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-108-02-xxx-DV-BE-A, 8 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +16 +16 +Connector_Samtec_HLE_SMD +Samtec_HLE-108-02-xxx-DV-BE-LC_2x08_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-108-02-xxx-DV-BE-LC, 8 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +16 +16 +Connector_Samtec_HLE_SMD +Samtec_HLE-108-02-xxx-DV-BE_2x08_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-108-02-xxx-DV-BE, 8 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +16 +16 +Connector_Samtec_HLE_SMD +Samtec_HLE-108-02-xxx-DV-LC_2x08_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-108-02-xxx-DV-LC, 8 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +16 +16 +Connector_Samtec_HLE_SMD +Samtec_HLE-108-02-xxx-DV_2x08_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-108-02-xxx-DV, 8 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +16 +16 +Connector_Samtec_HLE_SMD +Samtec_HLE-109-02-xxx-DV-A_2x09_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-109-02-xxx-DV-A, 9 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +18 +18 +Connector_Samtec_HLE_SMD +Samtec_HLE-109-02-xxx-DV-BE-A_2x09_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-109-02-xxx-DV-BE-A, 9 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +18 +18 +Connector_Samtec_HLE_SMD +Samtec_HLE-109-02-xxx-DV-BE-LC_2x09_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-109-02-xxx-DV-BE-LC, 9 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +18 +18 +Connector_Samtec_HLE_SMD +Samtec_HLE-109-02-xxx-DV-BE_2x09_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-109-02-xxx-DV-BE, 9 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +18 +18 +Connector_Samtec_HLE_SMD +Samtec_HLE-109-02-xxx-DV-LC_2x09_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-109-02-xxx-DV-LC, 9 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +18 +18 +Connector_Samtec_HLE_SMD +Samtec_HLE-109-02-xxx-DV_2x09_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-109-02-xxx-DV, 9 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +18 +18 +Connector_Samtec_HLE_SMD +Samtec_HLE-110-02-xxx-DV-A_2x10_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-110-02-xxx-DV-A, 10 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +20 +20 +Connector_Samtec_HLE_SMD +Samtec_HLE-110-02-xxx-DV-BE-A_2x10_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-110-02-xxx-DV-BE-A, 10 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +20 +20 +Connector_Samtec_HLE_SMD +Samtec_HLE-110-02-xxx-DV-BE-LC_2x10_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-110-02-xxx-DV-BE-LC, 10 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +20 +20 +Connector_Samtec_HLE_SMD +Samtec_HLE-110-02-xxx-DV-BE_2x10_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-110-02-xxx-DV-BE, 10 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +20 +20 +Connector_Samtec_HLE_SMD +Samtec_HLE-110-02-xxx-DV-LC_2x10_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-110-02-xxx-DV-LC, 10 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +20 +20 +Connector_Samtec_HLE_SMD +Samtec_HLE-110-02-xxx-DV_2x10_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-110-02-xxx-DV, 10 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +20 +20 +Connector_Samtec_HLE_SMD +Samtec_HLE-111-02-xxx-DV-A_2x11_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-111-02-xxx-DV-A, 11 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +22 +22 +Connector_Samtec_HLE_SMD +Samtec_HLE-111-02-xxx-DV-BE-A_2x11_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-111-02-xxx-DV-BE-A, 11 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +22 +22 +Connector_Samtec_HLE_SMD +Samtec_HLE-111-02-xxx-DV-BE-LC_2x11_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-111-02-xxx-DV-BE-LC, 11 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +22 +22 +Connector_Samtec_HLE_SMD +Samtec_HLE-111-02-xxx-DV-BE_2x11_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-111-02-xxx-DV-BE, 11 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +22 +22 +Connector_Samtec_HLE_SMD +Samtec_HLE-111-02-xxx-DV-LC_2x11_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-111-02-xxx-DV-LC, 11 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +22 +22 +Connector_Samtec_HLE_SMD +Samtec_HLE-111-02-xxx-DV_2x11_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-111-02-xxx-DV, 11 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +22 +22 +Connector_Samtec_HLE_SMD +Samtec_HLE-112-02-xxx-DV-A_2x12_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-112-02-xxx-DV-A, 12 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +24 +24 +Connector_Samtec_HLE_SMD +Samtec_HLE-112-02-xxx-DV-BE-A_2x12_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-112-02-xxx-DV-BE-A, 12 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +24 +24 +Connector_Samtec_HLE_SMD +Samtec_HLE-112-02-xxx-DV-BE-LC_2x12_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-112-02-xxx-DV-BE-LC, 12 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +24 +24 +Connector_Samtec_HLE_SMD +Samtec_HLE-112-02-xxx-DV-BE_2x12_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-112-02-xxx-DV-BE, 12 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +24 +24 +Connector_Samtec_HLE_SMD +Samtec_HLE-112-02-xxx-DV-LC_2x12_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-112-02-xxx-DV-LC, 12 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +24 +24 +Connector_Samtec_HLE_SMD +Samtec_HLE-112-02-xxx-DV_2x12_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-112-02-xxx-DV, 12 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +24 +24 +Connector_Samtec_HLE_SMD +Samtec_HLE-113-02-xxx-DV-A_2x13_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-113-02-xxx-DV-A, 13 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +26 +26 +Connector_Samtec_HLE_SMD +Samtec_HLE-113-02-xxx-DV-BE-A_2x13_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-113-02-xxx-DV-BE-A, 13 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +26 +26 +Connector_Samtec_HLE_SMD +Samtec_HLE-113-02-xxx-DV-BE-LC_2x13_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-113-02-xxx-DV-BE-LC, 13 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +26 +26 +Connector_Samtec_HLE_SMD +Samtec_HLE-113-02-xxx-DV-BE_2x13_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-113-02-xxx-DV-BE, 13 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +26 +26 +Connector_Samtec_HLE_SMD +Samtec_HLE-113-02-xxx-DV-LC_2x13_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-113-02-xxx-DV-LC, 13 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +26 +26 +Connector_Samtec_HLE_SMD +Samtec_HLE-113-02-xxx-DV_2x13_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-113-02-xxx-DV, 13 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +26 +26 +Connector_Samtec_HLE_SMD +Samtec_HLE-114-02-xxx-DV-A_2x14_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-114-02-xxx-DV-A, 14 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +28 +28 +Connector_Samtec_HLE_SMD +Samtec_HLE-114-02-xxx-DV-BE-A_2x14_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-114-02-xxx-DV-BE-A, 14 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +28 +28 +Connector_Samtec_HLE_SMD +Samtec_HLE-114-02-xxx-DV-BE-LC_2x14_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-114-02-xxx-DV-BE-LC, 14 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +28 +28 +Connector_Samtec_HLE_SMD +Samtec_HLE-114-02-xxx-DV-BE_2x14_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-114-02-xxx-DV-BE, 14 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +28 +28 +Connector_Samtec_HLE_SMD +Samtec_HLE-114-02-xxx-DV-LC_2x14_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-114-02-xxx-DV-LC, 14 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +28 +28 +Connector_Samtec_HLE_SMD +Samtec_HLE-114-02-xxx-DV_2x14_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-114-02-xxx-DV, 14 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +28 +28 +Connector_Samtec_HLE_SMD +Samtec_HLE-115-02-xxx-DV-A_2x15_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-115-02-xxx-DV-A, 15 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +30 +30 +Connector_Samtec_HLE_SMD +Samtec_HLE-115-02-xxx-DV-BE-A_2x15_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-115-02-xxx-DV-BE-A, 15 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +30 +30 +Connector_Samtec_HLE_SMD +Samtec_HLE-115-02-xxx-DV-BE-LC_2x15_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-115-02-xxx-DV-BE-LC, 15 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +30 +30 +Connector_Samtec_HLE_SMD +Samtec_HLE-115-02-xxx-DV-BE_2x15_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-115-02-xxx-DV-BE, 15 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +30 +30 +Connector_Samtec_HLE_SMD +Samtec_HLE-115-02-xxx-DV-LC_2x15_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-115-02-xxx-DV-LC, 15 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +30 +30 +Connector_Samtec_HLE_SMD +Samtec_HLE-115-02-xxx-DV_2x15_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-115-02-xxx-DV, 15 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +30 +30 +Connector_Samtec_HLE_SMD +Samtec_HLE-116-02-xxx-DV-A_2x16_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-116-02-xxx-DV-A, 16 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +32 +32 +Connector_Samtec_HLE_SMD +Samtec_HLE-116-02-xxx-DV-BE-A_2x16_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-116-02-xxx-DV-BE-A, 16 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +32 +32 +Connector_Samtec_HLE_SMD +Samtec_HLE-116-02-xxx-DV-BE-LC_2x16_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-116-02-xxx-DV-BE-LC, 16 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +32 +32 +Connector_Samtec_HLE_SMD +Samtec_HLE-116-02-xxx-DV-BE_2x16_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-116-02-xxx-DV-BE, 16 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +32 +32 +Connector_Samtec_HLE_SMD +Samtec_HLE-116-02-xxx-DV-LC_2x16_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-116-02-xxx-DV-LC, 16 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +32 +32 +Connector_Samtec_HLE_SMD +Samtec_HLE-116-02-xxx-DV_2x16_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-116-02-xxx-DV, 16 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +32 +32 +Connector_Samtec_HLE_SMD +Samtec_HLE-117-02-xxx-DV-A_2x17_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-117-02-xxx-DV-A, 17 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +34 +34 +Connector_Samtec_HLE_SMD +Samtec_HLE-117-02-xxx-DV-BE-A_2x17_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-117-02-xxx-DV-BE-A, 17 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +34 +34 +Connector_Samtec_HLE_SMD +Samtec_HLE-117-02-xxx-DV-BE-LC_2x17_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-117-02-xxx-DV-BE-LC, 17 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +34 +34 +Connector_Samtec_HLE_SMD +Samtec_HLE-117-02-xxx-DV-BE_2x17_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-117-02-xxx-DV-BE, 17 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +34 +34 +Connector_Samtec_HLE_SMD +Samtec_HLE-117-02-xxx-DV-LC_2x17_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-117-02-xxx-DV-LC, 17 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +34 +34 +Connector_Samtec_HLE_SMD +Samtec_HLE-117-02-xxx-DV_2x17_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-117-02-xxx-DV, 17 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +34 +34 +Connector_Samtec_HLE_SMD +Samtec_HLE-118-02-xxx-DV-A_2x18_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-118-02-xxx-DV-A, 18 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +36 +36 +Connector_Samtec_HLE_SMD +Samtec_HLE-118-02-xxx-DV-BE-A_2x18_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-118-02-xxx-DV-BE-A, 18 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +36 +36 +Connector_Samtec_HLE_SMD +Samtec_HLE-118-02-xxx-DV-BE-LC_2x18_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-118-02-xxx-DV-BE-LC, 18 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +36 +36 +Connector_Samtec_HLE_SMD +Samtec_HLE-118-02-xxx-DV-BE_2x18_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-118-02-xxx-DV-BE, 18 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +36 +36 +Connector_Samtec_HLE_SMD +Samtec_HLE-118-02-xxx-DV-LC_2x18_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-118-02-xxx-DV-LC, 18 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +36 +36 +Connector_Samtec_HLE_SMD +Samtec_HLE-118-02-xxx-DV_2x18_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-118-02-xxx-DV, 18 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +36 +36 +Connector_Samtec_HLE_SMD +Samtec_HLE-119-02-xxx-DV-A_2x19_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-119-02-xxx-DV-A, 19 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +38 +38 +Connector_Samtec_HLE_SMD +Samtec_HLE-119-02-xxx-DV-BE-A_2x19_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-119-02-xxx-DV-BE-A, 19 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +38 +38 +Connector_Samtec_HLE_SMD +Samtec_HLE-119-02-xxx-DV-BE-LC_2x19_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-119-02-xxx-DV-BE-LC, 19 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +38 +38 +Connector_Samtec_HLE_SMD +Samtec_HLE-119-02-xxx-DV-BE_2x19_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-119-02-xxx-DV-BE, 19 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +38 +38 +Connector_Samtec_HLE_SMD +Samtec_HLE-119-02-xxx-DV-LC_2x19_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-119-02-xxx-DV-LC, 19 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +38 +38 +Connector_Samtec_HLE_SMD +Samtec_HLE-119-02-xxx-DV_2x19_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-119-02-xxx-DV, 19 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +38 +38 +Connector_Samtec_HLE_SMD +Samtec_HLE-120-02-xxx-DV-A_2x20_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-120-02-xxx-DV-A, 20 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +40 +40 +Connector_Samtec_HLE_SMD +Samtec_HLE-120-02-xxx-DV-BE-A_2x20_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-120-02-xxx-DV-BE-A, 20 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +40 +40 +Connector_Samtec_HLE_SMD +Samtec_HLE-120-02-xxx-DV-BE-LC_2x20_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-120-02-xxx-DV-BE-LC, 20 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +40 +40 +Connector_Samtec_HLE_SMD +Samtec_HLE-120-02-xxx-DV-BE_2x20_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-120-02-xxx-DV-BE, 20 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +40 +40 +Connector_Samtec_HLE_SMD +Samtec_HLE-120-02-xxx-DV-LC_2x20_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-120-02-xxx-DV-LC, 20 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +40 +40 +Connector_Samtec_HLE_SMD +Samtec_HLE-120-02-xxx-DV_2x20_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-120-02-xxx-DV, 20 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +40 +40 +Connector_Samtec_HLE_SMD +Samtec_HLE-121-02-xxx-DV-A_2x21_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-121-02-xxx-DV-A, 21 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +42 +42 +Connector_Samtec_HLE_SMD +Samtec_HLE-121-02-xxx-DV-BE-A_2x21_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-121-02-xxx-DV-BE-A, 21 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +42 +42 +Connector_Samtec_HLE_SMD +Samtec_HLE-121-02-xxx-DV-BE-LC_2x21_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-121-02-xxx-DV-BE-LC, 21 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +42 +42 +Connector_Samtec_HLE_SMD +Samtec_HLE-121-02-xxx-DV-BE_2x21_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-121-02-xxx-DV-BE, 21 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +42 +42 +Connector_Samtec_HLE_SMD +Samtec_HLE-121-02-xxx-DV-LC_2x21_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-121-02-xxx-DV-LC, 21 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +42 +42 +Connector_Samtec_HLE_SMD +Samtec_HLE-121-02-xxx-DV_2x21_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-121-02-xxx-DV, 21 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +42 +42 +Connector_Samtec_HLE_SMD +Samtec_HLE-122-02-xxx-DV-A_2x22_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-122-02-xxx-DV-A, 22 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +44 +44 +Connector_Samtec_HLE_SMD +Samtec_HLE-122-02-xxx-DV-BE-A_2x22_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-122-02-xxx-DV-BE-A, 22 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +44 +44 +Connector_Samtec_HLE_SMD +Samtec_HLE-122-02-xxx-DV-BE-LC_2x22_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-122-02-xxx-DV-BE-LC, 22 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +44 +44 +Connector_Samtec_HLE_SMD +Samtec_HLE-122-02-xxx-DV-BE_2x22_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-122-02-xxx-DV-BE, 22 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +44 +44 +Connector_Samtec_HLE_SMD +Samtec_HLE-122-02-xxx-DV-LC_2x22_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-122-02-xxx-DV-LC, 22 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +44 +44 +Connector_Samtec_HLE_SMD +Samtec_HLE-122-02-xxx-DV_2x22_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-122-02-xxx-DV, 22 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +44 +44 +Connector_Samtec_HLE_SMD +Samtec_HLE-123-02-xxx-DV-A_2x23_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-123-02-xxx-DV-A, 23 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +46 +46 +Connector_Samtec_HLE_SMD +Samtec_HLE-123-02-xxx-DV-BE-A_2x23_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-123-02-xxx-DV-BE-A, 23 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +46 +46 +Connector_Samtec_HLE_SMD +Samtec_HLE-123-02-xxx-DV-BE-LC_2x23_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-123-02-xxx-DV-BE-LC, 23 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +46 +46 +Connector_Samtec_HLE_SMD +Samtec_HLE-123-02-xxx-DV-BE_2x23_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-123-02-xxx-DV-BE, 23 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +46 +46 +Connector_Samtec_HLE_SMD +Samtec_HLE-123-02-xxx-DV-LC_2x23_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-123-02-xxx-DV-LC, 23 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +46 +46 +Connector_Samtec_HLE_SMD +Samtec_HLE-123-02-xxx-DV_2x23_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-123-02-xxx-DV, 23 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +46 +46 +Connector_Samtec_HLE_SMD +Samtec_HLE-124-02-xxx-DV-A_2x24_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-124-02-xxx-DV-A, 24 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +48 +48 +Connector_Samtec_HLE_SMD +Samtec_HLE-124-02-xxx-DV-BE-A_2x24_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-124-02-xxx-DV-BE-A, 24 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +48 +48 +Connector_Samtec_HLE_SMD +Samtec_HLE-124-02-xxx-DV-BE-LC_2x24_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-124-02-xxx-DV-BE-LC, 24 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +48 +48 +Connector_Samtec_HLE_SMD +Samtec_HLE-124-02-xxx-DV-BE_2x24_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-124-02-xxx-DV-BE, 24 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +48 +48 +Connector_Samtec_HLE_SMD +Samtec_HLE-124-02-xxx-DV-LC_2x24_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-124-02-xxx-DV-LC, 24 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +48 +48 +Connector_Samtec_HLE_SMD +Samtec_HLE-124-02-xxx-DV_2x24_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-124-02-xxx-DV, 24 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +48 +48 +Connector_Samtec_HLE_SMD +Samtec_HLE-125-02-xxx-DV-A_2x25_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-125-02-xxx-DV-A, 25 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +50 +50 +Connector_Samtec_HLE_SMD +Samtec_HLE-125-02-xxx-DV-BE-A_2x25_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-125-02-xxx-DV-BE-A, 25 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +50 +50 +Connector_Samtec_HLE_SMD +Samtec_HLE-125-02-xxx-DV-BE-LC_2x25_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-125-02-xxx-DV-BE-LC, 25 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +50 +50 +Connector_Samtec_HLE_SMD +Samtec_HLE-125-02-xxx-DV-BE_2x25_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-125-02-xxx-DV-BE, 25 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +50 +50 +Connector_Samtec_HLE_SMD +Samtec_HLE-125-02-xxx-DV-LC_2x25_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-125-02-xxx-DV-LC, 25 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +50 +50 +Connector_Samtec_HLE_SMD +Samtec_HLE-125-02-xxx-DV_2x25_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-125-02-xxx-DV, 25 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +50 +50 +Connector_Samtec_HLE_SMD +Samtec_HLE-126-02-xxx-DV-A_2x26_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-126-02-xxx-DV-A, 26 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +52 +52 +Connector_Samtec_HLE_SMD +Samtec_HLE-126-02-xxx-DV-BE-A_2x26_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-126-02-xxx-DV-BE-A, 26 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +52 +52 +Connector_Samtec_HLE_SMD +Samtec_HLE-126-02-xxx-DV-BE-LC_2x26_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-126-02-xxx-DV-BE-LC, 26 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +52 +52 +Connector_Samtec_HLE_SMD +Samtec_HLE-126-02-xxx-DV-BE_2x26_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-126-02-xxx-DV-BE, 26 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +52 +52 +Connector_Samtec_HLE_SMD +Samtec_HLE-126-02-xxx-DV-LC_2x26_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-126-02-xxx-DV-LC, 26 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +52 +52 +Connector_Samtec_HLE_SMD +Samtec_HLE-126-02-xxx-DV_2x26_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-126-02-xxx-DV, 26 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +52 +52 +Connector_Samtec_HLE_SMD +Samtec_HLE-127-02-xxx-DV-A_2x27_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-127-02-xxx-DV-A, 27 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +54 +54 +Connector_Samtec_HLE_SMD +Samtec_HLE-127-02-xxx-DV-BE-A_2x27_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-127-02-xxx-DV-BE-A, 27 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +54 +54 +Connector_Samtec_HLE_SMD +Samtec_HLE-127-02-xxx-DV-BE-LC_2x27_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-127-02-xxx-DV-BE-LC, 27 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +54 +54 +Connector_Samtec_HLE_SMD +Samtec_HLE-127-02-xxx-DV-BE_2x27_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-127-02-xxx-DV-BE, 27 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +54 +54 +Connector_Samtec_HLE_SMD +Samtec_HLE-127-02-xxx-DV-LC_2x27_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-127-02-xxx-DV-LC, 27 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +54 +54 +Connector_Samtec_HLE_SMD +Samtec_HLE-127-02-xxx-DV_2x27_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-127-02-xxx-DV, 27 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +54 +54 +Connector_Samtec_HLE_SMD +Samtec_HLE-128-02-xxx-DV-A_2x28_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-128-02-xxx-DV-A, 28 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +56 +56 +Connector_Samtec_HLE_SMD +Samtec_HLE-128-02-xxx-DV-BE-A_2x28_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-128-02-xxx-DV-BE-A, 28 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +56 +56 +Connector_Samtec_HLE_SMD +Samtec_HLE-128-02-xxx-DV-BE-LC_2x28_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-128-02-xxx-DV-BE-LC, 28 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +56 +56 +Connector_Samtec_HLE_SMD +Samtec_HLE-128-02-xxx-DV-BE_2x28_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-128-02-xxx-DV-BE, 28 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +56 +56 +Connector_Samtec_HLE_SMD +Samtec_HLE-128-02-xxx-DV-LC_2x28_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-128-02-xxx-DV-LC, 28 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +56 +56 +Connector_Samtec_HLE_SMD +Samtec_HLE-128-02-xxx-DV_2x28_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-128-02-xxx-DV, 28 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +56 +56 +Connector_Samtec_HLE_SMD +Samtec_HLE-129-02-xxx-DV-A_2x29_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-129-02-xxx-DV-A, 29 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +58 +58 +Connector_Samtec_HLE_SMD +Samtec_HLE-129-02-xxx-DV-BE-A_2x29_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-129-02-xxx-DV-BE-A, 29 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +58 +58 +Connector_Samtec_HLE_SMD +Samtec_HLE-129-02-xxx-DV-BE-LC_2x29_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-129-02-xxx-DV-BE-LC, 29 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +58 +58 +Connector_Samtec_HLE_SMD +Samtec_HLE-129-02-xxx-DV-BE_2x29_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-129-02-xxx-DV-BE, 29 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +58 +58 +Connector_Samtec_HLE_SMD +Samtec_HLE-129-02-xxx-DV-LC_2x29_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-129-02-xxx-DV-LC, 29 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +58 +58 +Connector_Samtec_HLE_SMD +Samtec_HLE-129-02-xxx-DV_2x29_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-129-02-xxx-DV, 29 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +58 +58 +Connector_Samtec_HLE_SMD +Samtec_HLE-130-02-xxx-DV-A_2x30_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-130-02-xxx-DV-A, 30 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +60 +60 +Connector_Samtec_HLE_SMD +Samtec_HLE-130-02-xxx-DV-BE-A_2x30_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-130-02-xxx-DV-BE-A, 30 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +60 +60 +Connector_Samtec_HLE_SMD +Samtec_HLE-130-02-xxx-DV-BE-LC_2x30_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-130-02-xxx-DV-BE-LC, 30 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +60 +60 +Connector_Samtec_HLE_SMD +Samtec_HLE-130-02-xxx-DV-BE_2x30_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-130-02-xxx-DV-BE, 30 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +60 +60 +Connector_Samtec_HLE_SMD +Samtec_HLE-130-02-xxx-DV-LC_2x30_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-130-02-xxx-DV-LC, 30 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +60 +60 +Connector_Samtec_HLE_SMD +Samtec_HLE-130-02-xxx-DV_2x30_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-130-02-xxx-DV, 30 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +60 +60 +Connector_Samtec_HLE_SMD +Samtec_HLE-131-02-xxx-DV-A_2x31_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-131-02-xxx-DV-A, 31 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +62 +62 +Connector_Samtec_HLE_SMD +Samtec_HLE-131-02-xxx-DV-BE-A_2x31_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-131-02-xxx-DV-BE-A, 31 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +62 +62 +Connector_Samtec_HLE_SMD +Samtec_HLE-131-02-xxx-DV-BE-LC_2x31_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-131-02-xxx-DV-BE-LC, 31 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +62 +62 +Connector_Samtec_HLE_SMD +Samtec_HLE-131-02-xxx-DV-BE_2x31_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-131-02-xxx-DV-BE, 31 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +62 +62 +Connector_Samtec_HLE_SMD +Samtec_HLE-131-02-xxx-DV-LC_2x31_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-131-02-xxx-DV-LC, 31 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +62 +62 +Connector_Samtec_HLE_SMD +Samtec_HLE-131-02-xxx-DV_2x31_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-131-02-xxx-DV, 31 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +62 +62 +Connector_Samtec_HLE_SMD +Samtec_HLE-132-02-xxx-DV-A_2x32_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-132-02-xxx-DV-A, 32 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +64 +64 +Connector_Samtec_HLE_SMD +Samtec_HLE-132-02-xxx-DV-BE-A_2x32_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-132-02-xxx-DV-BE-A, 32 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +64 +64 +Connector_Samtec_HLE_SMD +Samtec_HLE-132-02-xxx-DV-BE-LC_2x32_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-132-02-xxx-DV-BE-LC, 32 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +64 +64 +Connector_Samtec_HLE_SMD +Samtec_HLE-132-02-xxx-DV-BE_2x32_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-132-02-xxx-DV-BE, 32 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +64 +64 +Connector_Samtec_HLE_SMD +Samtec_HLE-132-02-xxx-DV-LC_2x32_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-132-02-xxx-DV-LC, 32 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +64 +64 +Connector_Samtec_HLE_SMD +Samtec_HLE-132-02-xxx-DV_2x32_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-132-02-xxx-DV, 32 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +64 +64 +Connector_Samtec_HLE_SMD +Samtec_HLE-133-02-xxx-DV-A_2x33_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-133-02-xxx-DV-A, 33 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +66 +66 +Connector_Samtec_HLE_SMD +Samtec_HLE-133-02-xxx-DV-BE-A_2x33_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-133-02-xxx-DV-BE-A, 33 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +66 +66 +Connector_Samtec_HLE_SMD +Samtec_HLE-133-02-xxx-DV-BE-LC_2x33_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-133-02-xxx-DV-BE-LC, 33 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +66 +66 +Connector_Samtec_HLE_SMD +Samtec_HLE-133-02-xxx-DV-BE_2x33_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-133-02-xxx-DV-BE, 33 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +66 +66 +Connector_Samtec_HLE_SMD +Samtec_HLE-133-02-xxx-DV-LC_2x33_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-133-02-xxx-DV-LC, 33 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +66 +66 +Connector_Samtec_HLE_SMD +Samtec_HLE-133-02-xxx-DV_2x33_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-133-02-xxx-DV, 33 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +66 +66 +Connector_Samtec_HLE_SMD +Samtec_HLE-134-02-xxx-DV-A_2x34_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-134-02-xxx-DV-A, 34 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +68 +68 +Connector_Samtec_HLE_SMD +Samtec_HLE-134-02-xxx-DV-BE-A_2x34_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-134-02-xxx-DV-BE-A, 34 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +68 +68 +Connector_Samtec_HLE_SMD +Samtec_HLE-134-02-xxx-DV-BE-LC_2x34_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-134-02-xxx-DV-BE-LC, 34 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +68 +68 +Connector_Samtec_HLE_SMD +Samtec_HLE-134-02-xxx-DV-BE_2x34_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-134-02-xxx-DV-BE, 34 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +68 +68 +Connector_Samtec_HLE_SMD +Samtec_HLE-134-02-xxx-DV-LC_2x34_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-134-02-xxx-DV-LC, 34 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +68 +68 +Connector_Samtec_HLE_SMD +Samtec_HLE-134-02-xxx-DV_2x34_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-134-02-xxx-DV, 34 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +68 +68 +Connector_Samtec_HLE_SMD +Samtec_HLE-135-02-xxx-DV-A_2x35_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-135-02-xxx-DV-A, 35 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +70 +70 +Connector_Samtec_HLE_SMD +Samtec_HLE-135-02-xxx-DV-BE-A_2x35_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-135-02-xxx-DV-BE-A, 35 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +70 +70 +Connector_Samtec_HLE_SMD +Samtec_HLE-135-02-xxx-DV-BE-LC_2x35_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-135-02-xxx-DV-BE-LC, 35 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +70 +70 +Connector_Samtec_HLE_SMD +Samtec_HLE-135-02-xxx-DV-BE_2x35_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-135-02-xxx-DV-BE, 35 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +70 +70 +Connector_Samtec_HLE_SMD +Samtec_HLE-135-02-xxx-DV-LC_2x35_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-135-02-xxx-DV-LC, 35 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +70 +70 +Connector_Samtec_HLE_SMD +Samtec_HLE-135-02-xxx-DV_2x35_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-135-02-xxx-DV, 35 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +70 +70 +Connector_Samtec_HLE_SMD +Samtec_HLE-136-02-xxx-DV-A_2x36_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-136-02-xxx-DV-A, 36 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +72 +72 +Connector_Samtec_HLE_SMD +Samtec_HLE-136-02-xxx-DV-BE-A_2x36_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-136-02-xxx-DV-BE-A, 36 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +72 +72 +Connector_Samtec_HLE_SMD +Samtec_HLE-136-02-xxx-DV-BE-LC_2x36_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-136-02-xxx-DV-BE-LC, 36 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +72 +72 +Connector_Samtec_HLE_SMD +Samtec_HLE-136-02-xxx-DV-BE_2x36_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-136-02-xxx-DV-BE, 36 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +72 +72 +Connector_Samtec_HLE_SMD +Samtec_HLE-136-02-xxx-DV-LC_2x36_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-136-02-xxx-DV-LC, 36 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +72 +72 +Connector_Samtec_HLE_SMD +Samtec_HLE-136-02-xxx-DV_2x36_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-136-02-xxx-DV, 36 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +72 +72 +Connector_Samtec_HLE_SMD +Samtec_HLE-137-02-xxx-DV-A_2x37_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-137-02-xxx-DV-A, 37 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +74 +74 +Connector_Samtec_HLE_SMD +Samtec_HLE-137-02-xxx-DV-BE-A_2x37_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-137-02-xxx-DV-BE-A, 37 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +74 +74 +Connector_Samtec_HLE_SMD +Samtec_HLE-137-02-xxx-DV-BE-LC_2x37_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-137-02-xxx-DV-BE-LC, 37 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +74 +74 +Connector_Samtec_HLE_SMD +Samtec_HLE-137-02-xxx-DV-BE_2x37_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-137-02-xxx-DV-BE, 37 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +74 +74 +Connector_Samtec_HLE_SMD +Samtec_HLE-137-02-xxx-DV-LC_2x37_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-137-02-xxx-DV-LC, 37 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +74 +74 +Connector_Samtec_HLE_SMD +Samtec_HLE-137-02-xxx-DV_2x37_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-137-02-xxx-DV, 37 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +74 +74 +Connector_Samtec_HLE_SMD +Samtec_HLE-138-02-xxx-DV-A_2x38_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-138-02-xxx-DV-A, 38 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +76 +76 +Connector_Samtec_HLE_SMD +Samtec_HLE-138-02-xxx-DV-BE-A_2x38_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-138-02-xxx-DV-BE-A, 38 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +76 +76 +Connector_Samtec_HLE_SMD +Samtec_HLE-138-02-xxx-DV-BE-LC_2x38_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-138-02-xxx-DV-BE-LC, 38 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +76 +76 +Connector_Samtec_HLE_SMD +Samtec_HLE-138-02-xxx-DV-BE_2x38_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-138-02-xxx-DV-BE, 38 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +76 +76 +Connector_Samtec_HLE_SMD +Samtec_HLE-138-02-xxx-DV-LC_2x38_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-138-02-xxx-DV-LC, 38 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +76 +76 +Connector_Samtec_HLE_SMD +Samtec_HLE-138-02-xxx-DV_2x38_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-138-02-xxx-DV, 38 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +76 +76 +Connector_Samtec_HLE_SMD +Samtec_HLE-139-02-xxx-DV-A_2x39_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-139-02-xxx-DV-A, 39 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +78 +78 +Connector_Samtec_HLE_SMD +Samtec_HLE-139-02-xxx-DV-BE-A_2x39_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-139-02-xxx-DV-BE-A, 39 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +78 +78 +Connector_Samtec_HLE_SMD +Samtec_HLE-139-02-xxx-DV-BE-LC_2x39_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-139-02-xxx-DV-BE-LC, 39 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +78 +78 +Connector_Samtec_HLE_SMD +Samtec_HLE-139-02-xxx-DV-BE_2x39_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-139-02-xxx-DV-BE, 39 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +78 +78 +Connector_Samtec_HLE_SMD +Samtec_HLE-139-02-xxx-DV-LC_2x39_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-139-02-xxx-DV-LC, 39 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +78 +78 +Connector_Samtec_HLE_SMD +Samtec_HLE-139-02-xxx-DV_2x39_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-139-02-xxx-DV, 39 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +78 +78 +Connector_Samtec_HLE_SMD +Samtec_HLE-140-02-xxx-DV-A_2x40_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-140-02-xxx-DV-A, 40 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +80 +80 +Connector_Samtec_HLE_SMD +Samtec_HLE-140-02-xxx-DV-BE-A_2x40_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-140-02-xxx-DV-BE-A, 40 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +80 +80 +Connector_Samtec_HLE_SMD +Samtec_HLE-140-02-xxx-DV-BE-LC_2x40_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-140-02-xxx-DV-BE-LC, 40 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +80 +80 +Connector_Samtec_HLE_SMD +Samtec_HLE-140-02-xxx-DV-BE_2x40_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-140-02-xxx-DV-BE, 40 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +80 +80 +Connector_Samtec_HLE_SMD +Samtec_HLE-140-02-xxx-DV-LC_2x40_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-140-02-xxx-DV-LC, 40 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +80 +80 +Connector_Samtec_HLE_SMD +Samtec_HLE-140-02-xxx-DV_2x40_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-140-02-xxx-DV, 40 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +80 +80 +Connector_Samtec_HLE_SMD +Samtec_HLE-141-02-xxx-DV-A_2x41_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-141-02-xxx-DV-A, 41 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +82 +82 +Connector_Samtec_HLE_SMD +Samtec_HLE-141-02-xxx-DV-BE-A_2x41_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-141-02-xxx-DV-BE-A, 41 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +82 +82 +Connector_Samtec_HLE_SMD +Samtec_HLE-141-02-xxx-DV-BE-LC_2x41_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-141-02-xxx-DV-BE-LC, 41 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +82 +82 +Connector_Samtec_HLE_SMD +Samtec_HLE-141-02-xxx-DV-BE_2x41_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-141-02-xxx-DV-BE, 41 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +82 +82 +Connector_Samtec_HLE_SMD +Samtec_HLE-141-02-xxx-DV-LC_2x41_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-141-02-xxx-DV-LC, 41 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +82 +82 +Connector_Samtec_HLE_SMD +Samtec_HLE-141-02-xxx-DV_2x41_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-141-02-xxx-DV, 41 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +82 +82 +Connector_Samtec_HLE_SMD +Samtec_HLE-142-02-xxx-DV-A_2x42_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-142-02-xxx-DV-A, 42 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +84 +84 +Connector_Samtec_HLE_SMD +Samtec_HLE-142-02-xxx-DV-BE-A_2x42_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-142-02-xxx-DV-BE-A, 42 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +84 +84 +Connector_Samtec_HLE_SMD +Samtec_HLE-142-02-xxx-DV-BE-LC_2x42_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-142-02-xxx-DV-BE-LC, 42 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +84 +84 +Connector_Samtec_HLE_SMD +Samtec_HLE-142-02-xxx-DV-BE_2x42_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-142-02-xxx-DV-BE, 42 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +84 +84 +Connector_Samtec_HLE_SMD +Samtec_HLE-142-02-xxx-DV-LC_2x42_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-142-02-xxx-DV-LC, 42 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +84 +84 +Connector_Samtec_HLE_SMD +Samtec_HLE-142-02-xxx-DV_2x42_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-142-02-xxx-DV, 42 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +84 +84 +Connector_Samtec_HLE_SMD +Samtec_HLE-143-02-xxx-DV-A_2x43_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-143-02-xxx-DV-A, 43 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +86 +86 +Connector_Samtec_HLE_SMD +Samtec_HLE-143-02-xxx-DV-BE-A_2x43_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-143-02-xxx-DV-BE-A, 43 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +86 +86 +Connector_Samtec_HLE_SMD +Samtec_HLE-143-02-xxx-DV-BE-LC_2x43_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-143-02-xxx-DV-BE-LC, 43 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +86 +86 +Connector_Samtec_HLE_SMD +Samtec_HLE-143-02-xxx-DV-BE_2x43_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-143-02-xxx-DV-BE, 43 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +86 +86 +Connector_Samtec_HLE_SMD +Samtec_HLE-143-02-xxx-DV-LC_2x43_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-143-02-xxx-DV-LC, 43 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +86 +86 +Connector_Samtec_HLE_SMD +Samtec_HLE-143-02-xxx-DV_2x43_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-143-02-xxx-DV, 43 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +86 +86 +Connector_Samtec_HLE_SMD +Samtec_HLE-144-02-xxx-DV-A_2x44_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-144-02-xxx-DV-A, 44 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +88 +88 +Connector_Samtec_HLE_SMD +Samtec_HLE-144-02-xxx-DV-BE-A_2x44_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-144-02-xxx-DV-BE-A, 44 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +88 +88 +Connector_Samtec_HLE_SMD +Samtec_HLE-144-02-xxx-DV-BE-LC_2x44_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-144-02-xxx-DV-BE-LC, 44 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +88 +88 +Connector_Samtec_HLE_SMD +Samtec_HLE-144-02-xxx-DV-BE_2x44_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-144-02-xxx-DV-BE, 44 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +88 +88 +Connector_Samtec_HLE_SMD +Samtec_HLE-144-02-xxx-DV-LC_2x44_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-144-02-xxx-DV-LC, 44 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +88 +88 +Connector_Samtec_HLE_SMD +Samtec_HLE-144-02-xxx-DV_2x44_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-144-02-xxx-DV, 44 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +88 +88 +Connector_Samtec_HLE_SMD +Samtec_HLE-145-02-xxx-DV-A_2x45_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-145-02-xxx-DV-A, 45 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +90 +90 +Connector_Samtec_HLE_SMD +Samtec_HLE-145-02-xxx-DV-BE-A_2x45_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-145-02-xxx-DV-BE-A, 45 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +90 +90 +Connector_Samtec_HLE_SMD +Samtec_HLE-145-02-xxx-DV-BE-LC_2x45_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-145-02-xxx-DV-BE-LC, 45 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +90 +90 +Connector_Samtec_HLE_SMD +Samtec_HLE-145-02-xxx-DV-BE_2x45_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-145-02-xxx-DV-BE, 45 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +90 +90 +Connector_Samtec_HLE_SMD +Samtec_HLE-145-02-xxx-DV-LC_2x45_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-145-02-xxx-DV-LC, 45 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +90 +90 +Connector_Samtec_HLE_SMD +Samtec_HLE-145-02-xxx-DV_2x45_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-145-02-xxx-DV, 45 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +90 +90 +Connector_Samtec_HLE_SMD +Samtec_HLE-146-02-xxx-DV-A_2x46_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-146-02-xxx-DV-A, 46 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +92 +92 +Connector_Samtec_HLE_SMD +Samtec_HLE-146-02-xxx-DV-BE-A_2x46_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-146-02-xxx-DV-BE-A, 46 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +92 +92 +Connector_Samtec_HLE_SMD +Samtec_HLE-146-02-xxx-DV-BE-LC_2x46_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-146-02-xxx-DV-BE-LC, 46 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +92 +92 +Connector_Samtec_HLE_SMD +Samtec_HLE-146-02-xxx-DV-BE_2x46_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-146-02-xxx-DV-BE, 46 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +92 +92 +Connector_Samtec_HLE_SMD +Samtec_HLE-146-02-xxx-DV-LC_2x46_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-146-02-xxx-DV-LC, 46 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +92 +92 +Connector_Samtec_HLE_SMD +Samtec_HLE-146-02-xxx-DV_2x46_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-146-02-xxx-DV, 46 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +92 +92 +Connector_Samtec_HLE_SMD +Samtec_HLE-147-02-xxx-DV-A_2x47_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-147-02-xxx-DV-A, 47 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +94 +94 +Connector_Samtec_HLE_SMD +Samtec_HLE-147-02-xxx-DV-BE-A_2x47_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-147-02-xxx-DV-BE-A, 47 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +94 +94 +Connector_Samtec_HLE_SMD +Samtec_HLE-147-02-xxx-DV-BE-LC_2x47_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-147-02-xxx-DV-BE-LC, 47 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +94 +94 +Connector_Samtec_HLE_SMD +Samtec_HLE-147-02-xxx-DV-BE_2x47_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-147-02-xxx-DV-BE, 47 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +94 +94 +Connector_Samtec_HLE_SMD +Samtec_HLE-147-02-xxx-DV-LC_2x47_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-147-02-xxx-DV-LC, 47 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +94 +94 +Connector_Samtec_HLE_SMD +Samtec_HLE-147-02-xxx-DV_2x47_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-147-02-xxx-DV, 47 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +94 +94 +Connector_Samtec_HLE_SMD +Samtec_HLE-148-02-xxx-DV-A_2x48_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-148-02-xxx-DV-A, 48 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +96 +96 +Connector_Samtec_HLE_SMD +Samtec_HLE-148-02-xxx-DV-BE-A_2x48_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-148-02-xxx-DV-BE-A, 48 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +96 +96 +Connector_Samtec_HLE_SMD +Samtec_HLE-148-02-xxx-DV-BE-LC_2x48_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-148-02-xxx-DV-BE-LC, 48 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +96 +96 +Connector_Samtec_HLE_SMD +Samtec_HLE-148-02-xxx-DV-BE_2x48_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-148-02-xxx-DV-BE, 48 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +96 +96 +Connector_Samtec_HLE_SMD +Samtec_HLE-148-02-xxx-DV-LC_2x48_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-148-02-xxx-DV-LC, 48 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +96 +96 +Connector_Samtec_HLE_SMD +Samtec_HLE-148-02-xxx-DV_2x48_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-148-02-xxx-DV, 48 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +96 +96 +Connector_Samtec_HLE_SMD +Samtec_HLE-149-02-xxx-DV-A_2x49_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-149-02-xxx-DV-A, 49 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +98 +98 +Connector_Samtec_HLE_SMD +Samtec_HLE-149-02-xxx-DV-BE-A_2x49_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-149-02-xxx-DV-BE-A, 49 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +98 +98 +Connector_Samtec_HLE_SMD +Samtec_HLE-149-02-xxx-DV-BE-LC_2x49_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-149-02-xxx-DV-BE-LC, 49 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +98 +98 +Connector_Samtec_HLE_SMD +Samtec_HLE-149-02-xxx-DV-BE_2x49_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-149-02-xxx-DV-BE, 49 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +98 +98 +Connector_Samtec_HLE_SMD +Samtec_HLE-149-02-xxx-DV-LC_2x49_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-149-02-xxx-DV-LC, 49 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +98 +98 +Connector_Samtec_HLE_SMD +Samtec_HLE-149-02-xxx-DV_2x49_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-149-02-xxx-DV, 49 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +98 +98 +Connector_Samtec_HLE_SMD +Samtec_HLE-150-02-xxx-DV-A_2x50_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-150-02-xxx-DV-A, 50 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +100 +100 +Connector_Samtec_HLE_SMD +Samtec_HLE-150-02-xxx-DV-BE-A_2x50_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-150-02-xxx-DV-BE-A, 50 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +100 +100 +Connector_Samtec_HLE_SMD +Samtec_HLE-150-02-xxx-DV-BE-LC_2x50_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-150-02-xxx-DV-BE-LC, 50 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +100 +100 +Connector_Samtec_HLE_SMD +Samtec_HLE-150-02-xxx-DV-BE_2x50_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-150-02-xxx-DV-BE, 50 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +100 +100 +Connector_Samtec_HLE_SMD +Samtec_HLE-150-02-xxx-DV-LC_2x50_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-150-02-xxx-DV-LC, 50 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +100 +100 +Connector_Samtec_HLE_SMD +Samtec_HLE-150-02-xxx-DV_2x50_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-150-02-xxx-DV, 50 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator +connector Samtec HLE horizontal +0 +100 +100 +Connector_Samtec_HLE_THT +Samtec_HLE-104-02-xx-DV-PE-LC_2x04_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-104-02-xx-DV-PE-LC, 4 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +8 +8 +Connector_Samtec_HLE_THT +Samtec_HLE-104-02-xx-DV-PE_2x04_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-104-02-xx-DV-PE (compatible alternatives: HLE-104-02-xx-DV-PE-BE), 4 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +8 +8 +Connector_Samtec_HLE_THT +Samtec_HLE-104-02-xx-DV-TE_2x04_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-104-02-xx-DV-TE, 4 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +8 +8 +Connector_Samtec_HLE_THT +Samtec_HLE-105-02-xx-DV-PE-LC_2x05_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-105-02-xx-DV-PE-LC, 5 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +10 +10 +Connector_Samtec_HLE_THT +Samtec_HLE-105-02-xx-DV-PE_2x05_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-105-02-xx-DV-PE (compatible alternatives: HLE-105-02-xx-DV-PE-BE), 5 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +10 +10 +Connector_Samtec_HLE_THT +Samtec_HLE-105-02-xx-DV-TE_2x05_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-105-02-xx-DV-TE, 5 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +10 +10 +Connector_Samtec_HLE_THT +Samtec_HLE-106-02-xx-DV-PE-LC_2x06_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-106-02-xx-DV-PE-LC, 6 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +12 +12 +Connector_Samtec_HLE_THT +Samtec_HLE-106-02-xx-DV-PE_2x06_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-106-02-xx-DV-PE (compatible alternatives: HLE-106-02-xx-DV-PE-BE), 6 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +12 +12 +Connector_Samtec_HLE_THT +Samtec_HLE-106-02-xx-DV-TE_2x06_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-106-02-xx-DV-TE, 6 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +12 +12 +Connector_Samtec_HLE_THT +Samtec_HLE-107-02-xx-DV-PE-LC_2x07_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-107-02-xx-DV-PE-LC, 7 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +14 +14 +Connector_Samtec_HLE_THT +Samtec_HLE-107-02-xx-DV-PE_2x07_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-107-02-xx-DV-PE (compatible alternatives: HLE-107-02-xx-DV-PE-BE), 7 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +14 +14 +Connector_Samtec_HLE_THT +Samtec_HLE-107-02-xx-DV-TE_2x07_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-107-02-xx-DV-TE, 7 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +14 +14 +Connector_Samtec_HLE_THT +Samtec_HLE-108-02-xx-DV-PE-LC_2x08_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-108-02-xx-DV-PE-LC, 8 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +16 +16 +Connector_Samtec_HLE_THT +Samtec_HLE-108-02-xx-DV-PE_2x08_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-108-02-xx-DV-PE (compatible alternatives: HLE-108-02-xx-DV-PE-BE), 8 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +16 +16 +Connector_Samtec_HLE_THT +Samtec_HLE-108-02-xx-DV-TE_2x08_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-108-02-xx-DV-TE, 8 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +16 +16 +Connector_Samtec_HLE_THT +Samtec_HLE-109-02-xx-DV-PE-LC_2x09_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-109-02-xx-DV-PE-LC, 9 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +18 +18 +Connector_Samtec_HLE_THT +Samtec_HLE-109-02-xx-DV-PE_2x09_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-109-02-xx-DV-PE (compatible alternatives: HLE-109-02-xx-DV-PE-BE), 9 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +18 +18 +Connector_Samtec_HLE_THT +Samtec_HLE-109-02-xx-DV-TE_2x09_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-109-02-xx-DV-TE, 9 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +18 +18 +Connector_Samtec_HLE_THT +Samtec_HLE-110-02-xx-DV-PE-LC_2x10_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-110-02-xx-DV-PE-LC, 10 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +20 +20 +Connector_Samtec_HLE_THT +Samtec_HLE-110-02-xx-DV-PE_2x10_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-110-02-xx-DV-PE (compatible alternatives: HLE-110-02-xx-DV-PE-BE), 10 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +20 +20 +Connector_Samtec_HLE_THT +Samtec_HLE-110-02-xx-DV-TE_2x10_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-110-02-xx-DV-TE, 10 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +20 +20 +Connector_Samtec_HLE_THT +Samtec_HLE-111-02-xx-DV-PE-LC_2x11_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-111-02-xx-DV-PE-LC, 11 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +22 +22 +Connector_Samtec_HLE_THT +Samtec_HLE-111-02-xx-DV-PE_2x11_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-111-02-xx-DV-PE (compatible alternatives: HLE-111-02-xx-DV-PE-BE), 11 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +22 +22 +Connector_Samtec_HLE_THT +Samtec_HLE-111-02-xx-DV-TE_2x11_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-111-02-xx-DV-TE, 11 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +22 +22 +Connector_Samtec_HLE_THT +Samtec_HLE-112-02-xx-DV-PE-LC_2x12_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-112-02-xx-DV-PE-LC, 12 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +24 +24 +Connector_Samtec_HLE_THT +Samtec_HLE-112-02-xx-DV-PE_2x12_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-112-02-xx-DV-PE (compatible alternatives: HLE-112-02-xx-DV-PE-BE), 12 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +24 +24 +Connector_Samtec_HLE_THT +Samtec_HLE-112-02-xx-DV-TE_2x12_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-112-02-xx-DV-TE, 12 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +24 +24 +Connector_Samtec_HLE_THT +Samtec_HLE-113-02-xx-DV-PE-LC_2x13_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-113-02-xx-DV-PE-LC, 13 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +26 +26 +Connector_Samtec_HLE_THT +Samtec_HLE-113-02-xx-DV-PE_2x13_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-113-02-xx-DV-PE (compatible alternatives: HLE-113-02-xx-DV-PE-BE), 13 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +26 +26 +Connector_Samtec_HLE_THT +Samtec_HLE-113-02-xx-DV-TE_2x13_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-113-02-xx-DV-TE, 13 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +26 +26 +Connector_Samtec_HLE_THT +Samtec_HLE-114-02-xx-DV-PE-LC_2x14_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-114-02-xx-DV-PE-LC, 14 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +28 +28 +Connector_Samtec_HLE_THT +Samtec_HLE-114-02-xx-DV-PE_2x14_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-114-02-xx-DV-PE (compatible alternatives: HLE-114-02-xx-DV-PE-BE), 14 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +28 +28 +Connector_Samtec_HLE_THT +Samtec_HLE-114-02-xx-DV-TE_2x14_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-114-02-xx-DV-TE, 14 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +28 +28 +Connector_Samtec_HLE_THT +Samtec_HLE-115-02-xx-DV-PE-LC_2x15_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-115-02-xx-DV-PE-LC, 15 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +30 +30 +Connector_Samtec_HLE_THT +Samtec_HLE-115-02-xx-DV-PE_2x15_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-115-02-xx-DV-PE (compatible alternatives: HLE-115-02-xx-DV-PE-BE), 15 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +30 +30 +Connector_Samtec_HLE_THT +Samtec_HLE-115-02-xx-DV-TE_2x15_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-115-02-xx-DV-TE, 15 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +30 +30 +Connector_Samtec_HLE_THT +Samtec_HLE-116-02-xx-DV-PE-LC_2x16_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-116-02-xx-DV-PE-LC, 16 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +32 +32 +Connector_Samtec_HLE_THT +Samtec_HLE-116-02-xx-DV-PE_2x16_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-116-02-xx-DV-PE (compatible alternatives: HLE-116-02-xx-DV-PE-BE), 16 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +32 +32 +Connector_Samtec_HLE_THT +Samtec_HLE-116-02-xx-DV-TE_2x16_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-116-02-xx-DV-TE, 16 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +32 +32 +Connector_Samtec_HLE_THT +Samtec_HLE-117-02-xx-DV-PE-LC_2x17_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-117-02-xx-DV-PE-LC, 17 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +34 +34 +Connector_Samtec_HLE_THT +Samtec_HLE-117-02-xx-DV-PE_2x17_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-117-02-xx-DV-PE (compatible alternatives: HLE-117-02-xx-DV-PE-BE), 17 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +34 +34 +Connector_Samtec_HLE_THT +Samtec_HLE-117-02-xx-DV-TE_2x17_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-117-02-xx-DV-TE, 17 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +34 +34 +Connector_Samtec_HLE_THT +Samtec_HLE-118-02-xx-DV-PE-LC_2x18_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-118-02-xx-DV-PE-LC, 18 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +36 +36 +Connector_Samtec_HLE_THT +Samtec_HLE-118-02-xx-DV-PE_2x18_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-118-02-xx-DV-PE (compatible alternatives: HLE-118-02-xx-DV-PE-BE), 18 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +36 +36 +Connector_Samtec_HLE_THT +Samtec_HLE-118-02-xx-DV-TE_2x18_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-118-02-xx-DV-TE, 18 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +36 +36 +Connector_Samtec_HLE_THT +Samtec_HLE-119-02-xx-DV-PE-LC_2x19_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-119-02-xx-DV-PE-LC, 19 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +38 +38 +Connector_Samtec_HLE_THT +Samtec_HLE-119-02-xx-DV-PE_2x19_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-119-02-xx-DV-PE (compatible alternatives: HLE-119-02-xx-DV-PE-BE), 19 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +38 +38 +Connector_Samtec_HLE_THT +Samtec_HLE-119-02-xx-DV-TE_2x19_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-119-02-xx-DV-TE, 19 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +38 +38 +Connector_Samtec_HLE_THT +Samtec_HLE-120-02-xx-DV-PE-LC_2x20_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-120-02-xx-DV-PE-LC, 20 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +40 +40 +Connector_Samtec_HLE_THT +Samtec_HLE-120-02-xx-DV-PE_2x20_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-120-02-xx-DV-PE (compatible alternatives: HLE-120-02-xx-DV-PE-BE), 20 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +40 +40 +Connector_Samtec_HLE_THT +Samtec_HLE-120-02-xx-DV-TE_2x20_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-120-02-xx-DV-TE, 20 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +40 +40 +Connector_Samtec_HLE_THT +Samtec_HLE-121-02-xx-DV-PE-LC_2x21_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-121-02-xx-DV-PE-LC, 21 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +42 +42 +Connector_Samtec_HLE_THT +Samtec_HLE-121-02-xx-DV-PE_2x21_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-121-02-xx-DV-PE (compatible alternatives: HLE-121-02-xx-DV-PE-BE), 21 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +42 +42 +Connector_Samtec_HLE_THT +Samtec_HLE-121-02-xx-DV-TE_2x21_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-121-02-xx-DV-TE, 21 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +42 +42 +Connector_Samtec_HLE_THT +Samtec_HLE-122-02-xx-DV-PE-LC_2x22_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-122-02-xx-DV-PE-LC, 22 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +44 +44 +Connector_Samtec_HLE_THT +Samtec_HLE-122-02-xx-DV-PE_2x22_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-122-02-xx-DV-PE (compatible alternatives: HLE-122-02-xx-DV-PE-BE), 22 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +44 +44 +Connector_Samtec_HLE_THT +Samtec_HLE-122-02-xx-DV-TE_2x22_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-122-02-xx-DV-TE, 22 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +44 +44 +Connector_Samtec_HLE_THT +Samtec_HLE-123-02-xx-DV-PE-LC_2x23_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-123-02-xx-DV-PE-LC, 23 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +46 +46 +Connector_Samtec_HLE_THT +Samtec_HLE-123-02-xx-DV-PE_2x23_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-123-02-xx-DV-PE (compatible alternatives: HLE-123-02-xx-DV-PE-BE), 23 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +46 +46 +Connector_Samtec_HLE_THT +Samtec_HLE-123-02-xx-DV-TE_2x23_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-123-02-xx-DV-TE, 23 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +46 +46 +Connector_Samtec_HLE_THT +Samtec_HLE-124-02-xx-DV-PE-LC_2x24_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-124-02-xx-DV-PE-LC, 24 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +48 +48 +Connector_Samtec_HLE_THT +Samtec_HLE-124-02-xx-DV-PE_2x24_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-124-02-xx-DV-PE (compatible alternatives: HLE-124-02-xx-DV-PE-BE), 24 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +48 +48 +Connector_Samtec_HLE_THT +Samtec_HLE-124-02-xx-DV-TE_2x24_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-124-02-xx-DV-TE, 24 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +48 +48 +Connector_Samtec_HLE_THT +Samtec_HLE-125-02-xx-DV-PE-LC_2x25_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-125-02-xx-DV-PE-LC, 25 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +50 +50 +Connector_Samtec_HLE_THT +Samtec_HLE-125-02-xx-DV-PE_2x25_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-125-02-xx-DV-PE (compatible alternatives: HLE-125-02-xx-DV-PE-BE), 25 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +50 +50 +Connector_Samtec_HLE_THT +Samtec_HLE-125-02-xx-DV-TE_2x25_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-125-02-xx-DV-TE, 25 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +50 +50 +Connector_Samtec_HLE_THT +Samtec_HLE-126-02-xx-DV-PE-LC_2x26_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-126-02-xx-DV-PE-LC, 26 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +52 +52 +Connector_Samtec_HLE_THT +Samtec_HLE-126-02-xx-DV-PE_2x26_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-126-02-xx-DV-PE (compatible alternatives: HLE-126-02-xx-DV-PE-BE), 26 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +52 +52 +Connector_Samtec_HLE_THT +Samtec_HLE-126-02-xx-DV-TE_2x26_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-126-02-xx-DV-TE, 26 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +52 +52 +Connector_Samtec_HLE_THT +Samtec_HLE-127-02-xx-DV-PE-LC_2x27_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-127-02-xx-DV-PE-LC, 27 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +54 +54 +Connector_Samtec_HLE_THT +Samtec_HLE-127-02-xx-DV-PE_2x27_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-127-02-xx-DV-PE (compatible alternatives: HLE-127-02-xx-DV-PE-BE), 27 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +54 +54 +Connector_Samtec_HLE_THT +Samtec_HLE-127-02-xx-DV-TE_2x27_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-127-02-xx-DV-TE, 27 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +54 +54 +Connector_Samtec_HLE_THT +Samtec_HLE-128-02-xx-DV-PE-LC_2x28_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-128-02-xx-DV-PE-LC, 28 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +56 +56 +Connector_Samtec_HLE_THT +Samtec_HLE-128-02-xx-DV-PE_2x28_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-128-02-xx-DV-PE (compatible alternatives: HLE-128-02-xx-DV-PE-BE), 28 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +56 +56 +Connector_Samtec_HLE_THT +Samtec_HLE-128-02-xx-DV-TE_2x28_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-128-02-xx-DV-TE, 28 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +56 +56 +Connector_Samtec_HLE_THT +Samtec_HLE-129-02-xx-DV-PE-LC_2x29_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-129-02-xx-DV-PE-LC, 29 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +58 +58 +Connector_Samtec_HLE_THT +Samtec_HLE-129-02-xx-DV-PE_2x29_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-129-02-xx-DV-PE (compatible alternatives: HLE-129-02-xx-DV-PE-BE), 29 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +58 +58 +Connector_Samtec_HLE_THT +Samtec_HLE-129-02-xx-DV-TE_2x29_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-129-02-xx-DV-TE, 29 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +58 +58 +Connector_Samtec_HLE_THT +Samtec_HLE-130-02-xx-DV-PE-LC_2x30_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-130-02-xx-DV-PE-LC, 30 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +60 +60 +Connector_Samtec_HLE_THT +Samtec_HLE-130-02-xx-DV-PE_2x30_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-130-02-xx-DV-PE (compatible alternatives: HLE-130-02-xx-DV-PE-BE), 30 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +60 +60 +Connector_Samtec_HLE_THT +Samtec_HLE-130-02-xx-DV-TE_2x30_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-130-02-xx-DV-TE, 30 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +60 +60 +Connector_Samtec_HLE_THT +Samtec_HLE-131-02-xx-DV-PE-LC_2x31_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-131-02-xx-DV-PE-LC, 31 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +62 +62 +Connector_Samtec_HLE_THT +Samtec_HLE-131-02-xx-DV-PE_2x31_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-131-02-xx-DV-PE (compatible alternatives: HLE-131-02-xx-DV-PE-BE), 31 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +62 +62 +Connector_Samtec_HLE_THT +Samtec_HLE-131-02-xx-DV-TE_2x31_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-131-02-xx-DV-TE, 31 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +62 +62 +Connector_Samtec_HLE_THT +Samtec_HLE-132-02-xx-DV-PE-LC_2x32_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-132-02-xx-DV-PE-LC, 32 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +64 +64 +Connector_Samtec_HLE_THT +Samtec_HLE-132-02-xx-DV-PE_2x32_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-132-02-xx-DV-PE (compatible alternatives: HLE-132-02-xx-DV-PE-BE), 32 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +64 +64 +Connector_Samtec_HLE_THT +Samtec_HLE-132-02-xx-DV-TE_2x32_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-132-02-xx-DV-TE, 32 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +64 +64 +Connector_Samtec_HLE_THT +Samtec_HLE-133-02-xx-DV-PE-LC_2x33_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-133-02-xx-DV-PE-LC, 33 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +66 +66 +Connector_Samtec_HLE_THT +Samtec_HLE-133-02-xx-DV-PE_2x33_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-133-02-xx-DV-PE (compatible alternatives: HLE-133-02-xx-DV-PE-BE), 33 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +66 +66 +Connector_Samtec_HLE_THT +Samtec_HLE-133-02-xx-DV-TE_2x33_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-133-02-xx-DV-TE, 33 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +66 +66 +Connector_Samtec_HLE_THT +Samtec_HLE-134-02-xx-DV-PE-LC_2x34_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-134-02-xx-DV-PE-LC, 34 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +68 +68 +Connector_Samtec_HLE_THT +Samtec_HLE-134-02-xx-DV-PE_2x34_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-134-02-xx-DV-PE (compatible alternatives: HLE-134-02-xx-DV-PE-BE), 34 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +68 +68 +Connector_Samtec_HLE_THT +Samtec_HLE-134-02-xx-DV-TE_2x34_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-134-02-xx-DV-TE, 34 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +68 +68 +Connector_Samtec_HLE_THT +Samtec_HLE-135-02-xx-DV-PE-LC_2x35_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-135-02-xx-DV-PE-LC, 35 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +70 +70 +Connector_Samtec_HLE_THT +Samtec_HLE-135-02-xx-DV-PE_2x35_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-135-02-xx-DV-PE (compatible alternatives: HLE-135-02-xx-DV-PE-BE), 35 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +70 +70 +Connector_Samtec_HLE_THT +Samtec_HLE-135-02-xx-DV-TE_2x35_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-135-02-xx-DV-TE, 35 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +70 +70 +Connector_Samtec_HLE_THT +Samtec_HLE-136-02-xx-DV-PE-LC_2x36_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-136-02-xx-DV-PE-LC, 36 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +72 +72 +Connector_Samtec_HLE_THT +Samtec_HLE-136-02-xx-DV-PE_2x36_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-136-02-xx-DV-PE (compatible alternatives: HLE-136-02-xx-DV-PE-BE), 36 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +72 +72 +Connector_Samtec_HLE_THT +Samtec_HLE-136-02-xx-DV-TE_2x36_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-136-02-xx-DV-TE, 36 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +72 +72 +Connector_Samtec_HLE_THT +Samtec_HLE-137-02-xx-DV-PE-LC_2x37_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-137-02-xx-DV-PE-LC, 37 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +74 +74 +Connector_Samtec_HLE_THT +Samtec_HLE-137-02-xx-DV-PE_2x37_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-137-02-xx-DV-PE (compatible alternatives: HLE-137-02-xx-DV-PE-BE), 37 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +74 +74 +Connector_Samtec_HLE_THT +Samtec_HLE-137-02-xx-DV-TE_2x37_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-137-02-xx-DV-TE, 37 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +74 +74 +Connector_Samtec_HLE_THT +Samtec_HLE-138-02-xx-DV-PE-LC_2x38_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-138-02-xx-DV-PE-LC, 38 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +76 +76 +Connector_Samtec_HLE_THT +Samtec_HLE-138-02-xx-DV-PE_2x38_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-138-02-xx-DV-PE (compatible alternatives: HLE-138-02-xx-DV-PE-BE), 38 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +76 +76 +Connector_Samtec_HLE_THT +Samtec_HLE-138-02-xx-DV-TE_2x38_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-138-02-xx-DV-TE, 38 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +76 +76 +Connector_Samtec_HLE_THT +Samtec_HLE-139-02-xx-DV-PE-LC_2x39_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-139-02-xx-DV-PE-LC, 39 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +78 +78 +Connector_Samtec_HLE_THT +Samtec_HLE-139-02-xx-DV-PE_2x39_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-139-02-xx-DV-PE (compatible alternatives: HLE-139-02-xx-DV-PE-BE), 39 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +78 +78 +Connector_Samtec_HLE_THT +Samtec_HLE-139-02-xx-DV-TE_2x39_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-139-02-xx-DV-TE, 39 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +78 +78 +Connector_Samtec_HLE_THT +Samtec_HLE-140-02-xx-DV-PE-LC_2x40_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-140-02-xx-DV-PE-LC, 40 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +80 +80 +Connector_Samtec_HLE_THT +Samtec_HLE-140-02-xx-DV-PE_2x40_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-140-02-xx-DV-PE (compatible alternatives: HLE-140-02-xx-DV-PE-BE), 40 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +80 +80 +Connector_Samtec_HLE_THT +Samtec_HLE-140-02-xx-DV-TE_2x40_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-140-02-xx-DV-TE, 40 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +80 +80 +Connector_Samtec_HLE_THT +Samtec_HLE-141-02-xx-DV-PE-LC_2x41_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-141-02-xx-DV-PE-LC, 41 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +82 +82 +Connector_Samtec_HLE_THT +Samtec_HLE-141-02-xx-DV-PE_2x41_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-141-02-xx-DV-PE (compatible alternatives: HLE-141-02-xx-DV-PE-BE), 41 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +82 +82 +Connector_Samtec_HLE_THT +Samtec_HLE-141-02-xx-DV-TE_2x41_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-141-02-xx-DV-TE, 41 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +82 +82 +Connector_Samtec_HLE_THT +Samtec_HLE-142-02-xx-DV-PE-LC_2x42_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-142-02-xx-DV-PE-LC, 42 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +84 +84 +Connector_Samtec_HLE_THT +Samtec_HLE-142-02-xx-DV-PE_2x42_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-142-02-xx-DV-PE (compatible alternatives: HLE-142-02-xx-DV-PE-BE), 42 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +84 +84 +Connector_Samtec_HLE_THT +Samtec_HLE-142-02-xx-DV-TE_2x42_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-142-02-xx-DV-TE, 42 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +84 +84 +Connector_Samtec_HLE_THT +Samtec_HLE-143-02-xx-DV-PE-LC_2x43_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-143-02-xx-DV-PE-LC, 43 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +86 +86 +Connector_Samtec_HLE_THT +Samtec_HLE-143-02-xx-DV-PE_2x43_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-143-02-xx-DV-PE (compatible alternatives: HLE-143-02-xx-DV-PE-BE), 43 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +86 +86 +Connector_Samtec_HLE_THT +Samtec_HLE-143-02-xx-DV-TE_2x43_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-143-02-xx-DV-TE, 43 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +86 +86 +Connector_Samtec_HLE_THT +Samtec_HLE-144-02-xx-DV-PE-LC_2x44_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-144-02-xx-DV-PE-LC, 44 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +88 +88 +Connector_Samtec_HLE_THT +Samtec_HLE-144-02-xx-DV-PE_2x44_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-144-02-xx-DV-PE (compatible alternatives: HLE-144-02-xx-DV-PE-BE), 44 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +88 +88 +Connector_Samtec_HLE_THT +Samtec_HLE-144-02-xx-DV-TE_2x44_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-144-02-xx-DV-TE, 44 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +88 +88 +Connector_Samtec_HLE_THT +Samtec_HLE-145-02-xx-DV-PE-LC_2x45_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-145-02-xx-DV-PE-LC, 45 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +90 +90 +Connector_Samtec_HLE_THT +Samtec_HLE-145-02-xx-DV-PE_2x45_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-145-02-xx-DV-PE (compatible alternatives: HLE-145-02-xx-DV-PE-BE), 45 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +90 +90 +Connector_Samtec_HLE_THT +Samtec_HLE-145-02-xx-DV-TE_2x45_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-145-02-xx-DV-TE, 45 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +90 +90 +Connector_Samtec_HLE_THT +Samtec_HLE-146-02-xx-DV-PE-LC_2x46_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-146-02-xx-DV-PE-LC, 46 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +92 +92 +Connector_Samtec_HLE_THT +Samtec_HLE-146-02-xx-DV-PE_2x46_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-146-02-xx-DV-PE (compatible alternatives: HLE-146-02-xx-DV-PE-BE), 46 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +92 +92 +Connector_Samtec_HLE_THT +Samtec_HLE-146-02-xx-DV-TE_2x46_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-146-02-xx-DV-TE, 46 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +92 +92 +Connector_Samtec_HLE_THT +Samtec_HLE-147-02-xx-DV-PE-LC_2x47_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-147-02-xx-DV-PE-LC, 47 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +94 +94 +Connector_Samtec_HLE_THT +Samtec_HLE-147-02-xx-DV-PE_2x47_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-147-02-xx-DV-PE (compatible alternatives: HLE-147-02-xx-DV-PE-BE), 47 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +94 +94 +Connector_Samtec_HLE_THT +Samtec_HLE-147-02-xx-DV-TE_2x47_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-147-02-xx-DV-TE, 47 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +94 +94 +Connector_Samtec_HLE_THT +Samtec_HLE-148-02-xx-DV-PE-LC_2x48_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-148-02-xx-DV-PE-LC, 48 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +96 +96 +Connector_Samtec_HLE_THT +Samtec_HLE-148-02-xx-DV-PE_2x48_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-148-02-xx-DV-PE (compatible alternatives: HLE-148-02-xx-DV-PE-BE), 48 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +96 +96 +Connector_Samtec_HLE_THT +Samtec_HLE-148-02-xx-DV-TE_2x48_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-148-02-xx-DV-TE, 48 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +96 +96 +Connector_Samtec_HLE_THT +Samtec_HLE-149-02-xx-DV-PE-LC_2x49_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-149-02-xx-DV-PE-LC, 49 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +98 +98 +Connector_Samtec_HLE_THT +Samtec_HLE-149-02-xx-DV-PE_2x49_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-149-02-xx-DV-PE (compatible alternatives: HLE-149-02-xx-DV-PE-BE), 49 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +98 +98 +Connector_Samtec_HLE_THT +Samtec_HLE-149-02-xx-DV-TE_2x49_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-149-02-xx-DV-TE, 49 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +98 +98 +Connector_Samtec_HLE_THT +Samtec_HLE-150-02-xx-DV-PE-LC_2x50_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-150-02-xx-DV-PE-LC, 50 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +100 +100 +Connector_Samtec_HLE_THT +Samtec_HLE-150-02-xx-DV-PE_2x50_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-150-02-xx-DV-PE (compatible alternatives: HLE-150-02-xx-DV-PE-BE), 50 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +100 +100 +Connector_Samtec_HLE_THT +Samtec_HLE-150-02-xx-DV-TE_2x50_P2.54mm_Horizontal +Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-150-02-xx-DV-TE, 50 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator +connector Samtec HLE top entry +0 +100 +100 +Connector_Samtec_HPM_THT +Samtec_HPM-01-01-x-S_Straight_1x01_Pitch5.08mm +Through hole straight Samtec HPM power header series 11.94mm post length, 1x01, 5.08mm pitch, single row +Through hole Samtec HPM power header series 11.94mm post length THT 1x01 5.08mm single row +0 +1 +1 +Connector_Samtec_HPM_THT +Samtec_HPM-01-05-x-S_Straight_1x01_Pitch5.08mm +Through hole straight Samtec HPM power header series 3.81mm post length, 1x01, 5.08mm pitch, single row +Through hole Samtec HPM power header series 3.81mm post length THT 1x01 5.08mm single row +0 +1 +1 +Connector_Samtec_HPM_THT +Samtec_HPM-02-01-x-S_Straight_1x02_Pitch5.08mm +Through hole straight Samtec HPM power header series 11.94mm post length, 1x02, 5.08mm pitch, single row +Through hole Samtec HPM power header series 11.94mm post length THT 1x02 5.08mm single row +0 +2 +2 +Connector_Samtec_HPM_THT +Samtec_HPM-02-05-x-S_Straight_1x02_Pitch5.08mm +Through hole straight Samtec HPM power header series 3.81mm post length, 1x02, 5.08mm pitch, single row +Through hole Samtec HPM power header series 3.81mm post length THT 1x02 5.08mm single row +0 +2 +2 +Connector_Samtec_HPM_THT +Samtec_HPM-03-01-x-S_Straight_1x03_Pitch5.08mm +Through hole straight Samtec HPM power header series 11.94mm post length, 1x03, 5.08mm pitch, single row +Through hole Samtec HPM power header series 11.94mm post length THT 1x03 5.08mm single row +0 +3 +3 +Connector_Samtec_HPM_THT +Samtec_HPM-03-05-x-S_Straight_1x03_Pitch5.08mm +Through hole straight Samtec HPM power header series 3.81mm post length, 1x03, 5.08mm pitch, single row +Through hole Samtec HPM power header series 3.81mm post length THT 1x03 5.08mm single row +0 +3 +3 +Connector_Samtec_HPM_THT +Samtec_HPM-04-01-x-S_Straight_1x04_Pitch5.08mm +Through hole straight Samtec HPM power header series 11.94mm post length, 1x04, 5.08mm pitch, single row +Through hole Samtec HPM power header series 11.94mm post length THT 1x04 5.08mm single row +0 +4 +4 +Connector_Samtec_HPM_THT +Samtec_HPM-04-05-x-S_Straight_1x04_Pitch5.08mm +Through hole straight Samtec HPM power header series 3.81mm post length, 1x04, 5.08mm pitch, single row +Through hole Samtec HPM power header series 3.81mm post length THT 1x04 5.08mm single row +0 +4 +4 +Connector_Samtec_HPM_THT +Samtec_HPM-05-01-x-S_Straight_1x05_Pitch5.08mm +Through hole straight Samtec HPM power header series 11.94mm post length, 1x05, 5.08mm pitch, single row +Through hole Samtec HPM power header series 11.94mm post length THT 1x05 5.08mm single row +0 +5 +5 +Connector_Samtec_HPM_THT +Samtec_HPM-05-05-x-S_Straight_1x05_Pitch5.08mm +Through hole straight Samtec HPM power header series 3.81mm post length, 1x05, 5.08mm pitch, single row +Through hole Samtec HPM power header series 3.81mm post length THT 1x05 5.08mm single row +0 +5 +5 +Connector_Samtec_HPM_THT +Samtec_HPM-06-01-x-S_Straight_1x06_Pitch5.08mm +Through hole straight Samtec HPM power header series 11.94mm post length, 1x06, 5.08mm pitch, single row +Through hole Samtec HPM power header series 11.94mm post length THT 1x06 5.08mm single row +0 +6 +6 +Connector_Samtec_HPM_THT +Samtec_HPM-06-05-x-S_Straight_1x06_Pitch5.08mm +Through hole straight Samtec HPM power header series 3.81mm post length, 1x06, 5.08mm pitch, single row +Through hole Samtec HPM power header series 3.81mm post length THT 1x06 5.08mm single row +0 +6 +6 +Connector_Samtec_HPM_THT +Samtec_HPM-07-01-x-S_Straight_1x07_Pitch5.08mm +Through hole straight Samtec HPM power header series 11.94mm post length, 1x07, 5.08mm pitch, single row +Through hole Samtec HPM power header series 11.94mm post length THT 1x07 5.08mm single row +0 +7 +7 +Connector_Samtec_HPM_THT +Samtec_HPM-07-05-x-S_Straight_1x07_Pitch5.08mm +Through hole straight Samtec HPM power header series 3.81mm post length, 1x07, 5.08mm pitch, single row +Through hole Samtec HPM power header series 3.81mm post length THT 1x07 5.08mm single row +0 +7 +7 +Connector_Samtec_HPM_THT +Samtec_HPM-08-01-x-S_Straight_1x08_Pitch5.08mm +Through hole straight Samtec HPM power header series 11.94mm post length, 1x08, 5.08mm pitch, single row +Through hole Samtec HPM power header series 11.94mm post length THT 1x08 5.08mm single row +0 +8 +8 +Connector_Samtec_HPM_THT +Samtec_HPM-08-05-x-S_Straight_1x08_Pitch5.08mm +Through hole straight Samtec HPM power header series 3.81mm post length, 1x08, 5.08mm pitch, single row +Through hole Samtec HPM power header series 3.81mm post length THT 1x08 5.08mm single row +0 +8 +8 +Connector_Samtec_HPM_THT +Samtec_HPM-09-01-x-S_Straight_1x09_Pitch5.08mm +Through hole straight Samtec HPM power header series 11.94mm post length, 1x09, 5.08mm pitch, single row +Through hole Samtec HPM power header series 11.94mm post length THT 1x09 5.08mm single row +0 +9 +9 +Connector_Samtec_HPM_THT +Samtec_HPM-09-05-x-S_Straight_1x09_Pitch5.08mm +Through hole straight Samtec HPM power header series 3.81mm post length, 1x09, 5.08mm pitch, single row +Through hole Samtec HPM power header series 3.81mm post length THT 1x09 5.08mm single row +0 +9 +9 +Connector_Samtec_HPM_THT +Samtec_HPM-10-01-x-S_Straight_1x10_Pitch5.08mm +Through hole straight Samtec HPM power header series 11.94mm post length, 1x10, 5.08mm pitch, single row +Through hole Samtec HPM power header series 11.94mm post length THT 1x10 5.08mm single row +0 +10 +10 +Connector_Samtec_HPM_THT +Samtec_HPM-10-05-x-S_Straight_1x10_Pitch5.08mm +Through hole straight Samtec HPM power header series 3.81mm post length, 1x10, 5.08mm pitch, single row +Through hole Samtec HPM power header series 3.81mm post length THT 1x10 5.08mm single row +0 +10 +10 +Connector_Samtec_HPM_THT +Samtec_HPM-11-01-x-S_Straight_1x11_Pitch5.08mm +Through hole straight Samtec HPM power header series 11.94mm post length, 1x11, 5.08mm pitch, single row +Through hole Samtec HPM power header series 11.94mm post length THT 1x11 5.08mm single row +0 +11 +11 +Connector_Samtec_HPM_THT +Samtec_HPM-11-05-x-S_Straight_1x11_Pitch5.08mm +Through hole straight Samtec HPM power header series 3.81mm post length, 1x11, 5.08mm pitch, single row +Through hole Samtec HPM power header series 3.81mm post length THT 1x11 5.08mm single row +0 +11 +11 +Connector_Samtec_HPM_THT +Samtec_HPM-12-01-x-S_Straight_1x12_Pitch5.08mm +Through hole straight Samtec HPM power header series 11.94mm post length, 1x12, 5.08mm pitch, single row +Through hole Samtec HPM power header series 11.94mm post length THT 1x12 5.08mm single row +0 +12 +12 +Connector_Samtec_HPM_THT +Samtec_HPM-12-05-x-S_Straight_1x12_Pitch5.08mm +Through hole straight Samtec HPM power header series 3.81mm post length, 1x12, 5.08mm pitch, single row +Through hole Samtec HPM power header series 3.81mm post length THT 1x12 5.08mm single row +0 +12 +12 +Connector_Samtec_HPM_THT +Samtec_HPM-13-01-x-S_Straight_1x13_Pitch5.08mm +Through hole straight Samtec HPM power header series 11.94mm post length, 1x13, 5.08mm pitch, single row +Through hole Samtec HPM power header series 11.94mm post length THT 1x13 5.08mm single row +0 +13 +13 +Connector_Samtec_HPM_THT +Samtec_HPM-13-05-x-S_Straight_1x13_Pitch5.08mm +Through hole straight Samtec HPM power header series 3.81mm post length, 1x13, 5.08mm pitch, single row +Through hole Samtec HPM power header series 3.81mm post length THT 1x13 5.08mm single row +0 +13 +13 +Connector_Samtec_HPM_THT +Samtec_HPM-14-01-x-S_Straight_1x14_Pitch5.08mm +Through hole straight Samtec HPM power header series 11.94mm post length, 1x14, 5.08mm pitch, single row +Through hole Samtec HPM power header series 11.94mm post length THT 1x14 5.08mm single row +0 +14 +14 +Connector_Samtec_HPM_THT +Samtec_HPM-14-05-x-S_Straight_1x14_Pitch5.08mm +Through hole straight Samtec HPM power header series 3.81mm post length, 1x14, 5.08mm pitch, single row +Through hole Samtec HPM power header series 3.81mm post length THT 1x14 5.08mm single row +0 +14 +14 +Connector_Samtec_HPM_THT +Samtec_HPM-15-01-x-S_Straight_1x15_Pitch5.08mm +Through hole straight Samtec HPM power header series 11.94mm post length, 1x15, 5.08mm pitch, single row +Through hole Samtec HPM power header series 11.94mm post length THT 1x15 5.08mm single row +0 +15 +15 +Connector_Samtec_HPM_THT +Samtec_HPM-15-05-x-S_Straight_1x15_Pitch5.08mm +Through hole straight Samtec HPM power header series 3.81mm post length, 1x15, 5.08mm pitch, single row +Through hole Samtec HPM power header series 3.81mm post length THT 1x15 5.08mm single row +0 +15 +15 +Connector_Samtec_HPM_THT +Samtec_HPM-16-01-x-S_Straight_1x16_Pitch5.08mm +Through hole straight Samtec HPM power header series 11.94mm post length, 1x16, 5.08mm pitch, single row +Through hole Samtec HPM power header series 11.94mm post length THT 1x16 5.08mm single row +0 +16 +16 +Connector_Samtec_HPM_THT +Samtec_HPM-16-05-x-S_Straight_1x16_Pitch5.08mm +Through hole straight Samtec HPM power header series 3.81mm post length, 1x16, 5.08mm pitch, single row +Through hole Samtec HPM power header series 3.81mm post length THT 1x16 5.08mm single row +0 +16 +16 +Connector_Samtec_HPM_THT +Samtec_HPM-17-01-x-S_Straight_1x17_Pitch5.08mm +Through hole straight Samtec HPM power header series 11.94mm post length, 1x17, 5.08mm pitch, single row +Through hole Samtec HPM power header series 11.94mm post length THT 1x17 5.08mm single row +0 +17 +17 +Connector_Samtec_HPM_THT +Samtec_HPM-17-05-x-S_Straight_1x17_Pitch5.08mm +Through hole straight Samtec HPM power header series 3.81mm post length, 1x17, 5.08mm pitch, single row +Through hole Samtec HPM power header series 3.81mm post length THT 1x17 5.08mm single row +0 +17 +17 +Connector_Samtec_HPM_THT +Samtec_HPM-18-01-x-S_Straight_1x18_Pitch5.08mm +Through hole straight Samtec HPM power header series 11.94mm post length, 1x18, 5.08mm pitch, single row +Through hole Samtec HPM power header series 11.94mm post length THT 1x18 5.08mm single row +0 +18 +18 +Connector_Samtec_HPM_THT +Samtec_HPM-18-05-x-S_Straight_1x18_Pitch5.08mm +Through hole straight Samtec HPM power header series 3.81mm post length, 1x18, 5.08mm pitch, single row +Through hole Samtec HPM power header series 3.81mm post length THT 1x18 5.08mm single row +0 +18 +18 +Connector_Samtec_HPM_THT +Samtec_HPM-19-01-x-S_Straight_1x19_Pitch5.08mm +Through hole straight Samtec HPM power header series 11.94mm post length, 1x19, 5.08mm pitch, single row +Through hole Samtec HPM power header series 11.94mm post length THT 1x19 5.08mm single row +0 +19 +19 +Connector_Samtec_HPM_THT +Samtec_HPM-19-05-x-S_Straight_1x19_Pitch5.08mm +Through hole straight Samtec HPM power header series 3.81mm post length, 1x19, 5.08mm pitch, single row +Through hole Samtec HPM power header series 3.81mm post length THT 1x19 5.08mm single row +0 +19 +19 +Connector_Samtec_HSEC8 +Samtec_HSEC8-109-01-X-DV-A-BL_2x09_P0.8mm_Pol04_Socket_WeldTabs_BoardLocks +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs, board locks (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +20 +18 +Connector_Samtec_HSEC8 +Samtec_HSEC8-109-01-X-DV-A-WT_2x09_P0.8mm_Pol04_Socket_WeldTabs +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +20 +18 +Connector_Samtec_HSEC8 +Samtec_HSEC8-109-01-X-DV-A_2x09_P0.8mm_Pol04_Socket_AlignmentPins +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +18 +18 +Connector_Samtec_HSEC8 +Samtec_HSEC8-109-01-X-DV_2x09_P0.8mm_Pol04_Socket +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +18 +18 +Connector_Samtec_HSEC8 +Samtec_HSEC8-110-01-X-DV-A-BL_2x10_P0.8mm_Socket_WeldTabs_BoardLocks +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs, board locks (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +22 +20 +Connector_Samtec_HSEC8 +Samtec_HSEC8-110-01-X-DV-A-WT_2x10_P0.8mm_Socket_WeldTabs +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +22 +20 +Connector_Samtec_HSEC8 +Samtec_HSEC8-110-01-X-DV-A_2x10_P0.8mm_Socket_AlignmentPins +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +20 +20 +Connector_Samtec_HSEC8 +Samtec_HSEC8-110-01-X-DV_2x10_P0.8mm_Socket +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +20 +20 +Connector_Samtec_HSEC8 +Samtec_HSEC8-110-03-X-DV-A-WT_2x10_P0.8mm_Socket_WeldTabs +0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +22 +20 +Connector_Samtec_HSEC8 +Samtec_HSEC8-110-03-X-DV-A_2x10_P0.8mm_Socket_AlignmentPins +0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +20 +20 +Connector_Samtec_HSEC8 +Samtec_HSEC8-110-03-X-DV_2x10_P0.8mm_Socket +0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +20 +20 +Connector_Samtec_HSEC8 +Samtec_HSEC8-113-01-X-DV-A-BL_2x13_P0.8mm_Pol06_Socket_WeldTabs_BoardLocks +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs, board locks (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +28 +26 +Connector_Samtec_HSEC8 +Samtec_HSEC8-113-01-X-DV-A-WT_2x13_P0.8mm_Pol06_Socket_WeldTabs +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +28 +26 +Connector_Samtec_HSEC8 +Samtec_HSEC8-113-01-X-DV-A_2x13_P0.8mm_Pol06_Socket_AlignmentPins +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +26 +26 +Connector_Samtec_HSEC8 +Samtec_HSEC8-113-01-X-DV_2x13_P0.8mm_Pol06_Socket +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +26 +26 +Connector_Samtec_HSEC8 +Samtec_HSEC8-120-01-X-DV-A-BL_2x20_P0.8mm_Socket_WeldTabs_BoardLocks +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs, board locks (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +42 +40 +Connector_Samtec_HSEC8 +Samtec_HSEC8-120-01-X-DV-A-WT_2x20_P0.8mm_Socket_WeldTabs +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +42 +40 +Connector_Samtec_HSEC8 +Samtec_HSEC8-120-01-X-DV-A_2x20_P0.8mm_Socket_AlignmentPins +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +40 +40 +Connector_Samtec_HSEC8 +Samtec_HSEC8-120-01-X-DV_2x20_P0.8mm_Socket +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +40 +40 +Connector_Samtec_HSEC8 +Samtec_HSEC8-120-03-X-DV-A-WT_2x20_P0.8mm_Socket_WeldTabs +0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +42 +40 +Connector_Samtec_HSEC8 +Samtec_HSEC8-120-03-X-DV-A_2x20_P0.8mm_Socket_AlignmentPins +0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +40 +40 +Connector_Samtec_HSEC8 +Samtec_HSEC8-120-03-X-DV_2x20_P0.8mm_Socket +0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +40 +40 +Connector_Samtec_HSEC8 +Samtec_HSEC8-125-01-X-DV-A-BL_2x25_P0.8mm_Pol06_Socket_WeldTabs_BoardLocks +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs, board locks (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +52 +50 +Connector_Samtec_HSEC8 +Samtec_HSEC8-125-01-X-DV-A-WT_2x25_P0.8mm_Pol06_Socket_WeldTabs +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +52 +50 +Connector_Samtec_HSEC8 +Samtec_HSEC8-125-01-X-DV-A_2x25_P0.8mm_Pol06_Socket_AlignmentPins +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +50 +50 +Connector_Samtec_HSEC8 +Samtec_HSEC8-125-01-X-DV_2x25_P0.8mm_Pol06_Socket +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +50 +50 +Connector_Samtec_HSEC8 +Samtec_HSEC8-130-01-X-DV-A-BL_2x30_P0.8mm_Socket_WeldTabs_BoardLocks +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs, board locks (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +62 +60 +Connector_Samtec_HSEC8 +Samtec_HSEC8-130-01-X-DV-A-WT_2x30_P0.8mm_Socket_WeldTabs +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +62 +60 +Connector_Samtec_HSEC8 +Samtec_HSEC8-130-01-X-DV-A_2x30_P0.8mm_Socket_AlignmentPins +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +60 +60 +Connector_Samtec_HSEC8 +Samtec_HSEC8-130-01-X-DV_2x30_P0.8mm_Socket +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +60 +60 +Connector_Samtec_HSEC8 +Samtec_HSEC8-130-03-X-DV-A-WT_2x30_P0.8mm_Socket_WeldTabs +0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +62 +60 +Connector_Samtec_HSEC8 +Samtec_HSEC8-130-03-X-DV-A_2x30_P0.8mm_Socket_AlignmentPins +0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +60 +60 +Connector_Samtec_HSEC8 +Samtec_HSEC8-130-03-X-DV_2x30_P0.8mm_Socket +0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +60 +60 +Connector_Samtec_HSEC8 +Samtec_HSEC8-137-01-X-DV-A-BL_2x37_P0.8mm_Pol21_Socket_WeldTabs_BoardLocks +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs, board locks (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +76 +74 +Connector_Samtec_HSEC8 +Samtec_HSEC8-137-01-X-DV-A-WT_2x37_P0.8mm_Pol21_Socket_WeldTabs +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +76 +74 +Connector_Samtec_HSEC8 +Samtec_HSEC8-137-01-X-DV-A_2x37_P0.8mm_Pol21_Socket_AlignmentPins +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +74 +74 +Connector_Samtec_HSEC8 +Samtec_HSEC8-137-01-X-DV_2x37_P0.8mm_Pol21_Socket +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +74 +74 +Connector_Samtec_HSEC8 +Samtec_HSEC8-140-01-X-DV-A-BL_2x40_P0.8mm_Pol22_Socket_WeldTabs_BoardLocks +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs, board locks (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +82 +80 +Connector_Samtec_HSEC8 +Samtec_HSEC8-140-01-X-DV-A-WT_2x40_P0.8mm_Pol22_Socket_WeldTabs +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +82 +80 +Connector_Samtec_HSEC8 +Samtec_HSEC8-140-01-X-DV-A_2x40_P0.8mm_Pol22_Socket_AlignmentPins +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +80 +80 +Connector_Samtec_HSEC8 +Samtec_HSEC8-140-01-X-DV_2x40_P0.8mm_Pol22_Socket +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +80 +80 +Connector_Samtec_HSEC8 +Samtec_HSEC8-140-03-X-DV-A-WT_2x40_P0.8mm_Pol22_Socket_WeldTabs +0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +82 +80 +Connector_Samtec_HSEC8 +Samtec_HSEC8-140-03-X-DV-A_2x40_P0.8mm_Pol22_Socket_AlignmentPins +0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +80 +80 +Connector_Samtec_HSEC8 +Samtec_HSEC8-140-03-X-DV_2x40_P0.8mm_Pol22_Socket +0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +80 +80 +Connector_Samtec_HSEC8 +Samtec_HSEC8-149-01-X-DV-A-BL_2x49_P0.8mm_Pol27_Socket_WeldTabs_BoardLocks +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs, board locks (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +100 +98 +Connector_Samtec_HSEC8 +Samtec_HSEC8-149-01-X-DV-A-WT_2x49_P0.8mm_Pol27_Socket_WeldTabs +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +100 +98 +Connector_Samtec_HSEC8 +Samtec_HSEC8-149-01-X-DV-A_2x49_P0.8mm_Pol27_Socket_AlignmentPins +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +98 +98 +Connector_Samtec_HSEC8 +Samtec_HSEC8-149-01-X-DV_2x49_P0.8mm_Pol27_Socket +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +98 +98 +Connector_Samtec_HSEC8 +Samtec_HSEC8-150-01-X-DV-A-BL_2x50_P0.8mm_Pol27_Socket_WeldTabs_BoardLocks +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs, board locks (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +102 +100 +Connector_Samtec_HSEC8 +Samtec_HSEC8-150-01-X-DV-A-WT_2x50_P0.8mm_Pol27_Socket_WeldTabs +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +102 +100 +Connector_Samtec_HSEC8 +Samtec_HSEC8-150-01-X-DV-A_2x50_P0.8mm_Pol27_Socket_AlignmentPins +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +100 +100 +Connector_Samtec_HSEC8 +Samtec_HSEC8-150-01-X-DV_2x50_P0.8mm_Pol27_Socket +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +100 +100 +Connector_Samtec_HSEC8 +Samtec_HSEC8-150-03-X-DV-A-WT_2x50_P0.8mm_Pol27_Socket_WeldTabs +0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +102 +100 +Connector_Samtec_HSEC8 +Samtec_HSEC8-150-03-X-DV-A_2x50_P0.8mm_Pol27_Socket_AlignmentPins +0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +100 +100 +Connector_Samtec_HSEC8 +Samtec_HSEC8-150-03-X-DV_2x50_P0.8mm_Pol27_Socket +0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +100 +100 +Connector_Samtec_HSEC8 +Samtec_HSEC8-160-01-X-DV-A-BL_2x60_P0.8mm_Pol32_Socket_WeldTabs_BoardLocks +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs, board locks (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +122 +120 +Connector_Samtec_HSEC8 +Samtec_HSEC8-160-01-X-DV-A-WT_2x60_P0.8mm_Pol32_Socket_WeldTabs +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +122 +120 +Connector_Samtec_HSEC8 +Samtec_HSEC8-160-01-X-DV-A_2x60_P0.8mm_Pol32_Socket_AlignmentPins +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +120 +120 +Connector_Samtec_HSEC8 +Samtec_HSEC8-160-01-X-DV_2x60_P0.8mm_Pol32_Socket +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +120 +120 +Connector_Samtec_HSEC8 +Samtec_HSEC8-160-03-X-DV-A-WT_2x60_P0.8mm_Pol32_Socket_WeldTabs +0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +122 +120 +Connector_Samtec_HSEC8 +Samtec_HSEC8-160-03-X-DV-A_2x60_P0.8mm_Pol32_Socket_AlignmentPins +0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +120 +120 +Connector_Samtec_HSEC8 +Samtec_HSEC8-160-03-X-DV_2x60_P0.8mm_Pol32_Socket +0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +120 +120 +Connector_Samtec_HSEC8 +Samtec_HSEC8-170-01-X-DV-A-BL_2x70_P0.8mm_Pol32_Socket_WeldTabs_BoardLocks +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs, board locks (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +142 +140 +Connector_Samtec_HSEC8 +Samtec_HSEC8-170-01-X-DV-A-WT_2x70_P0.8mm_Pol32_Socket_WeldTabs +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +142 +140 +Connector_Samtec_HSEC8 +Samtec_HSEC8-170-01-X-DV-A_2x70_P0.8mm_Pol32_Socket_AlignmentPins +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +140 +140 +Connector_Samtec_HSEC8 +Samtec_HSEC8-170-01-X-DV_2x70_P0.8mm_Pol32_Socket +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +140 +140 +Connector_Samtec_HSEC8 +Samtec_HSEC8-170-03-X-DV-A-WT_2x70_P0.8mm_Pol32_Socket_WeldTabs +0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +142 +140 +Connector_Samtec_HSEC8 +Samtec_HSEC8-170-03-X-DV-A_2x70_P0.8mm_Pol32_Socket_AlignmentPins +0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +140 +140 +Connector_Samtec_HSEC8 +Samtec_HSEC8-170-03-X-DV_2x70_P0.8mm_Pol32_Socket +0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +140 +140 +Connector_Samtec_HSEC8 +Samtec_HSEC8-180-01-X-DV-A-BL_2x80_P0.8mm_Pol32_Socket_WeldTabs_BoardLocks +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs, board locks (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +162 +160 +Connector_Samtec_HSEC8 +Samtec_HSEC8-180-01-X-DV-A-WT_2x80_P0.8mm_Pol32_Socket_WeldTabs +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +162 +160 +Connector_Samtec_HSEC8 +Samtec_HSEC8-180-01-X-DV-A_2x80_P0.8mm_Pol32_Socket_AlignmentPins +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +160 +160 +Connector_Samtec_HSEC8 +Samtec_HSEC8-180-01-X-DV_2x80_P0.8mm_Pol32_Socket +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +160 +160 +Connector_Samtec_HSEC8 +Samtec_HSEC8-180-03-X-DV-A-WT_2x80_P0.8mm_Pol32_Socket_WeldTabs +0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +162 +160 +Connector_Samtec_HSEC8 +Samtec_HSEC8-180-03-X-DV-A_2x80_P0.8mm_Pol32_Socket_AlignmentPins +0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +160 +160 +Connector_Samtec_HSEC8 +Samtec_HSEC8-180-03-X-DV_2x80_P0.8mm_Pol32_Socket +0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +160 +160 +Connector_Samtec_HSEC8 +Samtec_HSEC8-190-01-X-DV-A-BL_2x90_P0.8mm_Pol32_Socket_WeldTabs_BoardLocks +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs, board locks (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +182 +180 +Connector_Samtec_HSEC8 +Samtec_HSEC8-190-01-X-DV-A-WT_2x90_P0.8mm_Pol32_Socket_WeldTabs +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +182 +180 +Connector_Samtec_HSEC8 +Samtec_HSEC8-190-01-X-DV-A_2x90_P0.8mm_Pol32_Socket_AlignmentPins +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +180 +180 +Connector_Samtec_HSEC8 +Samtec_HSEC8-190-01-X-DV_2x90_P0.8mm_Pol32_Socket +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +180 +180 +Connector_Samtec_HSEC8 +Samtec_HSEC8-190-03-X-DV-A-WT_2x90_P0.8mm_Pol32_Socket_WeldTabs +0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +182 +180 +Connector_Samtec_HSEC8 +Samtec_HSEC8-190-03-X-DV-A_2x90_P0.8mm_Pol32_Socket_AlignmentPins +0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +180 +180 +Connector_Samtec_HSEC8 +Samtec_HSEC8-190-03-X-DV_2x90_P0.8mm_Pol32_Socket +0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +180 +180 +Connector_Samtec_HSEC8 +Samtec_HSEC8-1100-01-X-DV-A-BL_2x100_P0.8mm_Pol32_Socket_WeldTabs_BoardLocks +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs, board locks (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +202 +200 +Connector_Samtec_HSEC8 +Samtec_HSEC8-1100-01-X-DV-A-WT_2x100_P0.8mm_Pol32_Socket_WeldTabs +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +202 +200 +Connector_Samtec_HSEC8 +Samtec_HSEC8-1100-01-X-DV-A_2x100_P0.8mm_Pol32_Socket_AlignmentPins +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +200 +200 +Connector_Samtec_HSEC8 +Samtec_HSEC8-1100-01-X-DV_2x100_P0.8mm_Pol32_Socket +0.8 mm Highspeed card edge card connector socket for 1.57mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +200 +200 +Connector_Samtec_HSEC8 +Samtec_HSEC8-1100-03-X-DV-A-WT_2x100_P0.8mm_Pol32_Socket_WeldTabs +0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical, alignment pins, weld tabs (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +202 +200 +Connector_Samtec_HSEC8 +Samtec_HSEC8-1100-03-X-DV-A_2x100_P0.8mm_Pol32_Socket_AlignmentPins +0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical, alignment pins (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +200 +200 +Connector_Samtec_HSEC8 +Samtec_HSEC8-1100-03-X-DV_2x100_P0.8mm_Pol32_Socket +0.8 mm Highspeed card edge card connector socket for 2.36mm PCBs, vertical (source: https://suddendocs.samtec.com/prints/hsec8-1xxx-xx-xx-dv-x-xx-footprint.pdf) +conn samtec card-edge socket high-speed +0 +200 +200 +Connector_Samtec_MicroMate +Samtec_T1M-02-X-S-RA_1x02-1MP_P1.0mm_Terminal_Horizontal +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal (Right Angle) (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +4 +3 +Connector_Samtec_MicroMate +Samtec_T1M-02-X-S-V_1x02-1MP_P1.0mm_Terminal_Vertical +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +4 +3 +Connector_Samtec_MicroMate +Samtec_T1M-02-X-SH-L_1x02-1MP_P1.0mm_Terminal_Horizontal_Latch +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +4 +3 +Connector_Samtec_MicroMate +Samtec_T1M-02-X-SV-L_1x02-1MP_P1.0mm_Terminal_Vertical_Latch +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +4 +3 +Connector_Samtec_MicroMate +Samtec_T1M-03-X-S-RA_1x03-1MP_P1.0mm_Terminal_Horizontal +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal (Right Angle) (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +5 +4 +Connector_Samtec_MicroMate +Samtec_T1M-03-X-S-V_1x03-1MP_P1.0mm_Terminal_Vertical +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +5 +4 +Connector_Samtec_MicroMate +Samtec_T1M-03-X-SH-L_1x03-1MP_P1.0mm_Terminal_Horizontal_Latch +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +5 +4 +Connector_Samtec_MicroMate +Samtec_T1M-03-X-SV-L_1x03-1MP_P1.0mm_Terminal_Vertical_Latch +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +5 +4 +Connector_Samtec_MicroMate +Samtec_T1M-04-X-S-RA_1x04-1MP_P1.0mm_Terminal_Horizontal +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal (Right Angle) (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +6 +5 +Connector_Samtec_MicroMate +Samtec_T1M-04-X-S-V_1x04-1MP_P1.0mm_Terminal_Vertical +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +6 +5 +Connector_Samtec_MicroMate +Samtec_T1M-04-X-SH-L_1x04-1MP_P1.0mm_Terminal_Horizontal_Latch +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +6 +5 +Connector_Samtec_MicroMate +Samtec_T1M-04-X-SV-L_1x04-1MP_P1.0mm_Terminal_Vertical_Latch +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +6 +5 +Connector_Samtec_MicroMate +Samtec_T1M-05-X-S-RA_1x05-1MP_P1.0mm_Terminal_Horizontal +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal (Right Angle) (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +7 +6 +Connector_Samtec_MicroMate +Samtec_T1M-05-X-S-V_1x05-1MP_P1.0mm_Terminal_Vertical +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +7 +6 +Connector_Samtec_MicroMate +Samtec_T1M-05-X-SH-L_1x05-1MP_P1.0mm_Terminal_Horizontal_Latch +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +7 +6 +Connector_Samtec_MicroMate +Samtec_T1M-05-X-SV-L_1x05-1MP_P1.0mm_Terminal_Vertical_Latch +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +7 +6 +Connector_Samtec_MicroMate +Samtec_T1M-06-X-S-RA_1x06-1MP_P1.0mm_Terminal_Horizontal +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal (Right Angle) (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +8 +7 +Connector_Samtec_MicroMate +Samtec_T1M-06-X-S-V_1x06-1MP_P1.0mm_Terminal_Vertical +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +8 +7 +Connector_Samtec_MicroMate +Samtec_T1M-06-X-SH-L_1x06-1MP_P1.0mm_Terminal_Horizontal_Latch +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +8 +7 +Connector_Samtec_MicroMate +Samtec_T1M-06-X-SV-L_1x06-1MP_P1.0mm_Terminal_Vertical_Latch +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +8 +7 +Connector_Samtec_MicroMate +Samtec_T1M-07-X-S-RA_1x07-1MP_P1.0mm_Terminal_Horizontal +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal (Right Angle) (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +9 +8 +Connector_Samtec_MicroMate +Samtec_T1M-07-X-S-V_1x07-1MP_P1.0mm_Terminal_Vertical +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +9 +8 +Connector_Samtec_MicroMate +Samtec_T1M-07-X-SH-L_1x07-1MP_P1.0mm_Terminal_Horizontal_Latch +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +9 +8 +Connector_Samtec_MicroMate +Samtec_T1M-07-X-SV-L_1x07-1MP_P1.0mm_Terminal_Vertical_Latch +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +9 +8 +Connector_Samtec_MicroMate +Samtec_T1M-08-X-S-RA_1x08-1MP_P1.0mm_Terminal_Horizontal +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal (Right Angle) (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +10 +9 +Connector_Samtec_MicroMate +Samtec_T1M-08-X-S-V_1x08-1MP_P1.0mm_Terminal_Vertical +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +10 +9 +Connector_Samtec_MicroMate +Samtec_T1M-08-X-SH-L_1x08-1MP_P1.0mm_Terminal_Horizontal_Latch +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +10 +9 +Connector_Samtec_MicroMate +Samtec_T1M-08-X-SV-L_1x08-1MP_P1.0mm_Terminal_Vertical_Latch +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +10 +9 +Connector_Samtec_MicroMate +Samtec_T1M-09-X-S-RA_1x09-1MP_P1.0mm_Terminal_Horizontal +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal (Right Angle) (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +11 +10 +Connector_Samtec_MicroMate +Samtec_T1M-09-X-S-V_1x09-1MP_P1.0mm_Terminal_Vertical +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +11 +10 +Connector_Samtec_MicroMate +Samtec_T1M-09-X-SH-L_1x09-1MP_P1.0mm_Terminal_Horizontal_Latch +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +11 +10 +Connector_Samtec_MicroMate +Samtec_T1M-09-X-SV-L_1x09-1MP_P1.0mm_Terminal_Vertical_Latch +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +11 +10 +Connector_Samtec_MicroMate +Samtec_T1M-10-X-S-RA_1x10-1MP_P1.0mm_Terminal_Horizontal +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal (Right Angle) (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +12 +11 +Connector_Samtec_MicroMate +Samtec_T1M-10-X-S-V_1x10-1MP_P1.0mm_Terminal_Vertical +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +12 +11 +Connector_Samtec_MicroMate +Samtec_T1M-10-X-SH-L_1x10-1MP_P1.0mm_Terminal_Horizontal_Latch +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +12 +11 +Connector_Samtec_MicroMate +Samtec_T1M-10-X-SV-L_1x10-1MP_P1.0mm_Terminal_Vertical_Latch +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +12 +11 +Connector_Samtec_MicroMate +Samtec_T1M-11-X-S-RA_1x11-1MP_P1.0mm_Terminal_Horizontal +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal (Right Angle) (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +13 +12 +Connector_Samtec_MicroMate +Samtec_T1M-11-X-S-V_1x11-1MP_P1.0mm_Terminal_Vertical +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +13 +12 +Connector_Samtec_MicroMate +Samtec_T1M-11-X-SH-L_1x11-1MP_P1.0mm_Terminal_Horizontal_Latch +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +13 +12 +Connector_Samtec_MicroMate +Samtec_T1M-11-X-SV-L_1x11-1MP_P1.0mm_Terminal_Vertical_Latch +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +13 +12 +Connector_Samtec_MicroMate +Samtec_T1M-12-X-S-RA_1x12-1MP_P1.0mm_Terminal_Horizontal +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal (Right Angle) (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +14 +13 +Connector_Samtec_MicroMate +Samtec_T1M-12-X-S-V_1x12-1MP_P1.0mm_Terminal_Vertical +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +14 +13 +Connector_Samtec_MicroMate +Samtec_T1M-12-X-SH-L_1x12-1MP_P1.0mm_Terminal_Horizontal_Latch +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +14 +13 +Connector_Samtec_MicroMate +Samtec_T1M-12-X-SV-L_1x12-1MP_P1.0mm_Terminal_Vertical_Latch +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +14 +13 +Connector_Samtec_MicroMate +Samtec_T1M-13-X-S-RA_1x13-1MP_P1.0mm_Terminal_Horizontal +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal (Right Angle) (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +15 +14 +Connector_Samtec_MicroMate +Samtec_T1M-13-X-S-V_1x13-1MP_P1.0mm_Terminal_Vertical +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +15 +14 +Connector_Samtec_MicroMate +Samtec_T1M-13-X-SH-L_1x13-1MP_P1.0mm_Terminal_Horizontal_Latch +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +15 +14 +Connector_Samtec_MicroMate +Samtec_T1M-13-X-SV-L_1x13-1MP_P1.0mm_Terminal_Vertical_Latch +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +15 +14 +Connector_Samtec_MicroMate +Samtec_T1M-14-X-S-RA_1x14-1MP_P1.0mm_Terminal_Horizontal +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal (Right Angle) (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +16 +15 +Connector_Samtec_MicroMate +Samtec_T1M-14-X-S-V_1x14-1MP_P1.0mm_Terminal_Vertical +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +16 +15 +Connector_Samtec_MicroMate +Samtec_T1M-14-X-SH-L_1x14-1MP_P1.0mm_Terminal_Horizontal_Latch +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +16 +15 +Connector_Samtec_MicroMate +Samtec_T1M-14-X-SV-L_1x14-1MP_P1.0mm_Terminal_Vertical_Latch +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +16 +15 +Connector_Samtec_MicroMate +Samtec_T1M-15-X-S-RA_1x15-1MP_P1.0mm_Terminal_Horizontal +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal (Right Angle) (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +17 +16 +Connector_Samtec_MicroMate +Samtec_T1M-15-X-S-V_1x15-1MP_P1.0mm_Terminal_Vertical +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +17 +16 +Connector_Samtec_MicroMate +Samtec_T1M-15-X-SH-L_1x15-1MP_P1.0mm_Terminal_Horizontal_Latch +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +17 +16 +Connector_Samtec_MicroMate +Samtec_T1M-15-X-SV-L_1x15-1MP_P1.0mm_Terminal_Vertical_Latch +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +17 +16 +Connector_Samtec_MicroMate +Samtec_T1M-16-X-S-RA_1x16-1MP_P1.0mm_Terminal_Horizontal +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal (Right Angle) (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +18 +17 +Connector_Samtec_MicroMate +Samtec_T1M-16-X-S-V_1x16-1MP_P1.0mm_Terminal_Vertical +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +18 +17 +Connector_Samtec_MicroMate +Samtec_T1M-16-X-SH-L_1x16-1MP_P1.0mm_Terminal_Horizontal_Latch +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +18 +17 +Connector_Samtec_MicroMate +Samtec_T1M-16-X-SV-L_1x16-1MP_P1.0mm_Terminal_Vertical_Latch +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +18 +17 +Connector_Samtec_MicroMate +Samtec_T1M-17-X-S-RA_1x17-1MP_P1.0mm_Terminal_Horizontal +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal (Right Angle) (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +19 +18 +Connector_Samtec_MicroMate +Samtec_T1M-17-X-S-V_1x17-1MP_P1.0mm_Terminal_Vertical +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +19 +18 +Connector_Samtec_MicroMate +Samtec_T1M-17-X-SH-L_1x17-1MP_P1.0mm_Terminal_Horizontal_Latch +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +19 +18 +Connector_Samtec_MicroMate +Samtec_T1M-17-X-SV-L_1x17-1MP_P1.0mm_Terminal_Vertical_Latch +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +19 +18 +Connector_Samtec_MicroMate +Samtec_T1M-18-X-S-RA_1x18-1MP_P1.0mm_Terminal_Horizontal +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal (Right Angle) (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +20 +19 +Connector_Samtec_MicroMate +Samtec_T1M-18-X-S-V_1x18-1MP_P1.0mm_Terminal_Vertical +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +20 +19 +Connector_Samtec_MicroMate +Samtec_T1M-18-X-SH-L_1x18-1MP_P1.0mm_Terminal_Horizontal_Latch +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +20 +19 +Connector_Samtec_MicroMate +Samtec_T1M-18-X-SV-L_1x18-1MP_P1.0mm_Terminal_Vertical_Latch +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +20 +19 +Connector_Samtec_MicroMate +Samtec_T1M-19-X-S-RA_1x19-1MP_P1.0mm_Terminal_Horizontal +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal (Right Angle) (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +21 +20 +Connector_Samtec_MicroMate +Samtec_T1M-19-X-S-V_1x19-1MP_P1.0mm_Terminal_Vertical +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +21 +20 +Connector_Samtec_MicroMate +Samtec_T1M-19-X-SH-L_1x19-1MP_P1.0mm_Terminal_Horizontal_Latch +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +21 +20 +Connector_Samtec_MicroMate +Samtec_T1M-19-X-SV-L_1x19-1MP_P1.0mm_Terminal_Vertical_Latch +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +21 +20 +Connector_Samtec_MicroMate +Samtec_T1M-20-X-S-RA_1x20-1MP_P1.0mm_Terminal_Horizontal +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal (Right Angle) (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +22 +21 +Connector_Samtec_MicroMate +Samtec_T1M-20-X-S-V_1x20-1MP_P1.0mm_Terminal_Vertical +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +22 +21 +Connector_Samtec_MicroMate +Samtec_T1M-20-X-SH-L_1x20-1MP_P1.0mm_Terminal_Horizontal_Latch +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Horizontal, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +22 +21 +Connector_Samtec_MicroMate +Samtec_T1M-20-X-SV-L_1x20-1MP_P1.0mm_Terminal_Vertical_Latch +Samtec Micro Mate Discrete Wire Terminal Strip, 1.00 mm Pitch, Single Row, Vertical, Latch (source: https://suddendocs.samtec.com/prints/t1m-single-row-footprint.pdf) +conn samtec discrete wire terminal +0 +22 +21 +Connector_Stocko +Stocko_MKS_1651-6-0-202_1x2_P2.50mm_Vertical +Stocko MKS 16xx series connector, (https://www.stocko-contact.com/downloads/steckverbindersystem-raster-2,5-mm.pdf#page=15), generated with kicad-footprint-generator +Stocko RFK MKS 16xx +0 +2 +2 +Connector_Stocko +Stocko_MKS_1652-6-0-202_1x2_P2.50mm_Vertical +Stocko MKS 16xx series connector, (https://www.stocko-contact.com/downloads/steckverbindersystem-raster-2,5-mm.pdf#page=15), generated with kicad-footprint-generator +Stocko RFK MKS 16xx +0 +2 +2 +Connector_Stocko +Stocko_MKS_1653-6-0-303_1x3_P2.50mm_Vertical +Stocko MKS 16xx series connector, (https://www.stocko-contact.com/downloads/steckverbindersystem-raster-2,5-mm.pdf#page=15), generated with kicad-footprint-generator +Stocko RFK MKS 16xx +0 +3 +3 +Connector_Stocko +Stocko_MKS_1654-6-0-404_1x4_P2.50mm_Vertical +Stocko MKS 16xx series connector, (https://www.stocko-contact.com/downloads/steckverbindersystem-raster-2,5-mm.pdf#page=15), generated with kicad-footprint-generator +Stocko RFK MKS 16xx +0 +4 +4 +Connector_Stocko +Stocko_MKS_1655-6-0-505_1x5_P2.50mm_Vertical +Stocko MKS 16xx series connector, (https://www.stocko-contact.com/downloads/steckverbindersystem-raster-2,5-mm.pdf#page=15), generated with kicad-footprint-generator +Stocko RFK MKS 16xx +0 +5 +5 +Connector_Stocko +Stocko_MKS_1656-6-0-606_1x6_P2.50mm_Vertical +Stocko MKS 16xx series connector, (https://www.stocko-contact.com/downloads/steckverbindersystem-raster-2,5-mm.pdf#page=15), generated with kicad-footprint-generator +Stocko RFK MKS 16xx +0 +6 +6 +Connector_Stocko +Stocko_MKS_1657-6-0-707_1x7_P2.50mm_Vertical +Stocko MKS 16xx series connector, (https://www.stocko-contact.com/downloads/steckverbindersystem-raster-2,5-mm.pdf#page=15), generated with kicad-footprint-generator +Stocko RFK MKS 16xx +0 +7 +7 +Connector_Stocko +Stocko_MKS_1658-6-0-808_1x8_P2.50mm_Vertical +Stocko MKS 16xx series connector, (https://www.stocko-contact.com/downloads/steckverbindersystem-raster-2,5-mm.pdf#page=15), generated with kicad-footprint-generator +Stocko RFK MKS 16xx +0 +8 +8 +Connector_Stocko +Stocko_MKS_1659-6-0-909_1x9_P2.50mm_Vertical +Stocko MKS 16xx series connector, (https://www.stocko-contact.com/downloads/steckverbindersystem-raster-2,5-mm.pdf#page=15), generated with kicad-footprint-generator +Stocko RFK MKS 16xx +0 +9 +9 +Connector_Stocko +Stocko_MKS_1660-6-0-1010_1x10_P2.50mm_Vertical +Stocko MKS 16xx series connector, (https://www.stocko-contact.com/downloads/steckverbindersystem-raster-2,5-mm.pdf#page=15), generated with kicad-footprint-generator +Stocko RFK MKS 16xx +0 +10 +10 +Connector_Stocko +Stocko_MKS_1661-6-0-1111_1x11_P2.50mm_Vertical +Stocko MKS 16xx series connector, (https://www.stocko-contact.com/downloads/steckverbindersystem-raster-2,5-mm.pdf#page=15), generated with kicad-footprint-generator +Stocko RFK MKS 16xx +0 +11 +11 +Connector_Stocko +Stocko_MKS_1662-6-0-1212_1x12_P2.50mm_Vertical +Stocko MKS 16xx series connector, (https://www.stocko-contact.com/downloads/steckverbindersystem-raster-2,5-mm.pdf#page=15), generated with kicad-footprint-generator +Stocko RFK MKS 16xx +0 +12 +12 +Connector_Stocko +Stocko_MKS_1663-6-0-1313_1x13_P2.50mm_Vertical +Stocko MKS 16xx series connector, (https://www.stocko-contact.com/downloads/steckverbindersystem-raster-2,5-mm.pdf#page=15), generated with kicad-footprint-generator +Stocko RFK MKS 16xx +0 +13 +13 +Connector_Stocko +Stocko_MKS_1664-6-0-1414_1x14_P2.50mm_Vertical +Stocko MKS 16xx series connector, (https://www.stocko-contact.com/downloads/steckverbindersystem-raster-2,5-mm.pdf#page=15), generated with kicad-footprint-generator +Stocko RFK MKS 16xx +0 +14 +14 +Connector_Stocko +Stocko_MKS_1665-6-0-1515_1x15_P2.50mm_Vertical +Stocko MKS 16xx series connector, (https://www.stocko-contact.com/downloads/steckverbindersystem-raster-2,5-mm.pdf#page=15), generated with kicad-footprint-generator +Stocko RFK MKS 16xx +0 +15 +15 +Connector_Stocko +Stocko_MKS_1666-6-0-1616_1x16_P2.50mm_Vertical +Stocko MKS 16xx series connector, (https://www.stocko-contact.com/downloads/steckverbindersystem-raster-2,5-mm.pdf#page=15), generated with kicad-footprint-generator +Stocko RFK MKS 16xx +0 +16 +16 +Connector_Stocko +Stocko_MKS_1667-6-0-1717_1x17_P2.50mm_Vertical +Stocko MKS 16xx series connector, (https://www.stocko-contact.com/downloads/steckverbindersystem-raster-2,5-mm.pdf#page=15), generated with kicad-footprint-generator +Stocko RFK MKS 16xx +0 +17 +17 +Connector_Stocko +Stocko_MKS_1668-6-0-1818_1x18_P2.50mm_Vertical +Stocko MKS 16xx series connector, (https://www.stocko-contact.com/downloads/steckverbindersystem-raster-2,5-mm.pdf#page=15), generated with kicad-footprint-generator +Stocko RFK MKS 16xx +0 +18 +18 +Connector_Stocko +Stocko_MKS_1669-6-0-1919_1x19_P2.50mm_Vertical +Stocko MKS 16xx series connector, (https://www.stocko-contact.com/downloads/steckverbindersystem-raster-2,5-mm.pdf#page=15), generated with kicad-footprint-generator +Stocko RFK MKS 16xx +0 +19 +19 +Connector_Stocko +Stocko_MKS_1670-6-0-2020_1x20_P2.50mm_Vertical +Stocko MKS 16xx series connector, (https://www.stocko-contact.com/downloads/steckverbindersystem-raster-2,5-mm.pdf#page=15), generated with kicad-footprint-generator +Stocko RFK MKS 16xx +0 +20 +20 +Connector_TE-Connectivity +TE_1-826576-3_1x13_P3.96mm_Vertical +TE, 1-826576-3, 13 Pins (https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=826576&DocType=Customer+Drawing&DocLang=English), generated with kicad-footprint-generator +connector TE 826576 vertical +0 +13 +13 +Connector_TE-Connectivity +TE_1-826576-5_1x15_P3.96mm_Vertical +TE, 1-826576-5, 15 Pins (https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=826576&DocType=Customer+Drawing&DocLang=English), generated with kicad-footprint-generator +connector TE 826576 vertical +0 +15 +15 +Connector_TE-Connectivity +TE_1-826576-6_1x16_P3.96mm_Vertical +TE, 1-826576-6, 16 Pins (https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=826576&DocType=Customer+Drawing&DocLang=English), generated with kicad-footprint-generator +connector TE 826576 vertical +0 +16 +16 +Connector_TE-Connectivity +TE_1-826576-7_1x17_P3.96mm_Vertical +TE, 1-826576-7, 17 Pins (https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=826576&DocType=Customer+Drawing&DocLang=English), generated with kicad-footprint-generator +connector TE 826576 vertical +0 +17 +17 +Connector_TE-Connectivity +TE_1-826576-8_1x18_P3.96mm_Vertical +TE, 1-826576-8, 18 Pins (https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=826576&DocType=Customer+Drawing&DocLang=English), generated with kicad-footprint-generator +connector TE 826576 vertical +0 +18 +18 +Connector_TE-Connectivity +TE_2-826576-0_1x20_P3.96mm_Vertical +TE, 2-826576-0, 20 Pins (https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=826576&DocType=Customer+Drawing&DocLang=English), generated with kicad-footprint-generator +connector TE 826576 vertical +0 +20 +20 +Connector_TE-Connectivity +TE_3-826576-6_1x36_P3.96mm_Vertical +TE, 3-826576-6, 36 Pins (https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=826576&DocType=Customer+Drawing&DocLang=English), generated with kicad-footprint-generator +connector TE 826576 vertical +0 +36 +36 +Connector_TE-Connectivity +TE_440054-2_1x02_P2.00mm_Vertical +TE Connectivity, HDI, Wire-to-Board, Fully Shrouded, Vertical Header: https://www.te.com/usa-en/product-440054-2.datasheet.pdf +connector header hdr horizontal vertical shrouded fully-shrounded 440054-2 2-440054-2 4-440054-2 6-440054-2 2-440054-6 4-440054-6 6-440054-6 +0 +2 +2 +Connector_TE-Connectivity +TE_440055-2_1x02_P2.00mm_Horizontal +TE Connectivity, HDI, Wire-to-Board, Fully Shrouded, Header: https://www.te.com/usa-en/product-440055-2.datasheet.pdf +connector header hdr horizontal right-angle shrouded fully-shrounded 440055-2 2-440055-2 4-440055-2 6-440055-2 8-440055-2 +0 +2 +2 +Connector_TE-Connectivity +TE_826576-2_1x02_P3.96mm_Vertical +TE, 826576-2, 2 Pins (https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=826576&DocType=Customer+Drawing&DocLang=English), generated with kicad-footprint-generator +connector TE 826576 vertical +0 +2 +2 +Connector_TE-Connectivity +TE_826576-3_1x03_P3.96mm_Vertical +TE, 826576-3, 3 Pins (https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=826576&DocType=Customer+Drawing&DocLang=English), generated with kicad-footprint-generator +connector TE 826576 vertical +0 +3 +3 +Connector_TE-Connectivity +TE_826576-5_1x05_P3.96mm_Vertical +TE, 826576-5, 5 Pins (https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=826576&DocType=Customer+Drawing&DocLang=English), generated with kicad-footprint-generator +connector TE 826576 vertical +0 +5 +5 +Connector_TE-Connectivity +TE_826576-6_1x06_P3.96mm_Vertical +TE, 826576-6, 6 Pins (https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=826576&DocType=Customer+Drawing&DocLang=English), generated with kicad-footprint-generator +connector TE 826576 vertical +0 +6 +6 +Connector_TE-Connectivity +TE_826576-7_1x07_P3.96mm_Vertical +TE, 826576-7, 7 Pins (https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=826576&DocType=Customer+Drawing&DocLang=English), generated with kicad-footprint-generator +connector TE 826576 vertical +0 +7 +7 +Connector_TE-Connectivity +TE_826576-8_1x08_P3.96mm_Vertical +TE, 826576-8, 8 Pins (https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=826576&DocType=Customer+Drawing&DocLang=English), generated with kicad-footprint-generator +connector TE 826576 vertical +0 +8 +8 +Connector_TE-Connectivity +TE_826576-9_1x09_P3.96mm_Vertical +TE, 826576-9, 9 Pins (https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=826576&DocType=Customer+Drawing&DocLang=English), generated with kicad-footprint-generator +connector TE 826576 vertical +0 +9 +9 +Connector_TE-Connectivity +TE_2834006-1_1x01_P4.0mm_Horizontal +TE Connectivity Buchanan WireMate connector, Poke-In series, 1-way, 4.0mm pitch, AWG18-22 (0.3255-0.823mm2), https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F2834006%7FB6%7Fpdf%7FEnglish%7FENG_CD_2834006_B6.pdf%7F2834006-1 +wire connector +0 +2 +1 +Connector_TE-Connectivity +TE_2834006-2_1x02_P4.0mm_Horizontal +TE Connectivity Buchanan WireMate connector, Poke-In series, 2-way, 4.0mm pitch, AWG18-22 (0.3255-0.823mm2), https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F2834006%7FB6%7Fpdf%7FEnglish%7FENG_CD_2834006_B6.pdf%7F2834006-1 +wire connector +0 +4 +2 +Connector_TE-Connectivity +TE_2834006-3_1x03_P4.0mm_Horizontal +TE Connectivity Buchanan WireMate connector, Poke-In series, 3-way, 4.0mm pitch, AWG18-22 (0.3255-0.823mm2), https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F2834006%7FB6%7Fpdf%7FEnglish%7FENG_CD_2834006_B6.pdf%7F2834006-1 +wire connector +0 +6 +3 +Connector_TE-Connectivity +TE_2834006-4_1x04_P4.0mm_Horizontal +TE Connectivity Buchanan WireMate connector, Poke-In series, 4-way, 4.0mm pitch, AWG18-22 (0.3255-0.823mm2), https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F2834006%7FB6%7Fpdf%7FEnglish%7FENG_CD_2834006_B6.pdf%7F2834006-1 +wire connector +0 +8 +4 +Connector_TE-Connectivity +TE_2834006-5_1x05_P4.0mm_Horizontal +TE Connectivity Buchanan WireMate connector, Poke-In series, 5-way, 4.0mm pitch, AWG18-22 (0.3255-0.823mm2), https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F2834006%7FB6%7Fpdf%7FEnglish%7FENG_CD_2834006_B6.pdf%7F2834006-1 +wire connector +0 +10 +5 +Connector_TE-Connectivity +TE_5767171-1_2x19_P0.635mm_Vertical +PCB Mount Receptacle, Vertical, Board-to-Board, 38 Position, 24.003mm / .64mm [.945in] Centerline, Header Only, Palladium Nickel (https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F5767171%7FB2%7Fpdf%7FEnglish%7FENG_CD_5767171_B2.pdf%7F5767171-1#page=2) +mictor38 receptacle board-to-board +0 +43 +39 +Connector_TE-Connectivity +TE_AMPSEAL_1-776087-x_3Rows_23_P0.4mm_Horizontal +Connector +TE 776087 +0 +23 +23 +Connector_TE-Connectivity +TE_MATE-N-LOK_1-770182-x_3x03_P4.14mm_Vertical +Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-770182-x, 3 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator +connector TE MATE-N-LOK side entry +0 +9 +9 +Connector_TE-Connectivity +TE_MATE-N-LOK_1-770186-x_3x04_P4.14mm_Vertical +Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-770186-x, 4 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator +connector TE MATE-N-LOK side entry +0 +12 +12 +Connector_TE-Connectivity +TE_MATE-N-LOK_1-770190-x_3x05_P4.14mm_Vertical +Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-770190-x, 5 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator +connector TE MATE-N-LOK side entry +0 +15 +15 +Connector_TE-Connectivity +TE_MATE-N-LOK_1-770621-x_2x06_P4.14mm_Vertical +Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-770621-x, 6 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator +connector TE MATE-N-LOK side entry +0 +12 +12 +Connector_TE-Connectivity +TE_MATE-N-LOK_1-770858-x_2x05_P4.14mm_Vertical +Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-770858-x, 5 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator +connector TE MATE-N-LOK side entry +0 +10 +10 +Connector_TE-Connectivity +TE_MATE-N-LOK_1-770866-x_1x02_P4.14mm_Vertical +Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-770866-x, 2 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator +connector TE MATE-N-LOK side entry +0 +2 +2 +Connector_TE-Connectivity +TE_MATE-N-LOK_1-770870-x_1x03_P4.14mm_Vertical +Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-770870-x, 3 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator +connector TE MATE-N-LOK side entry +0 +3 +3 +Connector_TE-Connectivity +TE_MATE-N-LOK_1-770874-x_2x02_P4.14mm_Vertical +Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-770874-x, 2 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator +connector TE MATE-N-LOK side entry +0 +4 +4 +Connector_TE-Connectivity +TE_MATE-N-LOK_1-770875-x_2x03_P4.14mm_Vertical +Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-770875-x, 3 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator +connector TE MATE-N-LOK side entry +0 +6 +6 +Connector_TE-Connectivity +TE_MATE-N-LOK_1-770966-x_1x02_P4.14mm_Horizontal +Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-770966-x, 2 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator +connector TE MATE-N-LOK top entry +0 +2 +2 +Connector_TE-Connectivity +TE_MATE-N-LOK_1-770967-x_1x03_P4.14mm_Horizontal +Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-770967-x, 3 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator +connector TE MATE-N-LOK top entry +0 +3 +3 +Connector_TE-Connectivity +TE_MATE-N-LOK_1-770968-x_2x02_P4.14mm_Horizontal +Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-770968-x, 2 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator +connector TE MATE-N-LOK top entry +0 +4 +4 +Connector_TE-Connectivity +TE_MATE-N-LOK_1-770969-x_2x03_P4.14mm_Horizontal +Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-770969-x, 3 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator +connector TE MATE-N-LOK top entry +0 +6 +6 +Connector_TE-Connectivity +TE_MATE-N-LOK_1-770970-x_2x04_P4.14mm_Horizontal +Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-770970-x, 4 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator +connector TE MATE-N-LOK top entry +0 +8 +8 +Connector_TE-Connectivity +TE_MATE-N-LOK_1-770971-x_2x05_P4.14mm_Horizontal +Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-770971-x, 5 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator +connector TE MATE-N-LOK top entry +0 +10 +10 +Connector_TE-Connectivity +TE_MATE-N-LOK_1-770972-x_2x06_P4.14mm_Horizontal +Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-770972-x, 6 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator +connector TE MATE-N-LOK top entry +0 +12 +12 +Connector_TE-Connectivity +TE_MATE-N-LOK_1-770973-x_2x07_P4.14mm_Horizontal +Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-770973-x, 7 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator +connector TE MATE-N-LOK top entry +0 +14 +14 +Connector_TE-Connectivity +TE_MATE-N-LOK_1-770974-x_2x08_P4.14mm_Horizontal +Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-770974-x, 8 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator +connector TE MATE-N-LOK top entry +0 +16 +16 +Connector_TE-Connectivity +TE_MATE-N-LOK_1-794067-x_2x07_P4.14mm_Vertical +Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-794067-x, 7 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator +connector TE MATE-N-LOK side entry +0 +14 +14 +Connector_TE-Connectivity +TE_MATE-N-LOK_1-794068-x_2x08_P4.14mm_Vertical +Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-794068-x, 8 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator +connector TE MATE-N-LOK side entry +0 +16 +16 +Connector_TE-Connectivity +TE_MATE-N-LOK_1-794069-x_2x09_P4.14mm_Vertical +Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-794069-x, 9 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator +connector TE MATE-N-LOK side entry +0 +18 +18 +Connector_TE-Connectivity +TE_MATE-N-LOK_1-794070-x_2x10_P4.14mm_Vertical +Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-794070-x, 10 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator +connector TE MATE-N-LOK side entry +0 +20 +20 +Connector_TE-Connectivity +TE_MATE-N-LOK_1-794071-x_2x11_P4.14mm_Vertical +Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-794071-x, 11 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator +connector TE MATE-N-LOK side entry +0 +22 +22 +Connector_TE-Connectivity +TE_MATE-N-LOK_1-794072-x_2x12_P4.14mm_Vertical +Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-794072-x, 12 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator +connector TE MATE-N-LOK side entry +0 +24 +24 +Connector_TE-Connectivity +TE_MATE-N-LOK_1-794073-x_2x04_P4.14mm_Vertical +Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-794073-x, 4 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator +connector TE MATE-N-LOK side entry +0 +8 +8 +Connector_TE-Connectivity +TE_MATE-N-LOK_1-794105-x_2x09_P4.14mm_Horizontal +Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-794105-x, 9 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator +connector TE MATE-N-LOK top entry +0 +18 +18 +Connector_TE-Connectivity +TE_MATE-N-LOK_1-794106-x_2x10_P4.14mm_Horizontal +Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-794106-x, 10 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator +connector TE MATE-N-LOK top entry +0 +20 +20 +Connector_TE-Connectivity +TE_MATE-N-LOK_1-794107-x_2x11_P4.14mm_Horizontal +Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-794107-x, 11 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator +connector TE MATE-N-LOK top entry +0 +22 +22 +Connector_TE-Connectivity +TE_MATE-N-LOK_1-794108-x_2x12_P4.14mm_Horizontal +Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-794108-x, 12 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator +connector TE MATE-N-LOK top entry +0 +24 +24 +Connector_TE-Connectivity +TE_MATE-N-LOK_1-794374-x_1x01_P4.14mm_Horizontal +Molex Mini-Universal MATE-N-LOK, old mpn/engineering number: 1-794374-x, 1 Pins per row (http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=82181_SOFTSHELL_HIGH_DENSITY&DocType=CS&DocLang=EN), generated with kicad-footprint-generator +connector TE MATE-N-LOK top entry +0 +1 +1 +Connector_TE-Connectivity +TE_MATE-N-LOK_350211-1_1x04_P5.08mm_Vertical +https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F350211%7FU5%7Fpdf%7FEnglish%7FENG_CD_350211_U5.pdf%7F350211-1 +connector TE MATE-N-LOK top entry ATA PATA IDE 5.25 inch floppy drive power +0 +4 +4 +Connector_TE-Connectivity +TE_Micro-MaTch_1-215079-0_2x05_P1.27mm_Vertical +TE-Connectivity Micro-MaTch female-on-board top-entry thru-hole 10 pin connector, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F215079%7FY1%7Fpdf%7FEnglish%7FENG_CD_215079_Y1.pdf%7F215079-4 +connector TE-Connectivity Micro-MaTch Vertical 1-215079-0 8-215079-10 +0 +10 +10 +Connector_TE-Connectivity +TE_Micro-MaTch_1-215079-2_2x06_P1.27mm_Vertical +TE-Connectivity Micro-MaTch female-on-board top-entry thru-hole 12 pin connector, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F215079%7FY1%7Fpdf%7FEnglish%7FENG_CD_215079_Y1.pdf%7F215079-4 +connector TE-Connectivity Micro-MaTch Vertical 1-215079-2 8-215079-12 +0 +12 +12 +Connector_TE-Connectivity +TE_Micro-MaTch_1-215079-4_2x07_P1.27mm_Vertical +TE-Connectivity Micro-MaTch female-on-board top-entry thru-hole 14 pin connector, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F215079%7FY1%7Fpdf%7FEnglish%7FENG_CD_215079_Y1.pdf%7F215079-4 +connector TE-Connectivity Micro-MaTch Vertical 1-215079-4 8-215079-14 +0 +14 +14 +Connector_TE-Connectivity +TE_Micro-MaTch_1-215079-6_2x08_P1.27mm_Vertical +TE-Connectivity Micro-MaTch female-on-board top-entry thru-hole 16 pin connector, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F215079%7FY1%7Fpdf%7FEnglish%7FENG_CD_215079_Y1.pdf%7F215079-4 +connector TE-Connectivity Micro-MaTch Vertical 1-215079-6 8-215079-16 +0 +16 +16 +Connector_TE-Connectivity +TE_Micro-MaTch_1-215079-8_2x09_P1.27mm_Vertical +TE-Connectivity Micro-MaTch female-on-board top-entry thru-hole 18 pin connector, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F215079%7FY1%7Fpdf%7FEnglish%7FENG_CD_215079_Y1.pdf%7F215079-4 +connector TE-Connectivity Micro-MaTch Vertical 1-215079-8 8-215079-18 +0 +18 +18 +Connector_TE-Connectivity +TE_Micro-MaTch_2-215079-0_2x10_P1.27mm_Vertical +TE-Connectivity Micro-MaTch female-on-board top-entry thru-hole 20 pin connector, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F215079%7FY1%7Fpdf%7FEnglish%7FENG_CD_215079_Y1.pdf%7F215079-4 +connector TE-Connectivity Micro-MaTch Vertical 2-215079-0 9-215079-20 +0 +20 +20 +Connector_TE-Connectivity +TE_Micro-MaTch_215079-4_2x02_P1.27mm_Vertical +TE-Connectivity Micro-MaTch female-on-board top-entry thru-hole 4 pin connector, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F215079%7FY1%7Fpdf%7FEnglish%7FENG_CD_215079_Y1.pdf%7F215079-4 +connector TE-Connectivity Micro-MaTch Vertical 215079-4 7-215079-4 +0 +4 +4 +Connector_TE-Connectivity +TE_Micro-MaTch_215079-6_2x03_P1.27mm_Vertical +TE-Connectivity Micro-MaTch female-on-board top-entry thru-hole 6 pin connector, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F215079%7FY1%7Fpdf%7FEnglish%7FENG_CD_215079_Y1.pdf%7F215079-4 +connector TE-Connectivity Micro-MaTch Vertical 215079-6 7-215079-6 +0 +6 +6 +Connector_TE-Connectivity +TE_Micro-MaTch_215079-8_2x04_P1.27mm_Vertical +TE-Connectivity Micro-MaTch female-on-board top-entry thru-hole 8 pin connector, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F215079%7FY1%7Fpdf%7FEnglish%7FENG_CD_215079_Y1.pdf%7F215079-4 +connector TE-Connectivity Micro-MaTch Vertical 215079-8 7-215079-8 +0 +8 +8 +Connector_TE-Connectivity +TE_T4041037031-000_M8_03_Socket_Straight +Shielded M8 socket 3 ways connector panel, straight and rear mount (https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7FT404103010X000%7FA%7Fpdf%7FEnglish%7FENG_CD_T404103010X000_A.pdf%7FT4041037041-000) +three-pin M8 +0 +5 +4 +Connector_TE-Connectivity +TE_T4041037041-000_M8_04_Socket_Straight +Shielded M8 socket 4 ways connector panel, straight and rear mount (https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7FT404103010X000%7FA%7Fpdf%7FEnglish%7FENG_CD_T404103010X000_A.pdf%7FT4041037041-000) +four-pin M8 +0 +6 +5 +Connector_USB +USB3_A_Molex_48393-001 +USB 3.0, type A, right angle, http://www.molex.com/pdm_docs/sd/483930003_sd.pdf +USB 3.0 type A right angle +0 +13 +10 +Connector_USB +USB3_A_Molex_48406-0001_Horizontal_Stacked +USB 3.0, type A, right angle, stacked (https://www.molex.com/content/dam/molex/molex-dot-com/products/automated/en-us/salesdrawingpdf/484/48406/484060001_sd.pdf) +USB 3.0 type A right angle stacked dual +0 +22 +19 +Connector_USB +USB3_A_Plug_Wuerth_692112030100_Horizontal +USB 3.0 Type A SMT Plug, Horizontal, https://www.we-online.com/components/products/datasheet/692112030100.pdf +usb A plug horizontal +0 +11 +10 +Connector_USB +USB3_A_Receptacle_Wuerth_692122030100 +USB 3.0, type A, right angle (https://www.we-online.com/katalog/datasheet/692122030100.pdf) +USB 3.0 type A right angle Würth +0 +11 +10 +Connector_USB +USB3_Micro-B_Connfly_DS1104-01 +Micro USB B receptable with flange, bottom-mount, SMD, right-angle (http://en.connfly.com/static/upload/file/pdf/DS1104-01.pdf) +USB 3.0 Micro B SMD right angle +0 +16 +11 +Connector_USB +USB_A_CNCTech_1001-011-01101_Horizontal +USB type A Plug, Horizontal, http://cnctech.us/pdfs/1001-011-01101.pdf +USB-A +0 +6 +5 +Connector_USB +USB_A_CONNFLY_DS1095-WNR0 +http://www.connfly.com/userfiles/image/UpLoadFile/File/2013/5/6/DS1095.pdf +USB-A receptacle horizontal through-hole +0 +6 +5 +Connector_USB +USB_A_CUI_UJ2-ADH-TH_Horizontal_Stacked +USB-A two stacked horizontal receptacle, through-hole (https://www.cuidevices.com/product/resource/uj2-adh-th.pdf) +USB-A CUI stacked horizontal through-hole +0 +12 +9 +Connector_USB +USB_A_Molex_48037-2200_Horizontal +USB type A Plug, Horizontal, https://www.molex.com/pdm_docs/sd/480372200_sd.pdf +USB-A +0 +6 +5 +Connector_USB +USB_A_Molex_67643_Horizontal +USB type A, Horizontal, https://www.molex.com/pdm_docs/sd/676433910_sd.pdf +USB_A Female Connector receptacle +0 +6 +5 +Connector_USB +USB_A_Molex_105057_Vertical +https://www.molex.com/pdm_docs/sd/1050570001_sd.pdf +USB A Vertical +0 +7 +5 +Connector_USB +USB_A_Receptacle_GCT_USB1046 +GCT USB1046, USB Type A, https://gct.co/files/drawings/usb1046.pdf +USB SMD Type-A Receptacle Right Angle +0 +8 +5 +Connector_USB +USB_A_Stewart_SS-52100-001_Horizontal +USB A connector https://belfuse.com/resources/drawings/stewartconnector/dr-stw-ss-52100-001.pdf +USB_A Female Connector receptacle +0 +6 +5 +Connector_USB +USB_A_TE_292303-7_Horizontal +USB type A, Horizontal, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=292303&DocType=Customer+Drawing&DocLang=English +USB_A Female Connector receptacle +0 +6 +5 +Connector_USB +USB_A_Wuerth_614004134726_Horizontal +USB A connector https://www.we-online.com/catalog/datasheet/614004134726.pdf +USB_A Female Connector receptacle +0 +8 +5 +Connector_USB +USB_A_Wuerth_61400826021_Horizontal_Stacked +Stacked USB A connector http://katalog.we-online.de/em/datasheet/61400826021.pdf +Wuerth stacked USB_A +0 +12 +9 +Connector_USB +USB_B_Amphenol_MUSB-D511_Vertical_Rugged +A,phenol MUSB_D511, USB B female connector, straight, rugged, https://www.amphenolcanada.com/ProductSearch/drawings/AC/MUSBD511XX.pdf +USB_B_MUSB_Straight female connector straight rugged MUSB D511 +0 +6 +5 +Connector_USB +USB_B_Lumberg_2411_02_Horizontal +USB 2.0 receptacle type B, horizontal version, through-hole, https://downloads.lumberg.com/datenblaetter/en/2411_02.pdf +USB B receptacle horizontal through-hole +0 +6 +5 +Connector_USB +USB_B_OST_USB-B1HSxx_Horizontal +USB B receptacle, Horizontal, through-hole, http://www.on-shore.com/wp-content/uploads/2015/09/usb-b1hsxx.pdf +USB-B receptacle horizontal through-hole +0 +6 +5 +Connector_USB +USB_B_TE_5787834_Vertical +http://www.mouser.com/ds/2/418/NG_CD_5787834_A4-669110.pdf +USB_B USB B vertical female connector +0 +6 +5 +Connector_USB +USB_C_Plug_JAE_DX07P024AJ1 +Universal Serial Bus (USB) Shielded I/O Plug, Type C, Right Angle, Surface Mount, https://www.jae.com/en/searchfilter/?topics_keyword=DX07P024AJ1&mainItemSelect=1 +USB Type-C Plug Edge Mount +0 +30 +25 +Connector_USB +USB_C_Plug_Molex_105444 +Universal Serial Bus (USB) Shielded I/O Plug, Type C, Right Angle, Surface Mount, http://www.molex.com/pdm_docs/sd/1054440001_sd.pdf +USB Type-C Plug Edge Mount +0 +24 +23 +Connector_USB +USB_C_Plug_ShenzhenJingTuoJin_918-118A2021Y40002_Vertical +Low-profile vertical USB 2.0 Type C Plug Shenzhen Jing Tuo Jin Electronics Co 918-118A2021Y40002 ( https://datasheet.lcsc.com/lcsc/1912111437_Jing-Extension-of-the-Electronic-Co--918-118A2021Y40002_C399939.pdf ) also compatible with Korean HRO Parts Elec TYPE-C-31-G-06 +type-c usb2 +0 +18 +17 +Connector_USB +USB_C_Receptacle_Amphenol_12401548E4-2A +USB TYPE C, RA RCPT PCB, Hybrid, https://www.amphenolcanada.com/StockAvailabilityPrice.aspx?From=&PartNum=12401548E4%7e2A +USB C Type-C Receptacle Hybrid +0 +28 +25 +Connector_USB +USB_C_Receptacle_Amphenol_12401548E4-2A_CircularHoles +USB TYPE C, RA RCPT PCB, Hybrid, https://www.amphenolcanada.com/StockAvailabilityPrice.aspx?From=&PartNum=12401548E4%7e2A +USB C Type-C Receptacle Hybrid +0 +28 +25 +Connector_USB +USB_C_Receptacle_Amphenol_12401610E4-2A +USB TYPE C, RA RCPT PCB, SMT, https://www.amphenolcanada.com/StockAvailabilityPrice.aspx?From=&PartNum=12401610E4%7e2A +USB C Type-C Receptacle SMD +0 +28 +25 +Connector_USB +USB_C_Receptacle_Amphenol_12401610E4-2A_CircularHoles +USB TYPE C, RA RCPT PCB, SMT, https://www.amphenolcanada.com/StockAvailabilityPrice.aspx?From=&PartNum=12401610E4%7e2A +USB C Type-C Receptacle SMD +0 +28 +25 +Connector_USB +USB_C_Receptacle_CNCTech_C-ARA1-AK51X +USB Type-C 3.0 Receptacle, 24-pin, right angle (source: https://www.cnctech.us/pdfs/C-ARA1-AK512.pdf) +USB C Type-C Receptacle Hybrid CNCTech C-ARA1-AK51X +0 +32 +25 +Connector_USB +USB_C_Receptacle_G-Switch_GT-USB-7010ASV +USB Type C, right-angle, SMT, https://datasheet.lcsc.com/lcsc/2204071530_G-Switch-GT-USB-7010ASV_C2988369.pdf +USB C Type-C Receptacle SMD +0 +20 +17 +Connector_USB +USB_C_Receptacle_G-Switch_GT-USB-7051x +USB Type C, vertical, SMT, https://datasheet.lcsc.com/lcsc/2108072030_G-Switch-GT-USB-7051A_C2843970.pdf +USB C Type-C Receptacle SMD GT-USB-7051A GT-USB-7051B +0 +20 +17 +Connector_USB +USB_C_Receptacle_GCT_USB4085 +USB 2.0 Type C Receptacle, https://gct.co/Files/Drawings/USB4085.pdf +USB Type-C Receptacle Through-hole Right angle +0 +20 +17 +Connector_USB +USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal +USB 2.0 Type C Receptacle, GCT, 16P, top mounted, horizontal, 5A: https://gct.co/files/drawings/usb4105.pdf +USB C Type-C Receptacle SMD USB 2.0 16P 16C USB4105-15-A USB4105-15-A-060 USB4105-15-A-120 USB4105-GF-A USB4105-GF-A-060 USB4105-GF-A-120 +0 +20 +17 +Connector_USB +USB_C_Receptacle_GCT_USB4110 +USB 2.0 Type C Receptacle, GCT, 16P, top mounted, horizontal, 5A, https://gct.co/files/drawings/usb4110.pdf +USB 2.0 C Type-C Receptacle SMD 16P 16C USB4110-GF-A +0 +20 +17 +Connector_USB +USB_C_Receptacle_GCT_USB4115-03-C +USB TYPE C, VERT RCPT PCB, SMT, https://gct.co/files/drawings/usb4115.pdf +USB C Type-C Receptacle SMD +0 +28 +25 +Connector_USB +USB_C_Receptacle_GCT_USB4125-xx-x-0190_6P_TopMnt_Horizontal +USB Type C Receptacle, GCT, power-only, 6P, top mounted, horizontal, 3A, 1.9mm stake: https://gct.co/files/drawings/usb4125.pdf +USB C Type-C receptacle power-only charging-only 6P 6C right angled +0 +10 +7 +Connector_USB +USB_C_Receptacle_GCT_USB4125-xx-x_6P_TopMnt_Horizontal +USB Type C Receptacle, GCT, power-only, 6P, top mounted, horizontal, 3A, 1mm stake: https://gct.co/files/drawings/usb4125.pdf +USB C Type-C receptacle power-only charging-only 6P 6C right angled +0 +10 +7 +Connector_USB +USB_C_Receptacle_GCT_USB4135-GF-A_6P_TopMnt_Horizontal +USB Type C Receptacle, GCT, power-only, 6P, top mounted, horizontal, 3A: https://gct.co/files/drawings/usb4135.pdf +USB C Type-C Receptacle SMD USB Power-only Charging-only 6P 6C USB4135-GF-A +0 +10 +7 +Connector_USB +USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01A +16-pin USB-C receptacle, USB2.0 and PD, 5A VBUS rating, https://datasheet.lcsc.com/lcsc/2211161000_HCTL-HC-TYPE-C-16P-01A_C2894897.pdf +usb usb-c 2.0 pd +0 +20 +17 +Connector_USB +USB_C_Receptacle_HRO_TYPE-C-31-M-12 +USB Type-C receptacle for USB 2.0 and PD, http://www.krhro.com/uploads/soft/180320/1-1P320120243.pdf +usb usb-c 2.0 pd +0 +20 +17 +Connector_USB +USB_C_Receptacle_JAE_DX07S016JA1R1500 +USB TYPE C, USB 2.0, SMT, https://www.jae.com/en/connectors/series/detail/product/id=91780 +USB C Type-C Receptacle SMD USB 2.0 +0 +22 +17 +Connector_USB +USB_C_Receptacle_JAE_DX07S024WJ1R350 +http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ117219.pdf +USB C Type-C Receptacle SMD +0 +30 +25 +Connector_USB +USB_C_Receptacle_JAE_DX07S024WJ3R400 +USB TYPE C, VERT RCPT PCB, SMT, http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ117928.pdf +USB C Type-C Receptacle SMD +0 +28 +25 +Connector_USB +USB_C_Receptacle_Molex_105450-0101 +USB 3.0 3.1 3.2 4.0 Type-C receptable, through-hole mount, SMD, right-angle (https://www.molex.com/pdm_docs/sd/1054500101_sd.pdf) +USB C Type-C USB3 receptacle SMD +0 +28 +25 +Connector_USB +USB_C_Receptacle_Palconn_UTC16-G +http://www.palpilot.com/wp-content/uploads/2017/05/UTC027-GKN-OR-Rev-A.pdf +USB C Type-C Receptacle USB2.0 +0 +20 +17 +Connector_USB +USB_C_Receptacle_XKB_U262-16XN-4BVC11 +USB Type C, right-angle, SMT, https://datasheet.lcsc.com/szlcsc/1811141824_XKB-Enterprise-U262-161N-4BVC11_C319148.pdf +USB C Type-C Receptacle SMD +0 +20 +17 +Connector_USB +USB_Micro-AB_Molex_47590-0001 +Micro USB AB receptable, right-angle inverted (https://www.molex.com/pdm_docs/sd/475900001_sd.pdf) +Micro AB USB SMD +0 +14 +6 +Connector_USB +USB_Micro-B_Amphenol_10103594-0001LF_Horizontal +Micro USB Type B 10103594-0001LF, http://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/10103594.pdf +USB USB_B USB_micro USB_OTG +0 +17 +6 +Connector_USB +USB_Micro-B_Amphenol_10104110_Horizontal +USB Micro-B, horizontal, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/10104110.pdf +USB Micro B horizontal +0 +9 +6 +Connector_USB +USB_Micro-B_Amphenol_10118193-0001LF_Horizontal +USB Micro-B receptacle, horizontal, SMD, 10118193, with flange, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/10118193.pdf +USB Micro-B horizontal SMD +0 +11 +6 +Connector_USB +USB_Micro-B_Amphenol_10118193-0002LF_Horizontal +USB Micro-B receptacle, horizontal, SMD, 10118193, without flange, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/10118193.pdf +USB Micro-B horizontal SMD +0 +11 +6 +Connector_USB +USB_Micro-B_Amphenol_10118194_Horizontal +USB Micro-B receptacle, horizontal, SMD, 10118194, https://cdn.amphenol-icc.com/media/wysiwyg/files/drawing/10118194.pdf +USB Micro B horizontal SMD +0 +17 +6 +Connector_USB +USB_Micro-B_GCT_USB3076-30-A +GCT Micro USB https://gct.co/files/drawings/usb3076.pdf +Micro-USB SMD Typ-B GCT +0 +11 +6 +Connector_USB +USB_Micro-B_Molex-105017-0001 +http://www.molex.com/pdm_docs/sd/1050170001_sd.pdf +Micro-USB SMD Typ-B +0 +13 +6 +Connector_USB +USB_Micro-B_Molex-105133-0001 +Molex Vertical Micro USB Typ-B (http://www.molex.com/pdm_docs/sd/1051330001_sd.pdf) +Micro-USB SMD Typ-B Vertical +0 +8 +6 +Connector_USB +USB_Micro-B_Molex-105133-0031 +Molex Vertical Micro USB Typ-B (http://www.molex.com/pdm_docs/sd/1051330031_sd.pdf) +Micro-USB SMD Typ-B Vertical +0 +8 +6 +Connector_USB +USB_Micro-B_Molex_47346-0001 +Micro USB B receptable with flange, bottom-mount, SMD, right-angle (http://www.molex.com/pdm_docs/sd/473460001_sd.pdf) +Micro B USB SMD +0 +11 +6 +Connector_USB +USB_Micro-B_Technik_TWP-4002D-H3 +Dustproof Micro USB Type B TWP-4002D-H3, https://www.technik.com.hk/images/pdf_product/WP4002D-H3-A_2.0.pdf +USB Micro B horizontal dustproof waterproof IP67 +0 +7 +6 +Connector_USB +USB_Micro-B_Wuerth_614105150721_Vertical +USB Micro-B receptacle, through-hole, vertical, http://katalog.we-online.de/em/datasheet/614105150721.pdf +usb micro receptacle vertical +0 +7 +6 +Connector_USB +USB_Micro-B_Wuerth_614105150721_Vertical_CircularHoles +USB Micro-B receptacle, through-hole, vertical, http://katalog.we-online.de/em/datasheet/614105150721.pdf +usb micro receptacle vertical +0 +7 +6 +Connector_USB +USB_Micro-B_Wuerth_629105150521 +USB Micro-B receptacle, http://www.mouser.com/ds/2/445/629105150521-469306.pdf +usb micro receptacle +0 +9 +6 +Connector_USB +USB_Micro-B_Wuerth_629105150521_CircularHoles +USB Micro-B receptacle, http://www.mouser.com/ds/2/445/629105150521-469306.pdf +usb micro receptacle +0 +9 +6 +Connector_USB +USB_Micro-B_XKB_U254-051T-4BH83-F1S +XKB Connectivity, USB Micro-B, right-angle, SMT, https://datasheet.lcsc.com/lcsc/2206091745_XKB-Connectivity-U254-051T-4BH83-F1S_C397452.pdf +USB Micro-B Receptacle SMD +0 +11 +6 +Connector_USB +USB_Mini-B_AdamTech_MUSB-B5-S-VT-TSMT-1_SMD_Vertical +http://www.adam-tech.com/upload/MUSB-B5-S-VT-TSMT-1.pdf +USB Mini-B +0 +7 +6 +Connector_USB +USB_Mini-B_Lumberg_2486_01_Horizontal +USB Mini-B 5-pin SMD connector, http://downloads.lumberg.com/datenblaetter/en/2486_01.pdf +USB USB_B USB_Mini connector +0 +9 +6 +Connector_USB +USB_Mini-B_Tensility_54-00023_Vertical +http://www.tensility.com/pdffiles/54-00023.pdf +usb mini receptacle vertical +0 +7 +6 +Connector_USB +USB_Mini-B_Tensility_54-00023_Vertical_CircularHoles +http://www.tensility.com/pdffiles/54-00023.pdf +usb mini receptacle vertical +0 +7 +6 +Connector_USB +USB_Mini-B_Wuerth_65100516121_Horizontal +Mini USB 2.0 Type B SMT Horizontal 5 Contacts (https://katalog.we-online.de/em/datasheet/65100516121.pdf) +Mini USB 2.0 Type B +0 +9 +6 +Connector_Wago +Wago_734-132_1x02_P3.50mm_Vertical +Molex 734 Male header (for PCBs); Straight solder pin 1 x 1 mm, 734-132 , 2 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator +connector Wago side entry +0 +2 +2 +Connector_Wago +Wago_734-133_1x03_P3.50mm_Vertical +Molex 734 Male header (for PCBs); Straight solder pin 1 x 1 mm, 734-133 , 3 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator +connector Wago side entry +0 +3 +3 +Connector_Wago +Wago_734-134_1x04_P3.50mm_Vertical +Molex 734 Male header (for PCBs); Straight solder pin 1 x 1 mm, 734-134 , 4 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator +connector Wago side entry +0 +4 +4 +Connector_Wago +Wago_734-135_1x05_P3.50mm_Vertical +Molex 734 Male header (for PCBs); Straight solder pin 1 x 1 mm, 734-135 , 5 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator +connector Wago side entry +0 +5 +5 +Connector_Wago +Wago_734-136_1x06_P3.50mm_Vertical +Molex 734 Male header (for PCBs); Straight solder pin 1 x 1 mm, 734-136 , 6 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator +connector Wago side entry +0 +6 +6 +Connector_Wago +Wago_734-137_1x07_P3.50mm_Vertical +Molex 734 Male header (for PCBs); Straight solder pin 1 x 1 mm, 734-137 , 7 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator +connector Wago side entry +0 +7 +7 +Connector_Wago +Wago_734-138_1x08_P3.50mm_Vertical +Molex 734 Male header (for PCBs); Straight solder pin 1 x 1 mm, 734-138 , 8 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator +connector Wago side entry +0 +8 +8 +Connector_Wago +Wago_734-139_1x09_P3.50mm_Vertical +Molex 734 Male header (for PCBs); Straight solder pin 1 x 1 mm, 734-139 , 9 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator +connector Wago side entry +0 +9 +9 +Connector_Wago +Wago_734-140_1x10_P3.50mm_Vertical +Molex 734 Male header (for PCBs); Straight solder pin 1 x 1 mm, 734-140 , 10 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator +connector Wago side entry +0 +10 +10 +Connector_Wago +Wago_734-141_1x11_P3.50mm_Vertical +Molex 734 Male header (for PCBs); Straight solder pin 1 x 1 mm, 734-141 , 11 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator +connector Wago side entry +0 +11 +11 +Connector_Wago +Wago_734-142_1x12_P3.50mm_Vertical +Molex 734 Male header (for PCBs); Straight solder pin 1 x 1 mm, 734-142 , 12 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator +connector Wago side entry +0 +12 +12 +Connector_Wago +Wago_734-143_1x13_P3.50mm_Vertical +Molex 734 Male header (for PCBs); Straight solder pin 1 x 1 mm, 734-143 , 13 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator +connector Wago side entry +0 +13 +13 +Connector_Wago +Wago_734-144_1x14_P3.50mm_Vertical +Molex 734 Male header (for PCBs); Straight solder pin 1 x 1 mm, 734-144 , 14 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator +connector Wago side entry +0 +14 +14 +Connector_Wago +Wago_734-146_1x16_P3.50mm_Vertical +Molex 734 Male header (for PCBs); Straight solder pin 1 x 1 mm, 734-146 , 16 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator +connector Wago side entry +0 +16 +16 +Connector_Wago +Wago_734-148_1x18_P3.50mm_Vertical +Molex 734 Male header (for PCBs); Straight solder pin 1 x 1 mm, 734-148 , 18 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator +connector Wago side entry +0 +18 +18 +Connector_Wago +Wago_734-150_1x20_P3.50mm_Vertical +Molex 734 Male header (for PCBs); Straight solder pin 1 x 1 mm, 734-150 , 20 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator +connector Wago side entry +0 +20 +20 +Connector_Wago +Wago_734-154_1x24_P3.50mm_Vertical +Molex 734 Male header (for PCBs); Straight solder pin 1 x 1 mm, 734-154 , 24 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator +connector Wago side entry +0 +24 +24 +Connector_Wago +Wago_734-162_1x02_P3.50mm_Horizontal +Molex 734 Male header (for PCBs); Angled solder pin 1 x 1 mm, 734-162 , 2 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator +connector Wago top entry +0 +2 +2 +Connector_Wago +Wago_734-163_1x03_P3.50mm_Horizontal +Molex 734 Male header (for PCBs); Angled solder pin 1 x 1 mm, 734-163 , 3 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator +connector Wago top entry +0 +3 +3 +Connector_Wago +Wago_734-164_1x04_P3.50mm_Horizontal +Molex 734 Male header (for PCBs); Angled solder pin 1 x 1 mm, 734-164 , 4 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator +connector Wago top entry +0 +4 +4 +Connector_Wago +Wago_734-165_1x05_P3.50mm_Horizontal +Molex 734 Male header (for PCBs); Angled solder pin 1 x 1 mm, 734-165 , 5 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator +connector Wago top entry +0 +5 +5 +Connector_Wago +Wago_734-166_1x06_P3.50mm_Horizontal +Molex 734 Male header (for PCBs); Angled solder pin 1 x 1 mm, 734-166 , 6 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator +connector Wago top entry +0 +6 +6 +Connector_Wago +Wago_734-167_1x07_P3.50mm_Horizontal +Molex 734 Male header (for PCBs); Angled solder pin 1 x 1 mm, 734-167 , 7 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator +connector Wago top entry +0 +7 +7 +Connector_Wago +Wago_734-168_1x08_P3.50mm_Horizontal +Molex 734 Male header (for PCBs); Angled solder pin 1 x 1 mm, 734-168 , 8 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator +connector Wago top entry +0 +8 +8 +Connector_Wago +Wago_734-169_1x09_P3.50mm_Horizontal +Molex 734 Male header (for PCBs); Angled solder pin 1 x 1 mm, 734-169 , 9 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator +connector Wago top entry +0 +9 +9 +Connector_Wago +Wago_734-170_1x10_P3.50mm_Horizontal +Molex 734 Male header (for PCBs); Angled solder pin 1 x 1 mm, 734-170 , 10 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator +connector Wago top entry +0 +10 +10 +Connector_Wago +Wago_734-171_1x11_P3.50mm_Horizontal +Molex 734 Male header (for PCBs); Angled solder pin 1 x 1 mm, 734-171 , 11 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator +connector Wago top entry +0 +11 +11 +Connector_Wago +Wago_734-172_1x12_P3.50mm_Horizontal +Molex 734 Male header (for PCBs); Angled solder pin 1 x 1 mm, 734-172 , 12 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator +connector Wago top entry +0 +12 +12 +Connector_Wago +Wago_734-173_1x13_P3.50mm_Horizontal +Molex 734 Male header (for PCBs); Angled solder pin 1 x 1 mm, 734-173 , 13 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator +connector Wago top entry +0 +13 +13 +Connector_Wago +Wago_734-174_1x14_P3.50mm_Horizontal +Molex 734 Male header (for PCBs); Angled solder pin 1 x 1 mm, 734-174 , 14 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator +connector Wago top entry +0 +14 +14 +Connector_Wago +Wago_734-176_1x16_P3.50mm_Horizontal +Molex 734 Male header (for PCBs); Angled solder pin 1 x 1 mm, 734-176 , 16 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator +connector Wago top entry +0 +16 +16 +Connector_Wago +Wago_734-178_1x18_P3.50mm_Horizontal +Molex 734 Male header (for PCBs); Angled solder pin 1 x 1 mm, 734-178 , 18 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator +connector Wago top entry +0 +18 +18 +Connector_Wago +Wago_734-180_1x20_P3.50mm_Horizontal +Molex 734 Male header (for PCBs); Angled solder pin 1 x 1 mm, 734-180 , 20 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator +connector Wago top entry +0 +20 +20 +Connector_Wago +Wago_734-184_1x24_P3.50mm_Horizontal +Molex 734 Male header (for PCBs); Angled solder pin 1 x 1 mm, 734-184 , 24 Pins (http://www.farnell.com/datasheets/2157639.pdf), generated with kicad-footprint-generator +connector Wago top entry +0 +24 +24 +Connector_Wire +SolderWire-0.1sqmm_1x01_D0.4mm_OD1mm +Soldered wire connection, for a single 0.1 mm² wire, basic insulation, conductor diameter 0.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.1 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.1sqmm +0 +1 +1 +Connector_Wire +SolderWire-0.1sqmm_1x01_D0.4mm_OD1mm_Relief +Soldered wire connection with feed through strain relief, for a single 0.1 mm² wire, basic insulation, conductor diameter 0.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.1 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.1sqmm strain-relief +0 +1 +1 +Connector_Wire +SolderWire-0.1sqmm_1x01_D0.4mm_OD1mm_Relief2x +Soldered wire connection with double feed through strain relief, for a single 0.1 mm² wire, basic insulation, conductor diameter 0.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.1 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.1sqmm double-strain-relief +0 +1 +1 +Connector_Wire +SolderWire-0.1sqmm_1x02_P3.6mm_D0.4mm_OD1mm +Soldered wire connection, for 2 times 0.1 mm² wires, basic insulation, conductor diameter 0.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.1 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.1sqmm +0 +2 +2 +Connector_Wire +SolderWire-0.1sqmm_1x02_P3.6mm_D0.4mm_OD1mm_Relief +Soldered wire connection with feed through strain relief, for 2 times 0.1 mm² wires, basic insulation, conductor diameter 0.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.1 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.1sqmm strain-relief +0 +2 +2 +Connector_Wire +SolderWire-0.1sqmm_1x02_P3.6mm_D0.4mm_OD1mm_Relief2x +Soldered wire connection with double feed through strain relief, for 2 times 0.1 mm² wires, basic insulation, conductor diameter 0.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.1 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.1sqmm double-strain-relief +0 +2 +2 +Connector_Wire +SolderWire-0.1sqmm_1x03_P3.6mm_D0.4mm_OD1mm +Soldered wire connection, for 3 times 0.1 mm² wires, basic insulation, conductor diameter 0.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.1 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.1sqmm +0 +3 +3 +Connector_Wire +SolderWire-0.1sqmm_1x03_P3.6mm_D0.4mm_OD1mm_Relief +Soldered wire connection with feed through strain relief, for 3 times 0.1 mm² wires, basic insulation, conductor diameter 0.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.1 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.1sqmm strain-relief +0 +3 +3 +Connector_Wire +SolderWire-0.1sqmm_1x03_P3.6mm_D0.4mm_OD1mm_Relief2x +Soldered wire connection with double feed through strain relief, for 3 times 0.1 mm² wires, basic insulation, conductor diameter 0.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.1 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.1sqmm double-strain-relief +0 +3 +3 +Connector_Wire +SolderWire-0.1sqmm_1x04_P3.6mm_D0.4mm_OD1mm +Soldered wire connection, for 4 times 0.1 mm² wires, basic insulation, conductor diameter 0.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.1 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.1sqmm +0 +4 +4 +Connector_Wire +SolderWire-0.1sqmm_1x04_P3.6mm_D0.4mm_OD1mm_Relief +Soldered wire connection with feed through strain relief, for 4 times 0.1 mm² wires, basic insulation, conductor diameter 0.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.1 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.1sqmm strain-relief +0 +4 +4 +Connector_Wire +SolderWire-0.1sqmm_1x04_P3.6mm_D0.4mm_OD1mm_Relief2x +Soldered wire connection with double feed through strain relief, for 4 times 0.1 mm² wires, basic insulation, conductor diameter 0.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.1 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.1sqmm double-strain-relief +0 +4 +4 +Connector_Wire +SolderWire-0.1sqmm_1x05_P3.6mm_D0.4mm_OD1mm +Soldered wire connection, for 5 times 0.1 mm² wires, basic insulation, conductor diameter 0.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.1 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.1sqmm +0 +5 +5 +Connector_Wire +SolderWire-0.1sqmm_1x05_P3.6mm_D0.4mm_OD1mm_Relief +Soldered wire connection with feed through strain relief, for 5 times 0.1 mm² wires, basic insulation, conductor diameter 0.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.1 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.1sqmm strain-relief +0 +5 +5 +Connector_Wire +SolderWire-0.1sqmm_1x05_P3.6mm_D0.4mm_OD1mm_Relief2x +Soldered wire connection with double feed through strain relief, for 5 times 0.1 mm² wires, basic insulation, conductor diameter 0.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.1 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.1sqmm double-strain-relief +0 +5 +5 +Connector_Wire +SolderWire-0.1sqmm_1x06_P3.6mm_D0.4mm_OD1mm +Soldered wire connection, for 6 times 0.1 mm² wires, basic insulation, conductor diameter 0.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.1 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.1sqmm +0 +6 +6 +Connector_Wire +SolderWire-0.1sqmm_1x06_P3.6mm_D0.4mm_OD1mm_Relief +Soldered wire connection with feed through strain relief, for 6 times 0.1 mm² wires, basic insulation, conductor diameter 0.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.1 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.1sqmm strain-relief +0 +6 +6 +Connector_Wire +SolderWire-0.1sqmm_1x06_P3.6mm_D0.4mm_OD1mm_Relief2x +Soldered wire connection with double feed through strain relief, for 6 times 0.1 mm² wires, basic insulation, conductor diameter 0.4mm, outer diameter 1mm, size source Multi-Contact FLEXI-E 0.1 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.1sqmm double-strain-relief +0 +6 +6 +Connector_Wire +SolderWire-0.5sqmm_1x01_D0.9mm_OD2.1mm +Soldered wire connection, for a single 0.5 mm² wire, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.5sqmm +0 +1 +1 +Connector_Wire +SolderWire-0.5sqmm_1x01_D0.9mm_OD2.1mm_Relief +Soldered wire connection with feed through strain relief, for a single 0.5 mm² wire, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.5sqmm strain-relief +0 +1 +1 +Connector_Wire +SolderWire-0.5sqmm_1x01_D0.9mm_OD2.1mm_Relief2x +Soldered wire connection with double feed through strain relief, for a single 0.5 mm² wire, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.5sqmm double-strain-relief +0 +1 +1 +Connector_Wire +SolderWire-0.5sqmm_1x01_D0.9mm_OD2.3mm +Soldered wire connection, for a single 0.5 mm² wire, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.5sqmm +0 +1 +1 +Connector_Wire +SolderWire-0.5sqmm_1x01_D0.9mm_OD2.3mm_Relief +Soldered wire connection with feed through strain relief, for a single 0.5 mm² wire, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.5sqmm strain-relief +0 +1 +1 +Connector_Wire +SolderWire-0.5sqmm_1x01_D0.9mm_OD2.3mm_Relief2x +Soldered wire connection with double feed through strain relief, for a single 0.5 mm² wire, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.5sqmm double-strain-relief +0 +1 +1 +Connector_Wire +SolderWire-0.5sqmm_1x02_P4.6mm_D0.9mm_OD2.1mm +Soldered wire connection, for 2 times 0.5 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.5sqmm +0 +2 +2 +Connector_Wire +SolderWire-0.5sqmm_1x02_P4.6mm_D0.9mm_OD2.1mm_Relief +Soldered wire connection with feed through strain relief, for 2 times 0.5 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.5sqmm strain-relief +0 +2 +2 +Connector_Wire +SolderWire-0.5sqmm_1x02_P4.6mm_D0.9mm_OD2.1mm_Relief2x +Soldered wire connection with double feed through strain relief, for 2 times 0.5 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.5sqmm double-strain-relief +0 +2 +2 +Connector_Wire +SolderWire-0.5sqmm_1x02_P4.8mm_D0.9mm_OD2.3mm +Soldered wire connection, for 2 times 0.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.5sqmm +0 +2 +2 +Connector_Wire +SolderWire-0.5sqmm_1x02_P4.8mm_D0.9mm_OD2.3mm_Relief +Soldered wire connection with feed through strain relief, for 2 times 0.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.5sqmm strain-relief +0 +2 +2 +Connector_Wire +SolderWire-0.5sqmm_1x02_P4.8mm_D0.9mm_OD2.3mm_Relief2x +Soldered wire connection with double feed through strain relief, for 2 times 0.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.5sqmm double-strain-relief +0 +2 +2 +Connector_Wire +SolderWire-0.5sqmm_1x03_P4.6mm_D0.9mm_OD2.1mm +Soldered wire connection, for 3 times 0.5 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.5sqmm +0 +3 +3 +Connector_Wire +SolderWire-0.5sqmm_1x03_P4.6mm_D0.9mm_OD2.1mm_Relief +Soldered wire connection with feed through strain relief, for 3 times 0.5 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.5sqmm strain-relief +0 +3 +3 +Connector_Wire +SolderWire-0.5sqmm_1x03_P4.6mm_D0.9mm_OD2.1mm_Relief2x +Soldered wire connection with double feed through strain relief, for 3 times 0.5 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.5sqmm double-strain-relief +0 +3 +3 +Connector_Wire +SolderWire-0.5sqmm_1x03_P4.8mm_D0.9mm_OD2.3mm +Soldered wire connection, for 3 times 0.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.5sqmm +0 +3 +3 +Connector_Wire +SolderWire-0.5sqmm_1x03_P4.8mm_D0.9mm_OD2.3mm_Relief +Soldered wire connection with feed through strain relief, for 3 times 0.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.5sqmm strain-relief +0 +3 +3 +Connector_Wire +SolderWire-0.5sqmm_1x03_P4.8mm_D0.9mm_OD2.3mm_Relief2x +Soldered wire connection with double feed through strain relief, for 3 times 0.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.5sqmm double-strain-relief +0 +3 +3 +Connector_Wire +SolderWire-0.5sqmm_1x04_P4.6mm_D0.9mm_OD2.1mm +Soldered wire connection, for 4 times 0.5 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.5sqmm +0 +4 +4 +Connector_Wire +SolderWire-0.5sqmm_1x04_P4.6mm_D0.9mm_OD2.1mm_Relief +Soldered wire connection with feed through strain relief, for 4 times 0.5 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.5sqmm strain-relief +0 +4 +4 +Connector_Wire +SolderWire-0.5sqmm_1x04_P4.6mm_D0.9mm_OD2.1mm_Relief2x +Soldered wire connection with double feed through strain relief, for 4 times 0.5 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.5sqmm double-strain-relief +0 +4 +4 +Connector_Wire +SolderWire-0.5sqmm_1x04_P4.8mm_D0.9mm_OD2.3mm +Soldered wire connection, for 4 times 0.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.5sqmm +0 +4 +4 +Connector_Wire +SolderWire-0.5sqmm_1x04_P4.8mm_D0.9mm_OD2.3mm_Relief +Soldered wire connection with feed through strain relief, for 4 times 0.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.5sqmm strain-relief +0 +4 +4 +Connector_Wire +SolderWire-0.5sqmm_1x04_P4.8mm_D0.9mm_OD2.3mm_Relief2x +Soldered wire connection with double feed through strain relief, for 4 times 0.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.5sqmm double-strain-relief +0 +4 +4 +Connector_Wire +SolderWire-0.5sqmm_1x05_P4.6mm_D0.9mm_OD2.1mm +Soldered wire connection, for 5 times 0.5 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.5sqmm +0 +5 +5 +Connector_Wire +SolderWire-0.5sqmm_1x05_P4.6mm_D0.9mm_OD2.1mm_Relief +Soldered wire connection with feed through strain relief, for 5 times 0.5 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.5sqmm strain-relief +0 +5 +5 +Connector_Wire +SolderWire-0.5sqmm_1x05_P4.6mm_D0.9mm_OD2.1mm_Relief2x +Soldered wire connection with double feed through strain relief, for 5 times 0.5 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.5sqmm double-strain-relief +0 +5 +5 +Connector_Wire +SolderWire-0.5sqmm_1x05_P4.8mm_D0.9mm_OD2.3mm +Soldered wire connection, for 5 times 0.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.5sqmm +0 +5 +5 +Connector_Wire +SolderWire-0.5sqmm_1x05_P4.8mm_D0.9mm_OD2.3mm_Relief +Soldered wire connection with feed through strain relief, for 5 times 0.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.5sqmm strain-relief +0 +5 +5 +Connector_Wire +SolderWire-0.5sqmm_1x05_P4.8mm_D0.9mm_OD2.3mm_Relief2x +Soldered wire connection with double feed through strain relief, for 5 times 0.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.5sqmm double-strain-relief +0 +5 +5 +Connector_Wire +SolderWire-0.5sqmm_1x06_P4.6mm_D0.9mm_OD2.1mm +Soldered wire connection, for 6 times 0.5 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.5sqmm +0 +6 +6 +Connector_Wire +SolderWire-0.5sqmm_1x06_P4.6mm_D0.9mm_OD2.1mm_Relief +Soldered wire connection with feed through strain relief, for 6 times 0.5 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.5sqmm strain-relief +0 +6 +6 +Connector_Wire +SolderWire-0.5sqmm_1x06_P4.6mm_D0.9mm_OD2.1mm_Relief2x +Soldered wire connection with double feed through strain relief, for 6 times 0.5 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 2.1mm, size source Multi-Contact FLEXI-E 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.5sqmm double-strain-relief +0 +6 +6 +Connector_Wire +SolderWire-0.5sqmm_1x06_P4.8mm_D0.9mm_OD2.3mm +Soldered wire connection, for 6 times 0.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.5sqmm +0 +6 +6 +Connector_Wire +SolderWire-0.5sqmm_1x06_P4.8mm_D0.9mm_OD2.3mm_Relief +Soldered wire connection with feed through strain relief, for 6 times 0.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.5sqmm strain-relief +0 +6 +6 +Connector_Wire +SolderWire-0.5sqmm_1x06_P4.8mm_D0.9mm_OD2.3mm_Relief2x +Soldered wire connection with double feed through strain relief, for 6 times 0.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.5sqmm double-strain-relief +0 +6 +6 +Connector_Wire +SolderWire-0.15sqmm_1x01_D0.5mm_OD1.5mm +Soldered wire connection, for a single 0.15 mm² wire, basic insulation, conductor diameter 0.5mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E 0.15 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.15sqmm +0 +1 +1 +Connector_Wire +SolderWire-0.15sqmm_1x01_D0.5mm_OD1.5mm_Relief +Soldered wire connection with feed through strain relief, for a single 0.15 mm² wire, basic insulation, conductor diameter 0.5mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E 0.15 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.15sqmm strain-relief +0 +1 +1 +Connector_Wire +SolderWire-0.15sqmm_1x01_D0.5mm_OD1.5mm_Relief2x +Soldered wire connection with double feed through strain relief, for a single 0.15 mm² wire, basic insulation, conductor diameter 0.5mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E 0.15 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.15sqmm double-strain-relief +0 +1 +1 +Connector_Wire +SolderWire-0.15sqmm_1x02_P4mm_D0.5mm_OD1.5mm +Soldered wire connection, for 2 times 0.15 mm² wires, basic insulation, conductor diameter 0.5mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E 0.15 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.15sqmm +0 +2 +2 +Connector_Wire +SolderWire-0.15sqmm_1x02_P4mm_D0.5mm_OD1.5mm_Relief +Soldered wire connection with feed through strain relief, for 2 times 0.15 mm² wires, basic insulation, conductor diameter 0.5mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E 0.15 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.15sqmm strain-relief +0 +2 +2 +Connector_Wire +SolderWire-0.15sqmm_1x02_P4mm_D0.5mm_OD1.5mm_Relief2x +Soldered wire connection with double feed through strain relief, for 2 times 0.15 mm² wires, basic insulation, conductor diameter 0.5mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E 0.15 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.15sqmm double-strain-relief +0 +2 +2 +Connector_Wire +SolderWire-0.15sqmm_1x03_P4mm_D0.5mm_OD1.5mm +Soldered wire connection, for 3 times 0.15 mm² wires, basic insulation, conductor diameter 0.5mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E 0.15 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.15sqmm +0 +3 +3 +Connector_Wire +SolderWire-0.15sqmm_1x03_P4mm_D0.5mm_OD1.5mm_Relief +Soldered wire connection with feed through strain relief, for 3 times 0.15 mm² wires, basic insulation, conductor diameter 0.5mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E 0.15 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.15sqmm strain-relief +0 +3 +3 +Connector_Wire +SolderWire-0.15sqmm_1x03_P4mm_D0.5mm_OD1.5mm_Relief2x +Soldered wire connection with double feed through strain relief, for 3 times 0.15 mm² wires, basic insulation, conductor diameter 0.5mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E 0.15 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.15sqmm double-strain-relief +0 +3 +3 +Connector_Wire +SolderWire-0.15sqmm_1x04_P4mm_D0.5mm_OD1.5mm +Soldered wire connection, for 4 times 0.15 mm² wires, basic insulation, conductor diameter 0.5mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E 0.15 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.15sqmm +0 +4 +4 +Connector_Wire +SolderWire-0.15sqmm_1x04_P4mm_D0.5mm_OD1.5mm_Relief +Soldered wire connection with feed through strain relief, for 4 times 0.15 mm² wires, basic insulation, conductor diameter 0.5mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E 0.15 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.15sqmm strain-relief +0 +4 +4 +Connector_Wire +SolderWire-0.15sqmm_1x04_P4mm_D0.5mm_OD1.5mm_Relief2x +Soldered wire connection with double feed through strain relief, for 4 times 0.15 mm² wires, basic insulation, conductor diameter 0.5mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E 0.15 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.15sqmm double-strain-relief +0 +4 +4 +Connector_Wire +SolderWire-0.15sqmm_1x05_P4mm_D0.5mm_OD1.5mm +Soldered wire connection, for 5 times 0.15 mm² wires, basic insulation, conductor diameter 0.5mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E 0.15 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.15sqmm +0 +5 +5 +Connector_Wire +SolderWire-0.15sqmm_1x05_P4mm_D0.5mm_OD1.5mm_Relief +Soldered wire connection with feed through strain relief, for 5 times 0.15 mm² wires, basic insulation, conductor diameter 0.5mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E 0.15 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.15sqmm strain-relief +0 +5 +5 +Connector_Wire +SolderWire-0.15sqmm_1x05_P4mm_D0.5mm_OD1.5mm_Relief2x +Soldered wire connection with double feed through strain relief, for 5 times 0.15 mm² wires, basic insulation, conductor diameter 0.5mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E 0.15 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.15sqmm double-strain-relief +0 +5 +5 +Connector_Wire +SolderWire-0.15sqmm_1x06_P4mm_D0.5mm_OD1.5mm +Soldered wire connection, for 6 times 0.15 mm² wires, basic insulation, conductor diameter 0.5mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E 0.15 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.15sqmm +0 +6 +6 +Connector_Wire +SolderWire-0.15sqmm_1x06_P4mm_D0.5mm_OD1.5mm_Relief +Soldered wire connection with feed through strain relief, for 6 times 0.15 mm² wires, basic insulation, conductor diameter 0.5mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E 0.15 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.15sqmm strain-relief +0 +6 +6 +Connector_Wire +SolderWire-0.15sqmm_1x06_P4mm_D0.5mm_OD1.5mm_Relief2x +Soldered wire connection with double feed through strain relief, for 6 times 0.15 mm² wires, basic insulation, conductor diameter 0.5mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E 0.15 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.15sqmm double-strain-relief +0 +6 +6 +Connector_Wire +SolderWire-0.25sqmm_1x01_D0.65mm_OD1.7mm +Soldered wire connection, for a single 0.25 mm² wire, basic insulation, conductor diameter 0.65mm, outer diameter 1.7mm, size source Multi-Contact FLEXI-E_0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.25sqmm +0 +1 +1 +Connector_Wire +SolderWire-0.25sqmm_1x01_D0.65mm_OD1.7mm_Relief +Soldered wire connection with feed through strain relief, for a single 0.25 mm² wire, basic insulation, conductor diameter 0.65mm, outer diameter 1.7mm, size source Multi-Contact FLEXI-E_0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.25sqmm strain-relief +0 +1 +1 +Connector_Wire +SolderWire-0.25sqmm_1x01_D0.65mm_OD1.7mm_Relief2x +Soldered wire connection with double feed through strain relief, for a single 0.25 mm² wire, basic insulation, conductor diameter 0.65mm, outer diameter 1.7mm, size source Multi-Contact FLEXI-E_0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.25sqmm double-strain-relief +0 +1 +1 +Connector_Wire +SolderWire-0.25sqmm_1x01_D0.65mm_OD2mm +Soldered wire connection, for a single 0.25 mm² wire, reinforced insulation, conductor diameter 0.65mm, outer diameter 2mm, size source Multi-Contact FLEXI-2V 0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.25sqmm +0 +1 +1 +Connector_Wire +SolderWire-0.25sqmm_1x01_D0.65mm_OD2mm_Relief +Soldered wire connection with feed through strain relief, for a single 0.25 mm² wire, reinforced insulation, conductor diameter 0.65mm, outer diameter 2mm, size source Multi-Contact FLEXI-2V 0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.25sqmm strain-relief +0 +1 +1 +Connector_Wire +SolderWire-0.25sqmm_1x01_D0.65mm_OD2mm_Relief2x +Soldered wire connection with double feed through strain relief, for a single 0.25 mm² wire, reinforced insulation, conductor diameter 0.65mm, outer diameter 2mm, size source Multi-Contact FLEXI-2V 0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.25sqmm double-strain-relief +0 +1 +1 +Connector_Wire +SolderWire-0.25sqmm_1x02_P4.2mm_D0.65mm_OD1.7mm +Soldered wire connection, for 2 times 0.25 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 1.7mm, size source Multi-Contact FLEXI-E_0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.25sqmm +0 +2 +2 +Connector_Wire +SolderWire-0.25sqmm_1x02_P4.2mm_D0.65mm_OD1.7mm_Relief +Soldered wire connection with feed through strain relief, for 2 times 0.25 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 1.7mm, size source Multi-Contact FLEXI-E_0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.25sqmm strain-relief +0 +2 +2 +Connector_Wire +SolderWire-0.25sqmm_1x02_P4.2mm_D0.65mm_OD1.7mm_Relief2x +Soldered wire connection with double feed through strain relief, for 2 times 0.25 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 1.7mm, size source Multi-Contact FLEXI-E_0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.25sqmm double-strain-relief +0 +2 +2 +Connector_Wire +SolderWire-0.25sqmm_1x02_P4.5mm_D0.65mm_OD2mm +Soldered wire connection, for 2 times 0.25 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 2mm, size source Multi-Contact FLEXI-2V 0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.25sqmm +0 +2 +2 +Connector_Wire +SolderWire-0.25sqmm_1x02_P4.5mm_D0.65mm_OD2mm_Relief +Soldered wire connection with feed through strain relief, for 2 times 0.25 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 2mm, size source Multi-Contact FLEXI-2V 0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.25sqmm strain-relief +0 +2 +2 +Connector_Wire +SolderWire-0.25sqmm_1x02_P4.5mm_D0.65mm_OD2mm_Relief2x +Soldered wire connection with double feed through strain relief, for 2 times 0.25 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 2mm, size source Multi-Contact FLEXI-2V 0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.25sqmm double-strain-relief +0 +2 +2 +Connector_Wire +SolderWire-0.25sqmm_1x03_P4.2mm_D0.65mm_OD1.7mm +Soldered wire connection, for 3 times 0.25 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 1.7mm, size source Multi-Contact FLEXI-E_0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.25sqmm +0 +3 +3 +Connector_Wire +SolderWire-0.25sqmm_1x03_P4.2mm_D0.65mm_OD1.7mm_Relief +Soldered wire connection with feed through strain relief, for 3 times 0.25 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 1.7mm, size source Multi-Contact FLEXI-E_0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.25sqmm strain-relief +0 +3 +3 +Connector_Wire +SolderWire-0.25sqmm_1x03_P4.2mm_D0.65mm_OD1.7mm_Relief2x +Soldered wire connection with double feed through strain relief, for 3 times 0.25 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 1.7mm, size source Multi-Contact FLEXI-E_0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.25sqmm double-strain-relief +0 +3 +3 +Connector_Wire +SolderWire-0.25sqmm_1x03_P4.5mm_D0.65mm_OD2mm +Soldered wire connection, for 3 times 0.25 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 2mm, size source Multi-Contact FLEXI-2V 0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.25sqmm +0 +3 +3 +Connector_Wire +SolderWire-0.25sqmm_1x03_P4.5mm_D0.65mm_OD2mm_Relief +Soldered wire connection with feed through strain relief, for 3 times 0.25 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 2mm, size source Multi-Contact FLEXI-2V 0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.25sqmm strain-relief +0 +3 +3 +Connector_Wire +SolderWire-0.25sqmm_1x03_P4.5mm_D0.65mm_OD2mm_Relief2x +Soldered wire connection with double feed through strain relief, for 3 times 0.25 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 2mm, size source Multi-Contact FLEXI-2V 0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.25sqmm double-strain-relief +0 +3 +3 +Connector_Wire +SolderWire-0.25sqmm_1x04_P4.2mm_D0.65mm_OD1.7mm +Soldered wire connection, for 4 times 0.25 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 1.7mm, size source Multi-Contact FLEXI-E_0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.25sqmm +0 +4 +4 +Connector_Wire +SolderWire-0.25sqmm_1x04_P4.2mm_D0.65mm_OD1.7mm_Relief +Soldered wire connection with feed through strain relief, for 4 times 0.25 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 1.7mm, size source Multi-Contact FLEXI-E_0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.25sqmm strain-relief +0 +4 +4 +Connector_Wire +SolderWire-0.25sqmm_1x04_P4.2mm_D0.65mm_OD1.7mm_Relief2x +Soldered wire connection with double feed through strain relief, for 4 times 0.25 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 1.7mm, size source Multi-Contact FLEXI-E_0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.25sqmm double-strain-relief +0 +4 +4 +Connector_Wire +SolderWire-0.25sqmm_1x04_P4.5mm_D0.65mm_OD2mm +Soldered wire connection, for 4 times 0.25 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 2mm, size source Multi-Contact FLEXI-2V 0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.25sqmm +0 +4 +4 +Connector_Wire +SolderWire-0.25sqmm_1x04_P4.5mm_D0.65mm_OD2mm_Relief +Soldered wire connection with feed through strain relief, for 4 times 0.25 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 2mm, size source Multi-Contact FLEXI-2V 0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.25sqmm strain-relief +0 +4 +4 +Connector_Wire +SolderWire-0.25sqmm_1x04_P4.5mm_D0.65mm_OD2mm_Relief2x +Soldered wire connection with double feed through strain relief, for 4 times 0.25 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 2mm, size source Multi-Contact FLEXI-2V 0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.25sqmm double-strain-relief +0 +4 +4 +Connector_Wire +SolderWire-0.25sqmm_1x05_P4.2mm_D0.65mm_OD1.7mm +Soldered wire connection, for 5 times 0.25 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 1.7mm, size source Multi-Contact FLEXI-E_0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.25sqmm +0 +5 +5 +Connector_Wire +SolderWire-0.25sqmm_1x05_P4.2mm_D0.65mm_OD1.7mm_Relief +Soldered wire connection with feed through strain relief, for 5 times 0.25 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 1.7mm, size source Multi-Contact FLEXI-E_0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.25sqmm strain-relief +0 +5 +5 +Connector_Wire +SolderWire-0.25sqmm_1x05_P4.2mm_D0.65mm_OD1.7mm_Relief2x +Soldered wire connection with double feed through strain relief, for 5 times 0.25 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 1.7mm, size source Multi-Contact FLEXI-E_0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.25sqmm double-strain-relief +0 +5 +5 +Connector_Wire +SolderWire-0.25sqmm_1x05_P4.5mm_D0.65mm_OD2mm +Soldered wire connection, for 5 times 0.25 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 2mm, size source Multi-Contact FLEXI-2V 0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.25sqmm +0 +5 +5 +Connector_Wire +SolderWire-0.25sqmm_1x05_P4.5mm_D0.65mm_OD2mm_Relief +Soldered wire connection with feed through strain relief, for 5 times 0.25 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 2mm, size source Multi-Contact FLEXI-2V 0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.25sqmm strain-relief +0 +5 +5 +Connector_Wire +SolderWire-0.25sqmm_1x05_P4.5mm_D0.65mm_OD2mm_Relief2x +Soldered wire connection with double feed through strain relief, for 5 times 0.25 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 2mm, size source Multi-Contact FLEXI-2V 0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.25sqmm double-strain-relief +0 +5 +5 +Connector_Wire +SolderWire-0.25sqmm_1x06_P4.2mm_D0.65mm_OD1.7mm +Soldered wire connection, for 6 times 0.25 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 1.7mm, size source Multi-Contact FLEXI-E_0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.25sqmm +0 +6 +6 +Connector_Wire +SolderWire-0.25sqmm_1x06_P4.2mm_D0.65mm_OD1.7mm_Relief +Soldered wire connection with feed through strain relief, for 6 times 0.25 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 1.7mm, size source Multi-Contact FLEXI-E_0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.25sqmm strain-relief +0 +6 +6 +Connector_Wire +SolderWire-0.25sqmm_1x06_P4.2mm_D0.65mm_OD1.7mm_Relief2x +Soldered wire connection with double feed through strain relief, for 6 times 0.25 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 1.7mm, size source Multi-Contact FLEXI-E_0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.25sqmm double-strain-relief +0 +6 +6 +Connector_Wire +SolderWire-0.25sqmm_1x06_P4.5mm_D0.65mm_OD2mm +Soldered wire connection, for 6 times 0.25 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 2mm, size source Multi-Contact FLEXI-2V 0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.25sqmm +0 +6 +6 +Connector_Wire +SolderWire-0.25sqmm_1x06_P4.5mm_D0.65mm_OD2mm_Relief +Soldered wire connection with feed through strain relief, for 6 times 0.25 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 2mm, size source Multi-Contact FLEXI-2V 0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.25sqmm strain-relief +0 +6 +6 +Connector_Wire +SolderWire-0.25sqmm_1x06_P4.5mm_D0.65mm_OD2mm_Relief2x +Soldered wire connection with double feed through strain relief, for 6 times 0.25 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 2mm, size source Multi-Contact FLEXI-2V 0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.25sqmm double-strain-relief +0 +6 +6 +Connector_Wire +SolderWire-0.75sqmm_1x01_D1.25mm_OD2.3mm +Soldered wire connection, for a single 0.75 mm² wire, basic insulation, conductor diameter 1.25mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.75sqmm +0 +1 +1 +Connector_Wire +SolderWire-0.75sqmm_1x01_D1.25mm_OD2.3mm_Relief +Soldered wire connection with feed through strain relief, for a single 0.75 mm² wire, basic insulation, conductor diameter 1.25mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.75sqmm strain-relief +0 +1 +1 +Connector_Wire +SolderWire-0.75sqmm_1x01_D1.25mm_OD2.3mm_Relief2x +Soldered wire connection with double feed through strain relief, for a single 0.75 mm² wire, basic insulation, conductor diameter 1.25mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.75sqmm double-strain-relief +0 +1 +1 +Connector_Wire +SolderWire-0.75sqmm_1x01_D1.25mm_OD3.5mm +Soldered wire connection, for a single 0.75 mm² wire, reinforced insulation, conductor diameter 1.25mm, outer diameter 3.5mm, size source Multi-Contact FLEXI-xV 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.75sqmm +0 +1 +1 +Connector_Wire +SolderWire-0.75sqmm_1x01_D1.25mm_OD3.5mm_Relief +Soldered wire connection with feed through strain relief, for a single 0.75 mm² wire, reinforced insulation, conductor diameter 1.25mm, outer diameter 3.5mm, size source Multi-Contact FLEXI-xV 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.75sqmm strain-relief +0 +1 +1 +Connector_Wire +SolderWire-0.75sqmm_1x01_D1.25mm_OD3.5mm_Relief2x +Soldered wire connection with double feed through strain relief, for a single 0.75 mm² wire, reinforced insulation, conductor diameter 1.25mm, outer diameter 3.5mm, size source Multi-Contact FLEXI-xV 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.75sqmm double-strain-relief +0 +1 +1 +Connector_Wire +SolderWire-0.75sqmm_1x02_P4.8mm_D1.25mm_OD2.3mm +Soldered wire connection, for 2 times 0.75 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.75sqmm +0 +2 +2 +Connector_Wire +SolderWire-0.75sqmm_1x02_P4.8mm_D1.25mm_OD2.3mm_Relief +Soldered wire connection with feed through strain relief, for 2 times 0.75 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.75sqmm strain-relief +0 +2 +2 +Connector_Wire +SolderWire-0.75sqmm_1x02_P4.8mm_D1.25mm_OD2.3mm_Relief2x +Soldered wire connection with double feed through strain relief, for 2 times 0.75 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.75sqmm double-strain-relief +0 +2 +2 +Connector_Wire +SolderWire-0.75sqmm_1x02_P7mm_D1.25mm_OD3.5mm +Soldered wire connection, for 2 times 0.75 mm² wires, reinforced insulation, conductor diameter 1.25mm, outer diameter 3.5mm, size source Multi-Contact FLEXI-xV 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.75sqmm +0 +2 +2 +Connector_Wire +SolderWire-0.75sqmm_1x02_P7mm_D1.25mm_OD3.5mm_Relief +Soldered wire connection with feed through strain relief, for 2 times 0.75 mm² wires, reinforced insulation, conductor diameter 1.25mm, outer diameter 3.5mm, size source Multi-Contact FLEXI-xV 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.75sqmm strain-relief +0 +2 +2 +Connector_Wire +SolderWire-0.75sqmm_1x02_P7mm_D1.25mm_OD3.5mm_Relief2x +Soldered wire connection with double feed through strain relief, for 2 times 0.75 mm² wires, reinforced insulation, conductor diameter 1.25mm, outer diameter 3.5mm, size source Multi-Contact FLEXI-xV 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.75sqmm double-strain-relief +0 +2 +2 +Connector_Wire +SolderWire-0.75sqmm_1x03_P4.8mm_D1.25mm_OD2.3mm +Soldered wire connection, for 3 times 0.75 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.75sqmm +0 +3 +3 +Connector_Wire +SolderWire-0.75sqmm_1x03_P4.8mm_D1.25mm_OD2.3mm_Relief +Soldered wire connection with feed through strain relief, for 3 times 0.75 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.75sqmm strain-relief +0 +3 +3 +Connector_Wire +SolderWire-0.75sqmm_1x03_P4.8mm_D1.25mm_OD2.3mm_Relief2x +Soldered wire connection with double feed through strain relief, for 3 times 0.75 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.75sqmm double-strain-relief +0 +3 +3 +Connector_Wire +SolderWire-0.75sqmm_1x03_P7mm_D1.25mm_OD3.5mm +Soldered wire connection, for 3 times 0.75 mm² wires, reinforced insulation, conductor diameter 1.25mm, outer diameter 3.5mm, size source Multi-Contact FLEXI-xV 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.75sqmm +0 +3 +3 +Connector_Wire +SolderWire-0.75sqmm_1x03_P7mm_D1.25mm_OD3.5mm_Relief +Soldered wire connection with feed through strain relief, for 3 times 0.75 mm² wires, reinforced insulation, conductor diameter 1.25mm, outer diameter 3.5mm, size source Multi-Contact FLEXI-xV 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.75sqmm strain-relief +0 +3 +3 +Connector_Wire +SolderWire-0.75sqmm_1x03_P7mm_D1.25mm_OD3.5mm_Relief2x +Soldered wire connection with double feed through strain relief, for 3 times 0.75 mm² wires, reinforced insulation, conductor diameter 1.25mm, outer diameter 3.5mm, size source Multi-Contact FLEXI-xV 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.75sqmm double-strain-relief +0 +3 +3 +Connector_Wire +SolderWire-0.75sqmm_1x04_P4.8mm_D1.25mm_OD2.3mm +Soldered wire connection, for 4 times 0.75 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.75sqmm +0 +4 +4 +Connector_Wire +SolderWire-0.75sqmm_1x04_P4.8mm_D1.25mm_OD2.3mm_Relief +Soldered wire connection with feed through strain relief, for 4 times 0.75 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.75sqmm strain-relief +0 +4 +4 +Connector_Wire +SolderWire-0.75sqmm_1x04_P4.8mm_D1.25mm_OD2.3mm_Relief2x +Soldered wire connection with double feed through strain relief, for 4 times 0.75 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.75sqmm double-strain-relief +0 +4 +4 +Connector_Wire +SolderWire-0.75sqmm_1x04_P7mm_D1.25mm_OD3.5mm +Soldered wire connection, for 4 times 0.75 mm² wires, reinforced insulation, conductor diameter 1.25mm, outer diameter 3.5mm, size source Multi-Contact FLEXI-xV 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.75sqmm +0 +4 +4 +Connector_Wire +SolderWire-0.75sqmm_1x04_P7mm_D1.25mm_OD3.5mm_Relief +Soldered wire connection with feed through strain relief, for 4 times 0.75 mm² wires, reinforced insulation, conductor diameter 1.25mm, outer diameter 3.5mm, size source Multi-Contact FLEXI-xV 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.75sqmm strain-relief +0 +4 +4 +Connector_Wire +SolderWire-0.75sqmm_1x04_P7mm_D1.25mm_OD3.5mm_Relief2x +Soldered wire connection with double feed through strain relief, for 4 times 0.75 mm² wires, reinforced insulation, conductor diameter 1.25mm, outer diameter 3.5mm, size source Multi-Contact FLEXI-xV 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.75sqmm double-strain-relief +0 +4 +4 +Connector_Wire +SolderWire-0.75sqmm_1x05_P4.8mm_D1.25mm_OD2.3mm +Soldered wire connection, for 5 times 0.75 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.75sqmm +0 +5 +5 +Connector_Wire +SolderWire-0.75sqmm_1x05_P4.8mm_D1.25mm_OD2.3mm_Relief +Soldered wire connection with feed through strain relief, for 5 times 0.75 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.75sqmm strain-relief +0 +5 +5 +Connector_Wire +SolderWire-0.75sqmm_1x05_P4.8mm_D1.25mm_OD2.3mm_Relief2x +Soldered wire connection with double feed through strain relief, for 5 times 0.75 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.75sqmm double-strain-relief +0 +5 +5 +Connector_Wire +SolderWire-0.75sqmm_1x05_P7mm_D1.25mm_OD3.5mm +Soldered wire connection, for 5 times 0.75 mm² wires, reinforced insulation, conductor diameter 1.25mm, outer diameter 3.5mm, size source Multi-Contact FLEXI-xV 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.75sqmm +0 +5 +5 +Connector_Wire +SolderWire-0.75sqmm_1x05_P7mm_D1.25mm_OD3.5mm_Relief +Soldered wire connection with feed through strain relief, for 5 times 0.75 mm² wires, reinforced insulation, conductor diameter 1.25mm, outer diameter 3.5mm, size source Multi-Contact FLEXI-xV 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.75sqmm strain-relief +0 +5 +5 +Connector_Wire +SolderWire-0.75sqmm_1x05_P7mm_D1.25mm_OD3.5mm_Relief2x +Soldered wire connection with double feed through strain relief, for 5 times 0.75 mm² wires, reinforced insulation, conductor diameter 1.25mm, outer diameter 3.5mm, size source Multi-Contact FLEXI-xV 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.75sqmm double-strain-relief +0 +5 +5 +Connector_Wire +SolderWire-0.75sqmm_1x06_P4.8mm_D1.25mm_OD2.3mm +Soldered wire connection, for 6 times 0.75 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.75sqmm +0 +6 +6 +Connector_Wire +SolderWire-0.75sqmm_1x06_P4.8mm_D1.25mm_OD2.3mm_Relief +Soldered wire connection with feed through strain relief, for 6 times 0.75 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.75sqmm strain-relief +0 +6 +6 +Connector_Wire +SolderWire-0.75sqmm_1x06_P4.8mm_D1.25mm_OD2.3mm_Relief2x +Soldered wire connection with double feed through strain relief, for 6 times 0.75 mm² wires, basic insulation, conductor diameter 1.25mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.75sqmm double-strain-relief +0 +6 +6 +Connector_Wire +SolderWire-0.75sqmm_1x06_P7mm_D1.25mm_OD3.5mm +Soldered wire connection, for 6 times 0.75 mm² wires, reinforced insulation, conductor diameter 1.25mm, outer diameter 3.5mm, size source Multi-Contact FLEXI-xV 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.75sqmm +0 +6 +6 +Connector_Wire +SolderWire-0.75sqmm_1x06_P7mm_D1.25mm_OD3.5mm_Relief +Soldered wire connection with feed through strain relief, for 6 times 0.75 mm² wires, reinforced insulation, conductor diameter 1.25mm, outer diameter 3.5mm, size source Multi-Contact FLEXI-xV 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.75sqmm strain-relief +0 +6 +6 +Connector_Wire +SolderWire-0.75sqmm_1x06_P7mm_D1.25mm_OD3.5mm_Relief2x +Soldered wire connection with double feed through strain relief, for 6 times 0.75 mm² wires, reinforced insulation, conductor diameter 1.25mm, outer diameter 3.5mm, size source Multi-Contact FLEXI-xV 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.75sqmm double-strain-relief +0 +6 +6 +Connector_Wire +SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm +Soldered wire connection, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.127sqmm +0 +1 +1 +Connector_Wire +SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm_Relief +Soldered wire connection with feed through strain relief, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.127sqmm strain-relief +0 +1 +1 +Connector_Wire +SolderWire-0.127sqmm_1x01_D0.48mm_OD1mm_Relief2x +Soldered wire connection with double feed through strain relief, for a single 0.127 mm² wire, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.127sqmm double-strain-relief +0 +1 +1 +Connector_Wire +SolderWire-0.127sqmm_1x02_P3.7mm_D0.48mm_OD1mm +Soldered wire connection, for 2 times 0.127 mm² wires, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.127sqmm +0 +2 +2 +Connector_Wire +SolderWire-0.127sqmm_1x02_P3.7mm_D0.48mm_OD1mm_Relief +Soldered wire connection with feed through strain relief, for 2 times 0.127 mm² wires, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.127sqmm strain-relief +0 +2 +2 +Connector_Wire +SolderWire-0.127sqmm_1x02_P3.7mm_D0.48mm_OD1mm_Relief2x +Soldered wire connection with double feed through strain relief, for 2 times 0.127 mm² wires, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.127sqmm double-strain-relief +0 +2 +2 +Connector_Wire +SolderWire-0.127sqmm_1x03_P3.7mm_D0.48mm_OD1mm +Soldered wire connection, for 3 times 0.127 mm² wires, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.127sqmm +0 +3 +3 +Connector_Wire +SolderWire-0.127sqmm_1x03_P3.7mm_D0.48mm_OD1mm_Relief +Soldered wire connection with feed through strain relief, for 3 times 0.127 mm² wires, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.127sqmm strain-relief +0 +3 +3 +Connector_Wire +SolderWire-0.127sqmm_1x03_P3.7mm_D0.48mm_OD1mm_Relief2x +Soldered wire connection with double feed through strain relief, for 3 times 0.127 mm² wires, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.127sqmm double-strain-relief +0 +3 +3 +Connector_Wire +SolderWire-0.127sqmm_1x04_P3.7mm_D0.48mm_OD1mm +Soldered wire connection, for 4 times 0.127 mm² wires, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.127sqmm +0 +4 +4 +Connector_Wire +SolderWire-0.127sqmm_1x04_P3.7mm_D0.48mm_OD1mm_Relief +Soldered wire connection with feed through strain relief, for 4 times 0.127 mm² wires, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.127sqmm strain-relief +0 +4 +4 +Connector_Wire +SolderWire-0.127sqmm_1x04_P3.7mm_D0.48mm_OD1mm_Relief2x +Soldered wire connection with double feed through strain relief, for 4 times 0.127 mm² wires, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.127sqmm double-strain-relief +0 +4 +4 +Connector_Wire +SolderWire-0.127sqmm_1x05_P3.7mm_D0.48mm_OD1mm +Soldered wire connection, for 5 times 0.127 mm² wires, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.127sqmm +0 +5 +5 +Connector_Wire +SolderWire-0.127sqmm_1x05_P3.7mm_D0.48mm_OD1mm_Relief +Soldered wire connection with feed through strain relief, for 5 times 0.127 mm² wires, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.127sqmm strain-relief +0 +5 +5 +Connector_Wire +SolderWire-0.127sqmm_1x05_P3.7mm_D0.48mm_OD1mm_Relief2x +Soldered wire connection with double feed through strain relief, for 5 times 0.127 mm² wires, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.127sqmm double-strain-relief +0 +5 +5 +Connector_Wire +SolderWire-0.127sqmm_1x06_P3.7mm_D0.48mm_OD1mm +Soldered wire connection, for 6 times 0.127 mm² wires, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.127sqmm +0 +6 +6 +Connector_Wire +SolderWire-0.127sqmm_1x06_P3.7mm_D0.48mm_OD1mm_Relief +Soldered wire connection with feed through strain relief, for 6 times 0.127 mm² wires, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.127sqmm strain-relief +0 +6 +6 +Connector_Wire +SolderWire-0.127sqmm_1x06_P3.7mm_D0.48mm_OD1mm_Relief2x +Soldered wire connection with double feed through strain relief, for 6 times 0.127 mm² wires, basic insulation, conductor diameter 0.48mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 0.127sqmm double-strain-relief +0 +6 +6 +Connector_Wire +SolderWire-1.5sqmm_1x01_D1.7mm_OD3.9mm +Soldered wire connection, for a single 1.5 mm² wire, reinforced insulation, conductor diameter 1.7mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1.5sqmm +0 +1 +1 +Connector_Wire +SolderWire-1.5sqmm_1x01_D1.7mm_OD3.9mm_Relief +Soldered wire connection with feed through strain relief, for a single 1.5 mm² wire, reinforced insulation, conductor diameter 1.7mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1.5sqmm strain-relief +0 +1 +1 +Connector_Wire +SolderWire-1.5sqmm_1x01_D1.7mm_OD3.9mm_Relief2x +Soldered wire connection with double feed through strain relief, for a single 1.5 mm² wire, reinforced insulation, conductor diameter 1.7mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1.5sqmm double-strain-relief +0 +1 +1 +Connector_Wire +SolderWire-1.5sqmm_1x01_D1.7mm_OD3mm +Soldered wire connection, for a single 1.5 mm² wire, basic insulation, conductor diameter 1.7mm, outer diameter 3mm, size source Multi-Contact FLEXI-E 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1.5sqmm +0 +1 +1 +Connector_Wire +SolderWire-1.5sqmm_1x01_D1.7mm_OD3mm_Relief +Soldered wire connection with feed through strain relief, for a single 1.5 mm² wire, basic insulation, conductor diameter 1.7mm, outer diameter 3mm, size source Multi-Contact FLEXI-E 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1.5sqmm strain-relief +0 +1 +1 +Connector_Wire +SolderWire-1.5sqmm_1x01_D1.7mm_OD3mm_Relief2x +Soldered wire connection with double feed through strain relief, for a single 1.5 mm² wire, basic insulation, conductor diameter 1.7mm, outer diameter 3mm, size source Multi-Contact FLEXI-E 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1.5sqmm double-strain-relief +0 +1 +1 +Connector_Wire +SolderWire-1.5sqmm_1x02_P6mm_D1.7mm_OD3mm +Soldered wire connection, for 2 times 1.5 mm² wires, basic insulation, conductor diameter 1.7mm, outer diameter 3mm, size source Multi-Contact FLEXI-E 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1.5sqmm +0 +2 +2 +Connector_Wire +SolderWire-1.5sqmm_1x02_P6mm_D1.7mm_OD3mm_Relief +Soldered wire connection with feed through strain relief, for 2 times 1.5 mm² wires, basic insulation, conductor diameter 1.7mm, outer diameter 3mm, size source Multi-Contact FLEXI-E 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1.5sqmm strain-relief +0 +2 +2 +Connector_Wire +SolderWire-1.5sqmm_1x02_P6mm_D1.7mm_OD3mm_Relief2x +Soldered wire connection with double feed through strain relief, for 2 times 1.5 mm² wires, basic insulation, conductor diameter 1.7mm, outer diameter 3mm, size source Multi-Contact FLEXI-E 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1.5sqmm double-strain-relief +0 +2 +2 +Connector_Wire +SolderWire-1.5sqmm_1x02_P7.8mm_D1.7mm_OD3.9mm +Soldered wire connection, for 2 times 1.5 mm² wires, reinforced insulation, conductor diameter 1.7mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1.5sqmm +0 +2 +2 +Connector_Wire +SolderWire-1.5sqmm_1x02_P7.8mm_D1.7mm_OD3.9mm_Relief +Soldered wire connection with feed through strain relief, for 2 times 1.5 mm² wires, reinforced insulation, conductor diameter 1.7mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1.5sqmm strain-relief +0 +2 +2 +Connector_Wire +SolderWire-1.5sqmm_1x02_P7.8mm_D1.7mm_OD3.9mm_Relief2x +Soldered wire connection with double feed through strain relief, for 2 times 1.5 mm² wires, reinforced insulation, conductor diameter 1.7mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1.5sqmm double-strain-relief +0 +2 +2 +Connector_Wire +SolderWire-1.5sqmm_1x03_P6mm_D1.7mm_OD3mm +Soldered wire connection, for 3 times 1.5 mm² wires, basic insulation, conductor diameter 1.7mm, outer diameter 3mm, size source Multi-Contact FLEXI-E 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1.5sqmm +0 +3 +3 +Connector_Wire +SolderWire-1.5sqmm_1x03_P6mm_D1.7mm_OD3mm_Relief +Soldered wire connection with feed through strain relief, for 3 times 1.5 mm² wires, basic insulation, conductor diameter 1.7mm, outer diameter 3mm, size source Multi-Contact FLEXI-E 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1.5sqmm strain-relief +0 +3 +3 +Connector_Wire +SolderWire-1.5sqmm_1x03_P6mm_D1.7mm_OD3mm_Relief2x +Soldered wire connection with double feed through strain relief, for 3 times 1.5 mm² wires, basic insulation, conductor diameter 1.7mm, outer diameter 3mm, size source Multi-Contact FLEXI-E 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1.5sqmm double-strain-relief +0 +3 +3 +Connector_Wire +SolderWire-1.5sqmm_1x03_P7.8mm_D1.7mm_OD3.9mm +Soldered wire connection, for 3 times 1.5 mm² wires, reinforced insulation, conductor diameter 1.7mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1.5sqmm +0 +3 +3 +Connector_Wire +SolderWire-1.5sqmm_1x03_P7.8mm_D1.7mm_OD3.9mm_Relief +Soldered wire connection with feed through strain relief, for 3 times 1.5 mm² wires, reinforced insulation, conductor diameter 1.7mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1.5sqmm strain-relief +0 +3 +3 +Connector_Wire +SolderWire-1.5sqmm_1x03_P7.8mm_D1.7mm_OD3.9mm_Relief2x +Soldered wire connection with double feed through strain relief, for 3 times 1.5 mm² wires, reinforced insulation, conductor diameter 1.7mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1.5sqmm double-strain-relief +0 +3 +3 +Connector_Wire +SolderWire-1.5sqmm_1x04_P6mm_D1.7mm_OD3mm +Soldered wire connection, for 4 times 1.5 mm² wires, basic insulation, conductor diameter 1.7mm, outer diameter 3mm, size source Multi-Contact FLEXI-E 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1.5sqmm +0 +4 +4 +Connector_Wire +SolderWire-1.5sqmm_1x04_P6mm_D1.7mm_OD3mm_Relief +Soldered wire connection with feed through strain relief, for 4 times 1.5 mm² wires, basic insulation, conductor diameter 1.7mm, outer diameter 3mm, size source Multi-Contact FLEXI-E 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1.5sqmm strain-relief +0 +4 +4 +Connector_Wire +SolderWire-1.5sqmm_1x04_P6mm_D1.7mm_OD3mm_Relief2x +Soldered wire connection with double feed through strain relief, for 4 times 1.5 mm² wires, basic insulation, conductor diameter 1.7mm, outer diameter 3mm, size source Multi-Contact FLEXI-E 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1.5sqmm double-strain-relief +0 +4 +4 +Connector_Wire +SolderWire-1.5sqmm_1x04_P7.8mm_D1.7mm_OD3.9mm +Soldered wire connection, for 4 times 1.5 mm² wires, reinforced insulation, conductor diameter 1.7mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1.5sqmm +0 +4 +4 +Connector_Wire +SolderWire-1.5sqmm_1x04_P7.8mm_D1.7mm_OD3.9mm_Relief +Soldered wire connection with feed through strain relief, for 4 times 1.5 mm² wires, reinforced insulation, conductor diameter 1.7mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1.5sqmm strain-relief +0 +4 +4 +Connector_Wire +SolderWire-1.5sqmm_1x04_P7.8mm_D1.7mm_OD3.9mm_Relief2x +Soldered wire connection with double feed through strain relief, for 4 times 1.5 mm² wires, reinforced insulation, conductor diameter 1.7mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1.5sqmm double-strain-relief +0 +4 +4 +Connector_Wire +SolderWire-1.5sqmm_1x05_P6mm_D1.7mm_OD3mm +Soldered wire connection, for 5 times 1.5 mm² wires, basic insulation, conductor diameter 1.7mm, outer diameter 3mm, size source Multi-Contact FLEXI-E 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1.5sqmm +0 +5 +5 +Connector_Wire +SolderWire-1.5sqmm_1x05_P6mm_D1.7mm_OD3mm_Relief +Soldered wire connection with feed through strain relief, for 5 times 1.5 mm² wires, basic insulation, conductor diameter 1.7mm, outer diameter 3mm, size source Multi-Contact FLEXI-E 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1.5sqmm strain-relief +0 +5 +5 +Connector_Wire +SolderWire-1.5sqmm_1x05_P6mm_D1.7mm_OD3mm_Relief2x +Soldered wire connection with double feed through strain relief, for 5 times 1.5 mm² wires, basic insulation, conductor diameter 1.7mm, outer diameter 3mm, size source Multi-Contact FLEXI-E 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1.5sqmm double-strain-relief +0 +5 +5 +Connector_Wire +SolderWire-1.5sqmm_1x05_P7.8mm_D1.7mm_OD3.9mm +Soldered wire connection, for 5 times 1.5 mm² wires, reinforced insulation, conductor diameter 1.7mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1.5sqmm +0 +5 +5 +Connector_Wire +SolderWire-1.5sqmm_1x05_P7.8mm_D1.7mm_OD3.9mm_Relief +Soldered wire connection with feed through strain relief, for 5 times 1.5 mm² wires, reinforced insulation, conductor diameter 1.7mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1.5sqmm strain-relief +0 +5 +5 +Connector_Wire +SolderWire-1.5sqmm_1x05_P7.8mm_D1.7mm_OD3.9mm_Relief2x +Soldered wire connection with double feed through strain relief, for 5 times 1.5 mm² wires, reinforced insulation, conductor diameter 1.7mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1.5sqmm double-strain-relief +0 +5 +5 +Connector_Wire +SolderWire-1.5sqmm_1x06_P6mm_D1.7mm_OD3mm +Soldered wire connection, for 6 times 1.5 mm² wires, basic insulation, conductor diameter 1.7mm, outer diameter 3mm, size source Multi-Contact FLEXI-E 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1.5sqmm +0 +6 +6 +Connector_Wire +SolderWire-1.5sqmm_1x06_P6mm_D1.7mm_OD3mm_Relief +Soldered wire connection with feed through strain relief, for 6 times 1.5 mm² wires, basic insulation, conductor diameter 1.7mm, outer diameter 3mm, size source Multi-Contact FLEXI-E 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1.5sqmm strain-relief +0 +6 +6 +Connector_Wire +SolderWire-1.5sqmm_1x06_P6mm_D1.7mm_OD3mm_Relief2x +Soldered wire connection with double feed through strain relief, for 6 times 1.5 mm² wires, basic insulation, conductor diameter 1.7mm, outer diameter 3mm, size source Multi-Contact FLEXI-E 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1.5sqmm double-strain-relief +0 +6 +6 +Connector_Wire +SolderWire-1.5sqmm_1x06_P7.8mm_D1.7mm_OD3.9mm +Soldered wire connection, for 6 times 1.5 mm² wires, reinforced insulation, conductor diameter 1.7mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1.5sqmm +0 +6 +6 +Connector_Wire +SolderWire-1.5sqmm_1x06_P7.8mm_D1.7mm_OD3.9mm_Relief +Soldered wire connection with feed through strain relief, for 6 times 1.5 mm² wires, reinforced insulation, conductor diameter 1.7mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1.5sqmm strain-relief +0 +6 +6 +Connector_Wire +SolderWire-1.5sqmm_1x06_P7.8mm_D1.7mm_OD3.9mm_Relief2x +Soldered wire connection with double feed through strain relief, for 6 times 1.5 mm² wires, reinforced insulation, conductor diameter 1.7mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1.5sqmm double-strain-relief +0 +6 +6 +Connector_Wire +SolderWire-1sqmm_1x01_D1.4mm_OD2.7mm +Soldered wire connection, for a single 1 mm² wire, basic insulation, conductor diameter 1.4mm, outer diameter 2.7mm, size source Multi-Contact FLEXI-E 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1sqmm +0 +1 +1 +Connector_Wire +SolderWire-1sqmm_1x01_D1.4mm_OD2.7mm_Relief +Soldered wire connection with feed through strain relief, for a single 1 mm² wire, basic insulation, conductor diameter 1.4mm, outer diameter 2.7mm, size source Multi-Contact FLEXI-E 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1sqmm strain-relief +0 +1 +1 +Connector_Wire +SolderWire-1sqmm_1x01_D1.4mm_OD2.7mm_Relief2x +Soldered wire connection with double feed through strain relief, for a single 1 mm² wire, basic insulation, conductor diameter 1.4mm, outer diameter 2.7mm, size source Multi-Contact FLEXI-E 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1sqmm double-strain-relief +0 +1 +1 +Connector_Wire +SolderWire-1sqmm_1x01_D1.4mm_OD3.9mm +Soldered wire connection, for a single 1 mm² wire, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1sqmm +0 +1 +1 +Connector_Wire +SolderWire-1sqmm_1x01_D1.4mm_OD3.9mm_Relief +Soldered wire connection with feed through strain relief, for a single 1 mm² wire, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1sqmm strain-relief +0 +1 +1 +Connector_Wire +SolderWire-1sqmm_1x01_D1.4mm_OD3.9mm_Relief2x +Soldered wire connection with double feed through strain relief, for a single 1 mm² wire, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1sqmm double-strain-relief +0 +1 +1 +Connector_Wire +SolderWire-1sqmm_1x02_P5.4mm_D1.4mm_OD2.7mm +Soldered wire connection, for 2 times 1 mm² wires, basic insulation, conductor diameter 1.4mm, outer diameter 2.7mm, size source Multi-Contact FLEXI-E 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1sqmm +0 +2 +2 +Connector_Wire +SolderWire-1sqmm_1x02_P5.4mm_D1.4mm_OD2.7mm_Relief +Soldered wire connection with feed through strain relief, for 2 times 1 mm² wires, basic insulation, conductor diameter 1.4mm, outer diameter 2.7mm, size source Multi-Contact FLEXI-E 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1sqmm strain-relief +0 +2 +2 +Connector_Wire +SolderWire-1sqmm_1x02_P5.4mm_D1.4mm_OD2.7mm_Relief2x +Soldered wire connection with double feed through strain relief, for 2 times 1 mm² wires, basic insulation, conductor diameter 1.4mm, outer diameter 2.7mm, size source Multi-Contact FLEXI-E 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1sqmm double-strain-relief +0 +2 +2 +Connector_Wire +SolderWire-1sqmm_1x02_P7.8mm_D1.4mm_OD3.9mm +Soldered wire connection, for 2 times 1 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1sqmm +0 +2 +2 +Connector_Wire +SolderWire-1sqmm_1x02_P7.8mm_D1.4mm_OD3.9mm_Relief +Soldered wire connection with feed through strain relief, for 2 times 1 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1sqmm strain-relief +0 +2 +2 +Connector_Wire +SolderWire-1sqmm_1x02_P7.8mm_D1.4mm_OD3.9mm_Relief2x +Soldered wire connection with double feed through strain relief, for 2 times 1 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1sqmm double-strain-relief +0 +2 +2 +Connector_Wire +SolderWire-1sqmm_1x03_P5.4mm_D1.4mm_OD2.7mm +Soldered wire connection, for 3 times 1 mm² wires, basic insulation, conductor diameter 1.4mm, outer diameter 2.7mm, size source Multi-Contact FLEXI-E 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1sqmm +0 +3 +3 +Connector_Wire +SolderWire-1sqmm_1x03_P5.4mm_D1.4mm_OD2.7mm_Relief +Soldered wire connection with feed through strain relief, for 3 times 1 mm² wires, basic insulation, conductor diameter 1.4mm, outer diameter 2.7mm, size source Multi-Contact FLEXI-E 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1sqmm strain-relief +0 +3 +3 +Connector_Wire +SolderWire-1sqmm_1x03_P5.4mm_D1.4mm_OD2.7mm_Relief2x +Soldered wire connection with double feed through strain relief, for 3 times 1 mm² wires, basic insulation, conductor diameter 1.4mm, outer diameter 2.7mm, size source Multi-Contact FLEXI-E 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1sqmm double-strain-relief +0 +3 +3 +Connector_Wire +SolderWire-1sqmm_1x03_P7.8mm_D1.4mm_OD3.9mm +Soldered wire connection, for 3 times 1 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1sqmm +0 +3 +3 +Connector_Wire +SolderWire-1sqmm_1x03_P7.8mm_D1.4mm_OD3.9mm_Relief +Soldered wire connection with feed through strain relief, for 3 times 1 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1sqmm strain-relief +0 +3 +3 +Connector_Wire +SolderWire-1sqmm_1x03_P7.8mm_D1.4mm_OD3.9mm_Relief2x +Soldered wire connection with double feed through strain relief, for 3 times 1 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1sqmm double-strain-relief +0 +3 +3 +Connector_Wire +SolderWire-1sqmm_1x04_P5.4mm_D1.4mm_OD2.7mm +Soldered wire connection, for 4 times 1 mm² wires, basic insulation, conductor diameter 1.4mm, outer diameter 2.7mm, size source Multi-Contact FLEXI-E 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1sqmm +0 +4 +4 +Connector_Wire +SolderWire-1sqmm_1x04_P5.4mm_D1.4mm_OD2.7mm_Relief +Soldered wire connection with feed through strain relief, for 4 times 1 mm² wires, basic insulation, conductor diameter 1.4mm, outer diameter 2.7mm, size source Multi-Contact FLEXI-E 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1sqmm strain-relief +0 +4 +4 +Connector_Wire +SolderWire-1sqmm_1x04_P5.4mm_D1.4mm_OD2.7mm_Relief2x +Soldered wire connection with double feed through strain relief, for 4 times 1 mm² wires, basic insulation, conductor diameter 1.4mm, outer diameter 2.7mm, size source Multi-Contact FLEXI-E 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1sqmm double-strain-relief +0 +4 +4 +Connector_Wire +SolderWire-1sqmm_1x04_P7.8mm_D1.4mm_OD3.9mm +Soldered wire connection, for 4 times 1 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1sqmm +0 +4 +4 +Connector_Wire +SolderWire-1sqmm_1x04_P7.8mm_D1.4mm_OD3.9mm_Relief +Soldered wire connection with feed through strain relief, for 4 times 1 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1sqmm strain-relief +0 +4 +4 +Connector_Wire +SolderWire-1sqmm_1x04_P7.8mm_D1.4mm_OD3.9mm_Relief2x +Soldered wire connection with double feed through strain relief, for 4 times 1 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1sqmm double-strain-relief +0 +4 +4 +Connector_Wire +SolderWire-1sqmm_1x05_P5.4mm_D1.4mm_OD2.7mm +Soldered wire connection, for 5 times 1 mm² wires, basic insulation, conductor diameter 1.4mm, outer diameter 2.7mm, size source Multi-Contact FLEXI-E 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1sqmm +0 +5 +5 +Connector_Wire +SolderWire-1sqmm_1x05_P5.4mm_D1.4mm_OD2.7mm_Relief +Soldered wire connection with feed through strain relief, for 5 times 1 mm² wires, basic insulation, conductor diameter 1.4mm, outer diameter 2.7mm, size source Multi-Contact FLEXI-E 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1sqmm strain-relief +0 +5 +5 +Connector_Wire +SolderWire-1sqmm_1x05_P5.4mm_D1.4mm_OD2.7mm_Relief2x +Soldered wire connection with double feed through strain relief, for 5 times 1 mm² wires, basic insulation, conductor diameter 1.4mm, outer diameter 2.7mm, size source Multi-Contact FLEXI-E 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1sqmm double-strain-relief +0 +5 +5 +Connector_Wire +SolderWire-1sqmm_1x05_P7.8mm_D1.4mm_OD3.9mm +Soldered wire connection, for 5 times 1 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1sqmm +0 +5 +5 +Connector_Wire +SolderWire-1sqmm_1x05_P7.8mm_D1.4mm_OD3.9mm_Relief +Soldered wire connection with feed through strain relief, for 5 times 1 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1sqmm strain-relief +0 +5 +5 +Connector_Wire +SolderWire-1sqmm_1x05_P7.8mm_D1.4mm_OD3.9mm_Relief2x +Soldered wire connection with double feed through strain relief, for 5 times 1 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1sqmm double-strain-relief +0 +5 +5 +Connector_Wire +SolderWire-1sqmm_1x06_P5.4mm_D1.4mm_OD2.7mm +Soldered wire connection, for 6 times 1 mm² wires, basic insulation, conductor diameter 1.4mm, outer diameter 2.7mm, size source Multi-Contact FLEXI-E 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1sqmm +0 +6 +6 +Connector_Wire +SolderWire-1sqmm_1x06_P5.4mm_D1.4mm_OD2.7mm_Relief +Soldered wire connection with feed through strain relief, for 6 times 1 mm² wires, basic insulation, conductor diameter 1.4mm, outer diameter 2.7mm, size source Multi-Contact FLEXI-E 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1sqmm strain-relief +0 +6 +6 +Connector_Wire +SolderWire-1sqmm_1x06_P5.4mm_D1.4mm_OD2.7mm_Relief2x +Soldered wire connection with double feed through strain relief, for 6 times 1 mm² wires, basic insulation, conductor diameter 1.4mm, outer diameter 2.7mm, size source Multi-Contact FLEXI-E 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1sqmm double-strain-relief +0 +6 +6 +Connector_Wire +SolderWire-1sqmm_1x06_P7.8mm_D1.4mm_OD3.9mm +Soldered wire connection, for 6 times 1 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1sqmm +0 +6 +6 +Connector_Wire +SolderWire-1sqmm_1x06_P7.8mm_D1.4mm_OD3.9mm_Relief +Soldered wire connection with feed through strain relief, for 6 times 1 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1sqmm strain-relief +0 +6 +6 +Connector_Wire +SolderWire-1sqmm_1x06_P7.8mm_D1.4mm_OD3.9mm_Relief2x +Soldered wire connection with double feed through strain relief, for 6 times 1 mm² wires, reinforced insulation, conductor diameter 1.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 1sqmm double-strain-relief +0 +6 +6 +Connector_Wire +SolderWire-2.5sqmm_1x01_D2.4mm_OD3.6mm +Soldered wire connection, for a single 2.5 mm² wire, basic insulation, conductor diameter 2.4mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2.5sqmm +0 +1 +1 +Connector_Wire +SolderWire-2.5sqmm_1x01_D2.4mm_OD3.6mm_Relief +Soldered wire connection with feed through strain relief, for a single 2.5 mm² wire, basic insulation, conductor diameter 2.4mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2.5sqmm strain-relief +0 +1 +1 +Connector_Wire +SolderWire-2.5sqmm_1x01_D2.4mm_OD3.6mm_Relief2x +Soldered wire connection with double feed through strain relief, for a single 2.5 mm² wire, basic insulation, conductor diameter 2.4mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2.5sqmm double-strain-relief +0 +1 +1 +Connector_Wire +SolderWire-2.5sqmm_1x01_D2.4mm_OD4.4mm +Soldered wire connection, for a single 2.5 mm² wire, reinforced insulation, conductor diameter 2.4mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-xV 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2.5sqmm +0 +1 +1 +Connector_Wire +SolderWire-2.5sqmm_1x01_D2.4mm_OD4.4mm_Relief +Soldered wire connection with feed through strain relief, for a single 2.5 mm² wire, reinforced insulation, conductor diameter 2.4mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-xV 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2.5sqmm strain-relief +0 +1 +1 +Connector_Wire +SolderWire-2.5sqmm_1x01_D2.4mm_OD4.4mm_Relief2x +Soldered wire connection with double feed through strain relief, for a single 2.5 mm² wire, reinforced insulation, conductor diameter 2.4mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-xV 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2.5sqmm double-strain-relief +0 +1 +1 +Connector_Wire +SolderWire-2.5sqmm_1x02_P7.2mm_D2.4mm_OD3.6mm +Soldered wire connection, for 2 times 2.5 mm² wires, basic insulation, conductor diameter 2.4mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2.5sqmm +0 +2 +2 +Connector_Wire +SolderWire-2.5sqmm_1x02_P7.2mm_D2.4mm_OD3.6mm_Relief +Soldered wire connection with feed through strain relief, for 2 times 2.5 mm² wires, basic insulation, conductor diameter 2.4mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2.5sqmm strain-relief +0 +2 +2 +Connector_Wire +SolderWire-2.5sqmm_1x02_P7.2mm_D2.4mm_OD3.6mm_Relief2x +Soldered wire connection with double feed through strain relief, for 2 times 2.5 mm² wires, basic insulation, conductor diameter 2.4mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2.5sqmm double-strain-relief +0 +2 +2 +Connector_Wire +SolderWire-2.5sqmm_1x02_P8.8mm_D2.4mm_OD4.4mm +Soldered wire connection, for 2 times 2.5 mm² wires, reinforced insulation, conductor diameter 2.4mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-xV 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2.5sqmm +0 +2 +2 +Connector_Wire +SolderWire-2.5sqmm_1x02_P8.8mm_D2.4mm_OD4.4mm_Relief +Soldered wire connection with feed through strain relief, for 2 times 2.5 mm² wires, reinforced insulation, conductor diameter 2.4mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-xV 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2.5sqmm strain-relief +0 +2 +2 +Connector_Wire +SolderWire-2.5sqmm_1x02_P8.8mm_D2.4mm_OD4.4mm_Relief2x +Soldered wire connection with double feed through strain relief, for 2 times 2.5 mm² wires, reinforced insulation, conductor diameter 2.4mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-xV 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2.5sqmm double-strain-relief +0 +2 +2 +Connector_Wire +SolderWire-2.5sqmm_1x03_P7.2mm_D2.4mm_OD3.6mm +Soldered wire connection, for 3 times 2.5 mm² wires, basic insulation, conductor diameter 2.4mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2.5sqmm +0 +3 +3 +Connector_Wire +SolderWire-2.5sqmm_1x03_P7.2mm_D2.4mm_OD3.6mm_Relief +Soldered wire connection with feed through strain relief, for 3 times 2.5 mm² wires, basic insulation, conductor diameter 2.4mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2.5sqmm strain-relief +0 +3 +3 +Connector_Wire +SolderWire-2.5sqmm_1x03_P7.2mm_D2.4mm_OD3.6mm_Relief2x +Soldered wire connection with double feed through strain relief, for 3 times 2.5 mm² wires, basic insulation, conductor diameter 2.4mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2.5sqmm double-strain-relief +0 +3 +3 +Connector_Wire +SolderWire-2.5sqmm_1x03_P8.8mm_D2.4mm_OD4.4mm +Soldered wire connection, for 3 times 2.5 mm² wires, reinforced insulation, conductor diameter 2.4mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-xV 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2.5sqmm +0 +3 +3 +Connector_Wire +SolderWire-2.5sqmm_1x03_P8.8mm_D2.4mm_OD4.4mm_Relief +Soldered wire connection with feed through strain relief, for 3 times 2.5 mm² wires, reinforced insulation, conductor diameter 2.4mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-xV 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2.5sqmm strain-relief +0 +3 +3 +Connector_Wire +SolderWire-2.5sqmm_1x03_P8.8mm_D2.4mm_OD4.4mm_Relief2x +Soldered wire connection with double feed through strain relief, for 3 times 2.5 mm² wires, reinforced insulation, conductor diameter 2.4mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-xV 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2.5sqmm double-strain-relief +0 +3 +3 +Connector_Wire +SolderWire-2.5sqmm_1x04_P7.2mm_D2.4mm_OD3.6mm +Soldered wire connection, for 4 times 2.5 mm² wires, basic insulation, conductor diameter 2.4mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2.5sqmm +0 +4 +4 +Connector_Wire +SolderWire-2.5sqmm_1x04_P7.2mm_D2.4mm_OD3.6mm_Relief +Soldered wire connection with feed through strain relief, for 4 times 2.5 mm² wires, basic insulation, conductor diameter 2.4mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2.5sqmm strain-relief +0 +4 +4 +Connector_Wire +SolderWire-2.5sqmm_1x04_P7.2mm_D2.4mm_OD3.6mm_Relief2x +Soldered wire connection with double feed through strain relief, for 4 times 2.5 mm² wires, basic insulation, conductor diameter 2.4mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2.5sqmm double-strain-relief +0 +4 +4 +Connector_Wire +SolderWire-2.5sqmm_1x04_P8.8mm_D2.4mm_OD4.4mm +Soldered wire connection, for 4 times 2.5 mm² wires, reinforced insulation, conductor diameter 2.4mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-xV 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2.5sqmm +0 +4 +4 +Connector_Wire +SolderWire-2.5sqmm_1x04_P8.8mm_D2.4mm_OD4.4mm_Relief +Soldered wire connection with feed through strain relief, for 4 times 2.5 mm² wires, reinforced insulation, conductor diameter 2.4mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-xV 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2.5sqmm strain-relief +0 +4 +4 +Connector_Wire +SolderWire-2.5sqmm_1x04_P8.8mm_D2.4mm_OD4.4mm_Relief2x +Soldered wire connection with double feed through strain relief, for 4 times 2.5 mm² wires, reinforced insulation, conductor diameter 2.4mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-xV 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2.5sqmm double-strain-relief +0 +4 +4 +Connector_Wire +SolderWire-2.5sqmm_1x05_P7.2mm_D2.4mm_OD3.6mm +Soldered wire connection, for 5 times 2.5 mm² wires, basic insulation, conductor diameter 2.4mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2.5sqmm +0 +5 +5 +Connector_Wire +SolderWire-2.5sqmm_1x05_P7.2mm_D2.4mm_OD3.6mm_Relief +Soldered wire connection with feed through strain relief, for 5 times 2.5 mm² wires, basic insulation, conductor diameter 2.4mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2.5sqmm strain-relief +0 +5 +5 +Connector_Wire +SolderWire-2.5sqmm_1x05_P7.2mm_D2.4mm_OD3.6mm_Relief2x +Soldered wire connection with double feed through strain relief, for 5 times 2.5 mm² wires, basic insulation, conductor diameter 2.4mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2.5sqmm double-strain-relief +0 +5 +5 +Connector_Wire +SolderWire-2.5sqmm_1x05_P8.8mm_D2.4mm_OD4.4mm +Soldered wire connection, for 5 times 2.5 mm² wires, reinforced insulation, conductor diameter 2.4mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-xV 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2.5sqmm +0 +5 +5 +Connector_Wire +SolderWire-2.5sqmm_1x05_P8.8mm_D2.4mm_OD4.4mm_Relief +Soldered wire connection with feed through strain relief, for 5 times 2.5 mm² wires, reinforced insulation, conductor diameter 2.4mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-xV 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2.5sqmm strain-relief +0 +5 +5 +Connector_Wire +SolderWire-2.5sqmm_1x05_P8.8mm_D2.4mm_OD4.4mm_Relief2x +Soldered wire connection with double feed through strain relief, for 5 times 2.5 mm² wires, reinforced insulation, conductor diameter 2.4mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-xV 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2.5sqmm double-strain-relief +0 +5 +5 +Connector_Wire +SolderWire-2.5sqmm_1x06_P7.2mm_D2.4mm_OD3.6mm +Soldered wire connection, for 6 times 2.5 mm² wires, basic insulation, conductor diameter 2.4mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2.5sqmm +0 +6 +6 +Connector_Wire +SolderWire-2.5sqmm_1x06_P7.2mm_D2.4mm_OD3.6mm_Relief +Soldered wire connection with feed through strain relief, for 6 times 2.5 mm² wires, basic insulation, conductor diameter 2.4mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2.5sqmm strain-relief +0 +6 +6 +Connector_Wire +SolderWire-2.5sqmm_1x06_P7.2mm_D2.4mm_OD3.6mm_Relief2x +Soldered wire connection with double feed through strain relief, for 6 times 2.5 mm² wires, basic insulation, conductor diameter 2.4mm, outer diameter 3.6mm, size source Multi-Contact FLEXI-E 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2.5sqmm double-strain-relief +0 +6 +6 +Connector_Wire +SolderWire-2.5sqmm_1x06_P8.8mm_D2.4mm_OD4.4mm +Soldered wire connection, for 6 times 2.5 mm² wires, reinforced insulation, conductor diameter 2.4mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-xV 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2.5sqmm +0 +6 +6 +Connector_Wire +SolderWire-2.5sqmm_1x06_P8.8mm_D2.4mm_OD4.4mm_Relief +Soldered wire connection with feed through strain relief, for 6 times 2.5 mm² wires, reinforced insulation, conductor diameter 2.4mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-xV 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2.5sqmm strain-relief +0 +6 +6 +Connector_Wire +SolderWire-2.5sqmm_1x06_P8.8mm_D2.4mm_OD4.4mm_Relief2x +Soldered wire connection with double feed through strain relief, for 6 times 2.5 mm² wires, reinforced insulation, conductor diameter 2.4mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-xV 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2.5sqmm double-strain-relief +0 +6 +6 +Connector_Wire +SolderWire-2sqmm_1x01_D2mm_OD3.9mm +Soldered wire connection, for a single 2 mm² wire, reinforced insulation, conductor diameter 2mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2sqmm +0 +1 +1 +Connector_Wire +SolderWire-2sqmm_1x01_D2mm_OD3.9mm_Relief +Soldered wire connection with feed through strain relief, for a single 2 mm² wire, reinforced insulation, conductor diameter 2mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2sqmm strain-relief +0 +1 +1 +Connector_Wire +SolderWire-2sqmm_1x01_D2mm_OD3.9mm_Relief2x +Soldered wire connection with double feed through strain relief, for a single 2 mm² wire, reinforced insulation, conductor diameter 2mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2sqmm double-strain-relief +0 +1 +1 +Connector_Wire +SolderWire-2sqmm_1x02_P7.8mm_D2mm_OD3.9mm +Soldered wire connection, for 2 times 2 mm² wires, reinforced insulation, conductor diameter 2mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2sqmm +0 +2 +2 +Connector_Wire +SolderWire-2sqmm_1x02_P7.8mm_D2mm_OD3.9mm_Relief +Soldered wire connection with feed through strain relief, for 2 times 2 mm² wires, reinforced insulation, conductor diameter 2mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2sqmm strain-relief +0 +2 +2 +Connector_Wire +SolderWire-2sqmm_1x02_P7.8mm_D2mm_OD3.9mm_Relief2x +Soldered wire connection with double feed through strain relief, for 2 times 2 mm² wires, reinforced insulation, conductor diameter 2mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2sqmm double-strain-relief +0 +2 +2 +Connector_Wire +SolderWire-2sqmm_1x03_P7.8mm_D2mm_OD3.9mm +Soldered wire connection, for 3 times 2 mm² wires, reinforced insulation, conductor diameter 2mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2sqmm +0 +3 +3 +Connector_Wire +SolderWire-2sqmm_1x03_P7.8mm_D2mm_OD3.9mm_Relief +Soldered wire connection with feed through strain relief, for 3 times 2 mm² wires, reinforced insulation, conductor diameter 2mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2sqmm strain-relief +0 +3 +3 +Connector_Wire +SolderWire-2sqmm_1x03_P7.8mm_D2mm_OD3.9mm_Relief2x +Soldered wire connection with double feed through strain relief, for 3 times 2 mm² wires, reinforced insulation, conductor diameter 2mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2sqmm double-strain-relief +0 +3 +3 +Connector_Wire +SolderWire-2sqmm_1x04_P7.8mm_D2mm_OD3.9mm +Soldered wire connection, for 4 times 2 mm² wires, reinforced insulation, conductor diameter 2mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2sqmm +0 +4 +4 +Connector_Wire +SolderWire-2sqmm_1x04_P7.8mm_D2mm_OD3.9mm_Relief +Soldered wire connection with feed through strain relief, for 4 times 2 mm² wires, reinforced insulation, conductor diameter 2mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2sqmm strain-relief +0 +4 +4 +Connector_Wire +SolderWire-2sqmm_1x04_P7.8mm_D2mm_OD3.9mm_Relief2x +Soldered wire connection with double feed through strain relief, for 4 times 2 mm² wires, reinforced insulation, conductor diameter 2mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2sqmm double-strain-relief +0 +4 +4 +Connector_Wire +SolderWire-2sqmm_1x05_P7.8mm_D2mm_OD3.9mm +Soldered wire connection, for 5 times 2 mm² wires, reinforced insulation, conductor diameter 2mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2sqmm +0 +5 +5 +Connector_Wire +SolderWire-2sqmm_1x05_P7.8mm_D2mm_OD3.9mm_Relief +Soldered wire connection with feed through strain relief, for 5 times 2 mm² wires, reinforced insulation, conductor diameter 2mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2sqmm strain-relief +0 +5 +5 +Connector_Wire +SolderWire-2sqmm_1x05_P7.8mm_D2mm_OD3.9mm_Relief2x +Soldered wire connection with double feed through strain relief, for 5 times 2 mm² wires, reinforced insulation, conductor diameter 2mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2sqmm double-strain-relief +0 +5 +5 +Connector_Wire +SolderWire-2sqmm_1x06_P7.8mm_D2mm_OD3.9mm +Soldered wire connection, for 6 times 2 mm² wires, reinforced insulation, conductor diameter 2mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2sqmm +0 +6 +6 +Connector_Wire +SolderWire-2sqmm_1x06_P7.8mm_D2mm_OD3.9mm_Relief +Soldered wire connection with feed through strain relief, for 6 times 2 mm² wires, reinforced insulation, conductor diameter 2mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2sqmm strain-relief +0 +6 +6 +Connector_Wire +SolderWire-2sqmm_1x06_P7.8mm_D2mm_OD3.9mm_Relief2x +Soldered wire connection with double feed through strain relief, for 6 times 2 mm² wires, reinforced insulation, conductor diameter 2mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-xV 2.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator +connector wire 2sqmm double-strain-relief +0 +6 +6 +Connector_Wire +SolderWirePad_1x01_SMD_1x2mm +Wire Pad, Square, SMD Pad, 1mm x 2mm, +MesurementPoint Square SMDPad 1mmx2mm +0 +1 +1 +Connector_Wire +SolderWirePad_1x01_SMD_5x10mm +Wire Pad, Square, SMD Pad, 5mm x 10mm, +MesurementPoint Square SMDPad 5mmx10mm +0 +1 +1 +Connector_Wuerth +Wuerth_WR-WTB_64800211622_1x02_P1.50mm_Vertical +Wuerth WR-WTB series connector, 64800211622 (https://katalog.we-online.com/em/datasheet/6480xx11622.pdf), generated with kicad-footprint-generator +connector Wuerth WR-WTB vertical +0 +2 +2 +Connector_Wuerth +Wuerth_WR-WTB_64800311622_1x03_P1.50mm_Vertical +Wuerth WR-WTB series connector, 64800311622 (https://katalog.we-online.com/em/datasheet/6480xx11622.pdf), generated with kicad-footprint-generator +connector Wuerth WR-WTB vertical +0 +3 +3 +Connector_Wuerth +Wuerth_WR-WTB_64800411622_1x04_P1.50mm_Vertical +Wuerth WR-WTB series connector, 64800411622 (https://katalog.we-online.com/em/datasheet/6480xx11622.pdf), generated with kicad-footprint-generator +connector Wuerth WR-WTB vertical +0 +4 +4 +Connector_Wuerth +Wuerth_WR-WTB_64800511622_1x05_P1.50mm_Vertical +Wuerth WR-WTB series connector, 64800511622 (https://katalog.we-online.com/em/datasheet/6480xx11622.pdf), generated with kicad-footprint-generator +connector Wuerth WR-WTB vertical +0 +5 +5 +Connector_Wuerth +Wuerth_WR-WTB_64800611622_1x06_P1.50mm_Vertical +Wuerth WR-WTB series connector, 64800611622 (https://katalog.we-online.com/em/datasheet/6480xx11622.pdf), generated with kicad-footprint-generator +connector Wuerth WR-WTB vertical +0 +6 +6 +Connector_Wuerth +Wuerth_WR-WTB_64800711622_1x07_P1.50mm_Vertical +Wuerth WR-WTB series connector, 64800711622 (https://katalog.we-online.com/em/datasheet/6480xx11622.pdf), generated with kicad-footprint-generator +connector Wuerth WR-WTB vertical +0 +7 +7 +Connector_Wuerth +Wuerth_WR-WTB_64800811622_1x08_P1.50mm_Vertical +Wuerth WR-WTB series connector, 64800811622 (https://katalog.we-online.com/em/datasheet/6480xx11622.pdf), generated with kicad-footprint-generator +connector Wuerth WR-WTB vertical +0 +8 +8 +Connector_Wuerth +Wuerth_WR-WTB_64800911622_1x09_P1.50mm_Vertical +Wuerth WR-WTB series connector, 64800911622 (https://katalog.we-online.com/em/datasheet/6480xx11622.pdf), generated with kicad-footprint-generator +connector Wuerth WR-WTB vertical +0 +9 +9 +Connector_Wuerth +Wuerth_WR-WTB_64801011622_1x10_P1.50mm_Vertical +Wuerth WR-WTB series connector, 64801011622 (https://katalog.we-online.com/em/datasheet/6480xx11622.pdf), generated with kicad-footprint-generator +connector Wuerth WR-WTB vertical +0 +10 +10 +Converter_ACDC +Converter_ACDC_CUI_PBO-3-Sxx_THT_Vertical +ACDC-Converter, 3W, CUI PBO-3, THT https://www.cui.com/product/resource/pbo-3.pdf +Converter AC-DC THT Vertical +0 +6 +6 +Converter_ACDC +Converter_ACDC_Hahn_HS-400xx_THT +ACDC-Converter, 3W, Hahn-HS-400xx, THT https://www.schukat.com/schukat/schukat_cms_de.nsf/index/FrameView?OpenDocument&art=HS40009&wg=M7942 +Hahn ACDC-Converter THT +0 +4 +4 +Converter_ACDC +Converter_ACDC_HiLink_HLK-5Mxx +ACDC-Converter, 10W, HiLink, HLK-5Mxx, (http://h.hlktech.com/download/ACDC%E7%94%B5%E6%BA%90%E6%A8%A1%E5%9D%975W%E7%B3%BB%E5%88%97/1/%E6%B5%B7%E5%87%8C%E7%A7%915W%E7%B3%BB%E5%88%97%E7%94%B5%E6%BA%90%E6%A8%A1%E5%9D%97%E8%A7%84%E6%A0%BC%E4%B9%A6V2.8.pdf) +ACDC-Converter 5W THT HiLink board mount module +0 +4 +4 +Converter_ACDC +Converter_ACDC_HiLink_HLK-10Mxx +ACDC-Converter, 10W, HiLink, HLK-10Mxx, THT, http://h.hlktech.com/download/ACDC%E7%94%B5%E6%BA%90%E6%A8%A1%E5%9D%9710W%E7%B3%BB%E5%88%97/1/%E6%B5%B7%E5%87%8C%E7%A7%9110W%E7%B3%BB%E5%88%97%E7%94%B5%E6%BA%90%E6%A8%A1%E5%9D%97%E8%A7%84%E6%A0%BC%E4%B9%A6V1.8.pdf +ACDC-Converter 10W THT HiLink board mount module +0 +4 +4 +Converter_ACDC +Converter_ACDC_HiLink_HLK-PMxx +ACDC-Converter, 3W, HiLink, HLK-PMxx, THT, http://www.hlktech.net/product_detail.php?ProId=54 +ACDC-Converter 3W THT HiLink board mount module +0 +4 +4 +Converter_ACDC +Converter_ACDC_MeanWell_IRM-02-xx_SMD +ACDC-Converter, 3W, Meanwell, IRM-02, SMD, https://www.meanwell.com/Upload/PDF/IRM-02/IRM-02-SPEC.PDF +ACDC-Converter 3W +0 +14 +14 +Converter_ACDC +Converter_ACDC_MeanWell_IRM-02-xx_THT +ACDC-Converter, 2W, Meanwell, IRM-02, THT, https://www.meanwell.co.uk/media/productPDF/IRM-02-spec.pdf +ACDC-Converter 2W THT +0 +4 +4 +Converter_ACDC +Converter_ACDC_MeanWell_IRM-03-xx_SMD +ACDC-Converter, 3W, Meanwell, IRM-03, SMD, http://www.meanwell.com/webapp/product/search.aspx?prod=IRM-03 +ACDC-Converter 3W +0 +14 +14 +Converter_ACDC +Converter_ACDC_MeanWell_IRM-03-xx_THT +ACDC-Converter, 3W, Meanwell, IRM-03, THT, https://www.meanwell.com/Upload/PDF/IRM-03/IRM-03-SPEC.PDF +ACDC-Converter 3W THT +0 +5 +5 +Converter_ACDC +Converter_ACDC_MeanWell_IRM-05-xx_THT +http://www.meanwell.com/webapp/product/search.aspx?prod=IRM-05 +ACDC-Converter 5W Meanwell IRM-05 +0 +4 +4 +Converter_ACDC +Converter_ACDC_MeanWell_IRM-10-xx_THT +http://www.meanwell.com/webapp/product/search.aspx?prod=IRM-10 +ACDC-Converter 10W Meanwell IRM-10 +0 +4 +4 +Converter_ACDC +Converter_ACDC_MeanWell_IRM-20-xx_THT +ACDC-Converter, 20W, Meanwell, IRM-20, THT http://www.meanwell.com/webapp/product/search.aspx?prod=IRM-20 +ACDC-Converter 20W Meanwell IRM-20 +0 +4 +4 +Converter_ACDC +Converter_ACDC_MeanWell_IRM-60-xx_THT +ACDC-Converter, 50-60W, Meanwell, IRM-60, THT https://www.meanwellusa.com/productPdf.aspx?i=687 +switching power supply +0 +4 +4 +Converter_ACDC +Converter_ACDC_Murata_BAC05SxxDC_THT +ACDC-Converter, Murata, 5W, ClassB, https://www.murata.com/products/productdata/8809982558238/KAC-BAC05.pdf +switching power supply tht +0 +5 +5 +Converter_ACDC +Converter_ACDC_RECOM_RAC01-xxSGB_THT +https://www.recom-power.com/pdf/Powerline-AC-DC/RAC01-GB.pdf +recom power ac dc rac01xxgb rac01-05sgb rac01-12sgb +0 +4 +4 +Converter_ACDC +Converter_ACDC_RECOM_RAC04-xxSGx_THT +https://www.recom-power.com/pdf/Powerline-AC-DC/RAC04-GA.pdf +recom power ac dc +0 +5 +5 +Converter_ACDC +Converter_ACDC_RECOM_RAC05-xxSK_THT +https://www.recom-power.com/pdf/Powerline-AC-DC/RAC05-K.pdf +recom power ac dc +0 +5 +5 +Converter_ACDC +Converter_ACDC_Recom_RAC20-xxDK_THT +Recom RAC20-xxDK https://recom-power.com/pdf/Powerline_AC-DC/RAC20-K.pdf#page=6 Rev. 6/2020 +Recom RAC20-xxDK +0 +5 +5 +Converter_ACDC +Converter_ACDC_Recom_RAC20-xxSK_THT +Recom RAC20-xxSK https://recom-power.com/pdf/Powerline_AC-DC/RAC20-K.pdf#page=6 Rev. 6/2020 +Recom RAC20-xxSK +0 +4 +4 +Converter_ACDC +Converter_ACDC_TRACO_TMG-15_THT +ACDC-Converter, TRACO, TMG Series 15 https://www.tracopower.com/products/tmg.pdf +ACDC-Converter TRACO TMG Series 15 +0 +4 +4 +Converter_ACDC +Converter_ACDC_TRACO_TMLM-04_THT +ACDC-Converter, TRACO, TMLM Series 04 https://www.tracopower.com/products/tmlm.pdf +ACDC-Converter TRACO TMLM Series 04 +0 +7 +7 +Converter_ACDC +Converter_ACDC_TRACO_TMLM-05_THT +ACDC-Converter, TRACO TMLM 05,https://www.tracopower.com/products/tmlm.pdf +ACDC-Converter TRACO TMLM 05 +0 +4 +4 +Converter_ACDC +Converter_ACDC_TRACO_TMLM-10-20_THT +ACDC-Converter, TRACO TMLM 10, TRACO TMLM 20, https://www.tracopower.com/products/tmlm.pdf +ACDC-Converter TRACO TMLM 10 and TMLM 20 +0 +4 +4 +Converter_ACDC +Converter_ACDC_TRACO_TPP-15-1xx-D_THT +ACDC-Converter, 15W, TRACO TPP 15-D, 42 x 28.9 x 21.5mm, https://www.tracopower.com/sites/default/files/products/datasheets/tpp15_d_datasheet.pdf +ACDC-Converter TRACO TPP +0 +5 +5 +Converter_ACDC +Converter_ACDC_Vigortronix_VTX-214-010-xxx_THT +Vigortronix VTX-214-010-xxx serie of ACDC converter, http://www.vigortronix.com/10WattACDCPCBPowerModule.aspx +Vigortronix VTX-214-010-xxx serie of ACDC converter +0 +4 +4 +Converter_ACDC +Converter_ACDC_Vigortronix_VTX-214-015-1xx_THT +Vigortronix VTX-214-010-xxx serie of ACDC converter, http://www.vigortronix.com/10WattACDCPCBPowerModule.aspx +Vigortronix VTX-214-010-xxx serie of ACDC converter +0 +5 +5 +Converter_DCDC +Converter_DCDC_Artesyn_ATA_SMD +DCDC-Converter, Artesyn, ATA Series, 3W Single and Dual Output, 1500VDC Isolation, 24.0x13.7x8.0mm https://www.artesyn.com/power/assets/ata_series_ds_01apr2015_79c25814fd.pdf https://www.artesyn.com/power/assets/trn_dc-dc_ata_3w_series_releas1430412818_techref.pdf +DCDC SMD +0 +7 +7 +Converter_DCDC +Converter_DCDC_Bothhand_CFUDxxxx_THT +DCDC-Converter, BOTHHAND, Type CFxxxx-Serie, (Very dodgy url but was the only at hand), +DCDC-Converter BOTHHAND Type CFxxxx-Serie +0 +10 +10 +Converter_DCDC +Converter_DCDC_Bothhand_CFUSxxxxEH_THT +DCDC-Converter, BOTHHAND, Type CFxxxx-Serie, (Very dodgy url but was the only at hand), +DCDC-Converter BOTHHAND Type CFxxxx-Serie +0 +9 +9 +Converter_DCDC +Converter_DCDC_Bothhand_CFUSxxxx_THT +DCDC-Converter, BOTHHAND, Type CFxxxx-Serie, (Very dodgy url but was the only at hand), +DCDC-Converter BOTHHAND Type CFxxxx-Serie +0 +8 +8 +Converter_DCDC +Converter_DCDC_Cincon_EC5BExx_Dual_THT +DCDC-Converter, CINCON, EC5BExx, 18-36VDC to Dual output, http://www.cincon.com/upload/media/data%20sheets/Data%20Sheet%20(DC)/B%20CASE/SPEC-EC5BE-V24.pdf +DCDC-Converter CINCON EC5BExx 18-36VDC to Dual output +0 +6 +6 +Converter_DCDC +Converter_DCDC_Cincon_EC5BExx_Single_THT +DCDC-Converter, CINCON, EC5BExx, 18-36VDC to dual output, http://www.cincon.com/upload/media/data%20sheets/Data%20Sheet%20(DC)/B%20CASE/SPEC-EC5BE-V24.pdf +DCDC-Converter CINCON EC5BExx 18-36VDC to dual output +0 +4 +4 +Converter_DCDC +Converter_DCDC_Cincon_EC6Cxx_Dual-Triple_THT +DCDC-Converter, CINCON, EC6Cxx, dual or tripple output, http://www.cincon.com/upload/media/data%20sheets/Data%20Sheet%20(DC)/C%20CASE/SPEC-EC6C-V12.pdf +DCDC-Converter CINCON EC6Cxx dual or tripple output +0 +7 +7 +Converter_DCDC +Converter_DCDC_Cincon_EC6Cxx_Single_THT +DCDC-Converter, CINCON, EC6Cxx, single output, http://www.cincon.com/upload/media/data%20sheets/Data%20Sheet%20(DC)/C%20CASE/SPEC-EC6C-V12.pdf +DCDC-Converter CINCON EC6Cxx single output +0 +6 +6 +Converter_DCDC +Converter_DCDC_Cyntec_MUN12AD01-SH +http://www.cyntec.com/upfile/products/download/Cyntec%20MUN12AD01-SH_Datasheet.pdf +Power Module uPOL MUN12AD01 +0 +13 +9 +Converter_DCDC +Converter_DCDC_Cyntec_MUN12AD03-SH +http://www.cyntec.com/upfile/products/download/Cyntec%20MUN12AD03-SH_Datasheet.pdf +Power Module uPOL MUN12AD03 +0 +19 +11 +Converter_DCDC +Converter_DCDC_MeanWell_NID30_THT +Meanwell DCDC non-isolated converter SIP module, http://www.meanwell.com/webapp/product/search.aspx?prod=nid30 +DCDC non-isolated converter +0 +11 +11 +Converter_DCDC +Converter_DCDC_MeanWell_NID60_THT +MeanWell NID60, http://www.meanwell.com/Upload/PDF/NID60/NID60-SPEC.PDF +MeanWell NID60 +0 +11 +11 +Converter_DCDC +Converter_DCDC_Murata_CRE1xxxxxx3C_THT +Isolated 1W single output DC/DC, http://power.murata.com/data/power/ncl/kdc_cre1.pdf +Isolated 1W single output DC/DC +0 +4 +4 +Converter_DCDC +Converter_DCDC_Murata_CRE1xxxxxxDC_THT +Isloated DC-DC, http://power.murata.com/data/power/ncl/kdc_cre1.pdf +Isloated DC-DC +0 +4 +4 +Converter_DCDC +Converter_DCDC_Murata_CRE1xxxxxxSC_THT +http://power.murata.com/data/power/ncl/kdc_cre1.pdf +murata dc-dc transformer +0 +4 +4 +Converter_DCDC +Converter_DCDC_Murata_MEE1SxxxxSC_THT +https://power.murata.com/pub/data/power/ncl/kdc_mee1.pdf +murata dc-dc transformer +0 +4 +4 +Converter_DCDC +Converter_DCDC_Murata_MEE3SxxxxSC_THT +https://power.murata.com/pub/data/power/ncl/kdc_mee3.pdf +murata dc-dc transformer +0 +4 +4 +Converter_DCDC +Converter_DCDC_Murata_MGJ2DxxxxxxSC_THT +Murata MGJ2DxxxxxxSC, 19.5x9.8x12.5mm, 5.2kVDC Isolated, 2W, SIP package style, https://power.murata.com/data/power/ncl/kdc_mgj2.pdf +Murata MGJ2DxxxxxxSC +0 +5 +5 +Converter_DCDC +Converter_DCDC_Murata_MGJ3 +Murata MGJ3, 5.2kVDC Isolated 3W Gate Drive, 15V/5V/5V Configurable, 22.61x23.11x14.19mm, https://power.murata.com/datasheet?/data/power/ncl/kdc_mgj3.pdf +DCDC SMD +0 +7 +7 +Converter_DCDC +Converter_DCDC_Murata_MYRxP +Murata MYRxP PicoBK DC/DC converter with inductor, 2x2.5mm, height 1.04mm. https://www.murata.com/en-global/products/power/nonisolated-dc-dc-converter/overview/lineup/picobk +PicoBK DC/DC MYRBP MYRGP MYRLP +0 +19 +9 +Converter_DCDC +Converter_DCDC_Murata_NCS1SxxxxSC_THT +Murata NCS1SxxxxSC https://power.murata.com/data/power/ncl/kdc_ncs1.pdf (Script generated with StandardBox.py) (Murata NCS1SxxxxSC https://power.murata.com/data/power/ncl/kdc_ncs1.pdf) +Murata NCS1SxxxxSC +0 +5 +5 +Converter_DCDC +Converter_DCDC_Murata_NMAxxxxDC_THT +Isolated 1W DCDC-Converter, http://power.murata.com/data/power/ncl/kdc_nma.pdf +Isolated 1W DCDC-Converter +0 +6 +6 +Converter_DCDC +Converter_DCDC_Murata_NMAxxxxSC_THT +Murata NMAxxxxSC footprint based on SIP7, http://power.murata.com/data/power/ncl/kdc_nma.pdf +Murata NMAxxxxSC DCDC-Converter +0 +5 +5 +Converter_DCDC +Converter_DCDC_Murata_NXExSxxxxMC_SMD +Isolated 1W or 2W Single Output SM DC/DC Converters https://www.murata.com/products/productdata/8807031865374/kdc-nxe1.pdf#page=8 https://www.murata.com/products/productdata/8807031898142/kdc-nxe2.pdf#page=9 +Isolated 1W or 2W Single Output SM DC/DC Converters +0 +5 +5 +Converter_DCDC +Converter_DCDC_Murata_OKI-78SR_Horizontal +https://power.murata.com/data/power/oki-78sr.pdf +78sr3.3 78sr5 78sr9 78sr12 78srXX +0 +3 +3 +Converter_DCDC +Converter_DCDC_Murata_OKI-78SR_Vertical +https://power.murata.com/data/power/oki-78sr.pdf +78sr3.3 78sr5 78sr9 78sr12 78srXX +0 +3 +3 +Converter_DCDC +Converter_DCDC_RECOM_R-78B-2.0_THT +DCDC-Converter, RECOM, RECOM_R-78B-2.0, SIP-3, pitch 2.54mm, package size 11.5x8.5x17.5mm^3, https://www.recom-power.com/pdf/Innoline/R-78Bxx-2.0.pdf +dc-dc recom buck sip-3 pitch 2.54mm +0 +3 +3 +Converter_DCDC +Converter_DCDC_RECOM_R-78E-0.5_THT +DCDC-Converter, RECOM, RECOM_R-78E-0.5, SIP-3, pitch 2.54mm, package size 11.6x8.5x10.4mm^3, https://www.recom-power.com/pdf/Innoline/R-78Exx-0.5.pdf +dc-dc recom buck sip-3 pitch 2.54mm +0 +3 +3 +Converter_DCDC +Converter_DCDC_RECOM_R-78HB-0.5L_THT +DCDC-Converter, RECOM, RECOM_R-78HB-0.5L, SIP-3, Horizontally Mounted, pitch 2.54mm, package size 11.5x8.5x17.5mm^3, https://www.recom-power.com/pdf/Innoline/R-78HBxx-0.5_L.pdf +dc-dc recom buck sip-3 pitch 2.54mm +0 +3 +3 +Converter_DCDC +Converter_DCDC_RECOM_R-78HB-0.5_THT +DCDC-Converter, RECOM, RECOM_R-78HB-0.5, SIP-3, pitch 2.54mm, package size 11.5x8.5x17.5mm^3, https://www.recom-power.com/pdf/Innoline/R-78HBxx-0.5_L.pdf +dc-dc recom buck sip-3 pitch 2.54mm +0 +3 +3 +Converter_DCDC +Converter_DCDC_RECOM_R-78S-0.1_THT +DCDC-Converter, RECOM, RECOM_R-78S-0.1, SIP-4, pitch 2.54mm, package size 11.6x8.5x10.4mm^3, https://www.recom-power.com/pdf/Innoline/R-78Sxx-0.1.pdf +dc-dc recom buck sip-4 pitch 2.54mm +0 +4 +4 +Converter_DCDC +Converter_DCDC_RECOM_R5xxxDA_THT +DCDC-Converter, RECOM, RECOM_R5xxxDA, SIP-12, Horizontally Mounted, pitch 2.54mm, package size 32.2x9.1x15mm^3, https://www.recom-power.com/pdf/Innoline/R-5xxxPA_DA.pdf +dc-dc recom buck sip-12 pitch 2.54mm +0 +12 +12 +Converter_DCDC +Converter_DCDC_RECOM_R5xxxPA_THT +DCDC-Converter, RECOM, RECOM_R5xxxPA, SIP-12, pitch 2.54mm, package size 32.2x9.1x15mm^3, https://www.recom-power.com/pdf/Innoline/R-5xxxPA_DA.pdf +dc-dc recom buck sip-12 pitch 2.54mm +0 +12 +12 +Converter_DCDC +Converter_DCDC_RECOM_RCD-24_THT +Constant current LED Driver DC/DC Converter, https://g.recomcdn.com/media/Datasheet/pdf/.fYUQjOlW/.t2a80a771bdbb0ef300f7/Datasheet-93/RCD-24.pdf +Led Driver DC-DC +0 +6 +6 +Converter_DCDC +Converter_DCDC_RECOM_RPA60-xxxxSFW +RPA60-FW 60W Isolated DC to DC Converters +DCDC Regulator Single +0 +6 +6 +Converter_DCDC +Converter_DCDC_RECOM_RPMx.x-x.0 +https://www.recom-power.com/pdf/Innoline/RPM-6.0.pdf +dc-dc recom buck lga-25 pitch 2.29mm +0 +25 +25 +Converter_DCDC +Converter_DCDC_Silvertel_Ag54xx +DCDC-Converter, 30W POE, Silvertel, pitch 2.54mm, package size 62x19.5x14mm, https://silvertel.com/images/datasheets/Ag5400-datasheet-high%20Efficiency-30W-Power-Over-Ethernet-Plus-Module-PoE+PD.pdf +DCDC-Converter Silvertel Ag5405 Ag5412 Ag5424 single output POE +0 +10 +10 +Converter_DCDC +Converter_DCDC_Silvertel_Ag99xxLP_THT +Converter, DCDC, Silvertel Ag9900 PoE, 1500VDC isolation, Vin 36V - 75V, 4.9W - 10W output, https://silvertel.com/images/datasheets/Ag9900M-datasheet-ultra-miniature-isolated-Power-over-Ethernet-POE-module.pdf +DCDC converter IEEE 802.3af +0 +8 +8 +Converter_DCDC +Converter_DCDC_Silvertel_Ag5810 +DCDC-Converter, 60W POE, Silvertel, pitch 2.54mm, package size 69.98x30x15.64mm, https://silvertel.com/images/datasheets/Ag5810-datasheet-IEEE802_3bt-Power-over-Ethernet-4-pair-PD.pdf +DCDC-Converter Silvertel Ag5810 single output POE +0 +163 +13 +Converter_DCDC +Converter_DCDC_TRACO_TBA1-xxxxE_Dual_THT +DCDC-Converter, TRACO, TBA1-xxxxE, Dual, 1W, Rev. October 31. 2023 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tba1e.pdf) +DCDC-Converter TRACO TBA1E THT SIP-7 1W +0 +5 +5 +Converter_DCDC +Converter_DCDC_TRACO_TBA1-xxxxE_Single_THT +DCDC-Converter, TRACO, TBA1-xxxxE, Single, 1W, Rev. October 31. 2023 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tba1e.pdf) +DCDC-Converter TRACO TBA1E THT SIP-7 1W +0 +4 +4 +Converter_DCDC +Converter_DCDC_TRACO_TBA2-xxxx_Dual_THT +DCDC-Converter, TRACO, TBA2-xxxx, Dual, 2W, Rev. October 18. 2023 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tba2.pdf) +DCDC-Converter TRACO TBA2 THT SIP-7 2W +0 +5 +5 +Converter_DCDC +Converter_DCDC_TRACO_TBA2-xxxx_Single_THT +DCDC-Converter, TRACO, TBA2-xxxx, Single, 2W, Rev. October 18. 2023 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tba2.pdf) +DCDC-Converter TRACO TBA2 THT SIP-7 2W +0 +4 +4 +Converter_DCDC +Converter_DCDC_TRACO_TDN_5-xxxxWISM_SMD +Traco TDN 5WISM Series, 5W, SMD (https://assets.tracopower.com/20200225170127/TDN5WISM/documents/tdn5wism-datasheet.pdf#page=3) +dcdc traco 5w smd +0 +6 +6 +Converter_DCDC +Converter_DCDC_TRACO_TDN_5-xxxxWI_THT +Traco TDN 5WI Series, 5W (https://www.tracopower.com/sites/default/files/products/datasheets/tdn5wi_datasheet.pdf#page=4) +dcdc traco 5w +0 +6 +6 +Converter_DCDC +Converter_DCDC_TRACO_TDU1-xxxx_THT +DCDC-Converter, TRACO, TDU1-xxxx, 1W, Rev. October 24. 2023 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tdu1.pdf) +DCDC-Converter TRACO TDU1 THT DIP-8 1W +0 +4 +4 +Converter_DCDC +Converter_DCDC_TRACO_TEA1-xxxxE_THT +DCDC-Converter, TRACO, TEA1-xxxxE, 1W, Rev. October 31. 2023 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tea1e.pdf) +DCDC-Converter TRACO TEA1E THT SIP-7 1W +0 +4 +4 +Converter_DCDC +Converter_DCDC_TRACO_TEA1-xxxxHI_THT +DCDC-Converter, TRACO, TEA1-xxxxHI, 1W, Rev. October 31. 2023 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tea1hi.pdf) +DCDC-Converter TRACO TEA1HI THT SIP-7 1W +0 +4 +4 +Converter_DCDC +Converter_DCDC_TRACO_TEA1-xxxx_THT +DCDC-Converter, TRACO, TEA1-xxxx, 1W, Rev. October 19. 2023 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tea1.pdf) +DCDC-Converter TRACO TEA1 THT SIP-4 1W +0 +4 +4 +Converter_DCDC +Converter_DCDC_TRACO_TEL12-xxxx_THT +Traco 12W, THT (https://www.tracopower.com/sites/default/files/products/datasheets/tel12_datasheet.pdf) +traco dcdc tht 12w +0 +5 +5 +Converter_DCDC +Converter_DCDC_TRACO_TEN10-xxxx_Dual_THT +DCDC-Converter, TRACO, TEN10-xxxx, single output, https://assets.tracopower.com/20171102100522/TEN10/documents/ten10-datasheet.pdf +DCDC-Converter TRACO TEN10-xxxx single output +0 +5 +5 +Converter_DCDC +Converter_DCDC_TRACO_TEN10-xxxx_Single_THT +DCDC-Converter, TRACO, TEN10-xxxx, single output, https://assets.tracopower.com/20171102100522/TEN10/documents/ten10-datasheet.pdf +DCDC-Converter TRACO TEN10-xxxx single output +0 +4 +4 +Converter_DCDC +Converter_DCDC_TRACO_TEN10-xxxx_THT +DCDC-Converter, TRACO, TEN10-xxxx, https://assets.tracopower.com/20171102100522/TEN10/documents/ten10-datasheet.pdf +DCDC-Converter TRACO TEN10-xxxx +0 +4 +4 +Converter_DCDC +Converter_DCDC_TRACO_TEN20-xxxx-N4_THT +DCDC-Converter TRACO TEN20 Generic, https://assets.tracopower.com/20171102100522/TEN20/documents/ten20-datasheet.pdf +DCDC-Converter TRACO TEN20 Generic +0 +5 +5 +Converter_DCDC +Converter_DCDC_TRACO_TEN20-xxxx_THT +DCDC-Converter TRACO TEN20 Generic, https://assets.tracopower.com/20171102100522/TEN20/documents/ten20-datasheet.pdf +DCDC-Converter TRACO TEN20 Generic +0 +6 +6 +Converter_DCDC +Converter_DCDC_TRACO_THB10-xxxx_Dual_THT +DCDC-Converter, TRACO, THB10-xxxx, Dual, 10W, Rev. December 07. 2023 (Script generated with StandardBox.py) (https://www.tracopower.com/products/thb10.pdf) +DCDC-Converter TRACO THB10 THT 2"x1" 10W +0 +5 +5 +Converter_DCDC +Converter_DCDC_TRACO_THB10-xxxx_Single_THT +DCDC-Converter, TRACO, THB10-xxxx, Single, 10W, Rev. December 07. 2023 (Script generated with StandardBox.py) (https://www.tracopower.com/products/thb10.pdf) +DCDC-Converter TRACO THB10 THT 2"x1" 10W +0 +4 +4 +Converter_DCDC +Converter_DCDC_TRACO_THD_15-xxxxWIN_THT +Traco THD 15WIN, 15W, THT (https://www.tracopower.com/products/thd15win.pdf#page=3) +traco dcdc tht 15w +0 +9 +9 +Converter_DCDC +Converter_DCDC_TRACO_THN30-xxxx_THT +DCDC-Converter TRACO THN 10 to 30W, Single or dual Output, (https://www.tracopower.com/sites/default/files/products/datasheets/thn30_datasheet.pdf) +DCDC-Converter TRACO THN30 Generic +0 +6 +6 +Converter_DCDC +Converter_DCDC_TRACO_TMA-05xxD_12xxD_Dual_THT +DCDC-Converter, TRACO, TMA-05xxD, TMA-12xxD, Dual, 1W, Rev. November 10. 2023 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tma.pdf) +DCDC-Converter TRACO TMA THT SIP-7 1W +0 +5 +5 +Converter_DCDC +Converter_DCDC_TRACO_TMA-05xxS_12xxS_Single_THT +DCDC-Converter, TRACO, TMA-05xxS, TMA-12xxS, Single, 1W, Rev. November 10. 2023 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tma.pdf) +DCDC-Converter TRACO TMA THT SIP-7 1W +0 +4 +4 +Converter_DCDC +Converter_DCDC_TRACO_TMA-15xxD_24xxD_Dual_THT +DCDC-Converter, TRACO, TMA-15xxD, TMA-25xxD, Dual, 1W, Rev. November 10. 2023 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tma.pdf) +DCDC-Converter TRACO TMA THT SIP-7 1W +0 +5 +5 +Converter_DCDC +Converter_DCDC_TRACO_TMA-15xxS_24xxS_Single_THT +DCDC-Converter, TRACO, TMA-15xxS, TMA-24xxS, Single, 1W, Rev. November 10. 2023 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tma.pdf) +DCDC-Converter TRACO TMA THT SIP-7 1W +0 +4 +4 +Converter_DCDC +Converter_DCDC_TRACO_TME_03xxS_05xxS_12xxS_Single_THT +DCDC-Converter, TRACO, TME-03xxS, TME-05xxS, TME-12xxS, 1W, Rev. September 26. 2023 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tme.pdf) +DCDC-Converter TRACO TME THT SIP-7 1W +0 +4 +4 +Converter_DCDC +Converter_DCDC_TRACO_TME_24xxS_Single_THT +DCDC-Converter, TRACO, TME-24xxS, 1W, Rev. September 26. 2023 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tme.pdf) +DCDC-Converter TRACO TME THT SIP-7 1W +0 +4 +4 +Converter_DCDC +Converter_DCDC_TRACO_TMR-1-xxxx_Dual_THT +DCDC-Converter, TRACO, TMR 1-xxxx, Dual output, Rev. March 21.2016 +DCDC-Converter TRACO TMR1-xxxx Dual_output +0 +5 +5 +Converter_DCDC +Converter_DCDC_TRACO_TMR-1-xxxx_Single_THT +DCDC-Converter, TRACO, TMR 1-xxxx, Single output, Rev. March 21.2016 +DCDC-Converter TRACO TMR1-xxxx Single_output +0 +4 +4 +Converter_DCDC +Converter_DCDC_TRACO_TMR-1SM_SMD +http://assets.tracopower.com/TMR1SM/documents/tmr1sm-datasheet.pdf +DCDC SMD TRACO TMR-1SM +0 +7 +7 +Converter_DCDC +Converter_DCDC_TRACO_TMR-2xxxxWI_THT +https://www.tracopower.com/products/tmr2wi.pdf +DCDC-Converter TRACO TMRxxxxWI Single/Dual_output +0 +7 +7 +Converter_DCDC +Converter_DCDC_TRACO_TMR-xxxx_THT +DCDC-Converter, TRACO, TMR xxxx, Single/Dual output, http://www.datasheetlib.com/datasheet/135136/tmr-2-2410e_traco-power.html?page=3#datasheet +DCDC-Converter TRACO TMRxxxx Single/Dual_output +0 +7 +7 +Converter_DCDC +Converter_DCDC_TRACO_TMR4-xxxxWI_THT +DCDC-Converter, TRACO, TMR4-xxxxWI, 4W, Rev. December 06. 2023 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tmr4wi.pdf) +DCDC-Converter TRACO TMR4WI THT SIP-8 4W +0 +7 +7 +Converter_DCDC +Converter_DCDC_TRACO_TMU3-05xx_12xx_THT +DCDC-Converter, TRACO, TMU3-05xx, TMU3-12xx, 3W, Rev. November 10. 2023 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tmu3.pdf) +DCDC-Converter TRACO TMU3 THT SIP-4 3W +0 +4 +4 +Converter_DCDC +Converter_DCDC_TRACO_TMU3-24xx_THT +DCDC-Converter, TRACO, TMU3-24xx, 3W, Rev. November 10. 2023 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tmu3.pdf) +DCDC-Converter TRACO TMU3 THT SIP-4 3W +0 +4 +4 +Converter_DCDC +Converter_DCDC_TRACO_TRI1-xxxx_THT +DCDC-Converter, TRACO, TRI1-xxxx, 1W, Rev. November 13. 2023 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tri1.pdf) +DCDC-Converter TRACO TRI1 THT SIP-7 1W +0 +4 +4 +Converter_DCDC +Converter_DCDC_TRACO_TSR-1_THT +DCDC-Converter, TRACO, TSR 1-xxxx +DCDC-Converter TRACO TSR-1 +0 +3 +3 +Converter_DCDC +Converter_DCDC_TRACO_TSR1-xxxxE_THT +DCDC-Converter, TRACO, TSR1-xxxxE, 1A, Rev. October 31. 2023 (Script generated with StandardBox.py) (https://www.tracopower.com/products/tsr1e.pdf) +DCDC-Converter SWITCHING-REGULATOR STEP-DOWN TRACO TSR1E 2.54MM THT SIP-3 1A +0 +3 +3 +Converter_DCDC +Converter_DCDC_XP_POWER-IA48xxD_THT +XP_POWER IA48xxD, DIP, (https://www.xppower.com/pdfs/SF_IA.pdf), generated with kicad-footprint-generator +XP_POWER IA48xxD DIP DCDC-Converter +0 +6 +6 +Converter_DCDC +Converter_DCDC_XP_POWER-IA48xxS_THT +XP_POWER IA48xxS, SIP, (https://www.xppower.com/pdfs/SF_IA.pdf), generated with kicad-footprint-generator +XP_POWER IA48xxS SIP DCDC-Converter +0 +5 +5 +Converter_DCDC +Converter_DCDC_XP_POWER-IAxxxxD_THT +XP_POWER IAxxxxD, DIP, (https://www.xppower.com/pdfs/SF_IA.pdf), generated with kicad-footprint-generator +XP_POWER IAxxxxD DIP DCDC-Converter +0 +6 +6 +Converter_DCDC +Converter_DCDC_XP_POWER-IAxxxxS_THT +XP_POWER IAxxxxS, SIP, (https://www.xppower.com/pdfs/SF_IA.pdf), generated with kicad-footprint-generator +XP_POWER IAxxxxS SIP DCDC-Converter +0 +5 +5 +Converter_DCDC +Converter_DCDC_XP_POWER-IHxxxxDH_THT +XP_POWER IHxxxxDH, DIP, (https://www.xppower.com/pdfs/SF_IH.pdf), generated with kicad-footprint-generator +XP_POWER IHxxxxDH DIP DCDC-Converter +0 +6 +6 +Converter_DCDC +Converter_DCDC_XP_POWER-IHxxxxD_THT +XP_POWER IHxxxxD, DIP, (https://www.xppower.com/pdfs/SF_IH.pdf), generated with kicad-footprint-generator +XP_POWER IHxxxxD DIP DCDC-Converter +0 +6 +6 +Converter_DCDC +Converter_DCDC_XP_POWER-IHxxxxSH_THT +XP_POWER IHxxxxSH, SIP, (https://www.xppower.com/pdfs/SF_IH.pdf), generated with kicad-footprint-generator +XP_POWER IHxxxxSH SIP DCDC-Converter +0 +5 +5 +Converter_DCDC +Converter_DCDC_XP_POWER-IHxxxxS_THT +XP_POWER IHxxxxS, SIP, (https://www.xppower.com/pdfs/SF_IH.pdf), generated with kicad-footprint-generator +XP_POWER IHxxxxS SIP DCDC-Converter +0 +5 +5 +Converter_DCDC +Converter_DCDC_XP_POWER-ISU02_SMD +DCDC-Converter, XP POWER, ISU02 Series, 2W Single and Dual Output, 1500VDC Isolation, 19.0x17.0x8.7mm https://www.xppower.com/Portals/0/pdfs/SF_ISU02.pdf +DCDC SMD XP POWER ISU02 +0 +7 +7 +Converter_DCDC +Converter_DCDC_XP_POWER-ITQxxxxS-H_THT +XP_POWER ITQxxxxS-H, SIP, (https://www.xppower.com/pdfs/SF_ITQ.pdf), generated with kicad-footprint-generator +XP_POWER ITQxxxxS-H SIP DCDC-Converter +0 +6 +6 +Converter_DCDC +Converter_DCDC_XP_POWER-ITXxxxxSA_THT +XP_POWER ITXxxxxSA, SIP, (https://www.xppower.com/pdfs/SF_ITX.pdf), generated with kicad-footprint-generator +XP_POWER ITXxxxxSA SIP DCDC-Converter +0 +5 +5 +Converter_DCDC +Converter_DCDC_XP_POWER-ITxxxxxS_THT +XP_POWER ITxxxxxS, SIP, (https://www.xppower.com/portals/0/pdfs/SF_ITX.pdf https://www.xppower.com/portals/0/pdfs/SF_ITQ.pdf), generated with kicad-footprint-generator +XP_POWER ITxxxxxS SIP DCDC-Converter +0 +7 +7 +Converter_DCDC +Converter_DCDC_XP_POWER_JTDxxxxxxx_THT +XP Power JTD Series DC-DC Converter +DCDC Isolated +0 +6 +6 +Converter_DCDC +Converter_DCDC_XP_POWER_JTExxxxDxx_THT +DCDC-Converter, XP POWER, Type JTE06 Series, Dual Output +DCDC-Converter XP_POWER JTE06 Dual +0 +8 +8 +Converter_DCDC +Converter_DCDC_muRata_MEJ1DxxxxSC_THT +muRata MEJ1DxxxxSC, 19.5x9.8x12.5mm, 5.2kVDC Isolated, 1W, dual output, SIP package style, https://power.murata.com/data/power/ncl/kdc_mej1.pdf +muRata MEJ1D DCDC-Converter +0 +5 +5 +Converter_DCDC +Converter_DCDC_muRata_MEJ1SxxxxSC_THT +muRata MEJ1SxxxxSC, 19.5x9.8x12.5mm, 5.2kVDC Isolated, 1W, single output, SIP package style, https://power.murata.com/data/power/ncl/kdc_mej1.pdf +muRata MEJ1S DCDC-Converter +0 +4 +4 +Crystal +Crystal_AT310_D3.0mm_L10.0mm_Horizontal +Crystal THT AT310 10.0mm-10.5mm length 3.0mm diameter http://www.cinetech.com.tw/upload/2011/04/20110401165201.pdf +['AT310'] +0 +2 +2 +Crystal +Crystal_AT310_D3.0mm_L10.0mm_Horizontal_1EP_style1 +Crystal THT AT310 10.0mm-10.5mm length 3.0mm diameter http://www.cinetech.com.tw/upload/2011/04/20110401165201.pdf +['AT310'] +0 +3 +3 +Crystal +Crystal_AT310_D3.0mm_L10.0mm_Horizontal_1EP_style2 +Crystal THT AT310 10.0mm-10.5mm length 3.0mm diameter http://www.cinetech.com.tw/upload/2011/04/20110401165201.pdf +['AT310'] +0 +5 +3 +Crystal +Crystal_AT310_D3.0mm_L10.0mm_Vertical +Crystal THT AT310 10.0mm-10.5mm length 3.0mm diameter http://www.cinetech.com.tw/upload/2011/04/20110401165201.pdf +['AT310'] +0 +2 +2 +Crystal +Crystal_C26-LF_D2.1mm_L6.5mm_Horizontal +Crystal THT C26-LF 6.5mm length 2.06mm diameter +['C26-LF'] +0 +2 +2 +Crystal +Crystal_C26-LF_D2.1mm_L6.5mm_Horizontal_1EP_style1 +Crystal THT C26-LF 6.5mm length 2.06mm diameter +['C26-LF'] +0 +3 +3 +Crystal +Crystal_C26-LF_D2.1mm_L6.5mm_Horizontal_1EP_style2 +Crystal THT C26-LF 6.5mm length 2.06mm diameter +['C26-LF'] +0 +5 +3 +Crystal +Crystal_C26-LF_D2.1mm_L6.5mm_Vertical +Crystal THT C26-LF 6.5mm length 2.06mm diameter +['C26-LF'] +0 +2 +2 +Crystal +Crystal_C38-LF_D3.0mm_L8.0mm_Horizontal +Crystal THT C38-LF 8.0mm length 3.0mm diameter +['C38-LF'] +0 +2 +2 +Crystal +Crystal_C38-LF_D3.0mm_L8.0mm_Horizontal_1EP_style1 +Crystal THT C38-LF 8.0mm length 3.0mm diameter +['C38-LF'] +0 +3 +3 +Crystal +Crystal_C38-LF_D3.0mm_L8.0mm_Horizontal_1EP_style2 +Crystal THT C38-LF 8.0mm length 3.0mm diameter +['C38-LF'] +0 +5 +3 +Crystal +Crystal_C38-LF_D3.0mm_L8.0mm_Vertical +Crystal THT C38-LF 8.0mm length 3.0mm diameter +['C38-LF'] +0 +2 +2 +Crystal +Crystal_DS10_D1.0mm_L4.3mm_Horizontal +Crystal THT DS10 4.3mm length 1.0mm diameter http://www.microcrystal.com/images/_Product-Documentation/03_TF_metal_Packages/01_Datasheet/DS-Series.pdf +['DS10'] +0 +2 +2 +Crystal +Crystal_DS10_D1.0mm_L4.3mm_Horizontal_1EP_style1 +Crystal THT DS10 4.3mm length 1.0mm diameter http://www.microcrystal.com/images/_Product-Documentation/03_TF_metal_Packages/01_Datasheet/DS-Series.pdf +['DS10'] +0 +3 +3 +Crystal +Crystal_DS10_D1.0mm_L4.3mm_Horizontal_1EP_style2 +Crystal THT DS10 4.3mm length 1.0mm diameter http://www.microcrystal.com/images/_Product-Documentation/03_TF_metal_Packages/01_Datasheet/DS-Series.pdf +['DS10'] +0 +5 +3 +Crystal +Crystal_DS10_D1.0mm_L4.3mm_Vertical +Crystal THT DS10 4.3mm length 1.0mm diameter http://www.microcrystal.com/images/_Product-Documentation/03_TF_metal_Packages/01_Datasheet/DS-Series.pdf +['DS10'] +0 +2 +2 +Crystal +Crystal_DS15_D1.5mm_L5.0mm_Horizontal +Crystal THT DS15 5.0mm length 1.5mm diameter http://www.microcrystal.com/images/_Product-Documentation/03_TF_metal_Packages/01_Datasheet/DS-Series.pdf +['DS15'] +0 +2 +2 +Crystal +Crystal_DS15_D1.5mm_L5.0mm_Horizontal_1EP_style1 +Crystal THT DS15 5.0mm length 1.5mm diameter http://www.microcrystal.com/images/_Product-Documentation/03_TF_metal_Packages/01_Datasheet/DS-Series.pdf +['DS15'] +0 +3 +3 +Crystal +Crystal_DS15_D1.5mm_L5.0mm_Horizontal_1EP_style2 +Crystal THT DS15 5.0mm length 1.5mm diameter http://www.microcrystal.com/images/_Product-Documentation/03_TF_metal_Packages/01_Datasheet/DS-Series.pdf +['DS15'] +0 +5 +3 +Crystal +Crystal_DS15_D1.5mm_L5.0mm_Vertical +Crystal THT DS15 5.0mm length 1.5mm diameter http://www.microcrystal.com/images/_Product-Documentation/03_TF_metal_Packages/01_Datasheet/DS-Series.pdf +['DS15'] +0 +2 +2 +Crystal +Crystal_DS26_D2.0mm_L6.0mm_Horizontal +Crystal THT DS26 6.0mm length 2.0mm diameter http://www.microcrystal.com/images/_Product-Documentation/03_TF_metal_Packages/01_Datasheet/DS-Series.pdf +['DS26'] +0 +2 +2 +Crystal +Crystal_DS26_D2.0mm_L6.0mm_Horizontal_1EP_style1 +Crystal THT DS26 6.0mm length 2.0mm diameter http://www.microcrystal.com/images/_Product-Documentation/03_TF_metal_Packages/01_Datasheet/DS-Series.pdf +['DS26'] +0 +3 +3 +Crystal +Crystal_DS26_D2.0mm_L6.0mm_Horizontal_1EP_style2 +Crystal THT DS26 6.0mm length 2.0mm diameter http://www.microcrystal.com/images/_Product-Documentation/03_TF_metal_Packages/01_Datasheet/DS-Series.pdf +['DS26'] +0 +5 +3 +Crystal +Crystal_DS26_D2.0mm_L6.0mm_Vertical +Crystal THT DS26 6.0mm length 2.0mm diameter http://www.microcrystal.com/images/_Product-Documentation/03_TF_metal_Packages/01_Datasheet/DS-Series.pdf +['DS26'] +0 +2 +2 +Crystal +Crystal_HC18-U_Horizontal +Crystal THT HC-18/U http://5hertz.com/pdfs/04404_D.pdf +THT crystal +0 +2 +2 +Crystal +Crystal_HC18-U_Horizontal_1EP_style1 +Crystal THT HC-18/U http://5hertz.com/pdfs/04404_D.pdf +THT crystal +0 +3 +3 +Crystal +Crystal_HC18-U_Horizontal_1EP_style2 +Crystal THT HC-18/U http://5hertz.com/pdfs/04404_D.pdf +THT crystal +0 +5 +3 +Crystal +Crystal_HC18-U_Vertical +Crystal THT HC-18/U, http://5hertz.com/pdfs/04404_D.pdf +THT crystalHC-18/U +0 +2 +2 +Crystal +Crystal_HC33-U_Horizontal +Crystal THT HC-33/U http://pdi.bentech-taiwan.com/PDI/GEN20SPEV20HC3320U.pdf +THT crystal +0 +2 +2 +Crystal +Crystal_HC33-U_Horizontal_1EP_style1 +Crystal THT HC-33/U http://pdi.bentech-taiwan.com/PDI/GEN20SPEV20HC3320U.pdf +THT crystal +0 +3 +3 +Crystal +Crystal_HC33-U_Horizontal_1EP_style2 +Crystal THT HC-33/U http://pdi.bentech-taiwan.com/PDI/GEN20SPEV20HC3320U.pdf +THT crystal +0 +5 +3 +Crystal +Crystal_HC33-U_Vertical +Crystal THT HC-33/U, http://pdi.bentech-taiwan.com/PDI/GEN20SPEV20HC3320U.pdf +THT crystalHC-33/U +0 +2 +2 +Crystal +Crystal_HC35-U +Crystal, Quarz, HC35/U, http://www.kvg-gmbh.de/assets/uploads/files/product_pdfs/TO71xx.pdf +Crystal Quarz HC35/U +0 +3 +3 +Crystal +Crystal_HC49-4H_Vertical +Crystal THT HC-49-4H http://5hertz.com/pdfs/04404_D.pdf +THT crystalHC-49-4H +0 +2 +2 +Crystal +Crystal_HC49-U-3Pin_Vertical +Crystal THT HC-49/U, 3pin-version, http://www.raltron.com/products/pdfspecs/crystal_hc_49_45_51.pdf +THT crystalHC-49/U +0 +3 +3 +Crystal +Crystal_HC49-U_Horizontal +Crystal THT HC-49/U http://5hertz.com/pdfs/04404_D.pdf +THT crystal +0 +2 +2 +Crystal +Crystal_HC49-U_Horizontal_1EP_style1 +Crystal THT HC-49/U http://5hertz.com/pdfs/04404_D.pdf +THT crystal +0 +3 +3 +Crystal +Crystal_HC49-U_Horizontal_1EP_style2 +Crystal THT HC-49/U http://5hertz.com/pdfs/04404_D.pdf +THT crystal +0 +5 +3 +Crystal +Crystal_HC49-U_Vertical +Crystal THT HC-49/U http://5hertz.com/pdfs/04404_D.pdf +THT crystalHC-49/U +0 +2 +2 +Crystal +Crystal_HC50_Horizontal +Crystal THT HC-50 http://www.crovencrystals.com/croven_pdf/HC-50_Crystal_Holder_Rev_00.pdf +THT crystal +0 +2 +2 +Crystal +Crystal_HC50_Horizontal_1EP_style1 +Crystal THT HC-50 http://www.crovencrystals.com/croven_pdf/HC-50_Crystal_Holder_Rev_00.pdf +THT crystal +0 +3 +3 +Crystal +Crystal_HC50_Horizontal_1EP_style2 +Crystal THT HC-50 http://www.crovencrystals.com/croven_pdf/HC-50_Crystal_Holder_Rev_00.pdf +THT crystal +0 +5 +3 +Crystal +Crystal_HC50_Vertical +Crystal THT HC-50, http://www.crovencrystals.com/croven_pdf/HC-50_Crystal_Holder_Rev_00.pdf +THT crystalHC-50 +0 +2 +2 +Crystal +Crystal_HC51-U_Vertical +Crystal THT HC-51/U, http://www.crovencrystals.com/croven_pdf/HC-51_Crystal_Holder_Rev_00.pdf +THT crystalHC-51/U +0 +2 +2 +Crystal +Crystal_HC51_Horizontal +Crystal THT HC-51 http://www.crovencrystals.com/croven_pdf/HC-51_Crystal_Holder_Rev_00.pdf +THT crystal +0 +2 +2 +Crystal +Crystal_HC51_Horizontal_1EP_style1 +Crystal THT HC-51 http://www.crovencrystals.com/croven_pdf/HC-51_Crystal_Holder_Rev_00.pdf +THT crystal +0 +3 +3 +Crystal +Crystal_HC51_Horizontal_1EP_style2 +Crystal THT HC-51 http://www.crovencrystals.com/croven_pdf/HC-51_Crystal_Holder_Rev_00.pdf +THT crystal +0 +5 +3 +Crystal +Crystal_HC52-6mm_Horizontal +Crystal THT HC-51/6mm http://www.kvg-gmbh.de/assets/uploads/files/product_pdfs/XS71xx.pdf +THT crystal +0 +2 +2 +Crystal +Crystal_HC52-6mm_Horizontal_1EP_style1 +Crystal THT HC-51/6mm http://www.kvg-gmbh.de/assets/uploads/files/product_pdfs/XS71xx.pdf +THT crystal +0 +3 +3 +Crystal +Crystal_HC52-6mm_Horizontal_1EP_style2 +Crystal THT HC-51/6mm http://www.kvg-gmbh.de/assets/uploads/files/product_pdfs/XS71xx.pdf +THT crystal +0 +5 +3 +Crystal +Crystal_HC52-6mm_Vertical +Crystal THT HC-52/6mm, http://www.kvg-gmbh.de/assets/uploads/files/product_pdfs/XS71xx.pdf +THT crystalHC-49/U +0 +2 +2 +Crystal +Crystal_HC52-8mm_Horizontal +Crystal THT HC-51/8mm http://www.kvg-gmbh.de/assets/uploads/files/product_pdfs/XS71xx.pdf +THT crystal +0 +2 +2 +Crystal +Crystal_HC52-8mm_Horizontal_1EP_style1 +Crystal THT HC-51/8mm http://www.kvg-gmbh.de/assets/uploads/files/product_pdfs/XS71xx.pdf +THT crystal +0 +3 +3 +Crystal +Crystal_HC52-8mm_Horizontal_1EP_style2 +Crystal THT HC-51/8mm http://www.kvg-gmbh.de/assets/uploads/files/product_pdfs/XS71xx.pdf +THT crystal +0 +5 +3 +Crystal +Crystal_HC52-8mm_Vertical +Crystal THT HC-52/8mm, http://www.kvg-gmbh.de/assets/uploads/files/product_pdfs/XS71xx.pdf +THT crystalHC-49/U +0 +2 +2 +Crystal +Crystal_HC52-U-3Pin_Vertical +Crystal THT HC-52/U, http://www.kvg-gmbh.de/assets/uploads/files/product_pdfs/XS71xx.pdf +THT crystalHC-52/U +0 +3 +3 +Crystal +Crystal_HC52-U_Horizontal +Crystal THT HC-51/U http://www.kvg-gmbh.de/assets/uploads/files/product_pdfs/XS71xx.pdf +THT crystal +0 +2 +2 +Crystal +Crystal_HC52-U_Horizontal_1EP_style1 +Crystal THT HC-51/U http://www.kvg-gmbh.de/assets/uploads/files/product_pdfs/XS71xx.pdf +THT crystal +0 +3 +3 +Crystal +Crystal_HC52-U_Horizontal_1EP_style2 +Crystal THT HC-51/U http://www.kvg-gmbh.de/assets/uploads/files/product_pdfs/XS71xx.pdf +THT crystal +0 +5 +3 +Crystal +Crystal_HC52-U_Vertical +Crystal THT HC-52/U, http://www.kvg-gmbh.de/assets/uploads/files/product_pdfs/XS71xx.pdf +THT crystal HC-52/U +0 +2 +2 +Crystal +Crystal_Round_D1.0mm_Vertical +Crystal THT DS10 1.0mm diameter http://www.microcrystal.com/images/_Product-Documentation/03_TF_metal_Packages/01_Datasheet/DS-Series.pdf +['DS10'] +0 +2 +2 +Crystal +Crystal_Round_D1.5mm_Vertical +Crystal THT DS15 5.0mm length 1.5mm diameter http://www.microcrystal.com/images/_Product-Documentation/03_TF_metal_Packages/01_Datasheet/DS-Series.pdf +['DS15'] +0 +2 +2 +Crystal +Crystal_Round_D2.0mm_Vertical +Crystal THT DS26 6.0mm length 2.0mm diameter http://www.microcrystal.com/images/_Product-Documentation/03_TF_metal_Packages/01_Datasheet/DS-Series.pdf +['DS26'] +0 +2 +2 +Crystal +Crystal_Round_D3.0mm_Vertical +Crystal THT C38-LF 8.0mm length 3.0mm diameter +['C38-LF'] +0 +2 +2 +Crystal +Crystal_SMD_0603-2Pin_6.0x3.5mm +SMD Crystal SERIES SMD0603/2 http://www.petermann-technik.de/fileadmin/petermann/pdf/SMD0603-2.pdf, 6.0x3.5mm^2 package +SMD SMT crystal +0 +2 +2 +Crystal +Crystal_SMD_0603-2Pin_6.0x3.5mm_HandSoldering +SMD Crystal SERIES SMD0603/2 http://www.petermann-technik.de/fileadmin/petermann/pdf/SMD0603-2.pdf, hand-soldering, 6.0x3.5mm^2 package +SMD SMT crystal hand-soldering +0 +2 +2 +Crystal +Crystal_SMD_0603-4Pin_6.0x3.5mm +SMD Crystal SERIES SMD0603/4 http://www.petermann-technik.de/fileadmin/petermann/pdf/SMD0603-4.pdf, 6.0x3.5mm^2 package +SMD SMT crystal +0 +4 +4 +Crystal +Crystal_SMD_0603-4Pin_6.0x3.5mm_HandSoldering +SMD Crystal SERIES SMD0603/4 http://www.petermann-technik.de/fileadmin/petermann/pdf/SMD0603-4.pdf, hand-soldering, 6.0x3.5mm^2 package +SMD SMT crystal hand-soldering +0 +4 +4 +Crystal +Crystal_SMD_2012-2Pin_2.0x1.2mm +SMD Crystal 2012/2 http://txccrystal.com/images/pdf/9ht11.pdf, 2.0x1.2mm^2 package +SMD SMT crystal +0 +2 +2 +Crystal +Crystal_SMD_2012-2Pin_2.0x1.2mm_HandSoldering +SMD Crystal 2012/2 http://txccrystal.com/images/pdf/9ht11.pdf, hand-soldering, 2.0x1.2mm^2 package +SMD SMT crystal hand-soldering +0 +2 +2 +Crystal +Crystal_SMD_2016-4Pin_2.0x1.6mm +SMD Crystal SERIES SMD2016/4 http://www.q-crystal.com/upload/5/2015552223166229.pdf, 2.0x1.6mm^2 package +SMD SMT crystal +0 +4 +4 +Crystal +Crystal_SMD_2520-4Pin_2.5x2.0mm +SMD Crystal SERIES SMD2520/4 http://www.newxtal.com/UploadFiles/Images/2012-11-12-09-29-09-776.pdf, 2.5x2.0mm^2 package +SMD SMT crystal +0 +4 +4 +Crystal +Crystal_SMD_3215-2Pin_3.2x1.5mm +SMD Crystal FC-135 https://support.epson.biz/td/api/doc_check.php?dl=brief_FC-135R_en.pdf +SMD SMT Crystal +0 +2 +2 +Crystal +Crystal_SMD_3225-4Pin_3.2x2.5mm +SMD Crystal SERIES SMD3225/4 http://www.txccrystal.com/images/pdf/7m-accuracy.pdf, 3.2x2.5mm^2 package +SMD SMT crystal +0 +4 +4 +Crystal +Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering +SMD Crystal SERIES SMD3225/4 http://www.txccrystal.com/images/pdf/7m-accuracy.pdf, hand-soldering, 3.2x2.5mm^2 package +SMD SMT crystal hand-soldering +0 +4 +4 +Crystal +Crystal_SMD_5032-2Pin_5.0x3.2mm +SMD Crystal SERIES SMD2520/2 http://www.icbase.com/File/PDF/HKC/HKC00061008.pdf, 5.0x3.2mm^2 package +SMD SMT crystal +0 +2 +2 +Crystal +Crystal_SMD_5032-2Pin_5.0x3.2mm_HandSoldering +SMD Crystal SERIES SMD2520/2 http://www.icbase.com/File/PDF/HKC/HKC00061008.pdf, hand-soldering, 5.0x3.2mm^2 package +SMD SMT crystal hand-soldering +0 +2 +2 +Crystal +Crystal_SMD_5032-4Pin_5.0x3.2mm +SMD Crystal SERIES SMD2520/4 http://www.icbase.com/File/PDF/HKC/HKC00061008.pdf, 5.0x3.2mm^2 package +SMD SMT crystal +0 +4 +4 +Crystal +Crystal_SMD_7050-2Pin_7.0x5.0mm +SMD Crystal SERIES SMD7050/4 https://www.foxonline.com/pdfs/FQ7050.pdf, 7.0x5.0mm^2 package +SMD SMT crystal +0 +2 +2 +Crystal +Crystal_SMD_7050-2Pin_7.0x5.0mm_HandSoldering +SMD Crystal SERIES SMD7050/4 https://www.foxonline.com/pdfs/FQ7050.pdf, hand-soldering, 7.0x5.0mm^2 package +SMD SMT crystal hand-soldering +0 +2 +2 +Crystal +Crystal_SMD_7050-4Pin_7.0x5.0mm +SMD Crystal SERIES SMD7050/4 https://www.foxonline.com/pdfs/FQ7050.pdf, 7.0x5.0mm^2 package +SMD SMT crystal +0 +4 +4 +Crystal +Crystal_SMD_Abracon_ABM3-2Pin_5.0x3.2mm +Abracon Miniature Ceramic Smd Crystal ABM3 http://www.abracon.com/Resonators/abm3.pdf, 5.0x3.2mm^2 package +SMD SMT crystal +0 +2 +2 +Crystal +Crystal_SMD_Abracon_ABM3-2Pin_5.0x3.2mm_HandSoldering +Abracon Miniature Ceramic Smd Crystal ABM3 http://www.abracon.com/Resonators/abm3.pdf, hand-soldering, 5.0x3.2mm^2 package +SMD SMT crystal hand-soldering +0 +2 +2 +Crystal +Crystal_SMD_Abracon_ABM3B-4Pin_5.0x3.2mm +Abracon Miniature Ceramic Smd Crystal ABM3B http://www.abracon.com/Resonators/abm3b.pdf, 5.0x3.2mm^2 package +SMD SMT crystal +0 +4 +4 +Crystal +Crystal_SMD_Abracon_ABM3C-4Pin_5.0x3.2mm +Abracon Miniature Ceramic Smd Crystal ABM3C http://www.abracon.com/Resonators/abm3c.pdf, 5.0x3.2mm^2 package +SMD SMT crystal +0 +4 +4 +Crystal +Crystal_SMD_Abracon_ABM7-2Pin_6.0x3.5mm +SMD Crystal Abracon ABM7, https://abracon.com/Resonators/abm7.pdf +SMD SMT crystal +0 +2 +2 +Crystal +Crystal_SMD_Abracon_ABM8AIG-4Pin_3.2x2.5mm +Abracon Miniature Ceramic Smd Crystal ABM8AIG https://abracon.com/AIGcrystals/ABM8AIG.pdf, 3.2x2.5mm^2 package +SMD SMT crystal +0 +4 +4 +Crystal +Crystal_SMD_Abracon_ABM8G-4Pin_3.2x2.5mm +Abracon Miniature Ceramic Smd Crystal ABM8G http://www.abracon.com/Resonators/ABM8G.pdf, 3.2x2.5mm^2 package +SMD SMT crystal +0 +4 +4 +Crystal +Crystal_SMD_Abracon_ABM10-4Pin_2.5x2.0mm +Abracon Miniature Ceramic Smd Crystal ABM10 http://www.abracon.com/Resonators/ABM10.pdf +SMD SMT crystal Abracon ABM10 +0 +4 +4 +Crystal +Crystal_SMD_Abracon_ABS25-4Pin_8.0x3.8mm +Abracon Miniature Ceramic SMD Crystal ABS25 https://abracon.com/Resonators/abs25.pdf, 8.0x3.8mm^2 package +SMD SMT crystal +0 +4 +4 +Crystal +Crystal_SMD_ECS_CSM3X-2Pin_7.6x4.1mm +http://www.ecsxtal.com/store/pdf/CSM-3X.pdf +Crystal CSM-3X +0 +2 +2 +Crystal +Crystal_SMD_EuroQuartz_EQ161-2Pin_3.2x1.5mm +SMD Crystal EuroQuartz EQ161 series http://cdn-reichelt.de/documents/datenblatt/B400/PG32768C.pdf, 3.2x1.5mm^2 package +SMD SMT crystal +0 +2 +2 +Crystal +Crystal_SMD_EuroQuartz_EQ161-2Pin_3.2x1.5mm_HandSoldering +SMD Crystal EuroQuartz EQ161 series http://cdn-reichelt.de/documents/datenblatt/B400/PG32768C.pdf, hand-soldering, 3.2x1.5mm^2 package +SMD SMT crystal hand-soldering +0 +2 +2 +Crystal +Crystal_SMD_EuroQuartz_MJ-4Pin_5.0x3.2mm +SMD Crystal EuroQuartz MJ series http://cdn-reichelt.de/documents/datenblatt/B400/MJ.pdf, 5.0x3.2mm^2 package +SMD SMT crystal +0 +4 +4 +Crystal +Crystal_SMD_EuroQuartz_MJ-4Pin_5.0x3.2mm_HandSoldering +SMD Crystal EuroQuartz MJ series http://cdn-reichelt.de/documents/datenblatt/B400/MJ.pdf, hand-soldering, 5.0x3.2mm^2 package +SMD SMT crystal hand-soldering +0 +4 +4 +Crystal +Crystal_SMD_EuroQuartz_MQ-4Pin_7.0x5.0mm +SMD Crystal EuroQuartz MQ series http://cdn-reichelt.de/documents/datenblatt/B400/MQ.pdf, 7.0x5.0mm^2 package +SMD SMT crystal +0 +4 +4 +Crystal +Crystal_SMD_EuroQuartz_MQ-4Pin_7.0x5.0mm_HandSoldering +SMD Crystal EuroQuartz MQ series http://cdn-reichelt.de/documents/datenblatt/B400/MQ.pdf, hand-soldering, 7.0x5.0mm^2 package +SMD SMT crystal hand-soldering +0 +4 +4 +Crystal +Crystal_SMD_EuroQuartz_MQ2-2Pin_7.0x5.0mm +SMD Crystal EuroQuartz MQ2 series http://cdn-reichelt.de/documents/datenblatt/B400/MQ.pdf, 7.0x5.0mm^2 package +SMD SMT crystal +0 +2 +2 +Crystal +Crystal_SMD_EuroQuartz_MQ2-2Pin_7.0x5.0mm_HandSoldering +SMD Crystal EuroQuartz MQ2 series http://cdn-reichelt.de/documents/datenblatt/B400/MQ.pdf, hand-soldering, 7.0x5.0mm^2 package +SMD SMT crystal hand-soldering +0 +2 +2 +Crystal +Crystal_SMD_EuroQuartz_MT-4Pin_3.2x2.5mm +SMD Crystal EuroQuartz MT series http://cdn-reichelt.de/documents/datenblatt/B400/MT.pdf, 3.2x2.5mm^2 package +SMD SMT crystal +0 +4 +4 +Crystal +Crystal_SMD_EuroQuartz_MT-4Pin_3.2x2.5mm_HandSoldering +SMD Crystal EuroQuartz MT series http://cdn-reichelt.de/documents/datenblatt/B400/MT.pdf, hand-soldering, 3.2x2.5mm^2 package +SMD SMT crystal hand-soldering +0 +4 +4 +Crystal +Crystal_SMD_EuroQuartz_X22-4Pin_2.5x2.0mm +SMD Crystal EuroQuartz X22 series http://cdn-reichelt.de/documents/datenblatt/B400/DS_X22.pdf, 2.5x2.0mm^2 package +SMD SMT crystal +0 +4 +4 +Crystal +Crystal_SMD_EuroQuartz_X22-4Pin_2.5x2.0mm_HandSoldering +SMD Crystal EuroQuartz X22 series http://cdn-reichelt.de/documents/datenblatt/B400/DS_X22.pdf, hand-soldering, 2.5x2.0mm^2 package +SMD SMT crystal hand-soldering +0 +4 +4 +Crystal +Crystal_SMD_FOX_FE-2Pin_7.5x5.0mm +crystal Ceramic Resin Sealed SMD http://www.foxonline.com/pdfs/fe.pdf, 7.5x5.0mm^2 package +SMD SMT crystal +0 +2 +2 +Crystal +Crystal_SMD_FOX_FE-2Pin_7.5x5.0mm_HandSoldering +crystal Ceramic Resin Sealed SMD http://www.foxonline.com/pdfs/fe.pdf, hand-soldering, 7.5x5.0mm^2 package +SMD SMT crystal hand-soldering +0 +2 +2 +Crystal +Crystal_SMD_FOX_FQ7050-2Pin_7.0x5.0mm +FOX SMD Crystal SERIES SMD7050/4 https://www.foxonline.com/pdfs/FQ7050.pdf, 7.0x5.0mm^2 package +SMD SMT crystal +0 +2 +2 +Crystal +Crystal_SMD_FOX_FQ7050-2Pin_7.0x5.0mm_HandSoldering +FOX SMD Crystal SERIES SMD7050/4 https://www.foxonline.com/pdfs/FQ7050.pdf, hand-soldering, 7.0x5.0mm^2 package +SMD SMT crystal hand-soldering +0 +2 +2 +Crystal +Crystal_SMD_FOX_FQ7050-4Pin_7.0x5.0mm +FOX SMD Crystal SERIES SMD7050/4 https://www.foxonline.com/pdfs/FQ7050.pdf, 7.0x5.0mm^2 package +SMD SMT crystal +0 +4 +4 +Crystal +Crystal_SMD_FrontierElectronics_FM206 +SMD Watch Crystal FrontierElectronics FM206 6.0mm length 1.9mm diameter http://www.chinafronter.com/wp-content/uploads/2013/12/FM206.pdf +['FM206'] +0 +3 +3 +Crystal +Crystal_SMD_G8-2Pin_3.2x1.5mm +SMD Crystal G8, 3.2x1.5mm^2 package +SMD SMT crystal +0 +2 +2 +Crystal +Crystal_SMD_G8-2Pin_3.2x1.5mm_HandSoldering +SMD Crystal G8, hand-soldering, 3.2x1.5mm^2 package +SMD SMT crystal hand-soldering +0 +2 +2 +Crystal +Crystal_SMD_HC49-SD +SMD Crystal HC-49-SD http://cdn-reichelt.de/documents/datenblatt/B400/xxx-HC49-SMD.pdf, 11.4x4.7mm^2 package +SMD SMT crystal +0 +2 +2 +Crystal +Crystal_SMD_HC49-SD_HandSoldering +SMD Crystal HC-49-SD http://cdn-reichelt.de/documents/datenblatt/B400/xxx-HC49-SMD.pdf, hand-soldering, 11.4x4.7mm^2 package +SMD SMT crystal hand-soldering +0 +2 +2 +Crystal +Crystal_SMD_MicroCrystal_CC1V-T1A-2Pin_8.0x3.7mm +SMD Crystal MicroCrystal CC1V-T1A series https://www.microcrystal.com/fileadmin/Media/Products/32kHz/Datasheet/CC1V-T1A.pdf, 8.0x3.7mm^2 package +SMD SMT crystal +0 +2 +2 +Crystal +Crystal_SMD_MicroCrystal_CC1V-T1A-2Pin_8.0x3.7mm_HandSoldering +SMD Crystal MicroCrystal CC1V-T1A series https://www.microcrystal.com/fileadmin/Media/Products/32kHz/Datasheet/CC1V-T1A.pdf, hand-soldering, 8.0x3.7mm^2 package +SMD SMT crystal hand-soldering +0 +2 +2 +Crystal +Crystal_SMD_MicroCrystal_CC4V-T1A-2Pin_5.0x1.9mm +SMD Crystal MicroCrystal CC4V-T1A series http://cdn-reichelt.de/documents/datenblatt/B400/CC4V-T1A.pdf, 5.0x1.9mm^2 package +SMD SMT crystal +0 +2 +2 +Crystal +Crystal_SMD_MicroCrystal_CC4V-T1A-2Pin_5.0x1.9mm_HandSoldering +SMD Crystal MicroCrystal CC4V-T1A series http://cdn-reichelt.de/documents/datenblatt/B400/CC4V-T1A.pdf, hand-soldering, 5.0x1.9mm^2 package +SMD SMT crystal hand-soldering +0 +2 +2 +Crystal +Crystal_SMD_MicroCrystal_CC5V-T1A-2Pin_4.1x1.5mm +SMD Crystal MicroCrystal CC5V-T1A series http://cdn-reichelt.de/documents/datenblatt/B400/CC5V-T1A.pdf, 4.1x1.5mm^2 package +SMD SMT crystal +0 +2 +2 +Crystal +Crystal_SMD_MicroCrystal_CC5V-T1A-2Pin_4.1x1.5mm_HandSoldering +SMD Crystal MicroCrystal CC5V-T1A series http://cdn-reichelt.de/documents/datenblatt/B400/CC5V-T1A.pdf, hand-soldering, 4.1x1.5mm^2 package +SMD SMT crystal hand-soldering +0 +2 +2 +Crystal +Crystal_SMD_MicroCrystal_CC7V-T1A-2Pin_3.2x1.5mm +SMD Crystal MicroCrystal CC7V-T1A/CM7V-T1A series https://www.microcrystal.com/fileadmin/Media/Products/32kHz/Datasheet/CC7V-T1A.pdf, 3.2x1.5mm^2 package +SMD SMT crystal +0 +2 +2 +Crystal +Crystal_SMD_MicroCrystal_CC7V-T1A-2Pin_3.2x1.5mm_HandSoldering +SMD Crystal MicroCrystal CC7V-T1A/CM7V-T1A series http://www.microcrystal.com/images/_Product-Documentation/01_TF_ceramic_Packages/01_Datasheet/CC1V-T1A.pdf, hand-soldering, 3.2x1.5mm^2 package +SMD SMT crystal hand-soldering +0 +2 +2 +Crystal +Crystal_SMD_MicroCrystal_CC8V-T1A-2Pin_2.0x1.2mm +SMD Crystal MicroCrystal CC8V-T1A/CM8V-T1A series https://www.microcrystal.com/fileadmin/Media/Products/32kHz/Datasheet/CC8V-T1A.pdf, 2.0x1.2mm^2 package +SMD SMT crystal +0 +2 +2 +Crystal +Crystal_SMD_MicroCrystal_CC8V-T1A-2Pin_2.0x1.2mm_HandSoldering +SMD Crystal MicroCrystal CC8V-T1A/CM8V-T1A series http://www.microcrystal.com/images/_Product-Documentation/01_TF_ceramic_Packages/01_Datasheet/CC8V-T1A.pdf, hand-soldering, 2.0x1.2mm^2 package +SMD SMT crystal hand-soldering +0 +2 +2 +Crystal +Crystal_SMD_MicroCrystal_CM9V-T1A-2Pin_1.6x1.0mm +SMD Crystal MicroCrystal CM9V-T1A series https://www.microcrystal.com/fileadmin/Media/Products/32kHz/Datasheet/CM9V-T1A.pdf, 1.6x1.0mm^2 package +SMD SMT crystal +0 +2 +2 +Crystal +Crystal_SMD_MicroCrystal_CM9V-T1A-2Pin_1.6x1.0mm_HandSoldering +SMD Crystal MicroCrystal CM9V-T1A series http://www.microcrystal.com/images/_Product-Documentation/01_TF_ceramic_Packages/01_Datasheet/CM9V-T1A.pdf, hand-soldering, 1.6x1.0mm^2 package +SMD SMT crystal hand-soldering +0 +2 +2 +Crystal +Crystal_SMD_MicroCrystal_MS1V-T1K +SMD Watch Crystal MicroCrystal MS1V-T1K 6.1mm length 2.0mm diameter http://www.microcrystal.com/images/_Product-Documentation/03_TF_metal_Packages/01_Datasheet/MS1V-T1K.pdf +['MS1V-T1K'] +0 +3 +3 +Crystal +Crystal_SMD_MicroCrystal_MS3V-T1R +SMD Watch Crystal MicroCrystal MS3V-T1R 5.2mm length 1.4mm diameter http://www.microcrystal.com/images/_Product-Documentation/03_TF_metal_Packages/01_Datasheet/MS3V-T1R.pdf +['MS3V-T1R'] +0 +3 +3 +Crystal +Crystal_SMD_Qantek_QC5CB-2Pin_5x3.2mm +SMD Crystal Qantek QC5CB, https://www.qantek.com/tl_files/products/crystals/QC5CB.pdf +SMD SMT crystal +0 +2 +2 +Crystal +Crystal_SMD_SeikoEpson_FA128-4Pin_2.0x1.6mm +crystal Epson Toyocom FA-128 (https://support.epson.biz/td/api/doc_check.php?dl=brief_FA-128&lang=en), 2x1.6mm^2 package +SMD SMT crystal +0 +4 +4 +Crystal +Crystal_SMD_SeikoEpson_FA238-4Pin_3.2x2.5mm +crystal Epson Toyocom FA-238 https://support.epson.biz/td/api/doc_check.php?dl=brief_fa-238v_en.pdf, 3.2x2.5mm^2 package +SMD SMT crystal +0 +4 +4 +Crystal +Crystal_SMD_SeikoEpson_FA238-4Pin_3.2x2.5mm_HandSoldering +crystal Epson Toyocom FA-238 series https://support.epson.biz/td/api/doc_check.php?dl=brief_fa-238v_en.pdf, hand-soldering, 3.2x2.5mm^2 package +SMD SMT crystal hand-soldering +0 +4 +4 +Crystal +Crystal_SMD_SeikoEpson_FA238V-4Pin_3.2x2.5mm +crystal Epson Toyocom FA-238 series https://support.epson.biz/td/api/doc_check.php?dl=brief_fa-238v_en.pdf, 3.2x2.5mm^2 package +SMD SMT crystal +0 +4 +4 +Crystal +Crystal_SMD_SeikoEpson_FA238V-4Pin_3.2x2.5mm_HandSoldering +crystal Epson Toyocom FA-238 series http://www.mouser.com/ds/2/137/1721499-465440.pdf, hand-soldering, 3.2x2.5mm^2 package +SMD SMT crystal hand-soldering +0 +4 +4 +Crystal +Crystal_SMD_SeikoEpson_MA406-4Pin_11.7x4.0mm +SMD Crystal Seiko Epson MC-506 http://media.digikey.com/pdf/Data%20Sheets/Epson%20PDFs/MA-505,506.pdf, 11.7x4.0mm^2 package +SMD SMT crystal +0 +4 +4 +Crystal +Crystal_SMD_SeikoEpson_MA406-4Pin_11.7x4.0mm_HandSoldering +SMD Crystal Seiko Epson MC-506 http://media.digikey.com/pdf/Data%20Sheets/Epson%20PDFs/MA-505,506.pdf, hand-soldering, 11.7x4.0mm^2 package +SMD SMT crystal hand-soldering +0 +4 +4 +Crystal +Crystal_SMD_SeikoEpson_MA505-2Pin_12.7x5.1mm +SMD Crystal Seiko Epson MC-505 http://media.digikey.com/pdf/Data%20Sheets/Epson%20PDFs/MA-505,506.pdf, 12.7x5.1mm^2 package +SMD SMT crystal +0 +2 +2 +Crystal +Crystal_SMD_SeikoEpson_MA505-2Pin_12.7x5.1mm_HandSoldering +SMD Crystal Seiko Epson MC-505 http://media.digikey.com/pdf/Data%20Sheets/Epson%20PDFs/MA-505,506.pdf, hand-soldering, 12.7x5.1mm^2 package +SMD SMT crystal hand-soldering +0 +2 +2 +Crystal +Crystal_SMD_SeikoEpson_MA506-4Pin_12.7x5.1mm +SMD Crystal Seiko Epson MC-506 http://media.digikey.com/pdf/Data%20Sheets/Epson%20PDFs/MA-505,506.pdf, 12.7x5.1mm^2 package +SMD SMT crystal +0 +4 +4 +Crystal +Crystal_SMD_SeikoEpson_MA506-4Pin_12.7x5.1mm_HandSoldering +SMD Crystal Seiko Epson MC-506 http://media.digikey.com/pdf/Data%20Sheets/Epson%20PDFs/MA-505,506.pdf, hand-soldering, 12.7x5.1mm^2 package +SMD SMT crystal hand-soldering +0 +4 +4 +Crystal +Crystal_SMD_SeikoEpson_MC146-4Pin_6.7x1.5mm +SMD Crystal Seiko Epson MC-146 https://support.epson.biz/td/api/doc_check.php?dl=brief_MC-156_en.pdf, 6.7x1.5mm^2 package +SMD SMT crystal +0 +4 +4 +Crystal +Crystal_SMD_SeikoEpson_MC146-4Pin_6.7x1.5mm_HandSoldering +SMD Crystal Seiko Epson MC-146 https://support.epson.biz/td/api/doc_check.php?dl=brief_MC-156_en.pdf, hand-soldering, 6.7x1.5mm^2 package +SMD SMT crystal hand-soldering +0 +4 +4 +Crystal +Crystal_SMD_SeikoEpson_MC156-4Pin_7.1x2.5mm +SMD Crystal Seiko Epson MC-156 https://support.epson.biz/td/api/doc_check.php?dl=brief_MC-156_en.pdf, 7.1x2.5mm^2 package +SMD SMT crystal +0 +4 +4 +Crystal +Crystal_SMD_SeikoEpson_MC156-4Pin_7.1x2.5mm_HandSoldering +SMD Crystal Seiko Epson MC-156 https://support.epson.biz/td/api/doc_check.php?dl=brief_MC-156_en.pdf, hand-soldering, 7.1x2.5mm^2 package +SMD SMT crystal hand-soldering +0 +4 +4 +Crystal +Crystal_SMD_SeikoEpson_MC306-4Pin_8.0x3.2mm +SMD Crystal Seiko Epson MC-306 https://support.epson.biz/td/api/doc_check.php?dl=brief_MC-306_en.pdf, 8.0x3.2mm^2 package +SMD SMT crystal +0 +4 +4 +Crystal +Crystal_SMD_SeikoEpson_MC306-4Pin_8.0x3.2mm_HandSoldering +SMD Crystal Seiko Epson MC-306 https://support.epson.biz/td/api/doc_check.php?dl=brief_MC-306_en.pdf, hand-soldering, 8.0x3.2mm^2 package +SMD SMT crystal hand-soldering +0 +4 +4 +Crystal +Crystal_SMD_SeikoEpson_MC405-2Pin_9.6x4.1mm +SMD Crystal Seiko Epson MC-405 https://support.epson.biz/td/api/doc_check.php?dl=brief_MC-306_en.pdf, 9.6x4.1mm^2 package +SMD SMT crystal +0 +2 +2 +Crystal +Crystal_SMD_SeikoEpson_MC405-2Pin_9.6x4.1mm_HandSoldering +SMD Crystal Seiko Epson MC-405 https://support.epson.biz/td/api/doc_check.php?dl=brief_MC-306_en.pdf, hand-soldering, 9.6x4.1mm^2 package +SMD SMT crystal hand-soldering +0 +2 +2 +Crystal +Crystal_SMD_SeikoEpson_MC406-4Pin_9.6x4.1mm +SMD Crystal Seiko Epson MC-406 https://support.epson.biz/td/api/doc_check.php?dl=brief_MC-306_en.pdf, 9.6x4.1mm^2 package +SMD SMT crystal +0 +4 +4 +Crystal +Crystal_SMD_SeikoEpson_MC406-4Pin_9.6x4.1mm_HandSoldering +SMD Crystal Seiko Epson MC-406 https://support.epson.biz/td/api/doc_check.php?dl=brief_MC-306_en.pdf, hand-soldering, 9.6x4.1mm^2 package +SMD SMT crystal hand-soldering +0 +4 +4 +Crystal +Crystal_SMD_SeikoEpson_TSX3225-4Pin_3.2x2.5mm +crystal Epson Toyocom TSX-3225 series https://support.epson.biz/td/api/doc_check.php?dl=brief_fa-238v_en.pdf, 3.2x2.5mm^2 package +SMD SMT crystal +0 +4 +4 +Crystal +Crystal_SMD_SeikoEpson_TSX3225-4Pin_3.2x2.5mm_HandSoldering +crystal Epson Toyocom TSX-3225 series https://support.epson.biz/td/api/doc_check.php?dl=brief_fa-238v_en.pdf, hand-soldering, 3.2x2.5mm^2 package +SMD SMT crystal hand-soldering +0 +4 +4 +Crystal +Crystal_SMD_TXC_7A-2Pin_5x3.2mm +SMD Crystal TXC 7A http://txccrystal.com/images/pdf/7a.pdf +SMD SMT crystal +0 +2 +2 +Crystal +Crystal_SMD_TXC_7M-4Pin_3.2x2.5mm +SMD Crystal TXC 7M http://www.txccrystal.com/images/pdf/7m-accuracy.pdf, 3.2x2.5mm^2 package +SMD SMT crystal +0 +4 +4 +Crystal +Crystal_SMD_TXC_7M-4Pin_3.2x2.5mm_HandSoldering +SMD Crystal TXC 7M http://www.txccrystal.com/images/pdf/7m-accuracy.pdf, hand-soldering, 3.2x2.5mm^2 package +SMD SMT crystal hand-soldering +0 +4 +4 +Crystal +Crystal_SMD_TXC_9HT11-2Pin_2.0x1.2mm +SMD Crystal TXC 9HT11 http://txccrystal.com/images/pdf/9ht11.pdf, 2.0x1.2mm^2 package +SMD SMT crystal +0 +2 +2 +Crystal +Crystal_SMD_TXC_9HT11-2Pin_2.0x1.2mm_HandSoldering +SMD Crystal TXC 9HT11 http://txccrystal.com/images/pdf/9ht11.pdf, hand-soldering, 2.0x1.2mm^2 package +SMD SMT crystal hand-soldering +0 +2 +2 +Crystal +Crystal_SMD_TXC_AX_8045-2Pin_8.0x4.5mm +http://www.txccrystal.com/images/pdf/ax-automotive.pdf +SMD SMT crystal +0 +2 +2 +Crystal +Resonator-2Pin_W6.0mm_H3.0mm +Ceramic Resomator/Filter 6.0x3.0mm^2, length*width=6.0x3.0mm^2 package, package length=6.0mm, package width=3.0mm, 2 pins +THT ceramic resonator filter +0 +2 +2 +Crystal +Resonator-2Pin_W7.0mm_H2.5mm +Ceramic Resomator/Filter 7.0x2.5mm^2, length*width=7.0x2.5mm^2 package, package length=7.0mm, package width=2.5mm, 2 pins +THT ceramic resonator filter +0 +2 +2 +Crystal +Resonator-2Pin_W8.0mm_H3.5mm +Ceramic Resomator/Filter 8.0x3.5mm^2, length*width=8.0x3.5mm^2 package, package length=8.0mm, package width=3.5mm, 2 pins +THT ceramic resonator filter +0 +2 +2 +Crystal +Resonator-2Pin_W10.0mm_H5.0mm +Ceramic Resomator/Filter 10.0x5.0 RedFrequency MG/MT/MX series, http://www.red-frequency.com/download/datenblatt/redfrequency-datenblatt-ir-zta.pdf, length*width=10.0x5.0mm^2 package, package length=10.0mm, package width=5.0mm, 2 pins +THT ceramic resonator filter +0 +2 +2 +Crystal +Resonator-3Pin_W6.0mm_H3.0mm +Ceramic Resomator/Filter 6.0x3.0mm^2, length*width=6.0x3.0mm^2 package, package length=6.0mm, package width=3.0mm, 3 pins +THT ceramic resonator filter +0 +3 +3 +Crystal +Resonator-3Pin_W7.0mm_H2.5mm +Ceramic Resomator/Filter 7.0x2.5mm^2, length*width=7.0x2.5mm^2 package, package length=7.0mm, package width=2.5mm, 3 pins +THT ceramic resonator filter +0 +3 +3 +Crystal +Resonator-3Pin_W8.0mm_H3.5mm +Ceramic Resomator/Filter 8.0x3.5mm^2, length*width=8.0x3.5mm^2 package, package length=8.0mm, package width=3.5mm, 3 pins +THT ceramic resonator filter +0 +3 +3 +Crystal +Resonator-3Pin_W10.0mm_H5.0mm +Ceramic Resomator/Filter 10.0x5.0mm^2 RedFrequency MG/MT/MX series, http://www.red-frequency.com/download/datenblatt/redfrequency-datenblatt-ir-zta.pdf, length*width=10.0x5.0mm^2 package, package length=10.0mm, package width=5.0mm, 3 pins +THT ceramic resonator filter +0 +3 +3 +Crystal +Resonator_Murata_CSTLSxxxG-3Pin_W8.0mm_H3.0mm +Ceramic Resomator/Filter Murata CSTLSxxxG, http://www.murata.com/~/media/webrenewal/support/library/catalog/products/timingdevice/ceralock/p17e.ashx, length*width=8.0x3.0mm^2 package, package length=8.0mm, package width=3.0mm, 3 pins +THT ceramic resonator filter CSTLSxxxG +0 +3 +3 +Crystal +Resonator_Murata_CSTLSxxxX-3Pin_W5.5mm_H3.0mm +Ceramic Resomator/Filter Murata CSTLSxxxX, http://www.murata.com/~/media/webrenewal/support/library/catalog/products/timingdevice/ceralock/p17e.ashx, length*width=5.5x3.0mm^2 package, package length=5.5mm, package width=3.0mm, 3 pins +THT ceramic resonator filter CSTLSxxxX +0 +3 +3 +Crystal +Resonator_Murata_DSN6-3Pin_W7.0mm_H2.5mm +Ceramic Resomator/Filter Murata DSN6, http://cdn-reichelt.de/documents/datenblatt/B400/DSN6NC51H.pdf, length*width=7.0x2.5mm^2 package, package length=7.0mm, package width=2.5mm, 3 pins +THT ceramic resonator filter DSN6 +0 +3 +3 +Crystal +Resonator_Murata_DSS6-3Pin_W7.0mm_H2.5mm +Ceramic Resomator/Filter Murata DSS6, http://cdn-reichelt.de/documents/datenblatt/B400/DSN6NC51H.pdf, length*width=7.0x2.5mm^2 package, package length=7.0mm, package width=2.5mm, 3 pins +THT ceramic resonator filter DSS6 +0 +3 +3 +Crystal +Resonator_SMD-3Pin_7.2x3.0mm +SMD Resomator/Filter 7.2x3.0mm, Murata CSTCC8M00G53-R0; 8MHz resonator, SMD, Farnell (Element 14) #1170435, http://www.farnell.com/datasheets/19296.pdf?_ga=1.247244932.122297557.1475167906, 7.2x3.0mm^2 package +SMD SMT ceramic resonator filter filter +0 +3 +3 +Crystal +Resonator_SMD-3Pin_7.2x3.0mm_HandSoldering +SMD Resomator/Filter 7.2x3.0mm, Murata CSTCC8M00G53-R0; 8MHz resonator, SMD, Farnell (Element 14) #1170435, http://www.farnell.com/datasheets/19296.pdf?_ga=1.247244932.122297557.1475167906, hand-soldering, 7.2x3.0mm^2 package +SMD SMT ceramic resonator filter filter hand-soldering +0 +3 +3 +Crystal +Resonator_SMD_Murata_CDSCB-2Pin_4.5x2.0mm +SMD Resomator/Filter Murata CDSCB, http://cdn-reichelt.de/documents/datenblatt/B400/SFECV-107.pdf, 4.5x2.0mm^2 package +SMD SMT ceramic resonator filter filter +0 +2 +2 +Crystal +Resonator_SMD_Murata_CDSCB-2Pin_4.5x2.0mm_HandSoldering +SMD Resomator/Filter Murata CDSCB, http://cdn-reichelt.de/documents/datenblatt/B400/SFECV-107.pdf, hand-soldering, 4.5x2.0mm^2 package +SMD SMT ceramic resonator filter filter hand-soldering +0 +2 +2 +Crystal +Resonator_SMD_Murata_CSTCR_4.5x2x1.15mm +Piezoelectric Ceramic Resonator, 4.5mm x 2mm x 1.15mm, https://www.murata.com/products/productdata/8801051639838/SPEC-CSTCR4M00G53-R0.pdf?1517839209000 +Crystal Oscillator +0 +9 +3 +Crystal +Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mm +SMD Resomator/Filter Murata CSTCE, https://www.murata.com/en-eu/products/productdata/8801162264606/SPEC-CSTNE16M0VH3C000R0.pdf +SMD SMT ceramic resonator filter +0 +3 +3 +Crystal +Resonator_SMD_Murata_CSTxExxV-3Pin_3.0x1.1mm_HandSoldering +SMD Resomator/Filter Murata CSTCE, https://www.murata.com/en-eu/products/productdata/8801162264606/SPEC-CSTNE16M0VH3C000R0.pdf +SMD SMT ceramic resonator filter +0 +3 +3 +Crystal +Resonator_SMD_Murata_SFECV-3Pin_6.9x2.9mm +SMD Resomator/Filter Murata SFECV, http://cdn-reichelt.de/documents/datenblatt/B400/SFECV-107.pdf, 6.9x2.9mm^2 package +SMD SMT ceramic resonator filter filter +0 +3 +3 +Crystal +Resonator_SMD_Murata_SFECV-3Pin_6.9x2.9mm_HandSoldering +SMD Resomator/Filter Murata SFECV, http://cdn-reichelt.de/documents/datenblatt/B400/SFECV-107.pdf, hand-soldering, 6.9x2.9mm^2 package +SMD SMT ceramic resonator filter filter hand-soldering +0 +3 +3 +Crystal +Resonator_SMD_Murata_SFSKA-3Pin_7.9x3.8mm +SMD Resomator/Filter Murata SFSKA, http://cdn-reichelt.de/documents/datenblatt/B400/SFECV-107.pdf, 7.9x3.8mm^2 package +SMD SMT ceramic resonator filter filter +0 +3 +3 +Crystal +Resonator_SMD_Murata_SFSKA-3Pin_7.9x3.8mm_HandSoldering +SMD Resomator/Filter Murata SFSKA, http://cdn-reichelt.de/documents/datenblatt/B400/SFECV-107.pdf, hand-soldering, 7.9x3.8mm^2 package +SMD SMT ceramic resonator filter filter hand-soldering +0 +3 +3 +Crystal +Resonator_SMD_Murata_TPSKA-3Pin_7.9x3.8mm +SMD Resomator/Filter Murata TPSKA, http://cdn-reichelt.de/documents/datenblatt/B400/SFECV-107.pdf, 7.9x3.8mm^2 package +SMD SMT ceramic resonator filter filter +0 +3 +3 +Crystal +Resonator_SMD_Murata_TPSKA-3Pin_7.9x3.8mm_HandSoldering +SMD Resomator/Filter Murata TPSKA, http://cdn-reichelt.de/documents/datenblatt/B400/SFECV-107.pdf, hand-soldering, 7.9x3.8mm^2 package +SMD SMT ceramic resonator filter filter hand-soldering +0 +3 +3 +Diode_SMD +D_0201_0603Metric +Diode SMD 0201 (0603 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://www.vishay.com/docs/20052/crcw0201e3.pdf), generated with kicad-footprint-generator +diode +0 +4 +2 +Diode_SMD +D_0201_0603Metric_Pad0.64x0.40mm_HandSolder +Diode SMD 0201 (0603 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://www.vishay.com/docs/20052/crcw0201e3.pdf), generated with kicad-footprint-generator +diode handsolder +0 +4 +2 +Diode_SMD +D_0402_1005Metric +Diode SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +diode +0 +2 +2 +Diode_SMD +D_0402_1005Metric_Pad0.77x0.64mm_HandSolder +Diode SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +diode handsolder +0 +2 +2 +Diode_SMD +D_0603_1608Metric +Diode SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +diode +0 +2 +2 +Diode_SMD +D_0603_1608Metric_Pad1.05x0.95mm_HandSolder +Diode SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +diode handsolder +0 +2 +2 +Diode_SMD +D_0805_2012Metric +Diode SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator +diode +0 +2 +2 +Diode_SMD +D_0805_2012Metric_Pad1.15x1.40mm_HandSolder +Diode SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator +diode handsolder +0 +2 +2 +Diode_SMD +D_01005_0402Metric +Diode SMD 01005 (0402 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.vishay.com/docs/20056/crcw01005e3.pdf), generated with kicad-footprint-generator +diode +0 +4 +2 +Diode_SMD +D_01005_0402Metric_Pad0.57x0.30mm_HandSolder +Diode SMD 01005 (0402 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.vishay.com/docs/20056/crcw01005e3.pdf), generated with kicad-footprint-generator +diode handsolder +0 +4 +2 +Diode_SMD +D_1206_3216Metric +Diode SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +diode +0 +2 +2 +Diode_SMD +D_1206_3216Metric_Pad1.42x1.75mm_HandSolder +Diode SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +diode handsolder +0 +2 +2 +Diode_SMD +D_1210_3225Metric +Diode SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +diode +0 +2 +2 +Diode_SMD +D_1210_3225Metric_Pad1.42x2.65mm_HandSolder +Diode SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +diode handsolder +0 +2 +2 +Diode_SMD +D_1812_4532Metric +Diode SMD 1812 (4532 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://www.nikhef.nl/pub/departments/mt/projects/detectorR_D/dtddice/ERJ2G.pdf), generated with kicad-footprint-generator +diode +0 +2 +2 +Diode_SMD +D_1812_4532Metric_Pad1.30x3.40mm_HandSolder +Diode SMD 1812 (4532 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://www.nikhef.nl/pub/departments/mt/projects/detectorR_D/dtddice/ERJ2G.pdf), generated with kicad-footprint-generator +diode handsolder +0 +2 +2 +Diode_SMD +D_2010_5025Metric +Diode SMD 2010 (5025 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +diode +0 +2 +2 +Diode_SMD +D_2010_5025Metric_Pad1.52x2.65mm_HandSolder +Diode SMD 2010 (5025 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +diode handsolder +0 +2 +2 +Diode_SMD +D_2114_3652Metric +Diode SMD 2114 (3652 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size from: http://datasheets.avx.com/schottky.pdf), generated with kicad-footprint-generator +diode +0 +2 +2 +Diode_SMD +D_2114_3652Metric_Pad1.85x3.75mm_HandSolder +Diode SMD 2114 (3652 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size from: http://datasheets.avx.com/schottky.pdf), generated with kicad-footprint-generator +diode handsolder +0 +2 +2 +Diode_SMD +D_2512_6332Metric +Diode SMD 2512 (6332 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +diode +0 +2 +2 +Diode_SMD +D_2512_6332Metric_Pad1.52x3.35mm_HandSolder +Diode SMD 2512 (6332 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +diode handsolder +0 +2 +2 +Diode_SMD +D_3220_8050Metric +Diode SMD 3220 (8050 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size from: http://datasheets.avx.com/schottky.pdf), generated with kicad-footprint-generator +diode +0 +2 +2 +Diode_SMD +D_3220_8050Metric_Pad2.65x5.15mm_HandSolder +Diode SMD 3220 (8050 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size from: http://datasheets.avx.com/schottky.pdf), generated with kicad-footprint-generator +diode handsolder +0 +2 +2 +Diode_SMD +D_MELF +Diode, MELF,, +Diode MELF +0 +2 +2 +Diode_SMD +D_MELF-RM10_Universal_Handsoldering +Diode, Universal, MELF, RM10, Handsoldering, SMD, Thruhole, +Diode Universal MELF RM10 Handsoldering SMD Thruhole +0 +2 +2 +Diode_SMD +D_MELF_Handsoldering +Diode MELF Handsoldering +Diode MELF Handsoldering +0 +2 +2 +Diode_SMD +D_MicroMELF +Diode, MicroMELF, Reflow Soldering, http://www.vishay.com/docs/85597/bzm55.pdf +MicroMELF Diode +0 +2 +2 +Diode_SMD +D_MicroMELF_Handsoldering +Diode, MicroMELF, Hand Soldering, http://www.vishay.com/docs/85597/bzm55.pdf +MicroMELF Diode +0 +2 +2 +Diode_SMD +D_MicroSMP_AK +Diode MicroSMP (DO-219AD), large-pad cathode, https://www.vishay.com/docs/89020/mss1p3l.pdf +Diode MicroSMP (DO-219AD) +0 +2 +2 +Diode_SMD +D_MicroSMP_KA +Diode MicroSMP (DO-219AD), large-pad anode, https://www.vishay.com/docs/89457/msmp6a.pdf +Diode MicroSMP (DO-219AD) +0 +2 +2 +Diode_SMD +D_MiniMELF +Diode Mini-MELF (SOD-80) +Diode Mini-MELF (SOD-80) +0 +2 +2 +Diode_SMD +D_MiniMELF_Handsoldering +Diode Mini-MELF (SOD-80) Handsoldering +Diode Mini-MELF (SOD-80) Handsoldering +0 +2 +2 +Diode_SMD +D_PowerDI-5 +PowerDI,Diode,Vishay,https://www.diodes.com/assets/Package-Files/PowerDI5.pdf +PowerDI diode vishay +0 +3 +2 +Diode_SMD +D_PowerDI-123 +http://www.diodes.com/_files/datasheets/ds30497.pdf +PowerDI diode vishay +0 +2 +2 +Diode_SMD +D_Powermite2_AK +Microsemi Powermite 2 SMD power package (https://www.microsemi.com/packaging-information/partpackage/details?pid=5341) +PowerMite2 +0 +2 +2 +Diode_SMD +D_Powermite2_KA +Microsemi Powermite 2 SMD power package (https://www.microsemi.com/packaging-information/partpackage/details?pid=5341) +PowerMite2 +0 +2 +2 +Diode_SMD +D_Powermite3 +Microsemi Powermite 3 SMD power package (https://www.microsemi.com/packaging-information/partpackage/details?pid=5340) +PowerMite3 +0 +3 +3 +Diode_SMD +D_Powermite_AK +Microsemi Powermite SMD power package (https://www.microsemi.com/packaging-information/partpackage/details?pid=5339, https://www.onsemi.com/pub/Collateral/457-04.PDF) +Powermite +0 +2 +2 +Diode_SMD +D_Powermite_KA +Microsemi Powermite SMD power package (https://www.microsemi.com/packaging-information/partpackage/details?pid=5339, https://www.onsemi.com/pub/Collateral/457-04.PDF) +Powermite +0 +2 +2 +Diode_SMD +D_QFN_3.3x3.3mm_P0.65mm +QFN, diode, 3.3x3.3x1mm (https://www.wolfspeed.com/media/downloads/846/C3D1P7060Q.pdf) +diode qfn 3.3 +0 +3 +2 +Diode_SMD +D_SC-80 +JEITA SC-80 +SC-80 +0 +2 +2 +Diode_SMD +D_SC-80_HandSoldering +JEITA SC-80 +SC-80 +0 +2 +2 +Diode_SMD +D_SMA +Diode SMA (DO-214AC) +Diode SMA (DO-214AC) +0 +2 +2 +Diode_SMD +D_SMA-SMB_Universal_Handsoldering +Diode, Universal, SMA (DO-214AC) or SMB (DO-214AA), Handsoldering, +Diode Universal SMA (DO-214AC) SMB (DO-214AA) Handsoldering +0 +2 +2 +Diode_SMD +D_SMA_Handsoldering +Diode SMA (DO-214AC) Handsoldering +Diode SMA (DO-214AC) Handsoldering +0 +2 +2 +Diode_SMD +D_SMB +Diode SMB (DO-214AA) +Diode SMB (DO-214AA) +0 +2 +2 +Diode_SMD +D_SMB-SMC_Universal_Handsoldering +Diode, Universal, SMB(DO-214AA) or SMC (DO-214AB), Handsoldering, +Diode Universal SMB(DO-214AA) SMC (DO-214AB) Handsoldering +0 +2 +2 +Diode_SMD +D_SMB_Handsoldering +Diode SMB (DO-214AA) Handsoldering +Diode SMB (DO-214AA) Handsoldering +0 +2 +2 +Diode_SMD +D_SMB_Modified +Diode SMB (DO-214AA) Modified (http://www.littelfuse.com/~/media/electronics/datasheets/sidactors/littelfuse_sidactor_battrax_positive_negative_modified_do_214_datasheet.pdf.pdf) +Diode SMB (DO-214AA) +0 +3 +3 +Diode_SMD +D_SMC +Diode SMC (DO-214AB) +Diode SMC (DO-214AB) +0 +2 +2 +Diode_SMD +D_SMC-RM10_Universal_Handsoldering +Diode, Universal, SMC (DO-214AB), RM10, Handsoldering, SMD, Thruhole +Diode Universal SMC (DO-214AB) RM10 Handsoldering SMD Thruhole +0 +2 +2 +Diode_SMD +D_SMC_Handsoldering +Diode SMC (DO-214AB) Handsoldering +Diode SMC (DO-214AB) Handsoldering +0 +2 +2 +Diode_SMD +D_SMF +Diode SMF (DO-219AB), http://www.vishay.com/docs/95572/smf_do-219ab.pdf +Diode SMF (DO-214AB) +0 +2 +2 +Diode_SMD +D_SOD-110 +SOD-110 +SOD-110 +0 +2 +2 +Diode_SMD +D_SOD-123 +SOD-123 +SOD-123 +0 +2 +2 +Diode_SMD +D_SOD-123F +D_SOD-123F +D_SOD-123F +0 +2 +2 +Diode_SMD +D_SOD-128 +D_SOD-128 (CFP5 SlimSMAW), https://assets.nexperia.com/documents/outline-drawing/SOD128.pdf +D_SOD-128 +0 +2 +2 +Diode_SMD +D_SOD-323 +SOD-323 +SOD-323 +0 +2 +2 +Diode_SMD +D_SOD-323F +SOD-323F http://www.nxp.com/documents/outline_drawing/SOD323F.pdf +SOD-323F +0 +2 +2 +Diode_SMD +D_SOD-323_HandSoldering +SOD-323 +SOD-323 +0 +2 +2 +Diode_SMD +D_SOD-523 +http://www.diodes.com/datasheets/ap02001.pdf p.144 +Diode SOD523 +0 +2 +2 +Diode_SMD +D_SOD-923 +https://www.onsemi.com/pub/Collateral/ESD9B-D.PDF#page=4 +Diode SOD923 +0 +2 +2 +Diode_SMD +D_TUMD2 +ROHM - TUMD2 +TUMD2 +0 +2 +2 +Diode_SMD +Diode_Bridge_Bourns_CD-DF4xxS +8.1x10.5mm, 4A, single phase bridge rectifier, https://www.bourns.com/docs/Product-Datasheets/CD-DF4xxSL.pdf +Surface Mount Bridge Rectifier Diode +0 +4 +4 +Diode_SMD +Diode_Bridge_Diotec_ABS +SMD diode bridge ABS (Diotec), see https://diotec.com/tl_files/diotec/files/pdf/datasheets/abs2.pdf +ABS MBLS +0 +4 +4 +Diode_SMD +Diode_Bridge_Diotec_MicroDil_3.0x3.0x1.8mm +SMD package Diotec Diotec MicroDil, body 3.0x3.0x1.8mm (e.g. diode bridge), see https://diotec.com/tl_files/diotec/files/pdf/datasheets/mys40.pdf +Diotec MicroDil diode bridge +0 +4 +4 +Diode_SMD +Diode_Bridge_Diotec_SO-DIL-Slim +SMD diode bridge Diotec SO-DIL Slim, see https://diotec.com/tl_files/diotec/files/pdf/datasheets/b40fs.pdf +DFS SO-DIL Slim +0 +4 +4 +Diode_SMD +Diode_Bridge_OnSemi_SDIP-4L +SMD diode bridge OnSemi SDIP-4L, see https://www.onsemi.com/pdf/datasheet/df10s1-d.pdf +OnSemi Diode Bridge SDIP-4L +0 +4 +4 +Diode_SMD +Diode_Bridge_Vishay_DFS +SMD diode bridge DFS, see http://www.vishay.com/docs/88854/padlayouts.pdf +DFS +0 +4 +4 +Diode_SMD +Diode_Bridge_Vishay_DFSFlat +SMD diode bridge Low Profile DFS "Flat", see http://www.vishay.com/docs/88874/dfl15005.pdf +DFS +0 +4 +4 +Diode_SMD +Diode_Bridge_Vishay_MBLS +SMD diode bridge MBLS, see http://www.vishay.com/docs/89959/mbl104s.pdf http://www.vishay.com/docs/88854/padlayouts.pdf +DFS +0 +4 +4 +Diode_SMD +Infineon_SG-WLL-2-3_0.58x0.28_P0.36mm +Infineon SG-WLL-2-3, 0.58x0.28x0.15mm, https://www.infineon.com/dgdl/Infineon-SG-WLL-2-3_SPO_PDF-Package-v02_00-EN.pdf?fileId=5546d46271bf4f9201723159ce71239d +Infineon WLL +0 +4 +2 +Diode_SMD +Littelfuse_PolyZen-LS +http://m.littelfuse.com/~/media/electronics/datasheets/polyzen_devices/littelfuse_polyzen_standard_polyzen_catalog_datasheet.pdf.pdf +Diode Polymer Protected Zener Diode Littelfuse LS +0 +3 +3 +Diode_SMD +Nexperia_CFP3_SOD-123W +Nexperia CFP3 (SOD-123W), https://assets.nexperia.com/documents/outline-drawing/SOD123W.pdf +CFP3 SOD-123W +0 +2 +2 +Diode_SMD +Nexperia_DSN0603-2_0.6x0.3mm_P0.4mm +SOD962-2 silicon, leadless ultra small package; 2 terminals; 0.4 mm pitch; 0.6 mm x 0.3 mm x 0.3 mm body (https://assets.nexperia.com/documents/package-information/SOD962-2.pdf https://www.nexperia.com/packages/SOD962-2.html) +TVS protection diodes +0 +2 +2 +Diode_SMD +Nexperia_DSN1608-2_1.6x0.8mm +Diode SMD DSN1608, 1.6 x 0.8 x 0.29 mm, https://assets.nexperia.com/documents/package-information/SOD964.pdf +diode SOD964 SOD-964 +0 +2 +2 +Diode_SMD +Vishay_SMPA +Diode SMPA (DO-221BC), https://www.vishay.com/docs/87659/v8pa10.pdf +Diode SMPA (DO-221BC) +0 +2 +2 +Diode_THT +D_5KPW_P7.62mm_Vertical_AnodeUp +Diode, 5KPW series, Axial, Vertical, pin pitch=7.62mm, , length*diameter=9*8mm^2, , http://www.diodes.com/_files/packages/8686949.gif +Diode 5KPW series Axial Vertical pin pitch 7.62mm length 9mm diameter 8mm +0 +2 +2 +Diode_THT +D_5KPW_P7.62mm_Vertical_KathodeUp +Diode, 5KPW series, Axial, Vertical, pin pitch=7.62mm, , length*diameter=9*8mm^2, , http://www.diodes.com/_files/packages/8686949.gif +Diode 5KPW series Axial Vertical pin pitch 7.62mm length 9mm diameter 8mm +0 +2 +2 +Diode_THT +D_5KPW_P12.70mm_Horizontal +Diode, 5KPW series, Axial, Horizontal, pin pitch=12.7mm, , length*diameter=9*8mm^2, , http://www.diodes.com/_files/packages/8686949.gif +Diode 5KPW series Axial Horizontal pin pitch 12.7mm length 9mm diameter 8mm +0 +2 +2 +Diode_THT +D_5KP_P7.62mm_Vertical_AnodeUp +Diode, 5KP series, Axial, Vertical, pin pitch=7.62mm, , length*diameter=7.62*9.53mm^2, , http://www.diodes.com/_files/packages/8686949.gif +Diode 5KP series Axial Vertical pin pitch 7.62mm length 7.62mm diameter 9.53mm +0 +2 +2 +Diode_THT +D_5KP_P7.62mm_Vertical_KathodeUp +Diode, 5KP series, Axial, Vertical, pin pitch=7.62mm, , length*diameter=7.62*9.53mm^2, , http://www.diodes.com/_files/packages/8686949.gif +Diode 5KP series Axial Vertical pin pitch 7.62mm length 7.62mm diameter 9.53mm +0 +2 +2 +Diode_THT +D_5KP_P10.16mm_Horizontal +Diode, 5KP series, Axial, Horizontal, pin pitch=10.16mm, , length*diameter=7.62*9.53mm^2, , http://www.diodes.com/_files/packages/8686949.gif +Diode 5KP series Axial Horizontal pin pitch 10.16mm length 7.62mm diameter 9.53mm +0 +2 +2 +Diode_THT +D_5KP_P12.70mm_Horizontal +Diode, 5KP series, Axial, Horizontal, pin pitch=12.7mm, , length*diameter=7.62*9.53mm^2, , http://www.diodes.com/_files/packages/8686949.gif +Diode 5KP series Axial Horizontal pin pitch 12.7mm length 7.62mm diameter 9.53mm +0 +2 +2 +Diode_THT +D_5W_P5.08mm_Vertical_AnodeUp +Diode, 5W series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=8.9*3.7mm^2, , http://www.diodes.com/_files/packages/8686949.gif +Diode 5W series Axial Vertical pin pitch 5.08mm length 8.9mm diameter 3.7mm +0 +2 +2 +Diode_THT +D_5W_P5.08mm_Vertical_KathodeUp +Diode, 5W series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=8.9*3.7mm^2, , http://www.diodes.com/_files/packages/8686949.gif +Diode 5W series Axial Vertical pin pitch 5.08mm length 8.9mm diameter 3.7mm +0 +2 +2 +Diode_THT +D_5W_P10.16mm_Horizontal +Diode, 5W series, Axial, Horizontal, pin pitch=10.16mm, , length*diameter=8.9*3.7mm^2, , http://www.diodes.com/_files/packages/8686949.gif +Diode 5W series Axial Horizontal pin pitch 10.16mm length 8.9mm diameter 3.7mm +0 +2 +2 +Diode_THT +D_5W_P12.70mm_Horizontal +Diode, 5W series, Axial, Horizontal, pin pitch=12.7mm, , length*diameter=8.9*3.7mm^2, , http://www.diodes.com/_files/packages/8686949.gif +Diode 5W series Axial Horizontal pin pitch 12.7mm length 8.9mm diameter 3.7mm +0 +2 +2 +Diode_THT +D_A-405_P2.54mm_Vertical_AnodeUp +Diode, A-405 series, Axial, Vertical, pin pitch=2.54mm, , length*diameter=5.2*2.7mm^2, , http://www.diodes.com/_files/packages/A-405.pdf +Diode A-405 series Axial Vertical pin pitch 2.54mm length 5.2mm diameter 2.7mm +0 +2 +2 +Diode_THT +D_A-405_P2.54mm_Vertical_KathodeUp +Diode, A-405 series, Axial, Vertical, pin pitch=2.54mm, , length*diameter=5.2*2.7mm^2, , http://www.diodes.com/_files/packages/A-405.pdf +Diode A-405 series Axial Vertical pin pitch 2.54mm length 5.2mm diameter 2.7mm +0 +2 +2 +Diode_THT +D_A-405_P5.08mm_Vertical_AnodeUp +Diode, A-405 series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=5.2*2.7mm^2, , http://www.diodes.com/_files/packages/A-405.pdf +Diode A-405 series Axial Vertical pin pitch 5.08mm length 5.2mm diameter 2.7mm +0 +2 +2 +Diode_THT +D_A-405_P5.08mm_Vertical_KathodeUp +Diode, A-405 series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=5.2*2.7mm^2, , http://www.diodes.com/_files/packages/A-405.pdf +Diode A-405 series Axial Vertical pin pitch 5.08mm length 5.2mm diameter 2.7mm +0 +2 +2 +Diode_THT +D_A-405_P7.62mm_Horizontal +Diode, A-405 series, Axial, Horizontal, pin pitch=7.62mm, , length*diameter=5.2*2.7mm^2, , http://www.diodes.com/_files/packages/A-405.pdf +Diode A-405 series Axial Horizontal pin pitch 7.62mm length 5.2mm diameter 2.7mm +0 +2 +2 +Diode_THT +D_A-405_P10.16mm_Horizontal +Diode, A-405 series, Axial, Horizontal, pin pitch=10.16mm, , length*diameter=5.2*2.7mm^2, , http://www.diodes.com/_files/packages/A-405.pdf +Diode A-405 series Axial Horizontal pin pitch 10.16mm length 5.2mm diameter 2.7mm +0 +2 +2 +Diode_THT +D_A-405_P12.70mm_Horizontal +Diode, A-405 series, Axial, Horizontal, pin pitch=12.7mm, , length*diameter=5.2*2.7mm^2, , http://www.diodes.com/_files/packages/A-405.pdf +Diode A-405 series Axial Horizontal pin pitch 12.7mm length 5.2mm diameter 2.7mm +0 +2 +2 +Diode_THT +D_DO-15_P2.54mm_Vertical_AnodeUp +Diode, DO-15 series, Axial, Vertical, pin pitch=2.54mm, , length*diameter=7.6*3.6mm^2, , http://www.diodes.com/_files/packages/DO-15.pdf +Diode DO-15 series Axial Vertical pin pitch 2.54mm length 7.6mm diameter 3.6mm +0 +2 +2 +Diode_THT +D_DO-15_P2.54mm_Vertical_KathodeUp +Diode, DO-15 series, Axial, Vertical, pin pitch=2.54mm, , length*diameter=7.6*3.6mm^2, , http://www.diodes.com/_files/packages/DO-15.pdf +Diode DO-15 series Axial Vertical pin pitch 2.54mm length 7.6mm diameter 3.6mm +0 +2 +2 +Diode_THT +D_DO-15_P3.81mm_Vertical_AnodeUp +Diode, DO-15 series, Axial, Vertical, pin pitch=3.81mm, , length*diameter=7.6*3.6mm^2, , http://www.diodes.com/_files/packages/DO-15.pdf +Diode DO-15 series Axial Vertical pin pitch 3.81mm length 7.6mm diameter 3.6mm +0 +2 +2 +Diode_THT +D_DO-15_P3.81mm_Vertical_KathodeUp +Diode, DO-15 series, Axial, Vertical, pin pitch=3.81mm, , length*diameter=7.6*3.6mm^2, , http://www.diodes.com/_files/packages/DO-15.pdf +Diode DO-15 series Axial Vertical pin pitch 3.81mm length 7.6mm diameter 3.6mm +0 +2 +2 +Diode_THT +D_DO-15_P5.08mm_Vertical_AnodeUp +Diode, DO-15 series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=7.6*3.6mm^2, , http://www.diodes.com/_files/packages/DO-15.pdf +Diode DO-15 series Axial Vertical pin pitch 5.08mm length 7.6mm diameter 3.6mm +0 +2 +2 +Diode_THT +D_DO-15_P5.08mm_Vertical_KathodeUp +Diode, DO-15 series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=7.6*3.6mm^2, , http://www.diodes.com/_files/packages/DO-15.pdf +Diode DO-15 series Axial Vertical pin pitch 5.08mm length 7.6mm diameter 3.6mm +0 +2 +2 +Diode_THT +D_DO-15_P10.16mm_Horizontal +Diode, DO-15 series, Axial, Horizontal, pin pitch=10.16mm, , length*diameter=7.6*3.6mm^2, , http://www.diodes.com/_files/packages/DO-15.pdf +Diode DO-15 series Axial Horizontal pin pitch 10.16mm length 7.6mm diameter 3.6mm +0 +2 +2 +Diode_THT +D_DO-15_P12.70mm_Horizontal +Diode, DO-15 series, Axial, Horizontal, pin pitch=12.7mm, , length*diameter=7.6*3.6mm^2, , http://www.diodes.com/_files/packages/DO-15.pdf +Diode DO-15 series Axial Horizontal pin pitch 12.7mm length 7.6mm diameter 3.6mm +0 +2 +2 +Diode_THT +D_DO-15_P15.24mm_Horizontal +Diode, DO-15 series, Axial, Horizontal, pin pitch=15.24mm, , length*diameter=7.6*3.6mm^2, , http://www.diodes.com/_files/packages/DO-15.pdf +Diode DO-15 series Axial Horizontal pin pitch 15.24mm length 7.6mm diameter 3.6mm +0 +2 +2 +Diode_THT +D_DO-27_P5.08mm_Vertical_AnodeUp +Diode, DO-27 series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=9.52*5.33mm^2, , http://www.slottechforum.com/slotinfo/Techstuff/CD2%20Diodes%20and%20Transistors/Cases/Diode%20DO-27.jpg +Diode DO-27 series Axial Vertical pin pitch 5.08mm length 9.52mm diameter 5.33mm +0 +2 +2 +Diode_THT +D_DO-27_P5.08mm_Vertical_KathodeUp +Diode, DO-27 series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=9.52*5.33mm^2, , http://www.slottechforum.com/slotinfo/Techstuff/CD2%20Diodes%20and%20Transistors/Cases/Diode%20DO-27.jpg +Diode DO-27 series Axial Vertical pin pitch 5.08mm length 9.52mm diameter 5.33mm +0 +2 +2 +Diode_THT +D_DO-27_P12.70mm_Horizontal +Diode, DO-27 series, Axial, Horizontal, pin pitch=12.7mm, , length*diameter=9.52*5.33mm^2, , http://www.slottechforum.com/slotinfo/Techstuff/CD2%20Diodes%20and%20Transistors/Cases/Diode%20DO-27.jpg +Diode DO-27 series Axial Horizontal pin pitch 12.7mm length 9.52mm diameter 5.33mm +0 +2 +2 +Diode_THT +D_DO-27_P15.24mm_Horizontal +Diode, DO-27 series, Axial, Horizontal, pin pitch=15.24mm, , length*diameter=9.52*5.33mm^2, , http://www.slottechforum.com/slotinfo/Techstuff/CD2%20Diodes%20and%20Transistors/Cases/Diode%20DO-27.jpg +Diode DO-27 series Axial Horizontal pin pitch 15.24mm length 9.52mm diameter 5.33mm +0 +2 +2 +Diode_THT +D_DO-34_SOD68_P2.54mm_Vertical_AnodeUp +Diode, DO-34_SOD68 series, Axial, Vertical, pin pitch=2.54mm, , length*diameter=3.04*1.6mm^2, , https://www.nxp.com/docs/en/data-sheet/KTY83_SER.pdf +Diode DO-34_SOD68 series Axial Vertical pin pitch 2.54mm length 3.04mm diameter 1.6mm +0 +2 +2 +Diode_THT +D_DO-34_SOD68_P2.54mm_Vertical_KathodeUp +Diode, DO-34_SOD68 series, Axial, Vertical, pin pitch=2.54mm, , length*diameter=3.04*1.6mm^2, , https://www.nxp.com/docs/en/data-sheet/KTY83_SER.pdf +Diode DO-34_SOD68 series Axial Vertical pin pitch 2.54mm length 3.04mm diameter 1.6mm +0 +2 +2 +Diode_THT +D_DO-34_SOD68_P5.08mm_Vertical_AnodeUp +Diode, DO-34_SOD68 series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=3.04*1.6mm^2, , https://www.nxp.com/docs/en/data-sheet/KTY83_SER.pdf +Diode DO-34_SOD68 series Axial Vertical pin pitch 5.08mm length 3.04mm diameter 1.6mm +0 +2 +2 +Diode_THT +D_DO-34_SOD68_P5.08mm_Vertical_KathodeUp +Diode, DO-34_SOD68 series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=3.04*1.6mm^2, , https://www.nxp.com/docs/en/data-sheet/KTY83_SER.pdf +Diode DO-34_SOD68 series Axial Vertical pin pitch 5.08mm length 3.04mm diameter 1.6mm +0 +2 +2 +Diode_THT +D_DO-34_SOD68_P7.62mm_Horizontal +Diode, DO-34_SOD68 series, Axial, Horizontal, pin pitch=7.62mm, , length*diameter=3.04*1.6mm^2, , https://www.nxp.com/docs/en/data-sheet/KTY83_SER.pdf +Diode DO-34_SOD68 series Axial Horizontal pin pitch 7.62mm length 3.04mm diameter 1.6mm +0 +2 +2 +Diode_THT +D_DO-34_SOD68_P10.16mm_Horizontal +Diode, DO-34_SOD68 series, Axial, Horizontal, pin pitch=10.16mm, , length*diameter=3.04*1.6mm^2, , https://www.nxp.com/docs/en/data-sheet/KTY83_SER.pdf +Diode DO-34_SOD68 series Axial Horizontal pin pitch 10.16mm length 3.04mm diameter 1.6mm +0 +2 +2 +Diode_THT +D_DO-34_SOD68_P12.70mm_Horizontal +Diode, DO-34_SOD68 series, Axial, Horizontal, pin pitch=12.7mm, , length*diameter=3.04*1.6mm^2, , https://www.nxp.com/docs/en/data-sheet/KTY83_SER.pdf +Diode DO-34_SOD68 series Axial Horizontal pin pitch 12.7mm length 3.04mm diameter 1.6mm +0 +2 +2 +Diode_THT +D_DO-35_SOD27_P2.54mm_Vertical_AnodeUp +Diode, DO-35_SOD27 series, Axial, Vertical, pin pitch=2.54mm, , length*diameter=4*2mm^2, , http://www.diodes.com/_files/packages/DO-35.pdf +Diode DO-35_SOD27 series Axial Vertical pin pitch 2.54mm length 4mm diameter 2mm +0 +2 +2 +Diode_THT +D_DO-35_SOD27_P2.54mm_Vertical_KathodeUp +Diode, DO-35_SOD27 series, Axial, Vertical, pin pitch=2.54mm, , length*diameter=4*2mm^2, , http://www.diodes.com/_files/packages/DO-35.pdf +Diode DO-35_SOD27 series Axial Vertical pin pitch 2.54mm length 4mm diameter 2mm +0 +2 +2 +Diode_THT +D_DO-35_SOD27_P3.81mm_Vertical_AnodeUp +Diode, DO-35_SOD27 series, Axial, Vertical, pin pitch=3.81mm, , length*diameter=4*2mm^2, , http://www.diodes.com/_files/packages/DO-35.pdf +Diode DO-35_SOD27 series Axial Vertical pin pitch 3.81mm length 4mm diameter 2mm +0 +2 +2 +Diode_THT +D_DO-35_SOD27_P3.81mm_Vertical_KathodeUp +Diode, DO-35_SOD27 series, Axial, Vertical, pin pitch=3.81mm, , length*diameter=4*2mm^2, , http://www.diodes.com/_files/packages/DO-35.pdf +Diode DO-35_SOD27 series Axial Vertical pin pitch 3.81mm length 4mm diameter 2mm +0 +2 +2 +Diode_THT +D_DO-35_SOD27_P5.08mm_Vertical_AnodeUp +Diode, DO-35_SOD27 series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=4*2mm^2, , http://www.diodes.com/_files/packages/DO-35.pdf +Diode DO-35_SOD27 series Axial Vertical pin pitch 5.08mm length 4mm diameter 2mm +0 +2 +2 +Diode_THT +D_DO-35_SOD27_P5.08mm_Vertical_KathodeUp +Diode, DO-35_SOD27 series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=4*2mm^2, , http://www.diodes.com/_files/packages/DO-35.pdf +Diode DO-35_SOD27 series Axial Vertical pin pitch 5.08mm length 4mm diameter 2mm +0 +2 +2 +Diode_THT +D_DO-35_SOD27_P7.62mm_Horizontal +Diode, DO-35_SOD27 series, Axial, Horizontal, pin pitch=7.62mm, , length*diameter=4*2mm^2, , http://www.diodes.com/_files/packages/DO-35.pdf +Diode DO-35_SOD27 series Axial Horizontal pin pitch 7.62mm length 4mm diameter 2mm +0 +2 +2 +Diode_THT +D_DO-35_SOD27_P10.16mm_Horizontal +Diode, DO-35_SOD27 series, Axial, Horizontal, pin pitch=10.16mm, , length*diameter=4*2mm^2, , http://www.diodes.com/_files/packages/DO-35.pdf +Diode DO-35_SOD27 series Axial Horizontal pin pitch 10.16mm length 4mm diameter 2mm +0 +2 +2 +Diode_THT +D_DO-35_SOD27_P12.70mm_Horizontal +Diode, DO-35_SOD27 series, Axial, Horizontal, pin pitch=12.7mm, , length*diameter=4*2mm^2, , http://www.diodes.com/_files/packages/DO-35.pdf +Diode DO-35_SOD27 series Axial Horizontal pin pitch 12.7mm length 4mm diameter 2mm +0 +2 +2 +Diode_THT +D_DO-41_SOD81_P2.54mm_Vertical_AnodeUp +Diode, DO-41_SOD81 series, Axial, Vertical, pin pitch=2.54mm, , length*diameter=5.2*2.7mm^2, , http://www.diodes.com/_files/packages/DO-41%20(Plastic).pdf +Diode DO-41_SOD81 series Axial Vertical pin pitch 2.54mm length 5.2mm diameter 2.7mm +0 +2 +2 +Diode_THT +D_DO-41_SOD81_P2.54mm_Vertical_KathodeUp +Diode, DO-41_SOD81 series, Axial, Vertical, pin pitch=2.54mm, , length*diameter=5.2*2.7mm^2, , http://www.diodes.com/_files/packages/DO-41%20(Plastic).pdf +Diode DO-41_SOD81 series Axial Vertical pin pitch 2.54mm length 5.2mm diameter 2.7mm +0 +2 +2 +Diode_THT +D_DO-41_SOD81_P3.81mm_Vertical_AnodeUp +Diode, DO-41_SOD81 series, Axial, Vertical, pin pitch=3.81mm, , length*diameter=5.2*2.7mm^2, , https://www.diodes.com/assets/Package-Files/DO-41-Plastic.pdf +Diode DO-41_SOD81 series Axial Vertical pin pitch 3.81mm length 5.2mm diameter 2.7mm +0 +2 +2 +Diode_THT +D_DO-41_SOD81_P3.81mm_Vertical_KathodeUp +Diode, DO-41_SOD81 series, Axial, Vertical, pin pitch=3.81mm, , length*diameter=5.2*2.7mm^2, , https://www.diodes.com/assets/Package-Files/DO-41-Plastic.pdf +Diode DO-41_SOD81 series Axial Vertical pin pitch 3.81mm length 5.2mm diameter 2.7mm +0 +2 +2 +Diode_THT +D_DO-41_SOD81_P5.08mm_Vertical_AnodeUp +Diode, DO-41_SOD81 series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=5.2*2.7mm^2, , http://www.diodes.com/_files/packages/DO-41%20(Plastic).pdf +Diode DO-41_SOD81 series Axial Vertical pin pitch 5.08mm length 5.2mm diameter 2.7mm +0 +2 +2 +Diode_THT +D_DO-41_SOD81_P5.08mm_Vertical_KathodeUp +Diode, DO-41_SOD81 series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=5.2*2.7mm^2, , http://www.diodes.com/_files/packages/DO-41%20(Plastic).pdf +Diode DO-41_SOD81 series Axial Vertical pin pitch 5.08mm length 5.2mm diameter 2.7mm +0 +2 +2 +Diode_THT +D_DO-41_SOD81_P7.62mm_Horizontal +Diode, DO-41_SOD81 series, Axial, Horizontal, pin pitch=7.62mm, , length*diameter=5.2*2.7mm^2, , http://www.diodes.com/_files/packages/DO-41%20(Plastic).pdf +Diode DO-41_SOD81 series Axial Horizontal pin pitch 7.62mm length 5.2mm diameter 2.7mm +0 +2 +2 +Diode_THT +D_DO-41_SOD81_P10.16mm_Horizontal +Diode, DO-41_SOD81 series, Axial, Horizontal, pin pitch=10.16mm, , length*diameter=5.2*2.7mm^2, , http://www.diodes.com/_files/packages/DO-41%20(Plastic).pdf +Diode DO-41_SOD81 series Axial Horizontal pin pitch 10.16mm length 5.2mm diameter 2.7mm +0 +2 +2 +Diode_THT +D_DO-41_SOD81_P12.70mm_Horizontal +Diode, DO-41_SOD81 series, Axial, Horizontal, pin pitch=12.7mm, , length*diameter=5.2*2.7mm^2, , http://www.diodes.com/_files/packages/DO-41%20(Plastic).pdf +Diode DO-41_SOD81 series Axial Horizontal pin pitch 12.7mm length 5.2mm diameter 2.7mm +0 +2 +2 +Diode_THT +D_DO-201AD_P3.81mm_Vertical_AnodeUp +Diode, DO-201AD series, Axial, Vertical, pin pitch=3.81mm, , length*diameter=9.5*5.2mm^2, , http://www.diodes.com/_files/packages/DO-201AD.pdf +Diode DO-201AD series Axial Vertical pin pitch 3.81mm length 9.5mm diameter 5.2mm +0 +2 +2 +Diode_THT +D_DO-201AD_P3.81mm_Vertical_KathodeUp +Diode, DO-201AD series, Axial, Vertical, pin pitch=3.81mm, , length*diameter=9.5*5.2mm^2, , http://www.diodes.com/_files/packages/DO-201AD.pdf +Diode DO-201AD series Axial Vertical pin pitch 3.81mm length 9.5mm diameter 5.2mm +0 +2 +2 +Diode_THT +D_DO-201AD_P5.08mm_Vertical_AnodeUp +Diode, DO-201AD series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=9.5*5.2mm^2, , http://www.diodes.com/_files/packages/DO-201AD.pdf +Diode DO-201AD series Axial Vertical pin pitch 5.08mm length 9.5mm diameter 5.2mm +0 +2 +2 +Diode_THT +D_DO-201AD_P5.08mm_Vertical_KathodeUp +Diode, DO-201AD series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=9.5*5.2mm^2, , http://www.diodes.com/_files/packages/DO-201AD.pdf +Diode DO-201AD series Axial Vertical pin pitch 5.08mm length 9.5mm diameter 5.2mm +0 +2 +2 +Diode_THT +D_DO-201AD_P12.70mm_Horizontal +Diode, DO-201AD series, Axial, Horizontal, pin pitch=12.7mm, , length*diameter=9.5*5.2mm^2, , http://www.diodes.com/_files/packages/DO-201AD.pdf +Diode DO-201AD series Axial Horizontal pin pitch 12.7mm length 9.5mm diameter 5.2mm +0 +2 +2 +Diode_THT +D_DO-201AD_P15.24mm_Horizontal +Diode, DO-201AD series, Axial, Horizontal, pin pitch=15.24mm, , length*diameter=9.5*5.2mm^2, , http://www.diodes.com/_files/packages/DO-201AD.pdf +Diode DO-201AD series Axial Horizontal pin pitch 15.24mm length 9.5mm diameter 5.2mm +0 +2 +2 +Diode_THT +D_DO-201AE_P3.81mm_Vertical_AnodeUp +Diode, DO-201AE series, Axial, Vertical, pin pitch=3.81mm, , length*diameter=9*5.3mm^2, , http://www.farnell.com/datasheets/529758.pdf +Diode DO-201AE series Axial Vertical pin pitch 3.81mm length 9mm diameter 5.3mm +0 +2 +2 +Diode_THT +D_DO-201AE_P3.81mm_Vertical_KathodeUp +Diode, DO-201AE series, Axial, Vertical, pin pitch=3.81mm, , length*diameter=9*5.3mm^2, , http://www.farnell.com/datasheets/529758.pdf +Diode DO-201AE series Axial Vertical pin pitch 3.81mm length 9mm diameter 5.3mm +0 +2 +2 +Diode_THT +D_DO-201AE_P5.08mm_Vertical_AnodeUp +Diode, DO-201AE series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=9*5.3mm^2, , http://www.farnell.com/datasheets/529758.pdf +Diode DO-201AE series Axial Vertical pin pitch 5.08mm length 9mm diameter 5.3mm +0 +2 +2 +Diode_THT +D_DO-201AE_P5.08mm_Vertical_KathodeUp +Diode, DO-201AE series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=9*5.3mm^2, , http://www.farnell.com/datasheets/529758.pdf +Diode DO-201AE series Axial Vertical pin pitch 5.08mm length 9mm diameter 5.3mm +0 +2 +2 +Diode_THT +D_DO-201AE_P12.70mm_Horizontal +Diode, DO-201AE series, Axial, Horizontal, pin pitch=12.7mm, , length*diameter=9*5.3mm^2, , http://www.farnell.com/datasheets/529758.pdf +Diode DO-201AE series Axial Horizontal pin pitch 12.7mm length 9mm diameter 5.3mm +0 +2 +2 +Diode_THT +D_DO-201AE_P15.24mm_Horizontal +Diode, DO-201AE series, Axial, Horizontal, pin pitch=15.24mm, , length*diameter=9*5.3mm^2, , http://www.farnell.com/datasheets/529758.pdf +Diode DO-201AE series Axial Horizontal pin pitch 15.24mm length 9mm diameter 5.3mm +0 +2 +2 +Diode_THT +D_DO-201_P3.81mm_Vertical_AnodeUp +Diode, DO-201 series, Axial, Vertical, pin pitch=3.81mm, , length*diameter=9.53*5.21mm^2, , http://www.diodes.com/_files/packages/DO-201.pdf +Diode DO-201 series Axial Vertical pin pitch 3.81mm length 9.53mm diameter 5.21mm +0 +2 +2 +Diode_THT +D_DO-201_P3.81mm_Vertical_KathodeUp +Diode, DO-201 series, Axial, Vertical, pin pitch=3.81mm, , length*diameter=9.53*5.21mm^2, , http://www.diodes.com/_files/packages/DO-201.pdf +Diode DO-201 series Axial Vertical pin pitch 3.81mm length 9.53mm diameter 5.21mm +0 +2 +2 +Diode_THT +D_DO-201_P5.08mm_Vertical_AnodeUp +Diode, DO-201 series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=9.53*5.21mm^2, , http://www.diodes.com/_files/packages/DO-201.pdf +Diode DO-201 series Axial Vertical pin pitch 5.08mm length 9.53mm diameter 5.21mm +0 +2 +2 +Diode_THT +D_DO-201_P5.08mm_Vertical_KathodeUp +Diode, DO-201 series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=9.53*5.21mm^2, , http://www.diodes.com/_files/packages/DO-201.pdf +Diode DO-201 series Axial Vertical pin pitch 5.08mm length 9.53mm diameter 5.21mm +0 +2 +2 +Diode_THT +D_DO-201_P12.70mm_Horizontal +Diode, DO-201 series, Axial, Horizontal, pin pitch=12.7mm, , length*diameter=9.53*5.21mm^2, , http://www.diodes.com/_files/packages/DO-201.pdf +Diode DO-201 series Axial Horizontal pin pitch 12.7mm length 9.53mm diameter 5.21mm +0 +2 +2 +Diode_THT +D_DO-201_P15.24mm_Horizontal +Diode, DO-201 series, Axial, Horizontal, pin pitch=15.24mm, , length*diameter=9.53*5.21mm^2, , http://www.diodes.com/_files/packages/DO-201.pdf +Diode DO-201 series Axial Horizontal pin pitch 15.24mm length 9.53mm diameter 5.21mm +0 +2 +2 +Diode_THT +D_DO-247_Horizontal_TabDown +Diode, DO-247 series, Horizontal, TabDown, P 10.9mm +diode rectifier +0 +2 +2 +Diode_THT +D_DO-247_Horizontal_TabUp +Diode, DO-247 series, Horizontal, TabUp, P 10.9mm +diode rectifier +0 +2 +2 +Diode_THT +D_DO-247_Vertical +Diode, DO-247 series, Vertical, P 10.9mm +diode rectifier +0 +2 +2 +Diode_THT +D_P600_R-6_P7.62mm_Vertical_AnodeUp +Diode, P600_R-6 series, Axial, Vertical, pin pitch=7.62mm, , length*diameter=9.1*9.1mm^2, , http://www.vishay.com/docs/88692/p600a.pdf, http://www.diodes.com/_files/packages/R-6.pdf +Diode P600_R-6 series Axial Vertical pin pitch 7.62mm length 9.1mm diameter 9.1mm +0 +2 +2 +Diode_THT +D_P600_R-6_P7.62mm_Vertical_KathodeUp +Diode, P600_R-6 series, Axial, Vertical, pin pitch=7.62mm, , length*diameter=9.1*9.1mm^2, , http://www.vishay.com/docs/88692/p600a.pdf, http://www.diodes.com/_files/packages/R-6.pdf +Diode P600_R-6 series Axial Vertical pin pitch 7.62mm length 9.1mm diameter 9.1mm +0 +2 +2 +Diode_THT +D_P600_R-6_P12.70mm_Horizontal +Diode, P600_R-6 series, Axial, Horizontal, pin pitch=12.7mm, , length*diameter=9.1*9.1mm^2, , http://www.vishay.com/docs/88692/p600a.pdf, http://www.diodes.com/_files/packages/R-6.pdf +Diode P600_R-6 series Axial Horizontal pin pitch 12.7mm length 9.1mm diameter 9.1mm +0 +2 +2 +Diode_THT +D_P600_R-6_P20.00mm_Horizontal +Diode, P600_R-6 series, Axial, Horizontal, pin pitch=20mm, , length*diameter=9.1*9.1mm^2, , http://www.vishay.com/docs/88692/p600a.pdf, http://www.diodes.com/_files/packages/R-6.pdf +Diode P600_R-6 series Axial Horizontal pin pitch 20mm length 9.1mm diameter 9.1mm +0 +2 +2 +Diode_THT +D_T-1_P2.54mm_Vertical_AnodeUp +Diode, T-1 series, Axial, Vertical, pin pitch=2.54mm, , length*diameter=3.2*2.6mm^2, , http://www.diodes.com/_files/packages/T-1.pdf +Diode T-1 series Axial Vertical pin pitch 2.54mm length 3.2mm diameter 2.6mm +0 +2 +2 +Diode_THT +D_T-1_P2.54mm_Vertical_KathodeUp +Diode, T-1 series, Axial, Vertical, pin pitch=2.54mm, , length*diameter=3.2*2.6mm^2, , http://www.diodes.com/_files/packages/T-1.pdf +Diode T-1 series Axial Vertical pin pitch 2.54mm length 3.2mm diameter 2.6mm +0 +2 +2 +Diode_THT +D_T-1_P5.08mm_Horizontal +Diode, T-1 series, Axial, Horizontal, pin pitch=5.08mm, , length*diameter=3.2*2.6mm^2, , http://www.diodes.com/_files/packages/T-1.pdf +Diode T-1 series Axial Horizontal pin pitch 5.08mm length 3.2mm diameter 2.6mm +0 +2 +2 +Diode_THT +D_T-1_P10.16mm_Horizontal +Diode, T-1 series, Axial, Horizontal, pin pitch=10.16mm, , length*diameter=3.2*2.6mm^2, , http://www.diodes.com/_files/packages/T-1.pdf +Diode T-1 series Axial Horizontal pin pitch 10.16mm length 3.2mm diameter 2.6mm +0 +2 +2 +Diode_THT +D_T-1_P12.70mm_Horizontal +Diode, T-1 series, Axial, Horizontal, pin pitch=12.7mm, , length*diameter=3.2*2.6mm^2, , http://www.diodes.com/_files/packages/T-1.pdf +Diode T-1 series Axial Horizontal pin pitch 12.7mm length 3.2mm diameter 2.6mm +0 +2 +2 +Diode_THT +Diode_Bridge_15.1x15.1x6.3mm_P10.9mm +Single phase bridge rectifier case 15.1x15.1mm, pitch 10.9mm, see https://diotec.com/tl_files/diotec/files/pdf/datasheets/pb1000.pdf +Diode Bridge PB10xxS +0 +4 +4 +Diode_THT +Diode_Bridge_15.2x15.2x6.3mm_P10.9mm +Single phase bridge rectifier case 15.2x15.2mm, pitch 10.9mm, see https://diotec.com/tl_files/diotec/files/pdf/datasheets/kbpc600.pdf +Diode Bridge KBPC6xx +0 +4 +4 +Diode_THT +Diode_Bridge_15.7x15.7x6.3mm_P10.8mm +Single phase bridge rectifier case 15.7x15.7 +Diode Bridge +0 +4 +4 +Diode_THT +Diode_Bridge_16.7x16.7x6.3mm_P10.8mm +Single phase bridge rectifier case 16.7x16.7 +Diode Bridge +0 +4 +4 +Diode_THT +Diode_Bridge_19.0x3.5x10.0mm_P5.0mm +Vishay GBU rectifier package, 5.08mm pitch, see http://www.vishay.com/docs/88606/g3sba20.pdf +Vishay GBU rectifier diode bridge +0 +4 +4 +Diode_THT +Diode_Bridge_19.0x19.0x6.8mm_P12.7mm +Single phase bridge rectifier case 19x19mm, pitch 12.7mm, see https://diotec.com/tl_files/diotec/files/pdf/datasheets/pb1000.pdf +Diode Bridge PB10xx +0 +4 +4 +Diode_THT +Diode_Bridge_28.6x28.6x7.3mm_P18.0mm_P11.6mm +Single phase bridge rectifier case 28.6x28.6mm, pitch 18.0mm & 11.6mm, see https://diotec.com/tl_files/diotec/files/pdf/datasheets/kbpc1500fw.pdf +Diode Bridge KBPCxxxxWP +0 +4 +4 +Diode_THT +Diode_Bridge_32.0x5.6x17.0mm_P10.0mm_P7.5mm +Diotec 32x5.6x17mm rectifier package, 7.5mm/10mm pitch, see https://diotec.com/tl_files/diotec/files/pdf/datasheets/b40c3700.pdf +Diotec rectifier diode bridge +0 +4 +4 +Diode_THT +Diode_Bridge_Comchip_SCVB-L +Three phase, Bridge, Rectifier, https://www.comchiptech.com/admin/files/product/SC35VB80S-G%20Thru506369.%20SC35VB160S-G%20RevB.pdf +diode module +0 +5 +5 +Diode_THT +Diode_Bridge_DIGITRON_KBPC_T +Single phase, Bridge rectifier, 28.614x28.614mm, case KBPC_T(FP), https://www.digitroncorp.com/Digitron/media/Files/Datasheets/KBPC15005-SERIES.pdf +diode module +0 +4 +4 +Diode_THT +Diode_Bridge_DIP-4_W5.08mm_P2.54mm +4-lead dip package for diode bridges, row spacing 5.08mm, pin-spacing 2.54mm, see http://www.vishay.com/docs/88898/b2m.pdf +DIL DIP PDIP 5.08mm 2.54 +0 +4 +4 +Diode_THT +Diode_Bridge_DIP-4_W7.62mm_P5.08mm +4-lead dip package for diode bridges, row spacing 7.62 mm (300 mils), see http://cdn-reichelt.de/documents/datenblatt/A400/HDBL101G_20SERIES-TSC.pdf +DIL DIP PDIP 5.08mm 7.62mm 300mil +0 +4 +4 +Diode_THT +Diode_Bridge_GeneSiC_KBPC_T +Single phase, Bridge rectifier, 28.55x28.55mm, case KBPC_T(FP), https://www.diodemodule.com/bridge-rectifier/kbpc/kbpc1501t.pdf +diode module +0 +4 +4 +Diode_THT +Diode_Bridge_GeneSiC_KBPC_W +Single phase, Bridge Rectifier, 28.55x28.55mm, case KBPC_W(WP), https://www.diodemodule.com/bridge-rectifier/kbpc/kbpc15005w.pdf +diode module +0 +4 +4 +Diode_THT +Diode_Bridge_IXYS_GUFP +Three phase, Bridge, Rectifier +diode module +0 +5 +5 +Diode_THT +Diode_Bridge_Round_D8.9mm +4-lead round diode bridge package, diameter 8.9mm, pin pitch 5.08mm, see http://cdn-reichelt.de/documents/datenblatt/A400/W005M-W10M_SEP.PDF +diode bridge 8.9mm 8.85mm WOB pitch 5.08mm +0 +4 +4 +Diode_THT +Diode_Bridge_Round_D9.0mm +4-lead round diode bridge package, diameter 9.0mm, pin pitch 5.0mm, see https://diotec.com/tl_files/diotec/files/pdf/datasheets/b40r.pdf +diode bridge 9.0mm 8.85mm WOB pitch 5.0mm +0 +4 +4 +Diode_THT +Diode_Bridge_Round_D9.8mm +4-lead round diode bridge package, diameter 9.8mm, pin pitch 5.08mm, see http://www.vishay.com/docs/88769/woo5g.pdf +diode bridge 9.8mm WOG pitch 5.08mm +0 +4 +4 +Diode_THT +Diode_Bridge_Vishay_GBL +Vishay GBL rectifier package, 5.08mm pitch, see http://www.vishay.com/docs/88609/gbl005.pdf +Vishay GBL rectifier diode bridge +0 +4 +4 +Diode_THT +Diode_Bridge_Vishay_GBU +Vishay GBU rectifier package, 5.08mm pitch, see http://www.vishay.com/docs/88606/g3sba20.pdf +Vishay GBU rectifier diode bridge +0 +4 +4 +Diode_THT +Diode_Bridge_Vishay_KBL +Vishay KBL rectifier package, 5.08mm pitch, see http://www.vishay.com/docs/88655/kbl005.pdf +Vishay KBL rectifier diode bridge +0 +4 +4 +Diode_THT +Diode_Bridge_Vishay_KBPC1 +Single phase bridge rectifier case KBPC1, see http://www.vishay.com/docs/93585/vs-kbpc1series.pdf +Diode Bridge +0 +4 +4 +Diode_THT +Diode_Bridge_Vishay_KBPC6 +Single phase bridge rectifier case KBPC6, see http://www.vishay.com/docs/93585/vs-kbpc1series.pdf +Diode Bridge +0 +4 +4 +Diode_THT +Diode_Bridge_Vishay_KBPM +Vishay KBM rectifier package, 3.95mm pitch (http://www.farnell.com/datasheets/2238158.pdf, http://www.cdil.com/s/kbp2005_.pdf) +Vishay KBM rectifier diode bridge +0 +4 +4 +Diode_THT +Diode_Bridge_Vishay_KBU +Vishay KBU rectifier package, 5.08mm pitch, see http://www.vishay.com/docs/88656/kbu4.pdf +Vishay KBU rectifier diode bridge +0 +4 +4 +Display +AG12864E +STN/FSTN LCD 128x64 dot https://www.digchip.com/datasheets/parts/datasheet/1121/AG-12864E-pdf.php +AG12864E Graphics Display 128x64 Ampire +0 +24 +20 +Display +Adafruit_SSD1306 +Adafruit SSD1306 OLED 1.3 inch 128x64 I2C & SPI https://learn.adafruit.com/monochrome-oled-breakouts/downloads +Adafruit SSD1306 OLED 1.3 inch 128x64 I2C & SPI +0 +8 +8 +Display +Adafruit_SSD1306_No_Mounting_Holes +Adafruit SSD1306 OLED 1.3 inch 128x64 I2C & SPI https://learn.adafruit.com/monochrome-oled-breakouts/downloads +Adafruit SSD1306 OLED 1.3 inch 128x64 I2C & SPI +0 +8 +8 +Display +CR2013-MI2120 +CR2013-MI2120 ILI9341 LCD Breakout http://pan.baidu.com/s/11Y990 +CR2013-MI2120 ILI9341 LCD Breakout +0 +18 +14 +Display +EA-eDIP128B-XXX +LCD-graphical display with LED backlight 128x64 RS-232 I2C or SPI http://www.lcd-module.com/fileadmin/eng/pdf/grafik/edip128-6e.pdf +LCD-graphical display with LED backlight 128x64 RS-232 I2C or SPI +0 +32 +32 +Display +EA_DOGL128-6 +Graphical,Display,LCD,128x64 https://www.lcd-module.com/eng/pdf/grafik/dogl128-6e.pdf +EA DOGL128 +0 +26 +26 +Display +EA_DOGM128-6 +Graphical,Display,LCD,128x64 https://www.lcd-module.de/eng/pdf/grafik/dogm128e.pdf +EA DOGM128-6 +0 +26 +26 +Display +EA_DOGS104X-A +LCD 4x10 character 3.3V VDD I2C or SPI http://www.lcd-module.com/fileadmin/eng/pdf/doma/dogs104e.pdf +LCD 4x10 character 3.3V VDD I2C or SPI +0 +14 +14 +Display +EA_DOGXL160-7 +Grapchical,Display,LCD,160x104 http://www.lcd-module.com/eng/pdf/grafik/dogxl160-7e.pdf +EA_DOGXL160-7 +0 +22 +22 +Display +EA_DOGXL160-7_Backlight +Grapchical,Display,LCD,160x104 http://www.lcd-module.com/eng/pdf/grafik/dogxl160-7e.pdf +EA_DOGXL160-7_Backlight +0 +22 +22 +Display +EA_T123X-I2C +http://www.lcd-module.de/pdf/doma/t123-i2c.pdf +3 Line 12 character wide alpha numeric LCD +0 +6 +6 +Display +EA_eDIP160-XXX +LCD-graphical display with LED backlight 160x104 RS-232 I2C or SPI http://www.lcd-module.com/fileadmin/eng/pdf/grafik/edip160-7e.pdf +LCD-graphical display with LED backlight 160x104 RS-232 I2C or SPI +0 +40 +40 +Display +EA_eDIP240-XXX +LCD graphical display LED backlight 240x128 http://www.lcd-module.com/fileadmin/eng/pdf/grafik/edip240-7e.pdf +LCD graphical display LED backlight 240x128 +0 +40 +40 +Display +EA_eDIP320X-XXX +LCD display 320x340 RS-232 I2C or SPI http://www.lcd-module.com/fileadmin/eng/pdf/grafik/edip320-8e.pdf +LCD display 320x340 RS-232 I2C or SPI +0 +48 +48 +Display +EA_eDIPTFT32-XXX +TFT-graphic display 320x240 16 bit colour with led backlight http://www.lcd-module.com/fileadmin/eng/pdf/grafik/ediptft32-ae.pdf +TFT-graphic display 320x240 16 bit colour with led backlight +0 +40 +40 +Display +EA_eDIPTFT43-ATC +http://www.lcd-module.com/fileadmin/eng/pdf/grafik/ediptft43-ae.pdf +TFT graphical display 480x272 16-bit colour with LED backlight +0 +40 +40 +Display +EA_eDIPTFT43-XXX +TFT graphical display 480x272 16-bit colour with LED backlight http://www.lcd-module.com/fileadmin/eng/pdf/grafik/ediptft43-ae.pdf +TFT graphical display 480x272 16-bit colour with LED backlight +0 +40 +40 +Display +EA_eDIPTFT57-XXX +http://www.lcd-module.com/fileadmin/eng/pdf/grafik/ediptft57-ae.pdf +TFT-graphic display 640x480 16 bit colour +0 +48 +48 +Display +EA_eDIPTFT70-ATC +TFT-graphical display 800x480 16-bit colours with capacitive touch panel http://www.lcd-module.com/fileadmin/eng/pdf/grafik/ediptft70-ae.pdf +TFT-graphical display 800x480 16-bit colours with capacitive touch panel +0 +48 +48 +Display +EA_eDIPTFT70-XXX +TFT-graphical display 800x480 16-bit colours http://www.lcd-module.com/fileadmin/eng/pdf/grafik/ediptft70-ae.pdf +TFT-graphical display 800x480 16-bit colours and touch display +0 +48 +48 +Display +ERM19264 +STN/FSTN LCD 192x64 dot https://www.buydisplay.com/download/manual/ERM19264-1_Series_Datasheet.pdf +ERM19264 Graphics Display 192x64 +0 +20 +20 +Display +HDSM-441B_HDSM-443B +2 Digit 7 segemnt blue LED, right hand decimal, https://docs.broadcom.com/docs/AV02-1589EN +2 Digit 7 segment blue LED +0 +10 +10 +Display +HDSM-541B_HDSM-543B +2 digit 7 segement blue LED with right hand decimal, https://docs.broadcom.com/docs/AV02-1588EN +2 digit 7 segement blue LED with right hand decimal +0 +10 +10 +Display +HDSP-48xx +10-Element Bar Graph Array https://docs.broadcom.com/docs/AV02-1798EN +10-Element Bar Graph Array +0 +20 +20 +Display +HDSP-4830 +10-Element Red Bar Graph Array https://docs.broadcom.com/docs/AV02-1798EN +10-Element Red Bar Graph Array +0 +20 +20 +Display +HDSP-4832 +10-Element Red Yellow Green Bar Graph Array https://docs.broadcom.com/docs/AV02-1798EN +10-Element Red Yellow Green Bar Graph Array +0 +20 +20 +Display +HDSP-4836 +10-Element Red Yellow Green Bar Graph Array https://docs.broadcom.com/docs/AV02-1798EN +10-Element Red Yellow Green Bar Graph Array +0 +20 +20 +Display +HDSP-4840 +10-Element Yellow Bar Graph Array https://docs.broadcom.com/docs/AV02-1798EN +10-Element Yellow Bar Graph Array +0 +20 +20 +Display +HDSP-4850 +10-Element Green Bar Graph Array https://docs.broadcom.com/docs/AV02-1798EN +10-Element Green Bar Graph Array +0 +20 +20 +Display +HLCP-J100 +10-Element Red Bar Graph Array https://docs.broadcom.com/docs/AV02-1798EN +10-Element Red Bar Graph Array +0 +20 +20 +Display +HY1602E +http://www.icbank.com/data/ICBShop/board/HY1602E.pdf +LCD 16x2 Alphanumeric 16pin +0 +20 +16 +Display +LCD-016N002L +16 x 2 Character LCD, http://www.vishay.com/product?docid=37299 +LCD-016N002L 16 x 2 Character LCD +0 +24 +20 +Display +LM16255 +LCD LM16255 16x2 character http://www.datasheetlib.com/datasheet/259542/lm16255_sharp-electronics.html +LCD 12x2 +0 +14 +14 +Display +NHD-0420H1Z +NHD-0420H1Z LCD http://www.newhavendisplay.com/specs/NHD-0420H1Z-FSW-GBW-33V3.pdf +NHD-0420H1Z LCD +0 +16 +16 +Display +NHD-C0220BiZ +NHD-C0220BiZ LCD http://www.newhavendisplay.com/specs/NHD-C0220BiZ-FSW-FBW-3V3M.pdf +NHD-C0220BiZ LCD +0 +10 +10 +Display +NHD-C12832A1Z-FSRGB +128x32 LCD with RGB backlight https://www.newhavendisplay.com/specs/NHD-C12832A1Z-FSRGB-FBW-3V.pdf +lcd rgb st7565 +0 +21 +21 +Display +OLED-128O064D +128x64 OLED display +display oled +0 +30 +30 +Display +RC1602A +http://www.raystar-optronics.com/down.php?ProID=18 +LCD 16x2 Alphanumeric 16pin +0 +22 +18 +Display +WC1602A +LCD 16x2 http://www.wincomlcd.com/pdf/WC1602A-SFYLYHTC06.pdf +LCD 16x2 Alphanumeric 16pin +0 +20 +16 +Display_7Segment +7SEGMENT-LED__HDSM531_HDSM533_SMD +7-Segment Display, HDSM53x, https://docs.broadcom.com/docs/AV02-0713EN +7segment LED HDSM531 HDSM533 +0 +10 +10 +Display_7Segment +7SegmentLED_LTS6760_LTS6780 +7-Segment Display, LTS67x0, http://optoelectronics.liteon.com/upload/download/DS30-2001-355/S6760jd.pdf +7Segment LED LTS6760 LTS6780 +0 +10 +10 +Display_7Segment +AD-121F2 +Single Digit 7-segment RGB LED Display, 1-inch digit height, common anode, http://usasyck.com/products/AD-121F2_cat_e.pdf +RGB LED digit +0 +22 +22 +Display_7Segment +AFF_2x7SEG-DIGIT_10mm +Afficheur 7 segments 10mm DIGIT +AFFICHEUR +0 +16 +16 +Display_7Segment +CA56-12CGKWA +4 digit 7 segment green LED, http://www.kingbright.com/attachments/file/psearch/000/00/00/CA56-12CGKWA(Ver.9A).pdf +4 digit 7 segment green LED +0 +12 +12 +Display_7Segment +CA56-12EWA +4 digit 7 segment green LED, http://www.kingbrightusa.com/images/catalog/SPEC/CA56-12EWA.pdf +4 digit 7 segment green LED +0 +12 +12 +Display_7Segment +CA56-12SEKWA +4 digit 7 segment green LED, http://www.kingbright.com/attachments/file/psearch/000/00/00/CA56-12SEKWA(Ver.7A).pdf +4 digit 7 segment green LED +0 +12 +12 +Display_7Segment +CA56-12SRWA +4 digit 7 segment green LED, http://www.kingbrightusa.com/images/catalog/SPEC/CA56-12SRWA.pdf +4 digit 7 segment green LED +0 +12 +12 +Display_7Segment +CA56-12SURKWA +4 digit 7 segment green LED, http://www.kingbright.com/attachments/file/psearch/000/00/00/CA56-12SURKWA(Ver.8A).pdf +4 digit 7 segment green LED +0 +12 +12 +Display_7Segment +CA56-12SYKWA +4 digit 7 segment green LED, http://www.kingbright.com/attachments/file/psearch/000/00/00/CA56-12SYKWA(Ver.6A).pdf +4 digit 7 segment green LED +0 +12 +12 +Display_7Segment +CC56-12GWA +4 digit 7 segment green LED, http://www.kingbrightusa.com/images/catalog/SPEC/CA56-11GWA.pdf +4 digit 7 segment green LED +0 +12 +12 +Display_7Segment +CC56-12YWA +4 digit 7 segment green LED, http://www.kingbrightusa.com/images/catalog/SPEC/CC56-12YWA.pdf +4 digit 7 segment green LED +0 +12 +12 +Display_7Segment +D1X8K +https://ia800903.us.archive.org/24/items/CTKD1x8K/Cromatek%20D168K.pdf +Single digit 7 segment ultra bright red +0 +10 +10 +Display_7Segment +DA04-11CGKWA +http://www.kingbright.com/attachments/file/psearch/000/00/00/DA04-11CGKWA(Ver.6A).pdf +Dubble digit green 7 segment LED display +0 +16 +16 +Display_7Segment +DA04-11SEKWA +http://www.kingbright.com/attachments/file/psearch/000/00/00/DA04-11SEKWA(Ver.9A).pdf +Dubble digit super bright orange 7 segment LED display +0 +16 +16 +Display_7Segment +DA04-11SURKWA +http://www.kingbright.com/attachments/file/psearch/000/00/00/DA04-11SURKWA(Ver.10A).pdf +Dubble digit hyper red 7 segment LED display +0 +16 +16 +Display_7Segment +DA04-11SYKWA +http://www.kingbright.com/attachments/file/psearch/000/00/00/DA04-11SYKWA(Ver.6A).pdf +Dubble digit super bright yellow 7 segment LED display +0 +16 +16 +Display_7Segment +DA56-11CGKWA +http://www.kingbright.com/attachments/file/psearch/000/00/00/DA56-11CGKWA(Ver.16A).pdf +Double digit seven segment green LED display +0 +18 +18 +Display_7Segment +DA56-11SEKWA +http://www.kingbright.com/attachments/file/psearch/000/00/00/DA56-11SEKWA(Ver.9A).pdf +Double digit seven segment super bright orange LED display +0 +18 +18 +Display_7Segment +DA56-11SURKWA +http://www.kingbright.com/attachments/file/psearch/000/00/00/DA56-11SURKWA(Ver.11A).pdf +Double digit seven segment hyper red LED display +0 +18 +18 +Display_7Segment +DA56-11SYKWA +http://www.kingbright.com/attachments/file/psearch/000/00/00/DA56-11SYKWA(Ver.11A).pdf +Double digit seven segment super bright yellow LED display +0 +18 +18 +Display_7Segment +DE113-XX-XX +http://www.display-elektronik.de/filter/DE113-RS-20_635.pdf +3 1/5 digit LOW BAT + 7-Segment LCD +0 +40 +40 +Display_7Segment +DE114-RS-20 +http://www.display-elektronik.de/filter/DE113-RS-20_635.pdf +3 1/5 digit reflective LCD LOW-BAT + 7-Segment +0 +40 +40 +Display_7Segment +DE119-XX-XX +https://www.display-elektronik.de/filter/DE119-RS-20_635.pdf +4 digit 7 segment LCD +0 +40 +40 +Display_7Segment +DE122-XX-XX +http://www.display-elektronik.de/filter/DE122-RS-20_635.pdf +6 digit 7 segment LCD +0 +50 +50 +Display_7Segment +DE152-XX-XX +https://tft-module.de/filter/DE152-RS-20_75.pdf +4 digit 7 segment LCD +0 +40 +40 +Display_7Segment +DE170-XX-XX +http://www.display-elektronik.de/filter/DE170-RS-20_75.pdf +3 1/5 digit reflective arrow bat + 7 segment LCD +0 +40 +40 +Display_7Segment +ELD_426XXXX +http://www.everlight.com/file/ProductFile/D426SYGWA-S530-E2.pdf +Double digit 7 segment brilliant yellow green LED +0 +10 +10 +Display_7Segment +HDSP-7401 +One digit 7 segment yellow, https://docs.broadcom.com/docs/AV02-2553EN +One digit 7 segment yellow +0 +10 +10 +Display_7Segment +HDSP-7507 ++-1 overflow 7 segment high efficiency red, https://docs.broadcom.com/docs/AV02-2553EN ++-1 overflow 7 segment high efficiency red +0 +10 +10 +Display_7Segment +HDSP-7801 +One digit 7 segment green, https://docs.broadcom.com/docs/AV02-2553EN +One digit 7 segment green +0 +10 +10 +Display_7Segment +HDSP-7807 ++-1 overflow 7 segment green, https://docs.broadcom.com/docs/AV02-2553EN ++-1 overflow 7 segment green +0 +10 +10 +Display_7Segment +HDSP-A151 +One digit 7 segment red, https://docs.broadcom.com/docs/AV02-2553EN +One digit 7 segment high efficiency red +0 +10 +10 +Display_7Segment +HDSP-A401 +One digit 7 segment orange, common anode, https://docs.broadcom.com/docs/AV02-2553EN +One digit 7 segment orange common anode +0 +10 +10 +Display_7Segment +KCSC02-105 +http://www.kingbright.com/attachments/file/psearch/000/00/00/KCSC02-105(Ver.9A).pdf +Single digit 7 segement hyper red LED +0 +10 +10 +Display_7Segment +KCSC02-106 +http://www.kingbright.com/attachments/file/psearch/000/00/00/KCSC02-106(Ver.10A).pdf +Single digit 7 segement super bright orange LED +0 +10 +10 +Display_7Segment +KCSC02-107 +http://www.kingbright.com/attachments/file/psearch/000/00/00/KCSC02-107(Ver.9A).pdf +Single digit 7 segement super bright yellow LED +0 +10 +10 +Display_7Segment +KCSC02-123 +http://www.kingbright.com/attachments/file/psearch/000/00/00/KCSC02-123(Ver.10A).pdf +Single digit 7 segement super bright yellow LED +0 +10 +10 +Display_7Segment +KCSC02-136 +http://www.kingbright.com/attachments/file/psearch/000/00/00/KCSC02-136(Ver.6B).pdf +Single digit 7 segement super bright yellow LED +0 +10 +10 +Display_7Segment +LTC-4627Jx +http://optoelectronics.liteon.com/upload/download/DS30-2001-393/C4627JG.pdf +4 digit 7 segment LED +0 +14 +14 +Display_7Segment +MAN71A +https://www.digchip.com/datasheets/parts/datasheet/161/MAN3640A-pdf.php +One digit 7 segment red LED with right dot +0 +14 +14 +Display_7Segment +MAN72A +https://www.digchip.com/datasheets/parts/datasheet/161/MAN3640A-pdf.php +One digit 7 segment red LED with left dot +0 +14 +14 +Display_7Segment +MAN73A +https://www.digchip.com/datasheets/parts/datasheet/161/MAN3640A-pdf.php +Overflow +- 1 red LED +0 +14 +14 +Display_7Segment +MAN3410A +https://www.digchip.com/datasheets/parts/datasheet/161/MAN3640A-pdf.php +One digit 7 segment green LED with dot +0 +14 +14 +Display_7Segment +MAN3420A +https://www.digchip.com/datasheets/parts/datasheet/161/MAN3640A-pdf.php +One digit 7 segment green LED with left dot +0 +14 +14 +Display_7Segment +MAN3610A +https://www.digchip.com/datasheets/parts/datasheet/161/MAN3640A-pdf.php +One digit 7 segment orange LED with right dot +0 +14 +14 +Display_7Segment +MAN3620A +https://www.digchip.com/datasheets/parts/datasheet/161/MAN3640A-pdf.php +One digit 7 segment orange LED with left dot +0 +14 +14 +Display_7Segment +MAN3630A +https://www.digchip.com/datasheets/parts/datasheet/161/MAN3640A-pdf.php +Overflow +- 1 orange LED +0 +14 +14 +Display_7Segment +MAN3810A +https://www.digchip.com/datasheets/parts/datasheet/161/MAN3640A-pdf.php +One digit 7 segment yellow LED with right dot +0 +14 +14 +Display_7Segment +MAN3820A +https://www.digchip.com/datasheets/parts/datasheet/161/MAN3640A-pdf.php +One digit 7 segment yellow LED with left dot +0 +14 +14 +Display_7Segment +SA15-11xxx +http://www.kingbrightusa.com/images/catalog/SPEC/SA15-11SRWA.pdf +SA15-11xxx single digit 7 segment display 38.1mm 1.5inch +0 +10 +10 +Display_7Segment +SBC18-11SURKCGKWA +http://www.kingbright.com/attachments/file/psearch/000/00/00/SBC18-11SURKCGKWA(Ver.6A).pdf +single digit 7 segemnt red/green LED +0 +10 +10 +Display_7Segment +Sx39-1xxxxx +Single digit 7 segment LED display in red, yellow or green colour http://www.kingbrightusa.com/images/catalog/SPEC/sa39-11ewa.pdf +One digit LED 7 segment SA39-11 SC39-11 SA39-12 SC39-12 +0 +10 +10 +Ferrite_THT +LairdTech_28C0236-0JW-10 +Ferrite, vertical, LairdTech 28C0236-0JW-10, https://assets.lairdtech.com/home/brandworld/files/28C0236-0JW-10.pdf, JW Miller core https://www.bourns.com/products/magnetic-products/j.w.-miller-through-hole-ferrite-beads-emi-filters +Ferrite vertical LairdTech 28C0236-0JW-10 +0 +2 +2 +Fiducial +Fiducial_0.5mm_Mask1.5mm +Circular Fiducial, 0.5mm bare copper, 1.5mm soldermask opening +fiducial +0 +1 +0 +Fiducial +Fiducial_0.5mm_Mask1mm +Circular Fiducial, 0.5mm bare copper, 1mm soldermask opening (Level C) +fiducial +0 +1 +0 +Fiducial +Fiducial_0.75mm_Mask1.5mm +Circular Fiducial, 0.75mm bare copper, 1.5mm soldermask opening (Level B) +fiducial +0 +1 +0 +Fiducial +Fiducial_0.75mm_Mask2.25mm +Circular Fiducial, 0.75mm bare copper, 2.25mm soldermask opening +fiducial +0 +1 +0 +Fiducial +Fiducial_1.5mm_Mask3mm +Circular Fiducial, 1.5mm bare copper, 3mm soldermask opening +fiducial +0 +1 +0 +Fiducial +Fiducial_1.5mm_Mask4.5mm +Circular Fiducial, 1.5mm bare copper, 4.5mm soldermask opening +fiducial +0 +1 +0 +Fiducial +Fiducial_1mm_Mask2mm +Circular Fiducial, 1mm bare copper, 2mm soldermask opening (Level A) +fiducial +0 +1 +0 +Fiducial +Fiducial_1mm_Mask3mm +Circular Fiducial, 1mm bare copper, 3mm soldermask opening (recommended) +fiducial +0 +1 +0 +Filter +Filter_1109-5_1.1x0.9mm +5-pin SAW filter package - 1.1x0.9 mm Body; (see https://www.murata.com/~/media/webrenewal/support/library/catalog/products/filter/rf/p73e.ashx?la=en-gb) +Filter 5 +0 +5 +5 +Filter +Filter_1411-5_1.4x1.1mm +5-pin filter package - 1.4x1.1 mm Body; (see https://global.kyocera.com/prdct/electro/product/pdf/sf14_tdlte.pdf) +Filter 5 +0 +5 +5 +Filter +Filter_Bourns_SRF0905_6.0x9.2mm +https://www.bourns.com/docs/Product-Datasheets/SRF0905.pdf +Line Filter +0 +4 +4 +Filter +Filter_FILTERCON_1FPxx +0.5A, 250VAC, 50/60Hz line filter (https://filtercon.com.pl/wp-content/uploads/2019/07/Karta-katalogowa-FP-12-1.pdf) +EMI filter +0 +4 +4 +Filter +Filter_Mini-Circuits_FV1206 +Mini-Circuits Filter SMD 1206 https://ww2.minicircuits.com/case_style/FV1206.pdf +Mini-Circuits Filter SMD 1206 +0 +6 +4 +Filter +Filter_Mini-Circuits_FV1206-1 +Mini-Circuits Filter SMD 1206 https://ww2.minicircuits.com/case_style/FV1206-1.pdf +Mini-Circuits Filter SMD 1206 +0 +6 +6 +Filter +Filter_Mini-Circuits_FV1206-4 +Mini-Circuits Filter SMD 1206 https://ww2.minicircuits.com/case_style/FV1206-4.pdf +Mini-Circuits Filter SMD 1206 +0 +8 +4 +Filter +Filter_Mini-Circuits_FV1206-5 +Mini-Circuits Filter SMD 1206 https://ww2.minicircuits.com/case_style/FV1206-5.pdf +Mini-Circuits Filter SMD 1206 +0 +8 +4 +Filter +Filter_Mini-Circuits_FV1206-6 +Mini-Circuits Filter SMD 1206 https://ww2.minicircuits.com/case_style/FV1206-6.pdf +Mini-Circuits Filter SMD 1206 +0 +14 +8 +Filter +Filter_Mini-Circuits_FV1206-7 +Mini-Circuits Filter SMD 1206 https://ww2.minicircuits.com/case_style/FV1206-7.pdf +Mini-Circuits Filter SMD 1206 +0 +5 +3 +Filter +Filter_Murata_BNX025 +https://www.murata.com/en-us/products/productdata/8796778004510/QNFH9101.pdf?1496719830000 +EMI Filter +0 +6 +4 +Filter +Filter_Murata_BNX025_ThermalVias +https://www.murata.com/en-us/products/productdata/8796778004510/QNFH9101.pdf?1496719830000 +EMI Filter +0 +19 +4 +Filter +Filter_Murata_SFECF-6 +SMD Type 10.7MHz Ceramic Filter https://www.murata.com/en-us/products/filter/cerafil/sfecf +10.7MHz smd ceramic +0 +6 +6 +Filter +Filter_Murata_SFECF-6_HandSoldering +SMD Type 10.7MHz Ceramic Filter https://www.murata.com/en-us/products/filter/cerafil/sfecf +10.7MHz smd ceramic +0 +6 +6 +Filter +Filter_SAW-6_3.8x3.8mm +6-pin 3.8 x 3.8mm SAW filter package, https://www.golledge.com/media/3785/mp08167.pdf +SAW filter 6-pin +0 +6 +6 +Filter +Filter_SAW-8_3.8x3.8mm +8-pin 3.8x3.8mm SAW filter, https://www.golledge.com/media/1831/ma05497.pdf +SAW filter 8-pin +0 +8 +8 +Filter +Filter_SAW_Epcos_DCC6C_3x3mm +EPCOS/TDK Electronics/Qualcomm DCC6c SAW filter package based on EPCOS app note 93 (https://www.catagle.com/45-2/PDF_AN93.htm) +SAW filter 6-pin +0 +6 +6 +Filter +Filter_Schaffner_FN405 +Compact PCB mounting EMI filter (https://www.schaffner.com/product/FN405/Schaffner_datasheet_FN405.pdf) +EMI filter +0 +5 +5 +Filter +Filter_Schaffner_FN406 +Ultra Compact EMC Filter (https://www.schaffner.com/product/FN406/Schaffner_datasheet_FN406.pdf) +emi filter +0 +5 +5 +Fuse +FuseHolder_Blade_ATO_Littelfuse_FLR_178.6165 +Littelfuse fuse holder for ATO/FKS blade fuses, 80V, vertical, 20 x 6mm, PCB thickness up to 1.5mm, http://www.littelfuse.com/~/media/commercial-vehicle/datasheets/automotive-fuse-holders/ato/littelfuse-fuse-holder-ato-flr-pcb-datasheet.pdf +ATO FKS blade fuse holder +0 +8 +2 +Fuse +Fuse_0402_1005Metric +Fuse SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +fuse +0 +2 +2 +Fuse +Fuse_0402_1005Metric_Pad0.77x0.64mm_HandSolder +Fuse SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +fuse handsolder +0 +2 +2 +Fuse +Fuse_0603_1608Metric +Fuse SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +fuse +0 +2 +2 +Fuse +Fuse_0603_1608Metric_Pad1.05x0.95mm_HandSolder +Fuse SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +fuse handsolder +0 +2 +2 +Fuse +Fuse_0805_2012Metric +Fuse SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator +fuse +0 +2 +2 +Fuse +Fuse_0805_2012Metric_Pad1.15x1.40mm_HandSolder +Fuse SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator +fuse handsolder +0 +2 +2 +Fuse +Fuse_1206_3216Metric +Fuse SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +fuse +0 +2 +2 +Fuse +Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder +Fuse SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +fuse handsolder +0 +2 +2 +Fuse +Fuse_1210_3225Metric +Fuse SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +fuse +0 +2 +2 +Fuse +Fuse_1210_3225Metric_Pad1.42x2.65mm_HandSolder +Fuse SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +fuse handsolder +0 +2 +2 +Fuse +Fuse_1812_4532Metric +Fuse SMD 1812 (4532 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://www.nikhef.nl/pub/departments/mt/projects/detectorR_D/dtddice/ERJ2G.pdf), generated with kicad-footprint-generator +fuse +0 +2 +2 +Fuse +Fuse_1812_4532Metric_Pad1.30x3.40mm_HandSolder +Fuse SMD 1812 (4532 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://www.nikhef.nl/pub/departments/mt/projects/detectorR_D/dtddice/ERJ2G.pdf), generated with kicad-footprint-generator +fuse handsolder +0 +2 +2 +Fuse +Fuse_2010_5025Metric +Fuse SMD 2010 (5025 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +fuse +0 +2 +2 +Fuse +Fuse_2010_5025Metric_Pad1.52x2.65mm_HandSolder +Fuse SMD 2010 (5025 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +fuse handsolder +0 +2 +2 +Fuse +Fuse_2512_6332Metric +Fuse SMD 2512 (6332 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +fuse +0 +2 +2 +Fuse +Fuse_2512_6332Metric_Pad1.52x3.35mm_HandSolder +Fuse SMD 2512 (6332 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +fuse handsolder +0 +2 +2 +Fuse +Fuse_2920_7451Metric +Fuse SMD 2920 (7451 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size from: http://www.megastar.com/products/fusetronic/polyswitch/PDF/smd2920.pdf), generated with kicad-footprint-generator +fuse +0 +2 +2 +Fuse +Fuse_2920_7451Metric_Pad2.10x5.45mm_HandSolder +Fuse SMD 2920 (7451 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size from: http://www.megastar.com/products/fusetronic/polyswitch/PDF/smd2920.pdf), generated with kicad-footprint-generator +fuse handsolder +0 +2 +2 +Fuse +Fuse_BelFuse_0ZRE0005FF_L8.3mm_W3.8mm +Fuse 0ZRE0005FF, BelFuse, Radial Leaded PTC, https://www.belfuse.com/resources/datasheets/circuitprotection/ds-cp-0zre-series.pdf +0ZRE BelFuse radial PTC +0 +2 +2 +Fuse +Fuse_BelFuse_0ZRE0008FF_L8.3mm_W3.8mm +Fuse 0ZRE0008FF, BelFuse, Radial Leaded PTC,https://www.belfuse.com/resources/datasheets/circuitprotection/ds-cp-0zre-series.pdf +0ZRE BelFuse radial PTC +0 +2 +2 +Fuse +Fuse_BelFuse_0ZRE0012FF_L8.3mm_W3.8mm +Fuse 0ZRE0012FF, BelFuse, Radial Leaded PTC,https://www.belfuse.com/resources/datasheets/circuitprotection/ds-cp-0zre-series.pdf +0ZRE BelFuse radial PTC +0 +2 +2 +Fuse +Fuse_BelFuse_0ZRE0016FF_L9.9mm_W3.8mm +Fuse 0ZRE0016FF, BelFuse, Radial Leaded PTC,https://www.belfuse.com/resources/datasheets/circuitprotection/ds-cp-0zre-series.pdf +0ZRE BelFuse radial PTC +0 +2 +2 +Fuse +Fuse_BelFuse_0ZRE0025FF_L9.6mm_W3.8mm +Fuse 0ZRE0025FF, BelFuse, Radial Leaded PTC,https://www.belfuse.com/resources/datasheets/circuitprotection/ds-cp-0zre-series.pdf +0ZRE BelFuse radial PTC +0 +2 +2 +Fuse +Fuse_BelFuse_0ZRE0033FF_L11.4mm_W3.8mm +Fuse 0ZRE0033FF, BelFuse, Radial Leaded PTC,https://www.belfuse.com/resources/datasheets/circuitprotection/ds-cp-0zre-series.pdf +0ZRE BelFuse radial PTC +0 +2 +2 +Fuse +Fuse_BelFuse_0ZRE0040FF_L11.5mm_W3.8mm +Fuse 0ZRE0040FF, BelFuse, Radial Leaded PTC,https://www.belfuse.com/resources/datasheets/circuitprotection/ds-cp-0zre-series.pdf +0ZRE BelFuse radial PTC +0 +2 +2 +Fuse +Fuse_BelFuse_0ZRE0055FF_L14.0mm_W4.1mm +Fuse 0ZRE0055FF, BelFuse, Radial Leaded PTC,https://www.belfuse.com/resources/datasheets/circuitprotection/ds-cp-0zre-series.pdf +0ZRE BelFuse radial PTC +0 +2 +2 +Fuse +Fuse_BelFuse_0ZRE0075FF_L11.5mm_W4.8mm +Fuse 0ZRE0075FF, BelFuse, Radial Leaded PTC,https://www.belfuse.com/resources/datasheets/circuitprotection/ds-cp-0zre-series.pdf +0ZRE BelFuse radial PTC +0 +2 +2 +Fuse +Fuse_BelFuse_0ZRE0100FF_L18.7mm_W5.1mm +Fuse 0ZRE0100FF, BelFuse, Radial Leaded PTC,https://www.belfuse.com/resources/datasheets/circuitprotection/ds-cp-0zre-series.pdf +0ZRE BelFuse radial PTC +0 +2 +2 +Fuse +Fuse_BelFuse_0ZRE0125FF_L21.2mm_W5.3mm +Fuse 0ZRE0125FF, BelFuse, Radial Leaded PTC,https://www.belfuse.com/resources/datasheets/circuitprotection/ds-cp-0zre-series.pdf +0ZRE BelFuse radial PTC +0 +2 +2 +Fuse +Fuse_BelFuse_0ZRE0150FF_L23.4mm_W5.3mm +Fuse 0ZRE0150FF, BelFuse, Radial Leaded PTC,https://www.belfuse.com/resources/datasheets/circuitprotection/ds-cp-0zre-series.pdf +0ZRE BelFuse radial PTC +0 +2 +2 +Fuse +Fuse_BelFuse_0ZRE0200FF_L24.9mm_W6.1mm +Fuse 0ZRE0200FF, BelFuse, Radial Leaded PTC,https://www.belfuse.com/resources/datasheets/circuitprotection/ds-cp-0zre-series.pdf +0ZRE BelFuse radial PTC +0 +2 +2 +Fuse +Fuse_Blade_ATO_directSolder +car blade fuse direct solder +car blade fuse +0 +2 +2 +Fuse +Fuse_Blade_Mini_directSolder +car blade fuse mini, direct solder +car blade fuse mini +0 +2 +2 +Fuse +Fuse_Bourns_MF-RG300 +PTC Resettable Fuse, Ihold = 3.0A, Itrip=5.1A, http://www.bourns.com/docs/Product-Datasheets/mfrg.pdf +ptc resettable fuse polyfuse THT +0 +2 +2 +Fuse +Fuse_Bourns_MF-RG400 +PTC Resettable Fuse, Ihold = 4.0A, Itrip=6.8A, http://www.bourns.com/docs/Product-Datasheets/mfrg.pdf +ptc resettable fuse polyfuse THT +0 +2 +2 +Fuse +Fuse_Bourns_MF-RG500 +PTC Resettable Fuse, Ihold = 5.0A, Itrip=8.5A, http://www.bourns.com/docs/Product-Datasheets/mfrg.pdf +ptc resettable fuse polyfuse THT +0 +2 +2 +Fuse +Fuse_Bourns_MF-RG600 +PTC Resettable Fuse, Ihold = 6.0A, Itrip=10.2A, http://www.bourns.com/docs/Product-Datasheets/mfrg.pdf +ptc resettable fuse polyfuse THT +0 +2 +2 +Fuse +Fuse_Bourns_MF-RG650 +PTC Resettable Fuse, Ihold = 6.5A, Itrip=11.1A, http://www.bourns.com/docs/Product-Datasheets/mfrg.pdf +ptc resettable fuse polyfuse THT +0 +2 +2 +Fuse +Fuse_Bourns_MF-RG700 +PTC Resettable Fuse, Ihold = 7.0A, Itrip=11.9A, http://www.bourns.com/docs/Product-Datasheets/mfrg.pdf +ptc resettable fuse polyfuse THT +0 +2 +2 +Fuse +Fuse_Bourns_MF-RG800 +PTC Resettable Fuse, Ihold = 8.0A, Itrip=13.6A, http://www.bourns.com/docs/Product-Datasheets/mfrg.pdf +ptc resettable fuse polyfuse THT +0 +2 +2 +Fuse +Fuse_Bourns_MF-RG900 +PTC Resettable Fuse, Ihold = 9.0A, Itrip=15.3A, http://www.bourns.com/docs/Product-Datasheets/mfrg.pdf +ptc resettable fuse polyfuse THT +0 +2 +2 +Fuse +Fuse_Bourns_MF-RG1000 +PTC Resettable Fuse, Ihold = 10.0A, Itrip=17.0A, http://www.bourns.com/docs/Product-Datasheets/mfrg.pdf +ptc resettable fuse polyfuse THT +0 +2 +2 +Fuse +Fuse_Bourns_MF-RG1100 +PTC Resettable Fuse, Ihold = 11.0A, Itrip=18.7A, http://www.bourns.com/docs/Product-Datasheets/mfrg.pdf +ptc resettable fuse polyfuse THT +0 +2 +2 +Fuse +Fuse_Bourns_MF-RHT050 +PTC Resettable Fuse, Ihold = 0.5A, Itrip=0.92A, http://www.bourns.com/docs/product-datasheets/mfrht.pdf +ptc resettable fuse polyfuse THT +0 +2 +2 +Fuse +Fuse_Bourns_MF-RHT070 +PTC Resettable Fuse, Ihold = 0.7A, Itrip=1.4A, http://www.bourns.com/docs/product-datasheets/mfrht.pdf +ptc resettable fuse polyfuse THT +0 +2 +2 +Fuse +Fuse_Bourns_MF-RHT100 +PTC Resettable Fuse, Ihold = 1.0A, Itrip=1.8A, http://www.bourns.com/docs/product-datasheets/mfrht.pdf +ptc resettable fuse polyfuse THT +0 +2 +2 +Fuse +Fuse_Bourns_MF-RHT200 +PTC Resettable Fuse, Ihold = 2.0A, Itrip=3.8A, http://www.bourns.com/docs/product-datasheets/mfrht.pdf +ptc resettable fuse polyfuse THT +0 +2 +2 +Fuse +Fuse_Bourns_MF-RHT300 +PTC Resettable Fuse, Ihold = 3.0A, Itrip=6.0A, http://www.bourns.com/docs/product-datasheets/mfrht.pdf +ptc resettable fuse polyfuse THT +0 +2 +2 +Fuse +Fuse_Bourns_MF-RHT400 +PTC Resettable Fuse, Ihold = 4.0A, Itrip=7.5A, http://www.bourns.com/docs/product-datasheets/mfrht.pdf +ptc resettable fuse polyfuse THT +0 +2 +2 +Fuse +Fuse_Bourns_MF-RHT500 +PTC Resettable Fuse, Ihold = 5.0A, Itrip=9.0A, http://www.bourns.com/docs/product-datasheets/mfrht.pdf +ptc resettable fuse polyfuse THT +0 +2 +2 +Fuse +Fuse_Bourns_MF-RHT550 +PTC Resettable Fuse, Ihold = 5.5A, Itrip=10.0A, http://www.bourns.com/docs/product-datasheets/mfrht.pdf +ptc resettable fuse polyfuse THT +0 +2 +2 +Fuse +Fuse_Bourns_MF-RHT600 +PTC Resettable Fuse, Ihold = 6.0A, Itrip=10.8A, http://www.bourns.com/docs/product-datasheets/mfrht.pdf +ptc resettable fuse polyfuse THT +0 +2 +2 +Fuse +Fuse_Bourns_MF-RHT650 +PTC Resettable Fuse, Ihold = 6.5A, Itrip=12.0A, http://www.bourns.com/docs/product-datasheets/mfrht.pdf +ptc resettable fuse polyfuse THT +0 +2 +2 +Fuse +Fuse_Bourns_MF-RHT700 +PTC Resettable Fuse, Ihold = 7.0A, Itrip=13.0A, http://www.bourns.com/docs/product-datasheets/mfrht.pdf +ptc resettable fuse polyfuse THT +0 +2 +2 +Fuse +Fuse_Bourns_MF-RHT750 +PTC Resettable Fuse, Ihold = 7.5A, Itrip=13.1A, http://www.bourns.com/docs/product-datasheets/mfrht.pdf +ptc resettable fuse polyfuse THT +0 +2 +2 +Fuse +Fuse_Bourns_MF-RHT800 +PTC Resettable Fuse, Ihold = 8.0A, Itrip=15.0A, http://www.bourns.com/docs/product-datasheets/mfrht.pdf +ptc resettable fuse polyfuse THT +0 +2 +2 +Fuse +Fuse_Bourns_MF-RHT900 +PTC Resettable Fuse, Ihold = 9.0A, Itrip=16.5A, http://www.bourns.com/docs/product-datasheets/mfrht.pdf +ptc resettable fuse polyfuse THT +0 +2 +2 +Fuse +Fuse_Bourns_MF-RHT1000 +PTC Resettable Fuse, Ihold = 10.0A, Itrip=18.5A, http://www.bourns.com/docs/product-datasheets/mfrht.pdf +ptc resettable fuse polyfuse THT +0 +2 +2 +Fuse +Fuse_Bourns_MF-RHT1100 +PTC Resettable Fuse, Ihold = 11.0A, Itrip=20.0A, http://www.bourns.com/docs/product-datasheets/mfrht.pdf +ptc resettable fuse polyfuse THT +0 +2 +2 +Fuse +Fuse_Bourns_MF-RHT1300 +PTC Resettable Fuse, Ihold = 13.0A, Itrip=24.0A, http://www.bourns.com/docs/product-datasheets/mfrht.pdf +ptc resettable fuse polyfuse THT +0 +2 +2 +Fuse +Fuse_Bourns_MF-SM_7.98x5.44mm +https://www.bourns.com/docs/Product-Datasheets/mfsm.pdf +bourns ptc resettable fuse polyfuse MF-SM MF-SMHT +0 +2 +2 +Fuse +Fuse_Bourns_MF-SM_9.5x6.71mm +https://www.bourns.com/docs/Product-Datasheets/mfsm.pdf +bourns ptc resettable fuse polyfuse MF-SM MF-SMHT +0 +2 +2 +Fuse +Fuse_Bourns_TBU-CA +Bourns TBU-CA Fuse, 2 Pin (https://www.bourns.com/data/global/pdfs/TBU-CA.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +Bourns Fuse NoLead +0 +3 +3 +Fuse +Fuse_Littelfuse-LVR100 +Littelfuse, resettable fuse, PTC, polyswitch LVR100, Ih 1A http://www.littelfuse.com/~/media/electronics/datasheets/resettable_ptcs/littelfuse_ptc_lvr_catalog_datasheet.pdf.pdf +LVR100 PTC resettable polyswitch +0 +2 +2 +Fuse +Fuse_Littelfuse-LVR125 +Littelfuse, resettable fuse, PTC, polyswitch LVR125, Ih 1.25A, http://www.littelfuse.com/~/media/electronics/datasheets/resettable_ptcs/littelfuse_ptc_lvr_catalog_datasheet.pdf.pdf +LVR125 PTC resettable polyswitch +0 +2 +2 +Fuse +Fuse_Littelfuse-LVR200 +Littelfuse, resettable fuse, PTC, polyswitch LVR200, Ih 2A, http://www.littelfuse.com/~/media/electronics/datasheets/resettable_ptcs/littelfuse_ptc_lvr_catalog_datasheet.pdf.pdf +LVR200 PTC resettable polyswitch +0 +2 +2 +Fuse +Fuse_Littelfuse-NANO2-451_453 +Littelfuse NANO2 https://www.littelfuse.com/~/media/electronics/datasheets/fuses/littelfuse_fuse_451_453_datasheet.pdf.pdf +Fuse Nano2 +0 +2 +2 +Fuse +Fuse_Littelfuse-NANO2-462 +Littelfuse NANO2, 250VAC/VDC, 350VAC/VDC, 10.5 x 4.5 x 4.5mm, https://www.littelfuse.com/media?resourcetype=datasheets&itemid=6201db33-6e55-43f2-b41f-15e38bdd2c99&filename=littelfuse-fuse-462-datasheet +Fuse Nano2 462 +0 +2 +2 +Fuse +Fuse_Littelfuse-NANO2-885 +Littelfuse NANO2, 350VAC, 450/500VDC, 10.86 x 4.78 x 4.78mm, https://www.littelfuse.com/media?resourcetype=datasheets&itemid=888f12ed-ed3b-4b45-b910-06af8854ad76&filename=littelfuse-fuse-885-datasheet +Fuse Nano2 885 +0 +2 +2 +Fuse +Fuse_Littelfuse_372_D8.50mm +Fuse, Littelfuse, 372, 8.5x8mm, https://www.littelfuse.com/~/media/electronics/datasheets/fuses/littelfuse_fuse_372_datasheet.pdf.pdf +fuse tht radial +0 +2 +2 +Fuse +Fuse_Littelfuse_395Series +Fuse, TE5, Littelfuse/Wickmann, No. 460, No560, +Fuse TE5 Littelfuse/Wickmann No. 460 No560 +0 +2 +2 +Fuse +Fuse_Schurter_UMT250 +Surface Mount Fuse, 3 x 10.1 mm, Time-Lag T, 250 VAC, 125 VDC (https://us.schurter.com/bundles/snceschurter/epim/_ProdPool_/newDS/en/typ_UMT_250.pdf) +Schurter fuse smd +0 +2 +2 +Fuse +Fuse_Schurter_UMZ250 +Surface Mount Fuse with Clip, 4.2 x 11.1 mm, Time-Lag T, 250 VAC, 125 VDC (https://us.schurter.com/bundles/snceschurter/epim/_ProdPool_/newDS/en/typ_UMZ_250.pdf) +fuse smd mount holder +0 +2 +2 +Fuse +Fuse_SunFuse-6HP +SunFuse Ceramic Slow Blow Fuse 6H_6HP.PDF +UL/CSA 6x32mm Ceramic Slow Blow Fuse +0 +2 +2 +Fuse +Fuseholder_Blade_ATO_Littelfuse_Pudenz_2_Pin +Fuseholder ATO Blade littelfuse Pudenz 2 Pin +Fuseholder ATO Blade littelfuse Pudenz 2 Pin +0 +2 +2 +Fuse +Fuseholder_Blade_Mini_Keystone_3568 +fuse holder, car blade fuse mini, http://www.keyelco.com/product-pdf.cfm?p=306 +car blade fuse mini +0 +4 +2 +Fuse +Fuseholder_Clip-5x20mm_Bel_FC-203-22_Lateral_P17.80x5.00mm_D1.17mm_Horizontal +Fuseholder Clips, 5x20mm Cylinder Fuse, Pins Lateral, Horizontal, Bel FC-203-22, https://www.belfuse.com/resources/datasheets/circuitprotection/ds-cp-0672-fuse-clips-series.pdf +fuse clip open +0 +4 +2 +Fuse +Fuseholder_Clip-5x20mm_Eaton_1A5601-01_Inline_P20.80x6.76mm_D1.70mm_Horizontal +Fuseholder Clips, 5x20mm Cylinder Fuse, Pins Inline, Horizontal, Eaton 1A5601-01, https://www.eaton.com/content/dam/eaton/products/electronic-components/resources/data-sheet/eaton-1axxxx-pcb-fuse-clips-atc-atm-blade-data-sheet.pdf +fuse clip open +0 +4 +2 +Fuse +Fuseholder_Clip-5x20mm_Keystone_3512P_Inline_P23.62x7.27mm_D1.02x2.41x1.02x1.57mm_Horizontal +Fuseholder Clips, 5x20mm Cylinder Fuse, Pins Inline, Horizontal, Keystone 3512P, http://www.keyelco.com/product-pdf.cfm?p=1386 +fuse clip open +0 +4 +2 +Fuse +Fuseholder_Clip-5x20mm_Keystone_3512_Inline_P23.62x7.27mm_D1.02x1.57mm_Horizontal +Fuseholder Clips, 5x20mm Cylinder Fuse, Pins Inline, Horizontal, Keystone 3512, http://www.keyelco.com/product-pdf.cfm?p=356 +fuse clip open +0 +4 +2 +Fuse +Fuseholder_Clip-5x20mm_Keystone_3517_Inline_P23.11x6.76mm_D1.70mm_Horizontal +Fuseholder Clips, 5x20mm Cylinder Fuse, Pins Inline, Horizontal, Keystone 3517, http://www.keyelco.com/product-pdf.cfm?p=354 +fuse clip open +0 +4 +2 +Fuse +Fuseholder_Clip-5x20mm_Keystone_3518P_Inline_P23.11x6.76mm_D2.44x1.70mm_Horizontal +Fuseholder Clips, 5x20mm Cylinder Fuse, Pins Inline, Horizontal, Keystone 3518P, http://www.keyelco.com/product-pdf.cfm?p=1387 +fuse clip open +0 +4 +2 +Fuse +Fuseholder_Clip-5x20mm_Littelfuse_100_Inline_P20.50x4.60mm_D1.30mm_Horizontal +Fuseholder Clips, 5x20mm Cylinder Fuse, Pins Inline, Horizontal, Littelfuse 100, https://m.littelfuse.com/~/media/electronics/datasheets/fuse_clips/littelfuse_fuse_clip_100_445_030_520_datasheet.pdf.pdf +fuse clip open +0 +4 +2 +Fuse +Fuseholder_Clip-5x20mm_Littelfuse_111_Inline_P20.00x5.00mm_D1.05mm_Horizontal +Fuseholder Clips, 5x20mm Cylinder Fuse, Pins Inline, Horizontal, Littelfuse 111, https://m.littelfuse.com/~/media/electronics/datasheets/fuse_clips/littelfuse_fuse_clip_111_519_datasheet.pdf.pdf +fuse clip open +0 +4 +2 +Fuse +Fuseholder_Clip-5x20mm_Littelfuse_111_Lateral_P18.80x5.00mm_D1.17mm_Horizontal +Fuseholder Clips, 5x20mm Cylinder Fuse, Pins Inline, Horizontal, Littelfuse 111 (501 and 506), https://m.littelfuse.com/~/media/electronics/datasheets/fuse_clips/littelfuse_fuse_clip_111_datasheet.pdf.pdf +fuse clip open +0 +4 +2 +Fuse +Fuseholder_Clip-5x20mm_Littelfuse_445-030_Inline_P20.50x5.20mm_D1.30mm_Horizontal +Fuseholder Clips, 5x20mm Cylinder Fuse, Pins Inline, Horizontal, Littelfuse 445/030, https://m.littelfuse.com/~/media/electronics/datasheets/fuse_clips/littelfuse_fuse_clip_100_445_030_520_datasheet.pdf.pdf +fuse clip open +0 +4 +2 +Fuse +Fuseholder_Clip-5x20mm_Littelfuse_519_Inline_P20.60x5.00mm_D1.00mm_Horizontal +Fuseholder Clips, 5x20mm Cylinder Fuse, Pins Inline, Horizontal, Littelfuse 519, https://m.littelfuse.com/~/media/electronics/datasheets/fuse_clips/littelfuse_fuse_clip_111_519_datasheet.pdf.pdf +fuse clip open +0 +4 +2 +Fuse +Fuseholder_Clip-5x20mm_Littelfuse_520_Inline_P20.50x5.80mm_D1.30mm_Horizontal +Fuseholder Clips, 5x20mm Cylinder Fuse, Pins Inline, Horizontal, Littelfuse 520, https://m.littelfuse.com/~/media/electronics/datasheets/fuse_clips/littelfuse_fuse_clip_100_445_030_520_datasheet.pdf.pdf +fuse clip open +0 +4 +2 +Fuse +Fuseholder_Clip-5x20mm_Littelfuse_521_Lateral_P17.00x5.00mm_D1.30mm_Horizontal +Fuseholder Clips, 5x20mm Cylinder Fuse, Pins Inline, Horizontal, Littelfuse 521, https://www.littelfuse.com/~/media/electronics/datasheets/fuse_clips/littelfuse_fuse_clip_520_521_102071_datasheet.pdf.pdf +fuse clip open +0 +4 +2 +Fuse +Fuseholder_Clip-5x20mm_Schurter_CQM_Inline_P20.60x5.00mm_D1.00mm_Horizontal +Fuseholder Clips, 5x20mm Cylinder Fuse, Pins Inline, Horizontal, Schurter CQM (0752), https://www.schurter.com/en/datasheet/typ_CQM.pdf +fuse clip open +0 +4 +2 +Fuse +Fuseholder_Clip-5x20mm_Schurter_OG_Lateral_P15.00x5.00mm_D1.3mm_Horizontal +Fuseholder Clips, 5x20mm Cylinder Fuse, Pins Inline, Horizontal, Schurter OG, https://ch.schurter.com/en/datasheet/typ_OG__Clip__5x20.pdf +fuse clip open +0 +4 +2 +Fuse +Fuseholder_Clip-6.3x32mm_Littelfuse_102_122_Inline_P34.21x7.62mm_D1.98mm_Horizontal +Fuseholder Clips, 6.3x32mm Cylinder Fuse, Pins Inline, Horizontal, Littelfuse 102/122 Straight Leads, https://www.littelfuse.com/~/media/electronics/datasheets/fuse_clips/littelfuse_fuse_clip_102_122_datasheet.pdf.pdf +fuse clip open +0 +4 +2 +Fuse +Fuseholder_Clip-6.3x32mm_Littelfuse_102_Inline_P34.21x7.62mm_D2.54mm_Horizontal +Fuseholder Clips, 6.3x32mm Cylinder Fuse, Pins Inline, Horizontal, Littelfuse 102 Bowed Leads, https://www.littelfuse.com/~/media/electronics/datasheets/fuse_clips/littelfuse_fuse_clip_102_122_datasheet.pdf.pdf +fuse clip open +0 +4 +2 +Fuse +Fuseholder_Clip-6.3x32mm_Littelfuse_122_Inline_P34.21x7.62mm_D2.54mm_Horizontal +Fuseholder Clips, 6.3x32mm Cylinder Fuse, Pins Inline, Horizontal, Littelfuse 122 Bowed Leads, https://www.littelfuse.com/~/media/electronics/datasheets/fuse_clips/littelfuse_fuse_clip_102_122_datasheet.pdf.pdf +fuse clip open +0 +4 +2 +Fuse +Fuseholder_Clip-6.3x32mm_Littelfuse_102071_Inline_P34.70x7.60mm_D2.00mm_Horizontal +Fuseholder Clips, 6.3x32mm Cylinder Fuse, Pins Inline, Horizontal, Littelfuse 102071, https://www.littelfuse.com/~/media/electronics/datasheets/fuse_clips/littelfuse_fuse_clip_520_521_102071_datasheet.pdf.pdf +fuse clip open +0 +4 +2 +Fuse +Fuseholder_Cylinder-5x20mm_Bulgin_FX0456_Vertical_Closed +Fuseholder, 5x20, closed, vertical, Bulgin, FX0456, https://www.bulgin.com/products/pub/media/bulgin/data/Fuseholders.pdf +Fuseholder 5x20 closed vertical Bulgin FX0456 Sicherungshalter +0 +2 +2 +Fuse +Fuseholder_Cylinder-5x20mm_Bulgin_FX0457_Horizontal_Closed +Fuseholder, 5x20, closed, horizontal, Bulgin, FX0457, Sicherungshalter, +Fuseholder 5x20 closed horizontal Bulgin FX0457 Sicherungshalter +0 +2 +2 +Fuse +Fuseholder_Cylinder-5x20mm_EATON_H15-V-1_Vertical_Closed +PCB fuse holders for 5 mm x 20 mm fuses; 250V; 10A (http://www.cooperindustries.com/content/dam/public/bussmann/Electronics/Resources/product-datasheets/bus-elx-ds-4426-h15.pdf) +fuse holder vertical 5x20mm +0 +2 +2 +Fuse +Fuseholder_Cylinder-5x20mm_EATON_HBV_Vertical_Closed +5 mm x 20 mm fuse holders; Vertical w/ Stability Pins; 250V; 6.3-16A (http://www.cooperindustries.com/content/dam/public/bussmann/Electronics/Resources/product-datasheets/Bus_Elx_DS_2118_HB_PCB_Series.pdf) +fuse holder vertical 5x20mm +0 +2 +2 +Fuse +Fuseholder_Cylinder-5x20mm_EATON_HBW_Vertical_Closed +5 mm x 20 mm fuse holders; Vertical w/o Stability Pins; 250V; 6.3-16A (http://www.cooperindustries.com/content/dam/public/bussmann/Electronics/Resources/product-datasheets/Bus_Elx_DS_2118_HB_PCB_Series.pdf) +fuse holder vertical 5x20mm +0 +2 +2 +Fuse +Fuseholder_Cylinder-5x20mm_Schurter_0031_8201_Horizontal_Open +Fuseholder horizontal open, 5x20mm, 500V, 16A, Schurter 0031.8201, https://us.schurter.com/bundles/snceschurter/epim/_ProdPool_/newDS/en/typ_OGN.pdf +Fuseholder horizontal open 5x20 Schurter 0031.8201 +0 +2 +2 +Fuse +Fuseholder_Cylinder-5x20mm_Schurter_FAB_0031-355x_Horizontal_Closed +Fuseholder 5x20mm horizontal Shurter model FAB, Suitable for order numbers 0031.3551 and 0031.3558 (https://www.schurter.com/bundles/snceschurter/epim/_ProdPool_/newDS/en/typ_FAB.pdf) +Fuseholder 5x20mm closed horizontal +0 +2 +2 +Fuse +Fuseholder_Cylinder-5x20mm_Schurter_FPG4_Vertical_Closed +Shock-Safe Fuseholder, 5 x 20 mm, Slotted Cap/Fingergrip, vertical, IEC 60335-1; 250VAC/10A VDE; 500V/16A UL/CSA (https://us.schurter.com/bundles/snceschurter/epim/_ProdPool_/newDS/en/typ_FPG4.pdf) +fuse holder vertical 5x20mm +0 +4 +2 +Fuse +Fuseholder_Cylinder-5x20mm_Schurter_FUP_0031.2510_Horizontal_Closed +Shock-Safe closed Fuseholder, Schurter FUP Series, 5.0 x 20mm, Slotted Cap, horizontal, 500 VAC 4W/16A (VDE), 600V 30A (UL/CSA), order numbers: 0031.2510 (0031.2500 + 0031.2323), http://www.schurter.ch/bundles/snceschurter/epim/_ProdPool_/newDS/en/typ_FUP.pdf +Fuseholder 5x20mm horizontal closed +0 +3 +2 +Fuse +Fuseholder_Cylinder-5x20mm_Schurter_OGN-SMD_Horizontal_Open +Fuseholder horizontal open, 5x20mm, 500V, 16A (https://us.schurter.com/bundles/snceschurter/epim/_ProdPool_/newDS/en/typ_OGN-SMD.pdf) +Fuseholder horizontal open 5x20 Schurter 0031.8221 +0 +2 +2 +Fuse +Fuseholder_Cylinder-5x20mm_Stelvio-Kontek_PTF78_Horizontal_Open +https://www.tme.eu/en/Document/3b48dbe2b9714a62652c97b08fcd464b/PTF78.pdf +Fuseholder horizontal open 5x20 Stelvio-Kontek PTF/78 +0 +2 +2 +Fuse +Fuseholder_Cylinder-5x20mm_Wuerth_696103101002-SMD_Horizontal_Open +Fuseholder horizontal open 5x20mm 250V 10A Würth 696103101002 +Fuseholder horizontal open 5x20mm 250V 10A +0 +2 +2 +Fuse +Fuseholder_Cylinder-6.3x32mm_Schurter_0031-8002_Horizontal_Open +Fuseholder, horizontal, open, 6.3x32, Schurter, 0031.8002, https://www.schurter.com/en/datasheet/typ_OG__Holder__6.3x32.pdf +Fuseholder horizontal open 6.3x32 Schurter 0031.8002 +0 +2 +2 +Fuse +Fuseholder_Cylinder-6.3x32mm_Schurter_FUP_0031.2520_Horizontal_Closed +Shock-Safe closed Fuseholder, Schurter FUP Series, 6.3 x 32 mm, Slotted Cap, horizontal, 500 VAC 4W/16A (VDE), 600V 30A (UL/CSA), order numbers: 0031.2520 (0031.2500 + 0031.2321), http://www.schurter.ch/bundles/snceschurter/epim/_ProdPool_/newDS/en/typ_FUP.pdf +Fuseholder 6.3x32mm horizontal closed +0 +3 +2 +Fuse +Fuseholder_Keystone_3555-2 +Maxi APX ATX Automotive Blade Fuse Clip Holder https://www.keyelco.com/userAssets/file/M65p40.pdf +Maxi APX ATX Automotive Blade Fuse Clip Holder +0 +4 +2 +Fuse +Fuseholder_Littelfuse_100_series_5x20mm +Littelfuse clips, https://www.littelfuse.com/~/media/electronics/datasheets/fuse_clips/littelfuse_fuse_clip_100_445_030_520_datasheet.pdf.pdf +Fuseholder clips +0 +4 +2 +Fuse +Fuseholder_Littelfuse_100_series_5x25mm +Littelfuse clips, https://www.littelfuse.com/~/media/electronics/datasheets/fuse_clips/littelfuse_fuse_clip_100_445_030_520_datasheet.pdf.pdf +Fuseholder clips +0 +4 +2 +Fuse +Fuseholder_Littelfuse_100_series_5x30mm +Littelfuse clips, https://www.littelfuse.com/~/media/electronics/datasheets/fuse_clips/littelfuse_fuse_clip_100_445_030_520_datasheet.pdf.pdf +Fuseholder clips +0 +4 +2 +Fuse +Fuseholder_Littelfuse_445_030_series_5x20mm +Littelfuse clips, https://www.littelfuse.com/~/media/electronics/datasheets/fuse_clips/littelfuse_fuse_clip_100_445_030_520_datasheet.pdf.pdf +Fuseholder clips +0 +4 +2 +Fuse +Fuseholder_Littelfuse_445_030_series_5x25mm +Littelfuse clips, https://www.littelfuse.com/~/media/electronics/datasheets/fuse_clips/littelfuse_fuse_clip_100_445_030_520_datasheet.pdf.pdf +Fuseholder clips +0 +4 +2 +Fuse +Fuseholder_Littelfuse_445_030_series_5x30mm +Littelfuse clips, https://www.littelfuse.com/~/media/electronics/datasheets/fuse_clips/littelfuse_fuse_clip_100_445_030_520_datasheet.pdf.pdf +Fuseholder clips +0 +4 +2 +Fuse +Fuseholder_Littelfuse_Nano2_154x +Littelfuse NANO2 holder, https://www.littelfuse.com/~/media/electronics/datasheets/fuses/littelfuse_fuse_154_154t_154l_154tl_datasheet.pdf.pdf +SMD Nano2 holder +0 +2 +2 +Fuse +Fuseholder_Littelfuse_Nano2_157x +Littelfuse NANO2 holder, https://www.littelfuse.com/~/media/electronics/datasheets/fuses/littelfuse_fuse_157_datasheet.pdf.pdf +SMD Nano2 holder +0 +2 +2 +Fuse +Fuseholder_TR5_Littelfuse_No560_No460 +Fuse, Fuseholder, TR5, Littelfuse/Wickmann, No. 460, No560, https://www.littelfuse.com/~/media/electronics/datasheets/fuse_holders/littelfuse_fuse_holder_559_560_datasheet.pdf.pdf +Fuse Fuseholder TR5 Littelfuse/Wickmann No. 460 No560 +0 +2 +2 +Heatsink +Heatsink_35x26mm_1xFixation3mm_Fischer-SK486-35 +Heatsink, 35mm x 26mm, 1x Fixation 3mm, Fischer SK486-35 +heatsink +0 +1 +1 +Heatsink +Heatsink_38x38mm_SpringFixation +Heatsink, 38x38mm, Spring Fixation, diagonal, +heatsink +0 +4 +1 +Heatsink +Heatsink_62x40mm_2xFixation3mm +Heatsink, 62 x 40mm, 2x 3mm Drills, +heatsink +0 +2 +1 +Heatsink +Heatsink_125x35x50mm_3xFixationM3 +Heatsink, 125x35x50mm, 3 fixation holes 3.2mm +heatsink +0 +0 +0 +Heatsink +Heatsink_AAVID_573300D00010G_TO-263 +Heatsink, 12.70mm x 26.16mm x 10.16, SMD, 18K/W, TO-263, D2 Pak, https://www.shopaavid.com/Product/573300D00000G +Heatsink AAVID TO-263 D2 Pak +0 +2 +1 +Heatsink +Heatsink_AAVID_576802B03900G +Heatsink, 14.48x12.7x19.05mm, TO-220/ TO-262, https://www.boydcorp.com/aavid-datasheets/Board-Level-Cooling-Plug-In-5768.pdf +heatsink +0 +1 +1 +Heatsink +Heatsink_AAVID_590302B03600G +Heatsink, 25.4x25.4x42.54mm, TO-220, https://www.boydcorp.com/aavid-datasheets/Board-Level-Cooling-Channel-5903.pdf +heatsink +0 +2 +2 +Heatsink +Heatsink_AAVID_TV5G_TO220_Horizontal +Heatsink TV5G TO-220 Horizontal, https://www.shopaavid.com/Product/TV-5G +Heatsink TV5G TO-220 Horizontal +0 +0 +0 +Heatsink +Heatsink_Fischer_FK224xx2201_25x8.3mm +25x8.3mm Heatsink, 18K/W, TO-220, https://www.fischerelektronik.de/web_fischer/en_GB/$catalogue/fischerData/PR/FK224_220_1_/datasheet.xhtml?branch=heatsinks +heatsink TO-220 +0 +2 +1 +Heatsink +Heatsink_Fischer_FK24413D2PAK_26x13mm +26x13 mm SMD heatsink for TO-252 TO-263 TO-268, https://www.fischerelektronik.de/pim/upload/fischerData/cadpdf/base/fk_244_13_d2_pak.pdf +heatsink TO-252 TO-263 TO-268 +0 +2 +1 +Heatsink +Heatsink_Fischer_FK24413DPAK_23x13mm +23x13 mm SMD heatsink for TO-252 TO-263 TO-268, https://www.fischerelektronik.de/pim/upload/fischerData/cadpdf/base/fk_244_13_d_pak.pdf +heatsink TO-252 TO-263 TO-268 +0 +2 +1 +Heatsink +Heatsink_Fischer_SK104-STC-STIC_35x13mm_2xDrill2.5mm +Heatsink, 35mm x 13mm, 2x Fixation 2,5mm Drill, Soldering, Fischer SK104-STC-STIC, +Heatsink fischer TO-220 +0 +2 +1 +Heatsink +Heatsink_Fischer_SK104-STCB_35x13mm__2xDrill3.5mm_ScrewM3 +Heatsink, 35mm x 13mm, 2x Fixation 2,5mm Drill, Soldering, Fischer SK104-STC-STIC, +Heatsink fischer TO-220 +0 +2 +1 +Heatsink +Heatsink_Fischer_SK129-STS_42x25mm_2xDrill2.5mm +Heatsink, Fischer SK129 +heatsink fischer +0 +2 +1 +Heatsink +Heatsink_SheetType_50x7mm_2Fixations +Heatsink, Sheet type, 50x7mm, 2 fixations (solder), +Heatsink sheet +0 +2 +1 +Heatsink +Heatsink_Stonecold_HS-130_30x12mm_2xFixation2.5mm +Heatsink, StoneCold HS, https://www.tme.eu/Document/da20d9b42617e16f6777c881dc9e3434/hs-130.pdf +heatsink +0 +2 +1 +Heatsink +Heatsink_Stonecold_HS-132_32x14mm_2xFixation1.5mm +Heatsink, StoneCold HS +heatsink +0 +2 +1 +Heatsink +Heatsink_Stonecold_HS-S01_13.21x6.35mm +Heatsink, Stonecold, HS, https://www.tme.eu/Document/f7f93f538b934e0b08e09747396fb95f/hs-s.pdf +heatsink +0 +0 +0 +Heatsink +Heatsink_Stonecold_HS-S02_13.21x9.53mm +Heatsink, Stonecold, HS, https://www.tme.eu/Document/f7f93f538b934e0b08e09747396fb95f/hs-s.pdf +heatsink +0 +0 +0 +Heatsink +Heatsink_Stonecold_HS-S03_13.21x12.7mm +Heatsink, Stonecold, HS, https://www.tme.eu/Document/f7f93f538b934e0b08e09747396fb95f/hs-s.pdf +heatsink +0 +0 +0 +Inductor_SMD +L_6.3x6.3_H3 +Choke, SMD, 6.3x6.3mm 3mm height +Choke SMD +0 +2 +2 +Inductor_SMD +L_7.3x7.3_H3.5 +Choke, SMD, 7.3x7.3mm 3.5mm height +Choke SMD +0 +2 +2 +Inductor_SMD +L_7.3x7.3_H4.5 +Choke, SMD, 7.3x7.3mm 4.5mm height +Choke SMD +0 +2 +2 +Inductor_SMD +L_10.4x10.4_H4.8 +Choke, SMD, 10.4x10.4mm 4.8mm height +Choke SMD +0 +2 +2 +Inductor_SMD +L_12x12mm_H4.5mm +Choke, SMD, 12x12mm 4.5mm height +Choke SMD +0 +2 +2 +Inductor_SMD +L_12x12mm_H6mm +Choke, SMD, 12x12mm 6mm height +Choke SMD +0 +2 +2 +Inductor_SMD +L_12x12mm_H8mm +Choke, SMD, 12x12mm 8mm height +Choke SMD +0 +2 +2 +Inductor_SMD +L_0201_0603Metric +Inductor SMD 0201 (0603 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://www.vishay.com/docs/20052/crcw0201e3.pdf), generated with kicad-footprint-generator +inductor +0 +4 +2 +Inductor_SMD +L_0201_0603Metric_Pad0.64x0.40mm_HandSolder +Inductor SMD 0201 (0603 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://www.vishay.com/docs/20052/crcw0201e3.pdf), generated with kicad-footprint-generator +inductor handsolder +0 +4 +2 +Inductor_SMD +L_0402_1005Metric +Inductor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +inductor +0 +2 +2 +Inductor_SMD +L_0402_1005Metric_Pad0.77x0.64mm_HandSolder +Inductor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +inductor handsolder +0 +2 +2 +Inductor_SMD +L_0603_1608Metric +Inductor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +inductor +0 +2 +2 +Inductor_SMD +L_0603_1608Metric_Pad1.05x0.95mm_HandSolder +Inductor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +inductor handsolder +0 +2 +2 +Inductor_SMD +L_0805_2012Metric +Inductor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 80, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator +inductor +0 +2 +2 +Inductor_SMD +L_0805_2012Metric_Pad1.05x1.20mm_HandSolder +Inductor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 80, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator +inductor handsolder +0 +2 +2 +Inductor_SMD +L_0805_2012Metric_Pad1.15x1.40mm_HandSolder +Inductor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator +inductor handsolder +0 +2 +2 +Inductor_SMD +L_01005_0402Metric +Inductor SMD 01005 (0402 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.vishay.com/docs/20056/crcw01005e3.pdf), generated with kicad-footprint-generator +inductor +0 +4 +2 +Inductor_SMD +L_01005_0402Metric_Pad0.57x0.30mm_HandSolder +Inductor SMD 01005 (0402 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: http://www.vishay.com/docs/20056/crcw01005e3.pdf), generated with kicad-footprint-generator +inductor handsolder +0 +4 +2 +Inductor_SMD +L_1008_2520Metric +Inductor SMD 1008 (2520 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://ecsxtal.com/store/pdf/ECS-MPI2520-SMD-POWER-INDUCTOR.pdf), generated with kicad-footprint-generator +inductor +0 +2 +2 +Inductor_SMD +L_1008_2520Metric_Pad1.43x2.20mm_HandSolder +Inductor SMD 1008 (2520 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://ecsxtal.com/store/pdf/ECS-MPI2520-SMD-POWER-INDUCTOR.pdf), generated with kicad-footprint-generator +inductor handsolder +0 +2 +2 +Inductor_SMD +L_1206_3216Metric +Inductor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 80, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator +inductor +0 +2 +2 +Inductor_SMD +L_1206_3216Metric_Pad1.22x1.90mm_HandSolder +Inductor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 80, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator +inductor handsolder +0 +2 +2 +Inductor_SMD +L_1206_3216Metric_Pad1.42x1.75mm_HandSolder +Inductor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +inductor handsolder +0 +2 +2 +Inductor_SMD +L_1210_3225Metric +Inductor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +inductor +0 +2 +2 +Inductor_SMD +L_1210_3225Metric_Pad1.42x2.65mm_HandSolder +Inductor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +inductor handsolder +0 +2 +2 +Inductor_SMD +L_1806_4516Metric +Inductor SMD 1806 (4516 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 80, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator +inductor +0 +2 +2 +Inductor_SMD +L_1806_4516Metric_Pad1.45x1.90mm_HandSolder +Inductor SMD 1806 (4516 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 80, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator +inductor handsolder +0 +2 +2 +Inductor_SMD +L_1812_4532Metric +Inductor SMD 1812 (4532 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://www.nikhef.nl/pub/departments/mt/projects/detectorR_D/dtddice/ERJ2G.pdf), generated with kicad-footprint-generator +inductor +0 +2 +2 +Inductor_SMD +L_1812_4532Metric_Pad1.30x3.40mm_HandSolder +Inductor SMD 1812 (4532 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://www.nikhef.nl/pub/departments/mt/projects/detectorR_D/dtddice/ERJ2G.pdf), generated with kicad-footprint-generator +inductor handsolder +0 +2 +2 +Inductor_SMD +L_2010_5025Metric +Inductor SMD 2010 (5025 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +inductor +0 +2 +2 +Inductor_SMD +L_2010_5025Metric_Pad1.52x2.65mm_HandSolder +Inductor SMD 2010 (5025 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +inductor handsolder +0 +2 +2 +Inductor_SMD +L_2512_6332Metric +Inductor SMD 2512 (6332 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +inductor +0 +2 +2 +Inductor_SMD +L_2512_6332Metric_Pad1.52x3.35mm_HandSolder +Inductor SMD 2512 (6332 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +inductor handsolder +0 +2 +2 +Inductor_SMD +L_AVX_LMLP07A7 +Inductor, AVX Kyocera, LMLP Series, style D, 6.6mmx7.3mm, 3.0mm height. (Script generated with StandardBox.py) (https://datasheets.avx.com/LMLPD.pdf) +Inductor LMLP +0 +2 +2 +Inductor_SMD +L_Abracon_ASPI-0630LR +smd shielded power inductor https://abracon.com/Magnetics/power/ASPI-0630LR.pdf +inductor abracon smd shielded +0 +2 +2 +Inductor_SMD +L_Abracon_ASPI-3012S +smd shielded power inductor http://www.abracon.com/Magnetics/power/ASPI-3012S.pdf +inductor abracon smd shielded +0 +2 +2 +Inductor_SMD +L_Abracon_ASPI-4030S +smd shielded power inductor 4x4x3mm, Abracon ASPI-4030S, https://abracon.com/Magnetics/power/ASPI-4030S.pdf +inductor abracon smd shielded +0 +2 +2 +Inductor_SMD +L_Bourns-SRN1060 +Bourns SRN1060 series SMD inductor https://www.bourns.com/docs/Product-Datasheets/SRN1060.pdf +Bourns SRN1060 SMD inductor +0 +2 +2 +Inductor_SMD +L_Bourns-SRN4018 +Bourns SRN4018 series SMD inductor, https://www.bourns.com/docs/Product-Datasheets/SRN4018.pdf +Bourns SRN4018 SMD inductor +0 +2 +2 +Inductor_SMD +L_Bourns-SRN6028 +Bourns SRN6028 series SMD inductor +Bourns SRN6028 SMD inductor +0 +2 +2 +Inductor_SMD +L_Bourns-SRN8040_8x8.15mm +Bourns SRN8040 series SMD inductor 8x8.15mm, https://www.bourns.com/docs/Product-Datasheets/SRN8040.pdf +Bourns SRN8040 SMD inductor +0 +2 +2 +Inductor_SMD +L_Bourns-SRR1005 +Bourns SRR1005 series SMD inductor +Bourns SRR1005 SMD inductor +0 +2 +2 +Inductor_SMD +L_Bourns-SRU1028_10.0x10.0mm +Bourns SRU1028 series SMD inductor, https://www.bourns.com/docs/Product-Datasheets/SRU1028.pdf +Bourns SRU1028 SMD inductor +0 +2 +2 +Inductor_SMD +L_Bourns-SRU8028_8.0x8.0mm +Bourns SRU8028 series SMD inductor +Bourns SRU8028 SMD inductor +0 +2 +2 +Inductor_SMD +L_Bourns-SRU8043 +Bourns SRU8043 series SMD inductor +Bourns SRU8043 SMD inductor +0 +2 +2 +Inductor_SMD +L_Bourns_SDR1806 +https://www.bourns.com/docs/Product-Datasheets/SDR1806.pdf +Bourns SDR1806 +0 +2 +2 +Inductor_SMD +L_Bourns_SRF1260 +Inductor, Bourns, SRF1260, 12.5mmx12.5mm (Script generated with StandardBox.py) (https://www.bourns.com/docs/Product-Datasheets/SRF1260.pdf) +Inductor Bourns_SRF1260 +0 +4 +4 +Inductor_SMD +L_Bourns_SRN6045TA +http://www.bourns.com/docs/product-datasheets/srn6045ta.pdf +Semi-shielded Power Inductor +0 +2 +2 +Inductor_SMD +L_Bourns_SRN8040TA +https://www.bourns.com/docs/product-datasheets/srn8040ta.pdf +Inductor +0 +2 +2 +Inductor_SMD +L_Bourns_SRP1038C_10.0x10.0mm +Bourns SRP1038C series SMD inductor http://www.bourns.com/docs/Product-Datasheets/SRP1038C.pdf +Bourns SRP1038C SMD inductor +0 +2 +2 +Inductor_SMD +L_Bourns_SRP1245A +Bourns SRP1245A series SMD inductor http://www.bourns.com/docs/Product-Datasheets/SRP1245A.pdf +Bourns SRP1245A SMD inductor +0 +2 +2 +Inductor_SMD +L_Bourns_SRP1770TA_16.9x16.9mm +Bourns SRP1770TA series SMD Inductor http://www.bourns.com/docs/Product-Datasheets/SRP1770TA.pdf +Bourns SRP1770TA series SMD Inductor +0 +2 +2 +Inductor_SMD +L_Bourns_SRP2313AA +Bourns SRR1260 series SMD inductor http://www.bourns.com/docs/product-datasheets/srp2313aa.pdf +Bourns SRR1260 SMD inductor +0 +4 +2 +Inductor_SMD +L_Bourns_SRP5030T +Inductor, Bourns, SRP5030T, 5.7mmx5.2mm (Script generated with StandardBox.py) (https://www.bourns.com/data/global/pdfs/SRP5030T.pdf) +Inductor Bourns_SRP5030T +0 +2 +2 +Inductor_SMD +L_Bourns_SRP7028A_7.3x6.6mm +Shielded Power Inductors (https://www.bourns.com/docs/product-datasheets/srp7028a.pdf) +Shielded Inductors Bourns SMD SRP7028A +0 +2 +2 +Inductor_SMD +L_Bourns_SRR1208_12.7x12.7mm +Bourns SRP1208 series SMD inductor https://www.bourns.com/pdfs/SRR1208.pdf +Bourns SRP1208 SMD inductor +0 +2 +2 +Inductor_SMD +L_Bourns_SRR1210A +Bourns SRR1210A series SMD inductor https://www.bourns.com/docs/Product-Datasheets/SRR1210A.pdf +Bourns SRR1210A SMD inductor +0 +2 +2 +Inductor_SMD +L_Bourns_SRR1260 +Bourns SRR1260 series SMD inductor http://www.bourns.com/docs/Product-Datasheets/SRR1260.pdf +Bourns SRR1260 SMD inductor +0 +2 +2 +Inductor_SMD +L_Bourns_SRU5016_5.2x5.2mm +Bourns SRU5016 series shielded SMD power inductor, 1.6mm height https://www.bourns.com/docs/product-datasheets/sru5016.pdf +Bourns SRU5016 SMD inductor +0 +4 +3 +Inductor_SMD +L_Cenker_CKCS3012 +Inductor, Cenker, CKCS3012, 3.0x3.0x1.3mm, https://www.ckcoil.com/file/upload/spae532/2023-07/11/202307110955366446.pdf +Inductor ckcs +0 +2 +2 +Inductor_SMD +L_Cenker_CKCS3015 +Inductor, Cenker, CKCS3015, 3.0x3.0x1.7mm, https://www.ckcoil.com/file/upload/spae532/2023-07/11/202307110955366446.pdf +Inductor ckcs +0 +2 +2 +Inductor_SMD +L_Cenker_CKCS4018 +Inductor, Cenker, CKCS4018, 4.0x4.0x1.8mm, https://www.ckcoil.com/file/upload/spae532/2023-07/11/202307110955366446.pdf +Inductor ckcs +0 +2 +2 +Inductor_SMD +L_Cenker_CKCS4020 +Inductor, Cenker, CKCS4020, 4.0x4.0x2.0mm, https://www.ckcoil.com/file/upload/spae532/2023-07/11/202307110955366446.pdf +Inductor ckcs +0 +2 +2 +Inductor_SMD +L_Cenker_CKCS4030 +Inductor, Cenker, CKCS4030, 4.0x4.0x3.0mm, https://www.ckcoil.com/file/upload/spae532/2023-07/11/202307110955366446.pdf +Inductor ckcs +0 +2 +2 +Inductor_SMD +L_Cenker_CKCS5020 +Inductor, Cenker, CKCS5020, 5.0x5.0x2.1mm, https://www.ckcoil.com/file/upload/spae532/2023-07/11/202307110955366446.pdf +Inductor ckcs +0 +2 +2 +Inductor_SMD +L_Cenker_CKCS5040 +Inductor, Cenker, CKCS5040, 5.0x5.0x4.0mm, https://www.ckcoil.com/file/upload/spae532/2023-07/11/202307110955366446.pdf +Inductor ckcs +0 +2 +2 +Inductor_SMD +L_Cenker_CKCS6020 +Inductor, Cenker, CKCS6020, 6.0x6.0x2.1mm, https://www.ckcoil.com/file/upload/spae532/2023-07/11/202307110955366446.pdf +Inductor ckcs +0 +2 +2 +Inductor_SMD +L_Cenker_CKCS6028 +Inductor, Cenker, CKCS6028, 6.0x6.0x3.0mm, https://www.ckcoil.com/file/upload/spae532/2023-07/11/202307110955366446.pdf +Inductor ckcs +0 +2 +2 +Inductor_SMD +L_Cenker_CKCS6045 +Inductor, Cenker, CKCS6045, 6.0x6.0x4.7mm, https://www.ckcoil.com/file/upload/spae532/2023-07/11/202307110955366446.pdf +Inductor ckcs +0 +2 +2 +Inductor_SMD +L_Cenker_CKCS8040 +Inductor, Cenker, CKCS8040, 8.0x8.0x4.2mm, https://www.ckcoil.com/file/upload/spae532/2023-07/11/202307110955366446.pdf +Inductor ckcs +0 +2 +2 +Inductor_SMD +L_Cenker_CKCS8060 +Inductor, Cenker, CKCS8060, 8.0x8.0x6.2mm, https://www.ckcoil.com/file/upload/spae532/2023-07/11/202307110955366446.pdf +Inductor ckcs +0 +2 +2 +Inductor_SMD +L_Cenker_CKCS8080 +Inductor, Cenker, CKCS8080, 8.0x8.0x8.0mm, https://www.ckcoil.com/file/upload/spae532/2023-07/11/202307110955366446.pdf +Inductor ckcs +0 +2 +2 +Inductor_SMD +L_Cenker_CKCS201610 +Inductor, Cenker, CKCS201610, 2.0x1.6x1.05mm, https://www.ckcoil.com/file/upload/spae532/2023-07/11/202307110955366446.pdf +Inductor ckcs +0 +2 +2 +Inductor_SMD +L_Cenker_CKCS252010 +Inductor, Cenker, CKCS252010, 2.5x2.0x1.05mm, https://www.ckcoil.com/file/upload/spae532/2023-07/11/202307110955366446.pdf +Inductor ckcs +0 +2 +2 +Inductor_SMD +L_Cenker_CKCS252012 +Inductor, Cenker, CKCS252012, 2.5x2.0x1.25mm, https://www.ckcoil.com/file/upload/spae532/2023-07/11/202307110955366446.pdf +Inductor ckcs +0 +2 +2 +Inductor_SMD +L_Changjiang_FNR3010S +Inductor, Changjiang, FNR3010S, 3.0x3.0x1.0mm, https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf +Inductor wirewound power shielded +0 +2 +2 +Inductor_SMD +L_Changjiang_FNR3012S +Inductor, Changjiang, FNR3012S, 3.0x3.0x1.2mm, https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf +Inductor wirewound power shielded +0 +2 +2 +Inductor_SMD +L_Changjiang_FNR3015S +Inductor, Changjiang, FNR3015S, 3.0x3.0x1.5mm, https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf +Inductor wirewound power shielded +0 +2 +2 +Inductor_SMD +L_Changjiang_FNR3021S +Inductor, Changjiang, FNR3021S, 3.0x3.0x2.35mm, https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf +Inductor wirewound power shielded +0 +2 +2 +Inductor_SMD +L_Changjiang_FNR4010S +Inductor, Changjiang, FNR4010S, 4.0x4.0x1.0mm, https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf +Inductor wirewound power shielded +0 +2 +2 +Inductor_SMD +L_Changjiang_FNR4012S +Inductor, Changjiang, FNR4012S, 4.0x4.0x1.2mm, https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf +Inductor wirewound power shielded +0 +2 +2 +Inductor_SMD +L_Changjiang_FNR4015S +Inductor, Changjiang, FNR4015S, 4.0x4.0x1.65mm, https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf +Inductor wirewound power shielded +0 +2 +2 +Inductor_SMD +L_Changjiang_FNR4018S +Inductor, Changjiang, FNR4018S, 4.0x4.0x1.8mm, https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf +Inductor wirewound power shielded +0 +2 +2 +Inductor_SMD +L_Changjiang_FNR4020S +Inductor, Changjiang, FNR4020S, 4.0x4.0x2.0mm, https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf +Inductor wirewound power shielded +0 +2 +2 +Inductor_SMD +L_Changjiang_FNR4026S +Inductor, Changjiang, FNR4026S, 4.0x4.0x2.6mm, https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf +Inductor wirewound power shielded +0 +2 +2 +Inductor_SMD +L_Changjiang_FNR4030S +Inductor, Changjiang, FNR4030S, 4.0x4.0x3.0mm, https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf +Inductor wirewound power shielded +0 +2 +2 +Inductor_SMD +L_Changjiang_FNR5012S +Inductor, Changjiang, FNR5012S, 5.0x5.0x1.2mm, https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf +Inductor wirewound power shielded +0 +2 +2 +Inductor_SMD +L_Changjiang_FNR5015S +Inductor, Changjiang, FNR5015S, 5.0x5.0x1.5mm, https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf +Inductor wirewound power shielded +0 +2 +2 +Inductor_SMD +L_Changjiang_FNR5020S +Inductor, Changjiang, FNR5020S, 5.0x5.0x2.0mm, https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf +Inductor wirewound power shielded +0 +2 +2 +Inductor_SMD +L_Changjiang_FNR5030S +Inductor, Changjiang, FNR5030S, 5.0x5.0x3.0mm, https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf +Inductor wirewound power shielded +0 +2 +2 +Inductor_SMD +L_Changjiang_FNR5040S +Inductor, Changjiang, FNR5040S, 5.0x5.0x4.0mm, https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf +Inductor wirewound power shielded +0 +2 +2 +Inductor_SMD +L_Changjiang_FNR5045S +Inductor, Changjiang, FNR5045S, 5.0x5.0x4.5mm, https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf +Inductor wirewound power shielded +0 +2 +2 +Inductor_SMD +L_Changjiang_FNR6020S +Inductor, Changjiang, FNR6020S, 6.0x6.0x2.0mm, https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf +Inductor wirewound power shielded +0 +2 +2 +Inductor_SMD +L_Changjiang_FNR6028S +Inductor, Changjiang, FNR6028S, 6.0x6.0x2.8mm, https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf +Inductor wirewound power shielded +0 +2 +2 +Inductor_SMD +L_Changjiang_FNR6040S +Inductor, Changjiang, FNR6040S, 6.0x6.0x4.0mm, https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf +Inductor wirewound power shielded +0 +2 +2 +Inductor_SMD +L_Changjiang_FNR6045S +Inductor, Changjiang, FNR6045S, 6.0x6.0x4.5mm, https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf +Inductor wirewound power shielded +0 +2 +2 +Inductor_SMD +L_Changjiang_FNR8040S +Inductor, Changjiang, FNR8040S, 8.0x8.0x4.0mm, https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf +Inductor wirewound power shielded +0 +2 +2 +Inductor_SMD +L_Changjiang_FNR8050S +Inductor, Changjiang, FNR8050S, 8.0x8.0x5.0mm, https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf +Inductor wirewound power shielded +0 +2 +2 +Inductor_SMD +L_Changjiang_FNR8065S +Inductor, Changjiang, FNR8065S, 8.0x8.0x6.5mm, https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf +Inductor wirewound power shielded +0 +2 +2 +Inductor_SMD +L_Changjiang_FNR252010S +Inductor, Changjiang, FNR252010S, 2.5x2.0x1.0mm, https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf +Inductor wirewound power shielded +0 +2 +2 +Inductor_SMD +L_Changjiang_FNR252012S +Inductor, Changjiang, FNR252012S, 2.5x2.0x1.2mm, https://datasheet.lcsc.com/lcsc/1806131217_cjiang-Changjiang-Microelectronics-Tech-FNR5040S3R3NT_C167960.pdf +Inductor wirewound power shielded +0 +2 +2 +Inductor_SMD +L_Chilisin_BMRA00040415 +Inductor, Chilisin, BMRA00040415, 4.6x4.1x1.5mm, https://www.chilisin.com/upload/media/product/power/file/BMRx_Series.pdf +Inductor bmrx mchi +0 +2 +2 +Inductor_SMD +L_Chilisin_BMRA00040420 +Inductor, Chilisin, BMRA00040420, 4.6x4.1x2.0mm, https://www.chilisin.com/upload/media/product/power/file/BMRx_Series.pdf +Inductor bmrx mchi +0 +2 +2 +Inductor_SMD +L_Chilisin_BMRA00050520 +Inductor, Chilisin, BMRA00050520, 5.7x5.4x1.8mm, https://www.chilisin.com/upload/media/product/power/file/BMRx_Series.pdf +Inductor bmrx mchi +0 +2 +2 +Inductor_SMD +L_Chilisin_BMRA00050530 +Inductor, Chilisin, BMRA00050530, 5.7x5.4x3.0mm, https://www.chilisin.com/upload/media/product/power/file/BMRx_Series.pdf +Inductor bmrx mchi +0 +2 +2 +Inductor_SMD +L_Chilisin_BMRB00050512 +Inductor, Chilisin, BMRB00050512, 5.7x5.4x1.2mm, https://www.chilisin.com/upload/media/product/power/file/BMRx_Series.pdf +Inductor bmrx mchi +0 +2 +2 +Inductor_SMD +L_Chilisin_BMRB00050518 +Inductor, Chilisin, BMRB00050518, 5.7x5.4x1.8mm, https://www.chilisin.com/upload/media/product/power/file/BMRx_Series.pdf +Inductor bmrx mchi +0 +2 +2 +Inductor_SMD +L_Chilisin_BMRB00050518-B +Inductor, Chilisin, BMRB00050518-B, 5.4x5.2x1.6mm, https://www.chilisin.com/upload/media/product/power/file/BMRx_Series.pdf +Inductor bmrx mchi +0 +2 +2 +Inductor_SMD +L_Chilisin_BMRB00060612 +Inductor, Chilisin, BMRB00060612, 7.3x6.6x1.2mm, https://www.chilisin.com/upload/media/product/power/file/BMRx_Series.pdf +Inductor bmrx mchi +0 +2 +2 +Inductor_SMD +L_Chilisin_BMRB00060618 +Inductor, Chilisin, BMRB00060618, 7.3x6.6x1.6mm, https://www.chilisin.com/upload/media/product/power/file/BMRx_Series.pdf +Inductor bmrx mchi +0 +2 +2 +Inductor_SMD +L_Chilisin_BMRB00060624 +Inductor, Chilisin, BMRB00060624, 7.3x6.6x2.4mm, https://www.chilisin.com/upload/media/product/power/file/BMRx_Series.pdf +Inductor bmrx mchi +0 +2 +2 +Inductor_SMD +L_Chilisin_BMRB00060650 +Inductor, Chilisin, BMRB00060650, 7.3x6.6x5.0mm, https://www.chilisin.com/upload/media/product/power/file/BMRx_Series.pdf +Inductor bmrx mchi +0 +2 +2 +Inductor_SMD +L_Chilisin_BMRF00101040 +Inductor, Chilisin, BMRF00101040, 11.6x10.1x4.0mm, https://www.chilisin.com/upload/media/product/power/file/BMRx_Series.pdf +Inductor bmrx mchi +0 +2 +2 +Inductor_SMD +L_Chilisin_BMRF00131350 +Inductor, Chilisin, BMRF00131350, 13.8x12.6x5.0mm, https://www.chilisin.com/upload/media/product/power/file/BMRx_Series.pdf +Inductor bmrx mchi +0 +2 +2 +Inductor_SMD +L_Chilisin_BMRF00131360 +Inductor, Chilisin, BMRF00131360, 13.8x12.6x5.8mm, https://www.chilisin.com/upload/media/product/power/file/BMRx_Series.pdf +Inductor bmrx mchi +0 +2 +2 +Inductor_SMD +L_Chilisin_BMRF00171770 +Inductor, Chilisin, BMRF00171770, 17.15x17.15x6.8mm, https://www.chilisin.com/upload/media/product/power/file/BMRx_Series.pdf +Inductor bmrx mchi +0 +2 +2 +Inductor_SMD +L_Chilisin_BMRG00101030 +Inductor, Chilisin, BMRG00101030, 11.6x10.1x3.0mm, https://www.chilisin.com/upload/media/product/power/file/BMRx_Series.pdf +Inductor bmrx mchi +0 +2 +2 +Inductor_SMD +L_Chilisin_BMRG00131360 +Inductor, Chilisin, BMRG00131360, 13.8x12.6x6.0mm, https://www.chilisin.com/upload/media/product/power/file/BMRx_Series.pdf +Inductor bmrx mchi +0 +2 +2 +Inductor_SMD +L_Chilisin_BMRx00040412 +Inductor, Chilisin, BMRx00040412, 4.6x4.1x1.2mm, https://www.chilisin.com/upload/media/product/power/file/BMRx_Series.pdf +Inductor bmrx mchi +0 +2 +2 +Inductor_SMD +L_Chilisin_BMRx00050512-B +Inductor, Chilisin, BMRx00050512-B, 5.4x5.2x1.2mm, https://www.chilisin.com/upload/media/product/power/file/BMRx_Series.pdf +Inductor bmrx mchi +0 +2 +2 +Inductor_SMD +L_Chilisin_BMRx00050515 +Inductor, Chilisin, BMRx00050515, 5.7x5.4x1.5mm, https://www.chilisin.com/upload/media/product/power/file/BMRx_Series.pdf +Inductor bmrx mchi +0 +2 +2 +Inductor_SMD +L_Chilisin_BMRx00060615 +Inductor, Chilisin, BMRx00060615, 7.3x6.6x1.3mm, https://www.chilisin.com/upload/media/product/power/file/BMRx_Series.pdf +Inductor bmrx mchi +0 +2 +2 +Inductor_SMD +L_Chilisin_BMRx00060630 +Inductor, Chilisin, BMRx00060630, 7.3x6.6x3.0mm, https://www.chilisin.com/upload/media/product/power/file/BMRx_Series.pdf +Inductor bmrx mchi +0 +2 +2 +Inductor_SMD +L_Coilcraft_LPS3010 +Shielded Power Inductor SMD 3x3x1mm, Coilcraft LPS3010, https://www.coilcraft.com/pdfs/lps3010.pdf +inductor low profile +0 +2 +2 +Inductor_SMD +L_Coilcraft_LPS3314 +SMD Inductor, 3.3x3.3x1.4mm, Coilcraft LPS3314, https://www.coilcraft.com/pdfs/lps3314.pdf +L Coilcraft LPS3314 +0 +2 +2 +Inductor_SMD +L_Coilcraft_LPS4018 +SMD Inductor Coilcraft LPS4018 https://www.coilcraft.com/pdfs/lps4018.pdf +L Coilcraft LPS4018 +0 +2 +2 +Inductor_SMD +L_Coilcraft_LPS5030 +Shielded Power Inductor SMD, Coilcraft LPS5030, https://www.coilcraft.com/pdfs/lps5030.pdf, StepUp generated footprint +inductor +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL1010-XXX +Inductor, Coilcraft, XAL1010-XXX, 10.5x11.8x10.0mm, https://www.coilcraft.com/getmedia/dd74e670-e705-456a-9a69-585fe02eaf3c/xal1010.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL1030-XXX +Inductor, Coilcraft, XAL1030-XXX, 10.5x11.8x3.1mm, https://www.coilcraft.com/getmedia/7b108457-7731-456d-9256-ca72f2e1a551/xal1030.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL1060-XXX +Inductor, Coilcraft, XAL1060-XXX, 10.5x11.8x6.0mm, https://www.coilcraft.com/getmedia/8909f858-b441-4d60-acff-8b8ca36f9ede/xal1060.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL1350-XXX +Inductor, Coilcraft, XAL1350-XXX, 13.2x14.2x5.0mm, https://www.coilcraft.com/getmedia/dc536f86-3a3b-454f-950e-8e153260e61c/xal1350.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL1510-103 +Inductor, Coilcraft, XAL1510-103, 15.4x16.4x10.0mm, https://www.coilcraft.com/getmedia/cd1cef27-13f0-4568-8894-f7311475209b/xal1510.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL1510-153 +Inductor, Coilcraft, XAL1510-153, 15.4x16.4x10.0mm, https://www.coilcraft.com/getmedia/cd1cef27-13f0-4568-8894-f7311475209b/xal1510.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL1510-223 +Inductor, Coilcraft, XAL1510-223, 15.4x16.4x10.0mm, https://www.coilcraft.com/getmedia/cd1cef27-13f0-4568-8894-f7311475209b/xal1510.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL1510-333 +Inductor, Coilcraft, XAL1510-333, 15.4x16.4x11.0mm, https://www.coilcraft.com/getmedia/cd1cef27-13f0-4568-8894-f7311475209b/xal1510.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL1510-472 +Inductor, Coilcraft, XAL1510-472, 15.4x16.4x10.0mm, https://www.coilcraft.com/getmedia/cd1cef27-13f0-4568-8894-f7311475209b/xal1510.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL1510-682 +Inductor, Coilcraft, XAL1510-682, 15.4x16.4x10.0mm, https://www.coilcraft.com/getmedia/cd1cef27-13f0-4568-8894-f7311475209b/xal1510.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL1510-822 +Inductor, Coilcraft, XAL1510-822, 15.4x16.4x10.0mm, https://www.coilcraft.com/getmedia/cd1cef27-13f0-4568-8894-f7311475209b/xal1510.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL1513-153 +Inductor, Coilcraft, XAL1513-153, 15.4x16.4x13.0mm, https://www.coilcraft.com/getmedia/129ad6f3-0445-47fd-a0b3-edeb49177c17/xal1513.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL1580-102 +Inductor, Coilcraft, XAL1580-102, 15.4x16.4x8.2mm, https://www.coilcraft.com/getmedia/7fdfd306-5217-4ddc-b6b7-a2659ceeb6e3/xal1580.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL1580-132 +Inductor, Coilcraft, XAL1580-132, 15.4x16.4x8.0mm, https://www.coilcraft.com/getmedia/7fdfd306-5217-4ddc-b6b7-a2659ceeb6e3/xal1580.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL1580-182 +Inductor, Coilcraft, XAL1580-182, 15.4x16.4x8.0mm, https://www.coilcraft.com/getmedia/7fdfd306-5217-4ddc-b6b7-a2659ceeb6e3/xal1580.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL1580-202 +Inductor, Coilcraft, XAL1580-202, 15.4x16.4x8.0mm, https://www.coilcraft.com/getmedia/7fdfd306-5217-4ddc-b6b7-a2659ceeb6e3/xal1580.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL1580-302 +Inductor, Coilcraft, XAL1580-302, 15.4x16.4x8.0mm, https://www.coilcraft.com/getmedia/7fdfd306-5217-4ddc-b6b7-a2659ceeb6e3/xal1580.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL1580-401 +Inductor, Coilcraft, XAL1580-401, 15.4x16.4x8.2mm, https://www.coilcraft.com/getmedia/7fdfd306-5217-4ddc-b6b7-a2659ceeb6e3/xal1580.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL1580-452 +Inductor, Coilcraft, XAL1580-452, 15.4x16.4x8.0mm, https://www.coilcraft.com/getmedia/7fdfd306-5217-4ddc-b6b7-a2659ceeb6e3/xal1580.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL1580-532 +Inductor, Coilcraft, XAL1580-532, 15.4x16.4x8.0mm, https://www.coilcraft.com/getmedia/7fdfd306-5217-4ddc-b6b7-a2659ceeb6e3/xal1580.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL1580-612 +Inductor, Coilcraft, XAL1580-612, 15.4x16.4x8.0mm, https://www.coilcraft.com/getmedia/7fdfd306-5217-4ddc-b6b7-a2659ceeb6e3/xal1580.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL1580-741 +Inductor, Coilcraft, XAL1580-741, 15.4x16.4x8.2mm, https://www.coilcraft.com/getmedia/7fdfd306-5217-4ddc-b6b7-a2659ceeb6e3/xal1580.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL4020-XXX +Inductor, Coilcraft, XAL4020-XXX, 4.3x4.3x2.1mm, https://www.coilcraft.com/getmedia/6adcb47d-8b55-416c-976e-1e22e0d2848c/xal4000.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL4030-XXX +Inductor, Coilcraft, XAL4030-XXX, 4.3x4.3x3.1mm, https://www.coilcraft.com/getmedia/6adcb47d-8b55-416c-976e-1e22e0d2848c/xal4000.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL4040-XXX +Inductor, Coilcraft, XAL4040-XXX, 4.3x4.3x4.1mm, https://www.coilcraft.com/getmedia/6adcb47d-8b55-416c-976e-1e22e0d2848c/xal4000.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL5020-XXX +Inductor, Coilcraft, XAL5020-XXX, 5.48x5.68x2.0mm, https://www.coilcraft.com/getmedia/1941eff1-c018-493c-8cd6-d88d2edf5029/xal5020.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL5030-XXX +Inductor, Coilcraft, XAL5030-XXX, 5.48x5.68x3.1mm, https://www.coilcraft.com/getmedia/49bc46c8-4b2c-45b9-9b6c-2eaa235ea698/xal50xx.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL5050-XXX +Inductor, Coilcraft, XAL5050-XXX, 5.48x5.68x5.1mm, https://www.coilcraft.com/getmedia/49bc46c8-4b2c-45b9-9b6c-2eaa235ea698/xal50xx.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL6020-XXX +Inductor, Coilcraft, XAL6020-XXX, 6.56x6.76x2.1mm, https://www.coilcraft.com/getmedia/467ff589-8942-4e57-92d0-5bef6e04ce09/xal6020.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL6030-XXX +Inductor, Coilcraft, XAL6030-XXX, 6.56x6.76x3.1mm, https://www.coilcraft.com/getmedia/ea51f14b-7f32-4dc6-8dfe-d4b70549040f/xal60xx.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL6060-XXX +Inductor, Coilcraft, XAL6060-XXX, 6.56x6.76x6.1mm, https://www.coilcraft.com/getmedia/ea51f14b-7f32-4dc6-8dfe-d4b70549040f/xal60xx.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL7020-102 +Inductor, Coilcraft, XAL7020-102, 8.0x8.0x2.0mm, https://www.coilcraft.com/getmedia/0197e98c-67f7-4375-9e38-14d7376a46f3/xal7020.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL7020-122 +Inductor, Coilcraft, XAL7020-122, 8.0x8.0x2.0mm, https://www.coilcraft.com/getmedia/0197e98c-67f7-4375-9e38-14d7376a46f3/xal7020.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL7020-151 +Inductor, Coilcraft, XAL7020-151, 8.0x8.0x2.05mm, https://www.coilcraft.com/getmedia/0197e98c-67f7-4375-9e38-14d7376a46f3/xal7020.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL7020-152 +Inductor, Coilcraft, XAL7020-152, 8.0x8.0x2.0mm, https://www.coilcraft.com/getmedia/0197e98c-67f7-4375-9e38-14d7376a46f3/xal7020.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL7020-222 +Inductor, Coilcraft, XAL7020-222, 8.0x8.0x2.0mm, https://www.coilcraft.com/getmedia/0197e98c-67f7-4375-9e38-14d7376a46f3/xal7020.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL7020-271 +Inductor, Coilcraft, XAL7020-271, 8.0x8.0x2.05mm, https://www.coilcraft.com/getmedia/0197e98c-67f7-4375-9e38-14d7376a46f3/xal7020.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL7020-331 +Inductor, Coilcraft, XAL7020-331, 8.0x8.0x2.0mm, https://www.coilcraft.com/getmedia/0197e98c-67f7-4375-9e38-14d7376a46f3/xal7020.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL7020-471 +Inductor, Coilcraft, XAL7020-471, 8.0x8.0x2.0mm, https://www.coilcraft.com/getmedia/0197e98c-67f7-4375-9e38-14d7376a46f3/xal7020.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL7020-681 +Inductor, Coilcraft, XAL7020-681, 8.0x8.0x2.0mm, https://www.coilcraft.com/getmedia/0197e98c-67f7-4375-9e38-14d7376a46f3/xal7020.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL7030-102 +Inductor, Coilcraft, XAL7030-102, 8.0x8.0x3.1mm, https://www.coilcraft.com/getmedia/0d05a05e-d55d-4a0c-911d-46bd73686633/xal7030.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL7030-103 +Inductor, Coilcraft, XAL7030-103, 8.0x8.0x3.1mm, https://www.coilcraft.com/getmedia/0d05a05e-d55d-4a0c-911d-46bd73686633/xal7030.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL7030-152 +Inductor, Coilcraft, XAL7030-152, 8.0x8.0x3.1mm, https://www.coilcraft.com/getmedia/0d05a05e-d55d-4a0c-911d-46bd73686633/xal7030.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL7030-161 +Inductor, Coilcraft, XAL7030-161, 8.0x8.0x3.1mm, https://www.coilcraft.com/getmedia/0d05a05e-d55d-4a0c-911d-46bd73686633/xal7030.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL7030-222 +Inductor, Coilcraft, XAL7030-222, 8.0x8.0x3.1mm, https://www.coilcraft.com/getmedia/0d05a05e-d55d-4a0c-911d-46bd73686633/xal7030.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL7030-272 +Inductor, Coilcraft, XAL7030-272, 8.0x8.0x3.1mm, https://www.coilcraft.com/getmedia/0d05a05e-d55d-4a0c-911d-46bd73686633/xal7030.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL7030-301 +Inductor, Coilcraft, XAL7030-301, 8.0x8.0x3.1mm, https://www.coilcraft.com/getmedia/0d05a05e-d55d-4a0c-911d-46bd73686633/xal7030.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL7030-332 +Inductor, Coilcraft, XAL7030-332, 8.0x8.0x3.1mm, https://www.coilcraft.com/getmedia/0d05a05e-d55d-4a0c-911d-46bd73686633/xal7030.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL7030-472 +Inductor, Coilcraft, XAL7030-472, 8.0x8.0x3.1mm, https://www.coilcraft.com/getmedia/0d05a05e-d55d-4a0c-911d-46bd73686633/xal7030.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL7030-562 +Inductor, Coilcraft, XAL7030-562, 8.0x8.0x3.1mm, https://www.coilcraft.com/getmedia/0d05a05e-d55d-4a0c-911d-46bd73686633/xal7030.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL7030-601 +Inductor, Coilcraft, XAL7030-601, 8.0x8.0x3.1mm, https://www.coilcraft.com/getmedia/0d05a05e-d55d-4a0c-911d-46bd73686633/xal7030.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL7030-682 +Inductor, Coilcraft, XAL7030-682, 8.0x8.0x3.1mm, https://www.coilcraft.com/getmedia/0d05a05e-d55d-4a0c-911d-46bd73686633/xal7030.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL7030-822 +Inductor, Coilcraft, XAL7030-822, 8.0x8.0x3.1mm, https://www.coilcraft.com/getmedia/0d05a05e-d55d-4a0c-911d-46bd73686633/xal7030.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL7050-XXX +Inductor, Coilcraft, XAL7050-XXX, 7.7x8.0x5.0mm, https://www.coilcraft.com/getmedia/13a991b3-4273-4be3-81ba-f3cf372b4691/xal7050.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL7070-XXX +Inductor, Coilcraft, XAL7070-XXX, 7.7x8.0x7.0mm, https://www.coilcraft.com/getmedia/1ba55433-bcc8-4838-9b21-382f497e12e0/xal7070.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL8050-223 +Inductor, Coilcraft, XAL8050-223, 8.3x8.8x5.0mm, https://www.coilcraft.com/getmedia/5885ede8-ea4f-464a-9dcb-18dbf143a845/xal8050.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XAL8080-XXX +Inductor, Coilcraft, XAL8080-XXX, 8.3x8.8x8.0mm, https://www.coilcraft.com/getmedia/345e50d6-a804-4ecb-9a92-5185221faf3e/xal8080.pdf +Inductor xal +0 +2 +2 +Inductor_SMD +L_Coilcraft_XFL2010 +Coilcraft XFL2010, Shielded power inductor, 0808, 1.9x2.0mm, https://www.coilcraft.com/getmedia/50382b97-998f-4b75-b5ee-4a93b0ac4411/xfl2010.pdf +miniature +0 +2 +2 +Inductor_SMD +L_Coilcraft_XxL4020 +L_Coilcraft_XxL4020 https://www.coilcraft.com/pdfs/xfl4020.pdf +L Coilcraft XxL4020 +0 +2 +2 +Inductor_SMD +L_Coilcraft_XxL4030 +L_Coilcraft_XxL4030 https://www.coilcraft.com/pdfs/xfl4030.pdf +L Coilcraft XxL4030 +0 +2 +2 +Inductor_SMD +L_Coilcraft_XxL4040 +L_Coilcraft_XxL4040 https://www.coilcraft.com/pdfs/xal4000.pdf +L Coilcraft XxL4040 +0 +2 +2 +Inductor_SMD +L_CommonModeChoke_Coilcraft_0603USB +Coilcraft 0603USB Series Common Mode Choke, https://www.coilcraft.com/pdfs/0603usb.pdf +surface mount common mode bead +0 +4 +4 +Inductor_SMD +L_CommonModeChoke_Coilcraft_0805USB +Coilcraft 0805USB Series Common Mode Choke, https://www.coilcraft.com/pdfs/0805usb.pdf +surface mount common mode bead +0 +4 +4 +Inductor_SMD +L_CommonModeChoke_Coilcraft_1812CAN +Coilcraft 1812CAN Series Common Mode Choke, https://www.coilcraft.com/pdfs/1812can.pdf +surface mount common mode bead +0 +4 +4 +Inductor_SMD +L_CommonModeChoke_Murata_DLW5BTMxxxSQ2x_5x5mm +Wire Wound Chip Common Mode Choke Coil SMD, Murata DLW5BTxxxSQ2x, https://www.murata.com/products/productdata/8796762701854/EFLC0020.pdf, manual footprint +inductor common mode choke +0 +4 +4 +Inductor_SMD +L_CommonModeChoke_TDK_ACM2520-2P +TDK ACM2520 common-mode filter, SMD, 2x2.5mm, height 1.2mm https://product.tdk.com/system/files/dam/doc/product/emc/emc/cmf_cmc/catalog/cmf_commercial_signal_acm2520_en.pdf +ACM2520 common-mode filter 4 pin +0 +4 +4 +Inductor_SMD +L_CommonModeChoke_TDK_ACM2520-3P +TDK ACM2520 common-mode filter, SMD, 2x2.5mm, height 1.2mm https://product.tdk.com/system/files/dam/doc/product/emc/emc/cmf_cmc/catalog/cmf_commercial_signal_acm2520_en.pdf +ACM2520 common-mode filter 6 pin +0 +6 +6 +Inductor_SMD +L_CommonModeChoke_TDK_ACM7060 +ACM7060 SMT Common Mode Filter, https://product.tdk.com/system/files/dam/doc/product/emc/emc/cmf_cmc/catalog/cmf_commercial_power_acm7060_en.pdf +SMT Common Mode Line Filter +0 +4 +4 +Inductor_SMD +L_CommonModeChoke_Wuerth_WE-SL5 +WE-SL5 SMT Common Mode Line Filter, 9.5x8.3mm, height 5mm, https://www.we-online.com/components/products/datasheet/744273222.pdf +SMT Common Mode Line Filter +0 +4 +4 +Inductor_SMD +L_CommonMode_Delevan_4222 +API Delevan, Surface Mount Common Mode Bead, 4222 4222R, http://www.delevan.com/seriesPDFs/4222.pdf +surface mount common mode bead +0 +4 +4 +Inductor_SMD +L_CommonMode_Wuerth_WE-SL2 +http://katalog.we-online.de/en/pbs/WE-SL2?sid=5fbec16187#vs_t1:c1_ct:1 +Wuerth WE-SL2 +0 +4 +4 +Inductor_SMD +L_CommonMode_Wurth_WE-CNSW-1206 +WE-CNSW SMT Common Mode Line Filter, https://www.we-online.com/components/products/datasheet/744232090.pdf +common mode choke 1206 cnsw +0 +4 +4 +Inductor_SMD +L_Eaton_MCL2012V1 +Inductor, Eaton, MCL2012V1, 2.0x1.2x0.9mm, https://eu.mouser.com/datasheet/2/87/eaton-mcl2012v1-multilayer-chip-inductor-data-shee-1622891.pdf +Inductor ferrite multilayer power +0 +2 +2 +Inductor_SMD +L_Fastron_PISN +Choke, Drossel, PISN, SMD, Fastron, +Choke Drossel PISN SMD Fastron +0 +2 +2 +Inductor_SMD +L_Fastron_PISN_Handsoldering +Choke, Drossel, PISN, SMD, Fastron, +Choke Drossel PISN SMD Fastron +0 +2 +2 +Inductor_SMD +L_Fastron_PISR +Choke, Drossel, PISR, Fastron, SMD, +Choke Drossel PISR Fastron SMD +0 +2 +2 +Inductor_SMD +L_Fastron_PISR_Handsoldering +Choke, Drossel, PISR, Fastron, SMD, +Choke Drossel PISR Fastron SMD +0 +2 +2 +Inductor_SMD +L_Ferrocore_DLG-0302 +Ferrocore DLG-0302 unshielded SMD power inductor, 3.0x2.8x2.5mm, https://www.tme.eu/Document/bda580f72a60a2225c2f6576c2740ae1/dlg-0504.pdf +smd inductor dlg-0302 +0 +2 +2 +Inductor_SMD +L_Ferrocore_DLG-0403 + Ferrocore DLG-0403 unshielded SMD power inductor, 4.5x4.0x3.2mm, https://www.tme.eu/Document/bda580f72a60a2225c2f6576c2740ae1/dlg-0504.pdf +smd inductor dlg-0403 +0 +2 +2 +Inductor_SMD +L_Ferrocore_DLG-0504 +Ferrocore DLG-0504 unshielded SMD power inductor, 5.8x5.2x4.5mm, https://www.tme.eu/Document/bda580f72a60a2225c2f6576c2740ae1/dlg-0504.pdf +smd inductor dlg-0504 +0 +2 +2 +Inductor_SMD +L_Ferrocore_DLG-0703 +Ferrocore DLG-0703 unshielded SMD power inductor, 7.8x7.0x3.5mm, https://www.tme.eu/Document/bda580f72a60a2225c2f6576c2740ae1/dlg-0504.pdf +smd inductor dlg-0703 +0 +2 +2 +Inductor_SMD +L_Ferrocore_DLG-0705 +Ferrocore DLG-0705 unshielded SMD power inductor, 7.8x7.0x5.0mm, https://www.tme.eu/Document/bda580f72a60a2225c2f6576c2740ae1/dlg-0504.pdf +smd inductor dlg-0705 +0 +2 +2 +Inductor_SMD +L_Ferrocore_DLG-1004 +Ferrocore DLG-1004 unshielded SMD power inductor, 10.0x9.0x4.0mm, https://www.tme.eu/Document/bda580f72a60a2225c2f6576c2740ae1/dlg-0504.pdf +smd inductor dlg-1004 +0 +2 +2 +Inductor_SMD +L_Ferrocore_DLG-1005 +Ferrocore DLG-1005 unshielded SMD power inductor, 10.0x9.0x5.4mm, https://www.tme.eu/Document/bda580f72a60a2225c2f6576c2740ae1/dlg-0504.pdf +smd inductor dlg-1005 +0 +2 +2 +Inductor_SMD +L_Murata_DEM35xxC +https://www.murata.com/~/media/webrenewal/products/inductor/chip/tokoproducts/wirewoundferritetypeforpl/m_dem3518c.ashx +Inductor SMD DEM35xxC +0 +2 +2 +Inductor_SMD +L_Murata_DFE201610P +Inductor, Murata, DFE201610P, 2.0x1.6x1.0mm, https://www.murata.com/~/media/webrenewal/products/inductor/chip/tokoproducts/wirewoundmetalalloychiptype/m_dfe201610p.ashx +Inductor power chip flatwire +0 +2 +2 +Inductor_SMD +L_Murata_LQH2MCNxxxx02_2.0x1.6mm +Inductor, Murata, LQH2MCN_02 series, 1.6x2.0x0.9mm (https://search.murata.co.jp/Ceramy/image/img/P02/JELF243A-0053.pdf) +chip coil inductor Murata LQH2MC +0 +2 +2 +Inductor_SMD +L_Murata_LQH55DN_5.7x5.0mm +Inductor, SMD, 5.7x5.0x4.7mm, https://search.murata.co.jp/Ceramy/image/img/P02/JELF243A-0045.pdf +inductor smd +0 +2 +2 +Inductor_SMD +L_Neosid_Air-Coil_SML_1turn_HDM0131A +Neosid, Air-Coil, SML, 1turn, HDM0131A, +Neosid Air-Coil SML 1turn HDM0131A +0 +2 +2 +Inductor_SMD +L_Neosid_Air-Coil_SML_2turn_HAM0231A +Neosid, Air-Coil, SML, 2turn, HAM0231A, +Neosid Air-Coil SML 2turn HAM0231A +0 +2 +2 +Inductor_SMD +L_Neosid_Air-Coil_SML_2turn_HDM0231A +Neosid, Air-Coil, SML, 2turn, HDM0231A, +Neosid Air-Coil SML 2turn HDM0231A +0 +2 +2 +Inductor_SMD +L_Neosid_Air-Coil_SML_3turn_HAM0331A +Neosid, Air-Coil, SML, 2turn, HAM0331A, +Neosid Air-Coil SML 3turn HAM0331A +0 +2 +2 +Inductor_SMD +L_Neosid_Air-Coil_SML_3turn_HDM0331A +Neosid, Air-Coil, SML, 3turn, HDM0331A, +Neosid Air-Coil SML 3turn HDM0331A +0 +2 +2 +Inductor_SMD +L_Neosid_Air-Coil_SML_4turn_HAM0431A +Neosid, Air-Coil, SML, 4turn, HAM0431A, +Neosid Air-Coil SML 4turn HAM0431A +0 +2 +2 +Inductor_SMD +L_Neosid_Air-Coil_SML_4turn_HDM0431A +Neosid, Air-Coil, SML, 4turn, HDM0431A, +Neosid Air-Coil SML 4turn HDM0431A +0 +2 +2 +Inductor_SMD +L_Neosid_Air-Coil_SML_5turn_HAM0531A +Neosid, Air-Coil, SML, 5turn, HAM0531A, +Neosid Air-Coil SML 5turn HAM0531A +0 +2 +2 +Inductor_SMD +L_Neosid_Air-Coil_SML_5turn_HDM0531A +Neosid, Air-Coil, SML, 5turn, HDM0531A, +Neosid Air-Coil SML 5turn HDM0531A +0 +2 +2 +Inductor_SMD +L_Neosid_Air-Coil_SML_6-10turn_HAM0631A-HAM1031A +Neosid, Air-Coil, SML, 6-10turn, HAM0631A-HAM1031A, +Neosid Air-Coil SML 6-10turn HAM0631A-HAM1031A +0 +2 +2 +Inductor_SMD +L_Neosid_Air-Coil_SML_6-10turn_HDM0431A-HDM1031A +Neosid, Air-Coil, SML, 6-10turn, HDM0431A-HDM1031A, +Neosid Air-Coil SML 6-10turn HDM0431A-HDM1031A +0 +2 +2 +Inductor_SMD +L_Neosid_Air-Coil_SML_6turn_HAM0631A +Neosid, Air-Coil, SML, 6turn, HAM0631A, +Neosid Air-Coil SML 6turn HAM0631A +0 +2 +2 +Inductor_SMD +L_Neosid_MicroCoil_Ms36-L +Neosid, Micro Coil, Inductor, Ms36-L, SMD, Fixed inductor, anti clockwise, https://neosid.de/en/products/inductors/rod-core-chokes/smd-rod-core-chokes/52026/ms-36/7-h?c=94 +Neosid Micro Coil Inductor Ms36-L SMD Fixed inductor anti clockwise +0 +2 +2 +Inductor_SMD +L_Neosid_Ms42 +Neosid, Inductor, SMs42, Fixed inductor, SMD, magneticaly shielded, https://neosid.de/import-data/product-pdf/neoFestind_Ms42.pdf +Neosid Inductor SMs42 Fixed inductor SMD magneticaly shielded +0 +2 +2 +Inductor_SMD +L_Neosid_Ms50 +Neosid, Power Inductor, Ms50, SMD, Fixed inductor, https://neosid.de/import-data/product-pdf/neoFestind_Ms50.pdf +Neosid Power Inductor Ms50 SMD Fixed inductor +0 +2 +2 +Inductor_SMD +L_Neosid_Ms50T +Neosid, Power Inductor, Ms50T, SMD, Fixed inductor, high temperature, https://neosid.de/import-data/product-pdf/neoFestind_Ms50T.pdf +Neosid Power Inductor Ms50T SMD Fixed inductor high temperature +0 +2 +2 +Inductor_SMD +L_Neosid_Ms85 +Neosid, Ms85, Ms85T, SMD Inductor, Fixed inductor, SMD, https://neosid.de/import-data/product-pdf/neoFestind_Ms85.pdf +Neosid Ms85 Ms85T SMD Inductor Fixed inductor SMD +0 +2 +2 +Inductor_SMD +L_Neosid_Ms85T +Neosid, Ms85, Ms85T, SMD Inductor, Fixed inductor, SMD, https://neosid.de/import-data/product-pdf/neoFestind_Ms85T.pdf +Neosid Ms85 Ms85T SMD Inductor Fixed inductor SMD +0 +2 +2 +Inductor_SMD +L_Neosid_Ms95 +Neosid,Inductor,Ms95, Ms95a, Ms95T, Fixed inductor, SMD, https://neosid.de/import-data/product-pdf/neoFestind_Ms95.pdf +NeosidInductorMs95 Ms95a Ms95T Fixed inductor SMD +0 +2 +2 +Inductor_SMD +L_Neosid_Ms95T +Neosid,Inductor,Ms95, Ms95a, Ms95T, Fixed inductor, SMD, https://neosid.de/import-data/product-pdf/neoFestind_Ms95T.pdf +NeosidInductorMs95 Ms95a Ms95T Fixed inductor SMD +0 +2 +2 +Inductor_SMD +L_Neosid_Ms95a +Neosid,Inductor,Ms95, Ms95a, Ms95T, Fixed inductor, SMD, https://neosid.de/import-data/product-pdf/neoFestind_Ms95a.pdf +NeosidInductorMs95 Ms95a Ms95T Fixed inductor SMD +0 +2 +2 +Inductor_SMD +L_Neosid_SM-NE95H +Neosid, Inductor,SM-NE95H, Fixed inductor, SMD, https://neosid.de/import-data/product-pdf/neoFestind_SMNE95H.pdf +Neosid Inductor SM-NE95H Fixed inductor SMD +0 +2 +2 +Inductor_SMD +L_Neosid_SM-NE127 +Neosid, Inductor, SM-NE127, Fixed inductor, SMD, https://neosid.de/import-data/product-pdf/neoFestind_SMNE127.pdf +Neosid Inductor SM-NE127 Fixed inductor SMD +0 +2 +2 +Inductor_SMD +L_Neosid_SM-NE127_HandSoldering +Neosid, Inductor, SM-NE127, Fixed inductor, SMD, https://neosid.de/import-data/product-pdf/neoFestind_SMNE127.pdf +Neosid Inductor SM-NE127 Fixed inductor SMD +0 +2 +2 +Inductor_SMD +L_Neosid_SM-NE150 +Neosid, Inductor, SM-NE150, Fixed inductor, SMD, https://neosid.de/import-data/product-pdf/neoFestind_SMNE150.pdf +Neosid Inductor SM-NE150 Fixed inductor SMD +0 +2 +2 +Inductor_SMD +L_Neosid_SM-PIC0512H +Neosid, Inductor, PIC0512H, Power Inductor, Fixed inductor, SMD, https://neosid.de/import-data/product-pdf/neoFestind_SMPIC0512H.pdf +Neosid Inductor PIC0512H Power Inductor Fixed inductor SMD +0 +2 +2 +Inductor_SMD +L_Neosid_SM-PIC0602H +Neosid, Power Inductor, SM-PIC0602H, Fixed inductor, SMD, https://neosid.de/import-data/product-pdf/neoFestind_SMPIC0602H.pdf +Neosid Power Inductor SM-PIC0602H Fixed inductor SMD +0 +2 +2 +Inductor_SMD +L_Neosid_SM-PIC0612H +Neosid, Power Inductor, SM-PIC0612H, Fixed inductor, SMD, https://neosid.de/import-data/product-pdf/neoFestind_SMPIC0612H.pdf +Neosid Power Inductor SM-PIC0612H Fixed inductor SMD +0 +2 +2 +Inductor_SMD +L_Neosid_SM-PIC1004H +Neosid, Inductor, SM-PIC1004H, Fixed inductor, SMD, https://neosid.de/import-data/product-pdf/neoFestind_SMPIC1004H.pdf +Neosid Inductor SM-PIC1004H Fixed inductor SMD +0 +2 +2 +Inductor_SMD +L_Neosid_SMS-ME3010 +Neosid, Inductor, SMS-ME3010, Fixed inductor, SMD, magnetically shielded, https://neosid.de/import-data/product-pdf/neoFestind_SMSME3010.pdf +Neosid Inductor SMS-ME3010 Fixed inductor SMD magnetically shielded +0 +2 +2 +Inductor_SMD +L_Neosid_SMS-ME3015 +Neosid, Power Inductor, SMS-ME3015, Fixed inductor, SMD, magnetically shielded, https://neosid.de/import-data/product-pdf/neoFestind_SMSME3015.pdf +Neosid Power Inductor SMS-ME3015 Fixed inductor SMD magnetically shielded +0 +2 +2 +Inductor_SMD +L_Neosid_SMs42 +Neosid, Inductor, SMs42, Fixed inductor, SMD, magneticaly shielded, https://neosid.de/import-data/product-pdf/neoFestind_ma_SMs42.pdf +Neosid Inductor SMs42 Fixed inductor SMD magneticaly shielded +0 +2 +2 +Inductor_SMD +L_Neosid_SMs50 +Neosid, Inductor, SMs50, Fixed inductor, SMD, magneticaly shielded, https://neosid.de/import-data/product-pdf/neoFestind_ma_SMs50.pdf +Neosid Inductor SMs50 Fixed inductor SMD magneticaly shielded +0 +2 +2 +Inductor_SMD +L_Neosid_SMs85 +Neosid, Inductor, SMs85, Fixed inductor, SMD, magnetically shielded, https://neosid.de/import-data/product-pdf/neoFestind_ma_SMs85.pdf +Neosid Inductor SMs85 Fixed inductor SMD magnetically shielded +0 +2 +2 +Inductor_SMD +L_Neosid_SMs95_SMs95p +Neosid, Inductor, SMs95, Fixed inductor, SMD, magnetically shielded, https://neosid.de/import-data/product-pdf/neoFestind_SMs95SMs95p.pdf +Neosid Inductor SMs95 Fixed inductor SMD magnetically shielded +0 +2 +2 +Inductor_SMD +L_Pulse_P059x +1:1, Power Inductor, https://productfinder.pulseelectronics.com/api/open/product-attachments/datasheet/p0599nl +inductor coil choke +0 +4 +4 +Inductor_SMD +L_Pulse_PA4320 +Inductor SMD Pulse PA4320 http://productfinder.pulseeng.com/products/datasheets/P787.pdf +Inductor SMD Pulse PA4320 +0 +2 +2 +Inductor_SMD +L_Pulse_PA4344 +Pulse PA4344 / PM4344 Series SMD Inductors https://productfinder.pulseelectronics.com/api/public/uploads/product-attachments/datasheet_p771_1608107700.pdf +Pulse PA4344 PM4344 Series SMD Inductors +0 +2 +2 +Inductor_SMD +L_Pulse_PA4349 +Shielded Molded High Current Power Inductors 23.5x22mm, https://productfinder.pulseelectronics.com/api/open/product-attachments/datasheet/pa4349.104anlt +Shielded Molded High Current Power Inductor +0 +2 +2 +Inductor_SMD +L_Sagami_CER1242B +Inductor, Sagami, h=4.5mm, http://www.sagami-elec.co.jp/file/CER1242B-CER1257B-CER1277B.pdf +inductor sagami cer12xxb smd +0 +2 +2 +Inductor_SMD +L_Sagami_CER1257B +Inductor, Sagami, h=6.0mm, http://www.sagami-elec.co.jp/file/CER1242B-CER1257B-CER1277B.pdf +inductor sagami cer12xxb smd +0 +2 +2 +Inductor_SMD +L_Sagami_CER1277B +Inductor, Sagami, h=8.0mm, http://www.sagami-elec.co.jp/file/CER1242B-CER1257B-CER1277B.pdf +inductor sagami cer12xxb smd +0 +2 +2 +Inductor_SMD +L_Sagami_CWR1242C +Sagami power inductor, CWR1242C, H=4.5mm (http://www.sagami-elec.co.jp/file/16Car_SMDCwr.pdf) +inductor sagami cwr12xx smd +0 +4 +2 +Inductor_SMD +L_Sagami_CWR1257C +Sagami power inductor, CWR1242C, H=6.0mm (http://www.sagami-elec.co.jp/file/16Car_SMDCwr.pdf) +inductor sagami cwr12xx smd +0 +4 +2 +Inductor_SMD +L_Sagami_CWR1277C +Sagami power inductor, CWR1242C, H=7.7mm (http://www.sagami-elec.co.jp/file/16Car_SMDCwr.pdf) +inductor sagami cwr12xx smd +0 +4 +2 +Inductor_SMD +L_SigTra_SC3316F +http://www.signaltransformer.com/sites/all/pdf/smd/P080_SC3316F.pdf +Choke +0 +2 +2 +Inductor_SMD +L_Sumida_CDMC6D28_7.25x6.5mm +SMD Power Inductor (http://products.sumida.com/products/pdf/CDMC6D28.pdf) +Inductor Sumida SMD CDMC6D28 +0 +2 +2 +Inductor_SMD +L_Sumida_CR75 +Inductor, Sumida, 8.1mm × 7.3mm × 5.5 mm, Unshielded, http://products.sumida.com/products/pdf/CR75.pdf +Inductor SMD CR75 Unshielded +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA0402S +Inductor, Sunlord, MWSA0402S, 4.4x4.2x1.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA0412S +Inductor, Sunlord, MWSA0412S, 4.4x4.2x1.0mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA0503S +Inductor, Sunlord, MWSA0503S, 5.4x5.2x2.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA0518S +Inductor, Sunlord, MWSA0518S, 5.4x5.2x1.6mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA0602S +Inductor, Sunlord, MWSA0602S, 7.0x6.6x1.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA0603S +Inductor, Sunlord, MWSA0603S, 7.0x6.6x2.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA0604S +Inductor, Sunlord, MWSA0604S, 7.0x6.6x3.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA0605S +Inductor, Sunlord, MWSA0605S, 7.0x6.6x4.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA0615S +Inductor, Sunlord, MWSA0615S, 7.0x6.6x1.3mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA0618S +Inductor, Sunlord, MWSA0618S, 7.0x6.6x1.6mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA0624S +Inductor, Sunlord, MWSA0624S, 7.0x6.6x2.2mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA0804S +Inductor, Sunlord, MWSA0804S, 8.2x8.8x3.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1003S +Inductor, Sunlord, MWSA1003S, 11.5x10.0x2.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1004S +Inductor, Sunlord, MWSA1004S, 11.0x10.0x3.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1005S +Inductor, Sunlord, MWSA1005S, 11.5x10.0x4.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1204S-1R0 +Inductor, Sunlord, MWSA1204S-1R0, 13.45x12.8x4.0mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1204S-1R5 +Inductor, Sunlord, MWSA1204S-1R5, 13.45x12.8x4.0mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1204S-2R2 +Inductor, Sunlord, MWSA1204S-2R2, 13.45x12.8x4.0mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1204S-3R3 +Inductor, Sunlord, MWSA1204S-3R3, 13.45x12.8x4.0mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1204S-4R7 +Inductor, Sunlord, MWSA1204S-4R7, 13.45x12.8x4.0mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1204S-6R8 +Inductor, Sunlord, MWSA1204S-6R8, 13.45x12.8x4.0mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1204S-100 +Inductor, Sunlord, MWSA1204S-100, 13.45x12.8x4.0mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1204S-150 +Inductor, Sunlord, MWSA1204S-150, 13.45x12.8x4.0mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1204S-220 +Inductor, Sunlord, MWSA1204S-220, 13.45x12.8x4.0mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1204S-R22 +Inductor, Sunlord, MWSA1204S-R22, 13.45x12.8x4.0mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1204S-R47 +Inductor, Sunlord, MWSA1204S-R47, 13.45x12.8x4.0mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1204S-R68 +Inductor, Sunlord, MWSA1204S-R68, 13.45x12.8x4.0mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1204S-R82 +Inductor, Sunlord, MWSA1204S-R82, 13.45x12.8x4.0mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1205S-1R0 +Inductor, Sunlord, MWSA1205S-1R0, 13.45x12.6x4.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1205S-1R5 +Inductor, Sunlord, MWSA1205S-1R5, 13.45x12.6x4.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1205S-2R2 +Inductor, Sunlord, MWSA1205S-2R2, 13.45x12.6x4.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1205S-3R3 +Inductor, Sunlord, MWSA1205S-3R3, 13.45x12.6x4.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1205S-4R7 +Inductor, Sunlord, MWSA1205S-4R7, 13.45x12.6x4.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1205S-6R8 +Inductor, Sunlord, MWSA1205S-6R8, 13.45x12.6x4.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1205S-100 +Inductor, Sunlord, MWSA1205S-100, 13.45x12.6x4.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1205S-150 +Inductor, Sunlord, MWSA1205S-150, 13.45x12.6x4.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1205S-220 +Inductor, Sunlord, MWSA1205S-220, 13.45x12.6x4.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1205S-330 +Inductor, Sunlord, MWSA1205S-330, 13.45x12.6x4.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1205S-470 +Inductor, Sunlord, MWSA1205S-470, 13.45x12.6x4.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1205S-R22 +Inductor, Sunlord, MWSA1205S-R22, 13.45x12.6x4.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1205S-R36 +Inductor, Sunlord, MWSA1205S-R36, 13.45x12.6x4.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1205S-R50 +Inductor, Sunlord, MWSA1205S-R50, 13.45x12.6x4.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1205S-R68 +Inductor, Sunlord, MWSA1205S-R68, 13.45x12.6x4.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1205S-R82 +Inductor, Sunlord, MWSA1205S-R82, 13.45x12.6x4.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1206S-1R5 +Inductor, Sunlord, MWSA1206S-1R5, 13.45x12.6x5.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1206S-2R2 +Inductor, Sunlord, MWSA1206S-2R2, 13.45x12.6x5.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1206S-3R3 +Inductor, Sunlord, MWSA1206S-3R3, 13.45x12.6x5.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1206S-4R7 +Inductor, Sunlord, MWSA1206S-4R7, 13.45x12.6x5.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1206S-5R6 +Inductor, Sunlord, MWSA1206S-5R6, 13.45x12.6x5.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1206S-6R8 +Inductor, Sunlord, MWSA1206S-6R8, 13.45x12.6x5.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1206S-8R2 +Inductor, Sunlord, MWSA1206S-8R2, 13.45x12.6x5.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1206S-100 +Inductor, Sunlord, MWSA1206S-100, 13.45x12.6x5.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1206S-101 +Inductor, Sunlord, MWSA1206S-101, 13.45x12.6x5.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1206S-120 +Inductor, Sunlord, MWSA1206S-120, 13.45x12.6x5.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1206S-121 +Inductor, Sunlord, MWSA1206S-121, 13.45x12.6x5.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1206S-150 +Inductor, Sunlord, MWSA1206S-150, 13.45x12.6x5.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1206S-151 +Inductor, Sunlord, MWSA1206S-151, 13.45x12.6x5.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1206S-180 +Inductor, Sunlord, MWSA1206S-180, 13.45x12.6x5.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1206S-220 +Inductor, Sunlord, MWSA1206S-220, 13.45x12.6x5.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1206S-270 +Inductor, Sunlord, MWSA1206S-270, 13.45x12.6x5.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1206S-330 +Inductor, Sunlord, MWSA1206S-330, 13.45x12.6x5.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1206S-470 +Inductor, Sunlord, MWSA1206S-470, 13.45x12.6x5.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1206S-680 +Inductor, Sunlord, MWSA1206S-680, 13.45x12.6x5.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1206S-R68 +Inductor, Sunlord, MWSA1206S-R68, 13.45x12.6x5.8mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1265S +Inductor, Sunlord, MWSA1265S, 13.45x12.6x6.5mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA1707S +Inductor, Sunlord, MWSA1707S, 17.15x17.15x6.7mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_MWSA2213S +Inductor, Sunlord, MWSA2213S, 23.5x22.0x12.6mm, https://sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMjExMTUxNDQ4MDU0NTQucGRm&lan=en +Inductor mwsa +0 +2 +2 +Inductor_SMD +L_Sunlord_SWPA3010S +Inductor, Sunlord, SWPA3010S, 3.0x3.0x1.0mm, https://www.sunlordinc.com/UploadFiles/PDF_Cat/20120704094224784.pdf +Inductor swpa +0 +2 +2 +Inductor_SMD +L_Sunlord_SWPA3012S +Inductor, Sunlord, SWPA3012S, 3.0x3.0x1.2mm, https://www.sunlordinc.com/UploadFiles/PDF_Cat/20120704094224784.pdf +Inductor swpa +0 +2 +2 +Inductor_SMD +L_Sunlord_SWPA3015S +Inductor, Sunlord, SWPA3015S, 3.0x3.0x1.5mm, https://www.sunlordinc.com/UploadFiles/PDF_Cat/20120704094224784.pdf +Inductor swpa +0 +2 +2 +Inductor_SMD +L_Sunlord_SWPA4010S +Inductor, Sunlord, SWPA4010S, 4.0x4.0x1.0mm, https://www.sunlordinc.com/UploadFiles/PDF_Cat/20120704094224784.pdf +Inductor swpa +0 +2 +2 +Inductor_SMD +L_Sunlord_SWPA4012S +Inductor, Sunlord, SWPA4012S, 4.0x4.0x1.2mm, https://www.sunlordinc.com/UploadFiles/PDF_Cat/20120704094224784.pdf +Inductor swpa +0 +2 +2 +Inductor_SMD +L_Sunlord_SWPA4018S +Inductor, Sunlord, SWPA4018S, 4.0x4.0x1.8mm, https://www.sunlordinc.com/UploadFiles/PDF_Cat/20120704094224784.pdf +Inductor swpa +0 +2 +2 +Inductor_SMD +L_Sunlord_SWPA4020S +Inductor, Sunlord, SWPA4020S, 4.0x4.0x2.0mm, https://www.sunlordinc.com/UploadFiles/PDF_Cat/20120704094224784.pdf +Inductor swpa +0 +2 +2 +Inductor_SMD +L_Sunlord_SWPA4026S +Inductor, Sunlord, SWPA4026S, 4.0x4.0x2.6mm, https://www.sunlordinc.com/UploadFiles/PDF_Cat/20120704094224784.pdf +Inductor swpa +0 +2 +2 +Inductor_SMD +L_Sunlord_SWPA4030S +Inductor, Sunlord, SWPA4030S, 4.0x4.0x3.0mm, https://www.sunlordinc.com/UploadFiles/PDF_Cat/20120704094224784.pdf +Inductor swpa +0 +2 +2 +Inductor_SMD +L_Sunlord_SWPA5012S +Inductor, Sunlord, SWPA5012S, 5.0x5.0x1.2mm, https://www.sunlordinc.com/UploadFiles/PDF_Cat/20120704094224784.pdf +Inductor swpa +0 +2 +2 +Inductor_SMD +L_Sunlord_SWPA5020S +Inductor, Sunlord, SWPA5020S, 5.0x5.0x2.0mm, https://www.sunlordinc.com/UploadFiles/PDF_Cat/20120704094224784.pdf +Inductor swpa +0 +2 +2 +Inductor_SMD +L_Sunlord_SWPA5040S +Inductor, Sunlord, SWPA5040S, 5.0x5.0x4.0mm, https://www.sunlordinc.com/UploadFiles/PDF_Cat/20120704094224784.pdf +Inductor swpa +0 +2 +2 +Inductor_SMD +L_Sunlord_SWPA6020S +Inductor, Sunlord, SWPA6020S, 6.0x6.0x2.0mm, https://www.sunlordinc.com/UploadFiles/PDF_Cat/20120704094224784.pdf +Inductor swpa +0 +2 +2 +Inductor_SMD +L_Sunlord_SWPA6028S +Inductor, Sunlord, SWPA6028S, 6.0x6.0x2.8mm, https://www.sunlordinc.com/UploadFiles/PDF_Cat/20120704094224784.pdf +Inductor swpa +0 +2 +2 +Inductor_SMD +L_Sunlord_SWPA6040S +Inductor, Sunlord, SWPA6040S, 6.0x6.0x4.0mm, https://www.sunlordinc.com/UploadFiles/PDF_Cat/20120704094224784.pdf +Inductor swpa +0 +2 +2 +Inductor_SMD +L_Sunlord_SWPA6045S +Inductor, Sunlord, SWPA6045S, 6.0x6.0x4.5mm, https://www.sunlordinc.com/UploadFiles/PDF_Cat/20120704094224784.pdf +Inductor swpa +0 +2 +2 +Inductor_SMD +L_Sunlord_SWPA8040S +Inductor, Sunlord, SWPA8040S, 8.0x8.0x4.2mm, https://www.sunlordinc.com/UploadFiles/PDF_Cat/20120704094224784.pdf +Inductor swpa +0 +2 +2 +Inductor_SMD +L_Sunlord_SWPA252010S +Inductor, Sunlord, SWPA252010S, 2.5x2.0x1.0mm, https://www.sunlordinc.com/UploadFiles/PDF_Cat/20120704094224784.pdf +Inductor swpa +0 +2 +2 +Inductor_SMD +L_Sunlord_SWPA252012S +Inductor, Sunlord, SWPA252012S, 2.5x2.0x1.2mm, https://www.sunlordinc.com/UploadFiles/PDF_Cat/20120704094224784.pdf +Inductor swpa +0 +2 +2 +Inductor_SMD +L_Sunlord_SWRB1204S +Inductor, Sunlord, SWRB1204S, 12.5x12.5x5.0mm, https://www.sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMTA2MTAxMTMyMzc4MTEucGRm&lan=en +Inductor swrb +0 +2 +2 +Inductor_SMD +L_Sunlord_SWRB1205S +Inductor, Sunlord, SWRB1205S, 12.5x12.5x6.0mm, https://www.sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMTA2MTAxMTMyMzc4MTEucGRm&lan=en +Inductor swrb +0 +2 +2 +Inductor_SMD +L_Sunlord_SWRB1207S +Inductor, Sunlord, SWRB1207S, 12.5x12.5x8.0mm, https://www.sunlordinc.com/Download.aspx?file=L1VwbG9hZEZpbGVzL1BERl9DYXQvMjAyMTA2MTAxMTMyMzc4MTEucGRm&lan=en +Inductor swrb +0 +2 +2 +Inductor_SMD +L_TDK_MLZ1608 +Inductor, TDK, MLZ1608, 1.6x0.8x0.8mm, "https://product.tdk.com/system/files/dam/doc/product/inductor/inductor/smd/catalog/inductor_commercial_decoupling_mlz1608_en.pdf" +Inductor MLZ +0 +2 +2 +Inductor_SMD +L_TDK_MLZ2012_h0.85mm +Inductor, TDK, MLZ2012_h0.85mm, 2.0x1.25x0.85mm, "https://product.tdk.com/system/files/dam/doc/product/inductor/inductor/smd/catalog/inductor_commercial_decoupling_mlz2012_en.pdf" +Inductor MLZ +0 +2 +2 +Inductor_SMD +L_TDK_MLZ2012_h1.25mm +Inductor, TDK, MLZ2012_h1.25mm, 2.0x1.25x1.25mm, "https://product.tdk.com/system/files/dam/doc/product/inductor/inductor/smd/catalog/inductor_commercial_decoupling_mlz2012_en.pdf" +Inductor MLZ +0 +2 +2 +Inductor_SMD +L_TDK_NLV25_2.5x2.0mm +TDK NLV25, 2.5x2.0x1.8mm, https://product.tdk.com/info/en/catalog/datasheets/inductor_commercial_standard_nlv25-ef_en.pdf +tdk nlv25 nlcv25 nlfv25 +0 +2 +2 +Inductor_SMD +L_TDK_NLV32_3.2x2.5mm +TDK NLV32, 3.2x2.5x2.2mm, https://product.tdk.com/info/en/catalog/datasheets/inductor_commercial_standard_nlv32-ef_en.pdf +tdk nlv32 nlcv32 nlfv32 +0 +2 +2 +Inductor_SMD +L_TDK_SLF6025 +Inductor, TDK, SLF6025, 6.0mmx6.0mm (Script generated with StandardBox.py) (https://product.tdk.com/info/en/document/catalog/smd/inductor_commercial_power_slf6025_en.pdf) +Inductor TDK_SLF6025 +0 +2 +2 +Inductor_SMD +L_TDK_SLF6028 +Inductor, TDK, SLF6028, 6.0mmx6.0mm (Script generated with StandardBox.py) (https://product.tdk.com/info/en/document/catalog/smd/inductor_commercial_power_slf6028_en.pdf) +Inductor TDK_SLF6028 +0 +2 +2 +Inductor_SMD +L_TDK_SLF6045 +Inductor, TDK, SLF6045, 6.0mmx6.0mm (Script generated with StandardBox.py) (https://product.tdk.com/info/en/document/catalog/smd/inductor_commercial_power_slf6045_en.pdf) +Inductor TDK_SLF6045 +0 +2 +2 +Inductor_SMD +L_TDK_SLF7032 +Inductor, TDK, SLF7032, 7.0mmx7.0mm (Script generated with StandardBox.py) (https://product.tdk.com/info/en/document/catalog/smd/inductor_commercial_power_slf7032_en.pdf) +Inductor TDK_SLF7032 +0 +2 +2 +Inductor_SMD +L_TDK_SLF7045 +Inductor, TDK, SLF7045, 7.0mmx7.0mm (Script generated with StandardBox.py) (https://product.tdk.com/info/en/document/catalog/smd/inductor_commercial_power_slf7045_en.pdf) +Inductor TDK_SLF7045 +0 +2 +2 +Inductor_SMD +L_TDK_SLF7055 +Inductor, TDK, SLF7055, 7.0mmx7.0mm (Script generated with StandardBox.py) (https://product.tdk.com/info/en/document/catalog/smd/inductor_commercial_power_slf7055_en.pdf) +Inductor TDK_SLF7055 +0 +2 +2 +Inductor_SMD +L_TDK_SLF10145 +Inductor, TDK, SLF10145, 10.1mmx10.1mm (Script generated with StandardBox.py) (https://product.tdk.com/info/en/catalog/datasheets/inductor_automotive_power_slf10145-h_en.pdf) +Inductor TDK_SLF10145 +0 +2 +2 +Inductor_SMD +L_TDK_SLF10165 +Inductor, TDK, SLF10165, 10.1mmx10.1mm (Script generated with StandardBox.py) (https://product.tdk.com/info/en/catalog/datasheets/inductor_commercial_power_slf10165_en.pdf) +Inductor TDK_SLF10165 +0 +2 +2 +Inductor_SMD +L_TDK_SLF12555 +Inductor, TDK, SLF12555, 12.5mmx12.5mm (Script generated with StandardBox.py) (https://product.tdk.com/info/en/catalog/datasheets/inductor_commercial_power_slf12555_en.pdf) +Inductor SLF12555 +0 +2 +2 +Inductor_SMD +L_TDK_SLF12565 +Inductor, TDK, SLF12565, 12.5mmx12.5mm (Script generated with StandardBox.py) (https://product.tdk.com/info/en/catalog/datasheets/inductor_automotive_power_slf12565-h_en.pdf) +Inductor SLF12565 +0 +2 +2 +Inductor_SMD +L_TDK_SLF12575 +Inductor, TDK, SLF12575, 12.5mmx12.5mm (Script generated with StandardBox.py) (https://product.tdk.com/info/en/catalog/datasheets/inductor_automotive_power_slf12575-h_en.pdf) +Inductor SLF12575 +0 +2 +2 +Inductor_SMD +L_TDK_VLF10040 +Inductor,TDK, TDK-VLP-8040, 8.6mmx8.6mm +inductor TDK VLP smd VLF10040 +0 +2 +2 +Inductor_SMD +L_TDK_VLP8040 +Inductor,TDK, TDK-VLP-8040, 8.6mmx8.6mm +inductor TDK VLP smd VLP8040 +0 +2 +2 +Inductor_SMD +L_TDK_VLS6045EX_VLS6045AF +Inductor,TDK, VLS-6045, 6x6x4.5mm, https://product.tdk.com/system/files/dam/doc/product/inductor/inductor/smd/catalog/inductor_commercial_power_vls6045ex_en.pdf +inductor TDK VLS SMD VLS6045EF VLS6045AF +0 +2 +2 +Inductor_SMD +L_TaiTech_TMPC1265_13.5x12.5mm +Tai Tech TMPC1265 series SMD inductor https://datasheet.lcsc.com/lcsc/2009171439_TAI-TECH-TMPC1265HP-100MG-D_C305223.pdf, 13.5x12.5x6.2mm +Tai Tech TMPC1265 SMD inductor +0 +2 +2 +Inductor_SMD +L_Taiyo-Yuden_BK_Array_1206_3216Metric +Ferrite Bead Array 4x0603, Taiyo Yuden BK Series (see https://www.yuden.co.jp/productdata/catalog/mlci09_e.pdf) +ferrite bead array +0 +8 +8 +Inductor_SMD +L_Taiyo-Yuden_MD-1616 +Inductor, Taiyo Yuden, MD series, Taiyo-Yuden_MD-1616, 1.6mmx1.6mm +inductor taiyo-yuden md smd +0 +2 +2 +Inductor_SMD +L_Taiyo-Yuden_MD-2020 +Inductor, Taiyo Yuden, MD series, Taiyo-Yuden_MD-2020, 2.0mmx2.0mm +inductor taiyo-yuden md smd +0 +2 +2 +Inductor_SMD +L_Taiyo-Yuden_MD-3030 +Inductor, Taiyo Yuden, MD series, Taiyo-Yuden_MD-3030, 3.0mmx3.0mm +inductor taiyo-yuden md smd +0 +2 +2 +Inductor_SMD +L_Taiyo-Yuden_MD-4040 +Inductor, Taiyo Yuden, MD series, Taiyo-Yuden_MD-4040, 4.0mmx4.0mm +inductor taiyo-yuden md smd +0 +2 +2 +Inductor_SMD +L_Taiyo-Yuden_MD-5050 +Inductor, Taiyo Yuden, MD series, Taiyo-Yuden_MD-5050, 5.0mmx5.0mm +inductor taiyo-yuden md smd +0 +2 +2 +Inductor_SMD +L_Taiyo-Yuden_NR-20xx +Inductor, Taiyo Yuden, NR series, Taiyo-Yuden_NR-20xx, 2.0mmx2.0mm +inductor taiyo-yuden nr smd +0 +2 +2 +Inductor_SMD +L_Taiyo-Yuden_NR-20xx_HandSoldering +Inductor, Taiyo Yuden, NR series, Taiyo-Yuden_NR-20xx, 2.0mmx2.0mm +inductor taiyo-yuden nr smd +0 +2 +2 +Inductor_SMD +L_Taiyo-Yuden_NR-24xx +Inductor, Taiyo Yuden, NR series, Taiyo-Yuden_NR-24xx, 2.4mmx2.4mm +inductor taiyo-yuden nr smd +0 +2 +2 +Inductor_SMD +L_Taiyo-Yuden_NR-24xx_HandSoldering +Inductor, Taiyo Yuden, NR series, Taiyo-Yuden_NR-24xx, 2.4mmx2.4mm +inductor taiyo-yuden nr smd +0 +2 +2 +Inductor_SMD +L_Taiyo-Yuden_NR-30xx +Inductor, Taiyo Yuden, NR series, Taiyo-Yuden_NR-30xx, 3.0mmx3.0mm +inductor taiyo-yuden nr smd +0 +2 +2 +Inductor_SMD +L_Taiyo-Yuden_NR-30xx_HandSoldering +Inductor, Taiyo Yuden, NR series, Taiyo-Yuden_NR-30xx, 3.0mmx3.0mm +inductor taiyo-yuden nr smd +0 +2 +2 +Inductor_SMD +L_Taiyo-Yuden_NR-40xx +Inductor, Taiyo Yuden, NR series, Taiyo-Yuden_NR-40xx, 4.0mmx4.0mm +inductor taiyo-yuden nr smd +0 +2 +2 +Inductor_SMD +L_Taiyo-Yuden_NR-40xx_HandSoldering +Inductor, Taiyo Yuden, NR series, Taiyo-Yuden_NR-40xx, 4.0mmx4.0mm +inductor taiyo-yuden nr smd +0 +2 +2 +Inductor_SMD +L_Taiyo-Yuden_NR-50xx +Inductor, Taiyo Yuden, NR series, Taiyo-Yuden_NR-50xx, 4.9mmx4.9mm +inductor taiyo-yuden nr smd +0 +2 +2 +Inductor_SMD +L_Taiyo-Yuden_NR-50xx_HandSoldering +Inductor, Taiyo Yuden, NR series, Taiyo-Yuden_NR-50xx, 4.9mmx4.9mm +inductor taiyo-yuden nr smd +0 +2 +2 +Inductor_SMD +L_Taiyo-Yuden_NR-60xx +Inductor, Taiyo Yuden, NR series, Taiyo-Yuden_NR-60xx, 6.0mmx6.0mm +inductor taiyo-yuden nr smd +0 +2 +2 +Inductor_SMD +L_Taiyo-Yuden_NR-60xx_HandSoldering +Inductor, Taiyo Yuden, NR series, Taiyo-Yuden_NR-60xx, 6.0mmx6.0mm +inductor taiyo-yuden nr smd +0 +2 +2 +Inductor_SMD +L_Taiyo-Yuden_NR-80xx +Inductor, Taiyo Yuden, NR series, Taiyo-Yuden_NR-80xx, 8.0mmx8.0mm +inductor taiyo-yuden nr smd +0 +2 +2 +Inductor_SMD +L_Taiyo-Yuden_NR-80xx_HandSoldering +Inductor, Taiyo Yuden, NR series, Taiyo-Yuden_NR-80xx, 8.0mmx8.0mm +inductor taiyo-yuden nr smd +0 +2 +2 +Inductor_SMD +L_Taiyo-Yuden_NR-10050_9.8x10.0mm +Inductor, Taiyo Yuden, NR series, Taiyo-Yuden_NR-10050, 9.8mmx10.0mm, https://ds.yuden.co.jp/TYCOMPAS/or/specSheet?pn=NR10050T1R3N +inductor taiyo-yuden nr smd +0 +2 +2 +Inductor_SMD +L_Taiyo-Yuden_NR-10050_9.8x10.0mm_HandSoldering +Inductor, Taiyo Yuden, NR series, Taiyo-Yuden_NR-10050, 9.8mmx10.0mm, https://ds.yuden.co.jp/TYCOMPAS/or/specSheet?pn=NR10050T1R3N +inductor taiyo-yuden nr smd +0 +2 +2 +Inductor_SMD +L_TracoPower_TCK-047_5.2x5.8mm +Inductor, Traco, TCK-047, 5.2x5.8mm, https://www.tracopower.com/products/tck047.pdf +inductor smd traco +0 +2 +2 +Inductor_SMD +L_TracoPower_TCK-141 +Choke, SMD, 4.0x4.0mm 2.1mm height, https://www.tracopower.com/products/tck141.pdf +Choke SMD +0 +2 +2 +Inductor_SMD +L_Vishay_IFSC-1515AH_4x4x1.8mm +Low Profile, High Current Inductors (https://www.vishay.com/docs/34295/sc15ah01.pdf) +SMD Vishay Inductor Low Profile +0 +2 +2 +Inductor_SMD +L_Vishay_IHLP-1212 +Inductor, Vishay, IHLP series, 3.0mmx3.0mm +inductor vishay ihlp smd +0 +2 +2 +Inductor_SMD +L_Vishay_IHLP-1616 +Inductor, Vishay, IHLP series, 4.1mmx4.1mm +inductor vishay ihlp smd +0 +2 +2 +Inductor_SMD +L_Vishay_IHLP-2020 +Inductor, Vishay, IHLP series, 5.1mmx5.1mm +inductor vishay ihlp smd +0 +2 +2 +Inductor_SMD +L_Vishay_IHLP-2525 +Inductor, Vishay, IHLP series, 6.3mmx6.3mm +inductor vishay ihlp smd +0 +2 +2 +Inductor_SMD +L_Vishay_IHLP-4040 +Inductor, Vishay, IHLP series, 10.2mmx10.2mm +inductor vishay ihlp smd +0 +2 +2 +Inductor_SMD +L_Vishay_IHLP-5050 +Inductor, Vishay, IHLP series, 12.7mmx12.7mm +inductor vishay ihlp smd +0 +2 +2 +Inductor_SMD +L_Vishay_IHLP-6767 +Inductor, Vishay, IHLP series, 17.0mmx17.0mm +inductor vishay ihlp smd +0 +2 +2 +Inductor_SMD +L_Vishay_IHSM-3825 +Inductor, Vishay, Vishay_IHSM-3825, http://www.vishay.com/docs/34018/ihsm3825.pdf, 11.2mmx6.3mm +inductor vishay icsm smd +0 +2 +2 +Inductor_SMD +L_Vishay_IHSM-4825 +Inductor, Vishay, Vishay_IHSM-4825, http://www.vishay.com/docs/34019/ihsm4825.pdf, 13.7mmx6.3mm +inductor vishay icsm smd +0 +2 +2 +Inductor_SMD +L_Vishay_IHSM-5832 +Inductor, Vishay, Vishay_IHSM-5832, http://www.vishay.com/docs/34020/ihsm5832.pdf, 16.3mmx8.1mm +inductor vishay icsm smd +0 +2 +2 +Inductor_SMD +L_Vishay_IHSM-7832 +Inductor, Vishay, Vishay_IHSM-7832, http://www.vishay.com/docs/34021/ihsm7832.pdf, 19.8mmx8.1mm +inductor vishay icsm smd +0 +2 +2 +Inductor_SMD +L_Walsin_WLFM201209x +Inductor, Walsin, WLFM201209x, 2.0x1.25x0.9mm, http://www.passivecomponent.com/wp-content/uploads/inductor/WLFM_C_series.pdf +Inductor ferrite multilayer power +0 +2 +2 +Inductor_SMD +L_Walsin_WLFM201609x +Inductor, Walsin, WLFM201609x, 2.0x1.6x0.9mm, http://www.passivecomponent.com/wp-content/uploads/inductor/WLFM_C_series.pdf +Inductor ferrite multilayer power +0 +2 +2 +Inductor_SMD +L_Walsin_WLFM252009x +Inductor, Walsin, WLFM252009x, 2.5x2.0x0.9mm, http://www.passivecomponent.com/wp-content/uploads/inductor/WLFM_C_series.pdf +Inductor ferrite multilayer power +0 +2 +2 +Inductor_SMD +L_Wuerth_HCF-2013 +7443630070, http://katalog.we-online.de/pbs/datasheet/7443630070.pdf +inductor shielded wuerth hcf +0 +3 +2 +Inductor_SMD +L_Wuerth_HCF-2815 +74436410150, http://katalog.we-online.de/pbs/datasheet/74436410150.pdf +inductor shielded wuerth hcf +0 +3 +2 +Inductor_SMD +L_Wuerth_HCF-2818 +7443640330, http://katalog.we-online.de/pbs/datasheet/7443640330.pdf +inductor shielded wuerth hcf +0 +3 +2 +Inductor_SMD +L_Wuerth_HCI-1030 +Inductor, Wuerth Elektronik, Wuerth_HCI-1030, 10.6mmx10.6mm +inductor Wuerth hci smd +0 +2 +2 +Inductor_SMD +L_Wuerth_HCI-1040 +Inductor, Wuerth Elektronik, Wuerth_HCI-1040, 10.2mmx10.2mm +inductor Wuerth hci smd +0 +2 +2 +Inductor_SMD +L_Wuerth_HCI-1050 +Inductor, Wuerth Elektronik, Wuerth_HCI-1050, 10.2mmx10.2mm +inductor Wuerth hci smd +0 +2 +2 +Inductor_SMD +L_Wuerth_HCI-1335 +Inductor, Wuerth Elektronik, Wuerth_HCI-1335, 12.8mmx12.8mm +inductor Wuerth hci smd +0 +2 +2 +Inductor_SMD +L_Wuerth_HCI-1350 +Inductor, Wuerth Elektronik, Wuerth_HCI-1350, 12.8mmx12.8mm +inductor Wuerth hci smd +0 +2 +2 +Inductor_SMD +L_Wuerth_HCI-1365 +Inductor, Wuerth Elektronik, Wuerth_HCI-1365, 12.8mmx12.8mm +inductor Wuerth hci smd +0 +2 +2 +Inductor_SMD +L_Wuerth_HCI-1890 +Inductor, Wuerth Elektronik, Wuerth_HCI-1890, 18.2mmx18.2mm +inductor Wuerth hci smd +0 +2 +2 +Inductor_SMD +L_Wuerth_HCI-2212 +Inductor, Wuerth Elektronik, Wuerth_HCI-2212, 22.5mmx22.0mm +inductor Wuerth hci smd +0 +2 +2 +Inductor_SMD +L_Wuerth_HCI-5040 +Inductor, Wuerth Elektronik, Wuerth_HCI-5040, 5.5mmx5.2mm +inductor Wuerth hci smd +0 +2 +2 +Inductor_SMD +L_Wuerth_HCI-7030 +Inductor, Wuerth Elektronik, Wuerth_HCI-7030, 6.9mmx6.9mm +inductor Wuerth hci smd +0 +2 +2 +Inductor_SMD +L_Wuerth_HCI-7040 +Inductor, Wuerth Elektronik, Wuerth_HCI-7040, 6.9mmx6.9mm +inductor Wuerth hci smd +0 +2 +2 +Inductor_SMD +L_Wuerth_HCI-7050 +Inductor, Wuerth Elektronik, Wuerth_HCI-7050, 6.9mmx6.9mm +inductor Wuerth hci smd +0 +2 +2 +Inductor_SMD +L_Wuerth_HCM-1050 +Inductor, Wuerth Elektronik, Wuerth_HCM-1050, 10.2mmx7.0mm +inductor Wuerth hcm smd +0 +2 +2 +Inductor_SMD +L_Wuerth_HCM-1052 +Inductor, Wuerth Elektronik, Wuerth_HCM-1052, 10.5mmx10.3mm +inductor Wuerth hcm smd +0 +2 +2 +Inductor_SMD +L_Wuerth_HCM-1070 +Inductor, Wuerth Elektronik, Wuerth_HCM-1070, 10.1mmx7.0mm +inductor Wuerth hcm smd +0 +2 +2 +Inductor_SMD +L_Wuerth_HCM-1078 +Inductor, Wuerth Elektronik, Wuerth_HCM-1078, 9.4mmx6.2mm +inductor Wuerth hcm smd +0 +2 +2 +Inductor_SMD +L_Wuerth_HCM-1190 +Inductor, Wuerth Elektronik, Wuerth_HCM-1190, 10.5mmx11.0mm +inductor Wuerth hcm smd +0 +2 +2 +Inductor_SMD +L_Wuerth_HCM-1240 +Inductor, Wuerth Elektronik, Wuerth_HCM-1240, 10.0mmx11.8mm +inductor Wuerth hcm smd +0 +2 +2 +Inductor_SMD +L_Wuerth_HCM-1350 +Inductor, Wuerth Elektronik, Wuerth_HCM-1350, 13.5mmx13.3mm +inductor Wuerth hcm smd +0 +2 +2 +Inductor_SMD +L_Wuerth_HCM-1390 +Inductor, Wuerth Elektronik, Wuerth_HCM-1390, 12.5mmx13.0mm +inductor Wuerth hcm smd +0 +2 +2 +Inductor_SMD +L_Wuerth_HCM-7050 +Inductor, Wuerth Elektronik, Wuerth_HCM-7050, 7.2mmx7.0mm +inductor Wuerth hcm smd +0 +2 +2 +Inductor_SMD +L_Wuerth_HCM-7070 +Inductor, Wuerth Elektronik, Wuerth_HCM-7070, 7.4mmx7.2mm +inductor Wuerth hcm smd +0 +2 +2 +Inductor_SMD +L_Wuerth_MAPI-1610 +Inductor, Wuerth Elektronik, Wuerth_MAPI-1610, 1.6mmx1.6mm +inductor Wuerth smd +0 +2 +2 +Inductor_SMD +L_Wuerth_MAPI-2010 +Inductor, Wuerth Elektronik, Wuerth_MAPI-2010, 2.0mmx1.6mm +inductor Wuerth smd +0 +2 +2 +Inductor_SMD +L_Wuerth_MAPI-2506 +Inductor, Wuerth Elektronik, Wuerth_MAPI-2506, 2.5mmx2.0mm +inductor Wuerth smd +0 +2 +2 +Inductor_SMD +L_Wuerth_MAPI-2508 +Inductor, Wuerth Elektronik, Wuerth_MAPI-2508, 2.5mmx2.0mm +inductor Wuerth smd +0 +2 +2 +Inductor_SMD +L_Wuerth_MAPI-2510 +Inductor, Wuerth Elektronik, Wuerth_MAPI-2510, 2.5mmx2.0mm +inductor Wuerth smd +0 +2 +2 +Inductor_SMD +L_Wuerth_MAPI-2512 +Inductor, Wuerth Elektronik, Wuerth_MAPI-2512, 2.5mmx2.0mm +inductor Wuerth smd +0 +2 +2 +Inductor_SMD +L_Wuerth_MAPI-3010 +Inductor, Wuerth Elektronik, Wuerth_MAPI-3010, 3.0mmx3.0mm +inductor Wuerth smd +0 +2 +2 +Inductor_SMD +L_Wuerth_MAPI-3012 +Inductor, Wuerth Elektronik, Wuerth_MAPI-3012, 3.0mmx3.0mm +inductor Wuerth smd +0 +2 +2 +Inductor_SMD +L_Wuerth_MAPI-3015 +Inductor, Wuerth Elektronik, Wuerth_MAPI-3015, 3.0mmx3.0mm +inductor Wuerth smd +0 +2 +2 +Inductor_SMD +L_Wuerth_MAPI-3020 +Inductor, Wuerth Elektronik, Wuerth_MAPI-3020, 3.0mmx3.0mm +inductor Wuerth smd +0 +2 +2 +Inductor_SMD +L_Wuerth_MAPI-4020 +Inductor, Wuerth Elektronik, Wuerth_MAPI-4020, 4.0mmx4.0mm +inductor Wuerth smd +0 +2 +2 +Inductor_SMD +L_Wuerth_MAPI-4030 +Inductor, Wuerth Elektronik, Wuerth_MAPI-4030, 4.0mmx4.0mm +inductor Wuerth smd +0 +2 +2 +Inductor_SMD +L_Wuerth_WE-DD-Typ-L-Typ-XL-Typ-XXL +Shielded Coupled Inductor, Wuerth Elektronik, WE-DD, SMD, Typ L, Typ XL, Typ XXL, https://katalog.we-online.com/pbs/datasheet/744874001.pdf +Choke Coupled Double Inductor SMD Wuerth WE-DD TypL TypXL TypXXL +0 +4 +4 +Inductor_SMD +L_Wuerth_WE-DD-Typ-M-Typ-S +Shielded Coupled Inductor, Wuerth Elektronik, WE-DD, SMD, Typ M, Typ S, https://katalog.we-online.com/pbs/datasheet/744878001.pdf, https://katalog.we-online.de/pbs/datasheet/744877001.pdf +Choke Coupled Double Inductor SMD Wuerth WE-DD TypM TypS +0 +4 +4 +Inductor_SMD +L_Wuerth_WE-GF-1210 +Unshielded Inductor, Wuerth Elektronik, WE-GF, SMD, 1210, https://www.we-online.de/katalog/datasheet/74476401.pdf +Unshielded Inductor WE-GF 1210 Wuerth +0 +2 +2 +Inductor_SMD +L_Wuerth_WE-PD-Typ-7345 +Shielded Power Inductor, Wuerth Elektronik, WE-PD, SMD, 7345, https://katalog.we-online.com/pbs/datasheet/744777001.pdf +Choke Shielded Power Inductor WE-PD 7345 Wuerth +0 +2 +2 +Inductor_SMD +L_Wuerth_WE-PD-Typ-LS +Shielded Power Inductor, Wuerth Elektronik, WE-PD, SMD, Typ LS, https://katalog.we-online.com/pbs/datasheet/7447715906.pdf +Choke Shielded Power Inductor WE-PD TypLS Wuerth +0 +2 +2 +Inductor_SMD +L_Wuerth_WE-PD-Typ-LS_Handsoldering +Shielded Power Inductor, Wuerth Elektronik, WE-PD, SMD, Typ LS, Handsoldering, https://katalog.we-online.com/pbs/datasheet/7447715906.pdf +Choke Shielded Power Inductor WE-PD TypLS Wuerth +0 +2 +2 +Inductor_SMD +L_Wuerth_WE-PD-Typ-M-Typ-S +Shielded Power Inductor, Wuerth Elektronik, WE-PD, SMT, Typ M, Typ S, https://katalog.we-online.com/pbs/datasheet/744778005.pdf +Choke Shielded Power Inductor WE-PD TypM TypS Wuerth +0 +2 +2 +Inductor_SMD +L_Wuerth_WE-PD-Typ-M-Typ-S_Handsoldering +Shielded Power Inductor, Wuerth Elektronik, WE-PD, SMT, Typ M, Typ S, Handsoldering, https://katalog.we-online.com/pbs/datasheet/744778005.pdf +Choke Shielded Power Inductor WE-PD TypM TypS Wuerth +0 +2 +2 +Inductor_SMD +L_Wuerth_WE-PD2-Typ-L +Power Inductor, Wuerth Elektronik, WE-PD2, SMD, Typ L, , https://katalog.we-online.com/pbs/datasheet/74477510.pdf +Choke Power Inductor WE-PD2 TypL Wuerth +0 +2 +2 +Inductor_SMD +L_Wuerth_WE-PD2-Typ-MS +Power Inductor, Wuerth Elektronik, WE-PD2, SMD, Typ MS, https://katalog.we-online.com/pbs/datasheet/744774022.pdf +Choke Power Inductor WE-PD2 TypMS Wuerth +0 +2 +2 +Inductor_SMD +L_Wuerth_WE-PD2-Typ-XL +Power Inductor, Wuerth Elektronik, WE-PD2, SMT, Typ XL, https://katalog.we-online.com/pbs/datasheet/744776012.pdf +Choke Power Inductor WE-PD2 TypXL Wuerth +0 +2 +2 +Inductor_SMD +L_Wuerth_WE-PD4-Typ-X +Power Inductor, Wuerth Elektronik, WE-PD4, SMT, Typ X, https://katalog.we-online.de/pbs/datasheet/74458001.pdf +Choke Power Inductor WE-PD4 TypX Wuerth +0 +2 +2 +Inductor_SMD +L_Wuerth_WE-PDF +Shielded Power Inductor, Wuerth Elektronik, WE-PDF, SMD, https://katalog.we-online.de/pbs/datasheet/7447797022.pdf +Choke Shielded Power Inductor WE-PDF Wuerth +0 +2 +2 +Inductor_SMD +L_Wuerth_WE-PDF_Handsoldering +Shielded Power Inductor, Wuerth Elektronik, WE-PDF, SMD, Handsoldering, https://katalog.we-online.de/pbs/datasheet/7447797022.pdf +Choke Shielded Power Inductor WE-PDF Wuerth Handsoldering +0 +2 +2 +Inductor_SMD +L_Wuerth_WE-TPC-3816 +L_Wuerth_WE-TPC-3816 StepUp generated footprint, http://katalog.we-online.de/pbs/datasheet/7440310047.pdf +wurth wuerth smd inductor +0 +2 +2 +Inductor_SMD +L_Wuerth_WE-XHMI-8080 +Inductor, Wuerth, WE-XHMI 8080, 8.3mmx8.8mm (Script generated with StandardBox.py) (https://www.we-online.com/components/products/datasheet/74439358068.pdf) +Inductor Wuerth WE-XHMI 8080 +0 +2 +2 +Inductor_SMD +L_Wurth_WE-CAIR-5910 +WE-CAIR Air coil, https://www.we-online.com/components/products/datasheet/744918254.pdf +air coil inductor wurth we cair +0 +2 +2 +Inductor_SMD_Wurth +L_Wurth_WE-LQSH-2010 +Semi-Shielded High Saturation Power Inductor, body 2x1.6mm, https://www.we-online.com/catalog/en/WE-LQSH#/articles/WE-LQSH-2010 +SMT +0 +2 +2 +Inductor_SMD_Wurth +L_Wurth_WE-LQSH-2512 +Semi-Shielded High Saturation Power Inductor, body 2.5x2mm, https://www.we-online.com/catalog/en/WE-LQSH#/articles/WE-LQSH-2512 +SMT +0 +2 +2 +Inductor_SMD_Wurth +L_Wurth_WE-LQSH-3012 +Semi-Shielded High Saturation Power Inductor, body 3x3mm, https://www.we-online.com/catalog/en/WE-LQSH#/articles/WE-LQSH-3012 +SMT +0 +2 +2 +Inductor_SMD_Wurth +L_Wurth_WE-LQSH-4020 +Semi-Shielded High Saturation Power Inductor, body 4x4mm, https://www.we-online.com/catalog/en/WE-LQSH#/articles/WE-LQSH-4020 +SMT +0 +2 +2 +Inductor_THT +Choke_EPCOS_B82722A +Current-Compensated Ring Core Double Chokes, EPCOS, B82722A, 22.3mmx22.7mm, https://en.tdk.eu/inf/30/db/ind_2008/b82722a_j.pdf +chokes epcos tht +0 +4 +4 +Inductor_THT +Choke_Schaffner_RN102-04-14.0x14.0mm +Current-compensated Chokes, Schaffner, RN102-04, 14.0mmx14.0mm https://www.schaffner.com/products/download/product/datasheet/rn-series-common-mode-chokes-new/ +chokes schaffner tht +0 +4 +4 +Inductor_THT +Choke_Schaffner_RN112-04-17.7x17.1mm +Current-compensated Chokes, Schaffner, RN112-04, 17.7mmx17.1mm https://www.schaffner.com/fileadmin/user_upload/pim/products/datasheets/RN_series.pdf +chokes schaffner tht +0 +4 +4 +Inductor_THT +Choke_Schaffner_RN114-04-22.5x21.5mm +Current-compensated Chokes, Schaffner, RN114-04, 22.5mmx21.5mm https://www.schaffner.com/products/download/product/datasheet/rn-series-common-mode-chokes-new/ +chokes schaffner tht +0 +4 +4 +Inductor_THT +Choke_Schaffner_RN116-04-22.5x21.5mm +Current-compensated Chokes, Schaffner, RN116-04, 22.5mmx21.5mm https://www.schaffner.com/products/download/product/datasheet/rn-series-common-mode-chokes-new/ +chokes schaffner tht +0 +4 +4 +Inductor_THT +Choke_Schaffner_RN122-04-28.0x27.0mm +Current-compensated Chokes, Schaffner, RN122-04, 28.0mmx27.0mm https://www.schaffner.com/products/download/product/datasheet/rn-series-common-mode-chokes-new/ +chokes schaffner tht +0 +4 +4 +Inductor_THT +Choke_Schaffner_RN142-04-33.1x32.5mm +Current-compensated Chokes, Schaffner, RN142-04, 33.1mmx32.5mm https://www.schaffner.com/products/download/product/datasheet/rn-series-common-mode-chokes-new/ +chokes schaffner tht +0 +4 +4 +Inductor_THT +Choke_Schaffner_RN143-04-33.1x32.5mm +Current-compensated Chokes, Schaffner, RN143-04, 33.1mmx32.5mm https://www.schaffner.com/products/download/product/datasheet/rn-series-common-mode-chokes-new/ +chokes schaffner tht +0 +4 +4 +Inductor_THT +Choke_Schaffner_RN152-04-43.0x41.8mm +Current-compensated Chokes, Schaffner, RN152-04, 43.0mmx41.8mm https://www.schaffner.com/products/download/product/datasheet/rn-series-common-mode-chokes-new/ +chokes schaffner tht +0 +4 +4 +Inductor_THT +Choke_Schaffner_RN202-04-8.8x18.2mm +Current-compensated Chokes, Schaffner, RN202-04, 8.8mmx18.2mm https://www.schaffner.com/products/download/product/datasheet/rn-series-common-mode-chokes-new/ +chokes schaffner tht +0 +4 +4 +Inductor_THT +Choke_Schaffner_RN204-04-9.0x14.0mm +Current-compensated Chokes, Schaffner, RN204-04, 9.0mmx14.0mm https://www.schaffner.com/products/download/product/datasheet/rn-series-common-mode-chokes-new/ +chokes schaffner tht +0 +4 +4 +Inductor_THT +Choke_Schaffner_RN212-04-12.5x18.0mm +Current-compensated Chokes, Schaffner, RN212-04, 12.5mmx18.0mm https://www.schaffner.com/products/download/product/datasheet/rn-series-common-mode-chokes-new/ +chokes schaffner tht +0 +4 +4 +Inductor_THT +Choke_Schaffner_RN214-04-15.5x23.0mm +Current-compensated Chokes, Schaffner, RN214-04, 15.5mmx23.0mm https://www.schaffner.com/products/download/product/datasheet/rn-series-common-mode-chokes-new/ +chokes schaffner tht +0 +4 +4 +Inductor_THT +Choke_Schaffner_RN216-04-15.5x23.0mm +Current-compensated Chokes, Schaffner, RN216-04, 15.5mmx23.0mm https://www.schaffner.com/products/download/product/datasheet/rn-series-common-mode-chokes-new/ +chokes schaffner tht +0 +4 +4 +Inductor_THT +Choke_Schaffner_RN218-04-12.5x18.0mm +Current-compensated Chokes, Schaffner, RN218-04, 12.5mmx18.0mm https://www.schaffner.com/products/download/product/datasheet/rn-series-common-mode-chokes-new/ +chokes schaffner tht +0 +4 +4 +Inductor_THT +Choke_Schaffner_RN222-04-18.0x31.0mm +Current-compensated Chokes, Schaffner, RN222-04, 18.0mmx31.0mm https://www.schaffner.com/products/download/product/datasheet/rn-series-common-mode-chokes-new/ +chokes schaffner tht +0 +4 +4 +Inductor_THT +Choke_Schaffner_RN232-04-18.0x31.0mm +Current-compensated Chokes, Schaffner, RN232-04, 18.0mmx31.0mm https://www.schaffner.com/products/download/product/datasheet/rn-series-common-mode-chokes-new/ +chokes schaffner tht +0 +4 +4 +Inductor_THT +Choke_Schaffner_RN242-04-18.0x31.0mm +Current-compensated Chokes, Schaffner, RN242-04, 18.0mmx31.0mm https://www.schaffner.com/products/download/product/datasheet/rn-series-common-mode-chokes-new/ +chokes schaffner tht +0 +4 +4 +Inductor_THT +L_Axial_L5.0mm_D3.6mm_P10.00mm_Horizontal_Murata_BL01RN1A2A2 +Inductor, Murata BL01RN1A2A2, Axial, Horizontal, pin pitch=10.00mm, length*diameter=5*3.6mm, https://www.murata.com/en-global/products/productdetail?partno=BL01RN1A2A2%23 +inductor axial horizontal +0 +2 +2 +Inductor_THT +L_Axial_L5.3mm_D2.2mm_P2.54mm_Vertical_Vishay_IM-1 +Inductor, Axial series, Axial, Vertical, pin pitch=2.54mm, , length*diameter=5.3*2.2mm^2, Vishay, IM-1, http://www.vishay.com/docs/34030/im.pdf +Inductor Axial series Axial Vertical pin pitch 2.54mm length 5.3mm diameter 2.2mm Vishay IM-1 +0 +2 +2 +Inductor_THT +L_Axial_L5.3mm_D2.2mm_P7.62mm_Horizontal_Vishay_IM-1 +Inductor, Axial series, Axial, Horizontal, pin pitch=7.62mm, , length*diameter=5.3*2.2mm^2, Vishay, IM-1, http://www.vishay.com/docs/34030/im.pdf +Inductor Axial series Axial Horizontal pin pitch 7.62mm length 5.3mm diameter 2.2mm Vishay IM-1 +0 +2 +2 +Inductor_THT +L_Axial_L5.3mm_D2.2mm_P10.16mm_Horizontal_Vishay_IM-1 +Inductor, Axial series, Axial, Horizontal, pin pitch=10.16mm, , length*diameter=5.3*2.2mm^2, Vishay, IM-1, http://www.vishay.com/docs/34030/im.pdf +Inductor Axial series Axial Horizontal pin pitch 10.16mm length 5.3mm diameter 2.2mm Vishay IM-1 +0 +2 +2 +Inductor_THT +L_Axial_L6.6mm_D2.7mm_P2.54mm_Vertical_Vishay_IM-2 +Inductor, Axial series, Axial, Vertical, pin pitch=2.54mm, , length*diameter=6.6*2.7mm^2, Vishay, IM-2, http://www.vishay.com/docs/34030/im.pdf +Inductor Axial series Axial Vertical pin pitch 2.54mm length 6.6mm diameter 2.7mm Vishay IM-2 +0 +2 +2 +Inductor_THT +L_Axial_L6.6mm_D2.7mm_P10.16mm_Horizontal_Vishay_IM-2 +Inductor, Axial series, Axial, Horizontal, pin pitch=10.16mm, , length*diameter=6.6*2.7mm^2, Vishay, IM-2, http://www.vishay.com/docs/34030/im.pdf +Inductor Axial series Axial Horizontal pin pitch 10.16mm length 6.6mm diameter 2.7mm Vishay IM-2 +0 +2 +2 +Inductor_THT +L_Axial_L7.0mm_D3.3mm_P2.54mm_Vertical_Fastron_MICC +Inductor, Axial series, Axial, Vertical, pin pitch=2.54mm, , length*diameter=7*3.3mm^2, Fastron, MICC, http://www.fastrongroup.com/image-show/70/MICC.pdf?type=Complete-DataSheet&productType=series +Inductor Axial series Axial Vertical pin pitch 2.54mm length 7mm diameter 3.3mm Fastron MICC +0 +2 +2 +Inductor_THT +L_Axial_L7.0mm_D3.3mm_P5.08mm_Vertical_Fastron_MICC +Inductor, Axial series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=7*3.3mm^2, Fastron, MICC, http://www.fastrongroup.com/image-show/70/MICC.pdf?type=Complete-DataSheet&productType=series +Inductor Axial series Axial Vertical pin pitch 5.08mm length 7mm diameter 3.3mm Fastron MICC +0 +2 +2 +Inductor_THT +L_Axial_L7.0mm_D3.3mm_P10.16mm_Horizontal_Fastron_MICC +Inductor, Axial series, Axial, Horizontal, pin pitch=10.16mm, , length*diameter=7*3.3mm^2, Fastron, MICC, http://www.fastrongroup.com/image-show/70/MICC.pdf?type=Complete-DataSheet&productType=series +Inductor Axial series Axial Horizontal pin pitch 10.16mm length 7mm diameter 3.3mm Fastron MICC +0 +2 +2 +Inductor_THT +L_Axial_L7.0mm_D3.3mm_P12.70mm_Horizontal_Fastron_MICC +Inductor, Axial series, Axial, Horizontal, pin pitch=12.7mm, , length*diameter=7*3.3mm^2, Fastron, MICC, http://www.fastrongroup.com/image-show/70/MICC.pdf?type=Complete-DataSheet&productType=series +Inductor Axial series Axial Horizontal pin pitch 12.7mm length 7mm diameter 3.3mm Fastron MICC +0 +2 +2 +Inductor_THT +L_Axial_L9.5mm_D4.0mm_P2.54mm_Vertical_Fastron_SMCC +Inductor, Axial series, Axial, Vertical, pin pitch=2.54mm, , length*diameter=9.5*4mm^2, Fastron, SMCC, http://cdn-reichelt.de/documents/datenblatt/B400/DS_SMCC_NEU.pdf, http://cdn-reichelt.de/documents/datenblatt/B400/LEADEDINDUCTORS.pdf +Inductor Axial series Axial Vertical pin pitch 2.54mm length 9.5mm diameter 4mm Fastron SMCC +0 +2 +2 +Inductor_THT +L_Axial_L9.5mm_D4.0mm_P5.08mm_Vertical_Fastron_SMCC +Inductor, Axial series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=9.5*4mm^2, Fastron, SMCC, http://cdn-reichelt.de/documents/datenblatt/B400/DS_SMCC_NEU.pdf, http://cdn-reichelt.de/documents/datenblatt/B400/LEADEDINDUCTORS.pdf +Inductor Axial series Axial Vertical pin pitch 5.08mm length 9.5mm diameter 4mm Fastron SMCC +0 +2 +2 +Inductor_THT +L_Axial_L9.5mm_D4.0mm_P12.70mm_Horizontal_Fastron_SMCC +Inductor, Axial series, Axial, Horizontal, pin pitch=12.7mm, , length*diameter=9.5*4mm^2, Fastron, SMCC, http://cdn-reichelt.de/documents/datenblatt/B400/DS_SMCC_NEU.pdf, http://cdn-reichelt.de/documents/datenblatt/B400/LEADEDINDUCTORS.pdf +Inductor Axial series Axial Horizontal pin pitch 12.7mm length 9.5mm diameter 4mm Fastron SMCC +0 +2 +2 +Inductor_THT +L_Axial_L9.5mm_D4.0mm_P15.24mm_Horizontal_Fastron_SMCC +Inductor, Axial series, Axial, Horizontal, pin pitch=15.24mm, , length*diameter=9.5*4mm^2, Fastron, SMCC, http://cdn-reichelt.de/documents/datenblatt/B400/DS_SMCC_NEU.pdf, http://cdn-reichelt.de/documents/datenblatt/B400/LEADEDINDUCTORS.pdf +Inductor Axial series Axial Horizontal pin pitch 15.24mm length 9.5mm diameter 4mm Fastron SMCC +0 +2 +2 +Inductor_THT +L_Axial_L11.0mm_D4.5mm_P5.08mm_Vertical_Fastron_MECC +Inductor, Axial series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=11*4.5mm^2, Fastron, MECC, http://www.fastrongroup.com/image-show/21/MECC.pdf?type=Complete-DataSheet&productType=series +Inductor Axial series Axial Vertical pin pitch 5.08mm length 11mm diameter 4.5mm Fastron MECC +0 +2 +2 +Inductor_THT +L_Axial_L11.0mm_D4.5mm_P7.62mm_Vertical_Fastron_MECC +Inductor, Axial series, Axial, Vertical, pin pitch=7.62mm, , length*diameter=11*4.5mm^2, Fastron, MECC, http://www.fastrongroup.com/image-show/21/MECC.pdf?type=Complete-DataSheet&productType=series +Inductor Axial series Axial Vertical pin pitch 7.62mm length 11mm diameter 4.5mm Fastron MECC +0 +2 +2 +Inductor_THT +L_Axial_L11.0mm_D4.5mm_P15.24mm_Horizontal_Fastron_MECC +Inductor, Axial series, Axial, Horizontal, pin pitch=15.24mm, , length*diameter=11*4.5mm^2, Fastron, MECC, http://www.fastrongroup.com/image-show/21/MECC.pdf?type=Complete-DataSheet&productType=series +Inductor Axial series Axial Horizontal pin pitch 15.24mm length 11mm diameter 4.5mm Fastron MECC +0 +2 +2 +Inductor_THT +L_Axial_L12.0mm_D5.0mm_P5.08mm_Vertical_Fastron_MISC +Inductor, Axial series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=12*5mm^2, Fastron, MISC, http://cdn-reichelt.de/documents/datenblatt/B400/DS_MISC.pdf +Inductor Axial series Axial Vertical pin pitch 5.08mm length 12mm diameter 5mm Fastron MISC +0 +2 +2 +Inductor_THT +L_Axial_L12.0mm_D5.0mm_P7.62mm_Vertical_Fastron_MISC +Inductor, Axial series, Axial, Vertical, pin pitch=7.62mm, , length*diameter=12*5mm^2, Fastron, MISC, http://cdn-reichelt.de/documents/datenblatt/B400/DS_MISC.pdf +Inductor Axial series Axial Vertical pin pitch 7.62mm length 12mm diameter 5mm Fastron MISC +0 +2 +2 +Inductor_THT +L_Axial_L12.0mm_D5.0mm_P15.24mm_Horizontal_Fastron_MISC +Inductor, Axial series, Axial, Horizontal, pin pitch=15.24mm, , length*diameter=12*5mm^2, Fastron, MISC, http://cdn-reichelt.de/documents/datenblatt/B400/DS_MISC.pdf +Inductor Axial series Axial Horizontal pin pitch 15.24mm length 12mm diameter 5mm Fastron MISC +0 +2 +2 +Inductor_THT +L_Axial_L12.8mm_D5.8mm_P5.08mm_Vertical_Fastron_HBCC +Inductor, Axial series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=12.8*5.8mm^2, Fastron, HBCC, http://www.fastrongroup.com/image-show/18/HBCC.pdf?type=Complete-DataSheet&productType=series +Inductor Axial series Axial Vertical pin pitch 5.08mm length 12.8mm diameter 5.8mm Fastron HBCC +0 +2 +2 +Inductor_THT +L_Axial_L12.8mm_D5.8mm_P7.62mm_Vertical_Fastron_HBCC +Inductor, Axial series, Axial, Vertical, pin pitch=7.62mm, , length*diameter=12.8*5.8mm^2, Fastron, HBCC, http://www.fastrongroup.com/image-show/18/HBCC.pdf?type=Complete-DataSheet&productType=series +Inductor Axial series Axial Vertical pin pitch 7.62mm length 12.8mm diameter 5.8mm Fastron HBCC +0 +2 +2 +Inductor_THT +L_Axial_L12.8mm_D5.8mm_P20.32mm_Horizontal_Fastron_HBCC +Inductor, Axial series, Axial, Horizontal, pin pitch=20.32mm, , length*diameter=12.8*5.8mm^2, Fastron, HBCC, http://www.fastrongroup.com/image-show/18/HBCC.pdf?type=Complete-DataSheet&productType=series +Inductor Axial series Axial Horizontal pin pitch 20.32mm length 12.8mm diameter 5.8mm Fastron HBCC +0 +2 +2 +Inductor_THT +L_Axial_L12.8mm_D5.8mm_P25.40mm_Horizontal_Fastron_HBCC +Inductor, Axial series, Axial, Horizontal, pin pitch=25.4mm, , length*diameter=12.8*5.8mm^2, Fastron, HBCC, http://www.fastrongroup.com/image-show/18/HBCC.pdf?type=Complete-DataSheet&productType=series +Inductor Axial series Axial Horizontal pin pitch 25.4mm length 12.8mm diameter 5.8mm Fastron HBCC +0 +2 +2 +Inductor_THT +L_Axial_L13.0mm_D4.5mm_P5.08mm_Vertical_Fastron_HCCC +Inductor, Axial series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=13*4.5mm^2, Fastron, HCCC, http://www.fastrongroup.com/image-show/19/HCCC.pdf?type=Complete-DataSheet&productType=series +Inductor Axial series Axial Vertical pin pitch 5.08mm length 13mm diameter 4.5mm Fastron HCCC +0 +2 +2 +Inductor_THT +L_Axial_L13.0mm_D4.5mm_P7.62mm_Vertical_Fastron_HCCC +Inductor, Axial series, Axial, Vertical, pin pitch=7.62mm, , length*diameter=13*4.5mm^2, Fastron, HCCC, http://www.fastrongroup.com/image-show/19/HCCC.pdf?type=Complete-DataSheet&productType=series +Inductor Axial series Axial Vertical pin pitch 7.62mm length 13mm diameter 4.5mm Fastron HCCC +0 +2 +2 +Inductor_THT +L_Axial_L13.0mm_D4.5mm_P15.24mm_Horizontal_Fastron_HCCC +Inductor, Axial series, Axial, Horizontal, pin pitch=15.24mm, , length*diameter=13*4.5mm^2, Fastron, HCCC, http://www.fastrongroup.com/image-show/19/HCCC.pdf?type=Complete-DataSheet&productType=series +Inductor Axial series Axial Horizontal pin pitch 15.24mm length 13mm diameter 4.5mm Fastron HCCC +0 +2 +2 +Inductor_THT +L_Axial_L14.0mm_D4.5mm_P5.08mm_Vertical_Fastron_LACC +Inductor, Axial series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=14*4.5mm^2, Fastron, LACC, http://www.fastrongroup.com/image-show/20/LACC.pdf?type=Complete-DataSheet&productType=series +Inductor Axial series Axial Vertical pin pitch 5.08mm length 14mm diameter 4.5mm Fastron LACC +0 +2 +2 +Inductor_THT +L_Axial_L14.0mm_D4.5mm_P7.62mm_Vertical_Fastron_LACC +Inductor, Axial series, Axial, Vertical, pin pitch=7.62mm, , length*diameter=14*4.5mm^2, Fastron, LACC, http://www.fastrongroup.com/image-show/20/LACC.pdf?type=Complete-DataSheet&productType=series +Inductor Axial series Axial Vertical pin pitch 7.62mm length 14mm diameter 4.5mm Fastron LACC +0 +2 +2 +Inductor_THT +L_Axial_L14.0mm_D4.5mm_P15.24mm_Horizontal_Fastron_LACC +Inductor, Axial series, Axial, Horizontal, pin pitch=15.24mm, , length*diameter=14*4.5mm^2, Fastron, LACC, http://www.fastrongroup.com/image-show/20/LACC.pdf?type=Complete-DataSheet&productType=series +Inductor Axial series Axial Horizontal pin pitch 15.24mm length 14mm diameter 4.5mm Fastron LACC +0 +2 +2 +Inductor_THT +L_Axial_L14.5mm_D5.8mm_P5.08mm_Vertical_Fastron_HBCC +Inductor, Axial series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=14.5*5.8mm^2, Fastron, HBCC, http://www.fastrongroup.com/image-show/18/HBCC.pdf?type=Complete-DataSheet&productType=series +Inductor Axial series Axial Vertical pin pitch 5.08mm length 14.5mm diameter 5.8mm Fastron HBCC +0 +2 +2 +Inductor_THT +L_Axial_L14.5mm_D5.8mm_P7.62mm_Vertical_Fastron_HBCC +Inductor, Axial series, Axial, Vertical, pin pitch=7.62mm, , length*diameter=14.5*5.8mm^2, Fastron, HBCC, http://www.fastrongroup.com/image-show/18/HBCC.pdf?type=Complete-DataSheet&productType=series +Inductor Axial series Axial Vertical pin pitch 7.62mm length 14.5mm diameter 5.8mm Fastron HBCC +0 +2 +2 +Inductor_THT +L_Axial_L14.5mm_D5.8mm_P20.32mm_Horizontal_Fastron_HBCC +Inductor, Axial series, Axial, Horizontal, pin pitch=20.32mm, , length*diameter=14.5*5.8mm^2, Fastron, HBCC, http://www.fastrongroup.com/image-show/18/HBCC.pdf?type=Complete-DataSheet&productType=series +Inductor Axial series Axial Horizontal pin pitch 20.32mm length 14.5mm diameter 5.8mm Fastron HBCC +0 +2 +2 +Inductor_THT +L_Axial_L14.5mm_D5.8mm_P25.40mm_Horizontal_Fastron_HBCC +Inductor, Axial series, Axial, Horizontal, pin pitch=25.4mm, , length*diameter=14.5*5.8mm^2, Fastron, HBCC, http://www.fastrongroup.com/image-show/18/HBCC.pdf?type=Complete-DataSheet&productType=series +Inductor Axial series Axial Horizontal pin pitch 25.4mm length 14.5mm diameter 5.8mm Fastron HBCC +0 +2 +2 +Inductor_THT +L_Axial_L16.0mm_D6.3mm_P5.08mm_Vertical_Fastron_VHBCC +Inductor, Axial series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=16*6.3mm^2, Fastron, VHBCC, http://www.fastrongroup.com/image-show/25/VHBCC.pdf?type=Complete-DataSheet&productType=series +Inductor Axial series Axial Vertical pin pitch 5.08mm length 16mm diameter 6.3mm Fastron VHBCC +0 +2 +2 +Inductor_THT +L_Axial_L16.0mm_D6.3mm_P7.62mm_Vertical_Fastron_VHBCC +Inductor, Axial series, Axial, Vertical, pin pitch=7.62mm, , length*diameter=16*6.3mm^2, Fastron, VHBCC, http://www.fastrongroup.com/image-show/25/VHBCC.pdf?type=Complete-DataSheet&productType=series +Inductor Axial series Axial Vertical pin pitch 7.62mm length 16mm diameter 6.3mm Fastron VHBCC +0 +2 +2 +Inductor_THT +L_Axial_L16.0mm_D6.3mm_P20.32mm_Horizontal_Fastron_VHBCC +Inductor, Axial series, Axial, Horizontal, pin pitch=20.32mm, , length*diameter=16*6.3mm^2, Fastron, VHBCC, http://www.fastrongroup.com/image-show/25/VHBCC.pdf?type=Complete-DataSheet&productType=series +Inductor Axial series Axial Horizontal pin pitch 20.32mm length 16mm diameter 6.3mm Fastron VHBCC +0 +2 +2 +Inductor_THT +L_Axial_L16.0mm_D6.3mm_P25.40mm_Horizontal_Fastron_VHBCC +Inductor, Axial series, Axial, Horizontal, pin pitch=25.4mm, , length*diameter=16*6.3mm^2, Fastron, VHBCC, http://www.fastrongroup.com/image-show/25/VHBCC.pdf?type=Complete-DataSheet&productType=series +Inductor Axial series Axial Horizontal pin pitch 25.4mm length 16mm diameter 6.3mm Fastron VHBCC +0 +2 +2 +Inductor_THT +L_Axial_L16.0mm_D7.5mm_P5.08mm_Vertical_Fastron_XHBCC +Inductor, Axial series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=16*7.5mm^2, Fastron, XHBCC, http://www.fastrongroup.com/image-show/26/XHBCC.pdf?type=Complete-DataSheet&productType=series +Inductor Axial series Axial Vertical pin pitch 5.08mm length 16mm diameter 7.5mm Fastron XHBCC +0 +2 +2 +Inductor_THT +L_Axial_L16.0mm_D7.5mm_P7.62mm_Vertical_Fastron_XHBCC +Inductor, Axial series, Axial, Vertical, pin pitch=7.62mm, , length*diameter=16*7.5mm^2, Fastron, XHBCC, http://www.fastrongroup.com/image-show/26/XHBCC.pdf?type=Complete-DataSheet&productType=series +Inductor Axial series Axial Vertical pin pitch 7.62mm length 16mm diameter 7.5mm Fastron XHBCC +0 +2 +2 +Inductor_THT +L_Axial_L16.0mm_D7.5mm_P20.32mm_Horizontal_Fastron_XHBCC +Inductor, Axial series, Axial, Horizontal, pin pitch=20.32mm, , length*diameter=16*7.5mm^2, Fastron, XHBCC, http://www.fastrongroup.com/image-show/26/XHBCC.pdf?type=Complete-DataSheet&productType=series +Inductor Axial series Axial Horizontal pin pitch 20.32mm length 16mm diameter 7.5mm Fastron XHBCC +0 +2 +2 +Inductor_THT +L_Axial_L16.0mm_D7.5mm_P25.40mm_Horizontal_Fastron_XHBCC +Inductor, Axial series, Axial, Horizontal, pin pitch=25.4mm, , length*diameter=16*7.5mm^2, Fastron, XHBCC, http://www.fastrongroup.com/image-show/26/XHBCC.pdf?type=Complete-DataSheet&productType=series +Inductor Axial series Axial Horizontal pin pitch 25.4mm length 16mm diameter 7.5mm Fastron XHBCC +0 +2 +2 +Inductor_THT +L_Axial_L16.0mm_D9.5mm_P5.08mm_Vertical_Vishay_IM-10-37 +Inductor, Axial series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=16*9.5mm^2, Vishay, IM-10-37, http://www.vishay.com/docs/34030/im10.pdf +Inductor Axial series Axial Vertical pin pitch 5.08mm length 16mm diameter 9.5mm Vishay IM-10-37 +0 +2 +2 +Inductor_THT +L_Axial_L16.0mm_D9.5mm_P20.32mm_Horizontal_Vishay_IM-10-37 +Inductor, Axial series, Axial, Horizontal, pin pitch=20.32mm, , length*diameter=16*9.5mm^2, Vishay, IM-10-37, http://www.vishay.com/docs/34030/im10.pdf +Inductor Axial series Axial Horizontal pin pitch 20.32mm length 16mm diameter 9.5mm Vishay IM-10-37 +0 +2 +2 +Inductor_THT +L_Axial_L17.5mm_D12.0mm_P7.62mm_Vertical_Vishay_IM-10-46 +Inductor, Axial series, Axial, Vertical, pin pitch=7.62mm, , length*diameter=17.5*12mm^2, Vishay, IM-10-46, http://www.vishay.com/docs/34030/im10.pdf +Inductor Axial series Axial Vertical pin pitch 7.62mm length 17.5mm diameter 12mm Vishay IM-10-46 +0 +2 +2 +Inductor_THT +L_Axial_L17.5mm_D12.0mm_P20.32mm_Horizontal_Vishay_IM-10-46 +Inductor, Axial series, Axial, Horizontal, pin pitch=20.32mm, , length*diameter=17.5*12mm^2, Vishay, IM-10-46, http://www.vishay.com/docs/34030/im10.pdf +Inductor Axial series Axial Horizontal pin pitch 20.32mm length 17.5mm diameter 12mm Vishay IM-10-46 +0 +2 +2 +Inductor_THT +L_Axial_L20.0mm_D8.0mm_P5.08mm_Vertical +Inductor, Axial series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=20*8mm^2 +Inductor Axial series Axial Vertical pin pitch 5.08mm length 20mm diameter 8mm +0 +2 +2 +Inductor_THT +L_Axial_L20.0mm_D8.0mm_P7.62mm_Vertical +Inductor, Axial series, Axial, Vertical, pin pitch=7.62mm, , length*diameter=20*8mm^2 +Inductor Axial series Axial Vertical pin pitch 7.62mm length 20mm diameter 8mm +0 +2 +2 +Inductor_THT +L_Axial_L20.0mm_D8.0mm_P25.40mm_Horizontal +Inductor, Axial series, Axial, Horizontal, pin pitch=25.4mm, , length*diameter=20*8mm^2 +Inductor Axial series Axial Horizontal pin pitch 25.4mm length 20mm diameter 8mm +0 +2 +2 +Inductor_THT +L_Axial_L20.3mm_D12.1mm_P7.62mm_Vertical_Vishay_IHA-101 +Inductor, Axial series, Axial, Vertical, pin pitch=7.62mm, , length*diameter=20.32*12.07mm^2, Vishay, IHA-101, http://www.vishay.com/docs/34014/iha.pdf +Inductor Axial series Axial Vertical pin pitch 7.62mm length 20.32mm diameter 12.07mm Vishay IHA-101 +0 +2 +2 +Inductor_THT +L_Axial_L20.3mm_D12.1mm_P28.50mm_Horizontal_Vishay_IHA-101 +Inductor, Axial series, Axial, Horizontal, pin pitch=28.5mm, , length*diameter=20.32*12.07mm^2, Vishay, IHA-101, http://www.vishay.com/docs/34014/iha.pdf +Inductor Axial series Axial Horizontal pin pitch 28.5mm length 20.32mm diameter 12.07mm Vishay IHA-101 +0 +2 +2 +Inductor_THT +L_Axial_L20.3mm_D12.7mm_P7.62mm_Vertical_Vishay_IHA-201 +Inductor, Axial series, Axial, Vertical, pin pitch=7.62mm, , length*diameter=20.32*12.7mm^2, Vishay, IHA-201, http://www.vishay.com/docs/34014/iha.pdf +Inductor Axial series Axial Vertical pin pitch 7.62mm length 20.32mm diameter 12.7mm Vishay IHA-201 +0 +2 +2 +Inductor_THT +L_Axial_L20.3mm_D12.7mm_P25.40mm_Horizontal_Vishay_IHA-201 +Inductor, Axial series, Axial, Horizontal, pin pitch=25.4mm, , length*diameter=20.32*12.7mm^2, Vishay, IHA-201, http://www.vishay.com/docs/34014/iha.pdf +Inductor Axial series Axial Horizontal pin pitch 25.4mm length 20.32mm diameter 12.7mm Vishay IHA-201 +0 +2 +2 +Inductor_THT +L_Axial_L23.4mm_D12.7mm_P7.62mm_Vertical_Vishay_IHA-203 +Inductor, Axial series, Axial, Vertical, pin pitch=7.62mm, , length*diameter=23.37*12.7mm^2, Vishay, IHA-203, http://www.vishay.com/docs/34014/iha.pdf +Inductor Axial series Axial Vertical pin pitch 7.62mm length 23.37mm diameter 12.7mm Vishay IHA-203 +0 +2 +2 +Inductor_THT +L_Axial_L23.4mm_D12.7mm_P32.00mm_Horizontal_Vishay_IHA-203 +Inductor, Axial series, Axial, Horizontal, pin pitch=32mm, , length*diameter=23.37*12.7mm^2, Vishay, IHA-203, http://www.vishay.com/docs/34014/iha.pdf +Inductor Axial series Axial Horizontal pin pitch 32mm length 23.37mm diameter 12.7mm Vishay IHA-203 +0 +2 +2 +Inductor_THT +L_Axial_L24.0mm_D7.1mm_P5.08mm_Vertical_Vishay_IM-10-28 +Inductor, Axial series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=24*7.1mm^2, Vishay, IM-10-28, http://www.vishay.com/docs/34035/im10.pdf +Inductor Axial series Axial Vertical pin pitch 5.08mm length 24mm diameter 7.1mm Vishay IM-10-28 +0 +2 +2 +Inductor_THT +L_Axial_L24.0mm_D7.1mm_P30.48mm_Horizontal_Vishay_IM-10-28 +Inductor, Axial series, Axial, Horizontal, pin pitch=30.48mm, , length*diameter=24*7.1mm^2, Vishay, IM-10-28, http://www.vishay.com/docs/34035/im10.pdf +Inductor Axial series Axial Horizontal pin pitch 30.48mm length 24mm diameter 7.1mm Vishay IM-10-28 +0 +2 +2 +Inductor_THT +L_Axial_L24.0mm_D7.5mm_P5.08mm_Vertical_Fastron_MESC +Inductor, Axial series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=24*7.5mm^2, Fastron, MESC, http://cdn-reichelt.de/documents/datenblatt/B400/DS_MESC.pdf +Inductor Axial series Axial Vertical pin pitch 5.08mm length 24mm diameter 7.5mm Fastron MESC +0 +2 +2 +Inductor_THT +L_Axial_L24.0mm_D7.5mm_P7.62mm_Vertical_Fastron_MESC +Inductor, Axial series, Axial, Vertical, pin pitch=7.62mm, , length*diameter=24*7.5mm^2, Fastron, MESC, http://cdn-reichelt.de/documents/datenblatt/B400/DS_MESC.pdf +Inductor Axial series Axial Vertical pin pitch 7.62mm length 24mm diameter 7.5mm Fastron MESC +0 +2 +2 +Inductor_THT +L_Axial_L24.0mm_D7.5mm_P27.94mm_Horizontal_Fastron_MESC +Inductor, Axial series, Axial, Horizontal, pin pitch=27.94mm, , length*diameter=24*7.5mm^2, Fastron, MESC, http://cdn-reichelt.de/documents/datenblatt/B400/DS_MESC.pdf +Inductor Axial series Axial Horizontal pin pitch 27.94mm length 24mm diameter 7.5mm Fastron MESC +0 +2 +2 +Inductor_THT +L_Axial_L26.0mm_D9.0mm_P5.08mm_Vertical_Fastron_77A +Inductor, Axial series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=26*9mm^2, Fastron, 77A, http://cdn-reichelt.de/documents/datenblatt/B400/DS_77A.pdf +Inductor Axial series Axial Vertical pin pitch 5.08mm length 26mm diameter 9mm Fastron 77A +0 +2 +2 +Inductor_THT +L_Axial_L26.0mm_D9.0mm_P7.62mm_Vertical_Fastron_77A +Inductor, Axial series, Axial, Vertical, pin pitch=7.62mm, , length*diameter=26*9mm^2, Fastron, 77A, http://cdn-reichelt.de/documents/datenblatt/B400/DS_77A.pdf +Inductor Axial series Axial Vertical pin pitch 7.62mm length 26mm diameter 9mm Fastron 77A +0 +2 +2 +Inductor_THT +L_Axial_L26.0mm_D9.0mm_P30.48mm_Horizontal_Fastron_77A +Inductor, Axial series, Axial, Horizontal, pin pitch=30.48mm, , length*diameter=26*9mm^2, Fastron, 77A, http://cdn-reichelt.de/documents/datenblatt/B400/DS_77A.pdf +Inductor Axial series Axial Horizontal pin pitch 30.48mm length 26mm diameter 9mm Fastron 77A +0 +2 +2 +Inductor_THT +L_Axial_L26.0mm_D10.0mm_P5.08mm_Vertical_Fastron_77A +Inductor, Axial series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=26*10mm^2, Fastron, 77A, http://cdn-reichelt.de/documents/datenblatt/B400/DS_77A.pdf +Inductor Axial series Axial Vertical pin pitch 5.08mm length 26mm diameter 10mm Fastron 77A +0 +2 +2 +Inductor_THT +L_Axial_L26.0mm_D10.0mm_P7.62mm_Vertical_Fastron_77A +Inductor, Axial series, Axial, Vertical, pin pitch=7.62mm, , length*diameter=26*10mm^2, Fastron, 77A, http://cdn-reichelt.de/documents/datenblatt/B400/DS_77A.pdf +Inductor Axial series Axial Vertical pin pitch 7.62mm length 26mm diameter 10mm Fastron 77A +0 +2 +2 +Inductor_THT +L_Axial_L26.0mm_D10.0mm_P30.48mm_Horizontal_Fastron_77A +Inductor, Axial series, Axial, Horizontal, pin pitch=30.48mm, , length*diameter=26*10mm^2, Fastron, 77A, http://cdn-reichelt.de/documents/datenblatt/B400/DS_77A.pdf +Inductor Axial series Axial Horizontal pin pitch 30.48mm length 26mm diameter 10mm Fastron 77A +0 +2 +2 +Inductor_THT +L_Axial_L26.0mm_D11.0mm_P5.08mm_Vertical_Fastron_77A +Inductor, Axial series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=26*11mm^2, Fastron, 77A, http://cdn-reichelt.de/documents/datenblatt/B400/DS_77A.pdf +Inductor Axial series Axial Vertical pin pitch 5.08mm length 26mm diameter 11mm Fastron 77A +0 +2 +2 +Inductor_THT +L_Axial_L26.0mm_D11.0mm_P7.62mm_Vertical_Fastron_77A +Inductor, Axial series, Axial, Vertical, pin pitch=7.62mm, , length*diameter=26*11mm^2, Fastron, 77A, http://cdn-reichelt.de/documents/datenblatt/B400/DS_77A.pdf +Inductor Axial series Axial Vertical pin pitch 7.62mm length 26mm diameter 11mm Fastron 77A +0 +2 +2 +Inductor_THT +L_Axial_L26.0mm_D11.0mm_P30.48mm_Horizontal_Fastron_77A +Inductor, Axial series, Axial, Horizontal, pin pitch=30.48mm, , length*diameter=26*11mm^2, Fastron, 77A, http://cdn-reichelt.de/documents/datenblatt/B400/DS_77A.pdf +Inductor Axial series Axial Horizontal pin pitch 30.48mm length 26mm diameter 11mm Fastron 77A +0 +2 +2 +Inductor_THT +L_Axial_L26.7mm_D12.1mm_P7.62mm_Vertical_Vishay_IHA-103 +Inductor, Axial series, Axial, Vertical, pin pitch=7.62mm, , length*diameter=26.67*12.07mm^2, Vishay, IHA-103, http://www.vishay.com/docs/34014/iha.pdf +Inductor Axial series Axial Vertical pin pitch 7.62mm length 26.67mm diameter 12.07mm Vishay IHA-103 +0 +2 +2 +Inductor_THT +L_Axial_L26.7mm_D12.1mm_P35.00mm_Horizontal_Vishay_IHA-103 +Inductor, Axial series, Axial, Horizontal, pin pitch=35mm, , length*diameter=26.67*12.07mm^2, Vishay, IHA-103, http://www.vishay.com/docs/34014/iha.pdf +Inductor Axial series Axial Horizontal pin pitch 35mm length 26.67mm diameter 12.07mm Vishay IHA-103 +0 +2 +2 +Inductor_THT +L_Axial_L26.7mm_D14.0mm_P7.62mm_Vertical_Vishay_IHA-104 +Inductor, Axial series, Axial, Vertical, pin pitch=7.62mm, , length*diameter=26.67*13.97mm^2, Vishay, IHA-104, http://www.vishay.com/docs/34014/iha.pdf +Inductor Axial series Axial Vertical pin pitch 7.62mm length 26.67mm diameter 13.97mm Vishay IHA-104 +0 +2 +2 +Inductor_THT +L_Axial_L26.7mm_D14.0mm_P35.00mm_Horizontal_Vishay_IHA-104 +Inductor, Axial series, Axial, Horizontal, pin pitch=35mm, , length*diameter=26.67*13.97mm^2, Vishay, IHA-104, http://www.vishay.com/docs/34014/iha.pdf +Inductor Axial series Axial Horizontal pin pitch 35mm length 26.67mm diameter 13.97mm Vishay IHA-104 +0 +2 +2 +Inductor_THT +L_Axial_L29.9mm_D14.0mm_P7.62mm_Vertical_Vishay_IHA-105 +Inductor, Axial series, Axial, Vertical, pin pitch=7.62mm, , length*diameter=29.85*13.97mm^2, Vishay, IHA-105, http://www.vishay.com/docs/34014/iha.pdf +Inductor Axial series Axial Vertical pin pitch 7.62mm length 29.85mm diameter 13.97mm Vishay IHA-105 +0 +2 +2 +Inductor_THT +L_Axial_L29.9mm_D14.0mm_P38.00mm_Horizontal_Vishay_IHA-105 +Inductor, Axial series, Axial, Horizontal, pin pitch=38mm, , length*diameter=29.85*13.97mm^2, Vishay, IHA-105, http://www.vishay.com/docs/34014/iha.pdf +Inductor Axial series Axial Horizontal pin pitch 38mm length 29.85mm diameter 13.97mm Vishay IHA-105 +0 +2 +2 +Inductor_THT +L_Axial_L30.0mm_D8.0mm_P5.08mm_Vertical_Fastron_77A +Inductor, Axial series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=30*8mm^2, Fastron, 77A, http://cdn-reichelt.de/documents/datenblatt/B400/DS_77A.pdf +Inductor Axial series Axial Vertical pin pitch 5.08mm length 30mm diameter 8mm Fastron 77A +0 +2 +2 +Inductor_THT +L_Axial_L30.0mm_D8.0mm_P7.62mm_Vertical_Fastron_77A +Inductor, Axial series, Axial, Vertical, pin pitch=7.62mm, , length*diameter=30*8mm^2, Fastron, 77A, http://cdn-reichelt.de/documents/datenblatt/B400/DS_77A.pdf +Inductor Axial series Axial Vertical pin pitch 7.62mm length 30mm diameter 8mm Fastron 77A +0 +2 +2 +Inductor_THT +L_Axial_L30.0mm_D8.0mm_P35.56mm_Horizontal_Fastron_77A +Inductor, Axial series, Axial, Horizontal, pin pitch=35.56mm, , length*diameter=30*8mm^2, Fastron, 77A, http://cdn-reichelt.de/documents/datenblatt/B400/DS_77A.pdf +Inductor Axial series Axial Horizontal pin pitch 35.56mm length 30mm diameter 8mm Fastron 77A +0 +2 +2 +Inductor_THT +L_CommonMode_PulseElectronics_PH9455x105NL_1 +common mode, inductor, filter, https://productfinder.pulseelectronics.com/api/open/product-attachments/datasheet/ph9455.105nl +cmode choke dual +0 +4 +4 +Inductor_THT +L_CommonMode_PulseElectronics_PH9455x155NL_1 +common mode, inductor, filter, https://productfinder.pulseelectronics.com/api/open/product-attachments/datasheet/ph9455.105nl +cmode choke dual +0 +4 +4 +Inductor_THT +L_CommonMode_PulseElectronics_PH9455x205NL_1 +common mode, inductor, filter, https://productfinder.pulseelectronics.com/api/open/product-attachments/datasheet/ph9455.105nl +cmode choke dual +0 +4 +4 +Inductor_THT +L_CommonMode_PulseElectronics_PH9455x405NL_1 +common mode, inductor, filter, https://productfinder.pulseelectronics.com/api/open/product-attachments/datasheet/ph9455.105nl +cmode choke dual +0 +4 +4 +Inductor_THT +L_CommonMode_PulseElectronics_PH9455x705NL_1 +common mode, inductor, filter, https://productfinder.pulseelectronics.com/api/open/product-attachments/datasheet/ph9455.105nl +cmode choke dual +0 +4 +4 +Inductor_THT +L_CommonMode_PulseElectronics_PH9455xxx6NL_2 +common mode, inductor, filter, https://productfinder.pulseelectronics.com/api/open/product-attachments/datasheet/ph9455.105nl +cmode choke dual +0 +4 +4 +Inductor_THT +L_CommonMode_TDK_B82746S4143A040 +13A, 3Phase, Triple Coil, CM Choke, https://www.tdk-electronics.tdk.com/inf/30/ds/b82746s.pdf +common mode filter triple choke +0 +6 +6 +Inductor_THT +L_CommonMode_TDK_B82746S6702A040 +8A, 3Phase, Triple Coil, CM Choke, https://www.tdk-electronics.tdk.com/inf/30/ds/b82746s.pdf +common mode filter triple choke +0 +6 +6 +Inductor_THT +L_CommonMode_TDK_B82747E6163A040 +16A, 3Phase, Triple Coil, CM Choke, drill hole 2mm ( https://product.tdk.com/system/files/dam/doc/product/emc/emc/line-filter/data_sheet/30/ds/b82747e6.pdf ) +three phase common mode triple choke +0 +6 +6 +Inductor_THT +L_CommonMode_TDK_B82747E6203A040 +20A, 3Phase, Triple Coil, CM Choke, drill hole 2.2mm ( https://product.tdk.com/system/files/dam/doc/product/emc/emc/line-filter/data_sheet/30/ds/b82747e6.pdf ) +three phase common mode triple choke +0 +6 +6 +Inductor_THT +L_CommonMode_TDK_B82747E6253A040 +25A, 3Phase, Triple Coil, CM Choke, drill hole 2.44mm ( https://product.tdk.com/system/files/dam/doc/product/emc/emc/line-filter/data_sheet/30/ds/b82747e6.pdf ) +three phase common mode triple choke +0 +6 +6 +Inductor_THT +L_CommonMode_TDK_B82747E6353A040 +35A, 3Phase, Triple Coil, CM Choke, drill hole 3mm ( https://product.tdk.com/system/files/dam/doc/product/emc/emc/line-filter/data_sheet/30/ds/b82747e6.pdf ) +three phase common mode triple choke +0 +6 +6 +Inductor_THT +L_CommonMode_TDK_B82767S4123N030 +12A, 3Phase N, Quadruple Coil, https://www.tdk-electronics.tdk.com/inf/30/ds/b82767s4.pdf +common mode filter quadruple choke +0 +8 +8 +Inductor_THT +L_CommonMode_TDK_B82767S4193N030 +19A, 3Phase N, Quadruple Coil, https://www.tdk-electronics.tdk.com/inf/30/ds/b82767s4.pdf +common mode filter quadruple choke +0 +8 +8 +Inductor_THT +L_CommonMode_TDK_B82767S4263N030 +26A , 3Phase N, Quadruple Coil, https://www.tdk-electronics.tdk.com/inf/30/ds/b82767s4.pdf +common mode filter quadruple choke +0 +8 +8 +Inductor_THT +L_CommonMode_Toroid_Vertical_L19.3mm_W10.8mm_Px6.35mm_Py15.24mm_Bourns_8100 +L_CommonMode_Toroid, Vertical series, Radial, pin pitch=6.35*15.24mm^2, , length*width=19.304*10.795mm^2, Bourns, 8100, http://datasheet.octopart.com/8120-RC-Bourns-datasheet-10228452.pdf +L_CommonMode_Toroid Vertical series Radial pin pitch 6.35*15.24mm^2 length 19.304mm width 10.795mm Bourns 8100 +0 +4 +4 +Inductor_THT +L_CommonMode_Toroid_Vertical_L21.0mm_W10.0mm_Px5.08mm_Py12.70mm_Murata_5100 +L_CommonMode_Toroid, Vertical series, Radial, pin pitch=5.08*12.70mm^2, , length*width=21*10mm^2, muRATA, 5100, http://www.murata-ps.com/data/magnetics/kmp_5100.pdf +L_CommonMode_Toroid Vertical series Radial pin pitch 5.08*12.70mm^2 length 21mm width 10mm muRATA 5100 +0 +4 +4 +Inductor_THT +L_CommonMode_Toroid_Vertical_L24.0mm_W16.3mm_Px10.16mm_Py20.32mm_Murata_5200 +L_CommonMode_Toroid, Vertical series, Radial, pin pitch=10.16*20.32mm^2, , length*width=24*16.3mm^2, muRATA, 5200, http://www.murata-ps.com/data/magnetics/kmp_5200.pdf +L_CommonMode_Toroid Vertical series Radial pin pitch 10.16*20.32mm^2 length 24mm width 16.3mm muRATA 5200 +0 +4 +4 +Inductor_THT +L_CommonMode_Toroid_Vertical_L30.5mm_W15.2mm_Px10.16mm_Py20.32mm_Bourns_8100 +L_CommonMode_Toroid, Vertical series, Radial, pin pitch=10.16*20.32mm^2, , length*width=30.479999999999997*15.239999999999998mm^2, Bourns, 8100, http://datasheet.octopart.com/8120-RC-Bourns-datasheet-10228452.pdf +L_CommonMode_Toroid Vertical series Radial pin pitch 10.16*20.32mm^2 length 30.479999999999997mm width 15.239999999999998mm Bourns 8100 +0 +4 +4 +Inductor_THT +L_CommonMode_Toroid_Vertical_L34.3mm_W20.3mm_Px15.24mm_Py22.86mm_Bourns_8100 +L_CommonMode_Toroid, Vertical series, Radial, pin pitch=15.24*22.86mm^2, , length*width=34.29*20.32mm^2, Bourns, 8100, http://datasheet.octopart.com/8120-RC-Bourns-datasheet-10228452.pdf +L_CommonMode_Toroid Vertical series Radial pin pitch 15.24*22.86mm^2 length 34.29mm width 20.32mm Bourns 8100 +0 +4 +4 +Inductor_THT +L_CommonMode_Toroid_Vertical_L36.8mm_W20.3mm_Px15.24mm_Py22.86mm_Bourns_8100 +L_CommonMode_Toroid, Vertical series, Radial, pin pitch=15.24*22.86mm^2, , length*width=36.83*20.32mm^2, Bourns, 8100, http://datasheet.octopart.com/8120-RC-Bourns-datasheet-10228452.pdf +L_CommonMode_Toroid Vertical series Radial pin pitch 15.24*22.86mm^2 length 36.83mm width 20.32mm Bourns 8100 +0 +4 +4 +Inductor_THT +L_CommonMode_Toroid_Vertical_L38.1mm_W20.3mm_Px15.24mm_Py22.86mm_Bourns_8100 +L_CommonMode_Toroid, Vertical series, Radial, pin pitch=15.24*22.86mm^2, , length*width=38.099999999999994*20.32mm^2, Bourns, 8100, http://datasheet.octopart.com/8120-RC-Bourns-datasheet-10228452.pdf +L_CommonMode_Toroid Vertical series Radial pin pitch 15.24*22.86mm^2 length 38.099999999999994mm width 20.32mm Bourns 8100 +0 +4 +4 +Inductor_THT +L_CommonMode_Toroid_Vertical_L39.4mm_W20.3mm_Px15.24mm_Py22.86mm_Bourns_8100 +L_CommonMode_Toroid, Vertical series, Radial, pin pitch=15.24*22.86mm^2, , length*width=39.37*20.32mm^2, Bourns, 8100, http://datasheet.octopart.com/8120-RC-Bourns-datasheet-10228452.pdf +L_CommonMode_Toroid Vertical series Radial pin pitch 15.24*22.86mm^2 length 39.37mm width 20.32mm Bourns 8100 +0 +4 +4 +Inductor_THT +L_CommonMode_Toroid_Vertical_L41.9mm_W20.3mm_Px15.24mm_Py22.86mm_Bourns_8100 +L_CommonMode_Toroid, Vertical series, Radial, pin pitch=15.24*22.86mm^2, , length*width=41.91*20.32mm^2, Bourns, 8100, http://datasheet.octopart.com/8120-RC-Bourns-datasheet-10228452.pdf +L_CommonMode_Toroid Vertical series Radial pin pitch 15.24*22.86mm^2 length 41.91mm width 20.32mm Bourns 8100 +0 +4 +4 +Inductor_THT +L_CommonMode_Toroid_Vertical_L43.2mm_W22.9mm_Px17.78mm_Py30.48mm_Bourns_8100 +L_CommonMode_Toroid, Vertical series, Radial, pin pitch=17.78*30.48mm^2, , length*width=43.18*22.86mm^2, Bourns, 8100, http://datasheet.octopart.com/8120-RC-Bourns-datasheet-10228452.pdf +L_CommonMode_Toroid Vertical series Radial pin pitch 17.78*30.48mm^2 length 43.18mm width 22.86mm Bourns 8100 +0 +4 +4 +Inductor_THT +L_CommonMode_VAC_T60405-S6123-X140 +40A, 3Phase, Triple Coil, CM Choke, https://vacuumschmelze.com/03_Documents/Datasheets%20-%20Drawings/Commom-Mode-Chokes/6123-X140.pdf +common mode filter +0 +6 +6 +Inductor_THT +L_CommonMode_VAC_T60405-S6123-X240 +40A, 3Phase, Triple Coil, CM Choke, https://vacuumschmelze.com/03_Documents/Datasheets%20-%20Drawings/Commom-Mode-Chokes/6123-X240.pdf +common mode filter triple choke +0 +6 +6 +Inductor_THT +L_CommonMode_VAC_T60405-S6123-X402 +30A, 3Phase N, Quadruple Coil, CM Choke, https://vacuumschmelze.com/03_Documents/Datasheets%20-%20Drawings/Commom-Mode-Chokes/6123-X402.pdf +common mode filter quadruple choke +0 +8 +8 +Inductor_THT +L_CommonMode_Wuerth_WE-CMB-L +Wuerth, WE-CMB, Bauform L, +CommonModeChoke Gleichtaktdrossel +0 +4 +4 +Inductor_THT +L_CommonMode_Wuerth_WE-CMB-M +Wuerth, WE-CMB, Bauform M, +CommonModeChoke Gleichtaktdrossel +0 +4 +4 +Inductor_THT +L_CommonMode_Wuerth_WE-CMB-S +Wuerth, WE-CMB, Bauform S, +CommonModeChoke Gleichtaktdrossel +0 +4 +4 +Inductor_THT +L_CommonMode_Wuerth_WE-CMB-XL +Wuerth, WE-CMB, Bauform XL, +CommonModeChoke Gleichtaktdrossel +0 +4 +4 +Inductor_THT +L_CommonMode_Wuerth_WE-CMB-XS +Wuerth, WE-CMB, Bauform XS, +CommonModeChoke Gleichtaktdrossel +0 +4 +4 +Inductor_THT +L_CommonMode_Wuerth_WE-CMB-XXL +Wuerth, WE-CMB, Bauform XXL, +CommonModeChoke Gleichtaktdrossel +0 +4 +4 +Inductor_THT +L_Mount_Lodestone_VTM120 +Lodestone Pacific, 30.48mm diameter vertical toroid mount, 16AWG/1.27mm holes, https://www.lodestonepacific.com/wp-content/uploads/2020/07/VTM-Series-Full-Page.pdf +vertical inductor toroid mount +0 +4 +4 +Inductor_THT +L_Mount_Lodestone_VTM160 +Lodestone Pacific, 40.64mm diameter vertical toroid mount, 16AWG/1.27mm holes, https://www.lodestonepacific.com/wp-content/uploads/2020/07/VTM-Series-Full-Page.pdf +vertical inductor toroid mount +0 +4 +4 +Inductor_THT +L_Mount_Lodestone_VTM254 +Lodestone Pacific, 64.51mm diameter vertical toroid mount, 16AWG/1.27mm holes, https://www.lodestonepacific.com/wp-content/uploads/2020/07/VTM-Series-Full-Page.pdf +vertical inductor toroid mount +0 +4 +4 +Inductor_THT +L_Mount_Lodestone_VTM280 +Lodestone Pacific, 71.12mm diameter vertical toroid mount, 16AWG/1.27mm holes, https://www.lodestonepacific.com/wp-content/uploads/2020/07/VTM-Series-Full-Page.pdf +vertical inductor toroid mount +0 +4 +4 +Inductor_THT +L_Mount_Lodestone_VTM950-6 +Lodestone Pacific, vertical toroid mount, 11x19mm, 6 pins, https://www.lodestonepacific.com/wp-content/uploads/2021/05/VTM950-6.pdf +vertical inductor toroid mount +0 +6 +6 +Inductor_THT +L_Radial_D6.0mm_P4.00mm +Inductor, Radial series, Radial, pin pitch=4.00mm, , diameter=6.0mm, http://www.abracon.com/Magnetics/radial/AIUR-07.pdf +Inductor Radial series Radial pin pitch 4.00mm diameter 6.0mm +0 +2 +2 +Inductor_THT +L_Radial_D7.0mm_P3.00mm +Inductor, Radial series, Radial, pin pitch=3.00mm, , diameter=7mm, http://www.abracon.com/Magnetics/radial/AIUR-16.pdf +Inductor Radial series Radial pin pitch 3.00mm diameter 7mm +0 +2 +2 +Inductor_THT +L_Radial_D7.2mm_P3.00mm_Murata_1700 +Inductor, Radial series, Radial, pin pitch=3.00mm, , diameter=7.2mm, MuRATA, 1700, http://www.murata-ps.com/data/magnetics/kmp_1700.pdf +Inductor Radial series Radial pin pitch 3.00mm diameter 7.2mm MuRATA 1700 +0 +2 +2 +Inductor_THT +L_Radial_D7.5mm_P3.50mm_Fastron_07P +Inductor, Radial series, Radial, pin pitch=3.50mm, , diameter=7.5mm, Fastron, 07P, http://www.fastrongroup.com/image-show/39/07P.pdf?type=Complete-DataSheet&productType=series +Inductor Radial series Radial pin pitch 3.50mm diameter 7.5mm Fastron 07P +0 +2 +2 +Inductor_THT +L_Radial_D7.5mm_P5.00mm_Fastron_07P +Inductor, Radial series, Radial, pin pitch=5.00mm, , diameter=7.5mm, Fastron, 07P, http://www.fastrongroup.com/image-show/39/07P.pdf?type=Complete-DataSheet&productType=series +Inductor Radial series Radial pin pitch 5.00mm diameter 7.5mm Fastron 07P +0 +2 +2 +Inductor_THT +L_Radial_D7.8mm_P5.00mm_Fastron_07HCP +Inductor, Radial series, Radial, pin pitch=5.00mm, , diameter=7.8mm, Fastron, 07HCP, http://www.abracon.com/Magnetics/radial/AISR875.pdf +Inductor Radial series Radial pin pitch 5.00mm diameter 7.8mm Fastron 07HCP +0 +2 +2 +Inductor_THT +L_Radial_D8.7mm_P5.00mm_Fastron_07HCP +Inductor, Radial series, Radial, pin pitch=5.00mm, , diameter=8.7mm, Fastron, 07HCP, http://cdn-reichelt.de/documents/datenblatt/B400/DS_07HCP.pdf +Inductor Radial series Radial pin pitch 5.00mm diameter 8.7mm Fastron 07HCP +0 +2 +2 +Inductor_THT +L_Radial_D9.5mm_P5.00mm_Fastron_07HVP +Inductor, Radial series, Radial, pin pitch=5.00mm, , diameter=9.5mm, Fastron, 07HVP, http://www.fastrongroup.com/image-show/107/07HVP%2007HVP_T.pdf?type=Complete-DataSheet&productType=series +Inductor Radial series Radial pin pitch 5.00mm diameter 9.5mm Fastron 07HVP +0 +2 +2 +Inductor_THT +L_Radial_D10.0mm_P5.00mm_Fastron_07M +Inductor, Radial series, Radial, pin pitch=5.00mm, , diameter=10mm, Fastron, 07M, http://www.fastrongroup.com/image-show/37/07M.pdf?type=Complete-DataSheet&productType=series +Inductor Radial series Radial pin pitch 5.00mm diameter 10mm Fastron 07M +0 +2 +2 +Inductor_THT +L_Radial_D10.0mm_P5.00mm_Fastron_07P +Inductor, Radial series, Radial, pin pitch=5.00mm, , diameter=10mm, Fastron, 07P, http://www.fastrongroup.com/image-show/37/07M.pdf?type=Complete-DataSheet&productType=series +Inductor Radial series Radial pin pitch 5.00mm diameter 10mm Fastron 07P +0 +2 +2 +Inductor_THT +L_Radial_D10.0mm_P5.00mm_Neosid_SD12_style3 +Inductor, Radial series, Radial, pin pitch=5.00mm, , diameter=10.0mm, Neosid, SD12, style3, http://www.neosid.de/produktblaetter/neosid_Festinduktivitaet_Sd12.pdf +Inductor Radial series Radial pin pitch 5.00mm diameter 10.0mm Neosid SD12 style3 +0 +2 +2 +Inductor_THT +L_Radial_D10.0mm_P5.00mm_Neosid_SD12k_style3 +Inductor, Radial series, Radial, pin pitch=5.00mm, , diameter=10.0mm, Neosid, SD12k, style3, http://www.neosid.de/produktblaetter/neosid_Festinduktivitaet_Sd12k.pdf +Inductor Radial series Radial pin pitch 5.00mm diameter 10.0mm Neosid SD12k style3 +0 +2 +2 +Inductor_THT +L_Radial_D10.5mm_P4.00x5.00mm_Murata_1200RS +Inductor, Radial, Pitch=4.00x5.00mm, Diameter=10.5mm, Murata 1200RS, http://www.murata-ps.com/data/magnetics/kmp_1200rs.pdf +Inductor Radial Murata 1200RS +0 +4 +2 +Inductor_THT +L_Radial_D10.5mm_P5.00mm_Abacron_AISR-01 +Inductor, Radial series, Radial, pin pitch=5.00mm, , diameter=10.5mm, Abacron, AISR-01, http://www.abracon.com/Magnetics/radial/AISR-01.pdf +Inductor Radial series Radial pin pitch 5.00mm diameter 10.5mm Abacron AISR-01 +0 +2 +2 +Inductor_THT +L_Radial_D12.0mm_P5.00mm_Fastron_11P +Inductor, Radial series, Radial, pin pitch=5.00mm, , diameter=12.0mm, Fastron, 11P, http://cdn-reichelt.de/documents/datenblatt/B400/DS_11P.pdf +Inductor Radial series Radial pin pitch 5.00mm diameter 12.0mm Fastron 11P +0 +2 +2 +Inductor_THT +L_Radial_D12.0mm_P5.00mm_Neosid_SD12_style2 +Inductor, Radial series, Radial, pin pitch=5.00mm, , diameter=12.0mm, Neosid, SD12, style2, http://www.neosid.de/produktblaetter/neosid_Festinduktivitaet_Sd12.pdf +Inductor Radial series Radial pin pitch 5.00mm diameter 12.0mm Neosid SD12 style2 +0 +2 +2 +Inductor_THT +L_Radial_D12.0mm_P5.00mm_Neosid_SD12k_style2 +Inductor, Radial series, Radial, pin pitch=5.00mm, , diameter=12.0mm, Neosid, SD12k, style2, http://www.neosid.de/produktblaetter/neosid_Festinduktivitaet_Sd12k.pdf +Inductor Radial series Radial pin pitch 5.00mm diameter 12.0mm Neosid SD12k style2 +0 +2 +2 +Inductor_THT +L_Radial_D12.0mm_P6.00mm_Murata_1900R +Inductor, Radial series, Radial, pin pitch=6.00mm, , diameter=12.0mm, MuRATA, 1900R, http://www.murata-ps.com/data/magnetics/kmp_1900r.pdf +Inductor Radial series Radial pin pitch 6.00mm diameter 12.0mm MuRATA 1900R +0 +2 +2 +Inductor_THT +L_Radial_D12.0mm_P10.00mm_Neosid_SD12_style1 +Inductor, Radial series, Radial, pin pitch=10.00mm, , diameter=12.0mm, Neosid, SD12, style1, http://www.neosid.de/produktblaetter/neosid_Festinduktivitaet_Sd12.pdf +Inductor Radial series Radial pin pitch 10.00mm diameter 12.0mm Neosid SD12 style1 +0 +2 +2 +Inductor_THT +L_Radial_D12.0mm_P10.00mm_Neosid_SD12k_style1 +Inductor, Radial series, Radial, pin pitch=10.00mm, , diameter=12.0mm, Neosid, SD12k, style1, http://www.neosid.de/produktblaetter/neosid_Festinduktivitaet_Sd12k.pdf +Inductor Radial series Radial pin pitch 10.00mm diameter 12.0mm Neosid SD12k style1 +0 +2 +2 +Inductor_THT +L_Radial_D12.5mm_P7.00mm_Fastron_09HCP +Inductor, Radial series, Radial, pin pitch=7.00mm, , diameter=12.5mm, Fastron, 09HCP, http://cdn-reichelt.de/documents/datenblatt/B400/DS_09HCP.pdf +Inductor Radial series Radial pin pitch 7.00mm diameter 12.5mm Fastron 09HCP +0 +2 +2 +Inductor_THT +L_Radial_D12.5mm_P9.00mm_Fastron_09HCP +Inductor, Radial series, Radial, pin pitch=9.00mm, , diameter=12.5mm, Fastron, 09HCP, http://cdn-reichelt.de/documents/datenblatt/B400/DS_09HCP.pdf +Inductor Radial series Radial pin pitch 9.00mm diameter 12.5mm Fastron 09HCP +0 +2 +2 +Inductor_THT +L_Radial_D13.5mm_P7.00mm_Fastron_09HCP +Inductor, Radial series, Radial, pin pitch=7.00mm, , diameter=13.5mm, Fastron, 09HCP, http://cdn-reichelt.de/documents/datenblatt/B400/DS_09HCP.pdf +Inductor Radial series Radial pin pitch 7.00mm diameter 13.5mm Fastron 09HCP +0 +2 +2 +Inductor_THT +L_Radial_D14.2mm_P10.00mm_Neosid_SD14 +Inductor, Radial series, Radial, pin pitch=10.00mm, , diameter=14.2mm, Neosid, SD14, http://www.neosid.de/produktblaetter/neosid_Festinduktivitaet_Sd14.pdf +Inductor Radial series Radial pin pitch 10.00mm diameter 14.2mm Neosid SD14 +0 +2 +2 +Inductor_THT +L_Radial_D16.0mm_P10.00mm_Panasonic_15E-L +Panasonic ELC Type 15E-L inductor, radial, shielded, pin pitch=10.00mm, diameter=16.0mm, https://mediap.industry.panasonic.eu/assets/imported/industrial.panasonic.com/cdbs/www-data/pdf/AGB0000/AGB0000CE10.pdf +ELC15ExxxL +0 +3 +3 +Inductor_THT +L_Radial_D16.8mm_P11.43mm_Vishay_IHB-1 +Inductor, Radial series, Radial, pin pitch=11.43mm, , diameter=16.8mm, Vishay, IHB-1, http://www.vishay.com/docs/34015/ihb.pdf +Inductor Radial series Radial pin pitch 11.43mm diameter 16.8mm Vishay IHB-1 +0 +2 +2 +Inductor_THT +L_Radial_D16.8mm_P12.07mm_Vishay_IHB-1 +Inductor, Radial series, Radial, pin pitch=12.07mm, , diameter=16.8mm, Vishay, IHB-1, http://www.vishay.com/docs/34015/ihb.pdf +Inductor Radial series Radial pin pitch 12.07mm diameter 16.8mm Vishay IHB-1 +0 +2 +2 +Inductor_THT +L_Radial_D16.8mm_P12.70mm_Vishay_IHB-1 +Inductor, Radial series, Radial, pin pitch=12.70mm, , diameter=16.8mm, Vishay, IHB-1, http://www.vishay.com/docs/34015/ihb.pdf +Inductor Radial series Radial pin pitch 12.70mm diameter 16.8mm Vishay IHB-1 +0 +2 +2 +Inductor_THT +L_Radial_D18.0mm_P10.00mm +Inductor, Radial series, Radial, pin pitch=10.00mm, , diameter=18mm, http://www.abracon.com/Magnetics/radial/AIUR-15.pdf +Inductor Radial series Radial pin pitch 10.00mm diameter 18mm +0 +2 +2 +Inductor_THT +L_Radial_D21.0mm_P14.61mm_Vishay_IHB-2 +Inductor, Radial series, Radial, pin pitch=14.61mm, , diameter=21mm, Vishay, IHB-2, http://www.vishay.com/docs/34015/ihb.pdf +Inductor Radial series Radial pin pitch 14.61mm diameter 21mm Vishay IHB-2 +0 +2 +2 +Inductor_THT +L_Radial_D21.0mm_P15.00mm_Vishay_IHB-2 +Inductor, Radial series, Radial, pin pitch=15.00mm, , diameter=21mm, Vishay, IHB-2, http://www.vishay.com/docs/34015/ihb.pdf +Inductor Radial series Radial pin pitch 15.00mm diameter 21mm Vishay IHB-2 +0 +2 +2 +Inductor_THT +L_Radial_D21.0mm_P15.24mm_Vishay_IHB-2 +Inductor, Radial series, Radial, pin pitch=15.24mm, , diameter=21mm, Vishay, IHB-2, http://www.vishay.com/docs/34015/ihb.pdf +Inductor Radial series Radial pin pitch 15.24mm diameter 21mm Vishay IHB-2 +0 +2 +2 +Inductor_THT +L_Radial_D21.0mm_P15.75mm_Vishay_IHB-2 +Inductor, Radial series, Radial, pin pitch=15.75mm, , diameter=21mm, Vishay, IHB-2, http://www.vishay.com/docs/34015/ihb.pdf +Inductor Radial series Radial pin pitch 15.75mm diameter 21mm Vishay IHB-2 +0 +2 +2 +Inductor_THT +L_Radial_D21.0mm_P19.00mm +Inductor, Radial series, Radial, pin pitch=19.00mm, , diameter=21mm, http://www.abracon.com/Magnetics/radial/AIRD02.pdf +Inductor Radial series Radial pin pitch 19.00mm diameter 21mm +0 +2 +2 +Inductor_THT +L_Radial_D24.0mm_P24.00mm +Inductor, Radial series, Radial, pin pitch=24.00mm, , diameter=24mm +Inductor Radial series Radial pin pitch 24.00mm diameter 24mm +0 +2 +2 +Inductor_THT +L_Radial_D24.4mm_P22.90mm_Murata_1400series +Inductor, Radial series, Radial, pin pitch=22.90mm, , diameter=24.4mm, muRATA, 1400series, http://www.murata-ps.com/data/magnetics/kmp_1400.pdf +Inductor Radial series Radial pin pitch 22.90mm diameter 24.4mm muRATA 1400series +0 +2 +2 +Inductor_THT +L_Radial_D24.4mm_P23.10mm_Murata_1400series +Inductor, Radial series, Radial, pin pitch=23.10mm, , diameter=24.4mm, muRATA, 1400series, http://www.murata-ps.com/data/magnetics/kmp_1400.pdf +Inductor Radial series Radial pin pitch 23.10mm diameter 24.4mm muRATA 1400series +0 +2 +2 +Inductor_THT +L_Radial_D24.4mm_P23.40mm_Murata_1400series +Inductor, Radial series, Radial, pin pitch=23.40mm, , diameter=24.4mm, muRATA, 1400series, http://www.murata-ps.com/data/magnetics/kmp_1400.pdf +Inductor Radial series Radial pin pitch 23.40mm diameter 24.4mm muRATA 1400series +0 +2 +2 +Inductor_THT +L_Radial_D24.4mm_P23.70mm_Murata_1400series +Inductor, Radial series, Radial, pin pitch=23.70mm, , diameter=24.4mm, muRATA, 1400series, http://www.murata-ps.com/data/magnetics/kmp_1400.pdf +Inductor Radial series Radial pin pitch 23.70mm diameter 24.4mm muRATA 1400series +0 +2 +2 +Inductor_THT +L_Radial_D24.4mm_P23.90mm_Murata_1400series +Inductor, Radial series, Radial, pin pitch=23.90mm, , diameter=24.4mm, muRATA, 1400series, http://www.murata-ps.com/data/magnetics/kmp_1400.pdf +Inductor Radial series Radial pin pitch 23.90mm diameter 24.4mm muRATA 1400series +0 +2 +2 +Inductor_THT +L_Radial_D27.9mm_P18.29mm_Vishay_IHB-3 +Inductor, Radial series, Radial, pin pitch=18.29mm, , diameter=27.9mm, Vishay, IHB-3, http://www.vishay.com/docs/34015/ihb.pdf +Inductor Radial series Radial pin pitch 18.29mm diameter 27.9mm Vishay IHB-3 +0 +2 +2 +Inductor_THT +L_Radial_D27.9mm_P19.05mm_Vishay_IHB-3 +Inductor, Radial series, Radial, pin pitch=19.05mm, , diameter=27.9mm, Vishay, IHB-3, http://www.vishay.com/docs/34015/ihb.pdf +Inductor Radial series Radial pin pitch 19.05mm diameter 27.9mm Vishay IHB-3 +0 +2 +2 +Inductor_THT +L_Radial_D27.9mm_P20.07mm_Vishay_IHB-3 +Inductor, Radial series, Radial, pin pitch=20.07mm, , diameter=27.9mm, Vishay, IHB-3, http://www.vishay.com/docs/34015/ihb.pdf +Inductor Radial series Radial pin pitch 20.07mm diameter 27.9mm Vishay IHB-3 +0 +2 +2 +Inductor_THT +L_Radial_D28.0mm_P29.20mm +Inductor, Radial series, Radial, pin pitch=29.20mm, , diameter=28mm +Inductor Radial series Radial pin pitch 29.20mm diameter 28mm +0 +2 +2 +Inductor_THT +L_Radial_D29.8mm_P28.30mm_Murata_1400series +Inductor, Radial series, Radial, pin pitch=28.30mm, , diameter=29.8mm, muRATA, 1400series, http://www.murata-ps.com/data/magnetics/kmp_1400.pdf +Inductor Radial series Radial pin pitch 28.30mm diameter 29.8mm muRATA 1400series +0 +2 +2 +Inductor_THT +L_Radial_D29.8mm_P28.50mm_Murata_1400series +Inductor, Radial series, Radial, pin pitch=28.50mm, , diameter=29.8mm, muRATA, 1400series, http://www.murata-ps.com/data/magnetics/kmp_1400.pdf +Inductor Radial series Radial pin pitch 28.50mm diameter 29.8mm muRATA 1400series +0 +2 +2 +Inductor_THT +L_Radial_D29.8mm_P28.80mm_Murata_1400series +Inductor, Radial series, Radial, pin pitch=28.80mm, , diameter=29.8mm, muRATA, 1400series, http://www.murata-ps.com/data/magnetics/kmp_1400.pdf +Inductor Radial series Radial pin pitch 28.80mm diameter 29.8mm muRATA 1400series +0 +2 +2 +Inductor_THT +L_Radial_D29.8mm_P29.00mm_Murata_1400series +Inductor, Radial series, Radial, pin pitch=29.00mm, , diameter=29.8mm, muRATA, 1400series, http://www.murata-ps.com/data/magnetics/kmp_1400.pdf +Inductor Radial series Radial pin pitch 29.00mm diameter 29.8mm muRATA 1400series +0 +2 +2 +Inductor_THT +L_Radial_D29.8mm_P29.30mm_Murata_1400series +Inductor, Radial series, Radial, pin pitch=29.30mm, , diameter=29.8mm, muRATA, 1400series, http://www.murata-ps.com/data/magnetics/kmp_1400.pdf +Inductor Radial series Radial pin pitch 29.30mm diameter 29.8mm muRATA 1400series +0 +2 +2 +Inductor_THT +L_Radial_D40.6mm_P26.16mm_Vishay_IHB-5 +Inductor, Radial series, Radial, pin pitch=26.16mm, , diameter=40.64mm, Vishay, IHB-5, http://www.vishay.com/docs/34015/ihb.pdf +Inductor Radial series Radial pin pitch 26.16mm diameter 40.64mm Vishay IHB-5 +0 +2 +2 +Inductor_THT +L_Radial_D40.6mm_P27.18mm_Vishay_IHB-4 +Inductor, Radial series, Radial, pin pitch=27.18mm, , diameter=40.64mm, Vishay, IHB-4, http://www.vishay.com/docs/34015/ihb.pdf +Inductor Radial series Radial pin pitch 27.18mm diameter 40.64mm Vishay IHB-4 +0 +2 +2 +Inductor_THT +L_Radial_D40.6mm_P27.94mm_Vishay_IHB-4 +Inductor, Radial series, Radial, pin pitch=27.94mm, , diameter=40.64mm, Vishay, IHB-4, http://www.vishay.com/docs/34015/ihb.pdf +Inductor Radial series Radial pin pitch 27.94mm diameter 40.64mm Vishay IHB-4 +0 +2 +2 +Inductor_THT +L_Radial_D40.6mm_P27.94mm_Vishay_IHB-5 +Inductor, Radial series, Radial, pin pitch=27.94mm, , diameter=40.64mm, Vishay, IHB-5, http://www.vishay.com/docs/34015/ihb.pdf +Inductor Radial series Radial pin pitch 27.94mm diameter 40.64mm Vishay IHB-5 +0 +2 +2 +Inductor_THT +L_Radial_D40.6mm_P28.70mm_Vishay_IHB-5 +Inductor, Radial series, Radial, pin pitch=28.70mm, , diameter=40.64mm, Vishay, IHB-5, http://www.vishay.com/docs/34015/ihb.pdf +Inductor Radial series Radial pin pitch 28.70mm diameter 40.64mm Vishay IHB-5 +0 +2 +2 +Inductor_THT +L_Radial_D50.8mm_P33.27mm_Vishay_IHB-6 +Inductor, Radial series, Radial, pin pitch=33.27mm, , diameter=50.8mm, Vishay, IHB-6, http://www.vishay.com/docs/34015/ihb.pdf +Inductor Radial series Radial pin pitch 33.27mm diameter 50.8mm Vishay IHB-6 +0 +2 +2 +Inductor_THT +L_Radial_D50.8mm_P34.29mm_Vishay_IHB-6 +Inductor, Radial series, Radial, pin pitch=34.29mm, , diameter=50.8mm, Vishay, IHB-6, http://www.vishay.com/docs/34015/ihb.pdf +Inductor Radial series Radial pin pitch 34.29mm diameter 50.8mm Vishay IHB-6 +0 +2 +2 +Inductor_THT +L_Radial_D50.8mm_P35.81mm_Vishay_IHB-6 +Inductor, Radial series, Radial, pin pitch=35.81mm, , diameter=50.8mm, Vishay, IHB-6, http://www.vishay.com/docs/34015/ihb.pdf +Inductor Radial series Radial pin pitch 35.81mm diameter 50.8mm Vishay IHB-6 +0 +2 +2 +Inductor_THT +L_Radial_D50.8mm_P36.32mm_Vishay_IHB-6 +Inductor, Radial series, Radial, pin pitch=36.32mm, , diameter=50.8mm, Vishay, IHB-6, http://www.vishay.com/docs/34015/ihb.pdf +Inductor Radial series Radial pin pitch 36.32mm diameter 50.8mm Vishay IHB-6 +0 +2 +2 +Inductor_THT +L_Radial_D50.8mm_P38.86mm_Vishay_IHB-6 +Inductor, Radial series, Radial, pin pitch=38.86mm, , diameter=50.8mm, Vishay, IHB-6, http://www.vishay.com/docs/34015/ihb.pdf +Inductor Radial series Radial pin pitch 38.86mm diameter 50.8mm Vishay IHB-6 +0 +2 +2 +Inductor_THT +L_Radial_L7.5mm_W4.6mm_P5.00mm_Neosid_SD75 +Inductor, Radial series, Radial, pin pitch=5.00mm, , length*width=7.5*4.6mm^2, Neosid, SD75, http://www.neosid.de/produktblaetter/neosid_Festinduktivitaet_Sd75.pdf +Inductor Radial series Radial pin pitch 5.00mm length 7.5mm width 4.6mm Neosid SD75 +0 +2 +2 +Inductor_THT +L_Radial_L8.0mm_W8.0mm_P5.00mm_Neosid_NE-CPB-07E +Inductor, Radial series, Radial, pin pitch=5.00mm, , length*width=8*8mm^2, Neosid, NE-CPB-07E, http://www.neosid.de/produktblaetter/neosid_Festinduktivitaet_NE_CPB07E.pdf +Inductor Radial series Radial pin pitch 5.00mm length 8mm width 8mm Neosid NE-CPB-07E +0 +2 +2 +Inductor_THT +L_Radial_L8.0mm_W8.0mm_P5.00mm_Neosid_SD8 +Inductor, Radial series, Radial, pin pitch=5.00mm, , length*width=8*8mm^2, Neosid, SD8, http://www.neosid.de/produktblaetter/neosid_Festinduktivitaet_Sd8.pdf +Inductor Radial series Radial pin pitch 5.00mm length 8mm width 8mm Neosid SD8 +0 +2 +2 +Inductor_THT +L_Radial_L9.1mm_W9.1mm_Px6.35mm_Py6.35mm_Pulse_LP-25 +Inductor, Radial series, Radial, pin pitch=6.35*6.35mm^2, , length*width=9.14*9.14mm^2, Pulse, LP-25, http://datasheet.octopart.com/PE-54044NL-Pulse-datasheet-5313493.pdf +Inductor Radial series Radial pin pitch 6.35*6.35mm^2 length 9.14mm width 9.14mm Pulse LP-25 +0 +2 +2 +Inductor_THT +L_Radial_L10.2mm_W10.2mm_Px7.62mm_Py7.62mm_Pulse_LP-30 +Inductor, Radial series, Radial, pin pitch=7.62*7.62mm^2, , length*width=10.16*10.16mm^2, Pulse, LP-30, http://datasheet.octopart.com/PE-54044NL-Pulse-datasheet-5313493.pdf +Inductor Radial series Radial pin pitch 7.62*7.62mm^2 length 10.16mm width 10.16mm Pulse LP-30 +0 +2 +2 +Inductor_THT +L_Radial_L11.5mm_W11.5mm_Px6.00mm_Py6.00mm_Neosid_NE-CPB-11EN_Drill1.3mm +Inductor, Radial series, Radial, pin pitch=6.00*6.00mm^2, , length*width=11.5*11.5mm^2, Neosid, NE-CPB-11EN, Drill1.3mm, http://www.neosid.de/produktblaetter/neosid_Festinduktivitaet_NE_CPB11EN.pdf +Inductor Radial series Radial pin pitch 6.00*6.00mm^2 length 11.5mm width 11.5mm Neosid NE-CPB-11EN Drill1.3mm +0 +2 +2 +Inductor_THT +L_Radial_L11.5mm_W11.5mm_Px6.00mm_Py6.00mm_Neosid_NE-CPB-11EN_Drill1.5mm +Inductor, Radial series, Radial, pin pitch=6.00*6.00mm^2, , length*width=11.5*11.5mm^2, Neosid, NE-CPB-11EN, Drill1.5mm, http://www.neosid.de/produktblaetter/neosid_Festinduktivitaet_NE_CPB11EN.pdf +Inductor Radial series Radial pin pitch 6.00*6.00mm^2 length 11.5mm width 11.5mm Neosid NE-CPB-11EN Drill1.5mm +0 +2 +2 +Inductor_THT +L_Radial_L11.5mm_W11.5mm_Px6.00mm_Py6.00mm_Neosid_NE-CPB-11EN_Drill1.7mm +Inductor, Radial series, Radial, pin pitch=6.00*6.00mm^2, , length*width=11.5*11.5mm^2, Neosid, NE-CPB-11EN, Drill1.7mm, http://www.neosid.de/produktblaetter/neosid_Festinduktivitaet_NE_CPB11EN.pdf +Inductor Radial series Radial pin pitch 6.00*6.00mm^2 length 11.5mm width 11.5mm Neosid NE-CPB-11EN Drill1.7mm +0 +2 +2 +Inductor_THT +L_Radial_L11.5mm_W11.5mm_Px6.00mm_Py6.00mm_Neosid_NE-CPB-11EN_Drill1.8mm +Inductor, Radial series, Radial, pin pitch=6.00*6.00mm^2, , length*width=11.5*11.5mm^2, Neosid, NE-CPB-11EN, Drill1.8mm, http://www.neosid.de/produktblaetter/neosid_Festinduktivitaet_NE_CPB11EN.pdf +Inductor Radial series Radial pin pitch 6.00*6.00mm^2 length 11.5mm width 11.5mm Neosid NE-CPB-11EN Drill1.8mm +0 +2 +2 +Inductor_THT +L_Radial_L12.6mm_W12.6mm_Px9.52mm_Py9.52mm_Pulse_LP-37 +Inductor, Radial series, Radial, pin pitch=9.52*9.52mm^2, , length*width=12.57*12.57mm^2, Pulse, LP-37, http://datasheet.octopart.com/PE-54044NL-Pulse-datasheet-5313493.pdf +Inductor Radial series Radial pin pitch 9.52*9.52mm^2 length 12.57mm width 12.57mm Pulse LP-37 +0 +2 +2 +Inductor_THT +L_Radial_L16.1mm_W16.1mm_Px7.62mm_Py12.70mm_Pulse_LP-44 +Inductor, Radial series, Radial, pin pitch=7.62*12.70mm^2, , length*width=16.13*16.13mm^2, Pulse, LP-44, http://datasheet.octopart.com/PE-54044NL-Pulse-datasheet-5313493.pdf +Inductor Radial series Radial pin pitch 7.62*12.70mm^2 length 16.13mm width 16.13mm Pulse LP-44 +0 +2 +2 +Inductor_THT +L_SELF1408 +Self Ferrite 14 - 08 +SELF +0 +7 +3 +Inductor_THT +L_SELF1418 +Self Ferrite 14 - 18 +SELF +0 +10 +4 +Inductor_THT +L_Toroid_Horizontal_D3.2mm_P6.40mm_Diameter3-5mm_Amidon-T12 +L_Toroid, Horizontal series, Radial, pin pitch=6.40mm, , diameter=3.175mm, Diameter3-5mm, Amidon-T12 +L_Toroid Horizontal series Radial pin pitch 6.40mm diameter 3.175mm Diameter3-5mm Amidon-T12 +0 +2 +2 +Inductor_THT +L_Toroid_Horizontal_D4.1mm_P8.00mm_Diameter4-5mm_Amidon-T16 +L_Toroid, Horizontal series, Radial, pin pitch=8.00mm, , diameter=4.064mm, Diameter4-5mm, Amidon-T16 +L_Toroid Horizontal series Radial pin pitch 8.00mm diameter 4.064mm Diameter4-5mm Amidon-T16 +0 +2 +2 +Inductor_THT +L_Toroid_Horizontal_D5.1mm_P9.00mm_Diameter6-5mm_Amidon-T20 +L_Toroid, Horizontal series, Radial, pin pitch=9.00mm, , diameter=5.08mm, Diameter6-5mm, Amidon-T20 +L_Toroid Horizontal series Radial pin pitch 9.00mm diameter 5.08mm Diameter6-5mm Amidon-T20 +0 +2 +2 +Inductor_THT +L_Toroid_Horizontal_D6.5mm_P10.00mm_Diameter7-5mm_Amidon-T25 +L_Toroid, Horizontal series, Radial, pin pitch=10.00mm, , diameter=6.476999999999999mm, Diameter7-5mm, Amidon-T25 +L_Toroid Horizontal series Radial pin pitch 10.00mm diameter 6.476999999999999mm Diameter7-5mm Amidon-T25 +0 +2 +2 +Inductor_THT +L_Toroid_Horizontal_D7.8mm_P13.00mm_Diameter9-5mm_Amidon-T30 +L_Toroid, Horizontal series, Radial, pin pitch=13.00mm, , diameter=7.7978mm, Diameter9-5mm, Amidon-T30 +L_Toroid Horizontal series Radial pin pitch 13.00mm diameter 7.7978mm Diameter9-5mm Amidon-T30 +0 +2 +2 +Inductor_THT +L_Toroid_Horizontal_D9.5mm_P15.00mm_Diameter10-5mm_Amidon-T37 +L_Toroid, Horizontal series, Radial, pin pitch=15.00mm, , diameter=9.524999999999999mm, Diameter10-5mm, Amidon-T37 +L_Toroid Horizontal series Radial pin pitch 15.00mm diameter 9.524999999999999mm Diameter10-5mm Amidon-T37 +0 +2 +2 +Inductor_THT +L_Toroid_Horizontal_D11.2mm_P17.00mm_Diameter12-5mm_Amidon-T44 +L_Toroid, Horizontal series, Radial, pin pitch=17.00mm, , diameter=11.176mm, Diameter12-5mm, Amidon-T44 +L_Toroid Horizontal series Radial pin pitch 17.00mm diameter 11.176mm Diameter12-5mm Amidon-T44 +0 +2 +2 +Inductor_THT +L_Toroid_Horizontal_D12.7mm_P20.00mm_Diameter14-5mm_Amidon-T50 +L_Toroid, Horizontal series, Radial, pin pitch=20.00mm, , diameter=12.7mm, Diameter14-5mm, Amidon-T50 +L_Toroid Horizontal series Radial pin pitch 20.00mm diameter 12.7mm Diameter14-5mm Amidon-T50 +0 +2 +2 +Inductor_THT +L_Toroid_Horizontal_D16.8mm_P14.70mm_Vishay_TJ3 +L_Toroid, Horizontal series, Radial, pin pitch=14.70mm, , diameter=16.8mm, Vishay, TJ3, http://www.vishay.com/docs/34079/tj.pdf +L_Toroid Horizontal series Radial pin pitch 14.70mm diameter 16.8mm Vishay TJ3 +0 +2 +2 +Inductor_THT +L_Toroid_Horizontal_D16.8mm_P14.70mm_Vishay_TJ3_BigPads +L_Toroid, Horizontal series, Radial, pin pitch=14.70mm, , diameter=16.8mm, Vishay, TJ3, BigPads, http://www.vishay.com/docs/34079/tj.pdf +L_Toroid Horizontal series Radial pin pitch 14.70mm diameter 16.8mm Vishay TJ3 BigPads +0 +2 +2 +Inductor_THT +L_Toroid_Horizontal_D17.3mm_P15.24mm_Bourns_2000 +L_Toroid, Horizontal series, Radial, pin pitch=15.24mm, , diameter=17.3mm, Bourns, 2000, http://www.bourns.com/docs/Product-Datasheets/2000_series.pdf?sfvrsn=5 +L_Toroid Horizontal series Radial pin pitch 15.24mm diameter 17.3mm Bourns 2000 +0 +2 +2 +Inductor_THT +L_Toroid_Horizontal_D21.8mm_P19.10mm_Bourns_2100 +L_Toroid, Horizontal series, Radial, pin pitch=19.10mm, , diameter=21.8mm, Bourns, 2100, http://www.bourns.com/docs/Product-Datasheets/2100_series.pdf?sfvrsn=3 +L_Toroid Horizontal series Radial pin pitch 19.10mm diameter 21.8mm Bourns 2100 +0 +2 +2 +Inductor_THT +L_Toroid_Horizontal_D21.8mm_P19.60mm_Bourns_2100 +L_Toroid, Horizontal series, Radial, pin pitch=19.60mm, , diameter=21.8mm, Bourns, 2100, http://www.bourns.com/docs/Product-Datasheets/2100_series.pdf?sfvrsn=3 +L_Toroid Horizontal series Radial pin pitch 19.60mm diameter 21.8mm Bourns 2100 +0 +2 +2 +Inductor_THT +L_Toroid_Horizontal_D22.4mm_P19.80mm_Vishay_TJ4 +L_Toroid, Horizontal series, Radial, pin pitch=19.80mm, , diameter=22.4mm, Vishay, TJ4, http://www.vishay.com/docs/34079/tj.pdf +L_Toroid Horizontal series Radial pin pitch 19.80mm diameter 22.4mm Vishay TJ4 +0 +2 +2 +Inductor_THT +L_Toroid_Horizontal_D24.1mm_P21.80mm_Bourns_2200 +L_Toroid, Horizontal series, Radial, pin pitch=21.80mm, , diameter=24.1mm, Bourns, 2200, http://www.bourns.com/docs/Product-Datasheets/2100_series.pdf?sfvrsn=3 +L_Toroid Horizontal series Radial pin pitch 21.80mm diameter 24.1mm Bourns 2200 +0 +2 +2 +Inductor_THT +L_Toroid_Horizontal_D24.1mm_P23.10mm_Bourns_2200 +L_Toroid, Horizontal series, Radial, pin pitch=23.10mm, , diameter=24.1mm, Bourns, 2200, http://www.bourns.com/docs/Product-Datasheets/2100_series.pdf?sfvrsn=3 +L_Toroid Horizontal series Radial pin pitch 23.10mm diameter 24.1mm Bourns 2200 +0 +2 +2 +Inductor_THT +L_Toroid_Horizontal_D25.4mm_P22.90mm_Vishay_TJ5 +L_Toroid, Horizontal series, Radial, pin pitch=22.90mm, , diameter=25.4mm, Vishay, TJ5, http://www.vishay.com/docs/34079/tj.pdf +L_Toroid Horizontal series Radial pin pitch 22.90mm diameter 25.4mm Vishay TJ5 +0 +2 +2 +Inductor_THT +L_Toroid_Horizontal_D25.4mm_P22.90mm_Vishay_TJ5_BigPads +L_Toroid, Horizontal series, Radial, pin pitch=22.90mm, , diameter=25.4mm, Vishay, TJ5, BigPads, http://www.vishay.com/docs/34079/tj.pdf +L_Toroid Horizontal series Radial pin pitch 22.90mm diameter 25.4mm Vishay TJ5 BigPads +0 +2 +2 +Inductor_THT +L_Toroid_Horizontal_D26.0mm_P5.08mm +inductor 26mm diameter toroid +SELF INDUCTOR +0 +3 +2 +Inductor_THT +L_Toroid_Horizontal_D28.0mm_P25.10mm_Bourns_2200 +L_Toroid, Horizontal series, Radial, pin pitch=25.10mm, , diameter=28mm, Bourns, 2200, http://www.bourns.com/docs/Product-Datasheets/2100_series.pdf?sfvrsn=3 +L_Toroid Horizontal series Radial pin pitch 25.10mm diameter 28mm Bourns 2200 +0 +2 +2 +Inductor_THT +L_Toroid_Horizontal_D28.0mm_P26.67mm_Bourns_2200 +L_Toroid, Horizontal series, Radial, pin pitch=26.67mm, , diameter=28mm, Bourns, 2200, http://www.bourns.com/docs/Product-Datasheets/2100_series.pdf?sfvrsn=3 +L_Toroid Horizontal series Radial pin pitch 26.67mm diameter 28mm Bourns 2200 +0 +2 +2 +Inductor_THT +L_Toroid_Horizontal_D32.5mm_P28.90mm_Bourns_2300 +L_Toroid, Horizontal series, Radial, pin pitch=28.90mm, , diameter=32.5mm, Bourns, 2300, http://www.bourns.com/docs/Product-Datasheets/2300_series.pdf?sfvrsn=3 +L_Toroid Horizontal series Radial pin pitch 28.90mm diameter 32.5mm Bourns 2300 +0 +2 +2 +Inductor_THT +L_Toroid_Horizontal_D32.5mm_P30.00mm_Bourns_2300 +L_Toroid, Horizontal series, Radial, pin pitch=30.00mm, , diameter=32.5mm, Bourns, 2300, http://www.bourns.com/docs/Product-Datasheets/2300_series.pdf?sfvrsn=3 +L_Toroid Horizontal series Radial pin pitch 30.00mm diameter 32.5mm Bourns 2300 +0 +2 +2 +Inductor_THT +L_Toroid_Horizontal_D35.1mm_P31.00mm_Vishay_TJ6 +L_Toroid, Horizontal series, Radial, pin pitch=31.00mm, , diameter=35.1mm, Vishay, TJ6, http://www.vishay.com/docs/34079/tj.pdf +L_Toroid Horizontal series Radial pin pitch 31.00mm diameter 35.1mm Vishay TJ6 +0 +2 +2 +Inductor_THT +L_Toroid_Horizontal_D40.0mm_P48.26mm +L_Toroid, Horizontal series, Radial, pin pitch=48.26mm, , diameter=40mm +L_Toroid Horizontal series Radial pin pitch 48.26mm diameter 40mm +0 +2 +2 +Inductor_THT +L_Toroid_Horizontal_D41.9mm_P37.60mm_Vishay_TJ7 +L_Toroid, Horizontal series, Radial, pin pitch=37.60mm, , diameter=41.9mm, Vishay, TJ7, http://www.vishay.com/docs/34079/tj.pdf +L_Toroid Horizontal series Radial pin pitch 37.60mm diameter 41.9mm Vishay TJ7 +0 +2 +2 +Inductor_THT +L_Toroid_Horizontal_D49.3mm_P44.60mm_Vishay_TJ8 +L_Toroid, Horizontal series, Radial, pin pitch=44.60mm, , diameter=49.3mm, Vishay, TJ8, http://www.vishay.com/docs/34079/tj.pdf +L_Toroid Horizontal series Radial pin pitch 44.60mm diameter 49.3mm Vishay TJ8 +0 +2 +2 +Inductor_THT +L_Toroid_Horizontal_D69.1mm_P63.20mm_Vishay_TJ9 +L_Toroid, Horizontal series, Radial, pin pitch=63.20mm, , diameter=69.1mm, Vishay, TJ9, http://www.vishay.com/docs/34079/tj.pdf +L_Toroid Horizontal series Radial pin pitch 63.20mm diameter 69.1mm Vishay TJ9 +0 +2 +2 +Inductor_THT +L_Toroid_Vertical_L10.0mm_W5.0mm_P5.08mm +L_Toroid, Vertical series, Radial, pin pitch=5.08mm, , length*width=10*5mm^2 +L_Toroid Vertical series Radial pin pitch 5.08mm length 10mm width 5mm +0 +2 +2 +Inductor_THT +L_Toroid_Vertical_L13.0mm_W6.5mm_P5.60mm +L_Toroid, Vertical series, Radial, pin pitch=5.60mm, , length*width=13*6.5mm^2 +L_Toroid Vertical series Radial pin pitch 5.60mm length 13mm width 6.5mm +0 +2 +2 +Inductor_THT +L_Toroid_Vertical_L14.0mm_W5.6mm_P5.30mm_Bourns_5700 +L_Toroid, Vertical series, Radial, pin pitch=5.30mm, , length*width=14*5.6mm^2, Bourns, 5700, http://www.bourns.com/docs/Product-Datasheets/5700_series.pdf +L_Toroid Vertical series Radial pin pitch 5.30mm length 14mm width 5.6mm Bourns 5700 +0 +2 +2 +Inductor_THT +L_Toroid_Vertical_L14.0mm_W6.3mm_P4.57mm_Pulse_A +L_Toroid, Vertical series, Radial, pin pitch=4.57mm, , length*width=13.97*6.35mm^2, Pulse, A, http://datasheet.octopart.com/PE-92112KNL-Pulse-datasheet-17853305.pdf +L_Toroid Vertical series Radial pin pitch 4.57mm length 13.97mm width 6.35mm Pulse A +0 +2 +2 +Inductor_THT +L_Toroid_Vertical_L14.7mm_W8.6mm_P5.58mm_Pulse_KM-1 +L_Toroid, Vertical series, Radial, pin pitch=5.58mm, , length*width=14.73*8.64mm^2, Pulse, KM-1, http://datasheet.octopart.com/PE-92112KNL-Pulse-datasheet-17853305.pdf +L_Toroid Vertical series Radial pin pitch 5.58mm length 14.73mm width 8.64mm Pulse KM-1 +0 +2 +2 +Inductor_THT +L_Toroid_Vertical_L16.0mm_W8.0mm_P7.62mm +L_Toroid, Vertical series, Radial, pin pitch=7.62mm, , length*width=16*8mm^2 +L_Toroid Vertical series Radial pin pitch 7.62mm length 16mm width 8mm +0 +2 +2 +Inductor_THT +L_Toroid_Vertical_L16.3mm_W7.1mm_P7.11mm_Pulse_H +L_Toroid, Vertical series, Radial, pin pitch=7.11mm, , length*width=16.26*7.11mm^2, Pulse, H, http://datasheet.octopart.com/PE-92112KNL-Pulse-datasheet-17853305.pdf +L_Toroid Vertical series Radial pin pitch 7.11mm length 16.26mm width 7.11mm Pulse H +0 +2 +2 +Inductor_THT +L_Toroid_Vertical_L16.4mm_W7.6mm_P6.60mm_Vishay_TJ3 +L_Toroid, Vertical series, Radial, pin pitch=6.60mm, , length*width=16.4*7.6mm^2, Vishay, TJ3, http://www.vishay.com/docs/34079/tj.pdf +L_Toroid Vertical series Radial pin pitch 6.60mm length 16.4mm width 7.6mm Vishay TJ3 +0 +2 +2 +Inductor_THT +L_Toroid_Vertical_L16.5mm_W11.4mm_P7.62mm_Pulse_KM-2 +L_Toroid, Vertical series, Radial, pin pitch=7.62mm, , length*width=16.51*11.43mm^2, Pulse, KM-2, http://datasheet.octopart.com/PE-92112KNL-Pulse-datasheet-17853305.pdf +L_Toroid Vertical series Radial pin pitch 7.62mm length 16.51mm width 11.43mm Pulse KM-2 +0 +2 +2 +Inductor_THT +L_Toroid_Vertical_L16.8mm_W9.2mm_P7.10mm_Vishay_TJ3 +L_Toroid, Vertical series, Radial, pin pitch=7.10mm, , length*width=16.8*9.2mm^2, Vishay, TJ3, http://www.vishay.com/docs/34079/tj.pdf +L_Toroid Vertical series Radial pin pitch 7.10mm length 16.8mm width 9.2mm Vishay TJ3 +0 +2 +2 +Inductor_THT +L_Toroid_Vertical_L16.8mm_W9.2mm_P7.10mm_Vishay_TJ3_BigPads +L_Toroid, Vertical series, Radial, pin pitch=7.10mm, , length*width=16.8*9.2mm^2, Vishay, TJ3, BigPads, http://www.vishay.com/docs/34079/tj.pdf +L_Toroid Vertical series Radial pin pitch 7.10mm length 16.8mm width 9.2mm Vishay TJ3 BigPads +0 +2 +2 +Inductor_THT +L_Toroid_Vertical_L17.8mm_W8.1mm_P7.62mm_Bourns_5700 +L_Toroid, Vertical series, Radial, pin pitch=7.62mm, , length*width=17.8*8.1mm^2, Bourns, 5700, http://www.bourns.com/docs/Product-Datasheets/5700_series.pdf +L_Toroid Vertical series Radial pin pitch 7.62mm length 17.8mm width 8.1mm Bourns 5700 +0 +2 +2 +Inductor_THT +L_Toroid_Vertical_L17.8mm_W9.7mm_P7.11mm_Pulse_B +L_Toroid, Vertical series, Radial, pin pitch=7.11mm, , length*width=17.78*9.65mm^2, Pulse, B, http://datasheet.octopart.com/PE-92112KNL-Pulse-datasheet-17853305.pdf +L_Toroid Vertical series Radial pin pitch 7.11mm length 17.78mm width 9.65mm Pulse B +0 +2 +2 +Inductor_THT +L_Toroid_Vertical_L19.1mm_W8.1mm_P7.10mm_Bourns_5700 +L_Toroid, Vertical series, Radial, pin pitch=7.10mm, , length*width=19.1*8.1mm^2, Bourns, 5700, http://www.bourns.com/docs/Product-Datasheets/5700_series.pdf +L_Toroid Vertical series Radial pin pitch 7.10mm length 19.1mm width 8.1mm Bourns 5700 +0 +2 +2 +Inductor_THT +L_Toroid_Vertical_L21.6mm_W8.4mm_P8.38mm_Pulse_G +L_Toroid, Vertical series, Radial, pin pitch=8.38mm, , length*width=21.59*8.38mm^2, Pulse, G, http://datasheet.octopart.com/PE-92112KNL-Pulse-datasheet-17853305.pdf +L_Toroid Vertical series Radial pin pitch 8.38mm length 21.59mm width 8.38mm Pulse G +0 +2 +2 +Inductor_THT +L_Toroid_Vertical_L21.6mm_W9.1mm_P8.40mm_Bourns_5700 +L_Toroid, Vertical series, Radial, pin pitch=8.40mm, , length*width=21.6*9.1mm^2, Bourns, 5700, http://www.bourns.com/docs/Product-Datasheets/5700_series.pdf +L_Toroid Vertical series Radial pin pitch 8.40mm length 21.6mm width 9.1mm Bourns 5700 +0 +2 +2 +Inductor_THT +L_Toroid_Vertical_L21.6mm_W9.5mm_P7.11mm_Pulse_C +L_Toroid, Vertical series, Radial, pin pitch=7.11mm, , length*width=21.59*9.53mm^2, Pulse, C, http://datasheet.octopart.com/PE-92112KNL-Pulse-datasheet-17853305.pdf +L_Toroid Vertical series Radial pin pitch 7.11mm length 21.59mm width 9.53mm Pulse C +0 +2 +2 +Inductor_THT +L_Toroid_Vertical_L21.6mm_W11.4mm_P7.62mm_Pulse_KM-3 +L_Toroid, Vertical series, Radial, pin pitch=7.62mm, , length*width=21.59*11.43mm^2, Pulse, KM-3, http://datasheet.octopart.com/PE-92112KNL-Pulse-datasheet-17853305.pdf +L_Toroid Vertical series Radial pin pitch 7.62mm length 21.59mm width 11.43mm Pulse KM-3 +0 +2 +2 +Inductor_THT +L_Toroid_Vertical_L22.4mm_W10.2mm_P7.90mm_Vishay_TJ4 +L_Toroid, Vertical series, Radial, pin pitch=7.90mm, , length*width=22.4*10.2mm^2, Vishay, TJ4, http://www.vishay.com/docs/34079/tj.pdf +L_Toroid Vertical series Radial pin pitch 7.90mm length 22.4mm width 10.2mm Vishay TJ4 +0 +2 +2 +Inductor_THT +L_Toroid_Vertical_L24.6mm_W15.5mm_P11.44mm_Pulse_KM-4 +L_Toroid, Vertical series, Radial, pin pitch=11.44mm, , length*width=24.64*15.5mm^2, Pulse, KM-4, http://datasheet.octopart.com/PE-92112KNL-Pulse-datasheet-17853305.pdf +L_Toroid Vertical series Radial pin pitch 11.44mm length 24.64mm width 15.5mm Pulse KM-4 +0 +2 +2 +Inductor_THT +L_Toroid_Vertical_L25.4mm_W14.7mm_P12.20mm_Vishay_TJ5 +L_Toroid, Vertical series, Radial, pin pitch=12.20mm, , length*width=25.4*14.7mm^2, Vishay, TJ5, http://www.vishay.com/docs/34079/tj.pdf +L_Toroid Vertical series Radial pin pitch 12.20mm length 25.4mm width 14.7mm Vishay TJ5 +0 +2 +2 +Inductor_THT +L_Toroid_Vertical_L25.4mm_W14.7mm_P12.20mm_Vishay_TJ5_BigPads +L_Toroid, Vertical series, Radial, pin pitch=12.20mm, , length*width=25.4*14.7mm^2, Vishay, TJ5, BigPads, http://www.vishay.com/docs/34079/tj.pdf +L_Toroid Vertical series Radial pin pitch 12.20mm length 25.4mm width 14.7mm Vishay TJ5 BigPads +0 +2 +2 +Inductor_THT +L_Toroid_Vertical_L26.7mm_W14.0mm_P10.16mm_Pulse_D +L_Toroid, Vertical series, Radial, pin pitch=10.16mm, , length*width=26.67*13.97mm^2, Pulse, D, http://datasheet.octopart.com/PE-92112KNL-Pulse-datasheet-17853305.pdf +L_Toroid Vertical series Radial pin pitch 10.16mm length 26.67mm width 13.97mm Pulse D +0 +2 +2 +Inductor_THT +L_Toroid_Vertical_L28.6mm_W14.3mm_P11.43mm_Bourns_5700 +L_Toroid, Vertical series, Radial, pin pitch=11.43mm, , length*width=28.6*14.3mm^2, Bourns, 5700, http://www.bourns.com/docs/Product-Datasheets/5700_series.pdf +L_Toroid Vertical series Radial pin pitch 11.43mm length 28.6mm width 14.3mm Bourns 5700 +0 +2 +2 +Inductor_THT +L_Toroid_Vertical_L31.8mm_W15.9mm_P13.50mm_Bourns_5700 +L_Toroid, Vertical series, Radial, pin pitch=13.50mm, , length*width=31.8*15.9mm^2, Bourns, 5700, http://www.bourns.com/docs/Product-Datasheets/5700_series.pdf +L_Toroid Vertical series Radial pin pitch 13.50mm length 31.8mm width 15.9mm Bourns 5700 +0 +2 +2 +Inductor_THT +L_Toroid_Vertical_L33.0mm_W17.8mm_P12.70mm_Pulse_KM-5 +L_Toroid, Vertical series, Radial, pin pitch=12.70mm, , length*width=33.02*17.78mm^2, Pulse, KM-5, http://datasheet.octopart.com/PE-92112KNL-Pulse-datasheet-17853305.pdf +L_Toroid Vertical series Radial pin pitch 12.70mm length 33.02mm width 17.78mm Pulse KM-5 +0 +2 +2 +Inductor_THT +L_Toroid_Vertical_L35.1mm_W21.1mm_P18.50mm_Vishay_TJ6 +L_Toroid, Vertical series, Radial, pin pitch=18.50mm, , length*width=35.1*21.1mm^2, Vishay, TJ6, http://www.vishay.com/docs/34079/tj.pdf +L_Toroid Vertical series Radial pin pitch 18.50mm length 35.1mm width 21.1mm Vishay TJ6 +0 +2 +2 +Inductor_THT +L_Toroid_Vertical_L35.6mm_W17.8mm_P12.70mm_Pulse_E +L_Toroid, Vertical series, Radial, pin pitch=12.70mm, , length*width=35.56*17.78mm^2, Pulse, E, http://datasheet.octopart.com/PE-92112KNL-Pulse-datasheet-17853305.pdf +L_Toroid Vertical series Radial pin pitch 12.70mm length 35.56mm width 17.78mm Pulse E +0 +2 +2 +Inductor_THT +L_Toroid_Vertical_L41.9mm_W17.8mm_P12.70mm_Pulse_F +L_Toroid, Vertical series, Radial, pin pitch=12.70mm, , length*width=41.91*17.78mm^2, Pulse, F, http://datasheet.octopart.com/PE-92112KNL-Pulse-datasheet-17853305.pdf +L_Toroid Vertical series Radial pin pitch 12.70mm length 41.91mm width 17.78mm Pulse F +0 +2 +2 +Inductor_THT +L_Toroid_Vertical_L41.9mm_W19.1mm_P15.80mm_Vishay_TJ7 +L_Toroid, Vertical series, Radial, pin pitch=15.80mm, , length*width=41.9*19.1mm^2, Vishay, TJ7, http://www.vishay.com/docs/34079/tj.pdf +L_Toroid Vertical series Radial pin pitch 15.80mm length 41.9mm width 19.1mm Vishay TJ7 +0 +2 +2 +Inductor_THT +L_Toroid_Vertical_L46.0mm_W19.1mm_P21.80mm_Bourns_5700 +L_Toroid, Vertical series, Radial, pin pitch=21.80mm, , length*width=46*19.1mm^2, Bourns, 5700, http://www.bourns.com/docs/Product-Datasheets/5700_series.pdf +L_Toroid Vertical series Radial pin pitch 21.80mm length 46mm width 19.1mm Bourns 5700 +0 +2 +2 +Inductor_THT +L_Toroid_Vertical_L48.8mm_W25.4mm_P20.80mm_Vishay_TJ8 +L_Toroid, Vertical series, Radial, pin pitch=20.80mm, , length*width=48.8*25.4mm^2, Vishay, TJ8, http://www.vishay.com/docs/34079/tj.pdf +L_Toroid Vertical series Radial pin pitch 20.80mm length 48.8mm width 25.4mm Vishay TJ8 +0 +2 +2 +Inductor_THT +L_Toroid_Vertical_L54.0mm_W23.8mm_P20.10mm_Bourns_5700 +L_Toroid, Vertical series, Radial, pin pitch=20.10mm, , length*width=54*23.8mm^2, Bourns, 5700, http://www.bourns.com/docs/Product-Datasheets/5700_series.pdf +L_Toroid Vertical series Radial pin pitch 20.10mm length 54mm width 23.8mm Bourns 5700 +0 +2 +2 +Inductor_THT +L_Toroid_Vertical_L67.6mm_W36.1mm_P31.80mm_Vishay_TJ9 +L_Toroid, Vertical series, Radial, pin pitch=31.80mm, , length*width=67.6*36.1mm^2, Vishay, TJ9, http://www.vishay.com/docs/34079/tj.pdf +L_Toroid Vertical series Radial pin pitch 31.80mm length 67.6mm width 36.1mm Vishay TJ9 +0 +2 +2 +Inductor_THT_Wurth +L_Wurth_WE-HCFT-2012_LeadDiameter1.2mm +Shielded High Current Inductor, body 17x22mm, https://www.we-online.com/catalog/en/WE-HCFT#/articles/WE-HCFT-2012-ROUND +THT +0 +2 +2 +Inductor_THT_Wurth +L_Wurth_WE-HCFT-2012_LeadDiameter1.5mm +Shielded High Current Inductor, body 17x22mm, https://www.we-online.com/catalog/en/WE-HCFT#/articles/WE-HCFT-2012-ROUND +THT +0 +2 +2 +Inductor_THT_Wurth +L_Wurth_WE-HCFT-2504 +Shielded High Current Inductor, body 22x25.7mm, https://www.we-online.com/catalog/en/WE-HCFT#/articles/WE-HCFT_SIZE_2504 +THT +0 +2 +2 +Inductor_THT_Wurth +L_Wurth_WE-HCFT-3521 +Shielded High Current Inductor, body 21.5x36mm, https://www.we-online.com/catalog/en/WE-HCFT#/articles/WE-HCFT-3521 +THT +0 +4 +2 +Inductor_THT_Wurth +L_Wurth_WE-HCFT-3533_LeadDiameter1.8mm +Shielded High Current Inductor, body 34.5x36mm, https://www.we-online.com/catalog/en/WE-HCFT#/articles/WE-HCFT-3533-ROUND +THT +0 +4 +2 +Inductor_THT_Wurth +L_Wurth_WE-HCFT-3533_LeadDiameter2.0mm +Shielded High Current Inductor, body 34.5x36mm, https://www.we-online.com/catalog/en/WE-HCFT#/articles/WE-HCFT-3533-ROUND +THT +0 +4 +2 +Inductor_THT_Wurth +L_Wurth_WE-HCFT-3540_LeadDiameter0.8mm +Shielded High Current Inductor, body 41x36mm, https://www.we-online.com/catalog/en/WE-HCFT#/articles/WE-HCFT-3540 +THT +0 +4 +2 +Inductor_THT_Wurth +L_Wurth_WE-HCFT-3540_LeadDiameter1.3mm +Shielded High Current Inductor, body 41x36mm, https://www.we-online.com/catalog/en/WE-HCFT#/articles/WE-HCFT-3540 +THT +0 +4 +2 +Inductor_THT_Wurth +L_Wurth_WE-HCFT-3540_LeadDiameter1.5mm +Shielded High Current Inductor, body 41x36mm, https://www.we-online.com/catalog/en/WE-HCFT#/articles/WE-HCFT-3540 +THT +0 +4 +2 +Inductor_THT_Wurth +L_Wurth_WE-HCFT-3540_LeadDiameter2.0mm +Shielded High Current Inductor, body 41x36mm, https://www.we-online.com/catalog/en/WE-HCFT#/articles/WE-HCFT-3540 +THT +0 +4 +2 +Jumper +SolderJumper-2_P1.3mm_Bridged2Bar_Pad1.0x1.5mm +SMD Solder Jumper, 1x1.5mm Pads, 0.3mm gap, bridged with 2 copper strips +net tie solder jumper bridged +0 +2 +2 +Jumper +SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mm +SMD Solder Jumper, 1x1.5mm, rounded Pads, 0.3mm gap, bridged with 2 copper strips +net tie solder jumper bridged +0 +2 +2 +Jumper +SolderJumper-2_P1.3mm_Bridged_Pad1.0x1.5mm +SMD Solder Jumper, 1x1.5mm Pads, 0.3mm gap, bridged with 1 copper strip +net tie solder jumper bridged +0 +2 +2 +Jumper +SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm +SMD Solder Jumper, 1x1.5mm, rounded Pads, 0.3mm gap, bridged with 1 copper strip +net tie solder jumper bridged +0 +2 +2 +Jumper +SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mm +SMD Solder Jumper, 1x1.5mm Pads, 0.3mm gap, open +solder jumper open +0 +2 +2 +Jumper +SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm +SMD Solder Jumper, 1x1.5mm, rounded Pads, 0.3mm gap, open +solder jumper open +0 +2 +2 +Jumper +SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm +SMD Solder Jumper, 1x1.5mm Triangular Pads, 0.3mm gap, open +solder jumper open +0 +2 +2 +Jumper +SolderJumper-3_P1.3mm_Bridged2Bar12_Pad1.0x1.5mm +SMD Solder 3-pad Jumper, 1x1.5mm Pads, 0.3mm gap, pads 1-2 Bridged2Bar with 2 copper strip +net tie solder jumper bridged +0 +3 +3 +Jumper +SolderJumper-3_P1.3mm_Bridged2Bar12_Pad1.0x1.5mm_NumberLabels +SMD Solder Jumper, 1x1.5mm Pads, 0.3mm gap, pads 1-2 Bridged2Bar with 2 copper strip, labeled with numbers +net tie solder jumper bridged +0 +3 +3 +Jumper +SolderJumper-3_P1.3mm_Bridged2Bar12_RoundedPad1.0x1.5mm +SMD Solder 3-pad Jumper, 1x1.5mm rounded Pads, 0.3mm gap, pads 1-2 Bridged2Bar with 2 copper strip +net tie solder jumper bridged +0 +3 +3 +Jumper +SolderJumper-3_P1.3mm_Bridged2Bar12_RoundedPad1.0x1.5mm_NumberLabels +SMD Solder 3-pad Jumper, 1x1.5mm rounded Pads, 0.3mm gap, pads 1-2 Bridged2Bar with 2 copper strip, labeled with numbers +net tie solder jumper bridged +0 +3 +3 +Jumper +SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mm +SMD Solder 3-pad Jumper, 1x1.5mm Pads, 0.3mm gap, pads 1-2 bridged with 1 copper strip +net tie solder jumper bridged +0 +3 +3 +Jumper +SolderJumper-3_P1.3mm_Bridged12_Pad1.0x1.5mm_NumberLabels +SMD Solder Jumper, 1x1.5mm Pads, 0.3mm gap, pads 1-2 bridged with 1 copper strip, labeled with numbers +net tie solder jumper bridged +0 +3 +3 +Jumper +SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm +SMD Solder 3-pad Jumper, 1x1.5mm rounded Pads, 0.3mm gap, pads 1-2 bridged with 1 copper strip +net tie solder jumper bridged +0 +3 +3 +Jumper +SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm_NumberLabels +SMD Solder 3-pad Jumper, 1x1.5mm rounded Pads, 0.3mm gap, pads 1-2 bridged with 1 copper strip, labeled with numbers +net tie solder jumper bridged +0 +3 +3 +Jumper +SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm +SMD Solder 3-pad Jumper, 1x1.5mm Pads, 0.3mm gap, open +solder jumper open +0 +3 +3 +Jumper +SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm_NumberLabels +SMD Solder Jumper, 1x1.5mm Pads, 0.3mm gap, open, labeled with numbers +solder jumper open +0 +3 +3 +Jumper +SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm +SMD Solder 3-pad Jumper, 1x1.5mm rounded Pads, 0.3mm gap, open +solder jumper open +0 +3 +3 +Jumper +SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels +SMD Solder 3-pad Jumper, 1x1.5mm rounded Pads, 0.3mm gap, open, labeled with numbers +solder jumper open +0 +3 +3 +Jumper +SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mm +SMD Solder Jumper, 1x1.5mm Triangular Pads, 0.3mm gap, open +solder jumper open +0 +5 +3 +Jumper +SolderJumper-3_P2.0mm_Open_TrianglePad1.0x1.5mm_NumberLabels +SMD Solder Jumper, 1x1.5mm Triangular Pads, 0.3mm gap, open, labeled with numbers +solder jumper open +0 +5 +3 +LED_SMD +LED-APA102-2020 +http://www.led-color.com/upload/201604/APA102-2020%20SMD%20LED.pdf +LED RGB SPI +0 +8 +6 +LED_SMD +LED-L1T2_LUMILEDS +http://www.lumileds.com/uploads/438/DS133-pdf +LUMILEDS LUXEON TX L1T2 LED +0 +3 +3 +LED_SMD +LED_1W_3W_R8 +https://www.gme.cz/data/attachments/dsh.518-234.1.pdf +LED 1W 3W 5W +0 +3 +3 +LED_SMD +LED_0201_0603Metric +LED SMD 0201 (0603 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://www.vishay.com/docs/20052/crcw0201e3.pdf), generated with kicad-footprint-generator +LED +0 +4 +2 +LED_SMD +LED_0201_0603Metric_Pad0.64x0.40mm_HandSolder +LED SMD 0201 (0603 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://www.vishay.com/docs/20052/crcw0201e3.pdf), generated with kicad-footprint-generator +LED handsolder +0 +4 +2 +LED_SMD +LED_0402_1005Metric +LED SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +LED +0 +2 +2 +LED_SMD +LED_0402_1005Metric_Pad0.77x0.64mm_HandSolder +LED SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +LED handsolder +0 +2 +2 +LED_SMD +LED_0603_1608Metric +LED SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +LED +0 +2 +2 +LED_SMD +LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder +LED SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +LED handsolder +0 +2 +2 +LED_SMD +LED_0805_2012Metric +LED SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator +LED +0 +2 +2 +LED_SMD +LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder +LED SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://docs.google.com/spreadsheets/d/1BsfQQcO9C6DZCsRaXUlFlo91Tg2WpOkGARC1WS5S8t0/edit?usp=sharing), generated with kicad-footprint-generator +LED handsolder +0 +2 +2 +LED_SMD +LED_1206_3216Metric +LED SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +LED +0 +2 +2 +LED_SMD +LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder +LED SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +LED handsolder +0 +2 +2 +LED_SMD +LED_1206_3216Metric_ReverseMount_Hole1.8x2.4mm +LED SMD 1206 (3216 Metric), reverse mount, square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +diode reverse +0 +2 +2 +LED_SMD +LED_1210_3225Metric +LED SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +LED +0 +2 +2 +LED_SMD +LED_1210_3225Metric_Pad1.42x2.65mm_HandSolder +LED SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +LED handsolder +0 +2 +2 +LED_SMD +LED_1812_4532Metric +LED SMD 1812 (4532 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://www.nikhef.nl/pub/departments/mt/projects/detectorR_D/dtddice/ERJ2G.pdf), generated with kicad-footprint-generator +LED +0 +2 +2 +LED_SMD +LED_1812_4532Metric_Pad1.30x3.40mm_HandSolder +LED SMD 1812 (4532 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://www.nikhef.nl/pub/departments/mt/projects/detectorR_D/dtddice/ERJ2G.pdf), generated with kicad-footprint-generator +LED handsolder +0 +2 +2 +LED_SMD +LED_2010_5025Metric +LED SMD 2010 (5025 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +LED +0 +2 +2 +LED_SMD +LED_2010_5025Metric_Pad1.52x2.65mm_HandSolder +LED SMD 2010 (5025 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +LED handsolder +0 +2 +2 +LED_SMD +LED_2512_6332Metric +LED SMD 2512 (6332 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +LED +0 +2 +2 +LED_SMD +LED_2512_6332Metric_Pad1.52x3.35mm_HandSolder +LED SMD 2512 (6332 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.tortai-tech.com/upload/download/2011102023233369053.pdf), generated with kicad-footprint-generator +LED handsolder +0 +2 +2 +LED_SMD +LED_ASMB-KTF0-0A306 +2220 Tricolor PLCC-4 LED, https://docs.broadcom.com/docs/ASMB-KTF0-0A306-DS100 +Tricolor LED +0 +4 +4 +LED_SMD +LED_Avago_PLCC4_3.2x2.8mm_CW +3.2mm x 2.8mm PLCC4 RGB LED, https://docs.broadcom.com/docs/AV02-4186EN +LED Avago PLCC-4 3528 ASMB-MTB0-0A3A2 +0 +4 +4 +LED_SMD +LED_Avago_PLCC6_3x2.8mm +https://docs.broadcom.com/docs/AV02-3793EN +LED Avago PLCC-6 ASMT-YTB7-0AA02 +0 +6 +6 +LED_SMD +LED_CSP_Samsung_LH181B_2.36x2.36mm +High Power CSP LED, 2.36mm x 2.36mm, 1.4A max, https://cdn.samsung.com/led/file/resource/2021/01/Data_Sheet_LH181B_Rev.4.0.pdf +LED Samsung LH181B +0 +2 +2 +LED_SMD +LED_Cree-PLCC4_2x2mm_CW +2.0mm x 2.0mm PLCC4 LED, https://assets.cree-led.com/a/ds/h/HB-CLMVC-FKA.pdf +LED Cree PLCC-4 2020 CLMVB-FKA CLMVC-FKA +0 +4 +4 +LED_SMD +LED_Cree-PLCC4_3.2x2.8mm_CCW +3.2mm x 2.8mm PLCC4 RGB LED, https://assets.cree-led.com/a/ds/h/HB-CLV1A-FKB.pdf +LED Cree PLCC-4 3528 CLV1A-FKB +0 +4 +4 +LED_SMD +LED_Cree-PLCC4_5x5mm_CW +5.0mm x 5.0mm PLCC4 LED +LED Cree PLCC-4 5050 +0 +4 +4 +LED_SMD +LED_Cree-PLCC6_4.7x1.5mm +4.7mm x 1.5mm PLCC6 LED, http://www.cree.com/led-components/media/documents/1381-QLS6AFKW.pdf +LED Cree PLCC-6 +0 +6 +6 +LED_SMD +LED_Cree-XB +http://www.cree.com/~/media/Files/Cree/LED-Components-and-Modules/XLamp/Data-and-Binning/XLampXBD.pdf +LED Cree XB +0 +5 +3 +LED_SMD +LED_Cree-XH +http://www.cree.com/~/media/Files/Cree/LED-Components-and-Modules/XLamp/Data-and-Binning/ds-XHB.pdf +LED Cree XH +0 +8 +2 +LED_SMD +LED_Cree-XHP35 +http://www.cree.com/~/media/Files/Cree/LED-Components-and-Modules/XLamp/Data-and-Binning/ds--XHP35.pdf +LED Cree XHP35 +0 +6 +3 +LED_SMD +LED_Cree-XHP50_6V +Cree XHP50, 6V footprint, http://www.cree.com/~/media/Files/Cree/LED%20Components%20and%20Modules/XLamp/Data%20and%20Binning/ds%20XHP50.pdf +LED Cree XHP50 +0 +15 +3 +LED_SMD +LED_Cree-XHP50_12V +Cree XHP50, 12V footprint, http://www.cree.com/~/media/Files/Cree/LED%20Components%20and%20Modules/XLamp/Data%20and%20Binning/ds%20XHP50.pdf +LED XHP50 Cree +0 +15 +3 +LED_SMD +LED_Cree-XHP70_6V +Cree XHP70 LED, 6V version, http://www.cree.com/~/media/Files/Cree/LED%20Components%20and%20Modules/XLamp/Data%20and%20Binning/ds%20XHP70.pdf +LED Cree XHP70 +0 +15 +3 +LED_SMD +LED_Cree-XHP70_12V +Cree XHP70 LED, 12V version, http://www.cree.com/~/media/Files/Cree/LED%20Components%20and%20Modules/XLamp/Data%20and%20Binning/ds%20XHP70.pdf +LED Cree XHP70 +0 +15 +3 +LED_SMD +LED_Cree-XP +LED Cree-XP http://www.cree.com/~/media/Files/Cree/LED-Components-and-Modules/XLamp/Data-and-Binning/XLampXPE2.pdf +LED Cree XP +0 +6 +3 +LED_SMD +LED_Cree-XP-G +LED Cree-XP-G http://www.cree.com/~/media/Files/Cree/LED%20Components%20and%20Modules/XLamp/Data%20and%20Binning/XLampXPG.pdf +LED Cree XP-G +0 +6 +3 +LED_SMD +LED_Cree-XQ +LED Cree-XQ http://www.cree.com/~/media/Files/Cree/LED-Components-and-Modules/XLamp/Data-and-Binning/ds-XQB.pdf +LED Cree XQ +0 +2 +2 +LED_SMD +LED_Cree-XQ_HandSoldering +LED Cree-XQ handsoldering pads http://www.cree.com/~/media/Files/Cree/LED-Components-and-Modules/XLamp/Data-and-Binning/ds-XQB.pdf +LED Cree XQ +0 +2 +2 +LED_SMD +LED_Dialight_591 +LED SMD 3mm Right Angle series (http://www.dialightsignalsandcomponents.com/Assets/Drawings/2D_Drawings_DrawingDetailedSpec/C17354.pdf) +LED Dialight 591 +0 +2 +2 +LED_SMD +LED_Inolux_IN-PI554FCH_PLCC4_5.0x5.0mm_P3.2mm +5.0mm x 5.0mm PLCC4 Addressable RGB LED, http://www.inolux-corp.com/datasheet/SMDLED/Addressable%20LED/IN-PI554FCH.pdf +LED RGB NeoPixel addressable PLCC-4 5050 +0 +4 +4 +LED_SMD +LED_Kingbright_AAA3528ESGCT +Kingbright, dual LED, 3.5 x 2.8 mm Surface Mount LED Lamp (http://www.kingbrightusa.com/images/catalog/SPEC/AAA3528ESGCT.pdf) +dual led smd +0 +4 +4 +LED_SMD +LED_Kingbright_APDA3020VBCD +LED, SMD, APDA3020VBC/D, https://www.kingbrightusa.com/images/catalog/SPEC/APDA3020VBC-D.pdf +LED APDA3020VBC/D Kingbright +0 +2 +2 +LED_SMD +LED_Kingbright_APFA3010_3x1.5mm_Horizontal +LED RGB, APFA3010, http://www.kingbrightusa.com/images/catalog/SPEC/APFA3010LSEEZGKQBKC.pdf +LED RGB APFA3010 KINGBRIGHT 3x1.5mm +0 +4 +4 +LED_SMD +LED_Kingbright_APHBM2012_2x1.25mm +Dual LED SMD https://www.kingbrightusa.com/KCpack.asp?txtPack=APHBM2012 +LED Kingbright APHM2012 +0 +4 +4 +LED_SMD +LED_Kingbright_KPA-3010_3x2x1mm +Kingbright surface mount LED, right angle, 3.0 x 2.0 x 1.0 mm, https://www.kingbright.com/attachments/file/psearch/000/00/00/KPA-3010SURCK(Ver.26A).pdf +Kingbright LED right-angle +0 +3 +3 +LED_SMD +LED_Kingbright_KPBD-3224 +Kingbright, dual LED, red-green, dome lens, 3.2 x 2.4 mm Surface Mount LED Lamp (https://www.kingbright.com/attachments/file/psearch/000/00/00/KPBD-3224SURKCGKC(Ver.20A).pdf) +Kingbright dual LED KPBD-3224 +0 +4 +4 +LED_SMD +LED_LiteOn_LTST-C19HE1WT +LiteOn RGB LED; https://optoelectronics.liteon.com/upload/download/DS22-2008-0044/LTST-C19HE1WT.pdf +LED RGB Chip SMD +0 +4 +4 +LED_SMD +LED_LiteOn_LTST-C295K_1.6x0.8mm +Topview dual http://optoelectronics.liteon.com/upload/download/DS22-2009-0072/LTST-C295KGKRKT.PDF +SMD Top view Dual colour +0 +4 +4 +LED_SMD +LED_LiteOn_LTST-E563C_PLCC4_5.0x5.0mm_P3.2mm +RGB addressable LED, 5x5mm body, 1.57mm height, https://optoelectronics.liteon.com/upload/download/DS35-2018-0092/LTST-E563CHEGBW-AW.PDF +LED RGB 5050 PLCC-4 +0 +4 +4 +LED_SMD +LED_LiteOn_LTST-E563C_PLCC4_5.0x5.0mm_P3.2mm_HandSoldering +RGB addressable LED, 5x5mm body, 1.57mm height, https://optoelectronics.liteon.com/upload/download/DS35-2018-0092/LTST-E563CHEGBW-AW.PDF +LED RGB 5050 PLCC-4 +0 +4 +4 +LED_SMD +LED_LiteOn_LTST-S326 +http://optoelectronics.liteon.com/upload/download/DS22-2000-287/LTST-S326KGJRKT.PDF +LED SMD right angle CCA +0 +3 +3 +LED_SMD +LED_Lumex_SML-LX0303SIUPGUSB +Lumex RGB LED, clear, SMD, https://www.lumex.com/spec/SML-LX0303SIUPGUSB.pdf +LED RGB +0 +4 +4 +LED_SMD +LED_Lumex_SML-LX0404SIUPGUSB +Lumex RGB LED, clear, SMD, https://www.lumex.com/spec/SML-LX0404SIUPGUSB.pdf +LED RGB +0 +4 +4 +LED_SMD +LED_Luminus_MP-3030-1100_3.0x3.0mm +Mid Power LED, Luminus MP-3030-1100, 3.0x3.0mm, 816mW, https://download.luminus.com/datasheets/Luminus_MP3030_1100_Datasheet.pdf +LED Luminus MP-3030-1100 +0 +5 +2 +LED_SMD +LED_Osram_Lx_P47F_D2mm_ReverseMount +OSRAM, reverse-mount LED, SMD, 2mm diameter, http://www.farnell.com/datasheets/2711587.pdf +LED ReverseMount Reverse +0 +4 +2 +LED_SMD +LED_PLCC-2_3.4x3.0mm_AK +LED PLCC-2 SMD package, orientation marker at anode, https://dammedia.osram.info/media/resource/hires/osram-dam-5824137/SFH%204257_EN.pdf +LED PLCC-2 SMD TOPLED +0 +2 +2 +LED_SMD +LED_PLCC-2_3.4x3.0mm_KA +LED PLCC-2 SMD package, orientation marker at cathode, https://dammedia.osram.info/media/resource/hires/osram-dam-6035009/SFH%204253_EN.pdf +LED PLCC-2 SMD TOPLED +0 +2 +2 +LED_SMD +LED_PLCC-2_3x2mm_AK +LED, SMD, PLCC-2, 3.0 x 2.0mm, orientation marker at anode, https://media.digikey.com/pdf/Data%20Sheets/CREE%20Power/CLM3A-BKW,GKW.pdf +LED PLCC-2 SMD +0 +2 +2 +LED_SMD +LED_PLCC-2_3x2mm_KA +LED, SMD, PLCC-2, 3.0 x 2.0mm, orientation marker at cathode, https://optoelectronics.liteon.com/upload/download/DS22-2009-0099/LTW-M670ZVS-M5_0906.pdf +LED PLCC-2 SMD +0 +2 +2 +LED_SMD +LED_PLCC_2835 +https://www.luckylight.cn/media/component/data-sheet/R2835BC-B2M-M10.pdf +LED +0 +2 +2 +LED_SMD +LED_PLCC_2835_Handsoldering +https://www.luckylight.cn/media/component/data-sheet/R2835BC-B2M-M10.pdf +LED +0 +2 +2 +LED_SMD +LED_RGB_1210 +RGB LED 3.2x2.7mm http://www.avagotech.com/docs/AV02-0610EN +LED 3227 +0 +4 +4 +LED_SMD +LED_RGB_5050-6 +http://cdn.sparkfun.com/datasheets/Components/LED/5060BRG4.pdf +RGB LED 5050-6 +0 +6 +6 +LED_SMD +LED_RGB_Cree-PLCC-6_6x5mm_P2.1mm +http://www.farnell.com/datasheets/2003905.pdf +LED RGB PLCC-6 CLP6C-FBK +0 +6 +6 +LED_SMD +LED_RGB_Everlight_EASV3015RGBA0_Horizontal +LED, RGB, right-angle, clear, https://everlightamericas.com/index.php?controller=attachment&id_attachment=3220 +LED RGB right-angle +0 +4 +4 +LED_SMD +LED_RGB_Getian_GT-P6PRGB4303 +https://www.gme.sk/img/cache/doc/518/177/vykonova-led-getian-gt-p6prgb4303-datasheet-1.pdf +LED RGB +0 +7 +7 +LED_SMD +LED_RGB_PLCC-6 +RGB LED PLCC-6 +RGB LED PLCC-6 +0 +6 +6 +LED_SMD +LED_RGB_Wuerth-PLCC4_3.2x2.8mm_150141M173100 +3.2mm x 2.8mm PLCC4 LED, https://www.we-online.de/katalog/datasheet/150141M173100.pdf +LED RGB Wurth PLCC-4 3528 +0 +4 +4 +LED_SMD +LED_ROHM_SMLVN6 +https://www.rohm.com/datasheet/SMLVN6RGB1U +LED ROHM SMLVN6 +0 +6 +6 +LED_SMD +LED_SK6805_PLCC4_2.4x2.7mm_P1.3mm +https://cdn-shop.adafruit.com/product-files/3484/3484_Datasheet.pdf +LED RGB NeoPixel Nano PLCC-4 +0 +4 +4 +LED_SMD +LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm +3.5mm x 3.5mm PLCC4 Addressable RGB LED NeoPixel, https://cdn-shop.adafruit.com/product-files/2686/SK6812MINI_REV.01-1-2.pdf +LED RGB NeoPixel Mini PLCC-4 3535 +0 +4 +4 +LED_SMD +LED_SK6812_EC15_1.5x1.5mm +RGB addressable LED, 0.1W, 1.5mm x 1.5mm, 0.65m height, orientation mark at GND, http://ledstrip-china.com/productshow.asp?id=322 +LED RGB NeoPixel +0 +4 +4 +LED_SMD +LED_SK6812_PLCC4_5.0x5.0mm_P3.2mm +5.0mm x 5.0mm Addressable RGB LED NeoPixel, https://cdn-shop.adafruit.com/product-files/1138/SK6812+LED+datasheet+.pdf +LED RGB NeoPixel PLCC-4 5050 +0 +4 +4 +LED_SMD +LED_WS2812B-2020_PLCC4_2.0x2.0mm +2.0mm x 2.0mm Addressable RGB LED NeoPixel Nano, 12 mA, https://cdn-shop.adafruit.com/product-files/4684/4684_WS2812B-2020_V1.3_EN.pdf +LED RGB NeoPixel Nano PLCC-4 2020 +0 +4 +4 +LED_SMD +LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm +5.0mm x 5.0mm Addressable RGB LED NeoPixel, https://cdn-shop.adafruit.com/datasheets/WS2812B.pdf +LED RGB NeoPixel PLCC-4 5050 +0 +4 +4 +LED_SMD +LED_WS2812_PLCC6_5.0x5.0mm_P1.6mm +https://cdn-shop.adafruit.com/datasheets/WS2812.pdf +LED RGB NeoPixel +0 +6 +6 +LED_SMD +LED_Wurth_150044M155260 +Wurth Common anode RGB LED, SMD, 0404, 1x1x1.65mm, https://www.we-online.com/catalog/datasheet/150044M155260.pdf +LED RGB ARGB +0 +4 +4 +LED_SMD +LED_Yuji_5730 +LED,Yuji,5730,https://cdn.shopify.com/s/files/1/0344/6401/files/YJWJ014-1.1_YJ-BC-5730L-G02.pdf +LED Yuji 5730 +0 +3 +2 +LED_SMD +LED_miniPLCC_2315 +https://docs.broadcom.com/cs/Satellite?blobcol=urldata&blobheader=application%2Fpdf&blobheadername1=Content-Disposition&blobheadername2=Content-Type&blobheadername3=MDT-Type&blobheadervalue1=attachment%3Bfilename%3DAV02-2205EN_DS_ASMT-TxBM_2014-05-09.pdf&blobheadervalue2=application%2Fx-download&blobheadervalue3=abinary%253B%2Bcharset%253DUTF-8&blobkey=id&blobnocache=true&blobtable=MungoBlobs&blobwhere=1430858274704&ssbinary=true +LED +0 +2 +2 +LED_SMD +LED_miniPLCC_2315_Handsoldering +https://docs.broadcom.com/cs/Satellite?blobcol=urldata&blobheader=application%2Fpdf&blobheadername1=Content-Disposition&blobheadername2=Content-Type&blobheadername3=MDT-Type&blobheadervalue1=attachment%3Bfilename%3DAV02-2205EN_DS_ASMT-TxBM_2014-05-09.pdf&blobheadervalue2=application%2Fx-download&blobheadervalue3=abinary%253B%2Bcharset%253DUTF-8&blobkey=id&blobnocache=true&blobtable=MungoBlobs&blobwhere=1430858274704&ssbinary=true +LED +0 +2 +2 +LED_THT +LED_BL-FL7680RGB +'Piranha' RGB LED, through hole, common anode, 7.62x7.62mm, BGRA pin order, https://cdn-shop.adafruit.com/datasheets/BL-FL7680RGB.pdf +RGB LED Piranha Super-Flux BetLux +0 +4 +4 +LED_THT +LED_D1.8mm_W1.8mm_H2.4mm_Horizontal_O1.27mm_Z1.6mm +LED, , diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm, 2 pins +LED diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm 2 pins +0 +2 +2 +LED_THT +LED_D1.8mm_W1.8mm_H2.4mm_Horizontal_O1.27mm_Z4.9mm +LED, , diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm, 2 pins, diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm, 2 pins, diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm, 2 pins, diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 4.9mm, 2 pins +LED diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm 2 pins diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm 2 pins diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm 2 pins diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 4.9mm 2 pins +0 +2 +2 +LED_THT +LED_D1.8mm_W1.8mm_H2.4mm_Horizontal_O1.27mm_Z8.2mm +LED, , diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm, 2 pins, diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm, 2 pins, diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm, 2 pins, diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 4.9mm, 2 pins, diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 4.9mm, 2 pins, diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 4.9mm, 2 pins, diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 8.2mm, 2 pins +LED diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm 2 pins diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm 2 pins diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm 2 pins diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 4.9mm 2 pins diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 4.9mm 2 pins diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 4.9mm 2 pins diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 8.2mm 2 pins +0 +2 +2 +LED_THT +LED_D1.8mm_W1.8mm_H2.4mm_Horizontal_O3.81mm_Z1.6mm +LED, , diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm, 2 pins, diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm, 2 pins +LED diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm 2 pins diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm 2 pins +0 +2 +2 +LED_THT +LED_D1.8mm_W1.8mm_H2.4mm_Horizontal_O3.81mm_Z4.9mm +LED, , diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm, 2 pins, diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm, 2 pins, diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm, 2 pins, diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 4.9mm, 2 pins, diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 4.9mm, 2 pins +LED diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm 2 pins diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm 2 pins diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm 2 pins diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 4.9mm 2 pins diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 4.9mm 2 pins +0 +2 +2 +LED_THT +LED_D1.8mm_W1.8mm_H2.4mm_Horizontal_O3.81mm_Z8.2mm +LED, , diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm, 2 pins, diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm, 2 pins, diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm, 2 pins, diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 4.9mm, 2 pins, diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 4.9mm, 2 pins, diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 4.9mm, 2 pins, diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 8.2mm, 2 pins, diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 8.2mm, 2 pins +LED diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm 2 pins diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm 2 pins diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm 2 pins diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 4.9mm 2 pins diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 4.9mm 2 pins diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 4.9mm 2 pins diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 8.2mm 2 pins diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 8.2mm 2 pins +0 +2 +2 +LED_THT +LED_D1.8mm_W1.8mm_H2.4mm_Horizontal_O6.35mm_Z1.6mm +LED, , diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm, 2 pins, diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm, 2 pins, diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm, 2 pins +LED diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm 2 pins diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm 2 pins diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm 2 pins +0 +2 +2 +LED_THT +LED_D1.8mm_W1.8mm_H2.4mm_Horizontal_O6.35mm_Z4.9mm +LED, , diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm, 2 pins, diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm, 2 pins, diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm, 2 pins, diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 4.9mm, 2 pins, diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 4.9mm, 2 pins, diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 4.9mm, 2 pins +LED diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm 2 pins diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm 2 pins diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm 2 pins diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 4.9mm 2 pins diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 4.9mm 2 pins diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 4.9mm 2 pins +0 +2 +2 +LED_THT +LED_D1.8mm_W1.8mm_H2.4mm_Horizontal_O6.35mm_Z8.2mm +LED, , diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm, 2 pins, diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm, 2 pins, diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm, 2 pins, diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 4.9mm, 2 pins, diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 4.9mm, 2 pins, diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 4.9mm, 2 pins, diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 8.2mm, 2 pins, diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 8.2mm, 2 pins, diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 8.2mm, 2 pins +LED diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm 2 pins diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm 2 pins diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm 2 pins diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 4.9mm 2 pins diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 4.9mm 2 pins diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 4.9mm 2 pins diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 8.2mm 2 pins diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 8.2mm 2 pins diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 8.2mm 2 pins +0 +2 +2 +LED_THT +LED_D1.8mm_W3.3mm_H2.4mm +LED, Round, Rectangular size 3.3x2.4mm^2 diameter 1.8mm, 2 pins +LED Round Rectangular size 3.3x2.4mm^2 diameter 1.8mm 2 pins +0 +2 +2 +LED_THT +LED_D2.0mm_W4.0mm_H2.8mm_FlatTop +LED, Round, FlatTop, Rectangular size 4.0x2.8mm^2 diameter 2.0mm, 2 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-1034IDT(Ver.9A).pdf +LED Round FlatTop Rectangular size 4.0x2.8mm^2 diameter 2.0mm 2 pins +0 +2 +2 +LED_THT +LED_D2.0mm_W4.8mm_H2.5mm_FlatTop +LED, Round, FlatTop, Rectangular size 4.8x2.5mm^2 diameter 2.0mm, 2 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-13GD(Ver.11B).pdf +LED Round FlatTop Rectangular size 4.8x2.5mm^2 diameter 2.0mm 2 pins +0 +2 +2 +LED_THT +LED_D3.0mm +LED, diameter 3.0mm, 2 pins +LED diameter 3.0mm 2 pins +0 +2 +2 +LED_THT +LED_D3.0mm-3 +LED, diameter 3.0mm, 2 pins, diameter 3.0mm, 3 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-3VSURKCGKC(Ver.8A).pdf +LED diameter 3.0mm 2 pins diameter 3.0mm 3 pins +0 +3 +3 +LED_THT +LED_D3.0mm_Clear +IR-LED, diameter 3.0mm, 2 pins, color: clear +IR infrared LED diameter 3.0mm 2 pins clear +0 +2 +2 +LED_THT +LED_D3.0mm_FlatTop +LED, Round, FlatTop, diameter 3.0mm, 2 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-47XEC(Ver.9A).pdf +LED Round FlatTop diameter 3.0mm 2 pins +0 +2 +2 +LED_THT +LED_D3.0mm_Horizontal_O1.27mm_Z2.0mm +LED, diameter 3.0mm z-position of LED center 2.0mm, 2 pins +LED diameter 3.0mm z-position of LED center 2.0mm 2 pins +0 +2 +2 +LED_THT +LED_D3.0mm_Horizontal_O1.27mm_Z2.0mm_Clear +LED, diameter 3.0mm z-position of LED center 2.0mm, 2 pins +LED diameter 3.0mm z-position of LED center 2.0mm 2 pins +0 +2 +2 +LED_THT +LED_D3.0mm_Horizontal_O1.27mm_Z2.0mm_IRBlack +LED, diameter 3.0mm z-position of LED center 2.0mm, 2 pins +LED diameter 3.0mm z-position of LED center 2.0mm 2 pins +0 +2 +2 +LED_THT +LED_D3.0mm_Horizontal_O1.27mm_Z2.0mm_IRGrey +LED, diameter 3.0mm z-position of LED center 2.0mm, 2 pins +LED diameter 3.0mm z-position of LED center 2.0mm 2 pins +0 +2 +2 +LED_THT +LED_D3.0mm_Horizontal_O1.27mm_Z6.0mm +LED, diameter 3.0mm z-position of LED center 2.0mm, 2 pins, diameter 3.0mm z-position of LED center 2.0mm, 2 pins, diameter 3.0mm z-position of LED center 2.0mm, 2 pins, diameter 3.0mm z-position of LED center 6.0mm, 2 pins +LED diameter 3.0mm z-position of LED center 2.0mm 2 pins diameter 3.0mm z-position of LED center 2.0mm 2 pins diameter 3.0mm z-position of LED center 2.0mm 2 pins diameter 3.0mm z-position of LED center 6.0mm 2 pins +0 +2 +2 +LED_THT +LED_D3.0mm_Horizontal_O1.27mm_Z10.0mm +LED, diameter 3.0mm z-position of LED center 2.0mm, 2 pins, diameter 3.0mm z-position of LED center 2.0mm, 2 pins, diameter 3.0mm z-position of LED center 2.0mm, 2 pins, diameter 3.0mm z-position of LED center 6.0mm, 2 pins, diameter 3.0mm z-position of LED center 6.0mm, 2 pins, diameter 3.0mm z-position of LED center 6.0mm, 2 pins, diameter 3.0mm z-position of LED center 10.0mm, 2 pins +LED diameter 3.0mm z-position of LED center 2.0mm 2 pins diameter 3.0mm z-position of LED center 2.0mm 2 pins diameter 3.0mm z-position of LED center 2.0mm 2 pins diameter 3.0mm z-position of LED center 6.0mm 2 pins diameter 3.0mm z-position of LED center 6.0mm 2 pins diameter 3.0mm z-position of LED center 6.0mm 2 pins diameter 3.0mm z-position of LED center 10.0mm 2 pins +0 +2 +2 +LED_THT +LED_D3.0mm_Horizontal_O3.81mm_Z2.0mm +LED, diameter 3.0mm z-position of LED center 2.0mm, 2 pins, diameter 3.0mm z-position of LED center 2.0mm, 2 pins +LED diameter 3.0mm z-position of LED center 2.0mm 2 pins diameter 3.0mm z-position of LED center 2.0mm 2 pins +0 +2 +2 +LED_THT +LED_D3.0mm_Horizontal_O3.81mm_Z6.0mm +LED, diameter 3.0mm z-position of LED center 2.0mm, 2 pins, diameter 3.0mm z-position of LED center 2.0mm, 2 pins, diameter 3.0mm z-position of LED center 2.0mm, 2 pins, diameter 3.0mm z-position of LED center 6.0mm, 2 pins, diameter 3.0mm z-position of LED center 6.0mm, 2 pins +LED diameter 3.0mm z-position of LED center 2.0mm 2 pins diameter 3.0mm z-position of LED center 2.0mm 2 pins diameter 3.0mm z-position of LED center 2.0mm 2 pins diameter 3.0mm z-position of LED center 6.0mm 2 pins diameter 3.0mm z-position of LED center 6.0mm 2 pins +0 +2 +2 +LED_THT +LED_D3.0mm_Horizontal_O3.81mm_Z10.0mm +LED, diameter 3.0mm z-position of LED center 2.0mm, 2 pins, diameter 3.0mm z-position of LED center 2.0mm, 2 pins, diameter 3.0mm z-position of LED center 2.0mm, 2 pins, diameter 3.0mm z-position of LED center 6.0mm, 2 pins, diameter 3.0mm z-position of LED center 6.0mm, 2 pins, diameter 3.0mm z-position of LED center 6.0mm, 2 pins, diameter 3.0mm z-position of LED center 10.0mm, 2 pins, diameter 3.0mm z-position of LED center 10.0mm, 2 pins +LED diameter 3.0mm z-position of LED center 2.0mm 2 pins diameter 3.0mm z-position of LED center 2.0mm 2 pins diameter 3.0mm z-position of LED center 2.0mm 2 pins diameter 3.0mm z-position of LED center 6.0mm 2 pins diameter 3.0mm z-position of LED center 6.0mm 2 pins diameter 3.0mm z-position of LED center 6.0mm 2 pins diameter 3.0mm z-position of LED center 10.0mm 2 pins diameter 3.0mm z-position of LED center 10.0mm 2 pins +0 +2 +2 +LED_THT +LED_D3.0mm_Horizontal_O6.35mm_Z2.0mm +LED, diameter 3.0mm z-position of LED center 2.0mm, 2 pins, diameter 3.0mm z-position of LED center 2.0mm, 2 pins, diameter 3.0mm z-position of LED center 2.0mm, 2 pins +LED diameter 3.0mm z-position of LED center 2.0mm 2 pins diameter 3.0mm z-position of LED center 2.0mm 2 pins diameter 3.0mm z-position of LED center 2.0mm 2 pins +0 +2 +2 +LED_THT +LED_D3.0mm_Horizontal_O6.35mm_Z6.0mm +LED, diameter 3.0mm z-position of LED center 2.0mm, 2 pins, diameter 3.0mm z-position of LED center 2.0mm, 2 pins, diameter 3.0mm z-position of LED center 2.0mm, 2 pins, diameter 3.0mm z-position of LED center 6.0mm, 2 pins, diameter 3.0mm z-position of LED center 6.0mm, 2 pins, diameter 3.0mm z-position of LED center 6.0mm, 2 pins +LED diameter 3.0mm z-position of LED center 2.0mm 2 pins diameter 3.0mm z-position of LED center 2.0mm 2 pins diameter 3.0mm z-position of LED center 2.0mm 2 pins diameter 3.0mm z-position of LED center 6.0mm 2 pins diameter 3.0mm z-position of LED center 6.0mm 2 pins diameter 3.0mm z-position of LED center 6.0mm 2 pins +0 +2 +2 +LED_THT +LED_D3.0mm_Horizontal_O6.35mm_Z10.0mm +LED, diameter 3.0mm z-position of LED center 2.0mm, 2 pins, diameter 3.0mm z-position of LED center 2.0mm, 2 pins, diameter 3.0mm z-position of LED center 2.0mm, 2 pins, diameter 3.0mm z-position of LED center 6.0mm, 2 pins, diameter 3.0mm z-position of LED center 6.0mm, 2 pins, diameter 3.0mm z-position of LED center 6.0mm, 2 pins, diameter 3.0mm z-position of LED center 10.0mm, 2 pins, diameter 3.0mm z-position of LED center 10.0mm, 2 pins, diameter 3.0mm z-position of LED center 10.0mm, 2 pins +LED diameter 3.0mm z-position of LED center 2.0mm 2 pins diameter 3.0mm z-position of LED center 2.0mm 2 pins diameter 3.0mm z-position of LED center 2.0mm 2 pins diameter 3.0mm z-position of LED center 6.0mm 2 pins diameter 3.0mm z-position of LED center 6.0mm 2 pins diameter 3.0mm z-position of LED center 6.0mm 2 pins diameter 3.0mm z-position of LED center 10.0mm 2 pins diameter 3.0mm z-position of LED center 10.0mm 2 pins diameter 3.0mm z-position of LED center 10.0mm 2 pins +0 +2 +2 +LED_THT +LED_D3.0mm_IRBlack +IR-ED, diameter 3.0mm, 2 pins, color: black +IR infrared LED diameter 3.0mm 2 pins black +0 +2 +2 +LED_THT +LED_D3.0mm_IRGrey +IR-LED, diameter 3.0mm, 2 pins, color: grey +IR infrared LED diameter 3.0mm 2 pins grey +0 +2 +2 +LED_THT +LED_D4.0mm +LED, diameter 4.0mm, 2 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-43GD(Ver.12B).pdf +LED diameter 4.0mm 2 pins +0 +2 +2 +LED_THT +LED_D5.0mm +LED, diameter 5.0mm, 2 pins, http://cdn-reichelt.de/documents/datenblatt/A500/LL-504BC2E-009.pdf +LED diameter 5.0mm 2 pins +0 +2 +2 +LED_THT +LED_D5.0mm-3 +LED, diameter 5.0mm, 2 pins, diameter 5.0mm, 3 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-59EGC(Ver.17A).pdf +LED diameter 5.0mm 2 pins diameter 5.0mm 3 pins +0 +3 +3 +LED_THT +LED_D5.0mm-3_Horizontal_O3.81mm_Z3.0mm +LED, diameter 5.0mm z-position of LED center 3.0mm, 3 pins, diameter 5.0mm z-position of LED center 3.0mm, 2 pins +LED diameter 5.0mm z-position of LED center 3.0mm 3 pins diameter 5.0mm z-position of LED center 3.0mm 2 pins +0 +3 +3 +LED_THT +LED_D5.0mm-4_RGB +LED, diameter 5.0mm, 4 pins, WP154A4, https://www.kingbright.com/attachments/file/psearch/000/00/00/L-154A4SUREQBFZGEW(Ver.11A).pdf +LED diameter 5.0mm 2 pins diameter 5.0mm 3 pins diameter 5.0mm 4 pins RGB RGBLED +0 +4 +4 +LED_THT +LED_D5.0mm-4_RGB_Staggered_Pins +LED, diameter 5.0mm, 4 pins, WP154A4, https://www.kingbright.com/attachments/file/psearch/000/00/00/L-154A4SUREQBFZGEW(Ver.11A).pdf +rgb led +0 +4 +4 +LED_THT +LED_D5.0mm-4_RGB_Wide_Pins +LED, diameter 5.0mm, 4 pins, WP154A4, https://www.kingbright.com/attachments/file/psearch/000/00/00/L-154A4SUREQBFZGEW(Ver.11A).pdf +LED diameter 5.0mm 2 pins diameter 5.0mm 3 pins diameter 5.0mm 4 pins RGB RGBLED +0 +4 +4 +LED_THT +LED_D5.0mm_Clear +LED, diameter 5.0mm, 2 pins, http://cdn-reichelt.de/documents/datenblatt/A500/LL-504BC2E-009.pdf +LED diameter 5.0mm 2 pins +0 +2 +2 +LED_THT +LED_D5.0mm_FlatTop +LED, Round, FlatTop, diameter 5.0mm, 2 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-483GDT(Ver.15B).pdf +LED Round FlatTop diameter 5.0mm 2 pins +0 +2 +2 +LED_THT +LED_D5.0mm_Horizontal_O1.27mm_Z3.0mm +LED, diameter 5.0mm z-position of LED center 3.0mm, 2 pins +LED diameter 5.0mm z-position of LED center 3.0mm 2 pins +0 +2 +2 +LED_THT +LED_D5.0mm_Horizontal_O1.27mm_Z3.0mm_Clear +LED, diameter 5.0mm z-position of LED center 3.0mm, 2 pins +LED diameter 5.0mm z-position of LED center 3.0mm 2 pins +0 +2 +2 +LED_THT +LED_D5.0mm_Horizontal_O1.27mm_Z3.0mm_IRBlack +LED, diameter 5.0mm z-position of LED center 3.0mm, 2 pins +LED diameter 5.0mm z-position of LED center 3.0mm 2 pins +0 +2 +2 +LED_THT +LED_D5.0mm_Horizontal_O1.27mm_Z3.0mm_IRGrey +LED, diameter 5.0mm z-position of LED center 3.0mm, 2 pins +LED diameter 5.0mm z-position of LED center 3.0mm 2 pins +0 +2 +2 +LED_THT +LED_D5.0mm_Horizontal_O1.27mm_Z9.0mm +LED, diameter 5.0mm z-position of LED center 3.0mm, 2 pins, diameter 5.0mm z-position of LED center 3.0mm, 2 pins, diameter 5.0mm z-position of LED center 3.0mm, 2 pins, diameter 5.0mm z-position of LED center 9.0mm, 2 pins +LED diameter 5.0mm z-position of LED center 3.0mm 2 pins diameter 5.0mm z-position of LED center 3.0mm 2 pins diameter 5.0mm z-position of LED center 3.0mm 2 pins diameter 5.0mm z-position of LED center 9.0mm 2 pins +0 +2 +2 +LED_THT +LED_D5.0mm_Horizontal_O1.27mm_Z15.0mm +LED, diameter 5.0mm z-position of LED center 3.0mm, 2 pins, diameter 5.0mm z-position of LED center 3.0mm, 2 pins, diameter 5.0mm z-position of LED center 3.0mm, 2 pins, diameter 5.0mm z-position of LED center 9.0mm, 2 pins, diameter 5.0mm z-position of LED center 9.0mm, 2 pins, diameter 5.0mm z-position of LED center 9.0mm, 2 pins, diameter 5.0mm z-position of LED center 15.0mm, 2 pins +LED diameter 5.0mm z-position of LED center 3.0mm 2 pins diameter 5.0mm z-position of LED center 3.0mm 2 pins diameter 5.0mm z-position of LED center 3.0mm 2 pins diameter 5.0mm z-position of LED center 9.0mm 2 pins diameter 5.0mm z-position of LED center 9.0mm 2 pins diameter 5.0mm z-position of LED center 9.0mm 2 pins diameter 5.0mm z-position of LED center 15.0mm 2 pins +0 +2 +2 +LED_THT +LED_D5.0mm_Horizontal_O3.81mm_Z3.0mm +LED, diameter 5.0mm z-position of LED center 3.0mm, 2 pins, diameter 5.0mm z-position of LED center 3.0mm, 2 pins +LED diameter 5.0mm z-position of LED center 3.0mm 2 pins diameter 5.0mm z-position of LED center 3.0mm 2 pins +0 +2 +2 +LED_THT +LED_D5.0mm_Horizontal_O3.81mm_Z9.0mm +LED, diameter 5.0mm z-position of LED center 3.0mm, 2 pins, diameter 5.0mm z-position of LED center 3.0mm, 2 pins, diameter 5.0mm z-position of LED center 3.0mm, 2 pins, diameter 5.0mm z-position of LED center 9.0mm, 2 pins, diameter 5.0mm z-position of LED center 9.0mm, 2 pins +LED diameter 5.0mm z-position of LED center 3.0mm 2 pins diameter 5.0mm z-position of LED center 3.0mm 2 pins diameter 5.0mm z-position of LED center 3.0mm 2 pins diameter 5.0mm z-position of LED center 9.0mm 2 pins diameter 5.0mm z-position of LED center 9.0mm 2 pins +0 +2 +2 +LED_THT +LED_D5.0mm_Horizontal_O3.81mm_Z15.0mm +LED, diameter 5.0mm z-position of LED center 3.0mm, 2 pins, diameter 5.0mm z-position of LED center 3.0mm, 2 pins, diameter 5.0mm z-position of LED center 3.0mm, 2 pins, diameter 5.0mm z-position of LED center 9.0mm, 2 pins, diameter 5.0mm z-position of LED center 9.0mm, 2 pins, diameter 5.0mm z-position of LED center 9.0mm, 2 pins, diameter 5.0mm z-position of LED center 15.0mm, 2 pins, diameter 5.0mm z-position of LED center 15.0mm, 2 pins +LED diameter 5.0mm z-position of LED center 3.0mm 2 pins diameter 5.0mm z-position of LED center 3.0mm 2 pins diameter 5.0mm z-position of LED center 3.0mm 2 pins diameter 5.0mm z-position of LED center 9.0mm 2 pins diameter 5.0mm z-position of LED center 9.0mm 2 pins diameter 5.0mm z-position of LED center 9.0mm 2 pins diameter 5.0mm z-position of LED center 15.0mm 2 pins diameter 5.0mm z-position of LED center 15.0mm 2 pins +0 +2 +2 +LED_THT +LED_D5.0mm_Horizontal_O6.35mm_Z3.0mm +LED, diameter 5.0mm z-position of LED center 3.0mm, 2 pins, diameter 5.0mm z-position of LED center 3.0mm, 2 pins, diameter 5.0mm z-position of LED center 3.0mm, 2 pins +LED diameter 5.0mm z-position of LED center 3.0mm 2 pins diameter 5.0mm z-position of LED center 3.0mm 2 pins diameter 5.0mm z-position of LED center 3.0mm 2 pins +0 +2 +2 +LED_THT +LED_D5.0mm_Horizontal_O6.35mm_Z9.0mm +LED, diameter 5.0mm z-position of LED center 3.0mm, 2 pins, diameter 5.0mm z-position of LED center 3.0mm, 2 pins, diameter 5.0mm z-position of LED center 3.0mm, 2 pins, diameter 5.0mm z-position of LED center 9.0mm, 2 pins, diameter 5.0mm z-position of LED center 9.0mm, 2 pins, diameter 5.0mm z-position of LED center 9.0mm, 2 pins +LED diameter 5.0mm z-position of LED center 3.0mm 2 pins diameter 5.0mm z-position of LED center 3.0mm 2 pins diameter 5.0mm z-position of LED center 3.0mm 2 pins diameter 5.0mm z-position of LED center 9.0mm 2 pins diameter 5.0mm z-position of LED center 9.0mm 2 pins diameter 5.0mm z-position of LED center 9.0mm 2 pins +0 +2 +2 +LED_THT +LED_D5.0mm_Horizontal_O6.35mm_Z15.0mm +LED, diameter 5.0mm z-position of LED center 3.0mm, 2 pins, diameter 5.0mm z-position of LED center 3.0mm, 2 pins, diameter 5.0mm z-position of LED center 3.0mm, 2 pins, diameter 5.0mm z-position of LED center 9.0mm, 2 pins, diameter 5.0mm z-position of LED center 9.0mm, 2 pins, diameter 5.0mm z-position of LED center 9.0mm, 2 pins, diameter 5.0mm z-position of LED center 15.0mm, 2 pins, diameter 5.0mm z-position of LED center 15.0mm, 2 pins, diameter 5.0mm z-position of LED center 15.0mm, 2 pins +LED diameter 5.0mm z-position of LED center 3.0mm 2 pins diameter 5.0mm z-position of LED center 3.0mm 2 pins diameter 5.0mm z-position of LED center 3.0mm 2 pins diameter 5.0mm z-position of LED center 9.0mm 2 pins diameter 5.0mm z-position of LED center 9.0mm 2 pins diameter 5.0mm z-position of LED center 9.0mm 2 pins diameter 5.0mm z-position of LED center 15.0mm 2 pins diameter 5.0mm z-position of LED center 15.0mm 2 pins diameter 5.0mm z-position of LED center 15.0mm 2 pins +0 +2 +2 +LED_THT +LED_D5.0mm_IRBlack +LED, diameter 5.0mm, 2 pins, http://cdn-reichelt.de/documents/datenblatt/A500/LL-504BC2E-009.pdf +LED diameter 5.0mm 2 pins +0 +2 +2 +LED_THT +LED_D5.0mm_IRGrey +LED, diameter 5.0mm, 2 pins, http://cdn-reichelt.de/documents/datenblatt/A500/LL-504BC2E-009.pdf +LED diameter 5.0mm 2 pins +0 +2 +2 +LED_THT +LED_D8.0mm +LED, diameter 8.0mm, 2 pins, http://cdn-reichelt.de/documents/datenblatt/A500/LED8MMGE_LED8MMGN_LED8MMRT%23KIN.pdf +LED diameter 8.0mm 2 pins +0 +2 +2 +LED_THT +LED_D8.0mm-3 +LED, diameter 8.0mm, 2 pins, diameter 8.0mm, 3 pins +LED diameter 8.0mm 2 pins diameter 8.0mm 3 pins +0 +3 +3 +LED_THT +LED_D10.0mm +LED, diameter 10.0mm, 2 pins, http://cdn-reichelt.de/documents/datenblatt/A500/LED10-4500RT%23KIN.pdf +LED diameter 10.0mm 2 pins +0 +2 +2 +LED_THT +LED_D10.0mm-3 +LED, diameter 10.0mm, 2 pins, diameter 10.0mm, 3 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-819EGW(Ver.14A).pdf +LED diameter 10.0mm 2 pins diameter 10.0mm 3 pins +0 +3 +3 +LED_THT +LED_D20.0mm +LED, diameter 20.0mm, 2 pins, http://cdn-reichelt.de/documents/datenblatt/A500/DLC2-6GD%28V6%29.pdf +LED diameter 20.0mm 2 pins +0 +2 +2 +LED_THT +LED_Oval_W5.2mm_H3.8mm +LED_Oval, Oval, Oval size 5.2x3.8mm^2, 2 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-5603QBC-D(Ver.12B).pdf +LED_Oval Oval Oval size 5.2x3.8mm^2 2 pins +0 +2 +2 +LED_THT +LED_Rectangular_W3.0mm_H2.0mm +LED_Rectangular, Rectangular, Rectangular size 3.0x2.0mm^2, 2 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-169XCGDK(Ver.9B).pdf +LED_Rectangular Rectangular Rectangular size 3.0x2.0mm^2 2 pins +0 +2 +2 +LED_THT +LED_Rectangular_W3.9mm_H1.8mm +LED_Rectangular, Rectangular, Rectangular size 3.9x1.8mm^2, 2 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-2774GD(Ver.7B).pdf +LED_Rectangular Rectangular Rectangular size 3.9x1.8mm^2 2 pins +0 +2 +2 +LED_THT +LED_Rectangular_W3.9mm_H1.8mm_FlatTop +LED_Rectangular, Rectangular, Rectangular size 3.9x1.8mm^2, 2 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-2774GD(Ver.7B).pdf +LED_Rectangular Rectangular Rectangular size 3.9x1.8mm^2 2 pins +0 +2 +2 +LED_THT +LED_Rectangular_W3.9mm_H1.9mm +LED_Rectangular, Rectangular, Rectangular size 3.9x1.9mm^2, 2 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-144GDT(Ver.14B).pdf +LED_Rectangular Rectangular Rectangular size 3.9x1.9mm^2 2 pins +0 +2 +2 +LED_THT +LED_Rectangular_W5.0mm_H2.0mm +LED_Rectangular, Rectangular, Rectangular size 5.0x2.0mm^2, 2 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-169XCGDK(Ver.9B).pdf +LED_Rectangular Rectangular Rectangular size 5.0x2.0mm^2 2 pins +0 +2 +2 +LED_THT +LED_Rectangular_W5.0mm_H2.0mm-3Pins +LED_Rectangular, Rectangular, Rectangular size 5.0x2.0mm^2, 3 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-169XCGDK(Ver.9B).pdf +LED_Rectangular Rectangular Rectangular size 5.0x2.0mm^2 3 pins +0 +3 +3 +LED_THT +LED_Rectangular_W5.0mm_H2.0mm_Horizontal_O1.27mm_Z1.0mm +LED_Rectangular, Rectangular, Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm, 2 pins +LED_Rectangular Rectangular Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm 2 pins +0 +2 +2 +LED_THT +LED_Rectangular_W5.0mm_H2.0mm_Horizontal_O1.27mm_Z3.0mm +LED_Rectangular, Rectangular, Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm, 2 pins, Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm, 2 pins, Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm, 2 pins, Rectangular size 5.0x2.0mm^2 z-position of LED center 3.0mm, 2 pins +LED_Rectangular Rectangular Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm 2 pins Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm 2 pins Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm 2 pins Rectangular size 5.0x2.0mm^2 z-position of LED center 3.0mm 2 pins +0 +2 +2 +LED_THT +LED_Rectangular_W5.0mm_H2.0mm_Horizontal_O1.27mm_Z5.0mm +LED_Rectangular, Rectangular, Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm, 2 pins, Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm, 2 pins, Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm, 2 pins, Rectangular size 5.0x2.0mm^2 z-position of LED center 3.0mm, 2 pins, Rectangular size 5.0x2.0mm^2 z-position of LED center 3.0mm, 2 pins, Rectangular size 5.0x2.0mm^2 z-position of LED center 3.0mm, 2 pins, Rectangular size 5.0x2.0mm^2 z-position of LED center 5.0mm, 2 pins +LED_Rectangular Rectangular Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm 2 pins Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm 2 pins Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm 2 pins Rectangular size 5.0x2.0mm^2 z-position of LED center 3.0mm 2 pins Rectangular size 5.0x2.0mm^2 z-position of LED center 3.0mm 2 pins Rectangular size 5.0x2.0mm^2 z-position of LED center 3.0mm 2 pins Rectangular size 5.0x2.0mm^2 z-position of LED center 5.0mm 2 pins +0 +2 +2 +LED_THT +LED_Rectangular_W5.0mm_H2.0mm_Horizontal_O3.81mm_Z1.0mm +LED_Rectangular, Rectangular, Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm, 2 pins, Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm, 2 pins +LED_Rectangular Rectangular Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm 2 pins Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm 2 pins +0 +2 +2 +LED_THT +LED_Rectangular_W5.0mm_H2.0mm_Horizontal_O3.81mm_Z3.0mm +LED_Rectangular, Rectangular, Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm, 2 pins, Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm, 2 pins, Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm, 2 pins, Rectangular size 5.0x2.0mm^2 z-position of LED center 3.0mm, 2 pins, Rectangular size 5.0x2.0mm^2 z-position of LED center 3.0mm, 2 pins +LED_Rectangular Rectangular Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm 2 pins Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm 2 pins Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm 2 pins Rectangular size 5.0x2.0mm^2 z-position of LED center 3.0mm 2 pins Rectangular size 5.0x2.0mm^2 z-position of LED center 3.0mm 2 pins +0 +2 +2 +LED_THT +LED_Rectangular_W5.0mm_H2.0mm_Horizontal_O3.81mm_Z5.0mm +LED_Rectangular, Rectangular, Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm, 2 pins, Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm, 2 pins, Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm, 2 pins, Rectangular size 5.0x2.0mm^2 z-position of LED center 3.0mm, 2 pins, Rectangular size 5.0x2.0mm^2 z-position of LED center 3.0mm, 2 pins, Rectangular size 5.0x2.0mm^2 z-position of LED center 3.0mm, 2 pins, Rectangular size 5.0x2.0mm^2 z-position of LED center 5.0mm, 2 pins, Rectangular size 5.0x2.0mm^2 z-position of LED center 5.0mm, 2 pins +LED_Rectangular Rectangular Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm 2 pins Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm 2 pins Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm 2 pins Rectangular size 5.0x2.0mm^2 z-position of LED center 3.0mm 2 pins Rectangular size 5.0x2.0mm^2 z-position of LED center 3.0mm 2 pins Rectangular size 5.0x2.0mm^2 z-position of LED center 3.0mm 2 pins Rectangular size 5.0x2.0mm^2 z-position of LED center 5.0mm 2 pins Rectangular size 5.0x2.0mm^2 z-position of LED center 5.0mm 2 pins +0 +2 +2 +LED_THT +LED_Rectangular_W5.0mm_H2.0mm_Horizontal_O6.35mm_Z1.0mm +LED_Rectangular, Rectangular, Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm, 2 pins, Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm, 2 pins, Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm, 2 pins +LED_Rectangular Rectangular Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm 2 pins Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm 2 pins Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm 2 pins +0 +2 +2 +LED_THT +LED_Rectangular_W5.0mm_H2.0mm_Horizontal_O6.35mm_Z3.0mm +LED_Rectangular, Rectangular, Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm, 2 pins, Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm, 2 pins, Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm, 2 pins, Rectangular size 5.0x2.0mm^2 z-position of LED center 3.0mm, 2 pins, Rectangular size 5.0x2.0mm^2 z-position of LED center 3.0mm, 2 pins, Rectangular size 5.0x2.0mm^2 z-position of LED center 3.0mm, 2 pins +LED_Rectangular Rectangular Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm 2 pins Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm 2 pins Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm 2 pins Rectangular size 5.0x2.0mm^2 z-position of LED center 3.0mm 2 pins Rectangular size 5.0x2.0mm^2 z-position of LED center 3.0mm 2 pins Rectangular size 5.0x2.0mm^2 z-position of LED center 3.0mm 2 pins +0 +2 +2 +LED_THT +LED_Rectangular_W5.0mm_H2.0mm_Horizontal_O6.35mm_Z5.0mm +LED_Rectangular, Rectangular, Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm, 2 pins, Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm, 2 pins, Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm, 2 pins, Rectangular size 5.0x2.0mm^2 z-position of LED center 3.0mm, 2 pins, Rectangular size 5.0x2.0mm^2 z-position of LED center 3.0mm, 2 pins, Rectangular size 5.0x2.0mm^2 z-position of LED center 3.0mm, 2 pins, Rectangular size 5.0x2.0mm^2 z-position of LED center 5.0mm, 2 pins, Rectangular size 5.0x2.0mm^2 z-position of LED center 5.0mm, 2 pins, Rectangular size 5.0x2.0mm^2 z-position of LED center 5.0mm, 2 pins +LED_Rectangular Rectangular Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm 2 pins Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm 2 pins Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm 2 pins Rectangular size 5.0x2.0mm^2 z-position of LED center 3.0mm 2 pins Rectangular size 5.0x2.0mm^2 z-position of LED center 3.0mm 2 pins Rectangular size 5.0x2.0mm^2 z-position of LED center 3.0mm 2 pins Rectangular size 5.0x2.0mm^2 z-position of LED center 5.0mm 2 pins Rectangular size 5.0x2.0mm^2 z-position of LED center 5.0mm 2 pins Rectangular size 5.0x2.0mm^2 z-position of LED center 5.0mm 2 pins +0 +2 +2 +LED_THT +LED_Rectangular_W5.0mm_H5.0mm +LED_Rectangular, Rectangular, Rectangular size 5.0x5.0mm^2, 2 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-169XCGDK(Ver.9B).pdf +LED_Rectangular Rectangular Rectangular size 5.0x5.0mm^2 2 pins +0 +2 +2 +LED_THT +LED_Rectangular_W7.62mm_H4.55mm_P5.08mm_R3 +Datasheet can be found at https://www.gme.cz/data/attachments/dsh.511-795.1.pdf +LED automotive super flux 7.62mm +0 +4 +2 +LED_THT +LED_SideEmitter_Rectangular_W4.5mm_H1.6mm +LED_SideEmitter_Rectangular, Rectangular, SideEmitter, Rectangular size 4.5x1.6mm^2, 2 pins, http://cdn-reichelt.de/documents/datenblatt/A500/LED15MMGE_LED15MMGN%23KIN.pdf +LED_SideEmitter_Rectangular Rectangular SideEmitter Rectangular size 4.5x1.6mm^2 2 pins +0 +2 +2 +LED_THT +LED_VCCLite_5381H1_6.35x6.35mm +Red 5381 Series LED VCCLite https://vcclite.com/wp-content/uploads/wpallimport/files/files/5381Series.pdf http://static.vcclite.com/pdf/Mounting%20Hole%20Pattern%202.pdf +Red 5381 Series LED +0 +2 +2 +LED_THT +LED_VCCLite_5381H3_6.35x6.35mm +Amber 5381 Series LED VCCLite https://vcclite.com/wp-content/uploads/wpallimport/files/files/5381Series.pdf http://static.vcclite.com/pdf/Mounting%20Hole%20Pattern%202.pdf +Amber 5381 Series LED +0 +2 +2 +LED_THT +LED_VCCLite_5381H5_6.35x6.35mm +Green 5381 Series LED VCCLite https://vcclite.com/wp-content/uploads/wpallimport/files/files/5381Series.pdf http://static.vcclite.com/pdf/Mounting%20Hole%20Pattern%202.pdf +Green 5381 Series LED +0 +2 +2 +LED_THT +LED_VCCLite_5381H7_6.35x6.35mm +Yellow 5381 Series LED VCCLite https://vcclite.com/wp-content/uploads/wpallimport/files/files/5381Series.pdf http://static.vcclite.com/pdf/Mounting%20Hole%20Pattern%202.pdf +Yellow 5381 Series LED +0 +2 +2 +Module +A20_OLINUXINO_LIME2 +A20 Olinuxino LIME2, 1.2GHz, 512-1024MB RAM, Micro-SD, NAND or eMMC, 1000Mbit Ethernet +A20 Olimex Olinuxino LIME2 development board +0 +180 +180 +Module +Adafruit_Feather +Common footprint for the Adafruit Feather series of boards, https://learn.adafruit.com/adafruit-feather/feather-specification +Adafruit Feather +0 +28 +28 +Module +Adafruit_Feather_32u4_FONA +Footprint for the Adafruit Feather 32u4 FONA board, https://learn.adafruit.com/adafruit-feather-32u4-fona +Adafruit Feather 32u4 FONA +0 +28 +28 +Module +Adafruit_Feather_32u4_FONA_WithMountingHoles +Footprint for the Adafruit Feather 32u4 FONA board, https://learn.adafruit.com/adafruit-feather-32u4-fona +Adafruit Feather 32u4 FONA +0 +28 +28 +Module +Adafruit_Feather_32u4_RFM +Footprint for the Adafruit Feather 32u4 RFM series of boards, https://learn.adafruit.com/adafruit-feather-32u4-radio-with-rfm69hcw-module +Adafruit Feather 32u4 RFM +0 +31 +31 +Module +Adafruit_Feather_32u4_RFM_WithMountingHoles +Footprint for the Adafruit Feather 32u4 RFM series of boards, https://learn.adafruit.com/adafruit-feather-32u4-radio-with-rfm69hcw-module +Adafruit Feather 32u4 RFM +0 +31 +31 +Module +Adafruit_Feather_M0_RFM +Footprint for the Adafruit Feather M0 RFM series of boards, e.g. https://learn.adafruit.com/adafruit-feather-m0-radio-with-rfm69-packet-radio +Adafruit Feather M0 RFM +0 +32 +32 +Module +Adafruit_Feather_M0_RFM_WithMountingHoles +Footprint for the Adafruit Feather M0 RFM series of boards, e.g. https://learn.adafruit.com/adafruit-feather-m0-radio-with-rfm69-packet-radio + Adafruit Feather M0 RFM +0 +32 +32 +Module +Adafruit_Feather_M0_Wifi +Footprint for the Adafruit Feather M0 Wifi board, https://learn.adafruit.com/adafruit-feather-m0-wifi-atwinc1500/ +Adafruit Feather M0 Wifi +0 +28 +28 +Module +Adafruit_Feather_M0_Wifi_WithMountingHoles +Footprint for the Adafruit Feather M0 Wifi board, https://learn.adafruit.com/adafruit-feather-m0-wifi-atwinc1500/ +Adafruit Feather M0 Wifi +0 +28 +28 +Module +Adafruit_Feather_WICED +Footprint for the Adafruit Feather WICED Wifi board, https://learn.adafruit.com/introducing-the-adafruit-wiced-feather-wifi +Adafruit Feather WICED Wifi +0 +29 +29 +Module +Adafruit_Feather_WICED_WithMountingHoles +Footprint for the Adafruit Feather WICED Wifi board, https://learn.adafruit.com/introducing-the-adafruit-wiced-feather-wifi +Adafruit Feather WICED Wifi +0 +29 +29 +Module +Adafruit_Feather_WithMountingHoles +Common footprint for the Adafruit Feather series of boards, https://learn.adafruit.com/adafruit-feather/feather-specification +Adafruit Feather +0 +28 +28 +Module +Adafruit_HUZZAH_ESP8266_breakout +32-bit microcontroller module with WiFi, https://www.adafruit.com/product/2471 +ESP8266 WiFi microcontroller +0 +20 +20 +Module +Adafruit_HUZZAH_ESP8266_breakout_WithMountingHoles +32-bit microcontroller module with WiFi, https://www.adafruit.com/product/2471 +ESP8266 WiFi microcontroller +0 +20 +20 +Module +Arduino_Nano +Arduino Nano, http://www.mouser.com/pdfdocs/Gravitech_Arduino_Nano3_0.pdf +Arduino Nano +0 +30 +30 +Module +Arduino_Nano_WithMountingHoles +Arduino Nano, http://www.mouser.com/pdfdocs/Gravitech_Arduino_Nano3_0.pdf +Arduino Nano +0 +30 +30 +Module +Arduino_UNO_R2 +Arduino UNO R2, http://www.mouser.com/pdfdocs/Gravitech_Arduino_Nano3_0.pdf +Arduino UNO R2 +0 +30 +30 +Module +Arduino_UNO_R2_WithMountingHoles +Arduino UNO R2, http://www.mouser.com/pdfdocs/Gravitech_Arduino_Nano3_0.pdf +Arduino UNO R2 +0 +30 +30 +Module +Arduino_UNO_R3 +Arduino UNO R3, http://www.mouser.com/pdfdocs/Gravitech_Arduino_Nano3_0.pdf +Arduino UNO R3 +0 +32 +32 +Module +Arduino_UNO_R3_WithMountingHoles +Arduino UNO R3, http://www.mouser.com/pdfdocs/Gravitech_Arduino_Nano3_0.pdf +Arduino UNO R3 +0 +32 +32 +Module +BeagleBoard_PocketBeagle +PocketBeagle, https://github.com/beagleboard/pocketbeagle/wiki/System-Reference-Manual#71_Expansion_Header_Connectors +PocketBeagle +0 +72 +72 +Module +Carambola2 +8devices Carambola2, OpenWRT, industrial SoM computer, https://www.8devices.com/media/products/carambola2/downloads/carambola2-datasheet.pdf +carambola2 8devices +0 +104 +52 +Module +Electrosmith_Daisy_Seed +Embedded platform for audio applications. 96kHz / 24-bit audio hardware. 64MB of SDRAM for up to 10 minute long audio. ARM Cortex-M7 MCU, running at 480MHz. 31 total GPIO pins with configurable functionality. 12-bit Digital to Analog Converters (x2). SD card interfaces. PWM outputs. Serial Protocols for connecting external sensors and devices (SPI, UART, I2S, I2C). Dedicated VIN pin for power. Micro USB port, and additional USB pins for full OTG-support as host and device. https://static1.squarespace.com/static/58d03fdc1b10e3bf442567b8/t/6227e6236f02fb68d1577146/1646781988478/Daisy_Seed_datasheet_v1.0.3.pdf +Electrosmith Daisy Seed Microcontroller Module ARM Cortex-M7 Audio Codec +0 +40 +40 +Module +Maple_Mini +Maple Mini, http://docs.leaflabs.com/static.leaflabs.com/pub/leaflabs/maple-docs/0.0.12/hardware/maple-mini.html +Maple Mini +0 +40 +40 +Module +Olimex_MOD-WIFI-ESP8266-DEV +ESP8266 development board https://www.olimex.com/Products/IoT/ESP8266/MOD-WIFI-ESP8266-DEV/resources/dimensions-WIFI-ESP8266-DEV.png +ESP8266 +0 +22 +22 +Module +Onion_Omega2+ +https://onion.io/omega2/ +Omega Onion module +0 +32 +32 +Module +Onion_Omega2S +https://github.com/OnionIoT/Omega2/raw/master/Documents/Omega2S%20Datasheet.pdf +onion omega module +0 +89 +64 +Module +Pololu_Breakout-16_15.2x20.3mm +Pololu Breakout 16-pin 15.2x20.3mm 0.6x0.8\ +Pololu Breakout +0 +16 +16 +Module +Raspberry_Pi_Zero_Socketed_THT_FaceDown_MountingHoles +Raspberry Pi Zero using through hole straight pin socket, 2x20, 2.54mm pitch, https://www.raspberrypi.org/documentation/hardware/raspberrypi/mechanical/rpi_MECH_Zero_1p2.pdf +raspberry pi zero through hole +0 +40 +40 +Module +ST_Morpho_Connector_144_STLink +ST Morpho Connector 144 With STLink +ST Morpho Connector 144 STLink +0 +148 +148 +Module +ST_Morpho_Connector_144_STLink_MountingHoles +ST Morpho Connector 144 With STLink +ST Morpho Connector 144 STLink +0 +148 +148 +Module +Sipeed-M1 +AI accelerated MCU with optional wifi, https://dl.sipeed.com/MAIX/HDK/Sipeed-M1&M1W/Specifications +AI Kendryte K210 RISC-V +0 +85 +77 +Module +Texas_EUK_R-PDSS-T7_THT +Texas Instruments EUK 7 Pin Double Sided Module +module pcb +0 +7 +7 +Module +Texas_EUS_R-PDSS-T5_THT +Texas Instruments EUS 5 Pin Double Sided Module +module pcb +0 +5 +5 +Module +Texas_EUW_R-PDSS-T7_THT +Texas Instruments EUW 7 Pin Double Sided Module +module pcb +0 +7 +7 +Module +WEMOS_D1_mini_light +16-pin module, column spacing 22.86 mm (900 mils), https://wiki.wemos.cc/products:d1:d1_mini, https://c1.staticflickr.com/1/734/31400410271_f278b087db_z.jpg +ESP8266 WiFi microcontroller +0 +16 +16 +Motors +Vybronics_VZ30C1T8219732L +Vibration motor, 2.3-3.2V, 14000rpm, 0.7G, https://www.vybronics.com/wp-content/uploads/datasheet-files/Vybronics-VZ30C1T8219732L-datasheet.pdf +vibration motor Vybronics +0 +12 +3 +MountingEquipment +DINRailAdapter_3xM3_PhoenixContact_1201578 +https://www.phoenixcontact.com/online/portal/us?uri=pxc-oc-itemdetail:pid=1201578&library=usen&tab=1 +DIN rail adapter universal three M3 clearance holes +0 +0 +0 +MountingHole +MountingHole_2.1mm +Mounting Hole 2.1mm, no annular +mounting hole 2.1mm no annular +0 +0 +0 +MountingHole +MountingHole_2.2mm_M2 +Mounting Hole 2.2mm, no annular, M2 +mounting hole 2.2mm no annular m2 +0 +0 +0 +MountingHole +MountingHole_2.2mm_M2_DIN965 +Mounting Hole 2.2mm, no annular, M2, DIN965 +mounting hole 2.2mm no annular m2 din965 +0 +0 +0 +MountingHole +MountingHole_2.2mm_M2_DIN965_Pad +Mounting Hole 2.2mm, M2, DIN965 +mounting hole 2.2mm m2 din965 +0 +1 +1 +MountingHole +MountingHole_2.2mm_M2_DIN965_Pad_TopBottom +Mounting Hole 2.2mm, M2, DIN965 +mounting hole 2.2mm m2 din965 +0 +3 +1 +MountingHole +MountingHole_2.2mm_M2_DIN965_Pad_TopOnly +Mounting Hole 2.2mm, M2, DIN965 +mounting hole 2.2mm m2 din965 +0 +2 +1 +MountingHole +MountingHole_2.2mm_M2_ISO7380 +Mounting Hole 2.2mm, no annular, M2, ISO7380 +mounting hole 2.2mm no annular m2 iso7380 +0 +0 +0 +MountingHole +MountingHole_2.2mm_M2_ISO7380_Pad +Mounting Hole 2.2mm, M2, ISO7380 +mounting hole 2.2mm m2 iso7380 +0 +1 +1 +MountingHole +MountingHole_2.2mm_M2_ISO7380_Pad_TopBottom +Mounting Hole 2.2mm, M2, ISO7380 +mounting hole 2.2mm m2 iso7380 +0 +3 +1 +MountingHole +MountingHole_2.2mm_M2_ISO7380_Pad_TopOnly +Mounting Hole 2.2mm, M2, ISO7380 +mounting hole 2.2mm m2 iso7380 +0 +2 +1 +MountingHole +MountingHole_2.2mm_M2_ISO14580 +Mounting Hole 2.2mm, no annular, M2, ISO14580 +mounting hole 2.2mm no annular m2 iso14580 +0 +0 +0 +MountingHole +MountingHole_2.2mm_M2_ISO14580_Pad +Mounting Hole 2.2mm, M2, ISO14580 +mounting hole 2.2mm m2 iso14580 +0 +1 +1 +MountingHole +MountingHole_2.2mm_M2_ISO14580_Pad_TopBottom +Mounting Hole 2.2mm, M2, ISO14580 +mounting hole 2.2mm m2 iso14580 +0 +3 +1 +MountingHole +MountingHole_2.2mm_M2_ISO14580_Pad_TopOnly +Mounting Hole 2.2mm, M2, ISO14580 +mounting hole 2.2mm m2 iso14580 +0 +2 +1 +MountingHole +MountingHole_2.2mm_M2_Pad +Mounting Hole 2.2mm, M2 +mounting hole 2.2mm m2 +0 +1 +1 +MountingHole +MountingHole_2.2mm_M2_Pad_TopBottom +Mounting Hole 2.2mm, M2 +mounting hole 2.2mm m2 +0 +3 +1 +MountingHole +MountingHole_2.2mm_M2_Pad_TopOnly +Mounting Hole 2.2mm, M2 +mounting hole 2.2mm m2 +0 +2 +1 +MountingHole +MountingHole_2.2mm_M2_Pad_Via +Mounting Hole 2.2mm, M2 +mounting hole 2.2mm m2 +0 +9 +1 +MountingHole +MountingHole_2.5mm +Mounting Hole 2.5mm, no annular +mounting hole 2.5mm no annular +0 +0 +0 +MountingHole +MountingHole_2.5mm_Pad +Mounting Hole 2.5mm +mounting hole 2.5mm +0 +1 +1 +MountingHole +MountingHole_2.5mm_Pad_TopBottom +Mounting Hole 2.5mm +mounting hole 2.5mm +0 +3 +1 +MountingHole +MountingHole_2.5mm_Pad_TopOnly +Mounting Hole 2.5mm +mounting hole 2.5mm +0 +2 +1 +MountingHole +MountingHole_2.5mm_Pad_Via +Mounting Hole 2.5mm +mounting hole 2.5mm +0 +9 +1 +MountingHole +MountingHole_2.7mm +Mounting Hole 2.7mm, no annular +mounting hole 2.7mm no annular +0 +0 +0 +MountingHole +MountingHole_2.7mm_M2.5 +Mounting Hole 2.7mm, no annular, M2.5 +mounting hole 2.7mm no annular m2.5 +0 +0 +0 +MountingHole +MountingHole_2.7mm_M2.5_DIN965 +Mounting Hole 2.7mm, no annular, M2.5, DIN965 +mounting hole 2.7mm no annular m2.5 din965 +0 +0 +0 +MountingHole +MountingHole_2.7mm_M2.5_DIN965_Pad +Mounting Hole 2.7mm, M2.5, DIN965 +mounting hole 2.7mm m2.5 din965 +0 +1 +1 +MountingHole +MountingHole_2.7mm_M2.5_DIN965_Pad_TopBottom +Mounting Hole 2.7mm, M2.5, DIN965 +mounting hole 2.7mm m2.5 din965 +0 +3 +1 +MountingHole +MountingHole_2.7mm_M2.5_DIN965_Pad_TopOnly +Mounting Hole 2.7mm, M2.5, DIN965 +mounting hole 2.7mm m2.5 din965 +0 +2 +1 +MountingHole +MountingHole_2.7mm_M2.5_ISO7380 +Mounting Hole 2.7mm, no annular, M2.5, ISO7380 +mounting hole 2.7mm no annular m2.5 iso7380 +0 +0 +0 +MountingHole +MountingHole_2.7mm_M2.5_ISO7380_Pad +Mounting Hole 2.7mm, M2.5, ISO7380 +mounting hole 2.7mm m2.5 iso7380 +0 +1 +1 +MountingHole +MountingHole_2.7mm_M2.5_ISO7380_Pad_TopBottom +Mounting Hole 2.7mm, M2.5, ISO7380 +mounting hole 2.7mm m2.5 iso7380 +0 +3 +1 +MountingHole +MountingHole_2.7mm_M2.5_ISO7380_Pad_TopOnly +Mounting Hole 2.7mm, M2.5, ISO7380 +mounting hole 2.7mm m2.5 iso7380 +0 +2 +1 +MountingHole +MountingHole_2.7mm_M2.5_ISO14580 +Mounting Hole 2.7mm, no annular, M2.5, ISO14580 +mounting hole 2.7mm no annular m2.5 iso14580 +0 +0 +0 +MountingHole +MountingHole_2.7mm_M2.5_ISO14580_Pad +Mounting Hole 2.7mm, M2.5, ISO14580 +mounting hole 2.7mm m2.5 iso14580 +0 +1 +1 +MountingHole +MountingHole_2.7mm_M2.5_ISO14580_Pad_TopBottom +Mounting Hole 2.7mm, M2.5, ISO14580 +mounting hole 2.7mm m2.5 iso14580 +0 +3 +1 +MountingHole +MountingHole_2.7mm_M2.5_ISO14580_Pad_TopOnly +Mounting Hole 2.7mm, M2.5, ISO14580 +mounting hole 2.7mm m2.5 iso14580 +0 +2 +1 +MountingHole +MountingHole_2.7mm_M2.5_Pad +Mounting Hole 2.7mm, M2.5 +mounting hole 2.7mm m2.5 +0 +1 +1 +MountingHole +MountingHole_2.7mm_M2.5_Pad_TopBottom +Mounting Hole 2.7mm, M2.5 +mounting hole 2.7mm m2.5 +0 +3 +1 +MountingHole +MountingHole_2.7mm_M2.5_Pad_TopOnly +Mounting Hole 2.7mm, M2.5 +mounting hole 2.7mm m2.5 +0 +2 +1 +MountingHole +MountingHole_2.7mm_M2.5_Pad_Via +Mounting Hole 2.7mm +mounting hole 2.7mm +0 +9 +1 +MountingHole +MountingHole_2.7mm_Pad +Mounting Hole 2.7mm +mounting hole 2.7mm +0 +1 +1 +MountingHole +MountingHole_2.7mm_Pad_TopBottom +Mounting Hole 2.7mm +mounting hole 2.7mm +0 +3 +1 +MountingHole +MountingHole_2.7mm_Pad_TopOnly +Mounting Hole 2.7mm +mounting hole 2.7mm +0 +2 +1 +MountingHole +MountingHole_2.7mm_Pad_Via +Mounting Hole 2.7mm +mounting hole 2.7mm +0 +9 +1 +MountingHole +MountingHole_2mm +Mounting Hole 2mm, no annular +mounting hole 2mm no annular +0 +0 +0 +MountingHole +MountingHole_3.2mm_M3 +Mounting Hole 3.2mm, no annular, M3 +mounting hole 3.2mm no annular m3 +0 +0 +0 +MountingHole +MountingHole_3.2mm_M3_DIN965 +Mounting Hole 3.2mm, no annular, M3, DIN965 +mounting hole 3.2mm no annular m3 din965 +0 +0 +0 +MountingHole +MountingHole_3.2mm_M3_DIN965_Pad +Mounting Hole 3.2mm, M3, DIN965 +mounting hole 3.2mm m3 din965 +0 +1 +1 +MountingHole +MountingHole_3.2mm_M3_DIN965_Pad_TopBottom +Mounting Hole 3.2mm, M3, DIN965 +mounting hole 3.2mm m3 din965 +0 +3 +1 +MountingHole +MountingHole_3.2mm_M3_DIN965_Pad_TopOnly +Mounting Hole 3.2mm, M3, DIN965 +mounting hole 3.2mm m3 din965 +0 +2 +1 +MountingHole +MountingHole_3.2mm_M3_ISO7380 +Mounting Hole 3.2mm, no annular, M3, ISO7380 +mounting hole 3.2mm no annular m3 iso7380 +0 +0 +0 +MountingHole +MountingHole_3.2mm_M3_ISO7380_Pad +Mounting Hole 3.2mm, M3, ISO7380 +mounting hole 3.2mm m3 iso7380 +0 +1 +1 +MountingHole +MountingHole_3.2mm_M3_ISO7380_Pad_TopBottom +Mounting Hole 3.2mm, M3, ISO7380 +mounting hole 3.2mm m3 iso7380 +0 +3 +1 +MountingHole +MountingHole_3.2mm_M3_ISO7380_Pad_TopOnly +Mounting Hole 3.2mm, M3, ISO7380 +mounting hole 3.2mm m3 iso7380 +0 +2 +1 +MountingHole +MountingHole_3.2mm_M3_ISO14580 +Mounting Hole 3.2mm, no annular, M3, ISO14580 +mounting hole 3.2mm no annular m3 iso14580 +0 +0 +0 +MountingHole +MountingHole_3.2mm_M3_ISO14580_Pad +Mounting Hole 3.2mm, M3, ISO14580 +mounting hole 3.2mm m3 iso14580 +0 +1 +1 +MountingHole +MountingHole_3.2mm_M3_ISO14580_Pad_TopBottom +Mounting Hole 3.2mm, M3, ISO14580 +mounting hole 3.2mm m3 iso14580 +0 +3 +1 +MountingHole +MountingHole_3.2mm_M3_ISO14580_Pad_TopOnly +Mounting Hole 3.2mm, M3, ISO14580 +mounting hole 3.2mm m3 iso14580 +0 +2 +1 +MountingHole +MountingHole_3.2mm_M3_Pad +Mounting Hole 3.2mm, M3 +mounting hole 3.2mm m3 +0 +1 +1 +MountingHole +MountingHole_3.2mm_M3_Pad_TopBottom +Mounting Hole 3.2mm, M3 +mounting hole 3.2mm m3 +0 +3 +1 +MountingHole +MountingHole_3.2mm_M3_Pad_TopOnly +Mounting Hole 3.2mm, M3 +mounting hole 3.2mm m3 +0 +2 +1 +MountingHole +MountingHole_3.2mm_M3_Pad_Via +Mounting Hole 3.2mm, M3 +mounting hole 3.2mm m3 +0 +9 +1 +MountingHole +MountingHole_3.5mm +Mounting Hole 3.5mm, no annular +mounting hole 3.5mm no annular +0 +0 +0 +MountingHole +MountingHole_3.5mm_Pad +Mounting Hole 3.5mm +mounting hole 3.5mm +0 +1 +1 +MountingHole +MountingHole_3.5mm_Pad_TopBottom +Mounting Hole 3.5mm +mounting hole 3.5mm +0 +3 +1 +MountingHole +MountingHole_3.5mm_Pad_TopOnly +Mounting Hole 3.5mm +mounting hole 3.5mm +0 +2 +1 +MountingHole +MountingHole_3.5mm_Pad_Via +Mounting Hole 3.5mm +mounting hole 3.5mm +0 +9 +1 +MountingHole +MountingHole_3.7mm +Mounting Hole 3.7mm, no annular +mounting hole 3.7mm no annular +0 +0 +0 +MountingHole +MountingHole_3.7mm_Pad +Mounting Hole 3.7mm +mounting hole 3.7mm +0 +1 +1 +MountingHole +MountingHole_3.7mm_Pad_TopBottom +Mounting Hole 3.7mm +mounting hole 3.7mm +0 +3 +1 +MountingHole +MountingHole_3.7mm_Pad_TopOnly +Mounting Hole 3.7mm +mounting hole 3.7mm +0 +2 +1 +MountingHole +MountingHole_3.7mm_Pad_Via +Mounting Hole 3.7mm +mounting hole 3.7mm +0 +9 +1 +MountingHole +MountingHole_3mm +Mounting Hole 3mm, no annular +mounting hole 3mm no annular +0 +0 +0 +MountingHole +MountingHole_3mm_Pad +Mounting Hole 3mm +mounting hole 3mm +0 +1 +1 +MountingHole +MountingHole_3mm_Pad_TopBottom +Mounting Hole 3mm +mounting hole 3mm +0 +3 +1 +MountingHole +MountingHole_3mm_Pad_TopOnly +Mounting Hole 3mm +mounting hole 3mm +0 +2 +1 +MountingHole +MountingHole_3mm_Pad_Via +Mounting Hole 3mm +mounting hole 3mm +0 +9 +1 +MountingHole +MountingHole_4.3mm_M4 +Mounting Hole 4.3mm, no annular, M4 +mounting hole 4.3mm no annular m4 +0 +0 +0 +MountingHole +MountingHole_4.3mm_M4_DIN965 +Mounting Hole 4.3mm, no annular, M4, DIN965 +mounting hole 4.3mm no annular m4 din965 +0 +0 +0 +MountingHole +MountingHole_4.3mm_M4_DIN965_Pad +Mounting Hole 4.3mm, M4, DIN965 +mounting hole 4.3mm m4 din965 +0 +1 +1 +MountingHole +MountingHole_4.3mm_M4_DIN965_Pad_TopBottom +Mounting Hole 4.3mm, M4, DIN965 +mounting hole 4.3mm m4 din965 +0 +3 +1 +MountingHole +MountingHole_4.3mm_M4_DIN965_Pad_TopOnly +Mounting Hole 4.3mm, M4, DIN965 +mounting hole 4.3mm m4 din965 +0 +2 +1 +MountingHole +MountingHole_4.3mm_M4_ISO7380 +Mounting Hole 4.3mm, no annular, M4, ISO7380 +mounting hole 4.3mm no annular m4 iso7380 +0 +0 +0 +MountingHole +MountingHole_4.3mm_M4_ISO7380_Pad +Mounting Hole 4.3mm, M4, ISO7380 +mounting hole 4.3mm m4 iso7380 +0 +1 +1 +MountingHole +MountingHole_4.3mm_M4_ISO7380_Pad_TopBottom +Mounting Hole 4.3mm, M4, ISO7380 +mounting hole 4.3mm m4 iso7380 +0 +3 +1 +MountingHole +MountingHole_4.3mm_M4_ISO7380_Pad_TopOnly +Mounting Hole 4.3mm, M4, ISO7380 +mounting hole 4.3mm m4 iso7380 +0 +2 +1 +MountingHole +MountingHole_4.3mm_M4_ISO14580 +Mounting Hole 4.3mm, no annular, M4, ISO14580 +mounting hole 4.3mm no annular m4 iso14580 +0 +0 +0 +MountingHole +MountingHole_4.3mm_M4_ISO14580_Pad +Mounting Hole 4.3mm, M4, ISO14580 +mounting hole 4.3mm m4 iso14580 +0 +1 +1 +MountingHole +MountingHole_4.3mm_M4_ISO14580_Pad_TopBottom +Mounting Hole 4.3mm, M4, ISO14580 +mounting hole 4.3mm m4 iso14580 +0 +3 +1 +MountingHole +MountingHole_4.3mm_M4_ISO14580_Pad_TopOnly +Mounting Hole 4.3mm, M4, ISO14580 +mounting hole 4.3mm m4 iso14580 +0 +2 +1 +MountingHole +MountingHole_4.3mm_M4_Pad +Mounting Hole 4.3mm, M4 +mounting hole 4.3mm m4 +0 +1 +1 +MountingHole +MountingHole_4.3mm_M4_Pad_TopBottom +Mounting Hole 4.3mm, M4 +mounting hole 4.3mm m4 +0 +3 +1 +MountingHole +MountingHole_4.3mm_M4_Pad_TopOnly +Mounting Hole 4.3mm, M4 +mounting hole 4.3mm m4 +0 +2 +1 +MountingHole +MountingHole_4.3mm_M4_Pad_Via +Mounting Hole 4.3mm, M4 +mounting hole 4.3mm m4 +0 +9 +1 +MountingHole +MountingHole_4.3x6.2mm_M4_Pad +Mounting Hole 4.3x6.2mm, M4 +mounting hole 4.3x6.2mm m4 +0 +1 +1 +MountingHole +MountingHole_4.3x6.2mm_M4_Pad_Via +Mounting Hole 4.3x6.2mm, M4 +mounting hole 4.3x6.2mm m4 +0 +17 +1 +MountingHole +MountingHole_4.5mm +Mounting Hole 4.5mm, no annular +mounting hole 4.5mm no annular +0 +0 +0 +MountingHole +MountingHole_4.5mm_Pad +Mounting Hole 4.5mm +mounting hole 4.5mm +0 +1 +1 +MountingHole +MountingHole_4.5mm_Pad_TopBottom +Mounting Hole 4.5mm +mounting hole 4.5mm +0 +3 +1 +MountingHole +MountingHole_4.5mm_Pad_TopOnly +Mounting Hole 4.5mm +mounting hole 4.5mm +0 +2 +1 +MountingHole +MountingHole_4.5mm_Pad_Via +Mounting Hole 4.5mm +mounting hole 4.5mm +0 +9 +1 +MountingHole +MountingHole_4mm +Mounting Hole 4mm, no annular +mounting hole 4mm no annular +0 +0 +0 +MountingHole +MountingHole_4mm_Pad +Mounting Hole 4mm +mounting hole 4mm +0 +1 +1 +MountingHole +MountingHole_4mm_Pad_TopBottom +Mounting Hole 4mm +mounting hole 4mm +0 +3 +1 +MountingHole +MountingHole_4mm_Pad_TopOnly +Mounting Hole 4mm +mounting hole 4mm +0 +2 +1 +MountingHole +MountingHole_4mm_Pad_Via +Mounting Hole 4mm +mounting hole 4mm +0 +9 +1 +MountingHole +MountingHole_5.3mm_M5 +Mounting Hole 5.3mm, no annular, M5 +mounting hole 5.3mm no annular m5 +0 +0 +0 +MountingHole +MountingHole_5.3mm_M5_DIN965 +Mounting Hole 5.3mm, no annular, M5, DIN965 +mounting hole 5.3mm no annular m5 din965 +0 +0 +0 +MountingHole +MountingHole_5.3mm_M5_DIN965_Pad +Mounting Hole 5.3mm, M5, DIN965 +mounting hole 5.3mm m5 din965 +0 +1 +1 +MountingHole +MountingHole_5.3mm_M5_DIN965_Pad_TopBottom +Mounting Hole 5.3mm, M5, DIN965 +mounting hole 5.3mm m5 din965 +0 +3 +1 +MountingHole +MountingHole_5.3mm_M5_DIN965_Pad_TopOnly +Mounting Hole 5.3mm, M5, DIN965 +mounting hole 5.3mm m5 din965 +0 +2 +1 +MountingHole +MountingHole_5.3mm_M5_ISO7380 +Mounting Hole 5.3mm, no annular, M5, ISO7380 +mounting hole 5.3mm no annular m5 iso7380 +0 +0 +0 +MountingHole +MountingHole_5.3mm_M5_ISO7380_Pad +Mounting Hole 5.3mm, M5, ISO7380 +mounting hole 5.3mm m5 iso7380 +0 +1 +1 +MountingHole +MountingHole_5.3mm_M5_ISO7380_Pad_TopBottom +Mounting Hole 5.3mm, M5, ISO7380 +mounting hole 5.3mm m5 iso7380 +0 +3 +1 +MountingHole +MountingHole_5.3mm_M5_ISO7380_Pad_TopOnly +Mounting Hole 5.3mm, M5, ISO7380 +mounting hole 5.3mm m5 iso7380 +0 +2 +1 +MountingHole +MountingHole_5.3mm_M5_ISO14580 +Mounting Hole 5.3mm, no annular, M5, ISO14580 +mounting hole 5.3mm no annular m5 iso14580 +0 +0 +0 +MountingHole +MountingHole_5.3mm_M5_ISO14580_Pad +Mounting Hole 5.3mm, M5, ISO14580 +mounting hole 5.3mm m5 iso14580 +0 +1 +1 +MountingHole +MountingHole_5.3mm_M5_ISO14580_Pad_TopBottom +Mounting Hole 5.3mm, M5, ISO14580 +mounting hole 5.3mm m5 iso14580 +0 +3 +1 +MountingHole +MountingHole_5.3mm_M5_ISO14580_Pad_TopOnly +Mounting Hole 5.3mm, M5, ISO14580 +mounting hole 5.3mm m5 iso14580 +0 +2 +1 +MountingHole +MountingHole_5.3mm_M5_Pad +Mounting Hole 5.3mm, M5 +mounting hole 5.3mm m5 +0 +1 +1 +MountingHole +MountingHole_5.3mm_M5_Pad_TopBottom +Mounting Hole 5.3mm, M5 +mounting hole 5.3mm m5 +0 +3 +1 +MountingHole +MountingHole_5.3mm_M5_Pad_TopOnly +Mounting Hole 5.3mm, M5 +mounting hole 5.3mm m5 +0 +2 +1 +MountingHole +MountingHole_5.3mm_M5_Pad_Via +Mounting Hole 5.3mm, M5 +mounting hole 5.3mm m5 +0 +9 +1 +MountingHole +MountingHole_5.5mm +Mounting Hole 5.5mm, no annular +mounting hole 5.5mm no annular +0 +0 +0 +MountingHole +MountingHole_5.5mm_Pad +Mounting Hole 5.5mm +mounting hole 5.5mm +0 +1 +1 +MountingHole +MountingHole_5.5mm_Pad_TopBottom +Mounting Hole 5.5mm +mounting hole 5.5mm +0 +3 +1 +MountingHole +MountingHole_5.5mm_Pad_TopOnly +Mounting Hole 5.5mm +mounting hole 5.5mm +0 +2 +1 +MountingHole +MountingHole_5.5mm_Pad_Via +Mounting Hole 5.5mm +mounting hole 5.5mm +0 +9 +1 +MountingHole +MountingHole_5mm +Mounting Hole 5mm, no annular +mounting hole 5mm no annular +0 +0 +0 +MountingHole +MountingHole_5mm_Pad +Mounting Hole 5mm +mounting hole 5mm +0 +1 +1 +MountingHole +MountingHole_5mm_Pad_TopBottom +Mounting Hole 5mm +mounting hole 5mm +0 +3 +1 +MountingHole +MountingHole_5mm_Pad_TopOnly +Mounting Hole 5mm +mounting hole 5mm +0 +2 +1 +MountingHole +MountingHole_5mm_Pad_Via +Mounting Hole 5mm +mounting hole 5mm +0 +9 +1 +MountingHole +MountingHole_6.4mm_M6 +Mounting Hole 6.4mm, no annular, M6 +mounting hole 6.4mm no annular m6 +0 +0 +0 +MountingHole +MountingHole_6.4mm_M6_DIN965 +Mounting Hole 6.4mm, no annular, M6, DIN965 +mounting hole 6.4mm no annular m6 din965 +0 +0 +0 +MountingHole +MountingHole_6.4mm_M6_DIN965_Pad +Mounting Hole 6.4mm, M6, DIN965 +mounting hole 6.4mm m6 din965 +0 +1 +1 +MountingHole +MountingHole_6.4mm_M6_DIN965_Pad_TopBottom +Mounting Hole 6.4mm, M6, DIN965 +mounting hole 6.4mm m6 din965 +0 +3 +1 +MountingHole +MountingHole_6.4mm_M6_DIN965_Pad_TopOnly +Mounting Hole 6.4mm, M6, DIN965 +mounting hole 6.4mm m6 din965 +0 +2 +1 +MountingHole +MountingHole_6.4mm_M6_ISO7380 +Mounting Hole 6.4mm, no annular, M6, ISO7380 +mounting hole 6.4mm no annular m6 iso7380 +0 +0 +0 +MountingHole +MountingHole_6.4mm_M6_ISO7380_Pad +Mounting Hole 6.4mm, M6, ISO7380 +mounting hole 6.4mm m6 iso7380 +0 +1 +1 +MountingHole +MountingHole_6.4mm_M6_ISO7380_Pad_TopBottom +Mounting Hole 6.4mm, M6, ISO7380 +mounting hole 6.4mm m6 iso7380 +0 +3 +1 +MountingHole +MountingHole_6.4mm_M6_ISO7380_Pad_TopOnly +Mounting Hole 6.4mm, M6, ISO7380 +mounting hole 6.4mm m6 iso7380 +0 +2 +1 +MountingHole +MountingHole_6.4mm_M6_ISO14580 +Mounting Hole 6.4mm, no annular, M6, ISO14580 +mounting hole 6.4mm no annular m6 iso14580 +0 +0 +0 +MountingHole +MountingHole_6.4mm_M6_ISO14580_Pad +Mounting Hole 6.4mm, M6, ISO14580 +mounting hole 6.4mm m6 iso14580 +0 +1 +1 +MountingHole +MountingHole_6.4mm_M6_ISO14580_Pad_TopBottom +Mounting Hole 6.4mm, M6, ISO14580 +mounting hole 6.4mm m6 iso14580 +0 +3 +1 +MountingHole +MountingHole_6.4mm_M6_ISO14580_Pad_TopOnly +Mounting Hole 6.4mm, M6, ISO14580 +mounting hole 6.4mm m6 iso14580 +0 +2 +1 +MountingHole +MountingHole_6.4mm_M6_Pad +Mounting Hole 6.4mm, M6 +mounting hole 6.4mm m6 +0 +1 +1 +MountingHole +MountingHole_6.4mm_M6_Pad_TopBottom +Mounting Hole 6.4mm, M6 +mounting hole 6.4mm m6 +0 +3 +1 +MountingHole +MountingHole_6.4mm_M6_Pad_TopOnly +Mounting Hole 6.4mm, M6 +mounting hole 6.4mm m6 +0 +2 +1 +MountingHole +MountingHole_6.4mm_M6_Pad_Via +Mounting Hole 6.4mm, M6 +mounting hole 6.4mm m6 +0 +9 +1 +MountingHole +MountingHole_6.5mm +Mounting Hole 6.5mm, no annular +mounting hole 6.5mm no annular +0 +0 +0 +MountingHole +MountingHole_6.5mm_Pad +Mounting Hole 6.5mm +mounting hole 6.5mm +0 +1 +1 +MountingHole +MountingHole_6.5mm_Pad_TopBottom +Mounting Hole 6.5mm +mounting hole 6.5mm +0 +3 +1 +MountingHole +MountingHole_6.5mm_Pad_TopOnly +Mounting Hole 6.5mm +mounting hole 6.5mm +0 +2 +1 +MountingHole +MountingHole_6.5mm_Pad_Via +Mounting Hole 6.5mm +mounting hole 6.5mm +0 +9 +1 +MountingHole +MountingHole_6mm +Mounting Hole 6mm, no annular +mounting hole 6mm no annular +0 +0 +0 +MountingHole +MountingHole_6mm_Pad +Mounting Hole 6mm +mounting hole 6mm +0 +1 +1 +MountingHole +MountingHole_6mm_Pad_TopBottom +Mounting Hole 6mm +mounting hole 6mm +0 +3 +1 +MountingHole +MountingHole_6mm_Pad_TopOnly +Mounting Hole 6mm +mounting hole 6mm +0 +2 +1 +MountingHole +MountingHole_6mm_Pad_Via +Mounting Hole 6mm +mounting hole 6mm +0 +9 +1 +MountingHole +MountingHole_8.4mm_M8 +Mounting Hole 8.4mm, no annular, M8 +mounting hole 8.4mm no annular m8 +0 +0 +0 +MountingHole +MountingHole_8.4mm_M8_Pad +Mounting Hole 8.4mm, M8 +mounting hole 8.4mm m8 +0 +1 +1 +MountingHole +MountingHole_8.4mm_M8_Pad_TopBottom +Mounting Hole 8.4mm, M8 +mounting hole 8.4mm m8 +0 +3 +1 +MountingHole +MountingHole_8.4mm_M8_Pad_TopOnly +Mounting Hole 8.4mm, M8 +mounting hole 8.4mm m8 +0 +2 +1 +MountingHole +MountingHole_8.4mm_M8_Pad_Via +Mounting Hole 8.4mm, M8 +mounting hole 8.4mm m8 +0 +9 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSE-ExternalM3_H5mm_9771050360 +Mounting Hardware, external M3, height 5, Wuerth electronics 9771050360 (https://katalog.we-online.com/em/datasheet/9771050360.pdf), generated with kicad-footprint-generator +Mounting M3 9771050360 +0 +6 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSE-ExternalM3_H6mm_9771060360 +Mounting Hardware, external M3, height 6, Wuerth electronics 9771060360 (https://katalog.we-online.com/em/datasheet/9771060360.pdf), generated with kicad-footprint-generator +Mounting M3 9771060360 +0 +6 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSE-ExternalM3_H7mm_9771070360 +Mounting Hardware, external M3, height 7, Wuerth electronics 9771070360 (https://katalog.we-online.com/em/datasheet/9771070360.pdf), generated with kicad-footprint-generator +Mounting M3 9771070360 +0 +6 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSE-ExternalM3_H8mm_9771080360 +Mounting Hardware, external M3, height 8, Wuerth electronics 9771080360 (https://katalog.we-online.com/em/datasheet/9771080360.pdf), generated with kicad-footprint-generator +Mounting M3 9771080360 +0 +6 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSE-ExternalM3_H9mm_9771090360 +Mounting Hardware, external M3, height 9, Wuerth electronics 9771090360 (https://katalog.we-online.com/em/datasheet/9771090360.pdf), generated with kicad-footprint-generator +Mounting M3 9771090360 +0 +6 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSE-ExternalM3_H10mm_9771100360 +Mounting Hardware, external M3, height 10, Wuerth electronics 9771100360 (https://katalog.we-online.com/em/datasheet/9771100360.pdf), generated with kicad-footprint-generator +Mounting M3 9771100360 +0 +6 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSE-ExternalM3_H11mm_9771110360 +Mounting Hardware, external M3, height 11, Wuerth electronics 9771110360 (https://katalog.we-online.com/em/datasheet/9771110360.pdf), generated with kicad-footprint-generator +Mounting M3 9771110360 +0 +6 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSE-ExternalM3_H12mm_9771120360 +Mounting Hardware, external M3, height 12, Wuerth electronics 9771120360 (https://katalog.we-online.com/em/datasheet/9771120360.pdf), generated with kicad-footprint-generator +Mounting M3 9771120360 +0 +6 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSE-ExternalM3_H13mm_9771130360 +Mounting Hardware, external M3, height 13, Wuerth electronics 9771130360 (https://katalog.we-online.com/em/datasheet/9771130360.pdf), generated with kicad-footprint-generator +Mounting M3 9771130360 +0 +6 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSE-ExternalM3_H14mm_9771140360 +Mounting Hardware, external M3, height 14, Wuerth electronics 9771140360 (https://katalog.we-online.com/em/datasheet/9771140360.pdf), generated with kicad-footprint-generator +Mounting M3 9771140360 +0 +6 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSE-ExternalM3_H15mm_9771150360 +Mounting Hardware, external M3, height 15, Wuerth electronics 9771150360 (https://katalog.we-online.com/em/datasheet/9771150360.pdf), generated with kicad-footprint-generator +Mounting M3 9771150360 +0 +6 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-4.5mm_H1mm_9774010482 +Mounting Hardware, inside through hole 4.5mm, height 1, Wuerth electronics 9774010482 (https://katalog.we-online.de/em/datasheet/9774010482.pdf), generated with kicad-footprint-generator +Mounting 4.5mm 9774010482 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-4.5mm_H2mm_9774020482 +Mounting Hardware, inside through hole 4.5mm, height 2, Wuerth electronics 9774020482 (https://katalog.we-online.de/em/datasheet/9774020482.pdf), generated with kicad-footprint-generator +Mounting 4.5mm 9774020482 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-4.5mm_H3mm_9774030482 +Mounting Hardware, inside through hole 4.5mm, height 3, Wuerth electronics 9774030482 (https://katalog.we-online.de/em/datasheet/9774030482.pdf), generated with kicad-footprint-generator +Mounting 4.5mm 9774030482 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-4.5mm_H4mm_9774040482 +Mounting Hardware, inside through hole 4.5mm, height 4, Wuerth electronics 9774040482 (https://katalog.we-online.de/em/datasheet/9774040482.pdf), generated with kicad-footprint-generator +Mounting 4.5mm 9774040482 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-4.5mm_H5mm_9774050482 +Mounting Hardware, inside through hole 4.5mm, height 5, Wuerth electronics 9774050482 (https://katalog.we-online.de/em/datasheet/9774050482.pdf), generated with kicad-footprint-generator +Mounting 4.5mm 9774050482 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-4.5mm_H6mm_9774060482 +Mounting Hardware, inside through hole 4.5mm, height 6, Wuerth electronics 9774060482 (https://katalog.we-online.de/em/datasheet/9774060482.pdf), generated with kicad-footprint-generator +Mounting 4.5mm 9774060482 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-4.5mm_H7mm_9774070482 +Mounting Hardware, inside through hole 4.5mm, height 7, Wuerth electronics 9774070482 (https://katalog.we-online.de/em/datasheet/9774070482.pdf), generated with kicad-footprint-generator +Mounting 4.5mm 9774070482 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-4.5mm_H8mm_9774080482 +Mounting Hardware, inside through hole 4.5mm, height 8, Wuerth electronics 9774080482 (https://katalog.we-online.de/em/datasheet/9774080482.pdf), generated with kicad-footprint-generator +Mounting 4.5mm 9774080482 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-4.5mm_H9mm_9774090482 +Mounting Hardware, inside through hole 4.5mm, height 9, Wuerth electronics 9774090482 (https://katalog.we-online.de/em/datasheet/9774090482.pdf), generated with kicad-footprint-generator +Mounting 4.5mm 9774090482 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-4.5mm_H10mm_9774100482 +Mounting Hardware, inside through hole 4.5mm, height 10, Wuerth electronics 9774100482 (https://katalog.we-online.de/em/datasheet/9774100482.pdf), generated with kicad-footprint-generator +Mounting 4.5mm 9774100482 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M1.6_H1.5mm_9774015633 +Mounting Hardware, inside through hole M1.6, height 1.5, Wuerth electronics 9774015633 (https://katalog.we-online.com/em/datasheet/9774015633.pdf), generated with kicad-footprint-generator +Mounting M1.6 9774015633 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M1.6_H1mm_9774010633 +Mounting Hardware, inside through hole M1.6, height 1, Wuerth electronics 9774010633 (https://katalog.we-online.com/em/datasheet/9774010633.pdf), generated with kicad-footprint-generator +Mounting M1.6 9774010633 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M1.6_H2.5mm_9774025633 +Mounting Hardware, inside through hole M1.6, height 2.5, Wuerth electronics 9774025633 (https://katalog.we-online.com/em/datasheet/9774025633.pdf), generated with kicad-footprint-generator +Mounting M1.6 9774025633 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M1.6_H2.5mm_ThreadDepth1.5mm_97730256332 +Mounting Hardware, inside blind hole M1.6, height 2.5, Wuerth electronics 97730256332 (https://katalog.we-online.com/em/datasheet/97730256332.pdf), generated with kicad-footprint-generator +Mounting M1.6 97730256332 +0 +6 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M1.6_H2.5mm_ThreadDepth1.5mm_NoNPTH_97730256330 +Mounting Hardware, inside blind hole M1.6, height 2.5, Wuerth electronics 97730256330 (https://katalog.we-online.com/em/datasheet/97730256330R.pdf), generated with kicad-footprint-generator +Mounting M1.6 97730256330 +0 +5 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M1.6_H2mm_9774020633 +Mounting Hardware, inside through hole M1.6, height 2, Wuerth electronics 9774020633 (https://katalog.we-online.com/em/datasheet/9774020633.pdf), generated with kicad-footprint-generator +Mounting M1.6 9774020633 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M1.6_H3.5mm_ThreadDepth2mm_97730356332 +Mounting Hardware, inside blind hole M1.6, height 3.5, Wuerth electronics 97730356332 (https://katalog.we-online.com/em/datasheet/97730356332.pdf), generated with kicad-footprint-generator +Mounting M1.6 97730356332 +0 +6 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M1.6_H3.5mm_ThreadDepth2mm_97730356334 +Mounting Hardware, inside blind hole M1.6, height 3.5, Wuerth electronics 97730356334 (https://katalog.we-online.com/em/datasheet/97730356334.pdf), generated with kicad-footprint-generator +Mounting M1.6 97730356334 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M1.6_H3.5mm_ThreadDepth2mm_NoNPTH_97730356330 +Mounting Hardware, inside blind hole M1.6, height 3.5, Wuerth electronics 97730356330 (https://katalog.we-online.com/em/datasheet/97730356330.pdf), generated with kicad-footprint-generator +Mounting M1.6 97730356330 +0 +5 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M1.6_H3mm_9774030633 +Mounting Hardware, inside through hole M1.6, height 3, Wuerth electronics 9774030633 (https://katalog.we-online.com/em/datasheet/9774030633.pdf), generated with kicad-footprint-generator +Mounting M1.6 9774030633 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M1.6_H3mm_ThreadDepth1.8mm_97730306332 +Mounting Hardware, inside blind hole M1.6, height 3, Wuerth electronics 97730306332 (https://katalog.we-online.com/em/datasheet/97730306332.pdf), generated with kicad-footprint-generator +Mounting M1.6 97730306332 +0 +6 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M1.6_H3mm_ThreadDepth1.8mm_NoNPTH_97730306330 +Mounting Hardware, inside blind hole M1.6, height 3, Wuerth electronics 97730306330 (https://katalog.we-online.com/em/datasheet/97730306330.pdf), generated with kicad-footprint-generator +Mounting M1.6 97730306330 +0 +5 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M1.6_H4.5mm_ThreadDepth2mm_97730456332 +Mounting Hardware, inside blind hole M1.6, height 4.5, Wuerth electronics 97730456332 (https://katalog.we-online.com/em/datasheet/97730456332.pdf), generated with kicad-footprint-generator +Mounting M1.6 97730456332 +0 +6 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M1.6_H4.5mm_ThreadDepth2mm_97730456334 +Mounting Hardware, inside blind hole M1.6, height 4.5, Wuerth electronics 97730456334 (https://katalog.we-online.com/em/datasheet/97730456334.pdf), generated with kicad-footprint-generator +Mounting M1.6 97730456334 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M1.6_H4.5mm_ThreadDepth2mm_NoNPTH_97730456330 +Mounting Hardware, inside blind hole M1.6, height 4.5, Wuerth electronics 97730456330 (https://katalog.we-online.com/em/datasheet/97730456330.pdf), generated with kicad-footprint-generator +Mounting M1.6 97730456330 +0 +5 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M1.6_H4mm_ThreadDepth2mm_97730406332 +Mounting Hardware, inside blind hole M1.6, height 4, Wuerth electronics 97730406332 (https://katalog.we-online.com/em/datasheet/97730406332.pdf), generated with kicad-footprint-generator +Mounting M1.6 97730406332 +0 +6 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M1.6_H4mm_ThreadDepth2mm_97730406334 +Mounting Hardware, inside blind hole M1.6, height 4, Wuerth electronics 97730406334 (https://katalog.we-online.com/em/datasheet/97730406334.pdf), generated with kicad-footprint-generator +Mounting M1.6 97730406334 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M1.6_H4mm_ThreadDepth2mm_NoNPTH_97730406330 +Mounting Hardware, inside blind hole M1.6, height 4, Wuerth electronics 97730406330 (https://katalog.we-online.com/em/datasheet/97730406330.pdf), generated with kicad-footprint-generator +Mounting M1.6 97730406330 +0 +5 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M1.6_H5mm_ThreadDepth2mm_97730506332 +Mounting Hardware, inside blind hole M1.6, height 5, Wuerth electronics 97730506332 (https://katalog.we-online.com/em/datasheet/97730506332.pdf), generated with kicad-footprint-generator +Mounting M1.6 97730506332 +0 +6 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M1.6_H5mm_ThreadDepth2mm_97730506334 +Mounting Hardware, inside blind hole M1.6, height 5, Wuerth electronics 97730506334 (https://katalog.we-online.com/em/datasheet/97730506334.pdf), generated with kicad-footprint-generator +Mounting M1.6 97730506334 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M1.6_H5mm_ThreadDepth2mm_NoNPTH_97730506330 +Mounting Hardware, inside blind hole M1.6, height 5, Wuerth electronics 97730506330 (https://katalog.we-online.com/em/datasheet/97730506330.pdf), generated with kicad-footprint-generator +Mounting M1.6 97730506330 +0 +5 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M1.6_H6mm_ThreadDepth2mm_97730606332 +Mounting Hardware, inside blind hole M1.6, height 6, Wuerth electronics 97730606332 (https://katalog.we-online.com/em/datasheet/97730606332.pdf), generated with kicad-footprint-generator +Mounting M1.6 97730606332 +0 +6 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M1.6_H6mm_ThreadDepth2mm_97730606334 +Mounting Hardware, inside blind hole M1.6, height 6, Wuerth electronics 97730606334 (https://katalog.we-online.com/em/datasheet/97730606334.pdf), generated with kicad-footprint-generator +Mounting M1.6 97730606334 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M1.6_H6mm_ThreadDepth2mm_NoNPTH_97730606330 +Mounting Hardware, inside blind hole M1.6, height 6, Wuerth electronics 97730606330 (https://katalog.we-online.com/em/datasheet/97730606330.pdf), generated with kicad-footprint-generator +Mounting M1.6 97730606330 +0 +5 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M2_H1.5mm_9774015243 +Mounting Hardware, inside through hole M2, height 1.5, Wuerth electronics 9774015243 (https://katalog.we-online.de/em/datasheet/9774015243.pdf), generated with kicad-footprint-generator +Mounting M2 9774015243 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M2_H1mm_9774010243 +Mounting Hardware, inside through hole M2, height 1, Wuerth electronics 9774010243 (https://katalog.we-online.de/em/datasheet/9774010243.pdf), generated with kicad-footprint-generator +Mounting M2 9774010243 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M2_H2.5mm_9774025243 +Mounting Hardware, inside through hole M2, height 2.5, Wuerth electronics 9774025243 (https://katalog.we-online.de/em/datasheet/9774025243.pdf), generated with kicad-footprint-generator +Mounting M2 9774025243 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M2_H2mm_9774020243 +Mounting Hardware, inside through hole M2, height 2, Wuerth electronics 9774020243 (https://katalog.we-online.de/em/datasheet/9774020243.pdf), generated with kicad-footprint-generator +Mounting M2 9774020243 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M2_H3.5mm_9774035243 +Mounting Hardware, inside through hole M2, height 3.5, Wuerth electronics 9774035243 (https://katalog.we-online.de/em/datasheet/9774035243.pdf), generated with kicad-footprint-generator +Mounting M2 9774035243 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M2_H3mm_9774030243 +Mounting Hardware, inside through hole M2, height 3, Wuerth electronics 9774030243 (https://katalog.we-online.de/em/datasheet/9774030243.pdf), generated with kicad-footprint-generator +Mounting M2 9774030243 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M2_H4.5mm_9774045243 +Mounting Hardware, inside through hole M2, height 4.5, Wuerth electronics 9774045243 (https://katalog.we-online.de/em/datasheet/9774045243.pdf), generated with kicad-footprint-generator +Mounting M2 9774045243 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M2_H4mm_9774040243 +Mounting Hardware, inside through hole M2, height 4, Wuerth electronics 9774040243 (https://katalog.we-online.de/em/datasheet/9774040243.pdf), generated with kicad-footprint-generator +Mounting M2 9774040243 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M2_H5mm_9774050243 +Mounting Hardware, inside through hole M2, height 5, Wuerth electronics 9774050243 (https://katalog.we-online.de/em/datasheet/9774050243.pdf), generated with kicad-footprint-generator +Mounting M2 9774050243 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M2_H6mm_9774060243 +Mounting Hardware, inside through hole M2, height 6, Wuerth electronics 9774060243 (https://katalog.we-online.de/em/datasheet/9774060243.pdf), generated with kicad-footprint-generator +Mounting M2 9774060243 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M2_H7mm_9774070243 +Mounting Hardware, inside through hole M2, height 7, Wuerth electronics 9774070243 (https://katalog.we-online.de/em/datasheet/9774070243.pdf), generated with kicad-footprint-generator +Mounting M2 9774070243 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M2_H8mm_9774080243 +Mounting Hardware, inside through hole M2, height 8, Wuerth electronics 9774080243 (https://katalog.we-online.de/em/datasheet/9774080243.pdf), generated with kicad-footprint-generator +Mounting M2 9774080243 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M3_H1.5mm_9774015360 +Mounting Hardware, inside through hole M3, height 1.5, Wuerth electronics 9774015360 (https://katalog.we-online.de/em/datasheet/9774015360.pdf), generated with kicad-footprint-generator +Mounting M3 9774015360 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M3_H1mm_9774010360 +Mounting Hardware, inside through hole M3, height 1, Wuerth electronics 9774010360 (https://katalog.we-online.de/em/datasheet/9774010360.pdf), generated with kicad-footprint-generator +Mounting M3 9774010360 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M3_H2.5mm_9774025360 +Mounting Hardware, inside through hole M3, height 2.5, Wuerth electronics 9774025360 (https://katalog.we-online.de/em/datasheet/9774025360.pdf), generated with kicad-footprint-generator +Mounting M3 9774025360 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M3_H2mm_9774020360 +Mounting Hardware, inside through hole M3, height 2, Wuerth electronics 9774020360 (https://katalog.we-online.de/em/datasheet/9774020360.pdf), generated with kicad-footprint-generator +Mounting M3 9774020360 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M3_H3mm_9774030360 +Mounting Hardware, inside through hole M3, height 3, Wuerth electronics 9774030360 (https://katalog.we-online.de/em/datasheet/9774030360R.pdf), generated with kicad-footprint-generator +Mounting M3 9774030360 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M3_H4mm_9774040360 +Mounting Hardware, inside through hole M3, height 4, Wuerth electronics 9774040360 (https://katalog.we-online.de/em/datasheet/9774040360.pdf), generated with kicad-footprint-generator +Mounting M3 9774040360 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M3_H5mm_9774050360 +Mounting Hardware, inside through hole M3, height 5, Wuerth electronics 9774050360 (https://katalog.we-online.de/em/datasheet/9774050360.pdf), generated with kicad-footprint-generator +Mounting M3 9774050360 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M3_H6mm_9774060360 +Mounting Hardware, inside through hole M3, height 6, Wuerth electronics 9774060360 (https://katalog.we-online.de/em/datasheet/9774060360.pdf), generated with kicad-footprint-generator +Mounting M3 9774060360 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M3_H7mm_9774070360 +Mounting Hardware, inside through hole M3, height 7, Wuerth electronics 9774070360 (https://katalog.we-online.de/em/datasheet/9774070360.pdf), generated with kicad-footprint-generator +Mounting M3 9774070360 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M3_H8mm_9774080360 +Mounting Hardware, inside through hole M3, height 8, Wuerth electronics 9774080360 (https://katalog.we-online.de/em/datasheet/9774080360.pdf), generated with kicad-footprint-generator +Mounting M3 9774080360 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M3_H9mm_9774090360 +Mounting Hardware, inside through hole M3, height 9, Wuerth electronics 9774090360 (https://katalog.we-online.de/em/datasheet/9774090360.pdf), generated with kicad-footprint-generator +Mounting M3 9774090360 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M3_H10mm_9774100360 +Mounting Hardware, inside through hole M3, height 10, Wuerth electronics 9774100360 (https://katalog.we-online.de/em/datasheet/9774100360.pdf), generated with kicad-footprint-generator +Mounting M3 9774100360 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M3_H11mm_9774110360 +Mounting Hardware, inside through hole M3, height 11, Wuerth electronics 9774110360 (https://katalog.we-online.de/em/datasheet/9774110360.pdf), generated with kicad-footprint-generator +Mounting M3 9774110360 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M3_H12mm_9774120360 +Mounting Hardware, inside through hole M3, height 12, Wuerth electronics 9774120360 (https://katalog.we-online.de/em/datasheet/9774120360.pdf), generated with kicad-footprint-generator +Mounting M3 9774120360 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M3_H13mm_9774130360 +Mounting Hardware, inside through hole M3, height 13, Wuerth electronics 9774130360 (https://katalog.we-online.de/em/datasheet/9774130360.pdf), generated with kicad-footprint-generator +Mounting M3 9774130360 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M3_H14mm_9774140360 +Mounting Hardware, inside through hole M3, height 14, Wuerth electronics 9774140360 (https://katalog.we-online.de/em/datasheet/9774140360.pdf), generated with kicad-footprint-generator +Mounting M3 9774140360 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSI-M3_H15mm_9774150360 +Mounting Hardware, inside through hole M3, height 15, Wuerth electronics 9774150360 (https://katalog.we-online.de/em/datasheet/9774150360.pdf), generated with kicad-footprint-generator +Mounting M3 9774150360 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSR-3.2mm_H2.6mm_ReverseMount_9775026960 +Mounting Hardware, inside through hole 3.2mm, height 2.6, Wuerth electronics 9775026960 (https://katalog.we-online.com/em/datasheet/9775026960R.pdf), generated with kicad-footprint-generator +Mounting 3.2mm 9775026960 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSR-3.2mm_H3.1mm_ReverseMount_9775031960 +Mounting Hardware, inside through hole 3.2mm, height 3.1, Wuerth electronics 9775031960 (https://katalog.we-online.com/em/datasheet/9775031960.pdf), generated with kicad-footprint-generator +Mounting 3.2mm 9775031960 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSR-3.2mm_H3.6mm_ReverseMount_9775036960 +Mounting Hardware, inside through hole 3.2mm, height 3.6, Wuerth electronics 9775036960 (https://katalog.we-online.com/em/datasheet/9775036960.pdf), generated with kicad-footprint-generator +Mounting 3.2mm 9775036960 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSR-3.2mm_H4.1mm_ReverseMount_9775041960 +Mounting Hardware, inside through hole 3.2mm, height 4.1, Wuerth electronics 9775041960 (https://katalog.we-online.com/em/datasheet/9775041960.pdf), generated with kicad-footprint-generator +Mounting 3.2mm 9775041960 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSR-3.2mm_H4.6mm_ReverseMount_9775046960 +Mounting Hardware, inside through hole 3.2mm, height 4.6, Wuerth electronics 9775046960 (https://katalog.we-online.com/em/datasheet/9775046960.pdf), generated with kicad-footprint-generator +Mounting 3.2mm 9775046960 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSR-3.2mm_H5.1mm_ReverseMount_9775051960 +Mounting Hardware, inside through hole 3.2mm, height 5.1, Wuerth electronics 9775051960 (https://katalog.we-online.com/em/datasheet/9775051960.pdf), generated with kicad-footprint-generator +Mounting 3.2mm 9775051960 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSR-3.2mm_H5.6mm_ReverseMount_9775056960 +Mounting Hardware, inside through hole 3.2mm, height 5.6, Wuerth electronics 9775056960 (https://katalog.we-online.com/em/datasheet/9775056960.pdf), generated with kicad-footprint-generator +Mounting 3.2mm 9775056960 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSR-3.2mm_H6.6mm_ReverseMount_9775066960 +Mounting Hardware, inside through hole 3.2mm, height 6.6, Wuerth electronics 9775066960 (https://katalog.we-online.com/em/datasheet/9775066960.pdf), generated with kicad-footprint-generator +Mounting 3.2mm 9775066960 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSR-3.2mm_H7.6mm_ReverseMount_9775076960 +Mounting Hardware, inside through hole 3.2mm, height 7.6, Wuerth electronics 9775076960 (https://katalog.we-online.com/em/datasheet/9775076960.pdf), generated with kicad-footprint-generator +Mounting 3.2mm 9775076960 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSR-3.2mm_H8.6mm_ReverseMount_9775086960 +Mounting Hardware, inside through hole 3.2mm, height 8.6, Wuerth electronics 9775086960 (https://katalog.we-online.com/em/datasheet/9775086960.pdf), generated with kicad-footprint-generator +Mounting 3.2mm 9775086960 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSR-3.2mm_H9.6mm_ReverseMount_9775096960 +Mounting Hardware, inside through hole 3.2mm, height 9.6, Wuerth electronics 9775096960 (https://katalog.we-online.com/em/datasheet/9775096960.pdf), generated with kicad-footprint-generator +Mounting 3.2mm 9775096960 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSR-3.2mm_H10.6mm_ReverseMount_9775106960 +Mounting Hardware, inside through hole 3.2mm, height 10.6, Wuerth electronics 9775106960 (https://katalog.we-online.com/em/datasheet/9775106960.pdf), generated with kicad-footprint-generator +Mounting 3.2mm 9775106960 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSR-3.2mm_H11.6mm_ReverseMount_9775116960 +Mounting Hardware, inside through hole 3.2mm, height 11.6, Wuerth electronics 9775116960 (https://katalog.we-online.com/em/datasheet/9775116960.pdf), generated with kicad-footprint-generator +Mounting 3.2mm 9775116960 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSR-M3_H2.6mm_ReverseMount_9775026360 +Mounting Hardware, inside through hole M3, height 2.6, Wuerth electronics 9775026360 (https://katalog.we-online.com/em/datasheet/9775026360.pdf), generated with kicad-footprint-generator +Mounting M3 9775026360 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSR-M3_H3.1mm_ReverseMount_9775031360 +Mounting Hardware, inside through hole M3, height 3.1, Wuerth electronics 9775031360 (https://katalog.we-online.com/em/datasheet/9775031360.pdf), generated with kicad-footprint-generator +Mounting M3 9775031360 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSR-M3_H3.6mm_ReverseMount_9775036360 +Mounting Hardware, inside through hole M3, height 3.6, Wuerth electronics 9775036360 (https://katalog.we-online.com/em/datasheet/9775036360.pdf), generated with kicad-footprint-generator +Mounting M3 9775036360 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSR-M3_H4.1mm_ReverseMount_9775041360 +Mounting Hardware, inside through hole M3, height 4.1, Wuerth electronics 9775041360 (https://katalog.we-online.com/em/datasheet/9775041360.pdf), generated with kicad-footprint-generator +Mounting M3 9775041360 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSR-M3_H4.6mm_ReverseMount_9775046360 +Mounting Hardware, inside through hole M3, height 4.6, Wuerth electronics 9775046360 (https://katalog.we-online.com/em/datasheet/9775046360.pdf), generated with kicad-footprint-generator +Mounting M3 9775046360 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSR-M3_H5.1mm_ReverseMount_9775051360 +Mounting Hardware, inside through hole M3, height 5.1, Wuerth electronics 9775051360 (https://katalog.we-online.com/em/datasheet/9775051360.pdf), generated with kicad-footprint-generator +Mounting M3 9775051360 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSR-M3_H5.6mm_ReverseMount_9775056360 +Mounting Hardware, inside through hole M3, height 5.6, Wuerth electronics 9775056360 (https://katalog.we-online.com/em/datasheet/9775056360.pdf), generated with kicad-footprint-generator +Mounting M3 9775056360 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSR-M3_H6.6mm_ReverseMount_9775066360 +Mounting Hardware, inside through hole M3, height 6.6, Wuerth electronics 9775066360 (https://katalog.we-online.com/em/datasheet/9775066360.pdf), generated with kicad-footprint-generator +Mounting M3 9775066360 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSR-M3_H7.6mm_ReverseMount_9775076360 +Mounting Hardware, inside through hole M3, height 7.6, Wuerth electronics 9775076360 (https://katalog.we-online.com/em/datasheet/9775076360.pdf), generated with kicad-footprint-generator +Mounting M3 9775076360 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSR-M3_H8.6mm_ReverseMount_9775086360 +Mounting Hardware, inside through hole M3, height 8.6, Wuerth electronics 9775086360 (https://katalog.we-online.com/em/datasheet/9775086360.pdf), generated with kicad-footprint-generator +Mounting M3 9775086360 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSR-M3_H9.6mm_ReverseMount_9775096360 +Mounting Hardware, inside through hole M3, height 9.6, Wuerth electronics 9775096360 (https://katalog.we-online.com/em/datasheet/9775096360.pdf), generated with kicad-footprint-generator +Mounting M3 9775096360 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSR-M3_H10.6mm_ReverseMount_9775106360 +Mounting Hardware, inside through hole M3, height 10.6, Wuerth electronics 9775106360 (https://katalog.we-online.com/em/datasheet/9775106360.pdf), generated with kicad-footprint-generator +Mounting M3 9775106360 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSR-M3_H11.6mm_ReverseMount_9775116360 +Mounting Hardware, inside through hole M3, height 11.6, Wuerth electronics 9775116360 (https://katalog.we-online.com/em/datasheet/9775116360.pdf), generated with kicad-footprint-generator +Mounting M3 9775116360 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSSR-3.3mm_H2.5mm_SnapRivet_9776025960 +Mounting Hardware, inside through hole 3.3mm, height 2.5, Wuerth electronics 9776025960 (https://katalog.we-online.com/em/datasheet/9776025960.pdf), generated with kicad-footprint-generator +Mounting 3.3mm 9776025960 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSSR-3.3mm_H2mm_SnapRivet_9776020960 +Mounting Hardware, inside through hole 3.3mm, height 2, Wuerth electronics 9776020960 (https://katalog.we-online.com/em/datasheet/9776020960.pdf), generated with kicad-footprint-generator +Mounting 3.3mm 9776020960 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSSR-3.3mm_H3mm_SnapRivet_9776030960 +Mounting Hardware, inside through hole 3.3mm, height 3, Wuerth electronics 9776030960 (https://katalog.we-online.com/em/datasheet/9776030960.pdf), generated with kicad-footprint-generator +Mounting 3.3mm 9776030960 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSSR-3.3mm_H4mm_SnapRivet_9776040960 +Mounting Hardware, inside through hole 3.3mm, height 4, Wuerth electronics 9776040960 (https://katalog.we-online.com/em/datasheet/9776040960.pdf), generated with kicad-footprint-generator +Mounting 3.3mm 9776040960 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSSR-3.3mm_H5mm_SnapRivet_9776050960 +Mounting Hardware, inside through hole 3.3mm, height 5, Wuerth electronics 9776050960 (https://katalog.we-online.com/em/datasheet/9776050960.pdf), generated with kicad-footprint-generator +Mounting 3.3mm 9776050960 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSSR-3.3mm_H6mm_SnapRivet_9776060960 +Mounting Hardware, inside through hole 3.3mm, height 6, Wuerth electronics 9776060960 (https://katalog.we-online.com/em/datasheet/9776060960.pdf), generated with kicad-footprint-generator +Mounting 3.3mm 9776060960 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSSR-3.3mm_H7mm_SnapRivet_9776070960 +Mounting Hardware, inside through hole 3.3mm, height 7, Wuerth electronics 9776070960 (https://katalog.we-online.com/em/datasheet/9776070960.pdf), generated with kicad-footprint-generator +Mounting 3.3mm 9776070960 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSSR-3.3mm_H8mm_SnapRivet_9776080960 +Mounting Hardware, inside through hole 3.3mm, height 8, Wuerth electronics 9776080960 (https://katalog.we-online.com/em/datasheet/9776080960.pdf), generated with kicad-footprint-generator +Mounting 3.3mm 9776080960 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSSR-3.3mm_H9mm_SnapRivet_9776090960 +Mounting Hardware, inside through hole 3.3mm, height 9, Wuerth electronics 9776090960 (https://katalog.we-online.com/em/datasheet/9776090960.pdf), generated with kicad-footprint-generator +Mounting 3.3mm 9776090960 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMSSR-3.3mm_H10mm_SnapRivet_9776100960 +Mounting Hardware, inside through hole 3.3mm, height 10, Wuerth electronics 9776100960 (https://katalog.we-online.com/em/datasheet/9776100960R.pdf), generated with kicad-footprint-generator +Mounting 3.3mm 9776100960 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-2.7mm_H1.5mm_9774015951 +Mounting Hardware, inside through hole 2.7mm, height 1.5, Wuerth electronics 9774015951 (https://katalog.we-online.de/em/datasheet/9774015951.pdf), generated with kicad-footprint-generator +Mounting 2.7mm 9774015951 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-2.7mm_H1mm_9774010951 +Mounting Hardware, inside through hole 2.7mm, height 1, Wuerth electronics 9774010951 (https://katalog.we-online.de/em/datasheet/9774010951.pdf), generated with kicad-footprint-generator +Mounting 2.7mm 9774010951 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-2.7mm_H2.5mm_9774025951 +Mounting Hardware, inside through hole 2.7mm, height 2.5, Wuerth electronics 9774025951 (https://katalog.we-online.de/em/datasheet/9774025951.pdf), generated with kicad-footprint-generator +Mounting 2.7mm 9774025951 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-2.7mm_H2mm_9774020951 +Mounting Hardware, inside through hole 2.7mm, height 2, Wuerth electronics 9774020951 (https://katalog.we-online.de/em/datasheet/9774020951.pdf), generated with kicad-footprint-generator +Mounting 2.7mm 9774020951 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-2.7mm_H3mm_9774030951 +Mounting Hardware, inside through hole 2.7mm, height 3, Wuerth electronics 9774030951 (https://katalog.we-online.de/em/datasheet/9774030951.pdf), generated with kicad-footprint-generator +Mounting 2.7mm 9774030951 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-2.7mm_H4mm_9774040951 +Mounting Hardware, inside through hole 2.7mm, height 4, Wuerth electronics 9774040951 (https://katalog.we-online.de/em/datasheet/9774040951.pdf), generated with kicad-footprint-generator +Mounting 2.7mm 9774040951 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-2.7mm_H5.5mm_9774055951 +Mounting Hardware, inside through hole 2.7mm, height 5.5, Wuerth electronics 9774055951 (https://katalog.we-online.de/em/datasheet/9774055951.pdf), generated with kicad-footprint-generator +Mounting 2.7mm 9774055951 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-2.7mm_H5mm_9774050951 +Mounting Hardware, inside through hole 2.7mm, height 5, Wuerth electronics 9774050951 (https://katalog.we-online.de/em/datasheet/9774050951.pdf), generated with kicad-footprint-generator +Mounting 2.7mm 9774050951 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-2.7mm_H6.5mm_9774065951 +Mounting Hardware, inside through hole 2.7mm, height 6.5, Wuerth electronics 9774065951 (https://katalog.we-online.de/em/datasheet/9774065951.pdf), generated with kicad-footprint-generator +Mounting 2.7mm 9774065951 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-2.7mm_H6mm_9774060951 +Mounting Hardware, inside through hole 2.7mm, height 6, Wuerth electronics 9774060951 (https://katalog.we-online.de/em/datasheet/9774060951.pdf), generated with kicad-footprint-generator +Mounting 2.7mm 9774060951 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-2.7mm_H7mm_9774070951 +Mounting Hardware, inside through hole 2.7mm, height 7, Wuerth electronics 9774070951 (https://katalog.we-online.de/em/datasheet/9774070951.pdf), generated with kicad-footprint-generator +Mounting 2.7mm 9774070951 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-2.7mm_H8mm_9774080951 +Mounting Hardware, inside through hole 2.7mm, height 8, Wuerth electronics 9774080951 (https://katalog.we-online.de/em/datasheet/9774080951.pdf), generated with kicad-footprint-generator +Mounting 2.7mm 9774080951 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-2.7mm_H9mm_9774090951 +Mounting Hardware, inside through hole 2.7mm, height 9, Wuerth electronics 9774090951 (https://katalog.we-online.de/em/datasheet/9774090951.pdf), generated with kicad-footprint-generator +Mounting 2.7mm 9774090951 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-2.7mm_H10mm_9774100951 +Mounting Hardware, inside through hole 2.7mm, height 10, Wuerth electronics 9774100951 (https://katalog.we-online.de/em/datasheet/9774100951.pdf), generated with kicad-footprint-generator +Mounting 2.7mm 9774100951 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-2.25mm_H1.5mm_9774015943 +Mounting Hardware, inside through hole 2.25mm, height 1.5, Wuerth electronics 9774015943 (https://katalog.we-online.de/em/datasheet/9774015943.pdf), generated with kicad-footprint-generator +Mounting 2.25mm 9774015943 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-2.25mm_H1mm_9774010943 +Mounting Hardware, inside through hole 2.25mm, height 1, Wuerth electronics 9774010943 (https://katalog.we-online.de/em/datasheet/9774010943.pdf), generated with kicad-footprint-generator +Mounting 2.25mm 9774010943 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-2.25mm_H2.5mm_9774025943 +Mounting Hardware, inside through hole 2.25mm, height 2.5, Wuerth electronics 9774025943 (https://katalog.we-online.de/em/datasheet/9774025943.pdf), generated with kicad-footprint-generator +Mounting 2.25mm 9774025943 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-2.25mm_H2mm_9774020943 +Mounting Hardware, inside through hole 2.25mm, height 2, Wuerth electronics 9774020943 (https://katalog.we-online.de/em/datasheet/9774020943.pdf), generated with kicad-footprint-generator +Mounting 2.25mm 9774020943 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-2.25mm_H3.5mm_9774035943 +Mounting Hardware, inside through hole 2.25mm, height 3.5, Wuerth electronics 9774035943 (https://katalog.we-online.de/em/datasheet/9774035943.pdf), generated with kicad-footprint-generator +Mounting 2.25mm 9774035943 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-2.25mm_H3mm_9774030943 +Mounting Hardware, inside through hole 2.25mm, height 3, Wuerth electronics 9774030943 (https://katalog.we-online.de/em/datasheet/9774030943.pdf), generated with kicad-footprint-generator +Mounting 2.25mm 9774030943 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-2.25mm_H4.5mm_9774045943 +Mounting Hardware, inside through hole 2.25mm, height 4.5, Wuerth electronics 9774045943 (https://katalog.we-online.de/em/datasheet/9774045943.pdf), generated with kicad-footprint-generator +Mounting 2.25mm 9774045943 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-2.25mm_H4mm_9774040943 +Mounting Hardware, inside through hole 2.25mm, height 4, Wuerth electronics 9774040943 (https://katalog.we-online.de/em/datasheet/9774040943.pdf), generated with kicad-footprint-generator +Mounting 2.25mm 9774040943 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-2.25mm_H5mm_9774050943 +Mounting Hardware, inside through hole 2.25mm, height 5, Wuerth electronics 9774050943 (https://katalog.we-online.de/em/datasheet/9774050943.pdf), generated with kicad-footprint-generator +Mounting 2.25mm 9774050943 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-2.25mm_H6mm_9774060943 +Mounting Hardware, inside through hole 2.25mm, height 6, Wuerth electronics 9774060943 (https://katalog.we-online.de/em/datasheet/9774060943.pdf), generated with kicad-footprint-generator +Mounting 2.25mm 9774060943 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-2.25mm_H7mm_9774070943 +Mounting Hardware, inside through hole 2.25mm, height 7, Wuerth electronics 9774070943 (https://katalog.we-online.de/em/datasheet/9774070943.pdf), generated with kicad-footprint-generator +Mounting 2.25mm 9774070943 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-2.25mm_H8mm_9774080943 +Mounting Hardware, inside through hole 2.25mm, height 8, Wuerth electronics 9774080943 (https://katalog.we-online.de/em/datasheet/9774080943.pdf), generated with kicad-footprint-generator +Mounting 2.25mm 9774080943 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-3.3mm_H1.5mm_9774015960 +Mounting Hardware, inside through hole 3.3mm, height 1.5, Wuerth electronics 9774015960 (https://katalog.we-online.de/em/datasheet/9774015960.pdf,), generated with kicad-footprint-generator +Mounting 3.3mm 9774015960 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-3.3mm_H1mm_9774010960 +Mounting Hardware, inside through hole 3.3mm, height 1, Wuerth electronics 9774010960 (https://katalog.we-online.de/em/datasheet/9774010960.pdf,), generated with kicad-footprint-generator +Mounting 3.3mm 9774010960 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-3.3mm_H2.5mm_9774025960 +Mounting Hardware, inside through hole 3.3mm, height 2.5, Wuerth electronics 9774025960 (https://katalog.we-online.de/em/datasheet/9774025960.pdf,), generated with kicad-footprint-generator +Mounting 3.3mm 9774025960 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-3.3mm_H2mm_9774020960 +Mounting Hardware, inside through hole 3.3mm, height 2, Wuerth electronics 9774020960 (https://katalog.we-online.de/em/datasheet/9774020960.pdf,), generated with kicad-footprint-generator +Mounting 3.3mm 9774020960 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-3.3mm_H3mm_9774030960 +Mounting Hardware, inside through hole 3.3mm, height 3, Wuerth electronics 9774030960 (https://katalog.we-online.de/em/datasheet/9774030960.pdf,), generated with kicad-footprint-generator +Mounting 3.3mm 9774030960 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-3.3mm_H4mm_9774040960 +Mounting Hardware, inside through hole 3.3mm, height 4, Wuerth electronics 9774040960 (https://katalog.we-online.de/em/datasheet/9774040960.pdf,), generated with kicad-footprint-generator +Mounting 3.3mm 9774040960 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-3.3mm_H5mm_9774050960 +Mounting Hardware, inside through hole 3.3mm, height 5, Wuerth electronics 9774050960 (https://katalog.we-online.de/em/datasheet/9774050960.pdf,), generated with kicad-footprint-generator +Mounting 3.3mm 9774050960 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-3.3mm_H6mm_9774060960 +Mounting Hardware, inside through hole 3.3mm, height 6, Wuerth electronics 9774060960 (https://katalog.we-online.de/em/datasheet/9774060960.pdf,), generated with kicad-footprint-generator +Mounting 3.3mm 9774060960 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-3.3mm_H7mm_9774070960 +Mounting Hardware, inside through hole 3.3mm, height 7, Wuerth electronics 9774070960 (https://katalog.we-online.de/em/datasheet/9774070960.pdf,), generated with kicad-footprint-generator +Mounting 3.3mm 9774070960 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-3.3mm_H8mm_9774080960 +Mounting Hardware, inside through hole 3.3mm, height 8, Wuerth electronics 9774080960 (https://katalog.we-online.de/em/datasheet/9774080960.pdf,), generated with kicad-footprint-generator +Mounting 3.3mm 9774080960 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-3.3mm_H9mm_9774090960 +Mounting Hardware, inside through hole 3.3mm, height 9, Wuerth electronics 9774090960 (https://katalog.we-online.de/em/datasheet/9774090960.pdf,), generated with kicad-footprint-generator +Mounting 3.3mm 9774090960 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-3.3mm_H10mm_9774100960 +Mounting Hardware, inside through hole 3.3mm, height 10, Wuerth electronics 9774100960 (https://katalog.we-online.de/em/datasheet/9774100960.pdf,), generated with kicad-footprint-generator +Mounting 3.3mm 9774100960 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-3.3mm_H11mm_9774110960 +Mounting Hardware, inside through hole 3.3mm, height 11, Wuerth electronics 9774110960 (https://katalog.we-online.de/em/datasheet/9774110960.pdf,), generated with kicad-footprint-generator +Mounting 3.3mm 9774110960 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-3.3mm_H12mm_9774120960 +Mounting Hardware, inside through hole 3.3mm, height 12, Wuerth electronics 9774120960 (https://katalog.we-online.de/em/datasheet/9774120960.pdf,), generated with kicad-footprint-generator +Mounting 3.3mm 9774120960 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-3.3mm_H13mm_9774130960 +Mounting Hardware, inside through hole 3.3mm, height 13, Wuerth electronics 9774130960 (https://katalog.we-online.de/em/datasheet/9774130960.pdf,), generated with kicad-footprint-generator +Mounting 3.3mm 9774130960 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-3.3mm_H14mm_9774140960 +Mounting Hardware, inside through hole 3.3mm, height 14, Wuerth electronics 9774140960 (https://katalog.we-online.de/em/datasheet/9774140960.pdf,), generated with kicad-footprint-generator +Mounting 3.3mm 9774140960 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-3.3mm_H15mm_9774150960 +Mounting Hardware, inside through hole 3.3mm, height 15, Wuerth electronics 9774150960 (https://katalog.we-online.de/em/datasheet/9774150960.pdf,), generated with kicad-footprint-generator +Mounting 3.3mm 9774150960 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-4.5mm_H1mm_9774010982 +Mounting Hardware, inside through hole 4.5mm, height 1, Wuerth electronics 9774010982 (https://katalog.we-online.de/em/datasheet/9774010982.pdf), generated with kicad-footprint-generator +Mounting 4.5mm 9774010982 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-4.5mm_H2mm_9774020982 +Mounting Hardware, inside through hole 4.5mm, height 2, Wuerth electronics 9774020982 (https://katalog.we-online.de/em/datasheet/9774020982.pdf), generated with kicad-footprint-generator +Mounting 4.5mm 9774020982 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-4.5mm_H3mm_9774030982 +Mounting Hardware, inside through hole 4.5mm, height 3, Wuerth electronics 9774030982 (https://katalog.we-online.de/em/datasheet/9774030982.pdf), generated with kicad-footprint-generator +Mounting 4.5mm 9774030982 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-4.5mm_H4mm_9774040982 +Mounting Hardware, inside through hole 4.5mm, height 4, Wuerth electronics 9774040982 (https://katalog.we-online.de/em/datasheet/9774040982.pdf), generated with kicad-footprint-generator +Mounting 4.5mm 9774040982 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-4.5mm_H5mm_9774050982 +Mounting Hardware, inside through hole 4.5mm, height 5, Wuerth electronics 9774050982 (https://katalog.we-online.de/em/datasheet/9774050982.pdf), generated with kicad-footprint-generator +Mounting 4.5mm 9774050982 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-4.5mm_H6mm_9774060982 +Mounting Hardware, inside through hole 4.5mm, height 6, Wuerth electronics 9774060982 (https://katalog.we-online.de/em/datasheet/9774060982.pdf), generated with kicad-footprint-generator +Mounting 4.5mm 9774060982 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-4.5mm_H7mm_9774070982 +Mounting Hardware, inside through hole 4.5mm, height 7, Wuerth electronics 9774070982 (https://katalog.we-online.de/em/datasheet/9774070982.pdf), generated with kicad-footprint-generator +Mounting 4.5mm 9774070982 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-4.5mm_H8mm_9774080982 +Mounting Hardware, inside through hole 4.5mm, height 8, Wuerth electronics 9774080982 (https://katalog.we-online.de/em/datasheet/9774080982.pdf), generated with kicad-footprint-generator +Mounting 4.5mm 9774080982 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-4.5mm_H9mm_9774090982 +Mounting Hardware, inside through hole 4.5mm, height 9, Wuerth electronics 9774090982 (https://katalog.we-online.de/em/datasheet/9774090982.pdf), generated with kicad-footprint-generator +Mounting 4.5mm 9774090982 +0 +8 +1 +Mounting_Wuerth +Mounting_Wuerth_WA-SMST-4.5mm_H10mm_9774100982 +Mounting Hardware, inside through hole 4.5mm, height 10, Wuerth electronics 9774100982 (https://katalog.we-online.de/em/datasheet/9774100982.pdf), generated with kicad-footprint-generator +Mounting 4.5mm 9774100982 +0 +8 +1 +NetTie +NetTie-2_SMD_Pad0.5mm +Net tie, 2 pin, 0.5mm square SMD pads +net tie +0 +2 +2 +NetTie +NetTie-2_SMD_Pad2.0mm +Net tie, 2 pin, 2.0mm square SMD pads +net tie +0 +2 +2 +NetTie +NetTie-2_THT_Pad0.3mm +Net tie, 2 pin, 0.3mm round THT pads +net tie +0 +2 +2 +NetTie +NetTie-2_THT_Pad1.0mm +Net tie, 2 pin, 1.0mm round THT pads +net tie +0 +2 +2 +NetTie +NetTie-3_SMD_Pad0.5mm +Net tie, 3 pin, 0.5mm square SMD pads +net tie +0 +3 +3 +NetTie +NetTie-3_SMD_Pad2.0mm +Net tie, 3 pin, 2.0mm square SMD pads +net tie +0 +3 +3 +NetTie +NetTie-3_THT_Pad0.3mm +Net tie, 3 pin, 0.3mm round THT pads +net tie +0 +3 +3 +NetTie +NetTie-3_THT_Pad1.0mm +Net tie, 3 pin, 1.0mm round THT pads +net tie +0 +3 +3 +NetTie +NetTie-4_SMD_Pad0.5mm +Net tie, 4 pin, 0.5mm square SMD pads +net tie +0 +4 +4 +NetTie +NetTie-4_SMD_Pad2.0mm +Net tie, 4 pin, 2.0mm square SMD pads +net tie +0 +4 +4 +NetTie +NetTie-4_THT_Pad0.3mm +Net tie, 4 pin, 0.3mm round THT pads +net tie +0 +4 +4 +NetTie +NetTie-4_THT_Pad1.0mm +Net tie, 4 pin, 1.0mm round THT pads +net tie +0 +4 +4 +OptoDevice +ADNS-9800 +Laser Gaming Sensor ADNS-9800 +MOUSE MOUSE_SENSOR LASER_GAMING_SENSOR +0 +16 +16 +OptoDevice +AGILENT_HFBR-152x +Fiberoptic Transmitter TX, HFBR series (https://docs.broadcom.com/docs/AV02-3283EN) +Fiberoptic Transmitter +0 +6 +6 +OptoDevice +AGILENT_HFBR-252x +Fiberoptic Receiver RX, HFBR series (https://docs.broadcom.com/docs/AV02-3283EN) +Fiberoptic Transmitter +0 +6 +6 +OptoDevice +AMS_TSL2550_SMD +http://ams.com/eng/content/download/250130/975613/142977 +TSL2550 ambient light sensor +0 +4 +4 +OptoDevice +Broadcom_AFBR-16xxZ_Horizontal +Fiber Optic Transmitter and Receiver, https://docs.broadcom.com/docs/AV02-4369EN +Fiber Optic Transmitter and Receiver +0 +6 +6 +OptoDevice +Broadcom_AFBR-16xxZ_Tilted +Fiber Optic Transmitter and Receiver, https://docs.broadcom.com/docs/AV02-4369EN +Fiber Optic Transmitter and Receiver +0 +6 +6 +OptoDevice +Broadcom_AFBR-16xxZ_Vertical +Fiber Optic Transmitter and Receiver, https://docs.broadcom.com/docs/AV02-4369EN +Fiber Optic Transmitter and Receiver +0 +6 +6 +OptoDevice +Broadcom_APDS-9301 +ambient light sensor, i2c interface, 6-pin chipled package, https://docs.broadcom.com/docs/AV02-2315EN +ambient light sensor chipled +0 +6 +6 +OptoDevice +Broadcom_DFN-6_2x2mm_P0.65mm +Broadcom DFN, 6 Pin (https://docs.broadcom.com/docs/AV02-4755EN), generated with kicad-footprint-generator ipc_noLead_generator.py +Broadcom DFN NoLead +0 +6 +6 +OptoDevice +Broadcom_LGA-8_2x2mm_P0.5mm +Broadcom LGA, 8 Pin (https://docs.broadcom.com/doc/APDS-9251-001-DS#page=19), generated with kicad-footprint-generator ipc_noLead_generator.py +Broadcom LGA NoLead +0 +8 +8 +OptoDevice +Broadcom_LGA-8_2x2mm_P0.53mm +Broadcom LGA, 8 Pin (https://docs.broadcom.com/docs/AV02-4755EN), generated with kicad-footprint-generator ipc_noLead_generator.py +Broadcom LGA NoLead +0 +8 +8 +OptoDevice +Everlight_ITR1201SR10AR +package for Everlight ITR1201SR10AR, light-direction upwards, see https://www.everlight.com/file/ProductFile/ITR1201SR10AR-TR.pdf +reflective opto couple photo coupler +0 +4 +4 +OptoDevice +Everlight_ITR8307 +package for Everlight ITR8307 with PCB cutout, light-direction upwards, see http://www.everlight.com/file/ProductFile/ITR8307.pdf +refective opto couple photo coupler +0 +4 +4 +OptoDevice +Everlight_ITR8307F43 +package for Everlight ITR8307/F43, see https://everlighteurope.com/index.php?controller=attachment&id_attachment=5385 +refective opto couple photo coupler +0 +4 +4 +OptoDevice +Everlight_ITR8307_Reverse +package for Everlight ITR8307 with PCB cutout, light-direction downwards, see http://www.everlight.com/file/ProductFile/ITR8307.pdf +refective opto couple photo coupler +0 +4 +4 +OptoDevice +Everlight_ITR9608-F +Fork-type photointerrupter (https://everlighteurope.com/index.php?controller=attachment&id_attachment=5389) +Photointerrupter infrared LED +0 +4 +4 +OptoDevice +Finder_34.81 +Relay SPST, Finder Type 34.81 (opto relays/coupler), vertical/standing form, see https://gfinder.findernet.com/public/attachments/34/EN/S34USAEN.pdf +Relay SPST Finder +0 +4 +4 +OptoDevice +Hamamatsu_C12880 +Hamamatsu spectrometer, see http://www.hamamatsu.com/resources/pdf/ssd/c12880ma_kacc1226e.pdf +opto spectrometer Hamamatsu +0 +10 +10 +OptoDevice +Hamamatsu_S13360-30CS +SiPM, 2pin +Hamamatsu SiPM +0 +2 +2 +OptoDevice +Kingbright_KPS-3227 +3.2mmx2.7mm, light sensor, https://www.kingbright.com/attachments/file/psearch/000/00/00/KPS-3227SP1C(Ver.16).pdf +KPS-3227 Ambient Light Photo Sensor +0 +4 +4 +OptoDevice +Kingbright_KPS-5130 +http://www.kingbright.com/attachments/file/psearch/000/00/00/KPS-5130PD7C(Ver.14).pdf +KPS-5130 photodiode RGB sensor +0 +4 +4 +OptoDevice +Kingbright_KRC011_Horizontal +Subminiature Reflective Optical Sensor, http://www.kingbright.com/attachments/file/psearch/000/00/00/KRC011(Ver.15).pdf +Subminiature Reflective Optical Sensor +0 +4 +4 +OptoDevice +Kingbright_KRC011_Vertical +Subminiature Reflective Optical Sensor, http://www.kingbright.com/attachments/file/psearch/000/00/00/KRC011(Ver.15).pdf +Subminiature Reflective Optical Sensor +0 +4 +4 +OptoDevice +Kodenshi_LG206D +http://kodenshi.co.jp/products/pdf/sensor/photointerrupter_ic/LG206D.pdf +Photointerrupter infrared LED with photo IC +0 +5 +5 +OptoDevice +Kodenshi_LG206L +http://kodenshi.co.jp/products/pdf/sensor/photointerrupter_ic/LG205L.pdf +Photointerrupter infrared LED with photo IC +0 +5 +5 +OptoDevice +Kodenshi_SG105 +package for Kodenshi SG-105 with PCB cutout, light-direction upwards, see http://www.kodenshi.co.jp/products/pdf/sensor/photointerrupter_ref/SG-105.pdf +refective opto couple photo coupler +0 +4 +4 +OptoDevice +Kodenshi_SG105F +package for Kodenshi SG-105F, see http://www.kodenshi.co.jp/products/pdf/sensor/photointerrupter_ref/SG-105F.pdf +refective opto couple photo coupler +0 +4 +4 +OptoDevice +Kodenshi_SG105_Reverse +package for Kodenshi SG-105 with PCB cutout, light-direction downwards, see http://www.kodenshi.co.jp/products/pdf/sensor/photointerrupter_ref/SG-105.pdf +refective opto couple photo coupler +0 +4 +4 +OptoDevice +LaserDiode_TO3.3-D3.3-3 +Laser Diode, TO-3.3mm, 3pin +Laser Diode TO3.3 +0 +3 +3 +OptoDevice +LaserDiode_TO5-D9-3 +Laser Diode, TO5-like (D=9mm), 3pin +Laser Diode TO5-like +0 +3 +3 +OptoDevice +LaserDiode_TO18-D5.6-3 +Laser Diode, TO18-like (D=5.6mm), 3pin +Laser Diode TO18-like +0 +3 +3 +OptoDevice +LaserDiode_TO38ICut-3 +Laser Diode, TO-38-ICut, 3pin +Laser Diode TO38-ICut +0 +3 +3 +OptoDevice +LaserDiode_TO56-3 +Laser Diode, TO-56, 3pin +Laser Diode TO56 +0 +3 +3 +OptoDevice +Lightpipe_Bivar_RLP1-400-650 +1-way, 2.8mm lightpipe, 10mm lens output height, 17mm protrusion, https://www.bivar.com/parts_content/Datasheets/RLP1-XXX-XXX.pdf +planar light pipe 1 way 3mm +0 +0 +0 +OptoDevice +Lightpipe_Bivar_SLP3-150-100-F +1-way, 3mm lightpipe, flat face, 3.8mm lens output height, 2.54mm protrusion, https://www.bivar.com/parts_content/Datasheets/SLP3-150-XXX-X.pdf +light pipe 1 way 3mm +0 +0 +0 +OptoDevice +Lightpipe_Bivar_SLP3-150-100-R +1-way, 3mm lightpipe, round face, 3.8mm lens output height, 2.54mm protrusion, https://www.bivar.com/parts_content/Datasheets/SLP3-150-XXX-X.pdf +light pipe 1 way 3mm +0 +0 +0 +OptoDevice +Lightpipe_Bivar_SLP3-150-150-F +1-way, 3mm lightpipe, flat face, 3.8mm lens output height, 3.81mm protrusion, https://www.bivar.com/parts_content/Datasheets/SLP3-150-XXX-X.pdf +light pipe 1 way 3mm +0 +0 +0 +OptoDevice +Lightpipe_Bivar_SLP3-150-150-R +1-way, 3mm lightpipe, round face, 3.8mm lens output height, 3.81mm protrusion, https://www.bivar.com/parts_content/Datasheets/SLP3-150-XXX-X.pdf +light pipe 1 way 3mm +0 +0 +0 +OptoDevice +Lightpipe_Bivar_SLP3-150-200-R +1-way, 3mm lightpipe, round face, 3.8mm lens output height, 5.08mm protrusion, https://www.bivar.com/parts_content/Datasheets/SLP3-150-XXX-X.pdf +light pipe 1 way 3mm +0 +0 +0 +OptoDevice +Lightpipe_Bivar_SLP3-150-250-F +1-way, 3mm lightpipe, flat face, 3.8mm lens output height, 6.35mm protrusion, https://www.bivar.com/parts_content/Datasheets/SLP3-150-XXX-X.pdf +light pipe 1 way 3mm +0 +0 +0 +OptoDevice +Lightpipe_Bivar_SLP3-150-250-R +1-way, 3mm lightpipe, round face, 3.8mm lens output height, 6.35mm protrusion, https://www.bivar.com/parts_content/Datasheets/SLP3-150-XXX-X.pdf +light pipe 1 way 3mm +0 +0 +0 +OptoDevice +Lightpipe_Bivar_SLP3-150-300-F +1-way, 3mm lightpipe, flat face, 3.8mm lens output height, 7.62mm protrusion, https://www.bivar.com/parts_content/Datasheets/SLP3-150-XXX-X.pdf +light pipe 1 way 3mm +0 +0 +0 +OptoDevice +Lightpipe_Bivar_SLP3-150-300-R +1-way, 3mm lightpipe, round face, 3.8mm lens output height, 7.62mm protrusion, https://www.bivar.com/parts_content/Datasheets/SLP3-150-XXX-X.pdf +light pipe 1 way 3mm +0 +0 +0 +OptoDevice +Lightpipe_Bivar_SLP3-150-450-R +1-way, 3mm lightpipe, round face, 3.8mm lens output height, 11.43mm protrusion, https://www.bivar.com/parts_content/Datasheets/SLP3-150-XXX-X.pdf +light pipe 1 way 3mm +0 +0 +0 +OptoDevice +Lightpipe_Dialight_515-1064F +https://www.dialightsignalsandcomponents.com/515-optopipe-light-pipe-trilevel-2-5mm-rnd-flat-diff-lens-press-fit/#tab-resources +lightpipe triple tower right angle 3mm +0 +0 +0 +OptoDevice +Lightpipe_LPF-C012303S +https://www.lumex.com/spec/LPF-C012303S.pdf +lightpipe dual tower right angle 3mm +0 +0 +0 +OptoDevice +Lightpipe_LPF-C013301S +https://www.lumex.com/spec/LPF-C013301S.pdf +lightpipe triple tower right angle 3mm +0 +0 +0 +OptoDevice +Lightpipe_Mentor_1275.x00x +https://www.mentor-bauelemente.de/katalog/ll/MENTOR-LL.pdf +spherical light pipe 4 way 3mm PLCC-2 PLCC-4 +0 +0 +0 +OptoDevice +Lightpipe_Mentor_1276.1004 +https://www.mentor-bauelemente.de/katalog/ll/MENTOR-LL.pdf +spherical light pipe 4 way 3mm PLCC-2 PLCC-4 +0 +0 +0 +OptoDevice +Lightpipe_Mentor_1276.2004 +https://www.mentor-bauelemente.de/katalog/ll/MENTOR-LL.pdf +planar light pipe 4 way 3mm PLCC-2 PLCC-4 +0 +0 +0 +OptoDevice +Lite-On_LTR-303ALS-01 +ambient light sensor, i2c interface, 6-pin chipled package, http://optoelectronics.liteon.com/upload/download/DS86-2013-0004/LTR-303ALS-01_DS_V1.pdf +ambient light sensor chipled +0 +6 +6 +OptoDevice +Luna_NSL-32 +Optoisolator with LED and photoresistor +optoisolator +0 +4 +4 +OptoDevice +Maxim_OLGA-14_3.3x5.6mm_P0.8mm +https://pdfserv.maximintegrated.com/land_patterns/90-0602.PDF +OLGA-14 OESIP-14 +0 +14 +14 +OptoDevice +ONSemi_QSE15x +3 Lead Plastic Package +ONSemi QSE158 QSE159 +0 +3 +3 +OptoDevice +OnSemi_CASE100AQ +OnSemi CASE 100AQ for QRE1113, see https://www.onsemi.com/pub/Collateral/QRE1113-D.PDF +reflective opto couple photo coupler +0 +4 +4 +OptoDevice +OnSemi_CASE100CY +OnSemi CASE 100CY, light-direction upwards, see http://www.onsemi.com/pub/Collateral/QRE1113-D.PDF +refective opto couple photo coupler +0 +4 +4 +OptoDevice +Osram_BP104-SMD +PhotoDiode, plastic SMD DIL, 4.5x4mm, area: 2.2x2.2mm, https://dammedia.osram.info/media/resource/hires/osram-dam-5989350/BP%20104%20FAS_EN.pdf +PhotoDiode plastic SMD DIL +0 +6 +2 +OptoDevice +Osram_BPW34S-SMD +PhotoDiode, plastic SMD DIL, 4.5x4mm, area: 2.65x2.65mm, https://dammedia.osram.info/media/resource/hires/osram-dam-5488319/BPW%2034%20S_EN.pdf +PhotoDiode plastic SMD DIL +0 +6 +2 +OptoDevice +Osram_BPW82 +PhotoDiode, BPW82, RM2.54 +PhotoDiode BPW82 RM2.54 +0 +2 +2 +OptoDevice +Osram_DIL2_4.3x4.65mm_P5.08mm +PhotoDiode, plastic DIL, 4.3x4.65mm², RM5.08 +PhotoDiode plastic DIL RM5.08 +0 +2 +2 +OptoDevice +Osram_LPT80A +PhotoTransistor, sidelooker package, RM2.54 +PhotoTransistor sidelooker package RM2.54 +0 +2 +2 +OptoDevice +Osram_SFH9x0x +package for Osram SFH9x0x series of reflective photo interrupters/couplers, see http://www.osram-os.com/Graphics/XPic6/00200860_0.pdf +reflective photo interrupter SMD +0 +6 +6 +OptoDevice +Osram_SFH205 +PhotoDiode, SFH205, RM2.54 +PhotoDiode SFH205 RM2.54 +0 +2 +2 +OptoDevice +Osram_SFH225 +PhotoDiode, SFH225, RM2.54 +PhotoDiode SFH225 RM2.54 +0 +2 +2 +OptoDevice +Osram_SFH2201 +PhotoDiode, Clear Silicone, Osram TOPLED, 4x5.09mm, area: 2.85x2.85mm, Orientation mark at cathode, https://dammedia.osram.info/media/resource/hires/osram-dam-25688470/SFH%202201%20A01_EN.pdf +PhotoDiode silicone +0 +6 +2 +OptoDevice +Osram_SFH2430 +PhotoDiode, plastic SMD DIL, 4.5x4mm, area: 2.65x2.65mm, https://dammedia.osram.info/media/resource/hires/osram-dam-5467144/SFH%202430_EN.pdf +PhotoDiode plastic SMD DIL +0 +6 +2 +OptoDevice +Osram_SFH2440 +PhotoDiode, plastic SMD DIL, 4.5x4mm, area: 2.65x2.65mm, https://dammedia.osram.info/media/resource/hires/osram-dam-5467146/SFH%202440_EN.pdf +PhotoDiode plastic SMD DIL +0 +6 +2 +OptoDevice +Osram_SFH3710 +Osram SHF3710 NPN phototransistor, SMD Chip LED package, 2.0 x 1.25mm, height 0.85mm, https://look.ams-osram.com/m/14a91a7e00106d22/original/SFH-3710.pdf +phototransistor npn +0 +2 +2 +OptoDevice +Osram_SMD-SmartDIL +PhotoDiode, plastic SMD SmatDIL +PhotoDiode plastic SMD SmatDIL +0 +3 +3 +OptoDevice +Panasonic_APV-AQY_SSOP-4_4.45x2.65mm_P1.27mm +https://www.panasonic-electric-works.com/cps/rde/xbcr/pew_eu_en/technical_information_photomos_en.pdf +SSOP4 APV21 AQY22 +0 +4 +4 +OptoDevice +PerkinElmer_VTL5C +Axial Vactrol (http://www.qsl.net/wa1ion/vactrol/vactrol.pdf) +vactrol +0 +4 +4 +OptoDevice +PerkinElmer_VTL5Cx2 +Axial Vactrol (http://www.qsl.net/wa1ion/vactrol/vactrol.pdf) +vactrol +0 +5 +5 +OptoDevice +R_LDR_4.9x4.2mm_P2.54mm_Vertical +Resistor, LDR 4.9x4.2mm +Resistor LDR4.9x4.2 +0 +2 +2 +OptoDevice +R_LDR_5.0x4.1mm_P3mm_Vertical +Resistor, LDR 5x4.1mm, see http://cdn-reichelt.de/documents/datenblatt/A500/A90xxxx%23PE.pdf +Resistor LDR5x4.1mm +0 +2 +2 +OptoDevice +R_LDR_5.1x4.3mm_P3.4mm_Vertical +Resistor, LDR 5.1x3.4mm, see http://yourduino.com/docs/Photoresistor-5516-datasheet.pdf +Resistor LDR5.1x3.4mm +0 +2 +2 +OptoDevice +R_LDR_5.2x5.2mm_P3.5mm_Horizontal +Resistor, LDR 5.2x5.2, upright, see http://cdn-reichelt.de/documents/datenblatt/A500/M996011A.pdf +Resistor LDR5.2x5.2 +0 +2 +2 +OptoDevice +R_LDR_7x6mm_P5.1mm_Vertical +Resistor, LDR 7x6mm +Resistor LDR7x6mm +0 +2 +2 +OptoDevice +R_LDR_10x8.5mm_P7.6mm_Vertical +Resistor, LDR 10x8.5mm +Resistor LDR10.8.5mm +0 +2 +2 +OptoDevice +R_LDR_11x9.4mm_P8.2mm_Vertical +Resistor, LDR 11x9.4mm +Resistor LDR11x9.4mm +0 +2 +2 +OptoDevice +R_LDR_12x10.8mm_P9.0mm_Vertical +Resistor, LDR 12x10.8mm, see http://yourduino.com/docs/Photoresistor-5516-datasheet.pdf +Resistor LDR12x10.8mm +0 +2 +2 +OptoDevice +R_LDR_D6.4mm_P3.4mm_Vertical +Resistor, LDR D=6.4mm, see http://yourduino.com/docs/Photoresistor-5516-datasheet.pdf +Resistor LDRD=6.4mm +0 +2 +2 +OptoDevice +R_LDR_D13.8mm_P9.0mm_Vertical +Resistor, diameter 13.8mm pitch 9mm, see http://yourduino.com/docs/Photoresistor-5516-datasheet.pdf +Resistor LDR +0 +2 +2 +OptoDevice +R_LDR_D20mm_P17.5mm_Vertical +Resistor, LDR 20mm diameter, pin pitch 17.5mm, see http://yourduino.com/docs/Photoresistor-5516-datasheet.pdf +Resistor LDR +0 +2 +2 +OptoDevice +Renesas_DFN-6_1.5x1.6mm_P0.5mm +DFN, 6 Pin (https://www.renesas.com/us/en/document/psc/package-drawing-hodfn-6pin-l615x16?language=en&r=568376) +DFN NoLead +0 +6 +6 +OptoDevice +ST_VL53L0X +https://www.st.com/resource/en/datasheet/vl53l1x.pdf +laser-ranging sensor +0 +12 +12 +OptoDevice +ST_VL53L1X +https://www.st.com/resource/en/datasheet/vl53l1x.pdf +laser-ranging sensor +0 +12 +12 +OptoDevice +Sharp_GP2Y0A41SK0F +http://www.sharp-world.com/products/device/lineup/data/pdf/datasheet/gp2y0a41sk_e.pdf +Distance Sensor Sharp +0 +2 +2 +OptoDevice +Sharp_IS471F +Sharp OPIC IS471F, see http://pdf.datasheetcatalog.com/datasheet/Sharp/mXvrzty.pdf +Sharp OPIC IS471F +0 +4 +4 +OptoDevice +Sharp_IS485 +Sharp OPIC, IS485, IS486, see http://microrato.ua.pt/main/Actividades/Estagios/Docs/IS485_6.pdf +Sharp OPIC IS485 IS486 +0 +3 +3 +OptoDevice +Siemens_SFH900 +package for Siemens SFH900 reflex photo interrupter/coupler/object detector, see https://www.batronix.com/pdf/sfh900.pdf +Siemens SFH900 reflex photo interrupter coupler object detector +0 +3 +3 +OptoDevice +Toshiba_TORX170_TORX173_TORX193_TORX194 +Fiberoptic Reciver, RX, Toshiba, Toslink, TORX170, TORX173, TORX193, TORX194 +Fiberoptic Reciver RX Toshiba Toslink TORX170 TORX173 TORX193 TORX194 +0 +6 +6 +OptoDevice +Toshiba_TOTX170_TOTX173_TOTX193_TOTX194 +Fiberoptic Reciver, RX, Toshiba, Toslink, TORX170, TORX173, TORX193, TORX194 +Fiberoptic Reciver RX Toshiba Toslink TORX170 TORX173 TORX193 TORX194 +0 +6 +6 +OptoDevice +Vishay_CAST-3Pin +IR Receiver Vishay TSOP-xxxx, CAST package, see https://www.vishay.com/docs/82493/tsop311.pdf +IRReceiverVishayTSOP-xxxx CAST +0 +3 +3 +OptoDevice +Vishay_CNY70 +package for Vishay CNY70 refective photo coupler/interrupter, https://www.vishay.com/docs/83751/cny70.pdf +Vishay CNY70 refective photo coupler +0 +4 +4 +OptoDevice +Vishay_MINICAST-3Pin +IR Receiver Vishay TSOP-xxxx, MINICAST package, see https://www.vishay.com/docs/82669/tsop32s40f.pdf +IR Receiver Vishay TSOP-xxxx MINICAST +0 +3 +3 +OptoDevice +Vishay_MINIMOLD-3Pin +IR Receiver Vishay TSOP-xxxx, MINIMOLD package, see https://www.vishay.com/docs/82742/tsop331.pdf +IR Receiver Vishay TSOP-xxxx MINIMOLD +0 +3 +3 +OptoDevice +Vishay_MOLD-3Pin +IR Receiver Vishay TSOP-xxxx, MOLD package, see https://www.vishay.com/docs/82669/tsop32s40f.pdf +IR Receiver Vishay TSOP-xxxx MOLD +0 +3 +3 +Oscillator +Oscillator_DIP-8 +Oscillator, DIP8,http://cdn-reichelt.de/documents/datenblatt/B400/OSZI.pdf +oscillator +0 +4 +4 +Oscillator +Oscillator_DIP-8_LargePads +Oscillator, DIP8, Large Pads, http://cdn-reichelt.de/documents/datenblatt/B400/OSZI.pdf +oscillator +0 +4 +4 +Oscillator +Oscillator_DIP-14 +Oscillator, DIP14, http://cdn-reichelt.de/documents/datenblatt/B400/OSZI.pdf +oscillator +0 +4 +4 +Oscillator +Oscillator_DIP-14_LargePads +Oscillator, DIP14, Large Pads, http://cdn-reichelt.de/documents/datenblatt/B400/OSZI.pdf +oscillator +0 +4 +4 +Oscillator +Oscillator_OCXO_Morion_MV267 +http://www.morion.com.ru/catalog_pdf/MV267.pdf +OCXO +0 +5 +5 +Oscillator +Oscillator_OCXO_Morion_MV317 +https://www.morion-us.com/catalog_pdf/mv317.pdf +OCXO +0 +5 +5 +Oscillator +Oscillator_SMD_Abracon_ABLNO +https://abracon.com/Precisiontiming/ABLNO.pdf +VCXO XO +0 +4 +4 +Oscillator +Oscillator_SMD_Abracon_ASCO-4Pin_1.6x1.2mm +Miniature Crystal Clock Oscillator Abracon ASCO series, https://abracon.com/Oscillators/ASCO.pdf, 1.6x1.2mm^2 package +SMD SMT crystal oscillator +0 +4 +4 +Oscillator +Oscillator_SMD_Abracon_ASDMB-4Pin_2.5x2.0mm +Miniature Crystal Clock Oscillator Abracon ASDMB series, 2.5x2.0mm package, http://www.abracon.com/Oscillators/ASDMB.pdf +SMD SMT crystal oscillator +0 +4 +4 +Oscillator +Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm +Miniature Crystal Clock Oscillator Abracon ASE series, http://www.abracon.com/Oscillators/ASEseries.pdf, 3.2x2.5mm^2 package +SMD SMT crystal oscillator +0 +4 +4 +Oscillator +Oscillator_SMD_Abracon_ASE-4Pin_3.2x2.5mm_HandSoldering +Miniature Crystal Clock Oscillator Abracon ASE series, http://www.abracon.com/Oscillators/ASEseries.pdf, hand-soldering, 3.2x2.5mm^2 package +SMD SMT crystal oscillator hand-soldering +0 +4 +4 +Oscillator +Oscillator_SMD_Abracon_ASV-4Pin_7.0x5.1mm +Miniature Crystal Clock Oscillator Abracon ASV series, http://www.abracon.com/Oscillators/ASV.pdf, 7.0x5.1mm^2 package +SMD SMT crystal oscillator +0 +4 +4 +Oscillator +Oscillator_SMD_Abracon_ASV-4Pin_7.0x5.1mm_HandSoldering +Miniature Crystal Clock Oscillator Abracon ASV series, http://www.abracon.com/Oscillators/ASV.pdf, hand-soldering, 7.0x5.1mm^2 package +SMD SMT crystal oscillator hand-soldering +0 +4 +4 +Oscillator +Oscillator_SMD_Diodes_FN-4Pin_7.0x5.0mm +FN Series Crystal Clock Oscillator (XO) (https://www.diodes.com/assets/Datasheets/FN_3-3V.pdf) +Oscillator Crystal SMD SMT +0 +4 +4 +Oscillator +Oscillator_SMD_ECS_2520MV-xxx-xx-4Pin_2.5x2.0mm +Miniature Crystal Clock Oscillator ECS 2520MV series, https://www.ecsxtal.com/store/pdf/ECS-2520MV.pdf +Miniature Crystal Clock Oscillator ECS 2520MV series SMD SMT HCMOS +0 +4 +4 +Oscillator +Oscillator_SMD_EuroQuartz_XO32-4Pin_3.2x2.5mm +Miniature Crystal Clock Oscillator EuroQuartz XO32 series, http://cdn-reichelt.de/documents/datenblatt/B400/XO32.pdf, 3.2x2.5mm^2 package +SMD SMT crystal oscillator +0 +4 +4 +Oscillator +Oscillator_SMD_EuroQuartz_XO32-4Pin_3.2x2.5mm_HandSoldering +Miniature Crystal Clock Oscillator EuroQuartz XO32 series, http://cdn-reichelt.de/documents/datenblatt/B400/XO32.pdf, hand-soldering, 3.2x2.5mm^2 package +SMD SMT crystal oscillator hand-soldering +0 +4 +4 +Oscillator +Oscillator_SMD_EuroQuartz_XO53-4Pin_5.0x3.2mm +Miniature Crystal Clock Oscillator EuroQuartz XO53 series, http://cdn-reichelt.de/documents/datenblatt/B400/XO53.pdf, 5.0x3.2mm^2 package +SMD SMT crystal oscillator +0 +4 +4 +Oscillator +Oscillator_SMD_EuroQuartz_XO53-4Pin_5.0x3.2mm_HandSoldering +Miniature Crystal Clock Oscillator EuroQuartz XO53 series, http://cdn-reichelt.de/documents/datenblatt/B400/XO53.pdf, hand-soldering, 5.0x3.2mm^2 package +SMD SMT crystal oscillator hand-soldering +0 +4 +4 +Oscillator +Oscillator_SMD_EuroQuartz_XO91-4Pin_7.0x5.0mm +Miniature Crystal Clock Oscillator EuroQuartz XO91 series, http://cdn-reichelt.de/documents/datenblatt/B400/XO91.pdf, 7.0x5.0mm^2 package +SMD SMT crystal oscillator +0 +4 +4 +Oscillator +Oscillator_SMD_EuroQuartz_XO91-4Pin_7.0x5.0mm_HandSoldering +Miniature Crystal Clock Oscillator EuroQuartz XO91 series, http://cdn-reichelt.de/documents/datenblatt/B400/XO91.pdf, hand-soldering, 7.0x5.0mm^2 package +SMD SMT crystal oscillator hand-soldering +0 +4 +4 +Oscillator +Oscillator_SMD_Fordahl_DFAS1-6Pin_14.8x9.1mm +Miniature Crystal Clock Oscillator TXCO Fordahl DFA S1-KHZ/LHZ, http://www.iqdfrequencyproducts.com/products/details/iqxo-70-11-30.pdf, 14.8x9.1mm^2 package +SMD SMT crystal oscillator +0 +6 +6 +Oscillator +Oscillator_SMD_Fordahl_DFAS2-4Pin_7.3x5.1mm +Mminiature Crystal Clock Oscillator TXCO Fordahl DFA S2-KS/LS/US, http://www.iqdfrequencyproducts.com/products/details/iqxo-70-11-30.pdf, 7.3x5.1mm^2 package +SMD SMT crystal oscillator +0 +4 +4 +Oscillator +Oscillator_SMD_Fordahl_DFAS2-4Pin_7.3x5.1mm_HandSoldering +Mminiature Crystal Clock Oscillator TXCO Fordahl DFA S2-KS/LS/US, http://www.iqdfrequencyproducts.com/products/details/iqxo-70-11-30.pdf, hand-soldering, 7.3x5.1mm^2 package +SMD SMT crystal oscillator hand-soldering +0 +4 +4 +Oscillator +Oscillator_SMD_Fordahl_DFAS3-4Pin_9.1x7.2mm +Miniature Crystal Clock Oscillator TXCO Fordahl DFA S3-KS/LS/US, http://www.iqdfrequencyproducts.com/products/details/iqxo-70-11-30.pdf, 9.1x7.2mm^2 package +SMD SMT crystal oscillator +0 +4 +4 +Oscillator +Oscillator_SMD_Fordahl_DFAS3-4Pin_9.1x7.2mm_HandSoldering +Miniature Crystal Clock Oscillator TXCO Fordahl DFA S3-KS/LS/US, http://www.iqdfrequencyproducts.com/products/details/iqxo-70-11-30.pdf, hand-soldering, 9.1x7.2mm^2 package +SMD SMT crystal oscillator hand-soldering +0 +4 +4 +Oscillator +Oscillator_SMD_Fordahl_DFAS7-4Pin_19.9x12.9mm +Miniature Crystal Clock Oscillator TXCO Fordahl DFA S7-K/L, http://www.iqdfrequencyproducts.com/products/details/iqxo-70-11-30.pdf, 19.9x12.9mm^2 package +SMD SMT crystal oscillator +0 +4 +4 +Oscillator +Oscillator_SMD_Fordahl_DFAS7-4Pin_19.9x12.9mm_HandSoldering +Miniature Crystal Clock Oscillator TXCO Fordahl DFA S7-K/L, http://www.iqdfrequencyproducts.com/products/details/iqxo-70-11-30.pdf, hand-soldering, 19.9x12.9mm^2 package +SMD SMT crystal oscillator hand-soldering +0 +4 +4 +Oscillator +Oscillator_SMD_Fordahl_DFAS11-4Pin_7.0x5.0mm +Miniature Crystal Clock Oscillator TXCO Fordahl DFA S11-OV/UOV, http://www.iqdfrequencyproducts.com/products/details/iqxo-70-11-30.pdf, 7.0x5.0mm^2 package +SMD SMT crystal oscillator +0 +4 +4 +Oscillator +Oscillator_SMD_Fordahl_DFAS11-4Pin_7.0x5.0mm_HandSoldering +Miniature Crystal Clock Oscillator TXCO Fordahl DFA S11-OV/UOV, http://www.iqdfrequencyproducts.com/products/details/iqxo-70-11-30.pdf, hand-soldering, 7.0x5.0mm^2 package +SMD SMT crystal oscillator hand-soldering +0 +4 +4 +Oscillator +Oscillator_SMD_Fordahl_DFAS15-4Pin_5.0x3.2mm +Ultraminiature Crystal Clock Oscillator TXCO Fordahl DFA S15-OV/UOV, http://www.iqdfrequencyproducts.com/products/details/iqxo-70-11-30.pdf, 5.0x3.2mm^2 package +SMD SMT crystal oscillator +0 +4 +4 +Oscillator +Oscillator_SMD_Fordahl_DFAS15-4Pin_5.0x3.2mm_HandSoldering +Ultraminiature Crystal Clock Oscillator TXCO Fordahl DFA S15-OV/UOV, http://www.iqdfrequencyproducts.com/products/details/iqxo-70-11-30.pdf, hand-soldering, 5.0x3.2mm^2 package +SMD SMT crystal oscillator hand-soldering +0 +4 +4 +Oscillator +Oscillator_SMD_Fox_FT5H_5.0x3.2mm +https://foxonline.com/wp-content/uploads/pdfs/T5HN_T5HV.pdf +Fox TXCO temperature compensated oscillator +0 +4 +4 +Oscillator +Oscillator_SMD_IDT_JS6-6_5.0x3.2mm_P1.27mm +SMD Crystal Oscillator IDT https://www.idt.com/document/dst/xu-family-datasheet#page=15, 5.0x3.2mm +SMD SMT crystal oscillator +0 +6 +6 +Oscillator +Oscillator_SMD_IDT_JU6-6_7.0x5.0mm_P2.54mm +SMD Crystal Oscillator IDT https://www.idt.com/document/dst/xu-family-datasheet#page=17, 7.0x5.0mm +SMD SMT crystal oscillator +0 +6 +6 +Oscillator +Oscillator_SMD_IQD_IQXO70-4Pin_7.5x5.0mm +IQD Crystal Clock Oscillator IQXO-70, http://www.iqdfrequencyproducts.com/products/details/iqxo-70-11-30.pdf, 7.5x5.0mm^2 package +SMD SMT crystal oscillator +0 +4 +4 +Oscillator +Oscillator_SMD_IQD_IQXO70-4Pin_7.5x5.0mm_HandSoldering +IQD Crystal Clock Oscillator IQXO-70, http://www.iqdfrequencyproducts.com/products/details/iqxo-70-11-30.pdf, hand-soldering, 7.5x5.0mm^2 package +SMD SMT crystal oscillator hand-soldering +0 +4 +4 +Oscillator +Oscillator_SMD_Kyocera_2520-6Pin_2.5x2.0mm +https://global.kyocera.com/prdct/electro/product/pdf/kt2520_e.pdf +2.5mm 2mm SMD +0 +6 +6 +Oscillator +Oscillator_SMD_Kyocera_KC2520Z-4Pin_2.5x2.0mm +https://global.kyocera.com/prdct/electro/product/pdf/clock_z_xz_e.pdf +2.5mm 2mm SMD +0 +4 +4 +Oscillator +Oscillator_SMD_OCXO_ConnorWinfield_OH300 +http://www.conwin.com/datasheets/cx/cx282.pdf +OCXO +0 +7 +7 +Oscillator +Oscillator_SMD_SI570_SI571_HandSoldering +SI570, SI571, Programmable oscillator, Standard +SI570 SI571 Programmable oscillator Standard +0 +8 +8 +Oscillator +Oscillator_SMD_SI570_SI571_Standard +SI570, SI571, Programmable oscillator, Standard +SI570 SI571 Programmable oscillator Standard +0 +8 +8 +Oscillator +Oscillator_SMD_SeikoEpson_SG210-4Pin_2.5x2.0mm +SMD Crystal Oscillator Seiko Epson SG-210 https://support.epson.biz/td/api/doc_check.php?mode=dl&lang=en&Parts=SG-210SED, 2.5x2.0mm^2 package +SMD SMT crystal oscillator +0 +4 +4 +Oscillator +Oscillator_SMD_SeikoEpson_SG210-4Pin_2.5x2.0mm_HandSoldering +SMD Crystal Oscillator Seiko Epson SG-210 https://support.epson.biz/td/api/doc_check.php?mode=dl&lang=en&Parts=SG-210SED, hand-soldering, 2.5x2.0mm^2 package +SMD SMT crystal oscillator hand-soldering +0 +4 +4 +Oscillator +Oscillator_SMD_SeikoEpson_SG3030CM +SMD Crystal Oscillator Seiko Epson SG-3030CM package +SMD SMT crystal oscillator +0 +4 +4 +Oscillator +Oscillator_SMD_SeikoEpson_SG8002CA-4Pin_7.0x5.0mm +SMD Crystal Oscillator Seiko Epson SG-8002CA https://support.epson.biz/td/api/doc_check.php?mode=dl&lang=en&Parts=SG-8002DC, 7.0x5.0mm^2 package +SMD SMT crystal oscillator +0 +4 +4 +Oscillator +Oscillator_SMD_SeikoEpson_SG8002CA-4Pin_7.0x5.0mm_HandSoldering +SMD Crystal Oscillator Seiko Epson SG-8002CA https://support.epson.biz/td/api/doc_check.php?mode=dl&lang=en&Parts=SG-8002DC, hand-soldering, 7.0x5.0mm^2 package +SMD SMT crystal oscillator hand-soldering +0 +4 +4 +Oscillator +Oscillator_SMD_SeikoEpson_SG8002CE-4Pin_3.2x2.5mm +SMD Crystal Oscillator Seiko Epson SG-8002CE https://support.epson.biz/td/api/doc_check.php?mode=dl&lang=en&Parts=SG-8002DC, 3.2x2.5mm^2 package +SMD SMT crystal oscillator +0 +4 +4 +Oscillator +Oscillator_SMD_SeikoEpson_SG8002CE-4Pin_3.2x2.5mm_HandSoldering +SMD Crystal Oscillator Seiko Epson SG-8002CE https://support.epson.biz/td/api/doc_check.php?mode=dl&lang=en&Parts=SG-8002DC, hand-soldering, 3.2x2.5mm^2 package +SMD SMT crystal oscillator hand-soldering +0 +4 +4 +Oscillator +Oscillator_SMD_SeikoEpson_SG8002JA-4Pin_14.0x8.7mm +SMD Crystal Oscillator Seiko Epson SG-8002JA https://support.epson.biz/td/api/doc_check.php?mode=dl&lang=en&Parts=SG-8002DC, 14.0x8.7mm^2 package +SMD SMT crystal oscillator +0 +4 +4 +Oscillator +Oscillator_SMD_SeikoEpson_SG8002JA-4Pin_14.0x8.7mm_HandSoldering +SMD Crystal Oscillator Seiko Epson SG-8002JA https://support.epson.biz/td/api/doc_check.php?mode=dl&lang=en&Parts=SG-8002DC, hand-soldering, 14.0x8.7mm^2 package +SMD SMT crystal oscillator hand-soldering +0 +4 +4 +Oscillator +Oscillator_SMD_SeikoEpson_SG8002JC-4Pin_10.5x5.0mm +SMD Crystal Oscillator Seiko Epson SG-8002JC https://support.epson.biz/td/api/doc_check.php?mode=dl&lang=en&Parts=SG-8002DC, 10.5x5.0mm^2 package +SMD SMT crystal oscillator +0 +4 +4 +Oscillator +Oscillator_SMD_SeikoEpson_SG8002JC-4Pin_10.5x5.0mm_HandSoldering +SMD Crystal Oscillator Seiko Epson SG-8002JC https://support.epson.biz/td/api/doc_check.php?mode=dl&lang=en&Parts=SG-8002DC, hand-soldering, 10.5x5.0mm^2 package +SMD SMT crystal oscillator hand-soldering +0 +4 +4 +Oscillator +Oscillator_SMD_SeikoEpson_SG8002LB-4Pin_5.0x3.2mm +SMD Crystal Oscillator Seiko Epson SG-8002LB https://support.epson.biz/td/api/doc_check.php?mode=dl&lang=en&Parts=SG-8002DC, 5.0x3.2mm^2 package +SMD SMT crystal oscillator +0 +4 +4 +Oscillator +Oscillator_SMD_SeikoEpson_SG8002LB-4Pin_5.0x3.2mm_HandSoldering +SMD Crystal Oscillator Seiko Epson SG-8002LB https://support.epson.biz/td/api/doc_check.php?mode=dl&lang=en&Parts=SG-8002DC, hand-soldering, 5.0x3.2mm^2 package +SMD SMT crystal oscillator hand-soldering +0 +4 +4 +Oscillator +Oscillator_SMD_SeikoEpson_TG2520SMN-xxx-xxxxxx-4Pin_2.5x2.0mm +Miniature Crystal Clock Oscillator TG2520 series, https://support.epson.biz/td/api/doc_check.php?dl=app_TG2520SMN&lang=en +Miniature Crystal Clock Oscillator TG2520 series SMD SMT +0 +4 +4 +Oscillator +Oscillator_SMD_SiTime_PQFD-6L_3.2x2.5mm +3.2x2.5mm, 6-pin QFN (https://www.sitime.com/datasheet/SiT9365 page 13) +SMD SMT mems oscillator +0 +6 +6 +Oscillator +Oscillator_SMD_SiTime_SiT9121-6Pin_3.2x2.5mm +3.2x2.5mm, 1-220MHz High Performance Differential Oscillator SiTime SiT9121 https://www.sitime.com/datasheet/SiT9121 +SMD SMT crystal oscillator +0 +6 +6 +Oscillator +Oscillator_SMD_Silicon_Labs_LGA-6_2.5x3.2mm_P1.25mm +Silicon_Labs LGA, 6 Pin (https://www.silabs.com/documents/public/data-sheets/si512-13.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +Silicon_Labs LGA NoLead +0 +6 +6 +Oscillator +Oscillator_SMD_TCXO_G158 +TCXO +TCXO +0 +4 +4 +Oscillator +Oscillator_SMD_TXC_7C-4Pin_5.0x3.2mm +Miniature Crystal Clock Oscillator TXC 7C series, http://www.txccorp.com/download/products/osc/7C_o.pdf, 5.0x3.2mm^2 package +SMD SMT crystal oscillator +0 +4 +4 +Oscillator +Oscillator_SMD_TXC_7C-4Pin_5.0x3.2mm_HandSoldering +Miniature Crystal Clock Oscillator TXC 7C series, http://www.txccorp.com/download/products/osc/7C_o.pdf, hand-soldering, 5.0x3.2mm^2 package +SMD SMT crystal oscillator hand-soldering +0 +4 +4 +Oscillator +Oscillator_SeikoEpson_SG-8002DB +14-lead dip package, row spacing 7.62 mm (300 mils) +DIL DIP PDIP 2.54mm 7.62mm 300mil +0 +4 +4 +Oscillator +Oscillator_SeikoEpson_SG-8002DC +8-lead dip package, row spacing 7.62 mm (300 mils) +DIL DIP PDIP 2.54mm 7.62mm 300mil +0 +4 +4 +Package_BGA +Alliance_TFBGA-54_8x8mm_Layout9x9_P0.8mm +Alliance TFBGA 54 pins, 8x8mm, 54 Ball, 9x9 Layout, 0.8mm Pitch, https://www.alliancememory.com/wp-content/uploads/pdf/dram/Alliance_Memory_64M-AS4C4M16SA-CI_v5.0_October_2018.pdf#page=54 +BGA 54 0.8 +0 +54 +54 +Package_BGA +Analog_BGA-28_4.0x6.25mm_Layout4x7_P0.8mm_Ball0.45mm_Pad0.4 +Analog BGA-28 4.0mm x 6.25mm package, pitch 0.4mm pad, based on https://www.analog.com/media/en/technical-documentation/data-sheets/8063fa.pdf +BGA 28 0.8 +0 +28 +28 +Package_BGA +Analog_BGA-49_6.25x6.25mm_Layout7x7_P0.8mm_Ball0.5mm_Pad0.4mm +Analog BGA-49, 6.25x6.25mm, 49 Ball, 7x7 Layout, 0.8mm Pitch, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-bga/05081600_0_bga49.pdf https://www.analog.com/media/en/technical-documentation/product-information/assembly-considerations-for-umodule-bga-lga-package.pdf +BGA 49 0.8 +0 +49 +49 +Package_BGA +Analog_BGA-209_9.5x16mm_Layout11x19_P0.8mm_Ball0.5mm_Pad0.4mm +Analog BGA-209 (Reference LTC DWG#05-08-1561 Rev B), 9.5x16.0mm, 209 Ball, 11x19 Layout, 0.8mm Pitch, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-bga/05081561_bga209.pdf +BGA 209 0.8 +0 +209 +209 +Package_BGA +BGA-9_1.6x1.6mm_Layout3x3_P0.5mm +BGA-9, http://www.ti.com/lit/ds/symlink/bq27421-g1.pdf +BGA-9 +0 +9 +9 +Package_BGA +BGA-16_1.92x1.92mm_Layout4x4_P0.5mm +BGA-16, http://www.st.com/content/ccc/resource/technical/document/datasheet/group2/bc/cd/62/9e/8f/30/47/69/CD00151267/files/CD00151267.pdf/jcr:content/translations/en.CD00151267.pdf +BGA-16 +0 +16 +16 +Package_BGA +BGA-25_6.35x6.35mm_Layout5x5_P1.27mm +BGA-25, http://cds.linear.com/docs/en/datasheet/4624fc.pdf +BGA-25 uModule +0 +25 +25 +Package_BGA +BGA-36_3.396x3.466mm_Layout6x6_P0.4mm_Ball0.25mm_Pad0.2mm_NSMD +Altera V36, https://www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/packaging/04r00486-00.pdf +Altera BGA-36 V36 VBGA +0 +36 +36 +Package_BGA +BGA-48_8.0x9.0mm_Layout6x8_P0.8mm +BGA-48 - pitch 0.8 mm +BGA-48 +0 +48 +48 +Package_BGA +BGA-64_9.0x9.0mm_Layout10x10_P0.8mm +BGA-64, 10x10 raster, 9x9mm package, pitch 0.8mm +BGA-64 +0 +64 +64 +Package_BGA +BGA-68_5.0x5.0mm_Layout9x9_P0.5mm_Ball0.3mm_Pad0.25mm_NSMD +Altera MBGA-68, https://www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/packaging/04r00344-01.pdf +Altera BGA-68 M68 MBGA +0 +68 +68 +Package_BGA +BGA-81_4.496x4.377mm_Layout9x9_P0.4mm_Ball0.25mm_Pad0.2mm_NSMD +Altera V81, https://www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/packaging/04r00478-01.pdf +Altera VBGA V81 BGA-81 +0 +81 +81 +Package_BGA +BGA-90_8.0x13.0mm_Layout2x3x15_P0.8mm +BGA-90, http://www.issi.com/WW/pdf/42-45S32800J.pdf +BGA-90 +0 +90 +90 +Package_BGA +BGA-96_9.0x13.0mm_Layout2x3x16_P0.8mm +BGA-96, http://www.mouser.com/ds/2/198/43-46TR16640B-81280BL-706483.pdf +BGA-96 +0 +96 +96 +Package_BGA +BGA-100_6.0x6.0mm_Layout11x11_P0.5mm_Ball0.3mm_Pad0.25mm_NSMD +Altera MBGA-100, https://www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/packaging/04r00345-01.pdf +Altera BGA-100 M100 MBGA +0 +100 +100 +Package_BGA +BGA-100_11.0x11.0mm_Layout10x10_P1.0mm_Ball0.5mm_Pad0.4mm_NSMD +BGA-100, https://www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/packaging/04r00223-02.pdf +BGA-100 +0 +100 +100 +Package_BGA +BGA-121_9.0x9.0mm_Layout11x11_P0.8mm_Ball0.4mm_Pad0.35mm_NSMD +121-ball, 0.8mm BGA (based on http://www.latticesemi.com/view_document?document_id=213) +BGA 0.8mm 9mm 121 +0 +121 +121 +Package_BGA +BGA-121_12.0x12.0mm_Layout11x11_P1.0mm +BGA-121, http://cds.linear.com/docs/en/packaging/05081891_A_bga121.pdf +BGA-121 +0 +121 +121 +Package_BGA +BGA-132_12x18mm_Layout11x17_P1.0mm +BGA-132 11x17 12x18mm 1.0pitch +BGA-132 +0 +132 +132 +Package_BGA +BGA-144_7.0x7.0mm_Layout13x13_P0.5mm_Ball0.3mm_Pad0.25mm_NSMD +Altera MBGA-144, https://www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/packaging/04r00346-00.pdf +Altera BGA-144 M144 MBGA +0 +144 +144 +Package_BGA +BGA-144_13.0x13.0mm_Layout12x12_P1.0mm +BGA-144, http://www.topline.tv/drawings/pdf/BGA%201,0mm%20pitch/LBGA144T1.0-DC128.pdf +BGA-144 +0 +144 +144 +Package_BGA +BGA-152_14x18mm_Layout13x17_P0.5mm +BGA-152_14x18mm_Layout13x17_P0.5mm +VBGA-152 +0 +152 +152 +Package_BGA +BGA-153_8.0x8.0mm_Layout15x15_P0.5mm_Ball0.3mm_Pad0.25mm_NSMD +Altera MBGA-153, https://www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/packaging/04r00471-00.pdf +Altera BGA-153 M153 MBGA +0 +153 +153 +Package_BGA +BGA-169_11.0x11.0mm_Layout13x13_P0.8mm_Ball0.5mm_Pad0.4mm_NSMD +Altera U169, https://www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/packaging/04r00470-01.pdf +Altera UBGA U169 BGA-169 +0 +169 +169 +Package_BGA +BGA-200_10.0x14.5mm_Layout12x22_P0.80x0.65mm +BGA-200, 14.5x10.0mm, 200 Ball, 12x22 Layout, 0.8x0.65mm Pitch, http://www.issi.com/WW/pdf/43-46LQ32256A-AL.pdf +BGA 200 0.8x0.65 +0 +200 +200 +Package_BGA +BGA-256_11.0x11.0mm_Layout20x20_P0.5mm_Ball0.3mm_Pad0.25mm_NSMD +Altera MBGA-256, https://www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/packaging/04r00348-01.pdf +Altera BGA-256 M256 MBGA +0 +256 +256 +Package_BGA +BGA-256_14.0x14.0mm_Layout16x16_P0.8mm_Ball0.45mm_Pad0.32mm_NSMD +BGA-256, dimensions: https://www.xilinx.com/support/documentation/package_specs/ft256.pdf, design rules: https://www.xilinx.com/support/documentation/user_guides/ug1099-bga-device-design-rules.pdf +BGA-256 +0 +256 +256 +Package_BGA +BGA-256_17.0x17.0mm_Layout16x16_P1.0mm_Ball0.5mm_Pad0.4mm_NSMD +BGA-256, dimensions: https://www.xilinx.com/support/documentation/package_specs/ft256.pdf, design rules: https://www.xilinx.com/support/documentation/user_guides/ug1099-bga-device-design-rules.pdf +BGA-256 +0 +256 +256 +Package_BGA +BGA-324_15.0x15.0mm_Layout18x18_P0.8mm_Ball0.5mm_Pad0.4mm_NSMD +Altera U324, https://www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/packaging/04r00474-02.pdf +Altera UBGA U324 BGA-324 +0 +324 +324 +Package_BGA +BGA-324_15.0x15.0mm_Layout18x18_P0.8mm_Ball0.45mm_Pad0.4mm_NSMD +BGA-324, 15x15mm, 324 Ball, 18x18 Layout, 0.8mm Pitch, https://colognechip.com/docs/ds1001-gatemate1-datasheet-2022-05.pdf#page=92 +BGA 324 0.8 GateMate FPGA +0 +324 +324 +Package_BGA +BGA-324_19.0x19.0mm_Layout18x18_P1.0mm_Ball0.5mm_Pad0.4mm_NSMD +BGA-324, https://www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/packaging/04r00233-03.pdf +BGA-324 +0 +324 +324 +Package_BGA +BGA-352_35.0x35.0mm_Layout26x26_P1.27mm +BGA-352, https://www.fujitsu.com/downloads/MICRO/fma/pdfmcu/b352p05.pdf +BGA-352 +0 +352 +352 +Package_BGA +BGA-400_21.0x21.0mm_Layout20x20_P1.0mm +BGA-400, https://www.xilinx.com/support/documentation/package_specs/fg400.pdf +BGA-400 +0 +400 +400 +Package_BGA +BGA-484_23.0x23.0mm_Layout22x22_P1.0mm +BGA-484, https://www.xilinx.com/support/documentation/package_specs/fg484.pdf +BGA-484 +0 +484 +484 +Package_BGA +BGA-529_19x19mm_Layout23x23_P0.8mm +BGA-529, NSMD, 19.0x19.0mm, 529 Ball, 23x23 Layout, 0.8mm Pitch, https://www.efinixinc.com/docs/titanium-packaging-ug-v5.2.pdf +BGA 529 0.8 529-ball FBGA +0 +529 +529 +Package_BGA +BGA-624_21.0x21.0mm_Layout25x25_P0.8mm +BGA-624, 25x25 grid, 21x21mm package, pitch 0.8mm; https://www.nxp.com/docs/en/package-information/SOT1529-1.pdf +BGA 624 0.8 +0 +624 +624 +Package_BGA +BGA-625_21.0x21.0mm_Layout25x25_P0.8mm +BGA-625 +BGA-625 +0 +625 +625 +Package_BGA +BGA-672_27.0x27.0mm_Layout26x26_P1.0mm_Ball0.6mm_Pad0.5mm_NSMD +Altera BGA-672, https://www.altera.com/content/dam/altera-www/global/en_US/pdfs/literature/packaging/04r00472-00.pdf +Altera BGA-672 F672 FBGA +0 +672 +672 +Package_BGA +BGA-676_27.0x27.0mm_Layout26x26_P1.0mm_Ball0.6mm_Pad0.5mm_NSMD +XILINX BGA-676, https://www.xilinx.com/support/documentation/package_specs/fg676.pdf +XILINX BGA-676 FG676/FGG676 +0 +676 +676 +Package_BGA +BGA-1023_33.0x33.0mm_Layout32x32_P1.0mm +BGA-1023 +BGA-1023 +0 +1023 +1023 +Package_BGA +BGA-1156_35.0x35.0mm_Layout34x34_P1.0mm +BGA-1156 +BGA-1156 +0 +1156 +1156 +Package_BGA +BGA-1295_37.5x37.5mm_Layout36x36_P1.0mm +BGA-1295 +BGA-1295 +0 +1295 +1295 +Package_BGA +FB-BGA-484_23.0x23.0mm_Layout22x22_P1.0mm +Xilinx FB-484, https://www.xilinx.com/support/documentation/user_guides/ug1099-bga-device-design-rules.pdf +FB-BGA-484 +0 +484 +484 +Package_BGA +FBGA-78_7.5x11mm_Layout2x3x13_P0.8mm +FBGA-78, https://www.skhynix.com/product/filedata/fileDownload.do?seq=7687 +FBGA-78 +0 +78 +78 +Package_BGA +Fujitsu_WLP-15_2.28x3.092mm_Layout3x5_P0.4mm +WLP-15, 3x5 raster, 2.28x3.092mm package, pitch 0.4mm; http://www.fujitsu.com/global/documents/products/devices/semiconductor/fram/lineup/MB85RS1MT-DS501-00022-7v0-E.pdf +BGA 8 0.4 +0 +8 +8 +Package_BGA +Infineon_LFBGA-292_17x17mm_Layout20x20_P0.8mm_Ball0.5mm_Pad0.35 +Infineon LFBGA-292, 0.35mm pad, 17.0x17.0mm, 292 Ball, 20x20 Layout, 0.8mm Pitch, https://www.infineon.com/cms/en/product/packages/PG-LFBGA/PG-LFBGA-292-11/ +BGA 292 0.8 +0 +292 +292 +Package_BGA +LFBGA-100_10x10mm_Layout10x10_P0.8mm +LFBGA-100, 10x10 raster, 10x10mm package, pitch 0.8mm; see section 6.3 of http://www.st.com/resource/en/datasheet/stm32f103tb.pdf +BGA 100 0.8 +0 +100 +100 +Package_BGA +LFBGA-144_10x10mm_Layout12x12_P0.8mm +LFBGA-144, 12x12 raster, 10x10mm package, pitch 0.8mm; see section 6.1 of http://www.st.com/resource/en/datasheet/stm32f103ze.pdf +BGA 144 0.8 +0 +144 +144 +Package_BGA +LFBGA-169_16x12mm_Layout28x14_P0.5mm_Ball0.3_Pad0.3mm_NSMD +https://4donline.ihs.com/images/VipMasterIC/IC/SGST/SGSTS20279/SGSTS20279-1.pdf?hkey=EF798316E3902B6ED9A73243A3159BB0 +eMMC Flash LFBGA169 +0 +169 +169 +Package_BGA +LFBGA-400_16x16mm_Layout20x20_P0.8mm +LFBGA-400, NSMD, 16.0x16.0mm, 400 Ball, 20x20 Layout, 0.8mm Pitch, https://www.efinixinc.com/docs/titanium-packaging-ug-v5.2.pdf +BGA 400 0.8 400-ball FBGA +0 +400 +400 +Package_BGA +LFBGA-484_18x18mm_Layout22x22_P0.8mm +LFBGA-484, NSMD, 18.0x18.0mm, 484 Ball, 22x22 Layout, 0.8mm Pitch, https://www.efinixinc.com/docs/titanium-packaging-ug-v5.2.pdf +BGA 484 0.8 484-ball LFBGA +0 +484 +484 +Package_BGA +Lattice_caBGA-381_17.0x17.0mm_Layout20x20_P0.8mm_Ball0.4mm_Pad0.4mm_NSMD +Lattice caBGA-381 footprint for ECP5 FPGAs, based on http://www.latticesemi.com/view_document?document_id=213 +BGA 381 0.8 +0 +381 +381 +Package_BGA +Lattice_caBGA-381_17.0x17.0mm_Layout20x20_P0.8mm_Ball0.4mm_Pad0.6mm_SMD +Lattice caBGA-381 footprint for ECP5 FPGAs, based on http://www.latticesemi.com/view_document?document_id=213 +BGA 381 0.8 +0 +381 +381 +Package_BGA +Lattice_caBGA-756_27.0x27.0mm_Layout32x32_P0.8mm +Lattice caBGA-756, ECP5 FPGAs, 27.0x27.0mm, 756 Ball, 32x32 Layout, 0.8mm Pitch, http://www.latticesemi.com/view_document?document_id=213 +BGA 756 0.8 +0 +756 +756 +Package_BGA +Linear_BGA-133_15.0x15.0mm_Layout12x12_P1.27mm +Analog Devices (Linear Tech), 133-pin BGA uModule, 15.0x15.0x4.92mm, https://www.analog.com/media/en/technical-documentation/data-sheets/4637fc.pdf +133 pin bga +0 +134 +134 +Package_BGA +MAPBGA_9x9mm_Layout17x17_P0.5mm +MAPBGA 9x9x1.11 PKG, 9.0x9.0mm, 272 Ball, 17x17 Layout, 0.5mm Pitch, https://www.nxp.com/docs/en/package-information/98ASA00869D.pdf#page=1 +BGA 272 0.5 +0 +272 +272 +Package_BGA +MAPBGA_14x14mm_Layout17x17_P0.8mm +MAPBGA 14x14x1.18 PKG, 14.0x14.0mm, 289 Ball, 17x17 Layout, 0.8mm Pitch, https://www.nxp.com/docs/en/package-information/98ASA00855D.pdf#page=1 +BGA 289 0.8 +0 +289 +289 +Package_BGA +Maxim_WLP-9_1.595x1.415_Layout3x3_P0.4mm_Ball0.27mm_Pad0.25mm_NSMD +Maxim_WLP-9 W91C1+1 https://pdfserv.maximintegrated.com/package_dwgs/21-0459.PDF +Maxim_WLP-9 +0 +9 +9 +Package_BGA +Maxim_WLP-12 +Maxim_WLP-12 W121B2+1 http://pdfserv.maximintegrated.com/package_dwgs/21-0009.PDF +Maxim_WLP-12 +0 +12 +12 +Package_BGA +Maxim_WLP-12_1.608x2.008mm_Layout4x3_P0.4mm_Ball0.27mm_Pad0.25mm_NSMD +Maxim WLP-12, W121H2+1, 2.008x1.608mm, 12 Ball, 4x3 Layout, 0.4mm Pitch, https://pdfserv.maximintegrated.com/package_dwgs/21-100302.PDF, https://pdfserv.maximintegrated.com/package_dwgs/21-100302.PDF +BGA 12 0.4 +0 +12 +12 +Package_BGA +Microchip_TFBGA-196_11x11mm_Layout14x14_P0.75mm_SMD +TFBGA-196, 11.0x11.0mm, 196 Ball, 14x14 Layout, 0.75mm Pitch, http://ww1.microchip.com/downloads/en/DeviceDoc/SAMA5D2-Series-Data-Sheet-DS60001476C.pdf#page=2956 +BGA 196 0.75 +0 +196 +196 +Package_BGA +Micron_FBGA-78_7.5x10.6mm_Layout9x13_P0.8mm +FBGA-78, 10.6x7.5mm, 78 Ball, 9x13 Layout, 0.8mm Pitch, https://www.micron.com/-/media/client/global/documents/products/data-sheet/dram/ddr3/4gb_ddr3l.pdf#page=24 +BGA 78 0.8 +0 +78 +78 +Package_BGA +Micron_FBGA-78_8x10.5mm_Layout9x13_P0.8mm +FBGA-78, 10.5x8.0mm, 78 Ball, 9x13 Layout, 0.8mm Pitch, https://www.micron.com/-/media/client/global/documents/products/data-sheet/dram/ddr3/4gb_ddr3l.pdf#page=25 +BGA 78 0.8 +0 +78 +78 +Package_BGA +Micron_FBGA-78_9x10.5mm_Layout9x13_P0.8mm +FBGA-78, 10.5x9.0mm, 78 Ball, 9x13 Layout, 0.8mm Pitch, https://www.micron.com/-/media/client/global/documents/products/data-sheet/dram/ddr3/4gb_ddr3l.pdf#page=23 +BGA 78 0.8 +0 +78 +78 +Package_BGA +Micron_FBGA-96_7.5x13.5mm_Layout9x16_P0.8mm +FBGA-96, 13.5x7.5mm, 96 Ball, 9x16 Layout, 0.8mm Pitch, https://www.micron.com/-/media/client/global/documents/products/data-sheet/dram/ddr3/4gb_ddr3l.pdf#page=27 +BGA 96 0.8 +0 +96 +96 +Package_BGA +Micron_FBGA-96_8x14mm_Layout9x16_P0.8mm +FBGA-96, 14.0x8.0mm, 96 Ball, 9x16 Layout, 0.8mm Pitch, https://www.micron.com/-/media/client/global/documents/products/data-sheet/dram/ddr3/4gb_ddr3l.pdf#page=28 +BGA 96 0.8 +0 +96 +96 +Package_BGA +Micron_FBGA-96_9x14mm_Layout9x16_P0.8mm +FBGA-96, 14.0x9.0mm, 96 Ball, 9x16 Layout, 0.8mm Pitch, https://www.micron.com/-/media/client/global/documents/products/data-sheet/dram/ddr3/4gb_ddr3l.pdf#page=26 +BGA 96 0.8 +0 +96 +96 +Package_BGA +NXP_VFBGA-42_2.6x3mm_Layout6x7_P0.4mm_Ball0.25mm_Pad0.24mm +NXP VFBGA-42, 3.0x2.6mm, 42 Ball, 6x7 Layout, 0.4mm Pitch, https://www.nxp.com/docs/en/package-information/SOT1963-1.pdf +BGA 42 0.4 +0 +42 +42 +Package_BGA +ST_LFBGA-354_16x16mm_Layout19x19_P0.8mm +ST LFBGA-354, 16.0x16.0mm, 354 Ball, 19x19 Layout, 0.8mm Pitch, https://www.st.com/resource/en/datasheet/stm32mp151a.pdf +BGA 354 0.8 +0 +354 +354 +Package_BGA +ST_LFBGA-448_18x18mm_Layout22x22_P0.8mm +ST LFBGA-448, 18.0x18.0mm, 448 Ball, 22x22 Layout, 0.8mm Pitch, https://www.st.com/resource/en/datasheet/stm32mp151a.pdf +BGA 448 0.8 +0 +448 +448 +Package_BGA +ST_TFBGA-225_13x13mm_Layout15x15_P0.8mm +ST TFBGA-225, 13.0x13.0mm, 225 Ball, 15x15 Layout, 0.8mm Pitch, https://www.st.com/resource/en/datasheet/stm32h7b3ri.pdf +BGA 225 0.8 +0 +225 +225 +Package_BGA +ST_TFBGA-257_10x10mm_Layout19x19_P0.5mmP0.65mm +ST TFBGA-257, 10.0x10.0mm, 257 Ball, 19x19 Layout, 0.5mm Pitch, https://www.st.com/resource/en/datasheet/stm32mp151a.pdf +BGA 257 0.5 +0 +257 +257 +Package_BGA +ST_TFBGA-361_12x12mm_Layout23x23_P0.5mmP0.65mm +ST TFBGA-361, 12.0x12.0mm, 361 Ball, 23x23 Layout, 0.5mm Pitch, https://www.st.com/resource/en/datasheet/stm32mp151a.pdf +BGA 361 0.5 +0 +361 +361 +Package_BGA +ST_UFBGA-73_5x5mm_Layout9x9_P0.5mm +ST UFBGA-73, 5.0x5.0mm, 73 Ball, 9x9 Layout, 0.5mm Pitch, https://www.st.com/resource/en/datasheet/stm32wl54jc.pdf +BGA 73 0.5 +0 +73 +73 +Package_BGA +ST_UFBGA-121_6x6mm_Layout11x11_P0.5mm +ST UFBGA-121, 6.0x6.0mm, 121 Ball, 11x11 Layout, 0.5mm Pitch, https://www.st.com/resource/en/datasheet/stm32g473pb.pdf +BGA 121 0.5 +0 +121 +121 +Package_BGA +ST_UFBGA-129_7x7mm_Layout13x13_P0.5mm +ST UFBGA-129, 7.0x7.0mm, 129 Ball, 13x13 Layout, 0.5mm Pitch, https://www.st.com/resource/en/datasheet/stm32wb55vc.pdf +BGA 129 0.5 +0 +129 +129 +Package_BGA +ST_uTFBGA-36_3.6x3.6mm_Layout6x6_P0.5mm +ST uTFBGA-36, 0.25mm pad, 3.6x3.6mm, 36 Ball, 6x6 Layout, 0.5mm Pitch, https://www.st.com/resource/en/datasheet/stulpi01a.pdf +BGA 36 0.5 +0 +36 +36 +Package_BGA +TFBGA-64_5x5mm_Layout8x8_P0.5mm +TFBGA-64, 8x8 raster, 5x5mm package, pitch 0.5mm; see section 6.3 of http://www.st.com/resource/en/datasheet/stm32f100v8.pdf +BGA 64 0.5 +0 +64 +64 +Package_BGA +TFBGA-100_5.5x5.5mm_Layout10x10_P0.5mm +TFBGA-100, NSMD, 5.5x5.5mm, 100 Ball, 10x10 Layout, 0.5mm Pitch, https://www.efinixinc.com/docs/titanium-packaging-ug-v5.2.pdf +BGA 100 0.5 100-ball FBGA +0 +100 +100 +Package_BGA +TFBGA-100_8x8mm_Layout10x10_P0.8mm +TFBGA-100, 10x10 raster, 8x8mm package, pitch 0.8mm; see section 6.2 of http://www.st.com/resource/en/datasheet/stm32f746zg.pdf +BGA 100 0.8 +0 +100 +100 +Package_BGA +TFBGA-100_9.0x9.0mm_Layout10x10_P0.8mm +TFBGA-100, 10x10, 9x9mm package, pitch 0.8mm +TFBGA-100 +0 +100 +100 +Package_BGA +TFBGA-121_10x10mm_Layout11x11_P0.8mm +TFBGA-121, 11x11 raster, 10x10mm package, pitch 0.8mm; http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#p495 +BGA 121 0.8 +0 +121 +121 +Package_BGA +TFBGA-216_13x13mm_Layout15x15_P0.8mm +TFBGA-216, 15x15 raster, 13x13mm package, pitch 0.8mm; see section 6.8 of http://www.st.com/resource/en/datasheet/stm32f746zg.pdf +BGA 216 0.8 +0 +216 +216 +Package_BGA +TFBGA-225_10x10mm_Layout15x15_P0.65mm +TFBGA-225, NSMD, 10.0x10.0mm, 225 Ball, 15x15 Layout, 0.65mm Pitch, https://www.efinixinc.com/docs/titanium-packaging-ug-v5.2.pdf +BGA 225 0.65 225-ball FBGA +0 +225 +225 +Package_BGA +TFBGA-265_14x14mm_Layout17x17_P0.8mm +TFBGA-265, 17x17 raster, 14x14mm package, pitch 0.8mm; see section 7.8 of http://www.st.com/resource/en/datasheet/DM00387108.pdf +BGA 265 0.8 +0 +265 +265 +Package_BGA +TFBGA-361_13x13mm_Layout19x19_P0.65mm +TFBGA-361, NSMD, 13.0x13.0mm, 361 Ball, 19x19 Layout, 0.65mm Pitch, https://www.efinixinc.com/docs/titanium-packaging-ug-v5.2.pdf +BGA 361 0.65 361-ball FBGA +0 +361 +361 +Package_BGA +Texas_BGA-289_15.0x15.0mm_Layout17x17_P0.8mm_Ball0.5mm_Pad0.4mm +Texas Instruments BGA-289, 0.4mm pad, 15x15mm, 289 Ball, 17x17 Layout, 0.8mm Pitch, https://www.ti.com/lit/ml/mpbg777/mpbg777.pdf +BGA 289 0.8 ZAV S-PBGA-N289 +0 +289 +289 +Package_BGA +Texas_DSBGA-5_0.822x1.116mm_Layout2x1x2_P0.4mm +Texas Instruments, DSBGA, 0.822x1.116mm, 5 bump 2x1x2 array, NSMD pad definition (http://www.ti.com/lit/ds/symlink/opa330.pdf, http://www.ti.com/lit/an/snva009ag/snva009ag.pdf) +Texas Instruments DSBGA BGA YFF S-XBGA-N5 +0 +10 +5 +Package_BGA +Texas_DSBGA-5_0.8875x1.3875mm_Layout2x3_P0.5mm +Texas Instruments, DSBGA, area grid, NSMD, YZP0005 pad definition, 0.8875x1.3875mm, 5 Ball, 2x3 Layout, 0.5mm Pitch, https://www.ti.com/lit/ds/symlink/sn74lvc1g17.pdf#page=42, https://www.ti.com/lit/ml/mxbg018l/mxbg018l.pdf +BGA 5 0.5 YZP +0 +5 +5 +Package_BGA +Texas_DSBGA-6_0.9x1.4mm_Layout2x3_P0.5mm +Texas Instruments, DSBGA, 0.9x1.4mm, 6 bump 2x3 (perimeter) array, NSMD pad definition (http://www.ti.com/lit/ds/symlink/ts5a3159a.pdf) +Texas Instruments DSBGA BGA YZP R-XBGA-N6 +0 +12 +6 +Package_BGA +Texas_DSBGA-6_0.95x1.488mm_Layout2x3_P0.4mm +Texas Instruments, DSBGA, area grid, YBG pad definition, 0.95x1.488mm, 6 Ball, 2x3 Layout, 0.4mm Pitch, https://www.ti.com/lit/ml/mxbg419/mxbg419.pdf, https://www.ti.com/lit/ds/symlink/tmp117.pdf +BGA 6 0.4 +0 +6 +6 +Package_BGA +Texas_DSBGA-6_0.704x1.054mm_Layout2x3_P0.35mm +Texas Instruments, DSBGA-6, 0.704x1.054mm, NSMD, YKA pad definition, 0.704x1.054mm, 6 Ball, 2x3 Layout, 0.35mm Pitch, https://www.ti.com/lit/ml/mxbg383/mxbg383.pdf, https://www.ti.com/lit/ds/symlink/tps62800.pdf +BGA 6 0.35 +0 +6 +6 +Package_BGA +Texas_DSBGA-6_0.855x1.255mm_Layout2x3_P0.4mm_LevelB +Texas Instruments, DSBGA, area grid, YBG pad definition, 0.95x1.488mm, 6 Ball, 2x3 Layout, 0.4mm Pitch, YFF0006, NSMD pad definition, https://www.ti.com/lit/ds/symlink/lmg1020.pdf, https://www.ti.com/lit/ml/mxbg078z/mxbg078z.pdf +BGA 6 0.4 YFF0006 +0 +6 +6 +Package_BGA +Texas_DSBGA-6_0.855x1.255mm_Layout2x3_P0.4mm_LevelC +Texas Instruments, DSBGA, area grid, YBG pad definition, 0.95x1.488mm, 6 Ball, 2x3 Layout, 0.4mm Pitch, YFF0006, NSMD pad definition, https://www.ti.com/lit/ds/symlink/lmg1020.pdf, https://www.ti.com/lit/ml/mxbg078z/mxbg078z.pdf +BGA 6 0.4 YFF0006 +0 +6 +6 +Package_BGA +Texas_DSBGA-8_0.9x1.9mm_Layout2x4_P0.5mm +Texas Instruments, DSBGA, 0.9x1.9mm, 8 bump 2x4 (perimeter) array, NSMD pad definition (http://www.ti.com/lit/ds/symlink/txb0102.pdf, http://www.ti.com/lit/an/snva009ag/snva009ag.pdf) +Texas Instruments DSBGA BGA YZP R-XBGA-N8 +0 +16 +8 +Package_BGA +Texas_DSBGA-8_0.705x1.468mm_Layout2x4_P0.4mm +Texas Instruments, DSBGA, area grid, YBJ0008 pad definition, 1.468x0.705mm, 8 Ball, 2x4 Layout, 0.4mm Pitch, https://www.ti.com/lit/gpn/ina234 +BGA 8 0.4 +0 +8 +8 +Package_BGA +Texas_DSBGA-8_1.43x1.41mm_Layout3x3_P0.5mm +Texas Instruments, DSBGA, 1.43x1.41mm, 8 bump 3x3 (perimeter) array, NSMD pad definition (http://www.ti.com/lit/ds/symlink/lmc555.pdf, http://www.ti.com/lit/an/snva009ag/snva009ag.pdf) +Texas Instruments DSBGA BGA YZP R-XBGA-N8 +0 +16 +8 +Package_BGA +Texas_DSBGA-8_1.5195x1.5195mm_Layout3x3_P0.5mm +Texas Instruments, DSBGA, 1.5195x1.5195x0.600mm, 8 ball 3x3 area grid, YZR pad definition (http://www.ti.com/lit/ml/mxbg270/mxbg270.pdf) +BGA 8 0.5 +0 +8 +8 +Package_BGA +Texas_DSBGA-9_1.4715x1.4715mm_Layout3x3_P0.5mm +Texas Instruments, DSBGA, 1.4715x1.4715mm, 9 bump 3x3 array, NSMD pad definition (http://www.ti.com/lit/ds/symlink/lm4990.pdf, http://www.ti.com/lit/an/snva009ag/snva009ag.pdf) +Texas Instruments DSBGA BGA YZR0009 +0 +18 +9 +Package_BGA +Texas_DSBGA-10_1.36x1.86mm_Layout3x4_P0.5mm +Texas Instruments, DSBGA, area grid, YZP, YZP0010, 1.86x1.36mm, 10 Ball, 3x4 Layout, 0.5mm Pitch, http://www.ti.com/lit/ds/symlink/ts3a24159.pdf +BGA 10 0.5 +0 +20 +10 +Package_BGA +Texas_DSBGA-12_1.36x1.86mm_Layout3x4_P0.5mm +Texas Instruments, DSBGA, area grid, YZT, 1.86x1.36mm, 12 Ball, 3x4 Layout, 0.5mm Pitch, http://www.ti.com/lit/ds/symlink/txb0104.pdf, http://www.ti.com/lit/an/snva009ag/snva009ag.pdf +BGA 12 0.5 R-XBGA-N12 +0 +24 +12 +Package_BGA +Texas_DSBGA-16_2.39x2.39mm_Layout4x4_P0.5mm +Texas Instruments, DSBGA, area grid, YZF, YZF0016, 2.39x2.39mm, 16 Ball, 4x4 Layout, 0.5mm Pitch, https://www.ti.com/lit/ds/symlink/dac80508.pdf +BGA 16 0.5 +0 +32 +16 +Package_BGA +Texas_DSBGA-28_1.9x3.0mm_Layout4x7_P0.4mm +Texas Instruments, DSBGA, 3.0x1.9x0.625mm, 28 ball 7x4 area grid, NSMD pad definition (http://www.ti.com/lit/ds/symlink/bq51050b.pdf, http://www.ti.com/lit/an/snva009ag/snva009ag.pdf) +BGA 28 0.4 +0 +28 +28 +Package_BGA +Texas_DSBGA-49_3.33x3.488mm_Layout7x7_P0.4mm +Texas Instruments, DSBGA, 3.33x3.488x0.625mm, 49 ball 7x7 area grid, NSMD pad definition (http://www.ti.com/lit/ds/symlink/msp430f2234.pdf, http://www.ti.com/lit/an/snva009ag/snva009ag.pdf) +texas dsbga 49 +0 +49 +49 +Package_BGA +Texas_DSBGA-64_3.415x3.535mm_Layout8x8_P0.4mm +Texas Instruments, DSBGA, 3.415x3.535x0.625mm, 64 ball 8x8 area grid, NSMD pad definition (http://www.ti.com/lit/ds/slas718g/slas718g.pdf, http://www.ti.com/lit/an/snva009ag/snva009ag.pdf) +texas dsbga 64 +0 +64 +64 +Package_BGA +Texas_MicroStar_Junior_BGA-12_2.0x2.5mm_Layout4x3_P0.5mm +Texas Instruments, BGA Microstar Junior, 2x2.5mm, 12 bump 4x3 grid, NSMD pad definition (http://www.ti.com/lit/ds/symlink/txb0104.pdf, http://www.ti.com/lit/wp/ssyz015b/ssyz015b.pdf) +Texas_Junior_BGA-12 +0 +12 +12 +Package_BGA +Texas_MicroStar_Junior_BGA-80_5.0x5.0mm_Layout9x9_P0.5mm +Texas Instruments, BGA Microstar Junior, 5x5mm, 80 ball 9x9 grid, NSMD pad definition (http://www.ti.com/lit/ds/symlink/tlv320aic23b.pdf, http://www.ti.com/lit/wp/ssyz015b/ssyz015b.pdf) +Texas_Junior_BGA-80 +0 +80 +80 +Package_BGA +Texas_MicroStar_Junior_BGA-113_7.0x7.0mm_Layout12x12_P0.5mm +Texas Instruments, BGA Microstar Junior, NSMD, 7x7mm, 113 Ball, 12x12 Layout, 0.5mm Pitch, http://www.ti.com/lit/ml/mpbg674/mpbg674.pdf, http://www.ti.com/lit/wp/ssyz015b/ssyz015b.pdf +BGA 113 0.5 +0 +113 +113 +Package_BGA +UCBGA-36_2.5x2.5mm_Layout6x6_P0.4mm +UCBGA-36, 6x6 raster, 2.5x2.5mm package, pitch 0.4mm; https://www.latticesemi.com/view_document?document_id=213 +BGA 36 0.4 +0 +36 +36 +Package_BGA +UCBGA-49_3x3mm_Layout7x7_P0.4mm +UCBGA-49, 7x7 raster, 3x3mm package, pitch 0.4mm; https://www.latticesemi.com/view_document?document_id=213 +BGA 49 0.4 +0 +49 +49 +Package_BGA +UCBGA-81_4x4mm_Layout9x9_P0.4mm +UCBGA-81, 9x9 raster, 4x4mm package, pitch 0.4mm; https://www.latticesemi.com/view_document?document_id=213 +BGA 81 0.4 +0 +81 +81 +Package_BGA +UFBGA-15_3.0x3.0mm_Layout4x4_P0.65mm +UFBGA-15, 4x4, 3x3mm package, pitch 0.65mm +UFBGA-15 +0 +15 +15 +Package_BGA +UFBGA-32_4.0x4.0mm_Layout6x6_P0.5mm +UFBGA-32, 6x6, 4x4mm package, pitch 0.5mm +UFBGA-32 +0 +32 +32 +Package_BGA +UFBGA-64_5x5mm_Layout8x8_P0.5mm +UFBGA-64, 8x8 raster, 5x5mm package, pitch 0.5mm; see section 7.1 of http://www.st.com/resource/en/datasheet/stm32f051t8.pdf +BGA 64 0.5 +0 +64 +64 +Package_BGA +UFBGA-100_7x7mm_Layout12x12_P0.5mm +UFBGA-100, 12x12 raster, 7x7mm package, pitch 0.5mm; see section 7.1 of http://www.st.com/resource/en/datasheet/stm32f103tb.pdf +BGA 100 0.5 +0 +100 +100 +Package_BGA +UFBGA-132_7x7mm_Layout12x12_P0.5mm +UFBGA-132, 12x12 raster, 7x7mm package, pitch 0.5mm; see section 7.4 of http://www.st.com/resource/en/datasheet/stm32l152zc.pdf +BGA 132 0.5 +0 +132 +132 +Package_BGA +UFBGA-132_7x7mm_P0.5mm +UFBGA 132 Pins, 0.5mm Pitch, 0.3mm Ball, http://www.st.com/resource/en/datasheet/stm32l486qg.pdf +ufbga bga small-pitch +0 +132 +132 +Package_BGA +UFBGA-144_7x7mm_Layout12x12_P0.5mm +UFBGA-144, 12x12 raster, 7x7mm package, pitch 0.5mm; see section 7.4 of http://www.st.com/resource/en/datasheet/stm32f446ze.pdf +BGA 144 0.5 +0 +144 +144 +Package_BGA +UFBGA-144_10x10mm_Layout12x12_P0.8mm +UFBGA-144, 12x12 raster, 10x10mm package, pitch 0.8mm; see section 7.5 of http://www.st.com/resource/en/datasheet/stm32f446ze.pdf +BGA 144 0.8 +0 +144 +144 +Package_BGA +UFBGA-169_7x7mm_Layout13x13_P0.5mm +UFBGA-169, 13x13 raster, 7x7mm package, pitch 0.5mm; see section 7.6 of http://www.st.com/resource/en/datasheet/stm32f429ng.pdf +BGA 169 0.5 +0 +169 +169 +Package_BGA +UFBGA-201_10x10mm_Layout15x15_P0.65mm +UFBGA-201, 15x15 raster, 10x10mm package, pitch 0.65mm; see section 7.6 of http://www.st.com/resource/en/datasheet/stm32f207vg.pdf +BGA 201 0.65 +0 +201 +201 +Package_BGA +VFBGA-49_5.0x5.0mm_Layout7x7_P0.65mm +VFBGA-49, 7x7, 5x5mm package, pitch 0.65mm +VFBGA-49 +0 +49 +49 +Package_BGA +VFBGA-86_6x6mm_Layout10x10_P0.55mm_Ball0.25mm_Pad0.2mm +VFBGA-86, 6.0x6.0mm, 86 Ball, 10x10 Layout, 0.55mm Pitch, https://www.dialog-semiconductor.com/sites/default/files/da1469x_datasheet_3v1.pdf#page=740 +BGA 86 0.55 +0 +86 +86 +Package_BGA +VFBGA-100_7.0x7.0mm_Layout10x10_P0.65mm +VFBGA-100, 10x10, 7x7mm package, pitch 0.65mm +VFBGA-100 +0 +100 +100 +Package_BGA +WLP-4_0.73x0.73mm_Layout2x2_P0.35mm_Ball0.22mm_Pad0.2mm_NSMD +WLP-4, 2x2 raster, 0.73x0.73mm package, pitch 0.35mm; https://datasheets.maximintegrated.com/en/ds/MAX40200.pdf +BGA 4 0.35 +0 +4 +4 +Package_BGA +WLP-4_0.83x0.83mm_P0.4mm +WLP-4_0.83x0.83mm_P0.4mm https://pdfserv.maximintegrated.com/package_dwgs/21-100107.PDF, https://www.maximintegrated.com/en/app-notes/index.mvp/id/1891 +WLP-4 +0 +4 +4 +Package_BGA +WLP-4_0.86x0.86mm_P0.4mm +WLP-4_0.86x0.86mm_P0.4mm https://pdfserv.maximintegrated.com/package_dwgs/21-0612.PDF, https://www.maximintegrated.com/en/app-notes/index.mvp/id/1891 +WLP-4 +0 +4 +4 +Package_BGA +WLP-9_1.448x1.468mm_Layout3x3_P0.4mm_Ball0.27mm_Pad0.25mm +WLP-9, 1.448x1.468mm, 9 Ball, 3x3 Layout, 0.4mm Pitch, https://pdfserv.maximintegrated.com/package_dwgs/21-100168.PDF +BGA 9 0.4 +0 +9 +9 +Package_BGA +XBGA-121_10x10mm_Layout11x11_P0.8mm +XBGA-121, 11x11 raster, 10x10mm package, pitch 0.6mm; http://ww1.microchip.com/downloads/en/DeviceDoc/39969b.pdf +BGA 121 0.8 +0 +121 +121 +Package_BGA +XFBGA-36_3.5x3.5mm_Layout6x6_P0.5mm +XFBGA-36, https://www.nxp.com/docs/en/package-information/SOT1555-1.pdf +XFBGA-36 +0 +36 +36 +Package_BGA +XFBGA-64_5.0x5.0mm_Layout8x8_P0.5mm +XFBGA-64, https://www.nxp.com/docs/en/package-information/SOT1555-1.pdf +XFBGA-64 +0 +64 +64 +Package_BGA +XFBGA-121_8x8mm_Layout11x11_P0.65mm +XFBGA-121, https://www.nxp.com/docs/en/package-information/SOT1533-1.pdf +XFBGA-121 +0 +121 +121 +Package_BGA +Xilinx_CLG225 +Zynq-7000 BGA, 15x15 grid, 13x13mm package, 0.8mm pitch; https://www.xilinx.com/support/documentation/user_guides/ug865-Zynq-7000-Pkg-Pinout.pdf#page=77, NSMD pad definition Appendix A +BGA 225 0.8 CLG225 +0 +225 +225 +Package_BGA +Xilinx_CLG400 +Zynq-7000 BGA, 20x20 grid, 17x17mm package, 0.8mm pitch; https://www.xilinx.com/support/documentation/user_guides/ug865-Zynq-7000-Pkg-Pinout.pdf#page=78, NSMD pad definition Appendix A +BGA 400 0.8 CLG400 CL400 +0 +400 +400 +Package_BGA +Xilinx_CLG484_CLG485 +Zynq-7000 BGA, 22x22 grid, 19x19mm package, 0.8mm pitch; https://www.xilinx.com/support/documentation/user_guides/ug865-Zynq-7000-Pkg-Pinout.pdf#page=79, NSMD pad definition Appendix A +BGA 484 0.8 CLG484 CL484 CLG485 CL485 +0 +484 +484 +Package_BGA +Xilinx_CPG236 +Artix-7 BGA, 19x19 grid, 10x10mm package, 0.5mm pitch; https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=266, NSMD pad definition Appendix A +BGA 238 0.5 CP236 CPG236 +0 +238 +238 +Package_BGA +Xilinx_CPG238 +Artix-7 BGA, 19x19 grid, 10x10mm package, 0.5mm pitch; https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=267, NSMD pad definition Appendix A +BGA 238 0.5 CPG238 +0 +238 +238 +Package_BGA +Xilinx_CPGA196 +Spartan-7 BGA, 14x14 grid, 8x8mm package, 0.5mm pitch; https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=260, NSMD pad definition Appendix A +BGA 196 0.5 CPGA196 +0 +196 +196 +Package_BGA +Xilinx_CSG324 +Artix-7 BGA, 18x18 grid, 15x15mm package, 0.8mm pitch; https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=268, NSMD pad definition Appendix A +BGA 324 0.8 CS324 CSG324 +0 +324 +324 +Package_BGA +Xilinx_CSG325 +Artix-7 BGA, 18x18 grid, 15x15mm package, 0.8mm pitch; https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=268, NSMD pad definition Appendix A +BGA 324 0.8 CS325 CSG235 +0 +324 +324 +Package_BGA +Xilinx_CSGA225 +Spartan-7 BGA, 15x15 grid, 13x13mm package, 0.8mm pitch; https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=262, NSMD pad definition Appendix A +BGA 225 0.8 CSGA225 +0 +225 +225 +Package_BGA +Xilinx_CSGA324 +Spartan-7 BGA, 18x18 grid, 15x15mm package, 0.8mm pitch; https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=263, NSMD pad definition Appendix A +BGA 324 0.8 CSGA324 +0 +324 +324 +Package_BGA +Xilinx_FBG484 +Artix-7, Kintex-7 and Zynq-7000 BGA, 22x22 grid, 23x23mm package, 1mm pitch; https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=271, ttps://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=281, https://www.xilinx.com/support/documentation/user_guides/ug865-Zynq-7000-Pkg-Pinout.pdf#page=82, NSMD pad definition Appendix A +BGA 484 1 FB484 FBG484 FBV484 +0 +484 +484 +Package_BGA +Xilinx_FBG676 +Artix-7, Kintex-7 and Zynq-7000 BGA, 26x26 grid, 27x27mm package, 1mm pitch; https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=273, https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=284, https://www.xilinx.com/support/documentation/user_guides/ug865-Zynq-7000-Pkg-Pinout.pdf#page=84, NSMD pad definition Appendix A +BGA 676 1 FB676 FBG676 FBV676 +0 +676 +676 +Package_BGA +Xilinx_FBG900 +Kintex-7 BGA, 30x30 grid, 31x31mm package, 1mm pitch; https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=289, NSMD pad definition Appendix A +BGA 900 1 FB900 FBG900 FBV900 +0 +900 +900 +Package_BGA +Xilinx_FFG676 +Kintex-7 and Zynq-7000 BGA, 26x26 grid, 27x27mm package, 1mm pitch; https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=292, https://www.xilinx.com/support/documentation/user_guides/ug865-Zynq-7000-Pkg-Pinout.pdf#page=88, NSMD pad definition Appendix A +BGA 676 1 FF676 FFG676 FFV676 +0 +676 +676 +Package_BGA +Xilinx_FFG900_FFG901 +Kintex-7 and Zynq-7000 BGA, 30x30 grid, 31x31mm package, 1mm pitch; https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=294, https://www.xilinx.com/support/documentation/user_guides/ug865-Zynq-7000-Pkg-Pinout.pdf#page=90, NSMD pad definition Appendix A +BGA 900 1 FF900 FFG900 FFV900 FF901 FFG901 FFV901 +0 +900 +900 +Package_BGA +Xilinx_FFG1156 +Artix-7, Kintex-7 and Zynq-7000 BGA, 34x34 grid, 35x35mm package, 1mm pitch; https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=277, https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=296, https://www.xilinx.com/support/documentation/user_guides/ug865-Zynq-7000-Pkg-Pinout.pdf#page=91, NSMD pad definition Appendix A +BGA 1156 1 FF1156 FFG1156 FFV1156 +0 +1156 +1156 +Package_BGA +Xilinx_FFG1157_FFG1158 +Virtex-7 BGA, 34x34 grid, 35x35mm package, 1mm pitch; https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=299, NSMD pad definition Appendix A +BGA 1156 1 FF1157 FFG1157 FFV1157 FF1158 FFG1158 FFV1158 +0 +1156 +1156 +Package_BGA +Xilinx_FFG1761 +Virtex-7 BGA, 42x42 grid, 42.5x42.5mm package, 1mm pitch; https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=300, NSMD pad definition Appendix A +BGA 1760 1 FF1761 FFG1761 +0 +1760 +1760 +Package_BGA +Xilinx_FFG1926_FFG1927_FFG1928_FFG1930 +Virtex-7 BGA, 44x44 grid, 45x45mm package, 1mm pitch; https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=303, NSMD pad definition Appendix A +BGA 1924 1 FF1926 FFG1926 FF1927 FFG1927 FFV1927 FF1928 FFG1928 FF1930 FFG1930 +0 +1924 +1924 +Package_BGA +Xilinx_FFV1761 +Virtex-7 BGA, 42x42 grid, 42.5x42.5mm package, 1mm pitch; https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=301, NSMD pad definition Appendix A +BGA 1760 1 FFV1761 +0 +1760 +1760 +Package_BGA +Xilinx_FGG484 +Artix-7 BGA, 22x22 grid, 23x23mm package, 1mm pitch; https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=275, NSMD pad definition Appendix A +BGA 484 1 FG484 FGG484 +0 +484 +484 +Package_BGA +Xilinx_FGG676 +Artix-7 BGA, 26x26 grid, 27x27mm package, 1mm pitch; https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=276, NSMD pad definition Appendix A +BGA 676 1 FG676 FGG676 +0 +676 +676 +Package_BGA +Xilinx_FGGA484 +Spartan-7 BGA, 22x22 grid, 23x23mm package, 1mm pitch; https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=264, NSMD pad definition Appendix A +BGA 484 1 FGGA484 +0 +484 +484 +Package_BGA +Xilinx_FGGA676 +Spartan-7 BGA, 26x26 grid, 27x27mm package, 1mm pitch; https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=265, NSMD pad definition Appendix A +BGA 676 1 FGGA676 +0 +676 +676 +Package_BGA +Xilinx_FHG1761 +Virtex-7 BGA, 42x42 grid, 45x45mm package, 1mm pitch; https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=302, NSMD pad definition Appendix A +BGA 1760 1 FH1761 FHG1761 +0 +1760 +1760 +Package_BGA +Xilinx_FLG1925_FLG1926_FLG1928_FLG1930 +Virtex-7 BGA, 44x44 grid, 45x45mm package, 1mm pitch; https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=304, NSMD pad definition Appendix A +BGA 1924 1 FL1925 FLG1925 FL1926 FLG1926 FL1928 FLG1928 FL1930 FLG1930 +0 +1924 +1924 +Package_BGA +Xilinx_FTG256 +Artix-7 BGA, 16x16 grid, 17x17mm package, 1mm pitch; https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=269, NSMD pad definition Appendix A +BGA 256 1 FT256 FTG256 +0 +256 +256 +Package_BGA +Xilinx_FTGB196 +Spartan-7 BGA, 14x14 grid, 15x15mm package, 1mm pitch; https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=261, NSMD pad definition Appendix A +BGA 196 1 FTGB196 +0 +196 +196 +Package_BGA +Xilinx_RB484 +Artix-7 and Zynq-7000 BGA, 22x22 grid, 23x23mm package, 1mm pitch; https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=278, https://www.xilinx.com/support/documentation/user_guides/ug865-Zynq-7000-Pkg-Pinout.pdf#page=92, NSMD pad definition Appendix A +BGA 484 1 RB484 +0 +484 +484 +Package_BGA +Xilinx_RB676 +Artix-7 BGA, 26x26 grid, 27x27mm package, 1mm pitch; https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=280, NSMD pad definition Appendix A +BGA 676 1 RB676 +0 +676 +676 +Package_BGA +Xilinx_RF676 +Kintex-7 BGA, 26x26 grid, 27x27mm package, 1mm pitch; https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=297, NSMD pad definition Appendix A +BGA 676 1 RF676 +0 +676 +676 +Package_BGA +Xilinx_RF900 +Kintex-7 and Zynq-7000 BGA, 30x30 grid, 31x31mm package, 1mm pitch; https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=298, https://www.xilinx.com/support/documentation/user_guides/ug865-Zynq-7000-Pkg-Pinout.pdf#page=94, NSMD pad definition Appendix A +BGA 900 1 RF900 +0 +900 +900 +Package_BGA +Xilinx_RF1156 +Zynq-7000 BGA, 34x34 grid, 35x35mm package, 1mm pitch; https://www.xilinx.com/support/documentation/user_guides/ug865-Zynq-7000-Pkg-Pinout.pdf#page=95, NSMD pad definition Appendix A +BGA 1156 1 RF1156 +0 +1156 +1156 +Package_BGA +Xilinx_RF1157_RF1158 +Virtex-7 BGA, 34x34 grid, 35x35mm package, 1mm pitch; https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=305, NSMD pad definition Appendix A +BGA 1156 1 RF1157 RF1158 +0 +1156 +1156 +Package_BGA +Xilinx_RF1761 +Virtex-7 BGA, 42x42 grid, 42.5x42.5mm package, 1mm pitch; https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=306, NSMD pad definition Appendix A +BGA 1760 1 RF1761 +0 +1760 +1760 +Package_BGA +Xilinx_RF1930 +Virtex-7 BGA, 44x44 grid, 45x45mm package, 1mm pitch; https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=307, NSMD pad definition Appendix A +BGA 1924 1 RF1930 +0 +1924 +1924 +Package_BGA +Xilinx_RFG676 +Zynq-7000 BGA, 26x26 grid, 27x27mm package, 1mm pitch; https://www.xilinx.com/support/documentation/user_guides/ug865-Zynq-7000-Pkg-Pinout.pdf#page=93, NSMD pad definition Appendix A +BGA 676 1 RF676 RFG676 +0 +676 +676 +Package_BGA +Xilinx_RS484 +Artix-7 BGA, 22x22 grid, 19x19mm package, 0.8mm pitch; https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=279, NSMD pad definition Appendix A +BGA 484 0.8 RS484 +0 +484 +484 +Package_BGA +Xilinx_SBG484 +Artix-7 BGA, 22x22 grid, 19x19mm package, 0.8mm pitch; https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=270, NSMD pad definition Appendix A +BGA 484 0.8 SB484 SBG484 SBV484 +0 +484 +484 +Package_BGA +Xilinx_SBG485 +Zynq-7000 BGA, 22x22 grid, 19x19mm package, 0.8mm pitch; https://www.xilinx.com/support/documentation/user_guides/ug865-Zynq-7000-Pkg-Pinout.pdf#page=80, NSMD pad definition Appendix A +BGA 484 0.8 SBG485 SBV485 +0 +484 +484 +Package_CSP +Analog_LFCSP-8-1EP_3x3mm_P0.5mm_EP1.53x1.85mm +LFCSP, exposed pad, Analog Devices (http://www.analog.com/media/en/technical-documentation/data-sheets/ADL5542.pdf) +LFCSP 8 0.5 +0 +12 +5 +Package_CSP +Analog_LFCSP-16-1EP_4x4mm_P0.65mm_EP2.1x2.1mm +Analog LFCSP, 16 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp_16_23.pdf, CP-16-23), generated with kicad-footprint-generator ipc_noLead_generator.py +Analog LFCSP NoLead +0 +21 +17 +Package_CSP +Analog_LFCSP-16-1EP_4x4mm_P0.65mm_EP2.1x2.1mm_ThermalVias +Analog LFCSP, 16 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp_16_23.pdf, CP-16-23), generated with kicad-footprint-generator ipc_noLead_generator.py +Analog LFCSP NoLead +0 +31 +17 +Package_CSP +Analog_LFCSP-16-1EP_4x4mm_P0.65mm_EP2.35x2.35mm +Analog LFCSP, 16 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp_16_20.pdf, CP-16-20), generated with kicad-footprint-generator ipc_noLead_generator.py +Analog LFCSP NoLead +0 +21 +17 +Package_CSP +Analog_LFCSP-16-1EP_4x4mm_P0.65mm_EP2.35x2.35mm_ThermalVias +Analog LFCSP, 16 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp_16_20.pdf, CP-16-20), generated with kicad-footprint-generator ipc_noLead_generator.py +Analog LFCSP NoLead +0 +31 +17 +Package_CSP +Analog_LFCSP-UQ-10_1.3x1.6mm_P0.4mm +Analog LFCSP-UQ, 10 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp_10_10.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +Analog LFCSP-UQ NoLead +0 +10 +10 +Package_CSP +DiodesInc_GEA20_WLCSP-20_1.70x2.10mm_Layout4x5_P0.4mm +Diodes Incorporated WLCSP-20, GEA20, 1.7x2.1mm, 20 Ball, 4x5 Layout, 0.4mm Pitch, https://www.diodes.com/assets/Package-Files/GEA20.pdf +CSP 20 0.4 +0 +20 +20 +Package_CSP +Efinix_WLCSP-64_3.5353x3.3753mm_Layout8x8_P0.4mm +Efinix WLCSP, NSMD pad definition Page 60, 3.5353x3.3753mm, 64 Ball, 8x8 Layout, 0.4mm Pitch, https://www.efinixinc.com/docs/titanium-packaging-ug-v5.2.pdf +CSP 64 0.4 64-ball WLCSP +0 +64 +64 +Package_CSP +LFCSP-6-1EP_2x2mm_P0.65mm_EP1x1.6mm +LFCSP, 6 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp_6_3.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LFCSP NoLead +0 +11 +7 +Package_CSP +LFCSP-8-1EP_3x2mm_P0.5mm_EP1.6x1.65mm +LFCSP 8pin Pitch 0.5mm, http://www.analog.com/media/en/package-pcb-resources/package/57080735642908cp_8_4.pdf +LFCSP 8pin thermal pad 3x2mm Pitch 0.5mm +0 +9 +9 +Package_CSP +LFCSP-8-1EP_3x3mm_P0.5mm_EP1.6x2.34mm +LFCSP, 8 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/CP_8_11.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LFCSP NoLead +0 +13 +9 +Package_CSP +LFCSP-8-1EP_3x3mm_P0.5mm_EP1.6x2.34mm_ThermalVias +LFCSP, 8 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/CP_8_11.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LFCSP NoLead +0 +20 +9 +Package_CSP +LFCSP-8-1EP_3x3mm_P0.5mm_EP1.45x1.74mm +LFCSP, 8 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-8/CP_8_13.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LFCSP NoLead +0 +13 +9 +Package_CSP +LFCSP-8_2x2mm_P0.5mm +LFCSP 8pin Pitch 0.5mm, http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp_8_6.pdf +LFCSP 8pin 2x2mm Pitch 0.5mm +0 +8 +8 +Package_CSP +LFCSP-16-1EP_3x3mm_P0.5mm_EP1.3x1.3mm +LFCSP, 16 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-16/CP_16_21.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LFCSP NoLead +0 +21 +17 +Package_CSP +LFCSP-16-1EP_3x3mm_P0.5mm_EP1.3x1.3mm_ThermalVias +LFCSP, 16 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-16/CP_16_21.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LFCSP NoLead +0 +26 +17 +Package_CSP +LFCSP-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm +LFCSP, 16 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-16/CP_16_22.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LFCSP NoLead +0 +21 +17 +Package_CSP +LFCSP-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm_ThermalVias +LFCSP, 16 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-16/CP_16_22.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LFCSP NoLead +0 +26 +17 +Package_CSP +LFCSP-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm +LFCSP, 16 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/HMC7992.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LFCSP NoLead +0 +21 +17 +Package_CSP +LFCSP-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm_ThermalVias +LFCSP, 16 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/HMC7992.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LFCSP NoLead +0 +26 +17 +Package_CSP +LFCSP-16-1EP_3x3mm_P0.5mm_EP1.854x1.854mm +16-Lead Lead Frame Chip Scale Package, 3x3mm, 0.5mm pitch, 1.854mm thermal pad (CP-16-22, http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp_16_22.pdf) +LFCSP 16 0.5 +0 +21 +17 +Package_CSP +LFCSP-16-1EP_4x4mm_P0.65mm_EP2.1x2.1mm +LFCSP, 16 pin, 4x4mm, 2.1mm sq pad (http://www.analog.com/media/en/technical-documentation/data-sheets/ADG633.pdf) +LFCSP 16 0.65 +0 +21 +17 +Package_CSP +LFCSP-16-1EP_4x4mm_P0.65mm_EP2.4x2.4mm +LFCSP, 16 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-16/cp-16-40.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LFCSP NoLead +0 +21 +17 +Package_CSP +LFCSP-16-1EP_4x4mm_P0.65mm_EP2.4x2.4mm_ThermalVias +LFCSP, 16 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-16/cp-16-40.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LFCSP NoLead +0 +31 +17 +Package_CSP +LFCSP-16-1EP_4x4mm_P0.65mm_EP2.6x2.6mm +LFCSP, 16 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp_16_17.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LFCSP NoLead +0 +21 +17 +Package_CSP +LFCSP-16-1EP_4x4mm_P0.65mm_EP2.6x2.6mm_ThermalVias +LFCSP, 16 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp_16_17.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LFCSP NoLead +0 +31 +17 +Package_CSP +LFCSP-16_3x3mm_P0.5mm +LFCSP, 16 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-16/CP_16_32.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LFCSP NoLead +0 +16 +16 +Package_CSP +LFCSP-20-1EP_4x4mm_P0.5mm_EP2.1x2.1mm +20-Lead Frame Chip Scale Package - 4x4x0.9 mm Body [LFCSP], (see http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp_20_6.pdf) +LFCSP 0.5 +0 +25 +21 +Package_CSP +LFCSP-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm +LFCSP, 20 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/AD7682_7689.pdf), generated with kicad-footprint-generator ipc_dfn_qfn_generator.py +LFCSP DFN_QFN +0 +25 +21 +Package_CSP +LFCSP-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm_ThermalVias +LFCSP, 20 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/AD7682_7689.pdf), generated with kicad-footprint-generator ipc_dfn_qfn_generator.py +LFCSP DFN_QFN +0 +35 +21 +Package_CSP +LFCSP-20-1EP_4x4mm_P0.5mm_EP2.6x2.6mm +LFCSP, 20 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-20/CP_20_8.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LFCSP NoLead +0 +25 +21 +Package_CSP +LFCSP-20-1EP_4x4mm_P0.5mm_EP2.6x2.6mm_ThermalVias +LFCSP, 20 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-20/CP_20_8.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LFCSP NoLead +0 +35 +21 +Package_CSP +LFCSP-24-1EP_4x4mm_P0.5mm_EP2.3x2.3mm +LFCSP, 24 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp_24_14.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LFCSP NoLead +0 +29 +25 +Package_CSP +LFCSP-24-1EP_4x4mm_P0.5mm_EP2.3x2.3mm_ThermalVias +LFCSP, 24 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp_24_14.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LFCSP NoLead +0 +39 +25 +Package_CSP +LFCSP-24-1EP_4x4mm_P0.5mm_EP2.5x2.5mm +LFCSP, 24 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp_24_7.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LFCSP NoLead +0 +29 +25 +Package_CSP +LFCSP-24-1EP_4x4mm_P0.5mm_EP2.5x2.5mm_ThermalVias +LFCSP, 24 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp_24_7.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LFCSP NoLead +0 +39 +25 +Package_CSP +LFCSP-28-1EP_5x5mm_P0.5mm_EP3.14x3.14mm +LFCSP, 28 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-28/CP_28_10.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LFCSP NoLead +0 +33 +29 +Package_CSP +LFCSP-28-1EP_5x5mm_P0.5mm_EP3.14x3.14mm_ThermalVias +LFCSP, 28 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-28/CP_28_10.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LFCSP NoLead +0 +43 +29 +Package_CSP +LFCSP-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm +LFCSP, 32 Pin (https://www.analog.com/media/en/package-pcb-resources/package/414143737956480539664569cp_32_2.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LFCSP NoLead +0 +42 +33 +Package_CSP +LFCSP-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm_ThermalVias +LFCSP, 32 Pin (https://www.analog.com/media/en/package-pcb-resources/package/414143737956480539664569cp_32_2.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LFCSP NoLead +0 +59 +33 +Package_CSP +LFCSP-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm +LFCSP, 32 Pin (https://www.analog.com/media/en/package-pcb-resources/package/3416438741201015623cp_32_4.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LFCSP NoLead +0 +37 +33 +Package_CSP +LFCSP-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm_ThermalVias +LFCSP, 32 Pin (https://www.analog.com/media/en/package-pcb-resources/package/3416438741201015623cp_32_4.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LFCSP NoLead +0 +47 +33 +Package_CSP +LFCSP-32-1EP_5x5mm_P0.5mm_EP3.6x3.6mm +LFCSP, 32 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/ADV7280.PDF#page=28), generated with kicad-footprint-generator ipc_noLead_generator.py +LFCSP NoLead +0 +37 +33 +Package_CSP +LFCSP-32-1EP_5x5mm_P0.5mm_EP3.6x3.6mm_ThermalVias +LFCSP, 32 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/ADV7280.PDF#page=28), generated with kicad-footprint-generator ipc_noLead_generator.py +LFCSP NoLead +0 +47 +33 +Package_CSP +LFCSP-32-1EP_5x5mm_P0.5mm_EP3.25x3.25mm +32-Lead Frame Chip Scale Package LFCSP (5mm x 5mm); (see http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-32/CP_32_27.pdf +LFCSP 0.5 +0 +37 +33 +Package_CSP +LFCSP-40-1EP_6x6mm_P0.5mm_EP3.9x3.9mm +LFCSP, 40 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp_40_14.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LFCSP NoLead +0 +45 +41 +Package_CSP +LFCSP-40-1EP_6x6mm_P0.5mm_EP3.9x3.9mm_ThermalVias +LFCSP, 40 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp_40_14.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LFCSP NoLead +0 +55 +41 +Package_CSP +LFCSP-40-1EP_6x6mm_P0.5mm_EP4.6x4.6mm +LFCSP, 40 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-40/CP_40_15.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LFCSP NoLead +0 +45 +41 +Package_CSP +LFCSP-40-1EP_6x6mm_P0.5mm_EP4.6x4.6mm_ThermalVias +LFCSP, 40 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-40/CP_40_15.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LFCSP NoLead +0 +55 +41 +Package_CSP +LFCSP-40-1EP_6x6mm_P0.5mm_EP4.65x4.65mm +LFCSP, 40 Pin (https://www.jedec.org/system/files/docs/MO-220K01.pdf (variation VJJD-5)), generated with kicad-footprint-generator ipc_noLead_generator.py +LFCSP NoLead +0 +45 +41 +Package_CSP +LFCSP-40-1EP_6x6mm_P0.5mm_EP4.65x4.65mm_ThermalVias +LFCSP, 40 Pin (https://www.jedec.org/system/files/docs/MO-220K01.pdf (variation VJJD-5)), generated with kicad-footprint-generator ipc_noLead_generator.py +LFCSP NoLead +0 +55 +41 +Package_CSP +LFCSP-48-1EP_7x7mm_P0.5mm_EP4.1x4.1mm +LFCSP, 48 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp_48_5.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LFCSP NoLead +0 +58 +49 +Package_CSP +LFCSP-48-1EP_7x7mm_P0.5mm_EP4.1x4.1mm_ThermalVias +LFCSP, 48 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp_48_5.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LFCSP NoLead +0 +75 +49 +Package_CSP +LFCSP-64-1EP_9x9mm_P0.5mm_EP5.21x5.21mm +LFCSP, 64 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp_64_7.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LFCSP NoLead +0 +69 +65 +Package_CSP +LFCSP-64-1EP_9x9mm_P0.5mm_EP5.21x5.21mm_ThermalVias +LFCSP, 64 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp_64_7.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LFCSP NoLead +0 +86 +65 +Package_CSP +LFCSP-72-1EP_10x10mm_P0.5mm_EP5.3x5.3mm +LFCSP, 72 Pin (http://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1452_1451_1450.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LFCSP NoLead +0 +82 +73 +Package_CSP +LFCSP-72-1EP_10x10mm_P0.5mm_EP5.3x5.3mm_ThermalVias +LFCSP, 72 Pin (http://www.analog.com/media/en/technical-documentation/data-sheets/ADAU1452_1451_1450.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LFCSP NoLead +0 +99 +73 +Package_CSP +LFCSP-72-1EP_10x10mm_P0.5mm_EP6.15x6.15mm +72-Lead Frame Chip Scale Package - 10x10x0.9 mm Body [LFCSP]; (see https://www.intersil.com/content/dam/Intersil/documents/l72_/l72.10x10c.pdf) +LFCSP 0.5 +0 +77 +73 +Package_CSP +LFCSP-VQ-24-1EP_4x4mm_P0.5mm_EP2.642x2.642mm +LFCSP VQ, 24 pin, exposed pad, 4x4mm body, pitch 0.5mm (http://www.analog.com/media/en/package-pcb-resources/package/56702234806764cp_24_3.pdf, http://www.analog.com/media/en/technical-documentation/data-sheets/ADL5801.pdf) +LFCSP 0.5 +0 +29 +25 +Package_CSP +LFCSP-VQ-48-1EP_7x7mm_P0.5mm +LFCSP VQ, 48 pin, exposed pad, 7x7mm body (http://www.analog.com/media/en/technical-documentation/data-sheets/AD7951.pdf, http://www.analog.com/en/design-center/packaging-quality-symbols-footprints/symbols-and-footprints/AD7951.html) +LFCSP 48 +0 +49 +49 +Package_CSP +LFCSP-WD-8-1EP_3x3mm_P0.65mm_EP1.6x2.44mm +LFCSP-WD, 8 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/CP_8_19.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LFCSP-WD NoLead +0 +15 +9 +Package_CSP +LFCSP-WD-8-1EP_3x3mm_P0.65mm_EP1.6x2.44mm_ThermalVias +LFCSP-WD, 8 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/CP_8_19.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LFCSP-WD NoLead +0 +22 +9 +Package_CSP +LFCSP-WD-10-1EP_3x3mm_P0.5mm_EP1.64x2.38mm +LFCSP-WD, 10 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-10/CP_10_9.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LFCSP-WD NoLead +0 +17 +11 +Package_CSP +LFCSP-WD-10-1EP_3x3mm_P0.5mm_EP1.64x2.38mm_ThermalVias +LFCSP-WD, 10 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp-10/CP_10_9.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LFCSP-WD NoLead +0 +24 +11 +Package_CSP +Maxim_WLCSP-35_3.0x2.17mm_Layout7x5_P0.4mm_Ball0.27mm_Pad0.25mm +WLCSP-35, 2.168x2.998mm, 35 Ball, 7x5 Layout, 0.4mm Pitch, https://pdfserv.maximintegrated.com/package_dwgs/21-100489.PDF +CSP 35 0.4 +0 +35 +35 +Package_CSP +Nexperia_WLCSP-15_6-3-6_2.37x1.17mm_Layout6x3_P0.4mm +Nexperia wafer level chip-size package; 15 bumps (6-3-6), 2.37x1.17mm, 15 Ball, 6x3 Layout, 0.4mm Pitch, https://assets.nexperia.com/documents/data-sheet/PCMFXUSB3S_SER.pdf +CSP 15 0.4 +0 +15 +15 +Package_CSP +ST_WLCSP-18_1.86x2.14mm_P0.4mm_Stagger +ST WLCSP-18, ST Die ID 466, 1.86x2.14mm, 18 Ball, X-staggered 7x5 Layout, 0.4mm Pitch, https://www.st.com/resource/en/datasheet/stm32g031y8.pdf +CSP 18 0.4 +0 +18 +18 +Package_CSP +ST_WLCSP-20_1.94x2.40mm_Layout4x5_P0.4mm +ST WLCSP-20, ST die ID 456, 1.94x2.4mm, 20 Ball, 4x5 Layout, 0.4mm Pitch, https://www.st.com/resource/en/datasheet/stm32g051f8.pdf#page=102 +CSP 20 0.4 +0 +20 +20 +Package_CSP +ST_WLCSP-25_2.30x2.48mm_Layout5x5_P0.4mm +ST WLCSP-25, ST die ID 460, 2.3x2.48mm, 25 Ball, 5x5 Layout, 0.4mm Pitch, https://www.st.com/resource/en/datasheet/stm32g071eb.pdf +CSP 25 0.4 +0 +25 +25 +Package_CSP +ST_WLCSP-25_Die425 +WLCSP-25, 5x5 raster, 2.097x2.493mm package, pitch 0.4mm; see section 7.6 of http://www.st.com/resource/en/datasheet/stm32l031f6.pdf +BGA 25 0.4 +0 +25 +25 +Package_CSP +ST_WLCSP-25_Die444 +WLCSP-25, 5x5 raster, 2.423x2.325mm package, pitch 0.4mm; see section 7.5 of http://www.st.com/resource/en/datasheet/stm32f031k6.pdf +BGA 25 0.4 +0 +25 +25 +Package_CSP +ST_WLCSP-25_Die457 +WLCSP-25, 5x5 raster, 2.133x2.070mm package, pitch 0.4mm; see section 7.3 of http://www.st.com/resource/en/datasheet/stm32l011k3.pdf +BGA 25 0.4 +0 +25 +25 +Package_CSP +ST_WLCSP-36_2.58x3.07mm_Layout6x6_P0.4mm +ST WLCSP-36, ST die ID 464, 2.58x3.07mm, 36 Ball, 6x6 Layout, 0.4mm Pitch, https://www.st.com/resource/en/datasheet/stm32l412t8.pdf +CSP 36 0.4 +0 +36 +36 +Package_CSP +ST_WLCSP-36_Die417 +WLCSP-36, 6x6 raster, 2.61x2.88mm package, pitch 0.4mm; see section 7.4 of http://www.st.com/resource/en/datasheet/stm32l052t8.pdf +BGA 36 0.4 +0 +36 +36 +Package_CSP +ST_WLCSP-36_Die440 +WLCSP-36, 6x6 raster, 2.605x2.703mm package, pitch 0.4mm; see section 7.5 of http://www.st.com/resource/en/datasheet/stm32f051t8.pdf +BGA 36 0.4 +0 +36 +36 +Package_CSP +ST_WLCSP-36_Die445 +WLCSP-36, 6x6 raster, 2.605x2.703mm package, pitch 0.4mm; see section 7.3 of http://www.st.com/resource/en/datasheet/stm32f042k6.pdf +BGA 36 0.4 +0 +36 +36 +Package_CSP +ST_WLCSP-36_Die458 +WLCSP-36, 6x6 raster, 2.553x2.579mm package, pitch 0.4mm; see section 7.1 of http://www.st.com/resource/en/datasheet/stm32f410t8.pdf +BGA 36 0.4 +0 +36 +36 +Package_CSP +ST_WLCSP-49_3.15x3.13mm_Layout7x7_P0.4mm +ST WLCSP-49, ST die ID 468, 3.15x3.13mm, 49 Ball, 7x7 Layout, 0.4mm Pitch, https://www.st.com/resource/en/datasheet/stm32g431c6.pdf +CSP 49 0.4 +0 +49 +49 +Package_CSP +ST_WLCSP-49_3.30x3.38mm_Layout7x7_P0.4mm_Offcenter +ST WLCSP-49, off-center ball grid, ST die ID 494, 3.3x3.38mm, 49 Ball, 7x7 Layout, 0.4mm Pitch, https://www.st.com/resource/en/datasheet/stm32wb15cc.pdf#page=119 +CSP 49 0.4 +0 +49 +49 +Package_CSP +ST_WLCSP-49_Die423 +WLCSP-49, 7x7 raster, 2.965x2.965mm package, pitch 0.4mm; see section 7.1 of http://www.st.com/resource/en/datasheet/stm32f401vc.pdf +BGA 49 0.4 +0 +49 +49 +Package_CSP +ST_WLCSP-49_Die431 +WLCSP-49, 7x7 raster, 2.999x3.185mm package, pitch 0.4mm; see section 7.1 of http://www.st.com/resource/en/datasheet/stm32f411vc.pdf +BGA 49 0.4 +0 +49 +49 +Package_CSP +ST_WLCSP-49_Die433 +WLCSP-49, 7x7 raster, 3.029x3.029mm package, pitch 0.4mm; see section 7.1.1 of http://www.st.com/resource/en/datasheet/stm32f401ce.pdf +BGA 49 0.4 +0 +49 +49 +Package_CSP +ST_WLCSP-49_Die435 +WLCSP-49, 7x7 raster, 3.141x3.127mm package, pitch 0.4mm; see section 7.6 of http://www.st.com/resource/en/datasheet/DM00257211.pdf +BGA 49 0.4 +0 +49 +49 +Package_CSP +ST_WLCSP-49_Die438 +WLCSP-49, 7x7 raster, 3.89x3.74mm package, pitch 0.5mm; see section 7.5 of http://www.st.com/resource/en/datasheet/stm32f303r8.pdf +BGA 49 0.5 +0 +49 +49 +Package_CSP +ST_WLCSP-49_Die439 +WLCSP-49, 7x7 raster, 3.417x3.151mm package, pitch 0.4mm; see section 7.1 of http://www.st.com/resource/en/datasheet/stm32f301r8.pdf +BGA 49 0.4 +0 +49 +49 +Package_CSP +ST_WLCSP-49_Die447 +WLCSP-49, 7x7 raster, 3.294x3.258mm package, pitch 0.4mm; see section 7.6 of http://www.st.com/resource/en/datasheet/stm32l072kz.pdf +BGA 49 0.4 +0 +49 +49 +Package_CSP +ST_WLCSP-49_Die448 +WLCSP-49, 7x7 raster, 3.277x3.109mm package, pitch 0.4mm; see section 7.4 of http://www.st.com/resource/en/datasheet/stm32f071v8.pdf +BGA 49 0.4 +0 +49 +49 +Package_CSP +ST_WLCSP-52_3.09x3.15mm_P0.4mm_Stagger +ST WLCSP-52, ST die ID 467, 3.09x3.15mm, 52 Ball, X-staggered 13x8 Layout, 0.4mm Pitch, https://www.st.com/resource/en/datasheet/stm32g0b1ne.pdf#page=136 +CSP 52 0.4 +0 +52 +52 +Package_CSP +ST_WLCSP-63_Die427 +WLCSP-63, 7x9 raster, 3.228x4.164mm package, pitch 0.4mm; see section 7.6 of http://www.st.com/resource/en/datasheet/stm32l151cc.pdf +BGA 63 0.4 +0 +63 +63 +Package_CSP +ST_WLCSP-64_3.56x3.52mm_Layout8x8_P0.4mm +ST WLCSP-64, ST die ID 479, 3.56x3.52mm, 64 Ball, 8x8 Layout, 0.4mm Pitch, https://www.st.com/resource/en/datasheet/stm32g491re.pdf +CSP 64 0.4 +0 +64 +64 +Package_CSP +ST_WLCSP-64_Die414 +WLCSP-64, 8x8 raster, 4.466x4.395mm package, pitch 0.5mm; see section 6.3 of http://www.st.com/resource/en/datasheet/stm32f103ze.pdf +BGA 64 0.5 +0 +64 +64 +Package_CSP +ST_WLCSP-64_Die427 +WLCSP-64, 8x8 raster, 4.539x4.911mm package, pitch 0.4mm; see section 7.5 of http://www.st.com/resource/en/datasheet/stm32l152zc.pdf +BGA 64 0.4 +0 +64 +64 +Package_CSP +ST_WLCSP-64_Die435 +WLCSP-64, 8x8 raster, 3.141x3.127mm package, pitch 0.35mm; see section 7.5 of http://www.st.com/resource/en/datasheet/DM00257211.pdf +BGA 64 0.35 +0 +64 +64 +Package_CSP +ST_WLCSP-64_Die436 +WLCSP-64, 8x8 raster, 4.539x4.911mm package, pitch 0.4mm; see section 7.5 of http://www.st.com/resource/en/datasheet/stm32l152zd.pdf +BGA 64 0.4 +0 +64 +64 +Package_CSP +ST_WLCSP-64_Die441 +WLCSP-64, 8x8 raster, 3.623x3.651mm package, pitch 0.4mm; see section 7.1 of http://www.st.com/resource/en/datasheet/DM00213872.pdf +BGA 64 0.4 +0 +64 +64 +Package_CSP +ST_WLCSP-64_Die442 +WLCSP-64, 8x8 raster, 3.347x3.585mm package, pitch 0.4mm; see section 7.4 of http://www.st.com/resource/en/datasheet/stm32f091vb.pdf +BGA 64 0.4 +0 +64 +64 +Package_CSP +ST_WLCSP-64_Die462 +WLCSP-64, 8x8 raster, 3.357x3.657mm package, pitch 0.4mm; see section 7.5 of http://www.st.com/resource/en/datasheet/DM00340475.pdf +BGA 64 0.4 +0 +64 +64 +Package_CSP +ST_WLCSP-66_Die411 +WLCSP-66, 9x9 raster, 3.639x3.971mm package, pitch 0.4mm; see section 7.2 of http://www.st.com/resource/en/datasheet/stm32f207vg.pdf +BGA 66 0.4 +0 +66 +66 +Package_CSP +ST_WLCSP-66_Die432 +WLCSP-66, 8x9 raster, 3.767x4.229mm package, pitch 0.4mm; see section 7.2 of http://www.st.com/resource/en/datasheet/stm32f378vc.pdf +BGA 66 0.4 +0 +66 +66 +Package_CSP +ST_WLCSP-72_Die415 +WLCSP-72, 9x9 raster, 4.4084x3.7594mm package, pitch 0.4mm; see section 7.5 of http://www.st.com/resource/en/datasheet/stm32l476me.pdf +BGA 72 0.4 +0 +72 +72 +Package_CSP +ST_WLCSP-81_4.02x4.27mm_Layout9x9_P0.4mm +ST WLCSP-81, ST die ID 469, 4.02x4.27mm, 81 Ball, 9x9 Layout, 0.4mm Pitch, https://www.st.com/resource/en/datasheet/stm32g483me.pdf +CSP 81 0.4 +0 +81 +81 +Package_CSP +ST_WLCSP-81_4.36x4.07mm_Layout9x9_P0.4mm +ST WLCSP-81, ST die ID 472, 4.36x4.07mm, 81 Ball, 9x9 Layout, 0.4mm Pitch, https://www.st.com/resource/en/datasheet/stm32l562ce.pdf +CSP 81 0.4 +0 +81 +81 +Package_CSP +ST_WLCSP-81_Die415 +WLCSP-81, 9x9 raster, 4.4084x3.7594mm package, pitch 0.4mm; see section 7.4 of http://www.st.com/resource/en/datasheet/stm32l476me.pdf +BGA 81 0.4 +0 +81 +81 +Package_CSP +ST_WLCSP-81_Die421 +WLCSP-81, 9x9 raster, 3.693x3.815mm package, pitch 0.4mm; see section 7.6 of http://www.st.com/resource/en/datasheet/stm32f446ze.pdf +BGA 81 0.4 +0 +81 +81 +Package_CSP +ST_WLCSP-81_Die463 +WLCSP-81, 9x9 raster, 4.039x3.951mm package, pitch 0.4mm; see section 7.1 of http://www.st.com/resource/en/datasheet/DM00282249.pdf +BGA 81 0.4 +0 +81 +81 +Package_CSP +ST_WLCSP-90_4.20x3.95mm_P0.4mm_Stagger +ST WLCSP-90, ST die ID 482, 4.2x3.95mm, 90 Ball, X-staggered 18x10 Layout, 0.4mm Pitch, https://www.st.com/resource/en/datasheet/stm32u575og.pdf#page=306 +CSP 90 0.4 +0 +90 +90 +Package_CSP +ST_WLCSP-90_Die413 +WLCSP-90, 10x9 raster, 4.223x3.969mm package, pitch 0.4mm; see section 6.1 of http://www.st.com/resource/en/datasheet/stm32f405og.pdf +BGA 90 0.4 +0 +90 +90 +Package_CSP +ST_WLCSP-100_4.40x4.38mm_Layout10x10_P0.4mm_Offcenter +ST WLCSP-100, off-center ball grid, ST die ID 495, 4.4x4.38mm, 100 Ball, 10x10 Layout, 0.4mm Pitch, https://www.st.com/resource/en/datasheet/stm32wb55vc.pdf +CSP 100 0.4 +0 +100 +100 +Package_CSP +ST_WLCSP-100_4.437x4.456mm_Layout10x10_P0.4mm +ST WLCSP-100, ST die ID 471, 4.437x4.456mm, 100 Ball, 10x10 Layout, 0.4mm Pitch, https://www.st.com/resource/en/datasheet/stm32l4p5ve.pdf +CSP 100 0.4 +0 +100 +100 +Package_CSP +ST_WLCSP-100_Die422 +WLCSP-100, 10x10 raster, 4.201x4.663mm package, pitch 0.4mm; see section 7.4 of http://www.st.com/resource/en/datasheet/stm32f302vc.pdf +BGA 100 0.4 +0 +100 +100 +Package_CSP +ST_WLCSP-100_Die446 +WLCSP-100, 10x10 raster, 4.775x5.041mm package, pitch 0.4mm; see section 7.5 of http://www.st.com/resource/en/datasheet/stm32f303zd.pdf +BGA 100 0.4 +0 +100 +100 +Package_CSP +ST_WLCSP-100_Die452 +WLCSP-100, 10x10 raster, 4.201x4.663mm package, pitch 0.4mm; see section 7.7 of http://www.st.com/resource/en/datasheet/DM00330506.pdf +BGA 100 0.4 +0 +100 +100 +Package_CSP +ST_WLCSP-100_Die461 +WLCSP-100, 10x10 raster, 4.618x4.142mm package, pitch 0.4mm; see section 7.5 of http://www.st.com/resource/en/datasheet/DM00284211.pdf +BGA 100 0.4 +0 +100 +100 +Package_CSP +ST_WLCSP-104_Die437 +WLCSP-104, 9x12 raster, 4.095x5.094mm package, pitch 0.4mm; see section 7.5 of http://www.st.com/resource/en/datasheet/stm32l152ze.pdf +BGA 104 0.4 +0 +104 +104 +Package_CSP +ST_WLCSP-115_3.73x4.15mm_P0.35mm_Stagger +ST WLCSP-115, ST die ID 483, 3.73x4.15mm, 115 Ball, Y-staggered 11x21 Layout, 0.35mm Pitch, https://www.st.com/resource/en/datasheet/stm32h725vg.pdf +CSP 115 0.35 +0 +115 +115 +Package_CSP +ST_WLCSP-115_4.63x4.15mm_P0.4mm_Stagger +ST WLCSP-115, ST die ID 461, 4.63x4.15mm, 115 Ball, X-staggered 21x11 Layout, 0.4mm Pitch, https://www.st.com/resource/en/datasheet/stm32l496wg.pdf +CSP 115 0.4 +0 +115 +115 +Package_CSP +ST_WLCSP-132_4.57x4.37mm_Layout12x11_P0.35mm +ST WLCSP-132, ST die ID 480, 4.57x4.37mm, 132 Ball, 12x11 Layout, 0.35mm Pitch, https://www.st.com/resource/en/datasheet/stm32h7a3ai.pdf +CSP 132 0.35 +0 +132 +132 +Package_CSP +ST_WLCSP-143_Die419 +WLCSP-143, 11x13 raster, 4.521x5.547mm package, pitch 0.4mm; see section 7.2 of http://www.st.com/resource/en/datasheet/stm32f429ng.pdf +BGA 143 0.4 +0 +143 +143 +Package_CSP +ST_WLCSP-143_Die449 +WLCSP-143, 11x13 raster, 4.539x5.849mm package, pitch 0.4mm; see section 6.3 of http://www.st.com/resource/en/datasheet/stm32f746zg.pdf +BGA 143 0.4 +0 +143 +143 +Package_CSP +ST_WLCSP-144_Die470 +WLCSP-144, 12x12 raster, 5.24x5.24mm package, pitch 0.4mm; see section 7.4 of http://www.st.com/resource/en/datasheet/DM00366448.pdf +BGA 144 0.4 +0 +144 +144 +Package_CSP +ST_WLCSP-156_4.96x4.64mm_Layout13x12_P0.35mm +ST WLCSP-156, ST die ID 450, 4.96x4.64mm, 156 Ball, 13x12 Layout, 0.35mm Pitch, https://www.st.com/resource/en/datasheet/stm32h747xi.pdf +CSP 156 0.35 +0 +156 +156 +Package_CSP +ST_WLCSP-168_Die434 +WLCSP-168, 12x14 raster, 4.891x5.692mm package, pitch 0.4mm; see section 6.3 of http://www.st.com/resource/en/datasheet/stm32f469ni.pdf +BGA 168 0.4 +0 +168 +168 +Package_CSP +ST_WLCSP-180_Die451 +WLCSP-180, 13x14 raster, 5.537x6.095mm package, pitch 0.4mm; see section 6.6 of http://www.st.com/resource/en/datasheet/DM00273119.pdf +BGA 180 0.4 +0 +180 +180 +Package_CSP +WLCSP-4-X1-WLB0909-4_0.89x0.89mm_P0.5mm +X1-WLB0909, 0.89x0.89mm, 4 Ball, 2x2 Layout, 0.5mm Pitch, https://www.diodes.com/assets/Datasheets/AP22913.pdf +CSP 4 0.5 +0 +4 +4 +Package_CSP +WLCSP-4_0.64x0.64mm_P0.35mm +WLCSP-4, 0.64x0.64mm, 4 Ball, 2x2 Layout, 0.35mm Pitch, https://www.onsemi.com/pdf/datasheet/ncp163-d.pdf#page=23 +CSP 4 0.35 +0 +4 +4 +Package_CSP +WLCSP-6_1.4x1.0mm_P0.4mm +6pin Pitch 0.4mm +6pin Pitch 0.4mm WLCSP +0 +6 +6 +Package_CSP +WLCSP-8_1.58x1.63x0.35mm_Layout3x5_P0.35x0.4mm_Ball0.25mm_Pad0.25mm_NSMD +WLCSP/XFBGA 8-pin package, staggered pins, http://www.adestotech.com/wp-content/uploads/DS-AT25DF041B_040.pdf +WLCSP WLCSP-8 XFBGA XFBGA-8 CSP BGA Chip-Scale Glass-Top +0 +8 +8 +Package_CSP +WLCSP-8_1.551x2.284mm_P0.5mm +WLCSP-8, 2.284x1.551mm, 8 Ball, 2x4 Layout, 0.5mm Pitch, https://www.adestotech.com/wp-content/uploads/AT25SL321_112.pdf#page=75 +CSP 8 0.5 +0 +8 +8 +Package_CSP +WLCSP-12_1.56x1.56mm_P0.4mm +WLCSP 12 1.56x1.56 https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMM150-DS001-01.pdf +BMM150 WLCSP +0 +12 +12 +Package_CSP +WLCSP-12_1.403x1.555mm_P0.4mm_Stagger +WLCSP-12, 6x4 raster staggered array, 1.403x1.555mm package, pitch 0.4mm; http://ww1.microchip.com/downloads/en/devicedoc/atmel-8235-8-bit-avr-microcontroller-attiny20_datasheet.pdf#page=208 +CSP 12 0.2x0.346333 +0 +12 +12 +Package_CSP +WLCSP-16_1.409x1.409mm_P0.35mm +WLCSP-16, 1.409x1.409mm, 16 Ball, 4x4 Layout, 0.35mm Pitch, http://www.latticesemi.com/view_document?document_id=213 +CSP 16 0.35 +0 +16 +16 +Package_CSP +WLCSP-16_2.225x2.17mm_P0.5mm +WLCSP-16 2.225x2.17mm, 2.17x2.225mm, 16 Ball, 4x4 Layout, 0.5mm Pitch, https://ww1.microchip.com/downloads/en/DeviceDoc/16B_WLCSP_CS_C04-06036c.pdf +CSP 16 0.5 +0 +16 +16 +Package_CSP +WLCSP-16_4x4_B2.17x2.32mm_P0.5mm +WLCSP-16, http://www.nxp.com/documents/data_sheet/LPC1102_1104.pdf, http://www.nxp.com/assets/documents/data/en/application-notes/AN3846.pdf +WLCSP-16 NXP +0 +16 +16 +Package_CSP +WLCSP-20_1.934x2.434mm_Layout4x5_P0.4mm +WLCSP-20, 4x5 raster, 1.934x2.434mm package, pitch 0.4mm; see section 36.2.3 of http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-42363-SAM-D11_Datasheet.pdf +BGA 20 0.4 +0 +20 +20 +Package_CSP +WLCSP-20_1.994x1.94mm_Layout4x5_P0.4mm +WLCSP-20, https://www.nxp.com/docs/en/package-information/98ASA00539D.pdf +WLCSP-20 +0 +20 +20 +Package_CSP +WLCSP-20_1.994x1.609mm_Layout5x4_P0.4mm +WLCSP-20, https://www.nxp.com/docs/en/package-information/98ASA00676D.pdf +WLCSP-20 +0 +20 +20 +Package_CSP +WLCSP-36_2.82x2.67mm_Layout6x6_P0.4mm +WLCSP-36, https://www.nxp.com/docs/en/package-information/98ASA00949D.pdf +WLCSP-36 +0 +36 +36 +Package_CSP +WLCSP-36_2.374x2.459mm_Layout6x6_P0.35mm +WLCSP-36, https://www.nxp.com/docs/en/package-information/98ASA00604D.pdf +WLCSP-36 +0 +36 +36 +Package_CSP +WLCSP-56_3.170x3.444mm_Layout7x8_P0.4mm +WLCSP-56, 7x8 raster, 3.170x3.444mm package, pitch 0.4mm; see section 48.2.4 of http://ww1.microchip.com/downloads/en/DeviceDoc/DS60001479B.pdf +BGA 56 0.4 +0 +56 +56 +Package_CSP +WLCSP-81_4.41x3.76mm_P0.4mm +WLCSP-81, 9x9, 0.4mm Pitch, http://www.st.com/content/ccc/resource/technical/document/technical_note/92/30/3c/a1/4c/bb/43/6f/DM00103228.pdf/files/DM00103228.pdf/jcr:content/translations/en.DM00103228.pdf +WLCSP ST +0 +81 +81 +Package_CSP +pSemi_CSP-16_1.64x2.04mm_P0.4mm +pSemi CSP-16 1.64x2.04x0.285mm (http://www.psemi.com/pdf/datasheets/pe29101ds.pdf, http://www.psemi.com/pdf/app_notes/an77.pdf) +psemi csp 16 +0 +16 +16 +Package_CSP +pSemi_CSP-16_1.64x2.04mm_P0.4mm_Pad0.18mm +pSemi CSP-16 1.64x2.04x0.285mm (http://www.psemi.com/pdf/datasheets/pe29101ds.pdf, http://www.psemi.com/pdf/app_notes/an77.pdf) +psemi csp 16 +0 +16 +16 +Package_DFN_QFN +AMS_QFN-4-1EP_2x2mm_P0.95mm_EP0.7x1.6mm +UFD Package, 4-Lead Plastic QFN (2mm x 2mm), http://ams.com/eng/content/download/950231/2267959/483138 +QFN 0.95 +0 +6 +5 +Package_DFN_QFN +AO_DFN-8-1EP_5.55x5.2mm_P1.27mm_EP4.12x4.6mm +DD Package; 8-Lead Plastic DFN (5.55mm x 5.2mm), Pin 5-8 connected to EP (http://www.aosmd.com/res/packaging_information/DFN5x6_8L_EP1_P.pdf) +dfn +0 +25 +5 +Package_DFN_QFN +Cypress_QFN-56-1EP_8x8mm_P0.5mm_EP6.22x6.22mm_ThermalVias +56-Lead Plastic Quad Flat, No Lead Package (ML) - 8x8x0.9 mm Body [QFN] (see datasheet at http://www.cypress.com/file/138911/download and app note at http://www.cypress.com/file/140006/download) +QFN 0.5 +0 +87 +57 +Package_DFN_QFN +DFN-6-1EP_1.2x1.2mm_P0.4mm_EP0.3x0.94mm_PullBack +DFN, 6 Pin (http://www.onsemi.com/pub/Collateral/NCP133-D.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py +DFN NoLead +0 +9 +7 +Package_DFN_QFN +DFN-6-1EP_2x1.6mm_P0.5mm_EP1.15x1.3mm +DFN, 6 Pin (https://www.onsemi.com/pdf/datasheet/ncp349-d.pdf#page=12), generated with kicad-footprint-generator ipc_noLead_generator.py +DFN NoLead +0 +9 +7 +Package_DFN_QFN +DFN-6-1EP_2x1.8mm_P0.5mm_EP1.2x1.6mm +DFN, 6 Pin (https://www.diodes.com/assets/Package-Files/U-DFN2018-6.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +DFN NoLead +0 +11 +7 +Package_DFN_QFN +DFN-6-1EP_2x2mm_P0.5mm_EP0.6x1.37mm +DFN, 6 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-dfn/05081703_C_DC6.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +DFN NoLead +0 +9 +7 +Package_DFN_QFN +DFN-6-1EP_2x2mm_P0.5mm_EP0.61x1.42mm +DC6 Package; 6-Lead Plastic DFN (2mm x 2mm) (see Linear Technology DFN_6_05-08-1703.pdf) +DFN 0.5 +0 +9 +7 +Package_DFN_QFN +DFN-6-1EP_2x2mm_P0.65mm_EP1.01x1.7mm +DFN, 6 Pin (https://www.diodes.com/assets/Package-Files/U-DFN2020-6%20(Type%20C).pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +DFN NoLead +0 +9 +7 +Package_DFN_QFN +DFN-6-1EP_2x2mm_P0.65mm_EP1x1.6mm +6-Lead Plastic Dual Flat, No Lead Package (MA) - 2x2x0.9 mm Body [DFN] (see Microchip Packaging Specification 00000049BS.pdf) +DFN 0.65 +0 +9 +7 +Package_DFN_QFN +DFN-6-1EP_3x2mm_P0.5mm_EP1.65x1.35mm +DFN, 6 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-dfn/(DCB6)%20DFN%2005-08-1715%20Rev%20A.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +DFN NoLead +0 +11 +7 +Package_DFN_QFN +DFN-6-1EP_3x3mm_P0.95mm_EP1.7x2.6mm +DFN6 3*3 MM, 0.95 PITCH; CASE 506AH-01 (see ON Semiconductor 506AH.PDF) +DFN 0.95 +0 +13 +7 +Package_DFN_QFN +DFN-6-1EP_3x3mm_P1mm_EP1.5x2.4mm +DFN, 6 Pin (https://www.silabs.com/documents/public/data-sheets/Si7020-A20.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +DFN NoLead +0 +11 +7 +Package_DFN_QFN +DFN-6_1.3x1.2mm_P0.4mm +6-Lead Plastic DFN (1.3mm x 1.2mm) +DFN 0.4 +0 +6 +6 +Package_DFN_QFN +DFN-8-1EP_2x2mm_P0.5mm_EP0.6x1.2mm +DFN, 8 Pin (https://www.qorvo.com/products/d/da001879), generated with kicad-footprint-generator ipc_noLead_generator.py +DFN NoLead +0 +11 +9 +Package_DFN_QFN +DFN-8-1EP_2x2mm_P0.5mm_EP0.7x1.3mm +DFN, 8 Pin (https://www.onsemi.com/pub/Collateral/NUF4401MN-D.PDF#page=6), generated with kicad-footprint-generator ipc_noLead_generator.py +DFN NoLead +0 +13 +9 +Package_DFN_QFN +DFN-8-1EP_2x2mm_P0.5mm_EP0.8x1.6mm +DFN, 8 Pin (https://www.qorvo.com/products/d/da007268), generated with kicad-footprint-generator ipc_noLead_generator.py +DFN NoLead +0 +10 +9 +Package_DFN_QFN +DFN-8-1EP_2x2mm_P0.5mm_EP0.9x1.3mm +DFN, 8 Pin (https://www.onsemi.com/pub/Collateral/NB3N551-D.PDF#page=7), generated with kicad-footprint-generator ipc_noLead_generator.py +DFN NoLead +0 +13 +9 +Package_DFN_QFN +DFN-8-1EP_2x2mm_P0.5mm_EP0.9x1.5mm +DFN, 8 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-8127-AVR-8-bit-Microcontroller-ATtiny4-ATtiny5-ATtiny9-ATtiny10_Datasheet.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +DFN NoLead +0 +13 +9 +Package_DFN_QFN +DFN-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm +DFN, 8 Pin (https://www.st.com/resource/en/datasheet/lm2903.pdf#page=16), generated with kicad-footprint-generator ipc_noLead_generator.py +DFN NoLead +0 +10 +9 +Package_DFN_QFN +DFN-8-1EP_2x2mm_P0.5mm_EP1.05x1.75mm +DFN8 2x2, 0.5P; CASE 506CN (see ON Semiconductor 506CN.PDF) +DFN 0.5 +0 +11 +9 +Package_DFN_QFN +DFN-8-1EP_2x2mm_P0.45mm_EP0.64x1.38mm +DC8 Package 8-Lead Plastic DFN (2mm x 2mm) (see Linear Technology DFN_8_05-08-1719.pdf) +DFN 0.45 +0 +11 +9 +Package_DFN_QFN +DFN-8-1EP_2x3mm_P0.5mm_EP0.56x2.15mm +DFN, 8 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/2451fg.pdf#page=17), generated with kicad-footprint-generator ipc_noLead_generator.py +DFN NoLead +0 +11 +9 +Package_DFN_QFN +DFN-8-1EP_2x3mm_P0.5mm_EP0.61x2.2mm +DDB Package; 8-Lead Plastic DFN (3mm x 2mm) (see Linear Technology DFN_8_05-08-1702.pdf) +DFN 0.5 +0 +12 +9 +Package_DFN_QFN +DFN-8-1EP_3x2mm_P0.5mm_EP1.3x1.5mm +8-Lead Plastic Dual Flat, No Lead Package (8MA2) - 2x3x0.6 mm Body [UDFN] (see Atmel-8815-SEEPROM-AT24CS01-02-Datasheet.pdf) +DFN 0.5 +0 +13 +9 +Package_DFN_QFN +DFN-8-1EP_3x2mm_P0.5mm_EP1.7x1.4mm +DFN, 8 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/8L_DFN_2x3x0_9_MC_C04-123C.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +DFN NoLead +0 +13 +9 +Package_DFN_QFN +DFN-8-1EP_3x2mm_P0.5mm_EP1.36x1.46mm +8-Lead Plastic Dual Flat, No Lead Package (8MA2) - 2x3x0.6 mm Body (http://ww1.microchip.com/downloads/en/DeviceDoc/20005010F.pdf) +DFN 0.5 +0 +13 +9 +Package_DFN_QFN +DFN-8-1EP_3x2mm_P0.5mm_EP1.75x1.45mm +8-Lead Plastic Dual Flat, No Lead Package (MC) - 2x3x0.9 mm Body [DFN] (see Microchip Packaging Specification 00000049BS.pdf) +DFN 0.5 +0 +13 +9 +Package_DFN_QFN +DFN-8-1EP_3x2mm_P0.45mm_EP1.66x1.36mm +DCB Package 8-Lead Plastic DFN (2mm x 3mm) (see Linear Technology DFN_8_05-08-1718.pdf) +DFN 0.45 +0 +13 +9 +Package_DFN_QFN +DFN-8-1EP_3x3mm_P0.5mm_EP1.65x2.38mm +DFN, 8 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/4320fb.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +DFN NoLead +0 +10 +9 +Package_DFN_QFN +DFN-8-1EP_3x3mm_P0.5mm_EP1.65x2.38mm_ThermalVias +DFN, 8 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/4320fb.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +DFN NoLead +0 +20 +9 +Package_DFN_QFN +DFN-8-1EP_3x3mm_P0.5mm_EP1.66x2.38mm +DD Package; 8-Lead Plastic DFN (3mm x 3mm) (see Linear Technology DFN_8_05-08-1698.pdf) +DFN 0.5 +0 +13 +9 +Package_DFN_QFN +DFN-8-1EP_3x3mm_P0.65mm_EP1.7x2.05mm +DFN, 8 Pin (http://www.ixysic.com/home/pdfs.nsf/www/IX4426-27-28.pdf/$file/IX4426-27-28.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +DFN NoLead +0 +13 +9 +Package_DFN_QFN +DFN-8-1EP_3x3mm_P0.65mm_EP1.55x2.4mm +8-Lead Plastic Dual Flat, No Lead Package (MF) - 3x3x0.9 mm Body [DFN] (see Microchip Packaging Specification 00000049BS.pdf) +DFN 0.65 +0 +13 +9 +Package_DFN_QFN +DFN-8-1EP_4x4mm_P0.8mm_EP2.3x3.24mm +DFN, 8 Pin (https://www.st.com/resource/en/datasheet/ld1086.pdf#page=35), generated with kicad-footprint-generator ipc_noLead_generator.py +DFN NoLead +0 +13 +9 +Package_DFN_QFN +DFN-8-1EP_4x4mm_P0.8mm_EP2.5x3.6mm +8-Lead Plastic Dual Flat, No Lead Package (MD) - 4x4x0.9 mm Body [DFN] (see Microchip Packaging Specification 00000049BS.pdf) +DFN 0.8 +0 +15 +9 +Package_DFN_QFN +DFN-8-1EP_4x4mm_P0.8mm_EP2.39x2.21mm +8-Lead Plastic Dual Flat, No Lead Package (MD) - 4x4x0.9 mm Body [DFN] (http://www.onsemi.com/pub/Collateral/NCP4308-D.PDF) +DFN 0.8 +0 +13 +9 +Package_DFN_QFN +DFN-8-1EP_6x5mm_P1.27mm_EP2x2mm +DD Package; 8-Lead Plastic DFN (6mm x 5mm) (see http://www.everspin.com/file/236/download) +dfn +0 +13 +9 +Package_DFN_QFN +DFN-8-1EP_6x5mm_P1.27mm_EP4x4mm +DD Package; 8-Lead Plastic DFN (6mm x 5mm) (see http://www.everspin.com/file/236/download) +dfn +0 +25 +9 +Package_DFN_QFN +DFN-8_2x2mm_P0.5mm +DFN8 2x2, 0.5P; No exposed pad - Ref http://pdfserv.maximintegrated.com/land_patterns/90-0349.PDF +DFN 0.5 +0 +8 +8 +Package_DFN_QFN +DFN-10-1EP_2.6x2.6mm_P0.5mm_EP1.3x2.2mm +DFN, 10 Pin (https://www.nxp.com/docs/en/data-sheet/PCF85063A.pdf#page=48), generated with kicad-footprint-generator ipc_noLead_generator.py +DFN NoLead +0 +15 +11 +Package_DFN_QFN +DFN-10-1EP_2.6x2.6mm_P0.5mm_EP1.3x2.2mm_ThermalVias +DFN, 10 Pin (https://www.nxp.com/docs/en/data-sheet/PCF85063A.pdf#page=48), generated with kicad-footprint-generator ipc_noLead_generator.py +DFN NoLead +0 +22 +11 +Package_DFN_QFN +DFN-10-1EP_2x3mm_P0.5mm_EP0.64x2.4mm +DDB Package; 10-Lead Plastic DFN (3mm x 2mm) (see Linear Technology DFN_10_05-08-1722.pdf) +DFN 0.5 +0 +13 +11 +Package_DFN_QFN +DFN-10-1EP_3x3mm_P0.5mm_EP1.7x2.5mm +DFN, 10 Pin (https://www.monolithicpower.com/pub/media/document/MPQ2483_r1.05.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +DFN NoLead +0 +15 +11 +Package_DFN_QFN +DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm +10-Lead Plastic Dual Flat, No Lead Package (MF) - 3x3x0.9 mm Body [DFN] (see Microchip Packaging Specification 00000049BS.pdf) +DFN 0.5 +0 +15 +11 +Package_DFN_QFN +DFN-10-1EP_3x3mm_P0.5mm_EP1.58x2.35mm +DFN, 10 Pin (https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/22005b.pdf#page=24), generated with kicad-footprint-generator ipc_noLead_generator.py +DFN NoLead +0 +15 +11 +Package_DFN_QFN +DFN-10-1EP_3x3mm_P0.5mm_EP1.58x2.35mm_ThermalVias +DFN, 10 Pin (https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/22005b.pdf#page=24), generated with kicad-footprint-generator ipc_noLead_generator.py +DFN NoLead +0 +20 +11 +Package_DFN_QFN +DFN-10-1EP_3x3mm_P0.5mm_EP1.65x2.38mm +DFN, 10 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/3471fb.pdf#page=15), generated with kicad-footprint-generator ipc_noLead_generator.py +DFN NoLead +0 +15 +11 +Package_DFN_QFN +DFN-10-1EP_3x3mm_P0.5mm_EP1.65x2.38mm_ThermalVias +DFN, 10 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/3471fb.pdf#page=15), generated with kicad-footprint-generator ipc_noLead_generator.py +DFN NoLead +0 +22 +11 +Package_DFN_QFN +DFN-10-1EP_3x3mm_P0.5mm_EP1.75x2.7mm +10-Lead Plastic Dual Flat No-Lead Package, 3x3mm Body (see Atmel Appnote 8826) +DFN 0.5 +0 +15 +11 +Package_DFN_QFN +DFN-10_2x2mm_P0.4mm +10-Lead Plastic DFN (2mm x 2mm) 0.40mm pitch +DFN 10 0.4mm +0 +10 +10 +Package_DFN_QFN +DFN-12-1EP_2x3mm_P0.45mm_EP0.64x2.4mm +DDB Package; 12-Lead Plastic DFN (3mm x 2mm) (see Linear Technology DFN_12_05-08-1723.pdf) +DFN 0.45 +0 +15 +13 +Package_DFN_QFN +DFN-12-1EP_3x3mm_P0.5mm_EP1.4x2.55mm +DFN, 12 Pin (https://www.st.com/resource/en/datasheet/st25dv04k.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +DFN NoLead +0 +14 +13 +Package_DFN_QFN +DFN-12-1EP_3x3mm_P0.5mm_EP1.6x2.5mm +DFN, 12 Pin (https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MIC2207-2MHz-3A-PWM-Buck-Regulator-DS20006470A.pdf#page=22), generated with kicad-footprint-generator ipc_noLead_generator.py +DFN NoLead +0 +17 +13 +Package_DFN_QFN +DFN-12-1EP_3x3mm_P0.5mm_EP1.6x2.5mm_ThermalVias +DFN, 12 Pin (https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MIC2207-2MHz-3A-PWM-Buck-Regulator-DS20006470A.pdf#page=22), generated with kicad-footprint-generator ipc_noLead_generator.py +DFN NoLead +0 +24 +13 +Package_DFN_QFN +DFN-12-1EP_3x3mm_P0.5mm_EP2.05x2.86mm +10-Lead Plastic Dual Flat, No Lead Package (MF) - 3x3x0.9 mm Body [DFN] (see Microchip Packaging Specification 00000049BS.pdf) +DFN 0.5 +0 +17 +13 +Package_DFN_QFN +DFN-12-1EP_3x3mm_P0.45mm_EP1.66x2.38mm +DD Package; 12-Lead Plastic DFN (3mm x 3mm) (see Linear Technology DFN_12_05-08-1725.pdf) +DFN 0.45 +0 +17 +13 +Package_DFN_QFN +DFN-12-1EP_3x4mm_P0.5mm_EP1.7x3.3mm +DE/UE Package; 12-Lead Plastic DFN (4mm x 3mm) (see Linear Technology DFN_12_05-08-1695.pdf) +DFN 0.5 +0 +21 +13 +Package_DFN_QFN +DFN-12-1EP_4x4mm_P0.5mm_EP2.66x3.38mm +DF Package; 12-Lead Plastic DFN (4mm x 4mm) (see Linear Technology 05081733_A_DF12.pdf) +DFN 0.5 +0 +21 +13 +Package_DFN_QFN +DFN-12-1EP_4x4mm_P0.65mm_EP2.64x3.54mm +DFN12, 4x4, 0.65P; CASE 506CE (see ON Semiconductor 506CE.PDF) +DFN 0.65 +0 +21 +13 +Package_DFN_QFN +DFN-14-1EP_3x3mm_P0.4mm_EP1.78x2.35mm +DD Package; 14-Lead Plastic DFN (3mm x 3mm) (http://pdfserv.maximintegrated.com/land_patterns/90-0063.PDF) +DFN 0.40 +0 +19 +15 +Package_DFN_QFN +DFN-14-1EP_3x4.5mm_P0.65mm_EP1.65x4.25mm +14-lead very thin plastic quad flat, 3.0x4.5mm size, 0.65mm pitch (http://ww1.microchip.com/downloads/en/DeviceDoc/14L_VDFN_4_5x3_0mm_JHA_C041198A.pdf) +VDFN DFN 0.65mm +0 +23 +15 +Package_DFN_QFN +DFN-14-1EP_3x4.5mm_P0.65mm_EP1.65x4.25mm_ThermalVias +14-lead very thin plastic quad flat, 3.0x4.5mm size, 0.65mm pitch (http://ww1.microchip.com/downloads/en/DeviceDoc/14L_VDFN_4_5x3_0mm_JHA_C041198A.pdf) +VDFN DFN 0.65mm +0 +33 +15 +Package_DFN_QFN +DFN-14-1EP_3x4mm_P0.5mm_EP1.7x3.3mm +DE Package; 14-Lead Plastic DFN (4mm x 3mm) (see Linear Technology DFN_14_05-08-1708.pdf) +DFN 0.5 +0 +23 +15 +Package_DFN_QFN +DFN-14-1EP_4x4mm_P0.5mm_EP2.86x3.6mm +DFN14, 4x4, 0.5P; CASE 506CM (see ON Semiconductor 506CM.PDF) +DFN 0.5 +0 +23 +15 +Package_DFN_QFN +DFN-14_1.35x3.5mm_P0.5mm +DFN, 14 Pin (https://m.littelfuse.com/~/media/electronics/datasheets/tvs_diode_arrays/littelfuse_tvs_diode_array_sp3012_datasheet.pdf.pdf#page=7), generated with kicad-footprint-generator ipc_noLead_generator.py +DFN NoLead +0 +14 +14 +Package_DFN_QFN +DFN-16-1EP_3x4mm_P0.45mm_EP1.7x3.3mm +DE Package; 16-Lead Plastic DFN (4mm x 3mm) (see Linear Technology DFN_16_05-08-1732.pdf) +DFN 0.45 +0 +25 +17 +Package_DFN_QFN +DFN-16-1EP_3x5mm_P0.5mm_EP1.66x4.4mm +DHC Package; 16-Lead Plastic DFN (5mm x 3mm) (see Linear Technology DFN_16_05-08-1706.pdf) +DFN 0.5 +0 +27 +17 +Package_DFN_QFN +DFN-16-1EP_4x5mm_P0.5mm_EP2.44x4.34mm +DHD Package; 16-Lead Plastic DFN (5mm x 4mm) (see Linear Technology 05081707_A_DHD16.pdf) +DFN 0.5 +0 +25 +17 +Package_DFN_QFN +DFN-16-1EP_5x5mm_P0.5mm_EP3.46x4mm +DH Package; 16-Lead Plastic DFN (5mm x 5mm) (see Linear Technology DFN_16_05-08-1709.pdf) +DFN 0.5 +0 +26 +17 +Package_DFN_QFN +DFN-18-1EP_3x5mm_P0.5mm_EP1.66x4.4mm +DHC Package; 18-Lead Plastic DFN (5mm x 3mm) (see Linear Technology 05081955_0_DHC18.pdf) +DFN 0.5 +0 +29 +19 +Package_DFN_QFN +DFN-18-1EP_4x5mm_P0.5mm_EP2.44x4.34mm +DHD Package; 18-Lead Plastic DFN (5mm x 4mm) (see Linear Technology DFN_18_05-08-1778.pdf) +DFN 0.5 +0 +27 +19 +Package_DFN_QFN +DFN-20-1EP_5x6mm_P0.5mm_EP3.24x4.24mm +DFN20, 6x5, 0.5P; CASE 505AB (see ON Semiconductor 505AB.PDF) +DFN 0.5 +0 +33 +21 +Package_DFN_QFN +DFN-22-1EP_5x6mm_P0.5mm_EP3.14x4.3mm +DFN22 6*5*0.9 MM, 0.5 P; CASE 506AF\xe2\x88\x9201 (see ON Semiconductor 506AF.PDF) +DFN 0.5 +0 +35 +23 +Package_DFN_QFN +DFN-24-1EP_4x7mm_P0.5mm_EP2.64x6.44mm +DKD Package; 24-Lead Plastic DFN (7mm x 4mm) (see Linear Technology DFN_24_05-08-1864.pdf) +DFN 0.5 +0 +35 +25 +Package_DFN_QFN +DFN-32-1EP_4x7mm_P0.4mm_EP2.64x6.44mm +DKD Package; 32-Lead Plastic DFN (7mm x 4mm) (see Linear Technology DFN_32_05-08-1734.pdf) +DFN 0.4 +0 +43 +33 +Package_DFN_QFN +DFN-44-1EP_5x8.9mm_P0.4mm_EP3.7x8.4mm +DFN44 8.9x5, 0.4P; CASE 506BU-01 (see ON Semiconductor 506BU.PDF) +DFN 0.4 +0 +63 +45 +Package_DFN_QFN +DFN-S-8-1EP_6x5mm_P1.27mm +8-Lead Plastic Dual Flat, No Lead Package (MF) - 6x5 mm Body [DFN-S] (see Microchip Packaging Specification 00000049BS.pdf) +DFN 1.27 +0 +16 +9 +Package_DFN_QFN +DHVQFN-14-1EP_2.5x3mm_P0.5mm_EP1x1.5mm +DHVQFN, 14 Pin (JEDEC MO-241/VAA, https://assets.nexperia.com/documents/package-information/SOT762-1.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +DHVQFN NoLead +0 +16 +15 +Package_DFN_QFN +DHVQFN-16-1EP_2.5x3.5mm_P0.5mm_EP1x2mm +DHVQFN, 16 Pin (JEDEC MO-241/VAB, https://assets.nexperia.com/documents/package-information/SOT763-1.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +DHVQFN NoLead +0 +19 +17 +Package_DFN_QFN +DHVQFN-20-1EP_2.5x4.5mm_P0.5mm_EP1x3mm +DHVQFN, 20 Pin (JEDEC MO-241/VAC, https://assets.nexperia.com/documents/package-information/SOT764-1.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +DHVQFN NoLead +0 +23 +21 +Package_DFN_QFN +Diodes_DFN1006-3 +DFN package size 1006 3 pins +DFN package size 1006 3 pins +0 +3 +3 +Package_DFN_QFN +Diodes_UDFN-10_1.0x2.5mm_P0.5mm +U-DFN2510-10 package used by Diodes Incorporated (https://www.diodes.com/assets/Package-Files/U-DFN2510-10-Type-CJ.pdf) +UDFN-10 U-DFN2510-10 Diodes +0 +10 +10 +Package_DFN_QFN +Diodes_UDFN2020-6_Type-F +U-DFN2020-6 (Type F) (https://www.diodes.com/assets/Package-Files/U-DFN2020-6-Type-F.pdf) +U-DFN2020-6 (Type F) +0 +8 +8 +Package_DFN_QFN +HVQFN-16-1EP_3x3mm_P0.5mm_EP1.5x1.5mm +HVQFN, 16 Pin (https://www.nxp.com/docs/en/package-information/SOT758-1.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +HVQFN NoLead +0 +21 +17 +Package_DFN_QFN +HVQFN-24-1EP_4x4mm_P0.5mm_EP2.1x2.1mm +HVQFN, 24 Pin (https://www.nxp.com/docs/en/package-information/SOT616-1.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +HVQFN NoLead +0 +34 +25 +Package_DFN_QFN +HVQFN-24-1EP_4x4mm_P0.5mm_EP2.5x2.5mm +HVQFN, 24 Pin (https://www.nxp.com/docs/en/package-information/SOT616-3.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +HVQFN NoLead +0 +29 +25 +Package_DFN_QFN +HVQFN-24-1EP_4x4mm_P0.5mm_EP2.5x2.5mm_ThermalVias +HVQFN, 24 Pin (https://www.nxp.com/docs/en/package-information/SOT616-3.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +HVQFN NoLead +0 +39 +25 +Package_DFN_QFN +HVQFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm +HVQFN, 24 Pin (https://www.nxp.com/docs/en/package-information/SOT616-3.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +HVQFN NoLead +0 +34 +25 +Package_DFN_QFN +HVQFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm_ThermalVias +HVQFN, 24 Pin (https://www.nxp.com/docs/en/package-information/SOT616-3.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +HVQFN NoLead +0 +39 +25 +Package_DFN_QFN +HVQFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm +HVQFN, 32 Pin (https://www.nxp.com/docs/en/package-information/SOT617-1.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +HVQFN NoLead +0 +42 +33 +Package_DFN_QFN +HVQFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm_ThermalVias +HVQFN, 32 Pin (https://www.nxp.com/docs/en/package-information/SOT617-1.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +HVQFN NoLead +0 +59 +33 +Package_DFN_QFN +HVQFN-40-1EP_6x6mm_P0.5mm_EP4.1x4.1mm +HVQFN, 40 Pin (https://www.nxp.com/docs/en/package-information/SOT618-1.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +HVQFN NoLead +0 +50 +41 +Package_DFN_QFN +HVQFN-40-1EP_6x6mm_P0.5mm_EP4.1x4.1mm_ThermalVias +HVQFN, 40 Pin (https://www.nxp.com/docs/en/package-information/SOT618-1.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +HVQFN NoLead +0 +67 +41 +Package_DFN_QFN +Infineon_MLPQ-16-14-1EP_4x4mm_P0.5mm +MLPQ 32 leads, 7x7mm, 0.127mm stencil (https://www.infineon.com/dgdl/Infineon-AN1170-AN-v05_00-EN.pdf?fileId=5546d462533600a40153559ac3e51134) +mlpq 32 7x7mm +0 +19 +15 +Package_DFN_QFN +Infineon_MLPQ-40-32-1EP_7x7mm_P0.5mm +MLPQ 32 leads, 7x7mm, 0.127mm stencil (https://www.infineon.com/dgdl/Infineon-AN1170-AN-v05_00-EN.pdf?fileId=5546d462533600a40153559ac3e51134) +mlpq 32 7x7mm +0 +76 +33 +Package_DFN_QFN +Infineon_MLPQ-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm +MLPQ 48 leads, 7x7mm (https://www.infineon.com/dgdl/irs2052mpbf.pdf?fileId=5546d462533600a401535675d3b32788) +mlpq 32 7x7mm +0 +115 +49 +Package_DFN_QFN +Infineon_MLPQ-48-1EP_7x7mm_P0.5mm_EP5.55x5.55mm +MLPQ 48 leads, 7x7mm (https://www.infineon.com/dgdl/irs2093mpbf.pdf?fileId=5546d462533600a401535675fb892793) +mlpq 32 7x7mm +0 +113 +49 +Package_DFN_QFN +Infineon_PQFN-22-15-4EP_6x5mm_P0.65mm +PQFN 22 leads, 5x6mm, 0.127mm stencil (https://www.infineon.com/dgdl/ir4301.pdf?fileId=5546d462533600a4015355d5fc691819, https://www.infineon.com/dgdl/Infineon-AN1170-AN-v05_00-EN.pdf?fileId=5546d462533600a40153559ac3e51134) +pqfn 22 5x6mm +0 +56 +15 +Package_DFN_QFN +Infineon_PQFN-44-31-5EP_7x7mm_P0.5mm +PQFN 44 leads, 7x7mm, 0.127mm stencil (https://www.infineon.com/dgdl/ir4302.pdf?fileId=5546d462533600a4015355d602a9181d, https://www.infineon.com/dgdl/Infineon-AN1170-AN-v05_00-EN.pdf?fileId=5546d462533600a40153559ac3e51134) +pqfn 44 7x7mm +0 +125 +27 +Package_DFN_QFN +LQFN-10-1EP_2x2mm_P0.5mm_EP0.7x0.7mm +LQFN, 10 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-lqfn/05081644_0_LQFN10.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LQFN NoLead +0 +12 +11 +Package_DFN_QFN +LQFN-12-1EP_2x2mm_P0.5mm_EP0.7x0.7mm +LQFN, 12 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-lqfn/05081530_B_LQFN12.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LQFN NoLead +0 +14 +13 +Package_DFN_QFN +LQFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm +LQFN, 16 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-lqfn/05081595_0_lqfn16.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LQFN NoLead +0 +18 +17 +Package_DFN_QFN +Linear_DE14MA +14-Lead Plastic DFN, 4mm x 3mm (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-dfn/05081731_C_DE14MA.pdf) +DFN 0.5 +0 +14 +14 +Package_DFN_QFN +Linear_UGK52_QFN-46-52 +Linear UKG52(46) package, QFN-52-1EP variant (see http://cds.linear.com/docs/en/datasheet/3886fe.pdf) +QFN 0.5 +0 +62 +47 +Package_DFN_QFN +MLF-6-1EP_1.6x1.6mm_P0.5mm_EP0.5x1.26mm +MLF, 6 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/mic5353.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +MLF NoLead +0 +9 +7 +Package_DFN_QFN +MLF-8-1EP_3x3mm_P0.65mm_EP1.55x2.3mm +8-Pin ePad 3mm x 3mm MLF - 3x3x0.85 mm Body (see Microchip datasheet http://ww1.microchip.com/downloads/en/DeviceDoc/mic5355_6.pdf) +DFN MLF 0.65 +0 +12 +9 +Package_DFN_QFN +MLF-8-1EP_3x3mm_P0.65mm_EP1.55x2.3mm_ThermalVias +8-Pin ePad 3mm x 3mm MLF - 3x3x0.85 mm Body (see Microchip datasheet http://ww1.microchip.com/downloads/en/DeviceDoc/mic5355_6.pdf) +DFN MLF 0.65 +0 +15 +9 +Package_DFN_QFN +MLF-20-1EP_4x4mm_P0.5mm_EP2.6x2.6mm +MLF, 20 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/doc8246.pdf#page=263), generated with kicad-footprint-generator ipc_noLead_generator.py +MLF NoLead +0 +25 +21 +Package_DFN_QFN +MLF-20-1EP_4x4mm_P0.5mm_EP2.6x2.6mm_ThermalVias +MLF, 20 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/doc8246.pdf#page=263), generated with kicad-footprint-generator ipc_noLead_generator.py +MLF NoLead +0 +30 +21 +Package_DFN_QFN +MLPQ-16-1EP_4x4mm_P0.65mm_EP2.8x2.8mm +Micro Leadframe Package, 16 pin with exposed pad +MLPQ- 0.65 +0 +21 +17 +Package_DFN_QFN +Maxim_TDFN-6-1EP_3x3mm_P0.95mm_EP1.5x2.3mm +Maxim TDFN, 6 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/MAX4460-MAX4462.pdf#page=19, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/tdfn-ep/21-0137.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +Maxim TDFN NoLead +0 +11 +7 +Package_DFN_QFN +Maxim_TDFN-12-1EP_3x3mm_P0.5mm_EP1.7x2.5mm +Maxim TDFN, 12 Pin (https://www.analog.com/media/en/package-pcb-resources/land-pattern/tdfn/90-0397.pdf) +DFN NoLead +0 +17 +13 +Package_DFN_QFN +Maxim_TDFN-12-1EP_3x3mm_P0.5mm_EP1.7x2.5mm_ThermalVias +Maxim TDFN, 12 Pin (https://www.analog.com/media/en/package-pcb-resources/land-pattern/tdfn/90-0397.pdf) +DFN NoLead +0 +23 +13 +Package_DFN_QFN +Micrel_MLF-8-1EP_2x2mm_P0.5mm_EP0.6x1.2mm +Micrel MLF, 8 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/mic23050.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +Micrel MLF NoLead +0 +11 +9 +Package_DFN_QFN +Micrel_MLF-8-1EP_2x2mm_P0.5mm_EP0.6x1.2mm_ThermalVias +Micrel MLF, 8 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/mic23050.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +Micrel MLF NoLead +0 +16 +9 +Package_DFN_QFN +Micrel_MLF-8-1EP_2x2mm_P0.5mm_EP0.8x1.3mm_ThermalVias +http://ww1.microchip.com/downloads/en/DeviceDoc/mic2290.pdf +mlf 8 2x2 mm +0 +14 +9 +Package_DFN_QFN +Microchip_8E-16 +16-Lead Quad Flat, No Lead Package (8E) - 4x4x0.9 mm Body [UQFN]; (see Microchip Packaging Specification 00000049BS.pdf) +QFN Microchip 8E 16 +0 +20 +17 +Package_DFN_QFN +Microchip_DRQFN-44-1EP_5x5mm_P0.7mm_EP2.65x2.65mm +QFN, 44 Pin, dual row (http://ww1.microchip.com/downloads/en/DeviceDoc/44L_VQFN_5x5mm_Dual_Row_%5BS3B%5D_C04-21399a.pdf) +QFN dual row +0 +49 +45 +Package_DFN_QFN +Microchip_DRQFN-44-1EP_5x5mm_P0.7mm_EP2.65x2.65mm_ThermalVias +QFN, 44 Pin, dual row (http://ww1.microchip.com/downloads/en/DeviceDoc/44L_VQFN_5x5mm_Dual_Row_%5BS3B%5D_C04-21399a.pdf) +QFN dual row +0 +59 +45 +Package_DFN_QFN +Microchip_DRQFN-64-1EP_7x7mm_P0.65mm_EP4.1x4.1mm +QFN, 64 Pin, dual row (http://ww1.microchip.com/downloads/en/DeviceDoc/64L_VQFN_7x7_Dual_Row_%5BSVB%5D_C04-21420a.pdf) +QFN dual row +0 +74 +65 +Package_DFN_QFN +Microchip_DRQFN-64-1EP_7x7mm_P0.65mm_EP4.1x4.1mm_ThermalVias +QFN, 64 Pin, dual row (http://ww1.microchip.com/downloads/en/DeviceDoc/64L_VQFN_7x7_Dual_Row_%5BSVB%5D_C04-21420a.pdf) +QFN dual row +0 +91 +65 +Package_DFN_QFN +Microsemi_QFN-40-32-2EP_6x8mm_P0.5mm +40-Lead (32-Lead Populated) Plastic Quad Flat, No Lead Package - 6x8x0.9mm Body (https://www.microsemi.com/document-portal/doc_download/131677-pd70224-data-sheet) +QFN 0.5 +0 +92 +34 +Package_DFN_QFN +Mini-Circuits_DL805 +https://ww2.minicircuits.com/case_style/DL805.pdf +RF Switch +0 +11 +9 +Package_DFN_QFN +Mini-Circuits_FG873-4_3x3mm +Mini Circuits Case style FG (https://ww2.minicircuits.com/case_style/FG873.pdf) +FG873 +0 +4 +4 +Package_DFN_QFN +NXP_LQFN-48-1EP_7x7mm_P0.5mm_EP3.5x3.5mm_16xMask0.45x0.45 +LQFN, 48 Pin (https://www.nxp.com/docs/en/package-information/98ASA00694D.pdf) +NXP LQFN NoLead +0 +65 +49 +Package_DFN_QFN +NXP_LQFN-48-1EP_7x7mm_P0.5mm_EP3.5x3.5mm_16xMask0.45x0.45_ThermalVias +LQFN, 48 Pin (https://www.nxp.com/docs/en/package-information/98ASA00694D.pdf) +NXP LQFN NoLead +0 +75 +49 +Package_DFN_QFN +Nordic_AQFN-73-1EP_7x7mm_P0.5mm +http://infocenter.nordicsemi.com/index.jsp?topic=%2Fcom.nordic.infocenter.nrf52%2Fdita%2Fnrf52%2Fchips%2Fnrf52840.html +AQFN 7mm +0 +78 +74 +Package_DFN_QFN +Nordic_AQFN-94-1EP_7x7mm_P0.4mm +aQFN, Nordic, nRF5340, https://infocenter.nordicsemi.com/pdf/nRF5340_PS_v1.2.pdf +aqfn qfn nordic nrf nrf5340 aqfn94 +0 +103 +95 +Package_DFN_QFN +OnSemi_DFN-8_2x2mm_P0.5mm +DFN8 2x2, 0.5P (https://www.onsemi.com/pub/Collateral/511AT.PDF) +DFN 0.5 +0 +8 +8 +Package_DFN_QFN +OnSemi_SIP-38-6EP-9x7mm_P0.65mm_EP1.2x1.2mm +On Semiconductor, SIP-38, 9x7mm, (https://www.onsemi.com/pub/Collateral/AX-SIP-SFEU-D.PDF#page=19) +On Semiconductor SIP +0 +44 +44 +Package_DFN_QFN +OnSemi_UDFN-8_1.2x1.8mm_P0.4mm +8-Lead Plastic Dual Flat, No Lead Package, 1.2x1.8x1.55 mm Body [UDFN] (See http://www.onsemi.com/pub/Collateral/NLSV2T244-D.PDF) +dfn udfn dual flat +0 +8 +8 +Package_DFN_QFN +OnSemi_VCT-28_3.5x3.5mm_P0.4mm +OnSemi VCT, 28 Pin (http://www.onsemi.com/pub/Collateral/601AE.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py +OnSemi VCT NoLead +0 +28 +28 +Package_DFN_QFN +OnSemi_XDFN-10_1.35x2.2mm_P0.4mm +10-Lead Plastic XDFN (1.35mm x 2.2mm) (see https://www.onsemi.com/pdf/datasheet/emi8132-d.pdf) +OnSemi XDFN-10 0.4 +0 +10 +10 +Package_DFN_QFN +OnSemi_XDFN4-1EP_1.0x1.0mm_EP0.52x0.52mm +XDFN4 footprint (as found on the https://www.onsemi.com/pub/Collateral/NCP115-D.PDF) +OnSemi XDFN4 +0 +5 +5 +Package_DFN_QFN +PQFN-8-EP_6x5mm_P1.27mm_Generic +Universal Footprint for Thermally-enhanced SO-8 packages; compatible with Vishay PowerPAK SO−8, International Rectifier PQFN, Texas Instrument SON 5 × 6 mm (Q5A), Alpha and Omega DFN 5 × 6, ST Microelectronics PowerFLAT™ 5 × 6, Toshiba SOP Advance, Infineon Super SO8, NXP LFPAK (SOT669), Renesas WPAK(3F) / LFPAK, Fairchild Power 56, APEC PMPAK 5 × 6, MagnaChip PowerDFN56, ROHM HSOP8, UBIQ PRPAK56, NIKO−SEM PDFN 5 × 6, NEC 8-pin HVSON. Datasheets: https://www.onsemi.com/pub/Collateral/AND9137-D.PDF, https://assets.nexperia.com/documents/leaflet/75016838.pdf +Thermally-enhanced SO-8 PowerPAK PQFN Q5A PowerFLAT LFPAK SOT669 WPAK(3F) LFPAK Power56 PMPAK PowerDFN56 HSOP8 PRPAK56 PDFN HVSON +0 +21 +5 +Package_DFN_QFN +Panasonic_HQFN-16-1EP_4x4mm_P0.65mm_EP2.9x2.9mm +Panasonic HQFN-16, 4x4x0.85mm (https://industrial.panasonic.com/content/data/SC/ds/ds7/c0/PKG_HQFN016-A-0404XZL_EN.pdf) +panasonic hqfn +0 +37 +17 +Package_DFN_QFN +Panasonic_HSON-8_8x8mm_P2.00mm +Panasonic HSON-8, 8x8x1.25mm (https://industrial.panasonic.com/content/data/SC/ds/ds7/c0/PKG_HSON008-A-0808XXI_EN.pdf) +panasonic hson +0 +27 +9 +Package_DFN_QFN +QFN-12-1EP_3x3mm_P0.5mm_EP1.6x1.6mm +QFN, 12 Pin (https://www.nxp.com/docs/en/data-sheet/MMZ09332B.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +17 +13 +Package_DFN_QFN +QFN-12-1EP_3x3mm_P0.5mm_EP1.6x1.6mm_ThermalVias +QFN, 12 Pin (https://www.nxp.com/docs/en/data-sheet/MMZ09332B.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +32 +13 +Package_DFN_QFN +QFN-12-1EP_3x3mm_P0.5mm_EP1.65x1.65mm +QFN, 12 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_12_%2005-08-1855.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +17 +13 +Package_DFN_QFN +QFN-12-1EP_3x3mm_P0.5mm_EP1.65x1.65mm_ThermalVias +QFN, 12 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_12_%2005-08-1855.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +22 +13 +Package_DFN_QFN +QFN-12-1EP_3x3mm_P0.51mm_EP1.45x1.45mm +QFN, 12 Pin (https://ww2.minicircuits.com/case_style/DQ1225.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +17 +13 +Package_DFN_QFN +QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm +QFN, 16 Pin (https://www.st.com/resource/en/datasheet/tsv521.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +21 +17 +Package_DFN_QFN +QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm_ThermalVias +QFN, 16 Pin (http://www.cypress.com/file/46236/download), generated with kicad-footprint-generator ipc_dfn_qfn_generator.py +QFN DFN_QFN +0 +31 +17 +Package_DFN_QFN +QFN-16-1EP_3x3mm_P0.5mm_EP1.9x1.9mm +QFN, 16 Pin (https://www.nxp.com/docs/en/package-information/98ASA00525D.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +21 +17 +Package_DFN_QFN +QFN-16-1EP_3x3mm_P0.5mm_EP1.9x1.9mm_ThermalVias +QFN, 16 Pin (https://www.nxp.com/docs/en/package-information/98ASA00525D.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +26 +17 +Package_DFN_QFN +QFN-16-1EP_3x3mm_P0.5mm_EP1.45x1.45mm +QFN, 16 Pin (http://cds.linear.com/docs/en/datasheet/37551fd.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +21 +17 +Package_DFN_QFN +QFN-16-1EP_3x3mm_P0.5mm_EP1.45x1.45mm_ThermalVias +QFN, 16 Pin (http://cds.linear.com/docs/en/datasheet/37551fd.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +26 +17 +Package_DFN_QFN +QFN-16-1EP_3x3mm_P0.5mm_EP1.75x1.75mm +QFN, 16 Pin (https://www.onsemi.com/pub/Collateral/NCN4555-D.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +21 +17 +Package_DFN_QFN +QFN-16-1EP_3x3mm_P0.5mm_EP1.75x1.75mm_ThermalVias +QFN, 16 Pin (https://www.onsemi.com/pub/Collateral/NCN4555-D.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +26 +17 +Package_DFN_QFN +QFN-16-1EP_4x4mm_P0.5mm_EP2.45x2.45mm +QFN, 16 Pin (https://www.renesas.com/eu/en/www/doc/datasheet/isl8117.pdf#page=22), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +21 +17 +Package_DFN_QFN +QFN-16-1EP_4x4mm_P0.5mm_EP2.45x2.45mm_ThermalVias +QFN, 16 Pin (https://www.renesas.com/eu/en/www/doc/datasheet/isl8117.pdf#page=22), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +31 +17 +Package_DFN_QFN +QFN-16-1EP_4x4mm_P0.65mm_EP2.1x2.1mm +QFN, 16 Pin (http://www.thatcorp.com/datashts/THAT_1580_Datasheet.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +21 +17 +Package_DFN_QFN +QFN-16-1EP_4x4mm_P0.65mm_EP2.1x2.1mm_ThermalVias +QFN, 16 Pin (http://www.thatcorp.com/datashts/THAT_1580_Datasheet.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +31 +17 +Package_DFN_QFN +QFN-16-1EP_4x4mm_P0.65mm_EP2.5x2.5mm +QFN, 16 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=266), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +21 +17 +Package_DFN_QFN +QFN-16-1EP_4x4mm_P0.65mm_EP2.5x2.5mm_ThermalVias +QFN, 16 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=266), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +31 +17 +Package_DFN_QFN +QFN-16-1EP_4x4mm_P0.65mm_EP2.7x2.7mm +QFN, 16 Pin (https://www.allegromicro.com/~/media/Files/Datasheets/A4403-Datasheet.ashx), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +21 +17 +Package_DFN_QFN +QFN-16-1EP_4x4mm_P0.65mm_EP2.7x2.7mm_PullBack +QFN, 16 Pin (https://ams.com/documents/20143/36005/AS5055A_DS000304_2-00.pdf#page=24), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +21 +17 +Package_DFN_QFN +QFN-16-1EP_4x4mm_P0.65mm_EP2.7x2.7mm_PullBack_ThermalVias +QFN, 16 Pin (https://ams.com/documents/20143/36005/AS5055A_DS000304_2-00.pdf#page=24), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +31 +17 +Package_DFN_QFN +QFN-16-1EP_4x4mm_P0.65mm_EP2.7x2.7mm_ThermalVias +QFN, 16 Pin (https://www.allegromicro.com/~/media/Files/Datasheets/A4403-Datasheet.ashx), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +31 +17 +Package_DFN_QFN +QFN-16-1EP_4x4mm_P0.65mm_EP2.15x2.15mm +QFN, 16 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/4001f.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +21 +17 +Package_DFN_QFN +QFN-16-1EP_4x4mm_P0.65mm_EP2.15x2.15mm_ThermalVias +QFN, 16 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/4001f.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +31 +17 +Package_DFN_QFN +QFN-16-1EP_5x5mm_P0.8mm_EP2.7x2.7mm +QFN, 16 Pin (http://www.intersil.com/content/dam/Intersil/documents/l16_/l16.5x5.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +21 +17 +Package_DFN_QFN +QFN-16-1EP_5x5mm_P0.8mm_EP2.7x2.7mm_ThermalVias +QFN, 16 Pin (http://www.intersil.com/content/dam/Intersil/documents/l16_/l16.5x5.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +31 +17 +Package_DFN_QFN +QFN-20-1EP_3.5x3.5mm_P0.5mm_EP2x2mm +QFN, 20 Pin (http://www.ti.com/lit/ml/mpqf239/mpqf239.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +25 +21 +Package_DFN_QFN +QFN-20-1EP_3.5x3.5mm_P0.5mm_EP2x2mm_ThermalVias +QFN, 20 Pin (http://www.ti.com/lit/ml/mpqf239/mpqf239.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +30 +21 +Package_DFN_QFN +QFN-20-1EP_3x3mm_P0.4mm_EP1.65x1.65mm +QFN, 20 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/3553fc.pdf#page=34), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +25 +21 +Package_DFN_QFN +QFN-20-1EP_3x3mm_P0.4mm_EP1.65x1.65mm_ThermalVias +QFN, 20 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/3553fc.pdf#page=34), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +30 +21 +Package_DFN_QFN +QFN-20-1EP_3x3mm_P0.45mm_EP1.6x1.6mm +QFN, 20 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/atmel-8235-8-bit-avr-microcontroller-attiny20_datasheet.pdf#page=212), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +25 +21 +Package_DFN_QFN +QFN-20-1EP_3x3mm_P0.45mm_EP1.6x1.6mm_ThermalVias +QFN, 20 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/atmel-8235-8-bit-avr-microcontroller-attiny20_datasheet.pdf#page=212), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +30 +21 +Package_DFN_QFN +QFN-20-1EP_3x4mm_P0.5mm_EP1.65x2.65mm +QFN, 20 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_20_05-08-1742.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +25 +21 +Package_DFN_QFN +QFN-20-1EP_3x4mm_P0.5mm_EP1.65x2.65mm_ThermalVias +QFN, 20 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_20_05-08-1742.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +32 +21 +Package_DFN_QFN +QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm +QFN, 20 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=274), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +25 +21 +Package_DFN_QFN +QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm_ThermalVias +QFN, 20 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=274), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +30 +21 +Package_DFN_QFN +QFN-20-1EP_4x4mm_P0.5mm_EP2.6x2.6mm +QFN, 20 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/doc2535.pdf#page=164), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +25 +21 +Package_DFN_QFN +QFN-20-1EP_4x4mm_P0.5mm_EP2.6x2.6mm_ThermalVias +QFN, 20 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/doc2535.pdf#page=164), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +30 +21 +Package_DFN_QFN +QFN-20-1EP_4x4mm_P0.5mm_EP2.7x2.7mm +QFN, 20 Pin (https://www.silabs.com/documents/public/data-sheets/Si5351-B.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +25 +21 +Package_DFN_QFN +QFN-20-1EP_4x4mm_P0.5mm_EP2.7x2.7mm_ThermalVias +QFN, 20 Pin (https://www.silabs.com/documents/public/data-sheets/Si5351-B.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +30 +21 +Package_DFN_QFN +QFN-20-1EP_4x5mm_P0.5mm_EP2.65x3.65mm +QFN, 20 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_20_05-08-1711.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +27 +21 +Package_DFN_QFN +QFN-20-1EP_4x5mm_P0.5mm_EP2.65x3.65mm_ThermalVias +QFN, 20 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_20_05-08-1711.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +40 +21 +Package_DFN_QFN +QFN-20-1EP_5x5mm_P0.65mm_EP3.35x3.35mm +QFN, 20 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=276), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +25 +21 +Package_DFN_QFN +QFN-20-1EP_5x5mm_P0.65mm_EP3.35x3.35mm_ThermalVias +QFN, 20 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=276), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +35 +21 +Package_DFN_QFN +QFN-24-1EP_3x3mm_P0.4mm_EP1.75x1.6mm +QFN, 24 Pin (https://www.invensense.com/wp-content/uploads/2015/02/PS-MPU-9250A-01-v1.1.pdf#page=39), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +29 +25 +Package_DFN_QFN +QFN-24-1EP_3x3mm_P0.4mm_EP1.75x1.6mm_ThermalVias +QFN, 24 Pin (https://www.invensense.com/wp-content/uploads/2015/02/PS-MPU-9250A-01-v1.1.pdf#page=39), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +34 +25 +Package_DFN_QFN +QFN-24-1EP_3x4mm_P0.4mm_EP1.65x2.65mm +QFN, 24 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_20_05-08-1742.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +31 +25 +Package_DFN_QFN +QFN-24-1EP_3x4mm_P0.4mm_EP1.65x2.65mm_ThermalVias +QFN, 24 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_20_05-08-1742.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +38 +25 +Package_DFN_QFN +QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm +QFN, 24 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=278), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +29 +25 +Package_DFN_QFN +QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm_ThermalVias +QFN, 24 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=278), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +39 +25 +Package_DFN_QFN +QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.6mm +QFN, 24 Pin (https://store.invensense.com/datasheets/invensense/MPU-6050_DataSheet_V3%204.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +29 +25 +Package_DFN_QFN +QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.6mm_ThermalVias +QFN, 24 Pin (https://store.invensense.com/datasheets/invensense/MPU-6050_DataSheet_V3%204.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +39 +25 +Package_DFN_QFN +QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm +QFN, 24 Pin (http://www.alfarzpp.lv/eng/sc/AS3330.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +29 +25 +Package_DFN_QFN +QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm_ThermalVias +QFN, 24 Pin (http://www.alfarzpp.lv/eng/sc/AS3330.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +39 +25 +Package_DFN_QFN +QFN-24-1EP_4x4mm_P0.5mm_EP2.8x2.8mm +QFN, 24 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/hmc431.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +29 +25 +Package_DFN_QFN +QFN-24-1EP_4x4mm_P0.5mm_EP2.8x2.8mm_ThermalVias +QFN, 24 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/hmc431.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +39 +25 +Package_DFN_QFN +QFN-24-1EP_4x4mm_P0.5mm_EP2.15x2.15mm +QFN, 24 Pin (https://www.st.com/resource/en/datasheet/led1642gw.pdf#page=34), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +29 +25 +Package_DFN_QFN +QFN-24-1EP_4x4mm_P0.5mm_EP2.15x2.15mm_ThermalVias +QFN, 24 Pin (https://www.st.com/resource/en/datasheet/led1642gw.pdf#page=34), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +39 +25 +Package_DFN_QFN +QFN-24-1EP_4x4mm_P0.5mm_EP2.65x2.65mm +QFN, 24 Pin (http://www.cypress.com/file/46236/download), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +29 +25 +Package_DFN_QFN +QFN-24-1EP_4x4mm_P0.5mm_EP2.65x2.65mm_ThermalVias +QFN, 24 Pin (http://www.cypress.com/file/46236/download), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +39 +25 +Package_DFN_QFN +QFN-24-1EP_4x4mm_P0.5mm_EP2.75x2.75mm +QFN, 24 Pin (https://www.infineon.com/dgdl/Infineon-EZ-PD_BCR_Datasheet_USB_Type-C_Port_Controller_for_Power_Sinks-DataSheet-v03_00-EN.pdf?fileId=8ac78c8c7d0d8da4017d0ee7ce9d70ad), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +29 +25 +Package_DFN_QFN +QFN-24-1EP_4x4mm_P0.5mm_EP2.75x2.75mm_ThermalVias +QFN, 24 Pin (https://www.infineon.com/dgdl/Infineon-EZ-PD_BCR_Datasheet_USB_Type-C_Port_Controller_for_Power_Sinks-DataSheet-v03_00-EN.pdf?fileId=8ac78c8c7d0d8da4017d0ee7ce9d70ad), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +39 +25 +Package_DFN_QFN +QFN-24-1EP_4x5mm_P0.5mm_EP2.65x3.65mm +QFN, 24 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_24_05-08-1696.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +31 +25 +Package_DFN_QFN +QFN-24-1EP_4x5mm_P0.5mm_EP2.65x3.65mm_ThermalVias +QFN, 24 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_24_05-08-1696.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +44 +25 +Package_DFN_QFN +QFN-24-1EP_5x5mm_P0.65mm_EP3.2x3.2mm +QFN, 24 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/(UH24)%20QFN%2005-08-1747%20Rev%20A.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +29 +25 +Package_DFN_QFN +QFN-24-1EP_5x5mm_P0.65mm_EP3.2x3.2mm_ThermalVias +QFN, 24 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/(UH24)%20QFN%2005-08-1747%20Rev%20A.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +51 +25 +Package_DFN_QFN +QFN-24-1EP_5x5mm_P0.65mm_EP3.4x3.4mm +QFN, 24 Pin (http://www.thatcorp.com/datashts/THAT_5173_Datasheet.pdf#page=17), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +29 +25 +Package_DFN_QFN +QFN-24-1EP_5x5mm_P0.65mm_EP3.4x3.4mm_ThermalVias +QFN, 24 Pin (http://www.thatcorp.com/datashts/THAT_5173_Datasheet.pdf#page=17), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +39 +25 +Package_DFN_QFN +QFN-24-1EP_5x5mm_P0.65mm_EP3.6x3.6mm +QFN, 24 Pin (https://www.nxp.com/docs/en/package-information/98ASA00734D.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +34 +25 +Package_DFN_QFN +QFN-24-1EP_5x5mm_P0.65mm_EP3.6x3.6mm_ThermalVias +QFN, 24 Pin (https://www.nxp.com/docs/en/package-information/98ASA00734D.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +67 +25 +Package_DFN_QFN +QFN-24-1EP_5x5mm_P0.65mm_EP3.25x3.25mm +QFN, 24 Pin (https://semtech.my.salesforce.com/sfc/p/#E0000000JelG/a/44000000MDkO/lWPNMeJClEs8Zvyu7AlDlKSyZqhYdVpQzFLVfUp.EXs), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +29 +25 +Package_DFN_QFN +QFN-24-1EP_5x5mm_P0.65mm_EP3.25x3.25mm_ThermalVias +QFN, 24 Pin (https://semtech.my.salesforce.com/sfc/p/#E0000000JelG/a/44000000MDkO/lWPNMeJClEs8Zvyu7AlDlKSyZqhYdVpQzFLVfUp.EXs), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +51 +25 +Package_DFN_QFN +QFN-28-1EP_3x6mm_P0.5mm_EP1.7x4.75mm +QFN, 28 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/05081926_0_UDE28.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +37 +29 +Package_DFN_QFN +QFN-28-1EP_3x6mm_P0.5mm_EP1.7x4.75mm_ThermalVias +QFN, 28 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/05081926_0_UDE28.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +53 +29 +Package_DFN_QFN +QFN-28-1EP_4x4mm_P0.4mm_EP2.3x2.3mm +QFN, 28 Pin (http://www.issi.com/WW/pdf/31FL3731.pdf#page=21), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +33 +29 +Package_DFN_QFN +QFN-28-1EP_4x4mm_P0.4mm_EP2.3x2.3mm_ThermalVias +QFN, 28 Pin (http://www.issi.com/WW/pdf/31FL3731.pdf#page=21), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +43 +29 +Package_DFN_QFN +QFN-28-1EP_4x4mm_P0.4mm_EP2.4x2.4mm +QFN, 28 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=280), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +33 +29 +Package_DFN_QFN +QFN-28-1EP_4x4mm_P0.4mm_EP2.4x2.4mm_ThermalVias +QFN, 28 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=280), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +43 +29 +Package_DFN_QFN +QFN-28-1EP_4x4mm_P0.4mm_EP2.6x2.6mm +QFN, 28 Pin (package code T2844-1; https://pdfserv.maximintegrated.com/package_dwgs/21-0139.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +33 +29 +Package_DFN_QFN +QFN-28-1EP_4x4mm_P0.4mm_EP2.6x2.6mm_ThermalVias +QFN, 28 Pin (package code T2844-1; https://pdfserv.maximintegrated.com/package_dwgs/21-0139.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +43 +29 +Package_DFN_QFN +QFN-28-1EP_4x4mm_P0.45mm_EP2.4x2.4mm +QFN, 28 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/8008S.pdf#page=16), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +33 +29 +Package_DFN_QFN +QFN-28-1EP_4x4mm_P0.45mm_EP2.4x2.4mm_ThermalVias +QFN, 28 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/8008S.pdf#page=16), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +43 +29 +Package_DFN_QFN +QFN-28-1EP_4x5mm_P0.5mm_EP2.65x3.65mm +QFN, 28 Pin (http://www.analog.com/media/en/technical-documentation/data-sheets/3555fe.pdf#page=32), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +35 +29 +Package_DFN_QFN +QFN-28-1EP_4x5mm_P0.5mm_EP2.65x3.65mm_ThermalVias +QFN, 28 Pin (http://www.analog.com/media/en/technical-documentation/data-sheets/3555fe.pdf#page=32), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +48 +29 +Package_DFN_QFN +QFN-28-1EP_5x5mm_P0.5mm_EP3.1x3.1mm +QFN, 28 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/TMC2202_TMC2208_TMC2224_datasheet_rev1.14.pdf#page=77), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +38 +29 +Package_DFN_QFN +QFN-28-1EP_5x5mm_P0.5mm_EP3.1x3.1mm_ThermalVias +QFN, 28 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/TMC2202_TMC2208_TMC2224_datasheet_rev1.14.pdf#page=77), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +71 +29 +Package_DFN_QFN +QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm +QFN, 28 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=283), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +38 +29 +Package_DFN_QFN +QFN-28-1EP_5x5mm_P0.5mm_EP3.35x3.35mm_ThermalVias +QFN, 28 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=283), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +55 +29 +Package_DFN_QFN +QFN-28-1EP_5x5mm_P0.5mm_EP3.75x3.75mm +QFN, 28 Pin (https://www.cmlmicro.com/wp-content/uploads/2017/10/CMX901_ds.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +38 +29 +Package_DFN_QFN +QFN-28-1EP_5x5mm_P0.5mm_EP3.75x3.75mm_ThermalVias +QFN, 28 Pin (https://www.cmlmicro.com/wp-content/uploads/2017/10/CMX901_ds.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +91 +29 +Package_DFN_QFN +QFN-28-1EP_5x6mm_P0.5mm_EP3.65x4.65mm +QFN, 28 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/05081932_0_UHE28.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +41 +29 +Package_DFN_QFN +QFN-28-1EP_5x6mm_P0.5mm_EP3.65x4.65mm_ThermalVias +QFN, 28 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/05081932_0_UHE28.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +62 +29 +Package_DFN_QFN +QFN-28-1EP_6x6mm_P0.65mm_EP4.8x4.8mm +QFN, 28 Pin (https://www.semtech.com/uploads/documents/sx1272.pdf#page=125), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +38 +29 +Package_DFN_QFN +QFN-28-1EP_6x6mm_P0.65mm_EP4.8x4.8mm_ThermalVias +QFN, 28 Pin (https://www.semtech.com/uploads/documents/sx1272.pdf#page=125), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +71 +29 +Package_DFN_QFN +QFN-28-1EP_6x6mm_P0.65mm_EP4.25x4.25mm +QFN, 28 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=289), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +38 +29 +Package_DFN_QFN +QFN-28-1EP_6x6mm_P0.65mm_EP4.25x4.25mm_ThermalVias +QFN, 28 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=289), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +71 +29 +Package_DFN_QFN +QFN-28_4x4mm_P0.5mm +QFN, 28 Pin (http://www.st.com/resource/en/datasheet/stm32f031k6.pdf#page=90), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +28 +28 +Package_DFN_QFN +QFN-32-1EP_4x4mm_P0.4mm_EP2.9x2.9mm +QFN, 32 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/atmel-8153-8-and-16-bit-avr-microcontroller-xmega-e-atxmega8e5-atxmega16e5-atxmega32e5_datasheet.pdf#page=70), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +37 +33 +Package_DFN_QFN +QFN-32-1EP_4x4mm_P0.4mm_EP2.9x2.9mm_ThermalVias +QFN, 32 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/atmel-8153-8-and-16-bit-avr-microcontroller-xmega-e-atxmega8e5-atxmega16e5-atxmega32e5_datasheet.pdf#page=70), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +47 +33 +Package_DFN_QFN +QFN-32-1EP_4x4mm_P0.4mm_EP2.65x2.65mm +QFN, 32 Pin (https://www.renesas.com/eu/en/package-image/pdf/outdrawing/l32.4x4a.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +37 +33 +Package_DFN_QFN +QFN-32-1EP_4x4mm_P0.4mm_EP2.65x2.65mm_ThermalVias +QFN, 32 Pin (https://www.renesas.com/eu/en/package-image/pdf/outdrawing/l32.4x4a.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +59 +33 +Package_DFN_QFN +QFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm +QFN, 32 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/8008S.pdf#page=20), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +42 +33 +Package_DFN_QFN +QFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm_ThermalVias +QFN, 32 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/8008S.pdf#page=20), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +59 +33 +Package_DFN_QFN +QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm +QFN, 32 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/00002164B.pdf#page=68), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +42 +33 +Package_DFN_QFN +QFN-32-1EP_5x5mm_P0.5mm_EP3.3x3.3mm_ThermalVias +QFN, 32 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/00002164B.pdf#page=68), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +59 +33 +Package_DFN_QFN +QFN-32-1EP_5x5mm_P0.5mm_EP3.6x3.6mm +QFN, 32 Pin (http://infocenter.nordicsemi.com/pdf/nRF52810_PS_v1.1.pdf#page=468), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +42 +33 +Package_DFN_QFN +QFN-32-1EP_5x5mm_P0.5mm_EP3.6x3.6mm_ThermalVias +QFN, 32 Pin (http://infocenter.nordicsemi.com/pdf/nRF52810_PS_v1.1.pdf#page=468), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +59 +33 +Package_DFN_QFN +QFN-32-1EP_5x5mm_P0.5mm_EP3.7x3.7mm +QFN, 32 Pin (https://www.espressif.com/sites/default/files/documentation/0a-esp8285_datasheet_en.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +37 +33 +Package_DFN_QFN +QFN-32-1EP_5x5mm_P0.5mm_EP3.7x3.7mm_ThermalVias +QFN, 32 Pin (https://www.espressif.com/sites/default/files/documentation/0a-esp8285_datasheet_en.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +59 +33 +Package_DFN_QFN +QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm +QFN, 32 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_32_05-08-1693.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +42 +33 +Package_DFN_QFN +QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm_ThermalVias +QFN, 32 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_32_05-08-1693.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +59 +33 +Package_DFN_QFN +QFN-32-1EP_5x5mm_P0.5mm_EP3.65x3.65mm +QFN, 32 Pin (https://www.exar.com/ds/mxl7704.pdf#page=35), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +42 +33 +Package_DFN_QFN +QFN-32-1EP_5x5mm_P0.5mm_EP3.65x3.65mm_ThermalVias +QFN, 32 Pin (https://www.exar.com/ds/mxl7704.pdf#page=35), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +59 +33 +Package_DFN_QFN +QFN-32-1EP_7x7mm_P0.65mm_EP4.7x4.7mm +QFN, 32 Pin (https://www.nxp.com/docs/en/data-sheet/LPC111X.pdf#page=108), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +49 +33 +Package_DFN_QFN +QFN-32-1EP_7x7mm_P0.65mm_EP4.7x4.7mm_ThermalVias +QFN, 32 Pin (https://www.nxp.com/docs/en/data-sheet/LPC111X.pdf#page=108), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +75 +33 +Package_DFN_QFN +QFN-32-1EP_7x7mm_P0.65mm_EP4.65x4.65mm +QFN, 32 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-8209-8-bit%20AVR%20ATmega16M1-32M1-64M1_Datasheet.pdf#page=426), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +49 +33 +Package_DFN_QFN +QFN-32-1EP_7x7mm_P0.65mm_EP4.65x4.65mm_ThermalVias +QFN, 32 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-8209-8-bit%20AVR%20ATmega16M1-32M1-64M1_Datasheet.pdf#page=426), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +75 +33 +Package_DFN_QFN +QFN-32-1EP_7x7mm_P0.65mm_EP5.4x5.4mm +QFN, 32 Pin (http://www.thatcorp.com/datashts/THAT_5171_Datasheet.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +49 +33 +Package_DFN_QFN +QFN-32-1EP_7x7mm_P0.65mm_EP5.4x5.4mm_ThermalVias +QFN, 32 Pin (http://www.thatcorp.com/datashts/THAT_5171_Datasheet.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +75 +33 +Package_DFN_QFN +QFN-36-1EP_5x6mm_P0.5mm_EP3.6x4.1mm +QFN, 36 Pin (https://www.trinamic.com/fileadmin/assets/Products/ICs_Documents/TMC2100_datasheet_Rev1.08.pdf#page=43), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +46 +37 +Package_DFN_QFN +QFN-36-1EP_5x6mm_P0.5mm_EP3.6x4.1mm_ThermalVias +QFN, 36 Pin (https://www.trinamic.com/fileadmin/assets/Products/ICs_Documents/TMC2100_datasheet_Rev1.08.pdf#page=43), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +56 +37 +Package_DFN_QFN +QFN-36-1EP_5x6mm_P0.5mm_EP3.6x4.6mm +QFN, 36 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/(UHE36)%20QFN%2005-08-1876%20Rev%20%C3%98.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +49 +37 +Package_DFN_QFN +QFN-36-1EP_5x6mm_P0.5mm_EP3.6x4.6mm_ThermalVias +QFN, 36 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/(UHE36)%20QFN%2005-08-1876%20Rev%20%C3%98.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +56 +37 +Package_DFN_QFN +QFN-36-1EP_6x6mm_P0.5mm_EP3.7x3.7mm +QFN, 36 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/36L_QFN_6x6_with_3_7x3_7_EP_Punch_Dimpled_4E_C04-0241A.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +46 +37 +Package_DFN_QFN +QFN-36-1EP_6x6mm_P0.5mm_EP3.7x3.7mm_ThermalVias +QFN, 36 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/36L_QFN_6x6_with_3_7x3_7_EP_Punch_Dimpled_4E_C04-0241A.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +63 +37 +Package_DFN_QFN +QFN-36-1EP_6x6mm_P0.5mm_EP4.1x4.1mm +QFN, 36 Pin (www.st.com/resource/en/datasheet/stm32f101t6.pdf#page=72), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +46 +37 +Package_DFN_QFN +QFN-36-1EP_6x6mm_P0.5mm_EP4.1x4.1mm_ThermalVias +QFN, 36 Pin (www.st.com/resource/en/datasheet/stm32f101t6.pdf#page=72), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +63 +37 +Package_DFN_QFN +QFN-38-1EP_4x6mm_P0.4mm_EP2.65x4.65mm +QFN, 38 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_38_05-08-1750.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +47 +39 +Package_DFN_QFN +QFN-38-1EP_4x6mm_P0.4mm_EP2.65x4.65mm_ThermalVias +QFN, 38 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_38_05-08-1750.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +56 +39 +Package_DFN_QFN +QFN-38-1EP_5x7mm_P0.5mm_EP3.15x5.15mm +QFN, 38 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_38_05-08-1701.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +54 +39 +Package_DFN_QFN +QFN-38-1EP_5x7mm_P0.5mm_EP3.15x5.15mm_ThermalVias +QFN, 38 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_38_05-08-1701.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +63 +39 +Package_DFN_QFN +QFN-40-1EP_5x5mm_P0.4mm_EP3.6x3.6mm +QFN, 40 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=297), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +50 +41 +Package_DFN_QFN +QFN-40-1EP_5x5mm_P0.4mm_EP3.6x3.6mm_ThermalVias +QFN, 40 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=297), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +67 +41 +Package_DFN_QFN +QFN-40-1EP_5x5mm_P0.4mm_EP3.8x3.8mm +QFN, 40 Pin (http://www.issi.com/WW/pdf/31FL3736.pdf#page=28), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +50 +41 +Package_DFN_QFN +QFN-40-1EP_5x5mm_P0.4mm_EP3.8x3.8mm_ThermalVias +QFN, 40 Pin (http://www.issi.com/WW/pdf/31FL3736.pdf#page=28), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +67 +41 +Package_DFN_QFN +QFN-40-1EP_6x6mm_P0.5mm_EP4.6x4.6mm +QFN, 40 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=295), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +57 +41 +Package_DFN_QFN +QFN-40-1EP_6x6mm_P0.5mm_EP4.6x4.6mm_ThermalVias +QFN, 40 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=295), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +83 +41 +Package_DFN_QFN +QFN-42-1EP_5x6mm_P0.4mm_EP3.7x4.7mm +QFN, 42 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/05081875_0_UHE42.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +55 +43 +Package_DFN_QFN +QFN-42-1EP_5x6mm_P0.4mm_EP3.7x4.7mm_ThermalVias +QFN, 42 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/05081875_0_UHE42.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +76 +43 +Package_DFN_QFN +QFN-44-1EP_7x7mm_P0.5mm_EP5.2x5.2mm +QFN, 44 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/2512S.pdf#page=17), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +61 +45 +Package_DFN_QFN +QFN-44-1EP_7x7mm_P0.5mm_EP5.2x5.2mm_ThermalVias +QFN, 44 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/2512S.pdf#page=17), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +87 +45 +Package_DFN_QFN +QFN-44-1EP_7x7mm_P0.5mm_EP5.15x5.15mm +QFN, 44 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_44_05-08-1763.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +61 +45 +Package_DFN_QFN +QFN-44-1EP_7x7mm_P0.5mm_EP5.15x5.15mm_ThermalVias +QFN, 44 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_44_05-08-1763.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +87 +45 +Package_DFN_QFN +QFN-44-1EP_8x8mm_P0.65mm_EP6.45x6.45mm +QFN, 44 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/39935c.pdf#page=152), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +70 +45 +Package_DFN_QFN +QFN-44-1EP_8x8mm_P0.65mm_EP6.45x6.45mm_ThermalVias +QFN, 44 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/39935c.pdf#page=152), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +107 +45 +Package_DFN_QFN +QFN-44-1EP_9x9mm_P0.65mm_EP7.5x7.5mm +44-Lead Plastic Quad Flat, No Lead Package - 9x9 mm Body [QFN]; see section 10.3 of https://www.parallax.com/sites/default/files/downloads/P8X32A-Propeller-Datasheet-v1.4.0_0.pdf +QFN 0.65 +0 +49 +45 +Package_DFN_QFN +QFN-44-1EP_9x9mm_P0.65mm_EP7.5x7.5mm_ThermalVias +44-Lead Plastic Quad Flat, No Lead Package - 9x9 mm Body [QFN] with thermal vias; see section 10.3 of https://www.parallax.com/sites/default/files/downloads/P8X32A-Propeller-Datasheet-v1.4.0_0.pdf +QFN 0.65 +0 +55 +45 +Package_DFN_QFN +QFN-48-1EP_5x5mm_P0.35mm_EP3.7x3.7mm +QFN, 48 Pin (https://www.espressif.com/sites/default/files/documentation/esp32_datasheet_en.pdf#page=38), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +58 +49 +Package_DFN_QFN +QFN-48-1EP_5x5mm_P0.35mm_EP3.7x3.7mm_ThermalVias +QFN, 48 Pin (https://www.espressif.com/sites/default/files/documentation/esp32_datasheet_en.pdf#page=38), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +75 +49 +Package_DFN_QFN +QFN-48-1EP_6x6mm_P0.4mm_EP4.2x4.2mm +QFN, 48 Pin (https://static.dev.sifive.com/SiFive-FE310-G000-datasheet-v1p5.pdf#page=20), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +58 +49 +Package_DFN_QFN +QFN-48-1EP_6x6mm_P0.4mm_EP4.2x4.2mm_ThermalVias +QFN, 48 Pin (https://static.dev.sifive.com/SiFive-FE310-G000-datasheet-v1p5.pdf#page=20), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +91 +49 +Package_DFN_QFN +QFN-48-1EP_6x6mm_P0.4mm_EP4.3x4.3mm +QFN, 48 Pin (https://www.espressif.com/sites/default/files/documentation/esp32_datasheet_en.pdf#page=38), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +58 +49 +Package_DFN_QFN +QFN-48-1EP_6x6mm_P0.4mm_EP4.3x4.3mm_ThermalVias +QFN, 48 Pin (https://www.espressif.com/sites/default/files/documentation/esp32_datasheet_en.pdf#page=38), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +75 +49 +Package_DFN_QFN +QFN-48-1EP_6x6mm_P0.4mm_EP4.6x4.6mm +QFN, 48 Pin (http://infocenter.nordicsemi.com/pdf/nRF51822_PS_v3.3.pdf#page=67), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +58 +49 +Package_DFN_QFN +QFN-48-1EP_6x6mm_P0.4mm_EP4.6x4.6mm_ThermalVias +QFN, 48 Pin (http://infocenter.nordicsemi.com/pdf/nRF51822_PS_v3.3.pdf#page=67), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +91 +49 +Package_DFN_QFN +QFN-48-1EP_6x6mm_P0.4mm_EP4.66x4.66mm +QFN, 48 Pin (https://www.onsemi.com/pub/Collateral/485BA.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +58 +49 +Package_DFN_QFN +QFN-48-1EP_6x6mm_P0.4mm_EP4.66x4.66mm_ThermalVias +QFN, 48 Pin (https://www.onsemi.com/pub/Collateral/485BA.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +91 +49 +Package_DFN_QFN +QFN-48-1EP_7x7mm_P0.5mm_EP3.5x3.5mm +QFN, 48 Pin (http://ww1.microchip.com/downloads/en/devicedoc/00002117f.pdf#page=69), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +58 +49 +Package_DFN_QFN +QFN-48-1EP_7x7mm_P0.5mm_EP3.5x3.5mm_ThermalVias +QFN, 48 Pin (http://ww1.microchip.com/downloads/en/devicedoc/00002117f.pdf#page=69), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +75 +49 +Package_DFN_QFN +QFN-48-1EP_7x7mm_P0.5mm_EP5.1x5.1mm +QFN, 48 Pin (http://ww1.microchip.com/downloads/en/devicedoc/00002117f.pdf#page=70), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +65 +49 +Package_DFN_QFN +QFN-48-1EP_7x7mm_P0.5mm_EP5.1x5.1mm_ThermalVias +QFN, 48 Pin (http://ww1.microchip.com/downloads/en/devicedoc/00002117f.pdf#page=70), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +91 +49 +Package_DFN_QFN +QFN-48-1EP_7x7mm_P0.5mm_EP5.3x5.3mm +QFN, 48 Pin (https://www.trinamic.com/fileadmin/assets/Products/ICs_Documents/TMC2041_datasheet.pdf#page=62), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +65 +49 +Package_DFN_QFN +QFN-48-1EP_7x7mm_P0.5mm_EP5.3x5.3mm_ThermalVias +QFN, 48 Pin (https://www.trinamic.com/fileadmin/assets/Products/ICs_Documents/TMC2041_datasheet.pdf#page=62), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +91 +49 +Package_DFN_QFN +QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm +QFN, 48 Pin (http://www.st.com/resource/en/datasheet/stm32f042k6.pdf#page=94), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +65 +49 +Package_DFN_QFN +QFN-48-1EP_7x7mm_P0.5mm_EP5.6x5.6mm_ThermalVias +QFN, 48 Pin (http://www.st.com/resource/en/datasheet/stm32f042k6.pdf#page=94), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +91 +49 +Package_DFN_QFN +QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm +QFN, 48 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_48_05-08-1704.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +65 +49 +Package_DFN_QFN +QFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm_ThermalVias +QFN, 48 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_48_05-08-1704.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +91 +49 +Package_DFN_QFN +QFN-48-1EP_7x7mm_P0.5mm_EP5.45x5.45mm +QFN, 48 Pin (http://www.thatcorp.com/datashts/THAT_626x_Datasheet.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +65 +49 +Package_DFN_QFN +QFN-48-1EP_7x7mm_P0.5mm_EP5.45x5.45mm_ThermalVias +QFN, 48 Pin (http://www.thatcorp.com/datashts/THAT_626x_Datasheet.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +91 +49 +Package_DFN_QFN +QFN-48-1EP_8x8mm_P0.5mm_EP6.2x6.2mm +QFN, 48 Pin (https://www.ftdichip.com/Support/Documents/DataSheets/ICs/DS_FT232H.pdf#page=49), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +74 +49 +Package_DFN_QFN +QFN-48-1EP_8x8mm_P0.5mm_EP6.2x6.2mm_ThermalVias +QFN, 48 Pin (https://www.ftdichip.com/Support/Documents/DataSheets/ICs/DS_FT232H.pdf#page=49), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +111 +49 +Package_DFN_QFN +QFN-52-1EP_7x8mm_P0.5mm_EP5.41x6.45mm +QFN, 52 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_52_05-08-1729.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +73 +53 +Package_DFN_QFN +QFN-52-1EP_7x8mm_P0.5mm_EP5.41x6.45mm_ThermalVias +QFN, 52 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_52_05-08-1729.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +104 +53 +Package_DFN_QFN +QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm +QFN, 56 Pin (https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#page=634), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +61 +57 +Package_DFN_QFN +QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm_ThermalVias +QFN, 56 Pin (https://datasheets.raspberrypi.com/rp2040/rp2040-datasheet.pdf#page=634), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +66 +57 +Package_DFN_QFN +QFN-56-1EP_7x7mm_P0.4mm_EP4x4mm +QFN, 56 Pin (https://www.espressif.com/sites/default/files/documentation/esp32-s2_datasheet_en.pdf#page=41), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +66 +57 +Package_DFN_QFN +QFN-56-1EP_7x7mm_P0.4mm_EP4x4mm_ThermalVias +QFN, 56 Pin (https://www.espressif.com/sites/default/files/documentation/esp32-s2_datasheet_en.pdf#page=41), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +71 +57 +Package_DFN_QFN +QFN-56-1EP_7x7mm_P0.4mm_EP5.6x5.6mm +QFN, 56 Pin (http://www.cypress.com/file/416486/download#page=40), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +73 +57 +Package_DFN_QFN +QFN-56-1EP_7x7mm_P0.4mm_EP5.6x5.6mm_ThermalVias +QFN, 56 Pin (http://www.cypress.com/file/416486/download#page=40), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +99 +57 +Package_DFN_QFN +QFN-56-1EP_8x8mm_P0.5mm_EP4.3x4.3mm +QFN, 56 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/00002142A.pdf#page=40), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +73 +57 +Package_DFN_QFN +QFN-56-1EP_8x8mm_P0.5mm_EP4.3x4.3mm_ThermalVias +QFN, 56 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/00002142A.pdf#page=40), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +99 +57 +Package_DFN_QFN +QFN-56-1EP_8x8mm_P0.5mm_EP4.5x5.2mm +QFN, 56 Pin (http://www.ti.com/lit/an/scea032/scea032.pdf#page=4), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +73 +57 +Package_DFN_QFN +QFN-56-1EP_8x8mm_P0.5mm_EP4.5x5.2mm_ThermalVias +QFN, 56 Pin (http://www.ti.com/lit/an/scea032/scea032.pdf#page=4), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +99 +57 +Package_DFN_QFN +QFN-56-1EP_8x8mm_P0.5mm_EP4.5x5.2mm_ThermalVias_TopTented +QFN, 56 Pin top tented version (manually modified). For information see: http://www.cypress.com/file/138911/download +QFN DFN_QFN +0 +115 +57 +Package_DFN_QFN +QFN-56-1EP_8x8mm_P0.5mm_EP5.6x5.6mm +QFN, 56 Pin (http://www.ti.com/lit/ds/symlink/tlc5957.pdf#page=23), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +73 +57 +Package_DFN_QFN +QFN-56-1EP_8x8mm_P0.5mm_EP5.6x5.6mm_ThermalVias +QFN, 56 Pin (http://www.ti.com/lit/ds/symlink/tlc5957.pdf#page=23), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +99 +57 +Package_DFN_QFN +QFN-56-1EP_8x8mm_P0.5mm_EP5.9x5.9mm +QFN, 56 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/00001734B.pdf#page=50), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +73 +57 +Package_DFN_QFN +QFN-56-1EP_8x8mm_P0.5mm_EP5.9x5.9mm_ThermalVias +QFN, 56 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/00001734B.pdf#page=50), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +99 +57 +Package_DFN_QFN +QFN-56-1EP_8x8mm_P0.5mm_EP6.1x6.1mm +QFN, 56 Pin (http://intantech.com/files/Intan_RHD2000_series_datasheet.pdf#page=38), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +73 +57 +Package_DFN_QFN +QFN-56-1EP_8x8mm_P0.5mm_EP6.1x6.1mm_ThermalVias +QFN, 56 Pin (http://intantech.com/files/Intan_RHD2000_series_datasheet.pdf#page=38), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +99 +57 +Package_DFN_QFN +QFN-64-1EP_8x8mm_P0.4mm_EP6.5x6.5mm +QFN, 64 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/64L_VQFN_8x8_with%206_5x6_5%20EP_JXX_C04-0437A.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +90 +65 +Package_DFN_QFN +QFN-64-1EP_8x8mm_P0.4mm_EP6.5x6.5mm_ThermalVias +QFN, 64 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/64L_VQFN_8x8_with%206_5x6_5%20EP_JXX_C04-0437A.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +127 +65 +Package_DFN_QFN +QFN-64-1EP_9x9mm_P0.5mm_EP3.4x3.4mm +QFN, 64 Pin (www.intel.com/content/www/us/en/ethernet-controllers/i210-ethernet-controller-datasheet.html), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +74 +65 +Package_DFN_QFN +QFN-64-1EP_9x9mm_P0.5mm_EP3.4x3.4mm_ThermalVias +QFN, 64 Pin (www.intel.com/content/www/us/en/ethernet-controllers/i210-ethernet-controller-datasheet.html), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +79 +65 +Package_DFN_QFN +QFN-64-1EP_9x9mm_P0.5mm_EP3.8x3.8mm +QFN, 64 Pin (https://datasheet.lcsc.com/szlcsc/Realtek-Semicon-RTL8211EG-VB-CG_C69264.pdf#page=77), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +74 +65 +Package_DFN_QFN +QFN-64-1EP_9x9mm_P0.5mm_EP3.8x3.8mm_ThermalVias +QFN, 64 Pin (https://datasheet.lcsc.com/szlcsc/Realtek-Semicon-RTL8211EG-VB-CG_C69264.pdf#page=77), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +79 +65 +Package_DFN_QFN +QFN-64-1EP_9x9mm_P0.5mm_EP4.1x4.1mm +QFN, 64 Pin (https://www.silabs.com/documents/public/data-sheets/cp2108-datasheet.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +74 +65 +Package_DFN_QFN +QFN-64-1EP_9x9mm_P0.5mm_EP4.1x4.1mm_ThermalVias +QFN, 64 Pin (https://www.silabs.com/documents/public/data-sheets/cp2108-datasheet.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +79 +65 +Package_DFN_QFN +QFN-64-1EP_9x9mm_P0.5mm_EP4.7x4.7mm +QFN, 64 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/60001477A.pdf (page 1083)), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +74 +65 +Package_DFN_QFN +QFN-64-1EP_9x9mm_P0.5mm_EP4.7x4.7mm_ThermalVias +QFN, 64 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/60001477A.pdf (page 1083)), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +91 +65 +Package_DFN_QFN +QFN-64-1EP_9x9mm_P0.5mm_EP4.35x4.35mm +QFN, 64 Pin (https://www.ftdichip.com/Support/Documents/DataSheets/ICs/DS_FT2232H.pdf#page=57), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +74 +65 +Package_DFN_QFN +QFN-64-1EP_9x9mm_P0.5mm_EP4.35x4.35mm_ThermalVias +QFN, 64 Pin (https://www.ftdichip.com/Support/Documents/DataSheets/ICs/DS_FT2232H.pdf#page=57), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +91 +65 +Package_DFN_QFN +QFN-64-1EP_9x9mm_P0.5mm_EP5.2x5.2mm +QFN, 64 Pin (https://www.silabs.com/documents/public/data-sheets/Si5345-44-42-D-DataSheet.pdf#page=51), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +81 +65 +Package_DFN_QFN +QFN-64-1EP_9x9mm_P0.5mm_EP5.2x5.2mm_ThermalVias +QFN, 64 Pin (https://www.silabs.com/documents/public/data-sheets/Si5345-44-42-D-DataSheet.pdf#page=51), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +107 +65 +Package_DFN_QFN +QFN-64-1EP_9x9mm_P0.5mm_EP5.4x5.4mm +QFN, 64 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/70593d.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +81 +65 +Package_DFN_QFN +QFN-64-1EP_9x9mm_P0.5mm_EP5.4x5.4mm_ThermalVias +QFN, 64 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/70593d.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +107 +65 +Package_DFN_QFN +QFN-64-1EP_9x9mm_P0.5mm_EP5.45x5.45mm +QFN, 64 Pin (https://www.infineon.com/dgdl/Infineon-MA12040-DS-v01_00-EN.pdf?fileId=5546d46264a8de7e0164b7467a3d617c#page=81), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +81 +65 +Package_DFN_QFN +QFN-64-1EP_9x9mm_P0.5mm_EP5.45x5.45mm_ThermalVias +QFN, 64 Pin (https://www.infineon.com/dgdl/Infineon-MA12040-DS-v01_00-EN.pdf?fileId=5546d46264a8de7e0164b7467a3d617c#page=81), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +107 +65 +Package_DFN_QFN +QFN-64-1EP_9x9mm_P0.5mm_EP6x6mm +QFN, 64 Pin (http://www.ti.com/lit/ds/symlink/tusb8041.pdf#page=42), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +81 +65 +Package_DFN_QFN +QFN-64-1EP_9x9mm_P0.5mm_EP6x6mm_ThermalVias +QFN, 64 Pin (http://www.ti.com/lit/ds/symlink/tusb8041.pdf#page=42), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +107 +65 +Package_DFN_QFN +QFN-64-1EP_9x9mm_P0.5mm_EP7.3x7.3mm +QFN, 64 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/00002304A.pdf (page 43)), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +90 +65 +Package_DFN_QFN +QFN-64-1EP_9x9mm_P0.5mm_EP7.3x7.3mm_ThermalVias +QFN, 64 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/00002304A.pdf (page 43)), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +127 +65 +Package_DFN_QFN +QFN-64-1EP_9x9mm_P0.5mm_EP7.5x7.5mm +QFN, 64 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/doc7593.pdf (page 432)), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +101 +65 +Package_DFN_QFN +QFN-64-1EP_9x9mm_P0.5mm_EP7.5x7.5mm_ThermalVias +QFN, 64 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/doc7593.pdf (page 432)), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +151 +65 +Package_DFN_QFN +QFN-64-1EP_9x9mm_P0.5mm_EP7.15x7.15mm +QFN, 64 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/229321fa.pdf#page=27), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +90 +65 +Package_DFN_QFN +QFN-64-1EP_9x9mm_P0.5mm_EP7.15x7.15mm_ThermalVias +QFN, 64 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/229321fa.pdf#page=27), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +127 +65 +Package_DFN_QFN +QFN-64-1EP_9x9mm_P0.5mm_EP7.25x7.25mm +64-Lead Plastic Quad Flat No-Lead Package, 9x9mm Body (see Atmel Appnote 8826) +QFN 0.5 +0 +90 +65 +Package_DFN_QFN +QFN-64-1EP_9x9mm_P0.5mm_EP7.35x7.35mm +64-Lead Plastic Quad Flat, No Lead Package (MR) - 9x9x0.9 mm Body [QFN]; (see Microchip Packaging Specification 00000049BS.pdf) +QFN 0.5 +0 +90 +65 +Package_DFN_QFN +QFN-64-1EP_9x9mm_P0.5mm_EP7.65x7.65mm +QFN, 64 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-2549-8-bit-AVR-Microcontroller-ATmega640-1280-1281-2560-2561_datasheet.pdf (page 415)), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +101 +65 +Package_DFN_QFN +QFN-64-1EP_9x9mm_P0.5mm_EP7.65x7.65mm_ThermalVias +QFN, 64 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-2549-8-bit-AVR-Microcontroller-ATmega640-1280-1281-2560-2561_datasheet.pdf (page 415)), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +151 +65 +Package_DFN_QFN +QFN-68-1EP_8x8mm_P0.4mm_EP5.2x5.2mm +QFN, 68 Pin (https://cdn.microsemi.com/documents/1bf6886f-5919-4508-a50b-b1dbf3fdf0f4/download/#page=98), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +85 +69 +Package_DFN_QFN +QFN-68-1EP_8x8mm_P0.4mm_EP5.2x5.2mm_ThermalVias +QFN, 68 Pin (https://cdn.microsemi.com/documents/1bf6886f-5919-4508-a50b-b1dbf3fdf0f4/download/#page=98), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +111 +69 +Package_DFN_QFN +QFN-68-1EP_8x8mm_P0.4mm_EP6.4x6.4mm +QFN, 68 Pin (https://www.st.com/resource/en/datasheet/stm32h725ze.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +85 +69 +Package_DFN_QFN +QFN-68-1EP_8x8mm_P0.4mm_EP6.4x6.4mm_ThermalVias +QFN, 68 Pin (https://www.st.com/resource/en/datasheet/stm32h725ze.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +111 +69 +Package_DFN_QFN +QFN-72-1EP_10x10mm_P0.5mm_EP6x6mm +QFN, 72 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/00001682C.pdf#page=70), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +82 +73 +Package_DFN_QFN +QFN-72-1EP_10x10mm_P0.5mm_EP6x6mm_ThermalVias +QFN, 72 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/00001682C.pdf#page=70), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +135 +73 +Package_DFN_QFN +QFN-76-1EP_9x9mm_P0.4mm_EP3.8x3.8mm +QFN, 76 Pin (https://www.marvell.com/documents/bqcwxsoiqfjkcjdjhkvc/#page=19), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +86 +77 +Package_DFN_QFN +QFN-76-1EP_9x9mm_P0.4mm_EP3.8x3.8mm_ThermalVias +QFN, 76 Pin (https://www.marvell.com/documents/bqcwxsoiqfjkcjdjhkvc/#page=19), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +103 +77 +Package_DFN_QFN +QFN-76-1EP_9x9mm_P0.4mm_EP5.81x6.31mm +QFN, 76 Pin (https://ftdichip.com/wp-content/uploads/2020/07/DS_FT600Q-FT601Q-IC-Datasheet.pdf#page=27), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +78 +77 +Package_DFN_QFN +QFN-76-1EP_9x9mm_P0.4mm_EP5.81x6.31mm_ThermalVias +QFN, 76 Pin (https://ftdichip.com/wp-content/uploads/2020/07/DS_FT600Q-FT601Q-IC-Datasheet.pdf#page=27), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +103 +77 +Package_DFN_QFN +Qorvo_DFN-8-1EP_2x2mm_P0.5mm +DFN 8 2x2mm, 0.5mm http://www.qorvo.com/products/d/da000896 +DFN 0.5 Qorvo 2x2mm +0 +9 +9 +Package_DFN_QFN +ROHM_DFN0604-3 +DFN package size 0604 3 pins +DFN package size 0604 3 pins +0 +3 +3 +Package_DFN_QFN +ST_UFQFPN-20_3x3mm_P0.5mm +UFQFPN 20-lead, 3 x 3 mm, 0.5 mm pitch, ultra thin fine pitch quad flat package (http://www.st.com/resource/en/datasheet/stm8s003f3.pdf) +UFQFPN 0.5 +0 +20 +20 +Package_DFN_QFN +ST_UQFN-6L_1.5x1.7mm_P0.5mm +ST UQFN 6 pin 0.5mm Pitch http://www.st.com/resource/en/datasheet/ecmf02-2amx6.pdf +UQFN DFN 0.5 ST +0 +6 +6 +Package_DFN_QFN +SiliconLabs_QFN-20-1EP_3x3mm_P0.5mm_EP1.8x1.8mm +20-Lead Plastic Quad Flat, No Lead Package - 3x3 mm Body [QFN] with corner pads; see figure 8.2 of https://www.silabs.com/documents/public/data-sheets/efm8bb1-datasheet.pdf +QFN 0.5 +0 +25 +21 +Package_DFN_QFN +SiliconLabs_QFN-20-1EP_3x3mm_P0.5mm_EP1.8x1.8mm_ThermalVias +20-Lead Plastic Quad Flat, No Lead Package - 3x3 mm Body [QFN] with corner pads and thermal vias; see figure 8.2 of https://www.silabs.com/documents/public/data-sheets/efm8bb1-datasheet.pdf +QFN 0.5 +0 +31 +21 +Package_DFN_QFN +TDFN-6-1EP_2.5x2.5mm_P0.65mm_EP1.3x2mm +TDFN, 6 Pin (http://www.nve.com/Downloads/ab3.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +TDFN NoLead +0 +11 +7 +Package_DFN_QFN +TDFN-6-1EP_2.5x2.5mm_P0.65mm_EP1.3x2mm_ThermalVias +TDFN, 6 Pin (http://www.nve.com/Downloads/ab3.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +TDFN NoLead +0 +18 +7 +Package_DFN_QFN +TDFN-8-1EP_2x2mm_P0.5mm_EP0.8x1.2mm +TDFN, 8 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0168.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py +TDFN NoLead +0 +13 +9 +Package_DFN_QFN +TDFN-8-1EP_3x2mm_P0.5mm_EP1.3x1.4mm +TDFN, 8 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/MCP6V66-Family-Data-Sheet-DS20006266A.pdf#page=35), generated with kicad-footprint-generator ipc_noLead_generator.py +TDFN NoLead +0 +13 +9 +Package_DFN_QFN +TDFN-8-1EP_3x2mm_P0.5mm_EP1.4x1.4mm +TDFN, 8 Pin (http://ww1.microchip.com/downloads/en/devicedoc/20005514a.pdf#page=35), generated with kicad-footprint-generator ipc_noLead_generator.py +TDFN NoLead +0 +13 +9 +Package_DFN_QFN +TDFN-8-1EP_3x2mm_P0.5mm_EP1.80x1.65mm +8-lead plastic dual flat, 2x3x0.75mm size, 0.5mm pitch (http://ww1.microchip.com/downloads/en/DeviceDoc/8L_TDFN_2x3_MN_C04-0129E-MN.pdf) +TDFN DFN 0.5mm +0 +12 +9 +Package_DFN_QFN +TDFN-8-1EP_3x2mm_P0.5mm_EP1.80x1.65mm_ThermalVias +8-lead plastic dual flat, 2x3x0.75mm size, 0.5mm pitch (http://ww1.microchip.com/downloads/en/DeviceDoc/8L_TDFN_2x3_MN_C04-0129E-MN.pdf) +TDFN DFN 0.5mm +0 +17 +9 +Package_DFN_QFN +TDFN-8_1.4x1.6mm_P0.4mm +TDFN, 8 Pin (https://www.silabs.com/documents/public/data-sheets/si7210-datasheet.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +TDFN NoLead +0 +8 +8 +Package_DFN_QFN +TDFN-10-1EP_2x3mm_P0.5mm_EP0.9x2mm +TDFN, 10 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0429.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py +TDFN NoLead +0 +13 +11 +Package_DFN_QFN +TDFN-10-1EP_2x3mm_P0.5mm_EP0.9x2mm_ThermalVias +TDFN, 10 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0429.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py +TDFN NoLead +0 +16 +11 +Package_DFN_QFN +TDFN-12-1EP_3x3mm_P0.4mm_EP1.7x2.45mm +TDFN, 12 Pin (https://www.renesas.com/us/en/document/psc/package-drawing-tdfn-12pin-l123x3c), generated with kicad-footprint-generator ipc_noLead_generator.py +TDFN NoLead +0 +25 +13 +Package_DFN_QFN +TDFN-12-1EP_3x3mm_P0.4mm_EP1.7x2.45mm_ThermalVias +TDFN, 12 Pin (https://www.renesas.com/us/en/document/psc/package-drawing-tdfn-12pin-l123x3c), generated with kicad-footprint-generator ipc_noLead_generator.py +TDFN NoLead +0 +32 +13 +Package_DFN_QFN +TDFN-12_2x3mm_P0.5mm +TDFN, 12 Pads, No exposed, http://www.st.com/resource/en/datasheet/stm6600.pdf +DFN +0 +12 +12 +Package_DFN_QFN +TDFN-14-1EP_3x3mm_P0.4mm_EP1.78x2.35mm +TDFN, 14 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0137.PDF (T1433-2C)), generated with kicad-footprint-generator ipc_noLead_generator.py +TDFN NoLead +0 +19 +15 +Package_DFN_QFN +TDFN-14-1EP_3x3mm_P0.4mm_EP1.78x2.35mm_ThermalVias +TDFN, 14 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0137.PDF (T1433-2C)), generated with kicad-footprint-generator ipc_noLead_generator.py +TDFN NoLead +0 +26 +15 +Package_DFN_QFN +TQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm +TQFN, 16 Pin (https://www.diodes.com/assets/Datasheets/PI6C5946002.pdf#page=12), generated with kicad-footprint-generator ipc_noLead_generator.py +TQFN NoLead +0 +21 +17 +Package_DFN_QFN +TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mm +TQFN, 16 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0136.PDF (T1633-5), https://pdfserv.maximintegrated.com/land_patterns/90-0032.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py +TQFN NoLead +0 +21 +17 +Package_DFN_QFN +TQFN-16-1EP_3x3mm_P0.5mm_EP1.23x1.23mm_ThermalVias +TQFN, 16 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0136.PDF (T1633-5), https://pdfserv.maximintegrated.com/land_patterns/90-0032.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py +TQFN NoLead +0 +26 +17 +Package_DFN_QFN +TQFN-16-1EP_5x5mm_P0.8mm_EP2.29x2.29mm +TQFN, 16 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0140.PDF (T1655-4)), generated with kicad-footprint-generator ipc_noLead_generator.py +TQFN NoLead +0 +21 +17 +Package_DFN_QFN +TQFN-16-1EP_5x5mm_P0.8mm_EP2.29x2.29mm_ThermalVias +TQFN, 16 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0140.PDF (T1655-4)), generated with kicad-footprint-generator ipc_noLead_generator.py +TQFN NoLead +0 +26 +17 +Package_DFN_QFN +TQFN-16-1EP_5x5mm_P0.8mm_EP3.1x3.1mm +TQFN, 16 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0140.PDF (T1655-2)), generated with kicad-footprint-generator ipc_noLead_generator.py +TQFN NoLead +0 +21 +17 +Package_DFN_QFN +TQFN-16-1EP_5x5mm_P0.8mm_EP3.1x3.1mm_ThermalVias +TQFN, 16 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0140.PDF (T1655-2)), generated with kicad-footprint-generator ipc_noLead_generator.py +TQFN NoLead +0 +31 +17 +Package_DFN_QFN +TQFN-20-1EP_4x4mm_P0.5mm_EP2.1x2.1mm +TQFN, 20 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0139.PDF (T2044-2)), generated with kicad-footprint-generator ipc_noLead_generator.py +TQFN NoLead +0 +25 +21 +Package_DFN_QFN +TQFN-20-1EP_4x4mm_P0.5mm_EP2.1x2.1mm_ThermalVias +TQFN, 20 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0139.PDF (T2044-2)), generated with kicad-footprint-generator ipc_noLead_generator.py +TQFN NoLead +0 +30 +21 +Package_DFN_QFN +TQFN-20-1EP_4x4mm_P0.5mm_EP2.7x2.7mm +TQFN, 20 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0139.PDF (T2044-5C)), generated with kicad-footprint-generator ipc_noLead_generator.py +TQFN NoLead +0 +25 +21 +Package_DFN_QFN +TQFN-20-1EP_4x4mm_P0.5mm_EP2.7x2.7mm_ThermalVias +TQFN, 20 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0139.PDF (T2044-5C)), generated with kicad-footprint-generator ipc_noLead_generator.py +TQFN NoLead +0 +35 +21 +Package_DFN_QFN +TQFN-20-1EP_4x4mm_P0.5mm_EP2.9x2.9mm +TQFN, 20 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-100172.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py +TQFN NoLead +0 +25 +21 +Package_DFN_QFN +TQFN-20-1EP_4x4mm_P0.5mm_EP2.9x2.9mm_ThermalVias +TQFN, 20 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-100172.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py +TQFN NoLead +0 +35 +21 +Package_DFN_QFN +TQFN-20-1EP_5x5mm_P0.65mm_EP3.1x3.1mm +TQFN, 20 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0140.PDF (T2055-3)), generated with kicad-footprint-generator ipc_noLead_generator.py +TQFN NoLead +0 +25 +21 +Package_DFN_QFN +TQFN-20-1EP_5x5mm_P0.65mm_EP3.1x3.1mm_ThermalVias +TQFN, 20 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0140.PDF (T2055-3)), generated with kicad-footprint-generator ipc_noLead_generator.py +TQFN NoLead +0 +35 +21 +Package_DFN_QFN +TQFN-20-1EP_5x5mm_P0.65mm_EP3.25x3.25mm +TQFN, 20 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0140.PDF (T2055-5)), generated with kicad-footprint-generator ipc_noLead_generator.py +TQFN NoLead +0 +25 +21 +Package_DFN_QFN +TQFN-20-1EP_5x5mm_P0.65mm_EP3.25x3.25mm_ThermalVias +TQFN, 20 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0140.PDF (T2055-5)), generated with kicad-footprint-generator ipc_noLead_generator.py +TQFN NoLead +0 +35 +21 +Package_DFN_QFN +TQFN-24-1EP_4x4mm_P0.5mm_EP2.1x2.1mm +TQFN, 24 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0139.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py +TQFN NoLead +0 +29 +25 +Package_DFN_QFN +TQFN-24-1EP_4x4mm_P0.5mm_EP2.1x2.1mm_ThermalVias +TQFN, 24 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0139.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py +TQFN NoLead +0 +39 +25 +Package_DFN_QFN +TQFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm +TQFN, 24 Pin (http://pdfserv.maxim-ic.com/package_dwgs/21-0139.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py +TQFN NoLead +0 +29 +25 +Package_DFN_QFN +TQFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm_ThermalVias +TQFN, 24 Pin (http://pdfserv.maxim-ic.com/package_dwgs/21-0139.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py +TQFN NoLead +0 +39 +25 +Package_DFN_QFN +TQFN-24-1EP_4x4mm_P0.5mm_EP2.8x2.8mm_PullBack +TQFN, 24 Pin (https://ams.com/documents/20143/36005/AS1115_DS000206_1-00.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +TQFN NoLead +0 +29 +25 +Package_DFN_QFN +TQFN-24-1EP_4x4mm_P0.5mm_EP2.8x2.8mm_PullBack_ThermalVias +TQFN, 24 Pin (https://ams.com/documents/20143/36005/AS1115_DS000206_1-00.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +TQFN NoLead +0 +39 +25 +Package_DFN_QFN +TQFN-28-1EP_5x5mm_P0.5mm_EP2.7x2.7mm +TQFN, 28 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0140.PDF (T2855-4)), generated with kicad-footprint-generator ipc_noLead_generator.py +TQFN NoLead +0 +33 +29 +Package_DFN_QFN +TQFN-28-1EP_5x5mm_P0.5mm_EP2.7x2.7mm_ThermalVias +TQFN, 28 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0140.PDF (T2855-4)), generated with kicad-footprint-generator ipc_noLead_generator.py +TQFN NoLead +0 +38 +29 +Package_DFN_QFN +TQFN-28-1EP_5x5mm_P0.5mm_EP3.25x3.25mm +TQFN, 28 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0140.PDF (T2855-3)), generated with kicad-footprint-generator ipc_noLead_generator.py +TQFN NoLead +0 +33 +29 +Package_DFN_QFN +TQFN-28-1EP_5x5mm_P0.5mm_EP3.25x3.25mm_ThermalVias +TQFN, 28 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0140.PDF (T2855-3)), generated with kicad-footprint-generator ipc_noLead_generator.py +TQFN NoLead +0 +43 +29 +Package_DFN_QFN +TQFN-32-1EP_5x5mm_P0.5mm_EP2.1x2.1mm +TQFN, 32 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0140.PDF (T3255-6)), generated with kicad-footprint-generator ipc_noLead_generator.py +TQFN NoLead +0 +37 +33 +Package_DFN_QFN +TQFN-32-1EP_5x5mm_P0.5mm_EP2.1x2.1mm_ThermalVias +TQFN, 32 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0140.PDF (T3255-6)), generated with kicad-footprint-generator ipc_noLead_generator.py +TQFN NoLead +0 +42 +33 +Package_DFN_QFN +TQFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm +TQFN, 32 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0140.PDF (T3255-3)), generated with kicad-footprint-generator ipc_noLead_generator.py +TQFN NoLead +0 +37 +33 +Package_DFN_QFN +TQFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm_ThermalVias +TQFN, 32 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0140.PDF (T3255-3)), generated with kicad-footprint-generator ipc_noLead_generator.py +TQFN NoLead +0 +47 +33 +Package_DFN_QFN +TQFN-32-1EP_5x5mm_P0.5mm_EP3.4x3.4mm +TQFN, 32 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0140.PDF (T3255-9)), generated with kicad-footprint-generator ipc_noLead_generator.py +TQFN NoLead +0 +37 +33 +Package_DFN_QFN +TQFN-32-1EP_5x5mm_P0.5mm_EP3.4x3.4mm_ThermalVias +TQFN, 32 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0140.PDF (T3255-9)), generated with kicad-footprint-generator ipc_noLead_generator.py +TQFN NoLead +0 +47 +33 +Package_DFN_QFN +TQFN-40-1EP_5x5mm_P0.4mm_EP3.5x3.5mm +TQFN, 40 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0140.PDF (T4055-1)), generated with kicad-footprint-generator ipc_noLead_generator.py +TQFN NoLead +0 +45 +41 +Package_DFN_QFN +TQFN-40-1EP_5x5mm_P0.4mm_EP3.5x3.5mm_ThermalVias +TQFN, 40 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0140.PDF (T4055-1)), generated with kicad-footprint-generator ipc_noLead_generator.py +TQFN NoLead +0 +55 +41 +Package_DFN_QFN +TQFN-48-1EP_7x7mm_P0.5mm_EP5.1x5.1mm +TQFN, 48 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0144.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py +TQFN NoLead +0 +58 +49 +Package_DFN_QFN +TQFN-48-1EP_7x7mm_P0.5mm_EP5.1x5.1mm_ThermalVias +TQFN, 48 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0144.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py +TQFN NoLead +0 +75 +49 +Package_DFN_QFN +Texas_B3QFN-14-1EP_5x5.5mm_P0.65mm +Texas instruments QFN Package, datasheet: https://www.ti.com/lit/ds/symlink/tpsm53602.pdf +Texas instruments QFN +0 +15 +15 +Package_DFN_QFN +Texas_B3QFN-14-1EP_5x5.5mm_P0.65mm_ThermalVia +Texas instruments QFN Package, datasheet: https://www.ti.com/lit/ds/symlink/tpsm53602.pdf +Texas instruments QFN +0 +34 +15 +Package_DFN_QFN +Texas_DRB0008A +DFN-8, 3x3x1mm, http://www.ti.com/lit/ds/symlink/ucc24610.pdf +DRB0008A +0 +23 +9 +Package_DFN_QFN +Texas_MOF0009A +Texas Instruments, QFM MOF0009A, 6x8x2mm (http://www.ti.com/lit/ml/mpsi063a/mpsi063a.pdf) +ti qfm mof0009a +0 +24 +9 +Package_DFN_QFN +Texas_QFN-41_10x16mm +QFN, 41 Pin (http://www.ti.com/lit/ml/mpqf506/mpqf506.pdf) +QFN DFN_QFN +0 +65 +41 +Package_DFN_QFN +Texas_R-PUQFN-N10 +http://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=MPQF186&fileType=pdf +Texas_R-PUQFN-N10 +0 +10 +10 +Package_DFN_QFN +Texas_R-PUQFN-N12 +Texas_R-PUQFN-N12 http://www.ti.com/lit/ds/symlink/txb0104.pdf +Texas_R-PUQFN-N12 +0 +13 +12 +Package_DFN_QFN +Texas_R-PWQFN-N28_EP2.1x3.1mm +QFN, 28 Pin (http://www.ti.com/lit/ds/symlink/tps51363.pdf#page=29), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +33 +29 +Package_DFN_QFN +Texas_R-PWQFN-N28_EP2.1x3.1mm_ThermalVias +QFN, 28 Pin (http://www.ti.com/lit/ds/symlink/tps51363.pdf#page=29), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +43 +29 +Package_DFN_QFN +Texas_RGE0024C_EP2.1x2.1mm +Texas QFN, 24 Pin (http://www.ti.com/lit/ds/symlink/pca9548a.pdf#page=37), generated with kicad-footprint-generator ipc_noLead_generator.py +Texas QFN NoLead +0 +29 +25 +Package_DFN_QFN +Texas_RGE0024C_EP2.1x2.1mm_ThermalVias +Texas QFN, 24 Pin (http://www.ti.com/lit/ds/symlink/pca9548a.pdf#page=37), generated with kicad-footprint-generator ipc_noLead_generator.py +Texas QFN NoLead +0 +39 +25 +Package_DFN_QFN +Texas_RGE0024H_EP2.7x2.7mm +Texas QFN, 24 Pin (http://www.ti.com/lit/ds/symlink/tlc5971.pdf#page=39), generated with kicad-footprint-generator ipc_noLead_generator.py +Texas QFN NoLead +0 +29 +25 +Package_DFN_QFN +Texas_RGE0024H_EP2.7x2.7mm_ThermalVias +Texas QFN, 24 Pin (http://www.ti.com/lit/ds/symlink/tlc5971.pdf#page=39), generated with kicad-footprint-generator ipc_noLead_generator.py +Texas QFN NoLead +0 +39 +25 +Package_DFN_QFN +Texas_RGV_S-PVQFN-N16_EP2.1x2.1mm +QFN, 16 Pin (http://www.ti.com/lit/ds/symlink/ina3221.pdf#page=44), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +21 +17 +Package_DFN_QFN +Texas_RGV_S-PVQFN-N16_EP2.1x2.1mm_ThermalVias +QFN, 16 Pin (http://www.ti.com/lit/ds/symlink/ina3221.pdf#page=44), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +31 +17 +Package_DFN_QFN +Texas_RGY_R-PVQFN-N16_EP2.05x2.55mm +QFN, 16 Pin (https://www.ti.com/lit/ds/symlink/ts5v330.pdf#page=28) +QFN NoLead +0 +21 +17 +Package_DFN_QFN +Texas_RGY_R-PVQFN-N16_EP2.05x2.55mm_ThermalVias +QFN, 16 Pin (https://www.ti.com/lit/ds/symlink/ts5v330.pdf#page=28) +QFN NoLead +0 +27 +18 +Package_DFN_QFN +Texas_RGY_R-PVQFN-N20_EP2.05x3.05mm +QFN, 20 Pin, RGY0020A (https://www.ti.com/lit/ds/symlink/txb0108.pdf#page=33) +QFN NoLead +0 +25 +21 +Package_DFN_QFN +Texas_RGY_R-PVQFN-N20_EP2.05x3.05mm_ThermalVias +QFN, 20 Pin, RGY0020A (https://www.ti.com/lit/ds/symlink/txb0108.pdf#page=33) +QFN NoLead +0 +29 +21 +Package_DFN_QFN +Texas_RGY_R-PVQFN-N24_EP2.05x3.1mm +QFN, 24 Pin (http://www.ti.com/lit/ds/symlink/bq24133.pdf#page=40) +QFN NoLead +0 +29 +25 +Package_DFN_QFN +Texas_RGY_R-PVQFN-N24_EP2.05x3.1mm_ThermalVias +QFN, 24 Pin (http://www.ti.com/lit/ds/symlink/bq24133.pdf#page=40) +QFN NoLead +0 +36 +25 +Package_DFN_QFN +Texas_RJE0020A_VQFN-20-1EP_3x3mm_P0.45mm_EP0.675x0.76mm +Texas RJE0020A VQFN, 20 Pin (https://www.ti.com/lit/ds/symlink/tps51396a.pdf#page=31), generated with kicad-footprint-generator ipc_noLead_generator.py +Texas VQFN NoLead +0 +22 +21 +Package_DFN_QFN +Texas_RJE0020A_VQFN-20-1EP_3x3mm_P0.45mm_EP0.675x0.76mm_ThermalVias +Texas RJE0020A VQFN, 20 Pin (https://www.ti.com/lit/ds/symlink/tps51396a.pdf#page=31), generated with kicad-footprint-generator ipc_noLead_generator.py +Texas VQFN NoLead +0 +24 +21 +Package_DFN_QFN +Texas_RNN0018A +Texas Instruments, VQFN-HR RNN0018A (http://www.ti.com/lit/ds/symlink/tps568215.pdf) +ti vqfn-hr rnn0018a +0 +26 +18 +Package_DFN_QFN +Texas_RUM0016A_EP2.6x2.6mm +QFN, 16 Pin (http://www.ti.com/lit/ds/symlink/lmh0074.pdf#page=13), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +21 +17 +Package_DFN_QFN +Texas_RUM0016A_EP2.6x2.6mm_ThermalVias +QFN, 16 Pin (http://www.ti.com/lit/ds/symlink/lmh0074.pdf#page=13), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +31 +17 +Package_DFN_QFN +Texas_RWH0032A +Texas Instruments, RWH0032A, 8x8x0.9mm (http://www.ti.com/lit/ds/snosd10c/snosd10c.pdf) +ti rwh0032a +0 +71 +33 +Package_DFN_QFN +Texas_RWH0032A_ThermalVias +Texas Instruments, RWH0032A, 8x8x0.9mm (http://www.ti.com/lit/ds/snosd10c/snosd10c.pdf) +ti rwh0032a +0 +94 +33 +Package_DFN_QFN +Texas_S-PDSO-N10_EP1.2x2mm +DFN, 10 Pin (http://www.ti.com/lit/ds/symlink/tps7a91.pdf#page=30), generated with kicad-footprint-generator ipc_noLead_generator.py +DFN NoLead +0 +15 +11 +Package_DFN_QFN +Texas_S-PDSO-N10_EP1.2x2mm_ThermalVias +DFN, 10 Pin (http://www.ti.com/lit/ds/symlink/tps7a91.pdf#page=30), generated with kicad-footprint-generator ipc_noLead_generator.py +DFN NoLead +0 +22 +11 +Package_DFN_QFN +Texas_S-PVQFN-N14 +Texas_S-PVQFN-N14 http://www.ti.com/lit/ds/symlink/txb0104.pdf +Texas_S-PVQFN-N14_4.3x4.3_Pitch0.5mm_ThermalPad +0 +19 +15 +Package_DFN_QFN +Texas_S-PVQFN-N14_ThermalVias +Texas_S-PVQFN-N14_ThermalVias http://www.ti.com/lit/ds/symlink/txb0104.pdf +Texas_S-PVQFN-N14_ThermalVias +0 +24 +15 +Package_DFN_QFN +Texas_S-PVQFN-N16_EP2.7x2.7mm +QFN, 16 Pin (http://www.ti.com/lit/ds/symlink/msp430g2001.pdf#page=43), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +26 +17 +Package_DFN_QFN +Texas_S-PVQFN-N16_EP2.7x2.7mm_ThermalVias +QFN, 16 Pin (http://www.ti.com/lit/ds/symlink/msp430g2001.pdf#page=43), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +31 +17 +Package_DFN_QFN +Texas_S-PVQFN-N20_EP2.4x2.4mm +QFN, 20 Pin (http://www.ti.com/lit/ds/symlink/cc1101.pdf#page=101), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +25 +21 +Package_DFN_QFN +Texas_S-PVQFN-N20_EP2.4x2.4mm_ThermalVias +QFN, 20 Pin (http://www.ti.com/lit/ds/symlink/cc1101.pdf#page=101), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +35 +21 +Package_DFN_QFN +Texas_S-PVQFN-N20_EP2.7x2.7mm +QFN, 20 Pin (http://www.ti.com/lit/ds/symlink/drv8662.pdf#page=23), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +25 +21 +Package_DFN_QFN +Texas_S-PVQFN-N20_EP2.7x2.7mm_ThermalVias +QFN, 20 Pin (http://www.ti.com/lit/ds/symlink/drv8662.pdf#page=23), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +35 +21 +Package_DFN_QFN +Texas_S-PVQFN-N20_EP3.15x3.15mm +QFN, 20 Pin (www.ti.com/lit/ds/symlink/tps7a7200.pdf#page=36), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +25 +21 +Package_DFN_QFN +Texas_S-PVQFN-N20_EP3.15x3.15mm_ThermalVias +QFN, 20 Pin (www.ti.com/lit/ds/symlink/tps7a7200.pdf#page=36), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +47 +21 +Package_DFN_QFN +Texas_S-PVQFN-N24_EP2.1x2.1mm +QFN, 24 Pin (http://www.ti.com/lit/ds/symlink/msp430fr5720.pdf#page=108), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +29 +25 +Package_DFN_QFN +Texas_S-PVQFN-N24_EP2.1x2.1mm_ThermalVias +QFN, 24 Pin (http://www.ti.com/lit/ds/symlink/msp430fr5720.pdf#page=108), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +39 +25 +Package_DFN_QFN +Texas_S-PVQFN-N32_EP3.45x3.45mm +QFN, 32 Pin (http://www.ti.com/lit/ds/symlink/msp430f1122.pdf#page=54), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +42 +33 +Package_DFN_QFN +Texas_S-PVQFN-N32_EP3.45x3.45mm_ThermalVias +QFN, 32 Pin (http://www.ti.com/lit/ds/symlink/msp430f1122.pdf#page=54), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +59 +33 +Package_DFN_QFN +Texas_S-PVQFN-N36_EP4.4x4.4mm +QFN, 36 Pin (http://www.ti.com/lit/ds/slvsba5d/slvsba5d.pdf#page=35), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +46 +37 +Package_DFN_QFN +Texas_S-PVQFN-N36_EP4.4x4.4mm_ThermalVias +QFN, 36 Pin (http://www.ti.com/lit/ds/slvsba5d/slvsba5d.pdf#page=35), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +79 +37 +Package_DFN_QFN +Texas_S-PVQFN-N40_EP2.9x2.9mm +QFN, 40 Pin (http://www.ti.com/lit/ds/symlink/msp430fr5731.pdf#page=111 JEDEC MO-220 variation VJJD-2), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +45 +41 +Package_DFN_QFN +Texas_S-PVQFN-N40_EP2.9x2.9mm_ThermalVias +QFN, 40 Pin (http://www.ti.com/lit/ds/symlink/msp430fr5731.pdf#page=111 JEDEC MO-220 variation VJJD-2), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +55 +41 +Package_DFN_QFN +Texas_S-PVQFN-N40_EP3.52x2.62mm +QFN, 40 Pin (http://www.ti.com/lit/ds/symlink/drv8308.pdf#page=56 JEDEC MO-220 variation VJJD-2), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +47 +41 +Package_DFN_QFN +Texas_S-PVQFN-N40_EP3.52x2.62mm_ThermalVias +QFN, 40 Pin (http://www.ti.com/lit/ds/symlink/drv8308.pdf#page=56 JEDEC MO-220 variation VJJD-2), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +60 +41 +Package_DFN_QFN +Texas_S-PVQFN-N40_EP4.6x4.6mm +QFN, 40 Pin (http://www.ti.com/lit/ds/symlink/dac7750.pdf#page=54), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +50 +41 +Package_DFN_QFN +Texas_S-PVQFN-N40_EP4.6x4.6mm_ThermalVias +QFN, 40 Pin (http://www.ti.com/lit/ds/symlink/dac7750.pdf#page=54), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +83 +41 +Package_DFN_QFN +Texas_S-PVQFN-N40_EP4.15x4.15mm +QFN, 40 Pin (http://www.ti.com/lit/ds/symlink/msp430g2755.pdf#page=70 JEDEC MO-220 variation VJJD-2), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +50 +41 +Package_DFN_QFN +Texas_S-PVQFN-N40_EP4.15x4.15mm_ThermalVias +QFN, 40 Pin (http://www.ti.com/lit/ds/symlink/msp430g2755.pdf#page=70 JEDEC MO-220 variation VJJD-2), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +83 +41 +Package_DFN_QFN +Texas_S-PVQFN-N48_EP5.15x5.15mm +QFN, 48 Pin (http://www.ti.com/lit/ds/symlink/msp430f5232.pdf#page=111), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +65 +49 +Package_DFN_QFN +Texas_S-PVQFN-N48_EP5.15x5.15mm_ThermalVias +QFN, 48 Pin (http://www.ti.com/lit/ds/symlink/msp430f5232.pdf#page=111), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +111 +49 +Package_DFN_QFN +Texas_S-PVQFN-N64_EP4.25x4.25mm +QFN, 64 Pin (http://www.ti.com/lit/ds/symlink/msp430f5217.pdf#page=120), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +69 +65 +Package_DFN_QFN +Texas_S-PVQFN-N64_EP4.25x4.25mm_ThermalVias +QFN, 64 Pin (http://www.ti.com/lit/ds/symlink/msp430f5217.pdf#page=120), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +127 +65 +Package_DFN_QFN +Texas_S-PWQFN-N16_EP1.2x0.8mm +Texas RTE WQFN, 16 Pin (https://www.ti.com/lit/ds/symlink/tps43060.pdf#page=40), generated with kicad-footprint-generator ipc_noLead_generator.py +Texas WQFN NoLead +0 +21 +17 +Package_DFN_QFN +Texas_S-PWQFN-N16_EP1.2x0.8mm_ThermalVias +Texas RTE WQFN, 16 Pin (https://www.ti.com/lit/ds/symlink/tps43060.pdf#page=40), generated with kicad-footprint-generator ipc_noLead_generator.py +Texas WQFN NoLead +0 +23 +17 +Package_DFN_QFN +Texas_S-PWQFN-N16_EP2.1x2.1mm +QFN, 16 Pin (http://www.ti.com/lit/ds/symlink/drv8801.pdf#page=31 MO-220 variation VGGC), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +21 +17 +Package_DFN_QFN +Texas_S-PWQFN-N16_EP2.1x2.1mm_ThermalVias +QFN, 16 Pin (http://www.ti.com/lit/ds/symlink/drv8801.pdf#page=31 MO-220 variation VGGC), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +31 +17 +Package_DFN_QFN +Texas_S-PWQFN-N20 +20-Pin Plastic Quad Flatpack No-Lead Package, Body 3.0x3.0x0.8mm, Texas Instruments (http://www.ti.com/lit/ds/symlink/tps22993.pdf) +QFN 0.4 +0 +24 +20 +Package_DFN_QFN +Texas_S-PWQFN-N24_EP2.7x2.7mm +QFN, 24 Pin (http://www.ti.com/lit/ds/symlink/bq25601.pdf#page=54), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +29 +25 +Package_DFN_QFN +Texas_S-PWQFN-N24_EP2.7x2.7mm_ThermalVias +QFN, 24 Pin (http://www.ti.com/lit/ds/symlink/bq25601.pdf#page=54), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +39 +25 +Package_DFN_QFN +Texas_S-PWQFN-N32_EP2.8x2.8mm +QFN, 32 Pin (https://www.ti.com/lit/ds/symlink/bq25703a.pdf#page=90), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +37 +33 +Package_DFN_QFN +Texas_S-PWQFN-N32_EP2.8x2.8mm_ThermalVias +QFN, 32 Pin (https://www.ti.com/lit/ds/symlink/bq25703a.pdf#page=90), generated with kicad-footprint-generator ipc_noLead_generator.py +QFN NoLead +0 +47 +33 +Package_DFN_QFN +Texas_S-PWQFN-N100_EP5.5x5.5mm +http://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=szza059&fileType=pdf,http://www.ti.com/lit/ds/sllse76m/sllse76m.pdf +MultiRow QFN +0 +114 +105 +Package_DFN_QFN +Texas_S-PWQFN-N100_EP5.5x5.5mm_ThermalVias +http://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=szza059&fileType=pdf,http://www.ti.com/lit/ds/sllse76m/sllse76m.pdf +MultiRow QFN +0 +131 +105 +Package_DFN_QFN +Texas_S-PX2QFN-14 +Texas QFN, 14 Pin (http://www.ti.com/lit/ds/symlink/tlv9004.pdf#page=64), generated with kicad-footprint-generator ipc_noLead_generator.py +Texas QFN NoLead +0 +14 +14 +Package_DFN_QFN +Texas_UQFN-10_1.5x2mm_P0.5mm +Texas RSE0010A UQFN, 10 Pin (https://www.ti.com/lit/ml/mpqf186d/mpqf186d.pdf) +Texas RSE0010 UQFN NoLead +0 +10 +10 +Package_DFN_QFN +Texas_VQFN-HR-12_2x2.5mm_P0.5mm +Texas VQFN-HR, 12 Pin, http://www.ti.com/lit/ml/mpqf508/mpqf508.pdf +RUX0012A Texas VQFN-HR NoLead +0 +12 +12 +Package_DFN_QFN +Texas_VQFN-HR-12_2x2.5mm_P0.5mm_ThermalVias +Texas VQFN-HR, 12 Pin, http://www.ti.com/lit/ml/mpqf508/mpqf508.pdf +RUX0012A Texas VQFN-HR NoLead +0 +16 +12 +Package_DFN_QFN +Texas_VQFN-HR-20_3x2.5mm_P0.5mm_RQQ0011A +Texas VQFN-HR, 11 Pin, https://www.ti.com/lit/ml/mpqf579/mpqf579.pdf +RQQ0011A +0 +15 +11 +Package_DFN_QFN +Texas_VQFN-RHL-20 +http://www.ti.com/lit/ds/symlink/bq51050b.pdf +RHL0020A +0 +33 +21 +Package_DFN_QFN +Texas_VQFN-RHL-20_ThermalVias +http://www.ti.com/lit/ds/symlink/bq51050b.pdf +RHL0020A +0 +41 +21 +Package_DFN_QFN +Texas_VSON-HR-8_1.5x2mm_P0.5mm +Texas VSON-HR, 8 Pin (http://www.ti.com/lit/ds/symlink/tps62823.pdf#page=29), generated with kicad-footprint-generator ipc_noLead_generator.py +Texas VSON-HR NoLead +0 +8 +8 +Package_DFN_QFN +Texas_WQFN-10_2x2mm_P0.5mm +Texas WQFN, 10 Pin (https://www.ti.com/lit/ds/symlink/tmp461.pdf#page=35 (RUN0010A)), generated with kicad-footprint-generator ipc_noLead_generator.py +Texas WQFN NoLead +0 +10 +10 +Package_DFN_QFN +Texas_WQFN-MR-100_3x3-DapStencil +http://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=szza059&fileType=pdf,http://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=mpqf258&fileType=pdf,http://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=LPPD235&fileType=pdf +MultiRow QFN +0 +113 +105 +Package_DFN_QFN +Texas_WQFN-MR-100_ThermalVias_3x3-DapStencil +http://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=szza059&fileType=pdf,http://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=mpqf258&fileType=pdf,http://www.ti.com/general/docs/lit/getliterature.tsp?baseLiteratureNumber=LPPD235&fileType=pdf +MultiRow QFN +0 +126 +105 +Package_DFN_QFN +Texas_X2QFN-12_1.6x1.6mm_P0.4mm +Texas X2QFN, 12 Pin (http://www.ti.com/lit/ml/mpqf391c/mpqf391c.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +Texas X2QFN NoLead +0 +12 +12 +Package_DFN_QFN +UDFN-4-1EP_1x1mm_P0.65mm_EP0.48x0.48mm +UDFN-4_1x1mm_P0.65mm, http://ww1.microchip.com/downloads/en/DeviceDoc/MIC550x-300mA-Single-Output-LDO-in-Small-Packages-DS20006006A.pdf +UDFN-4_1x1mm_P0.65mm +0 +5 +5 +Package_DFN_QFN +UDFN-9_1.0x3.8mm_P0.5mm +9-pin UDFN package, 1.0x3.8mm, (Ref: https://katalog.we-online.de/pbs/datasheet/824014881.pdf) +UDFN SMD +0 +9 +9 +Package_DFN_QFN +UDFN-10_1.35x2.6mm_P0.5mm +http://www.st.com/content/ccc/resource/technical/document/datasheet/f2/11/8a/ed/40/31/40/56/DM00088292.pdf/files/DM00088292.pdf/jcr:content/translations/en.DM00088292.pdf +UDFN 0.5 uQFN +0 +10 +10 +Package_DFN_QFN +UFQFPN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm +UFQFPN, 32 Pin (https://www.st.com/resource/en/datasheet/stm32g071k8.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +UFQFPN NoLead +0 +37 +33 +Package_DFN_QFN +UFQFPN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm_ThermalVias +UFQFPN, 32 Pin (https://www.st.com/resource/en/datasheet/stm32g071k8.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +UFQFPN NoLead +0 +47 +33 +Package_DFN_QFN +UQFN-10_1.3x1.8mm_P0.4mm +UQFN, 10 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/00001725D.pdf (Page 9)), generated with kicad-footprint-generator ipc_noLead_generator.py +UQFN NoLead +0 +10 +10 +Package_DFN_QFN +UQFN-10_1.4x1.8mm_P0.4mm +UQFN 10pin, https://www.onsemi.com/pub/Collateral/488AT.PDF +UQFN-10_1.4x1.8mm_P0.4mm +0 +10 +10 +Package_DFN_QFN +UQFN-10_1.6x2.1mm_P0.5mm +UQFN, 10 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/00001725D.pdf (Page 12)), generated with kicad-footprint-generator ipc_noLead_generator.py +UQFN NoLead +0 +10 +10 +Package_DFN_QFN +UQFN-16-1EP_3x3mm_P0.5mm_EP1.75x1.75mm +16-Lead Ultra Thin Quad Flat, No Lead Package (UC) - 3x3x0.5 mm Body [UQFN]; (see Microchip Packaging Specification 00000049BS.pdf) +QFN 0.5 +0 +21 +17 +Package_DFN_QFN +UQFN-16-1EP_4x4mm_P0.65mm_EP2.6x2.6mm +UQFN, 16 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/16L_UQFN_4x4x0_5mm_JQ_C04257A.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +UQFN NoLead +0 +21 +17 +Package_DFN_QFN +UQFN-16-1EP_4x4mm_P0.65mm_EP2.6x2.6mm_ThermalVias +UQFN, 16 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/16L_UQFN_4x4x0_5mm_JQ_C04257A.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +UQFN NoLead +0 +31 +17 +Package_DFN_QFN +UQFN-16-1EP_4x4mm_P0.65mm_EP2.7x2.7mm +16-Lead Ultra Thin Plastic Quad Flat, No Lead Package (JQ) - 4x4x0.5 mm Body [UQFN]; (see Microchip Packaging Specification 00000049BS.pdf) +QFN 0.65 +0 +21 +17 +Package_DFN_QFN +UQFN-20-1EP_3x3mm_P0.4mm_EP1.85x1.85mm +UQFN, 20 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=332), generated with kicad-footprint-generator ipc_noLead_generator.py +UQFN NoLead +0 +25 +21 +Package_DFN_QFN +UQFN-20-1EP_3x3mm_P0.4mm_EP1.85x1.85mm_ThermalVias +UQFN, 20 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=332), generated with kicad-footprint-generator ipc_noLead_generator.py +UQFN NoLead +0 +30 +21 +Package_DFN_QFN +UQFN-20-1EP_4x4mm_P0.5mm_EP2.8x2.8mm +UQFN, 20 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/40001839B.pdf#page=464), generated with kicad-footprint-generator ipc_noLead_generator.py +UQFN NoLead +0 +25 +21 +Package_DFN_QFN +UQFN-20-1EP_4x4mm_P0.5mm_EP2.8x2.8mm_ThermalVias +UQFN, 20 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/40001839B.pdf#page=464), generated with kicad-footprint-generator ipc_noLead_generator.py +UQFN NoLead +0 +35 +21 +Package_DFN_QFN +UQFN-20_3x3mm_P0.4mm +UQFN, 20 Pin (https://resurgentsemi.com/wp-content/uploads/2018/09/MPR121_rev5-Resurgent.pdf?d453f8&d453f8), generated with kicad-footprint-generator ipc_noLead_generator.py +UQFN NoLead +0 +20 +20 +Package_DFN_QFN +UQFN-28-1EP_4x4mm_P0.4mm_EP2.35x2.35mm +UQFN, 28 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=338), generated with kicad-footprint-generator ipc_noLead_generator.py +UQFN NoLead +0 +33 +29 +Package_DFN_QFN +UQFN-28-1EP_4x4mm_P0.4mm_EP2.35x2.35mm_ThermalVias +UQFN, 28 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=338), generated with kicad-footprint-generator ipc_noLead_generator.py +UQFN NoLead +0 +43 +29 +Package_DFN_QFN +UQFN-40-1EP_5x5mm_P0.4mm_EP3.8x3.8mm +UQFN, 40 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=345), generated with kicad-footprint-generator ipc_noLead_generator.py +UQFN NoLead +0 +50 +41 +Package_DFN_QFN +UQFN-40-1EP_5x5mm_P0.4mm_EP3.8x3.8mm_ThermalVias +UQFN, 40 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=345), generated with kicad-footprint-generator ipc_noLead_generator.py +UQFN NoLead +0 +67 +41 +Package_DFN_QFN +UQFN-48-1EP_6x6mm_P0.4mm_EP4.45x4.45mm +UQFN, 48 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=347), generated with kicad-footprint-generator ipc_noLead_generator.py +UQFN NoLead +0 +58 +49 +Package_DFN_QFN +UQFN-48-1EP_6x6mm_P0.4mm_EP4.45x4.45mm_ThermalVias +UQFN, 48 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=347), generated with kicad-footprint-generator ipc_noLead_generator.py +UQFN NoLead +0 +75 +49 +Package_DFN_QFN +UQFN-48-1EP_6x6mm_P0.4mm_EP4.62x4.62mm +UQFN, 48 Pin (https://github.com/KiCad/kicad-symbols/pull/1189#issuecomment-449506354), generated with kicad-footprint-generator ipc_noLead_generator.py +UQFN NoLead +0 +53 +49 +Package_DFN_QFN +UQFN-48-1EP_6x6mm_P0.4mm_EP4.62x4.62mm_ThermalVias +UQFN, 48 Pin (https://github.com/KiCad/kicad-symbols/pull/1189#issuecomment-449506354), generated with kicad-footprint-generator ipc_noLead_generator.py +UQFN NoLead +0 +75 +49 +Package_DFN_QFN +VDFN-8-1EP_2x2mm_P0.5mm_EP0.9x1.7mm +8-Lead Very Thin Dual Flatpack No-Lead (LZ) - 2x3x0.9 mm Body [VDFN] (see Microchip Packaging Specification 00000049BS.pdf) +DFN 0.5 +0 +11 +9 +Package_DFN_QFN +VQFN-16-1EP_3x3mm_P0.5mm_EP1.1x1.1mm +VQFN, 16 Pin (https://ww1.microchip.com/downloads/en/DeviceDoc/16L_VQFN-WFS_3x3mm_4MX_C04-00508a.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +VQFN NoLead +0 +18 +17 +Package_DFN_QFN +VQFN-16-1EP_3x3mm_P0.5mm_EP1.1x1.1mm_ThermalVias +VQFN, 16 Pin (https://ww1.microchip.com/downloads/en/DeviceDoc/16L_VQFN-WFS_3x3mm_4MX_C04-00508a.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +VQFN NoLead +0 +23 +17 +Package_DFN_QFN +VQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm +VQFN, 16 Pin (http://www.ti.com/lit/ds/symlink/cdclvp1102.pdf#page=28), generated with kicad-footprint-generator ipc_noLead_generator.py +VQFN NoLead +0 +21 +17 +Package_DFN_QFN +VQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm_ThermalVias +VQFN, 16 Pin (http://www.ti.com/lit/ds/symlink/cdclvp1102.pdf#page=28), generated with kicad-footprint-generator ipc_noLead_generator.py +VQFN NoLead +0 +26 +17 +Package_DFN_QFN +VQFN-16-1EP_3x3mm_P0.5mm_EP1.8x1.8mm +VQFN, 16 Pin (https://www.st.com/resource/en/datasheet/stspin220.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +VQFN NoLead +0 +21 +17 +Package_DFN_QFN +VQFN-16-1EP_3x3mm_P0.5mm_EP1.8x1.8mm_ThermalVias +VQFN, 16 Pin (https://www.st.com/resource/en/datasheet/stspin220.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +VQFN NoLead +0 +26 +17 +Package_DFN_QFN +VQFN-16-1EP_3x3mm_P0.5mm_EP1.45x1.45mm +VQFN, 16 Pin (http://www.ti.com/lit/ds/sbos354a/sbos354a.pdf, JEDEC MO-220 variant VEED-6), generated with kicad-footprint-generator ipc_noLead_generator.py +VQFN NoLead +0 +21 +17 +Package_DFN_QFN +VQFN-16-1EP_3x3mm_P0.5mm_EP1.45x1.45mm_ThermalVias +VQFN, 16 Pin (http://www.ti.com/lit/ds/sbos354a/sbos354a.pdf, JEDEC MO-220 variant VEED-6), generated with kicad-footprint-generator ipc_noLead_generator.py +VQFN NoLead +0 +26 +17 +Package_DFN_QFN +VQFN-16-1EP_3x3mm_P0.5mm_EP1.68x1.68mm +VQFN, 16 Pin (http://www.ti.com/lit/ds/symlink/tlv62095.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +VQFN NoLead +0 +21 +17 +Package_DFN_QFN +VQFN-16-1EP_3x3mm_P0.5mm_EP1.68x1.68mm_ThermalVias +VQFN, 16 Pin (http://www.ti.com/lit/ds/symlink/tlv62095.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +VQFN NoLead +0 +26 +17 +Package_DFN_QFN +VQFN-20-1EP_3x3mm_P0.4mm_EP1.7x1.7mm +VQFN, 20 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/20%20Lead%20VQFN%203x3x0_9mm_1_7EP%20U2B%20C04-21496a.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +VQFN NoLead +0 +25 +21 +Package_DFN_QFN +VQFN-20-1EP_3x3mm_P0.4mm_EP1.7x1.7mm_ThermalVias +VQFN, 20 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/20%20Lead%20VQFN%203x3x0_9mm_1_7EP%20U2B%20C04-21496a.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +VQFN NoLead +0 +30 +21 +Package_DFN_QFN +VQFN-20-1EP_3x3mm_P0.45mm_EP1.55x1.55mm +VQFN, 20 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/doc8246.pdf#page=264), generated with kicad-footprint-generator ipc_noLead_generator.py +VQFN NoLead +0 +25 +21 +Package_DFN_QFN +VQFN-20-1EP_3x3mm_P0.45mm_EP1.55x1.55mm_ThermalVias +VQFN, 20 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/doc8246.pdf#page=264), generated with kicad-footprint-generator ipc_noLead_generator.py +VQFN NoLead +0 +30 +21 +Package_DFN_QFN +VQFN-24-1EP_4x4mm_P0.5mm_EP2.5x2.5mm +VQFN, 24 Pin (https://ww1.microchip.com/downloads/aemDocuments/documents/product-documents/package-drawings/24L-VQFN%E2%80%934x4x0.9mm-MJ-C04-00143b.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +VQFN NoLead +0 +29 +25 +Package_DFN_QFN +VQFN-24-1EP_4x4mm_P0.5mm_EP2.5x2.5mm_ThermalVias +VQFN, 24 Pin (https://ww1.microchip.com/downloads/aemDocuments/documents/product-documents/package-drawings/24L-VQFN%E2%80%934x4x0.9mm-MJ-C04-00143b.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +VQFN NoLead +0 +39 +25 +Package_DFN_QFN +VQFN-24-1EP_4x4mm_P0.5mm_EP2.45x2.45mm +VQFN, 24 Pin (http://www.ti.com/lit/ds/symlink/msp430f1101a.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +VQFN NoLead +0 +34 +25 +Package_DFN_QFN +VQFN-24-1EP_4x4mm_P0.5mm_EP2.45x2.45mm_ThermalVias +VQFN, 24 Pin (http://www.ti.com/lit/ds/symlink/msp430f1101a.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +VQFN NoLead +0 +39 +25 +Package_DFN_QFN +VQFN-28-1EP_4x4mm_P0.45mm_EP2.4x2.4mm +VQFN, 28 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-9505-AT42-QTouch-BSW-AT42QT1060_Datasheet.pdf#page=28), generated with kicad-footprint-generator ipc_noLead_generator.py +VQFN NoLead +0 +33 +29 +Package_DFN_QFN +VQFN-28-1EP_4x4mm_P0.45mm_EP2.4x2.4mm_ThermalVias +VQFN, 28 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-9505-AT42-QTouch-BSW-AT42QT1060_Datasheet.pdf#page=28), generated with kicad-footprint-generator ipc_noLead_generator.py +VQFN NoLead +0 +43 +29 +Package_DFN_QFN +VQFN-28-1EP_4x5mm_P0.5mm_EP2.55x3.55mm +VQFN, 28 Pin (http://www.ti.com/lit/ds/symlink/lm5175.pdf#page=40), generated with kicad-footprint-generator ipc_noLead_generator.py +VQFN NoLead +0 +35 +29 +Package_DFN_QFN +VQFN-28-1EP_4x5mm_P0.5mm_EP2.55x3.55mm_ThermalVias +VQFN, 28 Pin (http://www.ti.com/lit/ds/symlink/lm5175.pdf#page=40), generated with kicad-footprint-generator ipc_noLead_generator.py +VQFN NoLead +0 +48 +29 +Package_DFN_QFN +VQFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm +VQFN, 32 Pin (http://ww1.microchip.com/downloads/en/devicedoc/atmel-9520-at42-qtouch-bsw-at42qt1110_datasheet.pdf#page=42), generated with kicad-footprint-generator ipc_noLead_generator.py +VQFN NoLead +0 +37 +33 +Package_DFN_QFN +VQFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm_ThermalVias +VQFN, 32 Pin (http://ww1.microchip.com/downloads/en/devicedoc/atmel-9520-at42-qtouch-bsw-at42qt1110_datasheet.pdf#page=42), generated with kicad-footprint-generator ipc_noLead_generator.py +VQFN NoLead +0 +47 +33 +Package_DFN_QFN +VQFN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm +VQFN, 32 Pin (https://www.ftdichip.com/Support/Documents/DataSheets/ICs/DS_FT4222H.pdf#page=40), generated with kicad-footprint-generator ipc_noLead_generator.py +VQFN NoLead +0 +37 +33 +Package_DFN_QFN +VQFN-32-1EP_5x5mm_P0.5mm_EP3.5x3.5mm_ThermalVias +VQFN, 32 Pin (https://www.ftdichip.com/Support/Documents/DataSheets/ICs/DS_FT4222H.pdf#page=40), generated with kicad-footprint-generator ipc_noLead_generator.py +VQFN NoLead +0 +47 +33 +Package_DFN_QFN +VQFN-32-1EP_5x5mm_P0.5mm_EP3.15x3.15mm +VQFN, 32 Pin (https://www.ti.com/lit/ds/slvs589d/slvs589d.pdf#page=33), generated with kicad-footprint-generator ipc_noLead_generator.py +VQFN NoLead +0 +37 +33 +Package_DFN_QFN +VQFN-32-1EP_5x5mm_P0.5mm_EP3.15x3.15mm_ThermalVias +VQFN, 32 Pin (https://www.ti.com/lit/ds/slvs589d/slvs589d.pdf#page=33), generated with kicad-footprint-generator ipc_noLead_generator.py +VQFN NoLead +0 +47 +33 +Package_DFN_QFN +VQFN-46-1EP_5x6mm_P0.4mm_EP2.8x3.8mm +VQFN, 46 Pin (http://www.ti.com/lit/ds/symlink/lp5036.pdf#page=59), generated with kicad-footprint-generator ipc_noLead_generator.py +VQFN NoLead +0 +53 +47 +Package_DFN_QFN +VQFN-46-1EP_5x6mm_P0.4mm_EP2.8x3.8mm_ThermalVias +VQFN, 46 Pin (http://www.ti.com/lit/ds/symlink/lp5036.pdf#page=59), generated with kicad-footprint-generator ipc_noLead_generator.py +VQFN NoLead +0 +66 +47 +Package_DFN_QFN +VQFN-48-1EP_6x6mm_P0.4mm_EP4.1x4.1mm +VQFN, 48 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/48L_VQFN_6x6mm_6LX_C04-00494a.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +VQFN NoLead +0 +58 +49 +Package_DFN_QFN +VQFN-48-1EP_6x6mm_P0.4mm_EP4.1x4.1mm_ThermalVias +VQFN, 48 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/48L_VQFN_6x6mm_6LX_C04-00494a.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +VQFN NoLead +0 +75 +49 +Package_DFN_QFN +VQFN-48-1EP_7x7mm_P0.5mm_EP4.1x4.1mm +VQFN, 48 Pin (http://www.ti.com/lit/ds/symlink/cc430f5137.pdf#page=128), generated with kicad-footprint-generator ipc_noLead_generator.py +VQFN NoLead +0 +58 +49 +Package_DFN_QFN +VQFN-48-1EP_7x7mm_P0.5mm_EP4.1x4.1mm_ThermalVias +VQFN, 48 Pin (http://www.ti.com/lit/ds/symlink/cc430f5137.pdf#page=128), generated with kicad-footprint-generator ipc_noLead_generator.py +VQFN NoLead +0 +75 +49 +Package_DFN_QFN +VQFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm +VQFN, 48 Pin (http://www.ti.com/lit/ds/symlink/cc1312r.pdf#page=48), generated with kicad-footprint-generator ipc_noLead_generator.py +VQFN NoLead +0 +53 +49 +Package_DFN_QFN +VQFN-48-1EP_7x7mm_P0.5mm_EP5.15x5.15mm_ThermalVias +VQFN, 48 Pin (http://www.ti.com/lit/ds/symlink/cc1312r.pdf#page=48), generated with kicad-footprint-generator ipc_noLead_generator.py +VQFN NoLead +0 +79 +49 +Package_DFN_QFN +VQFN-64-1EP_9x9mm_P0.5mm_EP5.4x5.4mm +VQFN, 64 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/PIC16LF19195-6-7-Data-Sheet-40001873D.pdf#page=718), generated with kicad-footprint-generator ipc_noLead_generator.py +VQFN NoLead +0 +74 +65 +Package_DFN_QFN +VQFN-64-1EP_9x9mm_P0.5mm_EP5.4x5.4mm_ThermalVias +VQFN, 64 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/PIC16LF19195-6-7-Data-Sheet-40001873D.pdf#page=718), generated with kicad-footprint-generator ipc_noLead_generator.py +VQFN NoLead +0 +100 +65 +Package_DFN_QFN +VQFN-64-1EP_9x9mm_P0.5mm_EP7.15x7.15mm +VQFN, 64 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/64L_QFN_9x9_MR_C04-00149e.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +VQFN NoLead +0 +74 +65 +Package_DFN_QFN +VQFN-64-1EP_9x9mm_P0.5mm_EP7.15x7.15mm_ThermalVias +VQFN, 64 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/64L_QFN_9x9_MR_C04-00149e.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +VQFN NoLead +0 +91 +65 +Package_DFN_QFN +Vishay_PowerPAK_MLP44-24L +PowerPAK PowerPAK MLP44-24L (https://www.vishay.com/docs/78231/mlp44-24l.pdf) +powerpak mlp44-24l +0 +28 +28 +Package_DFN_QFN +Vishay_PowerPAK_MLP44-24L_ThermalVias +PowerPAK PowerPAK MLP44-24L (https://www.vishay.com/docs/78231/mlp44-24l.pdf) +powerpak mlp44-24l +0 +35 +28 +Package_DFN_QFN +W-PDFN-8-1EP_6x5mm_P1.27mm_EP3x3mm +W-PDFN, 8 Pin (https://media-www.micron.com/-/media/client/global/documents/products/data-sheet/nor-flash/serial-nor/mt25q/die-rev-a/mt25q_qljs_u_256_aba_0.pdf#page=22), generated with kicad-footprint-generator ipc_noLead_generator.py +W-PDFN NoLead +0 +13 +9 +Package_DFN_QFN +WDFN-6-2EP_4.0x2.6mm_P0.65mm +WDFN, 6 pin, 4.0x2.6, 0.65P; Two exposed pads, (https://www.onsemi.com/pub/Collateral/511BZ.PDF) +DFN 0.65P dual flag +0 +8 +8 +Package_DFN_QFN +WDFN-8-1EP_2x2.2mm_P0.5mm_EP0.80x0.54 +https://www.onsemi.com/pub/Collateral/511BN.PDF +WDFN-8 1EP 2.2X2.0 0.5P +0 +9 +9 +Package_DFN_QFN +WDFN-8-1EP_2x2mm_P0.5mm_EP0.8x1.2mm +WDFN, 8 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/20005474E.pdf#page=25), generated with kicad-footprint-generator ipc_noLead_generator.py +WDFN NoLead +0 +13 +9 +Package_DFN_QFN +WDFN-8-1EP_3x2mm_P0.5mm_EP1.3x1.4mm +WDFN, 8 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/8L_TDFN_2x3_MNY_C04-0129E-MNY.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +WDFN NoLead +0 +13 +9 +Package_DFN_QFN +WDFN-8-1EP_4x3mm_P0.65mm_EP2.4x1.8mm +WDFN, 8 Pin (https://www.onsemi.com/pub/Collateral/509AF.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py +WDFN NoLead +0 +13 +9 +Package_DFN_QFN +WDFN-8-1EP_4x3mm_P0.65mm_EP2.4x1.8mm_ThermalVias +WDFN, 8 Pin (https://www.onsemi.com/pub/Collateral/509AF.PDF), generated with kicad-footprint-generator ipc_noLead_generator.py +WDFN NoLead +0 +20 +9 +Package_DFN_QFN +WDFN-8-1EP_6x5mm_P1.27mm_EP3.4x4mm +WDFN, 8 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/8L_WDFN_5x6mm_MF_C04210B.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +WDFN NoLead +0 +13 +9 +Package_DFN_QFN +WDFN-8_2x2mm_P0.5mm +DFN8 2x2, 0.5P; No exposed pad (http://www.onsemi.com/pub/Collateral/NCP4308-D.PDF) +DFN 0.5 +0 +8 +8 +Package_DFN_QFN +WDFN-10-1EP_3x3mm_P0.5mm_EP1.8x2.5mm +WDFN, 10 Pin (https://www.onsemi.com/pdf/datasheet/nis5420-d.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +WDFN NoLead +0 +15 +11 +Package_DFN_QFN +WDFN-10-1EP_3x3mm_P0.5mm_EP1.8x2.5mm_ThermalVias +WDFN, 10 Pin (https://www.onsemi.com/pdf/datasheet/nis5420-d.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +WDFN NoLead +0 +22 +11 +Package_DFN_QFN +WDFN-12-1EP_3x3mm_P0.45mm_EP1.7x2.5mm +WDFN, 12 Pin (https://www.diodes.com/assets/Datasheets/PAM2306.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +WDFN NoLead +0 +17 +13 +Package_DFN_QFN +WQFN-14-1EP_2.5x2.5mm_P0.5mm_EP1.45x1.45mm +WQFN, 14 Pin (https://www.onsemi.com/pub/Collateral/FUSB302B-D.PDF#page=32), generated with kicad-footprint-generator ipc_noLead_generator.py +WQFN NoLead +0 +19 +15 +Package_DFN_QFN +WQFN-14-1EP_2.5x2.5mm_P0.5mm_EP1.45x1.45mm_ThermalVias +WQFN, 14 Pin (https://www.onsemi.com/pub/Collateral/FUSB302B-D.PDF#page=32), generated with kicad-footprint-generator ipc_noLead_generator.py +WQFN NoLead +0 +24 +15 +Package_DFN_QFN +WQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm +WQFN, 16 Pin (https://www.ti.com/lit/ds/symlink/tpa6132a2.pdf#page=24), generated with kicad-footprint-generator ipc_noLead_generator.py +WQFN NoLead +0 +21 +17 +Package_DFN_QFN +WQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm_ThermalVias +WQFN, 16 Pin (https://www.ti.com/lit/ds/symlink/tpa6132a2.pdf#page=24), generated with kicad-footprint-generator ipc_noLead_generator.py +WQFN NoLead +0 +26 +17 +Package_DFN_QFN +WQFN-16-1EP_3x3mm_P0.5mm_EP1.68x1.68mm +WQFN, 16 Pin (https://www.ti.com/lit/ds/symlink/tlv9064.pdf#page=44), generated with kicad-footprint-generator ipc_noLead_generator.py +WQFN NoLead +0 +21 +17 +Package_DFN_QFN +WQFN-16-1EP_3x3mm_P0.5mm_EP1.68x1.68mm_ThermalVias +WQFN, 16 Pin (https://www.ti.com/lit/ds/symlink/tlv9064.pdf#page=44), generated with kicad-footprint-generator ipc_noLead_generator.py +WQFN NoLead +0 +26 +17 +Package_DFN_QFN +WQFN-16-1EP_3x3mm_P0.5mm_EP1.75x1.75mm +WQFN, 16 Pin (https://www.onsemi.com/pub/Collateral/FUSB307B-D.PDF#page=56), generated with kicad-footprint-generator ipc_noLead_generator.py +WQFN NoLead +0 +21 +17 +Package_DFN_QFN +WQFN-16-1EP_3x3mm_P0.5mm_EP1.75x1.75mm_ThermalVias +WQFN, 16 Pin (https://www.onsemi.com/pub/Collateral/FUSB307B-D.PDF#page=56), generated with kicad-footprint-generator ipc_noLead_generator.py +WQFN NoLead +0 +26 +17 +Package_DFN_QFN +WQFN-16-1EP_4x4mm_P0.5mm_EP2.6x2.6mm +WQFN, 16 Pin (http://www.ti.com/lit/ds/symlink/ldc1312.pdf#page=59), generated with kicad-footprint-generator ipc_noLead_generator.py +WQFN NoLead +0 +21 +17 +Package_DFN_QFN +WQFN-16-1EP_4x4mm_P0.5mm_EP2.6x2.6mm_ThermalVias +WQFN, 16 Pin (http://www.ti.com/lit/ds/symlink/ldc1312.pdf#page=59), generated with kicad-footprint-generator ipc_noLead_generator.py +WQFN NoLead +0 +31 +17 +Package_DFN_QFN +WQFN-20-1EP_2.5x4.5mm_P0.5mm_EP1x2.9mm +http://www.onsemi.com/pub/Collateral/510CD.PDF +WQFN-20 4.5mm 2.5mm 0.5mm +0 +24 +21 +Package_DFN_QFN +WQFN-20-1EP_3x3mm_P0.4mm_EP1.7x1.7mm +WQFN, 20 Pin (https://www.ti.com/lit/ds/symlink/ts3ds10224.pdf#page=29), generated with kicad-footprint-generator ipc_noLead_generator.py +WQFN NoLead +0 +25 +21 +Package_DFN_QFN +WQFN-20-1EP_3x3mm_P0.4mm_EP1.7x1.7mm_ThermalVias +WQFN, 20 Pin (https://www.ti.com/lit/ds/symlink/ts3ds10224.pdf#page=29), generated with kicad-footprint-generator ipc_noLead_generator.py +WQFN NoLead +0 +30 +21 +Package_DFN_QFN +WQFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm +WQFN, 24 Pin (http://www.ti.com/lit/ds/symlink/lm26480.pdf#page=39), generated with kicad-footprint-generator ipc_noLead_generator.py +WQFN NoLead +0 +29 +25 +Package_DFN_QFN +WQFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm_ThermalVias +WQFN, 24 Pin (http://www.ti.com/lit/ds/symlink/lm26480.pdf#page=39), generated with kicad-footprint-generator ipc_noLead_generator.py +WQFN NoLead +0 +39 +25 +Package_DFN_QFN +WQFN-24-1EP_4x4mm_P0.5mm_EP2.45x2.45mm +WQFN, 24 Pin (http://www.ti.com/lit/ds/symlink/ts3a27518e.pdf#page=33), generated with kicad-footprint-generator ipc_noLead_generator.py +WQFN NoLead +0 +29 +25 +Package_DFN_QFN +WQFN-24-1EP_4x4mm_P0.5mm_EP2.45x2.45mm_ThermalVias +WQFN, 24 Pin (http://www.ti.com/lit/ds/symlink/ts3a27518e.pdf#page=33), generated with kicad-footprint-generator ipc_noLead_generator.py +WQFN NoLead +0 +39 +25 +Package_DFN_QFN +WQFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm +QFN, 32-Leads, Body 5x5x0.8mm, Pitch 0.5mm, Thermal Pad 3.1x3.1mm; (see Texas Instruments LM25119 http://www.ti.com/lit/ds/symlink/lm25119.pdf) +WQFN 0.5 +0 +37 +33 +Package_DFN_QFN +WQFN-42-1EP_3.5x9mm_P0.5mm_EP2.05x7.55mm +WQFN, 42 Pin (http://www.ti.com/lit/ds/symlink/ts3l501e.pdf#page=23), generated with kicad-footprint-generator ipc_noLead_generator.py +WQFN NoLead +0 +57 +43 +Package_DFN_QFN +WQFN-42-1EP_3.5x9mm_P0.5mm_EP2.05x7.55mm_ThermalVias +WQFN, 42 Pin (http://www.ti.com/lit/ds/symlink/ts3l501e.pdf#page=23), generated with kicad-footprint-generator ipc_noLead_generator.py +WQFN NoLead +0 +82 +43 +Package_DIP +DIP-4_W7.62mm +4-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils) +THT DIP DIL PDIP 2.54mm 7.62mm 300mil +0 +4 +4 +Package_DIP +DIP-4_W7.62mm_LongPads +4-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), LongPads +THT DIP DIL PDIP 2.54mm 7.62mm 300mil LongPads +0 +4 +4 +Package_DIP +DIP-4_W7.62mm_SMDSocket_SmallPads +4-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), SMDSocket, SmallPads +THT DIP DIL PDIP 2.54mm 7.62mm 300mil SMDSocket SmallPads +0 +4 +4 +Package_DIP +DIP-4_W7.62mm_Socket +4-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), Socket +THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket +0 +4 +4 +Package_DIP +DIP-4_W7.62mm_Socket_LongPads +4-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), Socket, LongPads +THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket LongPads +0 +4 +4 +Package_DIP +DIP-4_W8.89mm_SMDSocket_LongPads +4-lead though-hole mounted DIP package, row spacing 8.89 mm (350 mils), SMDSocket, LongPads +THT DIP DIL PDIP 2.54mm 8.89mm 350mil SMDSocket LongPads +0 +4 +4 +Package_DIP +DIP-4_W10.16mm +4-lead though-hole mounted DIP package, row spacing 10.16 mm (400 mils) +THT DIP DIL PDIP 2.54mm 10.16mm 400mil +0 +4 +4 +Package_DIP +DIP-4_W10.16mm_LongPads +4-lead though-hole mounted DIP package, row spacing 10.16 mm (400 mils), LongPads +THT DIP DIL PDIP 2.54mm 10.16mm 400mil LongPads +0 +4 +4 +Package_DIP +DIP-5-6_W7.62mm +5-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils) +THT DIP DIL PDIP 2.54mm 7.62mm 300mil +0 +5 +5 +Package_DIP +DIP-5-6_W7.62mm_LongPads +5-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), LongPads +THT DIP DIL PDIP 2.54mm 7.62mm 300mil LongPads +0 +5 +5 +Package_DIP +DIP-5-6_W7.62mm_SMDSocket_SmallPads +5-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), SMDSocket, SmallPads +THT DIP DIL PDIP 2.54mm 7.62mm 300mil SMDSocket SmallPads +0 +5 +5 +Package_DIP +DIP-5-6_W7.62mm_Socket +5-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), Socket +THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket +0 +5 +5 +Package_DIP +DIP-5-6_W7.62mm_Socket_LongPads +5-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), Socket, LongPads +THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket LongPads +0 +5 +5 +Package_DIP +DIP-5-6_W8.89mm_SMDSocket_LongPads +5-lead though-hole mounted DIP package, row spacing 8.89 mm (350 mils), SMDSocket, LongPads +THT DIP DIL PDIP 2.54mm 8.89mm 350mil SMDSocket LongPads +0 +5 +5 +Package_DIP +DIP-5-6_W10.16mm +5-lead though-hole mounted DIP package, row spacing 10.16 mm (400 mils) +THT DIP DIL PDIP 2.54mm 10.16mm 400mil +0 +5 +5 +Package_DIP +DIP-5-6_W10.16mm_LongPads +5-lead though-hole mounted DIP package, row spacing 10.16 mm (400 mils), LongPads +THT DIP DIL PDIP 2.54mm 10.16mm 400mil LongPads +0 +5 +5 +Package_DIP +DIP-6_W7.62mm +6-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils) +THT DIP DIL PDIP 2.54mm 7.62mm 300mil +0 +6 +6 +Package_DIP +DIP-6_W7.62mm_LongPads +6-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), LongPads +THT DIP DIL PDIP 2.54mm 7.62mm 300mil LongPads +0 +6 +6 +Package_DIP +DIP-6_W7.62mm_SMDSocket_SmallPads +6-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), SMDSocket, SmallPads +THT DIP DIL PDIP 2.54mm 7.62mm 300mil SMDSocket SmallPads +0 +6 +6 +Package_DIP +DIP-6_W7.62mm_Socket +6-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), Socket +THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket +0 +6 +6 +Package_DIP +DIP-6_W7.62mm_Socket_LongPads +6-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), Socket, LongPads +THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket LongPads +0 +6 +6 +Package_DIP +DIP-6_W8.89mm_SMDSocket_LongPads +6-lead though-hole mounted DIP package, row spacing 8.89 mm (350 mils), SMDSocket, LongPads +THT DIP DIL PDIP 2.54mm 8.89mm 350mil SMDSocket LongPads +0 +6 +6 +Package_DIP +DIP-6_W10.16mm +6-lead though-hole mounted DIP package, row spacing 10.16 mm (400 mils) +THT DIP DIL PDIP 2.54mm 10.16mm 400mil +0 +6 +6 +Package_DIP +DIP-6_W10.16mm_LongPads +6-lead though-hole mounted DIP package, row spacing 10.16 mm (400 mils), LongPads +THT DIP DIL PDIP 2.54mm 10.16mm 400mil LongPads +0 +6 +6 +Package_DIP +DIP-8-16_W7.62mm +16-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils) +THT DIP DIL PDIP 2.54mm 7.62mm 300mil +0 +8 +8 +Package_DIP +DIP-8-16_W7.62mm_Socket +16-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), Socket +THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket +0 +8 +8 +Package_DIP +DIP-8-16_W7.62mm_Socket_LongPads +16-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), Socket, LongPads +THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket LongPads +0 +8 +8 +Package_DIP +DIP-8-N6_W7.62mm +8-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), missing pin 6 +THT DIP DIL PDIP 2.54mm 7.62mm 300mil +0 +7 +7 +Package_DIP +DIP-8-N7_W7.62mm +8-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), missing pin 7 +THT DIP DIL PDIP 2.54mm 7.62mm 300mil +0 +7 +7 +Package_DIP +DIP-8_W7.62mm +8-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils) +THT DIP DIL PDIP 2.54mm 7.62mm 300mil +0 +8 +8 +Package_DIP +DIP-8_W7.62mm_LongPads +8-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), LongPads +THT DIP DIL PDIP 2.54mm 7.62mm 300mil LongPads +0 +8 +8 +Package_DIP +DIP-8_W7.62mm_SMDSocket_SmallPads +8-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), SMDSocket, SmallPads +THT DIP DIL PDIP 2.54mm 7.62mm 300mil SMDSocket SmallPads +0 +8 +8 +Package_DIP +DIP-8_W7.62mm_Socket +8-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), Socket +THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket +0 +8 +8 +Package_DIP +DIP-8_W7.62mm_Socket_LongPads +8-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), Socket, LongPads +THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket LongPads +0 +8 +8 +Package_DIP +DIP-8_W8.89mm_SMDSocket_LongPads +8-lead though-hole mounted DIP package, row spacing 8.89 mm (350 mils), SMDSocket, LongPads +THT DIP DIL PDIP 2.54mm 8.89mm 350mil SMDSocket LongPads +0 +8 +8 +Package_DIP +DIP-8_W10.16mm +8-lead though-hole mounted DIP package, row spacing 10.16 mm (400 mils) +THT DIP DIL PDIP 2.54mm 10.16mm 400mil +0 +8 +8 +Package_DIP +DIP-8_W10.16mm_LongPads +8-lead though-hole mounted DIP package, row spacing 10.16 mm (400 mils), LongPads +THT DIP DIL PDIP 2.54mm 10.16mm 400mil LongPads +0 +8 +8 +Package_DIP +DIP-10_W7.62mm +10-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils) +THT DIP DIL PDIP 2.54mm 7.62mm 300mil +0 +10 +10 +Package_DIP +DIP-10_W7.62mm_LongPads +10-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), LongPads +THT DIP DIL PDIP 2.54mm 7.62mm 300mil LongPads +0 +10 +10 +Package_DIP +DIP-10_W7.62mm_SMDSocket_SmallPads +10-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), SMDSocket, SmallPads +THT DIP DIL PDIP 2.54mm 7.62mm 300mil SMDSocket SmallPads +0 +10 +10 +Package_DIP +DIP-10_W7.62mm_Socket +10-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), Socket +THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket +0 +10 +10 +Package_DIP +DIP-10_W7.62mm_Socket_LongPads +10-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), Socket, LongPads +THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket LongPads +0 +10 +10 +Package_DIP +DIP-10_W8.89mm_SMDSocket_LongPads +10-lead though-hole mounted DIP package, row spacing 8.89 mm (350 mils), SMDSocket, LongPads +THT DIP DIL PDIP 2.54mm 8.89mm 350mil SMDSocket LongPads +0 +10 +10 +Package_DIP +DIP-10_W10.16mm +10-lead though-hole mounted DIP package, row spacing 10.16 mm (400 mils) +THT DIP DIL PDIP 2.54mm 10.16mm 400mil +0 +10 +10 +Package_DIP +DIP-10_W10.16mm_LongPads +10-lead though-hole mounted DIP package, row spacing 10.16 mm (400 mils), LongPads +THT DIP DIL PDIP 2.54mm 10.16mm 400mil LongPads +0 +10 +10 +Package_DIP +DIP-12_W7.62mm +12-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils) +THT DIP DIL PDIP 2.54mm 7.62mm 300mil +0 +12 +12 +Package_DIP +DIP-12_W7.62mm_LongPads +12-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), LongPads +THT DIP DIL PDIP 2.54mm 7.62mm 300mil LongPads +0 +12 +12 +Package_DIP +DIP-12_W7.62mm_SMDSocket_SmallPads +12-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), SMDSocket, SmallPads +THT DIP DIL PDIP 2.54mm 7.62mm 300mil SMDSocket SmallPads +0 +12 +12 +Package_DIP +DIP-12_W7.62mm_Socket +12-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), Socket +THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket +0 +12 +12 +Package_DIP +DIP-12_W7.62mm_Socket_LongPads +12-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), Socket, LongPads +THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket LongPads +0 +12 +12 +Package_DIP +DIP-12_W8.89mm_SMDSocket_LongPads +12-lead though-hole mounted DIP package, row spacing 8.89 mm (350 mils), SMDSocket, LongPads +THT DIP DIL PDIP 2.54mm 8.89mm 350mil SMDSocket LongPads +0 +12 +12 +Package_DIP +DIP-12_W10.16mm +12-lead though-hole mounted DIP package, row spacing 10.16 mm (400 mils) +THT DIP DIL PDIP 2.54mm 10.16mm 400mil +0 +12 +12 +Package_DIP +DIP-12_W10.16mm_LongPads +12-lead though-hole mounted DIP package, row spacing 10.16 mm (400 mils), LongPads +THT DIP DIL PDIP 2.54mm 10.16mm 400mil LongPads +0 +12 +12 +Package_DIP +DIP-14_W7.62mm +14-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils) +THT DIP DIL PDIP 2.54mm 7.62mm 300mil +0 +14 +14 +Package_DIP +DIP-14_W7.62mm_LongPads +14-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), LongPads +THT DIP DIL PDIP 2.54mm 7.62mm 300mil LongPads +0 +14 +14 +Package_DIP +DIP-14_W7.62mm_SMDSocket_SmallPads +14-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), SMDSocket, SmallPads +THT DIP DIL PDIP 2.54mm 7.62mm 300mil SMDSocket SmallPads +0 +14 +14 +Package_DIP +DIP-14_W7.62mm_Socket +14-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), Socket +THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket +0 +14 +14 +Package_DIP +DIP-14_W7.62mm_Socket_LongPads +14-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), Socket, LongPads +THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket LongPads +0 +14 +14 +Package_DIP +DIP-14_W8.89mm_SMDSocket_LongPads +14-lead though-hole mounted DIP package, row spacing 8.89 mm (350 mils), SMDSocket, LongPads +THT DIP DIL PDIP 2.54mm 8.89mm 350mil SMDSocket LongPads +0 +14 +14 +Package_DIP +DIP-14_W10.16mm +14-lead though-hole mounted DIP package, row spacing 10.16 mm (400 mils) +THT DIP DIL PDIP 2.54mm 10.16mm 400mil +0 +14 +14 +Package_DIP +DIP-14_W10.16mm_LongPads +14-lead though-hole mounted DIP package, row spacing 10.16 mm (400 mils), LongPads +THT DIP DIL PDIP 2.54mm 10.16mm 400mil LongPads +0 +14 +14 +Package_DIP +DIP-16_W7.62mm +16-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils) +THT DIP DIL PDIP 2.54mm 7.62mm 300mil +0 +16 +16 +Package_DIP +DIP-16_W7.62mm_LongPads +16-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), LongPads +THT DIP DIL PDIP 2.54mm 7.62mm 300mil LongPads +0 +16 +16 +Package_DIP +DIP-16_W7.62mm_SMDSocket_SmallPads +16-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), SMDSocket, SmallPads +THT DIP DIL PDIP 2.54mm 7.62mm 300mil SMDSocket SmallPads +0 +16 +16 +Package_DIP +DIP-16_W7.62mm_Socket +16-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), Socket +THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket +0 +16 +16 +Package_DIP +DIP-16_W7.62mm_Socket_LongPads +16-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), Socket, LongPads +THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket LongPads +0 +16 +16 +Package_DIP +DIP-16_W8.89mm_SMDSocket_LongPads +16-lead though-hole mounted DIP package, row spacing 8.89 mm (350 mils), SMDSocket, LongPads +THT DIP DIL PDIP 2.54mm 8.89mm 350mil SMDSocket LongPads +0 +16 +16 +Package_DIP +DIP-16_W10.16mm +16-lead though-hole mounted DIP package, row spacing 10.16 mm (400 mils) +THT DIP DIL PDIP 2.54mm 10.16mm 400mil +0 +16 +16 +Package_DIP +DIP-16_W10.16mm_LongPads +16-lead though-hole mounted DIP package, row spacing 10.16 mm (400 mils), LongPads +THT DIP DIL PDIP 2.54mm 10.16mm 400mil LongPads +0 +16 +16 +Package_DIP +DIP-18_W7.62mm +18-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils) +THT DIP DIL PDIP 2.54mm 7.62mm 300mil +0 +18 +18 +Package_DIP +DIP-18_W7.62mm_LongPads +18-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), LongPads +THT DIP DIL PDIP 2.54mm 7.62mm 300mil LongPads +0 +18 +18 +Package_DIP +DIP-18_W7.62mm_SMDSocket_SmallPads +18-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), SMDSocket, SmallPads +THT DIP DIL PDIP 2.54mm 7.62mm 300mil SMDSocket SmallPads +0 +18 +18 +Package_DIP +DIP-18_W7.62mm_Socket +18-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), Socket +THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket +0 +18 +18 +Package_DIP +DIP-18_W7.62mm_Socket_LongPads +18-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), Socket, LongPads +THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket LongPads +0 +18 +18 +Package_DIP +DIP-18_W8.89mm_SMDSocket_LongPads +18-lead though-hole mounted DIP package, row spacing 8.89 mm (350 mils), SMDSocket, LongPads +THT DIP DIL PDIP 2.54mm 8.89mm 350mil SMDSocket LongPads +0 +18 +18 +Package_DIP +DIP-20_W7.62mm +20-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils) +THT DIP DIL PDIP 2.54mm 7.62mm 300mil +0 +20 +20 +Package_DIP +DIP-20_W7.62mm_LongPads +20-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), LongPads +THT DIP DIL PDIP 2.54mm 7.62mm 300mil LongPads +0 +20 +20 +Package_DIP +DIP-20_W7.62mm_SMDSocket_SmallPads +20-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), SMDSocket, SmallPads +THT DIP DIL PDIP 2.54mm 7.62mm 300mil SMDSocket SmallPads +0 +20 +20 +Package_DIP +DIP-20_W7.62mm_Socket +20-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), Socket +THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket +0 +20 +20 +Package_DIP +DIP-20_W7.62mm_Socket_LongPads +20-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), Socket, LongPads +THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket LongPads +0 +20 +20 +Package_DIP +DIP-20_W8.89mm_SMDSocket_LongPads +20-lead though-hole mounted DIP package, row spacing 8.89 mm (350 mils), SMDSocket, LongPads +THT DIP DIL PDIP 2.54mm 8.89mm 350mil SMDSocket LongPads +0 +20 +20 +Package_DIP +DIP-22_W7.62mm +22-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils) +THT DIP DIL PDIP 2.54mm 7.62mm 300mil +0 +22 +22 +Package_DIP +DIP-22_W7.62mm_LongPads +22-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), LongPads +THT DIP DIL PDIP 2.54mm 7.62mm 300mil LongPads +0 +22 +22 +Package_DIP +DIP-22_W7.62mm_SMDSocket_SmallPads +22-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), SMDSocket, SmallPads +THT DIP DIL PDIP 2.54mm 7.62mm 300mil SMDSocket SmallPads +0 +22 +22 +Package_DIP +DIP-22_W7.62mm_Socket +22-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), Socket +THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket +0 +22 +22 +Package_DIP +DIP-22_W7.62mm_Socket_LongPads +22-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), Socket, LongPads +THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket LongPads +0 +22 +22 +Package_DIP +DIP-22_W8.89mm_SMDSocket_LongPads +22-lead though-hole mounted DIP package, row spacing 8.89 mm (350 mils), SMDSocket, LongPads +THT DIP DIL PDIP 2.54mm 8.89mm 350mil SMDSocket LongPads +0 +22 +22 +Package_DIP +DIP-22_W10.16mm +22-lead though-hole mounted DIP package, row spacing 10.16 mm (400 mils) +THT DIP DIL PDIP 2.54mm 10.16mm 400mil +0 +22 +22 +Package_DIP +DIP-22_W10.16mm_LongPads +22-lead though-hole mounted DIP package, row spacing 10.16 mm (400 mils), LongPads +THT DIP DIL PDIP 2.54mm 10.16mm 400mil LongPads +0 +22 +22 +Package_DIP +DIP-22_W10.16mm_SMDSocket_SmallPads +22-lead though-hole mounted DIP package, row spacing 10.16 mm (400 mils), SMDSocket, SmallPads +THT DIP DIL PDIP 2.54mm 10.16mm 400mil SMDSocket SmallPads +0 +22 +22 +Package_DIP +DIP-22_W10.16mm_Socket +22-lead though-hole mounted DIP package, row spacing 10.16 mm (400 mils), Socket +THT DIP DIL PDIP 2.54mm 10.16mm 400mil Socket +0 +22 +22 +Package_DIP +DIP-22_W10.16mm_Socket_LongPads +22-lead though-hole mounted DIP package, row spacing 10.16 mm (400 mils), Socket, LongPads +THT DIP DIL PDIP 2.54mm 10.16mm 400mil Socket LongPads +0 +22 +22 +Package_DIP +DIP-22_W11.43mm_SMDSocket_LongPads +22-lead though-hole mounted DIP package, row spacing 11.43 mm (450 mils), SMDSocket, LongPads +THT DIP DIL PDIP 2.54mm 11.43mm 450mil SMDSocket LongPads +0 +22 +22 +Package_DIP +DIP-24_W7.62mm +24-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils) +THT DIP DIL PDIP 2.54mm 7.62mm 300mil +0 +24 +24 +Package_DIP +DIP-24_W7.62mm_LongPads +24-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), LongPads +THT DIP DIL PDIP 2.54mm 7.62mm 300mil LongPads +0 +24 +24 +Package_DIP +DIP-24_W7.62mm_SMDSocket_SmallPads +24-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), SMDSocket, SmallPads +THT DIP DIL PDIP 2.54mm 7.62mm 300mil SMDSocket SmallPads +0 +24 +24 +Package_DIP +DIP-24_W7.62mm_Socket +24-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), Socket +THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket +0 +24 +24 +Package_DIP +DIP-24_W7.62mm_Socket_LongPads +24-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), Socket, LongPads +THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket LongPads +0 +24 +24 +Package_DIP +DIP-24_W8.89mm_SMDSocket_LongPads +24-lead though-hole mounted DIP package, row spacing 8.89 mm (350 mils), SMDSocket, LongPads +THT DIP DIL PDIP 2.54mm 8.89mm 350mil SMDSocket LongPads +0 +24 +24 +Package_DIP +DIP-24_W10.16mm +24-lead though-hole mounted DIP package, row spacing 10.16 mm (400 mils) +THT DIP DIL PDIP 2.54mm 10.16mm 400mil +0 +24 +24 +Package_DIP +DIP-24_W10.16mm_LongPads +24-lead though-hole mounted DIP package, row spacing 10.16 mm (400 mils), LongPads +THT DIP DIL PDIP 2.54mm 10.16mm 400mil LongPads +0 +24 +24 +Package_DIP +DIP-24_W10.16mm_SMDSocket_SmallPads +24-lead though-hole mounted DIP package, row spacing 10.16 mm (400 mils), SMDSocket, SmallPads +THT DIP DIL PDIP 2.54mm 10.16mm 400mil SMDSocket SmallPads +0 +24 +24 +Package_DIP +DIP-24_W10.16mm_Socket +24-lead though-hole mounted DIP package, row spacing 10.16 mm (400 mils), Socket +THT DIP DIL PDIP 2.54mm 10.16mm 400mil Socket +0 +24 +24 +Package_DIP +DIP-24_W10.16mm_Socket_LongPads +24-lead though-hole mounted DIP package, row spacing 10.16 mm (400 mils), Socket, LongPads +THT DIP DIL PDIP 2.54mm 10.16mm 400mil Socket LongPads +0 +24 +24 +Package_DIP +DIP-24_W11.43mm_SMDSocket_LongPads +24-lead though-hole mounted DIP package, row spacing 11.43 mm (450 mils), SMDSocket, LongPads +THT DIP DIL PDIP 2.54mm 11.43mm 450mil SMDSocket LongPads +0 +24 +24 +Package_DIP +DIP-24_W15.24mm +24-lead though-hole mounted DIP package, row spacing 15.24 mm (600 mils) +THT DIP DIL PDIP 2.54mm 15.24mm 600mil +0 +24 +24 +Package_DIP +DIP-24_W15.24mm_LongPads +24-lead though-hole mounted DIP package, row spacing 15.24 mm (600 mils), LongPads +THT DIP DIL PDIP 2.54mm 15.24mm 600mil LongPads +0 +24 +24 +Package_DIP +DIP-24_W15.24mm_SMDSocket_SmallPads +24-lead though-hole mounted DIP package, row spacing 15.24 mm (600 mils), SMDSocket, SmallPads +THT DIP DIL PDIP 2.54mm 15.24mm 600mil SMDSocket SmallPads +0 +24 +24 +Package_DIP +DIP-24_W15.24mm_Socket +24-lead though-hole mounted DIP package, row spacing 15.24 mm (600 mils), Socket +THT DIP DIL PDIP 2.54mm 15.24mm 600mil Socket +0 +24 +24 +Package_DIP +DIP-24_W15.24mm_Socket_LongPads +24-lead though-hole mounted DIP package, row spacing 15.24 mm (600 mils), Socket, LongPads +THT DIP DIL PDIP 2.54mm 15.24mm 600mil Socket LongPads +0 +24 +24 +Package_DIP +DIP-24_W16.51mm_SMDSocket_LongPads +24-lead though-hole mounted DIP package, row spacing 16.51 mm (650 mils), SMDSocket, LongPads +THT DIP DIL PDIP 2.54mm 16.51mm 650mil SMDSocket LongPads +0 +24 +24 +Package_DIP +DIP-28_W7.62mm +28-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils) +THT DIP DIL PDIP 2.54mm 7.62mm 300mil +0 +28 +28 +Package_DIP +DIP-28_W7.62mm_LongPads +28-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), LongPads +THT DIP DIL PDIP 2.54mm 7.62mm 300mil LongPads +0 +28 +28 +Package_DIP +DIP-28_W7.62mm_SMDSocket_SmallPads +28-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), SMDSocket, SmallPads +THT DIP DIL PDIP 2.54mm 7.62mm 300mil SMDSocket SmallPads +0 +28 +28 +Package_DIP +DIP-28_W7.62mm_Socket +28-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), Socket +THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket +0 +28 +28 +Package_DIP +DIP-28_W7.62mm_Socket_LongPads +28-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), Socket, LongPads +THT DIP DIL PDIP 2.54mm 7.62mm 300mil Socket LongPads +0 +28 +28 +Package_DIP +DIP-28_W8.89mm_SMDSocket_LongPads +28-lead though-hole mounted DIP package, row spacing 8.89 mm (350 mils), SMDSocket, LongPads +THT DIP DIL PDIP 2.54mm 8.89mm 350mil SMDSocket LongPads +0 +28 +28 +Package_DIP +DIP-28_W15.24mm +28-lead though-hole mounted DIP package, row spacing 15.24 mm (600 mils) +THT DIP DIL PDIP 2.54mm 15.24mm 600mil +0 +28 +28 +Package_DIP +DIP-28_W15.24mm_LongPads +28-lead though-hole mounted DIP package, row spacing 15.24 mm (600 mils), LongPads +THT DIP DIL PDIP 2.54mm 15.24mm 600mil LongPads +0 +28 +28 +Package_DIP +DIP-28_W15.24mm_SMDSocket_SmallPads +28-lead though-hole mounted DIP package, row spacing 15.24 mm (600 mils), SMDSocket, SmallPads +THT DIP DIL PDIP 2.54mm 15.24mm 600mil SMDSocket SmallPads +0 +28 +28 +Package_DIP +DIP-28_W15.24mm_Socket +28-lead though-hole mounted DIP package, row spacing 15.24 mm (600 mils), Socket +THT DIP DIL PDIP 2.54mm 15.24mm 600mil Socket +0 +28 +28 +Package_DIP +DIP-28_W15.24mm_Socket_LongPads +28-lead though-hole mounted DIP package, row spacing 15.24 mm (600 mils), Socket, LongPads +THT DIP DIL PDIP 2.54mm 15.24mm 600mil Socket LongPads +0 +28 +28 +Package_DIP +DIP-28_W16.51mm_SMDSocket_LongPads +28-lead though-hole mounted DIP package, row spacing 16.51 mm (650 mils), SMDSocket, LongPads +THT DIP DIL PDIP 2.54mm 16.51mm 650mil SMDSocket LongPads +0 +28 +28 +Package_DIP +DIP-32_W7.62mm +32-lead dip package, row spacing 7.62 mm (300 mils) +DIL DIP PDIP 2.54mm 7.62mm 300mil +0 +32 +32 +Package_DIP +DIP-32_W15.24mm +32-lead though-hole mounted DIP package, row spacing 15.24 mm (600 mils) +THT DIP DIL PDIP 2.54mm 15.24mm 600mil +0 +32 +32 +Package_DIP +DIP-32_W15.24mm_LongPads +32-lead though-hole mounted DIP package, row spacing 15.24 mm (600 mils), LongPads +THT DIP DIL PDIP 2.54mm 15.24mm 600mil LongPads +0 +32 +32 +Package_DIP +DIP-32_W15.24mm_SMDSocket_SmallPads +32-lead though-hole mounted DIP package, row spacing 15.24 mm (600 mils), SMDSocket, SmallPads +THT DIP DIL PDIP 2.54mm 15.24mm 600mil SMDSocket SmallPads +0 +32 +32 +Package_DIP +DIP-32_W15.24mm_Socket +32-lead though-hole mounted DIP package, row spacing 15.24 mm (600 mils), Socket +THT DIP DIL PDIP 2.54mm 15.24mm 600mil Socket +0 +32 +32 +Package_DIP +DIP-32_W15.24mm_Socket_LongPads +32-lead though-hole mounted DIP package, row spacing 15.24 mm (600 mils), Socket, LongPads +THT DIP DIL PDIP 2.54mm 15.24mm 600mil Socket LongPads +0 +32 +32 +Package_DIP +DIP-32_W16.51mm_SMDSocket_LongPads +32-lead though-hole mounted DIP package, row spacing 16.51 mm (650 mils), SMDSocket, LongPads +THT DIP DIL PDIP 2.54mm 16.51mm 650mil SMDSocket LongPads +0 +32 +32 +Package_DIP +DIP-40_W15.24mm +40-lead though-hole mounted DIP package, row spacing 15.24 mm (600 mils) +THT DIP DIL PDIP 2.54mm 15.24mm 600mil +0 +40 +40 +Package_DIP +DIP-40_W15.24mm_LongPads +40-lead though-hole mounted DIP package, row spacing 15.24 mm (600 mils), LongPads +THT DIP DIL PDIP 2.54mm 15.24mm 600mil LongPads +0 +40 +40 +Package_DIP +DIP-40_W15.24mm_SMDSocket_SmallPads +40-lead though-hole mounted DIP package, row spacing 15.24 mm (600 mils), SMDSocket, SmallPads +THT DIP DIL PDIP 2.54mm 15.24mm 600mil SMDSocket SmallPads +0 +40 +40 +Package_DIP +DIP-40_W15.24mm_Socket +40-lead though-hole mounted DIP package, row spacing 15.24 mm (600 mils), Socket +THT DIP DIL PDIP 2.54mm 15.24mm 600mil Socket +0 +40 +40 +Package_DIP +DIP-40_W15.24mm_Socket_LongPads +40-lead though-hole mounted DIP package, row spacing 15.24 mm (600 mils), Socket, LongPads +THT DIP DIL PDIP 2.54mm 15.24mm 600mil Socket LongPads +0 +40 +40 +Package_DIP +DIP-40_W16.51mm_SMDSocket_LongPads +40-lead though-hole mounted DIP package, row spacing 16.51 mm (650 mils), SMDSocket, LongPads +THT DIP DIL PDIP 2.54mm 16.51mm 650mil SMDSocket LongPads +0 +40 +40 +Package_DIP +DIP-40_W25.4mm +40-lead though-hole mounted DIP package, row spacing 25.4 mm (1000 mils) +THT DIP DIL PDIP 2.54mm 25.4mm 1000mil +0 +40 +40 +Package_DIP +DIP-40_W25.4mm_LongPads +40-lead though-hole mounted DIP package, row spacing 25.4 mm (1000 mils), LongPads +THT DIP DIL PDIP 2.54mm 25.4mm 1000mil LongPads +0 +40 +40 +Package_DIP +DIP-40_W25.4mm_SMDSocket_SmallPads +40-lead though-hole mounted DIP package, row spacing 25.4 mm (1000 mils), SMDSocket, SmallPads +THT DIP DIL PDIP 2.54mm 25.4mm 1000mil SMDSocket SmallPads +0 +40 +40 +Package_DIP +DIP-40_W25.4mm_Socket +40-lead though-hole mounted DIP package, row spacing 25.4 mm (1000 mils), Socket +THT DIP DIL PDIP 2.54mm 25.4mm 1000mil Socket +0 +40 +40 +Package_DIP +DIP-40_W25.4mm_Socket_LongPads +40-lead though-hole mounted DIP package, row spacing 25.4 mm (1000 mils), Socket, LongPads +THT DIP DIL PDIP 2.54mm 25.4mm 1000mil Socket LongPads +0 +40 +40 +Package_DIP +DIP-40_W26.67mm_SMDSocket_LongPads +40-lead though-hole mounted DIP package, row spacing 26.67 mm (1050 mils), SMDSocket, LongPads +THT DIP DIL PDIP 2.54mm 26.669999999999998mm 1050mil SMDSocket LongPads +0 +40 +40 +Package_DIP +DIP-42_W15.24mm +42-lead though-hole mounted DIP package, row spacing 15.24 mm (600 mils) +THT DIP DIL PDIP 2.54mm 15.24mm 600mil +0 +42 +42 +Package_DIP +DIP-42_W15.24mm_LongPads +42-lead though-hole mounted DIP package, row spacing 15.24 mm (600 mils), LongPads +THT DIP DIL PDIP 2.54mm 15.24mm 600mil LongPads +0 +42 +42 +Package_DIP +DIP-42_W15.24mm_SMDSocket_SmallPads +42-lead though-hole mounted DIP package, row spacing 15.24 mm (600 mils), SMDSocket, SmallPads +THT DIP DIL PDIP 2.54mm 15.24mm 600mil SMDSocket SmallPads +0 +42 +42 +Package_DIP +DIP-42_W15.24mm_Socket +42-lead though-hole mounted DIP package, row spacing 15.24 mm (600 mils), Socket +THT DIP DIL PDIP 2.54mm 15.24mm 600mil Socket +0 +42 +42 +Package_DIP +DIP-42_W15.24mm_Socket_LongPads +42-lead though-hole mounted DIP package, row spacing 15.24 mm (600 mils), Socket, LongPads +THT DIP DIL PDIP 2.54mm 15.24mm 600mil Socket LongPads +0 +42 +42 +Package_DIP +DIP-42_W16.51mm_SMDSocket_LongPads +42-lead though-hole mounted DIP package, row spacing 16.51 mm (650 mils), SMDSocket, LongPads +THT DIP DIL PDIP 2.54mm 16.51mm 650mil SMDSocket LongPads +0 +42 +42 +Package_DIP +DIP-48_W15.24mm +48-lead though-hole mounted DIP package, row spacing 15.24 mm (600 mils) +THT DIP DIL PDIP 2.54mm 15.24mm 600mil +0 +48 +48 +Package_DIP +DIP-48_W15.24mm_LongPads +48-lead though-hole mounted DIP package, row spacing 15.24 mm (600 mils), LongPads +THT DIP DIL PDIP 2.54mm 15.24mm 600mil LongPads +0 +48 +48 +Package_DIP +DIP-48_W15.24mm_SMDSocket_SmallPads +48-lead though-hole mounted DIP package, row spacing 15.24 mm (600 mils), SMDSocket, SmallPads +THT DIP DIL PDIP 2.54mm 15.24mm 600mil SMDSocket SmallPads +0 +48 +48 +Package_DIP +DIP-48_W15.24mm_Socket +48-lead though-hole mounted DIP package, row spacing 15.24 mm (600 mils), Socket +THT DIP DIL PDIP 2.54mm 15.24mm 600mil Socket +0 +48 +48 +Package_DIP +DIP-48_W15.24mm_Socket_LongPads +48-lead though-hole mounted DIP package, row spacing 15.24 mm (600 mils), Socket, LongPads +THT DIP DIL PDIP 2.54mm 15.24mm 600mil Socket LongPads +0 +48 +48 +Package_DIP +DIP-48_W16.51mm_SMDSocket_LongPads +48-lead though-hole mounted DIP package, row spacing 16.51 mm (650 mils), SMDSocket, LongPads +THT DIP DIL PDIP 2.54mm 16.51mm 650mil SMDSocket LongPads +0 +48 +48 +Package_DIP +DIP-64_W15.24mm +64-lead though-hole mounted DIP package, row spacing 15.24 mm (600 mils) +THT DIP DIL PDIP 2.54mm 15.24mm 600mil +0 +64 +64 +Package_DIP +DIP-64_W15.24mm_LongPads +64-lead though-hole mounted DIP package, row spacing 15.24 mm (600 mils), LongPads +THT DIP DIL PDIP 2.54mm 15.24mm 600mil LongPads +0 +64 +64 +Package_DIP +DIP-64_W15.24mm_SMDSocket_SmallPads +64-lead though-hole mounted DIP package, row spacing 15.24 mm (600 mils), SMDSocket, SmallPads +THT DIP DIL PDIP 2.54mm 15.24mm 600mil SMDSocket SmallPads +0 +64 +64 +Package_DIP +DIP-64_W15.24mm_Socket +64-lead though-hole mounted DIP package, row spacing 15.24 mm (600 mils), Socket +THT DIP DIL PDIP 2.54mm 15.24mm 600mil Socket +0 +64 +64 +Package_DIP +DIP-64_W15.24mm_Socket_LongPads +64-lead though-hole mounted DIP package, row spacing 15.24 mm (600 mils), Socket, LongPads +THT DIP DIL PDIP 2.54mm 15.24mm 600mil Socket LongPads +0 +64 +64 +Package_DIP +DIP-64_W16.51mm_SMDSocket_LongPads +64-lead though-hole mounted DIP package, row spacing 16.51 mm (650 mils), SMDSocket, LongPads +THT DIP DIL PDIP 2.54mm 16.51mm 650mil SMDSocket LongPads +0 +64 +64 +Package_DIP +DIP-64_W22.86mm +64-lead though-hole mounted DIP package, row spacing 22.86 mm (900 mils) +THT DIP DIL PDIP 2.54mm 22.86mm 900mil +0 +64 +64 +Package_DIP +DIP-64_W22.86mm_LongPads +64-lead though-hole mounted DIP package, row spacing 22.86 mm (900 mils), LongPads +THT DIP DIL PDIP 2.54mm 22.86mm 900mil LongPads +0 +64 +64 +Package_DIP +DIP-64_W22.86mm_SMDSocket_SmallPads +64-lead though-hole mounted DIP package, row spacing 22.86 mm (900 mils), SMDSocket, SmallPads +THT DIP DIL PDIP 2.54mm 22.86mm 900mil SMDSocket SmallPads +0 +64 +64 +Package_DIP +DIP-64_W22.86mm_Socket +64-lead though-hole mounted DIP package, row spacing 22.86 mm (900 mils), Socket +THT DIP DIL PDIP 2.54mm 22.86mm 900mil Socket +0 +64 +64 +Package_DIP +DIP-64_W22.86mm_Socket_LongPads +64-lead though-hole mounted DIP package, row spacing 22.86 mm (900 mils), Socket, LongPads +THT DIP DIL PDIP 2.54mm 22.86mm 900mil Socket LongPads +0 +64 +64 +Package_DIP +DIP-64_W24.13mm_SMDSocket_LongPads +64-lead though-hole mounted DIP package, row spacing 24.13 mm (950 mils), SMDSocket, LongPads +THT DIP DIL PDIP 2.54mm 24.13mm 950mil SMDSocket LongPads +0 +64 +64 +Package_DIP +DIP-64_W25.4mm +64-lead though-hole mounted DIP package, row spacing 25.4 mm (1000 mils) +THT DIP DIL PDIP 2.54mm 25.4mm 1000mil +0 +64 +64 +Package_DIP +DIP-64_W25.4mm_LongPads +64-lead though-hole mounted DIP package, row spacing 25.4 mm (1000 mils), LongPads +THT DIP DIL PDIP 2.54mm 25.4mm 1000mil LongPads +0 +64 +64 +Package_DIP +DIP-64_W25.4mm_SMDSocket_SmallPads +64-lead though-hole mounted DIP package, row spacing 25.4 mm (1000 mils), SMDSocket, SmallPads +THT DIP DIL PDIP 2.54mm 25.4mm 1000mil SMDSocket SmallPads +0 +64 +64 +Package_DIP +DIP-64_W25.4mm_Socket +64-lead though-hole mounted DIP package, row spacing 25.4 mm (1000 mils), Socket +THT DIP DIL PDIP 2.54mm 25.4mm 1000mil Socket +0 +64 +64 +Package_DIP +DIP-64_W25.4mm_Socket_LongPads +64-lead though-hole mounted DIP package, row spacing 25.4 mm (1000 mils), Socket, LongPads +THT DIP DIL PDIP 2.54mm 25.4mm 1000mil Socket LongPads +0 +64 +64 +Package_DIP +DIP-64_W26.67mm_SMDSocket_LongPads +64-lead though-hole mounted DIP package, row spacing 26.67 mm (1050 mils), SMDSocket, LongPads +THT DIP DIL PDIP 2.54mm 26.669999999999998mm 1050mil SMDSocket LongPads +0 +64 +64 +Package_DIP +Fairchild_LSOP-8 +8-Lead, 300\" Wide, Surface Mount Package (https://www.fairchildsemi.com/package-drawings/ML/MLSOP08A.pdf) +LSOP 2.54mm 300mil +0 +8 +8 +Package_DIP +PowerIntegrations_PDIP-8B +Power Integrations variant of 8-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), LongPads, see https://www.power.com/sites/default/files/product-docs/lnk520.pdf +THT DIP DIL PDIP 2.54mm 7.62mm 300mil LongPads +0 +7 +7 +Package_DIP +PowerIntegrations_PDIP-8C +Power Integrations variant of 8-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), LongPads, see https://ac-dc.power.com/sites/default/files/product-docs/tinyswitch-iii_family_datasheet.pdf +THT DIP DIL PDIP 2.54mm 7.62mm 300mil LongPads +0 +7 +7 +Package_DIP +PowerIntegrations_SDIP-10C +PowerIntegrations variant of 10-lead though-hole mounted DIP package, row spacing 7.62 mm (300 mils), LongPads, see https://www.power.com/sites/default/files/product-docs/tophx_family_datasheet.pdf +THT DIP DIL PDIP 2.54mm 7.62mm 300mil LongPads +0 +9 +9 +Package_DIP +PowerIntegrations_SMD-8 +PowerIntegrations variant of 8-lead surface-mounted (SMD) DIP package, row spacing 7.62 mm (300 mils), see https://www.power.com/sites/default/files/product-docs/lnk520.pdf +SMD DIP DIL PDIP SMDIP 2.54mm 7.62mm 300mil +0 +8 +8 +Package_DIP +PowerIntegrations_SMD-8B +PowerIntegrations variant of 8-lead surface-mounted (SMD) DIP package, row spacing 7.62 mm (300 mils), see https://www.power.com/sites/default/files/product-docs/lnk520.pdf +SMD DIP DIL PDIP SMDIP 2.54mm 7.62mm 300mil +0 +7 +7 +Package_DIP +PowerIntegrations_SMD-8C +PowerIntegrations variant of 8-lead surface-mounted (SMD) DIP package, row spacing 7.62 mm (300 mils), see https://ac-dc.power.com/sites/default/files/product-docs/tinyswitch-iii_family_datasheet.pdf +SMD DIP DIL PDIP SMDIP 2.54mm 7.62mm 300mil +0 +7 +7 +Package_DIP +PowerIntegrations_eDIP-12B +Power Integrations eDIP-12B, see https://www.power.com/sites/default/files/product-docs/linkswitch-pl_family_datasheet.pdf +THT DIP DIL PDIP 2.54mm 7.62mm 300mil +0 +11 +11 +Package_DIP +SMDIP-4_W7.62mm +4-lead surface-mounted (SMD) DIP package, row spacing 7.62 mm (300 mils) +SMD DIP DIL PDIP SMDIP 2.54mm 7.62mm 300mil +0 +4 +4 +Package_DIP +SMDIP-4_W9.53mm +4-lead surface-mounted (SMD) DIP package, row spacing 9.53 mm (375 mils) +SMD DIP DIL PDIP SMDIP 2.54mm 9.53mm 375mil +0 +4 +4 +Package_DIP +SMDIP-4_W9.53mm_Clearance8mm +4-lead surface-mounted (SMD) DIP package, row spacing 9.53 mm (375 mils), Clearance8mm +SMD DIP DIL PDIP SMDIP 2.54mm 9.53mm 375mil Clearance8mm +0 +4 +4 +Package_DIP +SMDIP-4_W11.48mm +4-lead surface-mounted (SMD) DIP package, row spacing 11.48 mm (451 mils) +SMD DIP DIL PDIP SMDIP 2.54mm 11.48mm 451mil +0 +4 +4 +Package_DIP +SMDIP-6_W7.62mm +6-lead surface-mounted (SMD) DIP package, row spacing 7.62 mm (300 mils) +SMD DIP DIL PDIP SMDIP 2.54mm 7.62mm 300mil +0 +6 +6 +Package_DIP +SMDIP-6_W9.53mm +6-lead surface-mounted (SMD) DIP package, row spacing 9.53 mm (375 mils) +SMD DIP DIL PDIP SMDIP 2.54mm 9.53mm 375mil +0 +6 +6 +Package_DIP +SMDIP-6_W9.53mm_Clearance8mm +6-lead surface-mounted (SMD) DIP package, row spacing 9.53 mm (375 mils), Clearance8mm +SMD DIP DIL PDIP SMDIP 2.54mm 9.53mm 375mil Clearance8mm +0 +6 +6 +Package_DIP +SMDIP-6_W11.48mm +6-lead surface-mounted (SMD) DIP package, row spacing 11.48 mm (451 mils) +SMD DIP DIL PDIP SMDIP 2.54mm 11.48mm 451mil +0 +6 +6 +Package_DIP +SMDIP-8_W7.62mm +8-lead surface-mounted (SMD) DIP package, row spacing 7.62 mm (300 mils) +SMD DIP DIL PDIP SMDIP 2.54mm 7.62mm 300mil +0 +8 +8 +Package_DIP +SMDIP-8_W9.53mm +8-lead surface-mounted (SMD) DIP package, row spacing 9.53 mm (375 mils) +SMD DIP DIL PDIP SMDIP 2.54mm 9.53mm 375mil +0 +8 +8 +Package_DIP +SMDIP-8_W9.53mm_Clearance8mm +8-lead surface-mounted (SMD) DIP package, row spacing 9.53 mm (375 mils), Clearance8mm +SMD DIP DIL PDIP SMDIP 2.54mm 9.53mm 375mil Clearance8mm +0 +8 +8 +Package_DIP +SMDIP-8_W11.48mm +8-lead surface-mounted (SMD) DIP package, row spacing 11.48 mm (451 mils) +SMD DIP DIL PDIP SMDIP 2.54mm 11.48mm 451mil +0 +8 +8 +Package_DIP +SMDIP-10_W7.62mm +10-lead surface-mounted (SMD) DIP package, row spacing 7.62 mm (300 mils) +SMD DIP DIL PDIP SMDIP 2.54mm 7.62mm 300mil +0 +10 +10 +Package_DIP +SMDIP-10_W9.53mm +10-lead surface-mounted (SMD) DIP package, row spacing 9.53 mm (375 mils) +SMD DIP DIL PDIP SMDIP 2.54mm 9.53mm 375mil +0 +10 +10 +Package_DIP +SMDIP-10_W9.53mm_Clearance8mm +10-lead surface-mounted (SMD) DIP package, row spacing 9.53 mm (375 mils), Clearance8mm +SMD DIP DIL PDIP SMDIP 2.54mm 9.53mm 375mil Clearance8mm +0 +10 +10 +Package_DIP +SMDIP-10_W11.48mm +10-lead surface-mounted (SMD) DIP package, row spacing 11.48 mm (451 mils) +SMD DIP DIL PDIP SMDIP 2.54mm 11.48mm 451mil +0 +10 +10 +Package_DIP +SMDIP-12_W7.62mm +12-lead surface-mounted (SMD) DIP package, row spacing 7.62 mm (300 mils) +SMD DIP DIL PDIP SMDIP 2.54mm 7.62mm 300mil +0 +12 +12 +Package_DIP +SMDIP-12_W9.53mm +12-lead surface-mounted (SMD) DIP package, row spacing 9.53 mm (375 mils) +SMD DIP DIL PDIP SMDIP 2.54mm 9.53mm 375mil +0 +12 +12 +Package_DIP +SMDIP-12_W9.53mm_Clearance8mm +12-lead surface-mounted (SMD) DIP package, row spacing 9.53 mm (375 mils), Clearance8mm +SMD DIP DIL PDIP SMDIP 2.54mm 9.53mm 375mil Clearance8mm +0 +12 +12 +Package_DIP +SMDIP-12_W11.48mm +12-lead surface-mounted (SMD) DIP package, row spacing 11.48 mm (451 mils) +SMD DIP DIL PDIP SMDIP 2.54mm 11.48mm 451mil +0 +12 +12 +Package_DIP +SMDIP-14_W7.62mm +14-lead surface-mounted (SMD) DIP package, row spacing 7.62 mm (300 mils) +SMD DIP DIL PDIP SMDIP 2.54mm 7.62mm 300mil +0 +14 +14 +Package_DIP +SMDIP-14_W9.53mm +14-lead surface-mounted (SMD) DIP package, row spacing 9.53 mm (375 mils) +SMD DIP DIL PDIP SMDIP 2.54mm 9.53mm 375mil +0 +14 +14 +Package_DIP +SMDIP-14_W9.53mm_Clearance8mm +14-lead surface-mounted (SMD) DIP package, row spacing 9.53 mm (375 mils), Clearance8mm +SMD DIP DIL PDIP SMDIP 2.54mm 9.53mm 375mil Clearance8mm +0 +14 +14 +Package_DIP +SMDIP-14_W11.48mm +14-lead surface-mounted (SMD) DIP package, row spacing 11.48 mm (451 mils) +SMD DIP DIL PDIP SMDIP 2.54mm 11.48mm 451mil +0 +14 +14 +Package_DIP +SMDIP-16_W7.62mm +16-lead surface-mounted (SMD) DIP package, row spacing 7.62 mm (300 mils) +SMD DIP DIL PDIP SMDIP 2.54mm 7.62mm 300mil +0 +16 +16 +Package_DIP +SMDIP-16_W9.53mm +16-lead surface-mounted (SMD) DIP package, row spacing 9.53 mm (375 mils) +SMD DIP DIL PDIP SMDIP 2.54mm 9.53mm 375mil +0 +16 +16 +Package_DIP +SMDIP-16_W9.53mm_Clearance8mm +16-lead surface-mounted (SMD) DIP package, row spacing 9.53 mm (375 mils), Clearance8mm +SMD DIP DIL PDIP SMDIP 2.54mm 9.53mm 375mil Clearance8mm +0 +16 +16 +Package_DIP +SMDIP-16_W11.48mm +16-lead surface-mounted (SMD) DIP package, row spacing 11.48 mm (451 mils) +SMD DIP DIL PDIP SMDIP 2.54mm 11.48mm 451mil +0 +16 +16 +Package_DIP +SMDIP-18_W7.62mm +18-lead surface-mounted (SMD) DIP package, row spacing 7.62 mm (300 mils) +SMD DIP DIL PDIP SMDIP 2.54mm 7.62mm 300mil +0 +18 +18 +Package_DIP +SMDIP-18_W9.53mm +18-lead surface-mounted (SMD) DIP package, row spacing 9.53 mm (375 mils) +SMD DIP DIL PDIP SMDIP 2.54mm 9.53mm 375mil +0 +18 +18 +Package_DIP +SMDIP-18_W9.53mm_Clearance8mm +18-lead surface-mounted (SMD) DIP package, row spacing 9.53 mm (375 mils), Clearance8mm +SMD DIP DIL PDIP SMDIP 2.54mm 9.53mm 375mil Clearance8mm +0 +18 +18 +Package_DIP +SMDIP-18_W11.48mm +18-lead surface-mounted (SMD) DIP package, row spacing 11.48 mm (451 mils) +SMD DIP DIL PDIP SMDIP 2.54mm 11.48mm 451mil +0 +18 +18 +Package_DIP +SMDIP-20_W7.62mm +20-lead surface-mounted (SMD) DIP package, row spacing 7.62 mm (300 mils) +SMD DIP DIL PDIP SMDIP 2.54mm 7.62mm 300mil +0 +20 +20 +Package_DIP +SMDIP-20_W9.53mm +20-lead surface-mounted (SMD) DIP package, row spacing 9.53 mm (375 mils) +SMD DIP DIL PDIP SMDIP 2.54mm 9.53mm 375mil +0 +20 +20 +Package_DIP +SMDIP-20_W9.53mm_Clearance8mm +20-lead surface-mounted (SMD) DIP package, row spacing 9.53 mm (375 mils), Clearance8mm +SMD DIP DIL PDIP SMDIP 2.54mm 9.53mm 375mil Clearance8mm +0 +20 +20 +Package_DIP +SMDIP-20_W11.48mm +20-lead surface-mounted (SMD) DIP package, row spacing 11.48 mm (451 mils) +SMD DIP DIL PDIP SMDIP 2.54mm 11.48mm 451mil +0 +20 +20 +Package_DIP +SMDIP-22_W7.62mm +22-lead surface-mounted (SMD) DIP package, row spacing 7.62 mm (300 mils) +SMD DIP DIL PDIP SMDIP 2.54mm 7.62mm 300mil +0 +22 +22 +Package_DIP +SMDIP-22_W9.53mm +22-lead surface-mounted (SMD) DIP package, row spacing 9.53 mm (375 mils) +SMD DIP DIL PDIP SMDIP 2.54mm 9.53mm 375mil +0 +22 +22 +Package_DIP +SMDIP-22_W9.53mm_Clearance8mm +22-lead surface-mounted (SMD) DIP package, row spacing 9.53 mm (375 mils), Clearance8mm +SMD DIP DIL PDIP SMDIP 2.54mm 9.53mm 375mil Clearance8mm +0 +22 +22 +Package_DIP +SMDIP-22_W11.48mm +22-lead surface-mounted (SMD) DIP package, row spacing 11.48 mm (451 mils) +SMD DIP DIL PDIP SMDIP 2.54mm 11.48mm 451mil +0 +22 +22 +Package_DIP +SMDIP-24_W7.62mm +24-lead surface-mounted (SMD) DIP package, row spacing 7.62 mm (300 mils) +SMD DIP DIL PDIP SMDIP 2.54mm 7.62mm 300mil +0 +24 +24 +Package_DIP +SMDIP-24_W9.53mm +24-lead surface-mounted (SMD) DIP package, row spacing 9.53 mm (375 mils) +SMD DIP DIL PDIP SMDIP 2.54mm 9.53mm 375mil +0 +24 +24 +Package_DIP +SMDIP-24_W11.48mm +24-lead surface-mounted (SMD) DIP package, row spacing 11.48 mm (451 mils) +SMD DIP DIL PDIP SMDIP 2.54mm 11.48mm 451mil +0 +24 +24 +Package_DIP +SMDIP-24_W15.24mm +24-lead surface-mounted (SMD) DIP package, row spacing 15.24 mm (600 mils) +SMD DIP DIL PDIP SMDIP 2.54mm 15.24mm 600mil +0 +24 +24 +Package_DIP +SMDIP-28_W15.24mm +28-lead surface-mounted (SMD) DIP package, row spacing 15.24 mm (600 mils) +SMD DIP DIL PDIP SMDIP 2.54mm 15.24mm 600mil +0 +28 +28 +Package_DIP +SMDIP-32_W7.62mm +32-lead surface-mounted (SMD) DIP package, row spacing 7.62 mm (300 mils) +SMD DIP DIL PDIP SMDIP 2.54mm 7.62mm 300mil +0 +32 +32 +Package_DIP +SMDIP-32_W9.53mm +32-lead surface-mounted (SMD) DIP package, row spacing 9.53 mm (375 mils) +SMD DIP DIL PDIP SMDIP 2.54mm 9.53mm 375mil +0 +32 +32 +Package_DIP +SMDIP-32_W11.48mm +32-lead surface-mounted (SMD) DIP package, row spacing 11.48 mm (451 mils) +SMD DIP DIL PDIP SMDIP 2.54mm 11.48mm 451mil +0 +32 +32 +Package_DIP +SMDIP-32_W15.24mm +32-lead surface-mounted (SMD) DIP package, row spacing 15.24 mm (600 mils) +SMD DIP DIL PDIP SMDIP 2.54mm 15.24mm 600mil +0 +32 +32 +Package_DIP +SMDIP-40_W15.24mm +40-lead surface-mounted (SMD) DIP package, row spacing 15.24 mm (600 mils) +SMD DIP DIL PDIP SMDIP 2.54mm 15.24mm 600mil +0 +40 +40 +Package_DIP +SMDIP-40_W25.24mm +40-lead surface-mounted (SMD) DIP package, row spacing 25.24 mm (993 mils) +SMD DIP DIL PDIP SMDIP 2.54mm 25.24mm 993mil +0 +40 +40 +Package_DIP +SMDIP-42_W15.24mm +42-lead surface-mounted (SMD) DIP package, row spacing 15.24 mm (600 mils) +SMD DIP DIL PDIP SMDIP 2.54mm 15.24mm 600mil +0 +42 +42 +Package_DIP +SMDIP-48_W15.24mm +48-lead surface-mounted (SMD) DIP package, row spacing 15.24 mm (600 mils) +SMD DIP DIL PDIP SMDIP 2.54mm 15.24mm 600mil +0 +48 +48 +Package_DIP +SMDIP-64_W15.24mm +64-lead surface-mounted (SMD) DIP package, row spacing 15.24 mm (600 mils) +SMD DIP DIL PDIP SMDIP 2.54mm 15.24mm 600mil +0 +64 +64 +Package_DIP +Toshiba_11-7A9 +Toshiba 11-7A9 package, like 6-lead dip package with missing pin 5, row spacing 7.62 mm (300 mils), https://toshiba.semicon-storage.com/info/docget.jsp?did=1421&prodName=TLP3021(S) +Toshiba 11-7A9 DIL DIP PDIP 2.54mm 7.62mm 300mil +0 +5 +5 +Package_DIP +Vishay_HVM-DIP-3_W7.62mm +3-lead though-hole mounted high-volatge DIP package (based on standard DIP-4), row spacing 7.62 mm (300 mils), see https://www.vishay.com/docs/91361/hexdip.pdf +THT DIP DIL PDIP 2.54mm 7.62mm 300mil Vishay HVMDIP HEXDIP +0 +4 +3 +Package_DirectFET +DirectFET_L4 +DirectFET L4 https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=41 +DirectFET L4 MOSFET Infineon +0 +11 +3 +Package_DirectFET +DirectFET_L6 +DirectFET L6 https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=42 +DirectFET L6 MOSFET Infineon +0 +13 +3 +Package_DirectFET +DirectFET_L8 +DirectFET L8 https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=43 +DirectFET L8 MOSFET Infineon +0 +15 +3 +Package_DirectFET +DirectFET_LA +DirectFET LA https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=44 +DirectFET LA MOSFET Infineon +0 +15 +3 +Package_DirectFET +DirectFET_M2 +DirectFET M2 https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=33 +DirectFET M2 MOSFET Infineon +0 +7 +3 +Package_DirectFET +DirectFET_M4 +DirectFET M4 https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=34 +DirectFET M4 MOSFET Infineon +0 +9 +3 +Package_DirectFET +DirectFET_MA +DirectFET MA https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=35 +DirectFET MA MOSFET Infineon +0 +8 +3 +Package_DirectFET +DirectFET_MB +DirectFET MB https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=36 +DirectFET MB MOSFET Infineon +0 +8 +3 +Package_DirectFET +DirectFET_MC +DirectFET MC https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=37 +DirectFET MC MOSFET Infineon +0 +10 +3 +Package_DirectFET +DirectFET_MD +DirectFET MD https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=38 +DirectFET MD MOSFET Infineon +0 +8 +3 +Package_DirectFET +DirectFET_ME +DirectFET ME https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=39 +DirectFET ME MOSFET Infineon +0 +10 +3 +Package_DirectFET +DirectFET_MF +DirectFET MF https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=40 +DirectFET MF MOSFET Infineon +0 +8 +3 +Package_DirectFET +DirectFET_MN +DirectFET MN https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=30 +DirectFET MN MOSFET Infineon +0 +7 +3 +Package_DirectFET +DirectFET_MP +DirectFET MP https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=28 +DirectFET MP MOSFET Infineon +0 +7 +3 +Package_DirectFET +DirectFET_MQ +DirectFET MQ https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=29 +DirectFET MQ MOSFET Infineon +0 +7 +3 +Package_DirectFET +DirectFET_MT +DirectFET MT https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=26 +DirectFET MT MOSFET Infineon +0 +7 +3 +Package_DirectFET +DirectFET_MU +DirectFET MU https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=32 +DirectFET MU MOSFET Infineon +0 +7 +3 +Package_DirectFET +DirectFET_MX +DirectFET MX https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=27 +DirectFET MX MOSFET Infineon +0 +7 +3 +Package_DirectFET +DirectFET_MZ +DirectFET MZ https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=31 +DirectFET MZ MOSFET Infineon +0 +7 +3 +Package_DirectFET +DirectFET_S1 +DirectFET S1 https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=20 +DirectFET S1 MOSFET Infineon +0 +6 +3 +Package_DirectFET +DirectFET_S2 +DirectFET S2 https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=21 +DirectFET S2 MOSFET Infineon +0 +7 +3 +Package_DirectFET +DirectFET_S3C +DirectFET S3C https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=25 +DirectFET S3C MOSFET Infineon +0 +8 +3 +Package_DirectFET +DirectFET_SA +DirectFET SA https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=22 +DirectFET SA MOSFET Infineon +0 +8 +3 +Package_DirectFET +DirectFET_SB +DirectFET SB https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=23 +DirectFET SB MOSFET Infineon +0 +6 +3 +Package_DirectFET +DirectFET_SC +DirectFET SC https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=24 +DirectFET SC MOSFET Infineon +0 +7 +3 +Package_DirectFET +DirectFET_SH +DirectFET SH https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=19 +DirectFET SH MOSFET Infineon +0 +6 +3 +Package_DirectFET +DirectFET_SJ +DirectFET SJ https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=18 +DirectFET SJ MOSFET Infineon +0 +7 +3 +Package_DirectFET +DirectFET_SQ +DirectFET SQ https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=17 +DirectFET SQ MOSFET Infineon +0 +6 +3 +Package_DirectFET +DirectFET_ST +DirectFET ST https://www.infineon.com/dgdl/Infineon-AN-1035-ApplicationNotes-v29_01-EN.pdf?fileId=5546d462533600a40153559159020f76#page=16 +DirectFET ST MOSFET Infineon +0 +7 +3 +Package_LCC +PLCC-20 +PLCC, 20 pins, surface mount +plcc smt +0 +20 +20 +Package_LCC +PLCC-20_SMD-Socket +PLCC, 20 pins, surface mount +plcc smt +0 +20 +20 +Package_LCC +PLCC-20_THT-Socket +PLCC, 20 pins, through hole +plcc leaded +0 +20 +20 +Package_LCC +PLCC-28 +PLCC, 28 pins, surface mount +plcc smt +0 +28 +28 +Package_LCC +PLCC-28_SMD-Socket +PLCC, 28 pins, surface mount +plcc smt +0 +28 +28 +Package_LCC +PLCC-28_THT-Socket +PLCC, 28 pins, through hole +plcc leaded +0 +28 +28 +Package_LCC +PLCC-32_11.4x14.0mm_P1.27mm +PLCC, 32 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/doc0015.pdf), generated with kicad-footprint-generator ipc_plcc_jLead_generator.py +PLCC LCC +0 +32 +32 +Package_LCC +PLCC-32_THT-Socket +PLCC, 32 pins, through hole, http://www.assmann-wsw.com/fileadmin/datasheets/ASS_0981_CO.pdf +plcc leaded +0 +32 +32 +Package_LCC +PLCC-44 +PLCC, 44 pins, surface mount +plcc smt +0 +44 +44 +Package_LCC +PLCC-44_16.6x16.6mm_P1.27mm +PLCC, 44 Pin (http://www.microsemi.com/index.php?option=com_docman&task=doc_download&gid=131095), generated with kicad-footprint-generator ipc_plcc_jLead_generator.py +PLCC LCC +0 +44 +44 +Package_LCC +PLCC-44_SMD-Socket +PLCC, 44 pins, surface mount +plcc smt +0 +44 +44 +Package_LCC +PLCC-44_THT-Socket +PLCC, 44 pins, through hole +plcc leaded +0 +44 +44 +Package_LCC +PLCC-52 +PLCC, 52 pins, surface mount +plcc smt +0 +52 +52 +Package_LCC +PLCC-52_SMD-Socket +PLCC, 52 pins, surface mount +plcc smt +0 +52 +52 +Package_LCC +PLCC-52_THT-Socket +PLCC, 52 pins, through hole +plcc leaded +0 +52 +52 +Package_LCC +PLCC-68 +PLCC, 68 pins, surface mount +plcc smt +0 +68 +68 +Package_LCC +PLCC-68_24.2x24.2mm_P1.27mm +PLCC, 68 Pin (http://www.microsemi.com/index.php?option=com_docman&task=doc_download&gid=131095), generated with kicad-footprint-generator ipc_plcc_jLead_generator.py +PLCC LCC +0 +68 +68 +Package_LCC +PLCC-68_SMD-Socket +PLCC, 68 pins, surface mount +plcc smt +0 +68 +68 +Package_LCC +PLCC-68_THT-Socket +PLCC, 68 pins, through hole +plcc leaded +0 +68 +68 +Package_LCC +PLCC-84 +PLCC, 84 pins, surface mount +plcc smt +0 +84 +84 +Package_LCC +PLCC-84_29.3x29.3mm_P1.27mm +PLCC, 84 Pin (http://www.microsemi.com/index.php?option=com_docman&task=doc_download&gid=131095), generated with kicad-footprint-generator ipc_plcc_jLead_generator.py +PLCC LCC +0 +84 +84 +Package_LCC +PLCC-84_SMD-Socket +PLCC, 84 pins, surface mount +plcc smt +0 +84 +84 +Package_LCC +PLCC-84_THT-Socket +PLCC, 84 pins, through hole +plcc leaded +0 +84 +84 +Package_LGA +AMS_LGA-10-1EP_2.7x4mm_P0.6mm +LGA-10, http://ams.com/eng/content/download/951091/2269479/471718 +lga land grid array +0 +13 +11 +Package_LGA +AMS_LGA-20_4.7x4.5mm_P0.65mm +http://ams.com/eng/content/download/1008631/2361759/498838 +AMS LGA +0 +20 +20 +Package_LGA +AMS_OLGA-8_2x3.1mm_P0.8mm +AMS OLGA, 8 Pin (https://ams.com/documents/20143/36005/AS7341_DS000504_3-00.pdf/#page=63) +AMS OLGA NoLead +0 +8 +8 +Package_LGA +Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumbering +LGA-8 +lga land grid array +0 +8 +8 +Package_LGA +Bosch_LGA-8_2x2.5mm_P0.65mm_ClockwisePinNumbering +LGA-8, https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMP280-DS001-18.pdf +lga land grid array +0 +8 +8 +Package_LGA +Bosch_LGA-8_3x3mm_P0.8mm_ClockwisePinNumbering +Bosch LGA, 8 Pin (https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BME680-DS001-00.pdf#page=44), generated with kicad-footprint-generator ipc_noLead_generator.py +Bosch LGA NoLead +0 +8 +8 +Package_LGA +Bosch_LGA-14_3x2.5mm_P0.5mm +LGA-14 Bosch https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMI160-DS000-07.pdf +lga land grid array +0 +14 +14 +Package_LGA +Infineon_PG-TSNP-6-10_0.7x1.1mm_0.7x1.1mm_P0.4mm +6 lead, 1.1x0.7mm body, 0.37mm height, TSNP (https://www.infineon.com/cms/en/product/packages/PG-TSNP/PG-TSNP-6-10/) +PG-TSNP-6-10 TSNP +0 +12 +6 +Package_LGA +Kionix_LGA-12_2x2mm_P0.5mm_LayoutBorder2x4y +Kionix LGA, 12 Pin (http://kionixfs.kionix.com/en/document/TN008-PCB-Design-Guidelines-for-2x2-LGA-Sensors.pdf#page=4), generated with kicad-footprint-generator ipc_noLead_generator.py +Kionix LGA NoLead +0 +12 +12 +Package_LGA +LGA-8_3x5mm_P1.25mm +LGA-8 +lga land grid array +0 +8 +8 +Package_LGA +LGA-8_8x6.2mm_P1.27mm +LGA, 8 Pin (https://datasheet.lcsc.com/lcsc/2303241700_Zetta-ZDSD64GLGEAG-R_C5277948.pdf#page=17), generated with kicad-footprint-generator ipc_noLead_generator.py +LGA NoLead +0 +8 +8 +Package_LGA +LGA-8_8x6mm_P1.27mm +LGA, 8 Pin (https://datasheet.lcsc.com/lcsc/2005251034_XTX-XTSD01GLGEAG_C558837.pdf#page=6), generated with kicad-footprint-generator ipc_noLead_generator.py +LGA NoLead +0 +8 +8 +Package_LGA +LGA-12_2x2mm_P0.5mm +LGA12 +lga land grid array +0 +12 +12 +Package_LGA +LGA-14_2x2mm_P0.35mm_LayoutBorder3x4y +LGA, 14 Pin (http://www.st.com/resource/en/datasheet/lis2dh.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LGA NoLead +0 +14 +14 +Package_LGA +LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4y +LGA, 14 Pin (https://www.st.com/resource/en/datasheet/lsm6ds3tr-c.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LGA NoLead +0 +14 +14 +Package_LGA +LGA-14_3x5mm_P0.8mm_LayoutBorder1x6y +LGA, 14 Pin (http://www.st.com/resource/en/datasheet/lsm303dlhc.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LGA NoLead +0 +14 +14 +Package_LGA +LGA-16_3x3mm_P0.5mm +http://www.memsic.com/userfiles/files/DataSheets/Magnetic-Sensors-Datasheets/MMC5883MA-RevC.pdf +lga land grid array +0 +16 +16 +Package_LGA +LGA-16_3x3mm_P0.5mm_LayoutBorder3x5y +LGA, 16 Pin (http://www.st.com/resource/en/datasheet/lis331hh.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LGA NoLead +0 +16 +16 +Package_LGA +LGA-16_4x4mm_P0.65mm_LayoutBorder4x4y +LGA, 16 Pin (http://www.st.com/resource/en/datasheet/l3gd20.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +LGA NoLead +0 +16 +16 +Package_LGA +LGA-24L_3x3.5mm_P0.43mm +LGA 24L 3x3.5mm Pitch 0.43mm +LGA 24L 3x3.5mm Pitch 0.43mm +0 +24 +24 +Package_LGA +LGA-28_5.2x3.8mm_P0.5mm +LGA 28 5.2x3.8mm Pitch 0.5mm +LGA 28 5.2x3.8mm Pitch 0.5mm +0 +28 +28 +Package_LGA +Linear_LGA-133_15.0x15.0mm_Layout12x12_P1.27mm +Analog Devices (Linear Tech), 133-pin LGA uModule, 15.0x15.0x4.32mm, https://www.analog.com/media/en/technical-documentation/data-sheets/4637fc.pdf +133 pin lga +0 +133 +133 +Package_LGA +MPS_LGA-18-10EP_12x12mm_P3.3mm +MPS LGA-18 12x12x3.82mm (https://www.monolithicpower.com/en/documentview/productdocument/index/version/2/document_type/Datasheet/lang/en/sku/MPM3550EGLE/document_id/5102/) +MPS LGA +0 +18 +18 +Package_LGA +NXP_LGA-8_3x5mm_P1.25mm_H1.1mm +NXP LGA, 8 Pin (https://www.nxp.com/docs/en/data-sheet/MPL3115A2.pdf#page=42), generated with kicad-footprint-generator ipc_noLead_generator.py +NXP LGA NoLead +0 +8 +8 +Package_LGA +NXP_LGA-8_3x5mm_P1.25mm_H1.2mm +NXP LGA, 8 Pin (https://www.nxp.com/docs/en/data-sheet/MPL115A1.pdf#page=15), generated with kicad-footprint-generator ipc_noLead_generator.py +NXP LGA NoLead +0 +8 +8 +Package_LGA +Rohm_MLGA010V020A_LGA-10_2x2mm_P0.45mm_LayoutBorder_3x2y +Rohm LGA, 10 Pin (https://fscdn.rohm.com/en/techdata_basic/ic/package/Jisso_MLGA010V020A-1-2_Rev005s_E2(MSL3).pdf) +Rohm LGA NoLead +0 +10 +10 +Package_LGA +ST_HLGA-10_2.5x2.5mm_P0.6mm_LayoutBorder3x2y +ST HLGA, 10 Pin (https://www.st.com/resource/en/datasheet/lps25hb.pdf#page=46), generated with kicad-footprint-generator ipc_noLead_generator.py +ST HLGA NoLead +0 +10 +10 +Package_LGA +ST_HLGA-10_2x2mm_P0.5mm_LayoutBorder3x2y +ST HLGA, 10 Pin (https://www.st.com/resource/en/datasheet/lps22hh.pdf#page=55), generated with kicad-footprint-generator ipc_noLead_generator.py +ST HLGA NoLead +0 +10 +10 +Package_LGA +Texas_SIL0008D_MicroSiP-8-1EP_2.8x3mm_P0.65mm_EP1.1x1.9mm +Texas SIL0008D MicroSiP, 8 Pin (http://www.ti.com/lit/ds/symlink/tps82130.pdf#page=19), generated with kicad-footprint-generator ipc_noLead_generator.py +Texas MicroSiP NoLead +0 +12 +9 +Package_LGA +Texas_SIL0008D_MicroSiP-8-1EP_2.8x3mm_P0.65mm_EP1.1x1.9mm_ThermalVias +Texas SIL0008D MicroSiP, 8 Pin (http://www.ti.com/lit/ds/symlink/tps82130.pdf#page=19), generated with kicad-footprint-generator ipc_noLead_generator.py +Texas MicroSiP NoLead +0 +16 +9 +Package_LGA +Texas_SIL0010A_MicroSiP-10-1EP_3.8x3mm_P0.6mm_EP0.7x2.9mm +Texas SIL0010A MicroSiP, 10 Pin (http://www.ti.com/lit/ml/mpds579b/mpds579b.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +Texas MicroSiP NoLead +0 +14 +11 +Package_LGA +Texas_SIL0010A_MicroSiP-10-1EP_3.8x3mm_P0.6mm_EP0.7x2.9mm_ThermalVias +Texas SIL0010A MicroSiP, 10 Pin (http://www.ti.com/lit/ml/mpds579b/mpds579b.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +Texas MicroSiP NoLead +0 +18 +11 +Package_LGA +VLGA-4_2x2.5mm_P1.65mm +VLGA, 4 Pin (https://ww1.microchip.com/downloads/en/DeviceDoc/DSC60XX-Ultra-Small-Ultra-Low-Power-MEMS-Oscillator-DS20005625C.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +VLGA NoLead +0 +4 +4 +Package_QFP +EQFP-144-1EP_20x20mm_P0.5mm_EP4x4mm +EQFP, 144 Pin (https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/packaging/04r00482-02.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +EQFP QFP +0 +154 +145 +Package_QFP +EQFP-144-1EP_20x20mm_P0.5mm_EP4x4mm_ThermalVias +EQFP, 144 Pin (https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/packaging/04r00482-02.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +EQFP QFP +0 +171 +145 +Package_QFP +EQFP-144-1EP_20x20mm_P0.5mm_EP5x5mm +EQFP, 144 Pin (https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/packaging/04r00476-02.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +EQFP QFP +0 +161 +145 +Package_QFP +EQFP-144-1EP_20x20mm_P0.5mm_EP5x5mm_ThermalVias +EQFP, 144 Pin (https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/packaging/04r00476-02.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +EQFP QFP +0 +187 +145 +Package_QFP +EQFP-144-1EP_20x20mm_P0.5mm_EP6.61x5.615mm +EQFP, 144 Pin (https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/packaging/04r00485-02.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +EQFP QFP +0 +165 +145 +Package_QFP +EQFP-144-1EP_20x20mm_P0.5mm_EP6.61x5.615mm_ThermalVias +EQFP, 144 Pin (https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/packaging/04r00485-02.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +EQFP QFP +0 +196 +145 +Package_QFP +EQFP-144-1EP_20x20mm_P0.5mm_EP7.2x6.35mm +EQFP, 144 Pin (https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/packaging/04r00487-01.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +EQFP QFP +0 +175 +145 +Package_QFP +EQFP-144-1EP_20x20mm_P0.5mm_EP7.2x6.35mm_ThermalVias +EQFP, 144 Pin (https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/packaging/04r00487-01.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +EQFP QFP +0 +218 +145 +Package_QFP +EQFP-144-1EP_20x20mm_P0.5mm_EP8.93x8.7mm +EQFP, 144 Pin (https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/packaging/04r00479-02.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +EQFP QFP +0 +194 +145 +Package_QFP +EQFP-144-1EP_20x20mm_P0.5mm_EP8.93x8.7mm_ThermalVias +EQFP, 144 Pin (https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/packaging/04r00479-02.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +EQFP QFP +0 +259 +145 +Package_QFP +HTQFP-64-1EP_10x10mm_P0.5mm_EP8x8mm +64-Lead Plastic Thin Quad Flatpack (PT) - 10x10x1 mm Body, 2.00 mm Footprint [HTQFP] thermal pad +HTQFP-64 Pitch 0.5 +0 +69 +65 +Package_QFP +HTQFP-64-1EP_10x10mm_P0.5mm_EP8x8mm_Mask4.4x4.4mm_ThermalVias +64-Lead Plastic Thin Quad Flatpack (PT) - 10x10x1 mm Body, 2.00 mm Footprint [HTQFP] thermal pad +HTQFP-64 Pitch 0.5 +0 +135 +65 +Package_QFP +LQFP-32_5x5mm_P0.5mm +LQFP, 32 Pin (https://www.nxp.com/docs/en/package-information/SOT401-1.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +LQFP QFP +0 +32 +32 +Package_QFP +LQFP-32_7x7mm_P0.8mm +LQFP, 32 Pin (https://www.nxp.com/docs/en/package-information/SOT358-1.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +LQFP QFP +0 +32 +32 +Package_QFP +LQFP-36_7x7mm_P0.65mm +LQFP, 36 Pin (https://www.onsemi.com/pub/Collateral/561AV.PDF), generated with kicad-footprint-generator ipc_gullwing_generator.py +LQFP QFP +0 +36 +36 +Package_QFP +LQFP-44_10x10mm_P0.8mm +LQFP, 44 Pin (https://www.nxp.com/files-static/shared/doc/package_info/98ASS23225W.pdf?&fsrch=1), generated with kicad-footprint-generator ipc_gullwing_generator.py +LQFP QFP +0 +44 +44 +Package_QFP +LQFP-48-1EP_7x7mm_P0.5mm_EP3.6x3.6mm +LQFP, 48 Pin (http://www.analog.com/media/en/technical-documentation/data-sheets/LTC7810.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +LQFP QFP +0 +58 +49 +Package_QFP +LQFP-48-1EP_7x7mm_P0.5mm_EP3.6x3.6mm_ThermalVias +LQFP, 48 Pin (http://www.analog.com/media/en/technical-documentation/data-sheets/LTC7810.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +LQFP QFP +0 +75 +49 +Package_QFP +LQFP-48_7x7mm_P0.5mm +LQFP, 48 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/ltc2358-16.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +LQFP QFP +0 +48 +48 +Package_QFP +LQFP-52-1EP_10x10mm_P0.65mm_EP4.8x4.8mm +LQFP, 52 Pin (https://www.onsemi.com/pub/Collateral/848H-01.PDF), generated with kicad-footprint-generator ipc_gullwing_generator.py +LQFP QFP +0 +62 +53 +Package_QFP +LQFP-52-1EP_10x10mm_P0.65mm_EP4.8x4.8mm_ThermalVias +LQFP, 52 Pin (https://www.onsemi.com/pub/Collateral/848H-01.PDF), generated with kicad-footprint-generator ipc_gullwing_generator.py +LQFP QFP +0 +95 +53 +Package_QFP +LQFP-52_10x10mm_P0.65mm +LQFP, 52 Pin (https://www.nxp.com/docs/en/package-information/98ARL10526D.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +LQFP QFP +0 +52 +52 +Package_QFP +LQFP-52_14x14mm_P1mm +LQFP, 52 Pin (http://www.holtek.com/documents/10179/116711/HT1632Cv170.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +LQFP QFP +0 +52 +52 +Package_QFP +LQFP-64-1EP_10x10mm_P0.5mm_EP5x5mm +LQFP, 64 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/adv7611.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +LQFP QFP +0 +90 +65 +Package_QFP +LQFP-64-1EP_10x10mm_P0.5mm_EP5x5mm_ThermalVias +LQFP, 64 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/adv7611.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +LQFP QFP +0 +107 +65 +Package_QFP +LQFP-64-1EP_10x10mm_P0.5mm_EP6.5x6.5mm +LQFP, 64 Pin (https://www.nxp.com/files-static/shared/doc/package_info/98ARH98426A.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +LQFP QFP +0 +90 +65 +Package_QFP +LQFP-64-1EP_10x10mm_P0.5mm_EP6.5x6.5mm_ThermalVias +LQFP, 64 Pin (https://www.nxp.com/files-static/shared/doc/package_info/98ARH98426A.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +LQFP QFP +0 +127 +65 +Package_QFP +LQFP-64_7x7mm_P0.4mm +LQFP, 64 Pin (https://www.nxp.com/docs/en/package-information/SOT414-1.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +LQFP QFP +0 +64 +64 +Package_QFP +LQFP-64_10x10mm_P0.5mm +LQFP, 64 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/ad7606_7606-6_7606-4.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +LQFP QFP +0 +64 +64 +Package_QFP +LQFP-64_14x14mm_P0.8mm +LQFP, 64 Pin (https://www.nxp.com/docs/en/package-information/SOT791-1.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +LQFP QFP +0 +64 +64 +Package_QFP +LQFP-80_10x10mm_P0.4mm +LQFP, 80 Pin (https://www.renesas.com/eu/en/package-image/pdf/outdrawing/q80.10x10.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +LQFP QFP +0 +80 +80 +Package_QFP +LQFP-80_12x12mm_P0.5mm +LQFP, 80 Pin (https://www.nxp.com/docs/en/package-information/SOT315-1.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +LQFP QFP +0 +80 +80 +Package_QFP +LQFP-80_14x14mm_P0.65mm +LQFP, 80 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/AD9852.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +LQFP QFP +0 +80 +80 +Package_QFP +LQFP-100_14x14mm_P0.5mm +LQFP, 100 Pin (https://www.nxp.com/docs/en/package-information/SOT407-1.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +LQFP QFP +0 +100 +100 +Package_QFP +LQFP-128_14x14mm_P0.4mm +LQFP, 128 Pin (https://www.renesas.com/eu/en/package-image/pdf/outdrawing/q128.14x14.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +LQFP QFP +0 +128 +128 +Package_QFP +LQFP-128_14x20mm_P0.5mm +LQFP, 128 Pin (https://www.nxp.com/docs/en/package-information/SOT425-1.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +LQFP QFP +0 +128 +128 +Package_QFP +LQFP-144_20x20mm_P0.5mm +LQFP, 144 Pin (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf#page=425), generated with kicad-footprint-generator ipc_gullwing_generator.py +LQFP QFP +0 +144 +144 +Package_QFP +LQFP-160_24x24mm_P0.5mm +LQFP, 160 Pin (https://www.nxp.com/docs/en/package-information/SOT435-1.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +LQFP QFP +0 +160 +160 +Package_QFP +LQFP-176_20x20mm_P0.4mm +LQFP, 176 Pin (https://www.onsemi.com/pub/Collateral/566DB.PDF), generated with kicad-footprint-generator ipc_gullwing_generator.py +LQFP QFP +0 +176 +176 +Package_QFP +LQFP-176_24x24mm_P0.5mm +LQFP, 176 Pin (https://www.st.com/resource/en/datasheet/stm32f207vg.pdf#page=163), generated with kicad-footprint-generator ipc_gullwing_generator.py +LQFP QFP +0 +176 +176 +Package_QFP +LQFP-208_28x28mm_P0.5mm +LQFP, 208 Pin (https://www.nxp.com/docs/en/package-information/SOT459-1.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +LQFP QFP +0 +208 +208 +Package_QFP +LQFP-216_24x24mm_P0.4mm +LQFP, 216 Pin (https://www.onsemi.com/pub/Collateral/561BE.PDF), generated with kicad-footprint-generator ipc_gullwing_generator.py +LQFP QFP +0 +216 +216 +Package_QFP +MQFP-44_10x10mm_P0.8mm +MQFP, 44 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/ad7722.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +MQFP QFP +0 +44 +44 +Package_QFP +PQFP-32_5x5mm_P0.5mm +PQFP, 32 Pin (https://www.ti.com/lit/ds/symlink/ads127l01.pdf#page=87), generated with kicad-footprint-generator ipc_gullwing_generator.py +PQFP QFP +0 +32 +32 +Package_QFP +PQFP-44_10x10mm_P0.8mm +44-Lead Plastic Quad Flatpack - 10x10x2.5mm Body (http://www.onsemi.com/pub/Collateral/122BK.PDF) +PQFP 0.8 +0 +44 +44 +Package_QFP +PQFP-64_14x14mm_P0.8mm +PQFP, 64 Pin (https://www.renesas.com/us/en/document/psc/package-drawing-qfp-64pin-prqp0064gb), generated with kicad-footprint-generator ipc_gullwing_generator.py +PQFP QFP +0 +64 +64 +Package_QFP +PQFP-80_14x20mm_P0.8mm +PQFP80 14x20 / QIP80E CASE 122BS (see ON Semiconductor 122BS.PDF) +QFP 0.8 +0 +80 +80 +Package_QFP +PQFP-100_14x20mm_P0.65mm +PQFP, 100 Pin (http://www.microsemi.com/index.php?option=com_docman&task=doc_download&gid=131095), generated with kicad-footprint-generator ipc_gullwing_generator.py +PQFP QFP +0 +100 +100 +Package_QFP +PQFP-112_20x20mm_P0.65mm +PQFP, 112 pins, 20mm sq body, 0.65mm pitch (http://cache.freescale.com/files/shared/doc/package_info/98ASS23330W.pdf, http://www.nxp.com/docs/en/application-note/AN4388.pdf) +PQFP 112 +0 +112 +112 +Package_QFP +PQFP-132_24x24mm_P0.635mm +PQFP, 132 pins, 24mm sq body, 0.635mm pitch (https://www.intel.com/content/dam/www/public/us/en/documents/packaging-databooks/packaging-chapter-02-databook.pdf, http://www.nxp.com/docs/en/application-note/AN4388.pdf) +PQFP 132 +0 +132 +132 +Package_QFP +PQFP-132_24x24mm_P0.635mm_i386 +PQFP, 132 pins, 24mm sq body, 0.635mm pitch, Intel 386EX (https://www.intel.com/content/dam/www/public/us/en/documents/packaging-databooks/packaging-chapter-02-databook.pdf, http://www.nxp.com/docs/en/application-note/AN4388.pdf) +PQFP 132 Intel 386EX +0 +132 +132 +Package_QFP +PQFP-144_28x28mm_P0.65mm +PQFP, 144 Pin (http://www.microsemi.com/index.php?option=com_docman&task=doc_download&gid=131095), generated with kicad-footprint-generator ipc_gullwing_generator.py +PQFP QFP +0 +144 +144 +Package_QFP +PQFP-160_28x28mm_P0.65mm +PQFP, 160 Pin (http://www.microsemi.com/index.php?option=com_docman&task=doc_download&gid=131095), generated with kicad-footprint-generator ipc_gullwing_generator.py +PQFP QFP +0 +160 +160 +Package_QFP +PQFP-168_28x28mm_P0.65mm +PQFP, 168 Pin (https://www.renesas.cn/cn/zh/document/psc/package-drawing-qfp-168pin-prqp0168jb), generated with kicad-footprint-generator ipc_gullwing_generator.py +PQFP QFP +0 +168 +168 +Package_QFP +PQFP-208_28x28mm_P0.5mm +PQFP, 208 Pin (http://www.microsemi.com/index.php?option=com_docman&task=doc_download&gid=131095), generated with kicad-footprint-generator ipc_gullwing_generator.py +PQFP QFP +0 +208 +208 +Package_QFP +PQFP-240_32.1x32.1mm_P0.5mm +PQFP, 240 Pin (http://www.microsemi.com/index.php?option=com_docman&task=doc_download&gid=131095), generated with kicad-footprint-generator ipc_gullwing_generator.py +PQFP QFP +0 +240 +240 +Package_QFP +PQFP-256_28x28mm_P0.4mm +PQFP256 28x28 / QFP256J CASE 122BX (see ON Semiconductor 122BX.PDF) +QFP 0.4 +0 +256 +256 +Package_QFP +TQFP-32_7x7mm_P0.8mm +32-Lead Plastic Thin Quad Flatpack (PT) - 7x7x1.0 mm Body, 2.00 mm [TQFP] (see Microchip Packaging Specification 00000049BS.pdf) +QFP 0.8 +0 +32 +32 +Package_QFP +TQFP-44-1EP_10x10mm_P0.8mm_EP4.5x4.5mm +44-Lead Plastic Thin Quad Flatpack (MW) - 10x10x1.0 mm Body [TQFP] With 4.5x4.5 mm Exposed Pad (see Microchip Packaging Specification 00000049BS.pdf) +QFP 0.8 +0 +54 +45 +Package_QFP +TQFP-44_10x10mm_P0.8mm +44-Lead Plastic Thin Quad Flatpack (PT) - 10x10x1.0 mm Body [TQFP] (see Microchip Packaging Specification 00000049BS.pdf) +QFP 0.8 +0 +44 +44 +Package_QFP +TQFP-48-1EP_7x7mm_P0.5mm_EP3.5x3.5mm +48-Lead Thin Quad Flatpack (PT) - 7x7x1.0 mm Body [TQFP] With Exposed Pad (see Microchip Packaging Specification 00000049BS.pdf) +QFP 0.5 +0 +53 +49 +Package_QFP +TQFP-48-1EP_7x7mm_P0.5mm_EP4.11x4.11mm +TQFP, 48 Pin (https://www.lumissil.com/assets/pdf/core/IS31FL3236_DS.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +TQFP QFP +0 +65 +49 +Package_QFP +TQFP-48-1EP_7x7mm_P0.5mm_EP5x5mm +TQFP, 48 Pin (https://www.trinamic.com/fileadmin/assets/Products/ICs_Documents/TMC2100_datasheet_Rev1.08.pdf (page 45)), generated with kicad-footprint-generator ipc_gullwing_generator.py +TQFP QFP +0 +65 +49 +Package_QFP +TQFP-48-1EP_7x7mm_P0.5mm_EP5x5mm_ThermalVias +TQFP, 48 Pin (https://www.trinamic.com/fileadmin/assets/Products/ICs_Documents/TMC2100_datasheet_Rev1.08.pdf (page 45)), generated with kicad-footprint-generator ipc_gullwing_generator.py +TQFP QFP +0 +91 +49 +Package_QFP +TQFP-48_7x7mm_P0.5mm +TQFP, 48 Pin (https://www.jedec.org/system/files/docs/MS-026D.pdf var ABC), generated with kicad-footprint-generator ipc_gullwing_generator.py +TQFP QFP +0 +48 +48 +Package_QFP +TQFP-52-1EP_10x10mm_P0.65mm_EP6.5x6.5mm +TQFP, 52 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/tqfp_edsv/sv_52_1.pdf), generated with kicad-footprint-generator ipc_qfp_generator.py +TQFP QFP +0 +78 +53 +Package_QFP +TQFP-52-1EP_10x10mm_P0.65mm_EP6.5x6.5mm_ThermalVias +TQFP, 52 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/tqfp_edsv/sv_52_1.pdf), generated with kicad-footprint-generator ipc_qfp_generator.py +TQFP QFP +0 +79 +53 +Package_QFP +TQFP-64-1EP_10x10mm_P0.5mm_EP8x8mm +64-Lead Plastic Thin Quad Flatpack (PT) - 10x10x1 mm Body, 2.00 mm Footprint [TQFP] thermal pad +QFP 0.5 +0 +90 +65 +Package_QFP +TQFP-64_7x7mm_P0.4mm +TQFP64 7x7, 0.4P CASE 932BH (see ON Semiconductor 932BH.PDF) +QFP 0.4 +0 +64 +64 +Package_QFP +TQFP-64_10x10mm_P0.5mm +TQFP, 64 Pin (http://www.microsemi.com/index.php?option=com_docman&task=doc_download&gid=131095), generated with kicad-footprint-generator ipc_gullwing_generator.py +TQFP QFP +0 +64 +64 +Package_QFP +TQFP-64_14x14mm_P0.8mm +64-Lead Plastic Thin Quad Flatpack (PF) - 14x14x1 mm Body, 2.00 mm [TQFP] (see Microchip Packaging Specification 00000049BS.pdf) +QFP 0.8 +0 +64 +64 +Package_QFP +TQFP-80-1EP_14x14mm_P0.65mm_EP9.5x9.5mm +80-Lead Plastic Thin Quad Flatpack (PF) - 14x14mm body, 9.5mm sq thermal pad (http://www.analog.com/media/en/technical-documentation/data-sheets/AD9852.pdf) +QFP 0.65 +0 +85 +81 +Package_QFP +TQFP-80_12x12mm_P0.5mm +80-Lead Plastic Thin Quad Flatpack (PT) - 12x12x1 mm Body, 2.00 mm [TQFP] (see Microchip Packaging Specification 00000049BS.pdf) +QFP 0.5 +0 +80 +80 +Package_QFP +TQFP-80_14x14mm_P0.65mm +80-Lead Plastic Thin Quad Flatpack (PF) - 14x14x1 mm Body, 2.00 mm [TQFP] (see Microchip Packaging Specification 00000049BS.pdf) +QFP 0.65 +0 +80 +80 +Package_QFP +TQFP-100-1EP_14x14mm_P0.5mm_EP5x5mm +TQFP, 100 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/tqfp_edsv/sv_100_4.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +TQFP QFP +0 +117 +101 +Package_QFP +TQFP-100-1EP_14x14mm_P0.5mm_EP5x5mm_ThermalVias +TQFP, 100 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/tqfp_edsv/sv_100_4.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +TQFP QFP +0 +143 +101 +Package_QFP +TQFP-100_12x12mm_P0.4mm +100-Lead Plastic Thin Quad Flatpack (PT) - 12x12x1 mm Body, 2.00 mm [TQFP] (see Microchip Packaging Specification 00000049BS.pdf) +QFP 0.4 +0 +100 +100 +Package_QFP +TQFP-100_14x14mm_P0.5mm +TQFP, 100 Pin (http://www.microsemi.com/index.php?option=com_docman&task=doc_download&gid=131095), generated with kicad-footprint-generator ipc_gullwing_generator.py +TQFP QFP +0 +100 +100 +Package_QFP +TQFP-120_14x14mm_P0.4mm +TQFP120 14x14 / TQFP120 CASE 932AZ (see ON Semiconductor 932AZ.PDF) +QFP 0.4 +0 +120 +120 +Package_QFP +TQFP-128_14x14mm_P0.4mm +TQFP128 14x14 / TQFP128 CASE 932BB (see ON Semiconductor 932BB.PDF) +QFP 0.4 +0 +128 +128 +Package_QFP +TQFP-144_16x16mm_P0.4mm +144-Lead Plastic Thin Quad Flatpack (PH) - 16x16x1 mm Body, 2.00 mm Footprint [TQFP] (see Microchip Packaging Specification 00000049BS.pdf) +QFP 0.4 +0 +144 +144 +Package_QFP +TQFP-144_20x20mm_P0.5mm +TQFP, 144 Pin (http://www.microsemi.com/index.php?option=com_docman&task=doc_download&gid=131095), generated with kicad-footprint-generator ipc_gullwing_generator.py +TQFP QFP +0 +144 +144 +Package_QFP +TQFP-176_24x24mm_P0.5mm +TQFP, 176 Pin (http://www.microsemi.com/index.php?option=com_docman&task=doc_download&gid=131095), generated with kicad-footprint-generator ipc_gullwing_generator.py +TQFP QFP +0 +176 +176 +Package_QFP +Texas_PHP0048E_HTQFP-48-1EP_7x7mm_P0.5mm_EP6.5x6.5mm_Mask3.62x3.62mm +Texas PHP0048E HTQFP, 48 Pin (https://www.ti.com/lit/ds/symlink/tusb4020bi.pdf#page=42), generated with kicad-footprint-generator ipc_gullwing_generator.py +Texas HTQFP QFP +0 +51 +49 +Package_QFP +Texas_PHP0048E_HTQFP-48-1EP_7x7mm_P0.5mm_EP6.5x6.5mm_Mask3.62x3.62mm_ThermalVias +Texas PHP0048E HTQFP, 48 Pin (https://www.ti.com/lit/ds/symlink/tusb4020bi.pdf#page=42), generated with kicad-footprint-generator ipc_gullwing_generator.py +Texas HTQFP QFP +0 +88 +49 +Package_QFP +VQFP-80_14x14mm_P0.65mm +VQFP, 80 Pin (http://www.microsemi.com/index.php?option=com_docman&task=doc_download&gid=131095), generated with kicad-footprint-generator ipc_gullwing_generator.py +VQFP QFP +0 +80 +80 +Package_QFP +VQFP-100_14x14mm_P0.5mm +VQFP, 100 Pin (http://www.microsemi.com/index.php?option=com_docman&task=doc_download&gid=131095), generated with kicad-footprint-generator ipc_gullwing_generator.py +VQFP QFP +0 +100 +100 +Package_QFP +VQFP-128_14x14mm_P0.4mm +VQFP, 128 Pin (http://www.microsemi.com/index.php?option=com_docman&task=doc_download&gid=131095), generated with kicad-footprint-generator ipc_gullwing_generator.py +VQFP QFP +0 +128 +128 +Package_QFP +VQFP-176_20x20mm_P0.4mm +VQFP, 176 Pin (http://www.microsemi.com/index.php?option=com_docman&task=doc_download&gid=131095), generated with kicad-footprint-generator ipc_gullwing_generator.py +VQFP QFP +0 +176 +176 +Package_SIP +PowerIntegrations_eSIP-7C +eSIP-7C Vertical Flat Package with Heatsink Tab, https://ac-dc.power.com/sites/default/files/product-docs/topswitch-jx_family_datasheet.pdf +Power Integrations E Package +0 +6 +6 +Package_SIP +PowerIntegrations_eSIP-7F +eSIP-7F Flat Package with Heatsink Tab https://ac-dc.power.com/sites/default/files/product-docs/linkswitch-ph_family_datasheet.pdf +Power Integrations L Package +0 +6 +6 +Package_SIP +SIP-8_19x3mm_P2.54mm +SIP 8-pin (http://www.njr.com/semicon/PDF/package/SIP8_E.pdf) +SIP8 +0 +8 +8 +Package_SIP +SIP-9_21.54x3mm_P2.54mm +SIP 9-pin () +SIP8 +0 +9 +9 +Package_SIP +SIP-9_22.3x3mm_P2.54mm +SIP 9-pin () +SIP8 +0 +9 +9 +Package_SIP +SIP3_11.6x8.5mm +RECOM,R78EXX,https://www.recom-power.com/pdf/Innoline/R-78Exx-0.5.pdf +SIP3 Regulator Module +0 +3 +3 +Package_SIP +SIP4_Sharp-SSR_P7.62mm_Angled +SIP4 Footprint for SSR made by Sharp +Solid State relais SSR Sharp +0 +4 +4 +Package_SIP +SIP4_Sharp-SSR_P7.62mm_Angled_NoHole +SIP4 Footprint for SSR made by Sharp +Solid State relais SSR Sharp +0 +4 +4 +Package_SIP +SIP4_Sharp-SSR_P7.62mm_Straight +SIP4 Footprint for SSR made by Sharp +Solid State relais SSR Sharp +0 +4 +4 +Package_SIP +SIP9_Housing +SIP9 +SIP9 +0 +9 +9 +Package_SIP +SIP9_Housing_BigPads +SIP9, large pads +SIP9 +0 +9 +9 +Package_SIP +SLA704XM +SIP SLA704XM (http://www.sumzi.com/upload/files/2007/07/2007073114282034189.PDF) +SIP +0 +18 +18 +Package_SIP +STK672-040-E +SIP-22 (http://www.onsemi.com/pub_link/Collateral/EN5227-D.PDF) +SIP-22 +0 +22 +22 +Package_SIP +STK672-080-E +SIP-15 (http://www.onsemi.com/pub_link/Collateral/EN6507-D.PDF) +SIP-15 +0 +15 +15 +Package_SIP +Sanyo_STK4xx-15_59.2x8.0mm_P2.54mm +Sanyo SIP-15, 59.2mm x 8.0mm bosy size, STK-433E STK-435E STK-436E (http://datasheet.octopart.com/STK430-Sanyo-datasheet-107060.pdf) +Sanyo SIP-15 +0 +15 +15 +Package_SIP +Sanyo_STK4xx-15_78.0x8.0mm_P2.54mm +Sanyo SIP-15, 78.0mm x 8.0mm bosy size, STK-437E STK-439E STK-441E STK-443E (http://datasheet.octopart.com/STK430-Sanyo-datasheet-107060.pdf) +Sanyo SIP-15 +0 +15 +15 +Package_SO +Diodes_PSOP-8 +8-Lead Plastic PSOP, Exposed Die Pad (see https://www.diodes.com/assets/Datasheets/AP2204.pdf) +SSOP 0.50 exposed pad +0 +12 +9 +Package_SO +Diodes_SO-8EP +8-Lead Plastic SO, Exposed Die Pad (see https://www.diodes.com/assets/Package-Files/SO-8EP.pdf) +SO exposed pad +0 +9 +9 +Package_SO +ETSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP3x4.2mm +20-Lead Plastic Thin Shrink Small Outline (ST)-4.4 mm Body with Exposed Pad [eTSSOP] (see Microchip Packaging Specification 00000049BS.pdf) +SSOP 0.65 +0 +27 +21 +Package_SO +HSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.3x2.3mm +HSOP, 8 Pin (https://www.st.com/resource/en/datasheet/l7980.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +HSOP SO +0 +13 +9 +Package_SO +HSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.3x2.3mm_ThermalVias +HSOP, 8 Pin (https://www.st.com/resource/en/datasheet/l7980.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +HSOP SO +0 +18 +9 +Package_SO +HSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.1mm +HSOP, 8 Pin (https://www.st.com/resource/en/datasheet/l5973d.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +HSOP SO +0 +13 +9 +Package_SO +HSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.1mm_ThermalVias +HSOP, 8 Pin (https://www.st.com/resource/en/datasheet/l5973d.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +HSOP SO +0 +20 +9 +Package_SO +HSOP-20-1EP_11.0x15.9mm_P1.27mm_SlugDown +HSOP 11.0x15.9mm Pitch 1.27mm Slug Down (PowerSO-20) [JEDEC MO-166] (http://www.st.com/resource/en/datasheet/tda7266d.pdf, www.st.com/resource/en/application_note/cd00003801.pdf) +HSOP 11.0 x 15.9mm Pitch 1.27mm +0 +23 +21 +Package_SO +HSOP-20-1EP_11.0x15.9mm_P1.27mm_SlugDown_ThermalVias +HSOP 11.0x15.9mm Pitch 1.27mm Slug Down Thermal Vias (PowerSO-20) [JEDEC MO-166] (http://www.st.com/resource/en/datasheet/tda7266d.pdf, www.st.com/resource/en/application_note/cd00003801.pdf) +HSOP 11.0 x 15.9mm Pitch 1.27mm +0 +45 +21 +Package_SO +HSOP-20-1EP_11.0x15.9mm_P1.27mm_SlugUp +HSOP 11.0x15.9mm Pitch 1.27mm Slug Up (PowerSO-20) [JEDEC MO-166] (http://www.st.com/resource/en/datasheet/tda7266d.pdf, www.st.com/resource/en/application_note/cd00003801.pdf) +HSOP 11.0 x 15.9mm Pitch 1.27mm +0 +20 +20 +Package_SO +HSOP-32-1EP_7.5x11mm_P0.65mm_EP4.7x4.7mm +HSOP, 32 Pin (https://www.nxp.com/docs/en/package-information/SOT1746-3.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +HSOP SO +0 +37 +33 +Package_SO +HSOP-36-1EP_11.0x15.9mm_P0.65mm_SlugDown +HSOP 11.0x15.9mm Pitch 0.65mm Slug Down (PowerSO-36) [JEDEC MO-166] (http://www.st.com/resource/en/datasheet/vn808cm-32-e.pdf, http://www.st.com/resource/en/application_note/cd00003801.pdf) +HSOP 11.0 x 15.9mm Pitch 0.65mm +0 +39 +37 +Package_SO +HSOP-36-1EP_11.0x15.9mm_P0.65mm_SlugDown_ThermalVias +HSOP 11.0x15.9mm Pitch 0.65mm Slug Down Thermal Vias (PowerSO-36) [JEDEC MO-166] (http://www.st.com/resource/en/datasheet/vn808cm-32-e.pdf, http://www.st.com/resource/en/application_note/cd00003801.pdf) +HSOP 11.0 x 15.9mm Pitch 0.65mm +0 +61 +37 +Package_SO +HSOP-36-1EP_11.0x15.9mm_P0.65mm_SlugUp +HSOP 11.0x15.9mm Pitch 0.65mm Slug Up (PowerSO-36) [JEDEC MO-166] (http://www.st.com/resource/en/datasheet/vn808cm-32-e.pdf, http://www.st.com/resource/en/application_note/cd00003801.pdf) +HSOP 11.0 x 15.9mm Pitch 0.65mm +0 +36 +36 +Package_SO +HSOP-54-1EP_7.5x17.9mm_P0.65mm_EP4.6x4.6mm +HSOP, 54 Pin (https://www.nxp.com/docs/en/package-information/98ASA10506D.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +HSOP SO +0 +59 +55 +Package_SO +HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.4x3.2mm +HTSOP, 8 Pin (https://media.digikey.com/pdf/Data%20Sheets/Rohm%20PDFs/BD9G341EFJ.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +HTSOP SO +0 +13 +9 +Package_SO +HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.4x3.2mm_ThermalVias +HTSOP, 8 Pin (https://media.digikey.com/pdf/Data%20Sheets/Rohm%20PDFs/BD9G341EFJ.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +HTSOP SO +0 +20 +9 +Package_SO +HTSSOP-14-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask3x3.1mm +HTSSOP, 14 Pin (http://www.ti.com/lit/ds/symlink/lm5161.pdf#page=34), generated with kicad-footprint-generator ipc_gullwing_generator.py +HTSSOP SO +0 +20 +15 +Package_SO +HTSSOP-14-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask3x3.1mm_ThermalVias +HTSSOP, 14 Pin (http://www.ti.com/lit/ds/symlink/lm5161.pdf#page=34), generated with kicad-footprint-generator ipc_gullwing_generator.py +HTSSOP SO +0 +36 +15 +Package_SO +HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm +16-Lead Plastic HTSSOP (4.4x5x1.2mm); Thermal pad; (http://www.ti.com/lit/ds/symlink/drv8833.pdf) +SSOP 0.65 +0 +29 +17 +Package_SO +HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask2.46x2.31mm +HTSSOP, 16 Pin (http://www.analog.com/media/en/technical-documentation/data-sheets/LTC7810.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +HTSSOP SO +0 +20 +17 +Package_SO +HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask2.46x2.31mm_ThermalVias +HTSSOP, 16 Pin (http://www.analog.com/media/en/technical-documentation/data-sheets/LTC7810.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +HTSSOP SO +0 +27 +17 +Package_SO +HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask3x3mm_ThermalVias +16-Lead Plastic HTSSOP (4.4x5x1.2mm); Thermal pad with vias; (http://www.ti.com/lit/ds/symlink/drv8800.pdf) +SSOP 0.65 +0 +46 +17 +Package_SO +HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3x3mm +HTSSOP, 16 Pin (https://www.st.com/resource/en/datasheet/stp08cp05.pdf#page=20), generated with kicad-footprint-generator ipc_gullwing_generator.py +HTSSOP SO +0 +21 +17 +Package_SO +HTSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP2.74x3.86mm +HTSSOP, 20 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/4011fb.pdf#page=24), generated with kicad-footprint-generator ipc_gullwing_generator.py +HTSSOP SO +0 +23 +21 +Package_SO +HTSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP2.85x4mm +HTSSOP, 20 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0108.PDF U20E-1), generated with kicad-footprint-generator ipc_gullwing_generator.py +HTSSOP SO +0 +23 +21 +Package_SO +HTSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP3.4x6.5mm +20-Lead Plastic Thin Shrink Small Outline (ST)-4.4 mm Body [HTSSOP], with thermal pad with vias +HTSSOP 0.65 +0 +29 +21 +Package_SO +HTSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP3.4x6.5mm_Mask2.4x3.7mm +HTSSOP, 20 Pin (http://www.ti.com/lit/ds/symlink/bq24006.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +HTSSOP SO +0 +24 +21 +Package_SO +HTSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP3.4x6.5mm_Mask2.75x3.43mm +HTSSOP, 20 Pin (http://www.ti.com/lit/ds/symlink/tlc5971.pdf#page=37&zoom=160,-90,3), generated with kicad-footprint-generator ipc_gullwing_generator.py +HTSSOP SO +0 +26 +21 +Package_SO +HTSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP3.4x6.5mm_Mask2.75x3.43mm_ThermalVias +HTSSOP, 20 Pin (http://www.ti.com/lit/ds/symlink/tlc5971.pdf#page=37&zoom=160,-90,3), generated with kicad-footprint-generator ipc_gullwing_generator.py +HTSSOP SO +0 +42 +21 +Package_SO +HTSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP3.4x6.5mm_Mask2.75x3.43mm_ThermalVias_HandSolder +HTSSOP, 20 Pin (http://www.ti.com/lit/ds/symlink/tlc5971.pdf#page=37&zoom=160,-90,3), generated with kicad-footprint-generator ipc_gullwing_generator.py +HTSSOP SO +0 +42 +21 +Package_SO +HTSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP3.4x6.5mm_Mask2.96x2.96mm +HTSSOP, 20 Pin (https://www.ti.com/lit/ds/symlink/tps2663.pdf#page=49), generated with kicad-footprint-generator ipc_gullwing_generator.py +HTSSOP SO +0 +23 +21 +Package_SO +HTSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP3.4x6.5mm_Mask2.96x2.96mm_ThermalVias +HTSSOP, 20 Pin (https://www.ti.com/lit/ds/symlink/tps2663.pdf#page=49), generated with kicad-footprint-generator ipc_gullwing_generator.py +HTSSOP SO +0 +42 +21 +Package_SO +HTSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP3.4x6.5mm_ThermalVias +20-Lead Plastic Thin Shrink Small Outline (ST)-4.4 mm Body [HTSSOP], with thermal pad with vias +HTSSOP 0.65 +0 +45 +21 +Package_SO +HTSSOP-24-1EP_4.4x7.8mm_P0.65mm_EP3.2x5mm +HTSSOP, 24 Pin (https://www.st.com/resource/en/datasheet/stp16cp05.pdf#page=25), generated with kicad-footprint-generator ipc_gullwing_generator.py +HTSSOP SO +0 +31 +25 +Package_SO +HTSSOP-24-1EP_4.4x7.8mm_P0.65mm_EP3.4x7.8mm_Mask2.4x2.98mm +HTSSOP, 24 Pin (https://www.ti.com/lit/ds/symlink/tlc5949.pdf#page=49), generated with kicad-footprint-generator ipc_gullwing_generator.py +HTSSOP SO +0 +27 +25 +Package_SO +HTSSOP-24-1EP_4.4x7.8mm_P0.65mm_EP3.4x7.8mm_Mask2.4x2.98mm_ThermalVias +HTSSOP, 24 Pin (https://www.ti.com/lit/ds/symlink/tlc5949.pdf#page=49), generated with kicad-footprint-generator ipc_gullwing_generator.py +HTSSOP SO +0 +49 +25 +Package_SO +HTSSOP-24-1EP_4.4x7.8mm_P0.65mm_EP3.4x7.8mm_Mask2.4x4.68mm +HTSSOP, 24 Pin (http://www.ti.com/lit/ds/symlink/tps703.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +HTSSOP SO +0 +28 +25 +Package_SO +HTSSOP-24-1EP_4.4x7.8mm_P0.65mm_EP3.4x7.8mm_Mask2.4x4.68mm_ThermalVias +HTSSOP, 24 Pin (http://www.ti.com/lit/ds/symlink/tps703.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +HTSSOP SO +0 +47 +25 +Package_SO +HTSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.75x6.2mm +HTSSOP, 28 Pin (https://www.trinamic.com/fileadmin/assets/Support/AppNotes/AN005x-IC_Package_PCB_Footprint_Guidelines_HTSSOP28_rev1.00.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +HTSSOP SO +0 +30 +29 +Package_SO +HTSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.75x6.2mm_ThermalVias +HTSSOP, 28 Pin (https://www.trinamic.com/fileadmin/assets/Support/AppNotes/AN005x-IC_Package_PCB_Footprint_Guidelines_HTSSOP28_rev1.00.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +HTSSOP SO +0 +41 +29 +Package_SO +HTSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.85x5.4mm +HTSSOP, 28 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0108.PDF), generated with kicad-footprint-generator ipc_gullwing_generator.py +HTSSOP SO +0 +30 +29 +Package_SO +HTSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.85x5.4mm_ThermalVias +HTSSOP, 28 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0108.PDF), generated with kicad-footprint-generator ipc_gullwing_generator.py +HTSSOP SO +0 +41 +29 +Package_SO +HTSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP3.4x9.5mm +HTSSOP28: plastic thin shrink small outline package; 28 leads; body width 4.4 mm; thermal pad +TSSOP HTSSOP 0.65 thermal pad +0 +39 +29 +Package_SO +HTSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP3.4x9.5mm_Mask2.4x6.17mm +HTSSOP28: plastic thin shrink small outline package; 28 leads; body width 4.4 mm; thermal pad +TSSOP HTSSOP 0.65 thermal pad +0 +40 +29 +Package_SO +HTSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP3.4x9.5mm_Mask2.4x6.17mm_ThermalVias +HTSSOP28: plastic thin shrink small outline package; 28 leads; body width 4.4 mm; thermal pad +TSSOP HTSSOP 0.65 thermal pad +0 +55 +29 +Package_SO +HTSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP3.4x9.5mm_ThermalVias +HTSSOP28: plastic thin shrink small outline package; 28 leads; body width 4.4 mm; thermal pad +TSSOP HTSSOP 0.65 thermal pad +0 +58 +29 +Package_SO +HTSSOP-32-1EP_6.1x11mm_P0.65mm_EP5.2x11mm_Mask4.11x4.36mm +HTSSOP32: plastic thin shrink small outline package; 32 leads; body width 6.1 mm; lead pitch 0.65 mm (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot487-1_po.pdf) +SSOP 0.65 PowerPAD +0 +43 +33 +Package_SO +HTSSOP-32-1EP_6.1x11mm_P0.65mm_EP5.2x11mm_Mask4.11x4.36mm_ThermalVias +HTSSOP32: plastic thin shrink small outline package; 32 leads; body width 6.1 mm; lead pitch 0.65 mm (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot487-1_po.pdf) +SSOP 0.65 PowerPAD +0 +83 +33 +Package_SO +HTSSOP-38-1EP_6.1x12.5mm_P0.65mm_EP5.2x12.5mm_Mask3.39x6.35mm +HTSSOP, 38 Pin (http://www.ti.com/lit/ds/symlink/tlc5951.pdf#page=47&zoom=140,-67,15), generated with kicad-footprint-generator ipc_gullwing_generator.py +HTSSOP SO +0 +46 +39 +Package_SO +HTSSOP-38-1EP_6.1x12.5mm_P0.65mm_EP5.2x12.5mm_Mask3.39x6.35mm_ThermalVias +HTSSOP, 38 Pin (http://www.ti.com/lit/ds/symlink/tlc5951.pdf#page=47&zoom=140,-67,15), generated with kicad-footprint-generator ipc_gullwing_generator.py +HTSSOP SO +0 +87 +39 +Package_SO +HTSSOP-44_6.1x14mm_P0.635mm_TopEP4.14x7.01mm +HTSSOP, 44 Pin (http://www.ti.com/lit/ds/symlink/tpa3251.pdf#page=38), generated with kicad-footprint-generator ipc_gullwing_generator.py +HTSSOP SO +0 +44 +44 +Package_SO +HTSSOP-56-1EP_6.1x14mm_P0.5mm_EP3.61x6.35mm +HTSSOP56: plastic thin shrink small outline package http://www.ti.com/lit/ds/symlink/drv8301.pdf +HTSSOP 0.5 +0 +72 +57 +Package_SO +HVSSOP-8-1EP_3x3mm_P0.65mm_EP1.57x1.89mm +HVSSOP, 8 Pin (https://www.ti.com/lit/ds/symlink/tpa6110a2.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +HVSSOP SO +0 +13 +9 +Package_SO +HVSSOP-8-1EP_3x3mm_P0.65mm_EP1.57x1.89mm_ThermalVias +HVSSOP, 8 Pin (https://www.ti.com/lit/ds/symlink/tpa6110a2.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +HVSSOP SO +0 +18 +9 +Package_SO +HVSSOP-10-1EP_3x3mm_P0.5mm_EP1.57x1.88mm +HVSSOP, 10 Pin (https://www.ti.com/lit/ds/symlink/bq24090.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +HVSSOP SO +0 +15 +11 +Package_SO +HVSSOP-10-1EP_3x3mm_P0.5mm_EP1.57x1.88mm_ThermalVias +HVSSOP, 10 Pin (https://www.ti.com/lit/ds/symlink/bq24090.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +HVSSOP SO +0 +20 +11 +Package_SO +Infineon_PG-DSO-8-27_3.9x4.9mm_EP2.65x3mm +Infineon PG-DSO, 8 Pin (https://www.infineon.com/cms/en/product/packages/PG-DSO/PG-DSO-8-27), generated with kicad-footprint-generator ipc_gullwing_generator.py +Infineon PG-DSO SO +0 +13 +9 +Package_SO +Infineon_PG-DSO-8-27_3.9x4.9mm_EP2.65x3mm_ThermalVias +Infineon PG-DSO, 8 Pin (https://www.infineon.com/cms/en/product/packages/PG-DSO/PG-DSO-8-27), generated with kicad-footprint-generator ipc_gullwing_generator.py +Infineon PG-DSO SO +0 +23 +9 +Package_SO +Infineon_PG-DSO-8-43 +Infineon_PG-DSO-8-43 +DSO DSO-8 SOIC SOIC-8 +0 +12 +9 +Package_SO +Infineon_PG-DSO-12-9 +Infineon PG-DSO 12 pin, exposed pad: 4.5x8.1mm, (https://www.infineon.com/cms/en/product/packages/PG-DSO/PG-DSO-12-9/) +PG-DSO +0 +23 +13 +Package_SO +Infineon_PG-DSO-12-9_ThermalVias +Infineon PG-DSO 12 pin, exposed pad: 4.5x8.1mm, with thermal vias (https://www.infineon.com/cms/en/product/packages/PG-DSO/PG-DSO-12-9/) +PG-DSO +0 +42 +13 +Package_SO +Infineon_PG-DSO-12-11 +Infineon PG-DSO 12 pin, exposed pad: 4.5x8.1mm, (https://www.infineon.com/cms/en/product/packages/PG-DSO/PG-DSO-12-11/) +PG-DSO +0 +23 +13 +Package_SO +Infineon_PG-DSO-12-11_ThermalVias +Infineon PG-DSO 12 pin, exposed pad: 4.5x8.1mm, with thermal vias (https://www.infineon.com/cms/en/product/packages/PG-DSO/PG-DSO-12-11/) +PG-DSO +0 +42 +13 +Package_SO +Infineon_PG-DSO-20-30 +Infineon SO package 20pin, exposed pad 4.5x7mm (https://www.infineon.com/cms/en/product/packages/PG-DSO/PG-DSO-20-71/) +DSO-20 +0 +31 +21 +Package_SO +Infineon_PG-DSO-20-30_ThermalVias +Infineon SO package 20pin, exposed pad 4.5x7mm (https://www.infineon.com/cms/en/product/packages/PG-DSO/PG-DSO-20-71/) +DSO-20 +0 +45 +21 +Package_SO +Infineon_PG-DSO-20-32 +Infineon SO package 20pin without exposed pad (https://www.infineon.com/cms/en/product/packages/PG-DSO/PG-DSO-20-32/) +DSO-20 +0 +20 +20 +Package_SO +Infineon_PG-DSO-20-85 +Infineon SO package 20pin with exposed pad (https://www.infineon.com/cms/en/product/packages/PG-DSO/PG-DSO-20-85/) +DSO-20 +0 +31 +21 +Package_SO +Infineon_PG-DSO-20-85_ThermalVias +Infineon SO package 20pin with exposed pad (https://www.infineon.com/cms/en/product/packages/PG-DSO/PG-DSO-20-85/) +DSO-20 +0 +113 +21 +Package_SO +Infineon_PG-DSO-20-87 +Infineon SO package 20pin without exposed pad (https://www.infineon.com/cms/en/product/packages/PG-DSO/PG-DSO-20-87/) +DSO-20 +0 +20 +20 +Package_SO +Infineon_PG-DSO-20-U03_7.5x12.8mm +Infineon PG-DSO, 20 Pin (https://www.infineon.com/dgdl/Infineon-2ED1323S12P_2ED1324S12P-DataSheet-v01_01-EN.pdf?fileId=8ac78c8c869190210186e92f0f506d0c), generated with kicad-footprint-generator ipc_gullwing_generator.py +Infineon PG-DSO SO +0 +20 +20 +Package_SO +Infineon_PG-TSDSO-14-22 +Infineon_PG-TSDSO-14-22 +Infineon TSDSO 14-22 +0 +17 +15 +Package_SO +Linear_MSOP-12-16-1EP_3x4mm_P0.5mm +12-Lead Plastic Micro Small Outline Package (MS) [MSOP], variant of MSOP-16 (see http://cds.linear.com/docs/en/datasheet/3630fd.pdf) +SSOP 0.5 +0 +15 +13 +Package_SO +Linear_MSOP-12-16_3x4mm_P0.5mm +12-Lead Plastic Micro Small Outline Package (MS) [MSOP], variant of MSOP-16 (see https://www.analog.com/media/en/technical-documentation/data-sheets/3748fb.pdf) +SSOP 0.5 +0 +12 +12 +Package_SO +MFSOP6-4_4.4x3.6mm_P1.27mm +https://toshiba.semicon-storage.com/ap-en/design-support/package/detail.4pin%20MFSOP6.html +MFSOP 4 pin SMD +0 +4 +4 +Package_SO +MFSOP6-5_4.4x3.6mm_P1.27mm +https://toshiba.semicon-storage.com/ap-en/design-support/package/detail.5pin%20MFSOP6.html +MFSOP 4 pin SMD +0 +5 +5 +Package_SO +MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm +MSOP, 8 Pin (https://www.diodes.com/assets/Package-Files/MSOP-8EP.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +MSOP SO +0 +13 +9 +Package_SO +MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm_ThermalVias +MSOP, 8 Pin (https://www.diodes.com/assets/Package-Files/MSOP-8EP.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +MSOP SO +0 +18 +9 +Package_SO +MSOP-8-1EP_3x3mm_P0.65mm_EP1.68x1.88mm +MSOP, 8 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/4440fb.pdf#page=13), generated with kicad-footprint-generator ipc_gullwing_generator.py +MSOP SO +0 +13 +9 +Package_SO +MSOP-8-1EP_3x3mm_P0.65mm_EP1.68x1.88mm_ThermalVias +MSOP, 8 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/4440fb.pdf#page=13), generated with kicad-footprint-generator ipc_gullwing_generator.py +MSOP SO +0 +18 +9 +Package_SO +MSOP-8-1EP_3x3mm_P0.65mm_EP1.73x1.85mm +MSOP, 8 Pin (http://www.ti.com/lit/ds/symlink/lm25085.pdf#page=32), generated with kicad-footprint-generator ipc_gullwing_generator.py +MSOP SO +0 +13 +9 +Package_SO +MSOP-8-1EP_3x3mm_P0.65mm_EP1.73x1.85mm_ThermalVias +MSOP, 8 Pin (http://www.ti.com/lit/ds/symlink/lm25085.pdf#page=32), generated with kicad-footprint-generator ipc_gullwing_generator.py +MSOP SO +0 +18 +9 +Package_SO +MSOP-8-1EP_3x3mm_P0.65mm_EP1.95x2.15mm +MSOP, 8 Pin (http://www.st.com/resource/en/datasheet/pm8834.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +MSOP SO +0 +13 +9 +Package_SO +MSOP-8-1EP_3x3mm_P0.65mm_EP1.95x2.15mm_ThermalVias +MSOP, 8 Pin (http://www.st.com/resource/en/datasheet/pm8834.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +MSOP SO +0 +18 +9 +Package_SO +MSOP-8-1EP_3x3mm_P0.65mm_EP2.5x3mm_Mask1.73x2.36mm +MSOP, 8 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/mic5355_6.pdf#page=15), generated with kicad-footprint-generator ipc_gullwing_generator.py +MSOP SO +0 +14 +9 +Package_SO +MSOP-8-1EP_3x3mm_P0.65mm_EP2.5x3mm_Mask1.73x2.36mm_ThermalVias +MSOP, 8 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/mic5355_6.pdf#page=15), generated with kicad-footprint-generator ipc_gullwing_generator.py +MSOP SO +0 +19 +9 +Package_SO +MSOP-8_3x3mm_P0.65mm +MSOP, 8 Pin (https://www.jedec.org/system/files/docs/mo-187F.pdf variant AA), generated with kicad-footprint-generator ipc_gullwing_generator.py +MSOP SO +0 +8 +8 +Package_SO +MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm +MSOP, 10 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/3805fg.pdf#page=18), generated with kicad-footprint-generator ipc_gullwing_generator.py +MSOP SO +0 +15 +11 +Package_SO +MSOP-10-1EP_3x3mm_P0.5mm_EP1.68x1.88mm_ThermalVias +MSOP, 10 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/3805fg.pdf#page=18), generated with kicad-footprint-generator ipc_gullwing_generator.py +MSOP SO +0 +20 +11 +Package_SO +MSOP-10-1EP_3x3mm_P0.5mm_EP1.73x1.98mm +MSOP, 10 Pin (www.allegromicro.com/~/media/Files/Datasheets/A4952-3-Datasheet.ashx?la=en#page=10), generated with kicad-footprint-generator ipc_gullwing_generator.py +MSOP SO +0 +15 +11 +Package_SO +MSOP-10-1EP_3x3mm_P0.5mm_EP1.73x1.98mm_ThermalVias +MSOP, 10 Pin (www.allegromicro.com/~/media/Files/Datasheets/A4952-3-Datasheet.ashx?la=en#page=10), generated with kicad-footprint-generator ipc_gullwing_generator.py +MSOP SO +0 +20 +11 +Package_SO +MSOP-10-1EP_3x3mm_P0.5mm_EP2.2x3.1mm_Mask1.83x1.89mm +MSOP, 10 Pin (https://www.ti.com/lit/ds/symlink/xtr111.pdf#page=27), generated with kicad-footprint-generator ipc_gullwing_generator.py +MSOP SO +0 +16 +11 +Package_SO +MSOP-10-1EP_3x3mm_P0.5mm_EP2.2x3.1mm_Mask1.83x1.89mm_ThermalVias +MSOP, 10 Pin (https://www.ti.com/lit/ds/symlink/xtr111.pdf#page=27), generated with kicad-footprint-generator ipc_gullwing_generator.py +MSOP SO +0 +23 +11 +Package_SO +MSOP-10_3x3mm_P0.5mm +10-Lead Plastic Micro Small Outline Package (MS) [MSOP] (see Microchip Packaging Specification 00000049BS.pdf) +SSOP 0.5 +0 +10 +10 +Package_SO +MSOP-12-1EP_3x4mm_P0.65mm_EP1.65x2.85mm +MSOP, 12 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/3652fe.pdf#page=24), generated with kicad-footprint-generator ipc_gullwing_generator.py +MSOP SO +0 +17 +13 +Package_SO +MSOP-12-1EP_3x4mm_P0.65mm_EP1.65x2.85mm_ThermalVias +MSOP, 12 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/3652fe.pdf#page=24), generated with kicad-footprint-generator ipc_gullwing_generator.py +MSOP SO +0 +24 +13 +Package_SO +MSOP-12-16-1EP_3x4mm_P0.5mm_EP1.65x2.85mm +10-Lead Plastic Micro Small Outline Package (MS) [MSOP] (see Microchip Packaging Specification 00000049BS.pdf) +SSOP 0.5 +0 +19 +13 +Package_SO +MSOP-12-16-1EP_3x4mm_P0.5mm_EP1.65x2.85mm_ThermalVias +10-Lead Plastic Micro Small Outline Package (MS) [MSOP] (see Microchip Packaging Specification 00000049BS.pdf) +SSOP 0.5 +0 +25 +13 +Package_SO +MSOP-12-16_3x4mm_P0.5mm +10-Lead Plastic Micro Small Outline Package (MS) [MSOP] (see Microchip Packaging Specification 00000049BS.pdf) +SSOP 0.5 +0 +12 +12 +Package_SO +MSOP-12_3x4mm_P0.65mm +MSOP, 12 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/6957fb.pdf#page=36), generated with kicad-footprint-generator ipc_gullwing_generator.py +MSOP SO +0 +12 +12 +Package_SO +MSOP-16-1EP_3x4.039mm_P0.5mm_EP1.651x2.845mm +MSOP, 16 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-msop/05081667_F_MSE16.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +MSOP SO +0 +21 +17 +Package_SO +MSOP-16-1EP_3x4.039mm_P0.5mm_EP1.651x2.845mm_ThermalVias +MSOP, 16 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-msop/05081667_F_MSE16.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +MSOP SO +0 +28 +17 +Package_SO +MSOP-16-1EP_3x4mm_P0.5mm_EP1.65x2.85mm +MSOP, 16 Pin (http://cds.linear.com/docs/en/datasheet/37551fd.pdf#page=23), generated with kicad-footprint-generator ipc_gullwing_generator.py +MSOP SO +0 +21 +17 +Package_SO +MSOP-16-1EP_3x4mm_P0.5mm_EP1.65x2.85mm_ThermalVias +MSOP, 16 Pin (http://cds.linear.com/docs/en/datasheet/37551fd.pdf#page=23), generated with kicad-footprint-generator ipc_gullwing_generator.py +MSOP SO +0 +28 +17 +Package_SO +MSOP-16_3x4.039mm_P0.5mm +MSOP, 16 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-msop/05081669_A_MS16.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +MSOP SO +0 +16 +16 +Package_SO +MSOP-16_3x4mm_P0.5mm +MSOP, 16 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/436412f.pdf#page=22), generated with kicad-footprint-generator ipc_gullwing_generator.py +MSOP SO +0 +16 +16 +Package_SO +ONSemi_SO-8FL_488AA +ON Semi DFN5 5x6mm 1.27P SO-8FL CASE 488A https://www.onsemi.com/pub/Collateral/488AA.PDF +ON Semi DFN5 5x6mm 1.27P SO-8FL CASE 488A +0 +5 +5 +Package_SO +OnSemi_Micro8 +ON Semiconductor Micro8 (Case846A-02): https://www.onsemi.com/pub/Collateral/846A-02.PDF +micro8 +0 +8 +8 +Package_SO +PSOP-44_16.9x27.17mm_P1.27mm +PSOP44: plastic thin shrink small outline package; 44 leads; body width 16.90 mm +PSOP 1.27 +0 +44 +44 +Package_SO +PowerIntegrations_SO-8 +Power-Integrations variant of 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm Body [SOIC], see https://ac-dc.power.com/sites/default/files/product-docs/senzero_family_datasheet.pdf +SOIC 1.27 +0 +8 +8 +Package_SO +PowerIntegrations_SO-8B +Power-Integrations variant of 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm Body [SOIC], see https://www.mouser.com/ds/2/328/linkswitch-pl_family_datasheet-12517.pdf +SOIC 1.27 +0 +7 +7 +Package_SO +PowerIntegrations_SO-8C +Power-Integrations variant of 8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm Body [SOIC], see https://www.mouser.com/ds/2/328/linkswitch-pl_family_datasheet-12517.pdf +SOIC 1.27 +0 +7 +7 +Package_SO +PowerIntegrations_eSOP-12B +eSOP-12B SMT Flat Package with Heatsink Tab, see https://ac-dc.power.com/sites/default/files/product-docs/topswitch-jx_family_datasheet.pdf +Power Integrations K Package +0 +12 +12 +Package_SO +PowerPAK_SO-8L_Single +PowerPAK SO-8L Single (https://www.vishay.com/docs/64721/an913.pdf) +PowerPAK SO-8L_Single +0 +13 +5 +Package_SO +PowerPAK_SO-8_Dual +PowerPAK SO-8 Dual (https://www.vishay.com/docs/71655/powerpak.pdf, https://www.vishay.com/docs/72600/72600.pdf) +PowerPAK SO-8 Dual +0 +10 +6 +Package_SO +PowerPAK_SO-8_Single +PowerPAK SO-8 Single (https://www.vishay.com/docs/71655/powerpak.pdf, https://www.vishay.com/docs/72599/72599.pdf) +PowerPAK SO-8 Single +0 +9 +5 +Package_SO +QSOP-16_3.9x4.9mm_P0.635mm +16-Lead Plastic Shrink Small Outline Narrow Body (QR)-.150" Body [QSOP] (see Microchip Packaging Specification 00000049BS.pdf) +SSOP 0.635 +0 +16 +16 +Package_SO +QSOP-20_3.9x8.7mm_P0.635mm +20-Lead Plastic Shrink Small Outline Narrow Body (http://www.analog.com/media/en/technical-documentation/data-sheets/ADuM7640_7641_7642_7643.pdf) +QSOP 0.635 +0 +20 +20 +Package_SO +QSOP-24_3.9x8.7mm_P0.635mm +24-Lead Plastic Shrink Small Outline Narrow Body (QR)-.150" Body [QSOP] (see Microchip Packaging Specification 00000049CH.pdf) +QSOP 0.635 +0 +24 +24 +Package_SO +ROHM_SOT-457_ClockwisePinNumbering +ROHM SOT-457 SC-74, 6 Pin (https://fscdn.rohm.com/en/products/databook/datasheet/discrete/transistor/digital/imh3at110-e.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +ROHM SC-74 SO +0 +6 +6 +Package_SO +SC-74-6_1.5x2.9mm_P0.95mm +SC-74, 6 Pin (https://www.nxp.com/docs/en/package-information/SOT457.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +SC-74 SO +0 +6 +6 +Package_SO +SO-4_4.4x2.3mm_P1.27mm +4-Lead Plastic Small Outline (SO), see http://datasheet.octopart.com/OPIA403BTRE-Optek-datasheet-5328560.pdf +SO SOIC 1.27 +0 +4 +4 +Package_SO +SO-4_4.4x3.6mm_P2.54mm +4-Lead Plastic Small Outline (SO), see https://www.elpro.org/de/index.php?controller=attachment&id_attachment=339 +SO SOIC 2.54 +0 +4 +4 +Package_SO +SO-4_4.4x3.9mm_P2.54mm +SO, 4 Pin (https://toshiba.semicon-storage.com/info/docget.jsp?did=10047&prodName=TLP3123), generated with kicad-footprint-generator ipc_gullwing_generator.py +SO SO +0 +4 +4 +Package_SO +SO-4_4.4x4.3mm_P2.54mm +4-Lead Plastic Small Outline (SO), see https://docs.broadcom.com/docs/AV02-0173EN +SO SOIC 2.54 +0 +4 +4 +Package_SO +SO-4_7.6x3.6mm_P2.54mm +4-Lead Plastic Small Outline (SO) (http://www.everlight.com/file/ProductFile/201407061745083848.pdf) +SO SOIC 2.54 +0 +4 +4 +Package_SO +SO-5_4.4x3.6mm_P1.27mm +5-Lead Plastic Small Outline (SO), see https://docs.broadcom.com/cs/Satellite?blobcol=urldata&blobheader=application%2Fpdf&blobheadername1=Content-Disposition&blobheadername2=Content-Type&blobheadername3=MDT-Type&blobheadervalue1=attachment%3Bfilename%3DIPD-Selection-Guide_AV00-0254EN_030617.pdf&blobheadervalue2=application%2Fx-download&blobheadervalue3=abinary%253B%2Bcharset%253DUTF-8&blobkey=id&blobnocache=true&blobtable=MungoBlobs&blobwhere=1430884105675&ssbinary=true +SO SOIC 1.27 +0 +5 +5 +Package_SO +SO-6L_10x3.84mm_P1.27mm +6-pin plasic small outline 7,5mm long https://toshiba.semicon-storage.com/info/docget.jsp?did=53548&prodName=TLP2770 +SO-6L +0 +6 +6 +Package_SO +SO-6_4.4x3.6mm_P1.27mm +6-Lead Plastic Small Outline (SO), see https://docs.broadcom.com/cs/Satellite?blobcol=urldata&blobheader=application%2Fpdf&blobheadername1=Content-Disposition&blobheadername2=Content-Type&blobheadername3=MDT-Type&blobheadervalue1=attachment%3Bfilename%3DIPD-Selection-Guide_AV00-0254EN_030617.pdf&blobheadervalue2=application%2Fx-download&blobheadervalue3=abinary%253B%2Bcharset%253DUTF-8&blobkey=id&blobnocache=true&blobtable=MungoBlobs&blobwhere=1430884105675&ssbinary=true +SO SOIC 1.27 +0 +6 +6 +Package_SO +SO-8_3.9x4.9mm_P1.27mm +SO, 8 Pin (https://www.nxp.com/docs/en/data-sheet/PCF8523.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +SO SO +0 +8 +8 +Package_SO +SO-8_5.3x6.2mm_P1.27mm +SO, 8 Pin (https://www.ti.com/lit/ml/msop001a/msop001a.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +SO SO +0 +8 +8 +Package_SO +SO-14_3.9x8.65mm_P1.27mm +SO, 14 Pin (https://www.st.com/resource/en/datasheet/l6491.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +SO SO +0 +14 +14 +Package_SO +SO-14_5.3x10.2mm_P1.27mm +SO, 14 Pin (https://www.ti.com/lit/ml/msop002a/msop002a.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +SO SO +0 +14 +14 +Package_SO +SO-16_3.9x9.9mm_P1.27mm +SO, 16 Pin (https://www.nxp.com/docs/en/package-information/SOT109-1.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +SO SO +0 +16 +16 +Package_SO +SO-16_5.3x10.2mm_P1.27mm +SO, 16 Pin (https://www.ti.com/lit/ml/msop002a/msop002a.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +SO SO +0 +16 +16 +Package_SO +SO-20-1EP_7.52x12.825mm_P1.27mm_EP6.045x12.09mm_Mask3.56x4.47mm +SO, 20 Pin (http://www.ti.com/lit/ds/symlink/opa569.pdf, http://www.ti.com/lit/an/slma004b/slma004b.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +SO SO +0 +23 +21 +Package_SO +SO-20-1EP_7.52x12.825mm_P1.27mm_EP6.045x12.09mm_Mask3.56x4.47mm_ThermalVias +SO, 20 Pin (http://www.ti.com/lit/ds/symlink/opa569.pdf, http://www.ti.com/lit/an/slma004b/slma004b.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +SO SO +0 +51 +21 +Package_SO +SO-20_5.3x12.6mm_P1.27mm +SO, 20 Pin (https://www.ti.com/lit/ml/msop002a/msop002a.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +SO SO +0 +20 +20 +Package_SO +SO-20_12.8x7.5mm_P1.27mm +SO-20, 12.8x7.5mm, https://www.nxp.com/docs/en/data-sheet/SA605.pdf +S0-20 +0 +20 +20 +Package_SO +SO-24_5.3x15mm_P1.27mm +SO, 24 Pin (https://www.ti.com/lit/ml/msop002a/msop002a.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +SO SO +0 +24 +24 +Package_SO +SOIC-4_4.55x2.6mm_P1.27mm +SOIC, 4 Pin (https://toshiba.semicon-storage.com/info/docget.jsp?did=12884&prodName=TLP291), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOIC SO +0 +4 +4 +Package_SO +SOIC-4_4.55x3.7mm_P2.54mm +SOIC, 6 Pin (https://toshiba.semicon-storage.com/info/docget.jsp?did=11791&prodName=TLP185), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOIC SO +0 +4 +4 +Package_SO +SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm +SOIC, 8 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/ada4898-1_4898-2.pdf#page=29), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOIC SO +0 +13 +9 +Package_SO +SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm_ThermalVias +SOIC, 8 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/ada4898-1_4898-2.pdf#page=29), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOIC SO +0 +20 +9 +Package_SO +SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm +SOIC, 8 Pin (http://www.allegromicro.com/~/media/Files/Datasheets/A4950-Datasheet.ashx#page=8), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOIC SO +0 +13 +9 +Package_SO +SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.3mm_ThermalVias +SOIC, 8 Pin (http://www.allegromicro.com/~/media/Files/Datasheets/A4950-Datasheet.ashx#page=8), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOIC SO +0 +20 +9 +Package_SO +SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.81mm +SOIC, 8 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/ada4898-1_4898-2.pdf#page=29), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOIC SO +0 +13 +9 +Package_SO +SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.41x3.81mm_ThermalVias +SOIC, 8 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/ada4898-1_4898-2.pdf#page=29), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOIC SO +0 +20 +9 +Package_SO +SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.62x3.51mm +SOIC, 8 Pin (https://www.monolithicpower.com/en/documentview/productdocument/index/version/2/document_type/Datasheet/lang/en/sku/MP2303A/document_id/494#page=14), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOIC SO +0 +13 +9 +Package_SO +SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.62x3.51mm_ThermalVias +SOIC, 8 Pin (https://www.monolithicpower.com/en/documentview/productdocument/index/version/2/document_type/Datasheet/lang/en/sku/MP2303A/document_id/494#page=14), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOIC SO +0 +20 +9 +Package_SO +SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.71x3.4mm +SOIC, 8 Pin (http://www.ti.com/lit/ds/symlink/lm5017.pdf#page=31), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOIC SO +0 +14 +9 +Package_SO +SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.71x3.4mm_ThermalVias +SOIC, 8 Pin (http://www.ti.com/lit/ds/symlink/lm5017.pdf#page=31), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOIC SO +0 +23 +9 +Package_SO +SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.514x3.2mm +SOIC, 8 Pin (https://www.renesas.com/eu/en/www/doc/datasheet/hip2100.pdf#page=13), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOIC SO +0 +13 +9 +Package_SO +SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.514x3.2mm_ThermalVias +SOIC, 8 Pin (https://www.renesas.com/eu/en/www/doc/datasheet/hip2100.pdf#page=13), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOIC SO +0 +20 +9 +Package_SO +SOIC-8-N7_3.9x4.9mm_P1.27mm +8-Lead Plastic Small Outline (SN) - Narrow, 3.90 mm Body [SOIC], pin 7 removed (Microchip Packaging Specification 00000049BS.pdf, http://www.onsemi.com/pub/Collateral/NCP1207B.PDF) +SOIC 1.27 +0 +7 +7 +Package_SO +SOIC-8W_5.3x5.3mm_P1.27mm +8-Lead Plastic Small Outline (SM) - 5.28 mm Body [SOIC] (http://ww1.microchip.com/downloads/en/PackagingSpec/00000049BQ.pdf) +SOIC 1.27 +0 +8 +8 +Package_SO +SOIC-8_3.9x4.9mm_P1.27mm +SOIC, 8 Pin (JEDEC MS-012AA, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/soic_narrow-r/r_8.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOIC SO +0 +8 +8 +Package_SO +SOIC-8_5.23x5.23mm_P1.27mm +SOIC, 8 Pin (http://www.winbond.com/resource-files/w25q32jv%20revg%2003272018%20plus.pdf#page=68), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOIC SO +0 +8 +8 +Package_SO +SOIC-8_5.275x5.275mm_P1.27mm +SOIC, 8 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/20005045C.pdf#page=23), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOIC SO +0 +8 +8 +Package_SO +SOIC-8_7.5x5.85mm_P1.27mm +SOIC, 8 Pin (http://www.ti.com/lit/ml/mpds382b/mpds382b.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOIC SO +0 +8 +8 +Package_SO +SOIC-14-16_3.9x9.9mm_P1.27mm +SOIC, 16 Pin package with pin 2 and 13 removed for voltage clearance (UCC256301, https://www.ti.com/lit/ds/symlink/ucc256301.pdf) +SOIC SO +0 +14 +14 +Package_SO +SOIC-14W_7.5x9mm_P1.27mm +SOIC, 14 Pin (JEDEC MS-013AF, https://www.analog.com/media/en/package-pcb-resources/package/54614177245586rw_14.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOIC SO +0 +14 +14 +Package_SO +SOIC-14_3.9x8.7mm_P1.27mm +SOIC, 14 Pin (JEDEC MS-012AB, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/soic_narrow-r/r_14.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOIC SO +0 +14 +14 +Package_SO +SOIC-16W-12_7.5x10.3mm_P1.27mm +SOIC-16 With 12 Pin Placed - Wide, 7.50 mm Body [SOIC] (https://docs.broadcom.com/docs/AV02-0169EN) +SOIC 1.27 16 12 Wide +0 +12 +12 +Package_SO +SOIC-16W_5.3x10.2mm_P1.27mm +16-Lead Plastic Small Outline (SO) - Wide, 5.3 mm Body (http://www.ti.com/lit/ml/msop002a/msop002a.pdf) +SOIC 1.27 +0 +16 +16 +Package_SO +SOIC-16W_7.5x10.3mm_P1.27mm +SOIC, 16 Pin (JEDEC MS-013AA, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/soic_wide-rw/rw_16.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOIC SO +0 +16 +16 +Package_SO +SOIC-16W_7.5x12.8mm_P1.27mm +SOIC, 16 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ri_soic_ic/ri_16_1.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOIC SO +0 +16 +16 +Package_SO +SOIC-16_3.9x9.9mm_P1.27mm +SOIC, 16 Pin (JEDEC MS-012AC, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/soic_narrow-r/r_16.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOIC SO +0 +16 +16 +Package_SO +SOIC-16_4.55x10.3mm_P1.27mm +SOIC, 16 Pin (https://toshiba.semicon-storage.com/info/docget.jsp?did=12858&prodName=TLP291-4), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOIC SO +0 +16 +16 +Package_SO +SOIC-18W_7.5x11.6mm_P1.27mm +SOIC, 18 Pin (JEDEC MS-013AB, https://www.analog.com/media/en/package-pcb-resources/package/33254132129439rw_18.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOIC SO +0 +18 +18 +Package_SO +SOIC-20W_7.5x12.8mm_P1.27mm +SOIC, 20 Pin (JEDEC MS-013AC, https://www.analog.com/media/en/package-pcb-resources/package/233848rw_20.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOIC SO +0 +20 +20 +Package_SO +SOIC-20W_7.5x15.4mm_P1.27mm +SOIC, 20 Pin (JEDEC MS-013AD, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/soic_wide-rw/RI_20_1.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOIC SO +0 +20 +20 +Package_SO +SOIC-24W_7.5x15.4mm_P1.27mm +SOIC, 24 Pin (JEDEC MS-013AD, https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/soic_wide-rw/RW_24.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOIC SO +0 +24 +24 +Package_SO +SOIC-28W_7.5x17.9mm_P1.27mm +SOIC, 28 Pin (JEDEC MS-013AE, https://www.analog.com/media/en/package-pcb-resources/package/35833120341221rw_28.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOIC SO +0 +28 +28 +Package_SO +SOIC-28W_7.5x18.7mm_P1.27mm +SOIC, 28 Pin (https://www.akm.com/akm/en/file/datasheet/AK5394AVS.pdf#page=23), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOIC SO +0 +28 +28 +Package_SO +SOJ-36_10.16x23.49mm_P1.27mm +SOJ, 36 Pin (http://www.issi.com/WW/pdf/61-64C5128AL.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOJ SO +0 +36 +36 +Package_SO +SOP-4_3.8x4.1mm_P2.54mm +SOP, 4 Pin (http://www.ixysic.com/home/pdfs.nsf/www/CPC1017N.pdf/$file/CPC1017N.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOP SO +0 +4 +4 +Package_SO +SOP-4_4.4x2.6mm_P1.27mm +SOP, 4 Pin (http://www.vishay.com/docs/83510/tcmt1100.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOP SO +0 +4 +4 +Package_SO +SOP-8-1EP_4.57x4.57mm_P1.27mm_EP4.57x4.45mm +SOP, 8 Pin (https://ww2.minicircuits.com/case_style/XX112.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOP SO +0 +13 +9 +Package_SO +SOP-8-1EP_4.57x4.57mm_P1.27mm_EP4.57x4.45mm_ThermalVias +SOP, 8 Pin (https://ww2.minicircuits.com/case_style/XX112.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOP SO +0 +20 +9 +Package_SO +SOP-8_3.9x4.9mm_P1.27mm +SOP, 8 Pin (http://www.macronix.com/Lists/Datasheet/Attachments/7534/MX25R3235F,%20Wide%20Range,%2032Mb,%20v1.6.pdf#page=79), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOP SO +0 +8 +8 +Package_SO +SOP-8_3.76x4.96mm_P1.27mm +SOP, 8 Pin (https://ww2.minicircuits.com/case_style/XX211.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOP SO +0 +8 +8 +Package_SO +SOP-8_5.28x5.23mm_P1.27mm +SOP, 8 Pin (http://www.macronix.com/Lists/Datasheet/Attachments/7534/MX25R3235F,%20Wide%20Range,%2032Mb,%20v1.6.pdf#page=80), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOP SO +0 +8 +8 +Package_SO +SOP-8_6.62x9.15mm_P2.54mm +SOP, 8 Pin (http://www.ti.com/lit/ds/symlink/iso1050.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOP SO +0 +8 +8 +Package_SO +SOP-8_6.605x9.655mm_P2.54mm +SOP, 8 Pin (https://www.onsemi.com/pdf/datasheet/hcpl2631m-d.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOP SO +0 +8 +8 +Package_SO +SOP-16_3.9x9.9mm_P1.27mm +SOP, 16 Pin (https://www.diodes.com/assets/Datasheets/PAM8403.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOP SO +0 +16 +16 +Package_SO +SOP-16_4.4x10.4mm_P1.27mm +SOP, 16 Pin (https://www.vishay.com/docs/83513/tcmd1000.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOP SO +0 +16 +16 +Package_SO +SOP-16_4.55x10.3mm_P1.27mm +SOP, 16 Pin (https://toshiba.semicon-storage.com/info/docget.jsp?did=12855&prodName=TLP290-4), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOP SO +0 +16 +16 +Package_SO +SOP-18_7.495x11.515mm_P1.27mm +SOP, 18 Pin (https://toshiba.semicon-storage.com/info/docget.jsp?did=30523), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOP SO +0 +18 +18 +Package_SO +SOP-18_7x12.5mm_P1.27mm +SOP, 18 Pin (https://toshiba.semicon-storage.com/info/docget.jsp?did=30523), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOP SO +0 +18 +18 +Package_SO +SOP-20_7.5x12.8mm_P1.27mm +SOP, 20 Pin (https://www.holtek.com/documents/10179/116723/sop20-300.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOP SO +0 +20 +20 +Package_SO +SOP-24_7.5x15.4mm_P1.27mm +SOP, 24 Pin (http://www.issi.com/WW/pdf/31FL3218.pdf#page=14), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOP SO +0 +24 +24 +Package_SO +SOP-44_12.6x28.5mm_P1.27mm +SOP, 44 Pin (https://www.mxic.com.tw/Lists/Datasheet/Attachments/8177/MX23C6410,%205V,%2064Mb,%20v3.1.pdf#page=5), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOP SO +0 +44 +44 +Package_SO +SSO-4_6.7x5.1mm_P2.54mm_Clearance8mm +4-Lead Plastic Stretched Small Outline (SSO/Stretched SO), see https://www.vishay.com/docs/84299/vor1142b4.pdf +SSO Stretched SO SOIC 2.54 +0 +4 +4 +Package_SO +SSO-6_6.8x4.6mm_P1.27mm_Clearance7mm +8-Lead Plastic Stretched Small Outline (SSO/Stretched SO), see https://docs.broadcom.com/cs/Satellite?blobcol=urldata&blobheader=application%2Fpdf&blobheadername1=Content-Disposition&blobheadername2=Content-Type&blobheadername3=MDT-Type&blobheadervalue1=attachment%3Bfilename%3DIPD-Selection-Guide_AV00-0254EN_030617.pdf&blobheadervalue2=application%2Fx-download&blobheadervalue3=abinary%253B%2Bcharset%253DUTF-8&blobkey=id&blobnocache=true&blobtable=MungoBlobs&blobwhere=1430884105675&ssbinary=true +SSO Stretched SO SOIC 1.27 +0 +6 +6 +Package_SO +SSO-6_6.8x4.6mm_P1.27mm_Clearance8mm +8-Lead Plastic Stretched Small Outline (SSO/Stretched SO), see https://docs.broadcom.com/cs/Satellite?blobcol=urldata&blobheader=application%2Fpdf&blobheadername1=Content-Disposition&blobheadername2=Content-Type&blobheadername3=MDT-Type&blobheadervalue1=attachment%3Bfilename%3DIPD-Selection-Guide_AV00-0254EN_030617.pdf&blobheadervalue2=application%2Fx-download&blobheadervalue3=abinary%253B%2Bcharset%253DUTF-8&blobkey=id&blobnocache=true&blobtable=MungoBlobs&blobwhere=1430884105675&ssbinary=true +SSO Stretched SO SOIC 1.27 +0 +6 +6 +Package_SO +SSO-7-8_6.4x9.78mm_P2.54mm +SSO, 7 Pin (https://b2b-api.panasonic.eu/file_stream/pids/fileversion/2787), generated with kicad-footprint-generator ipc_gullwing_generator.py +SSO SO +0 +7 +7 +Package_SO +SSO-8_6.7x9.8mm_P2.54mm_Clearance8mm +8-Lead Plastic Stretched Small Outline (SSO/Stretched SO), see https://www.vishay.com/docs/83831/lh1533ab.pdf +SSO Stretched SO SOIC Pitch 2.54 +0 +8 +8 +Package_SO +SSO-8_6.8x5.9mm_P1.27mm_Clearance7mm +8-Lead Plastic Stretched Small Outline (SSO/Stretched SO), see https://docs.broadcom.com/cs/Satellite?blobcol=urldata&blobheader=application%2Fpdf&blobheadername1=Content-Disposition&blobheadername2=Content-Type&blobheadername3=MDT-Type&blobheadervalue1=attachment%3Bfilename%3DIPD-Selection-Guide_AV00-0254EN_030617.pdf&blobheadervalue2=application%2Fx-download&blobheadervalue3=abinary%253B%2Bcharset%253DUTF-8&blobkey=id&blobnocache=true&blobtable=MungoBlobs&blobwhere=1430884105675&ssbinary=true +SSO Stretched SO SOIC Pitch 1.27 +0 +8 +8 +Package_SO +SSO-8_6.8x5.9mm_P1.27mm_Clearance8mm +8-Lead Plastic Stretched Small Outline (SSO/Stretched SO), see https://docs.broadcom.com/cs/Satellite?blobcol=urldata&blobheader=application%2Fpdf&blobheadername1=Content-Disposition&blobheadername2=Content-Type&blobheadername3=MDT-Type&blobheadervalue1=attachment%3Bfilename%3DIPD-Selection-Guide_AV00-0254EN_030617.pdf&blobheadervalue2=application%2Fx-download&blobheadervalue3=abinary%253B%2Bcharset%253DUTF-8&blobkey=id&blobnocache=true&blobtable=MungoBlobs&blobwhere=1430884105675&ssbinary=true +SSO Stretched SO SOIC Pitch 1.27 +0 +8 +8 +Package_SO +SSO-8_9.6x6.3mm_P1.27mm_Clearance10.5mm +8-Lead Plastic Stretched Small Outline (SSO/Stretched SO), see https://docs.broadcom.com/cs/Satellite?blobcol=urldata&blobheader=application%2Fpdf&blobheadername1=Content-Disposition&blobheadername2=Content-Type&blobheadername3=MDT-Type&blobheadervalue1=attachment%3Bfilename%3DIPD-Selection-Guide_AV00-0254EN_030617.pdf&blobheadervalue2=application%2Fx-download&blobheadervalue3=abinary%253B%2Bcharset%253DUTF-8&blobkey=id&blobnocache=true&blobtable=MungoBlobs&blobwhere=1430884105675&ssbinary=true +SSO Stretched SO SOIC Pitch 1.27 +0 +8 +8 +Package_SO +SSO-8_13.6x6.3mm_P1.27mm_Clearance14.2mm +8-Lead Plastic Stretched Small Outline (SSO/Stretched SO), see https://docs.broadcom.com/cs/Satellite?blobcol=urldata&blobheader=application%2Fpdf&blobheadername1=Content-Disposition&blobheadername2=Content-Type&blobheadername3=MDT-Type&blobheadervalue1=attachment%3Bfilename%3DIPD-Selection-Guide_AV00-0254EN_030617.pdf&blobheadervalue2=application%2Fx-download&blobheadervalue3=abinary%253B%2Bcharset%253DUTF-8&blobkey=id&blobnocache=true&blobtable=MungoBlobs&blobwhere=1430884105675&ssbinary=true +SSO Stretched SO SOIC Pitch 1.27 +0 +8 +8 +Package_SO +SSOP-8_2.95x2.8mm_P0.65mm +SSOP-8 2.9 x2.8mm Pitch 0.65mm +SSOP-8 2.95x2.8mm Pitch 0.65mm +0 +8 +8 +Package_SO +SSOP-8_3.9x5.05mm_P1.27mm +SSOP, 8 Pin (http://www.fujitsu.com/downloads/MICRO/fsa/pdf/products/memory/fram/MB85RS16-DS501-00014-6v0-E.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +SSOP SO +0 +8 +8 +Package_SO +SSOP-8_3.95x5.21x3.27mm_P1.27mm +SSOP-8 3.95x5.21x3.27mm Pitch 1.27mm +SSOP-8 3.95x5.21x3.27mm 1.27mm +0 +8 +8 +Package_SO +SSOP-8_5.25x5.24mm_P1.27mm +SSOP, 8 Pin (http://www.fujitsu.com/ca/en/Images/MB85RS2MT-DS501-00023-1v0-E.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +SSOP SO +0 +8 +8 +Package_SO +SSOP-10_3.9x4.9mm_P1.00mm +10-Lead SSOP, 3.9 x 4.9mm body, 1.00mm pitch (http://www.st.com/resource/en/datasheet/viper01.pdf) +SSOP 3.9 4.9 1.00 +0 +10 +10 +Package_SO +SSOP-14_5.3x6.2mm_P0.65mm +SSOP14: plastic shrink small outline package; 14 leads; body width 5.3 mm; (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot337-1_po.pdf) +SSOP 0.65 +0 +14 +14 +Package_SO +SSOP-16_3.9x4.9mm_P0.635mm +SSOP16: plastic shrink small outline package; 16 leads; body width 3.9 mm; lead pitch 0.635; (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot519-1_po.pdf) +SSOP 0.635 +0 +16 +16 +Package_SO +SSOP-16_4.4x5.2mm_P0.65mm +SSOP16: plastic shrink small outline package; 16 leads; body width 4.4 mm; (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot369-1_po.pdf) +SSOP 0.65 +0 +16 +16 +Package_SO +SSOP-16_5.3x6.2mm_P0.65mm +SSOP, 16 Pin (https://assets.nexperia.com/documents/data-sheet/74HC_HCT165.pdf#page=14), generated with kicad-footprint-generator ipc_gullwing_generator.py +SSOP SO +0 +16 +16 +Package_SO +SSOP-18_4.4x6.5mm_P0.65mm +SSOP18: plastic shrink small outline package; 18 leads; body width 4.4 mm (http://toshiba.semicon-storage.com/info/docget.jsp?did=30523&prodName=TBD62783APG) +SSOP 0.65 +0 +18 +18 +Package_SO +SSOP-20_3.9x8.7mm_P0.635mm +SSOP20: plastic shrink small outline package; 24 leads; body width 3.9 mm; lead pitch 0.635; (see http://www.ftdichip.com/Support/Documents/DataSheets/ICs/DS_FT231X.pdf) +SSOP 0.635 +0 +20 +20 +Package_SO +SSOP-20_4.4x6.5mm_P0.65mm +SSOP20: plastic shrink small outline package; 20 leads; body width 4.4 mm; (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot266-1_po.pdf) +SSOP 0.65 +0 +20 +20 +Package_SO +SSOP-20_5.3x7.2mm_P0.65mm +SSOP, 20 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/40001800C.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +SSOP SO +0 +20 +20 +Package_SO +SSOP-24_3.9x8.7mm_P0.635mm +SSOP24: plastic shrink small outline package; 24 leads; body width 3.9 mm; lead pitch 0.635; (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot556-1_po.pdf) +SSOP 0.635 +0 +24 +24 +Package_SO +SSOP-24_5.3x8.2mm_P0.65mm +24-Lead Plastic Shrink Small Outline (SS)-5.30 mm Body [SSOP] (see Microchip Packaging Specification 00000049BS.pdf) +SSOP 0.65 +0 +24 +24 +Package_SO +SSOP-28_3.9x9.9mm_P0.635mm +SSOP28: plastic shrink small outline package; 28 leads; body width 3.9 mm; lead pitch 0.635; (see http://cds.linear.com/docs/en/datasheet/38901fb.pdf) +SSOP 0.635 +0 +28 +28 +Package_SO +SSOP-28_5.3x10.2mm_P0.65mm +28-Lead Plastic Shrink Small Outline (SS)-5.30 mm Body [SSOP] (see Microchip Packaging Specification 00000049BS.pdf) +SSOP 0.65 +0 +28 +28 +Package_SO +SSOP-32_11.305x20.495mm_P1.27mm +SSOP, 32 Pin (http://www.issi.com/WW/pdf/61-64C5128AL.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +SSOP SO +0 +32 +32 +Package_SO +SSOP-44_5.3x12.8mm_P0.5mm +44-Lead Plastic Shrink Small Outline (SS)-5.30 mm Body [SSOP] (http://cds.linear.com/docs/en/datasheet/680313fa.pdf) +SSOP 0.5 +0 +44 +44 +Package_SO +SSOP-48_5.3x12.8mm_P0.5mm +SSOP, 48 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-ssop/05081887_A_G48.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +SSOP SO +0 +48 +48 +Package_SO +SSOP-48_7.5x15.9mm_P0.635mm +SSOP48: plastic shrink small outline package; 48 leads; body width 7.5 mm; (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot370-1_po.pdf) +SSOP 0.635 +0 +48 +48 +Package_SO +SSOP-56_7.5x18.5mm_P0.635mm +SSOP56: plastic shrink small outline package; 56 leads; body width 7.5 mm; (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot371-1_po.pdf) +SSOP 0.635 +0 +56 +56 +Package_SO +STC_SOP-16_3.9x9.9mm_P1.27mm +STC SOP, 16 Pin (https://www.stcmicro.com/datasheet/STC15F2K60S2-en.pdf#page=156), generated with kicad-footprint-generator ipc_gullwing_generator.py +STC SOP SO +0 +16 +16 +Package_SO +ST_MultiPowerSO-30 +MultiPowerSO-30 3EP 16.0x17.2mm Pitch 1mm (http://www.st.com/resource/en/datasheet/vnh2sp30-e.pdf) +MultiPowerSO-30 3EP 16.0x17.2mm Pitch 1mm +0 +33 +33 +Package_SO +ST_PowerSSO-24_SlugDown +ST PowerSSO-24 1EP 7.5x10.3mm Pitch 0.8mm [JEDEC MO-271] (http://www.st.com/resource/en/datasheet/tda7266p.pdf, http://freedatasheets.com/downloads/Technical%20Note%20Powersso24%20TN0054.pdf) +ST PowerSSO-24 1EP 7.5x10.3mm Pitch 0.8mm +0 +25 +25 +Package_SO +ST_PowerSSO-24_SlugDown_ThermalVias +ST PowerSSO-24 1EP 7.5x10.3mm Pitch 0.8mm [JEDEC MO-271] (http://www.st.com/resource/en/datasheet/tda7266p.pdf, http://freedatasheets.com/downloads/Technical%20Note%20Powersso24%20TN0054.pdf) +ST PowerSSO-24 1EP 7.5x10.3mm Pitch 0.8mm +0 +38 +25 +Package_SO +ST_PowerSSO-24_SlugUp +ST PowerSSO-24 1EP 7.5x10.3mm Pitch 0.8mm [JEDEC MO-271] (http://www.st.com/resource/en/datasheet/tda7266p.pdf, http://freedatasheets.com/downloads/Technical%20Note%20Powersso24%20TN0054.pdf) +ST PowerSSO-24 1EP 7.5x10.3mm Pitch 0.8mm +0 +24 +24 +Package_SO +ST_PowerSSO-36_SlugDown +ST PowerSSO-36 1EP 7.5x10.3mm Pitch 0.8mm [JEDEC MO-271] (http://www.st.com/resource/en/datasheet/tda7492p.pdf, http://freedatasheets.com/downloads/Technical%20Note%20Powersso24%20TN0054.pdf) +ST PowerSSO-36 1EP 7.5x10.3mm Pitch 0.8mm +0 +37 +37 +Package_SO +ST_PowerSSO-36_SlugDown_ThermalVias +ST PowerSSO-36 1EP 7.5x10.3mm Pitch 0.8mm [JEDEC MO-271] (http://www.st.com/resource/en/datasheet/tda7492p.pdf, http://freedatasheets.com/downloads/Technical%20Note%20Powersso24%20TN0054.pdf) +ST PowerSSO-36 1EP 7.5x10.3mm Pitch 0.8mm +0 +50 +37 +Package_SO +ST_PowerSSO-36_SlugUp +ST PowerSSO-36 1EP 7.5x10.3mm Pitch 0.8mm [JEDEC MO-271] (http://www.st.com/resource/en/datasheet/tda7492p.pdf, http://freedatasheets.com/downloads/Technical%20Note%20Powersso24%20TN0054.pdf) +ST PowerSSO-36 1EP 7.5x10.3mm Pitch 0.8mm +0 +36 +36 +Package_SO +TI_SO-PowerPAD-8 +8-Lead Plastic PSOP, Exposed Die Pad (TI DDA0008B, see http://www.ti.com/lit/ds/symlink/lm3404.pdf) +SSOP 0.50 exposed pad +0 +12 +9 +Package_SO +TI_SO-PowerPAD-8_ThermalVias +8-pin HTSOP package with 1.27mm pin pitch, compatible with SOIC-8, 3.9x4.9mm² body, exposed pad, thermal vias with large copper area, as proposed in http://www.ti.com/lit/ds/symlink/tps5430.pdf +HTSOP 1.27 +0 +19 +9 +Package_SO +TSOP-5_1.65x3.05mm_P0.95mm +TSOP-5 package (comparable to TSOT-23), https://www.vishay.com/docs/71200/71200.pdf +Jedec MO-193C TSOP-5L +0 +5 +5 +Package_SO +TSOP-6_1.65x3.05mm_P0.95mm +TSOP-6 package (comparable to TSOT-23), https://www.vishay.com/docs/71200/71200.pdf +Jedec MO-193C TSOP-6L +0 +6 +6 +Package_SO +TSOP-I-24_12.4x6mm_P0.5mm +TSOP-I, 24 Pin (https://www.jedec.org/standards-documents/docs/mo-142-d variation AA), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSOP-I SO +0 +24 +24 +Package_SO +TSOP-I-24_14.4x6mm_P0.5mm +TSOP-I, 24 Pin (https://www.jedec.org/standards-documents/docs/mo-142-d variation AB), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSOP-I SO +0 +24 +24 +Package_SO +TSOP-I-24_16.4x6mm_P0.5mm +TSOP-I, 24 Pin (https://www.jedec.org/standards-documents/docs/mo-142-d variation AC), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSOP-I SO +0 +24 +24 +Package_SO +TSOP-I-24_18.4x6mm_P0.5mm +TSOP-I, 24 Pin (https://www.jedec.org/standards-documents/docs/mo-142-d variation AD), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSOP-I SO +0 +24 +24 +Package_SO +TSOP-I-28_11.8x8mm_P0.55mm +TSOP I, 28 pins, 18.8x8mm body, 0.55mm pitch, IPC-calculated pads (http://ww1.microchip.com/downloads/en/devicedoc/doc0807.pdf) +TSOP I 28 pins +0 +28 +28 +Package_SO +TSOP-I-32_11.8x8mm_P0.5mm +TSOP-I, 32 Pin (http://www.issi.com/WW/pdf/61-64C5128AL.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSOP-I SO +0 +32 +32 +Package_SO +TSOP-I-32_12.4x8mm_P0.5mm +TSOP-I, 32 Pin (https://www.jedec.org/standards-documents/docs/mo-142-d variation BA), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSOP-I SO +0 +32 +32 +Package_SO +TSOP-I-32_14.4x8mm_P0.5mm +TSOP-I, 32 Pin (https://www.jedec.org/standards-documents/docs/mo-142-d variation BB), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSOP-I SO +0 +32 +32 +Package_SO +TSOP-I-32_16.4x8mm_P0.5mm +TSOP-I, 32 Pin (https://www.jedec.org/standards-documents/docs/mo-142-d variation BC), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSOP-I SO +0 +32 +32 +Package_SO +TSOP-I-32_18.4x8mm_P0.5mm +TSOP-I, 32 Pin (https://www.jedec.org/standards-documents/docs/mo-142-d variation BD), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSOP-I SO +0 +32 +32 +Package_SO +TSOP-I-32_18.4x8mm_P0.5mm_Reverse +TSOP I, 32 pins, 18.4x8mm body (http://www.futurlec.com/Datasheet/Memory/628128.pdf), reverse mount +TSOP I 32 reverse +0 +32 +32 +Package_SO +TSOP-I-40_12.4x10mm_P0.5mm +TSOP-I, 40 Pin (https://www.jedec.org/standards-documents/docs/mo-142-d variation CA), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSOP-I SO +0 +40 +40 +Package_SO +TSOP-I-40_14.4x10mm_P0.5mm +TSOP-I, 40 Pin (https://www.jedec.org/standards-documents/docs/mo-142-d variation CB), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSOP-I SO +0 +40 +40 +Package_SO +TSOP-I-40_16.4x10mm_P0.5mm +TSOP-I, 40 Pin (https://www.jedec.org/standards-documents/docs/mo-142-d variation CC), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSOP-I SO +0 +40 +40 +Package_SO +TSOP-I-40_18.4x10mm_P0.5mm +TSOP-I, 40 Pin (https://www.jedec.org/standards-documents/docs/mo-142-d variation CD), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSOP-I SO +0 +40 +40 +Package_SO +TSOP-I-48_12.4x12mm_P0.5mm +TSOP-I, 48 Pin (https://www.jedec.org/standards-documents/docs/mo-142-d variation DA), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSOP-I SO +0 +48 +48 +Package_SO +TSOP-I-48_14.4x12mm_P0.5mm +TSOP-I, 48 Pin (https://www.jedec.org/standards-documents/docs/mo-142-d variation DB), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSOP-I SO +0 +48 +48 +Package_SO +TSOP-I-48_16.4x12mm_P0.5mm +TSOP-I, 48 Pin (https://www.jedec.org/standards-documents/docs/mo-142-d variation DC), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSOP-I SO +0 +48 +48 +Package_SO +TSOP-I-48_18.4x12mm_P0.5mm +TSOP-I, 48 Pin (https://www.jedec.org/standards-documents/docs/mo-142-d variation DD), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSOP-I SO +0 +48 +48 +Package_SO +TSOP-I-56_14.4x14mm_P0.5mm +TSOP-I, 56 Pin (https://www.jedec.org/standards-documents/docs/mo-142-d variation EA), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSOP-I SO +0 +56 +56 +Package_SO +TSOP-I-56_16.4x14mm_P0.5mm +TSOP-I, 56 Pin (https://www.jedec.org/standards-documents/docs/mo-142-d variation EB), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSOP-I SO +0 +56 +56 +Package_SO +TSOP-I-56_18.4x14mm_P0.5mm +TSOP-I, 56 Pin (https://www.jedec.org/standards-documents/docs/mo-142-d variation EC), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSOP-I SO +0 +56 +56 +Package_SO +TSOP-II-32_21.0x10.2mm_P1.27mm +32-lead plastic TSOP; Type II +TSOP-II 32 +0 +32 +32 +Package_SO +TSOP-II-40-44_10.16x18.37mm_P0.8mm +TSOP-II, 40 Pin (https://www.renesas.com/us/en/document/psc/package-drawing-tsop2-44pin-ptsb0044ge-e), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSOP-II SO +0 +40 +40 +Package_SO +TSOP-II-44_10.16x18.41mm_P0.8mm +TSOP-II, 44 Pin (http://www.issi.com/WW/pdf/61-64C5128AL.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSOP-II SO +0 +44 +44 +Package_SO +TSOP-II-54_22.2x10.16mm_P0.8mm +54-lead TSOP typ II package +TSOPII TSOP2 +0 +54 +54 +Package_SO +TSSOP-4_4.4x5mm_P4mm +TSSOP, 4 Pin (https://www.onsemi.com/pub/Collateral/MDB8S-D.PDF#page=4), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +4 +4 +Package_SO +TSSOP-8_3x3mm_P0.65mm +TSSOP8: plastic thin shrink small outline package; 8 leads; body width 3 mm; (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot505-1_po.pdf) +SSOP 0.65 +0 +8 +8 +Package_SO +TSSOP-8_4.4x3mm_P0.65mm +TSSOP, 8 Pin (JEDEC MO-153 Var AA https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +8 +8 +Package_SO +TSSOP-10_3x3mm_P0.5mm +TSSOP10: plastic thin shrink small outline package; 10 leads; body width 3 mm; (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot552-1_po.pdf) +SSOP 0.5 +0 +10 +10 +Package_SO +TSSOP-14-1EP_4.4x5mm_P0.65mm +14-Lead Plastic Thin Shrink Small Outline (ST)-4.4 mm Body [TSSOP] with exposed pad (http://cds.linear.com/docs/en/datasheet/34301fa.pdf) +SSOP 0.65 exposed pad +0 +18 +15 +Package_SO +TSSOP-14_4.4x3.6mm_P0.4mm +TSSOP, 14 Pin (JEDEC MO-194 Var AA https://www.jedec.org/document_search?search_api_views_fulltext=MO-194), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +14 +14 +Package_SO +TSSOP-14_4.4x5mm_P0.65mm +TSSOP, 14 Pin (JEDEC MO-153 Var AB-1 https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +14 +14 +Package_SO +TSSOP-16-1EP_4.4x5mm_P0.65mm +FE Package; 16-Lead Plastic TSSOP (4.4mm); Exposed Pad Variation BB; (see Linear Technology 1956f.pdf) +SSOP 0.65 +0 +24 +17 +Package_SO +TSSOP-16-1EP_4.4x5mm_P0.65mm_EP3x3mm +TSSOP, 16 Pin (Allegro A4954 https://www.allegromicro.com/-/media/Files/Datasheets/A4954-Datasheet.ashx), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +21 +17 +Package_SO +TSSOP-16-1EP_4.4x5mm_P0.65mm_EP3x3mm_ThermalVias +TSSOP, 16 Pin (Allegro A4954 https://www.allegromicro.com/-/media/Files/Datasheets/A4954-Datasheet.ashx), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +26 +17 +Package_SO +TSSOP-16_4.4x3.6mm_P0.4mm +TSSOP, 16 Pin (JEDEC MO-194 Var AB https://www.jedec.org/document_search?search_api_views_fulltext=MO-194), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +16 +16 +Package_SO +TSSOP-16_4.4x5mm_P0.65mm +TSSOP, 16 Pin (JEDEC MO-153 Var AB https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +16 +16 +Package_SO +TSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP2.15x3.35mm +TSSOP, 20 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-100132.PDF), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +25 +21 +Package_SO +TSSOP-20_4.4x5mm_P0.4mm +TSSOP, 20 Pin (JEDEC MO-194 Var AC https://www.jedec.org/document_search?search_api_views_fulltext=MO-194), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +20 +20 +Package_SO +TSSOP-20_4.4x5mm_P0.5mm +TSSOP, 20 Pin (JEDEC MO-153 Var BA https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +20 +20 +Package_SO +TSSOP-20_4.4x6.5mm_P0.65mm +TSSOP, 20 Pin (JEDEC MO-153 Var AC https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +20 +20 +Package_SO +TSSOP-24-1EP_4.4x7.8mm_P0.65mm_EP3.2x5mm +TSSOP, 24 Pin (https://www.st.com/resource/en/datasheet/led1642gw.pdf#page=37), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +31 +25 +Package_SO +TSSOP-24_4.4x5mm_P0.4mm +TSSOP, 24 Pin (JEDEC MO-153 Var CA https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +24 +24 +Package_SO +TSSOP-24_4.4x6.5mm_P0.5mm +TSSOP, 24 Pin (JEDEC MO-153 Var BB https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +24 +24 +Package_SO +TSSOP-24_4.4x7.8mm_P0.65mm +TSSOP, 24 Pin (JEDEC MO-153 Var AD https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +24 +24 +Package_SO +TSSOP-24_6.1x7.8mm_P0.65mm +TSSOP, 24 Pin (JEDEC MO-153 Var DA https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +24 +24 +Package_SO +TSSOP-28-1EP_4.4x9.7mm_P0.65mm +TSSOP28: plastic thin shrink small outline package; 28 leads; body width 4.4 mm; Exposed Pad Variation; (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot361-1_po.pdf) +SSOP 0.65 +0 +36 +29 +Package_SO +TSSOP-28-1EP_4.4x9.7mm_P0.65mm_EP2.85x6.7mm +TSSOP, 28 Pin (JEDEC MO-153 Var AET Pkg.Code U28E-4 https://pdfserv.maximintegrated.com/package_dwgs/21-0108.PDF), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +35 +29 +Package_SO +TSSOP-28_4.4x7.8mm_P0.5mm +TSSOP, 28 Pin (JEDEC MO-153 Var BC https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +28 +28 +Package_SO +TSSOP-28_4.4x9.7mm_P0.65mm +TSSOP, 28 Pin (JEDEC MO-153 Var AE https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +28 +28 +Package_SO +TSSOP-28_6.1x7.8mm_P0.5mm +TSSOP, 28 Pin (JEDEC MO-153 Var EA https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +28 +28 +Package_SO +TSSOP-28_6.1x9.7mm_P0.65mm +TSSOP, 28 Pin (JEDEC MO-153 Var DB https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +28 +28 +Package_SO +TSSOP-28_8x9.7mm_P0.65mm +TSSOP, 28 Pin (JEDEC MO-153 Var GA https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +28 +28 +Package_SO +TSSOP-30_4.4x7.8mm_P0.5mm +TSSOP, 30 Pin (JEDEC MO-153 Var BC-1 https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +30 +30 +Package_SO +TSSOP-30_6.1x9.7mm_P0.65mm +TSSOP, 30 Pin (JEDEC MO-153 Var DB-1 https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +30 +30 +Package_SO +TSSOP-32_4.4x6.5mm_P0.4mm +TSSOP, 32 Pin (JEDEC MO-153 Var CB https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +32 +32 +Package_SO +TSSOP-32_6.1x11mm_P0.65mm +TSSOP, 32 Pin (JEDEC MO-153 Var DC https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +32 +32 +Package_SO +TSSOP-32_8x11mm_P0.65mm +TSSOP, 32 Pin (JEDEC MO-153 Var GB https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +32 +32 +Package_SO +TSSOP-36_4.4x7.8mm_P0.4mm +TSSOP, 36 Pin (JEDEC MO-153 Var CC https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +36 +36 +Package_SO +TSSOP-36_4.4x9.7mm_P0.5mm +TSSOP, 36 Pin (JEDEC MO-153 Var BD https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +36 +36 +Package_SO +TSSOP-36_6.1x7.8mm_P0.4mm +TSSOP, 36 Pin (JEDEC MO-153 Var FA https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +36 +36 +Package_SO +TSSOP-36_6.1x9.7mm_P0.5mm +TSSOP, 36 Pin (JEDEC MO-153 Var EB https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +36 +36 +Package_SO +TSSOP-36_6.1x12.5mm_P0.65mm +TSSOP, 36 Pin (JEDEC MO-153 Var DD https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +36 +36 +Package_SO +TSSOP-36_8x9.7mm_P0.5mm +TSSOP, 36 Pin (JEDEC MO-153 Var HA https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +36 +36 +Package_SO +TSSOP-36_8x12.5mm_P0.65mm +TSSOP, 36 Pin (JEDEC MO-153 Var GC https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +36 +36 +Package_SO +TSSOP-38_4.4x9.7mm_P0.5mm +TSSOP, 38 Pin (JEDEC MO-153 Var BD https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +38 +38 +Package_SO +TSSOP-38_6.1x12.5mm_P0.65mm +TSSOP, 38 Pin (JEDEC MO-153 Var DD-1 https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +38 +38 +Package_SO +TSSOP-40_6.1x11mm_P0.5mm +TSSOP, 40 Pin (JEDEC MO-153 Var EC https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +40 +40 +Package_SO +TSSOP-40_6.1x14mm_P0.65mm +TSSOP, 40 Pin (JEDEC MO-153 Var DE https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +40 +40 +Package_SO +TSSOP-40_8x11mm_P0.5mm +TSSOP, 40 Pin (JEDEC MO-153 Var HB https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +40 +40 +Package_SO +TSSOP-40_8x14mm_P0.65mm +TSSOP, 40 Pin (JEDEC MO-153 Var GD https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +40 +40 +Package_SO +TSSOP-44_4.4x11.2mm_P0.5mm +TSSOP44: plastic thin shrink small outline package; 44 leads; body width 4.4 mm (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot510-1_po.pdf) +SSOP 0.5 +0 +44 +44 +Package_SO +TSSOP-44_4.4x11mm_P0.5mm +TSSOP, 44 Pin (JEDEC MO-153 Var BE https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +44 +44 +Package_SO +TSSOP-44_6.1x11mm_P0.5mm +TSSOP, 44 Pin (JEDEC MO-153 Var EC-1 https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +44 +44 +Package_SO +TSSOP-48_4.4x9.7mm_P0.4mm +TSSOP, 48 Pin (JEDEC MO-153 Var CD https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +48 +48 +Package_SO +TSSOP-48_6.1x9.7mm_P0.4mm +TSSOP, 48 Pin (JEDEC MO-153 Var FB https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +48 +48 +Package_SO +TSSOP-48_6.1x12.5mm_P0.5mm +TSSOP, 48 Pin (JEDEC MO-153 Var ED https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +48 +48 +Package_SO +TSSOP-48_8x9.7mm_P0.4mm +TSSOP, 48 Pin (JEDEC MO-153 Var JA https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +48 +48 +Package_SO +TSSOP-48_8x12.5mm_P0.5mm +TSSOP, 48 Pin (JEDEC MO-153 Var HC https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +48 +48 +Package_SO +TSSOP-50_4.4x12.5mm_P0.5mm +TSSOP, 50 Pin (JEDEC MO-153 Var BF https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +50 +50 +Package_SO +TSSOP-52_6.1x11mm_P0.4mm +TSSOP, 52 Pin (JEDEC MO-153 Var FC https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +52 +52 +Package_SO +TSSOP-52_8x11mm_P0.4mm +TSSOP, 52 Pin (JEDEC MO-153 Var JB https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +52 +52 +Package_SO +TSSOP-56_4.4x11.3mm_P0.4mm +TSSOP, 56 Pin (JEDEC MO-194 Var AF https://www.jedec.org/document_search?search_api_views_fulltext=MO-194), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +56 +56 +Package_SO +TSSOP-56_6.1x12.5mm_P0.4mm +TSSOP, 56 Pin (JEDEC MO-153 Var FD https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +56 +56 +Package_SO +TSSOP-56_6.1x14mm_P0.5mm +TSSOP, 56 Pin (JEDEC MO-153 Var EE https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +56 +56 +Package_SO +TSSOP-56_8x12.5mm_P0.4mm +TSSOP, 56 Pin (JEDEC MO-153 Var JC https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +56 +56 +Package_SO +TSSOP-56_8x14mm_P0.5mm +TSSOP, 56 Pin (JEDEC MO-153 Var HD https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +56 +56 +Package_SO +TSSOP-60_8x12.5mm_P0.4mm +TSSOP, 60 Pin (JEDEC MO-153 Var JC-1 https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +60 +60 +Package_SO +TSSOP-64_6.1x14mm_P0.4mm +TSSOP, 64 Pin (JEDEC MO-153 Var FE https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +64 +64 +Package_SO +TSSOP-64_6.1x17mm_P0.5mm +TSSOP, 64 Pin (JEDEC MO-153 Var EF https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +64 +64 +Package_SO +TSSOP-64_8x14mm_P0.4mm +TSSOP, 64 Pin (JEDEC MO-153 Var JD https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +64 +64 +Package_SO +TSSOP-68_8x14mm_P0.4mm +TSSOP, 68 Pin (JEDEC MO-153 Var JD-1 https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +68 +68 +Package_SO +TSSOP-80_6.1x17mm_P0.4mm +TSSOP, 80 Pin (JEDEC MO-153 Var FF https://www.jedec.org/document_search?search_api_views_fulltext=MO-153), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +80 +80 +Package_SO +TSSOP-100_6.1x20.8mm_P0.4mm +TSSOP, 100 Pin (JEDEC MO-194 Var BB https://www.jedec.org/document_search?search_api_views_fulltext=MO-194), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSSOP SO +0 +100 +100 +Package_SO +Texas_HSOP-8-1EP_3.9x4.9mm_P1.27mm +Texas Instruments HSOP 9, 1.27mm pitch, 3.9x4.9mm body, exposed pad, DDA0008J (http://www.ti.com/lit/ds/symlink/tps5430.pdf) +HSOP 1.27 +0 +11 +9 +Package_SO +Texas_HSOP-8-1EP_3.9x4.9mm_P1.27mm_ThermalVias +Texas Instruments HSOP 9, 1.27mm pitch, 3.9x4.9mm body, exposed pad, thermal vias, DDA0008J (http://www.ti.com/lit/ds/symlink/tps5430.pdf) +HSOP 1.27 +0 +20 +9 +Package_SO +Texas_HTSOP-8-1EP_3.9x4.9mm_P1.27mm_EP2.95x4.9mm_Mask2.4x3.1mm_ThermalVias +8-pin HTSOP package with 1.27mm pin pitch, compatible with SOIC-8, 3.9x4.9mm body, exposed pad, thermal vias, http://www.ti.com/lit/ds/symlink/drv8870.pdf +HTSOP 1.27 +0 +18 +9 +Package_SO +Texas_PWP0020A +20-Pin Thermally Enhanced Thin Shrink Small-Outline Package, Body 4.4x6.5x1.1mm, Pad 3.0x4.2mm, Texas Instruments (see http://www.ti.com/lit/ds/symlink/lm5118.pdf) +PWP HTSSOP 0.65mm +0 +25 +21 +Package_SO +Texas_R-PDSO-G8_EP2.95x4.9mm_Mask2.4x3.1mm +HSOIC, 8 Pin (http://www.ti.com/lit/ds/symlink/lmr14030.pdf#page=28, http://www.ti.com/lit/ml/msoi002j/msoi002j.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +HSOIC SO +0 +16 +9 +Package_SO +Texas_R-PDSO-G8_EP2.95x4.9mm_Mask2.4x3.1mm_ThermalVias +HSOIC, 8 Pin (http://www.ti.com/lit/ds/symlink/lmr14030.pdf#page=28, http://www.ti.com/lit/ml/msoi002j/msoi002j.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +HSOIC SO +0 +23 +9 +Package_SO +Texas_R-PDSO-N5 +Plastic Small outline http://www.ti.com/lit/ml/mpds158c/mpds158c.pdf +SOT23 R-PDSO-N5 +0 +5 +5 +Package_SO +VSO-40_7.6x15.4mm_P0.762mm +VSO40: plastic very small outline package; 40 leads (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot158-1_po.pdf) +SSOP 0.762 +0 +40 +40 +Package_SO +VSO-56_11.1x21.5mm_P0.75mm +VSO56: plastic very small outline package; 56 leads (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot190-1_po.pdf) +SSOP 0.75 +0 +56 +56 +Package_SO +VSSOP-8_2.3x2mm_P0.5mm +VSSOP-8 2.3x2mm Pitch 0.5mm +VSSOP-8 2.3x2mm Pitch 0.5mm +0 +8 +8 +Package_SO +VSSOP-8_2.4x2.1mm_P0.5mm +http://www.ti.com/lit/ml/mpds050d/mpds050d.pdf +VSSOP DCU R-PDSO-G8 Pitch0.5mm +0 +8 +8 +Package_SO +VSSOP-8_3.0x3.0mm_P0.65mm +VSSOP-8 3.0 x 3.0, http://www.ti.com/lit/ds/symlink/lm75b.pdf +VSSOP-8 3.0 x 3.0 +0 +8 +8 +Package_SO +VSSOP-10_3x3mm_P0.5mm +VSSOP, 10 Pin (http://www.ti.com/lit/ds/symlink/ads1115.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +VSSOP SO +0 +10 +10 +Package_SO +Vishay_PowerPAK_1212-8_Dual +PowerPAK 1212-8 Dual (https://www.vishay.com/docs/71656/ppak12128.pdf, https://www.vishay.com/docs/72598/72598.pdf) +Vishay_PowerPAK_1212-8_Dual +0 +6 +6 +Package_SO +Vishay_PowerPAK_1212-8_Single +PowerPAK 1212-8 Single (https://www.vishay.com/docs/71656/ppak12128.pdf, https://www.vishay.com/docs/72597/72597.pdf) +Vishay PowerPAK 1212-8 Single +0 +5 +5 +Package_SO +Zetex_SM8 +Zetex, SMD, 8 pin package (http://datasheet.octopart.com/ZDT6758TA-Zetex-datasheet-68057.pdf) +Zetex SM8 +0 +8 +8 +Package_SON +Diodes_PowerDI3333-8 +Diodes Incorporated PowerDI3333-8, Plastic Dual Flat No Lead Package, 3.3x3.3x0.8mm Body, https://www.diodes.com/assets/Package-Files/PowerDI3333-8.pdf +PowerDI 0.65 +0 +13 +5 +Package_SON +Diodes_PowerDI3333-8_UXC_3.3x3.3mm_P0.65mm +Diodes Incorporated PowerDI3333-8 UXC, 3.05x3.05x0.8mm Body, https://www.diodes.com/assets/Package-Files/PowerDI3333-8%20(Type%20UXC).pdf +PowerDI 0.65 +0 +6 +6 +Package_SON +Fairchild_DualPower33-6_3x3mm +Fairchild Power33 MOSFET package, 3x3mm (see https://www.fairchildsemi.com/datasheets/FD/FDMC8032L.pdf) +mosfet +0 +18 +6 +Package_SON +Fairchild_MicroPak-6_1.0x1.45mm_P0.5mm +Fairchild-specific MicroPak-6 1.0x1.45mm Pitch 0.5mm https://www.nxp.com/docs/en/application-note/AN10343.pdff +Fairchild-specific MicroPak-6 1.0x1.45mm Pitch 0.5mm +0 +6 +6 +Package_SON +Fairchild_MicroPak2-6_1.0x1.0mm_P0.35mm +Fairchild-specific MicroPak2-6 1.0x1.0mm Pitch 0.35mm https://www.nxp.com/docs/en/application-note/AN10343.pdff +Fairchild-specific MicroPak2-6 1.0x1.0mm Pitch 0.35mm +0 +6 +6 +Package_SON +HUSON-3-1EP_2x2mm_P1.3mm_EP1.1x1.6mm +HUSON, 3 Pin, SOT1061 (Ref: https://assets.nexperia.com/documents/data-sheet/PMEG2020CPA.pdf) +huson nolead SOT1061 +0 +4 +3 +Package_SON +HVSON-8-1EP_3x3mm_P0.65mm_EP1.6x2.4mm +HVSON, 8 Pin (https://www.nxp.com/docs/en/data-sheet/TJA1051.pdf#page=16), generated with kicad-footprint-generator ipc_noLead_generator.py +HVSON NoLead +0 +13 +9 +Package_SON +HVSON-8-1EP_4x4mm_P0.8mm_EP2.2x3.1mm +HVSON, 8 Pin (https://www.nxp.com/docs/en/data-sheet/PCF8523.pdf (page 57)), generated with kicad-footprint-generator ipc_noLead_generator.py +HVSON NoLead +0 +13 +9 +Package_SON +Infineon_PG-LSON-8-1 +https://www.infineon.com/cms/en/product/packages/PG-LSON/PG-LSON-8-1/ +PG-LSON-8-1 +0 +17 +9 +Package_SON +Infineon_PG-TDSON-8_6.15x5.15mm +Infineon, PG-TDSON-8, 6.15x5.15x1mm, https://www.infineon.com/dgdl/Infineon-BSC520N15NS3_-DS-v02_02-en.pdf?fileId=db3a30432239cccd0122eee57d9b21a4 +Infineon OptiMOS +0 +21 +5 +Package_SON +Infineon_PG-TISON-8-2 +Infineon, PG-TISON-8-2, 5x6x1.15mm, 1.27mm Pitch, Exposed Paddle, https://www.infineon.com/cms/en/product/packages/PG-TISON/PG-TISON-8-2/ +tison +0 +23 +7 +Package_SON +Infineon_PG-TISON-8-3 +Infineon, PG-TISON-8-2, 5x6x1.15mm, 1.27mm Pitch, Exposed Paddle, https://www.infineon.com/cms/en/product/packages/PG-TISON/PG-TISON-8-2/ +tison +0 +23 +7 +Package_SON +Infineon_PG-TISON-8-4 +Infineon, PG-TISON-8-4, 5x6x1.15mm, 1.27mm Pitch, Exposed Paddle, https://www.infineon.com/cms/en/product/packages/PG-TISON/PG-TISON-8-4/ +tison +0 +26 +8 +Package_SON +Infineon_PG-TISON-8-5 +Infineon, PG-TISON-8-5, 8x8x1.1mm, 1mm Pitch, https://www.infineon.com/cms/en/product/packages/PG-TISON/PG-TISON-8-5/ +tison +0 +34 +8 +Package_SON +NXP_XSON-16 +http://www.nxp.com/documents/outline_drawing/SOT1341-1.pdf +NXP XSON SOT-1341 +0 +16 +16 +Package_SON +Nexperia_HUSON-8_USON-8-1EP_1.35x1.7mm_P0.4mm_EP0.4x1.2mm +Nexperia HUSON-8 USON, 8 Pin (https://assets.nexperia.com/documents/data-sheet/IP4251_52_53_54-TTL.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +Nexperia USON NoLead +0 +10 +9 +Package_SON +Nexperia_HUSON-12_USON-12-1EP_1.35x2.5mm_P0.4mm_EP0.4x2mm +Nexperia HUSON-12 USON, 12 Pin (https://assets.nexperia.com/documents/data-sheet/IP4251_52_53_54-TTL.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +Nexperia USON NoLead +0 +14 +13 +Package_SON +Nexperia_HUSON-16_USON-16-1EP_1.35x3.3mm_P0.4mm_EP0.4x2.8mm +Nexperia HUSON-16 USON, 16 Pin (https://assets.nexperia.com/documents/data-sheet/IP4251_52_53_54-TTL.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +Nexperia USON NoLead +0 +18 +17 +Package_SON +ROHM_VML0806 +VML0806, Rohm (http://rohmfs.rohm.com/en/techdata_basic/transistor/soldering_condition/VML0806_Soldering_Condition.pdf, http://rohmfs.rohm.com/en/products/databook/package/spec/discrete/vml0806_tr-e.pdf) +ROHM VML0806 +0 +3 +3 +Package_SON +RTC_SMD_MicroCrystal_C3_2.5x3.7mm +MicroCrystal C3 2.5x3.7mm, https://www.microcrystal.com/fileadmin/Media/Products/RTC/Datasheet/RV-1805-C3.pdf +RTC C3 +0 +10 +10 +Package_SON +SON-8-1EP_3x2mm_P0.5mm_EP1.4x1.6mm +SON, 8 Pin (http://www.fujitsu.com/downloads/MICRO/fsa/pdf/products/memory/fram/MB85RS16-DS501-00014-6v0-E.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +SON NoLead +0 +13 +9 +Package_SON +Texas_DPY0002A_0.6x1mm_P0.65mm +X1SON 2 pin 0.6x1mm 0.375mm height package, https://www.ti.com/lit/ml/mpss034c/mpss034c.pdf, https://www.ti.com/lit/ds/symlink/tpd6e05u06.pdf +X1SON +0 +2 +2 +Package_SON +Texas_DQK +Texas WSON-6 DQK, http://www.ti.com/lit/ds/symlink/csd16301q2.pdf +Texas WSON6 2x2mm +0 +10 +8 +Package_SON +Texas_DQX002A +Texas DQX - 2pin WSON, 2.5x1.7mm body, 0.8mm height. https://www.ti.com/lit/ds/symlink/lmt01.pdf +WSON-2 DQX +0 +2 +2 +Package_SON +Texas_DRC0010J +Texas DRC0010J, VSON10 3x3mm Body, 0.5mm Pitch, http://www.ti.com/lit/ds/symlink/tps63000.pdf +Texas VSON10 3x3mm +0 +17 +11 +Package_SON +Texas_DRC0010J_ThermalVias +Texas DRC0010J, VSON10 3x3mm Body, 0.5mm Pitch, http://www.ti.com/lit/ds/symlink/tps63000.pdf +Texas VSON10 3x3mm +0 +21 +11 +Package_SON +Texas_DSC0010J +3x3mm Body, 0.5mm Pitch, DSC0010J, WSON, http://www.ti.com/lit/ds/symlink/tps61201.pdf +0.5 DSC0010J WSON +0 +33 +11 +Package_SON +Texas_DSC0010J_ThermalVias +3x3mm Body, 0.5mm Pitch, DSC0010J, WSON, http://www.ti.com/lit/ds/symlink/tps61201.pdf +0.5 DSC0010J WSON +0 +39 +11 +Package_SON +Texas_PWSON-N6 +Plastic Small Outline No-Lead http://www.ti.com/lit/ml/mpds176e/mpds176e.pdf +Plastic Small Outline No-Lead +0 +7 +7 +Package_SON +Texas_R-PUSON-N8_USON-8-1EP_1.6x2.1mm_P0.5mm_EP0.4x1.7mm +USON, 8 Pin (https://www.ti.com/lit/gpn/tpd3f303#page=15), generated with kicad-footprint-generator ipc_noLead_generator.py +USON NoLead +0 +10 +9 +Package_SON +Texas_R-PUSON-N14 +USON, 14 Pin (https://www.ti.com/lit/ds/symlink/tpd6e05u06.pdf#page=28), generated with kicad-footprint-generator ipc_noLead_generator.py +USON NoLead +0 +14 +14 +Package_SON +Texas_R-PWSON-N12_EP0.4x2mm +http://www.ti.com/lit/ds/symlink/tpd6f003.pdf +WSON SMD +0 +16 +13 +Package_SON +Texas_S-PDSO-N12 +http://www.ti.com/lit/ds/symlink/bq27441-g1.pdf +SON thermal pads +0 +44 +13 +Package_SON +Texas_S-PVSON-N8 +8-Lead Plastic VSON, 3x3mm Body, 0.65mm Pitch, S-PVSON-N8, http://www.ti.com/lit/ds/symlink/opa2333.pdf +DFN 0.65 S-PVSON-N8 +0 +21 +9 +Package_SON +Texas_S-PVSON-N8_ThermalVias +8-Lead Plastic VSON, 3x3mm Body, 0.65mm Pitch, S-PVSON-N8, http://www.ti.com/lit/ds/symlink/opa2333.pdf +DFN 0.65 S-PVSON-N8 +0 +27 +9 +Package_SON +Texas_S-PVSON-N10 +3x3mm Body, 0.5mm Pitch, S-PVSON-N10, DRC, http://www.ti.com/lit/ds/symlink/tps61201.pdf +0.5 S-PVSON-N10 DRC +0 +33 +11 +Package_SON +Texas_S-PVSON-N10_ThermalVias +3x3mm Body, 0.5mm Pitch, S-PVSON-N10, DRC, http://www.ti.com/lit/ds/symlink/tps61201.pdf +0.5 S-PVSON-N10 DRC +0 +39 +11 +Package_SON +Texas_S-PWSON-N8_EP1.2x2mm +WSON, 8 Pin, TI DRG, (http://www.ti.com/lit/ds/symlink/lp2951.pdf#page=27), generated with kicad-footprint-generator ipc_noLead_generator.py +WSON NoLead +0 +11 +9 +Package_SON +Texas_S-PWSON-N10 +3x3mm Body, 0.5mm Pitch, S-PWSON-N10, DSC, http://www.ti.com/lit/ds/symlink/tps63060.pdf +0.5 S-PWSON-N10 DSC +0 +41 +11 +Package_SON +Texas_S-PWSON-N10_ThermalVias +3x3mm Body, 0.5mm Pitch, S-PWSON-N10, DSC, http://www.ti.com/lit/ds/symlink/tps63060.pdf +0.5 S-PWSON-N10 DSC +0 +47 +11 +Package_SON +Texas_USON-6_1x1.45mm_P0.5mm_SMD +USON, 6 Pin (https://www.ti.com/lit/ds/symlink/sn74auc1g04.pdf#page=24), Solder Mask Defined +USON NoLead DRY0006A +0 +6 +6 +Package_SON +Texas_X2SON-4_1x1mm_P0.65mm +X2SON 5 pin 1x1mm package (Reference Datasheet: http://www.ti.com/lit/ds/sbvs193d/sbvs193d.pdf Reference part: TPS383x) [StepUp generated footprint] +X2SON +0 +13 +5 +Package_SON +Texas_X2SON-5_0.8x0.8mm_P0.48mm +X2SON 5 pin 0.8x0.8mm package (Reference Datasheet: https://www.ti.com/lit/ds/symlink/sn74lvc1g17.pdf#page=39 Reference part: SN74LVC1G17) [StepUp generated footprint] +X2SON DPW0005A +0 +9 +5 +Package_SON +Texas_X2SON-5_0.8x0.8mm_P0.48mm_RoutingVia +X2SON 5 pin 0.8x0.8mm package (Reference Datasheet: https://www.ti.com/lit/ds/symlink/sn74lvc1g17.pdf#page=39 Reference part: SN74LVC1G17) [StepUp generated footprint] +X2SON DPW0005A +0 +10 +5 +Package_SON +USON-10_2.5x1.0mm_P0.5mm +USON-10 2.5x1.0mm_ Pitch 0.5mm http://www.ti.com/lit/ds/symlink/tpd4e02b04.pdf +USON-10 2.5x1.0mm Pitch 0.5mm +0 +10 +10 +Package_SON +USON-20_2x4mm_P0.4mm +USON-20 2x4mm Pitch 0.4mm http://www.ti.com/lit/ds/symlink/txb0108.pdf +USON-20 2x4mm Pitch 0.4mm +0 +20 +20 +Package_SON +VSON-8-1EP_3x3mm_P0.65mm_EP1.65x2.4mm +VSON, 8 Pin (https://www.ti.com/lit/pdf/qfnd619), generated with kicad-footprint-generator ipc_noLead_generator.py +VSON NoLead +0 +10 +9 +Package_SON +VSON-8-1EP_3x3mm_P0.65mm_EP1.65x2.4mm_ThermalVias +VSON, 8 Pin (https://www.ti.com/lit/pdf/qfnd619), generated with kicad-footprint-generator ipc_noLead_generator.py +VSON NoLead +0 +16 +9 +Package_SON +VSON-8_1.5x2mm_P0.5mm +VSON, 8 Pin (http://www.ti.com/lit/ds/symlink/tps62840.pdf#page=37), generated with kicad-footprint-generator ipc_noLead_generator.py +VSON NoLead +0 +8 +8 +Package_SON +VSON-8_3.3x3.3mm_P0.65mm_NexFET +8-Lead Plastic Dual Flat, No Lead Package (MF) - 3.3x3.3x1 mm Body [VSON] http://www.ti.com/lit/ds/symlink/csd87334q3d.pdf +VSON 0.65 +0 +13 +5 +Package_SON +VSON-10-1EP_3x3mm_P0.5mm_EP1.2x2mm +VSON, 10 Pin (http://rohmfs.rohm.com/en/products/databook/datasheet/ic/power/switching_regulator/bd8314nuv-e.pdf (Page 20)), generated with kicad-footprint-generator ipc_noLead_generator.py +VSON NoLead +0 +15 +11 +Package_SON +VSON-10-1EP_3x3mm_P0.5mm_EP1.2x2mm_ThermalVias +VSON, 10 Pin (http://rohmfs.rohm.com/en/products/databook/datasheet/ic/power/switching_regulator/bd8314nuv-e.pdf (Page 20)), generated with kicad-footprint-generator ipc_noLead_generator.py +VSON NoLead +0 +18 +11 +Package_SON +VSON-10-1EP_3x3mm_P0.5mm_EP1.65x2.4mm +VSON 10 Thermal on 11 3x3mm Pitch 0.5mm http://chip.tomsk.ru/chip/chipdoc.nsf/Package/D8A64DD165C2AAD9472579400024FC41!OpenDocument +VSON 10 Thermal on 11 3x3mm Pitch 0.5mm +0 +21 +11 +Package_SON +VSON-10-1EP_3x3mm_P0.5mm_EP1.65x2.4mm_ThermalVias +VSON 10 Thermal on 11 3x3mm Pitch 0.5mm http://chip.tomsk.ru/chip/chipdoc.nsf/Package/D8A64DD165C2AAD9472579400024FC41!OpenDocument +VSON 10 Thermal on 11 3x3mm Pitch 0.5mm +0 +27 +11 +Package_SON +VSONP-8-1EP_5x6_P1.27mm +SON, 8-Leads, Body 5x6x1mm, Pitch 1.27mm; (see Texas Instruments CSD18531Q5A http://www.ti.com/lit/ds/symlink/csd18531q5a.pdf) +VSONP 1.27 +0 +13 +3 +Package_SON +WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm +WSON, 6 Pin (http://www.ti.com/lit/ds/symlink/tps61040.pdf#page=35), generated with kicad-footprint-generator ipc_noLead_generator.py +WSON NoLead +0 +9 +7 +Package_SON +WSON-6-1EP_2x2mm_P0.65mm_EP1x1.6mm_ThermalVias +WSON, 6 Pin (http://www.ti.com/lit/ds/symlink/tps61040.pdf#page=35), generated with kicad-footprint-generator ipc_noLead_generator.py +WSON NoLead +0 +12 +7 +Package_SON +WSON-6-1EP_3x3mm_P0.95mm +WSON6 3*3 MM, 0.95 PITCH; http://www.ti.com/lit/ds/symlink/lmr62421.pdf +WSON6 0.95 +0 +10 +7 +Package_SON +WSON-6_1.5x1.5mm_P0.5mm +WSON6, http://www.ti.com/lit/ds/symlink/tlv702.pdf +WSON6_1.5x1.5mm_P0.5mm +0 +6 +6 +Package_SON +WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm +8-Lead Plastic WSON, 2x2mm Body, 0.5mm Pitch, WSON-8, http://www.ti.com/lit/ds/symlink/lm27761.pdf +WSON 8 1EP +0 +11 +9 +Package_SON +WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm_ThermalVias +8-Lead Plastic WSON, 2x2mm Body, 0.5mm Pitch, WSON-8, http://www.ti.com/lit/ds/symlink/lm27761.pdf +WSON 8 1EP ThermalVias +0 +14 +9 +Package_SON +WSON-8-1EP_3x2.5mm_P0.5mm_EP1.2x1.5mm_PullBack +WSON, 8 Pin (http://www.ti.com/lit/ml/mpds400/mpds400.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +WSON NoLead +0 +13 +9 +Package_SON +WSON-8-1EP_3x2.5mm_P0.5mm_EP1.2x1.5mm_PullBack_ThermalVias +WSON, 8 Pin (http://www.ti.com/lit/ml/mpds400/mpds400.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +WSON NoLead +0 +18 +9 +Package_SON +WSON-8-1EP_3x3mm_P0.5mm_EP1.2x2mm +WSON, 8 Pin (http://www.ti.com/lit/ds/symlink/lp2951.pdf#page=27), generated with kicad-footprint-generator ipc_noLead_generator.py +WSON NoLead +0 +11 +9 +Package_SON +WSON-8-1EP_3x3mm_P0.5mm_EP1.2x2mm_ThermalVias +WSON, 8 Pin (http://www.ti.com/lit/ds/symlink/lp2951.pdf#page=27), generated with kicad-footprint-generator ipc_noLead_generator.py +WSON NoLead +0 +18 +9 +Package_SON +WSON-8-1EP_3x3mm_P0.5mm_EP1.6x2.0mm +8-Lead Plastic WSON, 2x2mm Body, 0.5mm Pitch, WSON-8, http://www.ti.com/lit/ds/symlink/lm27761.pdf +WSON 8 1EP +0 +13 +9 +Package_SON +WSON-8-1EP_3x3mm_P0.5mm_EP1.45x2.4mm +WSON, 8 Pin (https://www.ti.com/lit/ds/symlink/ina333.pdf#page=30), generated with kicad-footprint-generator ipc_noLead_generator.py +WSON NoLead +0 +11 +9 +Package_SON +WSON-8-1EP_3x3mm_P0.5mm_EP1.45x2.4mm_ThermalVias +WSON, 8 Pin (https://www.ti.com/lit/ds/symlink/ina333.pdf#page=30), generated with kicad-footprint-generator ipc_noLead_generator.py +WSON NoLead +0 +18 +9 +Package_SON +WSON-8-1EP_4x4mm_P0.8mm_EP1.98x3mm +WSON, 8 Pin (https://www.ti.com/lit/ds/symlink/lm5017.pdf#page=34), generated with kicad-footprint-generator ipc_noLead_generator.py +WSON NoLead +0 +13 +9 +Package_SON +WSON-8-1EP_4x4mm_P0.8mm_EP1.98x3mm_ThermalVias +WSON, 8 Pin (https://www.ti.com/lit/ds/symlink/lm5017.pdf#page=34), generated with kicad-footprint-generator ipc_noLead_generator.py +WSON NoLead +0 +17 +9 +Package_SON +WSON-8-1EP_4x4mm_P0.8mm_EP2.2x3mm +WSON, 8 Pin (https://www.ti.com/lit/ds/symlink/lp2987.pdf#page=26), generated with kicad-footprint-generator ipc_noLead_generator.py +WSON NoLead +0 +13 +9 +Package_SON +WSON-8-1EP_4x4mm_P0.8mm_EP2.2x3mm_ThermalVias +WSON, 8 Pin (https://www.ti.com/lit/ds/symlink/lp2987.pdf#page=26), generated with kicad-footprint-generator ipc_noLead_generator.py +WSON NoLead +0 +17 +9 +Package_SON +WSON-8-1EP_4x4mm_P0.8mm_EP2.6x3mm +WSON, 8 Pin (https://www.ti.com/lit/ds/symlink/lp2951-n.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +WSON NoLead +0 +13 +9 +Package_SON +WSON-8-1EP_4x4mm_P0.8mm_EP2.6x3mm_ThermalVias +WSON, 8 Pin (https://www.ti.com/lit/ds/symlink/lp2951-n.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +WSON NoLead +0 +17 +9 +Package_SON +WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4.3mm +WSON, 8 Pin (http://www.winbond.com/resource-files/w25q32jv%20revg%2003272018%20plus.pdf (page 68)), generated with kicad-footprint-generator ipc_noLead_generator.py +WSON NoLead +0 +13 +9 +Package_SON +WSON-8-1EP_6x5mm_P1.27mm_EP3.4x4mm +WSON, 8 Pin (http://ww1.microchip.com/downloads/en/AppNotes/S72030.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +WSON NoLead +0 +13 +9 +Package_SON +WSON-8-1EP_8x6mm_P1.27mm_EP3.4x4.3mm +WSON, 8 Pin (https://datasheet.lcsc.com/lcsc/2204011730_GigaDevice-Semicon-Beijing-GD5F1GQ4UFYIGR_C2986324.pdf (page 44)), generated with kicad-footprint-generator ipc_noLead_generator.py +WSON NoLead +0 +13 +9 +Package_SON +WSON-10-1EP_2.5x2.5mm_P0.5mm_EP1.2x2mm +WSON, 10 Pin (http://www.ti.com/lit/gpn/tps63030#page=24), generated with kicad-footprint-generator ipc_noLead_generator.py +WSON NoLead +0 +15 +11 +Package_SON +WSON-10-1EP_2.5x2.5mm_P0.5mm_EP1.2x2mm_ThermalVias +WSON, 10 Pin (http://www.ti.com/lit/gpn/tps63030#page=24), generated with kicad-footprint-generator ipc_noLead_generator.py +WSON NoLead +0 +22 +11 +Package_SON +WSON-10-1EP_2x3mm_P0.5mm_EP0.84x2.4mm +WSON-10 package 2x3mm body, pitch 0.5mm, see http://www.ti.com/lit/ds/symlink/tps62177.pdf +WSON 0.5 +0 +14 +11 +Package_SON +WSON-10-1EP_2x3mm_P0.5mm_EP0.84x2.4mm_ThermalVias +WSON-10 package 2x3mm body, pitch 0.5mm, thermal vias and counter-pad, see http://www.ti.com/lit/ds/symlink/tps62177.pdf +WSON 0.5 thermal vias +0 +17 +11 +Package_SON +WSON-10-1EP_4x3mm_P0.5mm_EP2.2x2mm +10-Lead Plastic WSON, 4x3mm Body, 0.5mm Pitch (http://www.ti.com/lit/ds/symlink/lm4990.pdf) +WSON 0.5 +0 +15 +11 +Package_SON +WSON-12-1EP_3x2mm_P0.5mm_EP1x2.65 +WSON-12 http://www.ti.com/lit/ds/symlink/lm27762.pdf +WSON-12 +0 +15 +13 +Package_SON +WSON-12-1EP_3x2mm_P0.5mm_EP1x2.65_ThermalVias +WSON-12 http://www.ti.com/lit/ds/symlink/lm27762.pdf +WSON-12 +0 +19 +13 +Package_SON +WSON-12-1EP_4x4mm_P0.5mm_EP2.6x3mm +WSON, 12 Pin (http://www.ti.com/lit/ds/symlink/ldc1312.pdf#page=62), generated with kicad-footprint-generator ipc_noLead_generator.py +WSON NoLead +0 +17 +13 +Package_SON +WSON-12-1EP_4x4mm_P0.5mm_EP2.6x3mm_ThermalVias +WSON, 12 Pin (http://www.ti.com/lit/ds/symlink/ldc1312.pdf#page=62), generated with kicad-footprint-generator ipc_noLead_generator.py +WSON NoLead +0 +27 +13 +Package_SON +WSON-14-1EP_4.0x4.0mm_P0.5mm_EP2.6x2.6mm +14-Lead Plastic Dual Flat, No Lead Package - 4.0x4.0x0.8 mm Body [WSON], http://www.ti.com/lit/ml/mpds421/mpds421.pdf +NHL014B +0 +19 +15 +Package_SON +WSON-16_3.3x1.35_P0.4mm +WSON-16 3.3 x 1.35mm Pitch 0.4mm http://www.chip.tomsk.ru/chip/chipdoc.nsf/Package/C67E729A4D6C883A4725793E004C8739!OpenDocument +WSON-16 3.3 x 1.35mm Pitch 0.4mm +0 +20 +17 +Package_SON +X2SON-8_1.4x1mm_P0.35mm +X2SON-8 1.4x1mm Pitch0.35mm http://www.ti.com/lit/ds/symlink/pca9306.pdf +X2SON-8 1.4x1mm Pitch0.35mm +0 +8 +8 +Package_SO_J-Lead +TSOC-6_3.76x3.94mm_P1.27mm +Maxim Integrated TSOC-6 D6+1,https://datasheets.maximintegrated.com/en/ds/DS2401.pdf, https://pdfserv.maximintegrated.com/land_patterns/90-0321.PDF +TSOC-6 +0 +6 +6 +Package_TO_SOT_SMD +ATPAK-2 +ATPAK SMD package, http://www.onsemi.com/pub/Collateral/ENA2192-D.PDF +ATPAK +0 +7 +3 +Package_TO_SOT_SMD +Analog_KS-4 +Analog Devices KS-4, http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/sc70ks/ks_4.pdf +Analog Devices KS-4 (like EIAJ SC-82) +0 +4 +4 +Package_TO_SOT_SMD +Diodes_SOT-553 +Diodes SOT-553, https://www.diodes.com/assets/Package-Files/SOT553.pdf +SOT-553 +0 +5 +5 +Package_TO_SOT_SMD +HVSOF5 +HVSOF5, http://rohmfs.rohm.com/en/techdata_basic/ic/package/hvsof5_1-e.pdf, http://rohmfs.rohm.com/en/products/databook/datasheet/ic/sensor/hall/bu52001gul-e.pdf +HVSOF5 +0 +5 +5 +Package_TO_SOT_SMD +HVSOF6 +HVSOF6, http://rohmfs.rohm.com/en/techdata_basic/ic/package/hvsof6_1-e.pdf, http://rohmfs.rohm.com/en/products/databook/datasheet/ic/audio_video/video_amplifier/bh76106hfv-e.pdf +HVSOF6 +0 +7 +7 +Package_TO_SOT_SMD +Infineon_PG-HDSOP-10-1 +Infineon PG-HDSOP-10-1 (DDPAK), 20.96x6.5x2.3mm, slug up (https://www.infineon.com/cms/en/product/packages/PG-HDSOP/PG-HDSOP-10-1/) +hdsop 10 ddpak +0 +10 +10 +Package_TO_SOT_SMD +Infineon_PG-HSOF-8-1 +HSOF-8-1 [TOLL] power MOSFET (http://www.infineon.com/cms/en/product/packages/PG-HSOF/PG-HSOF-8-1/) +mosfet hsof toll +0 +53 +3 +Package_TO_SOT_SMD +Infineon_PG-HSOF-8-1_ThermalVias +HSOF-8-1 [TOLL] power MOSFET (http://www.infineon.com/cms/en/product/packages/PG-HSOF/PG-HSOF-8-1/) +mosfet hsof toll thermal vias +0 +96 +3 +Package_TO_SOT_SMD +Infineon_PG-HSOF-8-2 +HSOF-8-2 [TOLL] power MOSFET (http://www.infineon.com/cms/en/product/packages/PG-HSOF/PG-HSOF-8-2/) +mosfet hsof toll +0 +12 +4 +Package_TO_SOT_SMD +Infineon_PG-HSOF-8-2_ThermalVias +HSOF-8-2 [TOLL] power MOSFET (http://www.infineon.com/cms/en/product/packages/PG-HSOF/PG-HSOF-8-2/) +mosfet hsof toll thermal vias +0 +97 +4 +Package_TO_SOT_SMD +Infineon_PG-HSOF-8-2_ThermalVias2 +HSOF-8-2 [TOLL] power MOSFET (http://www.infineon.com/cms/en/product/packages/PG-HSOF/PG-HSOF-8-2/, https://www.infineon.com/dgdl/Infineon-ApplicationNote_600V_CoolMOS_C7_Gold_TOLL-AN-v01_00-EN.pdf?fileId=5546d4625b10283a015b144a1af70df6) +mosfet hsof toll thermal vias +0 +159 +4 +Package_TO_SOT_SMD +Infineon_PG-HSOF-8-3 +HSOF-8-3 power MOSFET (http://www.infineon.com/cms/en/product/packages/PG-HSOF/PG-HSOF-8-3/) +mosfet hsof +0 +25 +4 +Package_TO_SOT_SMD +Infineon_PG-HSOF-8-3_ThermalVias +HSOF-8-3 power MOSFET (http://www.infineon.com/cms/en/product/packages/PG-HSOF/PG-HSOF-8-3/) +mosfet hsof +0 +64 +4 +Package_TO_SOT_SMD +Infineon_PG-TO-220-7Lead_TabPin8 +Infineon PG-TO-220-7, Tab as Pin 8, see e.g. https://www.infineon.com/dgdl/Infineon-BTS50055-1TMC-DS-v01_00-EN.pdf?fileId=5546d4625a888733015aa9b0007235e9 +Infineon PG-TO-220-7 +0 +12 +8 +Package_TO_SOT_SMD +Infineon_PG-TSFP-3-1 +Infineon_PG-TSFP-3-1, https://www.infineon.com/dgdl/TSFP-3-1,-2-Package_Overview.pdf?fileId=db3a30431936bc4b0119539929863d46 +TSFP-3 +0 +3 +3 +Package_TO_SOT_SMD +LFPAK33 +LFPAK33 SOT-1210 https://assets.nexperia.com/documents/outline-drawing/SOT1210.pdf +LFPAK33 SOT-1210 +0 +17 +5 +Package_TO_SOT_SMD +LFPAK56 +LFPAK56 https://assets.nexperia.com/documents/outline-drawing/SOT669.pdf +LFPAK56 SOT-669 Power-SO8 +0 +18 +5 +Package_TO_SOT_SMD +Nexperia_CFP15_SOT-1289 +Nexperia CFP15 (SOT-1289), https://assets.nexperia.com/documents/outline-drawing/SOT1289.pdf +SOT-1289 CFP15 +0 +8 +3 +Package_TO_SOT_SMD +OnSemi_ECH8 +On Semiconductor ECH8, https://www.onsemi.com/pub/Collateral/318BF.PDF +ECH8 SOT28-FL SOT-28-FL +0 +8 +8 +Package_TO_SOT_SMD +PQFN_8x8 +Low Profile 8x8mm PQFN, Dual Cool 88, https://www.onsemi.com/pub/Collateral/FDMT80080DC-D.pdf +pqfn vdfn mosfet +0 +9 +3 +Package_TO_SOT_SMD +PowerMacro_M234_NoHole +TO-50-4 Power Macro Package Style M234 +TO-50-4 Power Macro Package Style M234 +0 +4 +4 +Package_TO_SOT_SMD +PowerMacro_M234_WithHole +TO-50-4 Power Macro Package Style M234 +TO-50-4 Power Macro Package Style M234 +0 +4 +4 +Package_TO_SOT_SMD +Rohm_HRP7 +Rohm HRP7 SMD package, http://rohmfs.rohm.com/en/techdata_basic/ic/package/hrp7_1-e.pdf, http://rohmfs.rohm.com/en/products/databook/datasheet/ic/motor/dc/bd621x-e.pdf +Rohm HRP7 SMD +0 +69 +7 +Package_TO_SOT_SMD +SC-59 +SC-59, https://lib.chipdip.ru/images/import_diod/original/SOT-23_SC-59.jpg +SC-59 +0 +3 +3 +Package_TO_SOT_SMD +SC-59_Handsoldering +SC-59, hand-soldering varaint, https://lib.chipdip.ru/images/import_diod/original/SOT-23_SC-59.jpg +SC-59 hand-soldering +0 +3 +3 +Package_TO_SOT_SMD +SC-70-8 +SC70-8 +SC70-8 +0 +8 +8 +Package_TO_SOT_SMD +SC-70-8_Handsoldering +SC70-8, Handsoldering +SC70-8 Handsoldering +0 +8 +8 +Package_TO_SOT_SMD +SC-82AA +SC-82AA +SC-82AA +0 +4 +4 +Package_TO_SOT_SMD +SC-82AA_Handsoldering +SC-82AA +SC-82AA +0 +4 +4 +Package_TO_SOT_SMD +SC-82AB +SC-82AB +SC-82AB +0 +4 +4 +Package_TO_SOT_SMD +SC-82AB_Handsoldering +SC-82AB +SC-82AB +0 +4 +4 +Package_TO_SOT_SMD +SOT-23 +SOT, 3 Pin (https://www.jedec.org/system/files/docs/to-236h.pdf variant AB), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOT TO_SOT_SMD +0 +3 +3 +Package_TO_SOT_SMD +SOT-23-3 +SOT, 3 Pin (https://www.jedec.org/sites/default/files/docs/Mo-178D.PDF inferred 3-pin variant), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOT TO_SOT_SMD +0 +3 +3 +Package_TO_SOT_SMD +SOT-23-5 +SOT, 5 Pin (https://www.jedec.org/sites/default/files/docs/Mo-178c.PDF variant AA), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOT TO_SOT_SMD +0 +5 +5 +Package_TO_SOT_SMD +SOT-23-5_HandSoldering +5-pin SOT23 package +SOT-23-5 hand-soldering +0 +5 +5 +Package_TO_SOT_SMD +SOT-23-6 +SOT, 6 Pin (https://www.jedec.org/sites/default/files/docs/Mo-178c.PDF variant AB), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOT TO_SOT_SMD +0 +6 +6 +Package_TO_SOT_SMD +SOT-23-6_Handsoldering +6-pin SOT-23 package, Handsoldering +SOT-23-6 Handsoldering +0 +6 +6 +Package_TO_SOT_SMD +SOT-23-8 +SOT, 8 Pin (https://www.jedec.org/sites/default/files/docs/Mo-178c.PDF variant BA), generated with kicad-footprint-generator ipc_gullwing_generator.py +SOT TO_SOT_SMD +0 +8 +8 +Package_TO_SOT_SMD +SOT-23-8_Handsoldering +8-pin SOT-23 package, Handsoldering, http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/sot-23rj/rj_8.pdf +SOT-23-8 Handsoldering +0 +8 +8 +Package_TO_SOT_SMD +SOT-23W +SOT-23W http://www.allegromicro.com/~/media/Files/Datasheets/A112x-Datasheet.ashx?la=en&hash=7BC461E058CC246E0BAB62433B2F1ECA104CA9D3 +SOT-23W +0 +3 +3 +Package_TO_SOT_SMD +SOT-23W_Handsoldering +SOT-23W http://www.allegromicro.com/~/media/Files/Datasheets/A112x-Datasheet.ashx?la=en&hash=7BC461E058CC246E0BAB62433B2F1ECA104CA9D3 +SOT-23W for handsoldering +0 +3 +3 +Package_TO_SOT_SMD +SOT-23_Handsoldering +SOT-23, Handsoldering +SOT-23 +0 +3 +3 +Package_TO_SOT_SMD +SOT-89-3 +SOT-89-3, http://ww1.microchip.com/downloads/en/DeviceDoc/3L_SOT-89_MB_C04-029C.pdf +SOT-89-3 +0 +3 +3 +Package_TO_SOT_SMD +SOT-89-3_Handsoldering +SOT-89-3 Handsoldering +SOT-89-3 Handsoldering +0 +3 +3 +Package_TO_SOT_SMD +SOT-89-5 +SOT-89-5, http://www.e-devices.ricoh.co.jp/en/products/product_power/pkg/sot-89-5.pdf +SOT-89-5 +0 +5 +5 +Package_TO_SOT_SMD +SOT-89-5_Handsoldering +SOT-89-5, http://www.e-devices.ricoh.co.jp/en/products/product_power/pkg/sot-89-5.pdf +SOT-89-5 +0 +5 +5 +Package_TO_SOT_SMD +SOT-143 +SOT-143 https://www.nxp.com/docs/en/package-information/SOT143B.pdf +SOT-143 +0 +4 +4 +Package_TO_SOT_SMD +SOT-143R +SOT-143R, reverse pinning, https://www.nxp.com/docs/en/package-information/SOT143R.pdf +SOT-143R Reverse +0 +4 +4 +Package_TO_SOT_SMD +SOT-143R_Handsoldering +SOT-143R, reverse pinning, Handsoldering, https://www.nxp.com/docs/en/package-information/SOT143R.pdf +SOT-143 Reverse Handsoldering +0 +4 +4 +Package_TO_SOT_SMD +SOT-143_Handsoldering +SOT-143 Handsoldering https://www.nxp.com/docs/en/package-information/SOT143B.pdf +SOT-143 Handsoldering +0 +4 +4 +Package_TO_SOT_SMD +SOT-223 +module CMS SOT223 4 pins +CMS SOT +0 +4 +4 +Package_TO_SOT_SMD +SOT-223-3_TabPin2 +module CMS SOT223 4 pins +CMS SOT +0 +4 +3 +Package_TO_SOT_SMD +SOT-223-5 +module CMS SOT223 5 pins, http://ww1.microchip.com/downloads/en/DeviceDoc/51751a.pdf +CMS SOT +0 +5 +5 +Package_TO_SOT_SMD +SOT-223-6 +module CMS SOT223 6 pins, http://www.ti.com/lit/ds/symlink/tps737.pdf +CMS SOT +0 +6 +6 +Package_TO_SOT_SMD +SOT-223-6_TabPin3 +module CMS SOT223 6 pins, http://www.ti.com/lit/ds/symlink/tps737.pdf +CMS SOT +0 +6 +5 +Package_TO_SOT_SMD +SOT-223-8 +module CMS SOT223 8 pins, https://www.diodes.com/assets/Datasheets/ZXSBMR16PT8.pdf +CMS SOT +0 +8 +8 +Package_TO_SOT_SMD +SOT-323_SC-70 +SOT-323, SC-70 +SOT-323 SC-70 +0 +3 +3 +Package_TO_SOT_SMD +SOT-323_SC-70_Handsoldering +SOT-323, SC-70 Handsoldering +SOT-323 SC-70 Handsoldering +0 +3 +3 +Package_TO_SOT_SMD +SOT-343_SC-70-4 +SOT-343, SC-70-4 +SOT-343 SC-70-4 +0 +4 +4 +Package_TO_SOT_SMD +SOT-343_SC-70-4_Handsoldering +SOT-343, SC-70-4, Handsoldering +SOT-343 SC-70-4 Handsoldering +0 +4 +4 +Package_TO_SOT_SMD +SOT-353_SC-70-5 +SOT-353, SC-70-5 +SOT-353 SC-70-5 +0 +5 +5 +Package_TO_SOT_SMD +SOT-353_SC-70-5_Handsoldering +SOT-353, SC-70-5, Handsoldering +SOT-353 SC-70-5 Handsoldering +0 +5 +5 +Package_TO_SOT_SMD +SOT-363_SC-70-6 +SOT-363, SC-70-6 +SOT-363 SC-70-6 +0 +6 +6 +Package_TO_SOT_SMD +SOT-363_SC-70-6_Handsoldering +SOT-363, SC-70-6, Handsoldering +SOT-363 SC-70-6 Handsoldering +0 +6 +6 +Package_TO_SOT_SMD +SOT-383F +8-pin SOT-383F, http://www.mouser.com/ds/2/80/CPDVR085V0C-HF-RevB-10783.pdf +SOT-383F +0 +9 +9 +Package_TO_SOT_SMD +SOT-383FL +8-pin SOT-383FL package, http://www.onsemi.com/pub_link/Collateral/ENA2267-D.PDF +SOT-383FL +0 +8 +8 +Package_TO_SOT_SMD +SOT-416 +SOT-416, https://www.nxp.com/docs/en/package-information/SOT416.pdf +SOT-416 +0 +3 +3 +Package_TO_SOT_SMD +SOT-523 +SOT523, https://www.diodes.com/assets/Package-Files/SOT523.pdf +SOT-523 +0 +3 +3 +Package_TO_SOT_SMD +SOT-543 +SOT-543 4 lead surface package +SOT-543 SC-107A EMD4 +0 +4 +4 +Package_TO_SOT_SMD +SOT-553 +SOT553 +SOT-553 +0 +5 +5 +Package_TO_SOT_SMD +SOT-563 +SOT563 +SOT-563 +0 +6 +6 +Package_TO_SOT_SMD +SOT-583-8 +https://www.ti.com/lit/ds/symlink/tps62933.pdf +SOT-583-8 +0 +8 +8 +Package_TO_SOT_SMD +SOT-665 +SOT665 +SOT-665 +0 +5 +5 +Package_TO_SOT_SMD +SOT-666 +SOT666 +SOT-666 +0 +6 +6 +Package_TO_SOT_SMD +SOT-723 +http://toshiba.semicon-storage.com/info/docget.jsp?did=5879&prodName=RN1104MFV +sot 723 +0 +3 +3 +Package_TO_SOT_SMD +SOT-883 +SOT-883, https://assets.nexperia.com/documents/outline-drawing/SOT883.pdf +SOT-883 +0 +3 +3 +Package_TO_SOT_SMD +SOT-886 +SOT-886 +SOT-886 +0 +6 +6 +Package_TO_SOT_SMD +SOT-963 +SOT 963 6 pins package 1x0.8mm pitch 0.35mm +SOT 963 6 pins package 1x0.8mm pitch 0.35mm +0 +6 +6 +Package_TO_SOT_SMD +SOT-1123 +SOT-1123 small outline transistor (see http://www.onsemi.com/pub/Collateral/NST3906F3-D.PDF) +SOT-1123 transistor +0 +3 +3 +Package_TO_SOT_SMD +SOT-1333-1 +SOT-1333-1 +SOT-1333-1 +0 +9 +9 +Package_TO_SOT_SMD +SOT-1334-1 +SOT-1334-1 +SOT-1334-1 +0 +14 +14 +Package_TO_SOT_SMD +SuperSOT-3 +3-pin SuperSOT package https://www.fairchildsemi.com/package-drawings/MA/MA03B.pdf +SuperSOT-3 SSOT-3 +0 +3 +3 +Package_TO_SOT_SMD +SuperSOT-6 +6-pin SuperSOT package http://www.mouser.com/ds/2/149/FMB5551-889214.pdf +SuperSOT-6 SSOT-6 +0 +6 +6 +Package_TO_SOT_SMD +SuperSOT-8 +8-pin SuperSOT package, http://www.icbank.com/icbank_data/semi_package/ssot8_dim.pdf +SuperSOT-8 SSOT-8 +0 +8 +8 +Package_TO_SOT_SMD +TDSON-8-1 +Power MOSFET package, TDSON-8-1, 5.15x5.9mm (https://www.infineon.com/cms/en/product/packages/PG-TDSON/PG-TDSON-8-1/) +tdson +0 +14 +5 +Package_TO_SOT_SMD +TO-50-3_LongPad-NoHole_Housing +TO-50-3 Macro T Package Style M236 +TO-50-3 Macro T Package Style M236 +0 +3 +3 +Package_TO_SOT_SMD +TO-50-3_LongPad-WithHole_Housing +TO-50-3 Macro T Package Style M236 +TO-50-3 Macro T Package Style M236 +0 +3 +3 +Package_TO_SOT_SMD +TO-50-3_ShortPad-NoHole_Housing +TO-50-3 Macro T Package Style M236 +TO-50-3 Macro T Package Style M236 +0 +3 +3 +Package_TO_SOT_SMD +TO-50-3_ShortPad-WithHole_Housing +TO-50-3 Macro T Package Style M236 +TO-50-3 Macro T Package Style M236 +0 +3 +3 +Package_TO_SOT_SMD +TO-50-4_LongPad-NoHole_Housing +TO-50-4 Macro X Package Style M238 +TO-50-4 Macro X Package Style M238 +0 +4 +4 +Package_TO_SOT_SMD +TO-50-4_LongPad-WithHole_Housing +TO-50-4 Macro X Package Style M238 +TO-50-4 Macro X Package Style M238 +0 +4 +4 +Package_TO_SOT_SMD +TO-50-4_ShortPad-NoHole_Housing +TO-50-4 Macro X Package Style M238 +TO-50-4 Macro X Package Style M238 +0 +4 +4 +Package_TO_SOT_SMD +TO-50-4_ShortPad-WithHole_Housing +TO-50-4 Macro X Package Style M238 +TO-50-4 Macro X Package Style M238 +0 +4 +4 +Package_TO_SOT_SMD +TO-252-2 +TO-252/DPAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO252/PG-TO252-3-1/ +DPAK TO-252 DPAK-3 TO-252-3 SOT-428 +0 +7 +3 +Package_TO_SOT_SMD +TO-252-2_TabPin1 +TO-252-2, tab to pin 1 https://www.wolfspeed.com/media/downloads/87/CSD01060.pdf +TO-252-2 diode +0 +7 +2 +Package_TO_SOT_SMD +TO-252-3_TabPin2 +TO-252/DPAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO252/PG-TO252-3-1/ +DPAK TO-252 DPAK-3 TO-252-3 SOT-428 +0 +8 +3 +Package_TO_SOT_SMD +TO-252-3_TabPin4 +TO-252/DPAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO252/PG-TO252-3-1/ +DPAK TO-252 DPAK-3 TO-252-3 SOT-428 +0 +8 +4 +Package_TO_SOT_SMD +TO-252-4 +TO-252/DPAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO252/PG-TO252-5-11/ +DPAK TO-252 DPAK-5 TO-252-5 +0 +9 +5 +Package_TO_SOT_SMD +TO-252-5_TabPin3 +TO-252/DPAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO252/PG-TO252-5-11/ +DPAK TO-252 DPAK-5 TO-252-5 +0 +10 +5 +Package_TO_SOT_SMD +TO-252-5_TabPin6 +TO-252/DPAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO252/PG-TO252-5-11/ +DPAK TO-252 DPAK-5 TO-252-5 +0 +10 +6 +Package_TO_SOT_SMD +TO-263-2 +TO-263/D2PAK/DDPAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO263/PG-TO263-3-1/ +D2PAK DDPAK TO-263 D2PAK-3 TO-263-3 SOT-404 +0 +7 +3 +Package_TO_SOT_SMD +TO-263-2_TabPin1 +TO-263 / D2PAK / DDPAK SMD package, tab to pin 1, https://www.wolfspeed.com/media/downloads/137/C3D06060G.pdf +D2PAK DDPAK TO-263 D2PAK-3 TO-263-3 SOT-404 diode +0 +7 +2 +Package_TO_SOT_SMD +TO-263-3_TabPin2 +TO-263/D2PAK/DDPAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO263/PG-TO263-3-1/ +D2PAK DDPAK TO-263 D2PAK-3 TO-263-3 SOT-404 +0 +8 +3 +Package_TO_SOT_SMD +TO-263-3_TabPin4 +TO-263/D2PAK/DDPAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO263/PG-TO263-3-1/ +D2PAK DDPAK TO-263 D2PAK-3 TO-263-3 SOT-404 +0 +8 +4 +Package_TO_SOT_SMD +TO-263-4 +TO-263/D2PAK/DDPAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO263/PG-TO263-5-1/ +D2PAK DDPAK TO-263 D2PAK-5 TO-263-5 SOT-426 +0 +9 +5 +Package_TO_SOT_SMD +TO-263-5_TabPin3 +TO-263/D2PAK/DDPAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO263/PG-TO263-5-1/ +D2PAK DDPAK TO-263 D2PAK-5 TO-263-5 SOT-426 +0 +10 +5 +Package_TO_SOT_SMD +TO-263-5_TabPin6 +TO-263/D2PAK/DDPAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO263/PG-TO263-5-1/ +D2PAK DDPAK TO-263 D2PAK-5 TO-263-5 SOT-426 +0 +10 +6 +Package_TO_SOT_SMD +TO-263-6 +TO-263/D2PAK/DDPAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO263/PG-TO263-7-1/ +D2PAK DDPAK TO-263 D2PAK-7 TO-263-7 SOT-427 +0 +11 +7 +Package_TO_SOT_SMD +TO-263-7_TabPin4 +TO-263/D2PAK/DDPAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO263/PG-TO263-7-1/ +D2PAK DDPAK TO-263 D2PAK-7 TO-263-7 SOT-427 +0 +12 +7 +Package_TO_SOT_SMD +TO-263-7_TabPin8 +TO-263/D2PAK/DDPAK SMD package, http://www.infineon.com/cms/en/product/packages/PG-TO263/PG-TO263-7-1/ +D2PAK DDPAK TO-263 D2PAK-7 TO-263-7 SOT-427 +0 +12 +8 +Package_TO_SOT_SMD +TO-263-9_TabPin5 +TO-263 / D2PAK / DDPAK SMD package, http://www.ti.com/lit/ds/symlink/lm4755.pdf +D2PAK DDPAK TO-263 D2PAK-9 TO-263-9 +0 +14 +9 +Package_TO_SOT_SMD +TO-263-9_TabPin10 +TO-263 / D2PAK / DDPAK SMD package, http://www.ti.com/lit/ds/symlink/lm4755.pdf +D2PAK DDPAK TO-263 D2PAK-9 TO-263-9 +0 +14 +10 +Package_TO_SOT_SMD +TO-268-2 +TO-268/D3PAK SMD package, http://www.icbank.com/icbank_data/semi_package/to268aa_dim.pdf +D3PAK TO-268 D3PAK-3 TO-268-3 +0 +7 +3 +Package_TO_SOT_SMD +TO-269AA +SMD package TO-269AA (e.g. diode bridge), see http://www.vishay.com/docs/88854/padlayouts.pdf +TO-269AA MBS diode bridge +0 +4 +4 +Package_TO_SOT_SMD +TO-277A +Thermal enhanced ultra thin SMD package; 3 leads; body: 4.3x6.1x0.43mm, https://www.vishay.com/docs/95570/to-277asmpc.pdf +TO-277A SMPC +0 +12 +3 +Package_TO_SOT_SMD +TO-277B +TO-227B https://media.digikey.com/pdf/Data%20Sheets/Littelfuse%20PDFs/DST2050S.pdf +TO-277B +0 +9 +3 +Package_TO_SOT_SMD +TSOT-23 +3-pin TSOT23 package, http://www.analog.com.tw/pdf/All_In_One.pdf +TSOT-23 +0 +3 +3 +Package_TO_SOT_SMD +TSOT-23-5 +TSOT, 5 Pin (https://www.jedec.org/sites/default/files/docs/MO-193D.pdf variant AB), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSOT TO_SOT_SMD +0 +5 +5 +Package_TO_SOT_SMD +TSOT-23-5_HandSoldering +5-pin TSOT23 package, http://cds.linear.com/docs/en/packaging/SOT_5_05-08-1635.pdf +TSOT-23-5 Hand-soldering +0 +5 +5 +Package_TO_SOT_SMD +TSOT-23-6 +TSOT, 6 Pin (https://www.jedec.org/sites/default/files/docs/MO-193D.pdf variant AA), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSOT TO_SOT_SMD +0 +6 +6 +Package_TO_SOT_SMD +TSOT-23-6_HandSoldering +6-pin TSOT23 package, http://cds.linear.com/docs/en/packaging/SOT_6_05-08-1636.pdf +TSOT-23-6 MK06A TSOT-6 Hand-soldering +0 +6 +6 +Package_TO_SOT_SMD +TSOT-23-8 +TSOT, 8 Pin (https://www.jedec.org/sites/default/files/docs/MO-193D.pdf variant BA), generated with kicad-footprint-generator ipc_gullwing_generator.py +TSOT TO_SOT_SMD +0 +8 +8 +Package_TO_SOT_SMD +TSOT-23-8_HandSoldering +8-pin TSOT23 package, http://cds.linear.com/docs/en/packaging/SOT_8_05-08-1637.pdf +TSOT-23-8 Hand-soldering +0 +8 +8 +Package_TO_SOT_SMD +TSOT-23_HandSoldering +5-pin TSOT23 package, http://cds.linear.com/docs/en/packaging/SOT_5_05-08-1635.pdf +TSOT-23 Hand-soldering +0 +3 +3 +Package_TO_SOT_SMD +Texas_DRT-3 +Texas Instrument DRT-3 1x0.8mm Pitch 0.7mm http://www.ti.com/lit/ds/symlink/tpd2eusb30.pdf +DRT-3 1x0.8mm Pitch 0.7mm +0 +3 +3 +Package_TO_SOT_SMD +Texas_NDQ +Texas Instruments, NDQ, 5 pin (https://www.ti.com/lit/ml/mmsf022/mmsf022.pdf) +ti pfm dap +0 +6 +6 +Package_TO_SOT_SMD +Texas_NDW-7_TabPin4 +NDW0007A SMD package, http://www.ti.com/lit/ml/mmsf024/mmsf024.pdf +NDW NDW +0 +12 +7 +Package_TO_SOT_SMD +Texas_NDW-7_TabPin8 +NDW0007A SMD package, http://www.ti.com/lit/ml/mmsf024/mmsf024.pdf +NDW NDW +0 +12 +8 +Package_TO_SOT_SMD +Texas_NDY0011A +TO-PMOD-11 11-pin switching regulator package, http://www.ti.com/lit/ml/mmsf025/mmsf025.pdf +Texas TO-PMOD NDY00011A +0 +12 +12 +Package_TO_SOT_SMD +Texas_R-PDSO-G5_DCK-5 +DCK R-PDSO-G5, JEDEC MO-203C Var AA, https://www.ti.com/lit/ds/symlink/tmp20.pdf#page=23 +DCK R-PDSO-G5 MO-203C +0 +5 +5 +Package_TO_SOT_SMD +Texas_R-PDSO-G6 +R-PDSO-G6, http://www.ti.com/lit/ds/slis144b/slis144b.pdf +R-PDSO-G6 SC-70-6 +0 +6 +6 +Package_TO_SOT_SMD +Texas_R-PDSO-N5_DRL-5 +R-PDSO-N5, DRL, JEDEC MO-293B Var UAAD-1, https://www.ti.com/lit/ml/mpds158d/mpds158d.pdf +SOT R-PDSO-N5 DRL +0 +5 +5 +Package_TO_SOT_SMD +Texas_R-PDSO-N6_DRL-6 +R-PDSO-N6, DRL, similar to JEDEC MO-293B Var UAAD (but not the same) , https://www.ti.com/lit/pdf/mpds159f +SOT R-PDSO-N6 DRL +0 +6 +6 +Package_TO_SOT_SMD +VSOF5 +VSOF5 +VSOF5 +0 +5 +5 +Package_TO_SOT_SMD +Vishay_PowerPAK_SC70-6L_Dual +Vishay PowerPAK SC70 dual transistor package http://www.vishay.com/docs/70487/70487.pdf +powerpak sc70 sc-70 dual +0 +8 +6 +Package_TO_SOT_SMD +Vishay_PowerPAK_SC70-6L_Single +Vishay PowerPAK SC70 single transistor package http://www.vishay.com/docs/70486/70486.pdf +powerpak sc70 sc-70 +0 +6 +3 +Package_TO_SOT_THT +Analog_TO-46-4_ThermalShield +TO-46-4 with Valox case, based on https://www.analog.com/media/en/technical-documentation/data-sheets/199399fc.pdf +TO-46-4 LM399 +0 +4 +4 +Package_TO_SOT_THT +Fairchild_TO-220F-6L +Fairchild TO-220F-6L, http://www.mouser.com/ds/2/149/FSL136MRT-113334.pdf +Fairchild TO-220F-6L +0 +6 +6 +Package_TO_SOT_THT +Heraeus_TO-92-2 +TO-92 2-pin variant by Heraeus, drill 0.75mm (http://www.produktinfo.conrad.com/datenblaetter/175000-199999/181293-da-01-de-TO92_Temperatursensor_PT1000_32209225.pdf) +to-92 +0 +2 +2 +Package_TO_SOT_THT +NEC_Molded_7x4x9mm +Molded Japan Transistor Package 7x4x9mm^3, http://rtellason.com/transdata/2sb734.pdf +Japan transistor +0 +3 +3 +Package_TO_SOT_THT +PowerIntegrations_TO-220-7C +Non Isolated Modified TO-220 7pin Package, see http://www.farnell.com/datasheets/5793.pdf +Power Integration Y Package +0 +6 +6 +Package_TO_SOT_THT +SIPAK-1EP_Horizontal_TabDown +SIPAK, Horizontal, RM 2.286mm +SIPAK Horizontal RM 2.286mm +0 +4 +4 +Package_TO_SOT_THT +SIPAK_Vertical +SIPAK, Vertical, RM 2.286mm +SIPAK Vertical RM 2.286mm +0 +3 +3 +Package_TO_SOT_THT +SOD-70_P2.54mm +Plastic near cylindrical package Sod-70 see: https://www.nxp.com/docs/en/data-sheet/KTY81_SER.pdf [StepUp generated footprint] +Sod-70 +0 +2 +2 +Package_TO_SOT_THT +SOD-70_P5.08mm +Plastic near cylindrical package Sod-70 see: https://www.nxp.com/docs/en/data-sheet/KTY81_SER.pdf [StepUp generated footprint] +Sod-70 +0 +2 +2 +Package_TO_SOT_THT +SOT-227 +SOT-227 / SOT-227B / ISOTOP, M4 mounting screws (https://www.vishay.com/docs/95423/sot227g2.pdf, https://www.vishay.com/docs/95793/vs-fc420sa10.pdf) +sot 227 isotop +0 +8 +4 +Package_TO_SOT_THT +TO-3 +Transistor TO-3 +TR TO-3 TO3 TO-204 +0 +4 +3 +Package_TO_SOT_THT +TO-3P-3_Horizontal_TabDown +TO-3P-3, Horizontal, RM 5.45mm, , see https://toshiba.semicon-storage.com/ap-en/design-support/package/detail.TO-3P(N).html +TO-3P-3 Horizontal RM 5.45mm +0 +3 +3 +Package_TO_SOT_THT +TO-3P-3_Horizontal_TabUp +TO-3P-3, Horizontal, RM 5.45mm, , see https://toshiba.semicon-storage.com/ap-en/design-support/package/detail.TO-3P(N).html +TO-3P-3 Horizontal RM 5.45mm +0 +3 +3 +Package_TO_SOT_THT +TO-3P-3_Vertical +TO-3P-3, Vertical, RM 5.45mm, , see https://toshiba.semicon-storage.com/ap-en/design-support/package/detail.TO-3P(N).html +TO-3P-3 Vertical RM 5.45mm +0 +3 +3 +Package_TO_SOT_THT +TO-3PB-3_Horizontal_TabDown +TO-3PB-3, Horizontal, RM 5.45mm, , see http://www.onsemi.com/pub/Collateral/340AC.PDF +TO-3PB-3 Horizontal RM 5.45mm +0 +3 +3 +Package_TO_SOT_THT +TO-3PB-3_Horizontal_TabUp +TO-3PB-3, Horizontal, RM 5.45mm, , see http://www.onsemi.com/pub/Collateral/340AC.PDF +TO-3PB-3 Horizontal RM 5.45mm +0 +3 +3 +Package_TO_SOT_THT +TO-3PB-3_Vertical +TO-3PB-3, Vertical, RM 5.45mm, , see http://www.onsemi.com/pub/Collateral/340AC.PDF +TO-3PB-3 Vertical RM 5.45mm +0 +3 +3 +Package_TO_SOT_THT +TO-5-2 +TO-5-2 +TO-5-2 +0 +2 +2 +Package_TO_SOT_THT +TO-5-2_Window +TO-5-2_Window, Window +TO-5-2_Window Window +0 +2 +2 +Package_TO_SOT_THT +TO-5-3 +TO-5-3 +TO-5-3 +0 +3 +3 +Package_TO_SOT_THT +TO-5-3_Window +TO-5-3_Window, Window +TO-5-3_Window Window +0 +3 +3 +Package_TO_SOT_THT +TO-5-4 +TO-5-4 +TO-5-4 +0 +4 +4 +Package_TO_SOT_THT +TO-5-4_Window +TO-5-4_Window, Window +TO-5-4_Window Window +0 +4 +4 +Package_TO_SOT_THT +TO-5-6 +TO-5-6 +TO-5-6 +0 +6 +6 +Package_TO_SOT_THT +TO-5-6_Window +TO-5-6_Window, Window +TO-5-6_Window Window +0 +6 +6 +Package_TO_SOT_THT +TO-5-8 +TO-5-8 +TO-5-8 +0 +8 +8 +Package_TO_SOT_THT +TO-5-8_PD5.08 +TO-5-8_PD5.08 +TO-5-8_PD5.08 +0 +8 +8 +Package_TO_SOT_THT +TO-5-8_PD5.08_Window +TO-5-8_PD5.08_Window, Window +TO-5-8_PD5.08_Window Window +0 +8 +8 +Package_TO_SOT_THT +TO-5-8_Window +TO-5-8_Window, Window +TO-5-8_Window Window +0 +8 +8 +Package_TO_SOT_THT +TO-5-10 +TO-5-10 +TO-5-10 +0 +10 +10 +Package_TO_SOT_THT +TO-5-10_Window +TO-5-10_Window, Window +TO-5-10_Window Window +0 +10 +10 +Package_TO_SOT_THT +TO-8-2 +TO-8-2 +TO-8-2 +0 +2 +2 +Package_TO_SOT_THT +TO-8-2_Window +TO-8-2_Window, Window +TO-8-2_Window Window +0 +2 +2 +Package_TO_SOT_THT +TO-8-3 +TO-8-3 +TO-8-3 +0 +3 +3 +Package_TO_SOT_THT +TO-8-3_Window +TO-8-3_Window, Window +TO-8-3_Window Window +0 +3 +3 +Package_TO_SOT_THT +TO-11-2 +TO-11-2 +TO-11-2 +0 +2 +2 +Package_TO_SOT_THT +TO-11-2_Window +TO-11-2_Window, Window +TO-11-2_Window Window +0 +2 +2 +Package_TO_SOT_THT +TO-11-3 +TO-11-3 +TO-11-3 +0 +3 +3 +Package_TO_SOT_THT +TO-11-3_Window +TO-11-3_Window, Window +TO-11-3_Window Window +0 +3 +3 +Package_TO_SOT_THT +TO-12-4 +TO-12-4 +TO-12-4 +0 +4 +4 +Package_TO_SOT_THT +TO-12-4_Window +TO-12-4_Window, Window +TO-12-4_Window Window +0 +4 +4 +Package_TO_SOT_THT +TO-17-4 +TO-17-4 +TO-17-4 +0 +4 +4 +Package_TO_SOT_THT +TO-17-4_Window +TO-17-4_Window, Window +TO-17-4_Window Window +0 +4 +4 +Package_TO_SOT_THT +TO-18-2 +TO-18-2 +TO-18-2 +0 +2 +2 +Package_TO_SOT_THT +TO-18-2_Lens +TO-18-2_Lens, Lens +TO-18-2_Lens Lens +0 +2 +2 +Package_TO_SOT_THT +TO-18-2_Window +TO-18-2_Window, Window +TO-18-2_Window Window +0 +2 +2 +Package_TO_SOT_THT +TO-18-3 +TO-18-3 +TO-18-3 +0 +3 +3 +Package_TO_SOT_THT +TO-18-3_Lens +TO-18-3_Lens, Lens +TO-18-3_Lens Lens +0 +3 +3 +Package_TO_SOT_THT +TO-18-3_Window +TO-18-3_Window, Window +TO-18-3_Window Window +0 +3 +3 +Package_TO_SOT_THT +TO-18-4 +TO-18-4 +TO-18-4 +0 +4 +4 +Package_TO_SOT_THT +TO-18-4_Lens +TO-18-4_Lens, Lens +TO-18-4_Lens Lens +0 +4 +4 +Package_TO_SOT_THT +TO-18-4_Window +TO-18-4_Window, Window +TO-18-4_Window Window +0 +4 +4 +Package_TO_SOT_THT +TO-33-4 +TO-33-4 +TO-33-4 +0 +4 +4 +Package_TO_SOT_THT +TO-33-4_Window +TO-33-4_Window, Window +TO-33-4_Window Window +0 +4 +4 +Package_TO_SOT_THT +TO-38-2 +TO-38-2 +TO-38-2 +0 +2 +2 +Package_TO_SOT_THT +TO-38-2_Window +TO-38-2_Window, Window +TO-38-2_Window Window +0 +2 +2 +Package_TO_SOT_THT +TO-38-3 +TO-38-3 +TO-38-3 +0 +3 +3 +Package_TO_SOT_THT +TO-38-3_Window +TO-38-3_Window, Window +TO-38-3_Window Window +0 +3 +3 +Package_TO_SOT_THT +TO-39-2 +TO-39-2 +TO-39-2 +0 +2 +2 +Package_TO_SOT_THT +TO-39-2_Window +TO-39-2_Window, Window +TO-39-2_Window Window +0 +2 +2 +Package_TO_SOT_THT +TO-39-3 +TO-39-3 +TO-39-3 +0 +3 +3 +Package_TO_SOT_THT +TO-39-3_Window +TO-39-3_Window, Window +TO-39-3_Window Window +0 +3 +3 +Package_TO_SOT_THT +TO-39-4 +TO-39-4 +TO-39-4 +0 +4 +4 +Package_TO_SOT_THT +TO-39-4_Window +TO-39-4_Window, Window +TO-39-4_Window Window +0 +4 +4 +Package_TO_SOT_THT +TO-39-6 +TO-39-6 +TO-39-6 +0 +6 +6 +Package_TO_SOT_THT +TO-39-6_Window +TO-39-6_Window, Window +TO-39-6_Window Window +0 +6 +6 +Package_TO_SOT_THT +TO-39-8 +TO-39-8 +TO-39-8 +0 +8 +8 +Package_TO_SOT_THT +TO-39-8_Window +TO-39-8_Window, Window +TO-39-8_Window Window +0 +8 +8 +Package_TO_SOT_THT +TO-39-10 +TO-39-10 +TO-39-10 +0 +10 +10 +Package_TO_SOT_THT +TO-39-10_Window +TO-39-10_Window, Window +TO-39-10_Window Window +0 +10 +10 +Package_TO_SOT_THT +TO-46-2 +TO-46-2 +TO-46-2 +0 +2 +2 +Package_TO_SOT_THT +TO-46-2_Pin2Center +TO-46-2, Pin2 at center of package, Thorlabs photodiodes +TO-46-2 Thorlabs +0 +2 +2 +Package_TO_SOT_THT +TO-46-2_Pin2Center_Window +TO-46-2, Pin2 at center of package, Thorlabs photodiodes +TO-46-2 Thorlabs +0 +2 +2 +Package_TO_SOT_THT +TO-46-2_Window +TO-46-2_Window, Window +TO-46-2_Window Window +0 +2 +2 +Package_TO_SOT_THT +TO-46-3 +TO-46-3 +TO-46-3 +0 +3 +3 +Package_TO_SOT_THT +TO-46-3_Pin2Center +TO-46-3, Pin2 at center of package, Thorlabs photodiodes, https://www.thorlabs.de/drawings/374b6862eb3b5a04-9360B5F6-5056-2306-D912111C06C3F830/FDGA05-SpecSheet.pdf +TO-46-3 Thorlabs +0 +3 +3 +Package_TO_SOT_THT +TO-46-3_Pin2Center_Window +TO-46-3, Pin2 at center of package, Thorlabs photodiodes, https://www.thorlabs.de/drawings/374b6862eb3b5a04-9360B5F6-5056-2306-D912111C06C3F830/FDGA05-SpecSheet.pdf +TO-46-3 Thorlabs +0 +3 +3 +Package_TO_SOT_THT +TO-46-3_Window +TO-46-3_Window, Window +TO-46-3_Window Window +0 +3 +3 +Package_TO_SOT_THT +TO-46-4 +TO-46-4 +TO-46-4 +0 +4 +4 +Package_TO_SOT_THT +TO-46-4_Window +TO-46-4_Window, Window +TO-46-4_Window Window +0 +4 +4 +Package_TO_SOT_THT +TO-52-2 +TO-52-2 +TO-52-2 +0 +2 +2 +Package_TO_SOT_THT +TO-52-2_Window +TO-52-2_Window, Window +TO-52-2_Window Window +0 +2 +2 +Package_TO_SOT_THT +TO-52-3 +TO-52-3 +TO-52-3 +0 +3 +3 +Package_TO_SOT_THT +TO-52-3_Window +TO-52-3_Window, Window +TO-52-3_Window Window +0 +3 +3 +Package_TO_SOT_THT +TO-72-4 +TO-72-4 +TO-72-4 +0 +4 +4 +Package_TO_SOT_THT +TO-72-4_Window +TO-72-4_Window, Window +TO-72-4_Window Window +0 +4 +4 +Package_TO_SOT_THT +TO-75-6 +TO-75-6 +TO-75-6 +0 +6 +6 +Package_TO_SOT_THT +TO-75-6_Window +TO-75-6_Window, Window +TO-75-6_Window Window +0 +6 +6 +Package_TO_SOT_THT +TO-78-6 +TO-78-6 +TO-78-6 +0 +6 +6 +Package_TO_SOT_THT +TO-78-6_Window +TO-78-6_Window, Window +TO-78-6_Window Window +0 +6 +6 +Package_TO_SOT_THT +TO-78-8 +TO-78-8 +TO-78-8 +0 +8 +8 +Package_TO_SOT_THT +TO-78-8_Window +TO-78-8_Window, Window +TO-78-8_Window Window +0 +8 +8 +Package_TO_SOT_THT +TO-78-10 +TO-78-10 +TO-78-10 +0 +10 +10 +Package_TO_SOT_THT +TO-78-10_Window +TO-78-10_Window, Window +TO-78-10_Window Window +0 +10 +10 +Package_TO_SOT_THT +TO-92 +TO-92 leads molded, narrow, drill 0.75mm (see NXP sot054_po.pdf) +to-92 sc-43 sc-43a sot54 PA33 transistor +0 +3 +3 +Package_TO_SOT_THT +TO-92-2 +TO-92 2-pin leads in-line, narrow, oval pads, drill 0.75mm (see NXP sot054_po.pdf) +to-92 sc-43 sc-43a sot54 PA33 diode SOD70 +0 +2 +2 +Package_TO_SOT_THT +TO-92-2_Horizontal1 +2-pin TO-92 horizontal, leads molded, narrow, drill 0.75mm (see NXP sot054_po.pdf) +to-92 sc-43 sc-43a sot54 PA33 temperature sensor diode +0 +2 +2 +Package_TO_SOT_THT +TO-92-2_Horizontal2 +2-pin TO-92 horizontal, leads molded, narrow, drill 0.75mm (see NXP sot054_po.pdf) +to-92 sc-43 sc-43a sot54 PA33 temperature sensor diode +0 +2 +2 +Package_TO_SOT_THT +TO-92-2_W4.0mm_Horizontal_FlatSideDown +TO-92 horizontal, leads in-line, narrow, oval pads, drill 0.75mm (see NXP sot054_po.pdf) +to-92 sc-43 sc-43a sot54 PA33 transistor +0 +2 +2 +Package_TO_SOT_THT +TO-92-2_W4.0mm_Horizontal_FlatSideUp +TO-92 horizontal, leads in-line, narrow, oval pads, drill 0.75mm (see NXP sot054_po.pdf) +to-92 sc-43 sc-43a sot54 PA33 transistor +0 +2 +2 +Package_TO_SOT_THT +TO-92-2_Wide +TO-92 2-pin leads in-line, wide, drill 0.75mm +to-92 sc-43 sc-43a sot54 PA33 diode SOD70 +0 +2 +2 +Package_TO_SOT_THT +TO-92Flat +TO-92Flat package, often used for hall sensors, drill 0.75mm (see e.g. http://www.ti.com/lit/ds/symlink/drv5023.pdf) +to-92Flat hall sensor +0 +3 +3 +Package_TO_SOT_THT +TO-92L +TO-92L leads in-line (large body variant of TO-92), also known as TO-226, wide, drill 0.75mm (see https://www.diodes.com/assets/Package-Files/TO92L.pdf and http://www.ti.com/lit/an/snoa059/snoa059.pdf) +TO-92L Molded Narrow transistor +0 +3 +3 +Package_TO_SOT_THT +TO-92L_HandSolder +TO-92L leads in-line (large body variant of TO-92), also known as TO-226, wide, drill 0.75mm, hand-soldering variant with enlarged pads (see https://www.diodes.com/assets/Package-Files/TO92L.pdf and http://www.ti.com/lit/an/snoa059/snoa059.pdf) +to-92 sc-43 sc-43a sot54 PA33 transistor +0 +3 +3 +Package_TO_SOT_THT +TO-92L_Inline +TO-92L leads in-line (large body variant of TO-92), also known as TO-226, wide, drill 0.75mm (see https://www.diodes.com/assets/Package-Files/TO92L.pdf and http://www.ti.com/lit/an/snoa059/snoa059.pdf) +TO-92L Inline Wide transistor +0 +3 +3 +Package_TO_SOT_THT +TO-92L_Inline_Wide +TO-92L leads in-line (large body variant of TO-92), also known as TO-226, wide, drill 0.75mm (see https://www.diodes.com/assets/Package-Files/TO92L.pdf and http://www.ti.com/lit/an/snoa059/snoa059.pdf) +TO-92L Inline Wide transistor +0 +3 +3 +Package_TO_SOT_THT +TO-92L_Wide +TO-92L leads in-line (large body variant of TO-92), also known as TO-226, wide, drill 0.75mm (see https://www.diodes.com/assets/Package-Files/TO92L.pdf and http://www.ti.com/lit/an/snoa059/snoa059.pdf) +TO-92L Molded Wide transistor +0 +3 +3 +Package_TO_SOT_THT +TO-92Mini-2 +TO-92Mini package, drill 0.6mm (https://media.digikey.com/pdf/Data%20Sheets/Infineon%20PDFs/KT,KTY.pdf) +to-92Mini transistor +0 +2 +2 +Package_TO_SOT_THT +TO-92S +TO-92S package, drill 0.75mm (https://www.diodes.com/assets/Package-Files/TO92S%20(Type%20B).pdf) +to-92S transistor +0 +3 +3 +Package_TO_SOT_THT +TO-92S-2 +TO-92S package, 2-pin, drill 0.75mm (https://www.diodes.com/assets/Package-Files/TO92S%20(Type%20B).pdf) +to-92S transistor +0 +2 +2 +Package_TO_SOT_THT +TO-92S_Wide +TO-92S_Wide package, drill 0.75mm (https://www.diodes.com/assets/Package-Files/TO92S%20(Type%20B).pdf) +TO-92S_Wide transistor +0 +3 +3 +Package_TO_SOT_THT +TO-92_HandSolder +TO-92 leads molded, narrow, drill 0.75mm, handsoldering variant with enlarged pads (see NXP sot054_po.pdf) +to-92 sc-43 sc-43a sot54 PA33 transistor +0 +3 +3 +Package_TO_SOT_THT +TO-92_Horizontal1 +TO-92 horizontal, leads molded, narrow, drill 0.75mm (see NXP sot054_po.pdf) +to-92 sc-43 sc-43a sot54 PA33 transistor +0 +3 +3 +Package_TO_SOT_THT +TO-92_Horizontal2 +TO-92 horizontal, leads molded, narrow, drill 0.75mm (see NXP sot054_po.pdf) +to-92 sc-43 sc-43a sot54 PA33 transistor +0 +3 +3 +Package_TO_SOT_THT +TO-92_Inline +TO-92 leads in-line, narrow, oval pads, drill 0.75mm (see NXP sot054_po.pdf) +to-92 sc-43 sc-43a sot54 PA33 transistor +0 +3 +3 +Package_TO_SOT_THT +TO-92_Inline_Horizontal1 +TO-92 horizontal, leads in-line, narrow, oval pads, drill 0.75mm (see NXP sot054_po.pdf) +to-92 sc-43 sc-43a sot54 PA33 transistor +0 +3 +3 +Package_TO_SOT_THT +TO-92_Inline_Horizontal2 +TO-92 horizontal, leads in-line, narrow, oval pads, drill 0.75mm (see NXP sot054_po.pdf) +to-92 sc-43 sc-43a sot54 PA33 transistor +0 +3 +3 +Package_TO_SOT_THT +TO-92_Inline_W4.0mm_Horizontal_FlatSideDown +TO-92 horizontal, leads in-line, narrow, oval pads, drill 0.75mm (see NXP sot054_po.pdf) +to-92 sc-43 sc-43a sot54 PA33 transistor +0 +3 +3 +Package_TO_SOT_THT +TO-92_Inline_W4.0mm_Horizontal_FlatSideUp +TO-92 horizontal, leads in-line, narrow, oval pads, drill 0.75mm (see NXP sot054_po.pdf) +to-92 sc-43 sc-43a sot54 PA33 transistor +0 +3 +3 +Package_TO_SOT_THT +TO-92_Inline_Wide +TO-92 leads in-line, wide, drill 0.75mm (see NXP sot054_po.pdf) +to-92 sc-43 sc-43a sot54 PA33 transistor +0 +3 +3 +Package_TO_SOT_THT +TO-92_W4.0mm_StaggerEven_Horizontal_FlatSideDown +TO-92 horizontal, leads molded, narrow, drill 0.75mm (see NXP sot054_po.pdf) +to-92 sc-43 sc-43a sot54 PA33 transistor +0 +3 +3 +Package_TO_SOT_THT +TO-92_W4.0mm_StaggerEven_Horizontal_FlatSideUp +TO-92 horizontal, leads molded, narrow, drill 0.75mm (see NXP sot054_po.pdf) +to-92 sc-43 sc-43a sot54 PA33 transistor +0 +3 +3 +Package_TO_SOT_THT +TO-92_Wide +TO-92 leads molded, wide, drill 0.75mm (see NXP sot054_po.pdf) +to-92 sc-43 sc-43a sot54 PA33 transistor +0 +3 +3 +Package_TO_SOT_THT +TO-99-6 +TO-99-6 +TO-99-6 +0 +6 +6 +Package_TO_SOT_THT +TO-99-6_Window +TO-99-6_Window, Window +TO-99-6_Window Window +0 +6 +6 +Package_TO_SOT_THT +TO-99-8 +TO-99-8 +TO-99-8 +0 +8 +8 +Package_TO_SOT_THT +TO-99-8_Window +TO-99-8_Window, Window +TO-99-8_Window Window +0 +8 +8 +Package_TO_SOT_THT +TO-100-10 +TO-100-10 +TO-100-10 +0 +10 +10 +Package_TO_SOT_THT +TO-100-10_Window +TO-100-10_Window, Window +TO-100-10_Window Window +0 +10 +10 +Package_TO_SOT_THT +TO-126-2_Horizontal_TabDown +TO-126-2, Horizontal, RM 5.08mm, see https://www.diodes.com/assets/Package-Files/TO126.pdf +TO-126-2 Horizontal RM 5.08mm +0 +2 +2 +Package_TO_SOT_THT +TO-126-2_Horizontal_TabUp +TO-126-2, Horizontal, RM 5.08mm, see https://www.diodes.com/assets/Package-Files/TO126.pdf +TO-126-2 Horizontal RM 5.08mm +0 +2 +2 +Package_TO_SOT_THT +TO-126-2_Vertical +TO-126-2, Vertical, RM 5.08mm, see https://www.diodes.com/assets/Package-Files/TO126.pdf +TO-126-2 Vertical RM 5.08mm +0 +2 +2 +Package_TO_SOT_THT +TO-126-3_Horizontal_TabDown +TO-126-3, Horizontal, RM 2.54mm, see https://www.diodes.com/assets/Package-Files/TO126.pdf +TO-126-3 Horizontal RM 2.54mm +0 +3 +3 +Package_TO_SOT_THT +TO-126-3_Horizontal_TabUp +TO-126-3, Horizontal, RM 2.54mm, see https://www.diodes.com/assets/Package-Files/TO126.pdf +TO-126-3 Horizontal RM 2.54mm +0 +3 +3 +Package_TO_SOT_THT +TO-126-3_Vertical +TO-126-3, Vertical, RM 2.54mm, see https://www.diodes.com/assets/Package-Files/TO126.pdf +TO-126-3 Vertical RM 2.54mm +0 +3 +3 +Package_TO_SOT_THT +TO-218-2_Horizontal_TabDown +TO-218-2, Horizontal, RM 10.95mm, SOT-93, see https://www.vishay.com/docs/95214/fto218.pdf +TO-218-2 Horizontal RM 10.95mm SOT-93 +0 +2 +2 +Package_TO_SOT_THT +TO-218-2_Horizontal_TabUp +TO-218-2, Horizontal, RM 10.95mm, SOT-93, see https://www.vishay.com/docs/95214/fto218.pdf +TO-218-2 Horizontal RM 10.95mm SOT-93 +0 +2 +2 +Package_TO_SOT_THT +TO-218-2_Vertical +TO-218-2, Vertical, RM 10.95mm, SOT-93, see https://www.vishay.com/docs/95214/fto218.pdf +TO-218-2 Vertical RM 10.95mm SOT-93 +0 +2 +2 +Package_TO_SOT_THT +TO-218-3_Horizontal_TabDown +TO-218-3, Horizontal, RM 5.475mm, SOT-93, see https://www.vishay.com/docs/95214/fto218.pdf +TO-218-3 Horizontal RM 5.475mm SOT-93 +0 +3 +3 +Package_TO_SOT_THT +TO-218-3_Horizontal_TabUp +TO-218-3, Horizontal, RM 5.475mm, SOT-93, see https://www.vishay.com/docs/95214/fto218.pdf +TO-218-3 Horizontal RM 5.475mm SOT-93 +0 +3 +3 +Package_TO_SOT_THT +TO-218-3_Vertical +TO-218-3, Vertical, RM 5.475mm, SOT-93, see https://www.vishay.com/docs/95214/fto218.pdf +TO-218-3 Vertical RM 5.475mm SOT-93 +0 +3 +3 +Package_TO_SOT_THT +TO-220-2_Horizontal_TabDown +TO-220-2, Horizontal, RM 5.08mm, see https://www.centralsemi.com/PDFS/CASE/TO-220-2PD.PDF +TO-220-2 Horizontal RM 5.08mm +0 +2 +2 +Package_TO_SOT_THT +TO-220-2_Horizontal_TabUp +TO-220-2, Horizontal, RM 5.08mm, see https://www.centralsemi.com/PDFS/CASE/TO-220-2PD.PDF +TO-220-2 Horizontal RM 5.08mm +0 +2 +2 +Package_TO_SOT_THT +TO-220-2_Vertical +TO-220-2, Vertical, RM 5.08mm, see https://www.centralsemi.com/PDFS/CASE/TO-220-2PD.PDF +TO-220-2 Vertical RM 5.08mm +0 +2 +2 +Package_TO_SOT_THT +TO-220-3_Horizontal_TabDown +TO-220-3, Horizontal, RM 2.54mm, see https://www.vishay.com/docs/66542/to-220-1.pdf +TO-220-3 Horizontal RM 2.54mm +0 +3 +3 +Package_TO_SOT_THT +TO-220-3_Horizontal_TabUp +TO-220-3, Horizontal, RM 2.54mm, see https://www.vishay.com/docs/66542/to-220-1.pdf +TO-220-3 Horizontal RM 2.54mm +0 +3 +3 +Package_TO_SOT_THT +TO-220-3_Vertical +TO-220-3, Vertical, RM 2.54mm, see https://www.vishay.com/docs/66542/to-220-1.pdf +TO-220-3 Vertical RM 2.54mm +0 +3 +3 +Package_TO_SOT_THT +TO-220-4_Horizontal_TabDown +TO-220-4, Horizontal, RM 2.54mm +TO-220-4 Horizontal RM 2.54mm +0 +4 +4 +Package_TO_SOT_THT +TO-220-4_Horizontal_TabUp +TO-220-4, Horizontal, RM 2.54mm +TO-220-4 Horizontal RM 2.54mm +0 +4 +4 +Package_TO_SOT_THT +TO-220-4_P5.08x2.54mm_StaggerEven_Lead3.8mm_Vertical +TO-220-4, Vertical, RM 2.54mm, staggered type-2 +TO-220-4 Vertical RM 2.54mm staggered type-2 +0 +4 +4 +Package_TO_SOT_THT +TO-220-4_P5.08x2.54mm_StaggerEven_Lead5.84mm_TabDown +TO-220-4, Horizontal, RM 2.54mm, staggered type-2 +TO-220-4 Horizontal RM 2.54mm staggered type-2 +0 +4 +4 +Package_TO_SOT_THT +TO-220-4_P5.08x2.54mm_StaggerOdd_Lead3.8mm_Vertical +TO-220-4, Vertical, RM 2.54mm, staggered type-1 +TO-220-4 Vertical RM 2.54mm staggered type-1 +0 +4 +4 +Package_TO_SOT_THT +TO-220-4_P5.08x2.54mm_StaggerOdd_Lead5.84mm_TabDown +TO-220-4, Horizontal, RM 2.54mm, staggered type-1 +TO-220-4 Horizontal RM 2.54mm staggered type-1 +0 +4 +4 +Package_TO_SOT_THT +TO-220-4_Vertical +TO-220-4, Vertical, RM 2.54mm +TO-220-4 Vertical RM 2.54mm +0 +4 +4 +Package_TO_SOT_THT +TO-220-5_Horizontal_TabDown +TO-220-5, Horizontal, RM 1.7mm, Pentawatt, Multiwatt-5, see http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-to-220/to-220_5_05-08-1421_straight_lead.pdf +TO-220-5 Horizontal RM 1.7mm Pentawatt Multiwatt-5 +0 +5 +5 +Package_TO_SOT_THT +TO-220-5_Horizontal_TabUp +TO-220-5, Horizontal, RM 1.7mm, Pentawatt, Multiwatt-5, see http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-to-220/to-220_5_05-08-1421_straight_lead.pdf +TO-220-5 Horizontal RM 1.7mm Pentawatt Multiwatt-5 +0 +5 +5 +Package_TO_SOT_THT +TO-220-5_P3.4x3.7mm_StaggerEven_Lead3.8mm_Vertical +TO-220-5, Vertical, RM 1.7mm, Pentawatt, Multiwatt-5, staggered type-2, see http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-to-220/to-220_5_05-08-1421.pdf?domain=www.linear.com, https://www.diodes.com/assets/Package-Files/TO220-5.pdf +TO-220-5 Vertical RM 1.7mm Pentawatt Multiwatt-5 staggered type-2 +0 +5 +5 +Package_TO_SOT_THT +TO-220-5_P3.4x3.7mm_StaggerOdd_Lead3.8mm_Vertical +TO-220-5, Vertical, RM 1.7mm, Pentawatt, Multiwatt-5, staggered type-1, see http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-to-220/to-220_5_05-08-1421.pdf?domain=www.linear.com, https://www.diodes.com/assets/Package-Files/TO220-5.pdf +TO-220-5 Vertical RM 1.7mm Pentawatt Multiwatt-5 staggered type-1 +0 +5 +5 +Package_TO_SOT_THT +TO-220-5_P3.4x3.8mm_StaggerEven_Lead7.13mm_TabDown +TO-220-5, Horizontal, RM 1.7mm, Pentawatt, Multiwatt-5, staggered type-2, see http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-to-220/to-220_5_05-08-1421.pdf?domain=www.linear.com, https://www.diodes.com/assets/Package-Files/TO220-5.pdf +TO-220-5 Horizontal RM 1.7mm Pentawatt Multiwatt-5 staggered type-2 +0 +5 +5 +Package_TO_SOT_THT +TO-220-5_P3.4x3.8mm_StaggerOdd_Lead7.13mm_TabDown +TO-220-5, Horizontal, RM 1.7mm, Pentawatt, Multiwatt-5, staggered type-1, see http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-to-220/to-220_5_05-08-1421.pdf?domain=www.linear.com, https://www.diodes.com/assets/Package-Files/TO220-5.pdf +TO-220-5 Horizontal RM 1.7mm Pentawatt Multiwatt-5 staggered type-1 +0 +5 +5 +Package_TO_SOT_THT +TO-220-5_Vertical +TO-220-5, Vertical, RM 1.7mm, Pentawatt, Multiwatt-5, see http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-to-220/to-220_5_05-08-1421_straight_lead.pdf +TO-220-5 Vertical RM 1.7mm Pentawatt Multiwatt-5 +0 +5 +5 +Package_TO_SOT_THT +TO-220-7_P2.54x3.7mm_StaggerEven_Lead3.8mm_Vertical +TO-220-7, Vertical, RM 1.27mm, Multiwatt-7, staggered type-2 +TO-220-7 Vertical RM 1.27mm Multiwatt-7 staggered type-2 +0 +7 +7 +Package_TO_SOT_THT +TO-220-7_P2.54x3.7mm_StaggerOdd_Lead3.8mm_Vertical +TO-220-7, Vertical, RM 1.27mm, Multiwatt-7, staggered type-1 +TO-220-7 Vertical RM 1.27mm Multiwatt-7 staggered type-1 +0 +7 +7 +Package_TO_SOT_THT +TO-220-7_P2.54x3.8mm_StaggerEven_Lead5.85mm_TabDown +TO-220-7, Horizontal, RM 1.27mm, Multiwatt-7, staggered type-2 +TO-220-7 Horizontal RM 1.27mm Multiwatt-7 staggered type-2 +0 +7 +7 +Package_TO_SOT_THT +TO-220-7_P2.54x3.8mm_StaggerOdd_Lead5.85mm_TabDown +TO-220-7, Horizontal, RM 1.27mm, Multiwatt-7, staggered type-1 +TO-220-7 Horizontal RM 1.27mm Multiwatt-7 staggered type-1 +0 +7 +7 +Package_TO_SOT_THT +TO-220-8_Vertical +TO-220-8 (Multiwatt8), Vertical, 2.54mm Pitch (http://www.st.com/resource/en/datasheet/tda7264.pdf) +TO-220-9 Vertical 2.54mm Pitch Multiwatt 8 +0 +8 +8 +Package_TO_SOT_THT +TO-220-9_P1.94x3.7mm_StaggerEven_Lead3.8mm_Vertical +TO-220-9, Vertical, RM 0.97mm, Multiwatt-9, staggered type-2 +TO-220-9 Vertical RM 0.97mm Multiwatt-9 staggered type-2 +0 +9 +9 +Package_TO_SOT_THT +TO-220-9_P1.94x3.7mm_StaggerOdd_Lead3.8mm_Vertical +TO-220-9, Vertical, RM 0.97mm, Multiwatt-9, staggered type-1 +TO-220-9 Vertical RM 0.97mm Multiwatt-9 staggered type-1 +0 +9 +9 +Package_TO_SOT_THT +TO-220-9_P1.94x3.8mm_StaggerEven_Lead5.85mm_TabDown +TO-220-9, Horizontal, RM 0.97mm, Multiwatt-9, staggered type-2 +TO-220-9 Horizontal RM 0.97mm Multiwatt-9 staggered type-2 +0 +9 +9 +Package_TO_SOT_THT +TO-220-9_P1.94x3.8mm_StaggerOdd_Lead5.85mm_TabDown +TO-220-9, Horizontal, RM 0.97mm, Multiwatt-9, staggered type-1 +TO-220-9 Horizontal RM 0.97mm Multiwatt-9 staggered type-1 +0 +9 +9 +Package_TO_SOT_THT +TO-220-11_P3.4x2.54mm_StaggerEven_Lead5.84mm_TabDown +TO-220-11, Horizontal, RM 1.7mm, staggered type-2, see http://www.st.com/resource/en/datasheet/tda7391lv.pdf +TO-220-11 Horizontal RM 1.7mm staggered type-2 +0 +11 +11 +Package_TO_SOT_THT +TO-220-11_P3.4x2.54mm_StaggerOdd_Lead5.84mm_TabDown +TO-220-11, Horizontal, RM 1.7mm, staggered type-1, see http://www.st.com/resource/en/datasheet/tda7391lv.pdf +TO-220-11 Horizontal RM 1.7mm staggered type-1 +0 +11 +11 +Package_TO_SOT_THT +TO-220-11_P3.4x5.08mm_StaggerEven_Lead4.58mm_Vertical +TO-220-11, Vertical, RM 1.7mm, staggered type-2, see http://www.st.com/resource/en/datasheet/tda7391lv.pdf +TO-220-11 Vertical RM 1.7mm staggered type-2 +0 +11 +11 +Package_TO_SOT_THT +TO-220-11_P3.4x5.08mm_StaggerOdd_Lead4.85mm_Vertical +TO-220-11, Vertical, RM 1.7mm, staggered type-1, see http://www.st.com/resource/en/datasheet/tda7391lv.pdf +TO-220-11 Vertical RM 1.7mm staggered type-1 +0 +11 +11 +Package_TO_SOT_THT +TO-220-11_P3.4x5.08mm_StaggerOdd_Lead8.45mm_TabDown +TO-220-11, Horizontal, RM 1.7mm, staggered type-1, see http://www.ti.com/lit/ds/symlink/lmd18200.pdf +TO-220-11 Horizontal RM 1.7mm staggered type-1 +0 +11 +11 +Package_TO_SOT_THT +TO-220-15_P2.54x2.54mm_StaggerEven_Lead4.58mm_Vertical +TO-220-15, Vertical, RM 1.27mm, staggered type-2, see http://www.st.com/resource/en/datasheet/l298.pdf +TO-220-15 Vertical RM 1.27mm staggered type-2 +0 +15 +15 +Package_TO_SOT_THT +TO-220-15_P2.54x2.54mm_StaggerEven_Lead5.84mm_TabDown +TO-220-15, Horizontal, RM 1.27mm, staggered type-2, see http://www.st.com/resource/en/datasheet/l298.pdf +TO-220-15 Horizontal RM 1.27mm staggered type-2 +0 +15 +15 +Package_TO_SOT_THT +TO-220-15_P2.54x2.54mm_StaggerOdd_Lead4.58mm_Vertical +TO-220-15, Vertical, RM 1.27mm, staggered type-1, see http://www.st.com/resource/en/datasheet/l298.pdf +TO-220-15 Vertical RM 1.27mm staggered type-1 +0 +15 +15 +Package_TO_SOT_THT +TO-220-15_P2.54x2.54mm_StaggerOdd_Lead5.84mm_TabDown +TO-220-15, Horizontal, RM 1.27mm, staggered type-1, see http://www.st.com/resource/en/datasheet/l298.pdf +TO-220-15 Horizontal RM 1.27mm staggered type-1 +0 +15 +15 +Package_TO_SOT_THT +TO-220F-2_Horizontal_TabDown +TO-220F-2, Horizontal, RM 5.08mm, see http://www.onsemi.com/pub/Collateral/FFPF10F150S-D.pdf +TO-220F-2 Horizontal RM 5.08mm +0 +2 +2 +Package_TO_SOT_THT +TO-220F-2_Horizontal_TabUp +TO-220F-2, Horizontal, RM 5.08mm, see http://www.onsemi.com/pub/Collateral/FFPF10F150S-D.pdf +TO-220F-2 Horizontal RM 5.08mm +0 +2 +2 +Package_TO_SOT_THT +TO-220F-2_Vertical +TO-220F-2, Vertical, RM 5.08mm, see http://www.onsemi.com/pub/Collateral/FFPF10F150S-D.pdf +TO-220F-2 Vertical RM 5.08mm +0 +2 +2 +Package_TO_SOT_THT +TO-220F-3_Horizontal_TabDown +TO-220F-3, Horizontal, RM 2.54mm, see http://www.st.com/resource/en/datasheet/stp20nm60.pdf +TO-220F-3 Horizontal RM 2.54mm +0 +3 +3 +Package_TO_SOT_THT +TO-220F-3_Horizontal_TabUp +TO-220F-3, Horizontal, RM 2.54mm, see http://www.st.com/resource/en/datasheet/stp20nm60.pdf +TO-220F-3 Horizontal RM 2.54mm +0 +3 +3 +Package_TO_SOT_THT +TO-220F-3_Vertical +TO-220F-3, Vertical, RM 2.54mm, see http://www.st.com/resource/en/datasheet/stp20nm60.pdf +TO-220F-3 Vertical RM 2.54mm +0 +3 +3 +Package_TO_SOT_THT +TO-220F-4_Horizontal_TabDown +TO-220F-4, Horizontal, RM 2.54mm, see https://www.njr.com/semicon/PDF/package/TO-220F-4_E.pdf +TO-220F-4 Horizontal RM 2.54mm +0 +4 +4 +Package_TO_SOT_THT +TO-220F-4_Horizontal_TabUp +TO-220F-4, Horizontal, RM 2.54mm, see https://www.njr.com/semicon/PDF/package/TO-220F-4_E.pdf +TO-220F-4 Horizontal RM 2.54mm +0 +4 +4 +Package_TO_SOT_THT +TO-220F-4_P5.08x2.05mm_StaggerEven_Lead1.85mm_Vertical +TO-220F-4, Vertical, RM 2.54mm, staggered type-2, see https://www.njr.com/semicon/PDF/package/TO-220F-4_E.pdf +TO-220F-4 Vertical RM 2.54mm staggered type-2 +0 +4 +4 +Package_TO_SOT_THT +TO-220F-4_P5.08x2.05mm_StaggerOdd_Lead1.85mm_Vertical +TO-220F-4, Vertical, RM 2.54mm, staggered type-1, see https://www.njr.com/semicon/PDF/package/TO-220F-4_E.pdf +TO-220F-4 Vertical RM 2.54mm staggered type-1 +0 +4 +4 +Package_TO_SOT_THT +TO-220F-4_P5.08x3.7mm_StaggerEven_Lead3.5mm_Vertical +TO-220F-4, Vertical, RM 2.54mm, staggered type-2, see https://www.njr.com/semicon/PDF/package/TO-220F-4_E.pdf +TO-220F-4 Vertical RM 2.54mm staggered type-2 +0 +4 +4 +Package_TO_SOT_THT +TO-220F-4_P5.08x3.7mm_StaggerOdd_Lead3.5mm_Vertical +TO-220F-4, Vertical, RM 2.54mm, staggered type-1, see https://www.njr.com/semicon/PDF/package/TO-220F-4_E.pdf +TO-220F-4 Vertical RM 2.54mm staggered type-1 +0 +4 +4 +Package_TO_SOT_THT +TO-220F-4_Vertical +TO-220F-4, Vertical, RM 2.54mm, see https://www.njr.com/semicon/PDF/package/TO-220F-4_E.pdf +TO-220F-4 Vertical RM 2.54mm +0 +4 +4 +Package_TO_SOT_THT +TO-220F-5_Horizontal_TabDown +TO-220F-5, Horizontal, RM 1.7mm, PentawattF-, MultiwattF-5 +TO-220F-5 Horizontal RM 1.7mm PentawattF- MultiwattF-5 +0 +5 +5 +Package_TO_SOT_THT +TO-220F-5_Horizontal_TabUp +TO-220F-5, Horizontal, RM 1.7mm, PentawattF-, MultiwattF-5 +TO-220F-5 Horizontal RM 1.7mm PentawattF- MultiwattF-5 +0 +5 +5 +Package_TO_SOT_THT +TO-220F-5_P3.4x2.06mm_StaggerEven_Lead1.86mm_Vertical +TO-220F-5, Vertical, RM 1.7mm, PentawattF-, MultiwattF-5, staggered type-2 +TO-220F-5 Vertical RM 1.7mm PentawattF- MultiwattF-5 staggered type-2 +0 +5 +5 +Package_TO_SOT_THT +TO-220F-5_P3.4x2.06mm_StaggerOdd_Lead1.86mm_Vertical +TO-220F-5, Vertical, RM 1.7mm, PentawattF-, MultiwattF-5, staggered type-1 +TO-220F-5 Vertical RM 1.7mm PentawattF- MultiwattF-5 staggered type-1 +0 +5 +5 +Package_TO_SOT_THT +TO-220F-5_P3.4x3.7mm_StaggerEven_Lead3.5mm_Vertical +TO-220F-5, Vertical, RM 1.7mm, PentawattF-, MultiwattF-5, staggered type-2 +TO-220F-5 Vertical RM 1.7mm PentawattF- MultiwattF-5 staggered type-2 +0 +5 +5 +Package_TO_SOT_THT +TO-220F-5_P3.4x3.7mm_StaggerOdd_Lead3.5mm_Vertical +TO-220F-5, Vertical, RM 1.7mm, PentawattF-, MultiwattF-5, staggered type-1 +TO-220F-5 Vertical RM 1.7mm PentawattF- MultiwattF-5 staggered type-1 +0 +5 +5 +Package_TO_SOT_THT +TO-220F-5_Vertical +TO-220F-5, Vertical, RM 1.7mm, PentawattF-, MultiwattF-5 +TO-220F-5 Vertical RM 1.7mm PentawattF- MultiwattF-5 +0 +5 +5 +Package_TO_SOT_THT +TO-220F-7_P2.54x3.7mm_StaggerEven_Lead3.5mm_Vertical +TO-220F-7, Vertical, RM 1.27mm, staggered type-2 +TO-220F-7 Vertical RM 1.27mm staggered type-2 +0 +7 +7 +Package_TO_SOT_THT +TO-220F-7_P2.54x3.7mm_StaggerOdd_Lead3.5mm_Vertical +TO-220F-7, Vertical, RM 1.27mm, staggered type-1 +TO-220F-7 Vertical RM 1.27mm staggered type-1 +0 +7 +7 +Package_TO_SOT_THT +TO-220F-9_P1.8x3.7mm_StaggerEven_Lead3.5mm_Vertical +TO-220F-9, Vertical, RM 0.9mm, staggered type-2 +TO-220F-9 Vertical RM 0.9mm staggered type-2 +0 +9 +9 +Package_TO_SOT_THT +TO-220F-9_P1.8x3.7mm_StaggerOdd_Lead3.5mm_Vertical +TO-220F-9, Vertical, RM 0.9mm, staggered type-1 +TO-220F-9 Vertical RM 0.9mm staggered type-1 +0 +9 +9 +Package_TO_SOT_THT +TO-220F-11_P3.4x5.08mm_StaggerEven_Lead5.08mm_Vertical +TO-220F-11, Vertical, RM 1.7mm, MultiwattF-11, staggered type-2, see http://www.ti.com/lit/ds/symlink/lm3886.pdf +TO-220F-11 Vertical RM 1.7mm MultiwattF-11 staggered type-2 +0 +11 +11 +Package_TO_SOT_THT +TO-220F-11_P3.4x5.08mm_StaggerOdd_Lead5.08mm_Vertical +TO-220F-11, Vertical, RM 1.7mm, MultiwattF-11, staggered type-1, see http://www.ti.com/lit/ds/symlink/lm3886.pdf +TO-220F-11 Vertical RM 1.7mm MultiwattF-11 staggered type-1 +0 +11 +11 +Package_TO_SOT_THT +TO-220F-15_P2.54x5.08mm_StaggerEven_Lead5.08mm_Vertical +TO-220F-15, Vertical, RM 1.27mm, MultiwattF-15, staggered type-2 +TO-220F-15 Vertical RM 1.27mm MultiwattF-15 staggered type-2 +0 +15 +15 +Package_TO_SOT_THT +TO-220F-15_P2.54x5.08mm_StaggerOdd_Lead5.08mm_Vertical +TO-220F-15, Vertical, RM 1.27mm, MultiwattF-15, staggered type-1 +TO-220F-15 Vertical RM 1.27mm MultiwattF-15 staggered type-1 +0 +15 +15 +Package_TO_SOT_THT +TO-247-2_Horizontal_TabDown +TO-247-2, Horizontal, RM 10.9mm, see https://toshiba.semicon-storage.com/us/product/mosfet/to-247-4l.html +TO-247-2 Horizontal RM 10.9mm +0 +2 +2 +Package_TO_SOT_THT +TO-247-2_Horizontal_TabUp +TO-247-2, Horizontal, RM 10.9mm, see https://toshiba.semicon-storage.com/us/product/mosfet/to-247-4l.html +TO-247-2 Horizontal RM 10.9mm +0 +2 +2 +Package_TO_SOT_THT +TO-247-2_Vertical +TO-247-2, Vertical, RM 10.9mm, see https://toshiba.semicon-storage.com/us/product/mosfet/to-247-4l.html +TO-247-2 Vertical RM 10.9mm +0 +2 +2 +Package_TO_SOT_THT +TO-247-3_Horizontal_TabDown +TO-247-3, Horizontal, RM 5.45mm, see https://toshiba.semicon-storage.com/us/product/mosfet/to-247-4l.html +TO-247-3 Horizontal RM 5.45mm +0 +3 +3 +Package_TO_SOT_THT +TO-247-3_Horizontal_TabUp +TO-247-3, Horizontal, RM 5.45mm, see https://toshiba.semicon-storage.com/us/product/mosfet/to-247-4l.html +TO-247-3 Horizontal RM 5.45mm +0 +3 +3 +Package_TO_SOT_THT +TO-247-3_Vertical +TO-247-3, Vertical, RM 5.45mm, see https://toshiba.semicon-storage.com/us/product/mosfet/to-247-4l.html +TO-247-3 Vertical RM 5.45mm +0 +3 +3 +Package_TO_SOT_THT +TO-247-4_Horizontal_TabDown +TO-247-4, Horizontal, RM 2.54mm, see https://toshiba.semicon-storage.com/us/product/mosfet/to-247-4l.html +TO-247-4 Horizontal RM 2.54mm +0 +4 +4 +Package_TO_SOT_THT +TO-247-4_Horizontal_TabUp +TO-247-4, Horizontal, RM 2.54mm, see https://toshiba.semicon-storage.com/us/product/mosfet/to-247-4l.html +TO-247-4 Horizontal RM 2.54mm +0 +4 +4 +Package_TO_SOT_THT +TO-247-4_Vertical +TO-247-4, Vertical, RM 2.54mm, see https://toshiba.semicon-storage.com/us/product/mosfet/to-247-4l.html +TO-247-4 Vertical RM 2.54mm +0 +4 +4 +Package_TO_SOT_THT +TO-247-5_Horizontal_TabDown +TO-247-5, Horizontal, RM 2.54mm, see http://ww1.microchip.com/downloads/en/DeviceDoc/20005685A.pdf +TO-247-5 Horizontal RM 2.54mm +0 +5 +5 +Package_TO_SOT_THT +TO-247-5_Horizontal_TabUp +TO-247-5, Horizontal, RM 2.54mm, see http://ww1.microchip.com/downloads/en/DeviceDoc/20005685A.pdf +TO-247-5 Horizontal RM 2.54mm +0 +5 +5 +Package_TO_SOT_THT +TO-247-5_Vertical +TO-247-5, Vertical, RM 2.54mm, see http://ww1.microchip.com/downloads/en/DeviceDoc/20005685A.pdf +TO-247-5 Vertical RM 2.54mm +0 +5 +5 +Package_TO_SOT_THT +TO-251-2-1EP_Horizontal_TabDown +TO-251-2, Horizontal, RM 4.58mm, IPAK, see https://www.diodes.com/assets/Package-Files/TO251.pdf +TO-251-2 Horizontal RM 4.58mm IPAK +0 +3 +3 +Package_TO_SOT_THT +TO-251-2_Vertical +TO-251-2, Vertical, RM 4.58mm, IPAK, see https://www.diodes.com/assets/Package-Files/TO251.pdf +TO-251-2 Vertical RM 4.58mm IPAK +0 +2 +2 +Package_TO_SOT_THT +TO-251-3-1EP_Horizontal_TabDown +TO-251-3, Horizontal, RM 2.29mm, IPAK, see https://www.diodes.com/assets/Package-Files/TO251.pdf +TO-251-3 Horizontal RM 2.29mm IPAK +0 +4 +4 +Package_TO_SOT_THT +TO-251-3_Vertical +TO-251-3, Vertical, RM 2.29mm, IPAK, see https://www.diodes.com/assets/Package-Files/TO251.pdf +TO-251-3 Vertical RM 2.29mm IPAK +0 +3 +3 +Package_TO_SOT_THT +TO-262-3-1EP_Horizontal_TabDown +TO-262-3, Horizontal, RM 2.54mm, IIPAK, I2PAK, see http://www.onsemi.com/pub/Collateral/EN8586-D.PDF +TO-262-3 Horizontal RM 2.54mm IIPAK I2PAK +0 +4 +4 +Package_TO_SOT_THT +TO-262-3_Vertical +TO-262-3, Vertical, RM 2.54mm, IIPAK, I2PAK, see http://www.onsemi.com/pub/Collateral/EN8586-D.PDF +TO-262-3 Vertical RM 2.54mm IIPAK I2PAK +0 +3 +3 +Package_TO_SOT_THT +TO-262-5-1EP_Horizontal_TabDown +TO-262-5, Horizontal, RM 1.7mm, IIPAK, I2PAK, see http://pdf.datasheetcatalog.com/datasheet/irf/iris4011.pdf +TO-262-5 Horizontal RM 1.7mm IIPAK I2PAK +0 +6 +6 +Package_TO_SOT_THT +TO-262-5_Vertical +TO-262-5, Vertical, RM 1.7mm, IIPAK, I2PAK, see http://pdf.datasheetcatalog.com/datasheet/irf/iris4011.pdf +TO-262-5 Vertical RM 1.7mm IIPAK I2PAK +0 +5 +5 +Package_TO_SOT_THT +TO-264-2_Horizontal_TabDown +TO-264-2, Horizontal, RM 10.9mm, see https://www.fairchildsemi.com/package-drawings/TO/TO264A03.pdf +TO-264-2 Horizontal RM 10.9mm +0 +2 +2 +Package_TO_SOT_THT +TO-264-2_Horizontal_TabUp +TO-264-2, Horizontal, RM 10.9mm, see https://www.fairchildsemi.com/package-drawings/TO/TO264A03.pdf +TO-264-2 Horizontal RM 10.9mm +0 +2 +2 +Package_TO_SOT_THT +TO-264-2_Vertical +TO-264-2, Vertical, RM 10.9mm, see https://www.fairchildsemi.com/package-drawings/TO/TO264A03.pdf +TO-264-2 Vertical RM 10.9mm +0 +2 +2 +Package_TO_SOT_THT +TO-264-3_Horizontal_TabDown +TO-264-3, Horizontal, RM 5.45mm, see https://www.fairchildsemi.com/package-drawings/TO/TO264A03.pdf +TO-264-3 Horizontal RM 5.45mm +0 +3 +3 +Package_TO_SOT_THT +TO-264-3_Horizontal_TabUp +TO-264-3, Horizontal, RM 5.45mm, see https://www.fairchildsemi.com/package-drawings/TO/TO264A03.pdf +TO-264-3 Horizontal RM 5.45mm +0 +3 +3 +Package_TO_SOT_THT +TO-264-3_Vertical +TO-264-3, Vertical, RM 5.45mm, see https://www.fairchildsemi.com/package-drawings/TO/TO264A03.pdf +TO-264-3 Vertical RM 5.45mm +0 +3 +3 +Package_TO_SOT_THT +TO-264-5_Horizontal_TabDown +TO-264-5, Horizontal, RM 3.81mm, see https://www.onsemi.com/pub/Collateral/NJL3281D-D.PDF +TO-264-5 Horizontal RM 3.81mm +0 +5 +5 +Package_TO_SOT_THT +TO-264-5_Horizontal_TabUp +TO-264-5, Horizontal, RM 3.81mm, see https://www.onsemi.com/pub/Collateral/NJL3281D-D.PDF +TO-264-5 Horizontal RM 3.81mm +0 +5 +5 +Package_TO_SOT_THT +TO-264-5_Vertical +TO-264-5, Vertical, RM 3.81mm, see https://www.onsemi.com/pub/Collateral/NJL3281D-D.PDF +TO-264-5 Vertical RM 3.81mm +0 +5 +5 +Potentiometer_SMD +Potentiometer_ACP_CA6-VSMD_Vertical +Potentiometer, vertical, ACP CA6-VSMD, http://www.acptechnologies.com/wp-content/uploads/2017/06/01-ACP-CA6.pdf +Potentiometer vertical ACP CA6-VSMD +0 +3 +3 +Potentiometer_SMD +Potentiometer_ACP_CA6-VSMD_Vertical_Hole +Potentiometer, vertical, shaft hole, ACP CA6-VSMD, http://www.acptechnologies.com/wp-content/uploads/2017/06/01-ACP-CA6.pdf +Potentiometer vertical hole ACP CA6-VSMD +0 +3 +3 +Potentiometer_SMD +Potentiometer_ACP_CA9-VSMD_Vertical +Potentiometer, vertical, ACP CA9-VSMD, http://www.acptechnologies.com/wp-content/uploads/2017/05/02-ACP-CA9-CE9.pdf +Potentiometer vertical ACP CA9-VSMD +0 +3 +3 +Potentiometer_SMD +Potentiometer_ACP_CA9-VSMD_Vertical_Hole +Potentiometer, vertical, shaft hole, ACP CA9-VSMD, http://www.acptechnologies.com/wp-content/uploads/2017/05/02-ACP-CA9-CE9.pdf +Potentiometer vertical hole ACP CA9-VSMD +0 +3 +3 +Potentiometer_SMD +Potentiometer_ACP_CA14-VSMD_Vertical +Potentiometer, vertical, ACP CA14-VSMD, http://www.acptechnologies.com/wp-content/uploads/2017/10/03-ACP-CA14-CE14.pdf +Potentiometer vertical ACP CA14-VSMD +0 +3 +3 +Potentiometer_SMD +Potentiometer_ACP_CA14-VSMD_Vertical_Hole +Potentiometer, vertical, shaft hole, ACP CA14-VSMD, http://www.acptechnologies.com/wp-content/uploads/2017/10/03-ACP-CA14-CE14.pdf +Potentiometer vertical hole ACP CA14-VSMD +0 +3 +3 +Potentiometer_SMD +Potentiometer_Bourns_3214G_Horizontal +Potentiometer, horizontal, Bourns 3214G, https://www.bourns.com/docs/Product-Datasheets/3214.pdf +Potentiometer horizontal Bourns 3214G +0 +3 +3 +Potentiometer_SMD +Potentiometer_Bourns_3214J_Horizontal +Potentiometer, horizontal, Bourns 3214J, https://www.bourns.com/docs/Product-Datasheets/3214.pdf +Potentiometer horizontal Bourns 3214J +0 +3 +3 +Potentiometer_SMD +Potentiometer_Bourns_3214W_Vertical +Potentiometer, vertical, Bourns 3214W, https://www.bourns.com/docs/Product-Datasheets/3214.pdf +Potentiometer vertical Bourns 3214W +0 +3 +3 +Potentiometer_SMD +Potentiometer_Bourns_3214X_Vertical +Potentiometer, vertical, Bourns 3214X, https://www.bourns.com/docs/Product-Datasheets/3214.pdf +Potentiometer vertical Bourns 3214X +0 +3 +3 +Potentiometer_SMD +Potentiometer_Bourns_3224G_Horizontal +Potentiometer, horizontal, Bourns 3224G, https://www.bourns.com/docs/Product-Datasheets/3224.pdf +Potentiometer horizontal Bourns 3224G +0 +3 +3 +Potentiometer_SMD +Potentiometer_Bourns_3224J_Horizontal +Potentiometer, horizontal, Bourns 3224J, https://www.bourns.com/docs/Product-Datasheets/3224.pdf +Potentiometer horizontal Bourns 3224J +0 +3 +3 +Potentiometer_SMD +Potentiometer_Bourns_3224W_Vertical +Potentiometer, vertical, Bourns 3224W, https://www.bourns.com/docs/Product-Datasheets/3224.pdf +Potentiometer vertical Bourns 3224W +0 +3 +3 +Potentiometer_SMD +Potentiometer_Bourns_3224X_Vertical +Potentiometer, vertical, Bourns 3224X, https://www.bourns.com/docs/Product-Datasheets/3224.pdf +Potentiometer vertical Bourns 3224X +0 +3 +3 +Potentiometer_SMD +Potentiometer_Bourns_3269P_Horizontal +Potentiometer, horizontal, Bourns 3269P, https://www.bourns.com/docs/Product-Datasheets/3269.pdf +Potentiometer horizontal Bourns 3269P +0 +3 +3 +Potentiometer_SMD +Potentiometer_Bourns_3269W_Vertical +Potentiometer, vertical, Bourns 3269W, https://www.bourns.com/docs/Product-Datasheets/3269.pdf +Potentiometer vertical Bourns 3269W +0 +3 +3 +Potentiometer_SMD +Potentiometer_Bourns_3269X_Horizontal +Potentiometer, horizontal, Bourns 3269X, https://www.bourns.com/docs/Product-Datasheets/3269.pdf +Potentiometer horizontal Bourns 3269X +0 +3 +3 +Potentiometer_SMD +Potentiometer_Bourns_3314G_Vertical +Potentiometer, vertical, top-adjust, Bourns 3314G, http://www.bourns.com/docs/Product-Datasheets/3314.pdf +Potentiometer vertical Bourns 3314G +0 +3 +3 +Potentiometer_SMD +Potentiometer_Bourns_3314J_Vertical +Potentiometer, vertical, top-adjust, Bourns 3314J, http://www.bourns.com/docs/Product-Datasheets/3314.pdf +Potentiometer vertical Bourns 3314J +0 +3 +3 +Potentiometer_SMD +Potentiometer_Bourns_3314R-1_Vertical_Hole +Potentiometer, vertical, bottom-adjust, single slot, Bourns 3314R-1, http://www.bourns.com/docs/Product-Datasheets/3314.pdf +Potentiometer vertical hole Bourns 3314R-1 +0 +3 +3 +Potentiometer_SMD +Potentiometer_Bourns_3314R-GM5_Vertical +Potentiometer, vertical, cross-slot, extended leadframe, Bourns 3314R-GM5, http://www.bourns.com/docs/Product-Datasheets/3314.pdf +Potentiometer vertical Bourns 3314R-GM5 +0 +3 +3 +Potentiometer_SMD +Potentiometer_Bourns_3314S_Horizontal +Potentiometer, horizontal, Bourns 3314S, http://www.bourns.com/docs/Product-Datasheets/3314.pdf +Potentiometer horizontal Bourns 3314S +0 +3 +3 +Potentiometer_SMD +Potentiometer_Bourns_PRS11S_Vertical +Potentiometer, vertical, Bourns PRS11S, http://www.bourns.com/docs/Product-Datasheets/PRS11S.pdf +Potentiometer vertical Bourns PRS11S +0 +5 +5 +Potentiometer_SMD +Potentiometer_Bourns_TC33X_Vertical +Potentiometer, Bourns, TC33X, Vertical, https://www.bourns.com/pdfs/TC33.pdf +Potentiometer Bourns TC33X Vertical +0 +3 +3 +Potentiometer_SMD +Potentiometer_Vishay_TS53YJ_Vertical +Potentiometer, vertical, Vishay TS53YJ, https://www.vishay.com/docs/51008/ts53.pdf +Potentiometer vertical Vishay TS53YJ +0 +3 +3 +Potentiometer_SMD +Potentiometer_Vishay_TS53YL_Vertical +Potentiometer, vertical, Vishay TS53YL, https://www.vishay.com/docs/51008/ts53.pdf +Potentiometer vertical Vishay TS53YL +0 +3 +3 +Potentiometer_THT +Potentiometer_ACP_CA6-H2,5_Horizontal +Potentiometer, horizontal, ACP CA6-H2,5, http://www.acptechnologies.com/wp-content/uploads/2017/06/01-ACP-CA6.pdf +Potentiometer horizontal ACP CA6-H2,5 +0 +3 +3 +Potentiometer_THT +Potentiometer_ACP_CA9-H2,5_Horizontal +Potentiometer, horizontal, ACP CA9-H2,5, http://www.acptechnologies.com/wp-content/uploads/2017/05/02-ACP-CA9-CE9.pdf +Potentiometer horizontal ACP CA9-H2,5 +0 +3 +3 +Potentiometer_THT +Potentiometer_ACP_CA9-H3,8_Horizontal +Potentiometer, horizontal, ACP CA9-H3,8, http://www.acptechnologies.com/wp-content/uploads/2017/05/02-ACP-CA9-CE9.pdf +Potentiometer horizontal ACP CA9-H3,8 +0 +3 +3 +Potentiometer_THT +Potentiometer_ACP_CA9-H5_Horizontal +Potentiometer, horizontal, ACP CA9-H5, http://www.acptechnologies.com/wp-content/uploads/2017/05/02-ACP-CA9-CE9.pdf +Potentiometer horizontal ACP CA9-H5 +0 +3 +3 +Potentiometer_THT +Potentiometer_ACP_CA9-V10_Vertical +Potentiometer, vertical, ACP CA9-V10, http://www.acptechnologies.com/wp-content/uploads/2017/05/02-ACP-CA9-CE9.pdf +Potentiometer vertical ACP CA9-V10 +0 +3 +3 +Potentiometer_THT +Potentiometer_ACP_CA9-V10_Vertical_Hole +Potentiometer, vertical, shaft hole, ACP CA9-V10, http://www.acptechnologies.com/wp-content/uploads/2017/05/02-ACP-CA9-CE9.pdf +Potentiometer vertical hole ACP CA9-V10 +0 +3 +3 +Potentiometer_THT +Potentiometer_ACP_CA14-H2,5_Horizontal +Potentiometer, horizontal, ACP CA14-H2,5, http://www.acptechnologies.com/wp-content/uploads/2017/10/03-ACP-CA14-CE14.pdf +Potentiometer horizontal ACP CA14-H2,5 +0 +3 +3 +Potentiometer_THT +Potentiometer_ACP_CA14-H4_Horizontal +Potentiometer, horizontal, ACP CA14-H4, http://www.acptechnologies.com/wp-content/uploads/2017/10/03-ACP-CA14-CE14.pdf +Potentiometer horizontal ACP CA14-H4 +0 +3 +3 +Potentiometer_THT +Potentiometer_ACP_CA14-H5_Horizontal +Potentiometer, horizontal, ACP CA14-H5, http://www.acptechnologies.com/wp-content/uploads/2017/10/03-ACP-CA14-CE14.pdf +Potentiometer horizontal ACP CA14-H5 +0 +3 +3 +Potentiometer_THT +Potentiometer_ACP_CA14V-15_Vertical +Potentiometer, vertical, ACP CA14V-15, http://www.acptechnologies.com/wp-content/uploads/2017/10/03-ACP-CA14-CE14.pdf +Potentiometer vertical ACP CA14V-15 +0 +3 +3 +Potentiometer_THT +Potentiometer_ACP_CA14V-15_Vertical_Hole +Potentiometer, vertical, shaft hole, ACP CA14V-15, http://www.acptechnologies.com/wp-content/uploads/2017/10/03-ACP-CA14-CE14.pdf +Potentiometer vertical hole ACP CA14V-15 +0 +3 +3 +Potentiometer_THT +Potentiometer_Alpha_RD901F-40-00D_Single_Vertical +Potentiometer, vertical, 9mm, single, http://www.taiwanalpha.com.tw/downloads?target=products&id=113 +potentiometer vertical 9mm single +0 +5 +3 +Potentiometer_THT +Potentiometer_Alpha_RD901F-40-00D_Single_Vertical_CircularHoles +Potentiometer, vertical, 9mm, single, http://www.taiwanalpha.com.tw/downloads?target=products&id=113 +potentiometer vertical 9mm single +0 +5 +3 +Potentiometer_THT +Potentiometer_Alpha_RD902F-40-00D_Dual_Vertical +Potentiometer, vertical, 9mm, dual, http://www.taiwanalpha.com.tw/downloads?target=products&id=113 +potentiometer vertical 9mm dual +0 +8 +6 +Potentiometer_THT +Potentiometer_Alpha_RD902F-40-00D_Dual_Vertical_CircularHoles +Potentiometer, vertical, 9mm, dual, http://www.taiwanalpha.com.tw/downloads?target=products&id=113 +potentiometer vertical 9mm dual +0 +8 +6 +Potentiometer_THT +Potentiometer_Alps_RK09K_Single_Horizontal +111009J 1110AK4 11100DN 1110AAR 1110077 1110A0J 110AMJ 1110B26 D1110C1A Potentiometer, horizontal, Alps RK09K Single, https://tech.alpsalpine.com/prod/e/pdf/potentiometer/rotarypotentiometers/rk09k/rk09k.pdf +Potentiometer horizontal Alps RK09K Single Snapin +0 +5 +4 +Potentiometer_THT +Potentiometer_Alps_RK09K_Single_Vertical +113004U 1130A6S 11300DR 1130A8G 1130081 1130A5R 1130AP5 1130AST D1130C3W D1130C1B D1130C3C D1130C2P Potentiometer, vertical, Alps RK09K Single, https://tech.alpsalpine.com/prod/e/pdf/potentiometer/rotarypotentiometers/rk09k/rk09k.pdf +Potentiometer vertical Alps RK09K RK09D Single Snapin +0 +5 +4 +Potentiometer_THT +Potentiometer_Alps_RK09L_Double_Horizontal +122002H 122002L 12B0A4S 12B0A1V Potentiometer, horizontal, Alps RK09L Double, https://tech.alpsalpine.com/prod/e/pdf/potentiometer/rotarypotentiometers/rk09l/rk09l.pdf +Potentiometer horizontal Alps RK09L Double +0 +8 +7 +Potentiometer_THT +Potentiometer_Alps_RK09L_Double_Vertical +1240015 1240019 12D0A1W 12D0A1T Potentiometer, vertical, Alps RK09L Double, https://tech.alpsalpine.com/prod/e/pdf/potentiometer/rotarypotentiometers/rk09l/rk09l.pdf +Potentiometer vertical Alps RK09L Double +0 +8 +7 +Potentiometer_THT +Potentiometer_Alps_RK09L_Single_Horizontal +1120A5F 1120036 1120A0Z 112003S Potentiometer, horizontal, Alps RK09L Single, https://tech.alpsalpine.com/prod/e/pdf/potentiometer/rotarypotentiometers/rk09l/rk09l.pdf +Potentiometer horizontal Alps RK09L Single +0 +5 +4 +Potentiometer_THT +Potentiometer_Alps_RK09L_Single_Vertical + 1140A5L 114001E 1140A2U 114001T Potentiometer, vertical, Alps RK09L Single, https://tech.alpsalpine.com/prod/e/pdf/potentiometer/rotarypotentiometers/rk09l/rk09l.pdf +Potentiometer vertical Alps RK09L Single +0 +5 +4 +Potentiometer_THT +Potentiometer_Alps_RK09Y11_Single_Horizontal +Potentiometer, horizontal, Long Life, Alps RK09Y11 Single, https://tech.alpsalpine.com/prod/e/pdf/potentiometer/rotarypotentiometers/rk09y11/rk09y11.pdf +Potentiometer horizontal Alps RK09Y11 Single +0 +3 +3 +Potentiometer_THT +Potentiometer_Alps_RK097_Dual_Horizontal +1210, Dual Pot, Horizontal, Alps RK097 Dual, https://tech.alpsalpine.com/prod/e/pdf/potentiometer/rotarypotentiometers/rk097/rk097.pdf +Potentiometer horizontal Alps RK097 Dual +0 +6 +6 +Potentiometer_THT +Potentiometer_Alps_RK097_Dual_Horizontal_Switch +1221-5R1211, Dual Pot, Horizontal, Switch, Alps RK097 Dual, https://tech.alpsalpine.com/prod/e/pdf/potentiometer/rotarypotentiometers/rk097/rk097.pdf +Potentiometer horizontal Alps RK097 Dual Switch +0 +8 +8 +Potentiometer_THT +Potentiometer_Alps_RK097_Single_Horizontal +1110, Single Pot, Horizontal, Alps RK097 Single, https://tech.alpsalpine.com/prod/e/pdf/potentiometer/rotarypotentiometers/rk097/rk097.pdf +Potentiometer horizontal Alps RK097 Single +0 +3 +3 +Potentiometer_THT +Potentiometer_Alps_RK097_Single_Horizontal_Switch +1111-5R1211, Single Pot, Horizontal, Switch, Alps RK097 Single, https://tech.alpsalpine.com/prod/e/pdf/potentiometer/rotarypotentiometers/rk097/rk097.pdf +Potentiometer horizontal Alps RK097 Single Switch +0 +5 +5 +Potentiometer_THT +Potentiometer_Alps_RK163_Dual_Horizontal +12101A2 1210AX9 12A0B85 12A0BKR Potentiometer, horizontal, Alps RK163 Dual, https://tech.alpsalpine.com/prod/e/pdf/potentiometer/rotarypotentiometers/rk16/rk16.pdf +Potentiometer horizontal Alps RK163 Dual +0 +6 +6 +Potentiometer_THT +Potentiometer_Alps_RK163_Single_Horizontal +1110U1Q 1110TNP 1110U2A 1110U0Q Potentiometer, horizontal, Alps RK163 Single, https://tech.alpsalpine.com/prod/e/pdf/potentiometer/rotarypotentiometers/rk16/rk16.pdf +Potentiometer horizontal Alps RK163 Single +0 +3 +3 +Potentiometer_THT +Potentiometer_Bourns_3005_Horizontal +Potentiometer, horizontal, Bourns 3005, http://www.bourns.com/docs/Product-Datasheets/3005.pdf +Potentiometer horizontal Bourns 3005 +0 +3 +3 +Potentiometer_THT +Potentiometer_Bourns_3006P_Horizontal +Potentiometer, horizontal, Bourns 3006P, https://www.bourns.com/docs/Product-Datasheets/3006.pdf +Potentiometer horizontal Bourns 3006P +0 +3 +3 +Potentiometer_THT +Potentiometer_Bourns_3006W_Horizontal +Potentiometer, horizontal, Bourns 3006W, https://www.bourns.com/docs/Product-Datasheets/3006.pdf +Potentiometer horizontal Bourns 3006W +0 +3 +3 +Potentiometer_THT +Potentiometer_Bourns_3006Y_Horizontal +Potentiometer, horizontal, Bourns 3006Y, https://www.bourns.com/docs/Product-Datasheets/3006.pdf +Potentiometer horizontal Bourns 3006Y +0 +3 +3 +Potentiometer_THT +Potentiometer_Bourns_3009P_Horizontal +Potentiometer, horizontal, Bourns 3009P, http://www.bourns.com/docs/Product-Datasheets/3009.pdf +Potentiometer horizontal Bourns 3009P +0 +3 +3 +Potentiometer_THT +Potentiometer_Bourns_3009Y_Horizontal +Potentiometer, horizontal, Bourns 3009Y, http://www.bourns.com/docs/Product-Datasheets/3009.pdf +Potentiometer horizontal Bourns 3009Y +0 +3 +3 +Potentiometer_THT +Potentiometer_Bourns_3266P_Horizontal +Potentiometer, horizontal, Bourns 3266P, https://www.bourns.com/docs/Product-Datasheets/3266.pdf +Potentiometer horizontal Bourns 3266P +0 +3 +3 +Potentiometer_THT +Potentiometer_Bourns_3266W_Vertical +Potentiometer, vertical, Bourns 3266W, https://www.bourns.com/docs/Product-Datasheets/3266.pdf +Potentiometer vertical Bourns 3266W +0 +3 +3 +Potentiometer_THT +Potentiometer_Bourns_3266X_Horizontal +Potentiometer, horizontal, Bourns 3266X, https://www.bourns.com/docs/Product-Datasheets/3266.pdf +Potentiometer horizontal Bourns 3266X +0 +3 +3 +Potentiometer_THT +Potentiometer_Bourns_3266Y_Vertical +Potentiometer, vertical, Bourns 3266Y, https://www.bourns.com/docs/Product-Datasheets/3266.pdf +Potentiometer vertical Bourns 3266Y +0 +3 +3 +Potentiometer_THT +Potentiometer_Bourns_3266Z_Horizontal +Potentiometer, horizontal, Bourns 3266Z, https://www.bourns.com/docs/Product-Datasheets/3266.pdf +Potentiometer horizontal Bourns 3266Z +0 +3 +3 +Potentiometer_THT +Potentiometer_Bourns_3296P_Horizontal +Potentiometer, horizontal, Bourns 3296P, https://www.bourns.com/pdfs/3296.pdf +Potentiometer horizontal Bourns 3296P +0 +3 +3 +Potentiometer_THT +Potentiometer_Bourns_3296W_Vertical +Potentiometer, vertical, Bourns 3296W, https://www.bourns.com/pdfs/3296.pdf +Potentiometer vertical Bourns 3296W +0 +3 +3 +Potentiometer_THT +Potentiometer_Bourns_3296X_Horizontal +Potentiometer, horizontal, Bourns 3296X, https://www.bourns.com/pdfs/3296.pdf +Potentiometer horizontal Bourns 3296X +0 +3 +3 +Potentiometer_THT +Potentiometer_Bourns_3296Y_Vertical +Potentiometer, vertical, Bourns 3296Y, https://www.bourns.com/pdfs/3296.pdf +Potentiometer vertical Bourns 3296Y +0 +3 +3 +Potentiometer_THT +Potentiometer_Bourns_3296Z_Horizontal +Potentiometer, horizontal, Bourns 3296Z, https://www.bourns.com/pdfs/3296.pdf +Potentiometer horizontal Bourns 3296Z +0 +3 +3 +Potentiometer_THT +Potentiometer_Bourns_3299P_Horizontal +Potentiometer, horizontal, Bourns 3299P, https://www.bourns.com/pdfs/3299.pdf +Potentiometer horizontal Bourns 3299P +0 +3 +3 +Potentiometer_THT +Potentiometer_Bourns_3299W_Vertical +Potentiometer, vertical, Bourns 3299W, https://www.bourns.com/pdfs/3299.pdf +Potentiometer vertical Bourns 3299W +0 +3 +3 +Potentiometer_THT +Potentiometer_Bourns_3299X_Horizontal +Potentiometer, horizontal, Bourns 3299X, https://www.bourns.com/pdfs/3299.pdf +Potentiometer horizontal Bourns 3299X +0 +3 +3 +Potentiometer_THT +Potentiometer_Bourns_3299Y_Vertical +Potentiometer, vertical, Bourns 3299Y, https://www.bourns.com/pdfs/3299.pdf +Potentiometer vertical Bourns 3299Y +0 +3 +3 +Potentiometer_THT +Potentiometer_Bourns_3299Z_Horizontal +Potentiometer, horizontal, Bourns 3299Z, https://www.bourns.com/pdfs/3299.pdf +Potentiometer horizontal Bourns 3299Z +0 +3 +3 +Potentiometer_THT +Potentiometer_Bourns_3339H_Vertical +Potentiometer, vertical, Bourns 3339H, http://www.bourns.com/docs/Product-Datasheets/3339.pdf +Potentiometer vertical Bourns 3339H +0 +3 +3 +Potentiometer_THT +Potentiometer_Bourns_3339P_Vertical +Potentiometer, vertical, Bourns 3339P, http://www.bourns.com/docs/Product-Datasheets/3339.pdf +Potentiometer vertical Bourns 3339P +0 +3 +3 +Potentiometer_THT +Potentiometer_Bourns_3339P_Vertical_HandSoldering +Potentiometer, vertical, Bourns 3339P, hand-soldering, http://www.bourns.com/docs/Product-Datasheets/3339.pdf +Potentiometer vertical Bourns 3339P hand-soldering +0 +3 +3 +Potentiometer_THT +Potentiometer_Bourns_3339S_Horizontal +Potentiometer, horizontal, Bourns 3339S, http://www.bourns.com/docs/Product-Datasheets/3339.pdf +Potentiometer horizontal Bourns 3339S +0 +3 +3 +Potentiometer_THT +Potentiometer_Bourns_3339W_Horizontal +Potentiometer, horizontal, Bourns 3339W, http://www.bourns.com/docs/Product-Datasheets/3339.pdf +Potentiometer horizontal Bourns 3339W +0 +3 +3 +Potentiometer_THT +Potentiometer_Bourns_3386C_Horizontal +Potentiometer, horizontal, Bourns 3386C, https://www.bourns.com/pdfs/3386.pdf +Potentiometer horizontal Bourns 3386C +0 +3 +3 +Potentiometer_THT +Potentiometer_Bourns_3386F_Vertical +Potentiometer, vertical, Bourns 3386F, https://www.bourns.com/pdfs/3386.pdf +Potentiometer vertical Bourns 3386F +0 +3 +3 +Potentiometer_THT +Potentiometer_Bourns_3386P_Vertical +Potentiometer, vertical, Bourns 3386P, https://www.bourns.com/pdfs/3386.pdf +Potentiometer vertical Bourns 3386P +0 +3 +3 +Potentiometer_THT +Potentiometer_Bourns_3386W_Vertical +Potentiometer, vertical, Bourns 3386W, https://www.bourns.com/docs/Product-Datasheets/3386.pdf +Potentiometer +0 +3 +3 +Potentiometer_THT +Potentiometer_Bourns_3386X_Horizontal +Potentiometer, horizontal, Bourns 3386X, https://www.bourns.com/pdfs/3386.pdf +Potentiometer horizontal Bourns 3386X +0 +3 +3 +Potentiometer_THT +Potentiometer_Bourns_PTA1543_Single_Slide +Bourns single-gang slide potentiometer, 15.0mm travel, https://www.bourns.com/docs/Product-Datasheets/pta.pdf +Bourns single-gang slide potentiometer 15.0mm +0 +7 +4 +Potentiometer_THT +Potentiometer_Bourns_PTA2043_Single_Slide +Bourns single-gang slide potentiometer, 20.0mm travel, https://www.bourns.com/docs/Product-Datasheets/pta.pdf +Bourns single-gang slide potentiometer 20.0mm +0 +7 +4 +Potentiometer_THT +Potentiometer_Bourns_PTA3043_Single_Slide +Bourns single-gang slide potentiometer, 30.0mm travel, https://www.bourns.com/docs/Product-Datasheets/pta.pdf +Bourns single-gang slide potentiometer 30.0mm +0 +7 +4 +Potentiometer_THT +Potentiometer_Bourns_PTA4543_Single_Slide +Bourns single-gang slide potentiometer, 45.0mm travel, https://www.bourns.com/docs/Product-Datasheets/pta.pdf +Bourns single-gang slide potentiometer 45.0mm +0 +7 +4 +Potentiometer_THT +Potentiometer_Bourns_PTA6043_Single_Slide +Bourns single-gang slide potentiometer, 60.0mm travel, https://www.bourns.com/docs/Product-Datasheets/pta.pdf +Bourns single-gang slide potentiometer 60.0mm +0 +7 +4 +Potentiometer_THT +Potentiometer_Bourns_PTV09A-1_Single_Vertical +Potentiometer, vertical, Bourns PTV09A-1 Single, http://www.bourns.com/docs/Product-Datasheets/ptv09.pdf +Potentiometer vertical Bourns PTV09A-1 Single +0 +3 +3 +Potentiometer_THT +Potentiometer_Bourns_PTV09A-2_Single_Horizontal +Potentiometer, horizontal, Bourns PTV09A-2 Single, http://www.bourns.com/docs/Product-Datasheets/ptv09.pdf +Potentiometer horizontal Bourns PTV09A-2 Single +0 +5 +3 +Potentiometer_THT +Potentiometer_Omeg_PC16BU_Horizontal +Potentiometer, horizontal, Omeg PC16BU, http://www.omeg.co.uk/pc6bubrc.htm +Potentiometer horizontal Omeg PC16BU +0 +3 +3 +Potentiometer_THT +Potentiometer_Omeg_PC16BU_Vertical +Potentiometer, vertical, Omeg PC16BU, http://www.omeg.co.uk/pc6bubrc.htm +Potentiometer vertical Omeg PC16BU +0 +3 +3 +Potentiometer_THT +Potentiometer_Piher_PC-16_Dual_Horizontal +Potentiometer, horizontal, Piher PC-16 Dual, http://www.piher-nacesa.com/pdf/20-PC16v03.pdf +Potentiometer horizontal Piher PC-16 Dual +0 +6 +6 +Potentiometer_THT +Potentiometer_Piher_PC-16_Single_Horizontal +Potentiometer, horizontal, Piher PC-16 Single, http://www.piher-nacesa.com/pdf/20-PC16v03.pdf +Potentiometer horizontal Piher PC-16 Single +0 +3 +3 +Potentiometer_THT +Potentiometer_Piher_PC-16_Single_Vertical +Potentiometer, vertical, Piher PC-16 Single, http://www.piher-nacesa.com/pdf/20-PC16v03.pdf +Potentiometer vertical Piher PC-16 Single +0 +3 +3 +Potentiometer_THT +Potentiometer_Piher_PC-16_Triple_Horizontal +Potentiometer, horizontal, Piher PC-16 Triple, http://www.piher-nacesa.com/pdf/20-PC16v03.pdf +Potentiometer horizontal Piher PC-16 Triple +0 +9 +9 +Potentiometer_THT +Potentiometer_Piher_PT-6-H_Horizontal +Potentiometer, horizontal, Piher PT-6-H, http://www.piher-nacesa.com/pdf/11-PT6v03.pdf +Potentiometer horizontal Piher PT-6-H +0 +3 +3 +Potentiometer_THT +Potentiometer_Piher_PT-6-V_Vertical +Potentiometer, vertical, Piher PT-6-V, http://www.piher-nacesa.com/pdf/11-PT6v03.pdf +Potentiometer vertical Piher PT-6-V +0 +3 +3 +Potentiometer_THT +Potentiometer_Piher_PT-6-V_Vertical_Hole +Potentiometer, vertical, shaft hole, Piher PT-6-V, http://www.piher-nacesa.com/pdf/11-PT6v03.pdf +Potentiometer vertical hole Piher PT-6-V +0 +3 +3 +Potentiometer_THT +Potentiometer_Piher_PT-10-H01_Horizontal +Potentiometer, horizontal, Piher PT-10-H01, http://www.piher-nacesa.com/pdf/12-PT10v03.pdf +Potentiometer horizontal Piher PT-10-H01 +0 +3 +3 +Potentiometer_THT +Potentiometer_Piher_PT-10-H05_Horizontal +Potentiometer, horizontal, Piher PT-10-H05, http://www.piher-nacesa.com/pdf/12-PT10v03.pdf +Potentiometer horizontal Piher PT-10-H05 +0 +3 +3 +Potentiometer_THT +Potentiometer_Piher_PT-10-V05_Vertical +Potentiometer, vertical, Piher PT-10-V05, http://www.piher-nacesa.com/pdf/12-PT10v03.pdf +Potentiometer vertical Piher PT-10-V05 +0 +3 +3 +Potentiometer_THT +Potentiometer_Piher_PT-10-V10_Vertical +Potentiometer, vertical, Piher PT-10-V10, http://www.piher-nacesa.com/pdf/12-PT10v03.pdf +Potentiometer vertical Piher PT-10-V10 +0 +3 +3 +Potentiometer_THT +Potentiometer_Piher_PT-10-V10_Vertical_Hole +Potentiometer, vertical, shaft hole, Piher PT-10-V10, http://www.piher-nacesa.com/pdf/12-PT10v03.pdf +Potentiometer vertical hole Piher PT-10-V10 +0 +3 +3 +Potentiometer_THT +Potentiometer_Piher_PT-15-H01_Horizontal +Potentiometer, horizontal, Piher PT-15-H01, http://www.piher-nacesa.com/pdf/14-PT15v03.pdf +Potentiometer horizontal Piher PT-15-H01 +0 +3 +3 +Potentiometer_THT +Potentiometer_Piher_PT-15-H05_Horizontal +Potentiometer, horizontal, Piher PT-15-H05, http://www.piher-nacesa.com/pdf/14-PT15v03.pdf +Potentiometer horizontal Piher PT-15-H05 +0 +3 +3 +Potentiometer_THT +Potentiometer_Piher_PT-15-H06_Horizontal +Potentiometer, horizontal, Piher PT-15-H06, http://www.piher-nacesa.com/pdf/14-PT15v03.pdf +Potentiometer horizontal Piher PT-15-H06 +0 +3 +3 +Potentiometer_THT +Potentiometer_Piher_PT-15-H25_Horizontal +Potentiometer, horizontal, Piher PT-15-H25, http://www.piher-nacesa.com/pdf/14-PT15v03.pdf +Potentiometer horizontal Piher PT-15-H25 +0 +3 +3 +Potentiometer_THT +Potentiometer_Piher_PT-15-V02_Vertical +Potentiometer, vertical, Piher PT-15-V02, http://www.piher-nacesa.com/pdf/14-PT15v03.pdf +Potentiometer vertical Piher PT-15-V02 +0 +3 +3 +Potentiometer_THT +Potentiometer_Piher_PT-15-V02_Vertical_Hole +Potentiometer, vertical, shaft hole, Piher PT-15-V02, http://www.piher-nacesa.com/pdf/14-PT15v03.pdf +Potentiometer vertical hole Piher PT-15-V02 +0 +3 +3 +Potentiometer_THT +Potentiometer_Piher_PT-15-V15_Vertical +Potentiometer, vertical, Piher PT-15-V15, http://www.piher-nacesa.com/pdf/14-PT15v03.pdf +Potentiometer vertical Piher PT-15-V15 +0 +3 +3 +Potentiometer_THT +Potentiometer_Piher_PT-15-V15_Vertical_Hole +Potentiometer, vertical, shaft hole, Piher PT-15-V15, http://www.piher-nacesa.com/pdf/14-PT15v03.pdf +Potentiometer vertical hole Piher PT-15-V15 +0 +3 +3 +Potentiometer_THT +Potentiometer_Piher_T-16H_Double_Horizontal +Potentiometer, horizontal, Piher T-16H Double, http://www.piher-nacesa.com/pdf/22-T16v03.pdf +Potentiometer horizontal Piher T-16H Double +0 +6 +6 +Potentiometer_THT +Potentiometer_Piher_T-16H_Single_Horizontal +Potentiometer, horizontal, Piher T-16H Single, http://www.piher-nacesa.com/pdf/22-T16v03.pdf +Potentiometer horizontal Piher T-16H Single +0 +3 +3 +Potentiometer_THT +Potentiometer_Piher_T-16L_Single_Vertical_Hole +Potentiometer, vertical, shaft hole, Piher T-16L Single, http://www.piher-nacesa.com/pdf/22-T16v03.pdf +Potentiometer vertical hole Piher T-16L Single +0 +3 +3 +Potentiometer_THT +Potentiometer_Runtron_RM-063_Horizontal +Potentiometer, horizontal, Trimmer, RM-063 http://www.runtron.com/down/PDF%20Datasheet/Carbon%20Film%20Potentiometer/RM065%20RM063.pdf +Potentiometer Trimmer RM-063 +0 +3 +3 +Potentiometer_THT +Potentiometer_Runtron_RM-065_Vertical +Potentiometer, vertical, Trimmer, RM-065 https://components101.com/sites/default/files/component_datasheet/Preset%20Potentiometer%20%28Trimpot%29.pdf +Potentiometer Trimmer RM-065 +0 +3 +3 +Potentiometer_THT +Potentiometer_TT_P0915N +http://www.ttelectronics.com/sites/default/files/download-files/Datasheet_PanelPot_P09xSeries.pdf +potentiometer vertical TT P0915N single +0 +5 +3 +Potentiometer_THT +Potentiometer_Vishay_43_Horizontal +Potentiometer, horizontal, Vishay 43, http://www.vishay.com/docs/57026/43.pdf +Potentiometer horizontal Vishay 43 +0 +3 +3 +Potentiometer_THT +Potentiometer_Vishay_148-149_Dual_Horizontal +Potentiometer, horizontal, Vishay 148-149 Dual, http://www.vishay.com/docs/57040/148149.pdf +Potentiometer horizontal Vishay 148-149 Dual +0 +6 +6 +Potentiometer_THT +Potentiometer_Vishay_148-149_Single_Horizontal +Potentiometer, horizontal, Vishay 148-149 Single, http://www.vishay.com/docs/57040/148149.pdf +Potentiometer horizontal Vishay 148-149 Single +0 +3 +3 +Potentiometer_THT +Potentiometer_Vishay_148-149_Single_Vertical +Potentiometer, vertical, Vishay 148-149 Single, http://www.vishay.com/docs/57040/148149.pdf +Potentiometer vertical Vishay 148-149 Single +0 +3 +3 +Potentiometer_THT +Potentiometer_Vishay_148E-149E_Dual_Horizontal +Potentiometer, horizontal, Vishay 148E-149E Dual, http://www.vishay.com/docs/57040/148149.pdf +Potentiometer horizontal Vishay 148E-149E Dual +0 +10 +6 +Potentiometer_THT +Potentiometer_Vishay_148E-149E_Single_Horizontal +Potentiometer, horizontal, Vishay 148E-149E Single, http://www.vishay.com/docs/57040/148149.pdf +Potentiometer horizontal Vishay 148E-149E Single +0 +7 +3 +Potentiometer_THT +Potentiometer_Vishay_248BH-249BH_Single_Horizontal +Potentiometer, horizontal, Vishay 248BH-249BH Single, http://www.vishay.com/docs/57054/248249.pdf +Potentiometer horizontal Vishay 248BH-249BH Single +0 +3 +3 +Potentiometer_THT +Potentiometer_Vishay_248GJ-249GJ_Single_Horizontal +Potentiometer, horizontal, Vishay 248GJ-249GJ Single, http://www.vishay.com/docs/57054/248249.pdf +Potentiometer horizontal Vishay 248GJ-249GJ Single +0 +3 +3 +Potentiometer_THT +Potentiometer_Vishay_248GJ-249GJ_Single_Vertical +Potentiometer, vertical, Vishay 248GJ-249GJ Single, http://www.vishay.com/docs/57054/248249.pdf +Potentiometer vertical Vishay 248GJ-249GJ Single +0 +3 +3 +Potentiometer_THT +Potentiometer_Vishay_T7-YA_Single_Vertical +Potentiometer, vertical, Vishay T7-YA Single, http://www.vishay.com/docs/51015/t7.pdf +Potentiometer vertical Vishay T7-YA Single +0 +3 +3 +Potentiometer_THT +Potentiometer_Vishay_T73XW_Horizontal +Potentiometer, horizontal, Vishay T73XW, http://www.vishay.com/docs/51016/t73.pdf +Potentiometer horizontal Vishay T73XW +0 +3 +3 +Potentiometer_THT +Potentiometer_Vishay_T73XX_Horizontal +Potentiometer, horizontal, Vishay T73XX, http://www.vishay.com/docs/51016/t73.pdf +Potentiometer horizontal Vishay T73XX +0 +3 +3 +Potentiometer_THT +Potentiometer_Vishay_T73YP_Vertical +Potentiometer, vertical, Vishay T73YP, http://www.vishay.com/docs/51016/t73.pdf +Potentiometer vertical Vishay T73YP +0 +3 +3 +R1Go +RESAD1650W70L650D250 +RGP0207CHK1G0 +Resistor +0 +2 +2 +R2.2Ko +RESAD1075W45L335D185 +MFS1/4(Height 0.45mm) +Resistor +0 +2 +2 +R47Ko +RESAD1550W60L630D230 +MF1/4 +Resistor +0 +2 +2 +R47o +RESAD1075W45L335D185 +MFS1/4_20221 +Resistor +0 +2 +2 +R200o +RESAD1075W45L335D185 +MFS1/4_20225 +Resistor +0 +2 +2 +RF +Skyworks_SKY13575_639LF +http://www.skyworksinc.com/uploads/documents/SKY13575_639LF_203270D.pdf +Skyworks +0 +19 +15 +RF +Skyworks_SKY65404-31 +http://www.skyworksinc.com/uploads/documents/SKY65404_31_201512K.pdf +Skyworks +0 +7 +7 +RF_Antenna +AVX_M620720 +868Mhz, 915Mhz ISM antenna, 6 x 2 x 1.08mm, http://datasheets.avx.com/ethertronics/AVX-E_M620720.pdf +868 915 Mhz ISM antenna +0 +6 +3 +RF_Antenna +Abracon_APAES868R8060C16-T +Abracon RHCP ceramic patch antenna 854-882Mhz, 5dBi +APAES patch antenna +0 +1 +1 +RF_Antenna +Abracon_PRO-OB-440 +Abracon OnBoard SMD antenna 2400-2500Mhz, https://abracon.com/datasheets/PRO-OB-440.pdf +2400 PRO-OB-440 Antenna +0 +4 +4 +RF_Antenna +Abracon_PRO-OB-471 +OnBoard 868/915/868+2400 MHz Antenna, https://abracon.com/datasheets/PRO-OB-471.pdf +Antenna ProAnt OnBoard 868Mhz 915Mhz 2400Mhz +0 +6 +6 +RF_Antenna +Antenova_SR4G013_GPS +GPS/GLONASS/Galileo/BeiDou antenna, 1559-1609Mhz, SMD, https://www.application-datasheet.com/pdf/antenova/sr4g013.pdf +antenna GPS Antenova Beltii +0 +5 +2 +RF_Antenna +Astrocast_AST50127-00 +L-band patch antenna, https://docs.astrocast.com/dl/0534-DOC-M2M-ASTRO-Patch_Antenna-Datasheet.pdf +L-band antenna astrocast Patch Antenna +0 +1 +1 +RF_Antenna +Coilcraft_MA5532-AE_RFID +RFID Transponder Coil +antenna rfid coilcraft +0 +2 +2 +RF_Antenna +Johanson_2450AT18x100 +Johanson 2450AT43F0100 SMD antenna 2400-2500Mhz, -0.5dBi, https://www.johansontechnology.com/datasheets/2450AT18A100/2450AT18A100.pdf +antenna +0 +2 +2 +RF_Antenna +Johanson_2450AT43F0100 +Johanson 2450AT43F0100 SMD antenna 2400-2500Mhz, 1dBi, https://www.johansontechnology.com/datasheets/2450AT43F0100/2450AT43F0100.pdf +antenna +0 +2 +2 +RF_Antenna +Molex_47948-0001_2.4Ghz +SMD antenna 2400-2500Mhz, 3.7dBi, https://www.molex.com/content/dam/molex/molex-dot-com/products/automated/en-us/productspecificationpdf/479/47948/PS-47948-001-001.pdf?inline +rf antenna +0 +4 +2 +RF_Antenna +Pulse_W3000 +Pulse Electronics W3000 tri-band antenna for GPS (1.575Ghz), 868Mhz and 2.4Ghz ISM bands, https://productfinder.pulseeng.com/products/datasheets/W3000.pdf +Antenna GPS 868Mhz ISM 1.575Ghz +0 +2 +2 +RF_Antenna +Pulse_W3011 +Pulse RF Antenna, 4mm Clearance +antenna rf +0 +3 +2 +RF_Antenna +Texas_SWRA117D_2.4GHz_Left +http://www.ti.com/lit/an/swra117d/swra117d.pdf +PCB antenna +0 +2 +2 +RF_Antenna +Texas_SWRA117D_2.4GHz_Right +http://www.ti.com/lit/an/swra117d/swra117d.pdf +PCB antenna +0 +2 +2 +RF_Antenna +Texas_SWRA416_868MHz_915MHz +http://www.ti.com/lit/an/swra416/swra416.pdf +PCB antenna +0 +20 +1 +RF_Converter +Anaren_0805_2012Metric-6 +https://cdn.anaren.com/product-documents/Xinger/DirectionalCouplers/DC4759J5020AHF/DC4759J5020AHF_DataSheet(Rev_E).pdf +coupler rf +0 +6 +6 +RF_Converter +Balun_Johanson_1.6x0.8mm +6-pin 1.6x0.8 mm balun footprint +Johanson balun filter +0 +6 +6 +RF_Converter +Balun_Johanson_0896BM15A0001 +https://www.johansontechnology.com/datasheets/0896BM15A0001/0896BM15A0001.pdf +balun RF +0 +6 +6 +RF_Converter +Balun_Johanson_0900FM15K0039 +Johanson 0900FM15K0039 DFN, 10 Pin (https://www.johansontechnology.com/datasheets/0900FM15K0039/0900FM15K0039.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +Johanson DFN NoLead +0 +10 +10 +RF_Converter +Balun_Johanson_0900PC15J0013 +Johanson 0900PC15J0013 DFN, 10 Pin (https://www.johansontechnology.com/datasheets/0900PC15J0013/0900PC15J0013.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +Johanson DFN NoLead +0 +10 +10 +RF_Converter +Balun_Johanson_5400BL15B050E +https://www.johansontechnology.com/datasheets/5400BL15B050/5400BL15B050.pdf +balun RF +0 +6 +6 +RF_Converter +RF_Attenuator_Susumu_PAT1220 +http://www.susumu-usa.com/pdf/Foot_Print_38.pdf, https://www.susumu.co.jp/common/pdf/n_catalog_partition16_en.pdf +2mm 1.2mm +0 +3 +3 +RF_GPS +Linx_RXM-GPS +GPS Module, Linx (https://linxtechnologies.com/wp/wp-content/uploads/rxm-gps-rm.pdf) +gps linx +0 +22 +22 +RF_GPS +Quectel_L70-R +Quectel L70-R, (https://www.quectel.com/product/gps-only-l70-r) +GPS Quectel L70-R +0 +18 +18 +RF_GPS +Quectel_L80-R +Quectel L80-R GPS Module, Patch on Top, https://www.quectel.com/UploadImage/Downlad/Quectel_L80-R_Hardware_Design_V1.2.pdf +quectel GPS GNSS +0 +12 +12 +RF_GPS +SIM28ML +https://simcom.ee/documents/SIM28ML/SIM28ML_Hardware%20Design_V1.01.pdf +SIM28ML GPS +0 +18 +18 +RF_GPS +Sierra_XA11X0 +QFN-24, Pitch 1.20 no EP, https://source.sierrawireless.com/resources/airprime/hardware_specs_user_guides/airprime_xm1100_product_technical_specification +QFN-24 P1.20 +0 +24 +24 +RF_GPS +Sierra_XM11X0 +QFN-20, Pitch 1.20 no EP, https://source.sierrawireless.com/resources/airprime/hardware_specs_user_guides/airprime_xm1100_product_technical_specification +QFN-20 P1.20 +0 +20 +20 +RF_GPS +ublox_LEA +ublox LEA 6/7/8, (https://www.u-blox.com/sites/default/files/LEA-M8S-M8T-FW3_HardwareIntegrationManual_%28UBX-15030060%29.pdf) +GPS ublox LEA 6/7/8 +0 +28 +28 +RF_GPS +ublox_MAX +ublox MAX 6/7/8, (https://www.u-blox.com/sites/default/files/MAX-8-M8-FW3_HardwareIntegrationManual_%28UBX-15030059%29.pdf) +GPS ublox MAX 6/7/8 +0 +18 +18 +RF_GPS +ublox_NEO +ublox NEO 6/7/8, (https://www.u-blox.com/sites/default/files/NEO-8Q-NEO-M8-FW3_HardwareIntegrationManual_%28UBX-15029985%29_0.pdf) +GPS ublox NEO 6/7/8 +0 +24 +24 +RF_GPS +ublox_SAM-M8Q +GPS Module, 15.5x15.5x6.3mm, https://www.u-blox.com/sites/default/files/SAM-M8Q_HardwareIntegrationManual_%28UBX-16018358%29.pdf +ublox SAM-M8Q +0 +100 +20 +RF_GPS +ublox_SAM-M8Q_HandSolder +GPS Module, 15.5x15.5x6.3mm, https://www.u-blox.com/sites/default/files/SAM-M8Q_HardwareIntegrationManual_%28UBX-16018358%29.pdf +ublox SAM-M8Q +0 +20 +20 +RF_GPS +ublox_ZED +ublox ZED-F9, https://www.u-blox.com/sites/default/files/ZED-F9P_DataSheet_%28UBX-17051259%29.pdf +GPS GNSS ublox ZED +0 +102 +55 +RF_GSM +Quectel_BC66 +GSM NB-IoT module, 15.8x17.7x2mm, https://www.quectel.com/UploadImage/Downlad/Quectel_BC66_Hardware_Design_V1.1.pdf +GSM NB-IoT Module BC66 M66 +0 +116 +58 +RF_GSM +Quectel_BC95 +GSM NB-IoT module, 19.9x23.6x2.2mm, https://www.quectel.com/UploadImage/Downlad/Quectel_BC95_Hardware_Design_V1.3.pdf +GSM NB-IoT module BC95 +0 +188 +94 +RF_GSM +Quectel_BG96 +Quectel BG96 Cellular GSM 2G Module https://www.quectel.com/download/quectel_bg96_hardware_design_v1-4 +Quectel BG96 Cellular GSM 2G Module +0 +204 +102 +RF_GSM +Quectel_M95 +Quad-Band GSM/GPRS module, 19.9x23.6x2.65mm, https://www.quectel.com/UploadImage/Downlad/M95_Hardware_Design_V1.3.pdf +GSM Module M95 +0 +84 +42 +RF_GSM +SIMCom_SIM800C +Quad-Band GSM/GPRS module, 17.6x15.7x2.3mm, http://simcom.ee/documents/SIM800C/SIM800C_Hardware_Design_V1.05.pdf +GSM Module SIM800C +0 +84 +42 +RF_GSM +SIMCom_SIM900 +Quad-Band GSM/GPRS module, 24x24x3mm, http://simcom.ee/documents/SIM900/SIM900_Hardware%20Design_V2.05.pdf +GSM Module SIM900 +0 +68 +68 +RF_GSM +Telit_xL865 +Telit xL865 familly footprint, http://www.telit.com/fileadmin/user_upload/products/Downloads/3G/Telit_UL865_Hardware_User_Guide_r8.pdf +xL865 gsm umts +0 +52 +48 +RF_GSM +ublox_SARA-G3_LGA-96 +ublox Sara GSM/HSPA modem, https://www.u-blox.com/sites/default/files/SARA-G3-U2_SysIntegrManual_%28UBX-13000995%29.pdf, pag.162 +ublox SARA-G3 SARA-U2 GSM HSPA +0 +192 +96 +RF_Mini-Circuits +Mini-Circuits_BK377 +Footprint for Mini-Circuits case BK377 (https://ww2.minicircuits.com/case_style/BK276.pdf) +Mini-circuits BK377 +0 +14 +14 +RF_Mini-Circuits +Mini-Circuits_BK377_LandPatternPL-005 +Footprint for Mini-Circuits case BK377 (https://ww2.minicircuits.com/case_style/BK276.pdf) according to land-pattern PL-005, including GND vias (https://ww2.minicircuits.com/pcb/98-pl005.pdf) +Mini-circuits VCXO JTOS PL-005 +0 +50 +14 +RF_Mini-Circuits +Mini-Circuits_CD541_H2.08mm +https://ww2.minicircuits.com/case_style/CD541.pdf +RF Transformer +0 +6 +6 +RF_Mini-Circuits +Mini-Circuits_CD542_H2.84mm +https://ww2.minicircuits.com/case_style/CD542.pdf +RF Transformer +0 +6 +6 +RF_Mini-Circuits +Mini-Circuits_CD542_LandPatternPL-052 +Footprint for Mini-Circuits case CD542 (https://ww2.minicircuits.com/case_style/CD542.pdf) using land-pattern PL-052, including GND-vias (https://ww2.minicircuits.com/pcb/98-pl052.pdf) +MiniCircuits PL-052 CD542 +0 +17 +6 +RF_Mini-Circuits +Mini-Circuits_CD542_LandPatternPL-094 +Footprint for mini circuit case CD542, Land pattern PL-094, pads 5 and 2 connected via insulated copper area below body, vias included (case drawing: https://ww2.minicircuits.com/case_style/CD542.pdf, land pattern drawing: https://ww2.minicircuits.com/pcb/98-pl094.pdf) +mini-circuits CD542 pl-094 +0 +18 +6 +RF_Mini-Circuits +Mini-Circuits_CD636_H4.11mm +https://ww2.minicircuits.com/case_style/CD636.pdf +RF Transformer +0 +6 +6 +RF_Mini-Circuits +Mini-Circuits_CD636_LandPatternPL-035 +Footprint for Mini-Circuits case CD636 (https://ww2.minicircuits.com/case_style/CD636.pdf) following land pattern PL-035, including GND-vias (https://ww2.minicircuits.com/pcb/98-pl035.pdf) +mini-circuits pl-035 CD636 +0 +13 +6 +RF_Mini-Circuits +Mini-Circuits_CD637_H5.23mm +https://ww2.minicircuits.com/case_style/CD637.pdf +RF Transformer +0 +6 +6 +RF_Mini-Circuits +Mini-Circuits_CK605 +Footprint for Mini-Circuits case CK605 (https://ww2.minicircuits.com/case_style/CK605.pdf) +Mini-Circuits CK605 +0 +16 +16 +RF_Mini-Circuits +Mini-Circuits_CK605_LandPatternPL-012 +Footprint for Mini-Circuits case CK605 (https://ww2.minicircuits.com/case_style/CK605.pdf) following land pattern PL-012, including GND vias (https://ww2.minicircuits.com/pcb/98-pl012.pdf) +Mini-Circuits PL-012 +0 +53 +16 +RF_Mini-Circuits +Mini-Circuits_DB1627 +Mini-Circuits top-hat case DB1627 (https://ww2.minicircuits.com/case_style/DB1627.pdf) +Mini-Circuits DB1627 +0 +6 +6 +RF_Mini-Circuits +Mini-Circuits_GP731 +Footprint for Mini-Circuits case GP731 (https://ww2.minicircuits.com/case_style/GP731.pdf) +Mini-Circuits GP731 +0 +8 +8 +RF_Mini-Circuits +Mini-Circuits_GP731_LandPatternPL-176 +Footprint for Mini-Circuits case GP731 (https://ww2.minicircuits.com/case_style/GP731.pdf) following land pattern PL-176, including GND vias (https://www.minicircuits.com/pcb/98-pl176.pdf) +mini-circuits PL-176 +0 +21 +8 +RF_Mini-Circuits +Mini-Circuits_GP1212 +Footprint for Mini-Circuits case GP1212 (https://ww2.minicircuits.com/case_style/GP731.pdf) +mini-circuits GP1212 +0 +8 +8 +RF_Mini-Circuits +Mini-Circuits_GP1212_LandPatternPL-176 +Footprint for Mini-Circuits case GP1212 (https://ww2.minicircuits.com/case_style/GP731.pdf) following land pattern PL-176, including GND vias (https://www.minicircuits.com/pcb/98-pl176.pdf) +mini-circuits PL-176 +0 +21 +8 +RF_Mini-Circuits +Mini-Circuits_HF1139 +Footprint for Mini-Circuits case HF1139 (https://ww2.minicircuits.com/case_style/HF1139.pdf) +Mini-Circuits HF1139 +0 +8 +8 +RF_Mini-Circuits +Mini-Circuits_HF1139_LandPatternPL-230 +Footprint for Mini-Circuits case HF1139 (https://ww2.minicircuits.com/case_style/HF1139.pdf) following land pattern PL-230, including GND vias (https://ww2.minicircuits.com/pcb/98-pl230.pdf) +Mini-Circuits PL-230 +0 +37 +8 +RF_Mini-Circuits +Mini-Circuits_HQ1157 +Footprint for Mini-Circuits case HQ1157 (https://www.minicircuits.com/case_style/HQ1157.pdf) +Mini-Circuits HQ1157 +0 +14 +14 +RF_Mini-Circuits +Mini-Circuits_HZ1198 +Footprint for Mini-Circuits case HZ1198 (https://ww2.minicircuits.com/case_style/HZ1198.pdf) +Mini-Circuits HZ1198 +0 +6 +6 +RF_Mini-Circuits +Mini-Circuits_HZ1198_LandPatternPL-247 +Footprint for Mini-Circuits cas HZ1198 (https://ww2.minicircuits.com/case_style/HZ1198.pdf) following land pattern PL-247, including GND-vias (https://www.minicircuits.com/pcb/98-pl247.pdf) +Mini-Circuits PL-247 HZ1198 +0 +40 +6 +RF_Mini-Circuits +Mini-Circuits_MMM168 +Footprint for Mini-Circuits case MMM168 (https://ww2.minicircuits.com/case_style/MMM168.pdf) +Mini-Circuits MMM168 +0 +4 +4 +RF_Mini-Circuits +Mini-Circuits_MMM168_LandPatternPL-225 +Footprint for Mini-Circuits case MMM168, Land pattern PL-225, vias included, (case drawing: https://ww2.minicircuits.com/case_style/MMM168.pdf, land pattern drawing: https://ww2.minicircuits.com/pcb/98-pl225.pdf) +pl-225 +0 +10 +4 +RF_Mini-Circuits +Mini-Circuits_QQQ130_ClockwisePinNumbering +Footprint for Mini-Circuits case QQQ130 (https://ww2.minicircuits.com/case_style/QQQ130.pdf) +Mini-Circuits QQQ130 +0 +6 +6 +RF_Mini-Circuits +Mini-Circuits_QQQ130_LandPattern_PL-236_ClockwisePinNumbering +Footprint for Mini-Circuits case QQQ130 (https://ww2.minicircuits.com/case_style/QQQ130.pdf) following land pattern PL-236, including GND vias (https://ww2.minicircuits.com/pcb/98-pl236.pdf) +Mini-Circuits PL-236 +0 +14 +6 +RF_Mini-Circuits +Mini-Circuits_TT1224_ClockwisePinNumbering +Footprint for Mini-Circuits case TT1224 (https://ww2.minicircuits.com/case_style/TT1224.pdf) following land-pattern PL-258, including GND-vias (https://www.minicircuits.com/pcb/98-pl258.pdf) +Mini-Circuits TT1224 +0 +6 +6 +RF_Mini-Circuits +Mini-Circuits_TT1224_LandPatternPL-258_ClockwisePinNumbering +Footprint for Mini-Circuits case TT1224 (https://ww2.minicircuits.com/case_style/TT1224.pdf) following land-pattern PL-258, including GND-vias (https://www.minicircuits.com/pcb/98-pl258.pdf) +PL-258 Mini-Circuits +0 +26 +6 +RF_Mini-Circuits +Mini-Circuits_TTT167 +Footprint for Mini-Circuits case TTT167 (https://ww2.minicircuits.com/case_style/TTT167.pdf) +Mini-Circuits TTT167 +0 +6 +6 +RF_Mini-Circuits +Mini-Circuits_TTT167_LandPatternPL-079 +Footprint for Mini-Circuits case TTT167 (Mini-Circuits_TTT167_LandPatternPL-079) following land pattern PL-079, including GND vias (https://ww2.minicircuits.com/pcb/98-pl079.pdf) +Mini-Circuits PL-079 +0 +36 +6 +RF_Mini-Circuits +Mini-Circuits_YY161 +Footprint for Mini-Circuits case YY161 (https://ww2.minicircuits.com/case_style/YY161.pdf) +Mini-Circuits YY161 +0 +8 +8 +RF_Mini-Circuits +Mini-Circuits_YY161_LandPatternPL-049 +Footprint for Mini-Circuits case YY161 (https://ww2.minicircuits.com/case_style/YY161.pdf) using land-pattern PL-049, including GND-connections and vias (https://ww2.minicircuits.com/pcb/98-pl049.pdf) +mini-circuits pl-049 +0 +36 +8 +RF_Module +Ai-Thinker-Ra-01-LoRa +Ai Thinker Ra-01 LoRa +LoRa Ra-01 +0 +16 +16 +RF_Module +Astrocast_AST50147-00 +L-band satellite communication module, https://docs.astrocast.com/dl/0532-DOC-M2M-ASTRO-Astronode_S-Datasheet.pdf +RF module Astrocast radio Astronode +0 +38 +38 +RF_Module +Atmel_ATSAMR21G18-MR210UA_NoRFPads +http://ww1.microchip.com/downloads/en/devicedoc/atmel-42475-atsamr21g18-mr210ua_datasheet.pdf +module wireless zigbee 802.15.4 flash crypto ATSAMR21G18 AT45DB041E TECC508A U.Fi +0 +42 +42 +RF_Module +BLE112-A +Class 4 Bluetooth Module with on-board antenna +Bluetooth Module +0 +30 +30 +RF_Module +BM78SPPS5xC2 +Bluetooth Dual-mode module with integral chip antenna (http://ww1.microchip.com/downloads/en/DeviceDoc/60001380C.pdf) +Bluetooth BR/EDR BLE +0 +33 +33 +RF_Module +CMWX1ZZABZ +https://wireless.murata.com/RFM/data/type_abz.pdf +iot lora sigfox +0 +57 +57 +RF_Module +CYBLE-21Pin-10x10mm +Cypress EZ-BLE PRoC Module (Bluetooth Smart) 21 Pin Module +Cypress BT Bluetooth +0 +21 +21 +RF_Module +DWM1000 +IEEE802.15.4-2011 UWB +UWB Module +0 +24 +24 +RF_Module +DecaWave_DWM1001 +https://www.decawave.com/sites/default/files/dwm1001_datasheet.pdf +UWB module +0 +34 +34 +RF_Module +Digi_XBee_SMT +http://www.digi.com/resources/documentation/digidocs/pdfs/90002126.pdf http://ftp1.digi.com/support/documentation/90001020_F.pdf +Digi XBee SMT RF +0 +37 +37 +RF_Module +E18-MS1-PCB +http://www.cdebyte.com/en/downpdf.aspx?id=122 +Zigbee +0 +24 +24 +RF_Module +E73-2G4M04S +http://www.cdebyte.com/en/downpdf.aspx?id=243 +BLE BLE5 nRF52832 +0 +44 +44 +RF_Module +ESP-07 +Wi-Fi Module, http://wiki.ai-thinker.com/_media/esp8266/docs/a007ps01a2_esp-07_product_specification_v1.2.pdf +Wi-Fi Module +0 +16 +16 +RF_Module +ESP-12E +Wi-Fi Module, http://wiki.ai-thinker.com/_media/esp8266/docs/aithinker_esp_12f_datasheet_en.pdf +Wi-Fi Module +0 +22 +22 +RF_Module +ESP-WROOM-02 +https://www.espressif.com/sites/default/files/documentation/0c-esp-wroom-02_datasheet_en.pdf +ESP WROOM-02 espressif esp8266ex +0 +19 +19 +RF_Module +ESP32-S2-MINI-1 +2.4 GHz Wi-Fi and Bluetooth combo chip, external antenna, https://www.espressif.com/sites/default/files/documentation/esp32-s3-mini-1_mini-1u_datasheet_en.pdf +2.4 GHz Wi-Fi Bluetooth external antenna espressif 20*15.4mm +0 +73 +65 +RF_Module +ESP32-S2-MINI-1U +2.4 GHz Wi-Fi and Bluetooth combo chip, external antenna, https://www.espressif.com/sites/default/files/documentation/esp32-s3-mini-1_mini-1u_datasheet_en.pdf +2.4 GHz Wi-Fi Bluetooth external antenna espressif 15.4*15.4mm +0 +73 +65 +RF_Module +ESP32-S2-WROVER +ESP32-S2-WROVER(-I) 2.4 GHz Wi-Fi https://www.espressif.com/sites/default/files/documentation/esp32-s2-wroom_esp32-s2-wroom-i_datasheet_en.pdf +ESP32-S2 ESP32 WIFI +0 +43 +43 +RF_Module +ESP32-S3-WROOM-1 +2.4 GHz Wi-Fi and Bluetooth module https://www.espressif.com/sites/default/files/documentation/esp32-s3-wroom-1_wroom-1u_datasheet_en.pdf +2.4 GHz Wi-Fi and Bluetooth module +0 +62 +41 +RF_Module +ESP32-S3-WROOM-1U +2.4 GHz Wi-Fi and Bluetooth module https://www.espressif.com/sites/default/files/documentation/esp32-s3-wroom-1_wroom-1u_datasheet_en.pdf +2.4 GHz Wi-Fi and Bluetooth module +0 +62 +41 +RF_Module +ESP32-WROOM-32 +Single 2.4 GHz Wi-Fi and Bluetooth combo chip https://www.espressif.com/sites/default/files/documentation/esp32-wroom-32_datasheet_en.pdf +Single 2.4 GHz Wi-Fi and Bluetooth combo chip +0 +60 +39 +RF_Module +ESP32-WROOM-32D +2.4 GHz Wi-Fi and Bluetooth module, https://www.espressif.com/sites/default/files/documentation/esp32-wroom-32d_esp32-wroom-32u_datasheet_en.pdf +2.4 GHz Wi-Fi and Bluetooth module ESP32-D0WD Espressif ESP32-WROOM-32E +0 +60 +39 +RF_Module +ESP32-WROOM-32U +Single 2.4 GHz Wi-Fi and Bluetooth combo chip with U.FL connector, https://www.espressif.com/sites/default/files/documentation/esp32-wroom-32d_esp32-wroom-32u_datasheet_en.pdf +Single 2.4 GHz Wi-Fi and Bluetooth combo chip +0 +60 +39 +RF_Module +ESP32-WROOM-32UE +2.4 GHz Wi-Fi and Bluetooth module, https://www.espressif.com/sites/default/files/documentation/esp32-wroom-32e_esp32-wroom-32ue_datasheet_en.pdf +2.4 GHz Wi-Fi and Bluetooth module +0 +60 +39 +RF_Module +Garmin_M8-35_9.8x14.0mm_Layout6x6_P1.5mm +D52M ANT SoC Module https://www.thisisant.com/assets/resources/D00001687_D52_Module_Datasheet.v.2.3_(Garmin).pdf +RF SoC Radio ANT Bluetooth BLE D52 nRF52 Garmin Canada Dynastream Nordic +0 +35 +35 +RF_Module +HOPERF_RFM9XW_SMD +Low Power Long Range Transceiver Module SMD-16 (https://www.hoperf.com/data/upload/portal/20181127/5bfcbea20e9ef.pdf) +LoRa Low Power Long Range Transceiver Module +0 +16 +16 +RF_Module +HOPERF_RFM9XW_THT +Low Power Long Range Transceiver Module THT-16 (https://www.hoperf.com/data/upload/portal/20181127/5bfcbea20e9ef.pdf) +Low Power Long Range Transceiver Module LoRa +0 +16 +16 +RF_Module +HOPERF_RFM69HW +Radio, RF, Module, http://www.hoperf.com/upload/rf/RFM69HW-V1.3.pdf +Radio RF Module +0 +16 +16 +RF_Module +Heltec_HT-CT62 +HT-CT62 LoRa Module +LoRa WiFi Heltec HT-CT62 ESP32C3 +0 +22 +22 +RF_Module +IQRF_TRx2DA_KON-SIM-01 +8 pin SIM connector for IQRF TR-x2DA(T) modules, http://iqrf.org/weben/downloads.php?id=104 +IQRF_KON-SIM-01 IQRF_TRx2DA +0 +10 +8 +RF_Module +IQRF_TRx2D_KON-SIM-01 +8 pin SIM connector for IQRF TR-x2D(C)(T) modules, http://iqrf.org/weben/downloads.php?id=104 +IQRF_KON-SIM-01 IQRF_TRx2D IQRF_TRx2DC +0 +10 +8 +RF_Module +Laird_BL652 +Bluetooth v4.2 + NFC module +Bluetooth BLE NFC +0 +39 +39 +RF_Module +MOD-nRF8001 +BLE module, https://www.olimex.com/Products/Modules/RF/MOD-nRF8001/ +BLE module +0 +11 +11 +RF_Module +Microchip_BM83 +Microchip BM83, Bluetooth 5.0 Stereo Audio Module with on-Board antenna, https://ww1.microchip.com/downloads/aemDocuments/documents/WSG/ProductDocuments/DataSheets/70005402E.pdf +bluetooth module +0 +52 +52 +RF_Module +Microchip_RN4871 +Microchip RN4871 footprint +RN4871 BLE +0 +16 +16 +RF_Module +Modtronix_inAir9 +Modtronix Wireless SX1276 LoRa Module (http://modtronix.com/img/prod/imod/inair9/inair_dimensions.gif) +Modtronix LoRa inAir inAir9 SX1276 RF 915MHz 868MHz Wireless +0 +14 +14 +RF_Module +MonoWireless_TWE-L-WX +https://www.mono-wireless.com/jp/products/TWE-LITE/MW-PDS-TWELITE-JP.pdf +TWE-L-WX +0 +32 +32 +RF_Module +NINA-B111 +NINA-B111 LGA module 42 Pin https://content.u-blox.com/sites/default/files/NINA-B1_DataSheet_UBX-15019243.pdf#page=30 +NINA ublox u-blox b111 bluetooth nrf52840 module +0 +42 +42 +RF_Module +Particle_P1 +https://docs.particle.io/datasheets/p1-datasheet/ +Particle P1 +0 +75 +75 +RF_Module +RAK811 +RAK811 LPWAN Module https://downloads.rakwireless.com/LoRa/RAK811/Hardware_Specification/RAK811_LoRa_Module_Datasheet_V1.4.pdf +LoRa LoRaWAN RAK811 +0 +34 +34 +RF_Module +RAK4200 +RAK4200 LPWAN Module https://downloads.rakwireless.com/LoRa/RAK4200/Hardware-Specification/RAK4200_Module_Specifications_V1.4.pdf +LoRa LoRaWAN RAK4200 +0 +20 +20 +RF_Module +RFDigital_RFD77101 +RFDigital RFD77101 Simblee +RFDigital RFD77101 Simblee +0 +45 +45 +RF_Module +RN42 +Class 2 Bluetooth Module with on-board antenna +Bluetooth Module +0 +36 +33 +RF_Module +RN42N +Class 2 Bluetooth Module without antenna +Bluetooth Module +0 +39 +36 +RF_Module +RN2483 +Low-Power Long Range LoRa Transceiver Module +rf module lora lorawan +0 +47 +47 +RF_Module +Raytac_MDBT50Q +Multiprotocol radio SoC module https://www.raytac.com/download/index.php?index_id=43 +wireless 2.4 GHz Bluetooth ble zigbee 802.15.4 thread nordic raytac nrf52840 nrf52833 +0 +61 +61 +RF_Module +ST-SiP-LGA-86-11x7.3mm +STM32WB5MMG Module, LGA86L 11x7.3 +bluetooth bluetooth5 bluetooth5.0 802.15.4 zigbee thread module stm32 rf +0 +86 +86 +RF_Module +ST_SPBTLE +Bluetooth Low Energy Module +ble module st bluetooth +0 +11 +11 +RF_Module +TD1205 +https://github.com/Telecom-Design/Documentation_TD_RF_Module/blob/master/TD1205%20Datasheet.pdf +SIGFOX Module +0 +9 +9 +RF_Module +TD1208 +https://github.com/Telecom-Design/Documentation_TD_RF_Module/blob/master/TD1208%20Datasheet.pdf +SIGFOX Module +0 +25 +25 +RF_Module +Taiyo-Yuden_EYSGJNZWY +Taiyo Yuden NRF51822 Module Bluetooth https://www.yuden.co.jp/wireless_module/document/datareport2/en/TY_BLE_EYSGJNZ_DataReport_V1_9_20180530E.pdf +Taiyo Yuden NRF51822 Module Bluetooth +0 +30 +28 +RF_Module +ZETA-433-SO_SMD +RF transceiver SMD style https://www.rfsolutions.co.uk/downloads/1456219226DS-ZETA.pdf +RF transceiver SMD style +0 +12 +12 +RF_Module +ZETA-433-SO_THT +RF transceiver THT style https://www.rfsolutions.co.uk/downloads/1456219226DS-ZETA.pdf +RF transceiver SMD style +0 +12 +12 +RF_Module +nRF24L01_Breakout +nRF24L01 breakout board +nRF24L01 adapter breakout +0 +8 +8 +RF_Shielding +Laird_Technologies_97-2002_25.40x25.40mm +Laird Technologies 97-2002 EZ PEEL Shielding Cabinet One Piece SMD 25.40x25.40mm (https://assets.lairdtech.com/home/brandworld/files/Board%20Level%20Shields%20Catalog%20Download.pdf) +Shielding Cabinet +0 +8 +1 +RF_Shielding +Laird_Technologies_97-2003_12.70x13.37mm +Laird Technologies 97-2003 EZ PEEL Shielding Cabinet One Piece SMD 12.70x13.37mm (https://assets.lairdtech.com/home/brandworld/files/Board%20Level%20Shields%20Catalog%20Download.pdf) +Shielding Cabinet +0 +8 +1 +RF_Shielding +Laird_Technologies_BMI-S-101_13.66x12.70mm +Laird Technologies BMI-S-101 Shielding Cabinet One Piece SMD 13.66x12.70mm (https://assets.lairdtech.com/home/brandworld/files/Board%20Level%20Shields%20Catalog%20Download.pdf) +Shielding Cabinet +0 +16 +1 +RF_Shielding +Laird_Technologies_BMI-S-102_16.50x16.50mm +Laird Technologies BMI-S-102 Shielding Cabinet One Piece SMD 16.50x16.50mm (https://assets.lairdtech.com/home/brandworld/files/Board%20Level%20Shields%20Catalog%20Download.pdf) +Shielding Cabinet +0 +16 +1 +RF_Shielding +Laird_Technologies_BMI-S-103_26.21x26.21mm +Laird Technologies BMI-S-103 Shielding Cabinet One Piece SMD 26.21x26.21mm (https://assets.lairdtech.com/home/brandworld/files/Board%20Level%20Shields%20Catalog%20Download.pdf) +Shielding Cabinet +0 +24 +1 +RF_Shielding +Laird_Technologies_BMI-S-104_32.00x32.00mm +Laird Technologies BMI-S-104 Shielding Cabinet One Piece SMD 32.00x32.00mm (https://assets.lairdtech.com/home/brandworld/files/Board%20Level%20Shields%20Catalog%20Download.pdf) +Shielding Cabinet +0 +28 +1 +RF_Shielding +Laird_Technologies_BMI-S-105_38.10x25.40mm +Laird Technologies BMI-S-105 Shielding Cabinet One Piece SMD 38.10x25.40mm (https://assets.lairdtech.com/home/brandworld/files/Board%20Level%20Shields%20Catalog%20Download.pdf) +Shielding Cabinet +0 +28 +1 +RF_Shielding +Laird_Technologies_BMI-S-106_36.83x33.68mm +Laird Technologies BMI-S-106 Shielding Cabinet One Piece SMD 36.83x33.68mm (https://assets.lairdtech.com/home/brandworld/files/Board%20Level%20Shields%20Catalog%20Download.pdf) +Shielding Cabinet +0 +28 +1 +RF_Shielding +Laird_Technologies_BMI-S-107_44.37x44.37mm +Laird Technologies BMI-S-107 Shielding Cabinet One Piece SMD 44.37x44.37mm (https://assets.lairdtech.com/home/brandworld/files/Board%20Level%20Shields%20Catalog%20Download.pdf) +Shielding Cabinet +0 +36 +1 +RF_Shielding +Laird_Technologies_BMI-S-201-F_13.66x12.70mm +Laird Technologies BMI-S-201-F Shielding Cabinet Two Piece SMD 13.66x12.70mm (https://assets.lairdtech.com/home/brandworld/files/Board%20Level%20Shields%20Catalog%20Download.pdf) +Shielding Cabinet +0 +16 +1 +RF_Shielding +Laird_Technologies_BMI-S-202-F_16.50x16.50mm +Laird Technologies BMI-S-202-F Shielding Cabinet Two Piece SMD 16.50x16.50mm (https://assets.lairdtech.com/home/brandworld/files/Board%20Level%20Shields%20Catalog%20Download.pdf) +Shielding Cabinet +0 +16 +1 +RF_Shielding +Laird_Technologies_BMI-S-203-F_26.21x26.21mm +Laird Technologies BMI-S-203-F Shielding Cabinet Two Piece SMD 26.21x26.21mm (https://assets.lairdtech.com/home/brandworld/files/Board%20Level%20Shields%20Catalog%20Download.pdf) +Shielding Cabinet +0 +24 +1 +RF_Shielding +Laird_Technologies_BMI-S-204-F_32.00x32.00mm +Laird Technologies BMI-S-204-F Shielding Cabinet Two Piece SMD 32.00x32.00mm (https://assets.lairdtech.com/home/brandworld/files/Board%20Level%20Shields%20Catalog%20Download.pdf) +Shielding Cabinet +0 +28 +1 +RF_Shielding +Laird_Technologies_BMI-S-205-F_38.10x25.40mm +Laird Technologies BMI-S-205-F Shielding Cabinet Two Piece SMD 38.10x25.40mm (https://assets.lairdtech.com/home/brandworld/files/Board%20Level%20Shields%20Catalog%20Download.pdf) +Shielding Cabinet +0 +28 +1 +RF_Shielding +Laird_Technologies_BMI-S-206-F_36.83x33.68mm +Laird Technologies BMI-S-206-F Shielding Cabinet Two Piece SMD 36.83x33.68mm (https://assets.lairdtech.com/home/brandworld/files/Board%20Level%20Shields%20Catalog%20Download.pdf) +Shielding Cabinet +0 +28 +1 +RF_Shielding +Laird_Technologies_BMI-S-207-F_44.37x44.37mm +Laird Technologies BMI-S-207-F Shielding Cabinet Two Piece SMD 44.37x44.37mm (https://assets.lairdtech.com/home/brandworld/files/Board%20Level%20Shields%20Catalog%20Download.pdf) +Shielding Cabinet +0 +36 +1 +RF_Shielding +Laird_Technologies_BMI-S-208-F_39.60x39.60mm +Laird Technologies BMI-S-208-F Shielding Cabinet Two Piece SMD 39.60x39.60mm (https://assets.lairdtech.com/home/brandworld/files/Board%20Level%20Shields%20Catalog%20Download.pdf) +Shielding Cabinet +0 +32 +1 +RF_Shielding +Laird_Technologies_BMI-S-209-F_29.36x18.50mm +Laird Technologies BMI-S-209-F Shielding Cabinet Two Piece SMD 29.36x18.50mm (https://assets.lairdtech.com/home/brandworld/files/Board%20Level%20Shields%20Catalog%20Download.pdf) +Shielding Cabinet +0 +20 +1 +RF_Shielding +Laird_Technologies_BMI-S-210-F_44.00x30.50mm +Laird Technologies BMI-S-210-F Shielding Cabinet Two Piece SMD 44.00x30.50mm (https://assets.lairdtech.com/home/brandworld/files/Board%20Level%20Shields%20Catalog%20Download.pdf) +Shielding Cabinet +0 +32 +1 +RF_Shielding +Laird_Technologies_BMI-S-230-F_50.8x38.1mm +Laird Technologies BMI-S-230-F Shielding Cabinet Two Piece SMD 50.8x38.1mm +Shielding Cabinet +0 +36 +1 +RF_Shielding +Wuerth_36103205_20x20mm +WE-SHC Shielding Cabinet SMD 20x20mm +Shielding Cabinet +0 +20 +1 +RF_Shielding +Wuerth_36103255_25x25mm +WE-SHC Shielding Cabinet SMD 25x25mm +Shielding Cabinet +0 +24 +1 +RF_Shielding +Wuerth_36103305_30x30mm +WE-SHC Shielding Cabinet SMD 30x30mm +Shielding Cabinet +0 +28 +1 +RF_Shielding +Wuerth_36103505_50x50mm +WE-SHC Shielding Cabinet SMD 50x50mm +Shielding Cabinet +0 +44 +1 +RF_Shielding +Wuerth_36103605_60x60mm +WE-SHC Shielding Cabinet SMD 60x60mm +Shielding Cabinet +0 +52 +1 +RF_Shielding +Wuerth_36503205_20x20mm +WE-SHC Shielding Cabinet THT 21x21mm +Shielding Cabinet +0 +16 +1 +RF_Shielding +Wuerth_36503255_25x25mm +WE-SHC Shielding Cabinet THT 26x26mm +Shielding Cabinet +0 +20 +1 +RF_Shielding +Wuerth_36503305_30x30mm +WE-SHC Shielding Cabinet THT 31x31mm +Shielding Cabinet +0 +24 +1 +RF_Shielding +Wuerth_36503505_50x50mm +WE-SHC Shielding Cabinet THT 51x51mm +Shielding Cabinet +0 +40 +1 +RF_Shielding +Wuerth_36503605_60x60mm +WE-SHC Shielding Cabinet THT 61x61mm +Shielding Cabinet +0 +48 +1 +RF_WiFi +USR-C322 +https://www.usriot.com/download/WIFI/USR-C322-Hardware-Manual_V1.2.01.pdf +WiFi IEEE802.11 b/g/n +0 +44 +44 +Relay_SMD +Relay_2P2T_10x6mm_TE_IMxxG +Signal Relay, 10x6mm, 2 Form C, Gull Wings, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Data+Sheet%7F108-98001%7FZ.1%7Fpdf%7FEnglish%7FENG_DS_108-98001_Z.1.pdf +TE IM-Series Relay DPDT Form C +0 +8 +8 +Relay_SMD +Relay_DPDT_AXICOM_IMSeries_JLeg +http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Specification+Or+Standard%7F108-98001%7FW5%7Fpdf%7FEnglish%7FENG_SS_108-98001_W5.pdf +AXICOM IM-Series Relay J JLeg +0 +8 +8 +Relay_SMD +Relay_DPDT_FRT5_SMD +IM Signal Relay DPDT FRT5 narrow footprint, SMD version of package +Relay DPDT IM-relay FRT5 +0 +10 +10 +Relay_SMD +Relay_DPDT_Kemet_EE2_NU +Kemet signal relay, DPDT, double coil latching, https://content.kemet.com/datasheets/KEM_R7002_EC2_EE2.pdf +Kemet EC2 signal relay DPDT double coil latching surface mount SMD +0 +8 +8 +Relay_SMD +Relay_DPDT_Kemet_EE2_NUH +Kemet signal relay, DPDT, double coil latching, https://content.kemet.com/datasheets/KEM_R7002_EC2_EE2.pdf +Kemet EC2 signal relay DPDT double coil latching surface mount SMD +0 +8 +8 +Relay_SMD +Relay_DPDT_Kemet_EE2_NUH_DoubleCoil +Kemet signal relay, DPDT, double coil latching, https://content.kemet.com/datasheets/KEM_R7002_EC2_EE2.pdf +Kemet EC2 signal relay DPDT double dual coil latching surface mount SMD +0 +10 +10 +Relay_SMD +Relay_DPDT_Kemet_EE2_NUX_DoubleCoil +Kemet signal relay, DPDT, double coil latching, https://content.kemet.com/datasheets/KEM_R7002_EC2_EE2.pdf +Kemet EC2 signal relay DPDT double dual coil latching surface mount SMD +0 +10 +10 +Relay_SMD +Relay_DPDT_Kemet_EE2_NUX_NKX +Kemet signal relay, DPDT, double coil latching, https://content.kemet.com/datasheets/KEM_R7002_EC2_EE2.pdf +Kemet EC2 signal relay DPDT double coil latching surface mount SMD +0 +8 +8 +Relay_SMD +Relay_DPDT_Kemet_EE2_NU_DoubleCoil +Kemet signal relay, DPDT, double coil latching, https://content.kemet.com/datasheets/KEM_R7002_EC2_EE2.pdf +Kemet EC2 signal relay DPDT double dual coil latching surface mount SMD +0 +10 +10 +Relay_SMD +Relay_DPDT_Omron_G6H-2F +package for Omron G6H-2F relais, see http://cdn-reichelt.de/documents/datenblatt/C300/G6H%23OMR.pdf +Omron G6H-2F relais +0 +10 +10 +Relay_SMD +Relay_DPDT_Omron_G6K-2F +Omron G6K-2F relay package http://omronfs.omron.com/en_US/ecb/products/pdf/en-g6k.pdf +Omron G6K-2F relay +0 +8 +8 +Relay_SMD +Relay_DPDT_Omron_G6K-2F-Y +Omron G6K-2F-Y relay package http://omronfs.omron.com/en_US/ecb/products/pdf/en-g6k.pdf +Omron G6K-2F-Y relay +0 +8 +8 +Relay_SMD +Relay_DPDT_Omron_G6K-2G +Omron G6K-2G relay package http://omronfs.omron.com/en_US/ecb/products/pdf/en-g6k.pdf +Omron G6K-2G relay +0 +8 +8 +Relay_SMD +Relay_DPDT_Omron_G6K-2G-Y +Omron G6K-2G-Y relay package http://omronfs.omron.com/en_US/ecb/products/pdf/en-g6k.pdf +Omron G6K-2G-Y relay +0 +8 +8 +Relay_SMD +Relay_DPDT_Omron_G6S-2F +Relay Omron G6S-2F, see http://omronfs.omron.com/en_US/ecb/products/pdf/en-g6s.pdf +Relay Omron G6S-2F +0 +8 +8 +Relay_SMD +Relay_DPDT_Omron_G6S-2G +Relay Omron G6S-2G, see http://omronfs.omron.com/en_US/ecb/products/pdf/en-g6s.pdf +Relay Omron G6S-2G +0 +8 +8 +Relay_SMD +Relay_DPDT_Omron_G6SK-2F +Relay Omron G6SK-2F, see http://omronfs.omron.com/en_US/ecb/products/pdf/en-g6s.pdf +Relay Omron G6SK-2F +0 +10 +10 +Relay_SMD +Relay_DPDT_Omron_G6SK-2G +Relay Omron G6SK-2G, see http://omronfs.omron.com/en_US/ecb/products/pdf/en-g6s.pdf +Relay Omron G6SK-2G +0 +10 +10 +Relay_SMD +Relay_Fujitsu_FTR-B3S +https://www.fujitsu.com/downloads/MICRO/fcai/relays/ftr-b3.pdf +Fujitsh FTR B3S B3SA Relay J JLeg +0 +8 +8 +Relay_SMD +Relay_SPDT_AXICOM_HF3Series_50ohms_Pitch1.27mm +hiqsdr.com/images/3/3e/Axicom-HF3.pdf +AXICOM HF3-Series Relay Pitch 1.27mm 50ohms +0 +16 +16 +Relay_SMD +Relay_SPDT_AXICOM_HF3Series_75ohms_Pitch1.27mm +hiqsdr.com/images/3/3e/Axicom-HF3.pdf +AXICOM HF3-Series Relay Pitch 1.27mm 75ohm +0 +16 +16 +Relay_THT +Relay_1-Form-A_Schrack-RYII_RM5mm +Relay, 1-Form-A, Schrack-RYII, RM5mm, SPST-NO +Relay 1-Form-A Schrack-RYII RM5mm SPST-NO +0 +4 +4 +Relay_THT +Relay_1-Form-B_Schrack-RYII_RM5mm +Relay, 1-Form-B, Schrack-RYII, RM5mm, SPST-NC +Relay 1-Form-B Schrack-RYII RM5mm SPST-NC +0 +4 +4 +Relay_THT +Relay_1-Form-C_Schrack-RYII_RM3.2mm +Relay, 1-Form-C, Schrack-RYII, RM3.2mm, SPDT +Relay 1-Form-C Schrack-RYII RM3.2mm SPDT +0 +5 +5 +Relay_THT +Relay_1P1T_NO_10x24x18.8mm_Panasonic_ADW11xxxxW_THT +Panasonic Relay SPST 10mm 24mm, https://www.panasonic-electric-works.com/pew/es/downloads/ds_dw_hl_en.pdf +Panasonic Relay SPST +0 +4 +4 +Relay_THT +Relay_3PST_COTO_3650 +Low thermal EMF 3PST-NO reed relay, 150V 0.25A, similar to 3660 but with independent shield, https://cotorelay.com/wp-content/uploads/2014/09/3600_series_reed_relay_datasheet.pdf +reed relay low thermal emf +0 +9 +9 +Relay_THT +Relay_3PST_COTO_3660 +Low thermal EMF 3PST-NO reed relay, 150V 0.25A, similar to 3650 but with shared shield/contact, https://cotorelay.com/wp-content/uploads/2014/09/3600_series_reed_relay_datasheet.pdf +reed relay low thermal emf +0 +8 +8 +Relay_THT +Relay_DPDT_AXICOM_IMSeries_Pitch3.2mm +AXICOM IM-Series Relays, DPDR, Pitch 3.2mm, http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Specification+Or+Standard%7F108-98001%7FV%7Fpdf%7FEnglish%7FENG_SS_108-98001_V_IM_0614_v1.pdf%7F4-1462039-1 +AXICOM IM-Series Relay DPDR Pitch 3.2mm +0 +8 +8 +Relay_THT +Relay_DPDT_AXICOM_IMSeries_Pitch5.08mm +AXICOM IM-Series Relays, DPDR, Pitch 5.08 +AXICOM IM-Series Relay DPDR Pitch 5.08 +0 +8 +8 +Relay_THT +Relay_DPDT_FRT5 +IM Signal Relay DPDT FRT5 narrow footprint +Relay DPDT IM-relay FRT5 +0 +10 +10 +Relay_THT +Relay_DPDT_Finder_30.22 +Finder 32.21-x000 Relay, DPDT, https://gfinder.findernet.com/public/attachments/30/EN/S30EN.pdf +AXICOM IM-Series Relay SPDT +0 +8 +8 +Relay_THT +Relay_DPDT_Finder_40.52 +Relay DPDT Finder 40.52, Pitch 5mm/7.5mm, https://www.finder-relais.net/de/finder-relais-serie-40.pdf +Relay DPDT Finder 40.52 Pitch 5mm +0 +8 +8 +Relay_THT +Relay_DPDT_Fujitsu_FTR-F1C +https://www.fujitsu.com/downloads/MICRO/fcai/relays/ftr-f1.pdf +relay dpdt fujitsu tht +0 +8 +8 +Relay_THT +Relay_DPDT_Kemet_EC2 +Kemet signal relay, DPDT, non-latching, single coil latching, https://content.kemet.com/datasheets/KEM_R7002_EC2_EE2.pdf +Kemet EC2 signal relay DPDT non single coil latching through hole THT +0 +8 +8 +Relay_THT +Relay_DPDT_Kemet_EC2_DoubleCoil +Kemet signal relay, DPDT, double coil latching, https://content.kemet.com/datasheets/KEM_R7002_EC2_EE2.pdf +Kemet EC2 signal relay DPDT double dual coil latching through hole THT +0 +10 +10 +Relay_THT +Relay_DPDT_Omron_G2RL-2 +Omron Relay, DPDT, https://omronfs.omron.com/en_US/ecb/products/pdf/en-g2rl.pdf +Omron Relay DPDT +0 +8 +8 +Relay_THT +Relay_DPDT_Omron_G5V-2 +http://omronfs.omron.com/en_US/ecb/products/pdf/en-g5v2.pdf +Omron G5V-2 Relay DPDT +0 +8 +8 +Relay_THT +Relay_DPDT_Omron_G6H-2 +Omron relay G6H-2, see http://cdn-reichelt.de/documents/datenblatt/C300/G6H%23OMR.pdf +Omron relay G6H-2 +0 +10 +10 +Relay_THT +Relay_DPDT_Omron_G6K-2P +Omron G6K-2P relay package http://omronfs.omron.com/en_US/ecb/products/pdf/en-g6k.pdf +Omron G6K-2P relay +0 +8 +8 +Relay_THT +Relay_DPDT_Omron_G6K-2P-Y +Omron G6K-2P-Y relay package http://omronfs.omron.com/en_US/ecb/products/pdf/en-g6k.pdf +Omron G6K-2P-Y relay +0 +8 +8 +Relay_THT +Relay_DPDT_Omron_G6S-2 +Relay Omron G6S-2, see http://omronfs.omron.com/en_US/ecb/products/pdf/en-g6s.pdf +Relay Omron G6S-2 +0 +8 +8 +Relay_THT +Relay_DPDT_Omron_G6SK-2 +Relay Omron G6SK-2, see http://omronfs.omron.com/en_US/ecb/products/pdf/en-g6s.pdf +Relay Omron G6SK-2 +0 +10 +10 +Relay_THT +Relay_DPDT_Panasonic_JW2 +Panasonic Relay DPDT, http://www3.panasonic.biz/ac/e_download/control/relay/power/catalog/mech_eng_jw.pdf?via=ok +Panasonic Relay DPDT +0 +8 +8 +Relay_THT +Relay_DPDT_Schrack-RT2-FormC-Dual-Coil_RM5mm +Relay DPDT Schrack-RT2 RM5mm 16A 250V AC Form C http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Data+Sheet%7FRT2_bistable%7F1116%7Fpdf%7FEnglish%7FENG_DS_RT2_bistable_1116.pdf%7F1-1415537-8 +Relay DPDT Schrack-RT2 RM5mm 16A 250V AC Relay +0 +9 +9 +Relay_THT +Relay_DPDT_Schrack-RT2-FormC_RM5mm +Relay DPDT Schrack-RT2 RM5mm 16A 250V AC Form C http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=RT2_reflow&DocType=DS&DocLang=EN +Relay DPDT Schrack-RT2 RM5mm 16A 250V AC Relay +0 +8 +8 +Relay_THT +Relay_DPST_COTO_3602 +Low thermal EMF DPST-NO reed relay, 150V 0.25A, https://cotorelay.com/wp-content/uploads/2014/09/3600_series_reed_relay_datasheet.pdf +reed relay low thermal emf +0 +7 +7 +Relay_THT +Relay_DPST_Fujitsu_FTR-F1A +https://www.fujitsu.com/downloads/MICRO/fcai/relays/ftr-f1.pdf +relay dpst fujitsu tht +0 +6 +6 +Relay_THT +Relay_DPST_Omron_G2RL-2A +Omron Relay, DPST, https://omronfs.omron.com/en_US/ecb/products/pdf/en-g2rl.pdf +Omron Relay DPST +0 +6 +6 +Relay_THT +Relay_DPST_Schrack-RT2-FormA_RM5mm +Relay DPST Schrack-RT2 RM5mm 16A 250V AC Form A http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=RT2_reflow&DocType=DS&DocLang=EN +Relay DPST Schrack-RT2 RM5mm 16A 250V AC Relay +0 +6 +6 +Relay_THT +Relay_SPDT_Finder_32.21-x000 +Finder 32.21-x000 Relay, SPDT, https://gfinder.findernet.com/assets/Series/355/S32EN.pdf +AXICOM IM-Series Relay SPDT +0 +5 +5 +Relay_THT +Relay_SPDT_Finder_34.51_Horizontal +Relay SPDT, Finder Type34.51, horizontal form, see https://gfinder.findernet.com/public/attachments/34/EN/S34USAEN.pdf +Relay SPDT Finder +0 +5 +5 +Relay_THT +Relay_SPDT_Finder_34.51_Vertical +Relay SPDT, Finder Type34.51, vertical/standing form, see https://gfinder.findernet.com/public/attachments/34/EN/S34USAEN.pdf +Relay SPDT Finder +0 +5 +5 +Relay_THT +Relay_SPDT_Finder_36.11 +FINDER 36.11, SPDT relay, 10A, https://gfinder.findernet.com/public/attachments/36/EN/S36EN.pdf +spdt relay +0 +5 +5 +Relay_THT +Relay_SPDT_Finder_40.11 +Relay SPDT Finder 40.11, https://www.finder-relais.net/de/finder-relais-serie-40.pdf +Relay SPDT Finder 40.11 +0 +5 +5 +Relay_THT +Relay_SPDT_Finder_40.31 +Relay DPDT Finder 40.31, Pitch 3.5mm/7.5mm, https://www.finder-relais.net/de/finder-relais-serie-40.pdf +Relay DPDT Finder 40.31 Pitch 3.5mm +0 +5 +5 +Relay_THT +Relay_SPDT_Finder_40.41 +Relay DPDT Finder 40.41, Pitch 3.5mm/7.5mm, https://www.finder-relais.net/de/finder-relais-serie-40.pdf +Relay DPDT Finder 40.41 Pitch 3.5mm +0 +5 +5 +Relay_THT +Relay_SPDT_Finder_40.51 +Relay DPDT Finder 40.51, Pitch 5mm/7.5mm, https://www.finder-relais.net/de/finder-relais-serie-40.pdf +Relay DPDT Finder 40.51 Pitch 5mm +0 +5 +5 +Relay_THT +Relay_SPDT_Fujitsu_FTR-LYCA005x_FormC_Vertical +Relay, SPDT Form C, vertical mount, 6A, 5-60V, https://www.fujitsu.com/sg/imagesgig5/ftr-ly.pdf +relay SPDT form c vertical +0 +5 +5 +Relay_THT +Relay_SPDT_HJR-4102 +IM Signal Relay SPDT HJR-4102 +Relay SPDT IM-relay HJR-4102 +0 +6 +6 +Relay_THT +Relay_SPDT_HsinDa_Y14 +http://www.hsinda.com.tw/upload/file/Y14-20200430135145.pdf +Relay Y14 +0 +6 +6 +Relay_THT +Relay_SPDT_Omron-G5LE-1 +Omron Relay SPDT, http://www.omron.com/ecb/products/pdf/en-g5le.pdf +Omron Relay SPDT +0 +5 +5 +Relay_THT +Relay_SPDT_Omron-G5Q-1 +Relay SPDT Omron Serie G5Q, http://omronfs.omron.com/en_US/ecb/products/pdf/en-g5q.pdf +Relay SPDT Omron Serie G5Q +0 +5 +5 +Relay_THT +Relay_SPDT_Omron_G2RL-1 +Omron Relay, SPDT, https://omronfs.omron.com/en_US/ecb/products/pdf/en-g2rl.pdf +Omron Relay SPDT +0 +5 +5 +Relay_THT +Relay_SPDT_Omron_G2RL-1-E +Omron Relay, SPDT, High Capacity, https://omronfs.omron.com/en_US/ecb/products/pdf/en-g2rl.pdf +Omron Relay SPDT High Capacity +0 +8 +5 +Relay_THT +Relay_SPDT_Omron_G5V-1 +Relay Omron G5V-1, see http://omronfs.omron.com/en_US/ecb/products/pdf/en-g5v_1.pdf +Relay Omron G5V-1 +0 +6 +6 +Relay_THT +Relay_SPDT_Omron_G6E +Relay SPDT Omron Serie G6E +Relay SPDT Omron Serie G6E 1x um +0 +5 +5 +Relay_THT +Relay_SPDT_Omron_G6EK +Relay SPDT Omron Serie G6EK, see http://www.logosfoundation.org/instrum_gwr/pi/Omron_G6E_134P.pdf +Relay SPDT Omron Serie G6EK +0 +6 +6 +Relay_THT +Relay_SPDT_Panasonic_JW1_FormC +Panasonic Relay SPDT, http://www3.panasonic.biz/ac/e_download/control/relay/power/catalog/mech_eng_jw.pdf?via=ok +Panasonic Relay SPDT +0 +5 +5 +Relay_THT +Relay_SPDT_PotterBrumfield_T9AP5D52_12V30A +Relay SPDT Potter&Brumfield T9AP5D52 12V 30A 1xUn Connector Fast ON Only Dummy for Space NO Pads +Relay SPDT Potter&Brumfield T9AP5D52 12V 30A 1xUm Connector Fast ON Flachsteckeranschluss Only Dummy for Space NO Pads +0 +0 +0 +Relay_THT +Relay_SPDT_RAYEX-L90 +https://a3.sofastcdn.com/attachment/7jioKBjnRiiSrjrjknRiwS77gwbf3zmp/L90-SERIES.pdf +Relay RAYEX L90 SPDT +0 +6 +6 +Relay_THT +Relay_SPDT_RAYEX-L90S +https://a3.sofastcdn.com/attachment/7jioKBjnRiiSrjrjknRiwS77gwbf3zmp/L90-SERIES.pdf +Relay RAYEX L90S SPDT +0 +5 +5 +Relay_THT +Relay_SPDT_SANYOU_SRD_Series_Form_C +relay Sanyou SRD series Form C http://www.sanyourelay.ca/public/products/pdf/SRD.pdf +relay Sanyu SRD form C +0 +5 +5 +Relay_THT +Relay_SPDT_Schrack-RP-II-1-16A-FormC_RM5mm +Relay SPST Schrack-RP-II/1 RM5mm 16A 250V AC Form C http://image.schrack.com/datenblaetter/h_rp810012-b.pdf +Relay SPST Schrack-RP-II/1 RM5mm 16A 250V AC Relay +0 +8 +5 +Relay_THT +Relay_SPDT_Schrack-RP-II-1-FormC_RM3.5mm +Relay SPST Schrack-RP-II/1 RM3.5mm 8A 250V AC Form C http://image.schrack.com/datenblaetter/h_rp810012-b.pdf +Relay SPST Schrack-RP-II/1 RM3.5mm 8A 250V AC Relay +0 +5 +5 +Relay_THT +Relay_SPDT_Schrack-RP-II-1-FormC_RM5mm +Relay SPST Schrack-RP-II/1 RM5mm 8A 250V AC Form C http://image.schrack.com/datenblaetter/h_rp810012-b.pdf +Relay SPST Schrack-RP-II/1 RM5mm 8A 250V AC Relay +0 +5 +5 +Relay_THT +Relay_SPDT_Schrack-RT1-16A-FormC_RM5mm +Relay SPST Schrack-RT1 RM5mm 16A 250V AC Form C http://image.schrack.com/datenblaetter/h_rt114012--_de.pdf +Relay SPST Schrack-RT1 RM5mm 16A 250V AC Relay +0 +8 +5 +Relay_THT +Relay_SPDT_Schrack-RT1-FormC_RM3.5mm +Relay SPST Schrack-RT1 RM3.5mm 8A 250V AC Form C http://image.schrack.com/datenblaetter/h_rt114012--_de.pdf +Relay SPST Schrack-RT1 RM3.5mm 8A 250V AC Relay +0 +5 +5 +Relay_THT +Relay_SPDT_Schrack-RT1-FormC_RM5mm +Relay SPST Schrack-RT1 RM5mm 8A 250V AC Form C http://image.schrack.com/datenblaetter/h_rt114012--_de.pdf +Relay SPST Schrack-RT1 RM5mm 8A 250V AC Relay +0 +5 +5 +Relay_THT +Relay_SPDT_StandexMeder_SIL_Form1C +Standex-Meder SIL-relais, Form 1C, see https://standexelectronics.com/wp-content/uploads/datasheet_reed_relay_SIL.pdf +Standex Meder SIL reed relais +0 +5 +5 +Relay_THT +Relay_SPST-NO_Fujitsu_FTR-LYAA005x_FormA_Vertical +Relay, SPST-NO Form A, vertical mount, 6A, 5-60V, https://www.fujitsu.com/sg/imagesgig5/ftr-ly.pdf +relay SPST-NO form A vertical +0 +4 +4 +Relay_THT +Relay_SPST_Finder_32.21-x300 +Finder 32.21-x300 Relay, SPST, https://gfinder.findernet.com/assets/Series/355/S32EN.pdf +Finder 32.21-x300 Relay SPST +0 +4 +4 +Relay_THT +Relay_SPST_Omron-G5Q-1A +Relay SPST-NO Omron Serie G5Q, http://omronfs.omron.com/en_US/ecb/products/pdf/en-g5q.pdf +Relay SPST-NO Omron Serie G5Q +0 +4 +4 +Relay_THT +Relay_SPST_Omron_G2RL-1A +Omron Relay, SPST, https://omronfs.omron.com/en_US/ecb/products/pdf/en-g2rl.pdf +Omron Relay SPST +0 +4 +4 +Relay_THT +Relay_SPST_Omron_G2RL-1A-E +Omron Relay, SPST, High Capacity, https://omronfs.omron.com/en_US/ecb/products/pdf/en-g2rl.pdf +Omron Relay SPST High Capacity +0 +6 +4 +Relay_THT +Relay_SPST_Panasonic_ALFG_FormA +Panasonic Relay SPST, https://www3.panasonic.biz/ac/e_download/control/relay/power/catalog/mech_eng_lfg.pdf +Panasonic Relay SPST +0 +4 +4 +Relay_THT +Relay_SPST_Panasonic_ALFG_FormA_CircularHoles +Panasonic Relay SPST, https://www3.panasonic.biz/ac/e_download/control/relay/power/catalog/mech_eng_lfg.pdf +Panasonic Relay SPST +0 +4 +4 +Relay_THT +Relay_SPST_Panasonic_JW1_FormA +Panasonic Relay SPST, http://www3.panasonic.biz/ac/e_download/control/relay/power/catalog/mech_eng_jw.pdf?via=ok +Panasonic Relay SPST +0 +4 +4 +Relay_THT +Relay_SPST_PotterBrumfield_T9AP1D52_12V30A +Relay SPST Potter&Brumfield T9AP1D52 12V 30A 1xEin Connector Fast ON Only Dummy for Space NO Pads +Relau SPST Potter&Brumfield T9AP1D52 12V 30A 1xEin Connector Fast ON Flachsteckeranschluss Only Dummy for Space NO Pads +0 +0 +0 +Relay_THT +Relay_SPST_RAYEX-L90A +https://a3.sofastcdn.com/attachment/7jioKBjnRiiSrjrjknRiwS77gwbf3zmp/L90-SERIES.pdf +Relay RAYEX L90A SPST NO +0 +5 +5 +Relay_THT +Relay_SPST_RAYEX-L90AS +https://a3.sofastcdn.com/attachment/7jioKBjnRiiSrjrjknRiwS77gwbf3zmp/L90-SERIES.pdf +Relay RAYEX L90AS SPST NO +0 +4 +4 +Relay_THT +Relay_SPST_RAYEX-L90B +https://a3.sofastcdn.com/attachment/7jioKBjnRiiSrjrjknRiwS77gwbf3zmp/L90-SERIES.pdf +Relay RAYEX L90B SPST NC +0 +5 +5 +Relay_THT +Relay_SPST_RAYEX-L90BS +https://a3.sofastcdn.com/attachment/7jioKBjnRiiSrjrjknRiwS77gwbf3zmp/L90-SERIES.pdf +Relay RAYEX L90BS SPST NC +0 +4 +4 +Relay_THT +Relay_SPST_SANYOU_SRD_Series_Form_A +relay Sanyou SRD series Form A http://www.sanyourelay.ca/public/products/pdf/SRD.pdf +relay Sanyu SRD form A +0 +4 +4 +Relay_THT +Relay_SPST_SANYOU_SRD_Series_Form_B +relay Sanyou SRD series Form B opener http://www.sanyourelay.ca/public/products/pdf/SRD.pdf +relay Sanyu SRD form B opener +0 +4 +4 +Relay_THT +Relay_SPST_Schrack-RP-II-1-16A-FormA_RM5mm +Relay SPST Schrack-RP-II/1 RM5mm 16A 250V AC Form A http://image.schrack.com/datenblaetter/h_rp810012-b.pdf +Relay SPST Schrack-RP-II/1 RM5mm 16A 250V AC Relay +0 +6 +4 +Relay_THT +Relay_SPST_Schrack-RP-II-1-FormA_RM3.5mm +Relay SPST Schrack-RP-II/1 RM3.5mm 8A 250V AC Form A +Relay SPST Schrack-RP-II/1 RM3.5mm 8A 250V AC Relay +0 +4 +4 +Relay_THT +Relay_SPST_Schrack-RP-II-1-FormA_RM5mm +Relay SPST Schrack-RP-II/1 RM5mm 8A 250V AC Form A http://image.schrack.com/datenblaetter/h_rp810012-b.pdf +Relay SPST Schrack-RP-II/1 RM5mm 8A 250V AC Relay +0 +4 +4 +Relay_THT +Relay_SPST_Schrack-RP3SL-1coil_RM5mm +Relay SPST Schrack-RP3SL, 1-coil-version, RM5mm 16A 250V AC Form A http://www.alliedelec.com/m/d/543c6bed18bf23a83ae5238947033ee0.pdf +Relay SPST Schrack-RP3SL RM5mm 16A 250V AC Relay +0 +6 +4 +Relay_THT +Relay_SPST_Schrack-RP3SL_RM5mm +Relay SPST Schrack-RP3SL RM5mm 16A 250V AC Form A http://www.alliedelec.com/m/d/543c6bed18bf23a83ae5238947033ee0.pdf +Relay SPST Schrack-RP3SL RM5mm 16A 250V AC Relay +0 +7 +5 +Relay_THT +Relay_SPST_Schrack-RT1-16A-FormA_RM5mm +Relay SPST Schrack-RT2 RM5mm 16A 250V AC Form C http://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=RT2_reflow&DocType=DS&DocLang=EN +Relay SPST Schrack-RT2 RM5mm 16A 250V AC Relay +0 +6 +4 +Relay_THT +Relay_SPST_Schrack-RT1-FormA_RM3.5mm +Relay SPST Schrack-RT1 RM3.5mm 8A 250V AC Form A +Relay SPST Schrack-RT1 RM3.5mm 8A 250V AC Relay +0 +4 +4 +Relay_THT +Relay_SPST_Schrack-RT1-FormA_RM5mm +Relay SPST Schrack-RT1 RM5mm 8A 250V AC Form C http://image.schrack.com/datenblaetter/h_rt114012--_de.pdf +Relay SPST Schrack-RT1 RM5mm 8A 250V AC Relay +0 +4 +4 +Relay_THT +Relay_SPST_StandexMeder_MS_Form1AB +Standex-Meder MS SIL-relais, Form 1A/1B, see https://standexelectronics.com/de/produkte/ms-reed-relais/ +Standex Meder MS SIL reed relais +0 +4 +4 +Relay_THT +Relay_SPST_StandexMeder_SIL_Form1A +Standex-Meder SIL-relais, Form 1A, see https://standexelectronics.com/wp-content/uploads/datasheet_reed_relay_SIL.pdf +Standex Meder SIL reed relais +0 +4 +4 +Relay_THT +Relay_SPST_StandexMeder_SIL_Form1B +Standex-Meder SIL-relais, Form 1B, see https://standexelectronics.com/wp-content/uploads/datasheet_reed_relay_SIL.pdf +Standex Meder SIL reed relais +0 +4 +4 +Relay_THT +Relay_SPST_TE_PCH-1xxx2M +Miniature PCB Relay, PCH Series, 1 Form A (NO), SPST http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Data+Sheet%7FPCH_series_relay_data_sheet_E%7F1215%7Fpdf%7FEnglish%7FENG_DS_PCH_series_relay_data_sheet_E_1215.pdf +Relay SPST NO +0 +4 +4 +Relay_THT +Relay_SPST_TE_PCN-1xxD3MHZ +https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F1461491%7FG2%7Fpdf%7FEnglish%7FENG_CD_1461491_G2.pdf%7F3-1461491-0 +SPST relay slim +0 +4 +4 +Relay_THT +Relay_Socket_3PDT_Omron_PLE11-0 +29mm Dia, round mounting socket, 10A, 2kV AC / minute, 1e3Mohm, https://www.omron.com.tw/data_pdf/cat/common_sockets_ds_e_6_1_csm1819.pdf?#page=27 +tube type relay +0 +11 +11 +Relay_THT +Relay_Socket_4PDT_Omron_PY14-02 +21.4x25.8mm, 4Pole mounting socket, 3A, 1.5kV AC / minute, 1e2Mohm, https://www.omron.com.tw/data_pdf/cat/common_sockets_ds_e_6_1_csm1819.pdf?#page=19 +relay socket +0 +14 +14 +Relay_THT +Relay_Socket_DPDT_Finder_96.12 +DPDT relay socket, 15A max 10A per contact, 2kV AC Isolation, https://gfinder.findernet.com/public/attachments/56/DE/S56DE.pdf +finder relay socket 96.12 56.32 +0 +8 +8 +Relay_THT +Relay_Socket_DPDT_Omron_PLE08-0 +29mm Dia, round mounting socket, 10A, 2kV AC / minute, 1e3Mohm, https://www.omron.com.tw/data_pdf/cat/common_sockets_ds_e_6_1_csm1819.pdf?#page=27 +tube type relay +0 +8 +8 +Relay_THT +Relay_StandexMeder_DIP_HighProfile +package for Standex Meder DIP reed relay series, see https://standexelectronics.com/wp-content/uploads/datasheet_reed_relay_DIP.pdf +DIL DIP PDIP 2.54mm 7.62mm 300mil reed relay +0 +8 +8 +Relay_THT +Relay_StandexMeder_DIP_LowProfile +package for Standex Meder DIP reed relay series, see https://standexelectronics.com/wp-content/uploads/datasheet_reed_relay_DIP.pdf +DIL DIP PDIP 2.54mm 7.62mm 300mil reed relay +0 +8 +8 +Relay_THT +Relay_StandexMeder_UMS +Standex-Meder SIL-relais, UMS, see http://cdn-reichelt.de/documents/datenblatt/C300/UMS05_1A80_75L_DB.pdf +Standex Meder SIL reed relais +0 +4 +4 +Resistor_SMD +R_0201_0603Metric +Resistor SMD 0201 (0603 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://www.vishay.com/docs/20052/crcw0201e3.pdf), generated with kicad-footprint-generator +resistor +0 +4 +2 +Resistor_SMD +R_0201_0603Metric_Pad0.64x0.40mm_HandSolder +Resistor SMD 0201 (0603 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://www.vishay.com/docs/20052/crcw0201e3.pdf), generated with kicad-footprint-generator +resistor handsolder +0 +4 +2 +Resistor_SMD +R_0402_1005Metric +Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator +resistor +0 +2 +2 +Resistor_SMD +R_0402_1005Metric_Pad0.72x0.64mm_HandSolder +Resistor SMD 0402 (1005 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator +resistor handsolder +0 +2 +2 +Resistor_SMD +R_0603_1608Metric +Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator +resistor +0 +2 +2 +Resistor_SMD +R_0603_1608Metric_Pad0.98x0.95mm_HandSolder +Resistor SMD 0603 (1608 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator +resistor handsolder +0 +2 +2 +Resistor_SMD +R_0612_1632Metric +Resistor SMD 0612 (1632 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://www.vishay.com/docs/20019/rcwe.pdf), generated with kicad-footprint-generator +resistor +0 +2 +2 +Resistor_SMD +R_0612_1632Metric_Pad1.18x3.40mm_HandSolder +Resistor SMD 0612 (1632 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://www.vishay.com/docs/20019/rcwe.pdf), generated with kicad-footprint-generator +resistor handsolder +0 +2 +2 +Resistor_SMD +R_0805_2012Metric +Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator +resistor +0 +2 +2 +Resistor_SMD +R_0805_2012Metric_Pad1.20x1.40mm_HandSolder +Resistor SMD 0805 (2012 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator +resistor handsolder +0 +2 +2 +Resistor_SMD +R_0815_2038Metric +Resistor SMD 0815 (2038 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://www.susumu.co.jp/common/pdf/n_catalog_partition07_en.pdf), generated with kicad-footprint-generator +resistor +0 +2 +2 +Resistor_SMD +R_0815_2038Metric_Pad1.20x4.05mm_HandSolder +Resistor SMD 0815 (2038 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://www.susumu.co.jp/common/pdf/n_catalog_partition07_en.pdf), generated with kicad-footprint-generator +resistor handsolder +0 +2 +2 +Resistor_SMD +R_01005_0402Metric +Resistor SMD 01005 (0402 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://www.vishay.com/docs/20056/crcw01005e3.pdf), generated with kicad-footprint-generator +resistor +0 +4 +2 +Resistor_SMD +R_01005_0402Metric_Pad0.57x0.30mm_HandSolder +Resistor SMD 01005 (0402 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: http://www.vishay.com/docs/20056/crcw01005e3.pdf), generated with kicad-footprint-generator +resistor handsolder +0 +4 +2 +Resistor_SMD +R_1020_2550Metric +Resistor SMD 1020 (2550 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://www.vishay.com/docs/20019/rcwe.pdf), generated with kicad-footprint-generator +resistor +0 +2 +2 +Resistor_SMD +R_1020_2550Metric_Pad1.33x5.20mm_HandSolder +Resistor SMD 1020 (2550 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://www.vishay.com/docs/20019/rcwe.pdf), generated with kicad-footprint-generator +resistor handsolder +0 +2 +2 +Resistor_SMD +R_1206_3216Metric +Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator +resistor +0 +2 +2 +Resistor_SMD +R_1206_3216Metric_Pad1.30x1.75mm_HandSolder +Resistor SMD 1206 (3216 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator +resistor handsolder +0 +2 +2 +Resistor_SMD +R_1210_3225Metric +Resistor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator +resistor +0 +2 +2 +Resistor_SMD +R_1210_3225Metric_Pad1.30x2.65mm_HandSolder +Resistor SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator +resistor handsolder +0 +2 +2 +Resistor_SMD +R_1218_3246Metric +Resistor SMD 1218 (3246 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://www.vishay.com/docs/20035/dcrcwe3.pdf), generated with kicad-footprint-generator +resistor +0 +2 +2 +Resistor_SMD +R_1218_3246Metric_Pad1.22x4.75mm_HandSolder +Resistor SMD 1218 (3246 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://www.vishay.com/docs/20035/dcrcwe3.pdf), generated with kicad-footprint-generator +resistor handsolder +0 +2 +2 +Resistor_SMD +R_1812_4532Metric +Resistor SMD 1812 (4532 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://www.nikhef.nl/pub/departments/mt/projects/detectorR_D/dtddice/ERJ2G.pdf), generated with kicad-footprint-generator +resistor +0 +2 +2 +Resistor_SMD +R_1812_4532Metric_Pad1.30x3.40mm_HandSolder +Resistor SMD 1812 (4532 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://www.nikhef.nl/pub/departments/mt/projects/detectorR_D/dtddice/ERJ2G.pdf), generated with kicad-footprint-generator +resistor handsolder +0 +2 +2 +Resistor_SMD +R_2010_5025Metric +Resistor SMD 2010 (5025 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator +resistor +0 +2 +2 +Resistor_SMD +R_2010_5025Metric_Pad1.40x2.65mm_HandSolder +Resistor SMD 2010 (5025 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator +resistor handsolder +0 +2 +2 +Resistor_SMD +R_2512_6332Metric +Resistor SMD 2512 (6332 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator +resistor +0 +2 +2 +Resistor_SMD +R_2512_6332Metric_Pad1.40x3.35mm_HandSolder +Resistor SMD 2512 (6332 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: IPC-SM-782 page 72, https://www.pcb-3d.com/wordpress/wp-content/uploads/ipc-sm-782a_amendment_1_and_2.pdf), generated with kicad-footprint-generator +resistor handsolder +0 +2 +2 +Resistor_SMD +R_2816_7142Metric +Resistor SMD 2816 (7142 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size from: https://www.vishay.com/docs/30100/wsl.pdf), generated with kicad-footprint-generator +resistor +0 +2 +2 +Resistor_SMD +R_2816_7142Metric_Pad3.20x4.45mm_HandSolder +Resistor SMD 2816 (7142 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size from: https://www.vishay.com/docs/30100/wsl.pdf), generated with kicad-footprint-generator +resistor handsolder +0 +2 +2 +Resistor_SMD +R_4020_10251Metric +Resistor SMD 4020 (10251 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: http://datasheet.octopart.com/HVC0603T5004FET-Ohmite-datasheet-26699797.pdf), generated with kicad-footprint-generator +resistor +0 +2 +2 +Resistor_SMD +R_4020_10251Metric_Pad1.65x5.30mm_HandSolder +Resistor SMD 4020 (10251 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: http://datasheet.octopart.com/HVC0603T5004FET-Ohmite-datasheet-26699797.pdf), generated with kicad-footprint-generator +resistor handsolder +0 +2 +2 +Resistor_SMD +R_Array_Concave_2x0603 +Thick Film Chip Resistor Array, Wave soldering, Vishay CRA06P (see cra06p.pdf) +resistor array +0 +4 +4 +Resistor_SMD +R_Array_Concave_4x0402 +Thick Film Chip Resistor Array, Wave soldering, Vishay CRA04P (see cra04p.pdf) +resistor array +0 +8 +8 +Resistor_SMD +R_Array_Concave_4x0603 +Thick Film Chip Resistor Array, Wave soldering, Vishay CRA06P (see cra06p.pdf) +resistor array +0 +8 +8 +Resistor_SMD +R_Array_Convex_2x0402 +Chip Resistor Network, ROHM MNR02 (see mnr_g.pdf) +resistor array +0 +4 +4 +Resistor_SMD +R_Array_Convex_2x0603 +Chip Resistor Network, ROHM MNR12 (see mnr_g.pdf) +resistor array +0 +4 +4 +Resistor_SMD +R_Array_Convex_2x0606 +Precision Thin Film Chip Resistor Array, VISHAY (see http://www.vishay.com/docs/28770/acasat.pdf) +resistor array +0 +4 +4 +Resistor_SMD +R_Array_Convex_2x1206 +Chip Resistor Network, ROHM MNR32 (see mnr_g.pdf) +resistor array +0 +4 +4 +Resistor_SMD +R_Array_Convex_4x0402 +Chip Resistor Network, ROHM MNR04 (see mnr_g.pdf) +resistor array +0 +8 +8 +Resistor_SMD +R_Array_Convex_4x0603 +Chip Resistor Network, ROHM MNR14 (see mnr_g.pdf) +resistor array +0 +8 +8 +Resistor_SMD +R_Array_Convex_4x0612 +Precision Thin Film Chip Resistor Array, VISHAY (see http://www.vishay.com/docs/28770/acasat.pdf) +resistor array +0 +8 +8 +Resistor_SMD +R_Array_Convex_4x1206 +Chip Resistor Network, ROHM MNR34 (see mnr_g.pdf) +resistor array +0 +8 +8 +Resistor_SMD +R_Array_Convex_5x0603 +Chip Resistor Network, ROHM MNR15 (see mnr_g.pdf) +resistor array +0 +10 +10 +Resistor_SMD +R_Array_Convex_5x1206 +Chip Resistor Network, ROHM MNR35 (see mnr_g.pdf) +resistor array +0 +10 +10 +Resistor_SMD +R_Array_Convex_8x0602 +Chip Resistor Network, ROHM MNR18 (see mnr_g.pdf) +resistor array +0 +16 +16 +Resistor_SMD +R_Cat16-2 +SMT resistor net, Bourns CAT16 series, 2 way +SMT resistor net Bourns CAT16 series 2 way +0 +4 +4 +Resistor_SMD +R_Cat16-4 +SMT resistor net, Bourns CAT16 series, 4 way +SMT resistor net Bourns CAT16 series 4 way +0 +8 +8 +Resistor_SMD +R_Cat16-8 +SMT resistor net, Bourns CAT16 series, 8 way +SMT resistor net Bourns CAT16 series 8 way +0 +16 +16 +Resistor_SMD +R_MELF_MMB-0207 +Resistor, MELF, MMB-0207, http://www.vishay.com/docs/28713/melfprof.pdf +MELF Resistor +0 +2 +2 +Resistor_SMD +R_MicroMELF_MMU-0102 +Resistor, MicroMELF, MMU-0102, http://www.vishay.com/docs/28713/melfprof.pdf +MicroMELF Resistor +0 +2 +2 +Resistor_SMD +R_MiniMELF_MMA-0204 +Resistor, MiniMELF, MMA-0204, http://www.vishay.com/docs/28713/melfprof.pdf +MiniMELF Resistor +0 +2 +2 +Resistor_SMD +R_Shunt_Ohmite_LVK12 +4 contact shunt resistor +shunt resistor 4 contacts +0 +4 +4 +Resistor_SMD +R_Shunt_Ohmite_LVK20 +4 contacts shunt resistor, https://www.ohmite.com/assets/docs/res_lvk.pdf +4 contacts resistor smd +0 +4 +4 +Resistor_SMD +R_Shunt_Ohmite_LVK24 +4 contacts shunt resistor,https://www.ohmite.com/assets/docs/res_lvk.pdf +4 contacts resistor smd +0 +4 +4 +Resistor_SMD +R_Shunt_Ohmite_LVK25 +4 contacts shunt resistor,https://www.ohmite.com/assets/docs/res_lvk.pdf +4 contacts resistor smd +0 +4 +4 +Resistor_SMD +R_Shunt_Vishay_WSK2512_6332Metric_T1.19mm +Shunt Resistor SMD 2512 (6332 Metric), 2.6mm thick, Vishay WKS2512, Terminal length (T) 1.19mm, 5 to 200 milli Ohm (http://http://www.vishay.com/docs/30108/wsk.pdf) +resistor shunt WSK2512 +0 +4 +4 +Resistor_SMD +R_Shunt_Vishay_WSK2512_6332Metric_T2.21mm +Shunt Resistor SMD 2512 (6332 Metric), 2.6mm thick, Vishay WKS2512, Terminal length (T) 2.21mm, 1 to 4.9 milli Ohm (http://http://www.vishay.com/docs/30108/wsk.pdf) +resistor shunt WSK2512 +0 +4 +4 +Resistor_SMD +R_Shunt_Vishay_WSK2512_6332Metric_T2.66mm +Shunt Resistor SMD 2512 (6332 Metric), 2.6mm thick, Vishay WKS2512, Terminal length (T) 2.66mm, 0.5 to 0.99 milli Ohm (http://http://www.vishay.com/docs/30108/wsk.pdf) +resistor shunt WSK2512 +0 +4 +4 +Resistor_SMD +R_Shunt_Vishay_WSKW0612 +https://www.vishay.com/docs/30332/wskw0612.pdf +4-Terminal SMD Shunt +0 +4 +4 +Resistor_SMD +R_Shunt_Vishay_WSR2_WSR3 +Power Metal Strip Resistors 0.005 to 0.2, https://www.vishay.com/docs/30101/wsr.pdf +SMD Shunt Resistor +0 +2 +2 +Resistor_SMD +R_Shunt_Vishay_WSR2_WSR3_KelvinConnection +Power Metal Strip Resistors 0.005 to 0.2, https://www.vishay.com/docs/30101/wsr.pdf +SMD Shunt Resistor +0 +4 +2 +Resistor_THT +R_Array_SIP4 +4-pin Resistor SIP pack +R +0 +4 +4 +Resistor_THT +R_Array_SIP5 +5-pin Resistor SIP pack +R +0 +5 +5 +Resistor_THT +R_Array_SIP6 +6-pin Resistor SIP pack +R +0 +6 +6 +Resistor_THT +R_Array_SIP7 +7-pin Resistor SIP pack +R +0 +7 +7 +Resistor_THT +R_Array_SIP8 +8-pin Resistor SIP pack +R +0 +8 +8 +Resistor_THT +R_Array_SIP9 +9-pin Resistor SIP pack +R +0 +9 +9 +Resistor_THT +R_Array_SIP10 +10-pin Resistor SIP pack +R +0 +10 +10 +Resistor_THT +R_Array_SIP11 +11-pin Resistor SIP pack +R +0 +11 +11 +Resistor_THT +R_Array_SIP12 +12-pin Resistor SIP pack +R +0 +12 +12 +Resistor_THT +R_Array_SIP13 +13-pin Resistor SIP pack +R +0 +13 +13 +Resistor_THT +R_Array_SIP14 +14-pin Resistor SIP pack +R +0 +14 +14 +Resistor_THT +R_Axial_DIN0204_L3.6mm_D1.6mm_P1.90mm_Vertical +Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=1.9mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf +Resistor Axial_DIN0204 series Axial Vertical pin pitch 1.9mm 0.167W length 3.6mm diameter 1.6mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical +Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=2.54mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf +Resistor Axial_DIN0204 series Axial Vertical pin pitch 2.54mm 0.167W length 3.6mm diameter 1.6mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal +Resistor, Axial_DIN0204 series, Axial, Horizontal, pin pitch=5.08mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf +Resistor Axial_DIN0204 series Axial Horizontal pin pitch 5.08mm 0.167W length 3.6mm diameter 1.6mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Vertical +Resistor, Axial_DIN0204 series, Axial, Vertical, pin pitch=5.08mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf +Resistor Axial_DIN0204 series Axial Vertical pin pitch 5.08mm 0.167W length 3.6mm diameter 1.6mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal +Resistor, Axial_DIN0204 series, Axial, Horizontal, pin pitch=7.62mm, 0.167W, length*diameter=3.6*1.6mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf +Resistor Axial_DIN0204 series Axial Horizontal pin pitch 7.62mm 0.167W length 3.6mm diameter 1.6mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical +Resistor, Axial_DIN0207 series, Axial, Vertical, pin pitch=2.54mm, 0.25W = 1/4W, length*diameter=6.3*2.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf +Resistor Axial_DIN0207 series Axial Vertical pin pitch 2.54mm 0.25W = 1/4W length 6.3mm diameter 2.5mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0207_L6.3mm_D2.5mm_P5.08mm_Vertical +Resistor, Axial_DIN0207 series, Axial, Vertical, pin pitch=5.08mm, 0.25W = 1/4W, length*diameter=6.3*2.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf +Resistor Axial_DIN0207 series Axial Vertical pin pitch 5.08mm 0.25W = 1/4W length 6.3mm diameter 2.5mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal +Resistor, Axial_DIN0207 series, Axial, Horizontal, pin pitch=7.62mm, 0.25W = 1/4W, length*diameter=6.3*2.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf +Resistor Axial_DIN0207 series Axial Horizontal pin pitch 7.62mm 0.25W = 1/4W length 6.3mm diameter 2.5mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal +Resistor, Axial_DIN0207 series, Axial, Horizontal, pin pitch=10.16mm, 0.25W = 1/4W, length*diameter=6.3*2.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf +Resistor Axial_DIN0207 series Axial Horizontal pin pitch 10.16mm 0.25W = 1/4W length 6.3mm diameter 2.5mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0207_L6.3mm_D2.5mm_P15.24mm_Horizontal +Resistor, Axial_DIN0207 series, Axial, Horizontal, pin pitch=15.24mm, 0.25W = 1/4W, length*diameter=6.3*2.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf +Resistor Axial_DIN0207 series Axial Horizontal pin pitch 15.24mm 0.25W = 1/4W length 6.3mm diameter 2.5mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0309_L9.0mm_D3.2mm_P2.54mm_Vertical +Resistor, Axial_DIN0309 series, Axial, Vertical, pin pitch=2.54mm, 0.5W = 1/2W, length*diameter=9*3.2mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf +Resistor Axial_DIN0309 series Axial Vertical pin pitch 2.54mm 0.5W = 1/2W length 9mm diameter 3.2mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0309_L9.0mm_D3.2mm_P5.08mm_Vertical +Resistor, Axial_DIN0309 series, Axial, Vertical, pin pitch=5.08mm, 0.5W = 1/2W, length*diameter=9*3.2mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf +Resistor Axial_DIN0309 series Axial Vertical pin pitch 5.08mm 0.5W = 1/2W length 9mm diameter 3.2mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0309_L9.0mm_D3.2mm_P12.70mm_Horizontal +Resistor, Axial_DIN0309 series, Axial, Horizontal, pin pitch=12.7mm, 0.5W = 1/2W, length*diameter=9*3.2mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf +Resistor Axial_DIN0309 series Axial Horizontal pin pitch 12.7mm 0.5W = 1/2W length 9mm diameter 3.2mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal +Resistor, Axial_DIN0309 series, Axial, Horizontal, pin pitch=15.24mm, 0.5W = 1/2W, length*diameter=9*3.2mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf +Resistor Axial_DIN0309 series Axial Horizontal pin pitch 15.24mm 0.5W = 1/2W length 9mm diameter 3.2mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0309_L9.0mm_D3.2mm_P20.32mm_Horizontal +Resistor, Axial_DIN0309 series, Axial, Horizontal, pin pitch=20.32mm, 0.5W = 1/2W, length*diameter=9*3.2mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf +Resistor Axial_DIN0309 series Axial Horizontal pin pitch 20.32mm 0.5W = 1/2W length 9mm diameter 3.2mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0309_L9.0mm_D3.2mm_P25.40mm_Horizontal +Resistor, Axial_DIN0309 series, Axial, Horizontal, pin pitch=25.4mm, 0.5W = 1/2W, length*diameter=9*3.2mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf +Resistor Axial_DIN0309 series Axial Horizontal pin pitch 25.4mm 0.5W = 1/2W length 9mm diameter 3.2mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0411_L9.9mm_D3.6mm_P5.08mm_Vertical +Resistor, Axial_DIN0411 series, Axial, Vertical, pin pitch=5.08mm, 1W, length*diameter=9.9*3.6mm^2 +Resistor Axial_DIN0411 series Axial Vertical pin pitch 5.08mm 1W length 9.9mm diameter 3.6mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0411_L9.9mm_D3.6mm_P7.62mm_Vertical +Resistor, Axial_DIN0411 series, Axial, Vertical, pin pitch=7.62mm, 1W, length*diameter=9.9*3.6mm^2 +Resistor Axial_DIN0411 series Axial Vertical pin pitch 7.62mm 1W length 9.9mm diameter 3.6mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0411_L9.9mm_D3.6mm_P12.70mm_Horizontal +Resistor, Axial_DIN0411 series, Axial, Horizontal, pin pitch=12.7mm, 1W, length*diameter=9.9*3.6mm^2 +Resistor Axial_DIN0411 series Axial Horizontal pin pitch 12.7mm 1W length 9.9mm diameter 3.6mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0411_L9.9mm_D3.6mm_P15.24mm_Horizontal +Resistor, Axial_DIN0411 series, Axial, Horizontal, pin pitch=15.24mm, 1W, length*diameter=9.9*3.6mm^2 +Resistor Axial_DIN0411 series Axial Horizontal pin pitch 15.24mm 1W length 9.9mm diameter 3.6mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0411_L9.9mm_D3.6mm_P20.32mm_Horizontal +Resistor, Axial_DIN0411 series, Axial, Horizontal, pin pitch=20.32mm, 1W, length*diameter=9.9*3.6mm^2 +Resistor Axial_DIN0411 series Axial Horizontal pin pitch 20.32mm 1W length 9.9mm diameter 3.6mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0411_L9.9mm_D3.6mm_P25.40mm_Horizontal +Resistor, Axial_DIN0411 series, Axial, Horizontal, pin pitch=25.4mm, 1W, length*diameter=9.9*3.6mm^2 +Resistor Axial_DIN0411 series Axial Horizontal pin pitch 25.4mm 1W length 9.9mm diameter 3.6mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0414_L11.9mm_D4.5mm_P5.08mm_Vertical +Resistor, Axial_DIN0414 series, Axial, Vertical, pin pitch=5.08mm, 2W, length*diameter=11.9*4.5mm^2, http://www.vishay.com/docs/20128/wkxwrx.pdf +Resistor Axial_DIN0414 series Axial Vertical pin pitch 5.08mm 2W length 11.9mm diameter 4.5mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0414_L11.9mm_D4.5mm_P7.62mm_Vertical +Resistor, Axial_DIN0414 series, Axial, Vertical, pin pitch=7.62mm, 2W, length*diameter=11.9*4.5mm^2, http://www.vishay.com/docs/20128/wkxwrx.pdf +Resistor Axial_DIN0414 series Axial Vertical pin pitch 7.62mm 2W length 11.9mm diameter 4.5mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0414_L11.9mm_D4.5mm_P15.24mm_Horizontal +Resistor, Axial_DIN0414 series, Axial, Horizontal, pin pitch=15.24mm, 2W, length*diameter=11.9*4.5mm^2, http://www.vishay.com/docs/20128/wkxwrx.pdf +Resistor Axial_DIN0414 series Axial Horizontal pin pitch 15.24mm 2W length 11.9mm diameter 4.5mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0414_L11.9mm_D4.5mm_P20.32mm_Horizontal +Resistor, Axial_DIN0414 series, Axial, Horizontal, pin pitch=20.32mm, 2W, length*diameter=11.9*4.5mm^2, http://www.vishay.com/docs/20128/wkxwrx.pdf +Resistor Axial_DIN0414 series Axial Horizontal pin pitch 20.32mm 2W length 11.9mm diameter 4.5mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0414_L11.9mm_D4.5mm_P25.40mm_Horizontal +Resistor, Axial_DIN0414 series, Axial, Horizontal, pin pitch=25.4mm, 2W, length*diameter=11.9*4.5mm^2, http://www.vishay.com/docs/20128/wkxwrx.pdf +Resistor Axial_DIN0414 series Axial Horizontal pin pitch 25.4mm 2W length 11.9mm diameter 4.5mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0516_L15.5mm_D5.0mm_P5.08mm_Vertical +Resistor, Axial_DIN0516 series, Axial, Vertical, pin pitch=5.08mm, 2W, length*diameter=15.5*5mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf +Resistor Axial_DIN0516 series Axial Vertical pin pitch 5.08mm 2W length 15.5mm diameter 5mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0516_L15.5mm_D5.0mm_P7.62mm_Vertical +Resistor, Axial_DIN0516 series, Axial, Vertical, pin pitch=7.62mm, 2W, length*diameter=15.5*5mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf +Resistor Axial_DIN0516 series Axial Vertical pin pitch 7.62mm 2W length 15.5mm diameter 5mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0516_L15.5mm_D5.0mm_P20.32mm_Horizontal +Resistor, Axial_DIN0516 series, Axial, Horizontal, pin pitch=20.32mm, 2W, length*diameter=15.5*5mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf +Resistor Axial_DIN0516 series Axial Horizontal pin pitch 20.32mm 2W length 15.5mm diameter 5mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0516_L15.5mm_D5.0mm_P25.40mm_Horizontal +Resistor, Axial_DIN0516 series, Axial, Horizontal, pin pitch=25.4mm, 2W, length*diameter=15.5*5mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf +Resistor Axial_DIN0516 series Axial Horizontal pin pitch 25.4mm 2W length 15.5mm diameter 5mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0516_L15.5mm_D5.0mm_P30.48mm_Horizontal +Resistor, Axial_DIN0516 series, Axial, Horizontal, pin pitch=30.48mm, 2W, length*diameter=15.5*5mm^2, http://cdn-reichelt.de/documents/datenblatt/B400/1_4W%23YAG.pdf +Resistor Axial_DIN0516 series Axial Horizontal pin pitch 30.48mm 2W length 15.5mm diameter 5mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0614_L14.3mm_D5.7mm_P5.08mm_Vertical +Resistor, Axial_DIN0614 series, Axial, Vertical, pin pitch=5.08mm, 1.5W, length*diameter=14.3*5.7mm^2 +Resistor Axial_DIN0614 series Axial Vertical pin pitch 5.08mm 1.5W length 14.3mm diameter 5.7mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0614_L14.3mm_D5.7mm_P7.62mm_Vertical +Resistor, Axial_DIN0614 series, Axial, Vertical, pin pitch=7.62mm, 1.5W, length*diameter=14.3*5.7mm^2 +Resistor Axial_DIN0614 series Axial Vertical pin pitch 7.62mm 1.5W length 14.3mm diameter 5.7mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0614_L14.3mm_D5.7mm_P15.24mm_Horizontal +Resistor, Axial_DIN0614 series, Axial, Horizontal, pin pitch=15.24mm, 1.5W, length*diameter=14.3*5.7mm^2 +Resistor Axial_DIN0614 series Axial Horizontal pin pitch 15.24mm 1.5W length 14.3mm diameter 5.7mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0614_L14.3mm_D5.7mm_P20.32mm_Horizontal +Resistor, Axial_DIN0614 series, Axial, Horizontal, pin pitch=20.32mm, 1.5W, length*diameter=14.3*5.7mm^2 +Resistor Axial_DIN0614 series Axial Horizontal pin pitch 20.32mm 1.5W length 14.3mm diameter 5.7mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0614_L14.3mm_D5.7mm_P25.40mm_Horizontal +Resistor, Axial_DIN0614 series, Axial, Horizontal, pin pitch=25.4mm, 1.5W, length*diameter=14.3*5.7mm^2 +Resistor Axial_DIN0614 series Axial Horizontal pin pitch 25.4mm 1.5W length 14.3mm diameter 5.7mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0617_L17.0mm_D6.0mm_P5.08mm_Vertical +Resistor, Axial_DIN0617 series, Axial, Vertical, pin pitch=5.08mm, 2W, length*diameter=17*6mm^2, http://www.vishay.com/docs/20128/wkxwrx.pdf +Resistor Axial_DIN0617 series Axial Vertical pin pitch 5.08mm 2W length 17mm diameter 6mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0617_L17.0mm_D6.0mm_P7.62mm_Vertical +Resistor, Axial_DIN0617 series, Axial, Vertical, pin pitch=7.62mm, 2W, length*diameter=17*6mm^2, http://www.vishay.com/docs/20128/wkxwrx.pdf +Resistor Axial_DIN0617 series Axial Vertical pin pitch 7.62mm 2W length 17mm diameter 6mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0617_L17.0mm_D6.0mm_P20.32mm_Horizontal +Resistor, Axial_DIN0617 series, Axial, Horizontal, pin pitch=20.32mm, 2W, length*diameter=17*6mm^2, http://www.vishay.com/docs/20128/wkxwrx.pdf +Resistor Axial_DIN0617 series Axial Horizontal pin pitch 20.32mm 2W length 17mm diameter 6mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0617_L17.0mm_D6.0mm_P25.40mm_Horizontal +Resistor, Axial_DIN0617 series, Axial, Horizontal, pin pitch=25.4mm, 2W, length*diameter=17*6mm^2, http://www.vishay.com/docs/20128/wkxwrx.pdf +Resistor Axial_DIN0617 series Axial Horizontal pin pitch 25.4mm 2W length 17mm diameter 6mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0617_L17.0mm_D6.0mm_P30.48mm_Horizontal +Resistor, Axial_DIN0617 series, Axial, Horizontal, pin pitch=30.48mm, 2W, length*diameter=17*6mm^2, http://www.vishay.com/docs/20128/wkxwrx.pdf +Resistor Axial_DIN0617 series Axial Horizontal pin pitch 30.48mm 2W length 17mm diameter 6mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0918_L18.0mm_D9.0mm_P7.62mm_Vertical +Resistor, Axial_DIN0918 series, Axial, Vertical, pin pitch=7.62mm, 4W, length*diameter=18*9mm^2 +Resistor Axial_DIN0918 series Axial Vertical pin pitch 7.62mm 4W length 18mm diameter 9mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0918_L18.0mm_D9.0mm_P22.86mm_Horizontal +Resistor, Axial_DIN0918 series, Axial, Horizontal, pin pitch=22.86mm, 4W, length*diameter=18*9mm^2 +Resistor Axial_DIN0918 series Axial Horizontal pin pitch 22.86mm 4W length 18mm diameter 9mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0918_L18.0mm_D9.0mm_P25.40mm_Horizontal +Resistor, Axial_DIN0918 series, Axial, Horizontal, pin pitch=25.4mm, 4W, length*diameter=18*9mm^2 +Resistor Axial_DIN0918 series Axial Horizontal pin pitch 25.4mm 4W length 18mm diameter 9mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0918_L18.0mm_D9.0mm_P30.48mm_Horizontal +Resistor, Axial_DIN0918 series, Axial, Horizontal, pin pitch=30.48mm, 4W, length*diameter=18*9mm^2 +Resistor Axial_DIN0918 series Axial Horizontal pin pitch 30.48mm 4W length 18mm diameter 9mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0922_L20.0mm_D9.0mm_P7.62mm_Vertical +Resistor, Axial_DIN0922 series, Axial, Vertical, pin pitch=7.62mm, 5W, length*diameter=20*9mm^2, http://www.vishay.com/docs/20128/wkxwrx.pdf +Resistor Axial_DIN0922 series Axial Vertical pin pitch 7.62mm 5W length 20mm diameter 9mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0922_L20.0mm_D9.0mm_P25.40mm_Horizontal +Resistor, Axial_DIN0922 series, Axial, Horizontal, pin pitch=25.4mm, 5W, length*diameter=20*9mm^2, http://www.vishay.com/docs/20128/wkxwrx.pdf +Resistor Axial_DIN0922 series Axial Horizontal pin pitch 25.4mm 5W length 20mm diameter 9mm +0 +2 +2 +Resistor_THT +R_Axial_DIN0922_L20.0mm_D9.0mm_P30.48mm_Horizontal +Resistor, Axial_DIN0922 series, Axial, Horizontal, pin pitch=30.48mm, 5W, length*diameter=20*9mm^2, http://www.vishay.com/docs/20128/wkxwrx.pdf +Resistor Axial_DIN0922 series Axial Horizontal pin pitch 30.48mm 5W length 20mm diameter 9mm +0 +2 +2 +Resistor_THT +R_Axial_Power_L20.0mm_W6.4mm_P5.08mm_Vertical +Resistor, Axial_Power series, Axial, Vertical, pin pitch=5.08mm, 4W, length*width*height=20*6.4*6.4mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf +Resistor Axial_Power series Axial Vertical pin pitch 5.08mm 4W length 20mm width 6.4mm height 6.4mm +0 +2 +2 +Resistor_THT +R_Axial_Power_L20.0mm_W6.4mm_P7.62mm_Vertical +Resistor, Axial_Power series, Axial, Vertical, pin pitch=7.62mm, 4W, length*width*height=20*6.4*6.4mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf +Resistor Axial_Power series Axial Vertical pin pitch 7.62mm 4W length 20mm width 6.4mm height 6.4mm +0 +2 +2 +Resistor_THT +R_Axial_Power_L20.0mm_W6.4mm_P22.40mm +Resistor, Axial_Power series, Box, pin pitch=22.4mm, 4W, length*width*height=20*6.4*6.4mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf +Resistor Axial_Power series Box pin pitch 22.4mm 4W length 20mm width 6.4mm height 6.4mm +0 +2 +2 +Resistor_THT +R_Axial_Power_L20.0mm_W6.4mm_P25.40mm +Resistor, Axial_Power series, Box, pin pitch=25.4mm, 4W, length*width*height=20*6.4*6.4mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf +Resistor Axial_Power series Box pin pitch 25.4mm 4W length 20mm width 6.4mm height 6.4mm +0 +2 +2 +Resistor_THT +R_Axial_Power_L20.0mm_W6.4mm_P30.48mm +Resistor, Axial_Power series, Box, pin pitch=30.48mm, 4W, length*width*height=20*6.4*6.4mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf +Resistor Axial_Power series Box pin pitch 30.48mm 4W length 20mm width 6.4mm height 6.4mm +0 +2 +2 +Resistor_THT +R_Axial_Power_L25.0mm_W6.4mm_P27.94mm +Resistor, Axial_Power series, Box, pin pitch=27.94mm, 5W, length*width*height=25*6.4*6.4mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf +Resistor Axial_Power series Box pin pitch 27.94mm 5W length 25mm width 6.4mm height 6.4mm +0 +2 +2 +Resistor_THT +R_Axial_Power_L25.0mm_W6.4mm_P30.48mm +Resistor, Axial_Power series, Box, pin pitch=30.48mm, 5W, length*width*height=25*6.4*6.4mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf +Resistor Axial_Power series Box pin pitch 30.48mm 5W length 25mm width 6.4mm height 6.4mm +0 +2 +2 +Resistor_THT +R_Axial_Power_L25.0mm_W9.0mm_P7.62mm_Vertical +Resistor, Axial_Power series, Axial, Vertical, pin pitch=7.62mm, 7W, length*width*height=25*9*9mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf +Resistor Axial_Power series Axial Vertical pin pitch 7.62mm 7W length 25mm width 9mm height 9mm +0 +2 +2 +Resistor_THT +R_Axial_Power_L25.0mm_W9.0mm_P10.16mm_Vertical +Resistor, Axial_Power series, Axial, Vertical, pin pitch=10.16mm, 7W, length*width*height=25*9*9mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf +Resistor Axial_Power series Axial Vertical pin pitch 10.16mm 7W length 25mm width 9mm height 9mm +0 +2 +2 +Resistor_THT +R_Axial_Power_L25.0mm_W9.0mm_P27.94mm +Resistor, Axial_Power series, Box, pin pitch=27.94mm, 7W, length*width*height=25*9*9mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf +Resistor Axial_Power series Box pin pitch 27.94mm 7W length 25mm width 9mm height 9mm +0 +2 +2 +Resistor_THT +R_Axial_Power_L25.0mm_W9.0mm_P30.48mm +Resistor, Axial_Power series, Box, pin pitch=30.48mm, 7W, length*width*height=25*9*9mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf +Resistor Axial_Power series Box pin pitch 30.48mm 7W length 25mm width 9mm height 9mm +0 +2 +2 +Resistor_THT +R_Axial_Power_L38.0mm_W6.4mm_P40.64mm +Resistor, Axial_Power series, Box, pin pitch=40.64mm, 7W, length*width*height=38*6.4*6.4mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf +Resistor Axial_Power series Box pin pitch 40.64mm 7W length 38mm width 6.4mm height 6.4mm +0 +2 +2 +Resistor_THT +R_Axial_Power_L38.0mm_W6.4mm_P45.72mm +Resistor, Axial_Power series, Box, pin pitch=45.72mm, 7W, length*width*height=38*6.4*6.4mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf +Resistor Axial_Power series Box pin pitch 45.72mm 7W length 38mm width 6.4mm height 6.4mm +0 +2 +2 +Resistor_THT +R_Axial_Power_L38.0mm_W9.0mm_P40.64mm +Resistor, Axial_Power series, Box, pin pitch=40.64mm, 9W, length*width*height=38*9*9mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf +Resistor Axial_Power series Box pin pitch 40.64mm 9W length 38mm width 9mm height 9mm +0 +2 +2 +Resistor_THT +R_Axial_Power_L38.0mm_W9.0mm_P45.72mm +Resistor, Axial_Power series, Box, pin pitch=45.72mm, 9W, length*width*height=38*9*9mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf +Resistor Axial_Power series Box pin pitch 45.72mm 9W length 38mm width 9mm height 9mm +0 +2 +2 +Resistor_THT +R_Axial_Power_L48.0mm_W12.5mm_P7.62mm_Vertical +Resistor, Axial_Power series, Axial, Vertical, pin pitch=7.62mm, 15W, length*width*height=48*12.5*12.5mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf +Resistor Axial_Power series Axial Vertical pin pitch 7.62mm 15W length 48mm width 12.5mm height 12.5mm +0 +2 +2 +Resistor_THT +R_Axial_Power_L48.0mm_W12.5mm_P10.16mm_Vertical +Resistor, Axial_Power series, Axial, Vertical, pin pitch=10.16mm, 15W, length*width*height=48*12.5*12.5mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf +Resistor Axial_Power series Axial Vertical pin pitch 10.16mm 15W length 48mm width 12.5mm height 12.5mm +0 +2 +2 +Resistor_THT +R_Axial_Power_L48.0mm_W12.5mm_P55.88mm +Resistor, Axial_Power series, Box, pin pitch=55.88mm, 15W, length*width*height=48*12.5*12.5mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf +Resistor Axial_Power series Box pin pitch 55.88mm 15W length 48mm width 12.5mm height 12.5mm +0 +2 +2 +Resistor_THT +R_Axial_Power_L48.0mm_W12.5mm_P60.96mm +Resistor, Axial_Power series, Box, pin pitch=60.96mm, 15W, length*width*height=48*12.5*12.5mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf +Resistor Axial_Power series Box pin pitch 60.96mm 15W length 48mm width 12.5mm height 12.5mm +0 +2 +2 +Resistor_THT +R_Axial_Power_L50.0mm_W9.0mm_P55.88mm +Resistor, Axial_Power series, Box, pin pitch=55.88mm, 11W, length*width*height=50*9*9mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf +Resistor Axial_Power series Box pin pitch 55.88mm 11W length 50mm width 9mm height 9mm +0 +2 +2 +Resistor_THT +R_Axial_Power_L50.0mm_W9.0mm_P60.96mm +Resistor, Axial_Power series, Box, pin pitch=60.96mm, 11W, length*width*height=50*9*9mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf +Resistor Axial_Power series Box pin pitch 60.96mm 11W length 50mm width 9mm height 9mm +0 +2 +2 +Resistor_THT +R_Axial_Power_L60.0mm_W14.0mm_P10.16mm_Vertical +Resistor, Axial_Power series, Axial, Vertical, pin pitch=10.16mm, 25W, length*width*height=60*14*14mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf +Resistor Axial_Power series Axial Vertical pin pitch 10.16mm 25W length 60mm width 14mm height 14mm +0 +2 +2 +Resistor_THT +R_Axial_Power_L60.0mm_W14.0mm_P66.04mm +Resistor, Axial_Power series, Box, pin pitch=66.04mm, 25W, length*width*height=60*14*14mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf +Resistor Axial_Power series Box pin pitch 66.04mm 25W length 60mm width 14mm height 14mm +0 +2 +2 +Resistor_THT +R_Axial_Power_L60.0mm_W14.0mm_P71.12mm +Resistor, Axial_Power series, Box, pin pitch=71.12mm, 25W, length*width*height=60*14*14mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf +Resistor Axial_Power series Box pin pitch 71.12mm 25W length 60mm width 14mm height 14mm +0 +2 +2 +Resistor_THT +R_Axial_Power_L75.0mm_W9.0mm_P81.28mm +Resistor, Axial_Power series, Box, pin pitch=81.28mm, 17W, length*width*height=75*9*9mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf +Resistor Axial_Power series Box pin pitch 81.28mm 17W length 75mm width 9mm height 9mm +0 +2 +2 +Resistor_THT +R_Axial_Power_L75.0mm_W9.0mm_P86.36mm +Resistor, Axial_Power series, Box, pin pitch=86.36mm, 17W, length*width*height=75*9*9mm^3, http://cdn-reichelt.de/documents/datenblatt/B400/5WAXIAL_9WAXIAL_11WAXIAL_17WAXIAL%23YAG.pdf +Resistor Axial_Power series Box pin pitch 86.36mm 17W length 75mm width 9mm height 9mm +0 +2 +2 +Resistor_THT +R_Axial_Shunt_L22.2mm_W8.0mm_PS14.30mm_P25.40mm +Resistor, Axial_Shunt series, Box, pin pitch=25.4mm, 3W, length*width*height=22.2*8*8mm^3, shunt pin pitch = 14.30mm, http://www.vishay.com/docs/30217/cpsl.pdf +Resistor Axial_Shunt series Box pin pitch 25.4mm 3W length 22.2mm width 8mm height 8mm shunt pin pitch 14.30mm +0 +4 +4 +Resistor_THT +R_Axial_Shunt_L22.2mm_W9.5mm_PS14.30mm_P25.40mm +Resistor, Axial_Shunt series, Box, pin pitch=25.4mm, 5W, length*width*height=22.2*9.5*9.5mm^3, shunt pin pitch = 14.30mm, http://www.vishay.com/docs/30217/cpsl.pdf +Resistor Axial_Shunt series Box pin pitch 25.4mm 5W length 22.2mm width 9.5mm height 9.5mm shunt pin pitch 14.30mm +0 +4 +4 +Resistor_THT +R_Axial_Shunt_L35.3mm_W9.5mm_PS25.40mm_P38.10mm +Resistor, Axial_Shunt series, Box, pin pitch=38.1mm, 7W, length*width*height=35.3*9.5*9.5mm^3, shunt pin pitch = 25.40mm, http://www.vishay.com/docs/30217/cpsl.pdf +Resistor Axial_Shunt series Box pin pitch 38.1mm 7W length 35.3mm width 9.5mm height 9.5mm shunt pin pitch 25.40mm +0 +4 +4 +Resistor_THT +R_Axial_Shunt_L47.6mm_W9.5mm_PS34.93mm_P50.80mm +Resistor, Axial_Shunt series, Box, pin pitch=50.8mm, 10W, length*width*height=47.6*9.5*9.5mm^3, shunt pin pitch = 34.93mm, http://www.vishay.com/docs/30217/cpsl.pdf +Resistor Axial_Shunt series Box pin pitch 50.8mm 10W length 47.6mm width 9.5mm height 9.5mm shunt pin pitch 34.93mm +0 +4 +4 +Resistor_THT +R_Axial_Shunt_L47.6mm_W12.7mm_PS34.93mm_P50.80mm +Resistor, Axial_Shunt series, Box, pin pitch=50.8mm, 15W, length*width*height=47.6*12.7*12.7mm^3, shunt pin pitch = 34.93mm, http://www.vishay.com/docs/30217/cpsl.pdf +Resistor Axial_Shunt series Box pin pitch 50.8mm 15W length 47.6mm width 12.7mm height 12.7mm shunt pin pitch 34.93mm +0 +4 +4 +Resistor_THT +R_Bare_Metal_Element_L12.4mm_W4.8mm_P11.40mm +Resistor, Bare_Metal_Element series, Bare Metal Strip/Wire, Horizontal, pin pitch=11.4mm, 1W, length*width=12.4*4.8mm^2, https://www.bourns.com/pdfs/PWR4412-2S.pdf +Resistor Bare_Metal_Element series Bare Metal Strip Wire Horizontal pin pitch 11.4mm 1W length 12.4mm width 4.8mm +0 +2 +2 +Resistor_THT +R_Bare_Metal_Element_L16.3mm_W4.8mm_P15.30mm +Resistor, Bare_Metal_Element series, Bare Metal Strip/Wire, Horizontal, pin pitch=15.3mm, 3W, length*width=16.3*4.8mm^2, https://www.bourns.com/pdfs/PWR4412-2S.pdf +Resistor Bare_Metal_Element series Bare Metal Strip Wire Horizontal pin pitch 15.3mm 3W length 16.3mm width 4.8mm +0 +2 +2 +Resistor_THT +R_Bare_Metal_Element_L21.3mm_W4.8mm_P20.30mm +Resistor, Bare_Metal_Element series, Bare Metal Strip/Wire, Horizontal, pin pitch=20.3mm, 5W, length*width=21.3*4.8mm^2, https://www.bourns.com/pdfs/PWR4412-2S.pdf +Resistor Bare_Metal_Element series Bare Metal Strip Wire Horizontal pin pitch 20.3mm 5W length 21.3mm width 4.8mm +0 +2 +2 +Resistor_THT +R_Box_L8.4mm_W2.5mm_P5.08mm +Resistor, Box series, Radial, pin pitch=5.08mm, 0.5W = 1/2W, length*width=8.38*2.54mm^2, http://www.vishay.com/docs/60051/cns020.pdf +Resistor Box series Radial pin pitch 5.08mm 0.5W = 1/2W length 8.38mm width 2.54mm +0 +2 +2 +Resistor_THT +R_Box_L13.0mm_W4.0mm_P9.00mm +Resistor, Box series, Radial, pin pitch=9.00mm, 2W, length*width=13.0*4.0mm^2, http://www.produktinfo.conrad.com/datenblaetter/425000-449999/443860-da-01-de-METALLBAND_WIDERSTAND_0_1_OHM_5W_5Pr.pdf +Resistor Box series Radial pin pitch 9.00mm 2W length 13.0mm width 4.0mm +0 +2 +2 +Resistor_THT +R_Box_L14.0mm_W5.0mm_P9.00mm +Resistor, Box series, Radial, pin pitch=9.00mm, 5W, length*width=14.0*5.0mm^2, http://www.produktinfo.conrad.com/datenblaetter/425000-449999/443860-da-01-de-METALLBAND_WIDERSTAND_0_1_OHM_5W_5Pr.pdf +Resistor Box series Radial pin pitch 9.00mm 5W length 14.0mm width 5.0mm +0 +2 +2 +Resistor_THT +R_Box_L26.0mm_W5.0mm_P20.00mm +Resistor, Box series, Radial, pin pitch=20.00mm, 10W, length*width=26.0*5.0mm^2, http://www.produktinfo.conrad.com/datenblaetter/425000-449999/443860-da-01-de-METALLBAND_WIDERSTAND_0_1_OHM_5W_5Pr.pdf +Resistor Box series Radial pin pitch 20.00mm 10W length 26.0mm width 5.0mm +0 +2 +2 +Resistor_THT +R_Radial_Power_L7.0mm_W8.0mm_Px2.40mm_Py2.30mm +Resistor, Radial_Power series, Radial, pin pitch=2.40*2.30mm^2, 7W, length*width=7*8mm^2, http://www.vitrohm.com/content/files/vitrohm_series_kv_-_201601.pdf +Resistor Radial_Power series Radial pin pitch 2.40*2.30mm^2 7W length 7mm width 8mm +0 +2 +2 +Resistor_THT +R_Radial_Power_L9.0mm_W10.0mm_Px2.70mm_Py2.30mm +Resistor, Radial_Power series, Radial, pin pitch=2.70*2.30mm^2, 17W, length*width=9*10mm^2, http://www.vitrohm.com/content/files/vitrohm_series_kv_-_201601.pdf +Resistor Radial_Power series Radial pin pitch 2.70*2.30mm^2 17W length 9mm width 10mm +0 +2 +2 +Resistor_THT +R_Radial_Power_L11.0mm_W7.0mm_P5.00mm +Resistor, Radial_Power series, Radial, pin pitch=5.00mm, 2W, length*width=11.0*7.0mm^2, http://www.vishay.com/docs/30218/cpcx.pdf +Resistor Radial_Power series Radial pin pitch 5.00mm 2W length 11.0mm width 7.0mm +0 +2 +2 +Resistor_THT +R_Radial_Power_L12.0mm_W8.0mm_P5.00mm +Resistor, Radial_Power series, Radial, pin pitch=5.00mm, 3W, length*width=12.0*8.0mm^2, http://www.vishay.com/docs/30218/cpcx.pdf +Resistor Radial_Power series Radial pin pitch 5.00mm 3W length 12.0mm width 8.0mm +0 +2 +2 +Resistor_THT +R_Radial_Power_L13.0mm_W9.0mm_P5.00mm +Resistor, Radial_Power series, Radial, pin pitch=5.00mm, 7W, length*width=13.0*9.0mm^2, http://www.vishay.com/docs/30218/cpcx.pdf +Resistor Radial_Power series Radial pin pitch 5.00mm 7W length 13.0mm width 9.0mm +0 +2 +2 +Resistor_THT +R_Radial_Power_L16.1mm_W9.0mm_P7.37mm +Resistor, Radial_Power series, Radial, pin pitch=7.37mm, 10W, length*width=16.1*9mm^2, http://www.vishay.com/docs/30218/cpcx.pdf +Resistor Radial_Power series Radial pin pitch 7.37mm 10W length 16.1mm width 9mm +0 +2 +2 +Rotary_Encoder +RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm +Alps rotary encoder, EC12E... with switch, vertical shaft, http://www.alps.com/prod/info/E/HTML/Encoder/Incremental/EC11/EC11E15204A3.html +rotary encoder +0 +7 +6 +Rotary_Encoder +RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm_CircularMountingHoles +Alps rotary encoder, EC12E... with switch, vertical shaft, mounting holes with circular drills, http://www.alps.com/prod/info/E/HTML/Encoder/Incremental/EC11/EC11E15204A3.html +rotary encoder +0 +7 +6 +Rotary_Encoder +RotaryEncoder_Alps_EC11E_Vertical_H20mm +Alps rotary encoder, EC12E... without switch (pins are dummy), vertical shaft, http://www.alps.com/prod/info/E/HTML/Encoder/Incremental/EC11/EC11E15204A3.html +rotary encoder +0 +7 +4 +Rotary_Encoder +RotaryEncoder_Alps_EC11E_Vertical_H20mm_CircularMountingHoles +Alps rotary encoder, EC12E... without switch (pins are dummy), vertical shaft, mounting holes with circular drills, http://www.alps.com/prod/info/E/HTML/Encoder/Incremental/EC11/EC11E15204A3.html +rotary encoder +0 +7 +4 +Rotary_Encoder +RotaryEncoder_Alps_EC12E-Switch_Vertical_H20mm +Alps rotary encoder, EC12E... with switch, vertical shaft, http://www.alps.com/prod/info/E/HTML/Encoder/Incremental/EC12E/EC12E1240405.html & http://cdn-reichelt.de/documents/datenblatt/F100/402097STEC12E08.PDF +rotary encoder +0 +7 +6 +Rotary_Encoder +RotaryEncoder_Alps_EC12E-Switch_Vertical_H20mm_CircularMountingHoles +Alps rotary encoder, EC12E... with switch, vertical shaft, mounting holes with circular drills, http://www.alps.com/prod/info/E/HTML/Encoder/Incremental/EC12E/EC12E1240405.html & http://cdn-reichelt.de/documents/datenblatt/F100/402097STEC12E08.PDF +rotary encoder +0 +7 +6 +Rotary_Encoder +RotaryEncoder_Alps_EC12E_Vertical_H20mm +Alps rotary encoder, EC12E..., vertical shaft, http://www.alps.com/prod/info/E/HTML/Encoder/Incremental/EC12E/EC12E1240405.html +rotary encoder +0 +5 +4 +Rotary_Encoder +RotaryEncoder_Alps_EC12E_Vertical_H20mm_CircularMountingHoles +Alps rotary encoder, EC12E..., vertical shaft, mounting holes with circular drills, http://www.alps.com/prod/info/E/HTML/Encoder/Incremental/EC12E/EC12E1240405.html +rotary encoder +0 +5 +4 +Rotary_Encoder +RotaryEncoder_Bourns_Horizontal_PEC09-2xxxF-Nxxxx +Bourns rotary encoder, PEC09, without switch, horizontal shaft, https://www.bourns.com/products/encoders/contacting-encoders/product/PEC09 +rotary encoder +0 +3 +3 +Rotary_Encoder +RotaryEncoder_Bourns_Horizontal_PEC09-2xxxF-Sxxxx +Bourns rotary encoder, PEC09, with switch, horizontal shaft, https://www.bourns.com/products/encoders/contacting-encoders/product/PEC09 +rotary encoder +0 +5 +5 +Rotary_Encoder +RotaryEncoder_Bourns_Horizontal_PEC12R-2x17F-Nxxxx +Bourns rotary encoder, PEC12R, without switch, horizontal shaft, 17mm shaft length, https://www.bourns.com/docs/product-datasheets/pec12r.pdf +rotary encoder +0 +5 +4 +Rotary_Encoder +RotaryEncoder_Bourns_Horizontal_PEC12R-2x17F-Sxxxx +Bourns rotary encoder, PEC12R, with switch, horizontal shaft, 17mm shaft length, https://www.bourns.com/docs/product-datasheets/pec12r.pdf +rotary encoder +0 +7 +6 +Rotary_Encoder +RotaryEncoder_Bourns_Vertical_PEC12R-3x17F-Nxxxx +Bourns rotary encoder, PEC12R, without switch, with bushing, vertical shaft, 17.5mm shaft, https://www.bourns.com/docs/product-datasheets/pec12r.pdf +rotary encoder +0 +5 +4 +Rotary_Encoder +RotaryEncoder_Bourns_Vertical_PEC12R-3x17F-Sxxxx +Bourns rotary encoder, PEC12R, with switch, with bushing, vertical shaft, 17.5mm shaft, https://www.bourns.com/docs/product-datasheets/pec12r.pdf +rotary encoder +0 +7 +6 +Sensor +ASAIR_AM2302_P2.54mm_Lead2.75mm_TabDown +Temperature and humidity module, http://akizukidenshi.com/download/ds/aosong/AM2302.pdf +Temperature and humidity module DHT22 AM2302 +0 +4 +4 +Sensor +ASAIR_AM2302_P2.54mm_Vertical +Temperature and humidity module, http://akizukidenshi.com/download/ds/aosong/AM2302.pdf +Temperature and humidity module DHT22 AM2302 +0 +4 +4 +Sensor +Aosong_DHT11_5.5x12.0_P2.54mm +Temperature and humidity module, http://akizukidenshi.com/download/ds/aosong/DHT11.pdf +Temperature and humidity module +0 +4 +4 +Sensor +Avago_APDS-9960 +Digital Proximity, Ambient Light, RGB and Gesture Sensor (https://docs.broadcom.com/doc/AV02-4191EN) +DFN Sensor optical IR +0 +8 +8 +Sensor +LuminOX_LOX-O2 +SST LuminOX Luminescence-based O2 sensor, https://sstsensing.com/wp-content/uploads/2021/08/DS0030rev15_LuminOx.pdf +SST LuminOX O2 +0 +4 +4 +Sensor +MQ-6 +Gas Sensor, 6 pin, https://www.winsen-sensor.com/d/files/semiconductor/mq-6.pdf +gas sensor +0 +6 +6 +Sensor +Rohm_RPR-0521RS +Digital Proximity and Ambient Light Sensor, 2.36 x 3.94 x 1.35mm, LGA-8 (https://fscdn.rohm.com/en/products/databook/datasheet/opto/optical_sensor/opto_module/rpr-0521rs-e.pdf) +DFN Sensor optical IR +0 +8 +8 +Sensor +SHT1x +SHT1x +SHT1x +0 +8 +8 +Sensor +SPEC_110-xxx_SMD-10Pin_20x20mm_P4.0mm +SPEC Sensors SMD package, 20x20mm, https://www.spec-sensors.com/wp-content/uploads/2016/10/3SP_H2S_50-C-Package-110-304.pdf +SPEC Sensors gas sensor +0 +10 +10 +Sensor +Senseair_S8_Down +Sensair S8 Series CO2 sensor, 1kHz PWM output, Modbus, THT +co2 gas sensor pwm modbus +0 +9 +9 +Sensor +Senseair_S8_Up +Sensair S8 Series CO2 sensor, 1kHz PWM output, Modbus, THT +co2 gas sensor pwm modbus +0 +9 +9 +Sensor +Sensirion_SCD4x-1EP_10.1x10.1mm_P1.25mm_EP4.8x4.8mm +Sensirion SCD4x QFN, 20 Pin (https://sensirion.com/media/documents/C4B87CE6/627C2DCD/CD_DS_SCD40_SCD41_Datasheet_D1.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py +Sensirion QFN NoLead +0 +25 +21 +Sensor +Sensortech_MiCS_5x7mm_P1.25mm +https://www.sgxsensortech.com/content/uploads/2014/07/1084_Datasheet-MiCS-5524-rev-8.pdf +Sensortech MiCS MEMS sensor +0 +10 +10 +Sensor +Winson_GM-402B_5x5mm_P1.27mm +Winson GM-402B, 8 Pin (https://www.winsen-sensor.com/d/files/me2/mems--gm-402b--manual-v1_1.pdf) +Winson +0 +8 +8 +Sensor_Audio +CUI_CMC-4013-SMT +Omnidirectional, -42dB, reflowable, electret condenser microphone https://www.cuidevices.com/product/resource/cmc-4013-smt-tr.pdf +Microphone CUI +0 +2 +2 +Sensor_Audio +Infineon_PG-LLGA-5-1 +Infineon_PG-LLGA-5-1 StepUp generated footprint, https://www.infineon.com/cms/en/product/packages/PG-LLGA/PG-LLGA-5-1/ +infineon mems microphone +0 +15 +5 +Sensor_Audio +Infineon_PG-LLGA-5-2 +Infineon, IP57, XENSIV, LGA-5, https://www.infineon.com/dgdl/Infineon-IM73A135-DataSheet-v01_00-EN.pdf?fileId=8ac78c8c7f2a768a017fadec36b84500 +MEMS Microphone LGA Dust Water +0 +5 +5 +Sensor_Audio +InvenSense_ICS-43434-6_3.5x2.65mm +TDK InvenSense MEMS I2S Microphone: https://invensense.tdk.com/products/ics-43434/ +microphone MEMS I2S ICS-43434 TDK InvenSense +0 +6 +6 +Sensor_Audio +Knowles_LGA-5_3.5x2.65mm +https://www.knowles.com/docs/default-source/model-downloads/sph0641lu4h-1-revb.pdf +MEMS Microphone LGA +0 +5 +5 +Sensor_Audio +Knowles_LGA-6_4.72x3.76mm +Knowles MEMS Analog Microphone, Omnidirectional, SMD, Differential/Single-Ended Output, -40dB, Bottom Port, https://www.knowles.com/docs/default-source/default-document-library/spm0687lr5h-1_winfrey_datasheet.pdf +SPM0687LR5H MEMS Microphone LGA +0 +6 +6 +Sensor_Audio +Knowles_SPH0645LM4H-6_3.5x2.65mm +Knowles MEMS I2S Microphone: https://www.knowles.com/subdepartment/dpt-microphones/subdpt-sisonic-surface-mount-mems +microphone MEMS I2S SPH0645LM4H Knowles +0 +6 +6 +Sensor_Audio +ST_HLGA-6_3.76x4.72mm_P1.65mm +http://www.st.com/content/ccc/resource/technical/document/datasheet/group3/27/62/48/98/44/54/4d/36/DM00303211/files/DM00303211.pdf/jcr:content/translations/en.DM00303211.pdf +HLGA Sensor Audio +0 +6 +6 +Sensor_Current +AKM_CQ_7 +AKM Current Sensor, 7 pin, THT (http://www.akm.com/akm/en/file/datasheet/CQ-236B.pdf) +akm current sensor tht +0 +39 +7 +Sensor_Current +AKM_CQ_7S +AKM Current Sensor, 7 pin, SMD (http://www.akm.com/akm/en/file/datasheet/CQ-236B.pdf) +akm current sensor smd +0 +19 +7 +Sensor_Current +AKM_CQ_VSOP-24_5.6x7.9mm_P0.65mm +AKM VSOP-24 current sensor, 5.6x7.9mm body, 0.65mm pitch (http://www.akm.com/akm/en/file/datasheet/CQ-330J.pdf) +akm vsop 24 +0 +10 +10 +Sensor_Current +AKM_CZ_SSOP-10_6.5x8.1mm_P0.95mm +AKM CZ-381x current sensor, 6.5x8.1mm body, 0.95mm pitch (http://www.akm.com/akm/en/product/detail/0009/) +akm cz-381x 10 +0 +10 +10 +Sensor_Current +Allegro_CB_PFF +Allegro MicroSystems, CB-PFF Package (http://www.allegromicro.com/en/Products/Current-Sensor-ICs/Fifty-To-Two-Hundred-Amp-Integrated-Conductor-Sensor-ICs/ACS758.aspx) !PADS 4-5 DO NOT MATCH DATASHEET! +Allegro CB-PFF +0 +37 +5 +Sensor_Current +Allegro_CB_PSF +Allegro MicroSystems, CB-PSF Package (http://www.allegromicro.com/en/Products/Current-Sensor-ICs/Fifty-To-Two-Hundred-Amp-Integrated-Conductor-Sensor-ICs/ACS758.aspx) +Allegro CB-PSF +0 +5 +5 +Sensor_Current +Allegro_CB_PSS +Allegro MicroSystems, CB-PSS Package (http://www.allegromicro.com/en/Products/Current-Sensor-ICs/Fifty-To-Two-Hundred-Amp-Integrated-Conductor-Sensor-ICs/ACS758.aspx) +Allegro CB-PSS +0 +5 +5 +Sensor_Current +Allegro_PSOF-7_4.8x6.4mm_P1.60mm +Allegro Microsystems PSOF-7, 4.8x6.4mm Body, 1.60mm Pitch (http://www.allegromicro.com/~/media/Files/Datasheets/ACS780-Datasheet.ashx) +Allegro PSOF-7 +0 +7 +7 +Sensor_Current +Allegro_QFN-12-10-1EP_3x3mm_P0.5mm +Allegro Microsystems 12-Lead (10-Lead Populated) Quad Flat Pack, 3x3mm Body, 0.5mm Pitch (http://www.allegromicro.com/~/media/Files/Datasheets/ACS711-Datasheet.ashx) +Allegro QFN 0.5 +0 +14 +10 +Sensor_Current +Allegro_QSOP-24_3.9x8.7mm_P0.635mm +Allegro Microsystems 24-Lead Plastic Shrink Small Outline Narrow Body Body [QSOP] (http://www.allegromicro.com/~/media/Files/Datasheets/ACS726-Datasheet.ashx?la=en) +Allegro QSOP 0.635 +0 +24 +24 +Sensor_Current +Allegro_SIP-3 +Allegro Microsystems SIP-3, 1.27mm Pitch (http://www.allegromicro.com/~/media/Files/Datasheets/A1369-Datasheet.ashx) +Allegro SIP-3 +0 +3 +3 +Sensor_Current +Allegro_SIP-4 +Allegro Microsystems SIP-4, 1.27mm Pitch (http://www.allegromicro.com/~/media/Files/Datasheets/A1363-Datasheet.ashx) +Allegro SIP-4 +0 +4 +4 +Sensor_Current +Diodes_SIP-3_4.1x1.5mm_P1.27mm +Diodes SIP-3 Bulk Pack, 1.27mm Pitch (https://www.diodes.com/assets/Package-Files/SIP-3-Bulk-Pack.pdf) +Diodes SIP-3 Bulk Pack +0 +3 +3 +Sensor_Current +Diodes_SIP-3_4.1x1.5mm_P2.65mm +Diodes SIP-3 Ammo Pack, 2.65mm Pitch (https://www.diodes.com/assets/Package-Files/SIP-3-Ammo-Pack.pdf) +Diodes SIP-3 Ammo Pack +0 +3 +3 +Sensor_Current +Honeywell_CSLW +https://sensing.honeywell.com/honeywell-sensing-cslw-series-product-sheet-005861-1-en.pdf +Miniature Wired Open-Loop Current Sensor +0 +5 +5 +Sensor_Current +LEM_CKSR +LEM CKSR 6/15/25/50/75-NP Current Transducer, https://www.lem.com/sites/default/files/products_datasheets/cksr_75-np.pdf +current transducer LEM +0 +14 +14 +Sensor_Current +LEM_HO8-NP +LEM HO 8/15/25-NP Current Transducer (https://www.lem.com/sites/default/files/products_datasheets/ho-np-0000_series.pdf) +current transducer +0 +13 +13 +Sensor_Current +LEM_HO8-NSM +LEM HO 8/15/25-NSM Current Transducer (https://www.lem.com/sites/default/files/products_datasheets/ho-nsm-0000_series.pdf) +current transducer +0 +13 +13 +Sensor_Current +LEM_HO40-NP +LEM HO 40/60/120/150-NP Current Transducer (https://www.lem.com/sites/default/files/products_datasheets/ho-np_0100__1100_series.pdf) +current transducer +0 +13 +13 +Sensor_Current +LEM_HTFS +LEM HTFS x00-P current transducer (https://www.lem.com/sites/default/files/products_datasheets/htfs_200_800-p.pdf) +HTFS current transducer +0 +4 +4 +Sensor_Current +LEM_HX02-P +LEM HX02-P hall effect current transducer (https://www.lem.com/sites/default/files/products_datasheets/hx%202_6-p_e%20v5.pdf) +hall current +0 +6 +6 +Sensor_Current +LEM_HX03-P-SP2 +LEM HX03-P-SP2 hall effect current transducer (https://www.lem.com/sites/default/files/products_datasheets/hx%203_50-p_sp2_e%20v07.pdf) +hall current +0 +6 +6 +Sensor_Current +LEM_HX04-P +LEM HX04-P hall effect current transducer (https://www.lem.com/sites/default/files/products_datasheets/hx%202_6-p_e%20v5.pdf) +hall current +0 +6 +6 +Sensor_Current +LEM_HX05-NP +LEM HX05-NP hall effect current transducer (https://www.lem.com/sites/default/files/products_datasheets/hx%205_15-np_e%20v10.pdf) +hall current +0 +8 +8 +Sensor_Current +LEM_HX05-P-SP2 +LEM HX05-P-SP2 hall effect current transducer (https://www.lem.com/sites/default/files/products_datasheets/hx%203_50-p_sp2_e%20v07.pdf) +hall current +0 +6 +6 +Sensor_Current +LEM_HX06-P +LEM HX06-P hall effect current transducer (https://www.lem.com/sites/default/files/products_datasheets/hx%202_6-p_e%20v5.pdf) +hall current +0 +6 +6 +Sensor_Current +LEM_HX10-NP +LEM HX10-NP hall effect current transducer (https://www.lem.com/sites/default/files/products_datasheets/hx%205_15-np_e%20v10.pdf) +hall current +0 +8 +8 +Sensor_Current +LEM_HX10-P-SP2 +LEM HX10-P-SP2 hall effect current transducer (https://www.lem.com/sites/default/files/products_datasheets/hx%203_50-p_sp2_e%20v07.pdf) +hall current +0 +6 +6 +Sensor_Current +LEM_HX15-NP +LEM HX15-NP hall effect current transducer (https://www.lem.com/sites/default/files/products_datasheets/hx%205_15-np_e%20v10.pdf) +hall current +0 +8 +8 +Sensor_Current +LEM_HX15-P-SP2 +LEM HX15-P-SP2 hall effect current transducer (https://www.lem.com/sites/default/files/products_datasheets/hx%203_50-p_sp2_e%20v07.pdf) +hall current +0 +6 +6 +Sensor_Current +LEM_HX20-P-SP2 +LEM HX20-P-SP2 hall effect current transducer (https://www.lem.com/sites/default/files/products_datasheets/hx%203_50-p_sp2_e%20v07.pdf) +hall current +0 +6 +6 +Sensor_Current +LEM_HX25-P-SP2 +LEM HX25-P-SP2 hall effect current transducer (https://www.lem.com/sites/default/files/products_datasheets/hx%203_50-p_sp2_e%20v07.pdf) +hall current +0 +6 +6 +Sensor_Current +LEM_HX50-P-SP2 +LEM HX50-P-SP2 hall effect current transducer (https://www.lem.com/sites/default/files/products_datasheets/hx%203_50-p_sp2_e%20v07.pdf) +hall current +0 +6 +6 +Sensor_Current +LEM_LA25-P +LEM Current Transducer (https://www.lem.com/sites/default/files/products_datasheets/la_25-p.pdf) +current transducer +0 +3 +3 +Sensor_Current +LEM_LTSR-NP +LEM current transducer LEM_LTSR-NP 5V supply voltage series https://www.lem.com/sites/default/files/products_datasheets/ltsr_6-np.pdf +Current transducer +0 +10 +10 +Sensor_Distance +ST_VL53L1x +VL53L1x distance sensor +VL53L1CXV0FY1 VL53L1x +0 +13 +12 +Sensor_Humidity +Sensirion_DFN-4-1EP_2x2mm_P1mm_EP0.7x1.6mm +DFN, 4 Pin (https://www.sensirion.com/fileadmin/user_upload/customers/sensirion/Dokumente/0_Datasheets/Humidity/Sensirion_Humidity_Sensors_SHTC3_Datasheet.pdf) +Sensirion DFN NoLead +0 +10 +5 +Sensor_Humidity +Sensirion_DFN-4_1.5x1.5mm_P0.8mm_SHT4x_NoCentralPad +Sensirion, SHT40, SHT41, SHT45, DFN, 4 Pin (https://sensirion.com/media/documents/33FD6951/624C4357/Datasheet_SHT4x.pdf) +DFN NoLead +0 +4 +4 +Sensor_Humidity +Sensirion_DFN-8-1EP_2.5x2.5mm_P0.5mm_EP1.1x1.7mm +Sensirion DFN-8 SHT3x-DIS (https://www.sensirion.com/fileadmin/user_upload/customers/sensirion/Dokumente/2_Humidity_Sensors/Datasheets/Sensirion_Humidity_Sensors_SHT3x_Datasheet_digital.pdf) +sensirion dfn nolead +0 +10 +9 +Sensor_Motion +Analog_LGA-16_3.25x3mm_P0.5mm_LayoutBorder3x5y +LGA, 16 Pin (https://www.analog.com/media/en/technical-documentation/data-sheets/ADXL363.pdf#page=44) +LGA NoLead CC-16-4 +0 +16 +16 +Sensor_Motion +InvenSense_QFN-24_3x3mm_P0.4mm +24-Lead Plastic QFN (3mm x 3mm); Pitch 0.4mm; EP 1.7x1.54mm; for InvenSense motion sensors; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU9250REV1.0.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf) +QFN 0.4 +0 +24 +24 +Sensor_Motion +InvenSense_QFN-24_3x3mm_P0.4mm_NoMask +24-Lead Plastic QFN (3mm x 3mm); Pitch 0.4mm; EP 1.7x1.54mm; for InvenSense motion sensors; Mask removed below exposed pad; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU9250REV1.0.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf) +QFN 0.4 +0 +25 +24 +Sensor_Motion +InvenSense_QFN-24_4x4mm_P0.5mm +24-Lead Plastic QFN (4mm x 4mm); Pitch 0.5mm; EP 2.7x2.6mm; for InvenSense motion sensors; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU-6050_DataSheet_V3%204.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf) +QFN 0.5 +0 +24 +24 +Sensor_Motion +InvenSense_QFN-24_4x4mm_P0.5mm_NoMask +24-Lead Plastic QFN (4mm x 4mm); Pitch 0.5mm; EP 2.7x2.6mm; for InvenSense motion sensors; Mask removed below exposed pad; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU-6050_DataSheet_V3%204.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf) +QFN 0.5 +0 +25 +24 +Sensor_Pressure +CFSensor_XGZP6897x +Port External Dia 3.13mm, Port Internal Dia 0.9mm, 8 Pin (https://cfsensor.com/wp-content/uploads/2022/11/XGZP6897D-Pressure-Sensor-V2.7.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py, hand modified +sop sensor +0 +8 +8 +Sensor_Pressure +CFSensor_XGZP6899x +Port External Dia 3mm, Port Internal Dia 1mm, 8 Pin (https://cfsensor.com/wp-content/uploads/2022/11/XGZP6899D-Pressure-Sensor-V2.8.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py, hand modified +sop sensor +0 +8 +8 +Sensor_Pressure +Freescale_98ARH99066A +https://www.nxp.com/docs/en/data-sheet/MPXH6250A.pdf +sensor pressure ssop 98ARH99066A +0 +8 +8 +Sensor_Pressure +Freescale_98ARH99089A +https://www.nxp.com/docs/en/data-sheet/MPXH6250A.pdf +sensor pressure ssop 98ARH99089A +0 +8 +8 +Sensor_Pressure +Honeywell_40PCxxxG1A +https://www.honeywellscportal.com/index.php?ci_id=138832 +pressure sensor automotive honeywell +0 +3 +3 +Sensor_Pressure +TE_MS5525DSO-DBxxxyS +Pressure Sensor, Dual-Barbed, https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=MS5525DSO&DocType=DS&DocLang=English +Pressure DualBarbed +0 +14 +14 +Sensor_Pressure +TE_MS5837-xxBA +https://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Data+Sheet%7FMS5837-30BA%7FB1%7Fpdf%7FEnglish%7FENG_DS_MS5837-30BA_B1.pdf%7FCAT-BLPS0017 +MS5837 Ultra-small gel-filled pressure sensor with stainless steel cap +0 +4 +4 +Sensor_Voltage +LEM_LV25-P +LEM LV25-P Voltage transducer, https://www.lem.com/sites/default/files/products_datasheets/lv_25-p.pdf +LEM Hall Effect Voltage transducer +0 +5 +5 +Socket +3M_Textool_240-1288-00-0602J_2x20_P2.54mm +3M 40-pin zero insertion force socket, though-hole, row spacing 25.4 mm (1000 mils) +THT DIP DIL ZIF 25.4mm 1000mil Socket +0 +40 +40 +Socket +DIP_Socket-14_W4.3_W5.08_W7.62_W10.16_W10.9_3M_214-3339-00-0602J +3M 14-pin zero insertion force socket, through-hole, row spacing 7.62 mm (300 mils), http://multimedia.3m.com/mws/media/494546O/3mtm-dip-sockets-100-2-54-mm-ts0365.pdf +THT DIP DIL ZIF 7.62mm 300mil Socket +0 +14 +14 +Socket +DIP_Socket-16_W4.3_W5.08_W7.62_W10.16_W10.9_3M_216-3340-00-0602J +3M 16-pin zero insertion force socket, through-hole, row spacing 7.62 mm (300 mils), http://multimedia.3m.com/mws/media/494546O/3mtm-dip-sockets-100-2-54-mm-ts0365.pdf +THT DIP DIL ZIF 7.62mm 300mil Socket +0 +16 +16 +Socket +DIP_Socket-18_W4.3_W5.08_W7.62_W10.16_W10.9_3M_218-3341-00-0602J +3M 18-pin zero insertion force socket, through-hole, row spacing 7.62 mm (300 mils), http://multimedia.3m.com/mws/media/494546O/3mtm-dip-sockets-100-2-54-mm-ts0365.pdf +THT DIP DIL ZIF 7.62mm 300mil Socket +0 +18 +18 +Socket +DIP_Socket-20_W4.3_W5.08_W7.62_W10.16_W10.9_3M_220-3342-00-0602J +3M 20-pin zero insertion force socket, through-hole, row spacing 7.62 mm (300 mils), http://multimedia.3m.com/mws/media/494546O/3mtm-dip-sockets-100-2-54-mm-ts0365.pdf +THT DIP DIL ZIF 7.62mm 300mil Socket +0 +20 +20 +Socket +DIP_Socket-22_W6.9_W7.62_W10.16_W12.7_W13.5_3M_222-3343-00-0602J +3M 22-pin zero insertion force socket, through-hole, row spacing 10.16 mm (400 mils), http://multimedia.3m.com/mws/media/494546O/3mtm-dip-sockets-100-2-54-mm-ts0365.pdf +THT DIP DIL ZIF 10.16mm 400mil Socket +0 +22 +22 +Socket +DIP_Socket-24_W4.3_W5.08_W7.62_W10.16_W10.9_3M_224-5248-00-0602J +3M 24-pin zero insertion force socket, through-hole, row spacing 7.62 mm (300 mils), http://multimedia.3m.com/mws/media/494546O/3mtm-dip-sockets-100-2-54-mm-ts0365.pdf +THT DIP DIL ZIF 7.62mm 300mil Socket +0 +24 +24 +Socket +DIP_Socket-24_W11.9_W12.7_W15.24_W17.78_W18.5_3M_224-1275-00-0602J +3M 24-pin zero insertion force socket, through-hole, row spacing 15.24 mm (600 mils), http://multimedia.3m.com/mws/media/494546O/3mtm-dip-sockets-100-2-54-mm-ts0365.pdf +THT DIP DIL ZIF 15.24mm 600mil Socket +0 +24 +24 +Socket +DIP_Socket-28_W6.9_W7.62_W10.16_W12.7_W13.5_3M_228-4817-00-0602J +3M 28-pin zero insertion force socket, through-hole, row spacing 10.16 mm (400 mils), http://multimedia.3m.com/mws/media/494546O/3mtm-dip-sockets-100-2-54-mm-ts0365.pdf +THT DIP DIL ZIF 10.16mm 400mil Socket +0 +28 +28 +Socket +DIP_Socket-28_W11.9_W12.7_W15.24_W17.78_W18.5_3M_228-1277-00-0602J +3M 28-pin zero insertion force socket, through-hole, row spacing 15.24 mm (600 mils), http://multimedia.3m.com/mws/media/494546O/3mtm-dip-sockets-100-2-54-mm-ts0365.pdf +THT DIP DIL ZIF 15.24mm 600mil Socket +0 +28 +28 +Socket +DIP_Socket-32_W11.9_W12.7_W15.24_W17.78_W18.5_3M_232-1285-00-0602J +3M 32-pin zero insertion force socket, through-hole, row spacing 15.24 mm (600 mils), http://multimedia.3m.com/mws/media/494546O/3mtm-dip-sockets-100-2-54-mm-ts0365.pdf +THT DIP DIL ZIF 15.24mm 600mil Socket +0 +32 +32 +Socket +DIP_Socket-40_W11.9_W12.7_W15.24_W17.78_W18.5_3M_240-1280-00-0602J +3M 40-pin zero insertion force socket, through-hole, row spacing 15.24 mm (600 mils), http://multimedia.3m.com/mws/media/494546O/3mtm-dip-sockets-100-2-54-mm-ts0365.pdf +THT DIP DIL ZIF 15.24mm 600mil Socket +0 +40 +40 +Socket +DIP_Socket-40_W22.1_W22.86_W25.4_W27.94_W28.7_3M_240-3639-00-0602J +3M 40-pin zero insertion force socket, through-hole, row spacing 25.4 mm (1000 mils), http://multimedia.3m.com/mws/media/494546O/3mtm-dip-sockets-100-2-54-mm-ts0365.pdf +THT DIP DIL ZIF 25.4mm 1000mil Socket +0 +40 +40 +Socket +DIP_Socket-42_W11.9_W12.7_W15.24_W17.78_W18.5_3M_242-1281-00-0602J +3M 42-pin zero insertion force socket, through-hole, row spacing 15.24 mm (600 mils), http://multimedia.3m.com/mws/media/494546O/3mtm-dip-sockets-100-2-54-mm-ts0365.pdf +THT DIP DIL ZIF 15.24mm 600mil Socket +0 +42 +42 +Socket +Wells_648-0482211SA01 +https://www.farnell.com/cad/316865.pdf?_ga=2.37208032.177107060.1530611323-249019997.1498114824 +48pin TSOP Socket +0 +48 +48 +Symbol +CE-Logo_8.5x6mm_SilkScreen +CE marking +Logo CE certification +0 +0 +0 +Symbol +CE-Logo_11.2x8mm_SilkScreen +CE marking +Logo CE certification +0 +0 +0 +Symbol +CE-Logo_16.8x12mm_SilkScreen +CE marking +Logo CE certification +0 +0 +0 +Symbol +CE-Logo_28x20mm_SilkScreen +CE marking +Logo CE certification +0 +0 +0 +Symbol +CE-Logo_42x30mm_SilkScreen +CE marking +Logo CE certification +0 +0 +0 +Symbol +CE-Logo_56.1x40mm_SilkScreen +CE marking +Logo CE certification +0 +0 +0 +Symbol +ESD-Logo_6.6x6mm_SilkScreen +Electrostatic discharge Logo +Logo ESD +0 +0 +0 +Symbol +ESD-Logo_8.9x8mm_SilkScreen +Electrostatic discharge Logo +Logo ESD +0 +0 +0 +Symbol +ESD-Logo_13.2x12mm_SilkScreen +Electrostatic discharge Logo +Logo ESD +0 +0 +0 +Symbol +ESD-Logo_22x20mm_SilkScreen +Electrostatic discharge Logo +Logo ESD +0 +0 +0 +Symbol +ESD-Logo_33x30mm_SilkScreen +Electrostatic discharge Logo +Logo ESD +0 +0 +0 +Symbol +ESD-Logo_44.1x40mm_SilkScreen +Electrostatic discharge Logo +Logo ESD +0 +0 +0 +Symbol +EasterEgg_EWG1308-2013_ClassA +Egg with 42x60mm Body-Size, ClassA, according to EWG1308/2013 +egg easter +0 +0 +0 +Symbol +FCC-Logo_7.3x6mm_SilkScreen +FCC marking +Logo FCC certification +0 +0 +0 +Symbol +FCC-Logo_9.6x8mm_SilkScreen +FCC marking +Logo FCC certification +0 +0 +0 +Symbol +FCC-Logo_14.6x12mm_SilkScreen +FCC marking +Logo FCC certification +0 +0 +0 +Symbol +FCC-Logo_24.2x20mm_SilkScreen +FCC marking +Logo FCC certification +0 +0 +0 +Symbol +FCC-Logo_36.3x30mm_SilkScreen +FCC marking +Logo FCC certification +0 +0 +0 +Symbol +FCC-Logo_48.3x40mm_SilkScreen +FCC marking +Logo FCC certification +0 +0 +0 +Symbol +KiCad-Logo2_5mm_Copper +KiCad Logo +Logo KiCad +0 +0 +0 +Symbol +KiCad-Logo2_5mm_SilkScreen +KiCad Logo +Logo KiCad +0 +0 +0 +Symbol +KiCad-Logo2_6mm_Copper +KiCad Logo +Logo KiCad +0 +0 +0 +Symbol +KiCad-Logo2_6mm_SilkScreen +KiCad Logo +Logo KiCad +0 +0 +0 +Symbol +KiCad-Logo2_8mm_Copper +KiCad Logo +Logo KiCad +0 +0 +0 +Symbol +KiCad-Logo2_8mm_SilkScreen +KiCad Logo +Logo KiCad +0 +0 +0 +Symbol +KiCad-Logo2_12mm_Copper +KiCad Logo +Logo KiCad +0 +0 +0 +Symbol +KiCad-Logo2_12mm_SilkScreen +KiCad Logo +Logo KiCad +0 +0 +0 +Symbol +KiCad-Logo2_20mm_Copper +KiCad Logo +Logo KiCad +0 +0 +0 +Symbol +KiCad-Logo2_20mm_SilkScreen +KiCad Logo +Logo KiCad +0 +0 +0 +Symbol +KiCad-Logo2_30mm_Copper +KiCad Logo +Logo KiCad +0 +0 +0 +Symbol +KiCad-Logo2_30mm_SilkScreen +KiCad Logo +Logo KiCad +0 +0 +0 +Symbol +KiCad-Logo2_40mm_Copper +KiCad Logo +Logo KiCad +0 +0 +0 +Symbol +KiCad-Logo2_40mm_SilkScreen +KiCad Logo +Logo KiCad +0 +0 +0 +Symbol +KiCad-Logo_5mm_Copper +KiCad Logo +Logo KiCad +0 +0 +0 +Symbol +KiCad-Logo_5mm_SilkScreen +KiCad Logo +Logo KiCad +0 +0 +0 +Symbol +KiCad-Logo_6mm_Copper +KiCad Logo +Logo KiCad +0 +0 +0 +Symbol +KiCad-Logo_6mm_SilkScreen +KiCad Logo +Logo KiCad +0 +0 +0 +Symbol +KiCad-Logo_8mm_Copper +KiCad Logo +Logo KiCad +0 +0 +0 +Symbol +KiCad-Logo_8mm_SilkScreen +KiCad Logo +Logo KiCad +0 +0 +0 +Symbol +KiCad-Logo_12mm_Copper +KiCad Logo +Logo KiCad +0 +0 +0 +Symbol +KiCad-Logo_12mm_SilkScreen +KiCad Logo +Logo KiCad +0 +0 +0 +Symbol +KiCad-Logo_20mm_Copper +KiCad Logo +Logo KiCad +0 +0 +0 +Symbol +KiCad-Logo_20mm_SilkScreen +KiCad Logo +Logo KiCad +0 +0 +0 +Symbol +KiCad-Logo_30mm_Copper +KiCad Logo +Logo KiCad +0 +0 +0 +Symbol +KiCad-Logo_30mm_SilkScreen +KiCad Logo +Logo KiCad +0 +0 +0 +Symbol +KiCad-Logo_40mm_Copper +KiCad Logo +Logo KiCad +0 +0 +0 +Symbol +KiCad-Logo_40mm_SilkScreen +KiCad Logo +Logo KiCad +0 +0 +0 +Symbol +OSHW-Logo2_7.3x6mm_Copper +Open Source Hardware Symbol +Logo Symbol OSHW +0 +0 +0 +Symbol +OSHW-Logo2_7.3x6mm_SilkScreen +Open Source Hardware Symbol +Logo Symbol OSHW +0 +0 +0 +Symbol +OSHW-Logo2_9.8x8mm_Copper +Open Source Hardware Symbol +Logo Symbol OSHW +0 +0 +0 +Symbol +OSHW-Logo2_9.8x8mm_SilkScreen +Open Source Hardware Symbol +Logo Symbol OSHW +0 +0 +0 +Symbol +OSHW-Logo2_14.6x12mm_Copper +Open Source Hardware Symbol +Logo Symbol OSHW +0 +0 +0 +Symbol +OSHW-Logo2_14.6x12mm_SilkScreen +Open Source Hardware Symbol +Logo Symbol OSHW +0 +0 +0 +Symbol +OSHW-Logo2_24.3x20mm_Copper +Open Source Hardware Symbol +Logo Symbol OSHW +0 +0 +0 +Symbol +OSHW-Logo2_24.3x20mm_SilkScreen +Open Source Hardware Symbol +Logo Symbol OSHW +0 +0 +0 +Symbol +OSHW-Logo2_36.5x30mm_Copper +Open Source Hardware Symbol +Logo Symbol OSHW +0 +0 +0 +Symbol +OSHW-Logo2_36.5x30mm_SilkScreen +Open Source Hardware Symbol +Logo Symbol OSHW +0 +0 +0 +Symbol +OSHW-Logo2_48.7x40mm_Copper +Open Source Hardware Symbol +Logo Symbol OSHW +0 +0 +0 +Symbol +OSHW-Logo2_48.7x40mm_SilkScreen +Open Source Hardware Symbol +Logo Symbol OSHW +0 +0 +0 +Symbol +OSHW-Logo_5.7x6mm_Copper +Open Source Hardware Logo +Logo OSHW +0 +0 +0 +Symbol +OSHW-Logo_5.7x6mm_SilkScreen +Open Source Hardware Logo +Logo OSHW +0 +0 +0 +Symbol +OSHW-Logo_7.5x8mm_Copper +Open Source Hardware Logo +Logo OSHW +0 +0 +0 +Symbol +OSHW-Logo_7.5x8mm_SilkScreen +Open Source Hardware Logo +Logo OSHW +0 +0 +0 +Symbol +OSHW-Logo_11.4x12mm_Copper +Open Source Hardware Logo +Logo OSHW +0 +0 +0 +Symbol +OSHW-Logo_11.4x12mm_SilkScreen +Open Source Hardware Logo +Logo OSHW +0 +0 +0 +Symbol +OSHW-Logo_19x20mm_Copper +Open Source Hardware Logo +Logo OSHW +0 +0 +0 +Symbol +OSHW-Logo_19x20mm_SilkScreen +Open Source Hardware Logo +Logo OSHW +0 +0 +0 +Symbol +OSHW-Logo_28.5x30mm_Copper +Open Source Hardware Logo +Logo OSHW +0 +0 +0 +Symbol +OSHW-Logo_28.5x30mm_SilkScreen +Open Source Hardware Logo +Logo OSHW +0 +0 +0 +Symbol +OSHW-Logo_38.1x40mm_Copper +Open Source Hardware Logo +Logo OSHW +0 +0 +0 +Symbol +OSHW-Logo_38.1x40mm_SilkScreen +Open Source Hardware Logo +Logo OSHW +0 +0 +0 +Symbol +OSHW-Symbol_6.7x6mm_Copper +Open Source Hardware Symbol +Logo Symbol OSHW +0 +0 +0 +Symbol +OSHW-Symbol_6.7x6mm_SilkScreen +Open Source Hardware Symbol +Logo Symbol OSHW +0 +0 +0 +Symbol +OSHW-Symbol_8.9x8mm_Copper +Open Source Hardware Symbol +Logo Symbol OSHW +0 +0 +0 +Symbol +OSHW-Symbol_8.9x8mm_SilkScreen +Open Source Hardware Symbol +Logo Symbol OSHW +0 +0 +0 +Symbol +OSHW-Symbol_13.4x12mm_Copper +Open Source Hardware Symbol +Logo Symbol OSHW +0 +0 +0 +Symbol +OSHW-Symbol_13.4x12mm_SilkScreen +Open Source Hardware Symbol +Logo Symbol OSHW +0 +0 +0 +Symbol +OSHW-Symbol_22.3x20mm_Copper +Open Source Hardware Symbol +Logo Symbol OSHW +0 +0 +0 +Symbol +OSHW-Symbol_22.3x20mm_SilkScreen +Open Source Hardware Symbol +Logo Symbol OSHW +0 +0 +0 +Symbol +OSHW-Symbol_33.5x30mm_Copper +Open Source Hardware Symbol +Logo Symbol OSHW +0 +0 +0 +Symbol +OSHW-Symbol_33.5x30mm_SilkScreen +Open Source Hardware Symbol +Logo Symbol OSHW +0 +0 +0 +Symbol +OSHW-Symbol_44.5x40mm_Copper +Open Source Hardware Symbol +Logo Symbol OSHW +0 +0 +0 +Symbol +OSHW-Symbol_44.5x40mm_SilkScreen +Open Source Hardware Symbol +Logo Symbol OSHW +0 +0 +0 +Symbol +Polarity_Center_Negative_6mm_SilkScreen +Polarity Logo, Center Negative +Logo Polarity Center Negative +0 +0 +0 +Symbol +Polarity_Center_Negative_8mm_SilkScreen +Polarity Logo, Center Negative +Logo Polarity Center Negative +0 +0 +0 +Symbol +Polarity_Center_Negative_12mm_SilkScreen +Polarity Logo, Center Negative +Logo Polarity Center Negative +0 +0 +0 +Symbol +Polarity_Center_Negative_20mm_SilkScreen +Polarity Logo, Center Negative +Logo Polarity Center Negative +0 +0 +0 +Symbol +Polarity_Center_Negative_30mm_SilkScreen +Polarity Logo, Center Negative +Logo Polarity Center Negative +0 +0 +0 +Symbol +Polarity_Center_Negative_40mm_SilkScreen +Polarity Logo, Center Negative +Logo Polarity Center Negative +0 +0 +0 +Symbol +Polarity_Center_Positive_6mm_SilkScreen +Polarity Logo, Center Positive +Logo Polarity Center Positive +0 +0 +0 +Symbol +Polarity_Center_Positive_8mm_SilkScreen +Polarity Logo, Center Positive +Logo Polarity Center Positive +0 +0 +0 +Symbol +Polarity_Center_Positive_12mm_SilkScreen +Polarity Logo, Center Positive +Logo Polarity Center Positive +0 +0 +0 +Symbol +Polarity_Center_Positive_20mm_SilkScreen +Polarity Logo, Center Positive +Logo Polarity Center Positive +0 +0 +0 +Symbol +Polarity_Center_Positive_30mm_SilkScreen +Polarity Logo, Center Positive +Logo Polarity Center Positive +0 +0 +0 +Symbol +Polarity_Center_Positive_40mm_SilkScreen +Polarity Logo, Center Positive +Logo Polarity Center Positive +0 +0 +0 +Symbol +RoHS-Logo_6mm_SilkScreen +Restriction of Hazardous Substances Directive Logo +Logo RoHS +0 +0 +0 +Symbol +RoHS-Logo_8mm_SilkScreen +Restriction of Hazardous Substances Directive Logo +Logo RoHS +0 +0 +0 +Symbol +RoHS-Logo_12mm_SilkScreen +Restriction of Hazardous Substances Directive Logo +Logo RoHS +0 +0 +0 +Symbol +RoHS-Logo_20mm_SilkScreen +Restriction of Hazardous Substances Directive Logo +Logo RoHS +0 +0 +0 +Symbol +RoHS-Logo_30mm_SilkScreen +Restriction of Hazardous Substances Directive Logo +Logo RoHS +0 +0 +0 +Symbol +RoHS-Logo_40mm_SilkScreen +Restriction of Hazardous Substances Directive Logo +Logo RoHS +0 +0 +0 +Symbol +Symbol_Attention_CopperTop_Big +Symbol, Attention, Copper Top, Big, +Symbol, Attention, Copper Top, Big, +0 +0 +0 +Symbol +Symbol_Attention_CopperTop_Small +Symbol, Attention, Copper Top, Small, +Symbol, Attention, Copper Top, Small, +0 +0 +0 +Symbol +Symbol_Barrel_Polarity +Barrel connector polarity indicator +barrel polarity +0 +0 +0 +Symbol +Symbol_CC-Attribution_CopperTop_Big +Symbol, CC-Attribution, Copper Top, Big, +Symbol, CC-Attribution, Copper Top, Big, +0 +0 +0 +Symbol +Symbol_CC-Attribution_CopperTop_Small +Symbol, CC-Share Alike, Copper Top, Small, +Symbol, CC-Share Alike, Copper Top, Small, +0 +0 +0 +Symbol +Symbol_CC-Noncommercial_CopperTop_Big +Symbol, CC-Noncommercial, Copper Top, Big, +Symbol, CC-Noncommercial, Copper Top, Big, +0 +0 +0 +Symbol +Symbol_CC-Noncommercial_CopperTop_Small +Symbol, CC-Noncommercial Alike, Copper Top, Small, +Symbol, CC-Noncommercial Alike, Copper Top, Small, +0 +0 +0 +Symbol +Symbol_CC-PublicDomain_CopperTop_Big +Symbol, CC-PublicDomain, Copper Top, Big, +Symbol, CC-PublicDomain, Copper Top, Big, +0 +0 +0 +Symbol +Symbol_CC-PublicDomain_CopperTop_Small +Symbol, CC-Public Domain, Copper Top, Small, +Symbol, CC-Public Domain, Copper Top, Small, +0 +0 +0 +Symbol +Symbol_CC-PublicDomain_SilkScreenTop_Big +Symbol, CC-PublicDomain, SilkScreen Top, Big, +Symbol, CC-PublicDomain, SilkScreen Top, Big, +0 +0 +0 +Symbol +Symbol_CC-ShareAlike_CopperTop_Big +Symbol, CC-Share Alike, Copper Top, Big, +Symbol, CC-Share Alike, Copper Top, Big, +0 +0 +0 +Symbol +Symbol_CC-ShareAlike_CopperTop_Small +Symbol, CC-Share Alike, Copper Top, Small, +Symbol, CC-Share Alike, Copper Top, Small, +0 +0 +0 +Symbol +Symbol_CreativeCommonsPublicDomain_CopperTop_Small +Symbol, Creative Commons Public Domain, CopperTop, Small, +Symbol, Creative Commons Public Domain, CopperTop, Small, +0 +0 +0 +Symbol +Symbol_CreativeCommonsPublicDomain_SilkScreenTop_Small +Symbol, Creative Commons Public Domain, SilkScreenTop, Small, +Symbol, Creative Commons Public Domain, SilkScreen Top, Small, +0 +0 +0 +Symbol +Symbol_CreativeCommons_CopperTop_Type1_Big +Symbol, Creative Commons, CopperTop, Type 1, Big, +Symbol, Creative Commons, CopperTop, Type 1, Big, +0 +0 +0 +Symbol +Symbol_CreativeCommons_CopperTop_Type2_Big +Symbol, Creative Commons, CopperTop, Type 2, Big, +Symbol, Creative Commons, CopperTop, Type 2, Big, +0 +0 +0 +Symbol +Symbol_CreativeCommons_CopperTop_Type2_Small +Symbol, Creative Commons, CopperTop, Type 2, Small, +Symbol, Creative Commons, CopperTop, Type 2, Small, +0 +0 +0 +Symbol +Symbol_CreativeCommons_SilkScreenTop_Type2_Big +Symbol, Creative Commons, SilkScreen Top, Type 2, Big, +Symbol, Creative Commons, SilkScreen Top, Type 2, Big, +0 +0 +0 +Symbol +Symbol_Danger_CopperTop_Big +Symbol, Danger, CopperTop, Big, +Symbol, Danger, CopperTop, Big, +0 +0 +0 +Symbol +Symbol_Danger_CopperTop_Small +Symbol, Danger, Copper Top, Small, +Symbol, Danger, Copper Top, Small, +0 +0 +0 +Symbol +Symbol_ESD-Logo-Text_CopperTop + + +0 +0 +0 +Symbol +Symbol_ESD-Logo_CopperTop +ESD-Logo, similar JEDEC-14, without text, ohne Text, Copper Top, +ESD-Logo, similar JEDEC-14, without text, ohne Text, Copper Top, +0 +0 +0 +Symbol +Symbol_GNU-GPL_CopperTop_Big +Symbol, GNU-GPL, Copper Top, Big, +Symbol, GNU-GPL, Copper Top, Big, +0 +0 +0 +Symbol +Symbol_GNU-GPL_CopperTop_Small +Symbol, GNU-GPL, Copper Top, Small, +Symbol, GNU-GPL, Copper Top, Small, +0 +0 +0 +Symbol +Symbol_GNU-Logo_CopperTop +GNU-Logo, GNU-Head, GNU-Kopf, Copper Top, +GNU-Logo, GNU-Head, GNU-Kopf, Copper Top, +0 +0 +0 +Symbol +Symbol_GNU-Logo_SilkscreenTop +GNU-Logo, GNU-Head, GNU-Kopf, Silkscreen, +GNU-Logo, GNU-Head, GNU-Kopf, Silkscreen, +0 +0 +0 +Symbol +Symbol_HighVoltage_Type1_CopperTop_Big +Symbol, HighVoltage, Type1, Copper Top, Big, +Symbol, HighVoltage, Type1, Copper Top, Big, +0 +0 +0 +Symbol +Symbol_HighVoltage_Type2_CopperTop_Big +Symbol, HighVoltage, Type2, Copper Top, Big, +Symbol, HighVoltage, Type2, Copper Top, Big, +0 +0 +0 +Symbol +Symbol_HighVoltage_Type2_CopperTop_VerySmall +Symbol, High Voltage, Type 2, Copper Top, Very Small, +Symbol, High Voltage, Type 2, Copper Top, Very Small, +0 +0 +0 +Symbol +Symbol_Highvoltage_Type1_CopperTop_Small +Symbol, Highvoltage, Type 1, Copper Top, Small, +Symbol, Highvoltage, Type 1, Copper Top, Small, +0 +0 +0 +Symbol +Symbol_Highvoltage_Type2_CopperTop_Small +Symbol, Highvoltage, Type 2, Copper Top, Small, +Symbol, Highvoltage, Type 2, Copper Top, Small, +0 +0 +0 +Symbol +UKCA-Logo_6x6mm_SilkScreen +UKCA marking +Logo UKCA marking +0 +0 +0 +Symbol +UKCA-Logo_8x8mm_SilkScreen +UKCA marking +Logo UKCA marking +0 +0 +0 +Symbol +UKCA-Logo_12x12mm_SilkScreen +UKCA marking +Logo UKCA marking +0 +0 +0 +Symbol +UKCA-Logo_20x20mm_SilkScreen +UKCA marking +Logo UKCA marking +0 +0 +0 +Symbol +UKCA-Logo_30x30mm_SilkScreen +UKCA marking +Logo UKCA marking +0 +0 +0 +Symbol +UKCA-Logo_40x40mm_SilkScreen +UKCA marking +Logo UKCA marking +0 +0 +0 +Symbol +WEEE-Logo_4.2x6mm_SilkScreen +Waste Electrical and Electronic Equipment Directive +Logo WEEE +0 +0 +0 +Symbol +WEEE-Logo_5.6x8mm_SilkScreen +Waste Electrical and Electronic Equipment Directive +Logo WEEE +0 +0 +0 +Symbol +WEEE-Logo_8.4x12mm_SilkScreen +Waste Electrical and Electronic Equipment Directive +Logo WEEE +0 +0 +0 +Symbol +WEEE-Logo_14x20mm_SilkScreen +Waste Electrical and Electronic Equipment Directive +Logo WEEE +0 +0 +0 +Symbol +WEEE-Logo_21x30mm_SilkScreen +Waste Electrical and Electronic Equipment Directive +Logo WEEE +0 +0 +0 +Symbol +WEEE-Logo_28.1x40mm_SilkScreen +Waste Electrical and Electronic Equipment Directive +Logo WEEE +0 +0 +0 +TerminalBlock +TerminalBlock_Altech_AK300-2_P5.00mm +Altech AK300 terminal block, pitch 5.0mm, 45 degree angled, see http://www.mouser.com/ds/2/16/PCBMETRC-24178.pdf +Altech AK300 terminal block pitch 5.0mm +0 +2 +2 +TerminalBlock +TerminalBlock_Altech_AK300-3_P5.00mm +Altech AK300 terminal block, pitch 5.0mm, 45 degree angled, see http://www.mouser.com/ds/2/16/PCBMETRC-24178.pdf +Altech AK300 terminal block pitch 5.0mm +0 +3 +3 +TerminalBlock +TerminalBlock_Altech_AK300-4_P5.00mm +Altech AK300 terminal block, pitch 5.0mm, 45 degree angled, see http://www.mouser.com/ds/2/16/PCBMETRC-24178.pdf +Altech AK300 terminal block pitch 5.0mm +0 +4 +4 +TerminalBlock +TerminalBlock_Wuerth_691311400102_P7.62mm +https://katalog.we-online.de/em/datasheet/6913114001xx.pdf +Wuerth WR-TBL Series 3114 terminal block pitch 7.62mm +0 +2 +2 +TerminalBlock +TerminalBlock_bornier-2_P5.08mm +simple 2-pin terminal block, pitch 5.08mm, revamped version of bornier2 +terminal block bornier2 +0 +2 +2 +TerminalBlock +TerminalBlock_bornier-3_P5.08mm +simple 3-pin terminal block, pitch 5.08mm, revamped version of bornier3 +terminal block bornier3 +0 +3 +3 +TerminalBlock +TerminalBlock_bornier-4_P5.08mm +simple 4-pin terminal block, pitch 5.08mm, revamped version of bornier4 +terminal block bornier4 +0 +4 +4 +TerminalBlock +TerminalBlock_bornier-5_P5.08mm +simple 5-pin terminal block, pitch 5.08mm, revamped version of bornier5 +terminal block bornier5 +0 +5 +5 +TerminalBlock +TerminalBlock_bornier-6_P5.08mm +simple 6pin terminal block, pitch 5.08mm, revamped version of bornier6 +terminal block bornier6 +0 +6 +6 +TerminalBlock_4Ucon +TerminalBlock_4Ucon_1x02_P3.50mm_Horizontal +Terminal Block 4Ucon ItemNo. 19963, 2 pins, pitch 3.5mm, size 7.7x7mm^2, drill diamater 1.2mm, pad diameter 2.4mm, see http://www.4uconnector.com/online/object/4udrawing/19963.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon +THT Terminal Block 4Ucon ItemNo. 19963 pitch 3.5mm size 7.7x7mm^2 drill 1.2mm pad 2.4mm +0 +2 +2 +TerminalBlock_4Ucon +TerminalBlock_4Ucon_1x02_P3.50mm_Vertical +Terminal Block 4Ucon ItemNo. 10693, vertical (cable from top), 2 pins, pitch 3.5mm, size 8x8.3mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.4uconnector.com/online/object/4udrawing/10693.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon +THT Terminal Block 4Ucon ItemNo. 10693 vertical pitch 3.5mm size 8x8.3mm^2 drill 1.3mm pad 2.6mm +0 +2 +2 +TerminalBlock_4Ucon +TerminalBlock_4Ucon_1x03_P3.50mm_Horizontal +Terminal Block 4Ucon ItemNo. 20193, 3 pins, pitch 3.5mm, size 11.2x7mm^2, drill diamater 1.2mm, pad diameter 2.4mm, see http://www.4uconnector.com/online/object/4udrawing/20193.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon +THT Terminal Block 4Ucon ItemNo. 20193 pitch 3.5mm size 11.2x7mm^2 drill 1.2mm pad 2.4mm +0 +3 +3 +TerminalBlock_4Ucon +TerminalBlock_4Ucon_1x03_P3.50mm_Vertical +Terminal Block 4Ucon ItemNo. 10694, vertical (cable from top), 3 pins, pitch 3.5mm, size 11.5x8.3mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.4uconnector.com/online/object/4udrawing/10694.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon +THT Terminal Block 4Ucon ItemNo. 10694 vertical pitch 3.5mm size 11.5x8.3mm^2 drill 1.3mm pad 2.6mm +0 +3 +3 +TerminalBlock_4Ucon +TerminalBlock_4Ucon_1x04_P3.50mm_Horizontal +Terminal Block 4Ucon ItemNo. 20001, 4 pins, pitch 3.5mm, size 14.7x7mm^2, drill diamater 1.2mm, pad diameter 2.4mm, see http://www.4uconnector.com/online/object/4udrawing/20001.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon +THT Terminal Block 4Ucon ItemNo. 20001 pitch 3.5mm size 14.7x7mm^2 drill 1.2mm pad 2.4mm +0 +4 +4 +TerminalBlock_4Ucon +TerminalBlock_4Ucon_1x04_P3.50mm_Vertical +Terminal Block 4Ucon ItemNo. 10695, vertical (cable from top), 4 pins, pitch 3.5mm, size 15x8.3mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.4uconnector.com/online/object/4udrawing/10695.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon +THT Terminal Block 4Ucon ItemNo. 10695 vertical pitch 3.5mm size 15x8.3mm^2 drill 1.3mm pad 2.6mm +0 +4 +4 +TerminalBlock_4Ucon +TerminalBlock_4Ucon_1x05_P3.50mm_Horizontal +Terminal Block 4Ucon ItemNo. 20223, 5 pins, pitch 3.5mm, size 18.2x7mm^2, drill diamater 1.2mm, pad diameter 2.4mm, see http://www.4uconnector.com/online/object/4udrawing/20223.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon +THT Terminal Block 4Ucon ItemNo. 20223 pitch 3.5mm size 18.2x7mm^2 drill 1.2mm pad 2.4mm +0 +5 +5 +TerminalBlock_4Ucon +TerminalBlock_4Ucon_1x05_P3.50mm_Vertical +Terminal Block 4Ucon ItemNo. 10696, vertical (cable from top), 5 pins, pitch 3.5mm, size 18.5x8.3mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.4uconnector.com/online/object/4udrawing/10696.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon +THT Terminal Block 4Ucon ItemNo. 10696 vertical pitch 3.5mm size 18.5x8.3mm^2 drill 1.3mm pad 2.6mm +0 +5 +5 +TerminalBlock_4Ucon +TerminalBlock_4Ucon_1x06_P3.50mm_Horizontal +Terminal Block 4Ucon ItemNo. 19964, 6 pins, pitch 3.5mm, size 21.7x7mm^2, drill diamater 1.2mm, pad diameter 2.4mm, see http://www.4uconnector.com/online/object/4udrawing/19964.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon +THT Terminal Block 4Ucon ItemNo. 19964 pitch 3.5mm size 21.7x7mm^2 drill 1.2mm pad 2.4mm +0 +6 +6 +TerminalBlock_4Ucon +TerminalBlock_4Ucon_1x06_P3.50mm_Vertical +Terminal Block 4Ucon ItemNo. 10697, vertical (cable from top), 6 pins, pitch 3.5mm, size 22x8.3mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.4uconnector.com/online/object/4udrawing/10697.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon +THT Terminal Block 4Ucon ItemNo. 10697 vertical pitch 3.5mm size 22x8.3mm^2 drill 1.3mm pad 2.6mm +0 +6 +6 +TerminalBlock_4Ucon +TerminalBlock_4Ucon_1x07_P3.50mm_Horizontal +Terminal Block 4Ucon ItemNo. 10684, 7 pins, pitch 3.5mm, size 25.2x7mm^2, drill diamater 1.2mm, pad diameter 2.4mm, see http://www.4uconnector.com/online/object/4udrawing/10684.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon +THT Terminal Block 4Ucon ItemNo. 10684 pitch 3.5mm size 25.2x7mm^2 drill 1.2mm pad 2.4mm +0 +7 +7 +TerminalBlock_4Ucon +TerminalBlock_4Ucon_1x07_P3.50mm_Vertical +Terminal Block 4Ucon ItemNo. 10698, vertical (cable from top), 7 pins, pitch 3.5mm, size 25.5x8.3mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.4uconnector.com/online/object/4udrawing/10698.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon +THT Terminal Block 4Ucon ItemNo. 10698 vertical pitch 3.5mm size 25.5x8.3mm^2 drill 1.3mm pad 2.6mm +0 +7 +7 +TerminalBlock_4Ucon +TerminalBlock_4Ucon_1x08_P3.50mm_Horizontal +Terminal Block 4Ucon ItemNo. 19965, 8 pins, pitch 3.5mm, size 28.7x7mm^2, drill diamater 1.2mm, pad diameter 2.4mm, see http://www.4uconnector.com/online/object/4udrawing/19965.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon +THT Terminal Block 4Ucon ItemNo. 19965 pitch 3.5mm size 28.7x7mm^2 drill 1.2mm pad 2.4mm +0 +8 +8 +TerminalBlock_4Ucon +TerminalBlock_4Ucon_1x08_P3.50mm_Vertical +Terminal Block 4Ucon ItemNo. 10699, vertical (cable from top), 8 pins, pitch 3.5mm, size 29x8.3mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.4uconnector.com/online/object/4udrawing/10699.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon +THT Terminal Block 4Ucon ItemNo. 10699 vertical pitch 3.5mm size 29x8.3mm^2 drill 1.3mm pad 2.6mm +0 +8 +8 +TerminalBlock_4Ucon +TerminalBlock_4Ucon_1x09_P3.50mm_Horizontal +Terminal Block 4Ucon ItemNo. 10686, 9 pins, pitch 3.5mm, size 32.2x7mm^2, drill diamater 1.2mm, pad diameter 2.4mm, see http://www.4uconnector.com/online/object/4udrawing/10686.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon +THT Terminal Block 4Ucon ItemNo. 10686 pitch 3.5mm size 32.2x7mm^2 drill 1.2mm pad 2.4mm +0 +9 +9 +TerminalBlock_4Ucon +TerminalBlock_4Ucon_1x09_P3.50mm_Vertical +Terminal Block 4Ucon ItemNo. 10700, vertical (cable from top), 9 pins, pitch 3.5mm, size 32.5x8.3mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.4uconnector.com/online/object/4udrawing/10700.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon +THT Terminal Block 4Ucon ItemNo. 10700 vertical pitch 3.5mm size 32.5x8.3mm^2 drill 1.3mm pad 2.6mm +0 +9 +9 +TerminalBlock_4Ucon +TerminalBlock_4Ucon_1x10_P3.50mm_Horizontal +Terminal Block 4Ucon ItemNo. 10687, 10 pins, pitch 3.5mm, size 35.7x7mm^2, drill diamater 1.2mm, pad diameter 2.4mm, see http://www.4uconnector.com/online/object/4udrawing/10687.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon +THT Terminal Block 4Ucon ItemNo. 10687 pitch 3.5mm size 35.7x7mm^2 drill 1.2mm pad 2.4mm +0 +10 +10 +TerminalBlock_4Ucon +TerminalBlock_4Ucon_1x10_P3.50mm_Vertical +Terminal Block 4Ucon ItemNo. 10701, vertical (cable from top), 10 pins, pitch 3.5mm, size 36x8.3mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.4uconnector.com/online/object/4udrawing/10701.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon +THT Terminal Block 4Ucon ItemNo. 10701 vertical pitch 3.5mm size 36x8.3mm^2 drill 1.3mm pad 2.6mm +0 +10 +10 +TerminalBlock_4Ucon +TerminalBlock_4Ucon_1x11_P3.50mm_Horizontal +Terminal Block 4Ucon ItemNo. 10688, 11 pins, pitch 3.5mm, size 39.2x7mm^2, drill diamater 1.2mm, pad diameter 2.4mm, see http://www.4uconnector.com/online/object/4udrawing/10688.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon +THT Terminal Block 4Ucon ItemNo. 10688 pitch 3.5mm size 39.2x7mm^2 drill 1.2mm pad 2.4mm +0 +11 +11 +TerminalBlock_4Ucon +TerminalBlock_4Ucon_1x11_P3.50mm_Vertical +Terminal Block 4Ucon ItemNo. 10702, vertical (cable from top), 11 pins, pitch 3.5mm, size 39.5x8.3mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.4uconnector.com/online/object/4udrawing/10702.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon +THT Terminal Block 4Ucon ItemNo. 10702 vertical pitch 3.5mm size 39.5x8.3mm^2 drill 1.3mm pad 2.6mm +0 +11 +11 +TerminalBlock_4Ucon +TerminalBlock_4Ucon_1x12_P3.50mm_Horizontal +Terminal Block 4Ucon ItemNo. 10689, 12 pins, pitch 3.5mm, size 42.7x7mm^2, drill diamater 1.2mm, pad diameter 2.4mm, see http://www.4uconnector.com/online/object/4udrawing/10689.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon +THT Terminal Block 4Ucon ItemNo. 10689 pitch 3.5mm size 42.7x7mm^2 drill 1.2mm pad 2.4mm +0 +12 +12 +TerminalBlock_4Ucon +TerminalBlock_4Ucon_1x12_P3.50mm_Vertical +Terminal Block 4Ucon ItemNo. 10703, vertical (cable from top), 12 pins, pitch 3.5mm, size 43x8.3mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.4uconnector.com/online/object/4udrawing/10703.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon +THT Terminal Block 4Ucon ItemNo. 10703 vertical pitch 3.5mm size 43x8.3mm^2 drill 1.3mm pad 2.6mm +0 +12 +12 +TerminalBlock_4Ucon +TerminalBlock_4Ucon_1x13_P3.50mm_Horizontal +Terminal Block 4Ucon ItemNo. 10690, 13 pins, pitch 3.5mm, size 46.2x7mm^2, drill diamater 1.2mm, pad diameter 2.4mm, see http://www.4uconnector.com/online/object/4udrawing/10690.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon +THT Terminal Block 4Ucon ItemNo. 10690 pitch 3.5mm size 46.2x7mm^2 drill 1.2mm pad 2.4mm +0 +13 +13 +TerminalBlock_4Ucon +TerminalBlock_4Ucon_1x13_P3.50mm_Vertical +Terminal Block 4Ucon ItemNo. 10704, vertical (cable from top), 13 pins, pitch 3.5mm, size 46.5x8.3mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.4uconnector.com/online/object/4udrawing/10704.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon +THT Terminal Block 4Ucon ItemNo. 10704 vertical pitch 3.5mm size 46.5x8.3mm^2 drill 1.3mm pad 2.6mm +0 +13 +13 +TerminalBlock_4Ucon +TerminalBlock_4Ucon_1x14_P3.50mm_Horizontal +Terminal Block 4Ucon ItemNo. 10691, 14 pins, pitch 3.5mm, size 49.7x7mm^2, drill diamater 1.2mm, pad diameter 2.4mm, see http://www.4uconnector.com/online/object/4udrawing/10691.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon +THT Terminal Block 4Ucon ItemNo. 10691 pitch 3.5mm size 49.7x7mm^2 drill 1.2mm pad 2.4mm +0 +14 +14 +TerminalBlock_4Ucon +TerminalBlock_4Ucon_1x14_P3.50mm_Vertical +Terminal Block 4Ucon ItemNo. 10705, vertical (cable from top), 14 pins, pitch 3.5mm, size 50x8.3mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.4uconnector.com/online/object/4udrawing/10705.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon +THT Terminal Block 4Ucon ItemNo. 10705 vertical pitch 3.5mm size 50x8.3mm^2 drill 1.3mm pad 2.6mm +0 +14 +14 +TerminalBlock_4Ucon +TerminalBlock_4Ucon_1x15_P3.50mm_Horizontal +Terminal Block 4Ucon ItemNo. 10692, 15 pins, pitch 3.5mm, size 53.2x7mm^2, drill diamater 1.2mm, pad diameter 2.4mm, see http://www.4uconnector.com/online/object/4udrawing/10692.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon +THT Terminal Block 4Ucon ItemNo. 10692 pitch 3.5mm size 53.2x7mm^2 drill 1.2mm pad 2.4mm +0 +15 +15 +TerminalBlock_4Ucon +TerminalBlock_4Ucon_1x15_P3.50mm_Vertical +Terminal Block 4Ucon ItemNo. 10706, vertical (cable from top), 15 pins, pitch 3.5mm, size 53.5x8.3mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.4uconnector.com/online/object/4udrawing/10706.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon +THT Terminal Block 4Ucon ItemNo. 10706 vertical pitch 3.5mm size 53.5x8.3mm^2 drill 1.3mm pad 2.6mm +0 +15 +15 +TerminalBlock_Altech +Altech_AK300_1x02_P5.00mm_45-Degree +Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF) +Altech AK300 serie connector +0 +2 +2 +TerminalBlock_Altech +Altech_AK300_1x03_P5.00mm_45-Degree +Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF) +Altech AK300 serie connector +0 +3 +3 +TerminalBlock_Altech +Altech_AK300_1x04_P5.00mm_45-Degree +Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF) +Altech AK300 serie connector +0 +4 +4 +TerminalBlock_Altech +Altech_AK300_1x05_P5.00mm_45-Degree +Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF) +Altech AK300 serie connector +0 +5 +5 +TerminalBlock_Altech +Altech_AK300_1x06_P5.00mm_45-Degree +Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF) +Altech AK300 serie connector +0 +6 +6 +TerminalBlock_Altech +Altech_AK300_1x07_P5.00mm_45-Degree +Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF) +Altech AK300 serie connector +0 +7 +7 +TerminalBlock_Altech +Altech_AK300_1x08_P5.00mm_45-Degree +Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF) +Altech AK300 serie connector +0 +8 +8 +TerminalBlock_Altech +Altech_AK300_1x09_P5.00mm_45-Degree +Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF) +Altech AK300 serie connector +0 +9 +9 +TerminalBlock_Altech +Altech_AK300_1x10_P5.00mm_45-Degree +Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF) +Altech AK300 serie connector +0 +10 +10 +TerminalBlock_Altech +Altech_AK300_1x11_P5.00mm_45-Degree +Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF) +Altech AK300 serie connector +0 +11 +11 +TerminalBlock_Altech +Altech_AK300_1x12_P5.00mm_45-Degree +Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF) +Altech AK300 serie connector +0 +12 +12 +TerminalBlock_Altech +Altech_AK300_1x13_P5.00mm_45-Degree +Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF) +Altech AK300 serie connector +0 +13 +13 +TerminalBlock_Altech +Altech_AK300_1x14_P5.00mm_45-Degree +Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF) +Altech AK300 serie connector +0 +14 +14 +TerminalBlock_Altech +Altech_AK300_1x15_P5.00mm_45-Degree +Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF) +Altech AK300 serie connector +0 +15 +15 +TerminalBlock_Altech +Altech_AK300_1x16_P5.00mm_45-Degree +Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF) +Altech AK300 serie connector +0 +16 +16 +TerminalBlock_Altech +Altech_AK300_1x17_P5.00mm_45-Degree +Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF) +Altech AK300 serie connector +0 +17 +17 +TerminalBlock_Altech +Altech_AK300_1x18_P5.00mm_45-Degree +Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF) +Altech AK300 serie connector +0 +18 +18 +TerminalBlock_Altech +Altech_AK300_1x19_P5.00mm_45-Degree +Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF) +Altech AK300 serie connector +0 +19 +19 +TerminalBlock_Altech +Altech_AK300_1x20_P5.00mm_45-Degree +Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF) +Altech AK300 serie connector +0 +20 +20 +TerminalBlock_Altech +Altech_AK300_1x21_P5.00mm_45-Degree +Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF) +Altech AK300 serie connector +0 +21 +21 +TerminalBlock_Altech +Altech_AK300_1x22_P5.00mm_45-Degree +Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF) +Altech AK300 serie connector +0 +22 +22 +TerminalBlock_Altech +Altech_AK300_1x23_P5.00mm_45-Degree +Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF) +Altech AK300 serie connector +0 +23 +23 +TerminalBlock_Altech +Altech_AK300_1x24_P5.00mm_45-Degree +Altech AK300 serie terminal block (Script generated with StandardBox.py) (http://www.altechcorp.com/PDFS/PCBMETRC.PDF) +Altech AK300 serie connector +0 +24 +24 +TerminalBlock_Dinkle +TerminalBlock_Dinkle_DT-55-B01X-02_P10.00mm +Dinkle DT-55-B01X Terminal Block pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX +Dinkle DT-55-B01X Terminal Block pitch 10.00mm +0 +2 +2 +TerminalBlock_Dinkle +TerminalBlock_Dinkle_DT-55-B01X-03_P10.00mm +Dinkle DT-55-B01X Terminal Block pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX +Dinkle DT-55-B01X Terminal Block pitch 10.00mm +0 +3 +3 +TerminalBlock_Dinkle +TerminalBlock_Dinkle_DT-55-B01X-04_P10.00mm +Dinkle DT-55-B01X Terminal Block pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX +Dinkle DT-55-B01X Terminal Block pitch 10.00mm +0 +4 +4 +TerminalBlock_Dinkle +TerminalBlock_Dinkle_DT-55-B01X-05_P10.00mm +Dinkle DT-55-B01X Terminal Block pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX +Dinkle DT-55-B01X Terminal Block pitch 10.00mm +0 +5 +5 +TerminalBlock_Dinkle +TerminalBlock_Dinkle_DT-55-B01X-06_P10.00mm +Dinkle DT-55-B01X Terminal Block pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX +Dinkle DT-55-B01X Terminal Block pitch 10.00mm +0 +6 +6 +TerminalBlock_Dinkle +TerminalBlock_Dinkle_DT-55-B01X-07_P10.00mm +Dinkle DT-55-B01X Terminal Block pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX +Dinkle DT-55-B01X Terminal Block pitch 10.00mm +0 +7 +7 +TerminalBlock_Dinkle +TerminalBlock_Dinkle_DT-55-B01X-08_P10.00mm +Dinkle DT-55-B01X Terminal Block pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX +Dinkle DT-55-B01X Terminal Block pitch 10.00mm +0 +8 +8 +TerminalBlock_Dinkle +TerminalBlock_Dinkle_DT-55-B01X-09_P10.00mm +Dinkle DT-55-B01X Terminal Block pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX +Dinkle DT-55-B01X Terminal Block pitch 10.00mm +0 +9 +9 +TerminalBlock_Dinkle +TerminalBlock_Dinkle_DT-55-B01X-10_P10.00mm +Dinkle DT-55-B01X Terminal Block pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX +Dinkle DT-55-B01X Terminal Block pitch 10.00mm +0 +10 +10 +TerminalBlock_Dinkle +TerminalBlock_Dinkle_DT-55-B01X-11_P10.00mm +Dinkle DT-55-B01X Terminal Block pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX +Dinkle DT-55-B01X Terminal Block pitch 10.00mm +0 +11 +11 +TerminalBlock_Dinkle +TerminalBlock_Dinkle_DT-55-B01X-12_P10.00mm +Dinkle DT-55-B01X Terminal Block pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX +Dinkle DT-55-B01X Terminal Block pitch 10.00mm +0 +12 +12 +TerminalBlock_Dinkle +TerminalBlock_Dinkle_DT-55-B01X-13_P10.00mm +Dinkle DT-55-B01X Terminal Block pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX +Dinkle DT-55-B01X Terminal Block pitch 10.00mm +0 +13 +13 +TerminalBlock_Dinkle +TerminalBlock_Dinkle_DT-55-B01X-14_P10.00mm +Dinkle DT-55-B01X Terminal Block pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX +Dinkle DT-55-B01X Terminal Block pitch 10.00mm +0 +14 +14 +TerminalBlock_Dinkle +TerminalBlock_Dinkle_DT-55-B01X-15_P10.00mm +Dinkle DT-55-B01X Terminal Block pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX +Dinkle DT-55-B01X Terminal Block pitch 10.00mm +0 +15 +15 +TerminalBlock_Dinkle +TerminalBlock_Dinkle_DT-55-B01X-16_P10.00mm +Dinkle DT-55-B01X Terminal Block pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX +Dinkle DT-55-B01X Terminal Block pitch 10.00mm +0 +16 +16 +TerminalBlock_Dinkle +TerminalBlock_Dinkle_DT-55-B01X-17_P10.00mm +Dinkle DT-55-B01X Terminal Block pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX +Dinkle DT-55-B01X Terminal Block pitch 10.00mm +0 +17 +17 +TerminalBlock_Dinkle +TerminalBlock_Dinkle_DT-55-B01X-18_P10.00mm +Dinkle DT-55-B01X Terminal Block pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX +Dinkle DT-55-B01X Terminal Block pitch 10.00mm +0 +18 +18 +TerminalBlock_Dinkle +TerminalBlock_Dinkle_DT-55-B01X-19_P10.00mm +Dinkle DT-55-B01X Terminal Block pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX +Dinkle DT-55-B01X Terminal Block pitch 10.00mm +0 +19 +19 +TerminalBlock_Dinkle +TerminalBlock_Dinkle_DT-55-B01X-20_P10.00mm +Dinkle DT-55-B01X Terminal Block pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX +Dinkle DT-55-B01X Terminal Block pitch 10.00mm +0 +20 +20 +TerminalBlock_Dinkle +TerminalBlock_Dinkle_DT-55-B01X-21_P10.00mm +Dinkle DT-55-B01X Terminal Block pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX +Dinkle DT-55-B01X Terminal Block pitch 10.00mm +0 +21 +21 +TerminalBlock_Dinkle +TerminalBlock_Dinkle_DT-55-B01X-22_P10.00mm +Dinkle DT-55-B01X Terminal Block pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX +Dinkle DT-55-B01X Terminal Block pitch 10.00mm +0 +22 +22 +TerminalBlock_Dinkle +TerminalBlock_Dinkle_DT-55-B01X-23_P10.00mm +Dinkle DT-55-B01X Terminal Block pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX +Dinkle DT-55-B01X Terminal Block pitch 10.00mm +0 +23 +23 +TerminalBlock_Dinkle +TerminalBlock_Dinkle_DT-55-B01X-24_P10.00mm +Dinkle DT-55-B01X Terminal Block pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX +Dinkle DT-55-B01X Terminal Block pitch 10.00mm +0 +24 +24 +TerminalBlock_Dinkle +TerminalBlock_Dinkle_DT-55-B01X-25_P10.00mm +Dinkle DT-55-B01X Terminal Block pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX +Dinkle DT-55-B01X Terminal Block pitch 10.00mm +0 +25 +25 +TerminalBlock_Dinkle +TerminalBlock_Dinkle_DT-55-B01X-26_P10.00mm +Dinkle DT-55-B01X Terminal Block pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX +Dinkle DT-55-B01X Terminal Block pitch 10.00mm +0 +26 +26 +TerminalBlock_Dinkle +TerminalBlock_Dinkle_DT-55-B01X-27_P10.00mm +Dinkle DT-55-B01X Terminal Block pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX +Dinkle DT-55-B01X Terminal Block pitch 10.00mm +0 +27 +27 +TerminalBlock_Dinkle +TerminalBlock_Dinkle_DT-55-B01X-28_P10.00mm +Dinkle DT-55-B01X Terminal Block pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX +Dinkle DT-55-B01X Terminal Block pitch 10.00mm +0 +28 +28 +TerminalBlock_Dinkle +TerminalBlock_Dinkle_DT-55-B01X-29_P10.00mm +Dinkle DT-55-B01X Terminal Block pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX +Dinkle DT-55-B01X Terminal Block pitch 10.00mm +0 +29 +29 +TerminalBlock_Dinkle +TerminalBlock_Dinkle_DT-55-B01X-30_P10.00mm +Dinkle DT-55-B01X Terminal Block pitch 10.00mm https://www.dinkle.com/en/terminal/DT-55-B01W-XX +Dinkle DT-55-B01X Terminal Block pitch 10.00mm +0 +30 +30 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_360271_1x01_Horizontal_ScrewM3.0_Boxed +single screw terminal block Metz Connect 360271, block size 9x7.3mm^2, drill diamater 1.5mm, 1 pads, pad diameter 3mm, see http://www.metz-connect.com/de/system/files/METZ_CONNECT_U_Contact_Katalog_Anschlusssysteme_fuer_Leiterplatten_DE_31_07_2017_OFF_024803.pdf?language=en page 134, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT single screw terminal block Metz Connect 360271 size 9x7.3mm^2 drill 1.5mm pad 3mm +0 +1 +1 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_360272_1x01_Horizontal_ScrewM2.6 +single screw terminal block Metz Connect 360272, block size 4x4mm^2, drill diamater 1.5mm, 2 pads, pad diameter 3mm, see http://www.metz-connect.com/de/system/files/METZ_CONNECT_U_Contact_Katalog_Anschlusssysteme_fuer_Leiterplatten_DE_31_07_2017_OFF_024803.pdf?language=en page 131, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT single screw terminal block Metz Connect 360272 size 4x4mm^2 drill 1.5mm pad 3mm +0 +2 +1 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_360273_1x01_Horizontal_ScrewM2.6_WireProtection +single screw terminal block Metz Connect 360273, block size 5x4mm^2, drill diamater 1.5mm, 2 pads, pad diameter 3mm, see http://www.metz-connect.com/de/system/files/METZ_CONNECT_U_Contact_Katalog_Anschlusssysteme_fuer_Leiterplatten_DE_31_07_2017_OFF_024803.pdf?language=en page 131, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT single screw terminal block Metz Connect 360273 size 5x4mm^2 drill 1.5mm pad 3mm +0 +2 +1 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_360291_1x01_Horizontal_ScrewM3.0_Boxed +single screw terminal block Metz Connect 360291, block size 9x7.3mm^2, drill diamater 1.5mm, 2 pads, pad diameter 3mm, see http://www.metz-connect.com/de/system/files/METZ_CONNECT_U_Contact_Katalog_Anschlusssysteme_fuer_Leiterplatten_DE_31_07_2017_OFF_024803.pdf?language=en page 133, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT single screw terminal block Metz Connect 360291 size 9x7.3mm^2 drill 1.5mm pad 3mm +0 +2 +1 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_360322_1x01_Horizontal_ScrewM3.0_WireProtection +single screw terminal block Metz Connect 360322, block size 6x4mm^2, drill diamater 1.5mm, 2 pads, pad diameter 3mm, see http://www.metz-connect.com/de/system/files/METZ_CONNECT_U_Contact_Katalog_Anschlusssysteme_fuer_Leiterplatten_DE_31_07_2017_OFF_024803.pdf?language=en page 133, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT single screw terminal block Metz Connect 360322 size 6x4mm^2 drill 1.5mm pad 3mm +0 +2 +1 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_360381_1x01_Horizontal_ScrewM3.0 +single screw terminal block Metz Connect 360381, block size 5x5mm^2, drill diamater 1.5mm, 2 pads, pad diameter 3mm, see http://www.metz-connect.com/de/system/files/METZ_CONNECT_U_Contact_Katalog_Anschlusssysteme_fuer_Leiterplatten_DE_31_07_2017_OFF_024803.pdf?language=en page 133, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT single screw terminal block Metz Connect 360381 size 5x5mm^2 drill 1.5mm pad 3mm +0 +2 +1 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_360410_1x01_Horizontal_ScrewM3.0 +single screw terminal block Metz Connect 360410, block size 5x5mm^2, drill diamater 1.5mm, 2 pads, pad diameter 3mm, see http://www.metz-connect.com/de/system/files/METZ_CONNECT_U_Contact_Katalog_Anschlusssysteme_fuer_Leiterplatten_DE_31_07_2017_OFF_024803.pdf?language=en page 132, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT single screw terminal block Metz Connect 360410 size 5x5mm^2 drill 1.5mm pad 3mm +0 +2 +1 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_360425_1x01_Horizontal_ScrewM4.0_Boxed +single screw terminal block Metz Connect 360425, block size 9x9mm^2, drill diamater 1.6mm, 4 pads, pad diameter 3.2mm, see http://www.metz-connect.com/de/system/files/METZ_CONNECT_U_Contact_Katalog_Anschlusssysteme_fuer_Leiterplatten_DE_31_07_2017_OFF_024803.pdf?language=en page 134, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT single screw terminal block Metz Connect 360425 size 9x9mm^2 drill 1.6mm pad 3.2mm +0 +4 +1 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type011_RT05502HBWC_1x02_P5.00mm_Horizontal +terminal block Metz Connect Type011_RT05502HBWC, 2 pins, pitch 5mm, size 10x10.5mm^2, drill diamater 1.4mm, pad diameter 2.8mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310111_RT055xxHBLC_OFF-022717S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type011_RT05502HBWC pitch 5mm size 10x10.5mm^2 drill 1.4mm pad 2.8mm +0 +2 +2 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type011_RT05503HBWC_1x03_P5.00mm_Horizontal +terminal block Metz Connect Type011_RT05503HBWC, 3 pins, pitch 5mm, size 15x10.5mm^2, drill diamater 1.4mm, pad diameter 2.8mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310111_RT055xxHBLC_OFF-022717S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type011_RT05503HBWC pitch 5mm size 15x10.5mm^2 drill 1.4mm pad 2.8mm +0 +3 +3 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type011_RT05504HBWC_1x04_P5.00mm_Horizontal +terminal block Metz Connect Type011_RT05504HBWC, 4 pins, pitch 5mm, size 20x10.5mm^2, drill diamater 1.4mm, pad diameter 2.8mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310111_RT055xxHBLC_OFF-022717S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type011_RT05504HBWC pitch 5mm size 20x10.5mm^2 drill 1.4mm pad 2.8mm +0 +4 +4 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type011_RT05505HBWC_1x05_P5.00mm_Horizontal +terminal block Metz Connect Type011_RT05505HBWC, 5 pins, pitch 5mm, size 25x10.5mm^2, drill diamater 1.4mm, pad diameter 2.8mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310111_RT055xxHBLC_OFF-022717S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type011_RT05505HBWC pitch 5mm size 25x10.5mm^2 drill 1.4mm pad 2.8mm +0 +5 +5 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type011_RT05506HBWC_1x06_P5.00mm_Horizontal +terminal block Metz Connect Type011_RT05506HBWC, 6 pins, pitch 5mm, size 30x10.5mm^2, drill diamater 1.4mm, pad diameter 2.8mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310111_RT055xxHBLC_OFF-022717S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type011_RT05506HBWC pitch 5mm size 30x10.5mm^2 drill 1.4mm pad 2.8mm +0 +6 +6 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type055_RT01502HDWU_1x02_P5.00mm_Horizontal +terminal block Metz Connect Type055_RT01502HDWU, 2 pins, pitch 5mm, size 10x8mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310551_RT015xxHDWU_OFF-022723S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type055_RT01502HDWU pitch 5mm size 10x8mm^2 drill 1.3mm pad 2.5mm +0 +2 +2 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type055_RT01503HDWU_1x03_P5.00mm_Horizontal +terminal block Metz Connect Type055_RT01503HDWU, 3 pins, pitch 5mm, size 15x8mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310551_RT015xxHDWU_OFF-022723S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type055_RT01503HDWU pitch 5mm size 15x8mm^2 drill 1.3mm pad 2.5mm +0 +3 +3 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type055_RT01504HDWU_1x04_P5.00mm_Horizontal +terminal block Metz Connect Type055_RT01504HDWU, 4 pins, pitch 5mm, size 20x8mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310551_RT015xxHDWU_OFF-022723S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type055_RT01504HDWU pitch 5mm size 20x8mm^2 drill 1.3mm pad 2.5mm +0 +4 +4 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type059_RT06302HBWC_1x02_P3.50mm_Horizontal +terminal block Metz Connect Type059_RT06302HBWC, 2 pins, pitch 3.5mm, size 7x6.5mm^2, drill diamater 1.2mm, pad diameter 2.3mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310591_RT063xxHBWC_OFF-022684T.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type059_RT06302HBWC pitch 3.5mm size 7x6.5mm^2 drill 1.2mm pad 2.3mm +0 +2 +2 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type059_RT06303HBWC_1x03_P3.50mm_Horizontal +terminal block Metz Connect Type059_RT06303HBWC, 3 pins, pitch 3.5mm, size 10.5x6.5mm^2, drill diamater 1.2mm, pad diameter 2.3mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310591_RT063xxHBWC_OFF-022684T.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type059_RT06303HBWC pitch 3.5mm size 10.5x6.5mm^2 drill 1.2mm pad 2.3mm +0 +3 +3 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type059_RT06304HBWC_1x04_P3.50mm_Horizontal +terminal block Metz Connect Type059_RT06304HBWC, 4 pins, pitch 3.5mm, size 14x6.5mm^2, drill diamater 1.2mm, pad diameter 2.3mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310591_RT063xxHBWC_OFF-022684T.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type059_RT06304HBWC pitch 3.5mm size 14x6.5mm^2 drill 1.2mm pad 2.3mm +0 +4 +4 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type059_RT06305HBWC_1x05_P3.50mm_Horizontal +terminal block Metz Connect Type059_RT06305HBWC, 5 pins, pitch 3.5mm, size 17.5x6.5mm^2, drill diamater 1.2mm, pad diameter 2.3mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310591_RT063xxHBWC_OFF-022684T.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type059_RT06305HBWC pitch 3.5mm size 17.5x6.5mm^2 drill 1.2mm pad 2.3mm +0 +5 +5 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type059_RT06306HBWC_1x06_P3.50mm_Horizontal +terminal block Metz Connect Type059_RT06306HBWC, 6 pins, pitch 3.5mm, size 21x6.5mm^2, drill diamater 1.2mm, pad diameter 2.3mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310591_RT063xxHBWC_OFF-022684T.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type059_RT06306HBWC pitch 3.5mm size 21x6.5mm^2 drill 1.2mm pad 2.3mm +0 +6 +6 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type067_RT01902HDWC_1x02_P10.00mm_Horizontal +terminal block Metz Connect Type067_RT01902HDWC, 2 pins, pitch 10mm, size 15.8x8.2mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310671_RT019xxHDWC_OFF-023605N.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type067_RT01902HDWC pitch 10mm size 15.8x8.2mm^2 drill 1.3mm pad 2.6mm +0 +2 +2 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type067_RT01903HDWC_1x03_P10.00mm_Horizontal +terminal block Metz Connect Type067_RT01903HDWC, 3 pins, pitch 10mm, size 25.8x8.2mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310671_RT019xxHDWC_OFF-023605N.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type067_RT01903HDWC pitch 10mm size 25.8x8.2mm^2 drill 1.3mm pad 2.6mm +0 +3 +3 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type067_RT01904HDWC_1x04_P10.00mm_Horizontal +terminal block Metz Connect Type067_RT01904HDWC, 4 pins, pitch 10mm, size 35.8x8.2mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310671_RT019xxHDWC_OFF-023605N.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type067_RT01904HDWC pitch 10mm size 35.8x8.2mm^2 drill 1.3mm pad 2.6mm +0 +4 +4 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type067_RT01905HDWC_1x05_P10.00mm_Horizontal +terminal block Metz Connect Type067_RT01905HDWC, 5 pins, pitch 10mm, size 45.8x8.2mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310671_RT019xxHDWC_OFF-023605N.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type067_RT01905HDWC pitch 10mm size 45.8x8.2mm^2 drill 1.3mm pad 2.6mm +0 +5 +5 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type073_RT02602HBLU_1x02_P5.08mm_Horizontal +terminal block Metz Connect Type073_RT02602HBLU, 2 pins, pitch 5.08mm, size 10.2x11mm^2, drill diamater 1.4mm, pad diameter 2.6mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310731_RT026xxHBLU_OFF-022792U.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type073_RT02602HBLU pitch 5.08mm size 10.2x11mm^2 drill 1.4mm pad 2.6mm +0 +2 +2 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type073_RT02603HBLU_1x03_P5.08mm_Horizontal +terminal block Metz Connect Type073_RT02603HBLU, 3 pins, pitch 5.08mm, size 15.2x11mm^2, drill diamater 1.4mm, pad diameter 2.6mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310731_RT026xxHBLU_OFF-022792U.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type073_RT02603HBLU pitch 5.08mm size 15.2x11mm^2 drill 1.4mm pad 2.6mm +0 +3 +3 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type086_RT03402HBLC_1x02_P3.81mm_Horizontal +terminal block Metz Connect Type086_RT03402HBLC, 2 pins, pitch 3.81mm, size 7.51x7.3mm^2, drill diamater 0.7mm, pad diameter 1.4mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310861_RT034xxHBLC_OFF-026114K.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type086_RT03402HBLC pitch 3.81mm size 7.51x7.3mm^2 drill 0.7mm pad 1.4mm +0 +2 +2 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type086_RT03403HBLC_1x03_P3.81mm_Horizontal +terminal block Metz Connect Type086_RT03403HBLC, 3 pins, pitch 3.81mm, size 11.3x7.3mm^2, drill diamater 0.7mm, pad diameter 1.4mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310861_RT034xxHBLC_OFF-026114K.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type086_RT03403HBLC pitch 3.81mm size 11.3x7.3mm^2 drill 0.7mm pad 1.4mm +0 +3 +3 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type086_RT03404HBLC_1x04_P3.81mm_Horizontal +terminal block Metz Connect Type086_RT03404HBLC, 4 pins, pitch 3.81mm, size 15.1x7.3mm^2, drill diamater 0.7mm, pad diameter 1.4mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310861_RT034xxHBLC_OFF-026114K.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type086_RT03404HBLC pitch 3.81mm size 15.1x7.3mm^2 drill 0.7mm pad 1.4mm +0 +4 +4 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type086_RT03405HBLC_1x05_P3.81mm_Horizontal +terminal block Metz Connect Type086_RT03405HBLC, 5 pins, pitch 3.81mm, size 18.9x7.3mm^2, drill diamater 0.7mm, pad diameter 1.4mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310861_RT034xxHBLC_OFF-026114K.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type086_RT03405HBLC pitch 3.81mm size 18.9x7.3mm^2 drill 0.7mm pad 1.4mm +0 +5 +5 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type086_RT03406HBLC_1x06_P3.81mm_Horizontal +terminal block Metz Connect Type086_RT03406HBLC, 6 pins, pitch 3.81mm, size 22.8x7.3mm^2, drill diamater 0.7mm, pad diameter 1.4mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310861_RT034xxHBLC_OFF-026114K.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type086_RT03406HBLC pitch 3.81mm size 22.8x7.3mm^2 drill 0.7mm pad 1.4mm +0 +6 +6 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type094_RT03502HBLU_1x02_P5.00mm_Horizontal +terminal block Metz Connect Type094_RT03502HBLU, 2 pins, pitch 5mm, size 10x8.3mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.metz-connect.com/ru/system/files/productfiles/Data_sheet_310941_RT035xxHBLU_OFF-022742T.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type094_RT03502HBLU pitch 5mm size 10x8.3mm^2 drill 1.3mm pad 2.6mm +0 +2 +2 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type094_RT03503HBLU_1x03_P5.00mm_Horizontal +terminal block Metz Connect Type094_RT03503HBLU, 3 pins, pitch 5mm, size 15x8.3mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.metz-connect.com/ru/system/files/productfiles/Data_sheet_310941_RT035xxHBLU_OFF-022742T.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type094_RT03503HBLU pitch 5mm size 15x8.3mm^2 drill 1.3mm pad 2.6mm +0 +3 +3 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type094_RT03504HBLU_1x04_P5.00mm_Horizontal +terminal block Metz Connect Type094_RT03504HBLU, 4 pins, pitch 5mm, size 20x8.3mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.metz-connect.com/ru/system/files/productfiles/Data_sheet_310941_RT035xxHBLU_OFF-022742T.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type094_RT03504HBLU pitch 5mm size 20x8.3mm^2 drill 1.3mm pad 2.6mm +0 +4 +4 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type094_RT03505HBLU_1x05_P5.00mm_Horizontal +terminal block Metz Connect Type094_RT03505HBLU, 5 pins, pitch 5mm, size 25x8.3mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.metz-connect.com/ru/system/files/productfiles/Data_sheet_310941_RT035xxHBLU_OFF-022742T.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type094_RT03505HBLU pitch 5mm size 25x8.3mm^2 drill 1.3mm pad 2.6mm +0 +5 +5 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type094_RT03506HBLU_1x06_P5.00mm_Horizontal +terminal block Metz Connect Type094_RT03506HBLU, 6 pins, pitch 5mm, size 30x8.3mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.metz-connect.com/ru/system/files/productfiles/Data_sheet_310941_RT035xxHBLU_OFF-022742T.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type094_RT03506HBLU pitch 5mm size 30x8.3mm^2 drill 1.3mm pad 2.6mm +0 +6 +6 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type101_RT01602HBWC_1x02_P5.08mm_Horizontal +terminal block Metz Connect Type101_RT01602HBWC, 2 pins, pitch 5.08mm, size 10.2x8mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311011_RT016xxHBWC_OFF-022771S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type101_RT01602HBWC pitch 5.08mm size 10.2x8mm^2 drill 1.3mm pad 2.5mm +0 +2 +2 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type101_RT01603HBWC_1x03_P5.08mm_Horizontal +terminal block Metz Connect Type101_RT01603HBWC, 3 pins, pitch 5.08mm, size 15.2x8mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311011_RT016xxHBWC_OFF-022771S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type101_RT01603HBWC pitch 5.08mm size 15.2x8mm^2 drill 1.3mm pad 2.5mm +0 +3 +3 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type101_RT01604HBWC_1x04_P5.08mm_Horizontal +terminal block Metz Connect Type101_RT01604HBWC, 4 pins, pitch 5.08mm, size 20.3x8mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311011_RT016xxHBWC_OFF-022771S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type101_RT01604HBWC pitch 5.08mm size 20.3x8mm^2 drill 1.3mm pad 2.5mm +0 +4 +4 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type101_RT01605HBWC_1x05_P5.08mm_Horizontal +terminal block Metz Connect Type101_RT01605HBWC, 5 pins, pitch 5.08mm, size 25.4x8mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311011_RT016xxHBWC_OFF-022771S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type101_RT01605HBWC pitch 5.08mm size 25.4x8mm^2 drill 1.3mm pad 2.5mm +0 +5 +5 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type101_RT01606HBWC_1x06_P5.08mm_Horizontal +terminal block Metz Connect Type101_RT01606HBWC, 6 pins, pitch 5.08mm, size 30.5x8mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311011_RT016xxHBWC_OFF-022771S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type101_RT01606HBWC pitch 5.08mm size 30.5x8mm^2 drill 1.3mm pad 2.5mm +0 +6 +6 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type171_RT13702HBWC_1x02_P7.50mm_Horizontal +terminal block Metz Connect Type171_RT13702HBWC, 2 pins, pitch 7.5mm, size 15x9mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311711_RT137xxHBWC_OFF-022811Q.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type171_RT13702HBWC pitch 7.5mm size 15x9mm^2 drill 1.3mm pad 2.5mm +0 +2 +2 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type171_RT13703HBWC_1x03_P7.50mm_Horizontal +terminal block Metz Connect Type171_RT13703HBWC, 3 pins, pitch 7.5mm, size 22.5x9mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311711_RT137xxHBWC_OFF-022811Q.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type171_RT13703HBWC pitch 7.5mm size 22.5x9mm^2 drill 1.3mm pad 2.5mm +0 +3 +3 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type171_RT13704HBWC_1x04_P7.50mm_Horizontal +terminal block Metz Connect Type171_RT13704HBWC, 4 pins, pitch 7.5mm, size 30x9mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311711_RT137xxHBWC_OFF-022811Q.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type171_RT13704HBWC pitch 7.5mm size 30x9mm^2 drill 1.3mm pad 2.5mm +0 +4 +4 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type171_RT13705HBWC_1x05_P7.50mm_Horizontal +terminal block Metz Connect Type171_RT13705HBWC, 5 pins, pitch 7.5mm, size 37.5x9mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311711_RT137xxHBWC_OFF-022811Q.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type171_RT13705HBWC pitch 7.5mm size 37.5x9mm^2 drill 1.3mm pad 2.5mm +0 +5 +5 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type171_RT13706HBWC_1x06_P7.50mm_Horizontal +terminal block Metz Connect Type171_RT13706HBWC, 6 pins, pitch 7.5mm, size 45x9mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311711_RT137xxHBWC_OFF-022811Q.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type171_RT13706HBWC pitch 7.5mm size 45x9mm^2 drill 1.3mm pad 2.5mm +0 +6 +6 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type175_RT02702HBLC_1x02_P7.50mm_Horizontal +terminal block Metz Connect Type175_RT02702HBLC, 2 pins, pitch 7.5mm, size 15x11mm^2, drill diamater 1.4mm, pad diameter 2.6mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311751_RT027xxHBLC_OFF-022814U.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type175_RT02702HBLC pitch 7.5mm size 15x11mm^2 drill 1.4mm pad 2.6mm +0 +2 +2 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type175_RT02703HBLC_1x03_P7.50mm_Horizontal +terminal block Metz Connect Type175_RT02703HBLC, 3 pins, pitch 7.5mm, size 22.5x11mm^2, drill diamater 1.4mm, pad diameter 2.6mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311751_RT027xxHBLC_OFF-022814U.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type175_RT02703HBLC pitch 7.5mm size 22.5x11mm^2 drill 1.4mm pad 2.6mm +0 +3 +3 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type175_RT02704HBLC_1x04_P7.50mm_Horizontal +terminal block Metz Connect Type175_RT02704HBLC, 4 pins, pitch 7.5mm, size 30x11mm^2, drill diamater 1.4mm, pad diameter 2.6mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311751_RT027xxHBLC_OFF-022814U.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type175_RT02704HBLC pitch 7.5mm size 30x11mm^2 drill 1.4mm pad 2.6mm +0 +4 +4 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type175_RT02705HBLC_1x05_P7.50mm_Horizontal +terminal block Metz Connect Type175_RT02705HBLC, 5 pins, pitch 7.5mm, size 37.5x11mm^2, drill diamater 1.4mm, pad diameter 2.6mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311751_RT027xxHBLC_OFF-022814U.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type175_RT02705HBLC pitch 7.5mm size 37.5x11mm^2 drill 1.4mm pad 2.6mm +0 +5 +5 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type175_RT02706HBLC_1x06_P7.50mm_Horizontal +terminal block Metz Connect Type175_RT02706HBLC, 6 pins, pitch 7.5mm, size 45x11mm^2, drill diamater 1.4mm, pad diameter 2.6mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311751_RT027xxHBLC_OFF-022814U.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type175_RT02706HBLC pitch 7.5mm size 45x11mm^2 drill 1.4mm pad 2.6mm +0 +6 +6 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type205_RT04502UBLC_1x02_P5.00mm_45Degree +terminal block Metz Connect Type205_RT04502UBLC, 45Degree (cable under 45degree), 2 pins, pitch 5mm, size 10x12.5mm^2, drill diamater 1.4mm, pad diameter 2.7mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_312051_RT045xxUBLC_OFF-022759T.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type205_RT04502UBLC 45Degree pitch 5mm size 10x12.5mm^2 drill 1.4mm pad 2.7mm +0 +2 +2 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type205_RT04503UBLC_1x03_P5.00mm_45Degree +terminal block Metz Connect Type205_RT04503UBLC, 45Degree (cable under 45degree), 3 pins, pitch 5mm, size 15x12.5mm^2, drill diamater 1.4mm, pad diameter 2.7mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_312051_RT045xxUBLC_OFF-022759T.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type205_RT04503UBLC 45Degree pitch 5mm size 15x12.5mm^2 drill 1.4mm pad 2.7mm +0 +3 +3 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type205_RT04504UBLC_1x04_P5.00mm_45Degree +terminal block Metz Connect Type205_RT04504UBLC, 45Degree (cable under 45degree), 4 pins, pitch 5mm, size 20x12.5mm^2, drill diamater 1.4mm, pad diameter 2.7mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_312051_RT045xxUBLC_OFF-022759T.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type205_RT04504UBLC 45Degree pitch 5mm size 20x12.5mm^2 drill 1.4mm pad 2.7mm +0 +4 +4 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type205_RT04505UBLC_1x05_P5.00mm_45Degree +terminal block Metz Connect Type205_RT04505UBLC, 45Degree (cable under 45degree), 5 pins, pitch 5mm, size 25x12.5mm^2, drill diamater 1.4mm, pad diameter 2.7mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_312051_RT045xxUBLC_OFF-022759T.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type205_RT04505UBLC 45Degree pitch 5mm size 25x12.5mm^2 drill 1.4mm pad 2.7mm +0 +5 +5 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type205_RT04506UBLC_1x06_P5.00mm_45Degree +terminal block Metz Connect Type205_RT04506UBLC, 45Degree (cable under 45degree), 6 pins, pitch 5mm, size 30x12.5mm^2, drill diamater 1.4mm, pad diameter 2.7mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_312051_RT045xxUBLC_OFF-022759T.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type205_RT04506UBLC 45Degree pitch 5mm size 30x12.5mm^2 drill 1.4mm pad 2.7mm +0 +6 +6 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type701_RT11L02HGLU_1x02_P6.35mm_Horizontal +terminal block Metz Connect Type701_RT11L02HGLU, 2 pins, pitch 6.35mm, size 12.7x12.5mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_317011_RT11LxxHGLU_OFF-022798U.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type701_RT11L02HGLU pitch 6.35mm size 12.7x12.5mm^2 drill 1.3mm pad 2.5mm +0 +2 +2 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type701_RT11L03HGLU_1x03_P6.35mm_Horizontal +terminal block Metz Connect Type701_RT11L03HGLU, 3 pins, pitch 6.35mm, size 19x12.5mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_317011_RT11LxxHGLU_OFF-022798U.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type701_RT11L03HGLU pitch 6.35mm size 19x12.5mm^2 drill 1.3mm pad 2.5mm +0 +3 +3 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type703_RT10N02HGLU_1x02_P9.52mm_Horizontal +terminal block Metz Connect Type703_RT10N02HGLU, 2 pins, pitch 9.52mm, size 19x12.5mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_317031_RT10NxxHGLU_OFF-022897S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type703_RT10N02HGLU pitch 9.52mm size 19x12.5mm^2 drill 1.3mm pad 2.6mm +0 +2 +2 +TerminalBlock_MetzConnect +TerminalBlock_MetzConnect_Type703_RT10N03HGLU_1x03_P9.52mm_Horizontal +terminal block Metz Connect Type703_RT10N03HGLU, 3 pins, pitch 9.52mm, size 28.6x12.5mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_317031_RT10NxxHGLU_OFF-022897S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect +THT terminal block Metz Connect Type703_RT10N03HGLU pitch 9.52mm size 28.6x12.5mm^2 drill 1.3mm pad 2.6mm +0 +3 +3 +TerminalBlock_Philmore +TerminalBlock_Philmore_TB132_1x02_P5.00mm_Horizontal +Terminal Block Philmore , 2 pins, pitch 5mm, size 10x10.2mm^2, drill diamater 1.2mm, pad diameter 2.4mm, see http://www.philmore-datak.com/mc/Page%20197.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Philmore +THT Terminal Block Philmore pitch 5mm size 10x10.2mm^2 drill 1.2mm pad 2.4mm +0 +2 +2 +TerminalBlock_Philmore +TerminalBlock_Philmore_TB133_1x03_P5.00mm_Horizontal +Terminal Block Philmore , 3 pins, pitch 5mm, size 15x10.2mm^2, drill diamater 1.2mm, pad diameter 2.4mm, see http://www.philmore-datak.com/mc/Page%20197.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Philmore +THT Terminal Block Philmore pitch 5mm size 15x10.2mm^2 drill 1.2mm pad 2.4mm +0 +3 +3 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal +Terminal Block Phoenix MKDS-1,5-2-5.08, 2 pins, pitch 5.08mm, size 10.2x9.8mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MKDS-1,5-2-5.08 pitch 5.08mm size 10.2x9.8mm^2 drill 1.3mm pad 2.6mm +0 +2 +2 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal +Terminal Block Phoenix MKDS-1,5-2, 2 pins, pitch 5mm, size 10x9.8mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MKDS-1,5-2 pitch 5mm size 10x9.8mm^2 drill 1.3mm pad 2.6mm +0 +2 +2 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MKDS-1,5-3-5.08_1x03_P5.08mm_Horizontal +Terminal Block Phoenix MKDS-1,5-3-5.08, 3 pins, pitch 5.08mm, size 15.2x9.8mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MKDS-1,5-3-5.08 pitch 5.08mm size 15.2x9.8mm^2 drill 1.3mm pad 2.6mm +0 +3 +3 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MKDS-1,5-3_1x03_P5.00mm_Horizontal +Terminal Block Phoenix MKDS-1,5-3, 3 pins, pitch 5mm, size 15x9.8mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MKDS-1,5-3 pitch 5mm size 15x9.8mm^2 drill 1.3mm pad 2.6mm +0 +3 +3 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MKDS-1,5-4-5.08_1x04_P5.08mm_Horizontal +Terminal Block Phoenix MKDS-1,5-4-5.08, 4 pins, pitch 5.08mm, size 20.3x9.8mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MKDS-1,5-4-5.08 pitch 5.08mm size 20.3x9.8mm^2 drill 1.3mm pad 2.6mm +0 +4 +4 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MKDS-1,5-4_1x04_P5.00mm_Horizontal +Terminal Block Phoenix MKDS-1,5-4, 4 pins, pitch 5mm, size 20x9.8mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MKDS-1,5-4 pitch 5mm size 20x9.8mm^2 drill 1.3mm pad 2.6mm +0 +4 +4 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MKDS-1,5-5-5.08_1x05_P5.08mm_Horizontal +Terminal Block Phoenix MKDS-1,5-5-5.08, 5 pins, pitch 5.08mm, size 25.4x9.8mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MKDS-1,5-5-5.08 pitch 5.08mm size 25.4x9.8mm^2 drill 1.3mm pad 2.6mm +0 +5 +5 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MKDS-1,5-5_1x05_P5.00mm_Horizontal +Terminal Block Phoenix MKDS-1,5-5, 5 pins, pitch 5mm, size 25x9.8mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MKDS-1,5-5 pitch 5mm size 25x9.8mm^2 drill 1.3mm pad 2.6mm +0 +5 +5 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MKDS-1,5-6-5.08_1x06_P5.08mm_Horizontal +Terminal Block Phoenix MKDS-1,5-6-5.08, 6 pins, pitch 5.08mm, size 30.5x9.8mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MKDS-1,5-6-5.08 pitch 5.08mm size 30.5x9.8mm^2 drill 1.3mm pad 2.6mm +0 +6 +6 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MKDS-1,5-6_1x06_P5.00mm_Horizontal +Terminal Block Phoenix MKDS-1,5-6, 6 pins, pitch 5mm, size 30x9.8mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MKDS-1,5-6 pitch 5mm size 30x9.8mm^2 drill 1.3mm pad 2.6mm +0 +6 +6 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MKDS-1,5-7-5.08_1x07_P5.08mm_Horizontal +Terminal Block Phoenix MKDS-1,5-7-5.08, 7 pins, pitch 5.08mm, size 35.6x9.8mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MKDS-1,5-7-5.08 pitch 5.08mm size 35.6x9.8mm^2 drill 1.3mm pad 2.6mm +0 +7 +7 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MKDS-1,5-7_1x07_P5.00mm_Horizontal +Terminal Block Phoenix MKDS-1,5-7, 7 pins, pitch 5mm, size 35x9.8mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MKDS-1,5-7 pitch 5mm size 35x9.8mm^2 drill 1.3mm pad 2.6mm +0 +7 +7 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MKDS-1,5-8-5.08_1x08_P5.08mm_Horizontal +Terminal Block Phoenix MKDS-1,5-8-5.08, 8 pins, pitch 5.08mm, size 40.6x9.8mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MKDS-1,5-8-5.08 pitch 5.08mm size 40.6x9.8mm^2 drill 1.3mm pad 2.6mm +0 +8 +8 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MKDS-1,5-8_1x08_P5.00mm_Horizontal +Terminal Block Phoenix MKDS-1,5-8, 8 pins, pitch 5mm, size 40x9.8mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MKDS-1,5-8 pitch 5mm size 40x9.8mm^2 drill 1.3mm pad 2.6mm +0 +8 +8 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MKDS-1,5-9-5.08_1x09_P5.08mm_Horizontal +Terminal Block Phoenix MKDS-1,5-9-5.08, 9 pins, pitch 5.08mm, size 45.7x9.8mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MKDS-1,5-9-5.08 pitch 5.08mm size 45.7x9.8mm^2 drill 1.3mm pad 2.6mm +0 +9 +9 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MKDS-1,5-9_1x09_P5.00mm_Horizontal +Terminal Block Phoenix MKDS-1,5-9, 9 pins, pitch 5mm, size 45x9.8mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MKDS-1,5-9 pitch 5mm size 45x9.8mm^2 drill 1.3mm pad 2.6mm +0 +9 +9 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MKDS-1,5-10-5.08_1x10_P5.08mm_Horizontal +Terminal Block Phoenix MKDS-1,5-10-5.08, 10 pins, pitch 5.08mm, size 50.8x9.8mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MKDS-1,5-10-5.08 pitch 5.08mm size 50.8x9.8mm^2 drill 1.3mm pad 2.6mm +0 +10 +10 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MKDS-1,5-10_1x10_P5.00mm_Horizontal +Terminal Block Phoenix MKDS-1,5-10, 10 pins, pitch 5mm, size 50x9.8mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MKDS-1,5-10 pitch 5mm size 50x9.8mm^2 drill 1.3mm pad 2.6mm +0 +10 +10 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MKDS-1,5-11-5.08_1x11_P5.08mm_Horizontal +Terminal Block Phoenix MKDS-1,5-11-5.08, 11 pins, pitch 5.08mm, size 55.9x9.8mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MKDS-1,5-11-5.08 pitch 5.08mm size 55.9x9.8mm^2 drill 1.3mm pad 2.6mm +0 +11 +11 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MKDS-1,5-11_1x11_P5.00mm_Horizontal +Terminal Block Phoenix MKDS-1,5-11, 11 pins, pitch 5mm, size 55x9.8mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MKDS-1,5-11 pitch 5mm size 55x9.8mm^2 drill 1.3mm pad 2.6mm +0 +11 +11 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MKDS-1,5-12-5.08_1x12_P5.08mm_Horizontal +Terminal Block Phoenix MKDS-1,5-12-5.08, 12 pins, pitch 5.08mm, size 61x9.8mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MKDS-1,5-12-5.08 pitch 5.08mm size 61x9.8mm^2 drill 1.3mm pad 2.6mm +0 +12 +12 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MKDS-1,5-12_1x12_P5.00mm_Horizontal +Terminal Block Phoenix MKDS-1,5-12, 12 pins, pitch 5mm, size 60x9.8mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MKDS-1,5-12 pitch 5mm size 60x9.8mm^2 drill 1.3mm pad 2.6mm +0 +12 +12 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MKDS-1,5-13-5.08_1x13_P5.08mm_Horizontal +Terminal Block Phoenix MKDS-1,5-13-5.08, 13 pins, pitch 5.08mm, size 66x9.8mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MKDS-1,5-13-5.08 pitch 5.08mm size 66x9.8mm^2 drill 1.3mm pad 2.6mm +0 +13 +13 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MKDS-1,5-13_1x13_P5.00mm_Horizontal +Terminal Block Phoenix MKDS-1,5-13, 13 pins, pitch 5mm, size 65x9.8mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MKDS-1,5-13 pitch 5mm size 65x9.8mm^2 drill 1.3mm pad 2.6mm +0 +13 +13 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MKDS-1,5-14-5.08_1x14_P5.08mm_Horizontal +Terminal Block Phoenix MKDS-1,5-14-5.08, 14 pins, pitch 5.08mm, size 71.1x9.8mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MKDS-1,5-14-5.08 pitch 5.08mm size 71.1x9.8mm^2 drill 1.3mm pad 2.6mm +0 +14 +14 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MKDS-1,5-14_1x14_P5.00mm_Horizontal +Terminal Block Phoenix MKDS-1,5-14, 14 pins, pitch 5mm, size 70x9.8mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MKDS-1,5-14 pitch 5mm size 70x9.8mm^2 drill 1.3mm pad 2.6mm +0 +14 +14 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MKDS-1,5-15-5.08_1x15_P5.08mm_Horizontal +Terminal Block Phoenix MKDS-1,5-15-5.08, 15 pins, pitch 5.08mm, size 76.2x9.8mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MKDS-1,5-15-5.08 pitch 5.08mm size 76.2x9.8mm^2 drill 1.3mm pad 2.6mm +0 +15 +15 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MKDS-1,5-15_1x15_P5.00mm_Horizontal +Terminal Block Phoenix MKDS-1,5-15, 15 pins, pitch 5mm, size 75x9.8mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MKDS-1,5-15 pitch 5mm size 75x9.8mm^2 drill 1.3mm pad 2.6mm +0 +15 +15 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MKDS-1,5-16-5.08_1x16_P5.08mm_Horizontal +Terminal Block Phoenix MKDS-1,5-16-5.08, 16 pins, pitch 5.08mm, size 81.3x9.8mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MKDS-1,5-16-5.08 pitch 5.08mm size 81.3x9.8mm^2 drill 1.3mm pad 2.6mm +0 +16 +16 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MKDS-1,5-16_1x16_P5.00mm_Horizontal +Terminal Block Phoenix MKDS-1,5-16, 16 pins, pitch 5mm, size 80x9.8mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MKDS-1,5-16 pitch 5mm size 80x9.8mm^2 drill 1.3mm pad 2.6mm +0 +16 +16 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal +Terminal Block Phoenix MKDS-3-2-5.08, 2 pins, pitch 5.08mm, size 10.2x11.2mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MKDS-3-2-5.08 pitch 5.08mm size 10.2x11.2mm^2 drill 1.3mm pad 2.6mm +0 +2 +2 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MKDS-3-3-5.08_1x03_P5.08mm_Horizontal +Terminal Block Phoenix MKDS-3-3-5.08, 3 pins, pitch 5.08mm, size 15.2x11.2mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MKDS-3-3-5.08 pitch 5.08mm size 15.2x11.2mm^2 drill 1.3mm pad 2.6mm +0 +3 +3 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MKDS-3-4-5.08_1x04_P5.08mm_Horizontal +Terminal Block Phoenix MKDS-3-4-5.08, 4 pins, pitch 5.08mm, size 20.3x11.2mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MKDS-3-4-5.08 pitch 5.08mm size 20.3x11.2mm^2 drill 1.3mm pad 2.6mm +0 +4 +4 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MKDS-3-5-5.08_1x05_P5.08mm_Horizontal +Terminal Block Phoenix MKDS-3-5-5.08, 5 pins, pitch 5.08mm, size 25.4x11.2mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MKDS-3-5-5.08 pitch 5.08mm size 25.4x11.2mm^2 drill 1.3mm pad 2.6mm +0 +5 +5 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MKDS-3-6-5.08_1x06_P5.08mm_Horizontal +Terminal Block Phoenix MKDS-3-6-5.08, 6 pins, pitch 5.08mm, size 30.5x11.2mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MKDS-3-6-5.08 pitch 5.08mm size 30.5x11.2mm^2 drill 1.3mm pad 2.6mm +0 +6 +6 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MKDS-3-7-5.08_1x07_P5.08mm_Horizontal +Terminal Block Phoenix MKDS-3-7-5.08, 7 pins, pitch 5.08mm, size 35.6x11.2mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MKDS-3-7-5.08 pitch 5.08mm size 35.6x11.2mm^2 drill 1.3mm pad 2.6mm +0 +7 +7 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MKDS-3-8-5.08_1x08_P5.08mm_Horizontal +Terminal Block Phoenix MKDS-3-8-5.08, 8 pins, pitch 5.08mm, size 40.6x11.2mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MKDS-3-8-5.08 pitch 5.08mm size 40.6x11.2mm^2 drill 1.3mm pad 2.6mm +0 +8 +8 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MKDS-3-9-5.08_1x09_P5.08mm_Horizontal +Terminal Block Phoenix MKDS-3-9-5.08, 9 pins, pitch 5.08mm, size 45.7x11.2mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MKDS-3-9-5.08 pitch 5.08mm size 45.7x11.2mm^2 drill 1.3mm pad 2.6mm +0 +9 +9 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MKDS-3-10-5.08_1x10_P5.08mm_Horizontal +Terminal Block Phoenix MKDS-3-10-5.08, 10 pins, pitch 5.08mm, size 50.8x11.2mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MKDS-3-10-5.08 pitch 5.08mm size 50.8x11.2mm^2 drill 1.3mm pad 2.6mm +0 +10 +10 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MKDS-3-11-5.08_1x11_P5.08mm_Horizontal +Terminal Block Phoenix MKDS-3-11-5.08, 11 pins, pitch 5.08mm, size 55.9x11.2mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MKDS-3-11-5.08 pitch 5.08mm size 55.9x11.2mm^2 drill 1.3mm pad 2.6mm +0 +11 +11 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MKDS-3-12-5.08_1x12_P5.08mm_Horizontal +Terminal Block Phoenix MKDS-3-12-5.08, 12 pins, pitch 5.08mm, size 61x11.2mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MKDS-3-12-5.08 pitch 5.08mm size 61x11.2mm^2 drill 1.3mm pad 2.6mm +0 +12 +12 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MKDS-3-13-5.08_1x13_P5.08mm_Horizontal +Terminal Block Phoenix MKDS-3-13-5.08, 13 pins, pitch 5.08mm, size 66x11.2mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MKDS-3-13-5.08 pitch 5.08mm size 66x11.2mm^2 drill 1.3mm pad 2.6mm +0 +13 +13 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MKDS-3-14-5.08_1x14_P5.08mm_Horizontal +Terminal Block Phoenix MKDS-3-14-5.08, 14 pins, pitch 5.08mm, size 71.1x11.2mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MKDS-3-14-5.08 pitch 5.08mm size 71.1x11.2mm^2 drill 1.3mm pad 2.6mm +0 +14 +14 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MKDS-3-15-5.08_1x15_P5.08mm_Horizontal +Terminal Block Phoenix MKDS-3-15-5.08, 15 pins, pitch 5.08mm, size 76.2x11.2mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MKDS-3-15-5.08 pitch 5.08mm size 76.2x11.2mm^2 drill 1.3mm pad 2.6mm +0 +15 +15 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MKDS-3-16-5.08_1x16_P5.08mm_Horizontal +Terminal Block Phoenix MKDS-3-16-5.08, 16 pins, pitch 5.08mm, size 81.3x11.2mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MKDS-3-16-5.08 pitch 5.08mm size 81.3x11.2mm^2 drill 1.3mm pad 2.6mm +0 +16 +16 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_Horizontal +Terminal Block Phoenix MPT-0,5-2-2.54, 2 pins, pitch 2.54mm, size 5.54x6.2mm^2, drill diamater 1.1mm, pad diameter 2.2mm, see http://www.mouser.com/ds/2/324/ItemDetail_1725656-920552.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MPT-0,5-2-2.54 pitch 2.54mm size 5.54x6.2mm^2 drill 1.1mm pad 2.2mm +0 +2 +2 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MPT-0,5-3-2.54_1x03_P2.54mm_Horizontal +Terminal Block Phoenix MPT-0,5-3-2.54, 3 pins, pitch 2.54mm, size 8.08x6.2mm^2, drill diamater 1.1mm, pad diameter 2.2mm, see http://www.mouser.com/ds/2/324/ItemDetail_1725656-920552.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MPT-0,5-3-2.54 pitch 2.54mm size 8.08x6.2mm^2 drill 1.1mm pad 2.2mm +0 +3 +3 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MPT-0,5-4-2.54_1x04_P2.54mm_Horizontal +Terminal Block Phoenix MPT-0,5-4-2.54, 4 pins, pitch 2.54mm, size 10.6x6.2mm^2, drill diamater 1.1mm, pad diameter 2.2mm, see http://www.mouser.com/ds/2/324/ItemDetail_1725672-916605.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MPT-0,5-4-2.54 pitch 2.54mm size 10.6x6.2mm^2 drill 1.1mm pad 2.2mm +0 +4 +4 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MPT-0,5-5-2.54_1x05_P2.54mm_Horizontal +Terminal Block Phoenix MPT-0,5-5-2.54, 5 pins, pitch 2.54mm, size 13.2x6.2mm^2, drill diamater 1.1mm, pad diameter 2.2mm, see http://www.mouser.com/ds/2/324/ItemDetail_1725672-916605.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MPT-0,5-5-2.54 pitch 2.54mm size 13.2x6.2mm^2 drill 1.1mm pad 2.2mm +0 +5 +5 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MPT-0,5-6-2.54_1x06_P2.54mm_Horizontal +Terminal Block Phoenix MPT-0,5-6-2.54, 6 pins, pitch 2.54mm, size 15.7x6.2mm^2, drill diamater 1.1mm, pad diameter 2.2mm, see http://www.mouser.com/ds/2/324/ItemDetail_1725672-916605.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MPT-0,5-6-2.54 pitch 2.54mm size 15.7x6.2mm^2 drill 1.1mm pad 2.2mm +0 +6 +6 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MPT-0,5-7-2.54_1x07_P2.54mm_Horizontal +Terminal Block Phoenix MPT-0,5-7-2.54, 7 pins, pitch 2.54mm, size 18.2x6.2mm^2, drill diamater 1.1mm, pad diameter 2.2mm, see http://www.mouser.com/ds/2/324/ItemDetail_1725672-916605.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MPT-0,5-7-2.54 pitch 2.54mm size 18.2x6.2mm^2 drill 1.1mm pad 2.2mm +0 +7 +7 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MPT-0,5-8-2.54_1x08_P2.54mm_Horizontal +Terminal Block Phoenix MPT-0,5-8-2.54, 8 pins, pitch 2.54mm, size 20.8x6.2mm^2, drill diamater 1.1mm, pad diameter 2.2mm, see http://www.mouser.com/ds/2/324/ItemDetail_1725672-916605.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MPT-0,5-8-2.54 pitch 2.54mm size 20.8x6.2mm^2 drill 1.1mm pad 2.2mm +0 +8 +8 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MPT-0,5-9-2.54_1x09_P2.54mm_Horizontal +Terminal Block Phoenix MPT-0,5-9-2.54, 9 pins, pitch 2.54mm, size 23.3x6.2mm^2, drill diamater 1.1mm, pad diameter 2.2mm, see http://www.mouser.com/ds/2/324/ItemDetail_1725672-916605.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MPT-0,5-9-2.54 pitch 2.54mm size 23.3x6.2mm^2 drill 1.1mm pad 2.2mm +0 +9 +9 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MPT-0,5-10-2.54_1x10_P2.54mm_Horizontal +Terminal Block Phoenix MPT-0,5-10-2.54, 10 pins, pitch 2.54mm, size 25.9x6.2mm^2, drill diamater 1.1mm, pad diameter 2.2mm, see http://www.mouser.com/ds/2/324/ItemDetail_1725672-916605.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MPT-0,5-10-2.54 pitch 2.54mm size 25.9x6.2mm^2 drill 1.1mm pad 2.2mm +0 +10 +10 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MPT-0,5-11-2.54_1x11_P2.54mm_Horizontal +Terminal Block Phoenix MPT-0,5-11-2.54, 11 pins, pitch 2.54mm, size 28.4x6.2mm^2, drill diamater 1.1mm, pad diameter 2.2mm, see http://www.mouser.com/ds/2/324/ItemDetail_1725672-916605.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MPT-0,5-11-2.54 pitch 2.54mm size 28.4x6.2mm^2 drill 1.1mm pad 2.2mm +0 +11 +11 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_MPT-0,5-12-2.54_1x12_P2.54mm_Horizontal +Terminal Block Phoenix MPT-0,5-12-2.54, 12 pins, pitch 2.54mm, size 30.9x6.2mm^2, drill diamater 1.1mm, pad diameter 2.2mm, see http://www.mouser.com/ds/2/324/ItemDetail_1725672-916605.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix MPT-0,5-12-2.54 pitch 2.54mm size 30.9x6.2mm^2 drill 1.1mm pad 2.2mm +0 +12 +12 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal +Terminal Block Phoenix PT-1,5-2-3.5-H, 2 pins, pitch 3.5mm, size 7x7.6mm^2, drill diamater 1.2mm, pad diameter 2.4mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix PT-1,5-2-3.5-H pitch 3.5mm size 7x7.6mm^2 drill 1.2mm pad 2.4mm +0 +2 +2 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal +Terminal Block Phoenix PT-1,5-2-5.0-H, 2 pins, pitch 5mm, size 10x9mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix PT-1,5-2-5.0-H pitch 5mm size 10x9mm^2 drill 1.3mm pad 2.6mm +0 +2 +2 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PT-1,5-3-3.5-H_1x03_P3.50mm_Horizontal +Terminal Block Phoenix PT-1,5-3-3.5-H, 3 pins, pitch 3.5mm, size 10.5x7.6mm^2, drill diamater 1.2mm, pad diameter 2.4mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix PT-1,5-3-3.5-H pitch 3.5mm size 10.5x7.6mm^2 drill 1.2mm pad 2.4mm +0 +3 +3 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PT-1,5-3-5.0-H_1x03_P5.00mm_Horizontal +Terminal Block Phoenix PT-1,5-3-5.0-H, 3 pins, pitch 5mm, size 15x9mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix PT-1,5-3-5.0-H pitch 5mm size 15x9mm^2 drill 1.3mm pad 2.6mm +0 +3 +3 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PT-1,5-4-3.5-H_1x04_P3.50mm_Horizontal +Terminal Block Phoenix PT-1,5-4-3.5-H, 4 pins, pitch 3.5mm, size 14x7.6mm^2, drill diamater 1.2mm, pad diameter 2.4mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix PT-1,5-4-3.5-H pitch 3.5mm size 14x7.6mm^2 drill 1.2mm pad 2.4mm +0 +4 +4 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PT-1,5-4-5.0-H_1x04_P5.00mm_Horizontal +Terminal Block Phoenix PT-1,5-4-5.0-H, 4 pins, pitch 5mm, size 20x9mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix PT-1,5-4-5.0-H pitch 5mm size 20x9mm^2 drill 1.3mm pad 2.6mm +0 +4 +4 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PT-1,5-5-3.5-H_1x05_P3.50mm_Horizontal +Terminal Block Phoenix PT-1,5-5-3.5-H, 5 pins, pitch 3.5mm, size 17.5x7.6mm^2, drill diamater 1.2mm, pad diameter 2.4mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix PT-1,5-5-3.5-H pitch 3.5mm size 17.5x7.6mm^2 drill 1.2mm pad 2.4mm +0 +5 +5 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PT-1,5-5-5.0-H_1x05_P5.00mm_Horizontal +Terminal Block Phoenix PT-1,5-5-5.0-H, 5 pins, pitch 5mm, size 25x9mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix PT-1,5-5-5.0-H pitch 5mm size 25x9mm^2 drill 1.3mm pad 2.6mm +0 +5 +5 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PT-1,5-6-3.5-H_1x06_P3.50mm_Horizontal +Terminal Block Phoenix PT-1,5-6-3.5-H, 6 pins, pitch 3.5mm, size 21x7.6mm^2, drill diamater 1.2mm, pad diameter 2.4mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix PT-1,5-6-3.5-H pitch 3.5mm size 21x7.6mm^2 drill 1.2mm pad 2.4mm +0 +6 +6 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PT-1,5-6-5.0-H_1x06_P5.00mm_Horizontal +Terminal Block Phoenix PT-1,5-6-5.0-H, 6 pins, pitch 5mm, size 30x9mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix PT-1,5-6-5.0-H pitch 5mm size 30x9mm^2 drill 1.3mm pad 2.6mm +0 +6 +6 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PT-1,5-7-3.5-H_1x07_P3.50mm_Horizontal +Terminal Block Phoenix PT-1,5-7-3.5-H, 7 pins, pitch 3.5mm, size 24.5x7.6mm^2, drill diamater 1.2mm, pad diameter 2.4mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix PT-1,5-7-3.5-H pitch 3.5mm size 24.5x7.6mm^2 drill 1.2mm pad 2.4mm +0 +7 +7 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PT-1,5-7-5.0-H_1x07_P5.00mm_Horizontal +Terminal Block Phoenix PT-1,5-7-5.0-H, 7 pins, pitch 5mm, size 35x9mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix PT-1,5-7-5.0-H pitch 5mm size 35x9mm^2 drill 1.3mm pad 2.6mm +0 +7 +7 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PT-1,5-8-3.5-H_1x08_P3.50mm_Horizontal +Terminal Block Phoenix PT-1,5-8-3.5-H, 8 pins, pitch 3.5mm, size 28x7.6mm^2, drill diamater 1.2mm, pad diameter 2.4mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix PT-1,5-8-3.5-H pitch 3.5mm size 28x7.6mm^2 drill 1.2mm pad 2.4mm +0 +8 +8 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PT-1,5-8-5.0-H_1x08_P5.00mm_Horizontal +Terminal Block Phoenix PT-1,5-8-5.0-H, 8 pins, pitch 5mm, size 40x9mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix PT-1,5-8-5.0-H pitch 5mm size 40x9mm^2 drill 1.3mm pad 2.6mm +0 +8 +8 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PT-1,5-9-3.5-H_1x09_P3.50mm_Horizontal +Terminal Block Phoenix PT-1,5-9-3.5-H, 9 pins, pitch 3.5mm, size 31.5x7.6mm^2, drill diamater 1.2mm, pad diameter 2.4mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix PT-1,5-9-3.5-H pitch 3.5mm size 31.5x7.6mm^2 drill 1.2mm pad 2.4mm +0 +9 +9 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PT-1,5-9-5.0-H_1x09_P5.00mm_Horizontal +Terminal Block Phoenix PT-1,5-9-5.0-H, 9 pins, pitch 5mm, size 45x9mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix PT-1,5-9-5.0-H pitch 5mm size 45x9mm^2 drill 1.3mm pad 2.6mm +0 +9 +9 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PT-1,5-10-3.5-H_1x10_P3.50mm_Horizontal +Terminal Block Phoenix PT-1,5-10-3.5-H, 10 pins, pitch 3.5mm, size 35x7.6mm^2, drill diamater 1.2mm, pad diameter 2.4mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix PT-1,5-10-3.5-H pitch 3.5mm size 35x7.6mm^2 drill 1.2mm pad 2.4mm +0 +10 +10 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PT-1,5-10-5.0-H_1x10_P5.00mm_Horizontal +Terminal Block Phoenix PT-1,5-10-5.0-H, 10 pins, pitch 5mm, size 50x9mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix PT-1,5-10-5.0-H pitch 5mm size 50x9mm^2 drill 1.3mm pad 2.6mm +0 +10 +10 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PT-1,5-11-3.5-H_1x11_P3.50mm_Horizontal +Terminal Block Phoenix PT-1,5-11-3.5-H, 11 pins, pitch 3.5mm, size 38.5x7.6mm^2, drill diamater 1.2mm, pad diameter 2.4mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix PT-1,5-11-3.5-H pitch 3.5mm size 38.5x7.6mm^2 drill 1.2mm pad 2.4mm +0 +11 +11 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PT-1,5-11-5.0-H_1x11_P5.00mm_Horizontal +Terminal Block Phoenix PT-1,5-11-5.0-H, 11 pins, pitch 5mm, size 55x9mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix PT-1,5-11-5.0-H pitch 5mm size 55x9mm^2 drill 1.3mm pad 2.6mm +0 +11 +11 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PT-1,5-12-3.5-H_1x12_P3.50mm_Horizontal +Terminal Block Phoenix PT-1,5-12-3.5-H, 12 pins, pitch 3.5mm, size 42x7.6mm^2, drill diamater 1.2mm, pad diameter 2.4mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix PT-1,5-12-3.5-H pitch 3.5mm size 42x7.6mm^2 drill 1.2mm pad 2.4mm +0 +12 +12 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PT-1,5-12-5.0-H_1x12_P5.00mm_Horizontal +Terminal Block Phoenix PT-1,5-12-5.0-H, 12 pins, pitch 5mm, size 60x9mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix PT-1,5-12-5.0-H pitch 5mm size 60x9mm^2 drill 1.3mm pad 2.6mm +0 +12 +12 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PT-1,5-13-3.5-H_1x13_P3.50mm_Horizontal +Terminal Block Phoenix PT-1,5-13-3.5-H, 13 pins, pitch 3.5mm, size 45.5x7.6mm^2, drill diamater 1.2mm, pad diameter 2.4mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix PT-1,5-13-3.5-H pitch 3.5mm size 45.5x7.6mm^2 drill 1.2mm pad 2.4mm +0 +13 +13 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PT-1,5-13-5.0-H_1x13_P5.00mm_Horizontal +Terminal Block Phoenix PT-1,5-13-5.0-H, 13 pins, pitch 5mm, size 65x9mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix PT-1,5-13-5.0-H pitch 5mm size 65x9mm^2 drill 1.3mm pad 2.6mm +0 +13 +13 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PT-1,5-14-3.5-H_1x14_P3.50mm_Horizontal +Terminal Block Phoenix PT-1,5-14-3.5-H, 14 pins, pitch 3.5mm, size 49x7.6mm^2, drill diamater 1.2mm, pad diameter 2.4mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix PT-1,5-14-3.5-H pitch 3.5mm size 49x7.6mm^2 drill 1.2mm pad 2.4mm +0 +14 +14 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PT-1,5-14-5.0-H_1x14_P5.00mm_Horizontal +Terminal Block Phoenix PT-1,5-14-5.0-H, 14 pins, pitch 5mm, size 70x9mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix PT-1,5-14-5.0-H pitch 5mm size 70x9mm^2 drill 1.3mm pad 2.6mm +0 +14 +14 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PT-1,5-15-3.5-H_1x15_P3.50mm_Horizontal +Terminal Block Phoenix PT-1,5-15-3.5-H, 15 pins, pitch 3.5mm, size 52.5x7.6mm^2, drill diamater 1.2mm, pad diameter 2.4mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix PT-1,5-15-3.5-H pitch 3.5mm size 52.5x7.6mm^2 drill 1.2mm pad 2.4mm +0 +15 +15 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PT-1,5-15-5.0-H_1x15_P5.00mm_Horizontal +Terminal Block Phoenix PT-1,5-15-5.0-H, 15 pins, pitch 5mm, size 75x9mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix PT-1,5-15-5.0-H pitch 5mm size 75x9mm^2 drill 1.3mm pad 2.6mm +0 +15 +15 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PT-1,5-16-3.5-H_1x16_P3.50mm_Horizontal +Terminal Block Phoenix PT-1,5-16-3.5-H, 16 pins, pitch 3.5mm, size 56x7.6mm^2, drill diamater 1.2mm, pad diameter 2.4mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix PT-1,5-16-3.5-H pitch 3.5mm size 56x7.6mm^2 drill 1.2mm pad 2.4mm +0 +16 +16 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PT-1,5-16-5.0-H_1x16_P5.00mm_Horizontal +Terminal Block Phoenix PT-1,5-16-5.0-H, 16 pins, pitch 5mm, size 80x9mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix PT-1,5-16-5.0-H pitch 5mm size 80x9mm^2 drill 1.3mm pad 2.6mm +0 +16 +16 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PTSM-0,5-2-2,5-V-SMD_1x02-1MP_P2.50mm_Vertical +PhoenixContact PTSM0,5 2 2,5mm vertical SMD spring clamp terminal block connector http://www.phoenixcontact.com/us/products/1814702/pdf +PhoenixContact PTSM0.5 2 2.5mm vertical SMD spring clamp terminal block connector +0 +4 +3 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PTSM-0,5-2-2.5-H-THR_1x02_P2.50mm_Horizontal +Terminal Block Phoenix PTSM-0,5-2-2.5-H-THR, 2 pins, pitch 2.5mm, size 7.2x10mm^2, drill diamater 1.2mm, pad diameter 3mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556441-da-01-de-LEITERPLATTENKL__PTSM_0_5__8_2_5_H_THR.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix PTSM-0,5-2-2.5-H-THR pitch 2.5mm size 7.2x10mm^2 drill 1.2mm pad 3mm +0 +4 +2 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PTSM-0,5-2-2.5-V-THR_1x02_P2.50mm_Vertical +Terminal Block Phoenix PTSM-0,5-2-2.5-V-THR, vertical (cable from top), 2 pins, pitch 2.5mm, size 5.5x5mm^2, drill diamater 1.2mm, pad diameter 2mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556444-da-01-de-LEITERPLATTENKL__PTSM_0_5__4_2_5_V_THR.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix PTSM-0,5-2-2.5-V-THR vertical pitch 2.5mm size 5.5x5mm^2 drill 1.2mm pad 2mm +0 +4 +2 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PTSM-0,5-2-HV-2.5-SMD_1x02-1MP_P2.50mm_Vertical +PhoenixContact PTSM0,5 2 HV 2,5mm vertical SMD spring clamp terminal block connector http://www.phoenixcontact.com/us/products/1778696/pdf +2.5mm vertical SMD spring clamp terminal block connector +0 +4 +3 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PTSM-0,5-3-2,5-V-SMD_1x03-1MP_P2.50mm_Vertical +PhoenixContact PTSM0,5 3 2,5mm vertical SMD spring clamp terminal block connector http://www.phoenixcontact.com/us/products/1814715/pdf +PhoenixContact PTSM0.5 3 2.5mm vertical SMD spring clamp terminal block connector +0 +5 +4 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PTSM-0,5-3-2.5-H-THR_1x03_P2.50mm_Horizontal +Terminal Block Phoenix PTSM-0,5-3-2.5-H-THR, 3 pins, pitch 2.5mm, size 9.7x10mm^2, drill diamater 1.2mm, pad diameter 3mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556441-da-01-de-LEITERPLATTENKL__PTSM_0_5__8_2_5_H_THR.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix PTSM-0,5-3-2.5-H-THR pitch 2.5mm size 9.7x10mm^2 drill 1.2mm pad 3mm +0 +6 +3 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PTSM-0,5-3-2.5-V-THR_1x03_P2.50mm_Vertical +Terminal Block Phoenix PTSM-0,5-3-2.5-V-THR, vertical (cable from top), 3 pins, pitch 2.5mm, size 8x5mm^2, drill diamater 1.2mm, pad diameter 2mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556444-da-01-de-LEITERPLATTENKL__PTSM_0_5__4_2_5_V_THR.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix PTSM-0,5-3-2.5-V-THR vertical pitch 2.5mm size 8x5mm^2 drill 1.2mm pad 2mm +0 +6 +3 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PTSM-0,5-3-HV-2.5-SMD_1x03-1MP_P2.50mm_Vertical +PhoenixContact PTSM0,5 3 HV 2,5mm vertical SMD spring clamp terminal block connector http://www.phoenixcontact.com/us/products/1778706/pdf +2.5mm vertical SMD spring clamp terminal block connector +0 +5 +4 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PTSM-0,5-4-2,5-V-SMD_1x04-1MP_P2.50mm_Vertical +PhoenixContact PTSM0,5 4 2,5mm vertical SMD spring clamp terminal block connector http://www.phoenixcontact.com/us/products/1814728/pdf +PhoenixContact PTSM0.5 4 2.5mm vertical SMD spring clamp terminal block connector +0 +6 +5 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PTSM-0,5-4-2.5-H-THR_1x04_P2.50mm_Horizontal +Terminal Block Phoenix PTSM-0,5-4-2.5-H-THR, 4 pins, pitch 2.5mm, size 12.2x10mm^2, drill diamater 1.2mm, pad diameter 3mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556441-da-01-de-LEITERPLATTENKL__PTSM_0_5__8_2_5_H_THR.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix PTSM-0,5-4-2.5-H-THR pitch 2.5mm size 12.2x10mm^2 drill 1.2mm pad 3mm +0 +8 +4 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PTSM-0,5-4-2.5-V-THR_1x04_P2.50mm_Vertical +Terminal Block Phoenix PTSM-0,5-4-2.5-V-THR, vertical (cable from top), 4 pins, pitch 2.5mm, size 10.5x5mm^2, drill diamater 1.2mm, pad diameter 2mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556444-da-01-de-LEITERPLATTENKL__PTSM_0_5__4_2_5_V_THR.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix PTSM-0,5-4-2.5-V-THR vertical pitch 2.5mm size 10.5x5mm^2 drill 1.2mm pad 2mm +0 +8 +4 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PTSM-0,5-4-HV-2.5-SMD_1x04-1MP_P2.50mm_Vertical +PhoenixContact PTSM0,5 4 HV 2,5mm vertical SMD spring clamp terminal block connector http://www.phoenixcontact.com/us/products/1778719/pdf +2.5mm vertical SMD spring clamp terminal block connector +0 +4 +3 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PTSM-0,5-5-2,5-V-SMD_1x05-1MP_P2.50mm_Vertical +PhoenixContact PTSM0,5 5 2,5mm vertical SMD spring clamp terminal block connector http://www.phoenixcontact.com/us/products/1814731/pdf +PhoenixContact PTSM0.5 5 2.5mm vertical SMD spring clamp terminal block connector +0 +7 +6 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PTSM-0,5-5-2.5-H-THR_1x05_P2.50mm_Horizontal +Terminal Block Phoenix PTSM-0,5-5-2.5-H-THR, 5 pins, pitch 2.5mm, size 14.7x10mm^2, drill diamater 1.2mm, pad diameter 3mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556441-da-01-de-LEITERPLATTENKL__PTSM_0_5__8_2_5_H_THR.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix PTSM-0,5-5-2.5-H-THR pitch 2.5mm size 14.7x10mm^2 drill 1.2mm pad 3mm +0 +10 +5 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PTSM-0,5-5-2.5-V-THR_1x05_P2.50mm_Vertical +Terminal Block Phoenix PTSM-0,5-5-2.5-V-THR, vertical (cable from top), 5 pins, pitch 2.5mm, size 13x5mm^2, drill diamater 1.2mm, pad diameter 2mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556444-da-01-de-LEITERPLATTENKL__PTSM_0_5__4_2_5_V_THR.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix PTSM-0,5-5-2.5-V-THR vertical pitch 2.5mm size 13x5mm^2 drill 1.2mm pad 2mm +0 +10 +5 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PTSM-0,5-5-HV-2.5-SMD_1x05-1MP_P2.50mm_Vertical +PhoenixContact PTSM0,5 5 HV 2,5mm vertical SMD spring clamp terminal block connector http://www.phoenixcontact.com/us/products/1778722/pdf +2.5mm vertical SMD spring clamp terminal block connector +0 +7 +6 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PTSM-0,5-6-2,5-V-SMD_1x06-1MP_P2.50mm_Vertical +PhoenixContact PTSM0,5 6 2,5mm vertical SMD spring clamp terminal block connector http://www.phoenixcontact.com/us/products/1814744/pdf +PhoenixContact PTSM0.5 6 2.5mm vertical SMD spring clamp terminal block connector +0 +8 +7 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PTSM-0,5-6-2.5-H-THR_1x06_P2.50mm_Horizontal +Terminal Block Phoenix PTSM-0,5-6-2.5-H-THR, 6 pins, pitch 2.5mm, size 17.2x10mm^2, drill diamater 1.2mm, pad diameter 3mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556441-da-01-de-LEITERPLATTENKL__PTSM_0_5__8_2_5_H_THR.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix PTSM-0,5-6-2.5-H-THR pitch 2.5mm size 17.2x10mm^2 drill 1.2mm pad 3mm +0 +12 +6 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PTSM-0,5-6-2.5-V-THR_1x06_P2.50mm_Vertical +Terminal Block Phoenix PTSM-0,5-6-2.5-V-THR, vertical (cable from top), 6 pins, pitch 2.5mm, size 15.5x5mm^2, drill diamater 1.2mm, pad diameter 2mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556444-da-01-de-LEITERPLATTENKL__PTSM_0_5__4_2_5_V_THR.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix PTSM-0,5-6-2.5-V-THR vertical pitch 2.5mm size 15.5x5mm^2 drill 1.2mm pad 2mm +0 +12 +6 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PTSM-0,5-6-HV-2.5-SMD_1x06-1MP_P2.50mm_Vertical +PhoenixContact PTSM0,5 6 HV 2,5mm vertical SMD spring clamp terminal block connector http://www.phoenixcontact.com/us/products/1778735/pdf +2.5mm vertical SMD spring clamp terminal block connector +0 +8 +7 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PTSM-0,5-7-2,5-V-SMD_1x07-1MP_P2.50mm_Vertical +PhoenixContact PTSM0,5 7 2,5mm vertical SMD spring clamp terminal block connector http://www.phoenixcontact.com/us/products/1814757/pdf +PhoenixContact PTSM0.5 7 2.5mm vertical SMD spring clamp terminal block connector +0 +9 +8 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PTSM-0,5-7-2.5-H-THR_1x07_P2.50mm_Horizontal +Terminal Block Phoenix PTSM-0,5-7-2.5-H-THR, 7 pins, pitch 2.5mm, size 19.7x10mm^2, drill diamater 1.2mm, pad diameter 3mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556441-da-01-de-LEITERPLATTENKL__PTSM_0_5__8_2_5_H_THR.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix PTSM-0,5-7-2.5-H-THR pitch 2.5mm size 19.7x10mm^2 drill 1.2mm pad 3mm +0 +14 +7 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PTSM-0,5-7-2.5-V-THR_1x07_P2.50mm_Vertical +Terminal Block Phoenix PTSM-0,5-7-2.5-V-THR, vertical (cable from top), 7 pins, pitch 2.5mm, size 18x5mm^2, drill diamater 1.2mm, pad diameter 2mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556444-da-01-de-LEITERPLATTENKL__PTSM_0_5__4_2_5_V_THR.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix PTSM-0,5-7-2.5-V-THR vertical pitch 2.5mm size 18x5mm^2 drill 1.2mm pad 2mm +0 +14 +7 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PTSM-0,5-7-HV-2.5-SMD_1x07-1MP_P2.50mm_Vertical +PhoenixContact PTSM0,5 7 HV 2,5mm vertical SMD spring clamp terminal block connector http://www.phoenixcontact.com/us/products/1778748/pdf +2.5mm vertical SMD spring clamp terminal block connector +0 +9 +8 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PTSM-0,5-8-2,5-V-SMD_1x08-1MP_P2.50mm_Vertical +PhoenixContact PTSM0,5 8 2,5mm vertical SMD spring clamp terminal block connector http://www.phoenixcontact.com/us/products/1814760/pdf +PhoenixContact PTSM0.5 8 2.5mm vertical SMD spring clamp terminal block connector +0 +10 +9 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PTSM-0,5-8-2.5-H-THR_1x08_P2.50mm_Horizontal +Terminal Block Phoenix PTSM-0,5-8-2.5-H-THR, 8 pins, pitch 2.5mm, size 22.2x10mm^2, drill diamater 1.2mm, pad diameter 3mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556441-da-01-de-LEITERPLATTENKL__PTSM_0_5__8_2_5_H_THR.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix PTSM-0,5-8-2.5-H-THR pitch 2.5mm size 22.2x10mm^2 drill 1.2mm pad 3mm +0 +16 +8 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PTSM-0,5-8-2.5-V-THR_1x08_P2.50mm_Vertical +Terminal Block Phoenix PTSM-0,5-8-2.5-V-THR, vertical (cable from top), 8 pins, pitch 2.5mm, size 20.5x5mm^2, drill diamater 1.2mm, pad diameter 2mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556444-da-01-de-LEITERPLATTENKL__PTSM_0_5__4_2_5_V_THR.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix +THT Terminal Block Phoenix PTSM-0,5-8-2.5-V-THR vertical pitch 2.5mm size 20.5x5mm^2 drill 1.2mm pad 2mm +0 +16 +8 +TerminalBlock_Phoenix +TerminalBlock_Phoenix_PTSM-0,5-8-HV-2.5-SMD_1x08-1MP_P2.50mm_Vertical +PhoenixContact PTSM0,5 8 HV 2,5mm vertical SMD spring clamp terminal block connector http://www.phoenixcontact.com/us/products/1778751/pdf +2.5mm vertical SMD spring clamp terminal block connector +0 +10 +9 +TerminalBlock_RND +TerminalBlock_RND_205-00001_1x02_P5.00mm_Horizontal +terminal block RND 205-00001, 2 pins, pitch 5mm, size 10x9mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00001 pitch 5mm size 10x9mm^2 drill 1.3mm pad 2.5mm +0 +2 +2 +TerminalBlock_RND +TerminalBlock_RND_205-00002_1x03_P5.00mm_Horizontal +terminal block RND 205-00002, 3 pins, pitch 5mm, size 15x9mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00002 pitch 5mm size 15x9mm^2 drill 1.3mm pad 2.5mm +0 +3 +3 +TerminalBlock_RND +TerminalBlock_RND_205-00003_1x04_P5.00mm_Horizontal +terminal block RND 205-00003, 4 pins, pitch 5mm, size 20x9mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00003 pitch 5mm size 20x9mm^2 drill 1.3mm pad 2.5mm +0 +4 +4 +TerminalBlock_RND +TerminalBlock_RND_205-00004_1x05_P5.00mm_Horizontal +terminal block RND 205-00004, 5 pins, pitch 5mm, size 25x9mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00004 pitch 5mm size 25x9mm^2 drill 1.3mm pad 2.5mm +0 +5 +5 +TerminalBlock_RND +TerminalBlock_RND_205-00005_1x06_P5.00mm_Horizontal +terminal block RND 205-00005, 6 pins, pitch 5mm, size 30x9mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00005 pitch 5mm size 30x9mm^2 drill 1.3mm pad 2.5mm +0 +6 +6 +TerminalBlock_RND +TerminalBlock_RND_205-00006_1x07_P5.00mm_Horizontal +terminal block RND 205-00006, 7 pins, pitch 5mm, size 35x9mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00006 pitch 5mm size 35x9mm^2 drill 1.3mm pad 2.5mm +0 +7 +7 +TerminalBlock_RND +TerminalBlock_RND_205-00007_1x08_P5.00mm_Horizontal +terminal block RND 205-00007, 8 pins, pitch 5mm, size 40x9mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00007 pitch 5mm size 40x9mm^2 drill 1.3mm pad 2.5mm +0 +8 +8 +TerminalBlock_RND +TerminalBlock_RND_205-00008_1x09_P5.00mm_Horizontal +terminal block RND 205-00008, 9 pins, pitch 5mm, size 45x9mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00008 pitch 5mm size 45x9mm^2 drill 1.3mm pad 2.5mm +0 +9 +9 +TerminalBlock_RND +TerminalBlock_RND_205-00009_1x10_P5.00mm_Horizontal +terminal block RND 205-00009, 10 pins, pitch 5mm, size 50x9mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00009 pitch 5mm size 50x9mm^2 drill 1.3mm pad 2.5mm +0 +10 +10 +TerminalBlock_RND +TerminalBlock_RND_205-00010_1x11_P5.00mm_Horizontal +terminal block RND 205-00010, 11 pins, pitch 5mm, size 55x9mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00010 pitch 5mm size 55x9mm^2 drill 1.3mm pad 2.5mm +0 +11 +11 +TerminalBlock_RND +TerminalBlock_RND_205-00011_1x12_P5.00mm_Horizontal +terminal block RND 205-00011, 12 pins, pitch 5mm, size 60x9mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00011 pitch 5mm size 60x9mm^2 drill 1.3mm pad 2.5mm +0 +12 +12 +TerminalBlock_RND +TerminalBlock_RND_205-00012_1x02_P5.00mm_Horizontal +terminal block RND 205-00012, 2 pins, pitch 5mm, size 10x7.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00012 pitch 5mm size 10x7.6mm^2 drill 1.3mm pad 2.5mm +0 +2 +2 +TerminalBlock_RND +TerminalBlock_RND_205-00013_1x03_P5.00mm_Horizontal +terminal block RND 205-00013, 3 pins, pitch 5mm, size 15x7.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00013 pitch 5mm size 15x7.6mm^2 drill 1.3mm pad 2.5mm +0 +3 +3 +TerminalBlock_RND +TerminalBlock_RND_205-00014_1x04_P5.00mm_Horizontal +terminal block RND 205-00014, 4 pins, pitch 5mm, size 20x7.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00014 pitch 5mm size 20x7.6mm^2 drill 1.3mm pad 2.5mm +0 +4 +4 +TerminalBlock_RND +TerminalBlock_RND_205-00015_1x05_P5.00mm_Horizontal +terminal block RND 205-00015, 5 pins, pitch 5mm, size 25x7.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00015 pitch 5mm size 25x7.6mm^2 drill 1.3mm pad 2.5mm +0 +5 +5 +TerminalBlock_RND +TerminalBlock_RND_205-00016_1x06_P5.00mm_Horizontal +terminal block RND 205-00016, 6 pins, pitch 5mm, size 30x7.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00016 pitch 5mm size 30x7.6mm^2 drill 1.3mm pad 2.5mm +0 +6 +6 +TerminalBlock_RND +TerminalBlock_RND_205-00017_1x07_P5.00mm_Horizontal +terminal block RND 205-00017, 7 pins, pitch 5mm, size 35x7.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00017 pitch 5mm size 35x7.6mm^2 drill 1.3mm pad 2.5mm +0 +7 +7 +TerminalBlock_RND +TerminalBlock_RND_205-00018_1x08_P5.00mm_Horizontal +terminal block RND 205-00018, 8 pins, pitch 5mm, size 40x7.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00018 pitch 5mm size 40x7.6mm^2 drill 1.3mm pad 2.5mm +0 +8 +8 +TerminalBlock_RND +TerminalBlock_RND_205-00019_1x09_P5.00mm_Horizontal +terminal block RND 205-00019, 9 pins, pitch 5mm, size 45x7.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00019 pitch 5mm size 45x7.6mm^2 drill 1.3mm pad 2.5mm +0 +9 +9 +TerminalBlock_RND +TerminalBlock_RND_205-00020_1x10_P5.00mm_Horizontal +terminal block RND 205-00020, 10 pins, pitch 5mm, size 50x7.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00020 pitch 5mm size 50x7.6mm^2 drill 1.3mm pad 2.5mm +0 +10 +10 +TerminalBlock_RND +TerminalBlock_RND_205-00021_1x11_P5.00mm_Horizontal +terminal block RND 205-00021, 11 pins, pitch 5mm, size 55x7.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00021 pitch 5mm size 55x7.6mm^2 drill 1.3mm pad 2.5mm +0 +11 +11 +TerminalBlock_RND +TerminalBlock_RND_205-00022_1x12_P5.00mm_Horizontal +terminal block RND 205-00022, 12 pins, pitch 5mm, size 60x7.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00022 pitch 5mm size 60x7.6mm^2 drill 1.3mm pad 2.5mm +0 +12 +12 +TerminalBlock_RND +TerminalBlock_RND_205-00023_1x02_P10.00mm_Horizontal +terminal block RND 205-00023, 2 pins, pitch 10mm, size 15x9mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00023 pitch 10mm size 15x9mm^2 drill 1.3mm pad 2.5mm +0 +2 +2 +TerminalBlock_RND +TerminalBlock_RND_205-00024_1x03_P10.00mm_Horizontal +terminal block RND 205-00024, 3 pins, pitch 10mm, size 25x9mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00024 pitch 10mm size 25x9mm^2 drill 1.3mm pad 2.5mm +0 +3 +3 +TerminalBlock_RND +TerminalBlock_RND_205-00025_1x04_P10.00mm_Horizontal +terminal block RND 205-00025, 4 pins, pitch 10mm, size 35x9mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00025 pitch 10mm size 35x9mm^2 drill 1.3mm pad 2.5mm +0 +4 +4 +TerminalBlock_RND +TerminalBlock_RND_205-00026_1x05_P10.00mm_Horizontal +terminal block RND 205-00026, 5 pins, pitch 10mm, size 45x9mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00026 pitch 10mm size 45x9mm^2 drill 1.3mm pad 2.5mm +0 +5 +5 +TerminalBlock_RND +TerminalBlock_RND_205-00027_1x06_P10.00mm_Horizontal +terminal block RND 205-00027, 6 pins, pitch 10mm, size 55x9mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00027 pitch 10mm size 55x9mm^2 drill 1.3mm pad 2.5mm +0 +6 +6 +TerminalBlock_RND +TerminalBlock_RND_205-00028_1x07_P10.00mm_Horizontal +terminal block RND 205-00028, 7 pins, pitch 10mm, size 65x9mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00028 pitch 10mm size 65x9mm^2 drill 1.3mm pad 2.5mm +0 +7 +7 +TerminalBlock_RND +TerminalBlock_RND_205-00029_1x08_P10.00mm_Horizontal +terminal block RND 205-00029, 8 pins, pitch 10mm, size 75x9mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00029 pitch 10mm size 75x9mm^2 drill 1.3mm pad 2.5mm +0 +8 +8 +TerminalBlock_RND +TerminalBlock_RND_205-00030_1x09_P10.00mm_Horizontal +terminal block RND 205-00030, 9 pins, pitch 10mm, size 85x9mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00030 pitch 10mm size 85x9mm^2 drill 1.3mm pad 2.5mm +0 +9 +9 +TerminalBlock_RND +TerminalBlock_RND_205-00031_1x10_P10.00mm_Horizontal +terminal block RND 205-00031, 10 pins, pitch 10mm, size 95x9mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00031 pitch 10mm size 95x9mm^2 drill 1.3mm pad 2.5mm +0 +10 +10 +TerminalBlock_RND +TerminalBlock_RND_205-00032_1x11_P10.00mm_Horizontal +terminal block RND 205-00032, 11 pins, pitch 10mm, size 105x9mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00032 pitch 10mm size 105x9mm^2 drill 1.3mm pad 2.5mm +0 +11 +11 +TerminalBlock_RND +TerminalBlock_RND_205-00033_1x12_P10.00mm_Horizontal +terminal block RND 205-00033, 12 pins, pitch 10mm, size 115x9mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00033 pitch 10mm size 115x9mm^2 drill 1.3mm pad 2.5mm +0 +12 +12 +TerminalBlock_RND +TerminalBlock_RND_205-00045_1x02_P5.00mm_Horizontal +terminal block RND 205-00045, 2 pins, pitch 5mm, size 10x8.1mm^2, drill diamater 1.1mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00045 pitch 5mm size 10x8.1mm^2 drill 1.1mm pad 2.1mm +0 +2 +2 +TerminalBlock_RND +TerminalBlock_RND_205-00046_1x03_P5.00mm_Horizontal +terminal block RND 205-00046, 3 pins, pitch 5mm, size 15x8.1mm^2, drill diamater 1.1mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00046 pitch 5mm size 15x8.1mm^2 drill 1.1mm pad 2.1mm +0 +3 +3 +TerminalBlock_RND +TerminalBlock_RND_205-00047_1x04_P5.00mm_Horizontal +terminal block RND 205-00047, 4 pins, pitch 5mm, size 20x8.1mm^2, drill diamater 1.1mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00047 pitch 5mm size 20x8.1mm^2 drill 1.1mm pad 2.1mm +0 +4 +4 +TerminalBlock_RND +TerminalBlock_RND_205-00048_1x05_P5.00mm_Horizontal +terminal block RND 205-00048, 5 pins, pitch 5mm, size 25x8.1mm^2, drill diamater 1.1mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00048 pitch 5mm size 25x8.1mm^2 drill 1.1mm pad 2.1mm +0 +5 +5 +TerminalBlock_RND +TerminalBlock_RND_205-00049_1x06_P5.00mm_Horizontal +terminal block RND 205-00049, 6 pins, pitch 5mm, size 30x8.1mm^2, drill diamater 1.1mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00049 pitch 5mm size 30x8.1mm^2 drill 1.1mm pad 2.1mm +0 +6 +6 +TerminalBlock_RND +TerminalBlock_RND_205-00050_1x07_P5.00mm_Horizontal +terminal block RND 205-00050, 7 pins, pitch 5mm, size 35x8.1mm^2, drill diamater 1.1mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00050 pitch 5mm size 35x8.1mm^2 drill 1.1mm pad 2.1mm +0 +7 +7 +TerminalBlock_RND +TerminalBlock_RND_205-00051_1x08_P5.00mm_Horizontal +terminal block RND 205-00051, 8 pins, pitch 5mm, size 40x8.1mm^2, drill diamater 1.1mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00051 pitch 5mm size 40x8.1mm^2 drill 1.1mm pad 2.1mm +0 +8 +8 +TerminalBlock_RND +TerminalBlock_RND_205-00052_1x09_P5.00mm_Horizontal +terminal block RND 205-00052, 9 pins, pitch 5mm, size 45x8.1mm^2, drill diamater 1.1mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00052 pitch 5mm size 45x8.1mm^2 drill 1.1mm pad 2.1mm +0 +9 +9 +TerminalBlock_RND +TerminalBlock_RND_205-00053_1x10_P5.00mm_Horizontal +terminal block RND 205-00053, 10 pins, pitch 5mm, size 50x8.1mm^2, drill diamater 1.1mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00053 pitch 5mm size 50x8.1mm^2 drill 1.1mm pad 2.1mm +0 +10 +10 +TerminalBlock_RND +TerminalBlock_RND_205-00054_1x11_P5.00mm_Horizontal +terminal block RND 205-00054, 11 pins, pitch 5mm, size 55x8.1mm^2, drill diamater 1.1mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00054 pitch 5mm size 55x8.1mm^2 drill 1.1mm pad 2.1mm +0 +11 +11 +TerminalBlock_RND +TerminalBlock_RND_205-00055_1x12_P5.00mm_Horizontal +terminal block RND 205-00055, 12 pins, pitch 5mm, size 60x8.1mm^2, drill diamater 1.1mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00045_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00055 pitch 5mm size 60x8.1mm^2 drill 1.1mm pad 2.1mm +0 +12 +12 +TerminalBlock_RND +TerminalBlock_RND_205-00056_1x02_P5.00mm_45Degree +terminal block RND 205-00056, 45Degree (cable under 45degree), 2 pins, pitch 5mm, size 10x12.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00056 45Degree pitch 5mm size 10x12.6mm^2 drill 1.3mm pad 2.5mm +0 +2 +2 +TerminalBlock_RND +TerminalBlock_RND_205-00057_1x03_P5.00mm_45Degree +terminal block RND 205-00057, 45Degree (cable under 45degree), 3 pins, pitch 5mm, size 15x12.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00057 45Degree pitch 5mm size 15x12.6mm^2 drill 1.3mm pad 2.5mm +0 +3 +3 +TerminalBlock_RND +TerminalBlock_RND_205-00058_1x04_P5.00mm_45Degree +terminal block RND 205-00058, 45Degree (cable under 45degree), 4 pins, pitch 5mm, size 20x12.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00058 45Degree pitch 5mm size 20x12.6mm^2 drill 1.3mm pad 2.5mm +0 +4 +4 +TerminalBlock_RND +TerminalBlock_RND_205-00059_1x05_P5.00mm_45Degree +terminal block RND 205-00059, 45Degree (cable under 45degree), 5 pins, pitch 5mm, size 25x12.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00059 45Degree pitch 5mm size 25x12.6mm^2 drill 1.3mm pad 2.5mm +0 +5 +5 +TerminalBlock_RND +TerminalBlock_RND_205-00060_1x06_P5.00mm_45Degree +terminal block RND 205-00060, 45Degree (cable under 45degree), 6 pins, pitch 5mm, size 30x12.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00060 45Degree pitch 5mm size 30x12.6mm^2 drill 1.3mm pad 2.5mm +0 +6 +6 +TerminalBlock_RND +TerminalBlock_RND_205-00061_1x07_P5.00mm_45Degree +terminal block RND 205-00061, 45Degree (cable under 45degree), 7 pins, pitch 5mm, size 35x12.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00061 45Degree pitch 5mm size 35x12.6mm^2 drill 1.3mm pad 2.5mm +0 +7 +7 +TerminalBlock_RND +TerminalBlock_RND_205-00062_1x08_P5.00mm_45Degree +terminal block RND 205-00062, 45Degree (cable under 45degree), 8 pins, pitch 5mm, size 40x12.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00062 45Degree pitch 5mm size 40x12.6mm^2 drill 1.3mm pad 2.5mm +0 +8 +8 +TerminalBlock_RND +TerminalBlock_RND_205-00063_1x09_P5.00mm_45Degree +terminal block RND 205-00063, 45Degree (cable under 45degree), 9 pins, pitch 5mm, size 45x12.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00063 45Degree pitch 5mm size 45x12.6mm^2 drill 1.3mm pad 2.5mm +0 +9 +9 +TerminalBlock_RND +TerminalBlock_RND_205-00064_1x10_P5.00mm_45Degree +terminal block RND 205-00064, 45Degree (cable under 45degree), 10 pins, pitch 5mm, size 50x12.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00064 45Degree pitch 5mm size 50x12.6mm^2 drill 1.3mm pad 2.5mm +0 +10 +10 +TerminalBlock_RND +TerminalBlock_RND_205-00065_1x11_P5.00mm_45Degree +terminal block RND 205-00065, 45Degree (cable under 45degree), 11 pins, pitch 5mm, size 55x12.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00065 45Degree pitch 5mm size 55x12.6mm^2 drill 1.3mm pad 2.5mm +0 +11 +11 +TerminalBlock_RND +TerminalBlock_RND_205-00066_1x12_P5.00mm_45Degree +terminal block RND 205-00066, 45Degree (cable under 45degree), 12 pins, pitch 5mm, size 60x12.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00066 45Degree pitch 5mm size 60x12.6mm^2 drill 1.3mm pad 2.5mm +0 +12 +12 +TerminalBlock_RND +TerminalBlock_RND_205-00067_1x02_P7.50mm_Horizontal +terminal block RND 205-00067, 2 pins, pitch 7.5mm, size 15x10.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00067 pitch 7.5mm size 15x10.3mm^2 drill 1.3mm pad 2.5mm +0 +2 +2 +TerminalBlock_RND +TerminalBlock_RND_205-00068_1x03_P7.50mm_Horizontal +terminal block RND 205-00068, 3 pins, pitch 7.5mm, size 22.5x10.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00068 pitch 7.5mm size 22.5x10.3mm^2 drill 1.3mm pad 2.5mm +0 +3 +3 +TerminalBlock_RND +TerminalBlock_RND_205-00069_1x04_P7.50mm_Horizontal +terminal block RND 205-00069, 4 pins, pitch 7.5mm, size 30x10.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00069 pitch 7.5mm size 30x10.3mm^2 drill 1.3mm pad 2.5mm +0 +4 +4 +TerminalBlock_RND +TerminalBlock_RND_205-00070_1x05_P7.50mm_Horizontal +terminal block RND 205-00070, 5 pins, pitch 7.5mm, size 37.5x10.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00070 pitch 7.5mm size 37.5x10.3mm^2 drill 1.3mm pad 2.5mm +0 +5 +5 +TerminalBlock_RND +TerminalBlock_RND_205-00071_1x06_P7.50mm_Horizontal +terminal block RND 205-00071, 6 pins, pitch 7.5mm, size 45x10.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00071 pitch 7.5mm size 45x10.3mm^2 drill 1.3mm pad 2.5mm +0 +6 +6 +TerminalBlock_RND +TerminalBlock_RND_205-00072_1x07_P7.50mm_Horizontal +terminal block RND 205-00072, 7 pins, pitch 7.5mm, size 52.5x10.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00072 pitch 7.5mm size 52.5x10.3mm^2 drill 1.3mm pad 2.5mm +0 +7 +7 +TerminalBlock_RND +TerminalBlock_RND_205-00073_1x08_P7.50mm_Horizontal +terminal block RND 205-00073, 8 pins, pitch 7.5mm, size 60x10.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00073 pitch 7.5mm size 60x10.3mm^2 drill 1.3mm pad 2.5mm +0 +8 +8 +TerminalBlock_RND +TerminalBlock_RND_205-00074_1x09_P7.50mm_Horizontal +terminal block RND 205-00074, 9 pins, pitch 7.5mm, size 67.5x10.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00074 pitch 7.5mm size 67.5x10.3mm^2 drill 1.3mm pad 2.5mm +0 +9 +9 +TerminalBlock_RND +TerminalBlock_RND_205-00075_1x10_P7.50mm_Horizontal +terminal block RND 205-00075, 10 pins, pitch 7.5mm, size 75x10.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00075 pitch 7.5mm size 75x10.3mm^2 drill 1.3mm pad 2.5mm +0 +10 +10 +TerminalBlock_RND +TerminalBlock_RND_205-00076_1x11_P7.50mm_Horizontal +terminal block RND 205-00076, 11 pins, pitch 7.5mm, size 82.5x10.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00076 pitch 7.5mm size 82.5x10.3mm^2 drill 1.3mm pad 2.5mm +0 +11 +11 +TerminalBlock_RND +TerminalBlock_RND_205-00077_1x12_P7.50mm_Horizontal +terminal block RND 205-00077, 12 pins, pitch 7.5mm, size 90x10.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00077 pitch 7.5mm size 90x10.3mm^2 drill 1.3mm pad 2.5mm +0 +12 +12 +TerminalBlock_RND +TerminalBlock_RND_205-00078_1x02_P10.00mm_Horizontal +terminal block RND 205-00078, 2 pins, pitch 10mm, size 15x10.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00078 pitch 10mm size 15x10.3mm^2 drill 1.3mm pad 2.5mm +0 +2 +2 +TerminalBlock_RND +TerminalBlock_RND_205-00079_1x03_P10.00mm_Horizontal +terminal block RND 205-00079, 3 pins, pitch 10mm, size 25x10.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00079 pitch 10mm size 25x10.3mm^2 drill 1.3mm pad 2.5mm +0 +3 +3 +TerminalBlock_RND +TerminalBlock_RND_205-00080_1x04_P10.00mm_Horizontal +terminal block RND 205-00080, 4 pins, pitch 10mm, size 35x10.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00080 pitch 10mm size 35x10.3mm^2 drill 1.3mm pad 2.5mm +0 +4 +4 +TerminalBlock_RND +TerminalBlock_RND_205-00081_1x05_P10.00mm_Horizontal +terminal block RND 205-00081, 5 pins, pitch 10mm, size 45x10.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00081 pitch 10mm size 45x10.3mm^2 drill 1.3mm pad 2.5mm +0 +5 +5 +TerminalBlock_RND +TerminalBlock_RND_205-00082_1x06_P10.00mm_Horizontal +terminal block RND 205-00082, 6 pins, pitch 10mm, size 55x10.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00082 pitch 10mm size 55x10.3mm^2 drill 1.3mm pad 2.5mm +0 +6 +6 +TerminalBlock_RND +TerminalBlock_RND_205-00083_1x07_P10.00mm_Horizontal +terminal block RND 205-00083, 7 pins, pitch 10mm, size 65x10.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00083 pitch 10mm size 65x10.3mm^2 drill 1.3mm pad 2.5mm +0 +7 +7 +TerminalBlock_RND +TerminalBlock_RND_205-00084_1x08_P10.00mm_Horizontal +terminal block RND 205-00084, 8 pins, pitch 10mm, size 75x10.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00084 pitch 10mm size 75x10.3mm^2 drill 1.3mm pad 2.5mm +0 +8 +8 +TerminalBlock_RND +TerminalBlock_RND_205-00085_1x09_P10.00mm_Horizontal +terminal block RND 205-00085, 9 pins, pitch 10mm, size 85x10.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00085 pitch 10mm size 85x10.3mm^2 drill 1.3mm pad 2.5mm +0 +9 +9 +TerminalBlock_RND +TerminalBlock_RND_205-00086_1x10_P10.00mm_Horizontal +terminal block RND 205-00086, 10 pins, pitch 10mm, size 95x10.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00086 pitch 10mm size 95x10.3mm^2 drill 1.3mm pad 2.5mm +0 +10 +10 +TerminalBlock_RND +TerminalBlock_RND_205-00087_1x11_P10.00mm_Horizontal +terminal block RND 205-00087, 11 pins, pitch 10mm, size 105x10.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00087 pitch 10mm size 105x10.3mm^2 drill 1.3mm pad 2.5mm +0 +11 +11 +TerminalBlock_RND +TerminalBlock_RND_205-00088_1x12_P10.00mm_Horizontal +terminal block RND 205-00088, 12 pins, pitch 10mm, size 115x10.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00088 pitch 10mm size 115x10.3mm^2 drill 1.3mm pad 2.5mm +0 +12 +12 +TerminalBlock_RND +TerminalBlock_RND_205-00232_1x02_P5.08mm_Horizontal +terminal block RND 205-00232, 2 pins, pitch 5.08mm, size 10.2x8.45mm^2, drill diamater 1.1mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00232 pitch 5.08mm size 10.2x8.45mm^2 drill 1.1mm pad 2.1mm +0 +2 +2 +TerminalBlock_RND +TerminalBlock_RND_205-00233_1x03_P5.08mm_Horizontal +terminal block RND 205-00233, 3 pins, pitch 5.08mm, size 15.2x8.45mm^2, drill diamater 1.1mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00233 pitch 5.08mm size 15.2x8.45mm^2 drill 1.1mm pad 2.1mm +0 +3 +3 +TerminalBlock_RND +TerminalBlock_RND_205-00234_1x04_P5.08mm_Horizontal +terminal block RND 205-00234, 4 pins, pitch 5.08mm, size 20.3x8.45mm^2, drill diamater 1.1mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00234 pitch 5.08mm size 20.3x8.45mm^2 drill 1.1mm pad 2.1mm +0 +4 +4 +TerminalBlock_RND +TerminalBlock_RND_205-00235_1x05_P5.08mm_Horizontal +terminal block RND 205-00235, 5 pins, pitch 5.08mm, size 25.4x8.45mm^2, drill diamater 1.1mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00235 pitch 5.08mm size 25.4x8.45mm^2 drill 1.1mm pad 2.1mm +0 +5 +5 +TerminalBlock_RND +TerminalBlock_RND_205-00236_1x06_P5.08mm_Horizontal +terminal block RND 205-00236, 6 pins, pitch 5.08mm, size 30.5x8.45mm^2, drill diamater 1.1mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00236 pitch 5.08mm size 30.5x8.45mm^2 drill 1.1mm pad 2.1mm +0 +6 +6 +TerminalBlock_RND +TerminalBlock_RND_205-00237_1x07_P5.08mm_Horizontal +terminal block RND 205-00237, 7 pins, pitch 5.08mm, size 35.6x8.45mm^2, drill diamater 1.1mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00237 pitch 5.08mm size 35.6x8.45mm^2 drill 1.1mm pad 2.1mm +0 +7 +7 +TerminalBlock_RND +TerminalBlock_RND_205-00238_1x08_P5.08mm_Horizontal +terminal block RND 205-00238, 8 pins, pitch 5.08mm, size 40.6x8.45mm^2, drill diamater 1.1mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00238 pitch 5.08mm size 40.6x8.45mm^2 drill 1.1mm pad 2.1mm +0 +8 +8 +TerminalBlock_RND +TerminalBlock_RND_205-00239_1x09_P5.08mm_Horizontal +terminal block RND 205-00239, 9 pins, pitch 5.08mm, size 45.7x8.45mm^2, drill diamater 1.1mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00239 pitch 5.08mm size 45.7x8.45mm^2 drill 1.1mm pad 2.1mm +0 +9 +9 +TerminalBlock_RND +TerminalBlock_RND_205-00240_1x10_P5.08mm_Horizontal +terminal block RND 205-00240, 10 pins, pitch 5.08mm, size 50.8x8.45mm^2, drill diamater 1.1mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00240 pitch 5.08mm size 50.8x8.45mm^2 drill 1.1mm pad 2.1mm +0 +10 +10 +TerminalBlock_RND +TerminalBlock_RND_205-00241_1x02_P10.16mm_Horizontal +terminal block RND 205-00241, 2 pins, pitch 10.2mm, size 15.2x8.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00241 pitch 10.2mm size 15.2x8.3mm^2 drill 1.3mm pad 2.5mm +0 +2 +2 +TerminalBlock_RND +TerminalBlock_RND_205-00242_1x03_P10.16mm_Horizontal +terminal block RND 205-00242, 3 pins, pitch 10.2mm, size 25.4x8.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00242 pitch 10.2mm size 25.4x8.3mm^2 drill 1.3mm pad 2.5mm +0 +3 +3 +TerminalBlock_RND +TerminalBlock_RND_205-00243_1x04_P10.16mm_Horizontal +terminal block RND 205-00243, 4 pins, pitch 10.2mm, size 35.6x8.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00243 pitch 10.2mm size 35.6x8.3mm^2 drill 1.3mm pad 2.5mm +0 +4 +4 +TerminalBlock_RND +TerminalBlock_RND_205-00244_1x05_P10.16mm_Horizontal +terminal block RND 205-00244, 5 pins, pitch 10.2mm, size 45.7x8.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00244 pitch 10.2mm size 45.7x8.3mm^2 drill 1.3mm pad 2.5mm +0 +5 +5 +TerminalBlock_RND +TerminalBlock_RND_205-00245_1x06_P10.16mm_Horizontal +terminal block RND 205-00245, 6 pins, pitch 10.2mm, size 55.9x8.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00245 pitch 10.2mm size 55.9x8.3mm^2 drill 1.3mm pad 2.5mm +0 +6 +6 +TerminalBlock_RND +TerminalBlock_RND_205-00246_1x07_P10.16mm_Horizontal +terminal block RND 205-00246, 7 pins, pitch 10.2mm, size 66x8.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00246 pitch 10.2mm size 66x8.3mm^2 drill 1.3mm pad 2.5mm +0 +7 +7 +TerminalBlock_RND +TerminalBlock_RND_205-00247_1x08_P10.16mm_Horizontal +terminal block RND 205-00247, 8 pins, pitch 10.2mm, size 76.2x8.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00247 pitch 10.2mm size 76.2x8.3mm^2 drill 1.3mm pad 2.5mm +0 +8 +8 +TerminalBlock_RND +TerminalBlock_RND_205-00248_1x09_P10.16mm_Horizontal +terminal block RND 205-00248, 9 pins, pitch 10.2mm, size 86.4x8.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00248 pitch 10.2mm size 86.4x8.3mm^2 drill 1.3mm pad 2.5mm +0 +9 +9 +TerminalBlock_RND +TerminalBlock_RND_205-00249_1x10_P10.16mm_Horizontal +terminal block RND 205-00249, 10 pins, pitch 10.2mm, size 96.5x8.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00249 pitch 10.2mm size 96.5x8.3mm^2 drill 1.3mm pad 2.5mm +0 +10 +10 +TerminalBlock_RND +TerminalBlock_RND_205-00250_1x11_P10.16mm_Horizontal +terminal block RND 205-00250, 11 pins, pitch 10.2mm, size 107x8.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00250 pitch 10.2mm size 107x8.3mm^2 drill 1.3mm pad 2.5mm +0 +11 +11 +TerminalBlock_RND +TerminalBlock_RND_205-00251_1x12_P10.16mm_Horizontal +terminal block RND 205-00251, 12 pins, pitch 10.2mm, size 117x8.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00251 pitch 10.2mm size 117x8.3mm^2 drill 1.3mm pad 2.5mm +0 +12 +12 +TerminalBlock_RND +TerminalBlock_RND_205-00276_1x02_P5.00mm_Vertical +terminal block RND 205-00078, vertical (cable from top), 2 pins, pitch 5mm, size 10x10mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00078 vertical pitch 5mm size 10x10mm^2 drill 1.3mm pad 2.5mm +0 +2 +2 +TerminalBlock_RND +TerminalBlock_RND_205-00277_1x03_P5.00mm_Vertical +terminal block RND 205-00079, vertical (cable from top), 3 pins, pitch 5mm, size 15x10mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00079 vertical pitch 5mm size 15x10mm^2 drill 1.3mm pad 2.5mm +0 +3 +3 +TerminalBlock_RND +TerminalBlock_RND_205-00278_1x04_P5.00mm_Vertical +terminal block RND 205-00080, vertical (cable from top), 4 pins, pitch 5mm, size 20x10mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00080 vertical pitch 5mm size 20x10mm^2 drill 1.3mm pad 2.5mm +0 +4 +4 +TerminalBlock_RND +TerminalBlock_RND_205-00279_1x05_P5.00mm_Vertical +terminal block RND 205-00081, vertical (cable from top), 5 pins, pitch 5mm, size 25x10mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00081 vertical pitch 5mm size 25x10mm^2 drill 1.3mm pad 2.5mm +0 +5 +5 +TerminalBlock_RND +TerminalBlock_RND_205-00280_1x06_P5.00mm_Vertical +terminal block RND 205-00082, vertical (cable from top), 6 pins, pitch 5mm, size 30x10mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00082 vertical pitch 5mm size 30x10mm^2 drill 1.3mm pad 2.5mm +0 +6 +6 +TerminalBlock_RND +TerminalBlock_RND_205-00281_1x07_P5.00mm_Vertical +terminal block RND 205-00083, vertical (cable from top), 7 pins, pitch 5mm, size 35x10mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00083 vertical pitch 5mm size 35x10mm^2 drill 1.3mm pad 2.5mm +0 +7 +7 +TerminalBlock_RND +TerminalBlock_RND_205-00282_1x08_P5.00mm_Vertical +terminal block RND 205-00084, vertical (cable from top), 8 pins, pitch 5mm, size 40x10mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00084 vertical pitch 5mm size 40x10mm^2 drill 1.3mm pad 2.5mm +0 +8 +8 +TerminalBlock_RND +TerminalBlock_RND_205-00283_1x09_P5.00mm_Vertical +terminal block RND 205-00085, vertical (cable from top), 9 pins, pitch 5mm, size 45x10mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00085 vertical pitch 5mm size 45x10mm^2 drill 1.3mm pad 2.5mm +0 +9 +9 +TerminalBlock_RND +TerminalBlock_RND_205-00284_1x10_P5.00mm_Vertical +terminal block RND 205-00086, vertical (cable from top), 10 pins, pitch 5mm, size 50x10mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00086 vertical pitch 5mm size 50x10mm^2 drill 1.3mm pad 2.5mm +0 +10 +10 +TerminalBlock_RND +TerminalBlock_RND_205-00285_1x11_P5.00mm_Vertical +terminal block RND 205-00087, vertical (cable from top), 11 pins, pitch 5mm, size 55x10mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00087 vertical pitch 5mm size 55x10mm^2 drill 1.3mm pad 2.5mm +0 +11 +11 +TerminalBlock_RND +TerminalBlock_RND_205-00286_1x12_P5.00mm_Vertical +terminal block RND 205-00088, vertical (cable from top), 12 pins, pitch 5mm, size 60x10mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00088 vertical pitch 5mm size 60x10mm^2 drill 1.3mm pad 2.5mm +0 +12 +12 +TerminalBlock_RND +TerminalBlock_RND_205-00287_1x02_P5.08mm_Horizontal +terminal block RND 205-00287, 2 pins, pitch 5.08mm, size 10.2x10.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00287 pitch 5.08mm size 10.2x10.6mm^2 drill 1.3mm pad 2.5mm +0 +2 +2 +TerminalBlock_RND +TerminalBlock_RND_205-00288_1x03_P5.08mm_Horizontal +terminal block RND 205-00288, 3 pins, pitch 5.08mm, size 15.2x10.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00288 pitch 5.08mm size 15.2x10.6mm^2 drill 1.3mm pad 2.5mm +0 +3 +3 +TerminalBlock_RND +TerminalBlock_RND_205-00289_1x04_P5.08mm_Horizontal +terminal block RND 205-00289, 4 pins, pitch 5.08mm, size 20.3x10.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00289 pitch 5.08mm size 20.3x10.6mm^2 drill 1.3mm pad 2.5mm +0 +4 +4 +TerminalBlock_RND +TerminalBlock_RND_205-00290_1x05_P5.08mm_Horizontal +terminal block RND 205-00290, 5 pins, pitch 5.08mm, size 25.4x10.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00290 pitch 5.08mm size 25.4x10.6mm^2 drill 1.3mm pad 2.5mm +0 +5 +5 +TerminalBlock_RND +TerminalBlock_RND_205-00291_1x06_P5.08mm_Horizontal +terminal block RND 205-00291, 6 pins, pitch 5.08mm, size 30.5x10.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00291 pitch 5.08mm size 30.5x10.6mm^2 drill 1.3mm pad 2.5mm +0 +6 +6 +TerminalBlock_RND +TerminalBlock_RND_205-00292_1x07_P5.08mm_Horizontal +terminal block RND 205-00292, 7 pins, pitch 5.08mm, size 35.6x10.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00292 pitch 5.08mm size 35.6x10.6mm^2 drill 1.3mm pad 2.5mm +0 +7 +7 +TerminalBlock_RND +TerminalBlock_RND_205-00293_1x08_P5.08mm_Horizontal +terminal block RND 205-00293, 8 pins, pitch 5.08mm, size 40.6x10.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00293 pitch 5.08mm size 40.6x10.6mm^2 drill 1.3mm pad 2.5mm +0 +8 +8 +TerminalBlock_RND +TerminalBlock_RND_205-00294_1x09_P5.08mm_Horizontal +terminal block RND 205-00294, 9 pins, pitch 5.08mm, size 45.7x10.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00294 pitch 5.08mm size 45.7x10.6mm^2 drill 1.3mm pad 2.5mm +0 +9 +9 +TerminalBlock_RND +TerminalBlock_RND_205-00295_1x10_P5.08mm_Horizontal +terminal block RND 205-00295, 10 pins, pitch 5.08mm, size 50.8x10.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00295 pitch 5.08mm size 50.8x10.6mm^2 drill 1.3mm pad 2.5mm +0 +10 +10 +TerminalBlock_RND +TerminalBlock_RND_205-00296_1x11_P5.08mm_Horizontal +terminal block RND 205-00296, 11 pins, pitch 5.08mm, size 55.9x10.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00296 pitch 5.08mm size 55.9x10.6mm^2 drill 1.3mm pad 2.5mm +0 +11 +11 +TerminalBlock_RND +TerminalBlock_RND_205-00297_1x12_P5.08mm_Horizontal +terminal block RND 205-00297, 12 pins, pitch 5.08mm, size 61x10.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00297 pitch 5.08mm size 61x10.6mm^2 drill 1.3mm pad 2.5mm +0 +12 +12 +TerminalBlock_RND +TerminalBlock_RND_205-00298_1x02_P10.00mm_Horizontal +terminal block RND 205-00298, 2 pins, pitch 10mm, size 15x8.1mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00298 pitch 10mm size 15x8.1mm^2 drill 1.3mm pad 2.5mm +0 +2 +2 +TerminalBlock_RND +TerminalBlock_RND_205-00299_1x03_P10.00mm_Horizontal +terminal block RND 205-00299, 3 pins, pitch 10mm, size 25x8.1mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00299 pitch 10mm size 25x8.1mm^2 drill 1.3mm pad 2.5mm +0 +3 +3 +TerminalBlock_RND +TerminalBlock_RND_205-00300_1x04_P10.00mm_Horizontal +terminal block RND 205-00300, 4 pins, pitch 10mm, size 35x8.1mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00300 pitch 10mm size 35x8.1mm^2 drill 1.3mm pad 2.5mm +0 +4 +4 +TerminalBlock_RND +TerminalBlock_RND_205-00301_1x05_P10.00mm_Horizontal +terminal block RND 205-00301, 5 pins, pitch 10mm, size 45x8.1mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00301 pitch 10mm size 45x8.1mm^2 drill 1.3mm pad 2.5mm +0 +5 +5 +TerminalBlock_RND +TerminalBlock_RND_205-00302_1x06_P10.00mm_Horizontal +terminal block RND 205-00302, 6 pins, pitch 10mm, size 55x8.1mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00302 pitch 10mm size 55x8.1mm^2 drill 1.3mm pad 2.5mm +0 +6 +6 +TerminalBlock_RND +TerminalBlock_RND_205-00303_1x07_P10.00mm_Horizontal +terminal block RND 205-00303, 7 pins, pitch 10mm, size 65x8.1mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00303 pitch 10mm size 65x8.1mm^2 drill 1.3mm pad 2.5mm +0 +7 +7 +TerminalBlock_RND +TerminalBlock_RND_205-00304_1x08_P10.00mm_Horizontal +terminal block RND 205-00304, 8 pins, pitch 10mm, size 75x8.1mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00304 pitch 10mm size 75x8.1mm^2 drill 1.3mm pad 2.5mm +0 +8 +8 +TerminalBlock_RND +TerminalBlock_RND_205-00305_1x09_P10.00mm_Horizontal +terminal block RND 205-00305, 9 pins, pitch 10mm, size 85x8.1mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00305 pitch 10mm size 85x8.1mm^2 drill 1.3mm pad 2.5mm +0 +9 +9 +TerminalBlock_RND +TerminalBlock_RND_205-00306_1x10_P10.00mm_Horizontal +terminal block RND 205-00306, 10 pins, pitch 10mm, size 95x8.1mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00306 pitch 10mm size 95x8.1mm^2 drill 1.3mm pad 2.5mm +0 +10 +10 +TerminalBlock_RND +TerminalBlock_RND_205-00307_1x11_P10.00mm_Horizontal +terminal block RND 205-00307, 11 pins, pitch 10mm, size 105x8.1mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00307 pitch 10mm size 105x8.1mm^2 drill 1.3mm pad 2.5mm +0 +11 +11 +TerminalBlock_RND +TerminalBlock_RND_205-00308_1x12_P10.00mm_Horizontal +terminal block RND 205-00308, 12 pins, pitch 10mm, size 115x8.1mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND +THT terminal block RND 205-00308 pitch 10mm size 115x8.1mm^2 drill 1.3mm pad 2.5mm +0 +12 +12 +TerminalBlock_TE-Connectivity +TerminalBlock_TE_1-282834-0_1x10_P2.54mm_Horizontal +Terminal Block TE 1-282834-0, 10 pins, pitch 2.54mm, size 25.86x6.5mm^2, drill diamater 1.1mm, pad diameter 2.1mm, see http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F282834%7FC1%7Fpdf%7FEnglish%7FENG_CD_282834_C1.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity +THT Terminal Block TE 1-282834-0 pitch 2.54mm size 25.86x6.5mm^2 drill 1.1mm pad 2.1mm +0 +10 +10 +TerminalBlock_TE-Connectivity +TerminalBlock_TE_1-282834-1_1x11_P2.54mm_Horizontal +Terminal Block TE 1-282834-1, 11 pins, pitch 2.54mm, size 28.4x6.5mm^2, drill diamater 1.1mm, pad diameter 2.1mm, see http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F282834%7FC1%7Fpdf%7FEnglish%7FENG_CD_282834_C1.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity +THT Terminal Block TE 1-282834-1 pitch 2.54mm size 28.4x6.5mm^2 drill 1.1mm pad 2.1mm +0 +11 +11 +TerminalBlock_TE-Connectivity +TerminalBlock_TE_1-282834-2_1x12_P2.54mm_Horizontal +Terminal Block TE 1-282834-2, 12 pins, pitch 2.54mm, size 30.94x6.5mm^2, drill diamater 1.1mm, pad diameter 2.1mm, see http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F282834%7FC1%7Fpdf%7FEnglish%7FENG_CD_282834_C1.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity +THT Terminal Block TE 1-282834-2 pitch 2.54mm size 30.94x6.5mm^2 drill 1.1mm pad 2.1mm +0 +12 +12 +TerminalBlock_TE-Connectivity +TerminalBlock_TE_282834-2_1x02_P2.54mm_Horizontal +Terminal Block TE 282834-2, 2 pins, pitch 2.54mm, size 5.54x6.5mm^2, drill diamater 1.1mm, pad diameter 2.1mm, see http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F282834%7FC1%7Fpdf%7FEnglish%7FENG_CD_282834_C1.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity +THT Terminal Block TE 282834-2 pitch 2.54mm size 5.54x6.5mm^2 drill 1.1mm pad 2.1mm +0 +2 +2 +TerminalBlock_TE-Connectivity +TerminalBlock_TE_282834-3_1x03_P2.54mm_Horizontal +Terminal Block TE 282834-3, 3 pins, pitch 2.54mm, size 8.08x6.5mm^2, drill diamater 1.1mm, pad diameter 2.1mm, see http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F282834%7FC1%7Fpdf%7FEnglish%7FENG_CD_282834_C1.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity +THT Terminal Block TE 282834-3 pitch 2.54mm size 8.08x6.5mm^2 drill 1.1mm pad 2.1mm +0 +3 +3 +TerminalBlock_TE-Connectivity +TerminalBlock_TE_282834-4_1x04_P2.54mm_Horizontal +Terminal Block TE 282834-4, 4 pins, pitch 2.54mm, size 10.620000000000001x6.5mm^2, drill diamater 1.1mm, pad diameter 2.1mm, see http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F282834%7FC1%7Fpdf%7FEnglish%7FENG_CD_282834_C1.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity +THT Terminal Block TE 282834-4 pitch 2.54mm size 10.620000000000001x6.5mm^2 drill 1.1mm pad 2.1mm +0 +4 +4 +TerminalBlock_TE-Connectivity +TerminalBlock_TE_282834-5_1x05_P2.54mm_Horizontal +Terminal Block TE 282834-5, 5 pins, pitch 2.54mm, size 13.16x6.5mm^2, drill diamater 1.1mm, pad diameter 2.1mm, see http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F282834%7FC1%7Fpdf%7FEnglish%7FENG_CD_282834_C1.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity +THT Terminal Block TE 282834-5 pitch 2.54mm size 13.16x6.5mm^2 drill 1.1mm pad 2.1mm +0 +5 +5 +TerminalBlock_TE-Connectivity +TerminalBlock_TE_282834-6_1x06_P2.54mm_Horizontal +Terminal Block TE 282834-6, 6 pins, pitch 2.54mm, size 15.7x6.5mm^2, drill diamater 1.1mm, pad diameter 2.1mm, see http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F282834%7FC1%7Fpdf%7FEnglish%7FENG_CD_282834_C1.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity +THT Terminal Block TE 282834-6 pitch 2.54mm size 15.7x6.5mm^2 drill 1.1mm pad 2.1mm +0 +6 +6 +TerminalBlock_TE-Connectivity +TerminalBlock_TE_282834-7_1x07_P2.54mm_Horizontal +Terminal Block TE 282834-7, 7 pins, pitch 2.54mm, size 18.240000000000002x6.5mm^2, drill diamater 1.1mm, pad diameter 2.1mm, see http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F282834%7FC1%7Fpdf%7FEnglish%7FENG_CD_282834_C1.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity +THT Terminal Block TE 282834-7 pitch 2.54mm size 18.240000000000002x6.5mm^2 drill 1.1mm pad 2.1mm +0 +7 +7 +TerminalBlock_TE-Connectivity +TerminalBlock_TE_282834-8_1x08_P2.54mm_Horizontal +Terminal Block TE 282834-8, 8 pins, pitch 2.54mm, size 20.78x6.5mm^2, drill diamater 1.1mm, pad diameter 2.1mm, see http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F282834%7FC1%7Fpdf%7FEnglish%7FENG_CD_282834_C1.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity +THT Terminal Block TE 282834-8 pitch 2.54mm size 20.78x6.5mm^2 drill 1.1mm pad 2.1mm +0 +8 +8 +TerminalBlock_TE-Connectivity +TerminalBlock_TE_282834-9_1x09_P2.54mm_Horizontal +Terminal Block TE 282834-9, 9 pins, pitch 2.54mm, size 23.32x6.5mm^2, drill diamater 1.1mm, pad diameter 2.1mm, see http://www.te.com/commerce/DocumentDelivery/DDEController?Action=showdoc&DocId=Customer+Drawing%7F282834%7FC1%7Fpdf%7FEnglish%7FENG_CD_282834_C1.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity +THT Terminal Block TE 282834-9 pitch 2.54mm size 23.32x6.5mm^2 drill 1.1mm pad 2.1mm +0 +9 +9 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-101_1x01_P5.00mm_45Degree +Terminal Block WAGO 236-101, 45Degree (cable under 45degree), 1 pins, pitch 5mm, size 7.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-101 45Degree pitch 5mm size 7.3x14mm^2 drill 1.15mm pad 3mm +0 +1 +1 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-102_1x02_P5.00mm_45Degree +Terminal Block WAGO 236-102, 45Degree (cable under 45degree), 2 pins, pitch 5mm, size 12.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-102 45Degree pitch 5mm size 12.3x14mm^2 drill 1.15mm pad 3mm +0 +2 +2 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-103_1x03_P5.00mm_45Degree +Terminal Block WAGO 236-103, 45Degree (cable under 45degree), 3 pins, pitch 5mm, size 17.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-103 45Degree pitch 5mm size 17.3x14mm^2 drill 1.15mm pad 3mm +0 +3 +3 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-104_1x04_P5.00mm_45Degree +Terminal Block WAGO 236-104, 45Degree (cable under 45degree), 4 pins, pitch 5mm, size 22.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-104 45Degree pitch 5mm size 22.3x14mm^2 drill 1.15mm pad 3mm +0 +4 +4 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-105_1x05_P5.00mm_45Degree +Terminal Block WAGO 236-105, 45Degree (cable under 45degree), 5 pins, pitch 5mm, size 27.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-105 45Degree pitch 5mm size 27.3x14mm^2 drill 1.15mm pad 3mm +0 +5 +5 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-106_1x06_P5.00mm_45Degree +Terminal Block WAGO 236-106, 45Degree (cable under 45degree), 6 pins, pitch 5mm, size 32.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-106 45Degree pitch 5mm size 32.3x14mm^2 drill 1.15mm pad 3mm +0 +6 +6 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-107_1x07_P5.00mm_45Degree +Terminal Block WAGO 236-107, 45Degree (cable under 45degree), 7 pins, pitch 5mm, size 37.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-107 45Degree pitch 5mm size 37.3x14mm^2 drill 1.15mm pad 3mm +0 +7 +7 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-108_1x08_P5.00mm_45Degree +Terminal Block WAGO 236-108, 45Degree (cable under 45degree), 8 pins, pitch 5mm, size 42.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-108 45Degree pitch 5mm size 42.3x14mm^2 drill 1.15mm pad 3mm +0 +8 +8 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-109_1x09_P5.00mm_45Degree +Terminal Block WAGO 236-109, 45Degree (cable under 45degree), 9 pins, pitch 5mm, size 47.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-109 45Degree pitch 5mm size 47.3x14mm^2 drill 1.15mm pad 3mm +0 +9 +9 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-112_1x12_P5.00mm_45Degree +Terminal Block WAGO 236-112, 45Degree (cable under 45degree), 12 pins, pitch 5mm, size 62.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-112 45Degree pitch 5mm size 62.3x14mm^2 drill 1.15mm pad 3mm +0 +12 +12 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-114_1x14_P5.00mm_45Degree +Terminal Block WAGO 236-114, 45Degree (cable under 45degree), 14 pins, pitch 5mm, size 72.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-114 45Degree pitch 5mm size 72.3x14mm^2 drill 1.15mm pad 3mm +0 +14 +14 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-116_1x16_P5.00mm_45Degree +Terminal Block WAGO 236-116, 45Degree (cable under 45degree), 16 pins, pitch 5mm, size 82.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-116 45Degree pitch 5mm size 82.3x14mm^2 drill 1.15mm pad 3mm +0 +16 +16 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-124_1x24_P5.00mm_45Degree +Terminal Block WAGO 236-124, 45Degree (cable under 45degree), 24 pins, pitch 5mm, size 122x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-124 45Degree pitch 5mm size 122x14mm^2 drill 1.15mm pad 3mm +0 +24 +24 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-136_1x36_P5.00mm_45Degree +Terminal Block WAGO 236-136, 45Degree (cable under 45degree), 36 pins, pitch 5mm, size 182x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-136 45Degree pitch 5mm size 182x14mm^2 drill 1.15mm pad 3mm +0 +36 +36 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-148_1x48_P5.00mm_45Degree +Terminal Block WAGO 236-148, 45Degree (cable under 45degree), 48 pins, pitch 5mm, size 242x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-148 45Degree pitch 5mm size 242x14mm^2 drill 1.15mm pad 3mm +0 +48 +48 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-201_1x01_P7.50mm_45Degree +Terminal Block WAGO 236-201, 45Degree (cable under 45degree), 1 pins, pitch 7.5mm, size 9.8x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-201 45Degree pitch 7.5mm size 9.8x14mm^2 drill 1.15mm pad 3mm +0 +1 +1 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-202_1x02_P7.50mm_45Degree +Terminal Block WAGO 236-202, 45Degree (cable under 45degree), 2 pins, pitch 7.5mm, size 17.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-202 45Degree pitch 7.5mm size 17.3x14mm^2 drill 1.15mm pad 3mm +0 +2 +2 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-203_1x03_P7.50mm_45Degree +Terminal Block WAGO 236-203, 45Degree (cable under 45degree), 3 pins, pitch 7.5mm, size 24.8x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-203 45Degree pitch 7.5mm size 24.8x14mm^2 drill 1.15mm pad 3mm +0 +3 +3 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-204_1x04_P7.50mm_45Degree +Terminal Block WAGO 236-204, 45Degree (cable under 45degree), 4 pins, pitch 7.5mm, size 32.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-204 45Degree pitch 7.5mm size 32.3x14mm^2 drill 1.15mm pad 3mm +0 +4 +4 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-205_1x05_P7.50mm_45Degree +Terminal Block WAGO 236-205, 45Degree (cable under 45degree), 5 pins, pitch 7.5mm, size 39.8x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-205 45Degree pitch 7.5mm size 39.8x14mm^2 drill 1.15mm pad 3mm +0 +5 +5 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-206_1x06_P7.50mm_45Degree +Terminal Block WAGO 236-206, 45Degree (cable under 45degree), 6 pins, pitch 7.5mm, size 47.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-206 45Degree pitch 7.5mm size 47.3x14mm^2 drill 1.15mm pad 3mm +0 +6 +6 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-207_1x07_P7.50mm_45Degree +Terminal Block WAGO 236-207, 45Degree (cable under 45degree), 7 pins, pitch 7.5mm, size 54.8x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-207 45Degree pitch 7.5mm size 54.8x14mm^2 drill 1.15mm pad 3mm +0 +7 +7 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-208_1x08_P7.50mm_45Degree +Terminal Block WAGO 236-208, 45Degree (cable under 45degree), 8 pins, pitch 7.5mm, size 62.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-208 45Degree pitch 7.5mm size 62.3x14mm^2 drill 1.15mm pad 3mm +0 +8 +8 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-209_1x09_P7.50mm_45Degree +Terminal Block WAGO 236-209, 45Degree (cable under 45degree), 9 pins, pitch 7.5mm, size 69.8x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-209 45Degree pitch 7.5mm size 69.8x14mm^2 drill 1.15mm pad 3mm +0 +9 +9 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-212_1x12_P7.50mm_45Degree +Terminal Block WAGO 236-212, 45Degree (cable under 45degree), 12 pins, pitch 7.5mm, size 92.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-212 45Degree pitch 7.5mm size 92.3x14mm^2 drill 1.15mm pad 3mm +0 +12 +12 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-216_1x16_P7.50mm_45Degree +Terminal Block WAGO 236-216, 45Degree (cable under 45degree), 16 pins, pitch 7.5mm, size 122x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-216 45Degree pitch 7.5mm size 122x14mm^2 drill 1.15mm pad 3mm +0 +16 +16 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-224_1x24_P7.50mm_45Degree +Terminal Block WAGO 236-224, 45Degree (cable under 45degree), 24 pins, pitch 7.5mm, size 182x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-224 45Degree pitch 7.5mm size 182x14mm^2 drill 1.15mm pad 3mm +0 +24 +24 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-301_1x01_P10.00mm_45Degree +Terminal Block WAGO 236-301, 45Degree (cable under 45degree), 1 pins, pitch 10mm, size 12.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-301 45Degree pitch 10mm size 12.3x14mm^2 drill 1.15mm pad 3mm +0 +1 +1 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-302_1x02_P10.00mm_45Degree +Terminal Block WAGO 236-302, 45Degree (cable under 45degree), 2 pins, pitch 10mm, size 22.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-302 45Degree pitch 10mm size 22.3x14mm^2 drill 1.15mm pad 3mm +0 +2 +2 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-303_1x03_P10.00mm_45Degree +Terminal Block WAGO 236-303, 45Degree (cable under 45degree), 3 pins, pitch 10mm, size 32.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-303 45Degree pitch 10mm size 32.3x14mm^2 drill 1.15mm pad 3mm +0 +3 +3 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-304_1x04_P10.00mm_45Degree +Terminal Block WAGO 236-304, 45Degree (cable under 45degree), 4 pins, pitch 10mm, size 42.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-304 45Degree pitch 10mm size 42.3x14mm^2 drill 1.15mm pad 3mm +0 +4 +4 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-305_1x05_P10.00mm_45Degree +Terminal Block WAGO 236-305, 45Degree (cable under 45degree), 5 pins, pitch 10mm, size 52.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-305 45Degree pitch 10mm size 52.3x14mm^2 drill 1.15mm pad 3mm +0 +5 +5 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-306_1x06_P10.00mm_45Degree +Terminal Block WAGO 236-306, 45Degree (cable under 45degree), 6 pins, pitch 10mm, size 62.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-306 45Degree pitch 10mm size 62.3x14mm^2 drill 1.15mm pad 3mm +0 +6 +6 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-308_1x08_P10.00mm_45Degree +Terminal Block WAGO 236-308, 45Degree (cable under 45degree), 8 pins, pitch 10mm, size 82.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-308 45Degree pitch 10mm size 82.3x14mm^2 drill 1.15mm pad 3mm +0 +8 +8 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-309_1x09_P10.00mm_45Degree +Terminal Block WAGO 236-309, 45Degree (cable under 45degree), 9 pins, pitch 10mm, size 92.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-309 45Degree pitch 10mm size 92.3x14mm^2 drill 1.15mm pad 3mm +0 +9 +9 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-312_1x12_P10.00mm_45Degree +Terminal Block WAGO 236-312, 45Degree (cable under 45degree), 12 pins, pitch 10mm, size 122x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-312 45Degree pitch 10mm size 122x14mm^2 drill 1.15mm pad 3mm +0 +12 +12 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-316_1x16_P10.00mm_45Degree +Terminal Block WAGO 236-316, 45Degree (cable under 45degree), 16 pins, pitch 10mm, size 162x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-316 45Degree pitch 10mm size 162x14mm^2 drill 1.15mm pad 3mm +0 +16 +16 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-324_1x24_P10.00mm_45Degree +Terminal Block WAGO 236-324, 45Degree (cable under 45degree), 24 pins, pitch 10mm, size 242x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-324 45Degree pitch 10mm size 242x14mm^2 drill 1.15mm pad 3mm +0 +24 +24 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-401_1x01_P5.00mm_45Degree +Terminal Block WAGO 236-401, 45Degree (cable under 45degree), 1 pins, pitch 5mm, size 7.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-401 45Degree pitch 5mm size 7.3x14mm^2 drill 1.15mm pad 3mm +0 +2 +1 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-402_1x02_P5.00mm_45Degree +Terminal Block WAGO 236-402, 45Degree (cable under 45degree), 2 pins, pitch 5mm, size 12.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-402 45Degree pitch 5mm size 12.3x14mm^2 drill 1.15mm pad 3mm +0 +4 +2 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-403_1x03_P5.00mm_45Degree +Terminal Block WAGO 236-403, 45Degree (cable under 45degree), 3 pins, pitch 5mm, size 17.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-403 45Degree pitch 5mm size 17.3x14mm^2 drill 1.15mm pad 3mm +0 +6 +3 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-404_1x04_P5.00mm_45Degree +Terminal Block WAGO 236-404, 45Degree (cable under 45degree), 4 pins, pitch 5mm, size 22.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-404 45Degree pitch 5mm size 22.3x14mm^2 drill 1.15mm pad 3mm +0 +8 +4 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-405_1x05_P5.00mm_45Degree +Terminal Block WAGO 236-405, 45Degree (cable under 45degree), 5 pins, pitch 5mm, size 27.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-405 45Degree pitch 5mm size 27.3x14mm^2 drill 1.15mm pad 3mm +0 +10 +5 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-406_1x06_P5.00mm_45Degree +Terminal Block WAGO 236-406, 45Degree (cable under 45degree), 6 pins, pitch 5mm, size 32.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-406 45Degree pitch 5mm size 32.3x14mm^2 drill 1.15mm pad 3mm +0 +12 +6 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-407_1x07_P5.00mm_45Degree +Terminal Block WAGO 236-407, 45Degree (cable under 45degree), 7 pins, pitch 5mm, size 37.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-407 45Degree pitch 5mm size 37.3x14mm^2 drill 1.15mm pad 3mm +0 +14 +7 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-408_1x08_P5.00mm_45Degree +Terminal Block WAGO 236-408, 45Degree (cable under 45degree), 8 pins, pitch 5mm, size 42.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-408 45Degree pitch 5mm size 42.3x14mm^2 drill 1.15mm pad 3mm +0 +16 +8 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-409_1x09_P5.00mm_45Degree +Terminal Block WAGO 236-409, 45Degree (cable under 45degree), 9 pins, pitch 5mm, size 47.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-409 45Degree pitch 5mm size 47.3x14mm^2 drill 1.15mm pad 3mm +0 +18 +9 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-412_1x12_P5.00mm_45Degree +Terminal Block WAGO 236-412, 45Degree (cable under 45degree), 12 pins, pitch 5mm, size 62.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-412 45Degree pitch 5mm size 62.3x14mm^2 drill 1.15mm pad 3mm +0 +24 +12 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-414_1x14_P5.00mm_45Degree +Terminal Block WAGO 236-414, 45Degree (cable under 45degree), 14 pins, pitch 5mm, size 72.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-414 45Degree pitch 5mm size 72.3x14mm^2 drill 1.15mm pad 3mm +0 +28 +14 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-416_1x16_P5.00mm_45Degree +Terminal Block WAGO 236-416, 45Degree (cable under 45degree), 16 pins, pitch 5mm, size 82.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-416 45Degree pitch 5mm size 82.3x14mm^2 drill 1.15mm pad 3mm +0 +32 +16 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-424_1x24_P5.00mm_45Degree +Terminal Block WAGO 236-424, 45Degree (cable under 45degree), 24 pins, pitch 5mm, size 122x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-424 45Degree pitch 5mm size 122x14mm^2 drill 1.15mm pad 3mm +0 +48 +24 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-436_1x36_P5.00mm_45Degree +Terminal Block WAGO 236-436, 45Degree (cable under 45degree), 36 pins, pitch 5mm, size 182x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-436 45Degree pitch 5mm size 182x14mm^2 drill 1.15mm pad 3mm +0 +72 +36 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-448_1x48_P5.00mm_45Degree +Terminal Block WAGO 236-448, 45Degree (cable under 45degree), 48 pins, pitch 5mm, size 242x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-448 45Degree pitch 5mm size 242x14mm^2 drill 1.15mm pad 3mm +0 +96 +48 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-501_1x01_P7.50mm_45Degree +Terminal Block WAGO 236-501, 45Degree (cable under 45degree), 1 pins, pitch 7.5mm, size 9.8x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-501 45Degree pitch 7.5mm size 9.8x14mm^2 drill 1.15mm pad 3mm +0 +2 +1 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-502_1x02_P7.50mm_45Degree +Terminal Block WAGO 236-502, 45Degree (cable under 45degree), 2 pins, pitch 7.5mm, size 17.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-502 45Degree pitch 7.5mm size 17.3x14mm^2 drill 1.15mm pad 3mm +0 +4 +2 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-503_1x03_P7.50mm_45Degree +Terminal Block WAGO 236-503, 45Degree (cable under 45degree), 3 pins, pitch 7.5mm, size 24.8x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-503 45Degree pitch 7.5mm size 24.8x14mm^2 drill 1.15mm pad 3mm +0 +6 +3 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-504_1x04_P7.50mm_45Degree +Terminal Block WAGO 236-504, 45Degree (cable under 45degree), 4 pins, pitch 7.5mm, size 32.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-504 45Degree pitch 7.5mm size 32.3x14mm^2 drill 1.15mm pad 3mm +0 +8 +4 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-505_1x05_P7.50mm_45Degree +Terminal Block WAGO 236-505, 45Degree (cable under 45degree), 5 pins, pitch 7.5mm, size 39.8x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-505 45Degree pitch 7.5mm size 39.8x14mm^2 drill 1.15mm pad 3mm +0 +10 +5 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-506_1x06_P7.50mm_45Degree +Terminal Block WAGO 236-506, 45Degree (cable under 45degree), 6 pins, pitch 7.5mm, size 47.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-506 45Degree pitch 7.5mm size 47.3x14mm^2 drill 1.15mm pad 3mm +0 +12 +6 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-507_1x07_P7.50mm_45Degree +Terminal Block WAGO 236-507, 45Degree (cable under 45degree), 7 pins, pitch 7.5mm, size 54.8x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-507 45Degree pitch 7.5mm size 54.8x14mm^2 drill 1.15mm pad 3mm +0 +14 +7 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-508_1x08_P7.50mm_45Degree +Terminal Block WAGO 236-508, 45Degree (cable under 45degree), 8 pins, pitch 7.5mm, size 62.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-508 45Degree pitch 7.5mm size 62.3x14mm^2 drill 1.15mm pad 3mm +0 +16 +8 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-509_1x09_P7.50mm_45Degree +Terminal Block WAGO 236-509, 45Degree (cable under 45degree), 9 pins, pitch 7.5mm, size 69.8x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-509 45Degree pitch 7.5mm size 69.8x14mm^2 drill 1.15mm pad 3mm +0 +18 +9 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-512_1x12_P7.50mm_45Degree +Terminal Block WAGO 236-512, 45Degree (cable under 45degree), 12 pins, pitch 7.5mm, size 92.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-512 45Degree pitch 7.5mm size 92.3x14mm^2 drill 1.15mm pad 3mm +0 +24 +12 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-516_1x16_P7.50mm_45Degree +Terminal Block WAGO 236-516, 45Degree (cable under 45degree), 16 pins, pitch 7.5mm, size 122x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-516 45Degree pitch 7.5mm size 122x14mm^2 drill 1.15mm pad 3mm +0 +32 +16 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-524_1x24_P7.50mm_45Degree +Terminal Block WAGO 236-524, 45Degree (cable under 45degree), 24 pins, pitch 7.5mm, size 182x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-524 45Degree pitch 7.5mm size 182x14mm^2 drill 1.15mm pad 3mm +0 +48 +24 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-601_1x01_P10.00mm_45Degree +Terminal Block WAGO 236-601, 45Degree (cable under 45degree), 1 pins, pitch 10mm, size 12.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-601 45Degree pitch 10mm size 12.3x14mm^2 drill 1.15mm pad 3mm +0 +2 +1 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-602_1x02_P10.00mm_45Degree +Terminal Block WAGO 236-602, 45Degree (cable under 45degree), 2 pins, pitch 10mm, size 22.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-602 45Degree pitch 10mm size 22.3x14mm^2 drill 1.15mm pad 3mm +0 +4 +2 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-603_1x03_P10.00mm_45Degree +Terminal Block WAGO 236-603, 45Degree (cable under 45degree), 3 pins, pitch 10mm, size 32.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-603 45Degree pitch 10mm size 32.3x14mm^2 drill 1.15mm pad 3mm +0 +6 +3 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-604_1x04_P10.00mm_45Degree +Terminal Block WAGO 236-604, 45Degree (cable under 45degree), 4 pins, pitch 10mm, size 42.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-604 45Degree pitch 10mm size 42.3x14mm^2 drill 1.15mm pad 3mm +0 +8 +4 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-605_1x05_P10.00mm_45Degree +Terminal Block WAGO 236-605, 45Degree (cable under 45degree), 5 pins, pitch 10mm, size 52.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-605 45Degree pitch 10mm size 52.3x14mm^2 drill 1.15mm pad 3mm +0 +10 +5 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-606_1x06_P10.00mm_45Degree +Terminal Block WAGO 236-606, 45Degree (cable under 45degree), 6 pins, pitch 10mm, size 62.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-606 45Degree pitch 10mm size 62.3x14mm^2 drill 1.15mm pad 3mm +0 +12 +6 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-608_1x08_P10.00mm_45Degree +Terminal Block WAGO 236-608, 45Degree (cable under 45degree), 8 pins, pitch 10mm, size 82.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-608 45Degree pitch 10mm size 82.3x14mm^2 drill 1.15mm pad 3mm +0 +16 +8 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-609_1x09_P10.00mm_45Degree +Terminal Block WAGO 236-609, 45Degree (cable under 45degree), 9 pins, pitch 10mm, size 92.3x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-609 45Degree pitch 10mm size 92.3x14mm^2 drill 1.15mm pad 3mm +0 +18 +9 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-612_1x12_P10.00mm_45Degree +Terminal Block WAGO 236-612, 45Degree (cable under 45degree), 12 pins, pitch 10mm, size 122x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-612 45Degree pitch 10mm size 122x14mm^2 drill 1.15mm pad 3mm +0 +24 +12 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-616_1x16_P10.00mm_45Degree +Terminal Block WAGO 236-616, 45Degree (cable under 45degree), 16 pins, pitch 10mm, size 162x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-616 45Degree pitch 10mm size 162x14mm^2 drill 1.15mm pad 3mm +0 +32 +16 +TerminalBlock_WAGO +TerminalBlock_WAGO_236-624_1x24_P10.00mm_45Degree +Terminal Block WAGO 236-624, 45Degree (cable under 45degree), 24 pins, pitch 10mm, size 242x14mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 236-624 45Degree pitch 10mm size 242x14mm^2 drill 1.15mm pad 3mm +0 +48 +24 +TerminalBlock_WAGO +TerminalBlock_WAGO_804-101_1x01_P5.00mm_45Degree +Terminal Block WAGO 804-101, 45Degree (cable under 45degree), 1 pins, pitch 5mm, size 6.5x15mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 804-101 45Degree pitch 5mm size 6.5x15mm^2 drill 1.2mm pad 3mm +0 +2 +1 +TerminalBlock_WAGO +TerminalBlock_WAGO_804-102_1x02_P5.00mm_45Degree +Terminal Block WAGO 804-102, 45Degree (cable under 45degree), 2 pins, pitch 5mm, size 11.5x15mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 804-102 45Degree pitch 5mm size 11.5x15mm^2 drill 1.2mm pad 3mm +0 +4 +2 +TerminalBlock_WAGO +TerminalBlock_WAGO_804-103_1x03_P5.00mm_45Degree +Terminal Block WAGO 804-103, 45Degree (cable under 45degree), 3 pins, pitch 5mm, size 16.5x15mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 804-103 45Degree pitch 5mm size 16.5x15mm^2 drill 1.2mm pad 3mm +0 +6 +3 +TerminalBlock_WAGO +TerminalBlock_WAGO_804-104_1x04_P5.00mm_45Degree +Terminal Block WAGO 804-104, 45Degree (cable under 45degree), 4 pins, pitch 5mm, size 21.5x15mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 804-104 45Degree pitch 5mm size 21.5x15mm^2 drill 1.2mm pad 3mm +0 +8 +4 +TerminalBlock_WAGO +TerminalBlock_WAGO_804-105_1x05_P5.00mm_45Degree +Terminal Block WAGO 804-105, 45Degree (cable under 45degree), 5 pins, pitch 5mm, size 26.5x15mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 804-105 45Degree pitch 5mm size 26.5x15mm^2 drill 1.2mm pad 3mm +0 +10 +5 +TerminalBlock_WAGO +TerminalBlock_WAGO_804-106_1x06_P5.00mm_45Degree +Terminal Block WAGO 804-106, 45Degree (cable under 45degree), 6 pins, pitch 5mm, size 31.5x15mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 804-106 45Degree pitch 5mm size 31.5x15mm^2 drill 1.2mm pad 3mm +0 +12 +6 +TerminalBlock_WAGO +TerminalBlock_WAGO_804-107_1x07_P5.00mm_45Degree +Terminal Block WAGO 804-107, 45Degree (cable under 45degree), 7 pins, pitch 5mm, size 36.5x15mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 804-107 45Degree pitch 5mm size 36.5x15mm^2 drill 1.2mm pad 3mm +0 +14 +7 +TerminalBlock_WAGO +TerminalBlock_WAGO_804-108_1x08_P5.00mm_45Degree +Terminal Block WAGO 804-108, 45Degree (cable under 45degree), 8 pins, pitch 5mm, size 41.5x15mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 804-108 45Degree pitch 5mm size 41.5x15mm^2 drill 1.2mm pad 3mm +0 +16 +8 +TerminalBlock_WAGO +TerminalBlock_WAGO_804-109_1x09_P5.00mm_45Degree +Terminal Block WAGO 804-109, 45Degree (cable under 45degree), 9 pins, pitch 5mm, size 46.5x15mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 804-109 45Degree pitch 5mm size 46.5x15mm^2 drill 1.2mm pad 3mm +0 +18 +9 +TerminalBlock_WAGO +TerminalBlock_WAGO_804-110_1x10_P5.00mm_45Degree +Terminal Block WAGO 804-110, 45Degree (cable under 45degree), 10 pins, pitch 5mm, size 51.5x15mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 804-110 45Degree pitch 5mm size 51.5x15mm^2 drill 1.2mm pad 3mm +0 +20 +10 +TerminalBlock_WAGO +TerminalBlock_WAGO_804-111_1x11_P5.00mm_45Degree +Terminal Block WAGO 804-111, 45Degree (cable under 45degree), 11 pins, pitch 5mm, size 56.5x15mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 804-111 45Degree pitch 5mm size 56.5x15mm^2 drill 1.2mm pad 3mm +0 +22 +11 +TerminalBlock_WAGO +TerminalBlock_WAGO_804-112_1x12_P5.00mm_45Degree +Terminal Block WAGO 804-112, 45Degree (cable under 45degree), 12 pins, pitch 5mm, size 61.5x15mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 804-112 45Degree pitch 5mm size 61.5x15mm^2 drill 1.2mm pad 3mm +0 +24 +12 +TerminalBlock_WAGO +TerminalBlock_WAGO_804-113_1x13_P5.00mm_45Degree +Terminal Block WAGO 804-113, 45Degree (cable under 45degree), 13 pins, pitch 5mm, size 66.5x15mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 804-113 45Degree pitch 5mm size 66.5x15mm^2 drill 1.2mm pad 3mm +0 +26 +13 +TerminalBlock_WAGO +TerminalBlock_WAGO_804-114_1x14_P5.00mm_45Degree +Terminal Block WAGO 804-114, 45Degree (cable under 45degree), 14 pins, pitch 5mm, size 71.5x15mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 804-114 45Degree pitch 5mm size 71.5x15mm^2 drill 1.2mm pad 3mm +0 +28 +14 +TerminalBlock_WAGO +TerminalBlock_WAGO_804-115_1x15_P5.00mm_45Degree +Terminal Block WAGO 804-115, 45Degree (cable under 45degree), 15 pins, pitch 5mm, size 76.5x15mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 804-115 45Degree pitch 5mm size 76.5x15mm^2 drill 1.2mm pad 3mm +0 +30 +15 +TerminalBlock_WAGO +TerminalBlock_WAGO_804-116_1x16_P5.00mm_45Degree +Terminal Block WAGO 804-116, 45Degree (cable under 45degree), 16 pins, pitch 5mm, size 81.5x15mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 804-116 45Degree pitch 5mm size 81.5x15mm^2 drill 1.2mm pad 3mm +0 +32 +16 +TerminalBlock_WAGO +TerminalBlock_WAGO_804-124_1x24_P5.00mm_45Degree +Terminal Block WAGO 804-124, 45Degree (cable under 45degree), 24 pins, pitch 5mm, size 122x15mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 804-124 45Degree pitch 5mm size 122x15mm^2 drill 1.2mm pad 3mm +0 +48 +24 +TerminalBlock_WAGO +TerminalBlock_WAGO_804-301_1x01_P7.50mm_45Degree +Terminal Block WAGO 804-301, 45Degree (cable under 45degree), 1 pins, pitch 7.5mm, size 6.5x15mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 804-301 45Degree pitch 7.5mm size 6.5x15mm^2 drill 1.2mm pad 3mm +0 +2 +1 +TerminalBlock_WAGO +TerminalBlock_WAGO_804-302_1x02_P7.50mm_45Degree +Terminal Block WAGO 804-302, 45Degree (cable under 45degree), 2 pins, pitch 7.5mm, size 14x15mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 804-302 45Degree pitch 7.5mm size 14x15mm^2 drill 1.2mm pad 3mm +0 +4 +2 +TerminalBlock_WAGO +TerminalBlock_WAGO_804-303_1x03_P7.50mm_45Degree +Terminal Block WAGO 804-303, 45Degree (cable under 45degree), 3 pins, pitch 7.5mm, size 21.5x15mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 804-303 45Degree pitch 7.5mm size 21.5x15mm^2 drill 1.2mm pad 3mm +0 +6 +3 +TerminalBlock_WAGO +TerminalBlock_WAGO_804-304_1x04_P7.50mm_45Degree +Terminal Block WAGO 804-304, 45Degree (cable under 45degree), 4 pins, pitch 7.5mm, size 29x15mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 804-304 45Degree pitch 7.5mm size 29x15mm^2 drill 1.2mm pad 3mm +0 +8 +4 +TerminalBlock_WAGO +TerminalBlock_WAGO_804-305_1x05_P7.50mm_45Degree +Terminal Block WAGO 804-305, 45Degree (cable under 45degree), 5 pins, pitch 7.5mm, size 36.5x15mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 804-305 45Degree pitch 7.5mm size 36.5x15mm^2 drill 1.2mm pad 3mm +0 +10 +5 +TerminalBlock_WAGO +TerminalBlock_WAGO_804-306_1x06_P7.50mm_45Degree +Terminal Block WAGO 804-306, 45Degree (cable under 45degree), 6 pins, pitch 7.5mm, size 44x15mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 804-306 45Degree pitch 7.5mm size 44x15mm^2 drill 1.2mm pad 3mm +0 +12 +6 +TerminalBlock_WAGO +TerminalBlock_WAGO_804-307_1x07_P7.50mm_45Degree +Terminal Block WAGO 804-307, 45Degree (cable under 45degree), 7 pins, pitch 7.5mm, size 51.5x15mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 804-307 45Degree pitch 7.5mm size 51.5x15mm^2 drill 1.2mm pad 3mm +0 +14 +7 +TerminalBlock_WAGO +TerminalBlock_WAGO_804-308_1x08_P7.50mm_45Degree +Terminal Block WAGO 804-308, 45Degree (cable under 45degree), 8 pins, pitch 7.5mm, size 59x15mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 804-308 45Degree pitch 7.5mm size 59x15mm^2 drill 1.2mm pad 3mm +0 +16 +8 +TerminalBlock_WAGO +TerminalBlock_WAGO_804-309_1x09_P7.50mm_45Degree +Terminal Block WAGO 804-309, 45Degree (cable under 45degree), 9 pins, pitch 7.5mm, size 66.5x15mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 804-309 45Degree pitch 7.5mm size 66.5x15mm^2 drill 1.2mm pad 3mm +0 +18 +9 +TerminalBlock_WAGO +TerminalBlock_WAGO_804-310_1x10_P7.50mm_45Degree +Terminal Block WAGO 804-310, 45Degree (cable under 45degree), 10 pins, pitch 7.5mm, size 74x15mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 804-310 45Degree pitch 7.5mm size 74x15mm^2 drill 1.2mm pad 3mm +0 +20 +10 +TerminalBlock_WAGO +TerminalBlock_WAGO_804-311_1x11_P7.50mm_45Degree +Terminal Block WAGO 804-311, 45Degree (cable under 45degree), 11 pins, pitch 7.5mm, size 81.5x15mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 804-311 45Degree pitch 7.5mm size 81.5x15mm^2 drill 1.2mm pad 3mm +0 +22 +11 +TerminalBlock_WAGO +TerminalBlock_WAGO_804-312_1x12_P7.50mm_45Degree +Terminal Block WAGO 804-312, 45Degree (cable under 45degree), 12 pins, pitch 7.5mm, size 89x15mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 804-312 45Degree pitch 7.5mm size 89x15mm^2 drill 1.2mm pad 3mm +0 +24 +12 +TerminalBlock_WAGO +TerminalBlock_WAGO_804-316_1x16_P7.50mm_45Degree +Terminal Block WAGO 804-316, 45Degree (cable under 45degree), 16 pins, pitch 7.5mm, size 119x15mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 804-316 45Degree pitch 7.5mm size 119x15mm^2 drill 1.2mm pad 3mm +0 +32 +16 +TerminalBlock_WAGO +TerminalBlock_WAGO_804-324_1x24_P7.50mm_45Degree +Terminal Block WAGO 804-324, 45Degree (cable under 45degree), 24 pins, pitch 7.5mm, size 179x15mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO +THT Terminal Block WAGO 804-324 45Degree pitch 7.5mm size 179x15mm^2 drill 1.2mm pad 3mm +0 +48 +24 +TerminalBlock_Wuerth +Wuerth_REDCUBE-THR_WP-THRBU_74650073_THR +REDCUBE THR with internal through-hole thread WP-THRBU (https://www.we-online.de/katalog/datasheet/74650073.pdf) +screw terminal thread redcube thr power connector +0 +8 +1 +TerminalBlock_Wuerth +Wuerth_REDCUBE-THR_WP-THRBU_74650074_THR +REDCUBE THR with internal through-hole thread WP-THRBU (https://www.we-online.de/katalog/datasheet/74650074.pdf) +screw terminal thread redcube thr power connector +0 +8 +1 +TerminalBlock_Wuerth +Wuerth_REDCUBE-THR_WP-THRBU_74650094_THR +REDCUBE THR with internal through-hole thread WP-THRBU (https://www.we-online.de/katalog/datasheet/74650094.pdf) +screw terminal thread redcube thr power connector +0 +16 +1 +TerminalBlock_Wuerth +Wuerth_REDCUBE-THR_WP-THRBU_74650173_THR +REDCUBE THR with internal through-hole thread WP-THRBU (https://www.we-online.de/katalog/datasheet/74650173.pdf) +screw terminal thread redcube thr power connector +0 +8 +1 +TerminalBlock_Wuerth +Wuerth_REDCUBE-THR_WP-THRBU_74650174_THR +REDCUBE THR with internal through-hole thread WP-THRBU (https://www.we-online.de/katalog/datasheet/74650174.pdf) +screw terminal thread redcube thr power connector +0 +8 +1 +TerminalBlock_Wuerth +Wuerth_REDCUBE-THR_WP-THRBU_74650194_THR +REDCUBE THR with internal through-hole thread WP-THRBU (https://www.we-online.de/katalog/datasheet/74650194.pdf) +screw terminal thread redcube thr power connector +0 +18 +1 +TerminalBlock_Wuerth +Wuerth_REDCUBE-THR_WP-THRBU_74650195_THR +REDCUBE THR with internal through-hole thread WP-THRBU (https://www.we-online.de/katalog/datasheet/74650195.pdf) +screw terminal thread redcube thr power connector +0 +18 +1 +TerminalBlock_Wuerth +Wuerth_REDCUBE-THR_WP-THRBU_74655095_THR +REDCUBE THR with internal through-hole thread WP-THRBU (https://www.we-online.de/katalog/datasheet/74655095.pdf) +screw terminal thread redcube thr power connector +0 +16 +1 +TerminalBlock_Wuerth +Wuerth_REDCUBE-THR_WP-THRSH_74651173_THR +REDCUBE THR with internal through-hole thread WP-THRSH (https://www.we-online.de/katalog/datasheet/74651173.pdf) +screw terminal thread redcube thr power connector +0 +8 +1 +TerminalBlock_Wuerth +Wuerth_REDCUBE-THR_WP-THRSH_74651174_THR +REDCUBE THR with internal through-hole thread WP-THRSH (https://www.we-online.de/katalog/datasheet/74651174.pdf) +screw terminal thread redcube thr power connector +0 +8 +1 +TerminalBlock_Wuerth +Wuerth_REDCUBE-THR_WP-THRSH_74651175_THR +REDCUBE THR with internal through-hole thread WP-THRSH (https://www.we-online.de/katalog/datasheet/74651175.pdf) +screw terminal thread redcube thr power connector +0 +8 +1 +TerminalBlock_Wuerth +Wuerth_REDCUBE-THR_WP-THRSH_74651194_THR +REDCUBE THR with internal through-hole thread WP-THRSH (https://www.we-online.de/katalog/datasheet/74651194.pdf) +screw terminal thread redcube thr power connector +0 +18 +1 +TerminalBlock_Wuerth +Wuerth_REDCUBE-THR_WP-THRSH_74651195_THR +REDCUBE THR with internal through-hole thread WP-THRSH (https://www.we-online.de/katalog/datasheet/74651195.pdf) +screw terminal thread redcube thr power connector +0 +18 +1 +TestPoint +TestPoint_2Pads_Pitch2.54mm_Drill0.8mm +Test point with 2 pins, pitch 2.54mm, drill diameter 0.8mm +CONN DEV +0 +2 +2 +TestPoint +TestPoint_2Pads_Pitch5.08mm_Drill1.3mm +Test point with 2 pads, pitch 5.08mm, hole diameter 1.3mm, wire diameter 1.0mm +CONN DEV +0 +2 +2 +TestPoint +TestPoint_Bridge_Pitch2.0mm_Drill0.7mm +wire loop as test point, pitch 2.0mm, hole diameter 0.7mm, wire diameter 0.5mm +test point wire loop +0 +2 +1 +TestPoint +TestPoint_Bridge_Pitch2.54mm_Drill0.7mm +wire loop as test point, pitch 2.0mm, hole diameter 0.7mm, wire diameter 0.5mm +test point wire loop +0 +2 +1 +TestPoint +TestPoint_Bridge_Pitch2.54mm_Drill1.0mm +wire loop as test point, pitch 2.54mm, hole diameter 1.0mm, wire diameter 0.8mm +test point wire loop +0 +2 +1 +TestPoint +TestPoint_Bridge_Pitch2.54mm_Drill1.3mm +wire loop as test point, pitch 2.54mm, hole diameter 1.3mm, wire diameter 1.0mm +test point wire loop +0 +2 +1 +TestPoint +TestPoint_Bridge_Pitch3.81mm_Drill1.3mm +wire loop as test point, pitch 3.81mm, hole diameter 1.3mm, wire diameter 1.0mm +test point wire loop +0 +2 +1 +TestPoint +TestPoint_Bridge_Pitch5.08mm_Drill0.7mm +wire loop as test point, pitch 5.08mm, hole diameter 0.7mm, wire diameter 1.0mm +test point wire loop +0 +2 +1 +TestPoint +TestPoint_Bridge_Pitch5.08mm_Drill1.3mm +wire loop as test point, pitch 5.08mm, hole diameter 1.3mm, wire diameter 1.0mm +test point wire loop +0 +2 +1 +TestPoint +TestPoint_Bridge_Pitch6.35mm_Drill1.3mm +wire loop as test point, pitch 6.35mm, hole diameter 1.3mm, wire diameter 1.0mm +test point wire loop +0 +2 +1 +TestPoint +TestPoint_Bridge_Pitch7.62mm_Drill1.3mm +wire loop as test point, pitch 7.62mm, hole diameter 1.3mm, wire diameter 1.0mm +test point wire loop +0 +2 +1 +TestPoint +TestPoint_Keystone_5000-5004_Miniature +Keystone Miniature THM Test Point 5000-5004, http://www.keyelco.com/product-pdf.cfm?p=1309 +Through Hole Mount Test Points +0 +1 +1 +TestPoint +TestPoint_Keystone_5005-5009_Compact +Keystone Miniature THM Test Point 5005-5009, http://www.keyelco.com/product-pdf.cfm?p=1314 +Through Hole Mount Test Points +0 +1 +1 +TestPoint +TestPoint_Keystone_5010-5014_Multipurpose +Keystone Miniature THM Test Point 5010-5014, http://www.keyelco.com/product-pdf.cfm?p=1319 +Through Hole Mount Test Points +0 +1 +1 +TestPoint +TestPoint_Keystone_5015_Micro-Minature +SMT Test Point- Micro Miniature 5015, http://www.keyelco.com/product-pdf.cfm?p=1353 +Test Point +0 +1 +1 +TestPoint +TestPoint_Keystone_5019_Minature +SMT Test Point- Micro Miniature 5019, http://www.keyelco.com/product-pdf.cfm?p=1357 +Test Point +0 +1 +1 +TestPoint +TestPoint_Loop_D1.80mm_Drill1.0mm_Beaded +wire loop with bead as test point, loop diameter 1.8mm, hole diameter 1.0mm +test point wire loop bead +0 +1 +1 +TestPoint +TestPoint_Loop_D2.50mm_Drill1.0mm +wire loop as test point, loop diameter 2.5mm, hole diameter 1.0mm +test point wire loop bead +0 +1 +1 +TestPoint +TestPoint_Loop_D2.50mm_Drill1.0mm_LowProfile +low profile wire loop as test point, loop diameter 2.5mm, hole diameter 1.0mm +test point wire loop bead +0 +1 +1 +TestPoint +TestPoint_Loop_D2.50mm_Drill1.85mm +wire loop as test point, loop diameter 2.5mm, hole diameter 1.85mm +test point wire loop bead +0 +1 +1 +TestPoint +TestPoint_Loop_D2.54mm_Drill1.5mm_Beaded +wire loop with bead as test point, loop diameter2.548mm, hole diameter 1.5mm +test point wire loop bead +0 +1 +1 +TestPoint +TestPoint_Loop_D2.60mm_Drill0.9mm_Beaded +wire loop with bead as test point, loop diameter2.6mm, hole diameter 0.9mm +test point wire loop bead +0 +1 +1 +TestPoint +TestPoint_Loop_D2.60mm_Drill1.4mm_Beaded +wire loop with bead as test point, loop diameter2.6mm, hole diameter 1.4mm +test point wire loop bead +0 +1 +1 +TestPoint +TestPoint_Loop_D2.60mm_Drill1.6mm_Beaded +wire loop with bead as test point, loop diameter2.6mm, hole diameter 1.6mm +test point wire loop bead +0 +1 +1 +TestPoint +TestPoint_Loop_D3.50mm_Drill0.9mm_Beaded +wire loop with bead as test point, loop diameter2.6mm, hole diameter 0.9mm +test point wire loop bead +0 +1 +1 +TestPoint +TestPoint_Loop_D3.50mm_Drill1.4mm_Beaded +wire loop with bead as test point, loop diameter 3.5mm, hole diameter 1.4mm +test point wire loop bead +0 +1 +1 +TestPoint +TestPoint_Loop_D3.80mm_Drill2.0mm +wire loop as test point, loop diameter 3.8mm, hole diameter 2.0mm +test point wire loop bead +0 +1 +1 +TestPoint +TestPoint_Loop_D3.80mm_Drill2.5mm +wire loop as test point, loop diameter 3.8mm, hole diameter 2.5mm +test point wire loop bead +0 +1 +1 +TestPoint +TestPoint_Loop_D3.80mm_Drill2.8mm +wire loop as test point, loop diameter 3.8mm, hole diameter 2.8mm +test point wire loop bead +0 +1 +1 +TestPoint +TestPoint_Pad_1.0x1.0mm +SMD rectangular pad as test Point, square 1.0mm side length +test point SMD pad rectangle square +0 +1 +1 +TestPoint +TestPoint_Pad_1.5x1.5mm +SMD rectangular pad as test Point, square 1.5mm side length +test point SMD pad rectangle square +0 +1 +1 +TestPoint +TestPoint_Pad_2.0x2.0mm +SMD rectangular pad as test Point, square 2.0mm side length +test point SMD pad rectangle square +0 +1 +1 +TestPoint +TestPoint_Pad_2.5x2.5mm +SMD rectangular pad as test Point, square 2.5mm side length +test point SMD pad rectangle square +0 +1 +1 +TestPoint +TestPoint_Pad_3.0x3.0mm +SMD rectangular pad as test Point, square 3.0mm side length +test point SMD pad rectangle square +0 +1 +1 +TestPoint +TestPoint_Pad_4.0x4.0mm +SMD rectangular pad as test Point, square 4.0mm side length +test point SMD pad rectangle square +0 +1 +1 +TestPoint +TestPoint_Pad_D1.0mm +SMD pad as test Point, diameter 1.0mm +test point SMD pad +0 +1 +1 +TestPoint +TestPoint_Pad_D1.5mm +SMD pad as test Point, diameter 1.5mm +test point SMD pad +0 +1 +1 +TestPoint +TestPoint_Pad_D2.0mm +SMD pad as test Point, diameter 2.0mm +test point SMD pad +0 +1 +1 +TestPoint +TestPoint_Pad_D2.5mm +SMD pad as test Point, diameter 2.5mm +test point SMD pad +0 +1 +1 +TestPoint +TestPoint_Pad_D3.0mm +SMD pad as test Point, diameter 3.0mm +test point SMD pad +0 +1 +1 +TestPoint +TestPoint_Pad_D4.0mm +SMD pad as test Point, diameter 4.0mm +test point SMD pad +0 +1 +1 +TestPoint +TestPoint_Plated_Hole_D2.0mm +Plated Hole as test Point, diameter 2.0mm +test point plated hole +0 +1 +1 +TestPoint +TestPoint_Plated_Hole_D3.0mm +Plated Hole as test Point, diameter 3.0mm +test point plated hole +0 +1 +1 +TestPoint +TestPoint_Plated_Hole_D4.0mm +Plated Hole as test Point, diameter 4.0mm +test point plated hole +0 +1 +1 +TestPoint +TestPoint_Plated_Hole_D5.0mm +Plated Hole as test Point, diameter 5.0mm +test point plated hole +0 +1 +1 +TestPoint +TestPoint_THTPad_1.0x1.0mm_Drill0.5mm +THT rectangular pad as test Point, square 1.0mm side length, hole diameter 0.5mm +test point THT pad rectangle square +0 +1 +1 +TestPoint +TestPoint_THTPad_1.5x1.5mm_Drill0.7mm +THT rectangular pad as test Point, square 1.5mm side length, hole diameter 0.7mm +test point THT pad rectangle square +0 +1 +1 +TestPoint +TestPoint_THTPad_2.0x2.0mm_Drill1.0mm +THT rectangular pad as test Point, square 2.0mm_Drill1.0mm side length, hole diameter 1.0mm +test point THT pad rectangle square +0 +1 +1 +TestPoint +TestPoint_THTPad_2.5x2.5mm_Drill1.2mm +THT rectangular pad as test Point, square 2.5mm side length, hole diameter 1.2mm +test point THT pad rectangle square +0 +1 +1 +TestPoint +TestPoint_THTPad_3.0x3.0mm_Drill1.5mm +THT rectangular pad as test Point, square 3.0mm side length, hole diameter 1.5mm +test point THT pad rectangle square +0 +1 +1 +TestPoint +TestPoint_THTPad_4.0x4.0mm_Drill2.0mm +THT rectangular pad as test Point, square 4.0mm side length, hole diameter 2.0mm +test point THT pad rectangle square +0 +1 +1 +TestPoint +TestPoint_THTPad_D1.0mm_Drill0.5mm +THT pad as test Point, diameter 1.0mm, hole diameter 0.5mm +test point THT pad +0 +1 +1 +TestPoint +TestPoint_THTPad_D1.5mm_Drill0.7mm +THT pad as test Point, diameter 1.5mm, hole diameter 0.7mm +test point THT pad +0 +1 +1 +TestPoint +TestPoint_THTPad_D2.0mm_Drill1.0mm +THT pad as test Point, diameter 2.0mm, hole diameter 1.0mm +test point THT pad +0 +1 +1 +TestPoint +TestPoint_THTPad_D2.5mm_Drill1.2mm +THT pad as test Point, diameter 2.5mm, hole diameter 1.2mm +test point THT pad +0 +1 +1 +TestPoint +TestPoint_THTPad_D3.0mm_Drill1.5mm +THT pad as test Point, diameter 3.0mm, hole diameter 1.5mm +test point THT pad +0 +1 +1 +TestPoint +TestPoint_THTPad_D4.0mm_Drill2.0mm +THT pad as test Point, diameter 4.0mm, hole diameter 2.0mm +test point THT pad +0 +1 +1 +Transformer_SMD +Pulse_P0926NL +SMT Gate Drive Transformer, 1:1:1, 8.0x6.3x5.3mm (https://productfinder.pulseeng.com/products/datasheets/SPM2007_61.pdf) +pulse pa0926nl +0 +6 +6 +Transformer_SMD +Pulse_PA1323NL +SMT Gate Drive Transformer, 1:1, 9.5x7.1x5.3mm (https://productfinder.pulseeng.com/products/datasheets/SPM2007_61.pdf) +pulse pa1323nl +0 +6 +6 +Transformer_SMD +Pulse_PA2001NL +SMT Gate Drive Transformer, 1:1, 8.6x6.7x2.5mm (https://productfinder.pulseeng.com/products/datasheets/P663.pdf) +pulse pa2001nl pe-68386nl +0 +4 +4 +Transformer_SMD +Pulse_PA2002NL-PA2008NL-PA2009NL +SMT Gate Drive Transformer, 1:1:1 or 2:1:1 or 2.5:1:1 or 1:1, 9.0x8.6x7.6mm (https://productfinder.pulseeng.com/products/datasheets/P663.pdf) +pulse pa2002nl pa2008nl pa2009nl p0544nl pa0184nl pa0297nl pa0510nl +0 +6 +6 +Transformer_SMD +Pulse_PA2004NL +SMT Gate Drive Transformer, 1:1:1, 8.6x6.7x3.6mm (https://productfinder.pulseeng.com/products/datasheets/P663.pdf) +pulse pa2004nl pa0264nl +0 +6 +6 +Transformer_SMD +Pulse_PA2005NL +SMT Gate Drive Transformer, 1:1:1, 11.8x8.8x4.0mm (https://productfinder.pulseeng.com/products/datasheets/P663.pdf) +pulse pa2005nl pa0173nl +0 +6 +6 +Transformer_SMD +Pulse_PA2006NL +SMT Gate Drive Transformer, 1:1, 11.8x8.8x4.0mm (https://productfinder.pulseeng.com/products/datasheets/P663.pdf) +pulse pa2006nl pa0186nl +0 +4 +4 +Transformer_SMD +Pulse_PA2007NL +SMT Gate Drive Transformer, 1:1, 9.0x8.6x7.6mm (https://productfinder.pulseeng.com/products/datasheets/P663.pdf) +pulse pa2007nl +0 +4 +4 +Transformer_SMD +Pulse_PA2777NL +SMT Gate Drive Transformer, 1:1, 7.1x6.1x5.5mm (https://productfinder.pulseeng.com/products/datasheets/SPM2007_61.pdf) +pulse pa2777nl +0 +8 +8 +Transformer_SMD +Pulse_PA3493NL +SMT Gate Drive Transformer, 1.25:1, 10.9x9.7x2.7mm (https://productfinder.pulseeng.com/products/datasheets/SPM2007_61.pdf) +pulse pa3493nl +0 +4 +4 +Transformer_SMD +Transformer_Coilcraft_CST1 +Current sense transformer, SMD, 8.0x8.13x5.3mm (https://www.coilcraft.com/pdfs/cst.pdf) +Transformer current sense SMD +0 +8 +8 +Transformer_SMD +Transformer_Coilcraft_CST2 +Current sense transformer, SMD, 8.0x8.13x5.3mm (https://www.coilcraft.com/pdfs/cst.pdf) +Transformer current sense SMD +0 +8 +8 +Transformer_SMD +Transformer_Coilcraft_CST2010 +Current sense transformer, SMD, 14.55x19.91x10.50mm (https://www.coilcraft.com/pdfs/cst2010.pdf) +Transformer current sense SMD +0 +12 +12 +Transformer_SMD +Transformer_CurrentSense_8.4x7.2mm +Transformer current sense SMD 8.4x7.2mm +Transformer current sense SMD +0 +8 +8 +Transformer_SMD +Transformer_Ethernet_Bel_S558-5999-T7-F +Ethernet Transformer, Bel S558-5999-T7-F, https://www.belfuse.com/resources/ICMs/lan-/S558-5999-T7-F.pdf +Ethernet Transformer +0 +16 +16 +Transformer_SMD +Transformer_Ethernet_Bourns_PT61017PEL +https://www.bourns.com/docs/Product-Datasheets/PT61017PEL.pdf +Transformer Ethernet Single Center-Tap +0 +16 +16 +Transformer_SMD +Transformer_Ethernet_Bourns_PT61020EL +10/100/1000 Base-T Transformer Module, PT61020EL (https://www.bourns.com/pdfs/PT61020.pdf) +Gigabit PoE Ethernet Transformer Single +0 +24 +24 +Transformer_SMD +Transformer_Ethernet_HALO_TG111-MSC13 +Transformer Ethernet SMD, https://www.haloelectronics.com/pdf/discrete-genesus.pdf +Transformer Ethernet SMD +0 +24 +24 +Transformer_SMD +Transformer_Ethernet_Halo_N2_SO-16_7.11x12.7mm +Halo N2 SO, 16 Pin (https://www.haloelectronics.com/pdf/discrete-ultra-100baset.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +Halo SO Transformer_SMD +0 +16 +16 +Transformer_SMD +Transformer_Ethernet_Halo_N5_SO-16_7.11x12.7mm +Halo N5 SO, 16 Pin (https://www.haloelectronics.com/pdf/discrete-ultra-100baset.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +Halo SO Transformer_SMD +0 +16 +16 +Transformer_SMD +Transformer_Ethernet_Halo_N6_SO-16_7.11x14.73mm +Halo N6 SO, 16 Pin (https://www.haloelectronics.com/pdf/discrete-ultra-100baset.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +Halo SO Transformer_SMD +0 +16 +16 +Transformer_SMD +Transformer_Ethernet_Wuerth_749013011A +Ethernet Transformer, Wuerth 749013011A, https://www.we-online.com/katalog/datasheet/749013011A.pdf +Ethernet Transformer +0 +16 +16 +Transformer_SMD +Transformer_Ethernet_YDS_30F-51NL_SO-24_7.1x15.1mm +YDS 30F-51NL SO, 24 Pin (https://datasheet.lcsc.com/lcsc/1811051610_Shanghai-YDS-Tech-30F-51NL_C123168.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py +YDS SO Transformer_SMD +0 +24 +24 +Transformer_SMD +Transformer_MACOM_SM-22 +https://cdn.macom.com/datasheets/ETC1-1-13.pdf +RF Transformer +0 +5 +5 +Transformer_SMD +Transformer_MiniCircuits_AT224-1A +SMD RF transformer, 50 ohm, 4.5 to 3000Mhz, https://www.minicircuits.com/pdfs/TC1-1-13M+.pdf +RF Transformer +0 +5 +5 +Transformer_SMD +Transformer_Murata_78250JC +Murata 78250JC https://www.murata-ps.com/datasheet?/data/magnetics/kmp_78250j.pdf +Murata transformer +0 +6 +6 +Transformer_SMD +Transformer_NF_ETAL_P2781 +NF-Transformer, ETAL, P2781, SMD, +NF-Transformer ETAL P2781 SMD +0 +8 +7 +Transformer_SMD +Transformer_NF_ETAL_P2781_HandSoldering +NF-Transformer, ETAL, P2781, SMD, Handsoldering +NF-Transformer ETAL P2781 SMD Handsoldering +0 +8 +7 +Transformer_SMD +Transformer_NF_ETAL_P3000 +NF-Reansformer, ETAL, P3000, SMD, +NF-Reansformer ETAL P3000 SMD +0 +15 +13 +Transformer_SMD +Transformer_NF_ETAL_P3000_HandSoldering +NF-Reansformer, ETAL, P3000, SMD, Handsoldering, +NF-Reansformer ETAL P3000 SMD Handsoldering +0 +15 +13 +Transformer_SMD +Transformer_NF_ETAL_P3181 +NF-Transformer, ETAL, P3181, SMD, +NF-Transformer ETAL P3181 SMD +0 +7 +6 +Transformer_SMD +Transformer_NF_ETAL_P3181_HandSoldering +NF-Transformer, ETAL, P3181, SMD, Hand Soldering, +NF-Transformer ETAL P3181 SMD Hand Soldering +0 +7 +6 +Transformer_SMD +Transformer_NF_ETAL_P3188 +NF-Transformer, ETAL, P3188, SMD, +NF-Transformer ETAL P3188 SMD +0 +8 +6 +Transformer_SMD +Transformer_NF_ETAL_P3188_HandSoldering +NF-Transformer, ETAL, P3188, SMD, Handsoldering, +NF-Transformer ETAL P3188 SMD Handsoldering +0 +8 +6 +Transformer_SMD +Transformer_NF_ETAL_P3191 +NF-Transformer, ETAL, P3191, SMD, +NF-Transformer ETAL P3191 SMD +0 +8 +6 +Transformer_SMD +Transformer_NF_ETAL_P3191_HandSoldering +NF-Transformer, ETAL, P3191, SMD, Handsoldering, +NF-Transformer ETAL P3191 SMD Handsoldering +0 +8 +6 +Transformer_SMD +Transformer_Pulse_H1100NL +For H1100NL, H1101NL, H1102NL, H1121NL, H1183NL, H1199NL, HX1188NL, HX1198NL and H1302NL. https://productfinder.pulseeng.com/doc_type/WEB301/doc_num/H1102NL/doc_part/H1102NL.pdf +H1100NL H1101NL H1102NL H1121NL H1183NL H1199NL HX1188NL HX1198NL H1302N +0 +16 +16 +Transformer_SMD +Transformer_Wuerth_750315371 +Power Transformer, horizontal core with bobbin, 6 pin, 2.54mm pitch, 11.24mm row spacing, 12.6x8.3x4.1mm +transformer flyback +0 +6 +6 +Transformer_SMD +Transformer_Wurth_WE-AGDT-EP7 +WE-AGDT Auxiliary Gate Drive Transformer EP7, https://www.we-online.com/components/products/datasheet/750319177.pdf +auxiliary gate drive transformer +0 +8 +8 +Transformer_THT +Autotransformer_Toroid_1Tap_Horizontal_D9.0mm_Amidon-T30 +Autotransformer, Toroid, horizontal, laying, 1 Tap, Diameter 9mm, Amidon T30, +Autotransformer Toroid horizontal laying 1 Tap Diameter 9mm Amidon T30 +0 +3 +3 +Transformer_THT +Autotransformer_Toroid_1Tap_Horizontal_D10.5mm_Amidon-T37 +Autotransformer, Toroid, horizontal, laying, 1 Tap, Diameter 10,5mm, Amidon T37, +Autotransformer Toroid horizontal laying 1 Tap Diameter 10 5mm Amidon T37 +0 +3 +3 +Transformer_THT +Autotransformer_Toroid_1Tap_Horizontal_D12.5mm_Amidon-T44 +Autotransformer, Toroid, horizontal, laying, 1 Tap, Diameter 12,5mm, Amidon T44, +Autotransformer Toroid horizontal laying 1 Tap Diameter 12 5mm Amidon T44 +0 +3 +3 +Transformer_THT +Autotransformer_Toroid_1Tap_Horizontal_D14.0mm_Amidon-T50 +Choke, Inductance, Autotransformer, Toroid, horizontal, laying, 1 Tap, Diameter 14mm, Amidon T50, +Choke Inductance Autotransformer Toroid horizontal laying 1 Tap Diameter 14mm Amidon T50 +0 +3 +3 +Transformer_THT +Autotransformer_ZS1052-AC +Ignition coil for xenon flash, http://www.excelitas.com/downloads/ZS1052ACH.pdf +ignition coil autotransformer +0 +3 +3 +Transformer_THT +Transformer_37x44 +transformer 37x44mm² +transformer 37x44mm² +0 +12 +4 +Transformer_THT +Transformer_Breve_TEZ-22x24 +http://www.breve.pl/pdf/ANG/TEZ_ang.pdf +TEZ PCB Transformer +0 +7 +7 +Transformer_THT +Transformer_Breve_TEZ-28x33 +http://www.breve.pl/pdf/ANG/TEZ_ang.pdf +TEZ PCB Transformer +0 +9 +9 +Transformer_THT +Transformer_Breve_TEZ-35x42 +http://www.breve.pl/pdf/ANG/TEZ_ang.pdf +TEZ PCB Transformer +0 +9 +9 +Transformer_THT +Transformer_Breve_TEZ-38x45 +http://www.breve.pl/pdf/ANG/TEZ_ang.pdf +TEZ PCB Transformer +0 +9 +9 +Transformer_THT +Transformer_Breve_TEZ-44x52 +http://www.breve.pl/pdf/ANG/TEZ_ang.pdf +TEZ PCB Transformer +0 +10 +10 +Transformer_THT +Transformer_Breve_TEZ-47x57 +http://www.breve.pl/pdf/ANG/TEZ_ang.pdf +TEZ PCB Transformer +0 +13 +13 +Transformer_THT +Transformer_CHK_EI30-2VA_1xSec +Trafo, Printtrafo, CHK, EI30, 2VA, 1x Sec,http://www.eratransformers.com/downloads/030-7585.0.pdf +Trafo Printtrafo CHK EI30 2VA 1x Sec +0 +10 +10 +Transformer_THT +Transformer_CHK_EI30-2VA_2xSec +Trafo, Printtrafo, CHK, EI30, 2VA, 2x Sec, +Trafo Printtrafo CHK EI30 2VA 2x Sec +0 +10 +10 +Transformer_THT +Transformer_CHK_EI30-2VA_Neutral +Trafo, Printtrafo, CHK, EI30, 2VA, neutral, +Trafo Printtrafo CHK EI30 2VA neutral +0 +10 +10 +Transformer_THT +Transformer_CHK_EI38-3VA_1xSec +Trafo, Printtrafo, CHK, EI38, 3VA, 1x Sec, http://www.eratransformers.com/product-detail/20 +Trafo Printtrafo CHK EI38 3VA 1x Sec +0 +10 +10 +Transformer_THT +Transformer_CHK_EI38-3VA_2xSec +Trafo, Printtrafo, CHK, EI38, 3VA, 2x Sec, http://www.eratransformers.com/product-detail/20 +Trafo Printtrafo CHK EI38 3VA 2x Sec +0 +10 +10 +Transformer_THT +Transformer_CHK_EI38-3VA_Neutral +Trafo, Printtrafo, CHK, EI38, 3VA, neutral, http://www.eratransformers.com/product-detail/20 +Trafo Printtrafo CHK EI42 3VA neutral +0 +10 +10 +Transformer_THT +Transformer_CHK_EI42-5VA_1xSec +Trafo, Printtrafo, CHK, EI42, 5VA, 1x Sec, +Trafo Printtrafo CHK EI42 5VA 1x Sec +0 +10 +10 +Transformer_THT +Transformer_CHK_EI42-5VA_2xSec +Trafo, Printtrafo, CHK, EI42, 5VA, 2x Sec, +Trafo Printtrafo CHK EI42 5VA 2x Sec +0 +10 +10 +Transformer_THT +Transformer_CHK_EI42-5VA_Neutral +Trafo, Printtrafo, CHK, EI42, 5VA, neutral, +Trafo Printtrafo CHK EI42 5VA neutral +0 +10 +10 +Transformer_THT +Transformer_CHK_EI48-8VA_1xSec +Trafo, Printtrafo, CHK, EI48, 8VA, 1x Sec, http://www.eratransformers.com/product-detail/18 +Trafo Printtrafo CHK EI48 8VA 1x Sec +0 +12 +12 +Transformer_THT +Transformer_CHK_EI48-8VA_2xSec +Trafo, Printtrafo, CHK, EI48, 8VA, 2x Sec, http://www.eratransformers.com/product-detail/18 +Trafo Printtrafo CHK EI48 8VA 2x Sec +0 +12 +12 +Transformer_THT +Transformer_CHK_EI48-8VA_Neutral +Trafo, Printtrafo, CHK, EI48, 8VA, neutral, http://www.eratransformers.com/product-detail/18 +Trafo Printtrafo CHK EI48 8VA neutral +0 +12 +12 +Transformer_THT +Transformer_CHK_EI48-10VA_1xSec +Trafo, Printtrafo, CHK, EI48, 10VA, 1x Sec, +Trafo Printtrafo CHK EI48 10VA 1x Sec +0 +12 +12 +Transformer_THT +Transformer_CHK_EI48-10VA_2xSec +Trafo, Printtrafo, CHK, EI48, 10VA, 2x Sec, http://www.eratransformers.com/product-detail/18 +Trafo Printtrafo CHK EI48 10VA 2x Sec +0 +12 +12 +Transformer_THT +Transformer_CHK_EI48-10VA_Neutral +Trafo, Printtrafo, CHK, EI48, 10VA, neutral, http://www.eratransformers.com/product-detail/18 +Trafo Printtrafo CHK EI48 10VA neutral +0 +12 +12 +Transformer_THT +Transformer_CHK_EI54-12VA_1xSec +Trafo, Printtrafo, CHK, EI54, 12VA, 1x Sec,http://www.eratransformers.com/product-detail/19 +Trafo Printtrafo CHK EI54 12VA 1x Sec +0 +14 +14 +Transformer_THT +Transformer_CHK_EI54-12VA_2xSec +Trafo, Printtrafo, CHK, EI54, 12VA, 2x Sec,http://www.eratransformers.com/product-detail/19 +Trafo Printtrafo CHK EI54 12VA 2x Sec +0 +14 +14 +Transformer_THT +Transformer_CHK_EI54-12VA_Neutral +Trafo, Printtrafo, CHK, EI54, 12VA, neutral,http://www.eratransformers.com/product-detail/19 +Trafo Printtrafo CHK EI54 12VA neutral +0 +14 +14 +Transformer_THT +Transformer_CHK_EI54-16VA_1xSec +Trafo, Printtrafo, CHK, EI54, 16VA, 1x Sec,http://www.eratransformers.com/product-detail/19 +Trafo Printtrafo CHK EI54 16VA 1x Sec +0 +14 +14 +Transformer_THT +Transformer_CHK_EI54-16VA_2xSec +Trafo, Printtrafo, CHK, EI54, 16VA, 2x Sec,http://www.eratransformers.com/product-detail/19 +Trafo Printtrafo CHK EI54 16VA 2x Sec +0 +14 +14 +Transformer_THT +Transformer_CHK_EI54-16VA_Neutral +Trafo, Printtrafo, CHK, EI54, 16VA, neutral,http://www.eratransformers.com/product-detail/19 +Trafo Printtrafo CHK EI54 16VA neutral +0 +14 +14 +Transformer_THT +Transformer_CHK_UI30-4VA_Flat +Trafo, Flattrafo, CHK, UI30, 4VA, +Trafo Flattrafo CHK UI30 4VA +0 +16 +16 +Transformer_THT +Transformer_CHK_UI39-10VA_Flat +Trafo, Flattrafo, CHK, UI39, 10VA, +Trafo Flattrafo CHK UI39 10VA +0 +20 +20 +Transformer_THT +Transformer_Coilcraft_Q4434-B_Rhombus-T1311 +Transformator, Transformer, Flyback, Coilcraft Q4434-B, Rgombus T1311, +Transformator Transformer Flyback Coilcraft Q4434-B Rgombus T1311 +0 +8 +8 +Transformer_THT +Transformer_EPCOS_B66359A1013T_Horizontal +Transformer, Transformator, ETD29, 13 Pin, Horizontal, EPCOS-B66359A1013T, +Transformer Transformator ETD29 13 Pin Horizontal EPCOS-B66359A1013T +0 +13 +13 +Transformer_THT +Transformer_EPCOS_B66359J1014T_Vertical +Transformer, Transformator, ETD29, 14 Pin, Vertical, EPCOS-B66359J1014T, +Transformer Transformator ETD29 14 Pin Vertical EPCOS-B66359J1014T +0 +14 +14 +Transformer_THT +Transformer_Microphone_Lundahl_LL1538 +AUDIO TRAFO LUNDAHL, https://www.lundahltransformers.com/wp-content/uploads/datasheets/1538_8xl.pdf +AUDIO TRAFO LUNDAHL +0 +7 +7 +Transformer_THT +Transformer_Microphone_Lundahl_LL1587 +AUDIO TRAFO LUNDAHL, https://www.lundahltransformers.com/wp-content/uploads/datasheets/1587.pdf +AUDIO TRAFO LUNDAHL +0 +7 +7 +Transformer_THT +Transformer_Myrra_74040_Horizontal +Transformer, Transformator, ETD29, 13 Pin, Horizontal, Myrra-74040, +Transformer Transformator ETD29 13 Pin Horizontal Myrra-74040 +0 +13 +13 +Transformer_THT +Transformer_Myrra_EF20_7408x +EF20 flyback transformer,http://myrra.com/wp-content/uploads/2017/09/Datasheet-74087-74088-74089-rev-A.pdf +transformer flyback SMPS +0 +9 +9 +Transformer_THT +Transformer_Myrra_EI30-5_44000_Horizontal +Myrra 44000 series encapsulated transformer, 50/60Hz, EI 30-5, 0.6VA, 32.6 x 27.6 x 15.3mm, https://myrra.com/wp-content/uploads/2021/03/Catalogue-Myrra-2022-Final_compressed-5.pdf +Transformer THT Myrra +0 +6 +6 +Transformer_THT +Transformer_NF_ETAL_1-1_P1200 +NF-Transformer, 1:1, ETAL P1200,http://www.etalgroup.com/sites/default/files/products/P1200_April_2005.pdf +NF-Transformer 1to1 ETAL P1200 +0 +4 +4 +Transformer_THT +Transformer_NF_ETAL_P1165 +NF-Transformer, ETAL, P1165,http://www.etalgroup.com/sites/default/files/products/P1165_February_2006.pdf +NF-Transformer ETAL P1165 +0 +4 +4 +Transformer_THT +Transformer_NF_ETAL_P3324 +NF-Transformer, ETAL P3324,http://www.etalgroup.com/sites/default/files/products/P3324_April_2005.pdf +NF-Transformer ETAL P3324 +0 +4 +4 +Transformer_THT +Transformer_NF_ETAL_P3356 +NF-Transformer, ETAL P3356, http://www.etalgroup.com/sites/default/files/products/P3356_December_2005.pdf +NF-Transformer ETAL P3356 +0 +4 +4 +Transformer_THT +Transformer_Toroid_Horizontal_D9.0mm_Amidon-T30 +Transformer, Toroid, horizontal, laying, Diameter 9mm, Amidon, T30, +Transformer Toroid horizontal laying Diameter 9mm Amidon T30 +0 +4 +4 +Transformer_THT +Transformer_Toroid_Horizontal_D10.5mm_Amidon-T37 +Transformer, Toroid, horizontal, laying, Diameter 10,5mm, Amidon T37, +Transformer Toroid horizontal laying Diameter 10 5mm Amidon T37 +0 +4 +4 +Transformer_THT +Transformer_Toroid_Horizontal_D12.5mm_Amidon-T44 +Transformer, Toroid, horizontal, laying, Diameter 12,5mm, Amidon T44, +Transformer Toroid horizontal laying Diameter 12 5mm Amidon T44 +0 +4 +4 +Transformer_THT +Transformer_Toroid_Horizontal_D14.0mm_Amidon-T50 +Transformer, Toroid, horizontal, laying, Diameter 14mm, Amidon T50, +Transformer Toroid horizontal laying Diameter 14mm Amidon T50 +0 +4 +4 +Transformer_THT +Transformer_Toroid_Horizontal_D18.0mm +Transformer, Toroid, tapped, horizontal, laying, Diameter 18mm, +Transformer Toroid tapped horizontal laying Diameter 18mm +0 +5 +4 +Transformer_THT +Transformer_Toroid_Tapped_Horizontal_D9.0mm_Amidon-T30 +Transformer, Toroid, tapped, horizontal, laying, Diameter 9mm, Amidon, T30, +Transformer Toroid tapped horizontal laying Diameter 9mm Amidon T30 +0 +6 +6 +Transformer_THT +Transformer_Toroid_Tapped_Horizontal_D10.5mm_Amidon-T37 +Transformer, Toroid, tapped, horizontal, laying, Diameter 10,5mm, Amidon, T37, +Transformer Toroid tapped horizontal laying Diameter 10 5mm Amidon T37 +0 +6 +6 +Transformer_THT +Transformer_Toroid_Tapped_Horizontal_D12.5mm_Amidon-T44 +Transformer, Toroid, tapped, horizontal, laying, Diameter 12,5mm, Amidon, T44, +Transformer Toroid tapped horizontal laying Diameter 12 5mm Amidon T44 +0 +6 +6 +Transformer_THT +Transformer_Toroid_Tapped_Horizontal_D14.0mm_Amidon-T50 +Transformer, Toroid, tapped, horizontal, laying, Diameter 14mm, Amidon T50, +Transformer Toroid tapped horizontal laying Diameter 14mm Amidon T50 +0 +6 +6 +Transformer_THT +Transformer_Wuerth_750343373 +Transformer, horizontal core with bobbin, 10 pin, 3.81mm pitch, 15.24mm row spacing, 22x23x17.53mm (https://katalog.we-online.com/ctm/datasheet/750343373.pdf) +transformer flyback +0 +10 +10 +Transformer_THT +Transformer_Wuerth_760871131 +Transformer, horizontal core with bobbin, 14 pin, 2.49 mm pitch, 20 mm row spacing, 25x22.2x16mm https://www.we-online.com/catalog/datasheet/760871131.pdf +transformer flyback +0 +14 +14 +Transistor_Power +GaN_Systems_GaNPX-3_5x6.6mm_Drain2.93x0.6mm +GaN Systems GaNPX GS66502B Package, https://gansystems.com/wp-content/uploads/2020/04/GS66502B-DS-Rev-200402.pdf +ganpx gs66502b +0 +7 +3 +Transistor_Power +GaN_Systems_GaNPX-3_5x6.6mm_Drain3.76x0.6mm +GaN Systems GaNPX GS66504B Package, https://gansystems.com/wp-content/uploads/2020/04/GS66504B-DS-Rev-200402.pdf +ganpx gs66504b +0 +7 +3 +Transistor_Power +GaN_Systems_GaNPX-4_7x8.4mm +GaN Systems GaNPX GS66508B Package, https://gansystems.com/wp-content/uploads/2020/04/GS66508B-DS-Rev-200402.pdf +ganpx gs66508b +0 +15 +4 +Transistor_Power_Module +Infineon_AG-ECONO2 +28-lead TH, EconoPACK 2, same as Littelfuse_Package_H_XN2MM, https://www.infineon.com/dgdl/Infineon-FS75R07N2E4-DS-v02_00-en_de.pdf?fileId=db3a30432f5008fe012f52f916333979 +igbt diode module +0 +28 +28 +Transistor_Power_Module +Infineon_EasyPIM-1B +35-lead TH, EasyPIM 1B, https://www.infineon.com/dgdl/Infineon-FP10R06W1E3-DS-v02_01-en_de.pdf?fileId=db3a304412b407950112b43312285a63 +brifge rectifier igbt diode module +0 +23 +23 +Transistor_Power_Module +Infineon_EasyPIM-2B +35-lead TH, EasyPIM 2B, same as ST_ACEPACK-2-CIB, https://www.infineon.com/dgdl/Infineon-FP50R06W2E3-DS-v02_02-EN.pdf?fileId=db3a30431b3e89eb011b455c99987d24 +brifge rectifier igbt diode module +0 +35 +23 +Transistor_Power_Module +Littelfuse_Package_H_XBN2MM +24-lead TH, Package H, https://www.littelfuse.com/~/media/electronics/datasheets/power_semiconductors/littelfuse_power_semiconductor_igbt_module_mg1215h_xbn2mm_datasheet.pdf.pdf +brifge rectifier igbt diode module +0 +24 +24 +Transistor_Power_Module +Littelfuse_Package_H_XN2MM +28-lead TH, Package H, same as Infineon_AG-ECONO2, https://www.littelfuse.com/~/media/electronics/datasheets/power_semiconductors/littelfuse_power_semiconductor_igbt_module_mg1225h_xn2mm_datasheet.pdf.pdf +igbt diode module +0 +28 +28 +Transistor_Power_Module +Littelfuse_Package_W_XBN2MM +24-lead TH, Package W, https://www.littelfuse.com/~/media/electronics/datasheets/power_semiconductors/littelfuse_power_semiconductor_igbt_module_mg1250w_xbn2mm_datasheet.pdf.pdf +brifge rectifier igbt diode module +0 +35 +24 +Transistor_Power_Module +Littelfuse_Package_W_XN2MM +35-lead TH, Package W, https://www.littelfuse.com/~/media/electronics/datasheets/power_semiconductors/littelfuse_power_semiconductor_igbt_module_mg1275w_xn2mm_datasheet.pdf.pdf +igbt diode module +0 +35 +35 +Transistor_Power_Module +ST_ACEPACK-2-CIB +35-lead TH, ACEPACK 2 CIB, same as Infineon_EasyPIM-2B, https://www.st.com/resource/en/datasheet/a2c25s12m3.pdf +brifge rectifier igbt diode module +0 +35 +23 +Transistor_Power_Module +ST_ACEPACK-2-CIB_PressFIT +35-lead TH, ACEPACK 2 CIB, PressFIT, https://www.st.com/resource/en/datasheet/a2c50s65m2-f.pdf +brifge rectifier igbt diode module +0 +35 +23 +Transistor_Power_Module +ST_SDIP-25L +25-lead TH, SDIP-25L, https://www.st.com/resource/en/datasheet/stgips20k60.pdf +igbt diode module +0 +25 +25 +Valve +Valve_ECC-83-1 +Valve ECC-83-1 round pins +Valve ECC-83-1 round pins +0 +9 +9 +Valve +Valve_ECC-83-2 +Valve ECC-83-2 flat pins +Valve ECC-83-2 flat pins +0 +10 +9 +Valve +Valve_EURO +Valve Euro +Valve Euro +0 +7 +5 +Valve +Valve_Glimm +Valve Glimm +Valve Glimm +0 +2 +2 +Valve +Valve_Mini_G +Valve mini G +Valve mini G +0 +9 +7 +Valve +Valve_Mini_P +Valve mini P +Valve mini P +0 +7 +7 +Valve +Valve_Mini_Pentode_Linear +Mini-Pentode, 5-pin, e.g. JAN6418 +Valve Mini-Pentode 5-pin JAN6418 +0 +5 +5 +Valve +Valve_Noval_G +Valve NOVAL G +Valve NOVAL G +0 +11 +9 +Valve +Valve_Noval_P +Valve NOVAL P +Valve NOVAL P +0 +9 +9 +Valve +Valve_Octal +8-pin round valve +valve +0 +9 +8 +Varistor +RV_Disc_D7mm_W3.4mm_P5mm +Varistor, diameter 7mm, width 3.4mm, pitch 5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D7mm_W3.5mm_P5mm +Varistor, diameter 7mm, width 3.5mm, pitch 5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D7mm_W3.6mm_P5mm +Varistor, diameter 7mm, width 3.6mm, pitch 5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D7mm_W3.7mm_P5mm +Varistor, diameter 7mm, width 3.7mm, pitch 5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D7mm_W3.8mm_P5mm +Varistor, diameter 7mm, width 3.8mm, pitch 5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D7mm_W3.9mm_P5mm +Varistor, diameter 7mm, width 3.9mm, pitch 5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D7mm_W4.2mm_P5mm +Varistor, diameter 7mm, width 4.2mm, pitch 5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D7mm_W4.3mm_P5mm +Varistor, diameter 7mm, width 4.3mm, pitch 5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D7mm_W4.5mm_P5mm +Varistor, diameter 7mm, width 4.5mm, pitch 5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D7mm_W4.8mm_P5mm +Varistor, diameter 7mm, width 4.8mm, pitch 5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D7mm_W4.9mm_P5mm +Varistor, diameter 7mm, width 4.9mm, pitch 5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D7mm_W4mm_P5mm +Varistor, diameter 7mm, width 4mm, pitch 5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D7mm_W5.1mm_P5mm +Varistor, diameter 7mm, width 5.1mm, pitch 5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D7mm_W5.4mm_P5mm +Varistor, diameter 7mm, width 5.4mm, pitch 5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D7mm_W5.5mm_P5mm +Varistor, diameter 7mm, width 5.5mm, pitch 5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D7mm_W5.7mm_P5mm +Varistor, diameter 7mm, width 5.7mm, pitch 5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D9mm_W3.3mm_P5mm +Varistor, diameter 9mm, width 3.3mm, pitch 5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D9mm_W3.4mm_P5mm +Varistor, diameter 9mm, width 3.4mm, pitch 5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D9mm_W3.5mm_P5mm +Varistor, diameter 9mm, width 3.5mm, pitch 5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D9mm_W3.6mm_P5mm +Varistor, diameter 9mm, width 3.6mm, pitch 5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D9mm_W3.7mm_P5mm +Varistor, diameter 9mm, width 3.7mm, pitch 5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D9mm_W3.8mm_P5mm +Varistor, diameter 9mm, width 3.8mm, pitch 5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D9mm_W3.9mm_P5mm +Varistor, diameter 9mm, width 3.9mm, pitch 5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D9mm_W4.1mm_P5mm +Varistor, diameter 9mm, width 4.1mm, pitch 5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D9mm_W4.2mm_P5mm +Varistor, diameter 9mm, width 4.2mm, pitch 5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D9mm_W4.4mm_P5mm +Varistor, diameter 9mm, width 4.4mm, pitch 5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D9mm_W4.5mm_P5mm +Varistor, diameter 9mm, width 4.5mm, pitch 5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D9mm_W4.8mm_P5mm +Varistor, diameter 9mm, width 4.8mm, pitch 5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D9mm_W4mm_P5mm +Varistor, diameter 9mm, width 4mm, pitch 5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D9mm_W5.2mm_P5mm +Varistor, diameter 9mm, width 5.2mm, pitch 5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D9mm_W5.4mm_P5mm +Varistor, diameter 9mm, width 5.4mm, pitch 5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D9mm_W5.5mm_P5mm +Varistor, diameter 9mm, width 5.5mm, pitch 5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D9mm_W5.7mm_P5mm +Varistor, diameter 9mm, width 5.7mm, pitch 5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D9mm_W6.1mm_P5mm +Varistor, diameter 9mm, width 6.1mm, pitch 5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D12mm_W3.9mm_P7.5mm +Varistor, diameter 12mm, width 3.9mm, pitch 7.5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D12mm_W4.2mm_P7.5mm +Varistor, diameter 12mm, width 4.2mm, pitch 7.5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D12mm_W4.3mm_P7.5mm +Varistor, diameter 12mm, width 4.3mm, pitch 7.5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D12mm_W4.4mm_P7.5mm +Varistor, diameter 12mm, width 4.4mm, pitch 7.5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D12mm_W4.5mm_P7.5mm +Varistor, diameter 12mm, width 4.5mm, pitch 7.5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D12mm_W4.6mm_P7.5mm +Varistor, diameter 12mm, width 4.6mm, pitch 7.5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D12mm_W4.7mm_P7.5mm +Varistor, diameter 12mm, width 4.7mm, pitch 7.5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D12mm_W4.8mm_P7.5mm +Varistor, diameter 12mm, width 4.8mm, pitch 7.5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D12mm_W4mm_P7.5mm +Varistor, diameter 12mm, width 4mm, pitch 7.5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D12mm_W5.1mm_P7.5mm +Varistor, diameter 12mm, width 5.1mm, pitch 7.5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D12mm_W5.4mm_P7.5mm +Varistor, diameter 12mm, width 5.4mm, pitch 7.5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D12mm_W5.8mm_P7.5mm +Varistor, diameter 12mm, width 5.8mm, pitch 7.5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D12mm_W5mm_P7.5mm +Varistor, diameter 12mm, width 5mm, pitch 7.5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D12mm_W6.1mm_P7.5mm +Varistor, diameter 12mm, width 6.1mm, pitch 7.5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D12mm_W6.2mm_P7.5mm +Varistor, diameter 12mm, width 6.2mm, pitch 7.5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D12mm_W6.3mm_P7.5mm +Varistor, diameter 12mm, width 6.3mm, pitch 7.5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D12mm_W6.7mm_P7.5mm +Varistor, diameter 12mm, width 6.7mm, pitch 7.5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D12mm_W7.1mm_P7.5mm +Varistor, diameter 12mm, width 7.1mm, pitch 7.5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D12mm_W7.5mm_P7.5mm +Varistor, diameter 12mm, width 7.5mm, pitch 7.5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D12mm_W7.9mm_P7.5mm +Varistor, diameter 12mm, width 7.9mm, pitch 7.5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D15.5mm_W3.9mm_P7.5mm +Varistor, diameter 15.5mm, width 3.9mm, pitch 7.5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D15.5mm_W4.2mm_P7.5mm +Varistor, diameter 15.5mm, width 4.2mm, pitch 7.5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D15.5mm_W4.3mm_P7.5mm +Varistor, diameter 15.5mm, width 4.3mm, pitch 7.5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D15.5mm_W4.4mm_P7.5mm +Varistor, diameter 15.5mm, width 4.4mm, pitch 7.5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D15.5mm_W4.5mm_P7.5mm +Varistor, diameter 15.5mm, width 4.5mm, pitch 7.5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D15.5mm_W4.6mm_P7.5mm +Varistor, diameter 15.5mm, width 4.6mm, pitch 7.5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D15.5mm_W4.7mm_P7.5mm +Varistor, diameter 15.5mm, width 4.7mm, pitch 7.5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D15.5mm_W4.8mm_P7.5mm +Varistor, diameter 15.5mm, width 4.8mm, pitch 7.5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D15.5mm_W4.9mm_P7.5mm +Varistor, diameter 15.5mm, width 4.9mm, pitch 7.5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D15.5mm_W4mm_P7.5mm +Varistor, diameter 15.5mm, width 4mm, pitch 7.5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D15.5mm_W5.2mm_P7.5mm +Varistor, diameter 15.5mm, width 5.2mm, pitch 7.5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D15.5mm_W5.4mm_P7.5mm +Varistor, diameter 15.5mm, width 5.4mm, pitch 7.5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D15.5mm_W5.9mm_P7.5mm +Varistor, diameter 15.5mm, width 5.9mm, pitch 7.5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D15.5mm_W5mm_P7.5mm +Varistor, diameter 15.5mm, width 5mm, pitch 7.5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D15.5mm_W6.1mm_P7.5mm +Varistor, diameter 15.5mm, width 6.1mm, pitch 7.5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D15.5mm_W6.3mm_P7.5mm +Varistor, diameter 15.5mm, width 6.3mm, pitch 7.5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D15.5mm_W6.4mm_P7.5mm +Varistor, diameter 15.5mm, width 6.4mm, pitch 7.5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D15.5mm_W6.8mm_P7.5mm +Varistor, diameter 15.5mm, width 6.8mm, pitch 7.5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D15.5mm_W7.2mm_P7.5mm +Varistor, diameter 15.5mm, width 7.2mm, pitch 7.5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D15.5mm_W7.5mm_P7.5mm +Varistor, diameter 15.5mm, width 7.5mm, pitch 7.5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D15.5mm_W8mm_P7.5mm +Varistor, diameter 15.5mm, width 8mm, pitch 7.5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D15.5mm_W11mm_P7.5mm +Varistor, diameter 15.5mm, width 11mm, pitch 7.5mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D16.5mm_W6.7mm_P7.5mm +Varistor, diameter 16.5mm, width 6.7mm, pitch 5mm, https://katalog.we-online.de/pbs/datasheet/820542711.pdf +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D21.5mm_W4.3mm_P10mm +Varistor, diameter 21.5mm, width 4.3mm, pitch 10mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D21.5mm_W4.4mm_P10mm +Varistor, diameter 21.5mm, width 4.4mm, pitch 10mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D21.5mm_W4.5mm_P10mm +Varistor, diameter 21.5mm, width 4.5mm, pitch 10mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D21.5mm_W4.6mm_P10mm +Varistor, diameter 21.5mm, width 4.6mm, pitch 10mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D21.5mm_W4.7mm_P10mm +Varistor, diameter 21.5mm, width 4.7mm, pitch 10mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D21.5mm_W4.8mm_P10mm +Varistor, diameter 21.5mm, width 4.8mm, pitch 10mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D21.5mm_W4.9mm_P10mm +Varistor, diameter 21.5mm, width 4.9mm, pitch 10mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D21.5mm_W5.1mm_P10mm +Varistor, diameter 21.5mm, width 5.1mm, pitch 10mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D21.5mm_W5.3mm_P10mm +Varistor, diameter 21.5mm, width 5.3mm, pitch 10mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D21.5mm_W5.4mm_P10mm +Varistor, diameter 21.5mm, width 5.4mm, pitch 10mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D21.5mm_W5.6mm_P10mm +Varistor, diameter 21.5mm, width 5.6mm, pitch 10mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D21.5mm_W5.8mm_P10mm +Varistor, diameter 21.5mm, width 5.8mm, pitch 10mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D21.5mm_W5mm_P10mm +Varistor, diameter 21.5mm, width 5mm, pitch 10mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D21.5mm_W6.1mm_P7.5mm +varistor +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D21.5mm_W6.3mm_P10mm +Varistor, diameter 21.5mm, width 6.3mm, pitch 10mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D21.5mm_W6.5mm_P10mm +Varistor, diameter 21.5mm, width 6.5mm, pitch 10mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D21.5mm_W6.7mm_P10mm +Varistor, diameter 21.5mm, width 6.7mm, pitch 10mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D21.5mm_W6.8mm_P10mm +Varistor, diameter 21.5mm, width 6.8mm, pitch 10mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D21.5mm_W7.1mm_P10mm +Varistor, diameter 21.5mm, width 7.1mm, pitch 10mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D21.5mm_W7.5mm_P10mm +Varistor, diameter 21.5mm, width 7.5mm, pitch 10mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D21.5mm_W7.9mm_P10mm +Varistor, diameter 21.5mm, width 7.9mm, pitch 10mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D21.5mm_W8.4mm_P10mm +Varistor, diameter 21.5mm, width 8.4mm, pitch 10mm +varistor SIOV +0 +2 +2 +Varistor +RV_Disc_D21.5mm_W11.4mm_P10mm +Varistor, diameter 21.5mm, width 11.4mm, pitch 10mm +varistor SIOV +0 +2 +2 +Varistor +RV_Rect_V25S440P_L26.5mm_W8.2mm_P12.7mm +Varistor, V25S440P, https://www.littelfuse.com/media?resourcetype=datasheets&itemid=b410c42c-51d1-460e-b1d9-d105d93c9679&filename=littelfuse-varistor-ultramov25s-datasheet +varistor +0 +2 +2 +Varistor +Varistor_Panasonic_VF +Panasonic VF series varistor, 6x8mm body, 3.2mm height, https://mediap.industry.panasonic.eu/assets/imported/industrial.panasonic.com/cdbs/www-data/pdf/AWA0000/AWA0000C4.pdf +Varistor VF +0 +2 +2 +diode-zener +DIOAD950W60L350D150 +DO-35 (DO-204AH) +Diode +0 +2 +2 +diodes1N4148 +DIOAD1068W53L380D172 +1N4148 +Diode +0 +2 +2 +empreinte +SOIC127P599X175-8N + + +0 +8 +8 +hexInverter +SOIC127P780X190-14N +SOP14-P-300-1.27A- +Integrated Circuit +0 +14 +14 diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/render.png b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/render.png new file mode 100755 index 0000000..620bd93 Binary files /dev/null and b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/render.png differ diff --git a/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/sch_img.png b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/sch_img.png new file mode 100755 index 0000000..ee70d37 Binary files /dev/null and b/02_PRODUITS_PHYSIQUES/Microphone/Conception/talas_lite_v1/studio_mic_kicad/sch_img.png differ diff --git a/02_PRODUITS_PHYSIQUES/Microphone/SOURCING_COMPOSANTS.md b/02_PRODUITS_PHYSIQUES/Microphone/SOURCING_COMPOSANTS.md index cd0702a..f6b1edd 100644 --- a/02_PRODUITS_PHYSIQUES/Microphone/SOURCING_COMPOSANTS.md +++ b/02_PRODUITS_PHYSIQUES/Microphone/SOURCING_COMPOSANTS.md @@ -367,6 +367,87 @@ de ~50% par rapport a l'usinage a partir de barre pleine. - Faire usiner chez JLCCNC (10-30 EUR/unite) ou Xometry (30-80 EUR) - Corps aluminium anodise avec logo Talas grave +### 5.9 Liens concrets identifies (fouille 2026-04-13) + +> Recherche ciblee sur AliExpress, eBay, Made-in-China et Alibaba pour trouver +> des **corps vides** (sans electronique) a l'unite. Prix extraits des snippets +> de recherche — a reverifier avant commande, surtout cote frais de port et TVA. + +#### AliExpress (MOQ 1, expedition France) + +| Ref | Titre | Prix indicatif | Notes | Lien | +|-----|-------|----------------|-------|------| +| AE-01 | For DIY U 87 microphone body shell part high quality studio microphone part | a verifier | Corps style U87, listing recent | [item/1005005978739413](https://www.aliexpress.com/item/1005005978739413.html) | +| AE-02 | 20cm Light Gold Metal U87 Body Replacement + shockmount | ~49,99 USD | Longueur 20 cm, inclut support anti-choc, finition gold | [item/1005002276379642](https://www.aliexpress.com/item/1005002276379642.html) | + +**Note :** la methode actuelle (acheter un micro complet BM-800 a 10-15 EUR et le +vider) reste moins chere que ces corps vides a l'unite sur AliExpress. Les corps +vides AliExpress n'ont de sens que si on veut un style U87/U47 specifique. + +#### eBay (MOQ 1, expedition depuis la Chine) + +| Ref | Titre | Prix | Style | Lien | +|-----|-------|------|-------|------| +| EB-01 | Microphone Shell Large Diaphragm Metal Empty Tube Mic Body | **21,06 USD + 7,50 port = 28,56 USD** | Generique LDC | [itm/146352881640](https://www.ebay.com/itm/146352881640) | +| EB-02 | 1pc Big Metal Microphone Body Large similar DIY U87 + shockmount | **34,82 USD** (1 pc) / **30,64 USD** (qty 4+) | U87 style, avec shockmount. ⚠ Montants internes cylindriques : PCB fixe par corde, pas par vis | [itm/205012805853](https://www.ebay.com/itm/205012805853) | +| EB-03 | DIY Condenser Microphone Body Custom Mic Shell Design TF47 | **45,99 USD + 2 USD port** | Style TF47/Telefunken | [itm/125820751204](https://www.ebay.com/itm/125820751204) | +| EB-04 | Multiplecolor Metal Mic phone Body Condenser Microphone Case | a verifier | Couleurs multiples | [itm/115340957416](https://www.ebay.com/itm/115340957416) | +| EB-05 | 24CM HTT-U47 Big Silver Metal Microphone Body DIY 47 Condenser Mic Shell | a verifier | Longueur 24 cm, style U47 | [itm/125866809751](https://www.ebay.com/itm/125866809751) | +| EB-06 | Condenser Tube Microphone Body DIY TF12 Replacement | a verifier | Style tube mic TF12 | [itm/115786652410](https://www.ebay.com/itm/115786652410) | +| EB-07 | DIY microphone body replace little u47 condenser | a verifier | Petit U47 | [itm/127338630934](https://www.ebay.com/itm/127338630934) | + +**Point dur eBay :** la plupart des vendeurs sont en Chine, meme delai qu'AliExpress, +mais prix unitaires 2 a 3x plus eleves. A reserver au prototypage quand il faut +un style precis. + +#### Made-in-China.com (le moins cher a l'unite identifie) + +| Ref | Titre | Prix | MOQ | Materiau | Lien | +|-----|-------|------|-----|----------|------| +| MIC-01 | DIY U Style 87 47 103 TF11/33/51 Condenser Microphone Body (Cast Sound Lighting, Guangzhou) | **7,85 - 55,75 USD** selon modele/finition | **1 piece** | Cuivre + Aluminium | [castsoundlight.en.made-in-china.com](https://castsoundlight.en.made-in-china.com/product/WmHYzLaZJRpO/China-DIY-U-Style-87-47-103-TF11-33-51-Condenser-Microphone-Body-Large-Cardioid-Microphone-87-Condenser-Mic-Shell-Tube.html) | + +**C'est le meilleur candidat identifie a l'unite :** 7,85 USD bas de gamme pour un +corps vide, MOQ 1, fournisseur Guangdong note 4,7/5, capacite 500 000 pcs/mois. +Contact a prendre pour confirmer : +- Dimensions exactes (diametre interieur, longueur, pas de vis grille) +- Disponibilite version aluminium seul (sans cuivre) pour RoHS +- Frais de port France et delai + +#### Alibaba — MaiAo (diy-microphone.com) + +| Ref | Titre | Prix degressifs | Notes | +|-----|-------|-----------------|-------| +| AB-01 | U47 DIY Studio Microphone Body Shell Chrome Plated | 3-49 pcs : **37,99 USD** / 50-99 : **35,99** / 100-1999 : **34,99** / 2000+ : **29,99** | Style U47, chrome, livre avec shockmount | + +Cher par rapport au "vider un BM-800", mais si on veut un corps U47 de qualite +en petit lot, c'est la reference chinoise structuree (la meme boutique est +derriere diy-microphone.com, citee dans la section 5.3). + +#### 1688.com — la piste vraiment low-cost (confirmee) + +Les recherches anglophones ne font pas remonter de prix 1688 concrets car la +plateforme est en chinois pur et bloque les agents hors-Chine. **La seule voie +pour acceder aux ~0,70-2 EUR/piece reste l'agent d'achat (Superbuy, CSSBuy, +Basetao).** Termes de recherche deja listes en section 5.2. + +#### Synthese des prix concrets (2026-04-13) + +| Source | Prix unitaire | MOQ | Quand l'utiliser | +|--------|---------------|-----|------------------| +| **BM-800 complet AliExpress a vider** *(baseline actuelle)* | **10-15 EUR** | 1 | Proto unitaire, workflow deja valide | +| **Made-in-China MIC-01** (Cast Sound Lighting) | **7,85-55,75 USD** | 1 | A verifier en priorite — potentiellement moins cher que BM-800 complet | +| eBay EB-01 (generique LDC) | 28,56 USD port inclus | 1 | Proto si style specifique | +| eBay EB-02 (U87 + shockmount) | 30-35 USD | 1 | Si on veut shockmount inclus | +| AliExpress AE-02 (U87 gold 20cm) | ~49,99 USD | 1 | Proto esthetique U87 | +| Alibaba MaiAo AB-01 | 30-38 USD degressif | 3 | Petits lots style U47 qualite | +| **1688.com via agent** | **~1 EUR** | 50 | Premiere serie de production | + +**Actions a faire avant de commander (priorite haute) :** +1. Mesurer precisement le corps du prototype P1 actuel (diametre interieur, + longueur, pas de vis grille) — voir section "Phase 1" ci-dessous +2. Contacter Cast Sound Lighting via Made-in-China pour obtenir dimensions + devis +3. Ouvrir un compte agent 1688 (Superbuy ou CSSBuy) pour preparer la phase serie + --- ## 6. Packaging diff --git a/02_PRODUITS_PHYSIQUES/Microphone/tests/TEST.aup3 b/02_PRODUITS_PHYSIQUES/Microphone/tests/TEST.aup3 new file mode 100644 index 0000000..f5a73d0 Binary files /dev/null and b/02_PRODUITS_PHYSIQUES/Microphone/tests/TEST.aup3 differ diff --git a/02_PRODUITS_PHYSIQUES/Microphone/tests/TEST.wav b/02_PRODUITS_PHYSIQUES/Microphone/tests/TEST.wav new file mode 100644 index 0000000..7a67cd9 Binary files /dev/null and b/02_PRODUITS_PHYSIQUES/Microphone/tests/TEST.wav differ diff --git a/02_PRODUITS_PHYSIQUES/Microphone/tests/long.aup3 b/02_PRODUITS_PHYSIQUES/Microphone/tests/long.aup3 index dce1aad..2bd152f 100644 Binary files a/02_PRODUITS_PHYSIQUES/Microphone/tests/long.aup3 and b/02_PRODUITS_PHYSIQUES/Microphone/tests/long.aup3 differ diff --git a/02_PRODUITS_PHYSIQUES/Microphone/tests/long.aup3-shm b/02_PRODUITS_PHYSIQUES/Microphone/tests/long.aup3-shm deleted file mode 100644 index 4cda204..0000000 Binary files a/02_PRODUITS_PHYSIQUES/Microphone/tests/long.aup3-shm and /dev/null differ diff --git a/02_PRODUITS_PHYSIQUES/Microphone/tests/long.aup3-wal b/02_PRODUITS_PHYSIQUES/Microphone/tests/long.aup3-wal deleted file mode 100644 index 61eb64a..0000000 Binary files a/02_PRODUITS_PHYSIQUES/Microphone/tests/long.aup3-wal and /dev/null differ
+
+
+
+ +
+ + + +
+ +
+ + + + + + + InteractiveHtmlBom + + + +
+
+
+ + + +
+
+ + + +
+
+ + + +
+
+ +
+ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +
Board statsFrontBackTotal
Components~~~
Groups~~~
SMD pads~~~
TH pads~
+ + + + + + + +
Checkboxes
+
+
+
+ +
+
+
Save board image
+
+ + X + +
+ +
+ + +
+
+
+ Config and checkbox state +
+ + +
+
+
+ Save bom table as +
+ + +
+
+
+
+
+
+ + + + + + + + + + + +
+ Title + + Revision +
+ Company + + Date +
+
+
+
+
+
+ + +
+ +
+
+
+ + + + + +
+
+
+
+
+ + + + +
+
+
+
+ + + + +
+
+
+
+